WorldWideScience

Sample records for surgical procedures designed

  1. ANAESTHESIA FOR OPHTHALMIC SURGICAL PROCEDURES

    African Journals Online (AJOL)

    Objective: To review factors influencing the choice of anaesthesia for ophthalmic surgical procedures. ... as risk associated with general anaesthesia (8) they are more .... Wilson ME, Pandey SK, Thakur J. Paediatric cataract blindness in the ...

  2. Characterization of aerosols produced by surgical procedures

    Energy Technology Data Exchange (ETDEWEB)

    Yeh, H.C.; Muggenburg, B.A.; Lundgren, D.L.; Guilmette, R.A.; Snipes, M.B.; Jones, R.K. [Inhalation Toxicology Research Institute, Albuquerque, NM (United States); Turner, R.S. [Lovelace Health Systems, Albuquerque, NM (United States)

    1994-07-01

    In many surgeries, especially orthopedic procedures, power tools such as saws and drills are used. These tools may produce aerosolized blood and other biological material from bone and soft tissues. Surgical lasers and electrocautery tools can also produce aerosols when tissues are vaporized and condensed. Studies have been reported in the literature concerning production of aerosols during surgery, and some of these aerosols may contain infectious material. Garden et al. (1988) reported the presence of papilloma virus DNA in the fumes produced from laser surgery, but the infectivity of the aerosol was not assessed. Moon and Nininger (1989) measured the size distribution and production rate of emissions from laser surgery and found that particles were generally less than 0.5 {mu}m diameter. More recently there has been concern expressed over the production of aerosolized blood during surgical procedures that require power tools. In an in vitro study, the production of an aerosol containing the human immunodeficiency virus (HIV) was reported when power tools were used to cut tissues with blood infected with HIV. Another study measured the size distribution of blood aerosols produced by surgical power tools and found blood-containing particles in a number of size ranges. Health care workers are anxious and concerned about whether surgically produced aerosols are inspirable and can contain viable pathogens such as HIV. Other pathogens such as hepatitis B virus (HBV) are also of concern. The Occupational Safety and Health funded a project at the National Institute for Inhalation Toxicology Research Institute to assess the extent of aerosolization of blood and other tissues during surgical procedures. This document reports details of the experimental and sampling approach, methods, analyses, and results on potential production of blood-associated aerosols from surgical procedures in the laboratory and in the hospital surgical suite.

  3. Surgical Masculinization of the Breast: Clinical Classification and Surgical Procedures.

    Science.gov (United States)

    Cardenas-Camarena, Lazaro; Dorado, Carlos; Guerrero, Maria Teresa; Nava, Rosa

    2017-06-01

    Aesthetic breast area improvements for gynecomastia and gender dysphoria patients who seek a more masculine appearance have increased recently. We present our clinical experience in breast masculinization and a classification for these patients. From July 2003 to May 2014, 68 patients seeking a more masculine thorax underwent surgery. They were divided into five groups depending on three factors: excess fatty tissue, breast tissue, and skin. A specific surgical treatment was assigned according to each group. The surgical treatments included thoracic liposuction, subcutaneous mastectomy, periareolar skin resection in one or two stages, and mastectomy with a nipple areola complex graft. The evaluation was performed 6 months after surgery to determine the degree of satisfaction and presence of complications. Surgery was performed on a total of 68 patients, 45 male and 22 female, with ages ranging from 18 to 49 years, and an average age of 33 years. Liposuction alone was performed on five patients; subcutaneous mastectomy was performed on eight patients; subcutaneous mastectomy combined with liposuction was performed on 27 patients; periareolar skin resection was performed on 11 patients; and mastectomy with NAC free grafts was performed on 16 patients. The surgical procedure satisfied 94% of the patients, with very few complications. All patients who wish to obtain a masculine breast shape should be treated with only one objective regardless patient's gender: to obtain a masculine thorax. We recommend a simple mammary gland classification for determining the best surgical treatment for these patients LEVEL OF EVIDENCE V: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

  4. Natural language generation of surgical procedures.

    Science.gov (United States)

    Wagner, J C; Rogers, J E; Baud, R H; Scherrer, J R

    1999-01-01

    A number of compositional Medical Concept Representation systems are being developed. Although these provide for a detailed conceptual representation of the underlying information, they have to be translated back to natural language for used by end-users and applications. The GALEN programme has been developing one such representation and we report here on a tool developed to generate natural language phrases from the GALEN conceptual representations. This tool can be adapted to different source modelling schemes and to different destination languages or sublanguages of a domain. It is based on a multilingual approach to natural language generation, realised through a clean separation of the domain model from the linguistic model and their link by well defined structures. Specific knowledge structures and operations have been developed for bridging between the modelling 'style' of the conceptual representation and natural language. Using the example of the scheme developed for modelling surgical operative procedures within the GALEN-IN-USE project, we show how the generator is adapted to such a scheme. The basic characteristics of the surgical procedures scheme are presented together with the basic principles of the generation tool. Using worked examples, we discuss the transformation operations which change the initial source representation into a form which can more directly be translated to a given natural language. In particular, the linguistic knowledge which has to be introduced--such as definitions of concepts and relationships is described. We explain the overall generator strategy and how particular transformation operations are triggered by language-dependent and conceptual parameters. Results are shown for generated French phrases corresponding to surgical procedures from the urology domain.

  5. Veterinary Students' Recollection Methods for Surgical Procedures

    DEFF Research Database (Denmark)

    Langebaek, Rikke; Tanggaard, Lene; Berendt, Mette

    2016-01-01

    When veterinary students face their first live animal surgeries, their level of anxiety is generally high and this can affect their ability to recall the procedure they are about to undertake. Multimodal teaching methods have previously been shown to enhance learning and facilitate recall; however......, student preferences for recollection methods when translating theory into practice have not been documented. The aim of this study was to investigate veterinary students' experience with recollection of a surgical procedure they were about to perform after using multiple methods for preparation. From...... a group of 171 veterinary students enrolled in a basic surgery course, 26 students were randomly selected to participate in semi-structured interviews. Results showed that 58% of the students used a visual, dynamic method of recollection, mentally visualizing the video they had watched as part...

  6. Subsea HIPPS design procedure

    International Nuclear Information System (INIS)

    Aaroe, R.; Lund, B.F.; Onshus, T.

    1995-01-01

    The paper is based on a feasibility study investigating the possibilities of using a HIPPS (High Integrity Pressure Protection System) to protect a subsea pipeline that is not rated for full wellhead shut-in pressure. The study was called the Subsea OPPS Feasibility Study, and was performed by SINTEF, Norway. Here, OPPS is an acronym for Overpressure Pipeline Protection System. A design procedure for a subsea HIPPS is described, based on the experience and knowledge gained through the ''Subsea OPPS Feasibility Study''. Before a subsea HIPPS can be applied, its technical feasibility, reliability and profitability must be demonstrated. The subsea HIPPS design procedure will help to organize and plan the design activities both with respect to development and verification of a subsea HIPPS. The paper also gives examples of how some of the discussed design steps were performed in the Subsea OPPS Feasibility Study. Finally, further work required to apply a subsea HIPPS is discussed

  7. Image-guidance for surgical procedures

    International Nuclear Information System (INIS)

    Peters, Terry M

    2006-01-01

    Contemporary imaging modalities can now provide the surgeon with high quality three- and four-dimensional images depicting not only normal anatomy and pathology, but also vascularity and function. A key component of image-guided surgery (IGS) is the ability to register multi-modal pre-operative images to each other and to the patient. The other important component of IGS is the ability to track instruments in real time during the procedure and to display them as part of a realistic model of the operative volume. Stereoscopic, virtual- and augmented-reality techniques have been implemented to enhance the visualization and guidance process. For the most part, IGS relies on the assumption that the pre-operatively acquired images used to guide the surgery accurately represent the morphology of the tissue during the procedure. This assumption may not necessarily be valid, and so intra-operative real-time imaging using interventional MRI, ultrasound, video and electrophysiological recordings are often employed to ameliorate this situation. Although IGS is now in extensive routine clinical use in neurosurgery and is gaining ground in other surgical disciplines, there remain many drawbacks that must be overcome before it can be employed in more general minimally-invasive procedures. This review overviews the roots of IGS in neurosurgery, provides examples of its use outside the brain, discusses the infrastructure required for successful implementation of IGS approaches and outlines the challenges that must be overcome for IGS to advance further. (topical review)

  8. Coal pillar design procedures

    CSIR Research Space (South Africa)

    York, G

    2000-03-01

    Full Text Available Final Project Report Coal pillar design procedures G. York, I. Canbulat, B.W. Jack Research agency: CSIR Mining Technology Project number: COL 337 Date: March 2000 2 Executive Summary Examination of collapsed pillar cases outside of the empirical... in strength occurs with increasing specimen size. 45 40 35 30 25 20 15 10 5 0 20 40 60 80 100 120 140 160 UNIAX IA L COMPR EHEN SIV E S TR ENG TH (M Pa ) CUBE SIZE (cm) Figure 1...

  9. Evaluation of the radiation levels in different surgical procedures

    International Nuclear Information System (INIS)

    Silva Santos, M.C.P. da; Almeida, A. de; Belluci, A.D.; Ghilardi Neto, T.

    1989-01-01

    The exposure of a medical team to radiation during surgical procedures evidently depends on the duration and difficulties of the particular procedure. We have made a dosimetric study of the average equivalent doses received by the surgical teams during 10 different surgical procedures over a period of one month. Our results demonstrate that the levels of ionizing radiation that the members of the teams receive typically do not surpass the limits stipulated for the following surgical procedures: nefrolithotomy, percutaneous ureterolithomy, ureteroscoy connected with removal of stones in the inferior third of the ureter, osteosynthesis of the tibial plateau together with a articular toalet and minireconstruction of the knee. For compound surgical procedures, for example, osteosynthesis of a femur fracture together with biopsy of an exposed femur or percutaneous nefrolithotomy (complex cases), the dose limits have been surpassed owing to the additional fluoroscopy needed in those p rocedures. (author) [pt

  10. Effective and efficient learning in the operating theater with intraoperative video-enhanced surgical procedure training

    NARCIS (Netherlands)

    van Det, M.J.; Meijerink, W.J.; Hoff, C.; Middel, B.; Pierie, J.P.

    INtraoperative Video Enhanced Surgical procedure Training (INVEST) is a new training method designed to improve the transition from basic skills training in a skills lab to procedural training in the operating theater. Traditionally, the master-apprentice model (MAM) is used for procedural training

  11. Pediatric abdominal non-Hodgkin's lymphoma: diagnosis through surgical and non-surgical procedures.

    Science.gov (United States)

    Aguiar, Arthur Almeida; Lima, Luciana Cavalvanti; Araújo, Cláudia Corrêa de; Gallindo, Rodrigo Melo

    2017-12-29

    To describe the success rate and the complications after procedures to diagnose abdominal non-Hodgkin's lymphoma in children and adolescents. A retrospective cross-sectional study was conducted with a population consisting of children and adolescents with abdominal non-Hodgkin's lymphoma diagnosed between September 1994 and December 2012. The sample comprised of 100 patients who underwent 113 diagnostic procedures, including urgent surgery (n=21), elective surgery (n=36), and non-surgical diagnosis (n=56). The most frequent procedures were laparotomy (46.9%) and ultrasound-guided core biopsy (25.6%). The rate of diagnostic success was 95.2% for urgent surgeries; 100% for elective surgeries and 82.1% for non-surgical procedures (p<0.05). The rates of complication during the three diagnosis procedures considered were significant (p<0.001; 95.2% of the urgent surgeries, 83.8% of the elective surgeries, and 10.7% of the non-surgical procedures). The length of time before resuming a full diet and starting chemotherapy was significantly reduced for patients who underwent non-surgical procedures when compared with the other procedures (p<0.001). Non-surgical procedures for the diagnosis of pediatric abdominal non-Hodgkin's lymphoma are an effective option with low morbidity rate, allowing an earlier resumption of a full diet and chemotherapy initiation. Furthermore, non-surgical procedures should also be considered for obtaining tumor samples from patients with extensive disease. Copyright © 2017. Published by Elsevier Editora Ltda.

  12. Surgical procedures in patients with haemophilic arthropathy of the ankle.

    Science.gov (United States)

    Barg, A; Morris, S C; Schneider, S W; Phisitkul, P; Saltzman, C L

    2016-05-01

    In haemophilia, the ankle joint is one of the most common and earliest joints affected by recurrent bleeding, commonly resulting in end-stage ankle osteoarthritis during early adulthood. The surgical treatment of haemophilic ankle arthropathy is challenging. This review aims to highlight the literature addressing clinical outcomes following the most common approaches for different stages of haemophilia-induced ankle osteoarthritis: arthroscopic debridement, joint distraction arthroplasty, supramalleolar osteotomies, total ankle replacement, and ankle arthrodesis. A systematic literature review was performed using established medical literature databases. The following information was retrieved from the literature: patients' demographics, surgical technique, duration of follow-up, clinical outcome including pain relief and complication rate. A total of 42 clinical studies published between 1978 and 2015 were included in the systematic literature review. Eight and 34 studies had prospective and retrospective design, respectively. The most common studies were level IV studies (64.3%). The orthopaedic treatment of patients with haemophilic ankle osteoarthritis is often challenging and requires complete and careful preoperative assessment. In general, both joint-preserving and joint non-preserving procedure types can be performed. All specific relative and absolute contraindications should be considered to achieve appropriate postoperative outcomes. The current literature demonstrated that orthopaedic surgeries, with appropriate indication, in patients with haemophilic ankle arthropathy result in good postoperative results comparable to those observed in non-haemophiliacs. The surgical treatment should be performed in a setting with the ability to have multidisciplinary management, including expertise in haematology. © 2016 John Wiley & Sons Ltd.

  13. Utilization of banked blood in pediatric surgical procedures in ...

    African Journals Online (AJOL)

    ... quantities of blood but utilizing only little is tantamount to inadequate use and delays surgical intervention. Indirectly, it increases cost of surgery. There is need to rationalize our blood ordering habits without causing harm to patients. Key words: Banked Blood, Calabar – Nigeria, pediatrics, surgical procedures, utilization ...

  14. Video content analysis of surgical procedures.

    Science.gov (United States)

    Loukas, Constantinos

    2018-02-01

    In addition to its therapeutic benefits, minimally invasive surgery offers the potential for video recording of the operation. The videos may be archived and used later for reasons such as cognitive training, skills assessment, and workflow analysis. Methods from the major field of video content analysis and representation are increasingly applied in the surgical domain. In this paper, we review recent developments and analyze future directions in the field of content-based video analysis of surgical operations. The review was obtained from PubMed and Google Scholar search on combinations of the following keywords: 'surgery', 'video', 'phase', 'task', 'skills', 'event', 'shot', 'analysis', 'retrieval', 'detection', 'classification', and 'recognition'. The collected articles were categorized and reviewed based on the technical goal sought, type of surgery performed, and structure of the operation. A total of 81 articles were included. The publication activity is constantly increasing; more than 50% of these articles were published in the last 3 years. Significant research has been performed for video task detection and retrieval in eye surgery. In endoscopic surgery, the research activity is more diverse: gesture/task classification, skills assessment, tool type recognition, shot/event detection and retrieval. Recent works employ deep neural networks for phase and tool recognition as well as shot detection. Content-based video analysis of surgical operations is a rapidly expanding field. Several future prospects for research exist including, inter alia, shot boundary detection, keyframe extraction, video summarization, pattern discovery, and video annotation. The development of publicly available benchmark datasets to evaluate and compare task-specific algorithms is essential.

  15. Surgical site infection rates following laparoscopic urological procedures.

    Science.gov (United States)

    George, Arvin K; Srinivasan, Arun K; Cho, Jane; Sadek, Mostafa A; Kavoussi, Louis R

    2011-04-01

    Surgical site infections have been categorized by the Centers for Medicare and Medicaid Services as "never events". The incidence of surgical site infection following laparoscopic urological surgery and its risk factors are poorly defined. We evaluated surgical site infection following urological laparoscopic surgery and identified possible factors that may influence occurrence. Patients who underwent transperitoneal laparoscopic procedures during a 4-year period by a single laparoscopic surgeon were retrospectively reviewed. Surgical site infections were identified postoperatively and defined using the Centers for Disease Control criteria. Clinical parameters, comorbidities, smoking history, preoperative urinalysis and culture results as well as operative data were analyzed. Nonparametric testing using the Mann-Whitney U test, multivariable logistic regression and Spearman's rank correlation coefficient were used for data analysis. In 556 patients undergoing urological laparoscopic procedures 14 surgical site infections (2.5%) were identified at mean postoperative day 21.5. Of the 14 surgical site infections 10 (71.4%) were located at a specimen extraction site. Operative time, procedure type and increasing body mass index were significantly associated with the occurrence of surgical site infections (p = 0.007, p = 0.019, p = 0.038, respectively), whereas history of diabetes mellitus (p = 0.071) and intraoperative transfusion (p = 0.053) were found to trend toward significance. Age, gender, positive urine culture, steroid use, procedure type and smoking history were not significantly associated with surgical site infection. Body mass index and operative time remained significant predictors of surgical site infection on multivariate logistic regression analysis. Surgical site infection is an infrequent complication following laparoscopic surgery with the majority occurring at the specimen extraction site. Infection is associated with prolonged operative time and

  16. Effective and efficient learning in the operating theater with intraoperative video-enhanced surgical procedure training

    OpenAIRE

    van Det, M.J.; Meijerink, W.J.; Hoff, C.; Middel, B.; Pierie, J.P.

    2013-01-01

    INtraoperative Video Enhanced Surgical procedure Training (INVEST) is a new training method designed to improve the transition from basic skills training in a skills lab to procedural training in the operating theater. Traditionally, the master-apprentice model (MAM) is used for procedural training in the operating theater, but this model lacks uniformity and efficiency at the beginning of the learning curve. This study was designed to investigate the effectiveness and efficiency of INVEST co...

  17. Electrocoagulative Surgical Procedure for Treatment of Conjunctivochalasis

    Science.gov (United States)

    Zhang, Xing-Ru; Zhang, Zhen-Yong; Hoffman, Matthew R.

    2012-01-01

    The purpose of this study was to present a new procedure to treat symptomatic conjunctivochalasis (CCh) and to evaluate its efficacy. Forty-two patients with symptomatic CCh refractory to medical management were included on this study. Twenty-two patients (n  =  32, eyes; n  =  14 women and n  =  8 men) underwent the new electrocoagulation procedure (Group I). Twenty patients (n  =  27 eyes; n  =  11 women and n  =  9 men) underwent crescent-shaped conjunctiva resection (Group II). Ocular Surface Disease Index (OSDI) was used to evaluate ocular symptoms. There was a significant difference in mean and SD operation time between Group I (8.67 ± 2.07 minutes) and Group II (20.45 ± 3.98 minutes; P Electrocoagulation of the conjunctiva can successfully treat symptomatic CCh with earlier symptomatic attenuation and less operation time than traditional conjunctiva resection. PMID:23102005

  18. Distribution of isodose curves in urological surgical procedures

    International Nuclear Information System (INIS)

    Lanfredi, M.P.; Dias, J.H.; Ravazio, R.C.; Anés, M.; Bacelar, A.; Lykawka, R.

    2017-01-01

    During urological surgical procedures with fluoroscopy, the doses of the care team may be significant. However, the knowledge of the occupational exposure of these professionals is still very incipient in the national surgical centers. The objective of the study is to determine the isodose curves of the urological surgical procedures, in order to estimate the exposure of the personnel involved. The equipment used was a Arco-C BV Philips Bracelet. Patients with thicknesses of 20 and 28 cm were simulated using acrylic plates. The dose rates were measured with RaySafe i2 Unfors dosimeters positioned in a 50 x 50 cm mesh at three different heights of the floor: 95, 125 and 165 centimeters respectively corresponding to the gonadal, thoracic and crystalline regions of a typical adult . The isodose curves applied to the distribution of the surgical team suggest that the exposures are in the following descending order of intensity: primary physician, auxiliary physician, scrub nurse, anesthetist and nurse

  19. Comparison of hydrocolloid with conventional gauze dressing in prevention of wound infection after clean surgical procedures

    International Nuclear Information System (INIS)

    Khalique, M.S.; Shukr, I.; Khalique, A.B.

    2014-01-01

    To compare hydrocolloid with conventional gauze dressing in prevention of infections after clean surgical procedures. Study Design: Randomized controlled trial. Place and Duration of Study: Department of Surgery, CMH Rawalpindi from 22 Jan 2010 to 22 Aug 2010. Patients and Methods: A total of 400 patients undergoing clean surgical procedures were randomly allocated in two equal groups, A and B by lottery method. In group A. simple gauze dressing was applied after clean surgical procedures while in group B hydrocolloid dressing was used. On 7th post operative day, patients were observed for presence of infection. Results: Mean age of sample was 42.08 +-11.112 years. In group A out of 200 Patients, 14 (7.0%) while in group B 10 (5%) developed infection postoperatively (p=0.709). Conclusion: There is no difference in the rate of infection when using a gauze dressing or a hydrocolloid dressing after clean surgical procedure. (author)

  20. Frugal Design and Surgical Robotics

    OpenAIRE

    McKinley, Stephen Alan

    2016-01-01

    A new era of robotic surgery is poised to begin when critical patents held by Intuitive Surgical (IS) expire in 2016. IS market dominance for decades has led to an effective monopoly that will be challenged by several commercial enterprises working on next generation general robotic surgery systems. Robotic surgery has the potential to alleviate the skill-gap between experienced and inexperienced surgeons through the automation of sub-tasks within surgicalprocedures.The primary objective of...

  1. A Novel Surgical Template Design in Staged Dental Implant Rehabilitations

    Directory of Open Access Journals (Sweden)

    Michael Patras

    2012-05-01

    Full Text Available Background: The philosophy of a gradual transition to an implant retained prosthesis in cases of full-mouth or extensive rehabilitation usually involves a staged treatment concept. In this therapeutic approach, the placement of implants may sometimes be divided into phases. During a subsequent surgical phase of treatment, the pre-existing implants can serve as anchors for the surgical template. Those modified surgical templates help in the precise transferring of restorative information into the surgical field and guide the optimal three-dimensional implant positioning. Methods: This article highlights the rationale of implant-retained surgical templates and illustrates them through the presentation of two clinical cases. The templates are duplicates of the provisional restorations and are secured to the existing implants through the utilization of implant mounts. Results: This template design in such staged procedures provided stability in the surgical field and enhanced the accuracy in implant positioning based upon the planned restoration, thus ensuring predictable treatment outcomes.Conclusions: Successful rehabilitation lies in the correct sequence of surgical and prosthetic procedures. Whenever a staged approach of implant placement is planned, the clinician can effectively use the initially placed implants as anchors for the surgical template during the second phase of implant surgery.

  2. Design Procedure for Hybrid Ventilation

    DEFF Research Database (Denmark)

    Heiselberg, Per; Tjelflaat, Per Olaf

    Mechanical and natural ventilation systems have developed separately during many years. The natural next step in this development is development of ventilation concepts that utilises and combines the best features from each system into a new type of ventilation system - Hybrid Ventilation....... Buildings with hybrid ventilation often include other sustainable technologies and an energy optimisation requires an integrated approach in the design of the building and its mechanical systems. Therefore, the hybrid ventilation design procedure differs from the design procedure for conventional HVAC....... The first ideas on a design procedure for hybrid ventilation is presented and the different types of design methods, that is needed in different phases of the design process, is discussed....

  3. [Surgical procedures involved in claims for alleged defects in praxis].

    Science.gov (United States)

    Arimany-Manso, Josep; Benet-Travé, J; Bruguera-Cortada, M; Torné-Escasany, R; Klamburg-Pujol, J; Gómez-Durán, Esperanza L

    2014-03-01

    Medical professional liability and adverse events in health care are major concerns worldwide and the analysis of claims for alleged defects in praxis is a potential source of knowledge. High rates of adverse events and complaints have been reported in surgical procedures. This article analyzes the claims registered by the Council of Medical Colleges in Catalonia between 1986 and 2012, and explores surgical procedures claimed (ICD- 9-CM coding), as well as the final outcome of the claim. Among the 5,419 records identified on surgical procedures, the interventions of the musculoskeletal system and skin and integument showed the highest frequencies. Interventions related to "non-curative" medicine should be emphasized because of their higher rates of economical agreement or condemnation outcomes, which were significantly higher for mastopexia. The results underscore the importance of the surgical area in medical professional liability and the high risk of payouts among those procedures belonging to the so-called "non-curative" medicine. Copyright © 2014 Elsevier España, S.L. All rights reserved.

  4. Ophthalmic surgical procedures in children at the University of Benin ...

    African Journals Online (AJOL)

    The second commonest indication for surgery was cataract (23.0%), while eyeball removal (9% of cases) due to tumours or infection was the third commonest surgical procedure. Strabismus and pterygium surgery were infrequently performed (0.9%). Late presentation for eye surgery was the pattern in most of the cases.

  5. Perceived age change after aesthetic facial surgical procedures quantifying outcomes of aging face surgery.

    Science.gov (United States)

    Chauhan, Nitin; Warner, Jeremy P; Adamson, Peter A

    2012-01-01

    To quantify the degree of perceived age change after aesthetic facial surgical procedures to provide an objective measure of surgical success. Sixty patients undergoing various aging face surgical procedures were randomly chosen for analysis. Preoperative and postoperative photographs were evaluated. Raters were presented with photographs in a random assortment and were asked to estimate the age of the patient. Perceived age difference was defined as the difference between the chronological age and the estimated age, and the change in this value after surgery was the chief outcome of interest. Statistical models were designed to account for any effects of interrater differences, preoperative chronological age, rater group, photograph order, or surgical procedure performed. Our patient population was divided into the following 3 groups based on the surgical procedure performed: group 1 (face- and neck-lift [22 patients]), group 2 (face- and neck-lift and upper and lower blepharoplasty [17 patients]), and group 3 (face- and neck-lift, upper and lower blepharoplasty, and forehead-lift [21 patients]). Adjusted means demonstrated that patient ages were estimated to be 1.7 years younger than their chronological age before surgery and 8.9 years younger than their chronological age after surgery. The effect was less substantial for group 1 patients and was most dramatic for group 3 patients, who had undergone all 3 aging face surgical procedures. Our study is novel in that it quantifies the degree of perceived age change after aging face surgical procedures and demonstrates a significant and consistent reduction in perceived age after aesthetic facial surgery. This effect is more substantial when the number of surgical procedures is increased, an effect unrelated to the preoperative age of a patient and unaffected by other variables that we investigated. The ability to perceive age correctly is accurate and consistent.

  6. Characterization of aerosols produced by surgical procedures: A summary

    Energy Technology Data Exchange (ETDEWEB)

    Yeh, Hsu-Chi; Muggenburg, B.A.; Lundgren, D.L.; Turner, R.S.; Guilmette, R.A.; Snipes, M.B.; Jones, R.K.

    1994-11-01

    In many types of surgery, especially orthopedic procedures, power tools such as saws and drills are used. These tools can impart considerable energy in disrupting tissue and may produce aerosolized blood and material from bone and other tissues. Surgical lasers and electrocautery tools can also produce aerosols due to vaporization of blood and tissues. A number of studies have been reported concerning production of aerosols during surgery, and some of the aerosols produced may contain infectious materials. Health care workers have expressed concern and questions pertaining to the occupational transmission of blood-borne pathogens including the human immunodeficiency virus (HIV) and hepatitis B virus (HBV) via blood aerosols during surgery. Little or no data existed characterizing the aerosols produced performing surgical procedures. Because of this lack of data, the National Institute for Occupational Safety and Health funded a project at ITRI to assess the extent of aerosolization of blood and other tissues during surgical procedures in the laboratory and in a hospital surgical suite.

  7. Characterization of aerosols produced by surgical procedures: A summary

    International Nuclear Information System (INIS)

    Yeh, Hsu-Chi; Muggenburg, B.A.; Lundgren, D.L.; Turner, R.S.; Guilmette, R.A.; Snipes, M.B.; Jones, R.K.

    1994-01-01

    In many types of surgery, especially orthopedic procedures, power tools such as saws and drills are used. These tools can impart considerable energy in disrupting tissue and may produce aerosolized blood and material from bone and other tissues. Surgical lasers and electrocautery tools can also produce aerosols due to vaporization of blood and tissues. A number of studies have been reported concerning production of aerosols during surgery, and some of the aerosols produced may contain infectious materials. Health care workers have expressed concern and questions pertaining to the occupational transmission of blood-borne pathogens including the human immunodeficiency virus (HIV) and hepatitis B virus (HBV) via blood aerosols during surgery. Little or no data existed characterizing the aerosols produced performing surgical procedures. Because of this lack of data, the National Institute for Occupational Safety and Health funded a project at ITRI to assess the extent of aerosolization of blood and other tissues during surgical procedures in the laboratory and in a hospital surgical suite

  8. Catheter for Cleaning Surgical Optics During Surgical Procedures: A Possible Solution for Residue Buildup and Fogging in Video Surgery.

    Science.gov (United States)

    de Abreu, Igor Renato Louro Bruno; Abrão, Fernando Conrado; Silva, Alessandra Rodrigues; Corrêa, Larissa Teresa Cirera; Younes, Riad Nain

    2015-05-01

    Currently, there is a tendency to perform surgical procedures via laparoscopic or thoracoscopic access. However, even with the impressive technological advancement in surgical materials, such as improvement in quality of monitors, light sources, and optical fibers, surgeons have to face simple problems that can greatly hinder surgery by video. One is the formation of "fog" or residue buildup on the lens, causing decreased visibility. Intracavitary techniques for cleaning surgical optics and preventing fog formation have been described; however, some of these techniques employ the use of expensive and complex devices designed solely for this purpose. Moreover, these techniques allow the cleaning of surgical optics when they becomes dirty, which does not prevent the accumulation of residue in the optics. To solve this problem we have designed a device that allows cleaning the optics with no surgical stops and prevents the fogging and residue accumulation. The objective of this study is to evaluate through experimental testing the effectiveness of a simple device that prevents the accumulation of residue and fogging of optics used in surgical procedures performed through thoracoscopic or laparoscopic access. Ex-vivo experiments were performed simulating the conditions of residue presence in surgical optics during a video surgery. The experiment consists in immersing the optics and catheter set connected to the IV line with crystalloid solution in three types of materials: blood, blood plus fat solution, and 200 mL of distilled water and 1 vial of methylene blue. The optics coupled to the device were immersed in 200 mL of each type of residue, repeating each immersion 10 times for each distinct residue for both thirty and zero degrees optics, totaling 420 experiments. A success rate of 98.1% was observed after the experiments, in these cases the device was able to clean and prevent the residue accumulation in the optics.

  9. Designing Flightdeck Procedures: Literature Resources

    Science.gov (United States)

    Feldman, Jolene; Barshi, Immanuel; Degani, Asaf; Loukopoulou, Loukia; Mauro, Robert

    2017-01-01

    This technical publication contains the titles, abstracts, summaries, descriptions, and/or annotations of available literature sources on procedure design and development, requirements, and guidance. It is designed to provide users with an easy access to available resources on the topic of procedure design, and with a sense of the contents of these sources. This repository of information is organized into the following publication sources: Research (e.g., journal articles, conference proceedings), Manufacturers' (e.g., operation manuals, newsletters), and Regulatory and/or Government (e.g., advisory circulars, reports). An additional section contains synopses of Accident/Incident Reports involving procedures. This work directly supports a comprehensive memorandum by Barshi, Mauro, Degani, & Loukopoulou (2016) that summarizes the results of a multi-year project, partially funded by the FAA, to develop technical reference materials that support guidance on the process of developing cockpit procedures (see "Designing Flightdeck Procedures" https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20160013263.pdf). An extensive treatment of this topic is presented in a forthcoming book by the same authors.

  10. A medical platform for simulation of surgical procedures.

    Science.gov (United States)

    Thurfjell, L; Lundin, A; McLaughlin, J

    2001-01-01

    Surgery simulation is a promising technique for training of surgical procedures. The overall goal for any surgical simulator is to allow for efficient training of the skills required and to improve learning by giving the user proper feedback. This goal is easier achieved if the training is performed in a realistic environment. Therefore functionality such as soft tissue deformation, tearing and cutting, penetration of soft tissue etc. is necessary. Furthermore, a realistic simulator must provide haptic feedback so that all senses match, that is, there should be a correspondence between what you see and what you feel with your hands. In this paper we describe a medical platform that provides all this functionality. It is based on the Reachln Magma API, which has been extended for surgery simulation. We describe the development of the platform and illustrate the use of it for the development of two different types of surgical simulators, both of which represents work in progress.

  11. Surgical site infections in paediatric otolaryngology operative procedures.

    Science.gov (United States)

    Ifeacho, S N; Bajaj, Y; Jephson, C G; Albert, D M

    2012-07-01

    An assessment of the rate of surgical site infections associated with elective paediatric otolaryngology surgical procedures. Prospective data was collected for a 3-week period for all children undergoing surgery where either mucosa or skin was breached. The parents of the children were requested to complete a questionnaire at 30 days after the operation. Data was collected on 80 consecutive cases. The majority of cases were admitted on the day of the procedure. The procedures included adenotonsillectomy (24), grommets (12), cochlear implantation (6), bone-anchored hearing aid (2), submandibular gland excision (1), branchial sinus excision (1), cystic hygroma excision (3), nasal glioma excision (1), microlaryngobronchoscopy (13), tracheostomy (3) and other procedures (14). Nearly half the cases had more than one operation done at the same time. 26/80 (32.5%) patients had a temporary or permanent implant inserted at the time of operation (grommet, bone-anchored hearing aid, cochlear implant). 25/80 (31%) operative fields were classed as clean and 55/80 (68.7%) as clean contaminated operations. The duration of the operation varied from 6 min to 142 min. Hospital antibiotic protocol was adhered to in 69/80 (86.3%) cases but not in 11/80 cases. In our series, 3/80 (3.7%) patients had an infection in the postoperative period. Surgical site infections do occur at an appreciable rate in paediatric otolaryngology. With the potential for serious consequences, reduction in the risk of surgical site infections is important. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

  12. Percutaneous release of the plantar fascia. New surgical procedure.

    Science.gov (United States)

    Oliva, Francesco; Piccirilli, Eleonora; Tarantino, Umberto; Maffulli, Nicola

    2017-01-01

    Plantar fasciopathy presents with pain at the plantar and medial aspect of the heel. If chronic, it can negatively impact on quality of life. Plantar fasciopathy is not always self-limiting, and can be debilitating. Surgical management involves different procedures. We describe a percutaneous plantar fascia release. A minimally invasive access to the plantar tuberosity of the calcaneus is performed, and a small scalpel blade is used to release the fascia. With this procedure, skin healing problems, nerve injuries, infection and prolonged recovery time are minimised, allowing early return to normal activities. V.

  13. Crowd-sourced assessment of surgical skills in cricothyrotomy procedure.

    Science.gov (United States)

    Aghdasi, Nava; Bly, Randall; White, Lee W; Hannaford, Blake; Moe, Kris; Lendvay, Thomas S

    2015-06-15

    Objective assessment of surgical skills is resource intensive and requires valuable time of expert surgeons. The goal of this study was to assess the ability of a large group of laypersons using a crowd-sourcing tool to grade a surgical procedure (cricothyrotomy) performed on a simulator. The grading included an assessment of the entire procedure by completing an objective assessment of technical skills survey. Two groups of graders were recruited as follows: (1) Amazon Mechanical Turk users and (2) three expert surgeons from University of Washington Department of Otolaryngology. Graders were presented with a video of participants performing the procedure on the simulator and were asked to grade the video using the objective assessment of technical skills questions. Mechanical Turk users were paid $0.50 for each completed survey. It took 10 h to obtain all responses from 30 Mechanical Turk users for 26 training participants (26 videos/tasks), whereas it took 60 d for three expert surgeons to complete the same 26 tasks. The assessment of surgical performance by a group (n = 30) of laypersons matched the assessment by a group (n = 3) of expert surgeons with a good level of agreement determined by Cronbach alpha coefficient = 0.83. We found crowd sourcing was an efficient, accurate, and inexpensive method for skills assessment with a good level of agreement to experts' grading. Copyright © 2015 Elsevier Inc. All rights reserved.

  14. Meconium Ileus–Is a Single Surgical Procedure Adequate?

    Directory of Open Access Journals (Sweden)

    Hagith Nagar

    2006-07-01

    Full Text Available Meconium ileus is one of the gastrointestinal manifestations of cystic fibrosis (CF, and affects 15% of neonates. The condition results from the accumulation of sticky inspissated meconium. Both nonoperative and operative therapies may be effective in relieving obstruction. The treatment of choice for uncomplicated meconium ileus is the use of enteral N-acetylcysteine or Gastrografin enemata. Once such therapy fails, surgery is indicated. A number of operative procedures are in use, including Bishop-Koop enterostomy, T-tube irrigation, resection and primary anastomosis, and enterotomy with irrigation and primary closure. During the period 1991-2003, five newborns required surgical intervention for uncomplicated meconium ileus. None responded to conservative management. All were males, including one set of twins. All underwent laparotomy, enterotomy, appendectomy, irrigation and closure of enterotomy. None required a second surgical procedure. CF was confirmed in all, and in each case, both parents were found to be genetic carriers of a mutational form of CF. A single surgical intervention is preferable in these patients, in view of the high rate of pulmonary involvement in CF patients. Enterotomy, irrigation and primary closure are the treatment of choice for uncomplicated meconium ileus.

  15. THD Doppler procedure for hemorrhoids: the surgical technique.

    Science.gov (United States)

    Ratto, C

    2014-03-01

    Transanal hemorrhoidal dearterialization (THD) is an effective treatment for hemorrhoidal disease. The ligation of hemorrhoidal arteries (called "dearterialization") can provide a significant reduction of the arterial overflow to the hemorrhoidal piles. Plication of the redundant rectal mucosa/submucosa (called "mucopexy") can provide a repositioning of prolapsing tissue to the anatomical site. In this paper, the surgical technique and perioperative patient management are illustrated. Following adequate clinical assessment, patients undergo THD under general or spinal anesthesia, in either the lithotomy or the prone position. In all patients, distal Doppler-guided dearterialization is performed, providing the selective ligation of hemorrhoidal arteries identified by Doppler. In patients with hemorrhoidal/muco-hemorrhoidal prolapse, the mucopexy is performed with a continuous suture including the redundant and prolapsing mucosa and submucosa. The description of the surgical procedure is complemented by an accompanying video (see supplementary material). In long-term follow-up, there is resolution of symptoms in the vast majority of patients. The most common complication is transient tenesmus, which sometimes can result in rectal discomfort or pain. Rectal bleeding occurs in a very limited number of patients. Neither fecal incontinence nor chronic pain should occur. Anorectal physiology parameters should be unaltered, and anal sphincters should not be injured by following this procedure. When accurately performed and for the correct indications, THD is a safe procedure and one of the most effective treatments for hemorrhoidal disease.

  16. Estimating anesthesia and surgical procedure times from medicare anesthesia claims.

    Science.gov (United States)

    Silber, Jeffrey H; Rosenbaum, Paul R; Zhang, Xuemei; Even-Shoshan, Orit

    2007-02-01

    Procedure times are important variables that often are included in studies of quality and efficiency. However, due to the need for costly chart review, most studies are limited to single-institution analyses. In this article, the authors describe how well the anesthesia claim from Medicare can estimate chart times. The authors abstracted information on time of induction and entrance to the recovery room ("anesthesia chart time") from the charts of 1,931 patients who underwent general and orthopedic surgical procedures in Pennsylvania. The authors then merged the associated bills from claims data supplied from Medicare (Part B data) that included a variable denoting the time in minutes for the anesthesia service. The authors also investigated the time from incision to closure ("surgical chart time") on a subset of 1,888 patients. Anesthesia claim time from Medicare was highly predictive of anesthesia chart time (Kendall's rank correlation tau = 0.85, P < 0.0001, median absolute error = 5.1 min) but somewhat less predictive of surgical chart time (Kendall's tau = 0.73, P < 0.0001, median absolute error = 13.8 min). When predicting chart time from Medicare bills, variables reflecting procedure type, comorbidities, and hospital type did not significantly improve the prediction, suggesting that errors in predicting the chart time from the anesthesia bill time are not related to these factors; however, the individual hospital did have some influence on these estimates. Anesthesia chart time can be well estimated using Medicare claims, thereby facilitating studies with vastly larger sample sizes and much lower costs of data collection.

  17. Nitrousoxide as a conscious sedative in minor oral surgical procedure.

    Science.gov (United States)

    Mohan, Rakesh; Asir, Vigil Dev; Shanmugapriyan; Ebenezr, Vijay; Dakir, Abu; Balakrishnan; Jacob, Jeffin

    2015-04-01

    Nitrous oxide (N2O) is the most commonly used inhalation anesthetic in dentistry and is commonly used in emergency centers and ambulatory surgery centers as well. When used alone, it is incapable of producing general anesthesia reliably. However, as a single agent, it has an impressive safety and is excellent for providing minimal and moderate sedation for apprehensive minor oral surgical procedure. In this article, action of N2O in overcoming the anxiety and pain of the patient during the minor oral surgery and its advantages and disadvantages, have been reviewed.

  18. Nitrousoxide as a conscious sedative in minor oral surgical procedure

    Directory of Open Access Journals (Sweden)

    Rakesh Mohan

    2015-01-01

    Full Text Available Nitrous oxide (N 2 O is the most commonly used inhalation anesthetic in dentistry and is commonly used in emergency centers and ambulatory surgery centers as well. When used alone, it is incapable of producing general anesthesia reliably. However, as a single agent, it has an impressive safety and is excellent for providing minimal and moderate sedation for apprehensive minor oral surgical procedure. In this article, action of N 2 O in overcoming the anxiety and pain of the patient during the minor oral surgery and its advantages and disadvantages, have been reviewed.

  19. Are minimally invasive procedures harder to acquire than conventional surgical procedures?

    Science.gov (United States)

    Hiemstra, Ellen; Kolkman, Wendela; le Cessie, Saskia; Jansen, Frank Willem

    2011-01-01

    It is frequently suggested that minimally invasive surgery (MIS) is harder to acquire than conventional surgery. To test this hypothesis, residents' learning curves of both surgical skills are compared. Residents had to be assessed using a general global rating scale of the OSATS (Objective Structured Assessment of Technical Skills) for every procedure they performed as primary surgeon during a 3-month clinical rotation in gynecological surgery. Nine postgraduate-year-4 residents collected a total of 319 OSATS during the 2 years and 3 months investigation period. These assessments concerned 129 MIS (laparoscopic and hysteroscopic) and 190 conventional (open abdominal and vaginal) procedures. Learning curves (in this study defined as OSATS score plotted against procedure-specific caseload) for MIS and conventional surgery were compared using a linear mixed model. The MIS curve revealed to be steeper than the conventional curve (1.77 vs. 0.75 OSATS points per assessed procedure; 95% CI 1.19-2.35 vs. 0.15-1.35, p < 0.01). Basic MIS procedures do not seem harder to acquire during residency than conventional surgical procedures. This may have resulted from the incorporation of structured MIS training programs in residency. Hopefully, this will lead to a more successful implementation of the advanced MIS procedures. Copyright © 2010 S. Karger AG, Basel.

  20. Effects of Frequent Glove Change on Outcomes of Orthopaedic Surgical Procedures - A Multicenter Study on Surgical Gloves

    Directory of Open Access Journals (Sweden)

    Nishit Palo

    2017-10-01

    Full Text Available Introduction: Intact surgical gloves are a barrier to microorganisms migration between surgical team members and the patient. The surgical gloves are changed at various junctures but the effects of changing gloves during surgical procedures on various surgical parameters or clinical outcomes are not established. Aim: To determine rationale of glove change during orthopaedic procedures, differences amongst surgical parameters with and without changing the surgical gloves and whether frequent glove change affected surgical parameters or clinical outcomes. Materials and Methods: A prospective multicenter study conducted at three centers from January 2014 to January 2016. A 250 patients were divided into 2 groups (n=125 each in Group 1, surgical team operated with regular changing of gloves. In Group 2, only 1 set of double gloves were worn throughout the procedure. Surgical parameters or clinical outcomes were assessed for both the groups. Statistical analyses included the median, mode, range, Interquartile Range (IQR and sample standard deviation (s and independent-samples t-test. Bacterial counts were expressed as median with (IQR. Results: Surgical Timing Difference was 10 (S.D.- 4.2 minutes more in Group-1 (<0.05, Surgical Cost was higher in Group-1 by Rs.150-450 (<0.05. Outer glove micro-perforation rate was 5.85% and 8.15% in group-1 and 2 respectively with no inner glove perforation or Surgical Site Infections. Outer glove micro perforations were proportional to duration of surgery; operations lasting 120-210 and 61-120 minutes had 66.6% and 37.2% micro perforation rates respectively (p<0.05. Conclusion: Under standard operating conditions, procedures performed without glove change are shorter and cost effective than procedures performed with regular glove change with similar surgical and functional results. Judicious use of surgical gloves is a patient and environment friendly option, thereby reducing the hospital’s biomedical waste load.

  1. Surgical procedures in esophagus cancer treatment. Our experience

    International Nuclear Information System (INIS)

    Villena, Freddy; Carrasco, Edgar

    2005-01-01

    Esophagus cancer represents a very lethal neoplasm. Esophageal resection is going to be the therapeutic alternative to patients considered surgical candidates. It had been described some esophagus resection procedure. Although, there is not any agreement between surgeon about which are best procedure to patients with esophagus carcinoma. Most of patients who came advanced phase have poor prognostic and only patients, who have illness in early stage, exist expectative to improve survival with lymphadenectomy extended and neoadjuvant. We analyzes retrospectively files of 23 patients submitted to esophagectomy in hospital Solca Quito from 1985 to 2004 with the diagnostic of esophagus carcinoma, considering histology type, location, surgical proceeded, pathologic staging, surgical mortally, mobility and survival time live. Also it makes a review about proceeds of esophagus resection and adjuvant therapy to the esophagus cancer. Conclusions: Esophagectomy transhiatal has limitations in oncological resection and recommend it early lower esophagus lesions and cardiac orifice (dysplasia high grade, T is, TI, NO, MO) in patients of high risk. Right trans thoracic esophagectomy it is considered in all lesions advanced locally lower middle third, and cardias orifice with lymphadenectomy of two areas and have avoid of trans thoracic anastomotic risk. Trans operatively margins upper have been 10 cm and 5 cm distal, always freeze those margins trans operatively. Extended lymphadenectomy to three areas we have no order yet conclusive dates and the chemotherapy neoadjuvant had been a positive impact in the survival in those chemosensitive tumors with appropriate answer and could be totally remove, but randomized testing future could determine his efficacy real. (The author)

  2. Guidelines on the facilities required for minor surgical procedures and minimal access interventions.

    LENUS (Irish Health Repository)

    Humphreys, H

    2012-02-01

    There have been many changes in healthcare provision in recent years, including the delivery of some surgical services in primary care or in day surgery centres, which were previously provided by acute hospitals. Developments in the fields of interventional radiology and cardiology have further expanded the range and complexity of procedures undertaken in these settings. In the face of these changes there is a need to define from an infection prevention and control perspective the basic physical requirements for facilities in which such surgical procedures may be carried out. Under the auspices of the Healthcare Infection Society, we have developed the following recommendations for those designing new facilities or upgrading existing facilities. These draw upon best practice, available evidence, other guidelines where appropriate, and expert consensus to provide sensible and feasible advice. An attempt is also made to define minimal access interventions and minor surgical procedures. For minimal access interventions, including interventional radiology, new facilities should be mechanically ventilated to achieve 15 air changes per hour but natural ventilation is satisfactory for minor procedures. All procedures should involve a checklist and operators should be appropriately trained. There is also a need for prospective surveillance to accurately determine the post-procedure infection rate. Finally, there is a requirement for appropriate applied research to develop the evidence base required to support subsequent iterations of this guidance.

  3. Retinal complications after aqueous shunt surgical procedures for glaucoma.

    Science.gov (United States)

    Law, S K; Kalenak, J W; Connor, T B; Pulido, J S; Han, D P; Mieler, W F

    1996-12-01

    To assess retinal complications and to identify risk factors for retinal complications following aqueous shunt procedures. Records of 38 consecutive aqueous shunt procedures that were performed on 36 patients at the Eye Institute of the Medical College of Wisconsin, Milwaukee, from June 1993 to March 1995 (minimum follow-up, 6 months) were reviewed. The mean +/- SD follow-up was 11.4 +/- 5.2 months (median, 10.5 months). Twelve patients (32%) had the following retinal complications: 4 serous choroidal effusions (10%) that required drainage, 3 suprachoroidal hemorrhages (8%), 2 vitreous hemorrhages (5%), 1 rhegmatogenous retinal detachment (3%), 1 endophthalmitis (3%), and 1 scleral buckling extrusion (3%). Surgical procedures for retinal complications were required in 8 (67%) of these 12 patients. Visual acuity decreased 2 lines or more in 9 (75%) of these 12 patients. The median onset of a postoperative retinal complication was 12.5 days, with 10 patients (83%) experiencing complications within 35 days. Serous choroidal effusions developed in 10 other patients (26%), and these effusions resolved spontaneously. Visual acuity decreased 2 lines or more in 2 (20%) of these additional 10 patients. Patients who experienced serious retinal complications were significantly older, had a higher rate of hypertension, and postoperative ocular hypotony. Serious retinal complications were distributed evenly among patients with Krupin valves with discs and Molteno and Baerveldt devices. Experience with the Ahmed glaucoma valve implant was limited. Aqueous shunt procedures may be associated with significant retinal complications and subsequent visual loss.

  4. Marijuana use and mortality following orthopedic surgical procedures.

    Science.gov (United States)

    Moon, Andrew S; Smith, Walter; Mullen, Sawyer; Ponce, Brent A; McGwin, Gerald; Shah, Ashish; Naranje, Sameer M

    2018-03-20

    The association between marijuana use and surgical procedures is a matter of increasing societal relevance that has not been well studied in the literature. The primary aim of this study is to evaluate the relationship between marijuana use and in-hospital mortality, as well as to assess associated comorbidities in patients undergoing commonly billed orthopedic surgeries. The National Inpatient Sample (NIS) database from 2010 to 2014 was used to determine the odds ratios for the associations between marijuana use and in-hospital mortality, heart failure (HF), stroke, and cardiac disease (CD) in patients undergoing five common orthopedic procedures: hip (THA), knee (TKA), and shoulder arthroplasty (TSA), spinal fusion, and traumatic femur fracture fixation. Of 9,561,963 patients who underwent one of the five selected procedures in the four-year period, 26,416 (0.28%) were identified with a diagnosis of marijuana use disorder. In hip and knee arthroplasty patients, marijuana use was associated with decreased odds of mortality compared to no marijuana use (pmarijuana use (0.70%), which was associated with decreased odds of mortality (p = 0.0483), HF (p = 0.0076), and CD (p = 0.0003). For spinal fusions, marijuana use was associated with increased odds of stroke (pMarijuana use in patients undergoing shoulder arthroplasty was associated with decreased odds of mortality (pmarijuana use was associated with decreased mortality in patients undergoing THA, TKA, TSA and traumatic femur fixation, although the significance of these findings remains unclear. More research is needed to provide insight into these associations in a growing surgical population.

  5. The role of appendectomy in surgical procedures for ovarian cancer.

    Science.gov (United States)

    Fontanelli, R; Paladini, D; Raspagliesi, F; di Re, E

    1992-07-01

    To assess the role of appendectomy in the surgical procedures for ovarian cancer, we evaluated retrospectively the clinical charts of 435 patients who underwent surgery after diagnosis of ovarian cancer. The appendix was removed in 160 cases and pathological examination revealed 37 with metastatic implants (23%). All the patients with appendiceal metastases showed advanced disease (stages III-IV) with an incidence of 43%. Ninety-one percent (31/34) of the tumors with appendiceal involvement at the staging operation were of the serous cell type and grade II or III. No case with early stage, right ovary carcinoma showed appendiceal metastatic foci, denying the existence of a preferential lymphatic pathway. Microscopic involvement was found only in 4 patients with advanced disease (11.7%). No intra- or postoperative complication directly related to the appendectomy was recorded. We conclude, with these results, that appendectomy should be part of the cytoreductive operation for ovarian cancer.

  6. Surgical procedures performed in the neonatal intensive care unit on critically ill neonates: feasibility and safety

    International Nuclear Information System (INIS)

    Mallick, M.S.; Jado, A.M.; Al-Bassam, A.R.

    2008-01-01

    Transferring unstable, ill neonates to and from the operating rooms carries significant risks and can lead to morbidity. We report on our experience in performing certain procedures in critically ill neonates in the neonatal intensive care unit (NICU). We examined the feasibility and safety for such an approach. All surgical procedures performed in the NICU between January 1999 and December 2005 were analyzed in terms of demographic data, diagnosis, preoperative stability of the patient, procedures performed, complications and outcome. Operations were performed at beside in the NICU in critically ill, unstable neonates who needed emergency surgery, in neonates of low birth weight (<1000 gm) and in neonates on special equipments like higher frequency ventilators and nitrous oxide. Thirty-seven surgical procedures were performed including 12 laparotomies, bowel resection and stomies, 7 repairs of congenital diaphragmatic hernias, 4 ligations of patent ductus arteriosus and various others. Birth weights ranged between 850 gm and 3500 gm (mean 2000 gm). Gestational age ranged between 25 to 42 weeks (mean, 33 weeks). Age at surgery was between 1 to 30 days (mean, 30 days). Preoperatively, 19 patients (51.3%) were on inotropic support and all were intubated and mechanically ventilated. There was no mortality related to surgical procedures. Postoperatively, one patient developed wound infection and disruption. Performing major surgical procedures in the NICU is both feasible and safe. It is useful in very low birth weight, critically ill neonates who have definite risk attached to transfer to the operating room. No special area is needed in the NICU to perform complication-free surgery, but designing an operating room within the NICU will be ideal. (author)

  7. Adaptation and innovation: a grounded theory study of procedural variation in the academic surgical workplace.

    Science.gov (United States)

    Apramian, Tavis; Watling, Christopher; Lingard, Lorelei; Cristancho, Sayra

    2015-10-01

    Surgical research struggles to describe the relationship between procedural variations in daily practice and traditional conceptualizations of evidence. The problem has resisted simple solutions, in part, because we lack a solid understanding of how surgeons conceptualize and interact around variation, adaptation, innovation, and evidence in daily practice. This grounded theory study aims to describe the social processes that influence how procedural variation is conceptualized in the surgical workplace. Using the constructivist grounded theory methodology, semi-structured interviews with surgeons (n = 19) from four North American academic centres were collected and analysed. Purposive sampling targeted surgeons with experiential knowledge of the role of variations in the workplace. Theoretical sampling was conducted until a theoretical framework representing key processes was conceptually saturated. Surgical procedural variation was influenced by three key processes. Seeking improvement was shaped by having unsolved procedural problems, adapting in the moment, and pursuing personal opportunities. Orienting self and others to variations consisted of sharing stories of variations with others, taking stock of how a variation promoted personal interests, and placing trust in peers. Acting under cultural and material conditions was characterized by being wary, positioning personal image, showing the logic of a variation, and making use of academic resources to do so. Our findings include social processes that influence how adaptations are incubated in surgical practice and mature into innovations. This study offers a language for conceptualizing the sociocultural influences on procedural variations in surgery. Interventions to change how surgeons interact with variations on a day-to-day basis should consider these social processes in their design. © 2015 John Wiley & Sons, Ltd.

  8. Surgeon and type of anesthesia predict variability in surgical procedure times.

    Science.gov (United States)

    Strum, D P; Sampson, A R; May, J H; Vargas, L G

    2000-05-01

    Variability in surgical procedure times increases the cost of healthcare delivery by increasing both the underutilization and overutilization of expensive surgical resources. To reduce variability in surgical procedure times, we must identify and study its sources. Our data set consisted of all surgeries performed over a 7-yr period at a large teaching hospital, resulting in 46,322 surgical cases. To study factors associated with variability in surgical procedure times, data mining techniques were used to segment and focus the data so that the analyses would be both technically and intellectually feasible. The data were subdivided into 40 representative segments of manageable size and variability based on headers adopted from the common procedural terminology classification. Each data segment was then analyzed using a main-effects linear model to identify and quantify specific sources of variability in surgical procedure times. The single most important source of variability in surgical procedure times was surgeon effect. Type of anesthesia, age, gender, and American Society of Anesthesiologists risk class were additional sources of variability. Intrinsic case-specific variability, unexplained by any of the preceding factors, was found to be highest for shorter surgeries relative to longer procedures. Variability in procedure times among surgeons was a multiplicative function (proportionate to time) of surgical time and total procedure time, such that as procedure times increased, variability in surgeons' surgical time increased proportionately. Surgeon-specific variability should be considered when building scheduling heuristics for longer surgeries. Results concerning variability in surgical procedure times due to factors such as type of anesthesia, age, gender, and American Society of Anesthesiologists risk class may be extrapolated to scheduling in other institutions, although specifics on individual surgeons may not. This research identifies factors associated

  9. Effective and efficient learning in the operating theater with intraoperative video-enhanced surgical procedure training.

    Science.gov (United States)

    van Det, M J; Meijerink, W J H J; Hoff, C; Middel, B; Pierie, J P E N

    2013-08-01

    INtraoperative Video Enhanced Surgical procedure Training (INVEST) is a new training method designed to improve the transition from basic skills training in a skills lab to procedural training in the operating theater. Traditionally, the master-apprentice model (MAM) is used for procedural training in the operating theater, but this model lacks uniformity and efficiency at the beginning of the learning curve. This study was designed to investigate the effectiveness and efficiency of INVEST compared to MAM. Ten surgical residents with no laparoscopic experience were recruited for a laparoscopic cholecystectomy training curriculum either by the MAM or with INVEST. After a uniform course in basic laparoscopic skills, each trainee performed six cholecystectomies that were digitally recorded. For 14 steps of the procedure, an observer who was blinded for the type of training determined whether the step was performed entirely by the trainee (2 points), partially by the trainee (1 point), or by the supervisor (0 points). Time measurements revealed the total procedure time and the amount of effective procedure time during which the trainee acted as the operating surgeon. Results were compared between both groups. Trainees in the INVEST group were awarded statistically significant more points (115.8 vs. 70.2; p < 0.001) and performed more steps without the interference of the supervisor (46.6 vs. 18.8; p < 0.001). Total procedure time was not lengthened by INVEST, and the part performed by trainees was significantly larger (69.9 vs. 54.1 %; p = 0.004). INVEST enhances effectiveness and training efficiency for procedural training inside the operating theater without compromising operating theater time efficiency.

  10. Soft Tissue Surgical Procedures for Optimizing Anterior Implant Esthetics

    Science.gov (United States)

    Ioannou, Andreas L.; Kotsakis, Georgios A.; McHale, Michelle G.; Lareau, Donald E.; Hinrichs, James E.; Romanos, Georgios E.

    2015-01-01

    Implant dentistry has been established as a predictable treatment with excellent clinical success to replace missing or nonrestorable teeth. A successful esthetic implant reconstruction is predicated on two fundamental components: the reproduction of the natural tooth characteristics on the implant crown and the establishment of soft tissue housing that will simulate a healthy periodontium. In order for an implant to optimally rehabilitate esthetics, the peri-implant soft tissues must be preserved and/or augmented by means of periodontal surgical procedures. Clinicians who practice implant dentistry should strive to achieve an esthetically successful outcome beyond just osseointegration. Knowledge of a variety of available techniques and proper treatment planning enables the clinician to meet the ever-increasing esthetic demands as requested by patients. The purpose of this paper is to enhance the implant surgeon's rationale and techniques beyond that of simply placing a functional restoration in an edentulous site to a level whereby an implant-supported restoration is placed in reconstructed soft tissue, so the site is indiscernible from a natural tooth. PMID:26124837

  11. Surgical Splint Design Influences Transverse Expansion in Segmental Maxillary Osteotomies

    DEFF Research Database (Denmark)

    Stokbro, Kasper; Aagaard, Esben; Torkov, Peter

    2017-01-01

    splint designs on achieving the planned transverse expansion in bimaxillary surgery with segmental maxillary procedures. Materials and Methods: Forty-two participants were included in a retrospective observational study. All participants had completed virtually planned bimaxillary surgery with 3-piece......Purpose: In segmental maxillary procedures, it is imperative to obtain as much of the planned expansion as possible. Lack of obtained expansion, in addition to late relapse after splint removal, can result in relapse of the posterior crossbite. This study investigated the influence of 2 surgical...... maxillary segmentation. The primary outcome variable was the transverse expansion obtained, measured as the expansion between the maxillary first molars on preoperative and postoperative cone-beam computed tomograms. The postoperative scan was performed 1 week after surgery with the splint still in place...

  12. Intraocular robotic interventional surgical system (IRISS): Mechanical design, evaluation, and master-slave manipulation.

    Science.gov (United States)

    Wilson, Jason T; Gerber, Matthew J; Prince, Stephen W; Chen, Cheng-Wei; Schwartz, Steven D; Hubschman, Jean-Pierre; Tsao, Tsu-Chin

    2018-02-01

    Since the advent of robotic-assisted surgery, the value of using robotic systems to assist in surgical procedures has been repeatedly demonstrated. However, existing technologies are unable to perform complete, multi-step procedures from start to finish. Many intraocular surgical steps continue to be manually performed. An intraocular robotic interventional surgical system (IRISS) capable of performing various intraocular surgical procedures was designed, fabricated, and evaluated. Methods were developed to evaluate the performance of the remote centers of motion (RCMs) using a stereo-camera setup and to assess the accuracy and precision of positioning the tool tip using an optical coherence tomography (OCT) system. The IRISS can simultaneously manipulate multiple surgical instruments, change between mounted tools using an onboard tool-change mechanism, and visualize the otherwise invisible RCMs to facilitate alignment of the RCM to the surgical incision. The accuracy of positioning the tool tip was measured to be 0.205±0.003 mm. The IRISS was evaluated by trained surgeons in a remote surgical theatre using post-mortem pig eyes and shown to be effective in completing many key steps in a variety of intraocular surgical procedures as well as being capable of performing an entire cataract extraction from start to finish. The IRISS represents a necessary step towards fully automated intraocular surgery and demonstrated accurate and precise master-slave manipulation for cataract removal and-through visual feedback-retinal vein cannulation. Copyright © 2017 John Wiley & Sons, Ltd.

  13. Implementation procedures for design certification

    International Nuclear Information System (INIS)

    Ritterbusch, S. E.; Brinkman, C. B.; Crump, M. W.

    1995-01-01

    The desire for safer plants arose primarily as the result of the Three Mile Island accident and the realization that plant safety could be impacted by complex plant systems interactions that are not easily identified through the traditional 'system-by-system' design process. Hence, it became apparent that the ALWR designs would have to be addressed through plant-wide Probabilistic Safety Assessments (PSAs) that addressed both accident-prevention and accident-mitigation design features. Prior to Design Certification the 'two-step' licensing process in the United States was not efficient. Utilities had to commit large amounts of capital to plant construction without confidence that an operating license would be issued when construction permit was issued often required design changes that resulted in significant construction delays. The 55 utilities operating nuclear plants in the U. S. each had their own design and operating preferences, resulting in many customized plants with a minimum of economic benefit from standardization. This was addressed by the U. S. Nuclear Regulatory Commission (NRC) in a new regulation (Title 10 of the Code of Federal Regulations, Part 52 or '10 CFR 52') which provides certification of a design that can later be referenced by an applicant for a Combined Operating License (COL). Identifying an ALWR solution for previously unanalyzed severe accident scenarios appeared difficult, at best, since severe accident research had to be performed and since there was no regulatory precedent. This meant that complex technical issues and licensing review policies had to be developed without the benefit of licensing standards or experience. As a result, a system of iterative interactions between the regulator and the industry was established, wherein a design or safety requirement would be proposed, then discussed along with development of the corresponding design feature, and finally revised and documented via NRC 'guidance'

  14. Doctors’ perspectives of informed consent for non-emergency surgical procedures: a qualitative interview study

    OpenAIRE

    Wood, Fiona; Martin, Sean Michael; Carson-Stevens, Andrew; Elwyn, Glyn; Precious, Elizabeth; Kinnersley, Paul Richard

    2016-01-01

    Background\\ud The need to involve patients more in decisions about their care, the ethical imperative and concerns about ligation and complaints has highlighted the issue of informed consent and how it is obtained. In order for a patient to make an informed decision about their treatment, they need appropriate discussion of the risks and benefits of the treatment.\\ud \\ud Objectives\\ud To explore doctors’ perspectives of gaining informed consent for routine surgical procedures.\\ud \\ud Design\\u...

  15. Three-dimensional computer graphics for surgical procedure learning: Web three-dimensional application for cleft lip repair.

    Science.gov (United States)

    Kobayashi, Masahiro; Nakajima, Tatsuo; Mori, Ayako; Tanaka, Daigo; Fujino, Toyomi; Chiyokura, Hiroaki

    2006-05-01

    In surgical procedures for cleft lip, surgeons attempt to use various skin incisions and small flaps to achieve a better and more natural shape postoperatively. They must understand the three-dimensional (3D) structure of the lips. However, they may have difficulty learning the surgical procedures precisely from normal textbooks with two-dimensional illustrations. Recent developments in 3D computed tomography (3D-CT) and laser stereolithography have enabled surgeons to visualize the structures of cleft lips from desired viewpoints. However, this method cannot reflect the advantages offered by specific surgical procedures. To solve this problem, we used the benefits offered by 3D computer graphics (3D-CG) and 3D animation. By using scanning 3D-CT image data of patients with cleft lips, 3D-CG models of the cleft lips were created. Several animations for surgical procedures such as incision designs, rotation of small skin flaps, and sutures were made. This system can recognize the details of an operation procedure clearly from any viewpoint, which cannot be acquired from the usual textbook illustrations. This animation system can be used for developing new skin-flap design, understanding the operational procedure, and using tools in case presentations. The 3D animations can also be uploaded to the World Wide Web for use in teleconferencing.

  16. Listening Comprehension: Approach, Design, Procedure.

    Science.gov (United States)

    Richards, Jack C.

    1983-01-01

    Three dimensions in the teaching of listening comprehension are outlined: (1) a theory is presented that takes account of the cognitive processes used (approach); (2) listeners' needs are analyzed and a taxonomy of microskills and objectives for teaching them are proposed (design); and (3) classroom exercises and activities are suggested…

  17. Surgical and procedural skills training at medical school - a national review.

    Science.gov (United States)

    Davis, Christopher R; Toll, Edward C; Bates, Anthony S; Cole, Matthew D; Smith, Frank C T

    2014-01-01

    This national study quantifies procedural and surgical skills training at medical schools in the United Kingdom (UK), a stipulated requirement of all graduates by the General Medical Council (GMC). A questionnaire recorded basic procedural and surgical skills training provided by medical schools and surgical societies in the UK. Skills were extracted from (1) GMC Tomorrows Doctors and (2) The Royal College of Surgeons Intercollegiate Basic Surgical Skills (BSS) course. Data from medical school curricula and extra-curricular student surgical societies were compared against the national GMC guidelines and BSS course content. Data were analysed using Mann-Whitney U tests. Representatives from 23 medical schools completed the survey (71.9% response). Thirty one skills extracted from the BSS course were split into 5 categories, with skills content cross referenced against GMC documentation. Training of surgical skills by medical schools was as follows: Gowning and gloving (72.8%), handling instruments (29.4%), knot tying (17.4%), suturing (24.7%), other surgical techniques (4.3%). Surgical societies provided significantly more training of knot tying (64.4%, P = 0.0013) and suturing (64.5%, P = 0.0325) than medical schools. Medical schools provide minimal basic surgical skills training, partially supplemented by extracurricular student surgical societies. Our findings suggest senior medical students do not possess simple surgical and procedural skills. Newly qualified doctors are at risk of being unable to safely perform practical procedures, contradicting GMC Guidelines. We propose a National Undergraduate Curriculum in Surgery and Surgical Skills to equip newly qualified doctors with basic procedural skills to maximise patient safety. Copyright © 2014 Surgical Associates Ltd. Published by Elsevier Ltd. All rights reserved.

  18. Hybrid procedure for total laryngectomy with a flexible robot-assisted surgical system.

    Science.gov (United States)

    Schuler, Patrick J; Hoffmann, Thomas K; Veit, Johannes A; Rotter, Nicole; Friedrich, Daniel T; Greve, Jens; Scheithauer, Marc O

    2017-06-01

    Total laryngectomy is a standard procedure in head-and-neck surgery for the treatment of cancer patients. Recent clinical experiences have indicated a clinical benefit for patients undergoing transoral robot-assisted total laryngectomy (TORS-TL) with commercially available systems. Here, a new hybrid procedure for total laryngectomy is presented. TORS-TL was performed in human cadavers (n = 3) using a transoral-transcervical hybrid procedure. The transoral approach was performed with a robotic flexible robot-assisted surgical system (Flex®) and compatible flexible instruments. Transoral access and visualization of anatomical landmarks were studied in detail. Total laryngectomy is feasible with a combined transoral-transcervical approach using the flexible robot-assisted surgical system. Transoral visualization of all anatomical structures is sufficient. The flexible design of the robot is advantageous for transoral surgery of the laryngeal structures. Transoral robot assisted surgery has the potential to reduce morbidity, hospital time and fistula rates in a selected group of patients. Initial clinical studies and further development of supplemental tools are in progress. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  19. The first successful laparoscopic Whipple procedure at Hat Yai Hospital: surgical technique and a case report.

    Science.gov (United States)

    Khaimook, Araya; Borkird, Jumpot; Alapach, Sakda

    2010-09-01

    Whipple procedure is the most complex abdominal surgical procedure to treat periampullary carcinoma. With the benefit of minimally invasive approach, many institutes attempt to do Whipple procedure laparoscopically. However, only 146 cases of laparoscopic Whipple procedure have yet been reported in the literature worldwide between 1994 and 2008. The authors reported the first laparoscopic Whipple procedure at Hat Yai Hospital in December 2009. The patient was a 40-year-old, Thai-Muslim female, with the diagnosis of ampullary carcinoma. The operating time was 685 minutes. The patient was discharged on postoperative day 14 without serious complication. The surgical technique and postoperative progress of the patient were described.

  20. Safety of the surgeon: 'Double-gloving' during surgical procedures

    African Journals Online (AJOL)

    during exposure to blood and body fluids are now mandatory. Intact surgical gloves can ... HIV/AIDS infection is for the surgeon to 'double-glove' – wear two standard gloves on .... sharp fractured bones or bony structures.[12,16,17] The rate of ...

  1. Phenomenological Research Method, Design and Procedure: A ...

    African Journals Online (AJOL)

    Phenomenological Research Method, Design and Procedure: A Phenomenological Investigation of the Phenomenon of Being-in-Community as Experienced by Two Individuals Who Have Participated in a Community Building Workshop.

  2. THD Doppler procedure for hemorrhoids: the surgical technique

    OpenAIRE

    Ratto, C.

    2013-01-01

    Transanal hemorrhoidal dearterialization (THD) is an effective treatment for hemorrhoidal disease. The ligation of hemorrhoidal arteries (called “dearterialization”) can provide a significant reduction of the arterial overflow to the hemorrhoidal piles. Plication of the redundant rectal mucosa/submucosa (called “mucopexy”) can provide a repositioning of prolapsing tissue to the anatomical site. In this paper, the surgical technique and perioperative patient management are illustrated. Followi...

  3. Novel surgical procedures in glaucoma: advances in penetrating glaucoma surgery.

    Science.gov (United States)

    Filippopoulos, Theodoros; Rhee, Douglas J

    2008-03-01

    Despite late modifications and enhancements, traditional penetrating glaucoma surgery is not without complications and is reserved for patients in whom pharmacologic treatment and/or laser trabeculoplasty do not suffice to control the intraocular pressure. This article critically reviews recent advances in penetrating glaucoma surgery with particular attention paid to two novel surgical approaches: ab interno trabeculectomy with the Trabectome and implantation of the Ex-PRESS shunt. Ab interno trabeculectomy (Trabectome) achieves a sustained 30% reduction in intraocular pressure by focally ablating and cauterizing the trabecular meshwork/inner wall of Schlemm's canal. It has a remarkable safety profile with respect to early hypotonous or infectious complications as it does not generate a bleb, but it can be associated with early postoperative intraocular pressure spikes that may necessitate additional glaucoma surgery. The Ex-PRESS shunt is more commonly implanted under a partial thickness scleral flap, and appears to have similar efficacy to standard trabeculectomy offering some advantages with respect to the rate of early complications related to hypotony. Penetrating glaucoma surgery will continue to evolve. As prospective randomized clinical trials become available, we will determine the exact role of these surgical techniques in the glaucoma surgical armamentarium.

  4. Chronic subdural hematoma : a systematic review and meta-analysis of surgical procedures

    NARCIS (Netherlands)

    Liu, Weiming; Bakker, Nicolaas A.; Groen, Rob J. M.

    Object. In this paper the authors systematically evaluate the results of different surgical procedures for chronic subdural hematoma (CSDH). Methods. The MEDLINE, Embase, Cochrane Central Register of Controlled Trials, and other databases were scrutinized according to the PRISMA (Preferred Reporting

  5. Knowing the operative game plan: a novel tool for the assessment of surgical procedural knowledge.

    Science.gov (United States)

    Balayla, Jacques; Bergman, Simon; Ghitulescu, Gabriela; Feldman, Liane S; Fraser, Shannon A

    2012-08-01

    What is the source of inadequate performance in the operating room? Is it a lack of technical skills, poor judgment or a lack of procedural knowledge? We created a surgical procedural knowledge (SPK) assessment tool and evaluated its use. We interviewed medical students, residents and training program staff on SPK assessment tools developed for 3 different common general surgery procedures: inguinal hernia repair with mesh in men, laparoscopic cholecystectomy and right hemicolectomy. The tools were developed as a step-wise assessment of specific surgical procedures based on techniques described in a current surgical text. We compared novice (medical student to postgraduate year [PGY]-2) and expert group (PGY-3 to program staff) scores using the Mann-Whitney U test. We calculated the total SPK score and defined a cut-off score using receiver operating characteristic analysis. In all, 5 participants in 7 different training groups (n = 35) underwent an interview. Median scores for each procedure and overall SPK scores increased with experience. The median SPK for novices was 54.9 (95% confidence interval [CI] 21.6-58.8) compared with 98.05 (95% CP 94.1-100.0) for experts (p = 0.012). The SPK cut-off score of 93.1 discriminates between novice and expert surgeons. Surgical procedural knowledge can reliably be assessed using our SPK assessment tool. It can discriminate between novice and expert surgeons for common general surgical procedures. Future studies are planned to evaluate its use for more complex procedures.

  6. Reassessment of coal pillar design procedure

    CSIR Research Space (South Africa)

    Madden, BJ

    1995-12-01

    Full Text Available The SIMRAC project COL 021A entitled “a reassessment of coal pillar design procedures” set out to achieve a coal pillar design procedure that takes cognisance of different geological and structural factors as well as the influence...

  7. Surgical specialty procedures in rural surgery practices: implications for rural surgery training.

    Science.gov (United States)

    Sticca, Robert P; Mullin, Brady C; Harris, Joel D; Hosford, Clint C

    2012-12-01

    Specialty procedures constitute one eighth of rural surgery practice. Currently, general surgeons intending to practice in rural hospitals may not get adequate training for specialty procedures, which they will be expected to perform. Better definition of these procedures will help guide rural surgery training. Current Procedural Terminology codes for all surgical procedures for 81% of North Dakota and South Dakota rural surgeons were entered into the Dakota Database for Rural Surgery. Specialty procedures were analyzed and compared with the Surgical Council on Resident Education curriculum to determine whether general surgery training is adequate preparation for rural surgery practice. The Dakota Database for Rural Surgery included 46,052 procedures, of which 5,666 (12.3%) were specialty procedures. Highest volume specialty categories included vascular, obstetrics and gynecology, orthopedics, cardiothoracic, urology, and otolaryngology. Common procedures in cardiothoracic and vascular surgery are taught in general surgical residency, while common procedures in obstetrics and gynecology, orthopedics, urology, and otolaryngology are usually not taught in general surgery training. Optimal training for rural surgery practice should include experience in specialty procedures in obstetrics and gynecology, orthopedics, urology, and otolaryngology. Copyright © 2012 Elsevier Inc. All rights reserved.

  8. [E-learning in surgical procedure manuals and blogs].

    Science.gov (United States)

    Pape-Köhler, C; Chmelik, C; Heiss, M M; Jauch, K W

    2010-01-01

    E-learning is the constant companion for every surgeon in the initial years of training. Later they will be mostly used as reliable reference works. With the spread of computers and the possibilities of the World Wide Web there is an increasingly large selection of electronic learning options on the market. In this review the most important current surgical e-learning options will be presented. Inclusion criteria were determined according to a defined term which must be fulfilled for e-learning in operation techniques. Options were identified by an online search and analyzed using a criteria catalogue. This catalogue contained a total of 31 criteria for the fields of "content presentation", "infrastructure" and "evaluation". A differentiation was made between online and offline options. A total of five online and five offline options which fulfilled the inclusion criteria could be identified. None of the options currently encompass a similarly high number of operations compared to those offered in conventional operation textbooks. The use and combination of media, such as video and animation, are limited to online options and are available in various forms and combinations. The use of options is mostly free of charge and at most registration is necessary. Some of the options are multilingual. The range of e-learning options for general and visceral surgical operations is at present still limited and reduced to a few platforms. The scientific content and validity of the contents are not always guaranteed. It remains to be seen how the options presented here will develop further and what the results of the necessary scientific evaluation will be.

  9. [The transrectus sheath preperitoneal procedure: a safe, effective and cheap surgical approach to inguinal hernia?

    NARCIS (Netherlands)

    Prins, M.W.; Voropai, D.A.; Laarhoven, C.J.H.M. van; Akkersdijk, W.L.

    2013-01-01

    The main complication of surgery for inguinal hernia is chronic postoperative pain. This is often reported following the Lichtenstein procedure. A new, open surgical technique for the repair of inguinal hernia has been developed. This procedure is called the transrectus sheath preperitoneal

  10. Retention of laparoscopic procedural skills acquired on a virtual-reality surgical trainer

    DEFF Research Database (Denmark)

    Nielsen, Mathilde Maagaard; Sørensen, J L; Oestergaard, Jeanett

    2011-01-01

    BACKGROUND: Virtual-reality (VR) simulator training has been shown to improve surgical performance in laparoscopic procedures in the operating room. We have, in a randomised controlled trial, demonstrated transferability to real operations. The validity of the LapSim virtual-reality simulator...... as an assessment tool has been demonstrated in several reports. However, an unanswered question regarding simulator training is the durability, or retention, of skills acquired during simulator training. The aim of the present study is to assess the retention of skills acquired using the LapSim VR simulator, 6...... and 18 months after an initial training course. METHODS AND MATERIALS: The investigation was designed as a 6- and 18-month follow-up on a cohort of participants who earlier participated in a skills training programme on the LapSim VR. The follow-up cohort consisted of trainees and senior consultants...

  11. [Principles of direct surgical procedures on the pancreas in surgical treatment of chronic pancreatitis].

    Science.gov (United States)

    Kopchak, V M; Khomiak, I V; Cheverdiuk, D A; Kopchak, K V; Duvalko, A V; Serdiuk, V P

    2012-01-01

    An analysis of treatment of 584 patients with complicated forms of chronic pancreatitis operated during 2000-2100 years was carried out. Quality of life of postoperative patients was estimated according to a technique of calculations of modules EORTC QLQ-C30 and EORTC QLQ-PAN26. The indicators of quality of life have improved by 19.7% in performance of saving duodenal outflow of operations of pancreatic juice. Change of the surgical strategy has led to decreased number of postoperative complications by 4.6% and to satisfactory long-term results in 92.6% of the patients.

  12. The effect of economic downturn on the volume of surgical procedures: A systematic review.

    Science.gov (United States)

    Fujihara, Nasa; Lark, Meghan E; Fujihara, Yuki; Chung, Kevin C

    2017-08-01

    Economic downturn can have a wide range of effects on medicine at both individual and national levels. We aim to describe these effects in relation to surgical volume to guide future planning for physician specialization, patient expectations in the face of economic crises, or estimating healthcare expenditure. We hypothesized that because of high out-of-pocket costs, cosmetic procedure volumes would be most affected by economic decline. A systematic review was conducted using MEDLINE, Embase, and ABI/INFORMS. The main search terms were "economic recession" and "surgical procedures, operative". Studies were included if surgical volumes were measured and economic indicators were used as predictors of economic conditions. Twelve studies were included, and the most common subject was cosmetic (n = 5), followed by orthopedic (n = 2) and cardiac surgeries (n = 2). The majority of studies found that in periods of economic downturn, surgical volume decreased. Among the eight studies using Pearson's correlation analysis, there were no significant differences between cosmetic procedures and other elective procedures, indicating that cosmetic procedures may display trends similar to those of non-cosmetic elective procedures in periods of economic downturn. Surgical volume generally decreased when economic indicators declined, observed for both elective and non-elective surgery fields. However, a few specific procedure volumes such as vasectomy and caesarean section for male babies increased during the economic downturn. Knowledge of these trends can be useful for future surgical planning and distribution of healthcare resources. Copyright © 2017 IJS Publishing Group Ltd. Published by Elsevier Ltd. All rights reserved.

  13. Comparative evaluation of stress levels before, during, and after periodontal surgical procedures with and without nitrous oxide-oxygen inhalation sedation

    Directory of Open Access Journals (Sweden)

    Gurkirat Sandhu

    2017-01-01

    Full Text Available Context: Periodontal surgical procedures produce varying degree of stress in all patients. Nitrous oxide-oxygen inhalation sedation is very effective for adult patients with mild-to-moderate anxiety due to dental procedures and needle phobia. Aim: The present study was designed to perform periodontal surgical procedures under nitrous oxide-oxygen inhalation sedation and assess whether this technique actually reduces stress physiologically, in comparison to local anesthesia alone (LA during lengthy periodontal surgical procedures. Settings and Design: This was a randomized, split-mouth, cross-over study. Materials and Methods: A total of 16 patients were selected for this randomized, split-mouth, cross-over study. One surgical session (SS was performed under local anesthesia aided by nitrous oxide-oxygen inhalation sedation, and the other SS was performed on the contralateral quadrant under LA. For each session, blood samples to measure and evaluate serum cortisol levels were obtained, and vital parameters including blood pressure, heart rate, respiratory rate, and arterial blood oxygen saturation were monitored before, during, and after periodontal surgical procedures. Statistical Analysis Used: Paired t-test and repeated measure ANOVA. Results: The findings of the present study revealed a statistically significant decrease in serum cortisol levels, blood pressure and pulse rate and a statistically significant increase in respiratory rate and arterial blood oxygen saturation during periodontal surgical procedures under nitrous oxide inhalation sedation. Conclusion: Nitrous oxide-oxygen inhalation sedation for periodontal surgical procedures is capable of reducing stress physiologically, in comparison to LA during lengthy periodontal surgical procedures.

  14. Prevalence of Neoplastic Diseases in Pet Birds Referred for Surgical Procedures

    Directory of Open Access Journals (Sweden)

    Patrícia F. Castro

    2016-01-01

    Full Text Available Neoplastic disease is common in pet birds, particularly in psittacines, and treatment should be primarily aimed at tumor eradication. Nineteen cases of pet birds submitted to diagnostic and/or therapeutic surgical procedures due to neoplastic disease characterized by the presence of visible masses were retrospectively analyzed; affected species, types of neoplasms and respective locations, and outcomes of surgical procedures were determined. All birds undergoing surgery belonged to the order Psittaciformes; the Blue-fronted parrot (Amazona aestiva was the prevalent species. Lipoma was the most frequent neoplasm in the sample studied. Most neoplasms affected the integumentary system, particularly the pericloacal area. Tumor resection was the most common surgical procedure performed, with high resolution and low recurrence rates.

  15. Prevalence of Neoplastic Diseases in Pet Birds Referred for Surgical Procedures

    Science.gov (United States)

    Castro, Patrícia F.; Fantoni, Denise T.; Miranda, Bruna C.; Matera, Julia M.

    2016-01-01

    Neoplastic disease is common in pet birds, particularly in psittacines, and treatment should be primarily aimed at tumor eradication. Nineteen cases of pet birds submitted to diagnostic and/or therapeutic surgical procedures due to neoplastic disease characterized by the presence of visible masses were retrospectively analyzed; affected species, types of neoplasms and respective locations, and outcomes of surgical procedures were determined. All birds undergoing surgery belonged to the order Psittaciformes; the Blue-fronted parrot (Amazona aestiva) was the prevalent species. Lipoma was the most frequent neoplasm in the sample studied. Most neoplasms affected the integumentary system, particularly the pericloacal area. Tumor resection was the most common surgical procedure performed, with high resolution and low recurrence rates. PMID:26981315

  16. Locally advanced rectal cancer: a cooperative surgical approach to a complex surgical procedure.

    LENUS (Irish Health Repository)

    Owens, P

    2015-01-01

    Single stage en bloc abdominoperineal resection and sacrectomy, with a myocutaneous flap closure is a relatively uncommon procedure. Our case study of a 77 year old man with a locally invasive rectal adenocarcinoma highlights the complex intraoperative management of such a patient.

  17. Chipless RFID design procedure and detection techniques

    CERN Document Server

    Rezaiesarlak, Reza

    2015-01-01

    This book examines the design of chipless RFID systems. The authors begin with the historical development of wireless identification systems and finally arrive at a representation of the chipless RFID system as a block diagram illustration. Chapter 2 is devoted to the theoretical bases for the design of chipless RFID tags and detection techniques in the reader. A rigorous mathematical formulation is presented based on the singularity expansion method (SEM) and characteristic mode theory (CMT) in order to study the scattered fields from an object in a general form. Th e authors attempt to explain some physical concepts behind the mathematical descriptions of the theories in this chapter. In Chapter 3, two design procedures based on complex natural resonance and CMT are presented for the design of the chipless RFID tag. By studying the effects of structural parameters on radiation and resonant behaviors of the tag, some design conclusions are presented in this chapter. Chapter 4 is dedicated to the time-frequen...

  18. Use of 0.5% bupivacaine with buprenorphine in minor oral surgical procedures.

    Science.gov (United States)

    Nagpal, Varun; Kaur, Tejinder; Kapila, Sarika; Bhullar, Ramandeep Singh; Dhawan, Amit; Kaur, Yashmeet

    2017-01-01

    Minor oral surgical procedures are the most commonly performed procedures by oral and maxillofacial surgeons. Performance of painless surgical procedure is highly appreciated by the patients and is possible through the use of local anesthesia, conscious sedation or general anesthesia. Postoperative pain can also be controlled by the use of opioids, as opioid receptors exist in the peripheral nervous system and offers the possibility of providing postoperative analgesia in the surgical patient. The present study compares the efficacy of 0.5% bupivacaine versus 0.5% bupivacaine with 0.3 mg buprenorphine in minor oral surgical procedures. The present study was conducted in 50 patients who required minor oral surgical procedures under local anesthesia. Two types of local anesthetic solutions were used- 0.5% bupivacaine with 1:200000 epinephrine in group I and a mixture of 39 ml of 0.5% bupivacaine with epinephrine 1:200000 and 1 ml of 300 μg buprenorphine (3 μg/kg)in group II. Intraoperative and postoperative evaluation was carried out for both the anesthetic solutions. The mean duration of postoperative analgesia in bupivacaine group (508.92 ± 63.30 minutes) was quite less than the buprenorphine combination group (1840.84 ± 819.51 minutes). The mean dose of postoperative analgesic medication in bupivacaine group (1.64 ± 0.99 tablets) was higher than buprenorphine combination group (0.80 ± 1.08 tablets). There was no significant difference between the two groups regarding the onset of action of the anesthetic effect and duration of anesthesia. Buprenorphine can be used in combination with bupivacaine for patients undergoing minor oral surgical procedures to provide postoperative analgesia for a longer duration.

  19. Combined Surgical and Transhepatic Rendezvous Procedure for Relieving Anastomotic Biliary Obstruction in Children with Liver Transplants.

    Science.gov (United States)

    Crowley, John; Soltys, Kyle; Sindhi, Rakesh; Baskin, Kevin; Yilmaz, Sabri; Close, Orrie; Medsinge, Avinash

    2017-08-01

    Four children (3 boys and 1 girl, age 1.4-9.4 y) presented 2-70 months after liver transplantation (mean 26 months) with high-grade narrowing at the surgical anastomosis that could not be crossed at percutaneous transhepatic cholangiography. Each patient was treated with a combined surgical and interventional radiology "rendezvous" procedure. Biliary drainage catheters were left in place for an average of 6 months after the procedure. At a mean 7.5 months after biliary drainage catheter removal, all children were catheter-free without clinical or biochemical evidence of biliary stricture recurrence. Copyright © 2016 SIR. Published by Elsevier Inc. All rights reserved.

  20. “Reality Surgery” — A Research Ethics Perspective on the Live Broadcast of Surgical Procedures

    Science.gov (United States)

    Williams, Judson B.; Mathews, Robin; D'Amico, Thomas A.

    2013-01-01

    In recent years, the live broadcasting of medical and surgical procedures has gained worldwide popularity. While the practice has appropriately been met with concerns for patient safety and privacy, many physicians tout the merits of real time viewing as a form of investigation, accelerating the process leading to adoption or abolition of newer techniques or technologies. This view introduces a new series of ethical considerations that need to be addressed. As such, this article considers, from a research ethics perspective, the use of live surgical procedure broadcast for investigative purposes. PMID:21292217

  1. [Complex surgical procedures in orthopedics and trauma surgery. A contribution to the proposal procedure for the DRG system in 2009].

    Science.gov (United States)

    Flohé, S; Nabring, J; Luetkes, P; Nast-Kolb, D; Windolf, J

    2008-10-01

    Since the DRG system was introduced in 2003/2004 the system for remuneration has been continually modified in conjunction with input from specialized medical associations. As part of this development of the payment system, the criteria for classification of a diagnosis-related group were further expanded and new functions were added. This contribution addresses the importance of the complex surgical procedures as criteria for subdivision of the DRG case-based lump sums in orthopedics and trauma surgery.

  2. Surgical resident involvement is safe for common elective general surgery procedures.

    Science.gov (United States)

    Tseng, Warren H; Jin, Leah; Canter, Robert J; Martinez, Steve R; Khatri, Vijay P; Gauvin, Jeffrey; Bold, Richard J; Wisner, David; Taylor, Sandra; Chen, Steven L

    2011-07-01

    Outcomes of surgical resident training are under scrutiny with the changing milieu of surgical education. Few have investigated the effect of surgical resident involvement (SRI) on operative parameters. Examining 7 common general surgery procedures, we evaluated the effect of SRI on perioperative morbidity and mortality and operative time (OpT). The American College of Surgeons National Surgical Quality Improvement Program database (2005 to 2007) was used to identify 7 cases of nonemergent operations. Cases with simultaneous procedures were excluded. Logistic regression was performed across all procedures and within each procedure incorporating SRI, OpT, and risk-stratifying American College of Surgery National Surgical Quality Improvement Program morbidity and mortality probability scores, which incorporate multiple prognostic individual patient factors. Procedure-specific, SRI-stratified OpTs were compared using Wilcoxon rank-sum tests. A total of 71.3% of the 37,907 cases had SRI. Absolute 30-day morbidity for all cases with SRI and without SRI were 3.0% and 1.0%, respectively (p < 0.001); absolute 30-day mortality for all cases with SRI and without SRI were 0.1% and 0.08%, respectively (p < 0.001). After multivariate analysis by specific procedure, SRI was not associated with increased morbidity but was associated with decreased mortality during open right colectomy (odds ratio 0.32; p = 0.01). Across all procedures, SRI was associated with increased morbidity (odds ratio 1.14; p = 0.048) but decreased mortality (odds ratio 0.42; p < 0.001). Mean OpT for all procedures was consistently lower for cases without SRI. SRI has a measurable impact on both 30-day morbidity and mortality and OpT. These data have implications to the impact associated with surgical graduate medical education. Further studies to identify causes of patient morbidity and prevention strategies in surgical teaching environments are warranted. Copyright © 2011 American College of Surgeons

  3. Surgical Success in Chronic Pancreatitis: Sequential Endoscopic Retrograde Cholangiopancreatography and Surgical Longitudinal Pancreatojejunostomy (Puestow Procedure).

    Science.gov (United States)

    Ford, Kathryn; Paul, Anu; Harrison, Phillip; Davenport, Mark

    2016-06-01

    Introduction Chronic pancreatitis (CP) can be a cause of recurrent, severe, disabling abdominal pain in children. Surgery has been suggested as a useful therapy, although experience is limited and the results unpredictable. We reviewed our experience of a two-stage protocol-preliminary endoscopic retrograde cholangiopancreatography (ERCP) and duct stenting, and if symptoms resolved, definitive surgical decompression by longitudinal pancreatojejunostomy (LPJ) (Puestow operation). Patients and Methods This is a single-center, retrospective review of children with established CP who underwent an LPJ between February 2002 and September 2012. A questionnaire was completed (incorporating visual analog scale pain and lifestyle scores) to assess functional outcome. Data are expressed as median (range). Results In this study, eight (M:F ratio of 4:4) children underwent an LPJ and one female child had a more limited pancreatojejunostomy anastomosis following preliminary ERCP and stent placement where possible. Diagnoses included hereditary pancreatitis (n = 3), idiopathic or structural pancreatitis (n = 5), and duct stricture following radiotherapy (n = 1). Median duct diameter presurgery was 5 (4-11) mm. Endoscopic placement of a Zimmon pancreatic stent was possible in six with relief of symptoms in all. Median age at definitive surgery was 11 (range, 7-17) years with a median postoperative stay of 9 (range, 7-12) days and a follow-up of 6 (range, 0.5-12) years. All children reported markedly reduced episodes of pain postprocedure. One developed diabetes mellitus, while three had exocrine deficiency (fecal elastase Puestow operation was safe and complication-free with good medium-term relief of symptoms. We were not able to identify a consistent etiology-associated outcome. Georg Thieme Verlag KG Stuttgart · New York.

  4. Changes in surgical procedures for acromioclavicular joint dislocation over the past 30 years.

    Science.gov (United States)

    Takase, Katsumi; Yamamoto, Kengo

    2013-10-01

    Generally, surgical treatment is recommended for Rockwood type 5 traumatic acromioclavicular joint dislocations. Since 1980, the authors have performed the modified Dewar procedure, the modified Cadenat procedure, and anatomical reconstruction of the coracoclavicular ligaments for this injury. The goal of this study was to determine the ideal surgical procedure for acromioclavicular joint dislocations by comparing these 3 procedures. The modified Dewar procedure was performed on 55 patients (Dewar group), the modified Cadenat procedure was performed on 73 patients (Cadenat group), and anatomical reconstruction of the coracoclavicular ligaments was performed on 11 patients (reconstruction group). According to the UCLA scoring system, therapeutic results averaged 27.3 points in the Dewar group, 28.2 in the Cadenat group, and 28.4 in the reconstruction group. The incidence of residual subluxation or dislocation in the acromioclavicular joint was evaluated at final radiographic follow-up. Subluxation occurred in 21 patients in the Dewar group, 18 in the Cadenat group, and 3 in the reconstruction group. Dislocation occurred in 3 patients in the Dewar group. Osteoarthritic changes in the acromioclavicular joint occurred in 20 patients in the Dewar group, 9 in the Cadenat group, and 1 in the reconstruction group. The modified Cadenat procedure can provide satisfactory therapeutic results and avoid postoperative failure or loss of reduction compared with the modified Dewar procedure. However, the modified Cadenat procedure does not anatomically restore the coracoclavicular ligaments. Anatomic restoration of both coracoclavicular ligaments can best restore acromioclavicular joint function. Copyright 2013, SLACK Incorporated.

  5. Multimodal Analgesia in Breast Surgical Procedures: Technical and Pharmacological Considerations for Liposomal Bupivacaine Use

    Directory of Open Access Journals (Sweden)

    Anoushka M. Afonso, MD

    2017-09-01

    Full Text Available Enhanced recovery after surgery is a multidisciplinary perioperative clinical pathway that uses evidence-based interventions to improve the patient experience as well as increase satisfaction, reduce costs, mitigate the surgical stress response, accelerate functional recovery, and decrease perioperative complications. One of the most important elements of enhanced recovery pathways is multimodal pain management. Herein, aspects relating to multimodal analgesia following breast surgical procedures are discussed with the understanding that treatment decisions should be individualized and guided by sound clinical judgment. A review of liposomal bupivacaine, a prolonged-release formulation of bupivacaine, in the management of postoperative pain following breast surgical procedures is presented, and technical guidance regarding optimal administration of liposomal bupivacaine is provided.

  6. A standard operating procedure for the surgical implantation of transmitters in juvenile salmonids

    Science.gov (United States)

    Liedtke, T.L.; Beeman, J.W.; Gee, L.P.

    2012-01-01

    Biotelemetry is a useful tool to monitor the movements of animals and is widely applied in fisheries research. Radio or acoustic technology can be used, depending on the study design and the environmental conditions in the study area. A broad definition of telemetry also includes the use of Passive Integrated Transponder (PIT) tags, either separately or with a radio or acoustic transmitter. To use telemetry, fish must be equipped with a transmitter. Although there are several attachment procedures available, surgical implantation of transmitters in the abdominal cavity is recognized as the best technique for long-term telemetry studies in general (Stasko and Pincock, 1977; Winter, 1996; Jepsen, 2003), and specifically for juvenile salmonids, Oncorhynchus spp. (Adams and others, 1998a, 1998b; Martinelli and others, 1998; Hall and others, 2009). Studies that use telemetry assume that the processes by which the animals are captured, handled, and tagged, as well as the act of carrying the transmitter, will have minimal effect on their behavior and performance. This assumption, commonly stated as a lack of transmitter effects, must be valid if telemetry studies are to describe accurately the movements and behavior of an entire population of interest, rather than the subset of that population that carries transmitters. This document describes a standard operating procedure (SOP) for surgical implantation of radio or acoustic transmitters in juvenile salmonids. The procedures were developed from a broad base of published information, laboratory experiments, and practical experience in tagging thousands of fish for numerous studies of juvenile salmon movements near Columbia River and Snake River hydroelectric dams. Staff from the Western Fisheries Research Center's Columbia River Research Laboratory (CRRL) frequently have used telemetry studies to evaluate new structures or operations at hydroelectric dams in the Columbia River Basin, and these evaluations typically

  7. Energy conservation aircraft design and operational procedures

    Energy Technology Data Exchange (ETDEWEB)

    Poisson-Quinton, P.

    1978-01-01

    The paper reviews studies associated with improved fuel efficiency. Several aircraft design concepts are described including: (1) increases in aerodynamic efficiency through decreased friction drag, parasitic drag, and drag due to lift, (2) structural efficiency and the implementation of composite materials, (3) active control technology, (4) the optimization of airframe-engine integration, and (5) VTOL and STOL concepts. Consideration is also given to operational procedures associated with flight management, terminal-area operations, and the influence of environmental noise constraints on fuel economy.

  8. Prospective randomized assessment of single versus double-gloving for general surgical procedures.

    Science.gov (United States)

    Na'aya, H U; Madziga, A G; Eni, U E

    2009-01-01

    There is increased tendency towards double-gloving by general surgeons in our practice, due probably to awareness of the risk of contamination with blood or other body fluids during surgery. The aim of the study was to compare the relative frequency of glove puncture in single-glove versus double glove sets in general surgical procedures, and to determine if duration of surgery affects perforation rate. Surgeons at random do single or double gloves at their discretion, for general surgical procedures. All the gloves used by the surgeons were assessed immediately after surgery for perforation. A total of 1120 gloves were tested, of which 880 were double-glove sets and 240 single-glove sets. There was no significant difference in the overall perforation rate between single and double glove sets (18.3% versus 20%). However, only 2.3% had perforations in both the outer and inner gloves in the double glove group. Therefore, there was significantly greater risk for blood-skin exposure in the single glove sets (p < 0.01). The perforation rate was also significantly greater during procedures lasting an hour or more compared to those lasting less than an hour (p < 0.01). Double-gloving reduces the risk of blood-skin contamination in all general surgical procedures, and especially so in procedures lasting an hour or more.

  9. Postoperative evaluation of surgical procedures in congenital heart disease with MR imaging

    International Nuclear Information System (INIS)

    Seelos, K.C.; Kersting-Sommerhoff, B.; Higgins, C.B.

    1989-01-01

    This paper reports on a study in which electrocardiographically gated spin-echo MR imaging was used to evaluate 23 patients with congenital heart disease who had undergone Waterston (n = 3), Potts (n = 2), Senning (n = 3), Fontan (n = 3), Rastelli (n = 4), Damus (n = 1) and Jatene (n = 7) procedures. Surgical shunts, conduits, or baffles were identified correctly in all patients. Patency, atresia and hypoplasia of central pulmonary arteries (PAs) as well as postoperative complications (focal stenosis of PAs, thrombosed pseudoaneurysm, intramural abscess) were diagnosed. MR findings were corroborated with angiography, echocardiography, and surgery. Narrowing of the right ventricular outflow tract and focal compression of the proximal PAs were recognized as specific complications of the Jatene procedure. MR imaging appears to be effective for the postoperative evaluation of surgical procedures used for congenital heart disease

  10. EVALUATION OF OUTCOME OF VARIOUS SURGICAL PROCEDURES FOR UPPER EYELID PTOSIS

    Directory of Open Access Journals (Sweden)

    Nagaraju

    2015-02-01

    Full Text Available INTRODUCTION: There are various procedures available for ptosis correction. Successful outcome not only depends on correct technique but also choosing appropriate procedure for each patient. Selection of procedure is based on available levator function and also other factors like etiology, severity, Bell’s phenomenon etc. If such varied procedure s are performed in a group of patients based on standard criteria and results are evaluated systematically we can determine what works best for a given patient . AIM : Evaluation of outcome of various surgical procedures for upper eyelid ptosis . METHODOLOGY : 25 eyelids of 20 patients who presented to a tertiary centre in south India with complaint of drooping of upper lid were considered. All subjects underwent complete ocular examination corrected visual acuity and detailed ptosis evaluation with particular emphasis on measurement of levator muscle function, MRD1 (margin reflex distance - 1, palpebral fissure width in different gazes and margin crease distance. The effect of various factors like MRD1, MCD, levator function were assessed, the amount of correction required and appropriate surgical procedure was chosen. Surgical procedure of Levator resection, frontalis sling operation, anterior levator aponeurosis advancement, o r other ptosis correction procedures under appropriate anaesthesia were performed. Post - operative evaluation in terms of visual acuity, MRD, Interpalpebral fissure height, lid symmetry, lagophthalmos and complications (if any was done. RESULTS : Levator muscle resection was done in 28% of eyelids, frontal sling surgery in 60% of eyelids, Levator muscle plication in 8% eyelids and levator muscle disinsertion with frontal sling surgery in 4% eyes. Undercorrection was seen in about 44% of eyelids in varying degrees. 56% of the eyes had optimal correction. Symmetric correction was achieved in 76% of eyelids. CONCLUSION: The influence of various preoperative factors on the

  11. Surgical reconstruction of pressure ulcer defects: a single- or two-stage procedure?

    LENUS (Irish Health Repository)

    Laing, Tereze A

    2012-02-01

    BACKGROUND: The surgical management of pressure ulcers traditionally involved staged procedures, with initial debridement of necrotic or infected material followed by reconstruction at a later date when the wound was deemed viable and free of gross infection. However, over the past decade, it has been suggested that a single-stage procedure, combining initial debridement and definitive reconstruction, may provide advantages over staged surgery. We present our experience with the staged approach and review the current evidence for both methods. SUBJECTS AND SETTINGS: : We reviewed medical records of all patients referred to our service for pressure ulcer management between October 2001 and October 2007. The National Rehabilitation Hospital is the national center in Ireland for primary rehabilitation of adults and children suffering from spinal and brain injury, serving patients locally and from around the country. METHODS: All subjects who were managed surgically underwent a 2-stage procedure, with initial debridement and subsequent reconstruction. The main outcome measures were length of hospital stay, postoperative morbidity and mortality, and time to complete ulcer healing. RESULTS: Forty-one of 108 patients with 58 pressure ulcers were managed surgically. All patients underwent initial surgical debridement and 20 patients underwent subsequent pressure ulcer reconstruction. Postreconstructive complications occurred in 5 patients (20%). The mean time to complete ulcer healing was 17.4 weeks. Partial flap necrosis occurred in 3 patients, but there were no episodes of flap failure. CONCLUSIONS: We achieved favorable results with a 2-stage reconstruction technique and suggest that the paucity of evidence related to single-stage procedures does not support a change in surgical management.

  12. [The transrectus sheath preperitoneal procedure: a safe, effective and cheap surgical approach to inguinal hernia?].

    Science.gov (United States)

    Prins, M W Wiesje; Voropai, D A Dasha; van Laarhoven, C J H M Kees; Akkersdijk, Willem L

    2013-01-01

    The main complication of surgery for inguinal hernia is chronic postoperative pain. This is often reported following the Lichtenstein procedure. A new, open surgical technique for the repair of inguinal hernia has been developed. This procedure is called the transrectus sheath preperitoneal procedure (TREPP). At TREPP a lightweight mesh with a ring made of memory metal is introduced into the preperitoneal space through the transrectus sheath. The first results of this operative technique are very promising: short operation time, short learning curve and not many patients with chronic postoperative pain. In a randomised, multi-centre study which will start mid-2013 (ISRCTN18591339), the TREPP procedure is compared with the transinguinal preperitoneal procedure. The primary outcome measure of this study is chronic postoperative pain.

  13. FIRST METATARSOPHALANGEAL JOINT OSTEOARTHRITIS: PERCUTANEOUS SURGERY, CHOICE OF A SURGICAL PROCEDURE, CLINICAL AND RADIOGRAPHIC CLASSIFICATION

    Directory of Open Access Journals (Sweden)

    S. Yu. Berezhnoy

    2017-01-01

    Full Text Available Introduction. Hallux rigidus is observed in approximately 2.5% of the adult population. Until now neither a unified classification of hallux rigidus appears to exist nor any clear principles to choose the surgical method. The variety of clinical and radiological signs explains the difficulties in establishing a comprehensive classification system and in selection of the criteria for surgical procedure. There are few published reports about hallux rigidus percutaneous surgical treatment. Existing papers are dedicated to a limited number of percutaneous techniques.The purpose of this study was to evaluate the efficacy of percutaneous techniques for surgical treatment of the first metatarsophalangeal joint osteoarthritis; to specify factors determining the choice of procedure; to develop a grading system of the hallux rigidus severity which will help in selection of surgery. Materials and methods. Based on 156 surgeries (107 patients the author demonstrated the possibilities of percutaneous techniques in the surgical treatment of hallux rigidus of different stages as well as provided a brief description of used surgical techniques.Results. The mean age of patients was 48.8 years (ranged from 18 to 73. The mean follow-up was 7 months (ranged from 3 to 54. At the specified time the treatment outcomes of 103 patients (150 feet were analyzed. Mean hospital stay was 0.78 days (ranged from 0 to 1. No infectious or wound-healing problems were observed. Overall, the patients were completely satisfied with the outcomes of 89 surgical treatment, qualified satisfaction was reported with patients in respect of outcomes of 57 surgeries. Four unsatisfactory outcomes were observed. The role of the relatively long first metatarsal in the development of hallux rigidus was confirmed. Conclusion. Percutaneous techniques provide successful treatment for all stages of hallux rigidus. The choice of a specific surgical technique may be challenging and requires

  14. The use of multimedia consent programs for surgical procedures: a systematic review.

    Science.gov (United States)

    Nehme, Jean; El-Khani, Ussamah; Chow, Andre; Hakky, Sherif; Ahmed, Ahmed R; Purkayastha, Sanjay

    2013-02-01

    To compare multimedia and standard consent, in respect to patient comprehension, anxiety, and satisfaction, for various surgical/interventional procedures. Electronic searches of PubMed, MEDLINE, Ovid, Embase, and Google Scholar were performed. Relevant articles were assessed by 2 independent reviewers. Comparative (randomized and nonrandomized control trials) studies of multimedia and standard consent for a variety of surgical/interventional procedures were included. Studies had to report on at least one of the outcome measures. Studies were reviewed by 2 independent investigators. The first investigator extracted all relevant data, and consensus of each extraction was performed by a second investigator to verify the data. Overall, this review suggests that the use of multimedia as an adjunct to conventional consent appears to improve patient comprehension. Multimedia leads to high patient satisfaction in terms of feasibility, ease of use, and availability of information. There is no conclusive evidence demonstrating a significant reduction in preoperative anxiety.

  15. Control of bleeding in surgical procedures: critical appraisal of HEMOPATCH (Sealing Hemostat

    Directory of Open Access Journals (Sweden)

    Lewis KM

    2015-12-01

    Full Text Available Kevin Michael Lewis,1 Carl Erik Kuntze,2 Heinz Gulle3 1Preclinical Safety and Efficacy, Baxter Healthcare Corporation, Deerfield, IL, USA; 2Medical Affairs, Baxter Healthcare SA, Zurich, Switzerland; 3Surgical Sciences and Engineering, Baxter Medical Products GmbH, Vienna, Austria Abstract: The need for advanced hemostatic agents increases with the complexity of surgical procedures and use of anticoagulation and antiplatelet treatments. HEMOPATCH (Sealing Hemostat is a novel, advanced hemostatic pad that is composed of a synthetic, protein-reactive monomer and a collagen backing. The active side is covered with a protein-reactive monomer: N-hydroxysuccinimide functionalized polyethylene glycol (NHS-PEG. NHS-PEG rapidly affixes the collagen pad to tissue to promote and maintain hemostasis. The combined action of the NHS-PEG and collagen is demonstrated to have benefit relative to other hemostatic agents in surgery and preclinical surgical models. This paper reviews the published investigations and case reports of the hemostatic efficacy of HEMOPATCH, wherein HEMOPATCH is demonstrated to be an effective, easy-to-use hemostatic agent in open and minimally invasive surgery of patients with thrombin- or platelet-induced coagulopathies. Keywords: HEMOPATCH, hemostasis, surgical hemostasis, sealing, surgical sealant

  16. Hypnosis as a Valuable Tool for Surgical Procedures in the Oral and Maxillofacial Area.

    Science.gov (United States)

    Montenegro, Gil; Alves, Luiza; Zaninotto, Ana Luiza; Falcão, Denise Pinheiro; de Amorim, Rivadávio Fernandes Batista

    2017-04-01

    Hypnosis is a valuable tool in the management of patients who undergo surgical procedures in the maxillofacial complex, particularly in reducing and eliminating pain during surgery and aiding patients who have dental fear and are allergic to anesthesia. This case report demonstrates the efficacy of hypnosis in mitigating anxiety, bleeding, and pain during dental surgery without anesthesia during implant placement of tooth 14, the upper left first molar.

  17. Use of topical tranexamic acid or aminocaproic acid to prevent bleeding after major surgical procedures.

    Science.gov (United States)

    Ipema, Heather J; Tanzi, Maria G

    2012-01-01

    To evaluate the literature describing topical use of tranexamic acid or aminocaproic acid for prevention of postoperative bleeding after major surgical procedures. Literature was retrieved through MEDLINE (1946-September 2011) and International Pharmaceutical Abstracts (1970-September 2011) using the terms tranexamic acid, aminocaproic acid, antifibrinolytic, topical, and surgical. In addition, reference citations from publications identified were reviewed. All identified articles in English were evaluated. Clinical trials, case reports, and meta-analyses describing topical use of tranexamic acid or aminocaproic acid to prevent postoperative bleeding were included. A total of 16 publications in the setting of major surgical procedures were included; the majority of data were for tranexamic acid. For cardiac surgery, 4 trials used solutions containing tranexamic acid (1-2.5 g in 100-250 mL of 0.9% NaCl), and 1 trial assessed a solution containing aminocaproic acid (24 g in 250 mL of 0.9% NaCl). These solutions were poured into the chest cavity before sternotomy closure. For orthopedic procedures, all of the data were for topical irrigation solutions containing tranexamic acid (500 mg-3 g in 50-100 mL of 0.9% NaCl) or for intraarticular injections of tranexamic acid (250 mg to 2 g in 20-50 mL of 0.9% sodium chloride, with or without carbazochrome sodium sulfate). Overall, use of topical tranexamic acid or aminocaproic acid reduced postoperative blood loss; however, few studies reported a significant reduction in the number of packed red blood cell transfusions or units given, intensive care unit stay, or length of hospitalization. Topical application of tranexamic acid and aminocaproic acid to decrease postsurgical bleeding after major surgical procedures is a promising strategy. Further data are needed regarding the safety of this hemostatic approach.

  18. Technical and surgical aspects of the sphenopalatine ganglion (SPG) microstimulator insertion procedure

    DEFF Research Database (Denmark)

    Assaf, A T; Hillerup, S; Rostgaard, J

    2016-01-01

    into the pterygopalatine fossa (PPF) is presented herein. Technical aspects include detailed descriptions of the preoperative planning using computed tomography or cone beam computed tomography scans for presurgical digital microstimulator insertion into the patient-specific anatomy and intraoperative verification......), and removal (n=5). This SPG microstimulator insertion procedure has sequelae comparable to other oral cavity procedures including tooth extractions, sinus surgery, and dental implant placement. Twenty-five of 29 subjects (86%) completing a self-assessment questionnaire indicated that the surgical effects were...

  19. Post-surgical infections and perioperative antibiotics usage in pediatric genitourinary procedures.

    Science.gov (United States)

    Ellett, Justin; Prasad, Michaella M; Purves, J Todd; Stec, Andrew A

    2015-12-01

    Post-surgical infections (PSIs) are a source of preventable perioperative morbidity. No guidelines exist for the use of perioperative antibiotics in pediatric urologic procedures. This study reports the rate of PSIs in non-endoscopic pediatric genitourinary procedures at our institution. Secondary aims evaluate the association of PSI with other perioperative variables, including wound class (WC) and perioperative antibiotic administration. Data from consecutive non-endoscopic pediatric urologic procedures performed between August 2011 and April 2014 were examined retrospectively. The primary outcome was the rate of PSIs. PSIs were classified as superficial skin (SS) and deep/organ site (D/OS) according to Centers for Disease Control and Prevention guidelines, and urinary tract infection (UTI). PSIs were further stratified by WC1 and WC2 and perioperative antibiotic usage. A relative risk and chi-square analysis compared PSI rates between WC1 and WC2 procedures. A total of 1185 unique patients with 1384 surgical sites were reviewed; 1192 surgical sites had follow-up for inclusion into the study. Ten total PSIs were identified, for an overall infection rate of 0.83%. Of these, six were SS, one was D/OS, and three were UTIs. The PSI rate for WC1 (885 sites) and WC2 (307 sites) procedures was 0.34% and 2.28%, respectively, p antibiotics (0.35% vs. 0.33%). All WC2 procedures received antibiotics. Post-surgical infections are associated with significant perioperative morbidity. In some studies, PSI can double hospital costs, and contribute to hospital length of stay, admission to intensive care units, and impact patient mortality. Our study demonstrates that the rate of PSI in WC1 operations is low, irrespective of whether the patient received perioperative antibiotics (0.35%) or no antibiotics (0.33%). WC2 operations were the larger source of morbidity with an infection rate of 2.28% and a 6.7 fold higher increase in relative risk. WC1 procedures have a rate of

  20. Procedural Design of Exterior Lighting for Buildings with Complex Constraints

    KAUST Repository

    Schwarz, Michael; Wonka, Peter

    2014-01-01

    We present a system for the lighting design of procedurally modeled buildings. The design is procedurally specified as part of the ordinary modeling workflow by defining goals for the illumination that should be attained and locations where

  1. A critical analysis of penile enhancement procedures for patients with normal penile size: surgical techniques, success, and complications.

    Science.gov (United States)

    Vardi, Yoram; Har-Shai, Yaron; Harshai, Yaron; Gil, Tamir; Gruenwald, Ilan

    2008-11-01

    Most men who request surgical penile enhancement have a normal-sized and fully functional penis but visualize their penises as small (psychological dysmorphism). The aim of this review is to describe the various reported techniques and to provide the available scientific data on the success and complication rates of penile enhancement procedures. We performed an extensive systematic review based on a search of the MEDLINE database for articles published between 1965 and 2008. The following key words were used: penis, enhancement, enlargement, phalloplasty, reconstruction, girth, lengthening, and augmentation. Only English-language articles that were related to penile surgery and dysmorphobia were sought. We excluded articles in which fewer than five cases were described and articles in which the type of surgical treatment and the outcome were not clear. Of the 176 papers found, 34 were selected and critically analyzed. We found only a small number of well-designed and comprehensive studies, and most of the published articles reported data that were obtained from small cohorts of patients. The more recently published studies presented better methodologies and descriptions of the surgical techniques than did the older publications. In general, penile enhancement surgery can cause a 1-2-cm increase in penile length and a 2.5-cm augmentation of penile girth. Unwanted outcomes and complications, namely penile deformity, paradoxical penile shortening, disagreeable scarring, granuloma formation, migration of injected material, and sexual dysfunction were reported frequently in these studies. Disappointing short- and long-term patient satisfaction rates following these procedures were also reported in most studies. To date, the use of cosmetic surgery to enlarge the penis remains highly controversial. There is a lack of any standardization of all described procedures. Indications and outcome measures are poorly defined, and the reported complications are unacceptably high

  2. Aesthetic Surgical Procedures in Men: Major Complications and Associated Risk Factors.

    Science.gov (United States)

    Kaoutzanis, Christodoulos; Winocour, Julian; Yeslev, Max; Gupta, Varun; Asokan, Ishan; Roostaeian, Jason; Grotting, James C; Higdon, K Kye

    2018-03-14

    The number of men undergoing cosmetic surgery is increasing in North America. To determine the incidence and risk factors of major complications in males undergoing cosmetic surgery, compare the complication profiles between men and women, and identify specific procedures that are associated with higher risk of complications in males. A prospective cohort of patients undergoing cosmetic surgery between 2008 and 2013 was identified from the CosmetAssure database. Gender specific procedures were excluded. Primary outcome was occurrence of a major complication in males requiring emergency room visit, hospital admission, or reoperation within 30 days of the index operation. Univariate and multivariate analysis evaluated potential risk factors for major complications including age, body mass index (BMI), smoking, diabetes, type of surgical facility, type of procedure, and combined procedures. Of the 129,007 patients, 54,927 underwent gender nonspecific procedures, of which 5801 (10.6%) were males. Women showed a higher mean age (46.4 ± 14.1 vs 45.2 ± 16.7 years, P procedures (RR 3.47), and combined procedures (RR 2.56). Aesthetic surgery in men is safe with low major complication rates. Modifiable predictors of complications included BMI and combined procedures.

  3. Unanticipated hospital admission in pediatric patients with congenital heart disease undergoing ambulatory noncardiac surgical procedures.

    Science.gov (United States)

    Yuki, Koichi; Koutsogiannaki, Sophia; Lee, Sandra; DiNardo, James A

    2018-05-18

    An increasing number of surgical and nonsurgical procedures are being performed on an ambulatory basis in children. Analysis of a large group of pediatric patients with congenital heart disease undergoing ambulatory procedures has not been undertaken. The objective of this study was to characterize the profile of children with congenital heart disease who underwent noncardiac procedures on an ambulatory basis at our institution, to determine the incidence of adverse cardiovascular and respiratory adverse events, and to determine the risk factors for unscheduled hospital admission. This is a retrospective study of children with congenital heart disease who underwent noncardiac procedures on an ambulatory basis in a single center. Using the electronic preoperative anesthesia evaluation form, we identified 3010 patients with congenital heart disease who underwent noncardiac procedures of which 1028 (34.1%) were scheduled to occur on an ambulatory basis. Demographic, echocardiographic and functional status data, cardiovascular and respiratory adverse events, and reasons for postprocedure admission were recorded. Univariable analysis was conducted. The unplanned hospital admission was 2.7% and univariable analysis demonstrated that performance of an echocardiogram within 6 mo of the procedure and procedures performed in radiology were associated with postoperative admission. Cardiovascular adverse event incidence was 3.9%. Respiratory adverse event incidence was 1.8%. Ambulatory, noncomplex procedures can be performed in pediatric patients with congenital heart disease and good functional status with a relatively low unanticipated hospital admission rate. © 2018 John Wiley & Sons Ltd.

  4. Central venous catheterization: comparison between interventional radiological procedure and blind surgical reocedure

    International Nuclear Information System (INIS)

    Song, Won Gyu; Jin, Gong Yong; Han, Young Min; Yu, He Chul

    2002-01-01

    To determine the usefulness and safety of radiological placement of a central venous catheter by prospectively comparing the results of interventional radiology and blind surgery. For placement of a central venous catheter, the blind surgical method was used in 78 cases (77 patients), and the interventional radiological method in 56 cases (54 patients). The male to female ratio was 66:68, and the patients' mean age was 48 (range, 18-80) years. A tunneled central venous catheter was used in 74 cases, and a chemoport in 60. We evaluated the success and duration of the procedures, the number of punctures required, and ensuing complications, comparing the results of the two methods. The success rates of the interventional radiological and the blind surgical procedure were 100% and 94.8%, respectively. The duration of central catheterization was 3-395 (mean, 120) day, that of chemoport was 160.9 days, and that of tunneled central venous catheter was 95.1 days. The mean number of punctures of the subclavian vein was 1.2 of interventional radiology, and 2.1 for blind surgery. The mean duration of the interventional radiology and the blind surgical procedure was, respectively, 30 and 40 minutes. The postprocedure complication rate was 27.6% (37 cases). Early complications occurred in nine cases (6.7%): where interventional radiology was used, there was one case of hematoma, and blind surgery gave rise to hematoma (n=2), pneumothorax (n=2), and early deviation of the catheter (n=4). Late complications occurred in 32 cases (23.9%). Interventional radiology involved infection (n=4), venous thrombosis (n=1), catheter displacement (n=2) and catheter obstruction (n=5), while the blind surgical procedure gave rise to infection (n=5), venous thrombosis (n=3), catheter displacement (n=4) and catheter obstruction (n=8). The success rate of interventional radiological placement of a central venous catheter was high and the complication rate was low. In comparison with the blind

  5. Evaluation of the Prevalence of Different Treatment Failure Modes after Crown Lengthening Surgical Procedures

    Directory of Open Access Journals (Sweden)

    Amirreza Babaloo

    2016-07-01

    Full Text Available Introduction: Preservation of the health of periodontium is very important for the long-term success of restored teeth and a balance should always be created between the patients’ esthetic requirements and the periodontal health. Failures of crown lengthening procedures are classified into early and late failures. The aim of this study was to evaluate the prevalence of early failures of crown leathering surgical procedures. Materials and methods: In this descriptive/cross-sectional study, 96 patients were selected from those referring to the Department of Periodontitis, Tabriz Faculty of Dentistry, who required crown lengthening procedures. The particulars of these patients were recorded in special forms and the reasons for the failure of surgical procedures were separately determined at 2- and 6-week intervals. In addition, the frequencies of the reasons for failures were determined in percentages and absolute frequencies. Data were analyzed with descriptive statistics (frequencies and percentages using SPSS 21. Statistical significance was set at P<0.05. Results: Evaluation of patients 6 weeks after surgery showed a failure rate of 14.5% for crown lengthening procedures in patients referring to the Department of Periodontics, Tabriz Faculty of Dentistry. The most common reasons for such early failures in the 6th week, in descending order, were a lack of sufficient keratinized gingiva around in tooth in question, fracture of the tooth structure after surgery, inadequate surgery (not creating a proper distance between the healthy margin and the crest and the coronal returning of the gingival tissue on the tooth. A lack of sufficient keratinized gingiva around the tooth was the most frequent reason for the early failure of crown lengthening procedure at both study intervals. Conclusion: It can be concluded from the results of the present study that during the 6th postoperative week the crown lengthening procedures exhibited a 14.5% failure rate

  6. Impact of gastrectomy procedural complexity on surgical outcomes and hospital comparisons.

    Science.gov (United States)

    Mohanty, Sanjay; Paruch, Jennifer; Bilimoria, Karl Y; Cohen, Mark; Strong, Vivian E; Weber, Sharon M

    2015-08-01

    Most risk adjustment approaches adjust for patient comorbidities and the primary procedure. However, procedures done at the same time as the index case may increase operative risk and merit inclusion in adjustment models for fair hospital comparisons. Our objectives were to evaluate the impact of surgical complexity on postoperative outcomes and hospital comparisons in gastric cancer surgery. Patients who underwent gastric resection for cancer were identified from a large clinical dataset. Procedure complexity was characterized using secondary procedure CPT codes and work relative value units (RVUs). Regression models were developed to evaluate the association between complexity variables and outcomes. The impact of complexity adjustment on model performance and hospital comparisons was examined. Among 3,467 patients who underwent gastrectomy for adenocarcinoma, 2,171 operations were distal and 1,296 total. A secondary procedure was reported for 33% of distal gastrectomies and 59% of total gastrectomies. Six of 10 secondary procedures were associated with adverse outcomes. For example, patients who underwent a synchronous bowel resection had a higher risk of mortality (odds ratio [OR], 2.14; 95% CI, 1.07-4.29) and reoperation (OR, 2.09; 95% CI, 1.26-3.47). Model performance was slightly better for nearly all outcomes with complexity adjustment (mortality c-statistics: standard model, 0.853; secondary procedure model, 0.858; RVU model, 0.855). Hospital ranking did not change substantially after complexity adjustment. Surgical complexity variables are associated with adverse outcomes in gastrectomy, but complexity adjustment does not affect hospital rankings appreciably. Copyright © 2015 Elsevier Inc. All rights reserved.

  7. Doctors' perspectives of informed consent for non-emergency surgical procedures: a qualitative interview study.

    Science.gov (United States)

    Wood, Fiona; Martin, Sean Michael; Carson-Stevens, Andrew; Elwyn, Glyn; Precious, Elizabeth; Kinnersley, Paul

    2016-06-01

    The need to involve patients more in decisions about their care, the ethical imperative and concerns about ligation and complaints has highlighted the issue of informed consent and how it is obtained. In order for a patient to make an informed decision about their treatment, they need appropriate discussion of the risks and benefits of the treatment. To explore doctors' perspectives of gaining informed consent for routine surgical procedures. Qualitative study using semi-structured interviews selected by purposive sampling. Data were analysed thematically. Twenty doctors in two teaching hospitals in the UK. Doctors described that while consent could be taken over a series of consultations, it was common for consent to be taken immediately prior to surgery. Juniors were often taking consent when they were unfamiliar with the procedure. Doctors used a range of communication techniques to inform patients about the procedure and its risks including quantifying risks, personalizing risk, simplification of language and use of drawings. Barriers to effective consent taking were reported to be shortage of time, clinician inexperience and patients' reluctance to be involved. Current consent processes do not appear to be ideal for many doctors. In particular, junior doctors are often not confident taking consent for surgical procedures and require more support to undertake this task. This might include written information for junior staff, observation by senior colleagues when undertaking the task and ward-based communication skills teaching on consent taking. © 2014 John Wiley & Sons Ltd.

  8. Assessment of bleeding during minor oral surgical procedures and extraction in patients on anticoagulant therapy

    Directory of Open Access Journals (Sweden)

    S Jimson

    2015-01-01

    Full Text Available Introduction: The risk of postoperative hemorrhage from oral surgical procedures has been a concern in the treatment of patients who are receiving long-term anticoagulation therapy. A study undertaken in our institution to address questions about the amount and severity of bleeding associated with minor outpatient oral surgery procedures by assessing bleeding in patients who did not alter their anticoagulant regimen. Subjects and Methods: Eighty-three patients receiving long-term anticoagulant therapy visited Department of Oral and Maxillofacial Surgery from May 2010 to October 2011 for extractions and minor oral surgical procedures. Each patient was required to undergo preoperative assessment of prothrombin time (PT and measurement of the international normalized ratio. Fifty-six patients with preoperative PT values within the therapeutic range 3-4 were included in the study. The patients′ age ranged between 30 and 75 years. Application of surgispon was done following the procedure. Extraction of teeth performed with minimal trauma to the surrounding tissues, the socket margins sutured, and sutures removed after 5 days. Results: There was no significant incidence of prolonged or excessive hemorrhage and wound infection and the healing process was normal.

  9. Smart surgical needle actuated by shape memory alloys for percutaneous procedures

    Science.gov (United States)

    Konh, Bardia

    Background: Majority of cancer interventions today are performed percutaneously using needle-based procedures, i.e. through the skin and soft tissue. Insufficient accuracy using conventional surgical needles motivated researchers to provide actuation forces to the needle's body for compensating the possible errors of surgeons/physicians. Therefore, active needles were proposed recently where actuation forces provided by shape memory alloys (SMAs) are utilized to assist the maneuverability and accuracy of surgical needles. This work also aims to introduce a novel needle insertion simulation to predict the deflection of a bevel tip needle inside the tissue. Methods: In this work first, the actuation capability of a single SMA wire was studied. The complex response of SMAs was investigated via a MATLAB implementation of the Brinson model and verified via experimental tests. The material characteristics of SMAs were simulated by defining multilinear elastic isothermal stress-strain curves. Rigorous experiments with SMA wires were performed to determine the material properties as well as to show the capability of the code to predict a stabilized SMA transformation behavior with sufficient accuracy. The isothermal stress-strain curves of SMAs were simulated and defined as a material model for the Finite Element Analysis of the active needle. In the second part of this work, a three-dimensional finite element (FE) model of the active steerable needle was developed to demonstrate the feasibility of using SMA wires as actuators to bend the surgical needle. In the FE model, birth and death method of defining boundary conditions, available in ANSYS, was used to achieve the pre-strain condition on SMA wire prior to actuation. This numerical model was validated with needle deflection experiments with developed prototypes of the active needle. The third part of this work describes the design optimization of the active using genetic algorithm aiming for its maximum flexibility

  10. Towards Clinically Optimized MRI-guided Surgical Manipulator for Minimally Invasive Prostate Percutaneous Interventions: Constructive Design*

    Science.gov (United States)

    Eslami, Sohrab; Fischer, Gregory S.; Song, Sang-Eun; Tokuda, Junichi; Hata, Nobuhiko; Tempany, Clare M.; Iordachita, Iulian

    2013-01-01

    This paper undertakes the modular design and development of a minimally invasive surgical manipulator for MRI-guided transperineal prostate interventions. Severe constraints for the MRI-compatibility to hold the minimum artifact on the image quality and dimensions restraint of the bore scanner shadow the design procedure. Regarding the constructive design, the manipulator kinematics has been optimized and the effective analytical needle workspace is developed and followed by proposing the workflow for the manual needle insertion. A study of the finite element analysis is established and utilized to improve the mechanism weaknesses under some inevitable external forces to ensure the minimum structure deformation. The procedure for attaching a sterile plastic drape on the robot manipulator is discussed. The introduced robotic manipulator herein is aimed for the clinically prostate biopsy and brachytherapy applications. PMID:24683502

  11. Android application for determining surgical variables in brain-tumor resection procedures.

    Science.gov (United States)

    Vijayan, Rohan C; Thompson, Reid C; Chambless, Lola B; Morone, Peter J; He, Le; Clements, Logan W; Griesenauer, Rebekah H; Kang, Hakmook; Miga, Michael I

    2017-01-01

    The fidelity of image-guided neurosurgical procedures is often compromised due to the mechanical deformations that occur during surgery. In recent work, a framework was developed to predict the extent of this brain shift in brain-tumor resection procedures. The approach uses preoperatively determined surgical variables to predict brain shift and then subsequently corrects the patient's preoperative image volume to more closely match the intraoperative state of the patient's brain. However, a clinical workflow difficulty with the execution of this framework is the preoperative acquisition of surgical variables. To simplify and expedite this process, an Android, Java-based application was developed for tablets to provide neurosurgeons with the ability to manipulate three-dimensional models of the patient's neuroanatomy and determine an expected head orientation, craniotomy size and location, and trajectory to be taken into the tumor. These variables can then be exported for use as inputs to the biomechanical model associated with the correction framework. A multisurgeon, multicase mock trial was conducted to compare the accuracy of the virtual plan to that of a mock physical surgery. It was concluded that the Android application was an accurate, efficient, and timely method for planning surgical variables.

  12. Surgical treatment of chronic pancreatitis using Frey's procedure: a Brazilian 16-year single-centre experience.

    Science.gov (United States)

    Gestic, Martinho Antonio; Callejas-Neto, Francisco; Chaim, Elinton Adami; Utrini, Murillo Pimentel; Cazzo, Everton; Pareja, Jose Carlos

    2011-04-01

    Surgical treatment of chronic pancreatitis is indicated for intractable pain. Frey's procedure is an accepted treatment for this disease. The aim of the present study was to describe a single-centre experience in the treatment of chronic pancreatitis using Frey's procedure. A retrospective analysis of 73 patients who underwent a Frey's procedure between 1991 to 2007 and had at least 1 year of follow-up. Demographics, indication for surgery, peri-operative complications and late outcomes were analysed. The median age was 39.9 years. Seventy out of the 73 (95.8%) patients were male. The median pre-operative body mass index (BMI) was 19.1 kg/m(2). All patients had abdominal pain, 34 (46.6%) of them daily and 13 (17.8%) weekly, with moderate or severe intensity in 98.6% (n= 72). The aetiology was secondary to alcohol in 70 patients (95.9%), with a median consumption of 278 g per day. The surgical morbidity rate was 28.7%; there were no deaths. Median post-operative follow-up was 77.0 months; 64 patients (91.4%) had complete pain relief and post-operative BMI was 22.4 kg/m(2) (P<0.001). All patients with pre-operative endocrine and exocrine insufficiencies showed no reversal of the situation. New onset insufficiencies appeared late. Frey's procedure was a safe and effective therapeutic option for the surgical treatment of patients with intractable pain caused by chronic pancreatitis. © 2011 International Hepato-Pancreato-Biliary Association.

  13. Does giving brief information keep patients calm during different oral surgical procedures?

    Science.gov (United States)

    Cabbar, Fatih; Burdurlu, Muammer Çağrı; Tomruk, Ceyda Özçakır

    2018-04-16

    Dental anxiety may play a central role in the oral health status and treatment outcomes of oral surgical procedures. The study aimed to investigate the effect that brief written information has over patients undergoing oral surgical procedures and to evaluate factors that may cause anxiety. A prospective study was performed on 38 mandibular third molar surgery patients (mean age 26.74 ± 6.44 years) and 56 implant surgery patients (mean age 49.13 ± 15.11 years). Each group was divided into two subgroups, and written information, explaining what they could expect and details about the procedure, was provided to study groups. The Spielberger State-Trait Anxiety Inventory was used to measure state (STAI-S) and trait anxiety (STAI-T). The visual analog scale (VAS) was used for pain scores preoperatively and on days 1, 3, 5, and 7. Demographic data and intraoperative behaviors of patients were recorded. All groups had similar anxiety scores at baseline. Preoperative STAI-S and VAS scores were similar between study and control groups (P > .05). Study groups showed significantly lower mean intraoperative anxiety levels (P < .05). The implant group had a significantly lower VAS score (P < .05). STAI-T and preoperative STAI-S were not related to VAS. Postoperative STAI-S and VAS and recuperation were correlated (P < .05). Women showed significantly higher anxiety and VAS scores. The patients who received written information did not report lower anxiety scores. However, improved patient cooperation could be achieved with this method. Different surgical procedures may cause anxiety for different reasons.

  14. Duty hour restrictions and surgical complications for head and neck key indicator procedures.

    Science.gov (United States)

    Smith, Aaron; Jain, Nikhita; Wan, Jim; Wang, Lei; Sebelik, Merry

    2017-08-01

    Graduate medical education has traditionally required long work hours, allowing trainees little time for adequate rest. Based on concerns over performance deterioration with sleep deprivation and its effect on patient outcomes, duty hour restrictions have been mandated. We sought to characterize complications from otolaryngology key indicator procedures performed before and after duty hour reform. Retrospective cross-sectional analysis of National Inpatient Sample (NIS). The NIS was queried for procedure codes associated with head and neck key indicator groupings for the years 2000-2002 (45,363 procedures) and 2006-2008 (51,144 procedures). Hospitals were divided into three groups: nonteaching hospitals (NTH), teaching hospitals without otolaryngology programs (TH), and teaching hospitals with otolaryngology programs (TH-OTO). Surgical complication rates, length of stay, and mortality rates were analyzed using logistic and linear regression. The number of procedures increased (12.7%), with TH-OTO contributing more in postrestriction years (21% to 30%). Overall complication rates between the two periods revealed no difference, regardless of hospital setting. Subset analysis showed some variation within each complication within each grouping. Length of stay increased at TH-OTO (2.75 to 2.78 days) and decreased at NTH (2.28 to 2.24 days) and TH (2.39 to 2.36 days). Mortality did not increase among the three hospital types (NTH, P key indicator procedures. Moreover, concerns about reduced surgical case numbers appear unfounded, especially for otolaryngology programs. 2c Laryngoscope, 127:1797-1803, 2017. © 2016 The American Laryngological, Rhinological and Otological Society, Inc.

  15. Mortality of induced abortion, other outpatient surgical procedures and common activities in the United States.

    Science.gov (United States)

    Raymond, Elizabeth G; Grossman, Daniel; Weaver, Mark A; Toti, Stephanie; Winikoff, Beverly

    2014-11-01

    The recent surge of new legislation regulating induced abortion in the United States is ostensibly motivated by the desire to protect women's health. To provide context for interpreting the risk of abortion, we compared abortion-related mortality to mortality associated with other outpatient surgical procedures and selected nonmedical activities. We calculated the abortion-related mortality rate during 2000-2009 using national data. We searched PubMed and other sources for contemporaneous data on mortality associated with other outpatient procedures commonly performed on healthy young women, marathon running, bicycling and driving. The abortion-related mortality rate in 2000-2009 in the United States was 0.7 per 100,000 abortions. Studies in approximately the same years found mortality rates of 0.8-1.7 deaths per 100,000 plastic surgery procedures, 0-1.7deaths per 100,000 dental procedures, 0.6-1.2 deaths per 100,000 marathons run and at least 4 deaths among 100,000 cyclists in a large annual bicycling event. The traffic fatality rate per 758 vehicle miles traveled by passenger cars in the United States in 2007-2011 was about equal to the abortion-related mortality rate. The safety of induced abortion as practiced in the United States for the past decade met or exceeded expectations for outpatient surgical procedures and compared favorably to that of two common nonmedical voluntary activities. The new legislation restricting abortion is unnecessary; indeed, by reducing the geographic distribution of abortion providers and requiring women to travel farther for the procedure, these laws are potentially detrimental to women's health. Copyright © 2014 Elsevier Inc. All rights reserved.

  16. Ergonomic design and evaluation of new surgical scissors.

    Science.gov (United States)

    Shimomura, Yoshihiro; Shirakawa, Hironori; Sekine, Masashi; Katsuura, Tetsuo; Igarashi, Tatsuo

    2015-01-01

    The purpose of this study is to design a new surgical scissors handle and determine its effectiveness with various usability indices. A new scissors handle was designed that retains the professional grip but has the shapes of the eye rings modified to fit the thumb and ring finger and finger rests for the index and little finger. The newly designed scissors and traditional scissors were compared by electromyography, subjective evaluation and task performance in experiments using cutting and peeling tasks. The newly designed scissors reduced muscle load in both hand during cutting by the closing action, and reduced the muscle load in the left hand during peeling by the opening action through active use of the right hand. In evaluation by surgeons, task performance improved in addition to the decrease in muscle load. The newly designed scissors used in this study demonstrated high usability. A new scissors handle was designed that has the eye rings modified to fit the thumb and ring finger. The newly designed scissors reduced muscle load and enabled active use of the right hand. In evaluation by surgeons, task performance improved in addition to the decrease in muscle load.

  17. Cost-effectiveness analyses of elective orthopaedic surgical procedures in patients with inflammatory arthropathies

    DEFF Research Database (Denmark)

    Osnes-Ringen, H.; Kvamme, M. K.; Sønbø Kristiansen, Ivar

    2011-01-01

    . The health benefit from surgery was subsequently translated into QALYs. The direct treatment costs in the first year were, for each patient, derived from the hospital's cost per patient accounting system (KOSPA). The costs per QALY were estimated and future costs and benefits were discounted at 4%. Results......Objective: To examine the costs per quality-adjusted life year (QALY) gained for surgical interventions in patients with inflammatory arthropathies, and to compare the costs per QALY gained for replacement versus non-replacement surgical interventions. Methods: In total, 248 patients [mean age 57......: Improvement in utility at 1-year follow-up was 0.10 with EQ-5D and 0.03 with SF-6D (p cost per QALY gained was EUR 5000 for hip replacement surgery (EUR18 600 using SF-6D) and EUR 10 500 (EUR 48 500 using SF-6D) for all replacement procedures. The 5-year cost per QALY was EUR 17...

  18. Large Variability in the Diversity of Physiologically Complex Surgical Procedures Exists Nationwide Among All Hospitals Including Among Large Teaching Hospitals.

    Science.gov (United States)

    Dexter, Franklin; Epstein, Richard H; Thenuwara, Kokila; Lubarsky, David A

    2017-11-22

    Multiple previous studies have shown that having a large diversity of procedures has a substantial impact on quality management of hospital surgical suites. At hospitals with substantial diversity, unless sophisticated statistical methods suitable for rare events are used, anesthesiologists working in surgical suites will have inaccurate predictions of surgical blood usage, case durations, cost accounting and price transparency, times remaining in late running cases, and use of intraoperative equipment. What is unknown is whether large diversity is a feature of only a few very unique set of hospitals nationwide (eg, the largest hospitals in each state or province). The 2013 United States Nationwide Readmissions Database was used to study heterogeneity among 1981 hospitals in their diversities of physiologically complex surgical procedures (ie, the procedure codes). The diversity of surgical procedures performed at each hospital was quantified using a summary measure, the number of different physiologically complex surgical procedures commonly performed at the hospital (ie, 1/Herfindahl). A total of 53.9% of all hospitals commonly performed 3-fold larger diversity (ie, >30 commonly performed physiologically complex procedures). Larger hospitals had greater diversity than the small- and medium-sized hospitals (P 30 procedures (lower 99% CL, 71.9% of hospitals). However, there was considerable variability among the large teaching hospitals in their diversity (interquartile range of the numbers of commonly performed physiologically complex procedures = 19.3; lower 99% CL, 12.8 procedures). The diversity of procedures represents a substantive differentiator among hospitals. Thus, the usefulness of statistical methods for operating room management should be expected to be heterogeneous among hospitals. Our results also show that "large teaching hospital" alone is an insufficient description for accurate prediction of the extent to which a hospital sustains the

  19. Development and evaluation of accessories to improve the posture of veterinary surgeons in surgical procedures conducted in the field

    Directory of Open Access Journals (Sweden)

    V.A.S. Vulcani

    Full Text Available ABSTRACT The study was conducted based on the information collected on rural properties in the state of Goiás, during practical classes of Surgical Clinic in Large Animals at the Veterinary Hospital of the Escola de Veterinária e Zootecnia of the Universidade Federal de Goiás and during the implementation of outreach projects developed by the institution. An acropostite-phimosis surgical procedure in the bulls in the field was selected, lasting over 30 minutes and requiring movements, posture and strength on the part of the surgeon. Devices were proposed and developed to provide improved comfort and safety to surgeons. The first device was a stool to be used by the professional during the execution of the surgical intervention. The use enabled the surgeon to sit down and rest their feet on the ground, reducing knee bending and distributing the support forces in various muscle groups. For the movement restriction of the surgeon, another accessory was developed to support the foreskin of the animal. Made of wood, this other device serves as a support for keeping the foreskin away from the ground and close to the surgeon. Its length, width and thickness established a good relation with the stool height, providing minimal discomfort to the professional. The third device was designed to assist in the immobilization of the animal and increase safety for the patient and surgical team. A fourth accessory was designed to protect the scapular region and avoid the occurrence of injuries in the radial nerve, myopathies and traumas during the rollover or prolonged stay of the animal in lateral decubitus. The choice of the shape, dimensions and softness of the device was mainly based on the weight of the animal. Such devices have proven to be effective, reducing the time of surgery, making cervical and lumbar movement easier, in addition to providing better support to the surgeon, reducing risks of musculoskeletal diseases.

  20. The effects of local nitroglycerin on the surgical delay procedure in prefabricated flaps by vascular implant in rats.

    Science.gov (United States)

    Sá, Jairo Zacchê de; Aguiar, José Lamartine de Andrade; Cruz, Adriana Ferreira; Schuler, Alexandre Ricardo Pereira; Lima, José Ricardo Alves de; Marques, Olga Martins

    2012-12-01

    To evaluate the effect of local nitroglycerin on the viable area of a prefabricated flap for vascular implant in rats, and to investigate the surgical delay procedure. A femoral pedicle was implanted under the skin of the abdominal wall in forty Wistar rats. The animals were divided into four groups of ten: group 1 - without surgical delay procedure and local nitroglycerin; group 2 - with surgical delay procedure, but without local nitroglycerin; group 3 - without surgical delay procedure, but with local nitroglycerin; and group 4 - with simultaneous surgical delay procedure and local nitroglycerin. The percentages of the viable areas, in relation to the total flap, were calculated using AutoCAD R 14. The mean percentage value of the viable area was 8.9% in the group 1. 49.4% in the group 2; 8.4% in the group 3 and 1.1% in the group 4. There was significant difference between groups 1 and 2 (p=0.005), 1 and 4 (p=0.024), 2 and 3 (p=0.003), 2 and 4 (p=0.001). These results support the hypothesis that the closure of the arterial venous channels is responsible for the phenomenon of surgical delay procedure. Local nitroglycerin did not cause an increase in the prefabricated viable flap area by vascular implantation and decreased the viable flap area that underwent delay procedures.

  1. Design, implementation and testing of master slave robotic surgical system

    International Nuclear Information System (INIS)

    Ali, S.A.

    2015-01-01

    The autonomous manipulation of the medical robotics is needed to draw up a complete surgical plan in development. The autonomy of the robot comes from the fact that once the plan is drawn up off-line, it is the servo loops, and only these, that control the actions of the robot online, based on instantaneous control signals and measurements provided by the vision or force sensors. Using only these autonomous techniques in medical and surgical robotics remain relatively limited for two main reasons: Predicting complexity of the gestures, and human Safety. Therefore, Modern research in haptic force feedback in medical robotics is aimed to develop medical robots capable of performing remotely, what a surgeon does by himself. These medical robots are supposed to work exactly in the manner that a surgeon does in daily routine. In this paper the master slave tele-robotic system is designed and implemented with accuracy and stability by using 6DOF (Six Degree of Freedom) haptic force feedback devices. The master slave control strategy, haptic devices integration, application software designing using Visual C++ and experimental setup are considered. Finally, results are presented the stability, accuracy and repeatability of the system. (author)

  2. Design, Implementation and Testing of Master Slave Robotic Surgical System

    Directory of Open Access Journals (Sweden)

    Syed Amjad Ali

    2015-01-01

    Full Text Available The autonomous manipulation of the medical robotics is needed to draw up a complete surgical plan in development. The autonomy of the robot comes from the fact that once the plan is drawn up off-line, it is the servo loops, and only these, that control the actions of the robot online, based on instantaneous control signals and measurements provided by the vision or force sensors. Using only these autonomous techniques in medical and surgical robotics remain relatively limited for two main reasons: Predicting complexity of the gestures, and human Safety. Therefore, Modern research in haptic force feedback in medical robotics is aimed to develop medical robots capable of performing remotely, what a surgeon does by himself. These medical robots are supposed to work exactly in the manner that a surgeon does in daily routine. In this paper the master slave tele-robotic system is designed and implemented with accuracy and stability by using 6DOF (Six Degree of Freedom haptic force feedback devices. The master slave control strategy, haptic devices integration, application software designing using Visual C++ and experimental setup are considered. Finally, results are presented the stability, accuracy and repeatability of the system

  3. The learning effect of intraoperative video-enhanced surgical procedure training.

    Science.gov (United States)

    van Det, M J; Meijerink, W J H J; Hoff, C; Middel, L J; Koopal, S A; Pierie, J P E N

    2011-07-01

    The transition from basic skills training in a skills lab to procedure training in the operating theater using the traditional master-apprentice model (MAM) lacks uniformity and efficiency. When the supervising surgeon performs parts of a procedure, training opportunities are lost. To minimize this intervention by the supervisor and maximize the actual operating time for the trainee, we created a new training method called INtraoperative Video-Enhanced Surgical Training (INVEST). Ten surgical residents were trained in laparoscopic cholecystectomy either by the MAM or with INVEST. Each trainee performed six cholecystectomies that were objectively evaluated on an Objective Structured Assessment of Technical Skills (OSATS) global rating scale. Absolute and relative improvements during the training curriculum were compared between the groups. A questionnaire evaluated the trainee's opinion on this new training method. Skill improvement on the OSATS global rating scale was significantly greater for the trainees in the INVEST curriculum compared to the MAM, with mean absolute improvement 32.6 versus 14.0 points and mean relative improvement 59.1 versus 34.6% (P=0.02). INVEST significantly enhances technical and procedural skill development during the early learning curve for laparoscopic cholecystectomy. Trainees were positive about the content and the idea of the curriculum.

  4. Rates and risk factors of unplanned 30-day readmission following general and thoracic pediatric surgical procedures.

    Science.gov (United States)

    Polites, Stephanie F; Potter, Donald D; Glasgow, Amy E; Klinkner, Denise B; Moir, Christopher R; Ishitani, Michael B; Habermann, Elizabeth B

    2017-08-01

    Postoperative unplanned readmissions are costly and decrease patient satisfaction; however, little is known about this complication in pediatric surgery. The purpose of this study was to determine rates and predictors of unplanned readmission in a multi-institutional cohort of pediatric surgical patients. Unplanned 30-day readmissions following general and thoracic surgical procedures in children readmission per 30 person-days were determined to account for varied postoperative length of stay (pLOS). Patients were randomly divided into 70% derivation and 30% validation cohorts which were used for creation and validation of a risk model for readmission. Readmission occurred in 1948 (3.6%) of 54,870 children for a rate of 4.3% per 30 person-days. Adjusted predictors of readmission included hepatobiliary procedures, increased wound class, operative duration, complications, and pLOS. The predictive model discriminated well in the derivation and validation cohorts (AUROC 0.710 and 0.701) with good calibration between observed and expected readmission events in both cohorts (p>.05). Unplanned readmission occurs less frequently in pediatric surgery than what is described in adults, calling into question its use as a quality indicator in this population. Factors that predict readmission including type of procedure, complications, and pLOS can be used to identify at-risk children and develop prevention strategies. III. Copyright © 2017 Elsevier Inc. All rights reserved.

  5. Postoperative pain in complex ophthalmic surgical procedures: comparing practice with guidelines.

    Science.gov (United States)

    Lesin, Mladen; Sundov, Zeljka Duplancic; Jukic, Marko; Puljak, Livia

    2014-06-01

    To analyze the management of postoperative pain after complex ophthalmic surgery and to compare it to the guidelines. A retrospective study. University Hospital Split, Croatia. Patients (N = 447) who underwent complex ophthalmic surgical procedures from 2008 to 2012. The following data were extracted from patient medical records: age, gender, type and dosage of premedication, preoperative patient's physical status, type of procedure, duration of procedure-surgical and anesthesia time, type and dosage of anesthesia, the type and dosage of postoperative analgesia for each postoperative day. None of the patients had information about pain intensity in their records. There were 90% patients who did not receive any medication the night before surgery, 54% did not receive any premedication immediately before surgery, 19% did not receive any pain medication after the surgery in the operating room and 46% of patients did not receive any analgesics after being released to the ophthalmology department. Among those who received analgesia after surgery, 98% received only one dose of an analgesic, and 93% of patients received analgesia only on the day of the surgery. Furthermore, patients were returned to the department immediately after surgery, without intensive monitoring. During the analyzed five years there were no educational session organized by anesthesiologist to the ophthalmic surgeons. Postoperative pain management and perioperative care of patients undergoing major ophthalmic surgery indicates lack of attention towards pain intensity and postoperative analgesia. Appropriate interventions should be employed to improve postoperative pain management, to facilitate patient recovery. Wiley Periodicals, Inc.

  6. Surgical Procedures for BPH/LUTS: Impact on Male Sexual Health.

    Science.gov (United States)

    Becher, Edgardo F; McVary, Kevin T

    2014-01-01

    Lower urinary tract symptoms (LUTS) because of benign prostatic hyperplasia (BPH) are a highly prevalent condition in men over 50 years old, and their incidence increases with age. The relationship between LUTS and erectile dysfunction (ED) has received increased attention recently because both diseases are highly prevalent, frequently co-associated in the same aging male group, and contribute significantly to the overall quality of life. In this review, we will examine the literature to assess the impact of surgical and minimally invasive treatments for LUTS/BPH on the male's sexual health. The impact of the various surgical and minimally invasive treatments for LUTS/BPH was reviewed to ascertain the impact on erectile and ejaculatory function. Sexual side effects of treatment for LUTS/BPH are underappreciated by urologists but likely play a prominent role in patient decision making, creating a disparity between provider and patient. Almost all accepted therapies for LUTS (surgical or medical) can affect some aspect of sexual health, making it imperative that health-care professionals understand their patients' concerns and motivations in these two linked diseases. The incidence of newly diagnosed postoperative ED in patients treated with monopolar transurethral resection (TURP) is around 14%, with reported values in various studies ranging from 0-32.5%, 7.7%, 6.5%, 17%, to 14%. Importantly, there is no significant difference reported between bipolar and monopolar TURP on sexual function. The risk of sexual side effects is an important one to consider in discussing the implications for any LUTS intervention as they play a prominent role in patient motivation, acceptance of bother and decision making concerning surgical intervention, thus creating a potential disparity between provider and patient. Becher EF and McVary KT. Surgical procedures for BPH/LUTS: Impact on male sexual health. Sex Med Rev 2014;2:47-55. Copyright © 2014 International Society for Sexual

  7. The increasing number of surgical procedures for female genital fistula in England: analysis of Hospital Episode Statistics (HES) data.

    Science.gov (United States)

    Ismail, S I M F

    2015-01-01

    The aim of this study was to describe the number and trend of surgical procedures for female genital fistula in England. An online search of Hospital Episode Statistics (HES) data was carried out. Data were available for the 4-year period from 2002-03 until 2005-06. The total number of surgical procedures carried out for female genital fistula steadily increased by 28.7% from 616 in 2002-03 to 793 in 2005-06. The number of surgical procedures performed for rectovaginal fistula exceeded the total number of surgical procedures carried out for vesicovaginal and urethrovaginal fistula in each year of the study period. This pattern needs to be monitored and investigated further.

  8. Allergy to local and general anesthetics and to other drugs during surgical procedures

    OpenAIRE

    Ortega, María Claudia; Hospital Universitario San Ignacio; López, Santiago; Hospital Infantil Los Ángeles; Morato, Fabio F.; Hospital de Clínicas, São Paulo, Brasil; Kase Tanno, Luciana; Hospital de Clínicas, São Paulo, Brasil; Ensina, Luis Felipe C.; Hospital de Clínicas, São Paulo, Brasil

    2010-01-01

    Shock and hypersensitivity reactions to local and general anesthetics and to other drugs used during surgical procedures continue being a challenge in clinical practice. Allergic hypersensitivity can vary in presentation and intensity and might manifest itself from mild cutaneous symptoms to death. Las reacciones de choque e hipersensibilidad a los anestésicos locales y generales y a otros medicamentos utilizados durante los procedimientos quirúrgicos, continúan siendo un reto en la prácti...

  9. Acceptance and Divergence from Engineering Design Procedures Implicating Knowledge Flow

    DEFF Research Database (Denmark)

    Jensen, Ole Kjeldal; Ahmed, Saeema

    2009-01-01

    of explicit procedures and; 3) implicit procedures supporting needs that are not catered for by the explicit procedures. In this understanding, a procedure can be any kind of method, tool or framework used to support design engineers. Furthermore, the study discusses a variety of recommended actions......When developing procedures such as tools, methods and frameworks to support the development of new products, one of the challenges is ensuring their successful implementation. This paper describes a study of the development and use of such design-procedures with primary focus on the new product...

  10. Inferior vena cava filter penetration following Whipple surgical procedure causing ureteral injury.

    Science.gov (United States)

    Abdel-Aal, Ahmed Kamel; Ezzeldin, Islam B; Moustafa, Amr Soliman; Ertel, Nathan; Oser, Rachel

    2015-12-01

    We report a case of an indwelling inferior vena cava filter that penetrated the IVC wall after Whipple's pancreatico-duodenectomy procedure performed in a patient with ampullary carcinoma, resulting in right ureteral injury and obstruction with subsequent hydroureter and hydronephrosis. This was incidentally discovered on a computed tomography scan performed as routine follow up to evaluate the results of the surgery. We retrieved the inferior vena cava filter and placed a nephrostomy catheter to relieve the ureteral obstruction. Our case highlights the importance of careful inferior vena cava manipulation during abdominal surgery in the presence of an inferior vena cava filter, and the option of temporary removal of the filter to be placed again after surgery in order to avoid this complication, unless protection is required against clot migration during the surgical procedure.

  11. Single visit surgery for pediatric ambulatory surgical procedures: a satisfaction and cost analysis.

    Science.gov (United States)

    Olson, Jacob K; Deming, Lisa A; King, Denis R; Rager, Terrence M; Gartner, Sarah; Huibregtse, Natalie; Moss, R Lawrence; Besner, Gail E

    2017-10-10

    Single visit surgery (SVS) consists of same-day pre-operative assessment and operation with telephone post-operative follow-up. This reduces family time commitment to 1 hospital trip rather than 2-3. We began SVS for ambulatory patients with clear surgical indications in 2013. We sought to determine family satisfaction, cost savings to families, and institutional financial feasibility of SVS. SVS patients were compared to age/case matched conventional surgery (CS) patients. Satisfaction was assessed by post-operative telephone survey. Family costs were calculated as the sum of lost revenue (based on median income) and transportation costs ($0.50/mile). Satisfaction was high in both groups (98% for SVS vs. 93% for CS; p=0.27). 40% of CS families indicated that they would have preferred SVS, whereas no SVS families indicated preference for the CS option (p<0.001). Distance from the hospital did not correlate with satisfaction. Estimated cost savings for an SVS family was $188. Reimbursement, hospital and physician charges, and day-of-surgery cancellation rates were similar. SVS provides substantial cost savings to families while maintaining patient satisfaction and equivalent institutional reimbursement. SVS is an effective approach to low-risk ambulatory surgical procedures that is less disruptive to families, facilitates access to pediatric surgical care, and reduces resource utilization. Cost Effectiveness Study. Level II. Copyright © 2017 Elsevier Inc. All rights reserved.

  12. Trends in Hospital Admission and Surgical Procedures Following ED visits for Diverticulitis

    Directory of Open Access Journals (Sweden)

    Margaret B. Greenwood-Ericksen

    2016-06-01

    Full Text Available Introduction: Diverticulitis is a common diagnosis in the emergency department (ED. Outpatient management of diverticulitis is safe in selected patients, yet the rates of admission and surgical procedures following ED visits for diverticulitis are unknown, as are the predictive patient characteristics. Our goal is to describe trends in admission and surgical procedures following ED visits for diverticulitis, and to determine which patient characteristics predict admission. Methods: We performed a cross-sectional descriptive analysis using data on ED visits from 2006-2011 to determine change in admission and surgical patterns over time. The Nationwide Emergency Department Sample database, a nationally representative administrative claims dataset, was used to analyze ED visits for diverticulitis. We included patients with a principal diagnosis of diverticulitis (ICD-9 codes 562.11, 562.13. We analyzed the rate of admission and surgery in all admitted patients and in low-risk patients, defined as age <50 with no comorbidities (Elixhauser. We used hierarchical multivariate logistic regression to identify patient characteristics associated with admission for diverticulitis. Results: From 2006 to 2011 ED visits for diverticulitis increased by 21.3% from 238,248 to 302,612, while the admission rate decreased from 55.7% to 48.5% (-7.2%, 95% CI [–7.78 to -6.62]; p<0.001 for trend. The admission rate among low-risk patients decreased from 35.2% in 2006 to 26.8% in 2011 (-8.4%, 95% CI [–9.6 to –7.2]; p<0.001 for trend. Admission for diverticulitis was independently associated with male gender, comorbid illnesses, higher income and commercial health insurance. The surgical rate decreased from 6.5% in 2006 to 4.7% in 2011 (-1.8%, 95% CI [–2.1 to –1.5]; p<0.001 for trend, and among low-risk patients decreased from 4.0% to 2.2% (- 1.8%, 95% CI [–4.5 to –1.7]; p<0.001 for trend. Conclusion: From 2006 to 2011 ED visits for diverticulitis increased

  13. Mixture design procedure for flexible base.

    Science.gov (United States)

    2013-04-01

    This document provides information on mixture design requirements for a flexible base course. Sections : design requirements, job mix formula, contractor's responsibility, and engineer's responsibility. Tables : material requirements; requirements fo...

  14. [Influence of postoperative pelvic floor function on different surgical procedures of hysterectomy].

    Science.gov (United States)

    Tan, A L; Hong, L; Zhao, Y Z; Jiang, L

    2017-05-25

    Objective: To compare the influence of postoperative pelvic floor function after different surgical procedures of hysterectomy. Methods: A total of 260 patients who underwent hysterectomy in Renmin hospital of Wuhan University from January 2012 to January 2014 were enrolled in the study, and divided into 5 groups by different surgical procedures, which were total abdominal hysterectomy (A-TH; 46 cases), total laparoscopic hysterectomy (L-TH; 59 cases), total vaginal hysterectomy (V-TH; 42 cases), abdominal intrafascial hysterectomy (A-CISH; 78 cases), laparoscopic intrafascial hysterectomy (L-CISH; 35 cases). Pelvic examination, pelvic organ prolapse quantitation (POP-Q), test of pelvic muscle strength, pelvic floor distress inventory-short form 20 (PFDI-20) and the female sexual function index (FSFI) questionnaire were measured after 6 months and 12 months. Results: The differences of pelvic organ prolapse incidence after 6 months, A-TH and A-CISH [7% (3/46) versus 3% (2/78)], A-TH and L-CISH [7% (3/46) versus 3% (1/35)] were statistically significance (all P CISH was statistically different in degree ( P CISH [59% (27/46) versus 29% (23/78)], A-TH and L-CISH [59% (27/46) versus 26% (9/35)] were statistically significant (all P CISH [61% (36/59) versus 29%(23/78)] was statistically different ( P CISH [53% (31/59) verus 24% (19/78)], V-TH and A-CISH [60% (25/42) verus 24% (19/78)], V-TH and L-CISH [60% (25/42) verus 23% (8/35)] were statistically significant (all P CISH [57% (24/42) versus 26%(20/78)] was statistically significant ( P 0.05), PFDI-20 total score was not statistically significant ( P >0.05). FSFI total score after 6 months and 12 months in A-TH and A-CISH, L-TH and A-CISH, A-CISH and L-CISH were statistically significant (all P <0.05). Conclusion: The influences of different surgical procedures to pelvic floor function are no statistical difference; as to the surgical resection of hysterectomy, intrafascia hysterectomy compared with extrafascia

  15. Current Techniques of Teaching and Learning in Bariatric Surgical Procedures: A Systematic Review.

    Science.gov (United States)

    Kaijser, Mirjam; van Ramshorst, Gabrielle; van Wagensveld, Bart; Pierie, Jean-Pierre

    The gastric sleeve resection and gastric bypass are the 2 most commonly performed bariatric procedures. This article provides an overview of current teaching and learning methods of those techniques in resident and fellow training. A database search was performed on Pubmed, Embase, and the Education Resources Information Center (ERIC) to identify the methods used to provide training in bariatric surgery worldwide. After exclusion based on titles and abstracts, full texts of the selected articles were assessed. Included articles were reviewed using the Grading of Recommendations Assessment, Development and Evaluation (GRADE) system. In total, 2442 titles were identified and 14 full text articles met inclusion criteria. Four publications described an ex vivo training course, and 6 focused on at least 1 step of the gastric bypass procedure. Two randomized controlled trials (RCT) provided high-quality evidence on training aspects. Surgical coaching caused significant improvement of Bariatric Objective Structured Assessment of Technical Skills (BOSATS) scores (3.60 vs. 3.90, p = 0.017) and reduction of technical errors (18 vs. 10, p = 0.003). A preoperative warm-up increased global rating scales (GRS) scores on depth perception (p = 0.02), bimanual dexterity (p = 0.01), and efficiency of movements (p = 0.03). Stepwise education, surgical coaching, warming up, Internet-based knowledge modules, and ex vivo training courses are effective in relation to bariatric surgical training of residents and fellows, possibly shortening their learning curves. Copyright © 2018 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

  16. Cost-consequence analysis of different active flowable hemostatic matrices in cardiac surgical procedures.

    Science.gov (United States)

    Makhija, D; Rock, M; Xiong, Y; Epstein, J D; Arnold, M R; Lattouf, O M; Calcaterra, D

    2017-06-01

    A recent retrospective comparative effectiveness study found that use of the FLOSEAL Hemostatic Matrix in cardiac surgery was associated with significantly lower risks of complications, blood transfusions, surgical revisions, and shorter length of surgery than use of SURGIFLO Hemostatic Matrix. These outcome improvements in cardiac surgery procedures may translate to economic savings for hospitals and payers. The objective of this study was to estimate the cost-consequence of two flowable hemostatic matrices (FLOSEAL or SURGIFLO) in cardiac surgeries for US hospitals. A cost-consequence model was constructed using clinical outcomes from a previously published retrospective comparative effectiveness study of FLOSEAL vs SURGIFLO in adult cardiac surgeries. The model accounted for the reported differences between these products in length of surgery, rates of major and minor complications, surgical revisions, and blood product transfusions. Costs were derived from Healthcare Cost and Utilization Project's National Inpatient Sample (NIS) 2012 database and converted to 2015 US dollars. Savings were modeled for a hospital performing 245 cardiac surgeries annually, as identified as the average for hospitals in the NIS dataset. One-way sensitivity analysis and probabilistic sensitivity analysis were performed to test model robustness. The results suggest that if FLOSEAL is utilized in a hospital that performs 245 mixed cardiac surgery procedures annually, 11 major complications, 31 minor complications, nine surgical revisions, 79 blood product transfusions, and 260.3 h of cumulative operating time could be avoided. These improved outcomes correspond to a net annualized saving of $1,532,896. Cost savings remained consistent between $1.3m and $1.8m and between $911k and $2.4m, even after accounting for the uncertainty around clinical and cost inputs, in a one-way and probabilistic sensitivity analysis, respectively. Outcome differences associated with FLOSEAL vs SURGIFLO

  17. Oral Surgical Procedures Performed Safely in Patients With Head and Neck Arteriovenous Malformations: A Retrospective Case Series of 12 Patients.

    Science.gov (United States)

    Karim, Abdul Basit; Lindsey, Sean; Bovino, Brian; Berenstein, Alejandro

    2016-02-01

    This case series describes patients with head and neck arteriovenous malformations who underwent oral and maxillofacial surgical procedures combined with interventional radiology techniques to minimize blood loss. Twelve patients underwent femoral cerebral angiography to visualize the extent of vascular malformation. Before the surgical procedures, surgical sites were devascularized by direct injection of hemostatic or embolic agents. Direct puncture sclerotherapy at the base of surgical sites was performed using Surgiflo or n-butylcyanoacrylate glue. Surgical procedures were carried out in routine fashion. A hemostatic packing of FloSeal, Gelfoam, and Avitene was adapted to the surgical sites. Direct puncture sclerotherapy with Surgiflo or n-butylcyanoacrylate glue resulted in minimal blood loss intraoperatively. Local application of the FloSeal, Gelfoam, and Avitene packing sustained hemostasis and produced excellent healing postoperatively. Patients with arteriovenous malformations can safely undergo routine oral and maxillofacial surgical procedures with minimal blood loss when appropriate endovascular techniques and local hemostatic measures are used by the interventional radiologist and oral and maxillofacial surgeon. Copyright © 2016 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  18. FFTF fuel pin design procedure verification for transient operation

    International Nuclear Information System (INIS)

    Baars, R.E.

    1975-05-01

    The FFTF design procedures for evaluating fuel pin transient performance are briefly reviewed, and data where available are compared with design procedure predictions. Specifically, burst conditions derived from Fuel Cladding Transient Tester (FCTT) tests and from ANL loss-of-flow tests are compared with burst pressures computed using the design procedure upon which the cladding integrity limit was based. Failure times are predicted using the design procedure for evaluation of rapid reactivity insertion accidents, for five unterminated TREAT experiments in which well characterized fuel failures were deliberately incurred. (U.S.)

  19. Paediatric minor oral surgical procedures under inhalation sedation and general anaesthetic: a comparison of variety and duration of treatment.

    Science.gov (United States)

    Foley, J

    2008-03-01

    To develop baseline data in relation to paediatric minor oral surgical procedures undertaken with both general anaesthesia and nitrous oxide inhalation sedation within a Hospital Dental Service. Data were collected prospectively over a three-year period from May 2003 to June 2006 for patients attending the Departments of Paediatric Dentistry, Dundee Dental Hospital and Ninewells Hospital, NHS Tayside, Great Britain, for all surgical procedures undertaken with either inhalation sedation or general anaesthetic. Both operator status and the procedure being undertaken were noted. In addition, the operating time was recorded. Data for 166 patients (F: 102; M: 64) with a median age of 12.50 (inter-quartile range 10.00, 14.20) years showed that 195 surgical procedures were undertaken. Of these 160 and 35 were with general anaesthetic and sedation respectively. The surgical removal of impacted, carious and supernumerary unit(s) accounted for 53.8% of all procedures, whilst the exposure of impacted teeth and soft tissue surgery represented 34.9% and 11.3% of procedures respectively. The median surgical time for techniques undertaken with sedation was 30.00 (inter-quartile range 25.00, 43.50) minutes whilst that for general anaesthetic was similar at 30.00 (inter-quartile range 15.25, 40.00) minutes (not statistically significant, (Mann Whitney U, W = 3081.5, P = 0.331). The majority of paediatric minor oral surgical procedures entail surgical exposure or removal of impacted teeth. The median treatment time for most procedures undertaken with either general anaesthetic or nitrous oxide sedation was 30 minutes.

  20. General and acute care surgical procedures in patients with left ventricular assist devices.

    Science.gov (United States)

    Arnaoutakis, George J; Bittle, Gregory J; Allen, Jeremiah G; Weiss, Eric S; Alejo, Jennifer; Baumgartner, William A; Shah, Ashish S; Wolfgang, Christopher L; Efron, David T; Conte, John V

    2014-04-01

    Left ventricular assist devices (LVADs) have become common as a bridge to heart transplant as well as destination therapy. Acute care surgical (ACS) problems in this population are prevalent but remain ill-defined. Therefore, we reviewed our experience with ACS interventions in LVAD patients. A total of 173 patients who received HeartMate(®) XVE or HeartMate(®) II (HMII) LVADs between December 2001 and March 2010 were studied. Patient demographics, presentation of ACS problem, operative intervention, co-morbidities, transplantation, complications, and survival were analyzed. A total of 47 (27 %) patients underwent 67 ACS procedures at a median of 38 days after device implant (interquartile range 15-110), with a peri-operative mortality rate of 5 % (N = 3). Demographics, device type, and acuity were comparable between the ACS and non-ACS groups. A total of 21 ACS procedures were performed emergently, eight were urgent, and 38 were elective. Of 29 urgent and emergent procedures, 28 were for abdominal pathology. In eight patients, the cause of the ACS problem was related to LVADs or anticoagulation. Cumulative survival estimates revealed no survival differences if patients underwent ACS procedures (p = 0.17). Among HMII patients, transplantation rates were unaffected by an ACS intervention (p = 0.2). ACS problems occur frequently in LVAD patients and are not associated with adverse outcomes in HMII patients. The acute care surgeon is an integral member of a comprehensive approach to effective LVAD management.

  1. The failure of retrograde autologous priming of the cardiopulmonary bypass circuit to reduce blood use after cardiac surgical procedures.

    Science.gov (United States)

    Murphy, Glenn S; Szokol, Joseph W; Nitsun, Martin; Alspach, David A; Avram, Michael J; Vender, Jeffery S; Votapka, Timothy V; Rosengart, Todd K

    2004-05-01

    Hemodilution during cardiopulmonary bypass (CPB) is a primary risk factor for blood transfusion in cardiac surgical patients. Priming of the CPB circuit with the patients' own blood (retrograde autologous priming, RAP) is a technique used to limit hemodilution and reduce transfusion requirements. We designed this study to examine the impact of RAP on perioperative blood product use. Using a retrospective cohort study design, the medical records of all patients undergoing CPB (excluding circulatory arrest cases) by a single surgeon were examined. Data were collected over a 24-mo period when RAP was routinely used as a blood conservation strategy (RAP group, n = 257). This group was compared with a cohort of patients during the 24 mo immediately preceding the introduction of RAP into clinical practice (no RAP group, n = 288). A small, statistically insignificant reduction in the percentage of patients receiving packed red blood cells was observed in the RAP group (44% versus 51% no RAP, P = 0.083). No differences were found between the groups in the number of units of packed red blood cells, platelets, or fresh frozen plasma transfused throughout the perioperative period. These results suggest that overall, RAP does not offer a clinically important benefit as a blood conservation technique. Priming of the cardiopulmonary bypass circuit with the patients' own blood (retrograde autologous priming) resulted in insignificant reductions in blood use in a large, unselected group of patients undergoing cardiac surgical procedures.

  2. Safety and efficacy of immediate postoperative feeding and bowel stimulation to prevent ileus after major gynecologic surgical procedures.

    Science.gov (United States)

    Fanning, James; Hojat, Rod

    2011-08-01

    Postoperative ileus is a major complication of abdominal surgical procedures To evaluate the incidence of ileus and gastrointestinal morbidity in patients who received immediate postoperative feeding and bowel stimulation after undergoing major gynecologic surgical procedures. During a 5-year period, the authors tracked demographic, surgical outcome, and follow-up information for 707 patients who underwent major gynecologic operations. All patients received the same postoperative orders, including immediate feeding of a diet of choice and bowel stimulation with 30 mL of magnesium hydroxide (milk of magnesia) twice daily until bowel movements occurred. Of 707 patients, 6 (<1%) had postoperative ileus. No patients experienced postoperative bowel obstruction and 2 patients (0.3%) had postoperative intestinal leak. No serious adverse effects associated with bowel stimulation were reported. Immediate postoperative feeding and bowel stimulation is a safe and effective approach to preventing ileus in patients who undergo major gynecologic surgical procedures.

  3. "They Have to Adapt to Learn": Surgeons' Perspectives on the Role of Procedural Variation in Surgical Education.

    Science.gov (United States)

    Apramian, Tavis; Cristancho, Sayra; Watling, Chris; Ott, Michael; Lingard, Lorelei

    2016-01-01

    Clinical research increasingly acknowledges the existence of significant procedural variation in surgical practice. This study explored surgeons' perspectives regarding the influence of intersurgeon procedural variation on the teaching and learning of surgical residents. This qualitative study used a grounded theory-based analysis of observational and interview data. Observational data were collected in 3 tertiary care teaching hospitals in Ontario, Canada. Semistructured interviews explored potential procedural variations arising during the observations and prompts from an iteratively refined guide. Ongoing data analysis refined the theoretical framework and informed data collection strategies, as prescribed by the iterative nature of grounded theory research. Our sample included 99 hours of observation across 45 cases with 14 surgeons. Semistructured, audio-recorded interviews (n = 14) occurred immediately following observational periods. Surgeons endorsed the use of intersurgeon procedural variations to teach residents about adapting to the complexity of surgical practice and the norms of surgical culture. Surgeons suggested that residents' efforts to identify thresholds of principle and preference are crucial to professional development. Principles that emerged from the study included the following: (1) knowing what comes next, (2) choosing the right plane, (3) handling tissue appropriately, (4) recognizing the abnormal, and (5) making safe progress. Surgeons suggested that learning to follow these principles while maintaining key aspects of surgical culture, like autonomy and individuality, are important social processes in surgical education. Acknowledging intersurgeon variation has important implications for curriculum development and workplace-based assessment in surgical education. Adapting to intersurgeon procedural variations may foster versatility in surgical residents. However, the existence of procedural variations and their active use in surgeons

  4. Statistical design of mass spectrometry calibration procedures

    International Nuclear Information System (INIS)

    Bayne, C.K.

    1996-11-01

    The main objective of this task was to agree on calibration procedures to estimate the system parameters (i.e., dead-time correction, ion-counting conversion efficiency, and detector efficiency factors) for SAL's new Finnigan MAT-262 mass spectrometer. SAL will use this mass spectrometer in a clean-laboratory which was opened in December 1995 to measure uranium and plutonium isotopes on environmental samples. The Finnigan MAT-262 mass spectrometer has a multi-detector system with seven Faraday cup detectors and one ion- counter for the measurement of very small signals (e.g. 10 -17 Ampere range). ORNL has made preliminary estimates of the system parameters based on SAL's experimental data measured in late 1994 when the Finnigan instrument was relatively new. SAL generated additional data in 1995 to verify the calibration procedures for estimating the dead-time correction factor, the ion-counting conversion factor and the Faraday cup detector efficiency factors. The system parameters estimated on the present data will have to be reestablished when the Finnigan MAT-262 is moved-to the new clean- laboratory. Different methods will be used to analyzed environmental samples than the current measurement methods being used. For example, the environmental samples will be electroplated on a single filament rather than using the current two filament system. An outline of the calibration standard operating procedure (SOP) is included

  5. The application of surgical procedure manager (SPM): first experience with FESS.

    Science.gov (United States)

    Feige, Katharina; Gollnick, Iris; Schmitz, Pia; Strauss, Gero

    2017-09-01

    In our hypothesis, the newly developed program SPM (surgical procedure manager) will ensure successful standardization and efficiency of the FESS (functional endoscopic sinus surgery) and therefore make a decisive contribution in terms of economization and improvement of intraoperative quality. Between 27th March 2015 and 8th October 2015, data from 259 FESS procedures were collected using the SPM. The study took place at the surgical desk, an operating room in the ACQUA clinic in Leipzig, Germany. 233 FESS (90%) of the total FESS (n = 259, 100%) were conducted entirely with SPM. 26 SPM terminations (10%) of 259 FESS remain, which are classified as actual SPM terminations-when the surgeon intentionally stops the SPM. The maximum time slot decreased clearly from 1 h 39 min (period A) to 1 h 10 min (period B). A time reduction can also be seen with the minimum duration of 13.5 min compared to 11 min. The variability of the time slot also decreases since the standard deviation is reduced by 4.5 min. On the basis of available recordings it can be postulated that the application of SPM is suitable for standardization for FESS. Standardization by means of SPM and minimal development can be recognized over a period of time. The SPM makes it possible to transfer the general advantages of mechanization on a concrete FESS and do not influence the medical processes nor even restrict the medical freedom. The users are still entirely free in the implementation of the respective procedure.

  6. Virtual Whipple: preoperative surgical planning with volume-rendered MDCT images to identify arterial variants relevant to the Whipple procedure.

    Science.gov (United States)

    Brennan, Darren D; Zamboni, Giulia; Sosna, Jacob; Callery, Mark P; Vollmer, Charles M V; Raptopoulos, Vassilios D; Kruskal, Jonathan B

    2007-05-01

    The purposes of this study were to combine a thorough understanding of the technical aspects of the Whipple procedure with advanced rendering techniques by introducing a virtual Whipple procedure and to evaluate the utility of this new rendering technique in prediction of the arterial variants that cross the anticipated surgical resection plane. The virtual Whipple is a novel technique that follows the complex surgical steps in a Whipple procedure. Three-dimensional reconstructed angiographic images are used to identify arterial variants for the surgeon as part of the preoperative radiologic assessment of pancreatic and ampullary tumors.

  7. 40 CFR 240.202-2 - Recommended procedures: Design.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Design. 240... § 240.202-2 Recommended procedures: Design. (a) Whenever possible, thermal processing facilities should be located in areas zoned for industrial use and having adequate utilities to serve the facility. (b...

  8. Cognitive Outcomes of Cardiovascular Surgical Procedures in the Old: An Important but Neglected Area.

    Science.gov (United States)

    Keage, Hannah A D; Smith, Ashleigh; Loetscher, Tobias; Psaltis, Peter

    2016-12-01

    Older individuals can now undergo invasive cardiovascular procedures without serious concern about mortality, and the numbers and proportions of the over 65s and 85s doing so in Australia has been increasing over the last 20 years. There is overwhelming evidence linking cardiovascular conditions to late-life (65 years and over) cognitive impairment and dementia including Alzheimer's Disease, primarily due to impaired cerebrovascularisation and cascading neuropathological processes. Somewhat paradoxically, these cardiovascular interventions, carried out with the primary aim of revascularisation, are not usually associated with short- or long-term improvements in cognitive function in older adults. We discuss factors associated with cognitive outcomes post-cardiovascular surgeries in patients over 65 years of age. There are many opportunities for future research: we know almost nothing about cognitive outcomes following invasive cardiac procedures in the oldest old (85 years and over) nor how to predict the cognitive/delirium outcome using pre-surgical data, and lastly, intervention opportunities exist both pre and postoperatively that have not been tested. As our population ages with increased cardiovascular burden and rates of cardiovascular interventions and surgeries, it is critical that we understand the cognitive consequences of these procedures, who is at greatest risk, and ways to optimise cognition. Copyright © 2016. Published by Elsevier B.V.

  9. Efficacy of Negative Pressure Wound Treatment in Preventing Surgical Site Infections after Whipple Procedures.

    Science.gov (United States)

    Gupta, Ryan; Darby, Geoffrey C; Imagawa, David K

    2017-10-01

    Surgical site infections (SSIs) occur at an average rate of 21.1 per cent after Whipple procedures per NSQIP data. In the setting of adherence to standard National Surgery Quality Improvement Program (NSQIP) Hepatopancreatobiliary recommendations including wound protector use and glove change before closing, this study seeks to evaluate the efficacy of using negative pressure wound treatment (NPWT) over closed incision sites after a Whipple procedure to prevent SSI formation. We retrospectively examined consecutive patients from January 2014 to July 2016 who met criteria of completing Whipple procedures with full primary incision closure performed by a single surgeon at a single institution. Sixty-one patients were included in the study between two cohorts: traditional dressing (TD) (n = 36) and NPWT dressing (n = 25). There was a statistically significant difference (P = 0.01) in SSI formation between the TD cohort (n = 15, SSI rate = 0.41) and the NPWT cohort (n = 3, SSI rate = 0.12). The adjusted odds ratio (OR) of SSI formation was significant for NPWT use [OR = 0.15, P = 0.036] and for hospital length of stay [OR = 1.21, P = 0.024]. Operative length, operative blood loss, units of perioperative blood transfusion, intraoperative gastrojejunal tube placement, preoperative stent placement, and postoperative antibiotic duration did not significantly impact SSI formation (P > 0.05).

  10. Application of a Compact High-Definition Exoscope for Illumination and Magnification in High-Precision Surgical Procedures.

    Science.gov (United States)

    Krishnan, Kartik G; Schöller, Karsten; Uhl, Eberhard

    2017-01-01

    The basic necessities for surgical procedures are illumination, exposure, and magnification. These have undergone transformation in par with technology. One of the recent developments is the compact magnifying exoscope system. In this report, we describe the application of this system for surgical operations and discuss its advantages and pitfalls. We used the ViTOM exoscope mounted on the mechanical holding arm. The following surgical procedures were conducted: lumbar and cervical spinal canal decompression (n = 5); laminotomy and removal of lumbar migrated disk herniations (n = 4); anterior cervical diskectomy and fusion (n = 1); removal of intraneural schwannomas (n = 2); removal of an acute cerebellar hemorrhage (n = 1); removal of a parafalcine atypical cerebral hematoma caused by a dural arteriovenous fistula (n = 1); and microsutures and anastomoses of a nerve (n = 1), an artery (n = 1), and veins (n = 2). The exoscope offered excellent, magnified, and brilliantly illuminated high-definition images of the surgical field. All surgical operations were successfully completed. The main disadvantage was the adjustment and refocusing using the mechanical holding arm. The time required for the surgical operation under the exoscope was slightly longer than the times required for a similar procedure performed using an operating microscope. The magnifying exoscope is an effective and nonbulky tool for surgical procedures. In visualization around the corners, the exoscope has better potential than a microscope. With technical and technologic modifications, the exoscope might become the next generation in illumination, visualization, exposure, and magnification for high-precision surgical procedures. Copyright © 2016 Elsevier Inc. All rights reserved.

  11. Influence of the revision of surgical fee schedule on surgeons' productivity in Japan: A cohort analysis of 7602 surgical procedures in 2013-2016.

    Science.gov (United States)

    Nakata, Yoshinori; Watanabe, Yuichi; Narimatsu, Hiroto; Yoshimura, Tatsuya; Otake, Hiroshi; Sawa, Tomohiro

    2018-02-01

    The goal of this study is to evaluate the pure impact of the revision of surgical fee schedule on surgeons' productivity. We collected data from the surgical procedures performed by the surgeons working in Teikyo University Hospital from 1 April through 30 September in 2013-2016. We employed non-radial and non-oriented Malmquist model. We defined the decision-making unit as a surgeon with the highest academic rank in surgery. Inputs were defined as (1) the number of doctors who assisted surgery and (2) the time of surgical operation. The output was defined as the surgical fee for each surgery. We focused on the revisions in 2014 and 2016. We first calculated each surgeon's natural logarithms of the changes in productivity, technique and efficiency in 2013-2014, in 2014-2015 and in 2015-2016. Then, we subtracted the changes in 2014-2015 from the changes in 2013-2014 and in 2015-2016. We analyzed 62 surgeons who performed 7602 surgical procedures. The productivity changes were not significantly different from 0. Their efficiency change was significantly greater than 0, while their technical change was smaller than 0 in revision 2014. Their efficiency change was significantly smaller than 0, while their technical change was greater than 0 in revision 2016 (p increase overall productivity through revision if we could increase both efficiency and technique.

  12. Clinical Application of Diode Laser (980 nm) in Maxillofacial Surgical Procedures.

    Science.gov (United States)

    Aldelaimi, Tahrir N; Khalil, Afrah A

    2015-06-01

    For many procedures, lasers are now becoming the treatment of choice by both clinicians and patients, and in some cases, the standard of care. This clinical study was carried out at Department of Maxillofacial Surgery, Ramadi Teaching Hospital, Rashid Private Hospital and Razi Private Hospital, Anbar Health Directorate, Anbar Province, Iraq. A total of 32 patients including 22 (≈ 70%) male and 10 (≈ 30%) female with age range from 5 months to 34 years old. Chirolas 20 W diode laser emitting at 980 nm was used. Our preliminary clinical findings include sufficient hemostasis, coagulation properties, precise incision margin, lack of swelling, bleeding, pain, scar tissue formation and overall satisfaction were observed in the clinical application. The clinical application of the diode (980 nm) laser in maxillofacial surgery proved to be of beneficial effect for daily practice and considered practical, effective, easy to used, offers a safe, acceptable, and impressive alternative for conventional surgical techniques.

  13. The effect of aromatherapy on postoperative nausea in women undergoing surgical procedures.

    Science.gov (United States)

    Ferruggiari, Luisa; Ragione, Barbara; Rich, Ellen R; Lock, Kathleen

    2012-08-01

    Postoperative nausea and vomiting (PONV) is a common source of patient discomfort and decreased satisfaction. Aromatherapy has been identified as a complementary modality for the prevention and management of PONV. The purpose of this study was to assess the effect of aromatherapy on the severity of postoperative nausea (PON) in women undergoing surgical procedures in the postanesthesia care unit. Women complaining of PON received traditional antiemetics, inhalation of peppermint oil, or saline vapor. A visual analog scale was used to rate nausea at the first complaint; at 5 minutes after intervention; and, if nausea persisted, at 10 minutes after intervention. At both 5 and 10 minutes, statistical analysis showed no significant differences between intervention and nausea rating. Obtaining eligible subjects was challenging. Although many women consented, most received intraoperative antiemetics and did not report nausea postoperatively. Copyright © 2012 American Society of PeriAnesthesia Nurses. Published by Elsevier Inc. All rights reserved.

  14. Micro-invasive glaucoma surgery (MIGS: a review of surgical procedures using stents

    Directory of Open Access Journals (Sweden)

    Pillunat LE

    2017-08-01

    Full Text Available Lutz E Pillunat,1 Carl Erb,2 Anselm GM Jünemann,3 Friedemann Kimmich4 1Department of Ophthalmology, University Hospital Carl Gustav Carus, Dresden, 2Augenklinik am Wittenbergplatz, Berlin, Germany; 3Department of Ophthalmology University of Rostock, Rostock, Germany; 4eyecons, Karlsruhe, Germany Abstract: Over the last decade several novel surgical treatment options and devices for glaucoma have been developed. All these developments aim to cause as little trauma as possible to the eye, to safely, effectively, and sustainably reduce intraocular pressure (IOP, to produce reproducible results, and to be easy to adopt. The term “micro-invasive glaucoma surgery (MIGS” was used for summarizing all these procedures. Currently MIGS is gaining more and more interest and popularity. The possible reduction of the number of glaucoma medications, the ab interno approach without damaging the conjunctival tissue, and the probably safer procedures compared to incisional surgical methods may explain the increased interest in MIGS. The use of glaucoma drainage implants for lowering IOP in difficult-to-treat patients has been established for a long time, however, a variety of new glaucoma micro-stents are being manufactured by using various materials and are available to increase aqueous outflow via different pathways. This review summarizes published results of randomized clinical studies and extensive case report series on these devices, including Schlemm’s canal stents (iStent®, iStent® inject, Hydrus, suprachoroidal stents (CyPass®, iStent® Supra, and subconjunctival stents (XEN. The article summarizes the findings of published material on efficacy and safety for each of these approaches. Keywords: glaucoma, micro-invasive glaucoma surgery, MIGS, iStent, iStent inject, CyPass, Hydrus, XEN

  15. The Effect of an Orthopaedic Surgical Procedure in the National Basketball Association.

    Science.gov (United States)

    Minhas, Shobhit V; Kester, Benjamin S; Larkin, Kevin E; Hsu, Wellington K

    2016-04-01

    Professional basketball players have a high incidence of injuries requiring surgical intervention. However, no studies in the current literature have compared postoperative performance outcomes among common injuries to determine high- and low-risk procedures to these athletes' careers. To compare return-to-play (RTP) rates and performance-based outcomes after different orthopaedic procedures in National Basketball Association (NBA) players and to determine which surgeries are associated with the worst postoperative change in performance. Cohort study; Level of evidence, 3. Athletes in the NBA undergoing anterior cruciate ligament reconstruction, Achilles tendon repair, lumbar discectomy, microfracture, meniscus surgery, hand/wrist or foot fracture fixation, and shoulder stabilization were identified through team injury reports and archives on public record. The RTP rate, games played per season, and player efficiency rating (PER) were determined before and after surgery. Statistical analysis was used to compare the change between pre- and postsurgical performance among the different injuries. A total of 348 players were included. The RTP rates were highest in patients with hand/wrist fractures (98.1%; mean age, 27.0 years) and lowest for those with Achilles tears (70.8%; mean age, 28.4 years) (P = .005). Age ≥30 years (odds ratio [OR], 3.85; 95% CI, 1.24-11.91) and body mass index ≥27 kg/m(2) (OR, 3.46; 95% CI, 1.05-11.40) were predictors of not returning to play. Players undergoing Achilles tendon repair and arthroscopic knee surgery had a significantly greater decline in postoperative performance outcomes at the 1- and 3-year time points and had shorter career lengths compared with the other procedures. NBA players undergoing Achilles tendon rupture repair or arthroscopic knee surgery had significantly worse performance postoperatively compared with other orthopaedic procedures. © 2016 The Author(s).

  16. Design Transformations for Rule-based Procedural Modeling

    KAUST Repository

    Lienhard, Stefan; Lau, Cheryl; Mü ller, Pascal; Wonka, Peter; Pauly, Mark

    2017-01-01

    We introduce design transformations for rule-based procedural models, e.g., for buildings and plants. Given two or more procedural designs, each specified by a grammar, a design transformation combines elements of the existing designs to generate new designs. We introduce two technical components to enable design transformations. First, we extend the concept of discrete rule switching to rule merging, leading to a very large shape space for combining procedural models. Second, we propose an algorithm to jointly derive two or more grammars, called grammar co-derivation. We demonstrate two applications of our work: we show that our framework leads to a larger variety of models than previous work, and we show fine-grained transformation sequences between two procedural models.

  17. Design Transformations for Rule-based Procedural Modeling

    KAUST Repository

    Lienhard, Stefan

    2017-05-24

    We introduce design transformations for rule-based procedural models, e.g., for buildings and plants. Given two or more procedural designs, each specified by a grammar, a design transformation combines elements of the existing designs to generate new designs. We introduce two technical components to enable design transformations. First, we extend the concept of discrete rule switching to rule merging, leading to a very large shape space for combining procedural models. Second, we propose an algorithm to jointly derive two or more grammars, called grammar co-derivation. We demonstrate two applications of our work: we show that our framework leads to a larger variety of models than previous work, and we show fine-grained transformation sequences between two procedural models.

  18. Creation of an emergency surgery service concentrates resident training in general surgical procedures.

    Science.gov (United States)

    Ahmed, Hesham M; Gale, Stephen C; Tinti, Meredith S; Shiroff, Adam M; Macias, Aitor C; Rhodes, Stancie C; Defreese, Marissa A; Gracias, Vicente H

    2012-09-01

    Emergency general surgery (EGS) is increasingly being provided by academic trauma surgeons in an acute care surgery model. Our tertiary care hospital recently changed from a model where all staff surgeons (private, subspecialty academic, and trauma academic) were assigned EGS call to one in which an emergency surgery service (ESS), staffed by academic trauma faculty, cares for all EGS patients. In the previous model, many surgeries were "not covered" by residents because of work-hour restrictions, conflicting needs, or private surgeon preference. The ESS was separate from the trauma service. We hypothesize that by creating a separate ESS, residents can accumulate needed and concentrated operative experience in a well-supervised academic environment. A prospectively accrued EGS database was retrospectively queried for the 18-month period: July 2010 to June 2011. The Accreditation Council for Graduate Medical Education (ACGME) databases were queried for operative numbers for our residency program and for national resident data for 2 years before and after creating the ESS. The ACGME operative requirements were tabulated from online sources. ACGME requirements were compared with surgical cases performed. During the 18-month period, 816 ESS operations were performed. Of these, 307 (38%) were laparoscopy. Laparoscopic cholecystectomy and appendectomy were most common (138 and 145, respectively) plus 24 additional laparoscopic surgeries. Each resident performed, on average, 34 basic laparoscopic cases during their 2-month rotation, which is 56% of their ACGME basic laparoscopic requirement. A diverse mixture of 70 other general surgical operations was recorded for the remaining 509 surgical cases, including reoperative surgery, complex laparoscopy, multispecialty procedures, and seldom-performed operations such as surgery for perforated ulcer disease. Before the ESS, the classes of 2008 and 2009 reported that only 48% and 50% of cases were performed at the main academic

  19. General surgery residents' perception of robot-assisted procedures during surgical training.

    Science.gov (United States)

    Farivar, Behzad S; Flannagan, Molly; Leitman, I Michael

    2015-01-01

    With the continued expansion of robotically assisted procedures, general surgery residents continue to receive more exposure to this new technology as part of their training. There are currently no guidelines or standardized training requirements for robot-assisted procedures during general surgical residency. The aim of this study was to assess the effect of this new technology on general surgery training from the residents' perspective. An anonymous, national, web-based survey was conducted on residents enrolled in general surgery training in 2013. The survey was sent to 240 Accreditation Council for Graduate Medical Education-approved general surgery training programs. Overall, 64% of the responding residents were men and had an average age of 29 years. Half of the responses were from postgraduate year 1 (PGY1) and PGY2 residents, and the remainder was from the PGY3 level and above. Overall, 50% of the responses were from university training programs, 32% from university-affiliated programs, and 18% from community-based programs. More than 96% of residents noted the availability of the surgical robot system at their training institution. Overall, 63% of residents indicated that they had participated in robotic surgical cases. Most responded that they had assisted in 10 or fewer robotic cases with the most frequent activities being assisting with robotic trocar placement and docking and undocking the robot. Only 18% reported experience with operating the robotic console. More senior residents (PGY3 and above) were involved in robotic cases compared with junior residents (78% vs 48%, p robotic case. Approximately 64% of residents reported that formal training in robotic surgery was important in residency training and 46% of residents indicated that robotic-assisted cases interfered with resident learning. Only 11% felt that robotic-assisted cases would replace conventional laparoscopic surgery in the future. This study illustrates that although the most residents

  20. Autologous fibrin sealant (Vivostat®) in the neurosurgical practice: Part I: Intracranial surgical procedure

    Science.gov (United States)

    Graziano, Francesca; Certo, Francesco; Basile, Luigi; Maugeri, Rosario; Grasso, Giovanni; Meccio, Flavia; Ganau, Mario; Iacopino, Domenico G.

    2015-01-01

    Background: Hemorrhages, cerebrospinal fluid (CSF) fistula and infections are the most challenging postoperative complications in Neurosurgery. In this study, we report our preliminary results using a fully autologous fibrin sealant agent, the Vivostat® system, in achieving hemostasis and CSF leakage repair during cranio-cerebral procedures. Methods: From January 2012 to March 2014, 77 patients were studied prospectively and data were collected and analyzed. Autologous fibrin sealant, taken from patient's blood, was prepared with the Vivostat® system and applied on the resection bed or above the dura mater to achieve hemostasis and dural sealing. The surgical technique, time to bleeding control and associated complications were recorded. Results: A total of 79 neurosurgical procedures have been performed on 77 patients. In the majority of cases (98%) the same autologous fibrin glue provided rapid hemostasis and dural sealing. No patient developed allergic reactions or systemic complications in association with its application. There were no cases of cerebral hematoma, swelling, infection, or epileptic seizures after surgery whether in the immediate or in late period follow-up. Conclusions: In this preliminary study, the easy and direct application of autologous fibrin sealant agent helped in controlling cerebral bleeding and in providing prompt and efficient dural sealing with resolution of CSF leaks. Although the use of autologous fibrin glue seems to be safe, easy, and effective, further investigations are strongly recommended to quantify real advantages and potential limitations. PMID:25984391

  1. [Implementation of a post-discharge surgical site infection system in herniorrhaphy and mastectomy procedures].

    Science.gov (United States)

    San Juan Sanz, Isabel; Díaz-Agero-Pérez, Cristina; Robustillo-Rodela, Ana; Pita López, María José; Oliva Iñiguez, Lourdes; Monge-Jodrá, Vicente

    2014-10-01

    Monitoring surgical site infection (SSI) performed during hospitalization can underestimate its rates due to the shortening in hospital stay. The aim of this study was to determine the actual rates of SSI using a post-discharge monitoring system. All patients who underwent herniorraphy or mastectomy in the Hospital Universitario Ramón y Cajal from 1 January 2011 to 31 December 2011 were included. SSI data were collected prospectively according to the continuous quality improvement indicators (Indicadores Clinicos de Mejora Continua de la Calidad [INCLIMECC]) monitoring system. Post-discharge follow-up was conducted by telephone survey. A total of 409patients were included in the study, of whom 299 underwent a herniorraphy procedure, and 110 underwent a mastectomy procedure. For herniorrhaphy, the SSI rate increased from 6.02% to 7.6% (the post-discharge survey detected 21.7% of SSI). For mastectomy, the SSI rate increased from 1.8% to 3.6% (the post-discharge survey detected 50% of SSI). Post-discharge monitoring showed an increased detection of SSI incidence. Post-discharge monitoring is useful to analyze the real trend of SSI, and evaluate improvement actions. Post-discharge follow-up methods need to standardised. Copyright © 2013 Elsevier España, S.L.U. y Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.

  2. There is no benefit to universal carotid artery duplex screening before a major cardiac surgical procedure.

    Science.gov (United States)

    Adams, Brian C; Clark, Ross M; Paap, Christina; Goff, James M

    2014-01-01

    Perioperative stroke is a devastating complication after cardiac surgery. In an attempt to minimize this complication, many cardiac surgeons routinely preoperatively order carotid artery duplex scans to assess for significant carotid stenosis. We hypothesize that the routine screening of preoperative cardiac surgery patients with carotid artery duplex scans detects few patients who would benefit from carotid intervention or that a significant carotid stenosis reliably predicts stroke risk after cardiac surgery. A retrospective review identified 1,499 patients who underwent cardiac surgical procedures between July 1999 and September 2010. Data collected included patient demographics, comorbidities, history of previous stroke, preoperative carotid artery duplex scan results, location of postoperative stroke, and details of carotid endarterectomy (CEA) procedures before, in conjunction with, or after cardiac surgery. Statistical methods included univariate analysis and Fisher's exact test. Twenty-six perioperative strokes were identified (1.7%). In the 21 postoperative stroke patients for whom there is complete carotid artery duplex scan data, 3 patients had a hemodynamically significant lesion (>70%) and 1 patient underwent unilateral carotid CEA for bilateral disease. Postoperative strokes occurred in the anterior cerebral circulation (69.2%), posterior cerebral circulation (15.4%), or both (15.4%). Patient comorbidities, preoperative carotid artery duplex scan screening velocities, or types of cardiac surgical procedure were not predictive for stroke. Thirteen patients (0.86%) underwent CEA before, in conjunction with, or after cardiac surgery. Two of these patients had symptomatic disease, 1 of whom underwent CEA before and the other after his cardiac surgery. Of the 11 asymptomatic patients, 2 underwent CEA before, 3 concurrently, and 6 after cardiac surgery. Left main disease (≥50% stenosis), previous stroke, and peripheral vascular disease were found to be

  3. Minimally invasive surgical procedures for the treatment of lumbar disc herniation

    Directory of Open Access Journals (Sweden)

    Raspe, Heiner

    2005-11-01

    as an intermediate therapeutical option between conservative and operative management of small lumbar disc herniations or protrusions causing sciatica. Two RCT comparing transforaminal endoscopic procedures with microdiscectomy in patients with sciatica and small non-sequestered disc herniations show comparable short and medium term overall success rates. Concerning speed of recovery and return to work a trend towards more favourable results for the endoscopic procedures is noted. It is doubtful though, whether these results from the eleven and five years old studies are still valid for the more advanced procedures used today. The only RCT comparing the results of automated percutaneous lumbar discectomy to those of microdiscectomy showed clearly superior results of microdiscectomy. Furthermore, success rates of automated percutaneous lumbar discectomy reported in the RCT (29% differ extremely from success rates reported in case series (between 56% and 92%. The literature search retrieves no controlled trials to assess efficacy and/or effectiveness of laser-discectomy, percutaneous manual discectomy or endoscopic procedures using a posterior approach in comparison to the standard procedures. Results from recent case series permit no assessment of efficacy, especially not in comparison to standard procedures. Due to highly selected patients, modi-fications of operative procedures, highly specialised surgical units and poorly standardised outcome assessment results of case series are highly variable, their generalisability is low. The results of the five economical analyses are, due to conceptual and methodological problems, of no value for decision-making in the context of the German health care system. Discussion: Aside from low methodological study quality three conceptual problems complicate the interpretation of results. 1. Continuous further development of technologies leads to a diversity of procedures in use which prohibits generalisation of study results

  4. Increased pediatric sub-specialization is associated with decreased surgical complication rates for inpatient pediatric urology procedures

    Science.gov (United States)

    Tejwani, R.; Wang, H-H. S.; Young, B. J.; Greene, N. H.; Wolf, S.; Wiener, J. S.; Routh, J. C.

    2016-01-01

    Summary Introduction Increased case volumes and training are associated with better surgical outcomes. However, the impact of pediatric urology sub-specialization on perioperative complication rates is unknown. Objectives To determine the presence and magnitude of difference in rates of common postoperative complications for elective pediatric urology procedures between specialization levels of urologic surgeons. The Nationwide Inpatient Sample (NIS), a nationally representative administrative database, was used. Study Design The NIS (1998–2009) was retrospectively reviewed for pediatric (≤18 years) admissions, using ICD-9-CM codes to identify urologic surgeries and National Surgical Quality Improvement Program (NSQIP) inpatient postoperative complications. Degree of pediatric sub-specialization was calculated using a Pediatric Proportion Index (PPI), defined as the ratio of children to total patients operated on by each provider. The providers were grouped into PPI quartiles: Q1, 0–25% specialization; Q2, 25–50%; Q3, 50–75%; Q4, 75–100%. Weighted multivariate analysis was performed to test for associations between PPI and surgical complications. Results A total of 71,479 weighted inpatient admissions were identified. Patient age decreased with increasing specialization: Q1, 7.9 vs Q2, 4.8 vs Q3, 4.8 vs Q4, 4.6 years, PSpecialization was not associated with race (P>0.20), gender (P>0.50), or comorbidity scores (P=0.10). Mortality (1.5% vs 0.2% vs 0.3% vs 0.4%, Pspecialization. Patients treated by more highly specialized surgeons incurred slightly higher costs (Q2, +4%; Q3, +1%; Q4 + 2%) but experienced shorter length of hospital stay (Q2, –5%; Q3, –10%; Q4, –3%) compared with the least specialized providers. A greater proportion of patients treated by Q1 and Q3 specialized urologists had CCS ≥2 than those seen by Q2 or Q4 urologists (12.5% and 12.2%, respectively vs 8.4% and 10.9%, respectively, P=0.04). Adjusting for confounding effects

  5. A pilot study to determine medical laser generated air contaminant emission rates for a simulated surgical procedure.

    Science.gov (United States)

    Lippert, Julia F; Lacey, Steven E; Lopez, Ramon; Franke, John; Conroy, Lorraine; Breskey, John; Esmen, Nurtan; Liu, Li

    2014-01-01

    The U.S. Occupational Safety and Health Administration (OSHA) estimates that half a million health-care workers are exposed to laser surgical smoke each year. The purpose of this study was to establish a methodology to (1) estimate emission rates of laser-generated air contaminants (LGACs) using an emission chamber, and to (2) perform a screening study to differentiate the effects of three laser operational parameters. An emission chamber was designed, fabricated, and assessed for performance to estimate the emission rates of gases and particles associated with LGACs during a simulated surgical procedure. Two medical lasers (Holmium Yttrium Aluminum Garnet [Ho:YAG] and carbon dioxide [CO2]) were set to a range of plausible medical laser operational parameters in a simulated surgery to pyrolyze porcine skin generating plume in the emission chamber. Power, pulse repetition frequency (PRF), and beam diameter were evaluated to determine the effect of each operational parameter on emission rate using a fractional factorial design. The plume was sampled for particulate matter and seven gas phase combustion byproduct contaminants (benzene, ethylbenzene, toluene, formaldehyde, hydrogen cyanide, carbon dioxide, and carbon monoxide): the gas phase emission results are presented here. Most of the measured concentrations of gas phase contaminants were below their limit of detection (LOD), but detectable measurements enabled us to determine laser operation parameter influence on CO2 emissions. Confined to the experimental conditions of this screening study, results indicated that beam diameter was statistically significantly influential and power was marginally statistically significant to emission rates of CO2 when using the Ho:YAG laser but not with the carbon dioxide laser; PRF was not influential vis-a-vis emission rates of these gas phase contaminants.

  6. Factors affecting the design of instrument flight procedures

    Directory of Open Access Journals (Sweden)

    Ivan FERENCZ

    2008-01-01

    Full Text Available The article highlights factors, which might affect the design of instrument flight procedures. Ishikawa diagram is used to distribute individual factors into classes, as are People, Methods, Regulations, Tools, Data and Environment.

  7. Development of an Overlay Design Procedure for Composite Pavements

    Science.gov (United States)

    2017-09-01

    The composite overlay design procedure currently used by ODOT sometimes produces very large overlay thicknesses that are deemed structurally unnecessary, especially for composite pavements already with thick asphalt overlays. This study was initiated...

  8. 78 FR 11207 - Clinical Study Designs for Surgical Ablation Devices for Treatment of Atrial Fibrillation...

    Science.gov (United States)

    2013-02-15

    ...] Clinical Study Designs for Surgical Ablation Devices for Treatment of Atrial Fibrillation; Guidance for... devices intended for the treatment of atrial fibrillation. DATES: Submit either electronic or written... Study Designs for Surgical Ablation Devices for Treatment of Atrial Fibrillation'' to the Division of...

  9. Chronic subdural hematoma: a systematic review and meta-analysis of surgical procedures.

    Science.gov (United States)

    Liu, Weiming; Bakker, Nicolaas A; Groen, Rob J M

    2014-09-01

    In this paper the authors systematically evaluate the results of different surgical procedures for chronic subdural hematoma (CSDH). The MEDLINE, Embase, Cochrane Central Register of Controlled Trials, and other databases were scrutinized according to the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analysis) statement, after which only randomized controlled trials (RCTs) and quasi-RCTs were included. At least 2 different neurosurgical procedures in the management of chronic subdural hematoma (CSDH) had to be evaluated. Included studies were assessed for the risk of bias. Recurrence rates, complications, and outcome including mortality were taken as outcome measures. Statistical heterogeneity in each meta-analysis was assessed using the T(2) (tau-squared), I(2), and chi-square tests. The DerSimonian-Laird method was used to calculate the summary estimates using the fixed-effect model in meta-analysis. Of the 297 studies identified, 19 RCTs were included. Of them, 7 studies evaluated the use of postoperative drainage, of which the meta-analysis showed a pooled OR of 0.36 (95% CI 0.21-0.60; p < 0.001) in favor of drainage. Four studies compared twist drill and bur hole procedures. No significant differences between the 2 methods were present, but heterogeneity was considered to be significant. Three studies directly compared the use of irrigation before drainage. A fixed-effects meta-analysis showed a pooled OR of 0.49 (95% CI 0.21-1.14; p = 0.10) in favor of irrigation. Two studies evaluated postoperative posture. The available data did not reveal a significant advantage in favor of the postoperative supine posture. Regarding positioning of the catheter used for drainage, it was shown that a frontal catheter led to a better outcome. One study compared duration of drainage, showing that 48 hours of drainage was as effective as 96 hours of drainage. Postoperative drainage has the advantage of reducing recurrence without increasing complications

  10. Design-Based Comparison of Spine Surgery Simulators: Optimizing Educational Features of Surgical Simulators.

    Science.gov (United States)

    Ryu, Won Hyung A; Mostafa, Ahmed E; Dharampal, Navjit; Sharlin, Ehud; Kopp, Gail; Jacobs, W Bradley; Hurlbert, R John; Chan, Sonny; Sutherland, Garnette R

    2017-10-01

    Simulation-based education has made its entry into surgical residency training, particularly as an adjunct to hands-on clinical experience. However, one of the ongoing challenges to wide adoption is the capacity of simulators to incorporate educational features required for effective learning. The aim of this study was to identify strengths and limitations of spine simulators to characterize design elements that are essential in enhancing resident education. We performed a mixed qualitative and quantitative cohort study with a focused survey and interviews of stakeholders in spine surgery pertaining to their experiences on 3 spine simulators. Ten participants were recruited spanning all levels of training and expertise until qualitative analysis reached saturation of themes. Participants were asked to perform lumbar pedicle screw insertion on 3 simulators. Afterward, a 10-item survey was administrated and a focused interview was conducted to explore topics pertaining to the design features of the simulators. Overall impressions of the simulators were positive with regards to their educational benefit, but our qualitative analysis revealed differing strengths and limitations. Main design strengths of the computer-based simulators were incorporation of procedural guidance and provision of performance feedback. The synthetic model excelled in achieving more realistic haptic feedback and incorporating use of actual surgical tools. Stakeholders from trainees to experts acknowledge the growing role of simulation-based education in spine surgery. However, different simulation modalities have varying design elements that augment learning in distinct ways. Characterization of these design characteristics will allow for standardization of simulation curricula in spinal surgery, optimizing educational benefit. Copyright © 2017 Elsevier Inc. All rights reserved.

  11. Readmissions to Different Hospitals After Common Surgical Procedures and Consequences for Implementation of Perioperative Surgical Home Programs.

    Science.gov (United States)

    Dexter, Franklin; Epstein, Richard H; Sun, Eric C; Lubarsky, David A; Dexter, Elisabeth U

    2017-09-01

    We consider whether there should be greater priority of information sharing about postacute surgical resources used: (1) at skilled nursing facilities or inpatient rehabilitation hospitals to which patients are transferred upon discharge (when applicable) versus (2) at different hospitals where readmissions occur. Obtaining and storing data electronically from these 2 sources for Perioperative Surgical Home initiatives are dissimilar; both can be challenging depending on the country and health system. Using the 2013 US Nationwide Readmissions Database, we studied discharges of surgical diagnosis-related group (DRG) with US national median length of stay (LOS) ≥ 3 days and ≥ 10 hospitals each with ≥ 100 discharges for the Medicare Severity DRG. Nationwide, 16.15% (95% confidence interval [CI], 15.14%-17.22%) of discharges were with a disposition of "not to home" (ie, transfer to a skilled nursing facility or an inpatient rehabilitation hospital). Within 30 days, 0.88% of discharges (0.82%-0.95%) were followed by readmission and to a different hospital than the original hospital where the surgery was performed. Among all discharges, disposition "not to home" versus "to home" was associated with greater odds that the patient would have readmission within 30 days and to a different hospital than where the surgery was performed (2.11, 95% CI, 1.96-2.27; P < .0001). In part, this was because disposition "not to home" was associated with greater odds of readmission to any hospital (1.90, 95% CI, 1.82-1.98; P < .0001). In addition, among the subset of discharges with readmission within 30 days, disposition "not to home" versus "to home" was associated with greater odds that the readmission was to a different hospital than where the surgery was performed (1.20, 95% CI, 1.11-1.31; P < .0001). There was no association between the hospitals' median LOS for the DRG and the odds that readmission was to a different hospital (P = .82). The odds ratio per each 1 day decrease

  12. Automatic control design procedures for restructurable aircraft control

    Science.gov (United States)

    Looze, D. P.; Krolewski, S.; Weiss, J.; Barrett, N.; Eterno, J.

    1985-01-01

    A simple, reliable automatic redesign procedure for restructurable control is discussed. This procedure is based on Linear Quadratic (LQ) design methodologies. It employs a robust control system design for the unfailed aircraft to minimize the effects of failed surfaces and to extend the time available for restructuring the Flight Control System. The procedure uses the LQ design parameters for the unfailed system as a basis for choosing the design parameters of the failed system. This philosophy alloys the engineering trade-offs that were present in the nominal design to the inherited by the restructurable design. In particular, it alloys bandwidth limitations and performance trade-offs to be incorporated in the redesigned system. The procedure also has several other desirable features. It effectively redistributes authority among the available control effectors to maximize the system performance subject to actuator limitations and constraints. It provides a graceful performance degradation as the amount of control authority lessens. When given the parameters of the unfailed aircraft, the automatic redesign procedure reproduces the nominal control system design.

  13. Expressive Design Tools: Procedural Content Generation for Game Designers

    OpenAIRE

    Smith, Gillian Margaret

    2012-01-01

    Games are shaped by the tools we use to make them and our ability to model the concepts they address. Vast improvements in computer graphics technology, processing power, storage capacity, and physics simulations have driven game design for the past forty years, leading to beautiful, spacious, detailed, and highly immersive worlds supporting games that are, for the most part, fundamentally about movement, collision, and other physics-based concepts. Designers use increasingly complex tools th...

  14. Influence of usage history, instrument complexity, and different cleaning procedures on the cleanliness of blood-contaminated dental surgical instruments

    NARCIS (Netherlands)

    Wu, G.; Yu, X.F.

    2009-01-01

    Our study assessed the factors that influence the resistance of blood residues on dental surgical instruments to washer‐disinfector-based cleaning procedures in a clinical setting. The use of 2 additional cleaning methods—presoaking and scrubbing by hand—and the use of newer and/or less structurally

  15. Vaginal vault suspension during hysterectomy for benign indications: a prospective register study of agreement on terminology and surgical procedure.

    Science.gov (United States)

    Bonde, Lisbeth; Noer, Mette Calundann; Møller, Lars Alling; Ottesen, Bent; Gimbel, Helga

    2017-07-01

    Several suspension methods are used to try to prevent pelvic organ prolapse (POP) after hysterectomy. We aimed to evaluate agreement on terminology and surgical procedure of these methods. We randomly chose 532 medical records of women with a history of hysterectomy from the Danish Hysterectomy and Hysteroscopy Database (DHHD). Additionally, we video-recorded 36 randomly chosen hysterectomies. The hysterectomies were registered in the DHHD. The material was categorized according to predefined suspension methods. Agreement compared suspension codes in DHHD (gynecologists' registrations) with medical records (gynecologists' descriptions) and with videos (reviewers' categorizations) respectively. Whether the vaginal vault was suspended (pooled suspension) or not (no suspension method + not described) was analyzed, in addition to each suspension method. Regarding medical records, agreement on terminology was good among patients undergoing pooled suspension in cases of hysterectomy via the abdominal and vaginal route (agreement 78.7, 92.3%). Regarding videos, agreement on surgical procedure was good among pooled suspension patients in cases of hysterectomy via the abdominal, laparoscopic, and vaginal routes (agreement 88.9, 97.8, 100%). Agreement on individual suspension methods differed regarding both medical records (agreement 0-90.1%) and videos (agreement 0-100%). Agreement on terminology and surgical procedure regarding suspension method was good in respect of pooled suspension. However, disagreement was observed when individual suspension methods and operative details were scrutinized. Better consensus of terminology and surgical procedure is warranted to enable further research aimed at preventing POP among women undergoing hysterectomy.

  16. Editor's choice--Use of disposable radiation-absorbing surgical drapes results in significant dose reduction during EVAR procedures.

    Science.gov (United States)

    Kloeze, C; Klompenhouwer, E G; Brands, P J M; van Sambeek, M R H M; Cuypers, P W M; Teijink, J A W

    2014-03-01

    Because of the increasing number of interventional endovascular procedures with fluoroscopy and the corresponding high annual dose for interventionalists, additional dose-protecting measures are desirable. The purpose of this study was to evaluate the effect of disposable radiation-absorbing surgical drapes in reducing scatter radiation exposure for interventionalists and supporting staff during an endovascular aneurysm repair (EVAR) procedure. This was a randomized control trial in which 36 EVAR procedures were randomized between execution with and without disposable radiation-absorbing surgical drapes (Radpad: Worldwide Innovations & Technologies, Inc., Kansas City, US, type 5511A). Dosimetric measurements were performed on the interventionalist (hand and chest) and theatre nurse (chest) with and without the use of the drapes to obtain the dose reduction and effect on the annual dose caused by the drapes. Use of disposable radiation-absorbing surgical drapes resulted in dose reductions of 49%, 55%, and 48%, respectively, measured on the hand and chest of the interventionalist and the chest of the theatre nurse. The use of disposable radiation-absorbing surgical drapes significantly reduces scatter radiation exposure for both the interventionalist and the supporting staff during EVAR procedures. Copyright © 2013 European Society for Vascular Surgery. Published by Elsevier Ltd. All rights reserved.

  17. Two Cases of Type Va Extrahepatic Bile Duct Duplication With Distal Klatskin Tumor Surgically Treated with Whipple Procedure and Hepaticojejunostomy.

    Science.gov (United States)

    Hammad, Tariq A; Alastal, Yaseen; Khan, Muhammad Ali; Hammad, Mohammad; Alaradi, Osama; Nigam, Ankesh; Sodeman, Thomas C; Nawras, Ali

    2015-10-01

    We describe the diagnostic and therapeutic challenges of a type Va extrahepatic bile duct duplication coexistent with distally located hilar cholangiocarcinoma (Klatskin tumor). We present 2 cases that were diagnosed preoperatively and treated with a modified surgical technique of a combined pylorus-preserving Whipple procedure and hepaticojejunostomy.

  18. Surgical Procedures of the Elbow: A Nationwide Cross-Sectional Observational Study in the United States

    Directory of Open Access Journals (Sweden)

    Ahmet Kinaci

    2015-01-01

    Full Text Available Background:  Elbow surgery is shared by several subspecialties. We were curious about the most common elbow surgeries and their corresponding diagnoses in the United States.   Methods:  We used the National Hospital Discharge Survey (NHDS and the National Survey of Ambulatory Surgery (NSAS data gathered in 2006-databases that together provide an estimate of all inpatient and ambulatory surgical care in the US.  Results:  An estimated 150,000 elbow surgeries were performed in the US in 2006, 75% in an outpatient setting. The most frequent diagnosis treated operative was enthesopathy (e.g. lateral epicondylitis and it was treated with several different procedures. More than three quarters of all elbow surgeries treated enthesopathy, cubital tunnel syndrome, or fracture (radial head in particular. Arthroscopy and arthroplasty accounted for less than 10% of all elbow surgeries.  Conclusions:  Elbow surgery in the United States primarily addresses enthesopathies such as tennis elbow, cubital tunnel syndrome, and trauma. It is notable that some of the most common elbow surgeries (those that address enthesopathy and radial head fracture are some of the most variably utilized and debated.

  19. Accuracy of a Wrist-Worn Heart Rate Sensing Device during Elective Pediatric Surgical Procedures

    Directory of Open Access Journals (Sweden)

    Gloria Pelizzo

    2018-03-01

    Full Text Available The reliability of wearable photoplethysmography (PPG sensors to measure heart rate (HR in hospitalized patients has only been demonstrated in adults. We evaluated the accuracy of HR monitoring with a personal fitness tracker (PFT in children undergoing surgery. HR monitoring was performed using a wrist-worn PFT (Fitbit Charge HR in 30 children (8.21 ± 3.09 years undergoing laparoscopy (n = 8 or open surgery (n = 22. HR values were analyzed preoperatively and during surgery. The accuracy of HR recordings was compared with measurements recorded during continuous electrocardiographic (cECG monitoring; HRs derived from continuous monitoring with pulse oximetry (SpO2R were used as a positive control. PFT-derived HR values were in agreement with those recorded during cECG (r = 0.99 and SpO2R (r = 0.99 monitoring. PFT performance remained high in children < 8 years (r = 0.99, with a weight < 30 kg (r = 0.99 and when the HR was < 70 beats per minute (bpm (r = 0.91 or > 140 bpm (r = 0.99. PFT accuracy was similar during laparoscopy and open surgery, as well as preoperatively and during the intervention (r > 0.9. PFT–derived HR showed excellent accuracy compared with HRs measured by cECG and SpO2R during pediatric surgical procedures. Further clinical evaluation is needed to define whether PFTs can be used in different health care settings.

  20. Robotic assisted surgery in pediatric gynecology: promising innovation in mini invasive surgical procedures.

    Science.gov (United States)

    Nakib, Ghassan; Calcaterra, Valeria; Scorletti, Federico; Romano, Piero; Goruppi, Ilaria; Mencherini, Simonetta; Avolio, Luigi; Pelizzo, Gloria

    2013-02-01

    Robotic assisted surgery is not yet widely applied in the pediatric field. We report our initial experience regarding the feasibility, safety, benefits, and limitations of robot-assisted surgery in pediatric gynecological patients. Descriptive, retrospective report of experience with pediatric gynecological patients over a period of 12 months. Department of Pediatric Surgery, IRCCS Policlinico San Matteo Foundation. Children and adolescents, with a surgical diagnosis of ovarian and/or tubal lesions. Robot assembly time and operative time, days of hospitalization, time to cessation of pain medication, complication rate, conversion rate to laparoscopic procedure and trocar insertion strategy. Six children and adolescents (2.4-15 yrs), weighing 12-55 kg, underwent robotic assisted surgery for adnexal pathologies: 2 for ovarian cystectomy, 2 for oophorectomy, 1 for right oophorectomy and left salpingo-oophorectomy for gonadal disgenesis, 1 for exploration for suspected pelvic malformation. Mean operative time was 117.5 ± 34.9 minutes. Conversion to laparatomy was not necessary in any of the cases. No intra- or postoperative complications occurred. Initial results indicate that robotic assisted surgery is safely applicable in the pediatric gynecological population, although it is still premature to conclude that it provides better clinical outcomes than traditional laparoscopic surgery. Randomized, prospective, comparative studies will help characterize the advantages and disadvantages of this new technology in pediatric patients. Copyright © 2013 North American Society for Pediatric and Adolescent Gynecology. Published by Elsevier Inc. All rights reserved.

  1. Duodenum preserving pancreatectomy in chronic pancreatitis: Design of a randomized controlled trial comparing two surgical techniques [ISRCTN50638764

    Directory of Open Access Journals (Sweden)

    Reidel Margot A

    2006-05-01

    Full Text Available Abstract Background Chronic pancreatitis is an inflammatory disease which is characterized by an irreversible conversion of pancreatic parenchyma to fibrous tissue. Beside obstructive jaundice and pseudocyst formation, about half of the patients need surgical intervention due to untreatable chronic pain during the course of the disease. In most of the patients with chronic pancreatitis, the head of the pancreas is the trigger of the chronic inflammatory process. Therefore, resection of pancreatic head tissue must be the central part of any surgical intervention. However, it is unclear to which extent the surgical procedure must be radical in order to obtain a favourable outcome for the patients. Design A single centre randomized controlled, superiority trial to compare two techniques of duodenum preserving pancreatic head resection. Sample size: 65 patients will be included and randomized intraoperatively. Eligibility criteria: All patients with chronic pancreatitis and indication for surgical resection and signed informed consent. Cumulative primary endpoint (hierarchical model: duration of surgical procedure, quality of life after one year, duration of intensive care unit stay, duration of hospital stay. Reference treatment: Resection of the pancreatic head with dissection of the pancreas from the portal vein and transsection of the gland (Beger procedure. Intervention: Partial Resection of the pancreatic head without transsection of the organ and visualization of the portal vein (Berne procedure. Duration: September 2003-October 2007. Organisation/responsibility The trial is conducted in compliance with the protocol and in accordance with the moral, ethical, regulatory and scientific principles governing clinical research as set out in the Declaration of Helsinki (1989 and the Good Clinical Practice guideline (GCP. The Center for Clinical Studies of the Department of Surgery Heidelberg is responsible for planning, conducting and final

  2. Custom-Machined Miniplates and Bone-Supported Guides for Orthognathic Surgery: A New Surgical Procedure.

    Science.gov (United States)

    Brunso, Joan; Franco, Maria; Constantinescu, Thomas; Barbier, Luis; Santamaría, Joseba Andoni; Alvarez, Julio

    2016-05-01

    Several surgical strategies exist to improve accuracy in orthognathic surgery, but ideal planning and treatment have yet to be described. The purpose of this study was to present and assess the accuracy of a virtual orthognathic positioning system (OPS), based on the use of bone-supported guides for placement of custom, highly rigid, machined titanium miniplates produced using computer-aided design and computer-aided manufacturing technology. An institutional review board-approved prospective observational study was designed to evaluate our early experience with the OPS. The inclusion criteria were as follows: adult patients who were classified as skeletal Class II or III patients and as candidates for orthognathic surgery or who were candidates for maxillomandibular advancement as a treatment for obstructive sleep apnea. Reverse planning with computed tomography and modeling software was performed. Our OPS was designed to avoid the use of intermaxillary fixation and occlusal splints. The minimum follow-up period was 1 year. Six patients were enrolled in the study. The custom OPS miniplates fit perfectly with the anterior buttress of the maxilla and the mandible body surface intraoperatively. To evaluate accuracy, the postoperative 3-dimensional reconstructed computed tomography image and the presurgical plan were compared. In the maxillary fragments that underwent less than 6 mm of advancement, the OPS enabled an SD of 0.14 mm (92% within 1 mm) at the upper maxilla and 0.34 mm (86% within 1 mm) at the mandible. In the case of great advancements of more than 10 mm, the SD was 1.33 mm (66% within 1 mm) at the upper maxilla and 0.67 mm (73% within 1 mm) at the mandibular level. Our novel OPS was safe and well tolerated, providing positional control with considerable surgical accuracy. The OPS simplified surgery by being independent of support from the opposite maxilla and obviating the need for classic intermaxillary occlusal splints. Copyright © 2016

  3. Management of Extreme Ametropia after Penetrating Keratoplasty: A Series of Surgical Procedures for High Myopia and Astigmatism

    Directory of Open Access Journals (Sweden)

    Jorge E. Valdez-Garcia

    2014-08-01

    Full Text Available A series of surgical interventions - relaxing corneal incisions, intraocular lens, and intrastromal rings - were used to correct a case of extreme ametropia in a thin cornea after a penetrating keratoplasty in an 18-year-old patient who presented with a -10.25 -8.50 × 120 preoperative refraction and 20/200 best-corrected visual acuity (BCVA. After a series of surgical procedures, the patient's BCVA in his left eye improved to 20/30 with +0.50 -1.00 × 170, the slit lamp examination showed no significant findings, and the patient's visual complaints disappeared. At the 1-year follow-up, the BCVA was 20/25, without visual complaints. The process of individualizing the surgical procedure in the present case was employed in an outcome-based approach, that is, the next surgical procedure was defined after the surgery and postoperative evaluation. The patient did not present complications during the follow-up period of 2.5 years.

  4. Full Robotic Colorectal Resections for Cancer Combined With Other Major Surgical Procedures: Early Experience With the da Vinci Xi.

    Science.gov (United States)

    Morelli, Luca; Di Franco, Gregorio; Guadagni, Simone; Palmeri, Matteo; Gianardi, Desirée; Bianchini, Matteo; Moglia, Andrea; Ferrari, Vincenzo; Caprili, Giovanni; D'Isidoro, Cristiano; Melfi, Franca; Di Candio, Giulio; Mosca, Franco

    2017-08-01

    The da Vinci Xi has been developed to overcome some of the limitations of the previous platform, thereby increasing the acceptance of its use in robotic multiorgan surgery. Between January 2015 and October 2015, 10 patients with synchronous tumors of the colorectum and others abdominal organs underwent robotic combined resections with the da Vinci Xi. Trocar positions respected the Universal Port Placement Guidelines provided by Intuitive Surgical for "left lower quadrant," with trocars centered on the umbilical area, or shifted 2 to 3 cm to the right or to the left, depending on the type of combined surgical procedure. All procedures were completed with the full robotic technique. Simultaneous procedures in same quadrant or left quadrant and pelvis, or left/right and upper, were performed with a single docking/single targeting approach; in cases of left/right quadrant or right quadrant/pelvis, we performed a dual-targeting operation. No external collisions or problems related to trocar positions were noted. No patient experienced postoperative surgical complications and the mean hospital stay was 6 days. The high success rate of full robotic colorectal resection combined with other surgical interventions for synchronous tumors, suggest the efficacy of the da Vinci Xi in this setting.

  5. Supportive psychotherapy or client education alongside surgical procedures to correct complications of female genital mutilation: A systematic review.

    Science.gov (United States)

    Abayomi, Olukayode; Chibuzor, Moriam T; Okusanya, Babasola O; Esu, Ekpereonne; Odey, Edward; Meremikwu, Martin M

    2017-02-01

    Supportive psychotherapy, in individual or group settings, may help improve surgical outcomes for women and girls living with female genital mutilation (FGM). To assess whether supportive psychotherapy given alongside surgical procedures to correct complications of FGM improves clinical outcomes. We searched major databases including CENTRAL, Medline, African Index Medicus, SCOPUS, PsycINFO, and others. There were no language restrictions. We checked the reference lists of retrieved studies for additional reports of relevant studies. We included studies of girls and women living with any type of FGM who received supportive psychotherapy or client education sessions alongside any surgical procedure to correct health complications from FGM. Two team members independently screened studies for eligibility. There were no eligible studies identified. There is no direct evidence for the benefits or harms of supportive psychotherapy alongside surgical procedures for women and girls living with FGM. Research evidence is urgently needed to guide clinical practice. 42015024639. © 2017 International Federation of Gynecology and Obstetrics. The World Health Organization retains copyright and all other rights in the manuscript of this article as submitted for publication.

  6. Model checking as an aid to procedure design

    International Nuclear Information System (INIS)

    Zhang, Wenhu

    2001-01-01

    The OECD Halden Reactor Project has been actively working on computer assisted operating procedures for many years. The objective of the research has been to provide computerised assistance for procedure design, verification and validation, implementation and maintenance. For the verification purpose, the application of formal methods has been considered in several reports. The recent formal verification activity conducted at the Halden Project is based on using model checking to the verification of procedures. This report presents verification approaches based on different model checking techniques and tools for the formalization and verification of operating procedures. Possible problems and relative merits of the different approaches are discussed. A case study of one of the approaches is presented to show the practical application of formal verification. Application of formal verification in the traditional procedure design process can reduce the human resources involved in reviews and simulations, and hence reduce the cost of verification and validation. A discussion of the integration of the formal verification with the traditional procedure design process is given at the end of this report. (Author)

  7. Design of Highly Articulated Mechanism for Surgical Applications

    Science.gov (United States)

    2016-08-31

    cooperative control of an AGV and snake robot 2. Advanced our filtering estimation theory to handle highly non- linear spaces using Lie algebra tools 3... linear spaces using Lie algebra tools 3. Investigated novel means by which we can infer or sense force at the tip of the snake robot. We have since...most robots, the surgical snake robot is non- linear . We were, however, able to re-write the Kalman filter estimator in the Lie algebra of the position

  8. Bilateral symmetry in vision and influence of ocular surgical procedures on binocular vision: A topical review

    Directory of Open Access Journals (Sweden)

    Samuel Arba Mosquera

    2016-10-01

    Full Text Available We analyze the role of bilateral symmetry in enhancing binocular visual ability in human eyes, and further explore how efficiently bilateral symmetry is preserved in different ocular surgical procedures. The inclusion criterion for this review was strict relevance to the clinical questions under research. Enantiomorphism has been reported in lower order aberrations, higher order aberrations and cone directionality. When contrast differs in the two eyes, binocular acuity is better than monocular acuity of the eye that receives higher contrast. Anisometropia has an uncommon occurrence in large populations. Anisometropia seen in infancy and childhood is transitory and of little consequence for the visual acuity. Binocular summation of contrast signals declines with age, independent of inter-ocular differences. The symmetric associations between the right and left eye could be explained by the symmetry in pupil offset and visual axis which is always nasal in both eyes. Binocular summation mitigates poor visual performance under low luminance conditions and strong inter-ocular disparity detrimentally affects binocular summation. Considerable symmetry of response exists in fellow eyes of patients undergoing myopic PRK and LASIK, however the method to determine whether or not symmetry is maintained consist of comparing individual terms in a variety of ad hoc ways both before and after the refractive surgery, ignoring the fact that retinal image quality for any individual is based on the sum of all terms. The analysis of bilateral symmetry should be related to the patients’ binocular vision status. The role of aberrations in monocular and binocular vision needs further investigation.

  9. A Prospective Study of Postoperative Vomiting in Children Undergoing Different Surgical Procedures under General Anaesthesia

    Directory of Open Access Journals (Sweden)

    Jaya Choudhary

    2008-01-01

    Full Text Available To identify the risk factors associated with postoperative vomiting (POV in paediatric population undergoing common surgeries. The risk factors studied for association with POV were age> 5 years, female gender, previous history of POV/motion sickness, type of surgery and duration of anaesthesia> 45 min. A total of 100 ASA grade I and II patients of either sex aged between 2-12 years undergoing elective surgical procedures were screened for the study. All patients underwent similar anaesthe-sia protocol and received two antiemetic agents (ondansetron 0.05mg.kg-1 and dexamethasone 0.15mg.kg-1 in premedication. The patients were observed for 24 hours postoperatively for the incidence of vomiting, number of times rescue antiemetic given and any adverse reaction to antiemetic.Overall 34% patients (34/100 developed POV of which 26 had only one episode and 8 patients had 2 episodes during first 24 h. Incidence of POV was 13% (13/100 in first 4 h whereas it was 29% (29/100 in late postoperative period. In early post operative period, POV was not associated significantly with any predicted risk factors. However, age>5years, duration of anaesthesia>45 minutes and history of motion sickness/POV were significantly associated in late postoperative period(4-24h. Female gender and type of surgery were not associated with increased POV. The combination antiemetic effectively prevented POV in early postoperative period (0-4h only but not in late postoperative period(0-24h.

  10. Short Operative Duration and Surgical Site Infection Risk in Hip and Knee Arthroplasty Procedures.

    Science.gov (United States)

    Dicks, Kristen V; Baker, Arthur W; Durkin, Michael J; Anderson, Deverick J; Moehring, Rebekah W; Chen, Luke F; Sexton, Daniel J; Weber, David J; Lewis, Sarah S

    2015-12-01

    To determine the association (1) between shorter operative duration and surgical site infection (SSI) and (2) between surgeon median operative duration and SSI risk among first-time hip and knee arthroplasties. Retrospective cohort study A total of 43 community hospitals located in the southeastern United States. Adults who developed SSIs according to National Healthcare Safety Network criteria within 365 days of first-time knee or hip arthroplasties performed between January 1, 2008 and December 31, 2012. Log-binomial regression models estimated the association (1) between operative duration and SSI outcome and (2) between surgeon median operative duration and SSI outcome. Hip and knee arthroplasties were evaluated in separate models. Each model was adjusted for American Society of Anesthesiology score and patient age. A total of 25,531 hip arthroplasties and 42,187 knee arthroplasties were included in the study. The risk of SSI in knee arthroplasties with an operative duration shorter than the 25th percentile was 0.40 times the risk of SSI in knee arthroplasties with an operative duration between the 25th and 75th percentile (risk ratio [RR], 0.40; 95% confidence interval [CI], 0.38-0.56; Poperative duration did not demonstrate significant association with SSI for hip arthroplasties (RR, 1.04; 95% CI, 0.79-1.37; P=.36). Knee arthroplasty surgeons with shorter median operative durations had a lower risk of SSI than surgeons with typical median operative durations (RR, 0.52; 95% CI, 0.43-0.64; Poperative durations were not associated with a higher SSI risk for knee or hip arthroplasty procedures in our analysis.

  11. THE INFLUENCE OF THE CHOSEN SOCIO-DEMOGRAPHIC FACTORS ON THE QUALITY OF LIFE IN WOMEN AFTER GYNAECOLOGICAL SURGICAL PROCEDURES

    Directory of Open Access Journals (Sweden)

    Beata Karakiewicz

    2010-09-01

    Full Text Available Background: The aim of this study was to assess how the chosen socio-demographic factors effect the quality of life in the patients after gynaecological surgical procedures. Materials and Methods: Research was conducted in 2007 among 250 women operated in the Department of Reproduction and Gynaecology, the Pomeranian Medical University in Szczecin. In this survey-based study, we used a standardized quality of life questionnaire, the Women’s Health Questionnaire (WHQ, developed by Dr Myra Hunter at London University. Results: The most numerous patients were those with sleep disorders (38,8%, 37,6% of the surveyed complained of troublesome menstrual symptoms, 26,8% of respondents had disturbing somatic symptoms, short memory and problems with concentration. The lowest percentage of women (12,4% felt anxiety and fear associated with the past gynaecological surgical procedure. Conclusions: 1. General satisfaction and good disposition is declared by the majority of patients after gynaecological surgical procedures. 2. Age, education, having a partner, place of residence, and the number of children are the factors which have significant effect on the quality of life in women after gynaecological procedures.

  12. Pattern of surgical procedures performed in the orthopaedic units of a tertiary hospital in South West Nigeria

    Directory of Open Access Journals (Sweden)

    Thomas O Adekoya-Cole

    2016-01-01

    Full Text Available Background: Lagos University Teaching Hospital (LUTH is one of the foremost teaching institutions in Nigeria. It is a recognized training institution for residency training in Nigeria. However, a thorough evaluation of the procedures being undertaken by the orthopaedic teams in this centre and the impact on the type of training being passed on to the resident doctors in training is the focus of this paper. Objectives: To determine the pattern of procedures performed by the orthopaedic units of the Department of Surgery, LUTH with a view to import the findings in re-organizing its structure based on service requirement, manpower allocation and to make recommendation. Methods: We retrospectively reviewed data including age, sex, procedures and leading surgeons retrieved from all our operating theatres over a period from 1st January 2010 to 31st December 2011. The data retrieved was analyzed. Results: A total 741 procedures were performed over the 2 year period. More male patients (58.5% had procedures performed on them than the female patients. The mean age of patients treated was 37.2±15.5 years. Trauma related procedures accounted for 68.8% of the total procedures. Open reduction and internal fixation surgical operations were the most common trauma related procedure while ablative surgical operations following Diabetic Mellitus foot syndrome were the most common non-trauma related procedure performed. Conclusion: Trauma related surgery remains the most common procedures in our teaching hospital. Efforts should be made to increase the number of elective operations like Arthroplasties, Arthroscopic operations and Spinal axis correction operations being performed.

  13. Design Guidance for Computer-Based Procedures for Field Workers

    Energy Technology Data Exchange (ETDEWEB)

    Oxstrand, Johanna [Idaho National Lab. (INL), Idaho Falls, ID (United States); Le Blanc, Katya [Idaho National Lab. (INL), Idaho Falls, ID (United States); Bly, Aaron [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-09-01

    Nearly all activities that involve human interaction with nuclear power plant systems are guided by procedures, instructions, or checklists. Paper-based procedures (PBPs) currently used by most utilities have a demonstrated history of ensuring safety; however, improving procedure use could yield significant savings in increased efficiency, as well as improved safety through human performance gains. The nuclear industry is constantly trying to find ways to decrease human error rates, especially human error rates associated with procedure use. As a step toward the goal of improving field workers’ procedure use and adherence and hence improve human performance and overall system reliability, the U.S. Department of Energy Light Water Reactor Sustainability (LWRS) Program researchers, together with the nuclear industry, have been investigating the possibility and feasibility of replacing current paper-based procedures with computer-based procedures (CBPs). PBPs have ensured safe operation of plants for decades, but limitations in paper-based systems do not allow them to reach the full potential for procedures to prevent human errors. The environment in a nuclear power plant is constantly changing, depending on current plant status and operating mode. PBPs, which are static by nature, are being applied to a constantly changing context. This constraint often results in PBPs that are written in a manner that is intended to cover many potential operating scenarios. Hence, the procedure layout forces the operator to search through a large amount of irrelevant information to locate the pieces of information relevant for the task and situation at hand, which has potential consequences of taking up valuable time when operators must be responding to the situation, and potentially leading operators down an incorrect response path. Other challenges related to use of PBPs are management of multiple procedures, place-keeping, finding the correct procedure for a task, and relying

  14. Do absorption and realistic distraction influence performance of component task surgical procedure?

    Science.gov (United States)

    Pluyter, Jon R; Buzink, Sonja N; Rutkowski, Anne-F; Jakimowicz, Jack J

    2010-04-01

    Surgeons perform complex tasks while exposed to multiple distracting sources that may increase stress in the operating room (e.g., music, conversation, and unadapted use of sophisticated technologies). This study aimed to examine whether such realistic social and technological distracting conditions may influence surgical performance. Twelve medical interns performed a laparoscopic cholecystectomy task with the Xitact LC 3.0 virtual reality simulator under distracting conditions (exposure to music, conversation, and nonoptimal handling of the laparoscope) versus nondistracting conditions (control condition) as part of a 2 x 2 within-subject experimental design. Under distracting conditions, the medical interns showed a significant decline in task performance (overall task score, task errors, and operating time) and significantly increased levels of irritation toward both the assistant handling the laparoscope in a nonoptimal way and the sources of social distraction. Furthermore, individual differences in cognitive style (i.e., cognitive absorption and need for cognition) significantly influenced the levels of irritation experienced by the medical interns. The results suggest careful evaluation of the social and technological sources of distraction in the operation room to reduce irritation for the surgeon and provision of proper preclinical laparoscope navigation training to increase security for the patient.

  15. The design of operating procedures manuals for nuclear power plants

    International Nuclear Information System (INIS)

    Bohr, E.; Preuss, W.; Reinartz, G.; Thau, G.

    1977-03-01

    This report describes the findings of a research on the desirable design of operating procedures manuals for nuclear power plants. The work was supported by a grant of the Federal Department of the Interior. Information was acquired from different sources. Interviews and discussions on manual design were carried out with manual users in nuclear power plants. Moreover, tasks carried out using procedures were either observed or, alternatively, the manner of using procedures was elicited by interviews. In addition, manual writers, managers from manufacturers and utilities, nuclear experts, and individuals involved in manual specification activities were interviewed. A major source of information has been the pertinent scientific and technical findings scattered in the literature on topics such as instructional technology, engineering psychology, psycholinguistics, and typography. A comprehensive bibliography is included. General rules are established on designing instructional material for use on the job, aiming at increasing their legability, comprehensibility, and suitability to guide human performance. The application of these rules to the design of individual operating procedures is demonstrated. Recommendations are given on the design, layout, development and implementation of manuals. (orig.) [de

  16. Emergency procedures beyond design basis ''Feed and Bleed''

    International Nuclear Information System (INIS)

    Dominguez Bautista, M.T.; Campuzano Pena, F.

    1994-01-01

    The incorporation of Beyond-Design-Basis Emergency Procedures, also called the Emergency Manual or Severe Accident Manual, has been an important step forward in nuclear power plant safety. These procedures cover situations in which the deterministic criteria used in plant design have been contravened. In such situations new accident scenarios, unforeseen system actions or a combination of both, need to be considered. Establishing these procedures is actually the last in a sequence of activities the sequence includes definition of scenarios, study of their phenomena, analysis of optional system actions, verification of their effectiveness and finally, implementation of the procedure. The systematization of these new strategies is supported by the results of the probabilistic analyses which serve in this case to pinpoint the objectives of these strategies. This paper describes the application of this methodology in the definition of a procedure for heat sink recovery on the secondary side (feed and bleed) if this has been totally or partially lost in a beyond-design-basis event. (Author)

  17. Design Procedure on Stud Bolt for Reactor Vessel Assembly

    International Nuclear Information System (INIS)

    Kim, Jong-Wook; Lee, Gyu-Mahn; Jeoung, Kyeong-Hoon; Kim, Tae-Wan; Park, Keun-Bae; Kim, Keung-Koo

    2008-10-01

    The reactor pressure vessel flange is welded to the upper part of reactor pressure vessel, and there are stud holes to mount the closure head with stud bolts. The surface mating the closure head is compressed with O-ring, which acts as a sealing gasket to prevent coolant leakage. Bolted flange connections perform a very important structural role in the design of a reactor pressure vessel. Their importance stems from two important functions: (a) maintenance of the structural integrity of the connection itself, and (b) prevention of leakage through the O-ring preloaded by stud bolts. In the present study, an evaluation procedure for the design of stud bolt is developed to meet ASME code requirements. The developed design procedure could provide typical references in the development of advanced reactor design in the future

  18. Improvement of design of a surgical interface using an eye tracking device.

    Science.gov (United States)

    Erol Barkana, Duygun; Açık, Alper; Duru, Dilek Goksel; Duru, Adil Deniz

    2014-05-07

    Surgical interfaces are used for helping surgeons in interpretation and quantification of the patient information, and for the presentation of an integrated workflow where all available data are combined to enable optimal treatments. Human factors research provides a systematic approach to design user interfaces with safety, accuracy, satisfaction and comfort. One of the human factors research called user-centered design approach is used to develop a surgical interface for kidney tumor cryoablation. An eye tracking device is used to obtain the best configuration of the developed surgical interface. Surgical interface for kidney tumor cryoablation has been developed considering the four phases of user-centered design approach, which are analysis, design, implementation and deployment. Possible configurations of the surgical interface, which comprise various combinations of menu-based command controls, visual display of multi-modal medical images, 2D and 3D models of the surgical environment, graphical or tabulated information, visual alerts, etc., has been developed. Experiments of a simulated cryoablation of a tumor task have been performed with surgeons to evaluate the proposed surgical interface. Fixation durations and number of fixations at informative regions of the surgical interface have been analyzed, and these data are used to modify the surgical interface. Eye movement data has shown that participants concentrated their attention on informative regions more when the number of displayed Computer Tomography (CT) images has been reduced. Additionally, the time required to complete the kidney tumor cryoablation task by the participants had been decreased with the reduced number of CT images. Furthermore, the fixation durations obtained after the revision of the surgical interface are very close to what is observed in visual search and natural scene perception studies suggesting more efficient and comfortable interaction with the surgical interface. The

  19. Evaluation of robotic-assisted platysmaplasty procedures in a cadaveric model using the da Vinci Surgical System.

    Science.gov (United States)

    Taghizadeh, Farhan; Reiley, Carol; Mohr, Catherine; Paul, Malcolm

    2014-03-01

    We are evaluating the technical feasibility of robotic-assisted laparoscopic vertical-intermediate platysmaplasty in conjunction with an open rhytidectomy. In a cadaveric study, the da Vinci Surgical System was used to access certain angles in the lower neck that are difficult for traditional short incision, short flap procedures. Ergonomics, approach, and technical challenges were noted. To date, there are no published reports of robotic-assisted neck lifts, motivating us to assess its potential in this field of plastic surgery. Standard open technique short flap rhytidectomies with concurrent experimental robotic-assisted platysmaplasties (neck lifts) were performed on six cadavers with the da Vinci Si Surgical System(®) (Intuitive Surgical, Sunnyvale, CA, USA). The surgical procedures were performed on a diverse cadaver population from June 2011 to January 2012. The procedures included (1) submental incision and laser-assisted liposuction, (2) open rhytidectomy, and (3) robotic-assisted platysmaplasty using knot-free sutures. A variety of sutures and fat extraction techniques, coupled with 0° and 30° three-dimensional endoscopes, were utilized to optimize visualization of the platysma. An unaltered da Vinci Si Surgical System with currently available instruments was easily adaptable to neck lift surgery. Mid-neck platysma exposure was excellent, tissue handling was delicate and precise, and suturing was easily performed. Robotic-assisted surgery has the potential to improve outcomes in neck lifts by offering the ability to manipulate instruments with increased freedom of movement, scaled motion, tremor reduction, and stereoscopic three-dimensional visualization in the deep neck. Future clinical studies on live human patients can better assess subject and surgeon benefits arising from the use of the da Vinci system for neck lifts. Evidence obtained from multiple time series with or without the intervention, such as case studies. Dramatic results in

  20. Creating an animation-enhanced video library of hepato-pancreato-biliary and transplantation surgical procedures.

    Science.gov (United States)

    Fung, Albert; Kelly, Paul; Tait, Gordon; Greig, Paul D; McGilvray, Ian D

    2016-01-01

    The potential for integrating real-time surgical video and state-of-the art animation techniques has not been widely applied to surgical education. This paper describes the use of new technology for creating videos of liver, pancreas and transplant surgery, annotating them with 3D animations, resulting in a freely-accessible online resource: The Toronto Video Atlas of Liver, Pancreas and Transplant Surgery ( http://tvasurg.ca ). The atlas complements the teaching provided to trainees in the operating room, and the techniques described in this study can be readily adapted by other surgical training programmes.

  1. 40 CFR 240.205-2 - Recommended procedures: Design.

    Science.gov (United States)

    2010-07-01

    ... air pollution control technology. (b) All emissions, including dust from vents, should be controlled. ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Recommended procedures: Design. 240.205-2 Section 240.205-2 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID...

  2. A Survey study on design procedure of Seismic Base Isolation ...

    African Journals Online (AJOL)

    Adding shear walls or braced frames can decrease the potential damage caused by earthquakes.We can isolate the structures from the ground using the Seismic Base Isolation Systems that is flexible approach to decrease the potential damage. In this research we present information on the design procedure of seismic ...

  3. Novel design of honeybee-inspired needles for percutaneous procedure.

    Science.gov (United States)

    Sahlabadi, Mohammad; Hutapea, Parsaoran

    2018-04-18

    The focus of this paper is to present new designs of innovative bioinspired needles to be used during percutaneous procedures. Insect stingers have been known to easily penetrate soft tissues. Bioinspired needles mimicking the barbs in a honeybee stinger were developed for a smaller insertion force, which can provide a less invasive procedure. Decreasing the insertion force will decrease the tissue deformation, which is essential for more accurate targeting. In this study, some design parameters, in particular, barb shape and geometry (i.e. front angle, back angle, and height) were defined, and their effects on the insertion force were investigated. Three-dimensional printing technology was used to manufacture bioinspired needles. A specially-designed insertion test setup using tissue mimicking polyvinyl chloride (PVC) gels was developed to measure the insertion and extraction forces. The barb design parameters were then experimentally modified through detailed experimental procedures to further reduce the insertion force. Different scales of the barbed needles were designed and used to explore the size-scale effect on the insertion force. To further investigate the efficacy of the proposed needle design in real surgeries, preliminary ex vivo insertion tests into bovine liver tissue were performed. Our results show that the insertion force of the needles in different scales decreased by 21-35% in PVC gel insertion tests, and by 46% in bovine liver tissue insertion tests.

  4. Is mammary reconstruction with the anatomical Becker expander a simple procedure? Complications and hidden problems leading to secondary surgical procedures: a follow-up study.

    Science.gov (United States)

    Farace, Francesco; Faenza, Mario; Bulla, Antonio; Rubino, Corrado; Campus, Gian Vittorio

    2013-06-01

    Debate over the role of Becker expander implants (BEIs) in breast reconstruction is still ongoing. There are no clear indications for BEI use. The main indications for BEI use are one-stage breast reconstruction procedure and congenital breast deformities correction, due to the postoperative ability to vary BEI volume. Recent studies showed that BEIs were removed 5 years after mammary reconstruction in 68% of operated patients. This entails a further surgical procedure. BEIs should not, therefore, be regarded as one-stage prostheses. We performed a case-series study of breast reconstructions with anatomically shaped Becker-35™ implants, in order to highlight complications and to flag unseen problems, which might entail a second surgical procedure. A total of 229 patients, reconstructed from 2005 to 2010, were enrolled in this study. Data relating to implant type, volume, mean operative time and complications were recorded. All the patients underwent the same surgical procedure. The minimum follow-up period was 18 months. During a 5-year follow-up, 99 patients required secondary surgery to correct their complications or sequelae; 46 of them underwent BEI removal within 2 years of implantation, 56 within 3 years, 65 within 4 years and 74 within 5 years. Our findings show that two different sorts of complications can arise with these devices, leading to premature implant removal, one common to any breast implant and one peculiar to BEIs. The Becker implant is a permanent expander. Surgeons must, therefore, be aware that, once positioned, the Becker expander cannot be adjusted at a later date, as in two-stage expander/prosthesis reconstructions for instance. Surgeons must have a clear understanding of possible BEI complications in order to be able to discuss these with their patients. Therefore, only surgeons experienced in breast reconstruction should use BEIs. Copyright © 2013 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by

  5. Direct cellular vs. indirect pager communication during orthopaedic surgical procedures: a prospective study.

    Science.gov (United States)

    Ortega, Gil R; Taksali, Sudeep; Smart, Ryan; Baumgaertner, Michael R

    2009-01-01

    Cellular phone use within the hospital setting has increased as physicians, nurses, and ancillary staff incorporate wireless technologies in improving efficiencies, cost, and maintaining patient safety and high quality healthcare [11]. Through the use of wireless, cellular communication, an overall improvement in communication accuracy and efficiency between intraoperative orthopaedic surgeons and floor nurses may be achieved. Both communication types occurred while the surgeon was scrubbed in the operating room (OR). Indirect communication occurred when the pager call was answered by the OR circulating nurse with communication between the surgeon, circulating nurse, and floor nurse. Direct communication consisted of cell phone and Jabra Bluetooth BT200 wireless ear piece used by the surgeon. The surgeon answered the floor nurse's cellular call by phone ring-activated automatic answering. The study was conducted during scheduled orthopaedic procedures. An independent observer measured time variables with a stop-watch while orthopaedic nurses randomly called via pager or cell phone. The nurses asked for patient caregiver confirmation and answers to 30 different patient-care questions. Sixty trials were performed with 30 cell and 30 page communications. Direct cellular communication showed a better response rate than indirect page (Cell 100%, Page 73%). Indirect page communication allowed a 27% and 33% error rate with patient problem and surgeon solution communications, respectively. There were no reported communication errors while using direct wireless, cellular communication. When compared to page communications, cellular communications showed statistically significant improvements in mean time intervals in response time (Cell = 11s, Page = 211s), correct patient identification (Cell = 5s, Page = 172s), patient problem and solution time (Cell = 13s, Page = 189s), and total communication time (Cell = 32s, Page = 250s) (s = seconds, all P < 0.001). Floor nurse

  6. Immediate prostheses on one-piece trans-mucosal implants in flapless surgical procedures Case Series Report. Part I: full arch rehabilitations

    Directory of Open Access Journals (Sweden)

    Aris Petros Tripodakis

    2012-06-01

    Full Text Available Aim: The aim of the present case series report is to illustrate a clinical technique and present the application of onepiece transmucosal implants in flapless surgical procedures, supporting full arch immediate prostheses. Materials and methods: A total of 294 implants (Xive TG, Friadent, Germany have been used to support full arch immediate prostheses, over the last six years and have been in function for at least one year. The surgical placement of five or more implants per case involved immediate extraction and intrasocket flapless placement, combined with minimal flap elevation in the areas of healed extraction sites (43 mandibular and 7 maxillary arches. In all cases immediate provisionalization followed. Detailed three-dimensional cone-beam localized volumetric tomography preceeded the surgical procedures. The delivery of the final ceramo-metal prostheses was accomplished within a 20 day period. Materials and methods: Results Six implants failed to osseointegrate. All other implants are still successfully bearing the final prosthesis for the time that they have been followed. Soft tissue reaction was favorable from both the biologic and esthetic point of view. Conclusion: The flapless placement of one piece implants into edentulous healed sites is a predictable procedure in the presence of abundance of supporting bone as confirmed by 3-D imaging. On the other hand, immediate extraction placement of one piece implants allows the engagement of sound bone located deeper into the socket and provides adequate mechanical support of the soft tissue architecture that is preserved predictably. In all cases the prosthetic procedures are accomplished without disturbing the hardsoft tissue interface as the abutment-prosthesis interface is coronally elevated by the virtual design of the implant.

  7. PGSFR Core Thermal Design Procedure to Evaluate the Safety Margin

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Sun Rock; Kim, Sang-Ji [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-10-15

    The Korea Atomic Energy Research Institute (KAERI) has performed a SFR design with the final goal of constructing a prototype plant by 2028. The main objective of the SFR prototype plant is to verify the TRU metal fuel performance, reactor operation, and transmutation ability of high-level wastes. The core thermal design is to ensure the safe fuel performance during the whole plant operation. Compared to the critical heat flux in typical light water reactors, nuclear fuel damage in SFR subassemblies arises from a creep induced failure. The creep limit is evaluated based on the maximum cladding temperature, power, neutron flux, and uncertainties in the design parameters, as shown in Fig. 1. In this work, the core thermal design procedures are compared to verify the present PGSFR methodology based on the nuclear plant design criteria/guidelines and previous SFR thermal design methods. The PGSFR core thermal design procedure is verified based on the nuclear plant design criteria/guidelines and previous methods in LWRs and SFRs. The present method aims to directly evaluate the fuel cladding failure and to assure more safety margin. The 2 uncertainty is similar to 95% one-side tolerance limit of 1.96 in LWRs. The HCFs, ITDP, and MCM reveal similar uncertainty propagation for cladding midwall temperature for typical SFR conditions. The present HCFs are mainly employed from the CRBR except the fuel-related uncertainty such as an incorrect fuel distribution. Preliminary PGSFR specific HCFs will be developed by the end of 2015.

  8. Procedure for seismic evaluation and design of small bore piping

    International Nuclear Information System (INIS)

    Bilanin, W.; Sills, S.

    1991-01-01

    Simplified methods for the seismic design of small bore piping in nuclear power plants have teen used for many years. Various number of designers have developed unique methods to treat the large number of class 2 and 3 small bore piping systems. This practice has led to a proliferation of methods which are not standardized in the industry. These methods are generally based on enveloping the results of rigorous dynamic or conservative static analysis and result in an excessive number of supports and unrealistically high support loadings. Experience and test data have become available which warranted taking another look at the present methods for analysis of small bore piping. A recently completed Electric Power Research Institute and NCIG (a utility group) activity developed a new procedure for the seismic design and evaluation of small bore piping which provides significant safety and cost benefits. The procedure streamlines the approach to inertial stresses, which is the main feature that achieves the new benefits. Criteria in the procedure for seismic anchor movement and support design are based analysis and focus the designer on credible failure mechanisms. A walkdown of the as-constructed piping system to identify and eliminate undesirable piping features such as adverse spatial interaction is required

  9. Procedural Design of Exterior Lighting for Buildings with Complex Constraints

    KAUST Repository

    Schwarz, Michael

    2014-10-01

    We present a system for the lighting design of procedurally modeled buildings. The design is procedurally specified as part of the ordinary modeling workflow by defining goals for the illumination that should be attained and locations where luminaires may be installed to realize these goals. Additionally, constraints can be modeled that make the arrangement of the installed luminaires respect certain aesthetic and structural considerations. From this specification, the system automatically generates a lighting solution for any concrete model instance. The underlying, intricate joint optimization and constraint satisfaction problem is approached with a stochastic scheme that operates directly in the complex subspace where all constraints are observed. To navigate this subspace efficaciously, the actual lighting situation is taken into account. We demonstrate our system on multiple examples spanning a variety of architectural structures and lighting designs. Copyright held by the Owner/Author.

  10. Proposed design procedure for transmission shafting under fatigue loading

    Science.gov (United States)

    Loewenthal, S. H.

    1978-01-01

    The B106 American National Standards Committee is currently preparing a new standard for the design of transmission shafting. A design procedure, proposed for use in the new standard, for computing the diameter of rotating solid steel shafts under combined cyclic bending and steady torsion is presented. The formula is based on an elliptical variation of endurance strength with torque exhibited by combined stress fatigue data. Fatigue factors are cited to correct specimen bending endurance strength data for use in the shaft formula. A design example illustrates how the method is to be applied.

  11. Kinematic design considerations for minimally invasive surgical robots: an overview.

    Science.gov (United States)

    Kuo, Chin-Hsing; Dai, Jian S; Dasgupta, Prokar

    2012-06-01

    Kinematic design is a predominant phase in the design of robotic manipulators for minimally invasive surgery (MIS). However, an extensive overview of the kinematic design issues for MIS robots is not yet available to both mechanisms and robotics communities. Hundreds of archival reports and articles on robotic systems for MIS are reviewed and studied. In particular, the kinematic design considerations and mechanism development described in the literature for existing robots are focused on. The general kinematic design goals, design requirements, and design preferences for MIS robots are defined. An MIS-specialized mechanism, namely the remote center-of-motion (RCM) mechanism, is revisited and studied. Accordingly, based on the RCM mechanism types, a classification for MIS robots is provided. A comparison between eight different RCM types is given. Finally, several open challenges for the kinematic design of MIS robotic manipulators are discussed. This work provides a detailed survey of the kinematic design of MIS robots, addresses the research opportunity in MIS robots for kinematicians, and clarifies the kinematic point of view to MIS robots as a reference for the medical community. Copyright © 2012 John Wiley & Sons, Ltd.

  12. Finite element design procedure for correcting the coining die profiles

    Science.gov (United States)

    Alexandrino, Paulo; Leitão, Paulo J.; Alves, Luis M.; Martins, Paulo A. F.

    2018-05-01

    This paper presents a new finite element based design procedure for correcting the coining die profiles in order to optimize the distribution of pressure and the alignment of the resultant vertical force at the end of the die stroke. The procedure avoids time consuming and costly try-outs, does not interfere with the creative process of the sculptors and extends the service life of the coining dies by significantly decreasing the applied pressure and bending moments. The numerical simulations were carried out in a computer program based on the finite element flow formulation that is currently being developed by the authors in collaboration with the Portuguese Mint. A new experimental procedure based on the stack compression test is also proposed for determining the stress-strain curve of the materials directly from the coin blanks.

  13. Hospitals with greater diversities of physiologically complex procedures do not achieve greater surgical growth in a market with stable numbers of such procedures.

    Science.gov (United States)

    Dexter, Franklin; Epstein, Richard H; Lubarsky, David A

    2018-05-01

    Although having a large diversity of types of procedures has a substantial operational impact on the surgical suites of hospitals, the strategic importance is unknown. In the current study, we used longitudinal data for all hospitals and patient ages in the State of Florida to evaluate whether hospitals with greater diversity of types of physiologically complex major therapeutic procedures (PCMTP) also had greater rates of surgical growth. Observational cohort study. 1479 combinations of hospitals in the State of Florida and fiscal years, 2008-2015. The types of International Classification of Diseases, Ninth revision, Clinical Modification (ICD-9-CM) procedures studied were PCMT, defined as: a) major therapeutic procedure; b) >7 American Society of Anesthesiologists base units; and c) performed during a hospitalization with a Diagnosis Related Group with a mean length of stay ≥4.0days. The number of procedures of each type of PCMTP commonly performed at each hospital was calculated by taking 1/Herfindahl index (i.e., sum of the squares of the proportions of all procedures of each type of PCMTP). Over the 8 successive years studied, there was no change in the number of PCMTP being performed (Kendall's τ b =-0.014±0.017 [standard error], P=0.44; N=1479 hospital×years). Busier and larger hospitals commonly performed more types of PCMTP, respectively categorized based on performed PCMTP (τ=0.606±0.017, P<0.0001) or hospital beds (τ=0.524±0.017, P<0.0001). There was no association between greater diversity of types of PCMTP commonly performed and greater annual growth in numbers of PCMTP (τ=0.002±0.019, P=0.91; N=1295 hospital×years). Conclusions were the same with multiple sensitivity analyses. Post hoc, it was recognized that hospitals performing a greater diversity of PCMTP were more similar to the aggregate of other hospitals within the same health district (τ=0.550±0.017, P<0.0001). During a period with no overall growth in PCMTP, hospitals with

  14. The Importance of Perioperative Prophylaxis with Cefuroxime or Ceftriaxone in the Surgical Site Infections Prevention after Cranial and Spinal Neurosurgical Procedures.

    Science.gov (United States)

    Dimovska-Gavrilovska, Aleksandra; Chaparoski, Aleksandar; Gavrilovski, Andreja; Milenkovikj, Zvonko

    2017-09-01

    Introduction Surgical site infections pose a significant problem in the treatment of neurosurgical procedures, regardless of the application of perioperative prophylaxis with systemic antibiotics. The infection rate in these procedures ranges from less than 1% to above 15%. Different antibiotics and administration regimes have been used in the perioperative prophylaxis so far, and there are numerous comparative studies regarding their efficiency, however, it is generally indicated that the choice thereof should be based on information and local specifics connected to the most probable bacterial causers, which would possibly contaminate the surgical site and cause infection, and moreover, the mandatory compliance with the principles of providing adequate concentration of the drug at the time of the anticipated contamination. Objective Comparing the protective effect of two perioperative prophylactic antibiotic regimes using cefuroxime (second generation cephalosporin) and ceftriaxone (third generation cephalosporin) in the prevention of postoperative surgical site infections after elective and urgent cranial and spinal neurosurgical procedures at the University Clinic for Neurosurgery in Skopje in the period of the first three months of 2016. Design of the study Prospective randomized comparative study. Outcome measures Establishing the clinical outcome represented as prevalence of superficial and deep incision and organ/space postoperative surgical site infections. Material and method We analyzed prospectively 40 patients who received parenteral antibiotic prophylaxis with two antibiotic regimes one hour before the routine neurosurgical cranial and spinal surgical procedures; the patients were randomized in two groups, according to the order of admission and participation in the study, alternately, non-selectively, those persons who fulfilled inclusion criteria were placed in one of the two programmed regimes with cefuroxime in the first, and cefotaxime in the

  15. Surgical Procedures and Clinical Considerations for Impacted Canines: A Literature Review

    Directory of Open Access Journals (Sweden)

    Parviz Torkzaban

    2016-09-01

    Full Text Available Impaction of canine teeth is a clinical problem whose treatment usually requires an interdisciplinary approach. After the maxillary third molar, the maxillary canine is the second-most commonly impacted tooth, with an incidence of 1% - 2.5%. Maxillary canines are more common in females than males. This study reviews the surgical treatments and orthodontic considerations for impacted canines exposure reported in previous studies. The clinician should be aware of variations in the surgical management of labially and palatally impacted canines, as well as the most common methods of canine in orthodontic application, and the implications of canine extraction. The different factors that affect these decisions are discussed.

  16. On the design of flight-deck procedures

    Science.gov (United States)

    Degani, Asaf; Wiener, Earl L.

    1994-01-01

    In complex human-machine systems, operations, training, and standardization depend on a elaborate set of procedures which are specified and mandated by the operational management of the organization. The intent is to provide guidance to the pilots, to ensure a logical, efficient, safe, and predictable means of carrying out the mission objectives. In this report the authors examine the issue of procedure use and design from a broad viewpoint. The authors recommend a process which we call 'The Four P's:' philosophy, policies, procedures, and practices. We believe that if an organization commits to this process, it can create a set of procedures that are more internally consistent, less confusing, better respected by the flight crews, and that will lead to greater conformity. The 'Four-P' model, and the guidelines for procedural development in appendix 1, resulted from cockpit observations, extensive interviews with airline management and pilots, interviews and discussion at one major airframe manufacturer, and an examination of accident and incident reports. Although this report is based on airline operations, we believe that the principles may be applicable to other complex, high-risk systems, such as nuclear power production, manufacturing process control, space flight, and military operations.

  17. Minimally invasive myotomy for the treatment of esophageal achalasia: evolution of the surgical procedure and the therapeutic algorithm.

    Science.gov (United States)

    Bresadola, Vittorio; Feo, Carlo V

    2012-04-01

    Achalasia is a rare disease of the esophagus, characterized by the absence of peristalsis in the esophageal body and incomplete relaxation of the lower esophageal sphincter, which may be hypertensive. The cause of this disease is unknown; therefore, the aim of the therapy is to improve esophageal emptying by eliminating the outflow resistance caused by the lower esophageal sphincter. This goal can be accomplished either by pneumatic dilatation or surgical myotomy, which are the only long-term effective therapies for achalasia. Historically, pneumatic dilatation was preferred over surgical myotomy because of the morbidity associated with a thoracotomy or a laparotomy. However, with the development of minimally invasive techniques, the surgical approach has gained widespread acceptance among patients and gastroenterologists and, consequently, the role of surgery has changed. The aim of this study was to review the changes occurred in the surgical treatment of achalasia over the last 2 decades; specifically, the development of minimally invasive techniques with the evolution from a thoracoscopic approach without an antireflux procedure to a laparoscopic myotomy with a partial fundoplication, the changes in the length of the myotomy, and the modification of the therapeutic algorithm.

  18. The bilateral bispectral and the composite variability indexes during anesthesia for unilateral surgical procedure

    Directory of Open Access Journals (Sweden)

    Pedro Lopes-Pimentel

    2017-01-01

    Conclusions: Our results indicate that the large interindividual variability of BIS and CVI limits their usefulness. We found differences between the left and right measurements in a right-handed series of patients during surgical stimuli though they were not clinically relevant.

  19. Robot-Assisted Fracture Surgery: Surgical Requirements and System Design.

    Science.gov (United States)

    Georgilas, Ioannis; Dagnino, Giulio; Tarassoli, Payam; Atkins, Roger; Dogramadzi, Sanja

    2018-03-09

    The design of medical devices is a complex and crucial process to ensure patient safety. It has been shown that improperly designed devices lead to errors and associated accidents and costs. A key element for a successful design is incorporating the views of the primary and secondary stakeholders early in the development process. They provide insights into current practice and point out specific issues with the current processes and equipment in use. This work presents how information from a user-study conducted in the early stages of the RAFS (Robot Assisted Fracture Surgery) project informed the subsequent development and testing of the system. The user needs were captured using qualitative methods and converted to operational, functional, and non-functional requirements based on the methods derived from product design and development. This work presents how the requirements inform a new workflow for intra-articular joint fracture reduction using a robotic system. It is also shown how the various elements of the system are developed to explicitly address one or more of the requirements identified, and how intermediate verification tests are conducted to ensure conformity. Finally, a validation test in the form of a cadaveric trial confirms the ability of the designed system to satisfy the aims set by the original research question and the needs of the users.

  20. Measuring surgical outcomes in neurosurgery: implementation, analysis, and auditing a prospective series of more than 5000 procedures.

    Science.gov (United States)

    Theodosopoulos, Philip V; Ringer, Andrew J; McPherson, Christopher M; Warnick, Ronald E; Kuntz, Charles; Zuccarello, Mario; Tew, John M

    2012-11-01

    Health care reform debate includes discussions regarding outcomes of surgical interventions. Yet quality of medical care, when judged as a health outcome, is difficult to define because of impediments affecting accuracy in data collection, analysis, and reporting. In this prospective study, the authors report the outcomes for neurosurgical treatment based on point-of-care interactions recorded in the electronic medical record (EMR). The authors' neurosurgery practice collected outcome data for 19 physicians and ancillary personnel using the EMR. Data were analyzed for 5361 consecutive surgical cases, either elective or emergency procedures, performed during 2009 at multiple hospitals, offices, and an ambulatory spine surgery center. Main outcomes included complications, length of stay (LOS), and discharge disposition for all patients and for certain frequently performed procedures. Physicians, nurses, and other medical staff used validated scales to record the hospital LOS, complications, disposition at discharge, and return to work. Of the 5361 surgical procedures performed, two-thirds were spinal procedures and one-third were cranial procedures. Organization-wide compliance with reporting rates of major complications improved throughout the year, from 80.7% in the first quarter to 90.3% in the fourth quarter. Auditing showed that rates of unreported complications decreased from 11% in the first quarter to 4% in the fourth quarter. Complication data were available for 4593 procedures (85.7%); of these, no complications were reported in 4367 (95.1%). Discharge dispositions reported were home in 86.2%, rehabilitation center in 8.9%, and nursing home in 2.5%. Major complications included culture-proven infection in 0.61%, CSF leak in 0.89%, reoperation within the same hospitalization in 0.38%, and new neurological deficits in 0.77%. For the commonly performed procedures, the median hospital LOS was 3 days for craniotomy for aneurysm or intraaxial tumor and less than

  1. Plastic surgery: quo vadis? Current trends and future projections of aesthetic plastic surgical procedures in the United States.

    Science.gov (United States)

    Broer, P Niclas; Levine, Steven M; Juran, Sabrina

    2014-03-01

    The objective of this article was to evaluate past and current trends regarding aesthetic operations in the United States and to project future changes regarding such procedures. Cosmetic surgery statistics from the American Society for Aesthetic Plastic Surgery from 1997 to 2012 were analyzed by sex, age, and ethnic group. Then, using population projections from the U.S. Census Bureau based on the 2010 census, two projection scenarios of the expected number of aesthetic plastic surgery procedures were generated. The scenarios included the presumed occurrence and nonoccurrence of a recession like that which occurred in 2007. Aesthetic procedures are expected to grow from 1,688,694 in 2012 to 3,847,929 by 2030, representing an average annual growth rate of 7.1 percent. Should another recession of similar degree to the one in 2007 occur, procedures would increase to only 2,086,994, displaying an average annual growth percentage rate of 1.3 percent. Because the age distribution of the patient population will change, preferences for specific procedures according to age influence-and thus are reflected in-future demand for those procedures. Furthermore, the ethnic profile of patients will change significantly, with 32 percent of all procedures being performed on patients other than Caucasians by 2030. Demand for aesthetic plastic surgical procedures is expected to continue to grow, while depending on the economic performance at the macro level and changing demographic dynamics of the U.S. population. Considering all investigated factors and trends among all patients, the most commonly requested procedures by 2030 are likely to be (1) breast augmentations, (2) lipoplasties, and (3) blepharoplasties.

  2. Do Additional Cardiac Surgical Procedures Increase the Surgical Risk in Patients 80 Years of age or Older Undergoing Coronary Bypass Gragting

    Directory of Open Access Journals (Sweden)

    Korhan Erkanlı

    2014-03-01

    Full Text Available Aim: In association with increasing life expectancy, the number of elderly individuals undergoing coronary bypass grafting (CABG and additional cardiac surgical procedures are increasing. In this study, we evaluated the effects of additional cardiac procedures and preoperative risk factors for postoperative mortality and morbidity in patients 80 years of age and older. Methods: The records of 29 patients aged 80 years and older (82.86±2.91 who had undergone coronary bypass surgery in the department of cardiac surgery between September 2009 and June 2012, were retrospectively reviewed. The subjects were divided into two groups: group 1 included the patients who had undergone CABG, group 2 consisted of those who had undergone CABG and additional cardiac procedures. Results: The mean age of the patients [14 male (48.3% 15 female (51.7%] was 82.86±2.91 years. The left internal thoracic artery was harvested for all patients. The mean number of graft per patient was 3.07±0.95. Carotid endarterectomy was performed in 3 patients before CABG. CABG and aortic valve replacement were performed in 1 patient. CABG, mitral valve replacement ant tricuspid plasty were performed in another patient. Furthermore, in one patient, abdominal aortic graft replacement due to ruptured abdominal aortic aneurysm and CABG was performed at the same session. The mean EuroSCORE was 5.06±5.16. Postoperative 30 days mortality was 6.8%, and the mean length of stay in hospital was 10.45±8.18 days. Conclusion: Coronary bypass surgery is an acceptable treatment method in patients 80 years of age and older. Although additional cardiac procedures may increase sugical risks, they can be successfully performed. (The Me­di­cal Bul­le­tin of Ha­se­ki 2014; 52: 14-8

  3. The meniscus tear. State of the art of rehabilitation protocols related to surgical procedures.

    Science.gov (United States)

    Frizziero, Antonio; Ferrari, Raffaello; Giannotti, Erika; Ferroni, Costanza; Poli, Patrizia; Masiero, Stefano

    2012-10-01

    Meniscal injuries represent one of the most frequent lesions in sport practicing and in particular in soccer players and skiers. Pain, functional limitation and swelling are typical symptoms associated with meniscal tears. Epidemiological studies showed that all meniscal lesions, in different sports athletes, involves 24% of medial meniscus, while 8% of lateral meniscus and about 20-30% of meniscal lesions are associated with other ligament injuries. Meniscal tears can be treated conservatively or surgically. Surgery leads in many cases to complete resolution of symptoms and allows the return to sport activity. However many studies show that this treatment can induce more frequently the development of degenerative conditions if not correctly associated to a specific rehabilitation protocol. The aim of this article is to compare different timing in specific rehabilitation programs related to the most actual surgical options.

  4. Teaching Surgical Procedures with Movies: Tips for High-quality Video Clips

    OpenAIRE

    Jacquemart, Mathieu; Bouletreau, Pierre; Breton, Pierre; Mojallal, Ali; Sigaux, Nicolas

    2016-01-01

    Summary: Video must now be considered as a precious tool for learning surgery. However, the medium does present production challenges, and currently, quality movies are not always accessible. We developed a series of 7 surgical videos and made them available on a publicly accessible internet website. Our videos have been viewed by thousands of people worldwide. High-quality educational movies must respect strategic and technical points to be reliable.

  5. Teaching Surgical Procedures with Movies: Tips for High-quality Video Clips.

    Science.gov (United States)

    Jacquemart, Mathieu; Bouletreau, Pierre; Breton, Pierre; Mojallal, Ali; Sigaux, Nicolas

    2016-09-01

    Video must now be considered as a precious tool for learning surgery. However, the medium does present production challenges, and currently, quality movies are not always accessible. We developed a series of 7 surgical videos and made them available on a publicly accessible internet website. Our videos have been viewed by thousands of people worldwide. High-quality educational movies must respect strategic and technical points to be reliable.

  6. Creation and Global Deployment of a Mobile, Application-Based Cognitive Simulator for Cardiac Surgical Procedures.

    Science.gov (United States)

    Brewer, Zachary E; Ogden, William David; Fann, James I; Burdon, Thomas A; Sheikh, Ahmad Y

    Several modern learning frameworks (eg, cognitive apprenticeship, anchored instruction, and situated cognition) posit the utility of nontraditional methods for effective experiential learning. Thus, development of novel educational tools emphasizing the cognitive framework of operative sequences may be of benefit to surgical trainees. We propose the development and global deployment of an effective, mobile cognitive cardiac surgical simulator. In methods, 16 preclinical medical students were assessed. Overall, 4 separate surgical modules (sternotomy, cannulation, decannulation, and sternal closure) were created utilizing the Touch Surgery (London, UK) platform. Modules were made available to download free of charge for use on mobile devices. Usage data were collected over a 6-month period. Educational efficacy of the modules was evaluated by randomizing a cohort of medical students to either module usage or traditional, reading-based self-study, followed by a multiple-choice learning assessment tool. In results, downloads of the simulator achieved global penetrance, with highest usage in the USA, Brazil, Italy, UK, and India. Overall, 5368 unique users conducted a total of 1971 hours of simulation. Evaluation of the medical student cohort revealed significantly higher assessment scores in those randomized to module use versus traditional reading (75% ± 9% vs 61% ± 7%, respectively; P < 0.05). In conclusion, this study represents the first effort to create a mobile, interactive cognitive simulator for cardiac surgery. Simulators of this type may be effective for the training and assessment of surgical students. We investigated whether an interactive, mobile-computing-based cognitive task simulator for cardiac surgery could be developed, deployed, and validated. Our findings suggest that such simulators may be a useful learning tool. Copyright © 2016. Published by Elsevier Inc.

  7. Do absorption and realistic distraction influence performance of component task surgical procedure?

    OpenAIRE

    Pluyter, J.R.; Buzink, S.N.; Rutkowski, A.F.; Jakimowicz, J.J.

    2009-01-01

    Background. Surgeons perform complex tasks while exposed to multiple distracting sources that may increase stress in the operating room (e.g., music, conversation, and unadapted use of sophisticated technologies). This study aimed to examine whether such realistic social and technological distracting conditions may influence surgical performance. Methods. Twelve medical interns performed a laparoscopic cholecystectomy task with the Xitact LC 3.0 virtual reality simulator under distracting con...

  8. Comprehensive evaluation of occupational radiation exposure to intraoperative and perioperative personnel from 18F-FDG radioguided surgical procedures

    International Nuclear Information System (INIS)

    Povoski, Stephen P.; Martin, Edward W.; Sarikaya, Ismet; Hall, Nathan C.; Knopp, Michael V.; White, William C.; Marsh, Steven G.; Hinkle, George H.

    2008-01-01

    The purpose of the current study was to comprehensively evaluate occupational radiation exposure to all intraoperative and perioperative personnel involved in radioguided surgical procedures utilizing 18 F-fluorodeoxyglucose ( 18 F-FDG). Radiation exposure to surgeon, anesthetist, scrub technologist, circulating nurse, preoperative nurse, and postoperative nurse, using aluminum oxide dosimeters read by optically stimulated luminescence technology, was evaluated during ten actual radioguided surgical procedures involving administration of 18 F-FDG. Mean patient dosage of 18 F-FDG was 699 ± 181 MBq (range 451-984). Mean time from 18 F-FDG injection to initial exposure of personnel to the patient was shortest for the preoperative nurse (75 ± 63 min, range 0-182) followed by the circulating nurse, anesthetist, scrub technologist, surgeon, and postoperative nurse. Mean total time of exposure of the personnel to the patient was longest for the anesthetist (250 ± 128 min, range 69-492) followed by the circulating nurse, scrub technologist, surgeon, postoperative nurse, and preoperative nurse. Largest deep dose equivalent per case was received by the surgeon (164 ± 135 μSv, range 10-580) followed by the anesthetist, scrub technologist, postoperative nurse, circulating nurse, and preoperative nurse. Largest deep dose equivalent per hour of exposure was received by the preoperative nurse (83 ± 134 μSv/h, range 0-400) followed by the surgeon, anesthetist, postoperative nurse, scrub technologist, and circulating nurse. On a per case basis, occupational radiation exposure to intraoperative and perioperative personnel involved in 18 F-FDG radioguided surgical procedures is relatively small. Development of guidelines for monitoring occupational radiation exposure in 18 F-FDG cases will provide reassurance and afford a safe work environment for such personnel. (orig.)

  9. Temporomandibular joint ankylosis: Case-series of two different surgical procedures

    Directory of Open Access Journals (Sweden)

    Gholamreza Shirani

    2014-01-01

    Full Text Available Introducation: The long-term outcome and clinical results of gaparthroplasty used for the treatment of condylar ankylosis of the mandible in children with application of postoperative activator appliances and costochondral rib graft are evaluated and compared. The purpose of this study was to compare the effect of gap arthroplasty and costochondral graft methods on reankylosis, a mount of mouth opening and growth. Materials and Methods: A non-randomized, retrospective clinical study of l0 cases (5-12 years old of condylar ankylosis of the mandible, surgically treated during a 10 year period from 2002 to 2012 was performed. Four patients were treated by condylectomy and interpositional flap, whereas six were treated by condylectomy and immediate costachondral rib grafts. The first group underwent long-term postoperative therapy using removable activator appliances. Casts, radiographs, photographs, and computed tomography (CT were used post surgically to evaluate rib graft, condylar growth and function, occlusion, facial, and condylar symmetry. Data were analyzed by SPSS 16 statistical software using Mann-Whitney, Paired T-test and Chi-square tests. Results: Children with long-standing condylar ankylosis of the mandible treated by condylectomy and interpositional flap showed more favorably when activators were used post-surgically. Conclusions: Gaparthroplasty with functional activator post-operatively can be considering for TMJ ankylosis.

  10. Surgical treatment of infective endocarditis in active intravenous drug users: a justified procedure?

    Science.gov (United States)

    Weymann, Alexander; Borst, Tobias; Popov, Aron-Frederik; Sabashnikov, Anton; Bowles, Christopher; Schmack, Bastian; Veres, Gabor; Chaimow, Nicole; Simon, Andre Rüdiger; Karck, Matthias; Szabo, Gábor

    2014-03-24

    Infective endocarditis is a life threatening complication of intravenous drug abuse, which continues to be a major burden with inadequately characterised long-term outcomes. We reviewed our institutional experience of surgical treatment of infective endocarditis in active intravenous drug abusers with the aim of identifying the determinants long-term outcome of this distinct subgroup of infective endocarditis patients. A total of 451 patients underwent surgery for infective endocarditis between January 1993 and July 2013 at the University Hospital of Heidelberg. Of these patients, 20 (7 female, mean age 35 ± 7.7 years) underwent surgery for infective endocarditis with a history of active intravenous drug abuse. Mean follow-up was 2504 ± 1842 days. Staphylococcus aureus was the most common pathogen detected in preoperative blood cultures. Two patients (10%) died before postoperative day 30. Survival at 1, 5 and 10 years was 90%, 85% and 85%, respectively. Freedom from reoperation was 100%. Higher NYHA functional class, higher EuroSCORE II, HIV infection, longer operating time, postoperative fever and higher requirement for red blood cell transfusion were associated with 90-day mortality. In active intravenous drug abusers, surgical treatment for infective endocarditis should be performed as extensively as possible and be followed by an aggressive postoperative antibiotic therapy to avoid high mortality. Early surgical intervention is advisable in patients with precipitous cardiac deterioration and under conditions of staphylococcal endocarditis. However, larger studies are necessary to confirm our preliminary results.

  11. Making Safe Surgery Affordable: Design of a Surgical Drill Cover System for Scale.

    Science.gov (United States)

    Buchan, Lawrence L; Black, Marianne S; Cancilla, Michael A; Huisman, Elise S; Kooyman, Jeremy J R; Nelson, Scott C; OʼHara, Nathan N; OʼBrien, Peter J; Blachut, Piotr A

    2015-10-01

    Many surgeons in low-resource settings do not have access to safe, affordable, or reliable surgical drilling tools. Surgeons often resort to nonsterile hardware drills because they are affordable, robust, and efficient, but they are impossible to sterilize using steam. A promising alternative is to use a Drill Cover system (a sterilizable fabric bag plus surgical chuck adapter) so that a nonsterile hardware drill can be used safely for surgical bone drilling. Our objective was to design a safe, effective, affordable Drill Cover system for scale in low-resource settings. We designed our device based on feedback from users at Mulago Hospital (Kampala, Uganda) and focused on 3 main aspects. First, the design included a sealed barrier between the surgical field and hardware drill that withstands pressurized fluid. Second, the selected hardware drill had a maximum speed of 1050 rpm to match common surgical drills and reduce risk of necrosis. Third, the fabric cover was optimized for ease of assembly while maintaining a sterile technique. Furthermore, with the Drill Cover approach, multiple Drill Covers can be provided with a single battery-powered drill in a "kit," so that the drill can be used in back-to-back surgeries without requiring immediate sterilization. The Drill Cover design presented here provides a proof-of-concept for a product that can be commercialized, produced at scale, and used in low-resource settings globally to improve access to safe surgery.

  12. Medical tongue piercing – development and evaluation of a surgical protocol and the perception of procedural discomfort of the participants

    Science.gov (United States)

    2014-01-01

    Background A system providing disabled persons with control of various assistive devices with the tongue has been developed at Aalborg University in Denmark. The system requires an activation unit attached to the tongue with a small piercing. The aim of this study was to establish and evaluate a safe and tolerable procedure for medical tongue piercing and to evaluate the expected and perceived procedural discomfort. Methods Four tetraplegic subjects volunteered for the study. A surgical protocol for a safe insertion of a tongue barbell piercing was presented using sterilized instruments and piercing parts. Moreover, post-procedural observations of participant complications such as bleeding, edema, and infection were recorded. Finally, procedural discomforts were monitored by VAS scores of pain, changes in taste and speech as well as problems related to hitting the teeth. Results The piercings were all successfully inserted in less than 5 min and the pain level was moderate compared with oral injections. No bleeding, infection, embedding of the piercing, or tooth/gingival injuries were encountered; a moderate edema was found in one case without affecting the speech. In two cases the piercing rod later had to be replaced by a shorter rod, because participants complained that the rod hit their teeth. The replacements prevented further problems. Moreover, loosening of balls was encountered, which could be prevented with the addition of dental glue. No cases of swallowing or aspiration of the piercing parts were recorded. Conclusions The procedure proved simple, fast, and safe for insertion of tongue piercings for tetraplegic subjects in a clinical setting. The procedure represented several precautions in order to avoid risks in these susceptible participants with possible co-morbidity. No serious complications were encountered, and the procedure was found tolerable to the participants. The procedure may be used in future studies with tongue piercings being a

  13. Urinary Retention as the Only Symptom of Retained Surgical Sponge (Gossypiboma, 29 Years After Cesarean Procedure

    Directory of Open Access Journals (Sweden)

    Charalampos Konstantinidis

    2017-02-01

    Full Text Available A 68 year old lady presented to urology department suffering from acute urinary retention. The U/S revealed hydronephrosis in left kidney and a mass at the left side of the small pelvis which pushed forward the uterus and the bladder. The CT scan confirmed a mixed (solid and cystic mass, with diameter of 12 cm with interpretation of the left ovary. The patient underwent laparotomy and the mass was excised after a difficult dissection due to severe adhesion with the bowel. The well-capsulated mass was a retained surgical sponge. The patient had undergone cesarean procedure 29 years ago.

  14. Robotic-assisted transperitoneal nephron-sparing surgery for small renal masses with associated surgical procedures: surgical technique and preliminary experience.

    Science.gov (United States)

    Ceccarelli, Graziano; Codacci-Pisanelli, Massimo; Patriti, Alberto; Ceribelli, Cecilia; Biancafarina, Alessia; Casciola, Luciano

    2013-09-01

    Small renal masses (T1a) are commonly diagnosed incidentally and can be treated with nephron-sparing surgery, preserving renal function and obtaining the same oncological results as radical surgery. Bigger lesions (T1b) may be treated in particular situations with a conservative approach too. We present our surgical technique based on robotic assistance for nephron-sparing surgery. We retrospectively analysed our series of 32 consecutive patients (two with 2 tumours and one with 4 bilateral tumours), for a total of 37 robotic nephron-sparing surgery (RNSS) performed between June 2008 and July 2012 by a single surgeon (G.C.). The technique differs depending on tumour site and size. The mean tumour size was 3.6 cm; according to the R.E.N.A.L. Nephrometry Score 9 procedures were considered of low, 14 of moderate and 9 of hight complexity with no conversion in open surgery. Vascular clamping was performed in 22 cases with a mean warm ischemia time of 21.5 min and the mean total procedure time was 149.2 min. Mean estimated blood loss was 187.1 ml. Mean hospital stay was 4.4 days. Histopathological evaluation confirmed 19 cases of clear cell carcinoma (all the multiple tumours were of this nature), 3 chromophobe tumours, 1 collecting duct carcinoma, 5 oncocytomas, 1 leiomyoma, 1 cavernous haemangioma and 2 benign cysts. Associated surgical procedures were performed in 10 cases (4 cholecystectomies, 3 important lyses of peritoneal adhesions, 1 adnexectomy, 1 right hemicolectomy, 1 hepatic resection). The mean follow-up time was 28.1 months ± 12.3 (range 6-54). Intraoperative complications were 3 cases of important bleeding not requiring conversion to open or transfusions. Regarding post-operative complications, there were a bowel occlusion, 1 pleural effusion, 2 pararenal hematoma, 3 asymptomatic DVT (deep vein thrombosis) and 1 transient increase in creatinine level. There was no evidence of tumour recurrence in the follow-up. RNSS is a safe and feasible technique

  15. The TVT-obturator surgical procedure for the treatment of female stress urinary incontinence: a clinical update.

    Science.gov (United States)

    Waltregny, David; de Leval, Jean

    2009-03-01

    Six years ago, the inside-out transobturator tape TVT-O procedure was developed for the surgical treatment of female stress urinary incontinence (SUI) with the aim of minimizing the risk of urethra and bladder injuries and ensuring minimal tissue dissection. Initial feasibility and efficacy studies suggested that the TVT-O procedure is associated with high SUI cure rates and low morbidity at short term. A recent analysis of medium-term results indicated that the TVT-O procedure is efficient, with maintenance, after a 3-year minimum follow-up, of cure rates comparing favorably with those reported for TVT. No late complications were observed. As of July 2008, more than 35 clinical papers, including ten randomized trials and two national registries, have been published on the outcome of the TVT-O surgery. Results from these studies have confirmed that the TVT-O procedure is safe and as efficient as the TVT procedure, at least in the short/medium term.

  16. Revised MITG design, fabrication procedure, and performance predictions

    International Nuclear Information System (INIS)

    Schock, A.

    1983-01-01

    The design, analysis, and key features of the Modular Isotopic Thermoelectric Generator (MITG) were described in a 1981 IECEC paper; and the design, fabrication, testing, and post-test analysis of test assemblies simulating prototypical MITG modules were described in preceding papers in these proceedings. These analyses succeeded in identifying and explaining the principal causes of thermal-stress problems encountered in the tests, and in confirming the effectiveness of design changes for alleviating them. The present paper presents additional design improvements for solving these and other problems, and describes new thermoelectric material properties generated by independent laboratories over the past two years. Based on these changes and on a revised fabrication procedure, it presents a reoptimization of the MITG design and computes the power-to-weight ratio for the revised design. That ratio is appreciably lower than the 1981 prediction, primarily because of changes in material properties; but it is still much higher than the specific power of current-generation RTGs

  17. Update on dexmedetomidine: use in nonintubated patients requiring sedation for surgical procedures

    Directory of Open Access Journals (Sweden)

    Mohanad Shukry

    2010-03-01

    Full Text Available Mohanad Shukry, Jeffrey A MillerUniversity of Oklahoma Health Sciences Center, Department of Anesthesiology, Children’s Hospital of Oklahoma, Oklahoma City, OK, USAAbstract: Dexmedetomidine was introduced two decades ago as a sedative and supplement to sedation in the intensive care unit for patients whose trachea was intubated. However, since that time dexmedetomidine has been commonly used as a sedative and hypnotic for patients undergoing procedures without the need for tracheal intubation. This review focuses on the application of dexmedetomidine as a sedative and/or total anesthetic in patients undergoing procedures without the need for tracheal intubation. Dexmedetomidine was used for sedation in monitored anesthesia care (MAC, airway procedures including fiberoptic bronchoscopy, dental procedures, ophthalmological procedures, head and neck procedures, neurosurgery, and vascular surgery. Additionally, dexmedetomidine was used for the sedation of pediatric patients undergoing different type of procedures such as cardiac catheterization and magnetic resonance imaging. Dexmedetomidine loading dose ranged from 0.5 to 5 μg kg-1, and infusion dose ranged from 0.2 to 10 μg kg-1 h-1. Dexmedetomidine was administered in conjunction with local anesthesia and/or other sedatives. Ketamine was administered with dexmedetomidine and opposed its bradycardiac effects. Dexmedetomidine may by useful in patients needing sedation without tracheal intubation. The literature suggests potential use of dexmedetomidine solely or as an adjunctive agent to other sedation agents. Dexmedetomidine was especially useful when spontaneous breathing was essential such as in procedures on the airway, or when sudden awakening from sedation was required such as for cooperative clinical examination during craniotomies.Keywords: dexmedetomidine, sedation, nonintubated patients

  18. LASL lens design procedure: simple, fast, precise, versatile

    International Nuclear Information System (INIS)

    Brixner, B.

    1978-11-01

    The Los Alamos Scientific Laboratory general-purpose lens design procedure optimizes specific lens prescriptions to obtain the smallest possible image spots and therefore near-spherical wave fronts of light converging on all images in the field of view. Optical image errors are analyzed in much the same way that they are measured on the optical bench. This lens design method is made possible by using the full capabilities of large electronic computers. First, the performance of the whole lens is sampled with many precisely traced skew rays. Next, lens performance is analyzed with spot diagrams generated by the many rays. Third, lens performance is optimized with a least squares system aimed at reducing all image errors to zero. This statistical approach to lens design uses skew rays and precisely measured ray deviations from ideal image points to achieve greater accuracy than was possible with the classical procedure, which is based on approximate expressions derived from simplified ray traces developed for pencil-and-paper calculations

  19. Design Procedure of Graphite Components by ASME HTR Codes

    International Nuclear Information System (INIS)

    Kang, Ji-Ho; Jo, Chang Keun

    2016-01-01

    In this study, the ASME B and PV Code, Subsection HH, Subpart A, design procedure for graphite components of HTRs was reviewed and the differences from metal materials were remarked. The Korean VHTR has a prismatic core which is made of multiple graphite blocks, reflectors, and core supports. One of the design issues is the assessment of the structural integrity of the graphite components because the graphite is brittle and shows quite different behaviors from metals in high temperature environment. The American Society of Mechanical Engineers (ASME) issued the latest edition of the code for the high temperature reactors (HTR) in 2015. In this study, the ASME B and PV Code, Subsection HH, Subpart A, Graphite Materials was reviewed and the special features were remarked. Due the brittleness of graphites, the damage-tolerant design procedures different from the conventional metals were adopted based on semi-probabilistic approaches. The unique additional classification, SRC, is allotted to the graphite components and the full 3-D FEM or equivalent stress analysis method is required. In specific conditions, the oxidation and viscoelasticity analysis of material are required. The fatigue damage rule has not been established yet

  20. Design Procedure of Graphite Components by ASME HTR Codes

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Ji-Ho; Jo, Chang Keun [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    In this study, the ASME B and PV Code, Subsection HH, Subpart A, design procedure for graphite components of HTRs was reviewed and the differences from metal materials were remarked. The Korean VHTR has a prismatic core which is made of multiple graphite blocks, reflectors, and core supports. One of the design issues is the assessment of the structural integrity of the graphite components because the graphite is brittle and shows quite different behaviors from metals in high temperature environment. The American Society of Mechanical Engineers (ASME) issued the latest edition of the code for the high temperature reactors (HTR) in 2015. In this study, the ASME B and PV Code, Subsection HH, Subpart A, Graphite Materials was reviewed and the special features were remarked. Due the brittleness of graphites, the damage-tolerant design procedures different from the conventional metals were adopted based on semi-probabilistic approaches. The unique additional classification, SRC, is allotted to the graphite components and the full 3-D FEM or equivalent stress analysis method is required. In specific conditions, the oxidation and viscoelasticity analysis of material are required. The fatigue damage rule has not been established yet.

  1. A New Surgical Procedure "Dumbbell-Form Resection" for Selected Hilar Cholangiocarcinomas With Severe Jaundice: Comparison With Hemihepatectomy.

    Science.gov (United States)

    Wang, Shuguang; Tian, Feng; Zhao, Xin; Li, Dajiang; He, Yu; Li, Zhihua; Chen, Jian

    2016-01-01

    The aim of the study is to evaluate the therapeutic effect of a new surgical procedure, dumbbell-form resection (DFR), for hilar cholangiocarcinoma (HCCA) with severe jaundice. In DFR, liver segments I, IVb, and partial V above the right hepatic pedicle are resected.Hemihepatectomy is recognized as the preferred procedure; however, its application is limited in HCCAs with severe jaundice.Thirty-eight HCCA patients with severe jaundice receiving DFR and 70 receiving hemihepatectomy from January 2008 to January 2013 were included. Perioperative parameters, operation-related morbidity and mortality, and post-operative survival were analyzed.A total of 21.1% patients (8/38) in the DFR group received percutaneous transhepatic biliary drainage (PTBD), which was significantly jaundice. However, its indications should be restricted.

  2. Comparative rate and risk factors of recurrent urethral stricture during different surgical procedures

    Directory of Open Access Journals (Sweden)

    D. Yu. Pushkar

    2014-11-01

    Full Text Available Objective – to identify the major risk factors leading to worse results of surgical treatment in patients with urethral stricture.Subjects and methods. Two hundred and forty-eight patients with urethral stricture underwent different surgical interventions: internal optical urethrotomy (IOU for strictures of different portions of the urethra in 157 patients (the operation was made once in 121 patients, twice in 24 patients, and thrice or more in 12; replacement urethroplasty using a buccal mucosa graft for strictures of the anterior urethra in 46 patients; Turner-Warwick’s anastomotic urethroplasty modified by Webster for strictures (distraction defects of the posterior urethra in 45 patients. The results of surgical treatment were studied using urethrography, uroflowmetry, urethrocystoscopy, the international prostate symptom score, quality of life (QoL questionnaire, and the international index of erectile function (IIEF questionnaire. The role of risk factors for postoperative recurrent urethral stricture was assessed by univariate and multivariate analyses.Results. The rate of recurrent urethral stricture after IOU was 66.9 % (59.5, 87.5, and 100 % after the first, second, third or more subsequent operations, respectively; 12.1 % after all types of urethroplasty, 15.2 % after augmentation urethroplasty, and 8.9 % after anastomotic urethroplasty. The major risk factors of recurrent urethral stricture after IOU were recognized to be the location of urethral stricture in the penile or bulbomembranous portions, a urethral stricture length of > 1 cm, severe urethral lumen narrowing, and performance of 2 or more operations; those after augmentation urethroplasty were previous ineffective treatment, a stricture length of > 4 cm, lichen sclerosus, and smoking; those after anastomotic urethroplasty were previous ineffective treatment, smoking, and a stricture length of > 4 cm.Conclusion. The results of the investigation have shown that only

  3. Comparative rate and risk factors of recurrent urethral stricture during different surgical procedures

    Directory of Open Access Journals (Sweden)

    D. Yu. Pushkar

    2012-01-01

    Full Text Available Objective – to identify the major risk factors leading to worse results of surgical treatment in patients with urethral stricture.Subjects and methods. Two hundred and forty-eight patients with urethral stricture underwent different surgical interventions: internal optical urethrotomy (IOU for strictures of different portions of the urethra in 157 patients (the operation was made once in 121 patients, twice in 24 patients, and thrice or more in 12; replacement urethroplasty using a buccal mucosa graft for strictures of the anterior urethra in 46 patients; Turner-Warwick’s anastomotic urethroplasty modified by Webster for strictures (distraction defects of the posterior urethra in 45 patients. The results of surgical treatment were studied using urethrography, uroflowmetry, urethrocystoscopy, the international prostate symptom score, quality of life (QoL questionnaire, and the international index of erectile function (IIEF questionnaire. The role of risk factors for postoperative recurrent urethral stricture was assessed by univariate and multivariate analyses.Results. The rate of recurrent urethral stricture after IOU was 66.9 % (59.5, 87.5, and 100 % after the first, second, third or more subsequent operations, respectively; 12.1 % after all types of urethroplasty, 15.2 % after augmentation urethroplasty, and 8.9 % after anastomotic urethroplasty. The major risk factors of recurrent urethral stricture after IOU were recognized to be the location of urethral stricture in the penile or bulbomembranous portions, a urethral stricture length of > 1 cm, severe urethral lumen narrowing, and performance of 2 or more operations; those after augmentation urethroplasty were previous ineffective treatment, a stricture length of > 4 cm, lichen sclerosus, and smoking; those after anastomotic urethroplasty were previous ineffective treatment, smoking, and a stricture length of > 4 cm.Conclusion. The results of the investigation have shown that only

  4. Design and implementation of a PC-based image-guided surgical system.

    Science.gov (United States)

    Stefansic, James D; Bass, W Andrew; Hartmann, Steven L; Beasley, Ryan A; Sinha, Tuhin K; Cash, David M; Herline, Alan J; Galloway, Robert L

    2002-11-01

    In interactive, image-guided surgery, current physical space position in the operating room is displayed on various sets of medical images used for surgical navigation. We have developed a PC-based surgical guidance system (ORION) which synchronously displays surgical position on up to four image sets and updates them in real time. There are three essential components which must be developed for this system: (1) accurately tracked instruments; (2) accurate registration techniques to map physical space to image space; and (3) methods to display and update the image sets on a computer monitor. For each of these components, we have developed a set of dynamic link libraries in MS Visual C++ 6.0 supporting various hardware tools and software techniques. Surgical instruments are tracked in physical space using an active optical tracking system. Several of the different registration algorithms were developed with a library of robust math kernel functions, and the accuracy of all registration techniques was thoroughly investigated. Our display was developed using the Win32 API for windows management and tomographic visualization, a frame grabber for live video capture, and OpenGL for visualization of surface renderings. We have begun to use this current implementation of our system for several surgical procedures, including open and minimally invasive liver surgery.

  5. Design verification for large reprocessing plants (Proposed procedures)

    International Nuclear Information System (INIS)

    Rolandi, G.

    1988-07-01

    In the 1990s, four large commercial reprocessing plants will progressively come into operation: If an effective and efficient safeguards system is to be applied to these large and complex plants, several important factors have to be considered. One of these factors, addressed in the present report, concerns plant design verification. Design verification provides an overall assurance on plant measurement data. To this end design verification, although limited to the safeguards aspects of the plant, must be a systematic activity, which starts during the design phase, continues during the construction phase and is particularly performed during the various steps of the plant's commissioning phase. The detailed procedures for design information verification on commercial reprocessing plants must be defined within the frame of the general provisions set forth in INFCIRC/153 for any type of safeguards related activities and specifically for design verification. The present report is intended as a preliminary contribution on a purely technical level, and focusses on the problems within the Agency. For the purpose of the present study the most complex case was assumed: i.e. a safeguards system based on conventional materials accountancy, accompanied both by special input and output verification and by some form of near-real-time accountancy involving in-process inventory taking, based on authenticated operator's measurement data. C/S measures are also foreseen, where necessary to supplement the accountancy data. A complete ''design verification'' strategy comprehends: informing the Agency of any changes in the plant system which are defined as ''safeguards relevant''; ''reverifying by the Agency upon receiving notice from the Operator on any changes, on ''design information''. 13 refs

  6. Design procedure of capsule with multistage heater control (named MUSTAC)

    International Nuclear Information System (INIS)

    Someya, Hiroyuki; Endoh, Yasuichi; Hoshiya, Taiji; Niimi, Motoji; Harayama, Yasuo

    1990-11-01

    A capsule with electric heaters at multistage (named MUSTAC) is a type of capsule used in JMTR. The heaters are assembled in the capsule. Supply electric current to the heaters can be independently adjusted with a control systems that keeps irradiation specimens to constant temperature. The capsule being used, the irradiation specimen are inserted into specimen holders. Gas-gap size, between outer surface of specimen holders and inner surface of capsule casing, is calculated and determined to be flatten temperature of loaded specimens over the region. The rise or drop of specimen temperature in accordance with reactor power fluctuations is corrected within the target temperature of specimen by using the heaters filled into groove at specimen holder surface. The present report attempts to propose a reasonable design procedure of the capsules by means of compiling experience for designs, works and irradiation data of the capsules and to prepare for useful informations against onward capsule design. The key point of the capsule lies on thermal design. Now design thermal calculations are complicated in case of specimen holder with multihole. Resolving these issues, it is considered from new on that an emphasis have to placed on settling a thermal calculation device, for an example, a computer program on calculation specimen temperature. (author)

  7. Anaplastic carcinoma of the pancreas: Is there a role for palliative surgical procedure?

    Directory of Open Access Journals (Sweden)

    Rajan Vaithianathan

    2014-01-01

    Full Text Available Anaplastic carcinoma (AC or undifferentiated carcinoma of the pancreas is a rare variant among the malignant pancreatic neoplasms. These tumors have a poor prognosis with survival measured in months. The role of surgical palliation to improve the quality of life is not well defined in these patients. We report a case of AC of pancreas in a 65-year-old male patient. Patient had upper abdominal pain with frequent bilious vomiting. Computed tomography scan of the abdomen showed a mass in the body of pancreas with possible infiltration of duodenojejunal flexure (DJF. Laparotomy revealed an inoperable mass with posterior fixity and involvement of the DJF. Patient underwent a palliative duodenojejunostomy. Tissue biopsy from the tumor showed pleomorphic type AC with giant cells. Patient had good symptomatic relief from profuse vomiting and progressed well at follow up. AC of pancreas is a rare and aggressive malignancy with dismal outlook. If obstructive symptoms are present due to duodenal involvement, a palliative bypass may be a worthwhile surgical option in selected cases.

  8. Technique of Antireflux Procedure without Creating Submucosal Tunnel for Surgical Correction of Vesicoureteric Reflux during Bladder Closure in Exstrophy.

    Science.gov (United States)

    Sunil, Kanoujia; Gupta, Archika; Chaubey, Digamber; Pandey, Anand; Kureel, Shiv Narain; Verma, Ajay Kumar

    2018-01-01

    To report the clinical application of the new surgical technique of antireflux procedure without creating submucosal tunnel for surgical correction of vesicoureteric reflux during bladder closure in exstrophy. Based on the report of published experimental technique, the procedure was clinically executed in seven patients of classic exstrophy bladder with small bladder plate with polyps, where the creation of submucosal tunnel was not possible, in last 18 months. Ureters were mobilized. A rectangular patch of bladder mucosa at trigone was removed exposing the detrusor. Mobilized urteres were advanced, crossed and anchored to exposed detrusor parallel to each other. Reconstruction included bladder and epispadias repair with abdominal wall closure. The outcome was measured with the assessment of complications, abolition of reflux on cystogram and upper tract status. At 3-month follow-up cystogram, reflux was absent in all. Follow-up ultrasound revealed mild dilatation of pelvis and ureter in one. The technique of extra-mucosal ureteric reimplantation without the creation of submucosal tunnel is simple to execute without risk and complications and effectively provides an antireflux mechanism for the preservation of upper tract in bladder exstrophy. With the use of this technique, reflux can be prevented since the very beginning of exstrophy reconstruction.

  9. Criteria procedure development for tender in construction design

    Directory of Open Access Journals (Sweden)

    Malykha Galina Gennad’evna

    Full Text Available This article deals with the problem of criteria optimization in order to objectively evaluate the experience of an applicant (a project organization and the quality of a design product (project documentation. The methodology to be developed is based on introduction of new evaluation criteria (sub-criteria that in conjunction with the applicable criteria specified by the Law on the Contract System will allow developing the optimal procedure to evaluate competitive bids of the participants in tenders and determining the most appropriate candidate, with whom the contract will be further concluded. The article analyzes the existing criteria and their interaction with each other and describes the specifics of tenders for design in the form of open competition. The list decreases to three criteria, such as "contract price", "quality, functional and environmental characteristics of a procurement facility", "qualification of procurement participants, including availability of financial resources, equipment and other material resources necessary for the execution of the contract material resources, the presence of goodwill, professionals and other employees of a certain experience level". However, in order to upgrade the quality of assurance procedures for the design works to be performed, it was decided to apply new evaluation criteria (sub-criteria components, such as "availability of positive findings of the state out-of-departmental examination that are similar to the subject of competition, on a participant in placement of order", "availability of the certificate on approval of architectural and urban planning decisions that are similar to the subject of competition, on a participant in placement of order", "availability of the permit for the commissioning of facilities that are similar to the subject of competition, on a participant in placement of order", "availability of the contract for designer's supervision with a participant in placement of

  10. Surgical removal of a large vaginal calculus formed after a tension-free vaginal tape procedure.

    Science.gov (United States)

    Zilberlicht, Ariel; Feiner, Benjamin; Haya, Nir; Auslender, Ron; Abramov, Yoram

    2016-11-01

    Vaginal calculus is a rare disorder which has been reported in association with urethral diverticulum, urogenital sinus anomaly, bladder exstrophy and the tension-free vaginal tape (TVT) procedure. We report a 42-year-old woman who presented with persistent, intractable urinary tract infection (UTI) following a TVT procedure. Cystoscopy demonstrated an eroded tape with the formation of a bladder calculus, and the patient underwent laser cystolithotripsy and cystoscopic resection of the tape. Following this procedure, her UTI completely resolved and she remained asymptomatic for several years. Seven years later she presented with a solid vaginal mass. Pelvic examination followed by transvaginal ultrasonography and magnetic resonance imaging demonstrated a large vaginal calculus located at the lower third of the anterior vaginal wall adjacent to the bladder neck. This video presents the transvaginal excision and removal of the vaginal calculus.

  11. Successful Surgical Treatment for Elephantiasis Nostras Verrucosa Using a New Designed Column Flap.

    Science.gov (United States)

    Han, Hyun Ho; Lim, Soo Yeon; Oh, Deuk Young

    2015-09-01

    Elephantiasis nostras verrucosa is a chronic lymphedema that causes enlarged and disfigured extremities. There are plenty of treatment options. However, there is no complete treatment. Preventive or symptomatic therapy is the basis for treating elephantiasis. In this article, we report a case of elephantiasis nostras verrucosa treated successfully by surgical reconstruction using a newly designed column flap. © The Author(s) 2015.

  12. Surgical Procedures for External Auditory Canal Carcinoma and the Preservation of Postoperative Hearing

    Directory of Open Access Journals (Sweden)

    Hiroshi Hoshikawa

    2012-01-01

    Full Text Available Carcinoma of the external auditory canal (EAC is an unusual head and neck malignancy. The pathophysiology of these tumors is different from other skin lesions because of their anatomical and functional characteristics. Early-stage carcinoma of the EAC can be generally cured by surgical treatment, and reconstruction of the EAC with a tympanoplasty can help to retain hearing, thus improving the patients’ quality of life. In this study, we present two cases of early-stage carcinoma of the EAC treated by canal reconstruction using skin grafts after lateral temporal bone resection. A rolled-up skin graft with a temporal muscle flap was useful for keeping the form and maintaining the postoperative hearing. An adequate size of the skin graft and blood supply to the graft bed are important for achieving a successful operation.

  13. Are policy decisions on surgical procedures informed by robust economic evidence? A systematic review.

    Science.gov (United States)

    Ara, Roberta; Basarir, Hasan; Keetharuth, Anju D; Barbieri, Marco; Weatherly, Helen L A; Sculpher, Mark J S; Ahmed, Hashim; Brown, Steven

    2014-10-01

    The aim of this study was to examine the empirical and methodological cost-effectiveness evidence of surgical interventions for breast, colorectal, or prostate cancer. A systematic search of seven databases including MEDLINE, EMBASE, and NHSEED, research registers, the NICE Web site and conference proceedings was conducted in April 2012. Study quality was assessed in terms of meeting essential, preferred and UK NICE specific requirements for economic evaluations. The seventeen (breast = 3, colorectal = 7, prostate = 7) included studies covered a broad range of settings (nine European; eight non-European) and six were published over 10 years ago. The populations, interventions and comparators were generally well defined. Very few studies were informed by literature reviews and few used synthesized clinical evidence. Although the interventions had potential differential effects on recurrence and mortality rates, some studies used relatively short time horizons. Univariate sensitivity analyses were reported in all studies but less than a third characterized all uncertainty with a probabilistic sensitivity analysis. Although a third of studies incorporated patients' health-related quality of life data, only four studies used social tariff values. There is a dearth of recent robust evidence describing the cost-effectiveness of surgical interventions in the management of breast, colorectal and prostate cancers. Many of the recent publications did not satisfy essential methodological requirements such as using clinical evidence informed by a systematic review and synthesis. Given the ratio of potential benefit and harms associated with cancer surgery and the volume of resources consumed by these, there is an urgent need to increase economic evaluations of these technologies.

  14. Recession wedge trochleoplasty as an additional procedure in the surgical treatment of patellar instability with major trochlear dysplasia: early results.

    Science.gov (United States)

    Thaunat, M; Bessiere, C; Pujol, N; Boisrenoult, P; Beaufils, P

    2011-12-01

    The importance of a dysplastic trochlea as a component of patellar instability has long been recognized. An original trochleoplasty technique consisting in retro-trochlear recession wedge osteotomy was described by Goutallier et al. The aim is not to fashion a groove but to reduce the bump without modifying patellofemoral congruence. This retrospective study reports the operative technique and short-term outcomes of a consecutive case series of 17 patients (19 knees) who underwent recession wedge trochleoplasty for patellofemoral instability associated with severe trochlear dysplasia. Other contributing factors of patellar instability were also corrected as part of the surgical procedure: tibial tuberosity transfer (n=18), MPFL reconstruction (n=8). Minimum follow-up was 12 months (mean, 34 months; range, 12 to 71 months). The trochlear prominence was reduced from a mean 4.8mm (range, 0 to 8mm) to -0.8mm (range, -8 to 6mm). Patellar tilt was reduced from a mean 14° (range, 6° to 26°) to 6° (range, -1° to 24°). Two cases showed recurrent patellofemoral instability. Mean Kujala, KOOS and IKDC score were respectively 80 (± 17), 70 (± 18) and 67 (± 17) at last follow-up. Three patients required further operations, apart from removal of metal screws: arthroscopic arthrolysis for stiffness (n=1), revision for tibial tuberosity non-union (n=1), and supratrochlear exostosectomy (n=1). Recession wedge trochleoplasty is a feasible additional procedure addressing bony trochlear abnormality in the surgical treatment of patellar instability. Our attitude is to perform it never in isolation but associated to realignment of the extensor apparatus according to the à la carte surgery concept. It seems to be effective in preventing future patellar dislocation and reducing anterior knee pain in case of painful patellofemoral instability with a major dysplastic trochlea, or in revision cases when other realignment procedures have failed. Copyright © 2011 Elsevier Masson SAS

  15. Use of Antibiotic Prophylaxis for Tooth Extractions, Dental Implants, and Periodontal Surgical Procedures.

    Science.gov (United States)

    Suda, Katie J; Henschel, Heather; Patel, Ursula; Fitzpatrick, Margaret A; Evans, Charlesnika T

    2018-01-01

    Guidelines for antibiotics prior to dental procedures for patients with specific cardiac conditions and prosthetic joints have changed, reducing indications for antibiotic prophylaxis. In addition to guidelines focused on patient comorbidities, systematic reviews specific to dental extractions and implants support preprocedure antibiotics for all patients. However, data on dentist adherence to these recommendations are scarce. This was a cross-sectional study of veterans undergoing tooth extractions, dental implants, and periodontal procedures. Patients receiving antibiotics for oral or nonoral infections were excluded. Data were collected through manual review of the health record. Of 183 veterans (mean age, 62 years; 94.5% male) undergoing the included procedures, 82.5% received antibiotic prophylaxis (mean duration, 7.1 ± 1.6 days). Amoxicillin (71.3% of antibiotics) and clindamycin (23.8%) were prescribed most frequently; 44.7% of patients prescribed clindamycin were not labeled as penicillin allergic. Of those who received prophylaxis, 92.1% received postprocedure antibiotics only, 2.6% received preprocedural antibiotics only, and 5.3% received pre- and postprocedure antibiotics. When prophylaxis was indicated, 87.3% of patients received an antibiotic. However, 84.9% received postprocedure antibiotics when preprocedure administration was indicated. While the majority of antibiotics were indicated, only 8.2% of patients received antibiotics appropriately. The primary reason was secondary to prolonged duration. Three months postprocedure, there were no occurrences of Clostridium difficile infection, infective endocarditis, prosthetic joint infections, or postprocedure oral infections. The majority of patients undergoing a dental procedure received antibiotic prophylaxis as indicated. Although patients for whom antibiotic prophylaxis was indicated should have received a single preprocedure dose, most antibiotics were prescribed postprocedure. Dental stewardship

  16. Diagnosing Snapping Sartorius Tendon Secondary to a Meniscal Cyst Using Dynamic Ultrasound Avoids Incorrect Surgical Procedure

    Directory of Open Access Journals (Sweden)

    Vipin Asopa

    2013-01-01

    Full Text Available We describe a case of painful snapping in the medial aspect of the knee of a 40-year-old man, following a knee hyperflexion injury. Dynamic real-time ultrasonography determined that the snapping was due to the distal tendon of sartorius passing over a medial meniscal cyst. The patient subsequently underwent arthroscopic decompression of the cyst instead of an inappropriate hamstring tendon harvest procedure, with complete resolution of symptoms.

  17. New procedures of ergonomics design in a large oil company.

    Science.gov (United States)

    Alhadeff, Cynthia Mossé; Silva, Rosana Fernandes da; Reis, Márcia Sales dos

    2012-01-01

    This study presents the challenge involved in the negotiation and construction of a standard process in a major petroleum company that has the purpose of guiding the implementation of ergonomic studies in the development of projects, systemising the implementation of ergonomics design. The standard was created by a multi-disciplinary working group consisting of specialists in ergonomics, who work in a number of different areas of the company. The objective was to guide "how to" undertake ergonomics in all projects, taking into consideration the development of the ergonomic appraisals of work. It also established that all the process, in each project phase, should be accompanied by a specialist in ergonomics. This process as an innovation in the conception of projects in this company, signals a change of culture, and, for this reason requires broad dissemination throughout the several company leadership levels, and training of professionals in projects of ergonomics design. An implementation plan was also prepared and approved by the corporate governance, complementing the proposed challenge. In this way, this major oil company will implement new procedures of ergonomics design to promote health, safety, and wellbeing of the workforce, besides improving the performance and reliability of its systems and processes.

  18. One-Stage Gender-Confirmation Surgery as a Viable Surgical Procedure for Female-to-Male Transsexuals.

    Science.gov (United States)

    Stojanovic, Borko; Bizic, Marta; Bencic, Marko; Kojovic, Vladimir; Majstorovic, Marko; Jeftovic, Milos; Stanojevic, Dusan; Djordjevic, Miroslav L

    2017-05-01

    Female-to-male gender-confirmation surgery (GCS) includes removal of breasts and female genitalia and complete genital and urethral reconstruction. With a multidisciplinary approach, these procedures can be performed in one stage, avoiding multistage operations. To present our results of one-stage sex-reassignment surgery in female-to-male transsexuals and to emphasize the advantages of single-stage over multistage surgery. During a period of 9 years (2007-2016), 473 patients (mean age = 31.5 years) underwent metoidioplasty. Of these, 137 (29%) underwent simultaneous hysterectomy, and 79 (16.7%) underwent one-stage GCS consisting of chest masculinization, total transvaginal hysterectomy with bilateral adnexectomy, vaginectomy, metoidioplasty, urethral lengthening, scrotoplasty, and implantation of bilateral testicular prostheses. All surgeries were performed simultaneously by teams of experienced gynecologic and gender surgeons. Primary outcome measurements were surgical time, length of hospital stay, and complication and reoperation rates compared with other published data and in relation to the number of stages needed to complete GCS. Mean follow-up was 44 months (range = 10-92). Mean surgery time was 270 minutes (range = 215-325). Postoperative hospital stay was 3 to 6 days (mean = 4). Complications occurred in 20 patients (25.3%). Six patients (7.6%) had complications related to mastectomy, and one patient underwent revision surgery because of a breast hematoma. Two patients underwent conversion of transvaginal hysterectomy to an abdominal approach, and subcutaneous perineal cyst, as a consequence of colpocleisis, occurred in nine patients. There were eight complications (10%) from urethroplasty, including four fistulas, three strictures, and one diverticulum. Testicular implant rejection occurred in two patients and testicular implant displacement occurred in one patient. Female-to-male transsexuals can undergo complete GCS, including mastectomy

  19. Simultaneous bilateral total knee and ankle arthroplasty as a single surgical procedure.

    Science.gov (United States)

    Pagenstert, Geert; Hintermann, Beat

    2011-10-13

    Simultaneous osteoarthritis (OA) of the ankle joint complicates primary total knee arthroplasty (TKA). In such cases, rehabilitation of TKA is limited by debilitating ankle pain, but varus or valgus ankle arthritis may even compromise placement of knee prosthetic components. We present a patient with simultaneous bilateral valgus and patellofemoral OA of the knees and bilateral varus OA of the ankle joints that equally contributed to overall disability. This 63 years old, motivated and otherwise healthy patient was treated by simultaneous bilateral total knee and ankle arthroplasty (quadruple total joint arthroplasty, TJA) during the same anesthesia. Two years outcome showed excellent alignment and function of all four replaced joints. Postoperative time for rehabilitation, back to work (6th week) and hospital stay (12 days) of this special patient was markedly reduced compared to the usual course of separate TJA. Simultaneous quadruple TJA in equally disabling OA of bilateral deformed knees and ankles resulted in a better functional outcome and faster recovery compared to the average reported results after TKA and TAA in literature. However, careful preoperative planning, extensive patient education, and two complete surgical teams were considered essential for successful performance. To the best of our knowledge this is the first case report in literature about quadruple major total joint arthroplasty implanted during the same anesthesia in the same patient.

  20. Unusual case of stroke related to Kocuria Kristinae endocarditis treated with surgical procedure.

    Science.gov (United States)

    Aleksic, D; Miletic-Drakulic, S; Boskovic-Matic, T; Simovic, S; Toncev, G

    2016-01-01

    We report the case of a 35-year-old man with stroke related to infective endocarditis (IE) caused by Kocuria kristinae . The patient with chronic hepatitis C virus infection and a former intravenous drug user developed a stroke suddenly, after three months duration of fever and malaise. Duplex ultrasonography of the carotid arteries (zero level diastolic flow, diastolic reversed flow) focused attention to cardiac valve pathology and endocarditis (definite confirmation was made by transesophageal echocardiography). Kocuria kristinae was grown from the blood culture and antibiotic therapy administered, according to the antibiogram, did not cure the infection and the patient underwent an aortic valve replacement with a mechanical prosthesis and debridement of the mitral valve. One year after the surgery, the patient had no subjective problems and neurological findings were normal.  Conclusion: To our knowledge, this is the first case of IE caused by Kocuria kristinae , which was diagnosed after the development of stroke, where IE was suspected based on Duplex ultrasonography of the carotid arteries.  This is the second case of infection by this bacterium which could not be cured by antibiotics only and had to be submitted to surgical intervention. Hippokratia 2016, 20(3): 231-234.

  1. Simultaneous bilateral total knee and ankle arthroplasty as a single surgical procedure

    Directory of Open Access Journals (Sweden)

    Hintermann Beat

    2011-10-01

    Full Text Available Abstract Background Simultaneous osteoarthritis (OA of the ankle joint complicates primary total knee arthroplasty (TKA. In such cases, rehabilitation of TKA is limited by debilitating ankle pain, but varus or valgus ankle arthritis may even compromise placement of knee prosthetic components. Case presentation We present a patient with simultaneous bilateral valgus and patellofemoral OA of the knees and bilateral varus OA of the ankle joints that equally contributed to overall disability. This 63 years old, motivated and otherwise healthy patient was treated by simultaneous bilateral total knee and ankle arthroplasty (quadruple total joint arthroplasty, TJA during the same anesthesia. Two years outcome showed excellent alignment and function of all four replaced joints. Postoperative time for rehabilitation, back to work (6th week and hospital stay (12 days of this special patient was markedly reduced compared to the usual course of separate TJA. Conclusions Simultaneous quadruple TJA in equally disabling OA of bilateral deformed knees and ankles resulted in a better functional outcome and faster recovery compared to the average reported results after TKA and TAA in literature. However, careful preoperative planning, extensive patient education, and two complete surgical teams were considered essential for successful performance. To the best of our knowledge this is the first case report in literature about quadruple major total joint arthroplasty implanted during the same anesthesia in the same patient.

  2. Differentiation of specific ripple patterns helps to identify epileptogenic areas for surgical procedures.

    Science.gov (United States)

    Kerber, Karolin; Dümpelmann, Matthias; Schelter, Björn; Le Van, Pierre; Korinthenberg, Rudolf; Schulze-Bonhage, Andreas; Jacobs, Julia

    2014-07-01

    High frequency oscillations (HFOs) at 80-500 Hz are promising markers of epileptic areas. Several retrospective studies reported that surgical removal of areas generating HFOs was associated with a good seizure outcome. Recent reports suggested that ripple (80-200 Hz) HFO patterns co-existed with different background EEG activities. We hypothesized that the coexisting background EEG pattern may distinguish physiological from epileptic ripples. Rates of HFOs were analyzed in intracranial EEG recordings of 22 patients. Additionally, ripple patterns were classified for each channel depending either as coexisting with a flat or oscillatory background activity. A multi-variate analysis was performed to determine whether removal of areas showing the above EEG markers correlated with seizure outcome. Removal of areas generating high rates of 'fast ripples (>200 Hz)' and 'ripples on a flat background activity' showed a significant correlation with a seizure-free outcome. In contrast, removal of high rates of 'ripples' or 'ripple patterns in a continuously oscillating background' was not significantly associated with seizure outcome. Ripples occurring in an oscillatory background activity may be suggestive of physiological activity, while those on a flat background reflect epileptic activity. Consideration of coexisting background patterns may improve the delineation of the epileptogenic areas using ripple oscillations. Copyright © 2013 International Federation of Clinical Neurophysiology. Published by Elsevier Ireland Ltd. All rights reserved.

  3. The stratification of cardiac surgical procedures according to use of blood products: a retrospective analysis of 1480 cases.

    Science.gov (United States)

    Hardy, J F; Perrault, J; Tremblay, N; Robitaille, D; Blain, R; Carrier, M

    1991-05-01

    The use of blood products in 1480 consecutive cases of adult cardiac surgical procedures over a period of 15 mth was studied retrospectively using the database of the Department of Anaesthesia of the Institut de Cardiologie de Montréal. Use of blood products was compared in patients having (1) coronary artery bypass grafting, (2) valvular surgery, (3) or a combination of 1 and 2. First operations were compared with reoperations. Overall, the use of homologous blood products was greatest in patients of Group 3, intermediate in patients of Group 2, and smallest in patients of Group 1. Reoperations were associated with an increase in intraoperative transfusion of packed red blood cells, but postoperative chest drainage was similar to first operations. When all blood products (packed red blood cells, fresh frozen plasma and platelets) were taken into consideration, patients undergoing primary CABG or valve surgery were the least exposed to homologous blood donors (five and six units transfused respectively). Repeat CABG was associated with an intermediate exposure to homologous blood products (eight units). Finally, primary and repeat combined procedures, and repeat valve surgery were associated with the greatest exposure to foreign blood products (10, 13 and 10 units respectively). The data presented in this study provide a rational basis for stratification of procedures according to the expected use of blood products, particularly in view of future studies which may be planned to examine the efficiency of blood conservation strategies.

  4. Mandibular marginal contouring in oriental aesthetic surgery: refined surgical concept and operative procedure.

    Science.gov (United States)

    Satoh, Kaneshige; Mitsukawa, Nobuyuki

    2014-05-01

    In aesthetic mandibular contouring surgery, which is often conducted in Asians, the operative procedure is thought to deliver a more aesthetic mandibular shape by means of contouring conducted as a whole from the ramus to the symphysis. The authors describe the refined concept and operative procedures of mandibular marginal contouring. For the 7-year period from 2004 to 2011, mandibular marginal contouring has been used in 57 consecutive series of Japanese subjects. Patient ages ranged from 18 to 33 years, and the subjects included 15 men and 42 women. The surgery was carried out by cutting off the protruding deformed mandibular margin from the ramus to the symphysis. In 53 of 57 cases, the focus was on angle contouring. Concomitant genioplasty by horizontal osteotomy of the chin was conducted in 42 of 57 cases (recession, advancement, shortening, elongation, and correction of the shift variously). In 22 materials exhibiting bulk around the mandibular, the ramus to the body was excised sagittally and thinned. In all the patients, mandibular marginal contouring from the ramus to the symphysis was completed. Partial masseter muscle resection was conducted in 11 of 57 cases. Mandibular contouring effectively achieved a highly satisfactory result in all cases. The upper portion of the peripheral branch of the trunk of the mental nerve was dissected by an electric scalpel in 1 case but sutured immediately using an 8-0 nylon stitch. Transient palsy of the mental nerve was noticed in a few cases but subsided in 1 to 2 months. No particular complications were encountered. No secondary revision was required in this series. In mandibular angle plasty, mandibular marginal contouring from the ramus to the symphysis should be carried out by cutting off the angle keeping in mind the entire mandibular shape. This concept and the procedure can deliver greater patient satisfaction.

  5. Reliability of computer designed surgical guides in six implant rehabilitations with two years follow-up.

    Science.gov (United States)

    Giordano, Mauro; Ausiello, Pietro; Martorelli, Massimo; Sorrentino, Roberto

    2012-09-01

    To evaluate the reliability and accuracy of computer-designed surgical guides in osseointegrated oral implant rehabilitation. Six implant rehabilitations, with a total of 17 implants, were completed with computer-designed surgical guides, performed with the master model developed by muco-compressive and muco-static impressions. In the first case, the surgical guide had exclusively mucosal support, in the second case exclusively dental support. For all six cases computer-aided surgical planning was performed by virtual analyses with 3D models obtained by dental scan DICOM data. The accuracy and stability of implant osseointegration over two years post surgery was then evaluated with clinical and radiographic examinations. Radiographic examination, performed with digital acquisitions (RVG - Radio Video graph) and parallel techniques, allowed two-dimensional feedback with a margin of linear error of 10%. Implant osseointegration was recorded for all the examined rehabilitations. During the clinical and radiographic post-surgical assessments, over the following two years, the peri-implant bone level was found to be stable and without appearance of any complications. The margin of error recorded between pre-operative positions assigned by virtual analysis and the post-surgical digital radiographic observations was as low as 0.2mm. Computer-guided implant surgery can be very effective in oral rehabilitations, providing an opportunity for the surgeon: (a) to avoid the necessity of muco-periosteal detachments and then (b) to perform minimally invasive interventions, whenever appropriate, with a flapless approach. Copyright © 2012 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

  6. Computer-aided design and computer-aided modeling (CAD/CAM) generated surgical splints, cutting guides and custom-made implants: Which indications in orthognathic surgery?

    Science.gov (United States)

    Scolozzi, P

    2015-12-01

    The purpose of the present report was to describe our indications, results and complications of computer-aided design and computer-aided modeling CAD/CAM surgical splints, cutting guides and custom-made implants in orthognathic surgery. We analyzed the clinical and radiological data of ten consecutive patients with dentofacial deformities treated using a CAD/CAM technique. Four patients had surgical splints and cutting guides for correction of maxillomandibular asymmetries, three had surgical cutting guides and customized internal distractors for correction of severe maxillary deficiencies and three had custom-made implants for additional chin contouring and/or mandibular defects following bimaxillary osteotomies and sliding genioplasty. We recorded age, gender, dentofacial deformity, surgical procedure and intra- and postoperative complications. All of the patients had stable cosmetic results with a high rate of patient satisfaction at the 1-year follow-up examination. No intra- and/or postoperative complications were encountered during any of the different steps of the procedure. This study demonstrated that the application of CAD/CAM patient-specific surgical splints, cutting guides and custom-made implants in orthognathic surgery allows for a successful outcome in the ten patients presented in this series. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

  7. Timeliness and use of antibiotic prophylaxis in selected inpatient surgical procedures. The Antibiotic Prophylaxis Study Group.

    Science.gov (United States)

    Silver, A; Eichorn, A; Kral, J; Pickett, G; Barie, P; Pryor, V; Dearie, M B

    1996-06-01

    Twenty-five percent of all nosocomial infections are wound infections. Professional guidelines support the timely use of preoperative prophylaxis for prevention of postoperative wound infections. Barriers exist in implementing this practice. IPRO, the New York State peer review organization, as part of the Health Care Financing Administration's Health Care Quality Improvement Program, sought to determine the proportion of patients receiving timely antibiotic prophylaxis for aortic grafts, hip replacements and colon resections in 44 hospitals in New York State. IPRO conducted a retrospective medical record review of 44 hospitals through out New York State stratified for teaching, nonteaching status. A sample was drawn of 2651 patients, 2256 from Medicare and 395 from Medicaid, undergoing either abdominal aortic aneurysm repair, partial or total hip replacement or large bowel resection. The study determined the proportion of patients who had documentation of receiving antibiotics and those who received antibiotics timely, that is less than or equal to 2 hours preoperatively. Eighty-six percent of patients had documentation of receiving an antibiotic. Forty-six percent of aneurysm repairs and 60% of hip replacements had evidence of receiving timely antibiotic prophylaxis, that is within 2 hours prior to surgery. For colon resections, 73% of cases had either oral prophylaxis or timely parenteral therapy. An increased proportion of patients had received parenteral antibiotics prematurely as the surgical start time occurred later in the day. A total of 44 different antibiotics were recorded for prophylaxis. Antibiotic prophylaxis was performed in 81% to 94% of cases, however, anywhere from 27% to 54% of all cases did not receive antibiotics in a timely fashion. By delegating implementation of ordered antibiotic prophylaxis to the anesthesia team, timing may be improved and the incidence of postoperative wound infections may decrease.

  8. What is the optimal minimally invasive surgical procedure for endometrial cancer staging in the obese and morbidly obese woman?

    Science.gov (United States)

    Gehrig, Paola A; Cantrell, Leigh A; Shafer, Aaron; Abaid, Lisa N; Mendivil, Alberto; Boggess, John F

    2008-10-01

    Thirty-three percent of U.S. women are either obese or morbidly obese. This is associated with an increased risk of death from all causes and is also associated with an increased risk of endometrial carcinoma. We sought to compare minimally invasive surgical techniques for staging the obese and morbidly obese woman with endometrial cancer. Consecutive robotic endometrial cancer staging procedures were collected from 2005-2007 and were compared to consecutive laparoscopic cases (2000-2004). Demographics including age, weight, body mass index (BMI), operative time, estimated blood loss, lymph node retrieval, hospital stay and complications were collected and compared. During the study period, there were 36 obese and 13 morbidly obese women who underwent surgery with the DaVinci robotic system and 25 obese and 7 morbidly obese women who underwent traditional laparoscopy. For both the obese and morbidly obese patient, robotic surgery was associated with shorter operative time (p=0.0004), less blood loss (ptool for the comprehensive surgical staging of the obese and morbidly obese woman with endometrial cancer. As this patient population is at increased risk of death from all causes, including post-operative complications, all efforts should be made to improve their outcomes and minimally invasive surgery provides a useful platform by which this can occur.

  9. Application of a real-time three-dimensional navigation system to various oral and maxillofacial surgical procedures.

    Science.gov (United States)

    Ohba, Seigo; Yoshimura, Hitoshi; Ishimaru, Kyoko; Awara, Kousuke; Sano, Kazuo

    2015-09-01

    The aim of this study was to confirm the effectiveness of a real-time three-dimensional navigation system for use during various oral and maxillofacial surgeries. Five surgeries were performed with this real-time three-dimensional navigation system. For mandibular surgery, patients wore acrylic surgical splints when they underwent computed tomography examinations and the operation to maintain the mandibular position. The incidence of complications during and after surgery was assessed. No connection with the nasal cavity or maxillary sinus was observed at the maxilla during the operation. The inferior alveolar nerve was not injured directly, and any paresthesia around the lower lip and mental region had disappeared within several days after the surgery. In both maxillary and mandibular cases, there was no abnormal hemorrhage during or after the operation. Real-time three-dimensional computer-navigated surgery allows minimally invasive, safe procedures to be performed with precision. It results in minimal complications and early recovery.

  10. ProSeal laryngeal mask airway: An alternative to endotracheal intubation in paediatric patients for short duration surgical procedures

    Directory of Open Access Journals (Sweden)

    Jaya Lalwani

    2010-01-01

    Full Text Available The laryngeal mask airway (LMA is a supraglottic airway management device. The LMA is preferred for airway management in paediatric patients for short duration surgical procedures. The recently introduced ProSeal (PLMA, a modification of Classic LMA, has a gastric drainage tube placed lateral to main airway tube which allows the regurgitated gastric contents to bypass the glottis and prevents the pulmonary aspiration. This study was done to compare the efficacy of ProSeal LMA with an endotracheal tube in paediatric patients with respect to number of attempts for placement of devices, haemodynamic responses and perioperative respiratory complications. Sixty children, ASA I and II, weighing 10-20 kg between 2 and 8 years of age group of either sex undergoing elective ophthalmological and lower abdominal surgeries of 30-60 min duration, randomly divided into two groups of 30 patients each were studied. The number of attempts for endotracheal intubation was less than the placement of PLMA. Haemodynamic responses were significantly higher (P<0.05 after endotracheal intubation as compared to the placement of PLMA. There were no significant differences in mean SpO 2 (% and EtCO 2 levels recorded at different time intervals between the two groups. The incidence of post-operative respiratory complications cough and bronchospasm was higher after extubation than after removal of PLMA. The incidence of soft tissue trauma was noted to be higher for PLMA after its removal. There were no incidences of aspiration and hoarseness/sore throat in either group. It is concluded that ProSeal LMA can be safely considered as a suitable and effective alternative to endotracheal intubation in paediatric patients for short duration surgical procedures.

  11. Design procedures of hybrid PV/SMES system

    International Nuclear Information System (INIS)

    Hamad, Ismail; El-Sayas, M. A.

    2006-01-01

    This paper presents accurate procedures to determine the design parameters of an autonomous hybrid PV/SMES system. Integrating Superconductive magnetic energy storage as a recent storage technology with photovoltaic power system enhances the PV output utilization during the solar radiation fluctuations period. this is because of SMES fast response to any PV output fluctuation. The load demand is supplied either from PV plant or through SMES or from both. Imposed to the technical and economical constrains, the optimum solar cells area and the proper capacity and rating of SMES system are assessed. Regarding solar radiation profile, clear and cloudy days are accurately considered for investigation. Three indices are suggested to express the cloudy and fluctuations conditions. These indices represent the non-utilized PV energy due to clouds (x), fluctuation period (T f ) and location of fluctuations period(t s t). The incremental changes in the design parameters are computed for any variation in these indices. Differentiation between the role of BS and SMES in affecting the results is determined and quantitatively analyzed. The results of clear day condition with SMES are the bas quantities for these changes. Complete analysis of the most effective parameters is presented. Eventually, mathematical models are deduced for each parameter which assists in predicting its behavior against the independent variable.(Author)

  12. Discharges with surgical procedures performed less often than once per month per hospital account for two-thirds of hospital costs of inpatient surgery.

    Science.gov (United States)

    O'Neill, Liam; Dexter, Franklin; Park, Sae-Hwan; Epstein, Richard H

    2017-09-01

    Most surgical discharges (54%) at the average hospital are for procedures performed no more often than once per month at that hospital. We hypothesized that such uncommon procedures would be associated with an even greater percentage of the total cost of performing all surgical procedures at that hospital. Observational study. State of Texas hospital discharge abstract data: 4th quarter of 2015 and 1st quarter of 2016. Inpatients discharged with a major therapeutic ("operative") procedure. For each of N=343 hospitals, counts of discharges, sums of lengths of stay (LOS), sums of diagnosis related group (DRG) case-mix weights, and sums of charges were obtained for each procedure or combination of procedures, classified by International Classification of Diseases version 10 Procedure Coding System (ICD-10-PCS). Each discharge was classified into 2 categories, uncommon versus not, defined as a procedure performed at most once per month versus those performed more often than once per month. Major procedures performed at most once per month per hospital accounted for an average among hospitals of 68% of the total inpatient costs associated with all major therapeutic procedures. On average, the percentage of total costs associated with uncommon procedures was 26% greater than expected based on their share of total discharges (Pcosts among surgical patients can be attributed to procedures performed at most once per month per hospital. The finding that such uncommon procedures account for a large percentage of costs is important because methods of cost accounting by procedure are generally unsuitable for them. Copyright © 2017 Elsevier Inc. All rights reserved.

  13. Design for Collaboration in Health Care: Experiences from Highly Specialized Surgical Care in Sweden

    DEFF Research Database (Denmark)

    Bødker, Susanne; Schroll, Jeremiah; Groth, Kristina

    Medical Information Systems often need to be custom designed to fit the organization where they will be implemented. Participatory Design (PD) is a well known method for eliciting the user input that is necessary during this process. Recently it has been suggested that PD as it is often practiced...... will better meet these evolving needs. In this paper we present a case study of design as it is practiced at a gastro-surgical department at a University hospital in Sweden. The experiences of the department are used as a framework for discussing this issue and its implications for the CSCW/HCI community....

  14. Hilar anatomy of the hepatic artery and surgical procedure for hilar cholangiocarcinoma

    International Nuclear Information System (INIS)

    Uesaka, Katsuhiko; Maeda, Atsuyuki; Kanamoto, Hideyuki; Matsunaga, Kazuya; Yuasa, Ichiro; Okamura, Yukiyasu; Yamaguchi, Shigeki; Bando, Etsuro; Furukawa, Hiroyoshi

    2006-01-01

    This paper describes the examination of findings by multi-detector-row CT (MDCT) and by surgery to obtain the anatomy of hilar arteries and portal vein, which is necessary for the procedure in the title. Subjects are those findings of 38 patients with hilar cholangiocarcinoma, who underwent its excision during the period of 1 year from 2002 Nov. Before operation, MDCT with 16-row detector was done 20-120 sec after infusion of a non-ionized contrast medium to compose the 3D images. The left hepatic arterial system was found to be classifiable in 3 types of common, anti-clockwise and clockwise one with the respective frequency of 63, 24 and 11%, and the right system, infra-portal (76%) and supra-portal (24%) types. It was concluded that to the arterial clockwise and supra-portal types, particular attention should be paid for the cancer invasion there and for avoidance of the artery damage during the operation. (T.I.)

  15. Variation in markup of general surgical procedures by hospital market concentration.

    Science.gov (United States)

    Cerullo, Marcelo; Chen, Sophia Y; Dillhoff, Mary; Schmidt, Carl R; Canner, Joseph K; Pawlik, Timothy M

    2018-04-01

    Increasing hospital market concentration (with concomitantly decreasing hospital market competition) may be associated with rising hospital prices. Hospital markup - the relative increase in price over costs - has been associated with greater hospital market concentration. Patients undergoing a cardiothoracic or gastrointestinal procedure in the 2008-2011 Nationwide Inpatient Sample (NIS) were identified and linked to Hospital Market Structure Files. The association between market concentration, hospital markup and hospital for-profit status was assessed using mixed-effects log-linear models. A weighted total of 1,181,936 patients were identified. In highly concentrated markets, private for-profit status was associated with an 80.8% higher markup compared to public/private not-for-profit status (95%CI: +69.5% - +96.9%; p markup compared to public/private not-for-profit status in unconcentrated markets (95%CI: +45.4% - +81.1%; p markup. Government and private not-for-profit hospitals employed lower markups in more concentrated markets, whereas private for-profit hospitals employed higher markups in more concentrated markets. Copyright © 2017 Elsevier Inc. All rights reserved.

  16. Different effects of bariatric surgical procedures on dyslipidemia: a registry-based analysis.

    Science.gov (United States)

    Spivak, Hadar; Sakran, Nasser; Dicker, Dror; Rubin, Moshe; Raz, Itamar; Shohat, Tamy; Blumenfeld, Orit

    2017-07-01

    The scale and variables linked to bariatric surgery's effect on dyslipidemia have not been conclusive. To compare the effect of Roux-en-Y gastric bypass (RYGB), sleeve gastrectomy (SG), and adjustable gastric banding (LAGB) on dyslipidemia SETTING: National bariatric surgery registry. Plasma lipids and associated variables were compared at baseline and 1 year (12±4 mo) after surgery for registry patients with dyslipidemia enrolled from June 2013 to August 2014. The greatest mean total-cholesterol (TC) reduction was observed post-RYGB, 226.7±26.4 to 181.3±30.9 mg/dL (19.9%, n = 208), followed by post-SG, 227.9±24.4 to 206.7±34.2 mg/dL (8.9%, n = 1515; Pdyslipidemia, independent of weight loss. Overall, the RYGB achieved the biggest reduction in plasma lipids (TC and LDL), although SG did affect HDL. Our results could aid in the decision-making process regarding the most appropriate procedure for patients with dyslipidemia. Copyright © 2017 American Society for Bariatric Surgery. Published by Elsevier Inc. All rights reserved.

  17. Three-dimensional reconstructed computed tomography-magnetic resonance fusion image-based preoperative planning for surgical procedures for spinal lipoma or tethered spinal cord after myelomeningocele repair. Technical note

    International Nuclear Information System (INIS)

    Bamba, Yohei; Nonaka, Masahiro; Nakajima, Shin; Yamasaki, Mami

    2011-01-01

    Surgical procedures for spinal lipoma or tethered spinal cord after myelomeningocele (MMC) repair are often difficult and complicated, because the anatomical structures can be deformed in complex and unpredictable ways. Imaging helps the surgeon understand the patient's spinal anatomy. Whereas two-dimensional images provide only limited information for surgical planning, three-dimensional (3D) reconstructed computed tomography (CT)-magnetic resonance (MR) fusion images produce clearer representations of the spinal regions. Here we describe simple and quick methods for obtaining 3D reconstructed CT-MR fusion images for preoperative planning of surgical procedures using the iPlan cranial (BrainLAB AG, Feldkirchen, Germany) neuronavigation software. 3D CT images of the vertebral bone were combined with heavily T 2 -weighted MR images of the spinal cord, lipoma, cerebrospinal fluid (CSF) space, and nerve root through a process of fusion, segmentation, and reconstruction of the 3D images. We also used our procedure called 'Image Overlay' to directly project the 3D reconstructed image onto the body surface using an light emitting diode (LED) projector. The final reconstructed 3D images took 10-30 minutes to obtain, and provided the surgeon with a representation of the individual pathological structures, so enabled the design of effective surgical plans, even in patients with bony deformity such as scoliosis. None of the 19 patients treated based on our 3D reconstruction method has had neurological complications, except for CSF leakage. This 3D reconstructed imaging method, combined with Image Overlay, improves the visual understanding of complicated surgical situations, and should improve surgical efficiency and outcome. (author)

  18. Evaluation of vertical profiles to design continuous descent approach procedure

    Science.gov (United States)

    Pradeep, Priyank

    The current research focuses on predictability, variability and operational feasibility aspect of Continuous Descent Approach (CDA), which is among the key concepts of the Next Generation Air Transportation System (NextGen). The idle-thrust CDA is a fuel economical, noise and emission abatement procedure, but requires increased separation to accommodate for variability and uncertainties in vertical and speed profiles of arriving aircraft. Although a considerable amount of researches have been devoted to the estimation of potential benefits of the CDA, only few have attempted to explain the predictability, variability and operational feasibility aspect of CDA. The analytical equations derived using flight dynamics and Base of Aircraft and Data (BADA) Total Energy Model (TEM) in this research gives insight into dependency of vertical profile of CDA on various factors like wind speed and gradient, weight, aircraft type and configuration, thrust settings, atmospheric factors (deviation from ISA (DISA), pressure and density of the air) and descent speed profile. Application of the derived equations to idle-thrust CDA gives an insight into sensitivity of its vertical profile to multiple factors. This suggests fixed geometric flight path angle (FPA) CDA has higher degree of predictability and lesser variability at the cost of non-idle and low thrust engine settings. However, with optimized design this impact can be overall minimized. The CDA simulations were performed using Future ATM Concept Evaluation Tool (FACET) based on radar-track and aircraft type data (BADA) of the real air-traffic to some of the busiest airports in the USA (ATL, SFO and New York Metroplex (JFK, EWR and LGA)). The statistical analysis of the vertical profiles of CDA shows 1) mean geometric FPAs derived from various simulated vertical profiles are consistently shallower than 3° glideslope angle and 2) high level of variability in vertical profiles of idle-thrust CDA even in absence of

  19. Innovative procedure for computer-assisted genioplasty: three-dimensional cephalometry, rapid-prototyping model and surgical splint.

    Science.gov (United States)

    Olszewski, R; Tranduy, K; Reychler, H

    2010-07-01

    The authors present a new procedure of computer-assisted genioplasty. They determined the anterior, posterior and inferior limits of the chin in relation to the skull and face with the newly developed and validated three-dimensional cephalometric planar analysis (ACRO 3D). Virtual planning of the osteotomy lines was carried out with Mimics (Materialize) software. The authors built a three-dimensional rapid-prototyping multi-position model of the chin area from a medical low-dose CT scan. The transfer of virtual information to the operating room consisted of two elements. First, the titanium plates on the 3D RP model were pre-bent. Second, a surgical guide for the transfer of the osteotomy lines and the positions of the screws to the operating room was manufactured. The authors present the first case of the use of this model on a patient. The postoperative results are promising, and the technique is fast and easy-to-use. More patients are needed for a definitive clinical validation of this procedure. Copyright 2010 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  20. Chronic intravascular coagulation associated with chronic myelocytic leukemia. Use of heparin in connection with a surgical procedure.

    Science.gov (United States)

    German, H J; Smith, J A; Lindenbaum, J

    1976-10-01

    A women with Philadelphia chromosome-positive chronic myelocytic leukemia lived nearly 12 years from the time of diagnosis. During most of this period she received no therapy, and marked cyclic oscillations in the white blood cell count were documented. The last two years of her illness were marked by a hemorrhagic disorder associated with hypofibrinogenemia, thrombocytopenia, increased plasma fibrinopeptide A concentration and markedly elevated serum levels of fibrin degradation products. The coagulation disorder was rapidly reversible on several occasions with heparin therapy. After treatment with heparin and platelet transfusions, the patient underwent successful resection of a large ovarian cyst with excellent hemostasis during the procedure. Postoperatively, the administration of heparin and platelets was discontinued and a large wound hematoma developed. After resumption of therapy with heparin and platelets, the remainder of her postoperative course was uneventful. The literature on the subject is reviewed and tentative guidelines are offered concerning the management of patients with intravascular coagulation who require diagnostic or therapeutic surgical procedures.

  1. Improving the Prediction of Total Surgical Procedure Time Using Linear Regression Modeling.

    Science.gov (United States)

    Edelman, Eric R; van Kuijk, Sander M J; Hamaekers, Ankie E W; de Korte, Marcel J M; van Merode, Godefridus G; Buhre, Wolfgang F F A

    2017-01-01

    For efficient utilization of operating rooms (ORs), accurate schedules of assigned block time and sequences of patient cases need to be made. The quality of these planning tools is dependent on the accurate prediction of total procedure time (TPT) per case. In this paper, we attempt to improve the accuracy of TPT predictions by using linear regression models based on estimated surgeon-controlled time (eSCT) and other variables relevant to TPT. We extracted data from a Dutch benchmarking database of all surgeries performed in six academic hospitals in The Netherlands from 2012 till 2016. The final dataset consisted of 79,983 records, describing 199,772 h of total OR time. Potential predictors of TPT that were included in the subsequent analysis were eSCT, patient age, type of operation, American Society of Anesthesiologists (ASA) physical status classification, and type of anesthesia used. First, we computed the predicted TPT based on a previously described fixed ratio model for each record, multiplying eSCT by 1.33. This number is based on the research performed by van Veen-Berkx et al., which showed that 33% of SCT is generally a good approximation of anesthesia-controlled time (ACT). We then systematically tested all possible linear regression models to predict TPT using eSCT in combination with the other available independent variables. In addition, all regression models were again tested without eSCT as a predictor to predict ACT separately (which leads to TPT by adding SCT). TPT was most accurately predicted using a linear regression model based on the independent variables eSCT, type of operation, ASA classification, and type of anesthesia. This model performed significantly better than the fixed ratio model and the method of predicting ACT separately. Making use of these more accurate predictions in planning and sequencing algorithms may enable an increase in utilization of ORs, leading to significant financial and productivity related benefits.

  2. Improving the Prediction of Total Surgical Procedure Time Using Linear Regression Modeling

    Directory of Open Access Journals (Sweden)

    Eric R. Edelman

    2017-06-01

    Full Text Available For efficient utilization of operating rooms (ORs, accurate schedules of assigned block time and sequences of patient cases need to be made. The quality of these planning tools is dependent on the accurate prediction of total procedure time (TPT per case. In this paper, we attempt to improve the accuracy of TPT predictions by using linear regression models based on estimated surgeon-controlled time (eSCT and other variables relevant to TPT. We extracted data from a Dutch benchmarking database of all surgeries performed in six academic hospitals in The Netherlands from 2012 till 2016. The final dataset consisted of 79,983 records, describing 199,772 h of total OR time. Potential predictors of TPT that were included in the subsequent analysis were eSCT, patient age, type of operation, American Society of Anesthesiologists (ASA physical status classification, and type of anesthesia used. First, we computed the predicted TPT based on a previously described fixed ratio model for each record, multiplying eSCT by 1.33. This number is based on the research performed by van Veen-Berkx et al., which showed that 33% of SCT is generally a good approximation of anesthesia-controlled time (ACT. We then systematically tested all possible linear regression models to predict TPT using eSCT in combination with the other available independent variables. In addition, all regression models were again tested without eSCT as a predictor to predict ACT separately (which leads to TPT by adding SCT. TPT was most accurately predicted using a linear regression model based on the independent variables eSCT, type of operation, ASA classification, and type of anesthesia. This model performed significantly better than the fixed ratio model and the method of predicting ACT separately. Making use of these more accurate predictions in planning and sequencing algorithms may enable an increase in utilization of ORs, leading to significant financial and productivity related

  3. Design of Elliptic Reflective LED Surgical Shadowless Lamps Using Mathematical Optical Tracing Algorithms

    Directory of Open Access Journals (Sweden)

    Cheng-Tang Pan

    2014-01-01

    Full Text Available Traditional surgical shadowless halogen lamps are generally designed as projection type with many light bulbs, which can produce not only mercury pollution but also heat radiation that are serious problems to patient. The study utilized Runge-Kutta methods and mathematical algorithms to design and optimize the freeform lens. The LED (light-emitting diode was adopted to replace the traditional halogen lamp. A uniform lens was designed and fabricated based on the energy conservation. At first, the light field of LED is concentrated through the freeform lens to improve the optical efficiency. Second, the three-shell elliptic curves are applied to the reflective surgical shadowless lamps, where only few LED chips are needed. Light rays emitting from different directions to the target plane can achieve the goal of shadowless. In this study, the LED’s luminance flux is 1,895 lm. The shadow dilution on the target plane is 54%. Ec (central illuminance is 114,900 lux, and the d50/d10 is 57% which is higher than the regulation by 7%, whereas the power consumption is only 20 W. The energy of reflective surgical shadowless lamps can save more than 50%, compared with the traditional projective one.

  4. Using a standards committee to design practical procedure system improvements

    International Nuclear Information System (INIS)

    Grider, D.A.; Plung, D.

    1993-01-01

    In the post-Three Mile Island (TMI) environment, numerous reports have been issued on how to improve the quality of procedures used at government and commercial nuclear facilities. The studies tend to be long on what is wrong with existing procedures and short on practical directions on how to fix those faults. Few of these studies have been conducted by practitioners with full-time procedure-managing or procedure writing experience. None of these studies go into detail on how to improve the procedure system itself. Over the last 10 yr, various nuclear facilities within the US Department of Energy (DOE) have carried out individual programs to develop procedures that meet post-TMI standards. However, ∼2 yr ago, DOE formed a Procedures Standards Committee to advise DOE in developing a set of post-TMI guidelines that could be consistently applied throughout all DOE nuclear facilities. The committee has achieved not only its original mission by producing a series of integrated guidance documents but has also evolved a systems approach to procedures management that sets new standards for procedure quality and efficiency. As members of this committee, the authors want to describe what has made the group's approach so successful. The lessons learned may be translatable to a wide range of government and commercial industry procedure programs

  5. The influence of a eutectic mixture of lidocaine and prilocaine on minor surgical procedures: a randomized controlled double-blind trial.

    LENUS (Irish Health Repository)

    Shaikh, Faisal M

    2012-01-31

    BACKGROUND: A eutectic mixture of lidocaine and prilocaine (EMLA) has been shown to be effective in reducing pain from needle sticks, including those associated with blood sampling and intravenous insertion. OBJECTIVE: To evaluate the effectiveness of EMLA cream applied before needle puncture for local anesthetic administration before minor surgical procedures in this double-blind, randomized, controlled, parallel-group study. MATERIALS AND METHODS: Patients were randomly assigned to receive EMLA or placebo cream (Aqueous) applied under an occlusive dressing. After the procedure, patients were asked to rate the needle prick and procedure pain on a visual analog scale (0=no pain; 10=maximum pain). RESULTS: A total of 94 minor surgical procedures (49 in EMLA and 45 in control) were performed. The mean needle-stick pain score in the EMLA group was significantly lower than in the control group (2.7 vs. 5.7, p<.001, Mann-Whitney U-test). There was also significantly lower procedure pain in the EMLA group than in the control group (0.83 vs. 1.86, p=.009). There were no complications associated with the use of EMLA. CONCLUSION: EMLA effectively reduces the preprocedural needle-stick pain and procedural pain associated with minor surgical procedures.

  6. Early and Late Results of the Nuss Procedure in Surgical Treatment of Pectus Excavatum in Different Age Groups.

    Science.gov (United States)

    Pawlak, Krystian; Gąsiorowski, Łukasz; Gabryel, Piotr; Gałęcki, Bartłomiej; Zieliński, Paweł; Dyszkiewicz, Wojciech

    2016-11-01

    The aim of this study was a comparison of early and late results in surgical treatment of funnel chest using the Nuss method in patients in various age groups to find the optimal age to perform the corrective procedure. Six hundred eighty patients operated on from June 2002 to October 2012 were included in the retrospective analysis. Patients were divided into 3 different age groups: group A = 156 patients from 7 to 14 years, group B = 328 patients aged 15 to 20 years, and group C = 196 patients older than 20 years of age. The mean follow-up was 33 months. Early non-life-threatening complications developed in 238 (35.0%) patients and frequency increased with age (group A, 24.3%; group B, 37.8%; group C, 38.8%; p = 0.0063). Good and very good corrective effects were achieved in 97.7 % of the entire patient population. Recurrence of the deformity was observed more often in younger patients (group A, 3.2 %) than in the other patients (group B, 1.2%; group C, 1.5%), although the difference between the studied groups was not significant (p = 0.3251). Good cosmetic results obtained with the use of the Nuss operation were not related to the age of the patients. The high incidence of minor complications in older patients seems to be an acceptable cost of a good cosmetic outcome and stable correction. Surgical morbidity is lowest in younger patients; however, the frequency of the recurrence of deformation is higher than in other groups. Copyright © 2016 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

  7. Model of Procedure Usage – Results from a Qualitative Study to Inform Design of Computer-Based Procedures

    Energy Technology Data Exchange (ETDEWEB)

    Johanna H Oxstrand; Katya L Le Blanc

    2012-07-01

    The nuclear industry is constantly trying to find ways to decrease the human error rate, especially the human errors associated with procedure use. As a step toward the goal of improving procedure use performance, researchers, together with the nuclear industry, have been looking at replacing the current paper-based procedures with computer-based procedure systems. The concept of computer-based procedures is not new by any means; however most research has focused on procedures used in the main control room. Procedures reviewed in these efforts are mainly emergency operating procedures and normal operating procedures. Based on lessons learned for these previous efforts we are now exploring a more unknown application for computer based procedures - field procedures, i.e. procedures used by nuclear equipment operators and maintenance technicians. The Idaho National Laboratory, the Institute for Energy Technology, and participants from the U.S. commercial nuclear industry are collaborating in an applied research effort with the objective of developing requirements and specifications for a computer-based procedure system to be used by field operators. The goal is to identify the types of human errors that can be mitigated by using computer-based procedures and how to best design the computer-based procedures to do this. The underlying philosophy in the research effort is “Stop – Start – Continue”, i.e. what features from the use of paper-based procedures should we not incorporate (Stop), what should we keep (Continue), and what new features or work processes should be added (Start). One step in identifying the Stop – Start – Continue was to conduct a baseline study where affordances related to the current usage of paper-based procedures were identified. The purpose of the study was to develop a model of paper based procedure use which will help to identify desirable features for computer based procedure prototypes. Affordances such as note taking, markups

  8. Surgical smoke.

    Science.gov (United States)

    Fan, Joe King-Man; Chan, Fion Siu-Yin; Chu, Kent-Man

    2009-10-01

    Surgical smoke is the gaseous by-product formed during surgical procedures. Most surgeons, operating theatre staff and administrators are unaware of its potential health risks. Surgical smoke is produced by various surgical instruments including those used in electrocautery, lasers, ultrasonic scalpels, high speed drills, burrs and saws. The potential risks include carbon monoxide toxicity to the patient undergoing a laparoscopic operation, pulmonary fibrosis induced by non-viable particles, and transmission of infectious diseases like human papilloma virus. Cytotoxicity and mutagenicity are other concerns. Minimisation of the production of surgical smoke and modification of any evacuation systems are possible solutions. In general, a surgical mask can provide more than 90% protection to exposure to surgical smoke; however, in most circumstances it cannot provide air-tight protection to the user. An at least N95 grade or equivalent respirator offers the best protection against surgical smoke, but whether such protection is necessary is currently unknown.

  9. On anti-earthquake design procedure of equipment and pipings in near future

    International Nuclear Information System (INIS)

    Shibata, H.

    1981-01-01

    The requirement of anti-earthquake design of nuclear power plants is getting severe year by year. The author will try to discuss how to control its severity and how to find a proper design procedure for licensing of new plants under such severe requirements. On the other hand we suffered from the enormous volumes of documents. To decrease such volumes, the format of documents should be standardized as well as the design procedure standardization. Starting from this point, we need the research and development on the following subjects: i) Standardization of design procedure. ii) Standardization of document. iii) Establishment of standard review procedure using computer. iv) Standardization of earthquake-resistant designed equipment. v) Standardization of anti-earthquake design procedure of piping systems. vi) Introducing margin evaluation procedure to design procedure. vii) Introducing proving test procedure of active component to design procedure. viii) Establishment of evaluation of human reliability in design, fabrication, inspection procedures. ix) Establishment of the proper relation of seismic trigger level and post-earthquake design procedures. (orig./HP)

  10. Protection of citizens' rights by appropriate design of legal procedures

    International Nuclear Information System (INIS)

    Bluemel, W.

    1982-01-01

    The author regards the Muehlheim-Kaerlich ruling by the Federal Constitutional Court of December 12, 1979 as a ruling which stipulates the protection of basic rights as a main function of the citizen participation. The essential importance of this ruling is specified by the statement that the shaping of procedures - of courts and authorities - has a constitutional importance, that the shaping of procedures is an essential element of an effective guarantee of basic rights. He expressly extends the above mentioned jurisdiction of the Federal Constitutional Court beyond the influence of the substantive basic rights on the procedural law to the administrative procedural law. The procedural basic right of article 19, section 4 of the constitution is supplemented by the claim for an effective legal protection which directly results from the substantive basic right of article 14, section 1, paragraph 1 of the constitution. (orig./HSCH) [de

  11. Surgical efficiencies and quality in the performance of voluntary medical male circumcision (VMMC procedures in Kenya, South Africa, Tanzania, and Zimbabwe.

    Directory of Open Access Journals (Sweden)

    Dino Rech

    Full Text Available This analysis explores the association between elements of surgical efficiency in voluntary medical male circumcision (VMMC, quality of surgical technique, and the amount of time required to conduct VMMC procedures in actual field settings. Efficiency outcomes are defined in terms of the primary provider's time with the client (PPTC and total elapsed operating time (TEOT.Two serial cross-sectional surveys of VMMC sites were conducted in Kenya, Republic of South Africa, Tanzania and Zimbabwe in 2011 and 2012. Trained clinicians observed quality of surgical technique and timed 9 steps in the VMMC procedure. Four elements of efficiency (task-shifting, task-sharing [of suturing], rotation among multiple surgical beds, and use of electrocautery and quality of surgical technique were assessed as explanatory variables. Mann Whitney and Kruskal Wallis tests were used in the bivariate analysis and linear regression models for the multivariate analyses to test the relationship between these five explanatory variables and two outcomes: PPTC and TEOT. The VMMC procedure TEOT and PPTC averaged 23-25 minutes and 6-15 minutes, respectively, across the four countries and two years. The data showed time savings from task-sharing in suturing and use of electrocautery in South Africa and Zimbabwe (where task-shifting is not authorized. After adjusting for confounders, results demonstrated that having a secondary provider complete suturing and use of electrocautery reduced PPTC. Factors related to TEOT varied by country and year, but task-sharing of suturing and/or electrocautery were significant in two countries. Quality of surgical technique was not significantly related to PPTC or TEOT, except for South Africa in 2012 where higher quality was associated with lower TEOT.SYMMACS data confirm the efficiency benefits of task-sharing of suturing and use of electrocautery for decreasing TEOT. Reduced TEOT and PPTC in high volume setting did not result in decreased

  12. One-step surgical procedure for the treatment of osteochondral defects with adipose-derived stem cells in a caprine knee defect: a pilot study

    NARCIS (Netherlands)

    Jurgens, W.J.F.M.; Kroeze, R.J.; Zandieh-Doulabi, B.; van Dijk, A.; Renders, G.A.P.; Smit, T.H.; van Milligen, F.J.; Ritt, M.J.P.F.

    2013-01-01

    Regenerative therapies offer attractive alternatives for the treatment of osteochondral defects. Adipose-derived stromal vascular fraction (SVF) cells allow the development of one-step surgical procedures by their abundant availability and high frequency. In this pilot study we evaluated the in vivo

  13. Weld Design, Testing, and Assessment Procedures for High Strength Pipelines

    Science.gov (United States)

    2011-12-20

    Long-distance high-strength pipelines are increasingly being constructed for the efficient transportation of energy products. While the high-strength linepipe steels and high productivity welding processes are being applied, the procedures employed f...

  14. Risk of transmission of sporadic Creutzfeldt-Jakob disease by surgical procedures: systematic reviews and quality of evidence.

    Science.gov (United States)

    López, Fernando J García; Ruiz-Tovar, María; Almazán-Isla, Javier; Alcalde-Cabero, Enrique; Calero, Miguel; de Pedro-Cuesta, Jesús

    2017-10-01

    Sporadic Creutzfeldt-Jakob disease (sCJD) is potentially transmissible to humans. This study aimed to summarise and rate the quality of the evidence of the association between surgery and sCJD. Firstly, we conducted systematic reviews and meta-analyses of case-control studies with major surgical procedures as exposures under study. To assess quality of evidence, we used the Grading of Recommendations, Assessment, Development and Evaluations (GRADE) approach. Secondly, we conducted a systematic review of sCJD case reports after sharing neurosurgical instruments. Thirteen case-control studies met the inclusion criteria for the systematic review of case-control studies. sCJD was positively associated with heart surgery, heart and vascular surgery and eye surgery, negatively associated with tonsillectomy and appendectomy, and not associated with neurosurgery or unspecified major surgery. The overall quality of evidence was rated as very low. A single case-control study with a low risk of bias found a strong association between surgery conducted more than 20 years before disease onset and sCJD. Seven cases were described as potentially transmitted by reused neurosurgical instruments. The association between surgery and sCJD remains uncertain. Measures currently recommended for preventing sCJD transmission should be strongly maintained. Future studies should focus on the potential association between sCJD and surgery undergone a long time previously.

  15. Does intravenous induction dosing among patients undergoing gastrointestinal surgical procedures follow current recommendations: a study of contemporary practice.

    Science.gov (United States)

    Akhtar, Shamsuddin; Liu, Jia; Heng, Joseph; Dai, Feng; Schonberger, Robert B; Burg, Matthew M

    2016-09-01

    It is recommended to correct intravenous induction doses by up to 50% for patients older than 65 years. The objectives were to determine (a) the degree to which anesthesia providers correct induction doses for age and (b) additionally adjust for American Society of Anesthesiologists physical status (ASA-PS) class (severity of illness) and (c) whether postinduction hypotension is more common among patients aged >65. Retrospective chart review. Academic medical center. A total of 1869 adult patients receiving general anesthesia for GI surgical procedures from February 2013 to January 2014. Patients were divided into 3 age groups (age 80, which was still in less than the recommendations. An inverse relationship was observed between propofol dosing and ASA-PS class, but no consistent relationship was noted for fentanyl and midazolam. There were a significantly larger drop in mean arterial pressure and a greater likelihood of hypotension following induction in patients aged 65-79 years and >80 years as compared with those aged <65 years. This study shows that the administered dose of anesthetic induction agents is significantly higher than that recommended for patients older than 65 years. This failure to age-adjust dose may contribute to hypotensive episodes. Copyright © 2016 Elsevier Inc. All rights reserved.

  16. A surrogate based multistage-multilevel optimization procedure for multidisciplinary design optimization

    NARCIS (Netherlands)

    Yao, W.; Chen, X.; Ouyang, Q.; Van Tooren, M.

    2011-01-01

    Optimization procedure is one of the key techniques to address the computational and organizational complexities of multidisciplinary design optimization (MDO). Motivated by the idea of synthetically exploiting the advantage of multiple existing optimization procedures and meanwhile complying with

  17. Mastectomy -- The Surgical Procedure

    Science.gov (United States)

    ... Médico Datos Para la Vida Komen Guía de herramientas de educación sobre el cancer de seno para ... the breast tissue. In most, but not all cases, the nipple and areola are also removed. The ...

  18. IC Treatment: Surgical Procedures

    Science.gov (United States)

    ... Bowel Syndrome Lupus Pelvic Floor Dysfunction Pudendal Neuralgia Sjogren’s Syndrome Vulvodynia Newly Diagnosed Toolkit IC Awareness Toolkit Know ... Bowel Syndrome Lupus Pelvic Floor Dysfunction Pudendal Neuralgia Sjogren’s Syndrome Vulvodynia Newly Diagnosed Toolkit IC Awareness Toolkit Know ...

  19. Using an Individual Procedure Score Before and After the Advanced Surgical Skills Exposure for Trauma Course Training to Benchmark a Hemorrhage-Control Performance Metric.

    Science.gov (United States)

    Mackenzie, Colin F; Garofalo, Evan; Shackelford, Stacy; Shalin, Valerie; Pugh, Kristy; Chen, Hegang; Puche, Adam; Pasley, Jason; Sarani, Babak; Henry, Sharon; Bowyer, Mark

    2015-01-01

    Test with an individual procedure score (IPS) to assess whether an unpreserved cadaver trauma training course, including upper and lower limb vascular exposure, improves correct identification of surgical landmarks, underlying anatomy, and shortens time to vascular control. Prospective study of performance of 3 vascular exposure and control procedures (axillary, brachial, and femoral arteries) using IPS metrics by 2 colocated and trained evaluators before and after training with the Advanced Surgical Skills Exposure for Trauma (ASSET) course. IPS, including identification of anatomical landmarks, incisions, underlying structures, and time to completion of each procedure was compared before and after training using repeated measurement models. Audio-video instrumented cadaver laboratory at University of Maryland School of Medicine. A total of 41 second to sixth year surgical residents from surgical programs throughout Mid-Atlantic States who had not previously taken the ASSET course were enrolled, 40 completed the pre- and post-ASSET performance evaluations. After ASSET training, all components of IPS increased and time shortened for each of the 3 artery exposures. Procedure steps performed correctly increased 57%, anatomical knowledge increased 43% and skin incision to passage of a vessel loop twice around the correct vessel decreased by a mean of 2.5 minutes. An overall vascular trauma readiness index, a comprehensive IPS score for 3 procedures increased 28% with ASSET Training. Improved knowledge of surface landmarks and underlying anatomy is associated with increased IPS, faster procedures, more accurate incision placement, and successful vascular control. Structural recognition during specific procedural steps and anatomical knowledge were key points learned during the ASSET course. Such training may accelerate acquisition of specific trauma surgery skills to compensate for shortened training hours, infrequent exposure to major vascular injuries, or when just

  20. The effect of implementing cognitive load theory-based design principles in virtual reality simulation training of surgical skills: a randomized controlled trial

    DEFF Research Database (Denmark)

    Andersen, Steven Arild Wuyts; Mikkelsen, Peter Trier; Konge, Lars

    2016-01-01

    training of mastoidectomy. Methods Eighteen novice medical students received 1 h of self-directed virtual reality simulation training of the mastoidectomy procedure randomized for standard instructions (control) or cognitive load theory-based instructions with a worked example followed by a problem......Background Cognitive overload can inhibit learning, and cognitive load theory-based instructional design principles can be used to optimize learning situations. This study aims to investigate the effect of implementing cognitive load theory-based design principles in virtual reality simulation....... Increased cognitive load when part tasks needed to be integrated in the post-training procedures could be a possible explanation for this. Other instructional designs and methods are needed to lower the cognitive load and improve the performance in virtual reality surgical simulation training of novices....

  1. Design and optimisation of purification procedure for biodiesel washing

    Directory of Open Access Journals (Sweden)

    S.B. Glišić

    2009-09-01

    Full Text Available Almost complete methanolysis of triglycerides is usually not enough to fulfil the strict standards of biodiesel quality. A key step in this process is neutralization of alkali (catalyst followed by the washing procedure necessary for removing different impurities such as traces of catalyst and methanol and removal of soaps and glycerol from esters phase. The washing with hot water is still widely used in many industrial units for the biodiesel production. In this study, different procedures of biodiesel washing using hot water were investigated. The orto-phosphoric acid was suggested as the best compound for alkali catalyst (sodium hydroxide neutralization. The main goal of the performed analysis was to minimize the water usage in the washing-neutralization step during the biodiesel production. Such solution would make the process of biodiesel synthesis more economical taking into account the decrease of energy consumed for evaporation of water during the final product purification, as well as more acceptable procedure related to the impact on environment (minimal waste water release. Results of the performed simulation of the washing process supported by original experimental data suggested that neutralization after the optimized washing process of the methyl ester layer could be the best solution. The proposed washing procedure significantly decreases the amount of waste water giving at the same time the desired purity of final products (biodiesel and glycerol. The simulation of the process was performed using ASPEN plus software supported by ELCANTREL and UNIQUAC procedure of required properties calculation

  2. Recent advances in design procedures for high temperature plant

    International Nuclear Information System (INIS)

    1988-01-01

    Thirteen papers cover several aspects of design for high temperature plant. These include design codes, computerized structural analysis and mechanical properties of materials at high temperatures. Seven papers are relevant for fast reactors and these are indexed separately. These cover shakedown design, design codes for thin shells subjected to cyclic thermal loading, the inelastic behaviour of stainless steels and creep and crack propagation in reactor structures under stresses caused by thermal cycling loading. (author)

  3. A surrogate based multistage-multilevel optimization procedure for multidisciplinary design optimization

    OpenAIRE

    Yao, W.; Chen, X.; Ouyang, Q.; Van Tooren, M.

    2011-01-01

    Optimization procedure is one of the key techniques to address the computational and organizational complexities of multidisciplinary design optimization (MDO). Motivated by the idea of synthetically exploiting the advantage of multiple existing optimization procedures and meanwhile complying with the general process of satellite system design optimization in conceptual design phase, a multistage-multilevel MDO procedure is proposed in this paper by integrating multiple-discipline-feasible (M...

  4. The comparison of an inexpensive-modified transobturator vaginal tape versus TVT-O procedure for the surgical treatment of female stress urinary incontinence.

    Science.gov (United States)

    Zhang, Yan; Jiang, Min; Tong, Xiao-Wen; Fan, Bo-Zhen; Li, Huai-Fang; Chen, Xin-Liang

    2011-09-01

    To compare the safety and efficacy of an inexpensive-modified transobturator vaginal tape procedure with the transobturator tension-free vaginal tape (TVT-O) procedure for the surgical treatment of female stress urinary incontinence (SUI). Patients with SUI were randomly allocated to either the test group receiving the inexpensive-modified transobturator vaginal tape procedure or the control group receiving the GYNECARE TVT-O procedure. Treatment outcomes and Quality-of-life scores were recorded and analyzed between two groups. A total of 156 patients were enrolled in this trial. Eighty patients underwent the modified transobturator vaginal tape procedure. Among them 75(93.8%) were cured and 5(6.2%) were improved. The rest of the 76 patients underwent the GYNECARE TVT-O procedure with a 92% (70 of 76) cure rate and an 8% (6 of 76) improvement rate. No inefficient or aggravated cases occurred in both groups. The success rates between groups had no significant statistic difference (p > 0.05). The operative time, blood loss, hospital stay, and medical cost were significantly lower in the test group (p < 0.01); the increases in Quality-of-life scores were comparable between groups. The modified transobturator vaginal tape procedure is an efficacious and economic surgical treatment for female SUI. Copyright © 2011. Published by Elsevier B.V.

  5. Multicenter study on costs associated with two surgical procedures: GreenLight XPS 180 W versus the gold standard transurethral resection of the prostate.

    Science.gov (United States)

    Benejam-Gual, J M; Sanz-Granda, A; Budía, A; Extramiana, J; Capitán, C

    2014-01-01

    To analyze the costs associated with two surgical procedures for lower urinary tract symptoms secondary to benign prostatic hyperplasia: GreenLight XPS 180¦W versus the gold standard transurethral resection of the prostate. A multicenter, retrospective cost study was carried out from the National Health Service perspective, over a 3-month time period. Costs were broken down into pre-surgical, surgical and post-surgical phases. Data were extracted from records of patients operated sequentially, with IPSS=15, Qmax=15 mL/seg and a prostate volume of 40-80mL, adding only direct healthcare costs (€, 2013) associated with the procedure and management of complications. A total of 79 patients sequentially underwent GL XPS (n: 39) or TURP (n: 40) between July and October, 2013. Clinical outcomes were similar (94.9% and 92.5%, GL XPS and TURP, respectively) without significant differences (P=.67). The average direct cost per patient was reduced by €114 in GL XPS versus TURP patients; the cost was higher in the surgical phase with GL XPS (difference: €1,209; P<.001) but was lower in the post-surgical phase (difference: €-1,351; P<.001). The GreenLight XPS 180-W laser system is associated with a reduction in costs with respect to transurethral resection of prostate in the surgical treatment of LUTS secondary to PBH. This reduction is due to a shorter inpatient length of stay that offsets the cost of the new technology. Copyright © 2013 AEU. Published by Elsevier Espana. All rights reserved.

  6. Improved Design of Crew Operation in Computerized Procedure System of APR1400

    Energy Technology Data Exchange (ETDEWEB)

    Seong, No Kyu; Jung, Yeon Sub; Sung, Chan Ho [KHNP, Daejeon (Korea, Republic of)

    2016-05-15

    The operators perform the paper-based procedures in analog-based conventional main control room (MCR) depending on only communications between operators except a procedure controller such as a Shift Supervisor (SS), however in digital-based MCR the operators can confirm the procedures simultaneously in own console when the procedure controller of computerized procedure (CP) opens the CP. The synchronization and a synchronization function between procedure controller and other operators has to be considered to support the function of crew operation. This paper suggests the improved design of crew operation in computerized procedure system of APR1400. This paper suggests the improved design of APR1400 CPS. These improvements can help operators perform the crew procedures more efficiently. And they reduce a burden of communication and misunderstanding of computerized procedures. These improvements can be applied to CPS after human factors engineering verification and validation.

  7. design chart procedures for polygonal concrete-filled steel columns

    African Journals Online (AJOL)

    ADMIN

    hexagonal and octagonal steel-concrete composite columns subjected to ... This paper also outlines procedures that will enable preparation of ... buildings and in a variety of large-span building ... Likewise, hot-rolled steel tubes are used while ... small moderate large. Fig. 2. Possible arrangement of composite polygonal ...

  8. Urethral bulking agents versus other surgical procedures for the treatment of female stress urinary incontinence: a systematic review and meta-analysis.

    Science.gov (United States)

    Leone Roberti Maggiore, Umberto; Bogani, Giorgio; Meschia, Michele; Sorice, Paola; Braga, Andrea; Salvatore, Stefano; Ghezzi, Fabio; Serati, Maurizio

    2015-06-01

    Bulking agents provide an alternative option in the management of women with stress urinary incontinence and they seem to have an important role in the management flow chart of SUI. However, evidence on this issue is scanty. The most important aspect is to understand whether bulking agents are comparable with the other first-line anti-incontinence surgical procedure (MUS, Burch colposuspension and pubovaginal slings). Hence, the primary aim of the current review was to assess the objective and subjective outcomes of bulking agents in comparison with the other surgical procedures for the treatment of SUI. PubMed and Medline were systematically searched and we included studies evaluating the use of bulking agents in comparison with other surgical approaches for either primary or recurrent treatment of female SUI. Three studies meeting the inclusion criteria were identified. Two of these studies were RCTs evaluating the use of bulking agents versus other surgical procedures for the treatment of primary female SUI; the remnant article was a retrospective cohort study that compared the effectiveness and safety of repeat midurethral sling with urethral bulking after failed midurethral sling. The combined results of all analyses showed that the objective recurrence rate of peri- or trans-urethral injections is significantly higher in comparison with the other surgical procedures. Similar findings were observed when considering separately the treatment for primary or recurrent SUI. Furthermore, lower subjective recurrence rate was observed among patients undergoing other surgical treatment in comparison with those undergoing bulking agents; however, this trend was not statistically significant. Moreover, patients undergoing injection of bulking agents experienced a lower rate of voiding dysfunctions in comparison to the control group. According to current evidence, bulking agents should not be proposed as first-line treatment in those women seeking permanent cure for both

  9. Trends analysis of surgical procedures for cervical degenerative disc disease and myelopathy in patients with tobacco use disorder.

    Science.gov (United States)

    Grisdela, Phillip; Buser, Zorica; D'Oro, Anthony; Paholpak, Permsak; Liu, John C; Wang, Jeffrey C

    2017-09-01

    This study defined the incidence and trends of surgeries performed for patients with cervical disc degeneration with and without tobacco use disorder (TUD). This study utilized the Humana Inc. database between 2007 and 2013 to identify patients with cervical disc degeneration with or without myelopathy. International Classification of Diseases, ninth revision (ICD-9) and Current Procedural Terminology (CPT) codes determined the initial diagnosis of disc degeneration, myelopathy status and TUD, whether patients received surgery, and TUD status at surgery. The prevalence of disc degeneration with myelopathy increased by 32.8% between 2007 and 2013, while disc disease with myelopathy and TUD increased by 91.6%. For patients without myelopathy, the prevalence of disc degeneration alone increased by 65.4%, and disc degeneration with myelopathy increased by 148.7%. Of myelopathy patients, 1717 (6.4%) had TUD and 1024 (59.6%) received surgery, compared to 6508 patients without TUD (26.1%). For patients without myelopathy, 11,337 (3.5%) had TUD and 787 (6.9%) underwent surgery, compared to 9716 patients (3%) without TUD. Of surgical patients, 781 (76.3%) with myelopathy and TUD still had a TUD diagnosis at surgery, and 542 (68.9%) of patients without myelopathy still had a TUD diagnosis at surgery. The prevalence of degenerative disc disease and TUD has increased more than disc disease alone. Patients with TUD were more likely to get surgery, and to have surgeries earlier than patients without TUD. Patients with TUD at the time of the diagnosis of their disc degeneration likely still had a TUD diagnosis at the time of surgery.

  10. Analysis of half diallel mating designs I: a practical analysis procedure for ANOVA approximation.

    Science.gov (United States)

    G.R. Johnson; J.N. King

    1998-01-01

    Procedures to analyze half-diallel mating designs using the SAS statistical package are presented. The procedure requires two runs of PROC and VARCOMP and results in estimates of additive and non-additive genetic variation. The procedures described can be modified to work on most statistical software packages which can compute variance component estimates. The...

  11. Use of Quantile Regression to Determine the Impact on Total Health Care Costs of Surgical Site Infections Following Common Ambulatory Procedures.

    Science.gov (United States)

    Olsen, Margaret A; Tian, Fang; Wallace, Anna E; Nickel, Katelin B; Warren, David K; Fraser, Victoria J; Selvam, Nandini; Hamilton, Barton H

    2017-02-01

    To determine the impact of surgical site infections (SSIs) on health care costs following common ambulatory surgical procedures throughout the cost distribution. Data on costs of SSIs following ambulatory surgery are sparse, particularly variation beyond just mean costs. We performed a retrospective cohort study of persons undergoing cholecystectomy, breast-conserving surgery, anterior cruciate ligament reconstruction, and hernia repair from December 31, 2004 to December 31, 2010 using commercial insurer claims data. SSIs within 90 days post-procedure were identified; infections during a hospitalization or requiring surgery were considered serious. We used quantile regression, controlling for patient, operative, and postoperative factors to examine the impact of SSIs on 180-day health care costs throughout the cost distribution. The incidence of serious and nonserious SSIs was 0.8% and 0.2%, respectively, after 21,062 anterior cruciate ligament reconstruction, 0.5% and 0.3% after 57,750 cholecystectomy, 0.6% and 0.5% after 60,681 hernia, and 0.8% and 0.8% after 42,489 breast-conserving surgery procedures. Serious SSIs were associated with significantly higher costs than nonserious SSIs for all 4 procedures throughout the cost distribution. The attributable cost of serious SSIs increased for both cholecystectomy and hernia repair as the quantile of total costs increased ($38,410 for cholecystectomy with serious SSI vs no SSI at the 70th percentile of costs, up to $89,371 at the 90th percentile). SSIs, particularly serious infections resulting in hospitalization or surgical treatment, were associated with significantly increased health care costs after 4 common surgical procedures. Quantile regression illustrated the differential effect of serious SSIs on health care costs at the upper end of the cost distribution.

  12. A robust anti-windup design procedure for SISO systems

    Science.gov (United States)

    Kerr, Murray; Turner, Matthew C.; Villota, Elizabeth; Jayasuriya, Suhada; Postlethwaite, Ian

    2011-02-01

    A model-based anti-windup (AW) controller design approach for constrained uncertain linear single-input-single-output (SISO) systems is proposed based on quantitative feedback theory (QFT) loopshaping. The design approach explicitly incorporates uncertainty, is suitable for the solution of both the magnitude and rate saturation problems, and provides for the design of low-order AW controllers satisfying robust stability and robust performance objectives. Robust stability is enforced using absolute stability theory and generic multipliers (i.e. circle, Popov, Zames-Falb), and robust performance is enforced using linear lower-bounds on the input-output maps capturing the effects of saturation as a metric. Two detailed design examples are presented. These show that even for simple systems, certain popular AW techniques lead to compensators that may fail to ensure robust stability and performance when saturation is encountered, but that the proposed QFT design approach is able to handle both saturation and uncertainty effectively.

  13. Design procedure for sizing a submerged-bed scrubber for airborne particulate removal

    International Nuclear Information System (INIS)

    Ruecker, C.M.; Scott, P.A.

    1987-04-01

    Performance correlations to design and operate the submerged bed scrubber were developed for various applications. Structural design procedure outlined in this report focuses on off-gas scrubbing for HLW vitrification applications; however, the method is appropriate for other applications

  14. A CFD-based aerodynamic design procedure for hypersonic wind-tunnel nozzles

    Science.gov (United States)

    Korte, John J.

    1993-01-01

    A new procedure which unifies the best of current classical design practices, computational fluid dynamics (CFD), and optimization procedures is demonstrated for designing the aerodynamic lines of hypersonic wind-tunnel nozzles. The new procedure can be used to design hypersonic wind tunnel nozzles with thick boundary layers where the classical design procedure has been shown to break down. An efficient CFD code, which solves the parabolized Navier-Stokes (PNS) equations using an explicit upwind algorithm, is coupled to a least-squares (LS) optimization procedure. A LS problem is formulated to minimize the difference between the computed flow field and the objective function, consisting of the centerline Mach number distribution and the exit Mach number and flow angle profiles. The aerodynamic lines of the nozzle are defined using a cubic spline, the slopes of which are optimized with the design procedure. The advantages of the new procedure are that it allows full use of powerful CFD codes in the design process, solves an optimization problem to determine the new contour, can be used to design new nozzles or improve sections of existing nozzles, and automatically compensates the nozzle contour for viscous effects as part of the unified design procedure. The new procedure is demonstrated by designing two Mach 15, a Mach 12, and a Mach 18 helium nozzles. The flexibility of the procedure is demonstrated by designing the two Mach 15 nozzles using different constraints, the first nozzle for a fixed length and exit diameter and the second nozzle for a fixed length and throat diameter. The computed flow field for the Mach 15 least squares parabolized Navier-Stokes (LS/PNS) designed nozzle is compared with the classically designed nozzle and demonstrates a significant improvement in the flow expansion process and uniform core region.

  15. Design and fabrication procedures of Super-Phenix fuel elements

    International Nuclear Information System (INIS)

    Leclere, J.; Vialard, J.-L.; Delpeyroux, P.

    1975-01-01

    For Super-Phenix fuel assemblies, Phenix technological arrangements will be used again, but they will be simplified as far as possible. The maximum fuel can temperature has been lowered in order to obtain a good behavior of hexagonal tubes and cans at high irradiation levels. An important experimental programme and the experience gained from Phenix operation will confirm the merits of the options retained. The fuel element fabrication is envisaged to take place in the plutonium workshop at Cadarache. Usual procedures will be employed and both reliability and automation will be increased [fr

  16. "In situ preparation": new surgical procedure indicated for soft-tissue sarcoma of a lower limb in close proximity to major neurovascular structures.

    Science.gov (United States)

    Matsumoto, Seiichi; Kawaguchi, Noriyoshi; Manabe, Jun; Matsushita, Yasushi

    2002-02-01

    When soft-tissue sarcomas occur near neurovascular structures, preoperative images cannot always reveal the accurate relationship between the tumor and these structures. Therefore, in some patients, neurovascular structures are sacrificed unnecessarily. In other patients, neurovascular structures are preserved with an inappropriate margin, followed by local recurrence. The objective of this study was to evaluate a new surgical method, "in situ preparation" (ISP), which enables the preparation of neurovascular bundles and the intraoperative evaluation of the surgical margin without contamination by tumor cells. With this method, additional procedures, including pasteurization, alcohol soaking, and distilled water soaking of the preserved neurovascular bundle can also be performed to preserve the continuity of vessels. Between April 1992 and December 1998, 18 patients with soft-tissue sarcoma were operated on using ISP. The tumor and neurovascular structure were lifted en bloc from the surgical bed and separated from the field by the use of a vinyl sheet. The consistency of the neurovascular structures was preserved. The tissue block could be freely turned around and the neurovascular structure was separated from the block through the nearest approach. The margin between the tumor and neurovascular structure was evaluated, and an additional procedure, such as pasteurization, alcohol soaking or distilled water soaking, was performed, according to the safety of the surgical margin. Only one patient showed recurrence after ISP. Complications after ISP were arterial occlusion in two patients and nerve palsy in three patients. The main cause of these complications was the long period of pasteurization; modified additional procedures could prevent such complications. ISP is a useful method with which to ensure a safe surgical margin and good functional results.

  17. 40 CFR 240.203-2 - Recommended procedures: Design.

    Science.gov (United States)

    2010-07-01

    ..., easy to maintain, and consistent with the land use of the area. (d) Employee convenience facilities and... operating unit malfunctions. (j) Sampling capability should be designed into the facility so that each process stream can be sampled, and the utilities required to do so should be close at hand. The sampling...

  18. Designing sustainable energy landscapes : concepts, principles and procedures

    NARCIS (Netherlands)

    Stremke, S.

    2010-01-01

    The depletion of fossil fuels, in combination with climate change, necessitates a transition to sustainable energy systems. Such systems are characterized by a decreased energy demand and an increase in the use of renewables. The objective of this dissertation is to advance the planning and design

  19. Students' Design of a Biometric Procedure in Upper Secondary School

    Science.gov (United States)

    Marzin, Patricia; de Vries, Erica

    2013-01-01

    Making the connection between science and technology might be important for students to learn to identify and solve problems and to acquire scientific knowledge and skills. The research reported in this article concerned the development of a design situation in a science classroom and the study of students performing in this situation. More…

  20. 17 CFR 38.3 - Procedures for designation.

    Science.gov (United States)

    2010-04-01

    ... application for designation with the Secretary of the Commission at its Washington, DC, headquarters. Except... partnership or limited liability company, third-party regulatory service, or member or user agreements, that... filing such a request with the Commission at its Washington, DC, headquarters. Withdrawal of an...

  1. Framework for a procedure for design for durability

    NARCIS (Netherlands)

    Siemes, A.J.M.

    1996-01-01

    The design for durability of structures and building components is in general based on implicit requirements with respect to the quality and dimensions of the composing building materials and components. These requirements are based on long term experience. This approach has disadvantages. It is

  2. Surgical implications of perimodiolar cochlear implant electrode design: avoiding intracochlear damage and scala vestibuli insertion.

    Science.gov (United States)

    Briggs, R J; Tykocinski, M; Saunders, E; Hellier, W; Dahm, M; Pyman, B; Clark, G M

    2001-09-01

    To review the mechanisms and nature of intracochlear damage associated with cochlear implant electrode array insertion, in particular, the various perimodiolar electrode designs. Make recommendations regarding surgical techniques for the Nucleus Contour electrode to ensure correct position and minimal insertion trauma. The potential advantages of increased modiolar proximity of intracochlear multichannel electrode arrays are a reduction in stimulation thresholds, an increase in dynamic range and more localized neural excitation. This may improve speech perception and reduce power consumption. These advantages may be negated if increased intracochlear damage results from the method used to position the electrodes close to the modiolus. A review of the University of Melbourne Department of Otolaryngology experience with temporal bone safety studies using the Nucleus standard straight electrode array and a variety of perimodiolar electrode array designs; comparison with temporal bone insertion studies from other centres and postmortem histopathology studies reported in the literature. Review of our initial clinical experience using the Nucleus Contour electrode array. The nature of intracochlear damage resulting from electrode insertion trauma ranges from minor, localized, spiral ligament tear to diffuse organ of Corti disruption and osseous spiral lamina fracture. The type of damage depends on the mechanical characteristics of the electrode array, the stiffness, curvature and size of the electrode in relation to the scala, and the surgical technique. The narrow, flexible, straight arrays are the least traumatic. Pre-curved or stiffer arrays are associated with an incidence of basilar membrane perforation. The cochleostomy must be correctly sited in relation to the round window to ensure scala tympani insertion. A cochleostomy anterior to the round window rather than inferior may lead to scala media or scala vestibuli insertion. Proximity of electrodes to the modiolus

  3. New procedure to design low radar cross section near perfect isotropic and homogeneous triangular carpet cloaks.

    Science.gov (United States)

    Sharifi, Zohreh; Atlasbaf, Zahra

    2016-10-01

    A new design procedure for near perfect triangular carpet cloaks, fabricated based on only isotropic homogeneous materials, is proposed. This procedure enables us to fabricate a cloak with simple metamaterials or even without employing metamaterials. The proposed procedure together with an invasive weed optimization algorithm is used to design carpet cloaks based on quasi-isotropic metamaterial structures, Teflon and AN-73. According to the simulation results, the proposed cloaks have good invisibility properties against radar, especially monostatic radar. The procedure is a new method to derive isotropic and homogeneous parameters from transformation optics formulas so we do not need to use complicated structures to fabricate the carpet cloaks.

  4. A COMPARATIVE STUDY OF 2 AGENTS, AIR AND DISTILLED WATER FOR INFLATION OF THE CUFFS OF ENDOTRACHEAL TUBES DURING LAPAROSCOPIC SURGICAL PROCEDURES UNDER GENERAL ANAESTHESIA

    Directory of Open Access Journals (Sweden)

    Sistla Gopala Krishna

    2016-03-01

    Full Text Available BACKGROUND & AIM During Nitrous Oxide+ Oxygen anaesthesia and during laparoscopic surgeries using carbon dioxide for creating pneumoperitoneum, if cuff of endotracheal tube is inflated with air, cuff pressure can rise to dangerous limits and it can produce ischemia of tracheal mucosa. Hence distilled water as an alternative agent to air for inflation of cuffs of endotracheal tubes was used for our study. Our aim is to investigate the difference in increase of intra-cuff pressure with time during laparoscopic surgical procedures under general endotracheal anaesthesia with Nitrous oxide+ Oxygen+ relaxant technique when cuffs of endotracheal tube were inflated by air & distilled water. METHODS Fifty patients (n=50 undergoing different laparoscopic surgical procedures under general endotracheal anaesthesia were randomly divided into 2 groups. In group A, air was used & in group D, distilled water was used to inflate the cuffs of endotracheal tubes. General anaesthesia was given with Nitrous oxide+ Oxygen+ relaxant technique. The intra-cuff pressures of endotracheal tube cuffs were recorded in the beginning and at the end of laparoscopic surgical procedures. Increase of pressures with time were recorded and analysed. RESULTS In group in whom we inflated the cuffs with air, there was a significant increase in intra-cuff pressures with time and there was definite diffusion of gases into the cuffs. Increase of pressure with time was statistically highly significant (P=0.00001. But in group in whom we used distilled water to inflate the cuffs, there was no change in the volume of water used for inflation and water came out of cuffs at the end of the laparoscopic surgical procedures. No additional air could be aspirated from the cuffs at the end of laparoscopic surgeries in distilled water group, indicating that there was no diffusion of gases into the cuffs or the gases diffused got dissolved in distilled water. Hence there was no increase of volume

  5. An annotated summary of the Information Model Design Procedure (IMDP)

    Energy Technology Data Exchange (ETDEWEB)

    Becker, S.D.

    1994-05-01

    This presentation documents the essential elements of the IMDP as applied at Sandia National Laboratories/New Mexico. The IMDP is an adaptation of the Natural-Language Information Analysis Methodology (NIAM) of G. M. Nijssen. The underlying purpose of both of these methodologies is to provide a formal, reproducible, and verifiable approach to specifying the information requirements of an information system. The IMDP spans the specification process from initial scoping; through verbalization of problem-domain facts, specification of constraints, and subtype analysis; and finally to application of a formal algorithm for developing a fifth-normal-form relational database design.

  6. Development of an optimized procedure bridging design and structural analysis codes for the automatized design of the SMART

    International Nuclear Information System (INIS)

    Kim, Tae Wan; Park, Keun Bae; Choi, Suhn; Kim, Kang Soo; Jeong, Kyeong Hoon; Lee, Gyu Mahn

    1998-09-01

    In this report, an optimized design and analysis procedure is established to apply to the SMART (System-integrated Modular Advanced ReacTor) development. The development of an optimized procedure is to minimize the time consumption and engineering effort by squeezing the design and feedback interactions. To achieve this goal, the data and information generated through the design development should be directly transferred to the analysis program with minimum operation. The verification of the design concept requires considerable effort since the communication between the design and analysis involves time consuming stage for the conversion of input information. In this report, an optimized procedure is established bridging the design and analysis stage utilizing the IDEAS, ABAQUS and ANSYS. (author). 3 refs., 2 tabs., 5 figs

  7. Accuracy of Computer-Assisted Template-Guided Autotransplantation of Teeth With Custom Three-Dimensional Designed/Printed Surgical Tooling: A Cadaveric Study.

    Science.gov (United States)

    Anssari Moin, David; Verweij, Jop Pieter; Waars, Hugo; van Merkesteyn, Richard; Wismeijer, Daniel

    2017-05-01

    The aim of the present cadaveric study was to assess the accuracy of computer-assisted template-guided autotransplantation of teeth with custom 3-dimensional (3D) designed/printed surgical tooling. Ten partially edentulous human mandibular cadavers were scanned using a cone-beam computed tomography (CBCT) system and an intraoral scanning system. The 3D data of these cadavers were imported to specialized software and used to analyze the region of the recipient sites, and the donor teeth were selected. Subsequently, congruent to the donor teeth, custom surgical tooling and surgical-guided templates were designed and 3D printed. The guided osteotomies were performed and the donor teeth transplanted. To evaluate the planned donor teeth positions compared with the transplanted donor teeth positions, the mandibles were scanned again using the CBCT system, and software matching was applied to measure the accuracy of the procedure. The mean angular deflection of the transplanted donor teeth with the planned donor teeth positions was 5.6 ± 5.4°. Comparing the 3D positions of the shoulders, a mean deviation of 3.15 ± 1.16 mm and a mean apical deviation of 2.61 ± 0.78 mm were found. The described method of computer-assisted template-guided autotransplantation of teeth with custom 3D designed/printed surgical tooling could potentially provide a relatively accurate alternative for the currently available treatment approaches. Further research should focus on improving the accuracy of this technique and evaluating the clinical success and advantages of this method. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  8. Application of virtual surgical planning with computer assisted design and manufacturing technology to cranio-maxillofacial surgery.

    Science.gov (United States)

    Zhao, Linping; Patel, Pravin K; Cohen, Mimis

    2012-07-01

    Computer aided design and manufacturing (CAD/CAM) technology today is the standard in manufacturing industry. The application of the CAD/CAM technology, together with the emerging 3D medical images based virtual surgical planning (VSP) technology, to craniomaxillofacial reconstruction has been gaining increasing attention to reconstructive surgeons. This article illustrates the components, system and clinical management of the VSP and CAD/CAM technology including: data acquisition, virtual surgical and treatment planning, individual implant design and fabrication, and outcome assessment. It focuses primarily on the technical aspects of the VSP and CAD/CAM system to improve the predictability of the planning and outcome.

  9. Design and analysis of automobile components using industrial procedures

    Science.gov (United States)

    Kedar, B.; Ashok, B.; Rastogi, Nisha; Shetty, Siddhanth

    2017-11-01

    Today’s automobiles depend upon mechanical systems that are crucial for aiding in the movement and safety features of the vehicle. Various safety systems such as Antilock Braking System (ABS) and passenger restraint systems have been developed to ensure that in the event of a collision be it head on or any other type, the safety of the passenger is ensured. On the other side, manufacturers also want their customers to have a good experience while driving and thus aim to improve the handling and the drivability of the vehicle. Electronics systems such as Cruise Control and active suspension systems are designed to ensure passenger comfort. Finally, to ensure optimum and safe driving the various components of a vehicle must be manufactured using the latest state of the art processes and must be tested and inspected with utmost care so that any defective component can be prevented from being sent out right at the beginning of the supply chain. Therefore, processes which can improve the lifetime of their respective components are in high demand and much research and development is done on these processes. With a solid base research conducted, these processes can be used in a much more versatile manner for different components, made up of different materials and under different input conditions. This will help increase the profitability of the process and also upgrade its value to the industry.

  10. Increasing spelling achievement: an analysis of treatment procedures utilizing an alternating treatments design.

    OpenAIRE

    Ollendick, T H; Matson, J L; Esveldt-Dawson, K; Shapiro, E S

    1980-01-01

    Two studies which examine the effectiveness of spelling remediation procedures are reported. In both studies, an alternating treatment design was employed. In the first study, positive practice overcorrection plus positive reinforcement was compared to positive practice alone and a no-remediation control condition. In the second study, positive practice plus positive reinforcement was compared to a traditional corrective procedure plus positive reinforcement and a traditional procedure when u...

  11. Looking at plastic surgery through Google Glass: part 1. Systematic review of Google Glass evidence and the first plastic surgical procedures.

    Science.gov (United States)

    Davis, Christopher R; Rosenfield, Lorne K

    2015-03-01

    Google Glass has the potential to become a ubiquitous and translational technological tool within clinical plastic surgery. Google Glass allows clinicians to remotely view patient notes, laboratory results, and imaging; training can be augmented via streamed expert master classes; and patient safety can be improved by remote advice from a senior colleague. This systematic review identified and appraised every Google Glass publication relevant to plastic surgery and describes the first plastic surgical procedures recorded using Google Glass. A systematic review was performed using PubMed National Center for Biotechnology Information, Ovid MEDLINE, and the Cochrane Central Register of Controlled Trials, following modified Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. Key search terms "Google" and "Glass" identified mutually inclusive publications that were screened for inclusion. Eighty-two publications were identified, with 21 included for review. Google Glass publications were formal articles (n = 3), editorial/commentary articles (n = 7), conference proceedings (n = 1), news reports (n = 3), and online articles (n = 7). Data support Google Glass' positive impact on health care delivery, clinical training, medical documentation, and patient safety. Concerns exist regarding patient confidentiality, technical issues, and limited software. The first plastic surgical procedure performed using Google Glass was a blepharoplasty on October 29, 2013. Google Glass is an exciting translational technology with the potential to positively impact health care delivery, medical documentation, surgical training, and patient safety. Further high-quality scientific research is required to formally appraise Google Glass in the clinical setting.

  12. The effect of implementing cognitive load theory-based design principles in virtual reality simulation training of surgical skills: a randomized controlled trial.

    Science.gov (United States)

    Andersen, Steven Arild Wuyts; Mikkelsen, Peter Trier; Konge, Lars; Cayé-Thomasen, Per; Sørensen, Mads Sølvsten

    2016-01-01

    Cognitive overload can inhibit learning, and cognitive load theory-based instructional design principles can be used to optimize learning situations. This study aims to investigate the effect of implementing cognitive load theory-based design principles in virtual reality simulation training of mastoidectomy. Eighteen novice medical students received 1 h of self-directed virtual reality simulation training of the mastoidectomy procedure randomized for standard instructions (control) or cognitive load theory-based instructions with a worked example followed by a problem completion exercise (intervention). Participants then completed two post-training virtual procedures for assessment and comparison. Cognitive load during the post-training procedures was estimated by reaction time testing on an integrated secondary task. Final-product analysis by two blinded expert raters was used to assess the virtual mastoidectomy performances. Participants in the intervention group had a significantly increased cognitive load during the post-training procedures compared with the control group (52 vs. 41 %, p  = 0.02). This was also reflected in the final-product performance: the intervention group had a significantly lower final-product score than the control group (13.0 vs. 15.4, p  virtual reality surgical simulation training of novices.

  13. 6 CFR 25.6 - Procedures for designation of qualified anti-terrorism technologies.

    Science.gov (United States)

    2010-01-01

    ...-terrorism technologies. 25.6 Section 25.6 Domestic Security DEPARTMENT OF HOMELAND SECURITY, OFFICE OF THE SECRETARY REGULATIONS TO SUPPORT ANTI-TERRORISM BY FOSTERING EFFECTIVE TECHNOLOGIES § 25.6 Procedures for designation of qualified anti-terrorism technologies. (a) Application Procedure. Any person, firm or other...

  14. 40 CFR 63.8687 - What performance tests, design evaluations, and other procedures must I use?

    Science.gov (United States)

    2010-07-01

    ... evaluations, and other procedures must I use? 63.8687 Section 63.8687 Protection of Environment ENVIRONMENTAL... What performance tests, design evaluations, and other procedures must I use? (a) You must conduct each... run must last at least 1 hour. (e) You must use the following equations to determine compliance with...

  15. 40 CFR 63.7112 - What performance tests, design evaluations, and other procedures must I use?

    Science.gov (United States)

    2010-07-01

    ... evaluations, and other procedures must I use? 63.7112 Section 63.7112 Protection of Environment ENVIRONMENTAL..., design evaluations, and other procedures must I use? (a) You must conduct each performance test in Table... use wet dust suppression to control PM from PSH operations, a visible mist is sometimes generated by...

  16. State-of-the-practice : evaluation of sediment basin design, construction, maintenance, and inspection procedures.

    Science.gov (United States)

    2012-08-01

    The following document is the summary of results from a survey that was conducted to evaluate : the state-of-the-practice for sediment basin design, construction, maintenance, and inspection : procedures by State Highway Agencies (SHAs) across the na...

  17. Is Office-Based Surgery Safe? Comparing Outcomes of 183,914 Aesthetic Surgical Procedures Across Different Types of Accredited Facilities.

    Science.gov (United States)

    Gupta, Varun; Parikh, Rikesh; Nguyen, Lyly; Afshari, Ashkan; Shack, R Bruce; Grotting, James C; Higdon, K Kye

    2017-02-01

    There has been a dramatic rise in office-based surgery. However, due to wide variations in regulatory standards, the safety of office-based aesthetic surgery has been questioned. This study compares complication rates of cosmetic surgery performed at office-based surgical suites (OBSS) to ambulatory surgery centers (ASCs) and hospitals. A prospective cohort of patients undergoing cosmetic surgery between 2008 and 2013 were identified from the CosmetAssure database (Birmingham, AL). Patients were grouped by type of accredited facility where the surgery was performed: OBSS, ASC, or hospital. The primary outcome was the incidence of major complication(s) requiring emergency room visit, hospital admission, or reoperation within 30 days postoperatively. Potential risk factors including age, gender, body mass index (BMI), smoking, diabetes, type of procedure, and combined procedures were reviewed. Of the 129,007 patients (183,914 procedures) in the dataset, the majority underwent the procedure at ASCs (57.4%), followed by hospitals (26.7%) and OBSS (15.9%). Patients operated in OBSS were less likely to undergo combined procedures (30.3%) compared to ASCs (31.8%) and hospitals (35.3%, P procedures. Plastic surgeons should continue to triage their patients carefully based on other significant comorbidities that were not measured in this present study. LEVEL OF EVIDENCE 3. © 2016 The American Society for Aesthetic Plastic Surgery, Inc. Reprints and permission: journals.permissions@oup.com.

  18. Requirements for the design and implementation of checklists for surgical processes

    NARCIS (Netherlands)

    Verdaasdonk, E.G.G.; Stassen, L.P.S.; Widhiasmara, P.P.; Dankelman, J.

    2008-01-01

    Background- The use of checklists is a promising strategy for improving patient safety in all types of surgical processes inside and outside the operating room. This article aims to provide requirements and implementation of checklists for surgical processes. Methods- The literature on checklist use

  19. Variation in cancer surgical outcomes associated with physician and nurse staffing: a retrospective observational study using the Japanese Diagnosis Procedure Combination Database

    Directory of Open Access Journals (Sweden)

    Yasunaga Hideo

    2012-05-01

    Full Text Available Abstract Background Little is known about the effects of professional staffing on cancer surgical outcomes. The present study aimed to investigate the association between cancer surgical outcomes and physician/nurse staffing in relation to hospital volume. Methods We analyzed 131,394 patients undergoing lung lobectomy, esophagectomy, gastrectomy, colorectal surgery, hepatectomy or pancreatectomy for cancer between July and December, 2007–2008, using the Japanese Diagnosis Procedure Combination database linked to the Survey of Medical Institutions data. Physician-to-bed ratio (PBR and nurse-to-bed ratio (NBR were determined for each hospital. Hospital volume was categorized into low, medium and high for each of six cancer surgeries. Failure to rescue (FTR was defined as a proportion of inhospital deaths among those with postoperative complications. Multi-level logistic regression analysis was performed to examine the association between physician/nurse staffing and FTR, adjusting for patient characteristics and hospital volume. Results Overall inhospital mortality was 1.8%, postoperative complication rate was 15.2%, and FTR rate was 11.9%. After adjustment for hospital volume, FTR rate in the group with high PBR (≥19.7 physicians per 100 beds and high NBR (≥77.0 nurses per 100 beds was significantly lower than that in the group with low PBR ( Conclusions Well-staffed hospitals confer a benefit for cancer surgical patients regarding reduced FTR, irrespective of hospital volume. These results suggest that consolidation of surgical centers linked with migration of medical professionals may improve the quality of cancer surgical management.

  20. Design and Implementation of a Perioperative Surgical Home at a Veterans Affairs Hospital.

    Science.gov (United States)

    Walters, Tessa L; Howard, Steven K; Kou, Alex; Bertaccini, Edward J; Harrison, T Kyle; Kim, T Edward; Shafer, Audrey; Brun, Carlos; Funck, Natasha; Siegel, Lawrence C; Stary, Erica; Mariano, Edward R

    2016-06-01

    The innovative Perioperative Surgical Home model aims to optimize the outcomes of surgical patients by leveraging the expertise and leadership of physician anesthesiologists, but there is a paucity of practical examples to follow. Veterans Affairs health care, the largest integrated system in the United States, may be the ideal environment in which to explore this model. We present our experience implementing Perioperative Surgical Home at one tertiary care university-affiliated Veterans Affairs hospital. This process involved initiating consistent postoperative patient follow-up beyond the postanesthesia care unit, a focus on improving in-hospital acute pain management, creation of an accessible database to track outcomes, developing new clinical pathways, and recruiting additional staff. Today, our Perioperative Surgical Home facilitates communication between various services involved in the care of surgical patients, monitoring of patient outcomes, and continuous process improvement. © The Author(s) 2015.

  1. Did surgical failure and complications affect incontinence-related quality of life in women after transobturator sling procedure?

    Directory of Open Access Journals (Sweden)

    Wen-Chu Huang

    2018-04-01

    Full Text Available Objective: To report the objective outcome, subjective measurement of incontinence-related quality of life (QoL for female urodynamic stress incontinence (USI after transobturator sling surgery (TVT-O and to evaluate the effects of surgical failure and complications on QoL. Materials and methods: We analyzed the data from women who underwent TVT-O for USI and completed two validated QoL questionnaires, the Urogenital Distress Inventory (UDI-6 and Incontinence Impact Questionnaire (IIQ-7 preoperatively and at least 12 months postoperatively. We evaluated the subjective results of QoL questionnaires, objective results and compare the effect of QoL on those with surgical failure and complications after TVT-O surgery. Results: A total of 78 women were followed for a median of 13.5 months (range 12–15 months after surgery. Within this group, 75 (96% were considered subjectively cured or improved after TVT-O. There were significant improvements in the IIQ-7 and total UDI-6 scores postoperatively, as well as in the UDI-6 subscales for urge, stress and voiding dysfunction symptoms. Even the 18 women with objective urodynamic failure had significant improvement in QoL scores. For those with surgical related complications, the QoL scores were also significantly improved. Conclusions: TVT-O for USI resulted in improvement of incontinence-related QoL including urgency, stress, and voiding dysfunction symptoms. Surgical failure and complications didn't impair postoperative QoL. Keywords: Complication, Quality of life, Stress urinary incontinence, Transobturator tape, Urodynamic stress incontinence

  2. A unified approach to validation, reliability, and education study design for surgical technical skills training.

    Science.gov (United States)

    Sweet, Robert M; Hananel, David; Lawrenz, Frances

    2010-02-01

    To present modern educational psychology theory and apply these concepts to validity and reliability of surgical skills training and assessment. In a series of cross-disciplinary meetings, we applied a unified approach of behavioral science principles and theory to medical technical skills education given the recent advances in the theories in the field of behavioral psychology and statistics. While validation of the individual simulation tools is important, it is only one piece of a multimodal curriculum that in and of itself deserves examination and study. We propose concurrent validation throughout the design of simulation-based curriculum rather than once it is complete. We embrace the concept that validity and curriculum development are interdependent, ongoing processes that are never truly complete. Individual predictive, construct, content, and face validity aspects should not be considered separately but as interdependent and complementary toward an end application. Such an approach could help guide our acceptance and appropriate application of these exciting new training and assessment tools for technical skills training in medicine.

  3. Development of structural design procedure of plate-fin heat exchanger for HTGR

    Energy Technology Data Exchange (ETDEWEB)

    Mizokami, Yorikata, E-mail: yorikata_mizokami@mhi.co.jp [Mitsubishi Heavy Industries, Ltd., 1-1, Wadasaki-cho 1-Chome, Hyogo-ku, Kobe 652-8585 (Japan); Igari, Toshihide [Mitsubishi Heavy Industries, Ltd., 5-717-1, Fukahori-machi, Nagasaki 851-0392 (Japan); Kawashima, Fumiko [Kumamoto University, 39-1 Kurokami 2-Chome, Kumamoto 860-8555 (Japan); Sakakibara, Noriyuki [Mitsubishi Heavy Industries, Ltd., 5-717-1, Fukahori-machi, Nagasaki 851-0392 (Japan); Tanihira, Masanori [Mitsubishi Heavy Industries, Ltd., 16-5, Konan 2-Chome, Minato-ku, Tokyo 108-8215 (Japan); Yuhara, Tetsuo [The University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo 113-8656 (Japan); Hiroe, Tetsuyuki [Kumamoto University, 39-1 Kurokami 2-Chome, Kumamoto 860-8555 (Japan)

    2013-02-15

    Highlights: ► We propose high temperature structural design procedure for plate-fin heat exchanger ► Allowable stresses for brazed structures will be newly discussed ► Validity of design procedure is confirmed by carrying out partial model tests ► Proposed design procedure is applied to heat exchangers for HTGR. -- Abstract: Highly efficient plate-fin heat exchanger for application to HTGR has been focused on recently. Since this heat exchanger is fabricated by brazing a lot of plates and fins, a new procedure for structural design of brazed structures in the HTGR temperature region up to 950 °C is required. Firstly in this paper influences on material strength due to both thermal aging during brazing process and helium gas environment were experimentally examined, and failure mode and failure limit of brazed side-bar structures were experimentally clarified. Secondly allowable stresses for aging materials and brazed structures were newly determined on the basis of the experimental results. For the purpose of validating the structural design procedure including homogenization FEM modeling, a pressure burst test and a thermal fatigue test of partial model for plate-fin heat exchanger were carried out. Finally, results of reference design of plate-fin heat exchangers of recuperator and intermediate heat exchanger for HTGR plant were evaluated by the proposed design criteria.

  4. Design of test and emergency procedures to improve operator behaviour in French nuclear power plants

    International Nuclear Information System (INIS)

    Griffon-Fouco, M.; Gomolinski, M.

    1982-09-01

    The incident analyses performed in French nuclear power plants high-lighted that deficiencies in the design of procedures are frequent causes of human errors. The process for developing new guidelines for the writing of test and emergency procedures is presented: this process is based on operators interviews and observations at the plants or at simulators. The main principles for the writing of procedures are developed. For example: - the elaboration of a procedure for action and of a separate educational procedure, - the coordination of crew responses, - the choice of vocabulary, graphs, flow charts and so on as regards the format. Other complementary actions, such as the training of operators in the use of procedures, are described

  5. Design of test and emergency procedures to improve operator behavior in French nuclear power plants

    International Nuclear Information System (INIS)

    Griffon-Fouco, M.; Gomolinski, M.

    1983-01-01

    The incident analyses performed in French nuclear power plants high-lighted that deficiencies in the design of procedures are frequent causes of human errors. The process for developing new guidelines for the writing of test and emergency procedures is presented: this process is based on operators interviews and observations at the plants or at simulators. The main principles for the writing of procedures are developed. For example: the elaboration of a procedure for action and of separate educational procedure; the coordination of crew responses; and the choice of vocabulary, graphs, flow charts and so on as regards the format. Other complementary actions, such as the training of operators in the use of procedures, are described

  6. Controller tuning with evolutionary multiobjective optimization a holistic multiobjective optimization design procedure

    CERN Document Server

    Reynoso Meza, Gilberto; Sanchis Saez, Javier; Herrero Durá, Juan Manuel

    2017-01-01

    This book is devoted to Multiobjective Optimization Design (MOOD) procedures for controller tuning applications, by means of Evolutionary Multiobjective Optimization (EMO). It presents developments in tools, procedures and guidelines to facilitate this process, covering the three fundamental steps in the procedure: problem definition, optimization and decision-making. The book is divided into four parts. The first part, Fundamentals, focuses on the necessary theoretical background and provides specific tools for practitioners. The second part, Basics, examines a range of basic examples regarding the MOOD procedure for controller tuning, while the third part, Benchmarking, demonstrates how the MOOD procedure can be employed in several control engineering problems. The fourth part, Applications, is dedicated to implementing the MOOD procedure for controller tuning in real processes.

  7. Abortion - surgical - aftercare

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/patientinstructions/000658.htm Abortion - surgical - aftercare To use the sharing features on ... please enable JavaScript. You have had a surgical abortion. This is a procedure that ends pregnancy by ...

  8. Urogynecologic Surgical Mesh Implants

    Science.gov (United States)

    ... procedures performed to treat pelvic floor disorders with surgical mesh: Transvaginal mesh to treat POP Transabdominal mesh to treat ... address safety risks Final Order for Reclassification of Surgical Mesh for Transvaginal Pelvic Organ Prolapse Repair Final Order for Effective ...

  9. A task based design procedure and modelling approached for industrial crystallization processes

    NARCIS (Netherlands)

    Menon, A.R.

    2006-01-01

    A synthesis-based approach to the design of crystallizers and industrial crystallization processes is introduced in this thesis. An ontology for a task-based design procedure has been developed which breaks the crystallization process into a subset of basic functions (physical tasks) which transform

  10. Combined HLA matched limbal stem cells allograft with amniotic membrane transplantation as a prophylactic surgical procedure to prevent corneal graft rejection after penetrating keratoplasty: case report

    Directory of Open Access Journals (Sweden)

    Paolo Capozzi

    2014-09-01

    Full Text Available Purpose. To determine if the use of combined HLA matched limbal stem cells allograft with amniotic membrane transplantation (AMT is a safe and effective prophylactic surgical procedure to prevent corneal graft after penetrating keratoplasty (PK. Methods. We report the case of a 17 years old patient with a history of congenital glaucoma, trabeculectomy and multiple corneal graft rejections, presenting total limbal cell deficiency. To reduce the possibility of graft rejection in the left eye after a new PK, a two step procedure was performed. At first the patient underwent a combined HLA matched limbal stem cells allograft (LAT and AMT and then, 10 months later, a new PK. Results. During 12 months of follow-up, the corneal graft remained stable and smooth, with no sign of graft rejection. Conclusions. In our patient, the prophylactic use of LAT from HLA-matched donors and AMT before PK, may result in a better prognosis of corneal graft survival.

  11. Conservative two-step procedure including uterine artery embolization with embosphere and surgical myomectomy for the treatment of multiple fibroids: Preliminary experience

    International Nuclear Information System (INIS)

    Malartic, Cécile; Morel, Olivier; Fargeaudou, Yann; Le Dref, Olivier; Fazel, Afchine; Barranger, Emmanuel; Soyer, Philippe

    2012-01-01

    Objective: To evaluate the feasibility and safety of combined uterine artery embolization (UAE) using embosphere and surgical myomectomy as an alternative to radical hysterectomy in premenopausal women with multiple fibroids. Materials and methods: Mid-term clinical outcome (mean, 25 months) of 12 premenopausal women (mean age, 38 years) with multiple and large symptomatic fibroids who desired to retain their uterus and who were treated using combined UAE and surgical myomectomy were retrospectively analyzed. In all women, UAE alone was contraindicated because of large (>10 cm) or subserosal or submucosal fibroids and myomectomy alone was contraindicated because of too many (>10) fibroids. Results: UAE and surgical myomectomy were successfully performed in all women. Myomectomy was performed using laparoscopy (n = 6), open laparotomy (n = 3), hysteroscopy (n = 2), or laparoscopy and hysteroscopy (n = 1). Mean serum hemoglobin level drop was 0.97 g/dL and no blood transfusion was needed. No immediate complications were observed and all women reported resumption of normal menses. During a mean follow-up period of 25 months (range, 14–37 months), complete resolution of initial symptoms along with decrease in uterine volume (mean, 48%) was observed in all women. No further hysterectomy was required in any woman. Conclusion: In premenopausal women with multiple fibroids, the two-step procedure is safe and effective alternative to radical hysterectomy, which allows preserving the uterus. Further prospective studies, however, should be done to determine the actual benefit of this combined approach on the incidence of subsequent pregnancies.

  12. A case study on the design of a modular surgical instrument for removing metastases using engineering design tools

    OpenAIRE

    Preca, George; Farrugia, Philip; Casha, Aaron; International Conference on Engineering and Product Design Education

    2014-01-01

    Metastatic cancer is a form of cancer stemming from a primary tumour that propagates to different organs and/or to different sites within the same organ. Studies have indicated that the chances of survival improve upon surgical removal of metastases. The overall goal of this research was to develop a modular surgical instrument that would be easy to use and manipulate and hence facilitate resection of metastases. This research forms part of a final year project carried out by a mechanical eng...

  13. Heterogeneity among hospitals statewide in percentage shares of the annual growth of surgical caseloads of inpatient and outpatient major therapeutic procedures.

    Science.gov (United States)

    Dexter, Franklin; Jarvie, Craig; Epstein, Richard H

    2018-04-18

    Suppose that it were a generalizable finding, in both densely populated and rural states, that there is marked heterogeneity among hospitals in the percentage change in surgical caseload and/or in the total change in caseload. Then, individual hospitals should not simply rely on federal and state forecasts to infer their expected growth. Likewise, individual hospitals and their anesthesiology groups would best not rely on national or US regional surgical trends as causal reasons for local trends in caseload. We examined the potential utility of using state data on surgical caseload to predict local growth by using 6 years of data for surgical cases performed at hospitals in the States of Florida and Iowa. Observational cohort study. 303 hospitals in Iowa and Florida. Cases with major therapeutic procedures in 2010 or 2011 were compared pairwise by hospital with such cases in 2015 and 2016. Changes in counts of cases were decreases or increases, while study of growth set decreases equal to zero. Hospitals in Iowa had slightly lesser percentage changes than did hospitals in Florida (Mann-Whitney P = 0.016). Hospitals in Iowa had greater variability among hospitals in the change in counts of cases with a major therapeutic procedure than did hospitals in Florida (P < 0.0001). The 10% of hospitals with the largest growths in counts of cases accounted for approximately half of the total growth in Iowa (70%) and Florida (54%). The large share of total growth attributable to the upper 10th percentile of hospitals was not caused solely by the hospitals having large percentage growths, based on there being weak correlation between growth and percentage growth, among the hospitals that grew (Iowa: Kendall's tau = 0.286 [SE 0.120]; Florida tau = 0.253 [SE 0.064]). Even if the data from states or federal agencies reported growth in surgical cases, there is too much concentration of growth at a few hospitals for statewide growth rates to be useful for

  14. Intravenous infusion of ketamine-propofol can be an alternative to intravenous infusion of fentanyl-propofol for deep sedation and analgesia in paediatric patients undergoing emergency short surgical procedures

    Directory of Open Access Journals (Sweden)

    Samit Kumar Khutia

    2012-01-01

    Full Text Available Background: Paediatric patients often present with different painful conditions that require immediate surgical interventions. Despite a plethora of articles on the ketamine-propofol combination, comprehensive evidence regarding the suitable sedoanalgesia regime is lacking due to heterogeneity in study designs. Methods: This prospective, randomized, double-blind, active-controlled trial was conducted in 100 children, of age 3-14 years, American Society of Anesthesiologist physical status IE-IIE, posted for emergency short surgical procedures. Patients were randomly allocated to receive either 2 mL of normal saline (pre-induction plus calculated volume of drug from the 11 mL of ketamine-propofol solution for induction (group PK, n=50 or fentanyl 1.5 μg/kg diluted to 2 mL with normal saline (pre-induction plus calculated volume of drug from the 11 mL of propofol solution for induction (group PF, n=50. In both the groups, the initial bolus propofol 1 mg/kg i.v. (assuming the syringes contained only propofol, for simplicity was followed by adjusted infusion to achieve a Ramsay Sedation Scale score of six. Mean arterial pressure (MAP was the primary outcome measurement. Results: Data from 48 patients in group PK and 44 patients in group PF were available for analysis. Hypotension was found in seven patients (14.6% in group PK compared with 17 (38.6% patients in group PF (P=0.009. Intraoperative MAP was significantly lower in group PF than group PK when compared with baseline. Conclusion: The combination of low-dose ketamine and propofol is more effective and a safer sedoanalgesia regimen than the propofol-fentanyl combination in paediatric emergency short surgical procedures in terms of haemodynamic stability and lesser incidence of apnoea.

  15. Micro-surgical endodontics.

    Science.gov (United States)

    Eliyas, S; Vere, J; Ali, Z; Harris, I

    2014-02-01

    Non-surgical endodontic retreatment is the treatment of choice for endodontically treated teeth with recurrent or residual disease in the majority of cases. In some cases, surgical endodontic treatment is indicated. Successful micro-surgical endodontic treatment depends on the accuracy of diagnosis, appropriate case selection, the quality of the surgical skills, and the application of the most appropriate haemostatic agents and biomaterials. This article describes the armamentarium and technical procedures involved in performing micro-surgical endodontics to a high standard.

  16. Recombinant Activated Factor VII (Eptacog Alfa Activated, NovoSeven®) in Patients with Rare Congenital Bleeding Disorders. A Systematic Review on its Use in Surgical Procedures.

    Science.gov (United States)

    Di Minno, Matteo Nicola Dario; Ambrosino, Pasquale; Myasoedova, Veronika; Amato, Manuela; Ventre, Itala; Tremoli, Elena; Minno, Alessandro Di

    2017-01-01

    In the absence of definite guidelines in the area, we have carried a systemic review to provide a thorough overview concerning the efficacy and safety of recombinant activated factor VII (rFVIIa, NovoSeven®, Novo Nordisk A/S, Bagsværd, Denmark) in patients with Glanzmann's thrombasthenia (GT) and FVII deficiency, undergoing surgical procedures. PubMed, Web of Science, Scopus and EMBASE databases was employed for the search. Three multicenter registries were identified: the Glanzmann's Thrombasthenia Registry (GTR), the Seven Treatment Evaluation Registry (STER), and a German post-marketing surveillance registry (the WIRK study). In addition, data from 10 case-series and/or single-center experiences have been summarized. We have found that the following; perioperatively, the hemostatic effectiveness of rFVIIa was high in GT patients and in those with FVII deficiency undergoing both minor and major surgical procedures. Moreover, in all studies, rFVIIa was well tolerated. Thus, the current evidence shows an optimal perioperative safety/efficacy profile of rFVIIa in the setting of these rare bleeding disorders, and provides the rationale for further studies aimed at evaluating the optimal perioperative anti-hemorrhagic prophylaxis with rFVIIa in GT and in FVII deficient patients. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  17. COMPARISON OF GLYCEMIC EFFECT OF ADRENALIN CONTAINING LOCAL ANESTHETIC IN DIABETIC AND NON-DIABETIC PATIENTS UNDERGOING MINOR ORAL SURGICAL PROCEDURE

    Directory of Open Access Journals (Sweden)

    Pradeep

    2015-12-01

    Full Text Available AIM To compare the changes in blood glucose level associated with administration of adrenaline containing local anesthetic in diabetic and non-diabetic patients undergoing minor oral surgical procedures. METHODS AND MATERIAL The study included 150 well controlled diabetic patients and 150 non-diabetic healthy patients in age group of 40-60 years who underwent minor oral surgical procedures (trans alveolar extractions, alveoplasty and flap surgeries. Patients in both the group were administered 1.8ml of local anesthetic agent containing 1:100,000 adrenaline for inferior alveolar nerve block and 0.2 ml of anesthetic agent for long buccal nerve block. Blood glucose levels were assessed and compared during pre-operative and one hour post-operative period. STATISTICAL ANALYSIS The comparison of the random blood sugar levels preop and postop in both the groups were compared using paired t test and RBS levels between two groups were analysed using unpaired t test. P value less than 0.05 was considered statistically significant. RESULTS No statistically significant change in post-operative blood glucose level was noted between the diabetic and non-diabetic patients. CONCLUSION The study concluded that it is safe to administer local anesthetic containing 1:100,000 adrenaline in smaller volumes to well controlled diabetic patients.

  18. Procedure and information displays in advanced nuclear control rooms: experimental evaluation of an integrated design.

    Science.gov (United States)

    Chen, Yue; Gao, Qin; Song, Fei; Li, Zhizhong; Wang, Yufan

    2017-08-01

    In the main control rooms of nuclear power plants, operators frequently have to switch between procedure displays and system information displays. In this study, we proposed an operation-unit-based integrated design, which combines the two displays to facilitate the synthesis of information. We grouped actions that complete a single goal into operation units and showed these operation units on the displays of system states. In addition, we used different levels of visual salience to highlight the current unit and provided a list of execution history records. A laboratory experiment, with 42 students performing a simulated procedure to deal with unexpected high pressuriser level, was conducted to compare this design against an action-based integrated design and the existing separated-displays design. The results indicate that our operation-unit-based integrated design yields the best performance in terms of time and completion rate and helped more participants to detect unexpected system failures. Practitioner Summary: In current nuclear control rooms, operators frequently have to switch between procedure and system information displays. We developed an integrated design that incorporates procedure information into system displays. A laboratory study showed that the proposed design significantly improved participants' performance and increased the probability of detecting unexpected system failures.

  19. SUPPORTING THE INDUSTRY BY DEVELOPING A DESIGN GUIDANCE FOR COMPUTER-BASED PROCEDURES FOR FIELD WORKERS

    Energy Technology Data Exchange (ETDEWEB)

    Oxstrand, Johanna; LeBlanc, Katya

    2017-06-01

    The paper-based procedures currently used for nearly all activities in the commercial nuclear power industry have a long history of ensuring safe operation of the plants. However, there is potential to greatly increase efficiency and safety by improving how the human interacts with the procedures, which can be achieved through the use of computer-based procedures (CBPs). A CBP system offers a vast variety of improvements, such as context driven job aids, integrated human performance tools and dynamic step presentation. As a step toward the goal of improving procedure use performance, the U.S. Department of Energy Light Water Reactor Sustainability Program researchers, together with the nuclear industry, have been investigating the possibility and feasibility of replacing current paper-based procedures with CBPs. The main purpose of the CBP research conducted at the Idaho National Laboratory was to provide design guidance to the nuclear industry to be used by both utilities and vendors. After studying existing design guidance for CBP systems, the researchers concluded that the majority of the existing guidance is intended for control room CBP systems, and does not necessarily address the challenges of designing CBP systems for instructions carried out in the field. Further, the guidance is often presented on a high level, which leaves the designer to interpret what is meant by the guidance and how to specifically implement it. The authors developed a design guidance to provide guidance specifically tailored to instructions that are carried out in the field based.

  20. A procedure for multi-objective optimization of tire design parameters

    OpenAIRE

    Nikola Korunović; Miloš Madić; Miroslav Trajanović; Miroslav Radovanović

    2015-01-01

    The identification of optimal tire design parameters for satisfying different requirements, i.e. tire performance characteristics, plays an essential role in tire design. In order to improve tire performance characteristics, formulation and solving of multi-objective optimization problem must be performed. This paper presents a multi-objective optimization procedure for determination of optimal tire design parameters for simultaneous minimization of strain energy density at two distinctive zo...

  1. Review: Janice M. Morse & Linda Niehaus (2009). Mixed method design: principles and procedures

    OpenAIRE

    Öhlen, Joakim

    2010-01-01

    Mixed-Method-Designs, in denen quantitative und qualitative Methoden Verwendung finden, erfreuen sich zunehmender Beliebtheit für die Untersuchung komplexer Phänomene. Die vorliegende Besprechung beschäftigt sich in diesem Zusammenhang mit dem Buch "Mixed Method Design: Principles and Procedures" von Janice M. MORSE und Linda NIEHAUS, die für solche Designs Kern- und Ergänzungskomponenten zu identifizieren versuchen. Hierzu differenzieren sie zwischen Projekten, die einer eher deduktiven oder...

  2. Review: Janice M. Morse & Linda Niehaus (2009). Mixed Method Design: Principles and Procedures

    OpenAIRE

    Öhlen, Joakim

    2010-01-01

    Mixed method design related to the use of a combination of methods, usually quantitative and qualitative, is increasingly used for the investigation of complex phenomena. This review discusses the book, "Mixed Method Design: Principles and Procedures," by Janice M. MORSE and Linda NIEHAUS. A distinctive feature of their approach is the consideration of mixed methods design out of a core and a supplemental component. In order to define these components they emphasize the overall conceptual dir...

  3. The TOMAX-procedure

    NARCIS (Netherlands)

    Overgoor, M.L.E.

    2015-01-01

    Most patients with a low spinal lesion (LSL) have intact erectile function but no penile sensation, which can lead to frustration. To tackle this problem, we designed TOMAX, TOMAXimize sensation, sexuality and quality of life, a surgical procedure in which a functional "groin” nerve is connected to

  4. Loop Ileostomy Closure as an Overnight Procedure: Institutional Comparison With the National Surgical Quality Improvement Project Data Set.

    Science.gov (United States)

    Berger, Nicholas G; Chou, Raymond; Toy, Elliot S; Ludwig, Kirk A; Ridolfi, Timothy J; Peterson, Carrie Y

    2017-08-01

    Enhanced recovery pathways have decreased length of stay after colorectal surgery. Loop ileostomy closure remains a challenge, because patients experience high readmission rates, and validation of enhanced recovery pathways has not been demonstrated. This study examined a protocol whereby patients were discharged on the first postoperative day and instructed to advance their diet at home with close telephone follow-up. The hypothesis was that patients can be safely discharged the day after loop closure, leading to shorter length of stay without increased rates of readmission or complications. Patients undergoing loop ileostomy closure were queried from the American College of Surgeons National Surgical Quality Improvement Project and compared with a single institution (2012-2015). Length of stay, 30-day readmission, and 30-day morbidity data were analyzed. The study was conducted at a tertiary university department. The study includes 1602 patients: 1517 from the National Surgical Quality Improvement Project database and 85 from a single institution. Length of stay and readmission rates were measured. Median length of stay was less at the single institution compared with control (2 vs 4 d; p < 0.001). Thirty-day readmission (15.3% vs 10.4%; p = 0.15) and overall 30-day complications (15.3% vs 16.7%; p = 0.73) were similar between cohorts. Estimated adjusted length of stay was less in the single institution (2.93 vs 5.58 d; p < 0.0001). There was no difference in the odds of readmission (p = 0.22). The main limitations of this study include its retrospective nature and limitations of the National Surgical Quality Improvement Program database. Next-day discharge with protocoled diet advancement and telephone follow-up is acceptable after loop ileostomy closure. Patients can benefit from decreased length of stay without an increase in readmission or complications. This has the potential to change the practice of postoperative management of loop ileostomy closure, as

  5. Investigation of the Performance of Multidimensional Equating Procedures for Common-Item Nonequivalent Groups Design

    Directory of Open Access Journals (Sweden)

    Burcu ATAR

    2017-12-01

    Full Text Available In this study, the performance of the multidimensional extentions of Stocking-Lord, mean/mean, and mean/sigma equating procedures under common-item nonequivalent groups design was investigated. The performance of those three equating procedures was examined under the combination of various conditions including sample size, ability distribution, correlation between two dimensions, and percentage of anchor items in the test. Item parameter recovery was evaluated calculating RMSE (root man squared error and BIAS values. It was found that Stocking-Lord procedure provided the smaller RMSE and BIAS values for both item discrimination and item difficulty parameter estimates across most conditions.

  6. Successful correction of tibial bone deformity through multiple surgical procedures, liquid nitrogen-pretreated bone tumor autograft, three-dimensional external fixation, and internal fixation in a patient with primary osteosarcoma: a case report.

    Science.gov (United States)

    Takeuchi, Akihiko; Yamamoto, Norio; Shirai, Toshiharu; Nishida, Hideji; Hayashi, Katsuhiro; Watanabe, Koji; Miwa, Shinji; Tsuchiya, Hiroyuki

    2015-12-07

    In a previous report, we described a method of reconstruction using tumor-bearing autograft treated by liquid nitrogen for malignant bone tumor. Here we present the first case of bone deformity correction following a tumor-bearing frozen autograft via three-dimensional computerized reconstruction after multiple surgeries. A 16-year-old female student presented with pain in the left lower leg and was diagnosed with a low-grade central tibial osteosarcoma. Surgical bone reconstruction was performed using a tumor-bearing frozen autograft. Bone union was achieved at 7 months after the first surgical procedure. However, local tumor recurrence and lung metastases occurred 2 years later, at which time a second surgical procedure was performed. Five years later, the patient developed a 19° varus deformity and underwent a third surgical procedure, during which an osteotomy was performed using the Taylor Spatial Frame three-dimensional external fixation technique. A fourth corrective surgical procedure was performed in which internal fixation was achieved with a locking plate. Two years later, and 10 years after the initial diagnosis of tibial osteosarcoma, the bone deformity was completely corrected, and the patient's limb function was good. We present the first report in which a bone deformity due to a primary osteosarcoma was corrected using a tumor-bearing frozen autograft, followed by multiple corrective surgical procedures that included osteotomy, three-dimensional external fixation, and internal fixation.

  7. Comparing Outcomes and Cost of 3 Surgical Treatments for Sagittal Synostosis: A Retrospective Study Including Procedure-Related Cost Analysis.

    Science.gov (United States)

    Garber, Sarah T; Karsy, Michael; Kestle, John R W; Siddiqi, Faizi; Spanos, Stephen P; Riva-Cambrin, Jay

    2017-10-01

    Neurosurgical techniques for repair of sagittal synostosis include total cranial vault (TCV) reconstruction, open sagittal strip (OSS) craniectomy, and endoscopic strip (ES) craniectomy. To evaluate outcomes and cost associated with these 3 techniques. Via retrospective chart review with waiver of informed consent, the last consecutive 100 patients with sagittal synostosis who underwent each of the 3 surgical correction techniques before June 30, 2013, were identified. Clinical, operative, and process of care variables and their associated specific charges were analyzed along with overall charge. The study included 300 total patients. ES patients had fewer transfusion requirements (13% vs 83%, P cost savings compared with the TCV reconstruction. The charges were similar to those incurred with OSS craniectomy, but patients had a shorter length of stay and fewer revisions. Copyright © 2017 by the Congress of Neurological Surgeons

  8. Risk factors for unplanned readmission within 30 days after pediatric neurosurgery: a nationwide analysis of 9799 procedures from the American College of Surgeons National Surgical Quality Improvement Program

    Science.gov (United States)

    Sherrod, Brandon A.; Johnston, James M.; Rocque, Brandon G.

    2017-01-01

    Objective Readmission rate is increasingly used as a quality outcome measure after surgery. The purpose of this study was to establish, using a national database, the baseline readmission rates and risk factors for readmission after pediatric neurosurgical procedures. Methods The American College of Surgeons National Surgical Quality Improvement Program–Pediatric database was queried for pediatric patients treated by a neurosurgeon from 2012 to 2013. Procedures were categorized by current procedural terminology code. Patient demographics, comorbidities, preoperative laboratory values, operative variables, and postoperative complications were analyzed via univariate and multivariate techniques to find associations with unplanned readmission within 30 days of the primary procedure. Results A total of 9799 cases met the inclusion criteria, 1098 (11.2%) of which had an unplanned readmission within 30 days. Readmission occurred 14.0 ± 7.7 days postoperatively (mean ± standard deviation). The 4 procedures with the highest unplanned readmission rates were CSF shunt revision (17.3%), repair of myelomeningocele > 5 cm in diameter (15.4%), CSF shunt creation (14.1%), and craniectomy for infratentorial tumor excision (13.9%). Spine (6.5%), craniotomy for craniosynostosis (2.1%), and skin lesion (1.0%) procedures had the lowest unplanned readmission rates. On multivariate regression analysis, the odds of readmission were greatest in patients experiencing postoperative surgical site infection (SSI; deep, organ/space, superficial SSI and wound disruption: OR > 12 and p readmission risk. Independent patient risk factors for unplanned readmission included Native American race (OR 2.363, p = 0.019), steroid use > 10 days (OR 1.411, p = 0.010), oxygen supplementation (OR 1.645, p = 0.010), nutritional support (OR 1.403, p = 0.009), seizure disorder (OR 1.250, p = 0.021), and longer operative time (per hour increase, OR 1.059, p = 0.014). Conclusions This study may aid in

  9. Risk factors for unplanned readmission within 30 days after pediatric neurosurgery: a nationwide analysis of 9799 procedures from the American College of Surgeons National Surgical Quality Improvement Program.

    Science.gov (United States)

    Sherrod, Brandon A; Johnston, James M; Rocque, Brandon G

    2016-09-01

    OBJECTIVE Hospital readmission rate is increasingly used as a quality outcome measure after surgery. The purpose of this study was to establish, using a national database, the baseline readmission rates and risk factors for patient readmission after pediatric neurosurgical procedures. METHODS The American College of Surgeons National Surgical Quality Improvement Program-Pediatric database was queried for pediatric patients treated by a neurosurgeon between 2012 and 2013. Procedures were categorized by current procedural terminology (CPT) code. Patient demographics, comorbidities, preoperative laboratory values, operative variables, and postoperative complications were analyzed via univariate and multivariate techniques to find associations with unplanned readmissions within 30 days of the primary procedure. RESULTS A total of 9799 cases met the inclusion criteria, 1098 (11.2%) of which had an unplanned readmission within 30 days. Readmission occurred 14.0 ± 7.7 days postoperatively (mean ± standard deviation). The 4 procedures with the highest unplanned readmission rates were CSF shunt revision (17.3%; CPT codes 62225 and 62230), repair of myelomeningocele > 5 cm in diameter (15.4%), CSF shunt creation (14.1%), and craniectomy for infratentorial tumor excision (13.9%). The lowest unplanned readmission rates were for spine (6.5%), craniotomy for craniosynostosis (2.1%), and skin lesion (1.0%) procedures. On multivariate regression analysis, the odds of readmission were greatest in patients experiencing postoperative surgical site infection (SSI; deep, organ/space, superficial SSI, and wound disruption: OR > 12 and p 10 days (OR 1.411, p = 0.010), oxygen supplementation (OR 1.645, p = 0.010), nutritional support (OR 1.403, p = 0.009), seizure disorder (OR 1.250, p = 0.021), and longer operative time (per hour increase, OR 1.059, p = 0.029). CONCLUSIONS This study may aid in identifying patients at risk for unplanned readmission following pediatric neurosurgery

  10. SAGES TAVAC safety and effectiveness analysis: da Vinci ® Surgical System (Intuitive Surgical, Sunnyvale, CA).

    Science.gov (United States)

    Tsuda, Shawn; Oleynikov, Dmitry; Gould, Jon; Azagury, Dan; Sandler, Bryan; Hutter, Matthew; Ross, Sharona; Haas, Eric; Brody, Fred; Satava, Richard

    2015-10-01

    The da Vinci(®) Surgical System (Intuitive Surgical, Sunnyvale, CA, USA) is a computer-assisted (robotic) surgical system designed to enable and enhance minimally invasive surgery. The Food and Drug Administration (FDA) has cleared computer-assisted surgical systems for use by trained physicians in an operating room environment for laparoscopic surgical procedures in general, cardiac, colorectal, gynecologic, head and neck, thoracic and urologic surgical procedures. There are substantial numbers of peer-reviewed papers regarding the da Vinci(®) Surgical System, and a thoughtful assessment of evidence framed by clinical opinion is warranted. The SAGES da Vinci(®) TAVAC sub-committee performed a literature review of the da Vinci(®) Surgical System regarding gastrointestinal surgery. Conclusions by the sub-committee were vetted by the SAGES TAVAC Committee and SAGES Executive Board. Following revisions, the document was evaluated by the TAVAC Committee and Executive Board again for final approval. Several conclusions were drawn based on expert opinion organized by safety, efficacy, and cost for robotic foregut, bariatric, hepatobiliary/pancreatic, colorectal surgery, and single-incision cholecystectomy. Gastrointestinal surgery with the da Vinci(®) Surgical System is safe and comparable, but not superior to standard laparoscopic approaches. Although clinically acceptable, its use may be costly for select gastrointestinal procedures. Current data are limited to the da Vinci(®) Surgical System; further analyses are needed.

  11. DECA -- The design change assistant: An application of expert systems concepts to procedure automation

    International Nuclear Information System (INIS)

    Brtis, J.S.

    1993-01-01

    Proceduralized engineering reviews required for nuclear power stations result in significant O ampersand M cost's. A method of streamlining procedural reviews (while improving their quality) is to computerize the procedures and associated checklists. DECA, the Design Change Assistant, is an expert system based program that is specifically designed for computerizing procedures. This program improves the effectiveness of engineers in performing engineering design reviews. DECA is a development shell, which allows the computerization of most types of engineering reviews. In addition to computerizing the decision making process, DECA makes it possible to call on electronic information, such as databases or text files, and makes them available to the user to assist in a review. DECA clearly demonstrates the benefits that can accrue by applying expert system technologies to engineering reviews. It results in the following: a well defined process, reduced user training in the use of procedures, improved quality of reviews, a streamlining of the review process through elimination of questions that are not applicable, and high quality documentation of reviews. DECA has been successfully applied to Commonwealth Edison's engineering design review checklists, and is currently in use by Commonwealth Edison

  12. A procedure for multi-objective optimization of tire design parameters

    Directory of Open Access Journals (Sweden)

    Nikola Korunović

    2015-04-01

    Full Text Available The identification of optimal tire design parameters for satisfying different requirements, i.e. tire performance characteristics, plays an essential role in tire design. In order to improve tire performance characteristics, formulation and solving of multi-objective optimization problem must be performed. This paper presents a multi-objective optimization procedure for determination of optimal tire design parameters for simultaneous minimization of strain energy density at two distinctive zones inside the tire. It consists of four main stages: pre-analysis, design of experiment, mathematical modeling and multi-objective optimization. Advantage of the proposed procedure is reflected in the fact that multi-objective optimization is based on the Pareto concept, which enables design engineers to obtain a complete set of optimization solutions and choose a suitable tire design. Furthermore, modeling of the relationships between tire design parameters and objective functions based on multiple regression analysis minimizes computational and modeling effort. The adequacy of the proposed tire design multi-objective optimization procedure has been validated by performing experimental trials based on finite element method.

  13. Design and drafting document control procedures for CPRF/ZTH experiment

    International Nuclear Information System (INIS)

    Pollat, L.L.; Kewish, R.W.

    1989-01-01

    This paper will present, in general, the control procedures for design approval, review, changes, and release of engineering documents. It will also discuss interface control for tasks so that possible design interference does not occur. A document control procedure to insure that design criteria are met and technical specifications translate into workable drawings was instituted to support the Confinement Physics Research Facility (CPRF/ZTH) construction program. Our goal, to eliminate any conflicts that might arise between various tasks as the final designs are developed, required tight control and up-to-date design information. Detailed procedure for reviews were instituted, since circumventing the process of design and drafting anywhere might have proven disastrous to the CPRF/ZTH program. Design is a process of translating technical requirements, according to established standards, into drawings that are usable for fabrication and assembly. Both the designer and engineer are responsible for adhering to standards that have been established by the Mechanical Engineering Section for the CPRF/ZTH program. 6 refs., 5 figs

  14. Technical procedures for template-guided surgery for mandibular reconstruction based on digital design and manufacturing.

    Science.gov (United States)

    Liu, Yun-feng; Xu, Liang-wei; Zhu, Hui-yong; Liu, Sean Shih-Yao

    2014-05-23

    The occurrence of mandibular defects caused by tumors has been continuously increasing in China in recent years. Conversely, results of the repair of mandibular defects affect the recovery of oral function and patient appearance, and the requirements for accuracy and high surgical quality must be more stringent. Digital techniques--including model reconstruction based on medical images, computer-aided design, and additive manufacturing--have been widely used in modern medicine to improve the accuracy and quality of diagnosis and surgery. However, some special software platforms and services from international companies are not always available for most of researchers and surgeons because they are expensive and time-consuming. Here, a new technical solution for guided surgery for the repair of mandibular defects is proposed, based on general popular tools in medical image processing, 3D (3 dimension) model reconstruction, digital design, and fabrication via 3D printing. First, CT (computerized tomography) images are processed to reconstruct the 3D model of the mandible and fibular bone. The defect area is then replaced by healthy contralateral bone to create the repair model. With the repair model as reference, the graft shape and cutline are designed on fibular bone, as is the guide for cutting and shaping. The physical model, fabricated via 3D printing, including surgical guide, the original model, and the repair model, can be used to preform a titanium locking plate, as well as to design and verify the surgical plan and guide. In clinics, surgeons can operate with the help of the surgical guide and preformed plate to realize the predesigned surgical plan. With sufficient communication between engineers and surgeons, an optimal surgical plan can be designed via some common software platforms but needs to be translated to the clinic. Based on customized models and tools, including three surgical guides, preformed titanium plate for fixation, and physical models of

  15. Rules and procedures for the design and operation of hazardous research equipment

    International Nuclear Information System (INIS)

    1978-12-01

    The manual has been prepared for use by research personnel involved in experiments at the Lawrence Berkeley Laboratory. It contains rules and procedures for the design, test, installation, and operation of hazardous research equipment. Sect. I contains such information as responsibility of experimenters for safety, descriptions of the various Laboratory safety organizations, and enumeration of various services available to experimenters at the Laboratory. Sect. II describes specific rules for the setup and operation of experimental equipment at the Laboratory. Sect. III gives detailed design criteria and procedures for equipment frequently encountered in the high energy physics laboratory

  16. Power analysis for multivariate and repeated measures designs: a flexible approach using the SPSS MANOVA procedure.

    Science.gov (United States)

    D'Amico, E J; Neilands, T B; Zambarano, R

    2001-11-01

    Although power analysis is an important component in the planning and implementation of research designs, it is often ignored. Computer programs for performing power analysis are available, but most have limitations, particularly for complex multivariate designs. An SPSS procedure is presented that can be used for calculating power for univariate, multivariate, and repeated measures models with and without time-varying and time-constant covariates. Three examples provide a framework for calculating power via this method: an ANCOVA, a MANOVA, and a repeated measures ANOVA with two or more groups. The benefits and limitations of this procedure are discussed.

  17. Displacement-Based Seismic Design Procedure for Framed Buildings with Dissipative Braces Part II: Numerical Results

    International Nuclear Information System (INIS)

    Mazza, Fabio; Vulcano, Alfonso

    2008-01-01

    For a widespread application of dissipative braces to protect framed buildings against seismic loads, practical and reliable design procedures are needed. In this paper a design procedure based on the Direct Displacement-Based Design approach is adopted, assuming the elastic lateral storey-stiffness of the damped braces proportional to that of the unbraced frame. To check the effectiveness of the design procedure, presented in an associate paper, a six-storey reinforced concrete plane frame, representative of a medium-rise symmetric framed building, is considered as primary test structure; this structure, designed in a medium-risk region, is supposed to be retrofitted as in a high-risk region, by insertion of diagonal braces equipped with hysteretic dampers. A numerical investigation is carried out to study the nonlinear static and dynamic responses of the primary and the damped braced test structures, using step-by-step procedures described in the associate paper mentioned above; the behaviour of frame members and hysteretic dampers is idealized by bilinear models. Real and artificial accelerograms, matching EC8 response spectrum for a medium soil class, are considered for dynamic analyses

  18. Seismic Retrofit of Reinforced Concrete Frame Buildings with Hysteretic Bracing Systems: Design Procedure and Behaviour Factor

    Directory of Open Access Journals (Sweden)

    Antonio Di Cesare

    2017-01-01

    Full Text Available This paper presents a design procedure to evaluate the mechanical characteristics of hysteretic Energy Dissipation Bracing (EDB systems for seismic retrofitting of existing reinforced concrete framed buildings. The proposed procedure, aiming at controlling the maximum interstorey drifts, imposes a maximum top displacement as function of the seismic demand and, if needed, regularizes the stiffness and strength of the building along its elevation. In order to explain the application of the proposed procedure and its capacity to involve most of the devices in the energy dissipation with similar level of ductility demand, a simple benchmark structure has been studied and nonlinear dynamic analyses have been performed. A further goal of this work is to propose a simplified approach for designing dissipating systems based on linear analysis with the application of a suitable behaviour factor, in order to achieve a widespread adoption of the passive control techniques. At this goal, the increasing of the structural performances due to the addition of an EDB system designed with the above-mentioned procedure has been estimated considering one thousand case studies designed with different combinations of the main design parameters. An analytical formulation of the behaviour factor for braced buildings has been proposed.

  19. A Systematic Procedure for the Generation of Cost-Minimized Designs

    DEFF Research Database (Denmark)

    Becker, Peter W.; Jarkler, Bjorn

    1972-01-01

    We present a procedure for the generation of cost-minimized designs of circuits and systems. Suppose a designer has decided upon the topology of his product. Also suppose he knows the cost and quality of the different grades of the N components required to implement the product. The designer...... then faces the following problem: How should he proceed to find the combination of grades that will give him the desired manufacturing yield at minimum product cost? We discuss the problem and suggest a policy by which the designer, with a reasonable computational effort, can find a set of ``good...

  20. Procedure for developing biological input for the design, location, or modification of water-intake structures

    Energy Technology Data Exchange (ETDEWEB)

    Neitzel, D.A.; McKenzie, D.H.

    1981-12-01

    To minimize adverse impact on aquatic ecosystems resulting from the operation of water intake structures, design engineers must have relevant information on the behavior, physiology and ecology of local fish and shellfish. Identification of stimulus/response relationships and the environmental factors that influence them is the first step in incorporating biological information in the design, location or modification of water intake structures. A procedure is presented in this document for providing biological input to engineers who are designing, locating or modifying a water intake structure. The authors discuss sources of stimuli at water intakes, historical approaches in assessing potential/actual impact and review biological information needed for intake design.

  1. Assessment of patient’s anxiety and expectation associated with hemodynamic changes during surgical procedure under local anesthesia

    Directory of Open Access Journals (Sweden)

    Marcos Vinícius Mendes DANTAS

    Full Text Available Abstract Introduction The dental patient’s anxiety and expectation may significantly alter their vital signs. The use of local anesthetics associated with a vasoconstrictor may also alter the vital signs of these patients, promoting hemodynamic changes that may result in emergency situations. Objective To evaluate the influence of anxiety of patients submitted to third molar extraction and the use of different anesthetic substances with adrenaline on their vital signs (oxygen saturation, heart rate, and systolic and diastolic blood pressure in different moments. Material and method Forty patients answered the questionnaire of the Dental Anxiety Scale (Corah’s Scale and fear (KleinKnecht’s Scale and were submitted to third molar extraction in two surgical times for the use of articaine or mepivacaine, both associated with adrenaline. The results were analyzed by ANOVA followed by Tukey post hoc test, Student's t test, and Pearson's correlation coefficients (α=0.05. Result There was no significant differences in saturation or heart rate. The blood pressure showed significant variations during time for both anesthetics, however mepivacaine resulted in a longer postoperative time to restore blood pressure. Patients with high or moderate anxiety and high fear index were those who had positive correlations with the highest blood pressure values. Conclusion Anxiety and fear positively influence the increase in blood pressure. Mepivacaine promoted a greater resistance to the return of normal vital signs, especially blood pressure levels.

  2. A finite element based substructuring procedure for design analysis of large smart structural systems

    International Nuclear Information System (INIS)

    Ashwin, U; Raja, S; Dwarakanathan, D

    2009-01-01

    A substructuring based design analysis procedure is presented for large smart structural system using the Craig–Bampton method. The smart structural system is distinctively characterized as an active substructure, modelled as a design problem, and a passive substructure, idealized as an analysis problem. Furthermore, a novel thought has been applied by introducing the electro–elastic coupling into the reduction scheme to solve the global structural control problem in a local domain. As an illustration, a smart composite box beam with surface bonded actuators/sensors is considered, and results of the local to global control analysis are presented to show the potential use of the developed procedure. The present numerical scheme is useful for optimally designing the active substructures to study their locations, coupled structure–actuator interaction and provide a solution to the global design of large smart structural systems

  3. Vertical partial frontolateral laryngectomy with simultaneous pedunculated sternothyroid muscle flap reconstruction of the vocal fold - surgical procedure and treatment outcomes.

    Science.gov (United States)

    Jurek-Matusiak, Olga; Wójtowicz, Piotr; Szafarowski, Tomasz; Krzeski, Antoni

    2018-02-28

    The aim of the study was to present the treatment outcomes after vertical partial laryngectomy with or without pedunculated sternothyroid muscle flap reconstruction following the resection of neoplasm-infiltrated vocal fold. The procedure was used in a patient with glottic cancer. Oncological outcomes, morphology of neo-vocal fold and the act of swallowing were evaluated. 45 patients with T1-T2 glottic cancer were subjected to vertical partial laryngectomy with 26 patients undergoing a procedure with pedunculated sternothyroid muscle flap reconstruction and the remaining 19 patients undergoing a procedure without such a reconstruction. Two female and 43 male patients aged 35-82 years (mean age of 62.5 years) were enrolled in the study. Local tumor spread and the condition of reconstructed vocal fold were assessed in sequential videofiberoscopy examination conducted each month after surgery whereas the regional spread was assessed in ultrasound scans. Postoperative aspiration was graded according to the Pearson's scale. Six patients experienced local recurrence while 2 patients experienced regional recurrence of the tumor. The pedunculated sternothyroid muscle flap neo-fold was structurally resemblant of the non-affected vocal fold. Episodic, daily dysphagia was observed in 1 patient while normal act of swallowing with no Pearson's scale symptoms was observed in the remaining 44 patients. No necrosis of pedunculated flap was observed. Vertical partial laryngectomy with or without pedunculated sternothyroid muscle flap reconstruction is a good method for the treatment of low- or intermediate-stage glottic cancer, especially when endoscopic access to the tumor is limited and when CO2 laser cannot be used. No significant functional disorders were observed in operated larynges.

  4. Risk factors for surgical site infection following nonshunt pediatric neurosurgery: a review of 9296 procedures from a national database and comparison with a single-center experience.

    Science.gov (United States)

    Sherrod, Brandon A; Arynchyna, Anastasia A; Johnston, James M; Rozzelle, Curtis J; Blount, Jeffrey P; Oakes, W Jerry; Rocque, Brandon G

    2017-04-01

    OBJECTIVE Surgical site infection (SSI) following CSF shunt operations has been well studied, yet risk factors for nonshunt pediatric neurosurgery are less well understood. The purpose of this study was to determine SSI rates and risk factors following nonshunt pediatric neurosurgery using a nationwide patient cohort and an institutional data set specifically for better understanding SSI. METHODS The authors reviewed the American College of Surgeons National Surgical Quality Improvement Program-Pediatric (ACS NSQIP-P) database for the years 2012-2014, including all neurosurgical procedures performed on pediatric patients except CSF shunts and hematoma evacuations. SSI included deep (intracranial abscesses, meningitis, osteomyelitis, and ventriculitis) and superficial wound infections. The authors performed univariate analyses of SSI association with procedure, demographic, comorbidity, operative, and hospital variables, with subsequent multivariate logistic regression analysis to determine independent risk factors for SSI within 30 days of the index procedure. A similar analysis was performed using a detailed institutional infection database from Children's of Alabama (COA). RESULTS A total of 9296 nonshunt procedures were identified in NSQIP-P with an overall 30-day SSI rate of 2.7%. The 30-day SSI rate in the COA institutional database was similar (3.3% of 1103 procedures, p = 0.325). Postoperative time to SSI in NSQIP-P and COA was 14.6 ± 6.8 days and 14.8 ± 7.3 days, respectively (mean ± SD). Myelomeningocele (4.3% in NSQIP-P, 6.3% in COA), spine (3.5%, 4.9%), and epilepsy (3.4%, 3.1%) procedure categories had the highest SSI rates by procedure category in both NSQIP-P and COA. Independent SSI risk factors in NSQIP-P included postoperative pneumonia (OR 4.761, 95% CI 1.269-17.857, p = 0.021), immune disease/immunosuppressant use (OR 3.671, 95% CI 1.371-9.827, p = 0.010), cerebral palsy (OR 2.835, 95% CI 1.463-5.494, p = 0.002), emergency operation (OR 1

  5. Risk factors for surgical site infection following nonshunt pediatric neurosurgery: a review of 9296 procedures from a national database and comparison with a single-center experience

    Science.gov (United States)

    Sherrod, Brandon A.; Arynchyna, Anastasia A.; Johnston, James M.; Rozzelle, Curtis J.; Blount, Jeffrey P.; Oakes, W. Jerry; Rocque, Brandon G.

    2017-01-01

    Objective Surgical site infection (SSI) following CSF shunt operations has been well studied, yet risk factors for nonshunt pediatric neurosurgery are less well understood. The purpose of this study was to determine SSI rates and risk factors following nonshunt pediatric neurosurgery using a nationwide patient cohort and an institutional dataset specifically for better understanding SSI. Methods The authors reviewed the American College of Surgeons National Surgical Quality Improvement Program Pediatric (ACS NSQIP-P) database for the years 2012–2014, including all neurosurgical procedures performed on pediatric patients except CSF shunts and hematoma evacuations. SSI included deep (intracranial abscesses, meningitis, osteomyelitis, and ventriculitis) and superficial wound infections. The authors performed univariate analyses of SSI association with procedure, demographic, comorbidity, operative, and hospital variables, with subsequent multivariate logistic regression analysis to determine independent risk factors for SSI within 30 days of the index procedure. A similar analysis was performed using a detailed institutional infection database from Children’s Hospital of Alabama (COA). Results A total of 9296 nonshunt procedures were identified in NSQIP-P with an overall 30-day SSI rate of 2.7%. The 30-day SSI rate in the COA institutional database was similar (3.3% of 1103 procedures, p = 0.325). Postoperative time to SSI in NSQIP-P and COA was 14.6 ± 6.8 days and 14.8 ± 7.3 days, respectively (mean ± SD). Myelomeningocele (4.3% in NSQIP-P, 6.3% in COA), spine (3.5%, 4.9%), and epilepsy (3.4%, 3.1%) procedure categoriess had the highest SSI rates by procedure category in both NSQIP-P and COA. Independent SSI risk factors in NSQIP-P included postoperative pneumonia (OR 4.761, 95% CI 1.269–17.857, p = 0.021), immune disease/immunosuppressant use (OR 3.671, 95% CI 1.371–9.827, p = 0.010), cerebral palsy (OR 2.835, 95% CI 1.463–5.494, p = 0.002), emergency

  6. The need for unique risk adjustment for surgical site infections at a high-volume, tertiary care center with inherent high-risk colorectal procedures.

    Science.gov (United States)

    Gorgun, E; Benlice, C; Hammel, J; Hull, T; Stocchi, L

    2017-08-01

    The aim of the present study was to create a unique risk adjustment model for surgical site infection (SSI) in patients who underwent colorectal surgery (CRS) at the Cleveland Clinic (CC) with inherent high risk factors by using a nationwide database. The American College of Surgeons National Surgical Quality Improvement Program database was queried to identify patients who underwent CRS between 2005 and 2010. Initially, CC cases were identified from all NSQIP data according to case identifier and separated from the other NSQIP centers. Demographics, comorbidities, and outcomes were compared. Logistic regression analyses were used to assess the association between SSI and center-related factors. A total of 70,536 patients met the inclusion criteria and underwent CRS, 1090 patients (1.5%) at the CC and 69,446 patients (98.5%) at other centers. Male gender, work-relative value unit, diagnosis of inflammatory bowel disease, pouch formation, open surgery, steroid use, and preoperative radiotherapy rates were significantly higher in the CC cases. Overall morbidity and individual postoperative complication rates were found to be similar in the CC and other centers except for the following: organ-space SSI and sepsis rates (higher in the CC cases); and pneumonia and ventilator dependency rates (higher in the other centers). After covariate adjustment, the estimated degree of difference between the CC and other institutions with respect to organ-space SSI was reduced (OR 1.38, 95% CI 1.08-1.77). The unique risk adjustment strategy may provide center-specific comprehensive analysis, especially for hospitals that perform inherently high-risk procedures. Higher surgical complexity may be the reason for increased SSI rates in the NSQIP at tertiary care centers.

  7. Design of the exhale airway stents for emphysema (EASE) trial : an endoscopic procedure for reducing hyperinflation

    NARCIS (Netherlands)

    Shah, Pallav L.; Slebos, Dirk-Jan; Cardoso, Paulo F. G.; Cetti, Edward J.; Sybrecht, Gerhard W.; Cooper, Joel D.

    2011-01-01

    Background: Airway Bypass is a catheter-based, bronchoscopic procedure in which new passageways are created that bypass the collapsed airways, enabling trapped air to exit the lungs. The Exhale Airway Stents for Emphysema (EASE) Trial was designed to investigate whether Exhale (R) Drug-Eluting

  8. Revisiting the Concepts "Approach", "Design" and "Procedure" According to the Richards and Rodgers (2011) Framework

    Science.gov (United States)

    Cumming, Brett

    2012-01-01

    The three concepts Approach, Design and Procedure as proposed in Rodgers' Framework are considered particularly effective as a framework in second language teaching with the specific aim of developing communication as well as for better understanding methodology in the use of communicative language use.

  9. 44 CFR 19.135 - Designation of responsible employee and adoption of grievance procedures.

    Science.gov (United States)

    2010-10-01

    ... BASIS OF SEX IN EDUCATION PROGRAMS OR ACTIVITIES RECEIVING FEDERAL FINANCIAL ASSISTANCE Introduction... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Designation of responsible employee and adoption of grievance procedures. 19.135 Section 19.135 Emergency Management and Assistance...

  10. The quality of procedures to assess and credit prior learning: Implications for design.

    NARCIS (Netherlands)

    Joosten-ten Brinke, Desirée; Sluijsmans, Dominique; Brand-Gruwel, Saskia; Jochems, Wim

    2008-01-01

    Joosten-ten Brinke, D., Sluijsmans, D. M. A., Brand-Gruwel, S., & Jochems, W. M. G. (2008). The quality of procedures to assess and credit prior learning: Implications for design. Educational Research Review, 3, 51-65. doi:10.1016/j.edurev.2007.08.001.

  11. 24 CFR 3285.306 - Design procedures for concrete block piers.

    Science.gov (United States)

    2010-04-01

    ... piers less than 36 inches high are permitted to be constructed of single, open, or closed-cell concrete... shown in Figure A to this section. (3) The concrete blocks must be stacked with their hollow cells... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Design procedures for concrete...

  12. 13 CFR 113.135 - Designation of responsible employee and adoption of grievance procedures.

    Science.gov (United States)

    2010-01-01

    ... employee and adoption of grievance procedures. 113.135 Section 113.135 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION NONDISCRIMINATION IN FINANCIAL ASSISTANCE PROGRAMS OF SBA-EFFECTUATION OF POLICIES... Programs or Activities Receiving Federal Financial Assistance Introduction § 113.135 Designation of...

  13. Design Procedure for High-Speed PM Motors Aided by Optimization Algorithms

    Directory of Open Access Journals (Sweden)

    Francesco Cupertino

    2018-02-01

    Full Text Available This paper considers the electromagnetic and structural co-design of superficial permanent magnet synchronous machines for high-speed applications, with the aid of a Pareto optimization procedure. The aim of this work is to present a design procedure for the afore-mentioned machines that relies on the combined used of optimization algorithms and finite element analysis. The proposed approach allows easy analysis of the results and a lowering of the computational burden. The proposed design method is presented through a practical example starting from the specifications of an aeronautical actuator. The design procedure is based on static finite element simulations for electromagnetic analysis and on analytical formulas for structural design. The final results are validated through detailed transient finite element analysis to verify both electromagnetic and structural performance. The step-by-step presentation of the proposed design methodology allows the reader to easily adapt it to different specifications. Finally, a comparison between a distributed-winding (24 slots and a concentrated-winding (6 slots machine is presented demonstrating the advantages of the former winding arrangement for high-speed applications.

  14. Lung Volume Reduction in Chronic Obstructive Pulmonary Disease (COPD AND#8211; An Updated Review of Surgical and Endoscopic Procedures

    Directory of Open Access Journals (Sweden)

    Ramakant Dixit

    2012-08-01

    Full Text Available The conventional medical management of emphysema using bronchodilators and anti-inflammatory agents has a limited benefit in patients having advanced hyperinflation of lungs due to destruction of elastic tissue. The natural course of Chronic Obstructive Pulmonary Disease (COPD has been shown to be altered by only smoking cessation and oxygen therapy so far. The lung volume reduction surgery is viewed as another modality to change the natural history of emphysema in recent years. For patients with more generalized emphysema, resection of lung parenchyma improves elastic recoil and chest wall mechanics. An extensive literature search has demonstrated that carefully selected patients of emphysema (i.e. upper lobe predominant disease, low exercise capacity and Forced Expiratory Volume in First Second (FEV1 and DLco and #8804; 20% of predicted receive benefits in terms of symptomatic improvement and physiologic response following Lung Volume Reduction Surgery (LVRS. The resurgent interest in LVRS and National Emphysema Treatment Trial findings for emphysema have stimulated a range of innovative methods, to improve the outcome and reduce complications associated with current LVRS techniques. These novel approaches include surgical resection with compression/banding devices, endobronchial blockers, sealants, obstructing devices and valves and endobronchial bronchial bypass approaches. Experimental data and preliminary results are becoming available for some of these approaches. Most of the published studies so far have been uncontrolled and unblinded. Overall, extensive research in the near future will help to determine the potential clinical applicability of these new approaches to the treatment of emphysema symptoms. [Arch Clin Exp Surg 2012; 1(4.000: 249-257

  15. Choice of Surgical Procedure for Patients With Non-Small-Cell Lung Cancer ≤ 1 cm or > 1 to 2 cm Among Lobectomy, Segmentectomy, and Wedge Resection

    DEFF Research Database (Denmark)

    Dai, Chenyang; Shen, Jianfei; Ren, Yijiu

    2016-01-01

    PURPOSE: According to the lung cancer staging project, T1a (≤ 2 cm) non-small-cell lung cancer (NSCLC) should be additionally classified into ≤ 1 cm and > 1 to 2 cm groups. This study aimed to investigate the surgical procedure for NSCLC ≤ 1 cm and > 1 to 2 cm. METHODS: We identified 15...... multiple prognostic factors. RESULTS: OS and LCSS favored lobectomy compared with segmentectomy or wedge resection in patients with NSCLC ≤ 1 cm and > 1 to 2 cm. Multivariable analysis showed that segmentectomy and wedge resection were independently associated with poorer OS and LCSS than lobectomy...... for NSCLC ≤ 1 cm and > 1 to 2 cm. With sublobar resection, lower OS and LCSS emerged for NSCLC > 1 to 2 cm after wedge resection, whereas similar survivals were observed for NSCLC ≤ 1 cm. Multivariable analyses showed that wedge resection is an independent risk factor of survival for NSCLC > 1 to 2 cm...

  16. The results of Scarf osteotomy combined with distal soft tissue procedure are mostly satisfactory in surgical management of moderate to severe hallux valgus.

    Science.gov (United States)

    Şaylı, Uğur; Akman, Budak; Tanrıöver, Altuğ; Kaspar, Çiğdem; Güven, Melih; Özler, Turhan

    2017-05-29

    Intrinsically stable diaphyseal osteotomy gained popularity in recent years for symptomatic hallux valgus deformities. In this study, Scarf osteotomy results, in surgical management of moderate to severe hallux valgus, are presented. Study group consisted of 40 feet of 32 (28 females, four males) patients surgically managed by Scarf osteotomy between September 2009 and 2011, with a mean age of 52,98 (range, 31-75) years at the time of surgery. Patient satisfaction and VAS were used for subjective evaluation while for objective measures AOFAS score, first metatarsophalangeal joint ROM and radiological measurements (intermetatarsal, hallux valgus and distal metatarsal articular angles) were evaluated. Mean follow-up period was 38 (range, 24-60) months. Sixteen feet (40%) were reported as very satisfied, 19 (47,5%) as satisfied and the remaining five (12,5%) as unsatisfied resulting with a total of 35 (87,5%) satisfaction. The mean preoperative VAS and AOFAS forefoot scores improved from 8,13±0,791 to 2,68±1,228 (p=0,0001) and from 58,25±6,15 to 78,25±8,13 (p=0,0001) on the final follow-up, respectively. The postoperative change of first metatarsophalangeal joint ROM was not statistically significant (p=0,281). On the radiological evaluation; intermetatarsal and hallux valgus angles improved from a mean value of 14,77±1,76 to 8,13±1,52° (p=0,0001) and from 35,28±5,86 to 20,10±5,55° (p=0,0001), respectively. Distal metatarsal articular angle did not show any statistically significant change (p=0,195). Scarf osteotomy combined with distal soft tissue procedure is a technically demanding procedure. The osteotomy is intrinsically stable and the correction power is high and the results are mostly satisfactory. Copyright © 2017. Published by Elsevier Ltd.

  17. The ADOPT-LC score: a novel predictive index of in-hospital mortality of cirrhotic patients following surgical procedures, based on a national survey.

    Science.gov (United States)

    Sato, Masaya; Tateishi, Ryosuke; Yasunaga, Hideo; Horiguchi, Hiromasa; Matsui, Hiroki; Yoshida, Haruhiko; Fushimi, Kiyohide; Koike, Kazuhiko

    2017-03-01

    We aimed to develop a model for predicting in-hospital mortality of cirrhotic patients following major surgical procedures using a large sample of patients derived from a Japanese nationwide administrative database. We enrolled 2197 cirrhotic patients who underwent elective (n = 1973) or emergency (n = 224) surgery. We analyzed the risk factors for postoperative mortality and established a scoring system for predicting postoperative mortality in cirrhotic patients using a split-sample method. In-hospital mortality rates following elective or emergency surgery were 4.7% and 20.5%, respectively. In multivariate analysis, patient age, Child-Pugh (CP) class, Charlson Comorbidity Index (CCI), and duration of anesthesia in elective surgery were significantly associated with in-hospital mortality. In emergency surgery, CP class and duration of anesthesia were significant factors. Based on multivariate analysis in the training set (n = 987), the Adequate Operative Treatment for Liver Cirrhosis (ADOPT-LC) score that used patient age, CP class, CCI, and duration of anesthesia to predict in-hospital mortality following elective surgery was developed. This scoring system was validated in the testing set (n = 986) and produced an area under the curve of 0.881. We also developed iOS/Android apps to calculate ADOPT-LC scores to allow easy access to the current evidence in daily clinical practice. Patient age, CP class, CCI, and duration of anesthesia were identified as important risk factors for predicting postoperative mortality in cirrhotic patients. The ADOPT-LC score effectively predicts in-hospital mortality following elective surgery and may assist decisions regarding surgical procedures in cirrhotic patients based on a quantitative risk assessment. © 2016 The Authors Hepatology Research published by John Wiley & Sons Australia, Ltd on behalf of Japan Society of Hepatology.

  18. Pilot study: evaluation of the use of the convergent interview technique in understanding the perception of surgical design and simulation.

    Science.gov (United States)

    Logan, Heather; Wolfaardt, Johan; Boulanger, Pierre; Hodgetts, Bill; Seikaly, Hadi

    2013-06-19

    It is important to understand the perceived value of surgical design and simulation (SDS) amongst surgeons, as this will influence its implementation in clinical settings. The purpose of the present study was to examine the application of the convergent interview technique in the field of surgical design and simulation and evaluate whether the technique would uncover new perceptions of virtual surgical planning (VSP) and medical models not discovered by other qualitative case-based techniques. Five surgeons were asked to participate in the study. Each participant was interviewed following the convergent interview technique. After each interview, the interviewer interpreted the information by seeking agreements and disagreements among the interviewees in order to understand the key concepts in the field of SDS. Fifteen important issues were extracted from the convergent interviews. In general, the convergent interview was an effective technique in collecting information about the perception of clinicians. The study identified three areas where the technique could be improved upon for future studies in the SDS field.

  19. Comparative clinical study of the effect of LLLT in the immediate and late treatments of hypoesthesia due to surgical procedures

    Science.gov (United States)

    Ladalardo, Thereza C.; Brugnera, Aldo, Jr.; Pinheiro, Antonio L. B.; Castanho Garrini, Ana E.; Bologna, Elisangela D.; Takamoto, Marcia; Siqueira, Jose T.; Dias, Pedro; Campos, Roberto A. d. C.

    2002-06-01

    We evaluated the effect of LLLT in 68 patients who presented hypoesthesia due to odontological surgery procedures: dental implant surgeries (N=51); extraction of impacted lower third molars (N=10); endodontics in lower first molars (N=7). Lesions treated within 30 days after the nerve injury had occurred were part of the immediate group, and lesions with more than 30 days from the occurrence of the injury were part of the late group. Treatments were carried out with an infrared diode laser of 40 mW-830nm, continuous wave emission, spot size 3 mm2, and a total dosage of 18 joules per session in a contact mode of application, 20 sessions altogether. The efficacy of laser therapy in peripheral nerve regeneration is also related to the degree of the peripheral nerve lesion, and not only to the lesion duration. LLLT resulted in neurosensory functional improvement in both immediate and late treatments of hypoesthesia.

  20. Do single-use medical devices containing biopolymers reduce the environmental impacts of surgical procedures compared with their plastic equivalents?

    Science.gov (United States)

    Unger, Scott R; Hottle, Troy A; Hobbs, Shakira R; Thiel, Cassandra L; Campion, Nicole; Bilec, Melissa M; Landis, Amy E

    2017-01-01

    Background While petroleum-based plastics are extensively used in health care, recent developments in biopolymer manufacturing have created new opportunities for increased integration of biopolymers into medical products, devices and services. This study compared the environmental impacts of single-use disposable devices with increased biopolymer content versus typically manufactured devices in hysterectomy. Methods A comparative life cycle assessment of single-use disposable medical products containing plastic(s) versus the same single-use medical devices with biopolymers substituted for plastic(s) at Magee-Women's Hospital (Magee) in Pittsburgh, PA and the products used in four types of hysterectomies that contained plastics potentially suitable for biopolymer substitution. Magee is a 360-bed teaching hospital, which performs approximately 1400 hysterectomies annually. Results There are life cycle environmental impact tradeoffs when substituting biopolymers for petroplastics in procedures such as hysterectomies. The substitution of biopolymers for petroleum-based plastics increased smog-related impacts by approximately 900% for laparoscopic and robotic hysterectomies, and increased ozone depletion-related impacts by approximately 125% for laparoscopic and robotic hysterectomies. Conversely, biopolymers reduced life cycle human health impacts, acidification and cumulative energy demand for the four hysterectomy procedures. The integration of biopolymers into medical products is correlated with reductions in carcinogenic impacts, non-carcinogenic impacts and respiratory effects. However, the significant agricultural inputs associated with manufacturing biopolymers exacerbate environmental impacts of products and devices made using biopolymers. Conclusions The integration of biopolymers into medical products is correlated with reductions in carcinogenic impacts, non-carcinogenic impacts and respiratory effects; however, the significant agricultural inputs associated

  1. A design procedure for the phase-controlled parallel-loaded resonant inverter

    Science.gov (United States)

    King, Roger J.

    1989-01-01

    High-frequency-link power conversion and distribution based on a resonant inverter (RI) has been recently proposed. The design of several topologies is reviewed, and a simple approximate design procedure is developed for the phase-controlled parallel-loaded RI. This design procedure seeks to ensure the benefits of resonant conversion and is verified by data from a laboratory 2.5 kVA, 20-kHz converter. A simple phasor analysis is introduced as a useful approximation for design purposes. The load is considered to be a linear impedance (or an ac current sink). The design procedure is verified using a 2.5-kVA 20-kHz RI. Also obtained are predictable worst-case ratings for each component of the resonant tank circuit and the inverter switches. For a given load VA requirement, below-resonance operation is found to result in a significantly lower tank VA requirement. Under transient conditions such as load short-circuit, a reversal of the expected commutation sequence is possible.

  2. Optimal design of a novel remote center-of-motion mechanism for minimally invasive surgical robot

    Science.gov (United States)

    Sun, Jingyuan; Yan, Zhiyuan; Du, Zhijiang

    2017-06-01

    Surgical robot with a remote center-of-motion (RCM) plays an important role in minimally invasive surgery (MIS) field. To make the mechanism has high flexibility and meet the demand of movements during processing of operation, an optimized RCM mechanism is proposed in this paper. Then, the kinematic performance and workspace are analyzed. Finally, a new optimization objective function is built by using the condition number index and the workspace index.

  3. Revised guideline for the approval procedure of package designs in Germany

    International Nuclear Information System (INIS)

    Nitsche, F.; Roedel, R.

    2004-01-01

    The IAEA Regulations for the Safe Transport of Radioactive Material, TS-R-1 are applied in Germany through the implementation of the Dangerous Goods Transport Regulations for class 7 of the International Modal Organisations (ADR, RID, IMDG-Code, ICAO-TI). Based on this the approval procedures for packages designs applied in Germany are in compliance with the provisions of TS-R-1. The Guideline R 003 issued by the Ministry of Transport, Building and Housing (BMVBW) in 1991 is the basis for the package design approval procedures in Germany. This Guideline has been reviewed and revised to reflect latest developments in the regulations as well as in the regulatory practice. In particular it has been extended to the approval procedures of Type C packages, packages subject to transitional arrangements, special form and low dispersible radioactive material and provides more detailed information to the applicant about the requested documentation. Publication of this revised guideline has been delayed but it is expected to take place in October 2004. The paper gives an overview about the main parts and provisions of this revised Guideline R 003 with the focus on package design approval procedures

  4. Arthroscopic Surgical Procedures Versus Sham Surgery for Patients With Femoroacetabular Impingement and/or Labral Tears: Study Protocol for a Randomized Controlled Trial (HIPARTI) and a Prospective Cohort Study (HARP).

    Science.gov (United States)

    Risberg, May Arna; Ageberg, Eva; Nilstad, Agnethe; Lund, Bent; Nordsletten, Lars; Løken, Sverre; Ludvigsen, Tom; Kierkegaard, Signe; Carsen, Sasha; Kostogiannis, Ioannis; Crossley, Kay M; Glyn-Jones, Sion; Kemp, Joanne L

    2018-04-01

    Study Design Study protocol for a randomized controlled trial and a prospective cohort. Background The number of arthroscopic surgical procedures for patients with femoroacetabular impingement syndrome (FAIS) has significantly increased worldwide, but high-quality evidence of the effect of such interventions is lacking. Objectives The primary objective will be to determine the efficacy of hip arthroscopic procedures compared to sham surgery on patient-reported outcomes for patients with FAIS (HIP ARThroscopy International [HIPARTI] Study). The secondary objective will be to evaluate prognostic factors for long-term outcome after arthroscopic surgical interventions in patients with FAIS (Hip ARthroscopy Prospective [HARP] Study). Methods The HIPARTI Study will include 140 patients and the HARP Study will include 100 patients. The international Hip Outcome Tool-33 will be the primary outcome measure at 1 year. Secondary outcome measures will be the Hip disability and Osteoarthritis Outcome Score, Arthritis Self-Efficacy Scale, fear of movement (Tampa Scale of Kinesiophobia), Patient-Specific Functional Scale, global rating of change score, and expectations. Other outcomes will include active hip range of motion, hip muscle strength tests, functional performance tests, as well as radiological assessments using radiographs and magnetic resonance imaging. Conclusion To determine the true effect of surgery, beyond that of placebo, double-blinded placebo-controlled trials including sham surgery are needed. The HIPARTI Study will direct future evidence-based treatment of FAIS. Predictors for long-term development and progression of degenerative changes in the hip are also needed for this young patient group with FAIS; hence, responders and nonresponders to treatment could be determined. J Orthop Sports Phys Ther 2018;48(4):325-335. doi:10.2519/jospt.2018.7931.

  5. The effect of different surgical drilling procedures on full laser-etched microgrooves surface-treated implants: an experimental study in sheep.

    Science.gov (United States)

    Jimbo, Ryo; Tovar, Nick; Yoo, Daniel Y; Janal, Malvin N; Anchieta, Rodolfo B; Coelho, Paulo G

    2014-09-01

    To evaluate the influence of instrumentation technique on the early osseointegration histomorphometrics and biomechanical fixation of fully laser-etched microgrooves implant surfaces in a sheep model. Six sheep were subjected to bilateral hip surgeries 3 and 6 weeks before euthanasia. A total of 48 implants (∅4.5 mm, 8 mm in length) were distributed among four sites (8 per animal) and placed in bone sites drilled to 4.6 mm (reamer), 4.1 mm (loose), 3.7 mm (medium) and 3.2 mm (tight) in diameter. After healing, the animals were euthanized and half of the implants were biomechanically tested, while the remainder was subjected to non-decalcified histologic processing. The histomorphometric parameters assessed were bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO). Statistical analysis was performed using a mixed-model analysis of variance with significance level set at P bone seemed to be in contact to the implant surface, at 3 weeks, whereas the implants placed in press-fit situations were mainly supported by cortical bone. The laser-etched microgrooved implant presented osteoconductive and biocompatible properties for all surgical procedures tested. However, procedures providing increasingly higher press-fit scenarios presented the strongest histomorphometric and biomechanical responses at 3 and 6 weeks. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  6. A Comparison of the Incidence of Early Postoperative Infections between Patients Using Synthetic Mesh and Those Undergoing Traditional Pelvic Reconstructive Surgical Procedures

    Directory of Open Access Journals (Sweden)

    Jaromír Mašata

    2013-01-01

    Full Text Available New mesh-related complications such as erosion, etc., can result from abnormal postoperative healing due to surgical site infection. The aim of our study was to compare systemic inflammatory responses and the incidence of early infectious complications after reconstructive surgery using synthetic mesh and after traditional vaginal wall repair. In this prospective observational study 99 women with symptomatic pelvic organ prolapse were included; 55 women underwent traditional repair and 44 repair using mesh. After the procedure infectious complications were monitored. The patients who underwent reconstructive surgery using mesh material were more likely to have febrile morbidity in the postoperative period than the patients who had been treated with traditional repair (p=0.031; there was a higher incidence of combination febrile morbidity with elevated C-reactive protein (CRP > 50 mg/l; p=0.046, and a higher incidence of CRP increase over 30 mg/l; p=0.005. Reconstructive procedures using synthetic mesh are accompanied by a higher incidence of early post-operative infectious complications.

  7. Modified end-to-side double-layer open pancreaticogastrostomy after Whipple procedure: surgical tips for a safe anastomosis.

    Science.gov (United States)

    Dalla Valle, Raffaele; Rossini, Matteo; Lamecchi, Laura; Iaria, Maurizio

    2018-03-01

    Pancreatic fistula (PF) remains the Achilles' heel of pancreaticoduodenectomy (PD). Pancreaticogastrostomy (PG) appears to be associated with a lower risk of postoperative leak according to recent evidence. We started to fashion PG, especially in soft pancreas, modifying the original technique described by Bassi. At our institution, 105 PD procedures were carried out from January 2011 to December 2016; pancreatic-enteric continuity was restored by PG in 35 cases. Superior mesenteric/portal vein resection/reconstruction was necessary in three patients. A total of 34/35 patients underwent PG with an open anterior gastrostomy approach. Briefly, our double-layer PG anastomosis (illustrated by a video) starts with a posterior row of interrupted absorbable 4/0 monofilament sutures including the gastric serosa and the pancreatic capsule. It is essential to mobilize the left pancreas for 4-5 cm and to shape the posterior gastrostomy shorter than the pancreatic stump. After a wide anterior auxiliary gastrostomy the pancreas is invaginated into the stomach and an interrupted row of sutures between the posterior gastric wall (full-thickness) and the body of the pancreatic stump is fashioned. The anterior gastrostomy is closed with an absorbable running suture. Finally, a further layer of sutures is applied over the posterior suture line between the gastric serosa and the pancreatic capsule. The 90-day postoperative mortality was nihil. No biliary leakage was detected and the overall PF rate was 11.4% (4/35) according to the ISGPF study group. Only one patient suffered a grade B PF (in this case, PG was carried out only through a posterior gastrostomy), whereas three patients had a minor (grade A) PF. Our modified PG proved to be safe and easy to perform, while it carried excellent outcomes even in the setting of soft pancreas. Despite the limited number of cases, such modified PG appears promising, particularly for pancreatic remnants at higher risk of PF.

  8. Contribution of the ergonomic analysis to the improvement of the design of operating procedures in nuclear power plants

    International Nuclear Information System (INIS)

    Dien, Y.; Montmayeul, R.

    1992-11-01

    The design of operating procedures for continuous processes is much too often based on implicit assumptions both concerning the operators and the operating conditions that must be dealt with. The merit of the ergonomic approach to the design of procedures is to take account of the way the various operators actually use operating procedures. The actual use is determined from the analysis of on-site operation (normal and incident operating conditions) and the analysis of full-scale simulators tests (incident operating conditions). The introduction of the ergonomic approach in the procedure design results in new design principles being proposed

  9. Trends in hospital admissions and surgical procedures for degenerative lumbar spine disease in England: a 15-year time-series study

    Science.gov (United States)

    Sivasubramaniam, Vinothan; Patel, Hitesh C; Ozdemir, Baris A; Papadopoulos, Marios C

    2015-01-01

    Objectives Low back pain (LBP), from degenerative lumbar spine disease, represents a significant burden on healthcare resources. Studies worldwide report trends attributable to their country's specific demographics and healthcare system. Considering England's specific medico-socioeconomic conditions, we investigate recent trends in hospital admissions and procedures for LBP, and discuss the implications for the allocation of healthcare resources. Design Retrospective cohort study using Hospital Episode Statistics data relating to degenerative lumbar spine disease in England, between 1999 and 2013. Regression models were used to analyse trends. Outcome measures Trends in the number of admissions and procedures for LBP, mean patient age, gender and length of stay. Results Hospital admissions and procedures have increased significantly over the study period, from 127.09 to 216.16 and from 24.5 to 48.83 per 100 000, respectively, (pdisease, and highlight the need for services capable of dealing with the increased comorbidity burden associated with an ageing patient group. PMID:26671956

  10. Progress of Design Improvements for APR1400 Computerized Procedure System from HFE V and V results and Design Experience

    International Nuclear Information System (INIS)

    Lee, Sungjin; Seong, Nokyu

    2015-01-01

    This study shows major already improved design features from the above three processes and a design proposal for to-be-improving items. APR1400 CPS has been verified and validated by the HFE process, internal design review and site acceptance tests. APR1400 Computerized Procedure System (CPS) has been applied to Shin-Kori Nuclear Power Plant (SKN) 3 and 4 units, Shin-Hanul Nuclear Power Plant (SHN) 1 and 2 units and Baraka Nuclear Power Plant (BNPP) 1, 2, 3 and 4 units. Since APR1400 CPS is a first-of-a-kind (FOAK) human machine interface (HMI) for executing a computerized procedure in the nuclear power plant's main control room in South Korea, it has been continuously improved through a) the human factor engineering (HFE) verification and validation (V and V), b) the internal design review and c) prototype tests. Human engineering discrepancies (HEDs) can be identified by the HFE V and V activity. Some HEDs of APR1400 CPS for SKN 3 and 4 and SHN 1 and 2 have been adopted as a role of design improvement in the CPS system while others were regarded as an operator training requirement or part of task contents. Various requests for improving the CPS have been collected from those results. A HMI system should be improved continuously for removing potential defects. Some of introduced design features in this paper has been adopted for APR1400 nuclear power plants. Some of them are under the review in the CPS design team of KHNP

  11. Experimental design technique applied to the validation of an instrumental Neutron Activation Analysis procedure

    International Nuclear Information System (INIS)

    Santos, Uanda Paula de M. dos; Moreira, Edson Gonçalves

    2017-01-01

    In this study optimization of procedures and standardization of Instrumental Neutron Activation Analysis (INAA) method were carried out for the determination of the elements bromine, chlorine, magnesium, manganese, potassium, sodium and vanadium in biological matrix materials using short irradiations at a pneumatic system. 2 k experimental designs were applied for evaluation of the individual contribution of selected variables of the analytical procedure in the final mass fraction result. The chosen experimental designs were the 2 3 and the 2 4 , depending on the radionuclide half life. Different certified reference materials and multi-element comparators were analyzed considering the following variables: sample decay time, irradiation time, counting time and sample distance to detector. Comparator concentration, sample mass and irradiation time were maintained constant in this procedure. By means of the statistical analysis and theoretical and experimental considerations, it was determined the optimized experimental conditions for the analytical methods that will be adopted for the validation procedure of INAA methods in the Neutron Activation Analysis Laboratory (LAN) of the Research Reactor Center (CRPq) at the Nuclear and Energy Research Institute (IPEN /CNEN-SP). Optimized conditions were estimated based on the results of z-score tests, main effect, interaction effects and better irradiation conditions. (author)

  12. Experimental design technique applied to the validation of an instrumental Neutron Activation Analysis procedure

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Uanda Paula de M. dos; Moreira, Edson Gonçalves, E-mail: uandapaula@gmail.com, E-mail: emoreira@ipen.br [Instituto de Pesquisas Energéticas e Nucleares (IPEN/CNEN-SP), São Paulo, SP (Brazil)

    2017-07-01

    In this study optimization of procedures and standardization of Instrumental Neutron Activation Analysis (INAA) method were carried out for the determination of the elements bromine, chlorine, magnesium, manganese, potassium, sodium and vanadium in biological matrix materials using short irradiations at a pneumatic system. 2{sup k} experimental designs were applied for evaluation of the individual contribution of selected variables of the analytical procedure in the final mass fraction result. The chosen experimental designs were the 2{sup 3} and the 2{sup 4}, depending on the radionuclide half life. Different certified reference materials and multi-element comparators were analyzed considering the following variables: sample decay time, irradiation time, counting time and sample distance to detector. Comparator concentration, sample mass and irradiation time were maintained constant in this procedure. By means of the statistical analysis and theoretical and experimental considerations, it was determined the optimized experimental conditions for the analytical methods that will be adopted for the validation procedure of INAA methods in the Neutron Activation Analysis Laboratory (LAN) of the Research Reactor Center (CRPq) at the Nuclear and Energy Research Institute (IPEN /CNEN-SP). Optimized conditions were estimated based on the results of z-score tests, main effect, interaction effects and better irradiation conditions. (author)

  13. Development, implementation, and evaluation of a hybrid electronic medical record system specifically designed for a developing world surgical service.

    Science.gov (United States)

    Laing, G L; Bruce, J L; Skinner, D L; Allorto, N L; Clarke, D L; Aldous, C

    2014-06-01

    The Pietermaritzburg Metropolitan Trauma Service previously successfully constructed and implemented an electronic surgical registry (ESR). This study reports on our attempts to expand and develop this concept into a multi-functional hybrid electronic medical record (HEMR) system for use in a tertiary level surgical service. This HEMR system was designed to incorporate the function and benefits of an ESR, an electronic medical record (EMR) system, and a clinical decision support system (CDSS). Formal ethical approval to maintain the HEMR system was obtained. Appropriate software was sourced to develop the project. The data model was designed as a relational database. Following the design and construction process, the HEMR file was launched on a secure server. This provided the benefits of access security and automated backups. A systematic training program was implemented for client training. The exercise of data capture was integrated into the process of clinical workflow, taking place at multiple points in time. Data were captured at the times of admission, operative intervention, endoscopic intervention, adverse events (morbidity), and the end of patient care (discharge, transfer, or death). A quarterly audit was performed 3 months after implementation of the HEMR system. The data were extracted and audited to assess their quality. A total of 1,114 patient entries were captured in the system. Compliance rates were in the order of 87-100 %, and client satisfaction rates were high. It is possible to construct and implement a unique, simple, cost-effective HEMR system in a developing world surgical service. This information system is unique in that it combines the discrete functions of an EMR system with an ESR and a CDSS. We identified a number of potential limitations and developed interventions to ameliorate them. This HEMR system provides the necessary platform for ongoing quality improvement programs and clinical research.

  14. Changing use of surgical antibiotic prophylaxis in Thika Hospital, Kenya: a quality improvement intervention with an interrupted time series design.

    Directory of Open Access Journals (Sweden)

    Alexander M Aiken

    Full Text Available In low-income countries, Surgical Site Infection (SSI is a common form of hospital-acquired infection. Antibiotic prophylaxis is an effective method of preventing these infections, if given immediately before the start of surgery. Although several studies in Africa have compared pre-operative versus post-operative prophylaxis, there are no studies describing the implementation of policies to improve prescribing of surgical antibiotic prophylaxis in African hospitals.We conducted SSI surveillance at a typical Government hospital in Kenya over a 16 month period between August 2010 and December 2011, using standard definitions of SSI and the extent of contamination of surgical wounds. As an intervention, we developed a hospital policy that advised pre-operative antibiotic prophylaxis and discouraged extended post-operative antibiotics use. We measured process, outcome and balancing effects of this intervention in using an interrupted time series design.From a starting point of near-exclusive post-operative antibiotic use, after policy introduction in February 2011 there was rapid adoption of the use of pre-operative antibiotic prophylaxis (60% of operations at 1 week; 98% at 6 weeks and a substantial decrease in the use of post-operative antibiotics (40% of operations at 1 week; 10% at 6 weeks in Clean and Clean-Contaminated surgery. There was no immediate step-change in risk of SSI, but overall, there appeared to be a moderate reduction in the risk of superficial SSI across all levels of wound contamination. There were marked reductions in the costs associated with antibiotic use, the number of intravenous injections performed and nursing time spent administering these.Implementation of a locally developed policy regarding surgical antibiotic prophylaxis is an achievable quality improvement target for hospitals in low-income countries, and can lead to substantial benefits for individual patients and the institution.

  15. Changing use of surgical antibiotic prophylaxis in Thika Hospital, Kenya: a quality improvement intervention with an interrupted time series design.

    Science.gov (United States)

    Aiken, Alexander M; Wanyoro, Anthony K; Mwangi, Jonah; Juma, Francis; Mugoya, Isaac K; Scott, J Anthony G

    2013-01-01

    In low-income countries, Surgical Site Infection (SSI) is a common form of hospital-acquired infection. Antibiotic prophylaxis is an effective method of preventing these infections, if given immediately before the start of surgery. Although several studies in Africa have compared pre-operative versus post-operative prophylaxis, there are no studies describing the implementation of policies to improve prescribing of surgical antibiotic prophylaxis in African hospitals. We conducted SSI surveillance at a typical Government hospital in Kenya over a 16 month period between August 2010 and December 2011, using standard definitions of SSI and the extent of contamination of surgical wounds. As an intervention, we developed a hospital policy that advised pre-operative antibiotic prophylaxis and discouraged extended post-operative antibiotics use. We measured process, outcome and balancing effects of this intervention in using an interrupted time series design. From a starting point of near-exclusive post-operative antibiotic use, after policy introduction in February 2011 there was rapid adoption of the use of pre-operative antibiotic prophylaxis (60% of operations at 1 week; 98% at 6 weeks) and a substantial decrease in the use of post-operative antibiotics (40% of operations at 1 week; 10% at 6 weeks) in Clean and Clean-Contaminated surgery. There was no immediate step-change in risk of SSI, but overall, there appeared to be a moderate reduction in the risk of superficial SSI across all levels of wound contamination. There were marked reductions in the costs associated with antibiotic use, the number of intravenous injections performed and nursing time spent administering these. Implementation of a locally developed policy regarding surgical antibiotic prophylaxis is an achievable quality improvement target for hospitals in low-income countries, and can lead to substantial benefits for individual patients and the institution.

  16. Design flood hydrograph estimation procedure for small and fully-ungauged basins

    Science.gov (United States)

    Grimaldi, S.; Petroselli, A.

    2013-12-01

    The Rational Formula is the most applied equation in practical hydrology due to its simplicity and the effective compromise between theory and data availability. Although the Rational Formula is affected by several drawbacks, it is reliable and surprisingly accurate considering the paucity of input information. However, after more than a century, the recent computational, theoretical, and large-scale monitoring progresses compel us to try to suggest a more advanced yet still empirical procedure for estimating peak discharge in small and ungauged basins. In this contribution an alternative empirical procedure (named EBA4SUB - Event Based Approach for Small and Ungauged Basins) based on the common modelling steps: design hyetograph, rainfall excess, and rainfall-runoff transformation, is described. The proposed approach, accurately adapted for the fully-ungauged basin condition, provides a potentially better estimation of the peak discharge, a design hydrograph shape, and, most importantly, reduces the subjectivity of the hydrologist in its application.

  17. Procedure guide of design, construction of prototypes, calibration and sure operation of nucleonic control systems

    International Nuclear Information System (INIS)

    Banados Perez, H.; Griffith Martinez, J.; Desdin Garcia, L.F.; Rodriguez Cardona, R.L.; Molina, G.; Sebastian Calvo, C.

    1999-01-01

    This Guide was elaborated in the mark of the project RLA/8/024 ARCAL XLII 'Industrial Applications of the Tracer Technology and Nucleonic Control Systems'. Its objective is to establish the approaches for the design, the construction, the selection and the procedures for the sure operation of the Nucleonic Control Systems (NCS) in the industry. The NCS is used to control processes to high speeds, materials with extreme conditions or with noxious chemical properties, susceptible materials of being damaged by contact and packed products. In this document is defined the scope of the procedure. The SCN are classified according to: type of radiations, the mobility of the components, the degree of the beams collimation; and in function of the security. The design and construction criteria of the nuclear meters and of the systems of control nucleonic are exposed

  18. Use of virtual steam generator cassette for tube spatial design and SGC assembling procedure

    International Nuclear Information System (INIS)

    Kim, Y. W.; Kim, J. I.; Ji, S. K.

    2003-01-01

    A method of determining spatial arrangement of tube connection and assembling procedure of once-through helical steam generator cassette utilizing three dimensional virtual steam generator cassette has been developed on the basis of recent 3-D modelling technology. One ends of the steam generator tubes are connected to the module feed water header and the other sides are connected to the module steam header. Due to the complex geometry of tube arrangement, it is very difficult to connect the tubes to the module headers without the help of a physical engineering mock up. A comparative study has been performed at each design step for the tube arrangement and heat transfer area. Heat transfer area computed from thermal sizing was 4% less than that of measured. Heat transfer area calculated from the virtual steam generator cassette mock up has only 0.2% difference with that of measured. Assembling procedure of the steam generator cassette also, can be developed in the design stage

  19. Feasibility and Design of an Electronic Surgical Safety Checklist in a Teaching Hospital: A User-Based Approach.

    Science.gov (United States)

    Kiefel, Karin; Donsa, Klaus; Tiefenbacher, Peter; Mischak, Robert; Brunner, Gernot; Sendlhofer, Gerald; Pieber, Thomas

    2018-01-01

    The Surgical Safety Checklist (SSC) is routinely used in operating rooms (OR) but its acceptance is low. One promising way to improve acceptance of the SSC and thus quality of patient care is digitalization. To investigate how a digitalization of the SSC could be implemented in a teaching hospital. Based on the identified user requirements we designed a first user interface (UI). We performed a literature review, identified user perceptions and requirements during 12 interviews including a standardized questionnaire in surgical departments at the University Hospital Graz (Austria). Subsequently a first prototype of a UI was designed. Seven different approaches for digital SSC were identified in literature. Our interviews showed that 90% of the participants had a positive attitude towards a digitalization of SSC. The most favoured version of a digitalized SSC was a tablet-based client-server system with integration in the EHR and projection on an OR monitor. Digitalization of the SSC is requested by medical and nursing personnel. Based on the identified user requirements we designed a process oriented UI of a digital SSC.

  20. Deformidade de Sprengel: tratamento cirúrgico pela técnica de green modificada Sprengel's deformity: surgical correction by a modified green procedure

    Directory of Open Access Journals (Sweden)

    Sandro da Silva Reginaldo

    2009-06-01

    Full Text Available OBJETIVO: Demonstrar os resultados estéticos e funcionais de pacientes submetidos à correção cirúrgica de escápula alta congênita - deformidade de Sprengel - por uma modificação da técnica de Green, bem como avaliar o grau de satisfação dos pacientes e as complicações da técnica utilizada. MÉTODOS: Foram avaliados nove pacientes operados pela técnica de Green modificada, no período de setembro de 1993 a abril de 2008. Como modificação da técnica original foram realizados descolamento muscular subperiosteal, ressecção apenas da porção súpero-medial da escápula e, em vez da utilização de tração esquelética, optou-se pela fixação com fio de aço subcutâneo da porção medial da espinha da escápula à crista ilíaca posterior contralateral. A idade média dos pacientes foi de sete anos e três meses. O seguimento pós-operatório médio foi de três anos e sete meses. RESULTADOS: Houve incremento médio na elevação de cerca de 39º (variando de 0º a 80º . Segundo a classificação de Cavendish, obteve-se a melhora estética de dois graus em oito casos e de três graus em um. Todos os pacientes ficaram satisfeitos com o resultado. CONCLUSÕES: Os pacientes com deformidade de Sprengel submetidos a tratamento cirúrgico por meio de uma modificação da técnica de Green, com fixação da escápula na crista ilíaca posterior contralateral em vez de se utilizar tração esquelética, apresentaram melhora tanto funcional como estética; todos os pacientes e/ou familiares ficaram satisfeitos e as complicações relacionadas com a técnica cirúrgica não interferiram no resultado final.OBJECTIVE: To evaluate the cosmetic and functional results of patients submitted to surgical correction of Congenital High Scapula (Sprengel's Deformity using modified Green's Procedure, as well as patients' satisfaction and complications. METHODS: Nine patients submitted to surgical treatment from September 1993 to April 2008 have

  1. Design and Performance Evaluation of Real-time Endovascular Interventional Surgical Robotic System with High Accuracy.

    Science.gov (United States)

    Wang, Kundong; Chen, Bing; Lu, Qingsheng; Li, Hongbing; Liu, Manhua; Shen, Yu; Xu, Zhuoyan

    2018-05-15

    Endovascular interventional surgery (EIS) is performed under a high radiation environment at the sacrifice of surgeons' health. This paper introduces a novel endovascular interventional surgical robot that aims to reduce radiation to surgeons and physical stress imposed by lead aprons during fluoroscopic X-ray guided catheter intervention. The unique mechanical structure allowed the surgeon to manipulate the axial and radial motion of the catheter and guide wire. Four catheter manipulators (to manipulate the catheter and guide wire), and a control console which consists of four joysticks, several buttons and two twist switches (to control the catheter manipulators) were presented. The entire robotic system was established on a master-slave control structure through CAN (Controller Area Network) bus communication, meanwhile, the slave side of this robotic system showed highly accurate control over velocity and displacement with PID controlling method. The robotic system was tested and passed in vitro and animal experiments. Through functionality evaluation, the manipulators were able to complete interventional surgical motion both independently and cooperatively. The robotic surgery was performed successfully in an adult female pig and demonstrated the feasibility of superior mesenteric and common iliac artery stent implantation. The entire robotic system met the clinical requirements of EIS. The results show that the system has the ability to imitate the movements of surgeons and to accomplish the axial and radial motions with consistency and high-accuracy. Copyright © 2018 John Wiley & Sons, Ltd.

  2. Prevalence of gallstones in 1,229 patients submitted to surgical laparoscopic treatment of GERD and esophageal achalasia: associated cholecystectomy was a safe procedure.

    Science.gov (United States)

    Sallum, Rubens Antonio Aissar; Padrão, Eduardo Messias Hirano; Szachnowicz, Sergio; Seguro, Francisco C B C; Bianchi, Edno Tales; Cecconello, Ivan

    2015-01-01

    Association between esophageal achalasia/ gastroesophageal reflux disease (GERD) and cholelithiasis is not clear. Epidemiological data are controversial due to different methodologies applied, the regional differences and the number of patients involved. Results of concomitant cholecistectomy associated to surgical treatment of both diseases regarding safety is poorly understood. To analyze the prevalence of cholelithiasis in patients with esophageal achalasia and gastroesophageal reflux submitted to cardiomyotomy or fundoplication. Also, to evaluate the safety of concomitant cholecistectomy. Retrospective analysis of 1410 patients operated from 2000 to 2013. They were divided into two groups: patients with GERD submitted to laparocopic hiatoplasty plus Nissen fundoplication and patients with esophageal achalasia to laparoscopic cardiomyotomy plus partial fundoplication. It was collected epidemiological data, specific diagnosis and subgroups, the presence or absence of gallstones, surgical procedure, operative and clinical complications and mortality. All groups/subgroups were compared. From 1,229 patients with GERD or esophageal achalasia, submitted to laparoscopic cardiomyotomy or fundoplication, 138 (11.43%) had cholelitiasis, occurring more in females (2.38:1) with mean age of 50,27 years old. In 604 patients with GERD, 79 (13,08%) had cholelitiasis. Lower prevalence occurred in Barrett's esophagus patients 7/105 (6.67%) (p=0.037). In 625 with esophageal achalasia, 59 (9.44%) had cholelitiasis, with no difference between chagasic and idiopathic forms (p=0.677). Complications of patients with or without cholecystectomy were similar in fundoplication and cardiomyotomy (p=0.78 and p=1.00).There was no mortality or complications related to cholecystectomy in this series. Prevalence of cholelithiasis was higher in patients submitted to fundoplication (GERD). Patients with chagasic or idiopatic forms of achalasia had the same prevalence of cholelithiasis. Gallstones

  3. [Dental CT in the planning of surgical procedures. Its significance in the oro-maxillofacial region from the viewpoint of the dentist].

    Science.gov (United States)

    Solar, P; Gahleitner, A

    1999-12-01

    Dental computer assisted tomography (Dental CT) represents a valuable addition to the diagnostic spectrum for planning oral and maxillofacial surgery. High resolution CT and specially designed computer software allow representation of the jaws in different planes that are easy to match. They further allow the display of very small structures relevant to oral surgical interventions and reveal their spatial relationship in three dimensions. Thus communication between dentists and radiologists may be intensified and supported by usage of modern telecommunication systems. Dental CT is indicated, when clinical and conventional radiological techniques will not allow exact interpretation of the situation. It is modern oral implantology that primarily benefits from computer software enabling the assessment of surgical sites in the presurgical phase. Such planning was not yet possible using two dimensional radiographic techniques. The dental-implantological part expects from radiography sharply defined contours of the external bony contours and the mandibular canal, exactly defined relation between slices and planes, no distortion in the orthoradial planes, tools for reliable measurements of distances, angles and volumes, possibility to transmit pictures electronically or on hardcopy without loss of quality.

  4. An analytical inductor design procedure for three-phase PWM converters in power factor correction applications

    DEFF Research Database (Denmark)

    Kouchaki, Alireza; Niroumand, Farideh Javidi; Haase, Frerk

    2015-01-01

    This paper presents an analytical method for designing the inductor of three-phase power factor correction converters (PFCs). The complex behavior of the inductor current complicates the inductor design procedure as well as the core loss and copper loss calculations. Therefore, this paper analyze...... to calculate the core loss in the PFC application. To investigate the impact of the dc link voltage level, two inductors for different dc voltage levels are designed and the results are compared.......This paper presents an analytical method for designing the inductor of three-phase power factor correction converters (PFCs). The complex behavior of the inductor current complicates the inductor design procedure as well as the core loss and copper loss calculations. Therefore, this paper analyzes...... circuit is used to provide the inductor current harmonic spectrum. Therefore, using the harmonic spectrum, the low and high frequency copper losses are calculated. The high frequency minor B-H loops in one switching cycle are also analyzed. Then, the loss map provided by the measurement setup is used...

  5. Using mixed methods effectively in prevention science: designs, procedures, and examples.

    Science.gov (United States)

    Zhang, Wanqing; Watanabe-Galloway, Shinobu

    2014-10-01

    There is growing interest in using a combination of quantitative and qualitative methods to generate evidence about the effectiveness of health prevention, services, and intervention programs. With the emerging importance of mixed methods research across the social and health sciences, there has been an increased recognition of the value of using mixed methods for addressing research questions in different disciplines. We illustrate the mixed methods approach in prevention research, showing design procedures used in several published research articles. In this paper, we focused on two commonly used mixed methods designs: concurrent and sequential mixed methods designs. We discuss the types of mixed methods designs, the reasons for, and advantages of using a particular type of design, and the procedures of qualitative and quantitative data collection and integration. The studies reviewed in this paper show that the essence of qualitative research is to explore complex dynamic phenomena in prevention science, and the advantage of using mixed methods is that quantitative data can yield generalizable results and qualitative data can provide extensive insights. However, the emphasis of methodological rigor in a mixed methods application also requires considerable expertise in both qualitative and quantitative methods. Besides the necessary skills and effective interdisciplinary collaboration, this combined approach also requires an open-mindedness and reflection from the involved researchers.

  6. Robust parameter design for integrated circuit fabrication procedure with respect to categorical characteristic

    International Nuclear Information System (INIS)

    Sohn, S.Y.

    1999-01-01

    We consider a robust parameter design of the process for forming contact windows in complementary metal-oxide semiconductor circuits. Robust design is often used to find the optimal levels of process conditions which would provide the output of consistent quality as close to a target value. In this paper, we analyze the results of the fractional factorial design of nine factors: mask dimension, viscosity, bake temperature, spin speed, bake time, aperture, exposure time, developing time, etch time, where the outcome of the experiment is measured in terms of a categorized window size with five categories. Random effect analysis is employed to model both the mean and variance of categorized window size as functions of some controllable factors as well as random errors. Empirical Bayes' procedures are then utilized to fit both the models, and to eventually find the robust design of CMOS circuit process by means of a Bootstrap resampling approach

  7. Tools and procedures for a “maintenance oriented” design for buildings of worship

    Directory of Open Access Journals (Sweden)

    Cinzia Talamo

    2013-10-01

    Full Text Available The paper describes the results, achieved in the first year, of a three years research dealing with the themes connected with the methods and the tools for planned maintenance and concerning the proposal of a system of supports for a design “maintenance oriented”. The starting hypothesis is that most of maintenance problems emerging during the life time of a building are due to a lack of attention towards the use phase that both clients and designers demonstrate. Starting from this point of view the aim of the research was to develop and to check a system of supports, useful both for clients and for designs of buildings of worship, consisting in guide lines, procedures and evaluation tools, graduate according to the different steps of design process and carried out in order to assume and to verify the requirement of maintainability.

  8. Robust parameter design for integrated circuit fabrication procedure with respect to categorical characteristic

    Energy Technology Data Exchange (ETDEWEB)

    Sohn, S.Y

    1999-12-01

    We consider a robust parameter design of the process for forming contact windows in complementary metal-oxide semiconductor circuits. Robust design is often used to find the optimal levels of process conditions which would provide the output of consistent quality as close to a target value. In this paper, we analyze the results of the fractional factorial design of nine factors: mask dimension, viscosity, bake temperature, spin speed, bake time, aperture, exposure time, developing time, etch time, where the outcome of the experiment is measured in terms of a categorized window size with five categories. Random effect analysis is employed to model both the mean and variance of categorized window size as functions of some controllable factors as well as random errors. Empirical Bayes' procedures are then utilized to fit both the models, and to eventually find the robust design of CMOS circuit process by means of a Bootstrap resampling approach.

  9. The guideline and practical procedures for earthquake-resistant design of nuclear power plants in Japan

    International Nuclear Information System (INIS)

    Watabe, M.

    1985-01-01

    The Guideline for the aseismic design of nuclear reactor facilities, revised in 1981, is introduced. The basic philosophy entails structural integrity against a major earthquake, rigid structure for less deformation and foundation on rock. The classification of facilities is then explained. Some practical examples are tabulated. In the light of the above classifications, evaluation procedures for aseismic design are defined. Design basis earthquake ground motions, S1 and S2, are defined. S1 is the maximum possible earthquake ground motion, while S2 is the maximum credible one. The relation between active faults and S1, S2 motions is explained, seismic forces induced by S1 and S2 are expressed in terms of response spectra. Static seismic coefficient procedures are also applied to evaluate seismic forces, as a minimum guide-line based on dynamic analysis. Combinations of seismic forces and allowable limits are then explained. In the second part of the paper, seismic analysis for reactor buildings as a part of design practice is outlined. There are three major key points in practical aseismic design. The first one is input design earthquake motions, in which soil/foundation interaction problems are also included. In practice, ground motions at the free field rock surface have to be convoluted or deconvoluted to obtain base rock motions, which are applied to estimate input design earthquake motions by way of finite element analysis or a lumped mass lattice model. Also introduced is dynamic modelling of the reactor building with its non-linear behaviour represented by plastic deformation of reinforced concrete members as well as by uplift characteristics of foundations. Then an evaluation of aseismic safety is introduced. (author)

  10. An Application of Graphical Approach to Construct Multiple Testing Procedure in a Hypothetical Phase III Design

    Directory of Open Access Journals (Sweden)

    Naitee eTing

    2014-01-01

    Full Text Available Many multiple testing procedures (MTP have been developed in recent years. Among these new procedures, the graphical approach is flexible and easy to communicate with non-statisticians. A hypothetical Phase III clinical trial design is introduced in this manuscript to demonstrate how graphical approach can be applied in clinical product development. In this design, an active comparator is used. It is thought that this test drug under development could potentially be superior to this comparator. For comparison of efficacy, the primary endpoint is well established and widely accepted by regulatory agencies. However, an important secondary endpoint based on Phase II findings looks very promising. The target dose may have a good opportunity to deliver superiority to the comparator. Furthermore, a lower dose is included in case the target dose may demonstrate potential safety concerns. This Phase III study is designed as a non-inferiority trial with two doses, and two endpoints. This manuscript will illustrate how graphical approach is applied to this design in handling multiple testing issues.

  11. Biosafety Procedure for Safe Handling of Genetically Modified Plant Materials in Bio Design Facility

    International Nuclear Information System (INIS)

    Zaiton Ahmad; Shuhaimi Shamsudin; Mohamed Najli Mohamed Yasin; Affrida Abu Hassan; Mohd Zaid Hassan; Rusli Ibrahim

    2015-01-01

    Bio Design Facility is the specifically designed glass house for propagation, screening and analysis of high quality plant varieties developed through biotechnology or a combination of nuclear technology and biotechnology. High quality plant varieties especially genetically modified plants (GMO) require a special glass house facility for propagation and screening to isolate them from cross-pollinating with wild type varieties in surrounding ecosystem, and for carrying out evaluation of possible risks of the plants to human, animal and environment before they are proven safe for field trials or commercial release. This facility which was developed under the Ninth Malaysia Plan is classified as the Plant Containment Level 2 and is compliance with the bio safety regulations and guidance for the safe release of GMO according to Malaysian Bio safety Act 2007. Bio Design Facility is fully operational since 2010 and in 2012, it has also been certified as the glass house for post-entry quarantine by The Department of Agriculture. This paper summarizes the bio safety procedure for a safe, controlled and contained growing and evaluation of GMO in Bio Design Facility. This procedure covers the physical (containment and equipment's) and operational (including responsibility, code of practice, growing, decontamination and disposal of plant materials, emergency and contingency plan) aspects of the facility. (author)

  12. Procedure for the design of Information Management Systems in Production Cooperatives

    Directory of Open Access Journals (Sweden)

    Maidelyn Díaz Pérez

    2018-02-01

    Full Text Available The information management systems of the entrepreneurial organizations have been conceived that the fulfillment of the strategic objectives depend to a large extent on the good performance of several informative tasks such as obtaining information from the environment, identifying and representing the information flows of the processes , the structuring of operational and functional data, the internal management of knowledge, etc. But in turn, the achievement of these actions depends on there being a group of procedures that lead to the adequate standardization of the data. In spite of the fact that these procedures are essential for the proper functioning of any system, and that, for the most part, the quality, reliability and pertinence of the information that is managed depends on them, it is not usual for them to exist in cooperative organizations. even in most cases they are not written. The objective of this research is to establish a procedure to design an information management system for research in a production cooperative linked directly to research. The result obtained allows identifying, defining and structuring the data required by the system to operate efficiently, as well as articulate the different components that should integrate it in its systemic development. This procedure facilitates the efficient management of operative, functional and strategic information of the different processes of a cooperative in correspondence with its strategic objectives.

  13. The oncologic outcome and immediate surgical complications of lipofilling in breast cancer patients: a multicenter study--Milan-Paris-Lyon experience of 646 lipofilling procedures.

    Science.gov (United States)

    Petit, Jean Yves; Lohsiriwat, Visnu; Clough, Krishna B; Sarfati, Isabelle; Ihrai, Tarik; Rietjens, Mario; Veronesi, Paolo; Rossetto, Fabio; Scevola, Anna; Delay, Emmanuel

    2011-08-01

    Lipofilling is now performed to improve the breast contour, after both breast-conserving surgery and breast reconstruction. However, injection of fat into a previous tumor site may create a new environment for cancer and adjacent cells. There is also no international agreement regarding lipofilling after breast cancer treatment. The authors included three institutions specializing in both breast cancer treatment and breast reconstruction (European Institute of Oncology, Milan, Italy; Paris Breast Center, Paris, France; and Leon Berard Centre, Lyon, France) for a multicenter study. A collective chart review of all lipofilling procedures after breast cancer treatment was performed. From 2000 to 2010, the authors reviewed 646 lipofilling procedures from 513 patients. There were 370 mastectomy patients and 143 breast-conserving surgery patients. There were 405 patients (78.9 percent) with invasive carcinoma and 108 (21.1 percent) with carcinoma in situ. The average interval between oncologic surgical interventions and lipofilling was 39.7 months. Average follow-up after lipofilling was 19.2 months. The authors observed a complication rate of 2.8 percent (liponecrosis, 2.0 percent). Twelve radiologic images appeared after lipofilling in 119 breast-conserving surgery cases (10.1 percent). The overall oncologic event rate was 5.6 percent (3.6 percent per year). The locoregional event rate was 2.4 percent (1.5 percent per year). Lipofilling after breast cancer treatment leads to a low complication rate and does not affect radiologic follow-up after breast-conserving surgery. A prospective clinical registry including high-volume multicenter data with a long follow-up is warranted to demonstrate the oncologic safety. Until then, lipofilling should be performed in experienced hands, and a cautious oncologic follow-up protocol is advised. Therapeutic, IV [corrected].

  14. Study on design procedure of three-dimensional building base isolation system using thick rubber bearing

    International Nuclear Information System (INIS)

    Yabana, Shuichi; Matsuda, Akihiro

    2003-01-01

    In this study, design procedure on three-dimensional base isolation system is developed. Base isolation system proposed by CRIEPI uses thick rubber bearing and damper as isolation device. As for thick rubber bearings, design formula for evaluating vertical stiffness is proposed, and design conditions regarding size and vertical pressure are investigated. Figure-U type lead damper is proposed as three-dimensional damper and by loading tests its mechanical characteristics is evaluated. The concept of multi-layered interconnected rubber bearing, which is advantageous over large scale bearing in manufacturability, is proposed and its good performance is confirmed by the loading test. Through the response analyses, it is shown the rocking response of the proposed three-dimensional base isolation system is very small and not influential to the system, and the reduction of the vertical response is attained using the proposed isolation device. (author)

  15. Surgical Assisting

    Science.gov (United States)

    ... instruction, including: Microbiology Pathophysiology Pharmacology Anatomy and physiology Medical terminology Curriculum . Course content includes: Advanced surgical anatomy Surgical microbiology Surgical pharmacology Anesthesia methods and agents Bioscience Ethical ...

  16. Breast-conservation treatment without any surgical procedure using new enzyme-targeting radiosensitization treatment for aged and/or op. refused patients with breast cancer

    International Nuclear Information System (INIS)

    Ogawa, Yasuhiro; Kubota, Kei; Miyatake, Kana

    2008-01-01

    We developed a new radiosensitizer containing hydrogen peroxide and sodium hyaluronate for topical tumor injection for various types of tumors, and the method was named KORTUC II (Kochi Oxydol-Radiation Therapy for Unresectable Carcinomas, Type II). KORTUC II trial was accepted by our local ethical committee concerning of the injection for advanced skin cancer, advanced bone/soft tissue malignant neoplasms, breast cancer of op refused or aged patients, and metastatic lymph nodes. Concerning breast cancer, ten patients were enrolled in the KORTUC II trial upon fully informed consent. All of them showed clinically complete response by the new enzyme-targeting radiosensitization treatment (KORTUC II) without any severe complications excluding mild dermatitis (grade I). Nine of the 10 patients have so far shown neither local recurrence nor distant metastasis, and the mean follow-up period at the end of December 2007 was still short and approximately 12 months. Especially for patients with breast cancer, breast-conservation treatment without any surgical procedure can be performed by using our new radiosensitizer for topical injection into the tumor tissue. (author)

  17. Galen-In-Use: using artificial intelligence terminology tools to improve the linguistic coherence of a national coding system for surgical procedures.

    Science.gov (United States)

    Rodrigues, J M; Trombert-Paviot, B; Baud, R; Wagner, J; Meusnier-Carriot, F

    1998-01-01

    GALEN has developed a language independent common reference model based on a medically oriented ontology and practical tools and techniques for managing healthcare terminology including natural language processing. GALEN-IN-USE is the current phase which applied the modelling and the tools to the development or the updating of coding systems for surgical procedures in different national coding centers co-operating within the European Federation of Coding Centre (EFCC) to create a language independent knowledge repository for multicultural Europe. We used an integrated set of artificial intelligence terminology tools named CLAssification Manager workbench to process French professional medical language rubrics into intermediate dissections and to the Grail reference ontology model representation. From this language independent concept model representation we generate controlled French natural language. The French national coding centre is then able to retrieve the initial professional rubrics with different categories of concepts, to compare the professional language proposed by expert clinicians to the French generated controlled vocabulary and to finalize the linguistic labels of the coding system in relation with the meanings of the conceptual system structure.

  18. Generic procedure for designing and implementing plan management systems for space science missions operations

    Science.gov (United States)

    Chaizy, P. A.; Dimbylow, T. G.; Allan, P. M.; Hapgood, M. A.

    2011-09-01

    This paper is one of the components of a larger framework of activities whose purpose is to improve the performance and productivity of space mission systems, i.e. to increase both what can be achieved and the cost effectiveness of this achievement. Some of these activities introduced the concept of Functional Architecture Module (FAM); FAMs are basic blocks used to build the functional architecture of Plan Management Systems (PMS). They also highlighted the need to involve Science Operations Planning Expertise (SOPE) during the Mission Design Phase (MDP) in order to design and implement efficiently operation planning systems. We define SOPE as the expertise held by people who have both theoretical and practical experience in operations planning, in general, and in space science operations planning in particular. Using ESA's methodology for studying and selecting science missions we also define the MDP as the combination of the Mission Assessment and Mission Definition Phases. However, there is no generic procedure on how to use FAMs efficiently and systematically, for each new mission, in order to analyse the cost and feasibility of new missions as well as to optimise the functional design of new PMS; the purpose of such a procedure is to build more rapidly and cheaply such PMS as well as to make the latter more reliable and cheaper to run. This is why the purpose of this paper is to provide an embryo of such a generic procedure and to show that the latter needs to be applied by people with SOPE during the MDP. The procedure described here proposes some initial guidelines to identify both the various possible high level functional scenarii, for a given set of possible requirements, and the information that needs to be associated with each scenario. It also introduces the concept of catalogue of generic functional scenarii of PMS for space science missions. The information associated with each catalogued scenarii will have been identified by the above procedure and

  19. Design procedure for pollutant loadings and impacts for highway stormwater runoff (Macintosh version) (for microcomputers). Software

    International Nuclear Information System (INIS)

    1990-01-01

    The interactive computer program was developed to make a user friendly procedure for the personal computer for calculations and guidance to make estimations of pollutant loadings and impacts from highway stormwater runoff which are presented in the Publication FHWA-RD-88-006, Pollutant Loadings and Impacts from Highway Stormwater Runoff, Volume I: Design Procedure. The computer program is for the evaluation of the water quality impact from highway stormwater runoff to a lake or a stream from a specific highway site considering the necessary rainfall data and geographic site situation. The evaluation considers whether or not the resulting water quality conditions can cause a problem as indicated by the violations of water quality criteria or objectives

  20. Design procedure for pollutant loadings and impacts for highway stormwater runoff (IBM version) (for microcomputers). Software

    International Nuclear Information System (INIS)

    1990-01-01

    The interactive computer program was developed to make a user friendly procedure for the personal computer for calculations and guidance to make estimations of pollutant loadings and impacts from highway stormwater runoff which are presented in the Publication FHWA-RD-88-006, Pollutant Loadings and Impacts from Highway Stormwater Runoff, Volume I: Design Procedure. The computer program is for the evaluation of the water quality impact from highway stormwater runoff to a lake or a stream from a specific highway site considering the necessary rainfall data and geographic site situation. The evaluation considers whether or not the resulting water quality conditions can cause a problem as indicated by the violations of water quality criteria or objectives

  1. Application of a statistical thermal design procedure to evaluate the PWR DNBR safety analysis limits

    International Nuclear Information System (INIS)

    Robeyns, J.; Parmentier, F.; Peeters, G.

    2001-01-01

    In the framework of safety analysis for the Belgian nuclear power plants and for the reload compatibility studies, Tractebel Energy Engineering (TEE) has developed, to define a 95/95 DNBR criterion, a statistical thermal design method based on the analytical full statistical approach: the Statistical Thermal Design Procedure (STDP). In that methodology, each DNBR value in the core assemblies is calculated with an adapted CHF (Critical Heat Flux) correlation implemented in the sub-channel code Cobra for core thermal hydraulic analysis. The uncertainties of the correlation are represented by the statistical parameters calculated from an experimental database. The main objective of a sub-channel analysis is to prove that in all class 1 and class 2 situations, the minimum DNBR (Departure from Nucleate Boiling Ratio) remains higher than the Safety Analysis Limit (SAL). The SAL value is calculated from the Statistical Design Limit (SDL) value adjusted with some penalties and deterministic factors. The search of a realistic value for the SDL is the objective of the statistical thermal design methods. In this report, we apply a full statistical approach to define the DNBR criterion or SDL (Statistical Design Limit) with the strict observance of the design criteria defined in the Standard Review Plan. The same statistical approach is used to define the expected number of rods experiencing DNB. (author)

  2. Development of multidisciplinary design optimization procedures for smart composite wings and turbomachinery blades

    Science.gov (United States)

    Jha, Ratneshwar

    Multidisciplinary design optimization (MDO) procedures have been developed for smart composite wings and turbomachinery blades. The analysis and optimization methods used are computationally efficient and sufficiently rigorous. Therefore, the developed MDO procedures are well suited for actual design applications. The optimization procedure for the conceptual design of composite aircraft wings with surface bonded piezoelectric actuators involves the coupling of structural mechanics, aeroelasticity, aerodynamics and controls. The load carrying member of the wing is represented as a single-celled composite box beam. Each wall of the box beam is analyzed as a composite laminate using a refined higher-order displacement field to account for the variations in transverse shear stresses through the thickness. Therefore, the model is applicable for the analysis of composite wings of arbitrary thickness. Detailed structural modeling issues associated with piezoelectric actuation of composite structures are considered. The governing equations of motion are solved using the finite element method to analyze practical wing geometries. Three-dimensional aerodynamic computations are performed using a panel code based on the constant-pressure lifting surface method to obtain steady and unsteady forces. The Laplace domain method of aeroelastic analysis produces root-loci of the system which gives an insight into the physical phenomena leading to flutter/divergence and can be efficiently integrated within an optimization procedure. The significance of the refined higher-order displacement field on the aeroelastic stability of composite wings has been established. The effect of composite ply orientations on flutter and divergence speeds has been studied. The Kreisselmeier-Steinhauser (K-S) function approach is used to efficiently integrate the objective functions and constraints into a single envelope function. The resulting unconstrained optimization problem is solved using the

  3. Computational Modelling in Development of a Design Procedure for Concrete Road

    Directory of Open Access Journals (Sweden)

    B. Novotný

    2000-01-01

    Full Text Available The computational modelling plays a decisive part in development of a new design procedure for concrete pavement by quantifying impacts of individual design factors. In the present paper, the emphasis is placed on the modelling of a structural response of the jointed concrete pavement as a system of interacting rectangular slabs transferring wheel loads into an elastic layered subgrade. The finite element plate analysis is combined with the assumption of a linear contact stress variation over triangular elements of the contact region division. The linking forces are introduced to model the load transfer across the joints. The unknown contact stress nodal intensities as well as unknown linking forces are determined in an iterative way to fulfil slab/foundation and slab/slab contact conditions. The temperature effects are also considered and space is reserved for modelling of inelastic and additional environmental effects. It is pointed out that pavement design should be based on full data of pavement stressing, in contradiction to procedures accounting only for the axle load induced stresses.

  4. The use of flow models for design of plant operating procedures

    International Nuclear Information System (INIS)

    Lind, M.

    1982-03-01

    The report describe a systematic approach to the design of operating procedures or sequence automatics for process plant control. It is shown how flow models representing the topology of mass and energy flows on different levels of function provide plant information which is important for the considered design problem. The modelling methodology leads to the definition of three categories of control tasks. Two tasks relate to the regulation and control of changes of levels and flows of mass and energy in a system within a defined mode of operation. The third type relate to the control actions necessary for switching operations involved in changes of operating mode. These control tasks are identified for a given plant as part of the flow modelling activity. It is discussed how the flow model deal with the problem of assigning control task precedence in time eg. during start-up or shut-down operations. The method may be a basis for providing automated procedure support to the operator in unforeseen situations or may be a tool for control design. (auth.)

  5. Mechanoluminescence assisting agile optimization of processing design on surgical epiphysis plates

    Science.gov (United States)

    Terasaki, Nao; Toyomasu, Takashi; Sonohata, Motoki

    2018-04-01

    We propose a novel method for agile optimization of processing design by visualization of mechanoluminescence. To demonstrate the effect of the new method, epiphysis plates were processed to form dots (diameters: 1 and 1.5 mm) and the mechanical information was evaluated. As a result, the appearance of new strain concentration was successfully visualized on the basis of mechanoluminescence, and complex mechanical information was instinctively understood by surgeons as the designers. In addition, it was clarified by mechanoluminescence analysis that small dots do not have serious mechanical effects such as strength reduction. Such detail mechanical information evaluated on the basis of mechanoluminescence was successfully applied to the judgement of the validity of the processing design. This clearly proves the effectiveness of the new methodology using mechanoluminescence for assisting agile optimization of the processing design.

  6. Application of a Monte Carlo procedure for probabilistic fatigue design of floating offshore wind turbines

    Directory of Open Access Journals (Sweden)

    K. Müller

    2018-03-01

    Full Text Available Fatigue load assessment of floating offshore wind turbines poses new challenges on the feasibility of numerical procedures. Due to the increased sensitivity of the considered system with respect to the environmental conditions from wind and ocean, the application of common procedures used for fixed-bottom structures results in either inaccurate simulation results or hard-to-quantify conservatism in the system design. Monte Carlo-based sampling procedures provide a more realistic approach to deal with the large variation in the environmental conditions, although basic randomization has shown slow convergence. Specialized sampling methods allow efficient coverage of the complete design space, resulting in faster convergence and hence a reduced number of required simulations. In this study, a quasi-random sampling approach based on Sobol sequences is applied to select representative events for the determination of the lifetime damage. This is calculated applying Monte Carlo integration, using subsets of a resulting total of 16 200 coupled time–domain simulations performed with the simulation code FAST. The considered system is the Danmarks Tekniske Universitet (DTU 10 MW reference turbine installed on the LIFES50+ OO-Star Wind Floater Semi 10 MW floating platform. Statistical properties of the considered environmental parameters (i.e., wind speed, wave height and wave period are determined based on the measurement data from the Gulf of Maine, USA. Convergence analyses show that it is sufficient to perform around 200 simulations in order to reach less than 10 % uncertainty of lifetime fatigue damage-equivalent loading. Complementary in-depth investigation is performed, focusing on the load sensitivity and the impact of outliers (i.e., values far away from the mean. Recommendations for the implementation of the proposed methodology in the design process are also provided.

  7. Evaluating procedural modelling for 3D models of informal settlements in urban design activities

    Directory of Open Access Journals (Sweden)

    Victoria Rautenbach

    2015-11-01

    Full Text Available Three-dimensional (3D modelling and visualisation is one of the fastest growing application fields in geographic information science. 3D city models are being researched extensively for a variety of purposes and in various domains, including urban design, disaster management, education and computer gaming. These models typically depict urban business districts (downtown or suburban residential areas. Despite informal settlements being a prevailing feature of many cities in developing countries, 3D models of informal settlements are virtually non-existent. 3D models of informal settlements could be useful in various ways, e.g. to gather information about the current environment in the informal settlements, to design upgrades, to communicate these and to educate inhabitants about environmental challenges. In this article, we described the development of a 3D model of the Slovo Park informal settlement in the City of Johannesburg Metropolitan Municipality, South Africa. Instead of using time-consuming traditional manual methods, we followed the procedural modelling technique. Visualisation characteristics of 3D models of informal settlements were described and the importance of each characteristic in urban design activities for informal settlement upgrades was assessed. Next, the visualisation characteristics of the Slovo Park model were evaluated. The results of the evaluation showed that the 3D model produced by the procedural modelling technique is suitable for urban design activities in informal settlements. The visualisation characteristics and their assessment are also useful as guidelines for developing 3D models of informal settlements. In future, we plan to empirically test the use of such 3D models in urban design projects in informal settlements.

  8. Abortion - surgical

    Science.gov (United States)

    Suction curettage; Surgical abortion; Elective abortion - surgical; Therapeutic abortion - surgical ... Surgical abortion involves dilating the opening to the uterus (cervix) and placing a small suction tube into the uterus. ...

  9. Avoiding thermal striping damage: Experimentally-based design procedures for high-cycle thermal fatigue

    International Nuclear Information System (INIS)

    Betts, C.; Judd, A.M.; Lewis, M.W.J.

    1994-01-01

    In the coolant circuits of a liquid metal cooled reactor (LMR), where there is turbulent mixing of coolant streams at different temperatures, there are temperature fluctuations in the fluid. If an item of the reactor structure is immersed in this fluid it will, because of the good heat transfer from the flowing liquid metal, experience surface temperature fluctuations which will induce dynamic surface strains. It is necessary to design the reactor so that these temperature fluctuations do not, over the life of the plant, cause damage. The purpose of this paper is to describe design procedures to prevent damage of this type. Two such procedures are given, one to prevent the initiation of defects in a nominally defect-free structure or to allow initiation only at the end of the component life, and the other to prevent significant growth of undetectable pre-existing defects of the order of 0.2 to 0.4 mm in depth. Experimental validation of these procedures is described, and the way they can be applied in practice is indicated. To set the scene the paper starts with a brief summary of cases in which damage of this type, or the need to avoid such damage, have had important effects on reactor operation. Structural damage caused by high-cycle thermal fatigue has had a significant adverse influence on the operation of LMRs on several occasions. It is necessary to eliminate the risk of such damage at the design stage. In the absence of detailed knowledge of the temperature history to which it will be subject, an LMR structure can be designed so that, if it is initially free of defects more than 0.1 mm deep, no such defects will be initiated by high-cycle fatigue. This can be done by ensuring that the maximum source temperature difference in the liquid metal is less than a limiting value, which depends on temperature. The limit is very low, however, and likely to be restrictive. This method, by virtue of its safety margin, takes into account pre-existing surface crack

  10. The TOMAX-procedure

    OpenAIRE

    Overgoor, M.L.E.

    2015-01-01

    Most patients with a low spinal lesion (LSL) have intact erectile function but no penile sensation, which can lead to frustration. To tackle this problem, we designed TOMAX, TOMAXimize sensation, sexuality and quality of life, a surgical procedure in which a functional "groin” nerve is connected to the non-functional “penile” nerve on one side to bypass the LSL. Our goal was to increase LSL patients’ sexual health by restoring penile sensation: we show that TOMAX can achieve dramatic improvem...

  11. Design of an X-band accelerating structure using a newly developed structural optimization procedure

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Xiaoxia [Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Fang, Wencheng; Gu, Qiang [Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800 (China); Zhao, Zhentang, E-mail: zhaozhentang@sinap.ac.cn [Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800 (China); University of Chinese Academy of Sciences, Beijing 100049 (China)

    2017-05-11

    An X-band high gradient accelerating structure is a challenging technology for implementation in advanced electron linear accelerator facilities. The present work discusses the design of an X-band accelerating structure for dedicated application to a compact hard X-ray free electron laser facility at the Shanghai Institute of Applied Physics, and numerous design optimizations are conducted with consideration for radio frequency (RF) breakdown, RF efficiency, short-range wakefields, and dipole/quadrupole field modes, to ensure good beam quality and a high accelerating gradient. The designed X-band accelerating structure is a constant gradient structure with a 4π/5 operating mode and input and output dual-feed couplers in a racetrack shape. The design process employs a newly developed effective optimization procedure for optimization of the X-band accelerating structure. In addition, the specific design of couplers providing high beam quality by eliminating dipole field components and reducing quadrupole field components is discussed in detail.

  12. Analysis and application of ratcheting evaluation procedure of Japanese high temperature design code DDS

    International Nuclear Information System (INIS)

    Lee, H. Y.; Kim, J. B.; Lee, J. H.

    2002-01-01

    In this study, the evaluation procedure of Japanese DDS code which was recently developed to assess the progressive inelastic deformation occurring under repetition of secondary stresses was analyzed and the evaluation results according to DDS was compared those of the thermal ratchet structural test carried out by KAERI to analyze the conservativeness of the code. The existing high temperature codes of US ASME-NH and French RCC-MR suggest the limited ratcheting procedures for only the load cases of cyclic secondary stresses under primary stresses. So they are improper to apply to the actual ratcheting problem which can occur under cyclic secondary membrane stresses due to the movement of hot free surface for the pool type LMR. DDS provides explicitly an analysis procedure of ratcheting due to moving thermal gradients near hot free surface. A comparison study was carried out between the results by the design code of DDS and by the structural test to investigate the conservativeness of DDS code, which showed that the evaluation results by DDS were in good agreement with those of the structural test

  13. Surgical stent for dental implant using cone beam CT images

    International Nuclear Information System (INIS)

    Choi, Hyung Soo; Kim, Gyu Tae; Choi, Yong Suk; Hwang, Eui Hwan

    2010-01-01

    The purpose of this study is to develop a surgical stent for dental implant procedure that can be easily applied and affordable by using cone beam computerized tomography (CBCT). Aluminum, Teflon-PFA (perfluoroalkoxy), and acetal (polyoxymethylene plastic) were selected as materials for the surgical stent. Among these three materials, the appropriate material was chosen using the CBCT images. The surgical stent, which could be easily placed into an oral cavity, was designed with chosen material. CBCT images of the new surgical stent on mandible were obtained using Alphard-3030 dental CT system (Asahi Roentgen Co., Ltd., Kyoto, Japan). The point of insertion was prescribed on the surgical stent with the multiplanar reconstruction software of OnDemand3D (CyberMed Inc., Seoul, Korea). Guide holes were made at the point of insertion on the surgical stent using newly designed guide jig. CBCT scans was taken for the second time to verify the accuracy of the newly designed surgical stent. Teflon-PFA showed radiologically excellent image characteristics for the surgical stent. High accuracy and reproducibility of implantation were confirmed with the surgical stent. The newly designed surgical stent can lead to the accurate implantation and achieve the clinically predictable result.

  14. A design procedure for a slotted waveguide with probe-fed slots radiating into plasma

    International Nuclear Information System (INIS)

    Colborn, J.A.

    1989-11-01

    A design procedure is developed for slotted-waveguide antennas with probe-fed slots. Radiation into a gyrotropic, plane-stratified medium is considered, nonzero waveguide wall thickness is assumed, and noncosinusoidal slot fields and arbitrary slot length up to about one free-space wavelength are allowed. External mutual coupling is taken into account by matching the tangential fields at the antenna surface. The particular case of longitudinal slots in the broad face of rectangular guide is analyzed. The motivation for this work is the design of such radiators for plasma heating and current-drive on thermonuclear fusion experiments, but some of the analysis is applicable to the probeless slotted waveguide used for avionics and communications. 20 refs., 5 figs

  15. The prepuce free flap in 10 patients : modifications in flap design and surgical technique

    NARCIS (Netherlands)

    Werker, Paul M N

    The prepuce free flap was used in 10 oral and oropharyngeal reconstructions. During the course of this study, various modifications took place. Residual penile skin necrosis and skin island necrosis early in the series led to modification of flap design. This solved the donor-site problem by placing

  16. Defining System Requirements: a critical assessment of the Niam conceptual design procedure

    Directory of Open Access Journals (Sweden)

    Peta Darke

    1995-05-01

    Full Text Available Requirements definition is a fundamental activity within information systems development. Social and organisational issues are at the centre of many of the problems experienced during the development and implementation of information systems, and these need to be explored during requirements definition. The NIAM Conceptual Schema Design Procedure (CSDP is a method for identifying and describing information requirements using fact types. This paper discusses some limitations of the information requirements definition step of the CSDP which result from its lack of focus on the socio-organisational dimension of information systems development. Four different approaches to exploring the socio-organisational contexts of systems are discussed. It is proposed that one of these, viewpoint development, be incorporated into the NIAM CSDP to provide a means of exploring and understanding a system's socio organisational context and to ensure that contextual information is a major input to the requirements definition process. This results in an enhanced design procedure. Future and current research areas are identified.

  17. Execution techniques for high level radioactive waste disposal. 4. Design and manufacturing procedure of engineered barriers

    International Nuclear Information System (INIS)

    Ogata, Nobuhide; Kosaki, Akio; Ueda, Hiroyoshi; Asano, Hidekazu; Takao, Hajime

    1999-01-01

    Ensuring the physical integrity of engineered barriers for an extremely long time period is necessary for geological disposal of high-level radioactive wastes. This report describes the design process and the designed configurations of both overpack and buffer as engineered barriers. Manufacturing procedure, quality control and inspection methods are also summarized. Carbon steel was selected as a structural material of the overpack and the specification of the overpack was determined assuming disposal in the depths of 1000 m below surface of crystalline rock site. The mixture of bentonite and sand (80% sodium bentonite and 20% silica sand by mass) was selected as material for a buffer from mainly its permeability and characteristics of self-sealing of a gap occurred in construction work. Welding method of a lid onto the main body of the overpack, uniting method of a corrosion-resistance layer and the structural component in the case of a composite overpack and manufacturing procedures of both blocks-type and monolithic-type buffers are also investigated. (author)

  18. A general U-block model-based design procedure for nonlinear polynomial control systems

    Science.gov (United States)

    Zhu, Q. M.; Zhao, D. Y.; Zhang, Jianhua

    2016-10-01

    The proposition of U-model concept (in terms of 'providing concise and applicable solutions for complex problems') and a corresponding basic U-control design algorithm was originated in the first author's PhD thesis. The term of U-model appeared (not rigorously defined) for the first time in the first author's other journal paper, which established a framework for using linear polynomial control system design approaches to design nonlinear polynomial control systems (in brief, linear polynomial approaches → nonlinear polynomial plants). This paper represents the next milestone work - using linear state-space approaches to design nonlinear polynomial control systems (in brief, linear state-space approaches → nonlinear polynomial plants). The overall aim of the study is to establish a framework, defined as the U-block model, which provides a generic prototype for using linear state-space-based approaches to design the control systems with smooth nonlinear plants/processes described by polynomial models. For analysing the feasibility and effectiveness, sliding mode control design approach is selected as an exemplary case study. Numerical simulation studies provide a user-friendly step-by-step procedure for the readers/users with interest in their ad hoc applications. In formality, this is the first paper to present the U-model-oriented control system design in a formal way and to study the associated properties and theorems. The previous publications, in the main, have been algorithm-based studies and simulation demonstrations. In some sense, this paper can be treated as a landmark for the U-model-based research from intuitive/heuristic stage to rigour/formal/comprehensive studies.

  19. Tailoring groundwater quality monitoring to vulnerability: a GIS procedure for network design.

    Science.gov (United States)

    Preziosi, E; Petrangeli, A B; Giuliano, G

    2013-05-01

    Monitoring networks aiming to assess the state of groundwater quality and detect or predict changes could increase in efficiency when fitted to vulnerability and pollution risk assessment. The main purpose of this paper is to describe a methodology aiming at integrating aquifers vulnerability and actual levels of groundwater pollution in the monitoring network design. In this study carried out in a pilot area in central Italy, several factors such as hydrogeological setting, groundwater vulnerability, and natural and anthropogenic contamination levels were analyzed and used in designing a network tailored to the monitoring objectives, namely, surveying the evolution of groundwater quality relating to natural conditions as well as to polluting processes active in the area. Due to the absence of an aquifer vulnerability map for the whole area, a proxi evaluation of it was performed through a geographic information system (GIS) methodology, leading to the so called "susceptibility to groundwater quality degradation". The latter was used as a basis for the network density assessment, while water points were ranked by several factors including discharge, actual contamination levels, maintenance conditions, and accessibility for periodical sampling in order to select the most appropriate to the network. Two different GIS procedures were implemented which combine vulnerability conditions and water points suitability, producing two slightly different networks of 50 monitoring points selected out of the 121 candidate wells and springs. The results are compared with a "manual" selection of the points. The applied GIS procedures resulted capable to select the requested number of water points from the initial set, evaluating the most confident ones and an appropriate density. Moreover, it is worth underlining that the second procedure (point distance analysis [PDA]) is technically faster and simpler to be performed than the first one (GRID + PDA).

  20. Design Engineering in Surgery. How to Design, Test and Market Surgical Devices Made With 3D Printing?

    Science.gov (United States)

    Rodríguez García, José Ignacio; Sierra Velasco, José Manuel; Villazón Suárez, Marta; Cabrera Pereira, Ana; Sosa, Valentina; Cortizo Rodríguez, José Luis

    2018-04-01

    Industry 4.0 offers new development opportunities for surgeons. Computer-aided design and 3D printing allow for the creation of prototypes and functional end products. Until now, it was difficult for new devices to get to the manufacturing phase. Nowadays, the main limitations are our creativity, available spaces to test our creations and obtaining financing. Copyright © 2018 AEC. Publicado por Elsevier España, S.L.U. All rights reserved.

  1. Comparing open and minimally invasive surgical procedures for oesophagectomy in the treatment of cancer: the ROMIO (Randomised Oesophagectomy: Minimally Invasive or Open) feasibility study and pilot trial.

    Science.gov (United States)

    Metcalfe, Chris; Avery, Kerry; Berrisford, Richard; Barham, Paul; Noble, Sian M; Fernandez, Aida Moure; Hanna, George; Goldin, Robert; Elliott, Jackie; Wheatley, Timothy; Sanders, Grant; Hollowood, Andrew; Falk, Stephen; Titcomb, Dan; Streets, Christopher; Donovan, Jenny L; Blazeby, Jane M

    2016-06-01

    Localised oesophageal cancer can be curatively treated with surgery (oesophagectomy) but the procedure is complex with a risk of complications, negative effects on quality of life and a recovery period of 6-9 months. Minimal-access surgery may accelerate recovery. The ROMIO (Randomised Oesophagectomy: Minimally Invasive or Open) study aimed to establish the feasibility of, and methodology for, a definitive trial comparing minimally invasive and open surgery for oesophagectomy. Objectives were to quantify the number of eligible patients in a pilot trial; develop surgical manuals as the basis for quality assurance; standardise pathological processing; establish a method to blind patients to their allocation in the first week post surgery; identify measures of postsurgical outcome of importance to patients and clinicians; and establish the main cost differences between the surgical approaches. Pilot parallel three-arm randomised controlled trial nested within feasibility work. Two UK NHS departments of upper gastrointestinal surgery. Patients aged ≥ 18 years with histopathological evidence of oesophageal or oesophagogastric junctional adenocarcinoma, squamous cell cancer or high-grade dysplasia, referred for oesophagectomy or oesophagectomy following neoadjuvant chemo(radio)therapy. Oesophagectomy, with patients randomised to open surgery, a hybrid open chest and minimally invasive abdomen or totally minimally invasive access. The primary outcome measure for the pilot trial was the number of patients recruited per month, with the main trial considered feasible if at least 2.5 patients per month were recruited. During 21 months of recruitment, 263 patients were assessed for eligibility; of these, 135 (51%) were found to be eligible and 104 (77%) agreed to participate, an average of five patients per month. In total, 41 patients were allocated to open surgery, 43 to the hybrid procedure and 20 to totally minimally invasive surgery. Recruitment is continuing

  2. Seasonal Variations in the Risk of Reoperation for Surgical Site Infection Following Elective Spinal Fusion Surgery: A Retrospective Study Using the Japanese Diagnosis Procedure Combination Database.

    Science.gov (United States)

    Ohya, Junichi; Chikuda, Hirotaka; Oichi, Takeshi; Kato, So; Matsui, Hiroki; Horiguchi, Hiromasa; Tanaka, Sakae; Yasunaga, Hideo

    2017-07-15

    A retrospective study of data abstracted from the Diagnosis Procedure Combination (DPC) database, a national representative database in Japan. The aim of this study was to examine seasonal variations in the risk of reoperation for surgical site infection (SSI) following spinal fusion surgery. Although higher rates of infection in the summer than in other seasons were thought to be caused by increasing inexperience of new staff, high temperature, and high humidity, no studies have examined seasonal variations in the risk of SSI following spinal fusion surgery in the country where medical staff rotation timing is not in summer season. In Japan, medical staff rotation starts in April. We retrospectively extracted the data of patients who were admitted between July 2010 and March 2013 from the DPC database. Patients were included if they were aged 20 years or older and underwent elective spinal fusion surgery. The primary outcome was reoperation for SSI during hospitalization. We performed multivariate analysis to clarify the risk factors of primary outcome with adjustment for patient background characteristics. We identified 47,252 eligible patients (23,659 male, 23,593 female). The mean age of the patients was 65.4 years (range, 20-101 yrs). Overall, reoperation for SSI occurred in 0.93% of the patients during hospitalization. The risk of reoperation for SSI was significantly higher in April (vs. February; odds ratio, 1.93; 95% confidence interval, 1.09-3.43, P = 0.03) as well as other known risk factors. In subgroup analysis with stratification for type of hospital, month of surgery was identified as an independent risk factor of reoperation for SSI among cases in an academic hospital, although there was no seasonal variation among those in a nonacademic hospital. This study showed that month of surgery is a risk factor of reoperation for SSI following elective spinal fusion surgery, nevertheless, in the country where medical staff rotation timing is not in

  3. POEM is a cost-effective procedure: cost-utility analysis of endoscopic and surgical treatment options in the management of achalasia.

    Science.gov (United States)

    Miller, Heidi J; Neupane, Ruel; Fayezizadeh, Mojtaba; Majumder, Arnab; Marks, Jeffrey M

    2017-04-01

    Achalasia is a rare motility disorder of the esophagus. Treatment is palliative with the goal of symptom remission and slowing the progression of the disease. Treatment options include per oral endoscopic myotomy (POEM), laparoscopic Heller myotomy (LM) and endoscopic treatments such as pneumatic dilation (PD) and botulinum toxin type A injections (BI). We evaluate the economics and cost-effectiveness of treating achalasia. We performed cost analysis for POEM, LM, PD and BI at our institution from 2011 to 2015. Cost of LM was set to 1, and other procedures are presented as percentage change. Cost-effectiveness was calculated based on cost, number of interventions required for optimal results for dilations and injections and efficacy reported in the current literature. Incremental cost-effectiveness ratio was calculated by a cost-utility analysis using quality-adjusted life year gained, defined as a symptom-free year in a patient with achalasia. Average number of interventions required was 2.3 dilations or two injections for efficacies of 80 and 61 %, respectively. POEM cost 1.058 times the cost of LM, and PD and BI cost 0.559 and 0.448 times the cost of LM. Annual cost per cure over a period of 4 years for POEM, and LM were consistently equivalent, trending the same as PD although this has a lower initial cost. The cost per cure of BI remains stable over 3 years and then doubles. The cost-effectiveness of POEM and LM is equivalent. Myotomy, either surgical or endoscopic, is more cost-effective than BI due to high failure rates of the economical intervention. When treatment is being considered BI should be utilized in patients with less than 2-year life expectancy. Pneumatic dilations are cost-effective and are an acceptable approach to treatment of achalasia, although myotomy has a lower relapse rate and is cost-effective compared to PD after 2 years.

  4. Potency following high-dose three-dimensional conformal radiotherapy and the impact of prior major urologic surgical procedures in patients treated for prostate cancer

    International Nuclear Information System (INIS)

    Chinn, Daniel M.; Holland, John; Crownover, Richard L.; Roach, Mack

    1995-01-01

    Purpose: To assess the impact of high-dose three-dimensional conformal radiotherapy (3DCRT) on potency in patients treated for clinically localized prostate cancer and to identify factors that might predict the outcome of sexual function following treatment. Methods and Materials: One hundred twenty-four consecutive patients treated with 3DCRT for localized prostate cancer at UCSF between 1991-1993 were included in this retrospective analysis. Patient responses were obtained from a mailed questionnaire, telephone interviews, or departmental records. Median follow-up was 21 months. Results: Sixty patients reported having sexual function prior to 3DCRT, including 47 who were fully potent and 13 who were marginally potent. Of the remaining 64 patients, 45 were impotent, 7 were on hormones, 1 was status-postorchiectomy, and 11 were not evaluable. Following 3DCRT, 37 of 60 patients (62%) retained sexual function sufficient for intercourse. Of those with sexual function before irradiation, 33 of 47 (70%) of patients fully potent and 4 of 13 (31%) of patients marginally potent maintained function sufficient for intercourse (p < 0.01). Potency was retained in 6 of 15 (40%) patients with a history of a major urologic surgical procedure (MUSP) and in 31 of 45 (69%) with no history of a MUSP (p < 0.04). Transurethral resection of the prostate was the MUSP in eight of these patients, with four (50%) maintaining sexual function. Conclusions: Patients who receive definitive 3DCRT for localized prostate cancer appear to maintain potency similar to patients treated with conventional radiotherapy. However, patients who are marginally potent at presentation or who have a history of a MUSP appear to be at increased risk of impotence following 3DCRT

  5. How Much Will My Child's Operation Cost? Availability of Consumer Prices From US Hospitals for a Common Pediatric Orthopaedic Surgical Procedure.

    Science.gov (United States)

    Racimo, Allison R; Talathi, Nakul S; Zelenski, Nicole A; Wells, Lawrence; Shah, Apurva S

    2018-05-02

    Price transparency allows patients to make value-based health care decisions and is particularly important for individuals who are uninsured or enrolled in high-deductible health care plans. The availability of consumer prices for children undergoing orthopaedic surgery has not been previously investigated. We aimed to determine the availability of price estimates from hospitals in the United States for an archetypal pediatric orthopaedic surgical procedure (closed reduction and percutaneous pinning of a distal radius fracture) and identify variations in price estimates across hospitals. This prospective investigation utilized a scripted telephone call to obtain price estimates from 50 "top-ranked hospitals" for pediatric orthopaedics and 1 "non-top-ranked hospital" from each state and the District of Columbia. Price estimates were requested using a standardized script, in which an investigator posed as the mother of a child with a displaced distal radius fracture that needed closed reduction and pinning. Price estimates (complete or partial) were recorded for each hospital. The number of calls and the duration of time required to obtain the pricing information was also recorded. Variation was assessed, and hospitals were compared on the basis of ranking, teaching status, and region. Less than half (44%) of the 101 hospitals provided a complete price estimate. The mean price estimate for top-ranked hospitals ($17,813; range, $2742 to $49,063) was 50% higher than the price estimate for non-top-ranked hospitals ($11,866; range, $3623 to $22,967) (P=0.020). Differences in price estimates were attributable to differences in hospital fees (P=0.003), not surgeon fees. Top-ranked hospitals required more calls than non-top-ranked hospitals (4.4±2.9 vs. 2.8±2.3 calls, P=0.003). A longer duration of time was required to obtain price estimates from top-ranked hospitals than from non-top-ranked hospitals (8.2±9.4 vs. 4.1±5.1 d, P=0.024). Price estimates for pediatric

  6. Total mandibular subapical osteotomy and Le Fort I osteotomy using piezosurgery and computer-aided designed and manufactured surgical splints: a favorable combination of three techniques in the management of severe mouth asymmetry in Parry-Romberg syndrome.

    Science.gov (United States)

    Scolozzi, Paolo; Herzog, Georges

    2014-05-01

    Although its pathogenesis remains obscure, Parry-Romberg syndrome (PRS) has been associated with the linear scleroderma en coup de sabre. PRS is characterized by unilateral facial atrophy of the skin, subcutaneous tissue, muscles, and bones with at least 1 dermatome supplied by the trigeminal nerve. Facial asymmetry represents the most common sequela and can involve the soft tissues, craniomaxillofacial skeleton, dentoalveolar area, and temporomandibular joint. Although orthognathic procedures have been reported for skeletal reconstruction, treatment of facial asymmetry has been directed to augmentation of the soft tissue volume on the atrophic side using different recontouring or volumetric augmentation techniques. Total mandibular subapical osteotomy has been used in the management of dentofacial deformities, such as open bite and mandibular dentoalveolar retrusion or protrusion associated with an imbalance between the lower lip and the chin. Management of orthognathic procedures has been improved by the recent introduction of stereolithographic surgical splints using computer-aided design (CAD) and computer-aided manufacturing (CAM) technology and piezosurgery. Piezosurgery has increased security during surgery, especially for delicate procedures associated with a high risk of nerve injury. The present report describes a combined total mandibular subapical osteotomy and Le Fort I osteotomy using piezosurgery and surgical splints fabricated using CAD and CAM for the correction of severe mouth asymmetry related to vertical dentoalveolar disharmony in a patient with PRS. Copyright © 2014 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  7. Judicial problems in connection with preliminary decision and construction design approval in nuclear licensing procedures

    International Nuclear Information System (INIS)

    Schmieder, K.

    1977-01-01

    Standardization in nuclear engineering makes two demands on a legal instrument which is to make this standardization possible and which is to promote standardization in the nuclear licensing practice: On the basis of just one licence for a constructional part or a component, its applicability in any number of subsequent facility licensing procedures has to be warranted, and by virtue of its binding effect, standardization has to create a sufficiently big confidence protection with manufacturers, constructioneers and operators to offer sufficiently effective incentives for standardization. The nuclear preliminary decision pursuant to section 7 a of the Atomic Energy Act in the form of the component preliminary decision appears to be unsuitable as a legal instrument for standardization, as the preliminary decision refers exclusively to the construction of a concrete facility. For standardization in reactor engineering, the construction design approval appears to be basically the proper legal instrument on account of its legal structure as well as its economic effect. Its binding effect encouters a limitation with regard to third parties in so far that this limitation could question again the binding effect in a subsequent site-dependent nuclear licence procedure. The legal structure of the extent of the binding effect, which is decisive for the suitability of the construction design approval, lies with the legislator. The following questions have to be regulated: Ought the applicant to have a legal claim on the granting of a construction design approval, or ought it to be at the discretion of the authorities, and secondly, the extent of the binding effect in terms of time on the basis of the fixation of a time limit, or on the basis of the possibility of subsequent conditions to be imposed, or the revocation. (orig./HP) [de

  8. Hardware Design and Implementation of a Wavelet De-Noising Procedure for Medical Signal Preprocessing

    Directory of Open Access Journals (Sweden)

    Szi-Wen Chen

    2015-10-01

    Full Text Available In this paper, a discrete wavelet transform (DWT based de-noising with its applications into the noise reduction for medical signal preprocessing is introduced. This work focuses on the hardware realization of a real-time wavelet de-noising procedure. The proposed de-noising circuit mainly consists of three modules: a DWT, a thresholding, and an inverse DWT (IDWT modular circuits. We also proposed a novel adaptive thresholding scheme and incorporated it into our wavelet de-noising procedure. Performance was then evaluated on both the architectural designs of the software and. In addition, the de-noising circuit was also implemented by downloading the Verilog codes to a field programmable gate array (FPGA based platform so that its ability in noise reduction may be further validated in actual practice. Simulation experiment results produced by applying a set of simulated noise-contaminated electrocardiogram (ECG signals into the de-noising circuit showed that the circuit could not only desirably meet the requirement of real-time processing, but also achieve satisfactory performance for noise reduction, while the sharp features of the ECG signals can be well preserved. The proposed de-noising circuit was further synthesized using the Synopsys Design Compiler with an Artisan Taiwan Semiconductor Manufacturing Company (TSMC, Hsinchu, Taiwan 40 nm standard cell library. The integrated circuit (IC synthesis simulation results showed that the proposed design can achieve a clock frequency of 200 MHz and the power consumption was only 17.4 mW, when operated at 200 MHz.

  9. Hardware design and implementation of a wavelet de-noising procedure for medical signal preprocessing.

    Science.gov (United States)

    Chen, Szi-Wen; Chen, Yuan-Ho

    2015-10-16

    In this paper, a discrete wavelet transform (DWT) based de-noising with its applications into the noise reduction for medical signal preprocessing is introduced. This work focuses on the hardware realization of a real-time wavelet de-noising procedure. The proposed de-noising circuit mainly consists of three modules: a DWT, a thresholding, and an inverse DWT (IDWT) modular circuits. We also proposed a novel adaptive thresholding scheme and incorporated it into our wavelet de-noising procedure. Performance was then evaluated on both the architectural designs of the software and. In addition, the de-noising circuit was also implemented by downloading the Verilog codes to a field programmable gate array (FPGA) based platform so that its ability in noise reduction may be further validated in actual practice. Simulation experiment results produced by applying a set of simulated noise-contaminated electrocardiogram (ECG) signals into the de-noising circuit showed that the circuit could not only desirably meet the requirement of real-time processing, but also achieve satisfactory performance for noise reduction, while the sharp features of the ECG signals can be well preserved. The proposed de-noising circuit was further synthesized using the Synopsys Design Compiler with an Artisan Taiwan Semiconductor Manufacturing Company (TSMC, Hsinchu, Taiwan) 40 nm standard cell library. The integrated circuit (IC) synthesis simulation results showed that the proposed design can achieve a clock frequency of 200 MHz and the power consumption was only 17.4 mW, when operated at 200 MHz.

  10. Combining Latin Hypercube Designs and Discrete Event Simulation in a Study of a Surgical Unit

    DEFF Research Database (Denmark)

    Dehlendorff, Christian; Andersen, Klaus Kaae; Kulahci, Murat

    Summary form given only:In this article experiments on a discrete event simulation model for an orthopedic surgery are considered. The model is developed as part of a larger project in co-operation with Copenhagen University Hospital in Gentofte. Experiments on the model are performed by using...... Latin hypercube designs. The parameter set consists of system settings such as use of preparation room for sedation and the number of operating rooms, as well as management decisions such as staffing, size of the recovery room and the number of simultaneously active operating rooms. Sensitivity analysis...... and optimization combined with meta-modeling are employed in search for optimal setups. The primary objective in this article is to minimize time spent by the patients in the system. The overall long-term objective for the orthopedic surgery unit is to minimize time lost during the pre- and post operation...

  11. A novel gait-based synthesis procedure for the design of 4-bar exoskeleton with natural trajectories

    Directory of Open Access Journals (Sweden)

    Ramanpreet Singh

    2018-01-01

    The Translational Potential of this Article: Many hospitals and individuals have used the immobile and portable rehabilitation devices. These devices involve mechanisms, and the design of mechanism plays a vital role in the functioning of these devices; therefore, we have developed a new synthesis procedure for the design of the mechanism. Besides synthesis procedure, a mechanism is developed that can be used in the rehabilitation devices, bipeds, exoskeletons, etc., to benefit the society.

  12. HIGH QUALITY ENVIRONMENTAL PRINCIPLES APPLIED TO THE ARCHITECTONIC DESIGN SELECTION PROCEDURE: THE NUTRE LAB CASE

    Directory of Open Access Journals (Sweden)

    Claudia Barroso Krause

    2012-06-01

    Full Text Available The need to produce more sustainable buildings has been influencing the design decisions all over the world. That’s why it is imperative, in Brazil, the