3D printing of surgical instruments for long-duration space missions.

Science.gov (United States)

Wong, Julielynn Y; Pfahnl, Andreas C

2014-07-01

The first off-Earth fused deposition modeling (FDM) 3D printer will explore thermoplastic manufacturing capabilities in microgravity. This study evaluated the feasibility of FDM 3D printing 10 acrylonitrile butadiene styrene (ABS) thermoplastic surgical instruments on Earth. Three-point bending tests compared stiffness and yield strength between FDM 3D printed and conventionally manufactured ABS thermoplastic. To evaluate the relative speed of using four printed instruments compared to conventional instruments, 13 surgeons completed simulated prepping, draping, incising, and suturing tasks. Each surgeon ranked the performance of six printed instruments using a 5-point Likert scale. At a thickness of 5.75 mm or more, the FDM printing process had a less than 10% detrimental effect on the tested yield strength and stiffness of horizontally printed ABS thermoplastic relative to conventional ABS thermoplastic. Significant weakness was observed when a bending load was applied transversely to a 3D printed layer. All timed tasks were successfully performed using a printed sponge stick, towel clamp, scalpel handle, and toothed forceps. There was no substantial difference in time to completion of simulated surgical tasks with control vs. 3D printed instruments. Of the surgeons, 100%, 92%, 85%, 77%, 77%, and 69% agreed that the printed smooth and tissue forceps, curved and straight hemostats, tissue and right angle clamps, respectively, would perform adequately. It is feasible to 3D print ABS thermoplastic surgical instruments on Earth. Loadbearing structures were designed to be thicker, when possible. Printing orientations were selected so that the printing layering direction of critical structures would not be transverse to bending loads.

Research on seamless development of surgical instruments based on biological mechanisms using CAD and 3D printer.

Science.gov (United States)

Yamamoto, Ikuo; Ota, Ren; Zhu, Rui; Lawn, Murray; Ishimatsu, Takakazu; Nagayasu, Takeshi; Yamasaki, Naoya; Takagi, Katsunori; Koji, Takehiko

2015-01-01

In the area of manufacturing surgical instruments, the ability to rapidly design, prototype and test surgical instruments is critical. This paper provides a simple case study of the rapid development of two bio-mechanism based surgical instruments which are ergonomic, aesthetic and were successfully designed, prototyped and conceptually tested in a very short period of time.

The history of thoracic surgical instruments and instrumentation.

Science.gov (United States)

Hagopian, E J; Mann, C; Galibert, L A; Steichen, F M

2000-02-01

Thoracic surgical practice has evolved from the innovations of its pioneers. Beginning with the stethoscope discovered by Laënnec with his system of auscultation, to the tools we use in the dissection and control of the hilum of the lung for resection, our practice of thoracic surgery has been entwined with the development of instruments and instrumentation. The development of strategies to prevent death from the open pneumothorax began with manual control of the mediastinum and progressed through differential pressure to, finally, the technique of intubation and the methods of positive-pressure and insufflation anesthesia. The instruments we place in our hands are not enough to define our art. Entry into the chest would not be possible without the use of rib retractors, rib shears, and even periosteal elevators. Finally, to the present day of minimally invasive techniques and the application of thoracoscopy for therapeutic purposes, we find the efforts of our predecessors well developed. For the progression from the fear of the open pneumothorax to the present-day state of the ease of thoracotomy for lung resection we are indebted to those who gave so much of their time and, for some, their lives to death from tuberculosis, to allow the advancement of our practice of surgery. These great people should be remembered not only for their acceptance of novel ideas but also, more importantly, for their lack of fear of testing them.

Factors determining the potential for onward transmission of variant Creutzfeldt–Jakob disease via surgical instruments

Science.gov (United States)

Garske, Tini; Ward, Hester J.T; Clarke, Paul; Will, Robert G; Ghani, Azra C

2006-01-01

While the number of variant Creutzfeldt–Jakob disease (vCJD) cases continues to decline, concern has been raised that transmission could occur directly from one person to another through routes including the transfer of blood and shared use of surgical instruments. Here we firstly present data on the surgical procedures undertaken on vCJD patients prior to onset of clinical symptoms, which supports the hypothesis that cases via this route are possible. We then apply a mathematical framework to assess the potential for self-sustaining epidemics via surgical procedures. Data from hospital episode statistics on the rates of high- and medium-risk procedures in the UK were used to estimate model parameters, and sensitivity to other unknown parameters about surgically transmitted vCJD was assessed. Our results demonstrate that a key uncertainty determining the scale of an epidemic and whether it is self-sustaining is the number of times a single instrument is re-used, alongside the infectivity of contaminated instruments and the effectiveness of cleaning. A survey into the frequency of re-use of surgical instruments would help reduce these uncertainties. PMID:17015298

Automatic localization of the da Vinci surgical instrument tips in 3-D transrectal ultrasound.

Science.gov (United States)

Mohareri, Omid; Ramezani, Mahdi; Adebar, Troy K; Abolmaesumi, Purang; Salcudean, Septimiu E

2013-09-01

Robot-assisted laparoscopic radical prostatectomy (RALRP) using the da Vinci surgical system is the current state-of-the-art treatment option for clinically confined prostate cancer. Given the limited field of view of the surgical site in RALRP, several groups have proposed the integration of transrectal ultrasound (TRUS) imaging in the surgical workflow to assist with accurate resection of the prostate and the sparing of the neurovascular bundles (NVBs). We previously introduced a robotic TRUS manipulator and a method for automatically tracking da Vinci surgical instruments with the TRUS imaging plane, in order to facilitate the integration of intraoperative TRUS in RALRP. Rapid and automatic registration of the kinematic frames of the da Vinci surgical system and the robotic TRUS probe manipulator is a critical component of the instrument tracking system. In this paper, we propose a fully automatic registration technique based on automatic 3-D TRUS localization of robot instrument tips pressed against the air-tissue boundary anterior to the prostate. The detection approach uses a multiscale filtering technique to identify and localize surgical instrument tips in the TRUS volume, and could also be used to detect other surface fiducials in 3-D ultrasound. Experiments have been performed using a tissue phantom and two ex vivo tissue samples to show the feasibility of the proposed methods. Also, an initial in vivo evaluation of the system has been carried out on a live anaesthetized dog with a da Vinci Si surgical system and a target registration error (defined as the root mean square distance of corresponding points after registration) of 2.68 mm has been achieved. Results show this method's accuracy and consistency for automatic registration of TRUS images to the da Vinci surgical system.

Surgical site infections following instrumented stabilization of the spine

Directory of Open Access Journals (Sweden)

Dapunt U

2017-09-01

Full Text Available Ulrike Dapunt,1 Caroline Bürkle,1 Frank Günther,2 Wojciech Pepke,1 Stefan Hemmer,1 Michael Akbar1 1Clinic for Orthopedics and Trauma Surgery, Center for Orthopedics, Trauma Surgery and Spinal Cord Injury, Heidelberg University Hospital, 2Department for Infectious Diseases, Medical Microbiology and Hygiene, Heidelberg University, Heidelberg, Germany Background: Implant-associated infections are still a feared complication in the field of orthopedics. Bacteria attach to the implant surface and form so-called biofilm colonies that are often difficult to diagnose and treat. Since the majority of studies focus on prosthetic joint infections (PJIs of the hip and knee, current treatment options (eg, antibiotic prophylaxis of implant-associated infections have mostly been adapted according to these results. Objective: The aim of this study was to evaluate patients with surgical site infections following instrumented stabilization of the spine with regard to detected bacteria species and the course of the disease. Patients and methods: We performed a retrospective single-center analysis of implant-associated infections of the spine from 2010 to 2014. A total of 138 patients were included in the study. The following parameters were evaluated: C-reactive protein serum concentration, microbiological evaluation of tissue samples, the time course of the disease, indication for instrumented stabilization of the spine, localization of the infection, and the number of revision surgeries required until cessation of symptoms. Results: Coagulase-negative Staphylococcus spp. were most commonly detected (n=69, 50%, followed by fecal bacteria (n=46, 33.3%. In 23.2% of cases, no bacteria were detected despite clinical suspicion of an infection. Most patients suffered from degenerative spine disorders (44.9%, followed by spinal fractures (23.9%, non-degenerative scoliosis (20.3%, and spinal tumors (10.1%. Surgical site infections occurred predominantly within 3

Endoscopic vision-based tracking of multiple surgical instruments during robot-assisted surgery.

Science.gov (United States)

Ryu, Jiwon; Choi, Jaesoon; Kim, Hee Chan

2013-01-01

Robot-assisted minimally invasive surgery is effective for operations in limited space. Enhancing safety based on automatic tracking of surgical instrument position to prevent inadvertent harmful events such as tissue perforation or instrument collisions could be a meaningful augmentation to current robotic surgical systems. A vision-based instrument tracking scheme as a core algorithm to implement such functions was developed in this study. An automatic tracking scheme is proposed as a chain of computer vision techniques, including classification of metallic properties using k-means clustering and instrument movement tracking using similarity measures, Euclidean distance calculations, and a Kalman filter algorithm. The implemented system showed satisfactory performance in tests using actual robot-assisted surgery videos. Trajectory comparisons of automatically detected data and ground truth data obtained by manually locating the center of mass of each instrument were used to quantitatively validate the system. Instruments and collisions could be well tracked through the proposed methods. The developed collision warning system could provide valuable information to clinicians for safer procedures. © 2012, Copyright the Authors. Artificial Organs © 2012, International Center for Artificial Organs and Transplantation and Wiley Periodicals, Inc.

[Composite digital allotransplants: surgical technique and different applications].

Science.gov (United States)

Casoli, V; Rousvoal, A; Zirak, C; Bakhach, J; Guimberteau, J-C

2007-10-01

Microsurgery and human allotransplantation progress as well as the improvement of immunosuppressive drugs actually allow the development of the composite tissue allotransplantation. One of the latest challenges in plastic surgery is to restore the anatomic and functional structures using similar tissues. Composite tissue allotransplantation will probably reach this goal. Our work is to find new surgical techniques for the reconstruction of the osteotendinous apparatus of the long digits. In this paper, we will demonstrate the surgical technique to harvest the allotransplant and its modulation in the reconstruction of various digital defects.

Instrument-mounted displays for reducing cognitive load during surgical navigation.

Science.gov (United States)

Herrlich, Marc; Tavakol, Parnian; Black, David; Wenig, Dirk; Rieder, Christian; Malaka, Rainer; Kikinis, Ron

2017-09-01

Surgical navigation systems rely on a monitor placed in the operating room to relay information. Optimal monitor placement can be challenging in crowded rooms, and it is often not possible to place the monitor directly beside the situs. The operator must split attention between the navigation system and the situs. We present an approach for needle-based interventions to provide navigational feedback directly on the instrument and close to the situs by mounting a small display onto the needle. By mounting a small and lightweight smartwatch display directly onto the instrument, we are able to provide navigational guidance close to the situs and directly in the operator's field of view, thereby reducing the need to switch the focus of view between the situs and the navigation system. We devise a specific variant of the established crosshair metaphor suitable for the very limited screen space. We conduct an empirical user study comparing our approach to using a monitor and a combination of both. Results from the empirical user study show significant benefits for cognitive load, user preference, and general usability for the instrument-mounted display, while achieving the same level of performance in terms of time and accuracy compared to using a monitor. We successfully demonstrate the feasibility of our approach and potential benefits. With ongoing technological advancements, instrument-mounted displays might complement standard monitor setups for surgical navigation in order to lower cognitive demands and for improved usability of such systems.

A Surgical Business Composite Score for Army Medicine.

Science.gov (United States)

Stoddard, Douglas R; Robinson, Andrew B; Comer, Tracy A; Meno, Jenifer A; Welder, Matthew D

2016-06-01

Measuring surgical business performance for Army military treatment facilities is currently done through 6 business metrics developed by the Army Medical Command (MEDCOM) Surgical Services Service Line (3SL). Development of a composite score for business performance has the potential to simplify and synthesize measurement, improving focus for strategic goal setting and implementation. However, several considerations, ranging from data availability to submetric selection, must be addressed to ensure the score is accurate and representative. This article presents the methodology used in the composite score's creation and presents a metric based on return on investment and a measure of cases recaptured from private networks. Reprint & Copyright © 2016 Association of Military Surgeons of the U.S.

Influence of usage history, instrument complexity, and different cleaning procedures on the cleanliness of blood-contaminated dental surgical instruments

NARCIS (Netherlands)

Wu, G.; Yu, X.F.

2009-01-01

Our study assessed the factors that influence the resistance of blood residues on dental surgical instruments to washer‐disinfector-based cleaning procedures in a clinical setting. The use of 2 additional cleaning methods—presoaking and scrubbing by hand—and the use of newer and/or less structurally

Protein adsorption on low temperature alpha alumina films for surgical instruments

Energy Technology Data Exchange (ETDEWEB)

Cloud, A.N., E-mail: acloud@uark.ed [University of Arkansas, Fayetteville, AR 72701 (United States); Kumar, S. [Ian Wark Research Institute, University of South Australia, Mawson Lakes, Adelaide, SA 5095 (Australia); Kavdia, M.; Abu-Safe, H.H.; Gordon, M.H. [University of Arkansas, Fayetteville, AR 72701 (United States)

2009-08-31

Bulk alumina has been shown to exhibit reduced protein adsorption, a property that can be exploited for developing alumina-coated surgical instruments and devices. Alpha alumina thin films were deposited on surgical stainless steel substrates to investigate the adsorption of a model protein (BSA, bovine serum albumin). The films were deposited at 480 {sup o}C by AC inverted cylindrical magnetron sputtering. Films were obtained at 6 kW and 50% oxygen partial pressure by volume. The presence of alpha-phase alumina has been shown by transmission electron microscopy. Results indicate that there was a 50% reduction in protein adsorption for samples with the alumina coating compared to those with no coating.

Highly sensitive rapid fluorescence detection of protein residues on surgical instruments

International Nuclear Information System (INIS)

Kovalev, Valeri I; Bartona, James S; Richardson, Patricia R; Jones, Anita C

2006-01-01

There is a risk of contamination of surgical instruments by infectious protein residues, in particular, prions which are the agents for Creutzfeldt-Jakob Disease in humans. They are exceptionally resistant to conventional sterilization, therefore it is important to detect their presence as contaminants so that alternative cleaning procedures can be applied. We describe the development of an optimized detection system for fluorescently labelled protein, suitable for in-hospital use. We show that under optimum conditions the technique can detect ∼10 attomole/cm 2 with a scan speed of ∼3-10 cm 2 /s of the test instrument's surface. A theoretical analysis and experimental measurements will be discussed

Surgical infection in a videolaparoscopic cholecystectomy when using peracetic acid for the sterilization of instruments.

Science.gov (United States)

de Melo, Edluza Maria Viana Bezerra; Leão, Cristiano de Souza; Andreto, Luciana Marques; de Mello, Maria Júlia Gonçalves

2013-01-01

To determine the frequency of surgical site infection in patients undergoing laparoscopic cholecystectomy with instruments sterilized by peracetic acid. We conducted a retrospective, cohort, descriptive, cross-sectional study. Peracetic acid has been used for sterilization following the protocol recommended by the manufacturer. We observed the criteria and indicators of process and structure for preventing surgical site infection pre and intraoperatively. For epidemiological surveillance, outpatient visits were scheduled for the 15th and between the 30th and 45th days after discharge. Among the 247 patients, there were two cases of surgical site infection (0.8%). One patient was readmitted to systemic antibiotic therapy and percutaneous puncture; in the other the infection was superficial and followed at the clinic. Ethical issues prevent the conduction of a prospective study because of peracetic acid have been banned for the sterilization of instruments that penetrate organs and cavities. Nevertheless, these results encourage prospective case-control studies comparing its use (historical control) with ethylene oxide sterilization.

Highly sensitive rapid fluorescence detection of protein residues on surgical instruments

Energy Technology Data Exchange (ETDEWEB)

Kovalev, Valeri I [School of Engineering and Physical Sciences, Heriot-Watt University, Edinburgh EH14 4AS (United Kingdom); Bartona, James S [School of Engineering and Physical Sciences, Heriot-Watt University, Edinburgh EH14 4AS (United Kingdom); Richardson, Patricia R [School of Chemistry, University of Edinburgh, Edinburgh, EH9 3JJ (United Kingdom); Jones, Anita C [School of Chemistry, University of Edinburgh, Edinburgh, EH9 3JJ (United Kingdom)

2006-07-15

There is a risk of contamination of surgical instruments by infectious protein residues, in particular, prions which are the agents for Creutzfeldt-Jakob Disease in humans. They are exceptionally resistant to conventional sterilization, therefore it is important to detect their presence as contaminants so that alternative cleaning procedures can be applied. We describe the development of an optimized detection system for fluorescently labelled protein, suitable for in-hospital use. We show that under optimum conditions the technique can detect {approx}10 attomole/cm{sup 2} with a scan speed of {approx}3-10 cm{sup 2}/s of the test instrument's surface. A theoretical analysis and experimental measurements will be discussed.

[Surgical Roman instruments in the Museum of History of Medicine of the University of Rome "La Sapienza"].

Science.gov (United States)

Gazzaniga, V; Serarcangeli, C

1999-01-01

The Museum of History of Medicine at the University of Rome "La Sapienza" keeps numerous roman surgical instruments, dating from the 1st century A.D. This article offers a short review of the critical literature existing on the topic, together with a temporary catalogue of the instruments.

Surgical robotics beyond enhanced dexterity instrumentation: a survey of machine learning techniques and their role in intelligent and autonomous surgical actions.

Science.gov (United States)

Kassahun, Yohannes; Yu, Bingbin; Tibebu, Abraham Temesgen; Stoyanov, Danail; Giannarou, Stamatia; Metzen, Jan Hendrik; Vander Poorten, Emmanuel

2016-04-01

Advances in technology and computing play an increasingly important role in the evolution of modern surgical techniques and paradigms. This article reviews the current role of machine learning (ML) techniques in the context of surgery with a focus on surgical robotics (SR). Also, we provide a perspective on the future possibilities for enhancing the effectiveness of procedures by integrating ML in the operating room. The review is focused on ML techniques directly applied to surgery, surgical robotics, surgical training and assessment. The widespread use of ML methods in diagnosis and medical image computing is beyond the scope of the review. Searches were performed on PubMed and IEEE Explore using combinations of keywords: ML, surgery, robotics, surgical and medical robotics, skill learning, skill analysis and learning to perceive. Studies making use of ML methods in the context of surgery are increasingly being reported. In particular, there is an increasing interest in using ML for developing tools to understand and model surgical skill and competence or to extract surgical workflow. Many researchers begin to integrate this understanding into the control of recent surgical robots and devices. ML is an expanding field. It is popular as it allows efficient processing of vast amounts of data for interpreting and real-time decision making. Already widely used in imaging and diagnosis, it is believed that ML will also play an important role in surgery and interventional treatments. In particular, ML could become a game changer into the conception of cognitive surgical robots. Such robots endowed with cognitive skills would assist the surgical team also on a cognitive level, such as possibly lowering the mental load of the team. For example, ML could help extracting surgical skill, learned through demonstration by human experts, and could transfer this to robotic skills. Such intelligent surgical assistance would significantly surpass the state of the art in surgical

Analysis of risk factors for loss of lumbar lordosis in patients who had surgical treatment with segmental instrumentation for adolescent idiopathic scoliosis.

Science.gov (United States)

Trobisch, Per D; Samdani, Amer F; Betz, Randal R; Bastrom, Tracey; Pahys, Joshua M; Cahill, Patrick J

2013-06-01

Iatrogenic flattening of lumbar lordosis in patients with adolescent idiopathic scoliosis (AIS) was a major downside of first generation instrumentation. Current instrumentation systems allow a three-dimensional scoliosis correction, but flattening of lumbar lordosis remains a significant problem which is associated with decreased health-related quality of life. This study sought to identify risk factors for loss of lumbar lordosis in patients who had surgical correction of AIS with the use of segmental instrumentation. Patients were included if they had surgical correction for AIS with segmental pedicle screw instrumentation Lenke type 1 or 2 and if they had a minimum follow-up of 24 months. Two groups were created, based on the average loss of lumbar lordosis. The two groups were then compared and multivariate analysis was performed to identify parameters that correlated to loss of lumbar lordosis. Four hundred and seventeen patients were analyzed for this study. The average loss of lumbar lordosis at 24 months follow-up was an increase of 10° lordosis for group 1 and a decrease of 15° for group 2. Risk factors for loss of lumbar lordosis included a high preoperative lumbar lordosis, surgical decrease of thoracic kyphosis, and the particular operating surgeon. The lowest instrumented vertebra or spinopelvic parameters were two of many parameters that did not seem to influence loss of lumbar lordosis. This study identified important risk factors for decrease of lumbar lordosis in patients who had surgical treatment for AIS with segmental pedicle screw instrumentation, including a high preoperative lumbar lordosis, surgical decrease of thoracic kyphosis, and factors attributable to a particular operating surgeon that were not quantified in this study.

Surgical instrument biocontaminant fluorescence detection in ambient lighting conditions for hospital reprocessing and sterilization department (Conference Presentation)

Science.gov (United States)

Baribeau, François; Bubel, Annie; Dumont, Guillaume; Vachon, Carl; Lépine, André; Rochefort, Stéphane; Massicotte, Martin; Buteau-Vaillancourt, Louis; Gallant, Pascal; Mermut, Ozzy

2017-03-01

Hospitals currently rely on simple human visual inspection for assessing cleanliness of surgical instruments. Studies showed that surgical site infections are in part attributed to inadequate cleaning of medical devices. Standards groups recognize the need to objectively quantify the amount of residues on surgical instruments and establish guidelines. We developed a portable technology for the detection of contaminants on surgical instruments through fluorescence following cleaning. Weak fluorescence signals are usually detected in the obscurity only with the lighting of the excitation source. The key element of this system is that it works in ambient lighting conditions, a requirement to not disturb the normal workflow of hospital reprocessing facilities. A biocompatible fluorescent dye is added to the detergent and labels the proteins of organic residues. It is resistant to the harsh environment in a washer-disinfector. Two inspection devices have been developed with a 488nm laser as the excitation source: a handheld scanner and a tabletop station using spectral-domain and time-domain ambient light cancellation schemes. The systems are eye safe and equipped with image processing and interfacing software to provide visual or audible warnings to the operator based on a set of adjustable signal thresholds. Micron-scale residues are detected by the system which can also evaluate soil size and mass. Unlike swabbing, it can inspect whole tools in real-time. The technology has been validated in an independent hospital decontamination research laboratory. It also has potential applications in the forensics, agro-food, and space fields. Technical aspects and results will be presented and discussed.

Management of Surgical Instruments Package in the Operating Room%手术室器械包的管理

Institute of Scientific and Technical Information of China (English)

刘萍; 张娟; 潘文琴; 戴榕娟

2017-01-01

Objective Cleaning, maintenance, disinfection and preoperative preparation of surgical instruments in the past are done by the operation room, but with the development of China's hospitals and national new surgical management practices, certain progress has been achieved in the integrated management of surgical instruments for the operating rooms.Practical experiences in the management were discussed in this article.MethodsIn order to improve work quality and work efficiency and to reduce cost in the management of instruments in operation room, we analyzed the current situation of the management of equipment in the operation room based on the reality and tried to find out the method of surgical instrument package innovation, including the production of classification photo album for the surgical instrument package, paper list of all equipments, and production of marking cards for the instruments that can stand the sterilization under high pressure.Results and Conclusion From the implementation point of view, the total loss rate is reduced from the original 0.43% to 0.14%,and the loss rate of the micro device from 0.725% to 0.23%, effectively reducing the device losses.Great progress has been made in the use of the new methods, the quality of the personnel, in charge of the surgical instruments, classification management and the mapping and marking of cards.%目的 手术器械包的清洗、保养、消毒灭菌和术前准备工作以往均由手术室自行完成,随着我国医院洁净手术室的发展和国家新手术管理规范的实施,手术器械管理实施手供一体化相关工作逐步取得一定的效果.方法 分析手术器械包的管理及成效,改善工作品质,提高工作效率,降低成本等情况;找出手术器械包新的管理方法,包括制作手术器械包分类相册,以及手术器械包中加入纸质的器械清单、制作能够高压灭菌的金属器械牌等手段.结果与结论 �

Tracking-by-detection of surgical instruments in minimally invasive surgery via the convolutional neural network deep learning-based method.

Science.gov (United States)

Zhao, Zijian; Voros, Sandrine; Weng, Ying; Chang, Faliang; Li, Ruijian

2017-12-01

Worldwide propagation of minimally invasive surgeries (MIS) is hindered by their drawback of indirect observation and manipulation, while monitoring of surgical instruments moving in the operated body required by surgeons is a challenging problem. Tracking of surgical instruments by vision-based methods is quite lucrative, due to its flexible implementation via software-based control with no need to modify instruments or surgical workflow. A MIS instrument is conventionally split into a shaft and end-effector portions, while a 2D/3D tracking-by-detection framework is proposed, which performs the shaft tracking followed by the end-effector one. The former portion is described by line features via the RANSAC scheme, while the latter is depicted by special image features based on deep learning through a well-trained convolutional neural network. The method verification in 2D and 3D formulation is performed through the experiments on ex-vivo video sequences, while qualitative validation on in-vivo video sequences is obtained. The proposed method provides robust and accurate tracking, which is confirmed by the experimental results: its 3D performance in ex-vivo video sequences exceeds those of the available state-of -the-art methods. Moreover, the experiments on in-vivo sequences demonstrate that the proposed method can tackle the difficult condition of tracking with unknown camera parameters. Further refinements of the method will refer to the occlusion and multi-instrumental MIS applications.

An integrated approach to endoscopic instrument tracking for augmented reality applications in surgical simulation training.

Science.gov (United States)

Loukas, Constantinos; Lahanas, Vasileios; Georgiou, Evangelos

2013-12-01

Despite the popular use of virtual and physical reality simulators in laparoscopic training, the educational potential of augmented reality (AR) has not received much attention. A major challenge is the robust tracking and three-dimensional (3D) pose estimation of the endoscopic instrument, which are essential for achieving interaction with the virtual world and for realistic rendering when the virtual scene is occluded by the instrument. In this paper we propose a method that addresses these issues, based solely on visual information obtained from the endoscopic camera. Two different tracking algorithms are combined for estimating the 3D pose of the surgical instrument with respect to the camera. The first tracker creates an adaptive model of a colour strip attached to the distal part of the tool (close to the tip). The second algorithm tracks the endoscopic shaft, using a combined Hough-Kalman approach. The 3D pose is estimated with perspective geometry, using appropriate measurements extracted by the two trackers. The method has been validated on several complex image sequences for its tracking efficiency, pose estimation accuracy and applicability in AR-based training. Using a standard endoscopic camera, the absolute average error of the tip position was 2.5 mm for working distances commonly found in laparoscopic training. The average error of the instrument's angle with respect to the camera plane was approximately 2°. The results are also supplemented by video segments of laparoscopic training tasks performed in a physical and an AR environment. The experiments yielded promising results regarding the potential of applying AR technologies for laparoscopic skills training, based on a computer vision framework. The issue of occlusion handling was adequately addressed. The estimated trajectory of the instruments may also be used for surgical gesture interpretation and assessment. Copyright © 2013 John Wiley & Sons, Ltd.

Output control of da Vinci surgical system's surgical graspers.

Science.gov (United States)

Johnson, Paul J; Schmidt, David E; Duvvuri, Umamaheswar

2014-01-01

The number of robot-assisted surgeries performed with the da Vinci surgical system has increased significantly over the past decade. The articulating movements of the robotic surgical grasper are controlled by grip controls at the master console. The user interface has been implicated as one contributing factor in surgical grasping errors. The goal of our study was to characterize and evaluate the user interface of the da Vinci surgical system in controlling surgical graspers. An angular manipulator with force sensors was used to increment the grip control angle as grasper output angles were measured. Input force at the grip control was simultaneously measured throughout the range of motion. Pressure film was used to assess the maximum grasping force achievable with the endoscopic grasping tool. The da Vinci robot's grip control angular input has a nonproportional relationship with the grasper instrument output. The grip control mechanism presents an intrinsic resistant force to the surgeon's fingertips and provides no haptic feedback. The da Vinci Maryland graspers are capable of applying up to 5.1 MPa of local pressure. The angular and force input at the grip control of the da Vinci robot's surgical graspers is nonproportional to the grasper instrument's output. Understanding the true relationship of the grip control input to grasper instrument output may help surgeons understand how to better control the surgical graspers and promote fewer grasping errors. Copyright © 2014 Elsevier Inc. All rights reserved.

A case study on the design of a modular surgical instrument for removing metastases using engineering design tools

OpenAIRE

Preca, George; Farrugia, Philip; Casha, Aaron; International Conference on Engineering and Product Design Education

2014-01-01

Metastatic cancer is a form of cancer stemming from a primary tumour that propagates to different organs and/or to different sites within the same organ. Studies have indicated that the chances of survival improve upon surgical removal of metastases. The overall goal of this research was to develop a modular surgical instrument that would be easy to use and manipulate and hence facilitate resection of metastases. This research forms part of a final year project carried out by a mechanical eng...

Systems for tracking minimally invasive surgical instruments

NARCIS (Netherlands)

Chmarra, M. K.; Grimbergen, C. A.; Dankelman, J.

2007-01-01

Minimally invasive surgery (e.g. laparoscopy) requires special surgical skills, which should be objectively assessed. Several studies have shown that motion analysis is a valuable assessment tool of basic surgical skills in laparoscopy. However, to use motion analysis as the assessment tool, it is

Surgical risks and perioperative complications of instrumented lumbar surgery in patients with liver cirrhosis

Directory of Open Access Journals (Sweden)

Tung-Yi Lin

2014-02-01

Full Text Available Background: Patients with liver cirrhosis have high surgical risks due to malnutrition, impaired immunity, coagulopathy, and encephalopathy. However, there is no information in English literature about the results of liver cirrhotic patients who underwent instrumented lumbar surgery. The purpose of this study is to report the perioperative complications, clinical outcomes and determine the surgical risk factors in cirrhotic patients. Methods: We retrospectively reviewed 29 patients with liver cirrhosis who underwent instrumented lumbar surgery between 1997 and 2009. The hepatic functional reserves of the patients were recorded according to the Child-Turcotte-Pugh scoring system. Besides, fourteen other variables and perioperative complications were also collected. To determine the risks, we divided the patients into two groups according to whether or not perioperative complications developed. Results: Of the 29 patients, 22 (76% belonged to Child class A and 7 (24% belonged to Child class B. Twelve patients developed one or more complications. Patients with Child class B carried a significantly higher incidence of complications than those with Child class A (p = 0.011. In the Child class A group, patients with 6 points had a significantly higher incidence of complications than those with 5 points (p = 0.025. A low level of albumin was significantly associated with higher risk, and a similar trend was also noted for the presence of ascites although statistical difference was not reached. Conclusion: The study concludes that patients with liver cirrhosis who have undergone instrumented lumbar surgery carry a high risk of developing perioperative complications, especially in those with a Child-Turcotte-Pugh score of 6 or more.

Achieving a predictable 24-hour return to normal activities after breast augmentation: part II. Patient preparation, refined surgical techniques, and instrumentation.

Science.gov (United States)

Tebbetts, John B

2006-12-01

The goal of this study was to develop practices that would allow patients undergoing subpectoral augmentation to predictably return to full normal activities within 24 hours after the operation, free of postoperative adjuncts. Part I of this study used motion and time study principles to reduce operative times, medication dosages, perioperative morbidity, and recovery times in augmentation mammaplasty. Part II of the study focuses on details of patient education, preoperative planning, instrumentation, and surgical technique modifications that were identified, modified, and implemented to achieve the results reported in part I. Two groups of 16 patients each (groups 1 and 2) were studied retrospectively for comparison to a third group of 627 patients (group 3) studied prospectively. Patients in group 1 had axillary partial retropectoral breast augmentations in 1982-1983, using dissociative anesthesia, blunt instrument implant pocket dissection, and Dow Corning, double-lumen implants containing 20 mg of methylprednisolone and 20 cc of saline in the outer lumen of the implants. Patients in group 2 (1990) had inframammary, retromammary augmentations by using a combination of blunt and electrocautery dissection, Surgitek Replicon polyurethane-covered, silicone gel-filled implants, and general endotracheal anesthesia. Patients in group 3 (1998 to 2001, n = 627) had inframammary partial retropectoral, inframammary retromammary, and axillary partial retropectoral augmentations under general endotracheal anesthesia. Refined practices and surgical techniques from studies of groups 1 and 2 were applied in group 3. Videotapes from operative procedures of groups 1 and 2 were analyzed with macromotion and micromotion study principles, and tables of events were formulated for each move during the operation for all personnel in the operating room. Extensive details of surgical technique were examined and reexamined in 13 different stages by using principles of motion and time

Evaluation of two disinfection/sterilization methods on silicon rubber-based composite finishing instruments.

Science.gov (United States)

Lacerda, Vánia A; Pereira, Leandro O; Hirata JUNIOR, Raphael; Perez, Cesar R

2015-12-01

To evaluate the effectiveness of disinfection/sterilization methods and their effects on polishing capacity, micomorphology, and composition of two different composite fiishing and polishing instruments. Two brands of finishing and polishing instruments (Jiffy and Optimize), were analyzed. For the antimicrobial test, 60 points (30 of each brand) were used for polishing composite restorations and submitted to three different groups of disinfection/sterilization methods: none (control), autoclaving, and immersion in peracetic acid for 60 minutes. The in vitro tests were performed to evaluate the polishing performance on resin composite disks (Amelogen) using a 3D scanner (Talyscan) and to evaluate the effects on the points' surface composition (XRF) and micromorphology (MEV) after completing a polishing and sterilizing routine five times. Both sterilization/disinfection methods were efficient against oral cultivable organisms and no deleterious modification was observed to point surface.

Femoral Test Bed for Impedance Controlled Surgical Instrumentation

Directory of Open Access Journals (Sweden)

Christian Brendle

2012-01-01

Full Text Available The risk for patients during the standard procedure of revision of cemented artificial hip joints is unsatisfactorily highdue to its high level of invasiveness and limited access to the operative field. To reduce this risk we are developing anImpedance Controlled Surgical Instrumentation (ICOS system, which aims to establish real-time control during a BoneCement (BC milling process. For this, the relationship between the thickness of the BC and its frequency-dependentelectrical impedance is used to estimate the residual BC thickness. The aim is to avoid unintended cutting of boneby detecting the passage of the BC/bone boundary layer by the milling head. In a second step, an estimation of theresidual BC thickness will be used to improve process control. As a first step towards demonstrating the feasibility ofour approach, presented here are experimental studies to characterize the BC permittivity and to describe the process indetail. The results show that the permittivity properties of BC are dominated by its polymethyl methacrylate (PMMAfraction. Thus, PMMA can be used as a substitute for future experiments. Furthermore, a Femoral Test Bed (FTB wasdesigned. Using this setup we show it is feasible to accurately distinguish between slightly different thicknesses of BC.

Surgical Outcome of Reduction and Instrumented Fusion in Lumbar Degenerative Spondylolisthesis

Directory of Open Access Journals (Sweden)

Farzad Omidi-Kashani

2016-02-01

Full Text Available Background: Lumbar degenerative spondylolisthesis (LDS is a degenerative slippage of the lumbar vertebrae. We aimed to evaluate the surgical outcome of degenerative spondylolisthesis with neural decompression, pedicular screw fixation, reduction, and posterolateral fusion. Methods: This before-after study was carried out on 45 patients (37 female and 8 male with LDS operated from August 2008 to January 2011. The patients’ pain and disability were assessed by visual analogue scale (VAS and Oswestry disability index (ODI questionnaire. In surgery, we applied distraction force to facilitate slip reduction. All the intra- and postoperative complications were recorded. The paired t-test and Pearson correlation coefficient were used for statistical analysis. Results: The mean age of patients and mean follow-up period were 58.3±3.5 years and 31.2±4.8 months, respectively. The mean slip correction rate was 52.2% with a mean correction loss of 4.8%. Preoperative VAS and ODI improved from 8.8 and 71.6 to postoperative 2.1 and 28.7, respectively. Clinical improvement was more prominent in more reduced patients, but Pearson coefficient could not find a significant correlation. Conclusion: Although spinal decompression with fusion and posterior instrumentation in surgical treatment of the patients with LDS result in satisfactory outcome, vertebral reduction cannot significantly enhance the clinical improvement.

Surgical smoke.

Science.gov (United States)

Fan, Joe King-Man; Chan, Fion Siu-Yin; Chu, Kent-Man

2009-10-01

Surgical smoke is the gaseous by-product formed during surgical procedures. Most surgeons, operating theatre staff and administrators are unaware of its potential health risks. Surgical smoke is produced by various surgical instruments including those used in electrocautery, lasers, ultrasonic scalpels, high speed drills, burrs and saws. The potential risks include carbon monoxide toxicity to the patient undergoing a laparoscopic operation, pulmonary fibrosis induced by non-viable particles, and transmission of infectious diseases like human papilloma virus. Cytotoxicity and mutagenicity are other concerns. Minimisation of the production of surgical smoke and modification of any evacuation systems are possible solutions. In general, a surgical mask can provide more than 90% protection to exposure to surgical smoke; however, in most circumstances it cannot provide air-tight protection to the user. An at least N95 grade or equivalent respirator offers the best protection against surgical smoke, but whether such protection is necessary is currently unknown.

Surgical navigation with QR codes

Directory of Open Access Journals (Sweden)

Katanacho Manuel

2016-09-01

Full Text Available The presented work is an alternative to established measurement systems in surgical navigation. The system is based on camera based tracking of QR code markers. The application uses a single video camera, integrated in a surgical lamp, that captures the QR markers attached to surgical instruments and to the patient.

Is hospital information system relevant to detect surgical site infection? Findings from a prospective surveillance study in posterior instrumented spinal surgery.

Science.gov (United States)

Boetto, J; Chan-Seng, E; Lonjon, G; Pech, J; Lotthé, A; Lonjon, N

2015-11-01

Spinal instrumentation has a high rate of surgical site infection (SSI), but results greatly vary depending on surveillance methodology, surgical procedures, or quality of follow-up. Our aim was to study true incidence of SSI in spinal surgery by significant data collection, and to compare it with the results obtained through the hospital information system. This work is a single center prospective cohort study that included all patients consecutively operated on for spinal instrumentation by posterior approach over a six-month period regardless the etiology. For all patients, a "high definition" prospective method of surveillance was performed by the infection control (IC) department during at least 12 months after surgery. Results were then compared with findings from automatic surveillance though the hospital information system (HIS). One hundred and fifty-four patients were included. We found no hardly difference between "high definition" and automatic surveillance through the HIS, even if HIS tended to under-estimate the infection rate: rate of surgical site infection was 2.60% and gross SSI incidence rate via the hospital information system was 1.95%. Smoking and alcohol consumption were significantly related to a SSI. Our SSI rates to reflect the true incidence of infectious complications in posterior instrumented adult spinal surgery in our hospital and these results were consistent with the lower levels of published infection rate. In-house surveillance by surgeons only is insufficiently sensitive. Further studies with more patients and a longer inclusion time are needed to conclude if SSI case detection through the HIS could be a relevant and effective alternative method. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Validation of a virtual reality-based robotic surgical skills curriculum.

Science.gov (United States)

Connolly, Michael; Seligman, Johnathan; Kastenmeier, Andrew; Goldblatt, Matthew; Gould, Jon C

2014-05-01

The clinical application of robotic-assisted surgery (RAS) is rapidly increasing. The da Vinci Surgical System™ is currently the only commercially available RAS system. The skills necessary to perform robotic surgery are unique from those required for open and laparoscopic surgery. A validated laparoscopic surgical skills curriculum (fundamentals of laparoscopic surgery or FLS™) has transformed the way surgeons acquire laparoscopic skills. There is a need for a similar skills training and assessment tool specific for robotic surgery. Based on previously published data and expert opinion, we developed a robotic skills curriculum. We sought to evaluate this curriculum for evidence of construct validity (ability to discriminate between users of different skill levels). Four experienced surgeons (>20 RAS) and 20 novice surgeons (first-year medical students with no surgical or RAS experience) were evaluated. The curriculum comprised five tasks utilizing the da Vinci™ Skills Simulator (Pick and Place, Camera Targeting 2, Peg Board 2, Matchboard 2, and Suture Sponge 3). After an orientation to the robot and a period of acclimation in the simulator, all subjects completed three consecutive repetitions of each task. Computer-derived performance metrics included time, economy of motion, master work space, instrument collisions, excessive force, distance of instruments out of view, drops, missed targets, and overall scores (a composite of all metrics). Experienced surgeons significantly outperformed novice surgeons in most metrics. Statistically significant differences were detected for each task in regards to mean overall scores and mean time (seconds) to completion. The curriculum we propose is a valid method of assessing and distinguishing robotic surgical skill levels on the da Vinci Si™ Surgical System. Further study is needed to establish proficiency levels and to demonstrate that training on the simulator with the proposed curriculum leads to improved robotic

Posterior Rigid Instrumentation of C7: Surgical Considerations and Biomechanics at the Cervicothoracic Junction. A Review of the Literature.

Science.gov (United States)

Bayoumi, Ahmed B; Efe, Ibrahim E; Berk, Selim; Kasper, Ekkehard M; Toktas, Zafer Orkun; Konya, Deniz

2018-03-01

The cervicothoracic junction is a challenging anatomic transition in spine surgery. It is commonly affected by different types of diseases that may significantly impair stability in this region. The seventh cervical vertebra (C7) is an atypical cervical vertebra with unique anatomic features compared to subaxial cervical spine (C3 to C6). C7 has relatively broader laminae, larger pedicles, smaller lateral masses, and a long nonbifid spinous process. These features allow a variety of surgical methods for performing posterior rigid instrumentation in the form of different types of screws, such as lateral mass screws, pedicle screws, transfacet screws, and intralaminar screws. Many biomechanical studies on cadavers have evaluated and compared different types of implants at C7. We reviewed PubMed/Medline by using specific combinations of keywords to summarize previously published articles that examined C7 posterior rigid instrumentation thoroughly in an experimental fashion on patients or cadavers with additional descriptive radiologic parameters for evaluation of the optimum surgical technique for each type. A total of 44 articles were reported, including 22 articles that discussed anatomic considerations (entry points, sagittal and axial trajectories, and features of screws) and another 22 articles that discussed the relevant biomechanical testing at this transitional region if C7 was directly involved in terms of receiving posterior rigid implants. C7 can accommodate different types of screws, which can provide additional benefits and risks based on availability of bony purchase, awareness of surgical technique, biomechanics, and anatomic considerations. Copyright © 2017 Elsevier Inc. All rights reserved.

Maximizing coupling strength of magnetically anchored surgical instruments: how thick can we go?

Science.gov (United States)

Best, Sara L; Bergs, Richard; Gedeon, Makram; Paramo, Juan; Fernandez, Raul; Cadeddu, Jeffrey A; Scott, Daniel J

2011-01-01

The Magnetic Anchoring and Guidance System (MAGS) includes an external magnet that controls intra-abdominal surgical instruments via magnetic attraction forces. We have performed NOTES (Natural Orifice Transluminal Endoscopic Surgery) and LESS (Laparoendoscopic Single Site) procedures using MAGS instruments in porcine models with up to 2.5-cm-thick abdominal walls, but this distance may not be sufficient in some humans. The purpose of this study was to determine the maximal abdominal wall thickness for which the current MAGS platform is suitable. Successive iterations of prototype instruments were developed; those evaluated in this study include external (134-583 g, 38-61 mm diameter) and internal (8-39 g, 10-22 mm diameter) components using various grades, diameters, thicknesses, and stacking/shielding/focusing configurations of permanent Neodymium-iron-boron (NdFeB) magnets. Nine configurations were tested for coupling strength across distances of 0.1-10 cm. The force-distance tests across an air medium were conducted at 0.5-mm increments using a robotic arm fitted with a force sensor. A minimum theoretical instrument drop-off (decoupling) threshold was defined as the separation distance at which force decreased below the weight of the heaviest internal component (39 g). Magnetic attraction forces decreased exponentially over distance. For the nine configurations tested, the average forces were 3,334 ± 1,239 gf at 0.1 cm, 158 ± 98 gf at 2.5 cm, and 8.7 ± 12 gf at 5 cm; the drop-off threshold was 3.64 ± 0.8 cm. The larger stacking configurations and magnets yielded up to a 592% increase in attraction force at 2.5 cm and extended the drop-off threshold distance by up to 107% over single-stack anchors. For the strongest configuration, coupling force ranged from 5,337 gf at 0.1 cm to 0 gf at 6.95 cm and yielded a drop-off threshold distance of 4.78 cm. This study suggests that the strongest configuration of currently available MAGS instruments is suitable for

A study on factors of dissatisfaction and stress of the blacksmiths resulting from the organizational culture in the surgical instrument industry of India.

Science.gov (United States)

Ghosh, Tirthankar; Das, Banibrata; Gangopadhyay, Somnath

2011-07-01

It is important to understand what motivates workers and the extent to which the organization and other contextual variables satisfy them. The aim of the study was to determine factors of dissatisfaction resulting from the organizational culture among the blacksmiths involved in the surgical instrument industry. Fifty male surgical blacksmiths each of the skilled and unskilled groups of the forging section were selected. Organizational Role Stress Scale was used to measure the individuals' role stress and several forms of conflict within an organization. Also, the organizational culture and personal involvement in an organization was measured among the surgical blacksmiths. The mean score for total role stress for Skilled was 71.7 and for unskilled was 77.2. The most frequent type of organizational culture was reported to be hierarchy, both by skilled and unskilled surgical blacksmiths, followed by market and clan culture. This study shows that the skilled surgical blacksmiths have lower level of stress and conflicts in comparison with unskilled surgical blacksmiths. Both skilled and unskilled surgical blacksmiths estimated their level of personal involvement as low and indicated insufficient involvement in work teams. The satisfaction of the employees with their status and role in the organizational culture was also poor for both skilled and unskilled surgical blacksmiths.

Chemical compositions of magnetic, stony spherules from deep-sea sediments determined by instrumental neutron activation analysis

International Nuclear Information System (INIS)

Yamakoshi, Kazuo

1984-01-01

Chemical compositions of magnetic, stony spherules from deep sea sediments were determined by instrumental neutron activation analysis. High Ir, Au, Ni and Co contents indicate their extraterrestrial origin. The obtained compositions are considerably different from those of chondrites. It can be qualitatively interpreted, however, that cosmic matters having the compositions of chondrites are changed into magnetic, stony spherules by thermal degenerations during their atmospheric entry. (author)

A study on factors of dissatisfaction and stress of the blacksmiths resulting from the organizational culture in the surgical instrument industry of India

Directory of Open Access Journals (Sweden)

Tirthankar Ghosh

2011-01-01

Full Text Available Background: It is important to understand what motivates workers and the extent to which the organization and other contextual variables satisfy them. The aim of the study was to determine factors of dissatisfaction resulting from the organizational culture among the blacksmiths involved in the surgical instrument industry. Materials and Methods: Fifty male surgical blacksmiths each of the skilled and unskilled groups of the forging section were selected. Organizational Role Stress Scale was used to measure the individuals′ role stress and several forms of conflict within an organization. Also, the organizational culture and personal involvement in an organization was measured among the surgical blacksmiths. Results: The mean score for total role stress for Skilled was 71.7 and for unskilled was 77.2. The most frequent type of organizational culture was reported to be hierarchy, both by skilled and unskilled surgical blacksmiths, followed by market and clan culture. Conclusion: This study shows that the skilled surgical blacksmiths have lower level of stress and conflicts in comparison with unskilled surgical blacksmiths. Both skilled and unskilled surgical blacksmiths estimated their level of personal involvement as low and indicated insufficient involvement in work teams. The satisfaction of the employees with their status and role in the organizational culture was also poor for both skilled and unskilled surgical blacksmiths.

Freeman's transorbital lobotomy as an anomaly: A material culture examination of surgical instruments and operative spaces.

Science.gov (United States)

Collins, Brianne M; Stam, Henderikus J

2015-05-01

In 1946, Walter Freeman introduced the transorbital ice pick lobotomy. Touted as a procedure that could be learned and subsequently performed by psychiatrists outside of the operating room, the technique was quickly criticized by neurosurgeons. In this article, we take a material culture approach to consider 2 grounds upon which neurosurgeons based their objections-surgical instruments and operative spaces. On both counts, Freeman was in contravention of established normative neurosurgical practices and, ultimately, his technique was exposed as an anomaly by neurosurgeons. Despite its rejection, the transorbital lobotomy became entrenched in contemporary memory and remains the emblematic procedure of the psychosurgery era. (c) 2015 APA, all rights reserved).

手术污染器械保湿过程中的污染控制%Contamination control during wetting of contaminated surgical instruments

Institute of Scientific and Technical Information of China (English)

龚珊; 许多朵; 董薪

2015-01-01

目的：分析手术污染器械保湿以提高器械的清洗效果，确保手术安全。方法选择2014年3－6月污染的医疗器械1200件，分为保湿组与未保湿组，每组各600件，通过对手术污染器械处理过程中技术规范的实践，分析器械保湿对于提高器械清洗效果的重要性。结果在器械回收、转运、预清洗、正式清洗等环节中，不同时间保湿组细菌菌落数低于未保湿组，使用专用保湿剂抑制了细菌生长；保湿组目测及5倍放大镜下监测器械清洁合格率分别为100．0％、99．5％，均高于未保湿组的98．7％、97．8％；保湿组污染器械清洗后隐血试验合格率100．0％，高于未保湿组的98．7％。结论适当的保湿处理能提高器械清洗合格率，确保清洗质量，对于手术污染器械的感染控制有重要作用，为杜绝由于器械清洗不彻底引起医源性感染提供保证。%OBJECTIVE To analyze the wetting process of contaminated surgical instruments and improve cleanlinessso as to ensure the safety of surgical operation .METHODS Totally 1 200 contaminated items of surgical instruments during Mar .2014 to Jun .2014 were divided into two groups ,the wetted group and the non‐wetted group with 600 items in each group .The technical standard was implemented during the wetting management of contaminated surgical instruments .The results were analyzed to illustrate the importance of a wet condition for the benefit of improving sterilization .RESULTS During the processes of instrument recollection ,transfer ,pre‐cleaning and formal cleaning ,the bacterial colony count was less in the wetted group than in the non‐wetted group at each time point ,indicating that the use of specific humectant inhibited bacterial growth .The cleaning qualified rate reached 100 .0% by visual inspection and 99 .5% by magnifying glass in the wetted group ,higher than 98 .7% and 97 .8% in the non‐wetted group .The

Face, content, and construct validity of four, inanimate training exercises using the da Vinci ® Si surgical system configured with Single-Site ™ instrumentation.

Science.gov (United States)

Jarc, Anthony M; Curet, Myriam

2015-08-01

Validated training exercises are essential tools for surgeons as they develop technical skills to use robot-assisted minimally invasive surgical systems. The purpose of this study was to show face, content, and construct validity of four, inanimate training exercises using the da Vinci (®) Si surgical system configured with Single-Site (™) instrumentation. New (N = 21) and experienced (N = 6) surgeons participated in the study. New surgeons (11 Gynecology [GYN] and 10 General Surgery [GEN]) had not completed any da Vinci Single-Site cases but may have completed multiport cases using the da Vinci system. They participated in this study prior to attending a certification course focused on da Vinci Single-Site instrumentation. Experienced surgeons (5 GYN and 1 GEN) had completed at least 25 da Vinci Single-Site cases. The surgeons completed four inanimate training exercises and then rated them with a questionnaire. Raw metrics and overall normalized scores were computed using both video recordings and kinematic data collected from the surgical system. The experienced surgeons significantly outperformed new surgeons for many raw metrics and the overall normalized scores derived from video review (p da Vinci Single-Site surgery and actually testing the technical skills used during da Vinci Single-Site surgery. In summary, the four training exercises showed face, content, and construct validity. Improved overall scores could be developed using additional metrics not included in this study. The results suggest that the training exercises could be used in an overall training curriculum aimed at developing proficiency in technical skills for surgeons new to da Vinci Single-Site instrumentation.

A technical study of alloy compositions of "brass" wind musical instruments (1651-1867) utilizing non-destructive X-ray fluorescence

Science.gov (United States)

Bacon, Alice Louise

This thesis represents a new interdisciplinary approach to the conservation, care and curatorial study of 'brass' wind musical instruments. It attempts to combine metallurgical, chronological and historical aspects for a selection of instruments. The research consists of the systematic study of seventy-seven musical instruments, by known makers, using standardised non-destructive energy dispersive x-ray fluorescence (XRF). Such compositional data are virtually non-existent for historical 'brass' instruments in Britain and what few technical data that do exist are sporadic in quantity and quality. The development of brass instruments is interwoven with the history of brass making, but because there are a limited number of appropriate examples such links can be difficult to identify. This thesis describes the development of brass production from the cementation process to the commercial production of zinc and modern brass. Its relationship to the musical instrument industry in Britain is linked with historical evidence. It will be shown that innovation and known historical metallurgical achievements are reflected in the compositional changes of the alloys used for musical instruments. This thesis focuses on specific named brass wind musical instrument makers. This thesis sets out to investigate the extent to which a single analytical technique such as non-destructive analysis utilising XRF could be useful in the curatorial and conservation care of musical instruments. The results of the analyses revealed new aspects to the use of metals for making musical instruments. They give new information on approximate alloy compositions and, in particular, the results have shown that in the seventeenth-century in England, a ternary alloy of copper/tin/zinc was used, and that it was, perhaps, only superseded by brass (copper/zinc alloy) in the eighteenth century. It has been possible to arrange the results into a chronology of alloys particularly reflecting the change from the

Shortened OR time and decreased patient risk through use of a modular surgical instrument with artificial intelligence.

Science.gov (United States)

Miller, David J; Nelson, Carl A; Oleynikov, Dmitry

2009-05-01

With a limited number of access ports, minimally invasive surgery (MIS) often requires the complete removal of one tool and reinsertion of another. Modular or multifunctional tools can be used to avoid this step. In this study, soft computing techniques are used to optimally arrange a modular tool's functional tips, allowing surgeons to deliver treatment of improved quality in less time, decreasing overall cost. The investigators watched University Medical Center surgeons perform MIS procedures (e.g., cholecystectomy and Nissen fundoplication) and recorded the procedures to digital video. The video was then used to analyze the types of instruments used, the duration of each use, and the function of each instrument. These data were aggregated with fuzzy logic techniques using four membership functions to quantify the overall usefulness of each tool. This allowed subsequent optimization of the arrangement of functional tips within the modular tool to decrease overall time spent changing instruments during simulated surgical procedures based on the video recordings. Based on a prototype and a virtual model of a multifunction laparoscopic tool designed by the investigators that can interchange six different instrument tips through the tool's shaft, the range of tool change times is approximately 11-13 s. Using this figure, estimated time savings for the procedures analyzed ranged from 2.5 to over 32 min, and on average, total surgery time can be reduced by almost 17% by using the multifunction tool.

Comparison of the Debonding Characteristics of Conventional and New Debonding Instrument used for Ceramic, Composite and Metallic Brackets - An Invitro Study.

Science.gov (United States)

Choudhary, Garima; Gill, Vikas; Reddy, Y N N; Sanadhya, Sudhanshu; Aapaliya, Pankaj; Sharma, Nidhi

2014-07-01

Debonding procedure is time consuming and damaging to the enamel if performed with improper technique. Various debonding methods include: the conventional methods that use pliers or wrenches, an ultrasonic method, electrothermal devices, air pressure impulse devices, diamond burs to grind the brackets off the tooth surface and lasers. Among all these methods, using debonding pliers is most convenient and effective method but has been reported to cause damage to the teeth. Recently, a New Debonding Instrument designed specifically for ceramic and composite brackets has been introduced. As this is a new instrument, little information is available on efficacy of this instrument. The purpose of this study was to evaluate the debonding characteristics of both "the conventional debonding Pliers" and "the New debonding instrument" when removing ceramic, composite and metallic brackets. One Hundred Thirty eight extracted maxillary premolar teeth were collected and divided into two Groups: Group A and Group B (n = 69) respectively. They were further divided into 3 subGroups (n = 23) each according to the types of brackets to be bonded. In subGroups A1 and B1{stainless steel};A2 and B2{ceramic};A3 and B3{composite}adhesive precoated maxillary premolar brackets were used. Among them {ceramic and composite} adhesive pre-coated maxillary premolar brackets were bonded. All the teeth were etched using 37% phosphoric acid for 15 seconds and the brackets were bonded using Transbond XT primer. Brackets were debonded using Conventional Debonding Plier and New Debonding Instrument (Group B). After debonding, the enamel surface of each tooth was examined under stereo microscope (10X magnifications). Amodifiedadhesive remnant index (ARI) was used to quantify the amount of remaining adhesive on each tooth. The observations demonstrate that the results of New Debonding Instrument for debonding of metal, ceramic and composite brackets were statistically significantly different (p = 0

[Evaluation of Medical Instruments Cleaning Effect of Fluorescence Detection Technique].

Science.gov (United States)

Sheng, Nan; Shen, Yue; Li, Zhen; Li, Huijuan; Zhou, Chaoqun

2016-01-01

To compare the cleaning effect of automatic cleaning machine and manual cleaning on coupling type surgical instruments. A total of 32 cleaned medical instruments were randomly sampled from medical institutions in Putuo District medical institutions disinfection supply center. Hygiena System SUREII ATP was used to monitor the ATP value, and the cleaning effect was evaluated. The surface ATP values of the medical instrument of manual cleaning were higher than that of the automatic cleaning machine. Coupling type surgical instruments has better cleaning effect of automatic cleaning machine before disinfection, the application is recommended.

21 CFR 872.4565 - Dental hand instrument.

Science.gov (United States)

2010-04-01

... chisel, endodontic broach, dental wax carver, endodontic pulp canal file, hand instrument for calculus... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Dental hand instrument. 872.4565 Section 872.4565...) MEDICAL DEVICES DENTAL DEVICES Surgical Devices § 872.4565 Dental hand instrument. (a) Identification. A...

Technique for increasing dynamic range of space-borne ion composition instruments

International Nuclear Information System (INIS)

Burch, J.L.; Miller, G.P.; Santos, A. de los; Pollock, C.J.; Pope, S.E.; Valek, P. W.; Young, D.T.

2005-01-01

The dynamic range of ion composition spectrometers is limited by several factors, including saturation of particle counters and spillover of signals from highly dominant species into channels tuned to minor species. Instruments designed for composition measurements of hot plasmas in space can suffer greatly from both of these problems because of the wide energy range required and the wide disparity in fluxes encountered in various regions of interest. In order to detect minor ions in regions of very weak fluxes, geometry factors need to be as large as possible within the mass and volume resources available. As a result, problems with saturation by the dominant fluxes and spillover to minor-ion channels in plasma regions with intense fluxes become especially acute. This article reports on a technique for solving the dynamic-range problem in the few eV to several keV energy/charge range that is of central importance for space physics research where the dominant ion is of low mass/charge (typically H + ), and the minor ions are of higher mass/charge (typically O + ). The technique involves employing a radio-frequency modulation of the deflection electric field in the back section of an electrostatic analyzer in a time-of-flight instrument. This technique is shown to reduce H + counts by a controllable amount of up to factors of 1000 while reducing O + counts by only a few percent that can be calibrated

21 CFR 882.4275 - Dowel cutting instrument.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Dowel cutting instrument. 882.4275 Section 882...) MEDICAL DEVICES NEUROLOGICAL DEVICES Neurological Surgical Devices § 882.4275 Dowel cutting instrument. (a) Identification. A dowel cutting instrument is a device used to cut dowels of bone for bone grafting. (b...

Instrument care: everyone's responsibility

Directory of Open Access Journals (Sweden)

Renée du Toit

2011-12-01

Full Text Available Everyone working in an ophthalmic operating theatre must be competent in the care, handling, storage, and maintenance of instruments. This will help to improve surgical outcomes, maintain an economic and affordable service for patients, and provide a safe environment for the wellbeing of patients and staff.Including instrument care in theatre courses and in-service training is one way of ensuring staff competence.

Pneumatic-type surgical robot end-effector for laparoscopic surgical-operation-by-wire.

Science.gov (United States)

Lee, Chiwon; Park, Woo Jung; Kim, Myungjoon; Noh, Seungwoo; Yoon, Chiyul; Lee, Choonghee; Kim, Youdan; Kim, Hyeon Hoe; Kim, Hee Chan; Kim, Sungwan

2014-09-05

Although minimally invasive surgery (MIS) affords several advantages compared to conventional open surgery, robotic MIS systems still have many limitations. One of the limitations is the non-uniform gripping force due to mechanical strings of the existing systems. To overcome this limitation, a surgical instrument with a pneumatic gripping system consisting of a compressor, catheter balloon, micro motor, and other parts is developed. This study aims to implement a surgical instrument with a pneumatic gripping system and pitching/yawing joints using micro motors and without mechanical strings based on the surgical-operation-by-wire (SOBW) concept. A 6-axis external arm for increasing degrees of freedom (DOFs) is integrated with the surgical instrument using LabVIEW® for laparoscopic procedures. The gripping force is measured over a wide range of pressures and compared with the simulated ideal step function. Furthermore, a kinematic analysis is conducted. To validate and evaluate the system's clinical applicability, a simple peg task experiment and workspace identification experiment are performed with five novice volunteers using the fundamentals of laparoscopic surgery (FLS) board kit. The master interface of the proposed system employs the hands-on-throttle-and-stick (HOTAS) controller used in aerospace engineering. To develop an improved HOTAS (iHOTAS) controller, 6-axis force/torque sensor was integrated in the special housing. The mean gripping force (after 1,000 repetitions) at a pressure of 0.3 MPa was measured to be 5.8 N. The reaction time was found to be 0.4 s, which is almost real-time. All novice volunteers could complete the simple peg task within a mean time of 176 s, and none of them exceeded the 300 s cut-off time. The system's workspace was calculated to be 11,157.0 cm3. The proposed pneumatic gripping system provides a force consistent with that of other robotic MIS systems. It provides near real-time control. It is more durable than the

Teaching Surgical Hysteroscopy with a Computer

Science.gov (United States)

Lefebvre; Cote; Lefebvre

1996-08-01

Using a hysteroscope can be simulated on a computer. It will improve physician training by measuring basic knowledge and abilities, allow different interventions and anatomic variations, minimize the trauma of surgical intervention, and reduce operative casualties. An integrated questionnaire covers instrumentation, fluid infusion, power source, indications and preparation for endometrial ablation, surgical techniques, and complications to evaluate the user's knowledge. The operation simulation then proceeds. In the endometrial cavity, by virtual simulation, the operating field should appear in real time to allow physicians to adapt the trajectory of the instruments. The computer is an IBM PC compatible. We use a modified joystick with optical encoders to know the instrument position. The simulation can be repeated as desired. An evaluation system is integrated in the software to keep the user informed on the amount of burn area(s) that have been completed. This prototype model is available.

Retained Surgical Foreign Bodies after Surgery

Directory of Open Access Journals (Sweden)

Valon A. Zejnullahu

2017-01-01

Full Text Available The problem of retained surgical bodies (RSB after surgery is an issue for surgeons, hospitals and the entire medical team. They have potentially harmful consequences for the patient as they can be life threatening and usually, a further operation is necessary. The incidence of RSB is between 0.3 to 1.0 per 1,000 abdominal operations, and they occur due to a lack of organisation and communication between surgical staff during the process. Typically, the RSB are surgical sponges and instruments located in the abdomen, retroperitoneum and pelvis.

Study of impurity composition of some compounds of refractory metals by instrumental neutron activation analysis

International Nuclear Information System (INIS)

Kaganov, L.K.; Dzhumakulov, D.T.; Mukhamedshina, N.M.

1994-01-01

The compounds of refractory transition metals find wide application in all fields of engineering, in particular in microelectronics to manufacture contact-barrier layers of thin-film current-conducting systems of silicon instruments, large and very large scale integrated circuits. Production of such materials is realted with the need to apply the analytical control methods that allow to determine a large number of elements with high reliability. The instrumental neutron-activation techniques have been developed to determine impurity composition of the following compounds: MoSi 2 , WSi 2 , TiB 2 , NbB 2 , TiC, NbC

Comparison of the Debonding Characteristics of Conventional and New Debonding Instrument used for Ceramic, Composite and Metallic Brackets – An Invitro Study

Science.gov (United States)

Gill, Vikas; Reddy, Y. N. N.; Sanadhya, Sudhanshu; Aapaliya, Pankaj; Sharma, Nidhi

2014-01-01

Background: Debonding procedure is time consuming and damaging to the enamel if performed with improper technique. Various debonding methods include: the conventional methods that use pliers or wrenches, an ultrasonic method, electrothermal devices, air pressure impulse devices, diamond burs to grind the brackets off the tooth surface and lasers. Among all these methods, using debonding pliers is most convenient and effective method but has been reported to cause damage to the teeth. Recently, a New Debonding Instrument designed specifically for ceramic and composite brackets has been introduced. As this is a new instrument, little information is available on efficacy of this instrument. The purpose of this study was to evaluate the debonding characteristics of both “the conventional debonding Pliers” and “the New debonding instrument” when removing ceramic, composite and metallic brackets. Materials and Methods: One Hundred Thirty eight extracted maxillary premolar teeth were collected and divided into two Groups: Group A and Group B (n = 69) respectively. They were further divided into 3 subGroups (n = 23) each according to the types of brackets to be bonded. In subGroups A1 and B1{stainless steel};A2 and B2{ceramic};A3 and B3{composite}adhesive precoated maxillary premolar brackets were used. Among them {ceramic and composite} adhesive pre-coated maxillary premolar brackets were bonded. All the teeth were etched using 37% phosphoric acid for 15 seconds and the brackets were bonded using Transbond XT primer. Brackets were debonded using Conventional Debonding Plier and New Debonding Instrument (Group B). After debonding, the enamel surface of each tooth was examined under stereo microscope (10X magnifications). Amodifiedadhesive remnant index (ARI) was used to quantify the amount of remaining adhesive on each tooth. Results: The observations demonstrate that the results of New Debonding Instrument for debonding of metal, ceramic and composite brackets

[Surgical manipulators in ear surgery: a future vision?].

Science.gov (United States)

Hofer, M; Dietz, A; Strauss, G

2011-04-01

Middle ear surgery bears a high risk for injury of difficult to differentiate risk structures. Thus, a precise preparation in this area must be the surgical task. However, there are human (tremor) and systematic limitations (OR setup, narrow access). Assistance systems in terms of manipulators are so far not part of the clinical routine. Although, they could compensate for the above mentioned limitations. MANIPULATORS: This work reviews existing surgical manipulator systems. The expected value is an elevated patient safety through improving surgical accuracy and the reduction of ergonomic deficits. CLINICAL APPLICATION AND DEVELOPMENT: In clinical application there are simply modified industrial robots, highly complex master slave systems and small miniature master slave systems which are directly located at the patient. A disadvantage of most systems is the limited number of applicable instruments. Often, only especially designed instruments can be used. The goal in development should be to create a compact, short distance operated master slave system. The usability of standard (already available) instruments with an easy integration into the surgical and sterilisation procedure would lower the threshold for acceptance of such systems.The surgeon will remain the key player. He can only work efficiently in an ergonomic environment and will always have the responsibility for the intervention. From the authors perspective, highly automated systems should not be the research goal. © Georg Thieme Verlag KG Stuttgart · New York.

Adherence to the use of the surgical checklist for patient safety

Directory of Open Access Journals (Sweden)

Eliane Cristina Sanches Maziero

Full Text Available Objective: Evaluate adherence to the checklist of the Programa Cirurgias Seguras (safe surgery programme at a teaching hospital. Methods: Evaluative study conducted at a teaching hospital in the south of Brazil in 2012. Data were collected by means of non-participant observation in 20 hip and knee replacement surgeries and an instrument that was created for research based on the checklist and used by the institution. Results: In the observed procedures (n = 20 there was significant adhesion (p<0.05 to the instrument in relation to the verification of documentation, fasting, hair removal in the surgical site, absence of nail varnish and accessories, identification of the patient and surgical site on admission to the surgical unit, availability of blood and functionality of materials. However, there was no significant adherence to the checklist in the operating room in relation to patient identification, procedure and laterality, team introduction, surgical break and materials count. Conclusion: The results showed that the items on the checklist were verified nonverbally and there was no significant adherence to the instrument.

21 CFR 872.4120 - Bone cutting instrument and accessories.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Bone cutting instrument and accessories. 872.4120... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Surgical Devices § 872.4120 Bone cutting instrument and accessories. (a) Identification. A bone cutting instrument and accessories is a metal device intended for use...

Robotic technologies in surgical oncology training and practice.

Science.gov (United States)

Orvieto, Marcelo A; Marchetti, Pablo; Castillo, Octavio A; Coelho, Rafael F; Chauhan, Sanket; Rocco, Bernardo; Ardila, Bobby; Mathe, Mary; Patel, Vipul R

2011-09-01

The modern-day surgeon is frequently exposed to new technologies and instrumentation. Robotic surgery (RS) has evolved as a minimally invasive technique aimed to improve clinical outcomes. RS has the potential to alleviate the inherent limitations of laparoscopic surgery such as two dimensional imaging, limited instrument movement and intrinsic human tremor. Since the first reported robot-assisted surgical procedure performed in 1985, the technology has dramatically evolved and currently multiple surgical specialties have incorporated RS into their daily clinical armamentarium. With this exponential growth, it should not come as a surprise the ever growing requirement for surgeons trained in RS as well as the interest from residents to receive robotic exposure during their training. For this reason, the establishment of set criteria for adequate and standardized training and credentialing of surgical residents, fellows and those trained surgeons wishing to perform RS has become a priority. In this rapidly evolving field, we herein review the past, present and future of robotic technologies and its penetration into different surgical specialties. Copyright © 2010 Elsevier Ltd. All rights reserved.

Single-stage posterior transforaminal lumbar interbody fusion, debridement, limited decompression, 3-column reconstruction, and posterior instrumentation in surgical treatment for single-segment lumbar spinal tuberculosis

OpenAIRE

Zeng, Hao; Wang, Xiyang; Zhang, Penghui; Peng, Wei; Zhang, Yupeng; Liu, Zheng

2015-01-01

Objective: The aim of this study is to determine the feasibility and efficacy of surgical management of single-segment lumbar spinal tuberculosis (TB) by using single-stage posterior transforaminal lumbar interbody fusion, debridement, limited decompression, 3-column reconstruction, and posterior instrumentation.Methods: Seventeen cases of single-segment lumbar TB were treated with single-stage posterior transforaminal lumbar interbody fusion, debridement, limited decompression, 3-column reco...

Surgical Emphysema: A Rare Complication of a Simple Surgical Dental Extraction Without the Use of an Air-Driven Rotor.

Science.gov (United States)

Gowans, Keegan; Patel, Muneer; Lewis, Khari

2017-03-01

Surgical emphysema is a rare complication of dental extractions, often associated with the use of high-speed air rotors. This report describes a case of extensive surgical emphysema following a simple surgical extraction of a LL6 under local anaesthetic. There was no use of air-driven handpieces during the procedure. The patient developed extensive surgical emphysema bi-laterally in both cervical neck and facial planes. After prophylactic antibiotics with careful monitoring in a secondary care setting, the patient made a full unremarkable recovery. Clinical relevance: Simple extraction of teeth is a procedure carried out daily by most general dental practitioners. However, the risk of surgical emphysema without the use of high-speed air rotors or instruments using pressurized air/water is not well known or documented.

Evaluation of the Factors Affecting the Loss of Lumbar Lordosis in Surgical Treatment of Patients with Adolescent Idiopathic Scoliosis Using Segmental Instrumentation

Directory of Open Access Journals (Sweden)

Farshad Nikouei

2016-12-01

Full Text Available Background The identification of independent factors affecting the loss of lumbar lordosis can facilitate programmed surgery in adolescent idiopathic scoliosis (AIS patients especially with considering the importance of sagittal characteristics. Objectives This study aimed to investigate the factors affecting the amount of the loss of lumbar lordosis in surgical treatment of the patients with AIS using segmental instrumentation. Methods In this study which was conducted in three years, 91 AIS patients who underwent segmental instrumentation were studied and 63 patients remained in the study according to the inclusion criteria. All patients’ information was recorded on admission in separate forms and radiography results were coded and archived before the surgery for more evaluation. All patients were subject to standing whole spine radiograph again 12 months after the surgery. Ultimately, the information was put into predetermined forms and was used for a statistical analysis after the completion of forms. Results The mean age of the patients was 15.62 ± 3.09 years. The mean preoperative lumbar lordosis was 45.25 ± 12.17 degrees and the mean preoperative thoracic kyphosis was 41.54 ± 16.31 degrees. The mean postoperative lumbar lordosis was 34.37 ± 10.26 degrees. The mean postoperative thoracic kyphosis was obtained 26.56 ± 9.17. The mean surgical correction of thoracic kyphotic deformity and lumbar lordosis were correlated with each other with the correlation coefficient of 0.71 (P < 0.001. Men have more (16.62 ± 8.74 loss of lumbar lordosis than women (10.05 ± 8.53 (P < 0.001. There was not any significant correlation between the type (hook/hybrid of the instrumentation with the loss of lumbar lordosis (P = 0.07, P = 0.41. Conclusions Considering the findings of this study, the most important factor affecting the amount of post-operative loss of lumbar lordosis in segmental instrumentation in AIS patients is the amount of the

Cost assessment of instruments for single-incision laparoscopic cholecystectomy

DEFF Research Database (Denmark)

Henriksen, Nadia A; Al-Tayar, Haytham; Rosenberg, Jacob

2012-01-01

Specially designed surgical instruments have been developed for single-incision laparoscopic surgery, but high instrument costs may impede the implementation of these procedures. The aim of this study was to compare the cost of operative implements used for elective cholecystectomy performed...

Computer-Assisted Technique for Surgical Tooth Extraction

Directory of Open Access Journals (Sweden)

Hosamuddin Hamza

2016-01-01

Full Text Available Introduction. Surgical tooth extraction is a common procedure in dentistry. However, numerous extraction cases show a high level of difficulty in practice. This difficulty is usually related to inadequate visualization, improper instrumentation, or other factors related to the targeted tooth (e.g., ankyloses or presence of bony undercut. Methods. In this work, the author presents a new technique for surgical tooth extraction based on 3D imaging, computer planning, and a new concept of computer-assisted manufacturing. Results. The outcome of this work is a surgical guide made by 3D printing of plastics and CNC of metals (hybrid outcome. In addition, the conventional surgical cutting tools (surgical burs are modified with a number of stoppers adjusted to avoid any excessive drilling that could harm bone or other vital structures. Conclusion. The present outcome could provide a minimally invasive technique to overcome the routine complications facing dental surgeons in surgical extraction procedures.

Elementary composition of the siderurgy slag by instrumental neutron activation analysis

International Nuclear Information System (INIS)

Oliveira, Helder de; Piau, Wilson Caixeta; Mortatti, Jefferson; Sarries, Gabriel Adrian

2000-01-01

The slag has been applied to the ground to neutralize its acidity, in similar way to the calcareous rock, contributing in the agriculture as corrective of the acidity alone it and source of nutrients for the plants. However, the alternative for the agricultural slag exploitation is related to metal texts heavy gifts in the slag. The objective of the present work was to survey of the chemical composition of trashes generated in blast high-oven, steel, oven of pan and fertilizers that had used in its manufacture slag of siderurgy for the technique of instrumental neutron activation analysis. The results had evidenced the existence of high variations in the elements Ce, Cr, In, K, Sb and Zn in the distinct analyzed samples. (author)

Surgical Robotics Research in Cardiovascular Disease

Energy Technology Data Exchange (ETDEWEB)

Pohost, Gerald M; Guthrie, Barton L; Steiner, Charles

2008-02-29

This grant is to support a research in robotics at three major medical centers: the University of Southern California-USC- (Project 1); the University of Alabama at Birmingham-UAB-(Project 2); and the Cleveland Clinic Foundation-CCF-(Project 3). Project 1 is oriented toward cardiovascular applications, while projects 2 and 3 are oriented toward neurosurgical applications. The main objective of Project 1 is to develop an approach to assist patients in maintaining a constant level of stress while undergoing magnetic resonance imaging or spectroscopy. The specific project is to use handgrip to detect the changes in high energy phosphate metabolism between rest and stress. The high energy phosphates, ATP and phosphocreatine (PCr) are responsible for the energy of the heart muscle (myocardium) responsible for its contractile function. If the blood supply to the myocardium in insufficient to support metabolism and contractility during stress, the high energy phosphates, particularly PCr, will decrease in concentration. The high energy phosphates can be tracked using phosphorus-31 magnetic resonance spectroscopy ({sup 31}P MRS). In Project 2 the UAB Surgical Robotics project focuses on the use of virtual presence to assist with remote surgery and surgical training. The goal of this proposal was to assemble a pilot system for proof of concept. The pilot project was completed successfully and was judged to demonstrate that the concept of remote surgical assistance as applied to surgery and surgical training was feasible and warranted further development. The main objective of Project 3 is to develop a system to allow for the tele-robotic delivery of instrumentation during a functional neurosurgical procedure (Figure 3). Instrumentation such as micro-electrical recording probes or deep brain stimulation leads. Current methods for the delivery of these instruments involve the integration of linear actuators to stereotactic navigation systems. The control of these delivery

Surgical Robotics Research in Cardiovascular Disease

International Nuclear Information System (INIS)

Pohost, Gerald M; Guthrie, Barton L; Steiner, Charles

2008-01-01

This grant is to support a research in robotics at three major medical centers: the University of Southern California-USC- (Project 1); the University of Alabama at Birmingham-UAB-(Project 2); and the Cleveland Clinic Foundation-CCF-(Project 3). Project 1 is oriented toward cardiovascular applications, while projects 2 and 3 are oriented toward neurosurgical applications. The main objective of Project 1 is to develop an approach to assist patients in maintaining a constant level of stress while undergoing magnetic resonance imaging or spectroscopy. The specific project is to use handgrip to detect the changes in high energy phosphate metabolism between rest and stress. The high energy phosphates, ATP and phosphocreatine (PCr) are responsible for the energy of the heart muscle (myocardium) responsible for its contractile function. If the blood supply to the myocardium in insufficient to support metabolism and contractility during stress, the high energy phosphates, particularly PCr, will decrease in concentration. The high energy phosphates can be tracked using phosphorus-31 magnetic resonance spectroscopy ( 31 P MRS). In Project 2 the UAB Surgical Robotics project focuses on the use of virtual presence to assist with remote surgery and surgical training. The goal of this proposal was to assemble a pilot system for proof of concept. The pilot project was completed successfully and was judged to demonstrate that the concept of remote surgical assistance as applied to surgery and surgical training was feasible and warranted further development. The main objective of Project 3 is to develop a system to allow for the tele-robotic delivery of instrumentation during a functional neurosurgical procedure (Figure 3). Instrumentation such as micro-electrical recording probes or deep brain stimulation leads. Current methods for the delivery of these instruments involve the integration of linear actuators to stereotactic navigation systems. The control of these delivery devices

[ANALYSIS OF THE SURGICAL TREATMENT RESULTS IN THE THYROID GLAND DISEASES].

Science.gov (United States)

Tarashchenko, Yu N; Bolgov, M Yu

2015-08-01

The results of surgical treatment of the thyroid gland diseases were analyzed, including the specific morbidity rate, cosmetic effect of the operation, stationary treatment of patients duration, the operation radicalism. Improvement of the operation methods and introduction of modern electric surgical instruments have permitted to reduce the operation duration, the surgical access length, the rate of postoperative hypocalcaemia occurrence, duration of the patients stationary treatment.

RESULTS OF SURGICAL TREATMENT OF INFANTILE AND JUVENILE SCOLIOSIS USING VARIOUS INSTRUMENTATION

Directory of Open Access Journals (Sweden)

M. V. Mikhailovsky

2015-01-01

Full Text Available Introduction. The analysis Results of surgical treatment of growing children with infantile and juvenile scoliosis (IS can the optimal method of treatment select. In young children with significant growth potential spinal fusion may not be the best option as it limits further longitudinal growth of the spine and may to the thoracic insufficiency syndrome result. To address this problem recently several techniques focused, their have advantages and drawbacks.Material and methods. Since 2008 year 127 patients (64 girls, 63 boys aged (4.5 ± 2.1 years were operated on. In group I 65 patients were operated on using VEPTR (Vertical Expandable Prosthetic Titanium Rib instrumentation, in group II 42 patients using various spinal instrumentation. 20 patients with congenital kyphosis were excluded. The average follow-up time was (5.6 ± 1.1 years.Results. In group I average value of the primary scoliotic curve before surgery was (74.7 ± 22.9, secondary curve (42.8 ± 16.0, thoracic kyphosis (46.3 ± 27.4, lumbar lordosis (54.6 ± 14. Average value of the primary scoliotic curve after surgery was reduced to (51 ± 20 (correction 31.7%, at followup to (56.5 ± 18.5, secondary curve (31.8 ± 12.8 (25.7%, at follow-up to (32.4 ± 18.4, thoracic kyphosis (36.8 ± 20.8 (20,5%, at follow-up to (41.8 ± 21.0, lumbar lordosis (45.4 ± 12.7 (16,9%, at follow-up to (48.2 ± 11.7 (p < 0.05. Space available for lung before surgery was (84.5 ± 8.7 %, after surgery was (94.8 ± 6.7%, at follow-up increased to (98.6 ± 5.4 % (p < 0.05. Complications included 11 implant dislocations and 1 infection. In group II average value of the primary scoliotic curve before surgery was (87.6 ± 6.6, secondary curve (47.8 ± 4.6, thoracic kyphosis (61.4 ± 10.4, lumbar lordosis (61.8 ± 4.9. Average value of the primary scoliotic curve after surgery was reduced to 50.6 ± 5.3 (correction 42.3%, at follow-up to (66.1 ± 6.3�

Compact teleoperated laparoendoscopic single-site robotic surgical system: Kinematics, control, and operation.

Science.gov (United States)

Isaac-Lowry, Oran Jacob; Okamoto, Steele; Pedram, Sahba Aghajani; Woo, Russell; Berkelman, Peter

2017-12-01

To date a variety of teleoperated surgical robotic systems have been developed to improve a surgeon's ability to perform demanding single-port procedures. However typical large systems are bulky, expensive, and afford limited angular motion, while smaller designs suffer complications arising from limited motion range, speed, and force generation. This work was to develop and validate a simple, compact, low cost single site teleoperated laparoendoscopic surgical robotic system, with demonstrated capability to carry out basic surgical procedures. This system builds upon previous work done at the University of Hawaii at Manoa and includes instrument and endoscope manipulators as well as compact articulated instruments designed to overcome single incision geometry complications. A robotic endoscope holder was used for the base, with an added support frame for teleoperated manipulators and instruments fabricated mostly from 3D printed parts. Kinematics and control methods were formulated for the novel manipulator configuration. Trajectory following results from an optical motion tracker and sample task performance results are presented. Results indicate that the system has successfully met the goal of basic surgical functionality while minimizing physical size, complexity, and cost. Copyright © 2017 John Wiley & Sons, Ltd.

Automatic data-driven real-time segmentation and recognition of surgical workflow.

Science.gov (United States)

Dergachyova, Olga; Bouget, David; Huaulmé, Arnaud; Morandi, Xavier; Jannin, Pierre

2016-06-01

With the intention of extending the perception and action of surgical staff inside the operating room, the medical community has expressed a growing interest towards context-aware systems. Requiring an accurate identification of the surgical workflow, such systems make use of data from a diverse set of available sensors. In this paper, we propose a fully data-driven and real-time method for segmentation and recognition of surgical phases using a combination of video data and instrument usage signals, exploiting no prior knowledge. We also introduce new validation metrics for assessment of workflow detection. The segmentation and recognition are based on a four-stage process. Firstly, during the learning time, a Surgical Process Model is automatically constructed from data annotations to guide the following process. Secondly, data samples are described using a combination of low-level visual cues and instrument information. Then, in the third stage, these descriptions are employed to train a set of AdaBoost classifiers capable of distinguishing one surgical phase from others. Finally, AdaBoost responses are used as input to a Hidden semi-Markov Model in order to obtain a final decision. On the MICCAI EndoVis challenge laparoscopic dataset we achieved a precision and a recall of 91 % in classification of 7 phases. Compared to the analysis based on one data type only, a combination of visual features and instrument signals allows better segmentation, reduction of the detection delay and discovery of the correct phase order.

Debridement of vaginal radiation ulcers using the surgical Ultrasonic Aspirator

International Nuclear Information System (INIS)

Vanderburgh, E.; Nahhas, W.A.

1990-01-01

The surgical Ultrasonic Aspirator (USA) is a fairly new surgical instrument used for an increasingly wide range of procedures. This paper introduces a new application: debridement of vulvovaginal necrotic ulcers resulting from intracavitary radiation therapy. The ultrasonic aspirator allowed removal of the soft, necrotic tissue while preserving underlying healthy, firm tissue and blood vessels

Modern spinal instrumentation. Part 1: Normal spinal implants

International Nuclear Information System (INIS)

Davis, W.; Allouni, A.K.; Mankad, K.; Prezzi, D.; Elias, T.; Rankine, J.; Davagnanam, I.

2013-01-01

The general radiologist frequently encounters studies demonstrating spinal instrumentation, either as part of the patient's postoperative evaluation or as incidental to a study performed for another purpose. There are various surgical approaches and devices used in spinal surgery with an increased understanding of spinal and spinal implant biomechanics drives development of modern fixation devices. It is, therefore, important that the radiologist can recognize commonly used devices and identify their potential complications demonstrated on imaging. The aim of part 1 of this review is to familiarize the reader with terms used to describe surgical approaches to the spine, review the function and normal appearances of commonly used instrumentations, and understand the importance of the different fixation techniques. The second part of this review will concentrate on the roles that the different imaging techniques play in assessing the instrumented spine and the recognition of complications that can potentially occur.

Design and implementation of a wireless instrument adapter

DEFF Research Database (Denmark)

Laino, Kaori V.; Saathoff, Thore; Savarimuthu, Thiusius R.

2018-01-01

The evaluation of new methods for control and manipulation in minimally invasive robotic surgery requires a realistic setup. To decouple the evaluation of methods from overall clinical systems, we propose an instrument adapter for the S line EndoWrist\\c{opyright} instruments of the da Vinci...... surgical system. The adapter is small and lightweight and can be mounted to any robot to mimic motion. We describe its design and implementation, as well as a setup to calibrate instruments to study precise motion control. Our results indicate that each instrument requires individual calibration...

Load evaluation of the da Vinci surgical system for transoral robotic surgery.

Science.gov (United States)

Fujiwara, Kazunori; Fukuhara, Takahiro; Niimi, Koji; Sato, Takahiro; Kitano, Hiroya

2015-12-01

Transoral robotic surgery, performed with the da Vinci surgical system (da Vinci), is a surgical approach for benign and malignant lesions of the oral cavity and laryngopharynx. It provides several unique advantages, which include a 3-dimensional magnified view and ability to see and work around curves or angles. However, the current da Vinci surgical system does not provide haptic feedback. This is problematic because the potential risks specific to the transoral use of the da Vinci include tooth injury, mucosal laceration, ocular injury and mandibular fracture. To assess the potential for intraoperative injuries, we measured the load of the endoscope and the instrument of the da Vinci Si surgical system. We pressed the endoscope and instrument of the da Vinci Si against Load cell six times each and measured the dynamic load and the time-to-maximum load. We also struck the da Vinci Si endoscope and instrument against the Load cell six times each and measured the impact load. The maximum dynamic load was 7.27 ± 1.31 kg for the endoscope and 1.90 ± 0.72 for the instrument. The corresponding time-to-maximum loads were 1.72 ± 0.22 and 1.29 ± 0.34 s, but the impact loads were significantly lower than the dynamic load. It remains possible that a major load is exerted on adjacent structures by continuous contact with the endoscope and instrument of da Vinci Si. However, there is a minor delay in reaching the maximum load. Careful monitoring by an on-site assistant may, therefore, help prevent contiguous injury.

Three-Dimensional Printing Surgical Applications.

Science.gov (United States)

AlAli, Ahmad B; Griffin, Michelle F; Butler, Peter E

2015-01-01

Three-dimensional printing, a technology used for decades in the industrial field, gains a lot of attention in the medical field for its potential benefits. With advancement of desktop printers, this technology is accessible and a lot of research is going on in the medical field. To evaluate its application in surgical field, which may include but not limited to surgical planning, surgical education, implants, and prosthesis, which are the focus of this review. Research was conducted by searching PubMed, Web of science, and other reliable sources. We included original articles and excluded articles based on animals, those more than 10 years old, and those not in English. These articles were evaluated, and relevant studies were included in this review. Three-dimensional printing shows a potential benefit in surgical application. Printed implants were used in patient in a few cases and show successful results; however, longer follow-up and more trials are needed. Surgical and medical education is believed to be more efficient with this technology than the current practice. Printed surgical instrument and surgical planning are also believed to improve with three-dimensional printing. Three-dimensional printing can be a very powerful tool in the near future, which can aid the medical field that is facing a lot of challenges and obstacles. However, despite the reported results, further research on larger samples and analytical measurements should be conducted to ensure this technology's impact on the practice.

Characteristic Elemental Composition of Oil Pigments using Instrumental Neutron Activation Analysis

International Nuclear Information System (INIS)

Chung, Yong Sam; Kim, Sun Ha; Sun, Gwang Min; Lim, Jong Myung; Moon, Jong Hwa; Kim, Young Jin; Lim, Sung Jin; Song, Yu Na; Kim, Ken

2009-01-01

The principal aim of this study is to identify the applicability of instrumental neutron activation analysis as a non-destructive examination tool for the quantitative composition analysis associated with authentication, restoration, and conservation of art objects in the field of cultural heritage. Generally, the chemical composition of pigments are associated with the colors such as white, yellow, orange, red, green, blue and black, and it varies with raw materials of pigments. According to the colors of a different pigments, chemical compositions are as follows; for example, white pigments were used for a mixture of Pb(CO 3 ) 2 , PbSO 4 , PbO, Pb(OH) 2 , ZnO, ZnS, TiO 2 , BaSO 4 , CaCO 3 , Al 2 O 3 , As 2 S 3 , etc.; black pigments were series of carbon black, borne ash, MnO+Mn 2 O 3 , etc.; red pigments were Fe 2 O 3 , Pb 3 O 4 , HgS, PbMo 4 , CdS+CdSe, etc.; brown and yellow pigments were PbCrO 4 , ZnCrO 4 , CdS-ZnS, K 3 [Co(NO 2 ) 6 ], Pb(SbO 3 ) 2 , C 19 H 16 O 11 Mg, SrCrO 4 , etc.; green pigments were Cr 2 O 3 , Cr 2 O(OH) 4 , Cu(C 2 H 3 O 2 )-2Cu(OH) 2 ), Cr 2 O 3 -Al 2 O 3 -CoO, etc.; blue pigments were Fe 4 [Fe(CN) 6 ] 3 , CoO-Al 2 O 3 , Na 8 - 10 Al 6 Si 6 O 24 S 2-4 , etc. This first step is to obtain quantitative data on the concentrations of major, minor and trace elements in oil pigments and to explain pigment sources by statistical treatment as reported in many literatures. The determination of major, minor and micro elements in the subject materials are essential in many fields of basic science and technology as well as commercial and industrial fields. In particular, direct analysis of a sample offers a more effective investigation method in these fields. Instrumental neutron activation analysis (INAA) has an inherent advantage of being a non-destructive, simultaneously multi-elemental analysis with high accuracy and sensitivity. In order to characterize the elemental contents of art objects, the quantitative analysis of oil pigment series was

Status of safeguards instrumentation

International Nuclear Information System (INIS)

Higinbotham, W.A.

The International Atomic Energy Agency is performing safeguards at some nuclear power reactors, 50 bulk processing facilities, and 170 research facilities. Its verification activities require the use of instruments to measure nuclear materials and of surveillance instruments to maintain continuity of knowledge of the locations of nuclear materials. Instruments that are in use and under development to measure weight, volume, concentration, and isotopic composition of nuclear materials, and the major surveillance instruments, are described in connection with their uses at representative nuclear facilities. The current status of safeguards instrumentation and the needs for future development are discussed

Surgical management of Gerhardt syndrome.

Science.gov (United States)

Chirilă, M; Mureşan, R; Cosgarea, M; Tomescu, E

2010-01-01

Adduction bilateral vocal fold immobility syndrome may be due by both recurrent laryngeal nerves paralysis--Gerhardt syndrome--and all intrinsic laryngeal muscles paralysis--Riegel syndrome. Etiology of Gerhardt syndrome is thyroid surgery, intubation's maneuver, trauma, neurological disorders, extrala-ryngeal malignancies. The manifestations of Gerhardt syndrome are inspiratory dyspnea and slightly influenced voicing by paramedian vocal folds paralysis with an important narrowing of the airway at the glottic level. The surgical procedures for enlargement of the glottic space can be classified in many ways and their major characteristics are: changes at the glottic level; surgical approach: open neck or endoscopic, with or without opening of the mucosal lining; the need for tracheostomy; the equipment used. The aim of this review is to expound the variety of interventions through the last century marked by the development of the diagnostic methods, the anesthesia and the surgical armament with sophisticated instruments and technologies.

The methodological quality of systematic reviews comparing temporomandibular joint disorder surgical and non-surgical treatment

Directory of Open Access Journals (Sweden)

Vasconcelos Belmiro CE

2008-09-01

Full Text Available Abstract Background Temporomandibular joint disorders (TMJD are multifactor, complex clinical problems affecting approximately 60–70% of the general population, with considerable controversy about the most effective treatment. For example, reports claim success rates of 70% and 83% for non-surgical and surgical treatment, whereas other reports claim success rates of 40% to 70% for self-improvement without treatment. Therefore, the purpose of this study was to (1 identify systematic reviews comparing temporomandibular joint disorder surgical and non-surgical treatment, (2 evaluate their methodological quality, and (3 evaluate the evidence grade within the systematic reviews. Methods A search strategy was developed and implemented for MEDLINE, Cochrane Library, LILACS, and Brazilian Dentistry Bibliography databases. Inclusion criteria were: systematic reviews (± meta-analysis comparing surgical and non-surgical TMJD treatment, published in English, Spanish, Portuguese, Italian, or German between the years 1966 and 2007(up to July. Exclusion criteria were: in vitro or animal studies; narrative reviews or editorials or editorial letters; and articles published in other languages. Two investigators independently selected and evaluated systematic reviews. Three different instruments (AMSTAR, OQAQ and CASP were used to evaluate methodological quality, and the results averaged. The GRADE instrument was used to evaluate the evidence grade within the reviews. Results The search strategy identified 211 reports; of which 2 were systematic reviews meeting inclusion criteria. The first review met 23.5 ± 6.0% and the second met 77.5 ± 12.8% of the methodological quality criteria (mean ± sd. In these systematic reviews between 9 and 15% of the trials were graded as high quality, and 2 and 8% of the total number of patients were involved in these studies. Conclusion The results indicate that in spite of the widespread impact of TMJD, and the multitude of

The impact of the use of different types of gloves and bare hands for preparation of clean surgical instruments.

Science.gov (United States)

Bruna, Camila Quartim de Moraes; Souza, Rafael Queiroz de; Massaia, Irineu Francisco Silva; Cruz, Áurea Silveira; Graziano, Kazuko Uchikawa

2016-10-10

to determine if there are differences on the safety of the preparation of clean surgical instruments using different types of gloves and bare hands and evaluate the microbiological load of these preparations without gloves. laboratory procedure with a pragmatic approach, in which the samples were handled with different types of gloves and bare hands. In addition, cytotoxicity assays were carried out by means of the agar diffusion method. Further samples were subjected to microbiological analysis after being handled without gloves. none of the samples showed cytotoxic effect. All microbiological cultures showed growth of microorganisms, but no microorganism has been recovered after autoclaving. there were no differences in the cytotoxic responses regarding the use of different types of gloves and bare hands in the handling of clean surgical instruments, which could entail iatrogenic risk. It is noteworthy that the use of gloves involves increase in the costs of process and waste generation, and the potential allergenic risk to latex. determinar se existe diferenças na segurança do preparo de instrumentais cirúrgicos relacionada ao uso de distintos tipos de luvas e das mãos nuas no preparo, e avaliar a carga microbiológica destes preparados sem luvas. experimento laboratorial com abordagem pragmática, onde amostras foram manipuladas com diferentes tipos de luvas e com as mãos nuas, elaborado teste de citotoxicidade por meio da difusão em ágar. Outras Amostras sofreram análise microbiológica após serem manipuladas sem luvas. nenhuma das amostras apresentou efeito citotóxico. Todas as culturas microbiológicas apresentaram crescimento de microrganismos, embora nenhum microrganismo tenha sido recuperado após a autoclavação. não houve diferenças nas respostas citotóxicas relacionadas ao uso de diferentes tipos de luvas e das mãos nuas na manipulação do instrumental cirúrgico limpo que sinalizasse risco de iatrogenia. Ressalta-se que o uso de luvas

Comparison between carbondioxide laser and cold instruments in treatment of vocal nodule

International Nuclear Information System (INIS)

Kundi, N.A.; Qayyum, A.; Ahmed, B.; Raza, M.

2013-01-01

Background: Vocal cord nodules are one of the most frequent disorders in both children and adults who use their voice excessively. Main symptom with which patient presents is hoarseness of voice. The treatment in early stages is voice therapy. Various methods are used for its treatment e.g. surgical removal with cold instruments and carbon dioxide laser ablation. Response to the treatment is measured by improvement in voice quality. Objective: To compare the results of Carbon dioxide laser and cold instruments in the treatment of vocal nodule. Study Design: Quasi-experimental study. Place and Duration of Study: This study was conducted at Otolaryngology Department Combined Military Hospital Rawalpindi. Patients and Methods: In this study 50 patients undergoing treatment of vocal cord nodule were included, 25 patients were treated by surgical removal with cold instruments and 25 patients were treated with carbon dioxide laser ablation. The main comparative outcomes were measured by patients' perception of voice quality (worse, same, improved) one week post operatively. Results: Improvement in voice quality with carbon dioxide laser was found to be clinically superior. Voice quality was significantly improved as compared to cold surgical instruments. Conclusion: Carbon dioxide laser causes early improvement in quality of voice as compared to cold instruments in the treatment of vocal nodules. (author)

Instrumentation for tropospheric aerosol characterization

Energy Technology Data Exchange (ETDEWEB)

Shi, Z.; Young, S.E.; Becker, C.H.; Coggiola, M.J. [SRI International, Menlo Park, CA (United States); Wollnik, H. [Giessen Univ. (Germany)

1997-12-31

A new instrument has been developed that determines the abundance, size distribution, and chemical composition of tropospheric and lower stratospheric aerosols with diameters down to 0.2 {mu}m. In addition to aerosol characterization, the instrument also monitors the chemical composition of the ambient gas. More than 25.000 aerosol particle mass spectra were recorded during the NASA-sponsored Subsonic Aircraft: Contrail and Cloud Effects Special Study (SUCCESS) field program using NASA`s DC-8 research aircraft. (author) 7 refs.

Instrumentation for tropospheric aerosol characterization

Energy Technology Data Exchange (ETDEWEB)

Shi, Z; Young, S E; Becker, C H; Coggiola, M J [SRI International, Menlo Park, CA (United States); Wollnik, H [Giessen Univ. (Germany)

1998-12-31

A new instrument has been developed that determines the abundance, size distribution, and chemical composition of tropospheric and lower stratospheric aerosols with diameters down to 0.2 {mu}m. In addition to aerosol characterization, the instrument also monitors the chemical composition of the ambient gas. More than 25.000 aerosol particle mass spectra were recorded during the NASA-sponsored Subsonic Aircraft: Contrail and Cloud Effects Special Study (SUCCESS) field program using NASA`s DC-8 research aircraft. (author) 7 refs.

Compact instrument for fluorescence image-guided surgery

Science.gov (United States)

Wang, Xinghua; Bhaumik, Srabani; Li, Qing; Staudinger, V. Paul; Yazdanfar, Siavash

2010-03-01

Fluorescence image-guided surgery (FIGS) is an emerging technique in oncology, neurology, and cardiology. To adapt intraoperative imaging for various surgical applications, increasingly flexible and compact FIGS instruments are necessary. We present a compact, portable FIGS system and demonstrate its use in cardiovascular mapping in a preclinical model of myocardial ischemia. Our system uses fiber optic delivery of laser diode excitation, custom optics with high collection efficiency, and compact consumer-grade cameras as a low-cost and compact alternative to open surgical FIGS systems. Dramatic size and weight reduction increases flexibility and access, and allows for handheld use or unobtrusive positioning over the surgical field.

Adjacent segment infection after surgical treatment of spondylodiscitis.

Science.gov (United States)

Siam, Ahmed Ezzat; El Saghir, Hesham; Boehm, Heinrich

2016-03-01

This is the first case series to describe adjacent segment infection (ASI) after surgical treatment of spondylodiscitis (SD). Patients with SD, spondylitis who were surgically treated between 1994 and 2012 were included. Out of 1187 cases, 23 (1.94 %) returned to our institution (Zentralklinik Bad Berka) with ASI: 10 males, 13 females, with a mean age of 65.1 years and a mean follow-up of 69 months. ASI most commonly involved L3-4 (seven patients), T12-L1 (five) and L2-3 (four). The mean interval between operations of primary infection and ASI was 36.9 months. All cases needed surgical intervention, debridement, reconstruction and fusion with longer instrumentation, with culture and sensitivity-based postoperative antimicrobial therapy. At last follow-up, six patients (26.1 %) were mobilized in a wheelchair with a varying degree of paraplegia (three had pre-existing paralysis). Three patients died within 2 months after the ASI operation (13 %). Excellent outcomes were achieved in five patients, and good in eight. Adjacent segment infection after surgical treatment of spondylodiscitis is a rare complication (1.94 %). It is associated with multimorbidity and shows a high mortality rate and a high neurological affection rate. Possible explanations are: haematomas of repeated micro-fractures around screw loosening, haematogenous spread, direct inoculation or a combination of these factors. ASI may also lead to proximal junctional kyphosis, as found in this series. We suggest early surgical intervention with anterior debridement, reconstruction and fusion with posterior instrumentation, followed by antimicrobial therapy for 12 weeks. Level IV retrospective uncontrolled case series.

[Organising an instrumental elective abortion].

Science.gov (United States)

Brûlé, Annie

2015-12-01

Family planning centres are structures designed to receive and care for women requesting elective abortions. Here the specially trained, dedicated teams offer personalised care. The instrumental elective abortion is prepared in the same way as a surgical procedure and is subject to the same monitoring. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Evolution of surgical skills training

Science.gov (United States)

Roberts, Kurt E; Bell, Robert L; Duffy, Andrew J

2006-01-01

Surgical training is changing: one hundred years of tradition is being challenged by legal and ethical concerns for patient safety, work hours restrictions, the cost of operating room time, and complications. Surgical simulation and skills training offers an opportunity to teach and practice advanced skills outside of the operating room environment before attempting them on living patients. Simulation training can be as straight forward as using real instruments and video equipment to manipulate simulated “tissue” in a box trainer. More advanced, virtual reality simulators are now available and ready for widespread use. Early systems have demonstrated their effectiveness and discriminative ability. Newer systems enable the development of comprehensive curricula and full procedural simulations. The Accreditation Council of Graduate Medical Education’s (ACGME) has mandated the development of novel methods of training and evaluation. Surgical organizations are calling for methods to ensure the maintenance of skills, advance surgical training, and to credential surgeons as technically competent. Simulators in their current form have been demonstrated to improve the operating room performance of surgical residents. Development of standardized training curricula remains an urgent and important agenda, particularly for minimal invasive surgery. An innovative and progressive approach, borrowing experiences from the field of aviation, can provide the foundation for the next century of surgical training, ensuring the quality of the product. As the technology develops, the way we practice will continue to evolve, to the benefit of physicians and patients. PMID:16718842

Design and implementation of a PC-based image-guided surgical system.

Science.gov (United States)

Stefansic, James D; Bass, W Andrew; Hartmann, Steven L; Beasley, Ryan A; Sinha, Tuhin K; Cash, David M; Herline, Alan J; Galloway, Robert L

2002-11-01

In interactive, image-guided surgery, current physical space position in the operating room is displayed on various sets of medical images used for surgical navigation. We have developed a PC-based surgical guidance system (ORION) which synchronously displays surgical position on up to four image sets and updates them in real time. There are three essential components which must be developed for this system: (1) accurately tracked instruments; (2) accurate registration techniques to map physical space to image space; and (3) methods to display and update the image sets on a computer monitor. For each of these components, we have developed a set of dynamic link libraries in MS Visual C++ 6.0 supporting various hardware tools and software techniques. Surgical instruments are tracked in physical space using an active optical tracking system. Several of the different registration algorithms were developed with a library of robust math kernel functions, and the accuracy of all registration techniques was thoroughly investigated. Our display was developed using the Win32 API for windows management and tomographic visualization, a frame grabber for live video capture, and OpenGL for visualization of surface renderings. We have begun to use this current implementation of our system for several surgical procedures, including open and minimally invasive liver surgery.

functional outcome and quality of life after surgical management

African Journals Online (AJOL)

Objective: To determine the functional outcome and quality of life of acetabular ... Outcome measures: Modified Merle d'Aubigne scale and “Squat and Smile” test for functional outcome. ..... limited number of implants, few surgical instruments.

Characteristic Elemental Composition of Oil Pigments using Instrumental Neutron Activation Analysis

Energy Technology Data Exchange (ETDEWEB)

Chung, Yong Sam; Kim, Sun Ha; Sun, Gwang Min; Lim, Jong Myung; Moon, Jong Hwa; Kim, Young Jin [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Lim, Sung Jin; Song, Yu Na; Kim, Ken [National Museum of Contemporary Art, Gwacheon (Korea, Republic of)

2009-10-15

The principal aim of this study is to identify the applicability of instrumental neutron activation analysis as a non-destructive examination tool for the quantitative composition analysis associated with authentication, restoration, and conservation of art objects in the field of cultural heritage. Generally, the chemical composition of pigments are associated with the colors such as white, yellow, orange, red, green, blue and black, and it varies with raw materials of pigments. According to the colors of a different pigments, chemical compositions are as follows; for example, white pigments were used for a mixture of Pb(CO{sub 3}){sub 2}, PbSO{sub 4}, PbO, Pb(OH){sub 2}, ZnO, ZnS, TiO{sub 2}, BaSO{sub 4}, CaCO{sub 3}, Al{sub 2}O{sub 3}, As{sub 2}S{sub 3}, etc.; black pigments were series of carbon black, borne ash, MnO+Mn{sub 2}O{sub 3}, etc.; red pigments were Fe{sub 2}O{sub 3}, Pb{sub 3}O{sub 4}, HgS, PbMo{sub 4}, CdS+CdSe, etc.; brown and yellow pigments were PbCrO{sub 4}, ZnCrO{sub 4}, CdS-ZnS, K{sub 3}[Co(NO{sub 2}){sub 6}], Pb(SbO{sub 3}){sub 2}, C{sub 19}H{sub 16}O{sub 11}Mg, SrCrO{sub 4}, etc.; green pigments were Cr{sub 2}O{sub 3}, Cr{sub 2}O(OH){sub 4}, Cu(C{sub 2}H{sub 3}O{sub 2})-2Cu(OH){sub 2}), Cr{sub 2}O{sub 3}-Al{sub 2}O{sub 3}-CoO, etc.; blue pigments were Fe{sub 4}[Fe(CN){sub 6}]{sub 3}, CoO-Al{sub 2}O{sub 3}, Na{sub 8}-{sub 10}Al{sub 6}Si{sub 6}O{sub 24}S{sub 2-4}, etc. This first step is to obtain quantitative data on the concentrations of major, minor and trace elements in oil pigments and to explain pigment sources by statistical treatment as reported in many literatures. The determination of major, minor and micro elements in the subject materials are essential in many fields of basic science and technology as well as commercial and industrial fields. In particular, direct analysis of a sample offers a more effective investigation method in these fields. Instrumental neutron activation analysis (INAA) has an inherent advantage of being a

The effect of music on robot-assisted laparoscopic surgical performance.

Science.gov (United States)

Siu, Ka-Chun; Suh, Irene H; Mukherjee, Mukul; Oleynikov, Dmitry; Stergiou, Nick

2010-12-01

Music is often played in the operating room to increase the surgeon's concentration and to mask noise. It could have a beneficial effect on surgical performance. Ten participants with limited experience with the da Vinci robotic surgical system were recruited to perform two surgical tasks: suture tying and mesh alignment when classical, jazz, hip-hop, and Jamaican music were presented. Kinematics of the instrument tips of the surgical robot and surface electromyography of the subjects were recorded. Results revealed that a significant music effect was found for both tasks with decreased time to task completion (P = .005) and total travel distance (P = .021) as well as reduced muscle activations ( P = .016) and increased median muscle frequency (P = .034). Subjects improved their performance significantly when they listened to either hip-hop or Jamaican music. In conclusion, music with high rhythmicity has a beneficial effect on robotic surgical performance. Musical environment may benefit surgical training and make acquisition of surgical skills more efficient.

PALOMA : An instrument to measure the molecular, elemental and isotopic composition of Mars atmosphere from a landed platform (MSL 09, EXOMARS)

Science.gov (United States)

Chassefière, E.; Paloma Team

2003-04-01

An instrument to analyze the molecular, elemental and isotopic composition of Mars atmosphere from a landed platform is being developed under CNES funding. This instrument, called PALOMA (PAyload for Local Observation of Mars Atmosphere), will be proposed in response to the AO for the instrumentation of the NASA Mars Smart Lander mission, planned to be launched in 2009. It might be part as well of the EXOMARS mission presently studied at ESA in the frame of the Aurora program. Noble gases (He, Ne, Ar, Xr, Xe) and stable isotopes (C, H, O, N) will be analyzed by using a system of gas purification and separation, coupled with a mass spectrometer. The heaviest, radioactive, noble gas (Rn) and its short-lived daughters will be measured using a small additional device (alpha particle detector). Detailed search for trace constituents of astrobiological interest, like CH_4, H_2CO, N_2O, H_2S (abundances, isotopic ratios, time variability) will be done on a regular temporal basis during one Martian year. Isotopic ratios will be measured with an accuracy of about 1 ppm, or better, in order to provide a clear diagnosis of possible life signatures, to allow a detailed comparison of Earth and Mars atmospheric fractionation patterns and, finally, to accurately disentangle escape, climatic, geochemical and hypothesized biological effects. High sensitivity is required for elemental and isotopic compositions of trace gases of interest (a small fraction of ppbv). Such an accurate monitoring of Mars atmosphere volatile composition is expected to provide the necessary reference for future composition studies of minerals, soils, bio-markers, polar cap material, either by in-situ measurement, or from laboratory analyses of returned samples. The PALOMA instrument consists of : a gas purification and separation line, using techniques of chemical and cryogenic trapping, and possibly membrane permeation, a mass spectrometer working in static mode, a turbo-molecular pump that provides the

Consistency of performance of robot-assisted surgical tasks in virtual reality.

Science.gov (United States)

Suh, I H; Siu, K-C; Mukherjee, M; Monk, E; Oleynikov, D; Stergiou, N

2009-01-01

The purpose of this study was to investigate consistency of performance of robot-assisted surgical tasks in a virtual reality environment. Eight subjects performed two surgical tasks, bimanual carrying and needle passing, with both the da Vinci surgical robot and a virtual reality equivalent environment. Nonlinear analysis was utilized to evaluate consistency of performance by calculating the regularity and the amount of divergence in the movement trajectories of the surgical instrument tips. Our results revealed that movement patterns for both training tasks were statistically similar between the two environments. Consistency of performance as measured by nonlinear analysis could be an appropriate methodology to evaluate the complexity of the training tasks between actual and virtual environments and assist in developing better surgical training programs.

Paloma: an instrument to measure the molecular, elemental and isotopic composition of the mars atmosphere from a landed platform (MSL 09, EXOMARS)

Energy Technology Data Exchange (ETDEWEB)

Sabroux, J.Ch

2003-07-01

An instrument to analyze the molecular, elemental and isotopic composition of Mars atmosphere from a landed platform is being developed under CNES funding. This instrument, called PALOMA (Payload for Local Observation of Mars Atmosphere), will be proposed in response to the AO for the instrumentation of the NASA Mars Smart Lander mission, planned to be launched in 2009. It might be part as well of the EXOMARS mission presently studied at ESA in the frame of the Aurora program. Noble gases (He, Ne, Ar, Xr, Xe) and stable isotopes (C, H, O, N) will be analyzed by using a system of gas purification and separation, coupled with a mass spectrometer. The heaviest, radioactive, noble gas (Rn) and its short-lived daughters will be measured using a small additional device (alpha particle detector). Detailed search for trace constituents of astro-biological interest, like CH{sub 4}, H{sub 2}CO, N{sub 2}O, H{sub 2}S (abundances, isotopic ratios, time variability) will be done on a regular temporal basis during one Martian year. Isotopic ratios will be measured with an accuracy of about 1 ppm, or better, in order to provide a clear diagnosis of possible life signatures, to allow a detailed comparison of Earth and Mars atmospheric fractionation patterns and, finally, to accurately disentangle escape, climatic, geochemical and hypothesized biological effects. High sensitivity is required for elemental and isotopic compositions of trace gases of interest. Such an accurate monitoring of Mars atmosphere volatile composition is expected to provide the necessary reference for future composition studies of minerals, soils, bio-markers, polar cap material, either by in-situ measurement, or from laboratory analyses of returned samples. (author)

Paloma: an instrument to measure the molecular, elemental and isotopic composition of the mars atmosphere from a landed platform (MSL 09, EXOMARS)

International Nuclear Information System (INIS)

Sabroux, J.Ch.

2003-01-01

An instrument to analyze the molecular, elemental and isotopic composition of Mars atmosphere from a landed platform is being developed under CNES funding. This instrument, called PALOMA (Payload for Local Observation of Mars Atmosphere), will be proposed in response to the AO for the instrumentation of the NASA Mars Smart Lander mission, planned to be launched in 2009. It might be part as well of the EXOMARS mission presently studied at ESA in the frame of the Aurora program. Noble gases (He, Ne, Ar, Xr, Xe) and stable isotopes (C, H, O, N) will be analyzed by using a system of gas purification and separation, coupled with a mass spectrometer. The heaviest, radioactive, noble gas (Rn) and its short-lived daughters will be measured using a small additional device (alpha particle detector). Detailed search for trace constituents of astro-biological interest, like CH 4 , H 2 CO, N 2 O, H 2 S (abundances, isotopic ratios, time variability) will be done on a regular temporal basis during one Martian year. Isotopic ratios will be measured with an accuracy of about 1 ppm, or better, in order to provide a clear diagnosis of possible life signatures, to allow a detailed comparison of Earth and Mars atmospheric fractionation patterns and, finally, to accurately disentangle escape, climatic, geochemical and hypothesized biological effects. High sensitivity is required for elemental and isotopic compositions of trace gases of interest. Such an accurate monitoring of Mars atmosphere volatile composition is expected to provide the necessary reference for future composition studies of minerals, soils, bio-markers, polar cap material, either by in-situ measurement, or from laboratory analyses of returned samples. (author)

Clinical Performance of Emergency Surgical Officers in Southern ...

African Journals Online (AJOL)

GB

The proportion of cesarean and instrumental deliveries over the total deliveries were 13% and 0.7%, respectively. Explorative laparotomies and appendectomies were the majority of the non-obstetric emergency operations. Interviewed staff in the respective hospitals stated that ESOs' clinical decision making, surgical skill ...

Study of Individual Characteristic Abdominal Wall Thickness Based on Magnetic Anchored Surgical Instruments

Directory of Open Access Journals (Sweden)

Ding-Hui Dong

2015-01-01

Full Text Available Background: Magnetic anchored surgical instruments (MASI, relying on magnetic force, can break through the limitations of the single port approach in dexterity. Individual characteristic abdominal wall thickness (ICAWT deeply influences magnetic force that determines the safety of MASI. The purpose of this study was to research the abdominal wall characteristics in MASI applied environment to find ICAWT, and then construct an artful method to predict ICAWT, resulting in better safety and feasibility for MASI. Methods: For MASI, ICAWT is referred to the thickness of thickest point in the applied environment. We determined ICAWT through finding the thickest point in computed tomography scans. We also investigated the traits of abdominal wall thickness to discover the factor that can be used to predict ICAWT. Results: Abdominal wall at C point in the middle third lumbar vertebra plane (L3 is the thickest during chosen points. Fat layer thickness plays a more important role in abdominal wall thickness than muscle layer thickness. "BMI-ICAWT" curve was obtained based on abdominal wall thickness of C point in L3 plane, and the expression was as follow: f(x = P1 × x 2 + P2 × x + P3, where P1 = 0.03916 (0.01776, 0.06056, P2 = 1.098 (0.03197, 2.164, P3 = −18.52 (−31.64, −5.412, R-square: 0.99. Conclusions: Abdominal wall thickness of C point at L3 could be regarded as ICAWT. BMI could be a reliable predictor of ICAWT. In the light of "BMI-ICAWT" curve, we may conveniently predict ICAWT by BMI, resulting a better safety and feasibility for MASI.

Building a framework for ergonomic research on laparoscopic instrument handles.

Science.gov (United States)

Li, Zheng; Wang, Guohui; Tan, Juan; Sun, Xulong; Lin, Hao; Zhu, Shaihong

2016-06-01

Laparoscopic surgery carries the advantage of minimal invasiveness, but ergonomic design of the instruments used has progressed slowly. Previous studies have demonstrated that the handle of laparoscopic instruments is vital for both surgical performance and surgeon's health. This review provides an overview of the sub-discipline of handle ergonomics, including an evaluation framework, objective and subjective assessment systems, data collection and statistical analyses. Furthermore, a framework for ergonomic research on laparoscopic instrument handles is proposed to standardize work on instrument design. Copyright © 2016 IJS Publishing Group Ltd. Published by Elsevier Ltd. All rights reserved.

Review of emerging surgical robotic technology.

Science.gov (United States)

Peters, Brian S; Armijo, Priscila R; Krause, Crystal; Choudhury, Songita A; Oleynikov, Dmitry

2018-04-01

The use of laparoscopic and robotic procedures has increased in general surgery. Minimally invasive robotic surgery has made tremendous progress in a relatively short period of time, realizing improvements for both the patient and surgeon. This has led to an increase in the use and development of robotic devices and platforms for general surgery. The purpose of this review is to explore current and emerging surgical robotic technologies in a growing and dynamic environment of research and development. This review explores medical and surgical robotic endoscopic surgery and peripheral technologies currently available or in development. The devices discussed here are specific to general surgery, including laparoscopy, colonoscopy, esophagogastroduodenoscopy, and thoracoscopy. Benefits and limitations of each technology were identified and applicable future directions were described. A number of FDA-approved devices and platforms for robotic surgery were reviewed, including the da Vinci Surgical System, Sensei X Robotic Catheter System, FreeHand 1.2, invendoscopy E200 system, Flex® Robotic System, Senhance, ARES, the Single-Port Instrument Delivery Extended Research (SPIDER), and the NeoGuide Colonoscope. Additionally, platforms were reviewed which have not yet obtained FDA approval including MiroSurge, ViaCath System, SPORT™ Surgical System, SurgiBot, Versius Robotic System, Master and Slave Transluminal Endoscopic Robot, Verb Surgical, Miniature In Vivo Robot, and the Einstein Surgical Robot. The use and demand for robotic medical and surgical platforms is increasing and new technologies are continually being developed. New technologies are increasingly implemented to improve on the capabilities of previously established systems. Future studies are needed to further evaluate the strengths and weaknesses of each robotic surgical device and platform in the operating suite.

Intrasurgical Human Retinal Imaging With Manual Instrument Tracking Using a Microscope-Integrated Spectral-Domain Optical Coherence Tomography Device.

Science.gov (United States)

Hahn, Paul; Carrasco-Zevallos, Oscar; Cunefare, David; Migacz, Justin; Farsiu, Sina; Izatt, Joseph A; Toth, Cynthia A

2015-07-01

To characterize the first in-human intraoperative imaging using a custom prototype spectral-domain microscope-integrated optical coherence tomography (MIOCT) device during vitreoretinal surgery with instruments in the eye. Under institutional review board approval for a prospective intraoperative study, MIOCT images were obtained at surgical pauses with instruments held static in the vitreous cavity and then concurrently with surgical maneuvers. Postoperatively, MIOCT images obtained at surgical pauses were compared with images obtained with a high-resolution handheld spectral-domain OCT (HHOCT) system with objective endpoints, including acquisition of images acceptable for analysis and identification of predefined macular morphologic or pathologic features. Human MIOCT images were successfully obtained before incision and during pauses in surgical maneuvers. MIOCT imaging confirmed preoperative diagnoses, such as epiretinal membrane, full-thickness macular hole, and vitreomacular traction and demonstrated successful achievement of surgical goals. MIOCT and HHOCT images obtained at surgical pauses in two cohorts of five patients were comparable with greater than or equal to 80% correlation in 80% of patients. Real-time video-imaging concurrent with surgical manipulations enabled, for the first time using this device, visualization of dynamic instrument-retina interaction with targeted OCT tracking. MIOCT is successful for imaging at surgical pauses and for real-time image guidance with implementation of targeted OCT tracking. Even faster acquisition speeds are currently being developed with incorporation of a swept-source MIOCT engine. Further refinements and investigations will be directed toward continued integration for real-time volumetric imaging of surgical maneuvers. Ongoing development of seamless MIOCT systems will likely transform surgical visualization, approaches, and decision-making.

Single-stage posterior transforaminal lumbar interbody fusion, debridement, limited decompression, 3-column reconstruction, and posterior instrumentation in surgical treatment for single-segment lumbar spinal tuberculosis.

Science.gov (United States)

Zeng, Hao; Wang, Xiyang; Zhang, Penghui; Peng, Wei; Liu, Zheng; Zhang, Yupeng

2015-01-01

The aim of this study is to determine the feasibility and efficacy of surgical management of single-segment lumbar spinal tuberculosis (TB) by using single-stage posterior transforaminal lumbar interbody fusion, debridement, limited decompression, 3-column reconstruction, and posterior instrumentation. Seventeen cases of single-segment lumbar TB were treated with single-stage posterior transforaminal lumbar interbody fusion, debridement, limited decompression, 3-column reconstruction, and posterior instrumentation. The mean follow-up was 36.9 months (range: 24-62 months). The kyphotic angle ranged from 15.2-35.1° preoperatively, with an average measurement of 27.8°. The American Spinal Injury Association (ASIA) score system was used to evaluate the neurological deficits and erythrocyte sedimentation rate (ESR) used to judge the activity of TB. Spinal TB was completely cured in all 17 patients. There was no recurrent TB infection. The postoperative kyphotic angle was 6.6-10.2°, 8.1° in average, and there was no significant loss of the correction at final follow-up. Solid fusion was achieved in all cases. Neurological condition in all patients was improved after surgery. Single-stage posterior transforaminal lumbar interbody fusion, debridement, limited decompression, 3-column reconstruction, and posterior instrumentation can be a feasible and effective method the in treatment of single-segment lumbar spinal TB.

Measuring patient participation in surgical treatment decision-making from healthcare professionals' perspective.

Science.gov (United States)

Heggland, Liv-Helen; Mikkelsen, Aslaug; Øgaard, Torvald; Hausken, Kjell

2014-02-01

To develop, empirical test, and validate an instrument measuring patient participation in surgical treatment decision-making from healthcare professionals' perspective. Since the advent of New Public Management in many Western countries, patient participation in healthcare decision-making has been considered to be a best practice. A common notion is that well-educated and well-informed public want to choose their own treatments and providers and want to ask questions about the quality of their health services. Survey. A self-report-measuring instrument was designed and administered to 620 healthcare professionals. Items were developed, validated and tested by 451 nurses and physicians working in six surgical wards in a University Hospital in Norway. A 16-item scale with the following four dimensions was developed: information dissemination, formulation of options, integration of information and control. Factor analysis procedures and reliability testing were performed. A one-way, between-groups analysis of variance was conducted to compare doctors' and nurses' opinions on four dimensions of patient participation in surgical treatment decision-making. This article shows that patient participation in surgical treatment decision-making can be measured by a 16-item scale and four distinct dimensions. The analysis demonstrated a reasonable level of construct validity and reliability. Nurses and physicians have a positive attitude towards patient participation overall, but the two groups differ in the extent to which they accept the idea of patient participation in treatment decision-making. The instrument can be a tool for managers and healthcare professionals in the implementation of patient participation in clinical practice. Data from the instrument can be useful to identify health services being provided and what areas that could strengthen patient participation. © 2013 Blackwell Publishing Ltd.

Development of an Educational Game to Set Up Surgical Instruments on the Mayo Stand or Back Table: Applied Research in Production Technology.

Science.gov (United States)

Paim, Crislaine Pires Padilha; Goldmeier, Silvia

2017-01-10

Existing research suggests that digital games can be used effectively for educational purposes at any level of training. Perioperative nursing educators can use games to complement curricula, in guidance and staff development programs, to foster team collaboration, and to give support to critical thinking in nursing practice because it is a complex environment. To describe the process of developing an educational game to set up surgical instruments on the Mayo stand or back table as a resource to assist the instructor in surgical instrumentation training for students and nursing health professionals in continued education. The study was characterized by applied research in production technology. It included the phases of analysis and design, development, and evaluation. The objectives of the educational game were developed through Bloom's taxonomy. Parallel to the physical development of the educational game, a proposed model for the use of digital elements in educational game activities was applied to develop the game content. The development of the game called "Playing with Tweezers" was carried out in 3 phases and was evaluated by 15 participants, comprising students and professional experts in various areas of knowledge such as nursing, information technology, and education. An environment was created with an initial screen, menu buttons containing the rules of the game, and virtual tour modes for learning and assessment. The "digital" nursing student needs engagement, stimulation, reality, and entertainment, not just readings. "Playing with Tweezers" is an example of educational gaming as an innovative teaching strategy in nursing that encourages the strategy of involving the use of educational games to support theoretical or practical classroom teaching. Thus, the teacher does not work with only 1 type of teaching methodology, but with a combination of different methodologies. In addition, we cannot forget that skill training in an educational game does not

Cosmetics chemical composition characterization by instrumental neutron activation analysis

Energy Technology Data Exchange (ETDEWEB)

Alves, Ana Paula; Pereira, Gustavo Jose; Amaral, Angela Maria; Ferreira, Andrea Vidal, E-mail: ana_allves2008@hotmail.co [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

2009-07-01

Brazil is in the third position in the world's cosmetics market. It is an expanding and growing market where new products and manufacturing processes are in a constant and steady expansion. Therefore, it is mandatory that the composition of the products is well known in order to guarantee safety and quality of daily used cosmetics. The Brazilian National Health Surveillance Agency (ANVISA) has issued a resolution, RDC No. 48, March 16, 2006, which defines a 'List of Substances which can not be used in personal hygiene products, cosmetics and perfumes'. In this work, samples of locally manufactured and imported cosmetics (lipsticks, eye shadows, etc.) were analyzed using the Instrumental Neutron Activation Analysis technique. The samples were irradiated in the TRIGA IPR-R1 reactor of the Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN), on a 100kW thermal power, with a thermal neutron fluence rate about 8x10{sup 11}ncm{sup -2}s{sup -1}. The analysis has detected the chemical elements Br, Ba, Ga, Na, K, Sc, Fe, Cr, Zn, Sm, W, La, Rb, Cs, Ta, Ge, Co, U, Ti, V, Cl, Al, Mn and Cu. The concentrations of these elements are on a range from 5 to 3000mug.g{sup -1}. Some chemical elements observed in samples (Cl, Br, Cr, U) are included at ANVISA prohibitive list. (author)

Cosmetics chemical composition characterization by instrumental neutron activation analysis

International Nuclear Information System (INIS)

Alves, Ana Paula; Pereira, Gustavo Jose; Amaral, Angela Maria; Ferreira, Andrea Vidal

2009-01-01

Brazil is in the third position in the world's cosmetics market. It is an expanding and growing market where new products and manufacturing processes are in a constant and steady expansion. Therefore, it is mandatory that the composition of the products is well known in order to guarantee safety and quality of daily used cosmetics. The Brazilian National Health Surveillance Agency (ANVISA) has issued a resolution, RDC No. 48, March 16, 2006, which defines a 'List of Substances which can not be used in personal hygiene products, cosmetics and perfumes'. In this work, samples of locally manufactured and imported cosmetics (lipsticks, eye shadows, etc.) were analyzed using the Instrumental Neutron Activation Analysis technique. The samples were irradiated in the TRIGA IPR-R1 reactor of the Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN), on a 100kW thermal power, with a thermal neutron fluence rate about 8x10 11 ncm -2 s -1 . The analysis has detected the chemical elements Br, Ba, Ga, Na, K, Sc, Fe, Cr, Zn, Sm, W, La, Rb, Cs, Ta, Ge, Co, U, Ti, V, Cl, Al, Mn and Cu. The concentrations of these elements are on a range from 5 to 3000μg.g -1 . Some chemical elements observed in samples (Cl, Br, Cr, U) are included at ANVISA prohibitive list. (author)

Augmenting traditional instruments with a motion capture system

DEFF Research Database (Denmark)

Götzen, Amalia De; Vidolin, Alvise; Bernardini, Nicola

2013-01-01

This paper describes some composition works where the real instruments have been augmented through a motion capture system (Phasespace). While playing his instrument in the traditional way, the player is also controlling some other sound effects by moving his hands: the instrument becomes totally...

Current Limitations of Surgical Robotics in Reconstructive Plastic Microsurgery

Directory of Open Access Journals (Sweden)

Youri P. A. Tan

2018-03-01

Full Text Available Surgical robots have the potential to provide surgeons with increased capabilities, such as removing physiologic tremor, scaling motion and increasing manual dexterity. Several surgical specialties have subsequently integrated robotic surgery into common clinical practice. Plastic and reconstructive microsurgical procedures have not yet  benefitted significantly from technical developments observed over the last two decades. Several studies have successfully demonstrated the feasibility of utilising surgical robots in plastic surgery procedures, yet limited work has been done to identify and analyse current barriers that have prevented wide-scale adaptation of surgical robots for microsurgery. Therefore, a systematic review using PubMed, MEDLINE, Embase and Web of Science databases was performed, in order to evaluate current state of surgical robotics within the field of reconstructive microsurgery and their limitations. Despite the theoretical potential of surgical robots, current commercially available robotic systems are suboptimal for plastic or reconstructive microsurgery. Absence of bespoke microsurgical instruments, increases in operating time, and high costs associated with robotic-assisted provide a barrier to using such systems effectively for reconstructive microsurgery. Consequently, surgical robots provide currently little overall advantage over conventional microsurgery. Nevertheless, if current barriers can be addressed and systems are specifically designed for microsurgery, surgical robots may have the potential of meaningful impact on clinical outcomes within  this surgical subspeciality.

Current Limitations of Surgical Robotics in Reconstructive Plastic Microsurgery

Science.gov (United States)

Tan, Youri P. A.; Liverneaux, Philippe; Wong, Jason K. F.

2018-01-01

Surgical robots have the potential to provide surgeons with increased capabilities, such as removing physiologic tremor, scaling motion and increasing manual dexterity. Several surgical specialties have subsequently integrated robotic surgery into common clinical practice. Plastic and reconstructive microsurgical procedures have not yet  benefitted significantly from technical developments observed over the last two decades. Several studies have successfully demonstrated the feasibility of utilising surgical robots in plastic surgery procedures, yet limited work has been done to identify and analyse current barriers that have prevented wide-scale adaptation of surgical robots for microsurgery. Therefore, a systematic review using PubMed, MEDLINE, Embase and Web of Science databases was performed, in order to evaluate current state of surgical robotics within the field of reconstructive microsurgery and their limitations. Despite the theoretical potential of surgical robots, current commercially available robotic systems are suboptimal for plastic or reconstructive microsurgery. Absence of bespoke microsurgical instruments, increases in operating time, and high costs associated with robotic-assisted provide a barrier to using such systems effectively for reconstructive microsurgery. Consequently, surgical robots provide currently little overall advantage over conventional microsurgery. Nevertheless, if current barriers can be addressed and systems are specifically designed for microsurgery, surgical robots may have the potential of meaningful impact on clinical outcomes within  this surgical subspeciality. PMID:29740585

Augmented reality in laparoscopic surgical oncology.

Science.gov (United States)

Nicolau, Stéphane; Soler, Luc; Mutter, Didier; Marescaux, Jacques

2011-09-01

Minimally invasive surgery represents one of the main evolutions of surgical techniques aimed at providing a greater benefit to the patient. However, minimally invasive surgery increases the operative difficulty since the depth perception is usually dramatically reduced, the field of view is limited and the sense of touch is transmitted by an instrument. However, these drawbacks can currently be reduced by computer technology guiding the surgical gesture. Indeed, from a patient's medical image (US, CT or MRI), Augmented Reality (AR) can increase the surgeon's intra-operative vision by providing a virtual transparency of the patient. AR is based on two main processes: the 3D visualization of the anatomical or pathological structures appearing in the medical image, and the registration of this visualization on the real patient. 3D visualization can be performed directly from the medical image without the need for a pre-processing step thanks to volume rendering. But better results are obtained with surface rendering after organ and pathology delineations and 3D modelling. Registration can be performed interactively or automatically. Several interactive systems have been developed and applied to humans, demonstrating the benefit of AR in surgical oncology. It also shows the current limited interactivity due to soft organ movements and interaction between surgeon instruments and organs. If the current automatic AR systems show the feasibility of such system, it is still relying on specific and expensive equipment which is not available in clinical routine. Moreover, they are not robust enough due to the high complexity of developing a real-time registration taking organ deformation and human movement into account. However, the latest results of automatic AR systems are extremely encouraging and show that it will become a standard requirement for future computer-assisted surgical oncology. In this article, we will explain the concept of AR and its principles. Then, we

Patient satisfaction and quality of surgical care in US hospitals.

Science.gov (United States)

Tsai, Thomas C; Orav, E John; Jha, Ashish K

2015-01-01

The relationship between patient satisfaction and surgical quality is unclear for US hospitals. Using national data, we examined if hospitals with high patient satisfaction have lower levels of performance on accepted measures of the quality and efficiency of surgical care. Federal policymakers have made patient satisfaction a core measure for the way hospitals are evaluated and paid through the value-based purchasing program. There is broad concern that performance on patient satisfaction may have little or even a negative correlation with the quality of surgical care, leading to potential trade-offs in efforts to improve patient experience with other surgical quality measures. We used the Hospital Consumer Assessment of Healthcare Providers and Systems survey data from 2010 and 2011 to assess performance on patient experience. We used national Medicare data on 6 common surgical procedures to calculate measures of surgical efficiency and quality: risk-adjusted length of stay, process score, risk-adjusted mortality rate, risk-adjusted readmission rate, and a composite z score across all 4 metrics. Multivariate models adjusting for hospital characteristics were used to assess the independent relationships between patient satisfaction and measures of surgical efficiency and quality. Of the 2953 US hospitals that perform one of these 6 procedures, the median patient satisfaction score was 69.5% (interquartile range, 63%-75.5%). Length of stay was shorter in hospitals with the highest levels of patient satisfaction (7.1 days vs 7.7 days, P patient satisfaction had the higher process of care performance (96.5 vs 95.5, P patient satisfaction also had a higher composite score for quality across all measures (P patient satisfaction provided more efficient care and were associated with higher surgical quality. Our findings suggest there need not be a trade-off between good quality of care for surgical patients and ensuring a positive patient experience.

Analysis of the learning curve for transurethral resection of the prostate. Is there any influence of musical instrument and video game skills on surgical performance?

Science.gov (United States)

Yamaçake, Kleiton Gabriel Ribeiro; Nakano, Elcio Tadashi; Soares, Iva Barbosa; Cordeiro, Paulo; Srougi, Miguel; Antunes, Alberto Azoubel

2015-09-01

To evaluate the learning curve for transurethral resection of the prostate (TURP) among urology residents and study the impact of video game and musical instrument playing abilities on its performance. A prospective study was performed from July 2009 to January 2013 with patients submitted to TURP for benign prostatic hyperplasia. Fourteen residents operated on 324 patients. The following parameters were analyzed: age, prostate-specific antigen levels, prostate weight on ultrasound, pre- and postoperative serum sodium and hemoglobin levels, weight of resected tissue, operation time, speed of resection, and incidence of capsular lesions. Gender, handedness, and prior musical instrument and video game playing experience were recorded using survey responses. The mean resection speed in the first 10 procedures was 0.36 g/min and reached a mean of 0.51 g/min after the 20(th) procedure. The incidence of capsular lesions decreased progressively. The operation time decreased progressively for each subgroup regardless of the difference in the weight of tissue resected. Those experienced in playing video games presented superior resection speed (0.45 g/min) when compared with the novice (0.35 g/min) and intermediate (0.38 g/min) groups (p=0.112). Musical instrument playing abilities did not affect the surgical performance. Speed of resection, weight of resected tissue, and percentage of resected tissue improve significantly and the incidence of capsular lesions reduces after the performance of 10 TURP procedures. Experience in playing video games or musical instruments does not have a significant effect on outcomes.

Development and preliminary validation of a post-fistula repair reintegration instrument among Ugandan women

OpenAIRE

El Ayadi, Alison; Nalubwama, Hadija; Barageine, Justus; Neilands, Torsten B.; Obore, Susan; Byamugisha, Josaphat; Kakaire, Othman; Mwanje, Haruna; Korn, Abner; Lester, Felicia; Miller, Suellen

2017-01-01

Background Obstetric fistula is a debilitating and traumatic birth injury affecting 2?3 million women globally, mostly in sub-Saharan Africa and Asia. Affected women suffer physically, psychologically and socioeconomically. International efforts have increased access to surgical treatment, yet attention to a holistic outcome of post-surgical rehabilitation is nascent. We sought to develop and pilot test a measurement instrument to assess post-surgical family and community reintegration. Metho...

Minimally invasive surgical treatment of valvular heart disease.

Science.gov (United States)

Goldstone, Andrew B; Joseph Woo, Y

2014-01-01

Cardiac surgery is in the midst of a practice revolution. Traditionally, surgery for valvular heart disease consisted of valve replacement via conventional sternotomy using cardiopulmonary bypass. However, over the past 20 years, the increasing popularity of less-invasive procedures, accompanied by advancements in imaging, surgical instrumentation, and robotic technology, has motivated and enabled surgeons to develop and perform complex cardiac surgical procedures through small incisions, often eliminating the need for sternotomy or cardiopulmonary bypass. In addition to the benefits of improved cosmesis, minimally invasive mitral valve surgery was pioneered with the intent of reducing morbidity, postoperative pain, blood loss, hospital length of stay, and time to return to normal activity. This article reviews the current state-of-the-art of minimally invasive approaches to the surgical treatment of valvular heart disease. Copyright © 2014 Elsevier Inc. All rights reserved.

Voice tuning with new instruments for type II thyroplasty in the treatment of adductor spasmodic dysphonia.

Science.gov (United States)

Sanuki, Tetsuji; Yumoto, Eiji; Toya, Yutaka; Kumai, Yoshihiko

2016-10-01

Adductor spasmodic dysphonia is a rare voice disorder characterized by strained and strangled voice quality with intermittent phonatory breaks and adductory vocal fold spasms. Type II thyroplasty differs from previous treatments in that this surgery does not involve any surgical intervention into the laryngeal muscle, nerve or vocal folds. Type II thyroplasty intervenes in the thyroid cartilage, which is unrelated to the lesion. This procedure, conducted with the aim of achieving lateralization of the vocal folds, requires utmost surgical caution due to the extreme delicacy of the surgical site, critically sensitive adjustment, and difficult procedures to maintain the incised cartilages at a correct position. During surgery, the correct separation of the incised cartilage edges with voice monitoring is the most important factor determining surgical success and patient satisfaction. We designed new surgical instruments: a thyroid cartilage elevator for undermining the thyroid cartilage, and spacer devices to gauge width while performing voice monitoring. These devices were designed to prevent surgical complications, and to aid in selecting the optimal size of titanium bridges while temporally maintaining a separation during voice monitoring. We designed new surgical instruments, including a thyroid cartilage elevator and spacer devices. Precise surgical procedures and performing voice tuning during surgery with the optimal separation width of the thyroid cartilage are key points for surgical success. We introduce the technique of voice tuning using these surgical tools in order to achieve a better outcome with minimal surgical complications. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Elementary composition of the siderurgy slag by instrumental neutron activation analysis; Composicao elementar em escoria de siderurgia por analise por ativacao neutronica instrumental

Energy Technology Data Exchange (ETDEWEB)

Oliveira, Helder de; Piau, Wilson Caixeta; Mortatti, Jefferson [Centro de Energia Nuclear na Agricultura (CENA), Piracicaba, SP (Brazil); Sarries, Gabriel Adrian [Sao Paulo Univ., Piracicaba, SP (Brazil). Escola Superior de Agricultura Luiz de Queiroz

2000-07-01

The slag has been applied to the ground to neutralize its acidity, in similar way to the calcareous rock, contributing in the agriculture as corrective of the acidity alone it and source of nutrients for the plants. However, the alternative for the agricultural slag exploitation is related to metal texts heavy gifts in the slag. The objective of the present work was to survey of the chemical composition of trashes generated in blast high-oven, steel, oven of pan and fertilizers that had used in its manufacture slag of siderurgy for the technique of instrumental neutron activation analysis. The results had evidenced the existence of high variations in the elements Ce, Cr, In, K, Sb and Zn in the distinct analyzed samples. (author)

Surface Modification of AISI 440B Stainless Steel and its Influence on Surgical Drill Bits Performance

Directory of Open Access Journals (Sweden)

Łępicka M.

2016-09-01

Full Text Available The development of modern invasive surgery is highly dependent on the performance of surgical instruments, understood as long-term efficiency arising from high resistance to wear and corrosion. In order to maintain sufficient reliability, surgical cutting instruments are often made of martensitic stainless steels. Nevertheless, the use of ferrous alloys in medical applications is still a concern due to their questionable corrosion and wear resistance. To extend their biocompatibility, improve stability in variable environmental conditions, improve ease of handling, and maximize their performance, diffusion layers and coatings are applied to the surface. The aim of this work was to evaluate the effect of TiN and diamond-like carbon (DLC surface modification on the performance of surgical drill bits, that is, wear and corrosion resistance, measured in model and field tests. Based on the findings presented, DLC layers can be recommended as anti-wear and anti-corrosion coatings for surgical drill bits.

Mentoring console improves collaboration and teaching in surgical robotics.

Science.gov (United States)

Hanly, Eric J; Miller, Brian E; Kumar, Rajesh; Hasser, Christopher J; Coste-Maniere, Eve; Talamini, Mark A; Aurora, Alexander A; Schenkman, Noah S; Marohn, Michael R

2006-10-01

One of the most significant limitations of surgical robots has been their inability to allow multiple surgeons and surgeons-in-training to engage in collaborative control of robotic surgical instruments. We report the initial experience with a novel two-headed da Vinci surgical robot that has two collaborative modes: the "swap" mode allows two surgeons to simultaneously operate and actively swap control of the robot's four arms, and the "nudge" mode allows them to share control of two of the robot's arms. The utility of the mentoring console operating in its two collaborative modes was evaluated through a combination of dry laboratory exercises and animal laboratory surgery. The results from surgeon-resident collaborative performance of complex three-handed surgical tasks were compared to results from single-surgeon and single-resident performance. Statistical significance was determined using Student's t-test. Collaborative surgeon-resident swap control reduced the time to completion of complex three-handed surgical tasks by 25% compared to single-surgeon operation of a four-armed da Vinci (P nudge mode was particularly useful for guiding a resident's hands during crucially precise steps of an operation (such as proper placement of stitches). The da Vinci mentoring console greatly facilitates surgeon collaboration during robotic surgery and improves the performance of complex surgical tasks. The mentoring console has the potential to improve resident participation in surgical robotics cases, enhance resident education in surgical training programs engaged in surgical robotics, and improve patient safety during robotic surgery.

FY1995 development of a endoscopic surgical system utilizing multi-modal functional images; 1995 nendo tashu kino gazo wo mochiiru teishinshu naishikyo shujutsu system no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-05-01

The purpose of this study is to develop an endoscope system for neurosurgery that can provide not only conventional endoscopic images but also ultraviolet-visible spectra, fluorescence spectra, near infrared spectra, and ultra-soundimages of tissue aiming for real-time identification of pathological tissue. The system also incorporates surgical manipulator and devices such as micro forceps and laser surgical instruments for endoscopic image guided surgery. Surgical Manipulator should be a high performance and easy to operate surgical instrument as well as conventional surgical tools such as scissors and knife. Since living tissue deforms during surgical operation, pre-operative three dimensional information for registration of pathological tissue should be modified based on information obtained during surgery. Thus surgical manipulator should be operated under guidance of surgeon's observation. Consequently, surgical manipulator should have various types of imaging and measurement devices such as an endoscope and an ultrasound imaging probe at its end effectors. Based on this concept, a prototype of a new multi channel surgical manipulator system CM cube (CM3, Computer aided Micro Multichannel Manipulator) that has various types of imaging and measurement devices such as ultra-violet-visible camera for spectroscopic measurement, ultra-sound imaging probe, three dimensional endoscope, together with micro surgical instruments and laser surgical systems has been developed. Its performance was evaluated through in vitro/in vivo experiments and clinical application. (NEDO)

Quantitative analysis of residual protein contamination of podiatry instruments reprocessed through local and central decontamination units.

Science.gov (United States)

Smith, Gordon Wg; Goldie, Frank; Long, Steven; Lappin, David F; Ramage, Gordon; Smith, Andrew J

2011-01-10

The cleaning stage of the instrument decontamination process has come under increased scrutiny due to the increasing complexity of surgical instruments and the adverse affects of residual protein contamination on surgical instruments. Instruments used in the podiatry field have a complex surface topography and are exposed to a wide range of biological contamination. Currently, podiatry instruments are reprocessed locally within surgeries while national strategies are favouring a move toward reprocessing in central facilities. The aim of this study was to determine the efficacy of local and central reprocessing on podiatry instruments by measuring residual protein contamination of instruments reprocessed by both methods. The residual protein of 189 instruments reprocessed centrally and 189 instruments reprocessed locally was determined using a fluorescent assay based on the reaction of proteins with o-phthaldialdehyde/sodium 2-mercaptoethanesulfonate. Residual protein was detected on 72% (n = 136) of instruments reprocessed centrally and 90% (n = 170) of instruments reprocessed locally. Significantly less protein (p podiatry instruments when protein contamination is considered, though no significant difference was found in residual protein between local decontamination unit and central decontamination unit processes for Blacks files. Further research is needed to undertake qualitative identification of protein contamination to identify any cross contamination risks and a standard for acceptable residual protein contamination applicable to different instruments and specialities should be considered as a matter of urgency.

Adjacent segment disease in degenerative pathologies with posterior instrumentation

Directory of Open Access Journals (Sweden)

Ana Guadalupe Ramírez Olvera

2015-03-01

Full Text Available OBJECTIVE: To establish the real incidence of adjacent segment disease after fusion, and to identify the levels and predisposing factors for the pathology, as well as the functional results. METHODS: a retrospective case series study with level of evidence IIB, in a sample of 179 patients diagnosed with stenosis of the lumbar spine, spondylolisthesis and degenerative scoliosis, submitted to surgery in the period 2005 to December 2013, with posterior instrumentation and posterolateral fusion, with follow-up from 2007 until May 2014, in which the symptomology and radiographic findings were evaluated, to establish the diagnosis and treatment. RESULTS: the study included 179 patients diagnosed with stenosis of the lumbar spine (n=116, isthmic and degenerative spondylolisthesis (n=50 and degenerative scoliosis (n=13; during the study, 20 cases of adjacent level segment were identified, 80% of which were treated surgically with extension of the instrumentation, while 20% were treated conservatively with NSAIDs and therapeutic blocks. CONCLUSION: An incidence of 11% was found, with an average of 3.25 years in diagnosis and treatment, a prevalence of females and diagnosis of stenosis of the lumbar canal on posterior instrumentation, a predominance of levels L4-L5; 80% were treated with extension of the instrumentation. The complications were persistent radiculopathy, infection of the surgical wound, and one death due to causes not related to the lumbar pathology.

Rehabilitation with 4 zygomatic implants with a new surgical protocol using ultrasonic technique.

Science.gov (United States)

Mozzati, Marco; Mortellaro, Carmen; Arata, Valentina; Gallesio, Giorgia; Previgliano, Valter

2015-05-01

When the residual bone crest cannot allow the placement of standard implants, the treatment for complete arch rehabilitation of severely atrophic maxillae can be performed with 4 zygomatic implants (ZIs) and immediate function with predictable results in terms of aesthetics, function, and comfort for the patient. However, even if ZIs' rehabilitations showed a good success rate, this surgery is difficult and need a skillful operator. Complications in this kind of rehabilitation are not uncommon; the main difficulties can be related to the reduced surgical visibility and instrument control in a critical anatomic area. All the surgical protocols described in the literature used drilling techniques. Furthermore, the use of ultrasonic instruments in implant surgery compared with drilling instruments have shown advantages in many aspects of surgical procedures, tissues management, enhancement of control, surgical visualization, and healing. The aim of this study was to report on the preliminary experience using ultrasound technique for ZIs surgery in terms of safety and technical improvement. Ten consecutive patients with severely atrophic maxilla have been treated with 4 ZIs and immediate complete arch acrylic resin provisional prostheses. The patients were followed up from 30 to 32 months evaluating implant success, prosthetic success, and patient satisfaction with a questionnaire. No implants were lost during the study period, with a 100% implant and prosthetic success rate. Within the limitations of this preliminary study, these data indicate that ultrasonic implant site preparation for ZIs can be a good alternative to the drilling technique and an improvement for the surgeon.

A Categorical Instrument for Scoring Second Language Writing Skills.

Science.gov (United States)

Brown, James Dean; Bailey, Kathleen M.

1984-01-01

Discusses a study of the reliability of a categorical instrument for evaluating compositions written by upper intermediate university English as a second language students. The instrument tests organization, logical development of ideas, grammar, mechanics, and style. Results indicate that the scoring instrument is moderately reliable. (SED)

Manual Control for Medical Instruments in Minimally Invasive Surgery

NARCIS (Netherlands)

Fan, C.

2014-01-01

With the introduction of new technologies, surgical procedures have been varying from free access in open surgery towards limited access in minimal invasive surgery. During such procedures, surgeons have to manoeuver the instruments from outside the patient while looking at the monitor. Long and

Systematic review and meta-analysis of surgical outcomes in Marfan patients undergoing aortic root surgery by composite-valve graft or valve sparing root replacement.

Science.gov (United States)

Flynn, Campbell D; Tian, David H; Wilson-Smith, Ashley; David, Tirone; Matalanis, George; Misfeld, Martin; Mastrobuoni, Stefano; El Khoury, Gebrine; Yan, Tristan D

2017-11-01

A major, life-limiting feature of Marfan syndrome (MFS) is the presence of aneurysmal disease. Cardiovascular intervention has dramatically improved the life expectancy of Marfan patients. Traditionally, the management of aortic root disease has been undertaken with composite-valve graft replacing the aortic valve and proximal aorta; more recently, valve sparing procedures have been developed to avoid the need for anticoagulation. This meta-analysis assesses the important surgical outcomes of the two surgical techniques. A systematic review and meta-analysis of 23 studies reporting the outcomes of aortic root surgery in Marfan patients with data extracted for outcomes of early and late mortality, thromboembolic events, late bleeding complications and surgical reintervention rates. The outcomes of 2,976 Marfan patients undergoing aortic root surgery were analysed, 1,624 patients were treated with composite valve graft (CVG) and 1,352 patients were treated with valve sparing root replacement (VSRR). When compared against CVG, VSRR was associated with reduced risk of thromboembolism (OR =0.32; 95% CI, 0.16-0.62, P=0.0008), late hemorrhagic complications (OR =0.18; 95% CI, 0.07-0.45; P=0.0003) and endocarditis (OR =0.27; 95% CI, 0.10-0.68; P=0.006). Importantly there was no significant difference in reintervention rates between VSRR and CVG (OR =0.89; 95% CI, 0.35-2.24; P=0.80). There is an increasing body of evidence that VSRR can be reliably performed in Marfan patients, resulting in a durable repair with no increased risk of re-operation compared to CVG, thus avoiding the need for systemic anticoagulation in selected patients.

Multimodality instrument for tissue characterization

Science.gov (United States)

Mah, Robert W. (Inventor); Andrews, Russell J. (Inventor)

2004-01-01

A system with multimodality instrument for tissue identification includes a computer-controlled motor driven heuristic probe with a multisensory tip. For neurosurgical applications, the instrument is mounted on a stereotactic frame for the probe to penetrate the brain in a precisely controlled fashion. The resistance of the brain tissue being penetrated is continually monitored by a miniaturized strain gauge attached to the probe tip. Other modality sensors may be mounted near the probe tip to provide real-time tissue characterizations and the ability to detect the proximity of blood vessels, thus eliminating errors normally associated with registration of pre-operative scans, tissue swelling, elastic tissue deformation, human judgement, etc., and rendering surgical procedures safer, more accurate, and efficient. A neural network program adaptively learns the information on resistance and other characteristic features of normal brain tissue during the surgery and provides near real-time modeling. A fuzzy logic interface to the neural network program incorporates expert medical knowledge in the learning process. Identification of abnormal brain tissue is determined by the detection of change and comparison with previously learned models of abnormal brain tissues. The operation of the instrument is controlled through a user friendly graphical interface. Patient data is presented in a 3D stereographics display. Acoustic feedback of selected information may optionally be provided. Upon detection of the close proximity to blood vessels or abnormal brain tissue, the computer-controlled motor immediately stops probe penetration. The use of this system will make surgical procedures safer, more accurate, and more efficient. Other applications of this system include the detection, prognosis and treatment of breast cancer, prostate cancer, spinal diseases, and use in general exploratory surgery.

Modelling and evaluation of surgical performance using hidden Markov models.

Science.gov (United States)

Megali, Giuseppe; Sinigaglia, Stefano; Tonet, Oliver; Dario, Paolo

2006-10-01

Minimally invasive surgery has become very widespread in the last ten years. Since surgeons experience difficulties in learning and mastering minimally invasive techniques, the development of training methods is of great importance. While the introduction of virtual reality-based simulators has introduced a new paradigm in surgical training, skill evaluation methods are far from being objective. This paper proposes a method for defining a model of surgical expertise and an objective metric to evaluate performance in laparoscopic surgery. Our approach is based on the processing of kinematic data describing movements of surgical instruments. We use hidden Markov model theory to define an expert model that describes expert surgical gesture. The model is trained on kinematic data related to exercises performed on a surgical simulator by experienced surgeons. Subsequently, we use this expert model as a reference model in the definition of an objective metric to evaluate performance of surgeons with different abilities. Preliminary results show that, using different topologies for the expert model, the method can be efficiently used both for the discrimination between experienced and novice surgeons, and for the quantitative assessment of surgical ability.

Clinical, laboratory and instrumental methods of pre-surgical diagnosis of the parathyroid glands cancer

Directory of Open Access Journals (Sweden)

Natalia G. Mokrysheva

2017-12-01

Full Text Available Backgraund. When defining symptomatic primary hyperparathyroidism (PHPT, differential diagnosis between a benign and malignant neoplasm of parathyroid glands (PG may be challenging. The diagnosis of carcinoma or a benign tumor determines the extent of the surgical intervention and further observation tactics. Aims. The purpose of the study is to determine the clinical and laboratory and instrumental predictors of PG cancer. Materials and methods. A retrospective study included 385 patients with PHPT (273 with adenomas of the PG, 66 with hyperplasia, and 19 patients with cancer of the PG, who had been examined and operated from 2000 to 2014. The primary goal of the study was to define the level of ionized calcium (Ca++, parathyroid hormone (PTH, and the volume of the tumor PG specific for cancer of the PG. The level of parathyroid hormone (PTH was determined by electrochemoluminescent method on the Roche analyzer Cobas 6000; ionized calcium (Ca++ ion-selective method. The size of the PG was determined by the ellipse formula: V(cm3 = (A × B × C × 0.49 by ultrasound investigation using the Valuson E8 device from General Electric. Results. The group of patients with PG carcinoma showed the increased level of Ca++ of more than 1.60 mmol/l (p = 0.004 and increased level of PTH of more than 600 pg/ml (p = 0.03. The size of tumors of more than 6 cm3 is more typical to malignant neoplasm compared to the adenoma of the PG (p = 0.01. Conclusions. The group of patients with PHPT that are at risk of having PG carcinoma include individuals that have a combination of the following indicators: PTH levels of more than 600 pg/ml, an increase in ionized calcium of more than 1.60 mmol/l, the tumor size of more than 6 cm3.

Evaluating the Impact of Radio Frequency Identification Retained Surgical Instruments Tracking on Patient Safety: Literature Review.

Science.gov (United States)

Schnock, Kumiko O; Biggs, Bonnie; Fladger, Anne; Bates, David W; Rozenblum, Ronen

2017-02-22

Retained surgical instruments (RSI) are one of the most serious preventable complications in operating room settings, potentially leading to profound adverse effects for patients, as well as costly legal and financial consequences for hospitals. Safety measures to eliminate RSIs have been widely adopted in the United States and abroad, but despite widespread efforts, medical errors with RSI have not been eliminated. Through a systematic review of recent studies, we aimed to identify the impact of radio frequency identification (RFID) technology on reducing RSI errors and improving patient safety. A literature search on the effects of RFID technology on RSI error reduction was conducted in PubMed and CINAHL (2000-2016). Relevant articles were selected and reviewed by 4 researchers. After the literature search, 385 articles were identified and the full texts of the 88 articles were assessed for eligibility. Of these, 5 articles were included to evaluate the benefits and drawbacks of using RFID for preventing RSI-related errors. The use of RFID resulted in rapid detection of RSI through body tissue with high accuracy rates, reducing risk of counting errors and improving workflow. Based on the existing literature, RFID technology seems to have the potential to substantially improve patient safety by reducing RSI errors, although the body of evidence is currently limited. Better designed research studies are needed to get a clear understanding of this domain and to find new opportunities to use this technology and improve patient safety.

Quantitative analysis of residual protein contamination of podiatry instruments reprocessed through local and central decontamination units

Directory of Open Access Journals (Sweden)

Ramage Gordon

2011-01-01

Full Text Available Abstract Background The cleaning stage of the instrument decontamination process has come under increased scrutiny due to the increasing complexity of surgical instruments and the adverse affects of residual protein contamination on surgical instruments. Instruments used in the podiatry field have a complex surface topography and are exposed to a wide range of biological contamination. Currently, podiatry instruments are reprocessed locally within surgeries while national strategies are favouring a move toward reprocessing in central facilities. The aim of this study was to determine the efficacy of local and central reprocessing on podiatry instruments by measuring residual protein contamination of instruments reprocessed by both methods. Methods The residual protein of 189 instruments reprocessed centrally and 189 instruments reprocessed locally was determined using a fluorescent assay based on the reaction of proteins with o-phthaldialdehyde/sodium 2-mercaptoethanesulfonate. Results Residual protein was detected on 72% (n = 136 of instruments reprocessed centrally and 90% (n = 170 of instruments reprocessed locally. Significantly less protein (p Conclusions Overall, the results show the superiority of central reprocessing for complex podiatry instruments when protein contamination is considered, though no significant difference was found in residual protein between local decontamination unit and central decontamination unit processes for Blacks files. Further research is needed to undertake qualitative identification of protein contamination to identify any cross contamination risks and a standard for acceptable residual protein contamination applicable to different instruments and specialities should be considered as a matter of urgency.

Surgical Treatment of Tattoo Complications.

Science.gov (United States)

Sepehri, Mitra; Jørgensen, Bo

2017-01-01

With a continuing increase in the number of tattoos performed worldwide, the need to treat tattoo complications is growing. Earlier treatments of chronic inflammatory tattoo reactions were dominated by a medical approach, or with no active intervention. In this chapter, we will address modern surgical approaches applied to situations when medical treatment is inefficient and lasers are not applicable. Dermatome shaving is positioned as first-line treatment of allergic tattoo reactions and also indicated in a number of other tattoo reactions, supplemented with excision in selected cases. The methods allow fundamental treatment with removal of the culprit pigment from the dermis. The different instruments, surgical methods, and treatment schedules are reviewed, and a guide to surgeons is presented. Postoperative treatments and the long-term outcomes are described in detail. An algorithm on specialist treatment and follow-up of tattoo reactions, which can be practiced in other countries, is presented. © 2017 S. Karger AG, Basel.

Comparison of different sets of instruments for laparoendoscopic single-site surgery in a surgical simulator with novices.

Science.gov (United States)

Wang, Dong; Shi, Long-Qing; Wang, Jing-Min; Jiang, Xiao-Hua; Ji, Zhen-Ling

2016-04-01

Given the parallel entry of working instruments through a single incision in laparoendoscopic single-site surgery, loss of triangulation in the abdominal cavity and counteracting movements of the instruments are inevitable obstacles. Some specially designed devices have emerged to ameliorate these challenges. Twenty-four novice participants were randomized into four groups using assigned instruments, conventional straight instruments, single-curved instruments, double-curved instruments and articulating instruments, respectively, to perform two basic tasks (peg transferring and pattern cutting) 14 times in a modified simulator. A test of the tasks and a resection of the intestine segment of a rat were performed. The task scores and evaluation of intraoperative skills during the resection of the intestine segment were recorded. The instrument of modified National Aeronautics and Space Administration Task Load Index (NASA-TLX) was completed. The task scores of the groups using single-curved instruments and articulating instruments were better than the other two groups on the simulator tasks, consistent with the evaluation of intraoperative skills during the resection of intestine segment. As the proficiency with the instruments increased, the task scores improved, as demonstrated by the learning curve. The workload measured by the modified NASA-TLX tool demonstrated that the groups using articulating instruments and double-curved instruments had a heavier workload in most of the categories compared with the other two groups. Single-curved and articulating instruments are more effective than conventional straight and double-curved devices, and are favourable in laparoendoscopic single-site surgery for novice learners. © 2013 Royal Australasian College of Surgeons.

Prior video game exposure does not enhance robotic surgical performance.

Science.gov (United States)

Harper, Jonathan D; Kaiser, Stefan; Ebrahimi, Kamyar; Lamberton, Gregory R; Hadley, H Roger; Ruckle, Herbert C; Baldwin, D Duane

2007-10-01

Prior research has demonstrated that counterintuitive laparoscopic surgical skills are enhanced by experience with video games. A similar relation with robotic surgical skills has not been tested. The purpose of this study was to determine whether prior video-game experience enhances the acquisition of robotic surgical skills. A series of 242 preclinical medical students completed a self-reported video-game questionnaire detailing the frequency, duration, and peak playing time. The 10 students with the highest and lowest video-game exposure completed a follow-up questionnaire further quantifying video game, sports, musical instrument, and craft and hobby exposure. Each subject viewed a training video demonstrating the use of the da Vinci surgical robot in tying knots, followed by 3 minutes of proctored practice time. Subjects then tied knots for 5 minutes while an independent blinded observer recorded the number of knots tied, missed knots, frayed sutures, broken sutures, and mechanical errors. The mean playing time for the 10 game players was 15,136 total hours (range 5,840-30,000 hours). Video-game players tied fewer knots than nonplayers (5.8 v 9.0; P = 0.04). Subjects who had played sports for at least 4 years had fewer mechanical errors (P = 0.04), broke fewer sutures (P = 0.01), and committed fewer total errors (P = 0.01). Similarly, those playing musical instruments longer than 5 years missed fewer knots (P = 0.05). In the extremes of video-game experience tested in this study, game playing was inversely correlated with the ability to learn robotic suturing. This study suggests that advanced surgical skills such as robotic suturing may be learned more quickly by athletes and musicians. Prior extensive video-game exposure had a negative impact on robotic performance.

Real time noninvasive assessment of external trunk geometry during surgical correction of adolescent idiopathic scoliosis

Directory of Open Access Journals (Sweden)

Mac-Thiong Jean-Marc

2009-02-01

Full Text Available Abstract Background The correction of trunk deformity is crucial in scoliosis surgery, especially for the patient's self-image. However, direct visualization of external scoliotic trunk deformity during surgical correction is difficult due to the covering draping sheets. Methods An optoelectronic camera system with 10 passive markers is used to track the trunk geometry of 5 scoliotic patients during corrective surgery. The position of 10 anatomical landmarks and 5 trunk indices computed from the position of the passive markers are compared during and after instrumentation of the spine. Results Internal validation of the accuracy of tracking was evaluated at 0.41 +/- 0.05 mm RMS. Intra operative tracking during surgical maneuvers shows improvement of the shoulder balance during and after correction of the spine. Improvement of the overall patient balance is observed. At last, a minor increase of the spinal length can be noticed. Conclusion Tracking of the external geometry of the trunk during surgical correction is useful to monitor changes occurring under the sterile draping sheets. Moreover, this technique can used be used to reach the optimal configuration on the operating frame before proceeding to surgery. The current tracking technique was able to detect significant changes in trunk geometry caused by posterior instrumentation of the spine despite significant correction of the spinal curvature. It could therefore become relevant for computer-assisted guidance of surgical maneuvers when performing posterior instrumentation of the scoliotic spine, provide important insights during positioning of patients.

Comparison of impact of four surgical methods on surgical outcomes in endoscopic dacryocystorhinostomy.

Science.gov (United States)

Roh, Hyun Cheol; Baek, Sehyun; Lee, Hwa; Chang, Minwook

2016-06-01

To evaluate differences in the surgical outcomes of endoscopic dacryocystorhinostomy (DCR) according to four different surgical methods. This retrospective study included 222 patients who underwent endoscopic DCR from 2011 to 2013. All patients were assigned to one of four groups according to instruments for incision of nasal mucosa and the formation of mucosal flap: group 1, a sickle knife with mucosal flap; group 2, a sickle knife without mucosal flap; group 3, electrocautery with mucosal flap; and group 4, electrocautery without mucosal flap. The follow up period was at least 6 months. There were 33 eyes in group 1, 44 eyes in group 2, 49 eyes in group 3, and 97 eyes in group 4. There were no significant differences in success rate between groups (P = 0.878). Wound healing time was significantly different between groups (P knife may be more helpful and effective for shortening wound healing time rather than making mucosal flaps in endoscopic DCR. Copyright © 2016 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Multi-Institutional Development of a Mastoidectomy Performance Evaluation Instrument.

Science.gov (United States)

Kerwin, Thomas; Hittle, Brad; Stredney, Don; De Boeck, Paul; Wiet, Gregory

A method for rating surgical performance of a mastoidectomy procedure that is shown to apply universally across teaching institutions has not yet been devised. This work describes the development of a rating instrument created from a multi-institutional consortium. Using a participatory design and a modified Delphi approach, a multi-institutional group of expert otologists constructed a 15-element task-based checklist for evaluating mastoidectomy performance. This instrument was further refined into a 14-element checklist focusing on the concept of safety after using it to rate a large and varied population of performances. Twelve otolaryngological surgical training programs in the United States. A total of 14 surgeons from 12 different institutions took part in the construction of the instrument. By using 14 experts from 12 different institutions and a literature review, individual metrics were identified, rated as to the level of importance and operationally defined to create a rating scale for mastoidectomy performance. Initial use of the rating scale showed modest rater agreement. The operational definitions of individual metrics were modified to emphasize "safe" as opposed to "proper" technique. A second rating instrument was developed based on this feedback. Using a consensus-building approach with multiple rounds of communication between experts is a feasible way to construct a rating instrument for mastoidectomy. Expert opinion alone using a Delphi method provides face and content validity evidence, however, this is not sufficient to develop a universally acceptable rating instrument. A continued process of development and experimentation to demonstrate evidence for reliability and validity making use of a large population of raters and performances is necessary to achieve universal acceptance. Copyright © 2017 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Modeling and evaluation of hand-eye coordination of surgical robotic system on task performance.

Science.gov (United States)

Gao, Yuanqian; Wang, Shuxin; Li, Jianmin; Li, Aimin; Liu, Hongbin; Xing, Yuan

2017-12-01

Robotic-assisted minimally invasive surgery changes the direct hand and eye coordination in traditional surgery to indirect instrument and camera coordination, which affects the ergonomics, operation performance, and safety. A camera, two instruments, and a target, as the descriptors, are used to construct the workspace correspondence and geometrical relationships in a surgical operation. A parametric model with a set of parameters is proposed to describe the hand-eye coordination of the surgical robot. From the results, optimal values and acceptable ranges of these parameters are identified from two tasks. A 90° viewing angle had the longest completion time; 60° instrument elevation angle and 0° deflection angle had better performance; there is no significant difference among manipulation angles and observing distances on task performance. This hand-eye coordination model provides evidence for robotic design, surgeon training, and robotic initialization to achieve dexterous and safe manipulation in surgery. Copyright © 2017 John Wiley & Sons, Ltd.

Post-operative serious adverse events in a mixed surgical population

DEFF Research Database (Denmark)

Hansen, M S; Petersen, E E; Dahl, J B

2016-01-01

BACKGROUND: The number of surgical procedures is increasing, and knowledge of surgical risk factors, post-operative mortality and serious adverse events (SAE) is essential. The aim with our study was to determine the risk of a composite outcome of post-operative: death; myocardial infarction...... or gynaecological surgery was conducted retrieving data from The Danish Civil Registration System and the National Patient Register. Total observation time was from January 1, 2012 to June 6, 2013. RESULTS: A total7449 adult patients were included in the final analysis. The risk of the composite outcome during...... of 8.3% (7.8-9.0). The results are applicable in estimations of adequate sample sizes in future clinical trials investigating effects of interventions on SAEs....

Instrumentation requirements for the ESF thermomechanical experiments

International Nuclear Information System (INIS)

Pott, J.; Brechtel, C.E.

1992-01-01

In situ thermomechanical experiments are planned as part of the Yucca Mountain Site Characterization Project that require instruments to measure stress and displacement at temperatures that exceed the typical specifications of existing geotechnical instruments. A high degree of instrument reliability will also be required to satisfy the objectives of the experiments, therefore a study was undertaken to identify areas where improvement in instrument performance was required. A preliminary list of instruments required for the experiments was developed, based on existing test planning and analysis. Projected temperature requirements were compared to specifications of existing instruments to identify instrumentation development needs. Different instrument technologies, not currently employed in geotechnical instrumentation, were reviewed to identify potential improvements of existing designs for the high temperature environment. Technologies with strong potentials to improve instrument performance with relatively high reliability include graphite fiber composite materials, fiber optics, and video imagery

Virtual reality in surgical education.

Science.gov (United States)

Ota, D; Loftin, B; Saito, T; Lea, R; Keller, J

1995-03-01

Virtual reality (VR) is an emerging technology that can teach surgeons new procedures and can determine their level of competence before they operate on patients. Also VR allows the trainee to return to the same procedure or task several times later as a refresher course. Laparoscopic surgery is a new operative technique which requires the surgeon to observe the operation on a video-monitor and requires the acquisition of new skills. VR simulation could duplicate the operative field and thereby enhance training and reduce the need for expensive animal training models. Our preliminary experience has shown that we have the technology to model tissues and laparoscopic instruments and to develop in real time a VR learning environment for surgeons. Another basic need is to measure competence. Surgical training is an apprenticeship requiring close supervision and 5-7 years of training. Technical competence is judged by the mentor and has always been subjective. If VR surgical simulators are to play an important role in the future, quantitative measurement of competence would have to be part of the system. Because surgical competence is "vague" and is characterized by such terms as "too long, too short" or "too close, too far," it is possible that the principles of fuzzy logic could be used to measure competence in a VR surgical simulator. Because a surgical procedure consists of a series of tasks and each task is a series of steps, we will plan to create two important tasks in a VR simulator and validate their use. These tasks consist of laparoscopic knot tying and laparoscopic suturing. Our hypothesis is that VR in combination with fuzzy logic can educate surgeons and determine when they are competent to perform these procedures on patients.

Trends in the Surgical Correction of Gynecomastia.

Science.gov (United States)

Brown, Rodger H; Chang, Daniel K; Siy, Richard; Friedman, Jeffrey

2015-05-01

Gynecomastia refers to the enlargement of the male breast due to a proliferation of ductal, stromal, and/or fatty tissue. Although it is a common condition affecting up to 65% of men, not all cases require surgical intervention. Contemporary surgical techniques in the treatment of gynecomastia have become increasingly less invasive with the advent of liposuction and its variants, including power-assisted and ultrasound-assisted liposuction. These techniques, however, have been largely limited in their inability to address significant skin excess and ptosis. For mild to moderate gynecomastia, newer techniques using arthroscopic morcellation and endoscopic techniques promise to address the fibrous component, while minimizing scar burden by utilizing liposuction incisions. Nevertheless, direct excision through periareolar incisions remains a mainstay in treatment algorithms for its simplicity and avoidance of additional instrumentation. This is particularly true for more severe cases of gynecomastia requiring skin resection. In the most severe cases with significant skin redundancy and ptosis, breast amputation with free nipple grafting remains an effective option. Surgical treatment should be individualized to each patient, combining techniques to provide adequate resection and optimize aesthetic results.

Surgical and procedural skills training at medical school - a national review.

Science.gov (United States)

Davis, Christopher R; Toll, Edward C; Bates, Anthony S; Cole, Matthew D; Smith, Frank C T

2014-01-01

This national study quantifies procedural and surgical skills training at medical schools in the United Kingdom (UK), a stipulated requirement of all graduates by the General Medical Council (GMC). A questionnaire recorded basic procedural and surgical skills training provided by medical schools and surgical societies in the UK. Skills were extracted from (1) GMC Tomorrows Doctors and (2) The Royal College of Surgeons Intercollegiate Basic Surgical Skills (BSS) course. Data from medical school curricula and extra-curricular student surgical societies were compared against the national GMC guidelines and BSS course content. Data were analysed using Mann-Whitney U tests. Representatives from 23 medical schools completed the survey (71.9% response). Thirty one skills extracted from the BSS course were split into 5 categories, with skills content cross referenced against GMC documentation. Training of surgical skills by medical schools was as follows: Gowning and gloving (72.8%), handling instruments (29.4%), knot tying (17.4%), suturing (24.7%), other surgical techniques (4.3%). Surgical societies provided significantly more training of knot tying (64.4%, P = 0.0013) and suturing (64.5%, P = 0.0325) than medical schools. Medical schools provide minimal basic surgical skills training, partially supplemented by extracurricular student surgical societies. Our findings suggest senior medical students do not possess simple surgical and procedural skills. Newly qualified doctors are at risk of being unable to safely perform practical procedures, contradicting GMC Guidelines. We propose a National Undergraduate Curriculum in Surgery and Surgical Skills to equip newly qualified doctors with basic procedural skills to maximise patient safety. Copyright © 2014 Surgical Associates Ltd. Published by Elsevier Ltd. All rights reserved.

The surgical stress response: should it be prevented?

DEFF Research Database (Denmark)

Kehlet, H

1991-01-01

clinical trials have demonstrated a reduction in various aspects of postoperative morbidity by such a nociceptive blockade. Although a causal relationship has still to be demonstrated, these findings strongly argue the concept of "stress-free anesthesia and surgery" as an important instrument in improving......Postoperative complications such as myocardial infarction, pulmonary infection, thromboembolism and fatigue are probably related to increased demands, hypermetabolism, catabolism and other physiologic changes included in the global "surgical stress response." Strategies have been developed...... to suppress the detrimental components of the stress response so as to improve postoperative outcome. Of the various techniques to reduce the surgical stress response, afferent neural blockade with regional anesthesia to relieve pain is the most effective, although not optimal. Data from numerous controlled...

Les répétitifs, la machine et l’instrument

Directory of Open Access Journals (Sweden)

Johan Girard

2011-03-01

Full Text Available La poétique des compositeurs répétitifs américains Terry Riley, Steve Reich et Philip Glass repose sur des usages spécifiques de l’instrument de musique. C’est tout d’abord l’indigence des ressources instrumentales et le recours à des instruments de fortune, comme l’orgue électrique. C’est également l’usage de l’amplification dans la composition du timbre et le traitement percussif des instruments à clavier, en particulier chez Steve Reich. Enfin, le « transfert » de structures issues de la musique pour bande vers l’écriture traditionnelle détermine les choix et les usages de l’instrument, par des mises en boucle, des effets d’accumulation, un jeu sur l’indiscernabilité des timbres et une attention aux plus infimes détails émergeant de la répétitivité du jeu, de sorte que les choix esthétiques des trois compositeurs impliquent une gestion spécifique de l’instrument de musique.« Repetitive Music, the machine and the instrument ». The poetics of American repetitive composers Terry Riley, Steve Reich and Philip Glass are based on a specific use of musical instruments. First we can notice the use of indigent instrumental means and rudimentary instruments like the electric organ. Second we point out the use of amplification in timbre composition and the percussive use of keyboard instruments (particularly in Steve Reich’s work. Finally, a structural “transfer” from tape music to traditional musical composition determines the choices and uses of musical instruments, trough tape looping, accumulation effects and a play on timbre indiscernibility that brings attention to the most subtle details emerging from repetition, so that the three composers’ aesthetic choices imply a specific relation to musical instruments.

Effects on instruments of the World Health Organization--recommended protocols for decontamination after possible exposure to transmissible spongiform encephalopathy-contaminated tissue.

Science.gov (United States)

Brown, Stanley A; Merritt, Katharine; Woods, Terry O; Busick, Deanna N

2005-01-15

It has been recommended by the World Health Organization (WHO) and Centers for Disease Control and Prevention (CDC) that rigorous decontamination protocols be used on surgical instruments that have been exposed to tissue possibly contaminated with Creutzfeldt-Jakob disease (CJD). This study was designed to examine the effects of these protocols on various types of surgical instruments. The most important conclusions are: (1) autoclaving in 1N NaOH will cause darkening of some instruments; (2) soaking in 1N NaOH at room temperature damages carbon steel but not stainless steel or titanium; (3) soaking in chlorine bleach will badly corrode gold-plated instruments and will damage some, but not all, stainless-steel instruments, especially welded and soldered joints. Damage became apparent after the first exposure and therefore long tests are not necessary to establish which instruments will be damaged. Copyright 2004 Wiley Periodicals, Inc.

Calibration of the MSL/ChemCam/LIBS Remote Sensing Composition Instrument

Science.gov (United States)

Wiens, R. C.; Maurice S.; Bender, S.; Barraclough, B. L.; Cousin, A.; Forni, O.; Ollila, A.; Newsom, H.; Vaniman, D.; Clegg, S.;

Technician Shawn Warren carefully smoothes out the composite skin of an instrument fairing atop the

Science.gov (United States)

2002-01-01

Technician Shawn Warren carefully smoothes out the composite skin of an instrument fairing atop the upper fuselage of the Altair unmanned aerial vehicle (UAV) at General Atomics Aeronautical Systems, Inc., facility at Adelanto, Calif. General Atomics Aeronautical Systems, Inc., is developing the Altair version of its Predator B unmanned reconnaissance aircraft under NASA's Environmental Research Aircraft and Sensor Technology (ERAST) project. NASA plans to use the Altair as a technology demonstrator to validate a variety of command and control technologies for UAVs, as well as demonstrate the capability to perform a variety of Earth science missions. The Altair is designed to carry an 700-lb. payload of scientific instruments and imaging equipment for as long as 32 hours at up to 52,000 feet altitude. Eleven-foot extensions have been added to each wing, giving the Altair an overall wingspan of 86 feet with an aspect ratio of 23. It is powered by a 700-hp. rear-mounted TPE-331-10 turboprop engine, driving a three-blade propeller. Altair is scheduled to begin flight tests in the fourth quarter of 2002, and be acquired by NASA following successful completion of basic airworthiness tests in early 2003 for evaluation of over-the-horizon control, detect, see and avoid and other technologies required to allow UAVs to operate safely with other aircraft in the national airspace.

Surgical ergonomics. Analysis of technical skills, simulation models and assessment methods.

Science.gov (United States)

Papaspyros, Sotiris C; Kar, Ashok; O'Regan, David

2015-06-01

Over the past two centuries the surgical profession has undergone a profound evolution in terms of efficiency and outcomes. Societal concerns in relation to quality assurance, patient safety and cost reduction have highlighted the issue of training expert surgeons. The core elements of a training model build on the basic foundations of gross and fine motor skills. In this paper we provide an analysis of the ergonomic principles involved and propose relevant training techniques. We have endeavored to provide both the trainer and trainee perspectives. This paper is structured into four sections: 1) Pre-operative preparation issues, 2) technical skills and instrument handling, 3) low fidelity simulation models and 4) discussion of current concepts in crew resource management, deliberate practice and assessment. Rehearsal, warm-up and motivation-enhancing techniques aid concentration and focus. Appropriate posture, comprehension of ergonomic principles in relation to surgical instruments and utilisation of the non-dominant hand are essential skills to master. Low fidelity models can be used to achieve significant progress through the early stages of the learning curve. Deliberate practice and innate ability are complementary to each other and may be considered useful adjuncts to surgical skills development. Safe medical care requires that complex patient interventions be performed by highly skilled operators supported by reliable teams. Surgical ergonomics lie at the heart of any training model that aims to produce professionals able to function as leaders of a patient safety oriented culture. Copyright © 2015 IJS Publishing Group Limited. Published by Elsevier Ltd. All rights reserved.

Management of wound infection after lumbar arthrodesis maintaining the instrumentation

Directory of Open Access Journals (Sweden)

Asdrubal Falavigna

2015-06-01

Full Text Available OBJECTIVE: To determinate whether a surgical protocol with immediate extensive debridement, closed irrigation system and antibiotic therapy would be effective to achieve healing of deep wound infection without removing the instrumentation.METHODS: Prospective cohort study with 19 patients presenting degenerative spinal stenosis or degenerative spondylolisthesis, who developed infection after posterior lumbar arthrodesis. The diagnosis was confirmed by a microbial culture from subfascial lumbar fluid and/or blood. Patients were treated with a protocol of wound exploration, extensive flushing and debridement, placement of a closed irrigation system that was maintained for five days and intravenous antibiotics. The instrumentation system was not removed.RESULTS: Mean age was 59.31 (±13.17 years old and most patients were female (94.7%; 18/19. The mean period for the identification of the infection was 2 weeks and 57.9% underwent a single wound exploration. White blood count, erythrocyte sedimentation rate and C-reactive protein showed a significant decrease post-treatment when compared to pre-treatment values. A significant reduction of erythrocyte sedimentation rate and C-reactive protein was also observed at the final evaluation. No laboratory test was useful to predict the need for more than one debridement.CONCLUSION: Patients with wound infection after instrumentation can be treated without removal of the instrumentation through wound exploration, extensive flushing, debridement of necrotic tissue, closed irrigation system during 5 days and proper antibiotic therapy. The blood tests were not useful to predict surgical re-interventions.

Surgical implantation techniques for electronic tags in fish

Energy Technology Data Exchange (ETDEWEB)

Wagner, Glenn N.; Cooke, Steven J.; Brown, Richard S.; Deters, Katherine A.

2011-01-01

Intracoelomic implantation of transmitters into fish requires making a surgical incision, incision closure, and other surgery related techniques; however, the tools and techniques used in the surgical process vary widely. We review the available literature and focus on tools and techniques used for conducting surgery on juvenile salmonids because of the large amount of research that is conducted on them. The use of sterilized surgical instruments properly selected for a given size of fish will minimize tissue damage and infection rates, and speed the wound healing of fish implanted with transmitters. For the implantation of transmitters into small fish, the optimal surgical methods include making an incision on the ventral midline along the linea alba (for studies under 1 month), protecting the viscera (by lifting the skin with forceps while creating the incision), and using absorbable monofilament suture with a small-swaged-on swaged-on tapered or reverse-cutting needle. Standardizing the implantation techniques to be used in a study involving particular species and age classes of fish will improve survival and transmitter retention while allowing for comparisons to be made among studies and across multiple years. This review should be useful for researchers working on juvenile salmonids and other sizes and species of fish.

Motorization of a surgical microscope for intra-operative navigation and intuitive control.

Science.gov (United States)

Finke, M; Schweikard, A

2010-09-01

During surgical procedures, various medical systems, e.g. microscope or C-arm, are used. Their precise and repeatable manual positioning can be very cumbersome and interrupts the surgeon's work flow. Robotized systems can assist the surgeon but they require suitable kinematics and control. However, positioning must be fast, flexible and intuitive. We describe a fully motorized surgical microscope. Hardware components as well as implemented applications are specified. The kinematic equations are described and a novel control concept is proposed. Our microscope combines fast manual handling with accurate, automatic positioning. Intuitive control is provided by a small remote control mounted to one of the surgical instruments. Positioning accuracy and repeatability are system assists the surgeon, so that he can position the microscope precisely and repeatedly without interrupting the clinical workflow. The combination of manual und automatic control guarantees fast and flexible positioning during surgical procedures. Copyright 2010 John Wiley & Sons, Ltd.

Microscope-integrated optical coherence tomography: A new surgical tool in vitreoretinal surgery.

Science.gov (United States)

Jayadev, Chaitra; Dabir, Supriya; Vinekar, Anand; Shah, Urmil; Vaid, Tania; Yadav, Naresh Kumar

2015-05-01

Optical coherence tomography (OCT) has revolutionized imaging of ocular structures and various disease conditions. Though it has been used in the clinic for some decades, the OCT has only recently found its way into the operating theater. Early attempts at intraoperative OCT, hand-held and microscope mounted, have already improved our understanding of the surgical pathology and the role it might play in surgical decision-making. The microscope-integrated OCT now allows seamless, high-resolution, real-time imaging of surgical maneuvers from the incision to wound closure. Visualization of instruments and intraoperative tissue manipulation are possible with this in vivo modality and, therefore, help improve the outcome of surgery. In this article, we describe the advantages it offers during various vitreoretinal procedures.

Trends in the Surgical Correction of Gynecomastia

Science.gov (United States)

Brown, Rodger H.; Chang, Daniel K.; Siy, Richard; Friedman, Jeffrey

2015-01-01

Gynecomastia refers to the enlargement of the male breast due to a proliferation of ductal, stromal, and/or fatty tissue. Although it is a common condition affecting up to 65% of men, not all cases require surgical intervention. Contemporary surgical techniques in the treatment of gynecomastia have become increasingly less invasive with the advent of liposuction and its variants, including power-assisted and ultrasound-assisted liposuction. These techniques, however, have been largely limited in their inability to address significant skin excess and ptosis. For mild to moderate gynecomastia, newer techniques using arthroscopic morcellation and endoscopic techniques promise to address the fibrous component, while minimizing scar burden by utilizing liposuction incisions. Nevertheless, direct excision through periareolar incisions remains a mainstay in treatment algorithms for its simplicity and avoidance of additional instrumentation. This is particularly true for more severe cases of gynecomastia requiring skin resection. In the most severe cases with significant skin redundancy and ptosis, breast amputation with free nipple grafting remains an effective option. Surgical treatment should be individualized to each patient, combining techniques to provide adequate resection and optimize aesthetic results. PMID:26528088

Reducing healthcare costs facilitated by surgical auditing: a systematic review.

Science.gov (United States)

Govaert, Johannes Arthuur; van Bommel, Anne Charlotte Madeline; van Dijk, Wouter Antonie; van Leersum, Nicoline Johanneke; Tollenaar, Robertus Alexandre Eduard Mattheus; Wouters, Michael Wilhemus Jacobus Maria

2015-07-01

Surgical auditing has been developed in order to benchmark and to facilitate quality improvement. The aim of this review is to determine if auditing combined with systematic feedback of information on process and outcomes of care results in lower costs of surgical care. A systematic search of published literature before 21-08-2013 was conducted in Pubmed, Embase, Web of Science, and Cochrane Library. Articles were selected if they met the inclusion criteria of describing a surgical audit with cost-evaluation. The systematic search resulted in 3608 papers. Six studies were identified as relevant, all showing a positive effect of surgical auditing on quality of healthcare and therefore cost savings was reported. Cost reductions ranging from $16 to $356 per patient were seen in audits evaluating general or vascular procedures. The highest potential cost reduction was described in a colorectal surgical audit (up to $1,986 per patient). All six identified articles in this review describe a reduction in complications and thereby a reduction in costs due to surgical auditing. Surgical auditing may be of greater value when high-risk procedures are evaluated, since prevention of adverse events in these procedures might be of greater clinical and therefore of greater financial impact. This systematic review shows that surgical auditing can function as a quality instrument and therefore as a tool to reduce costs. Since evidence is scarce so far, further studies should be performed to investigate if surgical auditing has positive effects to turn the rising healthcare costs around. In the future, incorporating (actual) cost analyses and patient-related outcome measures would increase the audits' value and provide a complete overview of the value of healthcare.

The geographical origin and chemical composition in phellinus mushrooms measured by instrumental neutron activation analysis

International Nuclear Information System (INIS)

Lim, J.M.; Sun, G.M.; Moon, J.H.; Chung, Y.S.; Lee, J.H.; Kim, K.H.

2012-01-01

In order to expand the utilization of phellinus mushrooms as a dietary supplement, we attempted to evaluate the chemical composition by measuring its inorganic elemental content with the aid of instrumental neutron activation analysis (INAA). Twenty seven phellinus mushrooms samples were collected from Korea, Cambodia, and Vietnam. A total of 28 elements were analyzed in the phellinus mushroom samples using the INAA. The concentrations of Ca, K, and Mg are much higher than those of other elements in phellinus mushroom samples. The sum of determined elemental concentration in Cambodia samples was about 2-6 times higher than those in Korea and Vietnam samples, respectively. Based on our measurement data, we attempted to discriminate the geographical origin using principal components analysis (PCA) and linear discriminant analysis (LDA). The geographical origins of all samples were clearly classified with correct classification rate of 100%. (author)

New developments for the surgical treatment of shoulder problems

International Nuclear Information System (INIS)

Anderl, W.

2004-01-01

Tremendous advancement has been made in the surgical treatment of the shoulder within the last years. Arthroscopic techniques for treatment of rotator cuff lesions, instability problems and biceps tendon lesions are today established because of significant improvement of instruments, suture materials and anchor techniques. The 4th generation of shoulder prosthesis systems guarantee today anatomical and biomechanical advantages with significant functional improvement for the patient. (orig.) [de

Neutrons and music: Imaging investigation of ancient wind musical instruments

Science.gov (United States)

Festa, G.; Tardino, G.; Pontecorvo, L.; Mannes, D. C.; Senesi, R.; Gorini, G.; Andreani, C.

2014-10-01

A set of seven musical instruments and two instruments cares from the 'Fondo Antico della Biblioteca del Sacro Convento' in Assisi, Italy, were investigated through neutron and X-ray imaging techniques. Historical and scientific interests around ancient musical instruments motivate an intense research effort for their characterization using non-destructive and non-invasive techniques. X-ray and neutron tomography/radiography were applied to the study of composite material samples containing wood, hide and metals. The study was carried out at the NEUTRA beamline, PSI (Paul Scherrer Institute, Switzerland). Results of the measurements provided new information on the composite and multi-scale structure, such as: the internal structure of the samples, position of added materials like metals, wood fiber displays, deformations, presence of adhesives and their spatial distribution and novel insight about construction methods to guide the instruments' restoration process.

Two, four, six, eight... stop and count before it is too late! An audit on swab, needle and instrument counts in theatre.

LENUS (Irish Health Repository)

Donnelly, T.

2014-07-01

A concurrent audit was conducted over a four week period to determine if the counting of swabs, needles and instruments for surgery adhered to local policy and recommended guidelines. Data were collected on 30 abdominal surgical procedures. This audit highlighted failings in the count process. It identified poor communication within the multidisciplinary team. There needs to be an increased awareness about local policy, national and international guidelines regarding the counting of swabs, needles and instruments for all surgical procedures.

28 CFR 552.13 - X-ray, major instrument, fluoroscope, or surgical intrusion.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false X-ray, major instrument, fluoroscope, or... INSTITUTIONAL MANAGEMENT CUSTODY Searches of Housing Units, Inmates, and Inmate Work Areas § 552.13 X-ray, major... reasons only, with the inmate's consent. (b) The institution physician may authorize use of an X-ray for...

The U-Pu inspector, a new instrument to determine the isotopic compositions of uranium and plutonium

International Nuclear Information System (INIS)

Verplancke, J.; Van Dyck, R.; Tench, O.; Sielaff, B.

1994-01-01

The U/Pu-InSpector is a new integrated, portable instrument that can measure the isotopic composition of samples containing uranium and/or plutonium without prior calibration and without the need for skilled operators. It consists of a Low Energy Germanium detector in a Multi-attitude Cryostat (MAC). A shield and collimator are built-in, directly around the detector element, reducing the weight of this detector and shield to approximately 8 kg with a full dewar. The dewar can quickly and easily be filled with a self-pressurizing funnel. The detector is connected to a small portable battery operated analyzer and a Notebook computer. The spectra are automatically stored and analyzed with the help of the MGA codes for plutonium and/or for uranium. 5 refs., 1 fig

WHO Safety Surgical Checklist implementation evaluation in public hospitals in the Brazilian Federal District

Directory of Open Access Journals (Sweden)

Heiko T. Santana

2016-09-01

Full Text Available Summary: The World Health Organization (WHO created the WHO Surgical Safety Checklist to prevent adverse events in operating rooms. The aim of this study was to analyze WHO checklist implementation in three operating rooms of public hospitals in the Brazilian Federal District. A prospective cross-sectional study was performed with pre- (Period I and post (Period II-checklist intervention evaluations. A total of 1141 patients and 1052 patients were studied in Periods I and II for a total of 2193 patients. Period I took place from December 2012 to March 2013, and Period II took place from April 2013 to August 2014. Regarding the pre-operatory items, most surgeries were classified as clean-contaminated in both phases, and team attire improved from 19.2% to 71.0% in Period II. Regarding checklist adherence in Period II, “Patient identification” significantly improved in the stage “Before induction of anesthesia”. “Allergy verification”, “Airway obstruction verification”, and “Risk of blood loss assessment” had low adherence in all three hospitals. The items in the stage “Before surgical incision” showed greater than 90.0% adherence with the exception of “Anticipated critical events: Anesthesia team review” (86.7% and “Essential imaging display” (80.0%. Low adherence was noted in “Instrument counts” and “Equipment problems” in the stage “Before patient leaves operating room”. Complications and deaths were low in both periods. Despite the variability in checklist item compliance in the surveyed hospitals, WHO checklist implementation as an intervention tool showed good adherence to the majority of the items on the list. Nevertheless, motivation to use the instrument by the surgical team with the intent of improving surgical patient safety continues to be crucial. Keywords: Surgical checklist, Adverse events, Patient safety, Surgical team, Infection control

Utilization of the NASA Robonaut as a Surgical Avatar in Telemedicine

Science.gov (United States)

Dean, Marc; Diftler, Myron

2015-01-01

The concept of teleoperated robotic surgery is not new; however, most of the work to date has utilized specialized robots designed for specific set of surgeries. This activity explores the use of a humanoid robot to perform surgical procedures using the same hand held instruments that a human surgeon employs. For this effort, the tele-operated Robonaut (R2) was selected due to its dexterity, its ability to perform a wide range of tasks, and its adaptability to changing environments. To evaluate this concept, a series of challenges was designed with the goal of assessing the feasibility of utilizing Robonaut as a telemedicine based surgical avatar.

Spinal instrumentation for unstable C1-2 injury.

Science.gov (United States)

Mizuno, J; Nakagawa, H

1999-06-01

Seventeen patients with unstable C1-2 injuries were treated between 1990 and 1997. Various methods of instrumentation surgery were performed in 16 patients, excluding a case of atlantoaxial rotatory fixation. Posterior stabilization was carried out in 14 cases using Halifax interlaminar clamp, Sof'wire or Danek cable, or more recently, transarticular screws. Transodontoid anterior screw fixation was performed in four cases of odontoid process fractures, with posterior instrumentation in two cases because of malunion. Rigid internal fixation by instrumentation surgery for the unstable C1-2 injury avoids long-term application of a Halo brace and facilitates early rehabilitation. However, the procedure is technically demanding with the risk of neural and vascular injuries, particularly with posterior screw fixation. Sagittal reconstruction of thin-sliced computed tomography scans at the C1-2 region, neuronavigator, and intraoperative fluoroscopy are essential to allow preoperative surgical planning and intraoperative guidance.

Comparison and determination of elemental composition in Korean space foods using instrumental neutron activation analysis

International Nuclear Information System (INIS)

Yong-Sam Chung; Sun-Ha Kim; Gwang-Min Sun; Jong-Hwa Moon; Jong-Il Choi; Beom-Seok Song; Jae-Hun Kim

2013-01-01

A quantitative analysis of mineral contents in several kinds of foods is needed to obtain information on a comprehensive elemental composition as well as an investigation on the effects of human health and nutrition based on the dietary intake of mineral elements. In 2012, six kinds of new Korean space foods (KSF) such as sweet pumpkin porridge, dakgalbi (spicy grilled chicken), Manila clam porridge, ox leg bone-cabbage soup, ginseng-chicken porridge, and chicken curry rice were developed by KAERI, and the contents of more than 15 elements in the samples were determined using an instrumental neutron activation analysis. A certified reference material associated with a biological food sample was used for analytical quality control. The analytical results were evaluated according to the elemental concentrations with KSF samples and compared with the reported values. These results will be applied toward the identification of gamma-irradiated foods. (author)

Retention of fundamental surgical skills learned in robot-assisted surgery.

Science.gov (United States)

Suh, Irene H; Mukherjee, Mukul; Shah, Bhavin C; Oleynikov, Dmitry; Siu, Ka-Chun

2012-12-01

Evaluation of the learning curve for robotic surgery has shown reduced errors and decreased task completion and training times compared with regular laparoscopic surgery. However, most training evaluations of robotic surgery have only addressed short-term retention after the completion of training. Our goal was to investigate the amount of surgical skills retained after 3 months of training with the da Vinci™ Surgical System. Seven medical students without any surgical experience were recruited. Participants were trained with a 4-day training program of robotic surgical skills and underwent a series of retention tests at 1 day, 1 week, 1 month, and 3 months post-training. Data analysis included time to task completion, speed, distance traveled, and movement curvature by the instrument tip. Performance of the participants was graded using the modified Objective Structured Assessment of Technical Skills (OSATS) for robotic surgery. Participants filled out a survey after each training session by answering a set of questions. Time to task completion and the movement curvature was decreased from pre- to post-training and the performance was retained at all the corresponding retention periods: 1 day, 1 week, 1 month, and 3 months. The modified OSATS showed improvement from pre-test to post-test and this improvement was maintained during all the retention periods. Participants increased in self-confidence and mastery in performing robotic surgical tasks after training. Our novel comprehensive training program improved robot-assisted surgical performance and learning. All trainees retained their fundamental surgical skills for 3 months after receiving the training program.

Abortion - surgical

Science.gov (United States)

Suction curettage; Surgical abortion; Elective abortion - surgical; Therapeutic abortion - surgical ... Surgical abortion involves dilating the opening to the uterus (cervix) and placing a small suction tube into the uterus. ...

Developing Process Maps as a Tool for a Surgical Infection Prevention Quality Improvement Initiative in Resource-Constrained Settings.

Science.gov (United States)

Forrester, Jared A; Koritsanszky, Luca A; Amenu, Demisew; Haynes, Alex B; Berry, William R; Alemu, Seifu; Jiru, Fekadu; Weiser, Thomas G

2018-06-01

Surgical infections cause substantial morbidity and mortality in low-and middle-income countries (LMICs). To improve adherence to critical perioperative infection prevention standards, we developed Clean Cut, a checklist-based quality improvement program to improve compliance with best practices. We hypothesized that process mapping infection prevention activities can help clinicians identify strategies for improving surgical safety. We introduced Clean Cut at a tertiary hospital in Ethiopia. Infection prevention standards included skin antisepsis, ensuring a sterile field, instrument decontamination/sterilization, prophylactic antibiotic administration, routine swab/gauze counting, and use of a surgical safety checklist. Processes were mapped by a visiting surgical fellow and local operating theater staff to facilitate the development of contextually relevant solutions; processes were reassessed for improvements. Process mapping helped identify barriers to using alcohol-based hand solution due to skin irritation, inconsistent administration of prophylactic antibiotics due to variable delivery outside of the operating theater, inefficiencies in assuring sterility of surgical instruments through lack of confirmatory measures, and occurrences of retained surgical items through inappropriate guidelines, staffing, and training in proper routine gauze counting. Compliance with most processes improved significantly following organizational changes to align tasks with specific process goals. Enumerating the steps involved in surgical infection prevention using a process mapping technique helped identify opportunities for improving adherence and plotting contextually relevant solutions, resulting in superior compliance with antiseptic standards. Simplifying these process maps into an adaptable tool could be a powerful strategy for improving safe surgery delivery in LMICs. Copyright © 2018 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

The surgical management of the rheumatoid spine: Has the evolution of surgical intervention changed outcomes?

Directory of Open Access Journals (Sweden)

Robin Bhatia

2014-01-01

Full Text Available Context: Surgery for the rheumatoid cervical spine has been shown to stabilize the unstable spine; arrest/improve the progression of neurological deficit, help neck pain, and possibly decelerate the degenerative disease process. Operative intervention for the rheumatoid spine has significantly changed over the last 30 years. Aims: The purpose of this study was to review all cases of cervical rheumatoid spine requiring surgical intervention in a single unit over the last 30 years. Materials and Methods: A prospectively-maintained spine database was retrospectively searched for all cases of rheumatoid spine, leading to a review of indications, imaging, Ranawat and Myelopathy Disability Index measures, surgical morbidity, and survival curve analysis. Results: A total of 224 cases were identified between 1981 and 2011. Dividing the data into three time-epochs, there has been a significant increase in the ratio of segment-saving Goel-Harms C1-C2: Occipitocervical fixation (OCF surgery and survival has increased between 1981 and 2011 from 30% to 51%. Patients undergoing C1-C2 fixation were comparatively less myelopathic and in a better Ranawat class preoperatively, but postoperative outcome measures were well-preserved with favorable mortality rates over mean 39.6 months of follow-up. However, 11% of cases required OCF at mean 28 months post-C1-C2 fixation, largely due to instrumentation failure (80%. Conclusion: We present the largest series of surgically managed rheumatoid spines, revealing comparative data on OCF and C1-C2 fixation. Although survival has improved over the last 30 years, there have been changes in medical, surgical and perioperative management over that period of time too confounding the interpretation; however, the analysis presented suggests that rheumatoid patients presenting early in the disease process may benefit from C1 to C2 fixation, albeit with a proportion requiring OCF at a later time.

Thoracic surgical resident education: a costly endeavor.

Science.gov (United States)

Calhoon, John H; Baisden, Clint; Holler, Ben; Hicks, George L; Bove, Ed L; Wright, Cameron D; Merrill, Walter H; Fullerton, Dave A

2014-12-01

We sought to define an accurate measure of thoracic surgical education costs. Program directors from six distinct and differently sized and geographically located thoracic surgical training programs used a common template to provide estimates of resident educational costs. These data were reviewed, clarifying questions or discrepancies when noted and using best estimates when exact data were unavailable. Subsequently, a composite of previously published cost-estimation products was used to capture accurate cost data. Data were then compiled and averaged to provide an accurate picture of all costs associated with thoracic surgical education. Before formal accounting was performed, the estimated average for all programs was approximately $250,000 per year per resident. However, when formal evaluations by the six programs were performed, the annual cost of resident education ranged from $330,000 to $667,000 per year per resident. The average cost of $483,000 per year was almost double the initial estimates. Variability was noted by region and size of program. Faculty teaching costs varied from $208,000 to $346,000 per year. Simulation costs ranged from $0 to $80,000 per year. Resident savings to program ranged from $0 to $135,000 per year and averaged $37,000 per year per resident. Thoracic surgical education costs are considerably higher than initial estimates from program directors and probably represent an unappreciated source of financial burden for cardiothoracic surgical educational programs. Copyright © 2014 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

Technical and instrumental prerequisites for single-port laparoscopic solo surgery: state of art.

Science.gov (United States)

Kim, Say-June; Lee, Sang Chul

2015-04-21

With the aid of advanced surgical techniques and instruments, single-port laparoscopic surgery (SPLS) can be accomplished with just two surgical members: an operator and a camera assistant. Under these circumstances, the reasonable replacement of a human camera assistant by a mechanical camera holder has resulted in a new surgical procedure termed single-port solo surgery (SPSS). In SPSS, the fixation and coordinated movement of a camera held by mechanical devices provides fixed and stable operative images that are under the control of the operator. Therefore, SPSS primarily benefits from the provision of the operator's eye-to-hand coordination. Because SPSS is an intuitive modification of SPLS, the indications for SPSS are the same as those for SPLS. Though SPSS necessitates more actions than the surgery with a human assistant, these difficulties seem to be easily overcome by the greater provision of static operative images and the need for less lens cleaning and repositioning of the camera. When the operation is expected to be difficult and demanding, the SPSS process could be assisted by the addition of another instrument holder besides the camera holder.

Can surgical simulation be used to train detection and classification of neural networks?

Science.gov (United States)

Zisimopoulos, Odysseas; Flouty, Evangello; Stacey, Mark; Muscroft, Sam; Giataganas, Petros; Nehme, Jean; Chow, Andre; Stoyanov, Danail

2017-10-01

Computer-assisted interventions (CAI) aim to increase the effectiveness, precision and repeatability of procedures to improve surgical outcomes. The presence and motion of surgical tools is a key information input for CAI surgical phase recognition algorithms. Vision-based tool detection and recognition approaches are an attractive solution and can be designed to take advantage of the powerful deep learning paradigm that is rapidly advancing image recognition and classification. The challenge for such algorithms is the availability and quality of labelled data used for training. In this Letter, surgical simulation is used to train tool detection and segmentation based on deep convolutional neural networks and generative adversarial networks. The authors experiment with two network architectures for image segmentation in tool classes commonly encountered during cataract surgery. A commercially-available simulator is used to create a simulated cataract dataset for training models prior to performing transfer learning on real surgical data. To the best of authors' knowledge, this is the first attempt to train deep learning models for surgical instrument detection on simulated data while demonstrating promising results to generalise on real data. Results indicate that simulated data does have some potential for training advanced classification methods for CAI systems.

Development and preliminary validation of a post-fistula repair reintegration instrument among Ugandan women.

Science.gov (United States)

El Ayadi, Alison; Nalubwama, Hadija; Barageine, Justus; Neilands, Torsten B; Obore, Susan; Byamugisha, Josaphat; Kakaire, Othman; Mwanje, Haruna; Korn, Abner; Lester, Felicia; Miller, Suellen

2017-09-02

Obstetric fistula is a debilitating and traumatic birth injury affecting 2-3 million women globally, mostly in sub-Saharan Africa and Asia. Affected women suffer physically, psychologically and socioeconomically. International efforts have increased access to surgical treatment, yet attention to a holistic outcome of post-surgical rehabilitation is nascent. We sought to develop and pilot test a measurement instrument to assess post-surgical family and community reintegration. We conducted an exploratory sequential mixed-methods study, beginning with 16 in-depth interviews and four focus group discussions with 17 women who underwent fistula surgery within two previous years to inform measure development. The draft instrument was validated in a longitudinal cohort of 60 women recovering from fistula surgery. Qualitative data were analyzed through thematic analysis. Socio-demographic characteristics were described using one-way frequency tables. We used exploratory factor analysis to determine the latent structure of the scale, then tested the fit of a single higher-order latent factor. We evaluated internal consistency and temporal stability reliability through Raykov's ρ and Pearson's correlation coefficient, respectively. We estimated a series of linear regression models to explore associations between the standardized reintegration measure and validated scales representing theoretically related constructs. Themes central to women's experiences following surgery included resuming mobility, increasing social interaction, improved self-esteem, reduction of internalized stigma, resuming work, meeting their own needs and the needs of dependents, meeting other expected and desired roles, and negotiating larger life issues. We expanded the Return to Normal Living Index to reflect these themes. Exploratory factor analysis suggested a four-factor structure, titled 'Mobility and social engagement', 'Meeting family needs', 'Comfort with relationships', and 'General life

Post surgical complications from students' large animal surgical ...

African Journals Online (AJOL)

A retrospective study of post surgical complications was conducted on records of students' Large Animal Surgical Laboratories in the Faculty of Veterinary Medicine (F.V.M.), Ahmadu Bello University (A.B.U), Zaria from 1989 to 1993. Three hundred and eleven surgical complications were recorded from five surgical ...

[Changing surgical therapy because of clinical studies?].

Science.gov (United States)

Schwenk, W; Haase, O; Müller, J M

2002-04-01

The randomised controlled clinical trial (RCT) is a powerful instrument to evaluate different therapeutic regimens. In a survey among 115 physicians visiting the 25th annual meeting of the Surgical Society of Berlin and Brandenburg, the RCT was judged to be very important when changes of therapeutic strategies are discussed. 90 % of all participants claimed to use data from RCTs in the clinical routine and 89 % would participate in such a trial. In official (e. g. discussions during coffee breaks at scientific meetings) or non-medical (e. g. non-scientific press or media) sources of information were assessed as irrelevant for decisions regarding therapeutic strategies. However, in contrast to this view laparoscopic cholecystectomy was introduced into clinical practice rapidly because patients informed by external (non-medical) sources preferred to be operated on with the "modern" technique. Clinical trials with a high level of evidence had no relevant influence on the rapid distribution of laparoscopic cholecystectomy. Controversial discussions concerning the extent of lymphadenectomy with gastric resection for carcinoma demonstrate that the value of excellent clinical RCTs is low if their results challenge a stable paradigma of the surgical scientific society. To allow a rational judgement, new surgical technologies should undergo a scientific gradual evaluation in agreement with the principles of evidence based medicine.

Instrumented fusion in a 12-month-old with atlanto-occipital dislocation: case report and literature review of infant occipitocervical fusion.

Science.gov (United States)

Hale, Andrew T; Dewan, Michael C; Patel, Bhairav; Geck, Matthew J; Tomycz, Luke D

2017-08-01

The treatment of atlantoaxial dislocation in very young children is challenging and lacks a consensus management strategy. We review the literature on infantile occipitocervical (OC) fusion is appraised and technical considerations are organized for ease of reference. Surgical decisions such as graft type and instrumentation details are summarized, along with the use of bone morphogenic protein and post-operative orthoses. We present the case of a 12-month-old who underwent instrumented occipitocervical (OC) fusion in the setting of traumatic atlanto-occipital dislocation (AOD). Occipitocervical (OC) arthrodesis is obtainable in very young infants and children. Surgical approaches are variable and use a combination of autologous grafting and creative screw and/or wire constructs. The heterogeneity of pathologic etiology leading to OC fusion makes it difficult to make definitive recommendations for surgical management.

Effect of Surgical Approach on Pulmonary Function in Adolescent Idiopathic Scoliosis Patients: A Systemic Review and Meta-analysis.

Science.gov (United States)

Lee, Andy C H; Feger, Mark A; Singla, Anuj; Abel, Mark F

2016-11-15

Systemic review and meta-analysis. To analyze the effect of spinal fusion and instrumentation for adolescent idiopathic scoliosis (AIS) on absolute pulmonary function test (PFTs). Pulmonary function is correlated with severity of deformity in AIS patients and studies that have analyzed the effect of spinal fusion and instrumentation on PFTs for AIS have reported inconsistent results. There is a need to analyze the effect of spinal fusion on PFTs with stratification by surgical approach. Our analysis included 22 studies. Cohen's d effect sizes were calculated for absolute PFT outcome measures with 95% confidence intervals (CI). Meta-analyses were performed at each postoperative time frame for six homogeneous surgical approaches: (i) combined anterior release and posterior fusion with instrumentation; (ii) combined video assisted anterior release and posterior fusion with instrumentation without thoracoplasty; (iii) posterior fusion with instrumentation without thoracoplasty; (iv) anterior fusion with instrumentation and without thoracoplasty; (v) video assisted anterior fusion with instrumentation without thoracoplasty; and (vi) any scoliosis surgery with additional thoracoplasty. Anterior spinal fusion with instrumentation, any scoliosis surgery with concomitant thoracoplasty, or video-assisted anterior fusion with instrumentation for AIS had similar absolute PFTs at their 2 year postoperative follow up compared with their preoperative PFTs (effect sizes ranging from -0.2-0.2 with all CI crossing "0"). Posterior spinal fusion with instrumentation (with or without an anterior release) demonstrated small to moderate increases in PFTs 2 years postoperatively (effect sizes ranging from 0.35-0.65 with all CI not crossing "0"). Anterior fusion with instrumentation, regardless of the approach, and any scoliosis surgery with concomitant thoracoplasty do not lead to significant change in pulmonary functions 2 year after surgery. Posterior spinal fusion with instrumentation

Portable Chemical Sterilizer for Microbial Decontamination of Surgical Instruments, Fruits and Vegetables, and Field Feeding Equipment

National Research Council Canada - National Science Library

Doona, C. J; Feeherry, F. E; Kustin, K; Curtin, M. A; Baer, D. G

2006-01-01

The Portable Chemical Sterilizer (PCS) is a revolutionary biomedical sterilization technology that provides the capability for portable, power-free, point-of-use sterilization to meet the Army's Far-Forward Surgical Teams (FSTs...

Surgeon-tool force/torque signatures--evaluation of surgical skills in minimally invasive surgery.

Science.gov (United States)

Rosen, J; MacFarlane, M; Richards, C; Hannaford, B; Sinanan, M

1999-01-01

The best method of training for laparoscopic surgical skills is controversial. Some advocate observation in the operating room, while others promote animal and simulated models or a combination of surgical related tasks. The mode of proficiency evaluation common to all of these methods has been subjective evaluation by a skilled surgeon. In order to define an objective means of evaluating performance, an instrumented laparoscopic grasper was developed measuring the force/torque at the surgeon hand/tool interface. The measured database demonstrated substantial differences between experienced and novice surgeon groups. Analyzing forces and torques combined with the state transition during surgical procedures allows an objective measurement of skill in MIS. Teaching the novice surgeon to limit excessive loads and improve movement efficiency during surgical procedures can potentially result in less injury to soft tissues and less wasted time during laparoscopic surgery. Moreover the force/torque database measured in this study may be used for developing realistic virtual reality simulators and optimization of medical robots performance.

Preoperative and perioperative factors effect on adolescent idiopathic scoliosis surgical outcomes.

Science.gov (United States)

Sanders, James O; Carreon, Leah Y; Sucato, Daniel J; Sturm, Peter F; Diab, Mohammad

2010-09-15

Prospective multicenter database. To identify factors associated with outcomes from adolescent idiopathic scoliosis (AIS) surgery outcomes and especially poor results. Because AIS is rarely symptomatic during adolescence, excellent surgical results are expected. However, some patients have poor outcomes. This study seeks to identify factors correlating with results and especially those making poor outcomes more likely. Demographic, surgical, and radiographic parameters were compared to 2-year postoperative Scoliosis Research Society (SRS) scores in 477 AIS surgical patients using stepwise linear regression to identify factors predictive of 2-year domain and total scores. Poor postoperative score patients (>2 SD below mean) were compared using t tests to those with better results. The SRS instrument exhibited a strong ceiling effect. Two-year scores showed more improvement with greater curve correction (self-image, pain, and total), and were worse with larger body mass index (pain, mental, total), larger preoperative trunk shift (mental and total), larger preoperative Cobb (self-image), and preoperative symptoms (function). Poor results were more common in those with Lenke 3 curve pattern (pain), less preoperative coronal imbalance, trunk shift and rib prominence (function), preoperative bracing (self-image), and anterior procedures (mental). Poor results also had slightly less average curve correction (50% vs. 60%) and larger curve residuals (31° vs. 23°). Complications, postoperative curve magnitude, and instrumentation type did not significantly contribute to postoperative scores, and no identifiable factors contributed to satisfaction. Curve correction improves patient's self-image whereas pain and poor function before surgery carry over after surgery. Patients with less spinal appearance issues (higher body mass index, Lenke 3 curves) are less happy with their results. Except in surgical patient selection, many of these factors are beyond physician control.

The impact of missing sensor information on surgical workflow management.

Science.gov (United States)

Liebmann, Philipp; Meixensberger, Jürgen; Wiedemann, Peter; Neumuth, Thomas

2013-09-01

Sensor systems in the operating room may encounter intermittent data losses that reduce the performance of surgical workflow management systems (SWFMS). Sensor data loss could impact SWFMS-based decision support, device parameterization, and information presentation. The purpose of this study was to understand the robustness of surgical process models when sensor information is partially missing. SWFMS changes caused by wrong or no data from the sensor system which tracks the progress of a surgical intervention were tested. The individual surgical process models (iSPMs) from 100 different cataract procedures of 3 ophthalmologic surgeons were used to select a randomized subset and create a generalized surgical process model (gSPM). A disjoint subset was selected from the iSPMs and used to simulate the surgical process against the gSPM. The loss of sensor data was simulated by removing some information from one task in the iSPM. The effect of missing sensor data was measured using several metrics: (a) successful relocation of the path in the gSPM, (b) the number of steps to find the converging point, and (c) the perspective with the highest occurrence of unsuccessful path findings. A gSPM built using 30% of the iSPMs successfully found the correct path in 90% of the cases. The most critical sensor data were the information regarding the instrument used by the surgeon. We found that use of a gSPM to provide input data for a SWFMS is robust and can be accurate despite missing sensor data. A surgical workflow management system can provide the surgeon with workflow guidance in the OR for most cases. Sensor systems for surgical process tracking can be evaluated based on the stability and accuracy of functional and spatial operative results.

Composite materials application on FORMOSAT-5 remote sensing instrument structure

Directory of Open Access Journals (Sweden)

Jen-Chueh Kuo

2017-01-01

Full Text Available Composite material has been widely applied in space vehicle structures due to its light weight and designed stiffness modulus. Some special mechanical properties that cannot be changed in general metal materials, such as low CTE (coefficient of thermal expansion and directional material stiffness can be artificially adjusted in composite materials to meet the user’s requirements. Space-qualified Carbon Fiber Reinforced Plastic (CFRP composite materials are applied In the FORMOSAT-5 Remote Sensing (RSI structure because of its light weight and low CTE characteristics. The RSI structural elements include the primary mirror supporting plate, secondary mirror supporting ring, and supporting frame. These elements are designed, manufactured, and verified using composite materials to meet specifications. The structure manufacturing process, detailed material properties, and CFRP structural element validation methods are introduced in this paper.

[Surgical treatment of cardiovascular manifestations of Marfan syndrome].

Science.gov (United States)

Fukada, J; Morishita, K; Kawaharada, N; Yamada, A; Baba, T; Harada, N; Abe, T

2002-07-01

The present study determines the effect of surgical treatment of cardiovascular manifestations of Marfan syndrome in 72 patients by 114 operations, during 34-year period. This therapy resulted in aortic root repair, aortic arch replacement, or both in 78, mitral valve repair in 9, descending thoracic aortic replacement in 14, thoracoabdominal aortic replacement in 10, and abdominal aortic replacement in 6, including total aortic replacement in 4 and nearly total aortic replacement in 4 patients. Fusiform aneurysms were present in the the ascending aorta in 37, the aortic arch in 2, the thoracoabdominal aorta in 2, and the abdominal aorta in 6 patients. Aortic dissection occurred in 40 (55.6%), including type A aortic dissection in 29 patients. Aortic root repair included separate valve-graft in 8, Bentall composite valve-graft in 25, composite valve-graft with button technique in 26, composite valve-graft with interposition graft technique in 10, and valve sparing procedure in 5 patients. The overall early (30-day) mortality was 7.9%. The early survival was 75% in separate valve-graft procedure and 99.2% in composite valve-graft procedure. Late coronary dehiscence did not occur in the patients with Bentall technique in which the reattachments of coronary ostia were performed in 2 layers, but occurred in 50% of patients with the coronary anastomoses in 1 layer. Aortic valve regurgitation relapsed in 2 of the 5 patients with valve sparing procedure. Event free rate for the patients with composite valve-graft using button technique was 81.1% at 10 years. There were 14 late deaths; dissection or rupture of the residual aorta, composite graft endocarditis and cardiac failure were the principle causes of late deaths. In conclusion, Marfan patients with cardiovascular diseases can undergo surgical treatment with a low operative risk and low morbidity. Although late endocarditis remains a serious problem, we believe that Marfan syndrome is a contraindication for valve

Surgical lighting

NARCIS (Netherlands)

Knulst, A.J.

2017-01-01

The surgical light is an important tool for surgeons to create and maintain good visibility on the surgical task. Chapter 1 gives background to the field of (surgical) lighting and related terminology. Although the surgical light has been developed strongly since its introduction a long time ago,

A software-based tool for video motion tracking in the surgical skills assessment landscape

NARCIS (Netherlands)

Ganni, S.; Botden, Sanne M.B.I.; Chmarra, M.K.; Goossens, R.H.M.; Jakimowicz, J.J.

2018-01-01

Background: The use of motion tracking has been proved to provide an objective assessment in surgical skills training. Current systems, however, require the use of additional equipment or specialised laparoscopic instruments and cameras to extract the data. The aim of this study was to determine

Modern spinal instrumentation. Part 2: Multimodality imaging approach for assessment of complications

International Nuclear Information System (INIS)

Allouni, A.K.; Davis, W.; Mankad, K.; Rankine, J.; Davagnanam, I.

2013-01-01

Radiologists frequently encounter studies demonstrating spinal instrumentation, either as part of the patient's postoperative evaluation, or as incidental to a study performed for another purpose. It is important for the reporting radiologist to identify potential complications of commonly used spinal implants. Part 1 of this review examined both the surgical approaches used and the normal appearances of these spinal implants and bone grafting techniques. This second part of the review will focus on the multimodal imaging strategy adopted in the assessment of the instrumented spine and the demonstration of imaging findings of common postoperative complications.

A novel technique for preventing skin pressure sores using a rubber tube during surgical treatment of mandibular condyle fractures.

Science.gov (United States)

Kawase-Koga, Yoko; Mori, Yoshiyuki; Hoshi, Kazuhito; Takato, Tsuyoshi

2013-11-01

Craniofacial surgery occasionally results in sores and necrosis of the facial skin because of pressure from surgical instruments. During surgical treatment of mandibular condylar process fractures, the main mandibular fragment is routinely retracted downward using a wire to achieve a satisfactory anatomic reduction. This procedure may injure the facial skin. This potential complication is easily overlooked by medical staff, but it is easily preventable. We herein describe a method of using a rubber tube to avoid causing pressure sores of the facial skin during surgical treatment of mandibular condylar process fractures.

The clinical outcomes of surgical treatment of noncontiguous spinal tuberculosis: a retrospective study in 23 cases.

Directory of Open Access Journals (Sweden)

Jia Huang

Full Text Available STUDY DESIGN: A retrospective clinical study. OBJECTIVE: To evaluate the clinical efficacy of the surgical treatment of noncontiguous spinal tuberculosis (NSTB, and to discuss its therapeutic strategies. METHODS: We performed a retrospective review of clinical and radiographic data that were prospectively collected on 550 consecutive spinal tubercular patients including 27 patients who were diagnosed and treated as NSTB in our institution from June 2005 to June 2011. Apart from 4 patients being treated conservatively, the remainder received surgery by posterior transforaminal debridement, interbody fusion with instrumentation, posterior instrumentation and anterior debridement with fusion in a single or two-stage operation. The clinical outcomes were evaluated before and after treatment in terms of hematologic and radiographic examinations, bone fusion and neurologic status. The Oswestry Disability Index score was determined before treatment and at the last follow-up visit. RESULTS: 23 patients (15 M/8F, averaged 44.6 ± 14.2 years old (range, 19 to 70 yd, who received surgical treatment, were followed up after surgery for a mean of 52.5 ± 19.5 months (range, 24 to 72 months. The kyphotic angle was changed significantly between pre- and postoperation (P<0.05. The mean amount of correction was 12.6 ± 7.2 degrees, with a small loss of correction at last follow-up. All patients achieved solid bone fusion. No patients with neurological deficit deteriorated postoperatively. Neither mortalities nor any major complications were found. There was a significant difference of Oswestry Disability Index scores between preoperation and the final follow-up. CONCLUSION: The outcomes of follow-up showed that posterior and posterior-anterior surgical treatment methods were both viable surgical options for NSTB. Posterior transforaminal debridement, interbody fusion and posterior instrumentation, as a less invasive technique, was feasible and effective to treat

Intraocular robotic interventional surgical system (IRISS): Mechanical design, evaluation, and master-slave manipulation.

Science.gov (United States)

Wilson, Jason T; Gerber, Matthew J; Prince, Stephen W; Chen, Cheng-Wei; Schwartz, Steven D; Hubschman, Jean-Pierre; Tsao, Tsu-Chin

2018-02-01

Since the advent of robotic-assisted surgery, the value of using robotic systems to assist in surgical procedures has been repeatedly demonstrated. However, existing technologies are unable to perform complete, multi-step procedures from start to finish. Many intraocular surgical steps continue to be manually performed. An intraocular robotic interventional surgical system (IRISS) capable of performing various intraocular surgical procedures was designed, fabricated, and evaluated. Methods were developed to evaluate the performance of the remote centers of motion (RCMs) using a stereo-camera setup and to assess the accuracy and precision of positioning the tool tip using an optical coherence tomography (OCT) system. The IRISS can simultaneously manipulate multiple surgical instruments, change between mounted tools using an onboard tool-change mechanism, and visualize the otherwise invisible RCMs to facilitate alignment of the RCM to the surgical incision. The accuracy of positioning the tool tip was measured to be 0.205±0.003 mm. The IRISS was evaluated by trained surgeons in a remote surgical theatre using post-mortem pig eyes and shown to be effective in completing many key steps in a variety of intraocular surgical procedures as well as being capable of performing an entire cataract extraction from start to finish. The IRISS represents a necessary step towards fully automated intraocular surgery and demonstrated accurate and precise master-slave manipulation for cataract removal and-through visual feedback-retinal vein cannulation. Copyright © 2017 John Wiley & Sons, Ltd.

Neutrons and music: Imaging investigation of ancient wind musical instruments

Energy Technology Data Exchange (ETDEWEB)

Festa, G., E-mail: giulia.festa@roma2.infn.it [Università degli Studi di Roma Tor Vergata (Italy); Università degli Studi di Milano-Bicocca (Italy); Consiglio Nazionale delle Ricerche-IPCF, Messina (Italy); Tardino, G. [BauArt Basel, Basel (Switzerland); Pontecorvo, L. [Conservatorio di Cosenza – Cosenza Conservatory (Italy); Mannes, D.C. [Paul Scherrer Institut, Villigen (Switzerland); Senesi, R. [Università degli Studi di Roma Tor Vergata (Italy); Consiglio Nazionale delle Ricerche-IPCF, Messina (Italy); Gorini, G. [Università degli Studi di Milano-Bicocca (Italy); Andreani, C. [Università degli Studi di Roma Tor Vergata (Italy); Consiglio Nazionale delle Ricerche-IPCF, Messina (Italy)

2014-10-01

A set of seven musical instruments and two instruments cares from the ‘Fondo Antico della Biblioteca del Sacro Convento’ in Assisi, Italy, were investigated through neutron and X-ray imaging techniques. Historical and scientific interests around ancient musical instruments motivate an intense research effort for their characterization using non-destructive and non-invasive techniques. X-ray and neutron tomography/radiography were applied to the study of composite material samples containing wood, hide and metals. The study was carried out at the NEUTRA beamline, PSI (Paul Scherrer Institute, Switzerland). Results of the measurements provided new information on the composite and multi-scale structure, such as: the internal structure of the samples, position of added materials like metals, wood fiber displays, deformations, presence of adhesives and their spatial distribution and novel insight about construction methods to guide the instruments’ restoration process.

Neutrons and music: Imaging investigation of ancient wind musical instruments

International Nuclear Information System (INIS)

Festa, G.; Tardino, G.; Pontecorvo, L.; Mannes, D.C.; Senesi, R.; Gorini, G.; Andreani, C.

2014-01-01

A set of seven musical instruments and two instruments cares from the ‘Fondo Antico della Biblioteca del Sacro Convento’ in Assisi, Italy, were investigated through neutron and X-ray imaging techniques. Historical and scientific interests around ancient musical instruments motivate an intense research effort for their characterization using non-destructive and non-invasive techniques. X-ray and neutron tomography/radiography were applied to the study of composite material samples containing wood, hide and metals. The study was carried out at the NEUTRA beamline, PSI (Paul Scherrer Institute, Switzerland). Results of the measurements provided new information on the composite and multi-scale structure, such as: the internal structure of the samples, position of added materials like metals, wood fiber displays, deformations, presence of adhesives and their spatial distribution and novel insight about construction methods to guide the instruments’ restoration process

Surgical Assisting

Science.gov (United States)

... instruction, including: Microbiology Pathophysiology Pharmacology Anatomy and physiology Medical terminology Curriculum . Course content includes: Advanced surgical anatomy Surgical microbiology Surgical pharmacology Anesthesia methods and agents Bioscience Ethical ...

Paediatric Abdominal Surgical Emergencies in a General Surgical ...

African Journals Online (AJOL)

... organized for general surgeons undertaking paediatric surgical emergencies. More paediatric surgeons should be trained and more paediatric surgical units should established in the country. Key Words: Paediatric Abdominal Surgical Emergencies; Paediatric Surgeons, General Surgeons. Journal of College of Medicine ...

Toward the Development of Virtual Surgical Tools to Aid Orthopaedic FE Analyses

Directory of Open Access Journals (Sweden)

Srinivas C. Tadepalli

2010-01-01

Full Text Available Computational models of joint anatomy and function provide a means for biomechanists, physicians, and physical therapists to understand the effects of repetitive motion, acute injury, and degenerative diseases. Finite element models, for example, may be used to predict the outcome of a surgical intervention or to improve the design of prosthetic implants. Countless models have been developed over the years to address a myriad of orthopaedic procedures. Unfortunately, few studies have incorporated patient-specific models. Historically, baseline anatomic models have been used due to the demands associated with model development. Moreover, surgical simulations impose additional modeling challenges. Current meshing practices do not readily accommodate the inclusion of implants. Our goal is to develop a suite of tools (virtual instruments and guides which enable surgical procedures to be readily simulated and to facilitate the development of all-hexahedral finite element mesh definitions.

The role of student surgical interest groups and surgical Olympiads in anatomical and surgical undergraduate training in Russia.

Science.gov (United States)

Dydykin, Sergey; Kapitonova, Marina

2015-01-01

Traditional department-based surgical interest groups in Russian medical schools are useful tools for student-based selection of specialty training. They also form a nucleus for initiating research activities among undergraduate students. In Russia, the Departments of Topographical Anatomy and Operative Surgery play an important role in initiating student-led research and providing learners with advanced, practical surgical skills. In tandem with department-led activities, student surgical interest groups prepare learners through surgical competitions, known as "Surgical Olympiads," which have been conducted in many Russian centers on a regular basis since 1988. Surgical Olympiads stimulate student interest in the development of surgical skills before graduation and encourage students to choose surgery as their postgraduate specialty. Many of the participants in these surgical Olympiads have become highly qualified specialists in general surgery, orthopedic surgery, neurosurgery, urology, gynecology, and emergency medicine. The present article emphasizes the role of student interest groups and surgical Olympiads in clinical anatomical and surgical undergraduate training in Russia. © 2015 American Association of Anatomists.

An integrated movement capture and control platform applied towards autonomous movements of surgical robots.

Science.gov (United States)

Daluja, Sachin; Golenberg, Lavie; Cao, Alex; Pandya, Abhilash K; Auner, Gregory W; Klein, Michael D

2009-01-01

Robotic surgery has gradually gained acceptance due to its numerous advantages such as tremor filtration, increased dexterity and motion scaling. There remains, however, a significant scope for improvement, especially in the areas of surgeon-robot interface and autonomous procedures. Previous studies have attempted to identify factors affecting a surgeon's performance in a master-slave robotic system by tracking hand movements. These studies relied on conventional optical or magnetic tracking systems, making their use impracticable in the operating room. This study concentrated on building an intrinsic movement capture platform using microcontroller based hardware wired to a surgical robot. Software was developed to enable tracking and analysis of hand movements while surgical tasks were performed. Movement capture was applied towards automated movements of the robotic instruments. By emulating control signals, recorded surgical movements were replayed by the robot's end-effectors. Though this work uses a surgical robot as the platform, the ideas and concepts put forward are applicable to telerobotic systems in general.

Postsurgical consequences in lower third molar surgical extraction using micromotor and piezosurgery.

Science.gov (United States)

Mistry, Freddy Kersi; Hegde, Nidarsh Diwakar; Hegde, Mithra Nidarsh

2016-01-01

One of the most critical and crucial steps in surgical extraction is cutting the bone or osteotomy, for which many techniques are used, e.g., chisels and mallet, rotary instruments, and ultrasound bone-cutting instruments. If they are not used judiciously, they can be hazardous. To assess the efficiency of piezosurgery unit over micromotor while performing surgical extraction of lower third molars by assessing the time taken for the surgery and measuring postoperative parameters such as pain, trismus, and swelling. Thirty patients having bilateral impacted third molars with the same difficulty index were selected for the study. One side surgical removal was done using micromotor and other side by piezosurgery with an interval of 15 days. After each surgery, time taken to finish was measured and patients were followed up on postoperative days 1, 3, 5, 7, and 15 for assessing pain, trismus, and swelling. Data obtained were statistically analyzed. The mean time taken for the micromotor group is 37.90 min whereas by the piezosurgery group is 54.63 min, showing a statistically significant difference ( P < 0.001). Furthermore, there is statistically significant difference ( P < 0.001) in the level of pain, trismus, and swelling on postoperative days 1, 3, 5, and 7. Even the intragroup comparison of piezosurgical group for trismus and swelling showed no statistically significant difference on postoperative day 7, indicating faster recovery of trismus and swelling. On postoperative day 15, there was no difference in any parameter in both groups indicating complete symptom-free recovery in both groups. It takes more time to perform surgical extraction of third molars when piezosurgical unit is used. Despite that, it causes less pain postoperatively with faster improvement in trismus and quicker reduction in swelling.

Assessment of communication, professionalism, and surgical skills in an objective structured performance-related examination (OSPRE): a psychometric study.

Science.gov (United States)

Ponton-Carss, Alicia; Hutchison, Carol; Violato, Claudio

2011-10-01

The purpose of this study was to investigate the reliability and validity of a performance assessment of communication, professionalism, and surgical skills competencies for surgery residents. Fourteen residents from the general surgery program of the University of Calgary were assessed in 7 surgical simulation stations that included communication and professionalism skills. The internal consistency reliability of the checklists and global rating scales combined was adequate for communication (α = .75-.92) and surgical skills (α = .86-.96), but not for professionalism (α = 0). There was evidence of validity as surgical skills performance improved as a function of postgraduate year level but not for the professionalism checklist. Surgical skills and communication correlated in the 2 stations assessed (r = .55 and .57; P communication skills. Further instrument development is required to assess professionalism in a structured examination context. Copyright © 2011 Elsevier Inc. All rights reserved.

Practice Makes Perfect: Correlations Between Prior Experience in High-level Athletics and Robotic Surgical Performance Do Not Persist After Task Repetition.

Science.gov (United States)

Shee, Kevin; Ghali, Fady M; Hyams, Elias S

Robotic surgical skill development is central to training in urology as well as in other surgical disciplines. Here, we describe a pilot study assessing the relationships between robotic surgery simulator performance and 3 categories of activities, namely, videogames, musical instruments, and athletics. A questionnaire was administered to preclinical medical students for general demographic information and prior experiences in surgery, videogames, musical instruments, and athletics. For follow-up performance studies, we used the Matchboard Level 1 and 2 modules on the da Vinci Skills Simulator, and recorded overall score, time to complete, economy of motion, workspace range, instrument collisions, instruments out of view, and drops. Task 1 was run once, whereas task 2 was run 3 times. All performance studies on the da Vinci Surgical Skills Simulator took place in the Simulation Center at Dartmouth-Hitchcock Medical Center. All participants were medical students at the Geisel School of Medicine. After excluding students with prior hands-on experience in surgery, a total of 30 students completed the study. We found a significant correlation between athletic skill level and performance for both task 1 (p = 0.0002) and task 2 (p = 0.0009). No significant correlations were found for videogame or musical instrument skill level. Students with experience in certain athletics (e.g., volleyball, tennis, and baseball) tended to perform better than students with experience in other athletics (e.g., track and field). For task 2, which was run 3 times, this association did not persist after the third repetition due to significant improvements in students with low-level athletic skill (levels 0-2). Our study suggests that prior experience in high-level athletics, but not videogames or musical instruments, significantly influences surgical proficiency in robot-naive students. Furthermore, our study suggests that practice through task repetition can overcome initial differences

Algorithms for a hand-held miniature x-ray fluorescence analytical instrument

International Nuclear Information System (INIS)

Elam, W.T.; Newman, D.; Ziemba, F.

1998-01-01

The purpose of this joint program was to provide technical assistance with the development of a Miniature X-ray Fluorescence (XRF) Analytical Instrument. This new XRF instrument is designed to overcome the weaknesses of spectrometers commercially available at the present time. Currently available XRF spectrometers (for a complete list see reference 1) convert spectral information to sample composition using the influence coefficients technique or the fundamental parameters method. They require either a standard sample with composition relatively close to the unknown or a detailed knowledge of the sample matrix. They also require a highly-trained operator and the results often depend on the capabilities of the operator. In addition, almost all existing field-portable, hand-held instruments use radioactive sources for excitation. Regulatory limits on such sources restrict them such that they can only provide relatively weak excitation. This limits all current hand-held XRF instruments to poor detection limits and/or long data collection times, in addition to the licensing requirements and disposal problems for radioactive sources. The new XRF instrument was developed jointly by Quantrad Sensor, Inc., the Naval Research Laboratory (NRL), and the Department of Energy (DOE). This report describes the analysis algorithms developed by NRL for the new instrument and the software which embodies them

Ergonomic investigation of weight distribution of laparoscopic instruments.

Science.gov (United States)

Lin, Chiuhsiang Joe; Chen, Hung-Jen; Lo, Ying-Chu

2011-06-01

Laparoscopic surgery procedures require highly specialized visually controlled movements. Investigations of industrial applications indicate that the length as well as the weight of hand-held tools substantially affects movement time (MT). Different weight distributions may have similar effects on long-shafted laparoscopic instruments when performing surgical procedures. For this reason, the current experiment aimed at finding direct evidence of the weight distribution effect in an accurate task. Ten right-handed subjects made continuous Fitts' pointing tasks using a long laparoscopic instrument. The factors and levels were target width: (2.5, 3, 3.5, and 4 cm), target distance (14, 23, and 37 cm), and weight distribution (uniform, front, middle, and rear). Weight distribution was made by chips of lead attached to the laparoscopic instrument. MT, error rate, and throughput (TP) were recorded as dependent variables. There were significant differences between the weight distribution in MT and in TP. The middle position was found to require the least time to manipulate the laparoscopic instrument in pointing tasks and also obtained the highest TP. These analyses and findings pointed to a design direction for the ergonomics and usability of the long hand-held tool such as the laparoscopic instrument in this study. To optimize efficiency in using these tools, the consideration of a better weight design is important and should not be neglected.

Structured assessment of the consequences of composite resection

NARCIS (Netherlands)

Ackerstaff, A. H.; Lindeboom, J. A.; Balm, A. J.; Kroon, F. H.; Tan, I. B.; Hilgers, F. J.

1998-01-01

A structured quality of life questionnaire was developed as an instrument for the assessment of the functional, physical, psychosocial, and counselling problems in patients treated surgically for an oropharyngeal cancer. The questionnaire was tested in a pilot study in a relatively homogeneous group

Benefits of using customized instrumentation in total knee arthroplasty: results from an activity-based costing model.

Science.gov (United States)

Tibesku, Carsten O; Hofer, Pamela; Portegies, Wesley; Ruys, C J M; Fennema, Peter

2013-03-01

The growing demand for total knee arthroplasty (TKA) associated with the efforts to contain healthcare expenditure by advanced economies necessitates the use of economically effective technologies in TKA. The present analysis based on activity-based costing (ABC) model was carried out to estimate the economic value of patient-matched instrumentation (PMI) compared to standard surgical instrumentation in TKA. The costs of the two approaches, PMI and standard instrumentation in TKA, were determined by the use of ABC which measures the cost of a particular procedure by determining the activities involved and adding the cost of each activity. Improvement in productivity due to increased operating room (OR) turn-around times was determined and potential additional revenue to the hospital by the efficient utilization of gained OR time was estimated. Increased efficiency in the usage of OR and utilization of surgical trays were noted with patient-specific approach. Potential revenues to the hospital were estimated with the use of PMI by efficient utilization of time saved in OR. Additional revenues of 78,240 per year were estimated considering utilization of gained OR time to perform surgeries other than TKA. The analysis suggests that use of PMI in TKA is economically effective when compared to standard instrumentation.

A review of psychological assessment instruments for use in bariatric surgery evaluations.

Science.gov (United States)

Marek, Ryan J; Heinberg, Leslie J; Lavery, Megan; Merrell Rish, Julie; Ashton, Kathleen

2016-09-01

Bariatric surgery is a viable treatment option for patients with extreme obesity and associated medical comorbidities; however, optimal surgical outcomes are not universal. Surgical societies, such as the American Society for Metabolic and Bariatric Surgery (ASMBS), recommend that patients undergo a presurgical psychological evaluation that includes reviewing patients' medical charts, conducting a comprehensive clinical interview, and employing some form of objective psychometric testing. Despite numerous societies recommending the inclusion of self-report assessments, only about 2/3 of clinics actively use psychological testing-some of which have limited empirical support to justify their use. This review aims to critically evaluate the psychometric properties of self-report measures when used in bariatric surgery settings and provide recommendations to help guide clinicians in selecting instruments to use in bariatric surgery evaluations. Recommended assessment batteries include use of a broadband instrument along with a narrowband eating measure. Suggestions for self-report measures to include in a presurgical psychological evaluation in bariatric surgery settings are also provided. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Wrong-Site Surgery, Retained Surgical Items, and Surgical Fires : A Systematic Review of Surgical Never Events.

Science.gov (United States)

Hempel, Susanne; Maggard-Gibbons, Melinda; Nguyen, David K; Dawes, Aaron J; Miake-Lye, Isomi; Beroes, Jessica M; Booth, Marika J; Miles, Jeremy N V; Shanman, Roberta; Shekelle, Paul G

2015-08-01

Serious, preventable surgical events, termed never events, continue to occur despite considerable patient safety efforts. To examine the incidence and root causes of and interventions to prevent wrong-site surgery, retained surgical items, and surgical fires in the era after the implementation of the Universal Protocol in 2004. We searched 9 electronic databases for entries from 2004 through June 30, 2014, screened references, and consulted experts. Two independent reviewers identified relevant publications in June 2014. One reviewer used a standardized form to extract data and a second reviewer checked the data. Strength of evidence was established by the review team. Data extraction was completed in January 2015. Incidence of wrong-site surgery, retained surgical items, and surgical fires. We found 138 empirical studies that met our inclusion criteria. Incidence estimates for wrong-site surgery in US settings varied by data source and procedure (median estimate, 0.09 events per 10,000 surgical procedures). The median estimate for retained surgical items was 1.32 events per 10,000 procedures, but estimates varied by item and procedure. The per-procedure surgical fire incidence is unknown. A frequently reported root cause was inadequate communication. Methodologic challenges associated with investigating changes in rare events limit the conclusions of 78 intervention evaluations. Limited evidence supported the Universal Protocol (5 studies), education (4 studies), and team training (4 studies) interventions to prevent wrong-site surgery. Limited evidence exists to prevent retained surgical items by using data-matrix-coded sponge-counting systems (5 pertinent studies). Evidence for preventing surgical fires was insufficient, and intervention effects were not estimable. Current estimates for wrong-site surgery and retained surgical items are 1 event per 100,000 and 1 event per 10,000 procedures, respectively, but the precision is uncertain, and the per

Mechanical and antibacterial properties of a nanocellulose-polypyrrole multilayer composite

Energy Technology Data Exchange (ETDEWEB)

Bideau, Benoit, E-mail: Benoit.bideau@uqtr.ca [Lignocellulosic Material Research Center, Université du Québec à Trois-Rivières, 3351 boul. des Forges, C.P. 500, Trois-Rivières, QC G9A 5H7 (Canada); Bras, Julien, E-mail: Julien.bras@pagora.grenoble-inp.fr [Univ. Grenoble Alpes, LGP2, F-38000 Grenoble (France); CNRS, LGP2, F-38000 Grenoble (France); Saini, Seema, E-mail: Seema.Saini@lgp2.grenoble-inp.fr [Univ. Grenoble Alpes, LGP2, F-38000 Grenoble (France); CNRS, LGP2, F-38000 Grenoble (France); Daneault, Claude, E-mail: Claude.daneault@uqtr.ca [Lignocellulosic Material Research Center, Université du Québec à Trois-Rivières, 3351 boul. des Forges, C.P. 500, Trois-Rivières, QC G9A 5H7 (Canada); Loranger, Eric, E-mail: Eric.Loranger1@uqtr.ca [Lignocellulosic Material Research Center, Université du Québec à Trois-Rivières, 3351 boul. des Forges, C.P. 500, Trois-Rivières, QC G9A 5H7 (Canada)

2016-12-01

In this study, a composite film based on TEMPO-oxidized cellulose nanofibers (TOCN), polyvinyl alcohol (PVA) and polypyrrole (PPy) was synthesized in situ by a chemical polymerization, resulting in the induced absorption of PPy on the surface of the TOCN. The composite films were investigated with scanning electron microscopy, thermogravimetric analysis, contact angle measurements, mechanical tests, and evaluation of antibacterial properties. The developed composite has nearly identical Young modulus (3.4 GPa), elongation (2.6%) and tensile stress (about 51 MPa) to TOCN even if PPy, which as poor properties by itself, was incorporated. From the energy-dispersive X-ray spectroscopy (EDX) results, it was shown that PPy is mainly located on the composite surface. Results confirmed by an increase from 54.5 to 83° in contact angle, an increased heat protection (Thermogravimetric analysis) and a decrease in surface energy. The nanocomposites were also evaluated for antibacterial activity against bacteria occasionally found in food: Gram-positive Bacillus subtilis (B. subtilis) and Gram-negative bacteria Escherichia coli (E. coli). The results indicate that the nanocomposites are effective against all of the bacteria studied as shown by the decrease of 5.2 log colony forming units (CFU) for B. subtilis and 6.5 log CFU for E. coli. Resulting in the total destruction of the studied bacteria. The perfect match between the resulting inhibition zone and the composite surface area has demonstrated that our composite was contact active with a slight leaching of PPy. Our composite was successful as an active packaging on meat (liver) as bacteria were killed by contact, thereby preventing the spread of possible diseases. While it has not been tested on bacteria found in medicine, TOCN/PVA-PPy film may be able to act as an active sterile packaging for surgical instruments. - Highlights: • Good antibacterial activity against Gram-positive and Gram-negative bacteria • High

Prophylactic Antibiotic Choice and Risk of Surgical Site Infection After Hysterectomy.

Science.gov (United States)

Uppal, Shitanshu; Harris, John; Al-Niaimi, Ahmed; Swenson, Carolyn W; Pearlman, Mark D; Reynolds, R Kevin; Kamdar, Neil; Bazzi, Ali; Campbell, Darrell A; Morgan, Daniel M

2016-02-01

To evaluate associations between prophylactic preoperative antibiotic choice and surgical site infection rates after hysterectomy. A retrospective cohort study was performed of patients in the Michigan Surgical Quality Collaborative undergoing hysterectomy from July 2012 to February 2015. The primary outcome was a composite outcome of any surgical site infection (superficial surgical site infections or combined deep organ space surgical site infections). Preoperative antibiotics were categorized based on the recommendations set forth by the American College of Obstetricians and Gynecologists and the Surgical Care Improvement Project. Patients receiving a recommended antibiotic regimen were categorized into those receiving β-lactam antibiotics and those receiving alternatives to β-lactam antibiotics. Patients receiving nonrecommended antibiotics were categorized into those receiving overtreatment (excluded from further analysis) and those receiving nonstandard antibiotics. Multivariable logistic regression models were developed to estimate the independent effect of antibiotic choice. Propensity score matching analysis was performed to validate the results. The study included 21,358 hysterectomies. The overall rate of any surgical site infection was 2.06% (n=441). Unadjusted rates of "any surgical site infection" were 1.8%, 3.1%, and 3.7% for β-lactam, β-lactam alternatives, and nonstandard groups, respectively. After adjusting for patient and operative factors within clusters of hospitals, compared with the β-lactam antibiotics (reference group), the risk of "any surgical site infection" was higher for the group receiving β-lactam alternatives (odds ratio [OR] 1.7, confidence interval [CI] 1.27-2.07) or the nonstandard antibiotics (OR 2.0, CI 1.31-3.1). Compared with women receiving β-lactam antibiotic regimens, there is a higher risk of surgical site infection after hysterectomy among those receiving a recommended β-lactam alternative or nonstandard regimen.

Surgical orthodontics.

Science.gov (United States)

Strohl, Alexis M; Vitkus, Lauren

2017-08-01

The article reviews some commonly used orthodontic treatments as well as new strategies to assist in the correction of malocclusion. Many techniques are used in conjunction with surgical intervention and are a necessary compliment to orthognathic surgery. Basic knowledge of these practices will aid in the surgeon's ability to adequately treat the patient. Many orthodontists and surgeons are eliminating presurgical orthodontics to adopt a strategy of 'surgery first' orthodontics in orthognathic surgery. This has the benefit of immediate improvement in facial aesthetics and shorter treatment times. The advent of virtual surgical planning has helped facilitate the development of this new paradigm by making surgical planning faster and easier. Furthermore, using intraoperative surgical navigation is improving overall precision and outcomes. A variety of surgical and nonsurgical treatments may be employed in the treatment of malocclusion. It is important to be familiar with all options available and tailor the patient's treatment plan accordingly. Surgery-first orthodontics, intraoperative surgical navigation, virtual surgical planning, and 3D printing are evolving new techniques that are producing shorter treatment times and subsequently improving patient satisfaction without sacrificing long-term stability.

Conduction cooled compact laser for chemcam instrument

Science.gov (United States)

Faure, B.; Saccoccio, M.; Maurice, S.; Durand, E.; Derycke, C.

2017-11-01

A new conduction cooled compact laser for Laser Induced Breakdown Spectroscopy (LIBS) on Mars is presented. The laser provides pulses with energy higher than 30mJ at 1μm of wavelength with a good spatial quality. Three development prototypes of this laser have been built and functional and environmental tests have been done. Then, the Qualification and Flight models have been developed and delivered. A spare model is now developed. This laser will be mounted on the ChemCam Instrument of the NASA mission MSL 2009. ChemCam Instrument is developed in collaboration between France (CESR and CNES) and USA (LANL). The goal of this Instrument is to study the chemical composition of Martian rocks. A laser source (subject of this presentation) emits a pulse which is focused by a telescope. It creates a luminous plasma on the rock; the light of this plasma is then analysed by three spectrometers to obtain information on the composition of the rock. The laser source is developed by the French company Thales Laser, with a technical support from CNES and CESR. This development is funded by CNES. The laser is compact, designed to work in burst mode. It doesn't require any active cooling.

Surgical options for lumbosacral fusion: biomechanical stability, advantage, disadvantage and affecting factors in selecting options.

Science.gov (United States)

Yoshihara, Hiroyuki

2014-07-01

Numerous surgical procedures and instrumentation techniques for lumbosacral fusion (LSF) have been developed. This is probably because of its high mechanical demand and unique anatomy. Surgical options include anterior column support (ACS) and posterior stabilization procedures. Biomechanical studies have been performed to verify the stability of those options. The options have their own advantage but also disadvantage aspects. This review article reports the surgical options for lumbosacral fusion, their biomechanical stability, advantages/disadvantages, and affecting factors in option selection. Review of literature. LSF has lots of options both for ACS and posterior stabilization procedures. Combination of posterior stabilization procedures is an option. Furthermore, combinations of ACS and posterior stabilization procedures are other options. It is difficult to make a recommendation or treatment algorithm of LSF from the current literature. However, it is important to know all aspects of the options and decision-making of surgical options for LSF needs to be tailored for each patient, considering factors such as biomechanical stress and osteoporosis.

Work-family conflict and neck and back pain in surgical nurses.

Science.gov (United States)

Baur, Heiner; Grebner, Simone; Blasimann, Angela; Hirschmüller, Anja; Kubosch, Eva Johanna; Elfering, Achim

2018-03-01

Surgical nurses' work is physically and mentally demanding, possibly leading to work-family conflict (WFC). The current study tests WFC to be a risk factor for neck and lower back pain (LBP). Job influence and social support are tested as resources that could buffer the detrimental impact of WFC. Forty-eight surgical nurses from two university hospitals in Germany and Switzerland were recruited. WFC was assessed with the Work-Family Conflict Scale. Job influence and social support were assessed with the Copenhagen Psychosocial Questionnaire, and back pain was assessed with the North American Spine Society Instrument. Multiple linear regression analyses confirmed WFC as a significant predictor of cervical pain (β = 0.45, p Work-life interventions may have the potential to reduce WFC in surgery nurses.

Surgical Tip for Prevention of Lip Injury During Orthognathic and Facial Bone Contouring Surgery.

Science.gov (United States)

Lee, Tae Sung; Park, Sanghoon

2017-10-01

Iatrogenic lip injury is a rather common complication after facial bone surgery, but is usually treated lightly by the surgeon compared with other more severe functional complications. However, these injuries can have permanent sequelae and can therefore be a reason for patient dissatisfaction, especially after cosmetic surgery. Intraoperative lip injuries during facial bone surgery are usually caused by heat-generating surgical instruments or forced traction on the operative fields. The authors have applied a special technical strategy using a hydrocolloid dressing material to avoid these intraoperative lip injuries. This method does not disturb the operative procedure itself, but efficiently prevents lip injuries and decreases surgical morbidities and postoperative swelling.

Estimation and analysis of the sensitivity of monoenergetic electron radiography of composite materials with fluctuating composition

International Nuclear Information System (INIS)

Rudenko, V.N.; Yunda, N.T.

1978-01-01

A sensitivity analysis of the electron defectoscopy method for composite materials with fluctuating composition has been carried out. Quantitative evaluations of the testing sensitivity depending on inspection conditions have been obtained, and calculations of the instrumental error are shown. Based on numerical calculations, a comparison of error has been carried out between high-energy electron and X-ray testings. It is shown that when testing composite materials with a surface density of up to 7-10 g/cm 2 , the advantage of the electron defectoscopy method as compared to the X-ray one is the higher sensitivity and lower instrumental error. The advantage of the electron defectoscopy method over the X-ray one as regards the sensitivity is greater when a light-atom component is predomenant in the composition. A monoenergetic electron beam from a betatron with an energy of up to 30 MeV should be used for testing materials with a surface density of up to 15 g/cm 2

Patient specific instrumentation in total knee arthroplasty: a state of the art

Science.gov (United States)

Mattei, Lorenzo; Pellegrino, Pietro; Bistolfi, Alessandro; Castoldi, Filippo

2016-01-01

Patient specific instrumentation (PSI) is a modern technique in total knee arthroplasty (TKA) aiming to facilitate the implant of the prosthesis. The customized cutting blocks of the PSI are generated from pre-operative three-dimensional model, using computed tomography (CT) or magnetic resonance imaging (MRI). A correct surgical plan is mandatory for a good surgical implant. The PSI guide takes into account any slight deformities or osteophytes and applies preoperative planning for bone resection, using the pre-determined implant size, position, and rotation. The apparent benefits of this technology are that neutral postoperative alignment is more reproducible, surgical time is decreased, and the entire procedure results more efficient and cost-effective. The use of PSI is indicated when advanced osteoarthritis, severe pain, and limited function/walking ability are present, such as in a standard instrumentation TKA. In addition to that, PSI finds its indication when intra-medullary guides cannot be used. For example, when there is a post-traumatic femoral deformity. Large debates have taken place about this topic during the last years and, at the moment, there is no consensus in literature regarding the accuracy and reliability of PSI as many studies have shown controversial and inconsistent results. Literature does not suggest PSI techniques as a gold standard in TKA, and therefore it cannot be recommended as a standard technique in standard, not complicated primary TKA. Moreover, literature does not underline any improvement in components alignment, surgical time, blood loss or functional outcomes. Nevertheless, many patients who underwent TKA suffered a previous trauma. In case of deformities, like femoral or tibial fractures healed with a malalignment, preoperative planning may result difficult, and some intra-operative technical difficulties can occur, such as the use of intra-medullar rod. In these selected cases, PSIs may be very useful to avoid errors in

Radiation burden to personal during surgical and urological reentgenology

Energy Technology Data Exchange (ETDEWEB)

Doubravsky, J; Kukacka, R

1976-01-01

The radiation load was measured in surgical personnel during operation of femoral neck fracture and during instrumental urological roentgenology, using film dosimetry. Here are the conclusions: (1) It is obligatory for medical personnel to use protective lead-rubber aprons during surgical and urological roentgenology. At surgical examinations, where the surgeon stands at the operating table, a short apron, covering the lower half of the body, may suffice. (2) Skiascopy, being the chief source of radiation load, should be reduced to the shortest possible time. (3) When handling the patient or film holder, protective gloves should be worn and the primary radiation beam avoided. (4) Clinical workers should be repeatedly instructed, both in theory and practice, how to work with X radiation sources. (5) In larger clinics with intensive roentgenological services the workers should be rotated; nurses should not be in the reproductive age. For newly established uro-roentgenological examination rooms the regional hygiene officer may issue regulations limiting the number of examinations per day and per person. (6) Non-roentgenologists participating in roentgenological examinations should be provided with dosimeters and included in compulsory preventive periodical examinations in accordance with the regulation ''Mandatory Measures No. 49/1967, Directives Concerning Medical Fitness for Work''.

Virtual reality based surgical assistance and training system for long duration space missions.

Science.gov (United States)

Montgomery, K; Thonier, G; Stephanides, M; Schendel, S

2001-01-01

Access to medical care during long duration space missions is extremely important. Numerous unanticipated medical problems will need to be addressed promptly and efficiently. Although telemedicine provides a convenient tool for remote diagnosis and treatment, it is impractical due to the long delay between data transmission and reception to Earth. While a well-trained surgeon-internist-astronaut would be an essential addition to the crew, the vast number of potential medical problems necessitate instant access to computerized, skill-enhancing and diagnostic tools. A functional prototype of a virtual reality based surgical training and assistance tool was created at our center, using low-power, small, lightweight components that would be easy to transport on a space mission. The system consists of a tracked, head-mounted display, a computer system, and a number of tracked surgical instruments. The software provides a real-time surgical simulation system with integrated monitoring and information retrieval and a voice input/output subsystem. Initial medical content for the system has been created, comprising craniofacial, hand, inner ear, and general anatomy, as well as information on a number of surgical procedures and techniques. One surgical specialty in particular, microsurgery, was provided as a full simulation due to its long training requirements, significant impact on result due to experience, and likelihood for need. However, the system is easily adapted to realistically simulate a large number of other surgical procedures. By providing a general system for surgical simulation and assistance, the astronaut-surgeon can maintain their skills, acquire new specialty skills, and use tools for computer-based surgical planning and assistance to minimize overall crew and mission risk.

Space Infrared Telescope Facility (SIRTF) science instruments

International Nuclear Information System (INIS)

Ramos, R.; Hing, S.M.; Leidich, C.A.; Fazio, G.; Houck, J.R.

1989-01-01

Concepts of scientific instruments designed to perform infrared astronomical tasks such as imaging, photometry, and spectroscopy are discussed as part of the Space Infrared Telescope Facility (SIRTF) project under definition study at NASA/Ames Research Center. The instruments are: the multiband imaging photometer, the infrared array camera, and the infrared spectograph. SIRTF, a cryogenically cooled infrared telescope in the 1-meter range and wavelengths as short as 2.5 microns carrying multiple instruments with high sensitivity and low background performance, provides the capability to carry out basic astronomical investigations such as deep search for very distant protogalaxies, quasi-stellar objects, and missing mass; infrared emission from galaxies; star formation and the interstellar medium; and the composition and structure of the atmospheres of the outer planets in the solar sytem. 8 refs

Lowest instrumented vertebra selection in Lenke 3C and 6C scoliosis

DEFF Research Database (Denmark)

Wang, Yu; Bünger, Cody; Zhang, Yanqun

2012-01-01

PURPOSE: The aim of this study was to investigate whether or not post-op curve behaviour differs due to different choices of lowest instrumented vertebra (LIV) with reference to lumbar apical vertebra (LAV) in Lenke 3C and 6C scoliosis. METHODS: We reviewed all the AIS cases surgically treated...... it can yield similar correction while preserving more lumbar mobility and growth potential....

Evaluation of robotic-assisted platysmaplasty procedures in a cadaveric model using the da Vinci Surgical System.

Science.gov (United States)

Taghizadeh, Farhan; Reiley, Carol; Mohr, Catherine; Paul, Malcolm

2014-03-01

We are evaluating the technical feasibility of robotic-assisted laparoscopic vertical-intermediate platysmaplasty in conjunction with an open rhytidectomy. In a cadaveric study, the da Vinci Surgical System was used to access certain angles in the lower neck that are difficult for traditional short incision, short flap procedures. Ergonomics, approach, and technical challenges were noted. To date, there are no published reports of robotic-assisted neck lifts, motivating us to assess its potential in this field of plastic surgery. Standard open technique short flap rhytidectomies with concurrent experimental robotic-assisted platysmaplasties (neck lifts) were performed on six cadavers with the da Vinci Si Surgical System(®) (Intuitive Surgical, Sunnyvale, CA, USA). The surgical procedures were performed on a diverse cadaver population from June 2011 to January 2012. The procedures included (1) submental incision and laser-assisted liposuction, (2) open rhytidectomy, and (3) robotic-assisted platysmaplasty using knot-free sutures. A variety of sutures and fat extraction techniques, coupled with 0° and 30° three-dimensional endoscopes, were utilized to optimize visualization of the platysma. An unaltered da Vinci Si Surgical System with currently available instruments was easily adaptable to neck lift surgery. Mid-neck platysma exposure was excellent, tissue handling was delicate and precise, and suturing was easily performed. Robotic-assisted surgery has the potential to improve outcomes in neck lifts by offering the ability to manipulate instruments with increased freedom of movement, scaled motion, tremor reduction, and stereoscopic three-dimensional visualization in the deep neck. Future clinical studies on live human patients can better assess subject and surgeon benefits arising from the use of the da Vinci system for neck lifts. Evidence obtained from multiple time series with or without the intervention, such as case studies. Dramatic results in

Micro-surgical endodontics.

Science.gov (United States)

Eliyas, S; Vere, J; Ali, Z; Harris, I

2014-02-01

Non-surgical endodontic retreatment is the treatment of choice for endodontically treated teeth with recurrent or residual disease in the majority of cases. In some cases, surgical endodontic treatment is indicated. Successful micro-surgical endodontic treatment depends on the accuracy of diagnosis, appropriate case selection, the quality of the surgical skills, and the application of the most appropriate haemostatic agents and biomaterials. This article describes the armamentarium and technical procedures involved in performing micro-surgical endodontics to a high standard.

Automatic classification of minimally invasive instruments based on endoscopic image sequences

Science.gov (United States)

Speidel, Stefanie; Benzko, Julia; Krappe, Sebastian; Sudra, Gunther; Azad, Pedram; Müller-Stich, Beat Peter; Gutt, Carsten; Dillmann, Rüdiger

2009-02-01

Minimally invasive surgery is nowadays a frequently applied technique and can be regarded as a major breakthrough in surgery. The surgeon has to adopt special operation-techniques and deal with difficulties like the complex hand-eye coordination and restricted mobility. To alleviate these constraints we propose to enhance the surgeon's capabilities by providing a context-aware assistance using augmented reality techniques. To analyze the current situation for context-aware assistance, we need intraoperatively gained sensor data and a model of the intervention. A situation consists of information about the performed activity, the used instruments, the surgical objects, the anatomical structures and defines the state of an intervention for a given moment in time. The endoscopic images provide a rich source of information which can be used for an image-based analysis. Different visual cues are observed in order to perform an image-based analysis with the objective to gain as much information as possible about the current situation. An important visual cue is the automatic recognition of the instruments which appear in the scene. In this paper we present the classification of minimally invasive instruments using the endoscopic images. The instruments are not modified by markers. The system segments the instruments in the current image and recognizes the instrument type based on three-dimensional instrument models.

Investigation of incidence and risk factors for surgical glove perforation in small animal surgery.

Science.gov (United States)

Hayes, Galina M; Reynolds, Deborah; Moens, Noel M M; Singh, Ameet; Oblak, Michelle; Gibson, Thomas W G; Brisson, Brigitte A; Nazarali, Alim; Dewey, Cate

2014-05-01

To identify incidence and risk factors for surgical glove perforation in small animal surgery. Observational cohort study. Surgical gloves (n = 2132) worn in 363 surgical procedures. All gloves worn by operative personnel were assessed for perforation at end-procedure using a water leak test. Putative risk factors were recorded by a surgical team member. Associations between risk factors and perforation were assessed using multivariable multi-level random-effects logistic regression models to control for hierarchical data structure. At least 1 glove perforation occurred in 26.2% of procedures. Identified risk factors for glove perforation included increased surgical duration (surgery >1 hour OR = 1.79, 95% CI = 1.12-2.86), performing orthopedic procedures (OR = 1.88; 95% CI = 1.23-2.88), any procedure using powered instruments (OR = 1.93; 95% CI = 1.21-3.09) or surgical wire (OR = 3.02; 95% CI = 1.50-6.05), use of polyisoprene as a glove material (OR = 1.59, 95% CI = 1.05-2.39), and operative role as primary surgeon (OR = 2.01; 95% CI = 1.35-2.98). The ability of the wearer to detect perforations intraoperatively was poor, with a sensitivity of 30.8%. There is a high incidence of unrecognized glove perforations in small animal surgery. © Copyright 2014 by The American College of Veterinary Surgeons.

Essential fatty acid deficiency in surgical patients.

Science.gov (United States)

O'Neill, J A; Caldwell, M D; Meng, H C

1977-01-01

Parenteral nutrition may protect patients unable to eat from malnutrition almost indefinitely. If fat is not also given EFAD will occur. This outlines a prospective study of 28 surgical patients on total intravenous fat-free nutrition to determine the developmental course of EFAD and the response to therapy. Twenty-eight patients ranging from newborn to 66 years receiving parenteral nutrition without fat had regular determinations of the composition of total plasma fatty acids and the triene/tetraene ratio using gas liquid chromatography. Physical signs of EFAD were looked for also. Patients found to have evidence of EFAD were treated with 10% Intralipid. Topical safflower oil was used in three infants. Total plasma fatty acid composition was restudied following therapy. In general, infants on fat-free intravenous nutrition developed biochemical EFAD within two weeks, but dermatitis took longer to become evident. Older individuals took over four weeks to develop a diagnostic triene/tetraene ratio (greater than 0.4; range 0.4 to 3.75). Therapeutic correction of biochemical EFAD took 7 to 10 days but dermatitis took longer to correct. Cutaneous application of safflower oil alleviated the cutaneous manifestations but did not correct the triene/tetraene ratio of total plasma fatty acids. These studies indicate that surgical patients who are unable to eat for two to four weeks, depending upon age and expected fat stores, should receive fat as a part of their intravenous regimen. Images Fig. 7. PMID:404973

Cost-effectiveness of decompression according to Gill versus instrumented spondylodesis in the treatment of sciatica due to low grade spondylolytic spondylolisthesis: A prospective randomised controlled trial [NTR1300

NARCIS (Netherlands)

M.P. Arts (Mark); M.J.T. Verstegen (Marco); R. Brand (René); B.W. Koes (Bart); M.E. van den Akker-van Marle (Elske); W.C. Peul (Wilco)

2008-01-01

textabstractBackground. Nerve root decompression with instrumented spondylodesis is the most frequently performed surgical procedure in the treatment of patients with symptomatic low-grade spondylolytic spondylolisthesis. Nerve root decompression without instrumented fusion, i.e. Gill's procedure,

Morphologic and biochemical changes in male rat lung after surgical and pharmacological castration

Directory of Open Access Journals (Sweden)

M.S. Ojeda

2000-03-01

Full Text Available The morphology of the rat lung was studied by light microscopy in different situations: after surgical and pharmacological castration and after administration of testosterone to the castrated rat to determine if the androgen is required to maintain the normal morphology of the lung. We also determined the effect of flutamide on the phospholipid composition of both the surfactant and microsomes of the lung. Rats were separated into five groups: I - control non-castrated rats, II - castrated rats sacrificed 21 days after castration, III - castrated rats that received testosterone daily from day 2 to day 21 after castration, IV - castrated rats that received testosterone from day 15 to day 21 after castration, and V - control rats injected with flutamide for 7 days. The amount of different phospholipids in the surfactant and microsomes of the lung was measured in group I and V rats. At the light microscopy level, the surgical and pharmacological castration provoked alterations in the morphology of the lung, similar to that observed in human lung emphysema. The compositions of surfactant and microsomes of the lung were similar to those previously reported by us for the surgically castrated rats. These results indicate that androgens are necessary for the normal morphology as well as for some metabolic aspects of the lung.

The design of a simple radon-detecting instrument based on MCU

International Nuclear Information System (INIS)

Du Genyuan; Qiu Yingyu; Zhang Jiang

2007-01-01

Introduction are given on the internal composition of the radon-detecting instrument based on MCU and the working of the real electric circuit. The single-chip microcomputer P89C58 of PHILIPS is adopted as the micro-controller of the instrument, realizing such functions as counting input pulses within fixed time, data processing, liquid crystal display, keyboard interface, serial communication, etc. The instrument turns out to be low in work consumption, with relatively high degree of concentration and computerization, and is recommended for field operations. (authors)

The design of a simple radon-detecting instrument based on MCU

International Nuclear Information System (INIS)

Du Genyuan; Chen Jianjun; Zhang Jiang

2008-01-01

Introduction are given on the internal composition of the radon-detecting instrument based on MCU and the working of the real electric circuit. The single-chip microcomputer P89C58 of PHILIPS is adopted as the micro-controller of the instrument, realizing such functions as counting input pulses within fixed time, data processing, liquid crystal display, keyboard interface, serial communication, etc. The instrument turns out to be low in work consumption, with relatively high degree of concentration and computerization, and is recommended for field operations. (authors)

Epithermal neutron instrumentation at ISIS

International Nuclear Information System (INIS)

Gorini, G; Festa, G; Andreani, C

2014-01-01

The advent of pulsed neutron sources makes available high epithermal neutron fluxes (in the energy range between 500 meV and 100 eV). New dedicated instrumentation, such as Resonance Detectors, was developed at ISIS spallation neutron source in the last years to apply the specific properties of this kind of neutron beam to the study of condensed matter. New detection strategies like Filter Difference method and Foil Cycling Technique were also developed in parallel to the detector improvement at the VESUVIO beamline. Recently, epithermal neutron beams were also used at the INES beamline to study elemental and isotopic composition of materials, with special application to cultural heritage studies. In this paper we review a series of epithermal neutron instrumentation developed at ISIS, their evolution over time and main results obtained

Computer Music Synthesis and Composition

Science.gov (United States)

Ayers, Lydia

What is computer music composition? Composers are using the computer for everything from MIDI instruments communicating with computer sequencers, pitch trackers analyzing the sounds of acoustic instruments and converting them to pitch information, live performers with recorded music, performers with interactive computer programs, computer music produced by dancers using sensors, automatic music composition with the computer programs composing the music, composing with sounds or parts of sounds rather than notes, how to structure the use of time, composing with timbres, or the colors of sounds, and timbre morphing, such as a gong morphing to a voice, composing with textures and texture morphing, such as fluttertonguing morphing to pitch, granular synthesis, trills and convolution.

[Effect of a multifunctional instrument (HF scissors) in parotis surgery].

Science.gov (United States)

Strauss, G; Schaller, S; Gollnick, I

2014-03-01

Lateral parotidectomy is a demanding surgical procedure and requires a large number of instruments with a high frequency (HF) of alternating. Many functions, such as preparing, spreading, coagulating and cutting could be combined by using scissors with an integrated function of bipolar coagulation. This study has targeted an investigation of technical application, influence on surgery time, frequency of HF application and change of instruments. In the period between 01 April 2011 and 30 September 2012 (18 months) 35 procedures of lateral parotidectomy in 35 patients were investigated. In all cases lateral parotidectomy was carried out with a similar technique (modified extracapsular preparation). Workflow data were used from a control group in the period between 01 January 2009 and 31 December 2010 (24 months). The following parameters from both groups were documented and evaluated: incision-suture times (subdivided into nine sections of the procedure), change of instruments, period of application for HF function and early facial nerve function (6 h and 6 days after surgery according to House-Brackmann). Additionally, in the HF+ group a questionnaire that facilitated subjective evaluation of instruments was analyzed. It was possible to perform the surgery in both groups with neither technical nor surgical intraoperative complications. Incision-suture times showed an average reduction of 31.6 min (34.8 %) in the HF+ group. There was a reduction in the change of instruments compared to a conventional group (CONV) by up to 62.7 %. With the deployment of HF scissors there was a clear increase in the use of HF surgery by more than 100 % when comparing incision-suture times. Evaluation of both groups according to House-Brackmann showed a similar postoperative facial nerve function. The surgeons involved were of the opinion that in all 35 surgeries with HF scissors the intervention was easier and more comfortable. The use of HF scissors is appropriate for parotid gland

Virtual Instrumentation in Biomedical Equipment

Directory of Open Access Journals (Sweden)

Tiago Faustino Andrade

2013-01-01

Full Text Available Nowadays, the assessment of body composition by estimating the percentage of body fat has a great impact in many fields such as nutrition, health, sports, chronic diseases and others. The main purpose for this work is the development of a virtual instrument that permits more effective assessment of body fat, automatic data processing, recording results and storage in a database, with high potential to conduct new studies, http://lipotool.com.

Mobile surgical skills education unit: a new concept in surgical training.

Science.gov (United States)

Shaikh, Faisal M; Hseino, Hazem; Hill, Arnold D K; Kavanagh, Eamon; Traynor, Oscar

2011-08-01

Basic surgical skills are an integral part of surgical training. Simulation-based surgical training offers an opportunity both to trainees and trainers to learn and teach surgical skills outside the operating room in a nonpatient, nonstressed environment. However, widespread adoption of simulation technology especially in medical education is prohibited by its inherent higher cost, limited space, and interruptions to clinical duties. Mobile skills laboratory has been proposed as a means to address some of these limitations. A new program is designed by the Royal College of Surgeons in Ireland (RCSI), in an approach to teach its postgraduate basic surgical trainees the necessary surgical skills, by making the use of mobile innovative simulation technology in their own hospital settings. In this article, authors describe the program and students response to the mobile surgical skills being delivered in the region of their training hospitals and by their own regional consultant trainers.

“Climb!” – A Composition Case Study. Actualising and Replicating Virtual Spaces in Classical Music Composition and Performance

DEFF Research Database (Denmark)

Kallionpaa, Maria; Gasselseder, Hans-Peter

2018-01-01

, for example, the acoustics of the concert hall, the instrumentation, the qualities of the concert instrument, or the technologies used. Today´s electroacoustic repertoires frequently contain manipulation of (either physical or virtual) space or acoustic qualities, which sets new requirements...... to the capabilities of the performers. This leads to a question what these requirements may be and how can the performers and composers best deal with them? Can the space itself form part of the structure of a composition and/or performance? This chapter explores the topic through a composition case study “Climb...

Instrument employing a charge flow transistor

International Nuclear Information System (INIS)

1981-01-01

The invention concerns instruments employing charge-flow transistors that operate to sense a property in the surrounding environment. It is based on a particular sensor principle, thin-film conduction. The instruments described include a charge-flow transistor with semiconductor substrate, a source region, a drain region, a gate insulator, and a gapped electrode structure with a thin-film sensor material in the gap. The sensor material has an electrical conductance that is sensitive to a property of the ambient environment and has a surface conductance that differs substantially from its bulk conductance. The main object is to provide a low-cost instrument for early-warning fire-detection devices: in this case the property detected would be the products of combustion. Other properties that can be sensed include gases or vapors, free radicals, vapor electromagnetic radiation, subatomic particles, atomic or molecular beams, changes in ambient pressure or temperature, the chemical composition and the electrochemical potential of a solution. (U.K.)

Instrument employing a charge flow transistor

Energy Technology Data Exchange (ETDEWEB)

1981-03-11

The invention concerns instruments employing charge-flow transistors that operate to sense a property in the surrounding environment. It is based on a particular sensor principle, thin-film conduction. The instruments described include a charge-flow transistor with semiconductor substrate, a source region, a drain region, a gate insulator, and a gapped electrode structure with a thin-film sensor material in the gap. The sensor material has an electrical conductance that is sensitive to a property of the ambient environment and has a surface conductance that differs substantially from its bulk conductance. The main object is to provide a low-cost instrument for early-warning fire-detection devices: in this case the property detected would be the products of combustion. Other properties that can be sensed include gases or vapors, free radicals, vapor electromagnetic radiation, subatomic particles, atomic or molecular beams, changes in ambient pressure or temperature, the chemical composition and the electrochemical potential of a solution.

The bilateral bispectral and the composite variability indexes during anesthesia for unilateral surgical procedure

Directory of Open Access Journals (Sweden)

Pedro Lopes-Pimentel

2017-01-01

Conclusions: Our results indicate that the large interindividual variability of BIS and CVI limits their usefulness. We found differences between the left and right measurements in a right-handed series of patients during surgical stimuli though they were not clinically relevant.

Still under the microscope: can a surgical aptitude test predict otolaryngology resident performance?

Science.gov (United States)

Moore, Eric J; Price, Daniel L; Van Abel, Kathryn M; Carlson, Matthew L

2015-02-01

Application to otolaryngology-head and neck surgery residency is highly competitive, and the interview process strives to select qualified applicants with a high aptitude for the specialty. Commonly employed criteria for applicant selection have failed to show correlation with proficiency during residency training. We evaluate the correlation between the results of a surgical aptitude test administered to otolaryngology resident applicants and their performance during residency. Retrospective study at an academic otolaryngology-head and neck surgery residency program. Between 2007 and 2013, 224 resident applicants participated in a previously described surgical aptitude test administered at a microvascular surgical station. The composite score and attitudinal scores for 24 consecutive residents who matched at our institution were recorded, and their residency performance was analyzed by faculty survey on a five-point scale. The composite and attitudinal scores were analyzed for correlation with residency performance score by regression analysis. Twenty-four residents were evaluated for overall quality as a clinician by eight faculty members who were blinded to the results of surgical aptitude testing. The results of these surveys showed good inter-rater reliability. Both the overall aptitude test scores and the subset attitudinal score showed reliability in predicting performance during residency training. The goal of the residency selection process is to evaluate the candidate's potential for success in residency and beyond. The results of this study suggest that a simple-to-administer clinical skills test may have predictive value for success in residency and clinician quality. 4. © 2014 The American Laryngological, Rhinological and Otological Society, Inc.

Longitudinal Evaluation of the Integration of Digital Musical Instruments into Existing Compositional Work Processes

DEFF Research Database (Denmark)

Gelineck, Steven; Serafin, Stefania

2012-01-01

This paper explores a longitudinal approach to the qualitative evaluation of a set of digital musical instruments, which were developed with a focus on creativity and exploration. The instruments were lent to three electronic musicians/composers for a duration of four weeks. Free exploration...

Evaluation of the effect of cognitive therapy on perioperative anxiety and depression among Nigerian surgical patients.

Science.gov (United States)

Osinowo, H O; Olley, B O; Adejumo, A O

2003-12-01

Surgical paients have been known to benefit immensely from psychological interventions. This study set out to assess the pre and postoperative anxiety levels and depression and the effect of cognitive therapy among Nigerian surgical patients. The effects of gender and educational status on perioperative anxiety and depression were also evaluated. The study utilized a controlled outcome design to evaluate the efficacy of self-instructional training (SIT) and rational emotive therapy (RET) in surgical patients. Preoperative anxiety and depression scores were used as co-variants. Thirty-three (33) elective surgical patients were sampled randomly, divided into 3 groups of eleven (11) patients each. Eight (8) subjects underwent gynaecological procedures while the remaining 25 subjects had general surgical procedures. The mean age was 32.72 +/- 15.83 years (range = 17-16 years.) The major instruments used in the study were the State Anxiety Subscale of the Speilberger State Trait Anxiety Inventory (STAI) and Hospital Anxiety and Depression Inventory. SIT had the potential to reduce anxiety level among subjects postoperatively (t = 2.06; df = 10; p < 0.05). The use of RET reduced depression among surgical patients (t = 1.23; df = 10; p < 0.05). It was concluded that surgical patients manifest varying degrees of anxiety preoperatively and postoperatively. Patient's pre and postoperative anxiety and depression can be reduced by the introduction of SIT and RET.

Port positioning and docking for single-stage totally robotic dissection for rectal cancer surgery with the Si and Xi Da Vinci Surgical System.

Science.gov (United States)

Toh, James Wei Tatt; Kim, Seon-Hahn

2017-11-04

We have previously reported our technique of single-docking totally robotic dissection for rectal cancer surgery using the Da Vinci ® Si Surgical System in 2009. However, we have since optimised our port placement for the Si system and have developed a novel configuration of port placement and docking for the Da Vinci ® Xi Surgical System. We have performed over 700 cases using this technique with the Si system and have used our Xi technique since 2016 for totally robotic dissection for rectal cancer. We have kept the configuration of port placements for both the Xi and Si system as similar as possible, with the priorities to avoid arm collisions as well as to provide a workable port configuration of two left-handed instruments and one right-handed instrument. To date, there have had no major complications or arm collisions related to this technique of docking, port positioning and instrument placement.

Health hazards of child labor in the leather products and surgical instrument manufacturing industries of Sialkot, Pakistan

International Nuclear Information System (INIS)

Junaid, Muhammad; Malik, Riffat Naseem; Pei, De-Sheng

2017-01-01

Child labor is a major challenge in the developing countries and comprehensive health hazard identification studies on this issue are still lacking. Therefore, the current study is an effort to highlight the health concerns of child labor exposed in the key small scale industries of Sialkot, Pakistan. Our findings revealed jolting levels of heavy metals in the urine, blood, serum, saliva, and hair samples collected from the exposed children. For example, in the urine samples, Cd, Cr, Ni, and Pb were measured at the respective concentrations of 39.17, 62.02, 11.94 and 10.53 μg/L in the surgical industries, and 2.10, 4.41, 1.04 and 5.35 μg/L in the leather industries. In addition, source apportionment revealed polishing, cutting, and welding sections in the surgical industries and surface coating, crusting, and stitching sections in the leather industries were the highest contributors of heavy metals in the bio-matrices of the exposed children, implying the dusty, unhygienic, and unhealthy indoor working conditions. Further, among all the bio-matrices, the hair samples expressed the highest bioaccumulation factor for heavy metals. In accordance with the heavy metal levels reported in the exposed children, higher oxidative stress was found in the children working in the surgical industries than those from the leather industries. Moreover, among heavy metals’ exposure pathways, inhalation of industrial dust was identified as the primary route of exposure followed by the ingestion and dermal contact. Consequently, chemical daily intake (CDI), carcinogenic and non-carcinogenic hazard quotients (HQs) of heavy metals were also reported higher in the exposed children and were also alarmingly higher than the corresponding US EPA threshold limits. Taken all together, children were facing serious health implications in these industries and need immediate protective measures to remediate the current situation. - Highlights: • Children occupational exposure assessment

METHODOLOGICAL PRINCIPLES OF FORMING REPERTOIRE OF STUDENTS’ FOLK INSTRUMENTAL ORCHESTRA

Directory of Open Access Journals (Sweden)

Mykola Pshenychnykh

2016-11-01

Full Text Available One of the main aspects of forming future music teachers’ professional competence, connected with mastering professional musical and performing skills in the course “Orchestra Class” and realized in the activity of students’ performing group, is revealed. Nowadays the problem of creative personality development is relevant, as creative future music art teachers freely orient themselves and guide pupils students in today's cultural environment, music and media space, have a strong musical taste and aesthetic guidelines. The music genre groups have been characterized in the article. It is thought that these groups are the traditional components of repertoire of folk and orchestra student groups: arrangements of folk tunes; works of Ukrainian and world classics, orchestrated for the folk groups, taking into account each orchestra performing possibilities; works by contemporary authors, written specifically for the orchestra of folk instruments. The main methodological principles of selecting the repertoire for the student orchestra of folk instruments are disclosed, including: technical, artistic and performing capabilities of student groups; involvement of works of different genres into the repertoire; correspondence of orchestra scores to instrumental composition of the student orchestra, and their correction if it is necessary; selecting works, whose performing arouses interest of the student audience; using the experience of the leading professional ensembles of folk instruments; constant updating the orchestra's repertoire. In the conclusion the author emphasizes that taking into account the methodological tips helps solve the main tasks within the course of “Orchestra Class”. These tips are the following: students’ acquaintance with the history of foundation, composition, ways of musicianship, technique of playing the instrument of folk instrument orchestra and acquaintance with specific orchestral music; development of all

Solo surgeon single-port laparoscopic surgery with a homemade laparoscope-anchored instrument system in benign gynecologic diseases.

Science.gov (United States)

Yang, Yun Seok; Kim, Seung Hyun; Jin, Chan Hee; Oh, Kwoan Young; Hur, Myung Haeng; Kim, Soo Young; Yim, Hyun Soon

2014-01-01

The objective of this study was to present the initial operative experience of solo surgeon single-port laparoscopic surgery (SPLS) in the laparoscopic treatment of benign gynecologic diseases and to investigate its feasibility and surgical outcomes. Using a novel homemade laparoscope-anchored instrument system that consisted of a laparoscopic instrument attached to a laparoscope and a glove-wound retractor umbilical port, we performed solo surgeon SPLS in 13 patients between March 2011 and June 2012. Intraoperative complications and postoperative surgical outcomes were determined. The primary operative procedures performed were unilateral salpingo-oophorectomy (n = 5), unilateral salpingectomy (n = 2), adhesiolysis (n = 1), and laparoscopically assisted vaginal hysterectomy (n = 5). Additional surgical procedures included additional adhesiolysis (n = 4) and ovarian drilling (n = 1).The primary indications for surgery were benign ovarian tumors (n = 5), ectopic pregnancy (n = 2), pelvic adhesion (infertility) (n = 1), and benign uterine tumors (n = 5). Solo surgeon SPLS was successfully accomplished in all procedures without a laparoscopic assistant. There were no intraoperative or postoperative complications. Our laparoscope-anchored instrument system obviates the need for an additional laparoscopic assistant and enables SPLS to be performed by a solo surgeon. The findings show that with our system, solo surgeon SPLS is a feasible and safe alternative technique for the treatment of benign gynecologic diseases in properly selected patients. Copyright © 2014 AAGL. Published by Elsevier Inc. All rights reserved.

The interplay between nutrition and body composition

African Journals Online (AJOL)

or radiation treatment for cancer.3.4 The loss of body tissue may be .... adjacent to areas of damage or surgical injury should give valuable .... The composition of weight loss caused by chronic ... pancreatitis (E) (N = 6); burns IF) (N = 4).

Can Reliability of Multiple Component Measuring Instruments Depend on Response Option Presentation Mode?

Science.gov (United States)

Menold, Natalja; Raykov, Tenko

2016-01-01

This article examines the possible dependency of composite reliability on presentation format of the elements of a multi-item measuring instrument. Using empirical data and a recent method for interval estimation of group differences in reliability, we demonstrate that the reliability of an instrument need not be the same when polarity of the…

Health hazards of child labor in the leather products and surgical instrument manufacturing industries of Sialkot, Pakistan.

Science.gov (United States)

Junaid, Muhammad; Malik, Riffat Naseem; Pei, De-Sheng

2017-07-01

Child labor is a major challenge in the developing countries and comprehensive health hazard identification studies on this issue are still lacking. Therefore, the current study is an effort to highlight the health concerns of child labor exposed in the key small scale industries of Sialkot, Pakistan. Our findings revealed jolting levels of heavy metals in the urine, blood, serum, saliva, and hair samples collected from the exposed children. For example, in the urine samples, Cd, Cr, Ni, and Pb were measured at the respective concentrations of 39.17, 62.02, 11.94 and 10.53 μg/L in the surgical industries, and 2.10, 4.41, 1.04 and 5.35 μg/L in the leather industries. In addition, source apportionment revealed polishing, cutting, and welding sections in the surgical industries and surface coating, crusting, and stitching sections in the leather industries were the highest contributors of heavy metals in the bio-matrices of the exposed children, implying the dusty, unhygienic, and unhealthy indoor working conditions. Further, among all the bio-matrices, the hair samples expressed the highest bioaccumulation factor for heavy metals. In accordance with the heavy metal levels reported in the exposed children, higher oxidative stress was found in the children working in the surgical industries than those from the leather industries. Moreover, among heavy metals' exposure pathways, inhalation of industrial dust was identified as the primary route of exposure followed by the ingestion and dermal contact. Consequently, chemical daily intake (CDI), carcinogenic and non-carcinogenic hazard quotients (HQs) of heavy metals were also reported higher in the exposed children and were also alarmingly higher than the corresponding US EPA threshold limits. Taken all together, children were facing serious health implications in these industries and need immediate protective measures to remediate the current situation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Open surgical simulation--a review.

Science.gov (United States)

Davies, Jennifer; Khatib, Manaf; Bello, Fernando

2013-01-01

Surgical simulation has benefited from a surge in interest over the last decade as a result of the increasing need for a change in the traditional apprentice model of teaching surgery. However, despite the recent interest in surgical simulation as an adjunct to surgical training, most of the literature focuses on laparoscopic, endovascular, and endoscopic surgical simulation with very few studies scrutinizing open surgical simulation and its benefit to surgical trainees. The aim of this review is to summarize the current standard of available open surgical simulators and to review the literature on the benefits of open surgical simulation. Open surgical simulators currently used include live animals, cadavers, bench models, virtual reality, and software-based computer simulators. In the current literature, there are 18 different studies (including 6 randomized controlled trials and 12 cohort studies) investigating the efficacy of open surgical simulation using live animal, bench, and cadaveric models in many surgical specialties including general, cardiac, trauma, vascular, urologic, and gynecologic surgery. The current open surgical simulation studies show, in general, a significant benefit of open surgical simulation in developing the surgical skills of surgical trainees. However, these studies have their limitations including a low number of participants, variable assessment standards, and a focus on short-term results often with no follow-up assessment. The skills needed for open surgical procedures are the essential basis that a surgical trainee needs to grasp before attempting more technical procedures such as laparoscopic procedures. In this current climate of medical practice with reduced hours of surgical exposure for trainees and where the patient's safety and outcome is key, open surgical simulation is a promising adjunct to modern surgical training, filling the void between surgeons being trained in a technique and a surgeon achieving fluency in that

Polymerization stress evolution of a bulk-fill flowable composite under different compliances.

Science.gov (United States)

Guo, Yongwen; Landis, Forrest A; Wang, Zhengzhi; Bai, Ding; Jiang, Li; Chiang, Martin Y M

2016-04-01

To use a compliance-variable instrument to simultaneously measure and compare the polymerization stress (PS) evolution, degree of conversion (DC), and exotherm of a bulk-fill flowable composite to a packable composite. A bulk-fill flowable composite (Filtek Bulk-fill, FBF) and a conventional packable composite (Filtek Z250, Z250) purchased from 3M ESPE were investigated. The composites were studied using a cantilever-beam based instrument equipped with an in situ near infrared (NIR) spectrometer and a microprobe thermocouple. The measurements were carried out under various instrumental compliances (ranging from 0.3327μm/N to 12.3215μm/N) that are comparable to the compliances of clinically prepared tooth cavities. Correlations between the PS and temperature change as well as the DC were interpreted. The maximum PS of both composites at 10min after irradiation decreased with the increase in the compliance of the cantilever beam. The FBF composite generated a lower final stress than the Z250 sample under instrumental compliances less than ca. 4μm/N; however, both materials generated statistically similar PS values at higher compliances. The reaction exotherm and the DC of both materials were found to be independent of compliance. The DC of the FBF sample was slightly higher than that of the packable Z250 composite while the peak exotherm of FBF was almost double that of the Z250 composite. For FBF, a characteristic drop in the PS was observed during the early stage of polymerization for all compliances studied which was not observed in the Z250 sample. This drop was shown to relate to the greater exotherm of the less-filled FBF sample relative to the Z250 composite. While the composites with lower filler content (low viscosity) are generally considered to have lower PS than the conventional packable composites, a bulk-fill flowable composite was shown to produce lower PS under a lower compliance of constraint as would be experienced if the composite was used as

Anxiety in veterinary surgical students

DEFF Research Database (Denmark)

Langebæk, Rikke; Eika, Berit; Jensen, Asger Lundorff

2012-01-01

The surgical educational environment is potentially stressful and this can negatively affect students' learning. The aim of this study was to investigate whether veterinary students' level of anxiety is higher in a surgical course than in a non-surgical course and if pre-surgical training...... in a Surgical Skills Lab (SSL) has an anxiety reducing effect. Investigations were carried out as a comparative study and a parallel group study. Potential participants were fourth-year veterinary students who attended a surgical course (Basic Surgical Skills) and a non-surgical course (Clinical Examination...... and 28 students from 2010). Our results show that anxiety levels in veterinary students are significantly higher in a surgical course than in a non-surgical course (p...

[Repair of fingertip amputations using composite grafts: nine clinical cases].

Science.gov (United States)

Al Saflan, A; May, P; Revol, M; Servant, J-M

2010-08-01

Even if a digital replantation is not possible, we present a series of nine cases of fingertip amputations treated with clinical efficacy by using a composite graft from the amputated finger part. All of our eight patients (four children and four adults) were traumatically amputated. The level of amputation passed by the bunch of P3 and carried partially or completely the ungula. The reposition was always performed under local anaesthesia. Our evaluation related on the survival of the composite grafts, the functional and the aesthetic result. The composite grafts were revascularised in eight amputations out of nine, with a satisfactory remote result on the function as well as aesthetic level. After a short recall of the alternative surgical methods of the treatment of the fingertip amputations, we will insist on the simplicity and the reliability of the repositioning of a composite graft, recommended for us from the start and depending on the traumatic level. In the event of a failure, surgeons still have the possibility of realising the other alternative surgical methods. 2009. Published by Elsevier SAS.

The Virtual Surgical Pelvis : Anatomy Visualization for Education and Surgical Planning

NARCIS (Netherlands)

Smit, N.N.

2016-01-01

This thesis deals with visualizing anatomical data for medical education and surgical planning purposes. To this end, we have developed a detailed virtual atlas, the Virtual Surgical Pelvis (VSP),which unifies surgically relevant knowledge on pelvic anatomy. We provide methods to share the knowledge

Simple Tools for Surgeons : Design and Evaluation of mechanical alternatives for robotic instruments for Minimally Invasive Surgery

NARCIS (Netherlands)

Jaspers, J.E.N.

2006-01-01

Performing complex tasks in Minimally Invasive Surgery (MIS) is demanding due to a disturbed hand-eye co-ordination, the application of non-ergonomic instruments with limited number of degrees of freedom (DOFs) and the two-dimensional (2D) view controlled by the surgical assistance. Robotic camera

Deriving DICOM surgical extensions from surgical workflows

Science.gov (United States)

Burgert, O.; Neumuth, T.; Gessat, M.; Jacobs, S.; Lemke, H. U.

2007-03-01

The generation, storage, transfer, and representation of image data in radiology are standardized by DICOM. To cover the needs of image guided surgery or computer assisted surgery in general one needs to handle patient information besides image data. A large number of objects must be defined in DICOM to address the needs of surgery. We propose an analysis process based on Surgical Workflows that helps to identify these objects together with use cases and requirements motivating for their specification. As the first result we confirmed the need for the specification of representation and transfer of geometric models. The analysis of Surgical Workflows has shown that geometric models are widely used to represent planned procedure steps, surgical tools, anatomical structures, or prosthesis in the context of surgical planning, image guided surgery, augmented reality, and simulation. By now, the models are stored and transferred in several file formats bare of contextual information. The standardization of data types including contextual information and specifications for handling of geometric models allows a broader usage of such models. This paper explains the specification process leading to Geometry Mesh Service Object Pair classes. This process can be a template for the definition of further DICOM classes.

Instrumentation on commercial aircraft for monitoring the atmospheric composition on a global scale: the IAGOS system, technical overview of ozone and carbon monoxide measurements

Directory of Open Access Journals (Sweden)

Phillipe Nédélec

2015-06-01

Full Text Available This article presents the In-service Aircraft of a Global Observing System (IAGOS developed for operations on commercial long-range Airbus aircraft (A330/A340 for monitoring the atmospheric composition. IAGOS is the continuation of the former Measurement of OZone and water vapour on Airbus In-service airCraft (MOZAIC programme (1994–2014 with five aircraft operated by European airlines over 20 yr. MOZAIC has provided unique scientific database used worldwide by the scientific community. In continuation of MOZAIC, IAGOS aims to equip a fleet up to 20 aircraft around the world and for operations over decades. IAGOS started in July 2011 with the first instruments installed aboard a Lufthansa A340-300, and a total of six aircraft are already in operation. We present the technical aircraft system concept, with basic instruments for O3, CO, water vapour and clouds; and optional instruments for measuring either NOy, NOx, aerosols or CO2/CH4. In this article, we focus on the O3 and CO instrumentation while other measurements are or will be described in specific papers. O3 and CO are measured by optimised but well-known methods such as UV absorption and IR correlation, respectively. We describe the data processing/validation and the data quality control for O3 and CO. Using the first two overlapping years of MOZAIC/IAGOS, we conclude that IAGOS can be considered as the continuation of MOZAIC with the same data quality of O3 and CO measurements.

Effect of non-surgical periodontal treatment on the subgingival microbiota of patients with chronic kidney disease

OpenAIRE

Artese,Hilana Paula Carillo; Sousa,Celso Oliveira de; Torres,Maria Cynésia Medeiros de Barros; Silva-Boghossian,Carina Maciel; Colombo,Ana Paula Vieira

2012-01-01

This study investigated the effect of non-surgical periodontal therapy on the composition of subgingival microbiota of patients with chronic kidney disease (CKD). Sixteen CKD pre-dialysis individuals (CKD) and 14 individuals without clinical evidence of kidney disease (C) presenting chronic periodontitis were treated by scaling and root planing. Subgingival samples were collected from each patient and analyzed for their composition by checkerboard at baseline and 3 months post-therapy. Signif...

Cost-effectiveness of decompression according to Gill versus instrumented spondylodesis in the treatment of sciatica due to low grade spondylolytic spondylolisthesis: a prospective randomised controlled trial [NTR1300].

Science.gov (United States)

Arts, Mark P; Verstegen, Marco J T; Brand, Ronald; Koes, Bart W; van den Akker, M Elske; Peul, Wilco C

2008-09-28

Nerve root decompression with instrumented spondylodesis is the most frequently performed surgical procedure in the treatment of patients with symptomatic low-grade spondylolytic spondylolisthesis. Nerve root decompression without instrumented fusion, i.e. Gill's procedure, is an alternative and less invasive approach. A comparative cost-effectiveness study has not been performed yet. We present the design of a randomised controlled trial on cost-effectiveness of decompression according to Gill versus instrumented spondylodesis. All patients (age between 18 and 70 years) with sciatica or neurogenic claudication lasting more than 3 months due to spondylolytic spondylolisthesis grade I or II, are eligible for inclusion. Patients will be randomly allocated to nerve root decompression according to Gill, either unilateral or bilateral, or pedicle screw fixation with interbody fusion. The main primary outcome measure is the functional assessment of the patient measured with the Roland Disability Questionnaire for Sciatica at 12 weeks and 2 years. Other primary outcome measures are perceived recovery and intensity of leg pain and low back pain. The secondary outcome measures include, incidence of re-operations, complications, serum creatine phosphokinase, quality of life, medical consumption, costs, absenteeism, work perception, depression and anxiety, and treatment preference. The study is a randomised prospective multicenter trial in which two surgical techniques are compared in a parallel group design. Patients and research nurse will not be blinded during the follow-up period of 2 years. Currently, nerve root decompression with instrumented fusion is the golden standard in the surgical treatment of low-grade spondylolytic spondylolisthesis, although scientific proof justifying instrumented spondylodesis over simple decompression is lacking. This trial is designed to elucidate the controversy in best surgical treatment of symptomatic patients with low

Cost-effectiveness of decompression according to Gill versus instrumented spondylodesis in the treatment of sciatica due to low grade spondylolytic spondylolisthesis: A prospective randomised controlled trial [NTR1300

Directory of Open Access Journals (Sweden)

Brand Ronald

2008-09-01

Full Text Available Abstract Background Nerve root decompression with instrumented spondylodesis is the most frequently performed surgical procedure in the treatment of patients with symptomatic low-grade spondylolytic spondylolisthesis. Nerve root decompression without instrumented fusion, i.e. Gill's procedure, is an alternative and less invasive approach. A comparative cost-effectiveness study has not been performed yet. We present the design of a randomised controlled trial on cost-effectiveness of decompression according to Gill versus instrumented spondylodesis. Methods/design All patients (age between 18 and 70 years with sciatica or neurogenic claudication lasting more than 3 months due to spondylolytic spondylolisthesis grade I or II, are eligible for inclusion. Patients will be randomly allocated to nerve root decompression according to Gill, either unilateral or bilateral, or pedicle screw fixation with interbody fusion. The main primary outcome measure is the functional assessment of the patient measured with the Roland Disability Questionnaire for Sciatica at 12 weeks and 2 years. Other primary outcome measures are perceived recovery and intensity of leg pain and low back pain. The secondary outcome measures include, incidence of re-operations, complications, serum creatine phosphokinase, quality of life, medical consumption, costs, absenteeism, work perception, depression and anxiety, and treatment preference. The study is a randomised prospective multicenter trial in which two surgical techniques are compared in a parallel group design. Patients and research nurse will not be blinded during the follow-up period of 2 years. Discussion Currently, nerve root decompression with instrumented fusion is the golden standard in the surgical treatment of low-grade spondylolytic spondylolisthesis, although scientific proof justifying instrumented spondylodesis over simple decompression is lacking. This trial is designed to elucidate the controversy in best

Testing electric field models using ring current ion energy spectra from the Equator-S ion composition (ESIC instrument

Directory of Open Access Journals (Sweden)

L. M. Kistler

Full Text Available During the main and early recovery phase of a geomagnetic storm on February 18, 1998, the Equator-S ion composition instrument (ESIC observed spectral features which typically represent the differences in loss along the drift path in the energy range (5–15 keV/e where the drift changes from being E × B dominated to being gradient and curvature drift dominated. We compare the expected energy spectra modeled using a Volland-Stern electric field and a Weimer electric field, assuming charge exchange along the drift path, with the observed energy spectra for H⁺ and O⁺. We find that using the Weimer electric field gives much better agreement with the spectral features, and with the observed losses. Neither model, however, accurately predicts the energies of the observed minima.

Key words. Magnetospheric physics (energetic particles trapped; plasma convection; storms and substorms

What are the important manoeuvres for beginners to minimize surgical time in primary total knee arthroplasty?

Science.gov (United States)

Harato, Kengo; Maeno, Shinichi; Tanikawa, Hidenori; Kaneda, Kazuya; Morishige, Yutaro; Nomoto, So; Niki, Yasuo

2016-08-01

It was hypothesized that surgical time of beginners would be much longer than that of experts. Our purpose was to investigate and clarify the important manoeuvres for beginners to minimize surgical time in primary total knee arthroplasty (TKA) as a multicentre study. A total of 300 knees in 248 patients (averaged 74.6 years) were enrolled. All TKAs were done using the same instruments and the same measured resection technique at 14 facilities by 25 orthopaedic surgeons. Surgeons were divided into three surgeon groups (four experts, nine medium-volume surgeons and 12 beginners). The surgical technique was divided into five phases. Detailed surgical time and ratio of the time in each phase to overall surgical time were recorded and compared among the groups in each phase. A total of 62, 119, and 119 TKAs were done by beginners, medium-volume surgeons, and experts, respectively. Significant differences in surgical time among the groups were seen in each phase. Concerning the ratio of the time, experts and medium-volume surgeons seemed cautious in fixation of the permanent component compared to other phases. Interestingly, even in ratio, beginners and medium-volume surgeons took more time in exposure of soft tissue compared to experts. (0.14 in beginners, 0.13 in medium-volume surgeons, 0.11 in experts, P time in exposure and closure of soft tissue compared to experts. Improvement in basic technique is essential to minimize surgical time among beginners. First of all, surgical instructors should teach basic techniques in primary TKA for beginners. Therapeutic studies, Level IV.

Correction Capability in the 3 Anatomic Planes of Different Pedicle Screw Designs in Scoliosis Instrumentation.

Science.gov (United States)

Wang, Xiaoyu; Aubin, Carl-Eric; Coleman, John; Rawlinson, Jeremy

2017-05-01

Computer simulations to compare the correction capabilities of different pedicle screws in adolescent idiopathic scoliosis (AIS) instrumentations. To compare the correction and resulting bone-screw forces associated with different pedicle screws in scoliosis instrumentations. Pedicle screw fixation is widely used in surgical instrumentation for spinal deformity treatment. Screw design, correction philosophies, and surgical techniques are constantly evolving to achieve better control of the vertebrae and correction of the spinal deformity. Yet, there remains a lack of biomechanical studies that quantify the effects and advantages of different screw designs in terms of correction kinematics. The correction capabilities of fixed-angle, multiaxial, uniaxial, and saddle axial screws were kinematically analyzed, simulated, and compared. These simulations were based on the screw patterns and correction techniques proposed by 2 experienced surgeons for 2 AIS cases. Additional instrumentations were assessed to compare the correction and resulting bone-screw forces associated with each type of screw. The fixed-angle, uniaxial and saddle axial screws had similar kinematic behavior and performed better than multiaxial screws in the coronal and transverse planes (8% and 30% greater simulated corrections, respectively). Uniaxial and multiaxial screws were less effective than fixed-angle and saddle axial screws in transmitting compression/distraction to the anterior spine because of their sagittal plane mobility between the screw head and shank. Only the saddle axial screws allow vertebra angle in the sagittal plane to be independently adjusted. Pedicle screws of different designs performed differently for deformity corrections or for compensating screw placement variations in different anatomic planes. For a given AIS case, screw types should be determined based on the particular instrumentation objectives, the deformity's stiffness and characteristics so as to make the best of

[Surgical treatment of chronic pancreatitis based on classification of M. Buchler and coworkers].

Science.gov (United States)

Krivoruchko, I A; Boĭko, V V; Goncharova, N N; Andreeshchev, S A

2011-08-01

The results of surgical treatment of 452 patients, suffering chronic pancreatitis (CHP), were analyzed. The CHP classification, elaborated by M. Buchler and coworkers (2009), based on clinical signs, morphological peculiarities and pancreatic function analysis, contains scientifically substantiated recommendations for choice of diagnostic methods and complex treatment of the disease. The classification proposed is simple in application and constitutes an instrument for studying and comparison of the CHP course severity, the patients prognosis and treatment.

Disposable surgical face masks for preventing surgical wound infection in clean surgery

Directory of Open Access Journals (Sweden)

Allyson Lipp

Full Text Available BACKGROUND: Surgical face masks were originally developed to contain and filter droplets containing microorganisms expelled from the mouth and nasopharynx of healthcare workers during surgery, thereby providing protection for the patient. However, there are several ways in which surgical face masks could potentially contribute to contamination of the surgical wound, e.g. by incorrect wear or by leaking air from the side of the mask due to poor string tension. OBJECTIVES: To determine whether disposable surgical face masks worn by the surgical team during clean surgery prevent postoperative surgical wound infection. SEARCH METHODS: We searched The Cochrane Wounds Group Specialised Register (searched 14 September 2011; The Cochrane Central Register of Controlled Trials (CENTRAL (The Cochrane Library 2011, Issue 3; Ovid MEDLINE (2008 to August Week 5 2011; Ovid MEDLINE (In-Process &Other Non-Indexed Citations September 13, 2011; Ovid EMBASE (2008 to 2011 Week 35; and EBSCO CINAHL (2008 to 9 September 2011. SELECTION CRITERIA: Randomized controlled trials (RCTs and quasi-randomized controlled trials comparing the use of disposable surgical masks with the use of no mask. DATA COLLECTION AND ANALYSIS: Two review authors extracted data independently. MAIN RESULTS: Three trials were included, involving a total of 2113 participants. There was no statistically significant difference in infection rates between the masked and unmasked group in any of the trials. AUTHORS' CONCLUSIONS: From the limited results it is unclear whether the wearing of surgical face masks by members of the surgical team has any impact on surgical wound infection rates for patients undergoing clean surgery.

How surgical mentors teach: a classification of in vivo teaching behaviors part 2: physical teaching guidance.

Science.gov (United States)

Sutkin, Gary; Littleton, Eliza B; Kanter, Steven L

2015-01-01

To study surgical teaching captured on film and analyze it at a fine level of detail to categorize physical teaching behaviors. We describe live, filmed, intraoperative nonverbal exchanges between surgical attending physicians and their trainees (residents and fellows). From the films, we chose key teaching moments and transcribed participants' utterances, actions, and gestures. In follow-up interviews, attending physicians and trainees watched videos of their teaching case and answered open-ended questions about their teaching methods. Using a grounded theory approach, we examined the videos and interviews for what might be construed as a teaching behavior and refined the physical teaching categories through constant comparison. We filmed 5 cases in the operating suite of a university teaching hospital that provides gynecologic surgical care. We included 5 attending gynecologic surgeons, 3 fellows, and 5 residents for this study. More than 6 hours of film and 3 hours of interviews were transcribed, and more than 250 physical teaching motions were captured. Attending surgeons relied on actions and gestures, sometimes wordlessly, to achieve pedagogical and surgical goals simultaneously. Physical teaching included attending physician-initiated actions that required immediate corollary actions from the trainee, gestures to illustrate a step or indicate which instrument to be used next, supporting or retracting tissues, repositioning the trainee's instruments, and placement of the attending physicians' hands on the trainees' hands to guide them. Attending physicians often voiced surprise at the range of their own teaching behaviors captured on film. Interrater reliability was high using the Cohen κ, which was 0.76 for the physical categories. Physical guidance is essential in educating a surgical trainee, may be tacit, and is not always accompanied by speech. Awareness of teaching behaviors may encourage deliberate teaching and reflection on how to innovate pedagogy

The design of a simple portable γ ray detecting instrument based on MCU

International Nuclear Information System (INIS)

Liu Chunmei; Cao Wen; Zhang Jiang

2008-01-01

The internal composition of the γ ray detecting instrument based on MCU and the working of the real electric circuit are introduced. The single-chip microcomputer of PHILIPS is adopted as the micro-controller of the instrument, realizing such functions as counting input pulses within fixed time, data processing, liquid crystal display, keyboard interface, serial communication, etc. The instrument turns out to be low in work consumption, with relatively high degree of concentration and computerization, and is recommended for field operations. (authors)

Developing Spent Fuel Assembly for Advanced NDA Instrument Calibration - NGSI Spent Fuel Project

Energy Technology Data Exchange (ETDEWEB)

Hu, Jianwei [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Gauld, Ian C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Banfield, James [GE Hitachi Nuclear Energy, Wilmington, NC (United States); Skutnik, Steven [Univ. of Tennessee, Knoxville, TN (United States)

2014-02-01

This report summarizes the work by Oak Ridge National Laboratory to investigate the application of modeling and simulation to support the performance assessment and calibration of the advanced nondestructive assay (NDA) instruments developed under the Next Generation Safeguards Initiative Spent Fuel (NGSI-SF) Project. Advanced NDA instrument calibration will likely require reference spent fuel assemblies with well-characterized nuclide compositions that can serve as working standards. Because no reference spent fuel standard currently exists, and the practical ability to obtain direct measurement of nuclide compositions using destructive assay (DA) measurements of an entire fuel assembly is prohibitive in the near term due to the complexity and cost of spent fuel experiments, modeling and simulation will be required to construct such reference fuel assemblies. These calculations will be used to support instrument field tests at the Swedish Interim Storage Facility (Clab) for Spent Nuclear Fuel.

HYPOSTASES OF THE POLYPHONIC TREATMENTS IN GHEORGHE NEAGA’S INSTRUMENTAL CHAMBER MUSIC

Directory of Open Access Journals (Sweden)

CHICIUC NATALIA

2016-06-01

Full Text Available Gheorghe Neaga’s instrumental chamber music constitutes a rich repertoire with representative works for native academic music. The more so, since from the perspective of composition art, the author tended to the excellence of each element of musical expressiveness. As evidence of this can be considered his instrumental chamber works, including sonatas, suites for various instrumental configurations and instrumental ensembles, and not least, the infinite string of instrumental miniatures. Returning to the musical expressiveness, it is necessary to emphasize the fact that in Gheorghe Neaga’s instrumental chamber music is evident, in a different measure for each work, a polyphonic treatment which can be considered typical of the author. That is why the present article aims to present some principles and techniques used by the composer in his own manner in some of his creations offered as examples.

[AN OVERALL SOUND PROCESS] Becoming Neoclassical: Instrumentation in the Sketches for Webern's Concerto, Op. 24

Directory of Open Access Journals (Sweden)

David H. Miller

2016-05-01

Full Text Available In September 1928 Anton Webern wrote to publisher Emil Hertzka to report on the composition of a work “in the spirit of some of Bach’s Brandenburg Concertos.” In June 1934 that work stood completed as the Concerto for Nine Instruments, Op. 24. While Op. 24 has been celebrated as a paradigmatic example of Webern’s forward-looking serial techniques, it simultaneously exhibits a strong neoclassical influence, as Kathryn Bailey (1991 has demonstrated in her study of sonata and ritornello principles in the Concerto’s first movement. Neoclassical models may have also played a role in dramatically shifting conceptions of instrumentation and genre evident in sketches from the work’s extended period of composition, during which time it transformed from a piece for large symphonic orchestra, to a concerto for solo piano with orchestral accompaniment, to a concerto grosso with a continuo-like piano part. The dramatic shifts found in the sketches are best understood in relation to Webern’s compositional activities in the decade preceding Op. 24. During this period, Webern revised several of his pre-World War I orchestral compositions, reducing the size and diversity of the ensembles with an eye towards Fasslichkeit (“comprehensibility”; a similar goal motivated the arrangements he produced for Arnold Schoenberg’s Society for Private Musical Performances. When considered alongside an instrumentation-centric view of the sketches for Op. 24, these activities suggest an intriguing view of the Concerto. If its twelve-tone row marks Op. 24 as an apex of Webern’s serial technique, its instrumentation makes it an apex of his neoclassicism.In September 1928 Anton Webern wrote to publisher Emil Hertzka to report on the composition of a work “in the spirit of some of Bach’s Brandenburg Concertos.” In June 1934 that work stood completed as the Concerto for Nine Instruments, Op. 24. While Op. 24 has been celebrated as a paradigmatic example

Ex vivo study on root canal instrumentation of two rotary nickel-titanium systems in comparison to stainless steel hand instruments.

Science.gov (United States)

Vaudt, J; Bitter, K; Neumann, K; Kielbassa, A M

2009-01-01

To investigate instrumentation time, working safety and the shaping ability of two rotary nickel-titanium (NiTi) systems (Alpha System and ProTaper Universal) in comparison to stainless steel hand instruments. A total of 45 mesial root canals of extracted human mandibular molars were selected. On the basis of the degree of curvature the matched teeth were allocated randomly into three groups of 15 teeth each. In group 1 root canals were prepared to size 30 using a standardized manual preparation technique; in group 2 and 3 rotary NiTi instruments were used following the manufacturers' instructions. Instrumentation time and procedural errors were recorded. With the aid of pre- and postoperative radiographs, apical straightening of the canal curvature was determined. Photographs of the coronal, middle and apical cross-sections of the pre- and postoperative canals were taken, and superimposed using a standard software. Based on these composite images the portion of uninstrumented canal walls was evaluated. Active instrumentation time of the Alpha System was significantly reduced compared with ProTaper Universal and hand instrumentation (P < 0.05; anova). No instrument fractures occurred in any of the groups. The Alpha System revealed significantly less apical straightening compared with the other instruments (P < 0.05; Mann-Whitney U test). In the apical cross-sections Alpha System resulted in significantly less uninstrumented canal walls compared with stainless steel files (P < 0.05; chi-squared test). Despite the demonstrated differences between the systems, an apical straightening effect could not be prevented; areas of uninstrumented root canal wall were left in all regions using the various systems.

A current assessment of diversity characteristics and perceptions of their importance in the surgical workforce.

Science.gov (United States)

French, Judith C; O'Rourke, Colin; Walsh, R Matthew

2014-11-01

Diversity in the workforce is vital to successful businesses. Healthcare in general has suffered from a lack of cultural competence, which is the ability to successfully interact with individuals from diverse backgrounds. In order to eliminate discrimination and build a diverse workforce, physicians' perceptions and importance of diversity need to be measured. A 25-item, anonymous, online questionnaire was created, and a cross-sectional survey was performed. The instrument consisted of demographic and Likert-style questions which attempted to determine the participants' perceptions of the current level of diversity in their specialty and their perceived importance of particular diversity categories. Over 1,000 responses were received from US-based physicians across all specialties and levels of training. Statistically significant differences existed between surgical and nonsurgical specialties with regard to gender, prior work experience, and political identity. In the surgical workforce, there is significant perceived homogeneity regarding gender/sexual identity. Surgical respondents also deemed gender/sexual identity diversity to be less important than respondents from medical specialties. Surgeons and surgical trainees are less diverse than their medical colleagues, both by demographics and self-acknowledgement. The long-term impact and potential barriers to resolve these differences in diversity require further investigation.

Custom ultrasonic instrumentation for flow measurement and real-time binary gas analysis in the CERN ATLAS experiment

Science.gov (United States)

Alhroob, M.; Battistin, M.; Berry, S.; Bitadze, A.; Bonneau, P.; Boyd, G.; Crespo-Lopez, O.; Degeorge, C.; Deterre, C.; Di Girolamo, B.; Doubek, M.; Favre, G.; Hallewell, G.; Katunin, S.; Lombard, D.; Madsen, A.; McMahon, S.; Nagai, K.; O'Rourke, A.; Pearson, B.; Robinson, D.; Rossi, C.; Rozanov, A.; Stanecka, E.; Strauss, M.; Vacek, V.; Vaglio, R.; Young, J.; Zwalinski, L.

2017-01-01

The development of custom ultrasonic instrumentation was motivated by the need for continuous real-time monitoring of possible leaks and mass flow measurement in the evaporative cooling systems of the ATLAS silicon trackers. The instruments use pairs of ultrasonic transducers transmitting sound bursts and measuring transit times in opposite directions. The gas flow rate is calculated from the difference in transit times, while the sound velocity is deduced from their average. The gas composition is then evaluated by comparison with a molar composition vs. sound velocity database, based on the direct dependence between sound velocity and component molar concentration in a gas mixture at a known temperature and pressure. The instrumentation has been developed in several geometries, with five instruments now integrated and in continuous operation within the ATLAS Detector Control System (DCS) and its finite state machine. One instrument monitors C3F8 coolant leaks into the Pixel detector N2 envelope with a molar resolution better than 2ṡ 10-5, and has indicated a level of 0.14 % when all the cooling loops of the recently re-installed Pixel detector are operational. Another instrument monitors air ingress into the C3F8 condenser of the new C3F8 thermosiphon coolant recirculator, with sub-percent precision. The recent effect of the introduction of a small quantity of N2 volume into the 9.5 m3 total volume of the thermosiphon system was clearly seen with this instrument. Custom microcontroller-based readout has been developed for the instruments, allowing readout into the ATLAS DCS via Modbus TCP/IP on Ethernet. The instrumentation has many potential applications where continuous binary gas composition is required, including in hydrocarbon and anaesthetic gas mixtures.

Thermostable adenylate kinase technology: a new process indicator and its use as a validation tool for the reprocessing of surgical instruments.

Science.gov (United States)

Hesp, J R; Poolman, T M; Budge, C; Batten, L; Alexander, F; McLuckie, G; O'Brien, S; Wells, P; Raven, N D H; Sutton, J M

2010-02-01

Adenylate kinase (tAK), a thermostable enzyme, was assessed as a possible means of providing a quantitative measure of cleaning efficacy suitable for validating the performance of an automated washer disinfector (AWD) during routine use. Two indicator formulations were developed using either a commercially available washer disinfector soil or a protein-based soil. Each indicator consisted of 100 microg (in test soil) of tAK dried on to a steel or plastic surface. These indicators were placed in each basket of a washer disinfector and processed alongside soiled surgical instruments during a standard day's operation. After processing, remaining tAK activity was detected using a rapid enzyme assay (2 min detection time) in a handheld hygiene monitor. The amount of tAK remaining on each indictor after a full AWD cycle was found to range from 0.1 to 0.4 ng, which represented a mean log(10) removal of 5.8+/-0.3. There was no statistical difference in the residual tAK activity between individual runs or the position of the indicator in the machine. The tAK indicator was also used to analyse the protein removal within each component of the wash cycle. These results demonstrated that all phases of the wash process contributed to the removal of the protein load, with the main wash alone being responsible for 3.6-4.0 log(10) reductions in protein activity. We propose that a quantitative cleaning index using such rapid readout indicator devices would provide a valuable addition to the methodologies for validating cleaning processes.

Increase in Periodontal Interleukin-1β Gene Expression Following Osseous Resective Surgery Using Conventional Rotary Instruments Compared with Piezosurgery: A Split-Mouth Randomized Clinical Trial.

Science.gov (United States)

Aimetti, Mario; Ferrarotti, Francesco; Bergandi, Loredana; Saksing, Laura; Parducci, Francesca; Romano, Federica

2016-01-01

The purpose of this study was to evaluate the early inflammatory response following osseous resective surgery (ORS) with Piezosurgery compared to commonly used diamond burs. A sample was selected of 24 bilateral posterior sextants requiring ORS in 12 chronic periodontitis patients in a split-mouth design. In 12 sextants, bone recontouring was performed using a piezoelectric device. In the contralateral sextants, rotary instruments were used. Sextants treated with Piezosurgery obtained similar 12-month clinical results but lower postsurgical gene expression of interleukin-1β (IL-1β), a well-known proinflammatory cytokine, and lower patient morbidity compared with sextants treated with rotary instruments. In spite of the longer surgical time, the use of Piezosurgery for ORS seems to promote more favorable wound healing compared with rotary instruments, as the lower pain and the low levels of IL-1β mRNA at the surgical sites suggest a milder underlying inflammatory response.

Surgical treatment for hypopharyngeal cysts with a side-opened direct laryngoscope.

Science.gov (United States)

Kawaida, M; Fukuda, H; Shiotani, A; Kohno, N

1994-01-01

Two cases of hypopharyngeal cyst are reported. Both cysts occurred in the piriform sinus of the hypopharynx. Histopathological examination indicated that both were retention cysts. These cysts were removed by laryngomicrosurgical technique using a side-opened direct laryngoscope. In the cyst with a distinct base, a laryngomicrosurgical snare was used for removal. In the wide-based cyst, the mucous membrane around the cyst was incised with an electrosurgical instrument and then detached to facilitate removal. In this paper, we describe our surgical procedure for removing hypopharyngeal cysts and discuss the causes of such cysts.

Assessment of wind turbine load measurement instrumentation

Energy Technology Data Exchange (ETDEWEB)

Morfiadakis, E; Papadopoulos, K [CRES (Greece); Borg, N van der [ECN, Petten (Netherlands); Petersen, S M [Risoe, Roskilde (Denmark); Seifert, H [DEWI, Wilhelmshaven (Germany)

1999-03-01

In the framework of Sub-Task3 `Wind turbine load measurement instrumentation` of EU-project `European Wind Turbine Testing Procedure Development`, the load measurement techniques have been assessed by laboratory, full scale and numerical tests. The existing methods have been reviewed with emphasis on the strain gage application techniques on composite materials and recommendations are provided for the optimisation of load measurement techniques. (au) EU. 14 refs.

Evaluation of primary and secondary stability of titanium implants using different surgical techniques.

Science.gov (United States)

Tabassum, Afsheen; Meijer, Gert J; Walboomers, X Frank; Jansen, John A

2014-04-01

To investigate the influence of different surgical techniques on the primary and secondary implant stability using trabecular bone of goats as an implantation model. In the iliac crest of eight goats, 48 cylindrical-screw-type implants with a diameter of 4.2 mm (Dyna(®) ; Bergen op Zoom, the Netherlands) were installed, using three different surgical techniques: (i) 5% undersized, using a final drill diameter of 4 mm; (ii) 15% undersized, using a final drill diameter of 3.6 mm; and (iii) 25% undersized, using a final drill diameter of 3.2 mm. Peak insertion torque values were measured by a Digital(®) (MARK-10 Corporation, New York, NY, USA) torque gauge instrument during placement. At 3 weeks after implantation, removal torque was measured. Histomorphometrically, the peri-implant bone volume was measured in three zones; the inner zone (0-500 μm), the middle zone (500-1000 μm) and the outer zone (1000-1500 μm). Evaluation of the obtained data demonstrated no statistically significant difference between different surgical techniques regarding removal torque values. With respect to the percentage peri-implant bone volume (%BV), also no significant difference could be observed between all three applied surgical techniques for both the inner, middle and outer zone. However, irrespective of the surgical technique, it was noticed that the %BV was significantly higher for the inner zone as compared to middle and outer zone (P < 0.05) around the implant. At 3 weeks after implant installation, independent of the used undersized surgical technique, the %BV in the inner zone (0-500 μm) peri-implant area was improved due to both condensation of the surrounding bone as also the translocation of host bone particles along the implant surface. Surprisingly, no mechanical beneficial effect of the 25% undersized surgical technique could be observed as compared to the 5% or 15% undersized surgical technique to improve primary or secondary implant stability. © 2013

Outcome and treatment of postoperative spine surgical site infections: predictors of treatment success and failure.

Science.gov (United States)

Maruo, Keishi; Berven, Sigurd H

2014-05-01

Surgical site infection (SSI) is an important complication after spine surgery. The management of SSI is characterized by significant variability, and there is little guidance regarding an evidence-based approach. The objective of this study was to identify risk factors associated with treatment failure of SSI after spine surgery. A total of 225 consecutive patients with SSI after spine surgery between July 2005 and July 2010 were studied retrospectively. Patients were treated with aggressive surgical debridement and prolonged antibiotic therapy. Outcome and risk factors were analyzed in 197 patients having 1 year of follow-up. Treatment success was defined as resolution within 90 days. A total of 126 (76 %) cases were treated with retention of implants. Forty-three (22 %) cases had treatment failure with five (2.5 %) cases resulting in death. Lower rates of treatment success were observed with late infection (38 %), fusion with fixation to the ilium (67 %), Propionibacterium acnes (43 %), poly microbial infection (68 %), >6 operated spinal levels (67 %), and instrumented cases (73 %). Higher rates of early resolution were observed with superficial infection (93 %), methicillin-sensitive Staphylococcus aureus (95 %), and failure. Superficial infection and methicillin-sensitive Staphylococcus aureus were predictors of early resolution. Postoperative spine infections were treated with aggressive surgical debridement and antibiotic therapy. High rates of treatment failure occurred in cases with late infection, long instrumented fusions, polymicrobial infections, and Propionibacterium acnes. Removal of implants and direct or staged re-implantation may be a useful strategy in cases with high risk of treatment failure.

Clinical features and surgical management of spinal osteoblastoma: a retrospective study in 18 cases.

Directory of Open Access Journals (Sweden)

Zhonghai Li

Full Text Available OBJECTIVES: To investigate the clinical manifestation and surgical outcome of spinal osteoblastoma. METHODS: From June 2006 to July 2011, 18 patients with spinal osteoblastoma treated surgically were analyzed retrospectively. There were 11 males and 7 females with an average age of 27.5 years（range, 16-38 years. The tumors were located at C5 in 7, C6 in 6, C7 in 3, C6-T1 1 in 1 and T11 in 1. Based on WBB classification, 16 were 1-3 or 10-12 and 2 were 4-9 and 1-3. 18 operations had been performed with en bloc resection. A posterior approach was used for 16 patients, and a combined posterior and anterior approach was used for 2 patients. Reconstruction using instrumentation and fusion was performed using spinal instrumentation in 13 patients. We used visual analogue scales (VAS to evaluate the change of pain before and after the operation, and the McCormick System to assess functional status of the spine. Imaging test was used to review the stability and recurrence rate of spine cord, and the confluence of graft bones. RESULTS: All cases were followed up for 24-80 months (average, 38.4 months. The average surgical time was 120.8 minutes (range, 80-220 minutes, with the average intraoperative blood loss of 520 ml (range, 300-1200 ml. During the follow-up period, the VAS grade reduced from 6.46±1.32 to 2.26±1.05 (P <0.05. 15 patients had neurological function improved and 3 remained no change which was evaluated by McCormick scale for spinal function status at final follow-up. CONCLUSIONS: Spinal osteoblastoma has its own specific radiographic features. There is some recurrence in simple curettage of tumor lesion. The thoroughly en bloc resection of tumor or spondylectomy, bone fusion and strong in Ter fixation are the key points for successful surgical treatment.

Prototyping a Hybrid Cooperative and Tele-robotic Surgical System for Retinal Microsurgery.

Science.gov (United States)

Balicki, Marcin; Xia, Tian; Jung, Min Yang; Deguet, Anton; Vagvolgyi, Balazs; Kazanzides, Peter; Taylor, Russell

2011-06-01

This paper presents the design of a tele-robotic microsurgical platform designed for development of cooperative and tele-operative control schemes, sensor based smart instruments, user interfaces and new surgical techniques with eye surgery as the driving application. The system is built using the distributed component-based cisst libraries and the Surgical Assistant Workstation framework. It includes a cooperatively controlled EyeRobot2, a da Vinci Master manipulator, and a remote stereo visualization system. We use constrained optimization based virtual fixture control to provide Virtual Remote-Center-of-Motion (vRCM) and haptic feedback. Such system can be used in a hybrid setup, combining local cooperative control with remote tele-operation, where an experienced surgeon can provide hand-over-hand tutoring to a novice user. In another scheme, the system can provide haptic feedback based on virtual fixtures constructed from real-time force and proximity sensor information.

Natural language generation of surgical procedures.

Science.gov (United States)

Wagner, J C; Rogers, J E; Baud, R H; Scherrer, J R

1999-01-01

A number of compositional Medical Concept Representation systems are being developed. Although these provide for a detailed conceptual representation of the underlying information, they have to be translated back to natural language for used by end-users and applications. The GALEN programme has been developing one such representation and we report here on a tool developed to generate natural language phrases from the GALEN conceptual representations. This tool can be adapted to different source modelling schemes and to different destination languages or sublanguages of a domain. It is based on a multilingual approach to natural language generation, realised through a clean separation of the domain model from the linguistic model and their link by well defined structures. Specific knowledge structures and operations have been developed for bridging between the modelling 'style' of the conceptual representation and natural language. Using the example of the scheme developed for modelling surgical operative procedures within the GALEN-IN-USE project, we show how the generator is adapted to such a scheme. The basic characteristics of the surgical procedures scheme are presented together with the basic principles of the generation tool. Using worked examples, we discuss the transformation operations which change the initial source representation into a form which can more directly be translated to a given natural language. In particular, the linguistic knowledge which has to be introduced--such as definitions of concepts and relationships is described. We explain the overall generator strategy and how particular transformation operations are triggered by language-dependent and conceptual parameters. Results are shown for generated French phrases corresponding to surgical procedures from the urology domain.

Next-generation robotic surgery--from the aspect of surgical robots developed by industry.

Science.gov (United States)

Nakadate, Ryu; Arata, Jumpei; Hashizume, Makoto

2015-02-01

At present, much of the research conducted worldwide focuses on extending the ability of surgical robots. One approach is to extend robotic dexterity. For instance, accessibility and dexterity of the surgical instruments remains the largest issue for reduced port surgery such as single port surgery or natural orifice surgery. To solve this problem, a great deal of research is currently conducted in the field of robotics. Enhancing the surgeon's perception is an approach that uses advanced sensor technology. The real-time data acquired through the robotic system combined with the data stored in the robot (such as the robot's location) provide a major advantage. This paper aims at introducing state-of-the-art products and pre-market products in this technological advancement, namely the robotic challenge in extending dexterity and hopefully providing the path to robotic surgery in the near future.

Minimizing surgical skin incision scars with a latex surgical glove.

Science.gov (United States)

Han, So-Eun; Ryoo, Suk-Tae; Lim, So Young; Pyon, Jai-Kyung; Bang, Sa-Ik; Oh, Kap-Sung; Mun, Goo-Hyun

2013-04-01

The current trend in minimally invasive surgery is to make a small surgical incision. However, the excessive tensile stress applied by the retractors to the skin surrounding the incision often results in a long wound healing time and extensive scarring. To minimize these types of wound problems, the authors evaluated a simple and cost-effective method to minimize surgical incision scars based on the use of a latex surgical glove. The tunnel-shaped part of a powder-free latex surgical glove was applied to the incision and the dissection plane. It was fixed to the full layer of the dissection plane with sutures. The glove on the skin surface then was sealed with Ioban (3 M Health Care, St. Paul, MN, USA) to prevent movement. The operation proceeded as usual, with the retractor running through the tunnel of the latex glove. It was possible to complete the operation without any disturbance of the visual field by the surgical glove, and the glove was neither torn nor separated by the retractors. The retractors caused traction and friction during the operation, but the extent of damage to the postoperative skin incision margin was remarkably less than when the operation was performed without a glove. This simple and cost-effective method is based on the use of a latex surgical glove to protect the surgical skin incision site and improve the appearance of the postoperative scar. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Thorascopic resection of an apical paraspinal schwannoma using the da Vinci surgical system.

Science.gov (United States)

Finley, David; Sherman, Jonathan H; Avila, Edward; Bilsky, Mark

2014-01-01

Posterior mediastinal neurogenic tumors have traditionally been resected via an open posterolateral thoracotomy. Video-assisted thorascopic surgery has emerged as an alternative technique allowing for improved morbidity with decreased blood loss, less postoperative pain, and a shorter recovery period, among others. The da Vinci surgical system, as first described for urologic procedures, has recently been reported for lung lobectomy. This technique provides the advantages of instrumentation with 6 degrees of freedom, stable operating arms, and improved visualization with the three-dimensional high-definition camera. We describe the technique for thorascopic resection of an apical paraspinal schwannoma of the T1 nerve root with the da Vinci surgical system. This technique used a specialized intraoperative neuromonitoring probe for free-running electromyography (EMG) and triggered EMG. We demonstrate successful resection of a posterior paraspinal schwannoma with the da Vinci surgical system while preserving neurologic function. The patient displayed stable intraoperative monitoring of the T1 nerve root and full intrinsic hand strength postoperatively. The technique described in this article introduces robotic system accuracy and precludes the need for an open thoracotomy. In addition, this approach demonstrates the ability of the da Vinci surgical system to safely dissect tumors from their neural attachments and is applicable to other such lesions of similar size and location. Georg Thieme Verlag KG Stuttgart · New York.

A multicenter study of the outcomes of the surgical treatment of adolescent idiopathic scoliosis using the Scoliosis Research Society (SRS) outcome instrument.

Science.gov (United States)

Merola, Andrew A; Haher, Thomas R; Brkaric, Mario; Panagopoulos, Georgia; Mathur, Samir; Kohani, Omid; Lowe, Thomas G; Lenke, Larry G; Wenger, Dennis R; Newton, Peter O; Clements, David H; Betz, Randal R

2002-09-15

A multicenter study of the outcomes of the surgical treatment of adolescent idiopathic scoliosis using the Scoliosis Research Society Questionnaire (SRS 24). To evaluate the patient based outcome of the surgical treatment of adolescent idiopathic scoliosis. A paucity of information exists with respect to patient measures of outcome regarding the surgical treatment of adolescent idiopathic scoliosis. To our knowledge, no prospective outcome study on this topic thus far exists. Using the SRS 24 questionnaire, seven scoliosis centers agreed to prospectively assess outcome for surgically treated patients with adolescent idiopathic scoliosis. Data were collected before surgery and at 24 months after surgery. Data were analyzed using paired and independent samples t test for all seven SRS 24 questionnaire domains (Pain, General Self-Image, Postoperative Self-Image, Postoperative Function, Function From Back Condition, General Level of Activity, and Satisfaction) using Statistical Package for Social Science. The domains were analyzed with respect to the total cohort, gender, curve magnitude, and type of surgery using independent-samples t tests. A total of 242 patients were included in our analysis. A baseline preoperative pain level of 3.68 of 5 was found. This improved to 4.63 after surgery, representing an improvement of 0.95 points. Surgical intervention was associated with improving outcome when compared with preoperative status. Pain, General Self-Image, Function From Back Condition, and Level of Activity all demonstrated statistically significant improvement as compared with preoperative status (P adolescent scoliosis population. Pain scores were improved in our study population at the 2-year postsurgical follow-up. Statistically significant improvements were likewise seen in the General Self-Image, Function From Back Condition, and Level of Activity domains. The present study demonstrates the ability of surgery to improve the outcome of patients afflicted with

Care practices of older people with dementia in the surgical ward: A questionnaire survey

Directory of Open Access Journals (Sweden)

Nina Hynninen

2016-11-01

Full Text Available Objectives: The objective of this study was to describe the care practices of nursing staff caring older people with dementia in a surgical ward. Methods: The data were collected from nursing staff (n = 191 working in surgical wards in one district area in Finland during October to November 2015. Data were collected using a structured questionnaire and analyzed statistically. The instrument consists of a total number of 141 items and four dimensions. The dimensions were as follows: background information (12 of items, specific characteristics of older people with dementia in a surgical ward (24 of items, specific characteristics of their care in a surgical ward (66 of items and use of physical restraints and alternative models for use of restraints for people with dementia (39 of items. Results: The questions which measure the nursing staff’s own assessment of care practices when caring for people with dementia in surgical wards were selected: counseling people with dementia, reaction when a surgical patient with dementia displays challenging behavior and use of alternative approach instead of physical restraints. Most commonly the nursing staff pay attention to patient’s state of alertness before counseling older people with dementia. Instead of using restraints, nursing staff gave painkillers for the patient and tried to draw patients’ attention elsewhere. The nursing staff with longer work experience estimate that they can handle the patients’ challenging behavior. They react by doing nothing more often than others. They pretend not to hear, see or notice anything. Conclusion: The findings of this study can be applied in nursing practice and in future studies focusing on the care practices among older people with dementia in acute care environment. The results can be used while developing patient treatments process in surgical ward to meet future needs.

Facial transplantation: an anatomic and surgical analysis of the periorbital functional unit.

Science.gov (United States)

Vasilic, Dalibor; Barker, John H; Blagg, Ross; Whitaker, Iain; Kon, Moshe; Gossman, M Douglas

2010-01-01

Complete loss of eyelid pair is associated with chronic discomfort, corneal ulceration, and visual impairment. Contemporary reconstructive techniques rarely provide functionally acceptable results. Composite tissue allotransplantation may provide a viable alternative. This study reports on neurovascular anatomy and technical details of harvesting an isolated periorbital unit and discusses its functional potential. Twenty-four hemifaces (12 fresh cadavers) were dissected to study surgically relevant neurovascular structures and to develop an efficient harvest method. Angiographic analysis was performed in seven hemifaces following harvest. The superficial temporal and facial vessels demonstrated consistent location and diameters. Anatomic variability was characterized by the absence of the frontal branch of the superficial temporal artery or facial-to-angular artery continuation, but never of both vessels in the same hemiface. Angiographic analysis demonstrated filling of the eyelid arcades, provided the anastomoses between the internal and external carotid branches were preserved. The facial nerve exhibited consistent planar arrangement and diameters in the intraparotid and proximal extraparotid regions, but less so in the distal nerve course. The inferior zygomatic and buccal branches frequently coinnervated the orbicularis oculi and lower facial muscles with an unpredictable intermuscular course. Based on the foregoing, an effective surgical harvest of the periorbital composite was developed. Surgical harvest of a functional periorbital allotransplant is technically feasible. Revascularization of the isolated periorbital unit is influenced by variations in regional anatomy and cannot be guaranteed by a single vascular pedicle. The orbicularis oculi muscle and its innervation can be preserved, and recovery, albeit without the certainty of reflexive blinking, is expected.

A software-based tool for video motion tracking in the surgical skills assessment landscape

OpenAIRE

Ganni, S.; Botden, Sanne M.B.I.; Chmarra, M.K.; Goossens, R.H.M.; Jakimowicz, J.J.

2018-01-01

Background: The use of motion tracking has been proved to provide an objective assessment in surgical skills training. Current systems, however, require the use of additional equipment or specialised laparoscopic instruments and cameras to extract the data. The aim of this study was to determine the possibility of using a software-based solution to extract the data. Methods: 6 expert and 23 novice participants performed a basic laparoscopic cholecystectomy procedure in the operating room. The...

Approaching time is important for assessment of endoscopic surgical skills.

Science.gov (United States)

Tokunaga, Masakazu; Egi, Hiroyuki; Hattori, Minoru; Yoshimitsu, Masanori; Sumitani, Daisuke; Kawahara, Tomohiro; Okajima, Masazumi; Ohdan, Hideki

2012-05-01

This study aimed to verify whether the approaching time (the time taken to reach the target point from another point, a short distance apart, during point-to-point movement in endoscopic surgery), assessed using the Hiroshima University Endoscopic Surgical Assessment Device (HUESAD), could distinguish the skill level of surgeons. Expert surgeons (who had performed more than 50 endoscopic surgeries) and novice surgeons (who had no experience in performing endoscopic surgery) were tested using the HUESAD. The approaching time, total time, and intermediate time (total time--approaching time) were measured and analyzed using the trajectory of the tip of the instrument. The approaching time and total time were significantly shorter in the expert group than in the novice group (p time did not significantly differ between the groups (p > 0.05). The approaching time, which is a component of the total time, is very mportant in the measurement of the total time to assess endoscopic surgical skills. Further, the approaching time was useful for skill assessment by the HUESAD for evaluating the skill of surgeons performing endoscopic surgery.

Evaluating Robotic Surgical Skills Performance Under Distractive Environment Using Objective and Subjective Measures.

Science.gov (United States)

Suh, Irene H; LaGrange, Chad A; Oleynikov, Dmitry; Siu, Ka-Chun

2016-02-01

Distractions are recognized as a significant factor affecting performance in safety critical domains. Although operating rooms are generally full of distractions, the effect of distractions on robot-assisted surgical (RAS) performance is unclear. Our aim was to investigate the effect of distractions on RAS performance using both objective and subjective measures. Fifteen participants performed a knot-tying task using the da Vinci Surgical System and were exposed to 3 distractions: (1) passive distraction entailed listening to noise with a constant heart rate, (2) active distraction included listening to noise and acknowledging a change of random heart rate from 60 to 120 bpm, and (3) interactive distraction consisted of answering math questions. The objective kinematics of the surgical instrument tips were used to evaluate performance. Electromyography (EMG) of the forearm and hand muscles of the participants were collected. The median EMG frequency (EMG(fmed)) and the EMG envelope (EMG(env)) were analyzed. NASA Task Load Index and Fundamentals of Laparoscopic Surgery score were used to evaluate the subjective performance. One-way repeated analysis of variance was applied to examine the effects of distraction on skills performance. Spearman's correlations were conducted to compare objective and subjective measures. Significant distraction effect was found for all objective kinematics measures (P < .05). There were significant distraction effects for EMG measures (EMG(env), P < .004; EMG(fmed), P = .031). Significant distraction effects were also found for subjective measurements. Distraction impairs surgical skills performance and increases muscle work. Understanding how the surgeons cope with distractions is important in developing surgical education. © The Author(s) 2015.

A Novel Telemanipulated Robotic Assistant for Surgical Endoscopy: Preclinical Application to ESD.

Science.gov (United States)

Zorn, Lucile; Nageotte, Florent; Zanne, Philippe; Legner, Andras; Dallemagne, Bernard; Marescaux, Jacques; de Mathelin, Michel

2018-04-01

Minimally invasive surgical interventions in the gastrointestinal tract, such as endoscopic submucosal dissection (ESD), are very difficult for surgeons when performed with standard flexible endoscopes. Robotic flexible systems have been identified as a solution to improve manipulation. However, only a few such systems have been brought to preclinical trials as of now. As a result, novel robotic tools are required. We developed a telemanipulated robotic device, called STRAS, which aims to assist surgeons during intraluminal surgical endoscopy. This is a modular system, based on a flexible endoscope and flexible instruments, which provides 10 degrees of freedom (DoFs). The modularity allows the user to easily set up the robot and to navigate toward the operating area. The robot can then be teleoperated using master interfaces specifically designed to intuitively control all available DoFs. STRAS capabilities have been tested in laboratory conditions and during preclinical experiments. We report 12 colorectal ESDs performed in pigs, in which large lesions were successfully removed. Dissection speeds are compared with those obtained in similar conditions with the manual Anubiscope platform from Karl Storz. We show significant improvements ( ). These experiments show that STRAS (v2) provides sufficient DoFs, workspace, and force to perform ESD, that it allows a single surgeon to perform all the surgical tasks and those performances are improved with respect to manual systems. The concepts developed for STRAS are validated and could bring new tools for surgeons to improve comfort, ease, and performances for intraluminal surgical endoscopy.

Corticotomy-facilitated orthodontics using piezosurgery versus rotary instruments: an experimental study.

Science.gov (United States)

Farid, Karim A; Mostafa, Yehya A; Kaddah, Mohammed A; El-Sharaby, Fouad Aly

2014-10-01

The aim of this study was to evaluate corticotomy-facilitated orthodontics (CFO) using piezosurgery versus conventional rotary instruments. Ten healthy adult male mongrel dogs of comparable age with a complete set of permanent dentition with average weights between 13-17 kilograms were used. CFO using conventional rotary instruments versus piezosurgery was performed on each dog in a split mouth design. For every dog, mandibular 2nd premolar retraction on each side was attempted after extracting 3rd premolars followed by corticotomy-facilitated orthodontics using conventional rotary surgical burs on the left side and an ultrasonic piezosurgery system on the right side of the same animal. Intraoral measurements of the rate of tooth movement were taken with a sliding caliper. Measurements were performed by the same operator at the time of surgery (appliance delivery) and every month for six months. The dogs were sacrificed after six months from initiation of tooth movement to evaluate the amount of tooth movement for both conventional rotary and piezosurgery corticotomy techniques. A statistically significantly higher mean amount of tooth movement for conventional rotary instrument versus the piezosurgery corticotomy technique was observed at all time intervals. Tooth movement was 1.6 times faster when CFO was done using conventional rotary instruments as compared to a piezosurgery device.

Measuring the noble metal and iodine composition of extracted noble metal phase from spent nuclear fuel using instrumental neutron activation analysis

International Nuclear Information System (INIS)

Palomares, R.I.; Dayman, K.J.; Landsberger, S.; Biegalski, S.R.; Soderquist, C.Z.; Casella, A.J.; Brady Raap, M.C.; Schwantes, J.M.

2015-01-01

Masses of noble metal and iodine nuclides in the metallic noble metal phase extracted from spent fuel are measured using instrumental neutron activation analysis. Nuclide presence is predicted using fission yield analysis, and radionuclides are identified and the masses quantified using neutron activation analysis. The nuclide compositions of noble metal phase derived from two dissolution methods, UO 2 fuel dissolved in nitric acid and UO 2 fuel dissolved in ammonium-carbonate and hydrogen-peroxide solution, are compared. - Highlights: • The noble metal phase was chemically extracted from spent nuclear fuel and analyzed non-destructively. • Noble metal phase nuclides and long-lived iodine were identified and quantified using neutron activation analysis. • Activation to shorter-lived radionuclides allowed rapid analysis of long-lived fission products in spent fuel using gamma spectrometry

Surgical applications of three-dimensional printing: a review of the current literature & how to get started

Science.gov (United States)

Hoang, Don; Perrault, David; Stevanovic, Milan

2016-01-01

Three dimensional (3D) printing involves a number of additive manufacturing techniques that are used to build structures from the ground up. This technology has been adapted to a wide range of surgical applications at an impressive rate. It has been used to print patient-specific anatomic models, implants, prosthetics, external fixators, splints, surgical instrumentation, and surgical cutting guides. The profound utility of this technology in surgery explains the exponential growth. It is important to learn how 3D printing has been used in surgery and how to potentially apply this technology. PubMed was searched for studies that addressed the clinical application of 3D printing in all surgical fields, yielding 442 results. Data was manually extracted from the 168 included studies. We found an exponential increase in studies addressing surgical applications for 3D printing since 2011, with the largest growth in craniofacial, oromaxillofacial, and cardiothoracic specialties. The pertinent considerations for getting started with 3D printing were identified and are discussed, including, software, printing techniques, printing materials, sterilization of printing materials, and cost and time requirements. Also, the diverse and increasing applications of 3D printing were recorded and are discussed. There is large array of potential applications for 3D printing. Decreasing cost and increasing ease of use are making this technology more available. Incorporating 3D printing into a surgical practice can be a rewarding process that yields impressive results. PMID:28090512

Towards automatic musical instrument timbre recognition

Science.gov (United States)

Park, Tae Hong

This dissertation is comprised of two parts---focus on issues concerning research and development of an artificial system for automatic musical instrument timbre recognition and musical compositions. The technical part of the essay includes a detailed record of developed and implemented algorithms for feature extraction and pattern recognition. A review of existing literature introducing historical aspects surrounding timbre research, problems associated with a number of timbre definitions, and highlights of selected research activities that have had significant impact in this field are also included. The developed timbre recognition system follows a bottom-up, data-driven model that includes a pre-processing module, feature extraction module, and a RBF/EBF (Radial/Elliptical Basis Function) neural network-based pattern recognition module. 829 monophonic samples from 12 instruments have been chosen from the Peter Siedlaczek library (Best Service) and other samples from the Internet and personal collections. Significant emphasis has been put on feature extraction development and testing to achieve robust and consistent feature vectors that are eventually passed to the neural network module. In order to avoid a garbage-in-garbage-out (GIGO) trap and improve generality, extra care was taken in designing and testing the developed algorithms using various dynamics, different playing techniques, and a variety of pitches for each instrument with inclusion of attack and steady-state portions of a signal. Most of the research and development was conducted in Matlab. The compositional part of the essay includes brief introductions to "A d'Ess Are ," "Aboji," "48 13 N, 16 20 O," and "pH-SQ." A general outline pertaining to the ideas and concepts behind the architectural designs of the pieces including formal structures, time structures, orchestration methods, and pitch structures are also presented.

Wound healing of osteotomy defects prepared with piezo or conventional surgical instruments: a pilot study in rabbits.

Science.gov (United States)

Ma, Li; Mattheos, Nikos; Sun, Yan; Liu, Xi Ling; Yip Chui, Ying; Lang, Niklaus Peter

2015-08-01

The aim of the present study was to evaluate and compare the wound-healing process following osteotomies performed with either conventional rotary burs or piezoelectric surgery in a rabbit model. Two types of osteotomy window defects of the nasal cavities were prepared on the nasal bone of 16 adult New Zealand white rabbits with either a conventional rotary bur or piezo surgery. The defects were covered with a resorbable membrane. Four animals were killed at 1, 2, 3, and 5 weeks after the surgical procedure, respectively. Histological and morphometric evaluations were performed to assess the volumetric density of various tissue components: the blood clot, vascularized structures, provisional matrix, osteoid, mineralized bone, bone debris, residual tissue, and old bone. Significantly more bone debris was found at 1 week in the conventionally-prepared defects compared to the piezo surgically-prepared defects. At 2 and 3 weeks, a newly-formed hard tissue bridge, mainly composed of woven bone, was seen; however, no statistically-significant differences were observed. At 5 weeks, the defects were completely filled with newly-formed bone. The defects prepared by piezo surgery showed a significantly decreased proportion of bone debris at 1 week, compared to conventional rotary bur defect. © 2014 Wiley Publishing Asia Pty Ltd.

[Severe idiopathic scoliosis. Does the approach and the instruments used modify the results?].

Science.gov (United States)

Sánchez-Márquez, J M; Sánchez Pérez-Grueso, F J; Pérez Martín-Buitrago, M; Fernández-Baíllo, N; García-Fernández, A; Quintáns-Rodríguez, J

2014-01-01

The aim of this work is to evaluate and compare the radiographic results and complications of the surgical treatment of adolescents with idiopathic scoliosis greater than 75 degrees, using a double approach (DA) or an isolated posterior approach with hybrid instruments (posterior hybrid [PH]), or with «all-pedicle screws» (posterior screws [PS]). A retrospective review was performed on 69 patients with idiopathic scoliosis greater than 75°, with a follow-up of more than 2 years, to analyze the flexibility of the curves, the correction obtained, and the complications depending on the type of surgery. The Kruskal-Wallis test for non-parametric variables was used for the statistical analysis. There were no statistically significant differences between the 3 patient groups in the pre-surgical Cobb angle values (DA=89°, PH=83°, PS=83°), in the immediate post-surgical (DA=34°, PH=33°, PS=30°), nor at the end of follow-up (DA=36°, PH=36°, PS=33°) (P>.05). The percentage correction (DA=60%, PH=57%, PS=60%) was similar between groups (P>.05). The percentage of complications associated with the procedure was 20.8% in DA, 10% in PH and 20% in PS. Two patients in the PS group showed changes, with no neurological lesions, in the spinal cord monitoring, and one patient in the same group suffered a delayed and transient incomplete lesion. No significant differences were observed in the correction of severe idiopathic scoliosis between patients operated using the double or isolated posterior approach, regardless of the type of instrumentation used. Copyright © 2013 SECOT. Published by Elsevier Espana. All rights reserved.

Bacterial migration through punctured surgical gloves under real surgical conditions

Directory of Open Access Journals (Sweden)

Heidecke Claus-Dieter

2010-07-01

Full Text Available Abstract Background The aim of this study was to confirm recent results from a previous study focussing on the development of a method to measure the bacterial translocation through puncture holes in surgical gloves under real surgical conditions. Methods An established method was applied to detect bacterial migration from the operating site through the punctured glove. Biogel™ double-gloving surgical gloves were used during visceral surgeries over a 6-month period. A modified Gaschen-bag method was used to retrieve organisms from the inner glove, and thus-obtained bacteria were compared with micro-organisms detected by an intra-operative swab. Results In 20 consecutive procedures, 194 gloves (98 outer gloves, 96 inner gloves were examined. The rate of micro-perforations of the outer surgical glove was 10% with a median wearing time of 100 minutes (range: 20-175 minutes. Perforations occurred in 81% on the non-dominant hand, with the index finger most frequently (25% punctured. In six cases, bacterial migration could be demonstrated microbiologically. In 5% (5/98 of outer gloves and in 1% (1/96 of the inner gloves, bacterial migration through micro-perforations was observed. For gloves with detected micro-perforations (n = 10 outer layers, the calculated migration was 50% (n = 5. The minimum wearing time was 62 minutes, with a calculated median wearing time of 71 minutes. Conclusions This study confirms previous results that bacterial migration through unnoticed micro-perforations in surgical gloves does occur under real practical surgical conditions. Undetected perforation of surgical gloves occurs frequently. Bacterial migration from the patient through micro-perforations on the hand of surgeons was confirmed, limiting the protective barrier function of gloves if worn over longer periods.

The Karen instruments for measuring quality of nursing care: construct validity and internal consistency.

Science.gov (United States)

Lindgren, Margareta; Andersson, Inger S

2011-06-01

Valid and reliable instruments for measuring the quality of care are needed for evaluation and improvement of nursing care. Previously developed and evaluated instruments, the Karen-patient and the Karen-personnel based on Donabedian's Structure-Process-Outcome triad (S-P-O triad) had promising content validity, discriminative power and internal consistency. The objective of this study was to further develop the instruments with regard to construct validity and internal consistency. This prospective study was carried out in medical and surgical wards at a hospital in Sweden. A total of 95 patients and 120 personnel were included. The instruments were tested for construct validity by performing factor analyses in two steps and for internal consistency using Cronbach's alpha coefficient. The first confirmatory factor analyses, with a pre-determined three-factor solution did not load well according to the S-P-O triad, but the second exploratory factor analysis with a six-factor solution appeared to be more coherent and the distribution of variables seemed to be logical. The reliability, i.e. internal consistency, was good in both factor analyses. The Karen-patient and the Karen-personnel instruments have achieved acceptable levels of construct validity. The internal consistency of the instruments is good. This indicates that the instruments may be suitable to use in clinical practice for measuring the quality of nursing care.

Prospective data collection and analysis of perforations and tears of latex surgical gloves during primary endoprosthetic surgeries

Directory of Open Access Journals (Sweden)

Zaatreh, Sarah

2016-12-01

Full Text Available Introduction: Surgical gloves are used to prevent contamination of the patient and the hospital staff with pathogens. The aim of this study was to examine the actual effectiveness of gloves by examining the damage (perforations, tears to latex gloves during surgery in the case of primary hip and knee prosthesis implantation. Materials and methods: Latex surgical gloves used by surgeons for primary hip and knee replacement surgeries were collected directly after the surgery and tested using the watertightness test according to ISO EN 455-1:2000.Results: 540 gloves were collected from 104 surgeries. In 32.7% of surgeries at least one glove was damaged. Of all the gloves collected, 10.9% were damaged, mainly on the index finger. The size of the perforations ranged from ≤1 mm to over 5 mm. The surgeon’s glove size was the only factor that significantly influenced the occurrence of glove damage. Surgeon training level, procedure duration, and the use of bone cement had no significant influence.Conclusions: Our results highlight the high failure rate of surgical gloves. This has acute implications for glove production, surgical practice, and hygiene guidelines. Further studies are needed to detect the surgical steps, surface structures, and instruments that pose an increased risk for glove damage.

Prospective data collection and analysis of perforations and tears of latex surgical gloves during primary endoprosthetic surgeries.

Science.gov (United States)

Zaatreh, Sarah; Enz, Andreas; Klinder, Annett; König, Tony; Mittelmeier, Lena; Kundt, Günther; Mittelmeier, Wolfram

2016-01-01

Introduction: Surgical gloves are used to prevent contamination of the patient and the hospital staff with pathogens. The aim of this study was to examine the actual effectiveness of gloves by examining the damage (perforations, tears) to latex gloves during surgery in the case of primary hip and knee prosthesis implantation. Materials and methods: Latex surgical gloves used by surgeons for primary hip and knee replacement surgeries were collected directly after the surgery and tested using the watertightness test according to ISO EN 455-1:2000. Results: 540 gloves were collected from 104 surgeries. In 32.7% of surgeries at least one glove was damaged. Of all the gloves collected, 10.9% were damaged, mainly on the index finger. The size of the perforations ranged from ≤1 mm to over 5 mm. The surgeon's glove size was the only factor that significantly influenced the occurrence of glove damage. Surgeon training level, procedure duration, and the use of bone cement had no significant influence. Conclusions: Our results highlight the high failure rate of surgical gloves. This has acute implications for glove production, surgical practice, and hygiene guidelines. Further studies are needed to detect the surgical steps, surface structures, and instruments that pose an increased risk for glove damage.

Prospective data collection and analysis of perforations and tears of latex surgical gloves during primary endoprosthetic surgeries

Science.gov (United States)

Zaatreh, Sarah; Enz, Andreas; Klinder, Annett; König, Tony; Mittelmeier, Lena; Kundt, Günther; Mittelmeier, Wolfram

2016-01-01

Introduction: Surgical gloves are used to prevent contamination of the patient and the hospital staff with pathogens. The aim of this study was to examine the actual effectiveness of gloves by examining the damage (perforations, tears) to latex gloves during surgery in the case of primary hip and knee prosthesis implantation. Materials and methods: Latex surgical gloves used by surgeons for primary hip and knee replacement surgeries were collected directly after the surgery and tested using the watertightness test according to ISO EN 455-1:2000. Results: 540 gloves were collected from 104 surgeries. In 32.7% of surgeries at least one glove was damaged. Of all the gloves collected, 10.9% were damaged, mainly on the index finger. The size of the perforations ranged from ≤1 mm to over 5 mm. The surgeon’s glove size was the only factor that significantly influenced the occurrence of glove damage. Surgeon training level, procedure duration, and the use of bone cement had no significant influence. Conclusions: Our results highlight the high failure rate of surgical gloves. This has acute implications for glove production, surgical practice, and hygiene guidelines. Further studies are needed to detect the surgical steps, surface structures, and instruments that pose an increased risk for glove damage. PMID:28066701

Instrumentation and process control for fossil demonstration plants. Quarterly technical progress report, April--June 1977

Energy Technology Data Exchange (ETDEWEB)

LeSage, L.G.

1977-07-01

Work has been performed on updating the study of the state-of-the-art of instrumentation for Fossil Demonstration Plants (FDP), development of mass-flow and other on-line instruments for FDP, process control analysis for FDP, and organization of a symposium on instrumentation and control for FDP. A Solids/Gas Flow Test Facility (S/GFTF) under construction for instrument development, testing, evaluation, and calibration is described. The development work for several mass-flow and other on-line instruments is described: acoustic flowmeter, capacitive density flowmeter, neutron activation flowmeter and composition analysis system, gamma ray correlation flowmeter, optical flowmeter, and capacitive liquid interface level meter.

Surgical experts: born or made?

Science.gov (United States)

Sadideen, Hazim; Alvand, Abtin; Saadeddin, Munir; Kneebone, Roger

2013-01-01

The concept of surgical expertise and the processes involved in its development are topical, and there is a constant drive to identify reliable measures of expert performance in surgery. This review explores the notion of whether surgical experts are "born" or "made", with reference to educational theory and pertinent literature. Peer-reviewed publications, books, and online resources on surgical education, expertise and training were reviewed. Important themes and aspects of expertise acquisition were identified in order to better understand the concept of a surgical expert. The definition of surgical expertise and several important aspects of its development are highlighted. Innate talent plays an important role, but is insufficient on its own to produce a surgical expert. Multiple theories that explore motor skill acquisition and memory are relevant, and Ericsson's theory of the development of competence followed by deliberate self-practice has been especially influential. Psychomotor and non-technical skills are necessary for progression in the current climate in light of our training curricula; surgical experts are adaptive experts who excel in these. The literature suggests that surgical expertise is reached through practice; surgical experts are made, not born. A deeper understanding of the nature of expert performance and its development will ensure that surgical education training programmes are of the highest possible quality. Surgical educators should aim to develop an expertise-based approach, with expert performance as the benchmark. Copyright © 2013 Surgical Associates Ltd. Published by Elsevier Ltd. All rights reserved.

75 FR 82372 - Application(s) for Duty-Free Entry of Scientific Instruments

Science.gov (United States)

2010-12-30

... Minnesota School of Dentistry, 6-150 MoosT, 515 Delaware St., S E, Minneapolis, MN 55455. Instrument: Dental... biofilm of dental decay in children. This custom made imaging system will image under resin composite...

Preoperative embolization in surgical treatment of spinal metastases

DEFF Research Database (Denmark)

Clausen, Caroline; Dahl, Benny; Frevert, Susanne Christiansen

2015-01-01

PURPOSE: To assess whether preoperative transcatheter arterial embolization of spinal metastases reduces blood loss, the need for transfusion with allogeneic red blood cells (RBCs), and surgery time in the surgical treatment of patients with symptomatic metastatic spinal cord compression. MATERIALS......L) versus 902 mL (SD, 416 mL). CONCLUSIONS: Preoperative embolization in patients with symptomatic spinal metastasis independent of primary tumor diagnosis did not reduce intraoperative blood loss and allogeneic RBC transfusion significantly but did reduce the surgery time. A small reduction...... instrumentation and randomly assigned to either preoperative embolization (n = 23) or a control group (n = 22). The primary outcome was intraoperative blood loss. Secondary outcomes were perioperative blood loss, allogeneic RBC transfusion, and surgery time. Analyses were performed by intention-to-treat. RESULTS...

Breast milk macronutrient composition after bariatric surgery.

Science.gov (United States)

Jans, Goele; Matthys, Christophe; Lannoo, Matthias; Van der Schueren, Bart; Devlieger, Roland

2015-05-01

Breast milk samples from 12 lactating women with bariatric surgery were investigated by comparing the macronutrient and energy content with samples from 36 non-surgical controls. Samples were analyzed with the Human Milk Analyzer and the maternal diet 24 h prior to sampling with a food record. A higher fat, energy, and a slightly higher carbohydrate milk content was found in the surgical group compared to the non-surgical group (3.0 ± 0.7 versus 2.2 ± 0.9 g/100 ml, P = 0.008; 61.0 ± 7.2 versus 51.7 ± 9 kcal/100 ml, P = 0.002; and 6.6 ± 0.6 versus 6.3 ± 0.4 g/100 ml, P = 0.045, respectively). No correlations and no strong explanatory variance were found between milk macronutrient composition and corresponding maternal dietary intake. The nutritional value of breast milk after bariatric surgery appears to be at least as high as in non-surgical controls.

Lumbar lordosis restoration following single-level instrumented fusion comparing 4 commonly used techniques.

Science.gov (United States)

Dimar, John R; Glassman, Steven D; Vemuri, Venu M; Esterberg, Justin L; Howard, Jennifer M; Carreon, Leah Y

2011-11-09

A major sequelae of lumbar fusion is acceleration of adjacent-level degeneration due to decreased lumbar lordosis. We evaluated the effectiveness of 4 common fusion techniques in restoring lordosis: instrumented posterolateral fusion, translumbar interbody fusion, anteroposterior fusion with posterior instrumentation, and anterior interbody fusion with lordotic threaded (LT) cages (Medtronic Sofamor Danek, Memphis, Tennessee). Radiographs were measured preoperatively, immediately postoperatively, and a minimum of 6 months postoperatively. Parameters measured included anterior and posterior disk space height, lumbar lordosis from L3 to S1, and surgical level lordosis.No significant difference in demographics existed among the 4 groups. All preoperative parameters were similar among the 4 groups. Lumbar lordosis at final follow-up showed no difference between the anteroposterior fusion with posterior instrumentation, translumbar interbody fusion, and LT cage groups, although the posterolateral fusion group showed a significant loss of lordosis (-10°) (Plordosis and showed maintenance of anterior and posterior disk space height postoperatively compared with the other groups. Instrumented posterolateral fusion produces a greater loss of lordosis compared with anteroposterior fusion with posterior instrumentation, translumbar interbody fusion, and LT cages. Maintenance of lordosis and anterior and posterior disk space height is significantly better with anterior interbody fusion with LT cages. Copyright 2011, SLACK Incorporated.

Instrumentness for Creativity - Mediation, Materiality & Metonymy

DEFF Research Database (Denmark)

Bertelsen, Olav Wedege; Breinbjerg, Morten; Pold, Søren

2007-01-01

in use beyond what is initially designed for. The paper performs a conceptual investigation into qualities in software interfaces that support creativity, supported by analysis of, and interviews with, musical composers. Instrumentness is explained through discussions of materiality and metonymy...... as central strategies for computer mediated creativity. The paper is contributing to an investigation of the aesthetics of use in relation to software, pointing to alternative values, differing from traditional usability, which are also relevant in creative work outside art and music composition....

Assessment of Surgical and Trauma Capacity in Potosí, Bolivia.

Science.gov (United States)

Blair, Kevin J; Boeck, Marissa A; Gallardo Barrientos, José Luis; Hidalgo López, José Luis; Helenowski, Irene B; Nwomeh, Benedict C; Shapiro, Michael B; Swaroop, Mamta

Scaling up surgical and trauma care in low- and middle-income countries could prevent nearly 2 million annual deaths. Various survey instruments exist to measure surgical and trauma capacity, including Personnel, Infrastructure, Procedures, Equipment, and Supplies (PIPES) and International Assessment of Capacity for Trauma (INTACT). We sought to evaluate surgical and trauma capacity in the Bolivian department of Potosí using a combined PIPES and INTACT tool, with additional questions to further inform intervention targets. In June and July 2014 a combined PIPES and INTACT survey was administered to 20 government facilities in Potosí with a minimum of 1 operating room: 2 third-level, 10 second-level, and 8 first-level facilities. A surgeon, head physician, director, or obstetrician-gynecologist completed the survey. Additional personnel responded to 4 short-answer questions. Survey items were divided into subsections, and PIPES and INTACT indices calculated. Medians were compared via Wilcoxon rank sum and Kruskal-Wallis tests. Six of 20 facilities were located in the capital city and designated urban. Urban establishments had higher median PIPES (8.5 vs 6.7, P = .11) and INTACT (8.5 vs 6.9, P = .16) indices compared with rural. More than half of surgeons and anesthesiologists worked in urban hospitals. Urban facilities had higher median infrastructure and procedure scores compared with rural. Fifty-three individuals completed short-answer questions. Training was most desired in laparoscopic surgery and trauma management; less than half of establishments reported staff with trauma training. Surgical and trauma capacity in Potosí was most limited in personnel, infrastructure, and procedures at rural facilities, with greater personnel deficiencies than previously reported. Interventions should focus on increasing the number of surgical and anesthesia personnel in rural areas, with a particular focus on the reported desire for trauma management training. Results

Direct concurrent comparison of multiple pediatric acute asthma scoring instruments.

Science.gov (United States)

Johnson, Michael D; Nkoy, Flory L; Sheng, Xiaoming; Greene, Tom; Stone, Bryan L; Garvin, Jennifer

2017-09-01

Appropriate delivery of Emergency Department (ED) treatment to children with acute asthma requires clinician assessment of acute asthma severity. Various clinical scoring instruments exist to standardize assessment of acute asthma severity in the ED, but their selection remains arbitrary due to few published direct comparisons of their properties. Our objective was to test the feasibility of directly comparing properties of multiple scoring instruments in a pediatric ED. Using a novel approach supported by a composite data collection form, clinicians categorized elements of five scoring instruments before and after initial treatment for 48 patients 2-18 years of age with acute asthma seen at the ED of a tertiary care pediatric hospital ED from August to December 2014. Scoring instruments were compared for inter-rater reliability between clinician types and their ability to predict hospitalization. Inter-rater reliability between clinician types was not different between instruments at any point and was lower (weighted kappa range 0.21-0.55) than values reported elsewhere. Predictive ability of most instruments for hospitalization was higher after treatment than before treatment (p < 0.05) and may vary between instruments after treatment (p = 0.054). We demonstrate the feasibility of comparing multiple clinical scoring instruments simultaneously in ED clinical practice. Scoring instruments had higher predictive ability for hospitalization after treatment than before treatment and may differ in their predictive ability after initial treatment. Definitive conclusions about the best instrument or meaningful comparison between instruments will require a study with a larger sample size.

Three-dimensional modeling of physiological tremor for hand-held surgical robotic instruments.

Science.gov (United States)

Tatinati, Sivanagaraja; Yan Naing Aye; Pual, Anand; Wei Tech Ang; Veluvolu, Kalyana C

2016-08-01

Hand-held robotic instruments are developed to compensate physiological tremor in real-time while augmenting the required precision and dexterity into normal microsurgical work-flow. The hardware (sensors and actuators) and software (causal linear filters) employed for tremor identification and filtering introduces time-varying unknown phase-delay that adversely affects the device performance. The current techniques that focus on three-dimensions (3D) tip position control involves modeling and canceling the tremor in 3-axes (x, y, and z axes) separately. Our analysis with the tremor data recorded from surgeons and novice subjects show that there exists significant correlation in tremor motion across the dimensions. Motivated by this, a new multi-dimensional modeling approach based on extreme learning machines (ELM) is proposed in this paper to correct the phase delay and to accurately model tremulous motion in three dimensions simultaneously. A study is conducted with tremor data recorded from the microsurgeons to analyze the suitability of proposed approach.

Implementation of an ultrasonic instrument for simultaneous mixture and flow analysis of binary gas systems

Energy Technology Data Exchange (ETDEWEB)

Alhroob, M.; Boyd, G.; Hasib, A.; Pearson, B.; Srauss, M.; Young, J. [Department of Physics and Astronomy, University of Oklahoma, Norman, OK 73019, (United States); Bates, R.; Bitadze, A. [School of Physics and Astronomy, University of Glasgow, G12 8QQ, (United Kingdom); Battistin, M.; Berry, S.; Bonneau, P.; Botelho-Direito, J.; Bozza, G.; Crespo-Lopez, O.; DiGirolamo, B.; Favre, G.; Godlewski, J.; Lombard, D.; Zwalinski, L. [CERN, 1211 Geneva 23, (Switzerland); Bousson, N.; Hallewell, G.; Mathieu, M.; Rozanov, A. [Centre de Physique des Particules de Marseille, 163 Avenue de Luminy, 13288 Marseille Cedex 09, (France); Deterre, C.; O' Rourke, A. [Deutsches Elektronen-Synchrotron, Notkestrasse 85, D-22607 Hamburg, (Germany); Doubek, M.; Vacek, V. [Czech Technical University, Technick 4, 166 07 Prague 6, (Czech Republic); Degeorge, C. [Physics Department, Indiana University, Bloomington, IN 47405, (United States); Katunin, S. [B.P. Konstantinov Petersburg Nuclear Physics Institute (PNPI), 188300 St. Petersburg, (Russian Federation); Langevin, N. [Institut Universitaire de Technologie of Marseille, University of Aix-Marseille, 142 Traverse Charles Susini, 13013 Marseille, (France); McMahon, S. [Rutherford Appleton Laboratory - Science and Technology Facilities Council, Harwell Science and Innovation Campus, Didcot OX11 OQX, (United Kingdom); Nagai, K. [Department of Physics, Oxford University, Oxford OX1 3RH, (United Kingdom); Robinson, D. [Department of Physics and Astronomy, University of Cambridge, (United Kingdom); Rossi, C. [INFN - Genova, Via Dodecaneso 33, 16146 Genova, (Italy)

2015-07-01

Precision ultrasonic measurements in binary gas systems provide continuous real-time monitoring of mixture composition and flow. Using custom micro-controller-based electronics, we have developed an ultrasonic instrument, with numerous potential applications, capable of making continuous high-precision sound velocity measurements. The instrument measures sound transit times along two opposite directions aligned parallel to - or obliquely crossing - the gas flow. The difference between the two measured times yields the gas flow rate while their average gives the sound velocity, which can be compared with a sound velocity vs. molar composition look-up table for the binary mixture at a given temperature and pressure. The look-up table may be generated from prior measurements in known mixtures of the two components, from theoretical calculations, or from a combination of the two. We describe the instrument and its performance within numerous applications in the ATLAS experiment at the CERN Large Hadron Collider (LHC). The instrument can be of interest in other areas where continuous in-situ binary gas analysis and flowmetry are required. (authors)

Global curriculum in surgical oncology.

Science.gov (United States)

Are, C; Berman, R S; Wyld, L; Cummings, C; Lecoq, C; Audisio, R A

2016-06-01

The significant global variations in surgical oncology training paradigms can have a detrimental effect on tackling the rising global cancer burden. While some variations in training are essential to account for the differences in types of cancer and biology, the fundamental principles of providing care to a cancer patient remain the same. The development of a global curriculum in surgical oncology with incorporated essential standards could be very useful in building an adequately trained surgical oncology workforce, which in turn could help in tackling the rising global cancer burden. The leaders of the Society of Surgical Oncology and European Society of Surgical Oncology convened a global curriculum committee to develop a global curriculum in surgical oncology. A global curriculum in surgical oncology was developed to incorporate the required domains considered to be essential in training a surgical oncologist. The curriculum was constructed in a modular fashion to permit flexibility to suit the needs of the different regions of the world. Similarly, recognizing the various sociocultural, financial and cultural influences across the world, the proposed curriculum is aspirational and not mandatory in intent. A global curriculum was developed which may be considered as a foundational scaffolding for training surgical oncologists worldwide. It is envisioned that this initial global curriculum will provide a flexible and modular scaffolding that can be tailored by individual countries or regions to train surgical oncologists in a way that is appropriate for practice in their local environment. Copyright © 2016 Society of Surgical Oncology, European Society of Surgical Oncology. Published by Elsevier Ltd.. All rights reserved.

Scoliosis Surgery in Cystic Fibrosis: Surgical Considerations and the Multidisciplinary Approach of a Rare Case

Directory of Open Access Journals (Sweden)

George I. Mataliotakis

2016-01-01

Full Text Available Spinal deformity in patients with cystic fibrosis (CF is usually mild requiring no treatment. These patients are rarely considered as surgical candidates for scoliosis correction, as the pulmonary condition and other comorbidities increase the risk of general anaesthesia and recovery. This paper reviews all the literature up to date with regard to scoliosis in patients with CF and reports this unique case of a 14-year-old Caucasian girl with progressive scoliosis, who was treated surgically at the age of 17. She underwent a posterior spinal fusion T2-L3 with the use of unilateral segmental instrumentation. Preoperative workup included respiratory, cardiac, anaesthetic, endocrine, and dietician reviews, as well as bone density optimisation with zoledronic acid and prophylactic antibiotics. Surgical time was 150 minutes and intraoperative blood loss was 47% of total blood volume. Postoperative intensive care included noninvasive ventilation, antibiotic cover, pain management, chest physiotherapy, pancreatic enzyme supplementation, and nutritional support. She was discharged on day 9. At follow-up she had a good cosmetic outcome, no complaints of her back, and stable respiratory function. Multidisciplinary perioperative care and meticulous surgical technique may reduce the associated risks of major surgery in CF patients, while achieving adequate deformity correction and a good functional outcome.

Capping of the radicular exposed surface (part II). Surgical and not surgical treatment

OpenAIRE

Grados Pomarino, Sixto; Estrada, Andrew Alejandro; Maetahara Rubio, Denis Miguel; Guzmán Vera, Yanina Sara; Tello Barbarán, Javier

2014-01-01

The gingival recession treatment can be made surgical1y with a high predictability of success due to the great advance during the last ones of the mucogingival surgical techniques. The use of connective grafts in coverage of recessions has obtained high rates of success reason why these procedures are common within the modern periodontal surgical practice. Knowing that all patients do not accept the surgical treatment, many investigators have come studying the possibility of treating non-surg...

Models and error analyses of measuring instruments in accountability systems in safeguards control

International Nuclear Information System (INIS)

Dattatreya, E.S.

1977-05-01

Essentially three types of measuring instruments are used in plutonium accountability systems: (1) the bubblers, for measuring the total volume of liquid in the holding tanks, (2) coulometers, titration apparatus and calorimeters, for measuring the concentration of plutonium; and (3) spectrometers, for measuring isotopic composition. These three classes of instruments are modeled and analyzed. Finally, the uncertainty in the estimation of total plutonium in the holding tank is determined

Raven-II: an open platform for surgical robotics research.

Science.gov (United States)

Hannaford, Blake; Rosen, Jacob; Friedman, Diana W; King, Hawkeye; Roan, Phillip; Cheng, Lei; Glozman, Daniel; Ma, Ji; Kosari, Sina Nia; White, Lee

2013-04-01

The Raven-II is a platform for collaborative research on advances in surgical robotics. Seven universities have begun research using this platform. The Raven-II system has two 3-DOF spherical positioning mechanisms capable of attaching interchangeable four DOF instruments. The Raven-II software is based on open standards such as Linux and ROS to maximally facilitate software development. The mechanism is robust enough for repeated experiments and animal surgery experiments, but is not engineered to sufficient safety standards for human use. Mechanisms in place for interaction among the user community and dissemination of results include an electronic forum, an online software SVN repository, and meetings and workshops at major robotics conferences.

Cometary Coma Chemical Composition (C4) Mission

Science.gov (United States)

Carle, Glenn C.; Clark, Benton C.; Knocke, Philip C.; OHara, Bonnie J.; Adams, Larry; Niemann, Hasso B.; Alexander, Merle; Veverka, Joseph; Goldstein, Raymond; Huebner, Walter;

The robustness of DLP hyperspectral imaging for clinical and surgical utility

Science.gov (United States)

Zuzak, Karel J.; Wehner, Eleanor; Rao, Shekar; Litorja, Maritoni; Allen, David W.; Singer, Mike; Purdue, Gary; Ufret-Vincenty, Rafael; White, Jonathan; Cadeddu, Jeffrey; Livingston, Edward

2010-02-01

Utilizing seed funding from Texas Instruments, a DLP (R)Hyperspectral Imaging system was developed by integrating a focal-plane array, FPA, detector with a DLP based spectrally tunable illumination source. Software is used to synchronize FPA with DLP hardware for collecting spectroscopic images as well as running novel illumination schemes and chemometric deconvolution methods for producing gray scale or color encoded images visualizing molecular constituents at video rate. Optical spectra and spectroscopic image data of a variety of live human organs and diseased tissue collected from patients during surgical procedures and clinical visits being cataloged for a database will be presented.

Abortion - surgical - aftercare

Science.gov (United States)

... this page: //medlineplus.gov/ency/patientinstructions/000658.htm Abortion - surgical - aftercare To use the sharing features on ... please enable JavaScript. You have had a surgical abortion. This is a procedure that ends pregnancy by ...

Rules of Origin as Commercial Policy Instruments.

OpenAIRE

Falvey, Rod; Reed, Geoff

1997-01-01

This article examines the role of rules of origin as a commercial policy instrument that targets the input composition of imports. Using a three-country, partial equilibrium structure, we demonstrate conditions under which the imposition of a binding rule will be welfare improving for an importer facing competitive export suppliers. We further show that employing rules of origin in this way would be complementary to, rather than a substitute for, conventional optimal tariffs. Copyright Econom...

Extended score interval in the assessment of basic surgical skills.

Science.gov (United States)

Acosta, Stefan; Sevonius, Dan; Beckman, Anders

2015-01-01

The Basic Surgical Skills course uses an assessment score interval of 0-3. An extended score interval, 1-6, was proposed by the Swedish steering committee of the course. The aim of this study was to analyze the trainee scores in the current 0-3 scored version compared to a proposed 1-6 scored version. Sixteen participants, seven females and nine males, were evaluated in the current and proposed assessment forms by instructors, observers, and learners themselves during the first and second day. In each assessment form, 17 tasks were assessed. The inter-rater reliability between the current and the proposed score sheets were evaluated with intraclass correlation (ICC) with 95% confidence intervals (CI). The distribution of scores for 'knot tying' at the last time point and 'bowel anastomosis side to side' given by the instructors in the current assessment form showed that the highest score was given in 31 and 62%, respectively. No ceiling effects were found in the proposed assessment form. The overall ICC between the current and proposed score sheets after assessment by the instructors increased from 0.38 (95% CI 0.77-0.78) on Day 1 to 0.83 (95% CI 0.51-0.94) on Day 2. A clear ceiling effect of scores was demonstrated in the current assessment form, questioning its validity. The proposed score sheet provides more accurate scores and seems to be a better feedback instrument for learning technical surgical skills in the Basic Surgical Skills course.

Effect of Incremental Endoscopic Maxillectomy on Surgical Exposure of the Pterygopalatine and Infratemporal Fossae.

Science.gov (United States)

Upadhyay, Smita; Dolci, Ricardo L L; Buohliqah, Lamia; Fiore, Mariano E; Ditzel Filho, Leo F S; Prevedello, Daniel M; Otto, Bradley A; Carrau, Ricardo L

2016-02-01

Objective Access to the pterygopalatine and infratemporal fossae presents a significant surgical challenge, owing to their deep-seated location and complex neurovascular anatomy. This study elucidates the benefits of incremental medial maxillectomies to access this region. We compared access to the medial aspect of the infratemporal fossa provided by medial maxillectomy, anteriorly extended medial maxillectomy, endoscopic Denker approach (i.e., Sturmann-Canfield approach), contralateral transseptal approach, and the sublabial anterior maxillotomy (SAM). Methods We studied 10 cadaveric specimens (20 sides) dissecting the pterygopalatine and infratemporal fossae bilaterally. Radius of access was calculated using a navigation probe aligned with the endoscopic line of sight. Area of exposure was calculated as the area removed from the posterior wall of maxillary sinus. Surgical freedom was calculated by computing the working area at the proximal end of the instrument with the distal end fixed at a target. Results The endoscopic Denker approach offered a superior area of exposure (8.46 ± 1.56 cm(2)) and superior surgical freedom. Degree of lateral access with the SAM approach was similar to that of the Denker. Conclusion Our study suggests that an anterior extension of the medial maxillectomy or a cross-court approach increases both the area of exposure and surgical freedom. Further increases can be seen upon progression to a Denker approach.

Single incision laparoscopic cholecystectomy using the one-incision three-trocar technique with all straight instruments: how I do it?

Institute of Scientific and Technical Information of China (English)

Hongyi Cui

2011-01-01

Single incision laparoscopic surgery (SILS) is a novel minimally invasive surgical technique that is gaining popularity around the world.One of the most commonly performed procedures is single incision laparoscopic cholecystectomy (SILC).Most reported techniques utilize special purpose-made access port and articulating instruments,rendering the procedure costly and difficult to learn.This article provides a stepwise description of SILC technique using all straight instruments without the need for a special port.It aims to shorten the learning curve for surgeons wishing to adopt a safe and cost-effective SILC technique to their practice.

Development and validation of a composite scoring system for robot-assisted surgical training--the Robotic Skills Assessment Score.

Science.gov (United States)

Chowriappa, Ashirwad J; Shi, Yi; Raza, Syed Johar; Ahmed, Kamran; Stegemann, Andrew; Wilding, Gregory; Kaouk, Jihad; Peabody, James O; Menon, Mani; Hassett, James M; Kesavadas, Thenkurussi; Guru, Khurshid A

2013-12-01

A standardized scoring system does not exist in virtual reality-based assessment metrics to describe safe and crucial surgical skills in robot-assisted surgery. This study aims to develop an assessment score along with its construct validation. All subjects performed key tasks on previously validated Fundamental Skills of Robotic Surgery curriculum, which were recorded, and metrics were stored. After an expert consensus for the purpose of content validation (Delphi), critical safety determining procedural steps were identified from the Fundamental Skills of Robotic Surgery curriculum and a hierarchical task decomposition of multiple parameters using a variety of metrics was used to develop Robotic Skills Assessment Score (RSA-Score). Robotic Skills Assessment mainly focuses on safety in operative field, critical error, economy, bimanual dexterity, and time. Following, the RSA-Score was further evaluated for construct validation and feasibility. Spearman correlation tests performed between tasks using the RSA-Scores indicate no cross correlation. Wilcoxon rank sum tests were performed between the two groups. The proposed RSA-Score was evaluated on non-robotic surgeons (n = 15) and on expert-robotic surgeons (n = 12). The expert group demonstrated significantly better performance on all four tasks in comparison to the novice group. Validation of the RSA-Score in this study was carried out on the Robotic Surgical Simulator. The RSA-Score is a valid scoring system that could be incorporated in any virtual reality-based surgical simulator to achieve standardized assessment of fundamental surgical tents during robot-assisted surgery. Copyright © 2013 Elsevier Inc. All rights reserved.

Surgical competence.

Science.gov (United States)

Patil, Nivritti G; Cheng, Stephen W K; Wong, John

2003-08-01

Recent high-profile cases have heightened the need for a formal structure to monitor achievement and maintenance of surgical competence. Logbooks, morbidity and mortality meetings, videos and direct observation of operations using a checklist, motion analysis devices, and virtual reality simulators are effective tools for teaching and evaluating surgical skills. As the operating theater is also a place for training, there must be protocols and guidelines, including mandatory standards for supervision, to ensure that patient care is not compromised. Patients appreciate frank communication and honesty from surgeons regarding their expertise and level of competence. To ensure that surgical competence is maintained and keeps pace with technologic advances, professional registration bodies have been promoting programs for recertification. They evaluate performance in practice, professional standing, and commitment to ongoing education.

Ontogeny of a surgical technique: Robotic kidney transplantation with regional hypothermia.

Science.gov (United States)

Sood, Akshay; McCulloch, Peter; Dahm, Philipp; Ahlawat, Rajesh; Jeong, Wooju; Bhandari, Mahendra; Menon, Mani

2016-01-01

Innovation is a hallmark of surgical practice. It is generally accepted that a new procedure will undergo technical changes during its evolution; however, quantitative accounts of the process are limited. Multiple groups, including our own, have recently described a minimally-invasive approach to conventional kidney transplantation (KT) operation. Unique to our experience is a structured development of the technique within the confines of a safe surgical innovation framework - the IDEAL framework (idea, development, exploration, assessment, long-term monitoring; stages 0-4). We here provide a first-hand narrative of the progress of robotic KT operation from preclinical trial to clinical application. Overall, 54 patients underwent robotic KT with regional hypothermia successfully. Major technical changes including selection of optimal patient position (flank vs. lithotomy), robotic instrumentation, vascular occlusion method (bulldog vs. tourniquet) and suture material (prolene vs. GoreTex) occurred early during the procedure development (IDEAL stage 0, preclinical). Minor technical changes such as utilization of the aortic punch for arteriotomy (case 3), use of barbed suture during ureteroneocystostomy (case 6) and extraperitonealization of the graft kidney (case 6) that increased the efficiency and safety of the procedure continued throughout procedure development (IDEAL stages 1-2, clinical stages). We demonstrate that a surgical technique evolves continually; although, the majority of technical alterations occur early in the life-cycle of the procedure. Development of a new technique within the confines a structured surgical innovation framework allows for evidence based progression of the technique and may minimize the risk of harm to the patient. Copyright © 2015 IJS Publishing Group Limited. Published by Elsevier Ltd. All rights reserved.

Inspector-instrument interface in portable NDA instrumentation

International Nuclear Information System (INIS)

Halbig, J.K.; Klosterbuer, S.F.

1981-01-01

Recent electronics technology advances make it possible to design sophisticated instruments in small packages for convenient field implementation. An inspector-instrument interface design that allows communication of procedures, responses, and results between the instrument and user is presented. This capability has been incorporated into new spent-fuel instrumentation and a battery-powered multichannel analyzer

Inspector-instrument interface in portable NDA instrumentation

International Nuclear Information System (INIS)

Halbig, J.K.; Klosterbuer, S.F.

1981-01-01

Recent electronics technology advances make it possible to design sophisticated instruments in small packages for convenient field implementation. This report describes an inspector-instrument interface design which allows communication of procedures, responses, and results between the instrument and user. The interface has been incorporated into new spent-fuel instrumentation and a battery-powered multichannel analyzer

L5 vertebrectomy for the surgical treatment of tumoral and traumatic lesions of L5 vertebra

Directory of Open Access Journals (Sweden)

Tuncay Kaner

2012-02-01

Full Text Available We retrospectively reviewed the clinical characteristics and the surgical results of seven patients treated with L5 vertebrectomy. The pathologies, clinical characteristics, preoperative and postoperative radiological findings, surgical techniques, and instrumentation for seven patients operated on between 1998 and 2009 are presented in this article. Biopsies were performed on all patients except those involving trauma. Patients were followed up at three-month intervals in the first year, at 6- month intervals in the second year, and on a regular basis afterward. One patient had a traumatic L5 burst fracture; the other six had tumoral pathologies in the L5 vertebrae. One tumoral lesion was a chordoma, another was a hemangioma, and the remaining four were metastatic lesions. Radiotherapy and chemotherapy were performed for the metastatic tumor patients during the postoperative period. Patients with renal cancer and chordoma survived for 3 years; patients with lung cancer and bladder cancer survived for 1 year; and patients with breast cancer survived for 16 months. The lumbosacral region presents significant stabilization problems because of the presence of sacral slope. In our opinion, if the lesion involves only the L5 vertebra, anterior cage-filled bone cement or bone graft should be performed, as dictated by the pathology and posterior transpedicular instrumentation. If the lesion involves the L4 vertebra or the sacrum and the L5 vertebra, the instrumentation can be extended to cover other segments with sacral attachments. The present cases involved only L5 vertebra and treatment with short-segment stabilization covering the anterior and posterior columns.

SAGES TAVAC safety and effectiveness analysis: da Vinci ® Surgical System (Intuitive Surgical, Sunnyvale, CA).

Science.gov (United States)

Tsuda, Shawn; Oleynikov, Dmitry; Gould, Jon; Azagury, Dan; Sandler, Bryan; Hutter, Matthew; Ross, Sharona; Haas, Eric; Brody, Fred; Satava, Richard

2015-10-01

The da Vinci(®) Surgical System (Intuitive Surgical, Sunnyvale, CA, USA) is a computer-assisted (robotic) surgical system designed to enable and enhance minimally invasive surgery. The Food and Drug Administration (FDA) has cleared computer-assisted surgical systems for use by trained physicians in an operating room environment for laparoscopic surgical procedures in general, cardiac, colorectal, gynecologic, head and neck, thoracic and urologic surgical procedures. There are substantial numbers of peer-reviewed papers regarding the da Vinci(®) Surgical System, and a thoughtful assessment of evidence framed by clinical opinion is warranted. The SAGES da Vinci(®) TAVAC sub-committee performed a literature review of the da Vinci(®) Surgical System regarding gastrointestinal surgery. Conclusions by the sub-committee were vetted by the SAGES TAVAC Committee and SAGES Executive Board. Following revisions, the document was evaluated by the TAVAC Committee and Executive Board again for final approval. Several conclusions were drawn based on expert opinion organized by safety, efficacy, and cost for robotic foregut, bariatric, hepatobiliary/pancreatic, colorectal surgery, and single-incision cholecystectomy. Gastrointestinal surgery with the da Vinci(®) Surgical System is safe and comparable, but not superior to standard laparoscopic approaches. Although clinically acceptable, its use may be costly for select gastrointestinal procedures. Current data are limited to the da Vinci(®) Surgical System; further analyses are needed.

Influence of cyclical fatigue on torsional fracture morphology in endodontic instruments.

Science.gov (United States)

Lopreite, Gustavo; Basilaki, Jorge; Hecht, Pedro

2013-01-01

Cyclical fatigue may influence the appearance and propagation of the type of fracture of an endodontic instrument. The aim of this study was to assess the influence of cyclic fatigue on morphological features of torsional fracture in Pathfile nickel-titanium rotary instruments for surgical preparation in endodontics. Thirty new Pathfile instruments (Dentsply- Maillefer. Ballaigues-Switzerland) diameter .13 and taper .02 were randomly divided into 5 groups (n = 6). Twenty-four of them were subject to cyclical fatigue by continuous rotation using a stainless steel cylinder with internal bore 0.5 mm, length 25 mm, with a curve of 45 degrees and radius 8 mm at 5 mm from the tip, at 300 rpm and 1 Ncm torque for different times: A: 15 sec, B: 75 sec, C: 150 sec and D: 300 sec, while the fifth group was kept as a control (group N). As a second step, the instruments were rotated at 2 rpm and 1 Ncm torque, with their apical 3 mm fixed in a resin block until they suffered torsional fracture. The fracture surfaces were analyzed using a conventional high-vacuum scanning electron microscope (Phillips mod. 515) at 400x. All instruments had ductile fracture areas of different sizes. The ductile fracture areas were measured as percentages of the total area of the instrument by means of Golden Ratio (Softonic) software for measuring images. The data obtained were analyzed statistically using one-way variance analysis followed by Tukey's multiple comparison test. There were significant differences among groups regarding cyclic fatigue time and fragile fracture area (P fatigue to which the rotating PathFile instrument is subject significantly increases the percentage of ductile fracture area produced by torsion.

DISCO: An object-oriented system for music composition and sound design

Energy Technology Data Exchange (ETDEWEB)

Kaper, H. G.; Tipei, S.; Wright, J. M.

2000-09-05

This paper describes an object-oriented approach to music composition and sound design. The approach unifies the processes of music making and instrument building by using similar logic, objects, and procedures. The composition modules use an abstract representation of musical data, which can be easily mapped onto different synthesis languages or a traditionally notated score. An abstract base class is used to derive classes on different time scales. Objects can be related to act across time scales, as well as across an entire piece, and relationships between similar objects can replicate traditional music operations or introduce new ones. The DISCO (Digital Instrument for Sonification and Composition) system is an open-ended work in progress.

Instrumentation and operational plan for geokinetics retort No. 22

Energy Technology Data Exchange (ETDEWEB)

Parrish, R.L.; Hommert, P.J.

1980-04-01

This report outlines the general plan for the instrumentation and technical direction of a horizontal in siti retorting experiment to be conducted at the Geokinetics, Inc. field site in Uintah County, Utah. Bed preparation has been accomplished by Geokinetics by blasting the retort zone with explosives emplaced in wells drilled from the surface. Downhole instrumentation will consist of approx. 300 thermocouples and 28 combustion gas sampling ports to monitor the movement of the reaction front during the retorting process. Surface instrumentation will provide measurements of flow rates, gas composition, liquid products and other process parameters to monitor the overall operation of the process. The operational plan includes provision for data interpretation and real time material balance calculations in the field, including an evaluation of the effect on processing rates and oil yield due to the use of recycled combusted off gases and changes in rate of injection of inlet gases.

[Controversies about instrumented surgery and pain relief in degenerative lumbar spine pain. Results of scientific evidence].

Science.gov (United States)

Robaina-Padrón, F J

2007-10-01

Investigation and development of new techniques for intrumented surgery of the spine is not free of conflicts of interest. The influence of financial forces in the development of new technologies an its immediately application to spine surgery, shows the relationship between the published results and the industry support. Even authors who have defend eagerly fusion techniques, it have been demonstrated that them are very much involved in the revision of new articles to be published and in the approval process of new spinal technologies. When we analyze the published results of spine surgery, we must bear in mind what have been call in the "American Stock and Exchange" as "the bubble of spine surgery". The scientific literature doesn't show clear evidence in the cost-benefit studies of most instrumented surgical interventions of the spine compare with the conservative treatments. It has not been yet demonstrated that fusion surgery and disc replacement are better options than the conservative treatment. It's necessary to point out that at present "there are relationships between the industry and back pain, and there is also an industry of the back pain". Nonetheless, the "market of the spine surgery" is growing up because patients are demanding solutions for their back problems. The tide of scientific evidence seams to go against the spinal fusions in the degenerative disc disease, discogenic pain and inespecific back pain. After decades of advances in this field, the results of spinal fusions are mediocre. New epidemiological studies show that "spinal fusion must be accepted as a non proved or experimental method for the treatment of back pain". The surgical literature on spinal fusion published in the last 20 years following the Cochrane's method establish that: 1- this is at least incomplete, not reliable and careless; 2- the instrumentation seems to slightly increase the fusion rate; 3- the instrumentation doesn't improve the clinical results in general, lacking

Quality of life after stay in surgical intensive care unit.

Science.gov (United States)

Abelha, Fernando J; Santos, Cristina C; Maia, Paula C; Castro, Maria A; Barros, Henrique

2007-07-24

In addition to mortality, Health Related Quality of Life (HRQOL) has increasingly been claimed as an important outcome variable. The aim of this study was to assess HRQOL and independence in activities of daily living (ADL) six months after discharge from an Intensive Care Unit (ICU), and to study its determinants. All post-operative adult patients admitted to a surgical ICU between October 2004 and July 2005, were eligible for the study. The following variables were recorded on admission: age, gender, American Society of Anesthesiologists physical status (ASA-PS), type and magnitude of surgical procedure, ICU and hospital length of stay (LOS), mortality and Simplified Acute Physiology Score II (SAPS II). Six months after discharge, a Short Form-36 questionnaire (SF-36) and a questionnaire to assess dependency in ADL were sent to all survivors. Descriptive statistics was used to summarize data. Patient groups were compared using non-parametric tests. A logistic regression analysis was performed to identify covariate effects of each variable on dependency in personal and instrumental ADL, and for the change-in-health question of SF-36. Out of 333 hospital survivors, 226 completed the questionnaires. Fifty-nine percent reported that their general level of health was better on the day they answered the questionnaire than 12 months earlier. Patients with greater co-morbidities (ASA-PS III/IV), had lower SF-36 scores in all domains and were more frequently dependent in instrumental and personal ADL. Logistic regression showed that SAPS II was associated with changes in general level of health (OR 1.06, 95%CI, 1.01-1.11, p = 0,016). Six months after ICU discharge, 60% and 34% of patients, respectively, were dependent in at least one activity in instrumental ADL (ADLI) and personal ADL (ADLP). ASA-PS (OR 3.00, 95%CI 1.31-6.87, p = 0.009) and age (OR 2.36, 95%CI, 1.04-5.34, p = 0.04) were associated with dependency in ADLI. For ADLP, only ASA-PS (OR 4.58, 95%CI, 1

Recognizing surgical patterns

NARCIS (Netherlands)

Bouarfa, L.

2012-01-01

In the Netherlands, each year over 1700 patients die from preventable surgical errors. Numerous initiatives to improve surgical practice have had some impact, but problems persist. Despite the introduction of checklists and protocols, patient safety in surgery remains a continuing challenge. This is

Cassini radar: Instrument description and performance status

Science.gov (United States)

Johnson, W. T. K.; Im, E.; Borgarelli, L.; ZampoliniFaustini, E.

1995-01-01

The spacecraft of the Cassini mission is planned to be launched towards Saturn in October 1997. The mission is designed to study the physical structure and chemical composition of Titan. The results of the tests performed on the Cassini radar engineering qualification model (EQM) are summarized. The approach followed in the verification and evaluation of the performance of the radio frequency subsystem EQM is presented. The results show that the instrument satisfies the most relevant mission requirements.

Regression of an atlantoaxial rheumatoid pannus following posterior instrumented fusion.

Science.gov (United States)

Bydon, Mohamad; Macki, Mohamed; Qadi, Mohamud; De la Garza-Ramos, Rafael; Kosztowski, Thomas A; Sciubba, Daniel M; Wolinsky, Jean-Paul; Witham, Timothy F; Gokaslan, Ziya L; Bydon, Ali

2015-10-01

Rheumatoid patients may develop a retrodental lesion (atlantoaxial rheumatoid pannus) that may cause cervical instability and/or neurological compromise. The objective is to characterize clinical and radiographic outcomes after posterior instrumented fusion for atlantoaxial rheumatoid pannus. We retrospectively reviewed all patients who underwent posterior fusions for an atlantoaxial rheumatoid pannus at a single institution. Both preoperative and postoperative imaging was available for all patients. Anterior or circumferential operations, non-atlantoaxial panni, or prior C1-C2 operations were excluded. Primary outcome measures included Nurick score, Ranawat score (neurologic status in patients with rheumatoid arthritis), pannus regression, and reoperation. Pannus volume was determined with axial and sagittal views on both preoperative and postoperative radiological images. Thirty patients surgically managed for an atlantoaxial rheumatoid pannus were followed for a mean of 24.43 months. Nine patients underwent posterior instrumented fusion alone, while 21 patients underwent posterior decompression and instrumented fusion. Following a posterior instrumented fusion in all 30 patients, the pannus statistically significantly regressed by 44.44%, from a mean volume of 1.26cm(3) to 0.70cm(3) (ppannus radiographically regressed by 44.44% over a mean of 8.02 months, and patients clinically improved per the Nurick score. The Ranawat score did not improve, and 20% of patients required reoperation over a mean of 13.18 months. The annualized reoperation rate was approximately 13.62%. Copyright © 2015 Elsevier B.V. All rights reserved.

77 FR 65863 - Application(s) for Duty-Free Entry of Scientific Instruments

Science.gov (United States)

2012-10-31

... resolution and scanning mode will enable the investigation of the chemical structure, morphology and... study the crystal structure, defect characteristics, and elemental distribution/ segregation of single crystals, interfacial voids, polymers, and composites. The instrument will also be used for the...

Development of Polymethylmethacrylate Based Composite for Gas Sensing Application

OpenAIRE

Devikala, S.; Kamaraj, P.

2011-01-01

Gas detection instruments are increasingly needed for industrial health and safety, environmental monitoring and process control. Conductive polymer composites have various industrial applications. The composite prepared by mixing carbon black with polymethylmethacrylate (PMMA) has very good gas sensing applications. The gas sensors based on carbon nanotube/polymer, ceramic and metal oxide composites such as epoxy, polyimide, PMMA / Barium titanate and tin oxide have also been developed. In t...

[Comparative effectiveness of surgical and non-surgical treatment for pediatric mandibular condylar fractures].

Science.gov (United States)

Hu, Min; Wang, Yanyi; Zhang, Lihai; Yao, Jun

2010-12-01

To compare the effectiveness of open reduction and conservative treatment for pediatric mandibular condylar fractures and to provide the evidence for the selection of clinical therapy. The clinical data were retrospectively analyzed from 25 patients with the mandibular condylar fractures between January 1988 and December 2006. Of them, 8 patients (11 fractures) were treated with surgical treatment (surgical group) and 17 patients (22 fractures) with non-surgical treatment (non-surgical group). In surgical group, there were 6 males (9 fractures) and 2 females (2 fractures) with an age range of 8-13 years; fracture was caused by tumbling in 7 cases and by traffic accident in 1 with an interval of 1-6 days between injury and hospitalization; and 5 cases were identified as unilateral condylar fractures (3 complicated by mental fractures) and 3 cases as bilateral condylar fractures complicated by mental fractures. In non-surgical group, there were 12 males (15 fractures) and 5 females (7 fractures) with an age range of 3-12 years; fracture was caused by falling from height in 4 cases, by tumbling in 10, and by traffic accident in 3 with an interval of 1-25 days between injury and hospitalization; and 12 cases were identified as unilateral condylar fractures (3 complicated by mental fractures) and 5 cases as bilateral condylar fractures (1 complicated by mental fracture). Incision healed by first intention in surgical group, and 25 cases were followed up 1-6 years with an average of 3.5 years. At 12 months after treatment, no temporomandibular joint pain, eating disorder, or limited mandibular movement occurred in 2 groups. No significant difference was observed in opening mouth extent, protrusive and lateral movements between 2 groups at 6 and 12 months (P > 0.05). During centric occlusion, mental point located at the midline with symmetric face figure. Two patients in surgical group and 3 in non-surgical group had slight snap when opening their mouths. Mandible

Effect of autoclaving on the surfaces of TiN -coated and conventional nickel-titanium rotary instruments.

Science.gov (United States)

Spagnuolo, G; Ametrano, G; D'Antò, V; Rengo, C; Simeone, M; Riccitiello, F; Amato, M

2012-12-01

To evaluate the effects of repeated autoclave sterilization cycles on surface topography of conventional nickel-titanium ( NiTi ) and titanium nitride ( TiN )-coated rotary instruments. A total of 60 NiTi rotary instruments, 30 ProTaper (Dentsply Maillefer) and 30 TiN -coated AlphaKite (Komet/Gebr. Brasseler), were analysed. Instruments were evaluated in the as-received condition and after 1, 5 and 10 sterilization cycles. After sterilization, the samples were observed using scanning electron microscope (SEM), and surface chemical analysis was performed on each instrument with energy dispersive X-ray spectroscopy (EDS). Moreover, the samples were analysed by atomic force microscopy (AFM), and roughness average (Ra) and the root mean square value (RMS) of the scanned surface profiles were recorded. Data were analysed by means of anova followed by Tukey's test. Scanning electron microscope observations revealed the presence of pitting and deep milling marks in all instruments. EDS analysis confirmed that both types of instruments were composed mainly of nickel and titanium, whilst AlphaKite had additional nitride. After multiple autoclave sterilization cycles, SEM examinations revealed an increase in surface alterations, and EDS values indicated changes in chemical surface composition in all instruments. Ra and RMS values of ProTaper significantly increased after 5 (P = 0.006) and 10 cycles (P = 0.002) with respect to the as-received instruments, whilst AlphaKite showed significant differences compared with the controls after 10 cycles (P = 0.03). Multiple autoclave sterilization cycles modified the surface topography and chemical composition of conventional and TiN -coated NiTi rotary instruments. © 2012 International Endodontic Journal.

Wire in the Cable-Driven System of Surgical Robot

Science.gov (United States)

Wang, X. F.; Lv, N.; Mu, H. Z.; Xue, L. J.

2017-07-01

During the evolution of the surgical robot, cable plays an important role. It translates motion and force precisely from surgeon’s hand to the tool’s tips. In the paper, the vertical wires, the composition of cable, are mathematically modeled from a geometric point of view. The cable structure and tension are analyzed according to the characteristics of wire screw twist. The structural equations of the wires in different positions are derived for both non-bent cable and bent cable, respectively. The bending moment formula of bent cable is also obtained. This will help researchers find suitable cable and design more matched pulley.

Cultural adaptation and the Clavien-Dindo surgical complications classification translated to Brazilian Portuguese.

Directory of Open Access Journals (Sweden)

LUIS FERNANDO MOREIRA

Full Text Available ABSTRACT Objective: to generate a translated and validated version of the Clavien-Dindo Classification of Surgical Complications (CDC to Brazilian Portuguese (CDC-BR. Methods: the process of translation and adaptation followed the guideline of Beaton et al., 2000. We divided 76 participating surgeons, in different levels of experience, from the Department Surgery of the Hospital de Clínicas de Porto Alegre, into two groups: Group I applied the original version (CDC, n=36;r Group II used the modified version (CDC-BR, n=40. Each group classified 15 clinical cases of surgical complications. We compared performance between the groups (Mann-Whitney test relating to the level of experience of the surgeon (Kruskal-Wallis test, considering p value <0.05 as significant. Results: the performance of the Group II (CDC-BR was higher, with 85% accuracy, compared with 79% of Group I (CDC, p-value =0.012. The performance of the groups as for surgeons experience displayed p=0.171 for Group I, p=0.528 for Group II, and p=0.135 for overall performance. Conclusion: we produced a translated and validated version of the CDC for Brazilian Portuguese. The instrument will be a useful tool in the production of evidence on surgical outcomes.

Post coital penile ring entrapment: A report of a non-surgical extrication method

Directory of Open Access Journals (Sweden)

Agu Thaddeus Chika

2016-01-01

Full Text Available This case report shows how a simple but painstaking method of milking and levering in a slippery field was used to remove a thick metallic ring entrapped at the root of the penis after sexual intercourse. A ring can be removed easily from an organ if the inter-phase is made slippery. However this must be weighed against the handling difficulties posed by a wet slippery surface. With perseverance and the use of unconventional instrument, the ring was successfully extricated as a day case and without a surgical incision.

Comparison of Sexual Dysfunction Using the Female Sexual Function Index following Surgical Treatments for Uterine Fibroids

Directory of Open Access Journals (Sweden)

Allison Ryann Louie

2012-01-01

Full Text Available Uterine fibroids are a common problem in women. Statistics showing 20–50% of fibroids produce symptoms and consequently patients seek surgical intervention to improve their quality of life. Treatments for fibroids are typically successful in controlling the fibroid disease, yet sexual function following invasive surgical treatments for fibroids can be jeopardized. The Sexual Function Index (FSFI is a valid instrument producing quantifiable reproducible results. In this paper three case reports are evaluated by the FSFI and compared between the following treatment groups: hysterectomy, myomectomy, and uterine embolization. Our goal is to illustrate how each of these treatment outcomes can result in sexual dysfunction and therefore decreased quality of life. Effects of invasive fibroid treatments on sexual functioning would be helpful in guiding patient’s ultimate decisions regarding treatment.

Surgical versus non-surgical management for pleural empyema.

Science.gov (United States)

Redden, Mark D; Chin, Tze Yang; van Driel, Mieke L

2017-03-17

Empyema refers to pus in the pleural space, commonly due to adjacent pneumonia, chest wall injury, or a complication of thoracic surgery. A range of therapeutic options are available for its management, ranging from percutaneous aspiration and intercostal drainage to video-assisted thoracoscopic surgery (VATS) or thoracotomy drainage. Intrapleural fibrinolytics may also be administered following intercostal drain insertion to facilitate pleural drainage. There is currently a lack of consensus regarding optimal treatment. To assess the effectiveness and safety of surgical versus non-surgical treatments for complicated parapneumonic effusion or pleural empyema. We searched the Cochrane Central Register of Controlled Trials (CENTRAL) (2016, Issue 9), MEDLINE (Ebscohost) (1946 to July week 3 2013, July 2015 to October 2016) and MEDLINE (Ovid) (1 May 2013 to July week 1 2015), Embase (2010 to October 2016), CINAHL (1981 to October 2016) and LILACS (1982 to October 2016) on 20 October 2016. We searched ClinicalTrials.gov and WHO International Clinical Trials Registry Platform for ongoing studies (December 2016). Randomised controlled trials that compared a surgical with a non-surgical method of management for all age groups with pleural empyema. Two review authors independently assessed trials for inclusion and risk of bias, extracted data, and checked the data for accuracy. We contacted trial authors for additional information. We assessed the quality of the evidence using the GRADE approach. We included eight randomised controlled trials with a total of 391 participants. Six trials focused on children and two on adults. Trials compared tube thoracostomy drainage (non-surgical), with or without intrapleural fibrinolytics, to either VATS or thoracotomy (surgical) for the management of pleural empyema. Assessment of risk of bias for the included studies was generally unclear for selection and blinding but low for attrition and reporting bias. Data analyses compared

Microscope-integrated intraoperative optical coherence tomography-guided small-incision lenticule extraction: New surgical technique.

Science.gov (United States)

Sharma, Namrata; Urkude, Jayanand; Chaniyara, Manthan; Titiyal, Jeewan S

2017-10-01

We describe the surgical technique of microscope-integrated intraoperative optical coherence tomography (OCT)-guided small-incision lenticule extraction. The technique enables manual tracking of surgical instruments and identification of the desired dissection plane. It also helps discern the relation between the dissector and the intrastromal lenticule. The dissection plane becomes hyperreflective on dissection, ensuring complete separation of the intrastromal lenticule from the overlying and underlying stroma. Inadvertent posterior plane entry, cap-lenticule adhesion, incomplete separation of the lenticule, creation of a false plane, and lenticule remnants may be recognized intraoperatively so corrective steps can be taken immediately. In cases with a hazy overlying cap, microscope-integrated intraoperative OCT enables localization and extraction of the lenticule. The technique is helpful for inexperienced surgeons, especially in cases with low amplitudes of refractive errors, ie, thin lenticules. Copyright © 2017 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

Study on the transplant impact on the elementary composition of Protousnea magellanica thallus by using instrumental neutron activation analysis

International Nuclear Information System (INIS)

Bubach, Debora; Guevara, Sergio Ribeiro; Arribere, Maria A.; Wiesztort, Andres; Calvelo, Susana

1999-01-01

As part of a study on the use of the furticose lichen Protousnea magellanica as a bio indicator of atmospheric pollution, it was studied the impact on the elemental composition of the thallus when this lichen is transplanted in the same area under similar environmental conditions. The lichens were collected and replanted in a pristine area in Puerto Blest, Nahuel Huapi National Park, Bariloche, Argentina. After one year, the transplanted thalli were collected and analyzed by using Instrumental Activation Analysis, complemented with Atomic Absorption Spectrophotometry for the Pb content determination. Crustal inputs were identified by computing enrichment factors. The transplanted thalli concentrations of most of the elements under study, Al, As, Ba, Ce, Co, Cr, Dy, Eu, Hg, Fe, La, Lu, Mn, Na, Pb, Sb, Sc, Sm, Sr, Tb, Ti, Th, V, Yb and Zn, showed no significant differences with respect to the control thalli. However, some biological elements, Ca, Cl, Br, K and Rb, showed significant variations with respect to the controls, more noticeable in the first two elements. (author)

Surgical virtual reality - highlights in developing a high performance surgical haptic device.

Science.gov (United States)

Custură-Crăciun, D; Cochior, D; Constantinoiu, S; Neagu, C

2013-01-01

Just like simulators are a standard in aviation and aerospace sciences, we expect for surgical simulators to soon become a standard in medical applications. These will correctly instruct future doctors in surgical techniques without there being a need for hands on patient instruction. Using virtual reality by digitally transposing surgical procedures changes surgery in are volutionary manner by offering possibilities for implementing new, much more efficient, learning methods, by allowing the practice of new surgical techniques and by improving surgeon abilities and skills. Perfecting haptic devices has opened the door to a series of opportunities in the fields of research,industry, nuclear science and medicine. Concepts purely theoretical at first, such as telerobotics, telepresence or telerepresentation,have become a practical reality as calculus techniques, telecommunications and haptic devices evolved,virtual reality taking a new leap. In the field of surgery barrier sand controversies still remain, regarding implementation and generalization of surgical virtual simulators. These obstacles remain connected to the high costs of this yet fully sufficiently developed technology, especially in the domain of haptic devices. Celsius.

Evaluation of an antimicrobial surgical glove to inactivate live human immunodeficiency virus following simulated glove puncture.

Science.gov (United States)

Edmiston, Charles E; Zhou, S Steve; Hoerner, Pierre; Krikorian, Raffi; Krepel, Candace J; Lewis, Brian D; Brown, Kellie R; Rossi, Peter J; Graham, Mary Beth; Seabrook, Gary R

2013-02-01

Percutaneous injuries associated with cutting instruments, needles, and other sharps (eg, metallic meshes, bone fragments, etc) occur commonly during surgical procedures, exposing members of surgical teams to the risk for contamination by blood-borne pathogens. This study evaluated the efficacy of an innovative integrated antimicrobial glove to reduce transmission of the human immunodeficiency virus (HIV) following a simulated surgical-glove puncture injury. A pneumatically activated puncturing apparatus was used in a surgical-glove perforation model to evaluate the passage of live HIV-1 virus transferred via a contaminated blood-laden needle, using a reference (standard double-layer glove) and an antimicrobial benzalkonium chloride (BKC) surgical glove. The study used 2 experimental designs. In method A, 10 replicates were used in 2 cycles to compare the mean viral load following passage through standard and antimicrobial gloves. In method B, 10 replicates were pooled into 3 aliquots and were used to assess viral passage though standard and antimicrobial test gloves. In both methods, viral viability was assessed by observing the cytopathic effects in human lymphocytic C8166 T-cell tissue culture. Concurrent viral and cell culture viability controls were run in parallel with the experiment's studies. All controls involving tissue culture and viral viability were performed according to study design. Mean HIV viral loads (log(10)TCID(50)) were significantly reduced (P reduction (log reduction and percent viral reduction) of the HIV virus ranged from 1.96 to 2.4 and from 98.9% to 99.6%, respectively, following simulated surgical-glove perforation. Sharps injuries in the operating room pose a significant occupational risk for surgical practitioners. The findings of this study suggest that an innovative antimicrobial glove was effective at significantly (P < .01) reducing the risk for blood-borne virus transfer in a model of simulated glove perforation. Copyright �

Acquiring minimally invasive surgical skills

OpenAIRE

Hiemstra, Ellen

2012-01-01

Many topics in surgical skills education have been implemented without a solid scientific basis. For that reason we have tried to find this scientific basis. We have focused on training and evaluation of minimally invasive surgical skills in a training setting and in practice in the operating room. This thesis has led to an enlarged insight in the organization of surgical skills training during residency training of surgical medical specialists.

Radiographic and Functional Outcome in Adolescent Idiopathic Scoliosis Operated With Hook/Hybrid Versus All-Pedicle Screw Instrumentation-A Retrospective Study in 149 Patients

DEFF Research Database (Denmark)

Ohrt-Nissen, Søren; Hallager, Dennis W; Karbo, Ture

2017-01-01

largely replaced H/H in the surgical treatment of AIS but whether a normalized sagittal profile can be obtained with the PS construct is still debated. Additionally, comparative studies assessing HRQL and surgical complications are needed. METHODS: Two consecutive series of surgically treated AIS patients...... were included. Surgical treatment consisted of H/H or low-profile all-PS instrumentation. Radiographic and clinical follow-up, including SRS-22r questionnaires, was performed a minimum of two years postoperatively. RESULTS: There were 85 and 64 patients in the H/H and PS group, respectively. The groups...... 4° (p kyphosis was significantly higher in the H/H group (27° ± 11° vs. 22° ± 11° in the PS group) with a mean change in kyphosis of 3° ± 9° versus -3° ± 12...

Alcohol skin preparation causes surgical fires.

Science.gov (United States)

Rocos, B; Donaldson, L J

2012-03-01

Surgical fires are a rare but serious preventable safety risk in modern hospitals. Data from the US show that up to 650 surgical fires occur each year, with up to 5% causing death or serious harm. This study used the National Reporting and Learning Service (NRLS) database at the National Patient Safety Agency to explore whether spirit-based surgical skin preparation fluid contributes to the cause of surgical fires. The NRLS database was interrogated for all incidents of surgical fires reported between 1 March 2004 and 1 March 2011. Each report was scrutinised manually to discover the cause of the fire. Thirteen surgical fires were reported during the study period. Of these, 11 were found to be directly related to spirit-based surgical skin preparation or preparation soaked swabs and drapes. Despite manufacturer's instructions and warnings, surgical fires continue to occur. Guidance published in the UK and US states that spirit-based skin preparation solutions should continue to be used but sets out some precautions. It may be that fire risk should be included in pre-surgical World Health Organization checklists or in the surgical training curriculum. Surgical staff should be aware of the risk that spirit-based skin preparation fluids pose and should take action to minimise the chance of fire occurring.

Effects of Frequent Glove Change on Outcomes of Orthopaedic Surgical Procedures - A Multicenter Study on Surgical Gloves

Directory of Open Access Journals (Sweden)

Nishit Palo

2017-10-01

Full Text Available Introduction: Intact surgical gloves are a barrier to microorganisms migration between surgical team members and the patient. The surgical gloves are changed at various junctures but the effects of changing gloves during surgical procedures on various surgical parameters or clinical outcomes are not established. Aim: To determine rationale of glove change during orthopaedic procedures, differences amongst surgical parameters with and without changing the surgical gloves and whether frequent glove change affected surgical parameters or clinical outcomes. Materials and Methods: A prospective multicenter study conducted at three centers from January 2014 to January 2016. A 250 patients were divided into 2 groups (n=125 each in Group 1, surgical team operated with regular changing of gloves. In Group 2, only 1 set of double gloves were worn throughout the procedure. Surgical parameters or clinical outcomes were assessed for both the groups. Statistical analyses included the median, mode, range, Interquartile Range (IQR and sample standard deviation (s and independent-samples t-test. Bacterial counts were expressed as median with (IQR. Results: Surgical Timing Difference was 10 (S.D.- 4.2 minutes more in Group-1 (<0.05, Surgical Cost was higher in Group-1 by Rs.150-450 (<0.05. Outer glove micro-perforation rate was 5.85% and 8.15% in group-1 and 2 respectively with no inner glove perforation or Surgical Site Infections. Outer glove micro perforations were proportional to duration of surgery; operations lasting 120-210 and 61-120 minutes had 66.6% and 37.2% micro perforation rates respectively (p<0.05. Conclusion: Under standard operating conditions, procedures performed without glove change are shorter and cost effective than procedures performed with regular glove change with similar surgical and functional results. Judicious use of surgical gloves is a patient and environment friendly option, thereby reducing the hospital’s biomedical waste load.

Surgical medical record

DEFF Research Database (Denmark)

Bulow, S.

2008-01-01

A medical record is presented on the basis of selected linguistic pearls collected over the years from surgical case records Udgivelsesdato: 2008/12/15......A medical record is presented on the basis of selected linguistic pearls collected over the years from surgical case records Udgivelsesdato: 2008/12/15...

Assessing Technical Competence in Surgical Trainees: A Systematic Review.

Science.gov (United States)

Szasz, Peter; Louridas, Marisa; Harris, Kenneth A; Aggarwal, Rajesh; Grantcharov, Teodor P

2015-06-01

To systematically examine the literature describing the methods by which technical competence is assessed in surgical trainees. The last decade has witnessed an evolution away from time-based surgical education. In response, governing bodies worldwide have implemented competency-based education paradigms. The definition of competence, however, remains elusive, and the impact of these education initiatives in terms of assessment methods remains unclear. A systematic review examining the methods by which technical competence is assessed was conducted by searching MEDLINE, EMBASE, PsychINFO, and the Cochrane database of systematic reviews. Abstracts of retrieved studies were reviewed and those meeting inclusion criteria were selected for full review. Data were retrieved in a systematic manner, the validity and reliability of the assessment methods was evaluated, and quality was assessed using the Grading of Recommendations Assessment, Development and Evaluation classification. Of the 6814 studies identified, 85 studies involving 2369 surgical residents were included in this review. The methods used to assess technical competence were categorized into 5 groups; Likert scales (37), benchmarks (31), binary outcomes (11), novel tools (4), and surrogate outcomes (2). Their validity and reliability were mostly previously established. The overall Grading of Recommendations Assessment, Development and Evaluation for randomized controlled trials was high and low for the observational studies. The definition of technical competence continues to be debated within the medical literature. The methods used to evaluate technical competence predominantly include instruments that were originally created to assess technical skill. Very few studies identify standard setting approaches that differentiate competent versus noncompetent performers; subsequently, this has been identified as an area with great research potential.

Metallurgical characterization of controlled memory wire nickel-titanium rotary instruments.

Science.gov (United States)

Shen, Ya; Zhou, Hui-Min; Zheng, Yu-Feng; Campbell, Les; Peng, Bin; Haapasalo, Markus

2011-11-01

To improve the fracture resistance of nickel-titanium (NiTi) files, manufacturers have introduced new alloys and developed new manufacturing processes for the fabrication of NiTi files. This study aimed to examine the phase transformation behavior and microstructure of NiTi instruments from a novel controlled memory NiTi wire (CM wire). Instruments of EndoSequence (ES), ProFile (PF), ProFile Vortex (Vortex), Twisted Files (TF), Typhoon (TYP), and Typhoon™ CM (TYP CM), all size 25/.04, were examined by differential scanning calorimetry (DSC) and x-ray diffraction (XRD). Microstructures of etched instruments were observed by optical microscopy and scanning electron microscopy with x-ray energy-dispersive spectrometric (EDS) analyses. The DSC analyses showed that each segment of the TYP CM and Vortex instruments had an austenite transformation completion or austenite-finish (A(f)) temperature exceeding 37°C, whereas the NiTi instruments made from conventional superelastic NiTi wire (ES, PF, and TYP) and TF had A(f) temperatures substantially below mouth temperature. The higher A(f) temperature of TYP CM instruments was consistent with a mixture of austenite and martensite structure, which was observed at room temperature with XRD. All NiTi instruments had room temperature martensite microstructures consisting of colonies of lenticular features with substantial twinning. EDS analysis indicated that the precipitates in all NiTi instruments were titanium-rich, with an approximate composition of Ti(2)Ni. The TYP CM and Vortex instruments with heat treatment contribute to increase austenite transformation temperature. The CM instrument has significant changes in the phase transformation behavior, compared with conventional superelastic NiTi instruments. Copyright © 2011 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Instrumentation

International Nuclear Information System (INIS)

Prieur, G.; Nadi, M.; Hedjiedj, A.; Weber, S.

1995-01-01

This second chapter on instrumentation gives little general consideration on history and classification of instrumentation, and two specific states of the art. The first one concerns NMR (block diagram of instrumentation chain with details on the magnets, gradients, probes, reception unit). The first one concerns precision instrumentation (optical fiber gyro-meter and scanning electron microscope), and its data processing tools (programmability, VXI standard and its history). The chapter ends with future trends on smart sensors and Field Emission Displays. (D.L.). Refs., figs

The results of decompressive surgery and instrumented posterolateral fusion in refractory degenerative spondylolisthesis

Directory of Open Access Journals (Sweden)

Behtash H

2009-02-01

Full Text Available "nBackground: Degenerative spondylolisthesis is a common disease of the lumbar spine especially in older ones. The disease represents a challenge to the treating physician. At present, for those patients that deteriorate clinically, there are many proposed algorithms for the surgical treatment. This before and after study was undertaken to assess the surgical results of decompression and instrumented posterolateral fusion in these patients. "nMethods: The study population consisted of 23 patients who had undergone no prior surgery for degenerative spondylolisthesis on the lumbar spine. These patients were treated by decompression, bilateral posterolateral fusion, and segmental (pedicle screw instrumentation with mean follow-up of 29 months (range, 13-73 months. Finally, The clinical results were evaluated for all patients by means of an Oswestry Disability Index (ODI version 2.1, the Henderson's functional capacity, and persistence of leg symptoms, low back pain or claudication. Mann-Whitney and Chi-Square tests were used to assess the average values and comparison, respectively. "nResults: Henderson's functional capacity at the last visit session was excellent in 14 (60.9%, good in 7 (30.4%, fair in 2 (8.7% cases. ODI decreased from 72.2% (50-88% preoperatively to 14.4% (0-54% at the latest follow-up visit. A history of leg pain or claudication was correlated significantly with the amount of decline in ODI score and Henderson's functional capacity (p<0.05. "nConclusion: In spite of limited number of our patients, decompressive surgery plus instrumented posterolateral fusion is a safe, reliable, and satisfactory procedure for treating degenerative lumbar spondylolisthesis. This procedure may be done when conservative treatment was failed and psychological problems can be ruled out.

Real-time in situ three-dimensional integral videography and surgical navigation using augmented reality: a pilot study

Science.gov (United States)

Suenaga, Hideyuki; Hoang Tran, Huy; Liao, Hongen; Masamune, Ken; Dohi, Takeyoshi; Hoshi, Kazuto; Mori, Yoshiyuki; Takato, Tsuyoshi

2013-01-01

To evaluate the feasibility and accuracy of a three-dimensional augmented reality system incorporating integral videography for imaging oral and maxillofacial regions, based on preoperative computed tomography data. Three-dimensional surface models of the jawbones, based on the computed tomography data, were used to create the integral videography images of a subject's maxillofacial area. The three-dimensional augmented reality system (integral videography display, computed tomography, a position tracker and a computer) was used to generate a three-dimensional overlay that was projected on the surgical site via a half-silvered mirror. Thereafter, a feasibility study was performed on a volunteer. The accuracy of this system was verified on a solid model while simulating bone resection. Positional registration was attained by identifying and tracking the patient/surgical instrument's position. Thus, integral videography images of jawbones, teeth and the surgical tool were superimposed in the correct position. Stereoscopic images viewed from various angles were accurately displayed. Change in the viewing angle did not negatively affect the surgeon's ability to simultaneously observe the three-dimensional images and the patient, without special glasses. The difference in three-dimensional position of each measuring point on the solid model and augmented reality navigation was almost negligible (augmented reality system was highly accurate and effective for surgical navigation and for overlaying a three-dimensional computed tomography image on a patient's surgical area, enabling the surgeon to understand the positional relationship between the preoperative image and the actual surgical site, with the naked eye. PMID:23703710

Composite thermocouples

International Nuclear Information System (INIS)

Debeir, R.P.

1975-01-01

As a rule, a composite thermocouple is a thermocouple where one or more components (wires, sheath, insulation) differ in kind between the hot junction measurement point and the cold termination with ordinary cables going on to measurement instrumentation. Three categories of such thermocouples are discussed: composite thermocouples having in common the continuity of the thermoelement wires over complete length, and different sheaths and insulation for the high temperature and intermediate temperature parts; those with different thermoelement wires, sheaths, and insulators for the high and intermediate temperature parts; a third category includes the high temperature thermoelements insulated by Al 2 O 3 or BeO and sheathed with a refractory metal, and with the intermediate temperature part made of 2Cr-Al couples, MgO insulated, and stainless steel or inconel sheathed

Quality of surgical scrub in a heart hospital: Do not take it for granted

Directory of Open Access Journals (Sweden)

Leila Abdollahi

2017-09-01

Full Text Available Introduction: The role of scrub in the prevention of post-surgery infections is well-known. This study aimed to investigate the inputs and process of surgical scrub in operating rooms of the largest heart hospital of northwest Iran. Methods: This study took place with a before-after design as a clinical audit in 2014. A check list developed based on national and international standards of surgical hand scrub was used as the study instrument. Checklists were completed by observation of surgical team scrubbing in real situation. Descriptive statistics and graphs were used to describe the results. Results: A compliance degree with the standards for prerequisites, equipment, general items, process and time of scrub was observed as 58%, 55%, 33%, 68% and 22%, respectively. The compliance degree after the intervention was 72%, 66%, 66%, 85% and 61%, respectively. Improvement was observed in all studied aspects of scrub. The total score of compliance with the standards changed from 47% to 70%. The main issues were incorrect order of scrubbing the areas of the hands, incorrect way of scrubbing the arms, insufficient scrubbing the arms (not above elbow, and lack of awareness about hospital’s policy on scrub time. Conclusion: The results showed defects in the surgical scrub of the studied hospital and that the compliance with the standards can be improved by simple interventions. Periodical audit and observation of the scrub and then feedback is recommended.

Computer-based laparoscopic and robotic surgical simulators: performance characteristics and perceptions of new users.

Science.gov (United States)

Lin, David W; Romanelli, John R; Kuhn, Jay N; Thompson, Renee E; Bush, Ron W; Seymour, Neal E

2009-01-01

This study aimed to define perceptions of the need and the value of new simulation devices for laparoscopic and robot-assisted surgery. The initial experience of surgeons using both robotic and nonrobotic laparoscopic simulators to perform an advanced laparoscopic skill was evaluated. At the 2006 Society of American Gastroesophageal Surgeons (SAGES) meeting, 63 Learning Center attendees used a new virtual reality robotic surgery simulator (SEP Robot) and either a computer-enhanced laparoscopic simulator (ProMIS) or a virtual reality simulator (SurgicalSIM). Demographic and training data were collected by an intake survey. Subjects then were assessed during one iteration of laparoscopic suturing and knot-tying on the SEP Robot and either the ProMIS or the SurgicalSIM. A posttask survey determined users' impressions of task realism, interface quality, and educational value. Performance data were collected and comparisons made between user-defined groups, different simulation platforms, and posttask survey responses. The task completion rate was significantly greater for experts than for nonexperts on the virtual reality platforms (SurgicalSIM: 100% vs 36%; SEP Robot: 93% vs 63%; p platforms, whereas simulator metrics best discriminated expertise for the videoscopic platform. Similar comparisons for the virtual reality platforms were not feasible because of the low task completion rate for nonexperts. The added degrees of freedom associated with the robotic surgical simulator instruments facilitated completion of the task by nonexperts. All platforms were perceived as effective training tools.

Quality of surgical scrub in a heart hospital: Do not take it for granted.

Science.gov (United States)

Abdollahi, Leila; Tabrizi, Jafar Sadegh; Jodati, Ahmadreza; Safaie, Naser; Moradi-Joo, Mohammad; Daemi, Amin

2017-01-01

Introduction: The role of scrub in the prevention of post-surgery infections is well-known. This study aimed to investigate the inputs and process of surgical scrub in operating rooms of the largest heart hospital of northwest Iran. Methods: This study took place with a before-after design as a clinical audit in 2014. A check list developed based on national and international standards of surgical hand scrub was used as the study instrument. Checklists were completed by observation of surgical team scrubbing in real situation. Descriptive statistics and graphs were used to describe the results. Results: A compliance degree with the standards for prerequisites, equipment, general items, process and time of scrub was observed as 58%, 55%, 33%, 68% and 22%, respectively. The compliance degree after the intervention was 72%, 66%, 66%, 85% and 61%, respectively. Improvement was observed in all studied aspects of scrub. The total score of compliance with the standards changed from 47% to 70%. The main issues were incorrect order of scrubbing the areas of the hands, incorrect way of scrubbing the arms, insufficient scrubbing the arms (not above elbow), and lack of awareness about hospital's policy on scrub time. Conclusion: The results showed defects in the surgical scrub of the studied hospital and that the compliance with the standards can be improved by simple interventions. Periodical audit and observation of the scrub and then feedback is recommended.

Instrumentation

Energy Technology Data Exchange (ETDEWEB)

Decreton, M

2001-04-01

SCK-CEN's research and development programme on instrumentation involves the assessment and the development of sensitive measurement systems used within a radiation environment. Particular emphasis is on the assessment of optical fibre components and their adaptability to radiation environments. The evaluation of ageing processes of instrumentation in fission plants, the development of specific data evaluation strategies to compensate for ageing induced degradation of sensors and cable performance form part of these activities. In 2000, particular emphasis was on in-core reactor instrumentation applied to fusion, accelerator driven and water-cooled fission reactors. This involved the development of high performance instrumentation for irradiation experiments in the BR2 reactor in support of new instrumentation needs for MYRRHA, and for diagnostic systems for the ITER reactor.

Instrumentation

International Nuclear Information System (INIS)

Decreton, M.

2001-01-01

SCK-CEN's research and development programme on instrumentation involves the assessment and the development of sensitive measurement systems used within a radiation environment. Particular emphasis is on the assessment of optical fibre components and their adaptability to radiation environments. The evaluation of ageing processes of instrumentation in fission plants, the development of specific data evaluation strategies to compensate for ageing induced degradation of sensors and cable performance form part of these activities. In 2000, particular emphasis was on in-core reactor instrumentation applied to fusion, accelerator driven and water-cooled fission reactors. This involved the development of high performance instrumentation for irradiation experiments in the BR2 reactor in support of new instrumentation needs for MYRRHA, and for diagnostic systems for the ITER reactor

Recalibration of the Mars Science Laboratory ChemCam instrument with an expanded geochemical database

Science.gov (United States)

Clegg, Samuel M.; Wiens, Roger C.; Anderson, Ryan; Forni, Olivier; Frydenvang, Jens; Lasue, Jeremie; Cousin, Agnes; Payre, Valerie; Boucher, Tommy; Dyar, M. Darby; McLennan, Scott M.; Morris, Richard V.; Graff, Trevor G.; Mertzman, Stanley A; Ehlmann, Bethany L.; Belgacem, Ines; Newsom, Horton E.; Clark, Ben C.; Melikechi, Noureddine; Mezzacappa, Alissa; McInroy, Rhonda E.; Martinez, Ronald; Gasda, Patrick J.; Gasnault, Olivier; Maurice, Sylvestre

2017-01-01

The ChemCam Laser-Induced Breakdown Spectroscopy (LIBS) instrument onboard the Mars Science Laboratory (MSL) rover Curiosity has obtained > 300,000 spectra of rock and soil analysis targets since landing at Gale Crater in 2012, and the spectra represent perhaps the largest publicly-available LIBS datasets. The compositions of the major elements, reported as oxides (SiO2, TiO2, Al2O3, FeOT, MgO, CaO, Na2O, K2O), have been re-calibrated using a laboratory LIBS instrument, Mars-like atmospheric conditions, and a much larger set of standards (408) that span a wider compositional range than previously employed. The new calibration uses a combination of partial least squares (PLS1) and Independent Component Analysis (ICA) algorithms, together with a calibration transfer matrix to minimize differences between the conditions under which the standards were analyzed in the laboratory and the conditions on Mars. While the previous model provided good results in the compositional range near the average Mars surface composition, the new model fits the extreme compositions far better. Examples are given for plagioclase feldspars, where silicon was significantly over-estimated by the previous model, and for calcium-sulfate veins, where silicon compositions near zero were inaccurate. The uncertainties of major element abundances are described as a function of the abundances, and are overall significantly lower than the previous model, enabling important new geochemical interpretations of the data.

Epidural anaesthesia and analgesia - effects on surgical stress responses and implications for postoperative nutrition

DEFF Research Database (Denmark)

Holte, Kathrine; Kehlet, H

2002-01-01

for improved mobilization and oral nutrition, and preservation of body composition and muscle function. Studies integrating continuous epidural local anaesthetics with enforced early nutrition and mobilization uniformly suggest an improved recovery, decreased hospital stay and convalescence. CONCLUSIONS......: Epidural local anaesthetics should be included in a multi-modal rehabilitation programme after major surgical procedures in order to facilitate oral nutrition, improve recovery and reduce morbidity....

40 CFR 65.104 - Instrument and sensory monitoring for leaks.

Science.gov (United States)

2010-07-01

... the representative composition of the process fluid not each individual organic compound in the stream...)(ii) of this section. (i) Mixtures of methane in air at a concentration no more than 2,000 parts per... calibration gas other than methane in air may be used if the instrument does not respond to methane or if the...

Fiber optical sensor system for shape and haptics for flexible instruments in minimally invasive surgery: overview and status quo

Science.gov (United States)

Ledermann, Christoph; Pauer, Hendrikje; Woern, Heinz

2014-05-01

In minimally invasive surgery, exible mechatronic instruments promise to improve the overall performance of surgical interventions. However, those instruments require highly developed sensors in order to provide haptic feedback to the surgeon or to enable (semi-)autonomous tasks. Precisely, haptic sensors and a shape sensor are required. In this paper, we present our ber optical sensor system of Fiber Bragg Gratings, which consists of a shape sensor, a kinesthetic sensor and a tactile sensor. The status quo of each of the three sensors is described, as well as the concept to integrate them into one ber optical sensor system.

Comparison of different types of phacoemulsification tips. I. Quantitative analysis of elemental composition and tip surface microroughness.

Science.gov (United States)

Tsaousis, Konstantinos T; Werner, Liliana; Perez, Jesus Paulo; Li, He J; Reiter, Nicholas; Guan, Jia J; Mamalis, Nick

2016-09-01

To evaluate the elemental composition of phacoemulsification tips and their surface roughness in the microscale. John A. Moran Eye Center and Utah Nanofab, College of Engineering, University of Utah, Salt Lake City, Utah, USA. Experimental study. Seven types of phacoemulsification tips were studied. The phaco tips were examined through energy-dispersive x-ray spectroscopy (EDS) and x-ray photoelectron spectroscopy (XPS) for elemental composition. In addition, the roughness of the opening in all tips was assessed through 3-dimensional white-light interferometry. Elemental analysis showed considerable differences in the surface layers between manufacturers. Alcon tips had a thinner oxidized titanium (Ti) layer in their surface. Through XPS, vanadium was not detected in the superficial layers of any tip, but only in deeper levels. The microroughness surface analysis showed comparable results regarding their root-mean-square (RMS) metric. Maximum peak valley distance values varied and appeared to be dependent on the quality of material process rather than the material itself. Phacoemulsification tips are made of Ti alloys and showed differences between models, especially regarding their composition in the superficial layers. Their opening end roughness showed an overall appropriate RMS value of less than 1.0 μm in all cases. The existence of small defected areas highlights the importance of adequate quality control of these critical surgical instruments. None of the authors has a financial or proprietary interest in any material or method mentioned. Copyright © 2016 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

A cable-driven soft robot surgical system for cardiothoracic endoscopic surgery: preclinical tests in animals.

Science.gov (United States)

Wang, Hesheng; Zhang, Runxi; Chen, Weidong; Wang, Xiaozhou; Pfeifer, Rolf

2017-08-01

Minimally invasive surgery attracts more and more attention because of the advantages of minimal trauma, less bleeding and pain and low complication rate. However, minimally invasive surgery for beating hearts is still a challenge. Our goal is to develop a soft robot surgical system for single-port minimally invasive surgery on a beating heart. The soft robot described in this paper is inspired by the octopus arm. Although the octopus arm is soft and has more degrees of freedom (DOFs), it can be controlled flexibly. The soft robot is driven by cables that are embedded into the soft robot manipulator and can control the direction of the end and middle of the soft robot manipulator. The forward, backward and rotation movement of the soft robot is driven by a propulsion plant. The soft robot can move freely by properly controlling the cables and the propulsion plant. The soft surgical robot system can perform different thoracic operations by changing surgical instruments. To evaluate the flexibility, controllability and reachability of the designed soft robot surgical system, some testing experiments have been conducted in vivo on a swine. Through the subxiphoid, the soft robot manipulator could enter into the thoracic cavity and pericardial cavity smoothly and perform some operations such as biopsy, ligation and ablation. The operations were performed successfully and did not cause any damage to the surrounding soft tissues. From the experiments, the flexibility, controllability and reachability of the soft robot surgical system have been verified. Also, it has been shown that this system can be used in the thoracic and pericardial cavity for different operations. Compared with other endoscopy robots, the soft robot surgical system is safer, has more DOFs and is more flexible for control. When performing operations in a beating heart, this system maybe more suitable than traditional endoscopy robots.

Thermal degradation and tensile strength of sansevieria trifasciata-polypropylene composites

Science.gov (United States)

Abral, H.; Kenedy, E.

2015-07-01

The paper exhibits thermal degradation and tensile strength of Sansevieria Trifasciata (ST) fibers and polypropylene (PP) composites. Thermal degradation of ST fibers PP composites was conducted by using thermogravimetry (TGA) instrument, meanwhile tensile strength of the composite was done by using tensile equipment. The results show that the thermal resistance of ST fibers PP composites was higher than that of virgin PP only. Increases in volume fraction of fibers in the composites enhance the tensile strength. Scanning Electron Microscope (SEM) observation exhibits good interface bonding between ST fibers and PP matrix.

Thermal degradation and tensile strength of sansevieria trifasciata-polypropylene composites

International Nuclear Information System (INIS)

Abral, H; Kenedy, E

2015-01-01

The paper exhibits thermal degradation and tensile strength of Sansevieria Trifasciata (ST) fibers and polypropylene (PP) composites. Thermal degradation of ST fibers PP composites was conducted by using thermogravimetry (TGA) instrument, meanwhile tensile strength of the composite was done by using tensile equipment. The results show that the thermal resistance of ST fibers PP composites was higher than that of virgin PP only. Increases in volume fraction of fibers in the composites enhance the tensile strength. Scanning Electron Microscope (SEM) observation exhibits good interface bonding between ST fibers and PP matrix. (paper)

Minimally invasive surgical treatment options for patients with degenerative lumbar spine disease

International Nuclear Information System (INIS)

Durny, P.

2014-01-01

The most common cause of reduced activity in working people is degenerative disc disease and spondylosis of lumbar spine. The variety of clinical findings such as segmental lumbago or severe form of mixed radicular compression syndromes can be occurred. Neurosurgical intervention is indicated in case of failure of conservative treatment and graphical findings correlating with a clinical picture. Large decompressive surgical procedures can destabilize segments previously affected. Recommendations from recent years suggested the functional reconstruction of damaged parts of the vertebrae, intervertebral discs and joints. Continuously improving surgical procedures and instrumentations, intended for operative treatment of lumbar spine degenerative diseases is primarily an effort to improve the properties of implants while minimizing tissue damage during the approach to the target structure. To protect functions of active spine stabilizer and paraspinal muscles is an important factor for the final outcome of the operation. Depend on the nature and extent of the disease the approaches to the spine can be an anterior, lateral and posterior as open surgery or minimally invasive procedures. (author)

Hybrid procedure for total laryngectomy with a flexible robot-assisted surgical system.

Science.gov (United States)

Schuler, Patrick J; Hoffmann, Thomas K; Veit, Johannes A; Rotter, Nicole; Friedrich, Daniel T; Greve, Jens; Scheithauer, Marc O

2017-06-01

Total laryngectomy is a standard procedure in head-and-neck surgery for the treatment of cancer patients. Recent clinical experiences have indicated a clinical benefit for patients undergoing transoral robot-assisted total laryngectomy (TORS-TL) with commercially available systems. Here, a new hybrid procedure for total laryngectomy is presented. TORS-TL was performed in human cadavers (n = 3) using a transoral-transcervical hybrid procedure. The transoral approach was performed with a robotic flexible robot-assisted surgical system (Flex®) and compatible flexible instruments. Transoral access and visualization of anatomical landmarks were studied in detail. Total laryngectomy is feasible with a combined transoral-transcervical approach using the flexible robot-assisted surgical system. Transoral visualization of all anatomical structures is sufficient. The flexible design of the robot is advantageous for transoral surgery of the laryngeal structures. Transoral robot assisted surgery has the potential to reduce morbidity, hospital time and fistula rates in a selected group of patients. Initial clinical studies and further development of supplemental tools are in progress. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Pediatric abdominal non-Hodgkin's lymphoma: diagnosis through surgical and non-surgical procedures.

Science.gov (United States)

Aguiar, Arthur Almeida; Lima, Luciana Cavalvanti; Araújo, Cláudia Corrêa de; Gallindo, Rodrigo Melo

2017-12-29

To describe the success rate and the complications after procedures to diagnose abdominal non-Hodgkin's lymphoma in children and adolescents. A retrospective cross-sectional study was conducted with a population consisting of children and adolescents with abdominal non-Hodgkin's lymphoma diagnosed between September 1994 and December 2012. The sample comprised of 100 patients who underwent 113 diagnostic procedures, including urgent surgery (n=21), elective surgery (n=36), and non-surgical diagnosis (n=56). The most frequent procedures were laparotomy (46.9%) and ultrasound-guided core biopsy (25.6%). The rate of diagnostic success was 95.2% for urgent surgeries; 100% for elective surgeries and 82.1% for non-surgical procedures (p<0.05). The rates of complication during the three diagnosis procedures considered were significant (p<0.001; 95.2% of the urgent surgeries, 83.8% of the elective surgeries, and 10.7% of the non-surgical procedures). The length of time before resuming a full diet and starting chemotherapy was significantly reduced for patients who underwent non-surgical procedures when compared with the other procedures (p<0.001). Non-surgical procedures for the diagnosis of pediatric abdominal non-Hodgkin's lymphoma are an effective option with low morbidity rate, allowing an earlier resumption of a full diet and chemotherapy initiation. Furthermore, non-surgical procedures should also be considered for obtaining tumor samples from patients with extensive disease. Copyright © 2017. Published by Elsevier Editora Ltda.

Patient-Specific Instruments Based on Knee Joint Computed Tomography and Full-Length Lower Extremity Radiography in Total Knee Replacement

Directory of Open Access Journals (Sweden)

Hua Tian

2018-01-01

Conclusions: The use of PSIs based on knee joint CT and standing full-length lower extremity radiography in TKR resulted in acceptable alignment compared with the use of conventional instruments, although the marginal advantage was not statistically different. Surgical time and clinical results were also similar between the two groups. However, the PSI group had less postoperative drainage.

Analysis of verbal communication during teaching in the operating room and the potentials for surgical training.

Science.gov (United States)

Blom, E M; Verdaasdonk, E G G; Stassen, L P S; Stassen, H G; Wieringa, P A; Dankelman, J

2007-09-01

Verbal communication in the operating room during surgical procedures affects team performance, reflects individual skills, and is related to the complexity of the operation process. During the procedural training of surgeons (residents), feedback and guidance is given through verbal communication. A classification method based on structural analysis of the contents was developed to analyze verbal communication. This study aimed to evaluate whether a classification method for the contents of verbal communication in the operating room could provide insight into the teaching processes. Eight laparoscopic cholecystectomies were videotaped. Two entire cholecystectomies and the dissection phase of six additional procedures were analyzed by categorization of the communication in terms of type (4 categories: commanding, explaining, questioning, and miscellaneous) and content (9 categories: operation method, location, direction, instrument handling, visualization, anatomy and pathology, general, private, undefinable). The operation was divided into six phases: start, dissection, clipping, separating, control, closing. Classification of the communication during two entire procedures showed that each phase of the operation was dominated by different kinds of communication. A high percentage of explaining anatomy and pathology was found throughout the whole procedure except for the control and closing phases. In the dissection phases, 60% of verbal communication concerned explaining. These explaining communication events were divided as follows: 27% operation method, 19% anatomy and pathology, 25% location (positioning of the instrument-tissue interaction), 15% direction (direction of tissue manipulation), 11% instrument handling, and 3% other nonclassified instructions. The proposed classification method is feasible for analyzing verbal communication during surgical procedures. Communication content objectively reflects the interaction between surgeon and resident. This

Collagen nerve guides for surgical repair of brachial plexus birth injury.

Science.gov (United States)

Ashley, William W; Weatherly, Trisha; Park, Tae Sung

2006-12-01

Standard brachial plexus repair techniques often involve autologous nerve graft placement and neurotization. However, when performed to treat severe injuries, this procedure can sometimes yield poor results. Moreover, harvesting the autologous graft is time-consuming and exposes the patient to additional surgical risks. To improve surgical outcomes and reduce surgical risks associated with autologous nerve graft retrieval and placement, the authors use collagen matrix tubes (Neurogen) instead of autologous nerve graft material. Between 1991 and 2005, the authors surgically treated 65 infants who had suffered brachial plexus injury at birth. During this time, seven patients were treated using collagen matrix tubes (Neurogen). This study is a retrospective analysis of the initial five patients who were treated using the tubes. Two patients underwent tube placement recently and were excluded from the analysis because of the inadequate follow-up period. Four of the five patients experienced a good recovery (motor scale composite [MSC] > 0.6), and three exhibited an excellent recovery (MSC > 0.75) at 2 years postoperatively. The MSC improved by an average of 69 and 78% at 1 and 2 years, respectively. The movement scores improved to greater than or equal to 50% range of motion in most patients, and the contractures were usually mild or moderate. Follow-up physical and occupational therapy evaluations confirm these patients' functional status. When last seen, four of five of these children could feed and dress themselves. Technically, the use of the collagen matrix tubes was straightforward and efficient, and there were no complications. The outcomes in this small series are encouraging.

X-Ray Diffraction and Fluorescence Instrument for Mineralogical Analysis at the Lunar Surface, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — We propose to develop a compact and lightweight X-Ray Diffraction (XRD) / X-Ray Fluorescence (XRF) instrument for analysis of mineralogical composition of regolith,...

High-resolution three-dimensional compositional imaging by double-pulse laser-induced breakdown spectroscopy

International Nuclear Information System (INIS)

Schiavo, C.; Grifoni, E.; Legnaioli, S.; Lorenzetti, G.; Poggialini, F.; Pagnotta, S.; Palleschi, V.; Menichetti, L.

2016-01-01

In this paper we present a new instrument specifically realized for high-resolution three-dimensional compositional analysis and mapping of materials. The instrument is based on the coupling of a Double-Pulse Laser-Induced Breakdown Spectroscopy (LIBS) instrument with an optical microscope. The compositional mapping of the samples is obtained by scanning the laser beam across the surface of the sample, while the in depth analysis is performed by sending multiple laser pulses on the same point. Depths of analysis of several tens of microns can be obtained. The instrument presented has definite advantages with respect to Laser Ablation-ICP Mass Spectrometry in many applications related to material analysis, biomedicine and environmental diagnostics. An application to the diagnostics of industrial ceramics is presented, demonstrating the feasibility of Double-Pulse LIBS Imaging and its advantages with respect to conventional single-pulse LIBS imaging.

[Surgical instruments and the emblems of Alsatien craftsmen and the archives of Obernai (16th-17th centuries)].

Science.gov (United States)

Muller, Christine

2011-01-01

This study presents some original data concerning the instruments used by Alsatian surgeons-barbers from the 16th to the 18th century. Emblems of professions frequently appear on private houses in Alsace, and 35 emblems of surgeons-barbers have been discovered; six, particularly chararacteristic, are analysed here (Soultz 1568, Marlenheim 1581, Sainte-Croix-en-Plaine 1587, Rosheim 1681, Rosheim 1733, and Wasselonne 1738). The razor (Schermesser), the lancet (Lanzette), and the "flame" (Lasseisen, Fliete) are the most frequently represented instruments. Unpublished inventories after death also bring instructive data and in particular those of the barbers Hans Artz of Molsheim (1597) and Jacob Pflieger of Obernai (c. 1608-1609). At last, are evoked unpublished mentions concerning two barbers originating from Obernai who exercised in Eastern Europe (Sebald Korn around 1583, and Johannes Baur around 1637).

Do Current Recommendations for Upper Instrumented Vertebra Predict Shoulder Imbalance? An Attempted Validation of Level Selection for Adolescent Idiopathic Scoliosis.

Science.gov (United States)

Bjerke, Benjamin T; Cheung, Zoe B; Shifflett, Grant D; Iyer, Sravisht; Derman, Peter B; Cunningham, Matthew E

2015-10-01

Shoulder balance for adolescent idiopathic scoliosis (AIS) patients is associated with patient satisfaction and self-image. However, few validated systems exist for selecting the upper instrumented vertebra (UIV) post-surgical shoulder balance. The purpose is to examine the existing UIV selection criteria and correlate with post-surgical shoulder balance in AIS patients. Patients who underwent spinal fusion at age 10-18 years for AIS over a 6-year period were reviewed. All patients with a minimum of 1-year radiographic follow-up were included. Imbalance was determined to be radiographic shoulder height |RSH| ≥ 15 mm at latest follow-up. Three UIV selection methods were considered: Lenke, Ilharreborde, and Trobisch. A recommended UIV was determined using each method from pre-surgical radiographs. The recommended UIV for each method was compared to the actual UIV instrumented for all three methods; concordance between these levels was defined as "Correct" UIV selection, and discordance was defined as "Incorrect" selection. One hundred seventy-one patients were included with 2.3 ± 1.1 year follow-up. For all methods, "Correct" UIV selection resulted in more shoulder imbalance than "Incorrect" UIV selection. Overall shoulder imbalance incidence was improved from 31.0% (53/171) to 15.2% (26/171). New shoulder imbalance incidence for patients with previously level shoulders was 8.8%. We could not identify a set of UIV selection criteria that accurately predicted post-surgical shoulder balance. Further validated measures are needed in this area. The complexity of proximal thoracic curve correction is underscored in a case example, where shoulder imbalance occurred despite "Correct" UIV selection by all methods.

Problems in instrumentation for S-odorant emissions

International Nuclear Information System (INIS)

Hall, H.J.

1974-01-01

Instrumentation to measure sulfur-containing odorants in stack emissions is much more difficult than in the ambient atmosphere, and must be matched to the specific source: key components aside from H 2 S are methyl mercaptan in paper mills, COS/CS 2 in a refinery Claus plant, and SO 2 /SO 3 in a combustion stack. Satisfactory operation for a period of six months was not achieved by any instrument in this service, in a lab and field evaluation of eight instruments of three types commercially available as of 1971. The effects of interferent gases H 2 O, SO 2 , CO 2 /CO and particulates which are diluted in ambient samples are greatly aggravated in stack gases, where the ratio of odorant to interferent may be 1:1000 or less, due to the very great sensitivity of human receptors to S-odorants. The most serious problem proved to be the analysis for odorless carbonyl sulfide, which is commonly formed where S compounds are oxidized in a reducing atmosphere. This COS has been undetected or mistaken for odorous H 2 S in most analyses. A field instrument for the general case would provide exactly simultaneous readings at five minute intervals or less for the five components H 2 S, SO 2 , COS, CSH, and total S, or their equivalent. This may be simplified to four components or less only when the composition of the sample gas is positively known

Determination of catalyst residues in hydrocarbon fuels by instrumental neutron activation analysis

International Nuclear Information System (INIS)

Burgess, D.D.

1982-01-01

A procedure has been developed for the determination of entrained catalytic cracking catalyst in hydrocarbon fuels. Aluminium is measured by instrumental neutron activation analysis and the amount of catalyst present is calculated from the amount of aluminium found and the known composition of the catalyst. Entrained catalyst may be determined at levels above 3 ppm with a precision of +-2%-25% according to sample composition. Only simple procedures are required. Vanadium may reduce sensitivity by dead time and pulse pile-up. No other interferences were observed. (author)

Using dummies for surgical skills training

DEFF Research Database (Denmark)

Langebæk, Rikke

2011-01-01

Effective acquisition of a skill requires practise. Therefore it is of great importance to provide veterinary students with opportunities to practice their surgical skills before carrying out surgical procedures on live patients. Some veterinary schools let students perform entire surgical...... procedures on research animals, in order to learn the basic skills along the way. From an ethical point of view it is questionable however to use live research animals for the sole purpose of practising surgery, and also, research animals are very costly. It is therefore necessary to identify alternative...... teaching methods for veterinary surgical training. At the Department of Small Animal Clinical Sciences, Faculty of Life Sciences, a number of low fidelity, stuffed toy animal dummies was developed for the Surgical Skills Lab in order to teach 4th year students the basic surgical skills. In the Surgical...

Some potentialities of instrumental implementation of quantitative phase analysis techniques for ferromagnetic materials on the basis of Moessbauer effect

International Nuclear Information System (INIS)

Danilov, G.I.; Mamikonyan, S.V.; Shlokov, G.N.

1973-01-01

In the article the results of work are presented on instrument development for quantitative phase analysis of ferromagnetic materials on the basis of using Moessbauer effect. Analysis of the defined ferromagnetic phase content in sample is carried out by spectrum band intensity of this phase, brought in paramagnetic state. Tyrical structural scheme of instrument model is presented, intended for control of degree of ferritization of ferrite compositions in the process of low temperature baking. Advantages of the proposed method and possibilities of increasing accuracy and sensitivity of particular instruments schemes are discussed. Advantages of using resonance detectors in the proposed method are shown. Sources, detectors and measurement schemes considered, allowed to use proposed quantitative phase analysis method for analysis of ferrite compositions by 40-65% of its possibilities

Single-stage transforaminal decompression, debridement, interbody fusion, and posterior instrumentation for lumbosacral brucellosis.

Science.gov (United States)

Abulizi, Yakefu; Liang, Wei-Dong; Muheremu, Aikeremujiang; Maimaiti, Maierdan; Sheng, Wei-Bin

2017-07-14

Spinal brucellosis is a less commonly reported infectious spinal pathology. There are few reports regarding the surgical treatment of spinal brucellosis in existing literature. This retrospective study was conducted to determine the effectiveness of single-stage transforaminal decompression, debridement, interbody fusion, and posterior instrumentation for lumbosacral spinal brucellosis. From February 2012 to April 2015, 32 consecutive patients (19 males and 13 females, mean age 53.7 ± 8.7) with lumbosacral brucellosis treated by transforaminal decompression, debridement, interbody fusion, and posterior instrumentation were enrolled. Medical records, imaging studies, laboratory data were collected and summarized. Surgical outcomes were evaluated based on visual analogue scale (VAS), Oswestry Disability Index (ODI) and Japanese Orthopaedic Association (JOA) scale. The changes in C-reactive protein (CRP) levels, erythrocyte sedimentation rate (ESR), clinical symptoms and complications were investigated. Graft fusion was evaluated using Bridwell grading criteria. The mean follow-up period was 24.9 ± 8.2 months. Back pain and radiating leg pain was relieved significantly in all patients after operation. No implant failures were observed in any patients. Wound infection was observed in two patients and sinus formation was observed in one patient. Solid bony fusion was achieved in 30 patients and the fusion rate was 93.8%. The levels of ESR and CRP were returned to normal by the end of three months' follow-up. VAS and ODI scores were significantly improved (P brucellosis.

The Effect of Patient-Specific Instrumentation Incorporating an Extramedullary Tibial Guide on Operative Efficiency for Total Knee Arthroplasty

Directory of Open Access Journals (Sweden)

Oh-Ryong Kwon

2017-01-01

Full Text Available This retrospective study was to determine if patient-specific instrumentation (PSI for total knee arthroplasty (TKA leads to shortened surgical time through increased operating room efficiency according to different tibial PSI designs. 166 patients underwent primary TKA and were categorized into three groups as follows: PSI without extramedullary (EM tibial guide (group 1, n=48, PSI with EM tibial guide (group 2, n=68, and conventional instrumentation (CI group (group 3, n=50. Four factors were compared between groups, namely, operative room time, thickness of bone resection, tibial slope, and rotation of the component. The mean surgical time was significantly shorter in the PSI with EM tibial guide group (group 2, 63.9±13.6 min compared to the CI group (group 3, 82.8±24.9 min (P<0.001. However, there was no significant difference in the PSI without EM tibial guide group (group 1, 75.3±18.8 min. This study suggests that PSI incorporating an EM tibial guide may lead to high operative efficiency in TKA compared to CI. This trial is registered with KCT0002384.

Combined Surgical Treatment of Gynecomastia

Directory of Open Access Journals (Sweden)

Yordanov Y.

2015-05-01

Full Text Available Surgical treatment of gynecomastia could present unique challenges for the plastic surgeon. Achieving a good balance between effectiveness of the selected approach and the satisfactory aesthetic outcome often is a difficult endeavor. Optimal surgical treatment involves a combination of liposuction and direct excision. In the present study the charts of 11 patients treated with suction-assisted liposuction and direct surgical excision were retrospectively reviewed; a special emphasis is placed on the surgical technique. The mean follow-up period of the patients was 11.6 months. No infection, hematoma, nipple-areola complex necrosis and nipple retraction was encountered in this series. The combined surgical treatment of gynecomastia has shown to be a reliable technique in both small and moderate breast enlargement including those with skin excess.

Simultaneous measurement of polymerization stress and curing kinetics for photo-polymerized composites with high filler contents.

Science.gov (United States)

Wang, Zhengzhi; Landis, Forrest A; Giuseppetti, Anthony A M; Lin-Gibson, Sheng; Chiang, Martin Y M

2014-12-01

Photopolymerized composites are used in a broad range of applications with their performance largely directed by reaction kinetics and contraction accompanying polymerization. The present study was to demonstrate an instrument capable of simultaneously collecting multiple kinetics parameters for a wide range of photopolymerizable systems: degree of conversion (DC), reaction exotherm, and polymerization stress (PS). Our system consisted of a cantilever beam-based instrument (tensometer) that has been optimized to capture a large range of stress generated by lightly-filled to highly-filled composites. The sample configuration allows the tensometer to be coupled to a fast near infrared (NIR) spectrometer collecting spectra in transmission mode. Using our instrument design, simultaneous measurements of PS and DC are performed, for the first time, on a commercial composite with ≈80% (by mass) silica particle fillers. The in situ NIR spectrometer collects more than 10 spectra per second, allowing for thorough characterization of reaction kinetics. With increased instrument sensitivity coupled with the ability to collect real time reaction kinetics information, we show that the external constraint imposed by the cantilever beam during polymerization could affect the rate of cure and final degree of polymerization. The present simultaneous measurement technique is expected to provide new insights into kinetics and property relationships for photopolymerized composites with high filler content such as dental restorative composites. Published by Elsevier Ltd.

Radioisotope instruments

CERN Document Server

Cameron, J F; Silverleaf, D J

1971-01-01

International Series of Monographs in Nuclear Energy, Volume 107: Radioisotope Instruments, Part 1 focuses on the design and applications of instruments based on the radiation released by radioactive substances. The book first offers information on the physical basis of radioisotope instruments; technical and economic advantages of radioisotope instruments; and radiation hazard. The manuscript then discusses commercial radioisotope instruments, including radiation sources and detectors, computing and control units, and measuring heads. The text describes the applications of radioisotop

A Literature Review of Renal Surgical Anatomy and Surgical Strategies for Partial Nephrectomy.

Science.gov (United States)

Klatte, Tobias; Ficarra, Vincenzo; Gratzke, Christian; Kaouk, Jihad; Kutikov, Alexander; Macchi, Veronica; Mottrie, Alexandre; Porpiglia, Francesco; Porter, James; Rogers, Craig G; Russo, Paul; Thompson, R Houston; Uzzo, Robert G; Wood, Christopher G; Gill, Inderbir S

2015-12-01

A detailed understanding of renal surgical anatomy is necessary to optimize preoperative planning and operative technique and provide a basis for improved outcomes. To evaluate the literature regarding pertinent surgical anatomy of the kidney and related structures, nephrometry scoring systems, and current surgical strategies for partial nephrectomy (PN). A literature review was conducted. Surgical renal anatomy fundamentally impacts PN surgery. The renal artery divides into anterior and posterior divisions, from which approximately five segmental terminal arteries originate. The renal veins are not terminal. Variations in the vascular and lymphatic channels are common; thus, concurrent lymphadenectomy is not routinely indicated during PN for cT1 renal masses in the setting of clinically negative lymph nodes. Renal-protocol contrast-enhanced computed tomography or magnetic resonance imaging is used for standard imaging. Anatomy-based nephrometry scoring systems allow standardized academic reporting of tumor characteristics and predict PN outcomes (complications, remnant function, possibly histology). Anatomy-based novel surgical approaches may reduce ischemic time during PN; these include early unclamping, segmental clamping, tumor-specific clamping (zero ischemia), and unclamped PN. Cancer cure after PN relies on complete resection, which can be achieved by thin margins. Post-PN renal function is impacted by kidney quality, remnant quantity, and ischemia type and duration. Surgical renal anatomy underpins imaging, nephrometry scoring systems, and vascular control techniques that reduce global renal ischemia and may impact post-PN function. A contemporary ideal PN excises the tumor with a thin negative margin, delicately secures the tumor bed to maximize vascularized remnant parenchyma, and minimizes global ischemia to the renal remnant with minimal complications. In this report we review renal surgical anatomy. Renal mass imaging allows detailed delineation of the

Nigerian Journal of Surgical Research

African Journals Online (AJOL)

The Nigerian Journal of Surgical Research is a publication of the Surgical Research Society with main office in Zaria, Nigeria. Zaria is home to Ahmadu Bello University (ABU), a premier university in Nigeria. The aim of The Nigerian Journal of Surgical Research is to cover developments and advances in the broad field of ...

Efficacy of humidity retention bags for the reduced adsorption and improved cleaning of tissue proteins including prion-associated amyloid to surgical stainless steel surfaces.

Science.gov (United States)

Secker, T J; Pinchin, H E; Hervé, R C; Keevil, C W

2015-01-01

Increasing drying time adversely affects attachment of tissue proteins and prion-associated amyloid to surgical stainless steel, and reduces the efficacy of commercial cleaning chemistries. This study tested the efficacy of commercial humidity retention bags to reduce biofouling on surgical stainless steel and to improve subsequent cleaning. Surgical stainless steel surfaces were contaminated with ME7-infected brain homogenates and left to dry for 15 to 1,440 min either in air, in dry polythene bags or within humidity retention bags. Residual contamination pre/post cleaning was analysed using Thioflavin T/SYPRO Ruby dual staining and microscope analysis. An increase in biofouling was observed with increased drying time in air or in sealed dry bags. Humidity retention bags kept both protein and prion-associated amyloid minimal across the drying times both pre- and post-cleaning. Therefore, humidity bags demonstrate a cheap, easy to implement solution to improve surgical instrument reprocessing and to potentially reduce associated hospital acquired infections.

Miniature surgical robots in the era of NOTES and LESS: dream or reality?

Science.gov (United States)

Zygomalas, Apollon; Kehagias, Ioannis; Giokas, Konstantinos; Koutsouris, Dimitrios

2015-02-01

Laparoscopy is an established method for the treatment of numerous surgical conditions. Natural orifice transluminal endoscopic surgery (NOTES) is a novel surgical technique that uses the natural orifices of the human body as entrances to the abdominal cavity. An alternative concept of minimally invasive approach to the abdominal cavity is to insert all the laparoscopic instruments through ports using a single small incision on the abdominal wall. A suggested name for this technique is laparoendoscopic single-site surgery (LESS). Considering the technical difficulties in NOTES and LESS and the progress in informatics and robotics, the use of robots seems ideal. The aim of this study is to investigate if there is at present, a realistic possibility of using miniature robots in NOTES or LESS in daily clinical practice. An up-to-date review on in vivo surgical miniature robots is made. A Web-based research of the English literature up to March 2013 using PubMed, Scopus, and Google Scholar as search engines was performed. The development of in vivo miniature robots for use in NOTES or LESS is a reality with great advancements, potential advantages, and possible application in minimally invasive surgery in the future. However, true totally NOTES or LESS procedures on humans using miniature robots either solely or as assistance, remain a dream at present. © The Author(s) 2014.

Adolescent idiopathic scoliosis patients report increased pain at five years compared with two years after surgical treatment.

Science.gov (United States)

Upasani, Vidyadhar V; Caltoum, Christine; Petcharaporn, Maty; Bastrom, Tracey P; Pawelek, Jeff B; Betz, Randal R; Clements, David H; Lenke, Lawrence G; Lowe, Thomas G; Newton, Peter O

2008-05-01

A multicenter study of changes in Scoliosis Research Society (SRS) outcome measures after surgical treatment of adolescent idiopathic scoliosis (AIS). To evaluate changes in patient determined outcome measures between 2 and 5 years after AIS surgery. Current surgical procedures have been shown to improve subjective measures in patients with AIS. At 2-year follow-up, AIS patients reported significant improvement in all 4 preoperative domains of the SRS questionnaire. In addition, the major Cobb angle was shown to be negatively correlated with preoperative scores in the pain, general self-image, and general function domains. Five-year SRS scores have not been evaluated previously. A multicenter, prospectively generated database was used to obtain perioperative, radiographic, and SRS-24 outcomes data. The inclusion criteria were: a diagnosis of AIS, surgical treatment (anterior, posterior, or combined), a comprehensive set of radiographic measures, and completed preoperative, 2-year, and 5-year SRS questionnaires. Repeated measures analysis of variance was used to compare changes in patient responses for each of the 7 outcome domains. Univariate analysis of variance was used to compare the change in pain score at 5 years to the level of the lowest instrumented vertebrae and surgical approach. A correlation analysis was used to determine the association between changes in any of the radiographic variables and changes in SRS scores. The data were checked for normality and equal variances, and the level of significance was set at P < 0.01. Forty-nine patients (42 women, 7 men; 14.2 +/- 2.1 year old; 5.4 +/- 0.6 years follow-up) met the inclusion criteria for this study. Thirty-seven of 49 (76%) of these patients underwent an open or thoracoscopic anterior procedure. SRS-24 scores improved significantly in 3 of the 4 preoperative domains at the 2-year visit. At 5 years postop, a statistically significant decrease in the pain score (4.2 +/- 0.6 to 3.9 +/- 0.9, P = 0

What evidence is there for the use of workplace-based assessment in surgical training?

Science.gov (United States)

Shalhoub, Joseph; Vesey, Alex Thomas; Fitzgerald, James Edward Frankland

2014-01-01

Recent years have seen broad changes in postgraduate training with a move toward structured formative and summative evaluation of trainees' competencies using workplace-based assessment (WBA) tools. The fitness for purpose of these instruments in surgery has been much debated. The aim of this study is to explore the evidence underlying the introduction and ongoing use of WBAs in surgical training. A critical literature review was conducted to identify studies evaluating the use of WBAs in postgraduate surgical training. The search was conducted using the electronic databases PubMed for full-text articles in English. Additional critical evaluations of the curriculum relating to WBAs were included. The articles were synthesized in a narrative review. The implementation of WBA requirements in surgical training has occurred despite a relative dearth of direct evidence of their efficacy and benefit. Studies and critical reviews are being regularly undertaken to ensure that supporting evidence is accrued and the drive for improvement and refinement is maintained. It is emerging that WBAs are (contrary to their current nomenclature) formative tools for feedback and hence learning. They can facilitate the progression toward expert practice at the center of the zone of proximal development and the higher levels of Miller's pyramid, but fall short--owing to their focus on competence--of guiding surgical trainees to the higher levels of Maslow's hierarchy. Limited evidence has potentially undermined the introduction of WBAs in surgical training to date. There are misunderstandings regarding their use as either summative or formative educational tools. These shortcomings are an opportunity for further work in examining WBAs in their current or modified form. Copyright © 2014 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Measuring Error Identification and Recovery Skills in Surgical Residents.

Science.gov (United States)

Sternbach, Joel M; Wang, Kevin; El Khoury, Rym; Teitelbaum, Ezra N; Meyerson, Shari L

2017-02-01

Although error identification and recovery skills are essential for the safe practice of surgery, they have not traditionally been taught or evaluated in residency training. This study validates a method for assessing error identification and recovery skills in surgical residents using a thoracoscopic lobectomy simulator. We developed a 5-station, simulator-based examination containing the most commonly encountered cognitive and technical errors occurring during division of the superior pulmonary vein for left upper lobectomy. Successful completion of each station requires identification and correction of these errors. Examinations were video recorded and scored in a blinded fashion using an examination-specific rating instrument evaluating task performance as well as error identification and recovery skills. Evidence of validity was collected in the categories of content, response process, internal structure, and relationship to other variables. Fifteen general surgical residents (9 interns and 6 third-year residents) completed the examination. Interrater reliability was high, with an intraclass correlation coefficient of 0.78 between 4 trained raters. Station scores ranged from 64% to 84% correct. All stations adequately discriminated between high- and low-performing residents, with discrimination ranging from 0.35 to 0.65. The overall examination score was significantly higher for intermediate residents than for interns (mean, 74 versus 64 of 90 possible; p = 0.03). The described simulator-based examination with embedded errors and its accompanying assessment tool can be used to measure error identification and recovery skills in surgical residents. This examination provides a valid method for comparing teaching strategies designed to improve error recognition and recovery to enhance patient safety. Copyright © 2017 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

American Pediatric Surgical Association

Science.gov (United States)

American Pediatric Surgical Association Search for: Login Resources + For Members For Professionals For Training Program Directors For Media For ... Surgical Outcomes Surveys & Results Publications Continuing Education + ExPERT Pediatric Surgery NaT Annual Meeting CME MOC Requirements Residents / ...

PECULIARITIES OF PROGRAMME MUSIC IN THE INSTRUMENTAL SUITE OF COMPOSERS FROM THE REPUBLIC OF MOLDOVA

Directory of Open Access Journals (Sweden)

BEREZOVICOVA TATIANA

2015-09-01

Full Text Available The article is dedicated to the study of the instrumental suites written by native composers from the point of view of the realization of programme music. The author analyses different kinds of programme music such as genre, stylistic, pictorial (without any subject, with a generalized subject, with a concrete subject, as well as latent programme music, felt in some non-programme compositions declared and expressed through specific instrumental means.

The Surgical Safety Checklist and Teamwork Coaching Tools: a study of inter-rater reliability.

Science.gov (United States)

Huang, Lyen C; Conley, Dante; Lipsitz, Stu; Wright, Christopher C; Diller, Thomas W; Edmondson, Lizabeth; Berry, William R; Singer, Sara J

2014-08-01

To assess the inter-rater reliability (IRR) of two novel observation tools for measuring surgical safety checklist performance and teamwork. Data surgical safety checklists can promote adherence to standards of care and improve teamwork in the operating room. Their use has been associated with reductions in mortality and other postoperative complications. However, checklist effectiveness depends on how well they are performed. Authors from the Safe Surgery 2015 initiative developed a pair of novel observation tools through literature review, expert consultation and end-user testing. In one South Carolina hospital participating in the initiative, two observers jointly attended 50 surgical cases and independently rated surgical teams using both tools. We used descriptive statistics to measure checklist performance and teamwork at the hospital. We assessed IRR by measuring percent agreement, Cohen's κ, and weighted κ scores. The overall percent agreement and κ between the two observers was 93% and 0.74 (95% CI 0.66 to 0.79), respectively, for the Checklist Coaching Tool and 86% and 0.84 (95% CI 0.77 to 0.90) for the Surgical Teamwork Tool. Percent agreement for individual sections of both tools was 79% or higher. Additionally, κ scores for six of eight sections on the Checklist Coaching Tool and for two of five domains on the Surgical Teamwork Tool achieved the desired 0.7 threshold. However, teamwork scores were high and variation was limited. There were no significant changes in the percent agreement or κ scores between the first 10 and last 10 cases observed. Both tools demonstrated substantial IRR and required limited training to use. These instruments may be used to observe checklist performance and teamwork in the operating room. However, further refinement and calibration of observer expectations, particularly in rating teamwork, could improve the utility of the tools. Published by the BMJ Publishing Group Limited. For permission to use (where not already

Instrument Remote Control via the Astronomical Instrument Markup Language

Science.gov (United States)

Sall, Ken; Ames, Troy; Warsaw, Craig; Koons, Lisa; Shafer, Richard

1998-01-01

The Instrument Remote Control (IRC) project ongoing at NASA's Goddard Space Flight Center's (GSFC) Information Systems Center (ISC) supports NASA's mission by defining an adaptive intranet-based framework that provides robust interactive and distributed control and monitoring of remote instruments. An astronomical IRC architecture that combines the platform-independent processing capabilities of Java with the power of Extensible Markup Language (XML) to express hierarchical data in an equally platform-independent, as well as human readable manner, has been developed. This architecture is implemented using a variety of XML support tools and Application Programming Interfaces (API) written in Java. IRC will enable trusted astronomers from around the world to easily access infrared instruments (e.g., telescopes, cameras, and spectrometers) located in remote, inhospitable environments, such as the South Pole, a high Chilean mountaintop, or an airborne observatory aboard a Boeing 747. Using IRC's frameworks, an astronomer or other scientist can easily define the type of onboard instrument, control the instrument remotely, and return monitoring data all through the intranet. The Astronomical Instrument Markup Language (AIML) is the first implementation of the more general Instrument Markup Language (IML). The key aspects of our approach to instrument description and control applies to many domains, from medical instruments to machine assembly lines. The concepts behind AIML apply equally well to the description and control of instruments in general. IRC enables us to apply our techniques to several instruments, preferably from different observatories.

A comparative study of colour and perfusion between two different post surgical scars. Do the laser Doppler imager and the colorimeter measure the same features of a scar?

Science.gov (United States)

Mermans, J F; Peeters, W J; Dikmans, R; Serroyen, J; van der Hulst, R R J W; Van den Kerckhove, E

2013-05-01

The purpose of this study was to investigate the influence of different located post surgical scars on both perfusion and redness. The pattern of change and correlation between perfusion and redness of post surgical scars is also examined. In this study, we measured redness and perfusion of the abdominal and breast scar of 24 women undergoing breast reconstruction with Deep Inferior Epigastric Perforator Free Flap surgery with the Minolta Chromameter CR-400/410 and the Moor Instruments laser Doppler imager 12IR, respectively, at different intervals post-operatively. The laser Doppler imager gives significantly higher values for the abdominal compared with the breast scar. There was no consistent correlation found between perfusion and redness at the different test moments for both locations. The scores of both parameters were significantly associated after 9 months follow-up for both locations. Scars closed with higher mechanical force show higher perfusion and prolonged activity; and more redness is associated with more perfusion for both post surgical scars. Nevertheless, there was no consistent correlation found between these parameters making the laser Doppler imager and the Colorimeter still non-replaceable instruments. © 2013 John Wiley & Sons A/S. Published by Blackwell Publishing Ltd.

Urogynecologic Surgical Mesh Implants

Science.gov (United States)

... procedures performed to treat pelvic floor disorders with surgical mesh: Transvaginal mesh to treat POP Transabdominal mesh to treat ... address safety risks Final Order for Reclassification of Surgical Mesh for Transvaginal Pelvic Organ Prolapse Repair Final Order for Effective ...

An Application of Smart Composite for Health Monitoring

Energy Technology Data Exchange (ETDEWEB)

Lee, Jin Kyung; Lee, Sang Pill [Dongeui University, Busan (Korea, Republic of); Ha, Young Joon; Lee, Joon Hyun [Pusan National University, Busan (Korea, Republic of); Park, Young Chul [Donga University, Busan (Korea, Republic of)

2007-08-15

One of main advantages of composite using smart material as reinforcement can be controlled cracks behavior inside the composite. If the smart composite is applied as part of the structure, the use of the shape memory effect of the smart material is the best way to protect the propagation of cracks generated in the structure while use. In this study, the optical manufacturing conditions for the smart composite were derived. In order to evaluate the shape memory effect by shape memory alloy, the tensile load was applied to the smart composite and stress distribution was inspected. And then, the smart composite was heated to a certain temperature and the shape memory alloy would shrink to the original shape. Finally, at this point the recovering status of stress using photoelastic instrument was discussed

An Application of Smart Composite for Health Monitoring

International Nuclear Information System (INIS)

Lee, Jin Kyung; Lee, Sang Pill; Ha, Young Joon; Lee, Joon Hyun; Park, Young Chul

2007-01-01

One of main advantages of composite using smart material as reinforcement can be controlled cracks behavior inside the composite. If the smart composite is applied as part of the structure, the use of the shape memory effect of the smart material is the best way to protect the propagation of cracks generated in the structure while use. In this study, the optical manufacturing conditions for the smart composite were derived. In order to evaluate the shape memory effect by shape memory alloy, the tensile load was applied to the smart composite and stress distribution was inspected. And then, the smart composite was heated to a certain temperature and the shape memory alloy would shrink to the original shape. Finally, at this point the recovering status of stress using photoelastic instrument was discussed

Surgical treatment of parastomal hernia

International Nuclear Information System (INIS)

Basti, Z.; Mayer, A.

2013-01-01

Stoma construction is among standard surgical skills and is performed for many indications. Every stoma means huge impact on quality of life for patients even with great improvement in surgical technique and ostomy devices. All patients are very sensitive to complication of stoma and the most frequent complication is parastomal hernia. Incidence reported in literature is very high and unacceptable, it is 30-70%. Surgical approach is very demanding on technical equipment and experiences of surgeon. Authors focus on each surgical approach for treating this complication weather it´s using mesh or laparoscopic or open approach. (author)

Surgical therapy in chronic pancreatitis.

Science.gov (United States)

Neal, C P; Dennison, A R; Garcea, G

2012-12-01

Chronic pancreatitis (CP) is an inflammatory disease of the pancreas which causes chronic pain, as well as exocrine and endocrine failure in the majority of patients, together producing social and domestic upheaval and a very poor quality of life. At least half of patients will require surgical intervention at some stage in their disease, primarily for the treatment of persistent pain. Available data have now confirmed that surgical intervention may produce superior results to conservative and endoscopic treatment. Comprehensive individual patient assessment is crucial to optimal surgical management, however, in order to determine which morphological disease variant (large duct disease, distal stricture with focal disease, expanded head or small duct/minimal change disease) is present in the individual patient, as a wide and differing range of surgical approaches are possible depending upon the specific abnormality within the gland. This review comprehensively assesses the evidence for these differing approaches to surgical intervention in chronic pancreatitis. Surgical drainage procedures should be limited to a small number of patients with a dilated duct and no pancreatic head mass. Similarly, a small population presenting with a focal stricture and tail only disease may be successfully treated by distal pancreatectomy. Long-term results of both of these procedure types are poor, however. More impressive results have been yielded for the surgical treatment of the expanded head, for which a range of surgical options now exist. Evidence from level I studies and a recent meta-analysis suggests that duodenum-preserving resections offer benefits compared to pancreaticoduodenectomy, though the results of the ongoing, multicentre ChroPac trial are awaited to confirm this. Further data are also needed to determine which of the duodenum-preserving procedures provides optimal results. In relation to small duct/minimal change disease total pancreatectomy represents the only

New methods of magnet-based instrumentation for NOTES.

Science.gov (United States)

Magdeburg, Richard; Hauth, Daniel; Kaehler, Georg

2013-12-01

Laparoscopic surgery has displaced open surgery as the standard of care for many clinical conditions. NOTES has been described as the next surgical frontier with the objective of incision-free abdominal surgery. The principal challenge of NOTES procedures is the loss of triangulation and instrument rigidity, which is one of the fundamental concepts of laparoscopic surgery. To overcome these problems necessitates the development of new instrumentation. material and methods: We aimed to assess the use of a very simple combination of internal and external magnets that might allow the vigorous multiaxial traction/counter-traction required in NOTES procedures. The magnet retraction system consisted of an external magnetic assembly and either small internal magnets attached by endoscopic clips to the designated tissue (magnet-clip-approach) or an endoscopic grasping forceps in a magnetic deflector roll (magnet-trocar-approach). We compared both methods regarding precision, time and efficacy by performing transgastric partial uterus resections with better results for the magnet-trocar-approach. This proof-of-principle animal study showed that the combination of external and internal magnets generates sufficient coupling forces at clinically relevant abdominal wall thicknesses, making them suitable for use and evaluation in NOTES procedures, and provides the vigorous multiaxial traction/counter-traction required by the lack of additional abdominal trocars.

Accomplishments and challenges of surgical simulation.

Science.gov (United States)

Satava, R M

2001-03-01

For nearly a decade, advanced computer technologies have created extraordinary educational tools using three-dimensional (3D) visualization and virtual reality. Pioneering efforts in surgical simulation with these tools have resulted in a first generation of simulators for surgical technical skills. Accomplishments include simulations with 3D models of anatomy for practice of surgical tasks, initial assessment of student performance in technical skills, and awareness by professional societies of potential in surgical education and certification. However, enormous challenges remain, which include improvement of technical fidelity, standardization of accurate metrics for performance evaluation, integration of simulators into a robust educational curriculum, stringent evaluation of simulators for effectiveness and value added to surgical training, determination of simulation application to certification of surgical technical skills, and a business model to implement and disseminate simulation successfully throughout the medical education community. This review looks at the historical progress of surgical simulators, their accomplishments, and the challenges that remain.

Neuroendoscopic Trans-Third Ventricular Approach for Surgical Management of Ecchordosis Physaliphora.

Science.gov (United States)

Adib, Sasan Darius; Bisdas, Sotirios; Bornemann, Antje; Schuhmann, Martin U

2016-06-01

We sought to report the successful surgical management of a case of ecchordosis physaliphora (EP) using a neuro-endoscopic trans-third ventricular approach (ETTVA) and to provide a current review of literature on EP. A 57-year-old man presenting with a 2-year history of diplopia due to right abducens nerve palsy and paresthesia of the left body underwent magnetic resonance imaging, which revealed a retroclival intracisternal lesion. The cystic lesion was considered to be most likely EP according to neuroradiologic features. The patient underwent an endoscopic trans-third ventricular resection. A pediatric endoscope was passed from a precoronal burr hole through the left lateral into the third ventricle. The floor of the third ventricle was opened by a 2-micron laser. This approach permitted us to expose the lesion in the retroclival cistern and follow up with a subtotal removal. Remnants of the capsule, which were firmly adherent to small pontine arteries and the left abducens nerve, were left. Histology confirmed EP. The patient recovered well from surgery, and symptoms regressed at clinical follow-up. The endoscopic approach for third ventriculostomy can also be used for the surgical management of retroclival lesions. However, a small pediatric endoscope with an angled view, which can be passed through the floor of the third ventricle without causing harm, is mandatory to explore all important structures in the narrow surgical space. Limitations in this delicate environment are firm adhesions to vessels and nerves because only 1-instrument manipulation is possible and bleeding must be avoided. Copyright © 2016 Elsevier Inc. All rights reserved.

Surgical Space Suits Increase Particle and Microbiological Emission Rates in a Simulated Surgical Environment.

Science.gov (United States)

Vijaysegaran, Praveen; Knibbs, Luke D; Morawska, Lidia; Crawford, Ross W

2018-05-01

The role of space suits in the prevention of orthopedic prosthetic joint infection remains unclear. Recent evidence suggests that space suits may in fact contribute to increased infection rates, with bioaerosol emissions from space suits identified as a potential cause. This study aimed to compare the particle and microbiological emission rates (PER and MER) of space suits and standard surgical clothing. A comparison of emission rates between space suits and standard surgical clothing was performed in a simulated surgical environment during 5 separate experiments. Particle counts were analyzed with 2 separate particle counters capable of detecting particles between 0.1 and 20 μm. An Andersen impactor was used to sample bacteria, with culture counts performed at 24 and 48 hours. Four experiments consistently showed statistically significant increases in both PER and MER when space suits are used compared with standard surgical clothing. One experiment showed inconsistent results, with a trend toward increases in both PER and MER when space suits are used compared with standard surgical clothing. Space suits cause increased PER and MER compared with standard surgical clothing. This finding provides mechanistic evidence to support the increased prosthetic joint infection rates observed in clinical studies. Copyright © 2017 Elsevier Inc. All rights reserved.

Teaching surgical exposures to undergraduate medical students: an integration concept for anatomical and surgical education.

Science.gov (United States)

Hammer, Niels; Hepp, Pierre; Löffler, Sabine; Schleifenbaum, Stefan; Steinke, Hanno; Klima, Stefan

2015-06-01

Decreasing numbers of students are interested in starting a surgical career, posing substantial challenges to patient care in the next years. The anatomy course is one of the key subjects in medical training, especially in surgical disciplines. Innovative teaching concepts that integrate surgically relevant anatomy and manual dexterity might help boost student interest in surgery. A preclinical workshop entitled "Surgical exposures" was developed. A team of anatomists and surgeons introduced the surgical exposures, demonstrating the procedures on Thiel-fixed body donors. Following this introduction, students practiced the exposures in an operating room-like manner. A six-point Likert scale was used to evaluate the workshop and to compare it to the first-year dissection course. The overall evaluation result for the surgical exposures was excellent, proving to be a significantly better result when compared to the first-year dissection course. The students were more satisfied with the teaching time invested by the peers and regarded the workshop as clinically highly relevant. Furthermore, they felt that questions were addressed better and that the overall atmosphere was better than in the gross anatomy course. Subject to criticism was the course size and practicing time in both cases. The surgical exposures workshop provides preclinical students with clinically relevant anatomy and manual dexterity. It may positively influence the decision to follow a surgical career. This course, however, requires extensive teaching resources. The given concept may help implement practical medical skills in the preclinical curriculum, strengthening the professional identity of surgeons and anatomists.

Surface characterization of retinal tissues for the enhancement of vitreoretinal surgical methods

Science.gov (United States)

Valentin-Rodriguez, Celimar

Diabetic retinopathy is the most common ophthalmic complication of diabetes and the leading cause of blindness among adults, ages 30 to 70. Surgery to remove scar tissue in the eye is the only corrective treatment once the retina is affected. Visual recovery is often hampered by retinal trauma during surgery and by low patient compliance. Our work in this project aimed to improve vitreoretinal surgical methods from information gathered by sensitive surface analysis of pre-retinal tissues found at the vitreoretinal interface. Atomic force microscopy characterization of human retinal tissues revealed that surgically excised inner limiting membrane (ILM) has a heterogeneous surface and is mainly composed of globular and fibrous structures. ILM tissues also show low adhesion for clean unmodified surfaces as opposed to those with functional groups attractive to those on the ILM surface, due to their charge. Based on these observations, layer-by-layer films with embedded gold nanoparticles with a positive outer charge were designed. These modifications increased the adhesion between surgical instruments and ILM by increasing the roughness and tuning the film surface charge. These films proved to be stable under physiological conditions. Finally, the effect of vital dyes on the topographical characteristics of ILMs was characterized and new imaging modes to further reveal ILM topography were utilized. Roughness and adhesion force data suggest that second generation dyes have no effect on the surface nanostructure of ILMs, but increase adhesion at the tip sample interface. This project clearly illustrates that physicochemical information from tissues can be used to rationally re-design surgical procedures, in this case for tissue removal purposes. This rational design method can be applied to other soft tissue excision procedures as is the case of cataract surgery or laparoscopic removal of endometrial tissue.

Efficiency of composite tests in gastroentestinal cancer

International Nuclear Information System (INIS)

Christensen, M.; Jacobsen, P.M.

1987-01-01

The efficiency of composite tests (liver scintigraphy, serum alkaline phosphatase, and serum carcinoembryonic antigen) in findings or excluding liver metastases preoperatively was evaluated in 185 surgical patients with high probability for gastrointestinal cancer, 142 with colorectal and 43 with gastric disorders. A pathoanatomic verification procedure showed liver metastases in 21 and 7 patients, respectively. For each test two cut-off levels were defined in accordance with the operational purpose of the test: either to diagnose metastases (no false-positive test results) or to exclude metastases (no false-negative test results). Generally, composite tests increased overall efficiency. In the colorectal group 39% of the patients were correctly classified by the combined, triple test; in the gastric group 94% were correctly classified. It is concluded that composite tests seem useful, and the operational approach described may be helpful in decision-making and test evaluation

In vitro histological evaluation of the surgical margins made by different laser wavelengths in tongue tissues

Science.gov (United States)

Azevedo, Ana-Salvaterra; Ferreira, Fernando; Delgado, Maria-Leonor; Garcês, Fernanda; Carreira, Sofia; Martins, Marco; Suarez-Quintanilla, Juan

2016-01-01

Background Lasers have become standard tools for the surgical treatment of oral lesions. The purpose of this study is to determine the surgical margins and histologically evaluate the tissue thermal effects induced by different types of surgical instruments. Material and Methods Cuts were made in pork tongues’ mucosa with different lasers (Er:YAG at 2W with and without air / water spray and at 4W with and without air / water spray; CO2 at 3.5W and 7W in pulsed mode and at 7W in continuous mode; the diode laser at 3.5W and boost 3.5W in pulsed mode; Nd:YAG at 6W, 40Hz and electroscalpel at 5W and conventional scalpel as control. Macroscopic and microscopic morphological changes were evaluated. Results The results of this study showed that the surgical instruments that caused greater tissue damage extension were: the Nd:YAG laser (670.68μm), the diode 3.5W and boost PW (626.82μm), the CO2 7W CW (571.18μm), the CO2 at 7W PW (485.45μm), the diode 3.5W PW (456.15μm), the electroscalpel (409.57μm) and lastly the CO2 laser 3.5W PW (306.19μm) and Er:YAG (74.66μm) laser, regardless of power, mode or air / water spray used. An association between the Tissue Damage Extension and the Degree of Carbonization (r = 0.789; P = 0.01), and an association between the Tissue Damage Extension and Regularity of the Incision were found (r = -, 299; P = 0.01). Conclusions The results of this study suggest that lasers can be used in soft tissues biopsies of the oral cavity, enabling a correct histopathological analysis, as long as the biological effects of each laser type are considered. The Er:YAG laser revealed its potential for biopsies of the oral mucosa ensuring a successful histological evaluation and the CO2 laser at 3,5W in pulsed mode presented itself as the best choice for surgeries with hemostasis. Key words:CO2 laser, diode laser, Er:YAG laser, laser surgery, Nd:YAG laser, oral mucosa, thermal effect. PMID:27703606

Instrumentation

International Nuclear Information System (INIS)

Umminger, K.

2008-01-01

A proper measurement of the relevant single and two-phase flow parameters is the basis for the understanding of many complex thermal-hydraulic processes. Reliable instrumentation is therefore necessary for the interaction between analysis and experiment especially in the field of nuclear safety research where postulated accident scenarios have to be simulated in experimental facilities and predicted by complex computer code systems. The so-called conventional instrumentation for the measurement of e. g. pressures, temperatures, pressure differences and single phase flow velocities is still a solid basis for the investigation and interpretation of many phenomena and especially for the understanding of the overall system behavior. Measurement data from such instrumentation still serves in many cases as a database for thermal-hydraulic system codes. However some special instrumentation such as online concentration measurement for boric acid in the water phase or for non-condensibles in steam atmosphere as well as flow visualization techniques were further developed and successfully applied during the recent years. Concerning the modeling needs for advanced thermal-hydraulic codes, significant advances have been accomplished in the last few years in the local instrumentation technology for two-phase flow by the application of new sensor techniques, optical or beam methods and electronic technology. This paper will give insight into the current state of instrumentation technology for safety-related thermohydraulic experiments. Advantages and limitations of some measurement processes and systems will be indicated as well as trends and possibilities for further development. Aspects of instrumentation in operating reactors will also be mentioned.

Surgical ethics: surgical virtue and more.

Science.gov (United States)

Vercler, Christian J

2015-01-01

The encounter between a patient and her surgeon is unique for several reasons. The surgeon inflicts pain upon a patient for the patient's own good. An operative intervention is irreducibly personal, such that the decisions about and performance of operations are inseparable from the idiosyncrasies of the individual surgeon. Furthermore, there is a chasm of knowledge between the patient and surgeon that is difficult to cross. Hence, training in the discipline of surgery includes the inculcation of certain virtues and practices to safeguard against abuses of this relationship and to make sure that the best interests of the patient are prioritized. The stories in this issue are evidence that in contemporary practice this is not quite enough, as surgeons reflect on instances they felt were ethically challenging. Common themes include the difficulty in communicating surgical uncertainty, patient-surgeon relationships, ethical issues in surgical training, and the impact of the technological imperative on caring for dying patients.

Duration of orthognathic-surgical treatment.

Science.gov (United States)

Paunonen, Jaakko; Helminen, Mika; Peltomäki, Timo

2017-07-01

The objective of this study was to determine the duration of orthognathic-surgical treatment conducted with conventional pre- and post-surgical orthodontic treatment phases. The study material was comprised of the files of 185 consecutive patients treated in Oral and Maxillofacial Unit, Tampere University Hospital, Finland, in 2007-2014. The files were reviewed and the following data was obtained: gender and age of patients, ICD-10 diagnosis, type of malocclusion, duration of pre- and post-surgical orthodontic treatment and type of operation. Total treatment duration (median) from placement of separating rings for banding until fixed orthodontic appliances were removed and retention period started was 31.1 months, of which pre-surgical orthodontics took 24.4 months and postsurgical 6.4 months. Treatment duration (median) was in BSSO was 32.1, LeFort 1 30.1 and bimaxillary osteotomy 29.7 months. Orthodontic extractions were performed in 35 patients (19%). If the orthodontic treatment included tooth extraction, the duration of pre-surgical treatment was on average 10 months longer, which is a statistically highly significant difference (p pre-surgical orthodontic treatment prolong treatment time by an average of 8-9 months.

Influence of endodontic instrument-holder on sterilization efficacy. A pilot in-vitro study.

Directory of Open Access Journals (Sweden)

Angelo Carrizo

2013-08-01

Full Text Available Infection control is crucial in dentistry and various methods have been designed to assure its efficacy. However, little information exists regarding the influence it could have the instrument-holder of endodontic files. The aim of this research was to determine the influence of three instruments-holders on sterilization efficacy of endodontic files. Methods: A pilot in-vitro study. 60 endodontic files were contaminated by biomechanical preparation of extracted molars with periapical abscess, then processed according to the standard washing method. The endodontic files were divided into 3 groups (n=20 and assigned to 3 instrument-holders: Metallic box (MB, surgical gauze (SG and synthetic sponge (SS. Then, the files were packaged and sterilized by autoclaving (134°C/45min. Microbiological culture was performed in thioglycolate solution for each endodontic file (37ºC/5days. Results: The overall sterilization efficacy was 91.7%, 80% for MB, 100% for SS, and 95% for SG, with no statistically significant differences (p=0.06 between the groups. Conclusions: The lack of differences in the efficacy of sterilization may be due to the reduced sample; therefore, a full-size study is necessary to confirm this outcomes. The results of this study discourage the use of the MB as instrument-holder until a full-size study can confirm this data.

Aggressive surgical management of craniopharyngiomas

Directory of Open Access Journals (Sweden)

Manmohan Singh

2013-01-01

Full Text Available Surgical treatment of craniopharyngiomas is challenging and despite advancements it continues to pose a challenge. Proponents of subtotal resection in conjunction with radiotherapy argue that this less aggressive approach can yield appropriate results with the lower morbidity. On the contrary, other argument is that gross total resection is superior. Though surgical management of craniopharyngioma is challenging due to its location and important surrounding neurovascular structures, optimal surgical results can be expected following radical surgical excision. Radical excision of craniopharyngiomas is associated with excellent long-term recurrence free survival. Radiation induced long-term complications can be altogether avoided by excising these tumors completely.

Piezosurgery or conventional rotatory instruments for inferior third molar extractions?

Science.gov (United States)

Piersanti, Luigi; Dilorenzo, Matteo; Monaco, Giuseppe; Marchetti, Claudio

2014-09-01

The purpose of this study was to compare the discomfort and surgical outcomes of a piezosurgery device with those of rotatory instruments in lower third molar extraction. A split-mouth, randomized, unblinded clinical study was designed; the 2 molars had to have the same extraction difficulty score. The test side was extracted using a piezosurgery technique and the control side was extracted using a conventional handpiece. The primary endpoint was patient discomfort evaluated with the Postoperative Symptom Severity (PoSSe) scale, which was administered to each patient; secondary endpoints were pain, trismus, swelling, and surgical time evaluation. Paired-samples t test and repeated-measures analysis of variance were used to compare outcomes within patients. Ten consecutive patients (6 female, 4 male; mean age, 22.4 ± 2.3 yr) were recruited. The total score on the PoSSe scale was significantly lower for piezosurgery compared with the conventional rotating handpiece (24.7 ± 10.3 vs 36.0 ± 7.6; t = -4.27; P = .002). Moreover, postoperative swelling 1 week after surgery was significantly lower for piezosurgery than for the conventional rotating handpiece (2.75 ± 0.23 vs 3.1 ± 0.39 cm; t = -2.63; P = .027). Piezosurgery was associated with less postoperative discomfort and yielded better results for swelling. Piezosurgery seems to be a good technique in daily surgical practice, especially if applied in the critical steps in which safety and respect for soft tissue, bone, and nerves are necessary. Copyright © 2014 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Negative Pressure Wound Therapy in Infected Wound following Posterior Spinal Instrumentation using Simple Self-assembled System: A Case Report

Directory of Open Access Journals (Sweden)

CW Chang

2014-07-01

Full Text Available Postoperative wound infection in an instrumented spine patient is often disastrous. Management includes implant removal leading to spine instability. Negative pressure wound therapy (NPWT applied to the spine surgical wound is one of the wound care technique with successful results. We report a case of a man who sustained Chance fracture of Lumbar 1 (L1 vertebra treated with long segment posterior instrumentation, who unfortunately developed Extended-spectrum beta-lactamase (ESBL positive E. coli infection one month after the operation. After careful debridement of the wound, the implant became exposed. Three cycles of NPWT were applied and the wound healed with granulation tissue completely covering the implant, and thus negating the need to remove the implant. In conclusion, the NPWT is a good alternative in postoperative wound management especially in an instrumented spine patient.