WorldWideScience

Sample records for surrogate recovery standards

  1. CTEPP STANDARD OPERATING PROCEDURE FOR PREPARATION OF SURROGATE RECOVERY STANDARD AND INTERNAL STANDARD SOLUTIONS FOR NEUTRAL TARGET ANALYTES (SOP-5.25)

    Science.gov (United States)

    This standard operating procedure describes the method used for preparing internal standard, surrogate recovery standard and calibration standard solutions for neutral analytes used for gas chromatography/mass spectrometry analysis.

  2. CTEPP STANDARD OPERATING PROCEDURE FOR PREPARATION OF SURROGATE RECOVERY STANDARD AND INTERNAL STANDARD SOLUTIONS FOR POLAR TARGET ANALYTES (SOP-5.26)

    Science.gov (United States)

    This SOP describes the method used for preparing surrogate recovery standard and internal standard solutions for the analysis of polar target analytes. It also describes the method for preparing calibration standard solutions for polar analytes used for gas chromatography/mass sp...

  3. Recovery optimization and survival of human norovirus surrogates, feline calicivirus and murine norovirus on carpet.

    Science.gov (United States)

    Buckley, David; Fraser, Angela; Huang, Guohui; Jiang, Xiuping

    2017-09-01

    Carpet been attributed to prolonged and reoccurring outbreaks of human noroviruses (HuNoV), the leading cause of acute gastroenteritis worldwide. Viral recovery from environmental surfaces, such as carpet, remains undeveloped. Our aim was to determine survival of HuNoV surrogates on an understudied environmental surface, carpet. First, we measured the zeta potential and absorption capacity of wool and nylon carpet fibers, then developed a mini-spin column elution method (MSC), and lastly characterized the survival of HuNoV surrogates, feline calicivirus (FCV) and murine norovirus (MNV), over 60 days under 30 and 70% relative humidity (RH) on two types of carpet and one glass surface. Carpet surface charge was negative between relevant pH values (7 - 9). Additionally, wool could absorb ca. 2X more liquid than nylon. Percent recovery efficiency with the MSC ranged from 4.34 to 20.89% and 30.71 to 54.14% for FCV and MNV on carpet fibers, respectively, after desiccation. Overall, elution buffer type did not significantly affect recovery. Infectious FCV or MNV survived between <1 and 15 or 3 and 15 days, respectively. However, MNV survived longer under some conditions and at significantly (P <0.05) higher titers compared to FCV. Albeit, surrogates followed similar survival trends, i.e. both survived longest on wool then nylon and glass while 30% RH provided a more hospitable environment compared to 70% RH. RT-qPCR signals for both surrogates were detectable for the entire study but FCV genomic copies experienced significantly higher reductions (<3.80 log10 copies) on all surfaces compared to MNV (<1.10 log10 copies).IMPORTANCE Human noroviruses (HuNoV) are the leading cause of acute gastroenteritis worldwide. Classical symptoms of illness include vomiting and diarrhea which could lead to severe dehydration and death. HuNoV are transmitted by the fecal-oral or vomitus-oral route via person-to-person, food, water, and/or environmental surfaces. Published laboratory

  4. Percent recovery of low influent concentrations of microorganism surrogates in small sand columns

    Science.gov (United States)

    Stevenson, M. E.; Blaschke, A. P.

    2012-04-01

    In order to develop a dependable method to calculate the setback distance of a drinking water well from a potential point of microbiological contamination, surrogates are used to perform field tests to avoid using pathogenic micro-organisms. One such surrogate used to model the potential travel time of microbial contamination is synthetic microspheres. The goal of this study is to examine the effect of differing influent colloid concentrations on the percent recovery of microbial surrogates after passing through a soil column. Similar studies have been done to investigate blocking of ideal attachment sites using concentrations between 106 and 1010 particles ml-1. These high concentrations were necessary due to the detection limit of the measuring technique used; however, our measuring technique allows us to test input concentrations ranging from 101 to 106 particles ml-1. These low concentrations are more similar to the concentrations of pathogenic microorganisms present in nature. We have tested the enumeration of 0.5 μm microspheres using a solid-phase cytometer and evaluated their transport in small sand columns. Fluorescent microspheres were purchased for this study with carboxylated surfaces. The soil columns consist of Plexiglas tubes, 30 cm long and 7 cm in diameter, both filled with the same coarse sand. Bromide was used as a conservative tracer, to estimate pore-water velocity and dispersivity, and bromide concentrations were analysed using ion chromatography and bromide probes. Numerical modelling was done using CXTFIT and HYDRUS-1D software programs. The 0.5 μm beads were enumerated in different environmental waters using solid-phase cytometry and compared to counts in sterile water in order to confirm the accuracy of the method. The solid-phase cytometer was able to differentiate the 0.5 μm beads from naturally present autofluorescent particles and bacteria, and therefore, is an appropriate method to enumerate this surrogate.

  5. Emerging diet-related surrogate end points for colorectal cancer: UK Food Standards Agency diet and colonic health workshop report

    NARCIS (Netherlands)

    Sanderson, P.; Johnson, I.T.; Mahters, J.C.; Powers, H.J.; Downes, C.S.; McGlynn, A.P.; Dare, R.; Kampman, E.

    2004-01-01

    The UK Food Standards Agency convened a group of expert scientists to review current research investigating emerging diet-related surrogate end points for colorectal cancer (CRC). The workshop aimed to overview current research and establish priorities for future research. The workshop considered th

  6. Performance test results of noninvasive characterization of Resource Conservation and Recovery Act surrogate waste by prompt gamma neutron activation analysis

    Energy Technology Data Exchange (ETDEWEB)

    Gehrke, R.J.; Streier, G.G.

    1997-03-01

    During FY-96, a performance test was carried out with funding from the Mixed Waste Focus Area (MWFA) of the Department of Energy (DOE) to determine the noninvasive elemental assay capabilities of commercial companies for Resource Conservation and Recovery Act (RCRA) metals present in 8-gal drums containing surrogate waste. Commercial companies were required to be experienced in the use of prompt gamma neutron activation analysis (PGNAA) techniques and to have a prototype assay system with which to conduct the test assays. Potential participants were identified through responses to a call for proposals advertised in the Commerce Business Daily and through personal contacts. Six companies were originally identified. Two of these six were willing and able to participate in the performance test, as described in the test plan, with some subsidizing from the DOE MWFA. The tests were conducted with surrogate sludge waste because (1) a large volume of this type of waste awaits final disposition and (2) sludge tends to be somewhat homogeneous. The surrogate concentrations of the above RCRA metals ranged from {approximately} 300 ppm to {approximately} 20,000 ppm. The lower limit was chosen as an estimate of the expected sensitivity of detection required by noninvasive, pretreatment elemental assay systems to be of value for operational and compliance purposes and to still be achievable with state-of-the-art methods of analysis. The upper limit of {approximately} 20,000 ppm was chosen because it is the opinion of the author that assay above this concentration level is within current state-of-the-art methods for most RCRA constituents. This report is organized into three parts: Part 1, Test Plan to Evaluate the Technical Status of Noninvasive Elemental Assay Techniques for Hazardous Waste; Part 2, Participants` Results; and Part 3, Evaluation of and Comments on Participants` Results.

  7. Recovery and Disinfection of Two Human Norovirus Surrogates, Feline Calicivirus and Murine Norovirus, from Hard Nonporous and Soft Porous Surfaces.

    Science.gov (United States)

    Yeargin, Thomas; Fraser, Angela; Huang, Guohui; Jiang, Xiuping

    2015-10-01

    Human norovirus is a leading cause of foodborne disease and can be transmitted through many routes, including environmental exposure to fomites. In this study, both the recovery and inactivation of two human norovirus surrogates, feline calicivirus (FCV) and murine norovirus (MNV), on hard nonporous surfaces (glass) and soft porous surfaces (polyester and cotton) were evaluated by both plaque assay and reverse transcription quantitative PCR method. Two disinfectants, sodium hypochlorite (8.25%) and accelerated hydrogen peroxide (AHP, at 4.25%) were evaluated for disinfection efficacy. Five coupons per surface type were used to evaluate the recovery of FCV and MNV by sonication and stomaching and the disinfection of each surface type by using 5 ml of disinfectant for a contact time of 5 min. FCV at an initial titer of ca. 7 log PFU/ml was recovered from glass, cotton, and polyester at 6.2, 5.4, and 3.8 log PFU/ml, respectively, compared with 5.5, 5.2, and 4.1 log PFU/ml, respectively, for MNV with an initial titer of ca. 6 log PFU/ml. The use of sodium hypochlorite (5,000 ppm) was able to inactivate both FCV and MNV (3.1 to 5.5 log PFU/ml) below the limit of detection on all three surface types. AHP (2,656 ppm) inactivated FCV (3.1 to 5.5 log PFU/ml) below the limit of detection for all three surface types but achieved minimal inactivation of MNV (0.17 to 1.37 log PFU/ml). Reduction of viral RNA by sodium hypochlorite corresponded to 2.72 to 4.06 log reduction for FCV and 2.07 to 3.04 log reduction for MNV on all three surface types. Reduction of viral RNA by AHP corresponded to 1.89 to 3.4 log reduction for FCV and 0.54 to 0.85 log reduction for MNV. Our results clearly indicate that both virus and surface types significantly influence recovery efficiency and disinfection efficacy. Based on the performance of our proposed testing method, an improvement in virus recovery will be needed to effectively validate virus disinfection of soft porous surfaces.

  8. Individual variability in heart rate recovery after standardized submaximal exercise

    NARCIS (Netherlands)

    M.S. Brink; C. Visscher; Koen A.P.M. Lemmink; H.T.D. van der Does

    2012-01-01

    To optimize performance, coaches and athletes are always looking for the right balance between training load and recovery. Therefore, closely monitoring of athletes is important. Heart rate recovery (HRR) after standardized sub maximal exercise has been proposed as a useful variable to monitor

  9. Individual variability in heart rate recovery after standardized submaximal exercise

    NARCIS (Netherlands)

    Does, H.T.D. van der; Brink, M.S.; Visscher, C.; Lemmink, K.A.P.M.

    2012-01-01

    To optimize performance, coaches and athletes are always looking for the right balance between training load and recovery. Therefore, closely monitoring of athletes is important. Heart rate recovery (HRR) after standardized sub maximal exercise has been proposed as a useful variable to monitor (Lamb

  10. Recovery Efficiency, False Negative Rate, and Limit of Detection Performance of a Validated Macrofoam-Swab Sampling Method with Low Surface Concentrations of Two Bacillus anthracis Surrogates

    Energy Technology Data Exchange (ETDEWEB)

    Piepel, Gregory F. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hutchison, Janine R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Deatherage Kaiser, Brooke L [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Amidan, Brett G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sydor, Michael A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Barrett, Christopher A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-03-31

    The performance of a macrofoam-swab sampling method was evaluated using Bacillus anthracis Sterne (BAS) and Bacillus atrophaeus Nakamura (BG) spores applied at nine low target amounts (2-500 spores) to positive-control plates and test coupons (2 in. × 2 in.) of four surface materials (glass, stainless steel, vinyl tile, and plastic). Test results from cultured samples were used to evaluate the effects of surrogate, surface concentration, and surface material on recovery efficiency (RE), false negative rate (FNR), and limit of detection. For RE, surrogate and surface material had statistically significant effects, but concentration did not. Mean REs were the lowest for vinyl tile (50.8% with BAS, 40.2% with BG) and the highest for glass (92.8% with BAS, 71.4% with BG). FNR values ranged from 0 to 0.833 for BAS and 0 to 0.806 for BG, with values increasing as concentration decreased in the range tested (0.078 to 19.375 CFU/cm2, where CFU denotes ‘colony forming units’). Surface material also had a statistically significant effect. A FNR-concentration curve was fit for each combination of surrogate and surface material. For both surrogates, the FNR curves tended to be the lowest for glass and highest for vinyl title. The FNR curves for BG tended to be higher than for BAS at lower concentrations, especially for glass. Results using a modified Rapid Viability-Polymerase Chain Reaction (mRV-PCR) analysis method were also obtained. The mRV-PCR results and comparisons to the culture results will be discussed in a subsequent report.

  11. Experimental Design for a Macrofoam Swab Study Relating the Recovery Efficiency and False Negative Rate to Low Concentrations of Two Bacillus anthracis Surrogates on Four Surface Materials

    Energy Technology Data Exchange (ETDEWEB)

    Piepel, Gregory F.; Hutchison, Janine R.

    2014-04-16

    This report describes the experimental design for a laboratory study to quantify the recovery efficiencies and false negative rates of a validated, macrofoam swab sampling method for low concentrations of Bacillus anthracis Sterne (BAS) and Bacillus atrophaeus (BG) spores on four surface materials (stainless steel, glass, vinyl tile, plastic light cover panel). Two analytical methods (plating/counting and polymerase chain reaction) will be used. Only one previous study has investigated false negative as a function of affecting test factors. The surrogates BAS and BG have not been tested together in the same study previously. Hence, this study will provide for completing gaps in the available information on the performance of macrofoam swab sampling at low concentrations.

  12. Experimental Design for a Macrofoam-Swab Study Relating the Recovery Efficiency and False Negative Rate to Low Concentrations of Two Bacillus anthracis Surrogates on Four Surface Materials

    Energy Technology Data Exchange (ETDEWEB)

    Piepel, Gregory F. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hutchison, Janine R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2014-12-05

    This report describes the experimental design for a laboratory study to quantify the recovery efficiencies and false negative rates of a validated, macrofoam-swab sampling method for low concentrations of Bacillus anthracis Sterne (BAS) and Bacillus atrophaeus (BG) spores on four surface materials (stainless steel, glass, vinyl tile, plastic light cover panel). Two analytical methods (culture and polymerase chain reaction) will be used. Only one previous study has investigated how the false negative rate depends on test factors. The surrogates BAS and BG have not been tested together in the same study previously. Hence, this study will provide for completing gaps in the available information on the performance of macrofoam-swab sampling at low concentrations.

  13. PLAN-TA9-2443(U), Rev. B Remediated Nitrate Salt (RNS) Surrogate Formulation and Testing Standard Procedure

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Geoffrey Wayne [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-03-16

    This document identifies scope and some general procedural steps for performing Remediated Nitrate Salt (RNS) Surrogate Formulation and Testing. This Test Plan describes the requirements, responsibilities, and process for preparing and testing a range of chemical surrogates intended to mimic the energetic response of waste created during processing of legacy nitrate salts. The surrogates developed are expected to bound1 the thermal and mechanical sensitivity of such waste, allowing for the development of process parameters required to minimize the risk to worker and public when processing this waste. Such parameters will be based on the worst-case kinetic parameters as derived from APTAC measurements as well as the development of controls to mitigate sensitivities that may exist due to friction, impact, and spark. This Test Plan will define the scope and technical approach for activities that implement Quality Assurance requirements relevant to formulation and testing.

  14. Developing a Robust Surrogate Model of Chemical Flooding Based on the Artificial Neural Network for Enhanced Oil Recovery Implications

    Directory of Open Access Journals (Sweden)

    Mohammad Ali Ahmadi

    2015-01-01

    Full Text Available Application of chemical flooding in petroleum reservoirs turns into hot topic of the recent researches. Development strategies of the aforementioned technique are more robust and precise when we consider both economical points of view (net present value, NPV and technical points of view (recovery factor, RF. In current study many attempts have been made to propose predictive model for estimation of efficiency of chemical flooding in oil reservoirs. To gain this end, a couple of swarm intelligence and artificial neural network (ANN is employed. Also, lucrative and high precise chemical flooding data banks reported in previous attentions are utilized to test and validate proposed intelligent model. According to the mean square error (MSE, correlation coefficient, and average absolute relative deviation, the suggested swarm approach has acceptable reliability, integrity and robustness. Thus, the proposed intelligent model can be considered as an alternative model to predict the efficiency of chemical flooding in oil reservoir when the required experimental data are not available or accessible.

  15. Standards and Guidelines of the Reading Recovery [TM] Council of North America. Third Edition: Fall 1998.

    Science.gov (United States)

    Reading Recovery Council of North America, Columbus, OH.

    This booklet outlines the Reading Recovery Council of North America's (RRCNA) standards and guidelines for those who are responsible for the establishment and maintenance of effective Reading Recovery and/or "Descubriendo La Lectura" sites. The standards are deemed essential for assuring quality services to children and effective…

  16. Discussing the Determination Standard of Recovery Efficiency of Nitrogen Fertilizer

    Directory of Open Access Journals (Sweden)

    TIAN Chang-yu

    2016-07-01

    Full Text Available Recovery efficiency of nitrogen fertilizer(REN is an important index for the increasing crop yield and reducing environmental benefits of nitrogen fertilizer. But the determination and calculation methods of REN have some problems to study. They are lower rate and higher variability of the rate than it should be. The long-term nitrogen fertilizer location test had been taken since 2007 to analyze the nitrogen uptake rate of wheat year after year and the REN rate was calculated annually. A reasonable measurement specification of REN determination method was put forward. The REN measurement specification was:(1The wheat nitrogen uptake of CK kept relatively stable after a few years; (2The wheat nitrogen uptake ratio of fetilized treatment retained stable; (3REN must be used the average of 3 years of steady period value. With this measurement specification of REN determination method, REN rate was in the range of 69.2%~76.2%(Wheat when applied nitrogen fertilizer in range of 120~180 kg N·hm-2. REN determination method should follow this specification. In this case the correct and reasonable REN parameter can be measured. The reasonable REN can be applied in scientific research and production.

  17. Enhanced recovery after elective colorectal surgery: now the standard of care.

    LENUS (Irish Health Repository)

    Andrews, E J

    2011-09-01

    Enhanced recovery programmes have been studied in randomised trials with evidence of quicker recovery of gut function, reduced morbidity, mortality and hospital stay and improved physiological and nutritional outcomes. They aim to reduce the physiological and psychological stress of surgery and consequently the uncontrolled stress response. The key elements, reduced pre-operative fasting, intravenous fluid restriction and early feeding after surgery, are in conflict with traditional management plans but are supported by strong clinical evidence. Given the strength of the current data enhanced recovery should now be the standard of care.

  18. Development of standard test methods for evaluating defibrillation recovery characteristics of disposable ECG electrodes.

    Science.gov (United States)

    Schoenberg, A A; Booth, H E; Lyon, P C

    1979-01-01

    A clinically relevant test for the measurement of defibrillation overload recovery of prefilled disposable ECG electrodes was developed and is proposed for use in an ECG electrode standard under development by AAMI. Defibrillation overload voltages and currents, as well as electrode polarization recovery voltages, were first measured in animal tests on 12 types of electrodes to allow correlation with various bench tests using a capacitor discharge at 10, 200, or 1000 V. Current overloads absorbed by the electrodes under worst conditions in animal tests were in the range of 2 percent of the defibrillation current flowing through the chest. These overloads were absorbed by most Ag-AgCl electrodes without excessive polarization. However, stainless steel, brass, and tin electrodes tended to polarize to levels that would saturate many ECG monitors. A standard bench test using a 200-V 10-muF capacitor was recommended for inclusion in the AAMI standard to determine whether electrodes are acceptable for use during defibrillation.

  19. Standardized Procedure for the Simultaneous Determination of the Matrix Effect, Recovery, Process Efficiency, and Internal Standard Association.

    Science.gov (United States)

    Bienvenu, Jean-François; Provencher, Gilles; Bélanger, Patrick; Bérubé, René; Dumas, Pierre; Gagné, Sébastien; Gaudreau, Éric; Fleury, Normand

    2017-07-18

    The matrix effects (MEs) on the quantification of an analyte can be significant and should not be neglected during development and validation of an analytical method. According to this premise, we developed a standardized procedure based on a set of six tests performed on six different sample matrices to detect and characterize the effects of the matrix for single and multiple analytes methods. The link between the matrix effect, recovery, process efficiency, accuracy, precision, and calibration curve was underscored by calculations performed with peak areas, ratios of standard/internal standard peak area, and concentrations. The terms instrumental ME and global ME were introduced, and the term recovery was subdivided for clarity. The test accounts for the presence of ubiquitous and endogenous analytes through background subtraction. The results showed the necessity for using samples with an original concentration in the same range and that the concentration selected for the addition had a definite impact on the results. The use of six-sample matrices provided a standard deviation on the results, and this information could be inserted in a method performance result to show precision. The tool also allows for testing of different analytes/internal standard combinations, which helps with the selection of the association with minimum MEs. A UPLC-MS/MS method for the quantification of several phthalate metabolites in urine was developed and validated with this test. This methodology responds to a scientific need for homogeneity, clarity, and understanding of the results and facilitates the decision-making process while lowering the required costs and time.

  20. I don't want to be the one saying 'we should just let him die': intrapersonal tensions experienced by surrogate decision makers in the ICU.

    Science.gov (United States)

    Schenker, Yael; Crowley-Matoka, Megan; Dohan, Daniel; Tiver, Greer A; Arnold, Robert M; White, Douglas B

    2012-12-01

    Although numerous studies have addressed external factors associated with difficulty in surrogate decision making, intrapersonal sources of tension are an important element of decision making that have received little attention. To characterize key intrapersonal tensions experienced by surrogate decision makers in the intensive care unit (ICU), and explore associated coping strategies. Qualitative interview study. Thirty surrogates from five ICUs at two hospitals in Pittsburgh, Pennsylvania, who were actively involved in making life-sustaining treatment decisions for a critically ill loved one. We conducted in-depth, semi-structured interviews with surrogates, focused on intrapersonal tensions, role challenges, and coping strategies. We analyzed transcripts using constant comparative methods. Surrogates experience significant emotional conflict between the desire to act in accordance with their loved one's values and 1) not wanting to feel responsible for a loved one's death, 2) a desire to pursue any chance of recovery, and 3) the need to preserve family well-being. Associated coping strategies included 1) recalling previous discussions with a loved one, 2) sharing decisions with family members, 3) delaying or deferring decision making, 4) spiritual/religious practices, and 5) story-telling. Surrogates' struggle to reconcile personal and family emotional needs with their loved ones' wishes, and utilize common coping strategies to combat intrapersonal tensions. These data suggest reasons surrogates may struggle to follow a strict substituted judgment standard. They also suggest ways clinicians may improve decision making, including attending to surrogates' emotions, facilitating family decision making, and eliciting potential emotional conflicts and spiritual needs.

  1. Recovery in mechanical muscle strength following resurfacing vs standard total hip arthroplasty - a randomised clinical trial

    DEFF Research Database (Denmark)

    Jensen, Carsten; Aagaard, Per; Overgaard, S

    2011-01-01

    OBJECTIVES: To evaluate the effect of resurfacing vs standard total hip replacement on post-surgery hip and knee muscle strength recovery in a prospective randomised controlled trial at the Department of Orthopaedics, University Hospital, Odense, Denmark. METHODS: Forty-three patients were......-29%) with the affected side being weakest (P ≤ 0.05) and hip flexors being most affected. Asymmetry was present in half of the muscle groups at 26 wks (P ≤ 0.05), and remained present for the hip flexors and hip adductors at 52 wks (P ≤ 0.05). CONCLUSIONS: R-THA patients showed an attenuated and delayed recovery...... in maximal lower limb muscle strength (in 2/6 muscle groups) compared to S-THA. Notably, the attenuated strength recovery following R-THA was most markedly manifested in the late phase (1 yr) of post-surgical recovery, and appeared to be due to the detachment of the lower half of the gluteus maximus muscle...

  2. Experimental Design for a Sponge-Wipe Study to Relate the Recovery Efficiency and False Negative Rate to the Concentration of a Bacillus anthracis Surrogate for Six Surface Materials

    Energy Technology Data Exchange (ETDEWEB)

    Piepel, Gregory F. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Amidan, Brett G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Krauter, Paula [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Einfeld, Wayne [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2010-12-16

    Two concerns were raised by the Government Accountability Office following the 2001 building contaminations via letters containing Bacillus anthracis (BA). These included the: 1) lack of validated sampling methods, and 2) need to use statistical sampling to quantify the confidence of no contamination when all samples have negative results. Critical to addressing these concerns is quantifying the probability of correct detection (PCD) (or equivalently the false negative rate FNR = 1 - PCD). The PCD/FNR may depend on the 1) method of contaminant deposition, 2) surface concentration of the contaminant, 3) surface material being sampled, 4) sample collection method, 5) sample storage/transportation conditions, 6) sample processing method, and 7) sample analytical method. A review of the literature found 17 laboratory studies that focused on swab, wipe, or vacuum samples collected from a variety of surface materials contaminated by BA or a surrogate, and used culture methods to determine the surface contaminant concentration. These studies quantified performance of the sampling and analysis methods in terms of recovery efficiency (RE) and not PCD/FNR (which left a major gap in available information). Quantifying the PCD/FNR under a variety of conditions is a key aspect of validating sample and analysis methods, and also for calculating the confidence in characterization or clearance decisions based on a statistical sampling plan. A laboratory study was planned to partially fill the gap in PCD/FNR results. This report documents the experimental design developed by Pacific Northwest National Laboratory and Sandia National Laboratories (SNL) for a sponge-wipe method. The study will investigate the effects on key response variables from six surface materials contaminated with eight surface concentrations of a BA surrogate (Bacillus atrophaeus). The key response variables include measures of the contamination on test coupons of surface materials tested, contamination

  3. Experimental Design for a Sponge-Wipe Study to Relate the Recovery Efficiency and False Negative Rate to the Concentration of a Bacillus anthracis Surrogate for Six Surface Materials

    Energy Technology Data Exchange (ETDEWEB)

    Piepel, Gregory F.; Amidan, Brett G.; Krauter, Paula; Einfeld, Wayne

    2011-05-01

    Two concerns were raised by the Government Accountability Office following the 2001 building contaminations via letters containing Bacillus anthracis (BA). These included the: 1) lack of validated sampling methods, and 2) need to use statistical sampling to quantify the confidence of no contamination when all samples have negative results. Critical to addressing these concerns is quantifying the false negative rate (FNR). The FNR may depend on the 1) method of contaminant deposition, 2) surface concentration of the contaminant, 3) surface material being sampled, 4) sample collection method, 5) sample storage/transportation conditions, 6) sample processing method, and 7) sample analytical method. A review of the literature found 17 laboratory studies that focused on swab, wipe, or vacuum samples collected from a variety of surface materials contaminated by BA or a surrogate, and used culture methods to determine the surface contaminant concentration. These studies quantified performance of the sampling and analysis methods in terms of recovery efficiency (RE) and not FNR (which left a major gap in available information). Quantifying the FNR under a variety of conditions is a key aspect of validating sample and analysis methods, and also for calculating the confidence in characterization or clearance decisions based on a statistical sampling plan. A laboratory study was planned to partially fill the gap in FNR results. This report documents the experimental design developed by Pacific Northwest National Laboratory and Sandia National Laboratories (SNL) for a sponge-wipe method. The testing was performed by SNL and is now completed. The study investigated the effects on key response variables from six surface materials contaminated with eight surface concentrations of a BA surrogate (Bacillus atrophaeus). The key response variables include measures of the contamination on test coupons of surface materials tested, contamination recovered from coupons by sponge

  4. 'Tissue surrogates' as a model for archival formalin-fixed paraffin-embedded tissues.

    Science.gov (United States)

    Fowler, Carol B; Cunningham, Robert E; O'Leary, Timothy J; Mason, Jeffrey T

    2007-08-01

    High-throughput proteomic studies of archival formalin-fixed paraffin-embedded (FFPE) tissues have the potential to be a powerful tool for examining the clinical course of disease. However, advances in FFPE tissue-based proteomics have been hampered by inefficient methods to extract proteins from archival tissue and by an incomplete knowledge of formaldehyde-induced modifications in proteins. To help address these problems, we have developed a procedure for the formation of 'tissue surrogates' to model FFPE tissues. Cytoplasmic proteins, such as lysozyme or ribonuclease A, at concentrations approaching the protein content in whole cells, are fixed with 10% formalin to form gelatin-like plugs. These plugs have sufficient physical integrity to be processed through graded alcohols, xylene, and embedded in paraffin according to standard histological procedures. In this study, we used tissue surrogates formed from one or two proteins to evaluate extraction protocols for their ability to quantitatively extract proteins from the surrogates. Optimal protein extraction was obtained using a combination of heat, a detergent, and a protein denaturant. The addition of a reducing agent did not improve protein recovery; however, recovery varied significantly with pH. Protein extraction of >80% was observed for pH 4 buffers containing 2% (w/v) sodium dodecyl sulfate (SDS) when heated at 100 degrees C for 20 min, followed by incubation at 60 degrees C for 2 h. SDS-polyacrylamide gel electrophoresis of the extracted proteins revealed that the surrogate extracts contained a mixture of monomeric and multimeric proteins, regardless of the extraction protocol employed. Additionally, protein extracts from surrogates containing carbonic anhydrase:lysozyme (1:2 mol/mol) had disproportionate percentages of lysozyme, indicating that selective protein extraction in complex multiprotein systems may be a concern in proteomic studies of FFPE tissues.

  5. Birds as biodiversity surrogates

    DEFF Research Database (Denmark)

    Larsen, Frank Wugt; Bladt, Jesper Stentoft; Balmford, Andrew

    2012-01-01

    1. Most biodiversity is still unknown, and therefore, priority areas for conservation typically are identified based on the presence of surrogates, or indicator groups. Birds are commonly used as surrogates of biodiversity owing to the wide availability of relevant data and their broad popular...... appeal. However, some studies have found birds to perform relatively poorly as indicators. We therefore ask how the effectiveness of this approach can be improved by supplementing data on birds with information on other taxa. 2. Here, we explore two strategies using (i) species data for other taxa...... areas identified on the basis of birds alone performed well in representing overall species diversity where birds were relatively speciose compared to the other taxa in the data sets. Adding species data for one taxon increased surrogate effectiveness better than adding genus- and family-level data...

  6. Plutonium radiation surrogate

    Science.gov (United States)

    Frank, Michael I [Dublin, CA

    2010-02-02

    A self-contained source of gamma-ray and neutron radiation suitable for use as a radiation surrogate for weapons-grade plutonium is described. The source generates a radiation spectrum similar to that of weapons-grade plutonium at 5% energy resolution between 59 and 2614 keV, but contains no special nuclear material and emits little .alpha.-particle radiation. The weapons-grade plutonium radiation surrogate also emits neutrons having fluxes commensurate with the gamma-radiation intensities employed.

  7. Standardized Discharge Information After Short-Stay Hysterectomy and Relationships With Self-Care Confidence, Perceived Recovery, and Satisfaction.

    Science.gov (United States)

    Lynch, Kate M; LeFort, Sandra M

    2016-01-01

    We report on the development and investigation of standardized, nurse-delivered discharge information to women after same-day hysterectomy, including the relationships among discharge information, self-care confidence, perceived recovery, and satisfaction. Fifty-one women reported high levels of self-care confidence and various levels of perceived recovery 48 to 72 hours after surgery. They were satisfied to highly satisfied with their experiences and with the discharge information provided. The important role of standardized patient discharge information is highlighted.

  8. Developments in Surrogating Methods

    Directory of Open Access Journals (Sweden)

    Hans van Dormolen

    2005-11-01

    Full Text Available In this paper, I would like to talk about the developments in surrogating methods for preservation. My main focus will be on the technical aspects of preservation surrogates. This means that I will tell you something about my job as Quality Manager Microfilming for the Netherlands’ national preservation program, Metamorfoze, which is coordinated by the National Library. I am responsible for the quality of the preservation microfilms, which are produced for Metamorfoze. Firstly, I will elaborate on developments in preservation methods in relation to the following subjects: · Preservation microfilms · Scanning of preservation microfilms · Preservation scanning · Computer Output Microfilm. In the closing paragraphs of this paper, I would like to tell you something about the methylene blue test. This is an important test for long-term storage of preservation microfilms. Also, I will give you a brief report on the Cellulose Acetate Microfilm Conference that was held in the British Library in London, May 2005.

  9. Laparoscopic colorectal surgery in learning curve: Role of implementation of a standardized technique and recovery protocol. A cohort study

    Directory of Open Access Journals (Sweden)

    Gaetano Luglio

    2015-06-01

    Conclusion: Proper laparoscopic colorectal surgery is safe and leads to excellent results in terms of recovery and short term outcomes, even in a learning curve setting. Key factors for better outcomes and shortening the learning curve seem to be the adoption of a standardized technique and training model along with the strict supervision of an expert colorectal surgeon.

  10. A Statistical Estimation Approach for Quantitative Concentrations of Compounds Lacking Authentic Standards/Surrogates Based on Linear Correlations between Directly Measured Detector Responses and Carbon Number of Different Functional Groups

    Directory of Open Access Journals (Sweden)

    Yong-Hyun Kim

    2013-01-01

    Full Text Available A statistical approach was investigated to estimate the concentration of compounds lacking authentic standards/surrogates (CLASS. As a means to assess the reliability of this approach, the response factor (RF of CLASS is derived by predictive equations based on a linear regression (LR analysis between the actual RF (by external calibration of 18 reference volatile organic compounds (VOCs consisting of six original functional groups and their physicochemical parameters ((1 carbon number (CN, (2 molecular weight (MW, and (3 boiling point (BP. If the experimental bias is estimated in terms of percent difference (PD between the actual and projected RF, the least bias for 18 VOCs is found from CN (17.9±19.0%. In contrast, the PD values against MW and BP are 40.6% and 81.5%, respectively. Predictive equations were hence derived via an LR analysis between the actual RF and CN for 29 groups: (1 one group consisting of all 18 reference VOCs, (2 three out of six original functional groups, and (3 25 groups formed randomly from the six functional groups. The applicability of this method was tested by fitting these 29 equations into each of the six original functional groups. According to this approach, the mean PD for 18 compounds dropped as low as 5.60±5.63%. This approach can thus be used as a practical tool to assess the quantitative data for CLASS.

  11. Surrogate decision making and intellectual virtue.

    Science.gov (United States)

    Bock, Gregory L

    2014-01-01

    Patients can be harmed by a religiously motivated surrogate decision maker whose decisions are contrary to the standard of care; therefore, surrogate decision making should be held to a high standard. Stewart Eskew and Christopher Meyers proposed a two-part rule for deciding which religiously based decisions to honor: (1) a secular reason condition and (2) a rationality condition. The second condition is based on a coherence theory of rationality, which they claim is accessible, generous, and culturally sensitive. In this article, I will propose strengthening the rationality condition by grounding it in a theory of intellectual virtue, which is both rigorous and culturally sensitive. Copyright 2014 The Journal of Clinical Ethics. All rights reserved.

  12. Surrogate formulations for thermal treatment of low-level mixed waste. Part 1: Radiological surrogates

    Energy Technology Data Exchange (ETDEWEB)

    Stockdale, J.A.D.; Bostick, W.D.; Hoffmann, D.P. [Martin Marietta Energy Systems, Inc., Oak Ridge, TN (United States); Lee, H.T. [Oak Ridge Associated Universities, TN (United States)

    1994-01-01

    The evaluation and comparison of proposed thermal treatment systems for mixed wastes can be expedited by tests in which the radioactive components of the wastes are replaced by surrogate materials chosen to mimic, as far as is possible, the chemical and physical properties of the radioactive materials of concern. In this work, sponsored by the Mixed Waste Integrated Project of the US Department of Energy, the authors have examined reported experience with such surrogates and suggest a simplified standard list of materials for use in tests of thermal treatment systems. The chief radioactive nuclides of concern in the treatment of mixed wastes are {sup 239}Pu, {sup 238}U, {sup 235}U, {sup 137}Cs, {sup 103}Ru, {sup 99}Tc, and {sup 90}Sr. These nuclides are largely by-products of uranium enrichment, reactor fuel reprocessing, and weapons program activities. Cs, Ru, and Sr all have stable isotopes that can be used as perfect surrogates for the radioactive forms. Technetium exists only in radioactive form, as do plutonium and uranium. If one wishes to preclude radioactive contamination of the thermal treatment system under trial burn, surrogate elements must be chosen for these three. For technetium, the authors suggest the use of natural ruthenium, and for both plutonium and uranium, they recommend cerium. The seven radionuclides listed can therefore be simulated by a surrogate package containing stable isotopes of ruthenium, strontium, cesium, and cerium.

  13. Surrogate Modeling for Geometry Optimization

    DEFF Research Database (Denmark)

    Rojas Larrazabal, Marielba de la Caridad; Abraham, Yonas; Holzwarth, Natalie;

    2009-01-01

    A new approach for optimizing the nuclear geometry of an atomic system is described. Instead of the original expensive objective function (energy functional), a small number of simpler surrogates is used.......A new approach for optimizing the nuclear geometry of an atomic system is described. Instead of the original expensive objective function (energy functional), a small number of simpler surrogates is used....

  14. Surrogate Endpoints in Suicide Research

    Science.gov (United States)

    Wortzel, Hal S.; Gutierrez, Peter M.; Homaifar, Beeta Y.; Breshears, Ryan E.; Harwood, Jeri E.

    2010-01-01

    Surrogate endpoints frequently substitute for rare outcomes in research. The ability to learn about completed suicides by investigating more readily available and proximate outcomes, such as suicide attempts, has obvious appeal. However, concerns with surrogates from the statistical science perspective exist, and mounting evidence from…

  15. Factors affecting recovery efficiency in isolation of Cryptosporidium oocysts and Giardia cysts from vegetables for standard method development.

    Science.gov (United States)

    Robertson, L J; Gjerde, B

    2001-11-01

    While recently published techniques for recovering parasites from fruits and vegetables demonstrate a marked increase in efficiency and utility, there is still scope for further improvement in developing a standard method, particularly with difficult, but important, sample matrices such as bean sprouts. Herein, a number of parameters used in published techniques are investigated more closely. While sample size reduction may improve recovery efficiency because of a range of factors, it is important to keep the sample large enough for detection of low-level contamination. Age of sample is also important, and samples should be as fresh as possible. Elution procedures may contribute to losses of Giardia and should be more thoroughly investigated. Improved immunomagnetic separation techniques currently coming onto the market also have the potential to increase recovery efficiency substantially, even with difficult samples such as aged bean sprouts. However, merely increasing magnetic strength of the capturing magnet does not affect recovery efficiency, which must be reliant on a superior bead system, buffering system, or both.

  16. Simulation of the pressure recovery time in a CLIC standard module

    CERN Document Server

    Costa-Pinto, P

    2008-01-01

    Vacuum pressure inside the CLIC accelerating structures (AS) is crucial for both beam and RF stability. Gas molecules released during RF breakdown must be evacuated from the cells of the AS before the arrival of the next train of particles. Due to its complex geometry, accurate analytical calculations are not viable. In this paper we introduce a calculation method based on the combination of analytical vacuum equations with Monte Carlo test particle simulations, implemented in a PSpice environment via the vacuum-electrical network analogy. Pressure recovery times are calculated for the main gas species released during a breakdown. The number and type of molecules used for the calculation is the result of measurements performed in the DC spark test system.

  17. Surrogate Mobility and Orientation Affect the Early Neurobehavioral Development of Infant Rhesus Macaques (Macaca mulatta)

    OpenAIRE

    Amanda M Dettmer; Ruggerio, Angela M.; Novak, Melinda A.; Meyer, Jerrold S.; Suomi, Stephen J.

    2008-01-01

    A biological mother’s movement appears necessary for optimal development in infant monkeys. However, nursery-reared monkeys are typically provided with inanimate surrogate mothers that move very little. The purpose of this study was to evaluate the effects of a novel, highly mobile surrogate mother on motor development, exploration, and reactions to novelty. Six infant rhesus macaques (Macaca mulatta) were reared on mobile hanging surrogates (MS) and compared to six infants reared on standard...

  18. Recovery Act: Water Heater ZigBee Open Standard Wireless Controller

    Energy Technology Data Exchange (ETDEWEB)

    Butler, William P. [Emerson Electric Co., St. Louis, MO (United States); Buescher, Tom [Emerson Electric Co., St. Louis, MO (United States)

    2014-04-30

    The objective of Emerson's Water Heater ZigBee Open Standard Wireless Controller is to support the DOE's AARA priority for Clean, Secure Energy by designing a water heater control that levels out residential and small business peak electricity demand through thermal energy storage in the water heater tank.

  19. 40 CFR 82.158 - Standards for recycling and recovery equipment.

    Science.gov (United States)

    2010-07-01

    ... conditions of the SAE Standard, SAE J1990 (appendix A to 40 CFR part 82, subpart B). (h) Manufacturers and... 20 PPM. Noncondensable Gas (by vol.) N/A 2.0% 2.0%. High Boiling Residues (by vol.) 1.0% 0.02%...

  20. Effectiveness of biological surrogates for predicting patterns of marine biodiversity: a global meta-analysis.

    Directory of Open Access Journals (Sweden)

    Camille Mellin

    Full Text Available The use of biological surrogates as proxies for biodiversity patterns is gaining popularity, particularly in marine systems where field surveys can be expensive and species richness high. Yet, uncertainty regarding their applicability remains because of inconsistency of definitions, a lack of standard methods for estimating effectiveness, and variable spatial scales considered. We present a Bayesian meta-analysis of the effectiveness of biological surrogates in marine ecosystems. Surrogate effectiveness was defined both as the proportion of surrogacy tests where predictions based on surrogates were better than random (i.e., low probability of making a Type I error; P and as the predictability of targets using surrogates (R(2. A total of 264 published surrogacy tests combined with prior probabilities elicited from eight international experts demonstrated that the habitat, spatial scale, type of surrogate and statistical method used all influenced surrogate effectiveness, at least according to either P or R(2. The type of surrogate used (higher-taxa, cross-taxa or subset taxa was the best predictor of P, with the higher-taxa surrogates outperforming all others. The marine habitat was the best predictor of R(2, with particularly low predictability in tropical reefs. Surrogate effectiveness was greatest for higher-taxa surrogates at a <10-km spatial scale, in low-complexity marine habitats such as soft bottoms, and using multivariate-based methods. Comparisons with terrestrial studies in terms of the methods used to study surrogates revealed that marine applications still ignore some problems with several widely used statistical approaches to surrogacy. Our study provides a benchmark for the reliable use of biological surrogates in marine ecosystems, and highlights directions for future development of biological surrogates in predicting biodiversity.

  1. Performance of a rate responsive accelerometer-based pacemaker with autocalibration during standardized exercise and recovery.

    Science.gov (United States)

    Garrigue, Stephane; Gentilini, Claudio; Hofgartner, Franz; Mouton, Elisabeth; Rousseau, Anne; Clementy, Jacques

    2002-06-01

    The rate responsiveness of a single chamber, accelerometer-based pacemaker with an autocalibration function (Opus G VVIR pacemaker, ELA Medical) was studied with a daily life protocol developed to automatically optimize the programming of accelerometer-based sensors. This new sensor was compared with two other body activity sensors that were manually optimized patient by patient. Forty-three pacemaker recipients (mean age 71 +/- 11 years), paced > 95% of the time, underwent a daily life protocol consisting of rapid walking for 6 minutes (W), climbing upstairs for 1.5 minutes (U), and downstairs for 1.5 minutes (D), alternated by recovery phases. The results were compared with performances measured in a control population of healthy subjects and in two paced patient populations (one equipped with a Dash Intermedics VVIR pacemaker and the other equipped with a Sensolog III Pacesetter/St. Jude VVIR pacemaker). Sex distribution and mean age between paced patients and control subjects were statistically comparable. The mean heartrate achieved by all paced patients at each time sample was compared with the normograms, assigning acceleration (slope) and rate (rate) scores for exercise and recovery phases. Scores ranged from -10 (hypochronotropic) to +10 (hyperchronotropic). Zero represents exact concordance with the responses of healthy individuals, and values between -2.5 and +2.5 were considered statistically similar to normal. During W, although the overall performances of the Dash, Sensolog, and Opus G did not statistically differ from healthy controls, the scores obtained by the Opus G were significantly closer to controls than those of the two other pacemakers (P = 0.02). For U, the three sensors were hypochronotropic (P = 0.03), though the Opus G was associated with a heart rate response closer to that of healthy controls (P = 0.04). D provided similar mean heart rate scores for the Opus G and the Dash compared with healthy controls, in contrast with the

  2. Surrogate Markers of Abdominal Aortic Aneurysm Progression.

    Science.gov (United States)

    Wanhainen, Anders; Mani, Kevin; Golledge, Jonathan

    2016-02-01

    The natural course of many abdominal aortic aneurysms (AAA) is to gradually expand and eventually rupture and monitoring the disease progression is essential to their management. In this publication, we review surrogate markers of AAA progression. AAA diameter remains the most widely used and important marker of AAA growth. Standardized reporting of reproducible methods of measuring AAA diameter is essential. Newer imaging assessments, such as volume measurements, biomechanical analyses, and functional and molecular imaging, as well as circulating biomarkers, have potential to add important information about AAA progression. Currently, however, there is insufficient evidence to recommend their routine use in clinical practice.

  3. Recovery Act: Develop a Modular Curriculum for Training University Students in Industry Standard CO{sub 2} Sequestration and Enhanced Oil Recovery Methodologies

    Energy Technology Data Exchange (ETDEWEB)

    Trentham, R. C.; Stoudt, E. L.

    2013-05-31

    CO{sub 2} Enhanced Oil Recovery, Sequestration, & Monitoring Measuring & Verification are topics that are not typically covered in Geoscience, Land Management, and Petroleum Engineering curriculum. Students are not typically exposed to the level of training that would prepare them for CO{sub 2} reservoir and aquifer sequestration related projects when they begin assignments in industry. As a result, industry training, schools & conferences are essential training venues for new & experienced personnel working on CO{sub 2} projects for the first time. This project collected and/or generated industry level CO{sub 2} training to create modules which faculties can utilize as presentations, projects, field trips and site visits for undergrad and grad students and prepare them to "hit the ground running" & be contributing participants in CO{sub 2} projects with minimal additional training. In order to create the modules, UTPB/CEED utilized a variety of sources. Data & presentations from industry CO{sub 2} Flooding Schools & Conferences, Carbon Management Workshops, UTPB Classes, and other venues was tailored to provide introductory reservoir & aquifer training, state-of-the-art methodologies, field seminars and road logs, site visits, and case studies for students. After discussions with faculty at UTPB, Sul Ross, Midland College, other universities, and petroleum industry professionals, it was decided to base the module sets on a series of road logs from Midland to, and through, a number of Permian Basin CO{sub 2} Enhanced Oil Recovery (EOR) projects, CO{sub 2} Carbon Capture and Storage (CCUS) projects and outcrop equivalents of the formations where CO{sub 2} is being utilized or will be utilized, in EOR projects in the Permian Basin. Although road logs to and through these projects exist, none of them included CO{sub 2} specific information. Over 1400 miles of road logs were created, or revised specifically to highlight CO{sub 2} EOR projects. After testing a number of

  4. Recovery of uranium and plutonium from Redox off-standard aqueous waste streams

    Energy Technology Data Exchange (ETDEWEB)

    Holm, C.H.; Matheson, A.R.

    1949-12-31

    In the operation of countercurrent extraction columns as in the Redox process, it is possible, and probable, that from unexpected behaviour of a column, operator error, colloid formation, etc., there will result from time to time excessive losses of uranium and plutonium in the overall process. These losses will naturally accumulate in the waste streams, particularly in the aqueous waste streams. If the loss is excessively high, and such lost material can be recovered by some additional method, then if economical and within reason, the recovered materials ran be returned to a ISF column for further processing. The objective of this work has been to develop such a method to recover uranium and plutonium from such off-standard waste streams in a form whereby the uranium send plutonium can be returned to the process line and subsequently purified and separated.

  5. Revisiting algorithms for generating surrogate time series

    CERN Document Server

    Raeth, C; Papadakis, I E; Brinkmann, W

    2011-01-01

    The method of surrogates is one of the key concepts of nonlinear data analysis. Here, we demonstrate that commonly used algorithms for generating surrogates often fail to generate truly linear time series. Rather, they create surrogate realizations with Fourier phase correlations leading to non-detections of nonlinearities. We argue that reliable surrogates can only be generated, if one tests separately for static and dynamic nonlinearities.

  6. Love as a regulative ideal in surrogate decision making.

    Science.gov (United States)

    Stonestreet, Erica Lucast

    2014-10-01

    This discussion aims to give a normative theoretical basis for a "best judgment" model of surrogate decision making rooted in a regulative ideal of love. Currently, there are two basic models of surrogate decision making for incompetent patients: the "substituted judgment" model and the "best interests" model. The former draws on the value of autonomy and responds with respect; the latter draws on the value of welfare and responds with beneficence. It can be difficult to determine which of these two models is more appropriate for a given patient, and both approaches may seem inadequate for a surrogate who loves the patient. The proposed "best judgment" model effectively draws on the values incorporated in each of the traditional standards, but does so because these values are important to someone who loves a patient, since love responds to the patient as the specific person she is.

  7. Fast Prediction and Evaluation of Gravitational Waveforms Using Surrogate Models

    Directory of Open Access Journals (Sweden)

    Scott E. Field

    2014-07-01

    Full Text Available We propose a solution to the problem of quickly and accurately predicting gravitational waveforms within any given physical model. The method is relevant for both real-time applications and more traditional scenarios where the generation of waveforms using standard methods can be prohibitively expensive. Our approach is based on three offline steps resulting in an accurate reduced order model in both parameter and physical dimensions that can be used as a surrogate for the true or fiducial waveform family. First, a set of m parameter values is determined using a greedy algorithm from which a reduced basis representation is constructed. Second, these m parameters induce the selection of m time values for interpolating a waveform time series using an empirical interpolant that is built for the fiducial waveform family. Third, a fit in the parameter dimension is performed for the waveform’s value at each of these m times. The cost of predicting L waveform time samples for a generic parameter choice is of order O(mL+mc_{fit} online operations, where c_{fit} denotes the fitting function operation count and, typically, m≪L. The result is a compact, computationally efficient, and accurate surrogate model that retains the original physics of the fiducial waveform family while also being fast to evaluate. We generate accurate surrogate models for effective-one-body waveforms of nonspinning binary black hole coalescences with durations as long as 10^{5}M, mass ratios from 1 to 10, and for multiple spherical harmonic modes. We find that these surrogates are more than 3 orders of magnitude faster to evaluate as compared to the cost of generating effective-one-body waveforms in standard ways. Surrogate model building for other waveform families and models follows the same steps and has the same low computational online scaling cost. For expensive numerical simulations of binary black hole coalescences, we thus anticipate extremely large speedups in

  8. Embrittlement recovery due to annealing of reactor pressure vessel steels

    Energy Technology Data Exchange (ETDEWEB)

    Eason, E.D.; Wright, J.E.; Nelson, E.E. [Modeling and Computing Services, Boulder, CO (United States); Odette, G.R.; Mader, E.V. [Univ. of California, Santa Barbara, CA (United States)

    1996-03-01

    Embrittlement of reactor pressure vessels (RPVs) can be reduced by thermal annealing at temperatures higher than the normal operating conditions. Although such an annealing process has not been applied to any commercial plants in the United States, one US Army reactor, the BR3 plant in Belgium, and several plants in eastern Europe have been successfully annealed. All available Charpy annealing data were collected and analyzed in this project to develop quantitative models for estimating the recovery in 30 ft-lb (41 J) Charpy transition temperature and Charpy upper shelf energy over a range of potential annealing conditions. Pattern recognition, transformation analysis, residual studies, and the current understanding of the mechanisms involved in the annealing process were used to guide the selection of the most sensitive variables and correlating parameters and to determine the optimal functional forms for fitting the data. The resulting models were fitted by nonlinear least squares. The use of advanced tools, the larger data base now available, and insight from surrogate hardness data produced improved models for quantitative evaluation of the effects of annealing. The quality of models fitted in this project was evaluated by considering both the Charpy annealing data used for fitting and the surrogate hardness data base. The standard errors of the resulting recovery models relative to calibration data are comparable to the uncertainty in unirradiated Charpy data. This work also demonstrates that microhardness recovery is a good surrogate for transition temperature shift recovery and that there is a high level of consistency between the observed annealing trends and fundamental models of embrittlement and recovery processes.

  9. Composite Sampling Approaches for Bacillus anthracis Surrogate Extracted from Soil.

    Directory of Open Access Journals (Sweden)

    Brian France

    Full Text Available Any release of anthrax spores in the U.S. would require action to decontaminate the site and restore its use and operations as rapidly as possible. The remediation activity would require environmental sampling, both initially to determine the extent of contamination (hazard mapping and post-decon to determine that the site is free of contamination (clearance sampling. Whether the spore contamination is within a building or outdoors, collecting and analyzing what could be thousands of samples can become the factor that limits the pace of restoring operations. To address this sampling and analysis bottleneck and decrease the time needed to recover from an anthrax contamination event, this study investigates the use of composite sampling. Pooling or compositing of samples is an established technique to reduce the number of analyses required, and its use for anthrax spore sampling has recently been investigated. However, use of composite sampling in an anthrax spore remediation event will require well-documented and accepted methods. In particular, previous composite sampling studies have focused on sampling from hard surfaces; data on soil sampling are required to extend the procedure to outdoor use. Further, we must consider whether combining liquid samples, thus increasing the volume, lowers the sensitivity of detection and produces false negatives. In this study, methods to composite bacterial spore samples from soil are demonstrated. B. subtilis spore suspensions were used as a surrogate for anthrax spores. Two soils (Arizona Test Dust and sterilized potting soil were contaminated and spore recovery with composites was shown to match individual sample performance. Results show that dilution can be overcome by concentrating bacterial spores using standard filtration methods. This study shows that composite sampling can be a viable method of pooling samples to reduce the number of analysis that must be performed during anthrax spore remediation.

  10. Composite Sampling Approaches for Bacillus anthracis Surrogate Extracted from Soil

    Science.gov (United States)

    France, Brian; Bell, William; Chang, Emily; Scholten, Trudy

    2015-01-01

    Any release of anthrax spores in the U.S. would require action to decontaminate the site and restore its use and operations as rapidly as possible. The remediation activity would require environmental sampling, both initially to determine the extent of contamination (hazard mapping) and post-decon to determine that the site is free of contamination (clearance sampling). Whether the spore contamination is within a building or outdoors, collecting and analyzing what could be thousands of samples can become the factor that limits the pace of restoring operations. To address this sampling and analysis bottleneck and decrease the time needed to recover from an anthrax contamination event, this study investigates the use of composite sampling. Pooling or compositing of samples is an established technique to reduce the number of analyses required, and its use for anthrax spore sampling has recently been investigated. However, use of composite sampling in an anthrax spore remediation event will require well-documented and accepted methods. In particular, previous composite sampling studies have focused on sampling from hard surfaces; data on soil sampling are required to extend the procedure to outdoor use. Further, we must consider whether combining liquid samples, thus increasing the volume, lowers the sensitivity of detection and produces false negatives. In this study, methods to composite bacterial spore samples from soil are demonstrated. B. subtilis spore suspensions were used as a surrogate for anthrax spores. Two soils (Arizona Test Dust and sterilized potting soil) were contaminated and spore recovery with composites was shown to match individual sample performance. Results show that dilution can be overcome by concentrating bacterial spores using standard filtration methods. This study shows that composite sampling can be a viable method of pooling samples to reduce the number of analysis that must be performed during anthrax spore remediation. PMID:26714315

  11. Composite Sampling Approaches for Bacillus anthracis Surrogate Extracted from Soil.

    Science.gov (United States)

    France, Brian; Bell, William; Chang, Emily; Scholten, Trudy

    2015-01-01

    Any release of anthrax spores in the U.S. would require action to decontaminate the site and restore its use and operations as rapidly as possible. The remediation activity would require environmental sampling, both initially to determine the extent of contamination (hazard mapping) and post-decon to determine that the site is free of contamination (clearance sampling). Whether the spore contamination is within a building or outdoors, collecting and analyzing what could be thousands of samples can become the factor that limits the pace of restoring operations. To address this sampling and analysis bottleneck and decrease the time needed to recover from an anthrax contamination event, this study investigates the use of composite sampling. Pooling or compositing of samples is an established technique to reduce the number of analyses required, and its use for anthrax spore sampling has recently been investigated. However, use of composite sampling in an anthrax spore remediation event will require well-documented and accepted methods. In particular, previous composite sampling studies have focused on sampling from hard surfaces; data on soil sampling are required to extend the procedure to outdoor use. Further, we must consider whether combining liquid samples, thus increasing the volume, lowers the sensitivity of detection and produces false negatives. In this study, methods to composite bacterial spore samples from soil are demonstrated. B. subtilis spore suspensions were used as a surrogate for anthrax spores. Two soils (Arizona Test Dust and sterilized potting soil) were contaminated and spore recovery with composites was shown to match individual sample performance. Results show that dilution can be overcome by concentrating bacterial spores using standard filtration methods. This study shows that composite sampling can be a viable method of pooling samples to reduce the number of analysis that must be performed during anthrax spore remediation.

  12. Summary of Remediated Nitrate Salt Surrogate Formulation and Testing

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Geoffrey Wayne [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Leonard, Philip [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hartline, Ernest Leon [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Tian, Hongzhao [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-05-05

    High Explosives Science and Technology (M-7) completed all required formulation and testing of Remediated Nitrate Salt (RNS) surrogates on April 27, 2016 as specified in PLAN-TA9-2443 Rev B, "Remediated Nitrate Salt (RNS) Surrogate Formulation and Testing Standard Procedure", released February 16, 2016. This report summarizes the results of the work and also includes additional documentation required in that test plan. All formulation and testing was carried out according to PLAN-TA9-2443 Rev B. The work was carried out in three rounds, with the full matrix of samples formulated and tested in each round. Results from the first round of formulation and testing were documented in memorandum M7-J6-6042, " Results from First Round of Remediated Nitrate Salt Surrogate Formulation and Testing." Results from the second round of formulation and testing were documented in M7-16-6053 , "Results from the Second Round of Remediated Nitrate Salt Surrogate Formulation and Testing." Initial results from the third round were documented in M7-16-6057, "Initial Results from the Third Round of Remediated Nitrate Salt Formulation and Testing."

  13. Surrogate Analysis and Index Developer (SAID) tool

    Science.gov (United States)

    Domanski, Marian M.; Straub, Timothy D.; Landers, Mark N.

    2015-10-01

    The use of acoustic and other parameters as surrogates for suspended-sediment concentrations (SSC) in rivers has been successful in multiple applications across the Nation. Tools to process and evaluate the data are critical to advancing the operational use of surrogates along with the subsequent development of regression models from which real-time sediment concentrations can be made available to the public. Recent developments in both areas are having an immediate impact on surrogate research and on surrogate monitoring sites currently (2015) in operation.

  14. Results from Second Round of Remediated Nitrate Salt Surrogate Formulation and Testing

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Geoffrey Wayne [Los Alamos National Laboratory; Leonard, Philip [Los Alamos National Laboratory; Hartline, Ernest Leon [Los Alamos National Laboratory; Tian, Hongzhao [Los Alamos National Laboratory

    2016-04-04

    High Explosives and Technology (M-7) completed the second round of formulation and testing of Remediated Nitrate Salt (RNS) surrogates on March 17, 2016. This report summarizes the results of the work and also includes additional documentation required under test plan PLAN-TA9-2443 Rev B, "Remediated Nitrate Salt (RNS) Surrogate Formulation and Testing Standard Procedure", released February 16, 2016. All formulation and testing was carried out according to PLAN-TA9-2443 Rev B. Results from the first round of formulation and testing were documented in memorandum M7-16-6042, "Results from First Round of Remediated Nitrate Salt Surrogate Formulation and Testing."

  15. Imaging Seeker Surrogate for IRCM evaluation

    NARCIS (Netherlands)

    Schleijpen, H.M.A.; Carpenter, S.R.; Mellier, B.; Dimmeler, A.

    2007-01-01

    NATO-SCI-139 and its predecessor groups have more than a decade of history in the evaluation and recommendation of EO and IR Countermeasures against anti-aircraft missiles. Surrogate Seekers have proven to be a valuable tool for this work. The use of surrogate seekers in international co-operations

  16. 77 FR 34788 - Surrogate Foreign Corporations

    Science.gov (United States)

    2012-06-12

    ... Internal Revenue Service 26 CFR Part 1 RIN 1545-BF47 Surrogate Foreign Corporations AGENCY: Internal... regulations regarding whether a foreign corporation is treated as a surrogate foreign corporation. The final ] regulations affect certain domestic corporations and partnerships (and certain parties related thereto),...

  17. Surrogate Guderley Test Problem Definition

    Energy Technology Data Exchange (ETDEWEB)

    Ramsey, Scott D. [Los Alamos National Laboratory; Shashkov, Mikhail J. [Los Alamos National Laboratory

    2012-07-06

    The surrogate Guderley problem (SGP) is a 'spherical shock tube' (or 'spherical driven implosion') designed to ease the notoriously subtle initialization of the true Guderley problem, while still maintaining a high degree of fidelity. In this problem (similar to the Guderley problem), an infinitely strong shock wave forms and converges in one-dimensional (1D) cylindrical or spherical symmetry through a polytropic gas with arbitrary adiabatic index {gamma}, uniform density {rho}{sub 0}, zero velocity, and negligible pre-shock pressure and specific internal energy (SIE). This shock proceeds to focus on the point or axis of symmetry at r = 0 (resulting in ostensibly infinite pressure, velocity, etc.) and reflect back out into the incoming perturbed gas.

  18. Use of Surrogate end points in HTA

    Directory of Open Access Journals (Sweden)

    Mangiapane, Sandra

    2009-08-01

    Full Text Available The different actors involved in health system decision-making and regulation have to deal with the question which are valid parameters to assess the health value of health technologies.So called surrogate endpoints represent in the best case preliminary steps in the casual chain leading to the relevant outcome (e. g. mortality, morbidity and are not usually directly perceptible by patients. Surrogate endpoints are not only used in trials of pharmaceuticals but also in studies of other technologies. Their use in the assessment of the benefit of a health technology is however problematic. In this report we intend to answer the following research questions: Which criteria need to be fulfilled for a surrogate parameter to be considered a valid endpoint? Which methods have been described in the literature for the assessment of the validity of surrogate endpoints? Which methodological recommendations concerning the use of surrogate endpoints have been made by international HTA agencies? Which place has been given to surrogate endpoints in international and German HTA reports? For this purpose, we choose three different approaches. Firstly, we conduct a review of the methodological literature dealing with the issue of surrogate endpoints and their validation. Secondly, we analyse current methodological guidelines of HTA agencies members of the International network of agencies for Health Technology Assessment (INAHTA as well as of agencies concerned with assessments for reimbursement purposes. Finally, we analyse the outcome parameter used in a sample of HTA reports available for the public. The analysis of methodological guidelines shows a very cautious position of HTA institutions regarding the use of surrogate endpoints in technology assessment. Surrogate endpoints have not been prominently used in HTA reports. None of the analysed reports based its conclusions solely on the results of surrogate endpoints. The analysis of German HTA reports shows a

  19. Regression calibration with more surrogates than mismeasured variables

    KAUST Repository

    Kipnis, Victor

    2012-06-29

    In a recent paper (Weller EA, Milton DK, Eisen EA, Spiegelman D. Regression calibration for logistic regression with multiple surrogates for one exposure. Journal of Statistical Planning and Inference 2007; 137: 449-461), the authors discussed fitting logistic regression models when a scalar main explanatory variable is measured with error by several surrogates, that is, a situation with more surrogates than variables measured with error. They compared two methods of adjusting for measurement error using a regression calibration approximate model as if it were exact. One is the standard regression calibration approach consisting of substituting an estimated conditional expectation of the true covariate given observed data in the logistic regression. The other is a novel two-stage approach when the logistic regression is fitted to multiple surrogates, and then a linear combination of estimated slopes is formed as the estimate of interest. Applying estimated asymptotic variances for both methods in a single data set with some sensitivity analysis, the authors asserted superiority of their two-stage approach. We investigate this claim in some detail. A troubling aspect of the proposed two-stage method is that, unlike standard regression calibration and a natural form of maximum likelihood, the resulting estimates are not invariant to reparameterization of nuisance parameters in the model. We show, however, that, under the regression calibration approximation, the two-stage method is asymptotically equivalent to a maximum likelihood formulation, and is therefore in theory superior to standard regression calibration. However, our extensive finite-sample simulations in the practically important parameter space where the regression calibration model provides a good approximation failed to uncover such superiority of the two-stage method. We also discuss extensions to different data structures.

  20. On Using Surrogates with Genetic Programming.

    Science.gov (United States)

    Hildebrandt, Torsten; Branke, Jürgen

    2015-01-01

    One way to accelerate evolutionary algorithms with expensive fitness evaluations is to combine them with surrogate models. Surrogate models are efficiently computable approximations of the fitness function, derived by means of statistical or machine learning techniques from samples of fully evaluated solutions. But these models usually require a numerical representation, and therefore cannot be used with the tree representation of genetic programming (GP). In this paper, we present a new way to use surrogate models with GP. Rather than using the genotype directly as input to the surrogate model, we propose using a phenotypic characterization. This phenotypic characterization can be computed efficiently and allows us to define approximate measures of equivalence and similarity. Using a stochastic, dynamic job shop scenario as an example of simulation-based GP with an expensive fitness evaluation, we show how these ideas can be used to construct surrogate models and improve the convergence speed and solution quality of GP.

  1. Surrogate mobility and orientation affect the early neurobehavioral development of infant rhesus macaques (Macaca mulatta).

    Science.gov (United States)

    Dettmer, Amanda M; Ruggiero, Angela M; Novak, Melinda A; Meyer, Jerrold S; Suomi, Stephen J

    2008-05-01

    A biological mother's movement appears necessary for optimal development in infant monkeys. However, nursery-reared monkeys are typically provided with inanimate surrogate mothers that move very little. The purpose of this study was to evaluate the effects of a novel, highly mobile surrogate mother on motor development, exploration, and reactions to novelty. Six infant rhesus macaques (Macaca mulatta) were reared on mobile hanging surrogates (MS) and compared to six infants reared on standard stationary rocking surrogates (RS) and to 9-15 infants reared with their biological mothers (MR) for early developmental outcome. We predicted that MS infants would develop more similarly to MR infants than RS infants. In neonatal assessments conducted at Day 30, both MS and MR infants showed more highly developed motor activity than RS infants on measures of grasping (p = .009), coordination (p = .038), spontaneous crawl (p = .009), and balance (p = .003). At 2-3 months of age, both MS and MR infants displayed higher levels of exploration in the home cage than RS infants (p = .016). In a novel situation in which only MS and RS infants were tested, MS infants spent less time near their surrogates in the first five minutes of the test session than RS infants (p = .05), indicating a higher level of comfort. Collectively, these results suggest that when nursery-rearing of infant monkeys is necessary, a mobile hanging surrogate may encourage more normative development of gross motor skills and exploratory behavior and may serve as a useful alternative to stationary or rocking surrogates.

  2. Parents and children: "surrogate" paradigm of modernity.

    Science.gov (United States)

    Adam, Archimandrite; Akhaladze, Vakhtang

    2011-06-01

    The article provides an overview of surrogate motherhood--one of many currently available forms of Assisted Reproductive Technologies for couples who find themselves unable to conceive a child on their own. Within the years of its existence surrogate motherhood managed to accumulate lots of bioethical problems, paradoxes, dilemmas and collisions. Author represents some of them. Also the legal, moral and religious implications of surrogacy are addressed. The religious perspective from the Orthodox Christian, Catholic, Jewish, Hinduism, and Islamic points of view are provided. The author concludes that surrogate motherhood is not only the answer to childlessness but it supports metamorphosis of traditional attitude towards such human value as it is a family.

  3. Surrogate endpoints and emerging surrogate endpoints for risk reduction of cardiovascular disease.

    Science.gov (United States)

    Rasnake, Crystal M; Trumbo, Paula R; Heinonen, Therese M

    2008-02-01

    This article reviews surrogate endpoints and emerging biomarkers that were discussed at the annual "Cardiovascular Biomarkers and Surrogate Endpoints" symposium cosponsored by the US Food and Drug Administration (FDA) and the Montreal Heart Institute. The FDA's Center for Food Safety and Applied Nutrition (CFSAN) uses surrogate endpoints in its scientific review of a substance/disease relationship for a health claim. CFSAN currently recognizes three validated surrogate endpoints: blood pressure, blood total cholesterol, and blood low-density lipoprotein (LDL) concentration in its review of a health claim for cardiovascular disease (CVD). Numerous potential surrogate endpoints of CVD are being evaluated as the pathophysiology of heart disease is becoming better understood. However, these emerging biomarkers need to be validated as surrogate endpoints before they are used by CFSAN in the evaluation of a CVD health claim.

  4. Surrogate mothers: whose baby is it?

    Science.gov (United States)

    Cohen, B

    1984-01-01

    Advances in medical technology offer infertile couples who wish to raise children alternatives to adoption. The increasing number of surrogate mother contracts creates a myriad of legal issues surrounding the rights of the natural mother, the natural father and the child that is produced. In this Article, the Author discusses the legal issues and rights of the parties under the Constitution, the surrogate contract and family law principles. The Author proposes that courts should consider a surrogate contract as a revocable prebirth agreement which allows the natural mother to keep the child if she chooses. In addition, the Author advocates an interpretation of the statutes forbidding baby selling that would prohibit surrogate contracts in which the mother is paid a fee for the child.

  5. 54 FR 38044: National Emission Standards for Hazardous Air Pollutants; Benzene Emissions From Maleic Anhydride Plants, Ethylbenzene/Styrene Plants, Benzene Storage Vessels, Benzene Equipment Leaks, and Coke By- Product Recovery Plants

    Science.gov (United States)

    Final Rule on National Emission Standards for Hazardous Air Pollutants; Benzene Emissions From Maleic Anhydride Plants, Ethylbenzene/Styrene Plants, Benzene Storage Vessels, Benzene Equipment Leaks, and Coke By-Product Recovery Plants.

  6. Neutron capture cross sections from Surrogate measurements

    Directory of Open Access Journals (Sweden)

    Scielzo N.D.

    2010-03-01

    Full Text Available The prospects for determining cross sections for compound-nuclear neutron-capture reactions from Surrogate measurements are investigated. Calculations as well as experimental results are presented that test the Weisskopf-Ewing approximation, which is employed in most analyses of Surrogate data. It is concluded that, in general, one has to go beyond this approximation in order to obtain (n,γ cross sections of sufficient accuracy for most astrophysical and nuclear-energy applications.

  7. Observing Migration and Burial of Unexploded Ordnance in the Nearshore Environment with Instrumented Surrogates

    Science.gov (United States)

    Bruder, B. L.; Cristaudo, D.; Puleo, J. A.

    2016-12-01

    Prior to 1972, it was legal and common practice to unload unexploded ordnance (UXO) into the ocean. Only 60-100 miles off the US coast alone there are 72 dumping sites where it is estimated 31 million pounds of UXO lie. As recently as 2015, UXO have been found not only in the nearshore environment, but on populated beaches. Thus, understanding the migration and burial of these objects is not only of oceanographic interest, but a matter of public safety. The presented project evaluates the efficacy of instrumented UXO surrogates for observing munition migration and burial. Instrumented surrogates were exposed to near prototype scale wave conditions over a mobile bed at the Littoral Warfare Environment at Aberdeen Test Center, MD. Surrogates were deployed in the swash zone, inner and outer surf zones. Dependent on munition size, surrogates housed multiple suites of self-logging sensors. Sensor suites included different combinations of inertial motion units, ultra-wideband tracking tags, pressure transducers, shock recorders, and photocells. Preliminary results show sensor suites can resolve various types of surrogate movement. Pressure transducers accurately record ambient wave conditions as well as changes in mean depth due to surrogate migration. Inertial motion units resolve munition accelerations for rolling and translational motion. Inertial motion unit data is used to estimate trajectory as well when coupled with mean depth and bathymetric data. Photocells, which measure ambient light, resolve munition burial as well as serve as proxies for surrounding environmental conditions such as suspended sediment and water depth. The presented project will continue to utilize and couple surrogate sensor data to resolve munition movement and burial under different conditions. Knowledge of munition migration helps focus UXO detection and recovery, conserving US military and coastal resources.

  8. Design, development, and analysis of a surrogate for pulmonary injury prediction.

    Science.gov (United States)

    Danelson, Kerry A; Gayzik, F Scott; Stern, Amber Rath; Hoth, J Jason; Stitzel, Joel D

    2011-10-01

    Current anthropomorphic test devices (ATDs) measure chest acceleration and deflection to assess risk of injury to the thorax. This study presents a lung surrogate prototype designed to expand the injury assessment capabilities of ATDs to include a risk measure for pulmonary contusion (PC). The surrogate augments these existing measures by providing pressure data specific to the lung and its lobes. The prototype was created from a rendering of a 50th percentile male lung inflated to normal inspiration, obtained from clinical CT data. Surrogate size, lobe volume, and airway cross sections were selected to match the morphology of the lung. Elastomeric urethane was molded via rapid prototyping to create a functional prototype. Pressure sensors in each of the five terminal airways independently monitored pressure traces in the lobes during impacts to the surrogate. Software was created to analyze the surrogate impact pressure data, determine the lobe with the greatest pressure rise for a particular impact, and estimate the initial speed of surface deformation. Calibration testing indicates an approximately linear relationship between peak lobe pressure and surface impact speed. No type I or II errors were demonstrated during lobe detection testing. During repeatability testing, the standard deviation was between 2 and 4% of the mean peak pressure. Ongoing research will focus on correlating surrogate data, pressure pulses, or surface deformation, to risk functions for PC.

  9. Modeling of Heating and Evaporation of FACE I Gasoline Fuel and its Surrogates

    KAUST Repository

    Elwardani, Ahmed Elsaid

    2016-04-05

    The US Department of Energy has formulated different gasoline fuels called \\'\\'Fuels for Advanced Combustion Engines (FACE)\\'\\' to standardize their compositions. FACE I is a low octane number gasoline fuel with research octane number (RON) of approximately 70. The detailed hydrocarbon analysis (DHA) of FACE I shows that it contains 33 components. This large number of components cannot be handled in fuel spray simulation where thousands of droplets are directly injected in combustion chamber. These droplets are to be heated, broken-up, collided and evaporated simultaneously. Heating and evaporation of single droplet FACE I fuel was investigated. The heating and evaporation model accounts for the effects of finite thermal conductivity, finite liquid diffusivity and recirculation inside the droplet, referred to as the effective thermal conductivity/effective diffusivity (ETC/ED) model. The temporal variations of the liquid mass fractions of the droplet components were used to characterize the evaporation process. Components with similar evaporation characteristics were merged together. A representative component was initially chosen based on the highest initial mass fraction. Three 6 components surrogates, Surrogate 1-3, that match evaporation characteristics of FACE I have been formulated without keeping same mass fractions of different hydrocarbon types. Another two surrogates (Surrogate 4 and 5) were considered keeping same hydrocarbon type concentrations. A distillation based surrogate that matches measured distillation profile was proposed. The calculated molar mass, hydrogen-to-carbon (H/C) ratio and RON of Surrogate 4 and distillation based one are close to those of FACE I.

  10. Surrogates for herbicide removal in stormwater biofilters.

    Science.gov (United States)

    Zhang, Kefeng; Deletic, Ana; Page, Declan; McCarthy, David T

    2015-09-15

    Real time monitoring of suitable surrogate parameters are critical to the validation of any water treatment processes, and is of particularly high importance for validation of natural stormwater treatment systems. In this study, potential surrogates for herbicide removal in stormwater biofilters (also known as stormwater bio-retention or rain-gardens) were assessed using field challenge tests and matched laboratory column experiments. Differential UV absorbance at 254mn (ΔUVA254), total phosphorus (ΔTP), dissolved phosphorus (ΔDP), total nitrogen (ΔTN), ammonia (ΔNH3), nitrate and nitrite (ΔNO3+NO2), dissolved organic carbon (ΔDOC) and total suspended solids (ΔTSS) were compared with glyphosate, atrazine, simazine and prometryn removal rates. The influence of different challenge conditions on the performance of each surrogate was studied. Differential TP was significantly and linearly related to glyphosate reduction (R(2) = 0.75-0.98, P herbicides were reliable under normal and challenge dry conditions, but weaker correlations were observed under challenge wet conditions. Of those tested, ΔTP is the most promising surrogate for glyphosate removal and ΔUVA254 is a suitable surrogate for triazines removal in stormwater biofilters. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. [Deuterated surrogate and UPLC-MS/MS method for simultaneous determination of 22 endocannabinoids in ovariectomized rat plasma].

    Science.gov (United States)

    Xiang, Shi-Xie; Xu, Ying; Zhu, Jing-Jing; Wang, Zhi-Min; Zhang, Dong; Chen, Liang-Mian; Feng, Wei-Hong

    2016-11-01

    A new method based on ultraperformance liquid chromatography-tandem mass spectrometry(UPLC-MS/MS) was developed for the simultaneous determination of 22 endocannabinoids(eCBs) and relevant compounds in ovariectomized rat plasma. After being extracted by solid-phase column(SPE), the plasma samples were detected by using UPLC-MS/MS. Analysis was carried out with ACQUITY UPLC BEH C₁₈ column. The mobile phase was 0.1% acetic acid solution(A)-acetonitrile and isopropanol(9∶1, B) for the gradient elution. In the positive ion multiple reaction monitoring(MRM) mode, deuterated reagents were taken as standard alternatives to calculate recoveries and simultaneously quantify 22 endocannabinoids. The established method provided a good linearity for the 22 eCBs, and their linearly dependent coefficients were all higher than 0.99. The limits of quantitation(LOQs) ranged from 0.089 6 to 1.965 2 nmol•L-1. Relative recoveries of 5 deuterated surrogates ranged between 11.40% and 129.9%. The repeatability study results showed that RSD was all less than 8.0%. The established method could be used to analyze PGF2a EA, AEA and other endogenous cannabinoids in plasma samples of ovariectomized rats. In summary, this method was proved to boast a high sensitivity, repeatability and practicability, and thus could be used in rat plasma lipid metabolomics study. Copyright© by the Chinese Pharmaceutical Association.

  12. Nitrate Salt Surrogate Blending Scoping Test Plan

    Energy Technology Data Exchange (ETDEWEB)

    Anast, Kurt Roy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-11-13

    Test blending equipment identified in the “Engineering Options Assessment Report: Nitrate Salt Waste Stream Processing”. Determine if the equipment will provide adequate mixing of zeolite and surrogate salt/Swheat stream; optimize equipment type and operational sequencing; impact of baffles and inserts on mixing performance; and means of validating mixing performance

  13. Videotrees: Improving video surrogate presentation using hierarchy

    NARCIS (Netherlands)

    Jansen, Michel; Heeren, Willemijn; Dijk, van Betsy

    2008-01-01

    As the amount of available video content increases, so does the need for better ways of browsing all this material. Because the nature of video makes it hard to process, the need arises for adequate surrogates for video that can readily be skimmed and browsed. In this paper, the effects of the use o

  14. Combustion Kinetic Studies of Gasolines and Surrogates

    KAUST Repository

    Javed, Tamour

    2016-11-01

    Future thrusts for gasoline engine development can be broadly summarized into two categories: (i) efficiency improvements in conventional spark ignition engines, and (ii) development of advance compression ignition (ACI) concepts. Efficiency improvements in conventional spark ignition engines requires downsizing (and turbocharging) which may be achieved by using high octane gasolines, whereas, low octane gasolines fuels are anticipated for ACI concepts. The current work provides the essential combustion kinetic data, targeting both thrusts, that is needed to develop high fidelity gasoline surrogate mechanisms and surrogate complexity guidelines. Ignition delay times of a wide range of certified gasolines and surrogates are reported here. These measurements were performed in shock tubes and rapid compression machines over a wide range of experimental conditions (650 – 1250 K, 10 – 40 bar) relevant to internal combustion engines. Using the measured the data and chemical kinetic analyses, the surrogate complexity requirements for these gasolines in homogeneous environments are specified. For the discussions presented here, gasolines are classified into three categories: (i)\\tLow octane gasolines including Saudi Aramco’s light naphtha fuel (anti-knock index, AKI = (RON + MON)/2 = 64; Sensitivity (S) = RON – MON = 1), certified FACE (Fuels for Advanced Combustion Engines) gasoline I and J (AKI ~ 70, S = 0.7 and 3 respectively), and their Primary Reference Fuels (PRF, mixtures of n-heptane and iso-octane) and multi-component surrogates. (ii)\\t Mid octane gasolines including FACE A and C (AKI ~ 84, S ~ 0 and 1 respectively) and their PRF surrogates. Laser absorption measurements of intermediate and product species formed during gasoline/surrogate oxidation are also reported. (iii)\\t A wide range of n-heptane/iso-octane/toluene (TPRF) blends to adequately represent the octane and sensitivity requirements of high octane gasolines including FACE gasoline F and G

  15. A novel surrogate index for hepatic insulin resistance.

    LENUS (Irish Health Repository)

    Vangipurapu, J

    2011-03-01

    In epidemiological and genetic studies surrogate indices are needed to investigate insulin resistance in different insulin-sensitive tissues. Our objective was to develop a surrogate index for hepatic insulin resistance.

  16. Compaction behavior of surrogate degraded emplaced WIPP waste.

    Energy Technology Data Exchange (ETDEWEB)

    Broome, Scott Thomas [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bronowski, David R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kuthakun, Souvanny James [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Herrick, Courtney Grant [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Pfeifle, Thomas W. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-03-01

    The present study results are focused on laboratory testing of surrogate waste materials. The surrogate wastes correspond to a conservative estimate of degraded Waste Isolation Pilot Plant (WIPP) containers and TRU waste materials at the end of the 10,000 year regulatory period. Testing consists of hydrostatic, triaxial, and uniaxial strain tests performed on surrogate waste recipes that were previously developed by Hansen et al. (1997). These recipes can be divided into materials that simulate 50% and 100% degraded waste by weight. The percent degradation indicates the anticipated amount of iron corrosion, as well as the decomposition of cellulosics, plastics, and rubbers (CPR). Axial, lateral, and volumetric strain and axial, lateral, and pore stress measurements were made. Two unique testing techniques were developed during the course of the experimental program. The first involves the use of dilatometry to measure sample volumetric strain under a hydrostatic condition. Bulk moduli of the samples measured using this technique were consistent with those measured using more conventional methods. The second technique involved performing triaxial tests under lateral strain control. By limiting the lateral strain to zero by controlling the applied confining pressure while loading the specimen axially in compression, one can maintain a right-circular cylindrical geometry even under large deformations. This technique is preferred over standard triaxial testing methods which result in inhomogeneous deformation or (3z(Bbarreling(3y. (BManifestations of the inhomogeneous deformation included non-uniform stress states, as well as unrealistic Poissons ratios (> 0.5) or those that vary significantly along the length of the specimen. Zero lateral strain controlled tests yield a more uniform stress state, and admissible and uniform values of Poissons ratio.

  17. Surrogate pregnancy in a patient who underwent radical hysterectomy and bilateral transposition of ovaries.

    Science.gov (United States)

    Azem, Foad; Yovel, Israel; Wagman, Israel; Kapostiansky, Rita; Lessing, Joseph B; Amit, Ami

    2003-05-01

    To evaluate IVF-surrogate pregnancy in a patient with ovarian transposition after radical hysterectomy for carcinoma of the cervix. Case report. A maternity hospital in Tel Aviv that is a major tertiary care and referral center. A 29-year-old woman who underwent Wertheim's hysterectomy for carcinoma of the uterine cervix and ovarian transposition before total pelvic irradiation. Standard IVF treatment, transabdominal oocyte retrieval, and transfer to surrogate mother. Outcome of IVF cycle. A twin pregnancy in the first cycle. This is the second reported case of controlled ovarian stimulation and oocyte retrieval performed on a transposed ovary.

  18. Initial Results from the Third Round of Remediated Nitrate Salt Surrogate Formulation and Testing

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Geoffrey Wayne [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Leonard, Philip [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hartline, Ernest Leon [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Tian, Hongzhao [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-04-20

    High explosives science and technology (M-7) is currently working on the third round of formulation and testing of Remediated nitrate salt (RNS) surrogates. This report summarizes the calorimetry results from the 15% sWheat mixtures. All formulation and testing was carried out according to PLAN-TA9-2443 Rev B, "Remediated Nitrate Salt (RNS) surrogate formulation and testing standard procedure", released February 16, 2016. Results from the first and second rounds of formulation and testing were documented in memoranda M7-16-6042 and M7-16-6053.

  19. Surrogate-assisted feature extraction for high-throughput phenotyping.

    Science.gov (United States)

    Yu, Sheng; Chakrabortty, Abhishek; Liao, Katherine P; Cai, Tianrun; Ananthakrishnan, Ashwin N; Gainer, Vivian S; Churchill, Susanne E; Szolovits, Peter; Murphy, Shawn N; Kohane, Isaac S; Cai, Tianxi

    2017-04-01

    Phenotyping algorithms are capable of accurately identifying patients with specific phenotypes from within electronic medical records systems. However, developing phenotyping algorithms in a scalable way remains a challenge due to the extensive human resources required. This paper introduces a high-throughput unsupervised feature selection method, which improves the robustness and scalability of electronic medical record phenotyping without compromising its accuracy. The proposed Surrogate-Assisted Feature Extraction (SAFE) method selects candidate features from a pool of comprehensive medical concepts found in publicly available knowledge sources. The target phenotype's International Classification of Diseases, Ninth Revision and natural language processing counts, acting as noisy surrogates to the gold-standard labels, are used to create silver-standard labels. Candidate features highly predictive of the silver-standard labels are selected as the final features. Algorithms were trained to identify patients with coronary artery disease, rheumatoid arthritis, Crohn's disease, and ulcerative colitis using various numbers of labels to compare the performance of features selected by SAFE, a previously published automated feature extraction for phenotyping procedure, and domain experts. The out-of-sample area under the receiver operating characteristic curve and F -score from SAFE algorithms were remarkably higher than those from the other two, especially at small label sizes. SAFE advances high-throughput phenotyping methods by automatically selecting a succinct set of informative features for algorithm training, which in turn reduces overfitting and the needed number of gold-standard labels. SAFE also potentially identifies important features missed by automated feature extraction for phenotyping or experts.

  20. Analytical approximations for temperature dependent thermophysical properties of supercritical diesel fuel surrogates used in combustion modeling

    Science.gov (United States)

    Kumar, Abhinav; Saini, Vishnu; Dondapati, Raja Sekhar; Usurumarti, Preeti Rao

    2017-07-01

    Supercritical fluid technology is introduced to combat the critical challenges related with emissions, incomplete and clean diesel fuel combustion. The chemical kinetics of diesel fuel is a strong function of temperature. As surrogate fuels have a potential to represent a real diesel fuel, thermophysical properties of such fuels have been studied in this present work as a function of temperature. Further, two diesel surrogate fuels which have been identified as the components of actual diesel fuel for jet engines are studied and thermophysical properties of these two surrogates are evaluated as a function of temperature at critical pressure. In addition, the accuracy and reliability of the developed correlations is estimated using two statistical parameters such as Absolute Average of Relative Error (AARE) and Sum of Average Residues (SAR). Results show an excellent agreement between the standard data and the correlated property values.

  1. A qualitative investigation of selecting surrogate decision-makers

    NARCIS (Netherlands)

    Edwards, S.J.L.; Brown, P.; Twyman, M.A.; Christie, D.; Rakow, T.

    2011-01-01

    Background Empirical studies of surrogate decision-making tend to assume that surrogates should make only a 'substituted judgement'—that is, judge what the patient would want if they were mentally competent. Objectives To explore what people want in a surrogate decision-maker whom they themselves se

  2. System Reliability Analysis Capability and Surrogate Model Application in RAVEN

    Energy Technology Data Exchange (ETDEWEB)

    Rabiti, Cristian; Alfonsi, Andrea; Huang, Dongli; Gleicher, Frederick; Wang, Bei; Adbel-Khalik, Hany S.; Pascucci, Valerio; Smith, Curtis L.

    2015-11-01

    This report collect the effort performed to improve the reliability analysis capabilities of the RAVEN code and explore new opportunity in the usage of surrogate model by extending the current RAVEN capabilities to multi physics surrogate models and construction of surrogate models for high dimensionality fields.

  3. Recovery Swaps

    OpenAIRE

    Berd, Arthur M.

    2010-01-01

    We derive an arbitrage free relationship between recovery swap rates, digital default swap spreads and conventional CDS spreads, and argue that the fair forward recovery rate used in recovery swaps must contain a convexity premium over the expected recovery value.

  4. The Surrogate Method: Past, Present and Future

    Energy Technology Data Exchange (ETDEWEB)

    Lesher, S R; Bernstein, L A; Burke, J T; Lyles, B F; Clark, R M; Fallon, P; Phair, L

    2008-01-09

    The STARS/LiBerACE collaboration has been exploring the surrogate technique with success in the actinide region. This method uses a direct reaction to measure the decay probability of the same compound nucleus produced via a neutron-induced channel. This paper serves as an overview of these activities. Using the STARS array at 88-inch Cyclotron at Lawrence Berkeley National Laboratory we have explored the following surrogate reactions: {sup 234}U({alpha}, {alpha}{prime}f), {sup 235}U({sup 3}He, {alpha}f), {sup 236}U({alpha}, {alpha}{prime}f), {sup 238}U ({alpha},{alpha}{prime}f), {sup 238}U({sup 3}He,{alpha}f), {sup 238}U({sup 3}He, tf) surrogates for {sup 233}U(n,f), {sup 233}U(n,f), {sup 235}U(n,f), {sup 237}U(n,f), {sup 236}U(n,f), and {sup 237}Np(n,f), respectively.

  5. [Biomedical Perspective of the Surrogate Motherhood].

    Science.gov (United States)

    Jouve de la Barreda, Nicolás

    2017-01-01

    The subrogated motherhood takes place when an embryo created by in vitro fertilization (IVF) technology is implanted in a surrogate, sometimes called a gestational mother, by means a contract with her. It can imply to natural families (woman and man) with or without infertility problems, or to monoparental or biparental families of the same sex. Concerning the origin of the gametes used in the IVF emerges different implications on the genetic relationship of the resulting child with the surrogate and the future parents. The subrogated motherhood was initially considered an option to solve infertility problems. Nevertheless this practice has become a possible and attractive option as a source of economic resources for poor women. The cases of benefit of a pregnancy without mediating a contract are exceptional and they are not properly cases of ″subrogated maternity″ but of ″altruistic maternity″ and must be considered as heterologous in vitro fertilization. In this article are analyzed the medical, genetic and bioethics aspects of this new derivation of the fertilization in vitro. As points of special attention are considered the following questions: Is it the surrogate motherhood used preferably to solve infertility problems? Is not this actually a new form of exploitation of the woman? Does not suppose an attack to the natural family? Does not suppose in addition an attack to the dignity of the human being?

  6. Adhesion of human pathogenic enteric viruses and surrogate viruses to inert and vegetal food surfaces.

    Science.gov (United States)

    Deboosere, Nathalie; Pinon, Anthony; Caudrelier, Yvette; Delobel, Alexandre; Merle, Ghislaine; Perelle, Sylvie; Temmam, Sarah; Loutreul, Julie; Morin, Thierry; Estienney, Marie; Belliot, Gael; Pothier, Pierre; Gantzer, Christophe; Vialette, Michèle

    2012-10-01

    Enteric viruses, particularly human Noroviruses (NoV) and hepatitis A virus (HAV), are key food-borne pathogens. The attachment of these pathogens to foodstuff and food-contact surfaces is an important mechanism in the human contamination process. Studies were done to investigate the nature of the physicochemical forces, such as hydrophobic and electrostatic ones, involved in the interaction virus/matrix but, at this day, only few data are available concerning surface properties of viruses and prediction of the adhesion capacity of one specific virus onto matrices is still very difficult. The purpose of this study was to propose a reference system, including a representative virus surrogate, able to predict as close as possible behaviour of pathogenic viruses in term of adhesion on inert (stainless steel and polypropylene) and food surfaces (lettuce leaves, strawberries and raspberries). The adhesion of human pathogenic enteric viruses, cultivable strain of HAV and non-cultivable strains of human NoV (genogroups I and II), have been quantified and compared to these of human enteric viruses surrogates, included the MNV-1 and three F-specific RNA bacteriophages (MS2, GA and Qβ). A standardized approach was developed to assess and quantify viral adhesion on tested matrices after a contact time with each virus using real-time RT-PCR. Methods used for virus recovery were in accordance with the CEN recommendations, including a bovine Enterovirus type 1 as control to monitor the efficiency of the extraction process and amplification procedure from directly extracted or eluted samples. The adhesion of human pathogenic viruses, ranging from 0.1 to 2%, could be comparable for all matrices studied, except for NoV GII on soft fruits. Adhesion percentages obtained for the studied surrogate virus and phages were shown to be comparable to those of HAV and NoV on inert and lettuce surfaces. The MNV-1 appeared as the best candidate to simulate adhesion phenomena of all human

  7. Elevated Pressure Improves the Extraction and Identification of Proteins Recovered from Formalin-Fixed, Paraffin-Embedded Tissue Surrogates

    Science.gov (United States)

    Fowler, Carol B.; Chesnick, Ingrid E.; Moore, Cedric D.; O'Leary, Timothy J.; Mason, Jeffrey T.

    2010-01-01

    Background Proteomic studies of formalin-fixed paraffin-embedded (FFPE) tissues are frustrated by the inability to extract proteins from archival tissue in a form suitable for analysis by 2-D gel electrophoresis or mass spectrometry. This inability arises from the difficulty of reversing formaldehyde-induced protein adducts and cross-links within FFPE tissues. We previously reported the use of elevated hydrostatic pressure as a method for efficient protein recovery from a hen egg-white lysozyme tissue surrogate, a model system developed to study formalin fixation and histochemical processing. Principal Findings In this study, we demonstrate the utility of elevated hydrostatic pressure as a method for efficient protein recovery from FFPE mouse liver tissue and a complex multi-protein FFPE tissue surrogate comprised of hen egg-white lysozyme, bovine carbonic anhydrase, bovine ribonuclease A, bovine serum albumin, and equine myoglobin (55∶15∶15∶10∶5 wt%). Mass spectrometry of the FFPE tissue surrogates retrieved under elevated pressure showed that both the low and high-abundance proteins were identified with sequence coverage comparable to that of the surrogate mixture prior to formaldehyde treatment. In contrast, non-pressure-extracted tissue surrogate samples yielded few positive and many false peptide identifications. Studies with soluble formalin-treated bovine ribonuclease A demonstrated that pressure modestly inhibited the rate of reversal (hydrolysis) of formaldehyde-induced protein cross-links. Dynamic light scattering studies suggest that elevated hydrostatic pressure and heat facilitate the recovery of proteins free of formaldehyde adducts and cross-links by promoting protein unfolding and hydration with a concomitant reduction in the average size of the protein aggregates. Conclusions These studies demonstrate that elevated hydrostatic pressure treatment is a promising approach for improving the recovery of proteins from FFPE tissues in a form

  8. Elevated pressure improves the extraction and identification of proteins recovered from formalin-fixed, paraffin-embedded tissue surrogates.

    Directory of Open Access Journals (Sweden)

    Carol B Fowler

    Full Text Available BACKGROUND: Proteomic studies of formalin-fixed paraffin-embedded (FFPE tissues are frustrated by the inability to extract proteins from archival tissue in a form suitable for analysis by 2-D gel electrophoresis or mass spectrometry. This inability arises from the difficulty of reversing formaldehyde-induced protein adducts and cross-links within FFPE tissues. We previously reported the use of elevated hydrostatic pressure as a method for efficient protein recovery from a hen egg-white lysozyme tissue surrogate, a model system developed to study formalin fixation and histochemical processing. PRINCIPAL FINDINGS: In this study, we demonstrate the utility of elevated hydrostatic pressure as a method for efficient protein recovery from FFPE mouse liver tissue and a complex multi-protein FFPE tissue surrogate comprised of hen egg-white lysozyme, bovine carbonic anhydrase, bovine ribonuclease A, bovine serum albumin, and equine myoglobin (55∶15∶15∶10∶5 wt%. Mass spectrometry of the FFPE tissue surrogates retrieved under elevated pressure showed that both the low and high-abundance proteins were identified with sequence coverage comparable to that of the surrogate mixture prior to formaldehyde treatment. In contrast, non-pressure-extracted tissue surrogate samples yielded few positive and many false peptide identifications. Studies with soluble formalin-treated bovine ribonuclease A demonstrated that pressure modestly inhibited the rate of reversal (hydrolysis of formaldehyde-induced protein cross-links. Dynamic light scattering studies suggest that elevated hydrostatic pressure and heat facilitate the recovery of proteins free of formaldehyde adducts and cross-links by promoting protein unfolding and hydration with a concomitant reduction in the average size of the protein aggregates. CONCLUSIONS: These studies demonstrate that elevated hydrostatic pressure treatment is a promising approach for improving the recovery of proteins from FFPE

  9. Somatic coliphages as surrogates for enteroviruses in sludge hygienization treatments.

    Science.gov (United States)

    Martín-Díaz, Julia; Casas-Mangas, Raquel; García-Aljaro, Cristina; Blanch, Anicet R; Lucena, Francisco

    2016-01-01

    Conventional bacterial indicators present serious drawbacks giving information about viral pathogens persistence during sludge hygienization treatments. This calls for the search of alternative viral indicators. Somatic coliphages' (SOMCPH) ability for acting as surrogates for enteroviruses was assessed in 47 sludge samples subjected to novel treatment processes. SOMCPH, infectious enteroviruses and genome copies of enteroviruses were monitored. Only one of these groups, the bacteriophages, was present in the sludge at concentrations that allowed the evaluation of treatment's performance. An indicator/pathogen relationship of 4 log10 (PFU/g dw) was found between SOMCPH and infective enteroviruses and their detection accuracy was assessed. The obtained results and the existence of rapid and standardized methods encourage the inclusion of SOMCPH quantification in future sludge directives. In addition, an existing real-time quantitative polymerase chain reaction (RT-qPCR) for enteroviruses was adapted and applied.

  10. A Rigorous Framework for Optimization of Expensive Functions by Surrogates

    Science.gov (United States)

    Booker, Andrew J.; Dennis, J. E., Jr.; Frank, Paul D.; Serafini, David B.; Torczon, Virginia; Trosset, Michael W.

    1998-01-01

    The goal of the research reported here is to develop rigorous optimization algorithms to apply to some engineering design problems for which design application of traditional optimization approaches is not practical. This paper presents and analyzes a framework for generating a sequence of approximations to the objective function and managing the use of these approximations as surrogates for optimization. The result is to obtain convergence to a minimizer of an expensive objective function subject to simple constraints. The approach is widely applicable because it does not require, or even explicitly approximate, derivatives of the objective. Numerical results are presented for a 31-variable helicopter rotor blade design example and for a standard optimization test example.

  11. Testing Pairwise Association between Spatially Autocorrelated Variables: A New Approach Using Surrogate Lattice Data

    Science.gov (United States)

    Deblauwe, Vincent; Kennel, Pol; Couteron, Pierre

    2012-01-01

    Background Independence between observations is a standard prerequisite of traditional statistical tests of association. This condition is, however, violated when autocorrelation is present within the data. In the case of variables that are regularly sampled in space (i.e. lattice data or images), such as those provided by remote-sensing or geographical databases, this problem is particularly acute. Because analytic derivation of the null probability distribution of the test statistic (e.g. Pearson's r) is not always possible when autocorrelation is present, we propose instead the use of a Monte Carlo simulation with surrogate data. Methodology/Principal Findings The null hypothesis that two observed mapped variables are the result of independent pattern generating processes is tested here by generating sets of random image data while preserving the autocorrelation function of the original images. Surrogates are generated by matching the dual-tree complex wavelet spectra (and hence the autocorrelation functions) of white noise images with the spectra of the original images. The generated images can then be used to build the probability distribution function of any statistic of association under the null hypothesis. We demonstrate the validity of a statistical test of association based on these surrogates with both actual and synthetic data and compare it with a corrected parametric test and three existing methods that generate surrogates (randomization, random rotations and shifts, and iterative amplitude adjusted Fourier transform). Type I error control was excellent, even with strong and long-range autocorrelation, which is not the case for alternative methods. Conclusions/Significance The wavelet-based surrogates are particularly appropriate in cases where autocorrelation appears at all scales or is direction-dependent (anisotropy). We explore the potential of the method for association tests involving a lattice of binary data and discuss its potential for

  12. Two-dimensional surrogate contact modeling for computationally efficient dynamic simulation of total knee replacements.

    Science.gov (United States)

    Lin, Yi-Chung; Haftka, Raphael T; Queipo, Nestor V; Fregly, Benjamin J

    2009-04-01

    Computational speed is a major limiting factor for performing design sensitivity and optimization studies of total knee replacements. Much of this limitation arises from extensive geometry calculations required by contact analyses. This study presents a novel surrogate contact modeling approach to address this limitation. The approach involves fitting contact forces from a computationally expensive contact model (e.g., a finite element model) as a function of the relative pose between the contacting bodies. Because contact forces are much more sensitive to displacements in some directions than others, standard surrogate sampling and modeling techniques do not work well, necessitating the development of special techniques for contact problems. We present a computational evaluation and practical application of the approach using dynamic wear simulation of a total knee replacement constrained to planar motion in a Stanmore machine. The sample points needed for surrogate model fitting were generated by an elastic foundation (EF) contact model. For the computational evaluation, we performed nine different dynamic wear simulations with both the surrogate contact model and the EF contact model. In all cases, the surrogate contact model accurately reproduced the contact force, motion, and wear volume results from the EF model, with computation time being reduced from 13 min to 13 s. For the practical application, we performed a series of Monte Carlo analyses to determine the sensitivity of predicted wear volume to Stanmore machine setup issues. Wear volume was highly sensitive to small variations in motion and load inputs, especially femoral flexion angle, but not to small variations in component placements. Computational speed was reduced from an estimated 230 h to 4 h per analysis. Surrogate contact modeling can significantly improve the computational speed of dynamic contact and wear simulations of total knee replacements and is appropriate for use in design sensitivity

  13. Testing pairwise association between spatially autocorrelated variables: a new approach using surrogate lattice data.

    Directory of Open Access Journals (Sweden)

    Vincent Deblauwe

    Full Text Available BACKGROUND: Independence between observations is a standard prerequisite of traditional statistical tests of association. This condition is, however, violated when autocorrelation is present within the data. In the case of variables that are regularly sampled in space (i.e. lattice data or images, such as those provided by remote-sensing or geographical databases, this problem is particularly acute. Because analytic derivation of the null probability distribution of the test statistic (e.g. Pearson's r is not always possible when autocorrelation is present, we propose instead the use of a Monte Carlo simulation with surrogate data. METHODOLOGY/PRINCIPAL FINDINGS: The null hypothesis that two observed mapped variables are the result of independent pattern generating processes is tested here by generating sets of random image data while preserving the autocorrelation function of the original images. Surrogates are generated by matching the dual-tree complex wavelet spectra (and hence the autocorrelation functions of white noise images with the spectra of the original images. The generated images can then be used to build the probability distribution function of any statistic of association under the null hypothesis. We demonstrate the validity of a statistical test of association based on these surrogates with both actual and synthetic data and compare it with a corrected parametric test and three existing methods that generate surrogates (randomization, random rotations and shifts, and iterative amplitude adjusted Fourier transform. Type I error control was excellent, even with strong and long-range autocorrelation, which is not the case for alternative methods. CONCLUSIONS/SIGNIFICANCE: The wavelet-based surrogates are particularly appropriate in cases where autocorrelation appears at all scales or is direction-dependent (anisotropy. We explore the potential of the method for association tests involving a lattice of binary data and discuss its

  14. Beyond enhanced recovery?

    DEFF Research Database (Denmark)

    Jørgensen, Christoffer C; Kehlet, Henrik

    2014-01-01

    We read with great interest the special article by Smart and Daniels discussing several important topics of perioperative care, especially regarding lack of consensus on the definition of "postoperative recovery", and need for further understanding of the pathogenic mechanisms. However, we disagr...... that a "new, clearly defined standard of what "recovery" actually is", demands "a look beyond enhanced recovery"(1) for several reasons. This article is protected by copyright. All rights reserved....

  15. Recent Experimental Progress on Surrogate Reactions

    Science.gov (United States)

    Beausang, Cornelius

    2014-09-01

    Reactions on unstable nuclei are important in a wide variety of nuclear physics scenarios. Cross sections for neutron (or light charged particle) induced reactions on target nuclei spanning the chart of the nuclei are important for nuclear astrophysics (r-process, s-process rp- and p-processes etc.), for nuclear energy generation and for national security applications. Many such reactions occur on short-lived unstable nuclei. Even with the present generation of radioactive beam facilities, many such reactions are difficult, if not impossible, to measure directly. For these reactions, often the surrogate reaction technique provides the only option to provide some experimental guidance for the calculations. The experimental and theoretical techniques required are described in some detail in the recent review article by Escher et al.. Originally introduced in the 1970's the last decade has seen a resurgence of interest in the surrogate technique. Various ratio techniques, external, internal and hybrid, have been developed to minimize the effect of target contamination. In the actinide region, a large number of surrogate (n,f) cross sections have been measured. In general, these show agreement to within 5--10%, with directly measured (n,f) data where these data exist (benchmarking), for equivalent neutron energies ranging from ~100 keV up to tens of MeV. For (n, γ) reactions, measurements have been attempted for select nuclei in various mass regions (A ~ 90, 150 and 235) and for these the agreement with directly measured data is less good. The various experimental techniques employed will be described as well as the current state of the experimental data. Some future directions will be described. Reactions on unstable nuclei are important in a wide variety of nuclear physics scenarios. Cross sections for neutron (or light charged particle) induced reactions on target nuclei spanning the chart of the nuclei are important for nuclear astrophysics (r-process, s

  16. Standardized Serum-Free Cryomedia Maintain Peripheral Blood Mononuclear Cell Viability, Recovery, and Antigen-Specific T-Cell Response Compared to Fetal Calf Serum-Based Medium

    Science.gov (United States)

    Schulz, Julia C.; Kemp-Kamke, Beatrice; Zimmermann, Heiko; von Briesen, Hagen

    2011-01-01

    The ability to analyze cryopreserved peripheral blood mononuclear cells (PBMCs) from biobanks for antigen-specific T-cell immunity is necessary to evaluate responses to immune-based therapies. Comprehensive studies have demonstrated that the quality of frozen PBMCs is critical and the maintenance of cell viability and functionality by using appropriate cryopreservation techniques is a key to the successful outcome of assays using PBMCs. Different cryomedia additives affect cell viability. The most common additive is fetal calf serum (FCS), although it is widely known that each FCS lot has to be tested before usage to prevent nonspecific stimulation of T-cells. Also, shipping of samples containing FCS is critical because of many import restrictions. Often, dimethyl sulfoxide (DMSO) is added as a cryoprotectant. However, DMSO concentration has to be reduced significantly because of its toxic effect on cells at room temperature. Therefore, we have developed freezing approaches to minimize cytotoxicity of cryoprotectants and maintain T-cell functionality. We compared different additives to the widely used FCS and found bovine serum albumin fraction V to be an appropriate substitute for the potentially immune-modulating FCS. We also found that DMSO concentration can be reduced by the addition of hydroxyethyl starch. Using our serum-free cryomedia, the PBMC recovery was more than 83% and the PBMC viability was more than 98%. Also, the T-cell functionality measured by enzyme-linked immunospot (ELISpot) was optimal after cryopreservation with our new cryomedia. On the basis of our experimental results, we could finally design 2 different, fully working cryomedia that are standardized, serum free, and manufactured under GMP conditions. PMID:21977240

  17. Comparative Numerical Study of Four Biodiesel Surrogates for Application on Diesel 0D Phenomenological Modeling

    Directory of Open Access Journals (Sweden)

    Claude Valery Ngayihi Abbe

    2016-01-01

    Full Text Available To meet more stringent norms and standards concerning engine performances and emissions, engine manufacturers need to develop new technologies enhancing the nonpolluting properties of the fuels. In that sense, the testing and development of alternative fuels such as biodiesel are of great importance. Fuel testing is nowadays a matter of experimental and numerical work. Researches on diesel engine’s fuel involve the use of surrogates, for which the combustion mechanisms are well known and relatively similar to the investigated fuel. Biodiesel, due to its complex molecular configuration, is still the subject of numerous investigations in that area. This study presents the comparison of four biodiesel surrogates, methyl-butanoate, ethyl-butyrate, methyl-decanoate, and methyl-9-decenoate, in a 0D phenomenological combustion model. They were investigated for in-cylinder pressure, thermal efficiency, and NOx emissions. Experiments were performed on a six-cylinder turbocharged DI diesel engine fuelled by methyl ester (MEB and ethyl ester (EEB biodiesel from wasted frying oil. Results showed that, among the four surrogates, methyl butanoate presented better results for all the studied parameters. In-cylinder pressure and thermal efficiency were predicted with good accuracy by the four surrogates. NOx emissions were well predicted for methyl butanoate but for the other three gave approximation errors over 50%.

  18. Priority wetland invertebrates as conservation surrogates.

    Science.gov (United States)

    Ormerod, S J; Durance, Isabelle; Terrier, Aurelie; Swanson, Alisa M

    2010-04-01

    Invertebrates are important functionally in most ecosystems, but seldom appraised as surrogate indicators of biological diversity. Priority species might be good candidates; thus, here we evaluated whether three freshwater invertebrates listed in the U.K. Biodiversity Action Plan indicated the richness, composition, and conservation importance of associated wetland organisms as defined respectively by their alpha diversity, beta diversity, and threat status. Sites occupied by each of the gastropods Segmentina nitida, Anisus vorticulus, and Valvata macrostoma had greater species richness of gastropods and greater conservation importance than other sites. Each also characterized species assemblages associated with significant variations between locations in alpha or beta diversity among other mollusks and aquatic macrophytes. Because of their distinct resource requirements, conserving the three priority species extended the range of wetland types under management for nature conservation by 18% and the associated gastropod niche-space by around 33%. Although nonpriority species indicated variations in richness, composition, and conservation importance among other organisms as effectively as priority species, none characterized such a wide range of high-quality wetland types. We conclude that priority invertebrates are no more effective than nonpriority species as indicators of alpha and beta diversity or conservation importance among associated organisms. Nevertheless, conserving priority species can extend the array of distinct environments that are protected for their specialized biodiversity and environmental quality. We suggest that this is a key role for priority species and conservation surrogates more generally, and, on our evidence, can best be delivered through multiple species with contrasting habitat requirements.

  19. Estimating Predictability Redundancy and Surrogate Data Method

    CERN Document Server

    Pecen, L

    1995-01-01

    A method for estimating theoretical predictability of time series is presented, based on information-theoretic functionals---redundancies and surrogate data technique. The redundancy, designed for a chosen model and a prediction horizon, evaluates amount of information between a model input (e.g., lagged versions of the series) and a model output (i.e., a series lagged by the prediction horizon from the model input) in number of bits. This value, however, is influenced by a method and precision of redundancy estimation and therefore it is a) normalized by maximum possible redundancy (given by the precision used), and b) compared to the redundancies obtained from two types of the surrogate data in order to obtain reliable classification of a series as either unpredictable or predictable. The type of predictability (linear or nonlinear) and its level can be further evaluated. The method is demonstrated using a numerically generated time series as well as high-frequency foreign exchange data and the theoretical ...

  20. Potential cryptosporidium surrogates and evaluation of compressible oocysts

    Energy Technology Data Exchange (ETDEWEB)

    Li, S.Y.; Goodrich, J.A.; Owens, J.H. [Environmental Protection Agency, Cincinnati, OH (United States)] [and others

    1995-10-01

    Cryptosporidium has been recognized as an important waterborne agent of gastroenteritis and a biological contaminant in drinking water. The widespread presence of Cryptosporidium in surface source water and either untreated or insufficiently treated drinking water has led to Cryptosporidium outbreaks in the United States and worldwide. Among the conventional control practices, filtration and high temperature distillation appear to be the potentially viable technologies for protection against Cryptosporidium in drinking water. As employed in many water plants, filtration is likely to be the most practical treatment technology utilized for Cryptosporidium removal in the near future. Consequently, accurate and reliable methods for evaluation of Cryptosporidium removal rates for filtration-based systems are necessary to assist States in determining drinking water quality and complying with the up-coming national standard for Cryptosporidium in drinking water. Furthermore, searching for reliable and non-hazardous surrogates for evaluation of treatment plant efficiency has been intensified because of the potential health risk associated with Cryptosporidium. Additionally, during the filtration procedure Cryptosporidium may squeeze and fold through pores size of the filtration systems that are smaller than the diameter of the organism; a fraction of these Cryptosporidium oocysts may still remain a certain degree of viability. These uncertainties are critical for the evaluation and optimization of filtration-based physical treatment systems. The in-house research studies described below consist of two parts. One is a potential surrogate study using bag filtration systems at the US EPA Test & Evaluation Facility in Cincinnati, Ohio. The second is Cryptosporidium compressibility and viability investigation.

  1. A Method of Surrogate Model Construction which Leverages Lower-Fidelity Information using Space Mapping Techniques

    Science.gov (United States)

    2014-03-27

    errors found using the polynomial response surrogate (LS PRM ) overlaid on the data from the space-mapped (SM) surrogate...nonlinear space-mapped surrogate responses, with the least-squares PRM surrogate response plotted for comparison . . . . . . . . . . . . . . . . . 65 42...Percent error comparison between the least-squares space-mapping and the PRM surrogate models derived from samples in the second dataset

  2. Surrogate Modeling for Geometry Optimization in Material Design

    DEFF Research Database (Denmark)

    Rojas Larrazabal, Marielba de la Caridad; Abraham, Yonas B.; Holzwarth, Natalie A.W.;

    2007-01-01

    We propose a new approach based on surrogate modeling for geometry optimization in material design. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)......We propose a new approach based on surrogate modeling for geometry optimization in material design. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)...

  3. Human surrogate neck response to +Gz vertical impact

    NARCIS (Netherlands)

    Rooij, L. van; Uittenbogaard, J.

    2011-01-01

    For the evaluation of impact scenarios with a substantial vertical component, the performance of current human surrogates - the RID 3D hardware dummy and two numerical human models - was evaluated. Volunteer tests with 10G and 6G pulses were compared to reconstructed tests with human surrogates.

  4. Term clouds as surrogates for user generated speech

    NARCIS (Netherlands)

    M. Tsagkias; M. Larson; M. de Rijke

    2008-01-01

    User generated spoken audio remains a challenge for Automatic Speech Recognition (ASR) technology and content-based audio surrogates derived from ASR-transcripts must be error robust. An investigation of the use of term clouds as surrogates for podcasts demonstrates that ASR term clouds closely appr

  5. INTEC SBW Solid Sludge Surrogate Recipe and Validation

    Energy Technology Data Exchange (ETDEWEB)

    Maio, Vince; Janikowski, Stuart; Johnson, Jim; Maio, Vince; Pao, Jenn-Hai

    2004-06-01

    A nonhazardous INTEC tank farm sludge surrogate that incorporated metathesis reactions to generate solids from solutions of known elements present in the radioactive INTEC tank farm sodium-bearing waste sludges was formulated. Elemental analyses, physical property analyses, and filtration testing were performed on waste surrogate and tank farm waste samples, and the results were compared. For testing physical systems associated with moving the tank farm solids, the surrogate described in this report is the best currently available choice. No other available surrogate exhibits the noted similarities in behavior to the sludges. The chemical morphology, particle size distribution, and settling and flow characteristics of the surrogate were similar to those exhibited by the waste sludges. Nonetheless, there is a difference in chemical makeup of the surrogate and the tank farm waste. If a chemical treatment process were to be evaluated for final treatment and disposition of the waste sludges, the surrogate synthesis process would likely require modification to yield a surrogate with a closer matching chemical composition.

  6. Inactivation of Tulane virus, a novel surrogate for human norovirus

    Science.gov (United States)

    Human noroviruses (HuNoVs) are the major cause of non-bacterial epidemics of gastroenteritis. Due to the inability to cultivate HuNoVs and the lack of an efficient small animal model, surrogates are used to study HuNoV biology. Two such surrogates, the feline calicivirus (FCV) and the murine norovir...

  7. Human surrogate neck response to +Gz vertical impact

    NARCIS (Netherlands)

    Rooij, L. van; Uittenbogaard, J.

    2011-01-01

    For the evaluation of impact scenarios with a substantial vertical component, the performance of current human surrogates - the RID 3D hardware dummy and two numerical human models - was evaluated. Volunteer tests with 10G and 6G pulses were compared to reconstructed tests with human surrogates. Add

  8. Space Mapping Optimization of Microwave Circuits Exploiting Surrogate Models

    DEFF Research Database (Denmark)

    Bakr, M. H.; Bandler, J. W.; Madsen, Kaj

    2000-01-01

    A powerful new space-mapping (SM) optimization algorithm is presented in this paper. It draws upon recent developments in both surrogate model-based optimization and modeling of microwave devices, SM optimization is formulated as a general optimization problem of a surrogate model. This model...

  9. Preclinical and human surrogate models of itch

    DEFF Research Database (Denmark)

    Hoeck, Emil August; Marker, Jens Broch; Gazerani, Parisa;

    2016-01-01

    Pruritus, or simply itch, is a debilitating symptom that significantly decreases the quality of life in a wide range of clinical conditions. While histamine remains the most studied mediator of itch in humans, treatment options for chronic itch, in particular antihistamine-resistant itch, are lim...... currently applied in animals and humans. This article is protected by copyright. All rights reserved.......Pruritus, or simply itch, is a debilitating symptom that significantly decreases the quality of life in a wide range of clinical conditions. While histamine remains the most studied mediator of itch in humans, treatment options for chronic itch, in particular antihistamine-resistant itch......, are limited. Relevant preclinical and human surrogate models of non-histaminergic itch are needed to accelerate the development of novel antipruritics and diagnostic tools. Advances in basic itch research have facilitated the development of diverse models of itch and associated dysesthesiae. While...

  10. Surrogates of plutonium for detection equipment testing

    Science.gov (United States)

    Peerani, Paolo; Tomanin, Alice

    2011-10-01

    Fight against illicit trafficking of nuclear material relies on the possibility to detect nuclear material concealed in vehicles, people or cargo containers. This is done by equipping and training law enforcement and security staff in border stations or other points of access to strategic places and critical infrastructures with radiation detection equipment. The design, development, testing and evaluation of these instruments ideally require the use of real nuclear material to assess, verify and certify their detection performance. Availability of special nuclear material may be an issue, especially for industry, since only few specialized laboratories are licensed for such material. This paper tries to analyse and describe the possibility to use suitable surrogates that may replace the use of real nuclear material in testing the detection capabilities of instruments used in nuclear security.

  11. [Surrogate maternity--literature review and practice].

    Science.gov (United States)

    Pilka, L; Rumpík, D; Pilka, R; Koudelka, M; Prudil, L

    2009-04-01

    This review summarizes opinions on surrogacy including internatinal and governmental organizations attitudes, as well as some religious concerns. Literature review. Reprofit International, Brno, Reproductive medicine and gynecology centre, Zlin, Department of obstetrics and gynecology, Palacky University, Olomouc. The developments in the field of assissted reproduction during the last twenty years have attracted unexpected public interest in some of its ethical and moral aspects. It is very difficult to find a uniform attitude to ethical concerns of assisted conception in plural society. Surrogate mother is defined as a woman who bears and relinquishes a child for another person. The european congress on human reproduction in Barcelona 2008 adopted following résumé on surrogacy: Public opinion has shifted to a position where surrogacy is recognized as an appropriate response to infertility in some circumstances and it is to be expected that this approach will be further strenghtened with stress on positive aspects of familiar life.

  12. Tractable Experiment Design via Mathematical Surrogates

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Brian J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-02-29

    This presentation summarizes the development and implementation of quantitative design criteria motivated by targeted inference objectives for identifying new, potentially expensive computational or physical experiments. The first application is concerned with estimating features of quantities of interest arising from complex computational models, such as quantiles or failure probabilities. A sequential strategy is proposed for iterative refinement of the importance distributions used to efficiently sample the uncertain inputs to the computational model. In the second application, effective use of mathematical surrogates is investigated to help alleviate the analytical and numerical intractability often associated with Bayesian experiment design. This approach allows for the incorporation of prior information into the design process without the need for gross simplification of the design criterion. Illustrative examples of both design problems will be presented as an argument for the relevance of these research problems.

  13. Revisiting photodynamic therapy dosimetry: reductionist & surrogate approaches to facilitate clinical success

    Science.gov (United States)

    Pogue, Brian W.; Elliott, Jonathan T.; Kanick, Stephen C.; Davis, Scott C.; Samkoe, Kimberley S.; Maytin, Edward V.; Pereira, Stephen P.; Hasan, Tayyaba

    2016-04-01

    Photodynamic therapy (PDT) can be a highly complex treatment, with many parameters influencing treatment efficacy. The extent to which dosimetry is used to monitor and standardize treatment delivery varies widely, ranging from measurement of a single surrogate marker to comprehensive approaches that aim to measure or estimate as many relevant parameters as possible. Today, most clinical PDT treatments are still administered with little more than application of a prescribed drug dose and timed light delivery, and thus the role of patient-specific dosimetry has not reached widespread clinical adoption. This disconnect is at least partly due to the inherent conflict between the need to measure and understand multiple parameters in vivo in order to optimize treatment, and the need for expedience in the clinic and in the regulatory and commercialization process. Thus, a methodical approach to selecting primary dosimetry metrics is required at each stage of translation of a treatment procedure, moving from complex measurements to understand PDT mechanisms in pre-clinical and early phase I trials, towards the identification and application of essential dose-limiting and/or surrogate measurements in phase II/III trials. If successful, identifying the essential and/or reliable surrogate dosimetry measurements should help facilitate increased adoption of clinical PDT. In this paper, examples of essential dosimetry points and surrogate dosimetry tools that may be implemented in phase II/III trials are discussed. For example, the treatment efficacy as limited by light penetration in interstitial PDT may be predicted by the amount of contrast uptake in CT, and so this could be utilized as a surrogate dosimetry measurement to prescribe light doses based upon pre-treatment contrast. Success of clinical ALA-based skin lesion treatment is predicted almost uniquely by the explicit or implicit measurements of photosensitizer and photobleaching, yet the individualization of treatment

  14. Revisiting photodynamic therapy dosimetry: reductionist & surrogate approaches to facilitate clinical success.

    Science.gov (United States)

    Pogue, Brian W; Elliott, Jonathan T; Kanick, Stephen C; Davis, Scott C; Samkoe, Kimberley S; Maytin, Edward V; Pereira, Stephen P; Hasan, Tayyaba

    2016-04-01

    Photodynamic therapy (PDT) can be a highly complex treatment, with many parameters influencing treatment efficacy. The extent to which dosimetry is used to monitor and standardize treatment delivery varies widely, ranging from measurement of a single surrogate marker to comprehensive approaches that aim to measure or estimate as many relevant parameters as possible. Today, most clinical PDT treatments are still administered with little more than application of a prescribed drug dose and timed light delivery, and thus the role of patient-specific dosimetry has not reached widespread clinical adoption. This disconnect is at least partly due to the inherent conflict between the need to measure and understand multiple parameters in vivo in order to optimize treatment, and the need for expedience in the clinic and in the regulatory and commercialization process. Thus, a methodical approach to selecting primary dosimetry metrics is required at each stage of translation of a treatment procedure, moving from complex measurements to understand PDT mechanisms in pre-clinical and early phase I trials, towards the identification and application of essential dose-limiting and/or surrogate measurements in phase II/III trials. If successful, identifying the essential and/or reliable surrogate dosimetry measurements should help facilitate increased adoption of clinical PDT. In this paper, examples of essential dosimetry points and surrogate dosimetry tools that may be implemented in phase II/III trials are discussed. For example, the treatment efficacy as limited by light penetration in interstitial PDT may be predicted by the amount of contrast uptake in CT, and so this could be utilized as a surrogate dosimetry measurement to prescribe light doses based upon pre-treatment contrast. Success of clinical ALA-based skin lesion treatment is predicted almost uniquely by the explicit or implicit measurements of photosensitizer and photobleaching, yet the individualization of treatment

  15. Sheet metal forming optimization by using surrogate modeling techniques

    Science.gov (United States)

    Wang, Hu; Ye, Fan; Chen, Lei; Li, Enying

    2017-01-01

    Surrogate assisted optimization has been widely applied in sheet metal forming design due to its efficiency. Therefore, to improve the efficiency of design and reduce the product development cycle, it is important for scholars and engineers to have some insight into the performance of each surrogate assisted optimization method and make them more flexible practically. For this purpose, the state-of-the-art surrogate assisted optimizations are investigated. Furthermore, in view of the bottleneck and development of the surrogate assisted optimization and sheet metal forming design, some important issues on the surrogate assisted optimization in support of the sheet metal forming design are analyzed and discussed, involving the description of the sheet metal forming design, off-line and online sampling strategies, space mapping algorithm, high dimensional problems, robust design, some challenges and potential feasible methods. Generally, this paper provides insightful observations into the performance and potential development of these methods in sheet metal forming design.

  16. Environmental diversity as a surrogate for species representation.

    Science.gov (United States)

    Beier, Paul; de Albuquerque, Fábio Suzart

    2015-10-01

    Because many species have not been described and most species ranges have not been mapped, conservation planners often use surrogates for conservation planning, but evidence for surrogate effectiveness is weak. Surrogates are well-mapped features such as soil types, landforms, occurrences of an easily observed taxon (discrete surrogates), and well-mapped environmental conditions (continuous surrogate). In the context of reserve selection, the idea is that a set of sites selected to span diversity in the surrogate will efficiently represent most species. Environmental diversity (ED) is a rarely used surrogate that selects sites to efficiently span multivariate ordination space. Because it selects across continuous environmental space, ED should perform better than discrete surrogates (which necessarily ignore within-bin and between-bin heterogeneity). Despite this theoretical advantage, ED appears to have performed poorly in previous tests of its ability to identify 50 × 50 km cells that represented vertebrates in Western Europe. Using an improved implementation of ED, we retested ED on Western European birds, mammals, reptiles, amphibians, and combined terrestrial vertebrates. We also tested ED on data sets for plants of Zimbabwe, birds of Spain, and birds of Arizona (United States). Sites selected using ED represented European mammals no better than randomly selected cells, but they represented species in the other 7 data sets with 20% to 84% effectiveness. This far exceeds the performance in previous tests of ED, and exceeds the performance of most discrete surrogates. We believe ED performed poorly in previous tests because those tests considered only a few candidate explanatory variables and used suboptimal forms of ED's selection algorithm. We suggest future work on ED focus on analyses at finer grain sizes more relevant to conservation decisions, explore the effect of selecting the explanatory variables most associated with species turnover, and investigate

  17. A stable isotope-labeled internal standard is essential for correcting for the interindividual variability in the recovery of lapatinib from cancer patient plasma in quantitative LC-MS/MS analysis.

    Science.gov (United States)

    Wu, Jianmei; Wiegand, Richard; LoRusso, Patricia; Li, Jing

    2013-12-15

    The development and validation of a LC-MS/MS method is often performed using pooled human plasma, which may fail to account for variations in interindividual matrices. Since calibrator standards and quality control samples are routinely prepared in pooled human plasma, variations in the extraction recovery and/or matrix effect between pooled plasma and individual patient plasma can cause erroneous measurements. Using both pooled human plasma as well as individual healthy donor and cancer patient plasma samples, we evaluated the analytical performance of two classes of internal standards (i.e., non-isotope-labeled and isotope-labeled) in the quantitative LC-MS/MS analysis of lapatinib. After exhaustive extraction with organic solvent, the recovery of lapatinib, a highly plasma protein-bound drug, varied up to 2.4-fold (range, 29-70%) in 6 different donors of plasma and varied up to 3.5-fold (range, 16-56%) in the pretreatment plasma samples from 6 cancer patients. No apparent matrix effects were observed for lapatinib in both pooled and individual donor or patient plasma samples. The calibration curve range was 5-5000ng/ml of lapatinib in plasma. Both the non-isotope-labeled (zileuton) and isotope-labeled (lapatinib-d3) internal standard methods showed acceptable specificity, accuracy (within 100±10%), and precision (internal standard could correct for the interindividual variability in the recovery of lapatinib from patient plasma samples. As inter- and intra-patient matrix variability is commonly presented in the clinical setting, this study provides an example underscoring the importance of using a stable isotope-labeled internal standard in quantitative LC-MS/MS analysis for therapeutic drug monitoring or pharmacokinetic evaluation. Copyright © 2013 Elsevier B.V. All rights reserved.

  18. Spatial network surrogates for disentangling complex system structure from spatial embedding of nodes

    CERN Document Server

    Wiedermann, Marc; Kurths, Jürgen; Donner, Reik V

    2015-01-01

    Networks with nodes embedded in a metric space have gained increasing interest in recent years. The effects of spatial embedding on the networks' structural characteristics, however, are rarely taken into account when studying their macroscopic properties. Here, we propose a hierarchy of null models to generate random surrogates from a given spatially embedded network that can preserve global and local statistics associated with the nodes' embedding in a metric space. Comparing the original network's and the resulting surrogates' global characteristics allows to quantify to what extent these characteristics are already predetermined by the spatial embedding of the nodes and links. We apply our framework to various real-world spatial networks and show that the proposed models capture macroscopic properties of the networks under study much better than standard random network models that do not account for the nodes' spatial embedding. Depending on the actual performance of the proposed null models, the networks...

  19. Surrogate motherhood as a medical treatment procedure for women's infertility.

    Science.gov (United States)

    Jovic, Olga S

    2011-03-01

    The content of this work is conceived on the research of the consequences of surrogate motherhood as a process of assisted procreation, which represent a way of parenthood in cases when it is not possible to realize parenthood through a natural way. Surrogate motherhood is a process in which a woman (surrogate mother) agrees to carry a pregnancy with the intent to give the child to the couple with whom she has made a contract on surrogate maternity after the birth. This process of conception and birth makes the determination of the child's origin on its mother's side hard to determine, because of the distinction of the genetic and gestation phases of the two women. The concept of surrogate motherhood is to appear in two forms, depending on the existence or the non-existence of the genetic link between the surrogate mother and the child she gives birth to. There are gestation (full) and genetic (partial) surrogates each with different modalities and legal and ethical implications. In Serbia, Infertility Treatment and the Bio-medically Assisted Procreation Act from 2009 explicitly forbids surrogate motherhood, despite the fact that an infertile couple decides to use it, as a rule, after having tried all other treatment procedures, in cases when there is a diagnosis but the conventional treatment applied has not produced the desired results. Given the fact that no one has the right to ignore the sufferings of people who cannot procreate naturally, the medical practice and legal science in our country plead for a formulation of a legal framework in which to apply surrogate motherhood as an infertility treatment, under particular conditions.

  20. 我国塑料废弃物回收和再循环及其标准化的现状%Actuality of Recovery and Recycling of Plastics Waste and Standardization of China

    Institute of Scientific and Technical Information of China (English)

    赵平; 张鼎晟子; 刘力荣; 陈敏剑

    2011-01-01

    This article described the overview of recovery and recycling of plastics waste, and the system of the legislative statute and standardization of China. Additionally discussed the problems of recovery and recycling of plastics waste in China by comparing them with oversea.%介绍了我国塑料废弃物回收和再循环的基本情况以及相关法规和标准化体系,并通过对比国外塑料废弃物回收和再循环的基本情况和标准化体系,探讨了我国塑料废弃物回收和再循环目前存在的问题.

  1. Mother-daughter in vitro fertilization triplet surrogate pregnancy.

    Science.gov (United States)

    Michelow, M C; Bernstein, J; Jacobson, M J; McLoughlin, J L; Rubenstein, D; Hacking, A I; Preddy, S; Van der Wat, I J

    1988-02-01

    A successful triplet pregnancy has been established in a surrogate gestational mother following the transfer of five embryos fertilized in vitro. The oocytes were donated by her biological daughter, and the sperm obtained from the daughter's husband. The daughter's infertility followed a total abdominal hysterectomy performed for a postpartum hemorrhage as a result of a placenta accreta. Synchronization of both their menstrual cycles was obtained using oral contraceptive suppression for 2 months, followed by stimulation of both the surrogate gestational mother and her daughter such that embryo transfer would occur at least 48 hr after the surrogate gestational mother's own ovulation. This case raises a number of medical, social, psychological, and ethical issues.

  2. SURROGATE MOTHER DALAM PERSPEKTIF HUKUM PIDANA INDONESIA

    Directory of Open Access Journals (Sweden)

    Mr. Muntaha

    2013-04-01

    Full Text Available The development of science and technology, in particular in the field of health, has already recently brought a huge advantage and problem in human life. An example of technological marvel that not only requires deep legal thoughts but also at the same time solution is the bio-medical technology advancement of surrogacy. Surrogacy deals with human’s inclination towards reproductive activity. However, it opens up legal complication, in particular with regards to the potential commission of a criminal action as well as to the notion of doctor’s liability. Perkembangan ilmu dan teknologi di bidang kesehatan yang semakin maju dan pesat telah membawa berbagai manfaat dan masalah dalam kehidupan manusia dewasa ini. Salah satu perkembangan yang tidak hanya membutuhkan pemikiran di bidang hukum, tetapi juga sekaligus solusinya adalah mengenai kecanggihan teknologi bio-medis surrogate mother. Surrogacy menyentuh sisi kemanusiaan seorang insan terhadap reproduksi. Akan tetapi, lembaga surrogacy juga membawa komplikasi hukum terutama terkait dengan potensi tindak pidana dan dengan persoalan tanggung jawab dokter.

  3. Polynomial Chaos Surrogates for Bayesian Inference

    KAUST Repository

    Le Maitre, Olivier

    2016-01-06

    The Bayesian inference is a popular probabilistic method to solve inverse problems, such as the identification of field parameter in a PDE model. The inference rely on the Bayes rule to update the prior density of the sought field, from observations, and derive its posterior distribution. In most cases the posterior distribution has no explicit form and has to be sampled, for instance using a Markov-Chain Monte Carlo method. In practice the prior field parameter is decomposed and truncated (e.g. by means of Karhunen- Lo´eve decomposition) to recast the inference problem into the inference of a finite number of coordinates. Although proved effective in many situations, the Bayesian inference as sketched above faces several difficulties requiring improvements. First, sampling the posterior can be a extremely costly task as it requires multiple resolutions of the PDE model for different values of the field parameter. Second, when the observations are not very much informative, the inferred parameter field can highly depends on its prior which can be somehow arbitrary. These issues have motivated the introduction of reduced modeling or surrogates for the (approximate) determination of the parametrized PDE solution and hyperparameters in the description of the prior field. Our contribution focuses on recent developments in these two directions: the acceleration of the posterior sampling by means of Polynomial Chaos expansions and the efficient treatment of parametrized covariance functions for the prior field. We also discuss the possibility of making such approach adaptive to further improve its efficiency.

  4. A Large-Scale Study of Surrogate Physicality and Gesturing on Human–Surrogate Interactions in a Public Space

    Directory of Open Access Journals (Sweden)

    Kangsoo Kim

    2017-07-01

    Full Text Available Technological human surrogates, including robotic and virtual humans, have been popularly used in various scenarios, including training, education, and entertainment. Prior research has investigated the effects of the surrogate’s physicality and gesturing in human perceptions and social influence of the surrogate. However, those studies have been carried out in research laboratories, where the participants were aware that it was an experiment, and the participant demographics are typically relatively narrow—e.g., college students. In this paper, we describe and share results from a large-scale exploratory user study involving 7,685 people in a public space, where they were unaware of the experimental nature of the setting, to investigate the effects of surrogate physicality and gesturing on their behavior during human–surrogate interactions. We evaluate human behaviors using several variables, such as proactivity and reactivity, and proximity. We have identified several interesting phenomena that could lead to hypotheses developed as part of future hypothesis-based studies. Based on the measurements of the variables, we believe people are more likely to be engaged in a human–surrogate interaction when the surrogate is physically present, but movements and gesturing with its body parts have not shown the expected benefits for the interaction engagement. Regarding the demographics of the people in the study, we found higher overall engagement for females than males, and higher reactivity for younger than older people. We discuss implications for practitioners aiming to design a technological surrogate that will directly interact with real humans.

  5. Laboratory Testing of Waste Isolation Pilot Plant Surrogate Waste Materials

    Science.gov (United States)

    Broome, S.; Bronowski, D.; Pfeifle, T.; Herrick, C. G.

    2011-12-01

    The Waste Isolation Pilot Plant (WIPP) is a U.S. Department of Energy geological repository for the permanent disposal of defense-related transuranic (TRU) waste. The waste is emplaced in rooms excavated in the bedded Salado salt formation at a depth of 655 m below the ground surface. After emplacement of the waste, the repository will be sealed and decommissioned. WIPP Performance Assessment modeling of the underground material response requires a full and accurate understanding of coupled mechanical, hydrological, and geochemical processes and how they evolve with time. This study was part of a broader test program focused on room closure, specifically the compaction behavior of waste and the constitutive relations to model this behavior. The goal of this study was to develop an improved waste constitutive model. The model parameters are developed based on a well designed set of test data. The constitutive model will then be used to realistically model evolution of the underground and to better understand the impacts on repository performance. The present study results are focused on laboratory testing of surrogate waste materials. The surrogate wastes correspond to a conservative estimate of the degraded containers and TRU waste materials after the 10,000 year regulatory period. Testing consists of hydrostatic, uniaxial, and triaxial tests performed on surrogate waste recipes that were previously developed by Hansen et al. (1997). These recipes can be divided into materials that simulate 50% and 100% degraded waste by weight. The percent degradation indicates the anticipated amount of iron corrosion, as well as the decomposition of cellulosics, plastics, and rubbers. Axial, lateral, and volumetric strain and axial and lateral stress measurements were made. Two unique testing techniques were developed during the course of the experimental program. The first involves the use of dilatometry to measure sample volumetric strain under a hydrostatic condition. Bulk

  6. Hepatology may have problems with putative surrogate outcome measures

    DEFF Research Database (Denmark)

    Gluud, Christian; Brok, Jesper; Gong, Yan;

    2007-01-01

    hepatitis C, serum bilirubin concentration following ursodeoxycholic acid or immunosuppressants for patients with primary biliary cirrhosis, and nutritional outcomes following artificial nutrition for liver patients may not be valid surrogates for morbidity or mortality. The challenge is to develop reliable...

  7. Fernald Silos 1 & 2 Accelerated Waste Retrieval Program Surrogate Development

    Energy Technology Data Exchange (ETDEWEB)

    Mullen, O Dennis; Erian, Fadel F.

    2002-09-01

    Whitepaper describing the rationale and methodology for development of surrogates to be used for testing retrieval and processing systems for the DOE Fernald Silos 1 & 2 wastes. One significant updating/revision is expected.

  8. THE SURROGATE COLONIZATION OF PALESTINE, 1917-1939

    OpenAIRE

    Atran, Scott

    1989-01-01

    The "surrogate colonization" of Palestine had a foreign power giving to a nonnative group rights over land occupied by an indigenous people. It thus brought into play the complementary and conflicting agendas of three culturally distinguishable parties: British, Jews and Arabs. Each party had both "externalist" [those with no sustained practical experience of day to day life in Palestine] and "internalist" representatives. The surrogate idea was based on a "strategic consensus" involving each...

  9. Surrogate nutrition markers, malnutrition, and adequacy of nutrition support.

    Science.gov (United States)

    Seres, David S

    2005-06-01

    Surrogate nutrition markers are used to assess adequacy of nourishment and to define malnutrition despite evidence that fails to link nourishment, surrogate markers, and outcomes. Markers such as serum levels of albumin, prealbumin, transferrin, and IGF-1 and delayed hypersensitivity and total lymphocyte count may be valid to help stratify risk. However, it is not appropriate to consider these as markers of adequacy of nourishment in the sick patient.

  10. Emotional experiences in surrogate mothers: A qualitative study

    OpenAIRE

    Hoda Ahmari Tehran; Shohreh Tashi; Nahid Mehran; Narges Eskandari; Tahmineh Dadkhah Tehrani

    2014-01-01

    Background: Surrogacy is one of the new techniques of assisted reproduction technology in which a woman carries and bears a child for another woman. In Iran, many Shia clerics and jurists considered it permissible so there is no religious prohibition for it. In addition to the risk of physical complications for complete surrogate mothers, the possibility of psychological complications resulted from emotional attachment to a living creature in the surrogate mother as another injury requires co...

  11. Human surrogate models of neuropathic pain: validity and limitations.

    Science.gov (United States)

    Binder, Andreas

    2016-02-01

    Human surrogate models of neuropathic pain in healthy subjects are used to study symptoms, signs, and the hypothesized underlying mechanisms. Although different models are available, different spontaneous and evoked symptoms and signs are inducible; 2 key questions need to be answered: are human surrogate models conceptually valid, ie, do they share the sensory phenotype of neuropathic pain states, and are they sufficiently reliable to allow consistent translational research?

  12. Magnetometer Response of Commonly Found Munitions Items and Munitions Surrogates

    Science.gov (United States)

    2012-01-12

    Predicted minimum magnetometer anomaly strength for a variety of munitions and surrogate items at a burial depth corresponding to 11x their respective...Response Live Site Demonstrations. The authors would like to thank Craig Murray of Parsons and Stephen Billings of Sky Research for their...variety of munitions and surrogate items at a burial depth corresponding to 11x their respective diameter. The sensor is assumed to be deployed as part

  13. Constructing Surrogate Models of Complex Systems with Enhanced Sparsity: Quantifying the influence of conformational uncertainty in biomolecular solvation

    Energy Technology Data Exchange (ETDEWEB)

    Lei, Huan; Yang, Xiu; Zheng, Bin; Baker, Nathan A.

    2015-11-05

    Biomolecules exhibit conformational fluctuations near equilibrium states, inducing uncertainty in various biological properties in a dynamic way. We have developed a general method to quantify the uncertainty of target properties induced by conformational fluctuations. Using a generalized polynomial chaos (gPC) expansion, we construct a surrogate model of the target property with respect to varying conformational states. We also propose a method to increase the sparsity of the gPC expansion by defining a set of conformational “active space” random variables. With the increased sparsity, we employ the compressive sensing method to accurately construct the surrogate model. We demonstrate the performance of the surrogate model by evaluating fluctuation-induced uncertainty in solvent-accessible surface area for the bovine trypsin inhibitor protein system and show that the new approach offers more accurate statistical information than standard Monte Carlo approaches. Further more, the constructed surrogate model also enables us to directly evaluate the target property under various conformational states, yielding a more accurate response surface than standard sparse grid collocation methods. In particular, the new method provides higher accuracy in high-dimensional systems, such as biomolecules, where sparse grid performance is limited by the accuracy of the computed quantity of interest. Our new framework is generalizable and can be used to investigate the uncertainty of a wide variety of target properties in biomolecular systems.

  14. Limitations in dose-response and surrogate species methodologies for risk assessment of Cry toxins on arthropod natural enemies.

    Science.gov (United States)

    Paula, Débora P; Andow, David A; Bellinati, André; Timbó, Renata Velozo; Souza, Lucas M; Pires, Carmen S S; Sujii, Edison R

    2016-04-01

    Dose-response assays and surrogate species are standard methods for risk analysis for environmental chemicals. These assume that individuals within a species have unimodal responses and that a surrogate species can predict responses of other related taxa. We exposed immature individuals of closely related aphidophagous coccinellid predators, Cycloneda sanguinea and Harmonia axyridis, to Cry1Ac and Cry1F toxins through uniform and constant artificial tritrophic exposure through Myzus persicae aphids. Both toxins were detected in coccinellid pupae, with individual and interspecific variation. Uptake was significantly higher in H. axyridis than in C. sanguinea, both in the proportion of individuals and the concentrations per individual. We also observed bimodal uptake of the Cry toxins by H. axyridis, which indicated that some individuals had low bioaccumulation and some had high bioaccumulation. This suggests that standard dose-response assays need to be interpreted with caution and future assays should examine the modality of the responses. In addition, the similarity in the biological effects of the Cry toxins in the two predators was due to different biological exposure mechanisms. The majority of H. axyridis were exposed both internally and in the gut, while C. sanguinea was exposed primarily in the gut. Thus, despite their close phylogenetic relatedness, these species would not be good surrogates for each other and the surrogate species methodology should be tested more rigorously.

  15. Financial Surrogate Decision Making: Lessons from Applied Experimental Philosophy.

    Science.gov (United States)

    Feltz, Adam

    2016-09-20

    An estimated 1 in 4 elderly Americans need a surrogate to make decisions at least once in their lives. With an aging population, that number is almost certainly going to increase. This paper focuses on financial surrogate decision making. To illustrate some of the empirical and moral implications associated with financial surrogate decision making, two experiments suggest that default choice settings can predictably influence some surrogate financial decision making. Experiment 1 suggested that when making hypothetical financial decisions, surrogates tended to stay with default settings (OR = 4.37, 95% CI 1.52, 12.48). Experiment 2 replicated and extended this finding suggesting that in a different context (OR = 2.27, 95% CI 1.1, 4.65). Experiment 2 also suggested that those who were more numerate were less likely to be influenced by default settings than the less numerate, but only when the decision is whether to "opt in" (p = .05). These data highlight the importance of a recent debate about "nudging." Defaults are common methods to nudge people to make desirable choices while allowing the liberty to choose otherwise. Some of the ethics of using default settings to nudge surrogate decision makers are discussed.

  16. Reliability-based design optimization with progressive surrogate models

    Science.gov (United States)

    Kanakasabai, Pugazhendhi; Dhingra, Anoop K.

    2014-12-01

    Reliability-based design optimization (RBDO) has traditionally been solved as a nested (bilevel) optimization problem, which is a computationally expensive approach. Unilevel and decoupled approaches for solving the RBDO problem have also been suggested in the past to improve the computational efficiency. However, these approaches also require a large number of response evaluations during optimization. To alleviate the computational burden, surrogate models have been used for reliability evaluation. These approaches involve construction of surrogate models for the reliability computation at each point visited by the optimizer in the design variable space. In this article, a novel approach to solving the RBDO problem is proposed based on a progressive sensitivity surrogate model. The sensitivity surrogate models are built in the design variable space outside the optimization loop using the kriging method or the moving least squares (MLS) method based on sample points generated from low-discrepancy sampling (LDS) to estimate the most probable point of failure (MPP). During the iterative deterministic optimization, the MPP is estimated from the surrogate model for each design point visited by the optimizer. The surrogate sensitivity model is also progressively updated for each new iteration of deterministic optimization by adding new points and their responses. Four example problems are presented showing the relative merits of the kriging and MLS approaches and the overall accuracy and improved efficiency of the proposed approach.

  17. Incidence of Changes in Respiration-Induced Tumor Motion and Its Relationship With Respiratory Surrogates During Individual Treatment Fractions

    Energy Technology Data Exchange (ETDEWEB)

    Malinowski, Kathleen [Department of Bioengineering, A. James Clark School of Engineering, University of Maryland, College Park, MD (United States); Department of Radiation Oncology, University of Maryland School of Medicine, Baltimore, MD (United States); McAvoy, Thomas J. [Department of Bioengineering, A. James Clark School of Engineering, University of Maryland, College Park, MD (United States); Institute of Systems Research, University of Maryland, College Park, MD (United States); George, Rohini [Department of Bioengineering, A. James Clark School of Engineering, University of Maryland, College Park, MD (United States); Dietrich, Sonja [Department of Radiation Oncology, Stanford University School of Medicine, Palo Alto, CA (United States); D' Souza, Warren D., E-mail: wdsou001@umaryland.edu [Department of Bioengineering, A. James Clark School of Engineering, University of Maryland, College Park, MD (United States); Department of Radiation Oncology, University of Maryland School of Medicine, Baltimore, MD (United States)

    2012-04-01

    Purpose: To determine how frequently (1) tumor motion and (2) the spatial relationship between tumor and respiratory surrogate markers change during a treatment fraction in lung and pancreas cancer patients. Methods and Materials: A Cyberknife Synchrony system radiographically localized the tumor and simultaneously tracked three respiratory surrogate markers fixed to a form-fitting vest. Data in 55 lung and 29 pancreas fractions were divided into successive 10-min blocks. Mean tumor positions and tumor position distributions were compared across 10-min blocks of data. Treatment margins were calculated from both 10 and 30 min of data. Partial least squares (PLS) regression models of tumor positions as a function of external surrogate marker positions were created from the first 10 min of data in each fraction; the incidence of significant PLS model degradation was used to assess changes in the spatial relationship between tumors and surrogate markers. Results: The absolute change in mean tumor position from first to third 10-min blocks was >5 mm in 13% and 7% of lung and pancreas cases, respectively. Superior-inferior and medial-lateral differences in mean tumor position were significantly associated with the lobe of lung. In 61% and 54% of lung and pancreas fractions, respectively, margins calculated from 30 min of data were larger than margins calculated from 10 min of data. The change in treatment margin magnitude for superior-inferior motion was >1 mm in 42% of lung and 45% of pancreas fractions. Significantly increasing tumor position prediction model error (mean {+-} standard deviation rates of change of 1.6 {+-} 2.5 mm per 10 min) over 30 min indicated tumor-surrogate relationship changes in 63% of fractions. Conclusions: Both tumor motion and the relationship between tumor and respiratory surrogate displacements change in most treatment fractions for patient in-room time of 30 min.

  18. Beyond multi-fractals: surrogate time series and fields

    Science.gov (United States)

    Venema, V.; Simmer, C.

    2007-12-01

    Most natural complex are characterised by variability on a large range of temporal and spatial scales. The two main methodologies to generate such structures are Fourier/FARIMA based algorithms and multifractal methods. The former is restricted to Gaussian data, whereas the latter requires the structure to be self-similar. This work will present so-called surrogate data as an alternative that works with any (empirical) distribution and power spectrum. The best-known surrogate algorithm is the iterative amplitude adjusted Fourier transform (IAAFT) algorithm. We have studied six different geophysical time series (two clouds, runoff of a small and a large river, temperature and rain) and their surrogates. The power spectra and consequently the 2nd order structure functions were replicated accurately. Even the fourth order structure function was more accurately reproduced by the surrogates as would be possible by a fractal method, because the measured structure deviated too strong from fractal scaling. Only in case of the daily rain sums a fractal method could have been more accurate. Just as Fourier and multifractal methods, the current surrogates are not able to model the asymmetric increment distributions observed for runoff, i.e., they cannot reproduce nonlinear dynamical processes that are asymmetric in time. Furthermore, we have found differences for the structure functions on small scales. Surrogate methods are especially valuable for empirical studies, because the time series and fields that are generated are able to mimic measured variables accurately. Our main application is radiative transfer through structured clouds. Like many geophysical fields, clouds can only be sampled sparsely, e.g. with in-situ airborne instruments. However, for radiative transfer calculations we need full 3-dimensional cloud fields. A first study relating the measured properties of the cloud droplets and the radiative properties of the cloud field by generating surrogate cloud

  19. Surrogate Modeling of Deformable Joint Contact using Artificial Neural Networks

    Science.gov (United States)

    Eskinazi, Ilan; Fregly, Benjamin J.

    2016-01-01

    Deformable joint contact models can be used to estimate loading conditions for cartilage-cartilage, implant-implant, human-orthotic, and foot-ground interactions. However, contact evaluations are often so expensive computationally that they can be prohibitive for simulations or optimizations requiring thousands or even millions of contact evaluations. To overcome this limitation, we developed a novel surrogate contact modeling method based on artificial neural networks (ANNs). The method uses special sampling techniques to gather input-output data points from an original (slow) contact model in multiple domains of input space, where each domain represents a different physical situation likely to be encountered. For each contact force and torque output by the original contact model, a multi-layer feed-forward ANN is defined, trained, and incorporated into a surrogate contact model. As an evaluation problem, we created an ANN-based surrogate contact model of an artificial tibiofemoral joint using over 75,000 evaluations of a fine-grid elastic foundation (EF) contact model. The surrogate contact model computed contact forces and torques about 1000 times faster than a less accurate coarse grid EF contact model. Furthermore, the surrogate contact model was seven times more accurate than the coarse grid EF contact model within the input domain of a walking motion. For larger input domains, the surrogate contact model showed the expected trend of increasing error with increasing domain size. In addition, the surrogate contact model was able to identify out-of-contact situations with high accuracy. Computational contact models created using our proposed ANN approach may remove an important computational bottleneck from musculoskeletal simulations or optimizations incorporating deformable joint contact models. PMID:26220591

  20. 40 CFR 63.7293 - What work practice standards must I meet for fugitive pushing emissions if I have a non-recovery...

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 13 2010-07-01 2010-07-01 false What work practice standards must I... open space above the coke bed and that there is an unobstructed view of the door on the opposite side... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED)...

  1. Surrogate test for noise-contaminated dynamics in the Duffing oscillator

    Energy Technology Data Exchange (ETDEWEB)

    Gan Chunbiao [Institute of Applied Mechanics, SAA, Zhejiang University, Hangzhou 310027 (China)], E-mail: cb_gan@zju.edu.cn; He Shimin [College of Mechanical and Energy Engineering, Zhejiang University, Hangzhou 310027 (China)

    2008-12-15

    To identify random signals from nonlinear system under stochastic background is very difficult, and standard dynamical methods are generally not applicable. The pseudo-periodic surrogate algorithm recently developed by Small is introduced to test the sample time series in the Duffing oscillator under the Gaussian white noise excitation. The correlation dimensions of the noisy periodic, noise-induced chaotic and random-dominant responses of the system are compared with their corresponding artificial data respectively. Meanwhile, the leading Lyapunov exponents by Rosenstein's algorithm are also presented to validate the identification idea on the system's sample time series.

  2. Backup & Recovery

    CERN Document Server

    Preston, W

    2009-01-01

    Packed with practical, freely available backup and recovery solutions for Unix, Linux, Windows, and Mac OS X systems -- as well as various databases -- this new guide is a complete overhaul of Unix Backup & Recovery by the same author, now revised and expanded with over 75% new material.

  3. Recovery Online

    Science.gov (United States)

    Clark, John R.

    2007-01-01

    Since the founding of Alcoholics Anonymous (AA) in 1935, programs offering opportunity for recovery from alcoholism and other addictions have undergone vast changes. The Internet has created nearly limitless opportunities for recovering people and those seeking recovery to find both meetings and places where they can gather virtually and discuss…

  4. Biodegradation of naphthenic acid surrogates by axenic cultures.

    Science.gov (United States)

    Yue, Siqing; Ramsay, Bruce A; Ramsay, Juliana A

    2015-07-01

    This is the first study to report that bacteria from the genera Ochrobactrum, Brevundimonas and Bacillus can be isolated by growth on naphthenic acids (NAs) extracted from oil sands process water (OSPW). These pure cultures were screened for their ability to use a range of aliphatic, cyclic and aromatic NA surrogates in 96-well microtiter plates using water-soluble tetrazolium redox dyes (Biolog Redox Dye H) as the indicator of metabolic activity. Of the three cultures, Ochrobactrum showed most metabolic activity on the widest range of NA surrogates. Brevundomonas and especially Ochrobactrum had higher metabolic activity on polycyclic aromatic compounds than other classes of NA surrogates. Bacillus also oxidized a wide range of NA surrogates but not as well as Ochrobactrum. Using this method to characterize NA utilisation, one can identify which NAs or NA classes in OSPW are more readily degraded. Since aromatic NAs have been shown to have an estrogenic effect and polycyclic monoaromatic compounds have been suggested to pose the greatest environmental threat among the NAs, these bacterial genera may play an important role in detoxification of OSPW. Furthermore, this study demonstrates that bacteria belonging to the genera Ochrobactrum and Bacillus can also degrade surrogates of tricyclic NAs.

  5. Searching for Dynamical Earthquake Precursors with Surrogate Data

    Science.gov (United States)

    Lynch, J.; Revenaugh, J.; Georgopoulos, A.

    2007-12-01

    Surrogate data methods are resampling techniques related to the modern statistical bootstrap. The nonlinear dynamics community has promoted surrogate data as a useful tool for establishing the presence of nonlinear dynamics in experimental observations before applying more specific techniques such as nonlinear prediction. We propose to use surrogate data tests to search for evidence of transient nonlinear dynamics in seismographic data that act as a proxy for earthquake triggering mechanisms, such as fluid flow in the fault zone, failure cascades and slow prefatory slip, that signal changes in the coupling between geological boundaries. We will analyze the vertical component of broadband seismographic data recorded at 20Hz by the CI network of approximately 100 stations located throughout Southern California. We will focus on a period of six hours prior to seismic events of magnitude 4-5 located inside the CI network. Each seismographic record will be scanned for short, non-overlapping segments that pass a moderate stationarity criterion. We will then apply surrogate tests to each qualifying segment using three discriminating statistics: time reversal asymmetry, delay vector variance and zeroth-order nonlinear prediction error. We will correlate the results with known seismic activity and examine the spatial and temporal distribution of the surrogate test results for potential dynamical earthquake precursors.

  6. Decontamination options for Bacillus anthracis-contaminated drinking water determined from spore surrogate studies.

    Science.gov (United States)

    Raber, Ellen; Burklund, Alison

    2010-10-01

    Five parameters were evaluated with surrogates of Bacillus anthracis spores to determine effective decontamination alternatives for use in a contaminated drinking water supply. The parameters were as follows: (i) type of Bacillus spore surrogate (B. thuringiensis or B. atrophaeus), (ii) spore concentration in suspension (10(2) and 10(6) spores/ml), (iii) chemical characteristics of the decontaminant (sodium dichloro-S-triazinetrione dihydrate [Dichlor], hydrogen peroxide, potassium peroxymonosulfate [Oxone], sodium hypochlorite, and VirkonS), (iv) decontaminant concentration (0.01% to 5%), and (v) exposure time to decontaminant (10 min to 1 h). Results from 138 suspension tests with appropriate controls are reported. Hydrogen peroxide at a concentration of 5% and Dichlor or sodium hypochlorite at a concentration of 2% were highly effective at spore inactivation regardless of spore type tested, spore exposure time, or spore concentration evaluated. This is the first reported study of Dichlor as an effective decontaminant for B. anthracis spore surrogates. Dichlor's desirable characteristics of high oxidation potential, high level of free chlorine, and a more neutral pH than that of other oxidizers evaluated appear to make it an excellent alternative. All three oxidizers were effective against B. atrophaeus spores in meeting the EPA biocide standard of greater than a 6-log kill after a 10-min exposure time and at lower concentrations than typically reported for biocide use. Solutions of 5% VirkonS and Oxone were less effective as decontaminants than other options evaluated in this study and did not meet the EPA's efficacy standard for a biocide, although they were found to be as effective for concentrations of 10(2) spores/ml. Differences in methods and procedures reported by other investigators make quantitative comparisons among studies difficult.

  7. Multivariate regression approaches for surrogate-based diffeomorphic estimation of respiratory motion in radiation therapy

    Science.gov (United States)

    Wilms, M.; Werner, R.; Ehrhardt, J.; Schmidt-Richberg, A.; Schlemmer, H.-P.; Handels, H.

    2014-03-01

    Breathing-induced location uncertainties of internal structures are still a relevant issue in the radiation therapy of thoracic and abdominal tumours. Motion compensation approaches like gating or tumour tracking are usually driven by low-dimensional breathing signals, which are acquired in real-time during the treatment. These signals are only surrogates of the internal motion of target structures and organs at risk, and, consequently, appropriate models are needed to establish correspondence between the acquired signals and the sought internal motion patterns. In this work, we present a diffeomorphic framework for correspondence modelling based on the Log-Euclidean framework and multivariate regression. Within the framework, we systematically compare standard and subspace regression approaches (principal component regression, partial least squares, canonical correlation analysis) for different types of common breathing signals (1D: spirometry, abdominal belt, diaphragm tracking; multi-dimensional: skin surface tracking). Experiments are based on 4D CT and 4D MRI data sets and cover intra- and inter-cycle as well as intra- and inter-session motion variations. Only small differences in internal motion estimation accuracy are observed between the 1D surrogates. Increasing the surrogate dimensionality, however, improved the accuracy significantly; this is shown for both 2D signals, which consist of a common 1D signal and its time derivative, and high-dimensional signals containing the motion of many skin surface points. Eventually, comparing the standard and subspace regression variants when applied to the high-dimensional breathing signals, only small differences in terms of motion estimation accuracy are found.

  8. Using a surrogate contact pair to evaluate polyethylene wear in prosthetic knee joints.

    Science.gov (United States)

    Sanders, Anthony P; Lockard, Carly A; Weisenburger, Joel N; Haider, Hani; Raeymaekers, Bart

    2016-01-01

    With recent improvements to the properties of ultra-high molecular weight polyethylene (UHMWPE) used in joint replacements, prosthetic knee and hip longevity may extend beyond two decades. However, it is difficult and costly to replicate such a long in vivo lifetime using clinically relevant in vitro wear testing approaches such as walking gait joint simulators. We advance a wear test intermediate in complexity between pin-on-disk and knee joint simulator tests. The test uses a surrogate contact pair, consisting of a surrogate femoral and tibial specimen that replicate the contact mechanics of any full-scale knee condyle contact pair. The method is implemented in a standard multi-directional pin-on-disk wear test machine, and we demonstrate its application via a two-million-cycle wear test of three different UHMWPE formulations. Further, we demonstrate the use of digital photography and image processing to accurately quantify fatigue damage based on the reduced transmission of light through a damage area in a UHMWPE specimen. The surrogate contact pairs replicate the knee condyle contact areas within -3% to +12%. The gravimetric wear test results reflect the dose of crosslinking radiation applied to the UHMWPE: 35 kGy yielded a wear rate of 7.4 mg/Mcycles, 55 kGy yielded 1.0 mg/Mcycles, and 75 kGy (applied to a 0.1% vitamin E stabilized UHMWPE) yielded 1.5 mg/Mcycles. A precursor to spalling fatigue is observed and precisely measured in the radiation-sterilized (35 kGy) and aged UHMWPE specimen. The presented techniques can be used to evaluate the high-cycle fatigue performance of arbitrary knee condyle contact pairs under design-specific contact stresses, using existing wear test machines. This makes the techniques more economical and well-suited to standardized comparative testing.

  9. Surrogate modeling for initial rotational stiffness of welded tubular joints

    Directory of Open Access Journals (Sweden)

    M.R. Garifullin

    2016-10-01

    Full Text Available Recently, buildings and structures erected in Russia and abroad have to comply with stringent economic requirements. Buildings should not only be reliable and safe, have a beautiful architectural design, but also meet the criteria of rationality and energy efficiency. In practice, this usually means the need for additional comparative analysis in order to determine the optimal solution to the engineering task. Usually such an analysis is time-consuming and requires huge computational efforts. In this regard, surrogate modeling can be an effective tool for solving such problems. This article provides a brief description of surrogate models and the basic techniques of their construction, describes the construction process of a surrogate model to calculate initial rotational stiffness of welded RHS joints made of high strength steel (HSS.

  10. Disinfection byproduct regulatory compliance surrogates and bromide-associated risk.

    Science.gov (United States)

    Kolb, Chelsea; Francis, Royce A; VanBriesen, Jeanne M

    2017-08-01

    Natural and anthropogenic factors can alter bromide concentrations in drinking water sources. Increasing source water bromide concentrations increases the formation and alters the speciation of disinfection byproducts (DBPs) formed during drinking water treatment. Brominated DBPs are more toxic than their chlorinated analogs, and thus have a greater impact on human health. However, DBPs are regulated based on the mass sum of DBPs within a given class (e.g., trihalomethanes and haloacetic acids), not based on species-specific risk or extent of bromine incorporation. The regulated surrogate measures are intended to protect against not only the species they directly represent, but also against unregulated DBPs that are not routinely measured. Surrogates that do not incorporate effects of increasing bromide may not adequately capture human health risk associated with drinking water when source water bromide is elevated. The present study analyzes trihalomethanes (THMs), measured as TTHM, with varying source water bromide concentrations, and assesses its correlation with brominated THM, TTHM risk and species-specific THM concentrations and associated risk. Alternative potential surrogates are evaluated to assess their ability to capture THM risk under different source water bromide concentration conditions. The results of the present study indicate that TTHM does not adequately capture risk of the regulated species when source water bromide concentrations are elevated, and thus would also likely be an inadequate surrogate for many unregulated brominated species. Alternative surrogate measures, including THM3 and the bromodichloromethane concentration, are more robust surrogates for species-specific THM risk at varying source water bromide concentrations. Copyright © 2017. Published by Elsevier B.V.

  11. Optimization using surrogate models - by the space mapping technique

    DEFF Research Database (Denmark)

    Søndergaard, Jacob

    2003-01-01

    mapping surrogate has a lower approximation error for long steps. For short steps, however, the Taylor model of the expensive model is best, due to exact interpolation at the model origin. Five algorithms for space mapping optimization are presented and the numerical performance is evaluated. Three...... conditions are satisfied. So hybrid methods, combining the space mapping technique with classical optimization methods, should be used if convergence to high accuracy is wanted. Approximation abilities of the space mapping surrogate are compared with those of a Taylor model of the expensive model. The space...

  12. Optimization using surrogate models - by the space mapping technique

    DEFF Research Database (Denmark)

    Søndergaard, Jacob

    2003-01-01

    mapping surrogate has a lower approximation error for long steps. For short steps, however, the Taylor model of the expensive model is best, due to exact interpolation at the model origin. Five algorithms for space mapping optimization are presented and the numerical performance is evaluated. Three...... conditions are satisfied. So hybrid methods, combining the space mapping technique with classical optimization methods, should be used if convergence to high accuracy is wanted. Approximation abilities of the space mapping surrogate are compared with those of a Taylor model of the expensive model. The space...

  13. An Artificial Turf-Based Surrogate Surface Collector for the Direct Measurement of Atmospheric Mercury Dry Deposition

    Directory of Open Access Journals (Sweden)

    Naima L. Hall

    2017-02-01

    Full Text Available This paper describes the development of a new artificial turf surrogate surface (ATSS sampler for use in the measurement of mercury (Hg dry deposition. In contrast to many existing surrogate surface designs, the ATSS utilizes a three-dimensional deposition surface that may more closely mimic the physical structure of many natural surfaces than traditional flat surrogate surface designs (water, filter, greased Mylar film. The ATSS has been designed to overcome several complicating factors that can impact the integrity of samples with other direct measurement approaches by providing a passive system which can be deployed for both short and extended periods of time (days to weeks, and is not contaminated by precipitation and/or invalidated by strong winds. Performance characteristics including collocated precision, in-field procedural and laboratory blanks were evaluated. The results of these performance evaluations included a mean collocated precision of 9%, low blanks (0.8 ng, high extraction efficiency (97%–103%, and a quantitative matrix spike recovery (100%.

  14. An Artificial Turf-Based Surrogate Surface Collector for the Direct Measurement of Atmospheric Mercury Dry Deposition

    Science.gov (United States)

    Hall, Naima L.; Dvonch, Joseph Timothy; Marsik, Frank J.; Barres, James A.; Landis, Matthew S.

    2017-01-01

    This paper describes the development of a new artificial turf surrogate surface (ATSS) sampler for use in the measurement of mercury (Hg) dry deposition. In contrast to many existing surrogate surface designs, the ATSS utilizes a three-dimensional deposition surface that may more closely mimic the physical structure of many natural surfaces than traditional flat surrogate surface designs (water, filter, greased Mylar film). The ATSS has been designed to overcome several complicating factors that can impact the integrity of samples with other direct measurement approaches by providing a passive system which can be deployed for both short and extended periods of time (days to weeks), and is not contaminated by precipitation and/or invalidated by strong winds. Performance characteristics including collocated precision, in-field procedural and laboratory blanks were evaluated. The results of these performance evaluations included a mean collocated precision of 9%, low blanks (0.8 ng), high extraction efficiency (97%–103%), and a quantitative matrix spike recovery (100%). PMID:28208603

  15. Comparison of surrogate and direct measurement of insulin resistance in chronic hepatitis C virus infection: impact of obesity and ethnicity.

    Science.gov (United States)

    Lam, Khoa D; Bacchetti, Peter; Abbasi, Fahim; Ayala, Claudia E; Loeb, Samuel M; Shah, Vidhi; Wen, Michael J; Reaven, Gerald M; Maher, Jacquelyn J; Khalili, Mandana

    2010-07-01

    Studies using surrogate estimates show high prevalence of insulin resistance in hepatitis C infection. This study prospectively evaluated the correlation between surrogate and directly measured estimates of insulin resistance and the impact of obesity and ethnicity on this relationship. Eighty-six nondiabetic, noncirrhotic patients with hepatitis C virus (age = 48 +/- 7 years, 74% male, 44% white, 22% African American, 26% Latino, 70% genotype 1) were categorized into normal-weight (body mass index [BMI] or = 30, n = 18). Insulin-mediated glucose uptake was measured by steady-state plasma glucose (SSPG) concentration during a 240-minute insulin suppression test. Surrogate estimates included: fasting glucose and insulin, glucose/insulin, homeostasis model assessment (HOMA-IR), quantitative insulin sensitivity check index (QUICKI), insulin (I-AUC) and glucose (G-AUC) area under the curve during oral glucose tolerance test, and the Belfiore and Stumvoll indexes. All surrogate estimates correlated with SSPG, but the magnitude of correlation varied (r = 0.30-0.64). The correlation coefficients were highest in the obese. I-AUC had the highest correlation among all ethnic and weight groups (r = 0.57-0.77). HOMA-IR accounted for only 15% of variability in SSPG in the normal weight group. The common HOMA-IR cutoff of resistance had high misclassification rates especially in the overweight group independent of ethnicity. HOMA-IR > 4 had the lowest misclassification rate (75% sensitivity, 88% specificity). Repeat HOMA-IR measurements had higher within-person variation in the obese (standard deviation = 0.77 higher than normal-weight, 95% confidence interval = 0.25-1.30, P = 0.005). Because of limitations of surrogate estimates, caution should be used in interpreting data evaluating insulin resistance especially in nonobese, nondiabetic patients with HCV.

  16. Disaster Debris Recovery Database - Recovery

    Data.gov (United States)

    U.S. Environmental Protection Agency — The US EPA Region 5 Disaster Debris Recovery Database includes public datasets of over 6,000 composting facilities, demolition contractors, transfer stations,...

  17. Frequency response as a surrogate eigenvalue problem in topology optimization

    DEFF Research Database (Denmark)

    Andreassen, Erik; Ferrari, Federico; Sigmund, Ole

    2017-01-01

    This article discusses the use of frequency response surrogates for eigenvalue optimization problems in topology optimization that may be used to avoid solving the eigenvalue problem. The motivation is to avoid complications that arise from multiple eigenvalues and the computational complexity as...

  18. GENERATING SOPHISTICATED SPATIAL SURROGATES USING THE MIMS SPATIAL ALLOCATOR

    Science.gov (United States)

    The Multimedia Integrated Modeling System (MIMS) Spatial Allocator is open-source software for generating spatial surrogates for emissions modeling, changing the map projection of Shapefiles, and performing other types of spatial allocation that does not require the use of a comm...

  19. Strength Reliability Analysis of Turbine Blade Using Surrogate Models

    Directory of Open Access Journals (Sweden)

    Wei Duan

    2014-05-01

    Full Text Available There are many stochastic parameters that have an effect on the reliability of steam turbine blades performance in practical operation. In order to improve the reliability of blade design, it is necessary to take these stochastic parameters into account. In this study, a variable cross-section twisted blade is investigated and geometrical parameters, material parameters and load parameters are considered as random variables. A reliability analysis method as a combination of a Finite Element Method (FEM, a surrogate model and Monte Carlo Simulation (MCS, is applied to solve the blade reliability analysis. Based on the blade finite element parametrical model and the experimental design, two kinds of surrogate models, Polynomial Response Surface (PRS and Artificial Neural Network (ANN, are applied to construct the approximation analytical expressions between the blade responses (including maximum stress and deflection and random input variables, which act as a surrogate of finite element solver to drastically reduce the number of simulations required. Then the surrogate is used for most of the samples needed in the Monte Carlo method and the statistical parameters and cumulative distribution functions of the maximum stress and deflection are obtained by Monte Carlo simulation. Finally, the probabilistic sensitivities analysis, which combines the magnitude of the gradient and the width of the scatter range of the random input variables, is applied to evaluate how much the maximum stress and deflection of the blade are influenced by the random nature of input parameters.

  20. Recent Progress in the Development of Diesel Surrogate Fuels

    Energy Technology Data Exchange (ETDEWEB)

    Pitz, W J

    2009-09-04

    There has been much recent progress in the area of surrogate fuels for diesel. In the last few years, experiments and modeling have been performed on higher molecular weight components of relevance to diesel fuel such as n-hexadecane (n-cetane) and 2,2,4,4,6,8,8-heptamethylnonane (iso-cetane). Chemical kinetic models have been developed for all the n-alkanes up to 16 carbon atoms. Also, there has been much experimental and modeling work on lower molecular weight surrogate components such as n-decane and do-decane which are most relevant to jet fuel surrogates, but are also relevant to diesel surrogates where simulation of the full boiling point range is desired. For the cycloalkanes, experimental work on decalin and tetralin recently has been published. For multi-component surrogate fuel mixtures, recent work on modeling of these mixtures and comparisons to real diesel fuel is reviewed. Detailed chemical kinetic models for surrogate fuels are very large in size. Significant progress also has been made in improving the mechanism reduction tools that are needed to make these large models practicable in multidimensional reacting flow simulations of diesel combustion. Nevertheless, major research gaps remain. In the case of iso-alkanes, there are experiments and modeling work on only one of relevance to diesel: iso-cetane. Also, the iso-alkanes in diesel are lightly branched and no detailed chemical kinetic models or experimental investigations are available for such compounds. More components are needed to fill out the iso-alkane boiling point range. For the aromatic class of compounds, there has been no new work for compounds in the boiling point range of diesel. Most of the new work has been on alkyl aromatics that are of the range C7 to C8, below the C10 to C20 range that is needed. For the chemical class of cycloalkanes, experiments and modeling on higher molecular weight components are warranted. Finally for multi-component surrogates needed to treat real diesel

  1. Recent Progress in the Development of Diesel Surrogate Fuels

    Energy Technology Data Exchange (ETDEWEB)

    Pitz, W J; Mueller, C J

    2009-12-09

    There has been much recent progress in the area of surrogate fuels for diesel. In the last few years, experiments and modeling have been performed on higher molecular weight components of relevance to diesel fuel such as n-hexadecane (n-cetane) and 2,2,4,4,6,8,8-heptamethylnonane (iso-cetane). Chemical kinetic models have been developed for all the n-alkanes up to 16 carbon atoms. Also, there has been much experimental and modeling work on lower molecular weight surrogate components such as n-decane and n-dodecane that are most relevant to jet fuel surrogates, but are also relevant to diesel surrogates where simulation of the full boiling point range is desired. For two-ring compounds, experimental work on decalin and tetralin recently has been published. For multi-component surrogate fuel mixtures, recent work on modeling of these mixtures and comparisons to real diesel fuel is reviewed. Detailed chemical kinetic models for surrogate fuels are very large in size. Significant progress also has been made in improving the mechanism reduction tools that are needed to make these large models practicable in multi-dimensional reacting flow simulations of diesel combustion. Nevertheless, major research gaps remain. In the case of iso-alkanes, there are experiments and modeling work on only one of relevance to diesel: iso-cetane. Also, the iso-alkanes in diesel are lightly branched and no detailed chemical kinetic models or experimental investigations are available for such compounds. More components are needed to fill out the iso-alkane boiling point range. For the aromatic class of compounds, there has been no new work for compounds in the boiling point range of diesel. Most of the new work has been on alkyl aromatics that are of the range C7 to C8, below the C10 to C20 range that is needed. For the chemical class of cycloalkanes, experiments and modeling on higher molecular weight components are warranted. Finally for multi-component surrogates needed to treat real

  2. Development of a Human Cranial Bone Surrogate for Impact Studies.

    Science.gov (United States)

    Roberts, Jack C; Merkle, Andrew C; Carneal, Catherine M; Voo, Liming M; Johannes, Matthew S; Paulson, Jeff M; Tankard, Sara; Uy, O Manny

    2013-01-01

    In order to replicate the fracture behavior of the intact human skull under impact it becomes necessary to develop a material having the mechanical properties of cranial bone. The most important properties to replicate in a surrogate human skull were found to be the fracture toughness and tensile strength of the cranial tables as well as the bending strength of the three-layer (inner table-diplöe-outer table) architecture of the human skull. The materials selected to represent the surrogate cranial tables consisted of two different epoxy resins systems with random milled glass fiber to enhance the strength and stiffness and the materials to represent the surrogate diplöe consisted of three low density foams. Forty-one three-point bending fracture toughness tests were performed on nine material combinations. The materials that best represented the fracture toughness of cranial tables were then selected and formed into tensile samples and tested. These materials were then used with the two surrogate diplöe foam materials to create the three-layer surrogate cranial bone samples for three-point bending tests. Drop tower tests were performed on flat samples created from these materials and the fracture patterns were very similar to the linear fractures in pendulum impacts of intact human skulls, previously reported in the literature. The surrogate cranial tables had the quasi-static fracture toughness and tensile strength of 2.5 MPa√ m and 53 ± 4.9 MPa, respectively, while the same properties of human compact bone were 3.1 ± 1.8 MPa√ m and 68 ± 18 MPa, respectively. The cranial surrogate had a quasi-static bending strength of 68 ± 5.7 MPa, while that of cranial bone was 82 ± 26 MPa. This material/design is currently being used to construct spherical shell samples for drop tower and ballistic tests.

  3. Isotope Inversion Experiment evaluating the suitability of calibration in surrogate matrix for quantification via LC-MS/MS-Exemplary application for a steroid multi-method.

    Science.gov (United States)

    Suhr, Anna Catharina; Vogeser, Michael; Grimm, Stefanie H

    2016-05-30

    For quotable quantitative analysis of endogenous analytes in complex biological samples by isotope dilution LC-MS/MS, the creation of appropriate calibrators is a challenge, since analyte-free authentic material is in general not available. Thus, surrogate matrices are often used to prepare calibrators and controls. However, currently employed validation protocols do not include specific experiments to verify the suitability of a surrogate matrix calibration for quantification of authentic matrix samples. The aim of the study was the development of a novel validation experiment to test whether surrogate matrix based calibrators enable correct quantification of authentic matrix samples. The key element of the novel validation experiment is the inversion of nonlabelled analytes and their stable isotope labelled (SIL) counterparts in respect to their functions, i.e. SIL compound is the analyte and nonlabelled substance is employed as internal standard. As a consequence, both surrogate and authentic matrix are analyte-free regarding SIL analytes, which allows a comparison of both matrices. We called this approach Isotope Inversion Experiment. As figure of merit we defined the accuracy of inverse quality controls in authentic matrix quantified by means of a surrogate matrix calibration curve. As a proof-of-concept application a LC-MS/MS assay addressing six corticosteroids (cortisol, cortisone, corticosterone, 11-deoxycortisol, 11-deoxycorticosterone, and 17-OH-progesterone) was chosen. The integration of the Isotope Inversion Experiment in the validation protocol for the steroid assay was successfully realized. The accuracy results of the inverse quality controls were all in all very satisfying. As a consequence the suitability of a surrogate matrix calibration for quantification of the targeted steroids in human serum as authentic matrix could be successfully demonstrated. The Isotope Inversion Experiment fills a gap in the validation process for LC-MS/MS assays

  4. Product Recovery From Hemlock "Pulpwood" From Alaska.

    Science.gov (United States)

    Thomas D. Fahey

    1983-01-01

    A total of 363 western hemlock (Tsuga heterophylla (Raf.) Sarg.) logs from Alaska were sawn to compare recovery at a stud mill and at a dimension mill. Recovery at both mills varied by log diameters and by log scaling system. Lumber grade recovery was primarily in Stud grade at the stud mill and in Standard and Construction grade at the dimension...

  5. Hall et al., 2016 Artificial Turf Surrogate Surface Methods Paper Data File

    Data.gov (United States)

    U.S. Environmental Protection Agency — Mercury dry deposition data quantified via static water surrogate surface (SWSS) and artificial turf surrogate surface (ATSS) collectors. This dataset is associated...

  6. Is Diaphragm Motion a Good Surrogate for Liver Tumor Motion?

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Juan [Department of Radiation Oncology, Duke University Medical Center, Durham, North Carolina (United States); School of Information Science and Engineering, Shandong University, Jinan, Shandong (China); Cai, Jing [Department of Radiation Oncology, Duke University Medical Center, Durham, North Carolina (United States); Wang, Hongjun [School of Information Science and Engineering, Shandong University, Jinan, Shandong (China); Chang, Zheng; Czito, Brian G. [Department of Radiation Oncology, Duke University Medical Center, Durham, North Carolina (United States); Bashir, Mustafa R. [Department of Radiology, Duke University Medical Center, Durham, North Carolina (United States); Palta, Manisha [Department of Radiation Oncology, Duke University Medical Center, Durham, North Carolina (United States); Yin, Fang-Fang, E-mail: fangfang.yin@duke.edu [Department of Radiation Oncology, Duke University Medical Center, Durham, North Carolina (United States)

    2014-11-15

    Purpose: To evaluate the relationship between liver tumor motion and diaphragm motion. Methods and Materials: Fourteen patients with hepatocellular carcinoma (10 of 14) or liver metastases (4 of 14) undergoing radiation therapy were included in this study. All patients underwent single-slice cine–magnetic resonance imaging simulations across the center of the tumor in 3 orthogonal planes. Tumor and diaphragm motion trajectories in the superior–inferior (SI), anterior–posterior (AP), and medial–lateral (ML) directions were obtained using an in-house-developed normalized cross-correlation–based tracking technique. Agreement between the tumor and diaphragm motion was assessed by calculating phase difference percentage, intraclass correlation coefficient, and Bland-Altman analysis (Diff). The distance between the tumor and tracked diaphragm area was analyzed to understand its impact on the correlation between the 2 motions. Results: Of all patients, the mean (±standard deviation) phase difference percentage values were 7.1% ± 1.1%, 4.5% ± 0.5%, and 17.5% ± 4.5% in the SI, AP, and ML directions, respectively. The mean intraclass correlation coefficient values were 0.98 ± 0.02, 0.97 ± 0.02, and 0.08 ± 0.06 in the SI, AP, and ML directions, respectively. The mean Diff values were 2.8 ± 1.4 mm, 2.4 ± 1.1 mm, and 2.2 ± 0.5 mm in the SI, AP, and ML directions, respectively. Tumor and diaphragm motions had high concordance when the distance between the tumor and tracked diaphragm area was small. Conclusions: This study showed that liver tumor motion had good correlation with diaphragm motion in the SI and AP directions, indicating diaphragm motion in the SI and AP directions could potentially be used as a reliable surrogate for liver tumor motion.

  7. Recovery Spirituality

    Directory of Open Access Journals (Sweden)

    Ernest Kurtz

    2015-01-01

    Full Text Available There is growing interest in Alcoholics Anonymous (A.A. and other secular, spiritual, and religious frameworks of long-term addiction recovery. The present paper explores the varieties of spiritual experience within A.A., with particular reference to the growth of a wing of recovery spirituality promoted within A.A. It is suggested that the essence of secular spirituality is reflected in the experience of beyond (horizontal and vertical transcendence and between (connection and mutuality and in six facets of spirituality (Release, Gratitude, Humility, Tolerance, Forgiveness, and a Sense of Being-at-home shared across religious, spiritual, and secular pathways of addiction recovery. The growing varieties of A.A. spirituality (spanning the “Christianizers” and “Seculizers” reflect A.A.’s adaptation to the larger diversification of religious experience and the growing secularization of spirituality across the cultural contexts within which A.A. is nested.

  8. Sequential optimization of strip bending process using multiquadric radial basis function surrogate models

    NARCIS (Netherlands)

    Havinga, Gosse Tjipke; van den Boogaard, Antonius H.; Klaseboer, G.

    2013-01-01

    Surrogate models are used within the sequential optimization strategy for forming processes. A sequential improvement (SI) scheme is used to refine the surrogate model in the optimal region. One of the popular surrogate modeling methods for SI is Kriging. However, the global response of Kriging mode

  9. AKRO: Standard Prices

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Standard prices are generated for cost recovery programs in the Individual Fishing Quota (IFQ) halibut and sablefish, BSAI Rationalized crab, and Central Gulf of...

  10. Spontaneous Recovery

    Science.gov (United States)

    Rescorla, Robert A.

    2004-01-01

    Spontaneous recovery from extinction is one of the most basic phenomena of Pavlovian conditioning. Although it can be studied by using a variety of designs, some procedures are better than others for identifying the involvement of underlying learning processes. A wide range of different learning mechanisms has been suggested as being engaged by…

  11. The potential of pigeons as surrogate observers in medical image perception studies

    Science.gov (United States)

    Krupinski, Elizabeth A.; Levenson, Richard M.; Navarro, Victor; Wasserman, Edward A.

    2016-03-01

    Assessment of medical image quality and how changes in image appearance impact performance are critical but assessment can be expensive and time-consuming. Could an animal (pigeon) observer with well-known visual skills and documented ability to distinguish complex visual stimuli serve as a surrogate for the human observer? Using sets of whole slide pathology (WSI) and mammographic images we trained pigeons (cohorts of 4) to detect and/or classify lesions in medical images. Standard training methods were used. A chamber equipped with a 15' display with a resistive touchscreen was used to display the images and record responses (pecks). Pigeon pellets were dispensed for correct responses. The pigeons readily learned to distinguish benign from malignant breast cancer histopathology in WSI (mean % correct responses rose 50% to 85% over 15 days) and generalized readily from 4X to 10X and 20X magnifications; to detect microcalcifications (mean % correct responses rose 50% to over 85% over 25 days); to distinguish benign from malignant breast masses (3 of 4 birds learned this task to around 80% and 60% over 10 days); and ignore compression artifacts in WSI (performance with uncompressed slides averaged 95% correct; 15:1 and 27:1 compression slides averaged 92% and 90% correct). Pigeons models may help us better understand medical image perception and may be useful in quality assessment by serving as surrogate observers for certain types of studies.

  12. Spatial network surrogates for disentangling complex system structure from spatial embedding of nodes

    Science.gov (United States)

    Wiedermann, Marc; Donges, Jonathan F.; Kurths, Jürgen; Donner, Reik V.

    2016-04-01

    Networks with nodes embedded in a metric space have gained increasing interest in recent years. The effects of spatial embedding on the networks' structural characteristics, however, are rarely taken into account when studying their macroscopic properties. Here, we propose a hierarchy of null models to generate random surrogates from a given spatially embedded network that can preserve certain global and local statistics associated with the nodes' embedding in a metric space. Comparing the original network's and the resulting surrogates' global characteristics allows one to quantify to what extent these characteristics are already predetermined by the spatial embedding of the nodes and links. We apply our framework to various real-world spatial networks and show that the proposed models capture macroscopic properties of the networks under study much better than standard random network models that do not account for the nodes' spatial embedding. Depending on the actual performance of the proposed null models, the networks are categorized into different classes. Since many real-world complex networks are in fact spatial networks, the proposed approach is relevant for disentangling the underlying complex system structure from spatial embedding of nodes in many fields, ranging from social systems over infrastructure and neurophysiology to climatology.

  13. Tailoring molecularly imprinted polymer beads for alternariol recognition and analysis by a screening with mycotoxin surrogates.

    Science.gov (United States)

    Abou-Hany, Rahma A G; Urraca, Javier L; Descalzo, Ana B; Gómez-Arribas, Lidia N; Moreno-Bondi, María C; Orellana, Guillermo

    2015-12-18

    Molecularly imprinted porous polymer microspheres have been prepared for selective binding of alternariol (AOH), a phenolic mycotoxin produced by Alternaria fungi. In order to lead the synthesis of recognition materials, four original AOH surrogates have been designed, prepared and characterized. They bear different number of phenol groups in various positions and different degree of O-methylation on the dibenzo[b,d]pyran-6-one skeleton. A comprehensive library of mixtures of basic, acidic or neutral monomers, with divinylbenzene or ethyleneglycol dimethacrylate as cross-linkers, were polymerized at a small scale in the presence of the four molecular mimics of the toxin molecule. This polymer screening has allowed selection of the optimal composition of the microbeads (N-(2-aminoethyl)methacrylamide, EAMA, and ethylene glycol dimethacrylate). The latter are able to bind AOH in water-acetonitrile (80:20, v/v) with an affinity constant of 109±10mM(-1) and a total number of binding sites of 35±2μmolg(-1), being alternariol monomethylether the only competitor species. Moreover, (1)H NMR titrations have unveiled a 1:2 surrogate-to-EAMA stoichiometry, the exact interaction sites and a binding constant of 1.5×10(4)M(-2). A molecularly imprinted solid phase extraction (MISPE) method has been optimized for selective isolation of the mycotoxin from aqueous samples upon a discriminating wash with 3mL of acetonitrile/water (20:80, v/v) followed by determination by HPLC with fluorescence detection. The method has been applied, in combination to ultrasound-assisted extraction, to the analysis of AOH in tomato samples fortified with the mycotoxin at five concentration levels (33-110μgkg(-1)), with recoveries in the range of 81-103% (RSD n=6). To the best of our knowledge, this is the first imprinted material capable of molecularly recognizing this widespread food contaminant.

  14. Very Short Literature Survey From Supervised Learning To Surrogate Modeling

    CERN Document Server

    Brusan, Altay

    2012-01-01

    The past century was era of linear systems. Either systems (especially industrial ones) were simple (quasi)linear or linear approximations were accurate enough. In addition, just at the ending decades of the century profusion of computing devices were available, before then due to lack of computational resources it was not easy to evaluate available nonlinear system studies. At the moment both these two conditions changed, systems are highly complex and also pervasive amount of computation strength is cheap and easy to achieve. For recent era, a new branch of supervised learning well known as surrogate modeling (meta-modeling, surface modeling) has been devised which aimed at answering new needs of modeling realm. This short literature survey is on to introduce surrogate modeling to whom is familiar with the concepts of supervised learning. Necessity, challenges and visions of the topic are considered.

  15. A Parallel and Distributed Surrogate Model Implementation for Computational Steering

    KAUST Repository

    Butnaru, Daniel

    2012-06-01

    Understanding the influence of multiple parameters in a complex simulation setting is a difficult task. In the ideal case, the scientist can freely steer such a simulation and is immediately presented with the results for a certain configuration of the input parameters. Such an exploration process is however not possible if the simulation is computationally too expensive. For these cases we present in this paper a scalable computational steering approach utilizing a fast surrogate model as substitute for the time-consuming simulation. The surrogate model we propose is based on the sparse grid technique, and we identify the main computational tasks associated with its evaluation and its extension. We further show how distributed data management combined with the specific use of accelerators allows us to approximate and deliver simulation results to a high-resolution visualization system in real-time. This significantly enhances the steering workflow and facilitates the interactive exploration of large datasets. © 2012 IEEE.

  16. The Theory and Practice of Surrogate Decision-Making.

    Science.gov (United States)

    Wendler, David

    2017-01-01

    When a patient lacks decision-making capacity and has not left a clear advance directive, there is now widespread agreement that patient-designated and next-of-kin surrogates should implement substituted judgment within a process of shared decision-making. Specifically, after discussing the "best scientific evidence available, as well as the patient's values, goals, and preferences" with the patient's clinicians, the patient-designated or next-of-kin surrogate should attempt to determine what decision the patient would have made in the circumstances. To the extent that this approach works, it seems to provide about as much respect for the autonomy of incapacitated patients as we could ask for. But, as articles in this issue of the Report by Jeffrey Berger and by Ellen Robinson and colleagues emphasize, reality presents challenges. © 2017 The Hastings Center.

  17. Commercial agencies and surrogate motherhood: a transaction cost approach.

    Science.gov (United States)

    Galbraith, Mhairi; McLachlan, Hugh V; Swales, J Kim

    2005-03-01

    In this paper we investigate the legal arrangements involved in UK surrogate motherhood from a transaction-cost perspective. We outline the specific forms the transaction costs take and critically comment on the way in which the UK institutional and organisational arrangements at present adversely influence transaction costs. We then focus specifically on the potential role of surrogacy agencies and look at UK and US evidence on commercial and voluntary agencies. Policy implications follow.

  18. Quantification of the Relationship between Surrogate Fuel Structure and Performance

    Science.gov (United States)

    2012-07-31

    cycloperoxy-5-yl (BICYC5.O2) and bicyclo[2,2,1]hexene peroxy (C2O2H221) radicals . The latter route leads to the formation of vinyl ketene and the formyl ...3089 selection of stable molecule and radicals . The adopted calculation method for the determination of such data is outlined in Appendix 1...chemistry of aromatic fuel components used in surrogate fuels and the importance of the cyclopentadi- enyl radical in poly-aromatic hydrocarbon (PAH

  19. Biopolicies and biotechnologies: reflections on surrogate maternity in India

    OpenAIRE

    Mónica Amador

    2010-01-01

    This article explores the impact of biotechnology, particularly on assisted reproductive technologies such as surrogate motherhood. The study is based on interviews and field work conducted in the city of Hyderabad in India within the frame of the seminar on “Research Methodology” given by Dr. Rohan D´Souza at the Centre for Studies in Science Policy at the Jawaharlal Nehru University in India. The theoretical framework of this analysis focuses on exploring concepts such as cyborg (Haraway,19...

  20. Biopolicies and biotechnologies: reflections on surrogate maternity in India

    OpenAIRE

    Mónica Amador

    2010-01-01

    This article explores the impact of biotechnology, particularly on assisted reproductive technologies such as surrogate motherhood. The study is based on interviews and field work conducted in the city of Hyderabad in India within the frame of the seminar on “Research Methodology” given by Dr. Rohan D´Souza at the Centre for Studies in Science Policy at the Jawaharlal Nehru University in India. The theoretical framework of this analysis focuses on exploring concepts such as cyborg (Haraway,19...

  1. Diaphragm as an anatomic surrogate for lung tumor motion

    CERN Document Server

    Cervino, Laura I; Sandhu, Ajay; Jiang, Steve B

    2009-01-01

    Lung tumor motion due to respiration poses a challenge in the application of modern three-dimensional conformal radiotherapy. Direct tracking of the lung tumor during radiation therapy is very difficult without implanted fiducial markers. Indirect tracking relies on the correlation of the tumor's motion and the surrogate's motion. The present paper presents an analysis of the correlation between the tumor motion and the diaphragm motion in order to evaluate the potential use of diaphragm as a surrogate for tumor motion. We have analyzed the correlation between diaphragm motion and superior-inferior lung tumor motion in 32 fluoroscopic image sequences from 10 lung cancer patients. A simple linear model and a more complex linear model that accounts for phase delays between the two motions have been used. Results show that the diaphragm is a good surrogate for tumor motion prediction for most patients, resulting in an average correlation factor of 0.94 and 0.98 with each model respectively. The model that accoun...

  2. The Confucian bioethics of surrogate decision making: its communitarian roots.

    Science.gov (United States)

    Fan, Ruiping

    2011-10-01

    The family is the exemplar community of Chinese society. This essay explores how Chinese communitarian norms, expressed in thick commitments to the authority and autonomy of the family, are central to contemporary Chinese bioethics. In particular, it focuses on the issue of surrogate decision making to illustrate the Confucian family-grounded communitarian bioethics. The essay first describes the way in which the family, in Chinese bioethics, functions as a whole to provide consent for significant medical and surgical interventions when a patient has lost decision-making capacity. It is argued that the practice of not having an established order for surrogate decision makers (e.g., spouse, children, and then parents), as it is done in the United States, reflects the acknowledgment that the family as a social reality cannot be reduced to a stereotype of the appropriate order of default decision makers. This description of the family as being in authority to make surrogate decisions for an incompetent family member is enriched by an elaboration of the differences among the concepts of patient autonomy, family autonomy, and moral autonomy. The Chinese model, as well as the Confucian communitarian life of families, engages a family autonomy that is supported by a Confucian understanding of moral autonomy, rather than individual autonomy. Finally, the issue of possible conflicts between patient and family interests in relation to a patient's past wishes in the Chinese model is addressed in light of the role of the physician.

  3. Evaluation of bone surrogates for indirect and direct ballistic fractures.

    Science.gov (United States)

    Bir, Cynthia; Andrecovich, Chris; DeMaio, Marlene; Dougherty, Paul J

    2016-04-01

    The mechanism of injury for fractures to long bones has been studied for both direct ballistic loading as well as indirect. However, the majority of these studies have been conducted on both post-mortem human subjects (PMHS) and animal surrogates which have constraints in terms of storage, preparation and testing. The identification of a validated bone surrogate for use in forensic, medical and engineering testing would provide the ability to investigate ballistic loading without these constraints. Two specific bone surrogates, Sawbones and Synbone, were evaluated in comparison to PMHS for both direct and indirect ballistic loading. For the direct loading, the mean velocity to produce fracture was 121 ± 19 m/s for the PMHS, which was statistically different from the Sawbones (140 ± 7 m/s) and Synbone (146 ± 3 m/s). The average distance to fracture in the indirect loading was .70 cm for the PMHS. The Synbone had a statistically similar average distance to fracture (.61 cm, p=0.54) however the Sawbones average distance to fracture was statistically different (.41 cm, pballistic testing was not identified and future work is warranted.

  4. Surrogate Assisted Design Optimization of an Air Turbine

    Directory of Open Access Journals (Sweden)

    Rameez Badhurshah

    2014-01-01

    Full Text Available Surrogates are cheaper to evaluate and assist in designing systems with lesser time. On the other hand, the surrogates are problem dependent and they need evaluation for each problem to find a suitable surrogate. The Kriging variants such as ordinary, universal, and blind along with commonly used response surface approximation (RSA model were used in the present problem, to optimize the performance of an air impulse turbine used for ocean wave energy harvesting by CFD analysis. A three-level full factorial design was employed to find sample points in the design space for two design variables. A Reynolds-averaged Navier Stokes solver was used to evaluate the objective function responses, and these responses along with the design variables were used to construct the Kriging variants and RSA functions. A hybrid genetic algorithm was used to find the optimal point in the design space. It was found that the best optimal design was produced by the universal Kriging while the blind Kriging produced the worst. The present approach is suggested for renewable energy application.

  5. Indoor radon, geogenic radon surrogates and geology - Investigations on their correlation.

    Science.gov (United States)

    Friedmann, H; Baumgartner, A; Bernreiter, M; Gräser, J; Gruber, V; Kabrt, F; Kaineder, H; Maringer, F J; Ringer, W; Seidel, C; Wurm, G

    2017-01-01

    The indoor radon concentration was measured in most houses in a couple of municipalities in Austria. At the same time the activity concentration of radium in soil, the soil gas radon concentration, the permeability of the ground and the ambient dose equivalent rate were also measured and the geological situations (geological units) were recorded too. From the indoor radon concentration and different house and living parameters a radon potential (Austrian radon potential) was derived which should represent the radon concentration in a standard room. Another radon potential (Neznal radon potential) was calculated from the soil gas radon concentration and the permeability. The aim of the investigation was to correlate all the different variables and to test if the use of surrogate data (e.g. geological information, ambient dose equivalent rate, etc.) can be used to judge the radon risk for an area without performing numerous indoor measurements.

  6. Surrogate model based iterative ensemble smoother for subsurface flow data assimilation

    Science.gov (United States)

    Chang, Haibin; Liao, Qinzhuo; Zhang, Dongxiao

    2017-02-01

    Subsurface geological formation properties often involve some degree of uncertainty. Thus, for most conditions, uncertainty quantification and data assimilation are necessary for predicting subsurface flow. The surrogate model based method is one common type of uncertainty quantification method, in which a surrogate model is constructed for approximating the relationship between model output and model input. Based on the prediction ability, the constructed surrogate model can be utilized for performing data assimilation. In this work, we develop an algorithm for implementing an iterative ensemble smoother (ES) using the surrogate model. We first derive an iterative ES scheme using a regular routine. In order to utilize surrogate models, we then borrow the idea of Chen and Oliver (2013) to modify the Hessian, and further develop an independent parameter based iterative ES formula. Finally, we establish the algorithm for the implementation of iterative ES using surrogate models. Two surrogate models, the PCE surrogate and the interpolation surrogate, are introduced for illustration. The performances of the proposed algorithm are tested by synthetic cases. The results show that satisfactory data assimilation results can be obtained by using surrogate models that have sufficient accuracy.

  7. Uncertainty quantification of squeal instability via surrogate modelling

    Science.gov (United States)

    Nobari, Amir; Ouyang, Huajiang; Bannister, Paul

    2015-08-01

    One of the major issues that car manufacturers are facing is the noise and vibration of brake systems. Of the different sorts of noise and vibration, which a brake system may generate, squeal as an irritating high-frequency noise costs the manufacturers significantly. Despite considerable research that has been conducted on brake squeal, the root cause of squeal is still not fully understood. The most common assumption, however, is mode-coupling. Complex eigenvalue analysis is the most widely used approach to the analysis of brake squeal problems. One of the major drawbacks of this technique, nevertheless, is that the effects of variability and uncertainty are not included in the results. Apparently, uncertainty and variability are two inseparable parts of any brake system. Uncertainty is mainly caused by friction, contact, wear and thermal effects while variability mostly stems from the manufacturing process, material properties and component geometries. Evaluating the effects of uncertainty and variability in the complex eigenvalue analysis improves the predictability of noise propensity and helps produce a more robust design. The biggest hurdle in the uncertainty analysis of brake systems is the computational cost and time. Most uncertainty analysis techniques rely on the results of many deterministic analyses. A full finite element model of a brake system typically consists of millions of degrees-of-freedom and many load cases. Running time of such models is so long that automotive industry is reluctant to do many deterministic analyses. This paper, instead, proposes an efficient method of uncertainty propagation via surrogate modelling. A surrogate model of a brake system is constructed in order to reproduce the outputs of the large-scale finite element model and overcome the issue of computational workloads. The probability distribution of the real part of an unstable mode can then be obtained by using the surrogate model with a massive saving of

  8. Biopolicies and biotechnologies: reflections on surrogate maternity in India

    Directory of Open Access Journals (Sweden)

    Mónica Amador

    2010-07-01

    Full Text Available This article explores the impact of biotechnology, particularly on assisted reproductive technologies such as surrogate motherhood. The study is based on interviews and field work conducted in the city of Hyderabad in India within the frame of the seminar on “Research Methodology” given by Dr. Rohan D´Souza at the Centre for Studies in Science Policy at the Jawaharlal Nehru University in India. The theoretical framework of this analysis focuses on exploring concepts such as cyborg (Haraway,1991 and subaltern subject (Spivak, 1998 in the context of biotechnological production in India

  9. Surrogate based approaches to parameter inference in ocean models

    KAUST Repository

    Knio, Omar

    2016-01-06

    This talk discusses the inference of physical parameters using model surrogates. Attention is focused on the use of sampling schemes to build suitable representations of the dependence of the model response on uncertain input data. Non-intrusive spectral projections and regularized regressions are used for this purpose. A Bayesian inference formalism is then applied to update the uncertain inputs based on available measurements or observations. To perform the update, we consider two alternative approaches, based on the application of Markov Chain Monte Carlo methods or of adjoint-based optimization techniques. We outline the implementation of these techniques to infer dependence of wind drag, bottom drag, and internal mixing coefficients.

  10. Diesel Surrogate Fuels for Engine Testing and Chemical-Kinetic Modeling: Compositions and Properties

    Science.gov (United States)

    Mueller, Charles J.; Cannella, William J.; Bays, J. Timothy; Bruno, Thomas J.; DeFabio, Kathy; Dettman, Heather D.; Gieleciak, Rafal M.; Huber, Marcia L.; Kweon, Chol-Bum; McConnell, Steven S.; Pitz, William J.; Ratcliff, Matthew A.

    2016-01-01

    The primary objectives of this work were to formulate, blend, and characterize a set of four ultralow-sulfur diesel surrogate fuels in quantities sufficient to enable their study in single-cylinder-engine and combustion-vessel experiments. The surrogate fuels feature increasing levels of compositional accuracy (i.e., increasing exactness in matching hydrocarbon structural characteristics) relative to the single target diesel fuel upon which the surrogate fuels are based. This approach was taken to assist in determining the minimum level of surrogate-fuel compositional accuracy that is required to adequately emulate the performance characteristics of the target fuel under different combustion modes. For each of the four surrogate fuels, an approximately 30 L batch was blended, and a number of the physical and chemical properties were measured. This work documents the surrogate-fuel creation process and the results of the property measurements. PMID:27330248

  11. Fast and accurate prediction of numerical relativity waveforms from binary black hole mergers using surrogate models

    CERN Document Server

    Blackman, Jonathan; Galley, Chad R; Szilagyi, Bela; Scheel, Mark A; Tiglio, Manuel; Hemberger, Daniel A

    2015-01-01

    Simulating a binary black hole coalescence by solving Einstein's equations is computationally expensive, requiring days to months of supercomputing time. In this paper, we construct an accurate and fast-to-evaluate surrogate model for numerical relativity (NR) waveforms from non-spinning binary black hole coalescences with mass ratios from $1$ to $10$ and durations corresponding to about $15$ orbits before merger. Our surrogate, which is built using reduced order modeling techniques, is distinct from traditional modeling efforts. We find that the full multi-mode surrogate model agrees with waveforms generated by NR to within the numerical error of the NR code. In particular, we show that our modeling strategy produces surrogates which can correctly predict NR waveforms that were {\\em not} used for the surrogate's training. For all practical purposes, then, the surrogate waveform model is equivalent to the high-accuracy, large-scale simulation waveform but can be evaluated in a millisecond to a second dependin...

  12. Biotin- and glycoprotein-coated microspheres: potential surrogates for studying filtration of cryptosporidium parvum in porous media.

    Science.gov (United States)

    Pang, Liping; Nowostawska, Urszula; Weaver, Louise; Hoffman, Gabrielle; Karmacharya, Anjuman; Skinner, Alexandra; Karki, Naveena

    2012-11-06

    Cryptosporidium parvum is a waterborne pathogen, yet no suitable surrogate has been established for quantifying its filtration removal in porous media. Carboxyl polystyrene microspheres with size, density, and shape similar to C. parvum were coated with biotin (free and containing amine, NH(2)) and glycoprotein. These biomolecules have isoelectric points similar to C. parvum (pH ≈ 2), and glycoprotein is a major type of surface protein that oocysts possess. Zeta potential (ζ) and filtration removal of particles in sand of two different grain sizes were examined. Compared to unmodified microspheres, modified microspheres achieved a superior match to the oocysts in ζ, concentration, mass recovery, and collision coefficient. They showed the same log reduction in concentration as oocysts, whereas results from unmodified microspheres deviated by 1 order of magnitude. Of the three types of modified microspheres, glycoprotein-coated microspheres best resembled oocyst concentration, despite having ζ similar to NH(2)-biotin-coated microspheres, suggesting that surface protein also played an important role in particle attachment on solid surfaces. With further validation in environmental conditions, the surrogates developed here could be a cost-effective new tool for assessing oocyst filtration in porous media, for example, to evaluate the performance of sand filters in water and wastewater treatment, water recycling through riverbank filtration, and aquifer recharge.

  13. Combining endangered plants and animals as surrogates to identify priority conservation areas in Yunnan, China

    OpenAIRE

    Feiling Yang; Jinming Hu; Ruidong Wu

    2016-01-01

    Suitable surrogates are critical for identifying optimal priority conservation areas (PCAs) to protect regional biodiversity. This study explored the efficiency of using endangered plants and animals as surrogates for identifying PCAs at the county level in Yunnan, southwest China. We ran the Dobson algorithm under three surrogate scenarios at 75% and 100% conservation levels and identified four types of PCAs. Assessment of the protection efficiencies of the four types of PCAs showed that end...

  14. Evaluation of the use of surrogate Laminaria digitata in eco-hydraulic laboratory experiments

    Institute of Scientific and Technical Information of China (English)

    PAUL Maike; HENRY Pierre-Yves T

    2014-01-01

    Inert surrogates can avoid husbandry and adaptation problems of live vegetation in laboratories. Surrogates are generally used for experiments on vegetation-hydrodynamics interactions, but it is unclear how well they replicate field conditions. Here, surrogates for the brown macroalgae Laminaria digitata were developed to reproduce its hydraulic roughness. Plant shape, stiffness and buoyancy of L. digitata were evaluated and compared to the properties of inert materials. Different surrogate materials and shapes were exposed to unidirectional flow. It is concluded that buoyancy is an important factor in low flow conditions and a basic shape might be sufficient to model complex shaped plants resulting in the same streamlined shape.

  15. The use of surrogate endpoints in regulating medicines for cardio-renal disease: opinions of stakeholders.

    Directory of Open Access Journals (Sweden)

    Bauke Schievink

    Full Text Available AIM: There is discussion whether medicines can be authorized on the market based on evidence from surrogate endpoints. We assessed opinions of different stakeholders on this topic. METHODS: We conducted an online questionnaire that targeted various stakeholder groups (regulatory agencies, pharmaceutical industry, academia, relevant public sector organisations and medical specialties (cardiology or nephrology vs. other. Participants were enrolled through purposeful sampling. We inquired for conditions under which surrogate endpoints can be used, the validity of various cardio-renal biomarkers and new approaches for biomarker use. RESULTS: Participants agreed that surrogate endpoints can be used when the surrogate is scientifically valid (5-point Likert response format, mean score: 4.3, SD: 0.9 or when there is an unmet clinical need (mean score: 3.8, SD: 1.2. Industry participants agreed to a greater extent than regulators and academics. However, out of four proposed surrogates (blood pressure (BP, HbA1c, albuminuria, CRP for cardiovascular outcomes or end-stage renal disease, only use of BP for cardiovascular outcomes was deemed moderately accurate (mean: 3.6, SD: 1.1. Specialists in cardiology or nephrology tended to be more positive about the use of surrogate endpoints. CONCLUSION: Stakeholders in drug development do not oppose to the use of surrogate endpoints in drug marketing authorization, but most surrogates are not considered valid. To solve this impasse, increased efforts are required to validate surrogate endpoints and to explore alternative ways to use them.

  16. SU-E-I-71: Quality Assessment of Surrogate Metrics in Multi-Atlas-Based Image Segmentation

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, T; Ruan, D [UCLA School of Medicine, Los Angeles, CA (United States)

    2015-06-15

    Purpose: With the ever-growing data of heterogeneous quality, relevance assessment of atlases becomes increasingly critical for multi-atlas-based image segmentation. However, there is no universally recognized best relevance metric and even a standard to compare amongst candidates remains elusive. This study, for the first time, designs a quantification to assess relevance metrics’ quality, based on a novel perspective of the metric as surrogate for inferring the inaccessible oracle geometric agreement. Methods: We first develop an inference model to relate surrogate metrics in image space to the underlying oracle relevance metric in segmentation label space, with a monotonically non-decreasing function subject to random perturbations. Subsequently, we investigate model parameters to reveal key contributing factors to surrogates’ ability in prognosticating the oracle relevance value, for the specific task of atlas selection. Finally, we design an effective contract-to-noise ratio (eCNR) to quantify surrogates’ quality based on insights from these analyses and empirical observations. Results: The inference model was specialized to a linear function with normally distributed perturbations, with surrogate metric exemplified by several widely-used image similarity metrics, i.e., MSD/NCC/(N)MI. Surrogates’ behaviors in selecting the most relevant atlases were assessed under varying eCNR, showing that surrogates with high eCNR dominated those with low eCNR in retaining the most relevant atlases. In an end-to-end validation, NCC/(N)MI with eCNR of 0.12 compared to MSD with eCNR of 0.10 resulted in statistically better segmentation with mean DSC of about 0.85 and the first and third quartiles of (0.83, 0.89), compared to MSD with mean DSC of 0.84 and the first and third quartiles of (0.81, 0.89). Conclusion: The designed eCNR is capable of characterizing surrogate metrics’ quality in prognosticating the oracle relevance value. It has been demonstrated to be

  17. Detailed chemical kinetic oxidation mechanism for a biodiesel surrogate

    Energy Technology Data Exchange (ETDEWEB)

    Herbinet, O; Pitz, W J; Westbrook, C K

    2007-09-20

    A detailed chemical kinetic mechanism has been developed and used to study the oxidation of methyl decanoate, a surrogate for biodiesel fuels. This model has been built by following the rules established by Curran et al. for the oxidation of n-heptane and it includes all the reactions known to be pertinent to both low and high temperatures. Computed results have been compared with methyl decanoate experiments in an engine and oxidation of rapeseed oil methyl esters in a jet stirred reactor. An important feature of this mechanism is its ability to reproduce the early formation of carbon dioxide that is unique to biofuels and due to the presence of the ester group in the reactant. The model also predicts ignition delay times and OH profiles very close to observed values in shock tube experiments fueled by n-decane. These model capabilities indicate that large n-alkanes can be good surrogates for large methyl esters and biodiesel fuels to predict overall reactivity, but some kinetic details, including early CO{sub 2} production from biodiesel fuels, can be predicted only by a detailed kinetic mechanism for a true methyl ester fuel. The present methyl decanoate mechanism provides a realistic kinetic tool for simulation of biodiesel fuels.

  18. Detailed chemical kinetic oxidation mechanism for a biodiesel surrogate

    Energy Technology Data Exchange (ETDEWEB)

    Herbinet, O; Pitz, W J; Westbrook, C K

    2007-09-17

    A detailed chemical kinetic mechanism has been developed and used to study the oxidation of methyl decanoate, a surrogate for biodiesel fuels. This model has been built by following the rules established by Curran et al. for the oxidation of n-heptane and it includes all the reactions known to be pertinent to both low and high temperatures. Computed results have been compared with methyl decanoate experiments in an engine and oxidation of rapeseed oil methyl esters in a jet stirred reactor. An important feature of this mechanism is its ability to reproduce the early formation of carbon dioxide that is unique to biofuels and due to the presence of the ester group in the reactant. The model also predicts ignition delay times and OH profiles very close to observed values in shock tube experiments fueled by n-decane. These model capabilities indicate that large n-alkanes can be good surrogates for large methyl esters and biodiesel fuels to predict overall reactivity, but some kinetic details, including early CO2 production from biodiesel fuels, can be predicted only by a detailed kinetic mechanism for a true methyl ester fuel. The present methyl decanoate mechanism provides a realistic kinetic tool for simulation of biodiesel fuels.

  19. Simultaneous Thermal Analysis of Remediated Nitrate Salt Surrogates

    Energy Technology Data Exchange (ETDEWEB)

    Wayne, David Matthew [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-05-13

    The actinide engineering and science group (MET-1) have completed simultaneous thermal analysis and offgas analysis by mass spectrometry (STA-MS) of remediated nitrate salt (RNS) surrogates formulated by the high explosives science and technology group (M-7). The 1.0 to 1.5g surrogate samples were first analyzed as received, then a new set was analyzed with 100-200mL 10M HNO3 +0.3 MHF added, and a third set was analyzed after 200 mL of a concentrated Pu-AM spike (in 10M HNO3 +0.3 MHF) was added. The acid and spike solutions were formulated by the actinide analytical chemistry group (C-AAC) using reagent-grade HNO3 and HF, which was also used to dissolve a small quantity of mixed, high-fired PuO2/ AmO2 oxide.

  20. Detailed chemical kinetic oxidation mechanism for a biodiesel surrogate

    Energy Technology Data Exchange (ETDEWEB)

    Herbinet, O; Pitz, W J; Westbrook, C K

    2007-09-20

    A detailed chemical kinetic mechanism has been developed and used to study the oxidation of methyl decanoate, a surrogate for biodiesel fuels. This model has been built by following the rules established by Curran et al. for the oxidation of n-heptane and it includes all the reactions known to be pertinent to both low and high temperatures. Computed results have been compared with methyl decanoate experiments in an engine and oxidation of rapeseed oil methyl esters in a jet stirred reactor. An important feature of this mechanism is its ability to reproduce the early formation of carbon dioxide that is unique to biofuels and due to the presence of the ester group in the reactant. The model also predicts ignition delay times and OH profiles very close to observed values in shock tube experiments fueled by n-decane. These model capabilities indicate that large n-alkanes can be good surrogates for large methyl esters and biodiesel fuels to predict overall reactivity, but some kinetic details, including early CO{sub 2} production from biodiesel fuels, can be predicted only by a detailed kinetic mechanism for a true methyl ester fuel. The present methyl decanoate mechanism provides a realistic kinetic tool for simulation of biodiesel fuels.

  1. Detailed chemical kinetic oxidation mechanism for a biodiesel surrogate

    Energy Technology Data Exchange (ETDEWEB)

    Herbinet, O; Pitz, W J; Westbrook, C K

    2007-09-17

    A detailed chemical kinetic mechanism has been developed and used to study the oxidation of methyl decanoate, a surrogate for biodiesel fuels. This model has been built by following the rules established by Curran et al. for the oxidation of n-heptane and it includes all the reactions known to be pertinent to both low and high temperatures. Computed results have been compared with methyl decanoate experiments in an engine and oxidation of rapeseed oil methyl esters in a jet stirred reactor. An important feature of this mechanism is its ability to reproduce the early formation of carbon dioxide that is unique to biofuels and due to the presence of the ester group in the reactant. The model also predicts ignition delay times and OH profiles very close to observed values in shock tube experiments fueled by n-decane. These model capabilities indicate that large n-alkanes can be good surrogates for large methyl esters and biodiesel fuels to predict overall reactivity, but some kinetic details, including early CO2 production from biodiesel fuels, can be predicted only by a detailed kinetic mechanism for a true methyl ester fuel. The present methyl decanoate mechanism provides a realistic kinetic tool for simulation of biodiesel fuels.

  2. Premixed flame chemistry of a gasoline primary reference fuel surrogate

    KAUST Repository

    Selim, Hatem

    2017-03-10

    Investigating the combustion chemistry of gasoline surrogate fuels promises to improve detailed reaction mechanisms used for simulating their combustion. In this work, the combustion chemistry of one of the simplest, but most frequently used gasoline surrogates – primary reference fuel 84 (PRF 84, 84 vol% iso-octane and 16 vol% n-heptane), has been examined in a stoichiometric premixed laminar flame. Time-of-flight mass spectrometry coupled with a vacuum ultraviolet (VUV) synchrotron light source for species photoionization was used. Reactants, major end-products, stable intermediates, free radicals, and isomeric species were detected and quantified. Numerical simulations were conducted using a detailed chemical kinetic model with the most recently available high temperature sub-mechanisms for iso-octane and heptane, built on the top of an updated pentane isomers model and AramcoMech 2.0 (C0C4) base chemistry. A detailed interpretation of the major differences between the mechanistic pathways of both fuel components is given. A comparison between the experimental and numerical results is depicted and rate of production and sensitivity analyses are shown for the species with considerable disagreement between the experimental and numerical findings.

  3. Bayesian Calibration of the Community Land Model using Surrogates

    Energy Technology Data Exchange (ETDEWEB)

    Ray, Jaideep; Hou, Zhangshuan; Huang, Maoyi; Sargsyan, K.; Swiler, Laura P.

    2015-01-01

    We present results from the Bayesian calibration of hydrological parameters of the Community Land Model (CLM), which is often used in climate simulations and Earth system models. A statistical inverse problem is formulated for three hydrological parameters, conditioned on observations of latent heat surface fluxes over 48 months. Our calibration method uses polynomial and Gaussian process surrogates of the CLM, and solves the parameter estimation problem using a Markov chain Monte Carlo sampler. Posterior probability densities for the parameters are developed for two sites with different soil and vegetation covers. Our method also allows us to examine the structural error in CLM under two error models. We find that accurate surrogate models can be created for CLM in most cases. The posterior distributions lead to better prediction than the default parameter values in CLM. Climatologically averaging the observations does not modify the parameters’ distributions significantly. The structural error model reveals a correlation time-scale which can potentially be used to identify physical processes that could be contributing to it. While the calibrated CLM has a higher predictive skill, the calibration is under-dispersive.

  4. Fractional flow reserve as a surrogate for inducible myocardial ischaemia.

    Science.gov (United States)

    van de Hoef, Tim P; Meuwissen, Martijn; Escaned, Javier; Davies, Justin E; Siebes, Maria; Spaan, Jos A E; Piek, Jan J

    2013-08-01

    Documentation of inducible myocardial ischaemia, related to the coronary stenosis of interest, is of increasing importance in lesion selection for percutaneous coronary intervention (PCI). Fractional flow reserve (FFR) is an easily understood, routine diagnostic modality that has become part of daily clinical practice, and is used as a surrogate technique for noninvasive assessment of myocardial ischaemia. However, the application of a single, discrete, cut-off value for FFR-guided lesion selection for PCI, and its adoption in contemporary revascularization guidelines, has limited the requirement for a thorough understanding of the physiological basis of FFR. This limitation constitutes an obstacle for the adequate use and interpretation of this technique, and also for the understanding of new and future modalities of physiological functional intracoronary testing. In this Review, we revisit the fundamental elements of coronary physiology in the absence or presence of coronary artery disease. We provide insight into three essential characteristics of FFR as a diagnostic tool in contemporary clinical practice--the theoretical framework of FFR and its associated limitations; the characteristics and role of FFR as a surrogate for noninvasively assessed myocardial ischaemia; and the requirement and associated caveats of potent vasodilatory drugs to induce maximal vasodilatation of the coronary vascular bed.

  5. The development of radioactive sample surrogates for training and exercises

    Energy Technology Data Exchange (ETDEWEB)

    Martha Finck; Bevin Brush; Dick Jansen; David Chamberlain; Don Dry; George Brooks; Margaret Goldberg

    2012-03-01

    The development of radioactive sample surrogates for training and exercises Source term information is required for to reconstruct a device used in a dispersed radiological dispersal device. Simulating a radioactive environment to train and exercise sampling and sample characterization methods with suitable sample materials is a continued challenge. The Idaho National Laboratory has developed and permitted a Radioactive Response Training Range (RRTR), an 800 acre test range that is approved for open air dispersal of activated KBr, for training first responders in the entry and exit from radioactively contaminated areas, and testing protocols for environmental sampling and field characterization. Members from the Department of Defense, Law Enforcement, and the Department of Energy participated in the first contamination exercise that was conducted at the RRTR in the July 2011. The range was contaminated using a short lived radioactive Br-82 isotope (activated KBr). Soil samples contaminated with KBr (dispersed as a solution) and glass particles containing activated potassium bromide that emulated dispersed radioactive materials (such as ceramic-based sealed source materials) were collected to assess environmental sampling and characterization techniques. This presentation summarizes the performance of a radioactive materials surrogate for use as a training aide for nuclear forensics.

  6. Pan masala advertisements are surrogate for tobacco products.

    Science.gov (United States)

    Sushma, C; Sharang, C

    2005-01-01

    Pan masala is a comparatively recent habit in India and is marketed with and without tobacco. Advertisements of tobacco products have been banned in India since 1st May 2004. The advertisements of plain pan masala, which continue in Indian media, have been suspected to be surrogate for tobacco products bearing the same name. The study was carried out to assess whether these advertisements were for the intended product, or for tobacco products with same brand name. The programme of a popular television Hindi news channel was watched for a 24-h period. Programmes on the same channel and its English counterpart were watched on different days to assess whether the advertisements were repeated. The total duration of telecast of a popular brand of plain pan masala (Pan Parag) was multiplied by the rate charged by the channel to provide the cost of advertisement of this product. The total sale value of the company was multiplied by the proportion of usage of plain pan masala out of gutka plus pan masala habit as observed from a different study, to provide the annual sale value of plain pan masala product under reference. The annual sale value of plain Pan Parag was estimated to be Rs. 67.1 million. The annual cost of the advertisement of the same product on two television channels was estimated at Rs. 244.6 million. The advertisements of plain pan masala seen on Indian television are a surrogate for the tobacco products bearing the same name.

  7. Defining useful surrogates for user participation in online medical learning.

    LENUS (Irish Health Repository)

    Beddy, Peter

    2012-02-01

    "School for Surgeons" is a web-based distance learning program which provides online clinical-based tutorials to surgical trainees. Our aim was to determine surrogates of active participation and to assess the efficacy of methods to improve usage. Server logs of the 82 participants in the "School for Surgeons" were assessed for the two terms of the first year of the program. Data collected included total time online, mean session time, page requests, numbers of sessions online and the total number of assignments. An intervention regarding comparative peer usage patterns was delivered to the cohort between terms one and two. Of the 82 trainees enrolled, 83% (85% second term) logged into the program. Of all participants 88% (97% second term) submitted at least one assignment. Median submissions were four (eight second term) per trainee. Assignment submission closely correlated with number of sessions, total time online, downloads and page requests. Peer-based comparative feedback resulted in a significant increase in the number of assignments submitted (p < 0.01). Despite its recent introduction, "School for Surgeons" has a good participation rate. Assignment submission is a valid surrogate for usage. Students can be encouraged to move from passive observation to active participation in a virtual learning environment by providing structured comparative feedback ranking their performance.

  8. Proper Orthogonal Decomposition as Surrogate Model for Aerodynamic Optimization

    Directory of Open Access Journals (Sweden)

    Valentina Dolci

    2016-01-01

    Full Text Available A surrogate model based on the proper orthogonal decomposition is developed in order to enable fast and reliable evaluations of aerodynamic fields. The proposed method is applied to subsonic turbulent flows and the proper orthogonal decomposition is based on an ensemble of high-fidelity computations. For the construction of the ensemble, fractional and full factorial planes together with central composite design-of-experiment strategies are applied. For the continuous representation of the projection coefficients in the parameter space, response surface methods are employed. Three case studies are presented. In the first case, the boundary shape of the problem is deformed and the flow past a backward facing step with variable step slope is studied. In the second case, a two-dimensional flow past a NACA 0012 airfoil is considered and the surrogate model is constructed in the (Mach, angle of attack parameter space. In the last case, the aerodynamic optimization of an automotive shape is considered. The results demonstrate how a reduced-order model based on the proper orthogonal decomposition applied to a small number of high-fidelity solutions can be used to generate aerodynamic data with good accuracy at a low cost.

  9. Bayesian calibration of the Community Land Model using surrogates

    Energy Technology Data Exchange (ETDEWEB)

    Ray, Jaideep; Hou, Zhangshuan; Huang, Maoyi; Swiler, Laura Painton

    2014-02-01

    We present results from the Bayesian calibration of hydrological parameters of the Community Land Model (CLM), which is often used in climate simulations and Earth system models. A statistical inverse problem is formulated for three hydrological parameters, conditional on observations of latent heat surface fluxes over 48 months. Our calibration method uses polynomial and Gaussian process surrogates of the CLM, and solves the parameter estimation problem using a Markov chain Monte Carlo sampler. Posterior probability densities for the parameters are developed for two sites with different soil and vegetation covers. Our method also allows us to examine the structural error in CLM under two error models. We find that surrogate models can be created for CLM in most cases. The posterior distributions are more predictive than the default parameter values in CLM. Climatologically averaging the observations does not modify the parameters' distributions significantly. The structural error model reveals a correlation time-scale which can be used to identify the physical process that could be contributing to it. While the calibrated CLM has a higher predictive skill, the calibration is under-dispersive.

  10. Anthropometric surrogates to identify low birth weight Nepalese newborns: a hospital-based study

    Directory of Open Access Journals (Sweden)

    Singh Dela

    2008-04-01

    Full Text Available Abstract Background In Nepal, more than 90% of the deliveries take place at home where birth weight is often not recorded. In developing countries, low birth weight (LBW, Methods A cross-sectional study was carried out in Western Regional Hospital, Pokhara between April and June, 2006. All consecutive full-term, singleton, live born babies were included. To ensure reliability and avoid inter-observer bias one of the investigators weighed all the newborns and carried out anthropometric measurements within 24 hours after birth. Circumferences of head, chest, mid-upper arm, thigh and calf were measured according to standard techniques. Non-parametric receiver operating characteristic (ROC curve analyses were carried out using bootstrap to calculate 95% confidence intervals of areas under the curve (AUC. The cut-points with lowest total misclassification rate were chosen to identify LBW babies. Results Out of 400 newborns studied, 204 (51% were males and 196 (49% were females. The mean birth weight was 3029 ± 438 grams and 34 (8.5% newborns were LBW. By ROC-AUC analyses, head circumference (AUC = 0.89, 95% CI 0.85 to 0.93 and chest circumference (AUC = 0.86, 95% CI 0.80 to 0.91 were identified as the optimal surrogate indicators of LBW babies. The optimal cut-points for head circumference and chest circumference to identify LBW newborns were ≥ 33.5 cm and ≥ 30.8 cm respectively. Conclusion Head and chest circumferences were the best anthropometric surrogates of LBW among Nepalese newborns. Further studies are needed in the field to cross-validate our results.

  11. Surrogate-driven deformable motion model for organ motion tracking in particle radiation therapy

    Science.gov (United States)

    Fassi, Aurora; Seregni, Matteo; Riboldi, Marco; Cerveri, Pietro; Sarrut, David; Battista Ivaldi, Giovanni; Tabarelli de Fatis, Paola; Liotta, Marco; Baroni, Guido

    2015-02-01

    The aim of this study is the development and experimental testing of a tumor tracking method for particle radiation therapy, providing the daily respiratory dynamics of the patient’s thoraco-abdominal anatomy as a function of an external surface surrogate combined with an a priori motion model. The proposed tracking approach is based on a patient-specific breathing motion model, estimated from the four-dimensional (4D) planning computed tomography (CT) through deformable image registration. The model is adapted to the interfraction baseline variations in the patient’s anatomical configuration. The driving amplitude and phase parameters are obtained intrafractionally from a respiratory surrogate signal derived from the external surface displacement. The developed technique was assessed on a dataset of seven lung cancer patients, who underwent two repeated 4D CT scans. The first 4D CT was used to build the respiratory motion model, which was tested on the second scan. The geometric accuracy in localizing lung lesions, mediated over all breathing phases, ranged between 0.6 and 1.7 mm across all patients. Errors in tracking the surrounding organs at risk, such as lungs, trachea and esophagus, were lower than 1.3 mm on average. The median absolute variation in water equivalent path length (WEL) within the target volume did not exceed 1.9 mm-WEL for simulated particle beams. A significant improvement was achieved compared with error compensation based on standard rigid alignment. The present work can be regarded as a feasibility study for the potential extension of tumor tracking techniques in particle treatments. Differently from current tracking methods applied in conventional radiotherapy, the proposed approach allows for the dynamic localization of all anatomical structures scanned in the planning CT, thus providing complete information on density and WEL variations required for particle beam range adaptation.

  12. Insights Into Atmospheric Aqueous Organic Chemistry Through Controlled Experiments with Cloud Water Surrogates

    Science.gov (United States)

    Turpin, B. J.; Ramos, A.; Kirkland, J. R.; Lim, Y. B.; Seitzinger, S.

    2011-12-01

    There is considerable laboratory and field-based evidence that chemical processing in clouds and wet aerosols alters organic composition and contributes to the formation of secondary organic aerosol (SOA). Single-compound laboratory experiments have played an important role in developing aqueous-phase chemical mechanisms that aid prediction of SOA formation through multiphase chemistry. In this work we conduct similar experiments with cloud/fog water surrogates, to 1) evaluate to what extent the previously studied chemistry is observed in these more realistic atmospheric waters, and 2) to identify additional atmospherically-relevant precursors and products that require further study. We used filtered Camden and Pinelands, NJ rainwater as a surrogate for cloud water. OH radical (~10-12 M) was formed by photolysis of hydrogen peroxide and samples were analyzed in real-time by electrospray ionization mass spectroscopy (ESI-MS). Discrete samples were also analyzed by ion chromatography (IC) and ESI-MS after IC separation. All experiments were performed in duplicate. Standards of glyoxal, methylglyoxal and glycolaldehyde and their major aqueous oxidation products were also analyzed, and control experiments performed. Decreases in the ion abundance of many positive mode compounds and increases in the ion abundance of many negative mode compounds (e.g., organic acids) suggest that precursors are predominantly aldehydes, organic peroxides and/or alcohols. Real-time ESI mass spectra were consistent with the expected loss of methylglyoxal and subsequent formation of pyruvate, glyoxylate, and oxalate. New insights regarding other potential precursors and products will be provided.

  13. Vertical Flume Testing of WIPP Surrogate Waste Materials

    Science.gov (United States)

    Herrick, C. G.; Schuhen, M.; Kicker, D.

    2013-12-01

    The Waste Isolation Pilot Plant (WIPP) is a U.S. Department of Energy geological repository for the permanent disposal of defense-related transuranic (TRU) waste. The waste is emplaced in rooms excavated in the bedded Salado salt formation at a depth of 655 m below ground surface. After emplacement of the waste, the repository will be sealed and decommissioned. The DOE demonstrates compliance with 40 CFR 194 by means of performance assessment (PA) calculations conducted by Sandia National Laboratories. WIPP PA calculations estimate the probability and consequences of radionuclide releases for a 10,000 year regulatory period. Human intrusion scenarios include cases in which a future borehole is drilled through the repository. Drilling mud flowing up the borehole will apply a hydrodynamic shear stress to the borehole wall which could result in erosion of the waste and radionuclides being carried up the borehole. WIPP PA uses the parameter TAUFAIL to represent the shear strength of the degraded waste. The hydrodynamic shear strength can only be measured experimentally by flume testing. Flume testing is typically performed horizontally, mimicking stream or ocean currents. However, in a WIPP intrusion event, the drill bit would penetrate the degraded waste and drilling mud would flow up the borehole in a predominantly vertical direction. In order to simulate this, a flume was designed and built so that the eroding fluid enters an enclosed vertical channel from the bottom and flows up past a specimen of surrogate waste material. The sample is pushed into the current by a piston attached to a step motor. A qualified data acquisition system controls and monitors the fluid's flow rate, temperature, pressure, and conductivity and the step motor's operation. The surrogate materials used correspond to a conservative estimate of degraded TRU waste at the end of the regulatory period. The recipes were previously developed by SNL based on anticipated future states of the waste

  14. A review of selection-based tests of abiotic surrogates for species representation.

    Science.gov (United States)

    Beier, Paul; Sutcliffe, Patricia; Hjort, Jan; Faith, Daniel P; Pressey, Robert L; Albuquerque, Fabio

    2015-06-01

    Because conservation planners typically lack data on where species occur, environmental surrogates--including geophysical settings and climate types--have been used to prioritize sites within a planning area. We reviewed 622 evaluations of the effectiveness of abiotic surrogates in representing species in 19 study areas. Sites selected using abiotic surrogates represented more species than an equal number of randomly selected sites in 43% of tests (55% for plants) and on average improved on random selection of sites by about 8% (21% for plants). Environmental diversity (ED) (42% median improvement on random selection) and biotically informed clusters showed promising results and merit additional testing. We suggest 4 ways to improve performance of abiotic surrogates. First, analysts should consider a broad spectrum of candidate variables to define surrogates, including rarely used variables related to geographic separation, distance from coast, hydrology, and within-site abiotic diversity. Second, abiotic surrogates should be defined at fine thematic resolution. Third, sites (the landscape units prioritized within a planning area) should be small enough to ensure that surrogates reflect species' environments and to produce prioritizations that match the spatial resolution of conservation decisions. Fourth, if species inventories are available for some planning units, planners should define surrogates based on the abiotic variables that most influence species turnover in the planning area. Although species inventories increase the cost of using abiotic surrogates, a modest number of inventories could provide the data needed to select variables and evaluate surrogates. Additional tests of nonclimate abiotic surrogates are needed to evaluate the utility of conserving nature's stage as a strategy for conservation planning in the face of climate change. © 2015 Society for Conservation Biology.

  15. Biotin- and Glycoprotein-Coated Microspheres as Surrogates for Studying Filtration Removal of Cryptosporidium parvum in a Granular Limestone Aquifer Medium.

    Science.gov (United States)

    Stevenson, M E; Blaschke, A P; Toze, S; Sidhu, J P S; Ahmed, W; van Driezum, I H; Sommer, R; Kirschner, A K T; Cervero-Aragó, S; Farnleitner, A H; Pang, L

    2015-07-01

    Members of the genus Cryptosporidium are waterborne protozoa of great health concern. Many studies have attempted to find appropriate surrogates for assessing Cryptosporidium filtration removal in porous media. In this study, we evaluated the filtration of Cryptosporidium parvum in granular limestone medium by the use of biotin- and glycoprotein-coated carboxylated polystyrene microspheres (CPMs) as surrogates. Column experiments were carried out with core material taken from a managed aquifer recharge site in Adelaide, Australia. For the experiments with injection of a single type of particle, we observed the total removal of the oocysts and glycoprotein-coated CPMs, a 4.6- to 6.3-log10 reduction of biotin-coated CPMs, and a 2.6-log10 reduction of unmodified CPMs. When two different types of particles were simultaneously injected, glycoprotein-coated CPMs showed a 5.3-log10 reduction, while the uncoated CPMs displayed a 3.7-log10 reduction, probably due to particle-particle interactions. Our results confirm that glycoprotein-coated CPMs are the most accurate surrogates for C. parvum; biotin-coated CPMs are slightly more conservative, while unmodified CPMs are markedly overly conservative for predicting C. parvum removal in granular limestone medium. The total removal of C. parvum observed in our study suggests that granular limestone medium is very effective for the filtration removal of C. parvum and could potentially be used for the pretreatment of drinking water and aquifer storage recovery of recycled water.

  16. Calculations of Compound Nucleus Spin-Parity Distributions Populated via the (p,t Reaction in Support of Surrogate Neutron Capture Measurements

    Directory of Open Access Journals (Sweden)

    Benstead J.

    2016-01-01

    Full Text Available The surrogate reaction method may be used to determine the cross section for neutron induced reactions not accessible through standard experimental techniques. This is achieved by creating the same compound nucleus as would be expected in the desired reaction, but through a different incident channel, generally a direct transfer reaction. So far, the surrogate technique has been applied with reasonable success to determine the fission cross section for a number of actinides, but has been less successful when applied to other reactions, e.g. neutron capture, due to a ‘spin-parity mismatch’. This mismatch, between the spin and parity distributions of the excited levels of the compound nucleus populated in the desired and surrogate channels, leads to differing decay probabilities and hence reduces the validity of using the surrogate method to infer the cross section in the desired channel. A greater theoretical understanding of the expected distribution of levels excited in both the desired and surrogate channels is therefore required in order to attempt to address this mismatch and allow the method to be utilised with greater confidence. Two neutron transfer reactions, e.g. (p,t, which allow the technique to be utilised for isotopes further removed from the line of stability, are the subject of this study. Results are presented for the calculated distribution of compound nucleus states populated in 90Zr, via the 90Zr(p,t90Zr reaction, and are compared against measured data at an incident proton energy of 28.56 MeV.

  17. Top predators: hot or not? A call for systematic assessment of biodiversity surrogates

    NARCIS (Netherlands)

    Cabeza, M.; Arponen, A.; Teeffelen, van A.J.A.

    2008-01-01

    argue that top predators are justified conservation surrogates based on a case study where raptor presence is associated with high species richness of birds, butterflies and trees. 2. We question the methodology as well as the applicability of their results, and clarify differences between surrogate

  18. Comparison of surrogate models with different methods in groundwater remediation process

    Indian Academy of Sciences (India)

    Jiannan Luo; Wenxi Lu

    2014-10-01

    Surrogate modelling is an effective tool for reducing computational burden of simulation optimization. In this article, polynomial regression (PR), radial basis function artificial neural network (RBFANN), and kriging methods were compared for building surrogate models of a multiphase flow simulation model in a simplified nitrobenzene contaminated aquifer remediation problem. In the model accuracy analysis process, a 10-fold cross validation method was adopted to evaluate the approximation accuracy of the three surrogate models. The results demonstrated that: RBFANN surrogate model and kriging surrogate model had acceptable approximation accuracy, and further that kriging model’s approximation accuracy was slightly higher than RBFANN model. However, the PR model demonstrated unacceptably poor approximation accuracy. Therefore, the RBFANN and kriging surrogates were selected and used in the optimization process to identify the most cost-effective remediation strategy at a nitrobenzene-contaminated site. The optimal remediation costs obtained with the two surrogate-based optimization models were similar, and had similar computational burden. These two surrogate-based optimization models are efficient tools for optimal groundwater remediation strategy identification.

  19. Someone to Lean on: Assessment and Implications of Social Surrogate Use in Childhood

    Science.gov (United States)

    Arbeau, Kimberley A.; Coplan, Robert J.; Matheson, Adrienne

    2012-01-01

    A social surrogate is a person who helps a shy individual deal with the stresses of a social situation. Previous research has only investigated social surrogate use in adults. The purpose of the current study was to develop and evaluate a new self-report measure of social surrogacy in middle childhood and to explore the implications of this…

  20. Critical review of norovirus surrogates in food safety research: rationale for considering volunteer studies

    Science.gov (United States)

    The inability to propagate human norovirus (NoV) or to clearly differentiate infectious from noninfectious virus particles have led to the use of surrogate viruses, like feline calicivirus (FCV) and murine norovirus-1 (MNV), which are propagatable in cell culture. The use of surrogates is predicate...

  1. Sparse polynomial surrogates for aerodynamic computations with random inputs

    CERN Document Server

    Savin, Eric; Peter, Jacques

    2015-01-01

    This paper deals with some of the methodologies used to construct polynomial surrogate models based on generalized polynomial chaos (gPC) expansions for applications to uncertainty quantification (UQ) in aerodynamic computations. A core ingredient in gPC expansions is the choice of a dedicated sampling strategy, so as to define the most significant scenarios to be considered for the construction of such metamodels. A desirable feature of the proposed rules shall be their ability to handle several random inputs simultaneously. Methods to identify the relative "importance" of those variables or uncertain data shall be ideally considered as well. The present work is more particularly dedicated to the development of sampling strategies based on sparsity principles. Sparse multi-dimensional cubature rules based on general one-dimensional Gauss-Jacobi-type quadratures are first addressed. These sets are non nested, but they are well adapted to the probability density functions with compact support for the random in...

  2. High-Temperature Oxidation of Plutonium Surrogate Metals and Alloys

    Energy Technology Data Exchange (ETDEWEB)

    Sparks, Joshua C. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Krantz, Kelsie E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Christian, Jonathan H. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Washington, II, Aaron L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-07-27

    The Plutonium Management and Disposition Agreement (PMDA) is a nuclear non-proliferation agreement designed to remove 34 tons of weapons-grade plutonium from Russia and the United States. While several removal options have been proposed since the agreement was first signed in 2000, processing the weapons-grade plutonium to mixed-oxide (MOX) fuel has remained the leading candidate for achieving the goals of the PMDA. However, the MOX program has received its share of criticisms, which causes its future to be uncertain. One alternative pathway for plutonium disposition would involve oxidizing the metal followed by impurity down blending and burial in the Waste Isolation Pilot Plant (WIPP) in Carlsbad, New Mexico. This pathway was investigated by use of a hybrid microwave and a muffle furnace with Fe and Al as surrogate materials. Oxidation occurred similarly in the microwave and muffle furnace; however, the microwave process time was significantly faster.

  3. Protein prosthesis: β-peptides as reverse-turn surrogates.

    Science.gov (United States)

    Arnold, Ulrich; Huck, Bayard R; Gellman, Samuel H; Raines, Ronald T

    2013-03-01

    The introduction of non-natural modules could provide unprecedented control over folding/unfolding behavior, conformational stability, and biological function of proteins. Success requires the interrogation of candidate modules in natural contexts. Here, expressed protein ligation is used to replace a reverse turn in bovine pancreatic ribonuclease (RNase A) with a synthetic β-dipeptide: β²-homoalanine-β³-homoalanine. This segment is known to adopt an unnatural reverse-turn conformation that contains a 10-membered ring hydrogen bond, but one with a donor-acceptor pattern opposite to that in the 10-membered rings of natural reverse turns. The RNase A variant has intact enzymatic activity, but unfolds more quickly and has diminished conformational stability relative to native RNase A. These data indicate that hydrogen-bonding pattern merits careful consideration in the selection of beneficial reverse-turn surrogates. Copyright © 2012 The Protein Society.

  4. Argan oil improves surrogate markers of CVD in humans.

    Science.gov (United States)

    Sour, Souad; Belarbi, Meriem; Khaldi, Darine; Benmansour, Nassima; Sari, Nassima; Nani, Abdelhafid; Chemat, Farid; Visioli, Francesco

    2012-06-01

    Limited - though increasing - evidence suggests that argan oil might be endowed with potential healthful properties, mostly in the areas of CVD and prostate cancer. We sought to comprehensively determine the effects of argan oil supplementation on the plasma lipid profile and antioxidant status of a group of healthy Algerian subjects, compared with matched controls. A total of twenty healthy subjects consumed 15 g/d of argan oil - with toasted bread - for breakfast, during 4 weeks (intervention group), whereas twenty matched controls followed their habitual diet, but did not consume argan oil. The study lasted 30 d. At the end of the study, argan oil-supplemented subjects exhibited higher plasma vitamin E concentrations, lower total and LDL-cholesterol, lower TAG and improved plasma and cellular antioxidant profile, when compared with controls. In conclusion, we showed that Algerian argan oil is able to positively modulate some surrogate markers of CVD, through mechanisms which warrant further investigation.

  5. Cholesterol paradox: a correlate does not a surrogate make.

    Science.gov (United States)

    DuBroff, Robert

    2017-03-01

    The global campaign to lower cholesterol by diet and drugs has failed to thwart the developing pandemic of coronary heart disease around the world. Some experts believe this failure is due to the explosive rise in obesity and diabetes, but it is equally plausible that the cholesterol hypothesis, which posits that lowering cholesterol prevents cardiovascular disease, is incorrect. The recently presented ACCELERATE trial dumbfounded many experts by failing to demonstrate any cardiovascular benefit of evacetrapib despite dramatically lowering low-density lipoprotein cholesterol and raising high-density lipoprotein cholesterol in high-risk patients with coronary disease. This clinical trial adds to a growing volume of knowledge that challenges the validity of the cholesterol hypothesis and the utility of cholesterol as a surrogate end point. Inadvertently, the cholesterol hypothesis may have even contributed to this pandemic. This perspective critically reviews this evidence and our reluctance to acknowledge contradictory information.

  6. Technological advances in suspended-sediment surrogate monitoring

    Science.gov (United States)

    Gray, John R.; Gartner, Jeffrey W.

    2009-01-01

    Surrogate technologies to continuously monitor suspended sediment show promise toward supplanting traditional data collection methods requiring routine collection and analysis of water samples. Commercially available instruments operating on bulk optic (turbidity), laser optic, pressure difference, and acoustic backscatter principles are evaluated based on cost, reliability, robustness, accuracy, sample volume, susceptibility to biological fouling, and suitable range of mass concentration and particle size distribution. In situ turbidimeters are widely used. They provide reliable data where the point measurements can be reliably correlated to the river's mean cross section concentration value, effects of biological fouling can be minimized, and concentrations remain below the sensor's upper measurement limit. In situ laser diffraction instruments have similar limitations and can cost 6 times the approximate $5000 purchase price of a turbidimeter. However, laser diffraction instruments provide volumetric-concentration data in 32 size classes. Pressure differential instruments measure mass density in a water column, thus integrating substantially more streamflow than a point measurement. They are designed for monitoring medium-to-large concentrations, are generally unaffected by biological fouling, and cost about the same as a turbidimeter. However, their performance has been marginal in field applications. Acoustic Doppler profilers use acoustic backscatter to measure suspended sediment concentrations in orders of magnitude more streamflow than do instruments that rely on point measurements. The technology is relatively robust and generally immune to effects of biological fouling. Cost of a single-frequency device is about double that of a turbidimeter. Multifrequency arrays also provide the potential to resolve concentrations by clay silt versus sand size fractions. Multifrequency hydroacoustics shows the most promise for revolutionizing collection of continuous

  7. Effectiveness of chitosan on the inactivation of enteric viral surrogates.

    Science.gov (United States)

    Davis, Robert; Zivanovic, Svetlana; D'Souza, Doris H; Davidson, P Michael

    2012-10-01

    Chitosan is known to have bactericidal and antifungal activity. Although human noroviruses are the leading cause of non-bacterial gastroenteritis, information on the efficacy of chitosan against foodborne viruses is very limited. The objective of this work was to determine the effectiveness of different molecular weight chitosans against the cultivable human norovirus and enteric virus surrogates, feline calicivirus, FCV-F9, murine norovirus, MNV-1, and bacteriophages, MS2 and phiX174. Five purified chitosans (53, 222, 307, 421, ~1150 kDa) were dissolved in water, 1% acetic acid, or aqueous HCl pH = 4.3, sterilized by membrane filtration, and mixed with equal volume of virus to obtain a final concentration of 0.7% chitosan and 5 log(10) PFU/ml virus. Virus-chitosan suspensions were incubated for 3 h at 37 °C. Untreated viruses in PBS, in PBS with acetic acid, and in PBS with HCl were tested as controls. Each experiment was run in duplicate and replicated at least twice. Water-soluble chitosan (53 kDa) reduced phiX174, MS2, FCV-F9 and MNV-1 titers by 0.59, 2.44, 3.36, and 0.34 log(10) PFU/ml respectively. Chitosans in acetic acid decreased phiX174 by 1.19-1.29, MS2 by 1.88-5.37, FCV-F9 by 2.27-2.94, and MNV-1 by 0.09-0.28 log(10) PFU/ml, respectively. Increasing the MW of chitosan corresponded with an increasing antiviral effect on MS2, but did not appear to play a role for the other three tested viral surrogates. Overall, chitosan treatments showed the greatest reduction for FCV-F9, and MS2 followed by phiX174, and with no significant effect on MNV-1.

  8. Pan masala advertisements are surrogate for tobacco products

    Directory of Open Access Journals (Sweden)

    Sushma C

    2005-01-01

    Full Text Available BACKGROUND: Pan masala is a comparatively recent habit in India and is marketed with and without tobacco. Advertisements of tobacco products have been banned in India since 1st May 2004. The advertisements of plain pan masala, which continue in Indian media, have been suspected to be surrogate for tobacco products bearing the same name. The study was carried out to assess whether these advertisements were for the intended product, or for tobacco products with same brand name. MATERIALS AND METHODS: The programme of a popular television Hindi news channel was watched for a 24-h period. Programmes on the same channel and its English counterpart were watched on different days to assess whether the advertisements were repeated. The total duration of telecast of a popular brand of plain pan masala (Pan Parag was multiplied by the rate charged by the channel to provide the cost of advertisement of this product. The total sale value of the company was multiplied by the proportion of usage of plain pan masala out of gutka plus pan masala habit as observed from a different study, to provide the annual sale value of plain pan masala product under reference. RESULTS: The annual sale value of plain Pan Parag was estimated to be Rs. 67.1 million. The annual cost of the advertisement of the same product on two television channels was estimated at Rs. 244.6 million. CONCLUSION: The advertisements of plain pan masala seen on Indian television are a surrogate for the tobacco products bearing the same name.

  9. Californium Recovery from Palladium Wire

    Energy Technology Data Exchange (ETDEWEB)

    Burns, Jon D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2014-08-01

    The recovery of 252Cf from palladium-252Cf cermet wires was investigated to determine the feasibility of implementing it into the cermet wire production operation at Oak Ridge National Laboratory’s Radiochemical Engineering Development Center. The dissolution of Pd wire in 8 M HNO3 and trace amounts of HCl was studied at both ambient and elevated temperatures. These studies showed that it took days to dissolve the wire at ambient temperature and only 2 hours at 60°C. Adjusting the ratio of the volume of solvent to the mass of the wire segment showed little change in the kinetics of dissolution, which ranged from 0.176 mL/mg down to 0.019 mL/mg. A successful chromatographic separation of 153Gd, a surrogate for 252Cf, from Pd was demonstrated using AG 50x8 cation exchange resin with a bed volume of 0.5 mL and an internal diameter of 0.8 cm.

  10. Californium Recovery from Palladium Wire

    Energy Technology Data Exchange (ETDEWEB)

    Burns, Jon D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2014-08-01

    The recovery of 252Cf from palladium-252Cf cermet wires was investigated to determine the feasibility of implementing it into the cermet wire production operation at Oak Ridge National Laboratory’s Radiochemical Engineering Development Center. The dissolution of Pd wire in 8 M HNO3 and trace amounts of HCl was studied at both ambient and elevated temperatures. These studies showed that it took days to dissolve the wire at ambient temperature and only 2 hours at 60°C. Adjusting the ratio of the volume of solvent to the mass of the wire segment showed little change in the kinetics of dissolution, which ranged from 0.176 mL/mg down to 0.019 mL/mg. A successful chromatographic separation of 153Gd, a surrogate for 252Cf, from Pd was demonstrated using AG 50x8 cation exchange resin with a bed volume of 0.5 mL and an internal diameter of 0.8 cm.

  11. Learning image based surrogate relevance criterion for atlas selection in segmentation

    Science.gov (United States)

    Zhao, Tingting; Ruan, Dan

    2016-06-01

    Picking geometrically relevant atlases from the whole training set is crucial to multi-atlas based image segmentation, especially with extensive data of heterogeneous quality in the Big Data era. Unfortunately, there is very limited understanding of how currently used image similarity criteria reveal geometric relevance, let alone the optimization of them. This paper aims to develop a good image based surrogate relevance criterion to best reflect the underlying inaccessible geometric relevance in a learning context. We cast this surrogate learning problem into an optimization framework, by encouraging the image based surrogate to behave consistently with geometric relevance during training. In particular, we desire a criterion to be small for image pairs with similar geometry and large for those with significantly different segmentation geometry. Validation experiments on corpus callosum segmentation demonstrate the improved quality of the learned surrogate compared to benchmark surrogate candidates.

  12. A computational methodology for formulating gasoline surrogate fuels with accurate physical and chemical kinetic properties

    KAUST Repository

    Ahmed, Ahfaz

    2015-03-01

    Gasoline is the most widely used fuel for light duty automobile transportation, but its molecular complexity makes it intractable to experimentally and computationally study the fundamental combustion properties. Therefore, surrogate fuels with a simpler molecular composition that represent real fuel behavior in one or more aspects are needed to enable repeatable experimental and computational combustion investigations. This study presents a novel computational methodology for formulating surrogates for FACE (fuels for advanced combustion engines) gasolines A and C by combining regression modeling with physical and chemical kinetics simulations. The computational methodology integrates simulation tools executed across different software platforms. Initially, the palette of surrogate species and carbon types for the target fuels were determined from a detailed hydrocarbon analysis (DHA). A regression algorithm implemented in MATLAB was linked to REFPROP for simulation of distillation curves and calculation of physical properties of surrogate compositions. The MATLAB code generates a surrogate composition at each iteration, which is then used to automatically generate CHEMKIN input files that are submitted to homogeneous batch reactor simulations for prediction of research octane number (RON). The regression algorithm determines the optimal surrogate composition to match the fuel properties of FACE A and C gasoline, specifically hydrogen/carbon (H/C) ratio, density, distillation characteristics, carbon types, and RON. The optimal surrogate fuel compositions obtained using the present computational approach was compared to the real fuel properties, as well as with surrogate compositions available in the literature. Experiments were conducted within a Cooperative Fuels Research (CFR) engine operating under controlled autoignition (CAI) mode to compare the formulated surrogates against the real fuels. Carbon monoxide measurements indicated that the proposed surrogates

  13. Evaluation of the biofidelity of the HIII and MIL-Lx lower leg surrogates under axial impact loading.

    Science.gov (United States)

    Quenneville, Cheryl E; Dunning, Cynthia E

    2012-01-01

    Lower leg injury risk is commonly assessed using an anthropomorphic test device (ATD). The current standard leg (the HIII) has been shown to have low biofidelity due to its geometry and material properties. A new surrogate (the MIL-Lx) was developed to address these issues, specifically for anti-vehicular mine blast scenarios but with potential applications to high-force crashes in the automotive industry. Before it is adopted for use, the MIL-Lx must be evaluated under impact loading to ensure that it represents the natural lower leg response. Axial impact loads were applied to both the HIII and the MIL-Lx at impact velocities of 2 to 7 m/s using a pneumatic impacting device. Testing was also conducted with the foot removed from both surrogates to enable comparison with previous tests of isolated cadaveric tibias at noninjurious and injurious (i.e., fracture) levels. To evaluate the effect of a boot on load attenuation, the HIII was impacted with and without a hiking boot. Forces in the MIL-Lx were between 25 and 100 percent of those in the HIII (depending on impact conditions). The use of a boot reduced the peak force by approximately 65 percent at the highest impact velocities. The MIL-Lx fit the data from noninjurious cadaveric tibia tests with R(2) = 0.83. The MIL-Lx is a new surrogate that represents the response of the natural tibia under axial impact loading better than the HIII. The inclusion of a boot has a significant effect on loads in the leg and may influence injury assessment results. The MIL-Lx will be a useful tool for predicting lower leg injury risk over a wide range of impact velocities.

  14. Definitions and validation criteria for biomarkers and surrogate endpoints: development and testing of a quantitative hierarchical levels of evidence schema

    DEFF Research Database (Denmark)

    Lassere, Marissa N; Johnson, Kent R; Boers, Maarten

    2007-01-01

    of the National Institutes of Health definitions of biomarker, surrogate endpoint, and clinical endpoint was useful. CONCLUSION: Further development and application of this schema provides incentives and guidance for effective biomarker and surrogate endpoint research, and more efficient drug discovery...... endpoints, and leading indicators, a quantitative surrogate validation schema was developed and subsequently evaluated at a stakeholder workshop. RESULTS: The search identified several classification schema and definitions. Components of these were incorporated into a new quantitative surrogate validation...

  15. Physostigmine in recovery from anaesthesia.

    Science.gov (United States)

    Hamilton-Davies, C; Bailie, R; Restall, J

    1995-05-01

    Intravenous ketamine anaesthesia has been used by the British army in the field for many years. A recognised problem has been the unpredictable recovery profile this produces. We anaesthetised 28 ASA 1 patients using a standard British military technique. At termination of the anaesthetic, half of the patients were given a physostigmine/glycopyrronium mixture and half were given the equivalent volume of saline 0.9%. There was a significant difference between the two groups with regard to recovery times (p < 0.001). There was no significant difference with regard to other variables. In trauma anaesthesia the improved recovery profile from the use of physostigmine following ketamine anaesthesia may lead to earlier evacuation of the patient.

  16. A general framework to learn surrogate relevance criterion for atlas based image segmentation

    Science.gov (United States)

    Zhao, Tingting; Ruan, Dan

    2016-09-01

    Multi-atlas based image segmentation sees great opportunities in the big data era but also faces unprecedented challenges in identifying positive contributors from extensive heterogeneous data. To assess data relevance, image similarity criteria based on various image features widely serve as surrogates for the inaccessible geometric agreement criteria. This paper proposes a general framework to learn image based surrogate relevance criteria to better mimic the behaviors of segmentation based oracle geometric relevance. The validity of its general rationale is verified in the specific context of fusion set selection for image segmentation. More specifically, we first present a unified formulation for surrogate relevance criteria and model the neighborhood relationship among atlases based on the oracle relevance knowledge. Surrogates are then trained to be small for geometrically relevant neighbors and large for irrelevant remotes to the given targets. The proposed surrogate learning framework is verified in corpus callosum segmentation. The learned surrogates demonstrate superiority in inferring the underlying oracle value and selecting relevant fusion set, compared to benchmark surrogates.

  17. A general framework to learn surrogate relevance criterion for atlas based image segmentation.

    Science.gov (United States)

    Zhao, Tingting; Ruan, Dan

    2016-09-07

    Multi-atlas based image segmentation sees great opportunities in the big data era but also faces unprecedented challenges in identifying positive contributors from extensive heterogeneous data. To assess data relevance, image similarity criteria based on various image features widely serve as surrogates for the inaccessible geometric agreement criteria. This paper proposes a general framework to learn image based surrogate relevance criteria to better mimic the behaviors of segmentation based oracle geometric relevance. The validity of its general rationale is verified in the specific context of fusion set selection for image segmentation. More specifically, we first present a unified formulation for surrogate relevance criteria and model the neighborhood relationship among atlases based on the oracle relevance knowledge. Surrogates are then trained to be small for geometrically relevant neighbors and large for irrelevant remotes to the given targets. The proposed surrogate learning framework is verified in corpus callosum segmentation. The learned surrogates demonstrate superiority in inferring the underlying oracle value and selecting relevant fusion set, compared to benchmark surrogates.

  18. Field-scale evaluation of the co-transport impacts of Bacillus subtilis endospores on other pathogen surrogates

    Science.gov (United States)

    Stimson, J. R.; Chik, A. H.; Mesquita, M. M.; McLellan, N. L.; Emelko, M.

    2009-12-01

    spores (TAS) occurred in the native groundwater at an average concentration of 1.4 x 10-1 ± 5.9 x 10-2 (n = 21) spore mL-1. When B. subtilis endospores were injected at a concentration of 6.7 x 104 spores mL-1, TAS recovery at the extraction well exceeded natural levels by ~1-log. The increase in TAS concentration is attributed to B. subtilis spore injection. The removal of 1.5 µm microspheres was increased from ~7-log in the absence of injected B. subtilis spores to ~8-log in the presence of the spores. The increased microsphere removal when spores were present was presumably due to spore-microsphere aggregation and/or the enhanced co-attachment of microspheres and spores to mineral surfaces. This observed surrogate interaction must be considered in studies where more than one tracer is employed to estimate removal efficiency of riverbank filtration systems. An additional field-scale co-transport study, examining Bacillus spore interaction with E. coli and bacteriophage PRD-1, will be conducted to assess the degree of interference observed with other biocolloids.

  19. Utility of serum ferritin and lactate dehydrogenase as surrogate markers for steroid therapy for Mycoplasma pneumoniae pneumonia.

    Science.gov (United States)

    Kawamata, Ryou; Yokoyama, Koji; Sato, Miori; Goto, Masahide; Nozaki, Yasuyuki; Takagi, Takeshi; Kumagai, Hideki; Yamagata, Takanori

    2015-11-01

    Patients with severe mycoplasma pneumonia having very high serum interleukin-18 levels may require systemic corticosteroid treatment. However, we know of no laboratory markers that have been identified to assess the precise severity of Mycoplasma pneumoniae pneumonia. Thus, we investigated the usefulness of four clinical laboratory tests as severity indicators and surrogate markers for initiation of steroid therapy in these patients. For 22 Japanese children (including 3 patients who needed systemic corticosteroid therapy) diagnosed with Mycoplasma pneumoniae pneumonia, white blood cell counts and serum concentrations of interleukin-18, C-reactive protein, lactate dehydrogenase, and ferritin were determined in the acute and recovery phases. In total, 8 and 14 patients were classified as moderate and mild pneumonia, respectively, according to clinical manifestations. The serum interleukin-18 level in the acute phase of the pneumonia group was significantly higher than that of age-matched controls. Furthermore, serum interleukin-18, lactate dehydrogenase and ferritin levels in the acute phase increased in parallel with the severity of the pneumonia. The serum ferritin level was also higher in the acute phase than in the recovery phase. Positive correlations between the levels of serum interleukin-18, lactate dehydrogenase and ferritin were observed in the acute phase. Serum lactate dehydrogenase and ferritin levels may be useful as indicators of the severity of pediatric Mycoplasma pneumoniae pneumonia for initiation of corticosteroid therapy. Copyright © 2015 Japanese Society of Chemotherapy and The Japanese Association for Infectious Diseases. Published by Elsevier Ltd. All rights reserved.

  20. Composite sampling of a Bacillus anthracis surrogate with cellulose sponge surface samplers from a nonporous surface.

    Directory of Open Access Journals (Sweden)

    Jenia A M Tufts

    Full Text Available A series of experiments was conducted to explore the utility of composite-based collection of surface samples for the detection of a Bacillus anthracis surrogate using cellulose sponge samplers on a nonporous stainless steel surface. Two composite-based collection approaches were evaluated over a surface area of 3716 cm2 (four separate 929 cm2 areas, larger than the 645 cm2 prescribed by the standard Centers for Disease Control (CDC and Prevention cellulose sponge sampling protocol for use on nonporous surfaces. The CDC method was also compared to a modified protocol where only one surface of the sponge sampler was used for each of the four areas composited. Differences in collection efficiency compared to positive controls and the potential for contaminant transfer for each protocol were assessed. The impact of the loss of wetting buffer from the sponge sampler onto additional surface areas sampled was evaluated. Statistical tests of the results using ANOVA indicate that the collection of composite samples using the modified sampling protocol is comparable to the collection of composite samples using the standard CDC protocol (p  =  0.261. Most of the surface-bound spores are collected on the first sampling pass, suggesting that multiple passes with the sponge sampler over the same surface may be unnecessary. The effect of moisture loss from the sponge sampler on collection efficiency was not significant (p  =  0.720 for both methods. Contaminant transfer occurs with both sampling protocols, but the magnitude of transfer is significantly greater when using the standard protocol than when the modified protocol is used (p<0.001. The results of this study suggest that composite surface sampling, by either method presented here, could successfully be used to increase the surface area sampled per sponge sampler, resulting in reduced sampling times in the field and decreased laboratory processing cost and turn-around times.

  1. Fish fins as non-lethal surrogates for muscle tissues in freshwater food web studies using stable isotopes.

    Science.gov (United States)

    Hette Tronquart, Nicolas; Mazeas, Laurent; Reuilly-Manenti, Liana; Zahm, Amandine; Belliard, Jérôme

    2012-07-30

    Dorsal white muscle is the standard tissue analysed in fish trophic studies using stable isotope analyses. However, sampling white muscle often implies the sacrifice of fish. Thus, we examined whether the non-lethal sampling of fin tissue can substitute muscle sampling in food web studies. Analysing muscle and fin δ(15)N and δ(13)C values of 466 European freshwater fish (14 species) with an elemental analyser coupled with an isotope ratio mass spectrometer, we compared the isotope values of the two tissues. Correlations between fin and muscle isotope ratios were examined for all fish together and specifically for 12 species. We further proposed four methods of assessing muscle from fin isotope ratios and estimated the errors made using these muscle surrogates. Despite significant differences between isotope values of the two tissues, fin and muscle isotopic signals are strongly correlated. Muscle values, estimated with raw fin isotope ratios (1st method), induce an error of ca. 1‰ for both isotopes. In comparison, specific (2nd method) or general (3rd method) correlations provide meaningful corrections of fin isotope ratios (errors muscle estimates (errors >0.8‰). There is little chance that a global model can be created. However, the 2nd and 3rd methods of estimating muscle values from fin isotope ratios should provide an acceptable level of error for the studies of European freshwater food web. We thus recommend that future studies use fin tissue as a non-lethal surrogate for muscle. Copyright © 2012 John Wiley & Sons, Ltd.

  2. Assessing the potential of surrogate EPS to mimic natural biofilm mechanical properties

    Science.gov (United States)

    Thom, Moritz; Schimmels, Stefan

    2017-04-01

    Biofilms growing on benthic sediments may increase the resistance towards erosion considerably by the sticky nature of extracellular polymeric substances (EPS). The EPS is a biopolymer which is secreted by the microorganisms inhabiting the biofilm matrix and may be regarded as natural glue. However, laboratory studies on the biostabilization effect mediated by biofilms are often hampered by the unavailability of "environmental" flumes in which light intensities, water temperature and nutrient content can be controlled. To allow investigations on biostabilization in "traditional" flume settings the use of surrogate materials is studied. Another advantage of using appropriate surrogates is the potential to reduce the experimental time, as compared to cultivating natural biofilms, the surrogates can readily be designed to mimic biofilms at different growth stages. Furthermore, the use of surrogates which are expected to have more homogeneous mechanical properties could facilitate fundamental studies to improve our knowledge on biostabilization. Even though a number of studies have already utilized EPS surrogates it is not clear how to mix them to correctly mimic natural EPS mechanical properties. In this study the adhesiveness (a measure of stickiness) on the surface of several EPS surrogates (e.g. Xanthan Gum, sodium alginate) is measured. These surrogates which are originally used in the food industry as rheology modifiers are mixed by adding water to a powder at a desired concentration (C). The measured surface adhesion of different surrogates at different concentrations ranged from 0.5 to 6.7 N/m2, which is well in line with values found for laboratory cultured biofilms. We found that the surrogate characteristics differed largely especially in regard to a) the response of the adhesiveness to increased concentrations (powder to water) and b) in their rheological characteristics. A seemingly promising surrogate for the use in biostabilization studies is Xanthan Gum

  3. Children of surrogate mothers: psychological well-being, family relationships and experiences of surrogacy.

    Science.gov (United States)

    Jadva, V; Imrie, S

    2014-01-01

    What impact does surrogacy have on the surrogates' own children? The children of surrogate mothers do not experience any negative consequences as a result of their mother's decision to be a surrogate, irrespective of whether or not the surrogate uses her own egg. Participants were recruited as part of a study of the long-term effects of surrogacy for surrogates and their family members. Data were collected from 36 children of surrogates at a single time point. Participants whose mother had been a surrogate 5-15 years prior to interview and who were aged over 12 years were eligible to take part. Thirty-six participants (14 male and 22 female) aged 12-25 years were interviewed (response rate = 52%). Questionnaires assessing psychological health and family functioning were administered. Forty-four per cent (15) of participants' mothers had undergone gestational surrogacy, 39% (14) had used their own egg (genetic surrogacy) and 19% (7) had completed both types of surrogacy. Most surrogates' children (86%, 31) had a positive view of their mother's surrogacy. Forty-seven per cent (17) of children were in contact with the surrogacy child and all reported good relationships with him/her. Forty per cent (14) of children referred to the child as a sibling or half-sibling and this did not differ between genetic and gestational surrogacy. Most children (89%, 32), reported a positive view of family life, with all enjoying spending time with their mother. Mean scores on the questionnaire assessments of psychological health and self-esteem were within the normal range and did not differ by surrogacy type. The sample size for this study was relatively small and not all children chose to take part, therefore their views cannot be known. Nevertheless, this is the first study to assess the experiences of surrogacy from the perspective of the surrogates' own children. There may be some bias from the inclusion of siblings from the same family. Findings of this study show that family

  4. Efficient Calibration of Computationally Intensive Groundwater Models through Surrogate Modelling with Lower Levels of Fidelity

    Science.gov (United States)

    Razavi, S.; Anderson, D.; Martin, P.; MacMillan, G.; Tolson, B.; Gabriel, C.; Zhang, B.

    2012-12-01

    Many sophisticated groundwater models tend to be computationally intensive as they rigorously represent detailed scientific knowledge about the groundwater systems. Calibration (model inversion), which is a vital step of groundwater model development, can require hundreds or thousands of model evaluations (runs) for different sets of parameters and as such demand prohibitively large computational time and resources. One common strategy to circumvent this computational burden is surrogate modelling which is concerned with developing and utilizing fast-to-run surrogates of the original computationally intensive models (also called fine models). Surrogates can be either based on statistical and data-driven models such as kriging and neural networks or simplified physically-based models with lower fidelity to the original system (also called coarse models). Fidelity in this context refers to the degree of the realism of a simulation model. This research initially investigates different strategies for developing lower-fidelity surrogates of a fine groundwater model and their combinations. These strategies include coarsening the fine model, relaxing the numerical convergence criteria, and simplifying the model geological conceptualisation. Trade-offs between model efficiency and fidelity (accuracy) are of special interest. A methodological framework is developed for coordinating the original fine model with its lower-fidelity surrogates with the objective of efficiently calibrating the parameters of the original model. This framework is capable of mapping the original model parameters to the corresponding surrogate model parameters and also mapping the surrogate model response for the given parameters to the original model response. This framework is general in that it can be used with different optimization and/or uncertainty analysis techniques available for groundwater model calibration and parameter/predictive uncertainty assessment. A real-world computationally

  5. Thermal inactivation of Bacillus anthracis surrogate spores in a bench-scale enclosed landfill gas flare.

    Science.gov (United States)

    Tufts, Jenia A McBrian; Rosati, Jacky A

    2012-02-01

    A bench-scale landfill flare system was designed and built to test the potential for landfilled biological spores that migrate from the waste into the landfill gas to pass through the flare and exit into the environment as viable. The residence times and temperatures of the flare were characterized and compared to full-scale systems. Geobacillus stearothermophilus and Bacillus atrophaeus, nonpathogenic spores that may serve as surrogates for Bacillus anthracis, the causative agent for anthrax, were investigated to determine whether these organisms would be inactivated or remain viable after passing through a simulated landfill flare. High concentration spore solutions were aerosolized, dried, and sent through a bench-scale system to simulate the fate of biological weapon (BW)-grade spores in a landfill gas flare. Sampling was conducted downstream of the flare using a bioaerosol collection device containing sterile white mineral oil. The samples were cultured, incubated for seven days, and assessed for viability. Results showed that the bench-scale system exhibited good similarity to the real-world conditions of an enclosed standard combustor flare stack with a single orifice, forced-draft diffusion burner. All spores of G. stearothermophilus and B. atrophaeus were inactivated in the flare, indicating that spores that become re-entrained in landfill gas may not escape the landfill as viable, apparently becoming completely inactivated as they exit through a landfill flare.

  6. Numerical Surrogates for Human Observers in Myocardial Motion Evaluation From SPECT Images.

    Science.gov (United States)

    Marin, Thibault; Kalayeh, Mahdi M; Parages, Felipe M; Brankov, Jovan G

    2014-01-01

    In medical imaging, the gold standard for image-quality assessment is a task-based approach in which one evaluates human observer performance for a given diagnostic task (e.g., detection of a myocardial perfusion or motion defect). To facilitate practical task-based image-quality assessment, model observers are needed as approximate surrogates for human observers. In cardiac-gated SPECT imaging, diagnosis relies on evaluation of the myocardial motion as well as perfusion. Model observers for the perfusion-defect detection task have been studied previously, but little effort has been devoted toward development of a model observer for cardiac-motion defect detection. In this work, we describe two model observers for predicting human observer performance in detection of cardiac-motion defects. Both proposed methods rely on motion features extracted using previously reported deformable mesh model for myocardium motion estimation. The first method is based on a Hotelling linear discriminant that is similar in concept to that used commonly for perfusion-defect detection. In the second method, based on relevance vector machines (RVM) for regression, we compute average human observer performance by first directly predicting individual human observer scores, and then using multi reader receiver operating characteristic analysis. Our results suggest that the proposed RVM model observer can predict human observer performance accurately, while the new Hotelling motion-defect detector is somewhat less effective.

  7. Latex Rubber Gloves as a Sampling Dosimeter Using a Novel Surrogate Sampling Device.

    Science.gov (United States)

    Sankaran, Gayatri; Lopez, Terry; Ries, Steve; Ross, John; Vega, Helen; Eastmond, David A; Krieger, Robert I

    2015-01-01

    Pesticide exposure during harvesting of crops occurs primarily to the workers' hands. When harvesters wear latex rubber gloves for personal safety and hygiene harvesting reasons, gloves accumulate pesticide residues. Hence, characterization of the gloves' properties may be useful for pesticide exposure assessments. Controlled field studies were conducted using latex rubber gloves to define the factors that influence the transfer of pesticides to the glove and that would affect their use as a residue monitoring device. A novel sampling device called the Brinkman Contact Transfer Unit (BCTU) was constructed to study the glove characteristics and residue transfer and accumulation under controlled conditions on turf. The effectiveness of latex rubber gloves as sampling dosimeters was evaluated by measuring the transferable pesticide residues as a function of time. The validation of latex rubber gloves as a residue sampling dosimeter was performed by comparing pesticide transfer and dissipation from the gloves, with the turf transferable residues sampled using the validated California (CA) Roller, a standard measure of residue transfer. The observed correlation (Pearson's correlation coefficient R(2)) between the two methods was .84 for malathion and .96 for fenpropathrin, indicating that the BCTU is a useful, reliable surrogate tool for studying available residue transfer to latex rubber gloves under experimental conditions. Perhaps more importantly, these data demonstrate that latex gloves worn by workers may be useful quantifiable matrices for measuring pesticide exposure.

  8. Effectiveness of amphibians as biodiversity surrogates in pond conservation.

    Science.gov (United States)

    Ilg, Christiane; Oertli, Beat

    2017-04-01

    Amphibian decline has led to worldwide conservation efforts, including the identification and designation of sites for their protection. These sites could also play an important role in the conservation of other freshwater taxa. In 89 ponds in Switzerland, we assessed the effectiveness of amphibians as a surrogate for 4 taxonomic groups that occur in the same freshwater ecosystems as amphibians: dragonflies, aquatic beetles, aquatic gastropods, and aquatic plants. The ponds were all of high value for amphibian conservation. Cross-taxon correlations were tested for species richness and conservation value, and Mantel tests were used to investigate community congruence. Species richness, conservation value, and community composition of amphibians were weakly congruent with these measures for the other taxonomic groups. Paired comparisons for the 5 groups considered showed that for each metric, amphibians had the lowest degree of congruence. Our results imply that site designation for amphibian conservation will not necessarily provide protection for freshwater biodiversity as a whole. To provide adequate protection for freshwater species, we recommend other taxonomic groups be considered in addition to amphibians in the prioritization and site designation process. © 2016 Society for Conservation Biology.

  9. Numerical investigation for erratic behavior of Kriging surrogate model

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, Hyun Gil; Yi, Seul Gi [KAIST, Daejeon (Korea, Republic of); Choi, Seong Im [Virginia Polytechnic Institute and State University, Blacksburg (United States)

    2014-09-15

    Kriging model is one of popular spatial/temporal interpolation models in engineering field since it could reduce the time resources for the expensive analysis. But generation of the Kriging model is hardly a sinecure because internal semi-variogram structure of the Kriging often reveals numerically unstable or erratic behaviors. In present study, the issues in the maximum likelihood estimation which are the vital-parts of the construction of the Kriging model, is investigated. These issues are divided into two aspects; Issue I is for the erratic response of likelihood function itself, and Issue II is for numerically unstable behaviors in the correlation matrix. For both issues, studies for specific circumstances which might raise the issue, and the reason of that are conducted. Some practical ways further are suggested to cope with them. Furthermore, the issue is studied for practical problem; aerodynamic performance coefficients of two-dimensional airfoil predicted by CFD analysis. Result shows that such erratic behavior of Kriging surrogate model can be effectively resolved by proposed solution. In conclusion, it is expected this paper could be helpful to prevent such an erratic and unstable behavior.

  10. Protected Gold Nanoparticles with Thioethers and Amines As Surrogate Ligands

    Directory of Open Access Journals (Sweden)

    M. Rafiq H. Siddiqui

    2013-01-01

    Full Text Available Dodecyl sulfide, dodecyl amine, and hexylamine were shown to act as surrogate ligands (L via metastable gold nanoparticles. By collating analytical and spectroscopic data obtained simultaneously, empirical formula Au24L was assigned. These impurity-free nanoparticles obtained in near quantitative yields showing exceptional gold assays (up to 98%Au were prepared by a modification of the two-phase method. Replacement reactions on the Au24L showed that Au:L ratios may be increased (up to Au55:L (L= (H25C122S or decreased (Au12:L (L= H2NC12H25 and H2NC6H13 as desired. This work encompassing the role of analytical techniques used, that is, elemental analysis, variable temperature 1H NMR, FAB mass spectrometry, UV-Vis spectroscopy, thin film X-ray diffraction, and high-resolution electron microscopy (HREM has implications in the study of size control, purity, stability, and metal assays of gold nanoparticles.

  11. Investigation of ethosomes as surrogate carriers for bioactives

    Directory of Open Access Journals (Sweden)

    Devina Verma

    2016-01-01

    Full Text Available Background: Ethosomal vesicular system delivering a bioactive phytochemical, chrysin, was developed for transdermal delivery to increase its permeability and penetrability. Materials and Methods: Ethosomal system was optimized by keeping lecithin and ethanol concentration as independent variable while size and size distribution were taken as dependent variables. The optimized formulation was then subjected to various in vitro characterization parameters. Results: Ethosomal vesicle with an optimum size and polydispersity index of 134 ± 35 nm and 0.153, respectively, and entrapment efficiency of 80.05 ± 2.6% was considered as optimized and subjected to characterization. The scanning electron microscopy and transmission electron microscopy showed spherical entities with uniform surface whereas in vitro permeation and retention study showed the sustained mode of drug release and better skin retention as compared to hydroethanolic solution of the drug. The confocal laser scanning microscopy study reiterated high penetrability of vesicles into the skin. Histopathological and Fourier transform infrared spectroscopy analysis revealed its mechanism of penetration. Conclusion : The study thus demonstrated the ability of the ethosomal vesicles as surrogate carriers for delivery of bioactive agents through the skin for better amelioration of skin inflammation and other diseases.

  12. Virucidal activity of a quaternary ammonium compound disinfectant against feline calicivirus: a surrogate for norovirus.

    Science.gov (United States)

    Jimenez, Luis; Chiang, Michael

    2006-06-01

    Norovirus, formerly known as Norwalk virus, is an important cause of gastroenteritis outbreaks in hospitals, food services, schools, and cruise ships. Infection control practices by using disinfectants to eliminate noroviruses from surfaces and environmental samples reduce the morbidity and spread of virus outbreaks. There are not many commercial disinfectants effective against norovirus. Noroviruses cannot be cultivated in vitro. However, feline calicivirus can be used as a surrogate to determine disinfectant efficacy against noroviruses. Feline calicivirus was used in a virucidal effectiveness test protocol as a surrogate for norovirus to determine the virucidal efficacy of R-82, a quaternary ammonium compound disinfectant cleaner. Feline calicivirus suspensions containing at least 5% fetal bovine serum were dried on carriers and treated with 1:256 dilutions of R-82 disinfectant in water, with a hardness of 400 ppm as calcium carbonate, for 10 minutes. Hypochlorite concentrations of 100 +/- 10 and 1,000 +/- 10 ppm, respectively, were also analyzed as internal control standards. After contact period, the test agents were neutralized with 2 mL of appropriate neutralizer, and mixtures were scraped from carrier surfaces with a cell scraper. Selected dilutions of the neutralized inoculum/test agent mixtures were added to cultured cell monolayers of appropriate host cells. Postincubation, the infectious feline calicivirus was scored microscopically by observing virus-specific cytopathic effects produced by replicating infectious virus. The performance criterion was a minimum of 4-log(10) reduction in cytopathic effects of feline calicivirus. After a 10-minute contact time, formulation R-82 diluted 1:256 showed a 6.6- and 6.4-log(10) reductions in cytopathic effects of feline calicivirus during initial and confirmatory testing, respectively, demonstrating complete inactivation of the virus. A hypochlorite solution of 1,000 ppm exhibited similar log(10) reductions to the

  13. WE-G-18C-06: Is Diaphragm Motion a Good Surrogate for Liver Tumor Motion?

    Energy Technology Data Exchange (ETDEWEB)

    Yang, J [Department of Radiation Oncology, Duke University Medical Center, Durham, NC (United States); School of Information Science and Engineering, Shandong University, Jinan, Shandong (China); Cai, J; Zheng, C; Czito, B; Palta, M; Yin, F [Department of Radiation Oncology, Duke University Medical Center, Durham, NC (United States); Wang, H [School of Information Science and Engineering, Shandong University, Jinan, Shandong (China); Bashir, M [Department of Radiology, Duke University Medical Center, Durham, NC (United States)

    2014-06-15

    Purpose: To investigate whether diaphragm motion is a good surrogate for liver tumor motion by comparing their motion trajectories obtained from cine-MRI. Methods: Fourteen patients with hepatocellular carcinoma (10/14) or liver metastases (4/14) undergoing radiation therapy were included in this study. All patients underwent single-slice 2D cine-MRI simulations across the center of the tumor in three orthogonal planes. Tumor and diaphragm motion trajectories in the superior-inferior (SI), anteriorposterior (AP), and medial-lateral (ML) directions were obtained using the normalized cross-correlation based tracking technique. Agreement between tumor and diaphragm motions was assessed by calculating the phase difference percentage (PDP), intra-class correlation coefficient (ICC), Bland-Altman analysis (Diffs) and paired t-test. The distance (D) between tumor and tracked diaphragm area was analyzed to understand its impact on the correlation between tumor and diaphragm motions. Results: Of all patients, the means (±standard deviations) of PDP were 7.1 (±1.1)%, 4.5 (±0.5)% and 17.5 (±4.5)% in the SI, AP and ML directions, respectively. The means of ICC were 0.98 (±0.02), 0.97 (±0.02), and 0.08 (±0.06) in the SI, AP and ML directions, respectively. The Diffs were 2.8 (±1.4) mm, 2.4 (±1.1) mm, and 2.2 (±0.5) mm in the SI, AP and ML directions, respectively. The p-values derived from the paired t-test were < 0.02 in SI and AP directions, whereas were > 0.58 in ML direction primarily due to the small motion in ML direction. Tumor and diaphragmatic motion had high concordance when the distance between the tumor and tracked diaphragm areas was small. Conclusion: Preliminary results showed that liver tumor motion had good correlations with diaphragm motion in the SI and AP directions, indicating diaphragm motion in the SI and AP directions could potentially be a reliable surrogate for liver tumor motion. NIH (1R21CA165384-01A1), Golfers Against Cancer (GAC

  14. Development of a method for bacteria and virus recovery from heating, ventilation, and air conditioning (HVAC) filters.

    Science.gov (United States)

    Farnsworth, James E; Goyal, Sagar M; Kim, Seung Won; Kuehn, Thomas H; Raynor, Peter C; Ramakrishnan, M A; Anantharaman, Senthilvelan; Tang, Weihua

    2006-10-01

    The aim of the work presented here is to study the effectiveness of building air handling units (AHUs) in serving as high volume sampling devices for airborne bacteria and viruses. An HVAC test facility constructed according to ASHRAE Standard 52.2-1999 was used for the controlled loading of HVAC filter media with aerosolized bacteria and virus. Nonpathogenic Bacillus subtilis var. niger was chosen as a surrogate for Bacillus anthracis. Three animal viruses; transmissible gastroenteritis virus (TGEV), avian pneumovirus (APV), and fowlpox virus were chosen as surrogates for three human viruses; SARS coronavirus, respiratory syncytial virus, and smallpox virus; respectively. These bacteria and viruses were nebulized in separate tests and injected into the test duct of the test facility upstream of a MERV 14 filter. SKC Biosamplers upstream and downstream of the test filter served as reference samplers. The collection efficiency of the filter media was calculated to be 96.5 +/- 1.5% for B. subtilis, however no collection efficiency was measured for the viruses as no live virus was ever recovered from the downstream samplers. Filter samples were cut from the test filter and eluted by hand-shaking. An extraction efficiency of 105 +/- 19% was calculated for B. subtilis. The viruses were extracted at much lower efficiencies (0.7-20%). Our results indicate that the airborne concentration of spore-forming bacteria in building AHUs may be determined by analyzing the material collected on HVAC filter media, however culture-based analytical techniques are impractical for virus recovery. Molecular-based identification techniques such as PCR could be used.

  15. Recovery from schizophrenia and the recovery model.

    Science.gov (United States)

    Warner, Richard

    2009-07-01

    The recovery model refers to subjective experiences of optimism, empowerment and interpersonal support, and to a focus on collaborative treatment approaches, finding productive roles for user/consumers, peer support and reducing stigma. The model is influencing service development around the world. This review will assess whether optimism about outcome from serious mental illness and other tenets of the recovery model are borne out by recent research. Remission of symptoms has been precisely defined, but the definition of 'recovery' is a more diffuse concept that includes such factors as being productive and functioning independently. Recent research and a large, earlier body of data suggest that optimism about outcome from schizophrenia is justified. A substantial proportion of people with the illness will recover completely and many more will regain good social functioning. Outcome is better for people in the developing world. Mortality for people with schizophrenia is increasing but is lower in the developing world. Working appears to help people recover from schizophrenia, and recent advances in vocational rehabilitation have been shown to be effective in countries with differing economies and labor markets. A growing body of research supports the concept that empowerment is an important component of the recovery process. Key tenets of the recovery model - optimism about recovery from schizophrenia, the importance of access to employment and the value of empowerment of user/consumers in the recovery process - are supported by the scientific research. Attempts to reduce the internalized stigma of mental illness should enhance the recovery process.

  16. Midwest Surrogate Species and Prairie Reconstruction Funding Final Report, FY 2016

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Final report on funding received from the Natural Resources Program Center to support surrogate species planning and implementation and the Prairie Reconstruction...

  17. Surrogate Models for Online Monitoring and Process Troubleshooting of NBR Emulsion Copolymerization

    Directory of Open Access Journals (Sweden)

    Chandra Mouli R. Madhuranthakam

    2016-03-01

    Full Text Available Chemical processes with complex reaction mechanisms generally lead to dynamic models which, while beneficial for predicting and capturing the detailed process behavior, are not readily amenable for direct use in online applications related to process operation, optimisation, control, and troubleshooting. Surrogate models can help overcome this problem. In this research article, the first part focuses on obtaining surrogate models for emulsion copolymerization of nitrile butadiene rubber (NBR, which is usually produced in a train of continuous stirred tank reactors. The predictions and/or profiles for several performance characteristics such as conversion, number of polymer particles, copolymer composition, and weight-average molecular weight, obtained using surrogate models are compared with those obtained using the detailed mechanistic model. In the second part of this article, optimal flow profiles based on dynamic optimisation using the surrogate models are obtained for the production of NBR emulsions with the objective of minimising the off-specification product generated during grade transitions.

  18. An Efficient Constraint Boundary Sampling Method for Sequential RBDO Using Kriging Surrogate Model

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jihoon; Jang, Junyong; Kim, Shinyu; Lee, Tae Hee [Hanyang Univ., Seoul (Korea, Republic of); Cho, Sugil; Kim, Hyung Woo; Hong, Sup [Korea Research Institute of Ships and Ocean Engineering, Busan (Korea, Republic of)

    2016-06-15

    Reliability-based design optimization (RBDO) requires a high computational cost owing to its reliability analysis. A surrogate model is introduced to reduce the computational cost in RBDO. The accuracy of the reliability depends on the accuracy of the surrogate model of constraint boundaries in the surrogated-model-based RBDO. In earlier researches, constraint boundary sampling (CBS) was proposed to approximate accurately the boundaries of constraints by locating sample points on the boundaries of constraints. However, because CBS uses sample points on all constraint boundaries, it creates superfluous sample points. In this paper, efficient constraint boundary sampling (ECBS) is proposed to enhance the efficiency of CBS. ECBS uses the statistical information of a kriging surrogate model to locate sample points on or near the RBDO solution. The efficiency of ECBS is verified by mathematical examples.

  19. Endospore surface properties of commonly used Bacillus anthracis surrogates vary in aqueous solution

    Science.gov (United States)

    The hydrophobic character and electrophoretic mobility of microorganisms are vital aspects of understanding their interactions with the environment. These properties are fundamental in fate-and-transport, physiological, and virulence studies, and thus integral in surrogate select...

  20. Trimethylsilylethynyl ketones as surrogates for ethynyl ketones in the double Michael reaction.

    Science.gov (United States)

    Holeman, Derrick S; Rasne, Ravindra M; Grossman, Robert B

    2002-05-01

    Trimethylsilylethynyl ketones can be desilylated in the presence of a tethered carbon diacid and induced to undergo a double Michael reaction in situ. The trimethylsilylethynyl ketones can serve as surrogates of ethynyl ketones that are difficult to prepare or isolate.

  1. Significance of Including a Surrogate Arousal for Sleep Apnea-Hypopnea Syndrome Diagnosis by Respiratory Polygraphy

    Science.gov (United States)

    Masa, Juan F.; Corral, Jaime; Gomez de Terreros, Javier; Duran-Cantolla, Joaquin; Cabello, Marta; Hernández-Blasco, Luis; Monasterio, Carmen; Alonso, Alberto; Chiner, Eusebi; Aizpuru, Felipe; Zamorano, Jose; Cano, Ricardo; Montserrat, Jose M.; Garcia-Ledesma, Estefania; Pereira, Ricardo; Cancelo, Laura; Martinez, Angeles; Sacristan, Lirios; Salord, Neus; Carrera, Miguel; Sancho-Chust, José N.; Embid, Cristina

    2013-01-01

    Rationale: Respiratory polygraphy is an accepted alternative to polysomnography (PSG) for sleep apnea/hypopnea syndrome (SAHS) diagnosis, although it underestimates the apnea-hypopnea index (AHI) because respiratory polygraphy cannot identify arousals. Objectives: We performed a multicentric, randomized, blinded crossover study to determine the agreement between home respiratory polygraphy (HRP) and PSG, and between simultaneous respiratory polygraphy (respiratory polygraphy with PSG) (SimultRP) and PSG by means of 2 AHI scoring protocols with or without hyperventilation following flow reduction considered as a surrogate arousal. Methods: We included suspected SAHS patients from 8 hospitals. They were assigned to home and hospital protocols at random. We determined the agreement between respiratory polygraphy AHI and PSG AHI scorings using Bland and Altman plots and diagnostic agreement using receiver operating characteristic (ROC) curves. The agreement in therapeutic decisions (continuous positive airway pressure treatment or not) between HRP and PSG scorings was done with likelihood ratios and post-test probability calculations. Results: Of 366 randomized patients, 342 completed the protocol. AHI from HRP scorings (with and without surrogate arousal) had similar agreement with PSG. AHI from SimultRP with surrogate arousal scoring had better agreement with PSG than AHI from SimultRP without surrogate arousal. HRP with surrogate arousal scoring had slightly worse ROC curves than HRP without surrogate arousal, and the opposite was true for SimultRP scorings. HRP with surrogate arousal showed slightly better agreement with PSG in therapeutic decisions than for HRP without surrogate arousal. Conclusion: Incorporating a surrogate arousal measure into HRP did not substantially increase its agreement with PSG when compared with the usual procedure (HRP without surrogate arousal). Citation: Masa JF; Corral J; Gomez de Terreros J; Duran-Cantolla J; Cabello M; Hern

  2. Assessment of susceptibility to pollution in littoral waters using the concept of recovery time.

    Science.gov (United States)

    Gómez, Aina G; Juanes, José A; Ondiviela, Bárbara; Revilla, José A

    2014-04-15

    Susceptibility to pollution can be related to the flushing capacity of aquatic systems. Transport time scales constitute a useful tool for representing the water exchange and transport processes. A new transport time scale, recovery time, and a methodology to estimate it by means of numerical models is hereby developed. Recovery time, calculated in Gijon, Santander and Tarragona harbours, is significantly related to physical, chemical and biological water quality indicators. Susceptibility, assessed through recovery time values, provides spatial patterns of expected flushing capacity, being sensitive to physical and hydrodynamic characteristics. The developed method is appropriate to estimate recovery time and assess susceptibility against pollution in littoral waters having great potential to be applied to different disciplines. Recovery time could be used in littoral waters as a surrogate of water quality indicators, to establish efficient monitoring programs, to define and characterize modified water bodies or to improve the design of marine infrastructures.

  3. Using multiscale spatial models to assess potential surrogate habitat for an imperiled reptile.

    Directory of Open Access Journals (Sweden)

    Jennifer M Fill

    Full Text Available In evaluating conservation and management options for species, practitioners might consider surrogate habitats at multiple scales when estimating available habitat or modeling species' potential distributions based on suitable habitats, especially when native environments are rare. Species' dependence on surrogates likely increases as optimal habitat is degraded and lost due to anthropogenic landscape change, and thus surrogate habitats may be vital for an imperiled species' survival in highly modified landscapes. We used spatial habitat models to examine a potential surrogate habitat for an imperiled ambush predator (eastern diamondback rattlesnake, Crotalus adamanteus; EDB at two scales. The EDB is an apex predator indigenous to imperiled longleaf pine ecosystems (Pinus palustris of the southeastern United States. Loss of native open-canopy pine savannas and woodlands has been suggested as the principal cause of the species' extensive decline. We examined EDB habitat selection in the Coastal Plain tidewater region to evaluate the role of marsh as a potential surrogate habitat and to further quantify the species' habitat requirements at two scales: home range (HR and within the home range (WHR. We studied EDBs using radiotelemetry and employed an information-theoretic approach and logistic regression to model habitat selection as use vs.We failed to detect a positive association with marsh as a surrogate habitat at the HR scale; rather, EDBs exhibited significantly negative associations with all landscape patches except pine savanna. Within home range selection was characterized by a negative association with forest and a positive association with ground cover, which suggests that EDBs may use surrogate habitats of similar structure, including marsh, within their home ranges. While our HR analysis did not support tidal marsh as a surrogate habitat, marsh may still provide resources for EDBs at smaller scales.

  4. Surrogate end points in women's health research: science, protoscience, and pseudoscience.

    Science.gov (United States)

    Grimes, David A; Schulz, Kenneth F; Raymond, Elizabeth G

    2010-04-01

    A surrogate end point (e.g., a laboratory test or image) serves as a proxy for a clinical end point of importance (e.g., fracture, thrombosis, or death). Adoption and use of surrogate end points lacking validation, especially in cardiovascular medicine, have caused thousands of patients' deaths, a serious violation of the ethical principle of beneficence. Copyright 2010 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  5. Quantifying the improvement of surrogate indices of hepatic insulin resistance using complex measurement techniques.

    Directory of Open Access Journals (Sweden)

    John G Hattersley

    Full Text Available We evaluated the ability of simple and complex surrogate-indices to identify individuals from an overweight/obese cohort with hepatic insulin-resistance (HEP-IR. Five indices, one previously defined and four newly generated through step-wise linear regression, were created against a single-cohort sample of 77 extensively characterised participants with the metabolic syndrome (age 55.6 ± 1.0 years, BMI 31.5 ± 0.4 kg/m(2; 30 males. HEP-IR was defined by measuring endogenous-glucose-production (EGP with [6-6(2H(2] glucose during fasting and euglycemic-hyperinsulinemic clamps and expressed as EGP*fasting plasma insulin. Complex measures were incorporated into the model, including various non-standard biomarkers and the measurement of body-fat distribution and liver-fat, to further improve the predictive capability of the index. Validation was performed against a data set of the same subjects after an isoenergetic dietary intervention (4 arms, diets varying in protein and fiber content versus control. All five indices produced comparable prediction of HEP-IR, explaining 39-56% of the variance, depending on regression variable combination. The validation of the regression equations showed little variation between the different proposed indices (r(2 = 27-32% on a matched dataset. New complex indices encompassing advanced measurement techniques offered an improved correlation (r = 0.75, P<0.001. However, when validated against the alternative dataset all indices performed comparably with the standard homeostasis model assessment for insulin resistance (HOMA-IR (r = 0.54, P<0.001. Thus, simple estimates of HEP-IR performed comparable to more complex indices and could be an efficient and cost effective approach in large epidemiological investigations.

  6. Desorption of a methamphetamine surrogate from wallboard under remediation conditions

    Science.gov (United States)

    Poppendieck, Dustin; Morrison, Glenn; Corsi, Richard

    2015-04-01

    Thousands of homes in the United States are found to be contaminated with methamphetamine each year. Buildings used to produce illicit methamphetamine are typically remediated by removing soft furnishings and stained materials, cleaning and sometimes encapsulating surfaces using paint. Methamphetamine that has penetrated into paint films, wood and other permanent materials can be slowly released back into the building air over time, exposing future occupants and re-contaminating furnishings. The objective of this study was to determine the efficacy of two wallboard remediation techniques for homes contaminated with methamphetamine: 1) enhancing desorption by elevating temperature and relative humidity while ventilating the interior space, and 2) painting over affected wallboard to seal the methamphetamine in place. The emission of a methamphetamine surrogate, N-isopropylbenzylamine (NIBA), from pre-dosed wallboard chambers over 20 days at 32 °C and two values of relative humidity were studied. Emission rates from wallboard after 15 days at 32 °C ranged from 35 to 1400 μg h-1 m-2. Less than 22% of the NIBA was removed from the chambers over three weeks. Results indicate that elevating temperatures during remediation and latex painting of impacted wallboard will not significantly reduce freebase methamphetamine emissions from wallboard. Raising the relative humidity from 27% to 49% increased the emission rates by a factor of 1.4. A steady-state model of a typical home using the emission rates from this study and typical residential building parameters and conditions shows that adult inhalation reference doses for methamphetamine will be reached when approximately 1 g of methamphetamine is present in the wallboard of a house.

  7. Survival of norovirus surrogate on various food-contact surfaces.

    Science.gov (United States)

    Kim, An-Na; Park, Shin Young; Bae, San-Cheong; Oh, Mi-Hwa; Ha, Sang-Do

    2014-09-01

    Norovirus (NoV) is an environmental threat to humans, which spreads easily from one infected person to another, causing foodborne and waterborne diseases. Therefore, precautions against NoV infection are important in the preparation of food. The aim of this study was to investigate the survival of murine norovirus (MNV), as a NoV surrogate, on six different food-contact surfaces: ceramic, wood, rubber, glass, stainless steel, and plastic. We inoculated 10(5) PFU of MNV onto the six different surface coupons that were then kept at room temperature for 28 days. On the food-contact surfaces, the greatest reduction in MNV was 2.28 log10 PFU/coupon, observed on stainless steel, while the lowest MNV reduction was 1.29 log10 PFU/coupon, observed on wood. The rank order of MNV reduction, from highest to lowest, was stainless steel, plastic, rubber, glass, ceramic, and wood. The values of d R (time required to reduce the virus by 90%) on survival plots of MNV determined by a modified Weibull model were 277.60 h (R(2) = 0.99) on ceramic, 492.59 h (R(2) = 0.98) on wood, 173.56 h on rubber (R(2) = 0.98), 97.18 h (R(2) = 0.94) on glass, 91.76 h (R(2) = 0.97) on stainless steel, and 137.74 h (R(2) = 0.97) on plastic. The infectivity of MNV on all food-contact surfaces remained after 28 days. These results show that MNV persists in an infective state on various food-contact surfaces for long periods. This study may provide valuable information for the control of NoV on various food-contact surfaces, in order to prevent foodborne disease.

  8. Interactions between Human Norovirus Surrogates and Acanthamoeba spp.

    Science.gov (United States)

    Hsueh, Tun-Yun; Gibson, Kristen E

    2015-06-15

    Human noroviruses (HuNoVs) are the most common cause of food-borne disease outbreaks, as well as virus-related waterborne disease outbreaks in the United States. Here, we hypothesize that common free-living amoebae (FLA)-ubiquitous in the environment, known to interact with pathogens, and frequently isolated from water and fresh produce-could potentially act as reservoirs of HuNoV and facilitate the environmental transmission of HuNoVs. To investigate FLA as reservoirs for HuNoV, the interactions between two Acanthamoeba species, A. castellanii and A. polyphaga, as well as two HuNoV surrogates, murine norovirus type 1 (MNV-1) and feline calicivirus (FCV), were evaluated. The results showed that after 1 h of amoeba-virus incubation at 25°C, 490 and 337 PFU of MNV-1/ml were recovered from A. castellanii and A. polyphaga, respectively, while only few or no FCVs were detected. In addition, prolonged interaction of MNV-1 with amoebae was investigated for a period of 8 days, and MNV-1 was demonstrated to remain stable at around 200 PFU/ml from day 2 to day 8 after virus inoculation in A. castellanii. Moreover, after a complete amoeba life cycle (i.e., encystment and excystment), infectious viruses could still be detected. To determine the location of virus associated with amoebae, immunofluorescence experiments were performed and showed MNV-1 transitioning from the amoeba surface to inside the amoeba over a 24-h period. These results are significant to the understanding of how HuNoVs may interact with other microorganisms in the environment in order to aid in its persistence and survival, as well as potential transmission in water and to vulnerable food products such as fresh produce.

  9. Adaptive surrogate model based multi-objective transfer trajectory optimization between different libration points

    Science.gov (United States)

    Peng, Haijun; Wang, Wei

    2016-10-01

    An adaptive surrogate model-based multi-objective optimization strategy that combines the benefits of invariant manifolds and low-thrust control toward developing a low-computational-cost transfer trajectory between libration orbits around the L1 and L2 libration points in the Sun-Earth system has been proposed in this paper. A new structure for a multi-objective transfer trajectory optimization model that divides the transfer trajectory into several segments and gives the dominations for invariant manifolds and low-thrust control in different segments has been established. To reduce the computational cost of multi-objective transfer trajectory optimization, a mixed sampling strategy-based adaptive surrogate model has been proposed. Numerical simulations show that the results obtained from the adaptive surrogate-based multi-objective optimization are in agreement with the results obtained using direct multi-objective optimization methods, and the computational workload of the adaptive surrogate-based multi-objective optimization is only approximately 10% of that of direct multi-objective optimization. Furthermore, the generating efficiency of the Pareto points of the adaptive surrogate-based multi-objective optimization is approximately 8 times that of the direct multi-objective optimization. Therefore, the proposed adaptive surrogate-based multi-objective optimization provides obvious advantages over direct multi-objective optimization methods.

  10. Band-phase-randomized Surrogates to assess nonlinearity in non-stationary time series

    CERN Document Server

    Guarin, Diego; Orozco, Alvaro

    2011-01-01

    Testing for nonlinearity is one of the most important preprocessing steps in nonlinear time series analysis. Typically, this is done by means of the linear surrogate data methods. But it is a known fact that the validity of the results heavily depends on the stationarity of the time series. Since most physiological signals are non-stationary, it is easy to falsely detect nonlinearity using the linear surrogate data methods. In this document, we propose a methodology to extend the procedure for generating constrained surrogate time series in order to assess nonlinearity in non-stationary data. The method is based on the band-phase-randomized surrogates, which consists (contrary to the linear surrogate data methods) in randomizing only a portion of the Fourier phases in the high frequency band. Analysis of simulated time series showed that in comparison to the linear surrogate data method, our method is able to discriminate between linear stationarity, linear non-stationary and nonlinear time series. When apply...

  11. EPA Recovery Mapper

    Data.gov (United States)

    U.S. Environmental Protection Agency — The EPA Recovery Mapper is an Internet interactive mapping application that allows users to discover information about every American Recovery and Reinvestment Act...

  12. Evaluating the Efficacy of Three U.S. Department of Agriculture-Approved Antimicrobial Sprays for Reducing Shiga Toxin-Producing Escherichia coli Surrogate Populations on Bob Veal Carcasses.

    Science.gov (United States)

    2016-06-01

    Effective antimicrobial intervention strategies to reduce Shiga toxin-producing Escherichia coli (STEC) risks associated with veal are needed. This study evaluated the efficacy of lactic acid (4.5%, pH 2.0), Citrilow (pH 1.2), and Beefxide (2.25%, pH 2.3) for reducing STEC surrogates on prerigor and chilled bob veal carcasses and monitored the effects of these interventions on chilled carcass color. Dehided bob veal carcasses were inoculated with a five-strain cocktail of rifampin-resistant, surrogate E. coli bacteria.E. coli surrogates were enumerated after inoculation, after water wash, after prechill carcass antimicrobial spray application, after chilling for 24 h, and after postchill carcass antimicrobial spray application; carcass color was measured throughout the process. A standard carcass water wash (∼50°C) reduced the STEC surrogate population by 0.9 log CFU/cm(2) (P ≤ 0.05). All three antimicrobial sprays applied to prerigor carcasses delivered an additional ∼0.5-log reduction (P ≤ 0.05) of the surrogates. Chilling of carcasses for 24 h reduced (P ≤ 0.05) the surrogate population by an additional ∼0.4 log cycles. The postchill application of the antimicrobial sprays provided no further reductions. Carcass L*, a*, and b* color values were not different (P > 0.05) among carcass treatments. Generally, the types and concentrations of the antimicrobial sprays evaluated herein did not negatively impact visual or instrumental color of chilled veal carcasses. This study demonstrates that warm water washing, followed by a prechill spray treatment with a low-pH chemical intervention, can effectively reduce STEC risks associated with veal carcasses; this provides processors a validated control point in slaughter operations.

  13. Youth in Recovery

    Science.gov (United States)

    de Miranda, John; Williams, Greg

    2011-01-01

    Young people are entering long-term recovery probably in greater numbers than ever before. A key word here is "probably" because we know precious little about the phenomenon of young people who recover from alcohol and drug addition. This article is a preliminary exploration of youth in recovery. It reviews several types of recovery support…

  14. Recovery from mental illness

    DEFF Research Database (Denmark)

    Petersen, Kirsten Schultz; Friis, Vivi Soegaard; Haxholm, Birthe Lodahl;

    2015-01-01

    Mental health services strive to implement a recovery-oriented approach to rehabilitation. Little is known about service users' perception of the recovery approach. The aim is to explore the service user's perspectives on facilitators and barriers associated with recovery. Twelve residents living...

  15. Coastal aquifer management under parameter uncertainty: Ensemble surrogate modeling based simulation-optimization

    Science.gov (United States)

    Janardhanan, S.; Datta, B.

    2011-12-01

    Surrogate models are widely used to develop computationally efficient simulation-optimization models to solve complex groundwater management problems. Artificial intelligence based models are most often used for this purpose where they are trained using predictor-predictand data obtained from a numerical simulation model. Most often this is implemented with the assumption that the parameters and boundary conditions used in the numerical simulation model are perfectly known. However, in most practical situations these values are uncertain. Under these circumstances the application of such approximation surrogates becomes limited. In our study we develop a surrogate model based coupled simulation optimization methodology for determining optimal pumping strategies for coastal aquifers considering parameter uncertainty. An ensemble surrogate modeling approach is used along with multiple realization optimization. The methodology is used to solve a multi-objective coastal aquifer management problem considering two conflicting objectives. Hydraulic conductivity and the aquifer recharge are considered as uncertain values. Three dimensional coupled flow and transport simulation model FEMWATER is used to simulate the aquifer responses for a number of scenarios corresponding to Latin hypercube samples of pumping and uncertain parameters to generate input-output patterns for training the surrogate models. Non-parametric bootstrap sampling of this original data set is used to generate multiple data sets which belong to different regions in the multi-dimensional decision and parameter space. These data sets are used to train and test multiple surrogate models based on genetic programming. The ensemble of surrogate models is then linked to a multi-objective genetic algorithm to solve the pumping optimization problem. Two conflicting objectives, viz, maximizing total pumping from beneficial wells and minimizing the total pumping from barrier wells for hydraulic control of

  16. Biomedically assisted reproduction and child birth: Surrogate motherhood in comparative European law and Serbia

    Directory of Open Access Journals (Sweden)

    Kovaček-Stanić Gordana

    2013-01-01

    Full Text Available Surrogate motherhood is an arrangement in which a woman agrees to carry and deliver a child for another couple who ordered the pregnancy. This procedure is applied today in Great Britain, Holland (although without legal regulations, Israel, Greece, Ukraine, Armenia, Georgia, the USA and Australia, and it is forbidden in France, Austria, Spain, Germany, Switzerland and Slovenia. There are two types of surrogacy, one when the woman gives birth to a child who is genetically her own ("partial", genetic surrogacy, and the other where the surrogate mother only carries and gives birth to a child, whereby the child is genetically from the couple that wanted the child, or the fertilized egg is from a third woman (donor, or the embryo was donated ("full", "total", gestational surrogacy. In these cases two women take part in conception and birth of the child while in the last case there is a third woman who will raise the child. Biologically observed, the woman whose egg has been fertilized may be called the genetic mother, while the woman who carried the pregnancy and gave birth to the child - the gestational carrier. Taking into consideration that the Preliminary Draft of the Serbian Civil Law anticipates the introduction of surrogate motherhood into domestic law, we believe restrictive solutions should first be taken into consideration. This would mean that only full surrogating should be allowed, namely the egg should be from the woman who wants the child and not the surrogate mother. In domestic conditions, genetic surrogation should not be allowed as it leads to confusion in family relations, and kinships still have an important social and legal significance in our country. The surrogate mother should be a woman who has already given birth, because in that way any possible shocks which might arise after birth when the woman who has to handover the child to the intended couple would be avoided. The next condition would be that persons involved in this

  17. Battleground Energy Recovery Project

    Energy Technology Data Exchange (ETDEWEB)

    Bullock, Daniel [USDOE Gulf Coast Clean Energy Application Center, Woodlands, TX (United States)

    2011-12-31

    In October 2009, the project partners began a 36-month effort to develop an innovative, commercial-scale demonstration project incorporating state-of-the-art waste heat recovery technology at Clean Harbors, Inc., a large hazardous waste incinerator site located in Deer Park, Texas. With financial support provided by the U.S. Department of Energy, the Battleground Energy Recovery Project was launched to advance waste heat recovery solutions into the hazardous waste incineration market, an area that has seen little adoption of heat recovery in the United States. The goal of the project was to accelerate the use of energy-efficient, waste heat recovery technology as an alternative means to produce steam for industrial processes. The project had three main engineering and business objectives: Prove Feasibility of Waste Heat Recovery Technology at a Hazardous Waste Incinerator Complex; Provide Low-cost Steam to a Major Polypropylene Plant Using Waste Heat; and Create a Showcase Waste Heat Recovery Demonstration Project.

  18. Myotonometry as a Surrogate Measure of Muscle Strength

    Science.gov (United States)

    Ang, B. S.; Feeback, D. L.; Leonard, C. T.; Sykes, J.; Kruger, E.; Clarke, M. S. F.

    2007-01-01

    be significantly (p less than 0.01) correlated with contemporaneous myotonometer measurements made on the rectis femoris muscle in a total of 16 healthy subjects (8 males, 8 females). Further-more, this device has been operationally tested during parabolic flight demonstrating its suitability for use in a microgravity environment. Our data indicates that the Myotonometer is a viable surrogate measure of muscle contractile state/tone and of muscle strength/force production. Additional studies are required to assess the suitability of this technique for assessing these measures in de-conditioned subjects such as crew-members.

  19. Laboratory Experiments on the Electrochemical Remediation of the Environment. Part 9: Microscale Recovery of a Soil Metal Pollutant and Its Extractant

    Science.gov (United States)

    Ibanez, Jorge G.; Balderas-Hernandez, Patricia; Garcia-Pintor, Elizabeth; Barba-Gonzalez, Sandy Nohemi; Doria-Serrano, Ma. del Carmen; Hernaiz-Arce, Lorena; Diaz-Perez, Armando; Lozano-Cusi, Ana

    2011-01-01

    Many soils throughout the world are contaminated with metal salts of diverse toxicity. We have developed an experiment to demonstrate the removal of a metal from an insoluble surrogate soil pollutant, CuCO[subscript 3] multiplied by Cu(OH)[subscript 2], by complexation followed by the simultaneous electrochemical recovery of the ligand (i.e.,…

  20. Laboratory Experiments on the Electrochemical Remediation of the Environment. Part 9: Microscale Recovery of a Soil Metal Pollutant and Its Extractant

    Science.gov (United States)

    Ibanez, Jorge G.; Balderas-Hernandez, Patricia; Garcia-Pintor, Elizabeth; Barba-Gonzalez, Sandy Nohemi; Doria-Serrano, Ma. del Carmen; Hernaiz-Arce, Lorena; Diaz-Perez, Armando; Lozano-Cusi, Ana

    2011-01-01

    Many soils throughout the world are contaminated with metal salts of diverse toxicity. We have developed an experiment to demonstrate the removal of a metal from an insoluble surrogate soil pollutant, CuCO[subscript 3] multiplied by Cu(OH)[subscript 2], by complexation followed by the simultaneous electrochemical recovery of the ligand (i.e.,…

  1. A Development of a Human Cranial Bone Surrogate for Impact Studies

    Directory of Open Access Journals (Sweden)

    Jack C Roberts

    2013-10-01

    Full Text Available In order to replicate the fracture behavior of the intact human skull under impact it becomes necessary to develop a material having the mechanical properties of cranial bone. The most important properties to replicate in a surrogate human skull were found to be the fracture toughness and tensile strength of the cranial tables as well as the bending strength of the 3-layer (inner table-diplöe-outer table architecture of the human skull. The materials selected to represent the surrogate cranial tables consisted of two different epoxy resins systems with random milled glass fiber to enhance the strength and stiffness and the materials to represent the surrogate diplöe consisted of three low density foams. Forty-one three-point bending fracture toughness tests were performed on nine material combinations. The materials that best represented the fracture toughness of cranial tables were then selected and formed into tensile samples and tested. These materials were then used with the two surrogate diplöe foam materials to create the three layer surrogate cranial bone samples for three point bending tests. Drop tower tests were performed on flat samples created from these materials and the fracture patterns were very similar to the linear fractures seen in pendulum impacts of intact human skulls. The surrogate cranial tables had the quasi-static fracture toughness and tensile strength of 2.5 MPa√m and 53 ± 4.9 MPa, respectively, while the same properties of human compact bone were 3.1 ± 1.8 MPa√m and 68 ± 18 MPa, respectively. The cranial surrogate had a quasi-static bending strength of 68 ± 5.7 MPa, while that of cranial bone was 82 ± 26 MPa. This material/design is currently being used to construct spherical shell samples for drop tower and ballistic tests.

  2. Primary Reference Fuels (PRFs) as Surrogates for Low Sensitivity Gasoline Fuels

    KAUST Repository

    Bhavani Shankar, Vijai Shankar

    2016-04-05

    Primary Reference Fuels (PRFs) - binary mixtures of n-heptane and iso-octane based on Research Octane Number (RON) - are popular gasoline surrogates for modeling combustion in spark ignition engines. The use of these two component surrogates to represent real gasoline fuels for simulations of HCCI/PCCI engines needs further consideration, as the mode of combustion is very different in these engines (i.e. the combustion process is mainly controlled by the reactivity of the fuel). This study presents an experimental evaluation of PRF surrogates for four real gasoline fuels termed FACE (Fuels for Advanced Combustion Engines) A, C, I, and J in a motored CFR (Cooperative Fuels Research) engine. This approach enables the surrogate mixtures to be evaluated purely from a chemical kinetic perspective. The gasoline fuels considered in this study have very low sensitivities, S (RON-MON), and also exhibit two-stage ignition behavior. The first stage heat release, which is termed Low Temperature Heat Release (LTHR), controls the combustion phasing in this operating mode. As a result, the performance of the PRF surrogates was evaluated by its ability to mimic the low temperature chemical reactivity of the real gasoline fuels. This was achieved by comparing the LTHR from the engine pressure histories. The PRF surrogates were able to consistently reproduce the amount of LTHR, closely match the phasing of LTHR, and the compression ratio for the start of hot ignition of the real gasoline fuels. This suggests that the octane quality of a surrogate fuel is a good indicator of the fuel’s reactivity across low (LTC), negative temperature coefficient (NTC), and high temperature chemical (HTC) reactivity regimes.

  3. Ovulation Statuses of Surrogate Gilts Are Associated with the Efficiency of Excellent Pig Cloning.

    Directory of Open Access Journals (Sweden)

    Yanjun Huan

    Full Text Available Somatic cell nuclear transfer (SCNT is an assisted reproductive technique that can produce multiple copies of excellent livestock. However, low cloning efficiency limits the application of SCNT. In this study, we systematically investigated the major influencing factors related to the overall cloning efficiency in pigs. Here, 13620 cloned embryos derived from excellent pigs were transferred into 79 surrogate gilts, and 119 live cloned piglets were eventually generated. During cloning, group of cloned embryos derived from excellent Landrace or Large white pigs presented no significant differences of cleavage and blastocyst rates, blastocyst cell numbers, surrogate pregnancy and delivery rates, average numbers of piglets born and alive and cloning efficiencies, and group of 101-150, 151-200 or 201-250 cloned embryos transferred per surrogate also displayed a similar developmental efficiency. When estrus stage of surrogate gilts was compared, group of embryo transfer on Day 2 of estrus showed significantly higher pregnancy rate, delivery rate, average number of piglets born, average alive piglet number or cloning efficiency than group on Day 1, Day 3, Day 4 or Day 5, respectively (P<0.05. And, in comparison with the preovulation and postovulation groups, group of surrogate gilts during periovulation displayed a significantly higher overall cloning efficiency (P<0.05. Further investigation of surrogate estrus stage and ovulation status displayed that ovulation status was the real factor underlying estrus stage to determine the overall cloning efficiency. And more, follicle puncture for preovulation, not transfer position shallowed for preovulation or deepened for postovulation, significantly improved the average number of piglets alive and cloning efficiency (P<0.05. In conclusion, our results demonstrated that ovulation status of surrogate gilts was the fundamental factor determining the overall cloning efficiency of excellent pigs, and follicle

  4. Real-time characterization of partially observed epidemics using surrogate models.

    Energy Technology Data Exchange (ETDEWEB)

    Safta, Cosmin; Ray, Jaideep; Lefantzi, Sophia; Crary, David (Applied Research Associates, Arlington, VA); Sargsyan, Khachik; Cheng, Karen (Applied Research Associates, Arlington, VA)

    2011-09-01

    We present a statistical method, predicated on the use of surrogate models, for the 'real-time' characterization of partially observed epidemics. Observations consist of counts of symptomatic patients, diagnosed with the disease, that may be available in the early epoch of an ongoing outbreak. Characterization, in this context, refers to estimation of epidemiological parameters that can be used to provide short-term forecasts of the ongoing epidemic, as well as to provide gross information on the dynamics of the etiologic agent in the affected population e.g., the time-dependent infection rate. The characterization problem is formulated as a Bayesian inverse problem, and epidemiological parameters are estimated as distributions using a Markov chain Monte Carlo (MCMC) method, thus quantifying the uncertainty in the estimates. In some cases, the inverse problem can be computationally expensive, primarily due to the epidemic simulator used inside the inversion algorithm. We present a method, based on replacing the epidemiological model with computationally inexpensive surrogates, that can reduce the computational time to minutes, without a significant loss of accuracy. The surrogates are created by projecting the output of an epidemiological model on a set of polynomial chaos bases; thereafter, computations involving the surrogate model reduce to evaluations of a polynomial. We find that the epidemic characterizations obtained with the surrogate models is very close to that obtained with the original model. We also find that the number of projections required to construct a surrogate model is O(10)-O(10{sup 2}) less than the number of samples required by the MCMC to construct a stationary posterior distribution; thus, depending upon the epidemiological models in question, it may be possible to omit the offline creation and caching of surrogate models, prior to their use in an inverse problem. The technique is demonstrated on synthetic data as well as

  5. Definitions and validation criteria for biomarkers and surrogate endpoints: development and testing of a quantitative hierarchical levels of evidence schema

    DEFF Research Database (Denmark)

    Lassere, Marissa N; Johnson, Kent R; Boers, Maarten

    2007-01-01

    to develop a hierarchical schema that systematically evaluates and ranks the surrogacy status of biomarkers and surrogates; and to obtain feedback from stakeholders. METHODS: After a systematic search of Medline and Embase on biomarkers, surrogate (outcomes, endpoints, markers, indicators), intermediate...... endpoints, and leading indicators, a quantitative surrogate validation schema was developed and subsequently evaluated at a stakeholder workshop. RESULTS: The search identified several classification schema and definitions. Components of these were incorporated into a new quantitative surrogate validation...... of the National Institutes of Health definitions of biomarker, surrogate endpoint, and clinical endpoint was useful. CONCLUSION: Further development and application of this schema provides incentives and guidance for effective biomarker and surrogate endpoint research, and more efficient drug discovery...

  6. Efficacy of three ethanol-based hand rubs against feline calicivirus, a surrogate virus for norovirus.

    Science.gov (United States)

    Kampf, G; Grotheer, D; Steinmann, J

    2005-06-01

    We investigated the efficacy of three ethanol-based hand rubs (Sterillium Virugard, 95% ethanol; Sterillium Rub, 80% ethanol; Desderman N, 75.1% ethanol) against feline calicivirus (FCV), the surrogate virus for norovirus, on artificially contaminated hands of healthy volunteers. The ASTM E 1838-02 standard was used. Experiments were controlled with 70% ethanol and 70% propan-1-ol which were previously found to have maximal efficacy against FCV. In the first step, three different organic loads (5% fetal bovine serum, 5% faecal suspension and the tripartite ASTM load) were compared. A significant influence of the type of organic load was found (P<0.001, ANOVA). In the second step, the hand rubs were investigated with a 5% faecal suspension as a challenging organic load. The hand rub based on 95% ethanol was more effective than those based on 70% ethanol (mean log10 reduction factor: 2.17 vs. 1.56; P=0.17) and 70% propan-1-ol (mean RF: 1.63 vs. 0.95; P=0.0003). The hand rub based on 80% ethanol was also more effective than those based on 70% ethanol (mean RF: 1.25 vs. 1.03: P=0.20) and 70% propan-1-ol (mean RF: 1.43 vs. 1.09; P=0.03). The hand rub based on 75.1% ethanol was less effective than those based on 70% ethanol (mean RF: 1.07 vs. 1.27; P=0.47) and 70% propan-1-ol (mean RF: 0.78 vs. 0.97; P=0.35). Based on our data, ethanol has superior efficacy against FCV than propan-1-ol. In addition, a higher ethanol concentration in three commercially available hand rubs was associated with better efficacy against FCV.

  7. Quantifying the improvement of surrogate indices of hepatic insulin resistance using complex measurement techniques.

    Science.gov (United States)

    Hattersley, John G; Möhlig, Matthias; Roden, Michael; Arafat, Ayman M; Loeffelholz, Christian V; Nowotny, Peter; Machann, Jürgen; Hierholzer, Johannes; Osterhoff, Martin; Khan, Michael; Pfeiffer, Andreas F H; Weickert, Martin O

    2012-01-01

    We evaluated the ability of simple and complex surrogate-indices to identify individuals from an overweight/obese cohort with hepatic insulin-resistance (HEP-IR). Five indices, one previously defined and four newly generated through step-wise linear regression, were created against a single-cohort sample of 77 extensively characterised participants with the metabolic syndrome (age 55.6 ± 1.0 years, BMI 31.5 ± 0.4 kg/m(2); 30 males). HEP-IR was defined by measuring endogenous-glucose-production (EGP) with [6-6(2)H(2)] glucose during fasting and euglycemic-hyperinsulinemic clamps and expressed as EGP*fasting plasma insulin. Complex measures were incorporated into the model, including various non-standard biomarkers and the measurement of body-fat distribution and liver-fat, to further improve the predictive capability of the index. Validation was performed against a data set of the same subjects after an isoenergetic dietary intervention (4 arms, diets varying in protein and fiber content versus control). All five indices produced comparable prediction of HEP-IR, explaining 39-56% of the variance, depending on regression variable combination. The validation of the regression equations showed little variation between the different proposed indices (r(2) = 27-32%) on a matched dataset. New complex indices encompassing advanced measurement techniques offered an improved correlation (r = 0.75, Presistance (HOMA-IR) (r = 0.54, P<0.001). Thus, simple estimates of HEP-IR performed comparable to more complex indices and could be an efficient and cost effective approach in large epidemiological investigations.

  8. Biomarkers and Surrogate Endpoints in Uveitis: The Impact of Quantitative Imaging.

    Science.gov (United States)

    Denniston, Alastair K; Keane, Pearse A; Srivastava, Sunil K

    2017-05-01

    Uveitis is a major cause of sight loss across the world. The reliable assessment of intraocular inflammation in uveitis ('disease activity') is essential in order to score disease severity and response to treatment. In this review, we describe how 'quantitative imaging', the approach of using automated analysis and measurement algorithms across both standard and emerging imaging modalities, can develop objective instrument-based measures of disease activity. This is a narrative review based on searches of the current world literature using terms related to quantitative imaging techniques in uveitis, supplemented by clinical trial registry data, and expert knowledge of surrogate endpoints and outcome measures in ophthalmology. Current measures of disease activity are largely based on subjective clinical estimation, and are relatively insensitive, with poor discrimination and reliability. The development of quantitative imaging in uveitis is most established in the use of optical coherence tomographic (OCT) measurement of central macular thickness (CMT) to measure severity of macular edema (ME). The transformative effect of CMT in clinical assessment of patients with ME provides a paradigm for the development and impact of other forms of quantitative imaging. Quantitative imaging approaches are now being developed and validated for other key inflammatory parameters such as anterior chamber cells, vitreous haze, retinovascular leakage, and chorioretinal infiltrates. As new forms of quantitative imaging in uveitis are proposed, the uveitis community will need to evaluate these tools against the current subjective clinical estimates and reach a new consensus for how disease activity in uveitis should be measured. The development, validation, and adoption of sensitive and discriminatory measures of disease activity is an unmet need that has the potential to transform both drug development and routine clinical care for the patient with uveitis.

  9. Functions and responsibilities of organizations dealing with surrogate motherhood in the UK.

    Science.gov (United States)

    van Den Akker, Olga B. A.

    1998-01-01

    The separation of maternity from social motherhood and progress in reproductive technology raise many social, psychological, medical and legal issues (van den Akker, 1994). The most recent British Medical Association report (BMA, 1996) acknowledged the practice of surrogacy and issued new guidelines for good practice and support for those involved. Surrogate motherhood services have increased around the country over the last decade, even before the formal British Medical Association acknowledgement of their necessity and existence (BMA, 1996). The present survey investigated the incidence, accessibility, and functions of such organizations, specifically, the legal, medical and psychological problems encountered and how they were dealt with, to discover what advice and support is given. Ten centres were interviewed. The incidence of surrogacy conducted through these organizations is widespread, but the processes involved and therefore the implications of the types of surrogacy dealt with are very different. The two major surrogacy agencies deal primarily with partial surrogacy, whereas the clinics are concerned almost exclusively with full (IVF) surrogacy. Information about the procedures involved appears to rely on experience; screening is generally carried out 'in house', and psychological factors are dealt with by counsellors on request by the couples. In general, although the roles of the organizations are disparate and clearly defined, no holistic or long-term care is provided by any of the organizations involved with surrogacy in the UK. The reasons for this are clear cut and stem from the nature of the organizations, and the behaviour of the clients. The data indicate that the current procedures used by the organizations are adequate but could be improved and standardized.

  10. Development of a multi-objective optimization algorithm using surrogate models for coastal aquifer management

    Science.gov (United States)

    Kourakos, George; Mantoglou, Aristotelis

    2013-02-01

    SummaryThe demand for fresh water in coastal areas and islands can be very high due to increased local needs and tourism. A multi-objective optimization methodology is developed, involving minimization of economic and environmental costs while satisfying water demand. The methodology considers desalinization of pumped water and injection of treated water into the aquifer. Variable density aquifer models are computationally intractable when integrated in optimization algorithms. In order to alleviate this problem, a multi-objective optimization algorithm is developed combining surrogate models based on Modular Neural Networks [MOSA(MNNs)]. The surrogate models are trained adaptively during optimization based on a genetic algorithm. In the crossover step, each pair of parents generates a pool of offspring which are evaluated using the fast surrogate model. Then, the most promising offspring are evaluated using the exact numerical model. This procedure eliminates errors in Pareto solution due to imprecise predictions of the surrogate model. The method has important advancements compared to previous methods such as precise evaluation of the Pareto set and alleviation of propagation of errors due to surrogate model approximations. The method is applied to an aquifer in the Greek island of Santorini. The results show that the new MOSA(MNN) algorithm offers significant reduction in computational time compared to previous methods (in the case study it requires only 5% of the time required by other methods). Further, the Pareto solution is better than the solution obtained by alternative algorithms.

  11. Combining endangered plants and animals as surrogates to identify priority conservation areas in Yunnan, China

    Science.gov (United States)

    Yang, Feiling; Hu, Jinming; Wu, Ruidong

    2016-08-01

    Suitable surrogates are critical for identifying optimal priority conservation areas (PCAs) to protect regional biodiversity. This study explored the efficiency of using endangered plants and animals as surrogates for identifying PCAs at the county level in Yunnan, southwest China. We ran the Dobson algorithm under three surrogate scenarios at 75% and 100% conservation levels and identified four types of PCAs. Assessment of the protection efficiencies of the four types of PCAs showed that endangered plants had higher surrogacy values than endangered animals but that the two were not substitutable; coupled endangered plants and animals as surrogates yielded a higher surrogacy value than endangered plants or animals as surrogates; the plant-animal priority areas (PAPAs) was the optimal among the four types of PCAs for conserving both endangered plants and animals in Yunnan. PAPAs could well represent overall species diversity distribution patterns and overlap with critical biogeographical regions in Yunnan. Fourteen priority units in PAPAs should be urgently considered as optimizing Yunnan’s protected area system. The spatial pattern of PAPAs at the 100% conservation level could be conceptualized into three connected conservation belts, providing a valuable reference for optimizing the layout of the in situ protected area system in Yunnan.

  12. Combining endangered plants and animals as surrogates to identify priority conservation areas in Yunnan, China.

    Science.gov (United States)

    Yang, Feiling; Hu, Jinming; Wu, Ruidong

    2016-08-19

    Suitable surrogates are critical for identifying optimal priority conservation areas (PCAs) to protect regional biodiversity. This study explored the efficiency of using endangered plants and animals as surrogates for identifying PCAs at the county level in Yunnan, southwest China. We ran the Dobson algorithm under three surrogate scenarios at 75% and 100% conservation levels and identified four types of PCAs. Assessment of the protection efficiencies of the four types of PCAs showed that endangered plants had higher surrogacy values than endangered animals but that the two were not substitutable; coupled endangered plants and animals as surrogates yielded a higher surrogacy value than endangered plants or animals as surrogates; the plant-animal priority areas (PAPAs) was the optimal among the four types of PCAs for conserving both endangered plants and animals in Yunnan. PAPAs could well represent overall species diversity distribution patterns and overlap with critical biogeographical regions in Yunnan. Fourteen priority units in PAPAs should be urgently considered as optimizing Yunnan's protected area system. The spatial pattern of PAPAs at the 100% conservation level could be conceptualized into three connected conservation belts, providing a valuable reference for optimizing the layout of the in situ protected area system in Yunnan.

  13. Surrogate utility estimation by long-term partners and unfamiliar dyads

    Directory of Open Access Journals (Sweden)

    Richard J Tunney

    2015-03-01

    Full Text Available To what extent are people able to make predictions about other people’s preferences and values? We report two experiments that present a novel method assessing some of the basic processes in surrogate decision-making, namely surrogate-utility estimation. In each experiment participants formed dyads who were asked to assign utilities to health related items and commodity items, and to predict their partner’s utility judgments for the same items. In experiment one we showed that older adults in long-term relationships were able to accurately predict their partner’s wishes. In experiment two we showed that younger adults who were relatively unfamiliar with one another were also able to predict other people’s wishes. Crucially we demonstrated that these judgments were accurate even after partialling out each participant’s own preferences indicating that in order to make surrogate utility estimations people engage in perspective-taking rather than simple anchoring and adjustment, suggesting that utility estimation is not the cause of inaccuracy in surrogate decision-making. The data and implications are discussed with respect to theories of surrogate decision-making.

  14. Surrogate POD models for building forming limit diagrams of parameterized sheet metal forming applications

    Science.gov (United States)

    Hamdaoui, M.; Le Quilliec, Guénhaël; Breitkopf, Piotr; Villon, Pierre

    2013-05-01

    The aim of this work is to present a surrogate POD (Proper Orthogonal Decomposition) approach for building forming limit diagrams at minimum cost for parameterized sheet metal formed work-pieces. First, a Latin Hypercube Sampling is performed on the design parameter space. Then, at each design site, displacement fields are computed using the popular open-source finite element software Code_Aster. Then, the method of snapshots is used for POD mode determination. POD coefficients are interpolated using kriging. Furthermore, an error analysis of the surrogate POD model is performed on a validation set. It is shown that on the considered use case the accuracy of the surrogate POD model is excellent for the representation of finite element displacement fields. The validated surrogate POD model is then used to build forming limit diagrams (FLD) for any design parameter to assess the quality of stamped metal sheets. Using the surrogate POD model, the Green-Lagrange strain tensor is derived, then major and minor principal deformations are determined at Gauss points for each mesh element. Furthermore, a signed distance between the forming limit curve in rupture and the obtained cloud of points in the plane (ɛ2, ɛ1) is computed to assess the quality of the formed workpiece. The minimization of this signed distance allows determining the safest design for the chosen use case.

  15. Stochastic structural optimization using particle swarm optimization, surrogate models and Bayesian statistics

    Institute of Scientific and Technical Information of China (English)

    Jongbin Im; Jungsun Park

    2013-01-01

    This paper focuses on a method to solve structural optimization problems using particle swarm optimization (PSO),surrogate models and Bayesian statistics.PSO is a random/stochastic search algorithm designed to find the global optimum.However,PSO needs many evaluations compared to gradient-based optimization.This means PSO increases the analysis costs of structural optimization.One of the methods to reduce computing costs in stochastic optimization is to use approximation techniques.In this work,surrogate models are used,including the response surface method (RSM) and Kriging.When surrogate models are used,there are some errors between exact values and approximated values.These errors decrease the reliability of the optimum values and discard the realistic approximation of using surrogate models.In this paper,Bayesian statistics is used to obtain more reliable results.To verify and confirm the efficiency of the proposed method using surrogate models and Bayesian statistics for stochastic structural optimization,two numerical examples are optimized,and the optimization of a hub sleeve is demonstrated as a practical problem.

  16. Electrochemical reduction of CerMet fuels for transmutation using surrogate CeO2-Mo pellets

    Science.gov (United States)

    Claux, B.; Souček, P.; Malmbeck, R.; Rodrigues, A.; Glatz, J.-P.

    2017-08-01

    One of the concepts chosen for the transmutation of minor actinides in Accelerator Driven Systems or fast reactors proposes the use of fuels and targets containing minor actinides oxides embedded in an inert matrix either composed of molybdenum metal (CerMet fuel) or of ceramic magnesium oxide (CerCer fuel). Since the sufficient transmutation cannot be achieved in a single step, it requires multi-recycling of the fuel including recovery of the not transmuted minor actinides. In the present work, a pyrochemical process for treatment of Mo metal inert matrix based CerMet fuels is studied, particularly the electroreduction in molten chloride salt as a head-end step required prior the main separation process. At the initial stage, different inactive pellets simulating the fuel containing CeO2 as minor actinide surrogates were examined. The main studied parameters of the process efficiency were the porosity and composition of the pellets and the process parameters as current density and passed charge. The results indicated the feasibility of the process, gave insight into its limiting parameters and defined the parameters for the future experiment on minor actinide containing material.

  17. Time-varying surrogate data to assess nonlinearity in nonstationary time series: application to heart rate variability.

    Science.gov (United States)

    Faes, Luca; Zhao, He; Chon, Ki H; Nollo, Giandomenico

    2009-03-01

    We propose a method to extend to time-varying (TV) systems the procedure for generating typical surrogate time series, in order to test the presence of nonlinear dynamics in potentially nonstationary signals. The method is based on fitting a TV autoregressive (AR) model to the original series and then regressing the model coefficients with random replacements of the model residuals to generate TV AR surrogate series. The proposed surrogate series were used in combination with a TV sample entropy (SE) discriminating statistic to assess nonlinearity in both simulated and experimental time series, in comparison with traditional time-invariant (TIV) surrogates combined with the TIV SE discriminating statistic. Analysis of simulated time series showed that using TIV surrogates, linear nonstationary time series may be erroneously regarded as nonlinear and weak TV nonlinearities may remain unrevealed, while the use of TV AR surrogates markedly increases the probability of a correct interpretation. Application to short (500 beats) heart rate variability (HRV) time series recorded at rest (R), after head-up tilt (T), and during paced breathing (PB) showed: 1) modifications of the SE statistic that were well interpretable with the known cardiovascular physiology; 2) significant contribution of nonlinear dynamics to HRV in all conditions, with significant increase during PB at 0.2 Hz respiration rate; and 3) a disagreement between TV AR surrogates and TIV surrogates in about a quarter of the series, suggesting that nonstationarity may affect HRV recordings and bias the outcome of the traditional surrogate-based nonlinearity test.

  18. Recovery and money management.

    Science.gov (United States)

    Rowe, Michael; Serowik, Kristin L; Ablondi, Karen; Wilber, Charles; Rosen, Marc I

    2013-06-01

    Social recovery and external money management are important approaches in contemporary mental health care, but little research has been done on the relationship between the two or on application of recovery principles to money management for people at risk of being assigned a representative payee or conservator. Out of 49 total qualitative interviews, 25 transcripts with persons receiving Social Security insurance or Social Security disability insurance who were at risk of being assigned a money manager were analyzed to assess the presence of recognized recovery themes. The recovery principles of self-direction and responsibility were strong themes in participant comments related to money management. Money management interventions should incorporate peoples' recovery-related motivations to acquire financial management skills as a means to direct and assume responsibility for one's finances. Staff involved in money management should receive training to support client's recovery-related goals. (PsycINFO Database Record (c) 2013 APA, all rights reserved).

  19. International water and steam quality standards for thermal power station drum-type and waste heat recovery boilers with the treatment of boiler water with phosphates and NaOH

    Science.gov (United States)

    Petrova, T. I.; Orlov, K. A.; Dooley, R. B.

    2017-01-01

    One of the ways for improving the operational reliability and economy of thermal power station equipment, including combined-cycle equipment, is to decrease the rates of the corrosion of constructional materials and the formation of scales in the water-steam circuit. These processes can be reduced to a minimum via the use of water with a minimum content of admixtures and the correction treatment of a heat-transfer fluid. The International Association for the Properties of Water and Steam (IAPWS), which unites specialists from every country of the world, has developed water and steam quality standards for power station equipment of different types on the basis of theoretical studies and long-term experience in the operation of power plants in 21 countries. Different water chemistry regimes are currently used at conventional and combined-cycle thermal power stations. This paper describes the conditions for the implementation of water chemistry regimes with the use of sodium salts of phosphoric acid and NaOH for the quality correction of boiler water. Water and steam quality standards and some recommendations for their maintenance under different operational conditions are given for each of the considered water chemistry regimes. The standards are designed for the water-steam circuit of conventional and combined-cycle thermal power stations. It is pointed out that the quality control of a heat-transfer fluid must be especially careful at combined-cycle thermal power stations with frequent startups and shutdowns.

  20. Adaptive surrogate modeling by ANOVA and sparse polynomial dimensional decomposition for global sensitivity analysis in fluid simulation

    Energy Technology Data Exchange (ETDEWEB)

    Tang, Kunkun, E-mail: ktg@illinois.edu [The Center for Exascale Simulation of Plasma-Coupled Combustion (XPACC), University of Illinois at Urbana–Champaign, 1308 W Main St, Urbana, IL 61801 (United States); Inria Bordeaux – Sud-Ouest, Team Cardamom, 200 avenue de la Vieille Tour, 33405 Talence (France); Congedo, Pietro M. [Inria Bordeaux – Sud-Ouest, Team Cardamom, 200 avenue de la Vieille Tour, 33405 Talence (France); Abgrall, Rémi [Institut für Mathematik, Universität Zürich, Winterthurerstrasse 190, CH-8057 Zürich (Switzerland)

    2016-06-01

    The Polynomial Dimensional Decomposition (PDD) is employed in this work for the global sensitivity analysis and uncertainty quantification (UQ) of stochastic systems subject to a moderate to large number of input random variables. Due to the intimate connection between the PDD and the Analysis of Variance (ANOVA) approaches, PDD is able to provide a simpler and more direct evaluation of the Sobol' sensitivity indices, when compared to the Polynomial Chaos expansion (PC). Unfortunately, the number of PDD terms grows exponentially with respect to the size of the input random vector, which makes the computational cost of standard methods unaffordable for real engineering applications. In order to address the problem of the curse of dimensionality, this work proposes essentially variance-based adaptive strategies aiming to build a cheap meta-model (i.e. surrogate model) by employing the sparse PDD approach with its coefficients computed by regression. Three levels of adaptivity are carried out in this paper: 1) the truncated dimensionality for ANOVA component functions, 2) the active dimension technique especially for second- and higher-order parameter interactions, and 3) the stepwise regression approach designed to retain only the most influential polynomials in the PDD expansion. During this adaptive procedure featuring stepwise regressions, the surrogate model representation keeps containing few terms, so that the cost to resolve repeatedly the linear systems of the least-squares regression problem is negligible. The size of the finally obtained sparse PDD representation is much smaller than the one of the full expansion, since only significant terms are eventually retained. Consequently, a much smaller number of calls to the deterministic model is required to compute the final PDD coefficients.

  1. Surrogate molecular markers for IGHV mutational status in chronic lymphocytic leukemia for predicting time to first treatment.

    Science.gov (United States)

    Morabito, Fortunato; Cutrona, Giovanna; Mosca, Laura; D'Anca, Marianna; Matis, Serena; Gentile, Massimo; Vigna, Ernesto; Colombo, Monica; Recchia, Anna Grazia; Bossio, Sabrina; De Stefano, Laura; Maura, Francesco; Manzoni, Martina; Ilariucci, Fiorella; Consoli, Ugo; Vincelli, Iolanda; Musolino, Caterina; Cortelezzi, Agostino; Molica, Stefano; Ferrarini, Manlio; Neri, Antonino

    2015-08-01

    ZAP-70 is a marker of clinical outcome in chronic lymphocytic leukemia (CLL), however its assessment suffers from a lack of standardization consensus. To identify novel markers able to surrogate IGHV mutational status, CD19(+)CD5(+)-B-lymphocytes from 216 patients enrolled in a prospective study (ClinicalTrial.gov Identifier:NCT00917540), underwent gene expression profiling. Samples were split into CLL-Training (n=102) and CLL-Validation (n=114) sets, and an independent supervised analysis for IGHV mutational status was performed considering all genes with gene expression equal or above that of ZAP-70. Thirty-one genes (23 up- and 8 down-regulated) and 23 genes (18 up- and 5 down-regulated) satisfied these criteria in the CLL-Training and CLL-Validation sets, respectively, and 20 common genes (15 up and 5 down) were found to be differentially regulated in both sets. Two (SNORA70F, NRIP1) of the down-regulated and 6 (SEPT10, ZNF667, TGFBR3, MBOAT1, LPL, CRY1) of the up-regulated genes were significantly associated with a reduced risk of disease progression in both sets. Forcing the afore-mentioned genes in a Cox multivariate model together with IGHV mutational status, only CRY1 (HR=2.3, 95% CI: 1.1-4.9, P=.027) and MBOAT1 (HR=2.1, 95% CI: 1.1-3.7, P=.018) retained their independent prognostic impact, supporting the hypothesis that these genes may potentially act as surrogates for predicting IGHV mutational status.

  2. Adaptive surrogate modeling by ANOVA and sparse polynomial dimensional decomposition for global sensitivity analysis in fluid simulation

    Science.gov (United States)

    Tang, Kunkun; Congedo, Pietro M.; Abgrall, Rémi

    2016-06-01

    The Polynomial Dimensional Decomposition (PDD) is employed in this work for the global sensitivity analysis and uncertainty quantification (UQ) of stochastic systems subject to a moderate to large number of input random variables. Due to the intimate connection between the PDD and the Analysis of Variance (ANOVA) approaches, PDD is able to provide a simpler and more direct evaluation of the Sobol' sensitivity indices, when compared to the Polynomial Chaos expansion (PC). Unfortunately, the number of PDD terms grows exponentially with respect to the size of the input random vector, which makes the computational cost of standard methods unaffordable for real engineering applications. In order to address the problem of the curse of dimensionality, this work proposes essentially variance-based adaptive strategies aiming to build a cheap meta-model (i.e. surrogate model) by employing the sparse PDD approach with its coefficients computed by regression. Three levels of adaptivity are carried out in this paper: 1) the truncated dimensionality for ANOVA component functions, 2) the active dimension technique especially for second- and higher-order parameter interactions, and 3) the stepwise regression approach designed to retain only the most influential polynomials in the PDD expansion. During this adaptive procedure featuring stepwise regressions, the surrogate model representation keeps containing few terms, so that the cost to resolve repeatedly the linear systems of the least-squares regression problem is negligible. The size of the finally obtained sparse PDD representation is much smaller than the one of the full expansion, since only significant terms are eventually retained. Consequently, a much smaller number of calls to the deterministic model is required to compute the final PDD coefficients.

  3. System i Disaster Recovery Planning

    CERN Document Server

    Dolewski, Richard

    2008-01-01

    Mapping out all the preparations necessary for an effective disaster recovery plan and its safeguard-a continuous maintenance program-this guide is aimed at IT managers of small and medium businesses. The opening section covers the initial steps of auditing vulnerability, ranking essential IT functions, and reviewing the storage of tape backups, with the following discussion focused on the elements of the plan itself. The plan includes a mission statement, a definition of disaster, the assignment of staff to teams, methods of compensating for human error, and standards for documenting the step

  4. Acute toxicity of six freshwater mussel species (Glochidia) to six chemicals: Implications for daphnids and Utterbackia imbecillis as surrogates for protection of freshwater mussels (Unionidae)

    Science.gov (United States)

    Milam, C.D.; Farris, J.L.; Dwyer, F.J.; Hardesty, D.K.

    2005-01-01

    Acute (24-h) toxicity tests were used in this study to compare lethality responses in early life stages (glochidia) of six freshwater mussel species, Leptodea fragilis, U. imbecillis, Lampsilis cardium, Lampsilis siliquoidea, Megalonaias nervosa, and Ligumia subrostrata, and two standard test organisms, Ceriodaphnia dubia and Daphnia magna. Concentrations of carbaryl, copper, 4-nonylphenol, pentachlorophenol, permethrin, and 2,4-D were used in acute exposures to represent different chemical classes and modes of action. The relative sensitivities of species were evaluated by ranking their LC 50 values for each chemical. We used these ranks to determine the extent to which U. imbecillis (one of the most commonly used unionids in toxicity tests) was representative of the tolerances of other mussels. We also calculated geometric mean LC50s for the families Unionidae and Daphnidae. Rankings of these data were used to assess the extent to which Daphnidae can be used as surrogates for freshwater mussels relative to chemical sensitivity. While no single chemical elicited consistently high or low toxicity estimates, carbaryl and 2,4-D were generally the least toxic to all species tested. No species was always the most sensitive, and Daphnidae were generally protective of Unionidae. Utterbackia imbecillis, while often proposed as a standard unionid mussel test species, did not always qualify as a sufficient surrogate (i.e., a substitute organism that often elicits similar sensitivity responses to the same contaminant exposure) for other species of mussels, since it was usually one of the more tolerant species in our rankings. U. imbecillis should be used as a surrogate species only with this caution on its relative insensitivity. ?? 2005 Springer Science+Business Media, Inc.

  5. Neutron-induced cross sections of actinides via the surrogate-reaction method

    Directory of Open Access Journals (Sweden)

    Ducasse Q.

    2013-12-01

    Full Text Available The surrogate-reaction method is an indirect way of determining cross sections for reactions that proceed through a compound nucleus. This technique may enable neutron-induced cross sections to be extracted for short-lived nuclei that otherwise cannot be measured. However, the validity of the surrogate method has to be investigated. In particular, the absence of a compound nucleus formation and the Jπ dependence of the decay probabilities may question the method. In this work we study the reactions 238U(d,p239U, 238U(3He,t238Np, 238U(3He,4He237U as surrogates for neutron-induced reactions on 238U, 237Np and 236U, respectively, for which good quality data exist. The experimental set-up enabled the measurement of fission and gamma-decay probabilities. The first results are hereby presented.

  6. Surrogate fuel formulation for light naphtha combustion in advanced combustion engines

    KAUST Repository

    Ahmed, Ahfaz

    2015-03-30

    Crude oil once recovered is further separated in to several distinct fractions to produce a range of energy and chemical products. One of the less processed fractions is light naphtha (LN), hence they are more economical to produce than their gasoline and diesel counterparts. Recent efforts have demonstrated usage of LN as transportation fuel for internal combustion engines with slight modifications. In this study, a multicomponent surrogate fuel has been developed for light naphtha fuel using a multi-variable nonlinear constrained optimization scheme. The surrogate, consisting of palette species n-pentane, 2-methylhexane, 2-methylbutane, n-heptane and toluene, was validated against the LN using ignition quality tester following ASTM D6890 methodology. Comparison of LN and the surrogate fuel demonstrated satisfactory agreement.

  7. Enhanced CRISPR/Cas9-mediated biallelic genome targeting with dual surrogate reporter-integrated donors.

    Science.gov (United States)

    Wu, Yun; Xu, Kun; Ren, Chonghua; Li, Xinyi; Lv, Huijiao; Han, Furong; Wei, Zehui; Wang, Xin; Zhang, Zhiying

    2017-03-01

    The clustered regularly interspaced short palindromic repeat (CRISPR)/CRISPR-associated protein 9 (Cas9) system has recently emerged as a simple, yet powerful genome engineering tool, which has been widely used for genome modification in various organisms and cell types. However, screening biallelic genome-modified cells is often time-consuming and technically challenging. In this study, we incorporated two different surrogate reporter cassettes into paired donor plasmids, which were used as both the surrogate reporters and the knock-in donors. By applying our dual surrogate reporter-integrated donor system, we demonstrate high frequency of CRISPR/Cas9-mediated biallelic genome integration in both human HEK293T and porcine PK15 cells (34.09% and 18.18%, respectively). Our work provides a powerful genetic tool for assisting the selection and enrichment of cells with targeted biallelic genome modification. © 2017 Federation of European Biochemical Societies.

  8. Two-step nuclear reactions: The Surrogate Method, the Trojan Horse Method and their common foundations

    Energy Technology Data Exchange (ETDEWEB)

    Hussein, Mahir S. [DCTA, Instituto Tecnologico de Aeronautica, Sao Jose dos Campos, SP (Brazil); Universidade de Sao Paulo, Instituto de Estudos Avancados, C. P. 72012, Sao Paulo, SP (Brazil); Universidade de Sao Paulo, Instituto de Fisica, C. P. 66318, Sao Paulo, SP (Brazil)

    2017-05-15

    In this Letter I argue that the Surrogate Method, used to extract the fast neutron capture cross section on actinide target nuclei, which has important practical application for the next generation of breeder reactors, and the Trojan Horse Method employed to extract reactions of importance to nuclear astrophysics, have a common foundation, the Inclusive Non-Elastic Breakup (INEB) Theory. Whereas the Surrogate Method relies on the premise that the extracted neutron cross section in a (d, p) reaction is predominantly a compound-nucleus one, the Trojan Horse Method assumes a predominantly direct process for the secondary reaction induced by the surrogate fragment. In general, both methods contain both direct and compound contributions, and I show how these seemingly distinct methods are in fact the same but at different energies and different kinematic regions. The unifying theory is the rather well developed INEB theory. (orig.)

  9. Validating (d,pγ as a Surrogate for Neutron Capture

    Directory of Open Access Journals (Sweden)

    Ratkiewicz A.

    2015-01-01

    Full Text Available The r-process is responsible for creating roughly half of the elements heavier than iron. It has recently become understood that the rates at which neutron capture reactions proceed at late times in the r-process may dramatically affect the final abundance pattern. However, direct measurements of neutron capture reaction rates on exotic nuclei are exceptionally difficult, necessitating the development of indirect approaches such as the surrogate technique. The (d,pγ reaction at low energies was identified as a promising surrogate for the (n,γ reaction, as both reactions share many characteristics. We report on a program to validate (d,pγ as a surrogate for (n,γ using 95Mo as a target. The experimental campaign includes direct measurements of the γ-ray intensities from the decay of excited states populated in the 95Mo(n,γ and 95Mo(d,pγ reactions.

  10. Validating (d,pγ) as a surrogate for neutron capture

    Energy Technology Data Exchange (ETDEWEB)

    Ratkiewicz, A. [Rutgers Univ., New Brunswick, NJ (United States); Cizewski, J. A. [Rutgers Univ., New Brunswick, NJ (United States); Pain, S. D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Adekola, A. S. [Rutgers Univ., New Brunswick, NJ (United States); Burke, J. T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Casperson, R. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Fotiadis, Nikolaos [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); McCleskey, M. [Texas A & M Univ., College Station, TX (United States); Burcher, S. [Rutgers Univ., New Brunswick, NJ (United States); Shand, C. M [Rutgers Univ., New Brunswick, NJ (United States); Austin, R. A. E. [Saint Mary' s Univ., Halifax (Canada); Baugher, T. [Rutgers Univ., New Brunswick, NJ (United States); Carpenter, M. P. [Argonne National Lab. (ANL), Argonne, IL (United States); Devlin, Matthew James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Escher, J. E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hardy, S. [Rutgers Univ., New Brunswick, NJ (United States); Hatarik, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Howard, M. E. [Rutgers Univ., New Brunswick, NJ (United States); Hughes, R. O. [Univ. of Richmond, VA (United States); Jones, K. L. [Univ. of Tennessee, Knoxville, TN (United States); Kozub, R. L. [Tennessee Technological Univ., Cookeville, TN (United States); Lister, C. J. [Univ. of Massachusetts, Lowell, MA (United States); Manning, B. [Rutgers Univ., New Brunswick, NJ (United States); O' Donnell, John M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Peters, W. A. [oak ridge associated Univ., TN (United States); Ross, T. J. [Univ. of Richmond, VA (United States); Scielzo, N. D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Seweryniak, D. [Argonne National Lab. (ANL), Argonne, IL (United States); Zhu, S. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-02-13

    The r-process is responsible for creating roughly half of the elements heavier than iron. It has recently become understood that the rates at which neutron capture reactions proceed at late times in the r-process may dramatically affect the final abundance pattern. However, direct measurements of neutron capture reaction rates on exotic nuclei are exceptionally difficult, necessitating the development of indirect approaches such as the surrogate technique. The (d,pγ) reaction at low energies was identified as a promising surrogate for the (n,γ) reaction, as both reactions share many characteristics. We report on a program to validate (d,pγ) as a surrogate for (n,γ) using 95Mo as a target. The experimental campaign includes direct measurements of the γ-ray intensities from the decay of excited states populated in the 95Mo(n,γ) and 95Mo(d,pγ) reactions.

  11. Kinetic Modeling of Gasoline Surrogate Components and Mixtures under Engine Conditions

    Energy Technology Data Exchange (ETDEWEB)

    Mehl, M; Pitz, W J; Westbrook, C K; Curran, H J

    2010-01-11

    Real fuels are complex mixtures of thousands of hydrocarbon compounds including linear and branched paraffins, naphthenes, olefins and aromatics. It is generally agreed that their behavior can be effectively reproduced by simpler fuel surrogates containing a limited number of components. In this work, an improved version of the kinetic model by the authors is used to analyze the combustion behavior of several components relevant to gasoline surrogate formulation. Particular attention is devoted to linear and branched saturated hydrocarbons (PRF mixtures), olefins (1-hexene) and aromatics (toluene). Model predictions for pure components, binary mixtures and multicomponent gasoline surrogates are compared with recent experimental information collected in rapid compression machine, shock tube and jet stirred reactors covering a wide range of conditions pertinent to internal combustion engines (3-50 atm, 650-1200K, stoichiometric fuel/air mixtures). Simulation results are discussed focusing attention on the mixing effects of the fuel components.

  12. Two-step nuclear reactions: The Surrogate Method, the Trojan Horse Method and their common foundations

    Science.gov (United States)

    Hussein, Mahir S.

    2017-05-01

    In this Letter I argue that the Surrogate Method, used to extract the fast neutron capture cross section on actinide target nuclei, which has important practical application for the next generation of breeder reactors, and the Trojan Horse Method employed to extract reactions of importance to nuclear astrophysics, have a common foundation, the Inclusive Non-Elastic Breakup (INEB) Theory. Whereas the Surrogate Method relies on the premise that the extracted neutron cross section in a ( d, p) reaction is predominantly a compound-nucleus one, the Trojan Horse Method assumes a predominantly direct process for the secondary reaction induced by the surrogate fragment. In general, both methods contain both direct and compound contributions, and I show how these seemingly distinct methods are in fact the same but at different energies and different kinematic regions. The unifying theory is the rather well developed INEB theory.

  13. Neutron-induced cross sections of actinides via the surrogate-reaction method

    Directory of Open Access Journals (Sweden)

    Tveten G. M.

    2013-03-01

    Full Text Available The surrogate-reaction method is an indirect way of determining cross sections for reactions that proceed through a compound nucleus. This technique may enable neutron-induced cross sections to be extracted for short-lived nuclei that otherwise cannot be measured. However, the validity of the surrogate method for extracting capture cross sections has to be investigated. In this work we study the reactions 238U(d,p239U, 238U(3He,t238Np, 238U(3He,4He237U as surrogates for neutroninduced reactions on 238U, 237Np and 236U, respectively, for which good quality data exist. The experimental set-up enabled the measurement of fission and gamma-decay probabilities. First results are presented and discussed.

  14. Validating (d,p gamma) as a Surrogate for Neutron Capture

    Energy Technology Data Exchange (ETDEWEB)

    Ratkiewicz, A. [Rutgers University; Cizewski, J. A. [Rutgers University; Pain, S. [Oak Ridge National Laboratory (ORNL); Adekola, A. S. [Rutgers University; Burke, J. T. [Lawrence Livermore National Laboratory (LLNL); Casperson, R.J. [Lawrence Livermore National Laboratory (LLNL); Fotiades, N. [Los Alamos National Laboratory (LANL); McCleskey, M. [Texas A& M University; Burcher, S. [Rutgers University; Shand, C. M. [Rutgers Univ./Univ. of Surrey, UK; Austin, R. A. E. [Saint Mary’s University, Halifa, Canada; Baugher, T. [Rutgers University; Carpenter, M. P. [Argonne National Laboratory (ANL); Devlin, M. [Los Alamos National Laboratory (LANL); Escher, J. E. [Lawrence Livermore National Laboratory (LLNL); Hardy, S. [Rutgers Univ./Univ. of Surrey, UK; Hatarik, R. [Lawrence Livermore National Laboratory (LLNL); Howard, M. [Rutgers University; Hughes, R. [University of Richmond, VA; Jones, K. L. [University of Tennessee, Knoxville (UTK); Kozub, R. L. [Tennessee Technological University (TTU); Lister, C. J. [University of Massachusetts, Lowell; Manning, B. [Rutgers University; O' Donnell, J. M. [Los Alamos National Laboratory (LANL); Peters, W. A. [Oak Ridge Associated Universities (ORAU); Ross, T.J. [University of Richmond, VA; Scielzo, N.D. [Lawrence Livermore National Laboratory (LLNL); Seweryniak, D. [Argonne National Laboratory (ANL); Zhu, S. [Argonne National Laboratory (ANL)

    2015-01-01

    The r-process is responsible for creating roughly half of the elements heavier than iron. It has recently become understood that the rates at which neutron capture reactions proceed at late times in the rprocess may dramatically affect the final abundance pattern. However, direct measurements of neutron capture reaction rates on exotic nuclei are exceptionally difficult, necessitating the development of indirect approaches such as the surrogate technique. The (d,py) reaction at low energies was identified as a promising surrogate for the (n,y) reaction, as both reactions share many characteristics. We report on a program to validate (d,py) as a surrogate for (n,y) using 95Mo as a target. The experimental campaign includes direct measurements of the y-ray intensities from the decay of excited states populated in the 95Mo(n,y) and 95Mo(d,py) reactions.

  15. Adaptive surrogate modeling for response surface approximations with application to bayesian inference

    KAUST Repository

    Prudhomme, Serge

    2015-09-17

    Parameter estimation for complex models using Bayesian inference is usually a very costly process as it requires a large number of solves of the forward problem. We show here how the construction of adaptive surrogate models using a posteriori error estimates for quantities of interest can significantly reduce the computational cost in problems of statistical inference. As surrogate models provide only approximations of the true solutions of the forward problem, it is nevertheless necessary to control these errors in order to construct an accurate reduced model with respect to the observables utilized in the identification of the model parameters. Effectiveness of the proposed approach is demonstrated on a numerical example dealing with the Spalart–Allmaras model for the simulation of turbulent channel flows. In particular, we illustrate how Bayesian model selection using the adapted surrogate model in place of solving the coupled nonlinear equations leads to the same quality of results while requiring fewer nonlinear PDE solves.

  16. Calibration of an agricultural-hydrological model (RZWQM2) using surrogate global optimization

    Science.gov (United States)

    Xi, Maolong; Lu, Dan; Gui, Dongwei; Qi, Zhiming; Zhang, Guannan

    2017-01-01

    Robust calibration of an agricultural-hydrological model is critical for simulating crop yield and water quality and making reasonable agricultural management. However, calibration of the agricultural-hydrological system models is challenging because of model complexity, the existence of strong parameter correlation, and significant computational requirements. Therefore, only a limited number of simulations can be allowed in any attempt to find a near-optimal solution within an affordable time, which greatly restricts the successful application of the model. The goal of this study is to locate the optimal solution of the Root Zone Water Quality Model (RZWQM2) given a limited simulation time, so as to improve the model simulation and help make rational and effective agricultural-hydrological decisions. To this end, we propose a computationally efficient global optimization procedure using sparse-grid based surrogates. We first used advanced sparse grid (SG) interpolation to construct a surrogate system of the actual RZWQM2, and then we calibrate the surrogate model using the global optimization algorithm, Quantum-behaved Particle Swarm Optimization (QPSO). As the surrogate model is a polynomial with fast evaluation, it can be efficiently evaluated with a sufficiently large number of times during the optimization, which facilitates the global search. We calibrate seven model parameters against five years of yield, drain flow, and NO3-N loss data from a subsurface-drained corn-soybean field in Iowa. Results indicate that an accurate surrogate model can be created for the RZWQM2 with a relatively small number of SG points (i.e., RZWQM2 runs). Compared to the conventional QPSO algorithm, our surrogate-based optimization method can achieve a smaller objective function value and better calibration performance using a fewer number of expensive RZWQM2 executions, which greatly improves computational efficiency.

  17. Multimission Fuel-Burn Minimization in Aircraft Design: A Surrogate-Modeling Approach

    Science.gov (United States)

    Liem, Rhea Patricia

    Aerodynamic shape and aerostructural design optimizations that maximize the performance at a single flight condition result in designs with unacceptable off-design performance. While considering multiple flight conditions in the optimization improves the robustness of the designs, there is a need to develop a rational strategy for choosing the flight conditions and their relative emphases such that multipoint optimizations reflect the true objective function. In addition, there is a need to consider uncertain missions and flight conditions. In this thesis, the strategies to formulate the multipoint objective functions for aerodynamic shape and aerostructural optimization are presented. To determine the flight conditions and their corresponding weights, a novel surrogate-based mission analysis is developed to efficiently analyze hundreds of actual mission data to emulate their flight condition distribution. Using accurate and reliable surrogate models to approximate the aerodynamic coefficients used in the analysis makes this procedure computationally tractable. A mixture of experts (ME) approach is developed to overcome the limitations of conventional surrogate models in modeling the complex transonic drag profile. The ME approach combines multiple surrogate models probabilistically based on the divide-andconquer strategy. Using this model in the mission analysis significantly improves the range estimation accuracy, as compared to other conventional surrogate models. As expected, the multipoint aerodynamic shape and aerostructural optimizations demonstrate a consistent drag reduction, instead of the localized improvement by the single-point optimizations. The improved robustness in the multipoint optimized designs was also observed in terms of the improved range performance and more consistent fuel-burn reduction across the different missions. The results presented in this thesis show that the surrogate-model-assisted multipoint optimization produces a robust

  18. Surrogate analysis and index developer (SAID) tool and real-time data dissemination utilities

    Science.gov (United States)

    Domanski, Marian M.; Straub, Timothy D.; Wood, Molly S.; Landers, Mark N.; Wall, Gary R.; Brady, Steven J.

    2015-01-01

    The use of acoustic and other parameters as surrogates for suspended-sediment concentrations (SSC) in rivers has been successful in multiple applications across the Nation. Critical to advancing the operational use of surrogates are tools to process and evaluate the data along with the subsequent development of regression models from which real-time sediment concentrations can be made available to the public. Recent developments in both areas are having an immediate impact on surrogate research, and on surrogate monitoring sites currently in operation. The Surrogate Analysis and Index Developer (SAID) standalone tool, under development by the U.S. Geological Survey (USGS), assists in the creation of regression models that relate response and explanatory variables by providing visual and quantitative diagnostics to the user. SAID also processes acoustic parameters to be used as explanatory variables for suspended-sediment concentrations. The sediment acoustic method utilizes acoustic parameters from fixed-mount stationary equipment. The background theory and method used by the tool have been described in recent publications, and the tool also serves to support sediment-acoustic-index methods being drafted by the multi-agency Sediment Acoustic Leadership Team (SALT), and other surrogate guidelines like USGS Techniques and Methods 3-C4 for turbidity and SSC. The regression models in SAID can be used in utilities that have been developed to work with the USGS National Water Information System (NWIS) and for the USGS National Real-Time Water Quality (NRTWQ) Web site. The real-time dissemination of predicted SSC and prediction intervals for each time step has substantial potential to improve understanding of sediment-related water-quality and associated engineering and ecological management decisions.

  19. 膝关节置换术后规范化功能锻炼对病人膝关节功能恢复的影响%The effect of standardization functional exercise on knee joint functional recovery of patients after total knee arthroplasty

    Institute of Scientific and Technical Information of China (English)

    何春香; 陈冬玲; 钟滢; 谭颖

    2016-01-01

    目的 膝关节置换术病人术后通过规范化功能锻炼,观察其对病人膝关节功能恢复的影响.方法 把50例全膝关节置换术的病人设为实验组,实验组病人术后给予规范化功能锻炼,与上年度50例全膝关节置换术病人做比较,比较两组病人术后患侧膝关节功能恢复的情况.结果 术前膝关节评分和膝关节功能评分两组间无统计学差异(P>0.05);两组膝关节评分和膝关节功能评分术后2周有显著改善(P<0.01);术后2周两组膝关节评分和膝关节功能评分差异有统计学意义(P<0.05).结论 全膝关节置换术后病人采取规范化功能锻炼,对于膝关节功能的恢复有重要意义.%Objective To observe the effect of standardization functional exercise on knee joint functional recovery of patients after total knee arthroplasty.Methods 50 patients undergoing total knee arthroplasty as experimental group received postoperative standardization functional exercise,compared with 50 patients undergoing total knee arthroplasty previous year.Compared postoperative function recovery of knee joint of two groups.Results There were no statistically significant differences in knee joint score and knee joint function score before surgery between two groups (P>0.05),knee joint score and knee joint function score significantly improved 2 weeks after surgery in both two groups (P<0.01),there were statistically significant differences in knee joint score and knee joint function score 2 weeks after surgery between two groups (P<0.05).Conclusion Standardized functional exercise has important significance for the recovery of knee joint function in patients after total knee arthroplasty.

  20. Effectiveness of external respiratory surrogates for in vivo liver motion estimation

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Kai-Hsiang; Ho, Ming-Chih; Yeh, Chi-Chuan; Chen, Yu-Chien; Lian, Feng-Li; Lin, Win-Li; Yen, Jia-Yush; Chen, Yung-Yaw [Department of Electrical Engineering, National Taiwan University, Taipei 10617, Taiwan (China); Department of Surgery, National Taiwan University Hospital and College of Medicine, National Taiwan University, Taipei 10041, Taiwan (China); Graduate Institute of Biomedical Electronics and Bioinformatics, National Taiwan University, Taipei 10617, Taiwan (China); Department of Electrical Engineering, National Taiwan University, Taipei 10617, Taiwan (China); Institute of Biomedical Engineering, National Taiwan University, Taipei 10041, Taiwan (China); Department of Mechanical Engineering, National Taiwan University, Taipei 10617, Taiwan (China); Department of Electrical Engineering and Graduate Institute of Biomedical Electronics and Bioinformatics, National Taiwan University, Taipei 10617, Taiwan (China)

    2012-08-15

    Purpose: Due to low frame rate of MRI and high radiation damage from fluoroscopy and CT, liver motion estimation using external respiratory surrogate signals seems to be a better approach to track liver motion in real-time for liver tumor treatments in radiotherapy and thermotherapy. This work proposes a liver motion estimation method based on external respiratory surrogate signals. Animal experiments are also conducted to investigate related issues, such as the sensor arrangement, multisensor fusion, and the effective time period. Methods: Liver motion and abdominal motion are both induced by respiration and are proved to be highly correlated. Contrary to the difficult direct measurement of the liver motion, the abdominal motion can be easily accessed. Based on this idea, our study is split into the model-fitting stage and the motion estimation stage. In the first stage, the correlation between the surrogates and the liver motion is studied and established via linear regression method. In the second stage, the liver motion is estimated by the surrogate signals with the correlation model. Animal experiments on cases of single surrogate signal, multisurrogate signals, and long-term surrogate signals are conducted and discussed to verify the practical use of this approach. Results: The results show that the best single sensor location is at the middle of the upper abdomen, while multisurrogate models are generally better than the single ones. The estimation error is reduced from 0.6 mm for the single surrogate models to 0.4 mm for the multisurrogate models. The long-term validity of the estimation models is quite satisfactory within the period of 10 min with the estimation error less than 1.4 mm. Conclusions: External respiratory surrogate signals from the abdomen motion produces good performance for liver motion estimation in real-time. Multisurrogate signals enhance estimation accuracy, and the estimation model can maintain its accuracy for at least 10 min. This

  1. Religion and Spirituality in Surrogate Decision Making for Hospitalized Older Adults.

    Science.gov (United States)

    Geros-Willfond, Kristin N; Ivy, Steven S; Montz, Kianna; Bohan, Sara E; Torke, Alexia M

    2016-06-01

    We conducted semi-structured interviews with 46 surrogate decision makers for hospitalized older adults to characterize the role of spirituality and religion in decision making. Three themes emerged: (1) religion as a guide to decision making, (2) control, and (3) faith, death and dying. For religious surrogates, religion played a central role in end of life decisions. There was variability regarding whether God or humans were perceived to be in control; however, beliefs about control led to varying perspectives on acceptance of comfort-focused treatment. We conclude that clinicians should attend to religious considerations due to their impact on decision making.

  2. A Bayesian Surrogate Model for Rapid Time Series Analysis and Application to Exoplanet Observations

    CERN Document Server

    Ford, Eric B; Veras, Dimitri

    2011-01-01

    We present a Bayesian surrogate model for the analysis of periodic or quasi-periodic time series data. We describe a computationally efficient implementation that enables Bayesian model comparison. We apply this model to simulated and real exoplanet observations. We discuss the results and demonstrate some of the challenges for applying our surrogate model to realistic exoplanet data sets. In particular, we find that analyses of real world data should pay careful attention to the effects of uneven spacing of observations and the choice of prior for the "jitter" parameter.

  3. Using serum urate as a validated surrogate end point for flares in patients with gout

    DEFF Research Database (Denmark)

    Morillon, Melanie B; Stamp, Lisa; Taylor, William;

    2016-01-01

    INTRODUCTION: Gout is the most common inflammatory arthritis in men over 40 years of age. Long-term urate-lowering therapy is considered a key strategy for effective gout management. The primary outcome measure for efficacy in clinical trials of urate-lowering therapy is serum urate levels......, effectively acting as a surrogate for patient-centred outcomes such as frequency of gout attacks or pain. Yet it is not clearly demonstrated that the strength of the relationship between serum urate and clinically relevant outcomes is sufficiently strong for serum urate to be considered an adequate surrogate...

  4. Effect of a Disease-Specific Planning Intervention on Surrogate Understanding of Patient Goals for Future Medical Treatment

    Science.gov (United States)

    Kirchhoff, Karin T.; Hammes, Bernard J.; Kehl, Karen A.; Briggs, Linda A.; Brown, Roger L.

    2010-01-01

    Context Patients with life-limiting illnesses, and their families, struggle with complex treatment decisions as these patients approach the last few years of life. Surrogates often do not clearly understand the patient's goals for future medical treatments. Objectives To determine if a disease-specific planning process can improve surrogate understanding of such patient goals for future, medical treatments. Design, Setting, and Participants A multisite randomized controlled trial conducted between January 1, 2004 and July 31, 2007 in 6 outpatient clinics of large community or university health systems in 3 Wisconsin cities. Subjects were patients with either chronic congestive heart failure or chronic renal disease and their surrogate decision makers. Participants had to be competent, English-speaking adults at least 18 years of age. Intervention Trained health professionals conducted a structured, patient-centered interview intended to promote informed decision making and to result in the completion of a document clarifying the goals of the patient with regard to four disease-specific health outcome situations and to the degree of decision-making latitude granted to the surrogate. Measurements Surrogate understanding of patient goals for care with regard to four expected, disease-specific outcomes situations and of the degree of surrogate latitude in decision making. Results Three hundred thirteen patient-surrogate pairs completed the study. As measured by Kappa (κ) scores and in all four situations and in the degree of latitude, intervention group surrogates demonstrated a significantly higher degree of understanding of patient goals than control group surrogates. Intervention group κ scores ranged from 0.61 to 0.78, while control group κ scores ranged from 0.07 to 0.28. Conclusion Surrogates in the intervention group had a significantly better understanding of patient goals and preferences than surrogates in the control group. This finding is the first step

  5. Doubt and belief in physicians' ability to prognosticate during critical illness: the perspective of surrogate decision makers.

    Science.gov (United States)

    Zier, Lucas S; Burack, Jeffrey H; Micco, Guy; Chipman, Anne K; Frank, James A; Luce, John M; White, Douglas B

    2008-08-01

    Although discussing a prognosis is a duty of physicians caring for critically ill patients, little is known about surrogate decision-makers' beliefs about physicians' ability to prognosticate. We sought to determine: 1) surrogates' beliefs about whether physicians can accurately prognosticate for critically ill patients; and 2) how individuals use prognostic information in their role as surrogate decision-makers. Multicenter study in intensive care units of a public hospital, a tertiary care hospital, and a veterans' hospital. We conducted semistructured interviews with 50 surrogate decision-makers of critically ill patients. We analyzed the interview transcripts using grounded theory methods to inductively develop a framework to describe surrogates' beliefs about physicians' ability to prognosticate. Validation methods included triangulation by multidisciplinary analysis and member checking. Overall, 88% (44 of 50) of surrogates expressed doubt about physicians' ability to prognosticate for critically ill patients. Four distinct themes emerged that explained surrogates' doubts about prognostic accuracy: a belief that God could alter the course of the illness, a belief that predicting the future is inherently uncertain, prior experiences where physicians' prognostications were inaccurate, and experiences with prognostication during the patient's intensive care unit stay. Participants also identified several factors that led to belief in physicians' prognostications, such as receiving similar prognostic estimates from multiple physicians and prior experiences with accurate prognostication. Surrogates' doubts about prognostic accuracy did not prevent them from wanting prognostic information. Instead, most surrogate decision-makers view physicians' prognostications as rough estimates that are valuable in informing decisions, but are not determinative. Surrogates identified the act of prognostic disclosure as a key step in preparing emotionally and practically for the

  6. "Sizing Up" Codependency Recovery.

    Science.gov (United States)

    Messner, Beth A.

    1996-01-01

    Analyzes codependency related, self-help literature with a dramatistic lens to explore M. Beattie's bibliotherapeutic portrayal of codependency and codependency recovery. Depicts Beattie's "stylistic medicine" for codependency recovery as a three-step, rebirth experience: (1) recognize the codependent pollution within; (2) engage in…

  7. "Sizing Up" Codependency Recovery.

    Science.gov (United States)

    Messner, Beth A.

    1996-01-01

    Analyzes codependency related, self-help literature with a dramatistic lens to explore M. Beattie's bibliotherapeutic portrayal of codependency and codependency recovery. Depicts Beattie's "stylistic medicine" for codependency recovery as a three-step, rebirth experience: (1) recognize the codependent pollution within; (2) engage in…

  8. Discrediting microscopic pyuria and leucocyte esterase as diagnostic surrogates for infection in patients with lower urinary tract symptoms: results from a clinical and laboratory evaluation.

    Science.gov (United States)

    Kupelian, Anthony S; Horsley, Harry; Khasriya, Rajvinder; Amussah, Rasheedah T; Badiani, Raj; Courtney, Angela M; Chandhyoke, Nihil S; Riaz, Usama; Savlani, Karishma; Moledina, Malik; Montes, Samantha; O'Connor, Dominic; Visavadia, Rakhee; Kelsey, Michael; Rohn, Jennifer L; Malone-Lee, James

    2013-07-01

    WHAT'S KNOWN ON THE SUBJECT? AND WHAT DOES THE STUDY ADD?: Microscopic pyuria is widely used as a surrogate marker of infection, although there is little data supporting its use in patients who present with non-acute LUTS. The effects of urinary storage, preservation, and the use of laboratory methods to enhance leucocyte detection, are also unclear. This large, prospective study highlights the poor performance of dipstick urine analysis, and direct microscopy, as surrogate markers of UTI in patients with LUTS. A series of laboratory analyses also examine the effects of urine handling and processing on test integrity, which have important implications for clinical practice. To evaluate the diagnostic performance of pyuria as a surrogate marker of urinary tract infection (UTI) in patients with chronic lower urinary tract symptoms (LUTS), and determine the impact of sample storage, cytocentrifugation, and staining techniques, on test performance. Between 2008 and 2011, we recruited 1223 patients (120 men; 1103 women; mean age 54 years) with one or more LUTS from a specialist urological outpatient service. We conducted a prospective observational study to determine the performance of microscopic pyuria ≥10 wbc/μL as a surrogate marker of UTI in patients with LUTS. All patients provided clean-catch midstream urine (MSU) samples for analysis, and routine microbiological cultures were used as our reference standard. We also scrutinised the performance of dipstick leucocyte esterase ≥ 'trace' in the detection of microscopic pyuria. The influence of sample handling and processing on test performance was examined in a series of laboratory studies. The effects of storage on leucocyte decay were determined using repeated microscopic assessments of individual urine samples, to plot temporal changes in leucocyte numbers. This study used varied storage conditions (≈20 °C and 4 °C), and boric acid preservation. Paired microscopic assessments were used to determine

  9. 40 CFR 437.24 - New source performance standards (NSPS).

    Science.gov (United States)

    2010-07-01

    ... GUIDELINES AND STANDARDS THE CENTRALIZED WASTE TREATMENT POINT SOURCE CATEGORY Oils Treatment and Recovery..., TSS, arsenic, cadmium, chromium, cobalt, copper, lead, mercury, tin, zinc, butylbenzyl...

  10. 40 CFR 63.862 - Standards.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 10 2010-07-01 2010-07-01 false Standards. 63.862 Section 63.862... EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Chemical Recovery Combustion Sources at Kraft, Soda, Sulfite,...

  11. ['Gold standard', not 'golden standard'

    NARCIS (Netherlands)

    Claassen, J.A.H.R.

    2005-01-01

    In medical literature, both 'gold standard' and 'golden standard' are employed to describe a reference test used for comparison with a novel method. The term 'gold standard' in its current sense in medical research was coined by Rudd in 1979, in reference to the monetary gold standard. In the same w

  12. ['Gold standard', not 'golden standard'

    NARCIS (Netherlands)

    Claassen, J.A.H.R.

    2005-01-01

    In medical literature, both 'gold standard' and 'golden standard' are employed to describe a reference test used for comparison with a novel method. The term 'gold standard' in its current sense in medical research was coined by Rudd in 1979, in reference to the monetary gold standard. In the same

  13. Definitions and validation criteria for biomarkers and surrogate endpoints: development and testing of a quantitative hierarchical levels of evidence schema

    DEFF Research Database (Denmark)

    Lassere, Marissa N; Johnson, Kent R; Boers, Maarten

    2007-01-01

    OBJECTIVE: There are clear advantages to using biomarkers and surrogate endpoints, but concerns about clinical and statistical validity and systematic methods to evaluate these aspects hinder their efficient application. Our objective was to review the literature on biomarkers and surrogates to d...

  14. An Artificial Turf-Based Surrogate Surface Collector for the Direct Measurement of Atmospheric Mercury Dry Deposition

    Science.gov (United States)

    This paper describes the development of a new artificial turf surrogate surface (ATSS) sampler for use in the measurement of mercury (Hg) dry deposition. In contrast to many existing surrogate surface designs, the ATSS utilizes a three-dimensional deposition surface that may more...

  15. Permanent pixels : building blocks for the longevity of digital surrogates of historical photographs

    NARCIS (Netherlands)

    Van Horik, M.P.M.

    2005-01-01

    Within the context of long-term access to digital objects in general this dissertation takes the longevity of digital surrogates of historical photographs into consideration. For memory institutes digitisation of analogue source material, such as historical photographs, is an exciting way to open up

  16. PCA-derived respiratory motion surrogates from X-ray angiograms for percutaneous coronary interventions

    NARCIS (Netherlands)

    H. Ma (Hua); G. Dibildox (Gerardo); C. Schultz (Carl); E.S. Regar (Eveline); T.W. van Walsum (Theo)

    2015-01-01

    textabstractPurpose: Intraoperative coronary motion modeling with motion surrogates enables prospective motion prediction in X-ray angiograms (XA) for percutaneous coronary interventions. The motion of coronary arteries is mainly affected by patients breathing and heartbeat. Purpose of our work is t

  17. Testing for nonlinearity in time series: The method of surrogate data

    Energy Technology Data Exchange (ETDEWEB)

    Theiler, J.; Galdrikian, B.; Longtin, A. (Los Alamos National Lab., NM (United States)); Eubank, S.; Farmer, J.D. (Los Alamos National Lab., NM (United States) Santa Fe Inst., NM (United States))

    1991-01-01

    We describe a statistical approach for identifying nonlinearity in time series; in particular, we want to avoid claims of chaos when simpler models (such as linearly correlated noise) can explain the data. The method requires a careful statement of the null hypothesis which characterizes a candidate linear process, the generation of an ensemble of surrogate'' data sets which are similar to the original time series but consistent with the null hypothesis, and the computation of a discriminating statistic for the original and for each of the surrogate data sets. The idea is to test the original time series against the null hypothesis by checking whether the discriminating statistic computed for the original time series differs significantly from the statistics computed for each of the surrogate sets. We present algorithms for generating surrogate data under various null hypotheses, and we show the results of numerical experiments on artificial data using correlation dimension, Lyapunov exponent, and forecasting error as discriminating statistics. Finally, we consider a number of experimental time series -- including sunspots, electroencephalogram (EEG) signals, and fluid convection -- and evaluate the statistical significance of the evidence for nonlinear structure in each case. 56 refs., 8 figs.

  18. Family matters: effects of birth order, culture, and family dynamics on surrogate decision-making.

    Science.gov (United States)

    Su, Christopher T; McMahan, Ryan D; Williams, Brie A; Sharma, Rashmi K; Sudore, Rebecca L

    2014-01-01

    Cultural attitudes about medical decision-making and filial expectations may lead some surrogates to experience stress and family conflict. Thirteen focus groups with racially and ethnically diverse English and Spanish speakers from county and Veterans Affairs hospitals, senior centers, and cancer support groups were conducted to describe participants' experiences making serious or end-of-life decisions for others. Filial expectations and family dynamics related to birth order and surrogate decision-making were explored using qualitative, thematic content analysis, and overarching themes from focus group transcripts were identified. The mean age of the 69 participants was 69 ± 14, and 29% were African American, 26% were white, 26% were Asian or Pacific Islander, and 19% were Latino. Seventy percent of participants engaged in unprompted discussions about birth order and family dynamics. Six subthemes were identified within three overarching categories: communication (unspoken expectations and discussion of death as taboo), emotion (emotional stress and feelings of loneliness), and conflict (family conflict and potential solutions to prevent conflict). These findings suggest that birth order and family dynamics can have profound effects on surrogate stress and coping. Clinicians should be aware of potential unspoken filial expectations for firstborns and help facilitate communication between the patient, surrogate, and extended family to reduce stress and conflict.

  19. ASYMPTOTIC SURROGATE CONSTRAINT METHOD AND ITS CONVERGENCEFOR A CLASS OF SEMI-INFINITE PROGRAMMING

    Institute of Scientific and Technical Information of China (English)

    WanZhongping; WuGuoming

    1999-01-01

    A class of constrained semi infinite minimax problem is transformed into a simpleconstrained problem, by means of discretization decoraposirion and maximum entropy method,making use of surrogate constraint, The paper deals with the convergence of this asymptotic aI-proach method.

  20. Designing a Surrogate Fuel for Gas-to-Liquid Derived Diesel

    DEFF Research Database (Denmark)

    Choudhury, H. A.; Intikhab, S.; Kalakul, Sawitree

    2017-01-01

    loads, diesel fuel surpasses the total hydrocarbon (THC) emissions for both the surrogate and the GTL fuel. No significant variation in CO and CO2 emissions for MI-5, GTL diesel and conventional diesel is observed. Analysis of combustion as well as emission behavior of the fuels helps to understand...

  1. Oxidation of Alkane Rich Gasoline Fuels and their Surrogates in a Motored Engine

    KAUST Repository

    Shankar, Vijai S B

    2015-03-30

    The validation of surrogates formulated using a computational framework by Ahmed et al.[1]for two purely paraffinic gasoline fuels labelled FACE A and FACE C was undertaken in this study. The ability of these surrogate mixtures to be used in modelling LTC engines was accessed by comparison of their low temperature oxidation chemistry with that of the respective parent fuel as well as a PRF based on RON. This was done by testing the surrogate mixtures in a modified Cooperative Fuels Research (CFR) engine running in Controlled Autoignition Mode (CAI) mode. The engine was run at a constant speed of 600 rpm at an equivalence ratio of 0.5 with the intake temperature at 150 °C and a pressure of 98 kPa. The low temperature reactivity of the fuels were studied by varying the compression ratio of the engine from the point were very only small low temperature heat release was observed to a point beyond which auto-ignition of the fuel/air mixture occurred. The apparent heat release rates of different fuels was calculated from the pressure histories using first law analysis and the CA 50 times of the low temperature heat release (LTHR) were compared. The surrogates reproduced the cool flame behavior of the parent fuels better than the PRF across all compression ratios.

  2. Identification of the first surrogate agonists for the G protein-coupled receptor GPR132

    DEFF Research Database (Denmark)

    Shehata, Mohamed A.; Christensen, Hanna Belcik; Isberg, Vignir;

    2015-01-01

    -arrestin recruitment assay, and thereby identified the first disclosed surrogate GPR132 agonist 1 with a potency of 3.4 μM. This constitutes the first available pharmacological tool for the in vitro characterization of the orphan receptor GPR132. The testing of 32 analogs furthermore identified a number of compounds...

  3. A spinal cord surrogate with nanoscale porosity for in vitro simulations of restorative neurosurgical techniques

    Science.gov (United States)

    Gillies, G. T.; Wilhelm, T. D.; Humphrey, J. A. C.; Fillmore, H. L.; Holloway, K. L.; Broaddus, W. C.

    2002-10-01

    The development of strategies for the regrowth of axons through a section of damaged spinal cord could benefit from the availability of an in vitro model in which the potential clinical utility of candidate techniques could be assessed preliminarily. We have designed a spinal cord surrogate for this purpose; it uses 0.6% agarose gel as the parenchymal component and has a fibrous-like longitudinal structure. At this concentration, the pore size distribution of the homogeneous gel ranges from less than 10 nm to more than 1000 nm while the average pore size ranges from 100 to 300 nm. The average pore size is larger than that of the extracellular space in the tissues of the central nervous system, which is of the order of 20 nm. However, the addition of fibres to the surrogate gel model significantly modifies its longitudinal permeability, as assessed by monitoring the distribution of marker dye material during direct infusion into the surrogate. This makes the model useful for evaluating infusion-based techniques that will ultimately be employed for the delivery of growth factors and other agents to the growing axonal processes in injured spinal cord. The role foreseen for this type of surrogate in investigations of the nanomechanics of restorative neurosurgical procedures is discussed.

  4. Incorporating surrogate species and seascape connectivity to improve marine conservation outcomes.

    Science.gov (United States)

    Olds, Andrew D; Connolly, Rod M; Pitt, Kylie A; Maxwell, Paul S; Aswani, Shankar; Albert, Simon

    2014-08-01

    Conservation focuses on maintaining biodiversity and ecosystem functioning, but gaps in our knowledge of species biology and ecological processes often impede progress. For this reason, focal species and habitats are used as surrogates for multispecies conservation, but species-based approaches are not widely adopted in marine ecosystems. Reserves in the Solomon Islands were designed on the basis of local ecological knowledge to conserve bumphead parrotfish (Bolbometopon muricatum) and to protect food security and ecosystem functioning. Bumphead parrotfish are an iconic threatened species and may be a useful surrogate for multispecies conservation. They move across tropical seascapes throughout their life history, in a pattern of habitat use that is shared with many other species. We examined their value as a conservation surrogate and assessed the importance of seascape connectivity (i.e., the physical connectedness of patches in the seascape) among reefs, mangroves, and seagrass to marine reserve performance. Reserves were designed for bumphead parrotfish, but also enhanced the abundance of other species. Integration of local ecological knowledge and seascape connectivity enhanced the abundance of 17 other harvested fish species in local reserves. This result has important implications for ecosystem functioning and local villagers because many of these species perform important ecological processes and provide the foundation for extensive subsistence fisheries. Our findings suggest greater success in maintaining and restoring marine ecosystems may be achieved when they are managed to conserve surrogate species and preserve functional seascape connections. © 2014 Society for Conservation Biology.

  5. Determining neutron-capture cross sections via the surrogate reaction technique

    CERN Document Server

    Forssén, C; Escher, J; Hoffman, R D; Kelley, K

    2007-01-01

    Indirect methods play an important role in the determination of nuclear reaction cross sections that are hard to measure directly. In this paper we investigate the feasibility of using the so-called surrogate method to extract neutron-capture cross sections for low energy compound-nuclear reactions in spherical and near-spherical nuclei. We present the surrogate method and develop a statistical nuclear-reaction simulation to explore different approaches to utilize surrogate reaction data. We assess the success of each approach by comparing the extracted cross sections with a predetermined benchmark. In particular, we employ regional systematics of nuclear properties in the 34 <= Z <= 46 region to calculate (n,gamma) cross sections for a series of Zr isotopes, and to simulate a surrogate experiment and the extraction of the desired cross section. We identify one particular approach that may provide very useful estimates of the cross section, and we discuss some of the limitations of the method. General r...

  6. Evaluation of COPD Longitudinally to Identify Predictive Surrogate End-points (ECLIPSE)

    DEFF Research Database (Denmark)

    Vestbo, J; Anderson, W; Coxson, H O

    2008-01-01

    computed tomography, biomarker measurement (in blood, sputum, urine and exhaled breath condensate), health outcomes, body impedance, resting oxygen saturation and 6-min walking distance. Evaluation of COPD Longitudinally to Identify Predictive Surrogate End-points is the largest study attempting to better...

  7. Role of Volatility in the Development of JP-8 Surrogates for Diesel Engine Application

    Science.gov (United States)

    2014-01-01

    fuels have also been investigated in different types of experimental systems. Honnet [16] reported that the Aachen (n-decane/1,2,4-trimethylbenzene...indicated that the extinction characteristics of Aachen and modified Aachen (n-dodecane/1,2,4-trimethylbenzene) surrogate fuels agree well with JP-8 in

  8. Refined ambient PM2.5 exposure surrogates and the risk of myocardial infarction

    Science.gov (United States)

    Using a case-crossover study design and conditional logistic regression, we compared the relative odds of transmural (full-wall) myocardial infarction (MI) calculated using exposure surrogates that account for human activity patterns and the indoor transport of ambient PM2....

  9. Thermal Inactivation of Foodborne Enteric Viruses and Their Viral Surrogates in Foods.

    Science.gov (United States)

    Bozkurt, Hayriye; D'Souza, Doris H; Davidson, P Michael

    2015-08-01

    Foodborne viruses, in particular human norovirus and hepatitis A virus, are the most common causes of food-associated infections and foodborne illness outbreaks around the world. Since it is currently not possible to cultivate human noroviruses and the wild-type strain of hepatitis A virus in vitro, the use of a variety of viral surrogates is essential to determine appropriate thermal processing conditions to reduce the risk associated with their contamination of food. Therefore, the objectives of this review are to (i) present pertinent characteristics of enteric foodborne viruses and their viral surrogates, (ii) discuss the viral surrogates currently used in thermal inactivation studies and their significance and value, (iii) summarize available data on thermal inactivation kinetics of enteric viruses, (iv) discuss factors affecting the efficacy of thermal treatment, (v) discuss suggested mechanisms of thermal inactivation, and (vi) provide insights on foodborne enteric viruses and viral surrogates for future studies and industrial applications. The overall goal of this review is to contribute to the development of appropriate thermal processing protocols to ensure safe food for human consumption.

  10. Inactivation of HAV and norovirus surrogates within raw shellfish and other foods

    Science.gov (United States)

    High pressure processing can inactivate hepatitis A virus, (HAV) and the human norovirus surrogates, feline calicivirus (FCV) and murine norovirus (MNV), in foods such as oysters, strawberries, and green onions. A 5-min 400-Megapascals (MPa) treatment at 5 degrees C and a 1–min 400-MPa treatment at ...

  11. Inactivation of norovirus surrogates on surfaces and raspberries by steam-ultrasound treatment

    DEFF Research Database (Denmark)

    Schultz, Anna Charlotte; Uhrbrand, Katrine; Nørrung, Birgit

    2012-01-01

    treatment that combines pressurized steam and high-power ultrasound (steam-ultrasound) was assessed for its efficacy to inactivate human NoV surrogates: coliphage (MS2), feline calicivirus (FCV), and murine norovirus (MNV) inoculated on plastic surfaces and MS2 inoculated on fresh raspberries. The amounts...

  12. Alternative methods to determine infectivity of Tulane virus: a surrogate for human norovirus

    Science.gov (United States)

    Culturable animal caliciviruses are widely-used as surrogates for human norovirus (HuNoV), which can not replicate in cells. The infectivity of a culturable virus was traditionally determined by plaque assay and/or 50% tissue culture infectious dose (TCID50) assay, both of which are time-consuming ...

  13. Evaluation and Development of Chemical Kinetic Mechanism Reduction Scheme for Biodiesel and Diesel Fuel Surrogates

    DEFF Research Database (Denmark)

    Poon, Hiew Mun; Ng, Hoon Kiat; Gan, Suyin

    2013-01-01

    The aim of this study is to evaluate the existing chemical kinetic mechanism reduction techniques. From here, an appropriate reduction scheme was developed to create compact yet comprehensive surrogate models for both diesel and biodiesel fuels for diesel engine applications. The reduction techni...

  14. A surrogate-based approach for post-genomic partner identification

    Directory of Open Access Journals (Sweden)

    Giordano Tony

    2001-09-01

    Full Text Available Abstract Background Modern drug discovery is concerned with identification and validation of novel protein targets from among the 30,000 genes or more postulated to be present in the human genome. While protein-protein interactions may be central to many disease indications, it has been difficult to identify new chemical entities capable of regulating these interactions as either agonists or antagonists. Results In this paper, we show that peptide complements (or surrogates derived from highly diverse random phage display libraries can be used for the identification of the expected natural biological partners for protein and non-protein targets. Our examples include surrogates isolated against both an extracellular secreted protein (TNFβ and intracellular disease related mRNAs. In each case, surrogates binding to these targets were obtained and found to contain partner information embedded in their amino acid sequences. Furthermore, this information was able to identify the correct biological partners from large human genome databases by rapid and integrated computer based searches. Conclusions Modified versions of these surrogates should provide agents capable of modifying the activity of these targets and enable one to study their involvement in specific biological processes as a means of target validation for downstream drug discovery.

  15. Measurement of arterial wall thickness as a surrogate marker for atherosclerosis

    NARCIS (Netherlands)

    de Groot, E; Hovingh, GK; Wiegman, A; Duriez, P; Smit, AJ; Fruchart, JC; Kastelein, JJP

    2004-01-01

    Large observational studies and atherosclerosis regression trials of lipid-modifying pharmacotherapy have established that intima-media thickness of the carotid and femoral arteries, as measured noninvasively by B-mode ultrasound, is a valid surrogate marker for the progression of atherosclerotic di

  16. Space mapping interpolating surrogates for highly optimized EM-based design of microwave devices

    DEFF Research Database (Denmark)

    Bandler, John; Cheng, Qingsha; Dakroury, Sameh;

    2004-01-01

    A powerful optimization algorithm that incorporates Space Mapping (SM) and the new Output Space Mapping (OSM) to yield highly optimized results in a handful of fine model evaluations is presented. The new method employs an SM-based interpolating surrogate (SMIS) framework that aims at matching th...

  17. Differences in surrogate threshold effect estimates between original and simplified correlation-based validation approaches.

    Science.gov (United States)

    Schürmann, Christoph; Sieben, Wiebke

    2016-03-30

    Surrogate endpoint validation has been well established by the meta-analytical correlation-based approach as outlined in the seminal work of Buyse et al. (Biostatistics, 2000). Surrogacy can be assumed if strong associations on individual and study levels can be demonstrated. Alternatively, if an effect on a true endpoint is to be predicted from a surrogate endpoint in a new study, the surrogate threshold effect (STE, Burzykowski and Buyse, Pharmaceutical Statistics, 2006) can be used. In practice, as individual patient data (IPD) are hard to obtain, some authors use only aggregate data and perform simplified regression analyses. We are interested in to what extent such simplified analyses are biased compared with the ones from a full model with IPD. To this end, we conduct a simulation study with IPD and compute STEs from full and simplified analyses for varying data situations in terms of number of studies, correlations, variances and so on. In the scenarios considered, we show that, for normally distributed patient data, STEs derived from ordinary (weighted) linear regression generally underestimate STEs derived from the original model, whereas meta-regression often results in overestimation. Therefore, if individual data cannot be obtained, STEs from meta-regression may be used as conservative alternatives, but ordinary (weighted) linear regression should not be used for surrogate endpoint validation. Copyright © 2015 John Wiley & Sons, Ltd.

  18. Refined ambient PM2.5 exposure surrogates and the risk of myocardial infarction

    Science.gov (United States)

    Using a case-crossover study design and conditional logistic regression, we compared the relative odds of transmural (full-wall) myocardial infarction (MI) calculated using exposure surrogates that account for human activity patterns and the indoor transport of ambient PM2....

  19. Developmental biotechnology for aquaculture, with special reference to surrogate production in teleost fishes

    Science.gov (United States)

    Yamaha, Etsuro; Saito, Taiju; Goto-Kazeto, Rie; Arai, Katsutoshi

    2007-07-01

    This review introduces surrogate production as a new technique for fish-seed production in aquaculture. Surrogate production in fish is a technique used to obtain the gametes of a certain genotype through the gonad of another genotype. It is achieved by inducing germ-line chimerism between different species during early development. Primordial germ cells (PGCs) are the key material of this technique to induce germ-line chimera. In several species, it has been reported that PGCs differentiated from the blastomeres inherited some maternally supplied mRNA located in the terminal regions of the early cleavage furrows. PGCs from donor species (or strains) are isolated and transplanted into host species to induce the germ-line chimera. Four methods for inducing germ-line chimera are described: blastomere transplantation, blastoderm-graft transplantation, transplantation of PGC from the genital ridge, and transplantation visualised PGC with GFP fluorescence. Several problems preventing the successful induction of germ-line chimera in various fish species are discussed. Surrogate production, however, opens the possibility of efficient fish-seed production and effective breeding and transfer of biodiversity to an aquaculture strain. Conservation and efficient utilisation of genetic resources will be achieved through surrogate production combined with the cryopreservation of PGCs.

  20. Evidence against the use of surrogates for biomonitoring of Neotropical floodplains

    NARCIS (Netherlands)

    Padial, A.A.; Declerck, S.A.J.; De Meester, L.; Bonecker, C.C.; Lansac-Toha, F.A.; Rodrigues, L.C.; Takeda, A.; Train, S.; Velho, L.F.M.; Bini, L.M.S

    2012-01-01

    1. Community concordance measures the level of association between the compositional patterns shown by two groups of organisms. If strong community concordance occurs, one group could be used as a surrogate for another in conservation planning and biodiversity monitoring. In this study, we evaluated

  1. Atmospheric cold plasma iactivation of norovirus surrogates and native microbiota on blueberries

    Science.gov (United States)

    Cold plasma (CP) is an emerging, novel, nonthermal technology that can be used for surface decontamination of foods. This study investigated CP technology for the nonthermal inactivation of the human norovirus surrogates, Tulane virus (TV) and Murine Norovirus (MNV), as well as for background microb...

  2. Ovulation Statuses of Surrogate Gilts Are Associated with the Efficiency of Excellent Pig Cloning.

    Science.gov (United States)

    Huan, Yanjun; Hu, Kui; Xie, Bingteng; Shi, Yongqian; Wang, Feng; Zhou, Yang; Liu, Shichao; Huang, Bo; Zhu, Jiang; Liu, Zhongfeng; He, Yilong; Li, Jingyu; Kong, Qingran; Liu, Zhonghua

    2015-01-01

    Somatic cell nuclear transfer (SCNT) is an assisted reproductive technique that can produce multiple copies of excellent livestock. However, low cloning efficiency limits the application of SCNT. In this study, we systematically investigated the major influencing factors related to the overall cloning efficiency in pigs. Here, 13620 cloned embryos derived from excellent pigs were transferred into 79 surrogate gilts, and 119 live cloned piglets were eventually generated. During cloning, group of cloned embryos derived from excellent Landrace or Large white pigs presented no significant differences of cleavage and blastocyst rates, blastocyst cell numbers, surrogate pregnancy and delivery rates, average numbers of piglets born and alive and cloning efficiencies, and group of 101-150, 151-200 or 201-250 cloned embryos transferred per surrogate also displayed a similar developmental efficiency. When estrus stage of surrogate gilts was compared, group of embryo transfer on Day 2 of estrus showed significantly higher pregnancy rate, delivery rate, average number of piglets born, average alive piglet number or cloning efficiency than group on Day 1, Day 3, Day 4 or Day 5, respectively (Pcloning efficiency (Pcloning efficiency. And more, follicle puncture for preovulation, not transfer position shallowed for preovulation or deepened for postovulation, significantly improved the average number of piglets alive and cloning efficiency (Pcloning efficiency of excellent pigs, and follicle puncture, not transfer position change, improved cloning efficiency. This work would have important implications in preserving and breeding excellent livestock and improving the overall cloning efficiency.

  3. Domestic wastewater heat recovery

    OpenAIRE

    Veijola, T.

    2017-01-01

    The aim of this thesis is to study and explain the purpose and the function of drain water heat exchangers. The thesis goes over theory behind heat transfer and heat exchangers and presents the general solutions of domestic drain water heat recovery systems. Systems gone over in detail are the different general shower drain water heat recovery systems. Another part of the thesis is a case study of an actual shower drain water heat recovery system of a Finnish household. The purpose of th...

  4. Accounting standards

    NARCIS (Netherlands)

    Stellinga, B.; Mügge, D.

    2014-01-01

    The European and global regulation of accounting standards have witnessed remarkable changes over the past twenty years. In the early 1990s, EU accounting practices were fragmented along national lines and US accounting standards were the de facto global standards. Since 2005, all EU listed companie

  5. Comparison of buckwheat, red clover, and purple tansy as potential surrogate plants for use in semi-field pesticide risk assessments with Bombus impatiens

    Directory of Open Access Journals (Sweden)

    Angela E. Gradish

    2016-07-01

    Full Text Available Background. Bumble bees (Bombus spp. are important wild and managed pollinators. There is increased interest in incorporating data on bumble bees into risk assessments for pesticides, but standardized methods for assessing hazards of pesticides in semi-field and field settings have not yet been established for bumble bees. During semi-field studies, colonies are caged with pesticide-treated flowering surrogate plants, which must be attractive to foragers to ensure colony exposure to the test compound, and must produce an ample nectar and pollen to sustain colonies during testing. However, it is not known which plant(s are suitable for use in semi-field studies with bumble bees. Materials and Methods. We compared B. impatiens foraging activity and colony development on small plots of flowering buckwheat (Fagopyrum esculentum, var. common, red clover (Trifolium pratense, and purple tansy (Phacelia tanacetifolia under semi-field conditions to assess their suitability as surrogate plants for pesticide risk assessment studies with bumble bees. We also compared the growth characteristics and input requirements of each plant type. Results. All three plant types generally established and grew well. Red clover and purple tansy experienced significant weed pressure and/or insect pest damage. In contrast, pest pressure was extremely low in buckwheat. Overall, B. impatiens foraging activity was significantly greater on buckwheat plots than red clover or purple tansy, but plant type had no effect on number of individuals produced per colony or colony weight. Discussion. Because of the consistently high foraging activity and successful colony development observed on buckwheat plots, combined with its favourable growth characteristics and low maintenance requirements, we recommend buckwheat as a surrogate plant for use in semi-field pesticide toxicity assessments with B. impatiens.

  6. Measurement of Antioxidant Effects on the Auto-oxidation Kinetics of Methyl Oleate – Methyl Laurate Blend as a Surrogate Biodiesel System

    Directory of Open Access Journals (Sweden)

    Tjokorde Walmiki Samadhi

    2017-05-01

    Full Text Available This research investigates the feasibility of methyl oleate-methyl laurate blend as a surrogate biodiesel system which represents jatropha-coconut oil biodiesel, a potentially suitable formulation for tropical climate, to quantify the efficacy of antioxidant additives in terms of their kinetic parameters. This blend was tested by the Rancimat EN14112 standard method. The Rancimat tests results were used to determine the primary oxidation induction period (OIP and first-order rate constants and activation energies. Addition of BHT and EcotiveTM antioxidants reduces the rate constants (k, h-1 between 15 to 90% in the 50-200 ppm dose range, with EcotiveTM producing significantly lower k values. Higher dose reduces the rate constant, while oleate/laurate ratio produces no significant impact. Antioxidants increase the oxidation activation energy (Ea, kJ/mol by 180 to almost 400% relative to the non-antioxidant value of 27.0 kJ/mol. EcotiveTM exhibits lower Ea, implying that its higher efficacy stems from a better steric hindrance as apparent from its higher pre-exponential factors. The ability to quantify oxidation kinetic parameters is indicative of the usefulness of methyl oleate-laurate pure FAME blend as a biodiesel surrogate offering better measurement accuracy due to the absence of pre-existing antioxidants in the test samples. Copyright © 2017 BCREC GROUP. All rights reserved Received: 6th July 2016; Revised: 7th December 2016; Accepted: 30th January 2017 How to Cite: Samadhi, T.W., Hirotsu, T., Goto, S. (2017. Measurement of Antioxidant Effects on the Auto-oxidation Kinetics of Methyl Oleate-Methyl Laurate Blend as a Surrogate Biodiesel System. Bulletin of Chemical Reaction Engineering & Catalysis, 12 (2: 157-166 (doi:10.9767/bcrec.12.2.861.157-166 Permalink/DOI: http://dx.doi.org/10.9767/bcrec.12.2.861.157-166

  7. Comparison of buckwheat, red clover, and purple tansy as potential surrogate plants for use in semi-field pesticide risk assessments with Bombus impatiens

    Science.gov (United States)

    Cutler, G. Christopher; Frewin, Andrew J.; Scott-Dupree, Cynthia D.

    2016-01-01

    Background. Bumble bees (Bombus spp.) are important wild and managed pollinators. There is increased interest in incorporating data on bumble bees into risk assessments for pesticides, but standardized methods for assessing hazards of pesticides in semi-field and field settings have not yet been established for bumble bees. During semi-field studies, colonies are caged with pesticide-treated flowering surrogate plants, which must be attractive to foragers to ensure colony exposure to the test compound, and must produce an ample nectar and pollen to sustain colonies during testing. However, it is not known which plant(s) are suitable for use in semi-field studies with bumble bees. Materials and Methods. We compared B. impatiens foraging activity and colony development on small plots of flowering buckwheat (Fagopyrum esculentum, var. common), red clover (Trifolium pratense), and purple tansy (Phacelia tanacetifolia) under semi-field conditions to assess their suitability as surrogate plants for pesticide risk assessment studies with bumble bees. We also compared the growth characteristics and input requirements of each plant type. Results. All three plant types generally established and grew well. Red clover and purple tansy experienced significant weed pressure and/or insect pest damage. In contrast, pest pressure was extremely low in buckwheat. Overall, B. impatiens foraging activity was significantly greater on buckwheat plots than red clover or purple tansy, but plant type had no effect on number of individuals produced per colony or colony weight. Discussion. Because of the consistently high foraging activity and successful colony development observed on buckwheat plots, combined with its favourable growth characteristics and low maintenance requirements, we recommend buckwheat as a surrogate plant for use in semi-field pesticide toxicity assessments with B. impatiens. PMID:27478712

  8. Quantitative GPCR and ion channel transcriptomics in primary alveolar macrophages and macrophage surrogates

    Directory of Open Access Journals (Sweden)

    Groot-Kormelink Paul J

    2012-10-01

    Full Text Available Abstract Background Alveolar macrophages are one of the first lines of defence against invading pathogens and play a central role in modulating both the innate and acquired immune systems. By responding to endogenous stimuli within the lung, alveolar macrophages contribute towards the regulation of the local inflammatory microenvironment, the initiation of wound healing and the pathogenesis of viral and bacterial infections. Despite the availability of protocols for isolating primary alveolar macrophages from the lung these cells remain recalcitrant to expansion in-vitro and therefore surrogate cell types, such as monocyte derived macrophages and phorbol ester-differentiated cell lines (e.g. U937, THP-1, HL60 are frequently used to model macrophage function. Methods The availability of high throughput gene expression technologies for accurate quantification of transcript levels enables the re-evaluation of these surrogate cell types for use as cellular models of the alveolar macrophage. Utilising high-throughput TaqMan arrays and focussing on dynamically regulated families of integral membrane proteins, we explore the similarities and differences in G-protein coupled receptor (GPCR and ion channel expression in alveolar macrophages and their widely used surrogates. Results The complete non-sensory GPCR and ion channel transcriptome is described for primary alveolar macrophages and macrophage surrogates. The expression of numerous GPCRs and ion channels whose expression were hitherto not described in human alveolar macrophages are compared across primary macrophages and commonly used macrophage cell models. Several membrane proteins known to have critical roles in regulating macrophage function, including CXCR6, CCR8 and TRPV4, were found to be highly expressed in macrophages but not expressed in PMA-differentiated surrogates. Conclusions The data described in this report provides insight into the appropriate choice of cell models for

  9. Mitigating Errors in External Respiratory Surrogate-Based Models of Tumor Position

    Energy Technology Data Exchange (ETDEWEB)

    Malinowski, Kathleen T. [Department of Radiation Oncology, University of Maryland School of Medicine, Baltimore, MD (United States); Fischell Department of Bioengineering, University of Maryland, College Park, MD (United States); McAvoy, Thomas J. [Fischell Department of Bioengineering, University of Maryland, College Park, MD (United States); Department of Chemical and Biomolecular Engineering and Institute of Systems Research, University of Maryland, College Park, MD (United States); George, Rohini [Department of Radiation Oncology, University of Maryland School of Medicine, Baltimore, MD (United States); Dieterich, Sonja [Department of Radiation Oncology, Stanford University School of Medicine, Stanford, CA (United States); D' Souza, Warren D., E-mail: wdsou001@umaryland.edu [Department of Radiation Oncology, University of Maryland School of Medicine, Baltimore, MD (United States); Fischell Department of Bioengineering, University of Maryland, College Park, MD (United States)

    2012-04-01

    Purpose: To investigate the effect of tumor site, measurement precision, tumor-surrogate correlation, training data selection, model design, and interpatient and interfraction variations on the accuracy of external marker-based models of tumor position. Methods and Materials: Cyberknife Synchrony system log files comprising synchronously acquired positions of external markers and the tumor from 167 treatment fractions were analyzed. The accuracy of Synchrony, ordinary-least-squares regression, and partial-least-squares regression models for predicting the tumor position from the external markers was evaluated. The quantity and timing of the data used to build the predictive model were varied. The effects of tumor-surrogate correlation and the precision in both the tumor and the external surrogate position measurements were explored by adding noise to the data. Results: The tumor position prediction errors increased during the duration of a fraction. Increasing the training data quantities did not always lead to more accurate models. Adding uncorrelated noise to the external marker-based inputs degraded the tumor-surrogate correlation models by 16% for partial-least-squares and 57% for ordinary-least-squares. External marker and tumor position measurement errors led to tumor position prediction changes 0.3-3.6 times the magnitude of the measurement errors, varying widely with model algorithm. The tumor position prediction errors were significantly associated with the patient index but not with the fraction index or tumor site. Partial-least-squares was as accurate as Synchrony and more accurate than ordinary-least-squares. Conclusions: The accuracy of surrogate-based inferential models of tumor position was affected by all the investigated factors, except for the tumor site and fraction index.

  10. Evaluating β Diversity as a Surrogate for Species Representation at Fine Scale.

    Directory of Open Access Journals (Sweden)

    Paul Beier

    Full Text Available Species turnover or β diversity is a conceptually attractive surrogate for conservation planning. However, there has been only 1 attempt to determine how well sites selected to maximize β diversity represent species, and that test was done at a scale too coarse (2,500 km2 sites to inform most conservation decisions. We used 8 plant datasets, 3 bird datasets, and 1 mammal dataset to evaluate whether sites selected to span β diversity will efficiently represent species at finer scale (sites sizes < 1 ha to 625 km2. We used ordinations to characterize dissimilarity in species assemblages (β diversity among plots (inventory data or among grid cells (atlas data. We then selected sites to maximize β diversity and used the Species Accumulation Index, SAI, to evaluate how efficiently the surrogate (selecting sites for maximum β diversity represented species in the same taxon. Across all 12 datasets, sites selected for maximum β diversity represented species with a median efficiency of 24% (i.e., the surrogate was 24% more effective than random selection of sites, and an interquartile range of 4% to 41% efficiency. β diversity was a better surrogate for bird datasets than for plant datasets, and for atlas datasets with 10-km to 14-km grid cells than for atlas datasets with 25-km grid cells. We conclude that β diversity is more than a mere descriptor of how species are distributed on the landscape; in particular β diversity might be useful to maximize the complementarity of a set of sites. Because we tested only within-taxon surrogacy, our results do not prove that β diversity is useful for conservation planning. But our results do justify further investigation to identify the circumstances in which β diversity performs well, and to evaluate it as a cross-taxon surrogate.

  11. Compositional effects on PAH and soot formation in counterflow diffusion flames of gasoline surrogate fuels

    KAUST Repository

    Park, Sungwoo

    2017-02-05

    Gasoline surrogate fuels are widely used to understand the fundamental combustion properties of complex refinery gasoline fuels. In this study, the compositional effects on polycyclic aromatic hydrocarbons (PAHs) and soot formation were investigated experimentally for gasoline surrogate mixtures comprising n-heptane, iso-octane, and toluene in counterflow diffusion flames. A comprehensive kinetic model for the gasoline surrogate mixtures was developed to accurately predict the fuel oxidation along with the formation of PAHs and soot in flames. This combined model was first tested against ignition delay times and laminar burning velocities data. The proposed model for the formation and growth of PAHs up to coronene (C24H12) was based on previous studies and was tested against existing and present new experimental data. Additionally, in the accompanied soot model, PAHs with sizes larger than (including) pyrene were used for the inception of soot particles, followed by particle coagulations and PAH condensation/chemical reactions on soot surfaces. The major pathways for the formation of PAHs were also identified for the surrogate mixtures. The model accurately captures the synergistic PAH formation characteristics observed experimentally for n-heptane/toluene and iso-octane/toluene binary mixtures. Furthermore, the present experimental and modeling results also elucidated different trends in the formation of larger PAHs and soot between binary n-heptane/iso-octane and ternary n-heptane/iso-octane/toluene mixtures. Propargyl radicals (C3H3) were shown to be important in the formation and growth of PAHs for n-heptane/iso-octane mixtures when the iso-octane concentration increased; however, reactions involving benzyl radicals (C6H5CH2) played a significant role in the formation of PAHs for n-heptane/iso-octane/toluene mixtures. These results indicated that the formation of PAHs and subsequently soot was strongly affected by the composition of gasoline surrogate mixtures.

  12. A case study on the use of appropriate surrogates for antecedent moisture conditions (AMCs

    Directory of Open Access Journals (Sweden)

    G. A. Ali

    2010-06-01

    Full Text Available While a large number of non-linear hillslope and catchment rainfall-runoff responses have been attributed to the temporal variability in antecedent moisture conditions (AMCs, two problems emerge: 1 the difficulty of measuring AMCs, and 2 the absence of explicit guidelines for the choice of surrogates or proxies for AMCs. This paper aims at determining whether or not multiple surrogates for AMCs should be used in order not to bias our understanding of a system hydrological behaviour. We worked in a small forested catchment, the Hermine, where soil moisture has been measured at 121 different locations at four depths on 16 occasions. Without making any assumption on active processes, we used various linear and nonlinear regression models to evaluate the point-scale temporal relations between actual soil moisture contents and selected meteorological-based surrogates for AMCs. We then mapped the nature of the "best fit" model to identify 1 spatial clusters of soil moisture monitoring sites whose hydrological behaviour was similar, and 2 potential topographic influences on these behaviours. Two conclusions stood out. Firstly, it was shown that the sole reference to AMCs indices traditionally used in catchment hydrology, namely antecedent rainfall amounts summed over periods of seven or ten days, would have led to an incomplete understanding of the Hermine catchment dynamics. Secondly, the relationships between point-scale soil moisture content and surrogates for AMCs were not spatially homogeneous, thus revealing a mosaic of linear and nonlinear catchment "active" and "contributing" sources whose location was often controlled by surface terrain attributes or the topography of a soil-confining layer interface. These results represent a step forward in developing a hydrological conceptual model for the Hermine catchment as they indicate depth-specific processes and spatially-variable triggering conditions. Further investigations are, however, necessary

  13. Surrogate assisted multidisciplinary design optimization for an all-electric GEO satellite

    Science.gov (United States)

    Shi, Renhe; Liu, Li; Long, Teng; Liu, Jian; Yuan, Bin

    2017-09-01

    State-of-the-art all-electric geostationary earth orbit (GEO) satellites use electric thrusters to execute all propulsive duties, which significantly differ from the traditional all-chemical ones in orbit-raising, station-keeping, radiation damage protection, and power budget, etc. Design optimization task of an all-electric GEO satellite is therefore a complex multidisciplinary design optimization (MDO) problem involving unique design considerations. However, solving the all-electric GEO satellite MDO problem faces big challenges in disciplinary modeling techniques and efficient optimization strategy. To address these challenges, we presents a surrogate assisted MDO framework consisting of several modules, i.e., MDO problem definition, multidisciplinary modeling, multidisciplinary analysis (MDA), and surrogate assisted optimizer. Based on the proposed framework, the all-electric GEO satellite MDO problem is formulated to minimize the total mass of the satellite system under a number of practical constraints. Then considerable efforts are spent on multidisciplinary modeling involving geosynchronous transfer, GEO station-keeping, power, thermal control, attitude control, and structure disciplines. Since orbit dynamics models and finite element structural model are computationally expensive, an adaptive response surface surrogate based optimizer is incorporated in the proposed framework to solve the satellite MDO problem with moderate computational cost, where a response surface surrogate is gradually refined to represent the computationally expensive MDA process. After optimization, the total mass of the studied GEO satellite is decreased by 185.3 kg (i.e., 7.3% of the total mass). Finally, the optimal design is further discussed to demonstrate the effectiveness of our proposed framework to cope with the all-electric GEO satellite system design optimization problems. This proposed surrogate assisted MDO framework can also provide valuable references for other all

  14. Application of surrogate-based global optimization to aerodynamic design

    CERN Document Server

    Pérez, Esther

    2016-01-01

    Aerodynamic design, like many other engineering applications, is increasingly relying on computational power. The growing need for multi-disciplinarity and high fidelity in design optimization for industrial applications requires a huge number of repeated simulations in order to find an optimal design candidate. The main drawback is that each simulation can be computationally expensive – this becomes an even bigger issue when used within parametric studies, automated search or optimization loops, which typically may require thousands of analysis evaluations. The core issue of a design-optimization problem is the search process involved. However, when facing complex problems, the high-dimensionality of the design space and the high-multi-modality of the target functions cannot be tackled with standard techniques. In recent years, global optimization using meta-models has been widely applied to design exploration in order to rapidly investigate the design space and find sub-optimal solutions. Indeed, surrogat...

  15. Computing an upper bound on contact stress with surrogate duality

    Science.gov (United States)

    Xuan, Zhaocheng; Papadopoulos, Panayiotis

    2016-07-01

    We present a method for computing an upper bound on the contact stress of elastic bodies. The continuum model of elastic bodies with contact is first modeled as a constrained optimization problem by using finite elements. An explicit formulation of the total contact force, a fraction function with the numerator as a linear function and the denominator as a quadratic convex function, is derived with only the normalized nodal contact forces as the constrained variables in a standard simplex. Then two bounds are obtained for the sum of the nodal contact forces. The first is an explicit formulation of matrices of the finite element model, derived by maximizing the fraction function under the constraint that the sum of the normalized nodal contact forces is one. The second bound is solved by first maximizing the fraction function subject to the standard simplex and then using Dinkelbach's algorithm for fractional programming to find the maximum—since the fraction function is pseudo concave in a neighborhood of the solution. These two bounds are solved with the problem dimensions being only the number of contact nodes or node pairs, which are much smaller than the dimension for the original problem, namely, the number of degrees of freedom. Next, a scheme for constructing an upper bound on the contact stress is proposed that uses the bounds on the sum of the nodal contact forces obtained on a fine finite element mesh and the nodal contact forces obtained on a coarse finite element mesh, which are problems that can be solved at a lower computational cost. Finally, the proposed method is verified through some examples concerning both frictionless and frictional contact to demonstrate the method's feasibility, efficiency, and robustness.

  16. A surrogate method for comparison analysis of salivary concentrations of Xylitol-containing products

    Directory of Open Access Journals (Sweden)

    Zhou Lingmei

    2008-02-01

    Full Text Available Abstract Background Xylitol chewing gum has been shown to reduce Streptococcus mutans levels and decay. Two studies examined the presence and time course of salivary xylitol concentrations delivered via xylitol-containing pellet gum and compared them to other xylitol-containing products. Methods A within-subjects design was used for both studies. Study 1, adults (N = 15 received three xylitol-containing products (pellet gum (2.6 g, gummy bears (2.6 g, and commercially available stick gum (Koolerz, 3.0 g; Study 2, a second group of adults (N = 15 received three xylitol-containing products (pellet gum, gummy bears, and a 33% xylitol syrup (2.67 g. For both studies subjects consumed one xylitol product per visit with a 7-day washout between each product. A standardized protocol was followed for each product visit. Product order was randomly determined at the initial visit. Saliva samples (0.5 mL to 1.0 mL were collected at baseline and up to 10 time points (~16 min in length after product consumption initiated. Concentration of xylitol in saliva samples was analyzed using high-performance liquid chromatography. Area under the curve (AUC for determining the average xylitol concentration in saliva over the total sampling period was calculated for each product. Results In both studies all three xylitol products (Study 1: pellet gum, gummy bears, and stick gum; Study 2: pellet gum, gummy bears, and syrup had similar time curves with two xylitol concentration peaks during the sampling period. Study 1 had its highest mean peaks at the 4 min sampling point while Study 2 had its highest mean peaks between 13 to 16 minutes. Salivary xylitol levels returned to baseline at about 18 minutes for all forms tested. Additionally, for both studies the total AUC for the xylitol products were similar compared to the pellet gum (Study 1: pellet gum – 51.3 μg.min/mL, gummy bears – 59.6 μg.min/mL, and stick gum – 46.4 μg.min/mL; Study 2: pellet gum – 63.0

  17. Spatially Dispersed Employee Recovery

    DEFF Research Database (Denmark)

    Hvass, Kristian Anders; Torfadóttir, Embla

    2014-01-01

    Employee recovery addresses either employee well-being or management's practices in aiding employees in recovering themselves following a service failure. This paper surveys the cabin crew at a small, European, low-cost carrier and investigates employees' perceptions of management practices to aid...... personnel achieve service recovery. Employee recovery within service research often focuses on front-line employees that work in a fixed location, however a contribution to the field is made by investigating the recovery of spatially dispersed personnel, such as operational personnel in the transport sector......, who have a work place away from a fixed or central location and have minimal management contact. Results suggest that the support employees receive from management, such as recognition, information sharing, training, and strategic awareness are all important for spatially dispersed front...

  18. Recovery Action Mapping Tool

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Recovery Action Mapping Tool is a web map that allows users to visually interact with and query actions that were developed to recover species listed under the...

  19. Ecological recovery in ERA

    DEFF Research Database (Denmark)

    EFSA Scientific Committee (Scientific Committee); Topping, Christopher John

    2016-01-01

    recognises the importance of more integrated ERAs considering both the local and landscape scales, as well as the possible co-occurrence of multiple potential stressors that fall under the remit of EFSA, which are important when addressing ecological recovery. In this scientific opinion, the Scientific...... ecological recovery for any assessed products, and invasive alien species that are harmful for plant health. This framework proposes an integrative approach based on well-defined specific protection goals, scientific knowledge derived by means of experimentation, modelling and monitoring, and the selection...... Committee gathered scientific knowledge on the potential for the recovery of non-target organisms for the further development of ERA. Current EFSA guidance documents and opinions were reviewed on how ecological recovery is addressed in ERA schemes. In addition, this scientific opinion is based on expert...

  20. Enhanced oil recovery

    Energy Technology Data Exchange (ETDEWEB)

    Chakma, A.; Rafiq Islam, M.; Berruti, F.

    1991-01-01

    Some forty to sixty percent of the original oil in place typically remains trapped in the reservoir after primary and secondary recoveries. Enhanced oil recovery refers to the recovery of the residual oil by different techniques. Many of the existing and proposed enhanced oil recovery techniques require sound understanding of basic chemical engineering principles such as fluid flow, heat and mass transfer, interfacial phenomena etc. Chemical EOR techniques require a good understanding of interfacial phenomena, chemical reaction, multicomponent absorption. Understanding of the fundamentals of the various EOR processes is not adequate. EOR is increasingly attracting a growing number of chemical engineers and, as a result, some of the fundamental aspect of EOR are now being investigated. However, much more remains to be done and chemical engineers can play an important role in providing a better understanding of EOR fundamentals. This volume presents selected papers on EOR presented at AICHE meetings.

  1. A Bumpy Recovery

    Institute of Scientific and Technical Information of China (English)

    CHEN FENGYING

    2010-01-01

    @@ The world economic situation has been extremely complicated in 2010. This year saw fluctuating market confidence,changing commodity prices, imbalanced economic recovery, diverse economic policies, lingering trade protectionism, and fierce currency battles.

  2. Recovery Audit Program

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Recovery Audit Programs mission is to identify and correct Medicare improper payments through the efficient detection and collection of overpayments made on...

  3. Disaster Debris Recovery Database

    Data.gov (United States)

    U.S. Environmental Protection Agency — The US EPA Region 5 Disaster Debris Recovery Database includes public datasets of over 3,500 composting facilities, demolition contractors, haulers, transfer...

  4. Silver recovery system data

    Energy Technology Data Exchange (ETDEWEB)

    Boulineau, B.

    1991-08-26

    In August of 1990 the Savannah River Site Photography Group began testing on a different type of silver recovery system. This paper describes the baseline study and the different phases of installation and testing of the system.

  5. FEMA Disaster Recovery Centers

    Data.gov (United States)

    Department of Homeland Security — This is a search site for FEMA's Disaster Recovery Centers (DRC). A DRC is a readily accessible facility or mobile office set up by FEMA where applicants may go for...

  6. Is the best interest standard good for pediatrics?

    Science.gov (United States)

    Rhodes, Rosamond; Holzman, Ian R

    2014-10-01

    We argue that the "best interest standard" for surrogate decision-making is problematic for a number of reasons. First, reliance on the best interest standard is subjective. Second, it leads to behavior that is intolerant and polarizing. Third, appeals to the best interest standard are often vague and indeterminate. After all, cases are usually controversial precisely because reasonable people disagree about what is or is not in a child's best interest. We then recommend that, instead of the best interest standard, parents should be held to a standard that we call the "not unreasonable" standard. By that standard, parents' decisions would be respected unless they were deemed unreasonable. This recommendation would allow a greater range for parental discretion than the best interest standard. Copyright © 2014 by the American Academy of Pediatrics.

  7. Residual position errors of lymph node surrogates in breast cancer adjuvant radiotherapy: Comparison of two arm fixation devices and the effect of arm position correction

    Energy Technology Data Exchange (ETDEWEB)

    Kapanen, Mika [Department of Oncology, Tampere University Hospital (TAUH), Tampere (Finland); Department of Medical Physics, Tampere University Hospital (TAUH), Tampere (Finland); Laaksomaa, Marko, E-mail: Marko.Laaksomaa@pshp.fi [Department of Oncology, Tampere University Hospital (TAUH), Tampere (Finland); Skyttä, Tanja; Haltamo, Mikko; Pehkonen, Jani; Lehtonen, Turkka [Department of Oncology, Tampere University Hospital (TAUH), Tampere (Finland); Kellokumpu-Lehtinen, Pirkko-Liisa [Department of Oncology, Tampere University Hospital (TAUH), Tampere (Finland); Medical School, University of Tampere, Tampere (Finland); Hyödynmaa, Simo [Department of Medical Physics, Tampere University Hospital (TAUH), Tampere (Finland)

    2016-04-01

    Residual position errors of the lymph node (LN) surrogates and humeral head (HH) were determined for 2 different arm fixation devices in radiotherapy (RT) of breast cancer: a standard wrist-hold (WH) and a house-made rod-hold (RH). The effect of arm position correction (APC) based on setup images was also investigated. A total of 113 consecutive patients with early-stage breast cancer with LN irradiation were retrospectively analyzed (53 and 60 using the WH and RH, respectively). Residual position errors of the LN surrogates (Th1-2 and clavicle) and the HH were investigated to compare the 2 fixation devices. The position errors and setup margins were determined before and after the APC to investigate the efficacy of the APC in the treatment situation. A threshold of 5 mm was used for the residual errors of the clavicle and Th1-2 to perform the APC, and a threshold of 7 mm was used for the HH. The setup margins were calculated with the van Herk formula. Irradiated volumes of the HH were determined from RT treatment plans. With the WH and the RH, setup margins up to 8.1 and 6.7 mm should be used for the LN surrogates, and margins up to 4.6 and 3.6 mm should be used to spare the HH, respectively, without the APC. After the APC, the margins of the LN surrogates were equal to or less than 7.5/6.0 mm with the WH/RH, but margins up to 4.2/2.9 mm were required for the HH. The APC was needed at least once with both the devices for approximately 60% of the patients. With the RH, irradiated volume of the HH was approximately 2 times more than with the WH, without any dose constraints. Use of the RH together with the APC resulted in minimal residual position errors and setup margins for all the investigated bony landmarks. Based on the obtained results, we prefer the house-made RH. However, more attention should be given to minimize the irradiation of the HH with the RH than with the WH.

  8. “RéaNet”, the Internet utilization among surrogates of critically ill patients with sepsis

    Science.gov (United States)

    Porcher, Raphaël; Argaud, Laurent; Piquilloud, Lise; Guitton, Christophe; Tamion, Fabienne; Hraiech, Sami; Mira, Jean-Paul

    2017-01-01

    Context Health-related Internet utilization is common but its use by proxies of critically ill patients is unknown. Our objective was to describe the prevalence and the Internet utilization characteristics among surrogates of critically ill septic patients. We conducted a prospective observational study in French ICUs. Three survey instruments were used to describe ICU organization regarding information delivery, patients and surrogates characteristics. Results 169 surrogates of 146 septic patients hospitalized in 19 ICUs were included. One sixth of ICUs (n = 3, 16%) had their own website. Majority of patients were males (n = 100, 68%), aged 64±1 years old, with a SAPS2 score at 53±17 and required vasopressors (n = 117, 83%), mechanical ventilation (n = 116, 82%). More than one quarter required renal replacement therapy (n = 36, 26%). Majority of surrogates were female, in their fifties. Only one in five knew the word sepsis (n = 27, 16%). Majority of proxies internet users (n = 77; 55%) search on the internet about sepsis. The main motivation was curiosity. Majority of surrogates found the information online reliable, suitable for request and concordant. Prior use of health-related Internet (OR = 20.7 [4.30–100.1]), the presence of a nursing staff during family-physician meetings (OR = 3.33 [1.17–9.53]), a younger patient age (OR = 1.32 [1.01–1.72]) and renal replacement therapy requirement (OR = 2.58 [1.06–6.26]) were associated with health-related Internet use. Neither satisfaction with medical care or information provision, neither presence of anxiety-depression symptoms, were associated with health-related Internet use. Majority of surrogates (N = 76 (52%)) would have like receiving a list of selected websites on sepsis. Conclusions Majority of proxies of critically ill patients with sepsis use Internet to learn more about sepsis. Internet utilization is independent of satisfaction with global ICU care, perceived quality of information delivery by

  9. The NASA Langley Research Center's Unmanned Aerial System Surrogate Research Aircraft

    Science.gov (United States)

    Howell, Charles T., III; Jessup, Artie; Jones, Frank; Joyce, Claude; Sugden, Paul; Verstynen, Harry; Mielnik, John

    2010-01-01

    Research is needed to determine what procedures, aircraft sensors and other systems will be required to allow Unmanned Aerial Systems (UAS) to safely operate with manned aircraft in the National Airspace System (NAS). The NASA Langley Research Center has transformed a Cirrus Design SR22 general aviation (GA) aircraft into a UAS Surrogate research aircraft to serve as a platform for UAS systems research, development, flight testing and evaluation. The aircraft is manned with a Safety Pilot and systems operator that allows for flight operations almost anywhere in the NAS without the need for a Federal Aviation Administration (FAA) Certificate of Authorization (COA). The UAS Surrogate can be controlled from a modular, transportable ground station like a true UAS. The UAS Surrogate is able to file and fly in the NAS with normal traffic and is a better platform for real world UAS research and development than existing vehicles flying in restricted ranges or other sterilized airspace. The Cirrus Design SR22 aircraft is a small, singleengine, four-place, composite-construction aircraft that NASA Langley acquired to support NASA flight-research programs like the Small Aircraft Transportation System (SATS) Project. Systems were installed to support flight test research and data gathering. These systems include: separate research power; multi-function flat-panel displays; research computers; research air data and inertial state sensors; video recording; data acquisition; data-link; S-band video and data telemetry; Common Airborne Instrumentation System (CAIS); Automatic Dependent Surveillance-Broadcast (ADS-B); instrumented surfaces and controls; and a systems operator work station. The transformation of the SR22 to a UAS Surrogate was accomplished in phases. The first phase was to modify the existing autopilot to accept external commands from a research computer that was connected by redundant data-link radios to a ground control station. An electro-mechanical auto

  10. Surrogate model approach for improving the performance of reactive transport simulations

    Science.gov (United States)

    Jatnieks, Janis; De Lucia, Marco; Sips, Mike; Dransch, Doris

    2016-04-01

    Reactive transport models can serve a large number of important geoscientific applications involving underground resources in industry and scientific research. It is common for simulation of reactive transport to consist of at least two coupled simulation models. First is a hydrodynamics simulator that is responsible for simulating the flow of groundwaters and transport of solutes. Hydrodynamics simulators are well established technology and can be very efficient. When hydrodynamics simulations are performed without coupled geochemistry, their spatial geometries can span millions of elements even when running on desktop workstations. Second is a geochemical simulation model that is coupled to the hydrodynamics simulator. Geochemical simulation models are much more computationally costly. This is a problem that makes reactive transport simulations spanning millions of spatial elements very difficult to achieve. To address this problem we propose to replace the coupled geochemical simulation model with a surrogate model. A surrogate is a statistical model created to include only the necessary subset of simulator complexity for a particular scenario. To demonstrate the viability of such an approach we tested it on a popular reactive transport benchmark problem that involves 1D Calcite transport. This is a published benchmark problem (Kolditz, 2012) for simulation models and for this reason we use it to test the surrogate model approach. To do this we tried a number of statistical models available through the caret and DiceEval packages for R, to be used as surrogate models. These were trained on randomly sampled subset of the input-output data from the geochemical simulation model used in the original reactive transport simulation. For validation we use the surrogate model to predict the simulator output using the part of sampled input data that was not used for training the statistical model. For this scenario we find that the multivariate adaptive regression splines

  11. "RéaNet", the Internet utilization among surrogates of critically ill patients with sepsis.

    Science.gov (United States)

    Nguyen, Yên-Lan; Porcher, Raphaël; Argaud, Laurent; Piquilloud, Lise; Guitton, Christophe; Tamion, Fabienne; Hraiech, Sami; Mira, Jean-Paul

    2017-01-01

    Health-related Internet utilization is common but its use by proxies of critically ill patients is unknown. Our objective was to describe the prevalence and the Internet utilization characteristics among surrogates of critically ill septic patients. We conducted a prospective observational study in French ICUs. Three survey instruments were used to describe ICU organization regarding information delivery, patients and surrogates characteristics. 169 surrogates of 146 septic patients hospitalized in 19 ICUs were included. One sixth of ICUs (n = 3, 16%) had their own website. Majority of patients were males (n = 100, 68%), aged 64±1 years old, with a SAPS2 score at 53±17 and required vasopressors (n = 117, 83%), mechanical ventilation (n = 116, 82%). More than one quarter required renal replacement therapy (n = 36, 26%). Majority of surrogates were female, in their fifties. Only one in five knew the word sepsis (n = 27, 16%). Majority of proxies internet users (n = 77; 55%) search on the internet about sepsis. The main motivation was curiosity. Majority of surrogates found the information online reliable, suitable for request and concordant. Prior use of health-related Internet (OR = 20.7 [4.30-100.1]), the presence of a nursing staff during family-physician meetings (OR = 3.33 [1.17-9.53]), a younger patient age (OR = 1.32 [1.01-1.72]) and renal replacement therapy requirement (OR = 2.58 [1.06-6.26]) were associated with health-related Internet use. Neither satisfaction with medical care or information provision, neither presence of anxiety-depression symptoms, were associated with health-related Internet use. Majority of surrogates (N = 76 (52%)) would have like receiving a list of selected websites on sepsis. Majority of proxies of critically ill patients with sepsis use Internet to learn more about sepsis. Internet utilization is independent of satisfaction with global ICU care, perceived quality of information delivery by doctors or the existence of anxiety

  12. Development of Depletion Code Surrogate Models for Uncertainty Propagation in Scenario Studies

    Science.gov (United States)

    Krivtchik, Guillaume; Coquelet-Pascal, Christine; Blaise, Patrick; Garzenne, Claude; Le Mer, Joël; Freynet, David

    2014-06-01

    The result of transition scenario studies, which enable the comparison of different options of the reactor fleet evolution and management of the future fuel cycle materials, allow to perform technical and economic feasibility studies. The COSI code is developed by CEA and used to perform scenario calculations. It allows to model any fuel type, reactor fleet, fuel facility, and permits the tracking of U, Pu, minor actinides and fission products nuclides on a large time scale. COSI is coupled with the CESAR code which performs the depletion calculations based on one-group cross-section libraries and nuclear data. Different types of uncertainties have an impact on scenario studies: nuclear data and scenario assumptions. Therefore, it is necessary to evaluate their impact on the major scenario results. The methodology adopted to propagate these uncertainties throughout the scenario calculations is a stochastic approach. Considering the amount of inputs to be sampled in order to perform a stochastic calculation of the propagated uncertainty, it appears necessary to reduce the calculation time. Given that evolution calculations represent approximately 95% of the total scenario simulation time, an optimization can be done, with the development and implementation of a surrogate models library of CESAR in COSI. The input parameters of CESAR are sampled with URANIE, the CEA uncertainty platform, and for every sample, the isotopic composition after evolution evaluated with CESAR is stored. Then statistical analysis of the input and output tables allow to model the behavior of CESAR on each CESAR library, i.e. building a surrogate model. Several quality tests are performed on each surrogate model to insure the prediction power is satisfying. Afterward, a new routine implemented in COSI reads these surrogate models and using them in replacement of CESAR calculations. A preliminary study of the calculation time gain shows that the use of surrogate models allows stochastic

  13. Prediction models of long-term leaching behavior and leaching mechanism of glass components and surrogated nuclides in radioactive vitrified waste forms

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Y. C.; Lee, K. S. [Department of Industrial Environment and Health, Yonsei University, Wonju (Korea, Republic of); Kim, I. T.; Kim, H. T.; Kim, J. H. [Korea Atomic Energy Research Institute (KAERI), Taejon (Korea, Republic of)

    1999-07-01

    Melting solidification is considered to be a perspective technology for stabilizing incineration ash remaining after incineration of combustible radioactive waste since it has the advantage of improving the physicochemical properties of waste forms. Final waste forms should be characterized to determine the degree to which they fulfills the acceptance criteria of the disposal facility. Chemical durability (leaching resistance) is known to be the most important factor in the assessment of waste forms. In this study, vitrified waste forms are manufactured and characterized. Feed materials consist of simulated radioactive incineration ash and base-glass with different mixing ratios. To assess the chemical durability of vitrified waste forms, the International Standard Organization (ISO) leach test has been conducted at 70 degree C with deionized distilled water as a leachant for 820 days, and the concentrations of glass components and surrogates in the leachates are then analyzed. Two models for predicting long-term leaching behavior of glass components and radionuclides in a glass form are applied to the leached data after 820 days. The model including a fitted parameter from the longer experimental data shows more accuracy, however, the model with shorter leaching test results offers the advantage of being able to predict the long-term behavior from the short-term experimental data. The leaching mechanisms of surrogates and glass components were also investigated by using two semi-empirical kinetic models and were found to be dissolution with diffusion. (author)

  14. Communications standards

    CERN Document Server

    Stokes, A V

    1986-01-01

    Communications Standards deals with the standardization of computer communication networks. This book examines the types of local area networks (LANs) that have been developed and looks at some of the relevant protocols in more detail. The work of Project 802 is briefly discussed, along with a protocol which has developed from one of the LAN standards and is now a de facto standard in one particular area, namely the Manufacturing Automation Protocol (MAP). Factors that affect the usage of networks, such as network management and security, are also considered. This book is divided into three se

  15. Fabrication and Characterization of Surrogate TRISO Particles Using 800μm ZrO2 Kernels

    Energy Technology Data Exchange (ETDEWEB)

    Jolly, Brian C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Helmreich, Grant [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Cooley, Kevin M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Dyer, John [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Terrani, Kurt [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-07-01

    In support of fully ceramic microencapsulated (FCM) fuel development, coating development work is ongoing at Oak Ridge National Laboratory (ORNL) to produce tri-structural isotropic (TRISO) coated fuel particles with both UN kernels and surrogate (uranium-free) kernels. The nitride kernels are used to increase fissile density in these SiC-matrix fuel pellets with details described elsewhere. The surrogate TRISO particles are necessary for separate effects testing and for utilization in the consolidation process development. This report focuses on the fabrication and characterization of surrogate TRISO particles which use 800μm in diameter ZrO2 microspheres as the kernel.

  16. The different surrogate measures of adiposity in relation to semen quality and serum reproductive hormone levels among Estonian fertile men.

    Science.gov (United States)

    Ehala-Aleksejev, K; Punab, M

    2015-03-01

    The objective of this study was to investigate the relations of basic semen parameters and reproductive hormones with different surrogate measures of adiposity: body mass index (BMI), body fat percentage (BF%), waist circumference (WC) and waist-to-height ratio (WHtR). Standard semen analysis was performed and serum levels of reproductive hormones were measured in 260 male partners of pregnant women at a university hospital andrology centres in Estonia. Quartile analysis revealed that all adiposity markers were negatively related to sex hormone-binding globulin and total testosterone levels. After adjustment for covariates a high BF%, WC and WHtR were negatively associated with total sperm count. The BF% was also negatively related to semen volume. These significant changes occurred from a BF% ≥ 23.4%, WC > 98 cm and WHtR > 0.54. Next to these changes the BMI was not related to sperm parameters. This study shows that semen quality is affected by central adiposity and confirms earlier findings that adiposity markedly changes serum sex hormone levels. Further studies are required to find out what is the best body composition marker showing most clearly the relationships between adiposity, semen characteristics and sex hormone levels.

  17. Achieving Standardization

    DEFF Research Database (Denmark)

    Henningsson, Stefan

    2014-01-01

    competitive, national customs and regional economic organizations are seeking to establish a standardized solution for digital reporting of customs data. However, standardization has proven hard to achieve in the socio-technical e-Customs solution. In this chapter, the authors identify and describe what has...

  18. Achieving Standardization

    DEFF Research Database (Denmark)

    Henningsson, Stefan

    2016-01-01

    competitive, national customs and regional economic organizations are seeking to establish a standardized solution for digital reporting of customs data. However, standardization has proven hard to achieve in the socio-technical e-Customs solution. In this chapter, the authors identify and describe what has...

  19. Improved method for quantifying the avicide 3-chloro-p-toluidine hydrochloride in bird tissues using a deuterated surrogate/GC/MS method

    Science.gov (United States)

    Stahl, R.S.; Custer, T.W.; Pochop, P.A.; Johnston, J.J.

    2002-01-01

    A method using a deuterated surrogate of the avicide 3-chloro-p-toluidine hydrochloride (CPTH) was developed to quantify the CPTH residues in the gastrointestinal (Gl) tract and breast muscle tissues in birds collected in CPTH-baited sunflower and rice fields. This method increased the range of a previous surrogate/gas chromatography/mass spectroscopy method from 0-2 to 0-20mug/g in tissue samples and greatly simplified the extraction procedure. The modified method also sought to increase recoveries over a range of matrix effects introduced by analyzing tissues from birds collected in the field, where the GI tract contents would be affected by varying diet. The new method was used to determine the CPTH concentration In GI tract samples fortified with CPTH-treated rice bait to simulate the consumption of varying amounts of treated bait by two nontargeted bird species, pigeon (Columbia livia) and house sparrow (Passer domesticus). The new method was then used to examine the CPTH concentrations in the gizzard contents of the targeted bird species, red-winged black bird (Agelaius phoeniceus) and brown-headed cowbird (Molothrus ater) that were collected after feeding at a treated bait site. The method proved sufficiently sensitive to quantify CPTH in the breast muscle tissues and the gizzard contents of red-winged blackbirds and brown-headed cowbirds during an operational baiting program. The levels of CPTH determined for these birds in both tissue samples were determined to be highly correlated. The appearance of CPTH in the breast muscle tissue immediately after feeding was not anticipated. The potential secondary hazard posed by the targeted birds to potential scavengers and predators was also evaluated.

  20. Recovery efficiencies for Burkholderia thailandensis from various aerosol sampling media

    Directory of Open Access Journals (Sweden)

    Paul eDabisch

    2012-06-01

    Full Text Available Burkholderia thailandensis is used in the laboratory as a surrogate of the more virulent B. pseudomallei. Since inhalation is believed to be a natural route of infection for B. pseudomallei, many animal studies with B. pseudomallei and B. thailandensis utilize the inhalation route of exposure. The aim of the present study was to quantify the recovery efficiency of culturable B. thailandensis from several common aerosol sampling devices to ensure that collected microorganisms could be reliably recovered post-collection. The sampling devices tested included 25-mm gelatin filters, 25-mm stainless steel disks used in Mercer cascade impactors, and two types of glass impingers. The results demonstrate that while several processing methods tested resulted in significantly lower physical recovery efficiencies than other methods, it was possible to obtain culturable recovery efficiencies for B. thailandensis and physical recovery efficiencies for 1 μm fluorescent spheres of at least 0.95 from all of the sampling media tested given an appropriate sample processing procedure. The results of the present study also demonstrated that the bubbling action of liquid media in all-glass impingers (AGIs can result in physical loss of material from the collection medium, although additional studies are needed to verify the exact mechanisms involved. Overall, the results of this study demonstrate that the collection mechanism as well as the post-collection processing method can significantly affect the recovery from and retention of culturable microorganisms in sampling media, potentially affecting the calculated airborne concentration and any subsequent estimations of risk or dose derived from such data.

  1. Detailed chemical kinetic mechanism for the oxidation of biodiesel fuels blend surrogate.

    Energy Technology Data Exchange (ETDEWEB)

    Herbinet, O; Pitz, W J; Westbrook, C K

    2009-07-21

    Detailed chemical kinetic mechanisms were developed and used to study the oxidation of two large unsaturated esters: methyl-5-decenoate and methyl-9-decenoate. These models were built from a previous methyl decanoate mechanism and were compared with rapeseed oil methyl esters oxidation experiments in a jet stirred reactor. A comparative study of the reactivity of these three oxygenated compounds was performed and the differences in the distribution of the products of the reaction were highlighted showing the influence of the presence and the position of a double bond in the chain. Blend surrogates, containing methyl decanoate, methyl-5-decenoate, methyl-9-decenoate and n-alkanes, were tested against rapeseed oil methyl esters and methyl palmitate/n-decane experiments. These surrogate models are realistic kinetic tools allowing the study of the combustion of biodiesel fuels in diesel and homogeneous charge compression ignition engines.

  2. Anthropometric surrogates for screening of low birth weight newborns: a community-based study.

    Science.gov (United States)

    Rustagi, Neeti; Prasuna, J G; Taneja, D K

    2012-03-01

    In developing countries, where about 75% of births occur at home or in the community, logistic problems prevent the weighing of every newborn child. This study compares various anthropometric surrogates for identification of low birth weight neonates. A longitudinal community based study was done in an urban resettlement colony and 283 singleton neonates within 7 days of birth were examined for the anthropometric measurements such as head, chest, mid upper arm circumference and foot length as a screening tool for low birth weight. Chest circumference measured within 7 days of birth appeared to be the most appropriate surrogate of low birth weight with highest sensitivity (75.4%), specificity (78.4%), and positive predictive value (48.9%) as compared with other anthropometric parameters. Low birth weight neonates in absence of weighing scales can be early identified by using simple anthropometric measurements for enhanced home-based care and timely referral.

  3. Quantum dynamics of a vibronically coupled linear chain using a surrogate Hamiltonian approach.

    Science.gov (United States)

    Lee, Myeong H; Troisi, Alessandro

    2016-06-07

    Vibronic coupling between the electronic and vibrational degrees of freedom has been reported to play an important role in charge and exciton transport in organic photovoltaic materials, molecular aggregates, and light-harvesting complexes. Explicitly accounting for effective vibrational modes rather than treating them as a thermal environment has been shown to be crucial to describe the effect of vibronic coupling. We present a methodology to study dissipative quantum dynamics of vibronically coupled systems based on a surrogate Hamiltonian approach, which is in principle not limited by Markov approximation or weak system-bath interaction, using a vibronic basis. We apply vibronic surrogate Hamiltonian method to a linear chain system and discuss how different types of relaxation process, intramolecular vibrational relaxation and intermolecular vibronic relaxation, influence population dynamics of dissipative vibronic systems.

  4. Pseudo-periodic surrogate test to sample time series in stochastic softening Duffing oscillator

    Energy Technology Data Exchange (ETDEWEB)

    Gan Chunbiao [Department of Mechanics, CMEE, Zhejiang University, Hangzhou 310027 (China)]. E-mail: cb_gan@zju.edu.cn

    2006-09-11

    Identification of typical noise-contaminated sample response is a hard task in a nonlinear system under stochastic background since irregularity of the sample response may come from measure noise, dynamical noise, or nonlinear effect, etc., and conventional dynamical methods are generally not useful. Here, the pseudo-periodic surrogate algorithm by Small is employed to test the sample time series in the softening Duffing oscillator under the Gaussian white noise excitation. The correlation dimensions of the noisy periodic and the noise-induced chaotic time series of the system are compared with those of their corresponding surrogate data respectively, the leading Lyapunov exponents by Rosenstein's algorithm are also presented for comparison.

  5. Fast surrogate-assisted simulation-driven optimization of compact microwave hybrid couplers

    Science.gov (United States)

    Kurgan, Piotr; Koziel, Slawomir

    2016-07-01

    This work presents a robust methodology for expedited simulation-driven design optimization of compact microwave hybrid couplers. The technique relies on problem decomposition, and a bottom-up design strategy, starting from the level of basic building blocks of the coupler, and finishing with a tuning procedure that exploits a fast surrogate model of the entire structure. The latter is constructed by cascading local response surface approximations of coupler elementary elements. The cross-coupling effects within the structure are neglected in the first stage of the design process; however, they are accounted for in the tuning phase by means of space-mapping correction of the surrogate. The proposed approach is demonstrated through the design of a compact rat-race and two branch-line couplers. In all cases, the computational cost of the optimization process is very low and corresponds to just a few high-fidelity electromagnetic simulations of respective structures. Experimental validation is also provided.

  6. Will higher traffic flow lead to more traffic conflicts? A crash surrogate metric based analysis.

    Science.gov (United States)

    Kuang, Yan; Qu, Xiaobo; Yan, Yadan

    2017-01-01

    In this paper, we aim to examine the relationship between traffic flow and potential conflict risks by using crash surrogate metrics. It has been widely recognized that one traffic flow corresponds to two distinct traffic states with different speeds and densities. In view of this, instead of simply aggregating traffic conditions with the same traffic volume, we represent potential conflict risks at a traffic flow fundamental diagram. Two crash surrogate metrics, namely, Aggregated Crash Index and Time to Collision, are used in this study to represent the potential conflict risks with respect to different traffic conditions. Furthermore, Beijing North Ring III and Next Generation SIMulation Interstate 80 datasets are utilized to carry out case studies. By using the proposed procedure, both datasets generate similar trends, which demonstrate the applicability of the proposed methodology and the transferability of our conclusions.

  7. Adaptive Surrogate Modeling for Response Surface Approximations with Application to Bayesian Inference

    KAUST Repository

    Prudhomme, Serge

    2015-01-07

    The need for surrogate models and adaptive methods can be best appreciated if one is interested in parameter estimation using a Bayesian calibration procedure for validation purposes. We extend here our latest work on error decomposition and adaptive refinement for response surfaces to the development of surrogate models that can be substituted for the full models to estimate the parameters of Reynolds-averaged Navier-Stokes models. The error estimates and adaptive schemes are driven here by a quantity of interest and are thus based on the approximation of an adjoint problem. We will focus in particular to the accurate estimation of evidences to facilitate model selection. The methodology will be illustrated on the Spalart-Allmaras RANS model for turbulence simulation.

  8. Neutron capture surrogate reaction on 75As in inverse kinematics using (d,pγ

    Directory of Open Access Journals (Sweden)

    Smith M.S.

    2010-03-01

    Full Text Available The 75As(d,pγ reaction in inverse kinematics as a surrogate for neutron capture was performed at Oak Ridge National Laboratory using a deuterated plastic target. The intensity of the 165 keV γ-ray from 76As in coincidence with ejected protons, from exciting 76As above the neutron separation energy populating a compound state, was measured. A tight geometry of four segmented germanium clover γ-ray detectors together with eight ORRUBA-type silicon-strip charged-particle detectors was used to optimize geometric acceptance. The preliminary analysis of the 75As experiment, and the eïňČcacy and future plans of the (d,pγ surrogate campaign in inverse kinematics, are discussed.

  9. Determination of Diethyl Phthalate and Polyhexamethylene Guanidine in Surrogate Alcohol from Russia

    Directory of Open Access Journals (Sweden)

    Yulia B. Monakhova

    2011-01-01

    Full Text Available Analytical methods based on spectroscopic techniques were developed and validated for the determination of diethyl phthalate (DEP and polyhexamethylene guanidine (PHMG, which may occur in unrecorded alcohol. Analysis for PHMG was based on UV-VIS spectrophotometry after derivatization with Eosin Y and 1H NMR spectroscopy of the DMSO extract. Analysis of DEP was performed with direct UV-VIS and 1H NMR methods. Multivariate curve resolution and spectra computation methods were used to confirm the presence of PHMG and DEP in the investigated beverages. Of 22 analysed alcohol samples, two contained DEP or PHMG. 1H NMR analysis also revealed the presence of signals of hawthorn extract in three medicinal alcohols used as surrogate alcohol. The simple and cheap UV-VIS methods can be used for rapid screening of surrogate alcohol samples for impurities, while 1H NMR is recommended for specific confirmatory analysis if required.

  10. Efficient stochastic EMC/EMI analysis using HDMR-generated surrogate models

    KAUST Repository

    Yücel, Abdulkadir C.

    2011-08-01

    Stochastic methods have been used extensively to quantify effects due to uncertainty in system parameters (e.g. material, geometrical, and electrical constants) and/or excitation on observables pertinent to electromagnetic compatibility and interference (EMC/EMI) analysis (e.g. voltages across mission-critical circuit elements) [1]. In recent years, stochastic collocation (SC) methods, especially those leveraging generalized polynomial chaos (gPC) expansions, have received significant attention [2, 3]. SC-gPC methods probe surrogate models (i.e. compact polynomial input-output representations) to statistically characterize observables. They are nonintrusive, that is they use existing deterministic simulators, and often cost only a fraction of direct Monte-Carlo (MC) methods. Unfortunately, SC-gPC-generated surrogate models often lack accuracy (i) when the number of uncertain/random system variables is large and/or (ii) when the observables exhibit rapid variations. © 2011 IEEE.

  11. Uncertainty propagation through an aeroelastic wind turbine model using polynomial surrogates

    DEFF Research Database (Denmark)

    Murcia Leon, Juan Pablo; Réthoré, Pierre-Elouan Mikael; Dimitrov, Nikolay Krasimirov

    2017-01-01

    Polynomial surrogates are used to characterize the energy production and lifetime equivalent fatigue loads for different components of the DTU 10 MW reference wind turbine under realistic atmospheric conditions. The variability caused by different turbulent inflow fields are captured by creating......-alignment. The methodology presented extends the deterministic power and thrust coefficient curves to uncertainty models and adds new variables like damage equivalent fatigue loads in different components of the turbine. These surrogate models can then be implemented inside other work-flows such as: estimation...... of the uncertainty in annual energy production due to wind resource variability and/or robust wind power plant layout optimization. It can be concluded that it is possible to capture the global behavior of a modern wind turbine and its uncertainty under realistic inflow conditions using polynomial response surfaces...

  12. Neutron capture surrogate reaction on 75As in inverse kinematics using (d,pγ)

    Science.gov (United States)

    Peters, W. A.; Cizewski, J. A.; Hatarik, R.; O'Malley, P. D.; Jones, K. L.; Schmitt, K.; Moazen, B. H.; Chae, K. Y.; Pittman, S. T.; Kozub, R. L.; Vieira, D.; Jandel, M.; Wilhelmy, J. B.; Matei, C.; Escher, J.; Bardayan, D. W.; Pain, S. D.; Smith, M. S.

    2010-03-01

    The 75As(d,pγ) reaction in inverse kinematics as a surrogate for neutron capture was performed at Oak Ridge National Laboratory using a deuterated plastic target. The intensity of the 165 keV γ-ray from 76As in coincidence with ejected protons, from exciting 76As above the neutron separation energy populating a compound state, was measured. A tight geometry of four segmented germanium clover γ-ray detectors together with eight ORRUBA-type silicon-strip charged-particle detectors was used to optimize geometric acceptance. The preliminary analysis of the 75As experiment, and the efficacy and future plans of the (d,pγ) surrogate campaign in inverse kinematics, are discussed.

  13. Neutron Capture Surrogate Reaction on 75As in Inverse Kinematics Using (d,p(gamma))

    Energy Technology Data Exchange (ETDEWEB)

    Peters, W A; Cizewski, J A; Hatarik, R; O?Malley, P D; Jones, K L; Schmitt, K; Moazen, B H; Chae, K Y; Pittman, S T; Kozub, R L; Vieira, D; Jandel, M; Wilhelmy, J B; Matei, C; Escher, J; Bardayan, D W; Pain, S D; Smith, M S

    2009-11-09

    The {sup 75}As(d,p{gamma}) reaction in inverse kinematics as a surrogate for neutron capture was performed at Oak Ridge National Laboratory using a deuterated plastic target. The intensity of the 165 keV {gamma}-ray from {sup 76}As in coincidence with ejected protons, from exciting {sup 76}As above the neutron separation energy populating a compound state, was measured. A tight geometry of four segmented germanium clover {gamma}-ray detectors together with eight ORRUBA-type silicon-strip charged-particle detectors was used to optimize geometric acceptance. The preliminary analysis of the {sup 75}As experiment, and the efficacy and future plans of the (d,p{gamma}) surrogate campaign in inverse kinematics, are discussed.

  14. Neutron capture surrogate reaction on 75As in inverse kinematics using (d,p )

    Energy Technology Data Exchange (ETDEWEB)

    Peters, W. A. [Rutgers University; Cizewski, J. A. [Rutgers University; Hatarik, Robert [Rutgers University; O' Malley, Patrick [Rutgers University; Jones, K. L. [University of Tennessee; Schmitt, Kyle [University of Tennessee; Moazen, Brian [University of Tennessee; Chae, K. Y. [University of Tennessee; Pittman, S. T. [University of Tennessee, Knoxville (UTK); Kozub, R. L. [Tennessee Technological University; Vieira, D. J. [Los Alamos National Laboratory (LANL); Jandel, M. [Los Alamos National Laboratory (LANL); Wilhelmy, J. B. [Los Alamos National Laboratory (LANL); Matei, Catalin [Oak Ridge Associated Universities (ORAU); Escher, J. [Lawrence Livermore National Laboratory (LLNL); Bardayan, Daniel W [ORNL; Pain, Steven D [ORNL; Smith, Michael Scott [ORNL

    2010-01-01

    The 75As(d,p ) reaction in inverse kinematics as a surrogate for neutron capture was performed at Oak Ridge National Laboratory using a deuterated plastic target. The intensity of the 165 keV -ray from 76As in coincidence with ejected protons, from exciting 76As above the neutron separation energy populating a compound state, was measured. A tight geometry of four segmented germanium clover -ray detectors together with eight ORRUBA-type silicon-strip charged-particle detectors were used to optimize geometric acceptance. The preliminary analysis of the 75As experiment and the ecacy and future plans of the (d,p ) surrogate campaign in inverse kinematics are discussed.

  15. Surrogate modelling and optimization using shape-preserving response prediction: A review

    Science.gov (United States)

    Leifsson, Leifur; Koziel, Slawomir

    2016-03-01

    Computer simulation models are ubiquitous in modern engineering design. In many cases, they are the only way to evaluate a given design with sufficient fidelity. Unfortunately, an added computational expense is associated with higher fidelity models. Moreover, the systems being considered are often highly nonlinear and may feature a large number of designable parameters. Therefore, it may be impractical to solve the design problem with conventional optimization algorithms. A promising approach to alleviate these difficulties is surrogate-based optimization (SBO). Among proven SBO techniques, the methods utilizing surrogates constructed from corrected physics-based low-fidelity models are, in many cases, the most efficient. This article reviews a particular technique of this type, namely, shape-preserving response prediction (SPRP), which works on the level of the model responses to correct the underlying low-fidelity models. The formulation and limitations of SPRP are discussed. Applications to several engineering design problems are provided.

  16. Testing of organic waste surrogate materials in support of the Hanford organic tank program. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Turner, D.A. [Westinghouse Hanford Co., Richland, WA (United States); Miron, Y. [Bureau of Mines (United States)

    1994-01-01

    To address safety issues regarding effective waste management efforts of underground organic waste storage tanks at the Hanford Site, the Bureau of Mines conducted a series of tests, at the request of the Westinghouse Hanford company. In this battery of tests, the thermal and explosive characteristics of surrogate materials, chosen by Hanford, were determined. The surrogate materials were mixtures of inorganic and organic sodium salts, representing fuels and oxidants. The oxidants were sodium nitrate and sodium nitrite. The fuels were sodium salts of oxalate, citrate and ethylenediamine tetraacetic acid (EDTA). Polyethylene powder was also used as a fuel with the oxidant(s). Sodium aluminate was used as a diluent. In addition, a sample of FeCN, supplied by Hanford was also investigated.

  17. Multiobjective Optimization Design of Double-Row Blades Hydraulic Retarder with Surrogate Model

    Directory of Open Access Journals (Sweden)

    Liu Chunbao

    2015-02-01

    Full Text Available For the design of double-row blades hydraulic retarder involves too many parameters, the solution process of the optimal parameter combination is characterized by the large calculation load, the long calculation time, and the high cost. In this paper, we proposed a multiobjective optimization method to obtain the optimal balanced solution between the braking torque and volume of double-row blades hydraulic retarder. Moreover, we established the surrogate model for objective function with radial basis function (RBF, thus avoiding the time-consuming three-dimensional modeling and fluid simulation. Then, nondominated sorting genetic algorithm-II (NSGA-II was adopted to obtain the optimal combination solution of design variables. Moreover, the comparison results of computational fluid dynamics (CFD values of the optimal combination parameters and original design parameters indicated that the multiobjective optimization method based on surrogate model was applicable for the design of double-row blades hydraulic retarder.

  18. Determination of neutron-induced fission cross-sections of unstable nuclei via surrogate reaction method

    Indian Academy of Sciences (India)

    B K Nayak

    2014-11-01

    Heavy ion reaction studies around Coulomb barrier energies have been generally used to investigate the effect of the structure of projectile/target on reaction dynamics. Other than providing an understanding of basic physics of the reaction dynamics, some of these reactions have been used as tools to serve as surrogates of neutron-induced compound nuclear fission cross-sections involving unstable targets. In this paper, we report some of the recent results on the determination of neutron-induced fission cross-sections of unstable actinides present in Th–U and U–Pu fuel cycles by surrogate reaction method by employing transfer-induced fission studies with 6,7Li beams.

  19. Non-HDL-cholesterol as valid surrogate to apolipoprotein B100 measurement in diabetes: Discriminant Ratio and unbiased equivalence

    Directory of Open Access Journals (Sweden)

    Ahn Sylvie A

    2011-02-01

    Full Text Available Abstract Background Apolipoprotein B100 (apoB is a superior indicator of CV risk than total or LDL-C. Non-HDL-C represents a simple surrogate for apoB in hypertriglyceridemic and/or T2DM patients. ApoB and non-HDL-C show high correlation, although the degree of mutual concordance remains debated in CV risk evaluation. Objectives We used the Discriminant Ratio (DR methodology to compare the performance of non-HDL-C with that of apoB to rank diabetic patients according to dyslipidemia and to establish the underlying relationship between these variables taking measurement noise and intra-/intersubject variation into account, and to derive an unbiased equivalence equation. Methods Fasting total C, HDL-C, apoB and triglycerides were measured in 45 diabetic patients. The DR of the underlying between-subject standard deviation (SD to the within-subject SD was calculated from duplicates. Correlation coefficients between pairs were adjusted to include an estimate of the underlying correlation. Results Mean values [day 1 (1SD] were 143 (36 mg/dl (non-HDL-C and 98 (24 mg/dl (apoB. The DR's of both parameters were similar (1.76 and 1.83 (p = 0.83. Pearson's product-moment correlation coefficient between tests was very high (0.94, reaching unity (1.00 after attenuation adjustment. The unbiased equation of equivalence relating apoB to non-HDL-C had a slope of 0.65 and an intercept of 6.3 mg/dl. Conclusions The discrimination power of non-HDL-C is similar to that of apoB to rank diabetic patients according to atherogenic cholesterol and lipoprotein burden. Since true correlation between variables reached unity, non-HDL-C may provide not only a metabolic surrogate but also a candidate biometrical equivalent to apoB, as non-HDL-C calculation is readily available.

  20. Limited Role for Biliary Stent as Surrogate Fiducial Marker in Pancreatic Cancer: Stent and Intratumoral Fiducials Compared

    Energy Technology Data Exchange (ETDEWEB)

    Horst, Astrid van der, E-mail: a.vanderhorst@amc.uva.nl [Department of Radiation Oncology, Academic Medical Center, University of Amsterdam, Amsterdam (Netherlands); Lens, Eelco; Wognum, Silvia; Jong, Rianne de [Department of Radiation Oncology, Academic Medical Center, University of Amsterdam, Amsterdam (Netherlands); Hooft, Jeanin E. van [Department of Gastroenterology and Hepatology, Academic Medical Center, University of Amsterdam, Amsterdam (Netherlands); Tienhoven, Geertjan van; Bel, Arjan [Department of Radiation Oncology, Academic Medical Center, University of Amsterdam, Amsterdam (Netherlands)

    2014-07-01

    Purpose: Because of low soft-tissue contrast of cone beam computed tomography (CBCT), fiducial markers are often used for radiation therapy patient setup verification. For pancreatic cancer patients, biliary stents have been suggested as surrogate fiducials. Using intratumoral fiducials as standard for tumor position, this study aims to quantify the suitability of biliary stents for measuring interfractional and respiratory-induced position variations of pancreatic tumors. Methods and Materials: Eleven pancreatic cancer patients with intratumoral fiducials and a biliary stent were included in this study. Daily CBCT scans (243 in total) were registered with a reference CT scan, based on bony anatomy, on fiducial markers, and on the biliary stent, respectively. We analyzed the differences in tumor position (ie, markers center-of-mass position) among these 3 registrations. In addition, we measured for 9 patients the magnitude of respiratory-induced motion (MM) of the markers and of the stent on 4-dimensional CT (4DCT) and determined the difference between these 2 magnitudes (ΔMM). Results: The stent indicated tumor position better than bony anatomy in 67% of fractions; the absolute difference between the markers and stent registration was >5 mm in 46% of fractions and >10 mm in 20% of fractions. Large PTV margins (superior-inferior direction, >19 mm) would be needed to account for this interfractional position variability. On 4DCT, we found in superior-inferior direction a mean ΔMM of 0.5 mm (range, –2.6 to 4.2 mm). Conclusions: For respiratory-induced motion, the mean ΔMM is small, but for individual patients the absolute difference can be >4 mm. For interfractional position variations, a stent is, on average, a better surrogate fiducial than bony anatomy, but large PTV margins would still be required. Therefore, intratumoral fiducials are recommended for online setup verification for all pancreatic patients scheduled for radiation therapy, including

  1. Fuel Surrogate Physical Property Effects on Direct Injection Spray and Ignition Behavior

    Science.gov (United States)

    2015-09-01

    UNCLASSIFIED 1 Introduction Typical hydrocarbon fuels used in internal combustion engines , such as gasoline, diesel , or jet fuel, are composed of hundreds...optimization, which determines the surrogate composition that minimizes the deviation from the target properties. For modern diesel engines , which employ...of biodiesel and diesel fuel. Pei et al. [20] conducted a sensitivity analysis with a diesel engine simulation to assess the relative effects of

  2. SVAw - a web-based application tool for automated surrogate variable analysis of gene expression studies.

    Science.gov (United States)

    Pirooznia, Mehdi; Seifuddin, Fayaz; Goes, Fernando S; Leek, Jeffrey T; Zandi, Peter P

    2013-03-11

    Surrogate variable analysis (SVA) is a powerful method to identify, estimate, and utilize the components of gene expression heterogeneity due to unknown and/or unmeasured technical, genetic, environmental, or demographic factors. These sources of heterogeneity are common in gene expression studies, and failing to incorporate them into the analysis can obscure results. Using SVA increases the biological accuracy and reproducibility of gene expression studies by identifying these sources of heterogeneity and correctly accounting for them in the analysis. Here we have developed a web application called SVAw (Surrogate variable analysis Web app) that provides a user friendly interface for SVA analyses of genome-wide expression studies. The software has been developed based on open source bioconductor SVA package. In our software, we have extended the SVA program functionality in three aspects: (i) the SVAw performs a fully automated and user friendly analysis workflow; (ii) It calculates probe/gene Statistics for both pre and post SVA analysis and provides a table of results for the regression of gene expression on the primary variable of interest before and after correcting for surrogate variables; and (iii) it generates a comprehensive report file, including graphical comparison of the outcome for the user. SVAw is a web server freely accessible solution for the surrogate variant analysis of high-throughput datasets and facilitates removing all unwanted and unknown sources of variation. It is freely available for use at http://psychiatry.igm.jhmi.edu/sva. The executable packages for both web and standalone application and the instruction for installation can be downloaded from our web site.

  3. Sparse Polynomial Chaos Surrogate for ACME Land Model via Iterative Bayesian Compressive Sensing

    Science.gov (United States)

    Sargsyan, K.; Ricciuto, D. M.; Safta, C.; Debusschere, B.; Najm, H. N.; Thornton, P. E.

    2015-12-01

    For computationally expensive climate models, Monte-Carlo approaches of exploring the input parameter space are often prohibitive due to slow convergence with respect to ensemble size. To alleviate this, we build inexpensive surrogates using uncertainty quantification (UQ) methods employing Polynomial Chaos (PC) expansions that approximate the input-output relationships using as few model evaluations as possible. However, when many uncertain input parameters are present, such UQ studies suffer from the curse of dimensionality. In particular, for 50-100 input parameters non-adaptive PC representations have infeasible numbers of basis terms. To this end, we develop and employ Weighted Iterative Bayesian Compressive Sensing to learn the most important input parameter relationships for efficient, sparse PC surrogate construction with posterior uncertainty quantified due to insufficient data. Besides drastic dimensionality reduction, the uncertain surrogate can efficiently replace the model in computationally intensive studies such as forward uncertainty propagation and variance-based sensitivity analysis, as well as design optimization and parameter estimation using observational data. We applied the surrogate construction and variance-based uncertainty decomposition to Accelerated Climate Model for Energy (ACME) Land Model for several output QoIs at nearly 100 FLUXNET sites covering multiple plant functional types and climates, varying 65 input parameters over broad ranges of possible values. This work is supported by the U.S. Department of Energy, Office of Science, Biological and Environmental Research, Accelerated Climate Modeling for Energy (ACME) project. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

  4. An efficient surrogate-based simulation-optimization method for calibrating a regional MODFLOW model

    Science.gov (United States)

    Chen, Mingjie; Izady, Azizallah; Abdalla, Osman A.

    2017-01-01

    Simulation-optimization method entails a large number of model simulations, which is computationally intensive or even prohibitive if the model simulation is extremely time-consuming. Statistical models have been examined as a surrogate of the high-fidelity physical model during simulation-optimization process to tackle this problem. Among them, Multivariate Adaptive Regression Splines (MARS), a non-parametric adaptive regression method, is superior in overcoming problems of high-dimensions and discontinuities of the data. Furthermore, the stability and accuracy of MARS model can be improved by bootstrap aggregating methods, namely, bagging. In this paper, Bagging MARS (BMARS) method is integrated to a surrogate-based simulation-optimization framework to calibrate a three-dimensional MODFLOW model, which is developed to simulate the groundwater flow in an arid hardrock-alluvium region in northwestern Oman. The physical MODFLOW model is surrogated by the statistical model developed using BMARS algorithm. The surrogate model, which is fitted and validated using training dataset generated by the physical model, can approximate solutions rapidly. An efficient Sobol' method is employed to calculate global sensitivities of head outputs to input parameters, which are used to analyze their importance for the model outputs spatiotemporally. Only sensitive parameters are included in the calibration process to further improve the computational efficiency. Normalized root mean square error (NRMSE) between measured and simulated heads at observation wells is used as the objective function to be minimized during optimization. The reasonable history match between the simulated and observed heads demonstrated feasibility of this high-efficient calibration framework.

  5. The temporal and spatial characteristics of surrogate tropical cyclones from a multi-millenial simulation

    Energy Technology Data Exchange (ETDEWEB)

    Hunt, B.G.; Watterson, I.G. [CSIRO Marine and Atmospheric Research, PO Box 1, Aspendale (Australia)

    2010-04-15

    Output from a simulation with the CSIRO Mark 2 climatic model has been used to investigate the secular variability of tropical cyclone formation over the globe using Gray's Seasonal Genesis Parameter. This simulation differs from previous surrogate studies in using a coupled atmospheric-oceanic model, instead of specified sea surface temperatures, as well as being of multi-millenial duration, compared with decadal length simulations used elsewhere. Mean climatological values for each season for a 5,000-year period indicate that the model replicated the broad patterns of spatial and temporal variability. Results are presented in some detail for three regions, the southwest and northwest Pacific Oceans and the low latitude North Atlantic Ocean. A marked range of temporal variabilities of surrogate tropical cyclone numbers was obtained in the simulation, possibly indicating that the present, observed increase in these numbers may not be outside that attributable to natural variability. The component terms of the Seasonal Genesis Parameter permit the contribution of individual climatic terms to the generation of tropical cyclones to be identified. This approach highlighted the important role of relative vorticity and relative humidity, in addition to the governing influence of vertical wind shear. The remote influence of ENSO, versus that of local sea surface temperature anomalies, on surrogate tropical cyclone numbers was examined and revealed different outcomes depending on the region under consideration. The global total of surrogate tropical cyclone numbers exhibited noticeable interannual variability. The simulation reproduced most of the observed correlations between tropical cyclones and relevant climatic variables, but many of the correlations were not stable within the 5,000-year time series used. This suggests that observed correlations based on, typically, 100-years or less of data may not be representative of possible future outcomes. With minor

  6. The temporal and spatial characteristics of surrogate tropical cyclones from a multi-millenial simulation

    Science.gov (United States)

    Hunt, B. G.; Watterson, I. G.

    2010-04-01

    Output from a simulation with the CSIRO Mark 2 climatic model has been used to investigate the secular variability of tropical cyclone formation over the globe using Gray’s Seasonal Genesis Parameter. This simulation differs from previous surrogate studies in using a coupled atmospheric-oceanic model, instead of specified sea surface temperatures, as well as being of multi-millenial duration, compared with decadal length simulations used elsewhere. Mean climatological values for each season for a 5,000-year period indicate that the model replicated the broad patterns of spatial and temporal variability. Results are presented in some detail for three regions, the southwest and northwest Pacific Oceans and the low latitude North Atlantic Ocean. A marked range of temporal variabilities of surrogate tropical cyclone numbers was obtained in the simulation, possibly indicating that the present, observed increase in these numbers may not be outside that attributable to natural variability. The component terms of the Seasonal Genesis Parameter permit the contribution of individual climatic terms to the generation of tropical cyclones to be identified. This approach highlighted the important role of relative vorticity and relative humidity, in addition to the governing influence of vertical wind shear. The remote influence of ENSO, versus that of local sea surface temperature anomalies, on surrogate tropical cyclone numbers was examined and revealed different outcomes depending on the region under consideration. The global total of surrogate tropical cyclone numbers exhibited noticeable interannual variability. The simulation reproduced most of the observed correlations between tropical cyclones and relevant climatic variables, but many of the correlations were not stable within the 5,000-year time series used. This suggests that observed correlations based on, typically, 100-years or less of data may not be representative of possible future outcomes. With minor

  7. Improving Mixed Variable Optimization of Computational and Model Parameters Using Multiple Surrogate Functions

    Science.gov (United States)

    2008-03-01

    Mathematics and Theoretical Physics, Cambridge University, August 1992. 23. Booker, A. J., J. E. Dennis, Jr, P. D. Frank, D. B. Serafini , V. Torczon, and M...J., J. E. Dennis, Jr., P. D. Frank, D. W. Moore, and D. B. Serafini . Managing Surrogate Objectives to Optimize a Helicopter Rotor Design - Further...L. A., Jr., and H. Miura. “Approximation Concepts for Efficient Struc- tural Synthesis”. Technical Report CR-2552, NASA, 1976. 78. Serafini , D. B. A

  8. Neutron-induced capture cross sections of short-lived actinides with the surrogate reaction method

    Directory of Open Access Journals (Sweden)

    Gunsing F.

    2010-03-01

    Full Text Available Determination of neutron-capture cross sections of short-lived nuclei is opening the way to understand and clarify the properties of many nuclei of interest for nuclear structure physics, nuclear astrophysics and particularly for transmutation of nuclear wastes. The surrogate approach is well-recognized as a potentially very useful method to extract neutron cross sections for low-energy compound-nuclear reactions and to overcome the difficulties related to the target radioactivity. In this work we will assess where we stand on these neutron-capture cross section measurements and how we can achieve the short-lived Minor Actinides nuclei involved in the nuclear fuel cycle. The CENBG collaboration applied the surrogate method to determine the neutron-capture cross section of 233Pa (T1/2 = 27 d. The 233Pa (n,γ cross section is then deduced from the measured gamma decay probability of 234Pa compound nucleus formed via the surrogate 232Th(3He,p reaction channel. The obtained cross section data, covering the neutron energy range 0.1 to 1 MeV, have been compared with the predictions of the Hauser-Feshbach statistical model. The importance of establishing benchmarks is stressed for the minor actinides region. However, the lack of desired targets led us to propose recently the 174Yb (3He,pγ reaction as a surrogate reaction for the (n,γ predetermined benchmark cross section of 175Lu. An overview of the experimental setup combining gamma ray detectors such as Ge and C6D6 in coincidence with light charged particles ΔE-E Telescopes will be presented and preliminary results will be discussed.

  9. Preignition Chemistry of Xylenes and Their Effect on JP-8 Surrogates

    Science.gov (United States)

    2008-06-01

    The Effects of DTBP on the Oxidation of SI Primary Reference Fuels – A Study in an HCCI Engine and in a Pressurized Flow Reactor,” Ph.D. Thesis...blends with paraffins, and in JP-8 surrogates in a pressurized flow reactor, with complimentary experiments conducted in a single cylinder research engine ...Preignition Oxidation Chemistry of Xylene.” A tribute book for Professor Eliseo Ranzi, Italian Chemical Engineering Society, June 2008. 0.00Number of

  10. The Oxidation of a Gasoline Surrogate in the Negative Temperature Coefficient Region

    Science.gov (United States)

    2009-02-12

    used to model homo- geneous charge compression ignition ( HCCI ) engines with reason- able success [25]. The initial conditions for the surrogate mixture...Owens b a Department of Mechanical Engineering and Mechanics, Drexel University, 3141 Chestnut Street, Philadelphia, PA 19104-2875, USA b Department...critical for solving the problem of knock in spark igni- tion engines and for the development of Low Temperature Com- bustion engine technologies such as

  11. Generation of Comprehensive Surrogate Kinetic Models and Validation Databases for Simulating Large Molecular Weight Hydrocarbon Fuels

    Science.gov (United States)

    2012-10-25

    composed of highly isomerized paraffinic kerosene (denoted IPK). Comparisons of a 2nd generation surrogate formulated to match all four of the above...and di methyl alkanes was emulated using mixtures of n-dodecane and iso-octane that replicated its combustion property targets, demonstrating that... methyl heptane was shown to replicate the global combustion properties of the weakly branched isomer, further supporting that distinct functional

  12. Rail-to-rail differential input amplification stage with main and surrogate differential pairs

    Energy Technology Data Exchange (ETDEWEB)

    Britton, Jr., Charles Lanier; Smith, Stephen Fulton

    2007-03-06

    An operational amplifier input stage provides a symmetrical rail-to-rail input common-mode voltage without turning off either pair of complementary differential input transistors. Secondary, or surrogate, transistor pairs assume the function of the complementary differential transistors. The circuit also maintains essentially constant transconductance, constant slew rate, and constant signal-path supply current as it provides rail-to-rail operation.

  13. Bacillus thuringiensis as a surrogate for Bacillus anthracis in aerosol research.

    Science.gov (United States)

    Tufts, Jenia A M; Calfee, M Worth; Lee, Sang Don; Ryan, Shawn P

    2014-05-01

    Characterization of candidate surrogate spores prior to experimental use is critical to confirm that the surrogate characteristics are as closely similar as possible to those of the pathogenic agent of interest. This review compares the physical properties inherent to spores of Bacillus anthracis (Ba) and Bacillus thuringiensis (Bt) that impact their movement in air and interaction with surfaces, including size, shape, density, surface morphology, structure and hydrophobicity. Also evaluated is the impact of irradiation on the physical properties of both Bacillus species. Many physical features of Bt and Ba have been found to be similar and, while Bt is considered typically non-pathogenic, it is in the B. cereus group, as is Ba. When cultured and sporulated under similar conditions, both microorganisms share a similar cylindrical pellet shape, an aerodynamic diameter of approximately 1 μm (in the respirable size range), have an exosporium with a hairy nap, and have higher relative hydrophobicities than other Bacillus species. While spore size, morphology, and other physical properties can vary among strains of the same species, the variations can be due to growth/sporulation conditions and may, therefore, be controlled. Growth and sporulation conditions are likely among the most important factors that influence the representativeness of one species, or preparation, to another. All Bt spores may, therefore, not be representative of all Ba spores. Irradiated spores do not appear to be a good surrogate to predict the behavior of non-irradiated spores due to structural damage caused by the irradiation. While the use of Bt as a surrogate for Ba in aerosol testing appears to be well supported, this review does not attempt to narrow selection between Bt strains. Comparative studies should be performed to test the hypothesis that viable Ba and Bt spores will behave similarly when suspended in the air (as an aerosol) and to compare the known microscale characteristics

  14. An Efficient Variable Screening Method for Effective Surrogate Models for Reliability-Based Design Optimization

    Science.gov (United States)

    2014-04-01

    reliability-based design optimization ( RBDO ) process, surrogate models are frequently used to reduce the number of simulations because analysis of a...the RBDO problem and thus mitigate the curse of dimensionality. Therefore, it is desirable to develop an efficient and effective variable...screening method for reduction of the dimension of the RBDO problem. In this paper, requirements of the variable screening method for deterministic design

  15. Effectiveness of sanitizing products on controlling selected pathogen surrogates on retail deli slicers.

    Science.gov (United States)

    Yeater, Michael C; Kirsch, Katie R; Taylor, T Matthew; Mitchell, Jeff; Osburn, Wesley N

    2015-04-01

    The objectives of this study were (i) to assess the efficacy of quaternary ammonium chloride-based wet foam (WF) and dry foam (DF) sanitizer systems (600 ppm) for reducing Listeria innocua (a nonpathogenic surrogate of Listeria monocytogenes) or a 100.0 μg/ml rifampin-resistant Salmonella Typhimurium LT2 (a nonpathogenic surrogate of Salmonella enterica serovar Typhimurium) on niche and transfer point areas of an unwashed retail deli slicer as compared with traditional chlorine (Cl(-)) treatment (200 ppm) and (ii) to compare sanitizer surface contact times (10 and 15 min) for pathogen surrogate control. Turkey frankfurter slurries inoculated with L. innocua or Salmonella Typhimurium were used to inoculate seven high-risk sites on a commercial slicer. After 30 min of bacterial attachment, slicers were dry wiped to remove excess food matter, followed by a randomly assigned sanitizer treatment. Surviving pathogen surrogate cells were enumerated on modified Oxford's agar not containing antimicrobic supplement (L. innocua) or on tryptic soy agar supplemented with 100 μg/ml rifampin (Salmonella Typhimurium LT2). Replicate-specific L. innocua and Salmonella Typhimurium reductions were calculated as log CFU per square centimeter of control minus log CFU per square centimeter of enumerated survivors for each site. For both organisms, all sanitizer treatments differed from each other, with Cl(-) producing the least reduction and WF the greatest reduction. A significant (P < 0.05) site-by-treatment interaction was observed. The results of the study indicate that quaternary ammonium chloride sanitizers (600 ppm) applied by both WF and DF were more effective at reducing L. innocua and Salmonella Typhimurium than a traditional Cl sanitizer (200 ppm) on unwashed slicer surfaces.

  16. Parameter identification and calibration of the Xin'anjiang model using the surrogate modeling approach

    Science.gov (United States)

    Ye, Yan; Song, Xiaomeng; Zhang, Jianyun; Kong, Fanzhe; Ma, Guangwen

    2014-06-01

    Practical experience has demonstrated that single objective functions, no matter how carefully chosen, prove to be inadequate in providing proper measurements for all of the characteristics of the observed data. One strategy to circumvent this problem is to define multiple fitting criteria that measure different aspects of system behavior, and to use multi-criteria optimization to identify non-dominated optimal solutions. Unfortunately, these analyses require running original simulation models thousands of times. As such, they demand prohibitively large computational budgets. As a result, surrogate models have been used in combination with a variety of multi-objective optimization algorithms to approximate the true Pareto-front within limited evaluations for the original model. In this study, multi-objective optimization based on surrogate modeling (multivariate adaptive regression splines, MARS) for a conceptual rainfall-runoff model (Xin'anjiang model, XAJ) was proposed. Taking the Yanduhe basin of Three Gorges in the upper stream of the Yangtze River in China as a case study, three evaluation criteria were selected to quantify the goodness-of-fit of observations against calculated values from the simulation model. The three criteria chosen were the Nash-Sutcliffe efficiency coefficient, the relative error of peak flow, and runoff volume (REPF and RERV). The efficacy of this method is demonstrated on the calibration of the XAJ model. Compared to the single objective optimization results, it was indicated that the multi-objective optimization method can infer the most probable parameter set. The results also demonstrate that the use of surrogate-modeling enables optimization that is much more efficient; and the total computational cost is reduced by about 92.5%, compared to optimization without using surrogate modeling. The results obtained with the proposed method support the feasibility of applying parameter optimization to computationally intensive simulation

  17. Syrphid community in organic olive groves: can morphospecies be used as surrogates for species?

    OpenAIRE

    2012-01-01

    Syrphids are known as biological control agents of hemipteran pests and, in the olive grove, several species have been identified as predators of Euphyllura olivina (Costa). The objectives of this work were: (1) to study the syrphid community in organic olive groves and (2) to test the potential for the use of syrphid morphospecies as a surrogate for species. The field work was conducted in two organic olive groves located near Mirandela (Northeast of Portugal). The sampling perio...

  18. Real-time surrogate analysis for potential oil and gas contamination of drinking water resources

    Science.gov (United States)

    Son, Ji-Hee; Carlson, Kenneth H.

    2015-09-01

    Public concerns related to the fast-growing shale oil and gas industry have increased during recent years. The major concern regarding shale gas production is the potential of fracturing fluids being injected into the well or produced fluids flowing out of the well to contaminate drinking water resources such as surface water and groundwater. Fracturing fluids contain high total dissolved solids (TDS); thus, changes in TDS concentrations in groundwater might indicate influences of fracturing fluids. An increase of methane concentrations in groundwater could also potentially be due to hydraulic fracturing activities. To understand the possible contamination of groundwater by fracturing activities, real-time groundwater monitoring is being implemented in the Denver-Julesburg basin of northeast Colorado. A strategy of monitoring of surrogate parameters was chosen instead of measuring potential contaminants directly, an approach that is not cost effective or operationally practical. Contaminant surrogates of TDS and dissolved methane were proposed in this study, and were tested for correlation and data distribution with laboratory experiments. Correlations between TDS and electrical conductivity (EC), and between methane contamination and oxidation-reduction potential (ORP) were strong at low concentrations of contaminants (1 mg/L TDS and 0.3 mg/L CH4). Dissolved oxygen (DO) was only an effective surrogate at higher methane concentrations (≥2.5 mg/L). The results indicated that EC and ORP are effective surrogates for detecting concentration changes of TDS and methane, respectively, and that a strategy of monitoring for easy to measure parameters can be effective detecting real-time, anomalous behavior relative to a predetermined baseline.

  19. Molecular Beam Studies of Volatile Liquids and Fuel Surrogates Using Liquid Microjets

    Science.gov (United States)

    2014-12-18

    Molecular Beam Studies of Volatile Liquids and Fuel Surrogates Using Liquid Microjets Gilbert Nathanson, Department of Chemistry University of...alter the dynamics of evaporation from the commercial jet fuel Jet A. These results are outlined below. Exploring Fuels in Vacuum using Liquid ...hydrocarbon liquids inside a vacuum chamber. These jets, narrower than a human hair, are typically 10 – 40 µm in diameter. Their small surface area and

  20. Hospitalization for early bonding of the genetic mother after a surrogate pregnancy: report of two cases.

    Science.gov (United States)

    Sharan, H; Yahav, J; Peleg, D; Ben-Rafael, Z; Merlob, P

    2001-12-01

    In surrogate pregnancies the genetic parents have little opportunity for early bonding to their infant, either prenatally (in utero) or in the immediate postnatal period. The purpose of this article is to describe a new method for encouraging early parent-infant bonding after surrogate pregnancy by hospitalizing the genetic mother in the maternity ward immediately after the delivery. Two genetic mothers were hospitalized in the maternity ward (rooming-in system) at the Rabin Medical Center in Israel immediately after delivery of their infants by surrogate arrangement. The first birth was a singleton pregnancy with vaginal delivery and the second, a twin pregnancy with delivery by cesarean section. The genetic parents were counseled by a social worker from the adoption agency, starting 3 months before the estimated date of delivery. The parents were referred to the hospital social worker before the delivery. To assess attachment, we observed the parents' behavior toward their children during two daily 15-minute periods of free, unstructured interaction. The parents showed good primary caregiving functions and established affective verbal and physical contact with the infants. They began to recognize the infants' needs and temperament, and exhibited an aura of self-confidence during their interactions. All expressed satisfaction with the method at discharge and reported on reduction of their fears about returning home with the infants. We believe that early hospitalization of the genetic mother in a surrogate delivery may be desirable to establish good and safe early mother-infant bonding, and that it should be considered for adoption as regular hospital policy. Further randomized studies with larger samples over the long term are warranted.

  1. Domino Synthesis of Thiochromenes through Cu-Catalyzed Incorporation of Sulfur Using Xanthate Surrogate.

    Science.gov (United States)

    Muthupandi, Pandi; Sundaravelu, Nallappan; Sekar, Govindasamy

    2017-02-17

    An efficient domino reaction has been developed for the synthesis of thiochromenes through Cu-catalyzed in situ incorporation of sulfur. This domino method avoids the use of less accessible and unpleasant arenethiols as starting materials, instead utilizes very stable aryl halides along with potassium ethyl xanthate as an odorless sulfur surrogate. The domino methodology proceeds through C(aryl)-S coupling, thioester cleavage, sulfa-Michael addition, aldol reaction, and elimination reaction sequences to provide thiochromenes in good yields.

  2. A computer-based education intervention to enhance surrogates' informed consent for genomics research.

    Science.gov (United States)

    Shelton, Ann K; Freeman, Bradley D; Fish, Anne F; Bachman, Jean A; Richardson, Lloyd I

    2015-03-01

    Many research studies conducted today in critical care have a genomics component. Patients' surrogates asked to authorize participation in genomics research for a loved one in the intensive care unit may not be prepared to make informed decisions about a patient's participation in the research. To examine the effectiveness of a new, computer-based education module on surrogates' understanding of the process of informed consent for genomics research. A pilot study was conducted with visitors in the waiting rooms of 2 intensive care units in a Midwestern tertiary care medical center. Visitors were randomly assigned to the experimental (education module plus a sample genomics consent form; n = 65) or the control (sample genomics consent form only; n = 69) group. Participants later completed a test on informed genomics consent. Understanding the process of informed consent was greater (P = .001) in the experimental group than in the control group. Specifically, compared with the control group, the experimental group had a greater understanding of 8 of 13 elements of informed consent: intended benefits of research (P = .02), definition of surrogate consenter (P= .001), withdrawal from the study (P = .001), explanation of risk (P = .002), purpose of the institutional review board (P = .001), definition of substituted judgment (P = .03), compensation for harm (P = .001), and alternative treatments (P = .004). Computer-based education modules may be an important addition to conventional approaches for obtaining informed consent in the intensive care unit. Preparing patients' family members who may consider serving as surrogate consenters is critical to facilitating genomics research in critical care. ©2015 American Association of Critical-Care Nurses.

  3. Rail-to-rail differential input amplification stage with main and surrogate differential pairs

    Science.gov (United States)

    Britton, Jr., Charles Lanier; Smith, Stephen Fulton

    2007-03-06

    An operational amplifier input stage provides a symmetrical rail-to-rail input common-mode voltage without turning off either pair of complementary differential input transistors. Secondary, or surrogate, transistor pairs assume the function of the complementary differential transistors. The circuit also maintains essentially constant transconductance, constant slew rate, and constant signal-path supply current as it provides rail-to-rail operation.

  4. Dynamic impact indentation of hydrated biological tissues and tissue surrogate gels

    Science.gov (United States)

    Ilke Kalcioglu, Z.; Qu, Meng; Strawhecker, Kenneth E.; Shazly, Tarek; Edelman, Elazer; VanLandingham, Mark R.; Smith, James F.; Van Vliet, Krystyn J.

    2011-03-01

    For both materials engineering research and applied biomedicine, a growing need exists to quantify mechanical behaviour of tissues under defined hydration and loading conditions. In particular, characterisation under dynamic contact-loading conditions can enable quantitative predictions of deformation due to high rate 'impact' events typical of industrial accidents and ballistic insults. The impact indentation responses were examined of both hydrated tissues and candidate tissue surrogate materials. The goals of this work were to determine the mechanical response of fully hydrated soft tissues under defined dynamic loading conditions, and to identify design principles by which synthetic, air-stable polymers could mimic those responses. Soft tissues from two organs (liver and heart), a commercially available tissue surrogate gel (Perma-Gel™) and three styrenic block copolymer gels were investigated. Impact indentation enabled quantification of resistance to penetration and energy dissipative constants under the rates and energy densities of interest for tissue surrogate applications. These analyses indicated that the energy dissipation capacity under dynamic impact increased with increasing diblock concentration in the styrenic gels. Under the impact rates employed (2 mm/s to 20 mm/s, corresponding to approximate strain energy densities from 0.4 kJ/m3 to 20 kJ/m3), the energy dissipation capacities of fully hydrated soft tissues were ultimately well matched by a 50/50 triblock/diblock composition that is stable in ambient environments. More generally, the methodologies detailed here facilitate further optimisation of impact energy dissipation capacity of polymer-based tissue surrogate materials, either in air or in fluids.

  5. A causal framework for surrogate endpoints with semi-competing risks data.

    Science.gov (United States)

    Ghosh, Debashis

    2012-10-01

    In this note, we address the problem of surrogacy using a causal modelling framework that differs substantially from the potential outcomes model that pervades the biostatistical literature. The framework comes from econometrics and conceptualizes direct effects of the surrogate endpoint on the true endpoint. While this framework can incorporate the so-called semi-competing risks data structure, we also derive a fundamental non-identifiability result. Relationships to existing causal modelling frameworks are also discussed.

  6. Recovery from vestibular ototoxicity

    Science.gov (United States)

    Black, F. O.; Gianna-Poulin, C.; Pesznecker, S. C.

    2001-01-01

    OBJECTIVE: Determine whether subjects with documented vestibular ototoxicity recover vestibular function and, if so, investigate the recovery dynamics. STUDY DESIGN: Prospective and retrospective reviews and repeated measures. SETTING: Clinical research and technology center. SUBJECTS: Twenty-eight subjects who received vestibulotoxic medications were followed for at least 12 months after initial treatment. CONTROLS: Our subject sample was compared with a published database of normal individuals. INTERVENTIONS: All 28 subjects received systemically administered medications known to be ototoxic. The subjects' treating physicians controlled medication, dosage, and administration schedules. MAIN OUTCOME MEASURES: Tests of horizontal canal vestibulo-ocular function were performed. Subjects' auditory and vestibular symptoms were recorded. RESULTS: Eleven subjects (39%) showed changes in horizontal canal vestibulo-ocular gain constant (GC) and/or time constant (TC) consistent with vestibular ototoxicity. When tested 1 year after ototoxic drug administration, eight of the nine subjects who experienced ototoxic decrease in GC showed a recovery of GC to normal limits. Only one of the eight subjects who experienced ototoxic decrease in TC showed recovery of TC to within normal limits. Ototoxicity onset and recovery were independent of baseline vestibular function, and ototoxicity onset did not correlate with cumulative dose of ototoxic medication. There was no relationship between subjective symptoms and ototoxicity onset. CONCLUSIONS: Recovery of GC after vestibular ototoxicity is more commonly observed than recovery of TC. Because ototoxic changes developed and continued in an unpredictable time and manner in relation to ototoxic drug administration, we propose that once ototoxic changes in vestibulo-ocular reflex are detected, ototoxic medications should be discontinued as soon as possible.

  7. Ventilation with heat recovery

    DEFF Research Database (Denmark)

    Tommerup, Henrik M.; Svendsen, Svend

    2005-01-01

    This paper presents the experiences from the use of ventilation with heat recovery in several experimental single-family houses developed and built within the last four years to meet the new Danish energy requirements of 2005. Included are descriptions of the ventilation system components...... and the main functional demands as well as measurements of the thermal efficiency, electricity consumptions and building air tightness. The paper addresses the aspects of minimizing the heat loss from the duct system and the heat recovery unit (when placed in an unheated attic space) in order to obtain...

  8. Orimulsion containment and recovery

    Energy Technology Data Exchange (ETDEWEB)

    Sommerville, M. [Briggs Marine Environmental Services, Aberdeen (United Kingdom)

    1999-01-01

    This paper focuses on the need for examination of Orimulsion fuel and its spill behaviour in the light of the anticipated increase in consumption of this fuel which comprises bitumen dispersed in water with addition of a small amount of surfactant. The behaviour and fate of Orimulsion at sea, and observations from experimental and sea trials are examined. The identification of spill control techniques, spill detection, the predictive modeling of the spill and response, sub-surface plume measurement, and containment and deflection are considered. Recovery of the bitumen produced from an Orimulsion spill, combined containment and recovery, dispersed Orimulsion, and beach cleaning are addressed. The properties of Orimulsion are tabulated. (UK)

  9. Recovery in aluminium

    DEFF Research Database (Denmark)

    Gundlach, Carsten

    2006-01-01

    In the present thesis the development of a unique experimental method for volume characterisation of individual embedded crystallites down to a radius of 150 nm is presented. This method is applied to in-situ studies of recovery in aluminium. The method is an extension of 3DXRD microscopy, an X...... are represented as strings. To identify the strings a combination of a 5D connected component type algorithm and multi-peak fitting was found to be superior. The first use of the method was a study of recovery of a deformed aluminium alloy (AA1050). The aluminium alloy was deformed by cold rolling to a thickness...

  10. Ventilation with heat recovery

    DEFF Research Database (Denmark)

    Tommerup, Henrik M.; Svendsen, Svend

    2005-01-01

    and the main functional demands as well as measurements of the thermal efficiency, electricity consumptions and building air tightness. The paper addresses the aspects of minimizing the heat loss from the duct system and the heat recovery unit (when placed in an unheated attic space) in order to obtain......This paper presents the experiences from the use of ventilation with heat recovery in several experimental single-family houses developed and built within the last four years to meet the new Danish energy requirements of 2005. Included are descriptions of the ventilation system components...

  11. Epigenetics in Stroke Recovery

    Science.gov (United States)

    Kassis, Haifa; Shehadah, Amjad; Chopp, Michael; Zhang, Zheng Gang

    2017-01-01

    Abstract: While the death rate from stroke has continually decreased due to interventions in the hyperacute stage of the disease, long-term disability and institutionalization have become common sequelae in the aftermath of stroke. Therefore, identification of new molecular pathways that could be targeted to improve neurological recovery among survivors of stroke is crucial. Epigenetic mechanisms such as post-translational modifications of histone proteins and microRNAs have recently emerged as key regulators of the enhanced plasticity observed during repair processes after stroke. In this review, we highlight the recent advancements in the evolving field of epigenetics in stroke recovery. PMID:28264471

  12. Sheepshead minnows (Cyprinodon variegatus) as a surrogate species in assessing contaminant risk to two endangered cyprinodontids

    Energy Technology Data Exchange (ETDEWEB)

    Brecken-Folse, J.; Albrecht, B. [TRAC Labs., Gulf Breeze, FL (United States); Mayer, F. [Environmental Protection Agency, Gulf Breeze, FL (United States); Ellersieck, M. [Univ. of Missouri, Columbia, MO (United States); Sappington, L. [National Biological Service, Columbia, MO (United States)

    1995-12-31

    Sheepshead minnows (Cyprinodon variegatus) were tested as a surrogate species to assess contaminant risk for the endangered Leon Springs pupfish (C. bovinus) and desert pupfish (C. macularius). Acute toxicity tests were conducted with carbaryl, copper sulfate, 4-nonylphenol, pentachlorophenol, and permethrin in accordance with ASTM guidelines. Sheepshead minnows were always more sensitive than pupfish, but the differences were small. 96-h LC50s for sheepshead minnows and Leon Springs pupfish were, respectively: carbaryl (4.2 and 4.6 mg/L), copper sulfate (2.5 and 4.6 mg/L), 4-nonylphenol (0.46 and 0.48 mg/L), pentachlorophenol (0.05 and 0.08 mg/L), permethrin (1 7 and 21 ug/L). Only one test could be conducted with desert pupfish and carbaryl, with the sheepshead minnow being more sensitive (7.3 vs 4.2 mg/L). These data, along with other data from the US NBS, Columbia, MO (two surrogate and six endangered freshwater fishes), indicate that toxicity test data for surrogate fishes can be used reliably to predict chemical toxicity to endangered fishes by interspecies correlations. However, the correlations were generally best within a family, particularly with the Cyprinodontids.

  13. Cellular therapies based on stem cells and their insulin-producing surrogates: a 2015 reality check.

    Science.gov (United States)

    Giannoukakis, Nick; Trucco, Massimo

    2015-05-01

    Stem cell technology has recently gained a substantial amount of interest as one method to create a potentially limitless supply of transplantable insulin-producing cells to treat, and possibly cure diabetes mellitus. In this review, we summarize the state-of-the art of stem cell technology and list the potential sources of stem cells that have been shown to be useful as insulin-expressing surrogates. We also discuss the milestones that have been reached and those that remain to be addressed to generate bona fide beta cell-similar, insulin-producing surrogates. The caveats, limitations, and realistic expectations are also considered for current and future technology. In spite of the tremendous technical advances realized in the past decade, especially in the field of reprogramming adult somatic cells to become stem cells, the state-of-the art still relies on lengthy and cumbersome in vitro culture methods that yield cell populations that are not particularly glucose-responsive when transplanted into diabetic hosts. Despite the current impediments toward clinical translation, including the potential for immune rejection, the availability of technology to generate patient-specific reprogrammable stem cells has, and will be critical for, important insights into the genetics, epigenetics, biology, and physiology of insulin-producing cells in normal and pathologic states. This knowledge could accelerate the time to reach the desired breakthrough for safe and efficacious beta cell surrogates.

  14. Concentration and retention of Toxoplasma gondii surrogates from seawater by red abalone (Haliotis rufescens)

    Science.gov (United States)

    Schott, Kristen C; Krusor, Colin; Tinker, M. Tim; Moore, James G.; Conrad, Patricia A.; Shapiro, Karen

    2016-01-01

    Small marine snails and abalone have been identified as high- and low-risk prey items, respectively, for exposure of threatened southern sea otters to Toxoplasma gondii, a zoonotic parasite that can cause fatal encephalitis in animals and humans. While recent work has characterized snails as paratenic hosts for T. gondii, the ability of abalone to vector the parasite has not been evaluated. To further elucidate why abalone predation may be protective against T. gondii exposure, this study aimed to determine whether: (1) abalone are physiologically capable of acquiring T. gondii; and (2) abalone and snails differ in their ability to concentrate and retain the parasite. Abalone were exposed to T. gondii surrogate microspheres for 24 h, and fecal samples were examined for 2 weeks following exposure. Concentration of surrogates was 2–3 orders of magnitude greater in abalone feces than in the spiked seawater, and excretion of surrogates continued for 14 days post-exposure. These results indicate that, physiologically, abalone and snails can equally vector T. gondii as paratenic hosts. Reduced risk of T. gondii infection in abalone-specializing otters may therefore result from abalone's high nutritional value, which implies otters must consume fewer animals to meet their caloric needs.

  15. Surrogate models for identifying robust, high yield regions of parameter space for ICF implosion simulations

    Science.gov (United States)

    Humbird, Kelli; Peterson, J. Luc; Brandon, Scott; Field, John; Nora, Ryan; Spears, Brian

    2016-10-01

    Next-generation supercomputer architecture and in-transit data analysis have been used to create a large collection of 2-D ICF capsule implosion simulations. The database includes metrics for approximately 60,000 implosions, with x-ray images and detailed physics parameters available for over 20,000 simulations. To map and explore this large database, surrogate models for numerous quantities of interest are built using supervised machine learning algorithms. Response surfaces constructed using the predictive capabilities of the surrogates allow for continuous exploration of parameter space without requiring additional simulations. High performing regions of the input space are identified to guide the design of future experiments. In particular, a model for the yield built using a random forest regression algorithm has a cross validation score of 94.3% and is consistently conservative for high yield predictions. The model is used to search for robust volumes of parameter space where high yields are expected, even given variations in other input parameters. Surrogates for additional quantities of interest relevant to ignition are used to further characterize the high yield regions. This work performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344, Lawrence Livermore National Security, LLC. LLNL-ABS-697277.

  16. Stability of and attachment to lettuce by a culturable porcine sapovirus surrogate for human caliciviruses.

    Science.gov (United States)

    Wang, Qiuhong; Zhang, Zhenwen; Saif, Linda J

    2012-06-01

    Human noroviruses (HuNoVs) are the leading cause of food-borne illness, accounting for 58% of U.S. cases. Because HuNoVs are unculturable, surrogates are needed to investigate transmission routes and evaluate disinfection methods. However, the current surrogates, feline calicivirus (FCV) and murine NoV (MNV), are less tolerant than HuNoVs to acid and chlorine, respectively. Porcine sapovirus (SaV) is the only culturable enteropathogenic calicivirus. In this study, the resistance of SaV to physicochemical treatments was compared to that of HuNoVs (by reverse transcription-PCR), FCV, and MNV (by infectivity assays). Sapovirus and HuNoV (viral RNA) showed similar resistances to heat (56°C) and to different concentrations of chlorine. However, SaV was more resistant than HuNoVs to ethanol treatment (60% and 70%). Like HuNoVs, SaV was stable at pH 3.0 to 8.0, with a Sapovirus attached to lettuce leaves significantly at its capsid isoelectric point (pH 5.0), and the attached viral particles remained infectious on lettuce after 1 week of storage at 4°C. The culturable SaV is a good surrogate for studying HuNoV contamination and transmission in leafy greens and potential disinfectants.

  17. Laminar Flame Speeds of Gasoline Surrogates Measured with the Flat Flame Method

    KAUST Repository

    Liao, Y.-H.

    2016-01-27

    © 2016 American Chemical Society. The adiabatic, laminar flame speeds of gasoline surrogates at atmospheric pressure over a range of equivalence ratios of = 0.8-1.3 and unburned gas temperatures of 298-400 K are measured with the flat flame method, which produces a one-dimensional flat flame free of stretch. Surrogates used in the current work are the primary reference fuels (PRFs, mixtures of n-heptane and isooctane), the toluene reference fuels (TRFs, mixtures of toluene and PRFs), and the ethanol reference fuels (ERFs, mixtures of ethanol and PRFs). In general, there is good agreement between the present work and the literature data for single-component fuel and PRF mixtures. Surrogates of TRF mixtures are found to exhibit comparable flame speeds to a real gasoline, while there is discrepancy observed between isooctane and gasoline. Moreover, the laminar flame speeds of TRF mixtures with similar fractions of n-heptane are found to be insensitive to the quantity of toluene in the mixture. Mixtures of ERFs exhibit comparable flame speeds to those of TRFs with similar mole fractions of n-heptane and isooctane.

  18. Streamflow dynamics at the Puget Sound, Washington: application of a surrogate data method

    Directory of Open Access Journals (Sweden)

    N. She

    2005-01-01

    Full Text Available Recent progress in nonlinear dynamic theory has inspired hydrologists to apply innovative nonlinear time series techniques to the analysis of streamflow data. However, regardless of the method employed to analyze streamflow data, the first step should be the identification of underlying dynamics using one or more methods that could distinguish between linear and nonlinear, deterministic and stochastic processes from data itself. In recent years a statistically rigorous framework to test whether or not the examined time series is generated by a Gaussian (linear process undergoing a possibly nonlinear static transform is provided by the method of surrogate data. The surrogate data, generated to represent the null hypothesis, are compared to the original data under a nonlinear discriminating statistic in order to reject or approve the null hypothesis. In recognition of this tendency, the method of 'surrogate data' is applied herein to determine the underlying linear stochastic or nonlinear deterministic nature of daily streamflow data observed from the central basin of Puget Sound, and as applicable, distinguish between the static or dynamic nonlinearity of the data in question.

  19. UQ -- Fast Surrogates Key to New Methodologies in an Operational and Research Volcanic Hazard Forecasting System

    Science.gov (United States)

    Hughes, C. G.; Stefanescu, R. E. R.; Patra, A. K.; Bursik, M. I.; Madankan, R.; Pouget, S.; Jones, M.; Singla, P.; Singh, T.; Pitman, E. B.; Morton, D.; Webley, P.

    2014-12-01

    As the decision to construct a hazard map is frequently precipitated by the sudden initiation of activity at a volcano that was previously considered dormant, timely completion of the map is imperative. This prohibits the calculation of probabilities through direct sampling of a numerical ash-transport and dispersion model. In developing a probabilistic forecast for ash cloud locations following an explosive volcanic eruption, we construct a number of possible meta-models (a model of the simulator) to act as fast surrogates for the time-expensive model. We will illustrate the new fast surrogates based on both polynomial chaos and multilevel sparse representations that have allowed us to conduct the Uncertainty Quantification (UQ) in a timely fashion. These surrogates allow orders of magnitude improvement in cost associated with UQ, and are likely to have a major impact in many related domains.This work will be part of an operational and research volcanic forecasting system (see the Webley et al companion presentation) moving towards using ensembles of eruption source parameters and Numerical Weather Predictions (NWPs), rather than single deterministic forecasts, to drive the ash cloud forecasting systems. This involves using an Ensemble Prediction System (EPS) as input to an ash transport and dispersion model, such as PUFF, to produce ash cloud predictions, which will be supported by a Decision Support System. Simulation ensembles with different input volcanic source parameters are intelligently chosen to predict the average and higher-order moments of the output correctly.

  20. Deducing the 237U(n,f) cross-section using the Surrogate Ratio Method

    Energy Technology Data Exchange (ETDEWEB)

    Burke, J T; Bernstein, L A; Escher, J; Ahle, L; Church, J A; Dietrich, F S; Moody, K J; Norman, E B; Phair, L; Fallon, P; Clark, R M; Deleplanque, M A; Descovich, M; Cromaz, M; Lee, I Y; Macchiavelli, A O; McMahan, M A; Moretto, L G; Rodriguez-Vieitez, E; Stephens, F S; Ai, H; Beausang, C; Cridder, B

    2005-12-29

    The authors have deduced the cross section for {sup 237}U(n,f) over an equivalent neutron energy range from 0 to 20 MeV using the Surrogate Ratio method. A 55 MeV {sup 4}He beam from the 88 Inch Cyclotron at Lawrence Berkeley National Laboratory was used to induce fission in the following reactions: {sup 238}U({alpha},{alpha}{prime}f) and {sup 236}U({alpha},{alpha}{prime}f). The {sup 238}U reaction was a surrogate for {sup 237}U(n,f) and the {sup 236}U reaction was used as a surrogate for {sup 235}U(n,f). Scattered alpha particles were detected in a fully depleted segmented silicon telescope array (STARS) over an angle range of 35{sup o} to 60{sup o} with respect to the beam axis. The fission fragments were detected in a third independent silicon detector located at backward angles between 106{sup o} and 131{sup o}.

  1. Development of surrogate correlation models to predict trace organic contaminant oxidation and microbial inactivation during ozonation.

    Science.gov (United States)

    Gerrity, Daniel; Gamage, Sujanie; Jones, Darryl; Korshin, Gregory V; Lee, Yunho; Pisarenko, Aleksey; Trenholm, Rebecca A; von Gunten, Urs; Wert, Eric C; Snyder, Shane A

    2012-12-01

    The performance of ozonation in wastewater depends on water quality and the ability to form hydroxyl radicals (·OH) to meet disinfection or contaminant transformation objectives. Since there are no on-line methods to assess ozone and ·OH exposure in wastewater, many agencies are now embracing indicator frameworks and surrogate monitoring for regulatory compliance. Two of the most promising surrogate parameters for ozone-based treatment of secondary and tertiary wastewater effluents are differential UV(254) absorbance (ΔUV(254)) and total fluorescence (ΔTF). In the current study, empirical correlations for ΔUV(254) and ΔTF were developed for the oxidation of 18 trace organic contaminants (TOrCs), including 1,4-dioxane, atenolol, atrazine, bisphenol A, carbamazepine, diclofenac, gemfibrozil, ibuprofen, meprobamate, naproxen, N,N-diethyl-meta-toluamide (DEET), para-chlorobenzoic acid (pCBA), phenytoin, primidone, sulfamethoxazole, triclosan, trimethoprim, and tris-(2-chloroethyl)-phosphate (TCEP) (R(2) = 0.50-0.83) and the inactivation of three microbial surrogates, including Escherichia coli, MS2, and Bacillus subtilis spores (R(2) = 0.46-0.78). Nine wastewaters were tested in laboratory systems, and eight wastewaters were evaluated at pilot- and full-scale. A predictive model for OH exposure based on ΔUV(254) or ΔTF was also proposed.

  2. Validation of (n,gamma) surrogate methods and the 95Mo(n,gamma) reaction

    Science.gov (United States)

    Cizewski, J. A.; Adekola, A. S.; Howard, M. E.; Manning, B.; Ratkiewicz, A.; Couture, A. J.; Devlin, M.; Fotiades, N.; Nelson, R. O.; O'Donnell, J. M.; Peters, W. A.; Burke, J. T.; Escher, J. E.; Hatarik, R.; Scielzo, N. D.

    2012-10-01

    Neutron capture on unstable isotopes is important for the synthesis of heavy elements through both the r and s processes and so for nuclear energy and stockpile stewardship science. However, it is difficult to measure these cross sections directly with neutrons on targets that live less than about 100 days. Therefore, there has been a concerted effort by many groups [J.E. Escher RMP 84, 353 (2012) and references therein] to develop a validated surrogate reaction for neutron capture, a reaction that predominantly occurs at relatively low neutron energies where the angular momentum dependence needs to be taken into account. Many of the surrogate approaches use partial cross sections of discrete low-lying gamma-ray transitions to deduce the decay of the compound nucleus. Yet there have been very few measurements of the intensity of these discrete transitions in (n,g) as a function of neutron energy up to 200 keV. As part of the program to validate (d,pg) as a surrogate for neutron capture, we have recently measured the intensity of yrast transitions in 96Mo populated by the 95Mo(n,g) reaction with a small array of HPGe detectors on FP12 at the Lujan Center of LANSCE. Preliminary results of these measurements and the status of the (d,pg) validation program with 95Mo targets will be presented.

  3. Surrogate-based modeling and dimension reduction techniques for multi-scale mechanics problems

    Institute of Scientific and Technical Information of China (English)

    Wei Shyy; Young-Chang Cho; Wenbo Du; Amit Gupta; Chien-Chou Tseng; Ann Marie Sastry

    2011-01-01

    Successful modeling and/or design of engineering systems often requires one to address the impact of multiple “design variables” on the prescribed outcome.There are often multiple,competing objectives based on which we assess the outcome of optimization.Since accurate,high fidelity models are typically time consuming and computationally expensive,comprehensive evaluations can be conducted only if an efficient framework is available.Furthermore,informed decisions of the model/hardware's overall performance rely on an adequate understanding of the global,not local,sensitivity of the individual design variables on the objectives.The surrogate-based approach,which involves approximating the objectives as continuous functions of design variables from limited data,offers a rational framework to reduce the number of important input variables,i.e.,the dimension of a design or modeling space.In this paper,we review the fundamental issues that arise in surrogate-based analysis and optimization,highlighting concepts,methods,techniques,as well as modeling implications for mechanics problems.To aid the discussions of the issues involved,we summarize recent efforts in investigating cryogenic cavitating flows,active flow control based on dielectric barrier discharge concepts,and lithium (Li)-ion batteries.It is also stressed that many multi-scale mechanics problems can naturally benefit from the surrogate approach for “scale bridging.”

  4. Surrogating Bodies, Embodiment of Theories (Vekalet Eden Bedenler, Cisimleşen Kuramlar

    Directory of Open Access Journals (Sweden)

    Kubilay AKMAN

    2011-01-01

    Full Text Available Hollywood has intrigued critical minds through controversial films, especially in science-fiction, which might be considered as crossroads of several sociological, philosophical and cultural concepts/issues. The Surrogates (Jonathan Mostow, 2009 is one of the latest representatives in this "genre". When people of the future (let us call them Techno Sapiens use their remotely-controlled "bodies", which are just perfectly designed robots, in order to avoid having any damage in their real "bodies", meaning of body, social relations, pleasure, life, experience, risk, Etc. shift into a very complicated level that provides a wide range of opportunities to discuss contemporary sociological and theoretical lines including body and politics, power, bio-politics, gender, everyday life and so on. This paper has the intention of discussing all these theoretical issues through reading Giorgio Agamben, Michel Foucault, Gilles Deleuze, Jean Baudrillard and Slavoj Zizek. Cinema is a symptomatic field to analyze tendencies of modern societies and science-fiction has offered richer symptoms than any other genre in the history of film industry. Usually exaggeration of "now" is the way to imagine "future" in science-fiction literature and cinema. So, this paper will give us the chance to discuss what are the current "body politics" drive modern people towards the dystopia of The Surrogates. Critical concepts of the above mentioned theorists/thinkers will be corner-stones of our experience for "practicing theory" around The Surrogates.

  5. Kriging-based generation of optimal databases as forward and inverse surrogate models

    Science.gov (United States)

    Bilicz, S.; Lambert, M.; Gyimóthy, Sz

    2010-07-01

    Numerical methods are used to simulate mathematical models for a wide range of engineering problems. The precision provided by such simulators is usually fine, but at the price of computational cost. In some applications this cost might be crucial. This leads us to consider cheap surrogate models in order to reduce the computation time still meeting the precision requirements. Among all available surrogate models, we deal herein with the generation of an 'optimal' database of pre-calculated results combined with a simple interpolator. A database generation approach is investigated which is intended to achieve an optimal sampling. Such databases can be used for the approximate solution of both forward and inverse problems. Their structure carries some meta-information about the involved physical problem. In the case of the inverse problem, an approach for predicting the uncertainty of the solution (due to the applied surrogate model and/or the uncertainty of the measured data) is presented. All methods are based on kriging—a stochastic tool for function approximation. Illustrative examples are drawn from eddy current non-destructive evaluation.

  6. Surrogate/spent fuel sabotage : aerosol ratio test program and Phase 2 test results.

    Energy Technology Data Exchange (ETDEWEB)

    Borek, Theodore Thaddeus III; Thompson, N. Slater (U.S. Department of Energy); Sorenson, Ken Bryce; Hibbs, R.S. (U.S. Department of Energy); Nolte, Oliver (Fraunhofer Institut fur Toxikologie und Experimentelle Medizin, Germany); Molecke, Martin Alan; Autrusson, Bruno (Institut de Radioprotection et de Surete Nucleaire, France); Young, F. I. (U.S. Nuclear Regulatory Commission); Koch, Wolfgang (Fraunhofer Institut fur Toxikologie und Experimentelle Medizin, Germany); Brochard, Didier (Institut de Radioprotection et de Surete Nucleaire, France); Pretzsch, Gunter Guido (Gesellschaft fur Anlagen- und Reaktorsicherheit, Germany); Lange, Florentin (Gesellschaft fur Anlagen- und Reaktorsicherheit, Germany)

    2004-05-01

    A multinational test program is in progress to quantify the aerosol particulates produced when a high energy density device, HEDD, impacts surrogate material and actual spent fuel test rodlets. This program provides needed data that are relevant to some sabotage scenarios in relation to spent fuel transport and storage casks, and associated risk assessments; the program also provides significant political benefits in international cooperation. We are quantifying the spent fuel ratio, SFR, the ratio of the aerosol particles released from HEDD-impacted actual spent fuel to the aerosol particles produced from surrogate materials, measured under closely matched test conditions. In addition, we are measuring the amounts, nuclide content, size distribution of the released aerosol materials, and enhanced sorption of volatile fission product nuclides onto specific aerosol particle size fractions. These data are crucial for predicting radiological impacts. This document includes a thorough description of the test program, including the current, detailed test plan, concept and design, plus a description of all test components, and requirements for future components and related nuclear facility needs. It also serves as a program status report as of the end of FY 2003. All available test results, observations, and analyses - primarily for surrogate material Phase 2 tests using cerium oxide sintered ceramic pellets are included. This spent fuel sabotage - aerosol test program is coordinated with the international Working Group for Sabotage Concerns of Transport and Storage Casks, WGSTSC, and supported by both the U.S. Department of Energy and Nuclear Regulatory Commission.

  7. Ignition of alkane-rich FACE gasoline fuels and their surrogate mixtures

    KAUST Repository

    Sarathy, Mani

    2015-01-01

    Petroleum derived gasoline is the most used transportation fuel for light-duty vehicles. In order to better understand gasoline combustion, this study investigated the ignition propensity of two alkane-rich FACE (Fuels for Advanced Combustion Engines) gasoline test fuels and their corresponding PRF (primary reference fuel) blend in fundamental combustion experiments. Shock tube ignition delay times were measured in two separate facilities at pressures of 10, 20, and 40 bar, temperatures from 715 to 1500 K, and two equivalence ratios. Rapid compression machine ignition delay times were measured for fuel/air mixtures at pressures of 20 and 40 bar, temperatures from 632 to 745 K, and two equivalence ratios. Detailed hydrocarbon analysis was also performed on the FACE gasoline fuels, and the results were used to formulate multi-component gasoline surrogate mixtures. Detailed chemical kinetic modeling results are presented herein to provide insights into the relevance of utilizing PRF and multi-component surrogate mixtures to reproduce the ignition behavior of the alkane-rich FACE gasoline fuels. The two FACE gasoline fuels and their corresponding PRF mixture displayed similar ignition behavior at intermediate and high temperatures, but differences were observed at low temperatures. These trends were mimicked by corresponding surrogate mixture models, except for the amount of heat release in the first stage of a two-stage ignition events, when observed. © 2014 The Combustion Institute.

  8. Crack Identification of Cantilever Plates Based on a Kriging Surrogate Model.

    Science.gov (United States)

    Gao, Haiyang; Guo, Xinglin; Ouyang, Huajiang; Han, Fang

    2013-10-01

    This work presents an effective method to identify the tip locations of an internal crack in cantilever plates based on a Kriging surrogate model. Samples of varying crack parameters (tip locations) and their corresponding root mean square (RMS) of random responses are used to construct the initial Kriging surrogate model. Moreover, the pseudo excitation method (PEM) is employed to speed up the spectral analysis. For identifying crack parameters based on the constructed Kriging model, a robust stochastic particle swarm optimization (SPSO) algorithm is adopted for enhancing the global searching ability. To improve the accuracy of the surrogate model without using extensive samples, a small number of samples are first used. Then an optimal point-adding process is carried out to reduce computational cost. Numerical studies of a cantilever plate with an internal crack are performed. The effectiveness and efficiency of this method are demonstrated by the identified results. The effect of initial sampling size on the precision of the identified results is also investigated.

  9. Using (d,pγ) as a Surrogate for Neutron Capture with ^75As

    Science.gov (United States)

    Peters, W. A.; Cizewski, J. A.; Hatarik, R.; O'Malley, P.; Vieira, D. J.; Jandel, M.; Wilhelmy, J. B.; Matei, C.; Bardayan, D. W.; Smith, M. S.; Pain, S. D.; Jones, K. L.; Moazen, B. H.; Chae, K. Y.; Kozub, R. L.; Shriner, J.; Blackmon, J. C.

    2008-10-01

    Arsenic is used as a radiochemical neutron fluence detector for nuclear reactions and other applications. The abundances of the residual isotopes ^73,74As allow one to calculate the total neutron activity through (n,2n) or (n,γ) reactions along the isotopic network chain. The neutron capture reaction cross sections used for these calculations cannot be directly measured for the radioactive isotopes, but the (d,pγ) reaction as a surrogate for the (n,γ) reaction can be measured. An experiment at Oak Ridge National Laboratory using As beams in inverse kinematics and a deuterated target will first measure the ^75As(d,pγ) reaction with stable beam to test the efficacy of our surrogate experimental techniques. With a tight geometry, eight ORRUBA silicon-strip detectors will detect recoil protons in coincidence with γ-rays detected by four high-purity segmented Ge clover detectors. Status and future goals for the As(d,pγ) surrogate campaign will be presented.

  10. Synthetic aperture acoustic measurements of stationary suspended cinderblock and surrogate substitutes

    Science.gov (United States)

    Bishop, Steven; Woods, Teresa; Vignola, Joe; Judge, John; Soumekh, Mehrdad

    2009-05-01

    A synthetic aperture acoustic approach is used as a standoff method to assess material properties of a typical cinder block, referred to as a concrete masonry unit (CMU), and a variety of CMU surrogates. The objective is to identify anomalies in CMU wall surfaces. The acoustic specular return and phase change across the blocks are the fundamental measurements of interest. The CMU surrogates are created from commercially available closed cell expanding foam. Results from three test articles are presented that show potentially exploitable differences in terms of acoustic magnitude and acoustic phase response between the surrogates and typical CMUs. The test articles are; a typical CMU, a foam block, and a foam block with an embedded steel object. All test articles are similar in size and shape, and both foam blocks are covered in grout so that surface appearance closely matches that of a CMU. The results show that each of the test articles has characteristics that may be used for discrimination and anomaly detection.

  11. Upper and Lower Neck Loads in Belted Human Surrogates in Frontal Impacts

    Science.gov (United States)

    Yoganandan, Narayan; Pintar, Frank A.; Moore, Jason; Rinaldi, James; Schlick, Michael; Maiman, Dennis J.

    2012-01-01

    The upper and lower neck loads in the restrained Hybrid III dummy and Test Device for Human Occupant Restraint (THOR) were computed in simulated frontal impact sled tests at low, medium, and high velocities; repeatability performance of the two dummies were evaluated at all energy inputs; peak forces and moments were compared with computed loads at the occipital condyles and cervical-thoracic junctions from tests using post mortem human surrogates (PMHS). A custom sled buck was used to position the surrogates. Repeated tests were conducted at each velocity for each dummy and sufficient time was allowed to elapse between the two experiments. The upper and lower neck forces and moments were determined from load cell measures and its locations with respect to the ends of the neck. Both dummies showed good repeatability for axial and shear forces and bending moments at all changes in velocity inputs. Morphological characteristics in the neck loading responses were similar in all surrogates, although the peak magnitudes of the variables differed. In general, the THOR better mimicked the PMHS response than the Hybrid III dummy, and factors such as neck design and chest compliance were attributed to the observed variations. While both dummies were not designed for use at the two extremes of the tested velocities, results from the present study indicate that, currently the THOR may be the preferred anthropomorphic testing device in crashworthiness research studies and full-scale vehicle tests at all velocities. PMID:23169123

  12. Measuring (n,f) cross sections of plutonium nuclei via the surrogate method

    Science.gov (United States)

    Hughes, R. O.; Beausang, C. W.; Ross, T. J.; Gell, K.; Good, E.; Tarlow, T.; Burke, J. T.; Casperson, R. J.; McCleskey, M.; Saastamoinen, A.; Cooper, N.; Humby, P.

    2012-10-01

    Neutron-induced cross section measurements of exotic nuclei provide a significant experimental challenge due to the need for radioactive targets and high neutron fluxes. Over the past few years the surrogate method has been shown to provide a means of indirectly measuring certain neutron-induced cross sections. Recent results benchmarking (p,t-f) and (p,d-f) reactions as surrogates for (n,f) cross section measurements in uranium nuclei show good agreement with literature data [1]. Building on this work, the use of (p,t-f) and (p,d-f) reactions has very recently been extended to surrogate measurements of the poorly established ^236Pu(n,f) and ^237Pu(n,f) cross sections. The experiment was performed at Texas A&M University using a 30 MeV proton beam from the K150 cyclotron, incident on ^239Pu and ^235U targets. Charged particle-fission and charged particle-γ coincidence data were collected using the combined silicon telescope and γ-ray array: STARLiTe. Preliminary results will be presented. This work was supported by DoE Grant Numbers: DE-FG52-09 NA29454 and DE-FG02-05 ER41379 (UR) and DE-AC52-07 NA27344 (LLNL).[4pt] [1] R.O. Hughes et al., PRC 85, 024613 (2012).

  13. Surrogate endpoints for EDSS worsening in multiple sclerosis. A meta-analytic approach.

    Science.gov (United States)

    Sormani, M P; Bonzano, L; Roccatagliata, L; Mancardi, G L; Uccelli, A; Bruzzi, P

    2010-07-27

    To evaluate whether the effects on potential surrogate endpoints, such as MRI markers and relapses, observed in trials of experimental treatments are able to predict the effects of these treatments on disability progression as defined in relapsing-remitting multiple sclerosis (RRMS) trials. We used a pooled analysis of all the published randomized controlled clinical trials in RRMS reporting data on Expanded Disability Status Scale (EDSS) worsening and relapses or MRI lesions or both. We extracted data on relapses, MRI lesions, and the proportion of progressing patients. A regression analysis weighted on trial size and duration was performed to study the relationship between the treatment effect observed in each trial on relapses and MRI lesions and the observed treatment effect on EDSS worsening. A set of 19 randomized double-blind controlled trials in RRMS were identified, for a total of 44 arms, 25 contrasts, and 10,009 patients. A significant correlation was found between the effect of treatments on relapses and the effect of treatments on EDSS worsening: the adjusted R(2) value of the weighted regression was 0.71. The correlation between the treatment effect on MRI lesions and EDSS worsening was slightly weaker (R(2) = 0.57) but significant. These findings support the use of commonly used surrogate markers of EDSS worsening as endpoints in multiple sclerosis clinical trials. Further research is warranted to validate surrogate endpoints at the individual level rather than at the trial level, to draw important conclusions in the management of the individual patient.

  14. Multi-objective optimisation of a vehicle energy absorption structure based on surrogate model

    Institute of Scientific and Technical Information of China (English)

    谢素超; 周辉

    2014-01-01

    In order to optimize the crashworthy characteristic of energy-absorbing structures, the surrogate models of specific energy absorption (SEA) and ratio of SEA to initial peak force (REAF) with respect to the design parameters were respectively constructed based on surrogate model optimization methods (polynomial response surface method (PRSM) and Kriging method (KM)). Firstly, the sample data were prepared through the design of experiment (DOE). Then, the test data models were set up based on the theory of surrogate model, and the data samples were trained to obtain the response relationship between the SEA & REAF and design parameters. At last, the structure optimal parameters were obtained by visual analysis and genetic algorithm (GA). The results indicate that the KM, where the local interpolation method is used in Gauss correlation function, has the highest fitting accuracy and the structure optimal parameters are obtained as: the SEA of 29.8558 kJ/kg (corresponding toa=70 mm andt= 3.5 mm) and REAF of 0.2896 (corresponding toa=70 mm andt=1.9615 mm). The basis function of the quartic PRSM with higher order than that of the quadratic PRSM, and the mutual influence of the design variables are considered, so the fitting accuracy of the quartic PRSM is higher than that of the quadratic PRSM.

  15. Single-site Lennard-Jones models via polynomial chaos surrogates of Monte Carlo molecular simulation

    KAUST Repository

    Kadoura, Ahmad Salim

    2016-06-01

    In this work, two Polynomial Chaos (PC) surrogates were generated to reproduce Monte Carlo (MC) molecular simulation results of the canonical (single-phase) and the NVT-Gibbs (two-phase) ensembles for a system of normalized structureless Lennard-Jones (LJ) particles. The main advantage of such surrogates, once generated, is the capability of accurately computing the needed thermodynamic quantities in a few seconds, thus efficiently replacing the computationally expensive MC molecular simulations. Benefiting from the tremendous computational time reduction, the PC surrogates were used to conduct large-scale optimization in order to propose single-site LJ models for several simple molecules. Experimental data, a set of supercritical isotherms, and part of the two-phase envelope, of several pure components were used for tuning the LJ parameters (ε, σ). Based on the conducted optimization, excellent fit was obtained for different noble gases (Ar, Kr, and Xe) and other small molecules (CH4, N2, and CO). On the other hand, due to the simplicity of the LJ model used, dramatic deviations between simulation and experimental data were observed, especially in the two-phase region, for more complex molecules such as CO2 and C2 H6.

  16. The neutron within the deuteron as a surrogate for neutron-induced reactions

    CERN Document Server

    Bertulani, C A; Hussein, M S; Shubhchintak,; Tran, Viet Nhan Hao

    2016-01-01

    We propose the use of neutron poisons in reactions induced by radioactive beams as a test of theoretical models aiming to relate neutron capture in nuclei with neutron surrogate reactions such as (d,p) reactions. We exploit the approximations necessary to obtain a direct relation between the two reactions; surrogate vs. neutron capture. We also show how this is intimately related to the momentum distribution of the neutron within the deuteron. The models we use are based on the theory of inclusive breakup reactions commonly employed in the treatment of incomplete fusion and surrogate method. Such theories were developed in the 80's by Ichimura, Autern and Vincent [Phys. Rev. C 32, 431 (1985)], Udagawa and Tamura [Phys. Rev. C 24, 1348 (1981)] and Hussein and McVoy [Nucl. Phys. A 445, 124 (1985)]. We use these theories to derive an expression for the proton yield in the reaction A(d,p)B. The capture reaction $n + A \\rightarrow B$ is then extracted using reasonable approximations. By recalling an old method pro...

  17. Deducing the 237U(n,f) cross-section using the Surrogate Ratio Method

    Energy Technology Data Exchange (ETDEWEB)

    Burke, J T; Bernstein, L A; Escher, J; Ahle, L; Church, J A; Dietrich, F; Moody, K J; Norman, E B; Phair, L W; Fallon, P; Clark, R; Delaplanque, M; Descovich, M; Cromaz, M; Lee, I Y; Macchiavelli, A O; McMahan, M A; Moretto, L G; Rodriguez-Vieitez, E; Stephens, F S

    2005-08-16

    The authors have deduced the {sup 237}U(n,f) cross-section over an equivalent neutron energy range of 0 to 20 MeV using the Surrogate Ratio method. A 55 MeV {sup 4}He{sup 2+} beam from the 88 Inch Cyclotron at Lawrence Berkeley National Laboratory was used to induce fission in the following reactions {sup 238}U({alpha},{alpha}'f) and {sup 236}U({alpha},{alpha}'f). The {sup 238}U reaction was a surrogate for {sup 237}U(n,f) and the {sup 236}U reaction was used as a surrogate for {sup 235}U(n,f). The energies of the scattered alpha particles were detected in a fully depleted segmented silicon telescope array (STARS) over an angle range of 35{sup o} to 60{sup o} with respect to the beam axis. The fission fragments were detected in a third independent silicon detector located at backward angles between 106{sup o} to 131{sup o}.

  18. Asymptotic ideal observers and surrogate figures of merit for signal detection with list-mode data.

    Science.gov (United States)

    Clarkson, Eric

    2012-10-01

    The asymptotic form for the likelihood ratio is derived for list-mode data generated by an imaging system viewing a possible signal in a randomly generated background. This calculation provides an approximation to the likelihood ratio that is valid in the limit of large number of list entries, i.e., a large number of photons. These results are then used to derive surrogate figures of merit, quantities that are correlated with ideal-observer performance on detection tasks, as measured by the area under the receiver operating characteristic curve, but are easier to compute. A key component of these derivations is the determination of asymptotic forms for the Fisher information for the signal amplitude in the limit of a large number of counts or a long exposure time. This quantity is useful in its own right as a figure of merit (FOM) for the task of estimating the signal amplitude. The use of the Fisher information in detection tasks is based on the fact that it provides an approximation for ideal-observer detectability when the signal is weak. For both the fixed-count and fixed-time cases, four surrogate figures of merit are derived. Two are based on maximum likelihood reconstructions; one uses the characteristic functional of the random backgrounds. The fourth surrogate FOM is identical in the two cases and involves an integral over attribute space for each of a randomly generated sequence of backgrounds.

  19. Surrogate models of precessing numerical relativity gravitational waveforms for use in parameter estimation

    Science.gov (United States)

    Blackman, Jonathan; Field, Scott; Galley, Chad; Hemberger, Daniel; Scheel, Mark; Schmidt, Patricia; Smith, Rory; SXS Collaboration Collaboration

    2016-03-01

    We are now in the advanced detector era of gravitational wave astronomy, and the merger of two black holes (BHs) is one of the most promising sources of gravitational waves that could be detected on earth. To infer the BH masses and spins, the observed signal must be compared to waveforms predicted by general relativity for millions of binary configurations. Numerical relativity (NR) simulations can produce accurate waveforms, but are prohibitively expensive to use for parameter estimation. Other waveform models are fast enough but may lack accuracy in portions of the parameter space. Numerical relativity surrogate models attempt to rapidly predict the results of a NR code with a small or negligible modeling error, after being trained on a set of input waveforms. Such surrogate models are ideal for parameter estimation, as they are both fast and accurate, and have already been built for the case of non-spinning BHs. Using 250 input waveforms, we build a surrogate model for waveforms from the Spectral Einstein Code (SpEC) for a subspace of precessing systems.

  20. Novel brain-penetrating oximes for reactivation of cholinesterase inhibited by sarin and VX surrogates.

    Science.gov (United States)

    Chambers, Janice E; Meek, Edward C; Chambers, Howard W

    2016-06-01

    Current oxime reactivators for organophosphate-inhibited cholinesterase (ChE) do not effectively cross the blood-brain barrier and therefore cannot restore brain ChE activity in vivo. Our laboratories have studied highly relevant sarin and VX surrogates, which differ from their respective nerve agents only in the leaving group and thereby leave ChE phosphylated with the same chemical moiety as sarin and VX. Our laboratories have developed novel substituted phenoxyalkyl pyridinium oximes that lead to reduced ChE inhibition in the brains of rats challenged with a high sublethal dosage of the sarin surrogate, whereas 2-PAM did not, using a paradigm designed to demonstrate brain penetration. In addition, treatment of rats with these novel oximes is associated with attenuation of seizure-like behavior compared to rats treated with 2-PAM, providing additional evidence that the oximes penetrate the blood-brain barrier. Further, some of the oximes provided 24-h survival superior to 2-PAM, and shortened the duration of seizure-like behavior when rats were challenged with lethal dosages of the sarin and VX surrogates, providing additional support for the conclusion that these oximes penetrate the brain.

  1. Effective-one-body waveforms for binary neutron stars using surrogate models

    CERN Document Server

    Lackey, Benjamin D; Galley, Chad R; Meidam, Jeroen; Broeck, Chris Van Den

    2016-01-01

    Gravitational-wave observations of binary neutron star systems can provide information about the masses, spins, and structure of neutron stars. However, this requires accurate and computationally efficient waveform models that take <1s to evaluate for use in Bayesian parameter estimation codes that perform 10^7 - 10^8 waveform evaluations. We present a surrogate model of a nonspinning effective-one-body waveform model with l = 2, 3, and 4 tidal multipole moments that reproduces waveforms of binary neutron star numerical simulations up to merger. The surrogate is built from compact sets of effective-one-body waveform amplitude and phase data that each form a reduced basis. We find that 12 amplitude and 7 phase basis elements are sufficient to reconstruct any binary neutron star waveform with a starting frequency of 10Hz. The surrogate has maximum errors of 3.8% in amplitude (0.04% excluding the last 100M before merger) and 0.043 radians in phase. The version implemented in the LIGO Algorithm Library takes ~...

  2. The ionic strength effect on microcystin and natural organic matter surrogate adsorption onto PAC.

    Science.gov (United States)

    Campinas, Margarida; Rosa, Maria João

    2006-07-15

    This work aims to contribute to a better understanding of the ionic strength effect on microcystin and natural organic matter (NOM) surrogate adsorption by analyzing the importance of adsorbate molecular size, and surface concentration. Adsorption kinetics and/or isotherms were performed on PAC Norit SA-UF for four microcystin variants (MC-LR, MC-LY, MC-LW, MC-LF), and three NOM surrogates (salicylic acid (SA), tannic acid (TA), Aldrich humic acid (AHA)) at different solution ionic strengths. Results showed that the ionic strength effect depends upon the adsorbate surface concentration, cation charge (mono or divalent), and adsorbate molecular size. Potassium seemed not to affect the MC-LR adsorption, while calcium enhanced MC-LR kinetics and adsorption capacity. K+ and, particularly, Ca2+ improved the adsorption kinetics of the other microcystin variants. For identical surface concentration and ionic strength, the impact of K+ and Ca2+ on NOM surrogates depended on the adsorbate molecular size: K+ effect was only observed for AHA, whereas Ca2+ caused no effect on SA adsorption, slightly enhanced TA adsorption, and greatly enhanced AHA adsorption. MC-LR isotherms with two salt concentrations (KCl or CaCl2) indicated that, for the studied range of equilibrium surface concentration (5.3-18.7 mg/g), an enhanced adsorption regime prevails, and no transition regime was observed.

  3. Cross sections for neutron capture from surrogate measurements: An examination of Weisskopf-Ewing and ratio approximations

    CERN Document Server

    Escher, Jutta E

    2010-01-01

    Motivated by the renewed interest in the surrogate nuclear reactions approach, an indirect method for determining compound-nuclear reaction cross sections, the prospects for determining (n, gamma) cross sections for deformed rare-earth and actinide nuclei are investigated. A nuclear-reaction model is employed to simulate physical quantities that are typically measured in surrogate experiments and used to assess the validity of the Weisskopf-Ewing and ratio approximations, which are typically employed in the analysis of surrogate reactions. The expected accuracy of (n,gamma) cross sections extracted from typical surrogate measurements is discussed and limitations of the approximate methods are illustrated. Suggestions for moving beyond presently-employed approximations are made.

  4. Optimal Recovery on the Classes of Functions with Bounded Mixed Derivative

    Institute of Scientific and Technical Information of China (English)

    Gen Sun FANG; Li Qin DUAN

    2009-01-01

    Temlyakov considered the optimal recovery on the classes of functions with bounded mixed derivative in the Lp metrics and gave the upper estimates of the optimal recovery errors. In this paper, we determine the asymptotic orders of the optimal recovery in Sobolev spaces by standard information, i.e., function values, and give the nearly optimal algorithms which attain the asymptotic orders of the optimal recovery.

  5. A Bumpy Recovery

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The world economy crawls ahead amid risk and uncertainty The world economic situation has been extremely complicated in 2010. This year saw fluctuating market confidence,changing commodity prices, imbalanced economic recovery, diverse economic policies, lingering trade protectionism, and fierce currency battles.

  6. Recovery post ICU.

    Science.gov (United States)

    Jones, Christina

    2014-10-01

    Many ICU patients struggle to recovery following critical illness and may be left with physical, cognitive and psychological problems, which have a negative impact on their quality of life. Gross muscle mass loss and weakness can take some months to recover after the patients' Intensive Care Unit (ICU) discharge, in addition critical illness polyneuropathies can further complicate physical recovery. Psychological problems such as anxiety, depression and post traumatic stress disorder (PTSD) are common and have an negative impact on the patients' ability to engage in rehabilitation after ICU discharge. Finally cognitive deficit affecting memory can be a significant problem. The first step in helping patients to recover from such a devastating illness is to recognise those who have the greatest need and target interventions. Research now suggests that there are interventions that can accelerate physical recovery and reduce the incidence of psychological problems such as anxiety, depression and PTSD. Cognitive rehabilitation, however, is still in its infancy. This review will look at the research into patients' recovery and what can be done to improve this where needed.

  7. Sulfur recovery further improved

    Energy Technology Data Exchange (ETDEWEB)

    Borsboom, J.; Grinsven, M. van; Warners, A. van [Jacobs Nederland B.V., (Netherlands); Nisselrooy, P. van [Gastec N.V., (Netherlands)

    2002-04-01

    The original 100-year-old Claus process for producing sulfur from hydrogen sulfide in acid gas is described together with improvements which have been made over the years. The most recent modification, EUROCLAUS, achieves sulfur recoveries of 99-99.9 per cent. Five commercial units are being designed.

  8. Recovery of Interdependent Networks

    CERN Document Server

    Di Muro, M A; Stanley, H E; Havlin, S; Braunstein, L A

    2015-01-01

    Recent network research has focused on the cascading failures in a system of interdependent networks and the necessary preconditions for system collapse. An important question that has not been addressed is how to repair a failing system before it suffers total breakdown. Here we introduce a recovery strategy of nodes and develop an analytic and numerical framework for studying the concurrent failure and recovery of a system of interdependent networks based on an efficient and practically reasonable strategy. Our strategy consists of repairing a fraction of failed nodes, with probability of recovery $\\gamma$, that are neighbors of the largest connected component of each constituent network. We find that, for a given initial failure of a fraction $1-p$ of nodes, there is a critical probability of recovery above which the cascade is halted and the system fully restores to its initial state and below which the system abruptly collapses. As a consequence we find in the plane $\\gamma-p$ of the phase diagram three ...

  9. Cost Recovery Through Depreciation.

    Science.gov (United States)

    Forrester, Robert T.; Wesolowski, Leonard V.

    1983-01-01

    The approach of adopting depreciation rather than use allowance in order to recover more accurately the cost of college buildings and equipment used on federal projects is considered. It is suggested that depreciation will offer most colleges and universities a higher annual recovery rate, and an opportunity for better facilities planning. For…

  10. Recovery in the East

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    As robust as the economic recovery in East Asia has been in recent months,attention must now be turned to managing emerging risks challenging macroeconomic stability,said World Bank’s latest East Asia and Pacific Economic Update released on October 19.Edited excerpts follow

  11. Coastal aquifer management based on surrogate models and multi-objective optimization

    Science.gov (United States)

    Mantoglou, A.; Kourakos, G.

    2011-12-01

    The demand for fresh water in coastal areas and islands can be very high, especially in summer months, due to increased local needs and tourism. In order to satisfy demand, a combined management plan is proposed which involves: i) desalinization (if needed) of pumped water to a potable level using reverse osmosis and ii) injection of biologically treated waste water into the aquifer. The management plan is formulated into a multiobjective optimization framework, where simultaneous minimization of economic and environmental costs is desired; subject to a constraint to satisfy demand. The method requires modeling tools, which are able to predict the salinity levels of the aquifer in response to different alternative management scenarios. Variable density models can simulate the interaction between fresh and saltwater; however, they are computationally intractable when integrated in optimization algorithms. In order to alleviate this problem, a multi objective optimization algorithm is developed combining surrogate models based on Modular Neural Networks [MOSA(MNN)]. The surrogate models are trained adaptively during optimization based on a Genetic Algorithm. In the crossover step of the genetic algorithm, each pair of parents generates a pool of offspring. All offspring are evaluated based on the fast surrogate model. Then only the most promising offspring are evaluated based on the exact numerical model. This eliminates errors in Pareto solution due to imprecise predictions of the surrogate model. Three new criteria for selecting the most promising offspring were proposed, which improve the Pareto set and maintain the diversity of the optimum solutions. The method has important advancements compared to previous methods, e.g. alleviation of propagation of errors due to surrogate model approximations. The method is applied to a real coastal aquifer in the island of Santorini which is a very touristy island with high water demands. The results show that the algorithm

  12. (Terminology standardization)

    Energy Technology Data Exchange (ETDEWEB)

    Strehlow, R.A.

    1990-10-19

    Terminological requirements in information management was but one of the principal themes of the 2nd Congress on Terminology and Knowledge Engineering. The traveler represented the American Society for Testing and Materials' Committee on Terminology, of which he is the Chair. The traveler's invited workshop emphasized terminology standardization requirements in databases of material properties as well as practical terminology standardizing methods. The congress included six workshops in addition to approximately 82 lectures and papers from terminologists, artificial intelligence practitioners, and subject specialists from 18 countries. There were approximately 292 registrants from 33 countries who participated in the congress. The congress topics were broad. Examples were the increasing use of International Standards Organization (ISO) Standards in legislated systems such as the USSR Automated Data Bank of Standardized Terminology, the enhanced Physics Training Program based on terminology standardization in Physics in the Chinese province of Inner Mongolia, and the technical concept dictionary being developed at the Japan Electronic Dictionary Research Institute, which is considered to be the key to advanced artificial intelligence applications. The more usual roles of terminology work in the areas of machine translation. indexing protocols, knowledge theory, and data transfer in several subject specialties were also addressed, along with numerous special language terminology areas.

  13. Performance comparison of several response surface surrogate models and ensemble methods for water injection optimization under uncertainty

    Science.gov (United States)

    Babaei, Masoud; Pan, Indranil

    2016-06-01

    In this paper we defined a relatively complex reservoir engineering optimization problem of maximizing the net present value of the hydrocarbon production in a water flooding process by controlling the water injection rates in multiple control periods. We assessed the performance of a number of response surface surrogate models and their ensembles which are combined by Dempster-Shafer theory and Weighted Averaged Surrogates as found in contemporary literature works. Most of these ensemble methods are based on the philosophy that multiple weak learners can be leveraged to obtain one strong learner which is better than the individual weak ones. Even though these techniques have been shown to work well for test bench functions, we found them not offering a considerable improvement compared to an individually used cubic radial basis function surrogate model. Our simulations on two and three dimensional cases, with varying number of optimization variables suggest that cubic radial basis functions-based surrogate model is reliable, outperforms Kriging surrogates and multivariate adaptive regression splines, and if it does not outperform, it is rarely outperformed by the ensemble surrogate models.

  14. The kinetic and thermodynamic sorption and stabilization of multiwalled carbon nanotubes in natural organic matter surrogate solutions: the effect of surrogate molecular weight.

    Science.gov (United States)

    Li, Tingting; Lin, Daohui; Li, Lu; Wang, Zhengyu; Wu, Fengchang

    2014-03-01

    Styrene sulfonate (SS) and polystyrene sulfonates (PSSs) were used as surrogates of natural organic matter to study the effect of molecular weight (from 206.2 to 70,000 Da) on their sorption by a multiwalled carbon nanotube (MWCNT) and an activated carbon (AC) and on their stabilization of MWCNT suspension. Results indicate that surface-diffusion through the liquid-sorbent boundary was the rate-controlling step of the kinetic sorption of both MWCNTs and AC, and surface-occupying and pore-filling mechanisms respectively dominated the thermodynamic sorption of MWCNTs and AC. Sorption rates and capacities of MWCNTs and AC in molecular concentration of SS and PSS decreased with increasing molecular weight. The PSSs but not SS facilitated the stabilization of MWCNT suspension because of the increased electrosteric repulsion. The PSSs with more monomers had greater capabilities to stabilize the MWCNT suspension, but the capabilities were comparable after being normalized by the total monomer number.

  15. Simultaneous determination of endocannabinoids in murine plasma and brain substructures by surrogate-based LC-MS/MS: Application in tumor-bearing mice.

    Science.gov (United States)

    Gong, Yuan; Li, Xinmin; Kang, Lei; Xie, Ying; Rong, Zhengxing; Wang, Hao; Qi, Hong; Chen, Hongzhuan

    2015-01-01

    The endocannabinoids (eCBs), N-arachidonoylethanolamine (anandamide, AEA) and 2-ararchidonylglycerol (2-AG) have been identified as main endogenous ligands for cannabinoid receptors. Developing a sensitive and robust method to determine AEA and 2-AG has been shown to be essential to understand their effects in stress regulation and the pathogenesis of affective disorders. Since eCBs are endogenous molecules, there is no true blank matrix available to construct calibration curves, thus, it has been a challenge to determine eCBs in plasma and brain matrix. A liquid chromatography tandem mass spectrometry (LC-MS/MS) method is developed to determine the concentrations of AEA and 2-AG in murine plasma and different brain substructures (prefrontal cortex, hippocampus and hypothalamus). To overcome the endogenous interference, a "surrogate analyte" approach was adopted using stable isotope-labeled standards as surrogates of authentic analytes to generate calibration curves in biological matrix. The mobile phase, composed of formic acid 0.1% in water-acetonitrile (40:60, v/v), was optimized to separate 2-AG and its non-bioactive isomer 1-AG. The analytes were extracted with ethyl acetate/n-hexane (9:1, v/v) and separated on an Xbridge C18 (2.1 × 100 mm, 3.5 μm) column using N-Oleoylethanolamine-d2 (OEA-d2) as the internal standard. Detection was performed in multiple reaction monitoring (MRM) mode with an electrospray ionization source operated in positive ion mode. The method was applied to assess plasma and brain eCBs in tumor-bearing mice.

  16. Four-Dimensional Magnetic Resonance Imaging Using Axial Body Area as Respiratory Surrogate: Initial Patient Results

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Juan [Department of Radiation Oncology, Duke University Medical Center, Durham, North Carolina (United States); School of Information Science and Engineering, Shandong University, Jinan, Shandong (China); Cai, Jing [Department of Radiation Oncology, Duke University Medical Center, Durham, North Carolina (United States); Wang, Hongjun [School of Information Science and Engineering, Shandong University, Jinan, Shandong (China); Chang, Zheng; Czito, Brian G. [Department of Radiation Oncology, Duke University Medical Center, Durham, North Carolina (United States); Bashir, Mustafa R. [Department of Radiology, Duke University Medical Center, Durham, North Carolina (United States); Yin, Fang-Fang, E-mail: fangfang.yin@duke.edu [Department of Radiation Oncology, Duke University Medical Center, Durham, North Carolina (United States)

    2014-03-15

    Purpose: To evaluate the feasibility of a retrospective binning technique for 4-dimensional magnetic resonance imaging (4D-MRI) using body area (BA) as a respiratory surrogate. Methods and Materials: Seven patients with hepatocellular carcinoma (4 of 7) or liver metastases (3 of 7) were enrolled in an institutional review board-approved prospective study. All patients were simulated with both computed tomography (CT) and MRI to acquire 3-dimensinal and 4D images for treatment planning. Multiple-slice multiple-phase cine-MR images were acquired in the axial plane for 4D-MRI reconstruction. Image acquisition time per slice was set to 10-15 seconds. Single-slice 2-dimensinal cine-MR images were also acquired across the center of the tumor in orthogonal planes. Tumor motion trajectories from 4D-MRI, cine-MRI, and 4D-CT were analyzed in the superior–inferior (SI), anterior–posterior (AP), and medial–lateral (ML) directions, respectively. Their correlation coefficients (CC) and differences in tumor motion amplitude were determined. Tumor-to-liver contrast-to-noise ratio (CNR) was measured and compared between 4D-CT, 4D-MRI, and conventional T2-weighted fast spin echo MRI. Results: The means (±standard deviations) of CC comparing 4D-MRI with cine-MRI were 0.97 ± 0.03, 0.97 ± 0.02, and 0.99 ± 0.04 in SI, AP, and ML directions, respectively. The mean differences were 0.61 ± 0.17 mm, 0.32 ± 0.17 mm, and 0.14 ± 0.06 mm in SI, AP, and ML directions, respectively. The means of CC comparing 4D-MRI and 4D-CT were 0.95 ± 0.02, 0.94 ± 0.02, and 0.96 ± 0.02 in SI, AP, and ML directions, respectively. The mean differences were 0.74 ± 0.02 mm, 0.33 ± 0.13 mm, and 0.18 ± 0.07 mm in SI, AP, and ML directions, respectively. The mean tumor-to-tissue CNRs were 2.94 ± 1.51, 19.44 ± 14.63, and 39.47 ± 20.81 in 4D-CT, 4D-MRI, and T2-weighted MRI, respectively. Conclusions: The preliminary evaluation of our 4D-MRI technique results in oncologic patients demonstrates its

  17. A new formulation of physical surrogates of FACE A gasoline fuel based on heating and evaporation characteristics

    KAUST Repository

    Elwardani, Ahmed Elsaid

    2016-02-19

    The US Department of Energy has formulated various sets of gasoline fuels, called fuels for advanced combustion engines (FACE), which are consistent in composition and properties. The analysis of heating and evaporation of FACE A gasoline fuel (paraffin-rich) is studied by replacing the 66 components with 19 components to represent this fuel. The reduction in the number of components is based on merging components from the same chemical groups and having the same chemical formula, which have very close thermophysical properties; the components with the highest initial compositions are chosen to be the representative components. Modelling of heating and evaporation of FACE A gasoline fuel and various surrogates is carried out based on the effective thermal conductivity/effective diffusivity model (ETC/ED). The model takes into account the effect of finite liquid thermal conductivity, finite liquid mass diffusivity and recirculation inside the droplets due to their non-zero velocities relative to the ambient air. Four surrogates of FACE A found in the literature are used in the analysis. These surrogates include the five component surrogate chosen for its ability to match the ignition delay time of the FACE A gasoline fuel (Surr1), the primary reference fuel surrogate (PRF84) that matches the research octane number (RON) of FACE A, the one that matches hydrogen-to-carbon ratio (H/C), RON, density and distillation curve with FACE A (Surr2), and the one that matches the RON based on mole fraction linear blending (Surr3). It is shown that these surrogates cannot predict adequately the time evolution of surface temperatures and radii of FACE A droplets. New \\'physical\\' surrogates with 8, 7 and 6 components (Surr4, Surr5, and Surr6) are introduced to match the evaporation characteristics of FACE A. It is found that Surr5 (7 components surrogate) can predict droplet lifetime and time evolution of surface temperature of a FACE A droplet with errors of up to 5% and 0

  18. Mechanical ventilation with heat recovery in cold climates

    DEFF Research Database (Denmark)

    Kragh, Jesper; Rose, Jørgen; Svendsen, Svend

    2005-01-01

    Building ventilation is necessary to achieve a healthy and comfortable indoor environment, but as energy prices continue to rise it is necessary to reduce the energy consumption. Using mechanical ventilation with heat recovery reduces the ventilation heat loss significantly, but in cold climates...... freezes to ice. The analysis of measurements from existing ventilation systems with heat recovery used in single-family houses in Denmark and a test of a standard heat recovery unit in the laboratory have clearly shown that this problem occurs when the outdoor temperature gets below approximately –5º......C. Due to the ice problem mechanical ventilation systems with heat recovery are often installed with an extra preheating system reducing the energy saving potential significantly. New designs of high efficient heat recovery units capable of continuously defrosting the ice without using extra energy...

  19. Frequency standards

    CERN Document Server

    Riehle, Fritz

    2006-01-01

    Of all measurement units, frequency is the one that may be determined with the highest degree of accuracy. It equally allows precise measurements of other physical and technical quantities, whenever they can be measured in terms of frequency.This volume covers the central methods and techniques relevant for frequency standards developed in physics, electronics, quantum electronics, and statistics. After a review of the basic principles, the book looks at the realisation of commonly used components. It then continues with the description and characterisation of important frequency standards

  20. Karner Blue Butterfly Recovery Plan

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This recovery plan has been prepared by the Karner Blue Butterfly Recovery Team under the leadership of Dr. David Andow, University of Minnesota-St. Paul. Dr. John...