WorldWideScience

Sample records for surgery devices panel

  1. 78 FR 16684 - General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee; Notice of...

    Science.gov (United States)

    2013-03-18

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2013-N-0001] General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting AGENCY: Food and Drug Administration, HHS. ACTION: Notice. This notice announces a forthcoming meeting of a public advisory committee of the Food...

  2. 75 FR 49940 - General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee; Notice of...

    Science.gov (United States)

    2010-08-16

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-N-0001] General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting AGENCY: Food and Drug Administration, HHS. ACTION: Notice. This notice announces a forthcoming meeting of a public advisory committee of the Food...

  3. 75 FR 36102 - General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee; Notice of...

    Science.gov (United States)

    2010-06-24

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-N-0001] General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting AGENCY: Food and Drug Administration, HHS. ACTION: Notice. This notice announces a forthcoming meeting of a public advisory committee of the Food...

  4. 75 FR 61507 - General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee; Amendment of...

    Science.gov (United States)

    2010-10-05

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-N-0001] General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee; Amendment of Notice AGENCY: Food and Drug Administration, HHS. ACTION: Notice. The Food and Drug Administration (FDA) is announcing an amendment to the notice of...

  5. 76 FR 62419 - General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee; Notice of...

    Science.gov (United States)

    2011-10-07

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2011-N-0002] General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting AGENCY: Food and Drug Administration, HHS. ACTION: Notice. This notice announces a forthcoming meeting of a public advisory committee of the Food...

  6. 76 FR 14415 - General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee; Notice of...

    Science.gov (United States)

    2011-03-16

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2011-N-0002] General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting AGENCY: Food and Drug Administration, HHS. ACTION: Notice. This notice announces a forthcoming meeting of a public advisory committee of the Food...

  7. 77 FR 20642 - General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee; Notice of...

    Science.gov (United States)

    2012-04-05

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2012-N-0001] General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting AGENCY: Food and Drug Administration, HHS. ACTION: Notice. This notice announces a forthcoming meeting of a public advisory committee of the Food...

  8. 76 FR 39882 - General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee; Notice of...

    Science.gov (United States)

    2011-07-07

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2011-N-0478] General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting AGENCY: Food and Drug Administration, HHS. ACTION: Notice. This notice announces a forthcoming meeting of a public advisory committee of the Food...

  9. 76 FR 42713 - General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee; Amendment of...

    Science.gov (United States)

    2011-07-19

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2011-N-0478] General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee; Amendment of Notice AGENCY: Food and Drug Administration, HHS. ACTION: Notice. The Food and Drug Administration (FDA) is announcing an amendment to the notice of...

  10. 75 FR 47606 - General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee; Notice of...

    Science.gov (United States)

    2010-08-06

    ...The meeting of the General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee scheduled for August 26, 2010, is postponed. The meeting was announced in the Federal Register of June 24, 2010 (75 FR 36102). The meeting is postponed so that FDA can review and consider additional information that was submitted. A future meeting date will be announced in the Federal Register at a later date.

  11. 76 FR 65200 - General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee: Notice of...

    Science.gov (United States)

    2011-10-20

    ...The Food and Drug Administration (FDA) is postponing the meeting of the General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee scheduled for December 1, 2011. The meeting was announced in the Federal Register of Friday, October 7, 2011 (76 FR 62419). The meeting is postponed so that FDA can review and consider additional information that was submitted. A future meeting date will be announced in the Federal Register.

  12. 78 FR 30928 - General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee; Notice of...

    Science.gov (United States)

    2013-05-23

    ... integral sharps injury prevention feature is for single use only, disposable blood lancet with a blade attached to a solid base which includes an integral sharps injury prevention feature that allows the device... puncture the skin to obtain a drop of blood for diagnostic purposes; Blood lancet without an integral...

  13. 75 FR 1395 - General and Plastic Surgery Devices Panel of the Medical Devices Advisory Committee; Amendment of...

    Science.gov (United States)

    2010-01-11

    ... and Radiological Health, Food and Drug Administration, 10903 New Hampshire Ave., White Oak 66, rm..., Center for Devices and Radiological Health, Food and Drug Administration, 10903 New Hampshire Ave., White... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2009-N-0606...

  14. Heart failure - surgeries and devices

    Science.gov (United States)

    CHF - surgery; Congestive heart failure - surgery; Cardiomyopathy - surgery; HF - surgery; Intra-aortic balloon pumps - heart failure; IABP - heart failure; Catheter based assist devices - heart failure

  15. 76 FR 50485 - Obstetrics and Gynecology Devices Panel of the Medical Devices Advisory Committee; Amendment of...

    Science.gov (United States)

    2011-08-15

    ...] Obstetrics and Gynecology Devices Panel of the Medical Devices Advisory Committee; Amendment of Notice AGENCY... an amendment to the notice of meeting of the Obstetrics and Gynecology Devices Panel of the Medical... Obstetrics and Gynecology Devices Panel of the Medical Devices Advisory Committee would be held on September...

  16. 78 FR 26786 - Microbiology Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2013-05-08

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2013-N-0001] Microbiology Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting AGENCY: Food and Drug...: Microbiology Devices Panel of the Medical Devices Advisory Committee. General Function of the Committee: To...

  17. Haptic device for telerobotic surgery

    Science.gov (United States)

    Salisbury, Curt; Salisbury, Jr., J. Kenneth

    2014-12-30

    A haptic device for telerobotic surgery, including a base; a linkage system having first and second linkage members coupled to the base; a motor that provides a motor force; a transmission including first and second driving pulleys arranged such that their faces form an angle and their axes form a plane, first and second idler pulleys offset from the plane and arranged between the first and second driving pulleys such that their axes divide the angle between the first and second driving pulleys, and a cable that traverses the first and second driving pulleys and the set of idler pulleys and transfers the motor force to the linkage system; an end effector coupled to distal ends of the first and second linkage members and maneuverable relative to the base; and a controller that modulates the motor force to simulate a body part at a point portion of the end effector.

  18. 76 FR 55398 - Immunology Devices Panel of the Medical Devices Advisory Committee: Notice of Postponement of...

    Science.gov (United States)

    2011-09-07

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration Immunology Devices Panel of the Medical Devices Advisory.... SUMMARY: The Food and Drug Administration (FDA) is postponing the meeting of the Immunology Devices Panel...

  19. 76 FR 48871 - Immunology Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2011-08-09

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration Immunology Devices Panel of the Medical Devices Advisory...). The meeting will be open to the public. Name of Committee: Immunology Devices Panel of the Medical...

  20. 78 FR 13347 - Clinical Chemistry and Clinical Toxicology Devices Panel of the Medical Devices Advisory...

    Science.gov (United States)

    2013-02-27

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2013-N-0001] Clinical Chemistry and Clinical Toxicology Devices Panel of the Medical Devices Advisory Committee; Notice... be open to the public. Name of Committee: Clinical Chemistry and Clinical Toxicology Devices Panel of...

  1. 21 CFR 886.4360 - Ocular surgery irrigation device.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Ocular surgery irrigation device. 886.4360 Section... (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Surgical Devices § 886.4360 Ocular surgery irrigation device. (a) Identification. An ocular surgery irrigation device is a device intended to be suspended over the...

  2. Guns and High Gas Output Devices Panel: Introduction

    Science.gov (United States)

    Simmons, Ronald L.; Kaste, Pamela J.

    2000-01-01

    A new panel known as the Guns and High Gas Output Panel was organized in 1999 under the auspices of the JANNAF Propellant and Characterization SubCommittee (PDCS). This is an introduction to our first meeting, purpose of the panel, and the scope of activities to be covered. The primary purpose of the panel is very simple: to provide a single focal point for interfacing Government Laboratories (Department of Defense and Department of Energy) and commercial industry researchers to share R&D activities and findings (i.e. facilitate the exchange of information) specifically aimed at gun-launched propulsion and high-gas output devices (gas generators and air bag inflators). Specific areas of interest included in the Panel's scope (and the Technical Data Base) are the following: (1) new propellant formulations and chemistry, (2) new ingredients, (3) ballistic effects of the new formulations and ingredients, (4) new processing methods unique to gun propellants, (5) thermochemistry of new ingredients, (6) unique physical and mechanical properties, (7) burning rates of new propellants and small scale closed bomb testing, (8) plasma effects on the propellant, and (9) unique safety and insensitive munitions properties.

  3. 76 FR 18227 - Molecular and Clinical Genetics Panel of the Medical Devices Advisory Committee; Notice of...

    Science.gov (United States)

    2011-04-01

    ...] Molecular and Clinical Genetics Panel of the Medical Devices Advisory Committee; Notice of Meeting... comment period for the notice announcing a meeting of the Molecular and Clinical Genetics Panel (the panel... Clinical Genetics Panel of the Medical Devices Advisory Committee, and the opening of a public docket to...

  4. 76 FR 14414 - Microbiology Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2011-03-16

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES [Docket No. FDA-2011-N-0002] Microbiology Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting AGENCY: Food and Drug Administration, HHS... and Drug Administration (FDA). The meeting will be open to the public. Name of Committee: Microbiology...

  5. 78 FR 19717 - Clinical Chemistry and Clinical Toxicology Devices Panel of the Medical Devices Advisory...

    Science.gov (United States)

    2013-04-02

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2013-N-0001] Clinical Chemistry and Clinical Toxicology Devices Panel of the Medical Devices Advisory Committee: Notice of Change of Meeting Schedule AGENCY: Food and Drug Administration, HHS. ACTION: Notice; correction...

  6. 76 FR 41507 - Obstetrics and Gynecology Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2011-07-14

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2011-N-0002] Obstetrics and Gynecology Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting AGENCY... public. Name of Committee: Obstetrics and Gynecology Devices Panel of the Medical Devices Advisory...

  7. Glaucoma Drainage Device Erosion Following Ptosis Surgery.

    Science.gov (United States)

    Bae, Steven S; Campbell, Robert J

    2017-09-01

    To highlight the potential risk of glaucoma drainage device erosion following ptosis surgery. Case report. A 71-year-old man underwent uncomplicated superotemporal Ahmed glaucoma valve implantation in the left eye in 2008. Approximately 8 years later, the patient underwent bilateral ptosis repair, which successfully raised the upper eyelid position. Three months postoperatively, the patient's glaucoma drainage implant tube eroded through the corneal graft tissue and overlying conjunctiva to become exposed. A graft revision surgery was successfully performed with no further complications. Caution and conservative lid elevation may be warranted when performing ptosis repair in patients with a glaucoma drainage implant, and patients with a glaucoma implant undergoing ptosis surgery should be followed closely for signs of tube erosion.

  8. Silver Nanoparticles in Alveolar Bone Surgery Devices

    Directory of Open Access Journals (Sweden)

    Stefano Sivolella

    2012-01-01

    Full Text Available Silver (Ag ions have well-known antimicrobial properties and have been applied as nanostrategies in many medical and surgical fields, including dentistry. The use of silver nanoparticles (Ag NPs may be an option for reducing bacterial adhesion to dental implant surfaces and preventing biofilm formation, containing the risk of peri-implant infections. Modifying the structure or surface of bone grafts and membranes with Ag NPs may also prevent the risk of contamination and infection that are common when alveolar bone augmentation techniques are used. On the other hand, Ag NPs have revealed some toxic effects on cells in vitro and in vivo in animal studies. In this setting, the aim of the present paper is to summarize the principle behind Ag NP-based devices and their clinical applications in alveolar bone and dental implant surgery.

  9. 78 FR 63225 - Ear, Nose and Throat Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2013-10-23

    ... HUMAN SERVICES Food and Drug Administration Ear, Nose and Throat Devices Panel of the Medical Devices... Federal Register about last minute modifications that impact a previously announced advisory committee... for the Nucleus Hybrid TM L24 Implant System sponsored by Cochlear Americas. The proposed Indications...

  10. Medical devices; immunology and microbiology devices; classification of respiratory viral panel multiplex nucleic acid assay. Final rule.

    Science.gov (United States)

    2009-10-09

    The Food and Drug Administration (FDA) is announcing the classification of the respiratory viral panel multiplex nucleic acid assay into class II (special controls). The special controls that will apply to the device are three guidance documents entitled: "Class II Special Controls Guidance Document: Respiratory Viral Panel Multiplex Nucleic Acid Assay," as applicable, "Class II Special Controls Guidance Document: Testing for Human Metapneumovirus (hMPV) Using Nucleic Acid Assays," and as applicable,"Class II Special Controls Guidance Document: Testing for Detection and Differentiation of Influenza A Virus Subtypes Using Multiplex Nucleic Acid Assays.'' The agency classified the device into class II (special controls) in order to provide a reasonable assurance of safety and effectiveness of the device. Elsewhere in this issue of the Federal Register, FDA is announcing the availability of the guidance documents that will serve as the special controls for this device.

  11. Expert panel on weight loss surgery: executive report update.

    Science.gov (United States)

    Blackburn, George L; Hutter, Matthew M; Harvey, Alan M; Apovian, Caroline M; Boulton, Hannah R W; Cummings, Susan; Fallon, John A; Greenberg, Isaac; Jiser, Michael E; Jones, Daniel B; Jones, Stephanie B; Kaplan, Lee M; Kelly, John J; Kruger, Rayford S; Lautz, David B; Lenders, Carine M; Lonigro, Robert; Luce, Helen; McNamara, Anne; Mulligan, Ann T; Paasche-Orlow, Michael K; Perna, Frank M; Pratt, Janey S A; Riley, Stancel M; Robinson, Malcolm K; Romanelli, John R; Saltzman, Edward; Schumann, Roman; Shikora, Scott A; Snow, Roger L; Sogg, Stephanie; Sullivan, Mary A; Tarnoff, Michael; Thompson, Christopher C; Wee, Christina C; Ridley, Nancy; Auerbach, John; Hu, Frank B; Kirle, Leslie; Buckley, Rita B; Annas, Catherine L

    2009-05-01

    Rapid shifts in the demographics and techniques of weight loss surgery (WLS) have led to new issues, new data, new concerns, and new challenges. In 2004, this journal published comprehensive evidence-based guidelines on WLS. In this issue, we've updated those guidelines to assure patient safety in this fast-changing field. WLS involves a uniquely vulnerable population in need of specialized resources and ongoing multidisciplinary care. Timely best-practice updates are required to identify new risks, develop strategies to address them, and optimize treatment. Findings in these reports are based on a comprehensive review of the most current literature on WLS; they directly link patient safety to methods for setting evidence-based guidelines developed from peer-reviewed scientific publications. Among other outcomes, these reports show that WLS reduces chronic disease risk factors, improves health, and confers a survival benefit on those who undergo it. The literature also shows that laparoscopy has displaced open surgery as the predominant approach; that government agencies and insurers only reimburse procedures performed at accredited WLS centers; that best practice care requires close collaboration between members of a multidisciplinary team; and that new and existing facilities require wide-ranging changes to accommodate growing numbers of severely obese patients. More than 100 specialists from across the state of Massachusetts and across the many disciplines involved in WLS came together to develop these new standards. We expect them to have far-reaching effects of the development of health care policy and the practice of WLS.

  12. 76 FR 20840 - Medical Devices; General and Plastic Surgery Devices; Classification of the Low Level Laser...

    Science.gov (United States)

    2011-04-14

    ... lipids from these cells for noninvasive aesthetic use. (b) Classification. Class II (special controls.... FDA-2011-N-0188] Medical Devices; General and Plastic Surgery Devices; Classification of the Low Level.... DATES: This rule is effective May 16, 2011. The classification was effective on August 24, 2010. FOR...

  13. 75 FR 33315 - Dental Products Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2010-06-11

    ... received by FDA concerning the final rule on the classification of dental amalgam, which published in the... adequacy of the risk assessment performed by FDA in classifying dental amalgam in light of a new report on... HUMAN SERVICES Food and Drug Administration Dental Products Panel of the Medical Devices Advisory...

  14. A 3-DOF haptic master device for minimally invasive surgery

    Science.gov (United States)

    Nguyen, Phuong-Bac; Oh, Jong-Seok; Choi, Seung-Bok

    2012-04-01

    This paper introduces a novel 3-DOF haptic master device for minimally invasive surgery featuring magneto-rheological (MR) fluid. It consists of three rotational motions. These motions are constituted by two bi-directional MR (BMR) plus one conventional MR brakes. The BMR brake used in the system possesses a salient advantage that its range of braking torque varies from negative to positive values. Therefore, the device is expected to be able sense in a wide environment from very soft tissues to bones. In this paper, overall of the design of the device is presented from idea, modeling, optimal design, manufacturing to control of the device. Moreover, experimental investigation is undertaken to validate the effectiveness of the device.

  15. 76 FR 6623 - Molecular and Clinical Genetics Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2011-02-07

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2011-N-0066] Molecular and Clinical Genetics Panel of the Medical Devices Advisory Committee; Notice of Meeting AGENCY... public. Name of Committee: Molecular and Clinical Genetics Panel of the Medical Devices Advisory...

  16. Best Practices for Outpatient Anterior Cervical Surgery: Results From a Delphi Panel.

    Science.gov (United States)

    Mohandas, Anita; Summa, Chris; Worthington, W Bradley; Lerner, Jason; Foley, Kevin T; Bohinski, Robert J; Lanford, Gregory B; Holden, Carol; Wohns, Richard N W

    2017-06-01

    Delphi Panel expert panel consensus and narrative literature review. To obtain expert consensus on best practices for patient selection and perioperative decision making for outpatient anterior cervical surgery (anterior cervical disc fusion (ACDF) and cervical total disc replacement (CTDR)). Spine surgery in ambulatory settings is becoming a preferred option for both patients and providers. The transition from traditional inpatient environments has been enabled by innovation in anesthesia protocols and surgical technique, as well as favorable economics. Studies have demonstrated that anterior cervical surgery (ACDF and CTDR) can be performed safely on an outpatient basis. However, practice guidelines and evidence-based protocols to inform best practices for the safe and efficient performance of these procedures in same-day, ambulatory settings are lacking. A panel of five neurosurgeons, three anesthesiologists, one orthopedic spine surgeon, and a registered nurse was convened to comprise a multidisciplinary expert panel. A three-round modified-Delphi method was used to generate best-practice statements. Predetermined consensus was set at 70% for each best-practice statement. A total of 94 consensus statements were reviewed by the panel. After three rounds of review, there was consensus for 83 best-practice statements, while 11 statements failed to achieve consensus. All statements within several perioperative categories (and subcategories) achieved consensus, including preoperative assessment (n = 8), home-care/follow-up (n = 2), second-stage recovery (n = 18), provider economics (n = 8), patient education (n = 14), discharge criteria (n = 4), and hypothermia prevention (n = 6). This study obtained expert-panel consensus on best practices for patient selection and perioperative decision making for outpatient anterior cervical surgery (ACDF/CTDR). Given a paucity of guidelines and a lack of established care pathways for ACDF/CTDR in same

  17. 78 FR 49272 - Circulatory System Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2013-08-13

    .... The hotel telephone number is 301-977-8900. Contact Person: Jamie Waterhouse, Center for Devices and..., pneumatically, or electrically and (2) devices that aid the emergency medical professional in delivering manual...

  18. 78 FR 77689 - Orthopaedic and Rehabilitation Devices Panel of the Medical Devices Advisory Committee; Notice of...

    Science.gov (United States)

    2013-12-24

    ... diagnosis of cystic fibrosis or for other uses if the drug intended for use with the device bears adequate... 50520) for classification of iontophoresis devices for specialized uses (for the diagnosis of cystic... cystic fibrosis or other uses if the labeling of the drug intended for use with the device bears adequate...

  19. 78 FR 25747 - Gastroenterology and Urology Devices Panel of the Medical Devices Advisory Committee; Notice of...

    Science.gov (United States)

    2013-05-02

    ... make recommendations regarding the proposed classification of implanted blood access devices for hemodialysis from class III to class II. The class III implanted blood access devices for hemodialysis include... tubing terminating in rigid Luer lock connectors for attachment to a dialysis machine. Subcutaneous...

  20. 75 FR 36660 - Orthopaedic and Rehabilitation Devices Panel of the Medical Devices Advisory Committee; Notice of...

    Science.gov (United States)

    2010-06-28

    ...., Gaithersburg, MD. Contact Person: Tracy Phillips, Food and Drug Administration, Center for Devices and... special needs. If you require special accommodations due to a disability, please contact AnnMarie Williams...

  1. 77 FR 32125 - Orthopaedic and Rehabilitation Devices Panel of the Medical Devices Advisory Committee; Amendment...

    Science.gov (United States)

    2012-05-31

    .... There are no other changes. FOR FURTHER INFORMATION CONTACT: Avena Russell, Center for Devices and..., MD 20993-0002, 301-796-3805, Avena[email protected] , or please use the FDA Advisory Committee...

  2. 76 FR 71045 - Neurological Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2011-11-16

    ... (301) 977-8900. Contact Person: Avena Russell, Center for Devices and Radiological Health, Food and Drug Administration, 10903 New Hampshire Ave., Bldg. 66, Rm. 1535, Silver Spring, MD 20993-0002, Avena...

  3. 76 FR 71983 - Gastroenterology and Urology Devices Panel of the Medical Devices Advisory Committee; Notice of...

    Science.gov (United States)

    2011-11-21

    ... 20877. The hotel's telephone number is (301) 977-8900. Contact Person: Avena Russell, Center for Devices..., Silver Spring, MD 20993-0002, Avena[email protected] , (301) 796-3805, or FDA Advisory Committee...

  4. Medical Devices; General and Plastic Surgery Devices; Classification of the Irrigating Wound Retractor Device. Final order.

    Science.gov (United States)

    2018-01-02

    The Food and Drug Administration (FDA or we) is classifying the irrigating wound retractor device into class II (special controls). The special controls that apply to the device type are identified in this order and will be part of the codified language for the irrigating wound retractor device's classification. We are taking this action because we have determined that classifying the device into class II (special controls) will provide a reasonable assurance of safety and effectiveness of the device. We believe this action will also enhance patients' access to beneficial innovative devices, in part by reducing regulatory burdens.

  5. 75 FR 9422 - Orthopaedic and Rehabilitation Devices Panel of the Medical Devices Advisory Committee; Notice of...

    Science.gov (United States)

    2010-03-02

    ... A, B, C and D, 620 Perry Pkwy., Gaithersburg, MD. Contact Person: Tracy Phillips, Center for Devices... 20993, 301-796-6150, Tracy[email protected] , or FDA Advisory Committee Information Line, 1-800-741... special needs. If you require special accommodations due to a disability, please contact AnnMarie Williams...

  6. 78 FR 24426 - Orthopaedic and Rehabilitation Devices Panel of the Medical Devices Advisory Committee; Notice of...

    Science.gov (United States)

    2013-04-25

    ... application for the Kineflex/C Cervical Artificial Disc sponsored by SpinalMotion. The Kineflex/C is a metal-on-metal (cobalt chrome molybdenum alloy) cervical total disc replacement device. The Kineflex/C is... discectomy for intractable radiculopathy or myelopathy due to a single-level abnormality localized to the...

  7. 77 FR 42503 - Ophthalmic Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2012-07-19

    ... 301-977-8900. Contact Person: Natasha Facey, Center for Devices and Radiological Health, Food and Drug... who meet the following criteria: Adults, age 25 years or older. Bare light or no light perception in... perception, the retina must be able to respond to electrical stimulation as evidenced by an electrically...

  8. 75 FR 4407 - The Neurological Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2010-01-27

    .... Contact Person: Deborah Falls, Center for Devices and Radiological Health, Food and Drug Administration... premarket approval application for the Deep Brain Stimulation System for Epilepsy sponsored by Medtronic...-onset seizures (affecting only a part of the brain when they begin), with or without secondary...

  9. Development of a new access device for transgastric surgery.

    Science.gov (United States)

    Swanstrom, Lee L; Kozarek, Richard; Pasricha, Pankaj J; Gross, Steven; Birkett, Desmond; Park, Per-Ola; Saadat, Vahid; Ewers, Richard; Swain, Paul

    2005-11-01

    Flexible endoscope-based endoluminal and transgastric surgery for cholecystectomy, appendectomy, bariatric, and antireflux procedures show promise as a less invasive form of surgery. Current endoscopes and instruments are inadequate to perform such complex surgeries for a variety of reasons: they are too flexible and are insufficient to provide robust grasping and anatomic retraction. The lack of support for a retroflexed endoscope in the peritoneal cavity makes it hard to reach remote structures and makes vigorous retraction of tissues and organs difficult. There is also a need for multiple channels in scopes to allow use of several instruments and to provide traction/countertraction. Finally, secure means of tissue approximation are critical. The aim was to develop and test a new articulating flexible endoscopic system for endoluminal and transgastric endosurgery. A multidisciplinary group of gastrointestinal physicians and surgeons worked with medical device engineers to develop new devices and instruments. Needs assessments and design parameters were developed by consensus. Prototype devices were tested using inanimate models until usable devices were arrived at. The devices were tested in nonsurvival pigs and dogs. The devices were accessed through an incision in the wall of the stomach and manipulated in the peritoneal cavity to accomplish four different tasks: right upper quadrant wedge liver biopsy, right lower quadrant cecal retraction, left lower quadrant running small bowel, and left lower quadrant exposure of esophageal hiatus. In another three pigs, transgastric cholecystectomy was attempted. The positions of the device, camera, and endosurgical instruments, with and without ShapeLock technology, were recorded using laparoscopy and endoscopy and procedure times and success rates were measured. Instrument design parameters and their engineering solutions are described. Flexible multilumen guides which could be locked in position, including a prototype

  10. Teach and Playback Training Device for Minimally Invasive Surgery

    Directory of Open Access Journals (Sweden)

    Sriram Garudeswaran

    2018-01-01

    Full Text Available Recent technological progress offers the opportunity to significantly transform conventional open surgical procedures in ways that allow minimally invasive surgery (MIS to be accomplished by specific operative instruments’ entry into the body through key-sized holes rather than large incisions. Although MIS offers an opportunity for less trauma and quicker recovery, thereby reducing length of hospital stay and attendant costs, the complex nature of this procedure makes it difficult to master, not least because of the limited work area and constricted degree of freedom. Accordingly, this research seeks to design a Teach and Playback device that can aid surgical training by key-framing and then reproducing surgical motions. The result is an inexpensive and portable Teach and Playback laparoscopic training device that can record a trainer’s surgical motions and then play them back for trainees. Indeed, such a device could provide a training platform for surgical residents generally and would also be susceptible of many other applications for other robot-assisted tasks that might require complex motion training and control.

  11. Pilot for the Australian Breast Device Registry (ABDR): a national opt-out clinical quality registry for breast device surgery.

    Science.gov (United States)

    Hopper, Ingrid; Best, Renee L; McNeil, John J; Mulvany, Catherine M; Moore, Colin C M; Elder, Elisabeth; Pase, Marie; Cooter, Rodney D; Evans, Sue M

    2017-12-28

    To establish a pilot clinical quality registry (CQR) to monitor the quality of care and device performance for breast device surgery in Australia. All patients having breast device surgery from contributing hospitals in Australia. A literature review was performed which identified quality indicators for breast device surgery. A pilot CQR was established in 2011 to capture prospective data on breast device surgery. An interim Steering Committee and Management Committee were established to provide clinical governance, and guide quality indicator selection. The registry's minimum dataset was formulated in consultation with stakeholder groups; potential quality indicators were assessed in terms of (1) importance and relevance, (2) usability, (3) feasibility to collect and (4) scientific validity. Data collection was by a two-sided paper-based form with manual data entry. Seven sites were recruited, including one public hospital, four private hospitals and two day surgeries. Patients were recruited and opt-out consent used. The pilot breast device registry provides high-quality population-based data. It provides a model for developing a national CQR for breast devices; its minimum dataset and quality indicators reflect the opinions of the broad range of stakeholders. It is easily scalable, and has formed the basis for other international surgical groups establishing similar registries. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  12. Self-irrigating piezoelectric device in orbital surgery.

    Science.gov (United States)

    De Castro, Dawn K; Fay, Aaron; Wladis, Edward J; Nguyen, John; Osaki, Tammy; Metson, Ralph; Curry, William

    2013-01-01

    Orbital osteotomy risks injury to the eyeball and orbit soft tissues. Used extensively in oral and maxillofacial surgery, piezoelectric technology offers a greater margin of safety than traditional bone cutting instruments. The authors describe the novel use of this system in a variety of orbital surgeries. This interventional case series was performed in accordance with institutional review board regulations. The medical records of all patients who had undergone orbital surgery using the piezoelectric blade at 3 institutions were reviewed. Indication for surgery, gender, age, duration of follow up, intraoperative complications, surgical result, and postoperative course was recorded. Sixteen patients underwent surgery on 18 orbits using the piezoelectric system between August 2011 and June 2012. Surgeries performed included orbital decompression (8), lateral orbitotomy (5), cranio-orbitotomy (4), and external dacryocystorhinostomy (1). Eight were female and 8 were male patients. Mean age was 55 years old (standard deviation 15 years). Mean follow up was 82 days. The osteotomy created by the blade was narrow and smooth in every case. The surgeons uniformly appreciated the precision and safety of the instrument compared with traditional electric saw blades. There were no soft tissue lacerations or intraoperative complications and reconstructions were uniformly uneventful. Postoperative healing was rapid with no unexpected inflammation, and no palpable bony defects were appreciated in the reconstructed cases. Because it does not cut soft tissue and cuts a narrow trough, the self-irrigating piezoelectric saw blade appears safer and more precise than traditional electric saw blades in and around the orbit.

  13. Glaucoma drainage device surgery after vitreoretinal surgery : incidence and risk factors

    NARCIS (Netherlands)

    de Vries, Margriet M; Müskens, Rogier P H M; Renardel de Lavalette, Victor W; Hooymans, Johanna M M; Jansonius, Nomdo M

    Purpose: The initial success of vitreoretinal surgery can be annihilated by an acceleration of preexisting glaucoma or the development of secondary glaucoma. Aim of this study was to determine the incidence of and risk factors for medically uncontrollable glaucoma after vitreoretinal surgery.

  14. 78 FR 27971 - Dental Products Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2013-05-13

    ... regulatory classification for dental devices known as Endosseous Dental Implants (Blade-form), one of the remaining preamendments Class III devices. The Class III blade-form endosseous dental implant is a device... endosseous dental implant into class II (special controls). The committee's discussion will involve making...

  15. Predictive Factors for Patients Undergoing ASD Device Occlusion Who "Crossover" to Surgery.

    Science.gov (United States)

    Mulukutla, Venkatachalam; Qureshi, Athar M; Pignatelli, Ricardo; Ing, Frank F

    2018-03-01

    The aim of this study was to define characteristics of those patients who are referred for device closure of an Atrial septal defect (ASD), but identified to "crossover" surgery. All patients who underwent surgical and device (Amplatzer or Helex occluder) closures of secundum ASDs from 2001 to 2010 were reviewed and organized into three groups: surgical closure, device closure, and "crossover" group. 369 patients underwent ASD closure (265 device, 104 surgical). 42 of the 265 patients referred for device closure "crossed over" to the surgical group at various stages of the catheterization procedure. The device group had defect size measuring 14.2 mm (mean) and an ASD index (Defect Size (mm)/BSA) of 14.0 compared to the corresponding values in the surgical group (20.1 mm, ASD index 25.9) (P ASD index) (P ASD index of 14.7 compared with the crossover group ASD index of 23.8 (P ASD index greater than 23.7 had a 90% specificity in "crossing over" to surgery. The crossover and surgical groups had statistically larger ASD defect size indexes compared with the device group. Deficient rim in the posterior/inferior rim is associated with a large ASD size index which is a predictive factor for crossing over to surgery. Catheterization did not negatively impact surgical results in the "crossover" group.

  16. 75 FR 1396 - The General Hospital and Personal Use Devices Panel of the Medical Devices Advisory Committee...

    Science.gov (United States)

    2010-01-11

    ..., Salons C, D and E, 620 Perry Pkwy., Gaithersburg, MD. Contact Person: Tracy Phillips, Center for Devices... a disability, please contact AnnMarie Williams at 301-796-5966 at least 7 days in advance of the...

  17. 75 FR 70112 - Medical Devices; General and Plastic Surgery Devices; Classification of Non-Powered Suction...

    Science.gov (United States)

    2010-11-17

    ...The Food and Drug Administration (FDA) is classifying the non- powered suction apparatus device intended for negative pressure wound therapy (NPWT) into class II (special controls). The special control that will apply to the device is the guidance document entitled ``Class II Special Controls Guidance Document: Non-Powered Suction Apparatus Device Intended for Negative Pressure Wound Therapy.'' The agency is classifying the device into class II (special controls) in order to provide a reasonable assurance of safety and effectiveness of the device. Elsewhere in this issue of the Federal Register, FDA is publishing a notice of availability for the guidance document entitled ``Class II Special Controls Guidance Document: Non-Powered Suction Apparatus Device Intended for Negative Pressure Wound Therapy.''

  18. Medical Devices; General and Plastic Surgery Devices; Classification of the Magnetic Surgical Instrument System. Final order.

    Science.gov (United States)

    2016-09-21

    The Food and Drug Administration (FDA) is classifying the Magnetic Surgical Instrument System into class II (special controls). The special controls that will apply to the device are identified in this order and will be part of the codified language for the magnetic surgical instrument system's classification. The Agency is classifying the device into class II (special controls) in order to provide a reasonable assurance of safety and effectiveness of the device.

  19. Medical Devices; General and Plastic Surgery Devices; Classification of the Surgical Smoke Precipitator. Final order.

    Science.gov (United States)

    2018-01-30

    The Food and Drug Administration (FDA or we) is classifying the surgical smoke precipitator into class II (special controls). The special controls that apply to the device type are identified in this order and will be part of the codified language for the surgical smoke precipitator's classification. We are taking this action because we have determined that classifying the device into class II (special controls) will provide a reasonable assurance of safety and effectiveness of the device. We believe this action will also enhance patients' access to beneficial innovative devices, in part by reducing regulatory burdens.

  20. Heat exchanger panel

    Science.gov (United States)

    Warburton, Robert E. (Inventor); Cuva, William J. (Inventor)

    2005-01-01

    The present invention relates to a heat exchanger panel which has broad utility in high temperature environments. The heat exchanger panel has a first panel, a second panel, and at least one fluid containment device positioned intermediate the first and second panels. At least one of the first panel and the second panel have at least one feature on an interior surface to accommodate the at least one fluid containment device. In a preferred embodiment, each of the first and second panels is formed from a high conductivity, high temperature composite material. Also, in a preferred embodiment, the first and second panels are joined together by one or more composite fasteners.

  1. Human health and ecological toxicity potentials due to heavy metal content in waste electronic devices with flat panel displays

    International Nuclear Information System (INIS)

    Lim, Seong-Rin; Schoenung, Julie M.

    2010-01-01

    Display devices such as cathode-ray tube (CRT) televisions and computer monitors are known to contain toxic substances and have consequently been banned from disposal in landfills in the State of California and elsewhere. New types of flat panel display (FPD) devices, millions of which are now purchased each year, also contain toxic substances, but have not previously been systematically studied and compared to assess the potential impact that could result from their ultimate disposal. In the current work, the focus is on the evaluation of end-of-life toxicity potential from the heavy metal content in select FPD devices with the intent to inform material selection and design-for-environment (DfE) decisions. Specifically, the metals antimony, arsenic, barium, beryllium, cadmium, chromium, cobalt, copper, lead, mercury, molybdenum, nickel, selenium, silver, vanadium, and zinc in plasma TVs, LCD (liquid crystal display) TVs, LCD computer monitors and laptop computers are considered. The human health and ecotoxicity potentials are evaluated through a life cycle assessment perspective by combining data on the respective heavy metal contents, the characterization factors in the U.S. EPA Tool for the Reduction and Assessment of Chemical and other environmental Impacts (TRACI), and a pathway and impact model. Principal contributors to the toxicity potentials are lead, arsenic, copper, and mercury. Although the heavy metal content in newer flat panel display devices creates less human health toxicity potential than that in CRTs, for ecological toxicity, the new devices are worse, especially because of the mercury in LCD TVs and the copper in plasma TVs.

  2. Human health and ecological toxicity potentials due to heavy metal content in waste electronic devices with flat panel displays.

    Science.gov (United States)

    Lim, Seong-Rin; Schoenung, Julie M

    2010-05-15

    Display devices such as cathode-ray tube (CRT) televisions and computer monitors are known to contain toxic substances and have consequently been banned from disposal in landfills in the State of California and elsewhere. New types of flat panel display (FPD) devices, millions of which are now purchased each year, also contain toxic substances, but have not previously been systematically studied and compared to assess the potential impact that could result from their ultimate disposal. In the current work, the focus is on the evaluation of end-of-life toxicity potential from the heavy metal content in select FPD devices with the intent to inform material selection and design-for-environment (DfE) decisions. Specifically, the metals antimony, arsenic, barium, beryllium, cadmium, chromium, cobalt, copper, lead, mercury, molybdenum, nickel, selenium, silver, vanadium, and zinc in plasma TVs, LCD (liquid crystal display) TVs, LCD computer monitors and laptop computers are considered. The human health and ecotoxicity potentials are evaluated through a life cycle assessment perspective by combining data on the respective heavy metal contents, the characterization factors in the U.S. EPA Tool for the Reduction and Assessment of Chemical and other environmental Impacts (TRACI), and a pathway and impact model. Principal contributors to the toxicity potentials are lead, arsenic, copper, and mercury. Although the heavy metal content in newer flat panel display devices creates less human health toxicity potential than that in CRTs, for ecological toxicity, the new devices are worse, especially because of the mercury in LCD TVs and the copper in plasma TVs. Copyright (c) 2009 Elsevier B.V. All rights reserved.

  3. Coronary air embolism in off-pump surgery caused by blower-mister device.

    Science.gov (United States)

    Korkmaz, Askin Ali; Guden, Mustafa; Korkmaz, Feride; Yuce, Murat

    2008-01-01

    Gaseous emboli caused by the blower-mister result in air locks within coronary vessels. We describe the case of a coronary air embolism caused by a blower-mister device on off-pump surgery. The tip of the device unexpectedly entered the coronary artery through arteriotomy and caused the air emboli. Air locks in the coronary circulation led to hemodynamic deterioration, and cardiopulmonary bypass was started following the emergency cannulation.

  4. The efficacy of post-operative devices following knee arthroscopic surgery: a systematic review.

    Science.gov (United States)

    Gatewood, Corey T; Tran, Andrew A; Dragoo, Jason L

    2017-02-01

    There is a wide array of device modalities available for post-operative treatment following arthroscopic knee surgery; however, it remains unclear which types and duration of modality are the most effective. This systematic review aimed to investigate the efficacy of device modalities used following arthroscopic knee surgery. A systematic search of the literature was performed on: PubMed; Scopus; MEDLINE; EMBASE; PEDro; SportDiscus; and CINAHL databases (1995-2015) for clinical trials using device modalities following arthroscopic knee surgery: cryotherapy, continuous passive motion (CPM), neuromuscular electrical stimulation (NMES), surface electromyographic (sEMG) biofeedback and shockwave therapy (ESWT). Only level 1 and 2 studies were included and the methodological quality of studies was evaluated using Physiotherapy Evidence Database (PEDro) scores. Outcome measures included: muscle strength, range of motion, swelling, blood loss, pain relief, narcotic use, knee function evaluation and scores, patient satisfaction and length of hospital stay. Twenty-five studies were included in this systematic review, nineteen of which found a significant difference in outcomes. For alleviating pain and decreasing narcotic consumption following arthroscopic knee surgery, cryocompression devices are more effective than traditional icing alone, though not more than compression alone. CPM does not affect post-operative outcomes. sEMG biofeedback and NMES improve quadriceps strength and overall knee functional outcomes following knee surgery. There is limited evidence regarding the effects of ESWT. Cryotherapy, NMES and sEMG are recommended for inclusion into rehabilitation protocols following arthroscopic knee surgery to assist with pain relief, recovery of muscle strength and knee function, which are all essential to accelerate recovery. CPM is not warranted in post-operative protocols following arthroscopic knee surgery because of its limited effectiveness in returning knee

  5. 76 FR 43119 - Medical Devices; General and Plastic Surgery Devices; Classification of the Focused Ultrasound...

    Science.gov (United States)

    2011-07-20

    ... and Mechanical Safety Performance Testing. Inflammation/Foreign Body Response..... Section 10... and it is identified as a device using focused ultrasound to produce localized, mechanical motion... for mechanical cellular membrane disruption intended for noninvasive aesthetic use. FDA has identified...

  6. The Main Topics at the Oncoplastic Breast Surgery Course and Expert Panel.

    Science.gov (United States)

    Emiroğlu, Mustafa; Kuru, Bekir; Gülçelik, Mehmet Ali; Atahan, M Kemal; Sezer, Atakan Y; Karaali, Cem; Güllüoğlu, Bahadır

    2017-01-01

    The Oncoplastic and Reconstructive Breast Surgery course was held in Izmir by the Izmir Breast Diseases Federation in collaboration with the Breast Diseases Federation of Turkey. The techniques of oncoplasty, the application details and experience in this subject were shared. In this text, the main topics and outcomes are briefly summarised. These evaluations can be considered highly valuable on both local and regional scales.

  7. Healthcare-Associated Mycobacterium chimaera Infection Subsequent to Heater-Cooler Device Exposure During Cardiac Surgery.

    Science.gov (United States)

    Ninh, Allen; Weiner, Menachem; Goldberg, Andrew

    2017-10-01

    A SERIES of reports in the United States and Europe have linked Mycobacterium chimaera infections to contaminated heater-cooler devices used during cardiac surgery. Heater-cooler devices commonly are used for cardiopulmonary bypass during cardiac surgery. M. chimaera is a slow-growing nontuberculous mycobacterium that has been shown to cause cardiac complications that can lead to fatal disease following cardiac surgery. Given that more than 250,000 cardiothoracic surgical procedures requiring cardiopulmonary bypass take place each year in the United States, the estimated number of patient exposures to M. chimaera has prompted a public health crisis. The goal of this review is to summarize the present status of the M. chimaera outbreak and provide cardiothoracic surgeons, cardiac anesthesiologists, and other clinicians with current approaches to patient management and to discuss risk mitigation. Copyright © 2017 Elsevier Inc. All rights reserved.

  8. Safety and Feasibility of Laparoscopic Abdominal Surgery in Patients With Mechanical Circulatory Assist Devices.

    Science.gov (United States)

    Ashfaq, Awais; Chapital, Alyssa B; Johnson, Daniel J; Staley, Linda L; Arabia, Francisco A; Harold, Kristi L

    2016-10-01

    Objectives Increasing number of mechanical circulatory assist devices (MCADs) are being placed in heart failure patients. Morbidity from device placement is high and the outcome of patients who require noncardiac surgery after, is unclear. As laparoscopic interventions are associated with decreased morbidity, we examined the impact of such procedures in these patients. Methods A retrospective review was conducted on 302 patients who underwent MCAD placement from 2005 to 2012. All laparoscopic abdominal surgeries were included and impact on postoperative morbidity and mortality studied. Results Ten out of 16 procedures were laparoscopic with 1 conversion to open. Seven patients had a HeartMate II, 2 had Total Artificial Hearts, and 1 had CentriMag. Four patients had devices for ischemic cardiomyopathy and 6 cases were emergent. Surgeries included 6 laparoscopic cholecystectomies, 2 exploratory laparoscopies, 1 laparoscopic colostomy takedown, and 1 laparoscopic ventral hernia repair with mesh. Median age of the patients was 63 years (range, 29-79 years). Median operative time was 123 minutes (range, 30-380 minutes). Five of 10 patients were on preoperative anticoagulation with average intraoperative blood loss of 150 mL (range, 20-700 mL). There were 3 postoperative complications; acute respiratory failure, acute kidney injury and multisystem organ failure resulting in death not related to the surgical procedure. Conclusion The need for noncardiac surgery in post-MCAD patients is increasing due to limited donors and due to more durable and longer support from newer generation assist devices. While surgery should be approached with caution in this high-risk group, laparoscopic surgery appears to be a safe and successful treatment option. © The Author(s) 2016.

  9. Recommendations for radioembolisation after liver surgery using yttrium-90 resin microspheres based on a survey of an international expert panel

    Energy Technology Data Exchange (ETDEWEB)

    Samim, Morsal [University Medical Center Utrecht, Department of Surgery, Utrecht (Netherlands); University Medical Center Utrecht, Department of Radiology and Nuclear Medicine, Utrecht (Netherlands); Veenendaal, Linde M. van; Braat, Manon N.G.J.A.; Hoven, Andor F. van den; Bosch, Maurice A.A.J. van den; Lam, Marnix G.E.H. [University Medical Center Utrecht, Department of Radiology and Nuclear Medicine, Utrecht (Netherlands); Hillegersberg, Richard van [University Medical Center Utrecht, Department of Surgery, Utrecht (Netherlands); Sangro, Bruno [Clinica Universidad de Navarra-IDISNA and CIBEREHD, Liver Unit, Pamplona (Spain); Kao, Yung Hsiang [Cabrini Hospital, Department of Nuclear Medicine, Melbourne (Australia); Liu, Dave [Vancouver General Hospital, University of British Columbia, Department of Radiology, Vancouver, British Columbia (Canada); Louie, John D.; Sze, Daniel Y. [Stanford University Medical Center, Division of Interventional Radiology, Stanford (United States); Rose, Steven C. [University of California, Department of Radiology, San Diego (United States); Brown, Daniel B. [Vanderbilt University, Medical Center North, Department of Radiology, Nashville (United States); Ahmadzadehfar, Hojjat [University Hospital Bonn, Department of Nuclear Medicine, Bonn (Germany); Kim, Edward [Icahn School of Medicine at Mount Sinai, Division of Vascular and Interventional Radiology, New York (United States)

    2017-12-15

    Guidelines on how to adjust activity in patients with a history of liver surgery who are undergoing yttrium-90 radioembolisation ({sup 90}Y-RE) are lacking. The aim was to study the variability in activity prescription in these patients, between centres with extensive experience using resin microspheres {sup 90}Y-RE, and to draw recommendations on activity prescription based on an expert consensus. The variability in activity prescription between centres was investigated by a survey of international experts in the field of {sup 90}Y-RE. Six representative post-surgical patients (i.e. comparable activity prescription, different outcome) were selected. Information on patients' disease characteristics and data needed for activity calculation was presented to the expert panel. Reported was the used method for activity prescription and whether, how and why activity reduction was found indicated. Ten experts took part in the survey. Recommendations on activity reduction were highly variable between the expert panel. The median intra-patient range was 44 Gy (range 18-55 Gy). Reductions in prescribed activity were recommended in 68% of the cases. In consensus, a maximum D{sub Target} of 50 Gy was recommended. With a current lack of guidelines, large variability in activity prescription in post-surgical patients undergoing {sup 90}Y-RE exists. In consensus, D{sub Target} ≤50 Gy is recommended. (orig.)

  10. Preoperative Panel Testing for Hereditary Cancer Syndromes Does Not Significantly Impact Time to Surgery for Newly Diagnosed Breast Cancer Patients Compared with BRCA1/2 Testing.

    Science.gov (United States)

    Murphy, Amy E; Hussain, Lala; Ho, Ching; Dunki-Jacobs, Erik; Lee, David; Tameron, Ashley; Huelsman, Karen; Rice, Courtney; Wexelman, Barbara A

    2017-10-01

    This study seeks to determine whether there is a delay in time to surgery in breast cancer patients with panel tests compared with traditional BRCA testing. This study was a retrospective review of women diagnosed with breast cancer who underwent genetic evaluation from our institution's Genetic Counselor Database from January 2013 to August 2015. Patients were excluded if they were male, clinical information was unavailable, the patient underwent neoadjuvant chemotherapy, had a diagnosis of recurrent breast cancer during time of study, or had postoperative genetics evaluation. Included in the study were 138 patients. The time from diagnosis to surgery for BRCA1/2 tested patients was 43.5 days compared with 51.0 days in the panel group (p = 0.186). Turnaround time for genetic testing decreased during the period studied and was approximately 6 days longer for panel testing than BRCA testing. It took 12.2 days for BRCA results and 18.9 days for the panel results (p testing in 2014 and 2015 was 12.4 and 10.5 days respectively, whereas panel testing was 20.5 and 18.2 days (p ≤ 0.001). Of the variables included in multivariable linear regression, only mastectomy significantly contributed to time to surgery (p testing did not delay time to surgery compared with BRCA testing alone. The use of panel testing has increased over time, and lab turnaround time has decreased. Mastectomy was the only clinical variable contributing to longer time to surgery.

  11. Elimination of Mycobacterium chimaera in a heater cooler device used during on-pump cardiothoracic surgery.

    Science.gov (United States)

    Nielsen, Conny; Winther, Conni L; Thomsen, Philip K; Andreasen, Jan J

    2017-09-01

    Since 2014, several infections with non-tuberculous mycobacteria (NTM) belonging to the species Mycobacterium ( M.) chimaera have been associated with the use of heater-cooler devices during on-pump cardiothoracic surgery both in European countries and the United States of America. Infections have been detected after surgery, with a delay of a few months and up to five years. Bacterial contamination of heater-cooler devices has also been described without any associated infections. In many centres, it has been a challenging task to eliminate NTM from the heater-cooler devices in order to reduce the risk to patients. In this case-report, we describe how we managed to achieve negative cultures for M. chimaera by changing the cleaning procedure of the Sorin Group Heater-Cooler System with three tanks.

  12. Embedded nonvolatile memory devices with various silicon nitride energy band gaps on glass used for flat panel display applications

    International Nuclear Information System (INIS)

    Son, Dang Ngoc; Van Duy, Nguyen; Jung, Sungwook; Yi, Junsin

    2010-01-01

    Nonvolatile memory (NVM) devices with a nitride–nitride–oxynitride stack structure on a rough poly-silicon (poly-Si) surface were fabricated using a low-temperature poly-Si (LTPS) thin film transistor technology on glass substrates for application of flat panel display (FPD). The plasma-assisted oxidation/nitridation method is used to form a uniform oxynitride with an ultrathin tunneling layer on a rough LTPS surface. The NVMs, using a Si-rich silicon nitride film as a charge-trapping layer, were proposed as one of the solutions for the improvement of device performance such as the program/erase speed, the memory window and the charge retention characteristics. To further improve the vertical scaling and charge retention characteristics of NVM devices, the high-κ high-density N-rich SiN x films are used as a blocking layer. The fabricated NVM devices have outstanding electrical properties, such as a low threshold voltage, a high ON/OFF current ratio, a low subthreshold swing, a low operating voltage of less than ±9 V and a large memory window of 3.7 V, which remained about 1.9 V over a period of 10 years. These characteristics are suitable for electrical switching and data storage with in FPD application

  13. 75 FR 68972 - Medical Devices; General and Plastic Surgery Devices; Classification of Tissue Adhesive With...

    Science.gov (United States)

    2010-11-10

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 878 [Docket No... Administration, HHS. ACTION: Final rule. SUMMARY: The Food and Drug Administration (FDA) is classifying the... (special controls). The special control that will apply to the device is the guidance document entitled...

  14. A portable image overlay projection device for computer-aided open liver surgery.

    Science.gov (United States)

    Gavaghan, Kate A; Peterhans, Matthias; Oliveira-Santos, Thiago; Weber, Stefan

    2011-06-01

    Image overlay projection is a form of augmented reality that allows surgeons to view underlying anatomical structures directly on the patient surface. It improves intuitiveness of computer-aided surgery by removing the need for sight diversion between the patient and a display screen and has been reported to assist in 3-D understanding of anatomical structures and the identification of target and critical structures. Challenges in the development of image overlay technologies for surgery remain in the projection setup. Calibration, patient registration, view direction, and projection obstruction remain unsolved limitations to image overlay techniques. In this paper, we propose a novel, portable, and handheld-navigated image overlay device based on miniature laser projection technology that allows images of 3-D patient-specific models to be projected directly onto the organ surface intraoperatively without the need for intrusive hardware around the surgical site. The device can be integrated into a navigation system, thereby exploiting existing patient registration and model generation solutions. The position of the device is tracked by the navigation system's position sensor and used to project geometrically correct images from any position within the workspace of the navigation system. The projector was calibrated using modified camera calibration techniques and images for projection are rendered using a virtual camera defined by the projectors extrinsic parameters. Verification of the device's projection accuracy concluded a mean projection error of 1.3 mm. Visibility testing of the projection performed on pig liver tissue found the device suitable for the display of anatomical structures on the organ surface. The feasibility of use within the surgical workflow was assessed during open liver surgery. We show that the device could be quickly and unobtrusively deployed within the sterile environment.

  15. Ultrasonic Cutting Device for Bone Surgery Based on a Cymbal Transducer

    Science.gov (United States)

    Bejarano, F.; Lucas, M.; Wallace, R.; Spadaccino, A. M.; Simpson, H.

    In this study, we introduce a new prototype ultrasonic cutting device for bone surgery based on a class V flextensional cymbal transducer, configured for use in power ultrasonics applications, which removes many of the geometrical restrictions on the cutting tip of Langevin-based transducers. The benefit of incorporating a cymbal transducer is that since the cutting blade itself does not have to be tuned, blade design can focus more closely on delivering the best interaction with bone to provide a highly accurate cut. Small variations to the geometry of the blade do not affect the final resonance frequency. Also the ultrasonic device can be miniaturised to allow the design of devices for delicate orthopaedic procedures involving minimal-access surgery. The results show how the cymbal transducer, driven by a single piezoceramic disc, can excite sufficiently high vibration displacement amplitudes at lower driving voltages. This is achieved by adapting the configuration of the cymbal to remove the problem of epoxy layer debonding, and by optimising the cymbal end-cap and geometry through finite element modelling supported with experimental vibration characterisation. Preliminary characterisations of the resulting prototype ultrasonic bone cutting device, which operates at around 25 kHz, illustrate the success of this novel device design.

  16. Overview of the 2016 U.S. Food and Drug Administration Circulatory System Devices Advisory Panel Meeting on the Absorb Bioresorbable Vascular Scaffold System.

    Science.gov (United States)

    Steinvil, Arie; Rogers, Toby; Torguson, Rebecca; Waksman, Ron

    2016-09-12

    This study aims to describe the discussions and recommendations made during the U.S. Food and Drug Administration (FDA) Circulatory System Device Panel pre-market approval application for the Absorb Bioresorbable Vascular Scaffold (BVS) System. The Absorb BVS System is a first-of-its-kind fully bioresorbable percutaneous coronary intervention technology. The absorb BVS was studied in the ABSORB III (A Clinical Evaluation of Absorb BVS, the Everolimus Eluting Bioresorbable Vascular Scaffold in the Treatment of Subjects with de Novo Native Coronary Artery Lesions) trial, the pivotal U.S. investigational device exemption trial. Observational report of the FDA Circulatory System Device Panel pre-market approval application meeting held on March 15, 2016. The U.S. FDA Circulatory System Device Panel members reviewed the ABSROB III trial outcomes and additional post hoc analyses presented by the sponsor and the FDA. The ABSORB III trial met the primary endpoint of noninferiority of Absorb BVS compared with the control, XIENCE drug-eluting stent, for target lesion failure at 1 year. Although a higher numerical trend for adverse outcomes was reported for the Absorb BVS, there were no statistical differences between Absorb BVS and XIENCE for any safety or effectiveness components for target lesion failure or for the secondary pre-specified outcomes. Panel members raised concerns with regard to the ABSORB III results and post hoc analyses focusing mainly on the noninferiority design of the trial, the apparent safety issues of the Absorb BVS in small vessels, the mismatch of visually versus intravascular imaging assessed vessel size found in ABSORB III and its implications on the adequate device labeling, the safety of Absorb BVS in specific patient and lesion subsets, and the post-approval commitments of the sponsor. Following panel discussions and the evidence presented, the panel voted for approval of the device. Copyright © 2016 American College of Cardiology Foundation

  17. Synthetic devices for reconstructive surgery of the cruciate ligaments: a systematic review.

    Science.gov (United States)

    Batty, Lachlan M; Norsworthy, Cameron J; Lash, Nicholas J; Wasiak, Jason; Richmond, Anneka K; Feller, Julian A

    2015-05-01

    The role of synthetic devices in the management of the cruciate ligament-injured knee remains controversial. The aim of this systematic review was to assess the safety and efficacy of synthetic devices in cruciate ligament surgery. A systematic review of the electronic databases Medline, Embase, and The Cochrane Library (issue 1, 2014) on January 13, 2014, was performed to identify controlled and uncontrolled trials. Trials that assessed the safety and efficacy of synthetic devices for cruciate ligament surgery were included. The main variables assessed included rates of failure, revision, and noninfective effusion and synovitis. Patient-reported outcome assessments and complications were also assessed where reported. From 511 records screened, we included 85 articles published between 1985 and 2013 reporting on 6 synthetic devices (ligament augmentation and reconstruction system [Ligament Augmentation and Reconstruction System (LARS; Surgical Implants and Devices, Arc-sur-Tille, France)]; Leeds-Keio [Xiros (formerly Neoligaments), Leeds, England]; Kennedy ligament augmentation device [3M, St Paul, MN]; Dacron [Stryker, Kalamazoo, MI]; Gore-Tex [W.L. Gore and Associates, Flagstaff, AZ]; and Trevira [Telos (limited liability company), Marburg, Germany]). The heterogeneity of the included studies precluded meta-analysis. The results were analyzed by device and then type of reconstruction (anterior cruciate ligament [ACL]/posterior cruciate ligament [PCL]/combined ACL and PCL). The lowest cumulative rates of failure were seen with the LARS device (2.6% for ACL and 1% for PCL surgery). The highest failure rate was seen in the Dacron ACL group (cumulative rate, 33.6%). Rates of noninfective synovitis and effusion ranged from 0.2% in the LARS ACL group to 27.6% in the Gore-Tex ACL group. Revision rates ranged from 2.6% (LARS) to 11.8% (Trevira-Hochfest; Telos). Recent designs, specifically the LARS, showed good improvement in the outcome scores. The mean preoperative and

  18. [Surgery guided by customized devices: reconstruction with a free fibula flap].

    Science.gov (United States)

    Schouman, T; Bertolus, C; Chaine, C; Ceccaldi, J; Goudot, P

    2014-02-01

    The reconstruction of jaws with a free fibula flap can be anticipated virtually. The simulation can be transferred to the operating theater using customized devices obtained from computer-assisted design and manufacturing in a complete digital workflow. Several alternatives are available, from cutting guides to customized titanium osteosynthesis plates, to obtain the best accuracy and reproducibility of reconstruction. Moreover, these new processes allow integrating prosthetic planning concomitantly with reconstruction. We present the virtual three-dimensional planning method for jaw reconstruction with a free fibula flap and the various alternatives of surgery guided by customized devices provided by this planning. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

  19. Surgery or implantable hearing devices in children with congenital aural atresia: 25 years of our experience.

    Science.gov (United States)

    Jovankovičová, Andrea; Staník, Roman; Kunzo, Samuel; Majáková, Lucia; Profant, Milan

    2015-07-01

    Congenital aural atresia and ear deformities have been the subject of serious discussions for centuries. These malformations are associated with significant aesthetic and functional problems. Outcome of the surgical solution is rarely optimal. Despite the gradual improvement of surgical techniques the surgery still remains associated with very limited short-term and mainly long-term functional outcome. Therefore, the priority treatment in modern otology becomes implantable devices--BAHA, Bonebridge and active middle ear implants. The functional and aesthetic outcomes of aural atresia reconstruction performed at Pediatric ENT Department of Children's University Hospital were retrospectively evaluated and compared with the results prospectively obtained from implantable hearing devices (BAHA, Vibrant Soundbridge, Bonebridge), which have been implanted in patients with aural atresia at Department of ORL HNS, University Hospital Bratislava. Aural atresia reconstruction has been performed in 34 patients during last 25 years. Results of the surgery could be viewed as excellent only in three patients (gain above 30 dB). Air conduction threshold has decreased after the surgery in seven patients, and in two cases total deafness occurred after the surgery. Patients gain on average 12 dB in auditory threshold after surgery. Hearing devices were implanted to the group of 11 children in order to improve their hearing. All of them were the patients with bilateral aural atresia. After implantation a significant improvement in hearing threshold occurred in all children (30-35 dB on average). Together with results of air conduction threshold in patient with aural atresia before and after surgery and implantation we also present a standard deviation. The functional outcome of implantable hearing devices in patients with bilateral aural atresia clearly dominates over the traditional reconstructive surgery. Aesthetic results in pinna deformity management remain a major concern for

  20. [Impact of an automated dispensing system for medical devices in cardiac surgery department].

    Science.gov (United States)

    Clou, E; Dompnier, M; Kably, B; Leplay, C; Poupon, E; Archer, V; Paul, M

    2018-01-01

    To secure medical devices' management, the implementation of automated dispensing system in surgical service has been realized. The objective of this study was to evaluate security, organizational and economic impact of installing automated dispensing system for medical devices (ASDM). The implementation took place in a cardiac surgery department. Security impact was assessed by comparing traceability rate of implantable medical devices one year before and one year after installation. Questionnaire on nurses' perception and satisfaction completed this survey. Resupplying costs, stocks' evolution and investments for the implementation of ASDM were the subject of cost-benefit study. After one year, traceability rate is excellent (100%). Nursing staffs were satisfied with 87.5% by this new system. The introduction of ASDM allowed a qualitative and quantitative decrease in stocks, with a reduction of 30% for purchased medical devices and 15% for implantable medical devices in deposit-consignment. Cost-benefit analysis shows a rapid return on investment. Real stock decrease (purchased medical devices) is equivalent to 46.6% of investment. Implementation of ASDM allows to secure storage and dispensing of medical devices. This system has also an important economic impact and appreciated by users. Copyright © 2017 Académie Nationale de Pharmacie. Published by Elsevier Masson SAS. All rights reserved.

  1. Practice-based PREP Panel handling evaluation of a new impression mixing device and the associated material.

    Science.gov (United States)

    Burke, F J Trevor; Crisp, Russell J; Klettke, Thomas

    2011-12-01

    To evaluate the handling of a new impression mixing device and the associated impression material by general dental practitioner members of the PREP Panel. By means of a questionnaire, the participating practitioners recorded their views on the mixing machine and impression materials, having used these for ten weeks. UK general dental practices. General dental practitioner members of a UK practice-based research group. A questionnaire was designed to elicit views on the performance of the mixing device and impression material under test. This was distributed to the practitioners who had used the test materials for 10 weeks and the data thereby obtained collated and presented, principally in the form of VAS scales. Rating of various parameters of the mixing device and impression materials on VAS scales. The Pentamix 3 machine scored well for ease of initial use [4.8 on a visual analogue scale (VAS) where 1 = very difficult to use and 5 = very easy to use]. In a range of criteria (including cleanliness, easy handling, time to fill the tray and overall convenience) the Pentamix scored highly on VAS scales. A maximum score of 5 (on a VAS where 1 = very dissatisfied and 5 = very satisfied) was achieved for reproducible mixing quality. The appreciation of the Pentamix 3 mixing machine was demonstrated by the fact that 85% (n = 11) of evaluators stated that they would recommend it to colleagues. Regarding the impression material under evaluation, 85% (n = 11) of the evaluators stated that they would recommend Impregum Quick impression materials to their colleagues. Within the limitations of this study, the Pentamix 3 automatic impression mixing device scored highly in this assessment, together with the impression materials assessed. © 2011 FDI World Dental Federation.

  2. Cone-beam CT with a flat-panel detector: From image science to image-guided surgery

    Science.gov (United States)

    Siewerdsen, Jeffrey H.

    2011-08-01

    The development of large-area flat-panel X-ray detectors (FPDs) has spurred investigation in a spectrum of advanced medical imaging applications, including tomosynthesis and cone-beam CT (CBCT). Recent research has extended image quality metrics and theoretical models to such applications, providing a quantitative foundation for the assessment of imaging performance as well as a general framework for the design, optimization, and translation of such technologies to new applications. For example, cascaded systems models of the Fourier domain metrics, such as noise-equivalent quanta (NEQ), have been extended to these modalities to describe the propagation of signal and noise through the image acquisition and reconstruction chain and to quantify the factors that govern spatial resolution, image noise, and detectability. Moreover, such models have demonstrated basic agreement with human observer performance for a broad range of imaging conditions and imaging tasks. These developments in image science have formed a foundation for the knowledgeable development and translation of CBCT to new applications in image-guided interventions—for example, CBCT implemented on a mobile surgical C-arm for intraoperative 3D imaging. The ability to acquire high-quality 3D images on demand during surgical intervention overcomes conventional limitations of surgical guidance in the context of preoperative images alone. A prototype mobile C-arm developed in academic-industry partnership demonstrates CBCT with low radiation dose, sub-mm spatial resolution, and soft-tissue visibility potentially approaching that of diagnostic CT. Integration of the 3D imaging system with real-time tracking, deformable registration, endoscopic video, and 3D visualization offers a promising addition to the surgical arsenal in interventions ranging from head-and-neck/skull base surgery to spine, orthopaedic, thoracic, and abdominal surgeries. Cadaver studies show the potential for significant boosts in

  3. Glaucoma drainage device surgery in children and adults: a comparative study of outcomes and complications.

    Science.gov (United States)

    Mandalos, Achilleas; Sung, Velota

    2017-05-01

    To compare the postoperative outcomes and complications of glaucoma drainage device (GDD) surgery in pediatric (adult patients. Retrospective, comparative study including all patients who underwent Baervedlt or Molteno device surgery by the same surgeon. Success criteria included postoperative intraocular pressure (IOP) between 6 and 21 mmHg and a 20% reduction from baseline. Fifty-two children (69 eyes) and 130 adults (145 eyes) were included. Mean IOP and number of medications were significantly reduced postoperatively in both groups. Overall failure rate was similar in children and adults. However, GDD failed earlier in adults than in children. Hypotony was the most common complication in both groups in the first 6 months postoperatively. Later on, bleb encapsulation was more frequent in children, while corneal decompensation tended to be more frequent and occurred earlier in adults. Children also had a higher rate of infectious endophthalmitis and required tube repositioning more frequently than adults. GDD surgery presents different postoperative challenges in children and adults, and the surgeon should remain vigilant for complications throughout the postoperative period, especially for signs of endophthalmitis or bleb encapsulation in pediatric patients. On the other hand, adults may be more prone to early corneal decompensation.

  4. [Nursing Care of Lumbar Spine Fusion Surgery Using a Semi-Rigid Device (ISOBAR)].

    Science.gov (United States)

    Wu, Meng-Shan; Su, Shu-Fen

    2016-04-01

    Aging frequently induces degenerative changes in the spine. Patients who suffer from lumbar degenerative disease tend to have lower back pain, neurological claudication, and neuropathy. Furthermore, incontinence may be an increasing issue as symptoms become severe. Lumbar spine fusion surgery is necessary if clinical symptoms continue to worsen or if the patient fails to respond to medication, physical therapy, or alternative treatments. However, this surgical procedure frequently induces adjacent segment disease (ASD), which is evidenced by the appearance of pathological changes in the upper and lower sections of the spinal surgical sites. In 1997, ISOBAR TTL dynamic rod stabilization was developed for application in spinal fusion surgery to prevent ASD-related complications. The device has proven effective in reducing pain in the lower back and legs, decreasing functional disability, improving quality of life, and retarding disc degeneration. However, the effectiveness of this intervention in decreasing the incidence of ASD requires further research investigation, and relevant literature and research in Taiwan is still lacking. This article discusses lumbar degenerative disease, its indications, the contraindications of lumbar spine fusion surgery using ISOBAR, and related postoperative nursing care. We hope this article provides proper and new knowledge to clinical nurses for the care of patients undergoing lumbar spine fusion surgery with ISOBAR.

  5. Effects of endoscopic sinus surgery and delivery device on cadaver sinus irrigation.

    Science.gov (United States)

    Harvey, Richard J; Goddard, John C; Wise, Sarah K; Schlosser, Rodney J

    2008-07-01

    Assess paranasal sinus distribution of topical solutions following endoscopic sinus surgery (ESS) using various delivery devices. Experimental prospective study. Ten cadaver sinus systems were irrigated with Gastroview before surgery, after ESS, and after medial maxillectomy. Delivery was via pressurized spray (NasaMist), neti pot (NasaFlo), and squeeze bottle (Sinus Rinse). Scans were performed before and after each delivery with a portable CT machine (Xoran xCAT), and blinded assessments were made for distribution to individual sinuses. Total sinus distribution was greater post-ESS (P squeeze bottle > pressurized spray (P spray solutions in un-operated sinuses provide little more than nasal cavity distribution. Use of squeeze bottle/neti pot post-ESS offers a greatly enhanced ability to deliver solutions to the paranasal sinuses.

  6. Low-power-consumption flat-panel light-emitting device driven by field-emission electron source using high-crystallinity single-walled carbon nanotubes

    Science.gov (United States)

    Shimoi, Norihiro; Abe, Daisuke; Matsumoto, Kazuyuki; Sato, Yoshinori; Tohji, Kazuyuki

    2017-06-01

    Thin electrode films assembled through a wet process using single-walled carbon nanotubes (SWCNTs) are expected to play a role in reducing power consumption and saving energy in field-emission electron sources. The flat-panel light-emitting device for this study featured a line-sequential-scanning-type electrode structure equipped with electrodes for on-and-off controls of electron emissions, on which high-crystallinity SWCNTs were uniformly distributed. The device successfully emitted electrons on the flat panel in a stable manner. A technology for amplifying the luminance output by controlling the persistence characteristics of a fluorescent screen was also successfully developed. By combining such elemental technologies, a flat-panel light-emission device, as a stand-alone planar lighting device, which achieves a high-luminance efficiency of 87 lm/W and energy-conserved driving, was assembled for the first time in the world. The creation of field-emission electron sources driven with ultralow power consumption, along with applications that utilize such devices, is expected in the future.

  7. Clinical Evaluation of Measuring the ACT during Elective Cardiac Surgery with Two Different Devices.

    Science.gov (United States)

    Falter, Florian; Razzaq, Nabeel; John, Martin; Fassl, Jens; Maurer, Markus; Ewing, Sean; Hofmeyr, Ross

    2018-03-01

    Unfractionated heparin is the mainstay of anticoagulation during cardiac surgery on cardiopulmonary bypass (CPB) due to its low cost, quick onset, and ease of reversal. Since over 30 years, the activated clotting time (ACT) has been used to assess the level of heparin activity both before and after CPB. We compared two different methods of measuring the ACT: i-STAT, which uses amperometric detection of thrombin cleavage, and Hemochron Jr, which is based on detecting viscoelastic changes in blood. We included 402 patients from three institutions (Papworth Hospital, Cambridge, UK; Groote Schuur, Cape Town, South Africa; University Hospital Basel, Basel, Switzerland) undergoing elective cardiac surgery on CPB in our study. We analyzed duplicate samples on both devices at all standard measuring points during the procedure. The correlation coefficient between two Hemochron and two i-STAT devices was .9165 and .9857, respectively. The within-subject coefficient of variation (WSCV) ranged from 8.2 to 13.6% for the Hemochron and from 4.1 to 9.1% for the i-STAT. We found that the number of occasions where one of the duplicate readings was >1,000 seconds while the other was below or close to the clinically significant threshold of 400 seconds were higher for the Hemochron. We found the i-STAT to systematically return higher measurements. We conclude that the i-STAT provides a more reliable test for heparin activity and assesses safe anticoagulation during cardiac surgery on pump. The fact the that the i-STAT reads higher than the Hemochron leads to the recommendation to validate the methods against each other before changing devices.

  8. Another use of the mobile device: warm-up for laparoscopic surgery.

    Science.gov (United States)

    Plerhoples, Timothy A; Zak, Yulia; Hernandez-Boussard, Tina; Lau, James

    2011-10-01

    An important facet of laparoscopic surgery is its psychomotor component. As this aspect of surgery gains attention, lessons from other psychomotor-intense fields such as athletics have led to an investigation of the benefits of "warming up" prior to entering the operating room. Practical implementation of established methods of warm-up is hampered by a reliance on special equipment and instrumentations that are not readily available. In light of emerging evidence of translatability between video-game play and operative performance, we sought to find if laparoscopic task performance improved after warming up on a mobile device balance game. Laparoscopic novices were randomized into either the intervention group (n = 20) or the control group (n = 20). The intervention group played a mobile device balance game for 10 min while the control group did no warm-up whatsoever. Assessment was performed using two tasks on the ProMIS laparoscopic simulation system: "object positioning" (where small beads are transferred between four cups) and "tissue manipulation" (where pieces of plastic are stretched over pegs). Metrics measured were time to task completion, path length, smoothness, hand dominance, and errors. The intervention group made fewer errors: object positioning task 0.20 versus 0.70, P = 0.01, tissue manipulation task 0.15 versus 0.55, P = 0.05, total errors 0.35 versus 1.25, P = 0.002. The two groups performed similarly on the other metrics. Warm-up using a mobile device balance game decreases errors on basic tasks performed on a laparoscopic surgery simulator, suggesting a practical way to warm-up prior to cases in the operating room. Copyright © 2011 Elsevier Inc. All rights reserved.

  9. Ultrasound-based tracking strategy for endoluminal devices in cardiovascular surgery.

    Science.gov (United States)

    Mura, Marco; Ciuti, Gastone; Ferrari, Vincenzo; Dario, Paolo; Menciassi, Arianna

    2014-08-22

    Magnetic endovascular navigation of wireless or soft-tethered endoluminal devices was recently proposed in the literature. This approach allows for innovative therapeutic procedures, but developing a real-time tracking strategy, compatible with magnetic dragging, is a challenging problem and is not yet solved. Two-dimensional (2D) imaging ultrasound (US)-based tracking algorithms applied to a platform for cardiovascular treatment, i.e. the MicroVAST platform, were implemented and tested for deriving the optimal strategy for tracking endovascular devices dragged by magnetic locomotion. The algorithm, based on the combination of Shi-Tomasi features detector, Lucas-Kanade features tracking and watershed segmentation technique, was demonstrated to be the most reliable and accurate solution for the implementation of the tracking strategy of soft-tethered endoluminal devices. Our results encourage the development of US-based tracking algorithms for endoluminal devices in cardiovascular surgery, paving the way to a robust three-dimensional (3D) imaging US-based tracking strategy implementation. Copyright © 2014 John Wiley & Sons, Ltd. Copyright © 2014 John Wiley & Sons, Ltd.

  10. [Incidence of urinary tract infections after cardiac surgery: comparative study accordind to catheterization device].

    Science.gov (United States)

    Hidalgo Fabrellas, I; Rebollo Pavón, M; Planas Canals, M; Barbero Cabezas, M

    2015-01-01

    Urinary tract infections (UTI) associated with urethral catheterization are the second cause of nosocomial infections in Intensive care units. We confirm a UTI when we get a result of 100,000 CFU/ml with at least one microorganism in a urine culture. Compare and determine the incidence of UTI in cardiac surgery postpoperative patients according to the catheterization device. A prospective, randomized analytical observational study of patients in the immediate cardiac surgery postoperative period. One group was probed with catheter Foley and one was inserted the catheter BIPFoley-Bactiguard® (CBF). The CBF is coated with noble metals (silver, gold and palladium) and biocompatible antimicrobial properties, covering the entire surface of the device and prevents the formation of biofilm, microbial adherence and colonization. 116 cases, 59.5% (69 cases) were negative for UTI and 40.5% (47 cases) were positive. Out of the positive UTI results, 25% were carriers of catheter Foley and 15.5% of CBF. Most common etiologic microorganisms: Escherichia coli 29.8% Klebsiella pneumonia 29.8%, Klebsiella oxytoca 9%. With the data we have observed that patients catheterized BIPfoley-Bactiguard® are infected to a lesser extent than Foley carriers. Copyright © 2013 Elsevier España, S.L.U. y SEEIUC. All rights reserved.

  11. Endoscopic cyclophotocoagulation versus second glaucoma drainage device after prior aqueous tube shunt surgery.

    Science.gov (United States)

    Murakami, Yohko; Akil, Handan; Chahal, Jasdeep; Dustin, Laurie; Tan, James; Chopra, Vikas; Francis, Brian

    2017-04-01

    To evaluate the efficacy in controlling intraocular pressure (IOP) with endoscopic cyclophotocoagulation (ECP) versus implantation of a second glaucoma drainage device (GDD-2) in the treatment of uncontrolled glaucoma with a prior aqueous tube shunt. A nonrandomized retrospective chart review. Patients with refractory glaucoma following a failed initial tube shunt (Baerveldt Glaucoma Implant 350), who underwent ECP or GDD-2 with Baerveldt Glaucoma Implant as a second surgery. Twenty-five eyes underwent ECP, and 48 eyes received a GDD-2. ECP or second tube-shunt surgery. Reduction in IOP and antiglaucoma medications, and Kaplan-Meier survival with success defined as lOP ≥ 5 mmHg and ≤ 21 mmHg and ≥ 20% reduction from preoperative IOP. Secondary outcome measures were visual acuity and the presence of any postoperative complications. Both ECP and GDD-2 significantly lowered IOP (Student's t test) and number of antiglaucoma medications (Wilcoxon paired signed rank test). There were no significant differences in postoperative IOP (Student's t test) or antiglaucoma medications (Mann Whitney test) between ECP and GDD-2 at 6 and 12 months. There was also no difference in the Kaplan-Meier survival outcomes between the two groups. Both ECP and GDD-2 are both effective as second surgeries for refractory glaucoma that has failed a prior aqueous shunt. © 2016 Royal Australian and New Zealand College of Ophthalmologists.

  12. Ethics, economics and the regulation and adoption of new medical devices: case studies in pelvic floor surgery.

    Science.gov (United States)

    Ross, Sue; Weijer, Charles; Gafni, Amiram; Ducey, Ariel; Thompson, Carmen; Lafreniere, Rene

    2010-08-26

    Concern has been growing in the academic literature and popular media about the licensing, introduction and adoption of surgical devices before full effectiveness and safety evidence is available to inform clinical practice. Our research will seek empirical survey evidence about the roles, responsibilities, and information and policy needs of the key stakeholders in the introduction into clinical practice of new surgical devices for pelvic floor surgery, in terms of the underlying ethical principals involved in the economic decision-making process, using the example of pelvic floor procedures. Our study involves three linked case studies using, as examples, selected pelvic floor surgery devices representing Health Canada device safety risk classes: low, medium and high risk. Data collection will focus on stakeholder roles and responsibilities, information and policy needs, and perceptions of those of other key stakeholders, in seeking and using evidence about new surgical devices when licensing and adopting them into practice. For each class of device, interviews will be used to seek the opinions of stakeholders. The following stakeholders and ethical and economic principles provide the theoretical framework for the study: Stakeholders--federal regulatory body, device manufacturers, clinicians, patients, health care institutions, provincial health departments, and professional societies. Clinical settings in two centres (in different provinces) will be included. Ethics--beneficence, non-maleficence, autonomy, justice. Economics--scarcity of resources, choices, opportunity costs.For each class of device, responses will be analysed to compare and contrast between stakeholders. Applied ethics and economic theory, analysis and critical interpretation will be used to further illuminate the case study material. The significance of our research in this new area of ethics will lie in providing recommendations for regulatory bodies, device manufacturers, clinicians, health

  13. Complications in cosmetic laser surgery: a review of 494 Food and Drug Administration Manufacturer and User Facility Device Experience Reports.

    Science.gov (United States)

    Zelickson, Zachary; Schram, Sarah; Zelickson, Brian

    2014-04-01

    Complications in cosmetic laser and energy based surgery affect a number of patients every year and may cause scars, burns, blisters, and pigmentation damage. To evaluate documented complications in cosmetic laser- and energy-based surgeries, determine the most common errors, and recommend a simple procedural sequence to reduce patient complications. U.S. Food and Drug Administration Manufacturer and User Facility Device Experience Adverse Event Reports after cosmetic laser- and energy-based procedures with varied devices were reviewed (N = 494). The laser manufacturer, device used, event type, injury type, cause, operator, and indication for treatment for each case were identified. In the 494 cases reviewed between 2006 and 2011, the most common complications were burns, scarring, blistering, pigmentation damage, and infection. The most common cause of these complications was user error by a healthcare provider (30%), followed by laser device malfunction (20%) and patient error (4%). Indications for treatment were unknown for 69% of cases, and 38% of the cases were an unknown cause of complication. User error was a major factor in laser surgery complications. To improve safety and reduce errors, we propose the implementation of a procedural sequence for cosmetic laser surgery. © 2014 by the American Society for Dermatologic Surgery, Inc. Published by Wiley Periodicals, Inc.

  14. Corneal decompensation following filtering surgery with the Ex-PRESS® mini glaucoma shunt device

    Directory of Open Access Journals (Sweden)

    Tojo N

    2015-03-01

    Full Text Available Naoki Tojo, Atsushi Hayashi, Akio Miyakoshi Department of Ophthalmology, Graduate School of Medicine and Pharmaceutical Sciences, University of Toyama, Toyama, Japan Purpose: To report a case of corneal decompensation due to the Ex-PRESS® mini glaucoma shunt device (Ex-PRESS.Patient and methods: A 75-year-old man had pseudoexfoliation glaucoma in his right eye. He underwent filtration surgery with Ex-PRESS. His intraocular pressure was 7 mmHg after 9 months.Results: We observed partial decompensation of the corneal endothelium adjacent to the filtering bleb. Specular microscopy revealed a marked decrease in the endothelial cell density at the center of the cornea.Conclusion: Anterior segment optical coherence tomography is very useful for evaluating corneal edema and the position of Ex-PRESS. It is important to follow up with an examination of the corneal endothelial cells. Keywords: Ex-PRESS, bullous keratopathy, trabeculectomy, complication, cornea 

  15. Bone-anchored hearing device surgery: Linear incision without soft tissue reduction. A prospective study.

    Science.gov (United States)

    Altuna, Xabier; Navarro, Juan José; Palicio, Idoia; Álvarez, Leire

    2015-01-01

    The classic surgical procedure for percutaneous bone-anchored hearing devices involves removal of a large area of subcutaneous tissue down to the periosteum. This leads to alopecia and raises the risk of devascularization of the overlying skin with the potential for infection and scarring. The objective of this study was to determine the results of implant placement using a single, linear incision with no underlying soft tissue reduction. A prospective study was conducted in our hospital over a period of 14 months in all consecutive surgeries performed using this technique in adults. Patients were reviewed regularly (week 1, week 3, weeks 4-6 and months 3, 6 and 12) to assess wound healing including evaluation with the Holgers scale. Corresponding to 34 patients, 34 cases were consecutively enrolled in this study. We found that 15% of the patients had minor skin reactions during the first visit (Holgers grade 1 or 2); this number raised to 20% in week 3, but at week 4 only 1 patient had a reaction score of 1 (which was solved by week 6). None of the cases required revision surgery and all skin reactions were treated topically. Our results suggest that the tissue preservation technique is a simple and effective insertion technique with a favourable healing process and cosmesis. Copyright © 2014 Elsevier España, S.L.U. and Sociedad Española de Otorrinolaringología y Patología Cérvico-Facial. All rights reserved.

  16. Application of a multi-gene next-generation sequencing panel to a non-invasive oesophageal cell-sampling device to diagnose dysplastic Barrett's oesophagus.

    Science.gov (United States)

    Katz-Summercorn, Annalise; Anand, Shubha; Ingledew, Sophie; Huang, Yuanxue; Roberts, Thomas; Galeano-Dalmau, Nuria; O'Donovan, Maria; Liu, Hongxiang; Fitzgerald, Rebecca C

    2017-10-01

    The early detection and endoscopic treatment of patients with the dysplastic stage of Barrett's oesophagus is a key to preventing progression to oesophageal adenocarcinoma. However, endoscopic surveillance protocols are hampered by the invasiveness of repeat endoscopy, sampling bias, and a subjective histopathological diagnosis of dysplasia. In this case-control study, we investigated the use of a non-invasive, pan-oesophageal cell-sampling device, the Cytosponge™, coupled with a cancer hot-spot panel to identify patients with dysplastic Barrett's oesophagus. Formalin-fixed, paraffin-embedded (FFPE) Cytosponge™ samples from 31 patients with non-dysplastic and 28 with dysplastic Barrett's oesophagus with good available clinical annotation were selected for inclusion. Samples were microdissected and amplicon sequencing performed using a panel covering > 2800 COSMIC hot-spot mutations in 50 oncogenes and tumour suppressor genes . S trict mutation criteria were determined and duplicates were run to confirm any mutations with an allele frequency panel achieved a 71.4% sensitivity (95% CI 51.3-86.8) and 90.3% (95% CI 74.3-98.0) specificity for diagnosing dysplasia. TP53 had the highest rate of mutation in 14/28 dysplastic samples (50%). CDKN2A was mutated in 6/28 (21.4%), ERBB2 in 3/28 (10.7%), and 5 other genes at lower frequency. The only gene from this panel found to be mutated in the non-dysplastic cases was CDKN2A in 3/31 cases (9.7%) in keeping with its known loss early in the natural history of the disease. Hence, it is possible to apply a multi-gene cancer hot-spot panel and next-generation sequencing to microdissected, FFPE samples collected by the Cytosponge™, in order to distinguish non-dysplastic from dysplastic Barrett's oesophagus. Further work is required to maximize the panel sensitivity.

  17. Heater-cooler units: contamination of crucial devices in cardiothoracic surgery.

    Science.gov (United States)

    Götting, T; Klassen, S; Jonas, D; Benk, Ch; Serr, A; Wagner, D; Ebner, W

    2016-07-01

    Several cases of Mycobacterium chimaera infection have recently been reported in cardiosurgical patients. So-called heater-cooler units (HCUs) used in cardiosurgical procedures are suspected to be the reservoir for pathogen growth and dissemination. To assess the contamination status of HCUs at our facility. Air sampling for mycobacteria was conducted at different distances from the machines and in the area around the operating table. Air sampling was also conducted for non-fermenters as a surrogate parameter for water-associated pathogens. Mycobacterium chimaera was detected in the water tanks of the HCUs. When the devices were operating, M. chimaera was also found in their exhaust air, as well as in the area around the operating table. Non-fermenters were identified at different distances from the running HCU and the area around the operating table. Cultures remained negative when the devices were switched off. Exhaust air from HCUs may be a pathway of pathogen transmission to patients undergoing open chest heart surgery. Although, for technical reasons, relocation of HCUs is difficult to achieve, only strict separation of the HCU from the operating room appears to enhance patient safety. Using non-fermenters as a surrogate parameter may be considered a viable option for a timely risk assessment. The design of HCUs should be modified to keep susceptibility to contamination at a minimum. Copyright © 2016 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

  18. Extending the reach of stapled anastomosis with a prepared OrVil™ device in laparoscopic oesophageal and gastric cancer surgery.

    LENUS (Irish Health Repository)

    Salih, Abdelmonim E A

    2014-08-27

    The introduction of minimally invasive surgery and the use of laparoscopic techniques have significantly improved patient outcomes and have offered a new range of options for the restoration of intestinal continuity. Various reconstruction techniques have been described and various devices employed but none has been established as superior. This study evaluates our experience with, and modifications of, the orally inserted anvil (OrVil™).

  19. Global Health Estimate of Invasive Mycobacterium chimaera Infections Associated with Heater-Cooler Devices in Cardiac Surgery.

    Science.gov (United States)

    Sommerstein, Rami; Hasse, Barbara; Marschall, Jonas; Sax, Hugo; Genoni, Michele; Schlegel, Matthias; Widmer, Andreas F

    2018-03-01

    Investigations of a worldwide epidemic of invasive Mycobacterium chimaera associated with heater-cooler devices in cardiac surgery have been hampered by low clinical awareness and challenging diagnoses. Using data from Switzerland, we estimated the burden of invasive M. chimaera to be 156-282 cases/year in 10 major cardiac valve replacement market countries.

  20. Effects of Cell-Saving Devices and Filters on Transfusion in Cardiac Surgery : A Multicenter Randomized Study

    NARCIS (Netherlands)

    Vermeijden, Wytze J.; van Klarenbosch, Jan; Gu, Y. John; Mariani, Massimo A.; Buhre, Wolfgang F.; Scheeren, Thomas W. L.; Hagenaars, Johanna A. M.; Tan, M. Erwin S. H.; Haenen, Jo S. E.; Bras, Leo; van Oeveren, Wim; van den Heuvel, Edwin R.; de Vries, Adrianus J.

    Background: Cell-saving devices (CS) are frequently used in cardiac surgery to reduce transfusion requirements, but convincing evidence from randomized clinical trials is missing. Filtration of salvaged blood in combination with the CS is widely used to improve the quality of retransfused blood, but

  1. Effects of cell-saving devices and filters on transfusion in cardiac surgery : a multicenter randomized study

    NARCIS (Netherlands)

    Vermeijden, Wytze J; van Klarenbosch, Jan; Gu, Y John; Mariani, Massimo A; Buhre, Wolfgang F; Scheeren, Thomas W L; Hagenaars, Johanna A M; Tan, M Erwin S H; Haenen, Jo S E; Bras, Leo; van Oeveren, Wim; van den Heuvel, Edwin R; de Vries, Adrianus J

    BACKGROUND: Cell-saving devices (CS) are frequently used in cardiac surgery to reduce transfusion requirements, but convincing evidence from randomized clinical trials is missing. Filtration of salvaged blood in combination with the CS is widely used to improve the quality of retransfused blood, but

  2. Pulmonary Artery Pulsatility Index Is Associated With Right Ventricular Failure After Left Ventricular Assist Device Surgery.

    Science.gov (United States)

    Morine, Kevin J; Kiernan, Michael S; Pham, Duc Thinh; Paruchuri, Vikram; Denofrio, David; Kapur, Navin K

    2016-02-01

    Right ventricular failure (RVF) is a major cause of morbidity and mortality after CF-LVAD implantation. We explored the association of pulmonary artery compliance (PAC), pulmonary artery elastance (PAE), and pulmonary artery pulsatility index (PAPi) in addition to established parameters as preoperative determinants of postoperative RVF after CF-LVAD surgery. We retrospectively reviewed 132 consecutive CF-LVAD implantations at Tufts Medical Center from 2008 to 2013. Clinical, hemodynamic, and echocardiographic data were studied. RVF was defined as the unplanned need for a right ventricular assist device or inotrope dependence for ≥14 days. Univariate analysis was performed. RVF occurred in 32 of 132 patients (24%). PAC and PAE were not changed, whereas the PAPi was lower among patients with versus without postoperative RVF (1.32 ± 0.46 vs 2.77 ± 1.16; P < .001). RA pressure, RA to pulmonary capillary wedge pressure ratio (RA:PCWP), and RV stroke work index (RVSWI) were also associated with RVF. Using receiver operating characteristic curve-derived cut-points, PAPi < 1.85 provided 94% sensitivity and 81% specificity (C-statistic = 0.942) for identifying RVF and exceeded the predictive value of RA:PCWP, RVSWI, or RA pressure alone. PAPi is a simple hemodynamic variable that may help to identify patients at high risk of developing RVF after LVAD implantation. Copyright © 2015 Elsevier Inc. All rights reserved.

  3. Ethics, economics and the regulation and adoption of new medical devices: case studies in pelvic floor surgery

    Directory of Open Access Journals (Sweden)

    Ross Sue

    2010-08-01

    Full Text Available Abstract Background Concern has been growing in the academic literature and popular media about the licensing, introduction and adoption of surgical devices before full effectiveness and safety evidence is available to inform clinical practice. Our research will seek empirical survey evidence about the roles, responsibilities, and information and policy needs of the key stakeholders in the introduction into clinical practice of new surgical devices for pelvic floor surgery, in terms of the underlying ethical principals involved in the economic decision-making process, using the example of pelvic floor procedures. Methods/Design Our study involves three linked case studies using, as examples, selected pelvic floor surgery devices representing Health Canada device safety risk classes: low, medium and high risk. Data collection will focus on stakeholder roles and responsibilities, information and policy needs, and perceptions of those of other key stakeholders, in seeking and using evidence about new surgical devices when licensing and adopting them into practice. For each class of device, interviews will be used to seek the opinions of stakeholders. The following stakeholders and ethical and economic principles provide the theoretical framework for the study: Stakeholders - federal regulatory body, device manufacturers, clinicians, patients, health care institutions, provincial health departments, and professional societies. Clinical settings in two centres (in different provinces will be included. Ethics - beneficence, non-maleficence, autonomy, justice. Economics - scarcity of resources, choices, opportunity costs. For each class of device, responses will be analysed to compare and contrast between stakeholders. Applied ethics and economic theory, analysis and critical interpretation will be used to further illuminate the case study material. Discussion The significance of our research in this new area of ethics will lie in providing

  4. Ethics, economics and the regulation and adoption of new medical devices: case studies in pelvic floor surgery

    Science.gov (United States)

    2010-01-01

    Background Concern has been growing in the academic literature and popular media about the licensing, introduction and adoption of surgical devices before full effectiveness and safety evidence is available to inform clinical practice. Our research will seek empirical survey evidence about the roles, responsibilities, and information and policy needs of the key stakeholders in the introduction into clinical practice of new surgical devices for pelvic floor surgery, in terms of the underlying ethical principals involved in the economic decision-making process, using the example of pelvic floor procedures. Methods/Design Our study involves three linked case studies using, as examples, selected pelvic floor surgery devices representing Health Canada device safety risk classes: low, medium and high risk. Data collection will focus on stakeholder roles and responsibilities, information and policy needs, and perceptions of those of other key stakeholders, in seeking and using evidence about new surgical devices when licensing and adopting them into practice. For each class of device, interviews will be used to seek the opinions of stakeholders. The following stakeholders and ethical and economic principles provide the theoretical framework for the study: Stakeholders - federal regulatory body, device manufacturers, clinicians, patients, health care institutions, provincial health departments, and professional societies. Clinical settings in two centres (in different provinces) will be included. Ethics - beneficence, non-maleficence, autonomy, justice. Economics - scarcity of resources, choices, opportunity costs. For each class of device, responses will be analysed to compare and contrast between stakeholders. Applied ethics and economic theory, analysis and critical interpretation will be used to further illuminate the case study material. Discussion The significance of our research in this new area of ethics will lie in providing recommendations for regulatory bodies

  5. Recommendations for radioembolisation after liver surgery using yttrium-90 resin microspheres based on a survey of an international expert panel

    NARCIS (Netherlands)

    Samim, Morsal; van Veenendaal, Linde M; Braat, Manon N G J A; van den Hoven, Andor F; Van Hillegersberg, Richard; Sangro, Bruno; Kao, Yung Hsiang; Liu, Dave; Louie, John D.; Sze, Daniel Y; Rose, Steven C; Brown, Daniel B; Ahmadzadehfar, Hojjat; Kim, Edward; van den Bosch, Maurice A A J; Lam, Marnix G E H

    2017-01-01

    INTRODUCTION: Guidelines on how to adjust activity in patients with a history of liver surgery who are undergoing yttrium-90 radioembolisation ((90)Y-RE) are lacking. The aim was to study the variability in activity prescription in these patients, between centres with extensive experience using

  6. In Vitro Evaluation of Inflow Cannula Fixation Techniques in Left Ventricular Assist Device Surgery.

    Science.gov (United States)

    Hanke, Jasmin S; Krabatsch, Thomas; Rojas, Sebastian V; Deniz, Ezin; Ismail, Issam; Martens, Andreas; Shrestha, Malakh; Haverich, Axel; Netuka, Ivan; Schmitto, Jan D

    2017-03-01

    The therapy of terminal heart failure with left ventricular assist devices has become a standard in cardiac surgery. Yet the surgical implantation technique is not standardized and differs from center to center. Complications associated with left ventricular assist device (LVAD) inflow cannula placement are thrombosis, suction events, and flow disturbances. Within this in vitro study we aimed to investigate if the fixation technique of the sewing ring has an impact on the position of the inflow cannula. For this in vitro study the HeartMate III LVAD (Thoratec Corporation, Pleasanton, CA, USA) was used. In five sessions, two approaches were considered for coring of the ventricle for LVAD inflow cannula insertion: "sew-then-core" and "core-then-sew." In the "sew-then-core" technique, the sewing cuff is first affixed to the heart, usually with 8-16 interrupted pledgeted mattress sutures. Subsequently, a cylindrical knife is used to resect a cylindrical core of myocardium to permit cannula insertion. In the "core-then-sew" technique, the sequence is reversed such that the knife is used before the suture ring is affixed. When the "sew-then-core" technique is used, the mattress sutures may be placed with full-thickness bites that penetrate the endocardium (i.e., transmural stitching) or partial-thickness bites that do not penetrate the endocardium (i.e., epicardial stitching). When the "core-then-sew" technique is used, the suture is passed fully into the ventricular lumen and fed back through the cored hole, at which point the needle may be reinserted into the freshly cored myocardium such that it exits the epicardium (i.e., transmural stitching with back stitch) or not (i.e., transmural stitching without back stitch). These four different sewing ring fixation suturing techniques were tested by experienced surgeons to affix the sewing ring: transmural stitching, epicardial stitching, transmural stitching with back stitch, and transmural stitching without back stitch

  7. Development of Transvaginal Uterus Amputation Device for Laparoscopic Hysterectomies in Gynecologic Surgeries

    Directory of Open Access Journals (Sweden)

    Serkan DİKİCİ

    2015-01-01

    Full Text Available Hysterectomy, that is removal of uterus, is one of the most common major operations in gynecologic surgeries. Laparoscopy technique is preferred in hysterectomy because of its advantages such as lower intra-operative blood loss, decreased surrounding tissue/organ damage, less operating time, lower postoperative infection and frequency of fever, shorter duration of hospitalization and post-operative returning time to normal activity. During total laparoscopic hysterectomy, first uterine vessels and ligaments are cauterized respectively, and then cervicovaginal connections are cauterized and coagulated to remove uterus completely. Uterine manipulators are used during laparoscopy to maximize the endoscopic vision of surgeons by moving related organs. However, conventional uterine manipulators have important drawbacks particularly to move uterus in three dimensions and to show cervicovaginal landmark during laparoscopic circular cauterization and amputation of the uterine cervix. A new transvaginal uterine manipulator may overcome these two important drawbacks of these currently available devices. For this reason, a3D scanned technique was used to get uterus sizes and computer aided design software is used in designing of the new manipulator and then 3D printer was used in prototyping. Special light emitting diodes (LEDs were mounted on the cervical cap of the manipulator to guide light beams from inside of cervicovaginal tissue to abdominal cavity to facilitate the visualization of tissue landmarks. Moreover, performances of different caps and LED systems will be evaluated. Furthermore, after integration of self-cutting and self-suturing mechanisms into our system, final prototype will be produced by using titanium which is biologically and mechanically appropriate. Therefore, aim of this study was to design and produce a new uterine manipulator with three dimensional movements, LED illumination, self-cutting and self-suturing systems to facilitate

  8. Comparison of three supraglottic devices in anesthetised paralyzed children undergoing elective surgery

    Directory of Open Access Journals (Sweden)

    Bikramjit Das

    2012-01-01

    Full Text Available Context: The newest variation of the i-gel supraglottic airway is a pediatric version. Aims: This study was designed to investigate the usefulness of the size 2 i-gel compared with the ProSeal laryngeal mask airway (PLMA and classic laryngeal mask airway (cLMA of the same size in anesthetized, paralyzed children. Settings and design: A prospective, randomized, single-blinded study was conducted in a tertiary care teaching hospital. Methods: Ninety ASA grade I-II patients undergoing lower abdominal, inguinal and orthopedic surgery were included in this prospective study. The patients were randomly assigned to the i-gel, PLMA and cLMA groups (30 patients in each group. Size 2 supraglottic airway was inserted according to the assigned group. We assessed ease of insertion, hemodynamic data, oropharyngeal sealing pressure and postoperative complications. Results: There were no differences in the demographic and hemodynamic data among the three groups. The airway leak pressure of the i-gel group (27.1±2.6 cmH 2 O was significantly higher than that of the PLMA group (22.73±1.2 cmH 2 O and the cLMA group (23.63±2.3 cmH 2 O. The success rates for first attempt of insertion were similar among the three devices. There were no differences in the incidence of postoperative airway trauma, sore throat or hoarse cry in the three groups. Conclusions: Hemodynamic parameters, ease of insertion and postoperative complications were comparable among the i-gel, PLMA and cLMA groups, but airway sealing pressure was significantly higher in the i-gel group.

  9. Nasotracheal tube wire support: a safety device in maxillofacial surgery technical note after five years of experience

    OpenAIRE

    Elias, Fernando Melhem; Sato, F?bio Ricardo Loureiro; Ferraz, Fl?vio Wellington da Silva

    2014-01-01

    A well fixed endotracheal tube is essential for safety during general anesthesia. In maxillofacial surgeries, securely fixing a nasotracheal tube in place has always been problematic. The aim of this article is to describe a simple but effective technique to fasten the nasotracheal tube using a wire support that allows a full range of head movement without interference in the surgical field. During the last 5 years, this device was successfully used in almost two hundred patients with very fe...

  10. Drug, devices, technologies, and techniques for blood management in minimally invasive and conventional cardiothoracic surgery: a consensus statement from the International Society for Minimally Invasive Cardiothoracic Surgery (ISMICS) 2011.

    Science.gov (United States)

    Menkis, Alan H; Martin, Janet; Cheng, Davy C H; Fitzgerald, David C; Freedman, John J; Gao, Changqing; Koster, Andreas; Mackenzie, G Scott; Murphy, Gavin J; Spiess, Bruce; Ad, Niv

    2012-01-01

    The objectives of this consensus conference were to evaluate the evidence for the efficacy and safety of perioperative drugs, technologies, and techniques in reducing allogeneic blood transfusion for adults undergoing cardiac surgery and to develop evidence-based recommendations for comprehensive perioperative blood management in cardiac surgery, with emphasis on minimally invasive cardiac surgery. The consensus panel short-listed the potential topics for review from a comprehensive list of potential drugs, devices, technologies, and techniques. The process of short-listing was based on the need to prioritize and focus on the areas of highest importance to surgeons, anesthesiologists, perfusionists, hematologists, and allied health care involved in the management of patients who undergo cardiac surgery whether through the conventional or minimally invasive approach. MEDLINE, Cochrane Library, and Embase databases were searched from their date of inception to May 2011, and supplemental hand searches were also performed. Detailed methodology and search strategies are outlined in each of the subsequently published systematic reviews. In general, all relevant synonyms for drugs (antifibrinolytic, aprotinin, [Latin Small Letter Open E]-aminocaproic acid, tranexamic acid [TA], desmopressin, anticoagulants, heparin, antiplatelets, anti-Xa agents, adenosine diphosphate inhibitors, acetylsalicylic acid [ASA], factor VIIa [FVIIa]), technologies (cell salvage, miniaturized cardiopulmonary bypass (CPB) circuits, biocompatible circuits, ultrafiltration), and techniques (transfusion thresholds, minimally invasive cardiac or aortic surgery) were searched and combined with terms for blood, red blood cells, fresh-frozen plasma, platelets, transfusion, and allogeneic exposure. The American Heart Association/American College of Cardiology system was used to label the level of evidence and class of each recommendation. Database search identified more than 6900 articles, with 4423 full

  11. Surgery

    Science.gov (United States)

    ... and sterile gloves. Before the surgery begins, a time out is held during which the surgical team confirms ... the Consumer Version. DOCTORS: Click here for the Professional Version What Participants Need to Know About Clinical ...

  12. Stationary Optical Concentrator Designs and Wafer Scale Monolithic Integration of Semiconductor Devices for Next Generation Photovoltaic Panels

    Science.gov (United States)

    Kim, Jung Min

    A major barrier in utilizing solar energy for large scale deployment is the cost of the photovoltaic (PV) systems. Several approaches have been used for the cost reduction such as by modifying PV system designs in addition to enhancing the efficiency of solar cells. Due to the high cost of materials, minimizing the use of solar cells such as in concentrator type systems is highly attractive for reducing the cost of the PV modules by focusing the incident light onto the PV cell. However concentrator PV systems (CPV) require constant tracking of the sun and hence are complex in design and expensive to operate, except in limited situations such as large scale PV power plants. It is desirable to design new concentrator type systems that do not require continuous tracking of the sun. These systems could ultimately reduce the PV system cost to a minimum while maximizing the power conversion efficiency. In this thesis we propose a simple design for a stationary concentrator photovoltaic (SCPV) system that could significantly reduce the cost of generating electricity using PV devices. Using optical ray tracing simulations, we have been able to design SCPV systems that could reduce the PV module cost by 2--10 times without compromising on the power conversion efficiency of the system. Another alternative approach for sustainable high efficiency PV system design is to develop low cost PV cells for terrestrial applications. To meet the demands of low cost and large scale production, larger and thinner (or flexible) substrates are required. We demonstrated the feasibility of fabricating monolithic interconnected PV devices at the wafer scale (2 inch wafers). In this study, GaSb PV cells grown on semi-insulating GaAs were used as the model material. Crucial device fabrication steps such as a selective etching process have been developed that is necessary for isolating individual devices on the wafer and interconnecting them with sub-micron scale accuracy. Selective etching of

  13. Gas emission during laparoscopic colorectal surgery using a bipolar vessel sealing device: A pilot study on four patients

    Directory of Open Access Journals (Sweden)

    Gianella Michele

    2008-09-01

    Full Text Available Abstract Background Dissection during laparoscopic surgery produces smoke containing potentially toxic substances. The aim of the present study was to analyze smoke samples produced during laparoscopic colon surgery using a bipolar vessel sealing device (LigaSure™. Methods Four consecutive patients undergoing left-sided colectomy were enrolled in this pilot study. Smoke was produced by the use of LigaSure™. Samples (5,5l were evacuated from the pneumoperitoneum in a closed system into a reservoir. Analysis was performed with CO2-laser-based photoacoustic spectroscopy and confirmed by a Fourier-transform infrared spectrum. The detected spectra were compared to the available spectra of known toxins. Results Samples from four laparoscopic sigmoid resections were analyzed. No relevant differences were noted regarding patient and operation characteristics. The gas samples were stable over time proven by congruent control measurements as late as 24 h after sampling. The absorption spectra differed considerably between the patients. One broad absorption line at 100 ppm indicating H2O and several unknown molecules were detected. With a sensitivity of alpha min ca 10-5 cm-1 no known toxic substances like phenol or indole were identified. Conclusion The use of a vessel sealing device during laparoscopic surgery does not produce known toxic substances in relevant quantity. Further studies are needed to identify unknown molecules and to analyze gas emission under various conditions.

  14. Metabolic Panel

    Science.gov (United States)

    A metabolic panel is a group of tests that measures different chemicals in the blood. These tests are usually done on ... and liver. There are two types: basic metabolic panel (BMP) and comprehensive metabolic panel (CMP). The BMP ...

  15. Cone-beam CT with a flat-panel detector on a mobile C-arm: preclinical investigation in image-guided surgery of the head and neck

    Science.gov (United States)

    Siewerdsen, J. H.; Chan, Y.; Rafferty, M. A.; Moseley, D. J.; Jaffray, D. A.; Irish, J. C.

    2005-04-01

    A promising imaging platform for combined low-dose fluoroscopy and cone-beam CT (CBCT) guidance of interventional procedures has been developed in our laboratory. Based on a mobile isocentric C-arm (Siemens PowerMobil) incorporating a high-performance flat-panel detector (Varian PaxScan 4030CB), the system demonstrates sub-mm 3D spatial resolution and soft-tissue visibility with field of view sufficient for head and body sites. For pre-clinical studies in head neck tumor surgery, we hypothesize that the 3D intraoperative information provided by CBCT permits precise, aggressive techniques with improved avoidance of critical structures. The objectives include: 1) quantify improvement in surgical performance achieved with CBCT guidance compared to open and endoscopic techniques; and 2) investigate specific, challenging surgical tasks under CBCT guidance. Investigations proceed from an idealized phantom model to cadaveric specimens. A novel surgical performance evaluation method based on statistical decision theory is applied to excision and avoidance tasks. Analogous to receiver operating characteristic (ROC) analysis in medical imaging, the method quantifies surgical performance in terms of Lesion-Excised (True-Positve), Lesion-Remaining (False-Negative), Normal-Excised (False-Positive), and Normal-Remaining (True-Negative) fractions. Conservative and aggressive excision and avoidance tasks are executed in 12 cadaveric specimens with and without CBCT guidance, including: dissection through dura, preservation of posterior lamina, ethmoid air cells removal, exposure of peri-orbita, and excision of infiltrated bone in the skull base (clivus). Intraoperative CBCT data was found to dramatically improve surgical performance and confidence in the execution of such tasks. Pre-clinical investigation of this platform in head and neck surgery, as well as spinal, trauma, biopsy, and other nonvascular procedures, is discussed.

  16. Novel Na(+) doped Alq3 hybrid materials for organic light-emitting diode (OLED) devices and flat panel displays.

    Science.gov (United States)

    Bhagat, S A; Borghate, S V; Kalyani, N Thejo; Dhoble, S J

    2015-05-01

    Pure and Na(+) -doped Alq3 complexes were synthesized by a simple precipitation method at room temperature, maintaining a stoichiometric ratio. These complexes were characterized by X-ray diffraction, Fourier transform infrared (FTIR), UV/Vis absorption and photoluminescence (PL) spectra. The X-ray diffractogram exhibits well-resolved peaks, revealing the crystalline nature of the synthesized complexes, FTIR confirms the molecular structure and the completion of quinoline ring formation in the metal complex. UV/Vis absorption and PL spectra of sodium-doped Alq3 complexes exhibit high emission intensity in comparison with Alq3 phosphor, proving that when doped in Alq3 , Na(+) enhances PL emission intensity. The excitation spectra of the synthesized complexes lie in the range 242-457 nm when weak shoulders are also considered. Because the sharp excitation peak falls in the blue region of visible radiation, the complexes can be employed for blue chip excitation. The emission wavelength of all the synthesized complexes lies in the bluish green/green region ranging between 485 and 531 nm. The intensity of the emission wavelength was found to be elevated when Na(+) is doped into Alq3 . Because both the excitation and emission wavelengths fall in the visible region of electromagnetic radiation, these phosphors can also be employed to improve the power conversion efficiency of photovoltaic cells by using the solar spectral conversion principle. Thus, the synthesized phosphors can be used as bluish green/green light-emitting phosphors for organic light-emitting diodes, flat panel displays, solid-state lighting technology - a step towards the desire to reduce energy consumption and generate pollution free light. Copyright © 2014 John Wiley & Sons, Ltd.

  17. Efficacy and safety of biodegradable osteofixation devices in oral and maxillofacial surgery : a systematic review

    NARCIS (Netherlands)

    Buijs, G. J.; Stegenga, B.; Bos, R. R. M.

    2006-01-01

    The use of osteofixation devices should be evidence-based if uncomplicated bone healing is to be achieved. Numerous studies describe and claim the advantages of biodegradable over titanium devices as a bone fixation method. Here, we systematically review the available literature to determine the

  18. Surgery

    Science.gov (United States)

    ... surgery has several common causes, including the following: Infections at the operative site Lung problems such as pneumonia or collapsed lung ... the trauma of an operation. The risk of infections at the operative site, DVTs, and UTIs can be decreased by meticulous ...

  19. Nasotracheal tube wire support: a safety device in maxillofacial surgery technical note after five years of experience

    Directory of Open Access Journals (Sweden)

    Fernando Melhem Elias

    2014-03-01

    Full Text Available A well fixed endotracheal tube is essential for safety during general anesthesia. In maxillofacial surgeries, securely fixing a nasotracheal tube in place has always been problematic. The aim of this article is to describe a simple but effective technique to fasten the nasotracheal tube using a wire support that allows a full range of head movement without interference in the surgical field. During the last 5 years, this device was successfully used in almost two hundred patients with very few complications.

  20. A new radiographic method for evaluating the degree of sliding in devices used in hip-fracture surgery

    International Nuclear Information System (INIS)

    Lunsjoe, K.; Ceder, L.; Aastroem, K.; Sparr, G.; Heyden, A.; Spanne, S.; Stigsson, L.; Hauggaard, A.

    1997-01-01

    Purpose: To find a practical method for estimating the degree of sliding that occurs in screw-plate devices used in hip-fracture surgery. Greater understanding of the sliding mechanisms in different fracture types should improve surgical technique and reduce the failure rate. Methods and Results: In dynamic screw-plate devices, the lag screw slides inside the barrel of the plate. A recent innovation allows the barrel-plate to slide inside a side-plate, thus making possible a combined fracture compression along the neck and the shaft of femur. The lengths of the different parts and the angle of a device in vivo, measured on a radiograph, depend on the position of the femur relative to the photographic film and the roentgen source. We obtained these measurements with a ruler and a protractor from sequential a.p. radiographs of the hip and implemented them in a special computerized program that used the principles of the scaled orthographic and the central projection models. These calculations provided the correct amount of sliding by the lag screw and by the barrel-plate within the side-plate. Conclusion: The method presented here can establish the real degree of sliding in screw-plate devices from standard a.p. radiographs independently of the position of the hip. (orig.)

  1. Efficacy of an imaging device at identifying the presence of bacteria in wounds at a plastic surgery outpatients clinic.

    Science.gov (United States)

    Blackshaw, Ellen L; Jeffery, Steven L A

    2018-01-02

    Current standard diagnostic practice of bacterial infections by visual inspection under white light is subjective, and microbiological sampling is suboptimal due to high false negative rates and the lengthy time needed for culture results to arrive. The MolecuLight i:X Imaging Device attempts to combat the issues faced in standard practice by providing a non-contact, real-time method of visualising bacteria within wounds. Our aim was to test this imaging device in a series of patients. A single-centre prospective observational study was conducted in the Queen Elizabeth Hospital, Birmingham. During Plastic Surgery Outpatient dressings clinics, patients had their wounds photographed with the imaging device under white light and violet light illumination. Microbiological swabs were obtained of all the wounds. Any clinical signs and symptoms of infection were noted. White light and violet light photographs were compared with correlate visible clinical signs and symptoms with auto-fluorescence images. Auto-fluorescence images were then compared with the microbiological swab results to discern any differences. There were 14 patients with seventeen separate wounds imaged. Of the 17, eight wounds were positive for bacterial growth on microbiological culture. All eight of these were detected positive for bacteria according to auto-fluorescence imaging. There was one wound was detected positive for bacteria by auto-fluorescence imaging with negative microbiological results. This study demonstrated the potential benefit of the imaging device due to the correlation between microbiological test results and auto-fluorescence imaging. The device greatly reduces the time taken waiting for results and it is simple, quick to use and non-contact. There is potential for the imaging device to guide swab sampling and aid health professionals in the diagnosis and management of wound infections.

  2. Mobile Device Trends in Orthopedic Surgery: Rapid Change and Future Implications.

    Science.gov (United States)

    Andrawis, John P; Muzykewicz, David A; Franko, Orrin I

    2016-01-01

    Mobile devices are increasingly becoming integral communication and clinical tools. Monitoring the prevalence and utilization characteristics of surgeons and trainees is critical to understanding how these new technologies can be best used in practice. The authors conducted a prospective Internet-based survey over 7 time points from August 2010 to August 2014 at all nationwide American Council for Graduate Medical Education-accredited orthopedic programs. The survey questionnaire was designed to evaluate the use of devices and mobile applications (apps) among trainees and physicians in the clinical setting. Results were analyzed and summarized for orthopedic surgeons and trainees. During the 48-month period, there were 7 time points with 467, 622, 329, 223, 237, 111, and 134 responses. Mobile device use in the clinical setting increased across all fields and levels of training during the study period. Orthopedic trainees increased their use of Smartphone apps in the clinical setting from 60% to 84%, whereas attending use increased from 41% to 61%. During this time frame, use of Apple/Android platforms increased from 45%/13% to 85%/15%, respectively. At all time points, 70% of orthopedic surgeons believed their institution/hospital should support mobile device use. As measured over a 48-month period, mobile devices have become an ubiquitous tool in the clinical setting among orthopedic surgeons and trainees. The authors expect these trends to continue and encourage providers and trainees to be aware of the limitations and risks inherent with new technology. Copyright 2016, SLACK Incorporated.

  3. Preoperative three-dimensional echocardiography to assess risk of right ventricular failure after left ventricular assist device surgery.

    Science.gov (United States)

    Kiernan, Michael S; French, Amy L; DeNofrio, David; Parmar, Yuvrajsinh J; Pham, Duc Thinh; Kapur, Navin K; Pandian, Natesa G; Patel, Ayan R

    2015-03-01

    Right ventricular failure (RVF) is associated with significant morbidity after left ventricular assist device (LVAD) surgery. Hemodynamic, clinical, and 2-dimensional echocardiographic variables poorly discriminate patients at risk of RVF. We examined the utility of 3-dimensional echocardiography (3DE) right ventricular (RV) volumetric assessment to identify patients at risk for RVF. RVF was defined as the need for inotropic infusion for >14 days after LVAD surgery or the need for biventricular assist device support. Preoperative RV volumes and ejection fraction (EF) were measured, blinded to clinical data, from transthoracic 3DE full volume data sets in 26 patients. Baseline variables and 3DE RV indices were compared between patients with and without RVF. Twenty-four patients received continuous-flow LVADs, and 2 required biventricular support devices. Ten patients required prolonged inotropes after LVAD placement. Baseline characteristics associated with RVF included higher right atrial pressure, higher right atrial pressure to pulmonary capillary wedge pressure ratio, and lower cardiac index and RV stroke work index (RVSWI). Echocardiographic indices associated with RVF included 3DE indexed RV end-diastolic and end-systolic volumes (RVEDVI and RVESVI) and RV ejection fraction (RVEF). The relationship between 3DE quantification of RV volumes and the development of RVF was independent from RVSWI: RVEDVI: odds ratio (OR) 1.16, 95% confidence interval (CI) 1.00-1.33 (P = .04); RVESVI: OR 1.14, 95% CI 1.01-1.28 (P = .03). Quantitative 3DE is a promising method for pre-LVAD RV assessment. RV volumes assessed by 3DE are predictive of RVF in LVAD recipients independently from hemodynamic correlates of RV function. Copyright © 2015 Elsevier Inc. All rights reserved.

  4. The effect of nasal surgery on continuous positive airway pressure device use and therapeutic treatment pressures: a systematic review and meta-analysis.

    Science.gov (United States)

    Camacho, Macario; Riaz, Muhammad; Capasso, Robson; Ruoff, Chad M; Guilleminault, Christian; Kushida, Clete A; Certal, Victor

    2015-02-01

    The relationship between nasal surgery and its effect on continuous positive airway pressure (CPAP) device therapeutic treatment pressures and CPAP device use has not been previously systematically examined. To conduct a systematic review and meta-analysis evaluating the effect of isolated nasal surgery on therapeutic CPAP device pressures and use in adults with obstructive sleep apnea (OSA). MEDLINE, Scopus, Web of Science, and The Cochrane Library were searched through July 15, 2014. The MOOSE consensus statement and PRISMA statement were followed. Eighteen studies (279 patients) reported CPAP data after isolated nasal surgery. Seven studies (82 patients) reported preoperative and postoperative mean therapeutic CPAP device pressures and standard deviations (SD), which reduced from 11.6 ± 2.2 to 9.5 ± 2.0 centimeters of water pressure (cwp) after nasal surgery. Pooled random effects analysis demonstrated a statistically significant pressure reduction, with a mean difference (MD) of -2.66 cwp (95% confidence interval (CI), -3.65 to -1.67); P CPAP use; and a subgroup analysis demonstrated that 89.1% (57 of 64 patients) who were not using CPAP prior to nasal surgery subsequently accepted, adhered to, or tolerated it after nasal surgery. Objective, device meter-based hours of use increased in 33 patients from 3.0 ± 3.1 to 5.5 ± 2.0 h in the short term (nasal surgery in patients with OSA and nasal obstruction reduces therapeutic CPAP device pressures and the currently published literature's objective and subjective data consistently suggest that it also increases CPAP use in select patients. © 2015 Associated Professional Sleep Societies, LLC.

  5. Design of a 7-DOF haptic master using a magneto-rheological devices for robot surgery

    Science.gov (United States)

    Kang, Seok-Rae; Choi, Seung-Bok; Hwang, Yong-Hoon; Cha, Seung-Woo

    2017-04-01

    This paper presents a 7 degrees-of-freedom (7-DOF) haptic master which is applicable to the robot-assisted minimally invasive surgery (RMIS). By utilizing a controllable magneto-rheological (MR) fluid, the haptic master can provide force information to the surgeon during surgery. The proposed haptic master consists of three degrees motions of X, Y, Z and four degrees motions of the pitch, yaw, roll and grasping. All of them have force feedback capability. The proposed haptic master can generate the repulsive forces or torques by activating MR clutch and MR brake. Both MR clutch and MR brake are designed and manufactured with consideration of the size and output torque which is usable to the robotic surgery. A proportional-integral-derivative (PID) controller is then designed and implemented to achieve torque/force tracking trajectories. It is verified that the proposed haptic master can track well the desired torque and force occurred in the surgical place by controlling the input current applied to MR clutch and brake.

  6. Trends in the Management of Patients With Left Ventricular Assist Devices Presenting for Noncardiac Surgery: A 10-Year Institutional Experience.

    Science.gov (United States)

    Stone, Marc; Hinchey, Joseph; Sattler, Christopher; Evans, Adam

    2016-09-01

    In our institution, the vast majority of patients presenting for noncardiac surgery (NCS) while supported by a left ventricular assist device (LVAD) are now cared for by noncardiac-trained anesthesiologists as the result of a decade of educational intervention to effect this transition. This represents a significant departure from the published experiences of other institutions. With institutional review board approval, we queried the database of our anesthesia record keeping system (CompuRecord) to determine various aspects of the perioperative management of these patients from July 1, 2003, through June 30, 2013, during which time 271 NCS procedures were performed on adult patients supported by LVADs. Over the entire study period (2003-2013), anesthetic care was provided by a cardiac anesthesiologist 47% of the time and by a noncardiac anesthesiologist 53% of the time. However, by the time period 2012-2013, 88% of the NCS procedures were staffed by a noncardiac anesthesiologist. Despite the prevalence of continuous flow devices in this series, the use of invasive blood pressure monitoring decreased dramatically by the later years of the study. Vasoactive and inotropic medications were rarely required intraoperatively. No intraoperative cardiac arrests, thromboembolic complications, or device malfunctions occurred. Our conclusion is that NCS procedures on LVAD-supported patients can be safely managed by educated noncardiac anesthesiologists. © The Author(s) 2015.

  7. Comparison of Cobra perilaryngeal airway (CobraPLA TM with flexible laryngeal mask airway in terms of device stability and ventilation characteristics in pediatric ophthalmic surgery

    Directory of Open Access Journals (Sweden)

    Rani A Sunder

    2012-01-01

    Full Text Available Background: Supraglottic airway devices play an important role in ophthalmic surgery. The flexible laryngeal mask airway (LMA TM is generally the preferred airway device. However, there are no studies comparing it with the Cobra perilaryngeal airway (CobraPLA TM in pediatric ophthalmic procedures. Aims: To analyze the intraoperative device stability and ability to maintain normocarbia of CobraPLA TM and compare it to that with flexible LMA TM . Materials and Methods: Ninety children of American Society for Anesthesiologists physical status 1 and 2, aged 3-15 years scheduled for elective ophthalmic surgeries were randomly assigned to either the CobraPLA TM or the flexible LMA TM group. After placement of each airway device, oropharyngeal leak pressure (OLP was noted. Adequate seal of the devices was confirmed at an inspired pressure of 15 cm H 2 O and pressure-controlled ventilation was initiated. Device displacement was diagnosed if there was a change in capnograph waveform, audible or palpable gas leak, change in expired tidal volume to 6 kPa, or need to increase inspired pressure to >18 cm H 2 O to maintain normocarbia. Results: Demographic data, duration, and type of surgery in both the groups were similar. A higher incidence of intraoperative device displacement was noted with the CobraPLA TM in comparison to flexible LMA TM (P < 0.001. Incidence of displacement was higher in strabismus surgery (7/12. Insertion characteristics and ventilation parameters were comparable. The OLP was significantly higher in CobraPLA TM group (28 ± 6.8 cm H 2 O compared to the flexible LMA TM group (19.9 ± 4.5 cm H 2 O (P < 0.001. Higher surgeon dissatisfaction (65.9% was seen in the CobraPLA TM group. Conclusion: The high incidence of device displacement and surgeon dissatisfaction make CobraPLA TM a less favorable option than flexible LMA TM in ophthalmic surgery.

  8. Comparison of cost-effectiveness and postoperative outcome of device closure and open surgery closure techniques for treatment of patent ductus arteriosus.

    Science.gov (United States)

    Ahmadi, Alireza; Sabri, Mohammadreza; Bigdelian, Hamid; Dehghan, Bahar; Gharipour, Mojgan

    2014-01-01

    Various devices have been recently employed for percutaneous closure of the patent ductus arteriosus (PDA). Although the high effectiveness of device closure techniques has been clearly determined, a few studies have focused on the cost-effectiveness and also postoperative complications of these procedures in comparison with open surgery. The present study aimed to evaluate the clinical outcome and cost-effectiveness of PDA occlusion by Amplatzer and coil device in comparisong with open surgery. In this cross-sectional study, a randomized sample of 201 patients aged 1 month to 16 years (105 patients with device closure and 96 patients with surgical closure) was selected. The ratio of total pulmonary blood flow to total systemic blood flow, the Qp/Qs ratio, was measured using a pulmonary artery catheter. The cost analysis included direct medical care costs associated with device implantation and open surgery, as well as professional fees. All costs were calculated in Iranian Rials and then converted to US dollars. There was no statistical difference in mean Qp/Qs ratio before the procedure between the device closure group and the open surgery group (2.1 ± 0.7 versus 1.7 ± 0.6, P = 0.090). The mean measured costs were overall higher in the device closure group than in open closure group (948.87 ± 548.76 US$ versus 743.70 ± 696.91 US$, P gender (Standardized Beta = 0.160, P = 0.031). PDA closure with the Amplatzer ductal occluder (1053.05 ± 525.73 US$) or with Nit-Occlud coils (PFM) (912.73 ± 565.94 US$, P < 0.001) was more expensive than that via open surgery. However, the Cook detachable spring coils device closure (605.65 ± 194.62 US$, P = 0.650) had a non-significant cost difference with open surgery. No event was observed in the device closure group regarding in-hospital mortality or morbidity; however, in another group, 2 in-hospital deaths occurred, two patients experienced pneumonia and seizure, and one suffered electrolyte abnormalities including

  9. Management of left ventricular assist devices after surgery: bridge, destination, and recovery.

    Science.gov (United States)

    Mountis, Maria M; Starling, Randall C

    2009-05-01

    As the use and understanding of mechanical circulatory support (MCS) increases, the management of these devices has become more conventional. The purpose of this review is to discuss the perioperative and long-term management of MCS patients. With the advent of axial flow pumps, both perioperative and long-term management are more standardized. The issues of nutrition, physical therapy, drive line care, and readiness to transition to home are becoming more mainstream and are readily accepted into the community. However, many factors remain that are not well defined in dealing with anticoagulation, weaning of MCS, achieving optimal device settings, and end-of-life care. Care for the MCS patient provided in a multidisciplinary team approach is imperative to allow for a seamless transition from the hospital and into the community and successful long-term outcomes.

  10. Extending the reach of stapled anastomosis with a prepared OrVil™ device in laparoscopic oesophageal and gastric cancer surgery.

    Science.gov (United States)

    Salih, Abdelmonim E A; Bass, Gary A; D'Cruz, Yvonne; Brennan, Robert P; Smolarek, Sebastian; Arumugasamy, Mayilone; Walsh, Thomas N

    2015-04-01

    The introduction of minimally invasive surgery and the use of laparoscopic techniques have significantly improved patient outcomes and have offered a new range of options for the restoration of intestinal continuity. Various reconstruction techniques have been described and various devices employed but none has been established as superior. This study evaluates our experience with, and modifications of, the orally inserted anvil (OrVil™). We conducted a prospective observational study on 72 consecutive patients who underwent OrVil™-assisted oesophago-gastric or oesophago-jejunal anastomosis between September 2010 and September 2013. We collected data including patient demographics, disease site, type of procedure, location of the anastomosis, involvement of resection margins and peri-operative complications. Seventy-two patients were included in the study. Patient ages ranged from 45 to 92 years (median ± SD = 69 ± 10 years). Total gastrectomy with Roux-en-Y anastomosis was the most-commonly performed procedure (n = 41; 57 %). R 0 resection was achieved in 67 patients (93 %). There were no Orvil™-related clinical leaks during the study period, and just two patients (2.8 %) demonstrated radiological evidence of leak, both of whom were managed conservatively. There were three in-hospital mortalities during the study period; these were unrelated to the anastomotic technique. Despite a steep learning curve, the OrVil™ device is safe and reliable. It also permits the creation of higher trans-hiatal anastomoses without resorting to thoracotomy in high-risk patients with cardia tumours. Certain shortcomings of the device, that had implications for patient safety, were identified and addressed by intra-operative modification during the study period. We commend the use of a prepared OrVil™ device, as a game changer, for upper gastrointestinal reconstruction.

  11. Panel Analysis

    DEFF Research Database (Denmark)

    Brænder, Morten; Andersen, Lotte Bøgh

    2014-01-01

    where panel attrition, the practical and ethical challenges of contacting the same respondents at different points of time may affect response rates negatively. In the article, we present some key distinctions regarding panel data and analyses, and in the subsequent exercises we invite readers to apply...... these concepts on a number of recently published panel studies....

  12. Mycobacterium chimaera Infections Associated With Contaminated Heater-Cooler Devices for Cardiac Surgery: Outbreak Management.

    Science.gov (United States)

    Marra, Alexandre R; Diekema, Daniel J; Edmond, Michael B

    2017-08-15

    The global outbreak of Mycobacterium chimaera infections associated with heater-cooler devices (HCDs) presents several important, unique challenges for the infection prevention community. The primary focus of this article is to assist hospitals in establishing a rapid response for identification, notification, and evaluation of exposed patients, and management of HCDs with regard to placement and containment, environmental culturing, and disinfection. © The Author 2017. Published by Oxford University Press for the Infectious Diseases Society of America. All rights reserved. For permissions, e-mail: journals.permissions@oup.com.

  13. A wound retraction device for laparoscopic-assisted intestinal surgery in dogs and cats.

    Science.gov (United States)

    Gower, Sara B; Mayhew, Philipp D

    2011-06-01

    To report experience with laparoscopic-assisted intestinal resection and anastomosis for treatment of discrete intestinal masses using a novel wound retraction device. Case series. Dogs (n=2) and cats (6). Dogs and cats with discrete intestinal masses identified by ultrasonography without evidence of intestinal perforation or peritonitis, were included. A 2 portal technique was used; 1 portal was enlarged for insertion of the wound retraction device through which the intestine was examined as thoroughly as possible. The diseased portion of the intestine was exteriorized through the wound retractor and resection and anastomosis of the intestinal mass performed. Of the 8 animals, laparoscopic-assisted intestinal resection and anastomosis through the wound retractor was performed in 2 dogs and 3 cats. In 3 cats, based on either location or extent of the lesion, 2 were converted to laparoscopic-assisted intestinal biopsies and 1 to an open colocolostomy. No other intra- or perioperative complications were encountered and all animals survived to discharge. Laparoscopic-assisted intestinal resection and anastomosis can be performed in select canine and feline patients with modestly sized, discrete intestinal masses. © Copyright 2011 by The American College of Veterinary Surgeons.

  14. Intraoperative evaluation of device placement in spine surgery using known-component 3D-2D image registration

    Science.gov (United States)

    Uneri, A.; De Silva, T.; Goerres, J.; Jacobson, M. W.; Ketcha, M. D.; Reaungamornrat, S.; Kleinszig, G.; Vogt, S.; Khanna, A. J.; Osgood, G. M.; Wolinsky, J.-P.; Siewerdsen, J. H.

    2017-04-01

    Intraoperative x-ray radiography/fluoroscopy is commonly used to assess the placement of surgical devices in the operating room (e.g. spine pedicle screws), but qualitative interpretation can fail to reliably detect suboptimal delivery and/or breach of adjacent critical structures. We present a 3D-2D image registration method wherein intraoperative radiographs are leveraged in combination with prior knowledge of the patient and surgical components for quantitative assessment of device placement and more rigorous quality assurance (QA) of the surgical product. The algorithm is based on known-component registration (KC-Reg) in which patient-specific preoperative CT and parametric component models are used. The registration performs optimization of gradient similarity, removes the need for offline geometric calibration of the C-arm, and simultaneously solves for multiple component bodies, thereby allowing QA in a single step (e.g. spinal construct with 4-20 screws). Performance was tested in a spine phantom, and first clinical results are reported for QA of transpedicle screws delivered in a patient undergoing thoracolumbar spine surgery. Simultaneous registration of ten pedicle screws (five contralateral pairs) demonstrated mean target registration error (TRE) of 1.1  ±  0.1 mm at the screw tip and 0.7  ±  0.4° in angulation when a prior geometric calibration was used. The calibration-free formulation, with the aid of component collision constraints, achieved TRE of 1.4  ±  0.6 mm. In all cases, a statistically significant improvement (p  surgery demonstrated TRE of 2.7  ±  2.6 mm and 1.5  ±  0.8°. The KC-Reg algorithm offers an independent check and quantitative QA of the surgical product using radiographic/fluoroscopic views acquired within standard OR workflow. Such intraoperative assessment could improve quality and safety, provide the opportunity to revise suboptimal constructs in the OR, and reduce the

  15. Optimisation of a Cymbal Transducer for Its Use in a High-power Ultrasonic Cutting Device for Bone Surgery

    Science.gov (United States)

    Bejarano, Fernando; Feeney, Andrew; Lucas, Margaret

    The class V cymbal is a flextensional transducer commonly used in low-power ultrasonic applications. The resonance frequency of the transducer can be tailored by the choice of end-cap and driver materials, and the dimensions of the end-caps. The cymbal transducer has one significant limitation which restricts the operational vibration amplitude of the device. This is the limit imposed by the mechanical strength of the bonding agent between the metal end-cap and the piezoceramic driver. Therefore, when there is an increase in the input power or displacement, the stresses in the bonding layer can lead to debonding, thereby rendering the cymbal transducer ineffective for high-power ultrasonic applications. In this paper, several experimental analyses have been performed, complemented by the use of Abaqus/CAE finite element analysis, in order to develop a high-power ultrasonic cutting device for bone surgery using a new configuration of cymbal transducer, which is optimised for operation at high displacement and high input power. This new transducer uses a combination of a piezoceramic disc with a metal ring as the driver, thereby improving the mechanical coupling with the metal end-cap.

  16. Quality-of-life outcomes after bone-anchored hearing device surgery in children with single-sided sensorineural deafness.

    Science.gov (United States)

    Doshi, Jayesh; Banga, Rupan; Child, Anne; Lawrence, Rebecca; Reid, Andrew; Proops, David; McDermott, Ann-Louise

    2013-01-01

    To report our experience in a series of children with single-sided sensorineural deafness where a bone-anchored hearing device (BAHD) was used for auditory rehabilitation. Retrospective case review. Tertiary referral centre. Eight children (4 boys and 4 girls) who had BAHD surgery for single-sided sensorineural deafness between 2007 and 2010. Bone-anchored hearing device was used for auditory rehabilitation. Glasgow Children's Benefit Inventory (GCBI), Single-sided Deafness (SSD) Questionnaire and change in health benefit scores (visual analogue scale). All but one of the children showed a positive GCBI score; the child that reported a negative score was because of low self confidence and self-esteem issues secondary to bullying at school. The results of the SSD questionnaire were generally positive with a mean satisfaction score of the BAHD as 9/10. All the children had an improvement in heath benefit. Our findings add further evidence to support patient perceived benefit of a BAHD in single sided sensorineural deafness in the paediatric population.

  17. Do lumbar motion preserving devices reduce the risk of adjacent segment pathology compared with fusion surgery? A systematic review.

    Science.gov (United States)

    Wang, Jeffrey C; Arnold, Paul M; Hermsmeyer, Jeffrey T; Norvell, Daniel C

    2012-10-15

    17 operations, one might expect a new clinical ASP event requiring surgery when treated with fusion in those otherwise not harmed by TDR. There was insufficient literature to answer the other key questions, resulting in low to insufficient evidence that other motion-sparing operations are superior to fusion in preventing clinical ASP. There does seem to be a low rate of ASP after lumbar spinal fusion. The evidence suggests that the risk of clinical ASP following fusion is higher when compared with TDR, but there is limited evidence that fusion may increase the risk of developing clinical ASP compared with other motion-sparing procedures. 1. Evidence demonstrates that the risk of clinical ASP requiring surgery is likely greater after fusion but the risk is still quite rare. The increased risk compared to TDR could be as small as less than 1% or as great as 10%. Strength of Statement: Weak. 2. There is insufficient evidence to make a definitive statement regarding fusion versus other motion-sparing devices with respect to the risk of ASP.

  18. Solar panel parallel mounting configuration

    Science.gov (United States)

    Mutschler, Jr., Edward Charles (Inventor)

    1998-01-01

    A spacecraft includes a plurality of solar panels interconnected with a power coupler and an electrically operated device to provide power to the device when the solar cells are insolated. The solar panels are subject to bending distortion when entering or leaving eclipse. Spacecraft attitude disturbances are reduced by mounting each of the solar panels to an elongated boom made from a material with a low coefficient of thermal expansion, so that the bending of one panel is not communicated to the next. The boom may be insulated to reduce its bending during changes in insolation. A particularly advantageous embodiment mounts each panel to the boom with a single mounting, which may be a hinge. The single mounting prevents transfer of bending moments from the panel to the boom.

  19. Volume CT with a flat-panel detector on a mobile, isocentric C-arm: pre-clinical investigation in guidance of minimally invasive surgery.

    Science.gov (United States)

    Siewerdsen, J H; Moseley, D J; Burch, S; Bisland, S K; Bogaards, A; Wilson, B C; Jaffray, D A

    2005-01-01

    A mobile isocentric C-arm (Siemens PowerMobil) has been modified in our laboratory to include a large area flat-panel detector (in place of the x-ray image intensifier), providing multi-mode fluoroscopy and cone-beam computed tomography (CT) imaging capability. This platform represents a promising technology for minimally invasive, image-guided surgical procedures where precision in the placement of interventional tools with respect to bony and soft-tissue structures is critical. The image quality and performance in surgical guidance was investigated in pre-clinical evaluation in image-guided spinal surgery. The control, acquisition, and reconstruction system are described. The reproducibility of geometric calibration, essential to achieving high three-dimensional (3D) image quality, is tested over extended time scales (7 months) and across a broad range in C-arm angulation (up to 45 degrees), quantifying the effect of improper calibration on spatial resolution, soft-tissue visibility, and image artifacts. Phantom studies were performed to investigate the precision of 3D localization (viz., fiber optic probes within a vertebral body) and effect of lateral projection truncation (limited field of view) on soft-tissue detectability in image reconstructions. Pre-clinical investigation was undertaken in a specific spinal procedure (photodynamic therapy of spinal metastases) in five animal subjects (pigs). In each procedure, placement of fiber optic catheters in two vertebrae (L1 and L2) was guided by fluoroscopy and cone-beam CT. Experience across five procedures is reported, focusing on 3D image quality, the effects of respiratory motion, limited field of view, reconstruction filter, and imaging dose. Overall, the intraoperative cone-beam CT images were sufficient for guidance of needles and catheters with respect to bony anatomy and improved surgical performance and confidence through 3D visualization and verification of transpedicular trajectories and tool placement

  20. Endodontic surgery using 2 different magnification devices: preliminary results of a randomized controlled study.

    Science.gov (United States)

    Taschieri, Silvio; Del Fabbro, Massimo; Testori, Tiziano; Francetti, Luca; Weinstein, Roberto

    2006-02-01

    The introduction of microsurgical instruments and magnification devices has brought advantages in root-end management and the application of root-end filling materials. The main purpose of this prospective clinical study was to monitor the outcome of ultrasonic root-end preparation using magnification loupes or an endoscope. Tooth location and the presence of post restoration were also examined as potentially affecting the outcome. Teeth treated surgically showed a periradicular lesion of strictly endodontic origin. A total of 59 patients were included in the study, according to specific selection criteria. Following the reflection of a full mucoperiosteal tissue flap, residual soft tissues were curetted, root ends were resected, and root-end cavities were prepared ultrasonically with a zirconium nitrate tip, and zinc oxide EBA-reinforced cement root-end fillings were placed. Thirty-two root-end management procedures were performed using magnification loupes and 39 using an endoscope. All cases followed for a period of 1 year were classified into 3 groups (success, uncertain healing, and failure) according to radiographic and clinical criteria. Of the 71 teeth evaluated at 1-year follow-up, 67 teeth (92.95%) successfully healed, 3 teeth had uncertain healing, and 2 failed. In the group using endoscopy, 94.9% of successful healing was achieved, while for the other group, 90.6% was recorded. We found no statistically significant differences in treatment results related to the arch (P = .20), post restoration (P = .21), or type of magnification device (P = .08). In the present study, adherence to a strict endodontic surgical protocol and the use of modern surgical endodontic procedures, together with visual magnifications, resulted in an overall high success rate.

  1. Stability Testing of a Wide Bone-Anchored Device after Surgery without Skin Thinning

    Directory of Open Access Journals (Sweden)

    Malou Hultcrantz

    2015-01-01

    Full Text Available Objective. To longitudinally follow the osseointegration using Resonance Frequency Analysis (RFA for different lengths of abutment on a new wide bone-anchored implant, introduced with the non-skin thinning surgical technique. Study Design. A single-center, prospective 1 year study following adults with bone-anchored hearing implants. Materials and Methods. Implantation was performed and followed for a minimum of 1 year. All patients were operated on according to the tissue preserving technique. A 4.5 mm wide fixture (Oticon Medical with varying abutments (9 to 12 mm was used and RFA was tested 1 week, 7 weeks, 6 months, and 12 months later. Implant Stability Quotient (ISQ, was measured from 1 to 100. Stability was compared to a group of patients (N=7 implanted with another brand (Cochlear BI400 of 4.5 mm fixtures. Results. All 10 adults concluded the study. None of the participants lost their implant during the test period indicating a good anchoring of abutments to the wide fixture tested. Stability testing was shown to vary depending on abutment length and time after surgery and with higher values for shorter abutments and increasing values over the first period of time. One patient changed the abutment from 12 to 9 mm and another from a 9 to a 12 during the year. No severe skin problems, numbness around the implant, or cosmetic problems arose. Conclusion. After 1 year of follow-up, combination of a wide fixture implant and the non-skin thinning surgical technique indicates a safe procedure with good stability and no abutment losses.

  2. Biodegradable device applied in flatfoot surgery: Comparative studies between clinical and technological aspects of removed screws

    International Nuclear Information System (INIS)

    Ruozi, Barbara; Belletti, Daniela; Manfredini, Giuseppe; Tonelli, Massimo; Sena, Paola; Vandelli, Maria Angela; Forni, Flavio; Tosi, Giovanni

    2013-01-01

    Poly-L-lactide (PLLA) is one of the most used polymers for biomedical application; its use in sutures and other implants has been widely investigated. Although the knowledge of PLLA biodegradation and biocompatibility features is deep, PLLA screws used to correct the flat foot deformity have deserved attention since they are not degraded in most of cases after a long period of years (3–7) from the implantation. In this article, a clinical and radiological evaluation (NMR, histological and clinical outcomes) on patients was correlated with physico-chemical characterization (by SEM, DSC, GPC and XRD analysis at different temperatures) on both native and patient-recovered screws together with the theoretical degradation processes of PLLA-based implants. The data demonstrated the need for crossing the biodegradation and bioabsorption of the polymer with the characteristics of both the device (geometry, structure and fabrication process) and the implantation site. Highlights: ► Resorbable PLLA screws were proposed for arthroereisis in pediatric flatfoot. ► Satisfactory clinical results were obtained almost in the totality of patients. ► The bioabsorption period is slightly longer than what is expected. ► Patient-recovered screws were analyzed to evaluate the biodegradation stage. ► Degradability/structural integrity during implantation should be ameliorated

  3. Biodegradable device applied in flatfoot surgery: Comparative studies between clinical and technological aspects of removed screws

    Energy Technology Data Exchange (ETDEWEB)

    Ruozi, Barbara, E-mail: barbara.ruozi@unimore.it [Department of Life Sciences, University of Modena and Reggio Emilia, Via Campi 183, 41100 Modena, MO (Italy); Belletti, Daniela, E-mail: daniela.belletti@unimore.it [Department of Life Sciences, University of Modena and Reggio Emilia, Via Campi 183, 41100 Modena, MO (Italy); Manfredini, Giuseppe, E-mail: giuseppe626@virgilio.it [Orthopaedic and Traumatologic Clinic, University Hospital of Modena and Reggio Emilia, Modena Italy, Director Prof. F. Catani, Via del Pozzo 71, Policlinico, 41100 Modena, MO (Italy); Tonelli, Massimo, E-mail: massimo.tonelli@unimore.it [CIGS, University of Modena and Reggio Emilia, Via Campi 213/A, 41100 Modena, MO (Italy); Sena, Paola, E-mail: paola.sena@unimore.it [Department of Biomedical, Metabolic and Neural Sciences, University of Modena and Reggio Emilia, Via del Pozzo 71, Policlinico, 41100 Modena, MO (Italy); Vandelli, Maria Angela, E-mail: mariaangela.vandelli@unimore.it [Department of Life Sciences, University of Modena and Reggio Emilia, Via Campi 183, 41100 Modena, MO (Italy); Forni, Flavio, E-mail: flavio.forni@unimore.it [Department of Life Sciences, University of Modena and Reggio Emilia, Via Campi 183, 41100 Modena, MO (Italy); Tosi, Giovanni, E-mail: giovanni.tosi@unimore.it [Department of Life Sciences, University of Modena and Reggio Emilia, Via Campi 183, 41100 Modena, MO (Italy)

    2013-04-01

    Poly-L-lactide (PLLA) is one of the most used polymers for biomedical application; its use in sutures and other implants has been widely investigated. Although the knowledge of PLLA biodegradation and biocompatibility features is deep, PLLA screws used to correct the flat foot deformity have deserved attention since they are not degraded in most of cases after a long period of years (3–7) from the implantation. In this article, a clinical and radiological evaluation (NMR, histological and clinical outcomes) on patients was correlated with physico-chemical characterization (by SEM, DSC, GPC and XRD analysis at different temperatures) on both native and patient-recovered screws together with the theoretical degradation processes of PLLA-based implants. The data demonstrated the need for crossing the biodegradation and bioabsorption of the polymer with the characteristics of both the device (geometry, structure and fabrication process) and the implantation site. Highlights: ► Resorbable PLLA screws were proposed for arthroereisis in pediatric flatfoot. ► Satisfactory clinical results were obtained almost in the totality of patients. ► The bioabsorption period is slightly longer than what is expected. ► Patient-recovered screws were analyzed to evaluate the biodegradation stage. ► Degradability/structural integrity during implantation should be ameliorated.

  4. A Potential Solution to Minimally Invasive Device for Oral Surgery: Evaluation of Surgical Outcomes in Rat

    Directory of Open Access Journals (Sweden)

    Keng-Liang Ou

    2015-01-01

    Full Text Available The objective of the present research was to investigate the thermal injury in the brain after minimally invasive electrosurgery using instruments with copper-doped diamond-like carbon (DLC-Cu surface coating. The surface morphologies of DLC-Cu thin films were characterized using scanning electron microscopy and atomic force microscopy. Three-dimensional brain models were reconstructed using magnetic resonance imaging to simulate the electrosurgical operation. In adult rats, a monopolar electrosurgical instrument coated with the DLC-Cu thin film was used to generate lesions in the brain. Animals were sacrificed for evaluations on postoperative days 0, 2, 7, and 28. Data indicated that the temperature decreased significantly when minimally invasive electrosurgical instruments with nanostructure DLC-Cu thin films were used and continued to decrease with increasing film thickness. On the other hand, the DLC-Cu-treated device created a relatively small thermal injury area and lateral thermal effect in the brain tissues. These results indicated that the DLC-Cu thin film minimized excessive thermal injury and uniformly distributed the temperature in the brain. Taken together, our study results suggest that the DLC-Cu film on copper electrode substrates is an effective means for improving the performance of electrosurgical instruments.

  5. Effects of cell-saving devices and filters on transfusion in cardiac surgery: a multicenter randomized study.

    Science.gov (United States)

    Vermeijden, Wytze J; van Klarenbosch, Jan; Gu, Y John; Mariani, Massimo A; Buhre, Wolfgang F; Scheeren, Thomas W L; Hagenaars, Johanna A M; Tan, M Erwin S H; Haenen, Jo S E; Bras, Leo; van Oeveren, Wim; van den Heuvel, Edwin R; de Vries, Adrianus J

    2015-01-01

    Cell-saving devices (CS) are frequently used in cardiac surgery to reduce transfusion requirements, but convincing evidence from randomized clinical trials is missing. Filtration of salvaged blood in combination with the CS is widely used to improve the quality of retransfused blood, but there are no data to justify this approach. To determine the contribution of CS and filters on transfusion requirements, we performed a multicenter factorial randomized clinical trial in two academic and four nonacademic hospitals. Patients undergoing elective coronary, valve, or combined surgical procedures were included. The primary end point was the number of allogeneic blood products transfused in each group during hospital admission. From 738 included patients, 716 patients completed the study (CS+filter, 175; CS, 189; filter, 175; neither CS nor filter, 177). There was no significant effect of CS or filter on the total number of blood products (fraction [95% confidence interval]: CS, 0.96 [0.79, 1.18]; filter, 1.17 [0.96, 1.43]). Use of a CS significantly reduced red blood cell transfusions within 24 hours (0.75 [0.61,0.92]), but not during hospital stay (0.86 [0.71, 1.05]). Use of a CS was significantly associated with increased transfusions of fresh frozen plasma (1.39 [1.04, 1.86]), but not with platelets (1.25 [0.93, 1.68]). Use of a CS significantly reduced the percentage of patients who received any transfusion (odds ratio [95% confidence interval]: 0.67 [0.49, 0.91]), whereas filters did not (0.92 [0.68, 1.25]). Use of a CS, with or without a filter, does not reduce the total number of allogeneic blood products, but reduces the percentage of patients who need blood products during cardiac surgery. Copyright © 2015 The Society of Thoracic Surgeons. Published by Elsevier Inc. All rights reserved.

  6. Novel device for tissue cooling during endoscopic laryngeal laser surgery: thermal damage study in an ex vivo calf model.

    Science.gov (United States)

    Koo, Hae Jin; Burns, James A; Kobler, James B; Heaton, James T; Zeitels, Steven M

    2012-07-01

    Minimizing collateral thermal damage during endoscopic laryngeal laser surgery remains a priority, and tissue cooling is one way to achieve this goal. Cooling systems utilizing compressed air have been shown to reduce the extent of thermal trauma on the vocal folds, but these units are not ideal for endoscopic applications because cooling is inefficient at the low airflows needed. We examined whether a novel vortex cooling device that generates cooled air at low flow rates would provide a cooling benefit beyond that which could be obtained by using room-temperature air for cooling tissue or by using no cooling during simulated laryngeal laser surgery. A continuous-wave thulium laser was used to incise glottic tissue in 12 calf vocal folds. Cooling was achieved with a prototype vortex cooler (9 degrees C air output; flow rate, 3 L/min), and tissue temperature measurements were compared to those with room-air cooling and no cooling. Thermal damage was analyzed histologically by measuring the depth of lactate dehydrogenase inactivation surrounding the mucosal incision. The cooling conditions were tested during time-constant cuts (8 seconds) and depth-constant cuts (into the thyroarytenoid muscle). During time-constant cuts, comparison between vortex cooling and room-air cooling revealed that vortex cooling resulted in a thermal damage zone that was 14% smaller (519 versus 603 microm; p cooling created a thermal damage zone that was 32% smaller than that created with no cooling (p cooling (p cooling reduces thermal damage more effectively than room-air cooling or no cooling during both time-constant and depth-constant thulium laser cuts.

  7. Integrated and miniaturized endoscopic devices for use during high power infrared fiber laser surgery

    Science.gov (United States)

    Wilson, Christopher Ryan

    rates comparable to those of the 100-mum-core traditional fiber used in TFL lithotripsy while providing an additional safety feature for initial fiber insertion through the ureteroscope working channel. Working channel flow rates were explored in regards to diameter and geometry. Illumination sources and configurations were explored in regards to optimized wavelength selection as well as physical geometry of the ureteroscope tip. Ureteroscope designs were devised, modeled, fabricated, and tested, implementing a reduced working channel, and optimized illumination geometry, culminating in an integrated, miniaturized ureteroscope for use in TFL lithotripsy. This final device, coupled with the proven TFL and optimized laser parameters may establish the TFL as a viable replacement to the conventional Ho:YAG laser for treatment of kidney stones.

  8. Panel 3

    OpenAIRE

    Lin, Jizhen; Hafren, Lena; Kerschner, Joseph; Li, Jian-Dong; Brown, Steve; Zheng, Qing Y.; Preciado, Diego; Nakamura, Yoshihisa; Huang, Qiuhong; Zhang, Yan

    2017-01-01

    Objective. The objective is to perform a comprehensive review of the literature up to 2015 on the genetics and precision medicine relevant to otitis media. Data Sources. PubMed database of the National Library of Medicine. Review Methods. Two subpanels were formed comprising experts in the genetics and precision medicine of otitis media. Each of the panels reviewed the literature in their respective fields and wrote draft reviews. The reviews were shared with all panel members, and a merged d...

  9. Panel Session

    DEFF Research Database (Denmark)

    Bertelsen, Olav Wedege

    2004-01-01

    In this panel session, four researchers will discuss the role of a theoretical foundation, in particular AT, in the design of information technology based artefacts. The general discussion will take of from a specific examination of the ActAD approach.......In this panel session, four researchers will discuss the role of a theoretical foundation, in particular AT, in the design of information technology based artefacts. The general discussion will take of from a specific examination of the ActAD approach....

  10. Comparison of i-gel™ supraglottic device with classic laryngeal mask airway in anesthetized paralyzed children undergoing elective surgery.

    Science.gov (United States)

    Das, Bikramjit; Mitra, Subhro; Samanta, Arijit; Vijay, Bhavani S

    2012-01-01

    The newest variation of the i-gel supraglottic airway is a pediatric version. This study was designed to investigate the usefulness of the size 2 i-gel compared with the classic laryngeal mask airway (cLMA) of the same size in anesthetized, paralyzed children. A prospective, randomized, single-blinded study was conducted in tertiary care teaching hospital. Sixty ASA grade I-II patients undergoing lower abdominal, inguinal, and orthopedic surgery were included in this prospective study. The patients were randomly assigned to i-gel and cLMA groups (30 patients in each group). Size 2 supraglottic airway was inserted according to the assigned group. We assessed ease of insertion, hemodynamic data, oropharyngeal sealing pressure, and postoperative complications. Parametric data were analyzed with the unpaired t-test and non-parametric data were analyzed with the Chi-square test. Unless otherwise stated, data are presented as mean (SD). Significance was taken as P airway leak pressure of the i-gel group (26.1 ± 2.4 cm H2O) was significantly higher than that of the cLMA group (22.64 ± 2.2 cm H2O). The success rates for first attempt of insertion were similar among the two devices. There were no differences in the incidence of postoperative airway morbidity among the two groups. Hemodynamic parameters, ease of insertion, and postoperative complications were comparable between the i-gel and cLMA groups, but airway sealing pressure was significantly higher in i-gel group.

  11. Hepatitis Panel

    Science.gov (United States)

    ... others, the virus can cause long-term, chronic liver disease . Hepatitis C is most often spread by contact with infected ... contact with an infected person. Many people with hepatitis C develop chronic liver disease and cirrhosis . A hepatitis panel includes tests for ...

  12. 21 CFR 801.60 - Principal display panel.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Principal display panel. 801.60 Section 801.60... panel. The term principal display panel, as it applies to over-the-counter devices in package form and..., or examined under customary conditions of display for retail sale. The principal display panel shall...

  13. Thermal Analysis of Solar Panels

    Science.gov (United States)

    Barth, Nicolas; de Correia, João Pedro Magalhães; Ahzi, Saïd; Khaleel, Mohammad Ahmed

    In this work, we propose to analyze the thermal behavior of PV panels using finite element simulations (FEM). We applied this analysis to compute the temperature distribution in a PV panel BP 350 subjected to different atmospheric conditions. This analysis takes into account existing formulations in the literature and, based on NOCT conditions, meteorological data was used to validate our approach for different wind speed and solar irradiance. The electrical performance of the PV panel was also studied. The proposed 2D FEM analysis is applied to different region's climates and was also used to consider the role of thermal inertia on the optimization of the PV device efficiency.

  14. Analysis of 3-panel and 4-panel microscale ionization sources

    International Nuclear Information System (INIS)

    Natarajan, Srividya; Parker, Charles B.; Glass, Jeffrey T.; Piascik, Jeffrey R.; Gilchrist, Kristin H.; Stoner, Brian R.

    2010-01-01

    Two designs of a microscale electron ionization (EI) source are analyzed herein: a 3-panel design and a 4-panel design. Devices were fabricated using microelectromechanical systems technology. Field emission from carbon nanotube provided the electrons for the EI source. Ion currents were measured for helium, nitrogen, and xenon at pressures ranging from 10 -4 to 0.1 Torr. A comparison of the performance of both designs is presented. The 4-panel microion source showed a 10x improvement in performance compared to the 3-panel device. An analysis of the various factors affecting the performance of the microion sources is also presented. SIMION, an electron and ion optics software, was coupled with experimental measurements to analyze the ion current results. The electron current contributing to ionization and the ion collection efficiency are believed to be the primary factors responsible for the higher efficiency of the 4-panel microion source. Other improvements in device design that could lead to higher ion source efficiency in the future are also discussed. These microscale ion sources are expected to find application as stand alone ion sources as well as in miniature mass spectrometers.

  15. Influence of panel reactive antibodies (PRA) on perioperative course in patients undergoing elective cardiac surgery procedures, and impact of these procedures on PRA occurrence.

    Science.gov (United States)

    Zakliczyński, Michał; Pyka, Lukasz; Trybunia, Dominika; Krynicka, Anna; Wilczek, Piotr; Maruszewski, Marcin; Nadziakiewicz, Paweł; Herdyńska-Was, Mirosława; Przybylski, Roman; Zembala, Marian

    2006-01-01

    Cardiac surgery is supposed to be a risk factor of PRA formation, however the role of PRA presence in non-transplant subjects is not known. Aim of the study was to assess PRA occurrence in patients undergoing elective cardiosurgery procedures and to evaluate its influence on the perioperative course. Blood samples were obtained before operation in 44 subjects (36M/8F; 55.9 +/- 8.1 y/o) undergoing primary elective cardiosurgery procedures--CABG (n = 30), CABG + valve (n = 2) or valve procedure (n = 12). PRA results were obtained after the discharge, and patients were retrospectively divided into: Group A (n = 18) with PRA > 1%, and Group B (n = 26) with PRA. PRA screening was repeated 3 months after the procedure in 41 subjects. They were divided into Group I (n = 13) with PRA > 1%, and Group II (n = 28) with PRA PRA titers was observed in 10 subjects (3 pts. /17% from Group A, and 7 pts. /27% from Group B), exceeding 10% in 2 females after valve replacement. 6 months after procedure, detectable PRA was still observed in 7 patients. Cardiac surgery is not a strong causative factor of PRA formation. The presence of perceptible PRA level may be associated with increased incidence of complications and consequently prolonged in-hospital stay. Influence of PRA on peri-operative course is not dependent on the source of its increased level.

  16. State of the art of robotic surgery related to vision: brain and eye applications of newly available devices

    Science.gov (United States)

    Nuzzi, Raffaele

    2018-01-01

    Background Robot-assisted surgery has revolutionized many surgical subspecialties, mainly where procedures have to be performed in confined, difficult to visualize spaces. Despite advances in general surgery and neurosurgery, in vivo application of robotics to ocular surgery is still in its infancy, owing to the particular complexities of microsurgery. The use of robotic assistance and feedback guidance on surgical maneuvers could improve the technical performance of expert surgeons during the initial phase of the learning curve. Evidence acquisition We analyzed the advantages and disadvantages of surgical robots, as well as the present applications and future outlook of robotics in neurosurgery in brain areas related to vision and ophthalmology. Discussion Limitations to robotic assistance remain, that need to be overcome before it can be more widely applied in ocular surgery. Conclusion There is heightened interest in studies documenting computerized systems that filter out hand tremor and optimize speed of movement, control of force, and direction and range of movement. Further research is still needed to validate robot-assisted procedures. PMID:29440943

  17. Left Ventricular Assist Device and Bariatric Surgery: A Bridge to Heart Transplant by Weight and Waiting Time Reduction.

    Science.gov (United States)

    Jeng, Eric I; Aranda, Juan M; Ahmed, Mustafa; Klodell, Charles T

    2016-02-01

    Obesity poses significant challenges in advanced heart failure patients who otherwise meet criteria for listing for heart transplant. We present a patient who underwent bariatric surgery while on LVAD support that subsequently lost weight and was successfully bridged to heart transplantation. © 2016 Wiley Periodicals, Inc.

  18. Safety and Effectiveness of SAF-R, a Novel Patient Positioning Device for Robot-Assisted Pelvic Surgery in Trendelenburg Position.

    Science.gov (United States)

    Talab, Saman S; Elmi, Azadeh; Sarma, Jaydev; Barrisford, Glen W; Tabatabaei, Shahin

    2016-03-01

    We found current robotic positioning devices to be inadequate and cumbersome. Furthermore, we realized there were no premarket well-designed studies to prove their safety and efficacy. In this prospective pilot study, we aimed to investigate the safety and effectiveness of a novel patient-positioning device (SAF-R) to secure the patient in Trendelenburg (T-burg) position for robot-assisted pelvic surgery. Sixteen patients undergoing robot-assisted pelvic operation in T-burg position were enrolled. Patients were positioned using SAF-R board. Pressure sensor mats were used for real-time monitoring of the contact pressures and contact area on the shoulders and calves throughout the surgery. Data collection included patients' body mass index (BMI), time needed for positioning, total time in the T-burg position, contact pressure and contact area readings from the sensor mats, and the patient shifting distance on the table. Patients were also followed for 1-month postoperatively for any position-related adverse event. The median age of the patients was 56.5 years with median BMI of 27.3. The median positioning time was 6 minutes, duration of T-burg position was 3.5 hours, and patient shift on the table was 1 cm. The contact pressure over the shoulders was in the safe range (surgery in all cases (right: 13.12 ± 1.12 vs 20.25 ± 1.56 mm Hg, left: 12.84 ± 1.05 vs 19.60 ± 1.09 mm Hg, p = 0.001). The changes in the mean contact pressure over the calves and the mean contact area for the shoulders and calves during the T-burg position were not significantly different. No significant position-related complication was detected during follow-up. SAF-R surgical board is a safe, reliable, and timesaving positioning device for patients undergoing robotic pelvic surgery in the T-burg position.

  19. Modified Descemet’s Stripping Automated Endothelial Keratoplasty: The Use of Ophthalmic Viscoelastic Devices in Hypotonic Eyes That Had Undergone Glaucoma Filtering Surgeries

    Directory of Open Access Journals (Sweden)

    Itaru Oyakawa

    2018-01-01

    Full Text Available Purpose. Descemet’s stripping automated endothelial keratoplasty (DSAEK is more difficult in hypotonic eyes with filtering bleb, due to the difficulties in elevating the intraocular pressure (IOP. We report a new method that uses ophthalmic viscoelastic devices (OVDs to achieve good graft adhesion. Case Presentation. We performed modified DSAEK surgery on 2 eyes of 2 patients, who had previously undergone a trabeculectomy. Both eyes had functioning filtering blebs; the IOP was lower than 10 mmHg without medication. After the graft was inserted into the anterior chamber, the conjunctiva was penetrated, apart from the bleb, using a 30 G needle, and Healon V® was injected into the bleb until the encapsulated space was filled completely. Air was subsequently injected into the anterior chamber to promote the graft attachment to the back surface of the cornea. The IOP was elevated above 40 mmHg in both eyes 1 h after surgery and then decreased to less than 30 mmHg over the subsequent 3 h period. The implanted graft showed good adhesion and no dislocation. Conclusions. Our novel DSAEK procedure that adds one step of OVD injection into the filtering bleb may be useful for hypotonic eyes that had undergone filtering surgeries.

  20. Structural noise from automatic exposure control device and its relationship to X-ray tube voltage used for calibration of a flat-panel detector system.

    Science.gov (United States)

    Mizuta, Masayoshi; Akazawa, Hiroyuki; Kasai, Toshifumi; Sanada, Shigeru; Abe, Shuji; Mitou, Shigeki

    2012-01-01

    In flat-panel detector (FPD) systems, the ion-chamber dosimeters used for automatic exposure control (AEC), which are placed between the detector and the source, should not affect clinical images because of FPD gain correction, but can sometimes still introduce fixed-pattern noise. In this study, we investigated whether such artifacts were caused by structural noise from the AEC detector on the basis of the noise power spectrum (NPS) and the mean square error (MSE) of FPD images taken at various tube voltages either with or without the AEC detector. When the NPS was measured without the AEC detector, the NPS did not increase in the low special-frequency band at all radiation qualities tested, irrespective of X-ray calibration tube voltages. However, when the NPS was measured while the AEC detector was used, the NPS increased in the low special-frequency band at all radiation qualities when the X-ray calibration tube voltages were at low levels. Similarly, the MSE increased when the X-ray calibration tube voltages were at low levels. From these results, artifacts in the AEC detector appear to be suppressed when a radiation quality of approximately 90 kV is used at four different standardized radiations quality (RQA3, RQA5, RQA7, and RQA9).

  1. Circuits in the Sun: Solar Panel Physics

    Science.gov (United States)

    Gfroerer, Tim

    2013-01-01

    Typical commercial solar panels consist of approximately 60 individual photovoltaic cells connected in series. Since the usual Kirchhoff rules apply, the current is uniform throughout the circuit, while the electric potential of the individual devices is cumulative. Hence, a solar panel is a good analog of a simple resistive series circuit, except…

  2. Panel discussion

    Energy Technology Data Exchange (ETDEWEB)

    No Author Given

    1975-01-01

    Panel discussion: summation and future projections. Introductory remarks by panelists followed by questions and comments from the floor. Panelists: Dr. Joseph Barnea (former director of Resources and Transport for the United Nations; energy consultant to the United Nations Institute for Training and Research (UNITAR)); the Honorable Clyde F. Bel, Jr. (member of the Louisiana House of Representatives representing District 90 and New Orleans); Dr. David Lombard (acting chief of the Advanced Systems Branch of the Division of Geothermal Energy Research and Technology, Energy Research and Development Administration (ERDA)); Fred C. Repper (vice-president of Central Power and Light Company in Corpus Christi, Texas); Dr. Hans Suter (environmental consultant in Corpus Christi, Texas; environmental columnist for the Corpus Christi Caller Times). Session chairman: Herbert Woodson.

  3. Adjacent segment pathology following cervical motion-sparing procedures or devices compared with fusion surgery: a systematic review.

    Science.gov (United States)

    Harrod, Christopher Chambliss; Hilibrand, Alan S; Fischer, Dena J; Skelly, Andrea C

    2012-10-15

    A systematic review. To critically review and summarize the literature comparing motion preservation devices to fusion in the cervical spine to determine whether the use of these devices decreases the development of radiographical (RASP) or clinical adjacent segment pathology (CASP) compared with fusion. Historically, surgical treatment of symptomatic cervical disc disease presenting as radiculopathy and/or myelopathy with anterior cervical decompression and fusion has yielded excellent results. Controversy remains whether RASP and CASP requiring treatment is due to fusion-altered biomechanics and kinematics versus natural history. We conducted a systematic search in MEDLINE and the Cochrane Collaboration Library for literature published through February 2012 on human randomized control trials or cohort studies published in the English language containing abstracts to answer the following key questions: (1) Is there evidence that total disc replacement (TDR) is associated with a lower risk of RASP or CASP compared with fusion? (2) Is there evidence that other procedures that do not involve arthrodesis or other motion-sparing devices are associated with a lower risk of RASP or CASP compared with fusion? (3)Is one type of motion preservation device or procedure associated with a lower risk of RASP or CASP compared with others? The initial literature search yielded 276 citations, of which 73 unique, potentially relevant citations that were evaluated against the inclusion/exclusion criteria set a priori. A total of 14 studies were selected for inclusion. For question 1, RASP was variably reported in studies that compared total disc replacement (TDR) to anterior cervical decompression and fusion (ACDF), and risk differences for reoperation due to CASP ranged from 1.0% to 4.8%, with no statistically significant differences between groups. For question 2, no studies comparing motion preservation devices to ACDF met our inclusion criteria. For question 3, one study

  4. Combined Laser-Doppler Flowmetry and Spectrophotometry: Feasibility Study of a Novel Device for Monitoring Local Cortical Microcirculation during Aneurysm Surgery.

    Science.gov (United States)

    Sommer, Björn; Kreuzer, Maximilian; Bischoff, Barbara; Wolf, Dennis; Schmitt, Hubert; Eyupoglu, Ilker Y; Rössler, Karl; Buchfelder, Michael; Ganslandt, Oliver; Wiendieck, Kurt

    2017-01-01

    Background  Monitoring of cortical cerebral perfusion is essential, especially in neurovascular surgery. Study Aims  To test a novel noninvasive laser-Doppler flowmetry and spectrophotometry device for feasibility during elective cerebral aneurysm surgery. Material and Methods  In this prospective single-institution nonrandomized trial, we studied local cerebral microcirculation using the noninvasive laser-Doppler spectrophotometer "Oxygen-to-see" (O2C) in 20 consecutive patients (15 female, 5 male; median age: 60.5 ± 11.7 years) who were operated on for incidental cerebral aneurysms. Capillary-venous oxygenation (oxygen saturation ["SO 2 "]), postcapillary venous filling pressures (relative hemoglobin content ["rHb"]), blood cell velocity ("velo"), and blood flow ("flow") were measured in 7-mm tissue depth using a subdural fiberoptic probe. Results  Representative recordings were acquired immediately after dural opening over a median time span of 88 ± 21.8 seconds (range: 60-128 seconds) before surgical manipulation. Baseline values (median ± 2 standard deviations) of brain perfusion as measured with the O2C device were SO 2 , 39 ± 16.6%; rHb, 53 ± 18.6 arbitrary units (AU); velo, 60 ± 20.4 AU; and flow, 311 ± 72.8 AU. Placement of the self-retaining retractor led to a decrease in SO 2 of 17% ± 29% ( p  < .05) and flow of 10% ± 11% ( p  < .01); rHb increased by 18% ± 20% ( p  < .01), and velo remained unchanged. Retractor removal caused the opposite with an increased flow of 10% ± 7% ( p  < 0.001) and velo (3% ± 6%, p  = 0.11), but a decrease in SO 2 of 24% ± 33% ( p  = 0.09) and rHb of 12% ± 20% ( p =0.18). No neurologic or surgical complications occurred. Conclusion  Using this novel noninvasive system, we were able to measure local cerebral microcirculation during aneurysm surgery. Our data indicate that this device is able to detect changes during routine

  5. Design Engineering in Surgery. How to Design, Test and Market Surgical Devices Made With 3D Printing?

    Science.gov (United States)

    Rodríguez García, José Ignacio; Sierra Velasco, José Manuel; Villazón Suárez, Marta; Cabrera Pereira, Ana; Sosa, Valentina; Cortizo Rodríguez, José Luis

    2018-04-01

    Industry 4.0 offers new development opportunities for surgeons. Computer-aided design and 3D printing allow for the creation of prototypes and functional end products. Until now, it was difficult for new devices to get to the manufacturing phase. Nowadays, the main limitations are our creativity, available spaces to test our creations and obtaining financing. Copyright © 2018 AEC. Publicado por Elsevier España, S.L.U. All rights reserved.

  6. Ultrasonic scanner for radial and flat panels

    Science.gov (United States)

    Spencer, R. L.; Hill, E. K. (Inventor)

    1973-01-01

    An ultrasonic scanning mechanism is described that scans panels of honeycomb construction or with welded seams. It incorporates a device which by simple adjustment is adapted to scan either a flat panel or a radial panel. The supporting structure takes the form of a pair of spaced rails. An immersion tank is positioned between the rails and below their level. A work holder is mounted in the tank and is adapted to hold the flat or radial panel. A traveling bridge is movable along the rails and a carriage is mounted on the bridge.

  7. Intravenous sufentanil and morphine for post-cardiac surgery pain relief using patient-controlled analgesia (pca) device: a randomized double-blind clinical trial

    International Nuclear Information System (INIS)

    Alavi, S.M.; Kish, R.F.; Farsad, F.; Imani, F.; Sheikhvatan, M.

    2010-01-01

    Selection of the best analgesic technique in patients undergoing major surgeries can result in lower morbidity and satisfactory postoperative pain relief. In the present study, we tried to compare the effect of morphine and sufentanil on postoperative pain severity and hemodynamic changes by using patient-controlled analgesia (PCA) device in patients who were candidate for coronary artery bypass surgery (CABG). It was a randomized double-blinded clinical trial in which 120 patients aged 30-65 years, ASA physical status I-III, candidate for CABG in Shahid Rajaee hospital in Tehran were included. Before anesthesia, patients were randomly assigned to one of three groups to receive sufentanil (n=40), morphine (n=40) or normal saline (n=40). After tracheal extubation at intensive care unit, PCA was started by, sufentanil 4mg for the first group, morphine 2mg for the second group and normal saline, at same volume for the third group, intravenously with 10 minute lockout interval. Postoperative pain was evaluated by VAS scale, 1, 6, 12, 18 and 24 hours after extubation and systolic blood pressure, arterial oxygen saturation, PCO2 and PO2 were recorded 24 hours after extubation. VAS scores at rest revealed significantly less pain for patients in sufentanil and morphine groups than normal saline group, throughout the twenty-four hours after operation (P<0.001). However, there were no significant differences in the means of VAS scores between sufentanil and morphine groups. Among studied hemodynamic parameters, only systolic blood pressure was reduced more in morphine than sufentanil group (P<0.001). After CABG surgery, administration of intravenous sufentanil and morphine using PCA can lead to similar reduction of postoperative pain severity. (author)

  8. PLASTIC SURGERY

    African Journals Online (AJOL)

    surgery or subcutaneous mastectomy utilizing a periareolar or circumareolar ... old. Informed consent was obtained. The height of the patients was measured from heel to vertex with a standard height measuring device. The chest circumference was ... The procedure was followed with liposuction 3-6 months later if required.

  9. The role of embolic protection devices during carotid stenting prior to cardiac surgery in asymptomatic patients: empty filters?

    Science.gov (United States)

    Van der Heyden, Jan; Wolters, Frank J; Garin, Nathalie; Blant, Snezana Andrejevic; Inglin, Marc; Bal, E T; Suttorp, Jan-Maarten

    2012-07-01

    The purpose of this study was to analyze the debris captured in the distal protection filters used during carotid artery stenting (CAS). CAS is an option available to high-risk patients requiring revascularization. Filters are suggested for optimal stroke prevention during CAS. From May 2005 to June 2007, filters from 59 asymptomatic patients who underwent CAS were collected and sent to a specialized laboratory for light-microscope and histological analysis. Peri- and postprocedural outcomes were assessed during 1-year follow-up. On the basis of biomedical imaging of the filter debris, the captured material could not be identified as embolized particles from the carotid plaque. On histological analysis the debris consisted mainly of red blood cell aggregates and/ or platelets, occasionally accompanied by granulocytes. We found no consistent histological evidence of embolized particles originating from atherosclerotic plaques. Post-procedure, three neurological events were reported: two (3.4%) transient ischemic attacks (TIA) and one (1.7%) ipsilateral minor stroke. The filters used during CAS in asymptomatic patients planned for cardiac surgery often remained empty. These findings may be explained by assuming that asymptomatic patients feature a different atherosclerotic plaque composition or stabilization through antiplatelet medication. Larger, randomized trials are clearly warranted, especially in the asymptomatic population. Copyright © 2011 Wiley Periodicals, Inc.

  10. Intraoperative burn from a grounding pad of electrosurgical device during breast surgery: A CARE-compliant case report.

    Science.gov (United States)

    Bae, Hahn-Sol; Lee, Mu-Young; Park, Ji-Ung

    2018-01-01

    Burns at the site of the return electrode (i.e., grounding pad) are possible effects of electrosurgery. Despite this knowledge, however, ignorance or negligence with regards to proper handling of the grounding pads still often occurs. Burn injuries can be easily prevented by taking the necessary precautions; thus, during plastic surgery, careful attention should to be paid. A 38-year-old female patient was admitted to our ward to be performed augmentation mammoplasty. Before the start of the procedure, the grounding pad was placed on the surgical table and the left calf of the patient was placed on the grounding pad. Before using the endoscope, we found a burn on patient's left calf, where the grounding pad had been placed. It was a 3-cm-by-3-cm-sized full thickness burn. The surrounding areas had no painful sensation with noninfectious sign. Debridement and direct closure was performed with elliptical incision of eschar. The patient did not require additional surgical procedure anymore and satisfied with the scar. Through this case, we present the appropriate management of electrical burns from a grounding pad, and emphasize the understanding of the mechanism of burn because of electrosurgery, and how to use the grounding pad optimally to minimize the patient's risk. Copyright © 2017 The Authors. Published by Wolters Kluwer Health, Inc. All rights reserved.

  11. Performance comparison between silicon solar panel and dye-sensitized solar panel in Malaysia

    Science.gov (United States)

    Hamed, N. K. A.; Ahmad, M. K.; Urus, N. S. T.; Mohamad, F.; Nafarizal, N.; Ahmad, N.; Soon, C. F.; Ameruddin, A. S.; Faridah, A. B.; Shimomura, M.; Murakami, K.

    2017-09-01

    In carrying out experimental research in performance between silicon solar panel and dye-sensitive solar panel, we have been developing a device and a system. This system has been developed consisting of controllers, hardware and software. This system is capable to get most of the input sources. If only need to change the main circuit and coding for a different source input value. This device is able to get the ambient temperature, surface temperature, surrounding humidity, voltage with load, current with load, voltage without load and current without load and save the data into external memory. This device is able to withstand the heat and rain as it was fabricated in a waterproof box. This experiment was conducted to examine the performance of both the solar panels which are capable to maintain their stability and performance. A conclusion based on data populated, the distribution of data for dye-sensitized solar panel is much better than silicon solar panel as dye-sensitized solar panel is very sensitive to heat and not depend only on midday where is that is the maximum ambient temperature for both solar panel as silicon solar panel only can give maximum and high output only when midday.

  12. Localized environment characterization device

    KAUST Repository

    Alzain, Hashim

    2016-07-21

    Various apparatuses and methods are provided for measuring the likely environmental impact of a particular geographic location on power generation properties of potential solar installations at the particular location. In an example embodiment of one such apparatus, a measurement device is provided. The measurement device includes a base portion comprising a base frame element disposed on a plurality of supporting legs, and a top panel comprising a series of connected members and one or more measurement modules whose planar dimensions are defined by the series of connected members. The top panel is connected to the base portion by a joint such that the top panel can rotate about the joint, and a panel support element is configured to fasten the top panel immovably at a desired degree of rotation in relation to the base portion.

  13. Micro-inverter solar panel mounting

    Science.gov (United States)

    Morris, John; Gilchrist, Phillip Charles

    2016-02-02

    Processes, systems, devices, and articles of manufacture are provided. Each may include adapting micro-inverters initially configured for frame-mounting to mounting on a frameless solar panel. This securement may include using an adaptive clamp or several adaptive clamps secured to a micro-inverter or its components, and using compressive forces applied directly to the solar panel to secure the adaptive clamp and the components to the solar panel. The clamps can also include compressive spacers and safeties for managing the compressive forces exerted on the solar panels. Friction zones may also be used for managing slipping between the clamp and the solar panel during or after installation. Adjustments to the clamps may be carried out through various means and by changing the physical size of the clamps themselves.

  14. A modified device for intraoral radiography to assess the distal osseous defects of mandibular second molar after impacted third molar surgery

    Energy Technology Data Exchange (ETDEWEB)

    Ana, Faria Inocencio; Mercedes, Gallas Torreira [Faculty of Medicine and Dentistry, Santiago de Compostela University, Santiago (Spain)

    2011-09-15

    This article is to describe a modified device for intraoral radiography which was developed to obtain reproducible radiographic images for assessment of distal osseous defects of the mandibular second molar (2 Mm) after impacted third molar (3 Mm) surgery. A commercial available alignment system for posterior region was modified by adding a reference gauge pin (millimetric) and threading a hollow acrylic cylinder at the ring of the radiographic positioner to attach the X-ray collimator. The design included customized resin acrylic stent for the occlusal surface of the 2Mm in maximum intercuspal position, individualizing the biteblock positioner. Periapical radiographs were taken before and after surgical extraction of 3 Mm, employing the radiographic technique of parallelism described by Kugelberg (1986) with this modified film holder and inserting the gauge pin on the deepest bone probing depth point. This technique permitted to obtain standardized periapical radiographs with a moderate to high resolution, repeatability, and accuracy. There was no difference between the measurements on the pre- and post-operative radiographs. This technique allowed better maintenance of the same geometric position compared with conventional one. The insertion of the gauge pin provided the same reference point and localized the deepest osseous defect on the two-dimensional radiographs. This technique allowed better reproducibility in posterior radiographic records (distal surface of 2 Mm) and more accurate measurements of radiographic bone level by the use of a millimetric pin.

  15. A modified device for intraoral radiography to assess the distal osseous defects of mandibular second molar after impacted third molar surgery

    International Nuclear Information System (INIS)

    Ana, Faria Inocencio; Mercedes, Gallas Torreira

    2011-01-01

    This article is to describe a modified device for intraoral radiography which was developed to obtain reproducible radiographic images for assessment of distal osseous defects of the mandibular second molar (2 Mm) after impacted third molar (3 Mm) surgery. A commercial available alignment system for posterior region was modified by adding a reference gauge pin (millimetric) and threading a hollow acrylic cylinder at the ring of the radiographic positioner to attach the X-ray collimator. The design included customized resin acrylic stent for the occlusal surface of the 2Mm in maximum intercuspal position, individualizing the biteblock positioner. Periapical radiographs were taken before and after surgical extraction of 3 Mm, employing the radiographic technique of parallelism described by Kugelberg (1986) with this modified film holder and inserting the gauge pin on the deepest bone probing depth point. This technique permitted to obtain standardized periapical radiographs with a moderate to high resolution, repeatability, and accuracy. There was no difference between the measurements on the pre- and post-operative radiographs. This technique allowed better maintenance of the same geometric position compared with conventional one. The insertion of the gauge pin provided the same reference point and localized the deepest osseous defect on the two-dimensional radiographs. This technique allowed better reproducibility in posterior radiographic records (distal surface of 2 Mm) and more accurate measurements of radiographic bone level by the use of a millimetric pin.

  16. Circumcision Complications Associated with the Plastibell Device and Conventional Dissection Surgery: A Trial of 586 Infants of Ages up to 12 Months

    Directory of Open Access Journals (Sweden)

    Seyed Abdollah Mousavi

    2008-01-01

    Full Text Available Conventional dissection surgery (CDS or using the Plastibell device (PD is the method most frequently employed for circumcision. The aim of this study was to evaluate two methods in terms of the incidence of complications in infants of ages up to 12 months. In a prospective study, 586 infants equal to or less than 12 months were studied from 2002 to 2008, and complications between the two groups were assessed. The overall rates of complications in CDS and PD groups were 1.95% and 7.08%, respectively. In each group, the rate of complications was not different among children who had a normal weight, compared to those of a lower or upper (10% weight. There was a significant positive correlation between the age and weight of subjects within the time of ring separation (<.001. The results of this study suggest the PD method for neonates and low-weight infants with thin prepuce and the CDS for other infants.

  17. Magnetic evaluation of a solar panel using HTS-SQUID

    International Nuclear Information System (INIS)

    Kiwa, Toshihiko; Fukudome, Yohei; Miyazaki, Shingo; Saari, Mohd Mawardi; Sakai, Kenji; Tsukada, Keiji

    2013-01-01

    Highlights: •The magnetic evaluation system of a solar panel using HTS-SQUID has been developed. •The electric circuits made by the discrete devices on the circuit board were visualized. •The electric properties of the commercial solar panels were demonstrated. -- Abstract: The magnetic evaluation system of a solar panel using HTS-SQUID has been proposed and developed. A normal pick-up coil was applied to detect the tangential magnetic field to the panel surface. Since the detected field could be related to the currents of the solar panels, the electric properties of the solar panels could be evaluated. In this work, the evaluation of the electric properties of the commercial solar panels as well as the electric circuits made by the discrete devices on the circuit board was visualized

  18. Humid free efficient solar panel

    Science.gov (United States)

    Panjwani, Manoj Kumar; Panjwani, Suresh Kumar; Mangi, Fareed Hussain; Khan, Danish; Meicheng, Li

    2017-09-01

    The paper examines the impact of the humidity on the Solar panels which makes a space for the drastic variation in the power generated and makes the device less efficient. Humidity readily affects the efficiency of the solar cells and creates a minimal layer of water on its surface. It also decreases the efficiency by 10-20% of the total power output produced. Moreover, to handle this issue, all around characterized measures are required to be taken to guarantee the smooth working of the solar panels utilized in humid areas. In connection with this issue, Karachi, the biggest city of Pakistan which is located near the costal line touching Arabian Sea, was taken as a reference city to measure the humidity range. In Karachi, the average humidity lies between 25-70% (as per Pakistan Meteorological Department PMD), that indirectly leads in decreasing power acquired from a Solar Panel and develops various complexities for the solar system. The system on average experiences stability issues, such as those of power fluctuations etc., due to which, the whole solar system installed observes abnormal variations in acquired power. Silica Gel was used as a desiccant material in order to assure dryness over the solar panel. More than four experiments were conducted with the usage of water absorbent to improve the efficiency and to make system more power efficient.

  19. Hepatitis virus panel

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/article/003558.htm Hepatitis virus panel To use the sharing features on this page, please enable JavaScript. The hepatitis virus panel is a series of blood tests used ...

  20. Deep Breathing Improves End-Tidal Carbon Dioxide Monitoring of an Oxygen Nasal Cannula-Based Capnometry Device in Subjects Extubated After Abdominal Surgery.

    Science.gov (United States)

    Takaki, Shunsuke; Mizutani, Kenji; Fukuchi, Moeka; Yoshida, Tasuku; Idei, Masahumi; Matsuda, Yuko; Yamaguchi, Yoshikazu; Miyashita, Tetsuya; Nomura, Takeshi; Yamaguchi, Osamu; Goto, Takahisa

    2017-01-01

    Capnometry detects hypoventilation earlier than pulse oximetry while supplemental oxygen is being administered. We compared the end-tidal CO 2 (P ETCO 2 ) measured using a newly developed oxygen nasal cannula with a CO 2 -sampling port and the P aCO 2 in extubated subjects after abdominal surgery. We also investigated whether the difference between P aCO 2 and P ETCO 2 is affected by resting, by spontaneous breathing with the mouth consciously closed, and by deep breathing with the mouth closed. Adult post-abdominal surgery subjects admitted to the ICU were enrolled. After extubation, oxygen was supplied at 4 L/min using a capnometry-type oxygen cannula. The breathing frequency, P ETCO 2 , and P aCO 2 were measured after 30 min of oxygen supplementation. P ETCO 2 was continuously measured during rest, during breathing with the mouth consciously closed, and during deep breathing with the mouth closed. The difference between P ETCO 2 and P aCO 2 during various breathing patterns was analyzed using the Bland-Altman method. Twenty subjects were included. The bias ± SD (limits of agreement) for breathing frequency measured by capnometry compared with those obtained by direct measurement was 0.4 ± 3.6 (-6.7 to 7.4). In P ETCO 2 compared with P aCO 2 , the biases (limits of agreement) were 14.8 ± 8.2 (-1.3 to 30.9) at rest, 10.2 ± 6.4 (-2.3 to 22.7) with the mouth closed, and 7.7 ± 5.6 (-3.2 to 18.6) for deep breathing with the mouth closed. P ETCO 2 determined using the capnometry device yielded unreliable and widely ranging values under various breathing patterns. However, deep breathing with the mouth closed decreased the difference between P ETCO 2 and P aCO 2 , as compared with other breathing patterns. P ETCO 2 measurements under deep breathing with mouth closed with a capnometry-type oxygen cannula improved the prediction of the absolute value of P aCO 2 in extubated post-abdominal surgical subjects without respiratory dysfunction. Copyright © 2017 by

  1. Comprehensive metabolic panel

    Science.gov (United States)

    Metabolic panel - comprehensive; Chem-20; SMA20; Sequential multi-channel analysis with computer-20; SMAC20; Metabolic panel 20 ... Normal values for the panel tests are: Albumin : 3.4 to 5.4 g/dL (34 to 54 g/L) Alkaline phosphatase : 44 to 147 ...

  2. Semiconductor-based, large-area, flexible, electronic devices

    Science.gov (United States)

    Goyal, Amit [Knoxville, TN

    2011-03-15

    Novel articles and methods to fabricate the same resulting in flexible, large-area, triaxially textured, single-crystal or single-crystal-like, semiconductor-based, electronic devices are disclosed. Potential applications of resulting articles are in areas of photovoltaic devices, flat-panel displays, thermophotovoltaic devices, ferroelectric devices, light emitting diode devices, computer hard disc drive devices, magnetoresistance based devices, photoluminescence based devices, non-volatile memory devices, dielectric devices, thermoelectric devices and quantum dot laser devices.

  3. Evaluation of a new method of irrigation and aspiration for removal of ophthalmic viscoelastic device during cataract surgery in a porcine model.

    Science.gov (United States)

    Mitani, Arisa; Suzuki, Takashi; Tasaka, Yoshitaka; Uda, Takahiro; Hiramatsu, Yukako; Kawasaki, Shiro; Ohashi, Yuichi

    2014-11-07

    To determine if a method for irrigation and aspiration (I/A) during cataract surgery provides effective removal of ophthalmic viscoelastic device (OVD). Japanese porcine eyes were used to evaluate I/A performance with Technique 1 (the I/A tip placed on the center of the anterior surface of the IOL), Technique 2 (the I/A tip alternately pressed near the edge of the IOL optic anterior surface on one side and then the other to tilt the IOL back and forth), and Technique 3 (the I/A tip inserted behind the IOL optic, between it and the posterior capsule). Techniques 1 and 2 were compared using the Miyake-Apple posterior view video technique to visualize the flow of irrigation fluid containing triamcinolone acetonide particles behind the IOL. To check the efficacy of OVD removal from behind the IOL for of all three I/A techniques, OVD with fluorescein beads were inserted inside the lens capsule before implantation of the IOL. After each I/A technique, eyes were prepared for Miyake-Apple viewing and pictures of the lens capsule were taken using fluorescent microscopy. Residual fluorescein beads in the capsular bag were analyzed. Technique 1 resulted in a straight flow of fluid behind the IOL, while Technique 2 resulted in a vortex flow. The average amount of OVD retained inside the capsule after using Technique 2 or 3 was significantly lower than after using Technique 1 (p <0.0001). Technique 2 proved to remove more effectively fluorescein bead-labelled OVD under the IOL than Technique 1.

  4. Robotic surgery

    Science.gov (United States)

    Robot-assisted surgery; Robotic-assisted laparoscopic surgery; Laparoscopic surgery with robotic assistance ... Robotic surgery is similar to laparoscopic surgery. It can be performed through smaller cuts than open surgery. ...

  5. Novel prototype sewing device, EndoSew®, for minimally invasive surgery: an extracorporeal ileal conduit construction pilot study in 10 patients.

    Science.gov (United States)

    Roth, Beat; Birkhäuser, Frédéric D; Thalmann, George N; Zehnder, Pascal

    2013-11-01

    WHAT'S KNOWN ON THE SUBJECT? AND WHAT DOES THE STUDY ADD?: The EndoSew(®) prototype was first tested in a porcine model several years ago. The investigators found it both simple to master and reliable, its greatest advantage being a 2.4-fold time saving compared with straight laparoscopic suturing. In addition to that publication, there is a single case report describing the performance of an open EndoSew(®) suture to close parts (16 cm) of an ileal neobladder. The time for suturing the 16 cm ileum was 25 min, which is in line with our experience. The knowledge on this subject is limited to these two publications. We report on the first consecutive series of ileal conduits performed in humans using the novel prototype sewing device EndoSew(®). The study shows that the beginning and the end of the suture process represent the critical procedural steps. It also shows that, overall, the prototype sewing machine has the potential to facilitate the intracorporeal suturing required in reconstructive urology for construction of urinary diversions. To evaluate the feasibility and safety of the novel prototype sewing device EndoSew(®) in placing an extracorporeal resorbable running suture for ileal conduits. We conducted a prospective single-centre pilot study of 10 consecutive patients undergoing ileal conduit, in whom the proximal end of the ileal conduit was closed extracorporeally using an EndoSew(®) running suture. The primary endpoint was the safety of the device and the feasibility of the sewing procedure which was defined as a complete watertight running suture line accomplished by EndoSew(®) only. Watertightness was assessed using methylene blue intraoperatively and by loopography on postoperative days 7 and 14. Secondary endpoints were the time requirements and complications ≤30 days after surgery. A complete EndoSew(®) running suture was feasible in nine patients; the suture had to be abandoned in one patient because of mechanical failure. In three

  6. Paneling architectural freeform surfaces

    KAUST Repository

    Eigensatz, Michael

    2010-07-26

    The emergence of large-scale freeform shapes in architecture poses big challenges to the fabrication of such structures. A key problem is the approximation of the design surface by a union of patches, socalled panels, that can be manufactured with a selected technology at reasonable cost, while meeting the design intent and achieving the desired aesthetic quality of panel layout and surface smoothness. The production of curved panels is mostly based on molds. Since the cost of mold fabrication often dominates the panel cost, there is strong incentive to use the same mold for multiple panels. We cast the major practical requirements for architectural surface paneling, including mold reuse, into a global optimization framework that interleaves discrete and continuous optimization steps to minimize production cost while meeting user-specified quality constraints. The search space for optimization is mainly generated through controlled deviation from the design surface and tolerances on positional and normal continuity between neighboring panels. A novel 6-dimensional metric space allows us to quickly compute approximate inter-panel distances, which dramatically improves the performance of the optimization and enables the handling of complex arrangements with thousands of panels. The practical relevance of our system is demonstrated by paneling solutions for real, cutting-edge architectural freeform design projects. © 2010 ACM.

  7. Paneling architectural freeform surfaces

    KAUST Repository

    Eigensatz, Michael

    2010-07-25

    The emergence of large-scale freeform shapes in architecture poses big challenges to the fabrication of such structures. A key problem is the approximation of the design surface by a union of patches, so-called panels, that can be manufactured with a selected technology at reasonable cost, while meeting the design intent and achieving the desired aesthetic quality of panel layout and surface smoothness. The production of curved panels is mostly based on molds. Since the cost of mold fabrication often dominates the panel cost, there is strong incentive to use the same mold for multiple panels. We cast the major practical requirements for architectural surface paneling, including mold reuse, into a global optimization framework that interleaves discrete and continuous optimization steps to minimize production cost while meeting user-specified quality constraints. The search space for optimization is mainly generated through controlled deviation from the design surface and tolerances on positional and normal continuity between neighboring panels. A novel 6-dimensional metric space allows us to quickly compute approximate inter-panel distances, which dramatically improves the performance of the optimization and enables the handling of complex arrangements with thousands of panels. The practical relevance of our system is demonstrated by paneling solutions for real, cutting-edge architectural freeform design projects.

  8. Thermonuclear device

    International Nuclear Information System (INIS)

    Tezuka, Masaru.

    1993-01-01

    Protrusions and recesses are formed to a vacuum vessel and toroidal magnetic coils, and they are engaged. Since the vacuum vessel is generally supported firmly by a rack or the like by support legs, the toroidal magnetic field coils can be certainly supported against tumbling force. Then, there can be attained strong supports for the toroidal magnetic field coils, in addition to support by wedges on the side of inboard and support by share panels on the side of outboard, capable of withstanding great electromagnetic forces which may occur in large-scaled next-generation devices. That is, toroidal magnetic field coils excellent from a view point of deformation and stress can be obtained, to provide a thermonuclear device of higher reliability. (N.H.)

  9. Titanium Honeycomb Panel Testing

    Science.gov (United States)

    Richards, W. Lance; Thompson, Randolph C.

    1996-01-01

    Thermal-mechanical tests were performed on a titanium honeycomb sandwich panel to experimentally validate the hypersonic wing panel concept and compare test data with analysis. Details of the test article, test fixture development, instrumentation, and test results are presented. After extensive testing to 900 deg. F, non-destructive evaluation of the panel has not detected any significant structural degradation caused by the applied thermal-mechanical loads.

  10. Solar reflection panels

    Science.gov (United States)

    Diver, Jr., Richard B.; Grossman, James W [Albuquerque, NM; Reshetnik, Michael [Boulder, CO

    2006-07-18

    A solar collector comprising a glass mirror, and a composite panel, wherein the back of the mirror is affixed to a front surface of the composite panel. The composite panel comprises a front sheet affixed to a surface of a core material, preferably a core material comprising a honeycomb structure, and a back sheet affixed to an opposite surface of the core material. The invention may further comprise a sealing strip, preferably comprising EPDM, positioned between the glass mirror and the front surface of the composite panel. The invention also is of methods of making such solar collectors.

  11. Cosmetic Surgery

    Science.gov (United States)

    ... Body Looking and feeling your best Cosmetic surgery Cosmetic surgery Teens might have cosmetic surgery for a number ... about my body? What are the risks of cosmetic surgery? top People who have cosmetic surgery face many ...

  12. Panel 5: Microbiology and immunology panel.

    Science.gov (United States)

    Murphy, Timothy F; Chonmaitree, Tasnee; Barenkamp, Stephen; Kyd, Jennelle; Nokso-Koivisto, Johanna; Patel, Janak A; Heikkinen, Terho; Yamanaka, Noboru; Ogra, Pearay; Swords, W Edward; Sih, Tania; Pettigrew, Melinda M

    2013-04-01

    The objective is to perform a comprehensive review of the literature from January 2007 through June 2011 on the virology, bacteriology, and immunology related to otitis media. PubMed database of the National Library of Medicine. Three subpanels with co-chairs comprising experts in the virology, bacteriology, and immunology of otitis media were formed. Each of the panels reviewed the literature in their respective fields and wrote draft reviews. The reviews were shared with all panel members, and a second draft was created. The entire panel met at the 10th International Symposium on Recent Advances in Otitis Media in June 2011 and discussed the review and refined the content further. A final draft was created, circulated, and approved by the panel. Excellent progress has been made in the past 4 years in advancing an understanding of the microbiology and immunology of otitis media. Advances include laboratory-based basic studies, cell-based assays, work in animal models, and clinical studies. The advances of the past 4 years formed the basis of a series of short-term and long-term research goals in an effort to guide the field. Accomplishing these goals will provide opportunities for the development of novel interventions, including new ways to better treat and prevent otitis media.

  13. Panel 5: Microbiology and Immunology Panel

    Science.gov (United States)

    Murphy, Timothy F.; Chonmaitree, Tasnee; Barenkamp, Stephen; Kyd, Jennelle; Nokso-Koivisto, Johanna; Patel, Janak A.; Heikkinen, Terho; Yamanaka, Noboru; Ogra, Pearay; Swords, W. Edward; Sih, Tania; Pettigrew, Melinda M.

    2014-01-01

    Objective The objective is to perform a comprehensive review of the literature from January 2007 through June 2011 on the virology, bacteriology, and immunology related to otitis media. Data Sources PubMed database of the National Library of Medicine. Review Methods Three subpanels with co-chairs comprising experts in the virology, bacteriology, and immunology of otitis media were formed. Each of the panels reviewed the literature in their respective fields and wrote draft reviews. The reviews were shared with all panel members, and a second draft was created. The entire panel met at the 10th International Symposium on Recent Advances in Otitis Media in June 2011 and discussed the review and refined the content further. A final draft was created, circulated, and approved by the panel. Conclusion Excellent progress has been made in the past 4 years in advancing an understanding of the microbiology and immunology of otitis media. Advances include laboratory-based basic studies, cell-based assays, work in animal models, and clinical studies. Implications for Practice The advances of the past 4 years formed the basis of a series of short-term and long-term research goals in an effort to guide the field. Accomplishing these goals will provide opportunities for the development of novel interventions, including new ways to better treat and prevent otitis media. PMID:23536533

  14. Puncture panel optimization

    International Nuclear Information System (INIS)

    Glass, R.E.; Longenbaugh, R.S.

    1986-01-01

    Sandia National Laboratories developed the TRansUranic PACkage Transporter (TRUPACT) to transport defense contact-handled transuranic wastes. The package has been designed to meet the normal and hypothetical accident conditions in 10CFR71 which includes the demonstrated ability to survive a 1-meter drop onto a mild steel pin. The puncture protection is provided by puncture resistant panels. In conjunction with the development of TRUPACT, a series of experiments has been conducted to reduce the weight of the puncture resistant panels. The initial scoping tests resulted in a preliminary design incorporating 30 layers of Kevlar. This design has been shown to meet the regulatory puncture test. To reduce the weight of this panel, subscale tests were conducted on panels utilizing Kevlar yarns with varying mass per unit length (denier) as well as different resins. This paper reviews the testing undertaken in the original panel development and discusses the results obtained from the recent subscale and full-scale optimization tests

  15. Solar panel cleaning robot

    Science.gov (United States)

    Nalladhimmu, Pavan Kumar Reddy; Priyadarshini, S.

    2018-04-01

    As the demand of electricity is increasing, there is need to using the renewable sources to produce the energy at present of power shortage, the use of solar energy could be beneficial to great extent and easy to get the maximum efficiency. There is an urgent in improving the efficiency of solar power generation. Current solar panels setups take a major power loss when unwanted obstructions cover the surface of the panels. To make solar energy more efficiency of solar array systems must be maximized efficiency evaluation of PV panels, that has been discussed with particular attention to the presence of dust on the efficiency of the PV panels have been highlighted. This paper gives the how the solar panel cleaning system works and designing of the cleaning system.

  16. Innovations in Bariatric Surgery.

    Science.gov (United States)

    Zhu, Catherine; Pryor, Aurora D

    2015-11-01

    Surgery has consistently been demonstrated to be the most effective long-term therapy for the treatment of obesity. However, despite excellent outcomes with current procedures, most patients with obesity- and weight-related comorbidities who meet criteria for surgical treatment choose not to pursue surgery out of fear of operative risks and complications or concerns about high costs. Novel minimally invasive procedures and devices may offer alternative solutions for patients who are hesitant to pursue standard surgical approaches. These procedures may be used for primary treatment of obesity, early intervention for patients approaching morbid obesity, temporary management prior to bariatric surgery, or revision of bypass surgery associated with weight regain. Novel bariatric procedures can in general be divided into four categories: endoluminal space-occupying devices, gastric suturing and restrictive devices, absorption-limiting devices, and neural-hormonal modulating devices. Many of these are only approved as short-term interventions, but these devices may be effective for patients desiring low-risk procedures or a transient effect. We will see the expansion of indications and alternatives for metabolic surgery as these techniques gain approval.

  17. Make Your Own Solar Panel.

    Science.gov (United States)

    Suzuki, David

    1992-01-01

    Presents an activity in which students make a simulated solar panel to learn about the principles behind energy production using solar panels. Provides information about how solar panels function to produce energy. (MCO)

  18. Panel 4: Report of the Microbiology Panel.

    Science.gov (United States)

    Barenkamp, Stephen J; Chonmaitree, Tasnee; Hakansson, Anders P; Heikkinen, Terho; King, Samantha; Nokso-Koivisto, Johanna; Novotny, Laura A; Patel, Janak A; Pettigrew, Melinda; Swords, W Edward

    2017-04-01

    Objective To perform a comprehensive review of the literature from July 2011 until June 2015 on the virology and bacteriology of otitis media in children. Data Sources PubMed database of the National Library of Medicine. Review Methods Two subpanels comprising experts in the virology and bacteriology of otitis media were created. Each panel reviewed the relevant literature in the fields of virology and bacteriology and generated draft reviews. These initial reviews were distributed to all panel members prior to meeting together at the Post-symposium Research Conference of the 18th International Symposium on Recent Advances in Otitis Media, National Harbor, Maryland, in June 2015. A final draft was created, circulated, and approved by all panel members. Conclusions Excellent progress has been made in the past 4 years in advancing our understanding of the microbiology of otitis media. Numerous advances were made in basic laboratory studies, in animal models of otitis media, in better understanding the epidemiology of disease, and in clinical practice. Implications for Practice (1) Many viruses cause acute otitis media without bacterial coinfection, and such cases do not require antibiotic treatment. (2) When respiratory syncytial virus, metapneumovirus, and influenza virus peak in the community, practitioners can expect to see an increase in clinical otitis media cases. (3) Biomarkers that predict which children with upper respiratory tract infections will develop otitis media may be available in the future. (4) Compounds that target newly identified bacterial virulence determinants may be available as future treatment options for children with otitis media.

  19. Blue Ribbon Panel Report

    Science.gov (United States)

    An NCI Cancer Currents blog by the NCI acting director thanking the cancer community for contributing to the Cancer Moonshot Blue Ribbon Panel report, which was presented to the National Cancer Advisory Board on September 7.

  20. Autoimmune liver disease panel

    Science.gov (United States)

    Liver disease test panel - autoimmune ... Autoimmune disorders are a possible cause of liver disease. The most common of these diseases are autoimmune hepatitis and primary biliary cholangitis (formerly called primary biliary cirrhosis). This group of tests ...

  1. Basic metabolic panel

    Science.gov (United States)

    ... Alternative Names SMAC7; Sequential multi-channel analysis with computer-7; SMA7; Metabolic panel 7; CHEM-7 References ... M. is also a founding member of Hi-Ethics and subscribes to the principles of the Health ...

  2. REINFORCED COMPOSITE PANEL

    DEFF Research Database (Denmark)

    2003-01-01

    A composite panel having front and back faces, the panel comprising facing reinforcement, backing reinforcement and matrix material binding to the facing and backing reinforcements, the facing and backing reinforcements each independently comprising one or more reinforcing sheets, the facing...... reinforcement being located on or embedded in matrix material adjacent to the front face of the panel, the backing reinforcement being located in a plane or planes substantially parallel to the plane or planes of the facing reinforcement, and being substantially coextensive therewith, and spaced therefrom...... by matrix material, the facing and backing reinforcements being interconnected to resist out-of-plane relative movement. The reinforced composite panel is useful as a barrier element for shielding structures, equipment and personnel from blast and/or ballistic impact damage....

  3. Maze Surgery

    Science.gov (United States)

    ... Center > Maze Surgery Menu Topics Topics FAQs Maze Surgery Article Info En español Electrical impulses in your ... called an arrhythmia. Why do I need Maze surgery? Maze surgery is also called the Maze procedure. ...

  4. Hexagon solar power panel

    Science.gov (United States)

    Rubin, I. (Inventor)

    1978-01-01

    A solar energy panel support is described upon which silicon cells are arrayed. The cells are wafer thin and of two geometrical types, both of the same area and electrical rating, namely hexagon cells and hourglass cells. The hourglass cells are composites of half hexagons. A near perfect nesting relationship of the cells achieves a high density packing whereby optimum energy production per panel area is achieved.

  5. Pop-Art Panels

    Science.gov (United States)

    Alford, Joanna

    2012-01-01

    James Rosenquist's giant Pop-art panels included realistic renderings of well-known contemporary foods and objects, juxtaposed with famous people in the news--largely from the 1960s, '70s and '80s--and really serve as visual time capsules. In this article, eighth-graders focus on the style of James Rosenquist to create their own Pop-art panel that…

  6. Equal Opportunities Advisory Panel

    CERN Multimedia

    HR Department

    2006-01-01

    At its meeting on 7 December 2006, the Standing Concertation Committee took note of the appointment of four new members of the Panel: Wisla Carena, Pierre Charrue, Sue Foffano and Markus Nordberg. The present composition of the Panel (appointed ad personam) is as follows: Tiziano Camporesi (Chairperson), Wisla Carena, Pierre Charrue, Sue Foffano, Josi Schinzel (Equal Opportunities Officer), Markus Nordberg, Christine Petit-Jean-Genaz et Elena Wildner. Human Resources Department Tel. 74480

  7. Hexagon solar power panel

    Science.gov (United States)

    Rubin, Irwin

    1978-01-01

    A solar energy panel comprises a support upon which silicon cells are arrayed. The cells are wafer thin and of two geometrical types, both of the same area and electrical rating, namely hexagon cells and hourglass cells. The hourglass cells are composites of half hexagons. A near perfect nesting relationship of the cells achieves a high density packing whereby optimum energy production per panel area is achieved.

  8. Solar energy heating panel

    Energy Technology Data Exchange (ETDEWEB)

    McMurtrie, T.

    1984-08-14

    A solar energy collecting and radiating panel for heating a fluid such as air circulating in an enclosure disposed behind the panel. The panel is in the form of a pan made of sheet metal, such as thin aluminum, darkened on its irradiated surface, the blackened or darkened surface being protected by a pane of glass. The panel has a plurality of dome-shaped dimples embossed on and projecting from its irradiated surface such as to present a large surface area to exposure to sun rays and to capture solar energy independently of the sun height or position relative to the horizon. The heat absorbed by the panel is conveyed by its back surface to air circulating by convection or by forced circulation in a thermally insulated enclosure, for heating a building or for any other utilization. A plurality of panels may be disposed side by side to form a solar energy collecting array preferably mounted on an outside wall of a building, in a southerly orientation.

  9. Panel and planar experimental shear behavior of wood panels ...

    African Journals Online (AJOL)

    Panel and planar experimental shear behavior of wood panels laminated softwood oriented OSB conditioned at different environments. ... to that measured in the case of panel shear for different environments. Keywords : oriented strand board – panel shear strength- planar shear strength - environment – moisture content ...

  10. Replacing a double-lumen tube with a single-lumen tube or a laryngeal mask airway device to reduce coughing at emergence after thoracic surgery: a randomized controlled single-blind trial.

    Science.gov (United States)

    Tanoubi, Issam; Sun, Joanna Ng Man; Drolet, Pierre; Fortier, Louis-Philippe; Donati, François

    2015-09-01

    Coughing episodes occur frequently at extubation after thoracic surgery, and this may be due in part to the double-lumen tube (DLT). In this study, the DLT was replaced with either a single-lumen endotracheal tube (ETT) or a laryngeal mask airway (LMA) device or left in place, and the incidence of coughing at emergence was compared between the three groups. Fifty-eight adults scheduled for thoracic surgery with a DLT were included. Exclusion criteria were an anticipated difficult airway, obesity, and contraindication to the use of an LMA ProSeal™ (LMA-P). After surgery but before emergence, patients were randomized to having the DLT (1) removed and replaced by an LMA-P (LMA-P Group), (2) removed and replaced by an ETT (ETT Group), or (3) left in place (DLT Group). The primary outcome was the number of coughing episodes at extubation. Among 184 patients screened, 124 did not meet inclusion criteria, and two patients, both in the ETT Group, were excluded after randomization, leaving 20, 18, and 20 patients in the LMA-P, ETT, and DLT Groups, respectively. There were fewer coughing episodes (median [quartiles]) in the LMA-P Group than in the DLT Group (0[0-1] vs 2[1-3], respectively; P = 0.01). In the DLT Group, 90% of patients coughed at least once. This incidence was not significantly different in the ETT Group (83%; P = 0.222) but was significantly reduced in the LMA-P Group (35%; P replaced by an LMA-P before emergence. The number of patients in this trial was too small to evaluate the risks associated with exchanging the airway device. This trial was registered at ClinicalTrials.gov: NCT00925613.

  11. A comparison of intrauterine balloon, intrauterine contraceptive device and hyaluronic acid gel in the prevention of adhesion reformation following hysteroscopic surgery for Asherman syndrome: a cohort study.

    Science.gov (United States)

    Lin, Xiaona; Wei, Minling; Li, T C; Huang, Qiongxiao; Huang, Dong; Zhou, Feng; Zhang, Songying

    2013-10-01

    To compare the efficacy of intrauterine balloon, intrauterine contraceptive device and hyaluronic acid gel in the prevention of the adhesion reformation after hysteroscopic adhesiolysis for Asherman's syndrome. Retrospective cohort study of 107 women with Asherman's syndrome who were treated with hysteroscopic division of intrauterine adhesions. After hysteroscopic adhesiolysis, 20 patients had intrauterine balloon inserted, 28 patients had intrauterine contraceptive device (IUD) fitted, 18 patients had hyaluronic acid gel instilled into the uterine cavity, and 41 control subjects did not have any of the three additional treatment measures. A second-look hysteroscopy was performed in all cases, and the effect of hysteroscopic adhesiolysis was scored by the American Fertility Society classification system. Both the intrauterine balloon group and the IUD group achieved significantly (Pintrauterine balloon or intrauterine device is more effective than the use of hyaluronic acid gel in the prevention of intra-uterine adhesion reformation. Crown Copyright © 2013. Published by Elsevier Ireland Ltd. All rights reserved.

  12. Semiconductor-based, large-area, flexible, electronic devices on {110} oriented substrates

    Science.gov (United States)

    Goyal, Amit

    2014-08-05

    Novel articles and methods to fabricate the same resulting in flexible, oriented, semiconductor-based, electronic devices on {110} textured substrates are disclosed. Potential applications of resulting articles are in areas of photovoltaic devices, flat-panel displays, thermophotovoltaic devices, ferroelectric devices, light emitting diode devices, computer hard disc drive devices, magnetoresistance based devices, photoluminescence based devices, non-volatile memory devices, dielectric devices, thermoelectric devices and quantum dot laser devices.

  13. [100] or [110] aligned, semiconductor-based, large-area, flexible, electronic devices

    Science.gov (United States)

    Goyal, Amit

    2015-03-24

    Novel articles and methods to fabricate the same resulting in flexible, large-area, [100] or [110] textured, semiconductor-based, electronic devices are disclosed. Potential applications of resulting articles are in areas of photovoltaic devices, flat-panel displays, thermophotovoltaic devices, ferroelectric devices, light emitting diode devices, computer hard disc drive devices, magnetoresistance based devices, photoluminescence based devices, non-volatile memory devices, dielectric devices, thermoelectric devices and quantum dot laser devices.

  14. {100} or 45.degree.-rotated {100}, semiconductor-based, large-area, flexible, electronic devices

    Science.gov (United States)

    Goyal, Amit [Knoxville, TN

    2012-05-15

    Novel articles and methods to fabricate the same resulting in flexible, {100} or 45.degree.-rotated {100} oriented, semiconductor-based, electronic devices are disclosed. Potential applications of resulting articles are in areas of photovoltaic devices, flat-panel displays, thermophotovoltaic devices, ferroelectric devices, light emitting diode devices, computer hard disc drive devices, magnetoresistance based devices, photoluminescence based devices, non-volatile memory devices, dielectric devices, thermoelectric devices and quantum dot laser devices.

  15. Advanced solar panel designs

    Science.gov (United States)

    Ralph, E. L.; Linder, E.

    1995-01-01

    This paper describes solar cell panel designs that utilize new hgih efficiency solar cells along with lightweight rigid panel technology. The resulting designs push the W/kg and W/sq m parameters to new high levels. These new designs are well suited to meet the demand for higher performance small satellites. This paper reports on progress made on two SBIR Phase 1 contracts. One panel design involved the use of large area (5.5 cm x 6.5 cm) GaAs/Ge solar cells of 19% efficiency combined with a lightweight rigid graphite fiber epoxy isogrid substrate configuration. A coupon (38 cm x 38 cm) was fabricated and tested which demonstrated an array specific power level of 60 W/kg with a potential of reaching 80 W/kg. The second panel design involved the use of newly developed high efficiency (22%) dual junction GaInP2/GaAs/Ge solar cells combined with an advanced lightweight rigid substrate using aluminum honeycomb core with high strength graphite fiber mesh facesheets. A coupon (38 cm x 38 cm) was fabricated and tested which demonstrated an array specific power of 105 W/kg and 230 W/sq m. This paper will address the construction details of the panels and an a analysis of the component weights. A strawman array design suitable for a typical small-sat mission is described for each of the two panel design technologies being studied. Benefits in respect to weight reduction, area reduction, and system cost reduction are analyzed and compared to conventional arrays.

  16. Comparison and evaluation between 3D-bolus and step-bolus, the assistive radiotherapy devices for the patients who had undergone modified radical mastectomy surgery

    Energy Technology Data Exchange (ETDEWEB)

    Jang, Won Seok; Park, Kwang Woo; Shin, Dong Bong; Kim, Jong Dae; Kim, Sei Joon; Ha, Jin Sook; Jeon, Mi Jin; Cho, Yoojin; Jung, Inho [Dept. of Radiation Oncology, Gangnam Severance Hospital, Seoul, (Korea, Republic of)

    2016-06-15

    This study aimed to compare and evaluate between the efficiency of two respective devices, 3D-bolus and step-bolus when the devices were used for the treatment of patients whose chest walls were required to undergo the electron beam therapy after the surgical procedure of modified radical mastectomy, MRM. The treatment plan of reverse hockey stick method, using the photon beam and electron beam, had been set for six breast cancer patients and these 6 breast cancer patients were selected to be the subjects for this study. The prescribed dose of electron beam for anterior chest wall was set to be 180 cGy per treatment and both the 3D-bolus, produced using 3D printer(CubeX, 3D systems, USA) and the self-made conventional step-bolus were used respectively. The surface dose under 3D-bolus and step-bolus was measured at 5 measurement spots of iso-center, lateral, medial, superior and inferior point, using GAFCHROMIC EBT3 film (International specialty products, USA) and the measured value of dose at 5 spots was compared and analyzed. Also the respective treatment plan was devised, considering the adoption of 3D-bolus and stepbolus and the separate treatment results were compared to each other. The average surface dose was 179.17 cGy when the device of 3D-bolus was adopted and 172.02 cGy when step-bolus was adopted. The average error rate against the prescribed dose of 180 cGy was -(minus) 0.47% when the device of 3D-bolus was adopted and it was -(minus) 4.43% when step-bolus was adopted. It was turned out that the maximum error rate at the point of iso-center was 2.69%, in case of 3D-bolus adoption and it was 5,54% in case of step-bolus adoption. The maximum discrepancy in terms of treatment accuracy was revealed to be about 6% when step-bolus was adopted and to be about 3% when 3D-bolus was adopted. The difference in average target dose on chest wall between 3D-bolus treatment plan and step-bolus treatment plan was shown to be insignificant as the difference was only 0

  17. Panel 3 - characterization

    Energy Technology Data Exchange (ETDEWEB)

    Erck, R.A.; Erdemir, A.; Janghsing Hsieh; Lee, R.H.; Xian Zheng Pan; Deming Shu [Argonne National Lab., IL (United States); Feldman, A. [National Inst. of Standards and Technology, Gaithersburg, MD (United States); Glass, J.T. [North Carolina State Univ., Raleigh (United States); Kleimer, R. [Coors Ceramics Co., Golden, CO (United States); Lawton, E.A. [JPL/Caltech, Pasadena, CA (United States); McHargue, C.J. [Univ. of Tennessee, Knoxville (United States)

    1993-01-01

    The task of this panel was to identify and prioritize needs in the area of characterization of diamond and diamond-like-carbon (DLC) films for use in the transportation industry. Until recent advances in production of inexpensive films of diamonds and DLC, it was not feasible that these materials could be mass produced. The Characterization Panel is restricting itself to identifying needs in areas that would be most useful to manufacturers and users in producing and utilizing diamond and DLC coatings in industry. These characterization needs include in-situ monitoring during growth, relation of structure to performance, and standards and definitions.

  18. 21 CFR 878.3925 - Plastic surgery kit and accessories.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Plastic surgery kit and accessories. 878.3925 Section 878.3925 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES GENERAL AND PLASTIC SURGERY DEVICES Prosthetic Devices § 878.3925 Plastic surgery kit and accessories. (a) Identification. ...

  19. Plasma-panel based detectors

    Science.gov (United States)

    Friedman, Peter

    2017-09-01

    The plasma panel sensor (PPS) is a novel micropattern gas detector inspired by plasma display panels (PDPs), the core component of plasma-TVs. A PDP comprises millions of discrete cells per square meter, each of which, when provided with a signal pulse, can initiate and sustain a plasma discharge. Configured as a detector, a pixel or cell is biased to discharge when a free-electron is generated in the gas. The PPS consists of an array of small plasma discharge pixels, and can be configured to have either an ``open-cell'' or ``closed-cell'' structure, operating with high gain in the Geiger region. We describe both configurations and their application to particle physics. The open-cell PPS lends itself to ultra-low-mass, ultrathin structures, whereas the closed-cell microhexcavity PPS is capable of higher performance. For the ultrathin-PPS, we are fabricating 3-inch devices based on two types of extremely thin, inorganic, transparent, substrate materials: one being 8-10 µm thick, and the other 25-27 µm thick. These gas-filled ultrathin devices are designed to operate in a beam-line vacuum environment, yet must be hermetically-sealed and gas-filled in an ambient environment at atmospheric pressure. We have successfully fabricated high resolution, submillimeter pixel electrodes on both types of ultrathin substrates. We will also report on the fabrication, staging and operation of the first microhexcavity detectors (µH-PPS). The first µH-PPS prototype devices have a 16 by 16 matrix of closed packed hexagon pixels, each having a 2 mm width. Initial tests of these detectors, conducted with Ne based gases at atmospheric pressure, indicate that each pixel responds independent of its neighboring cells, producing volt level pulse amplitudes in response to ionizing radiation. Results will include the hit rate response to a radioactive beta source, cosmic ray muons, the background from spontaneous discharge, pixel isolation and uniformity, and efficiency measurements. This

  20. Advanced Solar Panel Designs

    Science.gov (United States)

    Ralph, E. L.; Linder, E. B.

    1995-01-01

    Solar panel designs that utilize new high-efficiency solar cells and lightweight rigid panel technologies are described. The resulting designs increase the specific power (W/kg) achievable in the near-term and are well suited to meet the demands of higher performance small satellites (smallsats). Advanced solar panel designs have been developed and demonstrated on two NASA SBIR contracts at Applied Solar. The first used 19% efficient, large area (5.5 cm x 6.5 cm) GaAs/Ge solar cells with a lightweight rigid graphite epoxy isogrid substrate configuration. A 1,445 sq cm coupon was fabricated and tested to demonstrate 60 W/kg with a high potential of achieving 80 W/kg. The second panel design used new 22% efficiency, dual-junction GaInP2/GaAs/Ge solar cells combined with a lightweight aluminum core/graphite fiber mesh facesheet substrate. A 1,445 sq cm coupon was fabricated and tested to demonstrate 105 W/kg with the potential of achieving 115 W/kg.

  1. Photovoltaic-Panel Laminator

    Science.gov (United States)

    Keenan, R.

    1985-01-01

    Two-piece unit heats and presses protective layers to form laminate. Rubber diaphragm between upper and lower vacuum chambers alternates between neutral position and one that presses against solar-cell array, supplying distributed force necessary to press layers of laminate together. Encapsulation helps to protect cells from environment and to ensure long panel life while allowing efficient generation of electricity from Sunlight.

  2. Dynamic panel data models

    NARCIS (Netherlands)

    Bun, M.J.G.; Sarafidis, V.

    2013-01-01

    This Chapter reviews the recent literature on dynamic panel data models with a short time span and a large cross-section. Throughout the discussion we considerlinear models with additional endogenous covariates. First we give a broad overview of available inference methods placing emphasis on GMM.

  3. Student Panels, Business Administration

    DEFF Research Database (Denmark)

    Rask, Morten

    of MSc programmes, the MSc coordinator as well as the administrative secretary. A student panel meets with the department twice in the first year: Early in February to sum up experience from the first semester and in early in June to sum up experience from the second semester. At semester start each MSc...

  4. Turbinate surgery

    Science.gov (United States)

    Turbinectomy; Turbinoplasty; Turbinate reduction; Nasal airway surgery; Nasal obstruction - turbinate surgery ... There are several types of turbinate surgery: Turbinectomy: All or ... This can be done in several different ways, but sometimes a ...

  5. The future of glaucoma surgery

    Directory of Open Access Journals (Sweden)

    Arsham Sheybani

    2015-01-01

    Full Text Available Glaucoma surgery is ripe for innovation. In the last few years, there has been a substantial increase in the number of devices approaching commercialization. While not all that is new is necessarily good, the role of these devices in changing glaucoma surgery is equally important in terms of both success and failure. Trabeculectomy, the most commonly performed incisional filtration surgery for glaucoma, is subjective by nature and certainly has risks. As devices aim to standardize glaucoma surgery, specifically subconjunctival filtration surgery, predictability and in turn safety should theoretically improve. This may allow the glaucoma surgeon to intervene earlier in the disease process, prevent more advanced vision loss and potentially decrease the burden of medications.

  6. LCD Panels: The Electronic Wonder.

    Science.gov (United States)

    Anderson, Glenn

    1994-01-01

    Describes Liquid Crystal Display (LCD) panels and their use in the classroom. Topics discussed include active versus passive matrix panels; the number of pixels; projectors, including transmissive or reflective overhead projectors; costs; and vendors that supply LCDs. (LRW)

  7. FEMA DFIRM Panel Scheme Polygons

    Data.gov (United States)

    Minnesota Department of Natural Resources — This layer contains information about the Flood Insurance Rate Map (FIRM) panel areas. The spatial entities representing FIRM panels are polygons. The polygon for...

  8. Mounting clips for panel installation

    Science.gov (United States)

    Cavieres, Andres; Al-Haddad, Tristan; Goodman, Joseph

    2017-07-11

    A photovoltaic panel mounting clip comprising a base, central indexing tabs, flanges, lateral indexing tabs, and vertical indexing tabs. The mounting clip removably attaches one or more panels to a beam or the like structure, both mechanically and electrically. It provides secure locking of the panels in all directions, while providing guidance in all directions for accurate installation of the panels to the beam or the like structure.

  9. Color quality management in advanced flat panel display engines

    Science.gov (United States)

    Lebowsky, Fritz; Neugebauer, Charles F.; Marnatti, David M.

    2003-01-01

    During recent years color reproduction systems for consumer needs have experienced various difficulties. In particular, flat panels and printers could not reach a satisfactory color match. The RGB image stored on an Internet server of a retailer did not show the desired colors on a consumer display device or printer device. STMicroelectronics addresses this important color reproduction issue inside their advanced display engines using novel algorithms targeted for low cost consumer flat panels. Using a new and genuine RGB color space transformation, which combines a gamma correction Look-Up-Table, tetrahedrization, and linear interpolation, we satisfy market demands.

  10. Experience with citizens panels

    International Nuclear Information System (INIS)

    Selwyn, J.

    2002-01-01

    In May 1999, 200 delegates attended a four-day UK Consensus Conference on radioactive waste management, which was organised by the UK Centre for Economic and Environmental Development (UK CEED) and supported by the government, industry and environmental groups. The event brought together a Citizens' Panel of fifteen people, randomly selected to represent a cross section of the British public, together with the major players in the debate. The four-day conference saw the panel cross-examine expert witnesses from organisations such as NIREX, British Nuclear Fuels Limited, the Ministry of Defence, Greenpeace and Friends of the Earth. The findings of their investigations were put together in a report containing detailed recommendations for government and industry and presented to the Minister on the final day. (author)

  11. Rational Design of Composite Panels

    DEFF Research Database (Denmark)

    Riber, Hans Jørgen

    1996-01-01

    panels as well as single-skin panels, the effect of shear is included. The finite difference method is used solving the system of governing plate equations. Laterally loaded panels are analysed with respect to mid-point deflections and stresses. The numerical results are discussed in the light of 'Det...

  12. Panel data analysis using EViews

    CERN Document Server

    Agung, I Gusti Ngurah

    2013-01-01

    A comprehensive and accessible guide to panel data analysis using EViews software This book explores the use of EViews software in creating panel data analysis using appropriate empirical models and real datasets. Guidance is given on developing alternative descriptive statistical summaries for evaluation and providing policy analysis based on pool panel data. Various alternative models based on panel data are explored, including univariate general linear models, fixed effect models and causal models, and guidance on the advantages and disadvantages of each one is given. Panel Data Analysis

  13. Can I use a Panel? Panel Conditioning and Attrition Bias in Panel Surveys

    NARCIS (Netherlands)

    Das, J.W.M.; Toepoel, V.; van Soest, A.H.O.

    2007-01-01

    Over the past decades there has been an increasing use of panel surveys at the household or individual level, instead of using independent cross-sections. Panel data have important advantages, but there are also two potential drawbacks: attrition bias and panel conditioning effects. Attrition bias

  14. Dental Implant Surgery

    Science.gov (United States)

    ... here to find out more. Dental Implant Surgery Dental Implant Surgery Dental implant surgery is, of course, surgery, ... here to find out more. Dental Implant Surgery Dental Implant Surgery Dental implant surgery is, of course, surgery, ...

  15. Corrective Jaw Surgery

    Medline Plus

    Full Text Available ... here to find out more. Dental Implant Surgery Dental Implant Surgery Dental implant surgery is, of course, surgery, ... here to find out more. Dental Implant Surgery Dental Implant Surgery Dental implant surgery is, of course, surgery, ...

  16. Corrective Jaw Surgery

    Medline Plus

    Full Text Available ... to find out more. Dental Implant Surgery Dental Implant Surgery Dental implant surgery is, of course, surgery, ... to find out more. Dental Implant Surgery Dental Implant Surgery Dental implant surgery is, of course, surgery, ...

  17. Development of a simple device enabling percutaneous flow regulation for a small vascular graft for a Blalock-Taussig shunt capable of flow regulation: complete translation of a review article originally published in Pediatric Cardiology and Cardiac Surgery (154-159, 2016: vol. 32).

    Science.gov (United States)

    Motohashi, Yoshikazu; Shimada, Ryo; Sasaki, Tomoyasu; Katsumata, Takahiro; Dan, Kazunori; Tsutsui, Yasuhiro; Nemoto, Shintaro

    2018-03-01

    The Blalock-Taussig shunt (BTS) operation is a cornerstone as initial palliative surgery for congenital heart disease with severely reduced pulmonary blood flow (PBF). The ideal PBF provided by BTS is crucial for an uneventful postoperative course, since excess PBF results in acute distress of the systemic circulation and insufficient PBF requires another BTS surgery. Therefore, the goal of this study was to develop a simple device to control the shunt graft flow percutaneously using a constrictor balloon connected to a subcutaneous port. The device consists of a cylindrical balloon and an anti-bending structure extension connected to the balloon center. A PTFE vascular graft wrapped by the device was connected to a simulated closed circuit to measure the relationship between pressure and blood flow while changing the inner volume of the balloon. In a beagle model of replacement of the right carotid artery, blood flow velocity was measured in the carotid artery after saline injection into the balloon. The blood flow velocity before and after balloon inflation was compared immediately after implantation of the device and at 3 months after implantation. The device provided good flow control by inflating and deflating the balloon ex vivo and in vivo for up to 3 months in a canine model with a small graft wrapped with the device. The simple device developed in this study may enable regulation of PBF through a small vascular graft and help to prevent severe morbidity and mortality in the clinical setting of BTS.

  18. Intrauterine Devices

    Science.gov (United States)

    S HARE W ITH W OMEN INTRAUTERINE DEVICES INTRAUTERINE DEVICES What is An Intrauterine Device? An intrauterine device (IUD) is anything that is placed inside the uterus (womb) to prevent pregnancy. ...

  19. Concentrating photovoltaic solar panel

    Science.gov (United States)

    Cashion, Steven A; Bowser, Michael R; Farrelly, Mark B; Hines, Braden E; Holmes, Howard C; Johnson, Jr., Richard L; Russell, Richard J; Turk, Michael F

    2014-04-15

    The present invention relates to photovoltaic power systems, photovoltaic concentrator modules, and related methods. In particular, the present invention features concentrator modules having interior points of attachment for an articulating mechanism and/or an articulating mechanism that has a unique arrangement of chassis members so as to isolate bending, etc. from being transferred among the chassis members. The present invention also features adjustable solar panel mounting features and/or mounting features with two or more degrees of freedom. The present invention also features a mechanical fastener for secondary optics in a concentrator module.

  20. Photovoltaic panel clamp

    Science.gov (United States)

    Mittan, Margaret Birmingham [Oakland, CA; Miros, Robert H. J. [Fairfax, CA; Brown, Malcolm P [San Francisco, CA; Stancel, Robert [Loss Altos Hills, CA

    2012-06-05

    A photovoltaic panel clamp includes an upper and lower section. The interface between the assembled clamp halves and the module edge is filled by a flexible gasket material, such as EPDM rubber. The gasket preferably has small, finger like protrusions that allow for easy insertion onto the module edge while being reversed makes it more difficult to remove them from the module once installed. The clamp includes mounting posts or an integral axle to engage a bracket. The clamp also may include a locking tongue to secure the clamp to a bracket.

  1. 78 FR 68714 - Medical Devices; Ophthalmic Devices; Classification of the Scleral Plug

    Science.gov (United States)

    2013-11-15

    .... FDA-2012-N-1238] Medical Devices; Ophthalmic Devices; Classification of the Scleral Plug AGENCY: Food... composed of surgical grade stainless steel (with or without coating in gold, silver, or titanium) from... steps: (1) Receives a recommendation from a device classification panel (an FDA advisory committee); (2...

  2. Suboccipital neuropathy after bone conduction device placement

    NARCIS (Netherlands)

    Faber, H.T.; Ru, J.A. de

    2013-01-01

    OBJECTIVE: To describe the clinical characteristics of a 70-year-old female with occipital neuropathy following bone conduction device surgery. DESCRIPTION: A 65-year-old woman underwent bone conduction device placement surgery on the left temporal bone. Postoperatively she progressively developed

  3. Estimating capacity of solar thermoelectric generator (STEG) panels

    International Nuclear Information System (INIS)

    Kokhova, I.I.; Malevskii, Yu.N.; Tsvetkov, A.I.

    1979-01-01

    Energy characteristics of a solar thermoelectric generator (STEG) panel without solar-flux concentration are considered. The design of such devices is no simple task. Several fully justified assumptions have been introduced in an attempt to obtain a solution convenient for engineering calculations

  4. Hemorrhoid surgery

    Science.gov (United States)

    ... surgery. Hemorrhoid surgery may involve: Putting a small rubber band around a hemorrhoid to shrink it by blocking blood flow. Stapling a hemorrhoid to block blood flow, causing it to shrink. Using a ...

  5. Plastic Surgery

    Science.gov (United States)

    ... idea for teens? As with everything, there are right and wrong reasons to have surgery. Cosmetic surgery is unlikely to change your life. Most board-certified plastic surgeons spend a lot of time ... the right reasons. Many plastic surgery procedures are just that — ...

  6. ALDS 1978 panel review. [PNL

    Energy Technology Data Exchange (ETDEWEB)

    Hall, D.L. (ed.)

    1979-08-01

    Pacific Northwest Laboratory (PNL) is examining the analysis of large data sets (ALDS). After one year's work, a panel was convened to evaluate the project. This document is the permanent record of that panel review. It consists of edited transcripts of presentations made to the panel by the PNL staff, a summary of the responses of the panel to these presentations, and PNL's plans for the development of the ALDS project. The representations of the PNL staff described various aspects of the project and/or the philosophy surrounding the project. Supporting materials appear in appendixes. 20 figures, 4 tables. (RWR)

  7. Panel summary report

    International Nuclear Information System (INIS)

    Anon.

    1979-01-01

    Previous Advisory Group Meetings have led to IAEA Technical Reports No.15=5 (1974) on thermal discharge, 118 (1970) and 169 (1975) on sampling, storage and analysis methods for marine radioactivity studies, 167 (1975) on design of marine biological studies permitting comparative evaluation, and 172 (1976) on the effects of ionizing radiation on aquative organisms and eco-systems. The aim of the present report was a bringing into perspective not only problems designing radioecological experiments but to describe reliable experimental methodology suitable for a successful evaluation of radioactivity cycling, and of the effects of such radioactive additions to aquatic environments, as a result of nuclear activities. Specific examples are described. Individual studies presented to the Panel have been treated in detail, and constitute 19 separate INIS entries

  8. A Novel Lighting OLED Panel Design

    Directory of Open Access Journals (Sweden)

    Enyang Zhang

    2016-11-01

    Full Text Available A novel OLED (organic light emitting diode lighting panel, which uses a special layout design, can reduce the photolithography cycles and process costs and is more reliable. It only needs two steps of photolithography cycles, which include an ITO (InSnO compound transparent oxide pattern and insulator pattern. There is no need for the metal bus pattern of the ordinary design. The OLED device structure is a type of red–green–blue (RGB-stacked emitting layer that has a good color index and greater adjustability, which improves the performance of the device. This novel design has the same equipment and material requirement compared to the ordinary design, and it is very beneficial in terms of high volume and low-cost production. It uses a hyper driving method because the entire OLED lighting panel is divided into many sub-emitting units; if one of the sub-emitting units is burned out, it has no effect on the adjacent sub-emitting unit, so the reliability is markedly better than the ordinary design.

  9. Nutritional advice for community patients: insights from a panel discussion.

    Science.gov (United States)

    Thomas, Linda V; Jenkins, Gill; Belton, Julie; Clements, Suzie; Jacob, Ciara; Johnson, Naomi; Joy, Deirdre; Low, Jennifer; Munson, Eileen; Sheppard, Jessica

    2016-03-01

    This article describes the conclusions of an expert panel that discussed four case studies; these were examples of patients typically encountered by nurses working in the community. The panel considered the nutritional and lifestyle advice that could be given by nurses relating to conditions such as irritable bowel syndrome (IBS), depression, chronic fatigue syndrome, vulnerability to common infections, elderly care, recurrent urinary tract infection, antibiotic use, and risk of type 2 diabetes. A general conclusion was the importance of motivational interviewing techniques in achieving full understanding of patients' concerns and to determine the best health strategy. As well as specific guidance appropriate for each disorder, a range of information sources for both health professionals and patients are listed in the paper. The panel noted that, although general nutritional advice can be given by nurses working at GP surgeries and in the community, patients should always be referred to registered dietitians or nutritionists if significant dietary changes are considered.

  10. Matlab Software for Spatial Panels

    NARCIS (Netherlands)

    Elhorst, J.Paul

    2014-01-01

    Elhorst provides Matlab routines to estimate spatial panel data models at his website. This article extends these routines to include the bias correction procedure proposed by Lee and Yu if the spatial panel data model contains spatial and/or time-period fixed effects, the direct and indirect

  11. Electronic route information panels (DRIPs).

    NARCIS (Netherlands)

    2008-01-01

    Also in the Netherlands, the term Dynamic Route Information Panel (DRIP) is used for an electronic route information panel. A DRIP usually indicates whether there are queues on the various routes to a particular destination and how long they are. On certain locations DRIPS also give the estimated

  12. Strong increase of solar panels

    International Nuclear Information System (INIS)

    Segers, R.; Janssen, S.

    2012-01-01

    The number of installed solar panels in 2011 has increased again. 40 megawatt of new panels have been installed. This increase is twice as high as the year before. The production of solar power increased to 90 million kWh in 2011 as a result of this expansion. However, the share of solar power in total energy use is still very limited. [nl

  13. From virtual reality to the operating room: the endoscopic sinus surgery simulator experiment.

    Science.gov (United States)

    Fried, Marvin P; Sadoughi, Babak; Gibber, Marc J; Jacobs, Joseph B; Lebowitz, Richard A; Ross, Douglas A; Bent, John P; Parikh, Sanjay R; Sasaki, Clarence T; Schaefer, Steven D

    2010-02-01

    Establish the feasibility of a predictive validity study in sinus surgery simulation training and demonstrate the effectiveness of the Endoscopic Sinus Surgery Simulator (ES3) as a training device. Prospective, multi-institutional controlled trial. Four tertiary academic centers with accredited otolaryngology-head and neck surgery residency programs. Twelve ES3-trained novice residents were compared with 13 control novice residents. Subjects were assessed on the performance of basic sinus surgery tasks. Their first in vivo procedure was video recorded and submitted to a blinded panel of independent experts after the panel established a minimum inter-rater reliability of 80 percent. The recordings were reviewed by using a standardized computer-assisted method and customized metrics. Results were analyzed with the Mann-Whitney U test. Internal rater consistency was verified with Pearson moment correlation. Completion time was significantly shorter in the experimental group (injection P = 0.003, dissection P manipulation (P = 0.011), and made fewer technical mistakes during the injection task (P = 0.048) compared with the control group. The raters' post hoc internal consistency was deemed adequate (r > 0.5 between serial measurements). The validity of the ES3 as an effective surgical trainer was verified in multiple instances, including those not depending on subjective rater evaluations. The ES3 is one of the few virtual reality simulators with a comprehensive validation record. Advanced simulation technologies need more rapid implementation in otolaryngology training, as they present noteworthy potential for high-quality surgical education while meeting the necessity of patient safety. Copyright 2010 American Academy of Otolaryngology-Head and Neck Surgery Foundation. Published by Mosby, Inc. All rights reserved.

  14. Integrated control rod monitoring device

    International Nuclear Information System (INIS)

    Saito, Katsuhiro

    1997-01-01

    The present invention provides a device in which an entire control rod driving time measuring device and a control rod position support device in a reactor building and a central control chamber are integrated systematically to save hardwares such as a signal input/output device and signal cables between boards. Namely, (1) functions of the entire control rod driving time measuring device for monitoring control rods which control the reactor power and a control rod position indication device are integrated into one identical system. Then, the entire devices can be made compact by the integration of the functions. (2) The functions of the entire control rod driving time measuring device and the control rod position indication device are integrated in a central operation board and a board in the site. Then, the place for the installation of them can be used in common in any of the cases. (3) The functions of the entire control rod driving time measuring device and the control rod position indication device are integrated to one identical system to save hardware to be used. Then, signal input/output devices and drift branching panel boards in the site and the central operation board can be saved, and cables for connecting both of the boards is no more necessary. (I.S.)

  15. Viscoless microincision cataract surgery

    Directory of Open Access Journals (Sweden)

    Guy Sallet

    2008-06-01

    Full Text Available Guy SalletDepartment of Opthamology, Aalsters Stedelijk Ziekenhuis, BelgiumAbstract: A cataract surgery technique is described in which incisions, continuous circular capsulorhexis and hydrodissection are made without the use of any viscoelastics. Two small incisions are created through which the different parts of the procedure can take place, maintaining a stable anterior chamber under continuous irrigation. Subsequent bimanual phacoemulsification can be done through these microincisions. At the end of the procedure, an intraocular lens can be inserted through the self-sealing incision under continuous irrigation. 50 consecutive cataract patients were operated on without the use of viscoelastics and then compared with a group of 50 patients who had been helped with viscoelastics. No difference in outcome, endothelial cell count or pachymetry was noted between the two groups. No intraoperative complication was encountered. Viscoless cataract surgery was a safe procedure with potential advantages.Keywords: ophthalmic visco-surgical device, viscoless cataract surgery, microincision

  16. Interfacial Crack Arrest in Sandwich Panels with Embedded Crack Stoppers Subjected to Fatigue Loading

    DEFF Research Database (Denmark)

    Martakos, G.; Andreasen, J. H.; Berggreen, Christian

    2017-01-01

    A novel crack arresting device has been implemented in sandwich panels and tested using a special rig to apply out-of-plane loading on the sandwich panel face-sheets. Fatigue crack propagation was induced in the face-core interface of the sandwich panels which met the crack arrester. The effect...... of the embedded crack arresters was evaluated in terms of the achieved enhancement of the damage tolerance of the tested sandwich panels. A finite element (FE) model of the experimental setup was used for predicting propagation rates and direction of the crack growth. The FE simulation was based on the adoption...... as the overall performance of the crack arresters....

  17. Improving escape panel selectivity in Nephrops directed fisheries by actively stimulating fish behaviour

    DEFF Research Database (Denmark)

    Krag, Ludvig Ahm; Herrmann, Bent; Feekings, Jordan P.

    2017-01-01

    with it. To increase the efficiency of such panels, the contact probability needs to be improved. In this study, we investigate to what extent the efficiency of escape panels can be improved by actively stimulating the escape behaviour of fish. The performance of two identical panel sections was compared...... in a twin-trawl system, one with and one without a stimulation device. A new coupled analysis method was used to explicitly quantify the improvements in contact probability and release efficiency for the escape panel. The results demonstrate that by actively stimulating escape behaviour, the contact...

  18. Temperature Dependences on Various Types of Photovoltaic (PV) Panel

    International Nuclear Information System (INIS)

    Audwinto, I A; Leong, C S; Sopian, K; Zaidi, S H

    2015-01-01

    Temperature is one of the key roles in PV technology performance, since with the increases of temperature the open-circuit voltage will drop accordingly so do the electrical efficiency and power output generation. Different types of Photovoltaic (PV) panels- silicon solar panels and thin film solar panels; mono-crystalline, poly-crystalline, CIS, CIGS, CdTe, back-contact, and bi-facial solar panel under 40°C to 70°C approximately with 5°C interval have been comparatively analyzed their actual performances with uniformly distribution of light illumination from tungsten halogen light source, ±500W/m 2 . DC-Electronic Load and Data Logger devices with “Lab View” data program interface were used to collect all the necessary parameters in this study. Time needed to achieve a certain degree of temperature was recorded. Generally, each of the panels needed 15 minutes to 20 minutes to reach 70°C. Halogen based light source is not compatible in short wave-length in response to thin-film solar cell. Within this period of times, all the panels are facing a performance loss up to 15%. Other parameters; P max , V max , I max , V oc , I sc , R serries , R shunt , Fillfactor were collected as study cases. Our study is important in determining Photovoltaic type selection and system design as for study or industrial needed under different temperature condition. (paper)

  19. Factors Influencing the Adoption of Minimally Invasive Surgery

    African Journals Online (AJOL)

    mean score, 2.61). The ... Absence of enabling functional equipment or device at the time of surgery is the most significant institutional ..... Wound Healing After Hip Replacement Surgery: Effects on Duration of Hospitalization,” Anesth. Analg. 2005 ...

  20. 1994 Panel 1 Utilization Plan

    International Nuclear Information System (INIS)

    1994-01-01

    The Waste Isolation Pilot Plant (WIPP) is intended to receive, handle, and permanently dispose of transuranic (TRU) waste. To fulfill this mission, the U.S. Department of Energy (DOE) constructed a full-scale facility to demonstrate both technical and operational principles of the permanent isolation of TRU waste. The WIPP consists of surface and underground facilities. Panel 1 is situated in the underground facility horizon which is located approximately 2,150 feet below the surface in the predominantly halite Salado Formation. The Panel 1 Utilization Plan provides a strategy for the optimum use of Panel 1 which is consistent with the priorities established by the DOE to accomplish the WIPP mission. These priorities, which include maintaining personnel safety, conducting performance assessment, and continued operational enhancements, are the guiding premise for the decisions on the planned usage of the WIPP underground facility. The continuation of ongoing investigations along with the planned testing and training to be carried out in Panel 1 will enhance the current knowledge and understanding of the operational and geotechnical aspects of the panel configuration. This enhancement will ultimately lead to safer, more efficient, and more cost-effective methods of operation. Excavation of the waste storage area began in May 1986 with the mining of entries to Panel 1. The original design for the waste storage rooms at the WIPP provided a limited period of time during which to mine the openings and to emplace waste. Each panel, consisting of seven storage rooms, was scheduled to be mined and filled in less than 5 years. Panel 1 was developed to receive waste for a demonstration phase that was scheduled to start in October 1988. The demonstration phase was deferred, and the experimental test program was modified to use contact-handled (CH) transuranic waste in bin-scale tests, planned for Room 1, Panel 1

  1. DC current distribution mapping system of the solar panels using a HTS-SQUID gradiometer

    International Nuclear Information System (INIS)

    Miyazaki, Shingo; Kasuya, Syohei; Saari, Mohd Mawardi; Sakai, Kenji; Kiwa, Toshihiko; Tsukada, Keiji; Tsukamoto, Akira; Adachi, Seiji; Tanabe, Keiichi

    2014-01-01

    Solar panels are expected to play a major role as a source of sustainable energy. In order to evaluate solar panels, non-destructive tests, such as defect inspections and response property evaluations, are necessary. We developed a DC current distribution mapping system of the solar panels using a High Critical Temperature Superconductor Superconducting Quantum Interference Device (HTS-SQUID) gradiometer with ramp edge type Josephson junctions. Two independent components of the magnetic fields perpendicular to the panel surface (∂Bz/∂x, ∂Bz/∂y) were detected. The direct current of the solar panel is visualized by calculating the composition of the two signal components, the phase angle, and mapping the DC current vector. The developed system can evaluate the uniformity of DC current distributions precisely and may be applicable for defect detection of solar panels.

  2. Robotic surgery in gynecology.

    Science.gov (United States)

    Alkatout, Ibrahim; Mettler, Liselotte; Maass, Nicolai; Ackermann, Johannes

    2016-01-01

    Robotic surgery is the most dynamic development in the sector of minimally invasive operations currently. It should not be viewed as an alternative to laparoscopy, but as the next step in a process of technological evolution. The advancement of robotic surgery, in terms of the introduction of the Da Vinci Xi, permits the variable use of optical devices in all four trocars. Due to the new geometry of the "patient cart," an operation can be performed in all spatial directions without re-docking. Longer instruments and the markedly narrower mechanical elements of the "patient cart" provide greater flexibility as well as access similar to those of traditional laparoscopy. Currently, robotic surgery is used for a variety of indications in the treatment of benign gynecological diseases as well as malignant ones. Interdisciplinary cooperation and cooperation over large geographical distances have been rendered possible by telemedicine, and will ensure comprehensive patient care in the future by highly specialized surgery teams. In addition, the second operation console and the operation simulator constitute a new dimension in advanced surgical training. The disadvantages of robotic surgery remain the high costs of acquisition and maintenance as well as the laborious training of medical personnel before they are confident with using the technology.

  3. PAEDIATRIC SURGERY

    African Journals Online (AJOL)

    3 Department of Paediatric Surgery, Sophia's Children Hospital/Erasmus Medical Centre, Rotterdam, The Netherlands. 4 Department of Paediatric Surgery, Emma's Children Hospital/Academic Medical Centre, Amsterdam, The Netherlands. 5 Department of Radiology, Red Cross War Memorial Children's Hospital, ...

  4. PAEDIATRIC SURGERY

    African Journals Online (AJOL)

    Gastroschisis in a developing country: poor resuscitation is a more significant predictor of mortality than postnatal transfer time. PAEDIATRIC SURGERY. P Stevens,1 E Muller,1 P Becker2. 1 Department of Paediatric Surgery, Steve Biko Academic Hospital, University of Pretoria. 2 South African Medical Research Council.

  5. Laboratory panel and radiometer calibration

    CSIR Research Space (South Africa)

    Deadman, AJ

    2011-07-01

    Full Text Available directly by Labsphere or are derived from comparison with other panels that have been calibrated by Labsphere. These 8?/hemispherical reflectance values are used when calculating the absolute reflectance of a test site. Two institutes South Dakota...

  6. Exascale Workshop Panel Report Meeting

    Energy Technology Data Exchange (ETDEWEB)

    Khaleel, Mohammad A.

    2010-07-01

    The Exascale Review Panel consists of 12 scientists and engineers with experience in various aspects of high-performance computing and its application, development, and management. The Panel hear presentations by several representatives of the workshops and town meetings convened over the past few years to examine the need for exascale computation capability and the justification for a U.S. Department of Energy (DOE) program to develop such capability. This report summarizes information provided by the presenters and substantial written reports to the Panel in advance of the meeting in Washington D.C. on January 19-20, 2010. The report also summarizes the Panel's conclusions with regard to the justification of a DOE-led exascale initiative.

  7. Reminder - Equal Opportunities Advisory Panel

    CERN Multimedia

    HR Department

    2007-01-01

    At its meeting on 7 December 2006, the Standing Concertation Committee also took note of the nomination of a fourth new member of the Panel: Wisla Carena. The present composition of the Panel (appointed ad personam) is now as follows: Tiziano Camporesi (Chairperson), Wisla Carena, Pierre Charrue, Sue Foffano, Josi Schinzel (Equal Opportunities Officer), Markus Nordberg, Christine Petit-Jean-Genaz and Elena Wildner. Human Resources Department Tel. 74480

  8. OLED panel with fuses

    Science.gov (United States)

    Levermore, Levermore; Pang, Huiqing; Rajan, Kamala

    2014-09-16

    Embodiments may provide a first device that may comprise a substrate, a plurality of conductive bus lines disposed over the substrate, and a plurality of OLED circuit elements disposed on the substrate, where each of the OLED circuit elements comprises one and only one pixel electrically connected in series with a fuse. Each pixel may further comprise a first electrode, a second electrode, and an organic electroluminescent (EL) material disposed between the first and the second electrodes. The fuse of each of the plurality of OLED circuit elements may electrically connect each of the OLED circuit elements to at least one of the plurality of bus lines. Each of the plurality of bus lines may be electrically connected to a plurality of OLED circuit elements that are commonly addressable and at least two of the bus lines may be separately addressable.

  9. Pressurized waterproof case electronic device

    KAUST Repository

    Berumen, Michael L.

    2013-01-31

    A pressurized waterproof case for an electronic device is particularly adapted for fluid-tight containment and operation of a touch-screen electronic device or the like therein at some appreciable water depth. In one example, the case may be formed as an enclosure having an open top panel or face covered by a flexible, transparent membrane or the like for the operation of the touchscreen device within the case. A pressurizing system is provided for the case to pressurize the case and the electronic device therein to slightly greater than ambient in order to prevent the external water pressure from bearing against the transparent membrane and pressing it against the touch screen, thereby precluding operation of the touch screen device within the case. The pressurizing system may include a small gas cartridge or may be provided from an external source.

  10. American Society for Laser Medicine and Surgery

    Science.gov (United States)

    ... Back Specialty Laser and Energy-Based Device Use Dentistry Dermatology General Surgery Neurosurgery Obstetrics/Gynecology Oncology Ophthalmology ... About ASLMS Code of Ethics Standards of Practice History Governance Back Governance Board of Directors Committees Membership ...

  11. French guidelines for enhanced recovery after elective colorectal surgery.

    OpenAIRE

    Alfonsi, P; Slim, K; Chauvin, M; Mariani, P; Faucheron, J L; Fletcher, D; Lois, Fernande

    2014-01-01

    Enhanced recovery after surgery provides patients with optimal means to counteract or minimize the deleterious effects of surgery. This concept can be adapted to suit a specific surgical procedure (i.e., colorectal surgery) and comes in the form of a program or a clinical pathway covering the pre-, intra- and postoperative periods. The purpose of these Expert Panel Guidelines was firstly to assess the impact of each parameter typically included in the fast-track programs on six foreseeable co...

  12. The Use of PCs, Smartphones, and Tablets in a Probability-Based Panel Survey : Effects on Survey Measurement Error

    NARCIS (Netherlands)

    Lugtig, Peter; Toepoel, Vera

    2016-01-01

    Respondents in an Internet panel survey can often choose which device they use to complete questionnaires: a traditional PC, laptop, tablet computer, or a smartphone. Because all these devices have different screen sizes and modes of data entry, measurement errors may differ between devices. Using

  13. Cochlear implant revision surgeries in children.

    Science.gov (United States)

    Amaral, Maria Stella Arantes do; Reis, Ana Cláudia Mirândola B; Massuda, Eduardo T; Hyppolito, Miguel Angelo

    2018-02-16

    The surgery during which the cochlear implant internal device is implanted is not entirely free of risks and may produce problems that will require revision surgeries. To verify the indications for cochlear implantation revision surgery for the cochlear implant internal device, its effectiveness and its correlation with certain variables related to language and hearing. A retrospective study of patients under 18 years submitted to cochlear implant Surgery from 2004 to 2015 in a public hospital in Brazil. Data collected were: age at the time of implantation, gender, etiology of the hearing loss, audiological and oral language characteristics of each patient before and after Cochlear Implant surgery and any need for surgical revision and the reason for it. Two hundred and sixty-five surgeries were performed in 236 patients. Eight patients received a bilateral cochlear implant and 10 patients required revision surgery. Thirty-two surgeries were necessary for these 10 children (1 bilateral cochlear implant), of which 21 were revision surgeries. In 2 children, cochlear implant removal was necessary, without reimplantation, one with cochlear malformation due to incomplete partition type I and another due to trauma. With respect to the cause for revision surgery, of the 8 children who were successfully reimplanted, four had cochlear calcification following meningitis, one followed trauma, one exhibited a facial nerve malformation, one experienced a failure of the cochlear implant internal device and one revision surgery was necessary because the electrode was twisted. The incidence of the cochlear implant revision surgery was 4.23%. The period following the revision surgeries revealed an improvement in the subject's hearing and language performance, indicating that these surgeries are valid in most cases. Copyright © 2018 Associação Brasileira de Otorrinolaringologia e Cirurgia Cérvico-Facial. Published by Elsevier Editora Ltda. All rights reserved.

  14. Heat shielding device

    International Nuclear Information System (INIS)

    Yatabe, Hiroshi; Motoya, Koji; Kodama, Hiroshi.

    1997-01-01

    Panel-like water cooling tubes are disposed on a shielding concrete wall as a floor surface on which a reactor pressure vessel of a HTGR type reactor is settled. The panel like water cooling tube comprises a large number of water cooling tubes and fin plates connecting them with each other. A heat shielding device is disposed to the opening of an air vent hole on the shielding concrete wall. The heat shielding device has a plurality of supports are disposed between a disk-like upper support plate larger than the opening of the vent hole and covered with a heat insulation material and a lower support plate having a vent hole at the center. The lower support plate is connected with the fin plate. A portion between the supports is formed as pressure releasing channels. Radiation heat from the reactor pressure vessel is transferred to the fin plate by way of the upper support plate, support and a lower support plate and transferred to cooling water of a water-cooling pipeline. Accordingly, radiation heat of the reactor pressure vessel is not transferred to the vent holes. (I.N.)

  15. Rodding Surgery

    Science.gov (United States)

    ... usually undertaken as a scheduled elective procedure. An optimal age for a first rodding surgery has not ... which may prevent or postpone the need for replacement. The smallest diameter expanding rods are still too ...

  16. Lung surgery

    Science.gov (United States)

    ... the pulmonary artery ( pulmonary embolism ) Treat complications of tuberculosis Video-assisted thoracoscopic surgery can be used to ... Louisiana State University Health Sciences Center-Shreveport, Shreveport, LA. Review provided by VeriMed Healthcare Network. Also reviewed ...

  17. Bariatric Surgery

    Science.gov (United States)

    ... action of certain hormones, such as ghrelin —“the hunger hormone.” People have these types of surgery if ... organizations to further patient education on hormone related issues. Network Sponsors The Hormone Health Network is supported ...

  18. Epilepsy Surgery

    Science.gov (United States)

    ... and the portion of your brain that's involved: Memory problems. The temporal lobe handles memory and language functions, so surgery on this part ... computerized tomography (SPECT). The scan image varies in color depending on the amount of blood flow in ...

  19. After Surgery

    Science.gov (United States)

    After any operation, you'll have some side effects. There is usually some pain with surgery. There ... anesthesia, or accidental injury. Some people have a greater risk of complications because of other medical conditions. ...

  20. Brain surgery

    Science.gov (United States)

    Craniotomy; Surgery - brain; Neurosurgery; Craniectomy; Stereotactic craniotomy; Stereotactic brain biopsy; Endoscopic craniotomy ... Barnett J, Mohanty A, Desai SK, Patterson JT. Neurosurgery. In: Townsend CM Jr, Beauchamp RD, Evers BM, ...

  1. Diffractive flat panel solar concentrators of a novel design.

    Science.gov (United States)

    de Jong, Ties M; de Boer, Dick K G; Bastiaansen, Cees W M

    2016-07-11

    A novel design for a flat panel solar concentrator is presented which is based on a light guide with a grating applied on top that diffracts light into total internal reflection. By combining geometrical and diffractive optics the geometrical concentration ratio is optimized according to the principles of nonimaging optics, while the thickness of the device is minimized due to the use of total internal reflection.

  2. Concentration device

    DEFF Research Database (Denmark)

    2013-01-01

    A concentration device (2) for filter filtration concentration of particles (4) from a volume of a fluid (6). The concentration device (2) comprises a filter (8) configured to filter particles (4) of a predefined size in the volume of the fluid (6). The concentration device (2) comprises...

  3. Photovoltaic device

    Energy Technology Data Exchange (ETDEWEB)

    Reese, Jason A.; Keenihan, James R.; Gaston, Ryan S.; Kauffmann, Keith L.; Langmaid, Joseph A.; Lopez, Leonardo C.; Maak, Kevin D.; Mills, Michael E.; Ramesh, Narayan; Teli, Samar R.

    2015-09-01

    The present invention is premised upon an improved photovoltaic device ("PV device"), more particularly to an improved photovoltaic device (10) with a multilayered photovoltaic cell assembly (100) and a body portion (200) joined at an interface region (410) and including an intermediate layer (500), at least one interconnecting structural member (1500), relieving feature (2500), unique component geometry, or any combination thereof.

  4. Photovoltaic device

    Energy Technology Data Exchange (ETDEWEB)

    Reese, Jason A; Keenihan, James R; Gaston, Ryan S; Kauffmann, Keith L; Langmaid, Joseph A; Lopez, Leonardo; Maak, Kevin D; Mills, Michael E; Ramesh, Narayan; Teli, Samar R

    2017-03-21

    The present invention is premised upon an improved photovoltaic device ("PV device"), more particularly to an improved photovoltaic device with a multilayered photovoltaic cell assembly and a body portion joined at an interface region and including an intermediate layer, at least one interconnecting structural member, relieving feature, unique component geometry, or any combination thereof.

  5. Bariatric surgery

    Science.gov (United States)

    Karmali, Shahzeer; Stoklossa, Carlene Johnson; Sharma, Arya; Stadnyk, Janet; Christiansen, Sandra; Cottreau, Danielle; Birch, Daniel W.

    2010-01-01

    Abstract OBJECTIVE To review the management of bariatric surgical patients. QUALITY OF EVIDENCE MEDLINE, EMBASE, and Cochrane Library databases were searched, as well as PubMed US National Library, from January 1950 to December 2009. Evidence was levels I, II, and III. MAIN MESSAGE Bariatric surgery should be considered for obese patients at high risk of morbidity and mortality who have not achieved adequate weight loss with lifestyle and medical management and who are suffering from the complications of obesity. Bariatric surgery can result in substantial weight loss, resolution of comorbid conditions, and improved quality of life. The patient’s weight-loss history; his or her personal accountability, responsibility, and comprehension; and the acceptable level of risk must be taken into account. Complications include technical failure, bleeding, abdominal pain, nausea or vomiting, excess loose skin, bowel obstruction, ulcers, and anastomotic stricture. Lifelong monitoring by a multidisciplinary team is essential. CONCLUSION Limited long-term success of behavioural and pharmacologic therapies in severe obesity has led to renewed interest in bariatric surgery. Success with bariatric surgery is more likely when multidisciplinary care providers, in conjunction with primary care providers, assess, treat, monitor, and evaluate patients before and after surgery. Family physicians will play a critical role in counseling patients about bariatric surgery and will need to develop skills in managing these patients in the long-term. PMID:20841586

  6. Corrective Jaw Surgery

    Medline Plus

    Full Text Available ... to find out more. Dental Implant Surgery Dental Implant Surgery Dental implant surgery is, of course, surgery, and is ... to find out more. Dental Implant Surgery Dental Implant Surgery Dental implant surgery is, of course, surgery, and is ...

  7. Corrective Jaw Surgery

    Medline Plus

    Full Text Available ... and Craniofacial Surgery Cleft Lip/Palate and Craniofacial Surgery A cleft lip may require one or more ... find out more. Corrective Jaw Surgery Corrective Jaw Surgery Orthognathic surgery is performed to correct the misalignment ...

  8. Mohs micrographic surgery

    Science.gov (United States)

    Skin cancer - Mohs surgery; Basal cell skin cancer - Mohs surgery; Squamous cell skin cancer - Mohs surgery ... Mohs surgery usually takes place in the doctor's office. The surgery is started early in the morning and is ...

  9. Solar Panel based Milk Pasteurization

    DEFF Research Database (Denmark)

    Nielsen, Kirsten Mølgaard; Pedersen, Tom Søndergaard

    This paper treats the subject of analysis, design and development of the control system for a solar panel based milk pasteurization system to be used in small villages in Tanzania. The analysis deals with the demands for an acceptable pasteurization, the varying energy supply and the low cost, low...... complexity, simple user interface and high reliability demands. Based on these demands a concept for the pasteurization system is established and a control system is developed. A solar panel has been constructed and the energy absorption has been tested in Tanzania. Based on the test, the pasteurization...... system is dimensioned. A functional prototype of the pasteurization facility with a capacity of 200 l milk/hour has been developed and tested. The system is prepared for solar panels as the main energy source and is ready for a test in Tanzania....

  10. Solar Panel based Milk Pasteurization

    DEFF Research Database (Denmark)

    Nielsen, Kirsten Mølgaard; Pedersen, Tom Søndergaard

    2002-01-01

    This paper treats the subject of analysis, design and development of the control system for a solar panel based milk pasteurization system to be used in small villages in Tanzania. The analysis deals with the demands for an acceptable pasteurization, the varying energy supply and the low cost, low...... complexity, simple user interface and high reliability demands. Based on these demands a concept for the pasteurization system is established and a control system is developed. A solar panel has been constructed and the energy absorption has been tested in Tanzania. Based on the test, the pasteurization...... system is dimensioned. A functional prototype of the pasteurization facility with a capacity of 200 l milk/hour has been developed and tested. The system is prepared for solar panels as the main energy source and is ready for a test in Tanzania....

  11. Documentation of Appliances & Interaction Devices

    DEFF Research Database (Denmark)

    2004-01-01

    The interaction devices and appliances explored in the WorkSPACE project, address spatial computing in the context of work. We have developed and explored a range of appliances and interaction devices. The scope has been to develop tools for support of collaboration by mixing digital and physical...... materials and environments. This has been done by the use of existing hardware technologies in novel combinations, controlled and mediated in the software applications we have developed. These developments, (the SpacePanel, the TagTable and ProjecTable , the SitePack and the software application Topos...

  12. Solar Panel based Milk Pasteurization

    DEFF Research Database (Denmark)

    Nielsen, Kirsten Mølgaard; Pedersen, Tom Søndergaard

    2002-01-01

    This paper treats the subject of analysis, design and development of the control system for a solar panel based milk pasteurization system to be used in small villages in Tanzania. The analysis deals with the demands for an acceptable pasteurization, the varying energy supply and the low cost, low...... system is dimensioned. A functional prototype of the pasteurization facility with a capacity of 200 l milk/hour has been developed and tested. The system is prepared for solar panels as the main energy source and is ready for a test in Tanzania....

  13. A review of sensing technologies for small and large-scale touch panels

    Science.gov (United States)

    Akhtar, Humza; Kemao, Qian; Kakarala, Ramakrishna

    2017-06-01

    A touch panel is an input device for human computer interaction. It consists of a network of sensors, a sampling circuit and a micro controller for detecting and locating a touch input. Touch input can come from either finger or stylus depending upon the type of touch technology. These touch panels provide an intuitive and collaborative workspace so that people can perform various tasks with the use of their fingers instead of traditional input devices like keyboard and mouse. Touch sensing technology is not new. At the time of this writing, various technologies are available in the market and this paper reviews the most common ones. We review traditional designs and sensing algorithms for touch technology. We also observe that due to its various strengths, capacitive touch will dominate the large-scale touch panel industry in years to come. In the end, we discuss the motivation for doing academic research on large-scale panels.

  14. 76 FR 22805 - Medical Devices; Reclassification of the Topical Oxygen Chamber for Extremities

    Science.gov (United States)

    2011-04-25

    ... from a device classification panel (an FDA advisory committee); (2) published the panel's... evidence'' in the classification process to determine the level of regulation for devices. For the purpose... retrospective) reported safe use and adequate healing of wounds using the TOCE. In addition, FDA has evaluated...

  15. 78 FR 9010 - Dental Devices; Reclassification of Temporary Mandibular Condyle Prosthesis

    Science.gov (United States)

    2013-02-07

    .... FDA-2012-N-1239] Dental Devices; Reclassification of Temporary Mandibular Condyle Prosthesis AGENCY... condyle prostheses into class III, based on the recommendation of a Dental Products Panel (the Panel... mandibular condyle prosthesis is a device that is intended to be implanted in the human jaw to replace the...

  16. Solar panel truss mounting systems and methods

    Energy Technology Data Exchange (ETDEWEB)

    Al-Haddad, Tristan Farris; Cavieres, Andres; Gentry, Russell; Goodman, Joseph; Nolan, Wade; Pitelka, Taylor; Rahimzadeh, Keyan; Brooks, Bradley; Lohr, Joshua; Crooks, Ryan; Porges, Jamie; Rubin, Daniel

    2018-01-30

    An exemplary embodiment of the present invention provides a solar panel truss mounting system comprising a base and a truss assembly coupled to the base. The truss assembly comprises a first panel rail mount, second panel rail mount parallel to the first panel rail mount, base rail mount parallel to the first and second panel rail mounts, and a plurality of support members. A first portion of the plurality of support members extends between the first and second panel rail mounts. A second portion of the plurality of support members extends between the first panel rail mount and the base rail mount. A third portion of the plurality of support members extends between the second panel rail mount and the base rail mount. The system can further comprise a plurality of connectors for coupling a plurality of photovoltaic solar panels to the truss assembly.

  17. Solar panel truss mounting systems and methods

    Science.gov (United States)

    Al-Haddad, Tristan Farris; Cavieres, Andres; Gentry, Russell; Goodman, Joseph; Nolan, Wade; Pitelka, Taylor; Rahimzadeh, Keyan; Brooks, Bradley; Lohr, Joshua; Crooks, Ryan; Porges, Jamie; Rubin, Daniel

    2015-10-20

    An exemplary embodiment of the present invention provides a solar panel truss mounting system comprising a base and a truss assembly coupled to the base. The truss assembly comprises a first panel rail mount, second panel rail mount parallel to the first panel rail mount, base rail mount parallel to the first and second panel rail mounts, and a plurality of support members. A first portion of the plurality of support members extends between the first and second panel rail mounts. A second portion of the plurality of support members extends between the first panel rail mount and the base rail mount. A third portion of the plurality of support members extends between the second panel rail mount and the base rail mount. The system can further comprise a plurality of connectors for coupling a plurality of photovoltaic solar panels to the truss assembly.

  18. Flat display panel in liquid crystal technology

    Science.gov (United States)

    Steinbeck, J.; Schiekel, M.; Unbehaun, R.; Herzog, H. J.; Haeberle, G.; Biskupek, R.

    1980-06-01

    Liquid crystal display panels were built using matrix configurations. With predeformed liquid crystal structures, steep electro-optic characteristics, and small on-off switching ratios, electrically controllable birefringence is obtainable. This allows the addressing of projection color matrix displays with up to 90 scanned lines in a two color representation and up to 40 lines in a four color representation at a rate of 50 frames per sec. The same holds for predeformed liquid crystals having the advantage of low operating voltages, such as commercially available CMOS IC's Matrix displays with 32 x 32 and 80 x 80 picture elements with the corresponding electronic addressing devices for projection images with controllable color were assembled. Using these twisted nematic (TN) liquid crystal displays, the possibility of color switching filters in a sequential color selection mode was investigated. An experimental setup consisting of a CRT with two color phosphor screen, a color switching filter with a TN cell, and on electronic addressing device for the synchronized switching of image signals and of the corresponding colors is described.

  19. 2010 Panel on the Biomaterials Grand Challenges

    Science.gov (United States)

    Reichert, William “Monty”; Ratner, Buddy D.; Anderson, James; Coury, Art; Hoffman, Allan S.; Laurencin, Cato T.; Tirrell, David

    2014-01-01

    In 2009, the National Academy for Engineering issued the Grand Challenges for Engineering in the 21st Century comprised of 14 technical challenges that must be addressed to build a healthy, profitable, sustainable, and secure global community (http://www.engineeringchallenges.org). Although crucial, none of the NEA Grand Challenges adequately addressed the challenges that face the biomaterials community. In response to the NAE Grand Challenges, Monty Reichert of Duke University organized a panel entitled Grand Challenges in Biomaterials at the at the 2010 Society for Biomaterials Annual Meeting in Seattle. Six members of the National Academies—Buddy Ratner, James Anderson, Allan Hoffman, Art Coury, Cato Laurencin, and David Tirrell—were asked to propose a grand challenge to the audience that, if met, would significantly impact the future of biomaterials and medical devices. Successfully meeting these challenges will speed the 60-plus year transition from commodity, off-the-shelf biomaterials to bioengineered chemistries, and biomaterial devices that will significantly advance our ability to address patient needs and also to create new market opportunities. PMID:21171147

  20. Bariatric surgery

    Directory of Open Access Journals (Sweden)

    Alojz Pleskovič

    2013-07-01

    Full Text Available Background: In almost six decades different surgical techniques have been developed to treat patients with morbid obesity. Various surgical techniques are generally divided with respect to their effect into restrictive, malabsorbtive and humoral and a combination of these. Surgically modified human metabolism ameliorates metabolic diseases, particularly diabetes, even in nonobese patients. The understanding of metabolic effects changed the traditional paradigm of bariatric surgery from simple weight-loss procedure to metabolic surgery affecting whole-body metabolism. Proper surgical technique for individual patient is the most important factor influencing long- term results, comorbidities and quality of life. Recommendations for patient selection, surgical methods and pre- and postoperative patient management are to be respected. Metabolic surgery principles and current concepts are presented.

  1. Risk-based decisionmaking (Panel)

    Energy Technology Data Exchange (ETDEWEB)

    Smith, T.H.

    1995-12-31

    By means of a panel discussion and extensive audience interaction, explore the current challenges and progress to date in applying risk considerations to decisionmaking related to low-level waste. This topic is especially timely because of the proposed legislation pertaining to risk-based decisionmaking and because of the increased emphasis placed on radiological performance assessments of low-level waste disposal.

  2. Mobile response in web panels

    NARCIS (Netherlands)

    de Bruijne, M.A.; Wijnant, A.

    2014-01-01

    This article investigates unintended mobile access to surveys in online, probability-based panels. We find that spontaneous tablet usage is drastically increasing in web surveys, while smartphone usage remains low. Further, we analyze the bias of respondent profiles using smartphones and tablets

  3. Panel: RFID Security and Privacy

    Science.gov (United States)

    Fu, Kevin

    The panel on RFID security and privacy included Ross Anderson, Jon Callas, Yvo Desmedt, and Kevin Fu. Topics for discussion included the "chip and PIN" EMV payment systems, e-Passports, "mafia" attacks, and RFID-enabled credit cards. Position papers by the panelists appear in the following pages, and the RFID-enabled credit card work appears separately in these proceedings.

  4. The PPP: Problem Panel Project.

    Science.gov (United States)

    Crawford, Russell K.

    The Problem Panel Project is an instructor-developed, one-semester course in contemporary problems. Based on the inquiry approach, the course is structured for independent research and group work and requires no traditionally-structured daily lesson plans. The course is divided into six procedural points. First, students decide which contemporary…

  5. NAS Panel faults export controls

    Science.gov (United States)

    Katzoff, Judith A.

    A study prepared by a top-level panel says that current export controls on militarily sensitive U.S. technology may be “overcorrecting” previous weaknesses in that system, resulting in “a complex and confusing control system” that makes it more difficult for U.S. businesses to compete in international markets. Moreover, this control system has “an increasingly corrosive effect” on U.S. relations with allies. The panel recommended that the United States concentrate more effort on bringing about uniformity in the export control policies of countries belonging to the Coordinating Committee on Multilateral Export Controls (CoCom), i.e., most of the member nations in NATO (the North Atlantic Treaty Organization) and Japan.The 21-member panel was appointed by the Committee on Science, Engineering, and Public Policy (COSEPUP), a joint unit of the National Academy of Sciences (NAS), the National Academy of Engineering (NAE), and the Institute of Medicine (IOM). The panel, composed of administrators, researchers, and former government officials, was chaired by AGU member Lew Allen, Jr., director of the Jet Propulsion Laboratory (Pasadena, Calif.) and former chief of staff of the U.S. Air Force. Their report was supported by NAS funds, by a number of private organizations (including AGU), by the U.S. Departments of Commerce, Defense, Energy, and State, by the National Science Foundation, and by the National Aeronautics and Space Administration.

  6. ASIST 2003: Part II: Panels.

    Science.gov (United States)

    Proceedings of the ASIST Annual Meeting, 2003

    2003-01-01

    Forty-six panels address topics including women in information science; users and usability; information studies; reference services; information policies; standards; interface design; information retrieval; information networks; metadata; shared access; e-commerce in libraries; knowledge organization; information science theories; digitization;…

  7. Panel Smooth Transition Regression Models

    DEFF Research Database (Denmark)

    González, Andrés; Terasvirta, Timo; Dijk, Dick van

    models to the panel context. The strategy consists of model specification based on homogeneity tests, parameter estimation, and model evaluation, including tests of parameter constancy and no remaining heterogeneity. The model is applied to describing firms' investment decisions in the presence...

  8. Nanotechnology in plastic surgery.

    Science.gov (United States)

    Ibrahim, Ahmed M S; Gerstle, Theodore L; Rabie, Amr N; Song, Yong-Ak; Melik, Rohat; Han, Jongyoon; Lin, Samuel J

    2012-12-01

    Nanotechnology has made inroads over time within surgery and medicine. Translational medical devices and therapies based on nanotechnology are being developed and put into practice. In plastic surgery, it is anticipated that this new technology may be instrumental in the future. Microelectromechanical systems are one form of nanotechnology that offers the ability to develop miniaturized implants for use in the treatment of numerous clinical conditions. The authors summarize their published preliminary findings regarding a microelectromechanical systems-based electrochemical stimulation method through modulation of ions around the nerve that is potentially implantable and clinically efficacious, and expand upon current and potential usages of nanotechnology in plastic surgery. Sciatic nerves (n = 100) of 50 American bullfrogs were placed on a microfabricated planar gold electrode array and stimulated electrically. Using Ca(2+)-selective membranes, ion concentrations were modulated around the nerve environment in situ. In addition, a comprehensive review of the literature was performed to identify all available data pertaining to the use of nanotechnology in medicine. A 40 percent reduction of the electrical threshold value was observed using the Ca(2+) ion-selective membrane. The uses of nanotechnology specifically applicable to plastic surgery are detailed. Nanotechnology may likely lead to advancements in the art and science of plastic surgery. Using microelectromechanical systems nanotechnology, the authors have demonstrated a novel means of modulating the activation of nerve impulses. These findings have potentially significant implications for the design of special nano-enhanced materials that can be used to promote healing, control infection, restore function, and aid nerve regeneration and rehabilitation.

  9. Cosmetic surgery.

    OpenAIRE

    Harris, D. L.

    1989-01-01

    The psychotherapeutic nature of cosmetic surgery is emphasised by outlining the range of symptoms from which patients suffer and by explaining the sequence of psychological reactions which cause them. The principles which govern the selection of patients are defined. A brief account of each of the main cosmetic operations is given together with notes on their limitations and risks.

  10. GENERAL SURGERY

    African Journals Online (AJOL)

    Summary: The multidisciplinary management of Breast Cancer (BC) has evolved over the past 50 years: the patient is offered a choice of .... Choice of procedure. – For women with early BC, there is essentially a choice between 2 procedures: mastectomy or breast conserving surgery with radiation (BCT). The standard.

  11. GENERAL SURGERY

    African Journals Online (AJOL)

    Schwab , using a three-phase approach.5 In 1998, Moore et al. extended the concept and described the five-stage approach.6. The aim of damage control surgery is to prevent severely injured patients from developing the “lethal triad” of hypothermia, coagulopathy and worsening acidosis, as this confers a dismal prognosis ...

  12. GENERAL SURGERY

    African Journals Online (AJOL)

    We plan to protocolise earlier surgery and blood conservation strategies intraoperatively in addition to a restrictive strategy in ..... Marshall JC. Review Transfusion trigger: when to transfuse? Crit Care. 2004;8(Suppl 2):S31-3. 11. Hofmann A, Farmer S, Towler SC. Strategies to preempt and reduce the use of blood products: ...

  13. Cosmetic Surgery

    Science.gov (United States)

    ... http://www.mayoclinic.com/health/cosmetic-surgery/SN00006 Medical Tourism (Copyright © American Society of Plastic Surgeons) — People considering ... in exotic vacation spots. This publication talks about "medical tourism" and whether it's safe. http://www.plasticsurgery.org/ ...

  14. GENERAL SURGERY

    African Journals Online (AJOL)

    Department of Surgery, University of Cape Town Health Sciences Faculty, Groote Schuur Hospital, Observatory, Cape Town,. South Africa ... included all district, regional and tertiary hospitals in the nine provinces. Clinics and so-called ..... large contingency of senior general surgeons from countries such as Cuba, who have ...

  15. GENERAL SURGERY

    African Journals Online (AJOL)

    after pancreaticoduodenectomy for pancreatic ductal adenocarcinoma. J Surg Oncol. 2016;113(2):188-193. http:// dx.doi.org/10.1002/jso.24125. 2. Wente MN, Veit JA, Bassi C, et al. Postpancreatectomy hemorrhage (PPH): An international study group of pancreatic surgery (ISGPS) definition. Surg. 2007;142(1):20-25. http://.

  16. Metabolic Surgery

    DEFF Research Database (Denmark)

    Pareek, Manan; Schauer, Philip R; Kaplan, Lee M

    2018-01-01

    the superiority of surgery over medical treatment alone in achieving improved glycemic control, as well as a reduction in cardiovascular risk factors. The mechanisms seem to extend beyond the magnitude of weight loss alone and include improvements in incretin profiles, insulin secretion, and insulin sensitivity...

  17. TRAUMA SURGERY

    African Journals Online (AJOL)

    deaths due to other trauma types (gunshot wounds, road traffic fatalities and assault) ... the axillary artery was ligated during surgery. Type of ... Left axillary artery. Ischaemic left upper limb. 3. Fifth intercostal space on the left. Bilateral pneumothorax and haemothorax still present at autopsy. (intercostal drain only inserted on ...

  18. Mycobacterium chimaera left ventricular assist device infections.

    Science.gov (United States)

    Balsam, Leora B; Louie, Eddie; Hill, Fred; Levine, Jamie; Phillips, Michael S

    2017-06-01

    A global outbreak of invasive Mycobacterium chimaera infections after cardiac surgery has recently been linked to bioaerosols from contaminated heater-cooler units. The majority of cases have occurred after valvular surgery or aortic graft surgery and nearly half have resulted in death. To date, infections in patients with left ventricular assist devices (LVADs) have not been characterized in the literature. We report two cases of device-associated M. chimaera infection in patients with continuous-flow LVADs and describe challenges related to diagnosis and management in this population. © 2017 Wiley Periodicals, Inc.

  19. Carotid artery surgery

    Science.gov (United States)

    Carotid endarterectomy; CAS surgery; Carotid artery stenosis - surgery; Endarterectomy - carotid artery ... through the catheter around the blocked area during surgery. Your carotid artery is opened. The surgeon removes ...

  20. The Role of a Mental Model in Learning to Operate a Device.

    Science.gov (United States)

    Kieras, David E.; Bovair, Susan

    1984-01-01

    Describes three studies concerned with learning to operate a control panel device and how this learning is affected by understanding a device model that describes its internal mechanism. Results indicate benefits of a device model depend on whether it supports direct inference of exact steps required to operate the device. (Author/MBR)

  1. Fusion devices

    International Nuclear Information System (INIS)

    Fowler, T.K.

    1977-01-01

    Three types of thermonuclear fusion devices currently under development are reviewed for an electric utilities management audience. Overall design features of laser fusion, tokamak, and magnetic mirror type reactors are described and illustrated. Thrusts and trends in current research on these devices that promise to improve performance are briefly reviewed. Twenty photographs and drawings are included

  2. Incore instrument device

    International Nuclear Information System (INIS)

    Sakima, Naoki

    1996-01-01

    An incore instrument device has an integrally disposed touch panel having a function of displaying an operation indication method such as for setting of conditions for incore measurement and information processing and results of the incore measurement and a function capable of conducting operation indication such as for setting conditions and information processing for incore measurement relative to a control section upon touching an information position on a displayed information. In addition, an information processing section comprising a man-machine function program formed so as to recognize the content of the operation indication for the incore measurement by touching and let the control section to conduct it is disposed to the outside by way of a communication interface. In addition, a programming device is disposed for forming and rewriting the program of the man-machine function relative to the information processing section. Then, when various indication operations are conducted upon performing incore measurement, a view point can be concentrated to one predetermined point thereby enabling to improve the operationability without danger. In addition, the programming of the man-machine function does not apply unnecessary load to the control section in the incore instrumentation device. (N.H.)

  3. Installation package for concentrating solar collector panels

    Science.gov (United States)

    1978-01-01

    The concentrating solar collector panels comprise a complete package array consisting of collector panels using modified Fresnel prismatic lenses for a 10 to 1 concentrating ratio, supporting framework, fluid manifolding and tracking drive system, and unassembled components for field erection.

  4. Retaining Ring Fastener for Solar Panels

    Science.gov (United States)

    Wilson, A. H.

    1983-01-01

    Simple articulating linkage secures solar panels into supporting framework. Five element linkage collapses into W-shape for easy placement into framework, then expands to form rectangle of same dimensions as those of panel.

  5. El Salvador - Rural Electrification - Solar Panels

    Data.gov (United States)

    Millennium Challenge Corporation — This is a summative qualitative performance evaluation (PE) of the solar panel component of the solar panel component of the RE Sub-Activity. The final report will...

  6. B-cell leukemia/lymphoma panel

    Science.gov (United States)

    ... ency/article/003518.htm B-cell leukemia/lymphoma panel To use the sharing features on this page, please enable JavaScript. B-cell leukemia/lymphoma panel is a blood test that looks for certain ...

  7. PLASMA DEVICE

    Science.gov (United States)

    Gow, J.D.; Wilcox, J.M.

    1961-12-26

    A device is designed for producing and confining highenergy plasma from which neutrons are generated in copious quantities. A rotating sheath of electrons is established in a radial electric field and axial magnetic field produced within the device. The electron sheath serves as a strong ionizing medium to gas introdueed thereto and also functions as an extremely effective heating mechanism to the resulting plasma. In addition, improved confinement of the plasma is obtained by ring magnetic mirror fields produced at the ends of the device. Such ring mirror fields are defined by the magnetic field lines at the ends of the device diverging radially outward from the axis of the device and thereafter converging at spatial annular surfaces disposed concentrically thereabout. (AFC)

  8. 76 FR 80949 - Request for Nominations for Voting Members on Public Advisory Panels or Committees

    Science.gov (United States)

    2011-12-27

    ... site at http://www.fda.gov/AdvisoryCommittees/default.htm . FOR FURTHER INFORMATION CONTACT: For..., biomedical engineers or microbiologists/infection control practitioners or experts. Microbiology Devices..., gynecological oncology, operative hysteroscopy, pelviscopy, electrosurgery, laser surgery, assisted reproductive...

  9. Grounds of two positions photovoltaic panels

    OpenAIRE

    Castán Fortuño, Fernando

    2008-01-01

    The objective of this Master Thesis is to find the optimum positioning for a two positions photovoltaic panel. Hence, it will be implemented a model in order to optimize the energy of the sun that the photovoltaic panel is receiving by its positioning. Likewise this project will include the comparison with other photovoltaic panel systems as the single position photovoltaics panels. Ultimately, it is also going to be designed a system array for the optimized model of two positions photovoltai...

  10. Control panel for CMC 8080 crate controller

    International Nuclear Information System (INIS)

    Masayuki Inokuchi

    1978-01-01

    The main features of Control Panel for CAMAC Crate Controller CMC 8080 are described. The control panel can be directly connected with CRATE CONTROLLER's front panel connector with a 50 lines cable without any changes in CMC 8080 system circuits. (author)

  11. 76 FR 8848 - Disciplinary Appeals Board Panel

    Science.gov (United States)

    2011-02-15

    ... AFFAIRS Disciplinary Appeals Board Panel AGENCY: Department of Veterans Affairs. ACTION: Notice with... constitute the Disciplinary Appeals Board Panel from which Board members in a case are appointed. This notice announces that the roster of employees on the Panel is available for review and comment. Employees, employee...

  12. 21 CFR 660.3 - Reference panel.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Reference panel. 660.3 Section 660.3 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) BIOLOGICS... § 660.3 Reference panel. A Reference Hepatitis B Surface Antigen Panel shall be obtained from the Center...

  13. 78 FR 56941 - Meetings of Humanities Panel

    Science.gov (United States)

    2013-09-16

    ... ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: National Endowment for the Humanities... (5 U.S.C. App.), notice is hereby given that seventeen meetings of the Humanities Panel will be held during October, 2013 as follows. The purpose of the meetings is for panel review, discussion, evaluation...

  14. 32 CFR 724.103 - NDRB panel.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 5 2010-07-01 2010-07-01 false NDRB panel. 724.103 Section 724.103 National... Definitions § 724.103 NDRB panel. An element of the NDRB, consisting of five members, authorized to review discharges. In plenary review session, an NDRB panel acts with the authority delegated by the Secretary of...

  15. 77 FR 71873 - Disciplinary Appeals Board Panel

    Science.gov (United States)

    2012-12-04

    ... AFFAIRS Disciplinary Appeals Board Panel AGENCY: Department of Veterans Affairs. ACTION: Notice with... constitute the Disciplinary Appeals Board Panel from which Board members in a case are appointed. This notice announces that the roster of employees on the Panel is available for review and comment. Employees, employee...

  16. 78 FR 69455 - Meetings of Humanities Panel

    Science.gov (United States)

    2013-11-19

    ... ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: National Endowment for the Humanities... (5 U.S.C. App.), notice is hereby given that twelve meetings of the Humanities Panel will be held during December, 2013 as follows. The purpose of the meetings is for panel review, discussion, evaluation...

  17. 76 FR 77327 - Disciplinary Appeals Board Panel

    Science.gov (United States)

    2011-12-12

    ... AFFAIRS Disciplinary Appeals Board Panel AGENCY: Department of Veterans Affairs. ACTION: Notice with... constitute the Disciplinary Appeals Board Panel from which Board members in a case are appointed. This notice announces that the roster of employees on the Panel is available for review and comment. Employees, employee...

  18. 75 FR 26285 - Meetings of Humanities Panel

    Science.gov (United States)

    2010-05-11

    ... THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the... Panels will be held at the Old Post Office, 1100 Pennsylvania Avenue, NW., Washington, DC 20506. FOR... on (202) 606-8282. SUPPLEMENTARY INFORMATION: The proposed meetings are for the purpose of panel...

  19. 75 FR 6729 - Meetings of Humanities Panel

    Science.gov (United States)

    2010-02-10

    ... ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities... (Pub. L. 92-463, as amended), notice is hereby given that the following meetings of Humanities Panels.... SUPPLEMENTARY INFORMATION: The proposed meetings are for the purpose of panel review, discussion, evaluation and...

  20. 76 FR 56242 - Meetings of Humanities Panel

    Science.gov (United States)

    2011-09-12

    ... THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities, The National Foundation on the Arts and the Humanities. ACTION: Cancellation of panel meeting. Notice is hereby given of the cancellation of the following meeting of the Humanities Panel at the Old...

  1. 38 CFR 19.11 - Reconsideration panel.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Reconsideration panel. 19... Reconsideration panel. (a) Assignment of Members. When a motion for reconsideration is allowed, the Chairman will assign a panel of three or more Members of the Board, which may include the Chairman, to conduct the...

  2. 75 FR 80082 - Meetings of Humanities Panel

    Science.gov (United States)

    2010-12-21

    ... THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the... Panels will be held at the Old Post Office, 1100 Pennsylvania Avenue, NW., Washington, DC 20506. FOR... on (202) 606-8282. SUPPLEMENTARY INFORMATION: The proposed meetings are for the purpose of panel...

  3. 78 FR 74175 - Meetings of Humanities Panel

    Science.gov (United States)

    2013-12-10

    ... ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: National Endowment for the Humanities... (5 U.S.C. App.), notice is hereby given that three meetings of the Humanities Panel will be held during January 2014 as follows. The purpose of the meetings is for panel review, discussion, evaluation...

  4. 75 FR 3491 - Meetings of Humanities Panel

    Science.gov (United States)

    2010-01-21

    ... THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the... Panels will be held at the Old Post Office, 1100 Pennsylvania Avenue, NW., Washington, DC 20506. FOR... INFORMATION: The proposed meetings are for the purpose of panel review, discussion, evaluation and...

  5. 76 FR 77559 - Meeting of Humanities Panel

    Science.gov (United States)

    2011-12-13

    ... THE ARTS AND THE HUMANITIES Meeting of Humanities Panel AGENCY: The National Endowment for the... Act (Pub. L. 92-463, as amended), notice is hereby given that a meeting of the Humanities Panel will.... SUPPLEMENTARY INFORMATION: The purpose of this Humanities Panel meeting is to advise the Endowment on its...

  6. 76 FR 52697 - Meetings of Humanities Panel

    Science.gov (United States)

    2011-08-23

    ... ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities... (Pub. L. 92-463, as amended), notice is hereby given that the following meetings of Humanities Panels.... SUPPLEMENTARY INFORMATION: The proposed meetings are for the purpose of panel review, discussion, evaluation and...

  7. 76 FR 41826 - Meetings of Humanities Panel

    Science.gov (United States)

    2011-07-15

    ... ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities... Humanities Panel will be held at the Old Post Office, 1100 Pennsylvania Avenue, NW., Washington, DC 20506... on (202) 606-8282. SUPPLEMENTARY INFORMATION: The proposed meeting is for the purpose of panel review...

  8. 77 FR 48552 - Meetings of Humanities Panel

    Science.gov (United States)

    2012-08-14

    ... ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: National Endowment for the Humanities... (5 U.S.C. App.), notice is hereby given that 10 meetings of the Humanities Panel will be held during September 2012 as follows. The purpose of the meetings is for panel review, discussion, evaluation, and...

  9. 78 FR 22345 - Meetings of Humanities Panel

    Science.gov (United States)

    2013-04-15

    ... ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: National Endowment for the Humanities... meetings of the Humanities Panel will be held during May, 2013 as follows. The purpose of the meetings is for panel review, discussion, evaluation, and recommendation of applications for financial assistance...

  10. 76 FR 70168 - Meetings of Humanities Panel

    Science.gov (United States)

    2011-11-10

    ... ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities... Humanities Panel will be held at the Old Post Office, 1100 Pennsylvania Avenue NW., Washington, DC 20506. FOR... on (202) 606-8282. SUPPLEMENTARY INFORMATION: The proposed meeting is for the purpose of panel review...

  11. 76 FR 6828 - Meetings of Humanities Panel

    Science.gov (United States)

    2011-02-08

    ... THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the... Panels will be held at the Old Post Office, 1100 Pennsylvania Avenue, NW., Washington, DC 20506. FOR... on (202) 606-8282. SUPPLEMENTARY INFORMATION: The proposed meetings are for the purpose of panel...

  12. 77 FR 17102 - Meetings of Humanities Panel

    Science.gov (United States)

    2012-03-23

    ... THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities, National Foundation on the Arts and the Humanities ACTION: Cancellation of Panel Meeting. Notice is hereby given of the cancellation of the following meeting of the Humanities Panel at the Old Post...

  13. 76 FR 20375 - Meetings of Humanities Panel

    Science.gov (United States)

    2011-04-12

    ... ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: The National Endowment for the Humanities... Humanities Panel will be held at the Old Post Office, 1100 Pennsylvania Avenue, NW., Washington, DC 20506... on (202) 606-8282. SUPPLEMENTARY INFORMATION: The proposed meeting is for the purpose of panel review...

  14. 76 FR 63664 - Arts Advisory Panel

    Science.gov (United States)

    2011-10-13

    ... Arts Advisory Panel Pursuant to Section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), as amended, notice is hereby given that thirteen meetings of the Arts Advisory Panel to the National... States Code. Any person may observe meetings, or portions thereof, of advisory panels that are open to...

  15. Keuringspanele ("Screening Panels") as Gepaste ...

    African Journals Online (AJOL)

    Several objections have been raised by critics in this regard, for instance, a screening panel infringes on: the right of equal protection/the right of access to the courts/the right to a jury trial/the right to a due process as well as on the trias politica doctrine. These so-called infringements are attended to and eventually a positive ...

  16. Panel 4 - applications to transportation

    Energy Technology Data Exchange (ETDEWEB)

    Nichols, F. [Argonne National Lab., IL (United States); Au, J. [Sundstrand Aerospace, Rockford, IL (United States); Bhattacharya, R. [Universal Energy Systems, Inc., Dayton, OH (United States); Bhushan, B. [Ohio State Univ., Columbus (United States); Blunier, D. [Caterpillar, Inc., Peoria, IL (United States); Boardman, B. [Deere & Co., Moline, IL (United States); Brombolich, L. [Compu-Tec Engineering, Chesterfield, MO (United States); Davidson, J. [Vanderbilt Univ., Nashville, TN (United States); Graham, M. [Northwestern Univ., Evanston, IL (United States); Hakim, N. [Detroit Diesel Corp., MI (United States); Harris, K. [Dubbeldee Harris Diamond Corp., Mt. Arlington, NJ (United States); Hay, R. [Norton Diamond Film, Northboro, MA (United States); Herk, L. [Southwest Research Inst., Southfield, MI (United States); Hojnacki, H.; Rourk, D. [Intelligent Structures Incorporated, Canton, MI (United States); Kamo, R. [Adiabatics, Inc., Columbus, IN (United States); Nieman, B. [Allied-Signal Inc., Des Plaines, IL (United States); O`Neill, D. [3M, St. Paul, MN (United States); Peterson, M.B. [Wear Sciences, Arnold, MD (United States); Pfaffenberger, G. [Allison Gas Turbine, Indianapolis, IN (United States); Pryor, R.W. [Wayne State Univ., Detroit, MI (United States); Russell, J. [Superconductivity Publications, Inc., Somerset, NJ (United States); Syniuta, W. [Advanced Mechanical Technology, Inc., Newton, MA (United States); Tamor, M. [Ford Motor Co., Dearborn, MI (United States); Vojnovich, T. [Dept. of Energy, Washington, DC (United States); Yarbrough, W. [Pennsylvania State Univ., University Park (United States); Yust, C.S. [Oak Ridge National Lab., TN (United States)

    1993-01-01

    The aim of this group was to compile a listing of current and anticipated future problem areas in the transportation industry where the properties of diamond and DLC films make them especially attractive and where the panel could strongly endorse the establishment of DOE/Transportation Industry cooperative research efforts. This section identifies the problem areas for possible applications of diamond/DLC technology and presents indications of current approaches to these problems.

  17. Report of the Microbiology Panel

    OpenAIRE

    Barenkamp, Stephen J.; Chonmaitree, Tasnee; Hakansson, Anders P.; Heikkinen, Terho; King, Samantha; Nokso-Koivisto, Johanna; Novotny, Laura A.; Patel, Janak A.; Pettigrew, Melinda; Swords, W. Edward

    2017-01-01

    Objective. To perform a comprehensive review of the literature from July 2011 until June 2015 on the virology and bacteriology of otitis media in children. Data Sources. PubMed database of the National Library of Medicine. Review Methods. Two subpanels comprising experts in the virology and bacteriology of otitis media were created. Each panel reviewed the relevant literature in the fields of virology and bacteriology and generated draft reviews. These initial reviews were distributed to all ...

  18. Corrective Jaw Surgery

    Medline Plus

    Full Text Available ... and Craniofacial Surgery A cleft lip may require one or more surgeries depending on the extent of ... and Craniofacial Surgery A cleft lip may require one or more surgeries depending on the extent of ...

  19. Corrective Jaw Surgery

    Medline Plus

    Full Text Available ... to find out more. Facial Cosmetic Surgery Facial Cosmetic Surgery Extensive education and training in surgical procedures ... to find out more. Facial Cosmetic Surgery Facial Cosmetic Surgery Extensive education and training in surgical procedures ...

  20. Tennis elbow surgery - discharge

    Science.gov (United States)

    Lateral epicondylitis surgery - discharge; Lateral tendinosis surgery - discharge; Lateral tennis elbow surgery - discharge ... Soon after surgery, severe pain will decrease, but you may have mild soreness for 3 to 6 months.

  1. Corrective Jaw Surgery

    Medline Plus

    Full Text Available ... to find out more. Facial Cosmetic Surgery Facial Cosmetic Surgery Extensive education and training in surgical procedures involving ... to find out more. Facial Cosmetic Surgery Facial Cosmetic Surgery Extensive education and training in surgical procedures involving ...

  2. Orthognathic Surgery

    DEFF Research Database (Denmark)

    Kjærgaard Larsen, Marie; Thygesen, Torben Henrik

    2016-01-01

    on the level of satisfaction was studied. The social-networking web site Facebook was used to identify the study population. An online questionnaire was performed using the website SurveyMonkey. In all, 105 (9%) respondents from the Danish Facebook group about OS, called Kaebeoperation (jaw surgery), were......The literature shows that the indications for orthognathic surgery (OS) are often functional problems and unsatisfactory facial esthetics. This study investigated the esthetic outcomes and overall satisfaction following OS. Somatosensory change is a relatively common complication and its influence...... to sex, age, and somatosensory change. High satisfaction and improvement in facial esthetic after OS were seen. Young patients (16-25 years) and men indicated a higher degree of satisfaction than old (>25 years) patients and women. The use of social media seems to be an interesting platform...

  3. Cavity Control and Panel Control Strategies in Double-Panel Structures for Transmitted Noise Reduction

    NARCIS (Netherlands)

    Ho, J.; Kalverboer, J.; Berkhoff, Arthur P.

    2012-01-01

    Investigation and comparisons of the cavity control and the panel control in a double-panel structure are presented in this paper. The double-panel structure, which comprises two panels with air in the gap, provides the advantages of low sound-transmission at high frequency, low heat-transmission

  4. A method and apparatus for forming a double-curved panel from a flat panel

    NARCIS (Netherlands)

    Rietbergen, D.; Vollers, K.J.

    2008-01-01

    A method for forming a double-curved panel from a flat panel, which comprises processing a plastically deformable flat panel or rendering the flat panel plastically deformable to enable it to mould itself to a predetermined shape, wherein the shape is obtained by a primary supporting construction

  5. 78 FR 55081 - Circulatory System Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2013-09-09

    ..., and D, 620 Perry Pkwy., Gaithersburg, MD 20877. The hotel's telephone number is 301-977-8900. Contact... of the trial was to demonstrate that the time until the first event of all-cause mortality, heart... special needs. If you require special accommodations due to a disability, please contact AnnMarie Williams...

  6. 77 FR 12064 - Radiological Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2012-02-28

    ... asymptomatic dense- breasted women following a negative screening mammogram. On April 12, 2012, during session... appropriate meeting topic, the names and addresses of proposed participants, and an indication of the...

  7. 77 FR 25183 - Circulatory System Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2012-04-27

    ... guidewire and to track the bioprosthesis over the aortic arch and for crossing and positioning in the native...-dilate the native annulus) and a crimper. FDA intends to make background material available to the public... Advisory Committee Act (5 U.S.C. app. 2). Dated: April 19, 2012. Jill Hartzler Warner, Acting Associate...

  8. 76 FR 36548 - Circulatory System Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2011-06-22

    ... track the bioprosthesis over the aortic arch and for crossing and positioning in the native valve. The... native annulus) and a crimper. On July 21, 2011, the committee will discuss, make recommendations, and... Federal Advisory Committee Act (5 U.S.C. app. 2). Dated: June 15, 2011. Jill Hartzler Warner, Acting...

  9. 78 FR 13350 - Ophthalmic Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2013-02-27

    ... the Federal Register about last minute modifications that impact a previously announced advisory... eye for visual correction of aphakia and postoperative refractive astigmatism secondary to removal of... the contact person on or before April 1, 2013. Oral presentations from the public will be scheduled...

  10. 77 FR 19293 - Orthopaedic and Rehabilitation Devices Panel of the Medical Devices Advisory Committee; Meeting

    Science.gov (United States)

    2012-03-30

    ... announce the meeting location in a future Federal Register notice. We will also provide the meeting... population (Ref. 3). This peer-reviewed journal article presented the following findings regarding primary Mo... resurfacing). FDA intends to make background material available to the public no later than 2 business days...

  11. 77 FR 7589 - Neurological Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2012-02-13

    ... Stroke in Intracranial Stenosis'' (SAMMPRIS), published in the New England Journal of Medicine (2011;365... Drug Administration, 10903 New Hampshire Ave., Bldg. 66, Rm. 1535, Silver Spring, MD 20993-0002, 301...

  12. 77 FR 18829 - Gastroenterology and Urology Devices Panel of the Medical Devices Advisory Committee; Notice of...

    Science.gov (United States)

    2012-03-28

    ..., MD 20877. The hotel's telephone number is 301-977-8900. Contact Person: Avena Russell, Center for.... 1535, Silver Spring, MD 20993-0002, Avena[email protected] , 301-796-3805, or FDA Advisory Committee...

  13. 77 FR 66847 - Circulatory System Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2012-11-07

    ...: (1) Centrifugal type pumps utilize a rotor to impart energy to the blood in an extracorporeal circuit... cardiopulmonary blood pumps for use in cardiopulmonary bypass circuits for periods of up to six hours. Micro... blood pumps for use in cardiopulmonary bypass circuits for periods of up to six hours, but FDA did not...

  14. 77 FR 50701 - Radiological Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2012-08-22

    ..., sponsored by Hologic, Inc. The Selenia Dimensions 3D System is currently approved for breast cancer... synthetic 2D images from the DBT data. Hologic requests to expand the indications for use to allow the...

  15. 78 FR 66942 - Orthopaedic and Rehabilitation Devices Panel of the Medical Devices Advisory Committee; Notice of...

    Science.gov (United States)

    2013-11-07

    ... between the vertebral bodies into the disc space from L3-S1 to help provide stabilization and to help.... This notice announces a forthcoming meeting of a public advisory committee of the Food and Drug Administration (FDA). The meeting will be open to the public. Name of Committee: Orthopaedic and Rehabilitation...

  16. 76 FR 56200 - Circulatory System Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2011-09-12

    ... lesion lengths per patient of 280 mm. \\1\\ ``Fr'' stands for French. It is a term that defines the... registrants requesting to speak is greater than can be reasonably accommodated during the scheduled open... hearing session. The contact person will notify interested persons regarding their request to speak by...

  17. 77 FR 61768 - Neurological Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2012-10-11

    .../Gaithersburg, Grand Ballroom, 620 Perry Pkwy., Gaithersburg, MD 20877. The hotel's telephone number is 301-977... Washington, DC area). A notice in the Federal Register about last minute modifications that impact a... safety and effectiveness data from the ``Safety and Efficacy of NeuroFlo Technology in Ischemic Stroke...

  18. 78 FR 67365 - Circulatory System Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2013-11-12

    ... Washington DC North/Gaithersburg, Salons A, B, C, and D, 620 Perry Pkwy., Gaithersburg, MD 20877. The hotel's... notice in the Federal Register about last minute modifications that impact a previously announced... Technology. The WATCHMAN LAA Closure Technology is a percutaneously delivered permanent cardiac implant...

  19. 78 FR 21129 - Orthopaedic and Rehabilitation Devices Panel of the Medical Devices Advisory Committee; Notice of...

    Science.gov (United States)

    2013-04-09

    ... always check the Agency's Web site at http://www.fda.gov/AdvisoryCommittees/default.htm and scroll down... conditions by means other than the generation of deep heat within body tissues. On July 6, 2012 (77 FR 39953... codified language in the rule. As described in the summary of revisions in the technical amendment, FDA...

  20. 77 FR 42318 - Orthopaedic and Rehabilitation Devices Panel of the Medical Devices Advisory Committee; Notice of...

    Science.gov (United States)

    2012-07-18

    ... generally intended as an adjunct to fusion for the treatment of degenerative disc disease (as defined by..., infection, and inflammatory disorders in the cervical spine. FDA intends to make background material... accommodated during the scheduled open public hearing session, FDA may conduct a lottery to determine the...

  1. Sealing devices

    International Nuclear Information System (INIS)

    Coulson, R.A.

    1980-01-01

    A sealing device for minimising the leakage of toxic or radioactive contaminated environments through a biological shield along an opening through which a flexible component moves that penetrates the shield. The sealing device comprises an outer tubular member which extends over a length not less than the maximum longitudinal movement of the component along the opening. An inner sealing block is located intermediate the length of the component by connectors and is positioned in the bore of the outer tubular member to slide in the bore and effect a seal over the entire longitudinal movement of the component. The cross-section of the device may be circular and the block may be of polytetrafluoroethylene or of nylon impregnated with molybdenum or may be metallic. A number of the sealing devices may be combined into an assembly for a plurality of adjacent longitudinally movable components, each adapted to sustain a tensile load, providing the various drives of a master-slave manipulator. (author)

  2. Ferroelectric devices

    CERN Document Server

    Uchino, Kenji

    2009-01-01

    Updating its bestselling predecessor, Ferroelectric Devices, Second Edition assesses the last decade of developments-and setbacks-in the commercialization of ferroelectricity. Field pioneer and esteemed author Uchino provides insight into why this relatively nascent and interdisciplinary process has failed so far without a systematic accumulation of fundamental knowledge regarding materials and device development.Filling the informational void, this collection of information reviews state-of-the-art research and development trends reflecting nano and optical technologies, environmental regulat

  3. Catalytic devices

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Ming; Zhang, Xiang

    2018-01-23

    This disclosure provides systems, methods, and apparatus related to catalytic devices. In one aspect, a device includes a substrate, an electrically insulating layer disposed on the substrate, a layer of material disposed on the electrically insulating layer, and a catalyst disposed on the layer of material. The substrate comprises an electrically conductive material. The substrate and the layer of material are electrically coupled to one another and configured to have a voltage applied across them.

  4. Chronic ventricular assist device support: surgical innovation.

    Science.gov (United States)

    Rojas, Sebastian V; Hanke, Jasmin S; Haverich, Axel; Schmitto, Jan D

    2016-05-01

    Ventricular assist device (VAD) therapy is currently one of the fastest-developing fields in cardiac surgery. Consistently improved technology, research, and gain of clinical experience have established VADs as an important option for the treatment of congestive heart failure. During the past year, novel devices and less invasive surgical procedures have been revolutionizing this field. The purpose of this manuscript is to review these innovations with special emphasis on device-related surgery. Device miniaturization has enabled less invasive VAD surgery, excluding the need for full sternotomy. Recent data show that intrahospital survival rates following less invasive VAD implantation are surpassing 90%. Secondly, two new devices, Heartmate 3 and MVAD, are being applied and tested for clinical application. In this context, the Heartmate 3 CE mark study recently concluded with excellent outcomes and without any pump thrombosis or device malfunctions. The first clinical results of the newest generation of VADs are very promising compared with old-generation devices. Furthermore, less invasive surgery is becoming a standard for the implantation, exchange, or explantation of left VADs. The joint venture of improved technology and innovative surgical techniques will push this field forward to even better outcomes and reduced complication rates.

  5. High Efficiency, High Density Terrestrial Panel. [for solar cell modules

    Science.gov (United States)

    Wohlgemuth, J.; Wihl, M.; Rosenfield, T.

    1979-01-01

    Terrestrial panels were fabricated using rectangular cells. Packing densities in excess of 90% with panel conversion efficiencies greater than 13% were obtained. Higher density panels can be produced on a cost competitive basis with the standard salami panels.

  6. FLUOROSCOPY DURATION IN ORTHOPEDIC SURGERY

    Science.gov (United States)

    Salvia, Joao Caron La; de Moraes, Pablo Reis; Ammar, Tiago Yossef; Schwartsmann, Carlos Roberto

    2015-01-01

    Objective: To ascertain the mean length of radiation emission from fluoroscopic devices during several types of orthopedic surgery and which of these required greater use of radiation. Methods: The times taken to perform sixteen different types of surgery (total of 80 procedures) were measured. At the end of each procedure, the length of time for which fluoroscopy was used directly from the image intensifier was ascertained. Results: The mean time required for fluoroscopy per operation was 61 seconds. The procedures that demanded greatest mean duration of radiation use were bilateral proximal femoral epiphysiodesis (5.1 minutes) and femoral shaft osteosynthesis using a locked intramedullary nail (3.33 min). Conclusion: The mean duration of fluoroscopy use in orthopedic operations was 61 seconds. The procedures using an intramedullary device were the ones that required greatest radiation emission. PMID:27027000

  7. Damage Analysis of Aluminium Foam Panel Subjected to Underwater Shock Loading

    Directory of Open Access Journals (Sweden)

    Xuan He

    2017-01-01

    Full Text Available Underwater shock loading experiment device is the equipment which simulates underwater explosive shock wave through experiment. Underwater shock loading experiment device was used to conduct high-speed underwater impact on aluminium foam panel and its damage modes were studied in this paper. 3D dynamic DIC test system was used to collect and analyze real-time deformation of target board. After the experiment was completed, a numerical simulation of the series of experiment was conducted through ABAQUS finite element simulation and then a comparative analysis of the experiment was implemented. To comprehensively study damage modes of aluminium foam panel subjected to underwater shock loading, damage modes of aluminium foam panel at different shock speeds were studied. Results indicated that when a certain impact speed which could damage aluminium foam panel was reached, if the impact speed was low, aluminium foam panel would generate shear fracture at constrained boundary of flange; if the impact speed was high, aluminium foam panel would firstly generate fracture at the center and then generate shear fracture at constrained boundary of flange, and central fracture would generate three cracks.

  8. 2015 Occupant Protection Standing Review Panel

    Science.gov (United States)

    Steinberg, Susan

    2015-01-01

    The 2015 Occupant Protection (OP) Risk Standing Review Panel (from here on referred to as the SRP) participated in a WebEx/teleconference with members of the Space Human Factors and Habitability (SHFH) Element, representatives from the Human Research Program (HRP), NASA Headquarters, and NASA Research and Education Support Services on November 3, 2015 (list of participants is in Section VII of this report). The SRP reviewed the updated research plans for the Risk of Injury from Dynamic Loads (OP Risk). The SRP agrees that the Gaps are relevant and appropriate to mitigate the injury risk. All the appropriate and relevant Tasks have been identified to fill the Gaps. Depending upon the findings, additional tasks may need to be identified or modified. Excellent progress has been made since the 2014 SRP meeting. Publications in peer-reviewed journals validate the scientific merit of the research findings. As detailed in this report, the SRP has specific comments, guidance, and information in the following areas: human finite element modeling, human vs. surrogate dynamic responses, chest injury risk curves, matched pair testing of Test device for Human Occupant Restraint (THOR) and Hybrid III, and disc herniation risk analysis.

  9. Emergency surgery

    DEFF Research Database (Denmark)

    Stoneham, M; Murray, D; Foss, N

    2014-01-01

    undertaken on elderly patients with limited physiological reserve. National audits have reported variations in care quality, data that are increasingly being used to drive quality improvement through professional guidance. Given that the number of elderly patients presenting for emergency surgery is likely...... to rise as the population ages, this review summarises the evidence on which such guidance is based, and provides information about how anaesthetists might participate in audit and research aimed at improving local and national outcomes for these most vulnerable of patients....

  10. Interdisciplinary European Guidelines on Metabolic and Bariatric Surgery

    OpenAIRE

    Fried, Martin; Yumuk, Volkan; Oppert, Jean-Michel; Scopinaro, Nicola; Torres, Antonio J.; Weiner, Rudolf; Yashkov, Yuri; Frühbeck, Gema

    2013-01-01

    International audience; In 2012, an outstanding expert panel derived from IFSO-EC (International Federation for the Surgery of Obesity – European Chapter) and EASO (European Association for the Study of Obesity), composed by key representatives of both Societies including past and present presidents together with EASO's OMTF (Obesity Management Task Force) chair, agreed to devote the joint Medico-Surgical Workshop of both institutions to the topic of metabolic surgery as a pre-satellite of th...

  11. Microclimate boxes for panel paintings

    DEFF Research Database (Denmark)

    Wadum, Jørgen

    1998-01-01

    The use of microclimate boxes to protect vulnerable panel paintings is, therefore, not a new phenomenon of the past two or three decades. Rather, it has been a concern for conservators and curators to protect these objects of art at home and in transit since the end of the nineteenth century....... The increased number of travelling exhibitions in recent years has heightened the need to protect paintings during circulation (Thomson 1961; Mecklenburg 1991). The use and design of microclimate boxes have been evolving since 1892. These boxes may be divided into three broad groups: those using an active...

  12. Optimum design of composite panel with photovoltaic-thermo module. Absorbing effect of cooling panel; Hikari netsu fukugo panel no saiteki sekkei. Reikyaku panel no kyunetsu koka

    Energy Technology Data Exchange (ETDEWEB)

    Sato, M.; Kikuchi, S.; Tani, T. [Science University of Tokyo, Tokyo (Japan); Kadotani, K.; Imaizumi, H. [Komatsu Ltd., Tokyo (Japan)

    1996-10-27

    The composite panel with photovoltaic-thermo module becomes higher in energy-saving than the conventional air-conditioning system by the independent radiational heating and cooling effect obtained when the generating panel using a solar cell module is combined with the heating and cooling panel using a thermo-element module. The output of a solar cell module can be directly used because the solar cell module operates in AC. This paper reports the relation between the absorbed value and power consumption of the cooling panel, while paying attention to the cooling panel. The performance coefficient of the maximum absorbed value from an non-absorbing substance to a cooling panel is 2 to 3. Assume that the cooling panel during non-adiabatic operation is operated using a solar cell module of 800 W/m{sup 2} in solar intensity and 15% in conversion efficiency. The cooling-surface temperature difference is 12.12 K, and the maximum absorbed value of a non-absorbing substance to a cooling panel is 39.12 W/m{sup 2}. The absorbed value of the outer temperature to the cooling panel is 74.4 W/m{sup 2}, and each performance coefficient is 3.26 and 0.62. The absorbed value must be calculated for evaluation from the cooling-surface temperature difference measured directly from the cooling panel. 4 refs., 8 figs., 1 tab.

  13. Guide device

    International Nuclear Information System (INIS)

    Brammer, C.M. Jr.

    1977-01-01

    Disclosed is a fuel handling guide tube centering device for use in nuclear reactors during fuel assembly handling operations. The device comprises an outer ring secured to the flange of a nuclear reactor pressure vessel, a rotatable table rotatably coupled to the outer ring, and a plurality of openings through the table. Truncated locating cones are positioned in each of the openings in the table, and the locating cones center the guide tube during fuel handling operations. The openings in the table are located such that each fuel assembly in the nuclear core may be aligned with one of the openings by a suitable rotation of the table. The locating cones thereby provide alignment between the fuel handling mechanism located in the guide tube and the individual fuel assemblies of the cone. The need for a device to provide alignment is especially critical for floating nuclear power plants, where wave motion may exist during fuel handling operations. 5 claims, 4 figures

  14. Identification device

    Science.gov (United States)

    Lin, Jian-Shian; Su, Chih-Chieh; Chou, Ta-Hsin; Wu, Mount-Learn; Lai, Chieh-Lung; Hsu, Che-Lung; Lan, Hsiao-Chin; Huang, Hung-I.; Liu, Yung-Chih; Tu, Zong-Ru; Lee, Chien-Chieh; Chang, Jenq-Yang

    2007-09-01

    In this Letter, the identification device disclosed in the present invention is comprised of: a carrier and a plurality of pseudo-pixels; wherein each of the plural pseudo-pixels is formed on the carrier and is further comprised of at least a light grating composed of a plurality of light grids. In a preferred aspect, each of the plural light grids is formed on the carrier while spacing from each other by an interval ranged between 50nm and 900nm. As the aforesaid identification device can present specific colors and patterns while it is being viewed by naked eye with respect to a specific viewing angle, the identification device is preferred for security and anti-counterfeit applications since the specific colors and patterns will become invisible when it is viewed while deviating from the specific viewing angle.

  15. Aesthetic Applications of Radiofrequency Devices.

    Science.gov (United States)

    Sadick, Neil; Rothaus, Kenneth O

    2016-07-01

    Radiofrequency (RF)-based devices are used to improve face and neck laxity, a major feature of aging that until recently could only be addressed with surgery. Although these treatments are not meant to replace surgical procedures, patient satisfaction studies have been consistently high. For physicians offering these skin rejuvenation procedures, it is essential to have intimate knowledge of how the devices work, select appropriate candidates, set realistic expectations, and combine treatments to optimize outcomes. This article discusses the various noninvasive RF technologies currently in use and reviews pertinent clinical studies evaluating their efficacy and safety. Copyright © 2016 Elsevier Inc. All rights reserved.

  16. Design of Multi-core Fiber Patch Panel for Space Division Multiplexing Implementations

    DEFF Research Database (Denmark)

    Gonzalez, Luz E.; Morales, Alvaro; Rommel, Simon

    2018-01-01

    A multi-core fiber (MCF) patch panel was designed, allowing easy coupling of individual signals to and from a 7-core MCF. The device was characterized, measuring insertion loss and cross talk, finding highest insertion loss and lowest crosstalk at 1300 nm with values of 9.7 dB and -36.5 d...

  17. Microcontroller-based system for analyzing and characterizing solar panels

    International Nuclear Information System (INIS)

    Jabbar, Muhandis Abdul; Prawito

    2016-01-01

    A solar cell is one of many alternative energy which is still being developed and it works by converting sunlight into electricity. In order to use a solar cell, a deep knowledge about the solar cell’s characteristics is needed. The current and voltage (I-V) produced when the light hits the solar cell surface with a certain value of intensity and at a certain value of temperature becomes the basic study to determine solar cell characteristics. In the past decade, there were so many developments of devices to characterize solar cells and solar panels. One of them used a MOSFET device for varying electronic load to observe solar cell current and voltage responses. However, many devices which have been developed even device on the market using many expensive tools and quite complex. Therefore in this research, a simple low cost electronic controlled device for solar cell characterization is built based on MOSFET method and a microcontroller but still has high reliability and accuracy.

  18. Solar-Panel Dust Accumulation and Cleanings

    Science.gov (United States)

    2005-01-01

    Air-fall dust accumulates on the solar panels of NASA's Mars Exploration Rovers, reducing the amount of sunlight reaching the solar arrays. Pre-launch models predicted steady dust accumulation. However, the rovers have been blessed with occasional wind events that clear significant amounts of dust from the solar panels. This graph shows the effects of those panel-cleaning events on the amount of electricity generated by Spirit's solar panels. The horizontal scale is the number of Martian days (sols) after Spirit's Jan. 4, 2005, (Universal Time) landing on Mars. The vertical scale indicates output from the rover's solar panels as a fraction of the amount produced when the clean panels first opened. Note that the gradual declines are interrupted by occasional sharp increases, such as a dust-cleaning event on sol 420.

  19. Printing Device

    NARCIS (Netherlands)

    Berg, van den M.J.; Markies, P.R.; Zuilhof, H.

    2014-01-01

    An ink jetprinting device includes a pressure chamber formed by a plurality of wall segments, a first aperture extending through a wall segment and communicating with an ink jet orifice and a second aperture extending through a wall segment and communicating with an ink supply duct. The pressure

  20. Detection device

    Science.gov (United States)

    Smith, J.E.

    1981-02-27

    The present invention is directed to a detection device comprising: (1) an entrance chamber; (2) a central chamber; and (3) an exit chamber. The central chamber includes an ionizing gas, anode, and means for connecting the anode with an external power supply and pulse counter.

  1. Portable source identification device

    Science.gov (United States)

    Andersen, Eric S.; Samuel, Todd J.; Gervais, Kevin L.

    2005-05-01

    U.S. Customs and Border Protection (CBP) is the primary enforcement agency protecting the nation"s ports of entry. CBP is enhancing its capability to interdict the illicit import of nuclear and radiological materials and devices that may be used by terrorists. Pacific Northwest National Laboratory (PNNL) is providing scientific and technical support to CBP in their goal to enable rapid deployment of nuclear and radiation detection systems at U. S. ports of entry to monitor 100% of the incoming international traffic and cargo while not adversely impacting the operations or throughput of the ports. As the deployment of radiation detection systems proceeds, there is a need to adapt the baseline radiation portal monitor (RPM) system technology to operations at these diverse ports of entry. When screening produces an alarm in the primary inspection RPM, the alarming vehicle is removed from the flow of commerce and the alarm is typically confirmed in a secondary inspection RPM. The portable source identification device (PSID) is a radiation sensor panel (RSP), based on thallium-doped sodium iodide (NaI(Tl)) scintillation detector and gamma spectroscopic analysis hardware and software, mounted on a scissor lift on a small truck. The lift supports a box containing a commercial off-the-shelf (COTS) sodium iodide detector that provides real-time isotopic identification, including neutron detectors to interdict Weapons of Mass Destruction (WMD) and radiation dispersion devices (RDD). The scissor lift will lower the detectors to within a foot off the ground and raise them to approximately 24 feet (7.3 m) in the air, allowing a wide vertical scanning range.

  2. Portable Source Identification Device

    International Nuclear Information System (INIS)

    Andersen, Eric S.; Samuel, Todd J.; Gervais, Kevin L.

    2005-01-01

    U.S. Customs and Border Protection (CBP) is the primary enforcement agency protecting the nation's ports of entry. CBP is enhancing its capability to interdict the illicit import of nuclear and radiological materials and devices that may be used by terrorists. Pacific Northwest National Laboratory (PNNL) is providing scientific and technical support to CBP in their goal to enable rapid deployment of nuclear and radiation detection systems at U. S. ports of entry to monitor 100% of the incoming international traffic and cargo while not adversely impacting the operations or throughput of the ports. As the deployment of radiation detection systems proceeds, there is a need to adapt the baseline radiation portal monitor (RPM) system technology to operations at these diverse ports of entry. When screening produces an alarm in the primary inspection RPM, the alarming vehicle is removed from the flow of commerce and the alarm is typically confirmed in a secondary inspection RPM. The portable source identification device (PSID) is a radiation sensor panel (RSP), based on thallium-doped sodium iodide (NaI(Tl)) scintillation detector and gamma spectroscopic analysis hardware and software, mounted on a scissor lift on a small truck. The lift supports a box containing a commercial off-the-shelf (COTS) sodium iodide detector that provides real-time isotopic identification, including neutron detectors to interdict Weapons of Mass Destruction (WMD) and radiation dispersion devices (RDD). The scissor lift will lower the detectors to within a foot off the ground and raise them to approximately 24 feet in the air, allowing a wide vertical scanning range

  3. Solar Panel Installations on Existing Structures

    OpenAIRE

    Tim D. Sass; Pe; Leed

    2013-01-01

    The rising price of fossil fuels, government incentives and growing public aware-ness for the need to implement sustainable energy supplies has resulted in a large in-crease in solar panel installations across the country. For many sites the most eco-nomical solar panel installation uses existing, southerly facing rooftops. Adding solar panels to an existing roof typically means increased loads that must be borne by the building-s structural elements. The structural desig...

  4. Case Study - Monitoring the Photovoltaic Panels

    OpenAIRE

    PACURAR Ana Talida; TOADER Dumitru; PACURAR Cristian

    2014-01-01

    The photovoltaic cell represents one of the most dynamic and attractive way to converts renewable energy sources in electricity production. That means to convert solar energy into electricity. In this paper is presented a analogy between two types of photovoltaic panels installed, with educational role for students. Also the objective of this paper is to estimate the performance of photovoltaic panels and to provide the best solution for industry. These two types of photovoltaic panels wer...

  5. Choosing surgery

    DEFF Research Database (Denmark)

    Thorstensson, Carina; Lohmander, L; Frobell, Richard

    2009-01-01

    -depth qualitative interviews were conducted with young (aged 18-35), physically active individuals with ACL rupture who were participating in a RCT comparing training and surgical reconstruction with training only. 22/34 were randomised to training only but crossed over to surgery. Of these, 11 were interviewed...... and many patients said that they joined the RCT in order to bypass waiting lists. Patients who chose to cross-over described training as time consuming, boring and as unable to provide sufficient results within a reasonable timeframe. Some said their injured knees had given-way; others experienced new knee...... a variety of views and beliefs about those treatments, and trial participation happens in the absence of equipoise. Furthermore, opting for surgical reconstruction does not necessarily provide patients with satisfactory outcomes. Definition of successful outcome may require an individualised approach...

  6. Suboccipital neuropathy after bone conduction device placement.

    Science.gov (United States)

    Faber, H T; de Ru, J A

    2013-01-01

    To describe the clinical characteristics of a 70-year-old female with occipital neuropathy following bone conduction device surgery. A 65-year-old woman underwent bone conduction device placement surgery on the left temporal bone. Postoperatively she progressively developed chronic pain at the implantation site. The pain led to minimal neck movement, which resulted in complaints of the shoulder and arm on the left side. She was treated by an orthopaedic surgeon for a frozen shoulder. Pain medication and occipital nerve blocking had no sustained effect on the pain. Occipital neuropathy is a syndrome with continuous aching involving the occipital and parietal scalp caused by trauma or peripheral compression of the occipital nerves. The most common causes of occipital neuropathy are probably direct trauma to the nerve and hypertrophic fibrosis of subcutaneous tissue surrounding the nerve. Scar formation after surgery may therefore cause entrapment of the nerve. We describe a case of occipital neuropathy as a complication of BAHA surgery.

  7. Recent Discoveries on Antwerp Panel Makers' Marks

    DEFF Research Database (Denmark)

    Wadum, Jørgen

    1993-01-01

    There still exist today uncertainties and misunderstandings in our interpretation of panel makers' marks from early 17th century Antwerp. In the future, panel marks and the panels on which they can be found will certainly render much more information concerning the technology of that time. Still...... more can be added to our comprehension of the way the panel makers worked in Antwerp. In the following paper I shall give a brief summary of the present state of research, as well as outline the complicated task of interpreting these marks and their use as a dating tool. The ready-made supports...

  8. A Panel Data Toolbox for MATLAB

    Directory of Open Access Journals (Sweden)

    Inmaculada C. Álvarez

    2017-01-01

    Full Text Available Panel Data Toolbox is a new package for MATLAB that includes functions to estimate the main econometric methods of balanced and unbalanced panel data analysis. The package includes code for the standard fixed, between and random effects estimation methods, as well as for the existing instrumental panels and a wide array of spatial panels. A full set of relevant tests is also included. This paper describes the methodology and implementation of the functions and illustrates their use with well-known examples. We perform numerical checks against other popular commercial and free software to show the validity of the results.

  9. Panel data specifications in nonparametric kernel regression

    DEFF Research Database (Denmark)

    Czekaj, Tomasz Gerard; Henningsen, Arne

    We discuss nonparametric regression models for panel data. A fully nonparametric panel data specification that uses the time variable and the individual identifier as additional (categorical) explanatory variables is considered to be the most suitable. We use this estimator and conventional...... parametric panel data estimators to analyse the production technology of Polish crop farms. The results of our nonparametric kernel regressions generally differ from the estimates of the parametric models but they only slightly depend on the choice of the kernel functions. Based on economic reasoning, we...... found the estimates of the fully nonparametric panel data model to be more reliable....

  10. Interagency Security Classification Appeals Panel (ISCAP) Decisions

    Data.gov (United States)

    National Archives and Records Administration — This online collection includes documents decided upon by the Interagency Security Classification Appeals Panel (ISCAP) starting in Fiscal Year 2012. The documents...

  11. Orbiter radiator panel solar focusing test

    Science.gov (United States)

    Howell, H. R.; Rankin, J. G.

    1983-01-01

    Test data are presented which define the area around the Orbiter radiator panels for which the solar reflections are concentrated to one-sun or more. The concave shape of the panels and their specular silver/Teflon coating causes focusing of the reflected solar energy which could have adverse heating effects on equipment or astronaut extravehicular activity (EVA) in the vicinity of the radiator panels. A room ambient test method was utilized with a one-tenth scale model of the radiator panels.

  12. Development of Electrostatically Clean Solar Array Panels

    Science.gov (United States)

    Stern, Theodore G.

    2000-01-01

    Certain missions require Electrostatically Clean Solar Array (ECSA) panels to establish a favorable environment for the operation of sensitive scientific instruments. The objective of this program was to demonstrate the feasibility of an ECSA panel that minimizes panel surface potential below 100mV in LEO and GEO charged particle environments, prevents exposure of solar cell voltage and panel insulating surfaces to the ambient environment, and provides an equipotential, grounded structure surrounding the entire panel. An ECSA panel design was developed that uses a Front Side Aperture-Shield (FSA) that covers all inter-cell areas with a single graphite composite laminate, composite edge clips for connecting the FSA to the panel substrate, and built-in tabs that interconnect the FSA to conductive coated coverglasses using a conductive adhesive. Analysis indicated the ability of the design to meet the ECSA requirements. Qualification coupons and a 0.5m x 0.5m prototype panel were fabricated and tested for photovoltaic performance and electrical grounding before and after exposure to acoustic and thermal cycling environments. The results show the feasibility of achieving electrostatic cleanliness with a small penalty in mass, photovoltaic performance and cost, with a design is structurally robust and compatible with a wide range of current solar panel technologies.

  13. Uncertainties in predicting solar panel power output

    Science.gov (United States)

    Anspaugh, B.

    1974-01-01

    The problem of calculating solar panel power output at launch and during a space mission is considered. The major sources of uncertainty and error in predicting the post launch electrical performance of the panel are considered. A general discussion of error analysis is given. Examples of uncertainty calculations are included. A general method of calculating the effect on the panel of various degrading environments is presented, with references supplied for specific methods. A technique for sizing a solar panel for a required mission power profile is developed.

  14. Laser illuminated flat panel display

    Energy Technology Data Exchange (ETDEWEB)

    Veligdan, J.T.

    1995-12-31

    A 10 inch laser illuminated flat panel Planar Optic Display (POD) screen has been constructed and tested. This POD screen technology is an entirely new concept in display technology. Although the initial display is flat and made of glass, this technology lends itself to applications where a plastic display might be wrapped around the viewer. The display screen is comprised of hundreds of planar optical waveguides where each glass waveguide represents a vertical line of resolution. A black cladding layer, having a lower index of refraction, is placed between each waveguide layer. Since the cladding makes the screen surface black, the contrast is high. The prototype display is 9 inches wide by 5 inches high and approximately I inch thick. A 3 milliwatt HeNe laser is used as the illumination source and a vector scanning technique is employed.

  15. Insulating panels with rice husk

    Energy Technology Data Exchange (ETDEWEB)

    Salas, J.; Veras, J.

    1986-01-01

    This study includes the quantitative results of tests caried out on 7.5 x 15.0 cm cylindrical test pieces and fullsized panels with a cement and rice husk, produced by using means belonging to the so-called ''appropriate technologies''. These results are summarized and analyzed with a view to providing a possible alternative for substituting other insulating materials, which are generally imported, in developing countries. The technical results presented point towards a promising future for the task undertaken, within the context of a research project on ''materials, technologies and prototypes for very low-cost housing'' which, in a - multinational capacity, is being developed at the Instituto E. Torroja.

  16. AQUEOUS HOMOGENEOUS REACTORTECHNICAL PANEL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    Diamond, D.J.; Bajorek, S.; Bakel, A.; Flanagan, G.; Mubayi, V.; Skarda, R.; Staudenmeier, J.; Taiwo, T.; Tonoike, K.; Tripp, C.; Wei, T.; Yarsky, P.

    2010-12-03

    Considerable interest has been expressed for developing a stable U.S. production capacity for medical isotopes and particularly for molybdenum- 99 (99Mo). This is motivated by recent re-ductions in production and supply worldwide. Consistent with U.S. nonproliferation objectives, any new production capability should not use highly enriched uranium fuel or targets. Conse-quently, Aqueous Homogeneous Reactors (AHRs) are under consideration for potential 99Mo production using low-enriched uranium. Although the Nuclear Regulatory Commission (NRC) has guidance to facilitate the licensing process for non-power reactors, that guidance is focused on reactors with fixed, solid fuel and hence, not applicable to an AHR. A panel was convened to study the technical issues associated with normal operation and potential transients and accidents of an AHR that might be designed for isotope production. The panel has produced the requisite AHR licensing guidance for three chapters that exist now for non-power reactor licensing: Reac-tor Description, Reactor Coolant Systems, and Accident Analysis. The guidance is in two parts for each chapter: 1) standard format and content a licensee would use and 2) the standard review plan the NRC staff would use. This guidance takes into account the unique features of an AHR such as the fuel being in solution; the fission product barriers being the vessel and attached systems; the production and release of radiolytic and fission product gases and their impact on operations and their control by a gas management system; and the movement of fuel into and out of the reactor vessel.

  17. Fixture for assembling solar panels

    Science.gov (United States)

    Dillard, P. A.; Fritz, W. M.

    1979-01-01

    Vacuum fixture attaches array of silicon solar cells to mounting plate made of clear glass which holds and protects cells. Glass plate transmits, rather than absorbs, solar energy thus cooling cells for efficient operation. Device therefore reduces handling of cells and interconnecting conductors to one operation.

  18. Corrective Jaw Surgery

    Medline Plus

    Full Text Available ... here to find out more. Dental Implant Surgery Dental Implant Surgery Dental implant surgery is, of course, ... to find out more. Wisdom Teeth Management Wisdom Teeth Management An impacted wisdom tooth can damage neighboring ...

  19. Corrective Jaw Surgery

    Medline Plus

    Full Text Available ... Oral Surgeries Facial Cosmetic Surgery Facial Injury / Trauma Surgery Obstructive Sleep Apnea (OSA) Oral, Head and Neck Pathology TMJ and Facial Pain Wisdom Teeth Management Procedures Anesthesia Anesthesia Oral and maxillofacial surgeons are ...

  20. Corrective Jaw Surgery

    Medline Plus

    Full Text Available ... Other Oral Surgeries Facial Cosmetic Surgery Facial Injury / Trauma Surgery Obstructive Sleep Apnea (OSA) Oral, Head and Neck Pathology TMJ and Facial Pain Wisdom Teeth Management Procedures Anesthesia Anesthesia Oral and maxillofacial surgeons ...

  1. Hip Replacement Surgery

    Science.gov (United States)

    ... Initiative Breadcrumb Home Health Topics English Español Hip Replacement Surgery Basics In-Depth Download Download EPUB Download ... What is it? Points To Remember About Hip Replacement Surgery Hip replacement surgery removes damaged or diseased ...

  2. Lung surgery - discharge

    Science.gov (United States)

    ... Lung biopsy - discharge; Thoracoscopy - discharge; Video-assisted thoracoscopic surgery - discharge; VATS - discharge ... milk) for 2 weeks after video-assisted thoracoscopic surgery and 6 to 8 weeks after open surgery. ...

  3. Laser surgery - skin

    Science.gov (United States)

    Surgery using a laser ... used is directly related to the type of surgery being performed and the color of the tissue ... Laser surgery can be used to: Close small blood vessels to reduce blood loss Remove warts , moles , sunspots, and ...

  4. Coronary Artery Bypass Surgery

    Science.gov (United States)

    ... t help, you may need coronary artery bypass surgery. The surgery creates a new path for blood to flow ... more than one bypass. The results of the surgery usually are excellent. Many people remain symptom-free ...

  5. Corrective Jaw Surgery

    Medline Plus

    Full Text Available ... Surgery Dental Implant Surgery Facial Cosmetic Surgery Head, Neck and Oral Pathology Obstructive Sleep Apnea TMJ and Facial Pain Treatment of Facial Injury Wisdom Teeth Management Procedures ...

  6. Pediatric heart surgery

    Science.gov (United States)

    Heart surgery - pediatric; Heart surgery for children; Acquired heart disease; Heart valve surgery - children ... Ginther RM, Forbess JM. Pediatric cardiopulmonary bypass. In: ... Care . 5th ed. Philadelphia, PA: Elsevier; 2017:chap 37. LeRoy S, ...

  7. Corrective Jaw Surgery

    Medline Plus

    Full Text Available ... Do Who We Are News Videos Contact Find a Surgeon What We Do Anesthesia Anesthesia Oral and ... Craniofacial Surgery Cleft Lip/Palate and Craniofacial Surgery A cleft lip may require one or more surgeries ...

  8. What Is Refractive Surgery?

    Science.gov (United States)

    ... Uveitis Focus On Pediatric Ophthalmology Education Center Oculofacial Plastic Surgery Center Laser Surgery Education Center Redmond Ethics Center ... Glaucoma Education Center Pediatric Ophthalmology Education Center Oculofacial Plastic ... Center Laser Surgery Education Center Redmond Ethics Center ...

  9. LASIK - Laser Eye Surgery

    Science.gov (United States)

    ... Uveitis Focus On Pediatric Ophthalmology Education Center Oculofacial Plastic Surgery Center Laser Surgery Education Center Redmond Ethics Center ... Glaucoma Education Center Pediatric Ophthalmology Education Center Oculofacial Plastic ... Center Laser Surgery Education Center Redmond Ethics Center ...

  10. Corrective Jaw Surgery

    Medline Plus

    Full Text Available ... surgery, orthognathic surgery is performed to correct functional problems. Jaw Surgery can have a dramatic effect on ... without straining Chronic mouth breathing Sleep apnea (breathing problems when sleeping, including snoring) Your dentist, orthodontist and ...

  11. Thermonuclear device

    International Nuclear Information System (INIS)

    Yagi, Yasuomi; Takahashi, Ken; Hashimoto, Hiroshi.

    1984-01-01

    Purpose: To improve the plasma confining performances by bringing the irregular magnetic fields nearly to zero and decreasing the absolute value of the irregular magnetic fields at every positions. Constitution: The winding direction of a plurality of coil elements, for instance, double pan cake coils of toroidal coils in a torus type or mirror type thermonuclear device are reversed to each other in their laminating direction, whereby the irregular magnetic fields due to the coil-stepped portions in each toroidal coils are brought nearly to zero. This enables to bring the average irregular magnetic fields as a whole in the thermonuclear device nearly to zero, as well as, decrease the absolute value of the irregular magnetic fields in each positions. Thus, the plasma confining performances can be improved. (Moriyama, K.)

  12. Thermonuclear device

    International Nuclear Information System (INIS)

    Oosaki, Osamu; Masuda, Kenju.

    1980-01-01

    Purpose: To provide excellent electric properties and high reliability in a thermonuclear device by improving a current collecting board connected to a coil device. Constitution: A current collecting board element perforated with an opening for enserting a connecting terminal is sized to be inserted into a plating tank, and is surface treated in the plating tank. Only the current collecting board element preferably surface treated is picked up. A plurality of such current collecting board elements are connected and welded to form a large current collecting board. In this manner, the current collecting board having several m 2 to several ten order m 2 in area can be obtained as preferably surface treated at the connecting terminal hole. The current collecting board element can be determined in shape with the existing facility without increasing the size of a surface treating tank. (Kamimura, M.)

  13. [Field surgery department: from origin and history to modern times].

    Science.gov (United States)

    Samokhvalov, I M; Tyniakin, N A

    2011-09-01

    Field Surgery Department of the Kirov Military Medical Academy celebrates the 80th anniversary/The distinguished Russian surgeon V.A. Oppel created not only the team having the general goal to study thoroughly main laws of combat pathology, but also installed basic knowledge concerning surgical care administration in future local wars. Contribution of Field Surgery Department to updating of main principles of field surgery, development of military tenet, treating tenet, training of highly qualified panel surgeons treating patients with severe wounds shown in this paper.

  14. 78 FR 76993 - Defense Federal Acquisition Regulation Supplement: Photovoltaic Devices (DFARS Case 2014-D006)

    Science.gov (United States)

    2013-12-20

    ... contract exceeds $25,000, the Offeror's certification that such photovoltaic device (e.g., solar panel) is... Federal Acquisition Regulation Supplement: Photovoltaic Devices (DFARS Case 2014-D006) AGENCY: Defense... (DFARS) to clarify rules of origin under trade agreements for photovoltaic devices to be utilized under...

  15. Clamping device

    International Nuclear Information System (INIS)

    Schuengel, P.

    1976-01-01

    Device for prestressing a multiplicity of screw bolts sitting on a hole circle, where a carrying ring is provided which is supported on the flange of the pressure vessel of a nuclear reactor, and where on the carrying ring a hydraulic cylinder is arranged the force of which is to be guided into the screw bolt over an auxiliary bolt which may be coupled to the screw bolt. (orig./TK) [de

  16. "Distinvar" device

    CERN Multimedia

    CERN PhotoLab

    1965-01-01

    The alignment of one of the accelerator magnets being checked by the AR Division survey group. A "distinvar" device, invented by the group, using calibrated invar wires stretched between the fixed survey pillar (on the left) and a fixed point on the magnet. In two days it is thus possible to measure the alignment of the 100 magnets with an accuracy better than 1/10.

  17. Latching device

    Science.gov (United States)

    Ulrich, G. W. (Inventor)

    1975-01-01

    A latching device is suited for use in establishing a substantially motionless connection between a stationary receiver and a movable latching mechanism. The latching mechanism includes a pivotally supported restraining hook continuously urged into a capturing relationship with the receiver, characterized by a spring-biased pawl having a plurality of aligned teeth. The teeth are seated in the surface of the throat of the hook and positionable into restraining engagement with a rigid restraining shoulder projected from the receiver.

  18. Nonparametric tests of panel conditioning and attrition bias in panel surveys

    NARCIS (Netherlands)

    Das, J.W.M.; van Soest, A.H.O.; Toepoel, V.

    2011-01-01

    Over the past decades there has been an increasing use of panel surveys at the household or individual level. Panel data have important advantages compared to independent cross sections, but also two potential drawbacks: attrition bias and panel conditioning effects. Attrition bias arises if

  19. Control system of fuel transporting device

    International Nuclear Information System (INIS)

    Yokota, Minoru.

    1981-01-01

    Purpose: To effectively avoid an obstacle in a fuel transporting device by reading the outputs of absolute position detectors mounted on movable trucks, controlling the movements of the trucks, and thereby smoothly and accurately positioning the fuel transporting device at predetermined position and providing a contact detector thereat. Method: The outputs from absolute position detectors which are mounted on a longitudinally movable truck and a laterally movable truck are input to an input/output control circuit. The input/output control circuit serves to compare, the position a fuel transporting device is to be moved to, with the present position on the basis of said input detection signal and a command signal from an operator console, to calculate the amount of movement to be driven, to produce an operation signal therefor to a control panel, and to drive and control the drive motors which are respectively mounted on the trucks for the fuel transfer device. On the other hand, in case that the transfer device comes into contact with an obstacle, the contact detector will immediately operate to produce a stop command through the control panel to the transporting device, and avoid a collision with the obstacle. (Yoshino, Y.)

  20. PV panel model based on datasheet values

    DEFF Research Database (Denmark)

    Sera, Dezso; Teodorescu, Remus; Rodriguez, Pedro

    2007-01-01

    This work presents the construction of a model for a PV panel using the single-diode five-parameters model, based exclusively on data-sheet parameters. The model takes into account the series and parallel (shunt) resistance of the panel. The equivalent circuit and the basic equations of the PV cell...

  1. Improving Survey Response Rates in Online Panels

    DEFF Research Database (Denmark)

    Pedersen, Mogens Jin; Nielsen, Christian Videbæk

    2016-01-01

    experiment among 6,162 members of an online survey panel, this article shows how low-cost incentives and cost-free text appeal interventions may impact the survey response rate in online panels. The experimental treatments comprise (a) a cash prize lottery incentive, (b) two donation incentives equating...

  2. Touch panel system for control applications

    International Nuclear Information System (INIS)

    Crook, K.; Johnson, R.

    1976-12-01

    The use of finger-sensitive touch panels in association with computer-generated displays for control and monitoring of the Stanford linear accelerator is discussed. This control concept has proven to be very effective. The hardware and software aspects of the Touch Panel portion of the control system are described

  3. Improving Strength of Postbuckled Panels Through Stitching

    Science.gov (United States)

    Jegley, Dawn C.

    2007-01-01

    The behavior of blade-stiffened graphite-epoxy panels with impact damage is examined to determine the effect of adding through-the-thickness stitches in the stiffener flange-to-skin interface. The influence of stitches is evaluated by examining buckling and failure for panels with failure loads up to 3.5 times greater than buckling loads. Analytical and experimental results from four configurations of panel specimens are presented. For each configuration, two panels were manufactured with skin and flanges held together with through-the-thickness stitches introduced prior to resin infusion and curing and one panel was manufactured with no stitches holding the flange to the skin. No mechanical fasteners were used for the assembly of any of these panels. Panels with and without low-speed impact damage were loaded to failure in compression. Buckling and failure modes are discussed. Stitching had little effect on buckling loads but increased the failure loads of impact-damaged panels by up to 30%.

  4. Research challenges for energy data management (panel)

    DEFF Research Database (Denmark)

    Pedersen, Torben Bach; Lehner, Wolfgang

    2013-01-01

    This panel paper aims at initiating discussion at the Second International Workshop on Energy Data Management (EnDM 2013) about the important research challenges within Energy Data Management. The authors are the panel organizers, extra panelists will be recruited before the workshop...

  5. Electronic unit for fotovoltaic solar panelling validation

    International Nuclear Information System (INIS)

    Vazquez, J.; Valverde, J.; Garcia, J.M.

    1988-01-01

    A low cost and easy to use electronic system for photovoltaic solar panelling validation is described. It measures, with a certain periodicity, voltage and current given by the panel, determines the supplied power, and every so often, its maximum valves. The unit is fitted with a data storage system which allows data recording for later analysis. (Author)

  6. Air loads on solar panels during launch

    NARCIS (Netherlands)

    Beltman, W.M.; van der Hoogt, Peter; Spiering, R.M.E.J.; Tijdeman, H.

    1996-01-01

    The dynamical behaviour of solar panels during launch is significantly affected by the thin layers of air trapped between the panels. For narrow gaps the air manifests itself not only as a considerable added mass, but its viscosity can result in a substantial amount of damping. A model has been

  7. Outgassing tests on iras solar panel samples

    Science.gov (United States)

    Premat, G.; Zwaal, A.; Pennings, N. H.

    1980-01-01

    Several outgassing tests were carried out on representative solar panel samples in order to determine the extent of contamination that could be expected from this source. The materials for the construction of the solar panels were selected as a result of contamination obtained in micro volatile condensable materials tests.

  8. An intersection test for panel unit roots

    NARCIS (Netherlands)

    Hanck, C.

    2013-01-01

    This article proposes a new panel unit root test based on Simes' ( 1986) classical intersection test. The test is robust to general patterns of cross-sectional dependence and yet is straightforward to implement, only requiring p-values of time series unit root tests of the series in the panel, and

  9. MoMLA: From Panel to Gallery

    Science.gov (United States)

    Vitanza, Victor, Ed.; Kuhn, Virginia, Ed.

    2013-01-01

    The work presented here in this "Panel to Gallery" was originally produced and assembled for the 2012 Modern Language Association Conference in Seattle, Washington. Similar to "From Gallery to Webtext", the event Victor curated for the 2006 College Composition and Communication Conference, this "Panel to Gallery" event at MLA set aside the…

  10. Response problems in a vacation panel study

    Science.gov (United States)

    Christine A. Vogt; Susan I. Stewart

    2001-01-01

    This paper investigates response problems encountered in a panel study of travel behavior. Though the overall response rate to the three-wave panel study was acceptable (over 60%), three types of response problems were encountered: refusal, non-response, and attrition. In a follow-up phone survey, a sample of individuals from each problem response group was questioned...

  11. Blood Test: Comprehensive Metabolic Panel (CMP)

    Science.gov (United States)

    ... Staying Safe Videos for Educators Search English Español Blood Test: Comprehensive Metabolic Panel (CMP) KidsHealth / For Parents / Blood ... de sangre: panel metabólico ampliado What Is a Blood Test? A blood test is when a sample of ...

  12. Blood Test: Basic Metabolic Panel (BMP)

    Science.gov (United States)

    ... Staying Safe Videos for Educators Search English Español Blood Test: Basic Metabolic Panel (BMP) KidsHealth / For Parents / Blood ... de sangre: panel metabólico básico What Is a Blood Test? A blood test is when a sample of ...

  13. 76 FR 50499 - Arts Advisory Panel

    Science.gov (United States)

    2011-08-15

    ... ARTS AND THE HUMANITIES National Endowment for the Arts Arts Advisory Panel Pursuant to Section 10(a)(2... meeting of the Arts Advisory Panel to the National Council on the Arts will be held at the Nancy Hanks... financial assistance under the National Foundation on the Arts and the Humanities Act of 1965, as amended...

  14. 77 FR 41808 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2012-07-16

    ... ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meeting. SUMMARY: Pursuant to Section 10(a)(2) of... meetings of the Arts Advisory Panel to the National Council on the Arts will be held at the Nancy Hanks...

  15. 78 FR 64026 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2013-10-25

    ... ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of Meeting SUMMARY: Pursuant to Section 10(a)(2) of the... of the Arts Advisory Panel to the National Council on the Arts will be held at the Nancy Hanks Center...

  16. 77 FR 22613 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2012-04-16

    ... ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and the Humanities. ACTION: Notice of meeting. SUMMARY: Pursuant to Section 10(a)(2... meetings of the Arts Advisory Panel to the National Council on the Arts will be held at the Nancy Hanks...

  17. 77 FR 13367 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2012-03-06

    ... ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meeting. SUMMARY: Pursuant to Section 10(a)(2) of... of the Arts Advisory Panel to the National Council on the Arts will be held by teleconference at the...

  18. 78 FR 42982 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2013-07-18

    ... ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of Meetings SUMMARY: Pursuant to Section 10(a)(2) of... the Arts Advisory Panel to the National Council on the Arts will be held at the Nancy Hanks Center...

  19. 77 FR 27803 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2012-05-11

    ... ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meeting. SUMMARY: Pursuant to Section 10(a)(2) of... meetings of the Arts Advisory Panel to the National Council on the Arts will be held at the Nancy Hanks...

  20. 78 FR 17942 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2013-03-25

    ... ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meetings. SUMMARY: Pursuant to Section 10(a)(2) of... meetings of the Arts Advisory Panel to the National Council on the Arts will be held at the Nancy Hanks...

  1. 77 FR 61643 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2012-10-10

    ... ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meeting. SUMMARY: Pursuant to Section 10(a)(2) of... meetings of the Arts Advisory Panel to the National Council on the Arts will be held at the Nancy Hanks...

  2. 75 FR 56146 - Arts Advisory Panel; Meetings

    Science.gov (United States)

    2010-09-15

    ... ARTS AND THE HUMANITIES National Endowment for the Arts Arts Advisory Panel; Meetings Pursuant to... given that four meetings of the Arts Advisory Panel to the National Council on the Arts will be held at... are approximate): Arts Education (application review): October 4-5, 2010 in Room 716. A portion of...

  3. 77 FR 75672 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2012-12-21

    ... ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of Meeting. SUMMARY: Pursuant to Section 10(a)(2) of... meetings of the Arts Advisory Panel to the National Council on the Arts will be held at the Nancy Hanks...

  4. 78 FR 59978 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2013-09-30

    ... ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meeting. SUMMARY: Pursuant to Section 10(a)(2) of... meeting of the Arts Advisory Panel to the National Council on the Arts will be held at the Nancy Hanks...

  5. 77 FR 35067 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2012-06-12

    ... ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meeting. SUMMARY: Pursuant to Section 10(a)(2) of... meetings of the Arts Advisory Panel to the National Council on the Arts will be held at the Nancy Hanks...

  6. 77 FR 49026 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2012-08-15

    ... ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meeting. SUMMARY: Pursuant to Section 10(a)(2) of... meeting of the Arts Advisory Panel to the National Council on the Arts will be held at the Nancy Hanks...

  7. 77 FR 56875 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2012-09-14

    ... ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meeting. SUMMARY: Pursuant to Section 10(a)(2) of... meetings of the Arts Advisory Panel to the National Council on the Arts will be held by teleconference from...

  8. 78 FR 26399 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2013-05-06

    ... ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of Meeting. SUMMARY: Pursuant to Section 10(a)(2) of... meeting of the Arts Advisory Panel to the National Council on the Arts will be held by teleconference at...

  9. 76 FR 3677 - Arts Advisory Panel

    Science.gov (United States)

    2011-01-20

    ... ARTS AND THE HUMANITIES National Endowment for the Arts Arts Advisory Panel Pursuant to Section 10(a)(2... meeting of the Arts Advisory Panel to the National Council on the Arts will be held at the Nancy Hanks..., discussion, evaluation, and recommendations on financial assistance under the National Foundation on the Arts...

  10. 78 FR 5213 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2013-01-24

    ... ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meeting. SUMMARY: Pursuant to Section 10(a)(2) of... meeting of the Arts Advisory Panel to the National Council on the Arts will be held at the Nancy Hanks...

  11. 78 FR 50451 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2013-08-19

    ... ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of Meetings. SUMMARY: Pursuant to Section 10(a)(2) of... meeting of the Arts Advisory Panel to the National Council on the Arts will be held at the Nancy Hanks...

  12. 78 FR 28244 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2013-05-14

    ... ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of Meetings SUMMARY: Pursuant to Section 10(a)(2) of... meetings of the Arts Advisory Panel to the National Council on the Arts will be held at the Nancy Hanks...

  13. 78 FR 21978 - Arts Advisory Panel Meeting

    Science.gov (United States)

    2013-04-12

    ... ARTS AND THE HUMANITIES Arts Advisory Panel Meeting AGENCY: National Endowment for the Arts, National Foundation on the Arts and Humanities. ACTION: Notice of meeting. SUMMARY: Pursuant to Section 10(a)(2) of... meeting of the Arts Advisory Panel to the National Council on the Arts will be held at the Nancy Hanks...

  14. 49 CFR 845.22 - Technical panel.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Technical panel. 845.22 Section 845.22 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL TRANSPORTATION SAFETY BOARD... Technical panel. The Director, Bureau of Accident Investigation, or the Director, Bureau of Field Operations...

  15. Delamination tolerance studies in laminated composite panels

    Indian Academy of Sciences (India)

    Determination of levels of tolerance in delaminated composite panels is an important issue in composite structures technology. The primary intention is to analyse delaminated composite panels and estimate Strain Energy Release Rate (SERR) parameters at the delamination front to feed into acceptability criteria.

  16. 76 FR 23845 - Arts Advisory Panel

    Science.gov (United States)

    2011-04-28

    ... ARTS AND THE HUMANITIES National Endowment for the Arts Arts Advisory Panel Pursuant to Section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), as amended, notice is hereby given that one meeting of the Arts Advisory Panel to the National Council on the Arts will be held at the Nancy Hanks...

  17. Dynamic spatial panels : models, methods, and inferences

    NARCIS (Netherlands)

    Elhorst, J. Paul

    This paper provides a survey of the existing literature on the specification and estimation of dynamic spatial panel data models, a collection of models for spatial panels extended to include one or more of the following variables and/or error terms: a dependent variable lagged in time, a dependent

  18. The Atomic Safety and Licensing Board Panel

    International Nuclear Information System (INIS)

    1998-01-01

    Through the Atomic Energy Act, Congress made is possible for the public to get a full and fair hearing on civilian nuclear matters. Individuals who are directly affected by any licensing action involving a facility producing or utilizing nuclear materials may participate in a formal hearing, on the record, before independent judges on the Atomic Safety and Licensing Board Panel (ASLBP or Panel). Frequently, in deciding whether a license, permit, amendment, or extension should be granted to a particular applicant, the Panel members must be more than mere umpires. If appropriate, they are authorized to go beyond the issues the parties place before them in order to identify, explore, and resolve significant questions involving threats to the public health and safety that come to a board's attention during the proceedings. This brochure explains the purpose of the panel. Also addressed are: type of hearing handled; method of public participation; formality of hearings; high-level waste; other panel responsibilities and litigation technology

  19. Graphite/epoxy orthogrid panel fabrication

    Science.gov (United States)

    Lager, J. R.

    1978-01-01

    The structural concept considered for a spacecraft body structure is a grid stiffened skin with a skin laminate configuration and the stiffener grid geometry selected to best suit the design requirements. The orthogrid panel developed weighs 0.55 lb/sq ft and resisted an ultimate in-plane shear load of 545 lbf/in. The basic concept of a grid stiffener composite panel is that a relatively thin skin is reinforced with a gridwork of stiffeners so that the overall panel can resist design loads without becoming structurally unstable or being overstressed. The main feature of the orthogrid panel design is that it provides the potential for low cost structural panels when advanced to the production phase. The most innovative part of the fabrication method is the foam/fiberglass stiffener web grid billet fabrication and machining to size.

  20. Differing professional opinions: 1987 special review panel

    International Nuclear Information System (INIS)

    1988-01-01

    In November 1987, the five-member Differing Professional Opinions Special Review Panel established by the Executive Director for Operations of the US Nuclear Regulatory Commission to review agency policies and procedures for handling differing professional opinions (DPOs) presented its findings and recommendations in NUREG-1290. The issuance of that report completed the first task of the panel's charter. In accordance with Manual chapter 4125, Section L, and the charter of the Special Review Panel, the panel's second task was to ''...review...the DPOs submitted subsequent to the previous Panel's review, in order to identify any employee whose DPO made a significant contribution to the Agency or to the public safety but who has not yet been recognized for such contribution.'' This Addendum provides the findings of that review

  1. Thin film photovoltaic panel and method

    Science.gov (United States)

    Ackerman, Bruce; Albright, Scot P.; Jordan, John F.

    1991-06-11

    A thin film photovoltaic panel includes a backcap for protecting the active components of the photovoltaic cells from adverse environmental elements. A spacing between the backcap and a top electrode layer is preferably filled with a desiccant to further reduce water vapor contamination of the environment surrounding the photovoltaic cells. The contamination of the spacing between the backcap and the cells may be further reduced by passing a selected gas through the spacing subsequent to sealing the backcap to the base of the photovoltaic panels, and once purged this spacing may be filled with an inert gas. The techniques of the present invention are preferably applied to thin film photovoltaic panels each formed from a plurality of photovoltaic cells arranged on a vitreous substrate. The stability of photovoltaic conversion efficiency remains relatively high during the life of the photovoltaic panel, and the cost of manufacturing highly efficient panels with such improved stability is significantly reduced.

  2. Report of the Federal Internetworking Requirements Panel

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-05-31

    The Federal Internetworking Requirements Panel (FIRP) was established by the National Institute of Standards and Technology (NIST) to reassess Federal requirements for open systems networks and to recommend policy on the Government`s use of networking standards. The Panel was chartered to recommend actions which the Federal Government can take to address the short and long-term issues of interworking and convergence of networking protocols--particularly the Internet Protocol Suite (IPS) and Open Systems Interconnection (OSI) protocol suite and, when appropriate, proprietary protocols. The Panel was created at the request of the Office of Management and Budget in collaboration with the Federal Networking Council and the Federal Information Resources Management Policy Council. The Panel`s membership and charter are contained in an appendix to this report.

  3. Medical devices for the treatment of obesity.

    Science.gov (United States)

    Lee, Phong Ching; Dixon, John

    2017-09-01

    Obesity is a major public health concern that leads to numerous metabolic, mechanical and psychological complications. Although lifestyle interventions are the cornerstone of obesity management, subsequent physiological neurohormonal adaptations limit weight loss, strongly favour weight regain and counteract sustained weight loss. A range of effective therapies are therefore needed to manage this chronic relapsing disease. Bariatric surgery delivers substantial, durable weight loss but limited access to care, perceived high risks and costs restrict uptake. Medical devices are uniquely positioned to bridge the gap between more conservative lifestyle intervention and weight-loss pharmacotherapy and more disruptive bariatric surgery. In this Review, we examine the range of gastrointestinal medical devices that are available in clinical practice to treat obesity, as well as those that are in advanced stages of development. We focus on the mechanisms of action as well as the efficacy and safety profiles of these devices. Many of these devices are placed endoscopically, which provides gastroenterologists with exciting opportunities for treatment.

  4. Devices and Endoscopic Bariatric Therapies for Obesity.

    Science.gov (United States)

    Saunders, Katherine H; Igel, Leon I; Saumoy, Monica; Sharaiha, Reem Z; Aronne, Louis J

    2018-04-17

    In this review, we describe the FDA-approved and investigational devices and endoscopic bariatric therapies for the treatment of obesity. We focus on literature published in the past few years and present mechanisms of action as well as efficacy and safety data. Devices and endoscopic procedures are emerging options to fill the significant treatment gap in the management of obesity. Not only are these devices and procedures minimally invasive and reversible, but they are potentially more effective than antiobesity medications, often safer for poor surgical candidates and possibly less expensive than bariatric surgery. As many patients require a variety of management strategies (medications, devices, procedures, and/or surgery) in addition to lifestyle modifications to achieve clinically significant weight loss, the future of obesity treatment involves a multidisciplinary approach. Combinations of advanced treatment strategies can lead to additive or synergistic weight loss. This is an area that requires further investigation.

  5. Robot-assisted general surgery.

    Science.gov (United States)

    Hazey, Jeffrey W; Melvin, W Scott

    2004-06-01

    With the initiation of laparoscopic techniques in general surgery, we have seen a significant expansion of minimally invasive techniques in the last 16 years. More recently, robotic-assisted laparoscopy has moved into the general surgeon's armamentarium to address some of the shortcomings of laparoscopic surgery. AESOP (Computer Motion, Goleta, CA) addressed the issue of visualization as a robotic camera holder. With the introduction of the ZEUS robotic surgical system (Computer Motion), the ability to remotely operate laparoscopic instruments became a reality. US Food and Drug Administration approval in July 2000 of the da Vinci robotic surgical system (Intuitive Surgical, Sunnyvale, CA) further defined the ability of a robotic-assist device to address limitations in laparoscopy. This includes a significant improvement in instrument dexterity, dampening of natural hand tremors, three-dimensional visualization, ergonomics, and camera stability. As experience with robotic technology increased and its applications to advanced laparoscopic procedures have become more understood, more procedures have been performed with robotic assistance. Numerous studies have shown equivalent or improved patient outcomes when robotic-assist devices are used. Initially, robotic-assisted laparoscopic cholecystectomy was deemed safe, and now robotics has been shown to be safe in foregut procedures, including Nissen fundoplication, Heller myotomy, gastric banding procedures, and Roux-en-Y gastric bypass. These techniques have been extrapolated to solid-organ procedures (splenectomy, adrenalectomy, and pancreatic surgery) as well as robotic-assisted laparoscopic colectomy. In this chapter, we review the evolution of robotic technology and its applications in general surgical procedures.

  6. Panel fabrication utilizing GaAs solar cells

    Science.gov (United States)

    Mardesich, N.

    1984-01-01

    The development of the GaAs solar cells for space applications is described. The activities in the fabrication of GaAs solar panels are outlined. Panels were fabricated while introducing improved quality control, soldering laydown and testing procedures. These panels include LIPS II, San Marco Satellite, and a low concentration panel for Rockwells' evaluation. The panels and their present status are discussed.

  7. 5 CFR 2471.11 - Final action by the Panel.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Final action by the Panel. 2471.11... LABOR RELATIONS AUTHORITY AND FEDERAL SERVICE IMPASSES PANEL FEDERAL SERVICE IMPASSES PANEL PROCEDURES OF THE PANEL § 2471.11 Final action by the Panel. (a) If the parties do not arrive at a settlement as...

  8. 22 CFR 1471.10 - Final action by the Panel.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 2 2010-04-01 2010-04-01 true Final action by the Panel. 1471.10 Section 1471...; GENERAL COUNSEL OF THE FEDERAL LABOR RELATIONS AUTHORITY; AND THE FOREIGN SERVICE IMPASSE DISPUTES PANEL FOREIGN SERVICE IMPASSE DISPUTES PANEL PROCEDURES OF THE PANEL § 1471.10 Final action by the Panel. (a) If...

  9. 5 CFR 2472.11 - Final action by the Panel.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Final action by the Panel. 2472.11... LABOR RELATIONS AUTHORITY AND FEDERAL SERVICE IMPASSES PANEL FEDERAL SERVICE IMPASSES PANEL IMPASSES... SCHEDULES Procedures of the Panel § 2472.11 Final action by the Panel. (a) After due consideration of the...

  10. Features of fire and explosion safety of buildings from a sandwich of panels

    Directory of Open Access Journals (Sweden)

    Salymova Eugenia

    2017-01-01

    Full Text Available Recently in Russia about 100% of buildings of an oil and gas complex are built with use triplex a sandwich of panels (S.P. Almost all these buildings are explosive and increase in their exploisure-resistance requires application of easily thrown off or safety designs. A sandwich of the panel is an ideal applicant for a role of safety designs according to the weight characteristics. Except inertial properties extremely important characteristic is opening pressure. This size remains acritical in view of a variety of their sizes, thickness of metal sheets, a variety of their fastening to metal designs. In work opening pressure at explosion for a sandwich of panels of 2×1,2 m in size for various options of fastening is experimentally received. We suspect that load of one knot of fastening does not depend on the panel sizes, only on the knot device. For various ways of fastening design pressure of opening in case of a normal distribution of durability of clusters is defined. The criterion for assessment of effectiveness of the panels used as safety designs is received. This criterion determines the maximal pressure upon dive during opening. The received criterion confirms effectiveness a sandwich of panels as a safety design.

  11. Thermonuclear device

    International Nuclear Information System (INIS)

    Inoue, Toyokazu; Murata, Toru.

    1983-01-01

    Purpose: To shield superconducting coils for use in the generation of magnetic field against neutron irradiation thereby preventing tritium contamination. Constitution: The thermonuclear device comprises, in its inside, a vacuum container for containing plasmas, superconducting coils disposed to the outside of the vacuum container and neutron absorbers disposed between the super-conducting coils and the vacuum container. since neutrons issued from the plasma are absorbed by neutron absorbers and not irradiated to the superconducting coils, generation of tritium due to the reaction between 3 He in the liquid helium as the coolants for the super-conducting coils and the neutrons is prevented. (Aizawa, K.)

  12. Stabilization of LCD devices via geometric alteration.

    Science.gov (United States)

    Jeon, Il; Yoon, MinSung; Lee, Je-Hoon

    2013-02-20

    Glass bending in LCD displays is an inherent problem that has challenged many engineers. As a solution to this problem, we propose a methodology that can tackle the root of the phenomenon in terms of linear elastic beam theory. Using this hypothesis, we devised a background theory and a solution. In this paper, we present a glass panel to which geometrical changes, such as furrow, groove, and curb have been applied. These geometrical changes are applied to the nonactive area of the glass panel. To confirm the validity of our approach, we conducted simulation tests as well as hands-on experiments to observe the thermo-mechanical behavior of the device under various conditions. The simulation results using the Ansys simulator show that the proposed technique can reduce the deformation level of panel bending by 40%. In the experiment using a bare cell with polarizer films attached and with performing the high temperature reliability test, the deformation level of panel bending is reduced by half compared to the reference glass panel without any geometric alteration.

  13. Proposal of a computerized algorithm for continuous wave CO2 laser on-line control during orthopaedic surgery. Phase II: simplified algorithm version (LCA-s) and helmet-mounted data access device solution.

    Science.gov (United States)

    Canestri, F

    1997-08-01

    This paper is the continuation of the Phase I report published in 1992 by Canestri. It contains recent findings on how to speed-up the process of sublimated volume forecasting for a TEM11* CO2 laserbeam in CW mode following an original model proposed by the author--called LCA--here presented in a simplified version (LCA-s) on PMMA (polymethylmethacrilate) samples. Other interesting parameters, such as the time required to create the minimal injury vb along with its physical interpretations, are reported and explained. TEM11*, TEM01* and TEM00 beams profiles are also compared and discussed for LCA-s. The results of both Phase I and Phase II of this investigation can be integrated in one single solution package for the end-user, combining fast decisions making and operational features. The final part of this paper describes the 'helmet-mounted' data recall visor methodology which allows the surgeon to access to a data base for information retrieval during the course of an operation without interrupting the surgical case itself. This particularly interesting application allows the surgeon to consult a centrally-located data base which contains important information regarding similar clinical cases, choice of laserbeam profiles and focal lengths, simulation of beam behaviours, performances and other data. The on-line and direct access to the data base supports him in all those borderline situations in the O.R. in which the laser device type and configuration/calibration play a device role in the success of the operation. Also, the helmet-mounted display frees surgeon's hands in order to allow him to continue the operation while consulting the data base on-line, thus speeding up decision processes regarding changes of laser set-up, general calibration optimization and remote clinical consultancy.

  14. Monitoring and control system of charging batteries connected to a photovoltaic panel

    Science.gov (United States)

    Idzkowski, Adam; Leoniuk, Katarzyna; Walendziuk, Wojciech; Budzynski, Lukasz

    2015-09-01

    In this paper the off-grid photovoltaic system consisting of a PV panel, MMPT charge controller and battery is described. The realization of a laboratory stand for charging or discharging batteries is presented. Original monitoring and control system, which is based on LabVIEW software and LabJack DAQ device, has been built. Data acquisition part, arithmetic part and front panel of program created in LabVIEW are described. Some problems with implementation of this system, providing the monitoring of electrical parameters, are mentioned.

  15. 21 CFR 878.4810 - Laser surgical instrument for use in general and plastic surgery and in dermatology.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Laser surgical instrument for use in general and plastic surgery and in dermatology. 878.4810 Section 878.4810 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES GENERAL AND PLASTIC SURGERY DEVICES Surgical Devices § 878.4810 Laser...

  16. PERBANDINGAN UNJUK KERJA ANTARA PANEL SEL SURYA BERPENJEJAK DENGAN PANEL SEL SURYA DIAM

    Directory of Open Access Journals (Sweden)

    Syafaruddin Ch

    2010-07-01

    Full Text Available The ability to produce electrical energy at Solar Power Plant  is highly dependent on the magnitude and duration of sun exposure on the solar cell panels. The movement of the sun from east to west that periodicity in every day is a problem at  the  optimization generation of electricity at  Solar Power Plant   if using solar panel that motionless. This is because the solar cell panel can not catch the maximum sun exposure. To solve the above problem then designed a solar cell panel  tracker  capable of follo-wing the movements of the sun. Then conducted a test to see the performance of solar cell pa-nel  tracker  and compare it with the performance of solar cell panel was motionless. The testing doing along 6 days, with way to irradiate the panel of solar cells  tracker  and panels of solar cell motionless with sun exposure  along a  full day. Then the electric current generated each panel were recorded. The comparison of current then generating comparison of electric power delivery. The result show that the solar cell panel  tracker  produce the average current is 2.19 A whereas solar-cell panel still 1.97 A.  This result   indicate that average power for solar cell panel  tracker  39.41 W while for solar cell panel that motionless is  35.46 W. These results indicate that the performance of solar cell panel  tracker  better than  solar cell panel motionless.

  17. SRV-automatic handling device

    International Nuclear Information System (INIS)

    Yamada, Koji

    1987-01-01

    Automatic handling device for the steam relief valves (SRV's) is developed in order to achieve a decrease in exposure of workers, increase in availability factor, improvement in reliability, improvement in safety of operation, and labor saving. A survey is made during a periodical inspection to examine the actual SVR handling operation. An SRV automatic handling device consists of four components: conveyor, armed conveyor, lifting machine, and control/monitoring system. The conveyor is so designed that the existing I-rail installed in the containment vessel can be used without any modification. This is employed for conveying an SRV along the rail. The armed conveyor, designed for a box rail, is used for an SRV installed away from the rail. By using the lifting machine, an SRV installed away from the I-rail is brought to a spot just below the rail so that the SRV can be transferred by the conveyor. The control/monitoring system consists of a control computer, operation panel, TV monitor and annunciator. The SRV handling device is operated by remote control from a control room. A trial equipment is constructed and performance/function testing is carried out using actual SRV's. As a result, is it shown that the SRV handling device requires only two operators to serve satisfactorily. The required time for removal and replacement of one SRV is about 10 minutes. (Nogami, K.)

  18. Thermonuclear device

    International Nuclear Information System (INIS)

    Honda, Takuro; Maki, Koichi.

    1997-01-01

    The present invention provides a thermonuclear device, in which integrity of a measuring device is kept, the reactor wall temperature and wear of armour materials are monitored accurately even under intense radiation rays, so that the flow rate of coolants and plasma power can be controlled by using the signals. Infrared rays generated from the surface of the armour materials disposed on a first wall are detected to measure the reactor wall temperature. Coolant flow rate and plasma power are controlled based on the obtained reactor wall temperature. In addition, infrared rays generated from the back of the armour materials are detected to obtain the surface temperature in order to avoid intense radiation rays from plasmas. The coolant flow rate and the plasma power are controlled based on the obtained temperature on the surface of the reactor thereby controlling the temperature of the first wall and the armour material to 300degC or lower in a case of the first wall made of stainless steel and 1000degC or lower in a case of the armour material made of graphite. (I.S.)

  19. Scalable devices

    KAUST Repository

    Krüger, Jens J.

    2014-01-01

    In computer science in general and in particular the field of high performance computing and supercomputing the term scalable plays an important role. It indicates that a piece of hardware, a concept, an algorithm, or an entire system scales with the size of the problem, i.e., it can not only be used in a very specific setting but it\\'s applicable for a wide range of problems. From small scenarios to possibly very large settings. In this spirit, there exist a number of fixed areas of research on scalability. There are works on scalable algorithms, scalable architectures but what are scalable devices? In the context of this chapter, we are interested in a whole range of display devices, ranging from small scale hardware such as tablet computers, pads, smart-phones etc. up to large tiled display walls. What interests us mostly is not so much the hardware setup but mostly the visualization algorithms behind these display systems that scale from your average smart phone up to the largest gigapixel display walls.

  20. Thermonuclear device

    International Nuclear Information System (INIS)

    Kobayashi, Noriyuki.

    1994-01-01

    In a thermonuclear device, a protrusion is protruded the direction to point X of a separatrix of magnetic fields and oscillated. Further, a protrusion continuous in the toroidal direction is formed from a first wall toward the point X and the position for the point X is oscillated in perpendicular to the divertor. If moving widths are compared for the shape of each of the divertors, it is longest in the case of the protruded shape, and a sweeping speed in a collision region is greatest in a case of the protruded shape and the moving width can be increased for the moving time and moving width of the identical point X. Accordingly, fluctuation of the magnetic fields of the divertor coils can relatively be reduced. A high heat receiving portion of the surface of the divertor can be made sufficiently great and moved rapidly with less oscillation width for the point X, thereby enabling to suppress AC loss of superconductors of toroidal coils and keep a stable superconductive state. Further, the divertor can be kept from melting, to attain a reliable thermonuclear device. (I.S.)