WorldWideScience

Sample records for survey butte member

  1. Assessment of undiscovered oil and gas resources in the Uteland Butte Member of the Eocene Green River Formation, Uinta Basin, Utah

    Science.gov (United States)

    Johnson, Ronald C.; Birdwell, Justin E.; Mercier, Tracey J.; Brownfield, Michael E.; Charpentier, Ronald R.; Klett, Timothy R.; Leathers, Heidi M.; Schenk, Christopher J.; Tennyson, Marilyn E.

    2015-09-03

    Using a geology-based assessment methodology, the U.S. Geological Survey estimated mean undiscovered resources of 214 million barrels of oil, 329 billion cubic feet of associated/dissolved natural gas, and 14 million barrels of natural gas liquids in the informal Uteland Butte member of the Green River Formation, Uinta Basin, Utah.

  2. ALA Salary Survey: Personal Members

    Science.gov (United States)

    American Libraries, 1971

    1971-01-01

    A survey of the members of the American Library Association revealed that the principal salary determinants are academic degree, type of employer and sex. The obvious differences in the earnings of men and women is not only found in the early experience years but any narrowing which does take place in the wage gap seems to take place at the…

  3. Merging high resolution geophysical and geochemical surveys to reduce exploration risk at glass buttes, Oregon

    Energy Technology Data Exchange (ETDEWEB)

    Walsh, Patrick [Ormat Nevada, Inc., Reno, NV (United States); Fercho, Steven [Ormat Nevada, Inc., Reno, NV (United States); Perkin, Doug [Ormat Nevada, Inc., Reno, NV (United States); Martini, Brigette [Corescan Inc., Ascot (Australia); Boshmann, Darrick [Oregon State Univ., Corvallis, OR (United States)

    2015-06-01

    The engineering and studies phase of the Glass Buttes project was aimed at reducing risk during the early stages of geothermal project development. The project’s inclusion of high resolution geophysical and geochemical surveys allowed Ormat to evaluate the value of these surveys both independently and in combination to quantify the most valuable course of action for exploration in an area where structure, permeability, and temperature are the most pressing questions. The sizes of the thermal anomalies at Glass Buttes are unusually large. Over the course of Phase I Ormat acquired high resolution LIDAR data to accurately map fault manifestations at the surface and collected detailed gravity and aeromagnetic surveys to map subsurface structural features. In addition, Ormat collected airborne hyperspectral data to assist with mapping the rock petrology and mineral alteration assemblages along Glass Buttes faults and magnetotelluric (MT) survey to try to better constrain the structures at depth. Direct and indirect identification of alteration assemblages reveal not only the geochemical character and temperature of the causative hydrothermal fluids but can also constrain areas of upflow along specific fault segments. All five datasets were merged along with subsurface lithologies and temperatures to predict the most likely locations for high permeability and hot fluids. The Glass Buttes temperature anomalies include 2 areas, totaling 60 km2 (23 mi2) of measured temperature gradients over 165° C/km (10° F/100ft). The Midnight Point temperature anomaly includes the Strat-1 well with 90°C (194 °F) at 603 m (1981 ft) with a 164 °C/km (10°F/100ft) temperature gradient at bottom hole and the GB-18 well with 71°C (160 °F) at 396 m (1300 ft) with a 182°C/km (11°F/100ft) gradient. The primary area of alteration and elevated temperature occurs near major fault intersections associated with Brothers Fault Zone and Basin and Range systems. Evidence for faulting is

  4. Does formal mentoring for faculty members matter? A survey of clinical faculty members.

    Science.gov (United States)

    Mylona, Elza; Brubaker, Linda; Williams, Valerie N; Novielli, Karen D; Lyness, Jeffrey M; Pollart, Susan M; Dandar, Valerie; Bunton, Sarah A

    2016-06-01

    Mentoring relationships, for all medical school faculty members, are an important component of lifelong development and education, yet an understanding of mentoring among medical school clinical faculty members is incomplete. This study examined associations between formal mentoring relationships and aspects of faculty members' engagement and satisfaction. It then explored the variability of these associations across subgroups of clinical faculty members to understand the status of mentoring and outcomes of mentoring relationships. The authors hypothesised that academic clinical faculty members currently in formal mentoring relationships experience enhanced employee engagement and satisfaction with their department and institution. Medical school faculty members at 26 self-selected USA institutions participated in the 2011-2014 Faculty Forward Engagement Survey. Responses from clinical faculty members were analysed for relationships between mentoring status and perceptions of engagement by faculty members. Of the 11 953 clinical faculty respondents, almost one-third reported having a formal mentoring relationship (30%; 3529). Most mentored faculty indicated the relationship was important (86%; n = 3027), and over three-fourths were satisfied with their mentoring experience (77%; n = 2722). Mentored faculty members across ranks reported significantly higher levels of satisfaction and more positive perceptions of their roles in the organisation. Faculty members who were not receiving mentoring reported significantly less satisfaction with their workplace environment and lower overall satisfaction. Mentored clinical faculty members have significantly greater satisfaction with their department and institution. This multi-institutional study provides evidence that fostering mentoring opportunities may facilitate faculty members' satisfaction and engagement, which, in turn, may help medical schools retain high-quality faculty staff committed to the multidimensional

  5. Environmental Survey preliminary report, Idaho National Engineering Laboratory, Idaho Falls, Idaho and Component Development and Integration Facility, Butte, Montana

    International Nuclear Information System (INIS)

    1988-09-01

    This report presents the preliminary findings of the first phase of the Environmental Survey of the United States Department of Energy's (DOE) Idaho National Engineering Laboratory (INEL) and Component Development and Integration Facility (CDIF), conducted September 14 through October 2, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. The team includes outside experts supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the INEL and CDIF. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations' carried on at the INEL and the CDIF, and interviews with site personnel. The Survey team developed a Sampling and Analysis (S ampersand A) Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The S ampersand A Plan will be executed by the Oak Ridge National Laboratory. When completed, the S ampersand A results will be incorporated into the INEL/CDIF Survey findings for inclusion into the Environmental Survey Summary Report. 90 refs., 95 figs., 77 tabs

  6. Environmental Survey preliminary report, Idaho National Engineering Laboratory, Idaho Falls, Idaho and Component Development and Integration Facility, Butte, Montana

    Energy Technology Data Exchange (ETDEWEB)

    1988-09-01

    This report presents the preliminary findings of the first phase of the Environmental Survey of the United States Department of Energy's (DOE) Idaho National Engineering Laboratory (INEL) and Component Development and Integration Facility (CDIF), conducted September 14 through October 2, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. The team includes outside experts supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the INEL and CDIF. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations' carried on at the INEL and the CDIF, and interviews with site personnel. The Survey team developed a Sampling and Analysis (S A) Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The S A Plan will be executed by the Oak Ridge National Laboratory. When completed, the S A results will be incorporated into the INEL/CDIF Survey findings for inclusion into the Environmental Survey Summary Report. 90 refs., 95 figs., 77 tabs.

  7. Interview with Gavin Butt

    DEFF Research Database (Denmark)

    Hasse Jørgensen, Stina; Alexandra Sofie, Jönsson

    2008-01-01

    We have interviewed Gavin Butt about his research interest in the cross-field between performance and performativity in the visual arts: queer theory, queer cultures and their histories, post-second world war U.S. art, contemporary art and critical theory.......We have interviewed Gavin Butt about his research interest in the cross-field between performance and performativity in the visual arts: queer theory, queer cultures and their histories, post-second world war U.S. art, contemporary art and critical theory....

  8. American Thoracic Society member survey on climate change and health.

    Science.gov (United States)

    Sarfaty, Mona; Bloodhart, Brittany; Ewart, Gary; Thurston, George D; Balmes, John R; Guidotti, Tee L; Maibach, Edward W

    2015-02-01

    The American Thoracic Society (ATS), in collaboration with George Mason University, surveyed a random sample of ATS members to assess their perceptions of, clinical experiences with, and preferred policy responses to climate change. An e-mail containing an invitation from the ATS President and a link to an online survey was sent to 5,500 randomly selected U.S. members; up to four reminder e-mails were sent to nonrespondents. Responses were received from members in 49 states and the District of Columbia (n = 915); the response rate was 17%. Geographic distribution of respondents mirrored that of the sample. Survey estimates' confidence intervals were ±3.5% or smaller. Results indicate that a large majority of ATS members have concluded that climate change is happening (89%), that it is driven by human activity (68%), and that it is relevant to patient care ("a great deal"/"a moderate amount") (65%). A majority of respondents indicated they were already observing health impacts of climate change among their patients, most commonly as increases in chronic disease severity from air pollution (77%), allergic symptoms from exposure to plants or mold (58%), and severe weather injuries (57%). A larger majority anticipated seeing these climate-related health impacts in the next 2 decades. Respondents indicated that physicians and physician organizations should play an active role in educating patients, the public, and policy makers on the human health effects of climate change. Overall, ATS members are observing that human health is already adversely affected by climate change and support responses to address this situation.

  9. Geology of Gable Mountain-Gable Butte Area

    International Nuclear Information System (INIS)

    Fecht, K.R.

    1978-09-01

    Gable Mountain and Gable Butte are two ridges which form the only extensive outcrops of the Columbia River Basalt Group in the central portion of the Pasco Basin. The Saddle Mountains Basalt and two interbedded sedimentary units of the Ellensburg Formation crop out on the ridges. These include, from oldest to youngest, the Asotin Member (oldest), Esquatzel Member, Selah Interbed, Pomona Member, Rattlesnake Ridge Interbed, and Elephant Mountain Member (youngest). A fluvial plain composed of sediments from the Ringold and Hanford (informal) formations surrounds these ridges. The structure of Gable Mountain and Gable Butte is dominated by an east-west-trending major fold and northwest-southeast-trending parasitic folds. Two faults associated with the uplift of these structures were mapped on Gable Mountain. The geomorphic expression of the Gable Mountain-Gable Butte area resulted from the comlex folding and subsequent scouring by post-basalt fluvial systems

  10. National Survey of Veterans, Active Duty Service Members, Demobilized National Guard and Reserve Members, Family Members, and Surviving Spouses

    Data.gov (United States)

    Department of Veterans Affairs — The 2010 National Survey of Veterans (NSV) is the sixth in a series of comprehensive nationwide surveys designed to help the Department of Veterans Affairs (VA) plan...

  11. [Even cigarette butts can impact environment and health: preliminary considerations].

    Science.gov (United States)

    Martino, Gianrocco; Gorini, Giuseppe; Chellini, Elisabetta

    2013-01-01

    In Italy, every year about 72 billion of cigarette butts are thrown away in the environment. Cigarette butts represent 50% of the wastes of urban areas (parks, roads) in the world, and 40% of Mediterranean Sea wastes. In particular, total polluting load is constituted of 1,872 Bq millions of Polonium-210, assuming 75 mBq per cigarette butt, and 1,800 tons of volatile organic compounds. As a matter of fact, according to several surveys, cigarette butts are considered by smokers and non-smokers as a common and acceptable waste in the environment. In 2008, European Union issued a Directive on wastes considering the «extended producer responsibility» (i.e., every industry is liable for costs of collection, transport and disposal of its own products). In October 2012, the Italian Parliament proposed a bill that classifies cigarette butts as special wastes in the frame of this responsibility. It could be interesting in the future to follow the legislative process of that bill in the Italian Parliament in order to show how strong it will be supported.

  12. Predicting health plan member retention from satisfaction surveys: the moderating role of intention and complaint voicing.

    Science.gov (United States)

    Huppertz, John W

    2008-01-01

    Many health plans have tried to increase member retention by improving their scores on customer satisfaction surveys. However, prior research has demonstrated weak relationships between member satisfaction and retention, suggesting that other variables are needed to understand how satisfaction impacts member retention. In a longitudinal study 4,806 health plan members who completed satisfaction surveys were re-assessed three years later; we compared measures of satisfaction, intention, and complaining behavior from voluntary disenrollees and retained members. The relationship between satisfaction and retention was moderated by members' intentions to disenroll. The findings suggest that health plans can enhance the predictive validity of their satisfaction surveys by including measures of both satisfaction and intentions.

  13. Chlamydia control in Europe - a survey of Member States

    DEFF Research Database (Denmark)

    Andersen, Berit; van Bergen, J; Ward, H

    ), contributed to the design and interpretation of the survey, commented on the draft report and approved the final report. Shelagh Redmond (Institute of Social and Preventive Medicine, University of Bern, Bern, Switzerland) provided technical support. Nicola Low (University of Bern) led the Chlamydia Control...

  14. Isolated intrauterine growth restriction: a survey of Central Association of Obstetricians Gynecologists (CAOG) members

    NARCIS (Netherlands)

    Chauhan, Suneet P.; Dahlke, Joshua D.; Magann, Everett F.; Chang, Eugene; Gupta, Lata; Mol, Ben W.; Lewis, David F.

    2013-01-01

    The objective was to ascertain clinicians' opinions and current management with isolated (no concomitant morbidity) intrauterine growth restriction (IUGR). Members of the Central Association of Obstetricians and Gynecologists (CAOG) were surveyed. We considered consensus to be agreement among 90% of

  15. 2004 Workplace and Gender Relations Survey of Reserve Component Members: Tabulations of Responses

    National Research Council Canada - National Science Library

    2005-01-01

    The 2004 Workplace and Gender Relations Survey of Reserve Component Members was designed to both estimate the level of sexual harassment and provide information on a variety of consequences of sexual harassment...

  16. Relating Training to Job Satisfaction: A Survey of Online Faculty Members

    Science.gov (United States)

    Hoekstra, Brian

    2014-01-01

    The purpose of this study was to determine whether training affected the job satisfaction reported by online faculty members. A convenience sample of 492 Iowa Community College Online Consortium (ICCOC) faculty members were invited to participate in a quantitative survey, and 148 responded. Overall Job Satisfaction was operationalized through the…

  17. A SURVEY FOR NEW MEMBERS OF THE TAURUS STAR-FORMING REGION WITH THE SLOAN DIGITAL SKY SURVEY

    International Nuclear Information System (INIS)

    Luhman, K. L.; Mamajek, E. E.; Shukla, S. J.; Loutrel, N. P.

    2017-01-01

    Previous studies have found that ∼1 deg 2 fields surrounding the stellar aggregates in the Taurus star-forming region exhibit a surplus of solar-mass stars relative to denser clusters like IC 348 and the Orion Nebula Cluster. To test whether this difference reflects mass segregation in Taurus or a variation in the initial mass function, we have performed a survey for members of Taurus across a large field (∼40 deg 2 ) that was imaged by the Sloan Digital Sky Survey (SDSS). We obtained optical and near-infrared spectra of candidate members identified with those images and the Two Micron All Sky Survey, as well as miscellaneous candidates that were selected with several other diagnostics of membership. We have classified 22 of the candidates as new members of Taurus, which includes one of the coolest known members (M9.75). Our updated census of members within the SDSS field shows a surplus of solar-mass stars relative to clusters, although it is less pronounced than in the smaller fields toward the stellar aggregates that were surveyed for previously measured mass functions in Taurus. In addition to spectra of our new members, we include in our study near-IR spectra of roughly half of the known members of Taurus, which are used to refine their spectral types and extinctions. We also present an updated set of near-IR standard spectra for classifying young stars and brown dwarfs at M and L types.

  18. A SURVEY FOR NEW MEMBERS OF THE TAURUS STAR-FORMING REGION WITH THE SLOAN DIGITAL SKY SURVEY

    Energy Technology Data Exchange (ETDEWEB)

    Luhman, K. L. [Department of Astronomy and Astrophysics, The Pennsylvania State University, University Park, PA 16802 (United States); Mamajek, E. E. [Department of Physics and Astronomy, The University of Rochester, Rochester, NY 14627 (United States); Shukla, S. J. [Institute of Astronomy, Madingley Road, Cambridge CB3 0HA (United Kingdom); Loutrel, N. P., E-mail: kluhman@astro.psu.edu [eXtreme Gravity Institute, Department of Physics, Montana State University, Bozeman, MT 59715 (United States)

    2017-01-01

    Previous studies have found that ∼1 deg{sup 2} fields surrounding the stellar aggregates in the Taurus star-forming region exhibit a surplus of solar-mass stars relative to denser clusters like IC 348 and the Orion Nebula Cluster. To test whether this difference reflects mass segregation in Taurus or a variation in the initial mass function, we have performed a survey for members of Taurus across a large field (∼40 deg{sup 2}) that was imaged by the Sloan Digital Sky Survey (SDSS). We obtained optical and near-infrared spectra of candidate members identified with those images and the Two Micron All Sky Survey, as well as miscellaneous candidates that were selected with several other diagnostics of membership. We have classified 22 of the candidates as new members of Taurus, which includes one of the coolest known members (M9.75). Our updated census of members within the SDSS field shows a surplus of solar-mass stars relative to clusters, although it is less pronounced than in the smaller fields toward the stellar aggregates that were surveyed for previously measured mass functions in Taurus. In addition to spectra of our new members, we include in our study near-IR spectra of roughly half of the known members of Taurus, which are used to refine their spectral types and extinctions. We also present an updated set of near-IR standard spectra for classifying young stars and brown dwarfs at M and L types.

  19. THE TAURUS SPITZER SURVEY: NEW CANDIDATE TAURUS MEMBERS SELECTED USING SENSITIVE MID-INFRARED PHOTOMETRY

    International Nuclear Information System (INIS)

    Rebull, L. M.; Padgett, D. L.; McCabe, C.-E.; Noriega-Crespo, A.; Carey, S. J.; Brooke, T.; Hillenbrand, L. A.; Stapelfeldt, K. R.; Angione, J. R.; Huard, T.; Terebey, S.; Audard, M.; Baldovin-Saavedra, C.; Monin, J.-L.; Menard, F.; Bouvier, J.; Fukagawa, M.; Guedel, M.; Knapp, G. R.; Allen, L. E.

    2010-01-01

    We report on the properties of pre-main-sequence objects in the Taurus molecular clouds as observed in seven mid- and far-infrared bands with the Spitzer Space Telescope. There are 215 previously identified members of the Taurus star-forming region in our ∼44 deg 2 map; these members exhibit a range of Spitzer colors that we take to define young stars still surrounded by circumstellar dust (noting that ∼20% of the bona fide Taurus members exhibit no detectable dust excesses). We looked for new objects in the survey field with similar Spitzer properties, aided by extensive optical, X-ray, and ultraviolet imaging, and found 148 new candidate members of Taurus. We have obtained follow-up spectroscopy for about half the candidate sample, thus far confirming 34 new members, three probable new members, and 10 possible new members, an increase of 15%-20% in Taurus members. Of the objects for which we have spectroscopy, seven are now confirmed extragalactic objects, and one is a background Be star. The remaining 93 candidate objects await additional analysis and/or data to be confirmed or rejected as Taurus members. Most of the new members are Class II M stars and are located along the same cloud filaments as the previously identified Taurus members. Among non-members with Spitzer colors similar to young, dusty stars are evolved Be stars, planetary nebulae, carbon stars, galaxies, and active galactic nuclei.

  20. Protecting the privacy of family members in survey and pedigree research.

    Science.gov (United States)

    Botkin, J

    2001-01-10

    The recent controversy at Virginia Commonwealth University involving research ethics raises important and complex issues in survey and pedigree research. The primary questions are whether family members of survey respondents themselves become subjects of the project and if they are subjects whether informed consent must be obtained for investigators to retain private information on these individuals. This article provides an analysis of the ethical issues and regulatory standards involved in this debate for consideration by investigators and institutional review boards. The analysis suggests that strong protections for the rights and welfare of subjects and their family members can be incorporated into survey and pedigree research protocols without hindering projects with extensive consent requirements.

  1. The European Gaucher Alliance: a survey of member patient organisations' activities, healthcare environments and concerns.

    Science.gov (United States)

    Žnidar, Irena; Collin-Histed, Tanya; Niemeyer, Pascal; Parkkinen, Johanna; Lauridsen, Anne-Grethe; Zariņa, Sandra; Cohen, Yossi; Manuel, Jeremy

    2014-09-02

    The European Gaucher Alliance (EGA) was established in 1994 and constituted in 2008 as an umbrella group supporting patient organisations for Gaucher disease. Every two years, the EGA conducts a questionnaire survey of member associations to help develop its priorities and annual work programme. Results of the latest survey are presented. Between June 2012 and April 2013, the 36 members and associate members of the EGA were asked to complete a questionnaire detailing membership numbers, disease specific treatments used by patients, means of access to treatment, availability of treatment centres and home infusions, sources of support for patients with Gaucher disease, patient organisations' activities, collaborations, funding sources and any issues of concern. Questionnaires completed in 2012 were revised in January 2013 and responses analysed between July and September 2013. Thirty three members returned data on one or more questions. Findings identified inequalities in access to treatment both within and between members' countries. Three of 27 countries, for which data were available, relied totally on humanitarian aid for treatment and 6% of untreated patients in 20 countries were untreated because of funding issues, a situation many feared would worsen with deteriorating economic climates. Access to treatment and reimbursement represented 45% of members' concerns, while 35% related to access to specialist treatment centres, home infusions and doctors with expertise in Gaucher disease. Member associations' main activities centred on patient support (59% of responses) and raising awareness of Gaucher disease and patients' needs amongst the medical community, government and healthcare decision makers and the general public (34% of responses). Twenty one (78% of respondents) indicated they were the only source of help for Gaucher disease patients in their country. For many, activities were constrained by funds; two members had no external funding source. Activities

  2. Understanding Response Rates to Surveys About Family Members' Psychological Symptoms After Patients' Critical Illness.

    Science.gov (United States)

    Long, Ann C; Downey, Lois; Engelberg, Ruth A; Nielsen, Elizabeth; Ciechanowski, Paul; Curtis, J Randall

    2017-07-01

    Achieving adequate response rates from family members of critically ill patients can be challenging, especially when assessing psychological symptoms. To identify factors associated with completion of surveys about psychological symptoms among family members of critically ill patients. Using data from a randomized trial of an intervention to improve communication between clinicians and families of critically ill patients, we examined patient-level and family-level predictors of the return of usable surveys at baseline, three months, and six months (n = 181, 171, and 155, respectively). Family-level predictors included baseline symptoms of psychological distress, decisional independence preference, and attachment style. We hypothesized that family with fewer symptoms of psychological distress, a preference for less decisional independence, and secure attachment style would be more likely to return questionnaires. We identified several predictors of the return of usable questionnaires. Better self-assessed family member health status was associated with a higher likelihood and stronger agreement with a support-seeking attachment style with a lower likelihood, of obtaining usable baseline surveys. At three months, family-level predictors of return of usable surveys included having usable baseline surveys, status as the patient's legal next of kin, and stronger agreement with a secure attachment style. The only predictor of receipt of surveys at six months was the presence of usable surveys at three months. We identified several predictors of the receipt of surveys assessing psychological symptoms in family of critically ill patients, including family member health status and attachment style. Using these characteristics to inform follow-up mailings and reminders may enhance response rates. Copyright © 2017 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

  3. 2016 Workplace and Gender Relations Survey of Active Duty Members: Frequently Asked Questions

    Science.gov (United States)

    2017-05-01

    outstanding research that has had a clear impact on improving policy decisions practice or discourse, either in the public or private sectors .” 6. What...2017 2016 Workplace and Gender Relations Survey of Active Duty Members 433 | OPA Frequently Asked Questions 2016 Workplace and Gender Relations...OPA), has been conducting surveys of gender issues for the active duty military since 1988. RSSC uses scientific state of the art statistical

  4. Stress and Depressive Symptoms in Cancer Survivors and Their Family Members: Korea Community Health Survey, 2012.

    Science.gov (United States)

    Han, Mi Ah

    2017-09-01

    This study examined the prevalence of perceived stress and depressive symptoms in cancer survivors and their family members compared with subjects without cancer and without family members with cancer. The subjects of this cross-sectional study were adults ≥19 years old who participated in the 2012 Korea Community Health Survey. Stress and depressive symptoms in cancer survivors and their family members were assessed and compared to symptoms in control groups by chi-square tests and multiple logistic regression analyses. Of the 6783 cancer survivors, 26.9% and 8.7% reported having stress and depressive symptoms, respectively, and 27.7% and 5.9% of family members of cancer survivors reported having stress and depressive symptoms, respectively. Cancer survivors showed higher adjusted odds ratio (aOR) for stress (aOR = 1.26, 95% confidence interval (CI) = 1.16-1.37) and depressive symptoms (aOR = 1.82, 95% CI = 1.57-2.11) than subjects without cancer history. Family members of cancer survivors showed a higher OR for stress and depressive symptoms than subjects without a family member who survived cancer. Cancer survivors and family members of cancer survivors had more stress and depressive symptoms than controls. Careful management for cancer patients and their family members should include screening for stress and depression to improve mental health associated with cancer survivorship.

  5. Survey of Pediatric Infectious Diseases Society Members About Congenital Chagas Disease.

    Science.gov (United States)

    Edwards, Morven S; Abanyie, Francisca A; Montgomery, Susan P

    2018-01-01

    Participants in a survey about congenital Chagas disease, distributed electronically to Pediatric Infectious Diseases Society members, perceived having limited knowledge about congenital Trypanosoma cruzi infection. Most rarely or never consider the diagnosis in infants born to parents from Latin America. Improved awareness of congenital Chagas disease and assessment of at-risk infants is needed.

  6. Evaluation Use: Results from a Survey of U.S. American Evaluation Association Members

    Science.gov (United States)

    Fleischer, Dreolin N.; Christie, Christina A.

    2009-01-01

    This paper presents the results of a cross-sectional survey on evaluation use completed by 1,140 U.S. American Evaluation Association members. This study had three foci: evaluators' current attitudes, perceptions, and experiences related to evaluation use theory and practice, how these data are similar to those reported in a previous study…

  7. FIRE HAZARDS ANALYSIS - BUSTED BUTTE

    International Nuclear Information System (INIS)

    Longwell, R.; Keifer, J.; Goodin, S.

    2001-01-01

    The purpose of this fire hazards analysis (FHA) is to assess the risk from fire within individual fire areas at the Busted Butte Test Facility and to ascertain whether the DOE fire safety objectives are met. The objective, identified in DOE Order 420.1, Section 4.2, is to establish requirements for a comprehensive fire and related hazards protection program for facilities sufficient to minimize the potential for: (1) The occurrence of a fire related event. (2) A fire that causes an unacceptable on-site or off-site release of hazardous or radiological material that will threaten the health and safety of employees. (3) Vital DOE programs suffering unacceptable interruptions as a result of fire and related hazards. (4) Property losses from a fire and related events exceeding limits established by DOE. Critical process controls and safety class systems being damaged as a result of a fire and related events

  8. 2012 Workplace and Gender Relations Survey of Reserve Component Members (Survey Note No. 2013-002)

    Science.gov (United States)

    2013-01-18

    items regarding unwanted attempts to establish a sexual relationship – Sexual Coercion – four items regarding classic quid pro quo instances of...Department of Defense (DoD) continues to emphasize sexual assault and sexual harassment response and prevention in the Reserve components. This survey...survey assesses the prevalence of sexual assault and sexual harassment and other gender-related issues in the National Guard and Reserves. This

  9. 2012 Workplace and Gender Relations Survey of Active Duty Members (Survey Note No. 2013-002)

    Science.gov (United States)

    2013-01-18

    Attention – four items regarding unwanted attempts to establish a sexual relationship – Sexual Coercion – four items regarding classic quid pro quo ...of Defense (DoD) continues to emphasize sexual assault and sexual harassment response and prevention in the military. This survey note discusses...assault and sexual harassment in the active duty force. This survey note and accompanying briefing (Appendix) provide information on the prevalence

  10. 2012 Workplace and Gender Relations Survey of Active Duty Members. Survey Note and Briefing

    Science.gov (United States)

    2013-03-15

    items regarding unwanted attempts to establish a sexual relationship – Sexual Coercion – four items regarding classic quid pro quo instances of special...continues to emphasize sexual assault and sexual harassment response and prevention in the military. This survey note discusses findings from the... harassment in the active duty force. This survey note and accompanying briefing (Appendix) provide information on the prevalence rates of sexual

  11. A survey for low-mass stellar and substellar members of the Hyades open cluster

    Science.gov (United States)

    Melnikov, Stanislav; Eislöffel, Jochen

    2018-03-01

    Context. Unlike young open clusters (with ages 2MASS JHKs photometry Results: We present a photometric and proper motion survey covering 23.4 deg2 in the Hyades cluster core region. Using optical/IR colour-magnitude diagrams, we identify 66 photometric cluster member candidates in the magnitude range 14.m7 < I < 20.m5. The proper motion measurements are based on several all-sky surveys with an epoch difference of 60-70 yr for the bright objects. The proper motions allowed us to discriminate the cluster members from field objects and resulted in 14 proper motion members of the Hyades. We rediscover Hy 6 as a proper motion member and classify it as a substellar object candidate (BD) based on the comparison of the observed colour-magnitude diagram with theoretical model isochrones. Conclusions: With our results, the mass function of the Hyades continues to be shallow below 0.15 M⊙ indicating that the Hyades have probably lost their lowest mass members by means of dynamical evolution. We conclude that the Hyades core represents the "VLM/BD desert" and that most of the substeller objects may have already left the volume of the cluster.

  12. The Search for Hot Jupiters using Red Buttes Observatory

    Science.gov (United States)

    Sorber, Rebecca L.; Kar, Aman; Hancock, Daniel A.; Leuquire, Jacob D.; Suhaimi, Afiq; Kasper, David; Jang-Condell, Hannah

    2018-01-01

    The goal of this research is to use the University of Wyoming’s Red Buttes Observatory (RBO) to perform manual, remote, or automated observations of transiting exoplanet candidates. The data contributes to discovery of star systems that include never before identified exoplanets. RBO houses a 0.6-meter telescope and is located approximately 10 miles south of the University of Wyoming’s campus. Our targets are catalogued by the KELT (Kilodegree Extremely Little Telescope) Survey, a photometric search for transiting exoplanets around bright main sequence stars. The KELT Follow-up Network (KELT-FUN), a collaboration of small-aperture telescope users located all over the world, confirms new exoplanet candidates. As part of KELT-FUN, students use the RBO to monitor candidates identified by the KELT team. RBO typically detects transits around stars that are 8-12 in V magnitude, with transit durations of ~1-4 hours and full depth relative changes in brightness above 2 mmags. Using AstroImageJ, we process the data and we look for any indication of a transit occurrence in the processed lightcurve which might confirm the presence of the potential exoplanet. Our team has contributed over 50 light curves to KELT-FUN to date. We are able to compare our data with simultaneous observations by other members of KELT-FUN to maximize the utility of our observations. This project gives undergraduates an authentic scientific research experience, learning how to operate an observatory, process data, and participate in a scientific collaboration.

  13. A survey of family members' satisfaction with the services provided by hospice palliative care volunteers.

    Science.gov (United States)

    Claxton-Oldfield, Stephen; Gosselin, Natasha; Schmidt-Chamberlain, Kirsten; Claxton-Oldfield, Jane

    2010-05-01

    A total of 22 family members, whose deceased loved ones had used the services of a hospice palliative care volunteer, responded to a brief survey designed to assess the importance of the different kinds of support offered to them (family members) by the volunteer, their impressions of the volunteers' personal qualities/characteristics, their general experiences with the volunteer, and their overall satisfaction with the volunteer services. The kind of support that received the highest importance rating from family members was the opportunity to take a much-needed break from the demands of caring for their loved one, closely followed by emotional support, the volunteer spending time with them, and the volunteer providing them with information. Family members rated volunteers highly on a list of qualities/characteristics that exemplify individuals who are effective in this role. In all, 85% of the family members felt that their volunteer was well trained and 95% did not feel that their or their loved one's privacy had been invaded by having a volunteer. Overall, family members were very satisfied with the volunteer support they received. Some limitations of the study are discussed.

  14. The amazing vanishing Canadian dermatologist: results from the 2006 Canadian Dermatology Association member survey.

    Science.gov (United States)

    Chow, Eunice Y; Searles, Gordon E

    2010-01-01

    The 2006 Canadian Dermatology Association (CDA) member survey tracked the Canadian dermatology workforce. Information on use of nondermatologist extenders, impact of financial burden on practice style, and wait times was collected in the survey. To survey Canadian dermatologists for specialty-specific physician resource information including demographics, workload, and future career plans and compare it to results from the 2001 survey. In addition, to explore three other areas not covered in the previous survey: patient access to dermatologic care through wait times, the use of nondermatologist extenders, and potential impact of educational financial debt on practice styles. CDA members in 2006 were surveyed by mail. Follow-up mailings were done for nonresponders. Survey results were compared to those of the 2001 survey. Thirty-six percent (216 of 602) of Canadian dermatologists responded (70% in 2001). The national distribution was identical between surveys. The median age increased to 55 years; two-thirds of dermatologists are male. The median retirement age remained at 65 years. There was a shift from rural to urban practice locations; 78% practice in private offices. Three-fifths of dermatologists do mainly medical dermatology, a decrease between surveys. Pediatric dermatology decreased 10%, whereas surgical dermatology increased 52% between surveys. Fewer practitioners perform noninsured services, and half as many perform research or hospital consultations or teach medical students. Financial debt burden had no impact on selection of practice style. Median wait times for nonurgent consultations doubled from 5 to 10 weeks; follow-up visits increased from 4 to 5 weeks; noninsured consultations increased from 4 to 5 weeks. The national median wait time for a third available consultation appointment was 42 days (range 7-161 days). Seventeen percent of dermatologists reported using nondermatologist extenders. Training programs produce only 60% of new practitioners

  15. Perceived benefits and challenges of interprofessional education based on a multidisciplinary faculty member survey.

    Science.gov (United States)

    Lash, David Benjamin; Barnett, Mitchell J; Parekh, Nirali; Shieh, Anita; Louie, Maggie C; Tang, Terrill T-L

    2014-12-15

    To identify differences among faculty members in various health professional training programs in perceived benefits and challenges of implementing interprofessional education (IPE). A 19-item survey using a 5-point Likert scale was administered to faculty members across different health disciplines at a west coast, multicollege university with osteopathic medicine, pharmacy, and physician assistant programs. Sixty-two of 103 surveys (60.2%) were included in the study. Faculty members generally agreed that there were benefits of IPE on patient outcomes and that implementing IPE was feasible. However, group differences existed in belief that IPE improves care efficiency (p=0.001) and promotes team-based learning (p=0.001). Program divergence was also seen in frequency of stressing importance of IPE (p=0.009), preference for more IPE opportunities (p=0.041), and support (p=0.002) within respective college for IPE. Despite consensus among faculty members from 3 disciplines that IPE is invaluable to their curricula and training of health care students, important program level differences existed that would likely need to be addressed in advance IPE initiatives.

  16. Dormaier and Chester Butte 2007 Follow-up Habitat Evaluation Procedures Report.

    Energy Technology Data Exchange (ETDEWEB)

    Ashley, Paul R.

    2008-01-01

    Follow-up habitat evaluation procedures (HEP) analyses were conducted on the Dormaier and Chester Butte wildlife mitigation sites in April 2007 to determine the number of additional habitat units to credit Bonneville Power Administration (BPA) for providing funds to enhance, and maintain the project sites as partial mitigation for habitat losses associated with construction of Grand Coulee Dam. The Dormaier follow-up HEP survey generated 482.92 habitat units (HU) or 1.51 HUs per acre for an increase of 34.92 HUs over baseline credits. Likewise, 2,949.06 HUs (1.45 HUs/acre) were generated from the Chester Butte follow-up HEP analysis for an increase of 1,511.29 habitat units above baseline survey results. Combined, BPA will be credited with an additional 1,546.21 follow-up habitat units from the Dormaier and Chester Butte parcels.

  17. The use of local anesthesia during dental rehabilitations: a survey of AAPD members.

    Science.gov (United States)

    Townsend, Janice A; Martin, Ashla; Hagan, Joseph L; Needleman, Howard

    2013-01-01

    The purpose of this study was to document current practices among pediatric and general dentists who are members of the American Academy of Pediatric Dentistry (AAPD) regarding the use of local anesthesia (LA) on children undergoing dental rehabilitation under general anesthesia (GA). A survey was administered via e-mail to AAPD members to document the use of LA during dental rehabilitations under GA and the rationales for its use. A total of 952 of 5,599 members responded to this survey; 79 percent of respondents use LA at least part of the time during dental rehabilitations under GA. "Improved patient recovery" was the most commonly cited rationale for administering LA. Extraction of permanent and primary teeth were the two most common procedures cited for the use of LA, respectively. There is no consensus among the respondents on the use of local anesthesia during dental rehabilitation under general anesthesia, but the majority responded that it does play a role in their perioperative patient management.

  18. Trends in Orbital Decompression Techniques of Surveyed American Society of Ophthalmic Plastic and Reconstructive Surgery Members.

    Science.gov (United States)

    Reich, Shani S; Null, Robert C; Timoney, Peter J; Sokol, Jason A

    To assess current members of the American Society of Ophthalmic Plastic and Reconstructive Surgery (ASOPRS) regarding preference in surgical techniques for orbital decompression in Graves' disease. A 10-question web-based, anonymous survey was distributed to oculoplastic surgeons utilizing the ASOPRS listserv. The questions addressed the number of years of experience performing orbital decompression surgery, preferred surgical techniques, and whether orbital decompression was performed in collaboration with an ENT surgeon. Ninety ASOPRS members participated in the study. Most that completed the survey have performed orbital decompression surgery for >15 years. The majority of responders preferred a combined approach of floor and medial wall decompression or balanced lateral and medial wall decompression; only a minority selected a technique limited to 1 wall. Those surgeons who perform fat decompression were more likely to operate in collaboration with ENT. Most surgeons rarely remove the orbital strut, citing risk of worsening diplopia or orbital dystopia except in cases of optic nerve compression or severe proptosis. The most common reason given for performing orbital decompression was exposure keratopathy. The majority of surgeons perform the surgery without ENT involvement, and number of years of experience did not correlate significantly with collaboration with ENT. The majority of surveyed ASOPRS surgeons prefer a combined wall approach over single wall approach to initial orbital decompression. Despite the technological advances made in the field of modern endoscopic surgery, no single approach has been adopted by the ASOPRS community as the gold standard.

  19. Survey of International Members of the American Thoracic Society on Climate Change and Health.

    Science.gov (United States)

    Sarfaty, Mona; Kreslake, Jennifer; Ewart, Gary; Guidotti, Tee L; Thurston, George D; Balmes, John R; Maibach, Edward W

    2016-10-01

    The American Thoracic Society (ATS), in collaboration with George Mason University, surveyed international members of the society to assess perceptions, clinical experiences, and preferred policy responses related to global climate change. A recruitment email was sent by the ATS President in October 2015 to 5,013 international members. Subsequently, four reminder emails were sent to nonrespondents. Responses were received from 489 members in 68 countries; the response rate was 9.8%. Half of respondents reported working in countries in Asia (25%) or Europe (25%), with the remainder in South America (18%), North America (Canada and Mexico) (18%), Australia or New Zealand (9%), and Africa (6%). Survey estimate confidence intervals were ± 5% or smaller. A high percentage of international ATS survey respondents judged that climate change is happening (96%), that it is driven by human activity (70%), and that it is relevant to patient care ("a great deal"/"a moderate amount") (80%). A majority of respondents also indicated they are already observing health impacts of climate change among their patients; most commonly as increases in chronic disease severity from air pollution (88%), allergic symptoms from exposure to plants or mold (72%), and severe weather injuries (69%). An even larger majority anticipated seeing these climate-related health impacts in the next two decades. Respondents further indicated that physicians and physician organizations should play an active role in educating patients, the public, and policy makers on the human health effects of climate change. International ATS respondents, like their counterparts in the U.S., observed that human health is already adversely affected by climate change, and support responses to address this situation.

  20. Surveying multiple health professional team members within institutional settings: an example from the nursing home industry.

    Science.gov (United States)

    Clark, Melissa A; Roman, Anthony; Rogers, Michelle L; Tyler, Denise A; Mor, Vincent

    2014-09-01

    Quality improvement and cost containment initiatives in health care increasingly involve interdisciplinary teams of providers. To understand organizational functioning, information is often needed from multiple members of a leadership team since no one person may have sufficient knowledge of all aspects of the organization. To minimize survey burden, it is ideal to ask unique questions of each member of the leadership team in areas of their expertise. However, this risks substantial missing data if all eligible members of the organization do not respond to the survey. Nursing home administrators (NHA) and directors of nursing (DoN) play important roles in the leadership of long-term care facilities. Surveys were administered to NHAs and DoNs from a random, nationally representative sample of U.S. nursing homes about the impact of state policies, market forces, and organizational factors that impact provider performance and residents' outcomes. Responses were obtained from a total of 2,686 facilities (response rate [RR] = 66.6%) in which at least one individual completed the questionnaire and 1,693 facilities (RR = 42.0%) in which both providers participated. No evidence of nonresponse bias was detected. A high-quality representative sample of two providers in a long-term care facility can be obtained. It is possible to optimize data collection by obtaining unique information about the organization from each provider while minimizing the number of items asked of each individual. However, sufficient resources must be available for follow-up to nonresponders with particular attention paid to lower resourced, lower quality facilities caring for higher acuity residents in highly competitive nursing home markets. © The Author(s) 2014.

  1. Physicists' views on hadrontherapy: a survey of members of the Italian Association of Medical Physics (AIFM).

    Science.gov (United States)

    Giandini, Tommaso; Tenconi, Chiara; Carrara, Mauro; Ciocca, Mario; Russo, Stefania; Panaino, Costanza M V; Cattani, Federica; Ciardo, Delia; Morlino, Sara; Avuzzi, Barbara; Bedini, Nice; Villa, Sergio; Marvaso, Giulia; Romanelli, Paola; Hasegawa, Azusa; Vischioni, Barbara; Valvo, Francesca; Jereczek-Fossa, Barbara A; Orecchia, Roberto; Valdagni, Riccardo; Pignoli, Emanuele

    2017-09-18

    This study was based on a survey to investigate perceptions of hadrontherapy of the members of the Italian Association of Medical Physics (AIFM). The survey was digitally submitted to the 991 members between the end of January and the beginning of April 2016. A 19-item questionnaire was designed focusing on advantages and disadvantages of hadrontherapy, current status and possible future improvements, and need and opportunities for future investments in Italy and abroad. Information about professional qualifications, main fields of clinical involvement and specific competencies of the respondents was also collected. The survey was completed by 121 AIFM members (response rate 12.2%). In the answers collected, it was shown that medical physicists expressed interest in hadrontherapy mainly for reasons of personal interest rather than for professional needs (90% ± 2.5% vs. 52% ± 4.3% of the respondents, respectively), with a good knowledge of the related basic aspects as well as of the pros and cons of its application. However, poor knowledge of the current status of hadrontherapy was observed among the medical physicists not directly involved at a professional level, who were less than 3% of the physicists working in radiotherapy. In light of these results, the implementation of new training and education initiatives should be devised to promote a deeper and global knowledge of hadrontherapy-related issues, not only from a theoretical point of view but also in practical terms. Moreover, a close collaboration between highly specialized medical physicists employed in hadrontherapy centers and others in oncology hospitals should be -encouraged.

  2. 2012 Workplace and Gender Relations Survey of Reserve Component Members: Statistical Methodology Report

    Science.gov (United States)

    2012-09-01

    3,435 10,461 9.1 3.1 63 Unmarried with Children+ Unmarried without Children 439,495 0.01 10,350 43,870 10.1 2.2 64 Married with Children+ Married ...logistic regression model was used to predict the probability of eligibility for the survey (known eligibility vs . unknown eligibility). A second logistic...regression model was used to predict the probability of response among eligible sample members (complete response vs . non-response). CHAID (Chi

  3. Defining refractory migraine: results of the RHSIS Survey of American Headache Society members.

    Science.gov (United States)

    Schulman, Elliott A; Peterlin, B Lee; Lake, Alvin E; Lipton, Richard B; Hanlon, Alexandra; Siegel, Sherry; Levin, Morris; Goadsby, Peter J; Markley, Herbert G

    2009-04-01

    To gauge consensus regarding a proposed definition for refractory migraine proposed by Refractory Headache Special Interest Section, and where its use would be most appropriate. Headache experts have long recognized that a subgroup of headache sufferers remains refractory to treatment. Although different groups have proposed criteria to define refractory migraine, the definition remains controversial. The Refractory Headache Special Interest Section of the American Headache Society developed a definition through a consensus process, assisted by a literature review and initial membership survey. A 12-item questionnaire was distributed at the American Headache Society meeting in 2007 during a platform session and at the Refractory Headache Special Interest Section symposium. The same questionnaire was subsequently sent to all American Headache Society members via e-mail. A total of 151 responses from AHS members form the basis of this report. The survey instrument was designed using Survey Monkey. Frequencies and percentages of the survey were used to describe survey responses. American Headache Society members agreed that a definition for refractory migraine is needed (91%) that it should be added to the International Classification of Headache Disorders-2 (86%), and that refractory forms of non-migraine headache disorders should be defined (87%). Responders believed a refractory migraine definition would be of greatest value in selecting patients for clinical drug trials. The current refractory migraine definition requires a diagnosis of migraine, interference with function or quality of life despite modification of lifestyle factors, and adequate trials of acute and preventive medicines with established efficacy. The proposed criteria for the refractory migraine definition require failing 2 preventive medications to meet the threshold for failure. Although 42% of respondents agreed with the working definition of refractory migraine, 43% favored increasing the

  4. A survey of central association members about the definition, management, and complications of shoulder dystocia.

    Science.gov (United States)

    Gherman, Robert B; Chauhan, Suneet P; Lewis, David F

    2012-04-01

    To determine practice patterns for shoulder dystocia and concepts dealing with brachial plexus palsy. An Internet-based 25-question survey was electronically disseminated to all current members of the Central Association of Obstetricians and Gynecologists. For those individuals who did not respond, an additional opportunity to complete the assessment was provided during the 2009 annual meeting. Of 429 Central Association of Obstetricians and Gynecologists members, 268 (62%) responded, with 192 (78%) filling out the survey online. Nearly 90% of those queried believed that shoulder dystocia was unpredictable and unpreventable. Thirty-seven percent felt that an elective cesarean delivery should be offered for an estimated fetal weight of 4,500 g among nondiabetics. Just 40% would have allowed a trial of labor with a documented history of shoulder dystocia. Slightly more than half answered that they never used either lateral or excessive traction and obstetrician-gynecologists were more likely than maternal-fetal medicine specialists to conclude that traction applied by the clinician doing the delivery was the cause of shoulder dystocia-related brachial plexus palsy (36% compared with 12%, P=.005). Maternal-fetal medicine specialists were more likely to believe that 40-50% of brachial plexus palsies occur without concomitant shoulder dystocia (21% compared with 9%, P=.015). Differences in practice patterns exist among with regard to management recommendations of the American College of Obstetricians and Gynecologists' Practice Bulletin on shoulder dystocia. III.

  5. Search for extraterrestrial intelligence/high resolution microwave survey team member

    Science.gov (United States)

    Steffes, Paul G.

    1993-01-01

    This semiannual status report describes activities conducted by the Principal Investigator during the first half of this third year of the NASA High Resolution Microwave Survey (HRMS) Investigator Working Group (IWG). As a (HRMS) Team Member with primary interest in the Sky Survey activity, this investigator attended IWG meetings at NASA/Ames and U.C.-Santa Cruz in Apr. and Aug. 1992, and has traveled independently to NRAO/Kitt Peak, Arizona (April 1993) and Woodbury, Georgia (July 1993). During the July 1993 visit to the Georgia Tech Research Corporation/Woodbury Research Facility, an experiment was conducted to study the effects of interference from C-band (3.7 - 4.2 GHz) geostationary spacecraft on the Sky Survey operation in that band. At the first IWG meeting in April of this year, results of a SETI observation conducted at the 203 GHz positronium hyperfine resonance using the NRAO facility at Kitt Peak, AZ, were presented, as well as updates on the development of the spaceborne RFI data bases developed for the project. At the second meeting, results of the study of interference from C-band geostationary spacecraft were presented. Likewise, a presentation was made at the accompanying 1993 Bioastronomy Symposium describing the SETI observation at the positronium hyperfine resonance.

  6. Cervical bracing practices after degenerative cervical surgery: a survey of cervical spine research society members.

    Science.gov (United States)

    Lunardini, David J; Krag, Martin H; Mauser, Nathan S; Lee, Joon Y; Donaldson, William H; Kang, James D

    2018-05-21

    Context: Prior studies have shown common use of post-operative bracing, despite advances in modern day instrumentation rigidity and little evidence of brace effectiveness. To document current practice patterns of brace use after degenerative cervical spine surgeries among members of the Cervical Spine Research Society (CSRS), to evaluate trends, and to identify areas of further study. A questionnaire survey METHODS: A 10 question survey was sent to members of the Cervical Spine Research Society to document current routine bracing practices after various common degenerative cervical spine surgical scenarios, including fusion and non-fusion procedures. The overall bracing rate was 67%. This included 8.4% who used a hard collar in each scenario. Twenty-two percent of surgeons never used a hard collar, while 34% never used a soft collar, and 3.6% (3 respondents) did not use a brace in any surgical scenario. Bracing frequency for specific surgical scenarios varied from 39% after foraminotomy to 88% after multi-level corpectomy with anterior & posterior fixation. After one, two and three level anterior cervical discectomy & fusion (ACDF), bracing rates were 58%, 65% and 76% for an average of 3.3, 4.3 and 5.3 weeks, respectively. After single level corpectomy, 77% braced for an average of 6.2 weeks. After laminectomy and fusion, 72% braced for an average of 5.4 weeks. Significant variation persists among surgeons on the type and length of post-operative brace usage after cervical spine surgeries. Overall rates of bracing have not changed significantly with time. Given the lack evidence in the literature to support bracing, reconsidering use of a brace after certain surgeries may be warranted. Copyright © 2018. Published by Elsevier Inc.

  7. Patterns of Care for Craniopharyngioma: Survey of members of the American Association of Neurological Surgeons

    Science.gov (United States)

    Hankinson, Todd C.; Palmeri, Nicholas O.; Williams, Sarah A.; Torok, Michelle R.; Serrano, Cesar A.; Foreman, Nicholas K.; Handler, Michael H.; Liu, Arthur K.

    2014-01-01

    Background/Significance Initial therapy for craniopharyngioma remains controversial. Population-based datasets indicate that traditional algorithms (GTR versus STR +/− XRT) are often not employed. We investigated neurosurgical practice patterns. Methods A ten-question survey was electronically distributed to members of the American Association of Neurological Surgeons. Responses were analyzed using standard statistical techniques. Results One hundred-two responses were collected, with a median 25 craniopharyngiomas managed per respondent. 36% estimated their practice included ≥75% pediatrics and 61% had an academic practice. 36% would recommend observation or radiation therapy for a suspected craniopharyngioma in the absence of a tissue diagnosis, with 46% of these indicating this recommendation in ≥10% of cases. Following STR, 35% always recommend XRT and 59% recommend it in over half of cases. However, following STR or biopsy alone, 18% and 11% never recommend XRT. There was no association between type of practice (i.e. academic or ≥75% pediatrics) and practice patterns. Conclusions This survey verifies that deviation from established algorithms is common, underscoring the clinical complexity of these patients and recent secondary data analyses This should influence clinical researchers to investigate outcomes for patients treated using alternative methods. This will lend insight into appropriate treatment options and contribute to quality of life outcomes studies for craniopharyngioma. PMID:24577430

  8. [Survey on the medical mycology processes to the members of the French Society for Medical Mycology].

    Science.gov (United States)

    Kauffmann-Lacroix, C; Albouy-Llaty, M; Migeot, V; Contet-Audonneau, N

    2011-09-01

    The objective of the survey was to describe the practices of clinical laboratories in terms of cultures in medical mycology. We have implemented this project within the members of the French Society for Medical Mycology (SFMM) to evaluate the analytical processes of the mycological examination in our laboratories. This preliminary study would help to suggest the future French guidelines. A questionnaire regarding the processing of mycology analysis was sent to the 227 members of the SFMM in 2009. The data involved 21 types of samples, direct microscopic examination with or without colouring and the reagents, the number of culture media, the types of media (Sabouraud, Sabouraud antibiotic, Sabouraud cycloheximide and chromogenic medium), temperature and duration of the incubation (days) and the existence of a first result before the end of the incubation period. The analytical processes were compared to an accredited laboratory according to EN ISO 15189. A great heterogeneity was observed in the 36 forms from 27 (75%) laboratories belonging to university hospitals among the 38 existing in France. As for deep samples, two microscopic exams were performed, only one was usually done. A more sensitive technique was preferred to the wet-mount for some samples. Routine samples are often inoculated on a chromogenic media. For deep samples two medium are inoculated (chromogenic media, Sabouraud and antibiotics). If the temperature of incubation is unique, 30°C was chosen. A temperature of 37°C was preferred for samples where Candida spp. is selected. When there are two temperatures of incubation, 27°C and 37°C were preferred. Each biologist can compare his proceedings to the other laboratories and to a laboratory already accredited. The question is to find the best strategies for each medical mycology specimen. They will aid the process of accreditation according to EN ISO 15189, which now applies in all laboratories in Europe. Copyright © 2011 Elsevier Masson SAS

  9. Traditional medicine practices among community members with chronic kidney disease in northern Tanzania: an ethnomedical survey.

    Science.gov (United States)

    Stanifer, John W; Lunyera, Joseph; Boyd, David; Karia, Francis; Maro, Venance; Omolo, Justin; Patel, Uptal D

    2015-10-23

    In sub-Saharan Africa, chronic kidney disease (CKD) is being recognized as a non-communicable disease (NCD) with high morbidity and mortality. In countries like Tanzania, people access many sources, including traditional medicines, to meet their healthcare needs for NCDs, but little is known about traditional medicine practices among people with CKD. Therefore, we sought to characterize these practices among community members with CKD in northern Tanzania. Between December 2013 and June 2014, we administered a previously-developed survey to a random sample of adult community-members from the Kilimanjaro Region; the survey was designed to measure traditional medicine practices such as types, frequencies, reasons, and modes. Participants were also tested for CKD, diabetes, hypertension, and HIV as part of the CKD-AFRiKA study. To identify traditional medicines used in the local treatment of kidney disease, we reviewed the qualitative sessions which had previously been conducted with key informants. We enrolled 481 adults of whom 57 (11.9 %) had CKD. The prevalence of traditional medicine use among adults with CKD was 70.3 % (95 % CI 50.0-84.9 %), and among those at risk for CKD (n = 147; 30.6 %), it was 49.0 % (95 % CI 33.1-65.0 %). Among adults with CKD, the prevalence of concurrent use of traditional medicine and biomedicine was 33.2 % (11.4-65.6 %). Symptomatic ailments (66.7 %; 95 % CI 17.3-54.3), malaria/febrile illnesses (64.0 %; 95 % CI 44.1-79.9), and chronic diseases (49.6 %; 95 % CI 28.6-70.6) were the most prevalent uses for traditional medicines. We identified five plant-based traditional medicines used for the treatment of kidney disease: Aloe vera, Commifora africana, Cymbopogon citrullus, Persea americana, and Zanthoxylum chalybeum. The prevalence of traditional medicine use is high among adults with and at risk for CKD in northern Tanzania where they use them for a variety of conditions including other NCDs. Additionally, many of these same people

  10. The GALAH survey: chemical tagging of star clusters and new members in the Pleiades

    Science.gov (United States)

    Kos, Janez; Bland-Hawthorn, Joss; Freeman, Ken; Buder, Sven; Traven, Gregor; De Silva, Gayandhi M.; Sharma, Sanjib; Asplund, Martin; Duong, Ly; Lin, Jane; Lind, Karin; Martell, Sarah; Simpson, Jeffrey D.; Stello, Dennis; Zucker, Daniel B.; Zwitter, Tomaž; Anguiano, Borja; Da Costa, Gary; D'Orazi, Valentina; Horner, Jonathan; Kafle, Prajwal R.; Lewis, Geraint; Munari, Ulisse; Nataf, David M.; Ness, Melissa; Reid, Warren; Schlesinger, Katie; Ting, Yuan-Sen; Wyse, Rosemary

    2018-02-01

    The technique of chemical tagging uses the elemental abundances of stellar atmospheres to 'reconstruct' chemically homogeneous star clusters that have long since dispersed. The GALAH spectroscopic survey - which aims to observe one million stars using the Anglo-Australian Telescope - allows us to measure up to 30 elements or dimensions in the stellar chemical abundance space, many of which are not independent. How to find clustering reliably in a noisy high-dimensional space is a difficult problem that remains largely unsolved. Here, we explore t-distributed stochastic neighbour embedding (t-SNE) - which identifies an optimal mapping of a high-dimensional space into fewer dimensions - whilst conserving the original clustering information. Typically, the projection is made to a 2D space to aid recognition of clusters by eye. We show that this method is a reliable tool for chemical tagging because it can: (i) resolve clustering in chemical space alone, (ii) recover known open and globular clusters with high efficiency and low contamination, and (iii) relate field stars to known clusters. t-SNE also provides a useful visualization of a high-dimensional space. We demonstrate the method on a data set of 13 abundances measured in the spectra of 187 000 stars by the GALAH survey. We recover seven of the nine observed clusters (six globular and three open clusters) in chemical space with minimal contamination from field stars and low numbers of outliers. With chemical tagging, we also identify two Pleiades supercluster members (which we confirm kinematically), one as far as 6° - one tidal radius away from the cluster centre.

  11. A Survey of Accidental Hypothermia Knowledge among Navy Members in China and the Implications for Training

    Directory of Open Access Journals (Sweden)

    Shuang Li

    2016-03-01

    Full Text Available Objectives: Accidental hypothermia (AH is a potentially life-threatening condition that can lead to significant morbidity and life-long effects. Navy personnel are always at a greater risk of AH due to frequent outdoor work, wilderness exposure, prolonged immobility and exhaustion. The purpose of the survey was to assess Chinese Navy members’ awareness of AH and to make recommendations with regard to better measures for improving it. Methods: 111 Navy members completed a written questionnaire that was subsequently analyzed. Results: 30.6% of the respondents have experienced AH and 64.9% rated their knowledge of AH as “low” or “none”. Over half of them identified the initial symptom of AH as obvious shivering (69.4% and apathy (45.0%. As for the aggravate symptoms, 60.9% chose the wrong answer of more obvious shivering instead of the right one—absence of shivering (5.4%. In the case of the treatment of mild AH, more than half of the respondents chose the wrong answers. Conclusions: This study suggests that the basic skills of recognition and treatment of AH are inadequate in the Chinese Navy. Further work is required to develop a systematical, comprehensive and corresponding education method that would promote correct actions during AH.

  12. Ethics and professionalism in medical physics: A survey of AAPM members

    Science.gov (United States)

    Ozturk, Naim; Armato, Samuel G.; Giger, Maryellen L.; Serago, Christopher F.; Ross, Lainie F.

    2013-01-01

    Purpose: To assess current education, practices, attitudes, and perceptions pertaining to ethics and professionalism in medical physics. Methods: A link to a web-based survey was distributed to the American Association of Physicists in Medicine (AAPM) e-mail membership list, with a follow-up e-mail sent two weeks later. The survey included questions about ethics/professionalism education, direct personal knowledge of ethically questionable practices in clinical care, research, education (teaching and mentoring), and professionalism, respondents’ assessment of their ability to address ethical/professional dilemmas, and demographics. For analysis, reports of unethical or ethically questionable practices or behaviors by approximately 40% or more of respondents were classified as “frequent.” Results: Partial or complete responses were received from 18% (1394/7708) of AAPM members. Overall, 60% (827/1377) of the respondents stated that they had not received ethics/professionalism education during their medical physics training. Respondents currently in training were more likely to state that they received instruction in ethics/professionalism (80%, 127/159) versus respondents who were post-training (35%, 401/1159). Respondents’ preferred method of instruction in ethics/professionalism was structured periodic discussions involving both faculty and students/trainees. More than 90% (1271/1384) supported continuing education in ethics/professionalism and 75% (1043/1386) stated they would attend ethics/professionalism sessions at professional/scientific meetings. In the research setting, reports about ethically questionable authorship assignment were frequent (approximately 40%) whereas incidents of ethically questionable practices about human subjects protections were quite infrequent (5%). In the clinical setting, there was frequent recollection of incidents regarding lack of training, resources and skills, and error/incident reporting. In the educational setting

  13. Organizational Member Involvement in Physical Activity Coalitions across the United States: Development and Testing of a Novel Survey Instrument for Assessing Coalition Functioning

    Science.gov (United States)

    Bornstein, Daniel B.; Pate, Russell R.; Beets, Michael W.; Saunders, Ruth P.; Blair, Steven N.

    2015-01-01

    Introduction: Coalitions are often composed of member organizations. Member involvement is thought to be associated with coalition success. No instrument currently exists for evaluating organizational member involvement in physical activity coalitions. This study aimed to develop a survey instrument for evaluating organizational member involvement…

  14. A Report on the Survey of Public Relations Division/AEJ Members on Licensing Public Relations Practitioners.

    Science.gov (United States)

    Tennant, Frank A.

    The licensing of public relations practitioners by government has long been controversial. A survey was conducted of members of the public relations division of the Association for Education in Journalism under the auspices of the division's committee on professional freedom and responsibility. One-hundred and sixty-one questionnaires were mailed…

  15. Interest in international surgical volunteerism: results of a survey of members of the American Pediatric Surgical Association.

    Science.gov (United States)

    Butler, Marilyn W; Krishnaswami, Sanjay; Rothstein, David H; Cusick, Robert A

    2011-12-01

    This study assesses interest in international volunteer work by members of the American Pediatric Surgical Association (APSA) and attempts to identify demographics, motivations, obstacles, and institutional issues of the respondents. An online survey service was used to send a 25-question survey to all APSA members with email addresses in November 2009. An answer to all questions was not required. Written comments were encouraged. The survey was sent to 807 members of whom 316 responded, for a response rate of 39%. International work had been done previously by 48% of respondents, whereas 95% stated that they were interested or perhaps interested in doing so. Most (83%) were interested in operating with local surgeons to teach them how to perform procedures. Altruism was the chief motivation in 75% of respondents. Primary obstacles to doing international work were family obligations and lack of time, although 37% stated that a lack of information about volunteer opportunities was an issue. A significant number of respondents (48%) stated that their institution had no established international collaborations. This study suggests that there is interest in international volunteerism among many members of APSA. Understanding the issues surrounding surgical volunteerism may facilitate humanitarian involvement among pediatric surgeons. Copyright © 2011 Elsevier Inc. All rights reserved.

  16. 77 FR 12106 - Kapka Butte Sno-Park Construction

    Science.gov (United States)

    2012-02-28

    ... DEPARTMENT OF TRANSPORTATION Federal Highway Administration Kapka Butte Sno-Park Construction... Construction project. SUMMARY: The FHWA is issuing this notice to advise the public that the FHWA is officially designated as the Joint-Lead Agency pursuant to 23 U.S.C. 139(c)(1) for the Kapka Butte Sno-Park Construction...

  17. Exploring the Therapeutic Affordances of Self-Harm Online Support Communities: An Online Survey of Members.

    Science.gov (United States)

    Coulson, Neil S; Bullock, Emma; Rodham, Karen

    2017-10-13

    A growing number of online communities have been established to support those who self-harm. However, little is known about the therapeutic affordances arising from engagement with these communities and resulting outcomes. The aim of this study was to explore the presence of therapeutic affordances as reported by members of self-harm online support communities. In total, 94 respondents (aged 13-63 years, mean=23.5 years; 94% female) completed an online survey exploring their experiences of engaging with a self-harm online support community. Respondents varied in terms of how long they had been accessing an online community, with 22% (21/94) accessing less than 1 year, 39% (37/94) 1 to 2 years, 14% (13/94) 2 to 3 years, and 24.5% (23/94) more than 3 years. Responses were analyzed using deductive thematic analysis. The results of our analysis describe each of the five therapeutic affordances that were present in the data, namely (1) connection, the ability to make contact with others who self-harm for the purposes of mutual support and in so doing reduce feelings of loneliness and isolation; (2) adaptation, that is, how use of online support varies in relation to the personal circumstances of the individual user; (3) exploration, that is, the ability to learn about self-harm and learn about strategies to reduce or stop self-harming behavior; (4) narration, that is, the ability to share experiences, as well as read about the experiences of others; and (5) self-presentation, that is, how and what users present about themselves to others in the online community. Our findings suggest that engagement with self-harm online support communities may confer a range of therapeutic benefits for some users, which may serve to minimize the psychosocial burden of self-harm and promote positive coping strategies. In addition, the online nature of the support available may be helpful to those who are unable to access face-to-face support. ©Neil S Coulson, Emma Bullock, Karen Rodham

  18. Royal College surgical objectives of urologic training: A survey of faculty members from Canadian training programs

    Science.gov (United States)

    Zakaria, Ahmed S.; Haddad, Richard; Dragomir, Alice; Kassouf, Wassim; Andonian, Sero; Aprikian, Armen G.

    2014-01-01

    Introduction: According to the Royal College objectives of training in urology, urologic surgical procedures are divided as category A, B and C. We wanted to determine the level of proficiency required and achieved by urology training faculty for Royal College accreditation. Methods: We conducted a survey that was sent electronically to all Canadian urology training faculty. Questions focused on demographics (i.e., years of practice, geographic location, subspecialty, access to robotic surgery), operating room contact with residents, opinion on the level of proficiency required from a list of 54 surgical procedures, and whether their most recent graduates attained category A proficiency in these procedures. Results: The response rate was 43.7% (95/217). Among respondents, 92.6% were full timers, 21.1% practiced urology for less than 5 years and 3.2% for more than 30 years. Responses from Quebec and Ontario formed 69.4% (34.7% each). Of the respondents, 37.9% were uro-oncologists and 75.7% reported having access to robotic surgery. Sixty percent of faculty members operate with R5 residents between 2 to 5 days per month. When respondents were asked which categories should be listed as category A, only 8 procedures received 100% agreement. Also, results varied significantly when analyzed by sub-specialty. For example, almost 50% or more of uro-oncologists believed that radical cystectomy, anterior pelvic exenteration and extended pelvic lymphadenectomy should not be category A. The following procedures had significant disagreement suggesting the need for re-classification: glanular hypospadias repair, boari flap, entero-vesical and vesicovaginal fistulae repair. Overall, more than 80% of faculty reported that their recent graduating residents had achieved category A proficiency, in a subset of procedures. However, more than 50% of all faculty either disagreed or were ambivalent that all of their graduating residents were Category A proficient in several procedures

  19. Exploring the Therapeutic Affordances of Self-Harm Online Support Communities: An Online Survey of Members

    Science.gov (United States)

    Bullock, Emma

    2017-01-01

    Background A growing number of online communities have been established to support those who self-harm. However, little is known about the therapeutic affordances arising from engagement with these communities and resulting outcomes. Objective The aim of this study was to explore the presence of therapeutic affordances as reported by members of self-harm online support communities. Methods In total, 94 respondents (aged 13-63 years, mean=23.5 years; 94% female) completed an online survey exploring their experiences of engaging with a self-harm online support community. Respondents varied in terms of how long they had been accessing an online community, with 22% (21/94) accessing less than 1 year, 39% (37/94) 1 to 2 years, 14% (13/94) 2 to 3 years, and 24.5% (23/94) more than 3 years. Responses were analyzed using deductive thematic analysis. Results The results of our analysis describe each of the five therapeutic affordances that were present in the data, namely (1) connection, the ability to make contact with others who self-harm for the purposes of mutual support and in so doing reduce feelings of loneliness and isolation; (2) adaptation, that is, how use of online support varies in relation to the personal circumstances of the individual user; (3) exploration, that is, the ability to learn about self-harm and learn about strategies to reduce or stop self-harming behavior; (4) narration, that is, the ability to share experiences, as well as read about the experiences of others; and (5) self-presentation, that is, how and what users present about themselves to others in the online community. Conclusions Our findings suggest that engagement with self-harm online support communities may confer a range of therapeutic benefits for some users, which may serve to minimize the psychosocial burden of self-harm and promote positive coping strategies. In addition, the online nature of the support available may be helpful to those who are unable to access face

  20. 2004 Workplace and Gender Relations Survey of Reserve Component Members: Administration, Datasets, and Codebook

    National Research Council Canada - National Science Library

    2005-01-01

    .... The 2004 WGRR utilized both modes of administration-the Web as well as paper-and-pencil and was designed to document the extent to which Reserve members report experiencing unwanted, uninvited sexual...

  1. A survey of joint activities and travel of household members in the Greater Copenhagen Metropolitan Region

    DEFF Research Database (Denmark)

    Thorhauge, Mikkel; Vuk, Goran; Kaplan, Sigal

    2012-01-01

    and family quality time, within a daily schedule. The current study unveils the joint activity and travel patterns of household members in the Copenhagen area, as part of the ACTUM research project, funded by the Danish Strategic Research Council, for the development of a new generation of activity......The traditional approach for modeling transport-related choices in Denmark refers to individual decision makers. However, in daily activities and travel choices individuals function according to the commitments as family members, and thus their choices derive from the welfare needs of other family...... members. A family-based approach enables to capture intra-household interactions and the priorities of household members in scheduling their daily activities, thus adding to the realism and the predictive strength of transport models. Joint activities and travel occur in order to maximize efficiency...

  2. Communication between members of the cardiac arrest team--a postal survey.

    Science.gov (United States)

    Pittman, J; Turner, B; Gabbott, D A

    2001-05-01

    Effective communication enhances team building and is perceived to improve the quality of team performance. A recent publication from the Resuscitation Council (UK) has highlighted this fact and recommended that cardiac arrest team members make contact daily. We wished to identify how often members of this team communicate prior to a cardiopulmonary arrest. A questionnaire on cardiac arrest team composition, leadership, communication and debriefing was distributed nationally to Resuscitation Training Officers (RTOs) and their responses analysed. One hundred and thirty (55%) RTOs replied. Physicians and anaesthetists were the most prominent members of the team. The Medical Senior House Officer is usually nominated as the team leader. Eighty-seven centres (67%) have no communication between team members prior to attending a cardiopulmonary arrest. In 33%, communication occurs but is either informal or fortuitous. The RTOs felt that communication is important to enhance team dynamics and optimise task allocation. Only 7% achieve a formal debrief following a cardiac arrest. Communication between members of the cardiac arrest team before and after a cardiac arrest is poor. Training and development of these skills may improve performance and should be prioritised. Team leadership does not necessarily reflect experience or training.

  3. 78 FR 76285 - Proposed Information Collection; Comment Request; Panel Member Survey To Develop Indicators of...

    Science.gov (United States)

    2013-12-17

    ... mathematically. NOAA will apply the Delphi Method to a multi-round survey of panels of individuals with... gather this information, NOAA will conduct a multi-round, iterative survey process based on the Delphi Method, which is a structured method for eliciting and combining expert opinion. The method requires...

  4. The relationship between job performance and perceived organizational support in faculty members at Chinese universities: a questionnaire survey

    Science.gov (United States)

    2014-01-01

    Background Although several studies have been conducted to investigate the relationship between perceived organizational support (POS) and job performance (JP), it remains unclear whether this relationship is appropriate for faculty members at Chinese universities. The objectives of this study were to (a) examine the correlation between POS andJP; (b) identify the predictors of POS, including demographic and organizational characteristics among faculty members at a Chinese university; (c) investigate the influence of mediating factors between POS and JP; and (d) compare the findings of this study with related studies. Methods A cross-sectional questionnaire survey was used in this study. The questionnaire was administered to 700 faculty members who were randomly selected from all faculty members at six universities. A total of 581 questionnaires were obtained. A statistical model for JP was developed based on the literature review. Results The analysis results indicated that the relationship between POS and JP was mediated by job satisfaction (JS), positive affectivity (PA), and affective commitment (AC). In addition, procedural and distributive justice contribute to POS. Conclusions The study concludes that the relationship between POS and JP is mediated by JS, PA, and AC and is influenced by POS. These results can provide evidence for university administrators to improve POS and increase the JP of faculty members at universities. PMID:24624932

  5. Interactive Poster Survey Study of ACS Members' Knowledge and Needs on Research Ethics

    Science.gov (United States)

    Mabrouk, Patricia Ann; Schelble, Susan M.

    2018-01-01

    An interactive poster exhibited at two poster sessions at the Fall 2016 American Chemical Society (ACS) National Meeting was used as a vehicle to learn about ACS members' concerns and needs related to research ethics and to identify opportunities for engagement of the Society by the Committee on Ethics (ETHX) and others in terms of ethics…

  6. 2015 Workplace and Gender Relations Survey of Reserve Component Members: Statistical Methodology Report

    Science.gov (United States)

    2016-03-17

    and sexual harassment in the U.S. military: Volume 2. Estimates for Department of Defense service members from the 2014 RAND military workplace ... Sexual harassment , gender discrimination, and sexual assault. The 2014 RMWS nonresponse adjustment involved two steps, each of which produced a...were necessary. Using completed 2015 cases, six outcome variables were modeled for females: sexual harassment , gender discrimination, sexual quid

  7. Medical abortion practices: a survey of National Abortion Federation members in the United States

    NARCIS (Netherlands)

    Wiegerinck, Melanie M. J.; Jones, Heidi E.; O'Connell, Katharine; Lichtenberg, E. Steve; Paul, Maureen; Westhoff, Carolyn L.

    2008-01-01

    Little is known about clinical implementation of medical abortion in the United States following approval of mifepristone as an abortifacient by the Food and Drug Administration (FDA) in 2000. We collected information regarding medical abortion practices of National Abortion Federation (NAF) members

  8. Faculty Members' Ethical Behaviors: "A Survey Based on Students' Perceptions at Universities in Turkey"

    Science.gov (United States)

    Ozcan, Kenan; Balyer, Aydin; Servi, Tayfun

    2013-01-01

    As members of academic team, faculty behaviors have vital influence on students' lives at universities. This study purposes to discover students' perceptions about faculty behaviors concerning their professional responsibilities, dating/sexual harassment, behaviors inside and behaviors outside the classroom and relationship based on self-interest.…

  9. AN INFRARED/X-RAY SURVEY FOR NEW MEMBERS OF THE TAURUS STAR-FORMING REGION

    International Nuclear Information System (INIS)

    Luhman, K. L.; Allen, P. R.; Mamajek, E. E.; Cruz, K. L.

    2009-01-01

    We present the results of a search for new members of the Taurus star-forming region using data from the Spitzer Space Telescope and the XMM-Newton Observatory. We have obtained optical and near-infrared spectra of 44 sources that exhibit red Spitzer colors that are indicative of stars with circumstellar disks and 51 candidate young stars that were identified by Scelsi and coworkers using XMM-Newton. We also performed spectroscopy on four possible companions to members of Taurus that were reported by Kraus and Hillenbrand. Through these spectra, we have demonstrated the youth and membership of 41 sources, 10 of which were independently confirmed as young stars by Scelsi and coworkers. Five of the new Taurus members are likely to be brown dwarfs based on their late spectral types (>M6). One of the brown dwarfs has a spectral type of L0, making it the first known L-type member of Taurus and the least massive known member of the region (M ∼ 4-7 M Jup ). Another brown dwarf exhibits a flat infrared spectral energy distribution, which indicates that it could be in the protostellar class I stage (star+disk+envelope). Upon inspection of archival images from various observatories, we find that one of the new young stars has a large edge-on disk (r = 2.''5 = 350 AU). The scattered light from this disk has undergone significant variability on a timescale of days in optical images from the Canada-France-Hawaii Telescope. Using the updated census of Taurus, we have measured the initial mass function for the fields observed by XMM-Newton. The resulting mass function is similar to previous ones that we have reported for Taurus, showing a surplus of stars at spectral types of K7-M1 (0.6-0.8 M sun ) relative to other nearby star-forming regions, such as IC 348, Chamaeleon I, and the Orion Nebula Cluster.

  10. Informed consent in Sri Lanka: A survey among ethics committee members

    OpenAIRE

    Sumathipala, Athula; Siribaddana, Sisira; Hewage, Suwin; Lekamwattage, Manura; Athukorale, Manjula; Siriwardhana, Chesmal; Murray, Joanna; Prince, Martin

    2008-01-01

    Abstract Background Approval of the research proposal by an ethical review committee from both sponsoring and host countries is a generally agreed requirement in externally sponsored research. However, capacity for ethics review is not universal. Aim of this study was to identify opinions and views of the members serving in ethical review and ethics committees in Sri Lanka on informed consent, essential components in the information leaflet and the consent form. Methods We obtained ethical ap...

  11. 2015 Workplace and Gender Relations Survey of Reserve Component Members: Tabulations of Responses

    Science.gov (United States)

    2016-03-17

    Members 46 DMDC 50. Experienced a gender -related behavior in line with gender discrimination (Q20-Q21). Q20. Said that [men] [ women ] were not as...54 DMDC 50. Gender Discrimination Prevalence Rate: by behavior (Q20-Q21 and Q49-Q50). Q20. Said that [men] [ women ] were not as good as [men...44  50.  Experienced a gender -related behavior in line with gender discrimination (Q20-Q21

  12. [Attitudes and experiences regarding physician assisted suicide : A survey among members of the German Association for Palliative Medicine].

    Science.gov (United States)

    Jansky, Maximiliane; Jaspers, Birgit; Radbruch, Lukas; Nauck, Friedemann

    2017-01-01

    The need to regulate physician-assisted suicide (PAS) and organizations offering assisted suicide has been controversially debated in Germany. Before the German parliament voted on various drafts in November 2015, the German Association for Palliative Medicine surveyed its members on their attitudes and experiences regarding PAS. Items for the survey were derived from the literature and consented in a focus group. 2005-2015 - PubMed: PAS [Title/Abstract] UND survey (all countries), grey literature. We invited 5152 members of the DGP to participate in the online/paper survey. Descriptive quantitative and content analytic qualitative analysis of data using SPSS and MaxQDA. We obtained 1811 valid data sets (response rate 36.9%). 33.7% of the participants were male, 43.6% were female, and 0.4% identifed as other. Physicians accounted for 48.5% of the respondents, 17.8% nurses, other professions 14.3%, and about 20% of the data was missing socio-demographic information. More than 90% agreed that "wishes for PAS may be ambivalent" and "are rather a wish to end an unbearable situation". Of the 833 participating physicians, 56% refused participating in PAS and 74.2% had been asked to perform PAS. PAS was actually performed by 3%. Of all participating members, 56% approved of a legal ban of organizations offering assisted suicide. More than 60% of all professions agreed that PAS is not a part of palliative care. The respondents show a broad spectrum of attitudes, only partly supporting statements of relevant bodies, such as DGP. Because many are confronted with the issue, PAS is relevant to professionals in palliative care.

  13. Exploring the attitudes of medical faculty members and students in Pakistan towards plagiarism: a cross sectional survey

    Science.gov (United States)

    Rathore, Farooq Azam; Zia, Ahmad Marjan; Mavrinac, Martina; Farooq, Fareeha

    2015-01-01

    Objective. The objective of this survey was to explore the attitudes towards plagiarism of faculty members and medical students in Pakistan. Methods. The Attitudes Toward Plagiarism questionnaire (ATP) was modified and distributed among 550 medical students and 130 faculty members in 7 medical colleges of Lahore and Rawalpindi. Data was entered in the SPSS v.20 and descriptive statistics were analyzed. The questionnaire was validated by principal axis factoring analysis. Results. Response rate was 93% and 73%, respectively. Principal axis factoring analysis confirmed one factor structure of ATP in the present sample. It had an acceptable Cronbach’s alpha value of 0.73. There were 421 medical students (218 (52%) female, 46% 3rd year MBBS students, mean age of 20.93 ± 1.4 years) and 95 faculty members (54.7% female, mean age 34.5 ± 8.9 years). One fifth of the students (19.7%) trained in medical writing (19.7%), research ethics (25.2%) or were currently involved in medical writing (17.6%). Most of the faculty members were demonstrators (66) or assistant professors (20) with work experience between 1 and 10 years. Most of them had trained in medical writing (68), research ethics (64) and were currently involved in medical writing (64). Medical students and faculty members had a mean score of 43.21 (7.1) and 48.4 (5.9) respectively on ATP. Most of the respondents did not consider that they worked in a plagiarism free environment and reported that self-plagiarism should not be punishable in the same way as plagiarism. Opinion regarding leniency in punishment of younger researchers who were just learning medical writing was divided. Conclusions. The general attitudes of Pakistani medical faculty members and medical students as assessed by ATP were positive. We propose training in medical writing and research ethics as part of the under and post graduate medical curriculum. PMID:26157615

  14. Clinical information seeking in traumatic brain injury: a survey of Veterans Health Administration polytrauma care team members.

    Science.gov (United States)

    Hogan, Timothy; Martinez, Rachael; Evans, Charlesnika; Saban, Karen; Proescher, Eric; Steiner, Monica; Smith, Bridget

    2018-03-01

    The polytraumatic nature of traumatic brain injury (TBI) makes diagnosis and treatment difficult. To (1) characterise information needs among Veterans Health Administration (VHA) polytrauma care team members engaged in the diagnosis and treatment of TBI; (2) identify sources used for TBI related information; and (3) identify barriers to accessing TBI related information. Cross-sectional online survey of 236 VHA polytrauma care team members. Most respondents (95.8%) keep at least somewhat current regarding TBI, but 31.5% need more knowledge on diagnosing TBI and 51.3% need more knowledge on treating TBI. Respondents use VHA affiliated sources for information, including local colleagues (81.7%), VHA offsite conferences/meetings (78.3%) and onsite VHA educational offerings (73.6%); however, limited time due to administrative responsibilities (50.9%), limited financial resources (50.4%) and patient care (50.4%) were prominent barriers. Medical librarians are in a unique position to develop information services, resources and other electronic tools that reflect the clinical context in which polytrauma care team members practice, and the different tasks they perform. Polytrauma care team members could benefit from additional information regarding the diagnosis and treatment of TBI. Addressing their information needs and supporting their information seeking requires a mulit-pronged approach to time and financial constraints. Published 2017. This article is a U.S. Government work and is in the public domain in the USA.

  15. 2013 Workplace and Equal Opportunity Survey of Active Duty Members: Administration, Datasets, and Codebook

    Science.gov (United States)

    2016-05-01

    found. 28 29 References Bastian, L. D., Lancaster, A. R., & Reyst, H. (1996). 1995 Sexual Harassment Survey (Report No. 96-014). Arlington...discrimination? b. Sexual harassment /discrimination? c. Religious harassment /discrimination? d. Other harassment /discrimination...1 2 3 b. Sexual harassment /discrimination? c. Religious harassment /discrimination? d. Other harassment /discrimination

  16. Summary of investigations of uranium deposits in the Pumpkin Buttes area, Johnson and Campbell Counties, Wyoming

    Science.gov (United States)

    Troyer, Max L.; McKay, Edward J.; Soister, Paul E.; Wallace, Stewart R.

    1954-01-01

    Uranium minerals were discovered in the Pumpkin Buttes area, Campbell and Johnson Counties, Wyo., by the U. S. Geological Survey in October 1951. From June to November 1952, an area of about 750 square miles was examined for uranium deposits, and 211 localities having abnormally high radioactivity were found; uranium minerals are visible at 121 of these localities. All known uranium mineralization in the area is restricted to sandstones of the Wasatch formation, except sparsely disseminated uranium in the sandstone of the White River formation, which caps the Pumpkin Buttes, mid several localities on the Great Pine Ridge southwest of the Pumpkin Buttes where iron-saturated sandstone and clinker in the Fort Union formation have above-normal radioactivity. The uranium occurrences in the Wasatch formation are in a red sandstone zone 450 to 900 feet above the base of the formation and are of two types: small concretionary masses of uranium, iron, manganese and vanadium minerals in sandstone, and irregular zones in which uranium minerals are disseminated in sandstone. The second type is usually larger but of lower grade than the first. Most of the localities at which uranium occurs are in a north-trending belt about 60 miles long and 18 miles in maximum width.

  17. Analyzed upon a survey on Members of the German Bundestag of the 16th legislative period

    OpenAIRE

    Schmidt, Sabine

    2015-01-01

    The profession of being a Member of Parliament seems to be exemplary for a “natural asymmetry” of gender. The findings of research studies conducted within the framework of this dissertation indicate that male MP’s have more children than the national average and the “image” of being a family-father is rather advantageous, while female MP’s have less children compared to the German population and being a mother generally poses a disadvantage for women and their chances of having a political c...

  18. Sutter Buttes-the lone volcano in California's Great Valley

    Science.gov (United States)

    Hausback, Brain P.; Muffler, L.J. Patrick; Clynne, Michael A.

    2011-01-01

    The volcanic spires of the Sutter Buttes tower 2,000 feet above the farms and fields of California's Great Valley, just 50 miles north-northwest of Sacramento and 11 miles northwest of Yuba City. The only volcano within the valley, the Buttes consist of a central core of volcanic domes surrounded by a large apron of fragmental volcanic debris. Eruptions at the Sutter Buttes occurred in early Pleistocene time, 1.6 to 1.4 million years ago. The Sutter Buttes are not part of the Cascade Range of volcanoes to the north, but instead are related to the volcanoes in the Coast Ranges to the west in the vicinity of Clear Lake, Napa Valley, and Sonoma Valley.

  19. Is a management degree worth the investment for physicians? A survey of members of the American College of Physician Executives.

    Science.gov (United States)

    Weeks, William B; Lazarus, Arthur; Wallace, Amy E

    2008-01-01

    In a survey of 568 physician members of the American College of Physician Executives (ACPE), most of whom had advanced management degrees (MBA, MMM, MPH), approximately 90% of respondents reported that their investment in the education was "worth it." The return on investment was independent of the quality of the academic institution, although primary care physicians stood to gain more relative to specialists. Salary comparisons showed that female physicians had approximately 20% lower incomes than male physicians, confirming the presence of a "glass ceiling" for female physician executives as seen in other medical specialties. These findings have implications for early and mid-career physicians and physician recruiters.

  20. Informed consent in Sri Lanka: a survey among ethics committee members.

    Science.gov (United States)

    Sumathipala, Athula; Siribaddana, Sisira; Hewage, Suwin; Lekamwattage, Manura; Athukorale, Manjula; Siriwardhana, Chesmal; Murray, Joanna; Prince, Martin

    2008-05-20

    Approval of the research proposal by an ethical review committee from both sponsoring and host countries is a generally agreed requirement in externally sponsored research.However, capacity for ethics review is not universal. Aim of this study was to identify opinions and views of the members serving in ethical review and ethics committees in Sri Lanka on informed consent, essential components in the information leaflet and the consent form. We obtained ethical approval from UK and Sri Lanka. A series of consensus generation meetings on the protocol were conducted. A task oriented interview guide was developed. The interview was based on open-ended questionnaire. Then the participants were given a WHO checklist on informed consent and requested to rate the items on a three point scale ranging from extremely important to not important. Twenty-nine members from ethics committees participated. Majority of participants (23), believed a copy of the information leaflet and consent form, should accompany research proposal. Opinions about the items that should be included in the information leaflets varied. Participants identified 18 criteria as requirements in the information leaflet and 19 for the consent form. The majority, 20 (69%), believed that all research need ethical approval but identified limited human resource, time and inadequate capacity as constraints. Fifteen (52%) believed that written consent is not required for all research. Verbal consent emerged as an alternative to written consent. The majority of participants rated all components of the WHO checklist as important. The number of themes generated for the consent form (N = 18) is as many as for the information leaflet (N = 19) and had several overlaps. This suggests that the consent form should be itemized to reflect the contents covered in the information leaflet. The participants' opinion on components of the information leaflets and consent forms proved to be similar with WHO checklist on informed

  1. Informed consent in Sri Lanka: A survey among ethics committee members

    Directory of Open Access Journals (Sweden)

    Siriwardhana Chesmal

    2008-05-01

    Full Text Available Abstract Background Approval of the research proposal by an ethical review committee from both sponsoring and host countries is a generally agreed requirement in externally sponsored research. However, capacity for ethics review is not universal. Aim of this study was to identify opinions and views of the members serving in ethical review and ethics committees in Sri Lanka on informed consent, essential components in the information leaflet and the consent form. Methods We obtained ethical approval from UK and Sri Lanka. A series of consensus generation meetings on the protocol were conducted. A task oriented interview guide was developed. The interview was based on open-ended questionnaire. Then the participants were given a WHO checklist on informed consent and requested to rate the items on a three point scale ranging from extremely important to not important. Results Twenty-nine members from ethics committees participated. Majority of participants (23, believed a copy of the information leaflet and consent form, should accompany research proposal. Opinions about the items that should be included in the information leaflets varied. Participants identified 18 criteria as requirements in the information leaflet and 19 for the consent form. The majority, 20 (69%, believed that all research need ethical approval but identified limited human resource, time and inadequate capacity as constraints. Fifteen (52% believed that written consent is not required for all research. Verbal consent emerged as an alternative to written consent. The majority of participants rated all components of the WHO checklist as important. Conclusion The number of themes generated for the consent form (N = 18 is as many as for the information leaflet (N = 19 and had several overlaps. This suggests that the consent form should be itemized to reflect the contents covered in the information leaflet. The participants' opinion on components of the information leaflets and

  2. Survey: technique of performing intravitreal injection among members of the Brazilian Retina and Vitreous Society (SBRV

    Directory of Open Access Journals (Sweden)

    Helio F. Shiroma

    2015-02-01

    Full Text Available Purpose: To evaluate and describe the precautions involved in the technique of intravitreal injection of antiangiogenic drugs adopted by the ophthalmologists who are members of the Brazilian Society of Retina and Vitreous (SBRV. Methods: A questionnaire containing 22 questions related to precautions taken before, during, and after intravitreal injection was sent electronically to 920 members of SBRV between November 15, 2013 and April 31, 2014. Results: 352 responses (38% were obtained. There was a predominance of men (76% from the southwest region of Brazil (51%. The professional experience varied between 6 and 15 years after medical specialization (50%. Most professionals (76% performed an average of 1 to 10 intravitreal injections a week, and 88% of the procedures were performed in the operating room using povidone iodine (99%, sterile gloves, and blepharostat (94%. For inducing topical anesthesia, usage of anesthetic eye drops was the most used technique (65%. Ranibizumab (Lucentis® was the most common drug (55%, and age-related macular degeneration (AMD was the most treated disease (57%. Regarding the complications treated, 6% of the ophthalmologists had treated at least one case of retinal detachment, 20% had treated cases of endophthalmitis, 9% had treated cases of vitreous hemorrhage, and 12% had encountered cases of crystalline lens touch. Conclusion: Intravitreal injection is a procedure routinely performed by retina specialists and has a low incidence of complications. Performing the procedure in the operating room using an aseptic technique was preferred by most of the respondents. Ranibizumab was the most used drug, and AMD was the most treated disease.

  3. Mining and comparative survey of EST-SSR markers among members of Euphorbiaceae family.

    Science.gov (United States)

    Sen, Surojit; Dehury, Budheswar; Sahu, Jagajjit; Rathi, Sunayana; Yadav, Raj Narain Singh

    2018-04-06

    Euphorbiaceae represents flowering plants family of tropical and sub-tropical region rich in secondary metabolites of economic importance. To understand and assess the genetic makeup among the members, this study was undertaken to characterize and compare SSR markers from publicly available ESTs and GSSs of nine selected species of the family. Mining of SSRs was performed by MISA, primer designing by Primer3, while functional annotation, gene ontology (GO) and enrichment analysis were performed by Blast2GO. A total 12,878 number of SSRs were detected from 101,701 number of EST sequences. SSR density ranged from 1 SSR/3.22 kb to 1 SSR/15.65 kb. A total of 1873 primer pairs were designed for the annotated SSR-Contigs. About 77.07% SSR-ESTs could be assigned a significant match to the protein database. 3037 unique SSR-FDM were assigned and IPR003657 (WRKY Domain) was found to be the most dominant FDM among the members. 1810 unique GO terms obtained were further subjected to enrichment analysis to obtain 513 statistically significant GO terms mapped to the SSR containing ESTs. Most frequent enriched GO terms were, GO:0003824 for molecular function, GO:0006350 for biological process and GO:0005886 for cellular component, justifying the richness of defensive secondary metabolites and phytomedicine within the family. The results from this study provides tangible insight to genetic make-up and distribution of SSRs. Functional annotation corresponded many genes of unknown functions which may be considered as novel genes or genes responsible for stress specific secondary metabolites. Further studies are required to understand stress specific genes accountable for leveraging the synthesis of secondary metabolites.

  4. Creep failure analysis of butt welded tubes

    International Nuclear Information System (INIS)

    Browne, R.J.; Parker, J.D.; Walters, D.J.

    1981-01-01

    As part of a major research programme to investigate the influence of butt welds on the life expectancy of tubular components, a series of internal-pressure, stress-rupture tests have been carried out. Thick walled 1/2Cr 1/2Mo 1/4V tube specimens were welded with mild steel, 1Cr 1/2Mo steel, 2 1/4Cr 1Mo steel or nominally matching 1/2Cr 1/2Mo 1/4V steel to give a wide range of weld metal creep strengths relative to the parent tube. The weldments were tested at 565 0 C at two values of internal pressure, and gave failure lives of up to 44,000 hrs. Finite element techniques have been used to determine the stationary state stress distribution in the weldment which was represented by a three material model. Significant stress redistribution was indicated and these results enabled the position and orientation of cracking and the rupture life to be predicted. The theoretical and experimental results have been used to highlight the limitations of current design methods which are based on the application of the mean diameter hoop stress to the parent material stress rupture data. (author)

  5. Deceased Donor Intervention Research: A Survey of Transplant Surgeons, Organ Procurement Professionals, and Institutional Review Board Members.

    Science.gov (United States)

    Rodrigue, J R; Feng, S; Johansson, A C; Glazier, A K; Abt, P L

    2016-01-01

    Innovative deceased donor intervention strategies have the potential to increase the number and quality of transplantable organs. Yet there is confusion over regulatory and legal requirements, as well as ethical considerations. We surveyed transplant surgeons (n = 294), organ procurement organization (OPO) professionals (n = 83), and institutional review board (IRB) members (n = 317) and found wide variations in their perceptions about research classification, risk assessment for donors and organ transplant recipients, regulatory oversight requirements, and informed consent in the context of deceased donor intervention research. For instance, when presented with different research scenarios, IRB members were more likely than transplant surgeons and OPO professionals to feel that study review and oversight were necessary by the IRBs at the investigator, donor, and transplant center hospitals. Survey findings underscore the need to clarify ethical, legal, and regulatory requirements and their application to deceased donor intervention research to accelerate the pace of scientific discovery and facilitate more transplants. © Copyright 2015 The American Society of Transplantation and the American Society of Transplant Surgeons.

  6. A Radiation Badge Survey for Family Members Living With Patients Treated With a 103Pd Permanent Breast Seed Implant

    International Nuclear Information System (INIS)

    Keller, Brian M.; Pignol, Jean-Philippe; Rakovitch, Eileen; Sankreacha, Raxa; O'Brien, Peter

    2008-01-01

    Purpose: Sixty-seven patients with early-stage breast cancer were treated in a Phase I/II clinical trial using a 103 Pd permanent breast seed implant as adjuvant radiotherapy after breast-conserving surgery. We report the dose received by family members living with these patients and compare measured doses with theoretical worst-case scenario estimates. Methods and Materials: Exposure-rate measurements were taken at 1 m from the patient by using a calibrated low-energy survey meter. Landauer (Landauer Inc., Glenwood, IL) Luxel badges, with sensitivity of 0.01 mSv, were given to family members to wear after the implantation. Badge readings for 33 spouses and 28 other family members were used to estimate effective doses, and these were compared with theory. Results: Average preimplantation planning target volume from computed tomography was 50.3 ml (range, 18.0-96.7 ml), and average preimplantation distance between the skin and the most anterior planning target volume margin was 0.57 cm. The average maximum exposure rate was measured to be 2.4 ± 1.1 mR/h, and average measured dose to a spouse was 0.99 ± 1.0 mSv. The calculated exposure rates and spousal doses using preimplantation computed tomography scan data overestimated those measured. Average measured family member dose (excluding spouses) was 0.20 ± 0.58 mSv. Conclusions: Based on measured and calculated spousal doses, a permanent breast seed implant using 103 Pd is safe for the public. However, it is recommended that extra precautions in the way of a breast patch be used when patients with an implant will be in the vicinity of toddlers or pregnant women

  7. [Bipolar obsessive-compulsive disorder: confirmation of results of the "ABC-OCD" survey in 2 populations of patient members versus non-members of an association].

    Science.gov (United States)

    Hantouche, E G; Kochman, F; Demonfaucon, C; Barrot, I; Millet, B; Lancrenon, S; Akiskal, H S

    2002-01-01

    -II disorder (DSM IV criteria) was present in 11% of FA-OCD and 16% of PSY-OCD. Furthermore using the Hypomania Checklist showed that BP-II disorder rate (score > or = 10) was higher: 32% of in both populations. Cyclothymic rate was also globally higher, but significant difference was obtained: 56% of FA-OCD versus 45% of PSY-OCD (p = 0.02). Moreover, mood switching rate under anti-OCD drugs was equivalent in both OCD populations (respectively 38% and 33%, p = ns). In case of BP comorbidity, patients had presented a greater number of concurrent major depressive episodes and suicidal attempts. When concurrent depression was considered, the rate diagnosis of soft bipolarity was 2.5 fold, and the number of suicidal attempts augmented by 7 fold (by comparison versus non-depressed OCD). Despite very early descriptions (since the beginning of the last century) of particular relationships between so-called "psychasthenia, folie de doute, folie raisonnante" and "circular and intermittent madness or cyclothymia", a few attention has been devoted to this complex pattern of comorbidity. The comparative data deriving from the collaborative survey with patients who are members of AFTOC and with a cohort of psychiatric outpatients, confirm the reality of bipolar-OCD comorbidity, which is largely under-recognized in clinical practice. More in depth analyses are now undertaken in order to investigate the characteristics of "bipolar OCD" by comparison to "non bipolar OCD".

  8. Demographics and Professional Practices of School Psychologists: A Comparison of NASP Members and Non-NASP School Psychologists by Telephone Survey

    Science.gov (United States)

    Lewis, Michael F.; Truscott, Stephen D.; Volker, Martin A.

    2008-01-01

    A national telephone survey was conducted to examine potential differences between National Association of School Psychologists (NASP) members and non-NASP member school psychologists. Identified schools were contacted by telephone and the researchers asked to speak with the school psychologist. A sample of 124 practicing school psychologists was…

  9. Prophylactic antibiotic use in pediatric patients undergoing urinary tract catheterization: a survey of members of the Society for Pediatric Urology.

    Science.gov (United States)

    Glaser, Alexander P; Rosoklija, Ilina; Johnson, Emilie K; Yerkes, Elizabeth B

    2017-09-06

    Current organizational guidelines regarding use of antibiotics during urinary tract catheterization are based on limited evidence and are not directly applicable to the pediatric urology population. We seek to improve understanding of this population by first evaluating current practices. This study aims to investigate practice patterns and attitudes of pediatric urologists regarding the use of antibiotics in the setting of urinary tract catheterization. An online survey was sent to members of the Society for Pediatric Urology. Questionnaire sections included demographics, general questions about antibiotic use with catheterization, and specific clinical scenarios. Descriptive statistics were used, and chi-square analysis was performed to examine associations between demographics and specific responses. Of 448 pediatric urologists surveyed, 154 (34%) responded to the survey. A majority of surveyed urologists (78%) prescribe daily prophylactic antibiotics with a hypospadias stent in place, but extensive variation in use of antibiotics was reported with other catheters and tubes. Extensive variation in practice patterns was also reported for three case scenarios regarding antibiotic prophylaxis with catheterization. Urologists > 50 years of age and fellowship-trained urologists were more likely to prescribe antibiotics for hypospadias stents (p = 0.02, p = 0.03), but no other significant associations between demographic characteristics and antibiotic use were found. There is substantial variation in practice patterns among surveyed pediatric urologists regarding prophylactic antibiotic use with urinary catheterization. This variation, combined with a lack of objective data and increasing pressure to decrease infectious complications and combat antibiotic resistance, highlights the need for development of management guidelines for this unique population.

  10. Geographic patterns of cigarette butt waste in the urban environment.

    Science.gov (United States)

    Marah, Maacah; Novotny, Thomas E

    2011-05-01

    This reports the initial phase of a study to quantify the spatial pattern of cigarette butt waste in an urban environment. Geographic Information Systems (GIS) was used to create a weighted overlay analysis model which was then applied to the locations of businesses where cigarettes are sold or are likely to be consumed and venues where higher concentrations of butts may be deposited. The model's utility was tested using a small-scale litter audit in three zip codes of San Diego, California. We found that cigarette butt waste is highly concentrated around businesses where cigarettes are sold or consumed. The mean number of butts for predicted high waste sites was 38.1 (SD 18.87), for predicted low waste sites mean 4.8 (SD 5.9), psales and consumption. A GIS and weighted overlay model may be a useful tool in predicting urban locations of greater and lesser amounts of cigarette butt waste. These data can in turn be used to develop economic cost studies and plan mitigation strategies in urban communities.

  11. Bali Cattle Carcass Characteristic of Different Butt Shape Condition

    Science.gov (United States)

    Hafid, H.; Nuraini; Inderawati; Kurniawan, W.

    2018-02-01

    Carcass was main product on cattle slaughtering which contain beef for human consumption and it has high nutritional and economical value. Carcass production on cattle has been influenced by several factors, such as cattle breed, feed, and body conformation. Cattle Butt Shape was one of part cattle body conformation which allegedly has have positive correlation on produced carcass. This research was aimed to evaluate Butt Shape condition influenced on Bali cattle carcass characteristic. The research was using Bali cattle which slaughter in Kendari Slaughtering House (Rumah Potong Hewan/RPH - Kendari). The observation includes weighing, and measuring parts of carcass was conducted on 60 heads of Halal process slaughtered Bali cattle which traditionally maintained. The research parameters were carcass productivity parameters i.e: slaughtering weight, carcass weight and length, leg length and circumstances. Obtained data were analyzed using Complete Randomized Design and post hoc analyzed using Least Significant Different if have any influence. The research result showed that cattle Butt Shape condition have significant (pBali cattle carcass productivity parameters. Butt shape with B category was result the best carcass productivity compare the others, while C category was better than D. It can be concluded that body and carcass weight were linearly influenced by cattle butt shape.

  12. Human resources issues and Australian Disaster Medical Assistance Teams: results of a national survey of team members.

    Science.gov (United States)

    Aitken, Peter; Leggat, Peter; Harley, Hazel; Speare, Richard; Leclercq, Muriel

    2012-01-01

    Calls for disaster medical assistance teams (DMATs) are likely to continue in response to international disasters. As part of a national survey, this study was designed to evaluate Australian DMAT experience in relation to the human resources issues associated with deployment. Data was collected via an anonymous mailed survey distributed via State and Territory representatives on the Australian Health Protection Committee, who identified team members associated with Australian DMAT deployments from the 2004 South East Asian Tsunami disaster. The response rate for this survey was 50% (59/118). Most personnel had deployed to the Asian Tsunami affected areas with DMAT members having significant clinical and international experience. While all except one respondent stated they received a full orientation prior to deployment, only 34% of respondents (20/59) felt their role was clearly defined pre deployment. Approximately 56% (33/59) felt their actual role matched their intended role and that their clinical background was well suited to their tasks. Most respondents were prepared to be available for deployment for 1 month (34%, 20/59). The most common period of notice needed to deploy was 6-12 hours for 29% (17/59) followed by 12-24 hours for 24% (14/59). The preferred period of overseas deployment was 14-21 days (46%, 27/59) followed by 1 month (25%, 15/59) and the optimum shift period was felt to be 12 hours by 66% (39/59). The majority felt that there was both adequate pay (71%, 42/59) and adequate indemnity (66%, 39/59). Almost half (49%, 29/59) stated it was better to work with people from the same hospital and, while most felt their deployment could be easily covered by staff from their workplace (56%, 33/59) and caused an inconvenience to their colleagues (51%, 30/59), it was less likely to interrupt service delivery in their workplace (10%, 6/59) or cause an inconvenience to patients (9%, 5/59). Deployment was felt to benefit the affected community by nearly all

  13. Antibiotic Use in 2016 by Members of the American Association of Endodontists: Report of a National Survey.

    Science.gov (United States)

    Germack, Mark; Sedgley, Christine M; Sabbah, Wael; Whitten, Brian

    2017-10-01

    This study surveyed the antibiotic prescribing practices of endodontists, and data were compared with previous surveys conducted in 1994 and 1999. A 17-question survey was sent via www.surveymonkey.com to 3000 active members of the American Association of Endodontists for responses about antibiotic prescribing practices and demographics. The data were analyzed using descriptive statistics, chi-square tests, and linear regression analyses. Six hundred eighty-six participants (22.86%) completed the survey. The most frequently prescribed antibiotics were amoxicillin (60.71%) followed by penicillin V (30.43%) and clindamycin for patients with allergies (95.4%). Respondents reported prescribing antibiotics for irreversible pulpitis with mild symptoms (1.75%), irreversible pulpitis with moderate symptoms (6.41%), necrotic pulp with symptomatic apical periodontitis (43.59%), chronic apical abscess without (10.50%) or with symptoms (29.74%), acute apical abscess (95.92%), avulsion (70.26%), endodontic surgery (41.69%), retreatment (silver point [23.76%] or gutta-percha [15.60%]), postoperative pain after instrumentation or obturation (12.39%), and perforation repair (5.98%). The type of practice (solo/group) and geographic region (Southeast) were significant predictors of increased antibiotic prescribing; 36.89% of respondents reported prescribing antibiotics that are not necessary, most commonly because of patient expectations. Since 1999, there has been a significant shift from prescribing penicillin V to amoxicillin as endodontists' first choice of antibiotic and a significant increase in the use of clindamycin for penicillin-allergic patients. Antibiotics continue to be prescribed in clinical situations for which they are typically not indicated, most commonly because of patient expectations. Regional differences in antibiotic prescribing practices by endodontists exist in the United States. Copyright © 2017 American Association of Endodontists. Published by Elsevier

  14. Are we preparing the next generation of fisheries professionals to succeed in their careers?: A survey of AFS members

    Science.gov (United States)

    McMullin, Steve L.; DiCenzo, Vic; Essig, Ron; Bonds, Craig; DeBruyne, Robin L.; Kaemingk, Mark A.; Mather, Martha E.; Myrick, Christopher A.; Phelps, Quinton E.; Sutton, Trent M.; Triplett, James

    2016-01-01

    Natural resource professionals have frequently criticized universities for poorly preparing graduates to succeed in their jobs. We surveyed members of the American Fisheries Society to determine which job skills and knowledge of academic topics employers, students, and university faculty members deemed most important to early-career success of fisheries professionals. Respondents also rated proficiency of recently hired, entry-level professionals (employers) on how well their programs prepared them for career success (students and faculty) in those same job skills and academic topics. Critical thinking and written and oral communication skills topped the list of important skills and academic topics. Employers perceived recent entry-level hires to be less well-prepared to succeed in their careers than either university faculty or students. Entry-level hires with post-graduate degrees rated higher in proficiency for highly important skills and knowledge than those with bachelor's degrees. We conclude that although universities have the primary responsibility for developing critical thinking and basic communication skills of students, employers have equal or greater responsibility for enhancing skills of employees in teamwork, field techniques, and communicating with stakeholders. The American Fisheries Society can significantly contribute to the preparation of young fisheries professionals by providing opportunities for continuing education and networking with peers at professional conferences.

  15. [Results of an internet-based survey amongst members of the German Ophthalmological Society concerning postmortem cornea donation].

    Science.gov (United States)

    Uhlig, C E; Promesberger, J; Hirschfeld, G; Koch, R; Reinhard, T; Seitz, B

    2012-12-01

    Analysis of willingness for postmortem cornea donation by professionals in ophthalmology and their motives in favor of or against donation. 3887 members of the German Ophthalmological Society received an anonymous questionnaire concerning sociodemographic background, physical health, experiences with organ explantation and their former engagement and motives concerning organ and cornea donation. 722 of the questionnaires were partially and 533 completely answered with an average willingness for cornea donation of 79.4%. Significant parameters for cornea donation were gender, former experience with organ explantation, ophthalmological health and fear of false diagnosis of brain death, worse medical treatment or organ commercialization. Of the participants 53.9% suggested the internet as a favorite source of information in this matter. The factors which had a significant impact on cornea donation in this survey seem to be mainly a result of insufficient information. Detailed information regarding this topic should preferentially be presented on internet pages of professional societies and could probably increase donation approval of DOG members.

  16. [Management of childhood idiopathic thrombocytopenic purpura: a survey of members of the French Society of Pediatric Hematology and Immunology (SHIP)].

    Science.gov (United States)

    Lutz, P; Villega, F; Ducassou, S; Entz-Werle, N; Michel, G

    2007-05-01

    The purpose of this study was to report in acute childhood idiopathic thrombocytopenic purpura (ITP) the current practices of French paediatric hematologists and to compare them to recent publications of American and British teams. A questionnaire was sent online to the members of the French Society of Pediatric Hematology/Immunology (SHIP). This questionnaire, adapted from a similar american study conducted in 2001, asked 16 questions based on the clinical presentation of a 5-year-old boy referred for an acute ITP. 59/123 SHIP members responded to the survey. In response to question regarding initial treatment, 86% of physicians would be given active treatments and only 9% would rarely or never administer any drug. When asked which agent would be used in case of treatment, 68% would choose to prescribe intravenous immunoglobulins and 32% corticosteroids, nobody recommended the use of anti-D immunoglobulins. Furthermore, 83% would usually hospitalize such a child. Finally, this study allowed us to update the current French management of treating pediatric ITP which is almost comparable among this subset of pediatric hematologists, but showed some discrepancies comparatively to the American and British studies.

  17. 78 FR 21582 - Revisions to the California State Implementation Plan, Butte County Air Quality Management...

    Science.gov (United States)

    2013-04-11

    ... the California State Implementation Plan, Butte County Air Quality Management District and Sacramento Metropolitan Air Quality Management District AGENCY: Environmental Protection Agency (EPA). ACTION: Proposed rule. SUMMARY: EPA is proposing to approve revisions to the Butte County Air Quality Management...

  18. Importance of Group Therapeutic Support for Family Members of Children with Alopecia Areata: A Cross-Sectional Survey Study.

    Science.gov (United States)

    Aschenbeck, Kelly A; McFarland, Sarah L; Hordinsky, Maria K; Lindgren, Bruce R; Farah, Ronda S

    2017-07-01

    The psychological effect of alopecia areata (AA) is well documented, but group interaction may help lessen this burden. We aimed to determine factors that draw patients with AA and their families to group events. Surveys were administered at the annual alopecia areata bowling social in 2015 and 2016. This event is a unique opportunity for children with AA and their families to meet others with the disease and connect with local support group resources from the Minnesota branch of the National Alopecia Areata Foundation. Data from 2015 and 2016 were combined. Comparisons of subgroups were performed using Fisher exact tests for response frequencies and percentages and two-sample t tests for mean values. An equal number of men and women participated in the study (n = 13 each). The average age was 41.1 years. There were no significant differences (p > 0.05) in survey responses based on respondent age or sex. Twenty-three (88.5%) attendees sought to connect with others with AA and met three or more people during the event. Seventeen (65.4%) also attended other support group events. Twelve respondents (46.2%) came to support a friend or family member. One hundred percent of attendees identified socializing with others with AA as important. Group interaction is an important source of therapeutic support for people with AA and their families. © 2017 Wiley Periodicals, Inc.

  19. Equipment for Preparing Pipeline Position Butts for Welding

    Directory of Open Access Journals (Sweden)

    Lobanov L.M.

    2015-09-01

    Full Text Available The results of developments of the Ye.O.Paton Electric Welding Institute and its specialized departments on the designing national equipment models for preparation during the assembly the edges and butt ends of pipeline position butts with the diameter from 14 up to 159 mm, repair and modernization of power engineering objects, including the power units of nuclear and heat electric stations, in chemical and machine building, at enterprises of oil-gas complex and other branches of industry are presented.

  20. 75 FR 53714 - Stainless Steel Butt-Weld Pipe Fittings From Japan, Korea, and Taiwan

    Science.gov (United States)

    2010-09-01

    ...)] Stainless Steel Butt-Weld Pipe Fittings From Japan, Korea, and Taiwan AGENCY: United States International... stainless steel butt-weld pipe fittings from Japan, Korea, and Taiwan. SUMMARY: The Commission hereby gives... butt-weld pipe fittings from Japan, Korea, and Taiwan would be likely to lead to continuation or...

  1. Exposure to secondhand smoke at work: a survey of members of the Australian Liquor, Hospitality and Miscellaneous Workers Union.

    Science.gov (United States)

    Cameron, Melissa; Wakefield, Melanie; Trotter, Lisa; Inglis, Graeme

    2003-10-01

    To measure workers' attitudes towards and experiences of exposure to secondhand smoke (SHS) in the workplace. A stratified random sample of members from the Victorian Branch of the Australian Liquor, Hospitality and Miscellaneous Workers Union (LHMU) was interviewed by telephone in September 2001. Of the 1,078 respondents surveyed (77% response rate), hospitality workers comprised 49% of the sample, while the remainder comprised community services, property services and manufacturing workers. Overall, 54% of union members were employed in workplaces that did not completely ban smoking and 34% reported being exposed to SHS during their typical working day. Workplaces with total smoking bans had a high level of compliance with these restrictions, with no workers in these settings indicating exposure to SHS at work. Compared with other workers, hospitality workers reported working in environments that had more permissive smoking policies. Consistent with this, 56% of hospitality workers said they were exposed to SHS during a typical day at work compared with 11% of other workers. Overall, 79% of workers expressed concern about exposure to SHS, including 66% of smokers. Compared with other workers, hospitality workers reported a higher level of concern about exposure to SHS at work. These findings provide evidence that many workers, and especially those employed in the hospitality sector, are exposed to SHS during their working day and are concerned about the effects of such exposure on their health. These findings indicate that workplace smoke-free policies are effective in reducing worker exposure to SHS and demonstrate support for the extension of smoke-free policies to hospitality workplaces.

  2. Investigation and control of factors influencing resistance upset butt welding.

    NARCIS (Netherlands)

    Kerstens, N.F.H.

    2010-01-01

    The purpose of this work is to investigate the factors influencing the resistance upset butt welding process to obtain an understanding of the metal behaviour and welding process characteristics, so that new automotive steels can be welded with reduced development time and fewer failures in

  3. Butt-welding technology for double walled Polyethylene pipe

    International Nuclear Information System (INIS)

    Lee, Bo-Young; Kim, Jae-Seong; Lee, Sang-Yul; Kim, Yeong K.

    2012-01-01

    Highlights: ► We developed a butt welding apparatus for doubled walled Polyethylene pipe. ► We design the welding process by analyzing thermal behaviors of the material. ► We performed the welding and tested the welded structural performances. ► We also applied the same technology to PVC pipes. ► We verified the butt welding was successful and effective for the pipes with irregular sections. -- Abstract: In this study, mechanical analyses of a butt welding technology for joining Polyethylene pipe are presented. The pipe had unique structure with double wall, and its section topology was not flat. For an effective repair of leakage and replacements of the pipe, the butt welding technology was developed and tested. For the material characterizations, thermodynamic analyses such as thermal gravimetric analysis and differential scanning calorimetry were performed. Based on the test results, the process temperature and time were determined to ensure safe joining of the pipes using a hot plate apparatus. The welding process was carefully monitored by measuring the temperature. Then, the joined pipes were tested by various methods to evaluate the quality. The analyses results showed the detail process mechanism during the joining process, and the test results demonstrated the successful application of the technology to the sewage pipe repairs.

  4. Application Regarding the Butt-Welding Through Intermediate Melting

    Directory of Open Access Journals (Sweden)

    Tudorel Ene

    2006-10-01

    Full Text Available It consists in presenting butt welding procedure through intermediate melting and its usage for manufacturing cutting tools type drill, tap screw, reamer by welding the active part (made of high-speed steel to the tool tail (made of unalloyed steel wit low carbon.

  5. ANSYS Simulation of Residual Strains in Butt-welded Joints

    Directory of Open Access Journals (Sweden)

    A. Atroshenko

    2014-07-01

    Full Text Available The effect of thermal-strain cycle on residual strains in thin-walled circular seams of cylindrical shells using TIG butt welds was studied. Estimates were calculated using numerical modelling. The structure was made of corrosion-resistant austenitic steels.

  6. Effect of unaffordable medical need on distress level of family member: analyses of 1997?2013 United States National Health Interview Surveys

    OpenAIRE

    Chih, Hui Jun; Liang, Wenbin

    2017-01-01

    Background Reduced funding to public health care systems during economic downturns is a common phenomenon around the world. The effect of health care cost on family members of the patients has not been established. This paper aims to explore the relationship between affordability of health care and vulnerability of family members to distress levels. Methods Data of a total of 262,843 participants were obtained from 17 waves (1997?2013) of the United States National Health Interview Survey. Mu...

  7. On-Call Communication in Orthopaedic Trauma: "A Picture Is Worth a Thousand Words"--A Survey of OTA Members.

    Science.gov (United States)

    Molina, Cesar S; Callan, Alexandra K; Burgos, Eduardo J; Mir, Hassan R

    2015-05-01

    To quantify the effects of varying clinical communication styles (verbal and pictorial) on the ability of orthopaedic trauma surgeons in understanding an injury and formulate an initial management plan. A Research Electronic Data Capture survey was e-mailed to all OTA members. Respondents quantified (5-point Likert scale) how confident they felt understanding an injury and establishing an initial management plan based on the information provided for 5 common orthopaedic trauma scenarios. Three verbal descriptions were created for each scenario and categorized as limited, moderate, or detailed. The questions were repeated with the addition of a radiographic image and then repeated a third time including a clinical photograph. Statistical evaluation consisted of descriptive statistics and Kruskal-Wallis analyses using STATA (version 12.0). Of the 221 respondents, there were a total of 95 who completed the entire survey. Nearly all were currently taking call (92/95 = 96.8%) and the majority were fellowship trained (79/95 = 83.2%). Most practice at a level I trauma center (58/95 = 61.1%) and work with orthopaedic residents (62/95 = 65.3%). There was a significant increase in confidence scores between a limited, moderate, and detailed description in all clinical scenarios for understanding the injury and establishing an initial management plan (P 0.05). The addition of images in the form of radiographs and/or clinical photographs greatly improves the confidence of orthopaedic trauma surgeons in understanding injuries and establishing initial management plans with limited verbal information (P communicating providers.

  8. Electronic cigarettes: a survey of perceived patient use and attitudes among members of the British thoracic oncology group.

    Science.gov (United States)

    Sherratt, Frances C; Newson, Lisa; Field, John K

    2016-05-17

    Smoking cessation following lung cancer diagnosis has been found to improve several patient outcomes. Electronic cigarette (e-cigarette) use is now prevalent within Great Britain, however, use and practice among patients with lung cancer has not as yet been explored. The current study aims to explore e-cigarette use among patients and examine current practice among clinicians. The results have important implications for future policy and practice. Members of The British Thoracic Oncology Group (BTOG) were contacted via several e-circulations (N = 2,009), requesting them to complete an online survey. Of these, 7.7 % (N = 154) completed the survey, which explored participant demographics and smoking history, perceptions of patient e-cigarette use, practitioner knowledge regarding sources of guidance pertaining to e-cigarettes, and practitioner advice. Practitioners frequently observed e-cigarette use among patients with lung cancer. The majority of practitioners (81.4 %) reported responding to patient queries pertaining to e-cigarettes within the past year; however, far fewer (21.0 %) felt confident providing patients with e-cigarette advice. Practitioner confidence was found to differentiate by gender (p = 0.012) and employment speciality (p = 0.030), with nurses reporting particularly low levels of confidence in advising. The results also demonstrate extensive variability regarding the practitioner advice content. The results demonstrate that patients refer to practitioners as a source of e-cigarette guidance, yet few practitioners feel confident advising. The absence of evidence-based guidance may have contributed towards the exhibited inconsistencies in practitioner advice. The findings highlight that training should be delivered to equip practitioners with the knowledge and confidence to advise patients effectively; this could subsequently improve smoking cessation rates and patient outcomes.

  9. Staffing for infectious diseases, clinical microbiology and infection control in hospitals in 2015: results of an ESCMID member survey.

    Science.gov (United States)

    Dickstein, Y; Nir-Paz, R; Pulcini, C; Cookson, B; Beović, B; Tacconelli, E; Nathwani, D; Vatcheva-Dobrevska, R; Rodríguez-Baño, J; Hell, M; Saenz, H; Leibovici, L; Paul, M

    2016-09-01

    We aimed to assess the current status of infectious diseases (ID), clinical microbiology (CM) and infection control (IC) staffing in hospitals and to analyse modifiers of staffing levels. We conducted an Internet-based survey of European Society of Clinical Microbiology and Infectious Diseases members and affiliates, collecting data on hospital characteristics, ID management infrastructure, ID/IC-related activities and the ratio of physicians per 100 hospital beds. Regression analyses were conducted to examine factors associated with the physician-bed ratio. Five hundred sixty-seven hospital responses were collected between April and June 2015 from 61 countries, 81.2% (384/473) from Europe. A specialized inpatient ward for ID patients was reported in 58.4% (317/543) of hospitals. Rates of antibiotic stewardship programmes (ASP) and surveillance activities in survey hospitals were high, ranging from 88% to 90% for local antibiotic guidelines and 70% to 82% for programmes monitoring hospital-acquired infections. The median ID/CM/IC physician per 100 hospital beds ratio was 1.12 (interquartile range 0.56-2.13). In hospitals performing basic ASP and IC (including local antibiotic guidelines and monitoring device-related or surgical site infections), the ratio was 1.21 (interquartile range 0.57-2.14). Factors independently associated with higher ratios included compliance with European Union of Medical Specialists standards, smaller hospital size, tertiary-care institution, presence of a travel clinic, beds dedicated to ID and a CM unit. More than half of respondents estimated that additional staffing is needed for appropriate IC or ID management. No standard of physician staffing for ID/CM/IC in hospitals is available. A ratio of 1.21/100 beds will serve as an informed point of reference enabling ASP and infection surveillance. Copyright © 2016 European Society of Clinical Microbiology and Infectious Diseases. Published by Elsevier Ltd. All rights reserved.

  10. Regulating the disposal of cigarette butts as toxic hazardous waste.

    Science.gov (United States)

    Barnes, Richard L

    2011-05-01

    The trillions of cigarette butts generated each year throughout the world pose a significant challenge for disposal regulations, primarily because there are millions of points of disposal, along with the necessity to segregate, collect and dispose of the butts in a safe manner, and cigarette butts are toxic, hazardous waste. There are some hazardous waste laws, such as those covering used tyres and automobile batteries, in which the retailer is responsible for the proper disposal of the waste, but most post-consumer waste disposal is the responsibility of the consumer. Concepts such as extended producer responsibility (EPR) are being used for some post-consumer waste to pass the responsibility and cost for recycling or disposal to the manufacturer of the product. In total, 32 states in the US have passed EPR laws covering auto switches, batteries, carpet, cell phones, electronics, fluorescent lighting, mercury thermostats, paint and pesticide containers, and these could be models for cigarette waste legislation. A broader concept of producer stewardship includes EPR, but adds the consumer and the retailer into the regulation. The State of Maine considered a comprehensive product stewardship law in 2010 that is a much better model than EPR. By using either EPR or the Maine model, the tobacco industry will be required to cover the cost of collecting and disposing of cigarette butt waste. Additional requirements included in the Maine model are needed for consumers and businesses to complete the network that will be necessary to maximise the segregation and collection of cigarette butts to protect the environment.

  11. Safety of sports participation in patients with implantable cardioverter defibrillators: a survey of heart rhythm society members.

    Science.gov (United States)

    Lampert, Rachel; Cannom, David; Olshansky, Brian

    2006-01-01

    Safety of Sports for ICD Patients. The safety of sports participation for patients with implantable cardioverter defibrillators (ICDs) is unknown, and recommendations among physicians may vary widely. The purposes of this study were to determine current practice among patients with ICDs and their physicians regarding sports participation, and to determine how many physicians have cared for patients who have sustained adverse events during sports participation. A survey was mailed to all 1,687 U.S. physician members of the Heart Rhythm Society. Among 614 respondent physicians, recommendations varied widely. Only 10% recommended avoidance of all sports more vigorous than golf. Seventy-six percent recommended avoidance of contact, and 45% recommend avoidance of competitive sports. Most (71%) based restrictions on patients' underlying heart disease. Regardless of recommendations, most physicians (71%) reported caring for patients who participated in sports, including many citing vigorous, competitive sports, most commonly cited were basketball, running, and skiing. ICD shocks during sports were common, cited by 40% of physicians. However, few adverse consequences were reported. One percent of physicians reported known injury to patient (all but 3 minor); 5%, injury to the ICD system, and weightlifting and golf. Physician recommendations for sports participation for patients with ICDs varies widely. Many patients with ICDs do participate in vigorous and even competitive sports. While shocks were common, significant adverse events were rare.

  12. Report of the survey on current opinions and practice of German Society for Gynecologic Endoscopy (AGE) members regarding the laparoscopic treatment of ovarian malignancies.

    Science.gov (United States)

    Radosa, Julia Caroline; Radosa, Marc Philipp; Schweitzer, Pascal Albert; Juhasz-Boess, Ingolf; Rimbach, Stefan; Solomayer, Erich-Franz

    2018-05-01

    The purpose of this survey was to assess the opinions of members of the German Society of Gynecologic Endoscopy (AGE) regarding the laparoscopic treatment of ovarian malignancies and current practice at their institutions. Between February and October 2015, the AGE sent an anonymous online survey via mail to its members. The questionnaire solicited participants' opinions about the laparoscopic treatment of ovarian cancers according to T stage and borderline tumors, and information about current practice at their institutions. Participants were also asked their opinions on currently available data on this issue. Of 228 AGE members who completed the survey, 132 (58%) were fellows or attending physicians and 156 (68%) worked at university hospitals or tertiary referral centers. Most [212 (93%)] respondents stated that < 10% of all ovarian cancer cases were currently treated laparoscopically at their institutions. Most participants indicated that T1 (a, b, c) tumors [145 (64%)] and ovarian borderline tumors [206 (90%)], but not T2 [48 (21%)] or T3/4 [9 (4%) ovarian tumors] should or could be treated laparoscopically. One hundred seventy-two (75%) participants considered currently available data on this topic to be insufficient and 152 (66%) stated that they would take part in a clinical trial assessing a laparoscopic approach to T1/2 ovarian cancer. According to this survey, to the opinion of the majority of AGE members, laparoscopy might be a considerable option for the treatment of early ovarian malignancies and borderline tumors and should be evaluated further in future studies.

  13. Practice pattern of transthoracic needle biopsy: 2016 survey in the members of Korean society of thoracic radiology

    Energy Technology Data Exchange (ETDEWEB)

    Jo, Ye Seul [Dept. of Radiology, Incheon St. Mary' s Hospital, College of Medicine, The Catholic University of Korea, Incheon (Korea, Republic of); Han, Kyong Min [Dept. of Radiology, Seoul St. Mary' s Hospital, College of Medicine, The Catholic University of Korea, Seoul (Korea, Republic of); Park, Jai Soung [Dept. of Radiology, Bucheon Hospital, Soonchunhyang University College of Medicine, Bucheon (Korea, Republic of); Kim, Tae Jung [Dept. of Radiology and Center for Imaging Science, Samsung Medical Center, Sungkyunkwan University School of Medicine, Seoul (Korea, Republic of)

    2017-11-15

    To assess the current practice patterns of radiologists who perform transthoracic needle biopsy (TNB). An email survey of 71 questions on TNB was sent to 240 members of the Korean Society of Thoracic Radiology. The answers to multiple-choice questions (n = 56) were analyzed. Of 60 respondents, 45% had 10 or more years of experience in chest radiology, and 70% had 5 or more years of experience in TNB. For the question on the most frequently used diagnostic method for lesions with high probability of being resectable-stage lung cancer, 70% of respondents answered that TNB is initially used, with or without bronchoscopy. In patients at high-risk of TNB-related complications, the proportion of the respondents who consistently declined TNB was only 5%. The number of rebiopsies was said to be increased; molecular analysis for an established target therapy (43.6%) and clinical trial of a new drug (28.2%) were the two most common reasons for it. The most popular needle type was the coaxial cutting needle (55%), and the popular guiding modality was conventional computed tomography (CT) (56.7%). In addition, 15% of respondents have encountered air embolism. Despite high variation in how TNB is being performed in Korea, some patterns were noted. It is common for patients with resectable-stage lung cancer to undergo TNB prior to surgery. Rebiopsy is now more common than before, with personalized medicine as the most important reason for it. The most popular type of needle is the coaxial system; the most popular modality for guidance is still CT.

  14. Practice pattern of transthoracic needle biopsy: 2016 survey in the members of Korean society of thoracic radiology

    International Nuclear Information System (INIS)

    Jo, Ye Seul; Han, Kyong Min; Park, Jai Soung; Kim, Tae Jung

    2017-01-01

    To assess the current practice patterns of radiologists who perform transthoracic needle biopsy (TNB). An email survey of 71 questions on TNB was sent to 240 members of the Korean Society of Thoracic Radiology. The answers to multiple-choice questions (n = 56) were analyzed. Of 60 respondents, 45% had 10 or more years of experience in chest radiology, and 70% had 5 or more years of experience in TNB. For the question on the most frequently used diagnostic method for lesions with high probability of being resectable-stage lung cancer, 70% of respondents answered that TNB is initially used, with or without bronchoscopy. In patients at high-risk of TNB-related complications, the proportion of the respondents who consistently declined TNB was only 5%. The number of rebiopsies was said to be increased; molecular analysis for an established target therapy (43.6%) and clinical trial of a new drug (28.2%) were the two most common reasons for it. The most popular needle type was the coaxial cutting needle (55%), and the popular guiding modality was conventional computed tomography (CT) (56.7%). In addition, 15% of respondents have encountered air embolism. Despite high variation in how TNB is being performed in Korea, some patterns were noted. It is common for patients with resectable-stage lung cancer to undergo TNB prior to surgery. Rebiopsy is now more common than before, with personalized medicine as the most important reason for it. The most popular type of needle is the coaxial system; the most popular modality for guidance is still CT

  15. GAP WIDTH STUDY IN LASER BUTT-WELDING

    DEFF Research Database (Denmark)

    Gong, Hui; Olsen, Flemming Ove

    power : 2 and 2.6 kW and the focal point position : 0 and -1.2 mm. Quality of all the butt welds are destructively tested according to ISO 13919-1.Influences of the variable process parameters to the maximum allowable gap width are observed as (1) the maximum gap width is inversely related......In this paper the maximum allowable gap width in laser butt-welding is intensively studied. The gap width study (GWS) is performed on the material of SST of W1.4401 (AISI 316) under various welding conditions, which are the gap width : 0.00-0.50 mm, the welding speed : 0.5-2.0 m/min, the laser...... to the welding speed, (2) the larger laser power leads to the bigger maximum allowable gap width and (3) the focal point position has very little influence on the maximum gap width....

  16. Investigation and control of factors influencing resistance upset butt welding.

    OpenAIRE

    Kerstens, N.F.H.

    2010-01-01

    The purpose of this work is to investigate the factors influencing the resistance upset butt welding process to obtain an understanding of the metal behaviour and welding process characteristics, so that new automotive steels can be welded with reduced development time and fewer failures in production. In principle the welding process is rather simple, the materials to be joined are clamped between two electrodes and pressed together. Because there is an interface present with a higher resist...

  17. The Western Environmental Technology Office (WETO), Butte, Montana. Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The Western Environmental Technology Office (WETO) is a multi-purpose engineering test facility located in Butte, Montana, and is managed by MSE, Inc. WETO seeks to contribute to environmental research by emphasizing projects to develop heavy metals removal and recovery processes, thermal vitrification systems, and waste minimization/pollution prevention technologies. WETO`s environmental technology research and testing activities focus on the recovery of usable resources from waste. In one of WETO`s areas of focus, groundwater contamination, water from the Berkeley Pit, located near the WETO site, is being used in demonstrations directed toward the recovery of potable water and metal from the heavy metal-bearing water. The Berkeley Pit is part of an inactive copper mine near Butte that was once part of the nation`s largest open-pit mining operation. The Pit contains approximately 25 billion gallons of Berkeley Pit groundwater and surface water containing many dissolved minerals. As part of DOE/OST`s Resource Recovery Project (RRP), technologies are being demonstrated to not only clean the contaminated water but to recover metal values such as copper, zinc, and iron with an estimated gross value of more than $100 million. When recovered, the Berkeley Pit waters could benefit the entire Butte valley with new water resources for fisheries, irrigation, municipal, and industrial use. At WETO, the emphasis is on environmental technology development and commercialization activities, which will focus on mine cleanup, waste treatment, resource recovery, and water resource management.

  18. The Western Environmental Technology Office (WETO), Butte, Montana. Technology summary

    International Nuclear Information System (INIS)

    1996-03-01

    The Western Environmental Technology Office (WETO) is a multi-purpose engineering test facility located in Butte, Montana, and is managed by MSE, Inc. WETO seeks to contribute to environmental research by emphasizing projects to develop heavy metals removal and recovery processes, thermal vitrification systems, and waste minimization/pollution prevention technologies. WETO's environmental technology research and testing activities focus on the recovery of usable resources from waste. In one of WETO's areas of focus, groundwater contamination, water from the Berkeley Pit, located near the WETO site, is being used in demonstrations directed toward the recovery of potable water and metal from the heavy metal-bearing water. The Berkeley Pit is part of an inactive copper mine near Butte that was once part of the nation's largest open-pit mining operation. The Pit contains approximately 25 billion gallons of Berkeley Pit groundwater and surface water containing many dissolved minerals. As part of DOE/OST's Resource Recovery Project (RRP), technologies are being demonstrated to not only clean the contaminated water but to recover metal values such as copper, zinc, and iron with an estimated gross value of more than $100 million. When recovered, the Berkeley Pit waters could benefit the entire Butte valley with new water resources for fisheries, irrigation, municipal, and industrial use. At WETO, the emphasis is on environmental technology development and commercialization activities, which will focus on mine cleanup, waste treatment, resource recovery, and water resource management

  19. [Reading behavior and preferences regarding subscriptions to scientific journals : Results of a survey of members of the German Society for General and Visceral Surgery].

    Science.gov (United States)

    Ronellenfitsch, U; Klinger, C; Buhr, H J; Post, S

    2015-11-01

    The purpose of surgical literature is to publish the latest study results and to provide continuing medical education to readers. For optimal allocation of resources, institutional subscribers, professional societies and scientific publishers require structured data on reading and subscription preferences of potential readers of surgical literature. To obtain representative data on the preferences of German general and visceral surgeons regarding reading of and subscription to scientific journals. All members of the German Society for General and Visceral Surgery (DGAV) were invited to participate in a web-based survey. Questions were asked on the affiliation and position of the member, individual journal subscriptions, institutional access to scientific journals, preferences regarding electronic or print articles and special subscriptions for society members. Answers were descriptively analyzed. A total of 630 out of 4091 (15 %) members participated in the survey and 73 % of the respondents had at least 1 individual subscription to a scientific journal. The most frequently subscribed journal was Der Chirurg (47 % of respondents). The institutional access to journals was deemed insufficient by 48 % of respondents, predominantly in primary care hospitals and outpatient clinics. Almost half of the respondents gave sufficient importance to reading printed versions of articles for which they would pay extra fees. A group subscription for society members was perceived as advantageous as long as no relevant extra costs were incurred. This structured survey among members of the DGAV provides data on preferences regarding reading of and subscription to scientific journals. Individual subscriptions to journals are still common, possibly due to suboptimal institutional access particularly at smaller non-academic institutions. In an age of online publications it seems surprising that many respondents place a high value on printed versions. The results are relevant for

  20. Survey of gadolinium-based contrast agent utilization among the members of the Society for Pediatric Radiology: a Quality and Safety Committee report

    International Nuclear Information System (INIS)

    Blumfield, Einat; Moore, Michael M.; Drake, Mary K.; Goodman, Thomas R.; Lewis, Kristopher N.; Meyer, Laura T.; Ngo, Thang D.; Sammet, Christina; Stanescu, Arta Luana; Iyer, Ramesh S.; Swenson, David W.; Slovis, Thomas L.

    2017-01-01

    Gadolinium-based contrast agents (GBCAs) have been used for magnetic resonance (MR) imaging over the last three decades. Recent reports demonstrated gadolinium retention in patients' brains following intravenous administration. Since gadolinium is a highly toxic heavy metal, there is a potential for adverse effects from prolonged retention or deposition, particularly in children. For this reason, the Society (SPR) for Pediatric Radiology Quality and Safety committee conducted a survey to evaluate the current status of GBCAs usage among pediatric radiologists. To assess the usage of GBCAs among SPR members. An online 15-question survey was distributed to SPR members. Survey questions pertained to the type of GBCAs used, protocoling workflow, requirement of renal function or pregnancy tests, and various clinical indications for contrast-enhanced MRI examinations. A total of 163 survey responses were compiled (11.1% of survey invitations), the majority of these from academic institutions in the United States. Ninety-four percent reported that MR studies are always or usually protocoled by pediatric radiologists. The most common GBCA utilized by survey respondents were Eovist (60.7%), Ablavar (45.4%), Gadovist (38.7%), Magnevist (34.4%) and Dotarem (32.5%). For several clinical indications, survey responses regarding GBCA administration were concordant with American College of Radiology (ACR) Appropriateness Criteria, including seizures, headache and osteomyelitis. For other indications, including growth hormone deficiency and suspected vascular ring, survey responses revealed potential overutilization of GBCAs when compared to ACR recommendations. Survey results demonstrate that GBCAs are administered judiciously in children, yet there is an opportunity to improve their utilization with the goal of reducing potential future adverse effects. (orig.)

  1. Survey of gadolinium-based contrast agent utilization among the members of the Society for Pediatric Radiology: a Quality and Safety Committee report.

    Science.gov (United States)

    Blumfield, Einat; Moore, Michael M; Drake, Mary K; Goodman, Thomas R; Lewis, Kristopher N; Meyer, Laura T; Ngo, Thang D; Sammet, Christina; Stanescu, Arta Luana; Swenson, David W; Slovis, Thomas L; Iyer, Ramesh S

    2017-05-01

    Gadolinium-based contrast agents (GBCAs) have been used for magnetic resonance (MR) imaging over the last three decades. Recent reports demonstrated gadolinium retention in patients' brains following intravenous administration. Since gadolinium is a highly toxic heavy metal, there is a potential for adverse effects from prolonged retention or deposition, particularly in children. For this reason, the Society (SPR) for Pediatric Radiology Quality and Safety committee conducted a survey to evaluate the current status of GBCAs usage among pediatric radiologists. To assess the usage of GBCAs among SPR members. An online 15-question survey was distributed to SPR members. Survey questions pertained to the type of GBCAs used, protocoling workflow, requirement of renal function or pregnancy tests, and various clinical indications for contrast-enhanced MRI examinations. A total of 163 survey responses were compiled (11.1% of survey invitations), the majority of these from academic institutions in the United States. Ninety-four percent reported that MR studies are always or usually protocoled by pediatric radiologists. The most common GBCA utilized by survey respondents were Eovist (60.7%), Ablavar (45.4%), Gadovist (38.7%), Magnevist (34.4%) and Dotarem (32.5%). For several clinical indications, survey responses regarding GBCA administration were concordant with American College of Radiology (ACR) Appropriateness Criteria, including seizures, headache and osteomyelitis. For other indications, including growth hormone deficiency and suspected vascular ring, survey responses revealed potential overutilization of GBCAs when compared to ACR recommendations. Survey results demonstrate that GBCAs are administered judiciously in children, yet there is an opportunity to improve their utilization with the goal of reducing potential future adverse effects.

  2. Survey of gadolinium-based contrast agent utilization among the members of the Society for Pediatric Radiology: a Quality and Safety Committee report

    Energy Technology Data Exchange (ETDEWEB)

    Blumfield, Einat [Jacobi Medical Center, Department of Radiology, Albert Einstein College of Medicine, South Bronx, NY (United States); Moore, Michael M. [The Pennsylvania State University College of Medicine, Department of Radiology, Penn State Hershey Children' s Hospital, Hershey, PA (United States); Drake, Mary K. [University of Nebraska Medical Center, Department of Radiology, Children' s Hospital and Medical Center, Omaha, NE (United States); Goodman, Thomas R. [Yale School of Medicine, Department of Radiology and Biomedical Imaging, New Haven, CT (United States); Lewis, Kristopher N. [Augusta University, Department of Radiology, Children' s Hospital of Georgia, Augusta, GA (United States); Meyer, Laura T. [Wake Radiology, Raleigh, NC (United States); Ngo, Thang D. [Nemours Children' s Hospital, Department of Medical Imaging, Orlando, FL (United States); Sammet, Christina [Ann and Robert H. Lurie Children' s Hospital of Chicago, Department of Radiology, Chicago, IL (United States); Stanescu, Arta Luana; Iyer, Ramesh S. [Seattle Children' s Hospital, University of Washington School of Medicine, Department of Radiology, Seattle, WA (United States); Swenson, David W. [Warren Alpert Medical School of Brown University, Department of Diagnostic Imaging, Providence, RI (United States); Slovis, Thomas L. [Children' s Hospital of Michigan, Wayne State University School of Medicine, Department of Radiology, Detroit, MI (United States)

    2017-05-15

    Gadolinium-based contrast agents (GBCAs) have been used for magnetic resonance (MR) imaging over the last three decades. Recent reports demonstrated gadolinium retention in patients' brains following intravenous administration. Since gadolinium is a highly toxic heavy metal, there is a potential for adverse effects from prolonged retention or deposition, particularly in children. For this reason, the Society (SPR) for Pediatric Radiology Quality and Safety committee conducted a survey to evaluate the current status of GBCAs usage among pediatric radiologists. To assess the usage of GBCAs among SPR members. An online 15-question survey was distributed to SPR members. Survey questions pertained to the type of GBCAs used, protocoling workflow, requirement of renal function or pregnancy tests, and various clinical indications for contrast-enhanced MRI examinations. A total of 163 survey responses were compiled (11.1% of survey invitations), the majority of these from academic institutions in the United States. Ninety-four percent reported that MR studies are always or usually protocoled by pediatric radiologists. The most common GBCA utilized by survey respondents were Eovist (60.7%), Ablavar (45.4%), Gadovist (38.7%), Magnevist (34.4%) and Dotarem (32.5%). For several clinical indications, survey responses regarding GBCA administration were concordant with American College of Radiology (ACR) Appropriateness Criteria, including seizures, headache and osteomyelitis. For other indications, including growth hormone deficiency and suspected vascular ring, survey responses revealed potential overutilization of GBCAs when compared to ACR recommendations. Survey results demonstrate that GBCAs are administered judiciously in children, yet there is an opportunity to improve their utilization with the goal of reducing potential future adverse effects. (orig.)

  3. Effect of unaffordable medical need on distress level of family member: analyses of 1997-2013 United States National Health Interview Surveys.

    Science.gov (United States)

    Chih, Hui Jun; Liang, Wenbin

    2017-09-02

    Reduced funding to public health care systems during economic downturns is a common phenomenon around the world. The effect of health care cost on family members of the patients has not been established. This paper aims to explore the relationship between affordability of health care and vulnerability of family members to distress levels. Data of a total of 262,843 participants were obtained from 17 waves (1997-2013) of the United States National Health Interview Survey. Multinomial logistic regression was used to investigate psychological distress level as a result of having family members who experienced unmet medical needs due to cost. Among participants without family members who experienced unmet needs for medical care due to cost, risks of having 'moderate' (score of 5-12) or 'serious' (score of 13 or above) level of psychological distress were 1.0% and 11.5%, respectively. Risks of having 'moderate' or 'serious' level of psychological distress were 3.1% and 23.4%, respectively among participants with family members who experienced unmet needs. The adjusted relative risk ratio of 'moderate' and 'serious', as compared to 'normal' level of psychological distress, were 1.58 (95% confidence interval: 1.47-1.69) and 2.09 (95% confidence interval: 1.78-2.45) if one's family members experienced unmet medical needs. Unmet medical needs due to cost increases risk of distress levels experienced by family members. Careful planning and adequate funding to public health care system could be implemented to prevent any unnecessary detrimental effect on mental health among family members of the unwell and any further increment of the prevalence of mental illnesses. This recommendation aligns with the World Health Organization Mental Health Action Plan 2013-2020.

  4. Preliminary geologic map of the Sleeping Butte volcanic centers

    International Nuclear Information System (INIS)

    Crowe, B.M.; Perry, F.V.

    1991-07-01

    The Sleeping Butte volcanic centers comprise two, spatially separate, small-volume ( 3 ) basaltic centers. The centers were formed by mildly explosive Strombolian eruptions. The Little Black Peak cone consists of a main scoria cone, two small satellitic scoria mounds, and associated lobate lava flows that vented from sites at the base of the scoria cone. The Hidden Cone center consists of a main scoria cone that developed on the north-facing slope of Sleeping Butte. The center formed during two episodes. The first included the formation of the main scoria cone, and venting of aa lava flows from radial dikes at the northeast base of the cone. The second included eruption of scoria-fall deposits from the summit crater. The ages of the Little Black Peak and the Hidden Cone are estimated to be between 200 to 400 ka based on the whole-rock K-Ar age determinations with large analytical undertainty. This age assignment is consistent with qualitative observations of the degree of soil development and geomorphic degradation of volcanic landforms. The younger episode of the Hidden Cone is inferred to be significantly younger and probably of Late Pleistocene or Holocene age. This is based on the absence of cone slope rilling, the absence of cone-slope apron deposits, and erosional unconformity between the two episodes, the poor horizon- development of soils, and the presence of fall deposits on modern alluvial surfaces. Paleomagnetic data show that the centers record similar but not identical directions of remanent magnetization. Paleomagnetic data have not been obtained for the youngest deposits of the Hidden Cone center. Further geochronology, soils, geomorphic, and petrology studies are planned of the Sleeping Butte volcanic centers 20 refs., 3 figs

  5. Littered cigarette butts as a source of nicotine in urban waters

    Science.gov (United States)

    Roder Green, Amy L.; Putschew, Anke; Nehls, Thomas

    2014-11-01

    The effect of nicotine from littered cigarette butts on the quality of urban water resources has yet to be investigated. This two-part study addresses the spatial variation, seasonal dynamics and average residence time of littered cigarette butts in public space, as well as the release of nicotine from cigarette butts to run-off in urban areas during its residence time. Thereby, we tested two typical situations: release to standing water in a puddle and release during alternating rainfall and drying. The study took place in Berlin, Germany, a city which completely relies on its own water resources to meet its drinking water demand. Nine typical sites located in a central district, each divided into 20 plots were studied during five sampling periods between May 2012 and February 2013. The nicotine release from standardized cigarette butts prepared with a smoking machine was examined in batch and rainfall experiments. Littered cigarette butts are unevenly distributed among both sites and plots. The average butt concentration was 2.7 m-2 (SD = 0.6 m-2, N = 862); the maximum plot concentration was 48.8 butts m-2. This heterogeneity is caused by preferential littering (gastronomy, entrances, bus stops), redistribution processes such as litter removal (gastronomy, shop owners), and the increased accumulation in plots protected from mechanized street sweeping (tree pits, bicycle stands). No significant seasonal variation of cigarette butt accumulation was observed. On average, cigarette butt accumulation is characterized by a 6 days cadence due to the rhythm and effectiveness of street sweeping (mean weekly butt accumulation rate = 0.18 m-2 d-1; SD = 0.15 m-1). Once the butt is exposed to standing water, elution of nicotine occurs rapidly. Standardized butts released 7.3 mg g-1 nicotine in a batch experiment (equivalent to 2.5 mg L-1), 50% of which occurred within the first 27 min. In the rainfall experiment, the cumulative nicotine release from fifteen consecutive

  6. A Neural Network Approach for GMA Butt Joint Welding

    DEFF Research Database (Denmark)

    Christensen, Kim Hardam; Sørensen, Torben

    2003-01-01

    This paper describes the application of the neural network technology for gas metal arc welding (GMAW) control. A system has been developed for modeling and online adjustment of welding parameters, appropriate to guarantee a certain degree of quality in the field of butt joint welding with full...... penetration, when the gap width is varying during the welding process. The process modeling to facilitate the mapping from joint geometry and reference weld quality to significant welding parameters has been based on a multi-layer feed-forward network. The Levenberg-Marquardt algorithm for non-linear least...

  7. A Neural Network Approach for GMA Butt Joint Welding

    DEFF Research Database (Denmark)

    Christensen, Kim Hardam; Sørensen, Torben

    2003-01-01

    penetration, when the gap width is varying during the welding process. The process modeling to facilitate the mapping from joint geometry and reference weld quality to significant welding parameters has been based on a multi-layer feed-forward network. The Levenberg-Marquardt algorithm for non-linear least......This paper describes the application of the neural network technology for gas metal arc welding (GMAW) control. A system has been developed for modeling and online adjustment of welding parameters, appropriate to guarantee a certain degree of quality in the field of butt joint welding with full...

  8. Observations of elk movement patterns on Fossil Butte National Monument

    Science.gov (United States)

    Olexa, Edward M.; Soileau, Suzanna Carrithers.; Allen, Leslie A.

    2014-01-01

    The elk herd that frequents Fossil Butte National Monument, a subset of the West Green River elk population, provides visitors with seasonal opportunities to view an iconic species of the western United States. Throughout the year, these elk range across a variety of private, State, and Federal lands within close proximity to the Monument. These lands are managed differently for various uses which can create challenging wildlife-management issues and influence the herd’s seasonal movements and distribution. Research lead by the USGS investigates some of the factors associated with these seasonal changes.

  9. Spouses of Military Members' Experiences and Insights: Qualitative Analysis of Responses to an Open-Ended Question in a Survey of Health and Wellbeing

    Science.gov (United States)

    Runge, Catherine E.; Waller, Michael; MacKenzie, Alison; McGuire, Annabel C. L.

    2014-01-01

    Introduction There are few studies on the experiences of spouses of military members, with most focused on adverse impacts of deployment. Responses to an open-ended question in a survey of spouses' health and wellbeing enabled access to perceptions and insights on a broad range of topics. The objective of this investigation was to examine how respondents used the open-ended question and what they discussed, in aim of informing support service agencies and spouses of military members. Methods Thematic analysis was conducted on responses to the open-ended question. Descriptive analysis was performed on the demographics, military member characteristics and self-reported health of respondents and non-respondents to the open-ended question. Findings Over a quarter (28.5%) of the 1,332 survey participants answered the open-ended question, with respondents having a significantly higher level of education than non–respondents. Respondents expressed negative and positive experiences and insights on military life, provided personal information, commented on the survey, and qualified their responses to closed-ended questions. Topics included ‘inadequate support’, ‘deployment impacts’, ‘suggestions for supporting agencies’, ‘appraisal of experiences’ and ‘coping strategies’. Conclusions This investigation uncovered issues of importance to spouses of military members that were not included or identified in a quantitative study. The findings provide a platform from which to explore these issues further, particularly the impact of military life on the non-serving spouse's career. The findings also provide support agencies with evidence to strengthen their services and they give spouses an opportunity to reflect on their own and others' feelings and evaluations of military life. PMID:25479135

  10. Return to sport after ACL reconstruction: a survey between the Italian Society of Knee, Arthroscopy, Sport, Cartilage and Orthopaedic Technologies (SIGASCOT) members.

    Science.gov (United States)

    Grassi, Alberto; Vascellari, Alberto; Combi, Alberto; Tomaello, Luca; Canata, Gian Luigi; Zaffagnini, Stefano

    2016-07-01

    A worldwide consensus for timing and criteria for return to sport after anterior cruciate ligament (ACL) reconstruction is lacking. The aim of the study was to survey among the Italian Society of Knee, Arthroscopy, Sport, Cartilage and Orthopaedic Technologies (SIGASCOT) members in order to evaluate their approaches to the return to sport after ACL reconstruction regarding timing and criteria. A web survey among the SIGASCOT members was performed, including 14 questions regarding technical and graft preferences, timing for return to training and competitive activity for contact and non-contact sports and criteria to allow return to sport. Totally, 123 members completed the questionnaire. Return to training sports was allowed within 6 month by 87 % for non-contact sports and by 53 % for contact sports. Return to competitive activity was allowed within 6 months by 48 % for non-contact sports and by 13 % for contact sports. Full ROM (77 %), Lachman test (65 %) and Pivot-Shift test (65 %) were the most used criteria to allow return to sport. The 90 % used at least one clinical score. The SIGASCOT members showed various approaches in the return to sport after ACL reconstruction, with differences between return to training or competitive activity, and between contact and non-contact sports. Six months was generally considered adequate by most of the members for the most demanding activities. The most used criteria to allow return to sport were manual testing. A clear definition of sport activities and more objective criteria for the return to sport are needed. Level V, expert opinion.

  11. Electronic cigarettes: a survey of perceived patient use and attitudes among members of the British thoracic oncology group

    OpenAIRE

    Sherratt, Frances C.; Newson, Lisa; Field, John K.

    2016-01-01

    BACKGROUND: Smoking cessation following lung cancer diagnosis has been found to improve several patient outcomes. Electronic cigarette (e-cigarette) use is now prevalent within Great Britain, however, use and practice among patients with lung cancer has not as yet been explored. The current study aims to explore e-cigarette use among patients and examine current practice among clinicians. The results have important implications for future policy and practice. METHODS: Members of The British T...

  12. Radio and television use in Butte County, California: application to fire prevention

    Science.gov (United States)

    William S. Folkman

    1975-01-01

    A sample of Butte County residents were interviewed about their radio and television use habits. Their responses were analyzed in terms of demographic, social, and economic characteristics. The findings can be used in developing more effective fire prevention programs. Most people in Butte County listen to the radio or watch television but they differ widely in the way...

  13. 77 FR 39735 - Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines

    Science.gov (United States)

    2012-07-05

    ... revocation of the antidumping duty orders on stainless steel butt-weld pipe fittings From Italy, Malaysia... INTERNATIONAL TRADE COMMISSION [Investigation Nos. 731-TA-865-867 (Second Review)] Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines Determination On the basis of the...

  14. 75 FR 76025 - Stainless Steel Butt-Weld Pipe Fittings From Japan, Korea, and Taiwan

    Science.gov (United States)

    2010-12-07

    ... INTERNATIONAL TRADE COMMISSION [Investigation Nos. 731-TA-376 and 563-564 (Third Review)] Stainless Steel Butt-Weld Pipe Fittings From Japan, Korea, and Taiwan AGENCY: United States International... steel butt-weld pipe fittings from Japan, Korea, and Taiwan would be likely to lead to continuation or...

  15. Relationship between the number of family members and stress by gender: Cross-sectional analysis of the fifth Korea National Health and Nutrition Examination Survey.

    Science.gov (United States)

    Noh, Jin-Won; Kim, Kyoung-Beom; Park, Jumin; Hong, Janghun; Kwon, Young Dae

    2017-01-01

    Due to gendered inequalities in the division of domestic work, women with paid employment and family caregiving responsibilities can feel extremely tired with general distress and depression. Therefore, the purpose of this study was to examine the association between the number of family members and stress level by gender among Korean adults using a nationally representative dataset. We used a sample of 6,293 subjects aged 19 or older (3,629 female and 2,264 male) from the fifth Korea National Health and Nutrition Examination Survey. A multivariable logistic regression analysis with sociodemographic and health-related characteristics was conducted. Because there were gender differences, a stratified analysis was performed for each gender. Age, number of family members, education level, occupational status, depression, self-rated health status, and chronic diseases were found to have a significant association with stress level in the study subjects (pstress increased among females from family with two members (OR 1.521), three family members (OR 1.893), or four or more family members without spouse (OR 2.035) compared to those who live alone. We found that unmarried women are more likely to be stressed as the number of family members increases. Gender expectations giving women the main responsibility for domestic and care work may become a source of stress. Reconciliation of family and work remains women's responsibility in Korea. As family problems are recently becoming a big issue, our study shows the importance of considering gender difference in studies on stress according to family roles and functions.

  16. VIP visit to CERN P5 CMS of Pakistan Science Members

    CERN Multimedia

    Hoch, Michael

    2012-01-01

    VIP visit to CERN P5 CMS of PAEC & JCPC Science Members List of PAEC Visitors: Dr. Badar Suleman - Member Science PAEC & Member of JCPC Dr. Waqar M. Butt - Member Engineering (Head of HMC3) Dr. Maqsood Ahmad - Chief Scientist (Head of Accelerator Project) List of CMS participants: Prof. Joseph Incandela, CMS Spokesperson Dr. Austin Ball, CMS Technical Coordinator Mr Andrzej Charkiewicz, CMS Resources Manager Dr. Michael Hoch, CMS Outreach activities, CMS photographer and guide Dr. Achille Petrilli, CMS Team Leader

  17. Nursing care for oral complications associated with chemotherapy. A survey among members of the Dutch Oncology Nursing Society

    NARCIS (Netherlands)

    Nieweg, R.; van Tinteren, H.; Poelhuis, E. K.; Abraham-Inpijn, L.

    1992-01-01

    The incidence of oral complications among adult cancer patients undergoing chemotherapy varies from 12% to 80%. Adequate oral hygiene has been shown to be important in prevention, and an essential role is reserved for the nursing staff. These considerations prompted the decision to survey, by means

  18. 77 FR 14002 - Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines: Final Results...

    Science.gov (United States)

    2012-03-08

    ...] Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines: Final Results of the... Duty Orders on Stainless Steel Butt-Weld Pipe Fittings from Italy, Malaysia, and the Philippines'' from... Commerce (the Department) initiated sunset reviews of the antidumping duty orders on stainless steel butt...

  19. 77 FR 42697 - Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines: Continuation...

    Science.gov (United States)

    2012-07-20

    ...] Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines: Continuation of... from Italy, Malaysia, and the Philippines.\\2\\ \\1\\ See Antidumping Duty Orders: Stainless Steel Butt...), titled Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines (Investigation...

  20. 76 FR 67473 - Stainless Steel Butt-Weld Pipe Fittings from Italy, Malaysia, and The Philippines; Institution of...

    Science.gov (United States)

    2011-11-01

    ... Concerning the Antidumping Duty Orders on Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and... stainless steel butt-weld pipe fittings from Italy, Malaysia, and the Philippines would be likely to lead to... antidumping duty orders on imports of stainless steel butt-weld pipe fittings from Italy, Malaysia, and the...

  1. Public Stigma Toward Mental Illness in Jordan: A Cross-Sectional Survey of Family Members of Individuals With Schizophrenia, Depression, and Anxiety.

    Science.gov (United States)

    Hasan, Abd Al-Hadi; Musleh, Mahmoud

    2017-06-01

    Stigma affects family members of individuals with mental illness. A survey of 640 family members of individuals with mental illness was conducted. Three factors were found to influence stigma regarding schizophrenia, depression, and anxiety: (a) preconceived stereotypes, (b) a sense of personal responsibility or blame for the condition, and (c) perceptions of the patient's inability to recover from the condition. A stronger association between negative stereotypes and inability to recover was found with schizophrenia than depression or anxiety. Conversely, depression and anxiety were found to be correlated with personal responsibility or blame for the condition. The public perception of mental health conditions (e.g., depression, anxiety, schizophrenia) has a crucial role in deriving programs for reducing stigma and raising awareness. Personalized and efficacious treatment regimens may be facilitated by understanding these perceptions and the underlying explanations for why they exist. [Journal of Psychosocial Nursing and Mental Health Services, 55(6), 36-43.]. Copyright 2017, SLACK Incorporated.

  2. Utilisation of academic nursing competence in Europe - A survey among members of the European Academy of Nursing Science

    DEFF Research Database (Denmark)

    Hanssen, Tove Aminda; Olsen, Pia Riis

    2018-01-01

    academic nurses' competencies are used and in what positions. AIM: To understand the progression of nurses' academic careers following completion of the EANS Summer School and to picture how research and academic skills of the nurses are being used for research and/or other fields in nursing. METHODS: We......BACKGROUND: In line with national and international strategies in Europe, the number of nurses with a doctoral degree has increased. The European Academy of Nursing Science (EANS) has for 18years delivered a three-year doctoral summer school for nurses. Questions have been raised in terms of how...... commenced a cross-sectional survey. Former EANS Summer School participants were invited to take part in the online survey with questions developed specifically for this study. The study conformed to the principle of good clinical research practice and was reviewed and approved by the EANS Board. RESULTS...

  3. Utilisation of academic nursing competence in Europe - A survey among members of the European Academy of Nursing Science.

    Science.gov (United States)

    Hanssen, Tove Aminda; Olsen, Pia Riis

    2018-02-01

    In line with national and international strategies in Europe, the number of nurses with a doctoral degree has increased. The European Academy of Nursing Science (EANS) has for 18years delivered a three-year doctoral summer school for nurses. Questions have been raised in terms of how academic nurses' competencies are used and in what positions. To understand the progression of nurses' academic careers following completion of the EANS Summer School and to picture how research and academic skills of the nurses are being used for research and/or other fields in nursing. We commenced a cross-sectional survey. Former EANS Summer School participants were invited to take part in the online survey with questions developed specifically for this study. The study conformed to the principle of good clinical research practice and was reviewed and approved by the EANS Board. Of 380 former participants, 308 were eligible for participating in the survey. A total of 140 (45%) responded. The respondents originated from 21 countries. Sixty-nine percent had their main position in universities or university colleges and 25% in healthcare organisations. More than 80% were involved in research, teaching and supervision, and 26% were involved in direct client/patients care while 71% reported doing postdoctoral research where descriptive research designs dominated. The research topics covered a large variety of aspects in clinical nursing, education, development and theory. The EANS Summer School is an example of an effort to improve nurses' academic competencies. The survey indicates that the competencies of academically trained nurses in Europe primarily are used in universities and educational institutions. However, a large proportion is working close to and in collaboration with clinical practice. Evidence of the legacy of having undergone the EANS Summer School includes using advanced research methods and collaboration with the international EANS network. Copyright © 2017 Elsevier

  4. SUSTAINABLE DECISION MAKING UNDER THE CRISIS FOR TOURISM BUSINESSES: A SURVEY OF THE LITERATURE FOR EU MEMBER STATES

    Directory of Open Access Journals (Sweden)

    Stefania Lucia BODOSCA

    2015-08-01

    Full Text Available The last years have proven to be particular problematic for member states of UE because of the financial crisis. When we discus about tourism businesses and the measures undertaken by managers to mitigate the effects of the crisis some of them were to reduce the part allocated for expenditures regarding innovation, technologic improvements and went for different types of approaches. An increased attention has been given to sustainable development, sustainable marketing and development in environmental accounting techniques and in our research we explore how they changed the course of the core of the business and how these initiatives are realistic. The overall finding is that sustainable actions exist and they are present in many strategies but they are poorly translated in real actions.

  5. Sentence completion tests: a review of the literature and results of a survey of members of the Society for Personality Assessment.

    Science.gov (United States)

    Holaday, M; Smith, D A; Sherry, A

    2000-06-01

    Test usage surveys consistently find that sentence completion tests (SCTs) are among the most popular personality assessment instruments used by practitioners. What is not noted is which SCTs practitioners are using, why these tests are so popular, and whether practitioners are using formal scoring. We surveyed a random selection of 100 members of the Society for Personality Assessment. With a 60% return rate on a single mailing, we found that most psychologists who use incomplete sentence tests use the Rotter (1951) Incomplete Sentences Blank with children (18%), adolescents (32%), and adults (47%). Most practitioners said they do not read stems aloud and record answers themselves, and even fewer said they use formal scoring. The most common reasons for using an SCT are (a) to use it as part of an assessment battery (41 endorsements), (b) to determine personality structure (18 endorsements), and (c) to elicit quotable quotes (17 endorsements). Implications for practitioners and training suggestions for academicians who prepare future psychologists are noted.

  6. The Western Environmental Technology Office (WETO), Butte, Montana, technology summary

    International Nuclear Information System (INIS)

    1994-09-01

    This document has been prepared by the DOE Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation activities funded through the Western Environmental Technology Office (WETO) in Butte, Montana. Technologies and processes described have the potential to enhance DOE's cleanup and waste management efforts, as well as improve US industry's competitiveness in global environmental markets. WETO's environmental technology research and testing activities focus on the recovery of useable resources from waste. Environmental technology development and commercialization activities will focus on mine cleanup, waste treatment, resource recovery, and water resource management. Since the site has no record of radioactive material use and no history of environmental contamination/remediation activities, DOE-EM can concentrate on performing developmental and demonstration activities without the demands of regulatory requirements and schedules. Thus, WETO will serve as a national resource for the development of new and innovative environmental technologies

  7. The Western Environmental Technology Office (WETO), Butte, Montana, technology summary

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    This document has been prepared by the DOE Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation activities funded through the Western Environmental Technology Office (WETO) in Butte, Montana. Technologies and processes described have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. WETO`s environmental technology research and testing activities focus on the recovery of useable resources from waste. Environmental technology development and commercialization activities will focus on mine cleanup, waste treatment, resource recovery, and water resource management. Since the site has no record of radioactive material use and no history of environmental contamination/remediation activities, DOE-EM can concentrate on performing developmental and demonstration activities without the demands of regulatory requirements and schedules. Thus, WETO will serve as a national resource for the development of new and innovative environmental technologies.

  8. The Western Environmental Technology Office (WETO) Butte, Montana

    International Nuclear Information System (INIS)

    1994-10-01

    This document has been prepared to highlight the research, development, demonstration, testing and evaluation activities funded through the Western Environmental Technology Office (WETO) in Butte, Montana. Technologies and processes described have the potential to enhance DOE's cleanup and waste management efforts, as well as improve US industry's competitiveness in global environmental markets. This information has been assembled from recently produced Office of Technology Development (OTD) documents which highlight technology development activities within each of the OTD program elements. Projects include: Heavy metals contaminated soil project; In Situ remediation integrated program; Minimum additive waste stabilization program; Resource recovery project; Buried waste integrated demonstration; Mixed waste integrated program; Pollution prevention program; and Mine waste technology program

  9. Features of residual stresses in duplex stainless steel butt welds

    Science.gov (United States)

    Um, Tae-Hwan; Lee, Chin-Hyung; Chang, Kyong-Ho; Nguyen Van Do, Vuong

    2018-04-01

    Duplex stainless steel finds increasing use as an alternative to austenitic stainless steel, particularly where chloride or sulphide stress corrosion cracking is of primary concern, due to the excellent combination of strength and corrosion resistance. During welding, duplex stainless steel does not create the same magnitude or distribution of weld-induced residual stresses as those in welded austenitic stainless steel due to the different physical and mechanical properties between them. In this work, an experimental study on the residual stresses in butt-welded duplex stainless steel is performed utilizing the layering technique to investigate the characteristics of residual stresses in the weldment. Three-dimensional thermos-mechanical-metallurgical finite element analysis is also performed to confirm the residual stress measurements.

  10. BUSTED BUTTE TEST FACILITY GROUND SUPPORT CONFIRMATION ANALYSIS

    International Nuclear Information System (INIS)

    Bonabian, S.

    1998-01-01

    The main purpose and objective of this analysis is to confirm the validity of the ground support design for Busted Butte Test Facility (BBTF). The highwall stability and adequacy of highwall and tunnel ground support is addressed in this analysis. The design of the BBTF including the ground support system was performed in a separate document (Reference 5.3). Both in situ and seismic loads are considered in the evaluation of the highwall and the tunnel ground support system. In this analysis only the ground support designed in Reference 5.3 is addressed. The additional ground support installed (still work in progress) by the constructor is not addressed in this analysis. This additional ground support was evaluated by the A/E during a site visit and its findings and recommendations are addressed in this analysis

  11. Use of pulsed arc welding for butt joint fabrication

    International Nuclear Information System (INIS)

    Merkulov, B.A.

    1977-01-01

    A technology of pulsed-arc butt welding with periodic wire feed to the welding zone has been developed. The pulsed arc is suitable both for submerged and gas-shielded weldings. The technology proposed has some advantages over the stationary-arc welding. Control of the amplitude-frequency characteristics of the process enables one to affect melting and crystallization conditions of the welding crater, weld shape, relation between melting and deposited metal section areas, etc., as well as to reduce heat contribution to the base metal. The new process is shown to be applicable in power engineering. Automatic submerged welding conditions are given for low-carbon and pearlitic heat-resistant steels

  12. Predictors, Quality Markers, and Economics of Volunteering Internationally: Results from a Comprehensive Survey of American Society of Plastic Surgeons Members.

    Science.gov (United States)

    McIntyre, Joyce K; Schoenbrunner, Anna R; Kelley, Kristen D; Gosman, Amanda A

    2017-09-01

    Plastic surgeons have a long history of international volunteer work. To date, there have been no outcome-based studies among surgeons who volunteer internationally. The purpose of this study was to describe predictors of volunteering, clinical quality markers, and economics of international volunteering among American plastic surgeons. A cross-sectional validated e-mail survey tool was sent to all board-certified plastic surgeons by the American Society of Plastic Surgeons. The survey response rate was 15 percent (745 total individuals), of which 283 respondents traveled within the past 5 years. Analysis was performed in R. Stepwise multivariate logistic regression was performed to determine the predictors of death/complication. Respondents reported high use of medical records, follow-up care, and host affiliation. Fewer than half of all respondents reported use of international safety surgery guidelines, and the majority of respondents reported volunteering abroad outside of their scope of practice. The majority of children younger than 5 years were not cared for by a pediatric anesthesiologist. The majority of participants reported personally spending more than $1000 on their last trip and performing surgery estimated to be worth on average $28,000 each. International surgical volunteer trips attempt to ease the global burden of surgical disease. The authors' study reports variation in quality of care provided on these trips. Most significantly, the majority of children younger than 5 years were not cared for by a pediatric anesthesiologist, and many plastic surgeons operated outside of their scope of practice.

  13. Emergency ultrasound and echocardiography in patients with infarct-related cardiogenic shock : A survey among members of the German Society of Medical Intensive Care and Emergency Medicine.

    Science.gov (United States)

    Michels, G; Hempel, D; Pfister, R; Janssens, U

    2018-04-09

    Current international and national guidelines promote the use of emergency echocardiography in patients with cardiogenic shock. We assessed whether these recommendations are followed in clinical practice of infarct-related cardiogenic shock patients. For this purpose we conducted a web-based survey among all members of the German Society of Medical Intensive Care and Emergency Medicine (DGIIN); 40% of the DGIIN members completed the survey. Participants reported that in their department emergency echocardiography/ultrasound is performed on most patients in infarct-related cardiogenic shock presenting to the emergency department/chest pain unit or intensive care unit (58.6% versus 81.4%). Only 33% stated that on patients admitted directly to the catheterization laboratory emergency ultrasound/echocardiography is applied in their institution. Local availability of a standardized algorithm was lacking in the majority of departments (77.2%). A great proportion (38.3%) of participants stated that they personally had no formal training in emergency ultrasound. In order to meet the demands of the current guidelines, in addition to integration of ultrasound examinations into diagnostic algorithms, a structured training of all emergency and intensive care physicians is necessary.

  14. Prevalence and interest in the practice of scratch testing for contact urticaria: a survey of the American contact dermatitis society members.

    Science.gov (United States)

    Orb, Quinn; Millsop, Jillian Wong; Harris, KaLynne; Powell, Douglas

    2014-01-01

    Contact urticaria (CU) is the development of a wheal and flare on the skin after topical exposure to a particular chemical or compound. It can be diagnosed through a variety of techniques. Many chemicals that cause a type IV allergy can also cause CU. The incidence of CU to these chemicals is unknown. The aim of this study was to evaluate the opinions of the American Contact Dermatitis Society members regarding CU and scratch testing. We distributed an electronic survey to the American Contact Dermatitis Society members regarding observed prevalence of CU, frequency of scratch testing in clinical practice, and interest in learning about scratch testing in diagnosing CU and other skin contact conditions. We distributed 508 surveys and received 133 responses. Seventeen percent reported that CU was extremely rare, 32% reported that CU was rare, and 38.9% reported that CU was infrequent. Alternatively, 10.7% believed that CU was common, and 1.5% believed that CU was extremely common. A minority, 19.1%, performed scratch testing on patients with suspected CU. Most respondents, 54.6%, were interested in learning about scratch testing. Additional education regarding scratch testing could increase comfort and use of scratch testing in clinical practice. Further studies are needed to evaluate the prevalence of CU in the general population and better guide the use of testing for dermatologic patients.

  15. Prioritizing Approaches to Engage Community Members and Build Trust in Biobanks: A Survey of Attitudes and Opinions of Adults within Outpatient Practices at the University of Maryland

    Directory of Open Access Journals (Sweden)

    Casey Lynnette Overby

    2015-07-01

    Full Text Available Background: Achieving high participation of communities representative of all sub-populations is needed in order to ensure broad applicability of biobank study findings. This study aimed to understand potentially mutable attitudes and opinions commonly correlated with biobank participation in order to inform approaches to promote participation in biobanks. Methods: Adults from two University of Maryland (UMD Faculty Physicians, Inc. outpatient practices were invited to watch a video and complete a survey about a new biobank initiative. We used: Chi-square to assess the relationship between willingness to join the biobank and participant characteristics, other potentially mutable attitudes and opinions, and trust in the UMD. We also used t-test to assess the relationship with trust in medical research. We also prioritize proposed actions to improve attitudes and opinions about joining biobanks according to perceived responsiveness. Results: 169 participants completed the study, 51% of whom indicated a willingness to join the biobank. Willingness to join the biobank was not associated with age, gender, race, or education but was associated with respondent comfort sharing samples and clinical information, concerns related to confidentiality, potential for misuse of information, trust in UMD, and perceived health benefit. In ranked order, potential actions we surveyed that might alleviate some of these concerns include: increase chances to learn more about the biobank, increase opportunities to be updated, striving to put community concerns first, including involving community members as leaders of biobank research, and involving community members in decision making. Conclusions: This study identified several attitudes and opinions that influence decisions to join a biobank, including many concerns that could potentially be addressed by engaging community members. We also demonstrate our method of prioritizing ways to improve attitudes and opinions

  16. Availability and Use of HIV Monitoring and Early Infant Diagnosis Technologies in WHO Member States in 2011-2013: Analysis of Annual Surveys at the Facility Level.

    Directory of Open Access Journals (Sweden)

    Vincent Habiyambere

    2016-08-01

    Full Text Available The Joint United Nations Programme on HIV and AIDS (UNAIDS 90-90-90 targets have reinforced the importance of functioning laboratory services to ensure prompt diagnosis and to assess treatment efficacy. We surveyed the availability and utilization of technologies for HIV treatment monitoring and early infant diagnosis (EID in World Health Organization (WHO Member States.The survey questionnaire included 14 structured questions focusing on HIV testing, cluster of differentiation 4 (CD4 testing, HIV viral load (VL testing, and EID and was administered annually from 2012 to 2014 through WHO country offices, with each survey covering the previous 12-mo period. Across 127 targeted countries, survey response rates were 60% in 2012, 67% in 2013, and 78% in 2014. There were encouraging trends towards increased procurement of CD4 and VL/EID instruments in reporting countries. Globally, the capacity of available CD4 instruments was sufficient to meet the demand of all people living with HIV/AIDS (PLWHA, irrespective of treatment status (4.62 theoretical tests per PLWHA in 2013 [median 7.33; interquartile range (IQR 3.44-17.75; median absolute deviation (MAD 4.35]. The capacity of VL instruments was inadequate to cover all PLWHA in many reporting countries (0.44 tests per PLWHA in 2013 [median 0.90; IQR 0.30-2.40; MAD 0.74]. Of concern, only 13.7% of existing CD4 capacity (median 4.3%; IQR 1.1%-12.1%; MAD 3.8% and only 36.5% of existing VL capacity (median 9.4%; IQR 2.3%-28.9%; MAD 8.2% was being utilized across reporting countries in 2013. By the end of 2013, 7.4% of all CD4 instruments (5.8% CD4 conventional instruments and 11.0% of CD4 point of care [POC] and 10% of VL/EID instruments were reportedly not in use because of lack of reagents, the equipment not being installed or deployed, maintenance, and staff training requirements. Major limitations of this survey included under-reporting and/or incomplete reporting in some national programmes and

  17. Numerical estimation of temperature field in a laser welded butt joint made of dissimilar materials

    Directory of Open Access Journals (Sweden)

    Saternus Zbigniew

    2018-01-01

    Full Text Available The paper concerns numerical analysis of thermal phenomena occurring in the butt welding of two different materials by a laser beam welding. The temperature distribution for the welded butt-joint is obtained on the basis of numerical simulations performed in the ABAQUS program. Numerical analysis takes into account the thermophysical properties of welded plate made of two different materials. Temperature distribution in analysed joints is obtained on the basis of numerical simulation in Abaqus/Standard solver, which allowed the determination of the geometry of laser welded butt-joint.

  18. Scaling PatientsLikeMe via a "Generalized Platform" for Members with Chronic Illness: Web-Based Survey Study of Benefits Arising.

    Science.gov (United States)

    Wicks, Paul; Mack Thorley, Eileen; Simacek, Kristina; Curran, Christopher; Emmas, Cathy

    2018-05-07

    Launched in 2006 for patients with amyotrophic lateral sclerosis, PatientsLikeMe is an online community offering patient-reported outcomes, symptom tracking, and social features. Every member of the site can see all the data reported by every other member, view aggregated reports, identify "patients like them," and learn about treatment options in order to live better with their condition. In previous studies, members reported benefits such as improved condition knowledge, increased medication adherence, and better management of side effects. However, the site evolved in 2011 from condition-specific "vertical" communities consisting only of people with the same disease to a "generalized platform," in which every patient could connect with every other patient regardless of condition and with generic, rather than condition-specific, data tools. Some, but not all, communities received further custom tracking tools. We aimed to understand (1) whether members of PatientsLikeMe using the generalized platform still reported similar benefits and (2) assess factors associated with benefits, such as community customization, site use, and patient activation. A cross-sectional retrospective custom survey was fielded to 377,625 members between 2016 and 2017 including the Patient Activation Measure (PAM). A benefit index was developed for comparability across conditions. The invitation was viewed by 26,048 members of whom 11,915 did not respond, 5091 opted out, 1591 provided partial data, and 17 were screened out. Complete responses were received from 7434 participants. Users perceived greatest benefit in understanding how their condition may affect them (4530/6770, 66.91% participants, excluding "does not apply" answers), understanding what might help them live better with their condition (4247/6750, 62.92%), which treatments were available (4143/6898, 60.06%), understanding treatment side effects (4182/6902, 60.59%), and important factors in making treatment decisions (3919

  19. Scaling PatientsLikeMe via a “Generalized Platform” for Members with Chronic Illness: Web-Based Survey Study of Benefits Arising

    Science.gov (United States)

    Mack Thorley, Eileen; Simacek, Kristina; Curran, Christopher; Emmas, Cathy

    2018-01-01

    Background Launched in 2006 for patients with amyotrophic lateral sclerosis, PatientsLikeMe is an online community offering patient-reported outcomes, symptom tracking, and social features. Every member of the site can see all the data reported by every other member, view aggregated reports, identify “patients like them,” and learn about treatment options in order to live better with their condition. In previous studies, members reported benefits such as improved condition knowledge, increased medication adherence, and better management of side effects. However, the site evolved in 2011 from condition-specific “vertical” communities consisting only of people with the same disease to a “generalized platform,” in which every patient could connect with every other patient regardless of condition and with generic, rather than condition-specific, data tools. Some, but not all, communities received further custom tracking tools. Objective We aimed to understand (1) whether members of PatientsLikeMe using the generalized platform still reported similar benefits and (2) assess factors associated with benefits, such as community customization, site use, and patient activation. Methods A cross-sectional retrospective custom survey was fielded to 377,625 members between 2016 and 2017 including the Patient Activation Measure (PAM). A benefit index was developed for comparability across conditions. Results The invitation was viewed by 26,048 members of whom 11,915 did not respond, 5091 opted out, 1591 provided partial data, and 17 were screened out. Complete responses were received from 7434 participants. Users perceived greatest benefit in understanding how their condition may affect them (4530/6770, 66.91% participants, excluding “does not apply” answers), understanding what might help them live better with their condition (4247/6750, 62.92%), which treatments were available (4143/6898, 60.06%), understanding treatment side effects (4182/6902, 60.59%), and

  20. Involvement in and Views on Social Responsibility of Gauteng Members of the South African Society of Physiotherapy: A Cross-sectional Survey

    Directory of Open Access Journals (Sweden)

    K Mostert-Wentzel

    2012-12-01

    Full Text Available How do physiotherapists in Gauteng Province,who are members of the South African Society of Physiotherapy(SASP, view social responsibility?A cross-sectional survey was conducted after ethics approval.All 1 098 Gauteng members of the SASP were invited via a thirdpartye-mail to reach the a priori minimum sample size of 97. Theweb-based questionnaire was developed from literature, an earlierSASP survey and a position paper of the American Physical TherapyAssociation (APTA. Five experts validated the instrument.The Likert scale scores indicating agreement with indicatorsof social responsibility were totalled to form a composite socialresponsibility score. The chi-square test for independence was used to determine associations between the categorisedcomposite social responsibility score and categorical variables. Mean difference of continuous variables betweenthe categorised core for two groups were tested using the two-sample t-test. All variables with a P-value less than0.05 were included in the logistic regression analysis to investigate predictors of the necessity of social responsibility.The survey was completed by 163 participants. Of the sample, 96.9% viewed social responsibility as important.Subjects agreed most with “advocating for the health needs of society” (74,2% and the least with “political activism”(6.1%. Compulsory community service positively influenced 74.6%.Most physiotherapists in the study viewed social responsibility as important and were involved in volunteering.There is scope to broaden the understanding among physiotherapists of what social responsibility entails.

  1. Current practice and perspectives in CRO oversight based on a survey performed among members of the German Association of Research-Based Pharmaceutical Companies (vfa).

    Science.gov (United States)

    Hennig, Michael; Hundt, Ferdinand; Busta, Susanne; Mikus, Stefan; Sanden, Per-Holger; Sörgel, Andrea; Ruppert, Thorsten

    2017-01-01

    In recent years, the number and scope of outsourced activities in the pharmaceutical industry have increased heavily. In addition, also the type of outsourcing has changed significantly in that time. This raises the question of whether and how sponsors retain the capability to select and to control the contract research organizations (CROs) involved and what expertise still has to be present in the development department as well as other relevant departments to ensure adequate oversight, also in line with the expectations of regulators and health authorities. In order to answer these questions, a survey was conducted among the German vfa member companies. The survey describes the latest developments and experiences in outsourcing by 18 German vfa member companies. It concentrates on measures how to implement Quality Assurance (QA) when performing outsourced clinical studies. This study shows that the majority of companies apply a full-outsourcing, preferred-provider model of clinical trial services, with the clinical research department playing the major role in this process. A large amount of guiding documents, processes and tools are used to ensure an adequate oversight of the services performed by the CRO(s). Finally the guiding principles for all oversight processes should be transparent communication, a clearly established expectation for quality, a precise definition of accountability and responsibility while avoiding silo mentality, and a comprehensive documentation of the oversight's evidence. For globally acting and outsourcing sponsors, oversight processes need to be aligned with regards to local and global perspectives. This survey shows that the current implementation of oversight processes in the participating companies covers all relevant areas to ensure highest quality and integrity of the data produced by the outsourced clinical trial.

  2. PSYM-WIDE: A Survey for Large-separation Planetary-mass Companions to Late Spectral Type Members of Young Moving Groups

    Science.gov (United States)

    Naud, Marie-Eve; Artigau, Étienne; Doyon, René; Malo, Lison; Gagné, Jonathan; Lafrenière, David; Wolf, Christian; Magnier, Eugene A.

    2017-09-01

    We present the results of a direct imaging survey for very large separation (>100 au), low-mass companions around 95 nearby young K5-L5 stars and brown dwarfs. They are high-likelihood candidates or confirmed members of the young (≲150 Myr) β Pictoris and AB Doradus moving groups (ABDMG) and the TW Hya, Tucana-Horologium, Columba, Carina, and Argus associations. Images in I\\prime and z\\prime filters were obtained with the Gemini Multi-Object Spectrograph (GMOS) on Gemini South to search for companions down to an apparent magnitude of z\\prime ˜ 22-24 at separations ≳20″ from the targets and in the remainder of the wide 5.‧5 × 5.‧5 GMOS field of view. This allowed us to probe the most distant region where planetary-mass companions could be gravitationally bound to the targets. This region was left largely unstudied by past high-contrast imaging surveys, which probed much closer-in separations. This survey led to the discovery of a planetary-mass (9-13 {M}{Jup}) companion at 2000 au from the M3V star GU Psc, a highly probable member of ABDMG. No other substellar companions were identified. These results allowed us to constrain the frequency of distant planetary-mass companions (5-13 {M}{Jup}) to {0.84}-0.66+6.73% (95% confidence) at semimajor axes between 500 and 5000 au around young K5-L5 stars and brown dwarfs. This is consistent with other studies suggesting that gravitationally bound planetary-mass companions at wide separations from low-mass stars are relatively rare.

  3. Current practice and perspectives in CRO oversight based on a survey performed among members of the German Association of Research-Based Pharmaceutical Companies (vfa

    Directory of Open Access Journals (Sweden)

    Hennig, Michael

    2017-01-01

    Full Text Available In recent years, the number and scope of outsourced activities in the pharmaceutical industry have increased heavily. In addition, also the type of outsourcing has changed significantly in that time. This raises the question of whether and how sponsors retain the capability to select and to control the contract research organizations (CROs involved and what expertise still has to be present in the development department as well as other relevant departments to ensure adequate oversight, also in line with the expectations of regulators and health authorities. In order to answer these questions, a survey was conducted among the German vfa member companies. The survey describes the latest developments and experiences in outsourcing by 18 German vfa member companies. It concentrates on measures how to implement Quality Assurance (QA when performing outsourced clinical studies.This study shows that the majority of companies apply a full-outsourcing, preferred-provider model of clinical trial services, with the clinical research department playing the major role in this process. A large amount of guiding documents, processes and tools are used to ensure an adequate oversight of the services performed by the CRO(s.Finally the guiding principles for all oversight processes should be transparent communication, a clearly established expectation for quality, a precise definition of accountability and responsibility while avoiding silo mentality, and a comprehensive documentation of the oversight’s evidence. For globally acting and outsourcing sponsors, oversight processes need to be aligned with regards to local and global perspectives. This survey shows that the current implementation of oversight processes in the participating companies covers all relevant areas to ensure highest quality and integrity of the data produced by the outsourced clinical trial.

  4. A global survey on occupational health services in selected international commission on occupational health (ICOH) member countries.

    Science.gov (United States)

    Rantanen, Jorma; Lehtinen, Suvi; Valenti, Antonio; Iavicoli, Sergio

    2017-10-05

    The United Nations General Assembly (UNGA), the International Labour Organization (ILO), the World Health Organization (WHO), the International Commission on Occupational Health (ICOH), and the European Union (EU) have encouraged countries to organize occupational health services (OHS) for all working people irrespective of the sector of economy, size of enterprise or mode of employment of the worker. The objective of this study was to survey the status of OHS in a sample of countries from all continents. A questionnaire focusing on the main aspects of OHS was developed on the basis of ILO Convention No. 161 and several other questionnaire surveys used in various target groups of OHS. The questionnaire was sent to 58 key informants: ICOH National Secretaries. A total of 49 National Secretaries responded (response rate 84.5%), from countries that employ 70% of the total world labour force. The majority of the respondent countries, 67%, had drawn up an OHS policy and implement it with the help of national occupational safety and health (OSH) authorities, institutes of occupational health or respective bodies, universities, and professional associations. Multidisciplinary expert OHS resources were available in the majority (82%) of countries, but varied widely in quantitative terms. The average OHS coverage of workers was 24.8%, with wide variation between countries. In over two thirds (69%) of the countries, the content of services was mixed, consisting of preventive and curative services, and in 29% preventive only. OHS financing was organized according to a mixed model among 63% and by employers only among 33% of the respondents. The majority of countries have drawn up policies, strategies and programmes for OHS. The infrastructures and institutional and human resources for the implementation of strategies, however, remain insufficient in the majority of countries (implementation gap). Qualitatively, the content and multidisciplinary nature of OHS corresponds to

  5. Survey of methods of facial palsy documentation in use by members of the Sir Charles Bell Society.

    Science.gov (United States)

    Fattah, Adel Y; Gavilan, Javier; Hadlock, Tessa A; Marcus, Jeffrey R; Marres, Henri; Nduka, Charles; Slattery, William H; Snyder-Warwick, Alison K

    2014-10-01

    Facial palsy manifests a broad array of deficits affecting function, form, and psychological well-being. Assessment scales were introduced to standardize and document the features of facial palsy and to facilitate the exchange of information and comparison of outcomes. The aim of this study was to determine which assessment methodologies are currently employed by those involved in the care of patients with facial palsy as a first step toward the development of consensus on the appropriate assessments for this patient population. Online questionnaire. The Sir Charles Bell Society, a group of professionals dedicated to the care of patients with facial palsy, were surveyed to determine the scales used to document facial nerve function, patient reported outcome measures (PROM), and photographic documentation. Fifty-five percent of the membership responded (n = 83). Grading scales were used by 95%, most commonly the House-Brackmann and Sunnybrook scales. PROMs were used by 58%, typically the Facial Clinimetric Evaluation scale or Facial Disability Index. All used photographic recordings, but variability existed among the facial expressions used. Videography was performed by 82%, and mostly involved the same views as still photography; it was also used to document spontaneous movement and speech. Three-dimensional imaging was employed by 18% of respondents. There exists significant heterogeneity in assessments among clinicians, which impedes straightforward comparisons of outcomes following recovery and intervention. Widespread adoption of structured assessments, including scales, PROMs, photography, and videography, will facilitate communication and comparison among those who study the effects of interventions on this population. © 2014 The American Laryngological, Rhinological and Otological Society, Inc.

  6. Key health promotion factors among male members of staff at a higher educational institution: A cross-sectional postal survey

    Directory of Open Access Journals (Sweden)

    Reid Garth

    2008-02-01

    Full Text Available Abstract Background Men's lifestyles are generally less healthy than women's. This study identifies associations between health-related behaviour in different groups of men working in a Higher Education (HE institution. In addition, men were asked whether they regarded their health-related behaviours as a concern. This article highlights smoking, consumption of alcohol and physical activity as most common men's health-related lifestyle behaviours. Methods A descriptive cross-sectional survey was conducted among all male staff employed by a Higher Education institute in Scotland using a postal self-completed questionnaire. A total of 1,335 questionnaires were distributed and 501 were returned completed (38% return rate. The data were analysed using SPSS 13.0 for Windows. Results Less than 10% currently smoked and almost 44% of these smokers were light smokers. Marital status, job title, consumption of alcohol and physical activity level were the major factors associated with smoking behaviour. Men in manual jobs were far more likely to smoke. Nearly all (90% consumed alcohol, and almost 37% had more than recommended eight units of alcohol per day at least once a week and 16% had more than 21 units weekly. Younger men reported higher amount of units of alcohol on their heaviest day and per week. Approximately 80% were physically active, but less than 40% met the current Government guidelines for moderate physical activity. Most men wanted to increase their activity level. Conclusion There are areas of health-related behaviour, which should be addressed in populations of this kind. Needs assessment could indicate which public health interventions would be most appropriately aimed at this target group. However, the low response rate calls for some caution in interpreting our findings.

  7. 78 FR 21540 - Revisions to the California State Implementation Plan, Butte County Air Quality Management...

    Science.gov (United States)

    2013-04-11

    ... the California State Implementation Plan, Butte County Air Quality Management District and Sacramento Metropolitan Air Quality Management District AGENCY: Environmental Protection Agency (EPA). ACTION: Direct... Quality Management District (BCAQMD) and Sacramento Metropolitan Air Quality Management District (SMAQMD...

  8. California State Implementation Plan; Butte County Air Quality Management District; New Source Review (NSR) Permitting Program

    Science.gov (United States)

    EPA is proposing to approve a revision to the Butte County Air Quality Management District (BCAQMD) portion of the California SIP concerning the District's New Source Review (NSR) permitting program for new and modified sources of air pollution.

  9. Prevalence of the use of cancer related self-tests by members of the public: a community survey

    Directory of Open Access Journals (Sweden)

    Marriott John

    2006-08-01

    Full Text Available Abstract Background Self-tests are those where an individual can obtain a result without recourse to a health professional, by getting a result immediately or by sending a sample to a laboratory that returns the result directly. Self-tests can be diagnostic, for disease monitoring, or both. There are currently tests for more than 20 different conditions available to the UK public, and self-testing is marketed as a way of alerting people to serious health problems so they can seek medical help. Almost nothing is known about the extent to which people self-test for cancer or why they do this. Self-tests for cancer could alter perceptions of risk and health behaviour, cause psychological morbidity and have a significant impact on the demand for healthcare. This study aims to gain an understanding of the frequency of self-testing for cancer and characteristics of users. Methods Cross-sectional survey. Adults registered in participating general practices in the West Midlands Region, will be asked to complete a questionnaire that will collect socio-demographic information and basic data regarding previous and potential future use of self-test kits. The only exclusions will be people who the GP feels it would be inappropriate to send a questionnaire, for example because they are unable to give informed consent. Freepost envelopes will be included and non-responders will receive one reminder. Standardised prevalence rates will be estimated. Discussion Cancer related self-tests, currently available from pharmacies or over the Internet, include faecal occult blood tests (related to bowel cancer, prostate specific antigen tests (related to prostate cancer, breast cancer kits (self examination guide and haematuria tests (related to urinary tract cancers. The effect of an increase in self-testing for cancer is unknown but may be considerable: it may affect the delivery of population based screening programmes; empower patients or cause unnecessary anxiety

  10. Computational Modeling of Microstructural-Evolution in AISI 1005 Steel During Gas Metal Arc Butt Welding

    Science.gov (United States)

    2013-05-01

    H.K.D.H. Bhadeshia, A Model for the Microstruc- ture of Some Advanced Bainitic Steels , Mater. Trans., 1991, 32, p 689–696 19. G.J. Davies and J.G. Garland...REPORT Computational Modeling of Microstructural-Evolution in AISI 1005 Steel During Gas Metal Arc Butt Welding 14. ABSTRACT 16. SECURITY...Computational Modeling of Microstructural-Evolution in AISI 1005 Steel During Gas Metal Arc Butt Welding Report Title ABSTRACT A fully coupled (two-way

  11. The future of nursing: how important is discipline-specific knowledge? A conversation with Jacqueline Fawcett. Interview by Dr. Janie Butts and Dr. Karen Rich.

    Science.gov (United States)

    Fawcett, Jacqueline

    2012-04-01

    Nurses have long attempted to secure a unique identity for the profession. Many scholars are now promoting an interdisciplinary framework for nursing practice. Fawcett is convinced that interdisciplinary practice poses a danger for nursing to lose its identity and that interdisciplinary practice cannot be successful if members of each discipline do not understand the conceptual models, practice, and research of their own discipline. Dr. Janie Butts and Dr. Karen Rich interviewed Dr. Jacqueline Fawcett about her views related to discipline-specific knowledge and nursing's future. The authors conclude that Fawcett's scientific foundation gives nursing the solidarity and power necessary to determine the unique internal goods of its practice.

  12. Attitudes on euthanasia, physician-assisted suicide and terminal sedation--a survey of the members of the German Association for Palliative Medicine.

    Science.gov (United States)

    Müller-Busch, H C; Oduncu, F S; Woskanjan, S; Klaschik, E

    2004-01-01

    Due to recent legislations on euthanasia and its current practice in the Netherlands and Belgium, issues of end-of-life medicine have become very vital in many European countries. In 2002, the Ethics Working Group of the German Association for Palliative Medicine (DGP) has conducted a survey among its physician members in order to evaluate their attitudes towards different end-of-life medical practices, such as euthanasia (EUT), physician-assisted suicide (PAS), and terminal sedation (TS). An anonymous questionnaire was sent to the 411 DGP physicians, consisting of 14 multiple choice questions on positions that might be adopted in different hypothetical scenarios on situations of "intolerable suffering" in end-of-life care. For the sake of clarification, several definitions and legal judgements of different terms used in the German debate on premature termination of life were included. For statistical analysis t-tests and Pearson-correlations were used. The response rate was 61% (n = 251). The proportions of the respondents who were opposed to legalizing different forms of premature termination of life were: 90% opposed to EUT, 75% to PAS, 94% to PAS for psychiatric patients. Terminal sedation was accepted by 94% of the members. The main decisional bases drawn on for the answers were personal ethical values, professional experience with palliative care, knowledge of alternative approaches, knowledge of ethical guidelines and of the national legal frame. In sharp contrast to similar surveys conducted in other countries, only a minority of 9.6% of the DGP physicians supported the legalization of EUT. The misuse of medical knowledge for inhumane killing in the Nazi period did not play a relevant role for the respondents' negative attitude towards EUT. Palliative care needs to be stronger established and promoted within the German health care system in order to improve the quality of end-of-life situations which subsequently is expected to lead to decreasing requests

  13. Current UK practice of pediatric supraglottic airway devices - a survey of members of the Association of Paediatric Anaesthetists of Great Britain and Ireland.

    Science.gov (United States)

    Bradley, Anthony E D; White, Michelle C; Engelhardt, Thomas; Bayley, Guy; Beringer, Richard M

    2013-11-01

    Over half of general anesthetics in the UK involve supraglottic airway devices (SADs). The National Audit Project 4 undertaken by the Royal College of Anaesthetists demonstrated that aspiration was the most frequent complication relating to SAD use. SADs designed to reduce this risk (second-generation devices) are increasingly recommended in both adults and children. As well as routine use, SADs are recommended for use in cases of 'difficult airway'. This survey assessed current usage of SADs in routine practice and difficult airways. Sixteen questions, approved by the Association of Paediatric Anaesthetists of Great Britain and Ireland (APAGBI) survey committee, were distributed to all its members. Two hundred and forty-four members responded. Eighty-eight percent preferentially use first-generation rather than second-generation devices. The most important design feature was the availability of a complete range of sizes (84%). Seventy-seven percent felt that randomized controlled trials assessing SAD safety in children are needed. In cases of failed intubation, classically shaped SADs are preferred (79%). Three percent of responders intubate via an SAD routinely. Eighteen percent have employed this technique in an emergency. Thirty-six percent of responders have found an SAD to function poorly. Pediatric anesthesiologists appear slow to embrace second-generation SADs. The role of SADs in the management of difficult airways is widely accepted. Research currently has little influence over the choice of which SAD to use, which is more likely determined by personal choice and departmental preference. There is a risk that some SADs are unsafe. © 2013 John Wiley & Sons Ltd.

  14. Are lung imaging reporting and data system categories clear to radiologists? A survey of the Korean Society of Thoracic Radiology members on ten difficult -to classify scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Han, Dae Hee; Ahn, Myeong Im [Dept. of Radiology, Seoul St. Mary' s Hospital, College of Medicine, The Catholic University of Korea, Seoul (Korea, Republic of); Goo, Jin Mo [Dept. of Radiology, Seoul National University College of Medicine, Institute of Radiation Medicine, Seoul National University Medical Research Center, Seoul (Korea, Republic of); Chong, Se Min [Dept. of Radiology, Chung-Ang University Hospital, Chung-Ang University College of Medicine, Seoul (Korea, Republic of)

    2017-04-15

    To evaluate possible variability in chest radiologists' interpretations of the Lung Imaging Reporting and Data System (Lung-RADS) on difficult-to-classify scenarios. Ten scenarios of difficult-to-classify imaginary lung nodules were prepared as an online survey that targeted Korean Society of Thoracic Radiology members. In each question, a description was provided of the size, consistency, and interval change (new or growing) of a lung nodule observed using annual repeat computed tomography, and the respondent was instructed to choose one answer from five choices: category 2, 3, 4A, or 4B, or 'un-categorizable.' Consensus answers were established by members of the Korean Imaging Study Group for Lung Cancer. Of the 420 answers from 42 respondents (excluding multiple submissions), 310 (73.8%) agreed with the consensus answers; eleven (26.2%) respondents agreed with the consensus answers to six or fewer questions. Assigning the imaginary nodules to categories higher than the consensus answer was more frequent (16.0%) than assigning them to lower categories (5.5%), and the agreement rate was below 50% for two scenarios. When given difficult-to-classify scenarios, chest radiologists showed large variability in their interpretations of the Lung-RADS categories, with high frequencies of disagreement in some specific scenarios.

  15. A survey on the effects of institutional ownership, internal audit and non-executive board members on forecasting crashes: Evidence from Tehran Stock Exchange

    Directory of Open Access Journals (Sweden)

    Mostafa Sohouli Vahed

    2014-11-01

    Full Text Available This paper presents an empirical investigation to study the effects of institutional ownership, internal audit system, the number of non-executive board members and having differentiation between chair and general managers’ responsibilities on the likelihood of stock price crash on 110 listed firms on Tehran Stock Exchange over the period 2004-2011. The study uses Chen’ model (2001 [Chen, J., Hong, H., & Stein, J. C. (2001. Forecasting crashes: Trading volume, past returns, and conditional skewness in stock prices. Journal of Financial Economics, 61(3, 345-381.] to perform the investigation. Based on the results of the survey, there is a negative and meaningful relationship between stock price crash and institutional ownership when the level of significance is ten percent. In addition, as the number of non-executive board members increases, the chance of stock price crash decreases when the level of significance is five percent. However, separation between the responsibility of chair and general managers did not seem to influence on stock price and also having internal audit system had no impact on the likelihood of stock price change.

  16. Application of Phased Array Ultrasonic Testing (PAUT) on Single V-Butt Weld Integrity Determination

    International Nuclear Information System (INIS)

    Amry Amin Abas; Mohd Kamal Shah Shamsudin; Norhazleena Azaman

    2015-01-01

    Phased Array Ultrasonic Testing (PAUT) utilizes arrays of piezoelectric elements that are embedded in an epoxy base. The benefit of having such kind of array is that beam forming such as steering and focusing the beam front possible. This enables scanning patterns such as linear scan, sectorial scan and depth focusing scan to be performed. Ultrasonic phased array systems can potentially be employed in almost any test where conventional ultrasonic flaw detectors have traditionally been used. Weld inspection and crack detection are the most important applications, and these tests are done across a wide range of industries including aerospace, power generation, petrochemical, metal billet and tubular goods suppliers, pipeline construction and maintenance, structural metals, and general manufacturing. Phased arrays can also be effectively used to profile remaining wall thickness in corrosion survey applications. The benefits of PAUT are simplifying inspection of components of complex geometry, inspection of components with limited access, testing of welds with multiple angles from a single probe and increasing the probability of detection while improving signal-to-noise ratio. This paper compares the result of inspection on several specimens using PAUT as to digital radiography. The specimens are welded plates with single V-butt weld made of carbon steel. Digital radiography is done using blue imaging plate with x-ray source. PAUT is done using Olympus MX2 with 5 MHz probe consisting of 64 elements. The location, size and length of defect is compared. (author)

  17. Critical Gap distance in Laser Butt-welding

    DEFF Research Database (Denmark)

    Bagger, Claus; Olsen, Flemming Ove

    1999-01-01

    In a number of systematic laboratory experiments the critical gap distance that results in sound beads in laser butt welding is sought identified. By grinding the edges of the sheets, a number of "reference" welds are made and compared to the sheets with shear cut edges. In the tests the gap...... was set at 0.00, 0.02, 0.05, 0.08 and 0.10 mm. Mild steel (St 1203) with a thickness of 0.75 and 1.25 mm with and without zinc coating were analysed. A total of 120 welds were made at different welding speeds.As quality norm DIN 8563 was used to divide the welds into quality classes. A number of welds...... were also x-ray photographed.Of the weld combinations analysed 80 % were of high quality and 17 % of a non-acceptable quality. 90 % of the bad welds had a gap distance larger than 0.05 mm. The results showed that 85 % of the bad welds were shear cut and only 15 % grinded. Two third of the bad welds...

  18. Critical Gap distance in Laser Butt-welding

    DEFF Research Database (Denmark)

    Bagger, Claus; Olsen, Flemming Ove

    of "reference" welds are made and compared to sheets with the edges shear cut. The gap distance is precisely controlled by inserting spacers between the sheets. In the tests the gap is set at 0.00, 0.02, 0.05, 0.08 and 0.10 mm. Mild steel (St 1203) with thickness? of 0.75 and 1.25 mm with and without zinc......When butt-welding metal sheets with high power lasers the gap distance between the sheets determine the final quality of the seam. In a number of systematic laboratory experiments the critical gap distance that results in sound beads is identified. By grinding the edges of the sheets, a number...... coating were analysed. A total of 120 welds are made at different welding speeds.As quality norm DIN 8563 is used to divide the welds into quality classes. Since this norm only deals with surface defects a number of welds are also x-ray photographed.According to DIN 8563 the welds have classes of either B...

  19. Residual-stress distributions near stainless steel butt weldments

    International Nuclear Information System (INIS)

    Elligson, W.A.; Shack, W.J.

    1978-01-01

    Concern for the integrity of stainless steel butt-weldments in boiling-water-reactor (BWR) piping systems has stimulated study of the conditions that cause stress corrosion cracking (SCC) in the heat-affected zones (HAZ) of the weldments. It is generally agreed that a high stress exceeding the initial yield strength is one of the essential elements for crack initiation. Since design procedures usually ensure that load stresses are below initial yield, the source of the high stresses necessary to produce SCC is thought to be the residual stresses due to welding. To examine the level of residual stresses in the weldments of interest, bulk residual stresses were measured on 100 mm (4-in.) and 254 mm (10-in.) diameter Schedule 80 piping weldments using strain relief techniques. Both laboratory welded specimens and field welded specimens from reactors in service were studied. Axial bulk residual stress distributions were obtained at 45 0 intervals around the circumference. At each azimuthal position, the residual stresses were measured at seven axial positions: on the weld centerline and 13, 20, and 25 mm on either side of the weld centerline on both the inside and outside surfaces

  20. Tobacco industry responsibility for butts: a Model Tobacco Waste Act.

    Science.gov (United States)

    Curtis, Clifton; Novotny, Thomas E; Lee, Kelley; Freiberg, Mike; McLaughlin, Ian

    2017-01-01

    Cigarette butts and other postconsumer products from tobacco use are the most common waste elements picked up worldwide each year during environmental cleanups. Under the environmental principle of Extended Producer Responsibility, tobacco product manufacturers may be held responsible for collection, transport, processing and safe disposal of tobacco product waste (TPW). Legislation has been applied to other toxic and hazardous postconsumer waste products such as paints, pesticide containers and unused pharmaceuticals, to reduce, prevent and mitigate their environmental impacts. Additional product stewardship (PS) requirements may be necessary for other stakeholders and beneficiaries of tobacco product sales and use, especially suppliers, retailers and consumers, in order to ensure effective TPW reduction. This report describes how a Model Tobacco Waste Act may be adopted by national and subnational jurisdictions to address the environmental impacts of TPW. Such a law will also reduce tobacco use and its health consequences by raising attention to the environmental hazards of TPW, increasing the price of tobacco products, and reducing the number of tobacco product retailers. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  1. Indications for surgical stabilization of rib fractures in patients without flail chest: surveyed opinions of members of the Chest Wall Injury Society.

    Science.gov (United States)

    Pieracci, Fredric M; Agarwal, Suresh; Doben, Andrew; Shiroff, Adam; Lottenberg, Larwence; Whitbeck, Sarah Ann; White, Thomas W

    2018-02-01

    There are currently no evidence-based indications for surgical stabilization of rib fractures (SSRF) in patients without flail chest. The purpose of this survey was to identify patients for whom there is relative equipoise (operative vs. non-operative) in order to assist in designing a randomized clinical trial. Members of the Chest Wall Injury Society were sent an online survey, in which 18 patient scenarios were presented. The baseline patient had ≥ three displaced, contiguous fractures and had no other contraindications for surgery. This default scenario was then varied based upon patient age, degree of traumatic brain injury (TBI), fracture series location, and number of abnormal pulmonary physiologic variables (oxygen requirement, respiratory rate, incentive spirometry ability, cough, and numeric pain score). Thirty respondents provided a total of 540 answers. Overall, the majority of responses were in favor of SSRF (n = 413, 84.1%). Furthermore, the vast majority of responses indicated that some degree of pulmonary compromise was necessary to recommend SSRF (n = 44, 90.4%), with ≥ two abnormal parameters being the most common threshold (n = 156, 31.8%). Decision to recommend SSRF varied significantly by number of abnormal clinical variables, age, and degree of TBI, but not by fracture series location. Patients aged 85 years old and those with moderate TBI were the least likely to be recommended for SSRF, regardless of abnormal pulmonary physiologic variables. The most appropriate cutoff for equipoise appeared to be a patient aged 21-79 years old, with no or mild TBI, ≥ two abnormal pulmonary parameters, and regardless of fracture location (44.8% consensus for SSRF). SSRF was recommended for most patients with non-flail, displaced rib fractures. However, this recommendation was contingent upon patient age, degree of TBI, and pulmonary clinical status. Results of this survey may be used to inform inclusion criteria for a future randomized

  2. Discrimination and support from friends and family members experienced by people with mental health problems: findings from an Australian national survey.

    Science.gov (United States)

    Morgan, Amy J; Reavley, N J; Jorm, A F; Beatson, R

    2017-11-01

    To investigate the scope and nature of discrimination and positive treatment experienced by adults with mental health problems from their friends and family in a population-based survey. An Australian telephone-survey of 5220 adults included 1381 individuals who reported a mental health problem or scored high on a screening questionnaire. Respondents were interviewed about their experience of discrimination and positive treatment from their friends, spouse and other family members. Descriptions of experiences were content-analysed to identify key characteristics. Mental health diagnoses were primarily depression or anxiety disorders, and just over half had received treatment in the last 12 months. Positive treatment from family and friends was far more common than discrimination, reported by 74.1% of respondents. This was primarily characterised by providing emotional support and maintaining contact, as well as checking on their mental health and being a good listener. Nevertheless, discriminatory behaviours from friends and family were reported by 25.8% of respondents, with reducing or cutting contact being by far the most common. Friends and family also commonly dismissed that mental illness was real or caused suffering and showed a lack of understanding about mental health problems or treatments and how they can impact behaviour and functioning. This nationally representative study of real life experiences highlights the potential for harm or benefit from a person's social support network. Despite positive experiences being common, there is an ongoing need to reduce mental illness stigma and improve understanding of how to support a loved one with a mental health problem.

  3. E-survey with researchers, members of ethics committees and sponsors of clinical research in Brazil: an emerging methodology for scientific research.

    Science.gov (United States)

    Dainesi, Sonia Mansoldo; Goldbaum, Moisés

    2012-12-01

    The growth of Internet users enables epidemiological studies to be conducted electronically, representing a promising methodology for data collection. Members of Ethics Committees, Clinical Researchers and Sponsors were interviewed using questionnaires sent over the Internet. Along with the questionnaire, participants received a message explaining the survey and also the informed consent. Returning the questionnaire meant the consent of the participant was given. No incentive was offered; two reminders were sent. The response rate was 21% (124/599), 20% (58/290) and 45% (24/53) respectively for Ethics Committees, Researchers and Sponsors. The percentage of return before the two reminders was about 62%. Reasons for non-response: participant not found, refusal to participate, lack of experience in clinical research or in the therapeutic field. Characteristics of participants: 45% of Ethics Committee participants, 64% of Researchers and 63% of Sponsors were male; mean age (range), respectively: 47 (28-74), 53 (24-72) and 40 (29-65) years. Among Researchers and Sponsors, all respondents had at least a university degree and, in the Ethics Committees group, only two (1.7%) did not have one. Most of the questionnaires in all groups came from the Southeast Region of Brazil, probably reflecting the highest number of clinical trials and research professionals in this region. Despite the potential limitations of a survey done through the Internet, this study led to a response rate similar to what has been observed with other models, efficiency in obtaining responses (speed and quality), convenience for respondents and low cost.

  4. Microstructure and mechanical performance of autogenously fibre laser beam welded Ti-6242 butt joints

    Energy Technology Data Exchange (ETDEWEB)

    Kashaev, Nikolai, E-mail: nikolai.kashaev@hzg.de; Pugachev, Dmitry; Ventzke, Volker; Fomin, Fedor; Burkhardt, Irmela; Enz, Josephin; Riekehr, Stefan

    2017-05-10

    This work deals with the effects of laser beam power, focus position and advance speed on the geometry, microstructure and mechanical properties such as the tensile strength and microhardness of autogenously fibre laser beam welded Ti-6Al-2Sn-4Zr-2Mo (denoted as Ti-6242) butt joints used for high temperature applications. The Ti-6242 sheet employed here is characterized by a globular (α+β) microstructure. Laser beam welded butt joints consisted of a martensitic fusion zone, inhomogeneous heat affected zones and equiaxed base materials. The microhardness increased from 330 HV 0.3 in base material to 430 HV 0.3 in fusion zone due to the martensitic transformation. Butt joints showed the base material level of strength in tensile test. The local increase in microhardness provided a shielding effect that protected the Ti-6242 butt joint against mechanical damage during the static tensile load test. The predicted critical total underfill depth that does not reduce the tensile strength of the weld was determined to be 25% of the specimen thickness. - Highlights: • Autogenous fibre LBW of Ti-6242 was successfully achieved. • Butt joints showed low levels of porosity and an appropriate seam geometry. • Base material level of strength achieved for tensile strength. • Predicted critical underfill depth is 25% of the specimen thickness.

  5. Influence of Magnetic Resonance Imaging Features on Surgical Decision-Making in Degenerative Cervical Myelopathy: Results from a Global Survey of AOSpine International Members.

    Science.gov (United States)

    Nouri, Aria; Martin, Allan R; Nater, Anick; Witiw, Christopher D; Kato, So; Tetreault, Lindsay; Reihani-Kermani, Hamed; Santaguida, Carlo; Fehlings, Michael G

    2017-09-01

    We conducted a survey to understand how specific pathologic features on magnetic resonance imaging (MRI) influence surgeons toward an anterior or posterior surgical approach in degenerative cervical myelopathy (DCM). A questionnaire was sent out to 6179 AOSpine International members via e-mail. This included 18 questions on a 7-point Likert scale regarding how MRI features influence the respondent's decision to perform an anterior or posterior surgical approach. Influence was classified based on the mean and mode. Variations in responses were assessed by region and training. Of 513 respondents, 51.7% were orthopedic surgeons, 36.8% were neurosurgeons, and the remainder were fellows, residents, or other. In ascending order, multilevel bulging disks, cervical kyphosis, and a high degree of anterior cord compression had a moderate to strong influence toward an anterior approach. A high degree of posterior cord compression had a moderate to strong influence, whereas multilevel compression, ossification of the posterior longitudinal ligament, ligamentum flavum enlargement, and congenital stenosis had a moderate influence toward a posterior approach. Neurosurgeons chose anterior approaches more and posterior approaches less in comparison with orthopedic surgeons (P influences the choice for anterior or posterior surgical approach. These data highlight factors based on surgeon experience, training, and region of practice. They will be helpful in defining future areas of investigation in an effort to provide individualized surgical strategies and optimize patient outcomes. Copyright © 2017 Elsevier Inc. All rights reserved.

  6. Correlations between Poor Micronutrition in Family Members and Potential Risk Factors for Poor Diet in Children and Adolescents Using Korean National Health and Nutrition Examination Survey Data

    Directory of Open Access Journals (Sweden)

    Hye Ah Lee

    2015-08-01

    Full Text Available Based on data from the 2010–2011 Korean National Health and Nutrition Examination Survey, we investigated correlations between micronutrients in the diet of family members and the possible risk factors for children and adolescents consuming an inadequate diet. We examined two-generation households with children aged 2–18 years. The quality of the family diet with regard to the following nine nutrients (protein, calcium, phosphorous, iron, vitamin A, vitamin B1, vitamin B2, niacin, and vitamin C was assessed based on the Index of Nutritional Quality. Correlations between quality of diet and selected variables were analyzed using the Statistical Analysis for Genetic Epidemiology software, and those between diet quality and potential risk factors for poor diet in offspring were analyzed using multinomial logistic regression. Overall, calcium was the most commonly under-consumed micronutrient. More than half of sons and daughters showed insufficient vitamin A, vitamin C, and iron intake, and both mothers and fathers showed insufficiency with respect to vitamin A, vitamin B2, and vitamin C. The correlation between a poor diet in parents and that in offspring was 0.17 (p < 0.0001, and this correlation coefficient was higher between mothers and offspring than between fathers and offspring. Additionally, eating breakfast provided a significant protective effect against the risk of poor nutrition in offspring, even after adjusting for covariates. Our results add to evidence indicating that children should be encouraged to eat breakfast to improve the quality of their diet.

  7. Geology of Pine and Crater Buttes: two basaltic constructs on the far eastern Snake River Plain

    International Nuclear Information System (INIS)

    Mazierski, P.F.; King, J.S.

    1987-01-01

    The emplacement history and petrochemical evolution of the volcanics associated with Pine Butte, Crater Butte, and other nearby vents are developed and described. Four major vents were identified in the study area and their associated eruptive products were mapped. All of the vents show a marked physical elongation or linear orientation coincident with the observed rift set. Planetary exploration has revealed the importance of volcanic processes in the genesis and modification of extraterrestrial surfaces. Interpretation of surface features has identified plains-type basaltic volcanism in various mare regions of the Moon and the volcanic provinces of Mars. Identification of these areas with features that appear analogous to those observed in the Pine Butte area suggests similar styles of eruption and mode of emplacement. Such terrestrial analogies serve as a method to interpret the evolution of volcanic planetary surfaces on the inner planets

  8. Optimization and Prediction of Angular Distortion and Weldment Characteristics of TIG Square Butt Joints

    Science.gov (United States)

    Narang, H. K.; Mahapatra, M. M.; Jha, P. K.; Biswas, P.

    2014-05-01

    Autogenous arc welds with minimum upper weld bead depression and lower weld bead bulging are desired as such welds do not require a second welding pass for filling up the upper bead depressions (UBDs) and characterized with minimum angular distortion. The present paper describes optimization and prediction of angular distortion and weldment characteristics such as upper weld bead depression and lower weld bead bulging of TIG-welded structural steel square butt joints. Full factorial design of experiment was utilized for selecting the combinations of welding process parameter to produce the square butts. A mathematical model was developed to establish the relationship between TIG welding process parameters and responses such as upper bead width, lower bead width, UBD, lower bead height (bulging), weld cross-sectional area, and angular distortions. The optimal welding condition to minimize UBD and lower bead bulging of the TIG butt joints was identified.

  9. 75 FR 60804 - Notice of Availability of the Final Environmental Impact Statement for the West Butte Wind Power...

    Science.gov (United States)

    2010-10-01

    ... Wind Power Right-of-Way, Crook and Deschutes Counties, OR AGENCY: Bureau of Land Management, Interior... Final Environmental Impact Statement (EIS) for the West Butte Wind Power Right-of-Way and by this Notice... Register notice. FOR FURTHER INFORMATION CONTACT: Steve Storo, BLM West Butte Wind Power Right of Way...

  10. 77 FR 61020 - Notice of Availability of Final Environmental Impact Statement for the Sigurd to Red Butte No. 2...

    Science.gov (United States)

    2012-10-05

    ...; UTU-83067] Notice of Availability of Final Environmental Impact Statement for the Sigurd to Red Butte... (BLM) has prepared a Final Environmental Impact Statement (EIS) for the Sigurd to Red Butte No. 2--345...; Utah School and Institutional Trust Lands Administration; Millard, Sevier, Beaver, Iron, and Washington...

  11. 77 FR 10773 - Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines; Scheduling of...

    Science.gov (United States)

    2012-02-23

    ... Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines; Scheduling of Expedited Five-Year... orders on stainless steel butt-weld pipe fittings from Italy, Malaysia, and the Philippines would be... certificate of service. Determination.--The Commission has determined to exercise its authority to extend the...

  12. 76 FR 67146 - Stainless Steel Butt-Weld Pipe Fittings From Italy; Extension of Time Limit for Preliminary...

    Science.gov (United States)

    2011-10-31

    ... DEPARTMENT OF COMMERCE International Trade Administration [A-475-828] Stainless Steel Butt-Weld... antidumping duty order on stainless steel butt-weld pipe fittings from Italy in the Federal Register. See... preliminary results of this review within the original time frame because it needs to obtain additional...

  13. A parametric study of residual stresses in multipass butt-welded stainless steel pipes

    Energy Technology Data Exchange (ETDEWEB)

    Brickstad, B. [SAQ Inspection Ltd., Stockholm (Sweden); Josefson, L. [Chalmers Univ. of Technology, Goeteborg (Sweden). Div. of Solid Mechanics

    1996-06-01

    Multipass circumferential butt-welding of stainless steel pipes is simulated numerically in a non-linear thermo-mechanical FE-analysis. In particular, the through-thickness variation at the weld and heat affected zone, of the axial and hoop stresses and their sensitivity to variation in weld parameters are studied. Recommendations are given for the through thickness variation of the axial and hoop stresses to be used when assessing the growth of surface flaws at circumferential butt welds in nuclear piping system. 31 refs, 12 tabs, 54 figs.

  14. Et cigaretskod, en donation, en renere by: A cigarette butt, a donation, a cleaner city

    OpenAIRE

    Bengtsen, Monica; Patursson, Guttormur; Nedergaard, Sofie Tarpø; Madsen, Maria Chas; Drews, Anna Ørsted; Bach, Katrine Møller

    2013-01-01

    This project concerns an explanation of the problem of cigarette butts lying in the streets of Copenhagen. By using elements of the theory of nudging we have designed an ashtray ment to pledge smokers not to throw their butt in the streets. The design is a response to a design competition published by the municipality of Copenhagen, as an attempt to be the cleanest capital in Europe by the year 2015. The core of the design presentation is in cooperation with private firms, who have obligated ...

  15. Analysis and Prediction of the Billet Butt and Transverse Weld in the Continuous Extrusion Process of a Hollow Aluminum Profile

    Science.gov (United States)

    Lou, Shumei; Wang, Yongxiao; Liu, Chuanxi; Lu, Shuai; Liu, Sujun; Su, Chunjian

    2017-08-01

    In continuous extrusions of aluminum profiles, the thickness of the billet butt and the length of the discarded extrudate containing the transverse weld play key roles in reducing material loss and improving product quality. The formation and final distribution of the billet butt and transverse weld depend entirely on the flow behavior of the billet skin material. This study examined the flow behavior of the billet skin material as well as the formation and evolution of the billet butt and the transverse weld in detail through numerical simulation and a series of experiments. In practical extrusions, even if the billet skin is removed by lathe turning shortly before extrusion, billet skin impurities are still distributed around the transverse weld and in the billet butt. The thickness of the scrap billet butt and the length of the discarded extrudate containing the transverse weld can be exactly predicted via simulation.

  16. Impact of Pathologist Involvement in Sarcoma and Rare Tumor Patient Support Groups on Facebook: A Survey of 542 Patients and Family Members.

    Science.gov (United States)

    Haller, Jasmine; David, Marjorie Parker; Lee, Nathan E; Shalin, Sara C; Gardner, Jerad M

    2018-01-29

    - Patients with rare tumors have difficulty finding reliable information about their disease. Facebook patient support groups allow patients to educate one another. - To investigate how these patients perceive the value of pathologists, both in Facebook groups and real-world patient care. - Survey links were posted in 12 Facebook patient groups: 6 with an active pathologist member (angiosarcoma, epithelioid hemangioendothelioma, epithelioid sarcoma, dermatofibrosarcoma protuberans [×2], and desmoid fibromatosis), and 6 without "active" pathologist involvement (aggressive angiomyxoma, chondrosarcoma, Ewing sarcoma, leiomyosarcoma, liposarcoma, and osteosarcoma). - A total of 542 people responded (403 were patients): 264 from groups with a pathologist, and 278 from groups without active pathologist involvement. Of groups with an active pathologist, respondents agreed the pathologist's posts helped them better understand their disease (107 of 119; 90%) and relieved some of their disease-related anxiety (92 of 119; 77%). And for these groups 98% (117 of 119) of respondents agreed that having a pathologist in their group was a good thing; 83% (192 of 232) wanted more pathologists involved. More respondents from groups with an active pathologist (219 of 236; 93%) than without one (215 of 252; 85%) agreed: "pathologists are an important part of the patient care team for patients with cancer and other rare tumors" ( P = .008). - This study is the first to evaluate the impact of pathologist interaction with Facebook patient support groups and to assess perceptions about the specialty of pathology from a large group of patients with rare tumors. Pathologist involvement in Facebook patient groups appears to positively influence patient perception of the importance of pathologists. We hope these data will encourage more pathologists to participate in Facebook patient support groups.

  17. 76 FR 43341 - Notice of Availability of the Record of Decision for the West Butte Wind Power Right-of-Way...

    Science.gov (United States)

    2011-07-20

    ... LVRWH09H0600; HAG 10-0338] Notice of Availability of the Record of Decision for the West Butte Wind Power Right... INFORMATION CONTACT: Steve Storo, BLM West Butte Wind Power Right-of-Way Project Lead: telephone (541) 416... INFORMATION: The applicant, West Butte Wind Power, LLC, filed right-of-way (ROW) application OR-065784 to...

  18. Modeling and control of a DC upset resistance butt welding process

    NARCIS (Netherlands)

    Naus, G.J.L.; Meulenberg, R.; Molengraft, van de M.J.G.

    2007-01-01

    This paper presents the analysis and synthesis of modeling and control of the DC upset resistance butt welding process used in rim production lines. A new control strategy is developed, enabling active control of the welding seam temperature and the upset size. As a result, set-up times and energy

  19. Gap Width Study and Fixture Design in Laser Butt-Welding

    DEFF Research Database (Denmark)

    Gong, Hui; Olsen, Flemming Ove

    .5-2.0 m/min, the laser power : 2 and 2.6 kW and the focal point position : 0 and -1.2 mm. Quality of all the butt welds are destructively tested according to ISO 13919-1.Influences of the variable process parameters to the maximum allowable gap width are observed as (1) the maximum gap width is inversely......This paper discusses some practical consideration for design of a mechanical fixture, which enables to accurately measure the width of a gap between two stainless steel workpieces and to steadfastly clamp the workpieces for butt-welding with a high power CO2 laser.With such a fixture, a series...... of butt-welding experiment is successfully carried out in order to find the maximum allowable gap width in laser butt-welding. The gap width study (GWS) is performed on the material of SST of W1.4401 (AISI 316) under various welding conditions, which are the gap width : 0.00-0.50 mm, the welding speed : 0...

  20. TIG-dressing of High Strength Butt Welded Connection. Part 2 : Physical Testing and Modelling

    NARCIS (Netherlands)

    Van Es, S.H.J.; Kolstein, M.H.; Pijpers, R.J.M.; Bijlaard, F.S.K.

    2014-01-01

    Weld improvement techniques are aimed at reducing the notch effects of welds and generally focus on two aspects: a change of geometry of the weld toe and a change of the weld residual stresses. In this paper, fatigue tests are discussed, performed on butt welded specimens in steel grades ranging

  1. TIG-dressing of high strength butt welded connection - Part 2: physical testing and modelling

    NARCIS (Netherlands)

    Es, S.H.J. van; Kolstein, M.H.; Pijpers, R.J.M.; Bijlaard, F.S.K.

    2013-01-01

    Weld improvement techniques are aimed at reducing the notch effects of welds and generally focus on two aspects: a change of geometry of the weld toe and a change of the weld residual stresses. In this paper, fatigue tests are discussed, performed on butt welded specimens in steel grades ranging

  2. Characterizing butt-rot fungi on USA-affiliated islands in the western Pacific

    Science.gov (United States)

    Phil Cannon; Ned B. Klopfenstein; Robert L. Schlub; Mee-Sook Kim; Yuko Ota; Norio Sahashi; Roland J. Quitugua; John W. Hanna; Amy L. Ross-Davis; J. D. Sweeney

    2014-01-01

    Ganoderma and Phellinus are genera that commonly cause tree butt-rot on USA-affiliated islands of the western Pacific. These fungal genera can be quite prevalent, especially in older mangrove stands. Although the majority of infections caused by these fungi lead to severe rotting of the heartwood, they typically do not directly kill the living tissues of the sapwood,...

  3. Ultrasonic wave propagation in real-life austenitic V-butt welds: Numerical modeling and validation

    International Nuclear Information System (INIS)

    Hannemann, R.; Marklein, R.; Langenberg, K. J.; Schurig, C.; Koehler, B.; Walte, F.

    2000-01-01

    In nondestructive testing the evaluation of austenitic steel welds with ultrasound is a commonly used method. But, since the wave propagation, scattering, and diffraction effects in such complicated media are hardly understood, computer simulations are very helpful to increase the knowledge of the physical phenomena in such samples. A particularly powerful numerical time domain modeling tool is the well established Elastodynamic Finite Integration Technique (EFIT). Recently, EFIT has been extended to simulate elastic waves in inhomogeneous anisotropic media. In this paper, the step-by-step evaluation of ultrasonic wave propagation in inhomogeneous anisotropic media will be described and the results will be validated against measurements. As a simplified model, a V-butt weld with perpendicular grain structure is investigated. The coincidence between the B Scans of the simulation and the measurement of an idealized V-butt weld is remarkable and even effects predicted by theory and simulation - the appearance of two coupled quasi-SV waves - can be observed. As a next step, an improved and more realistic model of the grain orientation inside the V-butt weld is introduced. This model has been implemented in the EFIT code and has been validated against measurements. For this verification, measured and simulated B-Scans for a real-life V-butt weld have been compared and a significant coincidence has been observed. Furthermore, the main pulses in the B-Scans are interpreted by analyzing the snapshot-movies of the wavefronts

  4. 77 FR 13072 - Salmon-Challis National Forest, Butte, Custer and Lemhi Counties, ID, Supplemental Environmental...

    Science.gov (United States)

    2012-03-05

    ... DEPARTMENT OF AGRICULTURE Forest Service Salmon-Challis National Forest, Butte, Custer and Lemhi Counties, ID, Supplemental Environmental Impact Statement to the 2009 Salmon- Challis National Forest... of intent to prepare a supplemental environmental impact statement. SUMMARY: The Salmon-Challis...

  5. Geology of the Pumpkin Buttes Area of the Powder River Basin, Campbell and Johnson Counties, Wyoming

    Science.gov (United States)

    Sharp, William Neil; White, Amos McNairy

    1956-01-01

    About 200 uranium occurrences have been examined in the Pumpkin Buttes area, Wyoming. Uranium minerals are visible at most of these places and occur in red and buff sandstone lenses in the Wasatch formation of Eocene age. The uranium minerals are disseminated in buff sandstone near red sandstone, and also occur in red sandstone in manganese oxide concretions and uraninite concretions.

  6. A study of fatigue life distribution of butt-welded joints

    International Nuclear Information System (INIS)

    Sakai, Tatsuo; Fujitani, Keizo; Kikuchi, Toshiro; Tanaka, Takao.

    1981-01-01

    Various kinds of welded joints are being used in many structures such as ships, bridges and constructions. It is important in reliability analysis of such structures to clarify the statistical fatigue property of the welded joints. In this study, fatigue tests were carried out on the butt-welded joints of SM50A steel and a theoretical interpretation on the fatigue life distribution was attempted, assuming that a butt-welded joint is composed of a number of sliced specimens with different fatigue strengths. Main results obtained are summarized as follows; (1) The median crack initiation life of the butt-welded joint specimens coincided with that of the sliced specimens, when the crack initiation was defined by a 0.2 mm crack in the sliced specimens or the equivalent state of stress intensity factor in the joint specimens. (2) The distribution of crack initiation lives of the butt-welded joints can be theoretically derived by combining the concept of extreme distribution and the distribution model on the number of fatigue cracks. The theoretical distribution of crack initiation lives of the joints is in good agreement with the general trend of the experimental results. (3) If the distribution of crack initiation lives and the crack growth law are given experimentally, one can obtain analytically the distribution of final fatigue lives. The fatigue life distribution of the sliced specimens can be explained by the theory established in this study. (author)

  7. Teacher's Guide to Architectural Styles. Skinner's Butte Historical District. Revised Edition.

    Science.gov (United States)

    Bauer, Mary; Neimand, Hahn

    This document is a teacher's guide to the historic buildings of Eugene, Oregon. Eighteen buildings in the Skinner's Butte Historical District are highlighted, including the U.S. Post Office, the Eagles Building, the Lane Hotel, the Oregon Electric Depot, the Southern Pacific Railroad Depot, and several houses. For each structure there is a brief…

  8. Social health insurance contributes to universal coverage in South Africa, but generates inequities: survey among members of a government employee insurance scheme.

    Science.gov (United States)

    Goudge, Jane; Alaba, Olufunke A; Govender, Veloshnee; Harris, Bronwyn; Nxumalo, Nonhlanhla; Chersich, Matthew F

    2018-01-04

    Many low- and middle-income countries are reforming their health financing mechanisms as part of broader strategies to achieve universal health coverage (UHC). Voluntary social health insurance, despite evidence of resulting inequities, is attractive to policy makers as it generates additional funds for health, and provides access to a greater range of benefits for the formally employed. The South African government introduced a voluntary health insurance scheme (GEMS) for government employees in 2005 with the aim of improving access to care and extending health coverage. In this paper we ask whether the new scheme has assisted in efforts to move towards UHC. Using a cross-sectional survey across four of South Africa's nine provinces, we interviewed 1329 government employees, from the education and health sectors. Data were collected on socio-demographics, insurance coverage, health status and utilisation of health care. Multivariate logistic regression was used to determine if service utilisation was associated with insurance status. A quarter of respondents remained uninsured, even higher among 20-29 year olds (46%) and lower-skilled employees (58%). In multivariate analysis, the odds of an outpatient visit and hospital admission for the uninsured was 0.3 fold that of the insured. Cross-subsidisation within the scheme has provided lower-paid civil servants with improved access to outpatient care at private facilities and chronic medication, where their outpatient (0.54 visits/month) and inpatient utilisation (10.1%/year) approximates that of the overall population (29.4/month and 12.2% respectively). The scheme, however, generated inequities in utilisation among its members due to its differential benefit packages, with, for example, those with the most benefits having 1.0 outpatient visits/month compared to 0.6/month with lowest benefits. By introducing the scheme, the government chose to prioritise access to private sector care for government employees, over

  9. Cigarettes Butts and the Case for an Environmental Policy on Hazardous Cigarette Waste

    Directory of Open Access Journals (Sweden)

    Richard Barnes

    2009-05-01

    Full Text Available Discarded cigarette butts are a form of non-biodegradable litter. Carried as runoff from streets to drains, to rivers, and ultimately to the ocean and its beaches, cigarette filters are the single most collected item in international beach cleanups each year. They are an environmental blight on streets, sidewalks, and other open areas. Rather than being a protective health device, cigarette filters are primarily a marketing tool to help sell ‘safe’ cigarettes. They are perceived by much of the public (especially current smokers to reduce the health risks of smoking through technology. Filters have reduced the machine-measured yield of tar and nicotine from burning cigarettes, but there is controversy as to whether this has correspondingly reduced the disease burden of smoking to the population. Filters actually may serve to sustain smoking by making it seem less urgent for smokers to quit and easier for children to initiate smoking because of reduced irritation from early experimentation. Several options are available to reduce the environmental impact of cigarette butt waste, including developing biodegradable filters, increasing fines and penalties for littering butts, monetary deposits on filters, increasing availability of butt receptacles, and expanded public education. It may even be possible to ban the sale of filtered cigarettes altogether on the basis of their adverse environmental impact. This option may be attractive in coastal regions where beaches accumulate butt waste and where smoking indoors is increasingly prohibited. Additional research is needed on the various policy options, including behavioral research on the impact of banning the sale of filtered cigarettes altogether.

  10. Cigarettes butts and the case for an environmental policy on hazardous cigarette waste.

    Science.gov (United States)

    Novotny, Thomas E; Lum, Kristen; Smith, Elizabeth; Wang, Vivian; Barnes, Richard

    2009-05-01

    Discarded cigarette butts are a form of non-biodegradable litter. Carried as runoff from streets to drains, to rivers, and ultimately to the ocean and its beaches, cigarette filters are the single most collected item in international beach cleanups each year. They are an environmental blight on streets, sidewalks, and other open areas. Rather than being a protective health device, cigarette filters are primarily a marketing tool to help sell 'safe' cigarettes. They are perceived by much of the public (especially current smokers) to reduce the health risks of smoking through technology. Filters have reduced the machine-measured yield of tar and nicotine from burning cigarettes, but there is controversy as to whether this has correspondingly reduced the disease burden of smoking to the population. Filters actually may serve to sustain smoking by making it seem less urgent for smokers to quit and easier for children to initiate smoking because of reduced irritation from early experimentation. Several options are available to reduce the environmental impact of cigarette butt waste, including developing biodegradable filters, increasing fines and penalties for littering butts, monetary deposits on filters, increasing availability of butt receptacles, and expanded public education. It may even be possible to ban the sale of filtered cigarettes altogether on the basis of their adverse environmental impact. This option may be attractive in coastal regions where beaches accumulate butt waste and where smoking indoors is increasingly prohibited. Additional research is needed on the various policy options, including behavioral research on the impact of banning the sale of filtered cigarettes altogether.

  11. Communication Skills of Dentist Faculty Members of Islamic Azad University Based on a Student Survey and its Relation with Faculties Evaluation by Students

    Directory of Open Access Journals (Sweden)

    saeideh Abzan

    2009-11-01

    Full Text Available Background and purpose: Given the fact that identifying the problems of faculty members improvement are important, we investigated the communication skills of faculty members and examined if here isany association between good communication skill and the scores faculty members get from students evaluation in dental school of Islamic Azad University in Tehran.Methods: In this cross-sectional study, the students filled a questionnaire which assessed the communication skill (verbal and non verbal of faculty members based on a Likert’s type scale ranging from very good, to good, moderate, and poor at two weeks after the beginning of the course.The verbal communication skill were assessed based on 7 factors and the non verbal communication skill were evaluated based on 11 items .These items were extracted from standard communication text for content validity and the reliability was examined through a pilot test-retest procedure withr=0.85. Two weeks before the end of the same semester the students completed the faculties’ evaluation form which included 16 items. The validity and reliability of the faculty evaluation have previouslyestablished.The students selected one choice out of a range of very good, good, moderate, poor for each of the above items. The data were examined for correlation of communication skill with faculty evaluation by students by chi-square test.Results: In this study 1278 students assessed 154 faculty members in 234 class or clinics by completing 9107 questionnaire for communication skill and 9107 from for evaluation of faculty members. Of all participants 55.4% evaluated communication skills of faculty members as good, 31.8% as moderate and 12.8% as poor. Faculties were evaluated as good by 54%, of students, as moderate by 32.8% and as poor by 14.2%. Faculties with higher communication skill scores tend to have higher evaluationscores (p<0.001 Conclusions: It seems that the communication skill of faculty members of Islamic

  12. California Air Quality State Implementation Plans; Final Approval; Butte County Air Quality Management District; Stationary Source Permits

    Science.gov (United States)

    EPA is taking final action to approve a revision to the Butte County Air Quality Management District (BCAQMD) portion of the California State Implementation Plan (SIP). This revision concerns the District's New Source Review (NSR) permitting program.

  13. Development of radiographic technique for examining k-type butt weld

    International Nuclear Information System (INIS)

    Barui, K.L.; Bhattacharyya, B.

    1983-01-01

    An attempt is made to develop a radiographic technique for examining K-type full penetration butt joints in heavy duty crane girders. The existing standard techniques of radiographic examination is found to be unsuitable to assess the internal defects properly. The examination technique reported here is successful in detecting not only the nature of the internal defects but also their degree of severities - from which clues for avoiding the most probable defects can be found out. The results of radiographic examination applied on the K-type butt joints of heavy duty crane girders have been discussed and it is specified that the acceptable limit of the defects must lie between 'blue' and 'green' according to the IIW colour code. Much work is yet to be done before standard specifications regarding the acceptibility of the defects in the actual job can be formulated. (author)

  14. A new method to butt weld pipes with laser at different angles

    International Nuclear Information System (INIS)

    Gualini, M.M.S.

    1999-01-01

    Laser butt welding of pipes at different angles may be cumbersome and may require very expensive tooling. The pipe size may not allow using the laser for large volume throughputs. We propose a rotary optical head composed by an adjustable focus lens system and two reflecting mirrors. The laser beam is bent at 90 deg. C. so that weld can be performed inwards outwards. The optic head design compensates the rotary backlash and vibrations, like a penta prism thus ensuring a perfect follow up of the weld track. The optic head can be inclined at 45 deg. C. to laser butt weld pipe each other at 90 deg. C. In this case the laser beam focus position is computer controlled in order to keep the focus point always on the elliptical weld profile. The paper covers theoretical and practical aspects of the proposed device. (author)

  15. Wrought stainless steel butt-welding fittings: including reference to other corrosion resistant materials - approved 1971

    International Nuclear Information System (INIS)

    Anon.

    1975-01-01

    ANSI B16.9 is the American Standard for steel butt-welding fittings and although not so stated, it is implied that its scope deals primarily with the schedules of wall thicknesses which are common to carbon steel and the grades of alloy steel piping that are selected for pressure and temperature considerations. The purpose of this standard is to provide industry with a set of dimensional standards for butt-welding fittings that can be used with these light wall pipes of corrosion resisting materials. The center-to-end dimensions of all fittings are identical with those in ANSI B16.9 which give to industry the advantage of uniform design room practice and a maximum utilization of existing die equipment. The only departure from this is in the lap-joint stub end where for purposes of economy the face-to-end of the product has been reduced for use with thin wall piping

  16. Vision and spectroscopic sensing for joint tracing in narrow gap laser butt welding

    Science.gov (United States)

    Nilsen, Morgan; Sikström, Fredrik; Christiansson, Anna-Karin; Ancona, Antonio

    2017-11-01

    The automated laser beam butt welding process is sensitive to positioning the laser beam with respect to the joint because a small offset may result in detrimental lack of sidewall fusion. This problem is even more pronounced in case of narrow gap butt welding, where most of the commercial automatic joint tracing systems fail to detect the exact position and size of the gap. In this work, a dual vision and spectroscopic sensing approach is proposed to trace narrow gap butt joints during laser welding. The system consists of a camera with suitable illumination and matched optical filters and a fast miniature spectrometer. An image processing algorithm of the camera recordings has been developed in order to estimate the laser spot position relative to the joint position. The spectral emissions from the laser induced plasma plume have been acquired by the spectrometer, and based on the measurements of the intensities of selected lines of the spectrum, the electron temperature signal has been calculated and correlated to variations of process conditions. The individual performances of these two systems have been experimentally investigated and evaluated offline by data from several welding experiments, where artificial abrupt as well as gradual deviations of the laser beam out of the joint were produced. Results indicate that a combination of the information provided by the vision and spectroscopic systems is beneficial for development of a hybrid sensing system for joint tracing.

  17. A Vision-Aided 3D Path Teaching Method before Narrow Butt Joint Welding.

    Science.gov (United States)

    Zeng, Jinle; Chang, Baohua; Du, Dong; Peng, Guodong; Chang, Shuhe; Hong, Yuxiang; Wang, Li; Shan, Jiguo

    2017-05-11

    For better welding quality, accurate path teaching for actuators must be achieved before welding. Due to machining errors, assembly errors, deformations, etc., the actual groove position may be different from the predetermined path. Therefore, it is significant to recognize the actual groove position using machine vision methods and perform an accurate path teaching process. However, during the teaching process of a narrow butt joint, the existing machine vision methods may fail because of poor adaptability, low resolution, and lack of 3D information. This paper proposes a 3D path teaching method for narrow butt joint welding. This method obtains two kinds of visual information nearly at the same time, namely 2D pixel coordinates of the groove in uniform lighting condition and 3D point cloud data of the workpiece surface in cross-line laser lighting condition. The 3D position and pose between the welding torch and groove can be calculated after information fusion. The image resolution can reach 12.5 μm. Experiments are carried out at an actuator speed of 2300 mm/min and groove width of less than 0.1 mm. The results show that this method is suitable for groove recognition before narrow butt joint welding and can be applied in path teaching fields of 3D complex components.

  18. A Demonstration System for Capturing Geothermal Energy from Mine Waters beneath Butte, Montana

    Energy Technology Data Exchange (ETDEWEB)

    Blackketter, Donald [Montana Tech of the Univ. of Montana, Butte, MT (United States)

    2015-06-01

    Executive Summary An innovative 50-ton ground-source heat pump (GSHP) system was installed to provide space heating and cooling for a 56,000 square foot (5,200 square meter) building in Butte Montana, in conjunction with its heating and chiller systems. Butte is a location with winter conditions much colder than the national average. The GSHP uses flooded mine waters at 78F (25C) as the heat source and heat sink. The heat transfer performance and efficiency of the system were analyzed using data from January through July 2014. This analysis indicated that for typical winter conditions in Butte, Montana, the GSHP could deliver about 88% of the building’s annual heating needs. Compared with a baseline natural-gas/electric system, the system demonstrated at least 69% site energy savings, 38% source energy savings, 39% carbon dioxide emissions reduction, and a savings of $17,000 per year (40%) in utility costs. Assuming a $10,000 per ton cost for installing a production system, the payback period at natural gas costs of $9.63/MMBtu and electricity costs of $0.08/kWh would be in the range of 40 to 50 years. At higher utility prices, or lower installation costs, the payback period would obviously be reduced.

  19. Family members' satisfaction with care and decision-making in intensive care units and post-stay follow-up needs-a cross-sectional survey study.

    Science.gov (United States)

    Frivold, Gro; Slettebø, Åshild; Heyland, Daren K; Dale, Bjørg

    2018-01-01

    The aim of this study was to explore family members' satisfaction with care and decision-making during the intensive care units stay and their follow-up needs after the patient's discharge or death. A cross-sectional survey study was conducted. Family members of patients recently treated in an ICU were participating. The questionnaire contented of background variables, the instrument Family Satisfaction in ICU (FS-ICU 24) and questions about follow-up needs. Descriptive and non-parametric statistics and a multiple linear regression were used in the analysis. A total of 123 (47%) relatives returned the questionnaire. Satisfaction with care was higher scored than satisfaction with decision-making. Follow- up needs after the ICU stay was reported by 19 (17%) of the participants. Gender and length of the ICU stay were shown as factors identified to predict follow-up needs.

  20. Attitudes Regarding Labial Hypertrophy and Labiaplasty: A Survey of Members of the Society of Gynecologic Surgeons and the North American Society for Pediatric and Adolescent Gynecology.

    Science.gov (United States)

    Westermann, Lauren B; Oakley, Susan H; Mazloomdoost, Donna; Crisp, Catrina C; Kleeman, Steven D; Benbouajili, Janine M; Pauls, Rachel N

    2016-01-01

    The aim of this study was to describe gynecologists' attitudes toward labial hypertrophy and explore possible differences among providers for pediatric/adolescent patients. This was an institutional review board-approved, cross-sectional survey of physician attendees at 2 national meetings in 2014: the Society of Gynecologic Surgeons (SGS) and the North American Society for Pediatric and Adolescent Gynecology (NASPAG). The survey was designed to query demographics and impressions regarding labial hypertrophy and labiaplasty. Three hundred sixty-five surveys were completed (response rate, 50%); 268 were analyzed: 55% from SGS and 45% from NASPAG. Most were older than 41 years; 170 (63%) were women, and 93 (35%) were men. More men than women attended SGS (60%); however, women were the majority at NASPAG (94%).Most respondents believed labial hypertrophy to be infrequently reported and "a condition that impacts body image." Common symptoms were "discomfort with exercise" and "dissatisfaction with appearance naked." The majority felt this to impact sexual function "in some cases," citing "self-esteem" and "comfort" most often.Concerning therapies for provided labial hypertrophy, 83% of practitioners provide reassurance, whereas 77% would offer labiaplasty. Expertise with labiaplasty varied; 28% felt "very comfortable," and 11% felt "very uncomfortable."Provider preference for treatment differed based on meeting attendance. After logistic regression controlling for sex and age, attendance at SGS remained associated with offering labiaplasty (P = 0.001; odds ratio, 4.1; 95% confidence interval, 1.8-9.3), whereas NASPAG attendance was associated with providing reassurance (P = 0.008; odds ratio, 0.30; 95% confidence interval, 0.10-0.70). Although the majority surveyed view labial hypertrophy to be bothersome, gynecologists caring for our youngest patients are more likely to provide reassurance. Consensus guidelines are needed to aid practitioners in appropriate management

  1. Incorporation of cigarette butts into nests reduces nest ectoparasite load in urban birds: new ingredients for an old recipe?

    Science.gov (United States)

    Suárez-Rodríguez, Monserrat; López-Rull, Isabel; Garcia, Constantino Macías

    2013-02-23

    Birds are known to respond to nest-dwelling parasites by altering behaviours. Some bird species, for example, bring fresh plants to the nest, which contain volatile compounds that repel parasites. There is evidence that some birds living in cities incorporate cigarette butts into their nests, but the effect (if any) of this behaviour remains unclear. Butts from smoked cigarettes retain substantial amounts of nicotine and other compounds that may also act as arthropod repellents. We provide the first evidence that smoked cigarette butts may function as a parasite repellent in urban bird nests. The amount of cellulose acetate from butts in nests of two widely distributed urban birds was negatively associated with the number of nest-dwelling parasites. Moreover, when parasites were attracted to heat traps containing smoked or non-smoked cigarette butts, fewer parasites reached the former, presumably due to the presence of nicotine. Because urbanization changes the abundance and type of resources upon which birds depend, including nesting materials and plants involved in self-medication, our results are consistent with the view that urbanization imposes new challenges on birds that are dealt with using adaptations evolved elsewhere.

  2. Prevalance rate of low-dose CT lung cancer screening. Results of a questionnaire survey of member facilities of Japan society of ningen dock with special concerns regarding the actual status and disincentives for implementing such screening

    International Nuclear Information System (INIS)

    Takizawa, Hirotaka

    2012-01-01

    We conducted a survey of member facilities of the Japan Society of Ningen Dock to elucidate the actual status of chest computed tomography (CT) screening and the reasons for not being able to change to low-dose CT. We sent a questionnaire consisting of 9 items to 531 member facilities in July 2010, response by facsimile to obtain an analysis. The prevalence rate of low-dose CT lung cancer screening slightly increased to 35% in comparison with the former survey done in November 2008. Some facilities indicated some shift in tube current to a lower range even though this was insufficient to meet the definition of low-dose CT. This reflects their thinking of ''Even with knowledge, there is strong hesitation to change to low-dose CT''. Among the reasons why they did not change to low-dose CT, a priority for high quality images was the top reason among problems of devices and performance. Informed consent was not yet adequate. It is necessary for manufactures to develop better technology to improve the image quality of low-dose CT and to report enough information to clinicians. On the medical side, perception of the necessity for appropriate reduction of radiation dose and the decision to move to low-dose CT would be of crucial significance for facility heads as well as radiologists and technicians. (author)

  3. Butt Weldability for SS400 Using Laser-Arc Hybrid Welding

    International Nuclear Information System (INIS)

    Kim, Jong Do; Myoung, Gi Hoon; Park, Duck; Myoung, Gi Hoon; Park, In Duck

    2016-01-01

    This study presents results of an experimental investigation of the laser-arc, hybrid, butt welding process of SS400 structural steel. Welding parameters including laser power, welding current and speed were varied in order to obtain one-pass, full-penetration welds without defects. The conditions that resulted in optimal beads were identified. After welding, hardness measurements and microstructure observations were carried out in order to study weld properties. The mechanical properties of both the base material and welded specimen were compared based on the results of tensile strength measurements. The yield and tensile strengths were found to be similar

  4. Butt Weldability for SS400 Using Laser-Arc Hybrid Welding

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Do; Myoung, Gi Hoon; Park, Duck [Korea Maritime and Ocean Univ., Busan (Korea, Republic of); Myoung, Gi Hoon; Park, In Duck [Korea Institute of Machinery and Materials, Busan (Korea, Republic of)

    2016-07-15

    This study presents results of an experimental investigation of the laser-arc, hybrid, butt welding process of SS400 structural steel. Welding parameters including laser power, welding current and speed were varied in order to obtain one-pass, full-penetration welds without defects. The conditions that resulted in optimal beads were identified. After welding, hardness measurements and microstructure observations were carried out in order to study weld properties. The mechanical properties of both the base material and welded specimen were compared based on the results of tensile strength measurements. The yield and tensile strengths were found to be similar.

  5. Gas metal arc welding of butt joint with varying gap width based on neural networks

    DEFF Research Database (Denmark)

    Christensen, Kim Hardam; Sørensen, Torben

    2005-01-01

    penetration, when the gap width is varying during the welding process. The process modeling to facilitate the mapping from joint geometry and reference weld quality to significant welding parameters, has been based on a multi-layer feed-forward network. The Levenberg-Marquardt algorithm for non-linear least......This paper describes the application of the neural network technology for gas metal arc welding (GMAW) control. A system has been developed for modeling and online adjustment of welding parameters, appropriate to guarantee a certain degree of quality in the field of butt joint welding with full...

  6. TEM analysis of a friction stir-welded butt joint of Al-Si-Mg alloys

    International Nuclear Information System (INIS)

    Cabibbo, M.; Meccia, E.; Evangelista, E.

    2003-01-01

    The microstructure evolution of a joint of Al-Si-Mg alloys A6056-T4 and A6056-T6 has been characterized by transmission electron microscopy (TEM). Metallurgical investigations, hardness and mechanical tests were also performed to correlate the TEM investigations to the mechanical properties of the produced friction stir-welded butt joint. After friction stir-welding thermal treatment has been carried out at 530 deg. C followed by ageing at 160 deg. C (T6). The base material (T4) and the heat-treated one (T6) were put in comparison showing a remarkable ductility reduction of the joint after T6 treatment

  7. Survey on education and training of medical physicists in the member states of the European Community with reference to the patient directive (84/466/Euratom)

    International Nuclear Information System (INIS)

    Schmitt-Hannig, A.

    1991-01-01

    Article 5 of Directive 84/466/Euratom mentions the availability of a qualified expert in radiophysics to sophisticated departments of radiotherapy and nuclear medicine. Since the qualified expert has a major and direct role to play in the protection of the patient undergoing medical examination or treatment involving ionizing radiation, his presence in the hospital and the training he has received are considerable aspects of radiation protection in the medical domain. The application of Article 5 of Directive 84/466/Euratom is of great importance for the protection of the patient undergoing medical examination or treatment involving ionizing radiation. This report, developed to evaluate the actual application of this article, reveals that although in several Member States the concept of the qualified expert in radiophysics has already been introduced into national law, in practice a need for further harmonization clearly emerges. On the availability of training facilities, the situation in the Community is rather positive, but the formal recognition of training and education of medical physicists by government bodies is still in a developing stage

  8. [Prevalence of risk health behavior among members of private health insurance plans: results from the 2008 national telephone survey Vigitel, Brazil].

    Science.gov (United States)

    Malta, Deborah Carvalho; Oliveira, Martha Regina de; Moura, Erly Catarina de; Silva, Sara Araújo; Zouain, Cláudia Soares; Santos, Fausto Pereira Dos; Morais Neto, Otaliba Libanio de; Penna, Gerson de Oliveira

    2011-03-01

    This article aims at estimating the prevalence of adults engaging in protective and risk health behaviors among members of private health insurance plans. It was used a random sample of individuals over the age of 18 living in the Brazilian state capitals collected on 28,640 telephone interviews in 2008. The results showed that among males there was a high prevalence of the following risk factors: tobacco, overweight, low fruit and vegetable consumption, high meat with fat consumption and alcohol drinking. Among females we found a high prevalence of high blood pressure, diabetes, dyslipidemia and osteoporosis. Men were generally more physically active and women consumed more fruit and vegetables. As more educated males were lower was the prevalence of tobacco, high blood pressure, but also a higher prevalence of overweight, consumption of meat with fat, dyslipidemia and lower number of yearly check-ups done. For females, tobacco smoking, overweight, obesity, decreasing with schooling, and consumption of fruit and vegetables, physical activity, mammography and PAP test, increased with schooling. The health insurance user population constitutes about 26% of Brazilian people and the current study aims to accumulate evidence for health promotion actions by this public.

  9. Current perceptions of the term Clinical Pharmacy and its relationship to Pharmaceutical Care: a survey of members of the European Society of Clinical Pharmacy.

    Science.gov (United States)

    Dreischulte, Tobias; Fernandez-Llimos, Fernando

    2016-12-01

    Background The definitions that are being used for the terms 'clinical pharmacy' and 'pharmaceutical care' seem to have a certain overlap. Responsibility for therapy outcomes seems to be especially linked to the latter term. Both terms need clarification before a proper definition of clinical pharmacy can be drafted. Objective To identify current disagreements regarding the term 'Clinical Pharmacy' and its relationship to 'Pharmaceutical Care' and to assess to which extent pharmacists with an interest in Clinical Pharmacy are willing to accept responsibility for drug therapy outcomes. Setting The membership of the European Society of Clinical Pharmacy. Methods A total of 1,285 individuals affiliated with the European Society of Clinical Pharmacy were invited by email to participate in an online survey asking participants to state whether certain professional activities, providers, settings, aims and general descriptors constituted (a) 'Clinical Pharmacy only', (b) 'Pharmaceutical Care only', (c) 'both' or (d) 'neither'. Further questions examined pharmacists' willingness to accept ethical or legal responsibility for drug therapy outcomes, under current and ideal working conditions. Main outcome measures Level of agreement with a number of statements. Results There was disagreement (responsibility under current/ideal working conditions were: safety (32.7%/64.3%), effectiveness (17.9%/49.2%), patient-centeredness (17.1%/46.2%), cost-effectiveness (20.3%/44.0%). Conclusions The survey identified key disagreements around the term 'Clinical Pharmacy' and its relationship to 'Pharmaceutical Care', which future discussions around a harmonised definition of 'Clinical Pharmacy' should aim to resolve. Further research is required to understand barriers and facilitators to pharmacists accepting responsibility for drug therapy outcomes.

  10. The geology of Pine and Crater Buttes: Two basaltic constructs on the far eastern Snake River Plain

    Science.gov (United States)

    Mazierski, Paul F.; King, John S.

    1987-01-01

    The emplacement history and petrochemical evolution of the volcanics associated with Pine Butte, Crater Butte, and other nearby vents are developed and described. Four major vents were identified in the study area and their associated eruptive products were mapped. All of the vents show a marked physical elongation or linear orientation coincident with the observed rift set. Planetary exploration has revealed the importance of volcanic processes in the genesis and modification of extraterrestrial surfaces. Interpretation of surface features has identified plains-type basaltic volcanism in various mare regions of the Moon and the volcanic provinces of Mars. Identification of these areas with features that appear analogous to those observed in the Pine Butte area suggests similar styles of eruption and mode of emplacement. Such terrestrial analogies serve as a method to interpret the evolution of volcanic planetary surfaces on the inner planets.

  11. Allergists' self-reported adherence to anaphylaxis practice parameters and perceived barriers to care: an American College of Allergy, Asthma, and Immunology member survey.

    Science.gov (United States)

    Fineman, Stanley; Dowling, Paul; O'Rourke, Dianne

    2013-12-01

    Anaphylaxis is life-threatening and requires rapid medical intervention. Knowledge of treatment guidelines and addressing barriers to care are essential for appropriate management. To investigate allergists' self-reported practices in managing patients at risk for anaphylaxis, specifically in following practice parameters for diagnosis, treatment, and appropriate use of epinephrine, and to identify perceived barriers to care. Online questionnaires were distributed to members of the American College of Allergy, Asthma, and Immunology. The US physicians who self-identified as "allergist/immunologist" were eligible to participate. The first 500 completed questionnaires were analyzed. Nearly all (≥95%) reported adherence to practice parameters in prescribing an epinephrine auto-injector and instructing patients on its use, taking a detailed allergy history, counseling patients on avoidance measures, and educating patients on the signs and symptoms of anaphylaxis. More than 90% stated they determined the best diagnostic procedures to identify triggers and coordinated laboratory and allergy testing. Adherence to practice parameters was less robust for providing patients with written action plans and in-office anaphylaxis preparedness. Perceived barriers to care included a significant proportion of patients who were uncomfortable using epinephrine auto-injectors and inadequate knowledge of anaphylaxis among referral physicians. Allergists overwhelmingly adhere to practice parameter recommendations for the treatment and management of anaphylaxis, including appropriate use of epinephrine as first-line treatment, educating patients, and testing to diagnose anaphylaxis and identify its triggers. Opportunities for improvement include preparing staff and patients for anaphylactic events, providing written action plans, and improving knowledge of referring physicians. Copyright © 2013 American College of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights

  12. Analytical model of stress field in submerged arc welding butt joint with thorough penetration

    Directory of Open Access Journals (Sweden)

    Winczek Jerzy

    2018-01-01

    Full Text Available Analytical model of temporary and residual stresses for butt welding with thorough penetration was described assuming planar section hypothesis and using integral equations of stress equilibrium of the bar and simple Hooke’s law. In solution the effect of phase transformations (structure changes and structural strains has been taken into account. Phase transformations during heating are limited by temperature values at the beginning and at the end of austenitic transformation, depending on chemical composition of steel while the progress of phase transformations during cooling is determined on the basis of TTT-welding diagram. Temperature values at the beginning and at the end of transformation are conditioned by the speed of heating. Kinetics of diffusional transformation is described basing on Johnson-Mehl-Avrami-Kolmogorov equation, while martensitic transformation, basing on Koistinen-Marburger equation. Stresses in elasto-plastic state are determined by iteration, using elastic solutions method with changeable longitudinal modulus of elasticity, conditioned by stress-strain curve. Computations of stress field have been conducted for one-side butt welded of two steel flats made from S235 steel. It has enabled a clear interpretation of influence of temperature field and phase transformation on stresses caused by welding using Submerged Arc Welding (SAW method.

  13. The microstructure of aluminum A5083 butt joint by friction stir welding

    International Nuclear Information System (INIS)

    Jasri, M. A. H. M.; Afendi, M.; Ismail, A.; Ishak, M.

    2015-01-01

    This study presents the microstructure of the aluminum A5083 butt joint surface after it has been joined by friction stir welding (FSW) process. The FSW process is a unique welding method because it will not change the chemical properties of the welded metals. In this study, MILKO 37 milling machine was modified to run FSW process on 4 mm plate of aluminum A5083 butt joint. For the experiment, variables of travel speed and tool rotational speed based on capability of machine were used to run FSW process. The concentrated heat from the tool to the aluminum plate changes the plate form from solid to plastic state. Two aluminum plates is merged to become one plate during plastic state and return to solid when concentrated heat is gradually further away. After that, the surface and cross section of the welded aluminum were investigated with a microscope by 400 x multiplication zoom. The welding defect in the FSW aluminum was identified. Then, the result was compared to the American Welding Society (AWS) FSW standard to decide whether the plate can be accepted or rejected

  14. A Precise Visual Method for Narrow Butt Detection in Specular Reflection Workpiece Welding

    Directory of Open Access Journals (Sweden)

    Jinle Zeng

    2016-09-01

    Full Text Available During the complex path workpiece welding, it is important to keep the welding torch aligned with the groove center using a visual seam detection method, so that the deviation between the torch and the groove can be corrected automatically. However, when detecting the narrow butt of a specular reflection workpiece, the existing methods may fail because of the extremely small groove width and the poor imaging quality. This paper proposes a novel detection method to solve these issues. We design a uniform surface light source to get high signal-to-noise ratio images against the specular reflection effect, and a double-line laser light source is used to obtain the workpiece surface equation relative to the torch. Two light sources are switched on alternately and the camera is synchronized to capture images when each light is on; then the position and pose between the torch and the groove can be obtained nearly at the same time. Experimental results show that our method can detect the groove effectively and efficiently during the welding process. The image resolution is 12.5 μm and the processing time is less than 10 ms per frame. This indicates our method can be applied to real-time narrow butt detection during high-speed welding process.

  15. Primary water stress corrosion cracking resistance of alloy 690 heat affected zones of butt welds

    International Nuclear Information System (INIS)

    Fournier, L.; Calonne, O.; Toloczko, M.B.; Bruemmer, S.M.; Massoud, J.P.; Lemaire, E.; Gerard, R.; Somville, F.; Richnau, A.; Lagerstrom, J.

    2015-01-01

    A wide V-groove butt weld was fabricated from Alloy 690 plates using Alloy 152 filler material, maximum allowable heat input, and very stiff strong-backs. Alloy 690 heat affected zones (HAZ) was characterized in terms of microstructure and plastic strains induced by weld shrinkage. Crack initiation tests were carried out in pure hydrogenated steam at 400 C. degrees for 4000 h. Crack growth rate tests were performed in simulated PWR primary water at a temperature of 360 C. degrees. A maximum plastic strain around 5% was measured in the vicinity of the fusion line, which decreased almost linearly with the distance from the fusion line. Crack initiation tests on Alloy 690 HAZ specimens as well as on 30% cold-rolled Alloy 690 specimens were performed in pure hydrogenated steam at 400 C. degrees (partial pressure of hydrogen = 0.7 bar) for a total of 4000 h using cylindrical notched tensile specimens, reverse U-bends and flat micro-tensile specimens. No crack initiation was detected. Stress corrosion propagation rates revealed extremely low SCC (Stress Corrosion Cracking) growth rates both in the base metal and in the HAZ region whose magnitudes are of no engineering significance. Overall, the results indicated limited plastic strain induced by weld shrinkage in butt weld HAZ, and to no particular susceptibility of primary water stress corrosion cracking. (authors)

  16. The microstructure of aluminum A5083 butt joint by friction stir welding

    Energy Technology Data Exchange (ETDEWEB)

    Jasri, M. A. H. M.; Afendi, M. [School of Mechatronic Engineering, Universiti Malaysia Perlis, Pauh, 02600, Arau, Perlis (Malaysia); Ismail, A. [UniKL MIMET, JalanPantaiRemis, 32200, Lumut, Perak (Malaysia); Ishak, M. [Faculty of Mechanical Engineering, Universiti Malaysia Pahang, 02600, Pekan, Pahang (Malaysia)

    2015-05-15

    This study presents the microstructure of the aluminum A5083 butt joint surface after it has been joined by friction stir welding (FSW) process. The FSW process is a unique welding method because it will not change the chemical properties of the welded metals. In this study, MILKO 37 milling machine was modified to run FSW process on 4 mm plate of aluminum A5083 butt joint. For the experiment, variables of travel speed and tool rotational speed based on capability of machine were used to run FSW process. The concentrated heat from the tool to the aluminum plate changes the plate form from solid to plastic state. Two aluminum plates is merged to become one plate during plastic state and return to solid when concentrated heat is gradually further away. After that, the surface and cross section of the welded aluminum were investigated with a microscope by 400 x multiplication zoom. The welding defect in the FSW aluminum was identified. Then, the result was compared to the American Welding Society (AWS) FSW standard to decide whether the plate can be accepted or rejected.

  17. Study on Tensile Fatigue Behavior of Thermal Butt Fusion in Safety Class III High-Density Polyethylene Buried Piping in Nuclear Power Plants

    International Nuclear Information System (INIS)

    Kim, Jong Sung; Lee, Young Ju; Oh, Young Jin

    2015-01-01

    High-density polyethylene (HDPE) piping, which has recently been applied to safety class III piping in nuclear power plants, can be butt-joined through the thermal fusion process, which heats two fused surfaces and then subject to axial pressure. The thermal fusion process generates bead shapes on the butt fusion. The stress concentrations caused by the bead shapes may reduce the fatigue lifetime. Thus, investigating the effect of the thermal butt fusion beads on fatigue behavior is necessary. This study examined the fatigue behavior of thermal butt fusion via a tensile fatigue test under stress-controlled conditions using finite element elastic stress analysis. Based on the results, the presence of thermal butt fusion beads was confirmed to reduce the fatigue lifetime in the low-cycle fatigue region while having a negligible effect in the medium- and high-cycle fatigue regions

  18. Study on Tensile Fatigue Behavior of Thermal Butt Fusion in Safety Class III High-Density Polyethylene Buried Piping in Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Sung; Lee, Young Ju [Sunchon National University, Suncheon (Korea, Republic of); Oh, Young Jin [KEPCO E and C, Yongin (Korea, Republic of)

    2015-01-15

    High-density polyethylene (HDPE) piping, which has recently been applied to safety class III piping in nuclear power plants, can be butt-joined through the thermal fusion process, which heats two fused surfaces and then subject to axial pressure. The thermal fusion process generates bead shapes on the butt fusion. The stress concentrations caused by the bead shapes may reduce the fatigue lifetime. Thus, investigating the effect of the thermal butt fusion beads on fatigue behavior is necessary. This study examined the fatigue behavior of thermal butt fusion via a tensile fatigue test under stress-controlled conditions using finite element elastic stress analysis. Based on the results, the presence of thermal butt fusion beads was confirmed to reduce the fatigue lifetime in the low-cycle fatigue region while having a negligible effect in the medium- and high-cycle fatigue regions.

  19. The impact of awareness of terminal illness on quality of death and care decision making: a prospective nationwide survey of bereaved family members of advanced cancer patients.

    Science.gov (United States)

    Ahn, Eunmi; Shin, Dong Wook; Choi, Jin Young; Kang, Jina; Kim, Dae Kyun; Kim, Hyesuk; Lee, Eunil; Hwang, Kwan Ok; Oh, Bumjo; Cho, BeLong

    2013-12-01

    We aimed to assess whether awareness of a terminal illness can affect care decision making processes and the achievement of a good death in advanced cancer patients receiving palliative care services. Awareness of terminal illness at the time of palliative care service admission was assessed by the health care professionals during the routine initial comprehensive assessment process and was recorded in the national terminal cancer patient registry. A follow-up nationwide bereavement survey was conducted, which contained questions regarding decision making processes and the Korean version of the Good Death Inventory. Among the 345 patients included in the final analysis, the majority (68.4%) of the patients were aware of the terminal illness. Awareness of the terminal illness tended to reduce discordances in care decision making (adjusted odds ratio = 0.55; 95% CI: 0.29-1.07), and increased the patients' own decision making when there were discordances between patients and their families (adjusted odds ratio = 3.79; 95% CI: 1.31-10.94). The Good Death Inventory score was significantly higher among patients who were aware of their terminal illnesses compared with those who were not (5.04 vs. 4.80; p = 0.013) and especially in the domains of 'control over the future' (5.18 vs. 4.04; p Awareness of the terminal illness had beneficial effect on the harmonious decision making, patient autonomy, and patient's quality of death. Disclosure of terminal illness should be encouraged. Copyright © 2013 John Wiley & Sons, Ltd.

  20. Age of the middle Palaeolithic site of La Butte d'Arvigny (Moissy-Cramayel, Seine-et-Marne); Datation du site paleolithique moyen de la Butte d'Arvigny (Moissy-Cramayel, Seine-et-Marne)

    Energy Technology Data Exchange (ETDEWEB)

    Laurent, M. [Ecole Nationale Superieure de Chimie, Lab. de Travaux Pratiques de Genie Chimique, 75 - Paris (France); Laurent, M.; Bahain, J.J.; Voinchet, P.; Ricard, J.L. [Lab. de Prehistoire du Museum National d' Histoire Naturelle, Institut de Paleontologie Humaine, UMR 6569 du CNRS, 75 - Paris (France); Rousseau, L. [Amiens Univ., Lab. de Sedimentologie et de Geochimie, 80 (France)

    2000-04-01

    The middle Palaeolithic site of La Butte d'Arvigny, close to Melun, was dated using electron spin resonance (ESR) method on burn flint. Five analysed burnt flints give a mean age of 90 000 years, which ascribes Arvigny to the Mousterian laminar complex of northern France. (authors)

  1. 76 FR 21331 - Certain Carbon Steel Butt-Weld Pipe Fittings From Brazil, Japan, Taiwan, Thailand, and the People...

    Science.gov (United States)

    2011-04-15

    ... the People's Republic of China: Continuation of Antidumping Duty Orders AGENCY: Import Administration... butt-weld pipe fittings from Brazil, Japan, Taiwan, Thailand, and the People's Republic of China (PRC), pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act). See Initiation of Five-Year...

  2. Butt-joint integration of active optical components based on InP/AlInGaAsP alloys

    DEFF Research Database (Denmark)

    Kulkova, Irina; Kuznetsova, Nadezda; Semenova, Elizaveta

    2014-01-01

    We demonstrate all-active planar high quality butt-joint (BJ) integration of a QW Semiconductor Optical Amplifier (SOA) and MQW Electro-Absorption Modulator (EAM) based on an InP/AlInGaAsP platform. The degradation of the optical properties in the vicinity of ~1 μm to the BJ interface was determi...

  3. TIG-dressing of High Strength Steel Butt Welded Connections. Part 1 : Weld Toe Geometry and Local Hardness

    NARCIS (Netherlands)

    Van Es, S.H.J.; Kolstein, M.H.; Pijpers, R.J.M.; Bijlaard, F.S.K.

    2014-01-01

    This paper presents the results of extensive measurements on weld toe geometry of as-welded and TIG-dressed butt welded connections in high strength steels S460, S690 and very high strength steels S890 and S1100. Descriptions of the measurement techniques and data analysis are presented. Four weld

  4. TIG-dressing of high strength steel butt welded connections - Part 1: weld toe geometry and local hardness

    NARCIS (Netherlands)

    Es, S.H.J. van; Kolstein, M.H.; Pijpers, R.J.M.; Bijlaard, F.S.K.

    2013-01-01

    This paper presents the results of extensive measurements on weld toe geometry of as-welded and TIG-dressed butt welded connections in high strength steels S460, S690 and very high strength steels S890 and S1100. Descriptions of the measurement techniques and data analysis are presented. Four weld

  5. 77 FR 18266 - Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines; Revised...

    Science.gov (United States)

    2012-03-27

    ... INTERNATIONAL TRADE COMMISSION [Investigation Nos. 731-TA-865-867 (Second Review)] Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines; Revised Schedule for the Subject Reviews AGENCY: United States International Trade Commission. ACTION: Notice. DATES: Effective Date: March...

  6. 75 FR 430 - Notice of Intent To Prepare an Environmental Impact Statement for the Sigurd-Red Butte...

    Science.gov (United States)

    2010-01-05

    ...; UTU-83067] Notice of Intent To Prepare an Environmental Impact Statement for the Sigurd-Red Butte...) Cedar City Field Office, Cedar City, Utah, intends to prepare an Environmental Impact Statement (EIS... Fishlake National Forests), State of Utah, Millard County, Sevier County, Beaver County, Utah Division of...

  7. 76 FR 30962 - Notice of Availability of Draft Environmental Impact Statement for the Sigurd to Red Butte No. 2...

    Science.gov (United States)

    2011-05-27

    ...; UTU-83067] Notice of Availability of Draft Environmental Impact Statement for the Sigurd to Red Butte..., as amended, the Bureau of Land Management (BLM) has prepared a Draft Environmental Impact Statement... Service; State of Utah; Millard, Sevier, Beaver, Iron, and Washington counties, Utah; and the cities of St...

  8. 76 FR 5205 - Carbon Steel Butt-Weld Pipe Fittings from Brazil, China, Japan, Taiwan, and Thailand

    Science.gov (United States)

    2011-01-28

    ...)] Carbon Steel Butt-Weld Pipe Fittings from Brazil, China, Japan, Taiwan, and Thailand AGENCY: United... Thailand. SUMMARY: The Commission hereby gives notice of the scheduling of expedited reviews pursuant to..., Taiwan, and Thailand would be likely to lead to continuation or recurrence of material injury within a...

  9. 75 FR 60814 - Carbon Steel Butt-Weld Pipe Fittings From Brazil, China, Japan, Taiwan, and Thailand

    Science.gov (United States)

    2010-10-01

    ...)] Carbon Steel Butt-Weld Pipe Fittings From Brazil, China, Japan, Taiwan, and Thailand AGENCY: United... Thailand. SUMMARY: The Commission hereby gives notice that it has instituted reviews pursuant to section... Thailand would be likely to lead to continuation or recurrence of material injury. Pursuant to section 751...

  10. Age of the middle Palaeolithic site of La Butte d'Arvigny (Moissy-Cramayel, Seine-et-Marne)

    International Nuclear Information System (INIS)

    Laurent, M.; Laurent, M.; Bahain, J.J.; Voinchet, P.; Ricard, J.L.; Rousseau, L.

    2000-01-01

    The middle Palaeolithic site of La Butte d'Arvigny, close to Melun, was dated using electron spin resonance (ESR) method on burn flint. Five analysed burnt flints give a mean age of 90 000 years, which ascribes Arvigny to the Mousterian laminar complex of northern France. (authors)

  11. 76 FR 19788 - Carbon Steel Butt-Weld Pipe Fittings From Brazil, China, Japan, Taiwan, and Thailand

    Science.gov (United States)

    2011-04-08

    ...)] Carbon Steel Butt-Weld Pipe Fittings From Brazil, China, Japan, Taiwan, and Thailand Determinations On... fittings from Brazil, China, Japan, Taiwan, and Thailand would be likely to lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time. \\1...

  12. Members of the Agency

    International Nuclear Information System (INIS)

    2007-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.63) is Palau which deposited its Instrument of Acceptance of the Statute on 2 March 2007. The Attachment hereto shows the dates on which the present 144 Member States became Members [fr

  13. Members of the Agency

    International Nuclear Information System (INIS)

    2007-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.63) is Palau which deposited its Instrument of Acceptance of the Statute on 2 March 2007. The Attachment hereto shows the dates on which the present 144 Member States became Members [es

  14. Episodic Holocene eruption of the Salton Buttes rhyolites, California, from paleomagnetic, U-Th, and Ar/Ar dating

    Science.gov (United States)

    Wright, Heather M.; Vazquez, Jorge A.; Champion, Duane E.; Calvert, Andrew T.; Mangan, Margaret T.; Stelten, Mark E.; Cooper, Kari M.; Herzig, Charles; Schriener Jr., Alexander

    2015-01-01

    In the Salton Trough, CA, five rhyolite domes form the Salton Buttes: Mullet Island, Obsidian Butte, Rock Hill, North and South Red Hill, from oldest to youngest. Results presented here include 40Ar/39Ar anorthoclase ages, 238U-230Th zircon crystallization ages, and comparison of remanent paleomagnetic directions with the secular variation curve, which indicate that all domes are Holocene. 238U-230Th zircon crystallization ages are more precise than but within uncertainty of 40Ar/39Ar anorthoclase ages, suggesting that zircon crystallization proceeded until shortly before eruption in all cases except one. Remanent paleomagnetic directions require three eruption periods: (1) Mullet Island, (2) Obsidian Butte, and (3) Rock Hill, North Red Hill, and South Red Hill. Borehole cuttings logs document up to two shallow tephra layers. North and South Red Hills likely erupted within 100 years of each other, with a combined 238U-230Th zircon isochron age of: 2.83 ± 0.60 ka (2 sigma); paleomagnetic evidence suggests this age predates eruption by hundreds of years (1800 cal BP). Rock Hill erupted closely in time to these eruptions. The Obsidian Butte 238U-230Th isochron age (2.86 ± 0.96 ka) is nearly identical to the combined Red Hill age, but its Virtual Geomagnetic Pole position suggests a slightly older age. The age of aphyric Mullet Island dome is the least well constrained: zircon crystals are resorbed and the paleomagnetic direction is most distinct; possible Mullet Island ages include ca. 2300, 5900, 6900, and 7700 cal BP. Our results constrain the duration of Salton Buttes volcanism to between ca. 5900 and 500 years.

  15. A novel butt-joint scheme for the preparation of electro-absorptive lasers

    International Nuclear Information System (INIS)

    Cheng Yuanbing; Pan Jiaoqing; Zhou Fan; Feng Wen; Wang Baojun; Zhu Hongliang; Zhao Lingjuan; Wang Wei

    2008-01-01

    A 1.55 μm InGaAsP/InGaAsP multiple-quantum-well electro-absorption modulator (EAM) monolithically integrated with a distributed feedback laser (DFB) diode has been realized based on a novel butt-joint scheme by ultra-low metal-organic vapour phase epitaxy for the first time. The threshold current of 25 mA and an extinction ratio of more than 30 dB are obtained by using the novel structure. The beam divergence angles at the horizontal and vertical directions are as small as 19.3 deg. x 13 deg., respectively, without a spot-size converter by undercutting the InGaAsP active region. The capacitance of the ridge waveguide device with a deep mesa buried by polyimide was reduced down to 0.30 pF

  16. Study of the joining of polycarbonate panels in butt joint configuration through friction stir welding

    Science.gov (United States)

    Astarita, Antonello; Boccarusso, Luca; Carrino, Luigi; Durante, Massimo; Minutolo, Fabrizio Memola Capece; Squillace, Antonino

    2018-05-01

    Polycarbonate sheets, 3 mm thick, were successfully friction stir welded in butt joint configuration. Aiming to study the feasibility of the process and the influence of the process parameters joints under different processing conditions, obtained by varying the tool rotational speed and the tool travel speed, were realized. Tensile tests were carried out to characterize the joints. Moreover the forces arising during the process were recorded and carefully studied. The experimental outcomes proved the feasibility of the process when the process parameters are properly set, joints retaining more than 70% of the UTS of the base material were produced. The trend of the forces was described and explained, the influence of the process parameters was also introduced.

  17. The Western Environmental Technology Office (WETO), Butte, Montana. Technology summary (Revised)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This document has been prepared by the US Department of Energy`s (DOE`s) Office of Environmental Management (EM) Office of Science and Technology (OST) to highlight its research, development, demonstration, testing, and evaluation (RDDT&E) activities funded through the Western environmental Technology Office (WETO) in Butte, Montana. Technologies and processes described in this document have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. The information presented in this document has been assembled from recently produced OST documents that highlight technology development activities within each of the OST program elements and Focus Areas. This document presents one in a series for each of DOE`s Operations Office and Energy Technology Centers.

  18. The Western Environmental Technology Office (WETO), Butte, Montana. Technology summary (Revised)

    International Nuclear Information System (INIS)

    1996-03-01

    This document has been prepared by the US Department of Energy's (DOE's) Office of Environmental Management (EM) Office of Science and Technology (OST) to highlight its research, development, demonstration, testing, and evaluation (RDDT ampersand E) activities funded through the Western environmental Technology Office (WETO) in Butte, Montana. Technologies and processes described in this document have the potential to enhance DOE's cleanup and waste management efforts, as well as improve US industry's competitiveness in global environmental markets. The information presented in this document has been assembled from recently produced OST documents that highlight technology development activities within each of the OST program elements and Focus Areas. This document presents one in a series for each of DOE's Operations Office and Energy Technology Centers

  19. Residual stress in a thick section high strength T-butt weld

    International Nuclear Information System (INIS)

    Pearce, S.V.; Linton, V.M.; Oliver, E.C.

    2008-01-01

    Residual stresses in a structure are generated as a result of the various fabrication and welding processes used to make the component. Being able to quantify these residual stresses is a key step in determining the continuing integrity of a structure in service. In this work, the residual stresses around a high strength, quenched and tempered steel T-butt web to curved plate weld have been measured using neutron strain scanning. The results show that the residual stresses near the weld were dominated by the welding residual stresses, while the stresses further from the weld were dominated by the bending residual stresses. The results suggest that the combination of welding-induced residual stress and significant pre-welding residual stress, as in the case of a thick bent section of plate can significantly alter the residual stress profile from that in a flat plate

  20. A Study on the Saving Method of Plate Jigs in Hull Block Butt Welding

    Science.gov (United States)

    Ko, Dae-Eun

    2017-11-01

    A large amount of plate jigs is used for alignment of welding line and control of welding deformations in hull block assembly stage. Besides material cost, the huge working man-hours required for working process of plate jigs is one of the obstacles in productivity growth of shipyard. In this study, analysis method was proposed to simulate the welding deformations of block butt joint with plate jigs setting. Using the proposed analysis method, an example simulation was performed for actual panel block joint to investigate the saving method of plate jigs. Results show that it is possible to achieve two objectives of quality accuracy of the hull block and saving the plate jig usage at the same time by deploying the plate jigs at the right places. And the proposed analysis method can be used in establishing guidelines for the proper use of plate jigs in block assembly stage.

  1. Application of ultrasonic NDT technique for butt fusion joints of plastic pipes

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Tae Gyung; Lim, Hyung Taik; Choi, Jeong Guen; Lee, Jae Myung [ANSCO, Daejeon (Korea, Republic of)

    2016-05-15

    The long term-durability and the soundness of the plastic pipe have been sufficiently verified through use of the plastic pipe during the past several decades. Recently, as the pipe material have been constantly developed, the application of the plastic pipe is expanded to various industrial fields, such as an increase of a use pressure, the bigger diameter of the pipe, etc. In a nuclear power plant where a carbon steel pipe and a stainless steel pipe are mainly used as a safety class III buried pipe, safety in an operation is seriously threatened by abrasion, heat deterioration or the like, frequently generated in a metal pipe. Therefore, in order to provide an alternate to this problem there is a rising interest on using high-density polyethylene (HDPE) pipes which are known to provide much enhanced corrosion, abrasion and impact resistant properties. With polyethylene piping, one of the issue that is being looked into is the integrity of butt-fusion joint. At the present time the Referencing Code and Standard for the NDT technology of for butt fusion joint of the plastic pipe have not yet established. An optimum inspection parameters were determined according to the thickness of the HDPE pipe. It was also confirmed that most of the detection results of two techniques have matched with each other. In the PAUT, it is easy to distinguish signals with from the flaws made by the thin plate and the void. Also the resolving power of PAUT on the detection in the depth direction has been demonstrated to be satisfactory.

  2. Microstructure and mechanical properties of resistance upset butt welded 304 austenitic stainless steel joints

    International Nuclear Information System (INIS)

    Sharifitabar, M.; Halvaee, A.; Khorshahian, S.

    2011-01-01

    Graphical abstract: Three different microstructural zones formed at different distances from the joint interface in resistance upset butt welding of 304 austenitic stainless steel. Highlights: → Evaluation of microstructure in resistance upset welding of 304 stainless steel. → Evaluation of welding parameters effects on mechanical properties of the joint. → Introducing the optimum welding condition for joining stainless steel bars. -- Abstract: Resistance upset welding (UW) is a widely used process for joining metal parts. In this process, current, time and upset pressure are three parameters that affect the quality of welded products. In the present research, resistance upset butt welding of 304 austenitic stainless steel and effect of welding power and upset pressure on microstructure, tensile strength and fatigue life of the joint were investigated. Microstructure of welds were studied using scanning electron microscopy (SEM). X-ray diffraction (XRD) analysis was used to distinguish the phase(s) that formed at the joint interface and in heat affected zone (HAZ). Energy dispersive spectroscopy (EDS) linked to the SEM was used to determine chemical composition of phases formed at the joint interface. Fatigue tests were performed using a pull-push fatigue test machine and the fatigue properties were analyzed drawing stress-number of cycles to failure (S-N) curves. Also tensile strength tests were performed. Finally tensile and fatigue fracture surfaces were studied by SEM. Results showed that there were three different microstructural zones at different distances from the joint interface and delta ferrite phase has formed in these regions. There was no precipitation of chromium carbide at the joint interface and in the HAZ. Tensile and fatigue strengths of the joint decreased with welding power. Increasing of upset pressure has also considerable influence on tensile strength of the joint. Fractography of fractured samples showed that formation of hot spots at

  3. eeasa members opinion survey oogsa lede meningsopname

    African Journals Online (AJOL)

    Geen redes. 2. • 't·leeste daarvan' antwoorde : 32 redes is deur 24 respondente verskaf. t~ i e genoeg tyd n i e ( tyd verwante faktore). 10. Not a 11 articles ..... and social sciences. The journal should include articles that address awareness amongst groups like farmers, industrialists, administrators etc. Advertisements about ...

  4. CAUCE Institutional Members' Survey: A Snapshot

    Science.gov (United States)

    Carter, Lorraine; Taylor-O'Reilly, Tracey

    2009-01-01

    Continuing education in Canadian universities is currently at a type of crossroads. It is being affected by a number of factors, including recent changes in the economy; the different approaches universities are taking to continuing education, which range from centralized to decentralized models; and the blending of continuing education with areas…

  5. Evaluation of clinical trials by Ethics Committees in Germany – results and a comparison of two surveys performed among members of the German Association of Research-Based Pharmaceutical Companies (vfa

    Directory of Open Access Journals (Sweden)

    Russ, Hagen

    2015-01-01

    Full Text Available [english] Objective: The objective of this project was to evaluate the quality and quantity of initial applications for a clinical trial according to § 7 of the German Good Clinical Practice (GCP ordinance (German: GCP-Verordnung, GCP-V, the quality of evaluations of those applications by Ethics Committees (ECs/Investigational Review Boards (IRBs in Germany as well as the pattern of EC objections in their reasoned opinions (vote. In order to identify a change over time, the results of the present survey were also compared with a survey performed in 2008.Methods: Based on reasoned opinions issued by the respective EC in charge of the coordinating principle investigator (coordinating EC in 2011, a written survey among members of the German Association of Research-Based Pharmaceutical Companies (vfa was conducted in 2012. The answers to the questionnaire were analyzed descriptively. Since the data set collected in 2011 was structurally identical with the data set gained in 2007 both surveys were compared.Results: Of the 24 companies represented on the vfa Clinical Research/Quality Assurance Subcommittee, 75% (18 took part in the survey. Survey evaluation was based on a total of 251 applications of these 18 companies submitted to 43 ECs. These account for about 21% of 1,214 applications for authorization of commercial and non-commercial phase I–IV clinical trials submitted to the regulatory authorities (BfArM and PEI in 2011.In comparison to 2007, a lower amount of applications (n=251 in 2011 vs. n=288 in 2007 was submitted to a slightly higher number of ECs (43 in 2011 vs. 40 in 2007. The amount of objections increased by 21% from 1,299 (2007 to 1,574 (2011 resulting in an average of 4.5 (2007 vs. 6.3 (2011 objections per application. Overall, the analysis of both formal and content related objections revealed almost the same pattern as in the previous survey. In total, the most frequent objections applied to the patient information and consent

  6. Evaluation of clinical trials by Ethics Committees in Germany--results and a comparison of two surveys performed among members of the German Association of Research-Based Pharmaceutical Companies (vfa).

    Science.gov (United States)

    Russ, Hagen; Busta, Susanne; Jost, Bertfried; Bethke, Thomas D

    2015-01-01

    The objective of this project was to evaluate the quality and quantity of initial applications for a clinical trial according to § 7 of the German Good Clinical Practice (GCP) ordinance (German: GCP-Verordnung, GCP-V), the quality of evaluations of those applications by Ethics Committees (ECs)/Investigational Review Boards (IRBs) in Germany as well as the pattern of EC objections in their reasoned opinions (vote). In order to identify a change over time, the results of the present survey were also compared with a survey performed in 2008. Based on reasoned opinions issued by the respective EC in charge of the coordinating principle investigator (coordinating EC) in 2011, a written survey among members of the German Association of Research-Based Pharmaceutical Companies (vfa) was conducted in 2012. The answers to the questionnaire were analyzed descriptively. Since the data set collected in 2011 was structurally identical with the data set gained in 2007 both surveys were compared. Of the 24 companies represented on the vfa Clinical Research/Quality Assurance Subcommittee, 75% (18) took part in the survey. Survey evaluation was based on a total of 251 applications of these 18 companies submitted to 43 ECs. These account for about 21% of 1,214 applications for authorization of commercial and non-commercial phase I-IV clinical trials submitted to the regulatory authorities (BfArM and PEI) in 2011. In comparison to 2007, a lower amount of applications (n=251 in 2011 vs. n=288 in 2007) was submitted to a slightly higher number of ECs (43 in 2011 vs. 40 in 2007). The amount of objections increased by 21% from 1,299 (2007) to 1,574 (2011) resulting in an average of 4.5 (2007) vs. 6.3 (2011) objections per application. Overall, the analysis of both formal and content related objections revealed almost the same pattern as in the previous survey. In total, the most frequent objections applied to the patient information and consent form followed in descending order by trial

  7. An opinion survey of members of the Spanish Society of Environmental Health Encuesta de opinión de los socios de la Sociedad Española de Sanidad Ambiental

    Directory of Open Access Journals (Sweden)

    Pedro Pi Renart

    2012-08-01

    Full Text Available The aim of this study was to find out the profile of the members of SESA, their interests, concerns and professional requirements, as well as their level of satisfaction with the activities of the Society, so that these activities can be better adapted by the board to the needs of members.For this purpose, a questionnaire was prepared that included aspects relating to the profile of members and the activities undertaken by the society, as well as some technical and scientific matters. Analysis of the data obtained from this survey emphasized the need to rejuvenate the society, to diversify the professional profile of members and to strengthen the role of SESA in scientific and social life. In addition, the results also provided details about the activities that were most appreciated by the members, among which were conferences, technical seminars, the Journal and the Web page. El objetivo de este trabajo ha sido conocer el perfil de los socios de SESA, sus intereses, inquietudes y demandas profesionales, así como su grado de satisfacción con las actividades de la sociedad, para que estas se adecuen mejor a lo que los socios necesitan. Para ello se elaboró un cuestionario en el que se recogen aspectos relativos al perfil del asociado, a las actividades desarrolladas por la Sociedad así como a cuestiones de carácter técnico y científico. A continuación se presenta el resultado del análisis de los datos obtenidos, entre los que cabe destacar la necesidad de rejuvenecer la sociedad, de diversificar el perfil profesional de los asociados y de que SESA tenga una mayor presencia en la vida científica y social. También se detallan las actividades mejor valoradas por los socios, entre las que cabe destacar los congresos, las jornadas técnicas, la revista y la página Web.O objetivo deste estudo foi conhecer o perfil dos sócios da SESA, seus interesses, preocupações e demandas profissionais, bem como, o grau de satisfação relativamente

  8. Evaluation of clinical trials by Ethics Committees in Germany: Experience of applicants with the review of requests for opinion of the Ethics Committees - results of a survey among members of the German Association of Research-Based Pharmaceutical Companies (VFA

    Directory of Open Access Journals (Sweden)

    Russ, Hagen

    2009-07-01

    Full Text Available The review of requests for a positive opinion of the ethics committees (application procedure as a requirement to start a clinical trial in Germany has been completely redesigned with the transposition of EU Directive 2001/20/EC in the 12th Amendment of the German Medicines Act in August 2004. The experience of applicants (sponsors, legal representatives of sponsors in the EU and persons or organizations authorized by the sponsors to make the application, respectively in terms of interactions with the ethics committees in Germany has been positive overall, especially with respect to ethics committee adherence to the statutory timelines applicable for review of requests. However, inconsistencies between ethics committees exist in terms of the form and content of the requirements for application documents and their evaluation.With the objective of further improving both the quality of applications and the evaluation of those applications by ethics committees, a survey among members of the German Association of Research-Based Pharmaceutical Companies (VFA was conducted from January to April 2008. Based on reasoned opinions issued by the respective ethics committee in charge of the coordinating principal investigator (coordinating ethics committee, the type and frequency of formal and content-related objections to applications according to § 7 of the German Good Clinical Practice (GCP Regulation were systematically documented, and qualitative and quantitative analyses performed. 21 out of 44 members of the VFA participated in the survey. 288 applications for Phase I–IV studies submitted between January and December 2007 to 40 ethics committees were evaluated.This survey shows that about one in six applications is incomplete and has formal and/or content objections, respectively, especially those that pertain to documents demonstrating the qualification of the investigator and/or suitability of the facilities. These objections are attributable to

  9. 2015 Community Survey Data

    Data.gov (United States)

    Town of Chapel Hill, North Carolina — These are the answers to the 2015 Community Survey.A comprehensive summary of the survey results can be found here.The survey asked town members to address their...

  10. Effect of the weld groove shape and pass number on residual stresses in butt-welded pipes

    International Nuclear Information System (INIS)

    Sattari-Far, I.; Farahani, M.R.

    2009-01-01

    This study used finite element techniques to analyze the thermo-mechanical behaviour and residual stresses in butt-welded pipes. The residual stresses were also measured in some welds by using the Hole-Drilling method. The results of the finite element analysis were compared with experimentally measured data to evaluate the accuracy of the finite element modelling. Based on this study, a finite element modelling procedure with reasonable accuracy was developed. The developed FE modelling was used to study the effects of weld groove shape and weld pass number on welding residual stresses in butt-welded pipes. The hoop and axial residual stresses in pipe joints of 6 and 10 mm thickness of different groove shapes and pass number were studied. It is shown that these two parameters may have significant effects on magnitude and distribution of residual stresses in welded pipes.

  11. Busted Butte Phase 2: Introduction and Analytical Modeling of Nonreactive Tracer and Lithium Breakthrough

    International Nuclear Information System (INIS)

    Turin, H.J.; Soll, W.E.

    2002-01-01

    The Busted Butte Unsaturated-Zone Transport Test Facility is located approximately 8 km southeast of Yucca Mountain, and was designed to address uncertainties associated with flow and transport in the UZ site-process models for Yucca Mountain. Busted Butte Phase 2 consisted of a 10m x 10m x 7m test block. From July 1988 through October 2000, complex tracer mixtures were injected continuously at 77 discrete points located along eight parallel 10-m boreholes arranged in two horizontal planes. In August 1999, iodide was added to the tracer mixture to explore the effects of initial hydraulic transients. During the course of the experiment, porewater samples were collected at regular intervals using sorbing-paper collection pads, emplaced into fifteen horizontal and inclined 10-m collection boreholes, oriented perpendicular to the injection boreholes. Potential travel distances ranged from 20 cm to over 500 cm. Nonreactive tracer and weakly sorbing lithium breakthrough was observed at most of the collection points during the injection period. Following termination of injection, approximately 800 rock samples were collected using overcore and mineback techniques, and analyzed for tracer concentration. Rock analyses are discussed in a subsequent paper. To complement complex 3-dimensional finite-element modeling of the entire block, bromide, iodide, and lithium breakthrough onto the collection pads has been modeled with CXTFIT. This simple 1-dimensional analytical code uses a non-linear curve-fitting routine to estimate transport parameters including apparent velocity, dispersivity, and field retardation factors. Preliminary results show that: (1) Bromide and iodide behaved similarly, despite the fact that bromide was injected in a strongly transient flow field, while iodide injection began after flow had approached steady state conditions. (2) With the exception of the closest collection points, tracer velocities remained relatively constant, indicating that transport was

  12. Wired for success: A history of the Butte, Anaconda & Pacific Railway, 1892--1985

    Science.gov (United States)

    Mutschler, Charles Vincent

    The Butte, Anaconda & Pacific Railway (BA&P) was a standard gauge common carrier short line railroad within the state of Montana. A subsidiary of the Anaconda Copper Mining Company, the BA&P was built to carry ore from mines at Butte, Montana to Anaconda, twenty-six miles away, for concentrating and smelting. Other freight and passenger business was of secondary importance. In 1912, when General Electric contracted to convert the BA&P from steam to electric operation, the short line became a proving ground for main line railroad electrification, and the center of attention from advocates for electric power. Electric operation was demonstrated to be mechanically superior to the use of steam locomotives on the BA&P. Immediately after the BA&P proved the technological feasibility of high voltage direct current for moving heavy freight trains, the Chicago Milwaukee & St. Paul (CM&St.P) electrified over 600 miles of transcontinental main line using the basic technology demonstrated on the BA&P. However, on long distances of track with relatively few trains such as the CM&St.P, the capital cost of the electric distribution system exceeded the operational savings obtained by use of electric locomotives. Steam locomotives remained the primary form of railroad motive power in the United States until the 1950's, when the diesel-electric locomotive combined the mechanical efficiency of electric motors with an on-board diesel generating plant, eliminating the need for expensive electric power supply and distribution wires of conventional electrics. The BA&P purchased three diesels in the early 1950's, but relied primarily on its electric locomotives until 1967, when diesel operation became less costly than continued use of electric motive power. The BA&P offers a microcosmic view of the transformation of one industry in response to technological and economic forces as the United States moved from reliance on coal-burning steam power to electric power and internal combustion

  13. A Semi-analytical model for creep life prediction of butt-welded joints in cylindrical vessels

    International Nuclear Information System (INIS)

    Zarrabi, K.

    2001-01-01

    There have been many investigations on the life assessment of high temperature weldments used in cylindrical pressure vessels, pipes and tubes over the last two decades or so. But to the author's knowledge, currently, there exists no practical, economical and relatively accurate model for creep life assessment of butt-welded joints in cylindrical pressure vessels. This paper describes a semi-analytical and economical model for creep life assessment of butt-welded joints. The first stage of the development of the model is described where the model takes into account the material discontinuities at the welded joint only. The development of the model to include other factors such as geometrical stress concentrations, residual stresses, etc will be reported separately. It has been shown that the proposed model can estimate the redistributions of stresses in the weld and Haz with an error of less than 4%. It has also been shown that the proposed model can conservatively predict the creep life of a butt-welded joint with an error of less than 16%

  14. A Study on the compensation margin on butt welding joint of Large Steel plates during Shipbuilding construction

    International Nuclear Information System (INIS)

    Kim, J; Jeong, K; Chung, H; Jeong, H; Ji, M; Yun, C; Lee, J

    2015-01-01

    This paper examines the characteristics of butt welding joint shrinkage for shipbuilding and marine structures main plate. The shrinkage strain of butt welding joint which is caused by the process of heat input and cooling, results in the difference between dimensions of the actual parent metal and the dimensions of design. This, in turn, leads to poor quality in the production of ship blocks and reworking through period of correction brings about impediment on improvement of productivity. Through experiments on butt welding joint's shrinkage strain on large structures main plate, the deformation of welding residual stress in the form of I, Y, V was obtained. In addition, the results of experiments indicate that there is limited range of shrinkage in the range of 1 ∼ 2 mm in 11t ∼ 21.5t thickness and the effect of heat transfer of weld appears to be limited within 1000 mm based on one side of seam line so there was limited impact of weight of parent metal on the shrinkage. Finally, it has been learned that Shrinkage margin needs to be applied differently based on groove phenomenon in the design phase in order to minimize shrinkage. (paper)

  15. Petrographic Analysis and Geochemical Source Correlation of Pigeon Peak, Sutter Buttes, CA

    Science.gov (United States)

    Novotny, N. M.; Hausback, B. P.

    2013-12-01

    The Sutter Buttes are a volcanic complex located in the center of the Great Valley north of Sacramento. They are comprised of numerous inter-intruding andesite and rhyolite lava domes of varying compositions surrounded by a shallow rampart of associated tephras. The Pigeon Peak block-and-ash flow sequence is located in the rampart and made up of a porphyritic Biotite bearing Hornblende Andesite. The andesite blocks demonstrate a high degree of propylization in hornblende crystals, highly zoned plagioclase, trace olivine, and display a red to gray color gradation. DAR is an andesite dome located less than one mile from Pigeon Peak. Of the 15 to 25 andesite lava domes within four miles from Pigeon Peak, only DAR displays trace olivine, red to grey color stratification, low biotite content, and propylitized hornblende. These characteristic similarities suggest that DAR may be the source for Pigeon Peak. My investigation used microprobe analysis of the DAR and Pigeon Peak feldspar crystals to identify the magmatic history of the magma body before emplacement. Correlation of the anorthite zoning within the feldspars from both locations support my hypothesis that DAR is the source of the Pigeon Peak block-and-ash flow.

  16. IE Information No. 86-104: Unqualified butt splice connectors identified in qualified penetrations

    International Nuclear Information System (INIS)

    Jordan, E.L.

    1992-01-01

    During an NRC equipment qualification (EQ) inspection at Dresden Nuclear Power Station, May 19--23, 1986, a deficiency was discovered concerning a lack of similarity between tested and installed nylon insulated butt splices in EQ qualified GE electrical penetrations. commonwealth Edison sent four sample splices removed from Quad Cities Nuclear Power Station to Wyle Laboratory to further substantiate their qualification for use in a harsh environment. These splices were identical to those installed at Dresden. During the testing performed at Wyle Laboratory December 4--5, 1986, all four samples exhibited excessive leakage currents to ground when exposed to a steam environment. Commonwealth Edison consequently declared the splices unqualified and shut down its Quad Cities Unit 1 to rework the splices by wrapping them with previously qualified tape. Dresden Unit 2 has similarly reworked the splices by wrapping them with tape. Duane Arnold Energy Center also has commenced a shutdown in order to make repairs. The short circuits that occurred appeared to start by condensation entering the splice between the wire insulation and the nylon tubing. The arcing caused insulation degradation that then allowed arcs to pass through the insulation to the enclosure

  17. Requirements to gap widths and clamping for CO2 laser butt welding

    DEFF Research Database (Denmark)

    Gong, Hui; Juhl, Thomas Winther

    1999-01-01

    In the experimental study of fixturing and gap width requirements a clamping device for laser butt welding of steel sheets has been developed and tested. It has fulfilled the work and made the gap width experiments possible.It has shown that the maximum allowable gap width to some extent...... is inversely related to the welding speed. Also larger laser power leads to bigger allowable gap widths. The focal point position, though, has little influence on the maximum allowable gap width.During analysis X-ray photos show no interior porosity in the weld seam. Other methods have been applied to measure...... responses from variations in welding parameters.The table below lists the results of the study, showing the maximum allowable gap widths and some corresponding welding parameters.Maximum allowable Gap Width; Welding Speed; Laser Power:0.10 mm2 m/min2, 2.6 kW0.15 mm1 m/min2 kW0.20 mm1 m/min2.6 kW0.30 mm0.5 m...

  18. Characterization of magnetically impelled arc butt welded T11 tubes for high pressure applications

    Directory of Open Access Journals (Sweden)

    R. Sivasankari

    2015-09-01

    Full Text Available Magnetically impelled arc butt (MIAB welding is a pressure welding process used for joining of pipes and tubes with an external magnetic field affecting arc rotation along the tube circumference. In this work, MIAB welding of low alloy steel (T11 tubes were carried out to study the microstructural changes occurring in thermo-mechanically affected zone (TMAZ. To qualify the process for the welding applications where pressure could be up to 300 bar, the MIAB welds are studied with variations of arc current and arc rotation time. It is found that TMAZ shows higher hardness than that in base metal and displays higher weld tensile strength and ductility due to bainitic transformation. The effect of arc current on the weld interface is also detailed and is found to be defect free at higher values of arc currents. The results reveal that MIAB welded samples exhibits good structural property correlation for high pressure applications with an added benefit of enhanced productivity at lower cost. The study will enable the use of MIAB welding for high pressure applications in power and defence sectors.

  19. Spectral image analysis of the Hopi Buttes volcanic field, Arizona, U.S.A

    International Nuclear Information System (INIS)

    Gabelman, J.W.; Wescott, T.F.

    1987-01-01

    The possibility of economic deposits, the semi-arid environment and the youth of applied remote-sensing technology suit the Hopi Buttes volcanic field as a test site for the application of multispectral image analysis to geologic interpretation and uranium evaluation. All possible enhancements of seasonal images were created in the General Electric interactive multispectral analyzer, model 100, and photographed for study. Contrast and directional edge-enhancement excellently delineated the patterns of megafractures and lineaments which are obscure to ground observation, but may control vent positions. Two sets of orthogonal groups of megafractures are oriented in the cardinal and diagonal directions; they suggest rotation of the stress ellipsoid, or the overlap of stresses from a differently oriented ellipsoid in a neighboring region. A megacircle of vents suggests a deep cylindrical fracture zone and possible incipient cauldron. Other circular areas with unusually abundant travertine maars or volcanic-material-free pipes suggest incipient collapse. Band ratios, density slices and histogram stretches selectively enhanced and differentiated stratigraphic formations, limburgite, tuff, travertine, gypsum-argillized rock and Fe-enriched rock. These were portrayed successfully on thematic map-images. A signature was derived for uraniferous travertine-marl and used to map its distribution. 30 refs.; 24 figs

  20. Identifying Variations in Hydraulic Conductivity on the East River at Crested Butte, CO

    Science.gov (United States)

    Ulmer, K. N.; Malenda, H. F.; Singha, K.

    2016-12-01

    Slug tests are a widely used method to measure saturated hydraulic conductivity, or how easily water flows through an aquifer, by perturbing the piezometric surface and measuring the time the local groundwater table takes to re-equilibrate. Saturated hydraulic conductivity is crucial to calculating the speed and direction of groundwater movement. Therefore, it is important to document data variance from in situ slug tests. This study addresses two potential sources of data variability: different users and different types of slug used. To test for user variability, two individuals slugged the same six wells with water multiple times at a stream meander on the East River near Crested Butte, CO. To test for variations in type of slug test, multiple water and metal slug tests were performed at a single well in the same meander. The distributions of hydraulic conductivities of each test were then tested for variance using both the Kruskal-Wallis test and the Brown-Forsythe test. When comparing the hydraulic conductivity distributions gathered by the two individuals, we found that they were statistically similar. However, we found that the two types of slug tests produced hydraulic conductivity distributions for the same well that are statistically dissimilar. In conclusion, multiple people should be able to conduct slug tests without creating any considerable variations in the resulting hydraulic conductivity values, but only a single type of slug should be used for those tests.

  1. Simulation and experimental study on distortion of butt and T-joints using WELD PLANNER

    International Nuclear Information System (INIS)

    Sulaiman, Mohd Shahar; Manurung, Yupiter HP; Rahim, Mohammad Ridzwan Abdul Mohd; Redza, Ridhwan; Lidam, Robert Ngendang Ak.; Abas, Sunhaji Kiyai; Tham, Ghalib; Haruman, Esa; Chau, Chan Yin

    2011-01-01

    This paper investigates the capability of linear thermal elastic numerical analysis to predict the welding distortion that occurs due to GMAW process. Distortion is considered as the major stumbling block that can adversely affect the dimensional accuracy and thus lead to expensive corrective work. Hence, forecast of distortion is crucially needed and ought to be determined in advance in order to minimize the negative effects, improve the quality of welded parts and finally to reduce the production costs. In this study, the welding deformation was simulated by using relatively new FEM software WELD PLANNER developed by ESI Group. This novel Welding Simulation Solution was employed to predict welding distortion induced in butt and T-joints with thickness of 4 mm. Low carbon steel material was used for the simulation and experimental study. A series of experiments using fully automated welding process were conducted for verification purpose to measure the distortion. By comparing between the simulation and experimental results, it was found out that this program code offered fast solution analysis time in estimating weld induced distortion within acceptable accuracy

  2. Simulation and experimental study on distortion of butt and T-joints using WELD PLANNER

    Energy Technology Data Exchange (ETDEWEB)

    Sulaiman, Mohd Shahar; Manurung, Yupiter HP; Rahim, Mohammad Ridzwan Abdul Mohd; Redza, Ridhwan; Lidam, Robert Ngendang Ak.; Abas, Sunhaji Kiyai; Tham, Ghalib [Universiti Teknologi MARA, Kuala Lumpur (Malaysia); Haruman, Esa [Bakrie University, Jakarta (Indonesia); Chau, Chan Yin [ESI Group, Kuala Lumpur (Malaysia)

    2011-10-15

    This paper investigates the capability of linear thermal elastic numerical analysis to predict the welding distortion that occurs due to GMAW process. Distortion is considered as the major stumbling block that can adversely affect the dimensional accuracy and thus lead to expensive corrective work. Hence, forecast of distortion is crucially needed and ought to be determined in advance in order to minimize the negative effects, improve the quality of welded parts and finally to reduce the production costs. In this study, the welding deformation was simulated by using relatively new FEM software WELD PLANNER developed by ESI Group. This novel Welding Simulation Solution was employed to predict welding distortion induced in butt and T-joints with thickness of 4 mm. Low carbon steel material was used for the simulation and experimental study. A series of experiments using fully automated welding process were conducted for verification purpose to measure the distortion. By comparing between the simulation and experimental results, it was found out that this program code offered fast solution analysis time in estimating weld induced distortion within acceptable accuracy.

  3. Assessment of role of metamorphic remobilization in genesis of uranium ores from Ralston Buttes area, Colorado

    International Nuclear Information System (INIS)

    Chatterjee, S.K.

    1984-01-01

    The Ralston Buttes mining district, the principal source of commercial uranium in the Front Range since the late 1940s, is located northeast of Golden and southeast of the Front Range mineral belt. Uranium ore occurs in veins emplaced in fault breccia in Precambrian metamorphic rocks. The progenitors of the metamorphic rocks are a possible source for the uranium. Hornblende gneisses of the Idaho Springs Formation is the major rock type in the area, thus its origin is a major consideration in assessing the quantity of uranium that might have been contributed by metamorphic processes. To evaluate this, 41 rock samples (19 hornblende gneisses, 7 biotite gneisses, 5 chlorite gneisses, and 10 metapelites) were analyzed for major elements, and 3 rock samples (16 hornblende gneisses, 8 biotite gneisses, 4 chlorite gneisses, and 5 mica schists) were analyzed for trace metals (Rb, Sc, Zr, V, Ni, Co, Cr, Ba, U, and Th). Four samples of hornblende gneiss and 1 sample of mica schists were also analyzed for rare earth elements. Major elements are rare earth data indicate that the hornblende gneiss was derived from sediments and tholeiitic basalts. Trace element data suggest a volcanic provenance for these sediments. Rare earth patterns and uranium and thorium abundances of metapelites are similar to average North American shales. Low uranium and thorium values and low thorium-uranium ratios in hornblende gneisses and mica schists preclude large-scale uranium remobilization during metamorphism of these source rocks

  4. The influence of stigma on first aid actions taken by young people for mental health problems in a close friend or family member: findings from an Australian national survey of youth.

    Science.gov (United States)

    Yap, Marie Bee Hui; Jorm, Anthony Francis

    2011-11-01

    Young people are an important source of first aid for mental health problems in people they are close to, but their first aid skills remain inadequate. Research into the factors that influence mental health first aid skills are required to reveal targets for improving these skills. This study examined the influence of stigma on first aid actions taken by young people to help someone close to them with a mental health problem. Participants in a national telephone survey of Australian youth (aged 12-25 years) reported on their stigmatising attitudes based on one of three disorders in vignettes: depression, depression with alcohol misuse, and social phobia. At a two-year follow-up interview, they were asked if they knew a family member or close friend with a problem similar to the vignette character since the initial interview, and those who did reported on the actions taken to help the person. Of the 1520 participants interviewed at follow up, 507 reported knowing someone with a similar problem. Young people's stigmatising attitudes (weak-not-sick, social distance and dangerousness/unpredictability) influenced their first aid actions. Social desirability could have affected the assessment of stigma, we could not assess the severity of the first aid recipient's problem or the benefit derived from the first aid provided, and the proportion of variance explained was modest. Reducing stigma may help to improve the first aid that people with mental health problems can receive from young people who are close to them. Copyright © 2011 Elsevier B.V. All rights reserved.

  5. Perspectives on Tobacco Product Waste: A Survey of Framework Convention Alliance Members’ Knowledge, Attitudes, and Beliefs

    Directory of Open Access Journals (Sweden)

    Sanas Javadian

    2015-08-01

    Full Text Available Cigarette butts (tobacco product waste (TPW are the single most collected item in environmental trash cleanups worldwide. This brief descriptive study used an online survey tool (Survey Monkey to assess knowledge, attitudes, and beliefs among individuals representing the Framework Convention Alliance (FCA about this issue. The FCA has about 350 members, including mainly non-governmental tobacco control advocacy groups that support implementation of the World Health Organization’s (WHO Framework Convention on Tobacco Control (FCTC. Although the response rate (28% was low, respondents represented countries from all six WHO regions. The majority (62% have heard the term TPW, and nearly all (99% considered TPW as an environmental harm. Most (77% indicated that the tobacco industry should be responsible for TPW mitigation, and 72% felt that smokers should also be held responsible. This baseline information may inform future international discussions by the FCTC Conference of the Parties (COP regarding environmental policies that may be addressed within FCTC obligations. Additional research is planned regarding the entire lifecycle of tobacco’s impact on the environment.

  6. Method for strength calculating of structural elements of mobile machines for flash butt welding of rails

    Directory of Open Access Journals (Sweden)

    Andriy Valeriy Moltasov

    2017-12-01

    Full Text Available Purpose. The subject of this study is the strength of the loaded units of mobile machines for flash butt welding by refining high-strength rails. The theme of the work is related to the development of a technique for strength calculating of the insulation of the central axis of these machines. The aim of the paper is to establish the mathematical dependence of the pressure on the insulation on the magnitude of deflections of the central axis under the action of the upset force. Design/methodology/approach. Using the Mohr’s method, the displacements of the investigated sections of the central axis under the action of the upset force and the equivalent load distributed along the length of the insulation were calculated. The magnitude of the load distributed along the length of the insulation equivalent to the draft force was determined from the condition that the displacements of the same cross sections are equal under the action of this load and under the action of the upset force. Results. An analytical expression for establishing the relationship between the pressure acting on the insulation and the magnitude of the upset force and the geometric dimensions of the structural elements of the machine was obtained. Based on the condition of the strength of the insulation for crushing, an analytical expression for establishing the relationship between the length of insulation and the size of the upset force, the geometric dimensions of the structural elements of the machine, and the physical and mechanical properties of the insulation material was obtained. Originality/cost. The proposed methodology was tested in the calculation and design of the K1045 mobile rail welding machine, 4 of which is currently successfully used in the USA for welding rails in hard-to-reach places.

  7. Unravelling the magmatic system beneath a monogenetic volcanic complex (Jagged Rocks Complex, Hopi Buttes, AZ, USA)

    Science.gov (United States)

    Re, G.; Palin, J. M.; White, J. D. L.; Parolari, M.

    2017-12-01

    The Jagged Rocks complex is the eroded remnant of the plumbing systems of closely spaced monogenetic alkaline volcanic centres in the southern Hopi Buttes Volcanic Field (AZ, USA). It contains different clinopyroxene populations with distinctive textures and geochemical patterns. In the Northwestern part of the complex, which exposes the best developed system of conduits, most of the clinopyroxenes consist of large- to medium-sized resorbed cores overgrown by euhedral rims (type 1), small moderately resorbed greenish cores with the same overgrown rims (type 2), and phlogopite as an accessory phase. By contrast, in the Southern part of the complex the majority of clinopyroxenes are euhedral with oscillatory zonation (type 3) and are accompanied by minor euhedral olivine. The differences between these mineral assemblages indicate a composite history of crystallization and magmatic evolution for the two parts of the complex, governed by different mechanisms and ascent patterns from a single source at 50 km depth (16 kbar). The Northwest system preserves a high-pressure assemblage that cooled rapidly from near-liquidus conditions, suggesting direct ascent from the source to the surface at high-to-moderate transport rates (average 1.25 m/s). By contrast, the Southern system represents magma that advanced upward at much lower overall ascent rates, stalling at times to form small-volume mid-crustal storage zones (e.g., sills or a network of sheeted intrusions); this allowed the re-equilibration of the magma at lower pressure ( 30 km; 8 kbar), and led to nucleation and growth of euhedral clinopyroxene and olivine phenocrysts.

  8. Mental Wellbeing of Family Members of Autistic Adults

    Science.gov (United States)

    Herrema, Renske; Garland, Deborah; Osborne, Malcolm; Freeston, Mark; Honey, Emma; Rodgers, Jacqui

    2017-01-01

    Family members are often the primary caregiver for autistic adults and this responsibility may impact on the carer's wellbeing and quality of life. 109 family members of autistic adults completed an online survey assessing their wellbeing relating to their caring role for their autistic relative. Family members who were supporting an autistic…

  9. Family Members' Reports of the Technology Use of Family Members with Intellectual and Developmental Disabilities

    Science.gov (United States)

    Palmer, S. B.; Wehmeyer, M. L.; Davies, D. K.; Stock, S. E.

    2012-01-01

    Background: A nationwide survey of family members of people with intellectual and developmental disabilities ranging in age from birth through adulthood was conducted to replicate a similar effort by Wehmeyer and update the knowledge base concerning technology use by people with intellectual and developmental disabilities. Method: Survey responses…

  10. A novel weld seam detection method for space weld seam of narrow butt joint in laser welding

    Science.gov (United States)

    Shao, Wen Jun; Huang, Yu; Zhang, Yong

    2018-02-01

    Structured light measurement is widely used for weld seam detection owing to its high measurement precision and robust. However, there is nearly no geometrical deformation of the stripe projected onto weld face, whose seam width is less than 0.1 mm and without misalignment. So, it's very difficult to ensure an exact retrieval of the seam feature. This issue is raised as laser welding for butt joint of thin metal plate is widely applied. Moreover, measurement for the seam width, seam center and the normal vector of the weld face at the same time during welding process is of great importance to the welding quality but rarely reported. Consequently, a seam measurement method based on vision sensor for space weld seam of narrow butt joint is proposed in this article. Three laser stripes with different wave length are project on the weldment, in which two red laser stripes are designed and used to measure the three dimensional profile of the weld face by the principle of optical triangulation, and the third green laser stripe is used as light source to measure the edge and the centerline of the seam by the principle of passive vision sensor. The corresponding image process algorithm is proposed to extract the centerline of the red laser stripes as well as the seam feature. All these three laser stripes are captured and processed in a single image so that the three dimensional position of the space weld seam can be obtained simultaneously. Finally, the result of experiment reveals that the proposed method can meet the precision demand of space narrow butt joint.

  11. In-process monitoring and adaptive control for gap in micro butt welding with pulsed YAG laser

    International Nuclear Information System (INIS)

    Kawahito, Yousuke; Kito, Masayuki; Katayama, Seiji

    2007-01-01

    A gap is one of the most important issues to be solved in laser welding of a micro butt joint, because the gap results in welding defects such as underfilling or a non-bonded joint. In-process monitoring and adaptive control has been expected as one of the useful procedures for the stable production of sound laser welds without defects. The objective of this research is to evaluate the availability of in-process monitoring and adaptive control in micro butt welding of pure titanium rods with a pulsed neodymium : yttrium aluminium garnet (Nd : YAG) laser beam of a 150 μm spot diameter. It was revealed that a 45 μm narrow gap was detected by the remarkable jump in a reflected light intensity due to the formation of the molten pool which could bridge the gap. Heat radiation signal levels increased in proportion to the sizes of molten pools or penetration depths for the respective laser powers. As for adaptive control, the laser peak power was controlled on the basis of the reflected light or the heat radiation signals to stably produce a sound deeply penetrated weld reduced underfilling. In the case of a 100 μm gap, the underfilling was greatly reduced by half smaller than those made with a conventional rectangular pulse shape in seam welding as well as spot welding with a pulsed Nd : YAG laser beam. Consequently, the adaptive control of the laser peak power on the basis of in-process monitoring could reduce the harmful effects due to a gap in micro butt laser welding with a pulsed laser beam

  12. Monogenetic volcanoes fed by interconnected dikes and sills in the Hopi Buttes volcanic field, Navajo Nation, USA

    Science.gov (United States)

    Muirhead, James D.; Van Eaton, Alexa R.; Re, Giuseppe; White, James D. L.; Ort, Michael H.

    2016-01-01

    Although monogenetic volcanic fields pose hazards to major cities worldwide, their shallow magma feeders (networks. Analysis of vent alignments using the pyroclastic massifs and other eruptive centers (e.g., maar-diatremes) shows a NW-SE trend, parallel to that of dikes in the region. We therefore infer that dikes fed many of the eruptions. Dikes are also observed in places transforming to transgressive (ramping) sills. Estimates of the observable volume of dikes (maximum volume of 1.90 × 106 m3) and sills (minimum volume of 8.47 × 105 m3) in this study reveal that sills at Hopi Buttes make up at least 30 % of the shallow intruded volume (∼2.75 × 106 m3 total) within 350 m of the paeosurface. We have also identified saucer-shaped sills, which are not traditionally associated with monogenetic volcanic fields. Our study demonstrates that shallow feeders in monogenetic fields can form geometrically complex networks, particularly those intruding poorly consolidated sedimentary rocks. We conclude that the Hopi Buttes eruptions were primarily fed by NW-SE-striking dikes. However, saucer-shaped sills also played an important role in modulating eruptions by transporting magma toward and away from eruptive conduits. Sill development could have been accompanied by surface uplifts on the order of decimeters. We infer that the characteristic feeder systems described here for the Hopi Buttes may underlie monogenetic fields elsewhere, particularly where magma intersects shallow, and often weak, sedimentary rocks. Results from this study support growing evidence of the important role of shallow sills in active monogenetic fields.

  13. Butt pressure welding of wheels from vehicles consisting of steel and aluminium; Pressstumpfschweissen von Fahrzeugraedern aus Stahl und Aluminium

    Energy Technology Data Exchange (ETDEWEB)

    Grobelin, K. [Hess Engineering AG, Frauenfeld (Switzerland)

    2001-07-01

    Every year in Europe 35 million wheels for vehicles are produced. Most of them are wheels consisting of metal tapes, both of steel and of aluminium alloys. The manufacturing of wheels is explained, in detail the method known as DC upset welding used for butt joints of wheel-rims. The engaged machinery, the specials of welding various materials, the limits of the method, and the quality assurance are discussed. Advantages of the applied method are joints of first-class quality, high productivity, energy saving and environmental cleanness. (orig.)

  14. Control of Precambrian basement deformation zones on emplacement of the Laramide Boulder batholith and Butte mining district, Montana, United States

    Science.gov (United States)

    Berger, Byron R.; Hildenbrand, Thomas G.; O'Neill, J. Michael

    2011-01-01

    What are the roles of deep Precambrian basement deformation zones in the localization of subsequent shallow-crustal deformation zones and magmas? The Paleoproterozoic Great Falls tectonic zone and its included Boulder batholith (Montana, United States) provide an opportunity to examine the importance of inherited deformation fabrics in batholith emplacement and the localization of magmatic-hydrothermal mineral deposits. Northeast-trending deformation fabrics predominate in the Great Falls tectonic zone, which formed during the suturing of Paleoproterozoic and Archean cratonic masses approximately 1,800 mega-annum (Ma). Subsequent Mesoproterozoic to Neoproterozoic deformation fabrics trend northwest. Following Paleozoic through Early Cretaceous sedimentation, a Late Cretaceous fold-and-thrust belt with associated strike-slip faulting developed across the region, wherein some Proterozoic faults localized thrust faulting, while others were reactivated as strike-slip faults. The 81- to 76-Ma Boulder batholith was emplaced along the reactivated central Paleoproterozoic suture in the Great Falls tectonic zone. Early-stage Boulder batholith plutons were emplaced concurrent with east-directed thrust faulting and localized primarily by northwest-trending strike-slip and related faults. The late-stage Butte Quartz Monzonite pluton was localized in a northeast-trending pull-apart structure that formed behind the active thrust front and is axially symmetric across the underlying northeast-striking Paleoproterozoic fault zone, interpreted as a crustal suture. The modeling of potential-field geophysical data indicates that pull-apart?stage magmas fed into the structure through two funnel-shaped zones beneath the batholith. Renewed magmatic activity in the southern feeder from 66 to 64 Ma led to the formation of two small porphyry-style copper-molybdenum deposits and ensuing world-class polymetallic copper- and silver-bearing veins in the Butte mining district. Vein orientations

  15. A Methodology for the Assessment of Unconventional (Continuous) Resources with an Application to the Greater Natural Buttes Gas Field, Utah

    International Nuclear Information System (INIS)

    Olea, Ricardo A.; Cook, Troy A.; Coleman, James L.

    2010-01-01

    The Greater Natural Buttes tight natural gas field is an unconventional (continuous) accumulation in the Uinta Basin, Utah, that began production in the early 1950s from the Upper Cretaceous Mesaverde Group. Three years later, production was extended to the Eocene Wasatch Formation. With the exclusion of 1100 non-productive ('dry') wells, we estimate that the final recovery from the 2500 producing wells existing in 2007 will be about 1.7 trillion standard cubic feet (TSCF) (48.2 billion cubic meters (BCM)). The use of estimated ultimate recovery (EUR) per well is common in assessments of unconventional resources, and it is one of the main sources of information to forecast undiscovered resources. Each calculated recovery value has an associated drainage area that generally varies from well to well and that can be mathematically subdivided into elemental subareas of constant size and shape called cells. Recovery per 5-acre cells at Greater Natural Buttes shows spatial correlation; hence, statistical approaches that ignore this correlation when inferring EUR values for untested cells do not take full advantage of all the information contained in the data. More critically, resulting models do not match the style of spatial EUR fluctuations observed in nature. This study takes a new approach by applying spatial statistics to model geographical variation of cell EUR taking into account spatial correlation and the influence of fractures. We applied sequential indicator simulation to model non-productive cells, while spatial mapping of cell EUR was obtained by applying sequential Gaussian simulation to provide multiple versions of reality (realizations) having equal chances of being the correct model. For each realization, summation of EUR in cells not drained by the existing wells allowed preparation of a stochastic prediction of undiscovered resources, which range between 2.6 and 3.4 TSCF (73.6 and 96.3 BCM) with a mean of 2.9 TSCF (82.1 BCM) for Greater Natural Buttes

  16. 3-D Characteristics of the Residual Stress in the Plate Butt Weld Between SA508 and F316L SS

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kyoung Soo; Kim, Tae Ryong [Korea Electric Power Research Institute, Daejeon (Korea, Republic of); Park, Jai Hak [Chungbuk National University, Cheongju (Korea, Republic of); Kim, Man Won [GNEC, Daejeon (Korea, Republic of); Cho, Seon Yeong [KLES, Daejeon (Korea, Republic of)

    2009-04-15

    This study is performed to check the three dimensional characteristics of residual stress in the dissimilar metal weld. Although two dimensional analysis has been widely used for the assessment of weld residual stress, it has limitations to understand the stress distribution of the third direction. 3-D analysis was done to understand residual stress distribution of the welded plate. A simple butt-welded plate was considered to show the stress variation on all direction. A mock-up plate weldment was fabricated with SA-508 and F316L, which are widely used in nuclear power plants. The analysis results were validated with the measured values in the mock-up.

  17. Integrated FEM-DBEM simulation of crack propagation in AA2024-T3 FSW butt joints considering manufacturing effects

    DEFF Research Database (Denmark)

    Sonne, Mads Rostgaard; Carlone, P.; Citarella, R.

    2015-01-01

    This paper deals with a numerical and experimental investigation on the influence of residual stresses on fatigue crack growth in AA2024-T3 friction stir welded butt joints. An integrated FEM-DBEM procedure for the simulation of crack propagation is proposed and discussed. A numerical FEM model...... of the welding process of precipitation hardenable AA2024-T3 aluminum alloy is employed to infer the process induced residual stress field. The reliability of the FEM simulations with respect to the induced residual stresses is assessed comparing numerical outcomes with experimental data obtained by means...

  18.  Ischemic Stroke Secondary to Aortic Dissection Following Rifle Butt Recoil Chest Injury: A Case Report

    Directory of Open Access Journals (Sweden)

    John Valiath

    2011-11-01

    Full Text Available  Ischemic stroke secondary to aortic dissection is not uncommon. We present a patient with left hemiplegia secondary to Stanford type A aortic dissection extending to the supra-aortic vessels, which was precipitated by rifle butt recoil chest injury. The diagnosis of aortic dissection was delayed due to various factors. Finally, the patient underwent successful Bentall procedure with complete resolution of symptoms. This case emphasizes the need for caution in the use of firearms for recreation and to take precautions in preventing such incidents. In addition, this case illustrates the need for prompt cardiovascular physical examination in patients presenting with stroke.

  19. Tool material effect on the friction stir butt welding of AA2124-T4 Alloy Matrix MMC

    Directory of Open Access Journals (Sweden)

    Yahya Bozkurt

    2018-01-01

    Full Text Available The purpose of the present work is to study on the effect of material properties tool on friction stir butt welding of AA2124-T4 alloy matrix MMC. Uncoated tool, coated tool with a CrN, and coated tool with AlTiN were used to weld aluminum MMC plates. Macrostructure and microstructure observations, ultimate tensile strength, wear resistance, and chemical analysis were carried out to determine the appropriate tool for joining these composite plates. Results showed that the good welded joints could be obtained when a tool is coated with AlTiN.

  20. Aluminum 6060-T6 friction stir welded butt joints: fatigue resistance with different tools and feed rates

    International Nuclear Information System (INIS)

    Baragetti, S.; D'Urso, G.

    2014-01-01

    The fatigue behavior of AA6060-T6 friction stir welded butt joints was investigated. The joints were produced by using both a standard and a threaded tri-flute cylindrical-tool with flat shoulder. The friction stir welding process was carried out using different feed rates. Preliminary tensile tests, micrograph analyses and hardness profile measurements across the welds were carried out. Welded and unwelded fatigue samples were tested under axial loading (R = 0.1) with upper limits of 10 4 and 10 5 cycles, using threaded and unthreaded (standard) tools at different feed rates. The best tensile and fatigue performance was obtained using the standard tool at low feed rate.

  1. Stress Distribution in the Dissimilar Metal Butt Weld of Nuclear Reactor Piping due to the Simulation Technique for the Repair Welding

    International Nuclear Information System (INIS)

    Lee, Hweeseung; Huh, Namsu; Kim, Jinsu; Lee, Jinho

    2013-01-01

    During welding, the dissimilar metal butt welds of nuclear piping are typically subjected to repair welding in order to eliminate defects that are found during post-weld inspection. It has been found that the repair weld can significantly increase the tensile residual stress in the weldment, and therefore, accurate estimation of the weld residual stress due to repair weld, especially for dissimilar metal welds using Ni-based alloy 82/182 in nuclear components, is of great importance in order to assess susceptibility to primary water stress corrosion cracking. In the present study, the stress distributions of dissimilar metal butt welds in nuclear reactor piping subjected to repair weld were investigated based on detailed nonlinear finite element analyses. Particular emphasis was placed on the variation of the stress distribution in the dissimilar metal butt weld according to the finite element welding analysis sequence for the repair welding process

  2. Busted Butte Phase 2: Analysis of Post-Test Mineback and Overcore Rock Samples

    International Nuclear Information System (INIS)

    Turin, H.J.; McGraw, M.A.; Jones, C.L.; Scism, C.D.; Soll, W.E.

    2002-01-01

    A complex tracer mixture was injected continuously for over two years into a 10 x 10 x 7 m block of tuff as part of the unsaturated-zone (UZ) tracer test at Busted Butte. The test was designed to address uncertainties associated with flow and transport models within the Topopah Springs and Calico Hills tuffs. The tracer mixture included nonreactive (Br, I, and FBAs) and reactive tracers (Li, Ce, Sm, Ni, Coy and Mn) and synthetic colloids. Once injection was completed, samples from the block were collected in two ways. Overcores were taken from around and below injection holes. Then, the entire block was excavated via mineback--during which progressive vertical planes of the block were exposed. Samples from the overcores and mineback were analyzed to determine the distribution of tracers on different spatial scales than available from collection borehole data. Rock analyses confirmed collection pad results that the nonreactive tracers, Br and FBAs, moved several meters. Furthermore, Br and FBAs are observed above and lateral to the injector planes suggesting that capillarity was an important process for tracer movement. Lithium, the most mobile of the metals, was transported on a scale of meters. This is consistent with laboratory sorption measurements and observed breakthrough on the collection pads. Co and Ni show transport distances of tens of cm, while Sm and Ce moved far less, possibly due to precipitation and sorption effects. Colloid transport was assessed using 1 ft3 blocks extracted from the BB Phase 2 block. In the Calico Hills material, after 15 L of water was injected over 3.5 months, less than 1% of the colloids injected were recovered. Flow patterns in the block indicate that water injected at the center imbibed outward from the injection point. In a block taken from a boundary of the Calico Hills ashfall layer, breakthrough was observed only due to fractures formed during drying of the block. The colloid transport module for FEHM was tested against

  3. Geologic map of the Strawberry Butte 7.5’ quadrangle, Meagher County, Montana

    Science.gov (United States)

    Reynolds, Mitchell W.; Brandt, Theodore R.

    2017-06-19

    The 7.5′ Strawberry Butte quadrangle in Meagher County, Montana near the southwest margin of the Little Belt Mountains, encompasses two sharply different geologic terranes.  The northern three-quarters of the quadrangle are underlain mainly by Paleoproterozoic granite gneiss, across which Middle Cambrian sedimentary rocks rest unconformably.  An ancestral valley of probable late Eocene age, eroded northwest across the granite gneiss terrane, is filled with Oligocene basalt and overlying Miocene and Oligocene sandstone, siltstone, tuffaceous siltstone, and conglomerate.  The southern quarter of the quadrangle is underlain principally by deformed Mesoproterozoic sedimentary rocks of the Newland Formation, which are intruded by Eocene biotite hornblende dacite dikes.  In this southern terrane, Tertiary strata are exposed only in a limited area near the southeast margin of the quadrangle.  The distinct terranes are juxtaposed along the Volcano Valley fault zone—a zone of recurrent crustal movement beginning possibly in Mesoproterozoic time and certainly established from Neoproterozoic–Early Cambrian to late Tertiary time.  Movement along the fault zone has included normal faulting, the southern terrane faulted down relative to the northern terrane, some reverse faulting as the southern terrane later moved up against the northern terrane, and lateral movement during which the southern terrane likely moved west relative to the northern terrane.  Near the eastern margin of the quadrangle, the Newland Formation is locally the host of stratabound sulfide mineralization adjacent to the fault zone; west along the fault zone across the remainder of the quadrangle are significant areas and bands of hematite and iron-silicate mineral concentrations related to apparent alteration of iron sulfides.  The map defines the distribution of a variety of surficial deposits, including the distribution of hematite-rich colluvium and iron-silicate boulders.  The southeast

  4. Busted Butte report on laboratory radionuclide migration experiments in non-welded tuff under unsaturated conditions

    Energy Technology Data Exchange (ETDEWEB)

    Vandergraaf, T.T.; Drew, D.J.; Ticknor, K.V

    2002-11-01

    Three blocks of non-welded tuff, one nominally one cubic foot (trial block) and the other two, nominally one cubic metre (1 m{sup 3}), were excavated from the Busted Butte Test Facility on the Nevada Test Site and transported to the Atomic Energy of Canada Limited Whiteshell Laboratories in Pinawa, Manitoba. The trial block and one of the 1-m{sup 3} blocks were used for unsaturated flow experiments. The remaining 1-m{sup 3} block is being used for saturated flow experiments and will be reported on separately. After a vertical flow of synthetic transport solution was set up under unsaturated conditions, a suite of conservative and chemically reactive radionuclide tracers was injected at volumetric flow rates of 20 mL/hr in the trial block, and 10 mL/hr in the 1-m{sup 3} block. The duration of the migration experiment in the trial block was 87 days, while the migration experiment in the 1-m{sup 3} block was continuing after 600 days. Results obtained from the migration experiment in the trial block showed that transport of {sup 95m+99}Tc, injected as the pertechnetate (an)ion, was slightly faster than that of the transport solution, using tritiated water ({sup 3}H{sub 2}O) as a flow indicator. Retardation of {sup 237}Np was consistent with that predicted from results obtained in supporting static batch sorption studies. Post-migration analysis of the flow field in the trial block showed that the front of the {sup 22}Na had migrated about half the distance through the block, and that {sup 60}Co and {sup 137}Cs had been retained near the inlet. This observation agrees qualitatively with that predicted from the results from static batch sorption studies. In the larger scale experiment, the transport behavior of Tc is very similar to that of the transport solution at this point in time. None of the other radionuclide tracers have been detected in water collected from this block. This observation is consistent with the observations for the smaller block. (author)

  5. Microstructure feature of friction stir butt-welded ferritic ductile iron

    International Nuclear Information System (INIS)

    Chang, Hung-Tu; Wang, Chaur-Jeng; Cheng, Chin-Pao

    2014-01-01

    Highlights: • Defect-free ferritic ductile iron joints is fabricated by FSW. • The welding nugget is composed of graphite, martensite, and recrystallized ferrite. • The graphite displays a striped pattern in the surface and advancing side. • The ferritic matrix transforms into martensite structure during welding. • High degree of plastic deformation is found on the advancing side. - Abstract: This study conducted friction stir welding (FSW) by using the butt welding process to join ferritic ductile iron plates and investigated the variations of microsturcture in the joined region formed after welding. No defects appeared in the resulting experimental weld, which was formed using a 3-mm thick ductile iron plate and tungsten carbide alloy stir rod to conduct FSW at a rotational speed of 982 rpm and traveling speed of 72 mm/min. The welding region was composed of deformed graphite, martensite phase, and dynamically recrystallized ferrite structures. In the surface region and on the advancing side (AS), the graphite displayed a striped configuration and the ferritic matrix transformed into martensite. On the retreating side (RS), the graphite surrounded by martensite remained as individual granules and the matrix primarily comprised dynamically recrystallized ferrite. After welding, diffusion increased the carbon content of the austenite around the deformed graphite nodules, which transformed into martensite during the subsequent cooling process. A micro Vickers hardness test showed that the maximum hardness value of the martensite structures in the weld was approximately 800 HV. An analysis using an electron probe X-ray microanalyzer (EPMA) indicated that its carbon content was approximately 0.7–1.4%. The peak temperature on the RS, 8 mm from the center of the weld, measured 630 °C by the thermocouple. Overall, increased severity of plastic deformation and process temperature near the upper stir zone (SZ) resulted in distinct phase transformation

  6. Uranium hydrogeochemical and stream sediment reconnaissance data release for the Butte NTMS Quadrangle, Montana, including concentrations of forty-two additional elements

    International Nuclear Information System (INIS)

    Broxton, D.E.; George, W.E.; Montoya, J.V.; Martell, C.J.; Hensley, W.K.; Hanks, D.

    1980-05-01

    This report contains data collected during a geochemical survey for uranium in the Butte National Topographic Map Series (NTMS) quadrangle of west-central Montana. Histograms and statistical data for uranium concentrations in water and sediment samples and thorium concentrations in sediment samples are given. Elemental concentration, field measurement, weather, geologic, and geographic data for each sample location are listed for waters and for sediments. Uranium/thorium ratios for sediment samples are also included. This report contains uranium analyses for water samples and multielement analyses for sediment samples. A supplemental report containing the results of multielement analyses of water samples will be open filed in the near future. Sediments were analyzed for uranium and thorium as well as aluminum, antimony, barium, beryllium, bismuth, cadmium, calcium, cerium, cesium, chlorine, chromium, cobalt, copper, dysprosium, europium, gold, hafnium, iron, lanthanum, lead, lithium, lutetium, magnesium, manganese, nickel, niobium, potassium, rubidium, samarium, scandium, silver, sodium, strontium, tantalum, terbium, tin, titanium, tungsten, vanadium, ytterbium, and zinc. All elemental analyses were performed at the LASL. Water samples were initially analyzed for uranium by fluorometry. All water samples containing more than 40 ppB uranium were reanalyzed by delayed-neutron counting (DNC). All sediments were analyzed for uranium by DNC. Other elemental concentrations in sediments were determined by neutron activation analysis for 31 elements, by x-ray fluorescence for 9 elements, and by arc-source emission spectrography for 2 elements. Analytical results for sediments are reported as parts per million. Descriptions of procedures used for analysis of water and sediment samples as well as analytical precisions and detection limits are given

  7. PENGARUH BESAR ARUS LISTRIK DENGAN MENGGUNAKAN ELEKTRODA SMAW TERHADAP KEKUATAN SAMBUNGAN LAS BUTT JOINT PADA PLAT MILD STEEL

    Directory of Open Access Journals (Sweden)

    Sarjito Jokosisworo

    2012-03-01

    Full Text Available The influence of mechanic disposition, is one of the factor influence ship strength. This influence can be test by mechanical test in welding butt joint. The result test database analysis can be conclude that very helpful to increase safety and quality butt joint. With steel specification C= 0,15%, Si= 0,24%, Mn= 0,88%,P= 0,018%, S= 0,034%. This material give a 90, 110, 125 ampere with SMAW AC electrode diameter 3,2 mm x 350 mm with V root and 600 angle In the fabrication of mild steel products, components or equipment, manufacturers employ welding as the principal joining method. Mild steel are weldable materials, and a welded joint can provide optimum corrosion resistance, strength, and fabrication economy. However, designers should recognize that any metal, including stainless steels, may undergo certain changes during welding. It is necessary, therefore, to exercise a reasonable degree of care during welding to minimize or prevent any deleterious effects that may occur, and to preserve the same degree of corrosion resistance and strength in weld zone that is an intheren part of the base metal

  8. Special metallurgy - the electrical butt-welding by flashing of sintered magnesium-magnesium oxide composites (1963)

    International Nuclear Information System (INIS)

    Charleux, J.

    1963-01-01

    Electrical resistance welding has become quite important since World War II because of the need of a high yield in aeronautical production. Progress has been due in particular to the improvements made in electronically controlled apparatus making possible the automatic control of welding. For the butt-welding of sections requiring either a high production rate or a high quality weld, the flash butt-welding system has been very much developed these last few years. The use of this welding method is of great importance in the field of the bonding of oxidisable metals such as magnesium or aluminium and its alloys, because the welded joint is free from oxides. This study consists of general considerations on the flash-welding process with regard to temperature distribution in the parts during welding, and to electrical phenomena connected with flashing. Besides this general or theoretical section, we have applied the welding process to the bonding of sintered magnesium, a magnesium-magnesium oxide composite, whose use as a structural element in nuclear reactors is considered. (author) [fr

  9. Glued structural members

    Science.gov (United States)

    Russell C. Moody; Jen Y. Liu

    1999-01-01

    Glued structural members are manufactured in a variety of configurations. Structural composite lumber (SCL) products consist of small pieces of wood glued together into sizes common for solid-sawn lumber. Glued-laminated timber (glulam) is an engineered stress-rated product that consists of two or more layers of lumber in which the grain of all layers is oriented...

  10. CERN welcomes new members

    Science.gov (United States)

    2017-08-01

    Lithuania is on course to become an associate member of CERN, pending final approval by the Lithuanian parliament. Associate membership will allow representatives of the Baltic nation to take part in meetings of the CERN Council, which oversees the Geneva-based physics lab.

  11. DUBNA: Member States

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    The political upheaval in what was the Soviet Union was reflected in an Extraordinary Plenipotentiaries Committee of Joint Institute for Nuclear Research (JINR) Member States, held in Dubna, near Moscow, on 10-13 December, with representatives of eleven sovereign republics of the former Soviet State taking part

  12. ADA members weigh in on critical issues.

    Science.gov (United States)

    Burgess, Karen; Ruesch, Jon D; Mikkelsen, Matthew C; Wagner, Karen Schaid

    2003-01-01

    Science, new technology, patient care, dental reimbursement and government regulations all affect today's dental practitioners. To find out more about how such challenges may affect current private practitioners, the American Dental Association conducted the 2000 Membership Needs and Opinions Survey. A questionnaire was sent to 6,310 ADA members in January 2000 with follow-up mailings in February, March and April 2000. Data collection was completed in July 2000. The survey included questions on critical professional issues, and on perceptions of the ADA and ADA priorities. A total of 3,558 completed surveys were received for an adjusted response rate of 59.5 percent. Members rated the identified issues' level of importance to them. The top three issues included "maintaining my ability to recommend the treatment option I feel is most appropriate for my patients," "receiving fair reimbursement for the dental services I provide," and "protecting myself, my staff and my patients from communicable diseases." New dentists found other items to be more significant to them compared with members overall. Although ADA members as a whole had similar views on critical issues facing dentistry and ADA priorities, there were significant differences regarding some issues. New dentists were far more concerned about securing funds for their practice and paying off debt than were all ADA members. Minority dentists expressed greater levels of concern about certain issues than did all ADA members. When planning and implementing ADA activities, the Association should continue to take into account members' relative rankings of professional issues and note issues of special interest to selected membership subgroups.

  13. Metal loading in Soda Butte Creek upstream of Yellowstone National Park, Montana and Wyoming; a retrospective analysis of previous research; and quantification of metal loading, August 1999

    Science.gov (United States)

    Boughton, G.K.

    2001-01-01

    Acid drainage from historic mining activities has affected the water quality and aquatic biota of Soda Butte Creek upstream of Yellowstone National Park. Numerous investigations focusing on metals contamination have been conducted in the Soda Butte Creek basin, but interpretations of how metals contamination is currently impacting Soda Butte Creek differ greatly. A retrospective analysis of previous research on metal loading in Soda Butte Creek was completed to provide summaries of studies pertinent to metal loading in Soda Butte Creek and to identify data gaps warranting further investigation. Identification and quantification of the sources of metal loading to Soda Butte Creek was recognized as a significant data gap. The McLaren Mine tailings impoundment and mill site has long been identified as a source of metals but its contribution relative to the total metal load entering Yellowstone National Park was unknown. A tracer-injection and synoptic-sampling study was designed to determine metal loads upstream of Yellowstone National Park.A tracer-injection and synoptic-sampling study was conducted on an 8,511-meter reach of Soda Butte Creek from upstream of the McLaren Mine tailings impoundment and mill site downstream to the Yellowstone National Park boundary in August 1999. Synoptic-sampling sites were selected to divide the creek into discrete segments. A lithium bromide tracer was injected continuously into Soda Butte Creek for 24.5 hours. Downstream dilution of the tracer and current-meter measurements were used to calculate the stream discharge. Stream discharge values, combined with constituent concentrations obtained by synoptic sampling, were used to quantify constituent loading in each segment of Soda Butte Creek.Loads were calculated for dissolved calcium, silica, and sulfate, as well as for dissolved and total-recoverable iron, aluminum, and manganese. Loads were not calculated for cadmium, copper, lead, and zinc because these elements were infrequently

  14. Supporting Members and Friends

    Science.gov (United States)

    2005-10-01

    Thank you! Over the past year, AGU has received 12,104 gifts, both large and small, from members and friends. The Union has also received corporate contributions, National Science Foundation grants, and support from the National Oceanographic Partnership Program and National Association of Geoscience Teachers. Together their generosity has benefited AGU non revenue producing programs that are critical to our science and the future health of the Union. The following list gratefully acknowledges annual gifts of $100 or more and cumulative giving of $5,000 or more. The 1919 Society ($100,000 or more) and Benefactors ($5,000-$99,999) recognize single major gifts and cumulative contributions. Three circles acknowledge annual giving: President's Circle ($1,000 or more), Leadership Circle ($200-$999), and Supporters Circle ($100-$199). Supporting Life Members, who contribute a one-time gift of $1,200 in addition to lifetime dues, are among our most loyal Supporters.

  15. Offers for our members

    CERN Multimedia

    Staff Association

    2018-01-01

    Summer is coming, enjoy our offers for the aquatic parcs! Walibi : Tickets "Zone terrestre": 25 € instead of 31 €. Access to Aqualibi: 5 € instead of 8 € on presentation of your Staff Association member ticket. Free for children under 100 cm. Car park free. * * * * * Aquaparc : Day ticket: – Children: 33 CHF instead of 39 CHF – Adults : 33 CHF instead of 49 CHF Bonus! Free for children under 5.  

  16. Offers for our members

    CERN Multimedia

    Staff Association

    2017-01-01

    Summer is here, enjoy our offers for the aquatic parcs! Walibi : Tickets "Zone terrestre": 24 € instead of 30 €. Access to Aqualibi: 5 € instead of 6 € on presentation of your SA member ticket. Free for children under 100 cm. Car park free. * * * * * Aquaparc : Day ticket: – Children: 33 CHF instead of 39 CHF – Adults : 33 CHF instead of 49 CHF Bonus! Free for children under 5.

  17. Offers for our members

    CERN Multimedia

    Staff Association

    2017-01-01

    Summer is coming, enjoy our offers for the aquatic parcs! Walibi : Tickets "Zone terrestre": 24 € instead of 30 €. Access to Aqualibi: 5 € instead of 6 € on presentation of your SA member ticket. Free for children under 100 cm. Car park free. * * * * * Aquaparc : Day ticket: – Children: 33 CHF instead of 39 CHF – Adults : 33 CHF instead of 49 CHF Bonus! Free for children under 5.

  18. [Comment on] BOSP members

    Science.gov (United States)

    Richman, Barbara T.

    The new Board on Ocean Science and Policy (BOSP) (Eos, June 7, 1983, p. 402) met for the first time on May 4. John B. Slaughter, former director of the National Science Foundation and now chancellor of the University of Maryland in College Park, is the board's chairman. Other board members are D. James Baker, Jr. (University of Washington, Seattle); Kirk Bryan (Geophysical Fluid Dynamics Laboratory, Princeton University); John P. Craven (University of Hawaii); Charles L. Drake (Dartmouth College); Paul M. Fye (Woods Hole Oceanographic Institution); Edward D. Goldberg (Scripps Institution of Oceanography); G. Ross Heath (Oregon State University); Judith T. Kildow (Massachusetts Institute of Technology); John A. Knauss (University of Rhode Island); James J. McCarthy (Museum of Comparative Zoology, Harvard University); H. William Menard (Scripps Institution of Oceanography); C. Barry Raleigh (Lamont-Doherty Geological Observatory); Roger Revelle (University of California, San Diego); David A. Ross (Woods Hole Oceanographic Institution); Brian J. Rothschild (University of Maryland); William M. Sackett (University of South Florida); John H. Steele (Woods Hole Oceanographic Institution); and Carl Wunsch (MIT). Wallace Broecker (Lamont-Doherty Geological Observatory), an original board member, resigned after the first meeting. Broecker told Eos that combining the science and policy boards resulted in a new board whose mission is too broad. A new board member will be appointed in Broecker's place

  19. High-quality MOVPE butt-joint integration of InP/AlGaInAs/InGaAsP-based all-active optical components

    DEFF Research Database (Denmark)

    Kulkova, Irina; Kadkhodazadeh, Shima; Kuznetsova, Nadezda

    2014-01-01

    In this paper, we demonstrate the applicability of MOVPE butt-joint regrowth for integration of all-active InP/AlGaAs/InGaAsP optical components and the realization of high-functionality compact photonic devices. Planar high-quality integration of semiconductor optical amplifiers of various epi...

  20. Wintercuring of Prunus dulcis cv ‘Butte,’ P. webbii and their interspecific hybrid in response to Xylella fastidiosa infections

    Science.gov (United States)

    Clonal replicates of Prunus dulcis cv ‘Butte,’ P. webbii and their interspecific hybrid P 63-61 were inoculated with Xylella fastidiosa strain M23 and evaluated for Almond Leaf Scorch Disease and subsequent wintercuring of infections during three growing seasons. Initial inoculations established gr...

  1. Recreational Use and Value of Water at Elephant Butte and Navajo Reservoirs. New Mexico State University Agricultural Experiment Station Bulletin 535.

    Science.gov (United States)

    Coppedge, Robert O.; Gray, James R.

    This document is a descriptive study of the recreational use and the value of water at Elephant Butte and Navajo Reservoirs. Previous research studies, as well as the study areas and recreational characteristics and procedures of investigation used in this study (sampling and data collection, data organization, analysis) are described. Discussions…

  2. Composite Sunrise Butte pluton: Insights into Jurassic–Cretaceous collisional tectonics and magmatism in the Blue Mountains Province, northeastern Oregon

    Science.gov (United States)

    Johnson, Kenneth H.; Schwartz, J.J.; Žák, Jiří; Verner, Krystof; Barnes, Calvin G.; Walton, Clay; Wooden, Joseph L.; Wright, James E.; Kistler, Ronald W.

    2015-01-01

    The composite Sunrise Butte pluton, in the central part of the Blue Mountains Province, northeastern Oregon, preserves a record of subduction-related magmatism, arc-arc collision, crustal thickening, and deep-crustal anatexis. The earliest phase of the pluton (Desolation Creek unit) was generated in a subduction zone environment, as the oceanic lithosphere between the Wallowa and Olds Ferry island arcs was consumed. Zircons from this unit yielded a 206Pb/238U age of 160.2 ± 2.1 Ma. A magmatic lull ensued during arc-arc collision, after which partial melting at the base of the thickened Wallowa arc crust produced siliceous magma that was emplaced into metasedimentary rocks and serpentinite of the overthrust forearc complex. This magma crystallized to form the bulk of the Sunrise Butte composite pluton (the Sunrise Butte unit; 145.8 ± 2.2 Ma). The heat necessary for crustal anatexis was supplied by coeval mantle-derived magma (the Onion Gulch unit; 147.9 ± 1.8 Ma).The lull in magmatic activity between 160 and 148 Ma encompasses the timing of arc-arc collision (159–154 Ma), and it is similar to those lulls observed in adjacent areas of the Blue Mountains Province related to the same shortening event. Previous researchers have proposed a tectonic link between the Blue Mountains Province and the Klamath Mountains and northern Sierra Nevada Provinces farther to the south; however, timing of Late Jurassic deformation in the Blue Mountains Province predates the timing of the so-called Nevadan orogeny in the Klamath Mountains. In both the Blue Mountains Province and Klamath Mountains, the onset of deep-crustal partial melting initiated at ca. 148 Ma, suggesting a possible geodynamic link. One possibility is that the Late Jurassic shortening event recorded in the Blue Mountains Province may be a northerly extension of the Nevadan orogeny. Differences in the timing of these events in the Blue Mountains Province and the Klamath–Sierra Nevada Provinces suggest that

  3. The Members of the Agency

    International Nuclear Information System (INIS)

    2007-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.63) is Palau which deposited its Instrument of Acceptance of the Statute on 2 March 2007. The Attachment hereto shows the dates on which the present 144 Member States became Members

  4. The Members of the Agency

    International Nuclear Information System (INIS)

    2009-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.67) is Cambodia which deposited its Instrument of Acceptance of the Statute on 23 November 2009. The Attachment hereto shows the dates on which the present 151 Member States became Members

  5. The Members of the Agency

    International Nuclear Information System (INIS)

    2008-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.64) is Nepal which deposited its Instrument of Acceptance of the Statute on 8 July 2008. The Attachment hereto shows the dates on which the present 145 Member States became Members

  6. The Members of the Agency

    International Nuclear Information System (INIS)

    2006-01-01

    The new Members since the last list of Member States was issued (INFCIRC/2/Rev.61) are Belize, Mozambique and Malawi, which deposited their Instruments of Acceptance of the Statute on 31 March 2006, 18 September 2006 and 2 October 2006 respectively. The Attachment hereto shows the dates on which the present 142 Member States became Members

  7. The Members of the Agency

    International Nuclear Information System (INIS)

    2009-01-01

    The new Members since the last list of Member States was issued (INFCIRC/2/Rev.66) are Bahrain, Burundi, Congo and Lesotho which deposited their Instruments of Acceptance of the Statute on 23 June 2009, 24 June 2009, 15 July 2009 and 13 July 2009, respectively. The Attachment hereto shows the dates on which the present 150 Member States became Members

  8. The Members of the Agency

    International Nuclear Information System (INIS)

    2006-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.62) is Montenegro which deposited its Instrument of Acceptance of the Statute on 30 October 2006. The Attachment hereto shows the dates on which the present 143 Member States became Members

  9. The Members of the Agency

    International Nuclear Information System (INIS)

    2009-01-01

    The new Members since the last list of Member States was issued (INFCIRC/2/Rev.66) are Bahrain, Burundi, Congo and Lesotho which deposited their Instruments of Acceptance of the Statute on 23 June 2009, 24 June 2009, 15 July 2009 and 13 July 2009, respectively. The Attachment hereto shows the dates on which the present 150 Member States became Members [ru

  10. The Members of the Agency

    International Nuclear Information System (INIS)

    2009-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.67) is Cambodia which deposited its Instrument of Acceptance of the Statute on 23 November 2009. The Attachment hereto shows the dates on which the present 151 Member States became Members [fr

  11. The Members of the Agency

    International Nuclear Information System (INIS)

    2006-01-01

    The new Members since the last list of Member States was issued (INFCIRC/2/Rev.61) are Belize, Mozambique and Malawi, which deposited their Instruments of Acceptance of the Statute on 31 March 2006, 18 September 2006 and 2 October 2006 respectively. The Attachment hereto shows the dates on which the present 142 Member States became Members [fr

  12. The Members of the Agency

    International Nuclear Information System (INIS)

    2009-01-01

    The new Members since the last list of Member States was issued (INFCIRC/2/Rev.66) are Bahrain, Burundi, Congo and Lesotho which deposited their Instruments of Acceptance of the Statute on 23 June 2009, 24 June 2009, 15 July 2009 and 13 July 2009, respectively. The Attachment hereto shows the dates on which the present 150 Member States became Members [fr

  13. The Members of the Agency

    International Nuclear Information System (INIS)

    2009-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.65) is the Sultanate of Oman which deposited its Instrument of Acceptance of the Statute on 5 February 2009. The Attachment hereto shows the dates on which the present 146 Member States became Members [fr

  14. The Members of the Agency

    International Nuclear Information System (INIS)

    2005-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.59) is the Islamic Republic of Mauritania, which deposited the instrument of acceptance of the Statute on 23 November 2004. The Attachment hereto shows the dates on which the present 138 Member States became Members

  15. The Members of the Agency

    International Nuclear Information System (INIS)

    2009-01-01

    The new Members since the last list of Member States was issued (INFCIRC/2/Rev.66) are Bahrain, Burundi, Congo and Lesotho which deposited their Instruments of Acceptance of the Statute on 23 June 2009, 24 June 2009, 15 July 2009 and 13 July 2009, respectively. The Attachment hereto shows the dates on which the present 150 Member States became Members [es

  16. The Members of the Agency

    International Nuclear Information System (INIS)

    2009-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.67) is Cambodia which deposited its Instrument of Acceptance of the Statute on 23 November 2009. The Attachment hereto shows the dates on which the present 151 Member States became Members [es

  17. The Members of the Agency

    International Nuclear Information System (INIS)

    2006-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.60) is Chad, which deposited the instrument of acceptance of the Statute on 2 November 2005. The Attachment hereto shows the dates on which the present 139 Member States became Members

  18. The Members of the Agency

    International Nuclear Information System (INIS)

    2009-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.65) is the Sultanate of Oman which deposited its Instrument of Acceptance of the Statute on 5 February 2009. The Attachment hereto shows the dates on which the present 146 Member States became Members [es

  19. The Members of the Agency

    International Nuclear Information System (INIS)

    2003-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.58) is Kyrgyzstan, which deposited the instrument of acceptance of the Statute on 10 September 2003. The list shows the dates on which the present 137 Member States became Members

  20. The Members of the Agency

    International Nuclear Information System (INIS)

    2009-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.65) is the Sultanate of Oman which deposited its Instrument of Acceptance of the Statute on 5 February 2009. The Attachment hereto shows the dates on which the present 146 Member States became Members

  1. The Members of the Agency

    International Nuclear Information System (INIS)

    2009-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.67) is Cambodia which deposited its Instrument of Acceptance of the Statute on 23 November 2009. The Attachment hereto shows the dates on which the present 151 Member States became Members [ru

  2. Offers for our members

    CERN Multimedia

    Staff Association

    2013-01-01

    Summer is here, enjoy our offers for the aquatic parcs! Walibi : Tickets "Zone terrestre": 21 € instead of 26 €. Access to Aqualibi: 5 € instead of 8 € on presentation of your SA member ticket. Free for children (3-11 years old) before 12 h 00. Free for children under 3, with limited access to the attractions. Car park free. * * * * * Aquaparc : Day ticket: – Children: 30 CHF instead of 39 CHF – Adults : 36 CHF instead of 49 CHF Bonus! Free for children under 5.

  3. Offers for our members

    CERN Multimedia

    Staff Association

    2015-01-01

    Summer is here, enjoy our offers for the aquatic parcs! Walibi : Tickets "Zone terrestre": 21,50 € instead of 27 €. Access to Aqualibi: 5 € instead of 6 € on presentation of your SA member ticket. Free for children (3-11 years old) before 12:00 p.m. Free for children under 3, with limited access to the attractions. Car park free. * * * * * Aquaparc : Day ticket: – Children: 33 CHF instead of 39 CHF – Adults : 33 CHF instead of 49 CHF Bonus! Free for children under 5.

  4. Offers for our members

    CERN Multimedia

    Staff Association

    2016-01-01

    Summer is here, enjoy our offers for the aquatic parcs! Walibi : Tickets "Zone terrestre": 23 € instead of 29 €. Access to Aqualibi: 5 € instead of 6 € on presentation of your SA member ticket. Free for children (3-11 years old) before 12:00 p.m. Free for children under 3, with limited access to the attractions. Car park free. * * * * * Aquaparc : Day ticket: – Children: 33 CHF instead of 39 CHF – Adults : 33 CHF instead of 49 CHF Bonus! Free for children under 5.

  5. Cryogenic support member

    International Nuclear Information System (INIS)

    Niemann, R.C.; Gonczy, J.D.; Nicol, T.H.

    1987-01-01

    A cryogenic support member is described for restraining a cryogenic system comprising; a rod having a depression at a first end. The rod is made of non-metallic material. The non-metallic material has an effectively low thermal conductivity; a metallic plug; and a metallic sleeve. The plug and the sleeve are shrink-fitted to the depression in the rod and assembled thereto such that the plug is disposed inside the depression of the rod. The sleeve is disposed over the depression in the rod and the rod is clamped therebetween. The shrink-fit clamping the rod is generated between the metallic plug and the metallic sleeve

  6. The speciation of iodine in the salt impacted Black Butte soil series along the Virgin river, Nevada, USA

    International Nuclear Information System (INIS)

    Steinberg, Spencer M.; Buck, Brenda; Morton, Janice; Dorman, James

    2008-01-01

    Salt-impacted soils occur in floodplains, wetlands and backswamps in arid climates. These soils become sinks or temporary storage sites for soluble salts and contaminants including agricultural chemicals, industrial pollutants and radionuclides such as 129 I. The vertical distribution of I in the Black Butte soil series along the Virgin river was assessed and the distribution of I between I - , IO 3 - and organically bound I was determined. The speciation of I was compared to the organic C content, specific components of the organic C, and clay content. This study indicates that organic I was the most abundant form of I in these soil samples and that the content of organic I generally correlated to total organic matter and lignin (as measured by chemolysis) of the samples

  7. The speciation of iodine in the salt impacted Black Butte soil series along the Virgin river, Nevada, USA

    Energy Technology Data Exchange (ETDEWEB)

    Steinberg, Spencer M. [Department of Chemistry, University of Nevada Las Vegas, Las Vegas, NV 80154 (United States)], E-mail: spencer.steinberg@unlv.edu; Buck, Brenda; Morton, Janice [Department of Geoscience, University of Nevada Las Vegas, Las Vegas, NV 80154 (United States); Dorman, James [Department of Chemistry, University of Nevada Las Vegas, Las Vegas, NV 80154 (United States)

    2008-12-15

    Salt-impacted soils occur in floodplains, wetlands and backswamps in arid climates. These soils become sinks or temporary storage sites for soluble salts and contaminants including agricultural chemicals, industrial pollutants and radionuclides such as {sup 129}I. The vertical distribution of I in the Black Butte soil series along the Virgin river was assessed and the distribution of I between I{sup -}, IO{sub 3}{sup -} and organically bound I was determined. The speciation of I was compared to the organic C content, specific components of the organic C, and clay content. This study indicates that organic I was the most abundant form of I in these soil samples and that the content of organic I generally correlated to total organic matter and lignin (as measured by chemolysis) of the samples.

  8. Influence of the phase morphology on the weldability of PLA/PBAT-blends by using butt-welding

    Science.gov (United States)

    Goebel, L.; Bonten, C.

    2014-05-01

    The material development in the field of bioplastics is steadily increasing. It is important to examine the processability but the Investigation of further process steps is also very important. In this paper the weldability of bioplastics is discussed. Compounds of Polylactide (PLA) and Polybutyleneadipate-terephthalate (PBAT) are produced by a twin screw extruder with different mixing ratios. Tensile specimens are produced by injection moulding and the tensile tests are carried out. In order to verify the weldability, some tensile specimens are cut in halfes and butt welded. Afterwards a tensile test is performed with the welded samples and the results are compared with the values of the unwelded samples. For understanding the results, the morphology of the welds were examined and correlated. It has been found that blends with a mixing ratio of 50:50 have the lowest welding factor, because of the immiscibility of PLA and PBAT. Weld images show segregated areas that reduce the force transmission.

  9. Numerical Simulation of Heat and Flow Behaviors in Butt-fusion Welding Process of HDPE Pipes with Curved Fusion Surface

    Energy Technology Data Exchange (ETDEWEB)

    Yoo, Jae Hyun; Ahn, Kyung Hyun [Seoul National University, Seoul (Korea, Republic of); Choi, Sunwoong; Oh, Ju Seok [Hannam University, Daejeon (Korea, Republic of)

    2017-08-15

    Butt-fusion welding process is used to join the polymeric pipes. Recently, some researchers suggest the curved surface to enhance a welding quality. We investigated how curved welding surface affects heat and flow behaviors of polymer melt during the process in 2D axisymmetric domain with finite element method, and discussed the effect to the welding quality. In this study, we considered HDPE pipes. In heat soak stage, curved phase interface between the melt and solid is shown along the shape of welding surface. In jointing stage, squeezing flow is generated between curved welding surface and phase interface. The low shear rate in fusion domain reduces the alignment of polymer to the perpendicular direction of pipes, and then this phenomenon is expected to help to enhance the welding quality.

  10. The coal deposits of the Alkali Butte, the Big Sand Draw, and the Beaver Creek fields, Fremont County, Wyoming

    Science.gov (United States)

    Thompson, Raymond M.; White, Vincent L.

    1952-01-01

    Large coal reserves are present in three areas located between 12 and 20 miles southeast of Riverton, Fremont County, central Wyoming. Coal in two of these areas, the Alkali Butte coal field and the Big Sand Draw coal field, is exposed on the surface and has been developed to some extent by underground mining. The Beaver Creek coal field is known only from drill cuttings and cores from wells drilled for oil and gas in the Beaver Creek oil and gas field.These three coal areas can be reached most readily from Riverton, Wyo. State Route 320 crosses Wind River about 1 mile south of Riverton. A few hundred yards south of the river a graveled road branches off the highway and extends south across the Popo Agie River toward Sand Draw oil and gas field. About 8 miles south of the highway along the Sand Draw road, a dirt road bears east and along this road it is about 12 miles to the Bell coal mine in the Alkali Butte coal field. Three miles southeast of the Alkali Butte turn-off, 3 miles of oiled road extends southwest into the Beaver Creek oil and gas field. About 6 miles southeast of the Beaver Creek turn-off, in the valley of Little Sand Draw Creek, a dirt road extends east 1. mile and then southeast 1 mile to the Downey mine in the Big Sand Draw coal field. Location of these coal fields is shown on figure 1 with their relationship to the Wind River basin and other coal fields, place localities, and wells mentioned in this report. The coal in the Alkali Butte coal field is exposed partly on the Wind River Indian Reservation in Tps. 1 and 2 S., R. 6 E., and partly on public land. Coal in the Beaver Creek and Big Sand Draw coal fields is mainly on public land. The region has a semiarid climate with rainfall averaging less than 10 in. per year. When rain does fall the sandy-bottomed stream channels fill rapidly and are frequently impassable for a few hours. Beaver Creek, Big Sand Draw, Little Sand Draw, and Kirby Draw and their smaller tributaries drain the area and flow

  11. Prediction of residual stresses and distortions due to laser beam welding of butt joints in pressure vessels

    International Nuclear Information System (INIS)

    Moraitis, G.A.; Labeas, G.N.

    2009-01-01

    A two-level three-dimensional Finite Element (FE) model has been developed to predict keyhole formation and thermo-mechanical response during Laser Beam Welding (LBW) of steel and aluminium pressure vessel or pipe butt-joints. A very detailed and localized (level-1) non-linear three-dimensional transient thermal model is initially developed, which simulates the mechanisms of keyhole formation, calculates the temperature distribution in the local weld area and predicts the keyhole size and shape. Subsequently, using a laser beam heat source model based on keyhole assumptions, a global (level-2) thermo-mechanical analysis of the LBW butt-joint is performed, from which the joint residual stresses and distortions are calculated. All the major physical phenomena associated to LBW, such as laser heat input via radiation, heat losses through convection and radiation, as well as latent heat are accounted for in the numerical model. Material properties and particularly enthalpy, which is very important due to significant material phase changes, are introduced as temperature-dependent functions. The main advantages of the developed model are its efficiency, flexibility and applicability to a wide range of LBW problems (e.g. welding for pressure vessel or pipework construction, welding of automotive, marine or aircraft components, etc). The model efficiency arises from the two-scale approach applied. Minimal or no experimental data are required for the keyhole size and shape computation by the level-1 model, while the thermo-mechanical response calculation by the level-2 model requires only process and material data. Therefore, it becomes possible to efficiently apply the developed simulation model to different material types and varying welding parameters (i.e. welding speed, heat source power, joint geometry, etc.) in order to control residual stresses and distortions within the welded structure

  12. Thermal effects in concrete members

    International Nuclear Information System (INIS)

    Kar, A.K.

    1977-01-01

    When subjected to temperature changes and restrained from free movement, a member develops stresses. Restrained members are sometimes assumed to act independently of other members. A method of analysis and design for thermal stresses in such members is provided. The method of analysis, based on the ultimate strength concept, greatly reduces the computational efforts for determining thermal effects in concrete members. Available charts and tables and the recommendations given herein simplify the design. (Auth.)

  13. Nurse IOM members' contributions to the Institute of Medicine.

    Science.gov (United States)

    Grey, Margaret; Holzemer, William L; Larson, Elaine

    2012-01-01

    Nursing is the largest health care profession, and Institute of Medicine (IOM) nurse members have the potential to contribute to health policy through IOM activities. We studied reported activities of IOM nurse members. To describe activities of IOM nurse members within the IOM. An e-mail survey was conducted that asked nurse IOM members to assess self-reported IOM activities. Of 57 members, 47 had functioning e-mail addresses, and 33 usable responses were received. The survey consisted of 9 questions dealing with roles and responsibilities undertaken in the previous 5 years. Data analyses were descriptive. The data suggest that nurses have made considerable contributions to the IOM and their participation seems to be as high, or higher, than other disciplines. In an era of health care reform, there is additional opportunity for nurse IOM members to enhance their work in the IOM. Copyright © 2012 Elsevier Inc. All rights reserved.

  14. Motivation, Personal Satisfaction of Team Members and Conformity ...

    African Journals Online (AJOL)

    Motivation, Personal Satisfaction of Team Members and Conformity to Team Norms as Predictors of Team Performance. ... The sample included two thousand and eighty-eight athletes (players of six sports) surveyed through a purposive ...

  15. 439 Motivation, Personal Satisfaction of Team Members and ...

    African Journals Online (AJOL)

    User

    2011-07-21

    Jul 21, 2011 ... thousand and eighty-eight athletes (players of six sports) surveyed through a ... of team members, team success, effective communication, ... Volleyball, Basketball, Hockey and Handball fell into the sample of the study.

  16. Offers for our members

    CERN Multimedia

    Staff Association

    2013-01-01

    The Courir shops propose the following offer: 15% discount on all articles (not on sales) in the Courir shops (Val Thoiry, Annemasse and Neydens) and 5% discount on sales upon presentation of your Staff Association membership card and an identity card before payment. Summer is here, enjoy our offers for the aquatic parcs! Walibi : Tickets "Zone terrestre": 21 € instead of 26 €. Access to Aqualibi: 5 € instead of 8 € on presentation of your SA member ticket. Free for children (3-11 years old) before 12 h 00. Free for children under 3, with limited access to the attractions. Car park free. * * * * * Aquaparc : Day ticket: – Children: 30 CHF instead of 39 CHF – Adults : 36 CHF instead of 49 CHF Bonus! Free for children under 5.

  17. Offers for our members

    CERN Multimedia

    Association du personnel

    2013-01-01

    La banque LCL propose aux membres de l’Association du personnel les avantages suivants : – Un barème Privilège sur le Prêt immobilier – Des avantages tarifaires sur l’épargne, notamment l’assurance-vie. – Un taux préférentiel de prêt à la consommation. En outre, jusqu’au 30 septembre 2013, elle offre 50€ à tous les nouveaux clients, membres de l'Association du personnel. Summer is here, enjoy our offers for the aquatic parcs! Tickets "Zone terrestre" : 21 € instead of de 26 €. Access to Aqualibi : 5 euros instead of 8 euros on presentation of your SA member ticket. Free for children (3-11 years old) before 12 h 00. Free for children under 3, with limited access to the attractions. Free car park. * * * * * * * Full day ticket: – Children : 30 CHF instead of 39 CHF &...

  18. Offers for our members

    CERN Multimedia

    Staff Association

    2013-01-01

    The warm weather arrives, it's time to take advantage of our offers Walibi and Aquapark! Walibi : Tickets "Zone terrestre": 21 € instead of 26 € Access to Aqualibi: 5 € instead of 8 € on presentation of your SA member ticket. Free for children (3-11 years old) before 12 h 00. Free for children under 3, with limited access to the attractions. Car park free. * * * * * Aquaparc : Half-day ticket (5 hours): – Children: 26 CHF instead of 35 CHF – Adults : 32 CHF instead of 43 CHF Day ticket: – Children: 30 CHF instead of 39 CHF – Adults : 36 CHF instead of 49 CHF Free for children under 5.

  19. Identifying New Members of Nearby Moving Groups

    Science.gov (United States)

    Holmbeck, Erika; Vican, Laura

    2014-06-01

    Our group has assembled a sample of 14,000 stars of spectral types B9-M9 with measured UVW Galactic space velocities and lying within 125 pc of Earth. We have identified candidate members of three nearby young (less than 100 Myr) moving groups. For stars of spectral types G5 and later, we have used the Kast spectrometer on the Shane 3m telescope at Lick Observatory to measure lithium abundance in order to determine stellar ages. With the data we have obtained from this run, we will be able to establish whether our candidates are bona fide members of the moving groups in question. I will be presenting the preliminary results from this survey, including spectra of the ~50 stars observed thus far. These nearby young stars will make excellent targets for direct imaging followup surveys, since any giant planets around young stars will still be warm, and will therefore be bright enough to detect with instruments like GPI.

  20. Suicidal behavior among members of Gamblers Anonymous.

    Science.gov (United States)

    Frank, M L; Lester, D; Wexler, A

    1991-09-01

    A national sample of 500 members of Gamblers Anonymous was surveyed by mail in order to gather information on suicidal history. One hundred sixty two usable surveys were returned representing 32.4% of the original sample. Compulsive gamblers who had a history of suicidal preoccupation began gambling at an earlier age than nonsuicidal gamblers and were more likely to have stolen to support their gambling. They also tended to have addicted relatives and children more than nonsuicidal gamblers did. The data suggest that those gamblers who had been suicidal tend to be more serious gamblers than nonsuicidal respondents.

  1. Marketing Strategies for Recruiting 4-H Members in West Virginia.

    Science.gov (United States)

    Wingenbach, Gary J.; Nestor, Cheryl; Lawrence, Layle D.; Gartin, Stacy A.; Woloshuk, Jean; Mulkeen, Patricia

    2000-01-01

    According to a survey of 174 West Virginia 4-H members aged 13-18, the Internet and word of mouth were most effective in recruiting new members. Active messages stressing camps, fun, and friendship had the most influence on retention. A statewide marketing plan was recommended. (SK)

  2. Faculty Member Perceptions of Academic Leadership Styles at Private Colleges

    Science.gov (United States)

    Gidman, Lori Kathleen

    2013-01-01

    The leadership style of academic leaders was studied through the eyes of faculty members. This empirical study looked at faculty perceptions of academic leadership with the use of a numerical survey as the basis for observation. Faculty members at six private liberal arts institutions completed the Multifactor Leadership Questionnaire (MLQ) in…

  3. The Millennium Cohort Study: Answering Long-Term Health Concerns of US Military Service Members by Integrating Longitudinal Survey Data with Military Health System Records. Part 2. Pre-Deployment

    Science.gov (United States)

    2013-01-01

    8217, Psychological Medicine, vol. 38, no. 4, pp. 511-522. Jacobson IG, Ryan MAK, Hooper TI, Smith TC, Amoroso PJ, Boyko EJ, Gackstetter GD, Wells TS...Instruments Embedded within the Survey Construct Inventory Physical, mental, and functional health Short-Form 36 Psychological assessment...including symptoms of Patient Health Questionnaire depression, anxiety, panic syndrome, binge-eating, bulimia (PHQ) nervosa, and alcohol abuse Post

  4. A Survey on Characteristics of Core Latin Journals in Scientific Output of Faculty Members of Tehran University in Accordance to ISI Citations and JCR Impact Factor During 1990-2009

    Directory of Open Access Journals (Sweden)

    Fatemeh Jafari

    2010-12-01

    Full Text Available The present study intends to investigate characteristics of core Latin journals in scientific output of faculty members of Tehran University (Faculties of Humanities, Psychology and Education, Social Science and Art indexed in A&HCI, SSCI (Thomson Reuters according to ISI citations and, JCR impact factor. 5434 citations to 194 articles were used as sample. Citation analysis was employed. Core journals were established according to Bradford law. Research findings reveal that out of 5434 citations, 3230 (59/44% citations belong to periodicals. Also due to interdisciplinary differences, in 50 % majors, periodicals were cited more than other information sources. Findings also indicate that there are similarities between the core journals and JCR journals. Comparison of impact factor average of core journals with impact factor average of JCR journals shows that average impact factor of core journals exceeds impact factor average of JCR journals in related fields

  5. Prevalence, Knowledge and Attitudes Towards Smoking Among SEPAR Members.

    Science.gov (United States)

    Solano Reina, Segismundo; Jiménez Ruiz, Carlos A; de Higes Martinez, Eva; Garcia Rueda, Marcos; Callejas González, Francisco J; de Granda Orive, Jose I; Vaquero Lozano, Paz; de Lucas Ramos, Pilar; Alfageme Michavila, Inmaculada

    2016-12-01

    The aims of this study were to estimate the prevalence of smoking among SEPAR members, and their approach to smoking cessation in their patients. An online survey was completed by 640 members (496 pulmonologists, 45 nurses, 34 thoracic surgeons, 37 physiotherapists, and 28 other specialists). Of the members interviewed, 5% confessed that they were smokers: 3.5% pulmonologists; 8.9% nurses; 8.8% thoracic surgeons, and 13.5% physiotherapists. A total of 96% of members assign a lot or quite a lot of importance to setting an example; 98% of members always or often ask their patients about their smoking habit. The most effective anti-smoking intervention, according to 77% of members, is a combination of drugs and psychological support. These results are an indicator of the awareness and commitment of SEPAR members to smoking and its cessation. Copyright © 2016 SEPAR. Publicado por Elsevier España, S.L.U. All rights reserved.

  6. The librarian as a member of the education department team: using web 2.0 technologies to improve access to education materials and information.

    Science.gov (United States)

    Egan, Laurel

    2012-01-01

    The part-time solo librarian at St. James Healthcare in Butte, Montana, serves physicians, staff, patients, and other health care professionals in the area. The library is part of the Education Department within the hospital's organizational structure. Recent developments have expanded the requirements of the Education Department, creating new challenges. The librarian is a member of the team developing solutions to the many ways that continuing education needs have to be met for the staff and physicians. A free website that houses education information and material is one of the projects that has been created and is maintained by the librarian.

  7. The Members of the Agency

    International Nuclear Information System (INIS)

    2003-01-01

    The document lists the 135 Member States of the Agency as of 19 March 2003. The new Member since the last issue of the list (INFCIRC/2/56) is the Republic of Honduras. The dates on which the present 135 Member States became Members are given in an Attachment. It also shows the States whose application for membership of the Agency has been approved by the General Conference but which has not yet deposited an instrument of acceptance of the Statute

  8. The Members of the Agency

    International Nuclear Information System (INIS)

    1999-01-01

    The document lists the 130 Member States of the Agency as of 1 December 1999. The new Member since the last issue of the list (INFCIRC/2/52) is Angola. The dates on which the present 130 Member States became Members, and the state Honduras) whose application for membership of the Agency has been approved by the General Conference but which has not yet deposited an instrument of acceptance of the Statute are given in an Attachment

  9. The Members of the Agency

    International Nuclear Information System (INIS)

    2002-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.55) is the Republic of Botswana, which deposited the instrument of acceptance of the Statute on 20 March 2002. The Attachment hereto shows the dates on which the present 134 Member States became Members. It also shows the State whose application for membership of the Agency has been approved by the General Conference, but which has not yet deposited an instrument of acceptance of the Statute

  10. The Members of the Agency

    International Nuclear Information System (INIS)

    2001-01-01

    The document lists the 132 Member States of the Agency as of 1 June 2001. The new Members since the last issue of the list (INFCIRC/2/53) are Central African Republic and Azerbaijan. The dates on which the present 132 Member States became Members are given in an Attachment. It also shows the States whose application for membership of the Agency has been approved by the General Conference but which has not yet deposited an instrument of acceptance of the Statute

  11. The Members of the Agency

    International Nuclear Information System (INIS)

    2012-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.69) is the Commonwealth of Dominica, which deposited its instrument of acceptance of the Statute on 17 February 2012. The Attachment hereto shows the dates on which the present 153 Member States deposited instruments of ratification or acceptance of the Statute with the depositary Government

  12. The Members of the Agency

    International Nuclear Information System (INIS)

    2012-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.70) is Papua New Guinea, which deposited its instrument of acceptance of the Statute on 4 April 2012. The Attachment hereto shows the dates on which the present 154 Member States deposited instruments of ratification or acceptance of the Statute with the depositary Government

  13. The Members of the Agency

    International Nuclear Information System (INIS)

    2012-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.69) is the Commonwealth of Dominica, which deposited its instrument of acceptance of the Statute on 17 February 2012. The Attachment hereto shows the dates on which the present 153 Member States deposited instruments of ratification or acceptance of the Statute with the depositary Government [es

  14. The Members of the Agency

    International Nuclear Information System (INIS)

    2013-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.74) is Swaziland, which deposited its instrument of acceptance of the Statute on 15 February 2013. The Attachment hereto shows the dates on which the present 159 Member States deposited instruments of ratification or acceptance of the Statute with the depositary Government

  15. The Members of the Agency

    International Nuclear Information System (INIS)

    2012-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.71) is Rwanda, which deposited its instrument of acceptance of the Statute on 4 September 2012. The Attachment hereto shows the dates on which the present 155 Member States deposited instruments of ratification or acceptance of the Statute with the depositary Government

  16. The Members of the Agency

    International Nuclear Information System (INIS)

    2011-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.68) is the Lao People's Democratic Republic which deposited its instrument of acceptance of the Statute on 4 November 2011. The Attachment hereto shows the dates on which the present 152 Member States deposited instruments of ratification or acceptance of the Statue with the depositary Government [fr

  17. The Members of the Agency

    International Nuclear Information System (INIS)

    2012-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.73) is Trinidad and Tobago, which deposited its instrument of acceptance of the Statute on 9 November 2012. The Attachment hereto shows the dates on which the present 158 Member States deposited instruments of ratification or acceptance of the Statute with the depositary Government [fr

  18. The Members of the Agency

    International Nuclear Information System (INIS)

    2012-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.70) is Papua New Guinea, which deposited its instrument of acceptance of the Statute on 4 April 2012. The Attachment hereto shows the dates on which the present 154 Member States deposited instruments of ratification or acceptance of the Statute with the depositary Government [ru

  19. Family members' experiences of autopsy

    NARCIS (Netherlands)

    Oppewal, F; Meyboom-de Jong, B

    Background. The experiences of family members will teach us how to handle an autopsy, the ultimate quality assessment tool. Objective. The aim of this study was to determine surviving family members' experience of autopsy. Method. Seven GPs were asked to approach surviving family members of

  20. The Members of the Agency

    International Nuclear Information System (INIS)

    2014-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.76) is Brunei Darussalam, which deposited its instrument of acceptance of the Statute on 18 February 2014. The Attachment hereto shows the dates on which the present 162 Member States deposited instruments of ratification or acceptance of the Statute with the depositary Government [fr

  1. The Members of the Agency

    International Nuclear Information System (INIS)

    2012-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.70) is Papua New Guinea, which deposited its instrument of acceptance of the Statute on 4 April 2012. The Attachment hereto shows the dates on which the present 154 Member States deposited instruments of ratification or acceptance of the Statute with the depositary Government [fr

  2. The Members of the Agency

    International Nuclear Information System (INIS)

    2012-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.71) is Rwanda, which deposited its instrument of acceptance of the Statute on 4 September 2012. The Attachment hereto shows the dates on which the present 155 Member States deposited instruments of ratification or acceptance of the Statute with the depositary Government [fr

  3. The Members of the Agency

    International Nuclear Information System (INIS)

    2012-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.69) is the Commonwealth of Dominica, which deposited its instrument of acceptance of the Statute on 17 February 2012. The Attachment hereto shows the dates on which the present 153 Member States deposited instruments of ratification or acceptance of the Statute with the depositary Government [fr

  4. The members of the Agency

    International Nuclear Information System (INIS)

    1993-01-01

    The 42nd revision of INFCIRC/2 lists the 113 Member States of the International Atomic Energy Agency as of 1 January 1993. It includes Slovenia as a new Member State as of 21 September 1992, Cambodia replaces the former name ''Democratic Kampuchea'' and Czechoslovakia was deleted as it ceased to be a member of the Agency as of 1 January 1993 (INFCIRC/417)

  5. The Members of the Agency

    International Nuclear Information System (INIS)

    2011-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.68) is the Lao People's Democratic Republic which deposited its instrument of acceptance of the Statute on 4 November 2011. The Attachment hereto shows the dates on which the present 152 Member States deposited instruments of ratification or acceptance of the Statue with the depositary Government [es

  6. The Members of the Agency

    International Nuclear Information System (INIS)

    2012-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.73) is Trinidad and Tobago, which deposited its instrument of acceptance of the Statute on 9 November 2012. The Attachment hereto shows the dates on which the present 158 Member States deposited instruments of ratification or acceptance of the Statute with the depositary Government [es

  7. The Members of the Agency

    International Nuclear Information System (INIS)

    2012-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.70) is Papua New Guinea, which deposited its instrument of acceptance of the Statute on 4 April 2012. The Attachment hereto shows the dates on which the present 154 Member States deposited instruments of ratification or acceptance of the Statute with the depositary Government [es

  8. The Members of the Agency

    International Nuclear Information System (INIS)

    2012-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.71) is Rwanda, which deposited its instrument of acceptance of the Statute on 4 September 2012. The Attachment hereto shows the dates on which the present 155 Member States deposited instruments of ratification or acceptance of the Statute with the depositary Government [es

  9. The Members of the Agency

    International Nuclear Information System (INIS)

    2014-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.76) is Brunei Darussalam, which deposited its instrument of acceptance of the Statute on 18 February 2014. The Attachment hereto shows the dates on which the present 162 Member States deposited instruments of ratification or acceptance of the Statute with the depositary Government [es

  10. The Members of the Agency

    International Nuclear Information System (INIS)

    2012-01-01

    The new Members since the last list of Member States was issued (INFCIRC/2/Rev.72) are Fiji and Togo, which deposited their instruments of acceptance of the Statute on 2 November 2012 and 1 November 2012, respectively. The Attachment hereto shows the dates on which the present 157 Member States deposited instruments of ratification or acceptance of the Statute with the depositary Government

  11. The Members of the Agency

    International Nuclear Information System (INIS)

    2014-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.76) is Brunei Darussalam, which deposited its instrument of acceptance of the Statute on 18 February 2014. The Attachment hereto shows the dates on which the present 162 Member States deposited instruments of ratification or acceptance of the Statute with the depositary Government

  12. The Members of the Agency

    International Nuclear Information System (INIS)

    2012-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.73) is Trinidad and Tobago, which deposited its instrument of acceptance of the Statute on 9 November 2012. The Attachment hereto shows the dates on which the present 158 Member States deposited instruments of ratification or acceptance of the Statute with the depositary Government

  13. The Members of the Agency

    International Nuclear Information System (INIS)

    2011-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.68) is the Lao People's Democratic Republic which deposited its instrument of acceptance of the Statute on 4 November 2011. The Attachment hereto shows the dates on which the present 152 Member States deposited instruments of ratification or acceptance of the Statue with the depositary Government

  14. The Members of the Agency

    International Nuclear Information System (INIS)

    2012-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.71) is Rwanda, which deposited its instrument of acceptance of the Statute on 4 September 2012. The Attachment hereto shows the dates on which the present 155 Member States deposited instruments of ratification or acceptance of the Statute with the depositary Government [ru

  15. Technical Letter Report - Preliminary Assessment of NDE Methods on Inspection of HDPE Butt Fusion Piping Joints for Lack of Fusion

    International Nuclear Information System (INIS)

    Crawford, Susan L.; Cumblidge, Stephen E.; Doctor, Steven R.; Hall, Thomas E.; Anderson, Michael T.

    2008-01-01

    The U.S. Nuclear Regulatory Commission (NRC) has a multi-year program at the Pacific Northwest National Laboratory (PNNL) to provide engineering studies and assessments of issues related to the use of nondestructive evaluation (NDE) methods for the reliable inspection of nuclear power plant components. As part of this program, there is a subtask 2D that was set up to address an assessment of issues related to the NDE of high density polyethylene (HDPE) butt fusion joints. This work is being driven by the nuclear industry wanting to employ HDPE materials in nuclear power plant systems. This being a new material for use in nuclear applications, there are a number of issues related to its use and potential problems that may evolve. The industry is pursuing ASME Code Case N-755 entitled 'Use of Polyethylene (PE) Plastic Pipe for Section III, Division 1, Construction and Section XI Repair/Replacement Activities' that contains the requirements for nuclear power plant applications of HDPE. This Code Case requires that inspections be performed after the fusion joint is made by visually examining the bead that is formed and conducting a pressure test of the joint. These tests are only effective in general if gross through-wall flaws exist in the fusion joint. The NRC wants to know whether a volumetric inspection can be conducted on the fusion joint that will reliably detect lack-of-fusion conditions that may be produced during joint fusing. The NRC has requested that the work that PNNL is conducting be provided to assist them in resolving this inspection issue of whether effective volumetric NDE can be conducted to detect lack of fusion (LOF) in the butt HDPE joints. PNNL had 24 HDPE pipe specimens manufactured of 3408 material to contain LOF conditions that could be used to assess the effectiveness of NDE in detecting the LOF. Basic ultrasonic material properties were measured and used to guide the use of phased arrays and time-of-flight diffraction (TOFD) work that was

  16. Thermo-mechanical FE-analysis of butt-welding of a Cu-Fe canister for spent nuclear fuel

    International Nuclear Information System (INIS)

    Josefson, B.L.; Karlsson, L.; Lindgren, L.E.; Jonsson, M.

    1992-10-01

    In the Swedish nuclear waste program it has been proposed that spent nuclear fuel shall be placed in composite copper-steel canisters. These canisters will be placed in holes in tunnels located some 500 m underground in a rock storage. The canisters consists of two cylinders of 4850 mm length, one inner cylinder made of steel and one outer cylinder made of copper. The outer diameter of the canister is 880 mm and the wall thickness for each cylinder is 50 mm. At the storage, the steel cylinder, which contains the spent nuclear fuel, is placed inside the copper cylinder. Thereafter, a copper end is butt welded to the copper cylinder using electron beam welding. To obtain penetration through the thickness with this weld method a backing ring is placed at the inside of the copper cylinder. In the present paper, the temperature, strain and stress fields present during welding and after cooling after welding are calculated numerically using the FE-code NIKE-2D. The aim is to use the results of the present calculations to estimate the risk for creep fracture during the subsequent design life. A large strain formulation is employed for the calculation of transient and residual stresses in the canister based on the calculated history of the temperature field present in the canister during the welding process. The contact algorithm available in NIKE-2D is used to detect possible contact between the steel and copper cylinders during the welding. To simplify the numerical calculations and reduce the computational time, rotational symmetry is assumed. For large gap distances between the steel and copper cylinders the residual stress field is calculated to have a shape similar to that observed in butt welded pipes with maximum axial stress values at the yield stress level. For small gap distances the backing ring will come in contact with the steel cylinder which leads to large residual stresses in the backing ring. The maximum accumulated plastic strain in the weld metal and

  17. Feasibility evaluations for the integration of laser butt welding of tubes in industrial pipe coil production lines

    Science.gov (United States)

    Penasa, Mauro; Colombo, Enrico; Giolfo, Mauro

    1994-09-01

    Due to the good performance shown by laser welded joints, to the quality and repeatability achievable by this welding technique and to its high process productivity, a feature inherent to the laser technology which, together with its high flexibility, allows different operations to be performed by a single source, consistent savings in a production line may be obtained. Therefore laser welding techniques may be of high relevance for industrial applications, provided that a sufficient attention is paid to avoiding a low utilization time to the operating laser source. The paper describes a feasibility study for the integration of a laser source as an automatic unit for circumferential butt welding of tubes in production lines of pipe coils, just before the cold bending station. Using a 6 kW CO2 source, thickness ranging from 3.5 to 11.2 mm in carbon, low alloyed Cr-Mo and austenitic stainless steels, have been successfully welded. Cr-Mo steels require on line preheating treatment, which however can be achieved by laser defocused passes just before welding. The results of the preliminary qualification performed on laser welded joints of the involved topologies of product (materials, diameters and thicknesses) are described together with technological tests required for approval: laser circumferential butt welding of tubes has proven to be effective, with satisfactory and repeatable results and good joint performances. An exhaustive comparison with current welding techniques (TIG, MIG) is then carried out, along with a detailed analysis of the potential advantages and benefits which may be expected by using the laser welding technique, as well as with a first estimation of the investments and running costs. Since laser productivity is saturated only at a rough 35% during the year, an accurate analysis of other possible applications and of a possible lay out of a laser working cell integrated in the factory production lines is performed. Usually little attention is

  18. Demographic and Behavioral Characteristics of Osher Lifelong Learning Institute Members

    Science.gov (United States)

    Hansen, Robert Jack; Brady, E. Michael; Thaxton, Steven P.

    2016-01-01

    The number of lifelong learning institutes (LLIs) is growing across the United States and it is important for educational planners and administrators to know about current demographic and behavioral characteristics of program participants. A 14-question survey was administered via SurveyMonkey to members who use computers in eight Osher Lifelong…

  19. Assessment of NDE Methods on Inspection of HDPE Butt Fusion Piping Joints for Lack of Fusion with Validation from Mechanical Testing

    International Nuclear Information System (INIS)

    Anderson, Michael T.; Cinson, Anthony D.; Crawford, Susan L.; Doctor, Steven R.; Moran, Traci L.; Watts, Michael W.

    2010-01-01

    Studies at the Pacific Northwest National Laboratory (PNNL) in Richland, Washington, are being conducted to evaluate nondestructive examinations (NDE) coupled with mechanical testing of butt fusion joints in high-density polyethylene (HDPE) pipe for assessing lack of fusion. The work provides information to the U.S. Nuclear Regulatory Commission (NRC) on the effectiveness of volumetric inspection techniques of HDPE butt fusion joints in Section III, Division 1, Class 3, buried piping systems in nuclear power plants. This paper describes results from preliminary assessments using ultrasonic and microwave nondestructive techniques and mechanical testing with the high-speed tensile impact test and the side-bend test for determining joint integrity. A series of butt joints were fabricated in 3408, 12-in. IPS DR-11 HDPE material by varying the fusion parameters to create good joints and joints containing a range of lack-of-fusion conditions. Six of these butt joints were volumetrically examined with time-of-flight diffraction (TOFD), phased-array (PA) ultrasound, and the Evisive microwave system. The outer-diameter weld beads were removed for the microwave inspection. In two of the four pipes, both the outer and inner weld beads were removed and the pipe joints re-evaluated. The pipes were sectioned and the joints destructively evaluated with the side-bend test by cutting portions of the fusion joint into slices that were planed and bent. The last step in this limited study will be to correlate the fusion parameters, nondestructive, and destructive evaluation results to validate the effectiveness of what each NDE technology detects and what each does not detect. The results of the correlation will be used in identifying any future work that is needed.

  20. The study on defects in aluminum 2219-T6 thick butt friction stir welds with the application of multiple non-destructive testing methods

    International Nuclear Information System (INIS)

    Li, Bo; Shen, Yifu; Hu, Weiye

    2011-01-01

    Research highlights: → Friction stir weld-defect forming mechanisms of thick butt-joints. → Relationship between weld-defects and friction stir welding process parameters. → Multiple non-destructive testing methods applied to friction stir welds. → Empirical criterion basing on mass-conservation for inner material-loss defects. → Nonlinear correlation between weld strengths and root-flaw lengths. -- Abstract: The present study focused on the relationship between primary friction stir welding process parameters and varied types of weld-defect discovered in aluminum 2219-T6 friction stir butt-welds of thick plates, meanwhile, the weld-defect forming mechanisms were investigated. Besides a series of optical metallographic examinations for friction stir butt welds, multiple non-destructive testing methods including X-ray detection, ultrasonic C-scan testing, ultrasonic phased array inspection and fluorescent penetrating fluid inspection were successfully used aiming to examine the shapes and existence locations of different weld-defects. In addition, precipitated Al 2 Cu phase coarsening particles were found around a 'kissing-bond' defect within the weld stirred nugget zone by means of scanning electron microscope and energy dispersive X-ray analysis. On the basis of volume conservation law in material plastic deformation, a simple empirical criterion for estimating the existence of inner material-loss defects was proposed. Defect-free butt joints were obtained after process optimization of friction stir welding for aluminum 2219-T6 plates in 17-20 mm thickness. Process experiments proved that besides of tool rotation speed and travel speed, more other appropriate process parameter variables played important roles at the formation of high-quality friction stir welds, such as tool-shoulder target depth, spindle tilt angle, and fixture clamping conditions on the work-pieces. Furthermore, the nonlinear correlation between weld tensile strengths and weld crack

  1. Image Guided Radiation Therapy (IGRT) Practice Patterns and IGRT's Impact on Workflow and Treatment Planning: Results From a National Survey of American Society for Radiation Oncology Members

    Energy Technology Data Exchange (ETDEWEB)

    Nabavizadeh, Nima, E-mail: nabaviza@ohsu.edu [Department of Radiation Medicine, Oregon Health & Science University, Portland, Oregon (United States); Elliott, David A. [Department of Radiation Medicine, Oregon Health & Science University, Portland, Oregon (United States); Chen, Yiyi [Division of Biostatistics, Department of Public Health and Preventative Medicine, Oregon Health & Science University, Portland, Oregon (United States); Kusano, Aaron S. [Department of Radiation Oncology, University of Washington, Seattle, Washington (United States); Mitin, Timur; Thomas, Charles R.; Holland, John M. [Department of Radiation Medicine, Oregon Health & Science University, Portland, Oregon (United States)

    2016-03-15

    Purpose: To survey image guided radiation therapy (IGRT) practice patterns, as well as IGRT's impact on clinical workflow and planning treatment volumes (PTVs). Methods and Materials: A sample of 5979 treatment site–specific surveys was e-mailed to the membership of the American Society for Radiation Oncology (ASTRO), with questions pertaining to IGRT modality/frequency, PTV expansions, method of image verification, and perceived utility/value of IGRT. On-line image verification was defined as images obtained and reviewed by the physician before treatment. Off-line image verification was defined as images obtained before treatment and then reviewed by the physician before the next treatment. Results: Of 601 evaluable responses, 95% reported IGRT capabilities other than portal imaging. The majority (92%) used volumetric imaging (cone-beam CT [CBCT] or megavoltage CT), with volumetric imaging being the most commonly used modality for all sites except breast. The majority of respondents obtained daily CBCTs for head and neck intensity modulated radiation therapy (IMRT), lung 3-dimensional conformal radiation therapy or IMRT, anus or pelvis IMRT, prostate IMRT, and prostatic fossa IMRT. For all sites, on-line image verification was most frequently performed during the first few fractions only. No association was seen between IGRT frequency or CBCT utilization and clinical treatment volume to PTV expansions. Of the 208 academic radiation oncologists who reported working with residents, only 41% reported trainee involvement in IGRT verification processes. Conclusion: Consensus guidelines, further evidence-based approaches for PTV margin selection, and greater resident involvement are needed for standardized use of IGRT practices.

  2. Effect of Friction Stir Welding Parameters on the Mechanical and Microstructure Properties of the Al-Cu Butt Joint

    Directory of Open Access Journals (Sweden)

    Sare Celik

    2016-05-01

    Full Text Available Friction Stir Welding (FSW is a solid-state welding process used for welding similar and dissimilar materials. FSW is especially suitable to join sheet Al alloys, and this technique allows different material couples to be welded continuously. In this study, 1050 Al alloys and commercially pure Cu were produced at three different tool rotation speeds (630, 1330, 2440 rpm and three different tool traverse speeds (20, 30, 50 mm/min with four different tool position (0, 1, 1.5, 2 mm by friction stir welding. The influence of the welding parameters on the microstructure and mechanical properties of the joints was investigated. Tensile and bending tests and microhardness measurements were used to determine the mechanical properties. The microstructures of the weld zone were investigated by optical microscope and scanning electron microscope (SEM and were analyzed in an energy dispersed spectrometer (EDS. Intermetallic phases were detected based on the X-ray diffraction (XRD analysis results that evaluated the formation of phases in the weld zone. When the welding performance of the friction stir welded butt joints was evaluated, the maximum value obtained was 89.55% with a 1330 rpm tool rotational speed, 20 mm/min traverse speed and a 1 mm tool position configuration. The higher tensile strength is attributed to the dispersion strengthening of the fine Cu particles distributed over the Al material in the stir zone region.

  3. Study of Defect Sizing in Carbon Steel Butt Welds using Conventional Ultrasonic Technique and Phased Array Ultrasonic

    International Nuclear Information System (INIS)

    Amry Amin Abas; Noorhazleena Azaman; Mohd Yusnisyam Mohd Yusoff

    2016-01-01

    Ultrasonic testing is a proven reliable method which is able to detect and measure the size of defects in butt welds with acceptable tolerance. Recent advancement of technology has introduced a computerized technique which is phased array. Phased array employs focal law that enable focusing and steering of beam at the active aperture axis. This enables one line scanning but covering the whole weld volume as compared to conventional technique which employs aster scan and multiple probes to completely cover the whole weld volume. Phased array also gives multiple data view which assist the interpreter. This paper is about the study of these two techniques and technical analysis of comparison between the two. The conventional technique is performed using GE USM GO with 4 MHz 45 degrees shear wave probe. The phased array technique uses OLYMPUS OMNISCAN MX2 with 5L64 linear array probe with 16 elements aperture and 55 degrees wedge emitting shear wave into the specimen. Sensitivity of both techniques are based on 1.5 mm Side Drilled Hole. The results are compared and analysis such as defect sizing and defect type determination are performed. (author)

  4. Utilizing the geochemical data from the National Uranium Resource Evaluation (NURE) program: an evaluation of the Butte quadrangle, Montana

    International Nuclear Information System (INIS)

    Van Eeckhout, E.M.

    1980-12-01

    Some 1370 water and 1951 sediment samples were collected from 1994 locations in the Butte quadrangle, Montana, in 1976 and 1977 by the University of Montana for the Los Alamos Scientific Laboratory (LASL). The LASL analyzed the water samples for uranium and the sediment samples for uranium plus 42 additional elements. The data were then released to the Montana College of Mineral Science and Technology (MCMS and T), which was responsible for the evaluation of the uranium data. The data have subsequently been released by the LASL in an open-file report (Broxton, 1980). Statistical evaluations of the data were undertaken for uranium, copper, lead, zinc, manganese, gold, and silver. The uranium evaluations indicated certain areas in the western part of the quadrangle to be favorable for further investigation (particularly along the Rock Creek), as well as anomalous areas just north of Anaconda. The entire Boulder Batholith area had a high uranium background, but there didn't appear to be any particular site in this area that might be worth pursuing. The multielement evaluations confirmed the known base and precious metal provinces within the quadrangle. A methodology for evaluating data tapes from the National Uranium Resource Evaluation (NURE) program was developed and presented throughout this report. This methodology could be developed further to define areas worth exploring for commodities other than uranium

  5. A Study on the Optimal Welding Condition for Root-Pass in Horizontal Butt-Joint TIG Welding

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Sung Hun; Kim, Jae-Woong [Yeungnam Univ., Gyeongsan (Korea, Republic of)

    2017-04-15

    In this study, to investigate the shape of the back bead as a weld quality parameter and to select the optimal condition of the root-pass TIG welding of a horizontal butt-joint, an experimental design and the response surface method (RSM) have been employed. Three parameters are used as input variables, which include the base current, peak current, and welding speed. The back bead width is selected as an output variable representing the weld quality, the target value of the width is 5.4 mm. Conducting the experiments according to the Box-Behnken experimental design, a 2nd regression model for the back bead width was made, and the validation of the model was confirmed by using the F-test. The desirability function was designed through the nominal-the-best formula for the appropriate back bead width. Finally, the following optimal condition for welding was selected using the RSM: base current of 0.9204, peak current of 0.8676, and welding speed of 0.3776 in coded values. For verification, a test welding process under the optimal condition was executed and the result showed the back bead width of 5.38 mm that matched the target value well.

  6. A Study on the Optimal Welding Condition for Root-Pass in Horizontal Butt-Joint TIG Welding

    International Nuclear Information System (INIS)

    Jung, Sung Hun; Kim, Jae-Woong

    2017-01-01

    In this study, to investigate the shape of the back bead as a weld quality parameter and to select the optimal condition of the root-pass TIG welding of a horizontal butt-joint, an experimental design and the response surface method (RSM) have been employed. Three parameters are used as input variables, which include the base current, peak current, and welding speed. The back bead width is selected as an output variable representing the weld quality, the target value of the width is 5.4 mm. Conducting the experiments according to the Box-Behnken experimental design, a 2nd regression model for the back bead width was made, and the validation of the model was confirmed by using the F-test. The desirability function was designed through the nominal-the-best formula for the appropriate back bead width. Finally, the following optimal condition for welding was selected using the RSM: base current of 0.9204, peak current of 0.8676, and welding speed of 0.3776 in coded values. For verification, a test welding process under the optimal condition was executed and the result showed the back bead width of 5.38 mm that matched the target value well.

  7. Comparison of Corner-Butt 45 (Cb-45 and Corner-Lap (Cl joints in friction stir welding

    Directory of Open Access Journals (Sweden)

    Setiawan Widia

    2018-01-01

    Full Text Available The 10 mm thick Aluminum 6061 plates have been corner joined using varied design and those were 45° Corner Butt and Corner Lap Joints (CB-45 & CL. Friction tool was hardened EMS 45. True experimental method was used with independent parameters is feed rate which varied at 10 mm/min, 15 mm/min and 30 mm/min respectively. Other parameter such as rotating speed was kept constant. Experiment results show that, CB-45 yields better properties than CL. The tensile strength of CB-45 reaches 163.7 MPa for 10 mm/min feed rate. Whilst CL produces joint with tensile strength equal 120 MPa for equal parameters. Microstructure observation showed that CB-45 produces fine and homogenous appearance of MgO compared to CL. This phenomenon is caused by the pin of CB-45 joint which fully penetrates the nugget zone which is not found in CL design. This microstructure in turn promotes higher tensile strength of CB-45.

  8. Self-rated competency and education/programming needs for Care of the Older Adult with Cardiovascular Disease: a survey of the members of the Council of Cardiovascular Nursing.

    Science.gov (United States)

    Holm, Karyn; Chyun, Deborah; Lanuza, Dorothy M

    2006-01-01

    An online survey, Care of the Older Adult with Cardiovascular Disease (COA-CVD), was used to describe self-rated competency in the care of the aging adult with cardiovascular disease and subsequently determine the future education and programming needs of the Council of Cardiovascular Nursing. Respondents indicated that developing relationships, patient teaching, and assessment were areas where they felt most competent. The areas of highest priority for future programming included assessment of the older adult, diagnosis of health status, deriving a plan of care, implementing a treatment plan, patient teaching, and ensuring quality care. Most stated that content relative to the care of the older adult should be available at the annual meeting, Scientific Sessions of the American Heart Association, followed by self-study modules (65%), local and regional conferences (64%), and stand-alone national conferences (53%). The conclusions are that the Council of Cardiovascular Nursing and its membership need to address the importance of care of aging adults with cardiovascular disease and stroke in future programming. Although the Scientific Sessions of the American Heart Association is an appropriate venue, efforts can be directed toward developing self-study modules and local and regional conferences. As always, there is a need to work collaboratively with the other councils of the American Heart Association and other nursing organizations who view the care of the older adult as a high priority.

  9. The Members of the Agency

    International Nuclear Information System (INIS)

    2012-01-01

    The new Members since the last list of Member States was issued (INFCIRC/2/Rev.72) are Fiji and Togo, which deposited their instruments of acceptance of the Statute on 2 November 2012 and 1 November 2012, respectively. The Attachment hereto shows the dates on which the present 157 Member States deposited instruments of ratification or acceptance of the Statute with the depositary Government [ru

  10. The Members of the Agency

    International Nuclear Information System (INIS)

    2012-01-01

    The new Members since the last list of Member States was issued (INFCIRC/2/Rev.72) are Fiji and Togo, which deposited their instruments of acceptance of the Statute on 2 November 2012 and 1 November 2012, respectively. The Attachment hereto shows the dates on which the present 157 Member States deposited instruments of ratification or acceptance of the Statute with the depositary Government [fr

  11. The Members of the Agency

    International Nuclear Information System (INIS)

    1999-01-01

    The document lists the 129 Member States of the Agency as of 1 June 1999. The new Member since the last issue of the list (INFCIRC/2/51) is Benin. The dates on which the present 129 states became Members, and the state (Honduras) whose application for membership of the Agency has been recommended by the Board of Governors to be considered at the 43rd session of the General Conference are given in an Attachment

  12. The Members of the Agency

    International Nuclear Information System (INIS)

    2012-01-01

    The new Members since the last list of Member States was issued (INFCIRC/2/Rev.72) are Fiji and Togo, which deposited their instruments of acceptance of the Statute on 2 November 2012 and 1 November 2012, respectively. The Attachment hereto shows the dates on which the present 157 Member States deposited instruments of ratification or acceptance of the Statute with the depositary Government [es

  13. The Members of the Agency

    International Nuclear Information System (INIS)

    1995-01-01

    The new member since the last list of Member States of the Agency was issued (INFCIRC/2/Rev.44) is Yemen. The Attachment hereto shows the dates on which the 122 States became members of the Agency, as well as the State whose application for membership of the Agency was approved by the General Conference, but which has not yet deposited an instrument of acceptance of the Statute

  14. The Members of the Agency

    International Nuclear Information System (INIS)

    2014-01-01

    The new Members since the last list of Member States was issued (INFCIRC/2/Rev.75) are San Marino and the Bahamas, which deposited their instruments of acceptance of the Statute on 25 November 2013 and 7 January 2014, respectively. The Attachment hereto shows the dates on which the present 161 Member States deposited instruments of ratification or acceptance of the Statute with the depositary Government [es

  15. The members of the Agency

    International Nuclear Information System (INIS)

    1994-01-01

    The new members since the last list of Member States of the Agency was issued (INFCIRC/2/Rev.42) are: Armenia, Coratia, the Czech Republic, Lithuania, the Marshall Islands, the Slovak Republic and Uzbekistan. The Attachment to the circular shows the dates on which the 120 States became members of the Agency, as well as those States whose application for membership of the Agency was approved by the General Conference, but who have not yet deposited an instrument of acceptance of the Statute

  16. The Members of the Agency

    International Nuclear Information System (INIS)

    1998-01-01

    The document lists the 128 Member States of the Agency as of 18 September 1998. The new Member since the last issue of the list (INFCIRC/2/50) is Burkina Faso. In an attachment the dates on which the present 128 states became Members, and the state (Benin) whose application for membership of the Agency has been recommended by the Board of Governors to be considered at the 42nd session of the General Conference are given

  17. The Members of the Agency

    International Nuclear Information System (INIS)

    2014-01-01

    The new Members since the last list of Member States was issued (INFCIRC/2/Rev.75) are San Marino and the Bahamas, which deposited their instruments of acceptance of the Statute on 25 November 2013 and 7 January 2014, respectively. The Attachment hereto shows the dates on which the present 161 Member States deposited instruments of ratification or acceptance of the Statute with the depositary Government

  18. The Members of the Agency

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-02-13

    The new member since the last list of Member States of the Agency was issued (INFCIRC/2/Rev.44) is Yemen. The Attachment hereto shows the dates on which the 122 States became members of the Agency, as well as the State whose application for membership of the Agency was approved by the General Conference, but which has not yet deposited an instrument of acceptance of the Statute.

  19. The members of the Agency

    International Nuclear Information System (INIS)

    1998-01-01

    The document lists the 127 Member States of the Agency as of 1 January 1998. The new Members since the last issue of of the list (INFCIRC/2/49) are Malta and the Republic of Moldova. In an attachment are given the dates on which the present 127 states become Members, the state (Burkina Faso) whose application for membership of the Agency has been approved by the General Conference but which has not deposited an instrument of acceptance of the Statute

  20. The members of the Agency

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-15

    The document lists the 127 Member States of the Agency as of 1 January 1998. The new Members since the last issue of of the list (INFCIRC/2/49) are Malta and the Republic of Moldova. In an attachment are given the dates on which the present 127 states become Members, the state (Burkina Faso) whose application for membership of the Agency has been approved by the General Conference but which has not deposited an instrument of acceptance of the Statute.

  1. The Members of the Agency

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-09-18

    The document lists the 128 Member States of the Agency as of 18 September 1998. The new Member since the last issue of the list (INFCIRC/2/50) is Burkina Faso. In an attachment the dates on which the present 128 states became Members, and the state (Benin) whose application for membership of the Agency has been recommended by the Board of Governors to be considered at the 42nd session of the General Conference are given

  2. The Members of the Agency

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-06-16

    The document lists the 129 Member States of the Agency as of 1 June 1999. The new Member since the last issue of the list (INFCIRC/2/51) is Benin. The dates on which the present 129 states became Members, and the state (Honduras) whose application for membership of the Agency has been recommended by the Board of Governors to be considered at the 43rd session of the General Conference are given in an Attachment.

  3. The Members of the Agency

    International Nuclear Information System (INIS)

    2014-01-01

    The new Members since the last list of Member States was issued (INFCIRC/2/Rev.75) are San Marino and the Bahamas, which deposited their instruments of acceptance of the Statute on 25 November 2013 and 7 January 2014, respectively. The Attachment hereto shows the dates on which the present 161 Member States deposited instruments of ratification or acceptance of the Statute with the depositary Government [fr

  4. Noble Gas Isotope Evidence for Mantle Volatiles in the Cu-Mo Porphyry and Main Stage Polymetallic Veins at Butte, Montana

    Science.gov (United States)

    Hofstra, A. H.; Rusk, B. G.; Manning, A. H.; Hunt, A. G.; Landis, G. P.

    2017-12-01

    Recent studies suggest that volatiles released from mafic intrusions may be important sources of heat, sulfur, and metals in porphyry Cu-Mo-Au and epithermal Au-Ag deposits associated with intermediate to silicic stocks. The huge Cu-Mo porphyry and Main Stage polymetallic vein deposits at Butte are well suited to test this hypothesis because there is no geologic or isotopic evidence of basaltic intrusions in the mine or drill holes. The Butte porphyry-vein system is associated with quartz monzonite stocks and dikes within the southwest part of the Late Cretaceous Boulder batholith. The Boulder batholith was emplaced into Mesoproterozoic to Mesozoic sedimentary rocks and Late Cretaceous volcanic rocks. The Boulder batholith and Butte intrusions have Sri and eNd values indicative of crustal contamination. Eu and Ce anomalies in zircon from Butte intrusions provide evidence of oxidation due to magma degassing. To ascertain the source of volatiles in this system, 11 samples from the Cu-Mo porphyry and 16 from Main Stage veins were selected. The isotopic composition of Ar, Ne, and He extracted from fluid inclusions in quartz, magnetite, pyrite, chalcopyrite, sphalerite, galena, enargite, and covellite were determined. Helium isotopes exceed blank levels in all samples and Ne and Ar in some samples. On a 38Ar/36Ar vs. 40Ar/36Ar diagram, data plot near air. On a 20Ne/22Ne vs. 21Ne/22Ne diagram, data extend from air along the trajectories of OIB and MORB. On a 36Ar/4He vs. 3He/4He RA diagram, data extend from crust toward the air-mantle mixing line. The maximum 3He/4He RA values in the Cu-Mo porphyry (2.86) and Main Stage veins (3.46) are from pyrite and these values correspond to 36 and 43 % mantle helium. The Ne and He results show that fluid inclusions contain volatiles discharged from mantle magmas and that these volatiles were diluted by groundwater containing He derived from country rocks. Despite the lack of mafic intrusions in the Butte magmatic center, noble gas

  5. The Members of the Agency

    International Nuclear Information System (INIS)

    2001-01-01

    The new Members since the last list of Member States was issued (INFCIRC/2/Rev.54) are the Republic of Tajikistan, which deposited the instrument of acceptance of the Statute on 10 September 2001 and the Federal Republic of Yugoslavia, which deposited the instrument of acceptance of the Statute on 31 October 2001. The Attachment hereto shows the dates on which the present 133 Member States became Members. It also shows the States whose applications for membership of the Agency have been approved by the General Conference, but which have not yet deposited an instrument of acceptance of the Statute

  6. The members of the Agency

    International Nuclear Information System (INIS)

    1996-01-01

    The document lists the 124 Member States of the Agency as of 1 September 1996. The new Member since the last issue of the list (INFCIRC/2/Rev.47) is Georgia. In an attachment are given the dates on which the 124 Member States became Members, the State (Latvia) whose application for membership of the Agency has been approved by the General Conference but which has not yet deposited an instrument of acceptance of the Statute and the State (Republic of Moldova) whose application for membership has been recommended by the Board of Governors for approval by the General Conference

  7. The members of the Agency

    International Nuclear Information System (INIS)

    1996-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.46) is Bosnia and Herzegovina. The Attachment hereto shows the dates on which the present 123 Member States became Members. It also shows the States whose applications for membership of the Agency have been approved by the General Conference but which have not yet deposited an instrument of acceptance of the Statute and the State whose application for membership has been recommended by the Board of Governors for approval by the General Conference

  8. The Members of the Agency

    International Nuclear Information System (INIS)

    1995-01-01

    No new Member has joined the Agency since the last list of Member States was issued (INFCIRC/2/Rev.45). The Attachment hereto shows the dates on which the present 122 Member States became Members. It also shows the State whose application for membership of the Agency has been approved by the General Conference but which has not yet deposited an instrument of acceptance of the Statute and the States whose applications for membership have been recommended by the Board of Governors for approval by the General Conference

  9. The Members of the Agency

    International Nuclear Information System (INIS)

    2003-01-01

    The document lists the 136 Member States of the Agency as of 6 May 2003. The new Members since the last issue of the list (INFCIRC/2/57) are Eritrea and the Republic of Seychelles. Cambodia withdrew from the Agency with effect from 26 March 2003. The dates on which the present 136 Member States became Members are given in an Attachment. It also shows the States whose application for membership of the Agency has been approved by the General Conference but which has not yet deposited an instrument of acceptance of the Statute

  10. The members of the Agency

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-09-10

    The document lists the 124 Member States of the Agency as of 1 September 1996. The new Member since the last issue of the list (INFCIRC/2/Rev.47) is Georgia. In an attachment are given the dates on which the 124 Member States became Members, the State (Latvia) whose application for membership of the Agency has been approved by the General Conference but which has not yet deposited an instrument of acceptance of the Statute and the State (Republic of Moldova) whose application for membership has been recommended by the Board of Governors for approval by the General Conference.

  11. The Members of the Agency

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-11

    No new Member has joined the Agency since the last list of Member States was issued (INFCIRC/2/Rev.45). The Attachment hereto shows the dates on which the present 122 Member States became Members. It also shows the State whose application for membership of the Agency has been approved by the General Conference but which has not yet deposited an instrument of acceptance of the Statute and the States whose applications for membership have been recommended by the Board of Governors for approval by the General Conference.

  12. The members of the Agency

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-26

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.46) is Bosnia and Herzegovina. The Attachment hereto shows the dates on which the present 123 Member States became Members. It also shows the States whose applications for membership of the Agency have been approved by the General Conference but which have not yet deposited an instrument of acceptance of the Statute and the State whose application for membership has been recommended by the Board of Governors for approval by the General Conference.

  13. Patient and family members perspectives on radioactive iodine treatment

    Energy Technology Data Exchange (ETDEWEB)

    McGrath, P.; Fitch, M.I. [Toronto-Sunnybrook Regional Cancer Centre, Toronto, Ontario (Canada)

    1999-08-01

    This report documents the findings of a survey of patients who received radioactive iodine therapy and their family members. The main objective of the survey was to gain an understanding of the experience of receiving radioactive iodine from the patient and family's perspective. The data from this study helped to inform the ARCP and GMA as they developed AC-9 - Principles of the management of radionuclide therapies. A survey was distributed to 700 patients and family members through physicians at 8 sites across Canada. Locations included: Newfoundland, Nova Scotia, Ontario (2 sites), Quebec (2 sites), Manitoba and British Columbia. A total of 190 patients and 140 family members returned completed surveys. Data was analyzed separately for individuals treated as inpatients and those treated as outpatients. The results of the survey provided a perspective from patients and families about their experiences regarding radioactive iodine therapy. The data indicate variation in patients' and family members' perspectives about how precautions are to be implemented. Both patients and family members expressed the desire for more information regarding many aspects of the treatment experience. The results have implications for the development of patient information, continuing education (in particular in the areas of precaution), the provision of access to supportive and counselling services, and the importance of looking at the individual situations of patients and their families. (author)

  14. Patient and family members perspectives on radioactive iodine treatment

    International Nuclear Information System (INIS)

    McGrath, P.; Fitch, M.I.

    1999-08-01

    This report documents the findings of a survey of patients who received radioactive iodine therapy and their family members. The main objective of the survey was to gain an understanding of the experience of receiving radioactive iodine from the patient and family's perspective. The data from this study helped to inform the ARCP and GMA as they developed AC-9 - Principles of the management of radionuclide therapies. A survey was distributed to 700 patients and family members through physicians at 8 sites across Canada. Locations included: Newfoundland, Nova Scotia, Ontario (2 sites), Quebec (2 sites), Manitoba and British Columbia. A total of 190 patients and 140 family members returned completed surveys. Data was analyzed separately for individuals treated as inpatients and those treated as outpatients. The results of the survey provided a perspective from patients and families about their experiences regarding radioactive iodine therapy. The data indicate variation in patients' and family members' perspectives about how precautions are to be implemented. Both patients and family members expressed the desire for more information regarding many aspects of the treatment experience. The results have implications for the development of patient information, continuing education (in particular in the areas of precaution), the provision of access to supportive and counselling services, and the importance of looking at the individual situations of patients and their families. (author)

  15. Materials Delivered by Member States

    International Nuclear Information System (INIS)

    1969-01-01

    In this document the Director General is reporting to the Members of the Agency, under Article IX. G of the Statute, the quantities of materials delivered by Members up to 30 June 1969 in compliance with requests the Agency had made under Article IX. D

  16. Materials Delivered by Member States

    International Nuclear Information System (INIS)

    1975-01-01

    In this document the Director General is reporting to the Members of the Agency, under Article IX. G of the Statute, the quantities of materials which Members had delivered up to 30 June 1975, in compliance with requests the Agency had made under Article IX. D

  17. Materials Delivered by Member States

    International Nuclear Information System (INIS)

    1974-01-01

    In this document the Director General is reporting to the Members of the Agency, under Article IX. G of the Statute, the quantities of materials which Members had delivered up to 31 March 1974, in compliance with requests the Agency had made under Article IX. D

  18. Materials Delivered by Member States

    International Nuclear Information System (INIS)

    1971-01-01

    In this document the Director General is reporting to the Members of the Agency, under Article IX. G of the Statute, the quantities of materials which Members had delivered up to the end of 1970, in compliance with requests the Agency had made under Article IX. D

  19. Materials Delivered by Member States

    International Nuclear Information System (INIS)

    1973-01-01

    In this document the Director General is reporting to the Members of the Agency, under Article IX. G of the Statute, the quantities of materials which Members had delivered up to the end of 1972, in compliance with requests the Agency had made under Article IX. D

  20. Materials Delivered by Member States

    International Nuclear Information System (INIS)

    1972-01-01

    In this document the Director General is reporting to the Members of the Agency, under Article IX. G of the Statute, the quantities of materials which Members had delivered up to the end of 1971, in compliance with requests the Agency had made under Article IX. D

  1. Working with Difficult Group Members.

    Science.gov (United States)

    Kottler, Jeffrey A.

    1994-01-01

    Describes types of group members who are challenging in group settings including entitled, manipulative, and character-disordered clients. Provides suggestions for working with these group members, either as isolated cases or as homogenous populations, emphasizing the protection of other clients' rights. Includes 31 references. (Author/CRR)

  2. Basic numerical study on gap influence of residual stress and distortion during high-brightness laser butt welding

    International Nuclear Information System (INIS)

    Serizawa, Hisashi; Mori, Daiki; Murakawa, Hidekazu

    2013-01-01

    High-brightness laser such as fiber laser or disk laser is expected to minimize the total heat input energy in welding due to its high beam quality, and the welding residual stress and distortion also seem to be reduced as a result. However, the diameter of high-brightness laser beam is less than 0.6 mm and it is difficult to set the beam position to contact face between two parts because in general there would be a gap due to quality of parts. In this study, in order to reveal the effect of gap on the residual stress and the welding distortion during fiber laser welding, the butt welding of two plates were examined through the thermal elastic-plastic analysis with a new gap element. From the result of thermal analyses, it was found that the homogeneous ellipsoid body could be applicable to model the shape of heat source for the fiber laser and the gap width would not influence the penetration shape when the gap width was changed from 0.1 to 0.25 mm. In addition, the elastic-plastic analyses indicated that the transverse shrinkage slightly increased with increasing the gap width, while this shrinkage without gap was much smaller than that with gap. Also, it was revealed that the welding speed largely affects both the welding residual stress and distortion. Moreover, it was found that the residual stress was almost independent of the jig position, while the position of fixtures slightly affected the transverse shrinkage. (author)

  3. Butt Welding of 2205/X65 Bimetallic Sheet and Study on the Inhomogeneity of the Properties of the Welded Joint

    Science.gov (United States)

    Gou, Ning-Nian; Zhang, Jian-Xun; Wang, Jian-Long; Bi, Zong-Yue

    2017-04-01

    The explosively welded 2205 duplex stainless steel/X65 pipe steel bimetallic sheets were butt jointed by multilayer and multi-pass welding (gas tungsten arc welding for the flyer and gas metal arc welding for the transition and parent layers of the bimetallic sheets). The microstructure and mechanical properties of the welded joint were investigated. The results showed that in the thickness direction, microstructure and mechanical properties of the welded joint exhibited obvious inhomogeneity. The microstructures of parent filler layers consisted of acicular ferrite, widmanstatten ferrite, and a small amount of blocky ferrite. The microstructure of the transition layer and flyer layer consisted of both austenite and ferrite structures; however, the transition layer of weld had a higher volume fraction of austenite. The results of the microhardness test showed that in both weld metal (WM) and heat-affected zone (HAZ) of the parent filler layers, the average hardness decreased with the increasing (from parent filler layer 1 to parent filler layer 3) welding heat input. The results of hardness test also indicated that the hardness of the WM and the HAZ for the flyer and transition layers was equivalent. The tensile test combined with Digital Specklegram Processing Technology demonstrated that the fracturing of the welded joint started at the HAZ of the flyer, and then the fracture grew toward the base metal of the parent flyer near the parent HAZ. The stratified impact test at -5 °C showed that the WM and HAZ of the flyer exhibited lower impact toughness, and the fracture mode was ductile and brittle mixed fracture.

  4. The Members of the Agency

    International Nuclear Information System (INIS)

    1997-01-01

    The document lists the 125 Member States of the Agency as of 1 September 1997. The new Member since the last issue of the list (INFCIRC/2/Rev.48) is Latvia. In an Attachment are given the dates on which the present 125 States became Members, the State (Republic of Moldova) whose application for membership of the Agency has been approved by the General Conference but which has not yet deposited an instrument of acceptance of the Statute and the States (Malta and Burkina Faso) whose applications for membership have been recommended by the Board of Governors for approval by the General Conference

  5. The Members of the Agency

    International Nuclear Information System (INIS)

    1994-01-01

    The new members since the last list of Member States of the Agency was issued (INFCIRC/2/Rev.43) are: Kazakhstan and the former Yugoslav Republic of Macedonia. The Democratic People's Republic of Korea withdrew from membership of the Agency as of 13 June 1994. The Attachment hereto shows the dates on which the 121 States became members of the Agency, as well as those States whose application for membership of the Agency was approved by the General Conference, but who have not yet deposited an instrument of acceptance of the Statute

  6. The Members of the Agency

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-22

    The document lists the 125 Member States of the Agency as of 1 September 1997. The new Member since the last issue of the list (INFCIRC/2/Rev.48) is Latvia. In an Attachment are given the dates on which the present 125 States became Members, the State (Republic of Moldova) whose application for membership of the Agency has been approved by the General Conference but which has not yet deposited an instrument of acceptance of the Statute and the States (Malta and Burkina Faso) whose applications for membership have been recommended by the Board of Governors for approval by the General Conference.

  7. Thermal effects in concrete members

    International Nuclear Information System (INIS)

    Kar, A.K.

    1977-01-01

    The proposed method of analysis for concrete members subjected to temperature changes is consistent with the requirements of ultimate strength design. This also facilitates the provision of the same safety margin as for other loads. Due to cracks and creep in concrete, thermal stresses are nonlinear; they are dependent on the effective member stiffness, which in turn vary with the magnitude of loading. Therefore it is inconsistent to have an ultimate strength design in conjunction with an analysis based on the linear elastic theory. It is proposed that when the requirements of serviceability are met, the neutral axis corresponding to the ultimate load capacity conditions be considered for temperature-induced loadings. This conforms with the fact that the thermal load, because of creep and formation of cracks in the member, can be self-relieving as the failure load condition or ultimate capacity is approached. The maximum thermal load that can develop in dependent on the effective cross section of the member. Recommendations are made for determining the average effective member stiffness, which lies between the stiffness corresponding to the cracked (at ultimate condition) and the uncracked sections. In the proposed method, thermal stresses are not considered completely self-relieving. The stresses are considered simultaneously with stresses resulting from other causes. A step-by-step approach is presented for analysis and design of concrete members subjected to temperature changes

  8. Nuclear energy : member survey provides basis for common ground

    International Nuclear Information System (INIS)

    Hartley, Rolfe

    2006-01-01

    There is a lot of misinformation to the general public about the nuclear energy and renewable energy and also the greenhouse effect is just as controversial. There is a need to educate general public that nuclear is a low greenhouse energy source. There are other energy sources, such as solar, wind, hydro and geothermal. The most important aspect is the effective management of these sources

  9. What Made Them Successful: An Introspective Survey of AAPS Members

    Directory of Open Access Journals (Sweden)

    Pamela A. Rudnicki, BS

    2015-03-01

    Conclusion: The authors believe that recognizing the relative importance of such factors, and their associated biases, is essential for the process of selecting and developing future successful plastic surgeons.

  10. Burnout in Female Faculty Members.

    Science.gov (United States)

    Cassidy-Vu, Lisa; Beck, Keli; Moore, Justin B

    2017-04-01

    Despite approximately equal numbers of male and female medical school graduates, women are entering academic medicine at a lower rate than their male colleagues. Of those who do assume a faculty position, female faculty members report higher levels of burnout, often attributable to gender-specific difficulties in clinical expectations and maintenance of work-life balance. Many of these struggles are attributable to issues that are amenable to supportive policies, but these policies are inconsistent in their availability and practice. This commentary presents evidence for inconsistencies in the day-to-day experience of female faculty members, and proposes solutions for the mitigation of the challenges experienced more often by female faculty members with the goal of diversifying and strengthening academic medicine.

  11. Materials Delivered by Member States

    International Nuclear Information System (INIS)

    1966-01-01

    The information given in this document is divided into two parts. In part I the Director General is reporting to the Members of the Agency, under Article IX. G of the Statute, the quantities of materials delivered by Members up to 31 December 1965 in compliance with requests the Agency had made under Article IX. D. Part III contains information about materials which had not been delivered by 31 December but which had been allocated, in accordance with Article XI. F. 1 of the Statute, to approved Agency projects for which project arrangements were in force on that date

  12. Materials Delivered by Member States

    International Nuclear Information System (INIS)

    1965-01-01

    The information given in this document is divided into two parts. In part I the Director General is reporting to the Members of the Agency, under Article IX. G of the Statute, the quantities of materials delivered by Members up to 31 December 1964 in compliance with requests the Agency had made under Article IX. D. Part II contains information about materials which had not been delivered by 31 December but which had been allocated, in accordance with Article XI. F. 1 of the Statute, to approved Agency projects for which project arrangements were in force on that date

  13. Materials Delivered by Member States

    International Nuclear Information System (INIS)

    1968-01-01

    The information given in this document is divided into two parts. In part I the Director General is reporting to the Members of the Agency, under Article IX. G of the Statute, the quantities of materials delivered by Members up to 30 June 1968 in compliance with requests the Agency had made under Article IX,D. Part II contains information about materials which had not been delivered by 30 June 1968 but which had been allocated, in accordance with Article XI.F.I of the Statute, to approved Agency projects for which project arrangements were in force on that date

  14. Effects of Post-Weld Heat Treatment on the Microstructure and Toughness of Flash Butt Welded High-Strength Low-Alloy Steel

    Science.gov (United States)

    Shajan, Nikhil; Arora, Kanwer Singh; Asati, Brajesh; Sharma, Vikram; Shome, Mahadev

    2018-04-01

    Effect of post-weld heat treatment on the weld microstructure, texture, and its correlation to the toughness of flash butt welded joints were investigated. Upon flash butt welding, the α and γ-fiber in the parent material converted to Goss (110)[001], rotated Goss (110)[1 \\bar{1} 0], and rotated cube (001)[1 \\bar{1} 0], (001)[ \\overline{11} 0] textures along the fracture plane. Formation of these detrimental texture components was a result of shear deformation and recrystallization of austenite at temperatures above T nr resulting in a drop of toughness at the weld zone. Inter-critical and sub-critical annealing cycles proved to be less effective in reducing the Goss (110)[001], rotated Goss (110)[1 \\bar{1} 0], and rotated cube (001)[1 \\bar{1} 0], (001)[ \\overline{11} 0] texture components, and therefore, toughness values remained unaffected. Post-weld heat treatment in the austenite phase field at 1000 °C for 5 seconds resulted in the formation of new grains with different orientations leading to a reduction in the texture intensities of both Goss and rotated Goss components and therefore improved weld zone toughness. Prolonged annealing time was found to be ineffective in improving the toughness due to grain growth.

  15. On detection and automatic tracking of butt weld line in thin wall pipe welding by a mobile robot with visual sensor

    International Nuclear Information System (INIS)

    Suga, Yasuo; Ishii, Hideaki; Muto, Akifumi

    1992-01-01

    An automatic pipe welding mobile robot system with visual sensor was constructed. The robot can move along a pipe, and detect the weld line to be welded by visual sensor. Moreover, in order to make an automatic welding, the welding torch can track the butt weld line of the pipes at a constant speed by rotating the robot head. Main results obtained are summarized as follows: 1) Using a proper lighting fixed in front of the CCD camera, the butt weld line of thin wall pipes can be recongnized stably. In this case, the root gap should be approximately 0.5 mm. 2) In order to detect the weld line stably during moving along the pipe, a brightness distribution measured by the CCD camera should be subjected to smoothing and differentiating and then the weld line is judged by the maximum and minimum values of the differentials. 3) By means of the basic robot system with a visual sensor controlled by a personal computer, the detection and in-process automatic tracking of a weld line are possible. The average tracking error was approximately 0.2 mm and maximum error 0.5 mm and the welding speed was held at a constant value with error of about 0.1 cm/min. (author)

  16. New Faculty Members' Emotions: A Mixed-Method Study

    Science.gov (United States)

    Stupnisky, Robert H.; Pekrun, Reinhard; Lichtenfeld, Stephanie

    2016-01-01

    The current study developed when new faculty members spontaneously reported discrete emotions during focus groups exploring the factors affecting their success. Qualitative analysis using the framework of Pekrun's control-value theory of emotions revealed 18 different emotions with varying frequencies. A follow-up survey of 79 new faculty members…

  17. The Impact of Having Children on Party Member Activism

    DEFF Research Database (Denmark)

    Kosiara-Pedersen, Karina

    2014-01-01

    party member survey of 2012, analyses show: First, the cost of having children is more important when explaining more demanding activities than the less demanding activities, and, second, the impact of the cost of having children in the household is larger when including the intensity of participation...

  18. Improving Acceptance, Integration, and Health Among LGBT Service Members

    Science.gov (United States)

    2017-10-01

    through multiple rounds of internal testing and quality assurance procedures. Recruitment for the Phase II survey was initiated on August 25, 2017...Award Numbers: W81XWH-15-1-0701 Title: Improving Acceptance, Integration, and Health Among LGBT Service Members Principal Investigators...burden to Department of Defense, Washington Headquarters Services , Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis

  19. HYDRAULICS, BUTTE COUNTY, USA

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — Recent developments in digital terrain and geospatial database management technology make it possible to protect this investment for existing and future projects to...

  20. Slovenia joins IPPOG as member

    CERN Multimedia

    'marcelloni, claudia

    2018-01-01

    Slovenia became an official member of IPPOG on 19 April 2018. The MOU was signed by the head of Particle Physics Department at Jozef Stefan Institute representing Slovenia participation at IPPOG. Andrej Gorišek, country representative for Slovenia in IPPOG, brought the document to the meeting in Italy where IPPOG chairs signed it, confirming Slovenia membership to the collaboration.

  1. Mental Wellbeing of Family Members of Autistic Adults.

    Science.gov (United States)

    Herrema, Renske; Garland, Deborah; Osborne, Malcolm; Freeston, Mark; Honey, Emma; Rodgers, Jacqui

    2017-11-01

    Family members are often the primary caregiver for autistic adults and this responsibility may impact on the carer's wellbeing and quality of life. 109 family members of autistic adults completed an online survey assessing their wellbeing relating to their caring role for their autistic relative. Family members who were supporting an autistic relative with co-occurring mental health difficulties and who they reported as unprepared for the future, self-reported higher levels of worry, depression, anxiety and stress, and poorer quality of life. These findings emphasise the importance of support for family members of autistic adults, whether through external services to support their relative or individual mental health support for the carer.

  2. Understanding Heterogeneous Preferences of Cooperative Members

    NARCIS (Netherlands)

    Kalogeras, N.; Pennings, J.M.E.; Lans, van der I.A.; Garcia, P.; Dijk, van G.

    2009-01-01

    We study the heterogeneity in the preference structure of cooperative members. Using conjoint analysis the utility that members attach to intra-organizational and strategic attributes of their cooperative is elicited. Recognizing that members are not homogenous, a concomitant finitemixture

  3. Busted Butte : final report on laboratory radionuclide migration experiments in non-welded tuff under unsaturated and saturated conditions

    International Nuclear Information System (INIS)

    Vandergraaf, T.T.; Drew, D.J.; Ticknor, K.V.; Hamon, C.J.

    2004-01-01

    Three blocks of non-welded tuff, one nominally one cubic foot (trial block) in volume and the other two, nominally one cubic meter (1 m 3 ) in volume, were excavated from the Busted Butte Test Facility on the Nevada Test Site in 1999 and transported to the Atomic Energy of Canada Limited Whiteshell Laboratories in Pinawa, Manitoba. The trial block and one of the 1-m 3 blocks were used for radionuclide migration experiments under unsaturated conditions; the remaining 1-m3 block was used for similar migration experiments under saturated conditions. After a vertical flow of synthetic transport solution was set up under unsaturated conditions, a suite of conservative and chemically reactive radionuclide tracers was injected at volumetric flow rates of 20 mL/hr in the trial block, and 10 mL/hr in two locations on the upper surface of the 1-m 3 block. These flow rates correspond to infiltration rates of about 120 cm/year and about 17 cm/year, respectively. The duration of the migration experiment in the trial block was 87 days, while the migration experiment in the 1-m3 block was performed for a period of 588 days. Results obtained from the migration experiment in the trial block showed that transport of 95m+99 Tc, injected as the pertechnetate (an)ion, was slightly faster than that of the transport solution, using tritiated water ( 3 H 2 0) as a flow indicator. Retardation of 237 Np was consistent with that predicted from results obtained in supporting static batch sorption studies. Post-migration analysis of the flow field in the trial block showed that the front of the 22 Na plume had migrated about half the distance through the block, and that 60 Co and 137 Cs had been retained near the inlet. This observation agrees qualitatively with that predicted from the results obtained in static batch sorption studies. In the larger-scale experiment, the transport behavior of Tc was also very similar to that of the transport solution. None of the other radionuclide tracers

  4. Community Members Draw the Line

    Directory of Open Access Journals (Sweden)

    Gregory Freeland

    2014-06-01

    Full Text Available This study investigates whether a community-based task force’s redistricting plan in Ventura County, California, positively affected fair representation, social equity issues, community interests, and the electoral process. Examination and evaluation of the organizational strategies and collaborations involved in the task force’s redistricting process find that the Board of Supervisors districts that members of the community drew were successful in improving and maintaining fair representation. This finding is based on comparing supervisorial votes and policies with community members’ votes on state propositions and local measures, in addition to conducting interviews with task force members, politicians, and community activists. This study finds that citizen participation in governmental processes improves overall community health and political participation.

  5. Power reactors in member states

    International Nuclear Information System (INIS)

    1975-01-01

    This is the first issue of a periodical computer-based listing of civilian nuclear power reactors in the Member States of the IAEA, presenting the situation as of 1 April 1975. It is intended as a replacement for the Agency's previous annual publication of ''Power and Research Reactors in Member States''. In the new format, the listing contains more information about power reactors in operation, under construction, planned and shut down. As far as possible all the basic design data relating to reactors in operation have been included. In future these data will be included also for other power reactors, so that the publication will serve to give a clear picture of the technical progress achieved. Test and research reactors and critical facilities are no longer listed. Of interest to nuclear power planners, nuclear system designers, nuclear plant operators and interested professional engineers and scientists

  6. New offer for our members

    CERN Document Server

    Staff Association

    2018-01-01

    Evolution 2, your specialist for Outdoor Adventures Be it for a ski lesson, a parachute jump or for a mountain bike descent, come live an unforgettable experience with our outdoor specialists. Benefit from a 10 % discount on all activities: Offer is open to SA members and their family members living in the same household, upon presentation of the membership card. Offer available for all bookings made between 1 June 2018 and 30 May 2019. Offer available on all the Evoltion2 sites. A wide range of summer and winter activities. More information on http://evolution2.com/ Contact and reservation : +33 (0)4.50.02.63.35 management@evolution2.com

  7. Materials Delivered by Member States

    International Nuclear Information System (INIS)

    1962-01-01

    The information given in this document is divided into two parts. In part I the Director General is reporting to the Members of the Agency, under Article IX. G of the Statute, the quantities of materials delivered up to 30 September 1962 by Member States in compliance with requests the Agency has made under Article IX. D. Part II contains information about materials which have not yet been delivered but which have been allocated, in accordance with Article XI. F. 1 of the Statute, to approved Agency projects for which project agreements were in force on 30 September 1962. Reports on subsequent deliveries of materials and revised information about allocated but undelivered materials will be issued from time to time

  8. Communication Among Melanoma Family Members

    Science.gov (United States)

    Bowen, Deborah J; Albrecht, Terrance; Hay, Jennifer; Eggly, Susan; Harris-Wei, Julie; Meischke, Hendrika; Burke, Wylie

    2017-01-01

    Interventions to improve communication among family members may facilitate information flow about familial risk and preventive health behaviors. This is a secondary analysis of the effects of an interactive website intervention aimed at increasing communication frequency and agreement about health risk among melanoma families. Participants were family units, consisting of one family member with melanoma identified from a previous research study (the case) and an additional first degree relative and a parent of a child 0–17. Family triads were randomized to receive access to the website intervention or to serve as control families. Family communication frequency and agreement about melanoma prevention behaviors and beliefs were measured at baseline and again at one year post randomization. Intervention participants of all three types significantly increased the frequency of communication to their first degree relatives (Parents, siblings, children; range =14–18 percentage points; all pcommunication about cancer risk. PMID:28248624

  9. New support line for members

    Science.gov (United States)

    AGU has recently established a new customer "support line"—solutions@agu.org—as the point of contact on AGU's staff for members and other individual constituents who have not been able to resolve issues or get questions answered promptly or to their satisfaction through customary channels.Over the past year, there have been many changes at AGU. Unfortunately—and perhaps as a result of these changes—communication with members and individual constituents has suffered. Some individuals report, for example, that e-mail messages are not answered to their satisfaction, or in a timely manner. Instructions on AGU's Web site are unclear in some areas. Problems related specifically to the transition to electronic publishing are cropping up.

  10. Towards mobile staff members management

    Science.gov (United States)

    Encheva, Sylvia

    2017-07-01

    Todays project management requires a number of abilities which involve finding quick solutions to shortage of staff members with possession of specific qualities. When persons with team responsibilities are under pressure or due to various circumstances are unable to perform exhaustive search in databases, an interactive visualization tool can come in quite handy in finding good solutions unforeseen occurrences. In particular we propose application of selected graphs for facilitating mobile human resource management.

  11. Shielding member for thermonuclear device

    Energy Technology Data Exchange (ETDEWEB)

    Onozuka, Masanori

    1997-06-30

    In a thermonuclear device for shielding fast neutrons by shielding members disposed in a shielding vessel (vacuum vessel and structures such as a blanket disposed in the vacuum vessel), the shielding member comprises a large number of shielding wires formed fine and short so as to have elasticity. The shielding wires are sealed in a shielding vessel together with water, and when the width of the shielding vessel is changed, the shielding wires follow after the change of the width while elastically deforming in the shielding vessel, so that great stress and deformation are not formed thereby enabling to improve reliability. In addition, the length, the diameter and the shape of each of the shielding wires can be selected in accordance with the shielding space of the shielding vessel. Even if the shape of the shielding vessel is complicated, the shielding wires can be inserted easily. Accordingly, the filling rate of the shielding members can be changed easily. It can be produced more easily compared with a conventional spherical pebbles. It can be produced more easily than existent spherical shielding pebbles thereby enabling to reduce the production cost. (N.H.)

  12. Surveying Future Surveys

    Science.gov (United States)

    Carlstrom, John E.

    2016-06-01

    The now standard model of cosmology has been tested and refined by the analysis of increasingly sensitive, large astronomical surveys, especially with statistically significant millimeter-wave surveys of the cosmic microwave background and optical surveys of the distribution of galaxies. This talk will offer a glimpse of the future, which promises an acceleration of this trend with cosmological information coming from new surveys across the electromagnetic spectrum as well as particles and even gravitational waves.

  13. Effect of current and speed on porosity in autogenous Tungsten Inert Gas (TIG) welding of aluminum alloys A1100 butt joint

    Science.gov (United States)

    Milyardi, Indra; Sunar Baskoro, Ario

    2018-04-01

    Autogenous Tungsten Inert Gas (TIG) welding has been conducted on aluminum alloy A1100. The purpose of this research is to determine the proper current and speed of autogenous TIG welding with butt joint pattern. Variations on welding current are 150 A, 155 A, and 160 A with the variations on welding speed are 1 mm/seconds, 1.1 mm/seconds, 1.2 mm/seconds. The welded results were tested using non-destructive test (NDT) method using X-Ray radiography. After the test, it is found that the appropriate current for the best result without porosity can be achieved using the welding parameter of welding current of 160 A and the welding speed of 1.1 mm seconds.

  14. Influences of post weld heat treatment on tensile strength and microstructure characteristics of friction stir welded butt joints of AA2014-T6 aluminum alloy

    Science.gov (United States)

    Rajendran, C.; Srinivasan, K.; Balasubramanian, V.; Balaji, H.; Selvaraj, P.

    2016-08-01

    Friction stir welded (FSWed) joints of aluminum alloys exhibited a hardness drop in both the advancing side (AS) and retreating side (RS) of the thermo-mechanically affected zone (TMAZ) due to the thermal cycle involved in the FSW process. In this investigation, an attempt has been made to overcome this problem by post weld heat treatment (PWHT) methods. FSW butt (FSWB) joints of Al-Cu (AA2014-T6) alloy were PWHT by two methods such as simple artificial aging (AA) and solution treatment followed by artificial aging (STA). Of these two treatments, STA was found to be more beneficial than the simple aging treatment to improve the tensile properties of the FSW joints of AA2014 aluminum alloy.

  15. Experimental and analytical study of the DC breakdown characteristics of polypropylene laminated paper with a butt gap condition considering the insulation design of superconducting cable

    Science.gov (United States)

    Seo, In-jin; Choi, Won; Seong, Jae-gyu; Lee, Bang-wook; Koo, Ja-yoon

    2014-08-01

    It has been reported that the insulation design under DC stress is considered as one of the critical factors in determining the performance of high-voltage direct current (HVDC) superconducting cable. Therefore, it is fundamentally necessary to investigate the DC breakdown characteristics of the composite insulation system consisting of liquid nitrogen (LN2)/polypropylene-laminated-paper (PPLP). In particular, the insulation characteristics under DC polarity reversal condition should be verified to understand the polarity effect of the DC voltage considering the unexpected incidents taking place at line-commutated-converters (LCC) under service at a DC power grid. In this study, to examine the variation of DC electric field strength, the step voltage and polarity reversal breakdown tests are performed under DC stress. Also, we investigate the electric field distributions in a butt gap of the LN2/PPLP condition considering the DC polarity reversal by using simulation software.

  16. Optimization of GMAW process of AA 6063-T5 aluminum alloy butt joints based on the response surface methodology and on the bead geometry

    International Nuclear Information System (INIS)

    Miguel, V.; Martinez-Conesa, E. J.; Segura, F.; Manjabacas, M. C.; Abellan, E.

    2012-01-01

    The geometry of the weld beads is characterized by the overhead, the width and the penetration. These values are indices of the behavior of the welded joint and therefore, they can be considered as factors that control the process. This work is performed to optimize the GMAW process of the aluminum alloy AA 6063-T5 by means of the response surface methodology (RSM). The variables herein considered are the arc voltage, the welding speed, the wire feed speed and the separation between surfaces in butt joints. The response functions that are herein studied are the overhead, the width, the penetration and the angle of the bead. The obtained results by RSM show high grade of agreement with the experimental values. The procedure is experimentally validated by welding for the theoretically obtained optimized technological conditions and a wide agreement between theoretical and experimental values is found. (Author) 16 refs.

  17. Field performance of wood-burning and coal-burning appliances in Crested Butte during the 1989-90 heating season. Final report

    International Nuclear Information System (INIS)

    Jaasma, D.R.; Champion, M.R.; Gundappa, M.

    1991-10-01

    The field performance of woodburning and coalburning appliances in and around Crested Butte, CO, has been evaluated. Measurements included particulate matter (PM), carbon monoxide (CO), and weekly average burn rates. Woodburning appliances included conventional airtight stoves, EPA-certified catalytic stoves, and EPA-certified noncatalytic stoves. Compared to the emissions measured from conventional stoves, the certified stoves reduced PM emission factors (g/kg) by 53% and CO emission factors by 49%. Coalburning appliances included a commercial scale boiler, a residential stoker, and hand-fired coalstove. The coalburning appliances were compared to conventional woodstoves on a grams of pollutant per joule of heat output basis. The automatically stoked coal appliances reduced PM and CO emissions by roughly 84% and 85%, respectively. The hand-fired stove was cleaner than expected, reducing PM by 55% and CO by 27%

  18. 7 CFR 1425.19 - Member cooperatives.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Member cooperatives. 1425.19 Section 1425.19... OF AGRICULTURE LOANS, PURCHASES, AND OTHER OPERATIONS COOPERATIVE MARKETING ASSOCIATIONS § 1425.19 Member cooperatives. A CMA may obtain loans or LDP's on behalf of a member cooperative when the member...

  19. Busted Butte Unsaturated Zone Transport Test: Fiscal Year 1998 Status Report Yucca Mountain Site Characterization Program Deliverable SPU85M4

    International Nuclear Information System (INIS)

    Bussod, G.Y.; Turin, H.J.; Lowry, W.E.

    1999-01-01

    This report describes the status of the Busted Butte Unsaturated Zone Transport Test (UZTT) and documents the progress of construction activities and site and laboratory characterization activities undertaken in fiscal year 1998. Also presented are predictive flow-and-transport simulations for Test Phases 1 and 2 of testing and the preliminary results and status of these test phases. Future anticipated results obtained from unsaturated-zone (UZ) transport testing in the Calico Hills Formation at Busted Butte are also discussed in view of their importance to performance assessment (PA) needs to build confidence in and reduce the uncertainty of site-scale flow-and-transport models and their abstractions for performance for license application. The principal objectives of the test are to address uncertainties associated with flow and transport in the UZ site-process models for Yucca Mountain, as identified by the PA working group in February 1997. These include but are not restricted to: (1) The effect of heterogeneities on flow and transport in unsaturated and partially saturated conditions in the Calico Hills Formation. In particular, the test aims to address issues relevant to fracture-matrix interactions and permeability contrast boundaries; (2) The migration behavior of colloids in fractured and unfractured Calico Hills rocks; (3) The validation through field testing of laboratory sorption experiments in unsaturated Calico Hills rocks; (4) The evaluation of the 3-D site-scale flow-and-transport process model (i.e., equivalent-continuum/dual-permeability/discrete-fracture-fault representations of flow and transport) used in the PA abstractions for license application; and (5) The effect of scaling from lab scale to field scale and site scale

  20. THE COOLEST ISOLATED BROWN DWARF CANDIDATE MEMBER OF TWA

    Energy Technology Data Exchange (ETDEWEB)

    Gagné, Jonathan; Lafrenière, David; Doyon, René; Malo, Lison; Artigau, Étienne [Département de Physique and Observatoire du Mont-Mégantic, Université de Montréal, C.P. 6128 Succ. Centre-ville, Montréal, Qc H3C 3J7 (Canada); Faherty, Jacqueline K. [Department of Terrestrial Magnetism, Carnegie Institution of Washington, Washington, DC 20015 (United States); Cruz, Kelle, E-mail: jonathan.gagne@astro.umontreal.ca, E-mail: jfaherty17@gmail.com [Department of Astrophysics, American Museum of Natural History, Central Park West at 79th Street, New York, NY 10034 (United States)

    2014-04-10

    We present two new late-type brown dwarf candidate members of the TW Hydrae association (TWA): 2MASS J12074836-3900043 and 2MASS J12474428-3816464, which were found as part of the BANYAN all-sky survey (BASS) for brown dwarf members of nearby young associations. We obtained near-infrared (NIR) spectroscopy for both objects (NIR spectral types are respectively L1 and M9), as well as optical spectroscopy for J1207-3900 (optical spectral type is L0γ), and show that both display clear signs of low gravity, and thus youth. We use the BANYAN II Bayesian inference tool to show that both objects are candidate members to TWA with a very low probability of being field contaminants, although the kinematics of J1247-3816 seem slightly at odds with that of other TWA members. J1207-3900 is currently the latest-type and the only isolated L-type candidate member of TWA. Measuring the distance and radial velocity of both objects is still required to claim them as bona fide members. Such late-type objects are predicted to have masses down to 11-15 M {sub Jup} at the age of TWA, which makes them compelling targets to study atmospheric properties in a regime similar to that of currently known imaged extrasolar planets.

  1. Investigating the need for scholarly communications positions in Association of Academic Health Sciences Libraries member institutions

    Directory of Open Access Journals (Sweden)

    Kim Mears, MLIS

    2017-04-01

    Discussion: Our survey reveals a juxtaposition occurring in AAHSL member libraries. While administrators acknowledge the need to provide scholarly communications services, they often experience budget challenges in providing a full-time position for these services.

  2. Factors affecting members' evaluation of agri-business ventures' effectiveness.

    Science.gov (United States)

    Hashemi, Seyyed Mahmoud; Hedjazi, Yousef

    2011-02-01

    This paper presents work to identify factors affecting effectiveness of agri-business ventures (A-BVs) on the side of providers as perceived by their members. A survey was conducted among 95 members of A-BVs in Zanjan province, Iran. To collect data, a questionnaire was designed. Two distinct groups of A-BVs with low (group 1) and high (group 2) perceived (evaluated) levels of effectiveness were revealed. The study showed that there were significant differences between the two groups on important characteristics of A-BVs and their members. The study also found that there were statistically significant relationships between A-BVs' governance structure and capacity, management and organization characteristics and the perceived effectiveness, whereas there were no statistically significant relationships between A-BVs' advisory methods characteristic applied by members and the perceived effectiveness. Logistic regression results also showed that level of application of rules encouraging members' active participation in important decision makings, clear terms of reference to guide contracting procedures, roles, and responsibilities of parties involved, type of people served and geographical area of program coverage, and members' ability to use Information and Communication Technologies (ICTs) were predictors of the perceived (evaluated) effectiveness of A-BVs. The study showed that evaluation of members of effectiveness of A-BVs would not be the same. It is suggested that Iranian public agricultural extension organization, as responsible organization for monitoring and evaluating services conducted by A-BVs, considered these differences between members with different levels of some important variables. 2010 Elsevier Ltd. All rights reserved.

  3. Management Values Survey Results.

    Science.gov (United States)

    Duffy, Barbara; Payne, Ron

    1988-01-01

    Describes results of a survey conducted to compare values of members of the Association for Educational Communications and Technology (AECT) with managers in business and industry. Issues discussed include job satisfaction, opportunities for advancement, attitudes toward management, and salary; a summary of each value system is provided. (LRW)

  4. Teenage pregnancy in adolescents with an incarcerated household member.

    Science.gov (United States)

    Whalen, Mathilde Logan; Loper, Ann Booker

    2014-03-01

    This study examines the association between the incarceration of a household member and adolescent pregnancy, and evaluates whether this association extends beyond that of other variables associated with sexual health. We used data from 12 waves of the National Longitudinal Survey of Youth: Child and Young Adult. After eliminating males and individuals who did not respond to key questions, a sample of 1,229 girls (ages 14-19) was analyzed. Girls who experienced the incarceration of a household member faced more demographic and family environment risk factors than those who did not. Regression analyses demonstrated that the addition of a household incarceration variable afforded superior prediction of teenage pregnancy relative to the prediction based on demographic and family features alone. Programs that are directed toward reducing teen pregnancy will benefit from attention to the home situation of the at-risk girl, particularly the experience of household member incarceration and related family dynamics.

  5. A Study Investigating the Perceived Service Quality Levels of Sport Center Members: A Kano Model Perspective

    Science.gov (United States)

    Yildiz, Kadir; Polat, Ercan; Güzel, Pinar

    2018-01-01

    The purpose of this study is to investigate sport center members' perceived service quality levels with a view to Kano customer expectations and requirements model. To that end, a descriptive approach and a correlational research design featuring survey method is adopted. Research group consists of 680 (300 women, 380 men) sport center members who…

  6. Caregiving for Dementia in Family Members: Caregiving Burden and Prospects for Effective Intervention.

    Science.gov (United States)

    Maiden, Robert J.; And Others

    Caring for a family member with dementia is a major source of stress for the caregiver. To assess the impact of caring for an impaired family member and to evaluate the effectiveness of intervention programs, 34 caregivers of relatives with dementia completed an amended form of the Philadelphia Geriatric Center's Caregiver Survey and two…

  7. Analyzing Greek Members Alcohol Consumption by Gender and the Impact of Alcohol Education Interventions

    Science.gov (United States)

    Brown-Rice, Kathleen A.; Furr, Susan; Jorgensen, Maribeth

    2015-01-01

    Members of the Greek community have been found to engage in riskier alcohol drinking behaviors and have higher alcohol- related negative consequences. A sample of Greek members were surveyed in Spring of 2013 (n = 372). It was found that The Alcohol Use Disorders Identification Test-Consumption (AUDIT-C) scores were significantly higher for male…

  8. Organising methods and member recruitment in Irish Trade Unions

    OpenAIRE

    Turner, Thomas; O'Sullivan, Michelle; D'Art, Daryl

    2011-01-01

    peer-reviewed Purpose This paper explores the recruiting and organising methods used by Irish full-time union officials to recruit new members in the private sector of the economy. Design/methodology/approach The analysis is based on a survey of full-time union officials in eight Irish trade unions. Findings Results indicate that the use of organising techniques by officials had no significant impact on changes in membership numbers but did have a significant and po...

  9. International Focus: Highlighting APPA Members Worldwide

    Science.gov (United States)

    Glazner, Steve, Comp.

    2011-01-01

    While most APPA member institutions are located in the United States and Canada, there are also 45 of member institutions located internationally--from Australia and New Zealand to Southeast Asia to the Middle East to Europe. This article focuses on four of its international members: (1) American University of Kuwait (AUK); (2) American University…

  10. The Members of the Agency (French Edition)

    International Nuclear Information System (INIS)

    2013-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.74) is Swaziland, which deposited its instrument of acceptance of the Statute on 15 February 2013. The Attachment hereto shows the dates on which the present 159 Member States deposited instruments of ratification or acceptance of the Statute with the depositary Government

  11. The Members of the Agency (Spanish Edition)

    International Nuclear Information System (INIS)

    2013-01-01

    The new Member since the last list of Member States was issued (INFCIRC/2/Rev.74) is Swaziland, which deposited its instrument of acceptance of the Statute on 15 February 2013. The Attachment hereto shows the dates on which the present 159 Member States deposited instruments of ratification or acceptance of the Statute with the depositary Government

  12. E-survey with researchers, members of ethics committees and sponsors of clinical research in Brazil: an emerging methodology for scientific research Inquérito pela Internet com pesquisadores clínicos, membros de comitês de ética e patrocinadores de pesquisa clínica no Brasil: uma metodologia emergente para pesquisa científica

    Directory of Open Access Journals (Sweden)

    Sonia Mansoldo Dainesi

    2012-12-01

    Full Text Available INTRODUCTION: The growth of Internet users enables epidemiological studies to be conducted electronically, representing a promising methodology for data collection. METHODS: Members of Ethics Committees, Clinical Researchers and Sponsors were interviewed using questionnaires sent over the Internet. Along with the questionnaire, participants received a message explaining the survey and also the informed consent. Returning the questionnaire meant the consent of the participant was given. No incentive was offered; two reminders were sent. RESULTS: The response rate was 21% (124/599, 20% (58/290 and 45% (24/53 respectively for Ethics Committees, Researchers and Sponsors. The percentage of return before the two reminders was about 62%. Reasons for non-response: participant not found, refusal to participate, lack of experience in clinical research or in the therapeutic field. Characteristics of participants: 45% of Ethics Committee participants, 64% of Researchers and 63% of Sponsors were male; mean age (range, respectively: 47 (28-74, 53 (24-72 and 40 (29-65 years. Among Researchers and Sponsors, all respondents had at least a university degree and, in the Ethics Committees group, only two (1.7% did not have one. Most of the questionnaires in all groups came from the Southeast Region of Brazil, probably reflecting the highest number of clinical trials and research professionals in this region. CONCLUSION: Despite the potential limitations of a survey done through the Internet, this study led to a response rate similar to what has been observed with other models, efficiency in obtaining responses (speed and quality, convenience for respondents and low cost.INTRODUÇÃO: O crescimento de usuários da Internet possibilita que estudos epidemiológicos sejam conduzidos eletronicamente, representando uma promissora metodologia para coleta de dados. MÉTODOS: Membros de Comitês de Ética, pesquisadores clínicos e patrocinadores foram entrevistados com

  13. Members of the LHC Resources Review Boards

    CERN Multimedia

    Maximilien Brice

    2002-01-01

    Photo 01: Members of the LHCRRB visiting Point 2, hosting the ALICE experiment From l. to r. : W. Korda, Head of the VIP Office; P. Rimmer, CERN public relations, J. Seed, Member of the LHCRRB, J.-P. Revol, ALICE CERN Team Leader; J. Bartke, Member of the LHCRRB; F. Suransky, Member of the LHCRRB; J. Schukraft, Spokesperson, ALICE experiment and S. Molinari, VIP Office. Photo 02: Members of the LHC Resources Review Boards visiting the ALICE magnet at Point 2. L. to. r.: O. Dines-Hansen, H. Boggild, S. Irgens-Jensens, H.A. Gustafsson Photo 03: Members of the LHCRRB visiting Point 2, hosting the ALICE experiment From l. t to r.: J.Richter, Member of the LHCRRB; H. Gutbrod, Deputy Spokesperson, ALICE experiment; G. Paic, ALICE experiment; D. Muller, Member of the LHCRRB; P. Brau-Munzinger, ALICE experiment; R. Santo, Member of the LHCRRB, A. Van Rijn, Member of the LHCRRB; J. Engelen, Member of the LHCRRB.

  14. Perceptions of Individual and Family Functioning Among Deployed Female National Guard Members.

    Science.gov (United States)

    Kelly, Patricia J; Cheng, An-Lin; Berkel, LaVerne A; Nilsson, Johanna

    2016-08-01

    Females currently make up 15% of U.S. military service members. Minimal attention has been paid to families of female National Guard members who have been deployed and their subsequent reintegration challenges. This cross-sectional Internet-based survey of female members of four National Guard units compared those who were and were not deployed. Instruments, guided by the variables of the Family Resilience Model, measured individual, family, and deployment-related factors. Bivariate analysis and ordinal logistic regression were done to assess differences between the groups. Of the 239 National Guard members surveyed, deployed women (n = 164) had significantly higher levels of posttraumatic stress disorder (PTSD; p family functioning were higher among deployed when compared with never deployed women. Results indicate community interventions that focus on strengthening coping skills of female Guard members would be useful for this population. © The Author(s) 2016.

  15. Results of the 2013 CASE Europe Salary Survey

    Science.gov (United States)

    Paradise, Andrew

    2013-01-01

    CASE has conducted salary surveys to track trends in the profession and to help members benchmark salaries since 1982. Following CASE's major overhaul of the survey instrument and data collection system, CASE Europe fielded a European version of the salary survey for the second time in October 2012. All individual CASE Europe members at colleges,…

  16. Effects of filling material and laser power on the formation of intermetallic compounds during laser-assisted friction stir butt welding of steel and aluminum alloys

    Science.gov (United States)

    Fei, Xinjiang; Jin, Xiangzhong; Peng, Nanxiang; Ye, Ying; Wu, Sigen; Dai, Houfu

    2016-11-01

    In this paper, two kinds of materials, Ni and Zn, are selected as filling material during laser-assisted friction stir butt welding of Q235 steel and 6061-T6 aluminum alloy, and their influences on the formation of intermetallic compounds on the steel/aluminum interface of the joints were first studied. SEM was used to analyze the profile of the intermetallic compound layer and the fractography of tensile fracture surfaces. In addition, EDS was applied to investigate the types of the intermetallic compounds. The results indicate that a thin iron-abundant intermetallic compound layer forms and ductile fracture mode occurs when Ni is added, but a thick aluminum-abundant intermetallic compound layer generates and brittle fracture mode occurs when Zn is added. So the tensile strength of the welds with Ni as filling material is greater than that with Zn as filling material. Besides, the effect of laser power on the formation of intermetallic compound layer when Ni is added was investigated. The preheated temperature field produced by laser beam in the cross section of workpiece was calculated, and the tensile strength of the joints at different laser powers was tested. Results show that only when suitable laser power is adopted, can suitable preheating temperature of the steel reach, then can thin intermetallic compound layer form and high tensile strength of the joints reach. Either excessive or insufficient laser power will reduce the tensile strength of the joints.

  17. Optimal design for laser beam butt welding process parameter using artificial neural networks and genetic algorithm for super austenitic stainless steel

    Science.gov (United States)

    Sathiya, P.; Panneerselvam, K.; Soundararajan, R.

    2012-09-01

    Laser welding input parameters play a very significant role in determining the quality of a weld joint. The joint quality can be defined in terms of properties such as weld bead geometry, mechanical properties and distortion. Therefore, mechanical properties should be controlled to obtain good welded joints. In this study, the weld bead geometry such as depth of penetration (DP), bead width (BW) and tensile strength (TS) of the laser welded butt joints made of AISI 904L super austenitic stainless steel were investigated. Full factorial design was used to carry out the experimental design. Artificial Neural networks (ANN) program was developed in MatLab software to establish the relationships between the laser welding input parameters like beam power, travel speed and focal position and the three responses DP, BW and TS in three different shielding gases (Argon, Helium and Nitrogen). The established models were used for optimizing the process parameters using Genetic Algorithm (GA). Optimum solutions for the three different gases and their respective responses were obtained. Confirmation experiment has also been conducted to validate the optimized parameters obtained from GA.

  18. Retail yields and palatability evaluations of individual muscles from wet-aged and dry-aged beef ribeyes and top sirloin butts that were merchandised innovatively.

    Science.gov (United States)

    Smith, A M; Harris, K B; Griffin, D B; Miller, R K; Kerth, C R; Savell, J W

    2014-05-01

    Paired ribeyes (n=24) and top sirloin butts (n=24) were dry-aged or wet-aged for 35 days before being merchandised as individual muscles: M. spinalis thoracis, M. longissimus thoracis, M. gluteobiceps, and M. gluteus medius. Wet-aged subprimals had greater saleable yields than dry-aged. Dry-aged M. spinalis thoracis and M. gluteobiceps received lower consumer overall like and flavor ratings than did wet-aged; interior muscles - M. longissimus thoracis and M. gluteus medius - did not differ. Trained panelists found higher musty and putrid flavors for dry-aged muscles closer to exterior surface. These flavors may have contributed to lower consumer overall like and flavor ratings for dry-aged M. spinalis thoracis and M. gluteobiceps. Using innovative styles to cut beef allows for greater merchandising options. However, development of undesirable flavor characteristics may be more pronounced when exterior muscles - M. spinalis thoracis and M. gluteobiceps - are exposed during dry-aging to extreme conditions and are consumed individually. Copyright © 2013 Elsevier Ltd. All rights reserved.

  19. The Effect of Weld Reinforcement and Post-Welding Cooling Cycles on Fatigue Strength of Butt-Welded Joints under Cyclic Tensile Loading.

    Science.gov (United States)

    Araque, Oscar; Arzola, Nelson; Hernández, Edgar

    2018-04-12

    This research deals with the fatigue behavior of butt-welded joints, by considering the geometry and post-welding cooling cycles, as a result of cooling in quiet air and immersed in water. ASTM A-36 HR structural steel was used as the base metal for the shielded metal arc welding (SMAW) process with welding electrode E6013. The welding reinforcement was 1 mm and 3 mm, respectively; axial fatigue tests were carried out to determine the life and behavior in cracks propagation of the tested welded joints, mechanical characterization tests of properties in welded joints such as microhardness, Charpy impact test and metallographic analysis were carried out. The latter were used as input for the analysis by finite elements which influence the initiation and propagation of cracks and the evaluation of stress intensity factors (SIF). The latter led to obtaining the crack propagation rate and the geometric factor. The tested specimens were analyzed, by taking photographs of the cracks at its beginning in order to make a count of the marks at the origin of the crack. From the results obtained and the marks count, the fatigue crack growth rate and the influence of the cooling media on the life of the welded joint are validated, according to the experimental results. It can be concluded that the welded joints with a higher weld reinforcement have a shorter fatigue life. This is due to the stress concentration that occurs in the vicinity of the weld toe.

  20. Prediction of the Vickers Microhardness and Ultimate Tensile Strength of AA5754 H111 Friction Stir Welding Butt Joints Using Artificial Neural Network.

    Science.gov (United States)

    De Filippis, Luigi Alberto Ciro; Serio, Livia Maria; Facchini, Francesco; Mummolo, Giovanni; Ludovico, Antonio Domenico

    2016-11-10

    A simulation model was developed for the monitoring, controlling and optimization of the Friction Stir Welding (FSW) process. This approach, using the FSW technique, allows identifying the correlation between the process parameters (input variable) and the mechanical properties (output responses) of the welded AA5754 H111 aluminum plates. The optimization of technological parameters is a basic requirement for increasing the seam quality, since it promotes a stable and defect-free process. Both the tool rotation and the travel speed, the position of the samples extracted from the weld bead and the thermal data, detected with thermographic techniques for on-line control of the joints, were varied to build the experimental plans. The quality of joints was evaluated through destructive and non-destructive tests (visual tests, macro graphic analysis, tensile tests, indentation Vickers hardness tests and t thermographic controls). The simulation model was based on the adoption of the Artificial Neural Networks (ANNs) characterized by back-propagation learning algorithm with different types of architecture, which were able to predict with good reliability the FSW process parameters for the welding of the AA5754 H111 aluminum plates in Butt-Joint configuration.