Sample records for surfactants cetyltrimethylammonium bromide

  1. The effects of cetyltrimethylammonium bromide surfactant on alumina modified zinc oxides

    Energy Technology Data Exchange (ETDEWEB)

    Gac, Wojciech, E-mail: [Department of Chemical Technology, Faculty of Chemistry, Maria Curie-Sklodowska University, 3 M. Curie-Sklodowska Sq., 20-031 Lublin (Poland); Zawadzki, Witold; Słowik, Grzegorz; Pawlonka, Justyna; Machocki, Andrzej [Department of Chemical Technology, Faculty of Chemistry, Maria Curie-Sklodowska University, 3 M. Curie-Sklodowska Sq., 20-031 Lublin (Poland); Lipke, Agnieszka; Majdan, Marek [Department of Inorganic Chemistry, Faculty of Chemistry, Maria Curie-Sklodowska University, 2 M. Curie-Sklodowska Sq., 20-031 Lublin (Poland)


    Highlights: • Synthesis of novel ZnO−Al{sub 2}O{sub 3} oxides in the presence of CTAB surfactant. • Determination of the structural, surface and optical properties. • Nanocrystalline, high-surface area ZnO−Al{sub 2}O{sub 3} oxides. • ZnO-Al{sub 2}O{sub 3} materials of different gap energy. - Abstract: Novel alumina modified zinc oxide materials were prepared by co-precipitation method in the presence of different amounts of cetyltrimethylammonium bromide (CTAB) surfactant. X-ray diffraction, {sup 27}Al magic-angle spinning Nuclear Magnetic Resonance Spectroscopy, and transmission electron microscopy studies evidenced formation of 10–15 nm zinc oxide nanoparticles in the presence of the small amounts of surfactant. Amorphous alumina and zinc aluminate phases of different coordination environment of Al sites were identified. An increase of surfactant concentration led to the elongation of nanoparticles and changes of the nature of hydroxyl groups. Precipitation in the high CTAB concentration conditions facilitated formation of mesoporous materials of high specific surface area. The materials were composed of very small (2–3 nm) zinc aluminate spinel nanoparticles. High concentration of CTAB induced widening of band gap energy.

  2. Investigation of Surfactant-Stain-Metal Interaction: Naphthochrome Green/Cetyltrimethylammonium Bromide/Rare Earths Ternary Complexation

    Institute of Scientific and Technical Information of China (English)

    郑立新; 沈荣; 郜洪文


    The ternary interaction of naphthochrome green (NCG) with cetyltrimethylammonium bromide (CTAB) and rare earths (Res: Yb, Dy, Er and Eu) has been investigated with the microsurface adsorption-spectral correction technique (MSASC). The aggregation of NCG on CTAB obeys the Langmuir isothermal adsorption. The enrichment of NCG on CTAB and the presence of NaCl sensitize the complexation between Res and NCG. Both the binary aggregate and the ternary complex were characterized in the presence and absence of NaCl at pH 8.30 at 20 and 40℃.

  3. Antibacterial Activity of Cetyltrimethylammonium Bromide Modified Silver-Bentonite


    Nik Malek Nik Ahmad Nizam; Azalisa Wan Nur; Yieh Lin Clara Chong


    Organo-Ag-bentonite was prepared by the attachment of cationic surfactant cetyltrimethylammonium bromide on silver(A)g-exchanged bentonite. The prepared samples were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy and energy dispersive X-ray (EDX) analysis and antibacterial assay was performed against Escherichia coli in different percentage of saline solutions through minimum inhibition concentration (MIC) method. Organo-Ag-bentonite showed higher ant...

  4. Isotachophoretic separation of cetyltrimethylammonium bromide. (United States)

    Praus, Petr


    Capillary isotachophoresis (ITP), equipped with the conductivity detection, was tested for the separation of cetyltrimethylamonium (CTMA) bromide. To prevent adsorption of CTMA to the capillary walls, several neutral polymers and ethanol were added into the leading electrolytes. Unlike polymer additives, the CTMA free monomers and micelles, created as a result of the isotachophoretic concentration effect, were recognised in the presence of ethanol from 10 to 25% (v/v). At 30% of ethanol, only a single zone of CTMA monomer was registered because the micellization process did not take place under this condition. Employing an ITP apparatus in the column-coupling configuration, the operational system with 30% of ethanol was tested for the determination of CTMA in hair conditioners. The achieved detection limits were about 0.02mM. Both model solutions and real samples of hair conditioners were analysed with the precision about R.S.D. = 3%. One analysis in the column-coupled system takes circa 15min.

  5. Antibacterial Activity of Cetyltrimethylammonium Bromide Modified Silver-Bentonite

    Directory of Open Access Journals (Sweden)

    Nik Malek Nik Ahmad Nizam


    Full Text Available Organo-Ag-bentonite was prepared by the attachment of cationic surfactant cetyltrimethylammonium bromide on silver(Ag-exchanged bentonite. The prepared samples were characterized by X-ray diffraction (XRD, Fourier transform infrared (FTIR spectroscopy and energy dispersive X-ray (EDX analysis and antibacterial assay was performed against Escherichia coli in different percentage of saline solutions through minimum inhibition concentration (MIC method. Organo-Ag-bentonite showed higher antibacterial activity than organo-bentonite and Ag-bentonite especially in saline solution suggesting that the precipitation of AgCl in the presence of Ag-bentonite in saline solution could be avoided by the attachment of cationic surfactant on Ag-bentonite surfaces, hence increased their antibacterial activity.

  6. Silica nanoparticles separation from water: aggregation by cetyltrimethylammonium bromide (CTAB). (United States)

    Liu, Y; Tourbin, M; Lachaize, S; Guiraud, P


    Nanoparticles will inevitably be found in industrial and domestic wastes in the near future and as a consequence soon in water resources. Due to their ultra-small size, nanoparticles may not only have new hazards for environment and human health, but also cause low separation efficiency by classical water treatments processes. Thus, it would be an important challenge to develop a specific treatment with suitable additives for recovery of nanoparticles from waters. For this propose, this paper presents aggregation of silica nanoparticles (Klebosol 30R50 (75nm) and 30R25 (30nm)) by cationic surfactant cetyltrimethylammonium bromide (CTAB). Different mechanisms such as charge neutralization, "depletion flocculation" or "volume-restriction", and "hydrophobic effect" between hydrocarbon tails of CTAB have been proposed to explicate aggregation results. One important finding is that for different volume concentrations between 0.05% and 0.51% of 30R50 suspensions, the same critical coagulation concentration was observed at CTAB=0.1mM, suggesting the optimized quantity of CTAB during the separation process for nanoparticles of about 75nm. Furthermore, very small quantities of CTAB (0.01mM) can make 30R25 nanosilica aggregated due to the "hydrophobic effect". It is then possible to minimize the sludge and allow the separation process as "greener" as possible by studying this case. It has also shown that aggregation mechanisms can be different for very small particles so that a special attention has to be paid to the treatment of nanoparticles contained in water and wastewaters.

  7. The study of furfural removal from aqueous solutions using activated carbon and bentonite modified with cetyltrimethylammonium bromide (CTAB, a cationic surfactant

    Directory of Open Access Journals (Sweden)

    M Leili


    Full Text Available Background and Objectives: Furfural is one of the toxic chemical compounds used in many industries such as petrochemical, food, paper products, pharmaceutical, etc., due to having some characteristics. Therefore, furfural could be found at different concentrations in the effluent from these industries and can enter the environment. Hence, the aim of this study was the assessment the efficiency of a low cost bentonite modified with cationic surfactant in the removal of furfural from aqueous solution. Material and Methods: In this experimental study, bentonite was purchased from one of the Mines of Zanjan Province, Iran and then the efficiency of bentonite modified with the cationic surfactant CTAB (CTAB-Bent was assessed in the adsorption of furfural from aqueous solution. Activated carbon (AC was also purchased as commercial grade. Results: Under optimum conditions, the removal efficiency of AC and CTAB-Bent was about 52 and 66%, respectively. For both adsorbents used in this study, the increase of contact time and sorbent dosage resulted in increasing the removal efficiency, but the removal efficiency was decreased with the increase of furfural initial concentrations. Regarding pH, the removal efficiency was the highest in relative acidic and neutral environment, (60 and 69% for AC and CTAB-Bent respectively. The kinetics studies revealed that the highest correlation coefficients were obtained for the pseudo-second order rate kinetic model. Adsorption data from both adsorbents was also fitted with Langmuir isotherm.   Conclusion: It was found that modified bentonite with CTAB as a natural adsorbent could have better efficiencies compared with activated carbon in the furfural removal, although more contact times is needed.

  8. Improved hydrogen evolution on glassy carbon electrode modified with novel Pt/cetyltrimethylammonium bromide nanoscale aggregates

    Institute of Scientific and Technical Information of China (English)

    Jahan-Bakhsh Raoof; Sayed Reza Hosseini; Seyedeh Zeinab Mousavi-Sani


    A novel, cost‐effective, and simple electrocatalyst based on a Pt‐modified glassy carbon electrode (GCE), using cetyltrimethylammonium bromide (CTAB) as a cationic surfactant, is reported. Am‐phiphilic CTAB molecules were adsorbed on GCE by immersion in a CTAB solution. The positively charged hydrophilic layer, which consisted of small aggregates of average size less than 100 nm, was used for accumulation and complexation of [PtCl6]2− anions by immersing the electrode in K2PtCl6 solution. The modified electrode was characterized using scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, impedance spectroscopy, and electrochemical methods. The electrocatalytic activity of the Pt particles in the hydrogen evolution reaction (HER) was investigat‐ed. The results show that the CTAB surfactant enhances the electrocatalytic activity of the Pt parti‐cles in the HER in acidic solution.

  9. Examination of surface adsorption of cetyltrimethylammonium bromide and sodium dodecyl sulfate. (United States)

    Nakahara, Hiromichi; Shibata, Osamu; Moroi, Yoshikiyo


    Several pieces of experimental evidence of condensation of soluble surfactant molecules, cetyltrimethylammonium bromide (CTAB) and sodium dodecyl sulfate (SDS), into the air/water surface region from the bulk solution are presented at different added salt concentrations in order to substantiate that the concentrated molecules do not locate just at the air/solution interface. The insoluble monolayer just at the air/subphase interface for the two surfactants could be studied by surface pressure (π) versus molecular surface area (A), surface potential (ΔV) versus the area (A), infrared absorption of the surface region, and BAM (Brewster angle microscope) image. From surface tension versus concentration curves for the two surfactant solutions, the apparent molecular surface area and the cmc values were determined at different added salt concentrations, and the degree of counterion binding to micelle was found to be 0.70 and 0.73 for CTAB and SDS, respectively. Further examination was made on infrared absorption from the surface region of the surfactant solutions and on BAM images of the surface planes in order to examine the difference between the insoluble monolayer and the condensation in the surface region. Finally, the new concept of bilayer or bilamellar aggregate for soluble surfactant solutions is presented together with the former experimental evidence, which is consistent with several interfacial phenomena of the surfactant solutions.

  10. Micellization of cetyltrimethylammonium bromide: effect of small chain Bola electrolytes. (United States)

    Pan, Animesh; Sil, Pallabi; Dutta, Sounak; Das, Prasanta Kumar; Bhattacharya, Subhash Chandra; Rakshit, Animesh Kumar; Aswal, Vinod Kumar; Moulik, Satya Priya


    Sodium dicarboxylates (or Bola salts) with methylene spacers 0, 2, 4, 6, 8, and 10 were studied in aqueous solution to investigate their influence on the micellization of cetyltrimethylammonium bromide (CTAB). Since bolas with spacer length ≤12 are known not to micellize in general, the herein used sodium dicarboxylates were treated as 2:1 amphiphilic electrolytes which reduced surface tension of water (except sodium oxalate with zero spacer) without self-association. Their concentration dependent conductance was also linear without breaks. The bolas affected the micellization of CTAB but acted like salts to decrease its CMC. Their combinations did not form bilayer aggregates as found in vesicles. Nevertheless, they synergistically interacted with CTAB at the air/water interface as revealed from Rosen's thermodynamic model. Hydrodynamic radius (Rh), Zeta-potential (ζ), and electrical double layer behavior of bola interacted CTAB micelles were assessed. From SANS measurements, micelle shape, shape parameters, aggregation number (Nagg), surface charge of the bola influenced CTAB micelles were also determined. NMR study as well supported the non-mixing of bolas with the CTAB micelles. They interacted in solution like "amphiphilic electrolytes" to influence the surface and micelle forming properties of CTAB.

  11. Precipitation, stabilization and molecular modeling of ZnS nanoparticles in the presence of cetyltrimethylammonium bromide. (United States)

    Praus, Petr; Dvorský, Richard; Horínková, Petra; Pospíšil, Miroslav; Kovář, Petr


    ZnS nanoparticles were precipitated in aqueous dispersions of cationic surfactant cetyltrimethylammonium bromide (CTAB). The sphere radii of ZnS nanoparticles calculated by using band-gap energies steeply decreased from 4.5 nm to 2.2 nm within CTAB concentrations of 0.4-1.5 mmol L(-1). Above the concentration of 1.5 mmol L(-1), the radii were stabilized at R=2.0 nm and increased up to R=2.5 nm after 24 h. The hydrodynamic diameters of CTAB-ZnS structures observed by the dynamic light scattering (DLS) method ranged from 130 nm to 23 nm depending on CTAB concentrations of 0.5-1.5 mmol L(-1). The complex structures were observed by transmission electron microscopy (TEM). At the higher CTAB concentrations, ZnS nanoparticles were surrounded by CTA(+) bilayers forming positively charged micelles with the diameter of 10nm. The positive zeta-potentials of the micelles and their agglomerates were from 16 mV to 33 mV. Wurtzite and sphalerite nanoparticles with R=2.0 nm and 2.5 nm covered by CTA(+) were modeled with and without water. Calculated sublimation energies confirmed that a bilayer arrangement of CTA(+) on the ZnS nanoparticles was preferred to a monolayer. Copyright © 2012 Elsevier Inc. All rights reserved.

  12. Application of cetyltrimethylammonium bromide bentonite-titanium dioxide photocatalysis technology for pretreatment of aging leachate. (United States)

    Cai, Fei-Fei; Yang, Zhao-Hui; Huang, Jing; Zeng, Guang-Ming; Wang, Li-Ke; Yang, Jian


    Organobentonite-photocatalysis technology was applied to pretreat aging leachate containing refractory pollutants. The organobentonite was synthesized by organic modifier cetyltrimethylammonium bromide (CTMAB) and natural bentonite. In characterization experiments, we could confirm that organic functional groups of cetyltrimethylammonium (CTMA(+)) cations were successfully loaded on the surface of bentonite. The combination of CTMAB2.5 adsorption and TiO2 photocatalysis was superior to either running separately. Furthermore, removal efficiency of simultaneously utilizing CTMAB2.5 and TiO2 was better than them in succession. The combination technology was feasible and was optimized by response surface methodology (RSM) with COD and NH3-N removal rate as the target responses. The optimal operation conditions calculated from the regression equations were CTMAB2.5 dosage of 7.5 g/L, pH at 3.5, TiO2 dosage of 1.63 g/L, and reaction time for 60.02 min, which maintained the removal of COD and NH3-N at 82% and 37%, respectively.

  13. Determination of critical micelle concentration of cetyltrimethylammonium bromide: Different procedures for analysis of experimental data

    Directory of Open Access Journals (Sweden)

    Goronja Jelena M.


    Full Text Available Conductivity of two micellar systems was measured in order to determine critical micelle concentration (CMC of cetyltrimethylammonium bromide (CTAB. Those systems were: CTin water and CTin binary mixture acetonitrile (ACN-water. Conductivity (κ-concentration (c data were treated by four different methods: conventional method, differential methods (first and second derivative and method of integration (methods A-D, respectively. As CTin water micellar system shows a sharp transition between premicellar and postmicellar part of the κ/c curve, any of the applied methods gives reliable CMC values and there is no statistically significant difference between them. However, for CTin ACN-water mixture micellar system the integration method for CMC determination is recommended due to a weak curvature of κ/c plot.

  14. Cellulose nanocrystals as templates for cetyltrimethylammonium bromide mediated synthesis of Ag nanoparticles and their novel use in PLA films. (United States)

    Yalcinkaya, E E; Puglia, D; Fortunati, E; Bertoglio, F; Bruni, G; Visai, L; Kenny, J M


    In the present paper, we reported how cellulose nanocrystals (CNC) from microcrystalline cellulose have the capacity to assist in the synthesis of metallic nanoparticles chains. A cationic surfactant, cetyltrimethylammonium bromide (CTAB), was used as modifier for CNC surface. Silver nanoparticles were synthesized on CNC, and nanoparticle density and size were optimized by varying concentrations of nitrate and reducing agents, and the reduction time. The experimental conditions were optimized for the synthesis and the resulting Ag grafted CNC (Ag-g-CNC) were characterized by means of TGA, SEM, FTIR and XRD, and then introduced in PLA matrix. PLA nanocomposite containing silver grafted cellulose nanocrystals (PLA/0.5Ag-g-1CNC) was characterized by optical and thermal analyses and the obtained data were compared with results from PLA nanocomposites containing 1% wt. of CNC (PLA/1CNC), 0.5% wt. of silver nanoparticles (PLA/0.5Ag) and hybrid system containing CNC and silver in the same amount (PLA/1CNC/0.5Ag). The results demonstrated that grafting of silver nanoparticles on CNC positively affected the thermal degradation process and cold crystallization processes of PLA matrix. Finally, the antibacterial activity of the different systems was studied at various incubation times and temperatures, showing the best performance for PLA/1CNC/0.5Ag based nanocomposite. Copyright © 2016 Elsevier Ltd. All rights reserved.

  15. Sensitive and selective turn-on fluorescence method for cetyltrimethylammonium bromide determination based on acridine orange-polystyrene sulfonate complex. (United States)

    Li, Na; Hao, Xia; Kang, Bei Hua; Li, Nian Bing; Luo, Hong Qun


    This work proposed a rapid and novel fluorescence-sensing system using a complex of acridine orange (AO) and polystyrene sulfonate (PSS) to sensitively recognize and monitor cetyltrimethylammonium bromide (CTAB) in an aqueous medium. AO can interact with PSS and a complex is formed via electrostatic attraction and hydrophobic interaction. The fluorescence of AO is greatly quenched after the introduction of PSS. Upon its subsequent addition, CTAB can interact and form a complex with PSS because the electrostatic attraction between CTAB and PSS is much stronger than that between AO and PSS, which results in significant fluorescence recovery. Interestingly, the proposed method can be applied for the discrimination and detection of surfactants with different hydrocarbon chain lengths due to their different binding affinity toward PSS. The detection limit for CTAB is as low as 0.2 µg/mL and the linear range is from 0.5 to 3.5 µg/mL. Moreover, we applied the sensor to the successful detection of CTAB in water samples. Copyright © 2015 John Wiley & Sons, Ltd.

  16. The Effect of Sodium Dodecyl Sulfate (SDS and Cetyltrimethylammonium Bromide (CTAB on the Properties of ZnO Synthesized by Hydrothermal Method

    Directory of Open Access Journals (Sweden)

    Yun Hin Taufiq-Yap


    Full Text Available ZnO nanostructures were synthesized by hydrothermal method using different molar ratios of cetyltrimethylammonium bromide (CTAB and Sodium dodecyl sulfate (SDS as structure directing agents. The effect of surfactants on the morphology of the ZnO crystals was investigated by field emission scanning electron microscopy (FESEM and transmission electron microscopy (TEM techniques. The results indicate that the mixture of cationic-anionic surfactants can significantly modify the shape and size of ZnO particles. Various structures such as flakes, sheets, rods, spheres, flowers and triangular-like particles sized from micro to nano were obtained. In order to examine the possible changes in other properties of ZnO, characterizations like powder X-ray diffraction (PXRD, thermogravimetric and differential thermogravimetric analysis (TGA-DTG, FTIR, surface area and porosity and UV-visible spectroscopy analysis were also studied and discussed.

  17. Influence of Low Cetyltrimethylammonium Bromide Concentration on the Interactions and Properties of Hemoglobin with Acyclovir

    Institute of Scientific and Technical Information of China (English)

    LIU Tian-Qing; GUO Rong


    The effects of cetyltrimethylammonium bromide (CTAB) on the properties of hemoglobin (Hb) at low CTAB concentration were studied in Hb/acyclovir/CTAB system by the methods of UV-Vis spectrum, fluorescence, zeta potential, conductivity and negative-staining transmission electron microscope (TEM). With the increase of CTAB concentration, the UV peak intensity at 276 nm, the intrinsic fluorescence, the zeta potential of Hb and the system conductivity were all enhanced. Hb was easily oxidized to oxyHb and hemichrome. In Hb/acyclovir/CTAB system,CTAB made the UV-Vis spectrum, fluorescence, conductivity and conformation of Hb tend to be returned to those of the original Hb but the zeta potential not to do so. The UV absorption peak of Hb-acyclovir complex disappeared,and the tight structure of Hb aroused by acyclovir was refolded. When CTAB concentration was higher than 5 ×10-5 mol/L, the two absorption peaks at 536 and 576 nm appeared again, and the Hb structure became looser again.

  18. Sedimentation stability and aging of aqueous dispersions of Laponite in the presence of cetyltrimethylammonium bromide (United States)

    Savenko, V.; Bulavin, L.; Rawiso, M.; Loginov, M.; Vorobiev, E.; Lebovka, N. I.


    This work discusses the sedimentation stability and aging of aqueous suspensions of Laponite in the presence of cetyltrimethylammonium bromide (CTAB). The concentration of Laponite was fixed at a constant level Cl=2 %wt, which corresponds to the threshold between equilibrium gel IG1 and glass IG2 states. The concentration of CTAB Cs was within 0-0.3 %wt. In the presence of CTAB, the Laponite aqueous suspensions were unstable against sedimentation and separated into the upper and bottom layers (U and B layers, respectively). The dynamic light-scattering technique has revealed that addition of CTAB even at a rather small concentration, Cs=0.0164 %wt (0.03 cation exchange capacity), induced noticeable changes in the aging dynamics of the U layer. It was explained by equilibration of CTAB molecules that were initially nonuniformly distributed between different Laponite particles. Accelerated stability analysis by means of analytical centrifugation with rotor speed ω=500-4000 rpm revealed three sedimentation regimes: continuous (I, Cs0.2 %wt). It was demonstrated that the B layer was “soft” in the zonelike regime. The increase of ω resulted in its supplementary compressing and collapse of “soft” sediment above certain critical centrifugal acceleration. The physical nature of the observed behavior, accounting for enhancement of hydrophobic interactions between Laponite particles, is discussed.

  19. Efficient bacteria capture and inactivation by cetyltrimethylammonium bromide modified magnetic nanoparticles. (United States)

    Jin, Yinjia; Deng, Jun; Liang, Jialiang; Shan, Chao; Tong, Meiping


    Functionalized magnetic nanoparticles have shown great application potentials in water treatment processes especially for bacterial removal. Antibacterial agent, cetyltrimethylammonium bromide (CTAB), was employed to modify Fe3O4 nanoparticles to fabricate bactericidal paramagnetic nanoparticles (Fe3O4@CTAB). The as-prepared Fe3O4@CTAB could effectively capture both Gram-negative Escherichia coli and Gram-positive Bacillus subtilis from water. For both cell types, more than 99% of bacteria with initial concentration of 1.5 × 10(7)CFU/mL could be inactivated by Fe3O4@CTAB (0.5 g/L) within 60 min. Fe3O4@CTAB could remove more than 99% of cells over a wide pH (from 3 to 10) and solution ionic strength range (from 0 to 1000 mM). The copresence of sulfate and nitrate did not affect the bacterial capture efficiencies, whereas, phosphate and silicate slightly decreased the bacterial removal rates. However, more than 91% and 81% of cells could be captured at 10mM of phosphate and silicate, respectively. Over 80% of cells could be removed even in the presence of 10mg/L of humic acid. Moreover, Fe3O4@CTAB exhibited good reusability, and greater than 83% of cells could be captured even in the fifth regeneration cycle. Fe3O4@CTAB prepared in this study have great application potentials for water disinfection.

  20. Removal of hexavalent chromium by using red mud activated with cetyltrimethylammonium bromide. (United States)

    Li, Deliang; Ding, Ying; Li, Lingling; Chang, Zhixian; Rao, Zhengyong; Lu, Ling


    The removal of hexavalent chromium [Cr(VI)] from aqueous solution by using red mud activated with cetyltrimethylammonium bromide (CTAB) was studied. The optimum operation parameters, such as CTAB concentration, pH values, contact time, and initial Cr(VI) concentration, were investigated. The best concentration of CTAB for modifying red mud was found to be 0.50% (mCTAB/VHCl,0.6 mol/L). The lower pH (Red mud activated with CTAB can greatly improve the removal ratio of Cr(VI) as high as four times than that of original red mud. Adsorption equilibrium was reached within 30 min under the initial Cr(VI) concentration of 100 mg L(-1). The isotherm data were analysed using Langmuir and Freundlich models. The adsorption of Cr(VI) on activated red mud fitted well to the Langmuir isotherm model, and the maximum adsorption capacity was estimated as 22.20 mg g(-1) (Cr/red mud). The adsorption process could be well described using the pseudo-second-order model. The result shows that activated red mud is a promising agent for low-cost water treatment.

  1. Spectroscopic study on the interaction of Bacillus subtilis {alpha}-amylase with cetyltrimethylammonium bromide

    Energy Technology Data Exchange (ETDEWEB)

    Omidyan, R., E-mail: [Department of Chemistry, University of Isfahan, Isfahan 81746-73441 (Iran, Islamic Republic of); Department of Chemistry, Institute for Advanced Studies in Basic Sciences (IASBS), Zanjan 45137-66731 (Iran, Islamic Republic of); Kazemi, S.H. [Department of Chemistry, Institute for Advanced Studies in Basic Sciences (IASBS), Zanjan 45137-66731 (Iran, Islamic Republic of); Bordbar, A.K. [Department of Chemistry, University of Isfahan, Isfahan 81746-73441 (Iran, Islamic Republic of); Zaynalpour, S. [Department of Chemistry, Institute for Advanced Studies in Basic Sciences (IASBS), Zanjan 45137-66731 (Iran, Islamic Republic of)


    The interaction between {alpha}-amylase from Bacillus subtilis and cetyltrimethylammonium bromide (CTAB) has been investigated at various temperature conditions using fluorescence and circular dichroism (CD) spectroscopic methods. Fluorescence data revealed that the fluorescence quenching of {alpha}-amylase by CTAB is the result of complex formation between CTAB and {alpha}-amylase. The thermodynamic analysis on the binding interaction data shows that the interactions are strongly exothermic ({Delta}H{sup o}=-17.92 kJ mol{sup -1}) accompanied with increase in entropy ({Delta}S{sup o} between 109 to 135 J mol{sup -1} K{sup -1}). Thus the binding of CTAB to {alpha}-amylase is both enthalpic and entropic driven, which represent the predominate role of both electrostatic and hydrophobic interactions in complex formation process. The values of 2.17x10{sup -3} M{sup -1} and 1.30 have been obtained from associative binding constant (K{sub a}) and stoichiometry of binding number (n), from analysis of fluorescence data, respectively. Circular dichroism spectra showed the substantial conformational changes in secondary structure of {alpha}-amylase due to binding of CTAB, which represents the complete destruction of both secondary and tertiary structure of {alpha}-amylase by CTAB. - Research highlights: {yields} The Fluorescence quenching effect of {alpha}-amylase by CTAB is a consequence of formation {alpha}-amylase-CTAB complex. {yields} The {alpha}-helical analyzing from the CD spectra in the various concentration of CTAB shows strongly deformation of {alpha}-amylase. {yields} Thermodynamic analysis of quenching verify that the interactions are both enthalpy and entropic driven.

  2. Combination of selected enzymes with cetyltrimethylammonium bromide in biofilm inactivation, removal and regrowth

    KAUST Repository

    Araújo, Paula A.


    Enzymes are considered an innovative and environmentally friendly approach for biofilm control due to their lytic and dispersal activities. In this study, four enzymes (β-glucanase, α-amylase, lipase and protease) were tested separately and in combination with the quaternary ammonium compound cetyltrimethylammonium bromide (CTAB) to control flow-generated biofilms of Pseudomonas fluorescens. The four enzymes caused modest reduction of biofilm colony forming units (CFU). Protease, β-glucanase and α-amylase also caused modest biofilm removal. CTAB combined with either β-glucanase or α-amylase increased biofilm removal. Its combination with either β-glucanase or protease increased CFU reduction. However, CTAB−protease combination was antagonist in biofilm removal. Long-term effects in biofilm mass reduction were observed after protease exposure. In contrast, biofilms treated with β-glucanase were able to regrowth significantly after exposure. Moreover, short-term respirometry tests with planktonic cells were performed to understand the effects of enzymes and their combination with CTAB on P. fluorescens viability. Protease and lipase demonstrated antimicrobial action, while α-amylase increased bacterial metabolic activity. The combination of CTAB with either protease or α-amylase was antagonistic, decreasing the antimicrobial action of CTAB. The overall results demonstrate a modest effect of the selected enzymes in biofilm control, either when applied alone or each one in combination with CTAB. Total biofilm removal or CFU reduction was not achieved and, in some cases, the use of enzymes antagonized the effects of CTAB. The results also propose that complementary tests, to characterize biofilm integrity and microbial viability, are required when someone is trying to assess the role of novel biocide - enzyme mixtures for effective biofilm control.

  3. Determination of Residual Nonsteroidal Anti-Inflammatory Drugs in Aqueous Sample Using Magnetic Nanoparticles Modified with Cetyltrimethylammonium Bromide by High Performance Liquid Chromatography

    Directory of Open Access Journals (Sweden)

    Malihe Khoeini Sharifabadi


    Full Text Available A simple and sensitive solid-phase extraction method for separation and preconcentration of trace amount of four nonsteroidal anti-inflammatory drugs (naproxen, indomethacin, diclofenac, and ibuprofen using Fe3O4 magnetic nanoparticles modified with cetyltrimethylammonium bromide has been developed. For this purpose, the surface of MNPs was modified with cetyltrimethylammonium bromide (CTAB as a cationic surfactant. Effects of different parameters influencing the extraction efficiency of drugs including the pH, amount of salt, shaking time, eluent type, the volume of solvent, amount of adsorbent, sample volume, and the time of desorption were investigated and optimized. Methanol has been used as desorption solvent and the extracts were analysed on a reversed-phase octadecyl silica column using 0.02 M phosphate-buffer (pH = 6.02 acetonitrile (65 : 35 v/v as the mobile phase and the effluents were measured at 202 nm with ultraviolet detector. The relative standard deviation (RSD% of the method was investigated at three concentrations (25, 50, and 200 ng/mL and was in the range of 3.98–9.83% (n=6 for 50 ng/mL. The calibration curves obtained for studied drugs show reasonable linearity (R2>0.99 and the limit of detection (LODs ranged between 2 and 7 ng/mL. Finally, the proposed method has been effectively employed in extraction and determination of the drugs in biological and environmental samples.

  4. Catalytic Effect of Cetyltrimethylammonium Bromide on the Oxidation of Triethylene glycol by Chloramine-T in Acidic Medium

    Directory of Open Access Journals (Sweden)

    Vandana Sharma


    Full Text Available The kinetics and mechanism of cetyltrimethylammonium bromide catalyzed oxidation of triethylene glycol [2,2'-ethylene diqxybis(ethanol] by chloramine-T in acidic acid medium have been investigated. The reaction is first order dependence on chloramine-T and fractional order for triethylene glycol with excess concentration of other reactants. The catalytic effect due to cetyletrimethylammonium bromide has been studied. The small salt effect and increase in the reaction rate with increasing dielectric constant suggest the involvement of neutral molecule in the rate-determining step. The addition of p-toluene sulfonamide retards the reaction rate. The effect of chloride ion on the reaction also studied. The effect of temperature on the reaction has been investigated in the temperature range 313-333K and thermodynamic parameters were calculated from the Arrhenious plot. A tentative mechanism consistent with the experimental results has been proposed.

  5. Modified magnetite nanoparticles with cetyltrimethylammonium bromide as superior adsorbent for rapid removal of the disperse dyes from wastewater of textile companies

    Directory of Open Access Journals (Sweden)

    Ali Asghar Rajabi


    Full Text Available This paper reports application of cetyltrimethylammonium bromide (CTAB coated magnetite nanoparticles (Fe3O4 NPs as a novel adsorbent for removal of two types of disperse dyes, including disperse red 167, and disperse blue 183, from wastewater of textile companies. The effect of parameters including type of surfactant, pH of solution, surfactant concentration, and amount of salt, was investigated and optimized. The obtained results showed that the ratio of initial dye concentration to CTAB amounts has critical effect on removal processes so that removal efficiencies higher than 95% can be achieved even at high concentration of dyes as high as 500 mg l-1 when the ratio is optimum. Removal of dyes is very fast, and equilibrium is reached at times less than 10 min even for high concentration of the dyes. Very high adsorbent capacity (as high as 2000 mg g-1 was yielded for maximum tested concentration of the dyes (500 mg g-1. The obtained result was confirmed by thermogravimetric analysis data. This study showed that CTAB coated Fe3O4 NPs is a very efficient adsorbent for removal of dyes from wastewater of textile companies and has high capacity under optimum conditions.

  6. A kinetic study of the thermal degradation of cetyltrimethylammonium bromide inside the mesoporous SBA-3 molecular sieve

    Directory of Open Access Journals (Sweden)



    Full Text Available The thermal degradation of cetyltrimethylammonium bromide (CTMAB inside the mesoporous SBA-3 was studied under non-isothermal conditions. There are two distinct and complex kinetic processes which partly overlap, each consisting of one dominant and three minor individual processes. The two dominant processes can be described by the Sestak–Berggren model. The main decomposition step (the first dominant process involves the overcoming of weak interactions between CTMAB and the silica network and proceeds with a lower Ea value (116±2 kJ mol‑1 than the second dominant process (153±5 kJ mol-1, which can be explained by the size reduction of the pore openings due to the contraction of the SBA-3 unit cell caused by the removal of CTMAB.

  7. The separation of silica nanoparticle by cetyltrimethylammonium bromide from decontamination foam waste

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Man Soo; Yoon, In Ho; Jung, Chong Hun; Moon, Jei Kwon; Choi, Wang Kyu [KAERI, Daejeon (Korea, Republic of)


    Decontamination foam has been considered as a potential application for the cleaning of radioactive contaminant in the field of metallic walls, overhead surfaces, and complex components. Moreover, foam decontamination could generate the low secondary waste amount owing to its volume expansion. In order to increase the decontamination efficiency, it is essential to improve the foam stability with low amount of chemical decontamination agent. Yoon et al. reported that the silica nanoparticle containing surfactant increased the foam stability compared to only surfactant solution[3]. Nanoparticle has been used with surfactant, which they adsorb at fluid/fluid interface, to stabilize emulsions or bubbles in foams. Despite of improving foam stability, they still used the surfactant, silica nanoparticle (1 wt%), and viscosifier. In addition, it is difficult to separate silica nanoparticle from decontamination solution. Because nanoparticles differ from classical solid particles due to smaller particle size and their specific properties. Thus, the separation method for nanoparticle should be also developed with high recovery rates. The flocculation of silica nanoparticle added by CTAB could be quickly achieved for only 30 min. The particle size of SiO{sub 2} was larger as CTAB amount increased, and SiO{sub 2} contents in the top solution were decreased after centrifugation.

  8. A sensitive electrochemical chlorophenols sensor based on nanocomposite of ZnSe quantum dots and cetyltrimethylammonium bromide. (United States)

    Li, Jianjun; Li, Xiao; Yang, Ran; Qu, Lingbo; Harrington, Peter de B


    In this work, a very sensitive and simple electrochemical sensor for chlorophenols (CPs) based on a nanocomposite of cetyltrimethylammonium bromide (CTAB) and ZnSe quantum dots (ZnSe-CTAB) through electrostatic self-assembly technology was built for the first time. The composite of ZnSe-CTAB introduced a favorable access for the electron transfer and gave superior electrocatalytic activity for the oxidation of CPs than ZnSe QDs and CTAB alone. Differential pulse voltammetry (DPV) was used for the quantitative determination of the CPs including 2-chlorophenol (2-CP), 2,4-dichlorophenol (2,4-DCP) and pentachlorophenol (PCP). Under the optimum conditions, the peak currents of the CPs were proportional to their concentrations in the range from 0.02 to 10.0 μM for 2-CP, 0.006 to 9.0 μM for 2,4-DCP, and 0.06 to 8.0 for PCP. The detection limits were 0.008 μM for 2-CP, 0.002 μM for 2,4-DCP, and 0.01 μM for PCP, respectively. The method was successfully applied for the determination of CPs in waste water with satisfactory recoveries. This ZnSe-CTAB electrode system provides operational access to design environment-friendly CPs sensors. Copyright © 2013 Elsevier B.V. All rights reserved.

  9. Pharmacokinetic detection of penicillin excreted in urine using a totally internally reflected resonance light scattering technique with cetyltrimethylammonium bromide. (United States)

    Huang, Cheng Zhi; Feng, Ping; Li, Yuan Fang; Tan, Ke Jun


    A quantitative analysis method for penicillins including ampicillin (AmP), benzyl penicillin (BP), oxacillin (OA) and amoxycillin (AmO) is proposed that makes use of the totally internally reflected resonance light scattering (TIR-RLS) signal from the penicillin at the H2O/CCl4 interface in the presence of cetyltrimethylammonium bromide (CTMAB), and enables the pharmacokinetics of penicillin taken orally and excreted through urine to be monitored. Penicillin is coadsorbed with CTMAB at the H2O/CCl4 interface in neutral solution, resulting in the formation of ion associates that display greatly enhanced TIR-RLS signals (maximum at 368-372 nm). This enhanced TIR-RLS intensity was found to be proportional to the penicillin concentration over the range 0.2 x 10(-6) to 2.2 x 10(-6) mol L(-1), with limits of determination (3sigma) of 5.0 x 10(-8) to 7.0 x 10(-8) mol L(-1). Pharmacokinetics studies performed using the present method show that the excretion of orally-taken ampicillin through urine has a half-time of 1.05 h and an excremental quantum over 8 h of 49.3%, respectively.

  10. Dynamics of cetyltrimethylammonium bromide mediated reaction of phenylsulfinylacetic acid with Cr(VI: Treatment of pseudo-phase models

    Directory of Open Access Journals (Sweden)

    Subramaniam Perumal


    The influence of cetyltrimethylammonium bromide, CTon the oxidative decarboxylation of phenylsulfinylacetic acid, PSAA and several meta- and para-substituted PSAAs by Cr(VI was investigated in 95 % H2O-5 % CH3CN medium. The rate profile displayed a peculiar trend with an initial rate increase at low [CTAB] followed by sharp rate inhibition at higher [CTAB]. The initial rate acceleration can be explained by strong binding of SO42- on the positively charged micellar surface. The specific partitioning of PSAA in micellar phase by hydrophobic interaction and the oxidizing species, HCrO3+ in aqueous phase by electrostatic repulsion accounted the rate retardation at higher [CTAB]. The Hammett plot with different substituted PSAAs showed an excellent correlation affording negative ρ value which supports the proposed mechanism involving a sulfonium cation intermediate formation. The obtained ρ value in CTmedium is found to be slightly lower than that in aqueous medium. The quantitative analysis of rate data for the inhibition shown by CTwas performed using Menger-Portnoy and Piszkiewicz pseudo-phase models. The binding constant for PSAA with micelle was evaluated from Piszkiewicz cooperative model.

  11. Synthesis of zeolitic materials from volcanic ash in presence and absence of cetyltrimethylammonium bromide

    Energy Technology Data Exchange (ETDEWEB)

    Sanhueza N, V. M.; Bennun T, L. D., E-mail: [Universidad de Concepcion, Facultad de Ciencias Quimicas, Edmundo Larenas 129, Region del Biobio (Chile)


    Zeolitic materials as Na-phillipsite, Na-K-phillipsite-like zeolites and the mixtures of zeolites (phillipsite+analcime and phillipsite+chabazite+analcime) were synthesized from volcanic ash, either in presence and absence of cetiltrimetilamonium bromide (CTAB). The ash sample used in the laboratory experiments contains 75.36% SiO{sub 2} and 14.11% Al{sub 2}O{sub 3}, abundances. The reaction time as well as the influence of CTAB were studied in the zeolitic materials crystallization. The experiments were carried out under hydrothermal conditions, autogenic pressure and temperature of 150 grades C, as well as reaction time from 8 to 116 h. Products from this hydrothermal treatment were identified by X-ray diffraction (XRD) and characterized by scanning electron microscopy-energy dispersive X-ray spectroscopy (Sem-EDS). Of the zeolitic materials obtained the Na-K-phillipsite-like zeolite was found to be the most effective for the retention of cations Pb{sup 2+}, Zn{sup 2+} and Ba{sup 2+}. (Author)

  12. A new chemiluminescence method for determination of dicyandiamide based on the N-bromosuccinimide–merbromin–cetyltrimethylammonium bromide system

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Hua; Tang, Yuhai, E-mail:; Zhang, Guangbin; Wang, Zhongcheng; Gao, Ruixia


    A novel and highly sensitive chemiluminescence (CL) method for the determination of dicyandiamide (DCD) has been developed based on the new CL system of N-bromosuccinimide–merbromin–cetyltrimethylammonium bromide in alkaline solution. Experiment conditions were optimized using central composite design-response surface methodology. Under the optimal conditions, the relative CL intensity was linear with the concentration of DCD ranging from 5.0×10{sup −8} g mL{sup −1} to 3.0×10{sup −6} g mL{sup −1}. The detection limit, at the signal-to-noise ratio of 3, was 3.0×10{sup −9} g mL{sup −1}. The relative standard deviation was 1.9% for 11 repeated determinations of 1.0×10{sup −6} g mL{sup −1} DCD. The proposed method was successfully applied to the analyses of DCD in tap water and milk products. And the recoveries were in the range of 87.0–102.3% with relative standard deviation values of 1.2–2.9%. Moreover, the minimum sampling rate was 120 samples h{sup −1}. The possible mechanism of the CL reaction was also discussed. - Highlights: • A novel NBS–merbromin–CTAB–dicyandiamide CL system was proposed. • A CL method for detection of dicyandiamide was developed. • Chemical parameters were optimized using central composite design. • The proposed method is simple, rapid, sensitive, and low-cost.

  13. Effect of alkyl chain asymmetry on catanionic mixtures of hydrogenated and fluorinated surfactants. (United States)

    Blanco, Elena; Rodriguez-Abreu, Carlos; Schulz, Pablo; Ruso, Juan M


    In this work we studied and compared the physicochemical properties of the catanionic mixtures cetyltrimethyl-ammonium bromide-sodium dodecanoate, cetyltrimethyl-ammonium bromide-sodium perfluorodacanoate, octyltrimethylammonium bromide-sodium perfluorodacanoate and cetyltrimethyl-ammonium bromide-sodium octanoate by a combination of rheological, transmission electron microscopy (TEM) and polarized optical microscopy measurements. The binary mixtures of the surfactants have been analyzed at different mixed ratios and total concentration of the mixture. Mixtures containing a perfluorinated surfactant are able to form lamellar liquid crystals and stable spontaneous vesicles. Meanwhile, system containing just hydrogenated surfactants form hexagonal phases or they are arranged in elongated aggregates.

  14. Novel Approach to Characterization of Rare Earth Complexation with 1, 5-Bis(2-Hydroxy-5-Chlorphenyl)-3-Cyanoformazan in Presence of Cetyltrimethylammonium Bromide

    Institute of Scientific and Technical Information of China (English)

    郑立新; 胡张军; 郜洪文


    The ternary interaction of 1, 5-bis(2-hydroxy-5-chlorphenyl)-3-cyanoformazan (HCPCF) with cetyltrimethylammonium bromide (CTAB) and rare earths (RE: Yb, Dy, Er and Eu) was investigated at pH 9.84 by the microsurface adsorption - spectral correction technique (MSASC). The aggregation of HCPCF on CTAB obeys the Langmuir isothermal adsorption and the interaction of RE with the HCPCF-CTAB aggregate was first found to accord with the monolayer binding. The effects of temperature and ionic strength of solution on the aggregations were made. The binary aggregate and the ternary complex were characterized.

  15. The Krafft temperature of surfactant solutions

    Directory of Open Access Journals (Sweden)

    Manojlović Jelena Ž.


    Full Text Available Our main motivation to revisit the solution properties of cetyltrimethylammonium bromide is related to the clear requirement for better control of the adsorption parameters to form uniform self-assembled monolayers on muscovite mica substrates. To readily monitor the temporal evolution of structural details in cetyltrimethylammonium bromide solutions, we realized a rather simple conductivity experiment. Conductivity measurements were carried out as a function of temperature, to look closer into the Krafft temperature behavior of this surfactant. We measured the electrical conductivity of different concentrations of aqueous cetyltrimethylammonium bromide solutions, below and above the critical micells concentration.

  16. Synthesis of silver nano-materials from Grevillea robusta A Cunn (Silver-oak tree) leaves extract and shape directing role of cetyltrimethylammonium bromide

    Energy Technology Data Exchange (ETDEWEB)

    Ahmad, Rabia; Faisal, Qamer; Hussain, Sajjad [Department of Chemistry, Jamia Millia Islamia (Central University), New Delhi-110025 (India)


    Grevillea robusta (Silver-oak tree) tree is a medicinal tree. Conventional UV-visible spectrophotometric and transmission electron microscopic technique were used to determine the morphology of silver nanoplates (AgNP) using Grevillea robusta (Silver-oak tree) aqueous leaves extract for the first time. The visible spectra showed the presence of three well defined surface plasmon absorption (SPR) bands at 500, 550 and 675 nm which was attributed to the anisotropic growth of Ag-nanoplates. Transmission electron microscopic (TEM) analysis of AgNP showed formation of truncated triangular, polyhedral with some irregular shapes nanoplates in the size range 8-20 nm. Cetyltrimethylammonium bromide (CTAB) has no significant effect on the shape of the spectra, position of SPR bands, size and size distribution of AgNP.

  17. Study on the resonance light scattering spectrum of berberine-cetyltrimethylammonium bromide system and the determination of nucleic acids at nanogram levels (United States)

    Liu, Rutao; Yang, Jinghe; Wu, Xia; Sun, Changxia


    The interaction of berberine with nucleic acid in the presence of cetyltrimethylammonium bromide (CTMAB) in aqueous solution has been studied by spectrophotometry and resonance light scattering (RLS) spectroscopy. At pH 7.30, the RLS signals of berberine were greatly enhanced by nucleic acid in the region of 300-600 nm characterized by four peaks at 324.0, 386.5, 416.5 and 465.0 nm. The binding properties were examined by using a Scatchard plot based on the measurement of enhanced RLS data at 416.5 nm. Under optimum conditions, the increase of RLS intensity of this system at 416.5 nm is proportional to the concentration of nucleic acid. The linear range is 7.5×10 -9-7.5×10 -5 g ml -1 for calf thymus DNA, 7.5×10 -9-2.5×10 -5 g ml -1 for herring sperm DNA, and 5.0×10 -9-2.5×10 -5 g ml -1 for yeast RNA. The detection limits (S/N=3) are 2.1 ng ml -1 for calf thymus DNA, 6.5 ng ml -1 for herring sperm DNA and 3.5 ng ml -1 for yeast RNA, respectively. Three synthetic samples were analyzed satisfactorily.

  18. Self-aggregation of synthesized novel bolaforms and their mixtures with sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB) in aqueous medium. (United States)

    Maiti, Kajari; Mitra, Debolina; Mitra, Rajendra N; Panda, Amiya K; Das, Prasanta K; Rakshit, Animesh K; Moulik, Satya P


    Bolaforms B(1), B(2), and B(3) of the formulas, Br(-)Me(3)N(+)(CH(2))(10)N(+)Me(3)Br(-), Br(-)Me(3)N(+)(CH(2))(10)OH, and Br(-)Me(3)N(+)(CH(2))(10)COO(-)Na(+), respectively, were synthesized, and their properties in the bulk as well as at the air/aqueous NaBr (10 mM) solution interface have been studied. Their interactions with sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB) also have been investigated. Tensiometry, conductometry, spectrophotometry, and microcalorimetry techniques were used for characterization and estimation. Both pure bolaforms and their mixtures with SDS and CTAB have been found to self-aggregate, forming micelles in solution. The mixed systems of bolaform and SDS have been observed to form both micelles and vesicles. Their mutual interactions were synergistic, which at the interface was more spontaneous than in the bulk. The interfacial and bulk compositions of the mixed binary systems (bolaform and SDS or CTAB) with their associated interaction parameters have been estimated from the Rosen interaction model and the regular solution theory of Rubingh, respectively. The formed vesicles have been found to entrap the water-soluble dye, bromophenol blue, and the dye solubilized vesicles of B(1)-SDS and B(2)-SDS completely eluted out of the sephadex column proving their formation. A rough estimation of the size and polydispersity index of the formed micelles and vesicles has been made from DLS measurements.

  19. Spectral studies on the interaction of Acid chrome blue K with nucleic acids in the presence of cetyltrimethylammonium bromide and the confirmation of combined points (United States)

    Cai, Changqun; Chen, Xiaoming


    The interaction of Acid chrome blue K (ACBK) with nucleic acids in weak basic medium was studied in the presence of cetyltrimethylammonium bromide (CTMAB) based on the measurements of resonance light scattering (RLS), UV-vis, NMR spectra, etc. In hexamethylene tetramine (HMTA) buffer (pH 7.45), ACBK and nucleic acids react with CTMAB to form a ternary complex, which results in strong enhanced RLS signals characterized by four peaks at 285, 335, 405.5 and 548 nm. Mechanistic studies show that the enhanced RLS stems from the aggregation of ACBK on nucleic acids through the bridged and synergistic effect of CTMAB. With the enhanced RLS signals at the best wavelength at 335 nm, the enhanced RLS intensity is proportional to the concentration of nucleic acids in a wide range. The lowest limit of determination was 7.52 ng ml -1, three synthetic samples were analyzed satisfactorily. And the combined points of the anionic dye ACBK with nucleic acids-CTMAB have been tentatively confirmed through the measurement of 1H NMR spectra.

  20. Preconcentration of trace amounts of lead in water samples with cetyltrimethylammonium bromide coated magnetite nanoparticles and its determination by flame atomic absorption spectrometry

    Directory of Open Access Journals (Sweden)

    Mohammad Faraji


    Full Text Available A sensitive and simple magnetic solid phase extraction procedure was presented for the preconcentration of lead ions in environmental water samples. In the present study, lead ions form complexes with 1-(2-pyridilazo-2-naphthol reagent (PAN in basic medium, and then are quantitatively extracted to the surface of cetyltrimethylammonium bromide (CTAB-coated magnetite nanoparticles (Fe3O4 NPs. After magnetic separation of adsorbent, the adsorbent was eluted with 0.5% (v/v HCl in methanol prior to its analysis by flame atomic absorption spectrometry (FAAS. The pH of sample, concentrations of PAN, amounts of CTAB and Fe3O4 NPs, sample volume and desorption conditions were optimized. Under optimum conditions, the calibration curve was linear in the range of 0.05–100 ng mL−1 with R2 = 0.9996. Detection and quantification limits of the proposed method were 0.005 and 0.05 ng mL−1, respectively. Enhancement factor of 1050 was achieved using this method to extract 1000 mL of different environmental water samples. Compared with conventional solid phase extraction methods, the advantages of this method still include easy preparation of sorbents, short times of sample pre-treatment, high extraction yield, and high breakthrough volume. It shows great analytical potential in preconcentration of lead from large volume water samples.

  1. The effect of cetyltrimethylammonium bromide on size and morphology of ZnO and CuO

    Directory of Open Access Journals (Sweden)

    Anantha N. Subba Rao


    Full Text Available The nanoparticles (NP ZnO and CuO were synthesized by electrochemical-thermal method. The influence ofcetyltrimethylammonium bromide (CTAB on size and morphology of NP was evaluated. They were characterized by powder X-ray diffraction spectroscopy (XRD, scanning electron microscopy (SEM, UV-Visible absorption spectroscopy. The average crystallite size and the average grain size of NP decreased with CTAB concentration. The CTAB significantly affected the morphology of CuO and ZnO NP. The regular spindle shape of CuO transformed into irregular spherical shape and the homogeneity in the morphology of spherical ZnO NP was lost with increase in CTAB concentration. The effect of morphology and size of ZnO on its photocatalytic activity was evaluated by subjecting methylene blue (MB dye to photocatalytic degradation under the irradiation of UV light. The color removal of MB dye during electrolysis was monitored by UV-Visible spectroscopy. The highest photocatalytic activity was noticed for ZnO 10 mM CTAB.


    NARCIS (Netherlands)



    The induction of aggregate formation of cationic polysoaps ((CL)-Copol C1-12), cetyltrimethylammonium bromide (CTAB), n-dodecyltrimethylammonium bromide (DTAB), and n-dodecylmethyldiallylammonium bromide (DMDAAB) by low concentrations of Methyl Orange (10(-5)-10(-4) M) and anionic surfactants (conce


    Institute of Scientific and Technical Information of China (English)

    Jun Tao; Hai-yang Yang; Xiang Hao; Yong-jun Xie; Hua-yu Li


    The sol-gel transition of methylcellulose (MC) solutions in the presence of ortho-methoxycinnamic acid (OMCA) or cetyltrimethylammonium bromide (CTAB) and in the coexistence of OMCA and CTAB was determined by the rheological measurement.It has been found that the sol-gel transition temperature of MC solutions increases linearly with the concentration of either OMCA or CTAB in solution,respectively.However,in the coexistence of OMCA and CTAB,the sol-gel transition temperature of MC solutions remains invariable,independent of the concentration of CTAB in solution.The experimental results show that OMCA has priority to adsorb on the methyl group of MC chains to form polymer-bound aggregates.In particular,these aggregates inhibit the hydrophobic interaction between CTAB and the methyl group of MC chains completely.Taking into account the fact that OMCA is almost insoluble in MC-free solutions but dissolves very well in aqueous MC solutions,we propose the formation of the core-shell architecture prompted by OMCA and the methyl group of MC chains,with the methyl group of MC chains serving as the core and the self-assembly of OMCA molecules serving as the shell.Obviously,the formation of the core-shell structure increases the solubility of OMCA,improves the stability of methyl groups of MC chains at high temperatures and inhibits the hydrophobic interaction between CTAB and the methyl group of MC chains in solution.The abnormal behavior relating to the sol-gel transition of MC solutions in the presence of OMCA or in the coexistence of OMCA and CTAB is therefore explained.Upon UV irradiation,the sol-gel transition temperature of MC solutions in the presence of OMCA,or in the coexistence of OMCA and CTAB,decreases notably.However,the dependence of the sol-gel transition temperature of MC solutions as a function of OMCA concentration,or CTAB concentration in the presence of OMCA,does not change after UV irradiation.

  4. The extraction of gold nanoparticles from oat and wheat biomasses using sodium citrate and cetyltrimethylammonium bromide, studied by x-ray absorption spectroscopy, high-resolution transmission electron microscopy, and UV-visible spectroscopy (United States)

    Armendariz, Veronica; Parsons, Jason G.; Lopez, Martha L.; Peralta-Videa, Jose R.; Jose-Yacaman, Miguel; Gardea-Torresdey, Jorge L.


    Gold (Au) nanoparticles can be produced through the interaction of Au(III) ions with oat and wheat biomasses. This paper describes a procedure to recover gold nanoparticles from oat and wheat biomasses using cetyltrimethylammonium bromide or sodium citrate. Extracts were analyzed using UV-visible spectroscopy, high-resolution transmission electron microscopy (HRTEM), and x-ray absorption spectroscopy. The HRTEM data demonstrated that smaller nanoparticles are extracted first, followed by larger nanoparticles. In the fourth extraction, coating of chelating agents is visible on the extracted nanoparticles.

  5. The extraction of gold nanoparticles from oat and wheat biomasses using sodium citrate and cetyltrimethylammonium bromide, studied by x-ray absorption spectroscopy, high-resolution transmission electron microscopy, and UV-visible spectroscopy. (United States)

    Armendariz, Veronica; Parsons, Jason G; Lopez, Martha L; Peralta-Videa, Jose R; Jose-Yacaman, Miguel; Gardea-Torresdey, Jorge L


    Gold (Au) nanoparticles can be produced through the interaction of Au(III) ions with oat and wheat biomasses. This paper describes a procedure to recover gold nanoparticles from oat and wheat biomasses using cetyltrimethylammonium bromide or sodium citrate. Extracts were analyzed using UV-visible spectroscopy, high-resolution transmission electron microscopy (HRTEM), and x-ray absorption spectroscopy. The HRTEM data demonstrated that smaller nanoparticles are extracted first, followed by larger nanoparticles. In the fourth extraction, coating of chelating agents is visible on the extracted nanoparticles.

  6. 十六烷基三甲基溴化铵对硫酸盐电镀镍的影响%Influence of Cetyltrimethylammonium Bromide on Sulfate Nickel Plating

    Institute of Scientific and Technical Information of China (English)

    李延伟; 黄晓曦; 尚雄; 朱彦熹; 宋晓波


    The influence of cationic surfactant cetyltrimethylammonium bromide (CTAB) was investigated on the hardness, internal stress, surface morphology and porosity of the nickel deposit from sulfate electrolyte as well as the cathodic current efficiency, throwing power, cathodic polarization, electrochemical reaction impedance of the electrolyte. The microstructure of the nickel deposit was characterized by X-ray diffraction (XRD) test. The results show that addition of CTAB can notably fine the grain size of nickel deposit and improve the hardness and internal stress of nickel deposit. With the increase of CTAB concentration, the porosity of nickel deposit is reduced but the cathodic current efficiency and throwing power of the plating solution almost remain. Adding CTAB to the electrolyte can slightly decrease the cathodic polarization and electrochemical reaction impedance of nickel deposition. X-ray diffraction analysis suggests that (200) plane is the crystallographic preferential orientation of the nickel deposit and the relative texture coefficient increases with the increase of CTAB concentration.%研究了阳离子型表面活性剂十六烷基三甲基溴化铵(CTAB)对硫酸盐镀镍层的硬度、内应力、表面形貌、孔隙率及电解液的电流效率、分散能力、阴极极化、电化学反应阻抗的影响,并采用X射线衍射仪(XRD)表征了镀镍层的微观结构.结果表明:CTAB的加入能显著细化镀镍层的晶粒尺寸,提高镀镍层的硬度和拉应力;随着CTAB的质量浓度的增加,镀镍层的孔隙率减小,而电解液的电流效率、分散能力变化不大;在电解液中添加CTAB,使阴极极化作用略有减弱,且镍沉积阻抗减小;镀镍层呈现(200)晶面择优取向,且随着CTAB的质量浓度的增加,镀层(200)晶面的相对取向密度增大.

  7. Interaction of nonionic surfactant AEO9 with ionic surfactants*



    The interaction in two mixtures of a nonionic surfactant AEO9 (C12H25O(CH2CH2O)9H) and different ionic surfactants was investigated. The two mixtures were AEO9/sodium dodecyl sulfate (SDS) and AEO9/cetyltrimethylammonium bromide (CTAB) at molar fraction of AEO9, α AEO9=0.5. The surface properties of the surfactants, critical micelle concentration (CMC), effectiveness of surface tension reduction (γ CMC), maximum surface excess concentration (Γ max) and minimum area per...

  8. Interaction of Natural Dye (Allium cepa) with Ionic Surfactants



    Allium cepa is a natural dye that has been extracted from onion skin with the help of soxhlet apparatus. The pigment in the dye pelargonidin was found to be 2.25%. The interaction of the dye with ionic surfactants, namely, cationic surfactant (cetyltrimethylammonium bromide) and anionic (sodium lauryl sulphate) has been studied by spectrophotometrically, conductivity, and surface tension measurements. The thermodynamic and surface parameters have been evaluated for the interaction process. Th...

  9. Adsorption of alkyltrimethylammonium bromides at water/alkane interfaces: competitive adsorption of alkanes and surfactants. (United States)

    Fainerman, V B; Mucic, N; Pradines, V; Aksenenko, E V; Miller, R


    The adsorption of members of the homologous series of alkyl trimethylammonium bromides (C(n)TAB) is studied at water/alkane interfaces by drop profile analysis tensiometry. The results are discussed in terms of a competitive adsorption process of alkane and surfactant molecules. A thermodynamic model, derived originally for the adsorption of surfactant mixtures, is adapted such that it describes a competitive adsorption of the surfactant molecules from the aqueous phase and alkane molecules from the oil phase. This new model involves the interspecies attraction coefficient, which mutually increases the adsorption activities of the alkane and C(n)TAB. The effects of the alkyl chain length n of C(n)TABs and the influence of the number of C atoms in the alkane chain are discussed, and the physical quantities are compared to those determined at the aqueous solution/air interface. The new theoretical model for aqueous solution/oil interfaces is also compared to a theory that does not consider the adsorption of alkane. The proposed new model demonstrates good agreement with the experimental data.

  10. Effect of Cationic Surfactant on the Gelation of HPAM by Cr(III)

    Institute of Scientific and Technical Information of China (English)


    The effect of cationic surfactant cetyltrimethylammonium bromide (CTAB) on the gelation of partially hydrolyzed polyacrylamide (HPAM) by Cr (III) was investigated by using rheological measurements. The results indicated that the CTAB concentration has a pronounced effect on the viscoelastic properties of the gelling system.

  11. Metal organic framework synthesis in the presence of surfactants: towards hierarchical MOFs?

    NARCIS (Netherlands)

    Seoane, B.; Dikhtiarenko, A.; Mayoral, A.; Tellez, C.; Coronas,J.; Kapteijn, F.; Gascon, J.


    The effect of synthesis pH and H2O/EtOH molar ratio on the textural properties of different aluminium trimesate metal organic frameworks (MOFs) prepared in the presence of the well-known cationic surfactant cetyltrimethylammonium bromide (CTAB) at 120 °C was studied with the purpose of obtaining a

  12. Interaction of nonionic surfactant AEO9 with ionic surfactants

    Institute of Scientific and Technical Information of China (English)

    ZHANG Zhi-guo; YIN Hong


    The interaction in two mixtures of a nonionic surfactant AEO9 (C12H25O(CH2CH2O)9H) and different ionic surfactants was investigated. The two mixtures were AEO9/sodium dodecyl sulfate (SDS) and AEO9/cetyltrimethylammonium bromide (CTAB) at molar fraction of AEO9, αAEO9 =0.5. The surface properties of the surfactants, critical micelle concentration (CMC),effectiveness of surface tension reduction (γCMC), maximum surface excess concentration (Гmax) and minimum area per molecule at the air/solution interface (Amin) were determined for both individual surfactants and their mixtures. The significant deviations from ideal behavior (attractive interactions) of the nonionic/ionic surfactant mixtures were determined. Mixtures of both AEO9/SDS and AEO9/CTAB exhibited synergism in surface tension reduction efficiency and mixed micelle formation, but neither exhibited synergism in surface tension reduction effectiveness.

  13. Study of the formation and solution properties of worm-like micelles formed using both N-hexadecyl-N-methylpiperidinium bromide-based cationic surfactant and anionic surfactant.

    Directory of Open Access Journals (Sweden)

    Zhihu Yan

    Full Text Available The viscoelastic properties of worm-like micelles formed by mixing the cationic surfactant N-hexadecyl-N-methylpiperidinium bromide (C16MDB with the anionic surfactant sodium laurate (SL in aqueous solutions were investigated using rheological measurements. The effects of sodium laurate and temperature on the worm-like micelles and the mechanism of the observed shear thinning phenomenon and pseudoplastic behavior were systematically investigated. Additionally, cryogenic transmission electron microscopy images further ascertained existence of entangled worm-like micelles.

  14. Alkanediyl-α, ω-bis (dimethyl cetylammonium bromide gemini surfactants as novel corrosion inhibitors for mild steel in formic acid

    Directory of Open Access Journals (Sweden)

    Mohammad Mobin


    Full Text Available Gemini surfactants, butanediyl 1,4-bis(dimethyl cetylammonium bromide, pentanediyl 1,5 - bis (dimethyl cetylammonium bromide and hexanediyl 1,6 - bis (dimethyl cetylammonium bromide from Alkanediyl-α, ω-bis (dimethyl cetylammonium bromide series were synthesized in laboratory and were characterized by using Nuclear Magnetic Resonance (NMR spectroscopy. The surfactants were tested as corrosion inhibitors for mild steel in 20% formic acid. The influence of surfactants on mild steel corrosion inhibition was investigated by measuring the corrosion rate of mild steel in their absence and presence by weight loss measurements, solvent analysis of iron ions into the test solution and potentiodynamic polarization measurements. The surface morphology of the corroded steel samples in presence and absence of surfactants was evaluated by using Scanning Electron Microscopy (SEM. The synthesized gemini surfactants performed as excellent corrosion inhibitor, the inhibition efficiency (IE being in the range of 76.66-97.41%. The IE of surfactants is slightly affected by the spacer length. The IE increased with increase in surfactant concentration and temperature. The adsorption of gemini surfactants on the steel surface was found to obey Langmuir adsorption isotherm. The results of the potentiodynamic polarization studies are consistent with the results of weight loss studies.

  15. Hexadecyltrimethylammonium bromide micellization in glycine, diglycine, and triglycine aqueous solutions as a function of surfactant concentration and temperatures (United States)

    Ali, Anwar; Malik, Nisar Ahmad; Uzair, Sahar; Ali, Maroof; Ahmad, Mohammad Faiz


    Micellization behavior of hexadecyltrimethylammonium bromide (HTAB) was investigated conductometrically in aqueous solutions containing 0.02 mol kg-1glycine (Gly), diglycine (Gly-Gly), and triglycine (Gly-Gly-Gly) as a function of surfactant concentration at different temperatures. The critical micelle concentration (CMC) of HTAB exhibits a decreasing trend as the number of carbon atoms increases from Gly to Gly-Gly-Gly, favoring the micelle formation. The values of CMC and the degree of counterion dissociation of the micelles were utilized to evaluate the standard free energy for transferring the surfactant hydrophobic chain out of the solvent to the interior of the micelle, Δ G {HP/○}, free energy associated with the surface contributions, Δ G {S/○}, standard free energy, Δ G {m/○}, enthalpy, Δ H {m/○}, and entropy, Δ S {m/○} of micellization were also calculated. The results show that the micellization of HTAB in aqueous solutions as well as in aqueous Gly/Gly-Gly/Gly-Gly-Gly solutions is primarily governed by the entropy gain due to the transfer of the hydrophobic groups of the surfactant from the solvent to the interior part of the micelle. The CMC obtained by fluorometric method is in close agreement with those obtained conductometrically. Furthermore, decrease in the I 1/ I 3 ratio of pyrene fluorescence intensity suggests the solubilization of the additives by the surfactant micelles and that this solubilization increases as the hydrophobicity increases from Gly to Gly-Gly-Gly.

  16. Removal of 226Ra and 228Ra from TENORM sludge waste using surfactants solutions. (United States)

    Attallah, M F; Hamed, Mostafa M; El Afifi, E M; Aly, H F


    The feasibility of using surfactants as extracting agent for the removal of radium species from TENORM sludge produced from petroleum industry is evaluated. In this investigation cationic and nonionic surfactants were used as extracting agents for the removal of radium radionuclides from the sludge waste. Two surfactants namely cetyltrimethylammonium bromide (CTAB) and Triton X-100 (TX100) were investigated as the extracting agents. Different parameters affecting the removal of both (226)Ra and (228)Ra by the two surfactants as well as their admixture were studied by the batch technique. These parameters include effect of shaking time, surfactants concentration and temperature as well as the effect of surfactants admixture. It was found that, higher solution temperature improves the removal efficiency of radium species. Combined extraction of nonionic and cationic surfactants produces synergistic effect in removal both (226)Ra and (228)Ra, where the removals reached 84% and 80% for (226)Ra and (228)Ra, respectively, were obtained using surfactants admixture.

  17. Tuning the crystal morphology and size of zeolitic imidazolate framework-8 in aqueous solution by surfactants

    KAUST Repository

    Pan, Yichang


    Herein we report a facile synthesis method using surfactant cetyltrimethylammonium bromide (CTAB) as a capping agent for controlling the crystal size and morphology of zeolitic imidazolate framework-8 (ZIF-8) crystals in aqueous systems. The particle sizes can be precisely adjusted from ca. 100 nm to 4 μm, and the morphology can be changed from truncated cubic to rhombic dodecahedron. This journal is © The Royal Society of Chemistry.

  18. Aqueous behaviour of cationic surfactants containing a cleavable group. (United States)

    Samakande, Austin; Chaghi, Radhouane; Derrien, Gaelle; Charnay, Clarence; Hartmann, Patrice C


    The aggregation behaviour of two novel cationic RAFT agents (transfer surfactants); N,N-dimethyl-N-(4-(((phenylcarbonothioyl)thio)methyl)benzyl)ethanammonium bromide (PCDBAB) and N-(4-((((dodecylthio)-carbonothioyl)thio)methyl)benzyl)-N,N-dimethylethanammonium bromide (DCTBAB) in diluted solutions have been investigated by surface tension, conductimetry and microcalorimetry measurements. The thermodynamic parameters i.e. the critical micelle concentration (cmc), the degree of micelle ionization (alpha), the head group surface area (a 0), Delta H mic, Delta G mic and T Delta S mic are reported at 303 K. The thermodynamic parameters have been compared to those of the conventional surfactant cetyltrimethylammonium bromide (CTAB) in order to specify structural relationships. The obtained results have been discussed considering the hydrophobic behaviour of the S-C=S- linkage and the specific interactions that arise from the introduction of the benzene ring into the hydrophobic part.

  19. Surfactant-enhanced cellulose nanocrystal Pickering emulsions. (United States)

    Hu, Zhen; Ballinger, Sarah; Pelton, Robert; Cranston, Emily D


    The effect of surfactants on the properties of Pickering emulsions stabilized by cellulose nanocrystals (CNCs) was investigated. Electrophoretic mobility, interfacial tension, confocal microscopy and three-phase contact angle measurements were used to elucidate the interactions between anionic CNCs and cationic alkyl ammonium surfactants didecyldimethylammonium bromide (DMAB) and cetyltrimethylammonium bromide (CTAB). Both surfactants were found to adsorb onto CNCs with concentration-dependent morphology. At low concentrations, individual surfactant molecules adsorbed with alkyl tails pointing outward leading to hydrophobic CNCs. At higher concentrations, above the surfactant's apparent critical micelle concentration, surfactant aggregate morphologies on CNCs were inferred and the hydrophobicity of CNCs decreased. DMAB, which has two alkyl tails, rendered the CNCs more hydrophobic than CTAB which has only a single alkyl tail, at all surfactant concentrations. The change in CNC wettability from surfactant adsorption was directly linked to emulsion properties; adding surfactant increased the emulsion stability, decreased the droplet size, and controlled the internal phase of CNC Pickering emulsions. More specifically, a double transitional phase inversion, from oil-in-water to water-in-oil and back to oil-in-water, was observed for emulsions with CNCs and increasing amounts of DMAB (the more hydrophobic surfactant). With CNCs and CTAB, no phase inversion was induced. This work represents the first report of CNC Pickering emulsions with surfactants as well as the first CNC Pickering emulsions that can be phase inverted. The ability to surface modify CNCs in situ and tailor emulsions by adding surfactants may extend the potential of CNCs to new liquid formulations and extruded/spray-dried materials.

  20. Effect of curcumin on the binding of cationic, anionic and nonionic surfactants with myoglobin (United States)

    Mondal, Satyajit; Ghosh, Soumen


    Interaction of a globular protein, myoglobin and different surfactants has been studied in the absence and presence of curcumin in phosphate buffer at pH = 7.4 by UV-VIS spectrophotometry, fluorimetry and fluorescence polarization anisotropy methods. Results show that heme environment of myoglobin is changed by cationic cetyltrimethylammonium bromide (CTAB) and sodium N-dodecanoyl sarcosinate (SDDS). In the presence of curcumin, CTAB cannot change the heme; but SDDS can make change. Nonionic surfactant N-decanoyl-N-methylglucamine (Mega 10) cannot change the heme environment. Protein is unfolded by the surfactant. Curcumin can prevent the unfolding of protein in the low concentration region of ionic surfactants such as CTAB and SDDS. In nonionic surfactant media, curcumin accelerates the denaturation process. Due to myoglobin-curcumin complex formation, rotational motion of curcumin decreases in surfactant media and so anisotropy increases.

  1. Reversibly enhanced aqueous solubilization of volatile organic compounds using a redox-reversible surfactant

    Institute of Scientific and Technical Information of China (English)

    Yingjie Li; Senlin Tian; Hong Mo; Ping Ning


    Surfactant-enhanced remediation (SER) is an effective method for the removal of volatile organic compounds (VOCs) from contaminated soils and groundwater.To reuse the surfactant the VOCs must be separated from the surfactant solutions.The water solubility of VOCs can be enhanced using reversible surfactants with a redox-acive group,(ferrocenylmethyl)dodecyldimethylammonium bromide (Fc12) and (ferrocenylmethyl)tetradecanedimethylammonium bromide (Fc14),above and below their critical micelle concentrations (CMC) under reducing (I+) and oxidative (I2+) conditions.The CMC values of Fc12 and Fc14 in I+ are 0.94 and 0.56 mmol/L and the solubilization of toluene by Fc12 and Fc14 in I+ for toluene is higher than the solubilization achieved with sodium dodecyl sulfate,cetyltrimethylammonium bromide and Trition X-114.The solubilization capacity of the ferrocenyl surfactants for each tested VOCs ranked as follows:ethylbenzene > toluene > benzene.The solubilities of VOCs by reversible surfactant in I+ were 30% higher than those in 12+ at comparable surfactant concentrations.The effects of Fc14 concentrations on VOCs removal efficiency were as follows:benzene > toluene > ethylbenzene.However,an improved removal efficiency was achieved at low ferrocenyl surfactant concentrations.Furthermore,the reversible surfactant could be recycled through chemical approaches to remove organic pollutants,which could significantly reduce the operating costs of SER technology.

  2. FTIR Metabolomic Fingerprint Reveals Different Modes of Action Exerted by Structural Variants of N-Alkyltropinium Bromide Surfactants on Escherichia coli and Listeria innocua Cells (United States)

    Corte, Laura; Tiecco, Matteo; Roscini, Luca; De Vincenzi, Sergio; Colabella, Claudia; Germani, Raimondo; Tascini, Carlo; Cardinali, Gianluigi


    Surfactants are extremely important agents to clean and sanitize various environments. Their biocidal activity is a key factor determined by the interactions between amphiphile structure and the target microbial cells. The object of this study was to analyze the interactions between four structural variants of N-alkyltropinium bromide surfactants with the Gram negative Escherichia coli and the Gram positive Listeria innocua bacteria. Microbiological and conductometric methods with a previously described FTIR bioassay were used to assess the metabolomic damage exerted by these compounds. All surfactants tested showed more biocidal activity in L. innocua than in E. coli. N-tetradecyltropinium bromide was the most effective compound against both species, while all the other variants had a reduced efficacy as biocides, mainly against E. coli cells. In general, the most prominent metabolomic response was observed for the constituents of the cell envelope in the fatty acids (W1) and amides (W2) regions and at the wavenumbers referred to peptidoglycan (W2 and W3 regions). This response was particularly strong and negative in L. innocua, when cells were challenged by N-tetradecyltropinium bromide, and by the variant with a smaller head and a 12C tail (N-dodecylquinuclidinium bromide). Tail length was critical for microbial inhibition especially when acting against E. coli, maybe due the complex nature of Gram negative cell envelope. Statistical analysis allowed us to correlate the induced mortality with the metabolomic cell response, highlighting two different modes of action. In general, gaining insights in the interactions between fine structural properties of surfactants and the microbial diversity can allow tailoring these compounds for the various operative conditions. PMID:25588017

  3. Experimental study on thermophoresis of colloids in aqueous surfactant solutions (United States)

    Dong, Ruo-Yu; Zhou, Yi; Yang, Chun; Cao, Bing-Yang


    Thermophoresis refers to the motion of particles under a temperature gradient and it is one of the particle manipulation techniques. Regarding the thermophoresis of particles in liquid media, however, many open questions still remain, especially the role of the interfacial effect. This work reports on a systematic experimental investigation of surfactant effects, especially the induced interfacial effect, on the thermophoresis of colloids in aqueous solutions via a microfluidic approach. Two kinds of commonly used surfactants, sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB), are selected and the results show that from relatively large concentrations, the two surfactants can greatly enhance the thermophilic mobilities. Specifically, it is found that the colloid-water interfaces modified with more polar end groups can potentially lead to a stronger thermophilic tendency. Due to the complex effects of surfactants, further theoretical model development is needed to quantitatively describe the dependence of thermophoresis on the interface characteristics.

  4. Synthesis of high quality MCM-48 with binary cationic-nonionic surfactants. (United States)

    Zhao, Wei; Li, Quanzhi; Wang, Lina; Chu, Jinglong; Qu, Jinkui; Li, Shaohua; Qi, Tao


    Highly ordered MCM-48 was synthesized in the hydrothermal system of a mixture of cationic cetyltrimethylammonium bromide (CTAB) and nonionic poly(ethylene glycol) monooctylphenyl ether (Tx-100) using water glass as the silicon source. The effect of various factors, such as the amount of surfactant, CTAB/Tx-100, Si source, crystallization temperature, and crystallization time, on the synthesis were discussed in detail. The local effective surfactant packing parameter theory and the charge balance theory were used to explain the reason that various factors can affect the product structure reasonably. Especially, the role of Tx-100 was expounded. The optimum synthesis conditions for MCM-48 were obtained.

  5. Investigation of the surfactant type and concentration effect on the retention factors of glutathione and its analogues by micellar electrokinetic chromatography. (United States)

    Kazarjan, Jana; Mahlapuu, Riina; Hansen, Mats; Soomets, Ursel; Kaljurand, Mihkel; Vaher, Merike


    In the present study, a micellar electrokinetic chromatographic method was used to determine the retention factors of hydrophilic monomeric and homodimeric forms of glutathione analogues. Ionic-liquid-based surfactant, 1-tetradecyl-3-methylimidazolium chloride, as well as cetyltrimethylammonium bromide and phosphate buffer (pH 7.4) were employed in the experiments. Since the studied peptides possess a negative charge under physiological conditions, it is expected that the peptides interact with the oppositely charged 1-tetradecyl-3-methylimidazolium chloride and cetyltrimethylammonium bromide micelles via hydrophobically assisted electrostatic forces. The dependence of the retention factor on the micellar concentration of 1-tetradecyl-3-methylimidazolium chloride and cetyltrimethylammonium bromide is nonlinear and the obtained curves converge to a limiting value. The retention factor values of GSH analogues were in the range of 0.36-2.22 for glutathione analogues and -1.21 to 0.37 for glutathione when 1-tetradecyl-3-methylimidazolium chloride was used. When cetyltrimethylammonium bromide was employed, the retention factor values were in the range of 0.27-2.17 for glutathione analogues and -1.22 to 0.06 for glutathione. If sodium dodecyl sulfate was used, the retention factor values of glutathione analogues with carnosine moiety were in the range of -1.54 to 0.38.

  6. Interactions of short chain phenylalkanoic acids within ionic surfactant micelles in aqueous media

    Directory of Open Access Journals (Sweden)

    Naeem Kashif


    Full Text Available % SDS KR nema Solubilization and interactions of phenylalkanoic acids induced by cationic surfactant, cetyltrimethylammonium bromide (CTAB and an anionic surfactant, sodium dodecyl sulfate (SDS was investigated spectrophotometrically at 25.0°C. The UV spectra of the additives (acids were measured with and without surfactant above and below critical micelle concentration (cmc of the surfactant. The presence of alkyl chain in phenylalkanoic acids is responsible for hydrophobic interaction resulting in shift of the spectra towards longer wavelength (red shift. The value of partition coefficient (Kx between the bulk water and surfactant micelles and in turn standard free energy change of solubilization (ΔGpº were also estimated by measuring the differential absorbance (ΔA of the additives in micellar solutions.


    Institute of Scientific and Technical Information of China (English)

    黄晓东; 娄本勇


      榴莲壳经甲醛/硫酸混合溶液处理后制备成吸附剂。研究了吸附剂对十六烷基三甲基溴化铵(CTAB)的吸附性能,考察了溶液pH值、吸附剂用量、起始浓度、吸附时间、浓度和温度的影响。结果表明,吸附容量在pH值7~11范围内达到最大值,CTAB的去除率随着吸附剂用量增加而增大,当吸附剂用量为0.5 g时,CTAB的去除率达97.5%。吸附容量也随着起始浓度的增加而增大,并在120 min达到吸附平衡。运用3种动力学模型对吸附过程进行拟合,结果表明吸附过程可以很好地用准二级动力学方程描述。吸附等温线用 Langmuir 方程的拟合效果优于Freundlich或Tempkin方程。在热力学研究中,ΔGo0,ΔSo>0,表明此吸附过程是自发、吸热和熵增加的过程。%  The durian shells(DS) were modified as adsorbents by treating with a mixed solution of formaldehyde/sulphuric acid and the adsorption behavior for cetyltrimethyl ammonium bromide (CTAB) was investigated. The affecting factors such as solution pH, adsorbent dosage, initial concentration, adsorption time, concentration and temperature were disscussed. The results showed that the adsorption capacity reached a maximum value at pH 7~11 and removal rate of CTAB would increase with the increasement of adsorbent dosage. When the adsorbent dosage was up to 0.5 g, removal rate would reach 97.5%. The adsorption capacity also increases with the increasement of initial concentration, and adsorption equilibrium was achieved after 120 min. Three kinds of dynamic models were used to simulate adsorption kinetics. The result showed that the adsorption process well followed a pseudo-second order equation. The adsorption isotherm could be described very well by Langmuir model rather than Freundlich or Tempkin models. In thermodynamic studies, the parameters of ΔGo 0 and ΔSo > 0 indicated that the adsorption process was spontaneous and endothermic with a

  8. Growth Mechanism of Gold Nanorods in Binary Surfactant System

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Bo-Mi; Seo, Sun-Hwa; Joe, Ara; Shim, Kyu-Dong; Jang, Eue-Soon [Kumoh National Institute of Technology, Gumi (Korea, Republic of)


    In order to reveal the growth mechanism of gold nanorods (GNRs) in a binary surfactant system, we synthesized various GNRs by changing the concentration of the surfactants, AgNO{sub 3}, and HBr in the growth solution. We found that the benzyldime thylhexadecylammoniumchloride surfactant had weak interaction with the gold ions, but it could reduce the membrane fluidity. In addition, we could dramatically decrease the cetyltrimethylammonium bromide concentration required for GNR growth by adding an HBr solution. Notably, Ag{sup +} ions were necessary to break the symmetry of the seed crystals for GNR growth, but increasing the concentration of Ag{sup +} and Br{sup -} ions caused a decrease in the template size.

  9. Effect of surfactant species and electrophoretic medium composition on the electrophoretic behavior of neutral and water-insoluble linear synthetic polymers in nonaqueous capillary zone electrophoresis. (United States)

    Fukai, Nao; Kitagawa, Shinya; Ohtani, Hajime


    We have recently demonstrated the separation of neutral and water-insoluble linear synthetic polymers in nonaqueous capillary zone electrophoresis (NACZE) using a cationic surfactant of cetyltrimethylammonium chloride (CTAC). In this study, eight ionic surfactants were investigated for the separation of four synthetic polymers (polystyrene, polymethylmethacrylates, polybutadiene, and polycarbonate); only three surfactants (CTAC, dimethyldioctadecylammonium bromide, and sodium dodecylsulfate) caused their separation. The order of the interaction between the polymers and the surfactants depended on both the surfactant species and the composition of the electrophoretic medium. Their investigation revealed that the separation is majorly affected by the hydrophobic interactions between the polymers and the ionic surfactants. In addition, the electrophoretic behavior of polycarbonate suggested that electrostatic interaction also affects the selectivity of the polymers. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. FTIR analysis of the metabolomic stress response induced by N-alkyltropinium bromide surfactants in the yeasts Saccharomyces cerevisiae and Candida albicans. (United States)

    Corte, Laura; Tiecco, Matteo; Roscini, Luca; Germani, Raimondo; Cardinali, Gianluigi


    The activity of surfactants against fungal cells has been studied less than against bacteria, although the medical and industrial importance of the former is of paramount importance. In this paper the surfactant biocidal effect was measured in the yeasts Saccharomyces cerevisiae and Candida albicans with a previously described FTIR bioassay which estimates the stress level as function of the FTIR spectra variation of the cells upon exposition to the chemicals. N-tetradecyltropinium bromide was chosen as stressing agent on the basis of previous preliminary study demonstrating its ability to kill prokaryotic and especially eukaryotic cells at concentration around or over the critical micellar concentration (c.m.c.). Here we show that this surfactant is able to inactivate S. cerevisiae cells at 0.4mM and C. albicans cells at 0.6mM after 1h exposition. FTIR analysis revealed that the surfactant induced metabolomics reactions of S. cerevisiae cells in the regions of amides (W2) and fatty acids (W1). In the same way C. albicans cells showed the maximum stress response in amides (W2) and mixed (W3) regions. Variations of the hydrophobic tail of this surfactant produced a reduced level of cell stress with both the 12C and 16C variants; although these two compounds were more effective in inducing cell mortality in S. cerevisiae but not in C. albicans. In conclusion, this paper has shown that, for this surfactant, the n-alkyl chain must vary between 12C and 16C and that the hydrophilic head size is not as critical as the tail length.

  11. Determination of some solubilization parameters with surfactants of egg-yolk lecithin multilamellar vesicles by static light-scattering measurements

    CERN Document Server

    Hobai, S; Hobai, St.; Fazakas, Zita


    Effective surfactant:phospholipid ratios (i.e. molar ratios in the mixed aggregates, vesicles or micelles) have been determined by static light-scattering for the interaction of egg-yolk lecithin (EYL) multilamellar vesicles (MLV) with Triton X-100 (TX-100), sodium deoxycholate (DOCNa) and cetyltrimethylammonium bromide (CTMB). The suspension of MLV-EYL was mixed with appropriate volumes of surfactant solution and was left overnight to reaches thermodynamic equilibrium. Rectan-gular optic diffusion data were used to compute the solubilization parameters: total surfactant concentrations, at saturation and solubilization Dtsat and Dtsol respectively, and effective molar ratios, Resat and Resol respectively. From the Resat value ob-tained graphically for interaction of vesicles with TX-100 resulted that in vesicle bilayers a surfactant molecule is surrounded with seven phospholipid molecules and the Resol value suggests that in mixed micelles ten lipid molecules with about fifteen surfactant molecules coexist. T...

  12. Interaction between cationic surfactant of 1-methyl-3-tetradecylimidazolium bromide and anionic polymer of sodium polystyrene sulfonate

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Qian [College of Chemistry and Chemical Engineering, Liaocheng University, Shandong Province, VIC 252059 (China); School of Chemistry and Chemical Engineering, Engineering Research Center for Fine Chemicals of Ministry of Education, Shanxi University, Shanxi Province, VIC 030006 (China); Kang, Wenpei [Key Laboratory of Colloid and Interface Chemistry, Shandong University, Ministry of Education, Shandong Province, VIC 250100 (China); Sun, Dezhi [College of Chemistry and Chemical Engineering, Liaocheng University, Shandong Province, VIC 252059 (China); Liu, Jie, E-mail: [College of Chemistry and Chemical Engineering, Liaocheng University, Shandong Province, VIC 252059 (China); Wei, Xilian, E-mail: [College of Chemistry and Chemical Engineering, Liaocheng University, Shandong Province, VIC 252059 (China)


    The interaction between long-chain imidazolium ionic liquid (C{sub 14}mimBr) and anionic polyelectrolyte of sodium polystyrene sulfonate (NaPSS) has been studied using surface tension, isothermal titration microcalorimetry (ITC), dynamic light scatting (DLS) and conductance methods. The result shows that the surface tension plots have a pronounced hump in the surface tension at surfactant concentrations below the critical micelle concentration (cmc) of the surfactant. The cooperative adsorption of surfactant and polymer on the surface (PS{sub S}) and the formation of polymer/surfactant aggregate in bulk solution (PS{sub M}) provide a rational explanation about it. The formation of surfactant/polymer complexes is affected by the concentration of the surfactant or NaPSS, which is also ascertained by ITC and DLS measurements. Further, the thermodynamic parameters are derived from calorimetric titration and conductance curves, and the effects of polymer concentration and temperature on the parameters are evaluated in detail.

  13. Surface tension method for determining binding constants for cyclodextrin inclusion complexes of ionic surfactants

    Energy Technology Data Exchange (ETDEWEB)

    Dharmawardana, U.R.; Christian, S.D.; Tucker, E.E.; Taylor, R.W.; Scamehorn, J.F. (Univ. of Oklahoma, Norman, OK (United States))


    A new method has been developed for determining binding constants of complexes of cyclodextrins with surface-active compounds, including water-soluble ionic surfactants. The technique requires measuring the change in surface tension caused by addition of a cyclodextrin (CD) to aqueous solutions of the surfactant; the experimental results lead directly to inferred values of the thermodynamic activity of the surfactant. Surface tension results are reported for three different surfactants sodium dodecyl sulfate (SDS), cetylpyridinium chloride (CPC), and cetyltrimethylammonium bromide (CTAB) in the presence and in the absence of added [beta]-CD. Data for CPC have been obtained at surfactant concentrations below and above the critical micelle concentration. Correlations between surface tension and surfactant activity are expressed by the Szyszkowski equation, which subsumes the Langmuir adsorption model and the Gibbs equation. It is observed that the surface tension increases monotonically as [beta]-cyclodextrin is added to ionic surfactant solutions. At concentrations of CD well in excess of the surfactant concentration, the surface tension approaches that of pure water, indicating that neither the surfactant-CD complexes nor CD itself are surface active. Binding constants are inferred from a model that incorporates the parameters of the Szyszkowski equation and mass action constants relating to the formation of micelles from monomers of the surfactant and the counterion. Evidence is given that two molecules of CD can complex the C-16 hydrocarbon chain of the cetyl surfactants. 30 refs., 5 figs., 1 tab.

  14. Effects of surfactants and salt on Henry's constant of n-hexane. (United States)

    Yang, Chunping; Chen, Fayuan; Luo, Shenglian; Xie, Gengxin; Zeng, Guangming; Fan, Changzheng


    n-Hexane biological removal is intrinsically limited by its hydrophobic nature and low bioavailability. The addition of surfactants could enhance the transport of volatile organic compounds (VOCs) and change the gas-liquid equilibrium of VOCs. In this paper, the effects of four surfactants, sodium dodecyl sulfate (SDS), cetyltrimethylammonium bromide (CTAB), tert-octylphenoxypoly-ethoxyethanol (Triton X-100), polyoxyethylene (20) sorbitan monooleate (Tween 80), and sodium nitrate on apparent Henry's constant of n-hexane in surfactant solutions were investigated. The apparent Henry's constants were significantly reduced when surfactants concentrations exceeded their critical micelle concentrations (cmc's). On a cmc basis, the anionic surfactant SDS was found to have the greatest effect on the apparent Henry's constant with CTAB succeeding, then followed by Triton X-100 and Tween 80. However, the apparent Henry's constant of n-hexane decreased even more rapidly when Triton X-100, a nonionic surfactant, was added than when the ionic surfactant of SDS or CTAB was applied under identical mass concentration and other conditions. These results suggest that Triton X-100 have the biggest solubilization of n-hexane among the four surfactants. Sodium nitrate slightly decreased the apparent Henry's constant of n-hexane in surfactant solutions, and could be considered as a cosolvent in the surfactant-(n-hexane) solution. In addition, the relationship between apparent Henry's constant and surfactant concentration was further developed.

  15. Fabrication of the tricontinuous mesoporous IBN-9 structure with surfactant CTAB

    KAUST Repository

    Zhao, Yunfeng


    IBN-9 is the first tricontinuous mesoporous material, consisting of three identical interpenetrating channels that are separated by a single continuous silica wall. It was originally synthesized using a specially designed surfactant as template. The need of special surfactant in the synthesis inhibits extensive investigation of this novel structure and its applications. We demonstrate in this study that such a complicated tricontinuous mesostructure can also be fabricated from the most common and commercially available surfactant cetyltrimethylammonium bromide (CTAB) with the help of polar organic additives, e.g., n-butanol. The role of n-butanol is to finely tune the surface curvature of the organic/inorganic interface during the cooperative self-assembly process. Electron microscopic techniques are employed to identify different mesostructures from the mixture. This study reveals the possibility of discovering unprecedented mesostructures from conventional surfactant-water- silicates systems. © 2011 American Chemical Society.

  16. Synthesis and crystal structures of gold nanowires with Gemini surfactants as directing agents. (United States)

    Xu, Feng; Hou, Hao; Gao, Zhinong


    The preparation of crystalline gold nanowires (NWs) by using gemini surfactants as directing agents through a three-step seed-mediated method is reported. Unlike the nanorods with relatively low aspect ratios (typically below 20) obtained by using cetyltrimethylammonium bromide as a directing agent, the NWs obtained in this investigation can reach up to 4.4 μm, and the largest aspect ratio is calculated to be 210. For this, each of seven different gemini surfactants are utilized as directing agents, and the length and/or aspect ratio of the NWs can be tuned by varying the hydrocarbon chain lengths of the gemini surfactants. Both single and twinned crystalline structures are elucidated by selected-area electron diffraction and high-resolution transmission electron microscopy studies. The use of gemini surfactants not only advances the synthesis of gold nanostructures, but improves the understanding of the growth mechanism for seed-mediated growth.

  17. Cyclic voltammetric technique for the determination of the critical micelle concentration of surfactants, self-diffusion coefficient of micelles, and partition coefficient of an electrochemical probe

    Energy Technology Data Exchange (ETDEWEB)

    Mandal, A.B.; Nair, B.U. (Central Leather Research Inst., Madras (India))


    Critical micelle concentrations (cmc) of cetyltrimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC) surfactants in aqueous solution have been determined by using the cyclic voltammetric technique. (Co(en){sub 3})(ClO{sub 4}){sub 3} has been used as the redox-active electrochemical probe. The cmc values so obtained for the surfactants were found to be in good agreement with the literature values. The partition coefficient, K, of the electrochemical probe between water and surfactants in nonmicellar and micellar states was estimated using the peak current, i{sub p} and half-wave potential, E{sub 1/2} values. The self-diffusion coefficient, D{sub m}, interaction parameter, k{sub f}, and hydrodynamic radius of the micelles were also estimated. The results suggest that the probe is sensitive to the nature of surfactant as well as surfactant concentration.

  18. Sorptive affinity of ionic surfactants on silt loamy soil

    Directory of Open Access Journals (Sweden)

    Xingchao Qi


    Full Text Available Due to their broad applications, ionic surfactants have already been released into or utilized in soil and environmental systems. However, current understanding on the sorption behavior of surfactants onto soils is still limited. This work systematically investigated the sorption kinetics and isotherms of one cationic surfactant, cetyltrimethylammonium bromide (CTAB, and one anionic surfactant, sodium dodecyl sulfate (SDS, onto a silt loamy soil to determine the governing sorption mechanisms. The pseudo-second-order rate equation described the sorption kinetics data better than the pseudo-first-order rate equation. Experimental data showed that the sorption equilibrium for CTAB and SDS were reached at 24 and 240 h, respectively. Langmuir equation was better than Freundlich equation in simulating the sorption isotherms of CTAB and SDS on the soil. Soil Langmuir maximum sorption capacity of CTAB was much higher than that to SDS. When the experimental temperature increased, the sorption of CTAB and SDS on the soil decreased. In addition, the sorptive process of the surfactants on the soil was spontaneous and exothermal, as indicated by the absolute values of Gibbs free energy and enthalpy. The results also indicated that physical sorption was the dominant mechanism for the sorption of the two surfactants on the soil. Findings from this work are crucial to understand the environmental behaviors of ionic surfactants.

  19. Thermodynamic and Spectroscopic Investigation of Interactions between Reactive Red 223 and Reactive Orange 122 Anionic Dyes and Cetyltrimethyl Ammonium Bromide (CTAB Cationic Surfactant in Aqueous Solution

    Directory of Open Access Journals (Sweden)

    Muhammad Irfan


    Full Text Available The present study describes the conductometric and spectroscopic study of the interaction of reactive anionic dyes, namely, reactive red 223 and reactive orange 122 with the cationic surfactant cetyltrimethyl ammonium bromide (CTAB. In a systematic investigation, the electrical conductivity data was used to calculate various thermodynamic parameters such as free energy (ΔG, enthalpy (ΔH, and the entropy (ΔS of solubilization. The trend of change in these thermodynamic quantities indicates toward the entropy driven solubilization process. Moreover, the results from spectroscopic data reveal high degree of solubilization, with strong interactions observed in the cases of both dyes and the CTAB. The spontaneous nature of solubilization and binding was evident from the observed negative values of free energies (ΔGp and ΔGb.

  20. Thermodynamic and spectroscopic investigation of interactions between reactive red 223 and reactive orange 122 anionic dyes and cetyltrimethyl ammonium bromide (CTAB) cationic surfactant in aqueous solution. (United States)

    Irfan, Muhammad; Usman, Muhammad; Mansha, Asim; Rasool, Nasir; Ibrahim, Muhammad; Rana, Usman Ali; Siddiq, Mohammad; Zia-Ul-Haq, Muhammad; Jaafar, Hawa Z E; Khan, Salah Ud-Din


    The present study describes the conductometric and spectroscopic study of the interaction of reactive anionic dyes, namely, reactive red 223 and reactive orange 122 with the cationic surfactant cetyltrimethyl ammonium bromide (CTAB). In a systematic investigation, the electrical conductivity data was used to calculate various thermodynamic parameters such as free energy (ΔG), enthalpy (ΔH), and the entropy (ΔS) of solubilization. The trend of change in these thermodynamic quantities indicates toward the entropy driven solubilization process. Moreover, the results from spectroscopic data reveal high degree of solubilization, with strong interactions observed in the cases of both dyes and the CTAB. The spontaneous nature of solubilization and binding was evident from the observed negative values of free energies (ΔG p and ΔG b).

  1. Wormlike Micelle Formation and Rheological Behavior in the Aqueous Solutions of Mixed Sulfate Gemini Surfactant without Spacer Group and Dodecyltrimethylammonium Bromide%Wormlike Micelle Formation and Rheological Behavior in the Aqueous Solutions of Mixed Sulfate Gemini Surfactant without Spacer Group and Dodecyltrimethylammonium Bromide

    Institute of Scientific and Technical Information of China (English)

    裴晓梅; 赵剑曦; 游毅; 刘玉芳; 魏西莲


    The rheological behavior of the aqueous solutions of mixed sulfate gemini surfactant with no spacer group, referred to as d-C12S, and dodecyltrimethylammonium bromide (C12TABr) at a total concentration of 100 mmol,L-1 but different molar ratios of ClzTABr to d-C12S (a1) was investigated using steady rate and frequency sweep measurements. The wormlike micelles were formed over a narrow a1 range of 0.20-0.27. The viscoelastic solutions exhibited Maxwell fluid behavior. At the optimum molar ratio of 0.25, the zero-shear viscosity was as high as 600 paos and the length of the mixed wormlike micelle was about 0.45-0.85 pm. The present result provides an exam- ple to construct long wormlike micelles by anionic gemini surfactant.

  2. First evaluation of the thermodynamic properties for spheres to elongated micelles transition of some propanediyl-alpha,omega-bis(dimethylalkylammonium bromide) surfactants in aqueous solution. (United States)

    Fisicaro, Emilia; Compari, Carlotta; Duce, Elenia; Contestabili, Cristina; Viscardi, Guido; Quagliotto, Pierluigi


    The apparent and partial molar enthalpies, apparent molar volumes, and adiabatic compressibilities at 298 K of the aqueous solutions of the cationic gemini surfactants propanediyl-alpha,omega-bis(octyldimethylammonium bromide) (8-3-8) and propanediyl-alpha,omega-bis(dodecyldimethylammonium bromide) (12-3-12) have been measured as a function of concentration. The trends of the partial molar enthalpies versus concentration are the first well documented thermodynamic evidence of sphere to rod transition in the micellar phase, involving a detectable quantity of heat, and allow the determination of the change in enthalpy associated with this transition. The changes in enthalpies upon micellization and for the sphere to elongated micelles transition, DeltaH(s)(-->)(r), have been obtained from the experimental data by using a pseudo-phase transition approach: -1.5 kJ mol(-1) for 8-3-8 and -3.9 kJ mol(-1) for 12-3-12. No evidence of the above transition is found in the trends of volumetric properties versus m. The apparent adiabatic molar compressibilities for the compounds under investigation are also reported here for the first time: a negative group contribution for the methylene group is evaluated, when the surfactants are present in solution as a single molecule, reflecting its solvation structure. In the micellar phase, the -CH(2)- group contribution becomes positive. A value of 1.17 x 10(-3) cm(3) bar(-1) mol(-1) for the change in adiabatic molar compressibility upon micellization is obtained. The lower values of the methylene group contributions to the volumetric properties for the monomers support the hypothesis of partial association of the chains before the cmc.

  3. Solubilization and degradation of perchloroethylene (PCE) in cationic and nonionic surfactant solutions

    Institute of Scientific and Technical Information of China (English)

    Sivaram Harendra; Cumaraswamy Vipulanandan


    Solubilization of perchloroethylene (PCE) in a nonionic (Triton X-100) and a cationic (cetyltrimethylammonium bromide (CTAB)) surfactant solutions and the degradation of surfactant solubilized PCE using fine to nanosize Fe and bi-metallic Fe-Ni particles were investigated.Micelle partition coefficients (Km) and molar solubility ratio (MSR) for PCE in 10 g/L of surfactant solutions have been quantified and the solubility of PCE (100 mg/L in water) in the surfactant solutions increased by about ten fold.Of the two surfactants studied,Triton X-100 solubilized the higher amount of PCE per gram of surfactant.To degrade solubilized PCE,both iron and bimetallic Fe-Ni particles were used in continuously stirred batch reactors.The iron and bi-metallic particles were synthesized using the solution method and the particles were characterized using the SEM,EDS,TEM and XRD.The PCE solubilized up to 500 mg/L in both surfactant solutions were totally degraded at various rates by 200 g/L of bi-metallic Fe-Ni particles in less than 20 hr,which is the highest concentration of PCE degraded in the shortest time compared to data in the literature.The degradations of PCE solubilized in surfactant solutions were represented by nonlinear kinetic relationships which depended on the type of surfactant used for solubilizing the PCE.

  4. Thermodynamic insights into drug-surfactant interactions: Study of the interactions of naporxen, diclofenac sodium, neomycin, and lincomycin with hexadecytrimethylammonium bromide by using isothermal titration calorimetry. (United States)

    Choudhary, Sinjan; Talele, Paurnima; Kishore, Nand


    The success of drug delivery depends on the efficiency of the route of administration, which in turn relies on properties of the drug and its transport vehicle. A quantitative knowledge of association of drugs with transport vehicles is lacking when the latter are in the category of self assembled structures. The work reported in this manuscript addresses the mechanism of partitioning of naproxen, diclofenac sodium, neomycin and lincomycin in the micelles of hexadecytrimethylammonium bromide and that is quantitatively based on the measurement of thermodynamic parameters of interactions by using isothermal titration calorimetry. The addressed mechanism of partitioning is based on the identification of the type of interactions of these drugs with the surfactant micelles and monomers, along with the effect of the former on the micellization properties of the surfactant. The conclusions are based on the interpretation of the values of partitioning constant, standard molar enthalpy change, standard molar entropy change and the stoichiometry of the interaction. The results of this study have implications for deriving guidelines for the target oriented synthesis of new drugs that are to be used for effective delivery via micellar media. Copyright © 2015 Elsevier B.V. All rights reserved.

  5. Interactions of phenol with cationic micelles of hexadecyltrimethylammonium bromide studied by titration calorimetry, conductimetry, and 1H NMR in the range of low additive and surfactant concentrations. (United States)

    Chaghi, Radhouane; de Ménorval, Louis-Charles; Charnay, Clarence; Derrien, Gaëlle; Zajac, Jerzy


    Interactions of phenol (PhOH) with micellar aggregates of hexadecyltrimethylammonium bromide (HTAB) in aqueous solutions at surfactant concentrations close to the CMC and phenol contents of 1, 5, or 10 mmol kg(-1) have been investigated at 303 K by means of titration calorimetry, solution conductimetry, and (1)H NMR spectroscopy. Estimates of the main thermodynamic parameters related to HTAB micellization were made for PhOH/HTAB/H(2)O systems based on the specific conductivity measurements and calorimetric determination of the cumulative enthalpy of dilution as functions of the surfactant concentration at a fixed additive content. The combined analysis of the results obtained in H(2)O solutions pointed to the preferential location of PhOH in the outer micelle parts by an enthalpy-driven mechanism. Additional PhOH molecules were located increasingly deeper within the micelle core. The (1)H NMR study of PhOH solubilization by 1.5 mmol kg(-1) HTAB solutions in D(2)O indicated that the two categories of the solubilization site became saturated with the solubilizate already at the lowest additive content. Dissimilar amounts of the solubilized material in H(2)O and D(2)O solutions were ascribed to the difference in the initial micelle structures formed in the two solvents, as inferred from calorimetry and (1)H NMR studies of the HTAB micellization in D(2)O and H(2)O.

  6. Surfactant-directed polypyrrole/CNT nanocables: synthesis, characterization, and enhanced electrical properties. (United States)

    Zhang, Xuetong; Zhang, Jin; Wang, Rongming; Zhu, Tao; Liu, Zhongfan


    We describe here a new approach to the synthesis of size-controllable polypyrrole/carbon nanotube (CNT) nanocables by in situ chemical oxidative polymerization directed by the cationic surfactant cetyltrimethylammonium bromide (CTAB) or the nonionic surfactant polyethylene glycol mono-p-nonylphenyl ether (Opi-10). When carbon nanotubes are dispersed in a solution containing a certain concentration of CTAB or Opi-10, the surfactant molecules are adsorbed and arranged regularly on the CNT surfaces. On addition of pyrrole, some of the monomer is adsorbed at the surface of CNTs and/or wedged between the arranged CTAB or Opi-10 molecules. When ammonium persulfate (APS) is added, pyrrole is polymerized in situ at the surfaces of the CNTs (core layer) and ultimately forms the outer shell of the nanocables. Such polypyrrole/CNT nanocables show enhanced electrical properties; a negative temperature coefficient of resistance at 77-300 K and a negative magnetoresistance at 10-200 K were observed.

  7. Solubilization isotherms of aromatic solutes in surfactant aggregates

    Energy Technology Data Exchange (ETDEWEB)

    Gadelle, F.; Koros, W.J.; Schechter, R.S. (Univ. of Texas, Austin, TX (United States). Dept. of Chemical Engineering)


    Several factors affecting solubilization of aromatic solutes in surfactant micelles have been investigated. Solubilization isotherms of benzene, toluene, and chlorobenzene in various aqueous micellar solutions were determined using head space gas chromatography. Cationic surfactants such as cetylpyridinium chloride or cetyltrimethylammonium bromide present high solubilization capacities. Comparable anionic surfactants exhibit lower solubilization and a greater tendency to precipitate. It was observed that nonionic surfactants show high solubilization on a molar basis. Solubilization in mixed cationic-anionic micelles was also investigated. It also appears that the molecular size of the solute determines the extent of the solubilization. Finally, the shape of the different isotherms indicates that knowing the amount solubilized at saturation of the micellar solution is not sufficient to estimate solubilization at solute concentrations lower than the solute aqueous solubility. Solubilization of organics in surfactant micelles is of major importance in many applications. One new application is micellar-enhanced ultrafiltration. Another application of interest is the surfactant-enhanced aquifer remediation, a process in which a micellar aqueous solution is flushed into contaminated groundwaters to enhance recovery of pollutants by micellar solubilization.

  8. Gemini surfactant dimethylene-1,2-bis(tetradecyldimethylammonium bromide)-based gene vectors: a biophysical approach to transfection efficiency. (United States)

    Cardoso, Ana M S; Faneca, Henrique; Almeida, João A S; Pais, Alberto A C C; Marques, Eduardo F; de Lima, Maria C Pedroso; Jurado, Amália S


    Cationic liposomes have been proposed as biocompatible gene delivery vectors, able to overcome the barriers imposed by cell membranes. Besides lipids, other surfactant molecules have been successfully used in the composition of gene carriers. In the present work, we used a Gemini surfactant, represented by the general structure [C(14)H(29)(CH(3))(2)N(+)(CH(2))(2)N(+)(CH(3))(2)C(14)H(29)]2Br(-) and herein designated 14-2-14, to prepare cationic gene carriers, both as the sole component and in combination with neutral helper lipids, cholesterol and DOPE. The effectiveness of three Gemini-based formulations, namely neat 14-2-14, 14-2-14:Chol (1:1 molar ratio) and 14-2-14:Chol:DOPE (2:1:1 molar ratio), to mediate gene delivery was evaluated in DNA mixtures of +/- charge ratios ranging from 1/1 to 12/1. After ruling out cytotoxicity as responsible for the differences observed in the transfection competence, structural and physical properties of the vector were investigated, using several techniques. The size and surface charge density (zeta potential) of surfactant-based structures were determined by conventional techniques and the thermotropic behaviour of aqueous dispersions of surfactant/lipid/DNA formulations was monitored by fluorescence polarization of DPH and DPH-PA probes. The capacity of lipoplexes to interact with membrane-mimicking lipid bilayers was evaluated, using the PicoGreen assay and a FRET technique. Our data indicate inefficiency of the neat 14-2-14 formulation for gene delivery, which could result from the large dimensions of the particles and/or from its relative incompetence to release DNA upon interaction with anionic lipids. The addition of cholesterol or cholesterol and DOPE conferred to Gemini-based gene carrier transfection activity at specific ranges of +/- charge ratios. Fluorescence polarization data suggest that an order parameter within a specific range was apparently needed for complexes to display maximal transfection efficiency. The

  9. Perfluorinated Alcohols Induce Complex Coacervation in Mixed Surfactants. (United States)

    Jenkins, Samuel I; Collins, Christopher M; Khaledi, Morteza G


    Recently, we reported a unique and nearly ubiquitous phenomenon of inducing simple and complex coacervation in solutions of a broad variety of individual and mixed amphiphiles and over a wide range of concentrations and mole fractions. This paper describes a novel type of biphasic separation in aqueous solutions of mixed cationic-anionic (catanionic) surfactants induced by hexafluoroisopropanol (HFIP). The test cases included mixtures of cetyltrimethylammonium bromide (CTAB) and sodium dodecyl sulfate (SDS) (surfactants with different carbon chain lengths) as well as dodecyltrimethylammonium bromide (DTAB) with SDS (surfactants with the same carbon chain lengths). The CTAB-SDS-HFIP coacervate systems can be produced at many different mole ratios of surfactant, but DTAB-SDS-HFIP formed only coacervates at equimolar (1:1) mole ratios of DTAB and SDS. The phase-transition behavior of both systems was studied over a wide range of surfactant and HFIP concentrations at the stoichiometric (1:1) mole ratio of cationic/anionic surfactants. The chemical compositions of each of the two phases (aqueous-rich and coacervate phases) were studied with regard to the concentrations of HFIP, water, and individual surfactants. It is revealed that the surfactant-rich phase (coacervate phase) contains a large percentage of fluoroalcohol relative to the aqueous phase and is enriched in both surfactants but contains a small percentage of water. Surprisingly, the concentration of water in the coacervate phase increases as the total HFIP concentration is increased while the concentration of HFIP in the coacervate phase remains relatively constant, which means a larger amount of water associated with HFIP molecules is extracted into the coacervate phase, which results in the growth of the phase. The volume of the coacervate phase increases with an increase in surfactant concentration and total HFIP %. The coacervate phase is highly enriched in the two amphiphilic ions (DTA(+) and DS

  10. Surfactant-Enhanced Phytoremediation of Soils Contaminated with Hydrophobic Organic Contaminants: Potential and Assessment

    Institute of Scientific and Technical Information of China (English)

    GAO Yan-Zheng; LING Wan-Ting; ZHU Li-Zhong; ZHAO Bao-Wei; ZHENG Qing-Song


    Phytoremediation is becoming a cost-effective technology for the in-situ clean up of sites polluted with hydrophobic organic contaminants (HOCs). The major factors limiting phytoremediation are the mass transfer, rate of plant uptake, and microbial biodegradation of HOCs. This article discusses the potential of surfactants to enhance desorption, plant uptake, and biodegradation of HOCs in the contaminated sites. Positive effects of surfactants on phytoremediation have been recently observed in greenhouse studies. The presence of some nonionic surfactants including polyoxyethylene sorbitan monooleate (Tween 80) and polyoxyethylene(23)dodecanol (Brij35) at relatively low concentrations resulted in significant positive effects on phytoremediation for pyrene-contaminated soil. However, the anionic surfactant (sodium dodecyl sulfate, SDS) and the cationic surfactant (cetyltrimethylammonium bromide, CTMAB) were not useful because of their phytotoxicity or low efficiency for surfactant-enhanced phytoremediation (SEPR). The mechanisms of SEPR for HOC-contaminated sites were evaluated by considering experimental observations. In view of concerns about the cost effectiveness and toxicity of surfactants to plants, more research is needed to enhance the use of SEPR technology.

  11. Dynamic contact angles on PTFE surface by aqueous surfactant solution in the absence and presence of electrolytes. (United States)

    Chaudhuri, Rajib Ghosh; Paria, Santanu


    This study presents the experimental results on dynamic contact angles of pure surfactants and surfactants with electrolyte solutions on PTFE (Teflon) surface. Dynamic advancing (theta(A)) and receding (theta(R)) contact angles measurements by the Wilhelmy plate technique were carried out for aqueous solution of three different surfactants Triton X-100 (TX-100), sodium dodecylbenzene sulfonate (SDBS), and cetyltrimethylammonium bromide (CTAB). The same measurements in the presence of different electrolytes NaCl, Na(2)SO(4), and CaCl(2) for ionic surfactants (SDBS and CTAB) were also carried out to see the change in contact angle and wetting behavior. The presence of electrolytes changes the advancing contact angle as well as wetting properties of hydrophobic solid surface significantly even at very low surfactant concentration. Counter ion valency of the electrolyte is more important in reducing advancing contact angle on hydrophobic PTFE surface at very low concentration of ionic surfactants from CMC. Pure surfactants and ionic surfactants in the presence of electrolytes show a linear relationship between the adhesional tension and surface tension at air-water interface with different slope and intercept.

  12. Formation at low surfactant concentrations and characterization of mesoporous MCM-41

    Institute of Scientific and Technical Information of China (English)

    陈晓银; 丁国忠; 陈海鹰; 李全芝


    At low concentrations of cetyltrimethylammonium bromide,all silica-based mesoporous materials with hexagonal phase have been synthesized via interactions between self-assembled surfactant molecule aggregates and aniomc silicate polymers.The resulting materials are characterized by XRD,FT-IR,solid state 29Si MAS NMR,thermal analysis and N2 adsorption-desorption measurements.After soluble ions are removed,the interactors between surfactant micelles and silicate polymers are reorganized and then form mesostructures 1 he hexagonal framework is sonsistent with amorphous silica gel.The structures of materials depend on the synthesis conditions Hydrothermal process improves the interactions between molecules and increases the degree of framework silicon atom polymerization The.surface area and the mesopore volume of the material prepared at 100℃ increase by 87% and 71 %,respectively,compared with those obtained at room temperature.

  13. Effect of Different Surfactants on the Interfacial Behavior of the n-Hexane-Water System in the Presence of Silica Nanoparticles. (United States)

    Biswal, Nihar Ranjan; Rangera, Naveen; Singh, Jayant K


    This paper presents the effect of negatively charged silica nanoparticles (NPs) on the interfacial tension of the n-hexane-water system at variable concentrations of four different surfactants, viz., an anionic surfactant, sodium dodecyl sulfate (SDS), a cationic surfactant, cetyltrimethylammonium bromide (CTAB), and two nonionic surfactants, Tween 20 and Triton X-100 (TX-100). The presence of negatively charged silica nanoparticles is found to have a different effect depending on the type of surfactant. In the case of ionic surfactants, SDS and CTAB, silica NPs reduce the interfacial tension of the system. On the contrary, for nonionic surfactants, Tween 20 and TX-100, silica NPs increase the interfacial tension. The increasing/decreasing nature of the interfacial tension in the presence of NPs is well supported by the calculated surface excess concentrations. The diffusion kinetic control (DKC) and statistical rate theory (SRT) models are used to understand the behavior of dynamic interfacial tension of the surfactant-NP-oil-water system. The DKC model is found to describe the studied surfactant-NP-oil-water systems more aptly.

  14. Reducing plant uptake of PAHs by cationic surfactant-enhanced soil retention

    Energy Technology Data Exchange (ETDEWEB)

    Lu Li, E-mail: [Department of Environmental Science, Zhejiang University, Hangzhou, Zhejiang 310028 (China); Zhu Lizhong, E-mail: [Department of Environmental Science, Zhejiang University, Hangzhou, Zhejiang 310028 (China); Ministry of Education Key Laboratory of Environmental Remediation and Ecological Health, Zhejiang University, Hangzhou, Zhejiang 310029 (China)


    Reducing the transfer of contaminants from soils to plants is a promising approach to produce safe agricultural products grown on contaminated soils. In this study, 0-400 mg/kg cetyltrimethylammonium bromide (CTMAB) and dodecylpyridinium bromide (DDPB) were separately utilized to enhance the sorption of PAHs onto soils, thereby reducing the transfer of PAHs from soil to soil solution and subsequently to plants. Concentrations of phenanthrene and pyrene in vegetables grown in contaminated soils treated with the cationic surfactants were lower than those grown in the surfactant-free control. The maximum reductions of phenanthrene and pyrene were 66% and 51% for chrysanthemum (Chrysanthemum coronarium L.), 62% and 71% for cabbage (Brassica campestris L.), and 34% and 53% for lettuce (Lactuca sativa L.), respectively. Considering the impacts of cationic surfactants on plant growth and soil microbial activity, CTMAB was more appropriate to employ, and the most effective dose was 100-200 mg/kg. - Cationic surfactants could enhance the retention of PAHs in soil, and reduce PAH transfer to and accumulation in vegetables.

  15. Phase behavior and shear alignment in SWNT-surfactant dispersions. (United States)

    Nativ-Roth, Einat; Yerushalmi-Rozen, Rachel; Regev, Oren


    The effect of single-walled carbon nanotubes (SWNT) on the phase behavior of the cationic surfactant cetyltrimethylammonium bromide (CTAB) in aqueous solutions is investigated at room temperature. Small-angle X-ray scattering (SAXS) and cryogenic transmission electron microscopy (cryo-TEM) are used for characterization of bulk dispersions and nanometrically thin films. Additional carbonaceous additives (fullerenes, multi-walled carbon nanotubes, and carbon black) serve as reference systems. It is found that dispersions of carbonaceous additive (excluding fullerenes) at intermediate surfactant concentrations (below the liquid-crystalline region of the native surfactant) induce demixing and macroscopic phase separation in otherwise homogeneous solutions of CTAB. Two coexisting liquid phases of similar CTAB concentrations are observed, with the carbonaceous species residing within the lower phase. At high CTAB concentrations (liquid-crystal region) the SWNTs are found to incorporate into the ordered lyotropic liquid-crystalline phase while preserving the native d-spacing. Investigation of nanometrically thin films at intermediate surfactant concentrations under external shear reveals shear-induced structure (SIS) in the presence of minute amounts of SWNTs. The effect is found to be exclusive to SWNT and does not occur in dispersions of other carbonaceous additives.

  16. Photocatalytic Degradation of Diethyl Phthalate with Surfactant Addition

    Institute of Scientific and Technical Information of China (English)

    ZHANG Tianyong; HU Juan; ZHANG Youlan; LI Bin; FEI Xuening


    This paper studies the adsorption of diethyl phthalate (DEP,an environmental hormone) on the surface of nanoscale TiO2, effects of pH value of solutions, initial concentrations of DEP and additive surfactant on photocatalytic degradation and dynamics of DEP. Under ultra violet illumination, the interaction between DEP and surfactants including DBS (sodium dodecylbenzenesulfonate), CTAB (cetyltrimethylammonium bromide), and OP-10 (nonylphenol polyoxyethylene ether)was exploited from the perspective of degradation speed calculated by the data of high pressure liquid chromatography (HPLC) and UV-Vis spectra, respectively. Photocatalytic degradation of DEP followed pseudo first-order reaction kinetics. DEP as substrate degraded fast when its initial concentration was 130 mg/L. TiO2 had certain adsorption ability of DEP. TiO2 could adsorb the most DEP at the approximately neutral pH of 6.91. Degradation of DEP was not affected obviously by ad ditives OP-10 and JBS. Degradation rate of DEP was not enhanced greatly in the presence of surfactants, but degradation of DBS was sped up. Degradation rate of DEP was depressed in the presence of additive CTAB. The more CTAB was added, the less DEP was degraded. Degradation rate of CTAB became slow with the increase of initial CTAB concentration. The possible adsorption models among TiO2, DEP and surfactants were given.

  17. Chemical Behavior of Cadmium in Purple Soil as Affected by Surfactants and EDTA

    Institute of Scientific and Technical Information of China (English)

    CHEN Yu-Cheng; XIONG Zhi-Ting; DONG Shan-Yan


    A soil batch experiment was conducted to investigate both separate and compound effects of three types of surfactants:anionic dodecylbenzene sulfonic acid sodiumsalt (DBSS), cationic cetyltrimethylammonium bromide (CTAB), and nonionic nonyl phenol polyethyleneoxy ether (TX-100), as well as ethylenediaminetetraacetic acid (EDTA) on cadmium solubility, sorption kinetics, and sorption-desorption behavior in purple soil. The results indicated that both individual application of the three types of surfactants and surfactants combined with EDTA could stimulate Cd extraction from the soil with a general effectiveness ranking of EDTA/TX-100 > EDTA/DBSS > EDTA/CTAB > EDTA > TX-100 >DBSS > CTAB. Further study showed that the compound application of surfactants and EDTA had stronger (P < 0.05)effects on Cd solubility than those added individually. The application of surfactants and EDTA to purple soil (P < 0.05)decreased the proportion of Cd sorbed, while their effectiveness ranking was similar to that of enhanced solubilization. The sorption kinetics of Cd in purple soil was best described by the double-constant equation, while the Freundlich equation gave an excellent fit to the sorption isotherm curves. Therefore, surfactant-enhanced remediation of Cd contaminated soil is feasible and further research should be conducted.

  18. Solubilization of octane in electrostatically-formed surfactant-polymer complexes. (United States)

    Zhang, Hui; Zeeb, Benjamin; Salminen, Hanna; Feng, Fengqin; Weiss, Jochen


    Polymers can be used to modulate the stability and functionality of surfactant micelles. The purpose of this study was to investigate the solubilization of an octane oil-in-water emulsion in mixtures of an anionic polymer (carboxymethyl cellulose) and anionic sodium dodecylsulphate (SDS), nonionic polyoxyethylene sorbitan monooleate (Tween 80) and cationic cetyltrimethylammonium bromide (CTAB) surfactant micelles using dynamic light scattering, microelectrophoresis and turbidity measurements. The results showed that the addition of anionic carboxymethyl cellulose accelerated octane solubilization in cationic CTAB and CTAB-Tween 80 micelles, but did not affect the solubilization behaviors of micelles that were nonionic and anionic. The surfactant-polymer interactions were also studied using isothermal titration calorimetry (ITC) to characterize different physiochemical interaction regions depending on surfactant concentration in surfactant-polymer systems. Upon octane solubilization in CTAB-carboxymethyl cellulose mixtures, shape transitions of polymer-micelle complexes may have taken place that altered light scattering behavior. Based on these results, we suggest a mechanism for oil solubilization in electrostatically-formed surfactant-polymer complexes.

  19. Studies on interfacial behavior and wettability change phenomena by ionic and nonionic surfactants in presence of alkalis and salt for enhanced oil recovery (United States)

    Kumar, Sunil; Mandal, Ajay


    Surfactant flooding is one of the most promising method of enhanced oil recovery (EOR) used after the conventional water flooding. The addition of alkali improves the performance of surfactant flooding due to synergistic effect between alkali and surfactant on reduction of interfacial tension (IFT), wettability alteration and emulsification. In the present study the interfacial tension, contact angle, emulsification and emulsion properties of cetyltrimethylammonium bromide (CTAB), sodium dodecyl sulfate (SDS) and polysorbate 80 (Tween 80) surfactants against crude oil have been investigated in presence of sodium chloride (NaCl) and alkalis viz. sodium hydroxide (NaOH), sodium carbonate (Na2CO3), ammonium hydroxide (NH4OH), sodium metaborate (SMB) and diethanolamine (DEA). All three surfactants significantly reduce the IFT values, which are further reduced to ultra-low value (∼10-4 mN/m) by addition of alkalis and salt. It has been found experimentally that alkali-surfactant systems change the wettability of an intermediate-wet quartz rock to water-wet. Emulsification of crude oil by surfactant and alkali has also been investigated in terms of the phase volume and stability of emulsion. A comparative FTIR analysis of crude oil and different emulsions were performed to investigate the interactions between crude oil and displacing water in presence of surfactant and alkali.

  20. Interaction of DNA with Cationic Gemini Surfactant Trimethylene-1, 3-bis (dodecyldimethyl-ammonium bromide) and Anionic surfactant SDS mixed system%DNA与阳离子gemini表面活性剂和阴离子表面活性剂SDS混合系统的相互作用

    Institute of Scientific and Technical Information of China (English)

    赵小芳; 尚亚卓; 刘洪来; 胡英; 姜建文


    The interaction of DNA with cationic gemini surfactant trimethylene-1,3-bis (dodecyl dimethyl-ammonium bromide) (12-3-12) and anionic surfactant sodium dodecyl sulfate (SDS) mixed system has been investigated by measuring the fluorescence, zeta potential, UV-Vis spectrum, and circular dichroism. In the absence of SDS, owing to the electrostatic and hydrophobic interactions, 12-3-12 forms micelle-like structure on the DNA chain before the micellization in bulk phase. For the mixed system of 12-3-12 and SDS, the negative charges on SDS can compete against DNA to bind with cationic 12-3-12 because of the stronger interaction between oppositely charged surfactants, and thus, the catanionic mixed micelles are formed before the formation of DNA/12-3-12 complexes. Thereafter, the positive charges on the mixed micelles bind with DNA, and thus, the change of the zeta potential from negative to positive is distinctly different from the system without SDS. Meanwhile, the existence of SDS postpones the exclusion of ethidium bromide (EB) from DNA/EB complexes. The conformation of DNA undergoes a change from native B-form to chiral Ψ-phase as binding with 12-3-12 process. Upon adding SDS to the DNA/12-3-12 complex solution, however, DNA is released to the bulk and the Ψ-phase returns to B-form again.

  1. Surfactant-assisted sol gel preparation of high-surface area mesoporous TiO{sub 2} nanocrystalline Li-ion battery anodes

    Energy Technology Data Exchange (ETDEWEB)

    Casino, S. [GAME Lab, Department of Applied Science and Technology – DISAT, Institute of Chemistry, Politecnico di Torino, Duca degli Abruzzi 24, 10129 Torino (Italy); Di Lupo, F., E-mail: [GAME Lab, Department of Applied Science and Technology – DISAT, Institute of Chemistry, Politecnico di Torino, Duca degli Abruzzi 24, 10129 Torino (Italy); Francia, C. [GAME Lab, Department of Applied Science and Technology – DISAT, Institute of Chemistry, Politecnico di Torino, Duca degli Abruzzi 24, 10129 Torino (Italy); Tuel, A. [IRCELYON, Institut de Recherches sur la Catalyse et l’environnement de Lyon, UMR 5256, CNRS-Université de Lyon 1, 2 Avenue Albert Einstein, 69626 Villeurbanne Cedex (France); Bodoardo, S. [GAME Lab, Department of Applied Science and Technology – DISAT, Institute of Chemistry, Politecnico di Torino, Duca degli Abruzzi 24, 10129 Torino (Italy); Gerbaldi, C., E-mail: [GAME Lab, Department of Applied Science and Technology – DISAT, Institute of Chemistry, Politecnico di Torino, Duca degli Abruzzi 24, 10129 Torino (Italy)


    Highlights: • Mesoporous TiO{sub 2} nanocrystalline lithium battery anodes with tunable morphology. • Simple sol–gel technique using different cationic surfactants is adopted. • Textural/morphological characteristics define the electrochemical behaviour. • TiO{sub 2} anatase using C16TAB exhibits stable performance after 200 cycles. • It shows promising prospects as high-voltage safe Li-ion battery anode. - Abstract: We here investigate the physico-chemical/morphological characteristics and cycling behaviour of several kinds of nanocrystalline TiO{sub 2} Li-ion battery anodes selectively prepared through a simple sol–gel strategy based on a low-cost titanium oxysulfate precursor, by mediation of different cationic surfactants having different features (e.g., chain lengths, counter ion, etc.): i.e., cetyl-trimethylammonium bromide (CTAB), cetyl-trimethylammonium chloride (CTAC), benzalkonium chloride (BC) or octadecyl-trimethyl ammonium bromide (C{sub 18}TAB). X-ray diffraction profiles reveal single phase anatase having good correspondence with the reference pattern when using short chain CTAB, while in the other cases the presence of chloride and/or an increased chain length affect the purity of the samples. FESEM analysis reveal nanosized particles forming cauliflower-like aggregates. TiO{sub 2} materials demonstrate mesoporous characteristics and large specific surface area ranging from 250 to 30 m{sup 2} g{sup −1}. Remarkably stable electrode performance are achieved by appropriately selecting the cationic surfactant and the surfactant/precursor ratio. Detailed analysis is provided on the effect of the reaction conditions upon the formation of mesoporous crystalline titania enlightening new directions for the development of high performing lithium storage electrodes by a simple and low cost sol–gel strategy.

  2. The role of ionic surfactants on the solubilization of cyclohexenone compounds in aqueous media. (United States)

    Nisar, Jan; Khan, Muhammad Anas; Badshah, Amir; Ilyas, Mohammad; Khan, Gul Tiaz


    The solubilization and partitioning study of five newly synthesized organic compounds (Cyclohexenone Carboxylates) with ionic surfactants, sodium dodecylsulphate (SDS) and cetyltrimethylammonium bromide (CTAB) was studied using ultraviolet-visible absorption spectroscopy technique. The differential spectroscopic technique was employed to study the partition coefficient (K(x)) of organic molecules between bulk water phase and the miceller phase. The values of partitioning coefficient were in the range 29.714 × 10(3) to 5.46 × 10(6). The standard free energy of partitioning (ΔG(op)) was also determined, which was found out in the range of -25 to -38 kJ /mole and shows the stability of the system. The results show that the cyclohexenone carboxylate compounds have great interactions with CTAB as compared to SDS.

  3. Electromagnetophoretic migration velocity of organic microdroplets with surfactants using permanent magnets. (United States)

    Iiguni, Yoshinori; Ohtani, Hajime


    By using the electromagnetophoretic migration technique with permanent magnets, the electromagnetophoretic migration velocimetry in a droplet-based system was demonstrated for organic droplets dispersed in an aqueous solution. Migration of 2-fluorotoluene droplets with a diameter of 8 - 16 μm dispersed in 1.0 M KCl aqueous solution could be achieved in the same manner as for solid particles. The effect of cetyltrimethylammonium bromide (CTAB) on the electromagnetophoretic migration velocity of the droplets was also investigated. When the concentration of CTAB was in the range from 10(-6) to 10(-4) M, the electromagnetophoretic migration velocity of 2-fluorotoluene droplets decreased as the concentration of CTAB increased. With this measurement, we could successfully characterize organic droplets in terms of the amount of adsorbing surfactants by evaluating the surface conductivity of organic droplets calculated based on their electromagnetophoretic migration velocity.

  4. Synthesis and characterization of ordered hexagonal and cubic mesoporous tin oxides via mixed-surfactant templates route. (United States)

    Wang, Yude; Ma, Chunlai; Sun, Xiaodan; Li, Hengde


    Ordered hexagonal and cubic mesoporous tin oxides were synthesized for the first time in the presence of mixed cationic and neutral surfactants (a mixture of cetyltrimethylammonium bromide cationic surfactant and dodecylamine neutral surfactant) with different alkali and simple inorganic precursors at room temperature. In the synthesis systems, the dodecylamine neutral surfactant may function as a polar organic cosolvent and cosurfactant. The formation of the tin oxide mesostructured material was proposed to be due to the presence of hydrogen-bonding interactions between the supramolecular template and inorganic precursors Sn4+ and OH-, which were assumed to self-assemble around the cationic surfactant molecules. The materials are characterized by X-ray powder diffraction, transmission electron microscopy, thermogravimetric analysis, and N2 adsorption/desorption isotherm. The surface areas of materials evaluated from the N2 sorption isotherms are about 248 m(2)/g for hexagonal mesoporous tin oxide (SnH) and 281 m(2)/g for cubic mesoporous tin oxide (Sn-C) for calcination at 350 degrees C.

  5. Effect of surfactants on surface activity and rheological properties of type I collagen at air/water interface. (United States)

    Kezwoń, Aleksandra; Góral, Ilona; Frączyk, Tomasz; Wojciechowski, Kamil


    We describe the effect of three synthetic surfactants (anionic - sodium dodecyl sulfate (SDS), cationic - cetyltrimethylammonium bromide (CTAB) and nonionic - Triton X-100 (TX-100)) on surface properties of the type I calf skin collagen at the air/water interface in acidic solutions (pH 1.8). The protein concentration was fixed at 5×10(-6)molL(-1) and the surfactant concentration was varied in the range 5×10(-6)molL(-1)-1×10(-4)molL(-1), producing the protein/surfactant mixtures with molar ratios of 1:1, 1:2, 1:5, 1:10 and 1:20. An Axisymmetric Drop Shape Analysis (ADSA) method was used to determine the dynamic surface tension and surface dilatational moduli of the mixed adsorption layers. Two spectroscopic techniques: UV-vis spectroscopy and fluorimetry allowed us to determine the effect of the surfactants on the protein structure. The thermodynamic characteristic of the mixtures was studied using isothermal titration calorimetry (ITC) and differential scanning calorimetry (DSC). Modification of the collagen structure by SDS at low surfactant/protein ratios has a positive effect on the mixture's surface activity with only minor deterioration of the rheological properties of the adsorbed layers. The collagen/CTAB mixtures do not show that pronounced improvement in surface activity, while rheological properties are significantly deteriorated. The mixtures with non-ionic TX-100 do not show any synergistic effects in surface activity.

  6. Solubilization of octane in cationic surfactant-anionic polymer complexes: effect of polymer concentration and temperature. (United States)

    Zhang, Hui; Deng, Lingli; Zeeb, Benjamin; Weiss, Jochen


    Polymers may alter the ability of oppositely charged surfactant micelles to solubilize hydrophobic molecules depending on surfactant-polymer interactions. This study was conducted to investigate the effects of polymer concentration and temperature on the solubilization thermodynamics of an octane oil-in-water emulsion in mixtures of an anionic polymer (carboxymethyl cellulose) and cationic cetyltrimethylammonium bromide (CTAB) surfactant micelles using isothermal titration calorimetry (ITC). Results showed that the CTAB binding capacity of carboxymethyl cellulose increased with increasing temperature from 301 to 323 K, and correspondingly the thermodynamic behavior of octane solubilization in CTAB micelles, either in the absence or presence of polymer, was found to depend on temperature. The addition of carboxymethyl cellulose caused the solubilization in CTAB micelles to be less endothermic, and increased the solubilization capacity. Based on the phase separation model, the solubilization was suggested to be mainly driven by enthalpy gains. Results suggest that increasing concentrations of the anionic polymer gave rise to a larger Gibbs energy decrease and a larger unfavorable entropy increase for octane solubilization in cationic surfactant micelles.

  7. Investigation on stabilization of CO2 foam by ionic and nonionic surfactants in presence of different additives for application in enhanced oil recovery (United States)

    Kumar, Sunil; Mandal, Ajay


    Application of foam in upstream petroleum industry specifically in enhanced oil recovery (EOR) has gained significant interest in recent years. In view of this, an attempt has been paid to design the suitable foaming agents (foamer) by evaluating the influence of three surfactants, five nanoparticles and several additives. Experimental investigations have been carried out in order to examine the mechanism of foam generation in presence of sodium dodecyl sulfate (SDS), cetyltrimethylammonium bromide (CTAB) and polysorbate 80 (Tween 80) as anionic, cationic and nonionic surfactants by using the CO2 as gaseous component. It has been found that ionic surfactants show the higher foam life compared to nonionic surfactant. Out of different nano particles used, namely alumina (Al2O3) zirconium oxide (ZrO2), calcium carbonate (CaCO3), boron nitride (BN) and silica (SiO2), boron nitride shows the maximum improvement of foam stability. The foam stability of surfactant-nanoparticles foam is further increased by addition of different additives viz. polymer, alcohol and alkali. The results show that, the designed foaming solution have nearly 2.5 times higher half-decay time (t1/2) compared to the simple surfactant system. Finally, it has been found that gas injection rate plays an important role in obtaining a uniform and stabilized foam.


    Institute of Scientific and Technical Information of China (English)

    Zhen Tong; Chao-yang Wang; Bi-ye Ren; Xin-xing Liu; Fang Zeng


    Our recent studies concerning the binding of ionic surfactants on oppositely charged polyelectrolytes observed with fluorescence techniques are reviewed. The cationic surfactants cetyltrimethylammonium bromide (CTAB),dodecyltrimethylammonium chloride (DTAC), and nonionic surfactant octaethylene glycol monododecyl ether (C12E8) were allowed to bind on anionic poly(2-acrylamido-2-methylpropanesulfonic acid) (PAMPS) and its pyrene and/or naphthalene labeled copolymers. The relative excimer emission intensity IE/IM of a cationic probe 1-pyrenemethylamine hydrochloride were chosen to monitor the binding process and the conformation change of surfactant-bound polyelectrolytes. The 1:1aggregation of polyelectrolyte-CTAB with respect to the charge was found as long as the CTAB concentration was slightly higher than its critical aggregation concentration (CAC). The intermolecular NRET indicated that the CTAB-bound polyelectrolytes aggregated together through the hydrophobic interaction between the CTAB tails. However, neither 1:1polyelectrolyte-DTAC aggregation nor intermolecular aggregation of DTAC-bound polyelectrolyte was observed owing to its weaker hydrophobicity of 12 carbon atoms in the tail, which is shorter than that of CTAB. As known from the fluorescence results, nonionic surfactant C12E8 did not bind on the anionic polyelectrolytes, but the presence of PAMPS promoted the micelle formation for C12E8 at the CAC slightly below its critical micelle concentration (CMC). The solid complex of dansyl labeled AMPS copolymer-surfactant exhibited a decrease in local polarity with increasing charge density of the polyelectrolyte or with alkane tail length of the surfactant. SAXS suggested a lamella structure for the AMPS copolymersurfactant solid complexes with a long period of 3.87 nm for CTAB and 3.04 nm for DTAC, respectively.

  9. Determination of the Critical Micelle Concentration of Cationic Surfactants: An Undergraduate Experiment (United States)

    Huang, Xirong; Yang, Jinghe; Zhang, Wenjuan; Zhang, Zhenyu; An, Zesheng


    A novel method based on the catalytic effect of micelles exerted by cetyltrimethylammonium bromide (CTAB) and cetylpyridinium bromide (CPB), respectively, on the indicator reaction between H2O2 and bromopyrogallol red (BPR), a triphenylmethane dye, was developed for undergraduates to determine the critical micelle concentration (cmc) of CTAB and CPB. The indicator reaction was monitored by a fixed-time kinetic-spectrophotometric technique. Under the experimental conditions the cmc values of CTAB and CPB were (4.8 ± 0.3) x 10-4 mol/L and (4.5 ± 0.3) x 10-4mol/L, which were close to the literature values of 9.2 x 10-4 mol/L and 9.0 x 10-4 mol/L, respectively. Detailed discussion on the selection of experimental conditions was made to minimize the effect of electrolytes on the cmc's of surfactants and to maintain the high accuracy of the experimental data. As an undergraduate physicochemical laboratory experiment the present method had several attractive features. The procedure is simple and easy to perform, does not require special equipment, and does not need expensive or toxic reagents. In addition, it is a versatile method that can be applied to a wide variety of both anionic and cationic surfactants.

  10. 锡(Ⅳ)-磺基水杨酸-溴邻苯三酚红-溴化十六烷基 三甲基 铵胶束混配络合物的显色反应%The Colour Reaction of Micellar Mixed Ligand Complex of Tin(Ⅳ)-Sulfosalicylic Acid-Bromopyrogallol Red-Cetyltrimethylammonium Bromide

    Institute of Scientific and Technical Information of China (English)

    罗宗铭; 陈凯瑞; 杨雪娇


    在pH 1.6的氯乙酸缓冲介质中,溴化十六烷基三甲基铵存在下,Sn(Ⅳ)与溴邻苯三酚红及磺 基水杨酸形成(1+2+1)的胶束混配络合物。络合物的最大吸收波长为540nm,表观摩尔吸光系 数为8.9×104L*mol-1*cm-1。Sn(Ⅳ)浓度在0—0.6mg/L范围内符合比耳定律。方法的选择性及稳定性都比无磺基水杨酸时好,适用于罐头盒中微量锡的测定,结果令 人满意。%In the presence of pH=1.6 chloroacetic acid buffer solution and cetyltrimethylam monium bromide medium,tin(Ⅳ) forms a micellar mixed ligand complex with bromopy rogallol red(BPR) and sulfosalicylic acid(SSal).The composition of tin(Ⅳ),BPR and SSal micellar mixed ligand complex was determined to be 1∶2∶1.The maximum absorption of the complex is at 540nm and the apparent molar absorptivity is 8. 9×104 L*mol-1*cm-1.Beer's law is obeyed in the range of 0—0.6 mg/L for tin(Ⅳ).The selectivity and stability of this method is higher than that of in the absence of sulfosalicylic acid.The method has been applied to determ ine trace tin(Ⅳ) in tinned food with satisfactory results.

  11. Influence of surfactant structures in luminescence enhancement dynamics during nucleation and growth of aqueous ZnS nanoparticles and their photoactivation due to illumination with UV/visible light

    Energy Technology Data Exchange (ETDEWEB)

    Mehta, S.K., E-mail: [Department of Chemistry and Centre for Advanced Studies in Chemistry, Panjab University, Chandigarh 160 014 (India); Kumar, Sanjay [Department of Chemistry and Centre for Advanced Studies in Chemistry, Panjab University, Chandigarh 160 014 (India)


    Nanostructured semiconductor architectures have attractive optical properties mainly including bright photoluminescence (PL) resulting from the radiative recombination of charge carriers on surface states. Various approaches have been employed for the modification of surface states of these nanostructures to design new nanomaterials with enhanced PL primarily in aqueous medium to enable their applications in biological samples. Here, we report the varying efficiencies of three commercial surfactants viz. cetyltrimethylammonium bromide (CTAB), cetyltrimethylammonium chloride (CTAC) and cetylpyridinium chloride (CPyC) on the dynamics of PL emission enhancement during initial growth and Ostwald ripening of ZnS nanoparticles (NPs). The counterion has been estimated to behave differently to govern the PL enhancement. The exceptionally high tendency of CPyC in PL enhancement has been assigned to participation of {pi}-electrons of pyridinium ring. The impact of UV-light in photoactivation of surfactant stabilized ZnS NPs has been utilized in exploring significance of surfactants in improving the surface emitting states in water soluble semiconductor NPs.

  12. Crystalline fibrillar gel formation in aqueous surfactant-antioxidant system. (United States)

    Joseph, Linet Rose; Tata, B V R; Sreejith, Lisa


    Cetyltrimethylammonium bromide (CTAB) is a well-known cationic surfactant capable to micellize into diverse morphologies in aqueous medium. We observed the formation of an opaque gel state from aqueous CTAB solution in the presence of the aromatic additive, para-coumaric acid (PCA). Optical microscopic images revealed the presence of large fibrils in the system at room temperature. Gel nature of the fibrils was confirmed by rheological measurements. Presence of interstitial water in the fibrils was recognized with Raman spectroscopy. On heating the sample above 30 (°) C, the fibrillar gel state changes to a transparent liquid state with Newtonian flow properties. Dynamic light scattering study hinted the presence of small micelles in the solution above 30 (°) C. Thus the system showed a temperature-dependent structural transition from opaque water-swollen gel to transparent micellar liquid. The formation of water-swollen fibrillar network is attributed to surfactant-additive intermolecular interactions in aqueous medium. Transition to micelle phase above 30 (°) C is related to Kraft transition which is observed at significantly lower temperature for CTAB in the absence of PCA. The structural features of PCA play a key role in promoting fibrillar network formation and elevating the Kraft transition in aqueous solution of CTAB.

  13. A fundamental investigation of the surfactant-stabilized single-walled carbon nanotube/epoxy resin suspensions by molecular dynamics simulation (United States)

    Rahmani, Farzin; Nouranian, Sasan; Mahdavi, Mina; O’Haver, John H.


    The surfactant-assisted stabilization of single-walled carbon nanotubes (SWCNTs) in SWCNT/epoxy resin suspensions were investigated for different surfactant types, concentrations, and temperatures using molecular dynamics simulation. One cationic surfactant, i.e. cetyltrimethylammonium bromide (CTAB), and three anionic surfactants, i.e. sodium dodecyl sulfate (SDS), sodium dodecylbenzenesulfonate (NaDDBS), and sodium cholate (SC), as well as a 1:1 mixture of CTAB and SDS were used. Potentials of mean force (PMFs) were generated between two fixed-size (6,6) SWCNTs for all neat (no surfactant) and surfactant-loaded SWCNT/epoxy resin systems at three different surfactant concentrations (0.25, 0.50, and 1.00 wt%) at room (298 K) and elevated temperature (398 K, only for low-surfactant-concentration systems). Overall, two distinct mechanisms of SWCNT stabilization by the surfactants were identified: (1) an increase in the SWCNT aggregation energy barrier due to the wrapping of the SWCNTs by the surfactant molecules, and (2) a constantly positive free energy (repulsion) for all SWCNT separation distances due to the encapsulation of the two approaching SWCNTs. With the second mechanism, there is a delay for the epoxy molecules to be pushed out from the space between the two SWCNTs. With an increase in the surfactant concentration, the first mechanism becomes more prevalent. With an increase in temperature to 398 K, all surfactants migrate to the suspending medium, thereby the second mechanism of SWCNT stabilization dominates. A drop in the SWCNT-surfactant binding energy is observed around 360–370 K, signifying the surfactant migration to the suspending medium. More or less, all surfactants stabilize the SWCNTs in an epoxy resin at one or more surfactant concentrations. However, NaDDBS exhibits a higher SWCNT aggregation barrier at high concentrations and both temperatures (298 K and 398 K), thereby providing a better SWCNT stabilization in the epoxy resin

  14. Effect of Surfactants and Manufacturing Methods on the Electrical and Thermal Conductivity of Carbon Nanotube/Silicone Composites

    Directory of Open Access Journals (Sweden)

    Martina Hřibová


    Full Text Available The effect of ionic surfactants and manufacturing methods on the separation and distribution of multi-wall carbon nanotubes (CNTs in a silicone matrix are investigated. The CNTs are dispersed in an aqueous solution of the anionic surfactant dodecylbenzene sulfonic acid (DBSA, the cationic surfactant cetyltrimethylammonium bromide (CTAB, and in a DBSA/CTAB surfactant mixture. Four types of CNT-based composites of various concentrations from 0 to 6 vol.% are prepared by simple mechanical mixing and sonication. The morphology, electrical and thermal conductivity of the CNT-based composites are analyzed. The incorporation of both neat and modified CNTs leads to an increase in electrical and thermal conductivity. The dependence of DC conductivity versus CNT concentration shows percolation behaviour with a percolation threshold of about 2 vol.% in composites with neat CNT. The modification of CNTs by DBSA increases the percolation threshold to 4 vol.% due to the isolation/separation of individual CNTs. This, in turn, results in a significant decrease in the complex permittivity of CNT–DBSA-based composites. In contrast to the percolation behaviour of DC conductivity, the concentration dependence of thermal conductivity exhibits a linear dependence, the thermal conductivity of composites with modified CNTs being lower than that of composites with neat CNTs. All these results provide evidence that the modification of CNTs by DBSA followed by sonication allows one to produce composites with high homogeneity.

  15. Removal of para-nitrochlorobenzene from aqueous solution on surfactant-modified nanoscale zero-valent iron/graphene nanocomposites. (United States)

    Wu, Yan; Luo, Hanjin; Wang, Hou


    This study demonstrated a remarkably simple and efficient method for the synthesis of nanoscale zero-valent iron (NZVI)/graphene (GN) nanocomposites. In order to prevent the agglomeration and restack of nanocomposites, chemical functionalization of nanocomposites with cetyltrimethylammonium bromide was proposed. The adsorption performance of surfactant-modified NZVI/GN nanocomposites was evaluated for the removal of para-nitrochlorobenzene (p-NCB) from aqueous solutions. The characteristics of nanocomposites were characterized by X-ray diffraction, BET surface area, Fourier transform infrared spectrum, thermogravimetric analysis and scanning electron microscopy. The effect factors including initial solution pH, contact time, reaction temperature, dosage, initial concentration of humic acid (HA) on the adsorption property of p-NCB onto surfactant-modified nanocomposites were investigated. The adsorption kinetics fitted well with pseudo-second-order model. The adsorption capacity of p-NCB on surfactant-modified nanocomposites inferred from the Langmuir model was 105.15 mg/g at 293 K. The thermodynamic parameters indicated that the adsorption of p-NCB onto surfactant-modified nanocomposites was an exothermic and spontaneous process. HA had a strong suppression effect on p-NCB uptake in the adsorption experiment.

  16. Effects of Surfactants on the Performance of CeO2 Humidity Sensor

    Directory of Open Access Journals (Sweden)

    Chunjie Wang


    Full Text Available Nanosized CeO2 powders were synthesized via hydrothermal method with different types of surfactants (polyethylene glycol (PEG, cetyltrimethylammonium bromide (CTAB, and sodium dodecylbenzenesulfonate (SDBS. X-ray diffraction, Raman spectroscopy, and transmission electron microscopy were utilized to characterize the phase structures and morphologies of the products. The sample with CTAB as surfactant (CeO2-C has the largest specific surface area and the smallest particle size among these three samples. The humidity sensor fabricated by CeO2-C shows higher performance than those used CeO2-P and CeO2-S. The impedance of the CeO2-C sensor decreases by about five orders of magnitude with relative humidity (RH changing from 15.7 to 95%. The response and recovery time are 7 and 7 s, respectively. These results indicate that the performance of CeO2 humidity sensors can be improved effectively by the addition of cationic surfactant.

  17. Thermodynamic Study of the Ion-Pair Complexation Equilibria of Dye and Surfactant by Spectral Titration and Chemometric Analysis

    Directory of Open Access Journals (Sweden)

    Hakimeh Abbasi Awal


    Full Text Available Surfactant-dye interactions are very important in chemical and dyeing processes. The dyes interact strongly with surfactant and show new spectrophotometric properties, so the UV-vis absorption spectrophotometric method has been used to study this process and extract some thermodynamic parameters. In this work, the association equilibrium between ionic dyes and ionic surfactant were studied by analyzing spectrophotometric data using chemometric methods. Methyl orange and crystal violet were selected as a model of cationic and anionic dyes respectively. Also sodium dodecyl sulphate and cetyltrimethylammonium bromide were selected as anionic and cationic surfactant, respectively. Hard model methods such as target transform fitting (TTF classical multi-wavelength fitting and soft model method such as multivariate curve resolution (MCR were used to analyze data that were recorded as a function of surfactant concentration in premicellar and postmicellar regions. Hard model methods were used to resolve data using ion-pair model in premicellar region in order to extract the concentration and spectral profiles of individual components and also related thermodynamic parameters. The equilibrium constants and other thermodynamic parameters of interaction of dyes with surfactants were determined by studying the dependence of their absorption spectra on the temperature in the range 293–308 K at concentrations of 5 × 10−6 M and 8 × 10−6 M for dye crystal violet and methyl orange, respectively. In postmicellar region, the MCR-ALS method was applied for resolving data and getting the spectra and concentration profiles in complex mixtures of dyes and surfactants.

  18. Aclidinium Bromide

    DEFF Research Database (Denmark)

    Ulrik, Charlotte Suppli


    Long-acting bronchodilators are the mainstay of pharmacological treatment for patients with chronic obstructive pulmonary disease (COPD). The aim of this review is to provide an overview of the clinical studies evaluating the safety and efficacy of inhaled aclidinium bromide, a novel long...

  19. Interaction Study and Reactivity of Zr(IV) -Substituted Wells-Dawson Polyoxometalate towards Hydrolysis of Peptide Bonds in Surfactant Solutions. (United States)

    Quanten, Thomas; Shestakova, Pavletta; Van Den Bulck, Dries; Kirschhock, Christine; Parac-Vogt, Tatjana N


    The interaction between the 1:2 Zr(IV) :Wells-Dawson complex, K15 H[Zr(α2 -P2 W17 O61 )2] (1), and a range of surfactants was studied in detail with the aim of developing metal-substituted POMs as potential artificial proteases for membrane proteins. The surfactants include the positively charged cetyl(trimethyl)ammonium bromide (CTAB), the negatively charged sodium dodecyl sulfate (SDS), the neutral Triton X-100 (TX-100), and zwitterionic 3-[dodecyl(dimethyl)ammonio]-1-propanesulfonate (Zw3-13) and 3-[dimethyl(3-{[(3α,5β,7α,12α)-3,7,12-trihydroxy-24-oxocholan-24-yl]amino}propyl)ammonio]-1-propanesulfonate (CHAPS). A combination of multinuclear (1)H, (13)C, and (31) P NMR spectroscopy, (1)H diffusion-ordered NMR spectroscopy ((1)H DOSY), and nuclear Overhauser effect spectroscopy (NOESY) was used to examine the interaction between 1 and each surfactant on the molecular level. Cationic surfactant CTAB caused precipitation of 1 due to strong electrostatic interactions, while the anionic SDS and neutral TX-100 surfactants did not exhibit any interaction at neutral pD. (1)H DOSY NMR spectroscopy indicated an interaction between 1 and zwitterionic surfactants Zw3-12 and CHAPS, which occurs via the positively charged ammonium group in the surfactant molecule. In the presence of anionic, neutral, and zwitterionic surfactants, 1 preserves its catalytic activity towards the hydrolysis of the peptide bond in the dipeptide glycyl-l-histidine (GH). The fastest hydrolysis was observed at pD 7.0 and could be rationalized by taking into account pD-dependent speciation of 1 and coordination properties of GH.

  20. Interactions of Ovalbumin with Ionic Surfactants

    Institute of Scientific and Technical Information of China (English)

    GUO Xia; YAN Hui; GUO Rong


    The interactions of ovalbumin (OVA) with one anionic surfactant,sodium dodecyl sulfate (SDS),and two cationic surfactants,dodecyl trimethylammonium bromide (DTAB) and cetyl trimethylammonium bromide (CTAB),in water have been studied through fluorescence and UV-Vis spectroscopies and transmission electronic microscopy,combined with the measurement of conductivity.OVA can increase the critical micelle concentrations (cmc) of SDS and CTAB but has little effect on that of DTAB.The interaction between surfactant monomer and OVA is greater than that between surfactant micelles and OVA.Moreover,SDS can make OVA unfolded while cationic surfactants cannot.

  1. One-dimensional porphyrin nanoassemblies assisted via graphene oxide: sheetlike functional surfactant and enhanced photocatalytic behaviors. (United States)

    Guo, Peipei; Chen, Penglei; Liu, Minghua


    Surfactant-assisted self-assembly (SAS) has received much attention for supramolecular nanoassemblies, due to its simplicity and easiness in realizing a controllable assembly. However, in most of the existing SAS protocols, the employed surfactants work only as a regulator for a controllable assembly but not as active species for function improvement. In this paper, we report that a porphyrin, zinc 5,10,15,20-tetra(4-pyridyl)-21H,23H-porphine (ZnTPyP), could be assembled to form one-dimensional (1D) supramolecular nanostructures via a SAS method, wherein graphene oxide (GO) plays a fascinating role of sheetlike surfactant. We show that, when a chloroform or tetrahydrofuran solution of ZnTPyP is injected into an aqueous dispersion of GO, 1D supramolecular nanoassemblies of ZnTPyP with well-defined internal structures could be easily formulated in a controllable manner. Our experimental facts disclose that the complexation of ZnTPyP with the two-dimensional GO nanosheets plays an important role in this new type of SAS. More interestingly, compared with the 1D ZnTPyP nanoassemblies formulated via a conventional SAS, wherein cetyltrimethylammonium bromide is used as surfactant, those constructed via our GO-assisted SAS display distinctly enhanced photocatalytic activity for the photodegradation of rhodamine B under visible-light irradiation. Our new findings suggest that GO could work not only as an emergent sheetlike surfactant for SAS in terms of supramolecular nanoassembly but also as functional components during the performance of the assembled nanostructures.


    NARCIS (Netherlands)

    Blandamer, M.J; Briggs, B.; Cullis, P.M.; Engberts, J.B.F.N.; Kacperska, A.


    Interactions of both cationic and anionic surfactants with vesicles formed by dimethyldioctadecylammonium bromide (DOAB) and by sodium didodecylphosphate (DDP) have been probed using differential scanning microcalorimetry. The scans show that the surfactants are incorporated into the vesicle bilayer

  3. Vesicle-Surfactant Interactions : Effects of Added Surfactants on the Gel to Liquid-crystal Transition for Two Vesicular Systems

    NARCIS (Netherlands)

    Blandamer, Michael J.; Briggs, Barbara; Cullis, Paul M.; Engberts, Jan B.F.N.; Kacperska, Anna


    Interactions of both cationic and anionic surfactants with vesicles formed by dimethyldioctadecylammonium bromide (DOAB) and by sodium didodecylphosphate (DDP) have been probed using differential scanning microcalorimetry. The scans show that the surfactants are incorporated into the vesicle bilayer

  4. Characterisation of thin films of graphene–surfactant composites produced through a novel semi-automated method

    Directory of Open Access Journals (Sweden)

    Nik J. Walch


    Full Text Available In this paper we detail a novel semi-automated method for the production of graphene by sonochemical exfoliation of graphite in the presence of ionic surfactants, e.g., sodium dodecyl sulfate (SDS and cetyltrimethylammonium bromide (CTAB. The formation of individual graphene flakes was confirmed by Raman spectroscopy, while the interaction of graphene with surfactants was proven by NMR spectroscopy. The resulting graphene–surfactant composite material formed a stable suspension in water and some organic solvents, such as chloroform. Graphene thin films were then produced using Langmuir–Blodgett (LB or electrostatic layer-by-layer (LbL deposition techniques. The composition and morphology of the films produced was studied with SEM/EDX and AFM. The best results in terms of adhesion and surface coverage were achieved using LbL deposition of graphene(−SDS alternated with polyethyleneimine (PEI. The optical study of graphene thin films deposited on different substrates was carried out using UV–vis absorption spectroscopy and spectroscopic ellipsometry. A particular focus was on studying graphene layers deposited on gold-coated glass using a method of total internal reflection ellipsometry (TIRE which revealed the enhancement of the surface plasmon resonance in thin gold films by depositing graphene layers.

  5. Zinc silicates with tunable morphology by surfactant assisted sonochemical route suitable for NUV excitable white light emitting diodes. (United States)

    Basavaraj, R B; Nagabhushana, H; Daruka Prasad, B; Vijayakumar, G R


    The cationic surfactants assisted ultrasound route was used to prepare Dy(3+) doped Zn2SiO4 nanophosphors. The final products were characterized by powder X-ray diffraction (PXRD), ultraviolet visible spectroscopy, scanning electron microscopy, transmission electron microscopy and photoluminescence. Orthorhombic phase of Zn2SiO4:Dy(3+) (JCPDS card No. 35-1485) was confirmed from PXRD. It was evident that the morphology of spherical and broom like structures were obtained with epigallocatechin gallate (EGCG) and cetyltrimethylammonium bromide (CTAB) surfactants respectively. Further the size and agglomeration of the products were varied with surfactants concentration, sonication time, pH and sonication power. The probable formation mechanisms to obtain various micro/nano superstructures were discussed. The characteristic PL peaks were observed at 484, 574 and 666nm due to the electronic transitions (4)F9/2→(6)Hj (j=15/2, 13/2, 11/2) of Dy(3+) ions upon excited at NUV pumping wavelength of 350nm [(6)H15/2→(6)P7/2 ((4)M15/2)]. The Judd-Ofelt intensity parameters and radiative properties were estimated by using PL emission data. The photometric studies indicated that the obtained phosphors could be promising materials in white light emitting diodes (wLED's). The present synthesis route was rapid, environmentally benign, cost-effective and useful for industrial applications such as solid state lighting and display devices.

  6. Study of the micellization and micellar growth in pure alkanediyl-alpha-omega-bis(dodecyldimethylammonium) bromide and MEGA10 surfactant solutions and their mixtures. Influence of the spacer on the enthalpy change accompanying sphere-to-rod transitions. (United States)

    Martín, Victoria Isabel; Rodríguez, Amalia; Graciani, María del Mar; Robina, Inmaculada; Moyá, María Luisa


    The micellization and micellar growth in pure aqueous alkanediyl-alpha-omega-bis(dodecyldimethylammonium) bromide, 12-s-12,2Br(-) (with s = 2,5,6,8,10,12), and N-decanoyl-N-methylglucamide MEGA10 solutions and their mixtures are investigated at 303 K. Application of different theoretical approaches to the binary mixtures shows a nonideal behavior. It also shows that the spacer length does not play an important role in the attractive interactions shown by the mixed systems. The sphere-to-rod morphological transition in the pure dimeric micellar solutions is studied at 303 K. From comparison of these results with those at 298 K the key role played by the spacer in the micellar growth is shown. The spacer length controls not only the surfactant concentration at which the morphological transition happens but also the sign of the enthalpy change accompanying the sphere-to-rod equilibrium. Spacers with an even number of methylenes show smaller C* values than those with an odd number of -CH(2)- units. An endothermic enthalpy change is found for even spacers whereas an exothermic enthalpy change is found for odd spacers. To the authors knowledge, this is the first time this experimental trend has been shown. Addition of MEGA10 diminishes the tendency of the aggregates to grow. An increment in the solution mole fraction of MEGA10 makes the formation of elongated micelles difficult. Microviscosity measurements provide additional information about the influence of the MEGA10 content on the sphere-to-rod transition.

  7. Using a Combination of Experimental and Mathematical Method to Explore Critical Micelle Concentration of a Cationic Surfactant (United States)

    Goronja, Jelena; Pejic´, Natas?a; Lez?aic´, Aleksandra Janos?evic´; Stanisavljev, Dragomir; Malenovic, Andelija


    An undergraduate electrical conductivity measurement experiment in a physical chemistry lab and basic fitting procedures are presented that allow a characterization of micellar system of hexadecyltrimethylammonium bromide (cetyltrimethylammonium bromide, CTAB) in binary mixture of water and acetonitrile (ACN) as a cosolvent (10%, v/v) at 30.0 °C.…

  8. Faster photodegradation rate and higher dioxin yield of triclosan induced by cationic surfactant CTAB. (United States)

    Qiao, Xianliang; Zheng, Xiaodong; Xie, Qing; Yang, Xianhai; Xiao, Jie; Xue, Weifeng; Chen, Jingwen


    Triclosan has received extensive attention as it has been frequently detected in the aquatic environment. Photolysis was found to be a major pathway governing the fate of triclosan in the aquatic environment. However, the effects of surfactants that usually coexist with triclosan, on the photodegradation of triclosan, are largely unknown. In this study, the effects of selected surfactants on the photodegradation of triclosan were investigated experimentally. The results show that anionic sodium dodecyl benzene sulfonate, sodium dodecyl sulfate and neutral polyoxyethylene (20) sorbitan monooleate inhibit the photolysis of triclosan, whereas cationic cetyltrimethylammonium bromide (CTAB) significantly accelerates the photodegradation rate of triclosan. The interactions between the hydrophilic group of CTAB and anionic triclosan lead to the apparent decrease of pKa of triclosan from 8.4 to 6.1, which increase the fraction of anionic triclosan from 4% to 89% in neutral solution. A red shift in the UV-VIS absorption spectrum is exhibited, thus leading to the increased photodegradation rate of triclosan. The accelerations caused by CTAB were observed under xenon lamp and Hg lamp irradiances, as well as under natural sunlight. Effect of CTAB demonstrated pH dependence with significantly enhancement under pH 5∼9 and inhibition at pH=3. The presence of CTAB also increased the yield of 2,8-dichlorodibenzo-p-dioxin from the photolysis of triclosan about 7 times at pH=7.

  9. Silver nanocombs and branched nanowires formation in aqueous binary surfactants solution

    Energy Technology Data Exchange (ETDEWEB)

    Umar, Akrajas Ali, E-mail: [Universiti Kebangsaan Malaysia, Institute of Microengineering and Nanoelectronics (Malaysia); Oyama, Munetaka [Kyoto University, Department of Materials Chemistry, Graduate School of Engineering (Japan); Salleh, Muhamad Mat; Majlis, Burhanuddin Yeop [Universiti Kebangsaan Malaysia, Institute of Microengineering and Nanoelectronics (Malaysia)


    Branched nanocrystals, particularly nanocombs, are a unique 1D-morphology that is normally formed in polytypic materials, such as ZnO, and rarely occurs in the highly symmetric fcc metallic system. Here, we report the chemical synthesis of nanocombs of a highly symmetrical fcc silver system that is realized by reducing the silver ions in the presence of a mixture of silver nanoseeds and binary surfactants, namely cetyltrimethylammonium bromide (CTAB) and hexamethylenetetramine (hexamine or HMT), under an alkaline condition. The silver nanocombs feature a high-degree branching orientation toward a single direction with good branch-to-branch spacing. The nanocombs formation was very sensitive to the concentrations of CTAB, HMT and NaOH in the reaction in which, in a typical case, nanocombs or curly nanowires were produced by controlling the concentration of these chemicals in the reaction. We hypothesized that the branching could be due to: (i) a kind of polytypism in such highly symmetrical fcc nanocrystals that was enabled by a selective surfactant adhesion process on the growing crystalline plane and (ii) lattice defects or twinning induced growth redirection in the nanocrystals. The silver nanocombs might generate a peculiar characteristic that is probably superior to those produced by other morphologies, such as nanorods, nanowires, and so on. Thus, it should find extensive use in the currently existing applications.

  10. Preparatory of X zeolite (faujasite) with surfactant hexa decyl trimethyl ammonium bromide (HMDTA) for adsorption of organic compounds; Acondicionamiento de zeolita X (faujasita) con surfactante bromuro de hexa decil trimetil amonio (HDTMA) para adsorcion de compuestos organicos

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez R, V


    The water represents one of the most valuable natural resources for the alive beings, since it is the essential component of the alive matter. Also, it is fundamental part of our planet, since is an indispensable element for the integral development of the same one. The demographic growth, the human being's activities and the industrial growth, he/she brings as consequence an increase in the use of the water and the generation of residual waters that successively contaminate the hydrological basins, becoming an environmental problem urgent. The contamination of the water with compound such as phenol and benzene, it is a problem that it requires the search of solutions, since it is of compound not very biodegradable, able to accumulate through the food chains and very toxic to the alive beings that they enter in contact with them (Tolgyessy, 1993). In the human beings it can take place damages in liver and kidney, the Agency of Protection to the Atmosphere of the United States (EPA) it considers that the exhibition for benzene is related with the leukemia, it is also considered as a carcinogen substance. Of the methods that are used for the treatment of polluted waters, it highlights the use of adsorber and one of them is the zeolites, since they are broadly used in those separation processes. The zeolites is crystalline aluminosilicates, they are characterized for to have a big superficial area and for their great capacity of exchange cationic, due to it the process of adsorption depends on these two characteristics, since to the modified being superficially for surfactants cationic it originates an enriched layer of carbon organic, which has the capacity to remove pollutants of the water. The present work outlines as objective to carry out the superficial modification of zeolite X using hexa decyl trimethyl ammonium bromide (HMDTA-Br) to different concentrations, with the purpose of making it useful in the removal of pollutants organic, present in watery

  11. Structural organization of cetyltrimethylammonium sulfate in aqueous solution: The effect of Na2SO4. (United States)

    Feitosa, Eloi; Brazolin, Marcelo Rodrigo Savério; Naal, Rose Mary Zumstein Georgetto; Del Lama, Maria Perpétua Freire de Morais; Lopes, Josias R; Loh, Watson; Vasilescu, Marilena


    We used dynamic light scattering (DLS), steady-state fluorescence, time resolved fluorescence quenching (TRFQ), tensiometry, conductimetry, and isothermal titration calorimetry (ITC) to investigate the self-assembly of the cationic surfactant cetyltrimethylammonium sulfate (CTAS) in aqueous solution, which has SO(2-)4 as divalent counterion. We obtained the critical micelle concentration (cmc), aggregation number (N(agg)), area per monomer (a0), hydrodynamic radius (R(H)), and degree of counterion dissociation (alpha) of CTAS micelles in the absence and presence of up to 1 M Na2SO4 and at temperatures of 25 and 40 degrees C. Between 0.01 and 0.3 M salt the hydrodynamic radius of CTAS micelle R(H) approximately 16 A is roughly independent on Na2SO4 concentration; below and above this concentration range R(H) increases steeply with the salt concentration, indicating micelle structure transition, from spherical to rod-like structures. R(H) increases only slightly as temperature increases from 25 to 40 degrees C, and the cmc decreases initially very steeply with Na2SO4 concentration up to about 10 mM, and thereafter it is constant. The area per surfactant at the water/air interface, a0, initially increases steeply with Na2SO4 concentration, and then decreases above ca. 10 mM. Conductimetry gives alpha = 0.18 for the degree of counterion dissociation, and N(agg) obtained by fluorescence methods increases with surfactant concentration but it is roughly independent of up to 80 mM salt. The ITC data yield cmc of 0.22 mM in water, and the calculated enthalpy change of micelle formation, Delta H(mic) = 3.8 kJ mol(-1), Gibbs free energy of micellization of surfactant molecules, Delta G(mic) = -38.0 kJ mol(-1) and entropy TDelta S(mic) = 41.7 kJ mol(-1) indicate that the formation of CTAS micelles is entropy-driven.

  12. Effect of presence of benzene ring in surfactant hydrophobic chain on the transformation towards one dimensional aggregate

    Directory of Open Access Journals (Sweden)

    Rabah A. Khalil


    Full Text Available The formation of wormlike micelle and the following significant changes in rheological properties suffer misunderstanding from both theoretical and fundamental aspects. Recently, we have introduced a theory for interpreting such important phenomenon which is referred to as critical intermolecular forces (CIF. The theory has stated that the hydrophobic effect is the main factor for the formation of worm-like aggregates. Therefore, it seems interesting to check out the validity of this new physical insight through investigating the presence of benzene ring as less hydrophobic group in contrast to that of alkyl in surfactant tail. The mixture of anionic sodium dodecylbenzenesulphonate (SDBS and cationic cetyltrimethylammonium bromide (CTAB shows a high dynamic viscosity peak at the ratio of 80/20 of 3 wt.% CTAB/SDBS indicating the formation of wormlike micelles. The thermodynamic properties have been evaluated for this mixture exhibiting good agreement with the rheological changes. Interestingly, the results show the presence of benzene ring (in SDBS causing a negative effect towards the formation of one dimensional aggregate in contrast to previous results which support the proposed CIF theory. The presence of nonionic surfactant TritonX-100 in binary and ternary systems of SDBS and CTAB prohibits the formation of wormlike micelles.

  13. Interactions of Proline in Non-aqueous Anionic, Cationic and Nonionic Surfactants at Different Temperatures%不同温度下脯氨酸在非水阴离子、阳离子及非离子型表面活性剂中的作用

    Institute of Scientific and Technical Information of China (English)



    Density and viscosity data of proline (Pro) in sodium dodecyl sulfate/cetyltrimethylammonium bromide/poly (oxyethylene) isooctyl phenyl ether in formamide were measured at 298.15, 303.15, 308.15, and 313.15K and 0.1MPa. The density data were utilized to evaluate standard partial molar volumes (φ0V) and partial molar isobaric expansibility (φ0E). The viscosity data were used to evaluate A-and B-coefficients, free energy of activation of viscous flow (⊿μ0*1) and (⊿μ0*2), per mole of solvent and solute respectively, enthalpy (⊿H*) and entropy (⊿S*) of activation of viscous flow. The results obtained were utilized in the qualitative elucidation of the Pro-surfactant/formamide and Pro-Pro interactions in the present systems.

  14. Molecular recognition of genomic DNA in a condensate with a model surfactant for potential gene-delivery applications. (United States)

    Singh, Priya; Choudhury, Susobhan; Chandra, Goutam Kumar; Lemmens, Peter; Pal, Samir Kumar


    The functionality of a gene carrying nucleic acid in an artificial gene-delivery system is important for the overall efficiency of the vehicle in vivo. Here, we have studied a well-known artificial gene-delivery system, which is a condensate of calf thymus DNA (CT-DNA) with a model cationic surfactant cetyltrimethylammonium bromide (CTAB) to investigate the molecular recognition of the genomic DNA in the condensate. While dynamic light scattering (DLS) and circular dichroism (CD) reveal structural aspects of the condensate and the constituting DNA respectively, picosecond resolved polarization gated spectroscopy and Förster resonance energy transfer (FRET) reveal molecular recognition of the genomic DNA in the condensate. We have considered ethidium bromide (EB) and crystal violet (CV), which are well known DNA-binding agents through intercalative (specific) and electrostatic (non-specific) interactions, respectively, as model ligands for the molecular recognition studies. A fluorescent cationic surfactant, Nonyl Acridine Orange (NAO) is considered to be a mimic of CTAB in the condensate. The polarization gated fluorescence of NAO at various temperatures has been used to investigate the local microviscosity of the condensate. The excellent spectral overlap of NAO emission and the absorption spectra of both EB and CV allow us to investigate FRET-distances of the ligands with respect to NAO in the condensate at various temperatures and thermal stability of ligand-binding of the genomic DNA. The thermodynamic properties of the molecular recognition have also been explored using Van't Hoff equation. We have also extended our studies to molecular recognition of the genomic DNA in the condensate as dried thin films. This has important implications for its application in bioelectronics.

  15. Enhanced spectrophotometric determination of Losartan potassium based on its physicochemical interaction with cationic surfactant (United States)

    Abdel-Fattah, Laila; Abdel-Aziz, Lobna; Gaied, Mariam


    In this study, a simple and sensitive spectrophotometric method was developed for determination of Losartan potassium (LST K), an angiotensin-II receptor (type AT1) antagonist, in presence of cationic surfactant cetyltrimethylammonium bromide (CTAB). The physicochemical interaction of LST K with CTAB was investigated. The effect of cationic micelles on the spectroscopic and acid-base properties of LST K was studied at pH 7.4. The binding constant (Kb) and the partition coefficient (Kx) of LST K-CTAB were 1.62 × 105 M-1 and 1.38 × 105; respectively. The binding of LST K to CTAB micelles implied a shift in drug acidity constant (ΔpKa = 0.422). The developed method is linear over the range 0.5-28 μg mL-1. The accuracy was evaluated and was found to be 99.79 ± 0.509% and the relative standard deviation for intraday and interday precision was 0.821 and 0.963; respectively. The method was successfully applied to determine LST K in pharmaceutical formulations.

  16. Dual latex/surfactant templating of hollow spherical silica particles with ordered mesoporous shells. (United States)

    Tan, Bing; Rankin, Stephen E


    Hollow spherical silica particles with hexagonally ordered mesoporous shells are synthesized with the dual use of cetyltrimethylammonium bromide (CTAB) and unmodified polystyrene latex microspheres as templates in concentrated aqueous ammonia. In most of the hollow mesoporous particles, cylindrical pores run parallel to the hollow core due to interactions of CTAB/silica aggregates with the latices. Effects on the product structure of the CTAB:latex ratio, the amount of aqueous ammonia, and the latex size are studied. Hollow particles with hexagonally patterned mesoporous shells are obtained at moderate CTAB:latex ratios. Too little CTAB causes silica shell growth without surfactant templating, and too much induces nucleation of new mesoporous silica particles without latex cores. The concentration of ammonia must be large to induce co-assembly of CTAB, silica, and latex into dispersed particles. The results are consistent with the formation of particles by addition of CTAB/silica aggregates to the surface of latex microspheres. When the size and number density of the latex microspheres are changed, the size of the hollow core and the shell thickness can be controlled. However, if the microspheres are too small (50 nm in this case), agglomerated particles with many hollow voids are obtained, most likely due to colloidal instability.

  17. Periodic marangoni instability in surfactant (CTAB) liquid/liquid mass transfer. (United States)

    Lavabre, Dominique; Pradines, Vincent; Micheau, Jean-Claude; Pimienta, Véronique


    Periodic Marangoni convective instability has been observed in a biphasic system during the mass transfer of cetyltrimethylammonium bromide (CTAB) from an aqueous to a dichloromethane organic phase. Visualization of the convective fluxes was possible thanks to the CTAB crystals that are formed in the aqueous phase at a temperature below the Krafft point. Surface tension and electrical potential oscillations have been shown to be correlated with the fluid motion. Surface tension measurements, representative of the adsorption state, showed fast adsorption during the convective stage, followed by a slower desorption process in the quiet stage. To account for the electrical potential data, two components need to be taken into account. In the quiet stage, the signal was comparable to surface tension, and the main contribution would result from the electrical double layer formed at the interface by charged surfactants. In the convective stage, the electrical potential was furthermore related to the velocity of the fluid in the aqueous layer. Perturbations of the charge distribution in the Gouy-Chapman layer due to tangential flows could be at the origin of the phenomenon.

  18. Thermal Transport across Surfactant Layers on Gold Nanorods in Aqueous Solution. (United States)

    Wu, Xuewang; Ni, Yuxiang; Zhu, Jie; Burrows, Nathan D; Murphy, Catherine J; Dumitrica, Traian; Wang, Xiaojia


    Ultrafast transient absorption experiments and molecular dynamics simulations are utilized to investigate the thermal transport between aqueous solutions and cetyltrimethylammonium bromide (CTAB)- or polyethylene glycol (PEG)-functionalized gold nanorods (GNRs). The transient absorption measurement data are interpreted with a multiscale heat diffusion model, which incorporates the interfacial thermal conductances predicted by molecular dynamics. According to our observations, the effective thermal conductance of the GNR/PEG/water system is higher than that of the GNR/CTAB/water system with a surfactant layer of the same length. We attribute the enhancement of thermal transport to the larger thermal conductance at the GNR/PEG interface as compared with that at the GNR/CTAB interface, in addition to the water penetration into the hydrophilic PEG layer. Our results highlight the role of the GNR/polymer thermal interfaces in designing biological and composite-based heat transfer applications of GNRs, and the importance of multiscale analysis in interpreting transient absorption data in systems consisting of low interfacial thermal conductances.

  19. Effect of surfactant on the electrochemical performance of graphene/iron oxide electrode for supercapacitor (United States)

    Ghasemi, Shahram; Ahmadi, Fatemeh


    In this study, reduced graphene oxide- Fe3O4 (RGO-Fe3O4) nanocomposite is fabricated using simple electrophoretic deposition (EPD) method followed by an electrochemical reduction process. It is characterized using atomic force microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, Raman spectroscopy and scanning electron microscopy. Fe3O4 nanoparticles with 20-50 nm in diameter are uniformly formed on RGO. Electrochemical properties of nanocomposite are characterized by cyclic voltammetery, galvanostatic charge/discharge and electrochemical impedance spectroscopy. According to the galvanostatic charge/discharge analysis, RGO-Fe3O4/SS presents specific capacitance (Cs) of 154 F g-1 at current density of 1 A g-1, which is higher than that of RGO/SS (81 F g-1) in Na2SO4 electrolyte. Also, the electrochemical behaviors show that addition of three kind of surfactant, i.e. sodium dodecyl sulphate, cetyltrimethylammonium bromide, t-octyl phenoxy polyethoxyethanol (Triton X-100) to Na2SO4 aqueous solution can improve the Cs of RGO-Fe3O4/SS electrodes. RGO-Fe3O4/SS in Na2SO4 electrolyte containing Triton X-100 shows maximum Cs of 236 F g-1 at 1 A g-1 which retains 97% of initial capacitance after 500 cycles.

  20. Mesoporous Silica Nanoparticles Loaded with Surfactant: Low Temperature Magic Angle Spinning 13C and 29Si NMR Enhanced by Dynamic Nuclear Polarization

    Energy Technology Data Exchange (ETDEWEB)

    Lafon, Olivier [Universite de Lille Nord de France; Thankamony, Aany S. Lilly [Universite de Lille Nord de France; Kokayashi, Takeshi [Ames Laboratory; Carnevale, Diego [Ecole Polytechnique Federale de Lausanne; Vitzthum, Veronika [Ecole Polytechnique Federale de Lausanne; Slowing, Igor I. [Ames Laboratory; Kandel, Kapil [Ames Laboratory; Vezin, Herve [Universite de Lille Nord de France; Amoureux, Jean-Paul [Universite de Lille Nord de France; Bodenhausen, Geoffrey [Ecole Polytechnique Federale de Lausanne; Pruski, Marek [Ames Laboratory


    We show that dynamic nuclear polarization (DNP) can be used to enhance NMR signals of 13C and 29Si nuclei located in mesoporous organic/inorganic hybrid materials, at several hundreds of nanometers from stable radicals (TOTAPOL) trapped in the surrounding frozen disordered water. The approach is demonstrated using mesoporous silica nanoparticles (MSN), functionalized with 3-(N-phenylureido)propyl (PUP) groups, filled with the surfactant cetyltrimethylammonium bromide (CTAB). The DNP-enhanced proton magnetization is transported into the mesopores via 1H–1H spin diffusion and transferred to rare spins by cross-polarization, yielding signal enhancements εon/off of around 8. When the CTAB molecules are extracted, so that the radicals can enter the mesopores, the enhancements increase to εon/off ≈ 30 for both nuclei. A quantitative analysis of the signal enhancements in MSN with and without surfactant is based on a one-dimensional proton spin diffusion model. The effect of solvent deuteration is also investigated.

  1. Dynamic Study of Gemini Surfactant and Single-chain Surfactant at Air/Water Interface

    Institute of Scientific and Technical Information of China (English)

    Yi Jian CHEN; Gui Ying XU; Shi Ling YUAN; Hai Ying SUN


    Molecular dynamics (MD) simulation are used to study the properties of gemini surfactant of ethyl-α,ω-bis(dodecyldimethylammonium bromide) (C12C2C12) and dodecyltrimethylammonium bromide (DTAB) at the air/water interface, respectively. In the two systems,the surfactant concentrations are both 28 wt. %, and other conditions are also the same. After reaching the thermodynamic equilibrium, the concentration profiles, the radial distributions functions (RDF) and the mean squared displacement (MSD) are investigated. Theresults reveal that the surface activity of C12C2C12 suffactant is higher than DTAB surfactant.

  2. Behavior of cationic surfactants and short-chain alcohols in mixed surface layers at water-air and polymer-water interfaces with regard to polymer wettability II. Wettability of polymers. (United States)

    Zdziennicka, Anna; Jańczuk, Bronisław


    The wettability of polytetrafluoroethylene (PTFE) and polymethylmethacrylate (PMMA) by aqueous solutions of cetyltrimethylammonium bromide (CTAB) mixtures with short-chain alcohols such as methanol, ethanol, and propanol, as well as for 1-hexadecylpyridinium bromide (CPyB) with the same alcohols, was studied on the basis of advancing contact-angle measurements by the sessile drop method over a wide range of alcohol and cationic surfactant concentrations where they can be present in solution in monomeric or aggregated form. It should be noted that the contact angles for aqueous solution mixtures of cationic surfactants with propanol on PTFE surfaces were measured earlier and presented in our previous paper. From the obtained contact-angle values the relationships between cos theta and surface tension of the solutions (gamma(LV)) and that between adhesion tension and gamma(LV) were considered. The relationship between the cos theta and the reciprocal of gamma(LV) was also discussed. From these relationships the critical surface tension of PTFE and PMMA wetting and the correlation between the adsorption of cationic surfactant and alcohol mixtures at water-air and polymer-water interfaces were deduced. On the basis of the contact angles and components and parameters of the surface tension of surfactants, alcohols, and polymers also the Gibbs and Guggenheim-Adam isotherm of adsorption and the effective concentration of alcohols and surfactants at polymer-water interfaces were calculated. Next, the work of adhesion of solution to polymer surface with regard to the surface monolayer composition was discussed. The analysis of the contact angles with regard to adsorption of surfactants and alcohols at polymer-water and water-air interfaces allowed us to conclude that the PTFE wetting depends only on the contribution of the acid-base interactions to the surface tension of aqueous solutions of cationic surfactant and alcohol mixtures, and the adhesion work of solution to its

  3. Anion Exchange on Cationic Surfactant Micelles, and a Speciation Model for Estimating Anion Removal on Micelles during Ultrafiltration of Water. (United States)

    Chen, Ming; Jafvert, Chad T


    Surfactant micelles combined with ultrafiltration can partially, or sometimes nearly completely, separate various ionic and nonionic pollutants from water. To this end, the selectivity of aqueous micelles composed of either cetyltrimethylammonium (CTA(+)) bromide or cetylpyridinium (CP(+)) chloride toward many environmentally relevant anions (IO3(-), F(-), Cl(-), HCO3(-), NO2(-), Br(-), NO3(-), H2PO4(-), HPO4(2-), SO4(2-), and CrO4(2-)) was investigated. Selectivity coefficients of CTA(+) micelles (with respect to Br(-)) and CP(+) micelle (with respect to Cl(-)) for these anions were evaluated using a simple thermodynamic ion exchange model. The sequence of anion affinity for the CTA(+) micelles and for the CP(+) micelles were the same, with decreasing affinity occurring in the order of: CrO4(2-) > SO4(2-) > HPO4(2-) > NO3(-) > Br(-) > NO2(-) > Cl(-) > HCO3(-) > H2PO4(-) ≈ F(-). From the associated component mass balance and ion exchange (i.e., mass action) equations, an overall speciation model was developed to predict the distribution of all anions between the aqueous and micellar pseudophase for complex ionic mixtures. Experimental results of both artificial and real surface waters were in good agreement to model predictions. Further, the results indicated that micelles combined with ultrafiltration may be a potential technology for nutrient and other pollutant removal from natural or effluent waters.

  4. Gemini imidazolium surfactants: synthesis and their biophysiochemical study. (United States)

    Kamboj, Raman; Singh, Sukhprit; Bhadani, Avinash; Kataria, Hardeep; Kaur, Gurcharan


    New gemini imidazolium surfactants 9-13 have been synthesized by a regioselective epoxy ring-opening reaction under solvent-free conditions. The surface properties of these new gemini surfactants were evaluated by surface tension and conductivity measurements. These surfactants have been found to have low critical micelle concentration (cmc) values as compared to other categories of gemini cationic surfactants and also showed the tendency to form premicellar aggregates in solution at sufficiently low concentration below their cmc values. The thermal degradation of these surfactants was determined by thermograviometry analysis (TGA). These new cationic surfactants have a good DNA binding capability as determined by agarose gel electrophoresis and ethidium bromide exclusion experiments. They have also been found to have low cytotoxicity by MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay on the C6 glioma cell line.

  5. Electrokinetic investigation of surfactant adsorption. (United States)

    Bellmann, C; Synytska, A; Caspari, A; Drechsler, A; Grundke, K


    Fuerstenau [D.W. Fuerstenau, in: M.L. Hair (Ed.), Dekker, New York, 1971, p. 143] has already discussed the role of hydrocarbon chain of surfactants, the effect of alkyl chain length, chain structure and the pH of the solution on the adsorption process of surfactants. Later Kosmulski [M. Kosmulski, Chemical Properties of Material Surfaces, Surfactant Science Series, vol. 102, Dekker, New York, Basel, 2001] included the effect of surfactant concentration, equilibration time, temperature and electrolyte in his approaches. Certainly, the character of the head groups of the surfactant and the properties of the adsorbent surface are the basis for the adsorption process. Different surfactants and adsorbents cause different adsorption mechanisms described firstly by Rosen [M.J. Rosen, Surfactants and Interfacial Phenomena, second ed., Wiley, New York, 1989]. These adsorption mechanisms and their influencing factors were studied by electrokinetic investigations. Here only changes of the charges at the surfaces could be detected. To control the results of electrokinetic investigations they were compared with results from ellipsometric measurements. In the case of surfactant adsorption the chain length was vitally important. It could be shown by the adsorption of alkyl trimethyl ammonium bromides onto polymer films spin coated at wafer surfaces. The influence of the chain length depending on surface properties of the polymer film was studied. Streaming potential measurements were applied for these investigations. The obtained results enabled us to calculate the molar cohesive free energy per mol of CH2-group in the alkaline chain of the surfactant if all other specific adsorption effects were neglected.

  6. Progress in the understanding of surface structure and surfactant influence on the electrocatalytic activity of gold nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, V.C. [CQB, Departamento de Quimica e Bioquimica, Faculdade de Ciencias da Universidade de Lisboa, Campo Grande, 1749-016 Lisboa (Portugal); CIQ-UP, Linha 4, Departamento de Quimica, Faculdade de Ciencias da Universidade do Porto, Rua do Campo Alegre 687, 4169-007 Porto (Portugal); Solla-Gullon, J.; Aldaz, A. [Instituto Universitario de Electroquimica, Universidad de Alicante, Apartado 99, 03080 Alicante (Spain); Silva, F. [CIQ-UP, Linha 4, Departamento de Quimica, Faculdade de Ciencias da Universidade do Porto, Rua do Campo Alegre 687, 4169-007 Porto (Portugal); Abrantes, L.M., E-mail: [CQB, Departamento de Quimica e Bioquimica, Faculdade de Ciencias da Universidade de Lisboa, Campo Grande, 1749-016 Lisboa (Portugal)


    Research highlights: > Electrochemical behaviour of AuNPs depends on the facets present in their surface. > Cubic and rod shaped nanoparticles comprise distinct crystallographic orientation. > Key rule of surfactant on the selective availability of specific surface domains. > AA oxidation at less stabilised (1 1 1) rod facets displays single-crystal response. - Abstract: The preparation of gold nanoparticles (Au-NPs) displaying specific shape, size and surface crystallographic domains has been investigated aiming to clarify the effect of the surface crystallographic orientation, of the synthesised nanoparticles, and surfactant influence on the electrochemical response of the ITO/Au-NPs modified electrodes. Polymorphic and nanorod-shaped Au-NPs have been obtained using distinct synthetic procedures in the presence of cetyltrimethylammonium bromide (CTAB), through seed-mediated growth methods, displaying distinct surface crystallographic domains confirmed by transmission electron microscopy, X-ray diffraction analysis and under potential deposition (UPD) of lead. The nanoparticles have been physically immobilised by casting on indium tin oxide (ITO) surfaces and the electrocatalytic activity of the Au-NPs evaluated using the ascorbic acid (AA) oxidation reaction, by cyclic voltammetry. The polymorphic and distinct surface crystallographic orientations of the Au-NPs were reflected in an irreproducible electrochemical response. Using gold nanorods comprising (1 1 1) and (1 1 0) facets and gold nanocubes consisting of faces displaying (1 0 0) surface domains, by contrasting the behaviour of CTAB-stabilised and clean particles, it has been possible to verify that the distinct voltammetric results are due to the exposure of specific crystallographic orientations owing to dissimilar interaction strength of CTAB with those facets.

  7. Cationic versus anionic surfactant in tuning the structure and interaction of nanoparticle, protein, and surfactant complexes. (United States)

    Mehan, Sumit; Aswal, Vinod K; Kohlbrecher, Joachim


    The structure and interaction in complexes of anionic Ludox HS40 silica nanoparticle, anionic bovine serum albumin (BSA) protein, and cationic dodecyl trimethylammonium bromide (DTAB) surfactant have been studied using small-angle neutron scattering (SANS). The results are compared with similar complexes having anionic sodium dodecyl sulfate (SDS) surfactant (Mehan, S; Chinchalikar, A. J.; Kumar, S.; Aswal, V. K.; Schweins, R. Langmuir 2013, 29, 11290). In both cases (DTAB and SDS), the structure in nanoparticle-protein-surfactant complexes is predominantly determined by the interactions of the individual two-component systems. The nanoparticle-surfactant (mediated through protein-surfactant complex) and protein-surfactant interactions for DTAB, but nanoparticle-protein (mediated through protein-surfactant complex) and protein-surfactant interactions for SDS, are found to be responsible for the resultant structure of nanoparticle-protein-surfactant complexes. Irrespective of the charge on the surfactant, the cooperative binding of surfactant with protein leads to micellelike clusters of surfactant formed along the unfolded protein chain. The adsorption of these protein-surfactant complexes for DTAB on oppositely charged nanoparticles gives rise to the protein-surfactant complex-mediated aggregation of nanoparticles (similar to that of DTAB surfactant). It is unlike that of depletion-induced aggregation of nanoparticles with nonadsorption of protein-surfactant complexes for SDS in similarly charged nanoparticle systems (similar to that of protein alone). The modifications in nanoparticle aggregation as well as unfolding of protein in these systems as compared to the corresponding two-component systems have also been examined by selectively contrast matching the constituents.

  8. Interactions of organic contaminants with mineral-adsorbed surfactants (United States)

    Zhu, L.; Chen, B.; Tao, S.; Chiou, C.T.


    Sorption of organic contaminants (phenol, p-nitrophenol, and naphthalene) to natural solids (soils and bentonite) with and without myristylpyridinium bromide (MPB) cationic surfactant was studied to provide novel insight to interactions of contaminants with the mineral-adsorbed surfactant. Contaminant sorption coefficients with mineral-adsorbed surfactants, Kss, show a strong dependence on surfactant loading in the solid. At low surfactant levels, the Kss values increased with increasing sorbed surfactant mass, reached a maximum, and then decreased with increasing surfactant loading. The Kss values for contaminants were always higher than respective partition coefficients with surfactant micelles (Kmc) and natural organic matter (Koc). At examined MPB concentrations in water the three organic contaminants showed little solubility enhancement by MPB. At low sorbed-surfactant levels, the resulting mineral-adsorbed surfactant via the cation-exchange process appears to form a thin organic film, which effectively "adsorbs" the contaminants, resulting in very high Kss values. At high surfactant levels, the sorbed surfactant on minerals appears to form a bulklike medium that behaves essentially as a partition phase (rather than an adsorptive surface), with the resulting Kss being significantly decreased and less dependent on the MPB loading. The results provide a reference to the use of surfactants for remediation of contaminated soils/sediments or groundwater in engineered surfactant-enhanced washing.

  9. The Effect of Surfactant Micelles on the Dissociation Constants and the Colour-changing Points and Ranges of Acid-base Indicators%胶束对酸碱指示剂离解平衡和变色点及变色范围的影响

    Institute of Scientific and Technical Information of China (English)

    刘凡; 刘静; 张元勤; 李晓燕


    探讨了十六烷基三甲基溴化铵(CTMAB)、十二烷基硫酸钠(SDS)和TritonX-1003种胶束对酸碱指示剂百里香酚蓝和溴百里香酚蓝离解反应的离解常数的影响,进而研究了以上3种胶束对指示剂变色点和变色范围的影响,实验结果表明,选择适当的胶束溶液作为滴定介质,不仅可以扩大酸碱指示剂的应用范围,而且还大大提高了测量的准确度。%The effect of cetyltrimethylammonium bromide (CTMAB), sodiumdodecyl sulfate(SDS) and poly(oxyethylene)(9.5) p-(1,1,3,3-tetramethyl) (Triton X-100) on the dissociation constants of thymol blue and thymol blue bromide, and the color-changing point and color-changing range were studied. The experimental results indicated that the application range of acid-base indicators became wider and the titration accuracy was increased when an appropriate surfactant micellar solution was chosen as a titration medium.

  10. Interaction between DNA and Trimethyl-Ammonium Bromides with Different Alkyl Chain Lengths

    Directory of Open Access Journals (Sweden)

    Chao Cheng


    Full Text Available The interaction between λ—DNA and cationic surfactants with varying alkyl chain lengths was investigated. By dynamic light scattering method, the trimethyl-ammonium bromides-DNA complex formation was shown to be dependent on the length of the surfactant’s alkyl chain. For surfactants with sufficient long alkyl chain (CTAB, TTAB, DTAB, the compacted particles exist with a size of ~60–110 nm at low surfactant concentrations. In contrast, high concentration of surfactants leads to aggregates with increased sizes. Atomic force microscope scanning also supports the above observation. Zeta potential measurements show that the potential of the particles decreases with the increase of surfactant concentration (CTAB, TTAB, DTAB, which contributes much to the coagulation of the particles. For OTAB, the surfactant with the shortest chain in this study, it cannot fully neutralize the charges of DNA molecules; consequently, the complex is looser than other surfactant-DNA structures.

  11. Preparation of Mesoporous Nano-Hydroxyapatite Using a Surfactant Template Method for Protein Delivery

    Institute of Scientific and Technical Information of China (English)

    Xiaodong Wu; Xiaofeng Song; Dongsong Li; Jianguo Liu; Peibiao Zhang; Xuesi Chen


    Mesoporous nano-hydroxyapatite (n-HA) has gained more and more attention as drug storage and release hosts.The aim of this study is to observe the effect of the ratio of surfactant to the theoretical yield of HA on the mesoporous n-HA,then to reveal the effect of the mesoporous nanostrueture on protein delivery.The mesoporous n-HA was synthesized using the wet precipitation in the presence of cetyltrimethylammonium bromide (CTAB) at ambient temperature and normal atmospheric pressure.The morphology,size,crystalline phase,chemical composition and textural characteristics of the product were well characterized by X-ray Powder Diffraction (XRD),Fourier Transform Infrared Spectroscopy (FTIR),Scanning Electron Microscopy (SEM),Transmission Electron Microscopy (TEM),Dynamic Light Scattering (DLS) and N2 adsorption/desorption,respectively.The protein adsorption/release studies were also carried out by using Bovine Serum Albumin (BSA) as a model protein.The results reveal that the mesoporous n-HA synthesized with CTAB exhibits high pure phase,low crystallinity and the typical characteristics of the mesostructure.The BSA loading increases with the specific surface area and the pore volume of n-HA,and the release rates of BSA are different due to their different pore sizes and pore structures,n-HA synthesized with 0.5% CTAB has the highest BSA loading and the slowest release rate because of its highest surface area and smaller pore size.These mesoporous n-HA materials demonstrate a potential application in the field of protein delivery due to their bioaetive,biocompatible and mesoporous properties.

  12. Pseudo Peak Phenomena in Micellar Electrokinetic Capillary Chromatography by Using Cationic Surfactant%阳离子表面活性剂胶束电动毛细管色谱中的假峰现象

    Institute of Scientific and Technical Information of China (English)

    陈冠华; 杨更亮; 田益玲; 陈义


    Using cetyltrimethylammonium bromide as pseudo stationary phase, the origin of pseudo peak in micellar electrokinetic capillary chromatography was investigated, relating to the fact that under certain conditions two peaks might come arise from a single component. Experiments further showed that the relative areas of the two peaks of an analyte were dependent on the reation time and temperature, under which reactions between analyte and surfactant occurred, and also dependent on concentration of surfactant in sample solutions. The results suggested that the interaction between analyte and surfactant is a slow process, and a stable substance might be formed via the interaction and lead to the formation of pseudo peaks. The fast interaction mechanism between the solute and the micelle could be queried according to the experimental results.%研究了以十六烷基三甲基溴化铵为准固定相的胶束电动毛细管色谱中假峰的起源.指出在一定条件下,一个组分可能出现两个峰.实验表明,被分析物双峰的相对峰面积取决于被分析物与表面活性剂反应的时间、温度以及表面活性剂在样品中的浓度.这意味着被分析物与表面活性剂之间的反应是一个慢过程,这种相互作用能够产生一种稳定的物质,并导致假峰的形成.根据实验结果,溶质与胶束之间的快速相互作用机理应被质疑.

  13. Switchable Surfactants

    National Research Council Canada - National Science Library

    Yingxin Liu; Philip G. Jessop; Michael Cunningham; Charles A. Eckert; Charles L. Liotta


    .... We report that long-chain alkyl amidine compounds can be reversibly transformed into charged surfactants by exposure to an atmosphere of carbon dioxide, thereby stabilizing water/alkane emulsions...

  14. Highly ordered binary assembly of silica mesochannels and surfactant micelles for extraction and electrochemical analysis of trace nitroaromatic explosives and pesticides. (United States)

    Yan, Fei; He, Yayun; Ding, Longhua; Su, Bin


    The rapid and sensitive detection of nitroaromatic compounds is of great significance for human health, the environment, and public security. The present work reports on the extraction and electrochemical analysis of trace nitroaromatic compounds, such as explosives and organophosphate pesticides (OPs), using the indium tin oxide (ITO) electrodes modified with a highly ordered and aligned binary assembly of silica mesochannels and micelles (BASMM). With a pore diameter of ca. 2-3 nm, silica mesochannels (SMs) perpendicularly oriented to the ITO electrode surface can provide hard and robust supports to confine the soft cylindrical micelles formed by the aggregation of cationic surfactants, namely, cetyltrimethylammonium bromide (CTAB). Due to the organized self-assembly of hydrocarbon tails of CTAB surfactants, each micelle has a hydrophobic core, which acts as an excellent adsorbent for rapid extraction and preconcentration of trace nitroaromatic compounds from aqueous solutions via the hydrophobic effect. Furthermore, the cylindrical micelles are directly in contact with the underlying electrode surface, to which extracted compounds can freely diffuse and then be reduced therein, thus allowing their determination by means of voltammetry. Using the BASMM/ITO sensor, electrochemical analysis of trace nitroaromatic explosives, including 2,4,6-trinitrotoluene (TNT), 2,4,6-trinitrophenol, 2,6-dinitrotoluene, 3-nitrophenol, and nitrobenzene, and OPs, such as paraoxon, methyl parathion, and fenitrothion, was achieved with a fast response, wide linear range, high sensitivity, and low detection limit at the ppb level. TNT and paraoxon in real apple, tea, and water samples were also determined. By combining the heterogeneous extraction and determination in one ordered binary nanostructure, the BASMM sensor provides a very simple, rapid, and cost-effective way for analysis of nitroaromatic compounds and can be extended to a wide range of lipophilic yet redox-active analytes.


    Institute of Scientific and Technical Information of China (English)


    In this study, X-ray diffraction (XRD), Fourier transform infrared spectrometer (FTIR) together with Scanning probe microscopy (SPM) were used to characterize the structure and morphology of the complexes, where the hydrobiotites (Xinjiang) were modified by single-chain surfactants octyltrimethylammonium bromide (OTMA) and octadecyltrimethylammonium bromide (ODTMA). XRD patterns showed that the structure of complexes was significantly influenced by the surfactant concentration and the alkyl chain length, because obvious changes took place in the basal spacing. Furthermore, according to the XRD results, several arrangements of surfactant molecules within the hydrobiotite interlayer space were deduced. The FTIR spectrum indicated that the surfactant contents in complexes dramatically increased with the alkyl chain length. The SPM micrographs demonstrated that the surfaces of complexes prepared at lower surfactant concentration were relatively flat compared with that prepared at higher concentration, while those with higher surfactant concentration had much steeper surface due to the alkyl chain length. It was concluded that structure and morphology of surfactant/hydrobiotite complexes depend not only on the surfactant concentration, but also strongly on the surfactant species.

  16. Alcohol--Induced Polyelectrolyte-Surfactant Complex Coacervate Systems: Characterization and Applications in Enzyme and Protein Extraction (United States)

    Nejati Moshtaghin, Mahboubeh

    The focus of this thesis is to achieve a better understanding of the newly discovered surfactant-polyelectrolyte complex coacervate (SPCC) systems induced by fluoroalcohol/acid as well as short chain aliphatic alcohol; and to elucidate their applications in extraction and enrichment of proteins and enzyme. We have discovered that fluoroalcohols and --acids induce complex coacervation and phase separation in the aqueous mixtures of oppositely charged anionic polyelectrolytes; specifically, sodium salts of polyacrylic acid and polymethacrylic acid and cationic surfactant (cetyltrimethylammonium bromide, CTAB) over a broad range of concentrations of mole fractions of the oppositely charged amphiphiles. Accordingly, these new classes of coacervators will significantly broaden the scope and facilitate engineering of new coacervate phases. Toward these goals, we have inspected the formation of surfactant-polyelectrolyte complex coacervates in the presence of fluoroalcohols namely hexafluoroisopropanol (HFIP) and Trifluoroethanol (TFE). Furthermore, the extent of coacervation as a function of concentrations the system components, and charge ratios of the oppositely charged amphiphiles has been investigated. Polyelectrolytes are considered to be milder reagents, as compared to surfactants, regarding proteins denaturation. This highlights the importance of a detailed investigation of the efficiency of our coacervate systems for extraction and preconcentration of proteins and enzymes, especially, when the biological activity of the extracted proteins needs to be maintained based on the objectives mentioned above, the results of the investigations have been organized in four chapters. In Chapter II, the phase behavior of the FA-SPCC will be investigated. The objective is to examine the phase behavior and phase properties with respect to the extent of coacervation in different solution conditions. In particular, the effects of different solution variables such as concentration

  17. Chemiluminescence of phthalhydrazide derivatives in organized media: Interactions with surfactants and cyclodextrins

    Energy Technology Data Exchange (ETDEWEB)

    Maeztu, Raquel [Departamento de Quimica y Edafologia, Facultad de Ciencias, Universidad de Navarra, 31080 Pamplona (Spain); Gonzalez-Gaitano, Gustavo, E-mail: gaitano@unav.e [Departamento de Quimica y Edafologia, Facultad de Ciencias, Universidad de Navarra, 31080 Pamplona (Spain); Tardajos, Gloria [Departamento de Quimica-Fisica I, Facultad de CC. Quimicas, Universidad Complutense, 28040 Madrid (Spain); Stilbs, Peter [Division of Physical Chemistry and Industrial NMR Centre, Department of Chemistry, Royal Institute of Technology, SE-10044, Stockholm (Sweden)


    The chemiluminescent oxidation of some phthalhydrazide derivatives, luminol (LUM), isoluminol (ISOL), N-(4-aminobutyl)-N-ethylisoluminol (ABEI) and N-(6-aminohexyl)-N-ethylisoluminol (AHEI), has been carried out in micellar media and in the presence of natural cyclodextrins (CDs), using Co(II) as catalyst and H{sub 2}O{sub 2} as oxidant. The cationic cetyltrimethylammonium bromide (CTAB) and, in a lesser extent, the anionic sodium dodecyl sulfate (SDS) produce quenching in the chemiluminescence (CL) of all the luminophores at concentrations above the cmc, whereas slight enhancements are attained with the non-ionic pentaethylene glycol monododecyl ether (C{sub 12}E{sub 5}). On the contrary, the incorporation of the CDs to the reaction produces a remarkable intensification of the CL. Binding of the luminophores to the macrocycles and the micelles has been studied by Pulsed-Gradient-Spin-Echo-NMR (PGSE-NMR) and fluorescence anisotropy. The cationic CTAB decreases the emission mainly due to charge compensation as a result of the association of the luminophores and the luminescent intermediates to the micelles. The presence of the alkyl substituents of ABEI and AHEI provides an additional hydrophobic contribution to the binding process. SDS quenches this reaction as the micelles retain Co(II) on their anionic layer. The protection and stabilization of these luminophores or their luminescent intermediates provided by the cavities of the CDs make this family of cyclic oligosaccharides much more suitable agents than the surfactants for enhancing the CL in aqueous media for this specific reaction. - Research highlights: Natural cyclodextrins act as boosters of the chemiluminescence of luminol and its derivatives. Cyclodextrins can be successfully employed for improving the possibilities of those applications that make use of the CL of luminol and its derivatives as a detection or quantification method. Ionic and non-ionic surfactants do not either enhance or even quench the

  18. Rheological properties of novel viscoelastic micelle systems containing anionic-nonionic dimeric surfactant

    Institute of Scientific and Technical Information of China (English)

    方波; 曹丹红; 江体乾


    The viscoelastic micelle systems formed by novel anionic-nonionic dimeric surfactant and conventional cationic surfactant cetyltrimethylammonium(1631) were studied.The viscoelasticity,thixotropy,flow curves and constitutive equation for the novel viscoelastic micelle systems were investigated.The results show that the micelle systems possess viscoelasticity,thixotropy,and shear thinning property.Some micelle systems possess hysteresis loops showing both viscoelasticity and thixotropy.It is proved that the flow curves are characterized by the co-rotational Jeffreys constitutive equation correctly.

  19. Determination of micellar aggregation numbers of Gemini surfactants%Gemini阳离子表面活性剂胶束聚集数的测定

    Institute of Scientific and Technical Information of China (English)

    倪人捷; 黄煜; 姚成


    以芘为荧光探针,十六烷基氯化吡啶为猝灭剂,用芘饱和水溶液配制浓度范围为0.10 ~2.40 mmol/L的系列Gemini阳离子表面活性剂溶液,用稳态荧光探针法测定了该系列表面活性剂的临界胶束浓度CMC与胶束聚集数N_m.实验结果表明:该方法测定的CMC值与电导率法测定的CMC值相当;选择猝灭剂浓度为0.20~0.50 mmol/L时,所测得的表面活性剂胶束聚集数基本不变;当表面活性剂16-X-16浓度为4~9倍CMC时,胶束聚集数随表面活性剂浓度增大而线性增大;利用外推法得到的该表面活性剂临界胶束聚集数约为亲油基同碳数的CTAB临界胶束聚集数的一半.%The critical micelle concentration (CMC) and micellar aggregation numbers of series of cationic Gemini surfactants are determined by steady-state fluorescence probe method in which py-rene was used as a fluorescence probe and cetylpyridinium chloride as a quencher. The experimental results indicate that the CMC values are basically in agreement with the values determined by conductivity method, the aggregation numbers of this series cationic Gemini surfactants are essentially constant when the concentrations of the quencher are in 0. 20 to 0. 50 mmol/L. The aggregation numbers of the Gemini surfactant(16-X-16) increases linearly with the increase of surfactant concentration in the range of 4 to 9 times of CMC. The critical micellar aggregation numbers obtained by extrapolation method are half of the CTAB's(cetyltrimethylammonium bromide) which is hydropho-bic with the same carbon number.

  20. Assembly modulation of PDI derivative as a supramolecular fluorescence switching probe for detection of cationic surfactant and metal ions in aqueous media. (United States)

    Dwivedi, Atul K; Pandeeswar, M; Govindaraju, T


    We report an amphiphilic perylene diimide (1), a bimolecular analog of l-3,4-dihydroxyphenylalanine (L-DOPA), as a reversible fluorescence switching probe for the detection and sensing of cationic surfactants and Fe(3+)/Cu(2+) in an aqueous media respectively by means of host-guest interactions driven assembly and disassembly of 1. Photophysical studies of 1, going from dimethyl sulfoxide (DMSO) (State-I) to pure aqueous medium (State-II), suggested the formation of self-assembled aggregates by displaying very weak fluorescence emission along with red shifted broad absorption bands. Interestingly, the cationic surfactant cetyltrimethylammonium bromide (CTAB) could disassemble 1 in miceller conditions by restoring bright yellow fluorescence and vibronically well-defined (Franck-Condon progressions A0-0/A0-1 ≈ 1.6) absorption bands of 1 over other neutral and anionic surfactants (State-III). Owing to the metal chelating nature of L-DOPA, 1 was able to sense Fe(3+) and Cu(2+) among a pool of other metal ions by means of fluorescence switching off state, attributed to metal interaction driven assembly of 1 (State-IV). Such metallosupramolecular assemblies were found to reverse back to the fluorescence switching on state using a metal ion chelator, diethylenetriaminepentaacetic acid (DTPA, State-III), further signifying the role of metal ions toward assembly of 1. Formation of assembly and disassembly could be visualized by the diminished and increased yellow emission under green laser light. Further, the assembly-disassembly modulation of 1 has been extensively characterized using infrared (IR), mass spectrometry, microscopy and dynamic light scattering (DLS) techniques. Therefore, modulation of the molecular self-assembly of PDI derivative 1 in aqueous media (assembled state, State-II) by means of host-guest interactions provided by micellar structures of CTAB (disassembled state, State-III), metal ion (Fe(3+) and Cu(2+)) interactions (assembled state, State-IV) and

  1. Estudo da adsorção do surfatante catiônico brometo de cetiltrimetil amônio em diferentes matrizes inorgânicas preparadas via nióbio metálico Adsorption study of the cationic surfactant cetyl trimethylammonium bromide onto hydrous niobium oxide matrix

    Directory of Open Access Journals (Sweden)

    P. H. F. Pereira


    Full Text Available É mostrada a preparação de diferentes materiais inorgânicos a partir de nióbio metálico e seu comportamento no processo de adsorção de brometo de cetiltrimetil amônio (CTABr. Os materiais inorgânicos estudados são o óxido de nióbio e o fosfato de nióbio hidratado. Os óxidos de nióbio foram obtidos pelo método da precipitação em solução homogênea com a decomposição térmica de (NH42CO3 realizada a 45 ºC e a 90 ºC. O fosfato de nióbio hidratado foi obtido pela dissolução do nióbio metálico a uma mistura de ácido fluorídrico e nítrico e adição de ácido fosfórico. Pelo método de adsorção gasosa (BET e por microscopia eletrônica de varredura verificou-se que os materiais não apresentam mudança significativa nas características físicas. As isotermas de Langmuir e de Freundlich revelaram que o melhor resultado de adsorção do surfactante CTABr foi alcançado para o óxido de nióbio hidratado preparado a 90 ºC, com capacidade de adsorção máxima, segundo modelo de Langmuir, com 14,13 mg.g-1.The preparation in inorganic material different from metallic niobium and its effect onto adsorption process of the cetyl trimethylammonium bromide CTABr is reported. The inorganic materials are studied niobium oxide hydrous and niobium phosphate hydrous. The niobium oxide hydrous were obtained by homogeneous solution precipitation method with thermal decomposition of (NH42CO3 at 45 ºC and 90 ºC .The niobium phosphate hydrous were prepared using of metallic niobium dilution in a mixture of fluoridric/nitric (10:1 and after phosphoric acid addition. Through the BET method and the SEM technique it was verified that the material suffer no significant change in the physical characteristics. The Langmuir and Freundlich isotherms showed better result to surfactant CTABr adsorption using the material prepared at 90 ºC, according to Langmuir model with maximum adsorption capacity of 14.13 mg.g-1.

  2. Cationic gemini pyrrolidinium surfactants based sweeping-micellar electrokinetic chromatography for simultaneous detection of nine organic pollutants in environmental water. (United States)

    Tian, Yu; Wei, Ran; Cai, Bo; Dong, Jinfeng; Deng, Bin; Xiao, Yuxiu


    A series of novel cationic gemini surfactants with pyrrolidinium head groups, 1,1'-(butane-1,s-alkyl) bis (1-alkylpyrrolidinium) (Cn-4-CnPB, n=12, 14, 16), were employed as carriers in sweeping-micellar electrokinetic chromatography (sweeping-MEKC) for simultaneous detection of nine organic water pollutants, including polycyclic aromatic hydrocarbons, sulfonamides and steroids. The sweeping and separation conditions were optimized. Cn-4-CnPB (n=12, 14, 16) were compared with cetyltrimethylammonium bromide (CTAB) in terms of their abilities to preconcentrate and separate the nine analytes. Under the optimized conditions, the sensitivity enhancement factors based on the peak height (SEFsHeight) were ca. 310-580 of C16-4-C16PB, which were higher than those of C14-4-C14PB (120-290) and C12-4-C12PB (110-160). Meanwhile, the SEFsHeight of C16-4-C16PB were higher than those of 30% (v/v) methanol-modified CTAB (140-320). The C16-4-C16PB based sweeping-MEKC, coupled with offline solid phase extraction and UV detection (228nm), was used to analyze spiked environmental water samples. The nine analytes were successfully separated and detected. The limit of detection (S/N=3) was in range of 2.79-3.76ng/mL, and the recovery ranged from 70.8% to 95.5% with the RSDs less than 9.89%. This study confirms that the C16-4-C16PB based sweeping-MEKC has significant advantages over the CTAB based sweeping-MEKC and it is a promising method for sensitive and simultaneous detection of polycyclic aromatic hydrocarbons, sulfonamides and steroids in environmental water samples.

  3. Rapacuronium bromide (Organon Teknika). (United States)

    Plowman, A N


    Organon Teknika's rapacuronium bromide (Org-9487), the 16-N-allyl, 17-beta-propionate analog of vecuronium bromide, is in phase III clinical trials in the US and Europe for potential use as an anesthetic. It is a steroidal neuromuscular blocking drug characterized by low potency, rapid rate of block development and short time course of neuromuscular blocking action as compared with other non-depolarizing compounds [170210,221422]. A multicenter, randomized, assessor-blind, placebo-controlled, dose-finding study in patients undergoing tracheal intubation showed that the drug produced a dose dependent neuromuscular block. Doses of 1.5 to 2 mg/kg allowed rapid intubation and short duration of action [273336]. Another study showed that the drug does not cause cardiovascular side-effects [273336]. A meeting was held in Europe on 8 February 1999 to brief company employees on the registration and release of rapacuronium [319211] for which the company anticipates a launch in late 1999 [320706]. Organon estimates that the market value of Org-9487 is between dollar 100 m and dollar 250 m a year, each for Europe and the US [221422].

  4. Effect of surfactant structure on catalysis of microemulsion for photoisomerization of trans-stilbene

    Institute of Scientific and Technical Information of China (English)


    In this study, the photoisomerization of trans-stilbene was carried out in water in oil (W/O) microemulsions by using sodium dodecyl sulfate (SDS), dodecyl trimethyl ammonium bromide (DTAB) and cetyl trimethyl ammonium bromide (CTAB) as surfactant, respectively. The catalytic effect of microemulsion on this reaction is closely related to the structure of surfactanz. When there is no photosensitizer 9,10-dicyanoanthracene (DCA), the surfactant with shorter hydrophobic chain is preferred, while in the presence of DCA, the surfactant with anionic polar group is preferred.

  5. Adsorption layer properties of alkyltrimethylammonium bromides at interfaces between water and different alkanes. (United States)

    Mucic, N; Kovalchuk, N M; Aksenenko, E V; Fainerman, V B; Miller, R


    We measured the interfacial tensions of aqueous solutions against different oil phases using drop profile analysis tensiometry (PAT-1, Sinterface Technologies, Germany) for decyl- and dodecyltrimethylammonium bromide (C10TAB and C12TAB) in phosphate buffer (10 mM, pH7). The following alkanes were used as oil phases: hexane, heptane, octane, nonane, decane, dodecane and tetradecane. The obtained equilibrium interfacial tension isotherms were fitted by the Frumkin Ionic Compressibility model (FIC). The surfactants adsorb at the water/oil interface in competition with the oil molecules. At high surfactant surface coverage this competitive adsorption is manifested in two ways. First, for short chain surfactants, the oil molecules are embedded into the adsorption layer. Second, for long chain surfactants, the short alkane chains of the oil molecules are squeezed out from the adsorption layer due to strong mutual interaction between surfactants' chains. Copyright © 2013 Elsevier Inc. All rights reserved.

  6. Methylnaltrexone bromide methanol monosolvate

    Directory of Open Access Journals (Sweden)

    Xinbo Zhou


    Full Text Available In the title compound [systematic name: (4R,4aS,7aR,12bS-3-cyclopropylmethyl-4a,9-hydroxy-7-oxo-2,3,4,4a,5,6,7,7a-octahydro-1H-4,12-methanobenzofuro[3,2-e]isoquinolin-3-ium bromide methanol monosolvate], C21H26NO4+·Br−·CH3OH, two of the three six-membered rings adopt chair conformations while the third, which contains a C=C double bond, adopts an approximate half-boat conformation. The 2,3-dihydrofuran ring adopts an envelope conformation. In the crystal, the components are linked by O—H...O and O—H...Br hydrogen bonds. The absolute stereochemistry was inferred from one of the starting materials.

  7. Iron bromide vapor laser (United States)

    Sukhanov, V. B.; Shiyanov, D. V.; Trigub, M. V.; Dimaki, V. A.; Evtushenko, G. S.


    We have studied the characteristics of a pulsed gas-discharge laser on iron bromide vapor generating radiation with a wavelength of 452.9 nm at a pulse repetition frequency (PRF) of 5-30 kHz. The maximum output power amounted to 10 mW at a PRF within 5-15 kHz for a voltage of 20-25 kV applied to electrodes of the discharge tube. Addition of HBr to the medium produced leveling of the radial profile of emission. Initial weak lasing at a wavelength of 868.9 nm was observed for the first time, which ceased with buildup of the main 452.9-nm line.

  8. Synthesis and properties of novel gemini surfactant with short spacer

    Institute of Scientific and Technical Information of China (English)


    Cationic gemini surfactant dimethylene-1,2-bis(dodecyldiethylammonium bromide), referred to as C12C2C12(Et) was synthesized, and its surface property and aggregation behavior in aqueous solution were studied. The value of γat the critical micelle concentration (γcmc) is much smaller than that of the surfactant homologues with longer spacer. Spherical and elongated micelles were formed in the aqueous solution of this gemini surfactant,and the spherical micelles were absolutely dominant compared to the elongated micelles at our studied concentration quantitatively.

  9. Molecular-thermodynamic theory of micellization of multicomponent surfactant mixtures: 2. pH-sensitive surfactants. (United States)

    Goldsipe, Arthur; Blankschtein, Daniel


    In article 1 of this series, we developed a molecular-thermodynamic (MT) theory to model the micellization of mixtures containing an arbitrary number of conventional (pH-insensitive) surfactants. In this article, we extend the MT theory to model mixtures containing a pH-sensitive surfactant. The MT theory was validated by examining mixtures containing both a pH-sensitive surfactant and a conventional surfactant, which effectively behave like ternary surfactant mixtures. We first compared the predicted micellar titration data to experimental micellar titration data that we obtained for varying compositions of mixed micelles containing the pH-sensitive surfactant dodecyldimethylamine oxide (C12DAO) mixed with either a cationic surfactant (dodecyltrimethylammonium bromide, C12TAB), a nonionic surfactant (dodecyl octa(ethylene oxide), C12E8), or an anionic surfactant (sodium dodecyl sulfate, SDS) surfactant. The MT theory accurately modeled the titration behavior of C12DAO mixed with C12E8. However, C12DAO was observed to interact more favorably with SDS and with C12TAB than was predicted by the MT theory. We also compared predictions to data from the literature for mixtures of C12DAO and SDS. Although the pH values of solutions with no added acid were modeled with only qualitative accuracy, the MT theory resulted in quantitatively accurate predictions of solution pH for mixtures containing added acid. In addition, the predicted degree of counterion binding yielded a lower bound to the experimentally measured value. Finally, we predicted the critical micelle concentration (cmc) of solutions of two pH-sensitive surfactants, tetradecyldimethylamine oxide (C14DAO) and hexadecyldimethyl betaine (C16Bet), at varying solution pH and surfactant composition. However, at the pH values considered, the pH sensitivity of C16Bet could be neglected, and it was equivalently modeled as a zwitterionic surfactant. The cmc's predicted using the MT theory agreed well with the experimental

  10. Influence of surfactants in forced dynamic dewetting. (United States)

    Henrich, Franziska; Fell, Daniela; Truszkowska, Dorota; Weirich, Marcel; Anyfantakis, Manos; Nguyen, Thi-Huong; Wagner, Manfred; Auernhammer, Günter K; Butt, Hans-Jürgen


    In this work we show that the forced dynamic dewetting of surfactant solutions depends sensitively on the surfactant concentration. To measure this effect, a hydrophobic rotating cylinder was horizontally half immersed in aqueous surfactant solutions. Dynamic contact angles were measured optically by extrapolating the contour of the meniscus to the contact line. Anionic (sodium 1-decanesulfonate, S-1DeS), cationic (cetyl trimethylammonium bromide, CTAB) and nonionic surfactants (C4E1, C8E3 and C12E5) with critical micelle concentrations (CMCs) spanning four orders of magnitude were used. The receding contact angle in water decreased with increasing velocity. This decrease was strongly enhanced when adding surfactant, even at surfactant concentrations of 10% of the critical micelle concentration. Plots of the receding contact angle-versus-velocity almost superimpose when being plotted at the same relative concentration (concentration/CMC). Thus the rescaled concentration is the dominating property for dynamic dewetting. The charge of the surfactants did not play a role, thus excluding electrostatic effects. The change in contact angle can be interpreted by local surface tension gradients, i.e. Marangoni stresses, close to the three-phase contact line. The decrease of dynamic contact angles with velocity follows two regimes. Despite the existence of Marangoni stresses close to the contact line, for a dewetting velocity above 1-10 mm s(-1) the hydrodynamic theory is able to describe the experimental results for all surfactant concentrations. At slower velocities an additional steep decrease of the contact angle with velocity was observed. Particle tracking velocimetry showed that the flow profiles do not differ with and without surfactant on a scales >100 μm.

  11. Hydrogels of sodium alginate in cationic surfactants: Surfactant dependent modulation of encapsulation/release toward Ibuprofen. (United States)

    Jabeen, Suraya; Chat, Oyais Ahmad; Maswal, Masrat; Ashraf, Uzma; Rather, Ghulam Mohammad; Dar, Aijaz Ahmad


    The interaction of cetyltrimethylammoium bromide (CTAB) and its gemini homologue (butanediyl-1,4-bis (dimethylcetylammonium bromide), 16-4-16 with biocompatible polymer sodium alginate (SA) has been investigated in aqueous medium. Addition of K2CO3 influences viscoelastic properties of surfactant impregnated SA via competition between electrostatic and hydrophobic interactions. Viscosity of these polymer-surfactant systems increases with increase in concentration of K2CO3, and a cryogel is formed at about 0.5M K2CO3 concentration. The thermal stability of gel (5% SA+0.5M K2CO3) decreases with increase in surfactant concentration, a minimum is observed with increase in 16-4-16 concentration. The impact of surfactant addition on the alginate structure vis-à-vis its drug loading capability and release thereof was studied using Ibuprofen (IBU) as the model drug. The hydrogel with 16-4-16 exhibits higher IBU encapsulation and faster release in comparison to the one containing CTAB. This higher encapsulation-cum-faster release capability has been related to micelle mediated solubilization and greater porosity of the hydrogel with gemini surfactant.

  12. Synthesis and bio-physicochemical properties of amide-functionalized N-methylpiperazinium surfactants. (United States)

    Chauhan, Vinay; Singh, Sukhprit; Mishra, Rachana; Kaur, Gurcharan


    Four new amide functionalized N-methylpiperazinium amphiphiles having tetradecyl, hexadecyl alkyl chain lengths and counterions; chloride or bromide have been synthesized and characterized by various spectroscopic techniques. These new surfactants have been investigated in detail for their self-assembling behavior by surface tension, conductivity and fluorescence measurements. The thermodynamic parameters of these surfactants indicate that micellization is exothermic and entropy-driven. The dynamic light scattering (DLS) and transmission electron microscopy (TEM) experiments have been performed to insight the aggregate size of these cationics. Thermal degradation of these new surfactants has also been evaluated by thermal gravimetric analysis (TGA). These new surfactants form stable complexes with DNA as acknowledged by agarose gel electrophoresis, ethidium bromide exclusion and zeta potential measurements. They have also been found to have low cytotoxicity by MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay on the C6 glioma cell line.

  13. Removal of cationic surfactant (CTAB from aqueous solution on to activated carbon obtained from corncob.

    Directory of Open Access Journals (Sweden)

    S. M. Yakout


    Full Text Available Direct and indirect releases of large quantities of surfactants to the environment may result in serious health and environmental problems. Therefore, surfactants should be removed from water before water is released to the environment or delivered for public use. Using powdered activated carbon (PAC as adsorbent may be an effective technique to remove surfactants. In this study, the removal of surfactants by PAC was investigated and the influencesof the operating parameters on the effectiveness on adsorption rate were studied. Cationic surfactant, Cetyl trimethyl ammonium bromide (CTAB was selected for the experiments. A series of batch experiments were performed to determine the sorption isotherms of surfactants to PAC. The results showed that carbon structure affect mainly on the surfactant adsorption. Surfactant equilibrium data fitted very well to the binary langmuir model. The pseudo first-,second- order and intraparticle diffusion kinetic models were applied. Both, the external mass transfer and intraparticle diffusion mechanisms involve in CTAB sorption.

  14. Micellization of monomeric and poly-ω-methacryloyloxyundecyltrimethylammonium surfactants. (United States)

    FitzGerald, Paul A; Chatjaroenporn, Khwanrat; Zhang, Xiaoli; Warr, Gregory G


    We have used small-angle neutron scattering to study how micelle morphology of the tail-polymerizable surfactants MUTAB and MUTAC (ω-methacryloyloxyundecyltrimethylammonium bromide and chloride) is affected by classic self-assembly modifiers such as temperature changes, salt addition, and counterion exchange, as a function of their conversion from monomer into polymer amphiphile in aqueous solution. Contrary to common assumptions about polymerized surfactants, these systems remain in dynamic equilibrium under all conditions examined and at all conversions (except for a small amount of high-molecular-weight precipitation by MUTAC). Counterintuitively, the polymerized methacrylate backbone has little influence on aggregate morphology, except for the formation of rod-like mixed micelles of polymerized and unpolymerized surfactant at intermediate conversions. The addition of salt produces a transition to rod-like micelles at all conversions except in the unpolymerized surfactant, which has some characteristics of an asymmetric bolaform surfactant and retains its spheroidal geometry under almost all conditions.

  15. Kinetics and mechanism of the oxidation of substituted benzylamines by cetyltrimethylammonium permanganate

    Indian Academy of Sciences (India)

    Raghvendra Shukla; Pradeep K Sharma; László Kótai; Kalyan K Banerji


    Oxidation of meta- and para-substituted benzylamines by cetyltrimethylammonium permanganate (CTAP) to the corresponding aldimines is first order with respect to both the amine and CTAP. Oxidation of deuteriated benzylamine (PhCD2NH2) exhibited the presence of a substantial kinetic isotope effect (/ = 5.60 at 293 K). This confirmed the cleavage of an -C-H bond in the ratedetermining step. Correlation analyses of the rates of oxidation of 19 monosubstituted benzylamines were performed with various single and multiparametric equations. The rates of the oxidation showed excellent correlations in terms of Yukawa-Tsuno and Brown’s equations. The polar reaction constants are negative. The oxidation exhibited an extensive cross-conjugation, in the transition state, between the electron-donating substituents and the reaction centre. A mechanism involving a hydride-ion transfer from the amine to CTAP in the rate-determining step has been proposed.

  16. Characterization of the nanostructure of complexes formed by single- or double-stranded oligonucleotides with a cationic surfactant. (United States)

    Liu, Xiaoyang; Abbott, Nicholas L


    We report the use of dynamic light scattering (DLS), small-angle neutron scattering (SANS), and small-angle X-ray scattering (SAXS) to characterize the nanostructure of complexes formed by either single- or double-stranded oligonucleotides with a cationic surfactant (cetyltrimethylammonium bromide, CTAB) in aqueous solution (1 mM Li(2)SO(4)). For single-stranded oligonucleotides 5'-A(20)-3' and 5'-CCCCATTCTAGCAGCCCGGG-3', both the appearance of two Bragg peaks (at 0.14 and 0.28 Å(-1)) in SAXS spectra with a spacing of 1:2 and form factor fits to SANS spectra are consistent with the presence of multilamellar vesicles (with, on average, 6-9 layers with a periodicity of 45-48 Å). Some samples showed evidence of an additional Bragg peak (at 0.20 Å(-1)) associated with periodic packing (with a periodicity of 31 Å) of the oligonucleotides within the lamellae of the nanostructure. The nucleotide composition of the single-stranded oligonucleotides was also found to impact the number and size of the complexes formed with CTAB. In contrast to 5'-A(20)-3' and 5'-CCCCATTCTAGCAGCCCGGG-3', 5'-T(20)-3' did not change the state of aggregation of CTAB (globular micelles) over a wide range of oligonucleotide:CTAB charge ratios. These results support the proposition that hydrophobic interactions, as well as electrostatics, play a central role in the formation of complexes between cationic amphiphiles and single-stranded oligonucleotides and thus give rise to nanostructures that depend on nucleotide composition. In contrast to the single-stranded oligonucleotides, for double-stranded oligonucleotides mixed with CTAB, three Bragg peaks (0.13, 0.23, and 0.25 Å(-1)) in SAXS spectra with a spacing ratio of 1:√3:√4 and characteristic changes in SANS spectra indicate formation of a hexagonal nanostructure. Also, the composition of the double-stranded oligonucleotides did not measurably impact the nanostructure of complexes formed with CTAB, suggesting that electrostatic

  17. Complexation between Sodium Poly(styrenesulfonate) and Alkyltrimethylammonium Bromides in the Presence of Dodecyl Maltoside. (United States)

    Fegyver, Edit; Mészáros, Róbert


    In the present paper, the impact of dodecyl maltoside (C12G2) on the association of sodium poly(styrenesulfonate) (PSS) with dodecyl- and hexadecyltrimethylammonium bromides (DTAB and CTAB) was studied. A low amount of nonionic surfactant enhances the binding of the investigated cationic amphiphiles on PSS, reducing the cationic surfactant-to-polyanion ratio needed for charge neutralization and precipitation. This effect is more pronounced for DTAB than for CTAB due to the considerably higher free surfactant concentration of the former cationic amphiphile. The synergistic surfactant binding also affects the nonequilibrium features of PSS/CTAB association via enhancing the kinetically stable concentration range of overcharged polyion/surfactant nanoparticle dispersions. With increasing C12G2 concentration, however, an opposite effect of the uncharged additive dominates. Namely, the CTAB molecules are solubilized excessively into mixed surfactant micelles, which reduces the surface charge of the PSS/CTAB/C12G2 nanoparticles and thus destabilizes their dispersion. At appropriately large nonionic surfactant concentrations, the binding of CTAB is largely reduced, resulting in the redissolution of the precipitate. In contrast, neither the destabilization nor the resolubilization effects of the added dodecyl maltoside were observed for the PSS/DTAB system due to the much lower driving force of DTAB binding compared to CTAB. Our results clearly demonstrate that the alkyl chain length of the ionic amphiphile has a pronounced effect on both the equilibrium and nonequilibrium aspects of polyion/mixed surfactant complexation which might be further exploited in various next generation applications.

  18. Novel mixed metal Ag(I)-Sb(III)-metallotherapeutics of the NSAIDs, aspirin and salicylic acid: Enhancement of their solubility and bioactivity by using the surfactant CTAB. (United States)

    Gkaniatsou, E I; Banti, C N; Kourkoumelis, N; Skoulika, S; Manoli, M; Tasiopoulos, A J; Hadjikakou, S K


    The already known Ag(I)-Sb(III) compound of the formula {Ag(Ph3Sb)3(NO3)} (1) and two novel mixed metal Ag(I)-Sb(III) metallotherapeutics of the formulae {Ag(Ph3Sb)3(SalH)}(2) and {Ag(Ph3Sb)3(Asp)}(3) (SalH2=salicylic acid, AspH=aspirin or 2-acetylsalicylic acid and Ph3Sb=triphenyl antimony(III)) have been synthesised and characterised by m.p., vibrational spectroscopy (mid-FT-IR), (13)C-,(1)H-NMR, UV-visible (UV-vis) spectroscopic techniques, high resolution mass spectroscopy (HRMS) and X-ray crystallography. Compounds 1,-3 were treated with the surfactant cetyltrimethylammonium bromide (CTAB) in order to enhance their solubility and as a consequence their bioactivity. The resulting micelles a-c were characterised with X-ray powder diffraction (XRPD) analysis, X-ray fluorescence (XRF) spectroscopy, Energy-dispersive X-ray spectroscopy (EDX), conductivity, Thermal gravimetry-differential thermal analysis (TG-DTA), and atomic absorption. Compounds 1-3 and the relevant micelles a-c were evaluated for their in vitro cytotoxic activity against human cancer cell lines: MCF-7 (breast, estrogen receptor (ER) positive), MDA-MB-231 (breast, ER negative) and MRC-5 (normal human fetal lung fibroblast cells) with sulforhodamine B (SRB) colorimetric assay. The results show significant increase in the activity of micelles compared to that of the initial compounds. Moreover, micelles exhibited lower activity against normal cells than tumor cells. The binding affinity of a-c towards the calf thymus (CT)-DNA, lipoxygenase (LOX) and glutathione (GSH) was studied by the fluorescent emission light and UV-vis spectroscopy.

  19. Iodide Impurities in Hexadecyltrimethylammonium Bromide (CTAB) Products: Lot−Lot Variations and Influence on Gold Nanorod Synthesis

    NARCIS (Netherlands)

    Rayavarapu, Raja Gopal; Ungureanu, Constantin; Krystec, Petra; Leeuwen, van Ton G.; Manohar, Srirang


    Recent reports [Smith and Korgel Langmuir 2008, 24, 644−649 and Smith et al.Langmuir 2009, 25, 9518−9524] have implicated certain hexadecyltrimethylammonium bromide (CTAB) products with iodide impurities, in the failure of a seed-mediated, silver and surfactant-assisted growth protocol, to produce g

  20. Compatibilization of HDPE/agar biocomposites with eutectic-based ionic liquid containing surfactant


    Shamsuri, AA; Daik, R; Zainudin, ES; Tahir, PM


    In this research, eutectic-based ionic liquid specifically choline chloride/glycerol was prepared at a 1:2 mole ratio. The choline chloride/glycerol was added with the different content of surfactant (hexadecyltrimethylammonium bromide). The choline chloride/glycerol-hexadecyltrimethylammonium bromide was introduced into high-density polyethylene/agar biocomposites through melt mixing. The mechanical testing results indicated that the impact strength and tensile extension of the biocomposites...

  1. Thermally cleavable surfactants (United States)

    McElhanon, James R.; Simmons, Blake A.; Zifer, Thomas; Jamison, Gregory M.; Loy, Douglas A.; Rahimian, Kamyar; Long, Timothy M.; Wheeler, David R.; Staiger, Chad L.


    Two new surfactant molecules are reported which contain thermally labile Diels-Alder adducts connecting the polar and non-polar sections of each molecule. The two surfactants possess identical non-polar dodecyl tail segments but exhibit different polar headgroups. The surfactants become soluble in water when anionic salts are formed through the deprotonation of the surfactant headgroups by the addition of potassium hydroxide. When either surfactant is exposed to temperature above about C., the retro Diels-Alder reaction occurs, yielding hydrophilic and hydrophobic fragments and the aqueous solutions of the surfactants subsequently exhibit loss of all surface-active behavior.

  2. Thermally cleavable surfactants

    Energy Technology Data Exchange (ETDEWEB)

    McElhanon, James R. (Manteca, CA); Simmons, Blake A. (San Francisco, CA); Zifer, Thomas (Manteca, CA); Jamison, Gregory M. (Albuquerque, NM); Loy, Douglas A. (Albuquerque, NM); Rahimian, Kamyar (Albuquerque, NM); Long, Timothy M. (Urbana, IL); Wheeler, David R. (Albuquerque, NM); Staiger, Chad L. (Albuquerque, NM)


    Two new surfactant molecules are reported which contain thermally labile Diels-Alder adducts connecting the polar and non-polar sections of each molecule. The two surfactants possess identical non-polar dodecyl tail segments but exhibit different polar headgroups. The surfactants become soluble in water when anionic salts are formed through the deprotonation of the surfactant headgroups by the addition of potassium hydroxide. When either surfactant is exposed to temperature above about C., the retro Diels-Alder reaction occurs, yielding hydrophilic and hydrophobic fragments or the aqueous solutions of the surfactants subsequently exhibit loss of all surface-active behavior.

  3. Thermally cleavable surfactants

    Energy Technology Data Exchange (ETDEWEB)

    McElhanon, James R. (Manteca, CA); Simmons, Blake A. (San Francisco, CA); Zifer, Thomas (Manteca, CA); Jamison, Gregory M. (Albuquerque, NM); Loy, Douglas A. (Albuquerque, NM); Rahimian, Kamyar (Albuquerque, NM); Long, Timothy M. (Urbana, IL); Wheeler, David R. (Albuquerque, NM); Staiger, Chad L. (Albuquerque, NM)


    Two new surfactant molecules are reported which contain thermally labile Diels-Alder adducts connecting the polar and non-polar sections of each molecule. The two surfactants possess identical non-polar dodecyl tail segments but exhibit different polar headgroups. The surfactants become soluble in water when anionic salts are formed through the deprotonation of the surfactant headgroups by the addition of potassium hydroxide. When either surfactant is exposed to temperature above about C., the retro Diels-Alder reaction occurs, yielding hydrophilic and hydrophobic fragments or the aqueous solutions of the surfactants subsequently exhibit loss of all surface-active behavior.

  4. Bromide in some coastal and oceanic waters of India

    Digital Repository Service at National Institute of Oceanography (India)

    DeSouza, F.P.; Dalal, V.N.K.

    Bromide concentration and bromide/chlorinity ratio are estimated in coastal waters of Goa, Minicoy Lagoon, Western Arabian Sea and Western Bay of Bengal. The influence of precipitation and river runoff on bromide and bromide/chlorinity ratio...

  5. Viscoelasticity Enhancement of Surfactant Solutions Depends on Molecular Conformation: Influence of Surfactant Headgroup Structure and Its Counterion. (United States)

    Lutz-Bueno, Viviane; Pasquino, Rossana; Liebi, Marianne; Kohlbrecher, Joachim; Fischer, Peter


    During the anisotropic growth from globular to wormlike micelles, the basic interactions among distinct parts of the surfactant monomer, its counterion, and additives are fundamental to tune molecular self-assembly. We investigate the addition of sodium salicylate (NaSal) to hexadecyltrimethylammonium chloride and bromide (CTAC and CTAB), 1-hexadecylpyridinium chloride and bromide (CPyCl and CPyBr), and benzyldimethylhexadecylammonium chloride (BDMC), which have the same hydrophobic tail. Their potential to enhance viscoelasticity by anisotropic micellar growth upon salt addition was compared in terms of (i) the influence of the headgroup structure, and (ii) the influence of surfactant counterion type. Employing proton nuclear magnetic resonance ((1)H NMR), we focused on the molecular conformation of surfactant monomers in the core and polar shell regions of the micelles and their interactions with increasing concentration of NaSal. The viscoelastic response was investigated by rotational and oscillatory rheology. We show that micellar growth rates can be tuned by varying the flexibility and size of the surfactant headgroup as well as the dissociation degree of the surfactant counterion, which directly influences the strength of headgroup-counterion pairing. As a consequence, the morphological transitions depend directly on charge neutralization by electrostatic screening. For example, the amount of salt necessary to start the rodlike-to-wormlike micelle growth depends directly on the number of dissociated counterions in the polar shell.

  6. Effect of alkyl length of cationic surfactants on desorption of Cs from contaminated clay

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Bo Hyun; Park, Chan Woo; Yang, Hee Man; Seo, Bum Kyoung; Lee, Kune Woo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Park, So Jin [Chungnam National University, Daejeon (Korea, Republic of)


    In this study, desorption characteristics of Cs from clay according to the hydrophobic alkyl chain length of the cationic surfactant were investigated. Alkyltrimethylammonium bromide was used as a cationic surfactant, and the length of the hydrophobic alkyl chain of the cationic surfactant was varied from –octyl to –cetyl. The adsorbed amount of the cationic surfactant on montmorillonite increased with the length of the hydrophobic alkyl chain, and intercalation of the cationic surfactant into the clay interlayer increased the interlayer distances. The Cs removal efficiency was also enhanced with increasing alkyl chain length, and the cationic surfactant with the cetyl group showed a maximum Cs removal efficiency of 99±2.9%.

  7. Structure of DNA-Cationic Surfactant Complexes at Hydrophobically Modified and Hydrophilic Silica Surfaces as Revealed by Neutron Reflectometry

    DEFF Research Database (Denmark)

    Cardenas Gomez, Marite; Wacklin, Hanna; Campbell, Richard A.


    In this article, we discuss the structure and composition of mixed DNA-cationic surfactant adsorption layers on both hydrophobic and hydrophilic solid surfaces. We have focused on the effects of the bulk concentrations, the surfactant chain length, and the type solid surface on the interfacial...... layer structure (the location, coverage, and conformation the e DNA and surfactant molecules). Neutron reflectometry is the technique of choice for revealing the surface layer structure by means of selective deuteration. We start by studying the interfacial complexation of DNA...... with dodecyltrimethylammonium bromide (DTAB) and hexadecyltrimethylammonium bromide (CTAB) on hydrophobic surfaces, where we show that DNA molecules are located on top of a self-assembled surfactant monolayer, with the thickness of the DNA layer and the surfactant DNA ratio determined by the surface coverage of the underlying...

  8. Adsorption of mixed cationic-nonionic surfactant and its effect on bentonite structure. (United States)

    Zhang, Yaxin; Zhao, Yan; Zhu, Yong; Wu, Huayong; Wang, Hongtao; Lu, Wenjing


    The adsorption of cationic-nonionic mixed surfactant onto bentonite and its effect on bentonite structure were investigated. The objective was to improve the understanding of surfactant behavior on clay mineral for its possible use in remediation technologies of soil and groundwater contaminated by toxic organic compounds. The cationic surfactant used was hexadecylpyridinium bromide (HDPB), and the nonionic surfactant was Triton X-100 (TX100). Adsorption of TX100 was enhanced significantly by the addition of HDPB, but this enhancement decreased with an increase in the fraction of the cationic surfactant. Part of HDPB was replaced by TX100 which decreased the adsorption of HDPB. However, the total adsorbed amount of the mixed surfactant was still increased substantially, indicating the synergistic effect between the cationic and nonionic surfactants. The surfactant-modified bentonite was characterized by Brunauer-Emmett-Teller specific surface area measurement, Fourier transform infrared spectroscopy, and thermogravimetric-derivative thermogravimetric/differential thermal analyses. Surfactant intercalation was found to decrease the bentonite specific surface area, pore volume, and surface roughness and irregularities, as calculated by nitrogen adsorption-desorption isotherms. The co-adsorption of the cationic and nonionic surfactants increased the ordering conformation of the adsorbed surfactants on bentonite, but decreased the thermal stability of the organobentonite system.

  9. Surfactant-assisted UV-photolysis of nitroarenes. (United States)

    Diehl, Claude A; Jafvert, Chad T; Marley, Karen A; Larson, Richard A


    Photochemical transformations (lambda-254 nm) of 2,4-dinitrotoluene (2,4-DNT) in aqueous solutions containing the cationic surfactant cetyltrimethylammonium (CTA) and the anionic nucleophile borohydride (BH4-) were investigated. The overall decay rate was enhanced at CTA concentrations above the critical micelle concentration (cmc) when stoichiometric excess BH4- was present in solution. A kinetic model that separates the overall reaction rate into micellar and aqueous pseudo-phase components indicates transformation in micelles is 17 times faster that in the homogeneous water phase under those conditions investigated. Intermediate products were identified by comparing the HPLC retention times and ultraviolet-visible absorption spectra of product peaks to those of analytical standards. 2-Methyl-5-nitroaniline, 4-nitrotoluene, 2-nitrotoluene, 4-methyl-3-nitroaniline, 2,4-diaminotoluene, o-toluidine, 1,3-dinitrobenzene, 3-nitroaniline, p-cresol, and 2,4-diaminophenol were identified as photo-transformation intermediates or products.

  10. Surfactant effect on functionalized carbon nanotube coated snowman-like particles and their electro-responsive characteristics

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Ke; Liu, Ying Dan [Department of Polymer Science and Engineering, Inha University, Incheon 402-751 (Korea, Republic of); Choi, Hyoung Jin, E-mail: [Department of Polymer Science and Engineering, Inha University, Incheon 402-751 (Korea, Republic of)


    The core–shell structured snowman-like (SL) microparticles coated by functionalized multi-walled carbon nanotube (MWNT) were prepared in the presence of different surfactants including cationic surfactant-cetyl trimethylammonium bromide (CTAB) and anionic surfactant-sodium lauryl sulfate (SDS). The effect of surfactants on adsorption onto SL particles was characterized by scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and conductivity. The cationic surfactant is found to be more effective than anionic surfactant for helping nanotube adsorbed onto microparticle due to the presence of electrostatic interaction between the functionalized MWNT and the surfactant. Furthermore, the MWNT/SL particles dispersed in silicone oil exhibited a typical fibril structure of the electrorheological characteristics under an applied electric field observed by an optical microscope (OM), in which the state of nanotubes wrapped on the particles strongly affects their electro-responsive characteristics.

  11. Effect of the head-group geometry of amino acid-based cationic surfactants on interaction with plasmid DNA. (United States)

    Jadhav, Vaibhav; Maiti, Souvik; Dasgupta, Antara; Das, Prasanta Kumar; Dias, Rita S; Miguel, Maria G; Lindman, Björn


    The interaction between DNA and different types of amino acid-based cationic surfactants was investigated. Particular attention was directed to determine the extent of influence of surfactant head-group geometry toward tuning the interaction behavior of these surfactants with DNA. An overview is obtained by gel retardation assay, isothermal titration calorimetry, fluorescence spectroscopy, and circular dichroism at different mole ratios of surfactant/DNA; also, cell viability was assessed. The studies show that the surfactants with more complex/bulkier hydrophobic head group interact more strongly with DNA but exclude ethidium bromide less efficiently; thus, the accessibility of DNA to small molecules is preserved to a certain extent. The presence of more hydrophobic groups surrounding the positive amino charge also gave rise to a significantly lower cytotoxicity. The surfactant self-assembly pattern is quite different without and with DNA, illustrating the roles of electrostatic and steric effects in determining the effective shape of a surfactant molecule.

  12. Thermodynamics of micellization of hexadecyltrimethylammonium bromide in propylene glycol-water mixture: A conductivity study

    Directory of Open Access Journals (Sweden)

    Janošević-Ležaić Aleksandra M.


    Full Text Available Micellization of hexadecyltrimethylammonium bromide (syn. cetyltrimethylammonium bromide, CTAB in propylene glycol-water (30% v/v binary mixture, as well as the thermodynamic properties of the resulting micelles, were investigated by electrical conductivity measurements. The conductivity data were used to determine both the critical micellar concentration (CMC and the micellar ionization degree (α of CTin the temperature range 298.2-310.2 K. The equilibrium model of micelle formation was applied in order to obtain the thermodynamic parameters (the standard molar Gibbs free energy, ΔGm0, enthalpy, ΔHm0 and entropy, ΔSm0 of the micellization process. The values of DGm0 and DHm0 were found to be negative at all investigated temperatures, while the values of ΔSm0 were positive and became more positive as temperature increased. A linear dependence between ΔSm0 and ΔHm0, i.e. an enthalpy-entropy compensation effect, was observed. [Projekat Ministarstva nauke Republike Srbije, br. 172015

  13. 十六烷基三甲基季铵阳离子改良二氧化硅对酸性染料的吸着%Sorption of Acid Dyes onto Silica Modified with Cetyltrimethylammonium Cations

    Institute of Scientific and Technical Information of China (English)


    The sorption behavior of acid dyes onto cetyltrimethylammonium bromide (CTAB)- modified silica as a function of pH in the aqueous medium was studied. Single- and multi-solute sorption equilibria of orange Ⅱ(OR),phenol red (PR) and Eriochrome Black T (EBT) were studied at pH 3, unbuffered water pH and pH 11. Sorption behavior of EBT could not be conducted at pH 3 due to its aggregation in acidic medium. All the reaction conditions,experimental protocols and techniques remained the same throughout the sorption process. Sorption isotherms for single-solute system were fitted by the Langmuir model, while Langmuir competitive model (LCM) and the ideal adsorbed solution theory (IAST) coupled with Langmuir model (IAST/Langmuir) were used for the prediction of multisolute competitive sorption. Sorption affinities influenced by the factors like physical interactive forces between the molecules of CTA on silica and sorbate, structural limitations of the dyes based on their geometrical arrangement were investigated. Sorption affinity of OR was found to be higher than that of EBT and PR at all the pH values investigated. Magnitude of the sorption capacities was observed to be higher in acidic medium but lower in alkaline medium. Trends of the sorption affinities in multisolute system were similar to those in single-solute system but magnitude of the sorption capacities was significantly reduced due to the prevailing competition among the sorbates.

  14. Small angle neutron scattering study of mixed micelles of oppositely charged surfactants

    Indian Academy of Sciences (India)

    J V Joshi; V K Aswal; P S Goyal


    Structures of mixed micelles of oppositely charged surfactants dodecyltrimethylammonium bromide (DTAB) and sodium dodecyl sulphate (SDS) have been studied using small angle neutron scattering. The concentration of one of the components was kept fixed (0.3 M) and that of another varied in the range 0 to 0.1 M. The aggregation number and micellar size increase and fractional charge decreases dramatically with the addition of small amount of oppositely charged surfactant. The effect of addition of SDS on DTAB is significantly different from that of the addition of DTAB on SDS. The contrast variation SANS experiments using deuterated surfactant suggests the homogeneous mixing of two components in mixed micellar system.

  15. Adsorption of mixed cationic-nonionic surfactant and its effect on bentonite structure

    Institute of Scientific and Technical Information of China (English)

    Yaxin Zhang; Yan Zhao; Yong Zhu; Huayong Wu; Hongtao Wang; Wenjing Lu


    The adsorption of cationic-nordonic mixed surfactant onto bentonite and its effect on bentonite structure were investigated.The objective was to improve the understanding of surfactant behavior on clay mineral for its possible use in remediation technologies of soil and groundwater contaminated by toxic organic compounds.The cationic surfactant used was hexadecylpyridinium bromide(HDPB),and the nonionic suffactant was Triton X-100(TX100).Adsorption of TX100 was enhanced significantly by the addition of HDPB,but this enhancement decreased with an increase in the fraction of the cationic surfactant.Part of HDPB was replaced by TX100 which decreased the adsorption of HDPB.However,the total adsorbed amount of the mixed surfactant was still increased substantially,indicating the synergistic effect between the cationic and nonionic surfactants.The surfactant-modified bentonite was characterized by Brunauer-Emmett-Teller specific surface area measurement,Fourier transform infrared spectroscopy,and thermogravimetric-derivative thermogravimetric/differential thermal analyses.Surfactant intercalation was found to decrease the bentonite specific surface area,pore volume,and surface roughness and irregularities,as calculated by nitrogen adsorption-desorption isotherms.The co-adsorption of the cationic and nonionic surfactants increased the ordering conformation of the adsorbed surfactants on bentonite,but decreased the thermal stability of the organobentonite system.

  16. Study on aqueous two-phase systems of the mixture SDS/CTAB surfactants

    Institute of Scientific and Technical Information of China (English)

    LI Ying; CHEN Yah-ming; ZHAO Kong-shuang; Takumi HIKIDA


    The phenomenon of two dilute aqueous phases composed of sodium dodecylsulfate (SDS) and cetyltrimethyl ammonium bromide(CTAB) was investigated under various conditions such as concentrations and molarratios of the two surfactants, the addition of sodium chloride and temperature. Vesicles formation was found in theboth phases by TEM image.

  17. Postdeposition dispersion of aerosol medications using surfactant carriers. (United States)

    Marcinkowski, Amy L; Garoff, Stephen; Tilton, Robert D; Pilewski, Joseph M; Corcoran, Timothy E


    Inhaled aerosol drugs provide a means of directly treating the lungs; however, aerosol deposition and drug distribution can be nonuniform, especially in obstructive lung disease. We hypothesize that surfactant-based aerosol carriers will disperse medications over airway surfaces after deposition through surface tension driven flows, increasing dose uniformity and improving drug distribution into underventilated regions. We considered saline and surfactant aerosol delivery via cannula onto several model airway surfaces including porcine gastric mucus (PGM) and both cystic fibrosis (CF) and non-CF human bronchial epithelial cells (HBEs). Fluorescent dye and microspheres (d = 100 nm, 1 mum) were used to qualitatively and quantitatively assess postdeposition dispersion. Aerosol volume median diameters were in the 1-4 mum range. The tested surfactants included sodium dodecyl sulfate (SDS), cetyl trimethyl ammonium bromide (CTAB), tyloxapol, and calfactant. All surfactants tested on PGM (tyloxapol, calfactant, SDS, and CTAB) significantly increased dispersion area versus saline with all markers (2-20-fold increases; all p surfactants tested on CF HBEs (tyloxapol and calfactant) significantly increased dispersion area versus saline with all markers (1.6-4.1-fold increases; all p Surfactant carriers enhanced dispersion after aerosol deposition onto model airway surfaces, and may improve the efficacy of inhaled preparations such as inhaled antibiotics for cystic fibrosis.

  18. n-Dodecylammonium bromide monohydrate

    Directory of Open Access Journals (Sweden)

    Wenyan Dan


    Full Text Available In the title compound, C12H28N+·Br−·H2O, the ionic pairs formed by n-dodecylammonium cations and bromide anions are arranged into thick layers; these layers are linked in a nearly perpendicular fashion [the angle between the layers is 85.84 (5°] by hydrogen-bonding interactions involving the water molecules. The methylene part of the alkyl chain in the cation adopts an all-trans conformation. In the crystal structure, molecules are linked by intermolecular N—H...Br, O—H...Br and N—H...O hydrogen bonds.

  19. Vapour-liquid equilibrium relationship between toluene and mixed surfactants. (United States)

    Tian, Senlin; Li, Yingjie; Mo, Hong; Ning, Ping


    Micellar partitioning of volatile organic compounds (VOCs) in surfactant solutions and its effects on vapour-liquid equilibrium is fundamental to the overall design and implementation ofsurfactant-enhanced remediation. Knowledge of the vapour-liquid equilibrium partitioning coefficients for VOCs, especially in contaminated soils and groundwater in which they exist, is required. Headspace experiments were performed to quantify the effect of three mixed surfactants, cetyltrimethyl ammonium bromide (CTMAB) with tetrabutylammonium bromide (TBAB), sodium dodecyl sulphate (SDS) with Triton X-405 (TX405), and CTMAB with Triton X-100 (TX100), on the apparent Henry's constants (Hc) of toluene at temperatures ranging from 25 degrees C to 40 degrees C. The Hc values were significantly reduced in the presence of all three mixed surfactants at concentrations above their critical micelle concentrations (CMC). Mixed micellar partitioning, showing effects on the vapour-liquid equilibrium of toluene, was primarily responsible for the significant reduction of Hc in their mixed systems. The mixed surfactants CTMAB-TX100 had the greatest effect on Hc above the CMC, followed by SDS-TX405, then CTMAB-TBAB. Mixed systems of CTMAB-TX100 decreased Hc at concentrations significantly lower than the SDS-TX405 and CTMAB-TBAB concentrations, because of to the lower CMC of CTMAB-TX100. Vapour-liquid equilibrium data were also tested against the model (Hc = H/(1 + K(X - CMC)) that described the partitioning of VOCs in vapour-water-micelle phases. The correlation of Hc with mixed surfactant concentrations (X) and CMC can be utilized as an effective tool to predict the Hc by mixed surfactants.

  20. Surfactants in tribology

    CERN Document Server

    Biresaw, Girma


    Surface science and tribology play very critical roles in many industries. Manufacture and use of almost all consumer and industrial products rely on the application of advanced surface and tribological knowledge. The fourth in a series, Surfactants in Tribology, Volume 4 provides an update on research and development activities connecting surfactants and tribological phenomena. Written by renowned subject matter experts, the book demonstrates how improved design of surfactants can be harnessed to control tribological phenomena. Profusely illustrated and copiously referenced, the chapters also


    Institute of Scientific and Technical Information of China (English)

    P.M. Saville; J.W. White


    Polymeric surfactants are amongst the most widespread of all polymers. In nature, proteins and polysaccharides cause self organization as a result of this surfactancy; in industry, polymeric surfactants play key roles in the food, explosives and surface coatings sectors. The generation of useful nano- and micro-structures in films and emulsions as a result of polymer amphiphilicity and the application of mechanical stress is discussed. The use of X-ray and neutron small angle scattering and reflectivity to measure these structures and their dynamic properties will be described. New results on linear and dendritic polymer surfactants are presented.

  2. Dendrimer-surfactant interactions. (United States)

    Cheng, Yiyun; Zhao, Libo; Li, Tianfu


    In this article, we reviewed the interactions between dendrimers and surfactants with particular focus on the interaction mechanisms and physicochemical properties of the yielding dendrimer-surfactant aggregates. In order to provide insight into the behavior of dendrimers in biological systems, the interactions of dendrimers with bio-surfactants such as phospholipids in bulk solutions, in solid-supported bilayers and at the interface of phases or solid-states were discussed. Applications of the dendrimer-surfactant aggregates as templates to guide the synthesis of nanoparticles and in drug or gene delivery were also mentioned.

  3. Conversion of Alcohols to Bromides by Trimethylsilane and lithium Bromide in Acetone

    Institute of Scientific and Technical Information of China (English)

    Wei Feng; Zhang Xiao-xia; Zhang Qing; Wang Ji-yu; Chen Dai-mo


    Conversion of alcohols to alkyl bromides is one of the most frequently used functional group transformation reactions. Phosphorus tribromide is one of the most popular classical reagents.Triphenylphosphine has been used in combination with bromine,carbon tetrabromide,N-halo imides and other bromide compounds as a mild reagents for the preparation of alkyl bromides.More reacently, halotrimethylsilanes were found to be useful for halogenation of alcohols. George A.Olah successfully converted alcohols to bromides with chlorotrimethylsilane/lithium bromide in acetonitrile. But in our research, we found that we got no bromides but methylation products when we planed to convered our substances to bromides according to Gerge's method. We did some experiments, and we found that when the substituent group in the 2-N was donor group,we got the methylation products,but when it was acceptor group,the bromide could be got.(Scheme 1).Then we did some experiments with several other solvents, we found excitedly that when the solvent was acetone ,the bromides could be got even the substituent group was donor.(Scheme 2).When we changed the substances to normal alcohols ,such as ethyl alcohol,benzyl alcohol,isopropyl alcohol and 3,4-dimethoxy benzyl alcohol,we also got the bromides.In conclusion, we found a simple method to convert alcohols to bromides with trimethylsilane/li thium bromide in acetone,which was better than Geroge's method.

  4. Surfactant Sector Needs Urgent Readjustment

    Institute of Scientific and Technical Information of China (English)

    Huang Hongzhou


    @@ Surfactant industrial system has been basically established After 50 years' development, China has already established a surfactant industrial system with a relatively complete product portfolio and can produce 4714 varieties of surfactants in cationic,anionic, nonionic and amphoteric categories.

  5. Kinetic Study of the Effect of Selected Surfactants on Corrosion of Copper

    Directory of Open Access Journals (Sweden)

    Howaida M. El-Kashlan


    Full Text Available The rates of copper corrosion were determined by measuring the limiting current of anodic dissolution of copper in phosphoric acid in presence and in absence of cetyl trimethyl ammonium bromide (CTAB and cetyl pyridinium bromide (CPYB. The rate of corrosion is found to decrease by increasing the concentration of the surfactant. The percentage of inhibition ranged from 1.85 to 33.97% depending on the type of surfactant and its concentration. Increasing the copper electrode height, and concentration of H3PO4 decreases the rate of copper corrosion. The investigated adsorption isotherms indicate that the two surfactants fit Langmuir and Flory Huggins isotherm. The thermodynamic parameters show that corrosion is a diffusion controlled process. The dimensional analysis method was used to obtain the overall mass transfer correlations under the study conditions.

  6. Synthesis of organic rectorite with novel Gemini surfactants for copper removal

    Energy Technology Data Exchange (ETDEWEB)

    Han, Guocheng; Han, Yang [State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510640 (China); Wang, Xiaoying, E-mail: [State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510640 (China); Liu, Shijie, E-mail: [State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510640 (China); Department of Paper and Bioprocess Engineering, State University of New York, College of Environmental Science and Forestry, 1 Forestry Drive, Syracuse, NY 13210 (United States); Sun, Runcang [State Key Laboratory of Pulp and Paper Engineering, South China University of Technology, Guangzhou 510640 (China); China Beijing Key Laboratory of Lignocellulosic Chemistry, Beijing Forestry University, Beijing 100083 (China)


    Graphical abstract: Three Gemini surfactants showed stronger rapid intercalation capacity into rectorite and behaved better on Cu{sup 2+} removal than two single-chain surfactants, which were positive to their increasing amount and chain length. - Highlights: • Modification of rectorite (REC) with several surfactants was performed in 1 h. • The arrangement of Gemini surfactants in REC layers was discussed. • All ORECs displayed better adsorption capacities on Cu{sup 2+} than pure REC. • Gemini-REC behaved better than single-chain surfactant modified REC on Cu{sup 2+} removal. • The adsorption capacity was positive to the amount and chain length of surfactant. - Abstract: Three novel Gemini surfactants were used to prepare organic rectorite (OREC) under microwave irradiation, in comparison with single-chain surfactant ester quaternary ammonium salt (EQAS) and cetyltrimethyl ammonium bromide (CTAB). The structure and morphology of OREC were characterized by XRD, BET, FT-IR, TEM and TGA. The removal of Cu{sup 2+} on OREC from aqueous solution was performed. The results reveal that Gemini surfactants modified REC had larger interlayer distance and higher surface area than single-chain surfactants EQAS and CTAB, and the increasing amount or chain length of Gemini surfactants led to larger layer spacing and higher adsorption capacities. The adsorption behavior of Gemini surfactant modified REC can be better described by Freundlich adsorption isotherm model, with a maximum adsorption capacity of 15.16 mg g{sup −1}. The desorption and regeneration experiments indicate good reuse property of Gemini modified REC adsorbent. Therefore, this study may widen the utilization of Gemini surfactants modified layered silicates.


    Surfactants are one of the most widely applied materials by consumers and industry. The application areas for surfactants span from everyday mundane tasks such as cleaning, to highly complex processes involving the formulation of pharmaceuticals, foods, pesticides, lubricants, etc. Even though sur...

  8. Dynamic covalent surfactants

    NARCIS (Netherlands)

    Minkenberg, C.B.


    In this thesis the development of surfactant aggregates with fast exchange dynamics between the aggregated and non-aggregated state is described. Dynamic surfactant exchange plays an important role in natural systems, for instance in cell signaling, cell division, and uptake and release of cargo. Re

  9. Pharmacological studies on otilonium bromide. (United States)

    Giachetti, A


    Otilonium bromide (OB) is a quaternary ammonium compound characterized by a long aliphatic chain. Its chemical properties are responsible for both a poor penetration in CNS and a prolonged binding to cell membranes. OB is a spasmolytic agent which acts by modifying Ca++ fluxes from extra and intracellular sites. It has been documented that iv administration (10 mg/kg) of OB causes a marked reduction of colonic motility lasting from 2 to 3 hours, whereas an inhibition of upper GI motor activity is present only at higher dosages. In conclusion, OB seems to exert its activity mainly on distal GI tract, and its spasmolytic effect may be due to its ability to inhibit Ca++ fluxes and to a direct action of the drug on the contractile proteins of the smooth muscle.

  10. Compatibilization of HDPE/agar biocomposites with eutectic-based ionic liquid containing surfactant

    CERN Document Server

    Shamsuri, AA; Zainudin, ES; Tahir, PM


    In this research, eutectic-based ionic liquid specifically choline chloride/glycerol was prepared at a 1:2 mole ratio. The choline chloride/glycerol was added with the different content of surfactant (hexadecyltrimethylammonium bromide). The choline chloride/glycerol-hexadecyltrimethylammonium bromide was introduced into high-density polyethylene/agar biocomposites through melt mixing. The mechanical testing results indicated that the impact strength and tensile extension of the biocomposites increased with the introduction of the choline chloride/glycerol-hexadecyltrimethylammonium bromide. The scanning electron microscope, differential scanning calorimetry and thermal gravimetric analysis results exhibited that significant decrease in the number of agar fillers pull-out, melting point and thermal decomposition temperatures of the biocomposites are also due to the choline chloride/glycerol-hexadecyltrimethylammonium bromide. The Fourier transform infrared spectra and X-ray diffractometer patterns of the bioc...

  11. Effect of Combined Pollution of Aluminium(Al3+) and Cationic Surfactant(CTAB) on Maize Seedlings%Al3+和阳离子型表面活性剂复合污染对玉米幼苗的影响

    Institute of Scientific and Technical Information of China (English)

    束良佐; 朱育晓


    研究了阳离子型表面活性剂十六烷基三甲基溴化铵(CTAB)和Al3+共存,对玉米幼苗保护酶及叶绿素含量、光合速率、蒸腾速率等的影响。结果表明:CTAB能加剧Al3+对玉米幼苗的毒害作用。具体表现为使幼苗超氧化物歧化酶和过氧化物酶活性升高,过氧化氢酶活性下降,超氧阴离子产生速率增大,脂质过氧化作用加剧,质膜透性上升,而叶绿素含量下降。当CTAB浓度在临界胶束浓度以上时,光合速率及蒸腾速率急剧降低。%The effects of the co-existing of cetyltrimethylammonium bromide(CTAB),a kind of cationic surfactant and Aluminium(Al3+) on maize seedlings were studied.The results showed that CTAB could intensify the toxic effect of Aluminium on maize seedlings.The activities of protective enzymes,such as superoxide dismutase(SOD) and peroxidase(POD),increasing gradually,but activities of catalase(CAT) decreased,the generating rate of superoxide ions increased markedly,and so did membrane lipid peroxidation and plasma membrane permeability of the maize seedlings,however,the content of chlorophyll decreased.When the concentration of CTAB reached 1.0 cmc(critical micelle concentration),the photosynthesis rate and transpiration rate of the seedling dropped drastically.

  12. Enhanced degradation of carbon tetrachloride by surfactant-modified zero-valent iron

    Institute of Scientific and Technical Information of China (English)

    MENG Ya-feng; GUAN Bao-hong; WU Zhong-biao; WANG Da-hui


    Sorption of carbon tetrachloride (CT) by zero-valent iron (ZVI) is the rate-limiting step in the degradation of CT, so the sorption capacity of ZVI is of great importance. This experiment was aimed at enhancing the sorption of CT by ZVI and the degradation rate of CT by modification of surfactants. This study showed that ZVI modified by cationic surfactants has favorable synergistic effect on the degradation of CT. The CT degradation rate of ZVI modified by cetyl pyridinium bromide (CPB) was higher than that of the unmodified ZVI by 130%, and the CT degradation rate of ZVI modified by cetyl trimethyl ammonium bromide (CTAB) was higher than that of the unmodified ZVI by 81%. This study also showed that the best degradation effect is obtained at the near critical micelle concentrations (CMC) and that high loaded cationic surfactant does not have good synergistic effect on the degradation due to its hydrophilicity and the block in surface reduction sites. Furthermore degradation of CT by ZVI modified by nonionic surfactant has not positive effect on the degradation as the ionic surfactant and the ZVI modified by anionic surfactant has hardly any obvious effects on the degradation.

  13. Partition and water/oil adsorption of some surfactants. (United States)

    Tadmouri, Rawad; Zedde, Chantal; Routaboul, Corinne; Micheau, Jean-Claude; Pimienta, Véronique


    Adsorption isotherms have been determined at the water/oil interface for five biphasic systems involving surfactants (non-ionic and ionic) present in both phases at partition equilibrium. The systems studied were polyoxyethylene(23)lauryl ether (Brij35) in water/hexane and four ionic surfactants, hexadecyltrimethylammonium bromide (CTAB), and a series of three tetraalkylammonium dodecylsulfate (TEADS, TPADS, and TBADS) in water/CH 2Cl 2. Interfacial tension measurements performed at the water/air and water/oil interfaces provided all the necessary information for the determination of the adsorption parameters by taking partition into account. These measurements also allowed the comparison of the adsorption properties at both interfaces which showed an increase of the adsorption equilibrium constant and a decrease of the maximum surface concentration at the water/oil interface compared to water/air. The values of the critical aggregation concentration showed, in all cases, that only the surfactant dissolved in the aqueous phase contribute to the decrease of the water/oil interfacial tension. In the case of the four ionic surfactants, the critical aggregation concentration obtained in biphasic conditions were lowered because of the formation of mixed surfactant-CH 2Cl 2 aggregates.

  14. Surfactants in the environment. (United States)

    Ivanković, Tomislav; Hrenović, Jasna


    Surfactants are a diverse group of chemicals that are best known for their wide use in detergents and other cleaning products. After use, residual surfactants are discharged into sewage systems or directly into surface waters, and most of them end up dispersed in different environmental compartments such as soil, water or sediment. The toxic effects of surfactants on various aquatic organisms are well known. In general, surfactants are present in the environment at levels below toxicity and in Croatia below the national limit. Most surfactants are readily biodegradable and their amount is greatly reduced with secondary treatment in wastewater treatment plants. The highest concern is the release of untreated wastewater or wastewater that has undergone primary treatment alone. The discharge of wastewater polluted with massive quantities of surfactants could have serious effects on the ecosystem. Future studies of surfactant toxicities and biodegradation are necessary to withdraw highly toxic and non-biodegradable compounds from commercial use and replace them with more environmentally friendly ones.

  15. Pulmonary surfactant and lung transplantation

    NARCIS (Netherlands)

    Erasmus, Michiel Elardus


    Pulmonary surfactant lowers the surface tension at the air-water interface inside the alveolus. This is achieved by adsorption of surfactant phospholipids at the air-water interface, a process controlled by surfactant-associated proteins, such as SP-A. In this way, surfactant prevents collapse of th

  16. New multifunctional surfactants from natural phenolic acids. (United States)

    Centini, Marisanna; Rossato, Maria Sole; Sega, Alessandro; Buonocore, Anna; Stefanoni, Sara; Anselmi, Cecilia


    Several new multifunctional molecules derived from natural sources such as amino acids and hydroxycinnamic acids were synthesized. They exhibit various activities such as emulsifying, UV-protecting, and radical scavenging, thereby conforming to the latest requirements for cosmetic ingredients. The synthesis comprises only a few steps: (i) the amino acid, the acid groups of which are protected by esterification, is coupled with ferulic or caffeic acid; (ii) the p-hydroxyl group of the cinnamic derivative reacts with dodecyl bromide in the presence of potassium carbonate (the resulting compounds are highly lipophilic and tested as water/oil (W/O) emulsifiers); (iii) these molecules, by deprotonating the acid groups of the amino acids, with successive salification, are more hydrophilic, with stronger O/W emulsifying properties. The new multifunctional surfactants might prove useful for the treatment of multiple skin conditions, including loss of cellular antioxidants, damage from free radicals, damage from UV, and others.

  17. Surfactant media for constant-current coulometry. Application for the determination of antioxidants in pharmaceuticals

    Energy Technology Data Exchange (ETDEWEB)

    Ziyatdinova, Guzel, E-mail: [Analytical Chemistry Department, A.M. Butlerov Institute of Chemistry, Kazan (Volga Region) Federal University, Kremlyevskaya, 18, Kazan 420008 (Russian Federation); Ziganshina, Endzhe; Budnikov, Herman [Analytical Chemistry Department, A.M. Butlerov Institute of Chemistry, Kazan (Volga Region) Federal University, Kremlyevskaya, 18, Kazan 420008 (Russian Federation)


    Highlights: Black-Right-Pointing-Pointer Applicability of surfactants in constant-current coulometry is shown for the first time. Black-Right-Pointing-Pointer Reactions of antioxidants with electrogenerated titrants in surfactant media are investigated. Black-Right-Pointing-Pointer Water insoluble antioxidants can be determined in water media with addition of surfactants. Black-Right-Pointing-Pointer Coulometric determination of antioxidants in pharmaceutical dosage forms using surfactants media is developed. - Abstract: Effect of surfactant presence on electrochemical generation of titrants has been evaluated and discussed for the first time. Cationic (1-dodecylpyridinium and cetylpyridinium bromide), anionic (sodium dodecyl sulfate) and nonionic (Triton X100 and Brij{sup Registered-Sign} 35) surfactants as well as nonionic high molecular weight polymer (PEG 4000) do not react with the electrogenerated bromine, iodine and hexacyanoferrate(III) ions. The electrogenerated chlorine chemically interact with Triton X100 and Brij{sup Registered-Sign} 35. The allowable range of surfactants concentrations providing 100% current yield has been found. Chain-breaking low molecular weight antioxidants (ascorbic acid, rutin, {alpha}-tocopherol and retinol) were determined by reaction with the electrogenerated titrants in surfactant media. Nonionic and cationic surfactants can be used for the determination of antioxidants by reaction with the electrogenerated halogens. On contrary, cationic surfactants gives significantly overstated results of antioxidants determination with electrogenerated hexacyanoferrate(III) ions. The use of surfactants in coulometry of {alpha}-tocopherol and retinol provides their solubilization and allows to perform titration in water media. Simple, express and reliable coulometric approach for determination of {alpha}-tocopherol, rutin and ascorbic acid in pharmaceuticals using surfactant media has been developed. The relative standard deviation of the

  18. Temperature Triggered Structural Transitions in Surfactant organized Self Assemblies (United States)

    Rose, J. Linet; Balamurugan, S.; Sajeevan, Ajin C.; Sreejith, Lisa


    Preparation & characterization of tunable fluids is an emerging area with potential application in many fields. Surfactants self assemble in aqueous solution to give a rich variety of phase structures, the size and shape of which can be tuned by additives like salts, alcohols, amines, aromatics etc or external stimuli such as light, temperature etc. The addition of long chain aliphatic alcohol has significant influence on the surfactant aggregation, as it promotes morphological growth of micelles. The cationic surfactant, Cetyl Trimethyl Ammonium Bromide (CTAB) with nonanol in presence of potassium bromide (KBr) shows thermo tunable viscosity behaviour and optical switching behaviour. The solution is visually observed to transform from a turbid and less viscous phase at low temperature to clear and considerably viscous phase at high temperature. Temperature induced changes in turbidity and viscosity are consistent with the transition from vesicle to worm like micelle. It is also worth emphasizing that the transition is thermo reversible, so that vesicles that are disrupted into micelles upon heating can be reformed upon cooling. The thermo tunable transition from turbid to transparent state and the concomitant changes in viscosity are promising for the use in smart windows, monitoring of tumor growth or in other stimuli based application.

  19. Metathesis depolymerizable surfactants (United States)

    Jamison, Gregory M.; Wheeler, David R.; Loy, Douglas A.; Simmons, Blake A.; Long, Timothy M.; McElhanon, James R.; Rahimian, Kamyar; Staiger, Chad L.


    A class of surfactant molecules whose structure includes regularly spaced unsaturation in the tail group and thus, can be readily decomposed by ring-closing metathesis, and particularly by the action of a transition metal catalyst, to form small molecule products. These small molecules are designed to have increased volatility and/or enhanced solubility as compared to the original surfactant molecule and are thus easily removed by solvent extraction or vacuum extraction at low temperature. By producing easily removable decomposition products, the surfactant molecules become particularly desirable as template structures for preparing meso- and microstructural materials with tailored properties.

  20. 2,6-Dimethylpyridinium bromide

    Directory of Open Access Journals (Sweden)

    Salim F. Haddad


    Full Text Available The asymmetric unit of the title salt, C7H10N+·Br−, comprises two 2,6-dimethylpyridinium cations and two bromide anions. One cation and one anion are situated in general positions, while the other cation and the other anion lie on a crystallographic mirror plane parallel to (010. Each pair of ions interact via N—H...Br and C—H...Br hydrogen bonding, generating motifs depending on the cation and anion involved. Thus, the cation and the anion on the mirror plane generate infinite chains along the c axis, while the other ionic pair leads to sheets parallel to the ac plane. In the overall crystal packing, both motifs alternate along the b axis, with a single layer of the chain motif sandwiched between two double layers of the sheet motif. The sheets and chains are further connected via aryl π–π interactions [centroid–centroid distances = 3.690 (2 and 3.714 (2 Å], giving a three-dimensional network.

  1. Desorption of two organophosphorous pesticides from soil with wastewater and surfactant solutions. (United States)

    Hernández-Soriano, M C; Mingorance, M D; Peña, A


    A batch test was used to evaluate the extent of desorption of diazinon and dimethoate, preadsorbed on a calcareous agricultural soil, representative of the Mediterranean area. Urban wastewater from a secondary treatment and seven surfactant solutions, at concentrations ranging from 0.75 mg L(-1) to 10 gL(-1), were used. The surfactants assayed were cationic (hexadecyl trimethyl ammonium bromide (HD)), anionic (sodium dodecyl sulfate (SDS), Aerosol 22 (A22) and Biopower (BP)), and nonionic (Tween 80 (TW), Triton X 100 (TX) and Glucopon 600 (G600)). Desorption of dimethoate was either not affected or only slightly by the nonionic and anionic surfactants tested, while desorption of diazinon from the soil was only enhanced by A22, BP and TW. This desorption increase correlated significantly with the surfactant concentration of the solution used for desorption and with the concurrent increase in the supernatant of the dissolved organic carbon, in particular that originating from the surfactant. This parameter did not vary with the use of SDS, G600 and TX. The cationic surfactant HD was retained on the soil surface, as confirmed by an increase in soil organic carbon, resulting in a fall in desorption rate for both pesticides. Comparing treatment by wastewater with control water, there was no difference in desorption rate for either pesticide. Mixed TW/anionic surfactant solutions either did not modify or slightly increased desorption of both pesticides in comparison with individual surfactant solutions.

  2. Phosphine oxide surfactants revisited. (United States)

    Stubenrauch, Cosima; Preisig, Natalie; Laughlin, Robert G


    This review summarizes everything we currently know about the nonionic surfactants alkyl dimethyl (C(n)DMPO) and alkyl diethyl (C(n)DEPO) phosphine oxide (PO surfactants). The review starts with the synthesis and the general properties (Section 2) of these compounds and continues with their interfacial properties (Section 3) such as surface tension, surface rheology, interfacial tension and adsorption at solid surfaces. We discuss studies on thin liquid films and foams stabilized by PO surfactants (Section 4) as well as studies on their self-assembly into lyotropic liquid crystals and microemulsions, respectively (Section 5). We aim at encouraging colleagues from both academia and industry to take on board PO surfactants whenever possible and feasible because of their broad variety of excellent properties.

  3. Sorption and transport studies of cetyl trimethylammonium bromide (CTAB)and Triton X-100 in clayey soil

    Institute of Scientific and Technical Information of China (English)

    Sivaram Harendra; Cumaraswamy Vipulanandan


    Surfactants are soil washing agents and facilitators for subsurface remediation of hydrocarbon spills.It is important to understand the sorption and transport behavior of surfactants for enhanced soil remediation.The adsorption and desorption isotherms of cetyl trimethylammonium bromide (CTAB) and Triton X-100 with sand and kaolinite have been quantified.Kaolinite clay had the highest sorption capacity compared to blasting sand.Transport parameters such as diffusion coefficient (D) and retardation factor (R) of the above mentioned surfactant solutions were determined in clayey soils (82.5% sand and 17.5% kaolinite mixture) with near zero and 0.1 g/L ionic strength.NaCl was used as the electrolyte solution.Convection-Diffusion equation was used to model the breakthrough curves of the surfactants.Bromide ion was chosen as the tracer material in order to characterize the column.CTAB and Triton X-100 were used to flush the perchloroethylene (PCE) contaminated soil.The effectiveness of CTAB and Triton X-100 in flushing the PCE from the contaminated soil was quantified.

  4. Growth and characterization of lead bromide crystals (United States)

    Singh, N. B.; Gottlieb, M.; Henningsen, T.; Hopkins, R. H.; Mazelsky, R.; Glicksman, M. E.; Coriell, S. R.; Santoro, G. J.; Duval, W. M. B.


    Lead(II) bromide was purified by a combination of directional freezing and zone-refining methods. Differential thermal analysis of the lead bromide showed that a destructive phase transformation occurs below the melting temperature. This transformation causes extensive cracking, making it very difficult to grow a large single crystal. Energy of phase transformation for pure lead bromide was determined to be 24.67 cal/g. To circumvent this limitation, crystals were doped by silver bromide which decreased the energy of phase transformation. The addition of silver helped in achieving the size, but enhanced the inhomogeneity in the crystal. The acoustic attenuation constant was almost identical for the pure and doped (below 3000 ppm) crystals.

  5. Silver Nanoparticles-Based Nano-drop Spectrophotometric Determination of Cationic Surfactants Coupled with Hydrophobic Interaction; An Application to Pharmaceuticals and Environmental

    Directory of Open Access Journals (Sweden)

    Ashima Sharma


    Full Text Available The proposed work describes the nanodrop spectrophotometric determination of cationic surfactants using citrate-modified silver nanoparticles based on the aggregation of silver nanoparticles induced by cationic surfactants due to the hydrophobic effect. The visible color change in the solution of silver nanoparticle includes a red shift with the quenching of the absorption spectra. The maximum absorbance was measured at wavelength,λmax400 nm. The concentrations of cationic surfactants were determined using a nanodrop spectrophotometer with limits of detection of 15.0, 8.0, 6.0, 5.8, and 13.0 µM for dodecyl trimethyl ammonium bromide, myristiltrimethyl ammonium bromide, cetrimoniumtrimethyl ammonium bromide, cetylpyridinium chloride and benzalkonium chloride, respectively. The proposed method was successfully applied for the determination of cetylpyridinium chloride in commercial mouthwasher, gum astringent and nasal spray pharmaceuticals and environmental samples.

  6. Physicochemistry of hexadecylammonium bromide and its methyl and ethanolic head group analogues in buffered aqueous and gelatin solution

    Indian Academy of Sciences (India)

    Debolina Mitra; Satya P Moul


    In this work, the interfacial and bulk behaviour of the amphiphiles hexadecylammonium bromide and its methyl and ethanolic head group analogues in buffered aqueous and gelatin solution has been examined. The analogues are of two categories: the methyl and the combined methyl and ethanolic head group representatives are considered as Group A compounds, and all non-methyl but ethanolic head group species are taken as Group B compounds. Different physical techniques have been employed to ascertain the amphiphilic behaviour in solution. The self-aggregation of these surfactants at different pH has been studied along with pH dependent interfacial activity of gelatin. The interaction of the two categories of the surfactants with gelatin at different pH has been investigated. A scheme for this interaction at various stages of the process has been proposed. The influence of the surfactant head groups on the interaction process has been assessed.

  7. Rapid Synthesis of Glycosyl Bromides by Ultrasound Irradiation

    Institute of Scientific and Technical Information of China (English)

    ZHAO Jin-zhong; ZHANG Xue-qin; WU Xin; XING Ze-bing; YUE Ai-qin; SHAO Hua-wu


    A convenient and environmentally friendly reactor for the synthesis of glycosyl bromides via ultrasound irradiation was designed.Peracetylated glycosyl bromides were synthesized from free saccharides by means of a one-pot method.Benzoylated and 6-subsituted glycosyl bromides were prepared from protected saccharides.The glycosyl bromides were obtained in isolated yields of 83% to 96%.

  8. Surfactant-assisted synthesis of BaTiO3 nanoparticles by micro-emulsion method

    Directory of Open Access Journals (Sweden)

    J. L. Gao


    Full Text Available Barium titanate (BaTiO3 nanoparticles were successfully synthesized by using a surfactant-assisted method. The various processing parameters, namely, th e species of surfactant, reaction temperature and micro-emusion concentration had been varied, and the effects on the micrographs and crystal structure of BaTiO3 particles had been analyzed by scanning electron microscope (SEM, transmission electron microscopy (TEM and X-ray diffraction (XRD. XRD analyses confirming the tetragonal structure of the BaTiO3 nanoparticles using hexadecyl trimethyl ammonium Bromide (CTAB or nonylphenol polyoxyethylene ether (NP-10 as surfactant. The SEM analysis showed that by changing the species of surfactant, grains with different dimensions could be synthesized. TEM analyses indicate that BaTiO3 nanoparticles with 15–20 nm in diameter were successfully synthesized.

  9. Rheologycal properties of sodium carboxymethylcellulose in the presence of electrolyte and mixed micelle of surfactants

    Directory of Open Access Journals (Sweden)

    Sovilj Verica J.


    Full Text Available One of the most significant aspects of polymer-surfactant interaction, from the practical point of view, is that of rheology control and viscosity enhancement. In the oppositely charged polyelectrolyte-surfactant system strong ionic interaction often leads to precipitation of the formed complex yielding serious problems. In this paper the interaction between anionic polyelectrolyte - sodium carboxymethylcellulose (NaCMC and cationic surfactant - cethyltrimethylammonium bromide (CTMAB has been investigated by rheological measurements. Addition of electrolyte NaBr and nonionic surfactant - Tween 80 reduced the binding strength, prevented the precipitation of the complex and increased the viscosity of the system. It was found that rheological properties are strong influenced by NaCMC-CTMAB interaction and the system exhibits either pseudoplastic or thixotropic or rheopectic behavior according to the intensity of interaction.

  10. Voltammetric Determination of Estrogens Based on the Enhancement Effect of Surfactant at Carbon Paste Electrode

    Institute of Scientific and Technical Information of China (English)


    Highly sensitive voltammetric method for the determination of estrogens, based on the enhancement effect of cetyltrimethylammonium bromide (CTAB) has been described. In the presence of CTAB, the oxidation peak currents of estrogens (estradiol, estrone, estriol, estradiol valerate and diethylstilbestrol) at the carbon paste electrode (CPE) increased significantly after open-circuit accumulation. The peak current was proportional to the concentration of estradiol over the range from 5×10-9 to 2.5×10-6 mol\\5L-1. The detection limit was 8×10-10 mol\\5L-1 at 6 min of accumulation. The total amounts of estrogens in the blood serums were determined and the average recovery was 104.92%. Under the conditions used, the electrode process of estradiol was examined and the mechanism for peak current enhancement was also discussed.

  11. Investigation on interaction of DNA and several cationic surfactants with different head groups by spectroscopy, gel electrophoresis and viscosity technologies. (United States)

    Guo, Qing; Zhang, Zhaohong; Song, Youtao; Liu, Shuo; Gao, Wei; Qiao, Heng; Guo, Lili; Wang, Jun


    In this study, the interaction between DNA and several cationic surfactants with different head groups such as ethyl hexadecyl dimethyl ammonium bromide (EHDAB), hexadecyl dimethyl benzyl ammonium chloride (HDBAC), and cetyl pyridinium bromide (CPB) were investigated by UV-vis absorption, fluorescence and circular dichroism (CD) spectroscopy, gel electrophoresis, and viscosity technologies. The results show that these cationic surfactants can interact with DNA and major binding modes are electrostatic and hydrophobic. Also, CPB and HDBAC molecules interact with DNA by partial intercalation, and CPB has slightly stronger intercalation than HDBAC, while EHDAB interacts with DNA by non-intercalation. The different head groups of the surfactant molecules can influence the interaction strength. CPB has the stronger interaction with DNA than the others. Moreover, surfactant concentration, the ratio of DNA and fluorescence probe, ionic strength can influence the interaction. The surfactants may interact with DNA by the competition reactions with BR for DNA-BR. The increase of ionic strength may favor the surface binding between DNA and surfactants to some extent. This work provides deep mechanistic insight on the toxicity of cationic surfactants with different head groups to DNA molecules.

  12. Palladium-catalyzed cross-coupling of cyclopropylmagnesium bromide with aryl bromides mediated by zinc halide additives. (United States)

    Shu, Chutian; Sidhu, Kanwar; Zhang, Li; Wang, Xiao-Jun; Krishnamurthy, Dhileepkumar; Senanayake, Chris H


    The key Pd-catalyzed cross-coupling of aryl bromides or triflates and cyclopropylmagnesium bromide in the presence of substoichiometric amounts of zinc bromide produces cyclopropyl arenes in good to excellent yields. The cross-coupling of other alkyl, cycloalkyl, and aryl Grignard reagents with aryl bromides under the same conditions gives the corresponding substituted arenes in good yields.

  13. Surfactant Assisted Hydrothermal Synthesis of CdSe Nanostructural Materials

    Institute of Scientific and Technical Information of China (English)

    Ganganagappa Nagaraju; Cujjarahalli Thimmanna Chandrappa


    CdSe/CTAB composite nanostructural materials were successfully synthesized at 160-200℃ for 2 days through a facile surfactant (cetyl trimethyl ammonium bromide-CTAB) assisted hydrothermal method us- ing cadmium acetate and sodium selenate as precursor. The obtained products were characterized by X-ray diffraction, energy dispersive X-ray analysis, Fourier transform infrared spectroscopy and thermo gravimetric analysis. Optical properties were studied by photoluminescence and UV-visible spectroscopy and morphology was investigated by scanning electron microscopy.

  14. Solubilization of pentanol by cationic surfactants and binary mixtures of cationic surfactants

    Energy Technology Data Exchange (ETDEWEB)

    Morgan, M.E.


    The research reported here has included studies of the solubilization of pentanol in hexadecylpyridinium chloride (CPC), trimethyletetradecylammonium chloride (C{sub 14}Cl), benzyldimethyltetradecylammonium chloride (C{sub 14}BzCl), benzyldimethylhexadecylpyridinium chloride (C{sub 16}BzCl), hexadecyltrimethylammonium bromide (CTAB), and binary mixtures of CPC + C{sub 16}BzCl and C{sub 14}Cl + C{sub 14}BzCl. Rather than using calorimetric methods, this project will employ headspace chromatography to measure solubilization of pentanol over a wide range of solute concentrations. While not yielding as much thermodynamic data as calorimetry, headspace chromatography is a more direct measure of the extent of solubilization. Using headspace chromatography, is a more direct measure of the extent of solubilization. Using headspace chromatography, this study will seek to determine whether strongly synergistic mixture ratios exist in the case of binary cationic surfactant systems. There are two equilibria in the pentanol-water-surfactant system: (1) The pentanol solubilized in micelles is in equilibrium with the monomeric pentanol in solution, and (2) the monomeric pentanol is in equilibrium with the pentanol in the vapor above the solution. To establish the link between the two equilibria, a sample of the vapor above pure liquid pentanol must be collected, in order to find the activity of pentanol in solution. Also, a calibration curve for various concentrations of pentanol in solution. From this type of data it is possible to infer both the concentration of pentanol solubilized in micelles and the concentrations of pentanol in the ``bulk`` solution outside the micelles. The method is equally applicable to systems containing a single surfactant as well as mixtures of surfactants.

  15. The study of The study of the influence of temperature on surfactants – polyethylene glycol layers The study of the influence of temperature on surfactants – polyethylene glycol layers on liquid-gas interface liquid-gas interfacethe influence of temperature on surfactants – polyethylene glycol layers on liquid-gas interfaceThe study of the influence of temperature on surfactants – polyethylene glycol layers on liquid-gas interface

    Directory of Open Access Journals (Sweden)

    Seryk Boloshaan


    Full Text Available The surface tension of compositions consisting of nonionic polyethylene glycol and surface active substances of different nature and influence of temperatures on properties of their adsorption layers were studied. To be taken into account the basics of classical chemical thermodynamics and colloidal chemistry, the thermodynamic parameters were determined for the adsorption of glycol, cetyl pyridinium bromide, Tween- 80 and sodium dodecyl sulfate. Adsorption speed was valuated By Kinetic curves of a liquid /gas interfaces. As a surfactants were taken the anionic surfactant – sodium dodecylsulphate, cationic surfactant cetylpyridinium bromide and nonionic Tween-80. The reason of using nonionic polyethyleneglycol as polymer is that the polymer is not toxic, biodegradable and it has no harm to the human body. That is why they are largely used in food industry, pharmaceutics, cosmetics and household chemical products.

  16. Preparation of Highly Crystalline TiO2 Nanostructures by Acid-assisted Hydrothermal Treatment of Hexagonal-structured Nanocrystalline Titania/Cetyltrimethyammonium Bromide Nanoskeleton

    Directory of Open Access Journals (Sweden)

    Sakai Hideki


    Full Text Available Abstract Highly crystalline TiO2 nanostructures were prepared through a facile inorganic acid-assisted hydrothermal treatment of hexagonal-structured assemblies of nanocrystalline titiania templated by cetyltrimethylammonium bromide (Hex-ncTiO2/CTAB Nanoskeleton as starting materials. All samples were characterized by X-ray diffraction (XRD and transmission electron microscopy (TEM. The influence of hydrochloric acid concentration on the morphology, crystalline and the formation of the nanostructures were investigated. We found that the morphology and crystalline phase strongly depended on the hydrochloric acid concentrations. More importantly, crystalline phase was closely related to the morphology of TiO2 nanostructure. Nanoparticles were polycrystalline anatase phase, and aligned nanorods were single crystalline rutile phase. Possible formation mechanisms of TiO2 nanostructures with various crystalline phases and morphologies were proposed.

  17. Surfactant-Amino Acid and Surfactant-Surfactant Interactions in Aqueous Medium: a Review. (United States)

    Malik, Nisar Ahmad


    An overview of surfactant-amino acid interactions mainly in aqueous medium has been discussed. Main emphasis has been on the solution thermodynamics and solute-solvent interactions. Almost all available data on the topic has been presented in a lucid and simple way. Conventional surfactants have been discussed as amphiphiles forming micelles and amino acids as additives and their effect on the various physicochemical properties of these conventional surfactants. Surfactant-surfactant interactions in aqueous medium, various mixed surfactant models, are also highlighted to assess their interactions in aqueous medium. Finally, their applied part has been taken into consideration to interpret their possible uses.

  18. Comprehensive study of tartrazine/cationic surfactant interaction. (United States)

    Shahir, Afshin Asadzadeh; Javadian, Soheila; Razavizadeh, Bi Bi Marzieh; Gharibi, Hussein


    Interaction of a food dye, tartrazine, with some cationic conventional and gemini surfactants, tetradecyltrimethylammonium bromide (TTAB), N,N'-ditetradecyl-N,N,N',N'-tetramethyl-N,N'-butanediyl-diammonium dibromide (14,4,14), and N,N'-didodecyl-N,N,N',N'-tetramethyl-N,N'-butanediyl-diammonium dibromide (12,4,12), were first investigated comprehensively employing conductometry, tensiometry, and UV-visible spectroscopy. Tartrazine was found to behave in the same manner as aromatic counterions. The formation of ion pairs reflected as a considerable increase of the surfactant efficiency in tensiometry plots and their stoichiometry were determined by Job's method of continuous variations. For the tartrazine/TTAB system, nonionic DS(3), ionic DS(2-), and/or DS(2)(-) ion pairs, their small premicelles, and tartrazine-rich micelles were constituted as well as dye-containing TTAB-rich micelles. Insoluble J-aggregates of DS(-) ion pairs and cylindrical surfactant-rich micelles were also formed in tartrazine/gemini surfactant systems and recognized by transmission electron microscopy. The zeta potential and the size of the aggregates were determined using dynamic light scattering and confirmed the suggested models for the processes happening in each system. Cyclic voltammetry was applied successfully to track all of these species using tartrazine's own reduction peak current for the first time.

  19. Self-assembling systems based on amphiphilic alkyltriphenylphosphonium bromides: elucidation of the role of head group. (United States)

    Gainanova, Gulnara A; Vagapova, Guzalia I; Syakaev, Victor V; Ibragimova, Alsu R; Valeeva, Farida G; Tudriy, Elena V; Galkina, Irina V; Kataeva, Olga N; Zakharova, Lucia Ya; Latypov, Shamil K; Konovalov, Alexander I


    A systematic study of the aggregation behavior of alkyltriphenylphosphonium bromides (TPPB-n; n=8, 10, 12, 14, 16, 18; here n is the number of carbon atoms in alkyl groups) in aqueous solutions has been carried out and compared with trimethyl ammonium bromides (TMAB-n). Critical micelle concentrations (cmcs) of TPPB-n and TMAB-n decrease with the number of carbon atoms with the slope parameter of ca.0.3. The low cmcs and effective solubilization power toward Orange OT indicate high micellization capacity of phosphonium surfactants. The low counterion binding parameter β is revealed for TPPB-10 and TPPB-12, while high counterion binding of ≥80% is observed for high TPPB-n homologs. Values of the surface potential ψ calculated on the basis of pK(a) shifts of p-nitrophenols is similar for both series and monotonously increase with alkyl chain length. Several points indicate non-monotonic changes within TPPB-n series. There are peculiarities of the tensiometry and solubilization plots for high homologs and above mentioned increases in counterion binding on transiting from low to high molecular weight surfactants. Differences in aggregation behavior between TPPB and TMAB series and between low and high homologs can be due to the specific structural character of the TPP(+) cation, which is supported by X-ray data. Copyright © 2011 Elsevier Inc. All rights reserved.

  20. [Pharmacology of the bronchospasmolytic oxitropium bromide]. (United States)

    Bauer, V R


    The anticholinergic substance (8r)-6 beta, 7 beta-epoxy-8-ethyl-3 alpha-[(-)-tropoyloxyl]-1 alpha H, 5 alpha H-tropanium bromide (oxitropium bromide, Ba 253 BR, Ventilat) is a competitive antagonist of acetylcholine. In vitro, it is many times as effective as atropine. In vivo, oxitropium bromide, following i.v. administration, is also more effective than atropine. Due to its quaternary structure, a central anticholinergic effect cannot be demonstrated. Furthermore, poor enteral resorption is to be expected. Locally administered, as an aqueous aerosol, the effect of the substance is distinctly greater than that of atropine, both in potency and duration of action. This is also true when administered by metered-dose inhaler compared with ipratropium bromide. As, following aerosol administration, the margin between major effect and the most sensitive side-effect is in the ratio 1 : 100, side-effects are unlikely even with marked inhalational overdosage. Oxitropium bromide can be described, therefore, as a preparation free of side-effects which represents in prophylactic use in many cases of obstructive airway disease, an alternative to beta-mimetics and xanthine derivatives.

  1. Organomontmorillonites Modified with 2-Methacryloyloxy Ethyl Alkyl Dimethyl Ammonium Bromide

    Institute of Scientific and Technical Information of China (English)

    WANG Jian-quan; WU Wen-hui


    Organomontmorillonites (organo-MMT) were synthesized by means of montmorillonites (MMT) modified with a series of 2-methacryloyloxy ethyl alkyl dimethyl ammonium bromide (MAAB) having different alkyl chain lengths as cationic surfactants through a cationic exchanging reaction, and were characterized by FTIR, TG, elemental analysis, and XRD. The microenvironment of the organic interlayer such as the orientation and arrangement of the alkyl chains of MAAB, as well as the properties of nanocomposite hydrogels, were also investigated. The amount of organic components absorbed on interlayer and the basal spacing of organo-MMT both increase with the increasing of alkyl length of MAAB. When carbon number of alkyl chain is in the region of 8 to 14, the alkyl chains between layers would adopt a disordered gauche conformation; while the carbon number is 16, an ordered all-trans conformation with a vertical orientation would be found together with the disordered gauche conformation according to the results of XRD and FTIR. Due to the difference of microenvironment of organic interlayer, the Young's moduli of the nanocomposite hydrogels increased as the alkyl chains of MAAB became longer.

  2. Adsorption and desorption of cationic surfactants onto silica from toluene studied by ATR-FTIR. (United States)

    Tabor, Rico F; Eastoe, Julian; Dowding, Peter


    The adsorption and desorption behavior of cationic dialkyldimethylammonium bromide surfactants (Di-CnDABs where n = 10, 12, 14) at the silica-toluene interface has been studied. Adsorption is a rapid process, consistent with transport control, whereas desorption appears to occur in a two-stage process, with varying proportions of surfactant desorbing in fast and slow modes. These proportions appear to be affected by trace moisture present in the adjacent toluene solvent, possibly owing to competition between surfactant and water molecules for surface sites. Surprisingly, the surfactant tail length (n) has a significant impact on solubility in toluene, and this appears to affect bulk-surface partitioning. The results are compared with previous experiments utilizing nonionic surfactants (Tabor, R. F.; Eastoe, J.; Dowding, P. Langmuir 2009, 25, 9785), and also with work on surfactant-stabilized silica in nonpolar solvents (Tabor, R. F.; Eastoe, J.; Dowding, P. J.; Grillo, I.; Heenan, R. K.; Hollamby, M. Langmuir 2008, 24, 12793). Observations are explained in terms of the balance of interactions between the surfactant, solvent, and surface.

  3. Rheological characterization of polysaccharide-surfactant matrices for cosmetic O/W emulsions. (United States)

    Bais, D; Trevisan, A; Lapasin, R; Partal, P; Gallegos, C


    Rheometrical techniques can be profitably used for polysaccharide matrices in order to evaluate their suitability for the preparation of stable cosmetic O/W emulsions. In particular, the rheological properties of aqueous scleroglucan systems were investigated under continuous and oscillatory shear conditions in a polymer concentration range (0.2-1.2% w/w) embracing the sol/gel transition. The effects due to the addition of two different surfactants (up to 10% w/w) were examined at constant polymer concentration (0.4% w/w). The selected additives are a nonionic polymeric siliconic surfactant (dimethicone copolyol) and a cationic surfactant (tetradecyltrimethylammonium bromide), respectively. Polysaccharide-surfactant interactions leading to complex formation were detected also through rheology. The combined action of both nonionic and cationic surfactants in the polymer solution was examined at two different surfactant concentration levels (5 and 10% w/w), demonstrating the beneficial effects produced on the mechanical properties of the polymer matrix by the coexistence of both surfactants. Such beneficial effects are confirmed by the stability and rheology shown by the emulsions prepared. In this way, the results point out the good agreement between the rheology of the continuous phase and the final characteristics of the emulsion obtained.

  4. Phase Separation and Microstructure of Mixed Surfactants Solution Containing Cationic Geminis and Traditional Anionic Surfactant

    Institute of Scientific and Technical Information of China (English)

    尚亚卓; 刘洪来; 胡英


    The properties of aqueous two-phase system (ATPS) of mixed solution containing gemini cationic surfactant trimethylene-l,3-bis(dodecyldimethyl ammonium) bromide (12-3-12, 2Br-) and traditional anionic surfactant sodium dodecyl sulfate (SDS) with or without added salt have been studied. An ATPS is formed in a narrow region of the ternary phase diagram different from that of traditional aqueous cationic-anionic surfactant systems. In ATPS region, the lowest total concentration of surfactants varies with the mixing ratio of geminis to SDS. Photographs obtained from freeze-etching, negative-staining and transmission electron microscopy show that the microstructures of two phases are different from each other. Micelles and vesicles can coexist in a single phase. The addition of salts can change the phase diagram of ATPS. Furthermore, the added salts promote the aggregation of rod-like micelles to form coarse network structure that increase the viscosity of solutions. The negative ions of the added salts are the determining factor.

  5. Utilizing surfactants to control the sorption, desorption, and biodegradation of phenanthrene in soil-water system. (United States)

    Jin, Haiwei; Zhou, Wenjun; Zhu, Lizhong


    An integrative technology including the surfactant enhanced sorption and subsequent desorption and biodegradation of phenanthrene in the soil-water system was introduced and tested. For slightly contaminated agricultural soils, cationic-nonionic mixed surfactant-enhanced sorption of organic contaminants onto soils could reduce their transfer to plants, therefore safe-guarding agricultural production. After planting, residual surfactants combined with added nonionic surfactant could also promote the desorption and biodegradation of residual phenanthrene, thus providing a cost-effective pollution remediation technology. Our results showed that the cationic-nonionic mixed surfactants dodecylpyridinium bromide (DDPB) and Triton X-100 (TX100) significantly enhanced soil retention of phenanthrene. The maximum sorption coefficient Kd of phenanthrene for contaminated soils treated by mixed surfactants was about 24.5 times that of soils without surfactant (Kd) and higher than the combined effects of DDPB and TX100 individually, which was about 16.7 and 1.5 times Kd, respectively. On the other hand, TX100 could effectively remove phenanthrene from contaminated soils treated by mixed surfactants, improving the bioavailability of organic pollutants. The desorption rates of phenanthrene from these treated soils were greater than 85% with TX100 concentration above 2000 mg/L and approached 100% with increasing TX100 concentration. The biodegradation rates of phenanthrene in the presence of surfactants reached over 95% in 30 days. The mixed surfactants promoted the biodegradation of phenanthrene to some extent in 10-22 days, and had no obvious impact on phenanthrene biodegradation at the end of the experiment. Results obtained from this study provide some insight for the production of safe agricultural products and a remediation scheme for soils slightly contaminated with organic pollutants.

  6. [The clinical pharmacological profile of pinaverium bromide]. (United States)

    Guslandi, M


    Pinaverium bromide is a locally acting spasmolytic agent of the digestive tract. Its mechanism of action relies upon inhibition of calcium ion entrance into smooth muscle cells (calcium-antagonist effect). In humans pinaverium facilitates gastric emptying and decreases intestinal transit time in patients with constipation. Pinaverium is very effective in improving symptoms of irritable bowel syndrome (abdominal pain, gas, diarrhea or constipation). In this respect the drug proved to be significantly superior to placebo, at least as effective as trimebutine and on the whole more active than otilonium and prifinium bromide, being always extremely well tolerated.

  7. Sizing up surfactant synthesis. (United States)

    Han, SeungHye; Mallampalli, Rama K


    Phosphatidylcholine is generated through de novo synthesis and remodeling involving a lysophospholipid. In this issue of Cell Metabolism, research from the Shimizu lab (Harayama et al., 2014) demonstrates the highly selective enzymatic behavior of lysophospholipid acyltransferases. The authors present an enzymatic model for phosphatidylcholine molecular species diversification that impacts surfactant formation.

  8. Electrical polarization of lead bromide crystals. I

    NARCIS (Netherlands)

    Schoonman, A.; Macke, A.J.H.


    An attempt was made to measure electronic conductivity in lead bromide in equilibrium with lead, since experimental data on the cell −Pb/PbBr2/C+ in the literature are not consistent with existing theories. Combination of our results with published data for bromine-induced hole conduction in lead br

  9. Electrical polarization of lead bromide crystals. I

    NARCIS (Netherlands)

    Schoonman, A.; Macke, A.J.H.

    An attempt was made to measure electronic conductivity in lead bromide in equilibrium with lead, since experimental data on the cell −Pb/PbBr2/C+ in the literature are not consistent with existing theories. Combination of our results with published data for bromine-induced hole conduction in lead


    Institute of Scientific and Technical Information of China (English)


    The interaction of poly(ethylene oxide)(PEO)with the ionic surfactants,sodium dodecylsulfate(SDS)and cetyltrimethylammonium chloride(CTAC)respectively,in aqueous solutions containing a certain concentration of NH4Cl,is studied by the viscosity measurement.It has been found that the ion-dipole interaction between PEO and ionic surfactants is changed considerably by the organic salt.For anionic surfactant of SDS,the addition of NH4Cl into solution strengthens the interaction between PEO and the headgroup of SDS.On the other hand,for cationic surfactant of CTAC,the interaction between PEO and the headgroup of CTAC is screened significantly by NH4Cl dissolved in solution.These findings may potentially be attributed to the negative property of the oxygen group of the PEO chain.In the presence of NH4Cl,the cationic ions of the organic salt bind to the oxygen group of the PEO chain so that PEO can be referred to as a pseudopolyelectrolyte in solution.

  11. A comparison of the action of otilonium bromide and pinaverium bromide: study conducted under clinical control. (United States)

    Defrance, P; Casini, A


    We studied 40 patients with irritable bowel syndrome (IBS) which received in a simple-blind fashion otilonium and pinaverium bromide (15 days each drug). During each 15-day period we evaluated: number of pain episodes, intensity of pain, number of bowel movements, side effects. Otilonium bromide, (OB), compared with pinaverium bromide was able to significantly (p less than 0.05) reduce the number of pain attacks, whereas no significant differences were found between the 2 groups as regards the other parameters. The occurrence of side effects was similar in the two treatment courses. We can conclude that the two types of treatment were similarly useful in IBS, although OB seems more effective than pinaverium bromide.

  12. 21 CFR 522.275 - N-Butylscopolammonium bromide. (United States)


    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false N-Butylscopolammonium bromide. 522.275 Section 522....275 N-Butylscopolammonium bromide. (a) Specifications. Each milliliter of solution contains 20 milligrams (mg) N-butylscopolammonium bromide. (b) Sponsor. See No. 000010 in § 510.600(c) of this chapter...


    Institute of Scientific and Technical Information of China (English)


    Interactions of collagen fibres (made from Beef Achilles tendons )with sodium dodecyl sulfate (SDS),sodium dodecylbenzene sulfonate (SDBS),cetylpyridinium bromide(CPB)and Igepal CA-720 were studied.Sorptions isotherms of all ionic surfactants under different reaction conditions were found out.At suitable conditions S-isotherms were obtained,while under isoeletric conditions isotherms were logaritmic.Igepal had no sorption.The interaction of surfactants with collagen is connected with its mass changes. Changes depend on reaction conditions,namely pH and ionic strenght of reaction solution.Degree of swelling(αm)was used for the description of these changes.At pH=3,in absence SDBS and under low ionic strenghts,a high swelling was attained.An addition of SDBS to reaction mixture led to vigerous deswelling and when the bound amount of SDBS reached about 1 mmol.g-1 αm became independent on a futher bound SDBS.With higher ionic strenghts αm was independent on the equilibrium bound amount of SDBS.Under isoeletric conditions changes of αm were markedly smaller than in acid region and had the opposite character.%研究了十二烷基硫酸钠(SDS)、二十烷基苯磺酸钠(SDBS)、溴化十六烷基吡啶翁(CPB)和Igepal CA-720等表面活性剂与胶原(来源于牛跟腱)间的相互作用.发现了不同的反应条件下,上述离子性表面活性剂的吸附等温线,得到了适当条件下的吸附等温线,同时发现在等电条件下等温线呈对数关系,Igepal没有吸附.表面活性剂与胶原的作用情况与其质量的变化是相互关联的,这种变化取决于反应条件,即pH值和反应溶液中的离子强度,胶原的膨胀程度(am)被用来描述这种变化.在pH3.0,无SDBS存在且在低的离子强度下,胶原得到了大的膨胀:加入SDBS将会导致强烈的消肿作用,并且当胶原对SDBS的结合量达到1mmol/g时,am的值将不再随SDBS结合量的进一步增加而变化.在高的离子

  14. Discrepancies over the onset of surfactant monomer aggregation interpreted by fluorescence, conductivity and surface tension methods

    Directory of Open Access Journals (Sweden)

    Maria de Fátima Carvalho Costa


    Full Text Available Molecular probe techniques have made important contributions to the determination of microstructure of surfactant assemblies such as size, stability, micropolarity and conformation. Conductivity and surface tension were used to determine the critical aggregation concentration (cac of polymer-surfactant complexes and the critical micellar concentration (cmc of aqueous micellar aggregates. The results are compared with those of fluorescent techniques. Several surfactant systems were examined, 1-butanol-sodium dodecylsulfate (SDS mixtures, solutions containing poly(ethylene oxide-SDS, poly(vinylpyrrolidone-SDS and poly(acrylic acid-alkyltrimethylammonium bromide complexes. We found differences between the cac and cmc values obtained by conductivity or surface tension and those obtained by techniques which use hydrophobic probe.

  15. Pseudo Peak Phenomena in Micellar Electrokinetic Capillary Chromatography by Using Ionic Surfactant

    Institute of Scientific and Technical Information of China (English)


    The origin of pseudo peak was studied by means of micellar electrokinetic capillary chromatography with cetyltrimethylaminium bromide as the pseudo stationary phase. It has been pointed that two peaks may appear for one component under certain conditions. Experiments showed that the relative areas of the two peaks of analyte depended on the time and the temperature of reaction between analyte and surfactant, and the concentration of surfactant in the sample solution. It means that the interaction between the analyte and the surfactant is a slow process, and a stable substance can be produced from the interaction. It is the substance and the analyte that may lead to the formation of two peaks. The fast interaction mechanism between the solute and the micellar should be queried from the experiment result.

  16. Surfactant-assisted sol-gel synthesis of forsterite nanoparticles as a novel drug delivery system. (United States)

    Hassanzadeh-Tabrizi, S A; Bigham, Ashkan; Rafienia, Mohammad


    In the present study, forsterite nanoparticles were synthesized via surfactant-assisted sol-gel method using cetyltrimethyl ammonium bromide (CTAB) as a surfactant. The effects of CTAB contents and heat treatment on the textural properties and drug release from nanoparticles were investigated. The synthesized powders were studied by X-ray diffraction, Fourier transform infrared spectra, Brunauer-Emmett-Teller surface area analysis and transmission electron microscope images. Mg2SiO4 materials demonstrated mesoporous characteristics and large specific surface area ranging from 159 to 30 m(2)/g. The TEM results showed that forsterite nanorods had diameters about 4 nm and lengths ranging from 10 to 60 nm. It was found that the samples with 6g CTAB show slower drug release rate than the other specimens, which is due to smaller pore size. This study revealed that the drug delivery of forsterite can be tailored by changing the amount of surfactant.

  17. Removal of Hg (II and Mn (II from aqueous solution using nanoporous carbon impregnated with surfactants

    Directory of Open Access Journals (Sweden)

    Mansoor Anbia


    Full Text Available Mesoporous carbons were impregnated with the anionic and cationic surfactants to increase adsorbing capacity for heavy metal ions. Prepared samples were characterized by X-ray diffraction (XRD and nitrogen adsorption–desorption isotherms. Batch adsorption studies were carried out to study the effect of various parameters like contact time, pH, metal ion concentration and agitation speed. The mercury removal by cationic surfactant cetyltrimethyl ammonium bromide (CTAB, anionic surfactant sodium dodecyl sulfate (SDS modified mesoporous carbon and unmodified mesoporous carbon were found to be 94%, 81.6% and 54.5%, respectively while the manganese removal for these adsorbents were found to be 82.2%, 70.5% and 56.8%, respectively. The sorption data were fit better with the Langmuir adsorption isotherm than Freundlich isotherm.


    Institute of Scientific and Technical Information of China (English)

    Noor Rehman; Abbas Khan; Iram Bibi; Mohammad Siddiq


    The interactions of non-ionic amphiphilic diblock copolymer poly(oxyethylene/oxybutylene) (E39B18) with anionic surfactant sodium dodecyl sulphate (SDS) and cationic surfactant hexadecyltrimethylammonium bromide (CTAB) were studied by using various techniques such as surface tension,conductivity,steady-state fluorescence and dynamic light scattering.Surface tension measurements were used to determine the critical micelle concentration (CMC) and thereby the free energy of micellization (AGmic),free energy of adsorption (AGads),surface excess concentration (F) and minimum area per molecule (A).Conductivity measurements were used to determine the critical micelle concentration (CMC),critical aggregation concentration (CAC),polymer saturation point (PSP),degree of ionization (α) and counter ion binding (β).Dynamic light scattering experiments were performed to check the changes in physiochemical properties of the block copolymer micelles taken place due to the interactions of diblock copolymers with ionic surfactants.The ratio of the first and third vibronic peaks (I1/I13) indicated the polarity of the pyrene micro environment and was used for the detection of micelle as well as polymer-surfactant interactions.Aggregation number (N),number of binding sites (n) and free energy of binding (AGb) for pure surfactants as well as for polymer-surfactant mixed micellar systems were determined by the fluorescence quenching method.

  19. Surfactant induced complex formation and their effects on the interfacial properties of seawater. (United States)

    Guzmán, Eduardo; Santini, Eva; Benedetti, Alessandro; Ravera, Francesca; Ferrari, Michele; Liggieri, Libero


    The effect of a cationic surfactant, hexadecyltrimethylammonium bromide (CTAB), on the interfacial properties of seawater has been studied by dynamic and equilibrium surface tension and by dilational rheology essays. Important modifications of the surface tension and dilational rheology response have been observed already at the very low CTAB concentrations, where the effects due to the high ionic strength are negligible. The comparison with the effects of CTAB in different seawater models, or in natural seawater fractions, points out the establishment of strong interactions between the surfactant molecules and the lipophilic fraction of organic material dispersed/dissolved in seawater, affecting the interfacial activity of the molecules. Considering the biochemical richness of seawater, these results can be explained assuming interaction mechanisms and adsorption schemes similar to those speculated for protein and other macromolecules in the presence of surfactants, which in fact show similar features. Thus already at the low concentrations the surfactant molecules form highly surface-active complexes with part of the organic fraction of seawater. At the larger surfactant concentrations these complexes compete for adsorption with an excess of free CTAB molecules which, according to the thermodynamic conditions, are most favoured to occupy the liquid interface. The results of this study underline the important role of the sea organic content in enhancing the surface-activity of surfactants, which is relevant for a deeper understand of the direct and indirect effects of these types of pollutants on the physico-chemical environment in the sea coastal areas and develop mitigation strategies.

  20. 40 CFR 180.123 - Inorganic bromide residues resulting from fumigation with methyl bromide; tolerances for residues. (United States)


    ... on dog food, resulting from fumigation with methyl bromide. (ii) 125 parts per million for residues... PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.123 Inorganic bromide residues resulting from... residues of inorganic bromides (calculated as Br) in or on the following food commodities which have been...


    Directory of Open Access Journals (Sweden)

    Pirog T. Р.


    Full Text Available The review is devoted to surface-active glycolipids. The general characteristics, the physiological role of the rhamnolipids, trehalose lipids, sophorolipids, mannosylerythritol lipids and their traditional producers — the representatives of the genera Pseudozyma, Pseudomonas, Rhodococcus and Candida are given. The detailed analysis of the chemical structure, the stages of the biosynthesis and the regulation of some low molecular glycolipids are done. The own experimental data concerning the synthesis intensification, the physiological role and the practical use of Rhodococcus erythropolis IMV Ac-5017, Acinetobacter calcoaceticus IMV B-7241 and Nocardia vaccinii IMV B-7405 surfactants, which are a complex of the glyco-, phospho-, amino- and neutral lipids (glycolipids of all strains are presented by trehalose mycolates are summarized. It was found that R. erythropolis IMV Ac-5017, A. calcoaceticus IMV B-7241 and N. vaccinii IMV B-7405 surfactants have protective, antimicrobial and antiadhesive properties. It was shown that R. erythropolis IMV Ac-5017, A. calcoaceticus IMV B-7241 and N. vaccinii IMV B-7405 surfactants preparation of cultural liquid intensified the degradation of oil in water due to the activation of the natural petroleum-oxidizing microflora.


    Directory of Open Access Journals (Sweden)

    T. P. Pirog


    Full Text Available The classification and the chemical structure of the lipopeptides and their producers (bacteria of the genera Bacillus and Pseudomonas are given. The role of the lipopeptides in cells motility, biofilm formation, metal binding and xenobiotics degradation and their action on the cells of pro- and eukaryotes is summarized. The stages of the nonribosomal lipopeptides synthesis and the role of two-component (GacA/GacS, ComA/ComP and the quorum system regulation of this process are shown. The potential of lactic acid bacteria and marine microorganisms as alternative surfactants producers (glycolipids, lipopeptides, phospholipids and fatty acids, glycolipopeptides are discussed. Their productivity and advantages over traditional producers are given as well. The properties of surfactants synthesized by lactic acid bacteria (the reduction of the surface tension, the critical micelle concentration, the stability in a wide range of pH, the temperature, the biological activity are summarized. Surfactants of nonpathogenic probiotic bacteria could be used as effective antimicrobial agents and antiadhesive and marine producers which able to synthesize unique metabolites that are not produced by other microorganisms.

  3. Surfactants at the Design Limit. (United States)

    Czajka, Adam; Hazell, Gavin; Eastoe, Julian


    This article analyzes how the individual structural elements of surfactant molecules affect surface properties, in particular, the point of reference defined by the limiting surface tension at the aqueous cmc, γcmc. Particular emphasis is given to how the chemical nature and structure of the hydrophobic tails influence γcmc. By comparing the three different classes of surfactants, fluorocarbon, silicone, and hydrocarbon, a generalized surface packing index is introduced which is independent of the chemical nature of the surfactants. This parameter ϕcmc represents the volume fraction of surfactant chain fragments in a surface film at the aqueous cmc. It is shown that ϕcmc is a useful index for understanding the limiting surface tension of surfactants and can be useful for designing new superefficient surfactants.

  4. Investigation of thermodynamic parameters of cetyl pyridinium bromide sorption onto ZSM-5 and natural clinoptilolite[Thermodynamic properties; Sorption; Cetyl pyridinium bromide; ZSM-5 and natural clinoptilolite

    Energy Technology Data Exchange (ETDEWEB)

    Ghiaci, M. E-mail:; Kia, R.; Kalbasi, R.J


    A study was undertaken to determine the influence of temperature and surfactant concentration on the adsorption of cetyl pyridinium bromide on two ZSM-5 zeolites, and on natural clinoptilolite. The effect of temperature on adsorption and thermodynamic properties was investigated by making measurements at (297, 303, 307, 313) K. The results show that the calculated curves from the general isotherm equation can represent the experimental data very well up to T=313 K. Based on the calculation of the thermodynamics of adsorption, it is evident that the principle contribution to the {delta}G{sup compfn}{sub hm} of negative value is the large positive value of {delta}S{sup compfn}{sub hm} (36 to 52 J {center_dot} mol{sup -1}), whereas {delta}H{sup compfn}{sub hm} is positive and in the range of 1 to 7 kJ {center_dot} mol{sup -1}. Therefore, similar to the micellisation in bulk solution, the second step of surfactant adsorption is an entropy-driven process.

  5. Micellization Behavior of Long-Chain Substituted Alkylguanidinium Surfactants

    Directory of Open Access Journals (Sweden)

    Roza Bouchal


    Full Text Available Surface activity and micelle formation of alkylguanidinium chlorides containing 10, 12, 14 and 16 carbon atoms in the hydrophobic tail were studied by combining conductivity and surface tension measurements with isothermal titration calorimetry. The purity of the resulting surfactants, their temperatures of Cr→LC and LC→I transitions, as well as their propensity of forming birefringent phases, were assessed based on the results of 1H and 13C NMR, differential scanning calorimetry (DSC, and polarizing microscopy studies. Whenever possible, the resulting values of Krafft temperature (TK, critical micelle concentration (CMC, minimum surface tension above the CMC, chloride counter-ion binding to the micelle, and the standard enthalpy of micelle formation per mole of surfactant (ΔmicH° were compared to those characterizing alkyltrimethylammonium chlorides or bromides with the same tail lengths. The value of TK ranged between 292 and 314 K and increased strongly with the increase in the chain length of the hydrophobic tail. Micellization was described as both entropy and enthalpy-driven. Based on the direct calorimetry measurements, the general trends in the CMC with the temperature, hydrophobic tail length, and NaCl addition were found to be similar to those of other types of cationic surfactants. The particularly exothermic character of micellization was ascribed to the hydrogen-binding capacity of the guanidinium head-group.

  6. Synthesis of Mesoporous Titania with Surfactant and its Characterization

    Directory of Open Access Journals (Sweden)

    T. Benkacem


    Full Text Available A mesoporous titania was obtained by gelation from Ti-alkoxide in acidic solutions with addition of surfactant cetyltrimetylammonium bromide (CH3(CH215N(CH33Br using a sol-gel process. The effects of surfactant concentration on synthesis of mesoporous titania were studied. The structural characterisation was studied by differential thermal analysis, infrared spectroscopy, X-ray diffraction. Studies by X-ray diffraction showed that crystallisation of TiO2 powder occurs at 200°C, above 200°C we obtained a mixture of two forms-Anatase and rutile. The textural characterisation by nitrogen adsorption-desorption allowed us to observe the variation of the surface area, porous volume and pore diameters according to temperature and [CTAB]/[Ti-alkoxide] molar ratio. The analysis of the results shows that addition of surfactant residue increases considerably its pore diameters. The deposit thin layers has been realized with a sol prepared with the destabilization of colloidal solutions process. Scanning electron-spectroscopy observation for thermally treated (at 400 and 600°C samples, showed homogeneous layers without cracking.

  7. Micellization Behavior of Long-Chain Substituted Alkylguanidinium Surfactants. (United States)

    Bouchal, Roza; Hamel, Abdellah; Hesemann, Peter; In, Martin; Prelot, Bénédicte; Zajac, Jerzy


    Surface activity and micelle formation of alkylguanidinium chlorides containing 10, 12, 14 and 16 carbon atoms in the hydrophobic tail were studied by combining conductivity and surface tension measurements with isothermal titration calorimetry. The purity of the resulting surfactants, their temperatures of Cr→LC and LC→I transitions, as well as their propensity of forming birefringent phases, were assessed based on the results of ¹H and (13)C NMR, differential scanning calorimetry (DSC), and polarizing microscopy studies. Whenever possible, the resulting values of Krafft temperature (TK), critical micelle concentration (CMC), minimum surface tension above the CMC, chloride counter-ion binding to the micelle, and the standard enthalpy of micelle formation per mole of surfactant (ΔmicH°) were compared to those characterizing alkyltrimethylammonium chlorides or bromides with the same tail lengths. The value of TK ranged between 292 and 314 K and increased strongly with the increase in the chain length of the hydrophobic tail. Micellization was described as both entropy and enthalpy-driven. Based on the direct calorimetry measurements, the general trends in the CMC with the temperature, hydrophobic tail length, and NaCl addition were found to be similar to those of other types of cationic surfactants. The particularly exothermic character of micellization was ascribed to the hydrogen-binding capacity of the guanidinium head-group.

  8. Surfactant mediated slurry formulations for Ge CMP applications

    KAUST Repository

    Basim, G. Bahar


    In this study, slurry formulations in the presence of self-assembled surfactant structures were investigated for Ge/SiO2 CMP applications in the absence and presence of oxidizers. Both anionic (sodium dodecyl sulfate-SDS) and cationic (cetyl trimethyl ammonium bromide-C12TAB) micelles were used in the slurry formulations as a function of pH and oxidizer concentration. CMP performances of Ge and SiO2 wafers were evaluated in terms of material removal rates, selectivity and surface quality. The material removal rate responses were also assessed through AFM wear rate tests to obtain a faster response for preliminary analyses. The surfactant adsorption characteristics were studied through surface wettability responses of the Ge and SiO2 wafers through contact angle measurements. It was observed that the self-assembled surfactant structures can help obtain selectivity on the silica/germanium system at low concentrations of the oxidizer in the slurry. © 2013 Materials Research Society.


    Directory of Open Access Journals (Sweden)

    Elena Irina Moater


    Full Text Available The interactions between surfactants and proteins shows some similarities with interactions between surfactants and polymers, but the hydrophobic amphoteric nature of proteins and their secondary and tertiary structure components make them different from conventional polymer systems. Many studies from the past about surfactant - proteins bonding used the dialysis techniques. Other techniques used to determine the binding isotherm, included ultrafiltration, ultracentrifugation, potentiometry, ion-selective electrode method and surface tension. High affinity isotherms which are typical of an anionic surfactant - protein bonding, exhibit an initial increase steep followed by a slow growth region and then a vertical growth above a certain concentration. This isotherm is typical of ionic surfactant to protein binding. Often the high affinity initial bond appears at very low concentrations of surfactant and therefore in some protein-surfactant systems, the exact shape of the isotherm in this region may be missing. The surfactant - protein binding is influenced by a number of variables such as the nature and chain length of surfactant, pH, ionic strength, temperature, nature of this protein and additives.

  10. Nitroethylation of vinyl triflates and bromides. (United States)

    Padilla-Salinas, Rosaura; Walvoord, Ryan R; Tcyrulnikov, Sergei; Kozlowski, Marisa C


    A two-carbon homologation of vinyl triflates and bromides for the synthesis of homoallylic nitro products is described. This palladium-catalyzed double coupling of nitromethane exploits the anion stabilizing and leaving group properties of nitromethane, generating the homo allyl nitro products via a tandem cross-coupling/π-allylation sequence. The resultant process provides a mild and convenient entry to nitroethylated products, which are versatile precursors to β,γ-unsaturated carbonyls, homoallylic amines, and nitrile oxides.

  11. Propantheline bromide is effective against dog drooling

    DEFF Research Database (Denmark)

    Gyldenløve, Mette; Thyssen, Jacob P


    Hyperhidrosis is a common condition characterized by extensive sweat secretion. Systemic treatment with anticholinergics might prove effective, but patients often suffer from side effects, e.g. dryness of the mouth. We present a clinical case of severe polydipsia in a six-month-old puppy who had ...... accidentally consumed 50 tablets of propantheline bromide 15 mg. Afterwards the puppy suffered from severe polydipsia, which cleared without treatment after three days....

  12. Soap opera : polymer-surfactant interactions on thin film surfaces /

    Energy Technology Data Exchange (ETDEWEB)

    Ozer, B. H. (Byram H.); Johal, M. S. (Malkiat S.); Wang, H. L. (Hsing-Lin); Robinson, J. M. (Jeanne M.)


    Surfactants are macromolecules with unique properties. They commonly contain a polar head group with a nonpolar hydrocarbon chain. These properties allow surfactants to solubilize greases and other nonpolar molecules. One particular way that this is accomplished is through the formation of micelles. Micelles are formed at the critical micelle concentration (cmc), which varies depending upon the nature of the surfactant and also the media in which the surfactant resides. These micelles can take a variety of shapes, but are generally characterized by surrounding the grease with the nonpolar hydrocarbon chains, exposing only the polarized head groups to the media, usually water. This property of easy solubilization has made surfactants a very attractive industrial agent, They are used most conventionally as industrial cleaning agents and detergents. However, they also have lesser-known applications in conjunction with polymers and other macromolecular mixtures, often creating a system with novel properties, such as increased solubilization and smoother mixture consistency. A recently developed field has investigated the self-assembly of polymers and polyelectrolytes onto thin film surfaces. There are many reasons for studying this process, such as for second harmonic generation purposes and bioassays. In this study, the interaction between the anionic polyelectrolyte poly[1-[4-(3-carboxy-4-hydroxyphenylazo)benzenesulfonamido]-1,2-ethanediyl, sodium salt] (PAZO) and two surfactants of opposite charge, Sodium Dodecyl Sulfate (SDS) and Dodecyl Trimethyl Ammonium Bromide (DTAB), in their assembly onto thin film surfaces was investigated. The kinetics of adsorbance onto the thin films was examined, followed by construction of 10-bilayer films using an alternating layer of the cationic polyelectrolyte poly(ethylenimine) (PEI) to provide the electrostatic means for the PAZO/surfactant combination to assemble onto the thin film. The kinetics of adsorption is being

  13. NMR diffusometry and conductometry study of the host-guest association between beta-cyclodextrin and dodecane 1,12-bis(trimethylammonium bromide). (United States)

    Cabaleiro-Lago, Celia; Nilsson, Markus; Valente, Artur J M; Bonini, Massimo; Söderman, Olle


    Surfactants form association complexes with cyclodextrins. In the present investigation we have used NMR-diffusometry and electrical conductivity to follow the interactions which take place between beta-cyclodextrin and a bolaform surfactant: dodecane 1,12-bis(trimethylammonium bromide). Both (1)H NMR self-diffusion and conductometry data indicate the formation of a 1:1 inclusion complex. Assuming this stoichiometry, it was possible to calculate the association constant; from the analysis of the self-diffusion coefficients of free beta-cyclodextrin and the bolaform surfactant an association constant K=3x10(3)M(-1) was obtained while the analysis of conductivity data gave a comparable value of K=2.5x10(3)M(-1).

  14. Hydrothermal synthesis and photoluminescent properties of stacked indium sulfide superstructures. (United States)

    Xing, Yan; Zhang, Hongjie; Song, Shuyan; Feng, Jing; Lei, Yongqian; Zhao, Lijun; Li, Meiye


    Unusual hierarchical stacked superstructures of cubic beta-In2S3 were fabricated via a facile hydrothermal process in the presence of a surfactant cetyltrimethylammonium bromide CTAB; the 3D superstructures were developed by helical propagation of surface steps from microflakes of 10-20 nm thickness.

  15. A kinetic study of 1,3-dipolar cycloadditions in micellar media

    NARCIS (Netherlands)

    Rispens, T; Engberts, JBFN


    The kinetics of the 1,3-dipolar cycloadditions (DC) of benzonitrile oxide with a series of N-substituted maleimides in micellar media have been investigated. Surfactants studied include anionic sodium dodecyl sulfate, cationic cetyltrimethylammonium bromide, and a series of nonionic alkyl poly(ethyl

  16. [Preliminary investigation on the formation mechanism of CCL4-water-cetyl trimethyl ammonium bromide (CTAB) gel]. (United States)

    Sun, Yan; Chen, Jing; He, An-qi; Huang, Kun; Yu, Lei; Liu, Cui-ge; Wei, Yong-ju; Zhai, Yan-jun; Xu, Yi-zhuang; Wu, Jin-guang


    Gels are gaining extensive interest owing to their versatile applications in fields such as drug delivery, tissue engineering, cosmetics, templated materials and food industry. Surfactants have an ability to self-assemble into a variety of supramolecular aggregate structures and morphologies. Of particular interest in resent years are surfactant-based gels, one special class of materials due to surfactant assemblies resulting in viscoelastic solid-like rheological behaviors. Up to now, there is only limited understanding on the mechanism of gel formation, especially on the interaction among water, organic solvents and surfactant during thegel formation. In this study we prepare a Low-molecule-gel that is composed of cetyl trimethyl ammonium bromide (CTAB), water and carbon tetrachloride. Based on the experimental result of XRD and titration, the authors find that CTAB in gel are more than in saturated CTAB solution but CTAB is not solide in gel. CTAB is not solvented in CCl4. The solubility of CTAB in saturated CTAB solution is limited. So the authors suppose that CTAB is a synergistically solubilized by water and CCl4 in the gel. In addition, both NMR and FTIR spectroscopic results demonstrate that CTAB cations form a quasi-ordered structure in the gel.

  17. Structure-property relationship of quinuclidinium surfactants--Towards multifunctional biologically active molecules. (United States)

    Skočibušić, Mirjana; Odžak, Renata; Štefanić, Zoran; Križić, Ivana; Krišto, Lucija; Jović, Ozren; Hrenar, Tomica; Primožič, Ines; Jurašin, Darija


    Motivated by diverse biological and pharmacological activity of quinuclidine and oxime compounds we have synthesized and characterized novel class of surfactants, 3-hydroxyimino quinuclidinium bromides with different alkyl chains lengths (CnQNOH; n=12, 14 and 16). The incorporation of non conventional hydroxyimino quinuclidinium headgroup and variation in alkyl chain length affects hydrophilic-hydrophobic balance of surfactant molecule and thereby physicochemical properties important for its application. Therefore, newly synthesized surfactants were characterized by the combination of different experimental techniques: X-ray analysis, potentiometry, electrical conductivity, surface tension and dynamic light scattering measurements, as well as antimicrobial susceptibility tests. Comprehensive investigation of CnQNOH surfactants enabled insight into structure-property relationship i.e., way in which the arrangement of surfactant molecules in the crystal phase correlates with their solution behavior and biologically activity. The synthesized CnQNOH surfactants exhibited high adsorption efficiency and relatively low critical micelle concentrations. In addition, all investigated compounds showed very potent and promising activity against Gram-positive and clinically relevant Gram-negative bacterial strains compared to conventional antimicrobial agents: tetracycline and gentamicin. The overall results indicate that bicyclic headgroup with oxime moiety, which affects both hydrophilicity and hydrophobicity of CnQNOH molecule in addition to enabling hydrogen bonding, has dominant effect on crystal packing and physicochemical properties. The unique structural features of cationic surfactants with hydroxyimino quinuclidine headgroup along with diverse biological activity have made them promising structures in novel drug discovery. Obtained fundamental understanding how combination of different functionalities in a single surfactant molecule affects its physicochemical

  18. Interaction between dimethyldioctadecylammonium bromide-modified PLGA microspheres and hyaluronic acid (United States)

    Mulia, Kamarza; Devi, Krisanti, Elsa


    In application of intravitreal injection, an extended drug delivery system is desired so that the frequency of injection to treat diabetic retinopathy may be reduced. Poly(lactic-co-glycolic acid) polymer (PLGA) was used to encapsulate a model drug in the form of microspheres. The zeta potential of dimethyldioctadecylammonium bromide (DDAB)-modified PLGA microspheres in water was proportional to the DDAB concentration used in the preparation step, up to +57.8 mV. The scanning electron microscope pictures and the zeta potential data (SEM) confirmed that the surface of the PLGA has been modified by the cationic surfactant and that electrostatic interaction between the positively charged microspheres and the negatively charged vitreous were present.


    Institute of Scientific and Technical Information of China (English)

    Cong-hua Lu; Chuan-qiou Luo; Wei-xiao Cao


    The interaction of poly(sodium sulfodecyl methacrylate) (PSSM) with cetyltrimethyl ammonium bromide (CTAB)was studied. It was found that the precipitate formed from PSSM and CTAB will be dissolved by excessive CTAB, resultingin the appearance of two maxima of the solution viscosity at the molar ratio (CTAB/-SO3-) of ≈ 0.68 and ≈ 1.30,respectively. The first one is related closely to the aggregation of polymer chains via CTAB molecules and the second oneshould be ascribed to the formation of the mixed micelles comprising surfactant and the polymer's hydrophobic chains. Theeffect of NaCl on the viscosity, the transmittance of the aqueous solution and the solubility of oil-soluble dye (dimethylyellow) in the mixed system were also investigated.


    Surfactants used to enhance remediation of soils by soil washing are often lost in the process. Neither the amount nor the cause of this loss is known. It is assumed that clays present in the soil are responsible for the loss of the surfactant. In this papere, adsorption prope...

  1. Surfactant monitoring by foam generation (United States)

    Mullen, Ken I.


    A device for monitoring the presence or absence of active surfactant or other surface active agents in a solution or flowing stream based on the formation of foam or bubbles is presented. The device detects the formation of foam with a light beam or conductivity measurement. The height or density of the foam can be correlated to the concentration of the active surfactant present.

  2. Surfactant adsorption kinetics in microfluidics (United States)

    Riechers, Birte; Maes, Florine; Akoury, Elias; Semin, Benoît; Gruner, Philipp; Baret, Jean-Christophe


    Emulsions are metastable dispersions. Their lifetimes are directly related to the dynamics of surfactants. We design a microfluidic method to measure the kinetics of adsorption of surfactants to the droplet interface, a key process involved in foaming, emulsification, and droplet coarsening. The method is based on the pH decay in the droplet as a direct measurement of the adsorption of a carboxylic acid surfactant to the interface. From the kinetic measurement of the bulk equilibration of the pH, we fully determine the adsorption process of the surfactant. The small droplet size and the convection during the droplet flow ensure that the transport of surfactant through the bulk is not limiting the kinetics of adsorption. To validate our measurements, we show that the adsorption process determines the timescale required to stabilize droplets against coalescence, and we show that the interface should be covered at more than 90% to prevent coalescence. We therefore quantitatively link the process of adsorption/desorption, the stabilization of emulsions, and the kinetics of solute partitioning—here through ion exchange—unraveling the timescales governing these processes. Our method can be further generalized to other surfactants, including nonionic surfactants, by making use of fluorophore-surfactant interactions.

  3. Adsorption of Anionic, Cationic and Nonionic Surfactants on Carbonate Rock in Presence of ZrO 2 Nanoparticles (United States)

    Esmaeilzadeh, Pouriya; Bahramian, Alireza; Fakhroueian, Zahra

    The adsorption of surfactants at the solid-water interface is important for the control of wetting, lubrication, detergency and in mineral flotation.We have studied the adsorptions of different types of surfactants, cationic (Dodecyl trimethylammonium bromide, DTAB), anionic (sodium dodecyl sulfate, SDS) and non-anionic (lauryl alcohol-7 mole ethoxylate, LA7) on carbonate rock in presence of zirconium oxide spherical nanoparticles (17-19 nm). ZrO2 nanoparticles with tetrahedral structure have significant effect on adsorption of surfactants on the carbonate rock. We have used the measured conductivities to determine the rate of adsorption of surfactants at rock-water interfaces. The conductivity of DTAB in aqueous solutions containing calcite powder decreases more than the other surfactants in contact with ZrO2 nanoparticles. We have also investigated the adsorption of surfactants at the air-water interface. The presence of nanoparticles, as demonstrated by our experiments, enhances the surface activity and surface adsorption of the surfactants through electrostatic forces or formation of nanostructures. Dynamic light structuring data shows similar aggregation number of nanoparticles in presence of nanoparticles.

  4. Technical and economic feasibility of soil flushing with non-ionic surfactant to remediate gas well condensate

    Energy Technology Data Exchange (ETDEWEB)

    Felske, D.; Morton, P.R. [EBA Engineering Consultants Ltd., Calgary, AB (Canada)


    The results of a feasibility study to assess the technical and economic viability of remediating condensate-impacted soils surrounding a main gas pipeline in northern Alberta by in situ flushing with non-ionic surfactant were presented. A commercially available non-ionic surfactant was evaluated for its solubility increasing properties as an economic means of solubilizing soil-bonded condensate. An injection-recovery well configuration was situated within the condensate spill pathway and was selected for a series of inter-well tests using surfactant injection and its recovery from a nearby pumped recovery well. Sodium bromide was used as a conservative tracer to assist in the selection of surfactant and solubilized hydrocarbon samples from the recovery well for laboratory analysis. Surfactant, hydrocarbon and tracer breakthrough curves were plotted for the recovered groundwater. Results enabled the quantification of surfactant effects on recovered groundwater. Findings demonstrated that the non-ionic surfactant achieved a significant solubilization and soil remediation of condensate at a more economic rate than bioventing, biosparging or soil vapour extraction when considered over the projected time, and attained all regulatory soil and groundwater quality remediation objectives.

  5. Reductive cross-coupling of nonaromatic, heterocyclic bromides with aryl and heteroaryl bromides. (United States)

    Molander, Gary A; Traister, Kaitlin M; O'Neill, Brian T


    Reductive cross-coupling allows the direct C-C bond formation between two organic halides without the need for preformation of an organometallic reagent. A method has been developed for the reductive cross-coupling of nonaromatic, heterocyclic bromides with aryl or heteroaryl bromides. The developed conditions use an air-stable Ni(II) source in the presence of a diamine ligand and a metal reductant to allow late-stage incorporation of saturated heterocyclic rings onto aryl halides in a functional-group tolerant manner.

  6. The aqueous catanionic system sodium perfluorooctanoate-dodecyltrimethylammonium bromide at low concentration. (United States)

    López-Fontán, José Luis; Blanco, Elena; Ruso, Juan M; Prieto, Gerardo; Schulz, Pablo C; Sarmiento, Félix


    The interaction between sodium perfluorooctanoate (SPFO) and dodecyltrimethylammonium bromide (DTAB) was studied by several methods and it was found strongly synergistic. Above a mole fraction of SPFO in the surfactant mixture (alpha(SPFO))=0.38, the interaction is repulsive and increases with the content of SPFO in both, the overall mixture and micelles, whereas the interaction is attractive if DTAB is in excess. At alpha(SPFO)=0.38 the low miscibility between hydrocarbon and fluorocarbon is counterbalanced by the electrostatic attraction between the opposite charged head groups, and the micelle composition is ideal (i.e., the mole fraction of SPFO in micelles X(SPFO)=alpha(SPFO)=0.38). The solubility of fluorocarbon in hydrocarbon is lower than that of hydrocarbon in fluorocarbon. Micelles of DTAB act as a solvent for SPFO without important structural changes, whilst micelles of SPFO undergo important changes when dissolve DTAB. This asymmetry may be interpreted as caused by the difference in chain length that favors the inclusion of the shorter chain in micelles of the longer surfactant, but disfavors the opposite process. Above X(SPFO)=0.5 there is an excess adsorption of bromide ions on the mixed micelles surface, giving rise to a high zeta potential. Micelles of pure SPFO or pure DTAB show an important energy barrier which prevents micelle flocculation. The inclusion of SPFO in DTAB micelles produces a reduction of the energy barrier, which disappeared when alpha(SPFO)=0.5. This produces the flocculation of micelles giving rise to the formation of a non-birefringent coacervate, which is probably formed by unordered isometric clusters of micelles.

  7. Langmuir monolayers of a hydrogenated/fluorinated catanionic surfactant: from the macroscopic to the nanoscopic size scale. (United States)

    Blanco, Elena; Piñeiro, Angel; Miller, Reinhard; Ruso, Juan M; Prieto, Gerardo; Sarmiento, Félix


    Langmuir monolayers of the hydrogenated/fluorinated catanionic surfactant cetyltrimethylammonium perfluorooctanoate at the air/water interface are studied at room temperature. Excess Gibbs energies of mixing, DeltaG(E), as well as transition areas and pressures, were obtained from the surface pressure-area isotherm. The DeltaG(E) curve indicates that tail-tail interactions are more important than head-head interactions at low pressures and vice versa. Atomic force microscopy and molecular dynamics simulations allowed a fine characterization of the monolayer structure as a function of the area per molecule at mesoscopic and nanoscopic size scales, respectively. A combined analysis of the techniques allow us to conclude that electrostatic interactions between the ionic head groups are dominant in the monolayer while hydrophobic parts are of secondary importance. Overall, results obtained from the different techniques complement to each other, giving a comprehensive characterization of the monolayer.

  8. Innovation in surfactant therapy II: surfactant administration by aerosolization. (United States)

    Pillow, J Jane; Minocchieri, S


    Instilled bolus surfactant is the only approved surfactant treatment for neonatal respiratory distress syndrome. However, recent trends towards increased utilization of noninvasive respiratory support for preterm infants with surfactant deficiency have created a demand for a similarly noninvasive means of administering exogenous surfactant. Past approaches to surfactant nebulization met with varying success due to inefficient aerosol devices resulting in low intrapulmonary delivery doses of surfactant with variable clinical effectiveness. The recent development of vibrating membrane nebulizers, coupled with appropriate positioning of the interface device, indicates that efficient delivery of aerosolized surfactant is now a realistic goal in infants. Evidence of clinical effect despite low total administered dose in pilot studies, together with suggestions of enhanced homogeneity of pulmonary distribution indicate that this therapy may be applied in a cost-effective manner, with minimal patient handling and disruption. These studies need to be subjected to appropriately designed randomized controlled trials. Further work is also required to determine the optimum delivery route (mask, intranasal prong, nasopharyngeal or laryngeal), dosing amount and redosing interval.

  9. IBS and the role of otilonium bromide. (United States)

    Boeckxstaens, Guy; Corazziari, Enrico S; Mearin, Fermín; Tack, Jan


    Awareness of the seriousness of irritable bowel disorder (IBS) remains low among clinicians. In this review, we summarize the current knowledge of IBS and highlight the major personal, economic, and social burden of the disease, and the importance of adequate treatment of what is still often viewed as a trivial disorder. In fact, IBS is a major reason for referral. It is crucial that the varied pathophysiologies of this complex heterogeneous disease are understood in order to be able to treat both the presenting symptoms (pain, bloating, flatulence, abnormal defecation, diarrhea, constipation) and the underlying disorder effectively. Low-grade inflammatory and immune activation has been observed, but the precise triggers and mechanisms, and the relevance to symptom generation, remain to be established. IBS patients require different treatment strategies according to the pattern, severity, frequency, and symptoms. While initial therapy traditionally targets the most bothersome symptom, long-term therapy aims at maintaining symptom control and preventing recurrence. In addition to dietary/lifestyle interventions and psychosocial strategies, a wide range of pharmacologic therapies are approved for use in IBS depending on the symptoms reported. Musculotropic spasmolytics, which act directly on intestinal smooth muscle contractility, such as otilonium bromide, are effective, particularly in the relief of abdominal pain and bloating, and are well tolerated in IBS. THE OBIS TRIAL: The recent large placebo-controlled Otilonium Bromide in Irritable Bowel Syndrome study demonstrated the superiority of otilonium bromide versus placebo not only in the reduction of pain and bloating, but also in protection from relapse due to the long-lasting effect.

  10. Different thermal unfolding pathways of catalase in the presence of cationic surfactants. (United States)

    Blanco, Elena; Ruso, Juan M; Prieto, Gerardo; Sarmiento, Félix


    In this paper we have corroborated the usefulness of spectroscopic techniques, such as UV-visible, in the study and thermodynamic characterization of the thermal unfolding of catalase as a function of the concentration and alkyl chain length of n-alkyltrimethylammonium bromides (CnTAB, n = 8, 10, and 12). For this reason, a thermodynamic model was used which included experimental data corresponding to the pre- and posttransition into the observable transition. It has been found that n-alkyltrimethylammonium bromides play two opposite roles in the folding and stability of catalase. They act as a structure stabilizer at a low molar concentration and as a destabilizer at a higher concentration. The maximum of the unfolding temperature has been found to decrease with the alkyl chain. The reason for this difference has been suggested to be the side chains involved. In the presence of C8TAB and C10TAB, Gibbs energies of unfolding (DeltaG(T)) decrease with concentration, whereas for C12TAB an increase has been observed. These findings can be explained by the fact that when differences in the hydrophobic nature of the surfactants exist, different pathways of unfolding may occur. Also, the presence of surfactants has been observed to affect the cold denaturation of catalase. Thermodynamic results suggest that the thermal denaturation of catalase in the presence of n-alkyltrimethylammonium bromides is a perfect transition between two states.

  11. Europium-doped barium bromide iodide

    Energy Technology Data Exchange (ETDEWEB)

    Gundiah, Gautam; Hanrahan, Stephen M.; Hollander, Fredrick J.; Bourret-Courchesne, Edith D.


    Single crystals of Ba0.96Eu0.04BrI (barium europium bromide iodide) were grown by the Bridgman technique. The title compound adopts the ordered PbCl2 structure [Braekken (1932). Z. Kristallogr. 83, 222-282]. All atoms occupy the fourfold special positions (4c, site symmetry m) of the space group Pnma with a statistical distribution of Ba and Eu. They lie on the mirror planes, perpendicular to the b axis at y = +-0.25. Each cation is coordinated by nine anions in a tricapped trigonal prismatic arrangement.

  12. Principles for microscale separations based on redox-active surfactants and electrochemical methods. (United States)

    Rosslee, C A; Abbott, N L


    We report principles for microscale separations based on selective solubilization and deposition of sparingly water-soluble compounds by an aqueous solution of a redox-active surfactant. The surfactant, (11-ferrocenylundecyl)trimethylammonium bromide, undergoes a reversible change in micellization upon oxidation or reduction. This change in aggregation is exploited in a general scheme in which micelles of reduced surfactant are formed and then put in contact with a mixture of hydrophobic compounds leading to selective solubilization of the compounds. The micelles are then electrochemically disrupted, leading to the selective deposition of their contents. We measured the selectivity of the solubilization and deposition processes using mixtures of two model drug-like compounds, o-tolueneazo-beta-naphthol (I) and 1-phenylazo-2-naphthylamine (II). By repeatedly solubilizing and depositing a mixture that initially contained equal mole fractions of each compound, we demonstrate formation of a product that contains 98.4% of I after six cycles. Because the aggregation states of redox-active surfactants are easily controlled within simple microfabricated structures, including structures that define small stationary volumes (e.g., wells of a microtiter plate) or flowing volumes of liquids (e.g., microfabricated channels), we believe these principles may be useful for the purification or analysis of compounds in microscale chemical process systems. When used for purification, these principles provide separation of surfactant and product.

  13. Theoretical and Experimental Studies on Interactions of Cationic-Anionic Surfactants

    Institute of Scientific and Technical Information of China (English)

    王大喜; 杜永顺; 岳长涛; 侯建国; 栗秀刚; 杨文杰


    Typical cationic and anionic surfactants were chosen and their interactions were calculated by quantum chemical method. Interaction energies are -0.2378 kJ·mol-1, -3.3394 kJ·mol-1 and 0.1204 kJ·mol-1 for the molecular pairs with fluocarbon and hydrocarbon chain: C4H10/C5H12, C4F10/C5H12, and C4F10 /C5F12, respectively.When hydrophilic group with cationic and anionicions is introduced, interaction energies are -287.40kJ·mol-1,-311.18 kJ·mo1-1 and -345.83 kJ·mo1-1. The results show that there is strong static interaction between cationic and anionic surfactants. It has been predicted that mixed monolayer may be formed and surface activity is enhanced favorably, especially for mixtures of cationic and anionic surfactants with fluocarbon and hydrocarbon chains. The anionic surfactants, sodium octadecylbenzenesulfonate perfluopolyetherbenzenesulonate(ANF-I) was synthesized, mixture effects of ANF-I with sodium octadecylbenzenesulfonate or dodecyldimethyl benzylammonium bromide were studied. The results indicate that the efficiency of mixing increased and the theoretical prediction was testified. These results can provide useful information for the design of new surfactants.


    National Research Council Canada - National Science Library

    Soniya C. Alphonse; Acka Priya Varghese


    .... MATERIALS AND METHODS The study is a prospective randomized controlled study conducted at a tertiary care hospital to study the effect of Hyoscine Butyl Bromide Suppositories for postoperative...

  15. Removal of petroleum aromatic hydrocarbons by surfactant-modified natural zeolite: the effect of surfactant

    Energy Technology Data Exchange (ETDEWEB)

    Torabian, Ali; Seifi, Laleh; Bidhendi, Gholamreza Nabi; Azimi, Ali Akbar [Faculty of the Environment, University of Tehran (Iran); Kazemian, Hossein [SPAG Zeolite R and D Group, Technology Incubation Centre, Science and Technology Park of Tehran University, Tehran (Iran); Department of Chemical and Biochemical Engineering, University of Western Ontario, London, Ontario (Canada); Ghadiri, Seid Kamal [Department of Environmental Health Engineering, School of Public Health and Institute of Public Health Research, Tehran University of Medical Sciences, Tehran (Iran)


    Monoaromatic hydrocarbons including benzene, toluene, ethylbenzene and xylene isomers (BTEX) are a very important category of water pollutants. These volatile compounds are very hazardous because of their fast migration in soil and water bodies and their acute and chronic toxicities when inhaled or ingested, especially benzene which is a known carcinogenic molecule. In this study, a natural zeolite (i. e., clinoptilolite-rich tuffs) was modified by two cationic surfactants (i. e., hexadecyltrimethyl ammonium chloride (HDTMA-Cl), and N-cetylpyridinium bromide (CPB)). The prepared adsorbents were then characterized, and their adsorptive capabilities for BTEX examined at different experimental conditions. The results of adsorption tests at 24 h revealed that the adsorption capacity of the modified zeolites improved by increasing the surfactant loading (i. e., less than the critical micelle concentration (CMC), to higher than the CMC), which caused an increase in sorption capacity from 60 to 70% for HDTMA-modified samples, and from 47 to 99% for CPB-modified zeolite. Adsorption kinetic tests showed the optimum contact time was 48 h with an average BTEX removal of 90 and 93% for HDTMA-modified and CPB-modified zeolite, respectively. Results showed that by increasing of pH from 3 to 11, the sorption capacity of the adsorbent decreased markedly from 97 to 75%. Analyzing the influence of temperature showed that the adsorption efficiency of adsorbents for benzene reduced from 93% at 20 C to 10% at 4 C. However, the influence of temperature on other compounds was not remarkable. Overall, CPB-modified zeolite exhibited higher selectivity toward BTEX compounds at optimum experimental conditions. Although commercial powder activated carbon (PAC) showed a higher capacity for all BTEX compounds and faster adsorption kinetics, the adsorption capacity of the CPB-modified zeolite at optimized conditions was competitive with PAC results. (Abstract Copyright [2010], Wiley Periodicals

  16. Surfactant enhanced volumetric sweep efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Harwell, J.H.; Scamehorn, J.F.


    Surfactant-enhanced waterflooding is a novel EOR method aimed to improve the volumetric sweep efficiencies in reservoirs. The technique depends upon the ability to induce phase changes in surfactant solutions by mixing with surfactants of opposite charge or with salts of appropriate type. One surfactant or salt solution is injected into the reservoir. It is followed later by injection of another surfactant or salt solution. The sequence of injections is arranged so that the two solutions do not mix until they are into the permeable regions well away from the well bore. When they mix at this point, by design they form a precipitate or gel-like coacervate phase, plugging this permeable region, forcing flow through less permeable regions of the reservoir, improving sweep efficiency. The selectivity of the plugging process is demonstrated by achieving permeability reductions in the high permeable regions of Berea sandstone cores. Strategies were set to obtain a better control over the plug placement and the stability of plugs. A numerical simulator has been developed to investigate the potential increases in oil production of model systems. Furthermore, the hardness tolerance of anionic surfactant solutions is shown to be enhanced by addition of monovalent electrolyte or nonionic surfactants. 34 refs., 32 figs., 8 tabs.


    Directory of Open Access Journals (Sweden)

    T. P. Pirog


    Full Text Available It was shown literature and own experimental data concerning the use of microbial surface active glycolipids (rhamno-, sophoro- and trehalose lipids and lipopeptides for water and soil purification from oil and other hydrocarbons, removing toxic heavy metals (Cu2+, Cd2+, Ni2+, Pb2+, degradation of complex pollution (oil and other hydrocarbons with heavy metals, and the role of microbial surfactants in phytoremediation processes. The factors that limit the use of microbial surfactants in environmental technologies are discussed. Thus, at certain concentrations biosurfactant can exhibit antimicrobial properties and inhibit microorganisms destructing xenobiotics. Microbial biodegradability of surfactants may also reduce the effectiveness of bioremediation. Development of effective technologies using microbial surfactants should include the following steps: monitoring of contaminated sites to determine the nature of pollution and analysis of the autochthonous microbiota; determining the mode of surfactant introduction (exogenous addition of stimulation of surfactant synthesis by autochthonous microbiota; establishing an optimal concentration of surfactant to prevent exhibition of antimicrobial properties and rapid biodegradation; research both in laboratory and field conditions.

  18. Corrosion inhibition performance of a ionic liquid surfactant Br

    Directory of Open Access Journals (Sweden)

    Jing LIU


    Full Text Available In order to study the novel green organic mercury-substituting inhibitors, the ionic liquid surfactant 1-methyl-3-dodecyl imidazole bromide ( Br is synthesized with N-methyl imidazole and 1-bromodecane as raw materials. The corrosion inhibition of Br for zinc in zinc-manganese batteries is investigated using electrochemical methods and weight loss methods. The results show that corrosion inhibition efficiency increases with the increase of the concentration of Br, and when the concentration is higher than 8×10-3 mol/L, the inhibition efficiency tends to be stable. The polarization curve shows that Br belongs to mixed-type corrosion inhibitor. The thermodynamic parameters show that Br is spontaneously adsorbed on the zinc surface, forming a monomolecular adsorption layer, which fits with Langmuir adsorption isotherm with physical and chemical adsorption mechanism.

  19. Counterion condensation in ionic micelles as studied by a combined use of SANS and SAXS

    Indian Academy of Sciences (India)

    V K Aswal; P S Goyal; H Amenitsch; S Bernstorff


    We report a combined use of small-angle neutron scattering (SANS) and small-angle X-ray scattering (SAXS) to the study of counterion condensation in ionic micelles. Small-angle neutron and X-ray scattering measurements have been carried out on two surfactants cetyltrimethylammonium bromide (CTABr) and cetyltrimethylammonium chloride (CTACl), which are similar but having different counterions. SANS measurements show that CTABr surfactant forms much larger micelles than CTACl. This is explained in terms of higher condensation of Br0 counterions than Cl- counterions. SAXS data on these systems suggest that the Br- counterions are condensed around the micelles over smaller thickness than those of Cl- counterions.

  20. Sodium Hypochlorite and Sodium Bromide Individualized and Stabilized Carbon Nanotubes in Water

    KAUST Repository

    Xu, Xuezhu


    Aggregation is a major problem for hydrophobic carbon nanomaterials such as carbon nanotubes (CNTs) in water because it reduces the effective particle concentration, prevents particles from entering the medium, and leads to unstable electronic device performances when a colloidal solution is used. Molecular ligands such as surfactants can help the particles to disperse, but they tend to degrade the electrical properties of CNTs. Therefore, self-dispersed particles without the need for surfactant are highly desirable. We report here, for the first time to our knowledge, that CNT particles with negatively charged hydrophobic/water interfaces can easily self-disperse themselves in water via pretreating the nanotubes with a salt solution with a low concentration of sodium hypochlorite (NaClO) and sodium bromide (NaBr). The obtained aqueous CNT suspensions exhibit stable and superior colloidal performances. A series of pH titration experiments confirmed the presence and role of the electrical double layers on the surface of the salted carbon nanotubes and of functional groups and provided an in-depth understanding of the phenomenon.

  1. Self-assembly Of cetyl trimethylammonium bromide in ethanol-water mixtures

    Institute of Scientific and Technical Information of China (English)

    Li Wei; Zhang Ming; Zhang Jinli; Han Yongcai


    The critical micelle concentration (CMC) of cetyl trimethylammonium bromide (CTAB) in both water and ethanol-water-mixed solvent was determined using steady- state fluorescence techniques in order to investigate the effect of the self-assembling properties of the surfactant on the template synthesis of porous inorganic materials.Results indicated that the CMC increased with the increase of ethanol concentration in the mixed solvent.The CMC of CTAB is 0.0009 mol/L in water,while it is 0.24 mol/L in ethanol.Furthermore,the dissipative particle dynamics (DPD) was adopted to simulate the aggregation of CTAB in water and ethanol/water mixtures,and the energy difference was calculated for the surfactant tail groups after mixing with the solvent.The simulation results reflected a regularity similar to the experimental data,i.e.,tail groups of CTAB interacted more strongly with ethanol than with water,which elucidates the reason that the micelle is difficult to form in ethanol.

  2. Anaerobic Biodegradation of Detergent Surfactants

    Directory of Open Access Journals (Sweden)

    Erich Jelen


    Full Text Available Detergent surfactantscan be found in wastewater in relevant concentrations. Most of them are known as ready degradable under aerobic conditions, as required by European legislation. Far fewer surfactants have been tested so far for biodegradability under anaerobic conditions. The natural environment is predominantly aerobic, but there are some environmental compartments such as river sediments, sub-surface soil layer and anaerobic sludge digesters of wastewater treatment plants which have strictly anaerobic conditions. This review gives an overview on anaerobic biodegradation processes, the methods for testing anaerobic biodegradability, and the anaerobic biodegradability of different detergent surfactant types (anionic, nonionic, cationic, amphoteric surfactants.

  3. Thermodynamics of cationic surfactant sorption onto natural clinoptilolite

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, E.J.; Bowman, R.S. [New Mexico Inst. of Mining and Technology, Socorro, NM (United States); Carey, J.W. [Los Alamos National Lab., NM (United States)


    Sorption enthalpies of hexadecyltrimethylammonium bromide (HDTMA) as monomers and micelles and tetraethylammonium bromide (TEA) were used with surfactant, counterion, and co-ion sorption isotherms to infer the conformation, sorption mechanism, and relative stability of the sorbed surfactants on natural clinoptilolite. The average value of the sorption enthalpy was {minus}10.38 kJ/mol for monomers, {minus}11.98 kJ/mol for micelles, and +3.03 kJ/mol for TEA. Sorption of monomers produced a lower sorption plateau than equivalent micelle sorption (maxima 145 mmol/kg, 225 mmol/kg). Analysis of the sorption data demonstrated a change in the sorption mechanism at the external cation exchange capacity (ECEC) of clinoptilolite. Sorption data from below and above the ECEC were fit to a simple polynomial model and the Gibbs free energy of sorption ({Delta} G{sub m}{sup 0}) and sorption entropies were calculated. Resultant values of {Delta} G{sub m}{sup 0} were {minus}9.27 and {minus}14.38 kJ/mol for HDTMA monomers and micelles, respectively, for sorption below the ECEC, and {minus}16.11 and {minus}23.10 kJ/mol, respectively, for sorption above the ECEC. The value for TEA was {minus}1.04 kJ/mol, indicating weaker sorption than for HDTMA. Monomer sorption to clinoptilolite exceeded the ECEC, even when the solution concentration was below the critical micelle concentration. Hydrophobic (tail-tail) components of {Delta} G{sub m}{sup 0} were the driving force for sorption of HDTMA, both below and above the ECEC. A significant kinetic effect was observed in the sorption isotherms with a period of rapid sorption followed by slow equilibration requiring 7 days to achieve steady state for HDTMA; TEA equilibration occurred within 24 h.

  4. Surfactants as microbicides and contraceptive agents: a systematic in vitro study.

    Directory of Open Access Journals (Sweden)

    Otilia V Vieira

    Full Text Available BACKGROUND: The urgent need for cheap and easy-to-use protection against both unwanted pregnancies and sexually transmitted diseases has stimulated considerable interest in the use of surfactants as microbicides, anti-viral, and contraceptive agents in recent years. In the present study we report a systematic in vitro evaluation of the microbicidal, anti-viral and contraceptive potential of cationic, anionic, zwitterionic, and non-ionic surfactants. METHODOLOGY/PRINCIPAL FINDINGS: Toxicity was evaluated in mammalian columnar epithelial (MDCK cells, human sperm cells, Candida albicans, Escherichia coli, Pseudomonas aeruginosa, Neisseria gonorrhoeae, Streptococcus agalactiae and Enterococcus faecalis. The inhibition of adenovirus and lentivirus infection of MDCK cells was also tested. A homologous series of cationic surfactants, alkyl-N,N,N-trimethylammonium bromides (C(nTAB, with varying alkyl chains were shown to be bactericidal and fungicidal at doses that were related to the surfactant critical micelle concentrations (CMC, all of them at concentrations significantly below the CMC. In general, bacteria were more susceptible to this surfactant group than C. albicans and this organism, in turn, was more susceptible than MDCK cells. This suggests that the C(nTAB may be useful as vaginal disinfectants only in so far as bacterial and fungal infections are concerned. None of the surfactants examined, including those that have been used in pre-clinical studies, showed inhibition of adenovirus or lentivirus infection of MDCK cells or spermicidal activity at doses that were sub-toxic to MDCK cells. CONCLUSIONS/SIGNIFICANCE: The results of this study lead us to propose that systematic analysis of surfactant toxicity, such as we report in the present work, be made a mandatory pre-condition for the use of these substances in pre-clinical animal and/or human studies.

  5. Effect of double quaternary ammonium groups on micelle formation of partially fluorinated surfactant. (United States)

    Matsuoka, Keisuke; Chiba, Nagisa; Yoshimura, Tomokazu; Takeuchi, Emi


    To investigate the effect of divalency on the micelle properties, we synthesized divalent cationic surfactants composed of fluorocarbons and double quaternary ammonium groups N,N-dimethyl-N-[2-(N'-trimethylammonium)ethyl]-1-(3-perfluoroalkyl-2-hydroxypropyl) ammonium bromide [C(n)(F)C(3)-2Am; where n (=8 or 10) represents the number of carbon atoms in the fluorocarbon chain]. The double quaternary ammonium groups are continuously combined by the ethylene spacer in the surfactant head group, which clearly distinguishes the molecular design of the surfactant from those of the other typical divalent surfactants, bolaform and gemini types. The presence of the divalent head group results in an advantageous increase in their solubility [i.e., rise in the critical micelle concentration (cmc)]; however, the extra electrostatic repulsion between divalent cations decreases the surface activity in comparison with monovalent homologous fluorinated surfactants. The cmc, surface tension at cmc, and area occupied by a surfactant molecule in aqueous solution at 298.2K are 4.32 mM, 30.6 mN m(-1), and 0.648 nm(2 )molecule(-1), respectively, for C(8)(F)C(3)-2Am, and 1.51 mM, 30.4 mN m(-1), and 0.817 nm(2) molecule(-1), respectively, for C(10)(F)C(3)-2Am. The micellar size and shape were investigated by dynamic light scattering and freeze-fracture transmission electron microscopy (TEM). The TEM micrographs show that C(n)(F)C(3)-2Am (n=8 and 10) mainly forms ellipsoidal micelles approximately 10-100 nm in size for n=8 and approximately 10-20 nm in size for n=10. The degree of counterion binding to micelle was determined by selective electrode potential measurements, and the results of 0.7-0.8 agree with the average values for conventional monovalent ionic surfactants.

  6. Treatment with exogenous surfactant stimulates endogenous surfactant synthesis in premature infants with respiratory distress syndrome

    NARCIS (Netherlands)

    Bunt, JEH; Carnielli, VP; Janssen, DJ; Wattimena, JLD; Hop, WC; Sauer, PJ; Zimmermann, LJI


    Objective: Treatment of preterm infants with respiratory distress syndrome (RDS) with exogenous surfactant has greatly improved clinical outcome. Some infants require multiple doses, and it has not been studied whether these large amounts of exogenous surfactant disturb endogenous surfactant metabol

  7. Electrochemical Oscillations Induced by Surfactants

    Institute of Scientific and Technical Information of China (English)

    翟俊红; 贺占博


    A new type of electrochemical oscillation induced by surfactant was observed in experiments. The electrochemical system is a Daniell cell with a copper rod in CuSO4 aqueous and an aluminum rod in Al(NO3)3 aqueous as electrodes. The surfactants are CTAB, TX-100, SLS. The addition of trace surfactant solution by a micro-syringe made the original monotonously changing electrochemical system produce obvious periodic phenomena. At the mean time, the copper ion selective electrode and Hg2SO4 reference electrode were used to monitor the copper electrode reaction and determine its rate constant k of first order reaction. According to the experimental results of electrode reaction kinetics, the possible mechanism was found to be the polarization induced from the directional adsorption of trace surfactant on the electrode surface. That is the electrochemical oscillations.

  8. Synthesis and surfactant modification of clinoptilolite and montmorillonite for the removal of nitrate and preparation of slow release nitrogen fertilizer. (United States)

    Bhardwaj, Deepesh; Sharma, Monika; Sharma, Pankaj; Tomar, Radha


    This article introduces the synthesis of clinoptilolite and montmorillonite, and their surfactant modification by using solutions of hexadecyltrimethylammonium bromide (CH(3)(CH(2))(15)N(Br)(CH(3))(3), HDTMAB) and dioctadecyldimethylammonium bromide ((CH(3)(CH(2))(17))(2)N(Br)(CH(3))(2), DODMAB). The feasibility of using surfactant modified silicates (SMSs) as a potential adsorbent for nitrate and for slow release of nutrient has been investigated. Adsorption isotherms of NO(3)(-) on SMSs have been measured at aqueous concentration of 160-280 mg L(-1). The SMSs show much higher adsorption capacity than the unmodified materials as determined by Langmuir adsorption isotherm. The surfactant modification and increased surfactant loading concentration enhance the nitrate anion retaining capacity of silicates (montmorillonite (16.05 mg g(-1))clinoptilolite (30.58 mg g(-1))clinoptilolite (75.19 mg g(-1))clinoptilolite (125.00 mg g(-1))). The adsorption data fitted well with the Langmuir and Freundlich isotherms. The slow nutrient release studies have been performed by thin layers-funnel analytical test and soil column percolating system. The obtained results indicate that SMSs are very good adsorbent for NO(3)(-) and a slow release of nitrogen is achievable as it releases NO(3)(-) still after 15-20 days of leaching study.

  9. Persurf, a New Method to Improve Surfactant Delivery: A Study in Surfactant Depleted Rats



    PURPOSE: Exogenous surfactant is not very effective in adults with ARDS, since surfactant does not reach atelectatic alveoli. Perfluorocarbons (PFC) can recruit atelectatic areas but do not replace impaired endogenous surfactant. A surfactant-PFC-mixture could combine benefits of both therapies. The aim of the proof-of-principal-study was to produce a PFC-in-surfactant emulsion (Persurf) and to test in surfactant depleted Wistar rats whether Persurf achieves I.) a more homogenous pulmonary di...

  10. Conduction bands and invariant energy gaps in alkali bromides

    NARCIS (Netherlands)

    Boer, P.K. de; Groot, R.A. de


    Electronic structure calculations of the alkali bromides LiBr, NaBr, KBr, RbBr and CsBr are reported. It is shown that the conduction band has primarily bromine character. The size of the band gaps of bromides and alkali halides in general is reinterpreted.

  11. Surfactants decrease the toxicity of ZnO, TiO2 and Ni nanoparticles to Daphnia magna. (United States)

    Oleszczuk, Patryk; Jośko, Izabela; Skwarek, Ewa


    The objective of the study was the estimation of the effect of surfactants on the toxicity of ZnO, TiO2 and Ni nanoparticles (ENPs) towards Daphnia magna. The effect of hexadecyltrimethylammonium bromide (CTAB), triton X-100 (TX100) and 4-dodecylbenzenesulfonic acid (SDBS) was tested. The Daphtoxkit F test (conforming to OECD Guideline 202 and ISO 6341) was applied for the toxicity testing. Both the surfactants and the ENPs were toxic to D. magna. The addition of ENPs to a solution of the surfactants caused a significant reduction of toxicity of ENPs. The range of reduction of the toxicity of the ENPs depended on the kind of the ENPs and their concentration in the solution, and also on the kind of surfactant. For nano-ZnO the greatest reduction of toxicity was caused by CTAB, while for nano-TiO2 the largest drop of toxicity was observed after the addition of TX100. In the case of nano-Ni, the effect of the surfactants depended on its concentration. Most probably the reduction of toxicity of ENPs in the presence of the surfactants was related with the formation of ENPs aggregates that inhibited the availability of ENPs for D. magna.

  12. Kinetic spectrophotometric determination of bromide in clidinium-c drug

    Institute of Scientific and Technical Information of China (English)

    Ali Sheibani; M. Reza Shishehbore; Zahra Tavakolian Ardakani


    A simple, rapid and sensitive method has been described for the determination of the trace amounts of bromide. The method is based on the catalytic effect of bromide ion on the oxidation of methylene blue by bromate in sulfuric acid media. The reaction is monitored spectrophotometrically by measuring the decrease in the absorbance of methylene blue at 665 nm. Bromide was determined in the range of 0.05-1.90 μg/mL with the detection limit of 0.03 μg/mL. The relative standard deviations of five replicate determinations of 0.20 and 10.0 μg/mL of bromide were 2.4% and 1.8%, respectively. The influence of potential interfering ions and substances was studied. The method is applied to the analysis of bromide in clidinium-c tablet as a real sample.

  13. Synthesis and characterization of zeolite material from coal ashes modified by surfactant; Sintese e caracterizacao de material zeolitico de cinzas de carvao modificado por surfactante

    Energy Technology Data Exchange (ETDEWEB)

    Fungaro, D.A., E-mail: dfungaro@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (CQMA/IPEN/CNEN-SP), Sao Paulo, SP (Brazil). Centro de Quimica e Meio Ambiente; Borrely, S.I. [Instituto de Pesquisas Energeticas e Nucleares (CTR/IPEN/CNEN-SP), Sao Paulo, SP (Brazil). Centro de Tecnologia das Radiacoes


    Coal ash was used as starting material for zeolite synthesis by means of hydrothermal treatment. The surfactant-modified zeolite (SMZ) was prepared by adsorbing the cationic surfactant hexadecyltrimethylammonium bromide (HDTMA-Br) on the external surface of the zeolite from coal ash. The zeolite structure stability was monitored during the characterization of the materials by FTIR, XDR and SEM. The structural parameters of surfactant-modified zeolite are very close to that of corresponding non-modified zeolite which indicates that the crystalline nature of the zeolite remained intact after required chemical treatment with HDTMA-Br molecules and heating treatment for drying. The most intense peaks in the FTIR spectrum of HDTMA-Br were observed in SMZ spectrum confirming adsorption of surfactant on zeolites. (author)

  14. Irritable bowel syndrome: focus on otilonium bromide. (United States)

    Boeckxstaens, Guy; Clavé, Pere; Corazziari, Enrico S; Tack, Jan


    Irritable bowel syndrome is a prevalent and chronic disorder, characterized by recurrent abdominal pain/discomfort, bloating and altered bowel habits. This condition affects an estimated 10-15% of the population worldwide and impacts heavily on a patient's daily life and ability to work, as well as healthcare resource utilization. Drug therapy aimed at correcting the primary symptoms of diarrhea/constipation/bloating may have little effect on abdominal pain, which results from visceral hypersensitivity. Smooth muscle relaxants or antispasmodics decrease the tone and contractility of intestinal smooth muscle, effectively managing abdominal pain. Otilonium bromide has been widely used worldwide and has been found to be safe and well tolerated, and superior to placebo for the reduction of symptoms and the prevention of symptom relapse in patients with irritable bowel syndrome.

  15. Receptor binding profile of Otilonium bromide. (United States)

    Evangelista, S; Giachetti, A; Chapelain, B; Neliat, G; Maggi, C A


    The interaction of Otilonium bromide (OB) with binding sites for 63 different receptors and ion channels in appropriate preparations has been investigated. Experiments were also performed in rat colon, the preferred tissue for OB 'in vivo' uptake after oral administration. Among the receptors investigated OB binds with sub microM affinity to muscarinic M1, M2, M4, M5 and PAF receptors and with microM affinity to the diltiazem binding site on L type Ca2+ channels. In the rat colon OB shows competitive interaction with the verapamil binding site on L type Ca2+ channels and with muscarinic M2 receptors with IC50 of 1020 and 1220 nM, respectively. These findings provide a molecular rationale to explain the spasmolytic action exerted by OB on intestinal smooth muscle. In particular, a combination of antimuscarinic and Ca2+ channel blocker properties seems to best account for the action of this compound.

  16. Effect of Surfactant/Silica and Hydrothermal Time on the Specific Surface Area of Mesoporous Materials from Coal-Measure Kaolin

    Institute of Scientific and Technical Information of China (English)

    WU Qisheng; LI Shuiping


    Mesoporous materials with the highest surface area were synthesized by hydrothermal treatment from coal-measure kaolin using cetyltrimethylammonium bromide (CTAB) as template. The effect of several factors on surface area of products also had been discussed. The products were characterized by FTIR, HRTEM and N2 adsorption and desorption isotherm plot methods. There was typical structure as Si-O, Si-OH and Si-O-Si of mesoporous materials in the framework of synthesized materials; the pore size distributions of the products showed a sharp peak at 3.82 nm. The effect of hydrothermal treatment time and the amount of template on the specific surface area of mesoporous materials was important, when the Surf/Si = 0.135, and hydrothermal time = 12 h, and the surface area of the product reached up to 1 070 m2/g, which was higher than other products.

  17. Ultrafine PEG-coated poly(lactic-co-glycolic acid) nanoparticles formulated by hydrophobic surfactant-assisted one-pot synthesis for biomedical applications (United States)

    Chu, Chih-Hang; Wang, Yu-Chao; Huang, Hsin-Ying; Wu, Li-Chen; Yang, Chung-Shi


    A novel method was developed for the one-pot synthesis of ultrafine poly(lactic-co-glycolic acid) nanoparticles (PLGA NPs), using an emulsion solvent evaporation formulation method. Using either cetyltrimethylammonium bromide (CTAB) or poly(ethylene glycol)-distearyl phosphoethanolamine (PEGPE) as an oily emulsifier during the emulsion process, produced PLGA particle sizes of less than 50 nm, constituting a breakthrough in emulsion formulation methods. The yield of ultrafine PLGA NPs increased with PEGPE/PLGA ratio, reaching a plateau at around 85%, when the PEGPE/PLGA ratio reached 3:1. The PEGPE-PLGA NPs exhibited high drug loading content, reduced burst release, good serum stability, and enhanced cell uptake rate compared with traditional PLGA NPs. Sub-50 nm diameter PEG-coated ultrafine PLGA NPs show great potential for in vivo drug delivery systems.

  18. Ultrafine PEG-coated poly(lactic-co-glycolic acid) nanoparticles formulated by hydrophobic surfactant-assisted one-pot synthesis for biomedical applications

    Energy Technology Data Exchange (ETDEWEB)

    Chu, Chih-Hang; Wu, Li-Chen; Yang, Chung-Shi [Department of Applied Chemistry and Graduate Institute of Biomedicine and Biomedical Technology, National Chi-Nan University, Puli, Taiwan (China); Wang, Yu-Chao; Huang, Hsin-Ying, E-mail: [Center for Nanomedicine Research, National Health Research Institutes, 35 Keyand Road Zhunan, Mialoli 350, Taiwan (China)


    A novel method was developed for the one-pot synthesis of ultrafine poly(lactic-co-glycolic acid) nanoparticles (PLGA NPs), using an emulsion solvent evaporation formulation method. Using either cetyltrimethylammonium bromide (CTAB) or poly(ethylene glycol)-distearyl phosphoethanolamine (PEGPE) as an oily emulsifier during the emulsion process, produced PLGA particle sizes of less than 50 nm, constituting a breakthrough in emulsion formulation methods. The yield of ultrafine PLGA NPs increased with PEGPE/PLGA ratio, reaching a plateau at around 85%, when the PEGPE/PLGA ratio reached 3:1. The PEGPE-PLGA NPs exhibited high drug loading content, reduced burst release, good serum stability, and enhanced cell uptake rate compared with traditional PLGA NPs. Sub-50 nm diameter PEG-coated ultrafine PLGA NPs show great potential for in vivo drug delivery systems.

  19. Competitive interactions between components in surfactant-cosurfactant-additive systems. (United States)

    Chaghi, Radhouane; de Ménorval, Louis-Charles; Charnay, Clarence; Zajac, Jerzy


    Complex interactions of phenol (PhOH), heptanol (HeOH) and heptanoic acid (HeOIC) with micellar aggregates of hexadecyltrimethylammonium bromide (HTAB) in aqueous solutions at surfactant concentrations close to the CMC, HeOH or HeOIC content of 0.5 mmol kg(-1), and phenol molality of 1, 5, or 10 mmol kg(-1) have been investigated at 303 K by means of (1)H NMR spectroscopy, titration calorimetry and solution conductimetry. The analysis of the composition-dependence of the (1)H chemical shifts assigned to selected protons in the surfactant and additive units revealed the location of PhOH both within the hydrophobic micelle core and in the vicinity of the quaternary ammonium groups, the phenol penetration being somewhat deeper in the presence of HeOIC. The phenomenon was globally more exothermic with increasing extent of PhOH solubilization and it was accompanied by a gradual decrease in the positive entropy of micellization. The solubilization was competitive for high phenol contents in the aqueous phase, with some HeOH and HeOIC units being displaced progressively towards the aqueous phase.

  20. Porous gold nanobelts templated by metal-surfactant complex nanobelts. (United States)

    Li, Lianshan; Wang, Zhijian; Huang, Teng; Xie, Jinglin; Qi, Limin


    Unique, porous gold nanobelts consisting of self-organized nanoparticles were synthesized in a high yield by morphology-preserved transformation from metal-surfactant complex precursor nanobelts formed by a bolaform surfactant dodecane-1,12-bis(trimethylammonium bromide) (N-C(12)-NBr(2)) and HAuCl(4). It was revealed that the precursor nanobelts of the stoichiometric N-C(12)-N(AuCl(4))(2) complex formed through electrostatic combination of the positively charged quaternary ammonium headgroups of N-C(n)-NBr(2) and the negatively charged AuCl(4)(-) ions. They were subsequently converted into porous gold nanobelts with shrunken sizes upon reduction by NaBH(4). The morphology of the produced gold nanostructures could be adjusted by changing the mixing ratio between N-C(12)-NBr(2) and HAuCl(4) in the reaction solution. It was found that the obtained porous Au nanobelts exhibited enhanced catalytic activity toward reduction of 4-nitrophenol compared with solid gold nanobelts, probably owing to their larger surface area and more active sites.

  1. Photoactivation and perturbation of photoluminescent properties of aqueous ZnS nanoparticles: Probing the surfactant-semiconductor interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Mehta, S.K., E-mail: [Department of Chemistry and Centre for Advanced Studies in Chemistry, Panjab University, Chandigarh 160014 (India); Kumar, Sanjay [Department of Chemistry, Government College, Chowari, Chamba, H.P. 176302 (India)


    Graphical abstract: The variation in PL emission intensity of growing ZnS NPs during first hour of their growth depends upon the nature of surfactants used for their stabilization. Highlights: Black-Right-Pointing-Pointer Photoluminescence (PL) intensity of growing ZnS NPs increases linearly with time. Black-Right-Pointing-Pointer Significant PL enhancement in anionic surfactant stabilized ZnS NPs on irradiation. Black-Right-Pointing-Pointer PL decay with delay time after removing from UV-irradiation in all the surfactants. Black-Right-Pointing-Pointer Better PL stability of ZnS NPs stabilized in anionic surfactants than cationic ones. - Abstract: The in situ photochemistry of aqueous colloidal ZnS has been studied in relation to variety of the surfactants as surface passivating agents. The photoluminescence (PL) intensity of ZnS nanoparticles (NPs) has been drastically enhanced as compared to their bare counterparts due to surface passivation by surfactants depending upon their molecular structure. Cationic surfactants of alkyltrimethylammonium bromide series with different chain lengths (C{sub 16}, C{sub 14} and C{sub 12}) have been tested. The PL emission of ZnS NPs decreases with decrease in chain length because of ineffective stabilization and passivation of surface because the larger sized NPs were produced in the surfactant with smaller chain length. On the other hand, three anionic surfactants with C{sub 12} chain length with different head groups have been capable of comparatively effective passivation to produce stable NPs with better luminescence. The changing nature of surface states during growth and long time ripening of ZnS NPs has also been monitored by comparing time evolution PL emission in different surfactants. The influence of UV-light irradiation in enhancing the PL emission has been found to be surfactant structure dependent with maximum enhancement observed with the surfactants having {pi}-electrons in their head group functionalities. The

  2. Oxidation of gem-chloronitroso- and vic-chloronitroso-alkanes and -cycloalkanes to respective chloronitro compounds by novel cetyltrimethylammonium hypochlorite reagent

    Indian Academy of Sciences (India)

    Abdulkarim H A Mohammed; Gopalpur Nagendrappa


    Cetyltrimethylammonium hypochlorite (CTAHC) is prepared and used as an oxidizing agent for nitroso group to nitro group. The gem-chloronitroso and vic-chloronitroso compounds are prepared respectively from ketoximes and olefins by reacting with NOCl generated in situ from chlorotrimethylsilane (TMSCl) and iso-amyl nitrite. CTAHC oxidizes gem-chloronitroso and vic-chloronitroso compounds to the corresponding chloronitro derivatives. While gem-chloronitro compounds are obtained in good yields, the vic-chloronitro derivatives are formed in moderate yields, because of the propensity of the vic-chloronitroso group to tautomerize to -chlorooxime. The present method is simple and practical, particularly for the preparation of vic-chloronitro compounds, considering the fact that the known methods of their preparation are few and quite involved.

  3. Biomimicry of surfactant protein C. (United States)

    Brown, Nathan J; Johansson, Jan; Barron, Annelise E


    Since the widespread use of exogenous lung surfactant to treat neonatal respiratory distress syndrome, premature infant survival and respiratory morbidity have dramatically improved. Despite the effectiveness of the animal-derived surfactant preparations, there still remain some concerns and difficulties associated with their use. This has prompted investigation into the creation of synthetic surfactant preparations. However, to date, no clinically used synthetic formulation is as effective as the natural material. This is largely because the previous synthetic formulations lacked analogues of the hydrophobic proteins of the lung surfactant system, SP-B and SP-C, which are critical functional constituents. As a result, recent investigation has turned toward the development of a new generation of synthetic, biomimetic surfactants that contain synthetic phospholipids along with a mimic of the hydrophobic protein portion of lung surfactant. In this Account, we detail our efforts in creating accurate mimics of SP-C for use in a synthetic surfactant replacement therapy. Despite SP-C's seemingly simple structure, the predominantly helical protein is extraordinarily challenging to work with given its extreme hydrophobicity and structural instability, which greatly complicates the creation of an effective SP-C analogue. Drawing inspiration from Nature, two promising biomimetic approaches have led to the creation of rationally designed biopolymers that recapitulate many of SP-C's molecular features. The first approach utilizes detailed SP-C structure-activity relationships and amino acid folding propensities to create a peptide-based analogue, SP-C33. In SP-C33, the problematic and metastable polyvaline helix is replaced with a structurally stable polyleucine helix and includes a well-placed positive charge to prevent aggregation. SP-C33 is structurally stable and eliminates the association propensity of the native protein. The second approach follows the same design

  4. High Temperature Seedless Synthesis of Au NRs Using BDAC/CTAB Co-surfactant

    Institute of Scientific and Technical Information of China (English)

    Min Li; Lai Wei; Xian Zhang; Xue-feng Yu


    Au nanorods have been successfully synthesized at 90 ℃ by using hexadecyltrimethylammonium bromide (CTAB) and benzyldimethylammoniumchloride hydrate (BDAC) co-surfactant. At 90 ~C, the reaction time was less than 10 s, and the longitudinal surface plasmon absorption band could vary between 680 and 770 nm by adjusting the molar ratio of BDAC to CTAB from 2 to 0.5. At 90 ~C, nanorods with a longitudinal surface plasmon absorption peak of 770 nm can be obtained when the molar ratio of BDAC to CTAB was 3:2.

  5. Competitive solubilization of phenol by cationic surfactant micelles in the range of low additive and surfactant concentrations. (United States)

    Chaghi, Radhouane; de Ménorval, Louis-Charles; Charnay, Clarence; Derrien, Gaëlle; Zajac, Jerzy


    Competitive interactions of phenol (PhOH) with micellar aggregates of hexadecyltrimethylammonium bromide (HTAB) against 1-butanol (BuOH) in aqueous solutions at surfactant concentrations close to the critical micelle concentration (CMC), BuOH concentration of 0.5 mmol kg(-1), and phenol contents of 1, 5, or 10 mmol kg(-1) have been investigated at 303 K by means of (1)H NMR spectroscopy, titration calorimetry, and solution conductimetry. The solubilization loci for phenol were deduced from the composition-dependence of the (1)H chemical shifts assigned to various protons in the surfactant and additive units. Since in pure HTAB solutions phenol is already in competition with Br(-), addition of 1 mmol kg(-1) NaBr to the system weakens the phenol competitiveness. The presence of butanol in the HTAB micelles causes phenol to penetrate deeper toward the hydrophobic micelle core. For higher phenol contents, the butanol molecules are constrained to remain in the bulk solution and are progressively replaced within the HTAB micelles by the aromatic units. The competitive character of phenol solubilization against butanol is well supported by changes in the thermodynamic parameters of HTAB micellization in the presence of both of the additives.

  6. Surfactant for pediatric acute lung injury. (United States)

    Willson, Douglas F; Chess, Patricia R; Notter, Robert H


    This article reviews exogenous surfactant therapy and its use in mitigating acute lung injury (ALI) and the acute respiratory distress syndrome (ARDS) in infants, children, and adults. Biophysical and animal research documenting surfactant dysfunction in ALI/ARDS is described, and the scientific rationale for treatment with exogenous surfactant is discussed. Major emphasis is placed on reviewing clinical studies of surfactant therapy in pediatric and adult patients who have ALI/ARDS. Particular advantages from surfactant therapy in direct pulmonary forms of these syndromes are described. Also discussed are additional factors affecting the efficacy of exogenous surfactants in ALI/ARDS.

  7. A Molecular Thermodynamic Model for Interfacial Tension in Surfactant-Oil-Water System

    Institute of Scientific and Technical Information of China (English)


    An interfacial equation of state based on perturbation theory for surfactant-oil-water system has been developed. By combining the interfacial equation of state with Boudh-Hir and Mansoori's model, a molecular ther- modynamic model has been proposed. The interfacial tension of surfactant-oil-water systems can be calculated from the surface tensions of pure oil and water by this model. The inteffacial tension data for sodium dodecyl sulphate- heptane-water system, polyoxyethylene n-octylphenol-heptane-water system and hexadecyl trimethyl ammonium bromide-heptane-water system have been correlated. By using the adjustable parameters obtained, the interfacial tensions of these systems at other temperatures have been predicted. Both the correlated and the predicted values are satisfactory.

  8. Mesoporous Silica Materials Synthesized via Sol-Gel Methods Modified with Ionic Liquid and Surfactant Molecules

    Institute of Scientific and Technical Information of China (English)

    Cun-ying Xu; Ru-lan Tang; Yi-xin Hu; Peng-xiang Zhang


    Mesoporous silica materials were synthesized via a sol-gel method employing a room temperature ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate, [bmim][BF4]) as a new solvent medium and further modified with surfactant (hexadecyl-trimethyl-ammonium bromide, CTAB) as a pore templating material. The synthesized samples were characterized by the transmission electron microscopy, X-ray diffraction, and N2 adsorption-desorption techniques. The results indicated that the mesoporous silica synthesized by using [bmim][BF4] and CTAB as mixed templates showed better mesostructural order and smaller pore size, compared with mesoporous silica materials synthesized by using single [bmim][BF4]as template under the same conditions. This indicates that the presence of surfactant can affect the microstructures of silica prepared by the present synthesis method.

  9. Fluorescent Ensemble Based on Bispyrene Fluorophore and Surfactant Assemblies: Sensing and Discriminating Proteins in Aqueous Solution. (United States)

    Fan, Junmei; Ding, Liping; Bo, Yu; Fang, Yu


    A particular bispyrene fluorophore (1) with two pyrene moieties covalently linked via a hydrophilic spacer was synthesized. Fluorescence measurements reveal that the fluorescence emission of 1 could be well modulated by a cationic surfactant, dodecyltrimethylammonium bromide (DTAB). Protein sensing studies illustrate that the selected ensemble based on 1/DTAB assemblies exhibits ratiometric responses to nonmetalloproteins and turn-off responses to metalloproteins, which can be used to differentiate the two types of proteins. Moreover, negatively charged nonmetalloproteins can be discriminated from the positively charged ones according to the difference in ratiometric responses. Fluorescence sensing studies with control bispyrenes indicate that the polarity of the spacer connecting two pyrene moieties plays an important role in locating bispyrene fluorophore in DTAB assemblies, which further influences its sensing behaviors to noncovalent interacting proteins. This study sheds light on the influence of the probe structure on the sensing performance of a fluorescent ensemble based on probe and surfactant assemblies.

  10. Surface active complexes formed between keratin polypeptides and ionic surfactants. (United States)

    Pan, Fang; Lu, Zhiming; Tucker, Ian; Hosking, Sarah; Petkov, Jordan; Lu, Jian R


    Keratins are a group of important proteins in skin and hair and as biomaterials they can provide desirable properties such as strength, biocompatibility, and moisture regaining and retaining. The aim of this work is to develop water-soluble keratin polypeptides from sheep wool and then explore how their surface adsorption behaves with and without surfactants. Successful preparation of keratin samples was demonstrated by identification of the key components from gel electrophoresis and the reproducible production of gram scale samples with and without SDS (sodium dodecylsulphate) during wool fibre dissolution. SDS micelles could reduce the formation of disulphide bonds between keratins during extraction, reducing inter-molecular crosslinking and improving keratin polypeptide solubility. However, Zeta potential measurements of the two polypeptide batches demonstrated almost identical pH dependent surface charge distributions with isoelectric points around pH 3.5, showing complete removal of SDS during purification by dialysis. In spite of different solubility from the two batches of keratin samples prepared, very similar adsorption and aggregation behavior was revealed from surface tension measurements and dynamic light scattering. Mixing of keratin polypeptides with SDS and C12TAB (dodecyltrimethylammonium bromide) led to the formation of keratin-surfactant complexes that were substantially more effective at reducing surface tension than the polypeptides alone, showing great promise in the delivery of keratin polypeptides via the surface active complexes. Neutron reflection measurements revealed the coexistence of surfactant and keratin polypeptides at the interface, thus providing the structural support to the observed surface tension changes associated with the formation of the surface active complexes.

  11. Behaviour of a binary solvent mixture constituted by an amphiphilic ionic liquid, 1-decyl-3-methylimidazolium bromide and water Potentiometric and conductimetric studies. (United States)

    Sirieix-Plénet, Juliette; Gaillon, Laurent; Letellier, Pierre


    We investigated the properties of 1-decyl-3-methylimidazolium bromide (DMImBr), a molten salt at room temperature, and its mixtures with water in the whole proportions. At low concentrations, this salt behaved like a classical cationic amphiphile. Its critical micellar concentration (cmc) was determined by conductimetry and by measuring electromotive forces (EMF) with bromide or cationic surfactant-selective electrodes. Moreover, the association rate of the counter ion to micelle has been determined on a wide range of concentrations, allowing characterising the micellisation equilibrium by a solubility product. The conductivity of this liquid electrolyte in mixtures with water was maximal at high concentrations. We modelled this behaviour, taking into account the molar volume fraction of both phases. Our results show that these solutions, which are composed of dispersed aggregates, behave like mixtures of two phases that interpenetrate themselves.

  12. Selective oxidation of bromide in wastewater brines from hydraulic fracturing. (United States)

    Sun, Mei; Lowry, Gregory V; Gregory, Kelvin B


    Brines generated from oil and natural gas production, including flowback water and produced water from hydraulic fracturing of shale gas, may contain elevated concentrations of bromide (~1 g/L). Bromide is a broad concern due to the potential for forming brominated disinfection byproducts (DBPs) during drinking water treatment. Conventional treatment processes for bromide removal is costly and not specific. Selective bromide removal is technically challenging due to the presence of other ions in the brine, especially chloride as high as 30-200 g/L. This study evaluates the ability of solid graphite electrodes to selectively oxidize bromide to bromine in flowback water and produced water from a shale gas operation in Southwestern PA. The bromine can then be outgassed from the solution and recovered, as a process well understood in the bromine industry. This study revealed that bromide may be selectively and rapidly removed from oil and gas brines (~10 h(-1) m(-2) for produced water and ~60 h(-1) m(-2) for flowback water). The electrolysis occurs with a current efficiency between 60 and 90%, and the estimated energy cost is ~6 kJ/g Br. These data are similar to those for the chlor-alkali process that is commonly used for chlorine gas and sodium hydroxide production. The results demonstrate that bromide may be selectively removed from oil and gas brines to create an opportunity for environmental protection and resource recovery.

  13. Self-assembly of cationic surfactants that contain thioether groups in the hydrophobic tails. (United States)

    Lundberg, Dan; Shi, Lei; Menger, Fredric M


    Self-assembly in aqueous solutions of cationic surfactants that carry thioether groups in their hydrophobic tails has been investigated. Of particular interest was the identification of possible changes in the aggregate structure due to the presence of sulfur atoms. Solutions of four different compounds [CH(3)CH(2)S(CH(2))(10)N(CH(3))(3)(+)Br(-) (2-10), CH(3)(CH(2))(5)S(CH(2))(6)N(CH(3))(3)(+)Br(-) (6-6), CH(3)(CH(2))(7)S(CH(2))(6)N(CH(3))(3)(+)Br(-) (8-6), and CH(3)(CH(2))(7)S(CH(2))(8)N(CH(3))(3)(+)Br(-) (8-8)] were characterized by (1)H NMR, (13)C NMR, NMR diffusometry, and conductivity measurements. In addition to investigating aqueous solutions containing each of the thioethers present as the sole solute, mixtures of 2-10 or 6-6 with dodecyltrimethylammonium bromide (DTAB) were studied. The addition of a sulfide group to the hydrophobic tail causes an increase in the critical micelle concentration but has a limited effect on the aggregate structure. Micelles are formed at a well-defined concentration for all of the investigated surfactants and surfactant mixtures. However, a comparison of the behavior of concentrated solutions of 8-8 to that of solutions of hexadecyltrimethylammonium bromide (CTAB) of similar concentrations suggests that the presence of a sulfur atom decreases the tendency for micellar growth. This may be a consequence of a slightly higher preference for the micellar surface of a sulfur atom as compared to that of a methylene group in a similar position, an idea that is also supported by results for the surfactant mixtures.

  14. Variation in performance of surfactant loading and resulting nitrate removal among four selected natural zeolites. (United States)

    Guan, Huade; Bestland, Erick; Zhu, Chuanyu; Zhu, Honglin; Albertsdottir, Dora; Hutson, John; Simmons, Craig T; Ginic-Markovic, Milena; Tao, Xian; Ellis, Amanda V


    Surfactant modified zeolites (SMZs) have the capacity to target various types of water contaminants at relatively low cost and thus are being increasingly considered for use in improving water quality. It is important to know the surfactant loading performance of a zeolite before it is put into application. In this work we compare the loading capacity of a surfactant, hexadecyltrimethylammonium bromide (HDTMA-Br), onto four natural zeolites obtained from specific locations in the USA, Croatia, China, and Australia. The surfactant loading is examined using thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy, and Raman spectroscopy. We then compare the resulting SMZs performance in removing nitrate from water. Results show that TGA is useful to determine the HDTMA loading capacity on natural zeolites. It is also useful to distinguish between a HDTMA bi-layer and a HDTMA mono-layer on the SMZ surface, which has not been previously reported in the literature. TGA results infer that HDTMA (bi-layer) loading decreases in the order of US zeolite>Croatian zeolite>Chinese zeolite>Australian zeolite. This order of loading explains variation in performance of nitrate removal between the four SMZs. The SMZs remove 8-18 times more nitrate than the raw zeolites. SMZs prepared from the selected US and Croatian zeolites were more efficient in nitrate removal than the two zeolites commercially obtained from Australia and China.

  15. Surfactant-assisted sol–gel synthesis of forsterite nanoparticles as a novel drug delivery system

    Energy Technology Data Exchange (ETDEWEB)

    Hassanzadeh-Tabrizi, S.A., E-mail: [Young Researchers and Elite Club, Najafabad Branch, Islamic Azad University, Najafabad, Isfahan (Iran, Islamic Republic of); Bigham, Ashkan [Advanced Materials Research Center, Materials Engineering Department, Najafabad Branch, Islamic Azad University, Najafabad, Isfahan (Iran, Islamic Republic of); Rafienia, Mohammad [Biosensor Research Center, Isfahan University of Medical Sciences, Isfahan (Iran, Islamic Republic of)


    In the present study, forsterite nanoparticles were synthesized via surfactant-assisted sol–gel method using cetyltrimethyl ammonium bromide (CTAB) as a surfactant. The effects of CTAB contents and heat treatment on the textural properties and drug release from nanoparticles were investigated. The synthesized powders were studied by X-ray diffraction, Fourier transform infrared spectra, Brunauer–Emmett–Teller surface area analysis and transmission electron microscope images. Mg{sub 2}SiO{sub 4} materials demonstrated mesoporous characteristics and large specific surface area ranging from 159 to 30 m{sup 2}/g. The TEM results showed that forsterite nanorods had diameters about 4 nm and lengths ranging from 10 to 60 nm. It was found that the samples with 6 g CTAB show slower drug release rate than the other specimens, which is due to smaller pore size. This study revealed that the drug delivery of forsterite can be tailored by changing the amount of surfactant. - Highlights: • Forsterite nanoparticles were synthesized via surfactant-assisted sol–gel method. • Nanoparticles were loaded with ibuprofen as a novel drug delivery system. • Synthesized nanoparticles had a rod-like morphology. • CTAB concentration strongly affected the textural properties and drug release of the nanoparticles.

  16. Improving the quality of patchouli oil by adsorption process using surfactant modified of natural zeolite (United States)

    Kuntari, Purbaningtias, Tri Esti; Wiyantoko, Bayu; Kurniawati, Puji; Prasetyoko, Didik; Suprapto


    This research concerns with the development of natural material i.e. natural zeolite. Natural zeolite were modified by surfactant treatment. Material modification has been done using cetyltrimethyllammonium bromide as cationic surfactant for mesopore template. The physicochemical characters of natural material modified and unmodified was investigated by using XRD, FTIR, nitrogen physisorption, and SEM-EDX. The XRD was used to show crystallinity structure of natural material modified and unmodified. Surfactant treatment caused decreasing crystallinity of natural zeolite. The FTIR spectra showed characteristic peaks for natural zeolite modified and unmodified, the bands around 3400-3500 cm-1 and 1635-1641 cm-1 correspond to adsorbed water and bands around finger print area were characteristic for silica and alumina. Meanwhile physisorption nitrogen profiles gave information that the pore modification by surfactant. The morphologies of natural material modified and unmodified as well as chemical composition of the particles were shown by SEM-EDX. The usage of modified material decrease acidity number into 19.47% than unmodified material, which is 7,62%. The GC analysis showed that percentage of patchouli alcohol increases and new peaks were not identified indicated there was not any reaction appeared.

  17. A novel thermoalkaliphilic xylanase from Gordonia sp. is salt, solvent and surfactant tolerant. (United States)

    Kashyap, Radhika; Monika; Subudhi, Enketeswara


    Two aerobic bacterial consortia namely Con T and Con R were developed by enrichment technique from termite gut and cow dung respectively, using xylan as a sole carbon source. Molecular characterization of Con R based on 16S rRNA sequence analysis showed the presence of Pannonibacter sp. R-3 and Pseudoxanthomas sp. R-5. On the other hand, Con T showed the presence of Pseudoxanthomas sp. T-5, Cellulosimicrobium sp. T-21, and Gordonia sp. T-30. Being the maximum xylanase producer among the five isolates and being a novel xylanase producing bacterial genus, Gordonia sp. T-30 was selected. Xylanase produced by Gordonia sp. T-30 showed optimum activity at 60 °C and pH 9. Xylanase was 95% stable for 120 min at pH 9.0 and 98% stable at 60 °C for 90 min. Xylanase activity was stimulated in the presence of organic solvents such as petroleum ether, acetone, diethyl ether, n-hexane, and benzene. Detergent like cetyltrimethylammonium bromide and presence of NaCl also accelerated the xylanase function. Comparative evaluation was studied between sterilized and non-sterilized solid fermentation to produce xylanase by Gordonia sp. T-30 using various agricultural residues as growth substrate in cost effective manner. Industrially important features endowed by this xylanase make it a very promising candidate for food, feed, and fuel industry.

  18. Controlled synthesis of bionic microstructure PbS crystals by mixed cationic/anionic surfactants (United States)

    Li, Yanjie; Hu, Yongan; Zhang, Hui; Shen, Yuhua; Xie, Anjian


    Hexagonal starfish-like PbS crystals have been synthesized by the reaction of lead acetate and thioacetamide (TAA) controlled by mixture of cetyltrimethylammonium bromide/sodium dodecyl sulfate (STAB/SDS) at the molar ratio of 5: 1 through a hydrothermal process at 80°C. It has been found that the hexagonal starfish-like PbS single crystal is in cubic phase, and the six arms of the star extend along the six directions. By changing reaction conditions, such as the molar ratio of CTAB/SDS, temperature, and reaction time, the amounts of TAA and lead sources, the morphology and structure of the PbS crystals can be controlled. Furthermore, possible formation mechanism was preliminarily illustrated. The room-temperature photoluminescence spectra in solid state of the PbS single crystals obtained after different reaction times were investigated, which demonstrated that the PbS single crystals presented excellent optical properties. This work may open a novel route to the shaped-controllable synthesis of semiconductor crystals with various morphologies.

  19. Surfactant recovery from water using foam fractionation

    Energy Technology Data Exchange (ETDEWEB)

    Tharapiwattananon, N.; Osuwan, S. [Chulalongkorn Univ., Bangkok (Thailand); Scamehorn, J.F. [Inst. of Oklahoma, Norman, OK (United States)] [and others


    The purpose of this study was to investigate the use of foam fractionation to recover surfactant from water. A simple continuous mode foam fractionation was used and three surfactants were studied (two anionic and one cationic). The effects of air flow rate, foam height, liquid height, liquid feed surfactant concentration, and sparger porosity were studied. This technique was shown to be effective in either surfactant recovery or the reduction of surfactant concentration in water to acceptable levels. As an example of the effectiveness of this technique, the cetylpyridinium chloride concentration in water can be reduced by 90% in one stage with a liquid residence time of 375 minutes. The surfactant concentration in the collapsed foam is 21.5 times the feed concentration. This cationic surfactant was easier to remove from water by foam fractionation than the anionic surfactants studied.

  20. Synthesis of carbohydrate-based surfactants

    Energy Technology Data Exchange (ETDEWEB)

    Pemberton, Jeanne E.; Polt, Robin L.; Maier, Raina M.


    The present invention provides carbohydrate-based surfactants and methods for producing the same. Methods for producing carbohydrate-based surfactants include using a glycosylation promoter to link a carbohydrate or its derivative to a hydrophobic compound.

  1. Imidazolium-based ionic liquid-type surfactant as pseudostationary phase in micellar electrokinetic chromatography of highly hydrophilic urinary nucleosides. (United States)

    Rageh, Azza H; Pyell, Ute


    Ionic liquid (IL)-type surfactants have been shown to interact more strongly with polar compounds than traditionally used quaternary ammonium cationic surfactants. The aim of this study is to provide an alternative micellar electrokinetic chromatographic method (MEKC) for the analysis of urinary nucleosides in their ionic form at low surfactant concentration. This approach could overcome the use of high surfactant concentrations typically associated with the analysis of these highly hydrophilic metabolites as neutral species, which is frequently accompanied by high electric current, Joule heating and long analysis time. The investigated IL-type surfactant; 1-tetradecyl-3-methylimidazolium bromide (C14MImBr) is similar to the commonly employed cationic surfactant; tetradecyltrimethylammonium bromide (TTAB) but it provides a different separation selectivity. We employed C14MImBr micelles for the MEKC analysis of seven urinary nucleosides. The studied analytes possess a negative charge at pH 9.38 (exceptions are adenosine and cytidine which are neutral at this pH value). Borate imparts an additional negative charge to these compounds after complexation with the cis-diol functionality of the ribose unit, which in turn enables them to interact with the oppositely charged C14MImBr micelles via electrostatic (Coulomb) forces. The effect of the concentration of borate (the complexing, competing and buffering ion) on the effective electrophoretic mobilities and on the retention factors was investigated. The effective electrophoretic mobility data show that complexation between these nucleosides and borate occurs with high degree of complexation even at very low borate concentration (2.5 mmol L(-1) disodium tetraborate). In addition, we found that the retention factors are strongly dependent on the borate concentration being the highest when using the lowest borate concentration and they can be regulated by variation of either tetraborate concentration or the pH of the

  2. Effects of Concentration and Conformation of Surfactants on Phase Separation of Surfactant-Water-Oil Systems

    Institute of Scientific and Technical Information of China (English)

    袁银权; 邹宪武; 刘昊阳


    The effects of surfactants on the phase separation of surfactant-water-oil systems have been investigated by using discontinuous molecular dynamic simulations. The phase separation speed and equilibrium configuration are dependent on the surfactant concentration and conformation. The equilibrium concentration of surfactants at the interface remains constant. With the increasing surfactant concentration, the equilibrium configuration crosses over from the disperse phase to the bicontinuous one. The crossover concentration is estimated. The conformation of the surfactant has little effect on the equilibrium concentration of surfactants at the interface,while it affects the equilibrium configuration after phase separation.

  3. Complex Formation Between Polyelectrolytes and Ionic Surfactants



    The interaction between polyelectrolyte and ionic surfactant is of great importance in different areas of chemistry and biology. In this paper we present a theory of polyelectrolyte ionic-surfactant solutions. The new theory successfully explains the cooperative transition observed experimentally, in which the condensed counterions are replaced by ionic-surfactants. The transition is found to occur at surfactant densities much lower than those for a similar transition in non-ionic polymer-sur...

  4. Dyes adsorption blue vegetable and blue watercolor by natural zeolites modified with surfactants;Adsorcion de colorantes azul vegetal y azul acuarela por zeolitas naturales modificadas con surfactantes

    Energy Technology Data Exchange (ETDEWEB)

    Jardon S, C. C.; Olguin G, M. T. [ININ, Departamento de Quimica, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Diaz N, M. C., E-mail: teresa.olguin@inin.gob.m [Instituto Tecnologico de Toluca, Av. Instituto Tecnologico s/n, Ex-Rancho la Virgen, 52140 Metepec, Estado de Mexico (Mexico)


    In this work was carried out the dyes removal blue vegetable and blue watercolor of aqueous solutions, to 20 C, at different times and using a zeolite mineral of Parral (Chihuahua, Mexico) modified with hexadecyl trimethyl ammonium bromide or dodecyl trimethyl ammonium bromide. The zeolite was characterized before and after of its adaptation with NaCl and later with HDTMABr and DTMABr. For the materials characterization were used the scanning electron microscopy of high vacuum; elementary microanalysis by X-ray spectroscopy of dispersed energy and X-ray diffraction techniques. It was found that the surfactant type absorbed in the zeolite material influences on the adsorption process of the blue dye. Likewise, the chemical structure between the vegetable blue dye and the blue watercolor, determines the efficiency of the color removal of the water, by the zeolites modified with the surfactants. (Author)

  5. Organozinc Chemistry Enabled by Micellar Catalysis. Palladium-Catalyzed Cross-Couplings between Alkyl and Aryl Bromides in Water at Room Temperature. (United States)

    Duplais, Christophe; Krasovskiy, Arkady; Lipshutz, Bruce H


    Negishi-like cross-couplings between (functionalized) alkyl and aryl bromides are described. Despite the fact that organozinc reagents are intolerant of water, their formation as well as their use in an aqueous micellar environment is discussed herein. Each component of this complex series of events leading up to C-C bond formation has an important role which has been determined insofar as the type of zinc, amine ligand, surfactant, and palladium catalyst are concerned. In particular, the nature of the surfactant has been found to be crucial in order to obtain synthetically useful results involving highly reactive, moisture-sensitive organometallics. Neither organic solvent nor heat is required for these cross-couplings to occur; just add water.

  6. Chloride, bromide and iodide scintillators with europium (United States)

    Zhuravleva, Mariya; Yang, Kan


    A halide scintillator material is disclosed where the halide may comprise chloride, bromide or iodide. The material is single-crystalline and has a composition of the general formula ABX.sub.3 where A is an alkali, B is an alkali earth and X is a halide which general composition was investigated. In particular, crystals of the formula ACa.sub.1-yEu.sub.yI.sub.3 where A=K, Rb and Cs were formed as well as crystals of the formula CsA.sub.1-yEu.sub.yX.sub.3 (where A=Ca, Sr, Ba, or a combination thereof and X=Cl, Br or I or a combination thereof) with divalent Europium doping where 0.ltoreq.y.ltoreq.1, and more particularly Eu doping has been studied at one to ten mol %. The disclosed scintillator materials are suitable for making scintillation detectors used in applications such as medical imaging and homeland security.

  7. Selective oxidation of alcohols with alkali metal bromides as bromide catalysts: experimental study of the reaction mechanism. (United States)

    Moriyama, Katsuhiko; Takemura, Misato; Togo, Hideo


    A bromide-catalyzed oxidation of alcohols was developed which proceeded in the presence of an alkali metal bromide and an oxidant under mild conditions. The reaction involved an organic-molecule-free oxidation using KBr and Oxone and a Brønsted acid assisted oxidation using KBr and aqueous H2O2 solution to provide a broad range of carbonyl compounds in high yields. Moreover, the bromide-catalyzed oxidation of primary alcohols enabled the divergent synthesis of carboxylic acids and aldehydes under both reaction conditions in the presence of TEMPO. A possible catalytic mechanism was suggested on the basis of various mechanistic studies.

  8. Binding of cationic surfactants to humic substances

    NARCIS (Netherlands)

    Ishiguro, M.; Tan, W.; Koopal, L.K.


    Commercial surfactants are introduced into the environment either through waste products or site-specific contamination. The amphiphilic nature of both surfactants and humic substances (HS) leads to their mutual attraction especially when surfactant and HS are oppositely charged. Binding of the cati

  9. Surfactant analysis in oil-containing fluids

    Energy Technology Data Exchange (ETDEWEB)

    Gronsveld, J.; Faber, M.J. (Koninklijke Shell Exploratie en Produktie Laboratorium, Rijswijk (Netherlands))

    The total surfactant concentration in aqueous phase samples can be analysed with a potentiometric titration. In enhanced oil recovery research, however, the surfactant is produced not only in aqueous phase samples but also in oleic phase samples. The oleic constituents in the oliec phase samples interfere in the surfactant analysis and, therefore, the titration method has been adapted. (orig.).

  10. Surfactant adsorption to soil components and soils

    NARCIS (Netherlands)

    Ishiguro, Munehide; Koopal, Luuk K.


    Soils are complex and widely varying mixtures of organic matter and inorganic materials; adsorption of surfactants to soils is therefore related to the soil composition. We first discuss the properties of surfactants, including the critical micelle concentration (CMC) and surfactant adsorption on

  11. A spin label study of perturbation effects of N-(1-methyldodecyl)-N, N, N-trimethylammonium bromide and N-(1-methyldodecyl)-N, N-dimethylamine oxide on model membranes prepared from Escherichia coli-isolated lipids. (United States)

    Sersen, F; Leitmanová, A; Devínsky, F; Lacko, I; Balgavý, P


    Interaction of bactericidal surfactants N-(1-methyldodecyl)-N, N, N-trimethylammonium bromide (2-ATDBr) and N-(1-methyldodecyl)-N, N-dimethylamine oxide (2-ATDNO) with phospholipid membranes prepared from Escherichia coli -- isolated lipids was studied by ESR spectroscopy using m-doxyl stearic acid (m-DSA, m = 5, 12, 16) and N-cetyl-N, N-dimethyl-N-tempoylammonium bromide spin labels located in different membrane depths. 2-ATDBr was found to be a more potent membrane perturbant than 2-ATDNO both at equal membrane and sample concentrations; this is in compliance with the respective antimicrobial activities of these agents. Using the statistical model of hydrocarbon chains in lipid bilayers, the probabilities of the formation of gauche conformations and the effective energy differences between the trans and gauche conformations were calculated from m-DSA order parameters for two different bilayer regions. Based on these parameters, a molecular model of the location of surfactant molecules in bilayer has been formulated. It has been suggested that at low concentrations the surfactant molecules are located in structural defects between lipid clusters in the bilayer. After filling up these defects, the surfactant molecules penetrate into the clusters between lipid molecules, expand the bilayer laterally and increase the amount of gauche conformations in the hydrocarbon chains in the hydrophobic core of the bilayer.

  12. Miyaura Borylations of Aryl Bromides in Water at Room Temperature


    Lipshutz, Bruce H.; Moser, Ralph; Voigtritter, Karl R.


    New technology for palladium-catalyzed cross-couplings between B2pin2 and aryl bromides leading to arylboronates is described. Micellar catalysis serves to enable borylations to take place in water as the only medium at ambient temperatures.

  13. A new convenient access to highly functionalized ()-2-arylvinyl bromides

    Indian Academy of Sciences (India)

    Yubo Jiang; Chunxiang Kuang


    Highly functionalized ()-2-arylvinyl bromides were prepared in high yields through a new convenient access by acylation of ()-4-(2-bromovinyl)phenol with fatty and aromatic acids at room temperature using dicyclohexyl carbodiimide (DCC) and dimethylaminopyridine (DMAP).

  14. Methyl Bromide Commodity Fumigation Buffer Zone Lookup Tables (United States)

    Product labels for methyl bromide used in commodity and structural fumigation include requirements for buffer zones around treated areas. The information on this page will allow you to find the appropriate buffer zone for your planned application.

  15. Homocoupling of Aryl Bromides Catalyzed by Nickel Chloride in Pyridine

    Institute of Scientific and Technical Information of China (English)

    TAO, Xiao-Chun; ZHOU, Wei; ZHANG, Yue-Ping; DAI, Chun-ya; SHEN, Dong; HUANG, Mei


    Pyridine was used as a solvent for homocoupling of aryl bromides catalyzed by nickel chloride/triarylphosphine in the presence of zinc and recycled easily. Triphenylphosphine was the best ligand for nickel in this coupling reaction.

  16. Pd-catalyzed nucleophilic fluorination of aryl bromides. (United States)

    Lee, Hong Geun; Milner, Phillip J; Buchwald, Stephen L


    On the basis of mechanism-driven reaction design, a Pd-catalyzed nucleophilic fluorination of aryl bromides and iodides has been developed. The method exhibits a broad substrate scope, especially with respect to nitrogen-containing heteroaryl bromides, and proceeds with minimal formation of the corresponding reduction products. A facilitated ligand modification process was shown to be critical to the success of the reaction.

  17. Disinfection byproduct regulatory compliance surrogates and bromide-associated risk. (United States)

    Kolb, Chelsea; Francis, Royce A; VanBriesen, Jeanne M


    Natural and anthropogenic factors can alter bromide concentrations in drinking water sources. Increasing source water bromide concentrations increases the formation and alters the speciation of disinfection byproducts (DBPs) formed during drinking water treatment. Brominated DBPs are more toxic than their chlorinated analogs, and thus have a greater impact on human health. However, DBPs are regulated based on the mass sum of DBPs within a given class (e.g., trihalomethanes and haloacetic acids), not based on species-specific risk or extent of bromine incorporation. The regulated surrogate measures are intended to protect against not only the species they directly represent, but also against unregulated DBPs that are not routinely measured. Surrogates that do not incorporate effects of increasing bromide may not adequately capture human health risk associated with drinking water when source water bromide is elevated. The present study analyzes trihalomethanes (THMs), measured as TTHM, with varying source water bromide concentrations, and assesses its correlation with brominated THM, TTHM risk and species-specific THM concentrations and associated risk. Alternative potential surrogates are evaluated to assess their ability to capture THM risk under different source water bromide concentration conditions. The results of the present study indicate that TTHM does not adequately capture risk of the regulated species when source water bromide concentrations are elevated, and thus would also likely be an inadequate surrogate for many unregulated brominated species. Alternative surrogate measures, including THM3 and the bromodichloromethane concentration, are more robust surrogates for species-specific THM risk at varying source water bromide concentrations. Copyright © 2017. Published by Elsevier B.V.

  18. Persurf, a new method to improve surfactant delivery: a study in surfactant depleted rats.

    Directory of Open Access Journals (Sweden)

    Wolfram Burkhardt

    Full Text Available PURPOSE: Exogenous surfactant is not very effective in adults with ARDS, since surfactant does not reach atelectatic alveoli. Perfluorocarbons (PFC can recruit atelectatic areas but do not replace impaired endogenous surfactant. A surfactant-PFC-mixture could combine benefits of both therapies. The aim of the proof-of-principal-study was to produce a PFC-in-surfactant emulsion (Persurf and to test in surfactant depleted Wistar rats whether Persurf achieves I. a more homogenous pulmonary distribution and II. a more homogenous recruitment of alveoli when compared with surfactant or PFC alone. METHODS: Three different PFC were mixed with surfactant and phospholipid concentration in the emulsion was measured. After surfactant depletion, animals either received 30 ml/kg of PF5080, 100 mg/kg of stained (green dye Curosurf™ or 30 ml/kg of Persurf. Lungs were fixated after 1 hour of ventilation and alveolar aeration and surfactant distribution was estimated by a stereological approach. RESULTS: Persurf contained 3 mg/ml phospholipids and was stable for more than 48 hours. Persurf-administration improved oxygenation. Histological evaluation revealed a more homogenous surfactant distribution and alveolar inflation when compared with surfactant treated animals. CONCLUSIONS: In surfactant depleted rats administration of PFC-in-surfactant emulsion leads to a more homogenous distribution and aeration of the lung than surfactant alone.

  19. Pharmacology of the anticholinergic bronchospasmolytic agent flutropium bromide. (United States)

    Bauer, R; Fügner, A


    The anticholinergic agent (8r)-8-(2-fluoroethyl)-3 alpha-hydroxy-1 alpha H,tropanium bromide benzilic acid ester (flutropium bromide, Ba 598 BR) is a classic competitive antagonist of acetylcholine. In in vitro experiments it is more effective than atropine. In addition there are indications, that flutropium bromide may interfere with the anaphylactic reaction in a certain dose range in vitro. In in vivo experiments for the characterization of the anticholinergic properties flutropium bromide is also somewhat more effective than atropine after parenteral administration. Because of its quaternary structure no central anticholinergic effect is detectable. Furthermore, a poor enteral absorption is to be expected; this can be concluded from the low relative effectiveness after oral administration. After systemic administration, flutropium bromide is only slightly more effective than atropine. The duration of action is longer. After local administration as an aerosol it is superior to atropine with regard to both effectiveness and duration of action. Since in aerosol administration the ratio of the main effect to the most sensitive side effects, inhibition of salivary secretion, is 1:100, no side effects are to be expected even after high inhalational overdoses. Flutropium bromide can therefore be described as a preparation which is free of side effects. When used prophylactically it represents a therapeutic alternative to beta-mimetics and xanthine derivatives for most cases of obstructive airway diseases.

  20. Influence of ionic surfactants on the flocculation and sorption of palladium and mercury in the aquatic environment. (United States)

    Turner, Andrew; Xu, Jing


    The influence of sub-micellar concentrations of an anionic surfactant (sodium dodecyl sulphate; SDS) and a cationic surfactant (hexadecyl trimethylammonium bromide; HDTMA) on the aquatic behaviour of the strongly complexing metals, Pd(II) and Hg(II), has been investigated. In river water, flocculation of organic complexes of metal was suppressed by SDS but accentuated by HDTMA, effects that are consistent with electrostatic and hydrophobic interactions between ionic surfactants and natural polyelectrolytes. In sea water, flocculation of metal complexes was enhanced by both surfactants because of the shielding and salting effects of inorganic ions on these interactions. Particle surface modification engendered by sorbed surfactant strongly influenced the sorption of Pd and Hg to estuarine particles. Thus, hydrophobically bound SDS enhances the negative charge at the particle surface and favours specific sorption of metal, while specifically sorbed HDTMA enhances the solvency of the particle surface, favouring non-specific sorption of metal complexes. Given the relatively short environmental half-life of SDS, its impacts on strongly complexing metals are predicted to be localised. However, greater stability of HDTMA suggests that its effects on such metals, including enhanced flocculation and sorption, are likely to be more pervasive.

  1. Influence of surfactants on the microstructure and electrochemical performance of the tin oxide anode in lithium ion batteries

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Yan-Hui, E-mail: [School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China); Guangzhou Key Laboratory of Materials for Energy Conversion and Storage, South China Normal University, Guangzhou 510006 (China); Dong, Pei-Pei; Liu, Shan; Nan, Jun-Min [School of Chemistry and Environment, South China Normal University, Guangzhou 510006 (China); Guangzhou Key Laboratory of Materials for Energy Conversion and Storage, South China Normal University, Guangzhou 510006 (China)


    Highlights: • CTAB and SDS alter the formation of SnO{sub 2} from nanosheets to nanocubes during oxalate precipitation. • The CTAB concentration affects the SnO{sub 2} crystal growth direction, morphology and size. • The SnO{sub 2} anode synthesized using CTAB exhibited superior electrochemical performance. • Proposed a mechanism of influence of surfactant on SnO{sub 2} in the precipitation and annealing process. - Abstract: Different SnO{sub 2} micro–nano structures are prepared by precipitation using a surfactant-assisted process. The surfactants, such as cetyltriethylammonium bromide (CTAB) or sodium dodecyl benzene sulfonate (SDBS), can change the crystal growth direction and microstructure of SnO{sub 2} primary and secondary particles. Larger SnO{sub 2} nanosheets were synthesized without surfactant, and micro-fragments composed of small nanospheres or nanocubes were synthesized using CTAB and SDBS. The CTAB-assisted process resulted in smaller primary particles and larger specific surface area and larger pore volume, as a lithium-ion-battery anode that exhibits superior electrochemical performance compared to the other two anodes. Further investigation showed that the concentration of CTAB had a substantial influence on the growth of the crystal face, morphology and size of the SnO{sub 2} secondary particles, which influenced the electrochemical performance of the anode. A simple mechanism for the influence of surfactants on SnO{sub 2} morphology and size in the precipitation and annealing process is proposed.

  2. The effects of pH and surfactants on the absorption and fluorescence properties of ochratoxin A and zearalenone. (United States)

    Li, Taihua; Kim, Bo Bae; Ha, Tae Hwan; Shin, Yong-Beom; Kim, Min-Gon


    The pH and surfactant dependencies of the absorption and fluorescence properties of ochratoxin A (OTA) and zearalenone (ZEN), the main mycotoxins found as contaminants in foods and feeds, were evaluated. Three surfactants with different ionic properties were investigated, namely sodium dodecyl sulfate (SDS, anionic), Tween 20 (nonionic) and hexadecyltrimethylammonium bromide (CTAB, cationic). The results show that the effects of pH on the absorption wavelength maxima and fluorescence efficiencies of the mycotoxins, which are a consequence of the presence of acidic phenol and/or carboxyl containing fluorophores, are dependent on the ionic nature of the added surfactants. Specifically, the fluorescence responses to pH changes of OTA and ZEN are similar in the presence or absence of Tween 20 and SDS. By contrast, the pH-dependent fluorescence properties of these mycotoxins are altered when CTAB is present in the solutions. Moreover, unlike OTA, ZEN in aqueous solution displays almost no fluorescence. However, fluorescence enhancement takes place when surfactants are present in aqueous solutions of this mycotoxin. The results of this study demonstrate that the different microenvironments, present in the organized micellar systems created by the individual surfactants, can be potentially employed to modulate the sensitivities and selectivities of the fluorescence detection of OTA or ZEN. Copyright © 2015 John Wiley & Sons, Ltd.

  3. Biocidal and inhibitory activity screening of de novo synthesized surfactants against two eukaryotic and two prokaryotic microbial species. (United States)

    Tiecco, Matteo; Cardinali, Gianluigi; Roscini, Luca; Germani, Raimondo; Corte, Laura


    Thirty-six quaternary ammonium salts, of which 28 structurally different non-commercially available surfactants, were tested to screen their biocidal and inhibitory antimicrobial activity. Their activity was compared to commercially available amphiphiles as well as to non-amphiphilic quaternary ammonium salts. As target of these compounds four microbial species were employed of which two (Saccharomyces cerevisiae and Candida albicans) were important yeast in the food and clinical environment and the other two (Escherichia coli and Listeria innocua) represented the Gram negative and positive bacteria, respectively. The surfactants showed the ability to kill the microbial cells in water solution and to variably hamper their growth onto agar medium. The non-amphiphilic compounds (which represent analogues of some surfactants used in this study, since they have the same head group but no hydrophobic portion) had little effect in solution and no effect against the microbial growth on plate. Amphoteric and non-amphoteric zwitterionic surfactants showed reduced biocidal activity. The most active antimicrobial agent was N-tetradecyltropinium bromide (23S) surfactant. The presence of cells did not significantly affect the ability to form micelles, as demonstrated by comparative conductometric measurements.

  4. D-glucose derived novel gemini surfactants: synthesis and study of their surface properties, interaction with DNA, and cytotoxicity. (United States)

    Kumar, Vikash; Chatterjee, Amrita; Kumar, Nupur; Ganguly, Anasuya; Chakraborty, Indranil; Banerjee, Mainak


    Four new D-glucose derived m-s-m type gemini surfactants with variable spacer and tail length have been synthesized by a simple and efficient synthetic methodology utilizing the free C-3 hydroxy group of diisopropylidene glucose. The synthetic route to these gemini surfactants with a quaternary ammonium group as polar head group involves a sequence of simple reactions including alkylation, imine formation, quaternization of amine etc. The surface properties of the new geminis were evaluated by surface tension and conductivity measurements. These gemini surfactants showed low cytotoxicity by MTT assay on HeLa cell line. The DNA binding capabilities of these surfactants were determined by agarose gel electrophoresis, fluorescence titration, and DLS experiments. The preliminary studies by agarose gel electrophoresis indicated chain length dependent DNA binding abilities, further supported by ethidium bromide exclusion experiments. Two of the D-glucose derived gemini surfactants showed effective binding with pET-28a plasmid DNA (pDNA) at relatively low N/P ratio (i.e., cationic nitrogen/DNA phosphate molar ratio).

  5. Physical properties of botanical surfactants. (United States)

    Müller, Lillian Espíndola; Schiedeck, Gustavo


    Some vegetal species have saponins in their composition with great potential to be used as natural surfactants in organic crops. This work aims to evaluate some surfactants physical properties of Quillaja brasiliensis and Agave angustifolia, based on different methods of preparation and concentration. The vegetal samples were prepared by drying and grinding, frozen and after chopped or used fresh and chopped. The neutral bar soap was used as a positive control. The drying and grinding of samples were the preparation method that resulted in higher foam column height in both species but Q. brasiliensis was superior to A. angustifolia in all comparisons and foam index was 2756 and 1017 respectively. Critical micelle concentration of Q. brasiliensis was 0.39% with the superficial tension of 54.40mNm(-1) while neutral bar soap was 0.15% with 34.96mNm(-1). Aspects such as genetic characteristics of the species, environmental conditions, and analytical methods make it difficult to compare the results with other studies, but Q. brasiliensis powder has potential to be explored as a natural surfactant in organic farming. Not only the surfactants physical properties of botanical saponins should be taken into account but also its effect on insects and diseases control when decided using them. Copyright © 2017 Elsevier B.V. All rights reserved.

  6. Surfactant gene polymorphisms and interstitial lung diseases

    Directory of Open Access Journals (Sweden)

    Pantelidis Panagiotis


    Full Text Available Abstract Pulmonary surfactant is a complex mixture of phospholipids and proteins, which is present in the alveolar lining fluid and is essential for normal lung function. Alterations in surfactant composition have been reported in several interstitial lung diseases (ILDs. Furthermore, a mutation in the surfactant protein C gene that results in complete absence of the protein has been shown to be associated with familial ILD. The role of surfactant in lung disease is therefore drawing increasing attention following the elucidation of the genetic basis underlying its surface expression and the proof of surfactant abnormalities in ILD.

  7. Metastable fragmentation of silver bromide clusters

    Energy Technology Data Exchange (ETDEWEB)

    L' Hermite, J.M.; Rabilloud, F.; Marcou, L.; Labastie, P. [Lab. CAR/IRSAMC, Univ. Paul Sabatier, Toulouse (France)


    The abundance spectra and the fragmentation channels of silver bromide clusters have been measured and analyzed. The most abundant species are Ag{sub n}Br{sub n} {sub -} {sub 1}{sup +} and Ag {sub n}Br {sub n} {sub +} {sub 1}{sup -} and Ag {sub 14}Br {sub 13}{sup +} is a magic number, revealing their ionic nature. However, some features depart from what is generally observed for alkali-halide ionic clusters. From a certain size, Ag {sub n}Br {sub n} {sub -} {sub 1}{sup +} is no more the main series, and Ag {sub n}Br {sub n} {sub -} {sub 2,} {sub 3}{sup +} series become almost as important. The fast fragmentation induced by a UV laser makes the cations lose more bromine than silver ions and lead to more silver-rich clusters. Negative ions mass spectra contain also species with more silver atoms than required by stoichiometry. We have investigated the metastable fragmentation of the cations using a new experimental method. The large majority of the cations release mainly a neutral Ag {sub 3}Br {sub 3} cluster. These decay channels are in full agreement with our recent ab initio DFT calculations, which show that Ag {sup +}-Ag {sup +} repulsion is reduced due to a globally attractive interaction of their d orbitals. This effect leads to a particularly stable trimer (AgBr) {sub 3} and to quasi-planar cyclic structures of (AgBr) {sub n} clusters up to n = 6. We have shown that these two features may be extended to other silver halides, to silver hydroxides (AgOH) {sub n}, and to cuprous halide compounds. (orig.)

  8. Critical micelle concentration of surfactants in aqueous buffered and unbuffered systems

    Energy Technology Data Exchange (ETDEWEB)

    Fuguet, Elisabet [Departament de Quimica Analitica, Universitat de Barcelona, Facultat de Quimica, Marti i Franques 1-11, 08028 Barcelona (Spain); Rafols, Clara [Departament de Quimica Analitica, Universitat de Barcelona, Facultat de Quimica, Marti i Franques 1-11, 08028 Barcelona (Spain); Roses, Marti [Departament de Quimica Analitica, Universitat de Barcelona, Facultat de Quimica, Marti i Franques 1-11, 08028 Barcelona (Spain); Bosch, Elisabeth [Departament de Quimica Analitica, Universitat de Barcelona, Facultat de Quimica, Marti i Franques 1-11, 08028 Barcelona (Spain)]. E-mail:


    Critical micelle concentration (CMC) of sodium dodecyl sulphate (SDS), lithium perfluorooctanesulfonate (LPFOS), hexadecyltrimethylammonium bromide (HTAB), tetradecyltrimethylammonium bromide (TTAB), and sodium cholate (SC), surfactants commonly used as pseudostationary phases in micellar electrokinetic chromatography (MEKC), have been determined by means of three different methods: MEKC, spectrophotometry, and conductometry. Determinations have been performed in water, and also in different concentrations of phosphate buffer at pH 7.0. CMC values ranging from 8.08 (water) to 1.99 (50 mM phosphate buffer) mM for SDS, from 7.16 (water) to 2,81 (30 mM phosphate buffer) mM for LPFOS, from 3.77 (water) to 1.93 (20 mM phosphate buffer) mM for TTAB, from 0.91 (water) to {approx}0.34 (20 mM phosphate buffer) for HTAB, and around 13 mM (20 mM phosphate buffer) for SC, are obtained. The effect of the electrolyte concentration on the CMC, as well as the linear relationship between the electrolyte counter-ion concentration and the CMC are discussed. This linear relationship provides an easy way for users to estimate the CMC of a MEKC system, at a given electrolyte concentration. A comparison between experimental methods, as well as a discussion about the suitability of a given method for the determination of the CMC for a given surfactant system is also provided.

  9. An anionic surfactant for EOR applications (United States)

    Sagir, Muhammad; Tan, Isa M.; Mushtaq, Muhammad


    This work is to investigate the new anionic surfactants for the Enhanced Oil Recovery (EOR) application. Sulfonated anionic surfactant was produced by attaching SO3 to an ethoxylated alcohol to increase the performance of the surfactant. Methallyl chloride and ethoxylated alcohol was reacted followed by the reaction with sodium bisulfite to produce anionic sulfonated surfactant in 80.3 % yield. The sulfonation reaction parameters such as reactants mole ratio, reaction temperature and catalyst amount were optimized. The generation and stability of foam from the synthesized surfactant is also tested and results are reported. The synthesized novel surfactant was further investigated for the effect on the CO2 mobility in porous media and the findings are presented here. This in house developed surfactant has a great potential for CO2- EOR applications.

  10. Assessment of Ethidium bromide and Ethidium monoazide bromide removal from aqueous matrices by adsorption on cupric oxide nanoparticles. (United States)

    Fakhri, Ali


    The present study was undertaken to develop an effective adsorbent and to study the adsorption of Ethidium bromide and Ethidium monoazide bromide from aqueous solution using the CuO nanoparticles. The characteristics of CuO nanoparticles were determined and found to have a surface area 89.59m(2)/g. Operational parameters such as pH, contact time and adsorbent concentration, initial concentration and temperature were also studied. The amount of removal increases with the increase in pH from one to seven and reaches the maximum when the pH is nine. Adsorption data fitted well with the Langmuir, Freundlich and Florry-Huggins models. The results show that the best fit was achieved with the Langmuir isotherm equation with maximum adsorption capacities of 0.868 and 0.662mg/g for Ethidium bromide and Ethidium monoazide bromide, respectively. The adsorption process was found to follow pseudo-second-order kinetics. The calculated thermodynamic parameters, namely ΔG, ΔH and ΔS showed that adsorption of Ethidium bromide and Ethidium monoazide bromide was spontaneous and endothermic under examined conditions.

  11. Shape and phase control of CdS nanocrystals using cationic surfactant in noninjection synthesis

    Directory of Open Access Journals (Sweden)

    Zou Yu


    Full Text Available Abstract Monodispersed CdS nanocrystals with controllable shape and phase have been successfully synthesized in this study by adding cationic surfactant in noninjection synthesis system. With the increase of the amount of cetyltrimethylammonium chloride (CTAC added, the shape of the CdS nanocrystals changed from spherical to multi-armed, and the phase changed from zinc-blende to wurtzite. It was found that halide ion Cl- plays a key role in the transformation, and other halide ions such as Br- can also induce similar transformation. We proposed that the strong binding between Cd2+ and halide ions reduced the reactivity of the precursors, decreased the nuclei formed in the nucleation stage, and led to the high concentration of precursor in the growth stage, resulting in the increase of size and phase transformation of CdS nanocrystals. In addition, it was found that the multi-armed CdS nanocrystals lost quantum confinement effect because of the increase of the size with the increase of the concentration of CTAC.

  12. The role of specific interaction in phase behavior of polyelectrolyte-surfactant-water mixtures. (United States)

    Sitar, Simona; Goderis, Bart; Hansson, Per; Kogej, Ksenija


    Aqueous phase behavior and structures of phases were studied in systems containing sodium poly(styrenesulfonate), NaPSS, and complex salt CTAPSS, formed between cetyltrimethylammonium cations, CTA+, and PSS- anions. It was shown that hydrophobic interaction of the polyion styrene groups with surfactant aggregates, which supports the strong electrostatic attraction between CTA+ and PSS-, has a significant effect on phase behavior and structures. Only the disordered micellar (L1) and the ordered hexagonal (H1) phase were found that are connected over a broad two-phase region of L1-H1 coexistence. At water contents above 60 wt%, CTAPSS is easily dissolved in proportion to the amount of added NaPSS, whereas at lower water contents a large excess of NaPSS is needed to dissolve CTAPSS. Phase separation in the two-phase region is controlled by two tendencies: (i) to maximize the contact between the hydrophobic groups and micelles (assisted by hydrophobic interaction) and (ii) to form as dense phase as possible (assisted by both, electrostatic and hydrophobic interactions). Structural characteristics of soluble non-stoichiometric complexes from the L1 phase show that hydrophobic interaction contributes also to a relatively small size of PSS-induced micelles and leads to a network-like association between PSS chains in which micelles serve as cross-links.

  13. Separation of linear synthetic polymers in non-aqueous capillary zone electrophoresis using cationic surfactant. (United States)

    Yamamura, Tomoyuki; Kitagawa, Shinya; Ohtani, Hajime


    A method for separating water-insoluble and neutral synthetic polymers using non-aqueous capillary zone electrophoresis (NACZE) was developed. The non-aqueous solvent system comprising a mixture of tetrahydrofuran, acetonitrile, and ethanol containing cetyltrimethylammonium chloride was used for solubilizing and conferring positive charges to the polymers. A mixture of polystyrene (PS, Mn=6500) and polybutadiene (PBD, Mn=5900) was successfully separated by the NACZE method using cationic surfactants. Evaluation of the effect of the molecular weight of the polymers on the electrophoretic behavior demonstrated that PSs with different molecular weights (Mn=6500, 10,200, 19,600, 200,000) were co-eluted as a single peak. That is, the apparent electrophoretic mobility of the PSs was independent of the molecular weight. In contrast, evaluation of PBD and polycarbonate (PC) demonstrated that the solubility of polymers in the medium affected the apparent electrophoretic mobility of the polymers, where low solubility resulted in reduced apparent electrophoretic mobility. Using the proposed method, poly(styrene-co-methylmethacrylate)s with different compositions were successfully separated. Copyright © 2015 Elsevier B.V. All rights reserved.

  14. A coacervative extraction based on single-chain and double-chain cationic surfactants. (United States)

    Kukusamude, Chunyapuk; Quirino, Joselito P; Srijaranai, Supalax


    A coacervative extraction (CAE) with the common cationic surfactants dodecyltrimethylammonium bromide (DTAB) and didodecyldimethylammonium bromide (DDAB) was firstly developed. Notable characteristics of the CAE was the use of low concentration of salt (0.1molL(-1) NaBr) at ambient temperature and without the requirement of organic solvent. The CAE was based on phase separation due to the neutralization of the surface charge of the micelle by electrostatic interaction with the predominant common counter ion (bromide). The coacervative phase was subjected to an optimized micellar liquid chromatography with UV (MLC-UV) method without any treatments. The method was applied to the determination of penicillins including amoxicillin, ampicillin, penicillin-G, oxacillin, and cloxacillin in milk samples. Method detection limits (MDLs) from standard were 0.5-2ngmL(-1), and 40-80-fold analyte enrichment were obtained. The CAE-MLC-UV has shown to be of high potential for the analysis of five penicillins in milk with recoveries >90%.

  15. Application of TiO2-organobentonite modified by cetyltrimethylammonium chloride photocatalyst and polyaluminum chloride coagulant for pretreatment of aging landfill leachate. (United States)

    Zhang, Yi-Jie; Yang, Zhao-Hui; Song, Pei-Pei; Xu, Hai-Yin; Xu, Rui; Huang, Jing; Li, Juan; Zhou, Yan


    This study investigated the treatment performance for aging leachate containing refractory organic pollutants by TiO2-organobentonite photocatalyst combined with polyaluminum chloride (PAC) coagulant. TiO2 was immobilized on organobentonite granules as a supporter modified by cetyltrimethylammonium chloride (CTAC). The prepared catalysts were characterized by ESEM, FTIR, and XRD analysis, which showed that TiO2-organobentonite catalyst had uniform coating of TiO2 on support. Chemical oxygen demand (COD) and NH3-N removal rates by combination of TiO2-CTAC2.0 photocatalysis and PAC coagulation were evaluated, optimized, and compared to that by either treatment alone, with respect to TiO2-CTAC2.0 dose, photocatalytic contact time, pH, and PAC dose. Furthermore, higher removal rates (COD 80 %; NH3-N 46 %) were achieved by response surface methodology (RSM) when TiO2-CTAC2.0 photocatalysis was followed by PAC coagulation at optimized conditions. The optimized experimental conditions were TiO2-CTAC2.0 dosage of 5.09 g/L, at pH 5.53, photocatalytic contact time for 180 min, and PAC dosage of 1062 mg/L.

  16. Interaction between dodecyl oxypropyl β-hydroxyltrimethylammonium bromide and Xanthan: MesoDyn simulation and binding isotherm measurements

    Institute of Scientific and Technical Information of China (English)


    MesoDyn density functional simulation method is used to study the interactions between dodecyl oxypropyl β-hydroxyltrimethylammonium bromide (C12NBr) and Xanthan (XC). The micro dynamic process of aggregate formation and the aggregate morphology are reported. Interaction between XC and nonyphenyloxypropylβ-hydroxyltrimethylammonium bromide (C9phNBr) is compared with that between XC and C12NBr. Simulation results show that the aggregate morphology of XC/C12NBr and XC/C9phNBr is of rod-like shape with helix characteristic. The binding of C9phNBr to XC is more difficult than that of C12NBr to XC. In addition, three stages for the dynamic evolution of surfactant binding to XC are observed. The simulation results agree with binding isotherms of C9phNBr (C12NBr) to XC obtained via the potentiometric titration method, which shows a typical cooperative binding between C9phNBr (C12NBr) and XC.

  17. Phospholipid containing mixed micelles. Characterization of diheptanoyl phosphatidylcholine (DHPC) and sodium dodecyl sulfate and DHPC and dodecyl trimethylammonium bromide. (United States)

    Ranganathan, Radha; Vautier-Giongo, Carolina; Bakshi, Mandeep Singh; Bales, Barney L; Hajdu, Joseph


    Mixed micelles of l,2-diheptanoyl-sn-grycero-3-phosphocholine (DHPC) with ionic detergents were prepared to develop well characterized substrates for the study of lipolytic enzymes. The aggregates that formed on mixing DHPC with the anionic surfactant sodium dodecyl sulfate (SDS) and with the positively charged dodecyl trimethylammonium bromide (DTAB) were investigated using time-resolved fluorescence quenching (TRFQ) to determine the aggregation numbers and bimolecular collision rates, and electron spin resonance (ESR) to measure the hydration index and microviscosity of the micelles at the micelle-water interface. Mixed micelles between the phospholipid and each of the detergents formed in all compositions, yielding interfaces with varying charge, hydration, and microviscosity. Both series of micelles were found to be globular up to 0.7 mole fraction of DHPC, while the aggregation numbers varied within the same concentration range of the components less than 15%. Addition of the zwitterionic phospholipid component increased the degree of counterion dissociation as measured by the quenching of the fluorescence of pyrene by the bromide ions bound to DHPC/DTAB micelles, showing that at 0.6 mole fraction of DHPC 80% of the bromide ions are dissociated from the micelles. The interface water concentration decreased significantly on addition of DHPC to each detergent. For combined phospholipid and detergent concentration of 50 mM the interface water concentration decreased, as measured by ESR of the spin-probes, from 38.5 M/L of interface volume in SDS alone to 9 M/L when the phospholipid was present at 0.7 mole fraction. Similar addition of DHPC to DTAB decreased the interfacial water concentration from 27 M/L to 11 M/L. Determination of the physicochemical parameters of the phospholipid containing mixed micelles here presented are likely to provide important insight into the design of assay systems for kinetic studies of phospholipid metabolizing enzymes.

  18. Adsorption of dimeric surfactants in lamellar silicates

    Energy Technology Data Exchange (ETDEWEB)

    Balcerzak, Mateusz; Pietralik, Zuzanna [Department of Macromolecular Physics, Faculty of Physics, A. Mickiewicz University, Umultowska 85, 61-614 Poznań (Poland); Domka, Ludwik [Department of Metalorganic Chemistry, Faculty of Chemistry, A. Mickiewicz University, Grunwaldzka 6, 60-780 Poznań (Poland); Skrzypczak, Andrzej [Institute of Chemical Technology, Poznań University of Technology, Berdychowo 4, 60-965 Poznań (Poland); Kozak, Maciej, E-mail: [Department of Macromolecular Physics, Faculty of Physics, A. Mickiewicz University, Umultowska 85, 61-614 Poznań (Poland)


    Highlights: • The intercalation of dimeric surfactants changed the morphology of MMT samples. • XRD indicated structures formed by surfactant molecules in interlayer space. • The four-step thermal decomposition of dimeric surfactant, confirms intercalation. - Abstract: The adsorption of different types of cationic surfactants in lamellar silicates changes their surface character from hydrophilic to hydrophobic. This study was undertaken to obtain lamellar silicates modified by a series of novel dimeric (gemini) surfactants of different length alkyl chains and to characterise these organophilised materials. Synthetic sodium montmorillonite SOMASIF® ME 100 (M) and enriched bentonite of natural origin (Nanoclay – hydrophilic bentonite®) were organophilised with dimeric (gemini) surfactants (1,1′-(1,4-butanediyl)bis(alkoxymethyl)imidazolium dichlorides). As a result of surfactant molecule adsorption in interlamellar space, the d-spacing (d{sub 001}) increased from 0.97 nm (for the anhydrous structure) to 2.04 nm. A Fourier transform infrared spectroscopy (FTIR) analysis of the modified systems reveals bands assigned to the stretching vibrations of the CH{sub 2} and CH{sub 3} groups and the scissoring vibrations of the NH group from the structure of the dimeric surfactants. Thermogravimetric (TG) and derivative thermogravimetric (DTG) studies imply a four-stage process of surfactant decomposition. Scanning electron microscopy (SEM) images provide information on the influence of dimeric surfactant intercalation into the silicate structures. Particles of the modified systems show a tendency toward the formation of irregularly shaped agglomerates.

  19. Monomeric and gemini surfactants as antimicrobial agents - influence on environmental and reference strains. (United States)

    Koziróg, Anna; Brycki, Bogumił


    Quaternary ammonium salts (QAS) belong to surfactant commonly used both, in the household and in different branches of industry, primarily in the process of cleaning and disinfection. They have several positive features inter alia effectively limiting the development of microorganisms on many surfaces. In the present work, two compounds were used as biocides: hexamethylene-1,6-bis-(N,N-dimethyl-N-dodecylammonium bromide) that belongs to the gemini surfactant (GS), and its single analogue - dodecyl(trimethyl)ammonium bromide (DTAB). Two fold dilution method was used to determine the minimum concentration of compounds (MIC) which inhibit the growth of bacteria: Staphylococcus aureus (ATCC 6538 and an environmental strain), Pseudomonas aeruginosa (ATCC 85327 and an environmental strain), and yeast Candida albicans (ATCC 11509 and an environmental strain). The viability of cells in liquid cultures with addition of these substances at ¼ MIC, ½ MIC and MIC concentrations were also determined. The obtained results show that DTAB inhibits the growth of bacteria at the concentration of 0.126-1.010 µM/ml, and gemini surfactant is active at 0.036-0.029 µM/ml. Therefore, GS is active at more than 17-70-fold lower concentrations than its monomeric analogue. Strains isolated from natural environment are less sensitive upon testing biocides than the references strains. Both compounds at the MIC value reduced the number of cells of all strains. The use of too low concentration of biocides can limit the growth of microorganisms, but often only for a short period of time in case of special environmental strains. Later on, they can adapt to adverse environmental conditions and begin to evolve defence mechanisms.

  20. Removal of nitrate from aqueous solution using cetylpyridinium bromide (CPB) modified zeolite as adsorbent

    Energy Technology Data Exchange (ETDEWEB)

    Zhan Yanhui [State Key Laboratory of Pollution Control and Resource Reuse, Tongji University, Shanghai 200092 (China); Lin Jianwei, E-mail: [College of Marine Science, Shanghai Ocean University, No. 999 Hucheng Huan Road, Pudong District, Shanghai 201306 (China); Zhu Zhiliang [State Key Laboratory of Pollution Control and Resource Reuse, Tongji University, Shanghai 200092 (China)


    Surfactant modified zeolites (SMZ) with different coverage types were prepared by loading the cetylpyridinium bromide (CPB) onto the surface of the natural zeolites. The adsorption behavior of nitrate on SMZ was investigated. Natural zeolite and SMZ with monolayer CPB coverage were inefficient for the removal of nitrate from aqueous solution. However, SMZ with patchy bilayer or bilayer CPB coverage was efficient in nitrate removal, and the nitrate adsorption capacity of SMZ increased with its CPB loading. For typical SMZ with bilayer CPB coverage, the nitrate adsorption process was well described by the pseudo-second-order kinetic model, and the experimental isotherm data fitted well with the Langmuir, Freundlich and Dubinin-Redushkevich isotherm models. Thermodynamic parameters such as Gibbs free energy change, enthalpy change and entropy change were calculated and the results showed that the adsorption of nitrate on SMZ was spontaneous and exothermic in nature. The presence of competing anions such as chloride, sulfate and bicarbonate ions slightly reduced the nitrate adsorption efficiency. Anionic exchange and electrostatic interaction were proven to be the main mechanisms that govern the adsorption of nitrate on SMZ.

  1. Bromide-Assisted Anisotropic Growth of Gold Nanoparticles as Substrates for Surface-Enhanced Raman Scattering

    Directory of Open Access Journals (Sweden)

    Melissa A. Kerr


    Full Text Available We report herein a one-step synthesis of gold nanoparticles (Au NPs of various shapes such as triangles, hexagons, and semispheres, using 5-hydroxyindoleacetic acid (5-HIAA as the reducing agent in the presence of potassium bromide (KBr. Anisotropic Au NPs have received ever-increasing attention in various areas of research due to their unique physical and chemical properties. Numerous synthetic methods involving either top-down or bottom-up approaches have been developed to synthesize Au NPs with deliberately varied shapes, sizes, and configurations; however, the production of templateless, seedless, and surfactant-free singular-shaped anisotropic Au NPs remains a significant challenge. The concentrations of hydrogen tetrachloroaurate (HAuCl4, 5-HIAA, and KBr, as well as the reaction temperature, were found to influence the resulting product morphology. A detailed characterization of the resulting Au NPs was performed using ultraviolet-visible (UV-Vis spectroscopy, scanning electron microscopy (SEM, and Raman spectroscopy. The as-prepared Au NPs exhibited excellent surface-enhanced Raman scattering (SERS properties, which make them very attractive for the development of SERS-based chemical and biological sensors.

  2. Removal of nitrate from aqueous solution using cetylpyridinium bromide (CPB) modified zeolite as adsorbent. (United States)

    Zhan, Yanhui; Lin, Jianwei; Zhu, Zhiliang


    Surfactant modified zeolites (SMZ) with different coverage types were prepared by loading the cetylpyridinium bromide (CPB) onto the surface of the natural zeolites. The adsorption behavior of nitrate on SMZ was investigated. Natural zeolite and SMZ with monolayer CPB coverage were inefficient for the removal of nitrate from aqueous solution. However, SMZ with patchy bilayer or bilayer CPB coverage was efficient in nitrate removal, and the nitrate adsorption capacity of SMZ increased with its CPB loading. For typical SMZ with bilayer CPB coverage, the nitrate adsorption process was well described by the pseudo-second-order kinetic model, and the experimental isotherm data fitted well with the Langmuir, Freundlich and Dubinin-Redushkevich isotherm models. Thermodynamic parameters such as Gibbs free energy change, enthalpy change and entropy change were calculated and the results showed that the adsorption of nitrate on SMZ was spontaneous and exothermic in nature. The presence of competing anions such as chloride, sulfate and bicarbonate ions slightly reduced the nitrate adsorption efficiency. Anionic exchange and electrostatic interaction were proven to be the main mechanisms that govern the adsorption of nitrate on SMZ.

  3. Spectroscopic study of tetradecyltrimethylammonium bromide Pt-C14TAB nanoparticles: Structure and Stability

    Energy Technology Data Exchange (ETDEWEB)

    Borodko, Y.; Jones, L.; Frei, H.; Somorjai, G.


    The vibrational spectra of platinum nanoparticles (12 nm) capped with tetradecyltrimethylammonium bromide, C{sub 14}TAB, were investigated by Fourier transform infrared (FTIR) spectroscopy. We have shown that the thermal decay of Pt-C{sub 14}TAB nanoparticles in N{sub 2}, H{sub 2} and O{sub 2} atmospheres leads to the release of hydrocarbon chain of surfactant and the formation of strongly bonded layer of ammonium cations on the platinum surface. The platinum atoms accessible to CO chemisorptions were not reducible by hydrogen in the temperature ranging from 30 C to 200 C. A FTIR spectrum of C{sub 14}TAB adsorbed on Pt nanoparticles dramatically perturbed as compared with pure C{sub 14}TAB. New intense and broad bands centered at 1450 cm{sup -1} and 760 cm{sup -1} are making their appearance in Pt-C{sub 14}TAB. It may be speculated, that new bands are result of coupling between conducting electrons of Pt and molecular vibrations of adsorbed C{sub 14}TAB and as a consequence specific vibrational modes of ammonium cation transformed into electron-vibrational modes.

  4. Surfactant-assisted sacrificial template-mediated synthesis, characterization and photoluminescent properties of LaPO₄ : Eu³⁺ phosphor

    Indian Academy of Sciences (India)



    In this paper, we report a surfactant-assisted self-sacrificing route for synthesis of Eu³⁺ doped LaPO4 nanostructures under hydrothermal conditions using the La(OH)CO₃ : Eu³⁺ precursor as a template andNH₄H₂PO₄ as the phosphate source. The synthesis was carried out in the absence and presence of surfactant [cetyltrimethyl ammonium bromide (CTAB)] and two different solvents (water and ethylene glycol). The precursor and products were characterized by powder X-ray diffraction, fourier transform infrared spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, energy dispersive spectroscopyand photoluminescence studies. Influence of surfactant and solvents on morphology and luminescence of the final product in sacrificial template-assisted method has been investigated in detail.

  5. Synthesis and characterization of zeolite from coal ashes modified by cationic surfactant; Sintese e caracterizacao de zeolita de cinzas de carvao modificada por surfactante cationico

    Energy Technology Data Exchange (ETDEWEB)

    Fungaro, D.A.; Borrely, S.I., E-mail: [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)


    Zeolite synthesized from coal fly ash was modified with different concentrations (2 and 20 mmol.L{sup -1}) of hexadecyltrimethylammonium bromide (HDTMA-Br). The Non-Modified Zeolite (NMZ) and Surfactant-Modified Zeolites (SMZ) were characterized by X-ray fluorescence spectrometry, X-ray diffraction, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy, thermogravimetric analysis, among others. The SMS presented negative charge probably due to the formation of a partial bilayer of HDTMA on exchangeable active sites on the external surface of NMZ. A decrease in surface area was observed for SMZ as compared to NMZ indicating zeolite surface coverage with HDTMA-Br molecules. The crystalline nature of the zeolite remained intact after adsorption of surfactant and heating for drying. FTIR analysis indicated that there were no significant changes in the structure of the zeolite after adsorption of surfactant. (author)

  6. 叶面肥和表面活性剂对辣椒表皮百菌清的光化学降解的影响%Effects of Foliar-fertilizer and Surfactant on Photochemical Degradation of Chlorothalonil in the Epidermis of Pepper

    Institute of Scientific and Technical Information of China (English)

    徐勇; 凌秋霞; 花日茂; 李学德; 操海群


    [Objective] The aim was to study effects of foliar-fertilizer and surfactant on photochemical degradation of chlorothalonil in the epidermis of pepper. [Method] Through the epidermis of pepper was added with chlorothalonil under high pressure mercury lamp,the effects of foliar-fertilizer (foliar trace fertilizer and foliar nitrogen) and three kinds of surfactants [sodium dodecylbenzene sulfonate (SDBS) ,Tween-80 and cetyltrimethylammonium bromide (CTAB) ] on photochemical degradation of chlorothalonil in the epidermis of pepper. [ Result] Under high pressure mercury lamp,foliar trace fertilizer and foliar nitrogen showed intensive photoquench effects on the photolysis of chlorothalonil,with photo-quench efficiency of 89.5% and 174.6%. SDBS and Tween-80 enhanced the photodegradation of chlorothalonil,with the photodegradation half-lives of 2.23 h and 4. 30 h,while CTAB showed photoquench effect on the photolysis of chlorothalonil,with the photodegradation half-live of 7.10 n. [Conclusion] The research result provides theoretical basis for choosing fertilizer and pesticides in agricultural production and study on transformation and trend of chlorothalonil in environment.%[目的]探究叶面肥和表面活性剂对辣椒表皮百菌清的光化学降解的影响.[方法]以高压汞灯为光源,在辣椒表面定量添加百菌清,研究叶面肥(叶面微肥和叶面氮肥)和3种不同类型的表面活性剂(十二烷基苯磺酸钠、吐温-80和十六烷基三甲基溴化铵)对百菌清在辣椒表皮光化学降解的影响.[结果]在高压汞灯下,按推荐剂量添加的叶面微肥和叶面氮肥对百菌清的光化学降解都有强烈的光猝灭作用,光猝灭率分别为89.5%和174.6%.添加十二烷基苯磺酸钠和吐温-80对百菌清的光化学降解均具有光敏作用,光解半衰期T1/2分别为2.23和4.30 h;添加十六烷基三甲基溴化铵对百菌清的光化学降解具有光猝灭作用,光解半衰期T1/2为7.10 h.[结论]为

  7. Surfactants in tribology, v.3

    CERN Document Server

    Biresaw, Girma


    The manufacture and use of almost every consumer and industrial product rely on application of advanced knowledge in surface science and tribology. These two disciplines are of critical importance in major economic sectors, such as mining, agriculture, manufacturing (including metals, plastics, wood, computers, MEMS, NEMS, appliances), construction, transportation, and medical instruments, transplants, and diagnostic devices. An up-to-date reference with contributions by experts in surface science and tribology, Surfactants in Tribology, Volume 3 discusses some of the underlying tribological a

  8. Anaerobic Biodegradation of Detergent Surfactants


    Erich Jelen; Ute Merrettig-Bruns


    Detergent surfactantscan be found in wastewater in relevant concentrations. Most of them are known as ready degradable under aerobic conditions, as required by European legislation. Far fewer surfactants have been tested so far for biodegradability under anaerobic conditions. The natural environment is predominantly aerobic, but there are some environmental compartments such as river sediments, sub-surface soil layer and anaerobic sludge digesters of wastewater treatment plants which have str...

  9. Surfactant inhibition in acute respiratory failure : consequences for exogenous surfactant therapy

    NARCIS (Netherlands)

    E.P. Eijking (Eric)


    textabstractThe neonatal respiratory distress syndrome (RDS) is characterized by immaturity of the lung, resulting in relative or absolute absence of pulmonary surfactant. Worldwide, neonates suffering from RDS have been treated successfully with exogenous surfactant preparations. Currently, exogeno

  10. Clinical potential of aclidinium bromide in chronic obstructive pulmonary disease

    Directory of Open Access Journals (Sweden)

    Zhong J


    Full Text Available Jun Zhong, Michael Roth Pneumology and Pulmonary Cell Research, Department of Biomedicine and Internal Medicine, University Hospital Basel, Basel, Switzerland Abstract: Chronic obstructive pulmonary disease (COPD is increasing worldwide and is predicted to become the third most frequent cause of death by 2030. Muscarinic receptor antagonists, alone or in combination with long-acting ß2-agonists, are frequently used for COPD therapy. Aclidinium bromide is a novel muscarinic receptor antagonist, and clinical studies indicate that its metabolism is more rapid than that of other muscarinic receptor inhibitors, so systemic side effects are expected to occur less frequently. Aclidinium bromide is well tolerated, and when compared with other muscarinic receptor antagonists, the drug achieves better control of lung function, especially night-time symptoms in COPD patients. This review summarizes the safety profile and side effects reported by recent clinical studies using aclidinium bromide alone. Keywords: aclidinium, tiotropium, side effects, clinical safety

  11. Water- Lithium Bromide-γ- Butyrolactone Absorption Refrigerating Machine (United States)

    Iyoki, Shigeki; Uemura, Tadashi

    This investigation was carried out in order to find corrosion inhibitors which would be effective in controlling the corrosion for the water-lithium bromide-γ-butyrolactone (20 moles water/1 mole γ-butyrolactone) absorption refrigerating machine. The experiments were carried out on continuous boiling test, intermittent boiling test and galvanic corrosion test with the use of organic inhibitors and inorganic inhibitors in γ-butyrolactone aqueous solution of lithium bromide. The metals used in these corrosion tests were mainly SS 41 and copper. From these experimental results, the most suitable corrosion inhibitors for SS 41 and copper in γ-butyrolactone aqueous solution of lithium bromide Were recognized to be benzotriazole, tolyltriazole and lithium molybdate.

  12. Intensification of sonochemical degradation of malachite green by bromide ions. (United States)

    Moumeni, Ouarda; Hamdaoui, Oualid


    Sonochemical oxidation has been investigated as a viable advanced oxidation process (AOP) for the destruction of various pollutants in water. Ultrasonic irradiation generates ()OH radicals that can recombine, react with other gaseous species present in the cavity, or diffuse out of the bubble into the bulk liquid medium where they are able to react with solute molecules. The extent of degradation of an organic dye such as malachite green (MG) is limited by the quantity of hydroxyl radicals diffused from cavitation bubbles. In this work, the effect of bromide ions on sonolytic degradation of MG was investigated. The obtained results clearly demonstrated the considerable enhancement of sonochemical destruction of MG in the presence of bromide. No significant differences were observed in the presence of chloride and sulfate, excluding the salting-out effect. Positive effect of bromide ions, which increases with increasing bromide level and decreasing MG concentration, is due to the generation of dibromine radical anion (Br(2)(-)) formed by reaction of Br(-) with ()OH radicals followed by rapid complexation with another anion. The generated Br(2)(-) radicals, reactive but less than ()OH, are likely able to migrate far from the cavitation bubbles towards the solution bulk and are suitable for degradation of an organic dye such as MG. Additionally, Br(2)(-) radicals undergo radical-radical recombination at a lesser extent than hydroxyl radicals and would be more available than ()OH for substrate degradation, both at the bubble surface and in the solution bulk. This effect compensates for the lower reactivity of Br(2)(-) compared to ()OH toward organic substrate. Addition of bromide to natural and sea waters induces a slight positive effect on MG degradation. In the absence of bromide, ultrasonic treatment for the removal of MG was promoted in complex matrices such as natural and sea waters.

  13. Interactions between fluorinated cationic guar gum and surfactants in the dilute and semi-dilute solutions. (United States)

    Wang, Chen; Li, Xiaorui; Li, Peizhi; Niu, Yuhua


    The interactions between the fluorinated cationic guar gum (FCGG) and ionic surfactants including cetyl trimethyl ammonium bromide (CTAB) and sodium lauryl sulfate (SDS) were studied by light scattering, fluorescence spectroscopy, UV-spectrophotometer, (19)F NMR and dynamic rheometer, respectively. The FCGG is prepared with cationic guar gum, isophorone diisocyanate and 2,2,3,4,4,4-hexafluoro-1-butanol. The results show that, with the addition of the surfactants, the stretching degree of the FCGG chains is increased in the FCGG/CTAB solutions, while the dramatical shrinking of FCGG chain, the phase separation and the re-stretched macromolecules appear successively because of the electricity neutralization reaction in the FCGG/SDS system. The mixed hydrophobic domains in all solutions will be reinforced and then dismantled. The solution elasticity shows up the maximum value accordingly. The surfactants can be embedded in the micro-domains and then hinder the fluorinated segmental motions. The interactions between FCGG and SDS are much stronger than those between FCGG and CTAB.

  14. Interaction of Moringa oleifera seed protein with a mineral surface and the influence of surfactants. (United States)

    Kwaambwa, Habauka M; Hellsing, Maja S; Rennie, Adrian R; Barker, Robert


    The paper describes the adsorption of purified protein from seeds of Moringa oleifera to a sapphire interface and the effects of addition of the anionic surfactant sodium dodecylsulfate (SDS) and the cationic surfactant hexadecyltrimethylammonium bromide (CTAB). Neutron reflection was used to determine the structure and composition of interfacial layers adsorbed at the solid/solution interface. The maximum surface excess of protein was found to be about 5.3 mg m(-2). The protein does not desorb from the solid/liquid interface when rinsed with water. Addition of SDS increases the reflectivity indicating co-adsorption. It was observed that CTAB is able to remove the protein from the interface. The distinct differences to the behavior observed previously for the protein at the silica/water interface are identified. The adsorption of the protein to alumina in addition to other surfaces has shown why it is an effective flocculating agent for the range of impurities found in water supplies. The ability to tailor different surface layers in combination with various surfactants also offers the potential for adsorbed protein to be used in separation technologies.

  15. Uptake of permanganate from aqueous environment by surfactant modified montmorillonite batch and fixed bed studies

    Indian Academy of Sciences (India)

    N Mahadevaiah; B Vijayakumar; K Hemalatha; B S Jai Prakash


    Organo-clay was prepared by incorporating different amounts (in terms of CEC, ranging from 134–840 mg of quaternary ammonium cation (QACs) such as hexadecytrimethylammonium bromide ([C19H42N]Br) into the montmorillonite clay. Prepared organo-clays are characterized by CHN analyser and XRD to measure the amount of elemental content and interlayer spacing of surfactant modified clay. The batch experiments of sorption of permanganate from aqueous media by organo-clays was studied at different acidic strengths (pH 1–7). The experimental results show that the rate and amount of adsorption of permanganate was higher at lower pH compared to raw montmorillonite. Laboratory fixed bed experiments were conducted to evaluate the breakthrough time and nature of breakthrough curves. The shape of the breakthrough curves shows that the initial cationic surfactant loadings at 1.0 CEC of the clay is enough to enter the permanganate ions in to the interlamellar region of the surfactant modified smectile clays. These fixed bed studies were also applied to quantify the effect of bed-depth and breakthrough time during the uptake of permanganate. Calculation of thermodynamic parameters shows that the sorption of permanganate is spontaneous and follows the first order kinetics.

  16. A Solid Phase Vibrational Circular Dichroism Study of Polypeptide-Surfactant Interaction. (United States)

    Novotná, Pavlína; Urbanová, Marie


    We studied the interaction of poly-l-lysine (PLL) and poly-l-arginine (PLAG) with sodium dodecyl sulfate (SDS) surfactant and the interaction of poly-l-glutamic acid (PLGA) and poly-l-aspartic acid (PLAA) with tetradecyltrimethylammonium bromide (TTAB) surfactant using vibrational circular dichroism (VCD) spectroscopy in the region of C-H stretching vibration and in the Amide I region both in solution and in mulls. A chirality transfer from polypeptides to achiral surfactants was observed in the C-H stretching region, where measurements in solution were impossible. This observation was enabled by a special sample treatment technique using lyophilization and the preparation of mulls. This technique demonstrated itself as an interesting and beneficial tool for VCD measurements. In addition, we observed that SDS changed the secondary structure of PLL to the β-sheet and of PLAG to the α-helix. TTAB disrupted the PLGA and PLAA structure. These results were obtained in the mull but were confirmed by the VCD spectra measured in solution and by electronic circular dichroism. The chirality transfer from the polypeptides to SDS was caused by polypeptides ordered into a specific conformation during the interaction, while in the TTBA system it was induced primarily by the chirality of the amino acid residues. © 2015 Wiley Periodicals, Inc.

  17. Surfactant modified coir pith, an agricultural solid waste as adsorbent for phosphate removal and fertilizer carrier to control phosphate release. (United States)

    Namasivayam, C; Kumar, M V Suresh


    The surface of coir pith, an agricultural solid waste was modified using a cationic surfactant, hexadecyltrimethylammonium bromide (HDTMA) and the modified coir pith was investigated to assess the capacity for the removal of phosphate from aqueous solution. Optimum pH for maximum phosphate adsorption was found to be 4.0. Langmuir and Freundlich isotherms were used to model the adsorption equilibrium data. Kinetic studies showed that the adsorption obeyed second order kinetics. Thermodynamic parameters were evaluated and the overall adsorption process was spontaneous and endothermic. Effect of coexisting anions has also been studied. The feasibility of using spent adsorbent as fertilizer carrier to control phosphate release was also investigated.

  18. Glycosylation with Disarmed Glycosyl Bromides Promoted by Iodonium Ions

    DEFF Research Database (Denmark)

    Lanz, Gyrithe; Madsen, Robert


    Iodonium ions have been developed for activating glycosyl bromides in the coupling to glycosyl acceptors. The iodonium ions are generated from N-iodosuccinimide and a protic acid such as camphorsulfonic acid or triflic acid, where the latter gives the most reactive promoter system. The couplings...... occur with the release of iodine monobromide, and the best results are obtained with benzoylated glycosyl donors and acceptors. In this way, disarmed glycosyl bromides can serve as glycosyl donors without the use of heavy-metal salts....

  19. Preparation and characterization of rosin glycerin ester and its bromide

    Institute of Scientific and Technical Information of China (English)

    Yu Caili; Zhang Faai


    Rosin glycerin ester and its bromide were prepared from natural renewable rosin,glycerin and liquid bromine which were first subjected to an esterification reaction,followed by an addition reaction.Their structures were characterized by an infrared(IR)spectrum and their thermal resistance was conducted with thermal gravity(TG)and differential scanning calorimetry(DSC).It showed that the bromide in the rosin glycerin ester decomposed faster than the ester;hence it may be used as fire-resistant material.

  20. Solubilization of Hydrophobic Dyes in Surfactant Solutions

    Directory of Open Access Journals (Sweden)

    Ali Reza Tehrani-Bagha


    Full Text Available In this paper, the use of surfactants for solubilization of hydrophobic organic dyes (mainly solvent and disperse dyes has been reviewed. The effect of parameters such as the chemical structures of the surfactant and the dye, addition of salt and of polyelectrolytes, pH, and temperature on dye solubilization has been discussed. Surfactant self-assemble into micelles in aqueous solution and below the concentration where this occurs—the critical micelle concentration (CMC—there is no solubilization. Above the CMC, the amount of solubilized dye increases linearly with the increase in surfactant concentration. It is demonstrated that different surfactants work best for different dyes. In general, nonionic surfactants have higher solubilization power than anionic and cationic surfactants. It is likely that the reason for the good performance of nonionic surfactants is that they allow dyes to be accommodated not only in the inner, hydrocarbon part of the micelle but also in the headgroup shell. It is demonstrated that the location of a dye in a surfactant micelle can be assessed from the absorption spectrum of the dye-containing micellar solution.

  1. Using biologically soft surfactants for dust suppression

    Energy Technology Data Exchange (ETDEWEB)

    Tkachenko, N.G.; Kolodiichak, V.K.; Motrii, A.E.; Severin, V.D.


    This article discusses environmental aspects of using surfactants in coal mines for dust suppression. Surfactants for underground black coal mines in the USSR are divided into three classes: so-called soft surfactants with a decomposition period from 1 to 3 days, hard surfactants with decomposition exceeding a month and an intermediary group. The decomposition process is analyzed; the role played by fermentation is stressed. Environmental effects of surfactant decomposition are evaluated. Selected surfactants tested in Soviet laboratories are described. The results of experimental use of diethanolamide as a surfactant for water injection in coal seams are evaluated. Wetting time amounts to 1 s when a 0.2% concentration is used. When surfactant concentration in water is reduced to 0.05% wetting time does not change; when concentration decreases to 0.025% wetting time increases to 3 s. Surfactant efficiency is investigated under operational conditions in a Donbass mine. Specifications of the working face, mining system and air pollution caused by a shearer loader are discussed. When diethanolamide is used dust suppression efficiency ranges from 86.4 to 90.4%. During the tests diethanolamide concentration in water was 0.05%.

  2. Remediation using trace element humate surfactant

    Energy Technology Data Exchange (ETDEWEB)

    Riddle, Catherine Lynn; Taylor, Steven Cheney; Bruhn, Debra Fox


    A method of remediation at a remediation site having one or more undesirable conditions in which one or more soil characteristics, preferably soil pH and/or elemental concentrations, are measured at a remediation site. A trace element humate surfactant composition is prepared comprising a humate solution, element solution and at least one surfactant. The prepared trace element humate surfactant composition is then dispensed onto the remediation site whereby the trace element humate surfactant composition will reduce the amount of undesirable compounds by promoting growth of native species activity. By promoting native species activity, remediation occurs quickly and environmental impact is minimal.

  3. Surfactant nebulisation : lung function, surfactant distribution and pulmonary blood flow distribution in lung lavaged rabbits

    NARCIS (Netherlands)

    Dijk, Peter H.; Heikamp, A; Bambang Oetomo, Sidarto


    Objective: Surfactant nebulisation is a promising alternative to surfactant instillation in newborns with the respiratory distress syndrome. Although less surfactant is deposited in the lung, it improves gas exchange, probably due to a superior distribution. We hypothesize that a more uniform distri

  4. Biophysical inhibition of pulmonary surfactant function by polymeric nanoparticles: role of surfactant protein B and C. (United States)

    Beck-Broichsitter, Moritz; Ruppert, Clemens; Schmehl, Thomas; Günther, Andreas; Seeger, Werner


    The current study investigated the mechanisms involved in the process of biophysical inhibition of pulmonary surfactant by polymeric nanoparticles (NP). The minimal surface tension of diverse synthetic surfactants was monitored in the presence of bare and surface-decorated (i.e. poloxamer 407) sub-100 nm poly(lactide) NP. Moreover, the influence of NP on surfactant composition (i.e. surfactant protein (SP) content) was studied. Dose-elevations of SP advanced the biophysical activity of the tested surfactant preparation. Surfactant-associated protein C supplemented phospholipid mixtures (PLM-C) were shown to be more susceptible to biophysical inactivation by bare NP than phospholipid mixture supplemented with surfactant protein B (PLM-B) and PLM-B/C. Surfactant function was hindered owing to a drastic depletion of the SP content upon contact with bare NP. By contrast, surface-modified NP were capable of circumventing unwanted surfactant inhibition. Surfactant constitution influences the extent of biophysical inhibition by polymeric NP. Steric shielding of the NP surface minimizes unwanted NP-surfactant interactions, which represents an option for the development of surfactant-compatible nanomedicines.

  5. Surfactant nebulisation : lung function, surfactant distribution and pulmonary blood flow distribution in lung lavaged rabbits

    NARCIS (Netherlands)

    Dijk, Peter H.; Heikamp, A; Bambang Oetomo, Sidarto


    Objective: Surfactant nebulisation is a promising alternative to surfactant instillation in newborns with the respiratory distress syndrome. Although less surfactant is deposited in the lung, it improves gas exchange, probably due to a superior distribution. We hypothesize that a more uniform distri

  6. Protein denaturation due to the action of surfactants: a study by SAXS and ITC

    Energy Technology Data Exchange (ETDEWEB)

    Oseliero Filho, Pedro Leonidas; Oliveira, Cristiano Luis Pinto de [Universidade de Sao Paulo (USP), SP (Brazil); Pedersen, Jan Skov; Otzen, Daniel Erik [University of Aarhus (Denmark)


    Full text: Proteins are the major constituent of biological systems along with carbohydrates, lipids and nucleic acids (DNA and RNA). According to their structure and composition, proteins perform several functions in the organism, starting from the macroscopic level, with participation on the olfaction of animals, down to the cellular level, allocated in the membrane and making the connection between extra and intracellular environment. The function of a protein (which may be enzymatic, hormonal, structural, energetic, transport etc) is related to several factors including its structure (primary, secondary, tertiary or quaternary). Denaturation occurs when the secondary structure and/or tertiary is lost, which is almost always followed by the loss of the associated biological function. Temperature, pH and the action of surfactants influence the process of the denaturation. The influence of surfactants to the protein structure and function is the aim of this work. Therefore we are using an isolated protein, {alpha}-lactalbumin, that is found in the milk and whose function is related to the synthesis of galactose. The purpose is to characterize, in a thermodynamic-structural point of view, the denaturation of alpha-lactalbumin in the presence of surfactants anionic (sodium dodecyl sulfate - SDS), cationic (tetradecyltrimethylammonium bromide - TTAB), zwitterionic (2-diheptanoyl-sn-glycero-3- phosphocholine - DHPC) and nonionic (decyl-{beta}-D-Maltopyranoside - DM). The isothermal titration calorimetry (ITC) technique, which provides information of structural changes from changes in energy, represents the starting point for the study, while the technique of small angle X-ray scattering (SAXS) provides information about the structural characteristics of surfactant-protein complexes formed at each step of the denaturation process. The data analysis is in the initial stage, but it was possible to obtain general parameters related to the complex formed from the

  7. Hemolysis by surfactants--A review. (United States)

    Manaargadoo-Catin, Magalie; Ali-Cherif, Anaïs; Pougnas, Jean-Luc; Perrin, Catherine


    An overview of the use of surfactants for erythrocyte lysis and their cell membrane action mechanisms is given. Erythrocyte membrane characteristics and its association with the cell cytoskeleton are presented in order to complete understanding of the erythrocyte membrane distortion. Cell homeostasis disturbances caused by surfactants might induce changes starting from shape modification to cell lysis. Two main mechanisms are hypothesized in literature which are osmotic lysis and lysis by solubilization even if the boundary between them is not clearly defined. Another specific mechanism based on the formation of membrane pores is suggested in the particular case of saponins. The lytic potency of a surfactant is related to its affinity for the membrane and the modification of the lipid membrane curvature. This is to be related to the surfactant shape defined by its hydrophobic and hydrophilic moieties but also by experimental conditions. As a consequence, prediction of the hemolytic potency of a given surfactant is challenging. Several studies are focused on the relation between surfactant erythrolytic potency and their physico-chemical parameters such as the critical micellar concentration (CMC), the hydrophile-lipophile balance (HLB), the surfactant membrane/water partition coefficient (K) or the packing parameter (P). The CMC is one of the most important factors considered even if a lytic activity cut-off effect points out that the only consideration of CMC not enough predictive. The relation K.CMC must be considered in addition to the CMC to predict the surfactant lytic capacity within the same family of non ionic surfactant. Those surfactant structure/lytic activity studies demonstrate the requirement to take into account a combination of physico-chemical parameters to understand and foresee surfactant lytic potency.

  8. Fluorophotometric determination of critical micelle concentration (CMC) of ionic and non-ionic surfactants with carbon dots via Stokes shift. (United States)

    Lavkush Bhaisare, Mukesh; Pandey, Sunil; Shahnawaz Khan, M; Talib, Abou; Wu, Hui-Fen


    A new and facile method for the determination of critical micelle concentration (CMC) of ionic and non-ionic surfactants is proposed in this article. Carbon dots exhibited substantial fluorescence and therefore enhanced the sensitivity of this evaluation. Understanding the formation of surfactant micelles is vital for the applications of biomedicine such as drug fabrication and smart molecular vehicles in delivering therapeutic dosage to various molecular sites. The fluorescence property of carbon dots was utilized for the first time to estimate the critical micelle concentration of surfactants. The central concept of the approach is based on the Stokes shift determination of a system composed of constant amount of carbon dots with varying concentrations of ionic and non-ionic surfactants. The synthesized carbon dots were characterized by FTIR, TEM, XRD, Raman, UV, and fluorescence spectroscope. The carbon dots were excited at 280 nm so as to obtain maximum emission for the Stokes shift measurement. The CMC value of cetyltrimethyl ammonium bromide (CTAB), sodium dodecyl sulfate (SDS), Triton X-100, dodecyldimethyl(3-sulfopropyl)ammonium hydroxide (SB-12) evaluated by this approach was found to be 0.98, 7.3, 0.19, and 3.5mM, respectively. The signals of spectra were assigned and explained in terms of both electron transitions between specific molecular orbital and the interaction with solvent.

  9. Effect of surfactants on Ra-sHSPI - A small heat shock protein from the cattle tick Rhipicephalus annulatus (United States)

    Siddiqi, Mohammad Khursheed; Shahein, Yasser E.; Hussein, Nahla; Khan, Rizwan H.


    Electrostatic interaction plays an important role in protein aggregation phenomenon. In this study, we have checked the effect of anionic - Sodium Dodecyl Sulfate (SDS) and cationic-Cetyltrimethyl Ammonium Bromide (CTAB) surfactant on aggregation behavior of Ra-sHSPI, a small heat shock protein purified from Rhipicephalus annulatus tick. To monitor the effect of these surfactants, we have employed several spectroscopic methods such as Rayleigh light scattering measurements, ANS (8-Anilinonaphthalene-1-sulfonic acid) fluorescence measurements, ThT (Thioflavin T) binding assays, Far-UV CD (Circular Dichroism) and dynamic light scattering measurements. In the presence of anionic surfactant-SDS, Ra-sHSPI forms amyloid fibrils, in contrast, no amyloid formation was observed in presence of cationic surfactant at low pH. Enhancement of ANS fluorescence intensity confirms the exposition of more hydrophobic patches during aggregation. ThT binding assay confirms the amyloid fibrillar nature of the SDS induced Ra-sHSPI aggregates and supported by PASTA 2.0 (prediction of amyloid structural aggregation) software. This study demonstrates the crucial role of charge during amyloid fibril formation at low pH in Ra-sHSPI.

  10. Preparation and characterization of nanocrystalline CuO powders with the different surfactants and complexing agent mediated precipitation method

    Energy Technology Data Exchange (ETDEWEB)

    Rajendran, V.; Gajendiran, J., E-mail:


    Highlights: • CuO nanostructures by surfactants mediated method. • Structural and optical properties of CuO nanostructures changes under the effect of surface modifier. • Citric acid assisted is the best, in terms of size, morphology and optical properties than that of CTAB, SDS and PEG-400. - Abstract: Nanostructures of copper oxide (CuO) was synthesized into crystallite sized ranging from 20 to 50 nm in the presence of different surfactants, and complex agent such as cityl tri methyl ammonium bromide (CTAB), sodium do decyl sulfate (SDS), poly ethylene glycol (PEG-400) and citric acid via a precipitation route. Variations in several parameters and their effects on the structural and optical properties of CuO nanostructures (crystallite size, morphology and band gap) were investigated by XRD, FTIR, SEM and UV analysis. The UV–visible absorption spectra of the different surfactants and complexing agent assisted CuO nanostructures indicates that the estimated optical band gap energy value (1.94–1.98 eV) is higher than that of the bulk CuO value (1.4 eV), which is attributed to the quantum confinement effect. The formation mechanism of different surfactants and complexing agent assisted CuO nanostructures is also proposed.

  11. Een ionchromatografische methode voor de simultane bepaling van nitriet, bromide en sulfiet in water

    NARCIS (Netherlands)

    Beld WA van den; Cleven RFMJ; LAC


    Betreft resultaten van een onderzoek naar het ontwikkelen van een geautomatiseerde ionchromatografische methode voor de bepaling van nitriet, bromide en sulfiet. Het onderzoek heeft geresulteerd in een betrouwbare, selectieve en gevoelige methode voor de simultane bepaling van nitriet, bromide e

  12. Simulation of dynamic behavior of surfactants on a hydrophobic surface using periodic-shell boundary molecular dynamics. (United States)

    Minami, Daiki; Horikoshi, Satoshi; Sakai, Kenichi; Sakai, Hideki; Abe, Masahiko


    The adsorption and aggregation behaviors of sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB) on a hydrophobic graphite surface were examined using a novel molecular dynamics (MD) simulation with the periodic-shell boundary condition (PSBC). Differences in the adsorption behavior of SDS and CTAB molecules were clearly shown on the hydrophobic surface. Unexpectedly, the SDS molecules approached the graphite surface with their hydrophilic head groups. This unexpected approach mode was thought to be due to the aqueous layer on the graphite surface. The hydrophobic moiety of SDS molecules repeatedly adsorbed and desorbed on the graphite surface. In addition, SDS molecules kept moving on the graphite surface; thus, they did not form a stable adsorption layer. In contrast to SDS, the hydrophobic moiety of CTAB molecules approached the graphite surface at the primary step of adsorption. The hydrophobic moieties of CTAB molecules came close to each other, whereas the hydrophilic groups separated from one another. This result suggests that the CTAB molecules form molecular assemblies with a curved structure. The simulation results were consistent with the experimental observations. A clear difference between the adsorption behavior of SDS and CTAB molecules was revealed by MD simulations with PSBC.

  13. Removal of phosphate using iron oxide nanoparticles synthesized by eucalyptus leaf extract in the presence of CTAB surfactant. (United States)

    Cao, Dan; Jin, Xiaoying; Gan, Li; Wang, Ting; Chen, Zuliang


    This study investigated the use of cetyltrimethylammonium bromide (CTAB) as a stabilizer in green synthesis to improve the reactivity of iron oxide nanoparticles (IONP). Results show that efficiency in removing phosphate increased from 71.0% to 97.3%. To understand how to improve the reactivity of IONP by CTAB: firstly, characterizations of IONP before and after phosphate removal by SEM, EDS, FTIR, XPS show the adsorption of P onto the IONP; secondly, batch experiments indicate that the adsorption capacity of phosphate increased when temperature or initial phosphate concentration increased and decreased with an increase in both adsorbent dose and pH. Adsorption followed the pseudo-second-order kinetics model and the equilibrium data fitted well to the Langmuir isotherm. Thermodynamic data confirmed the spontaneous and endothermic nature of the adsorption process. Finally, it was proposed that the adsorption of phosphate using CTAB-modified IONP was mainly associated with inner-sphere complexing mechanism and electrostatic attraction. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. 77 FR 20752 - Methyl Bromide; Proposed Pesticide Tolerance (United States)


    ... necessary to prevent the introduction of a plant pest into the United States or the dissemination of a plant... partition into organic vs. aqueous environments, and is therefore commonly used to predict the likelihood...). See the February 22, 2002, Residue Chemistry Chapter for the methyl bromide RED available in...

  15. Direct acylation of aryl bromides with aldehydes by palladium catalysis. (United States)

    Ruan, Jiwu; Saidi, Ourida; Iggo, Jonathan A; Xiao, Jianliang


    A new protocol for the direct acylation of aryl bromides with aldehydes is established. It appears to involve palladium-amine cooperative catalysis, affording synthetically important alkyl aryl ketones in moderate to excellent yields in a straightforward manner, and broadening the scope of metal-catalyzed coupling reactions.

  16. On the existence of ‘L-alanine cadmium bromide' (United States)

    Srinivasan, Bikshandarkoil R.


    It is argued that the recently reported nonlinear optical crystal L-alanine cadmium bromide, grown by slow solvent evaporation method at room temperature [P. Ilayabarathi, J. Chandrasekaran, Spectrochim. Acta 96A (2012) 684-689] is the well-known L-alanine crystal. The isolation of L-alanine crystal is explained due to fractional crystallization.

  17. On the existence of 'L-alanine cadmium bromide'. (United States)

    Srinivasan, Bikshandarkoil R


    It is argued that the recently reported nonlinear optical crystal L-alanine cadmium bromide, grown by slow solvent evaporation method at room temperature [P. Ilayabarathi, J. Chandrasekaran, Spectrochim. Acta 96A (2012) 684-689] is the well-known L-alanine crystal. The isolation of L-alanine crystal is explained due to fractional crystallization.

  18. Preozonation of bromide-bearing source water in south China

    Institute of Scientific and Technical Information of China (English)


    The effectiveness of preozonation was evaluated on treating a bromide-bearing dam source water in south China through batch-scale experiments. Preozonation at ozone doses of 0.5-1.0 mg/L (at ozone consumption base) enhanced total organic carbon(TOC) removal through coagulation, and resulted in an almost linear reduction of ultraviolet absorbance at 254 nm (UV254). The removals of TOC (after coagulation) and UV254 at the ozone dose of 1.0 mg/L were 36% and 70%, respectively. Preozonation at an ozone dose between 0.5 and 1.0 mg/L resulted in the removal of disinfection byproducts formation potential (DBFP) including trihalomethane formation potential (THMFP) and haloacetic acid formation potential (HAAFP) for about 50%. The removals of THMFP and HAAFP decreased with the further increase of ozone dose. Ozonation of bromide-bearing water (bromide concentration,34 μg/L) produced a bromate concentration under the detection limit(2 μg/L) at ozone doses < 1.5 mg/L. However, bromate >10 μg/L could be produced when the bromide concentration was increased to 96 μg/L.

  19. Structured fluids polymers, colloids, surfactants

    CERN Document Server

    Witten, Thomas A


    Over the last thirty years, the study of liquids containing polymers, surfactants, or colloidal particles has developed from a loose assembly of facts into a coherent discipline with substantial predictive power. These liquids expand our conception of what condensed matter can do. Such structured-fluid phenomena dominate the physical environment within living cells. This book teaches how to think of these fluids from a unified point of view showing the far-reaching effects ofthermal fluctuations in producing forces and motions. Keeping mathematics to a minimum, the book seeks the simplest expl

  20. Innovation in surfactant therapy I: surfactant lavage and surfactant administration by fluid bolus using minimally invasive techniques. (United States)

    Dargaville, Peter A


    Innovation in the field of exogenous surfactant therapy continues more than two decades after the drug became commercially available. One such innovation, lung lavage using dilute surfactant, has been investigated in both laboratory and clinical settings as a treatment for meconium aspiration syndrome (MAS). Studies in animal models of MAS have affirmed that dilute surfactant lavage can remove meconium from the lung, with resultant improvement in lung function. In human infants both non-randomised studies and two randomised controlled trials have demonstrated a potential benefit of dilute surfactant lavage over standard care. The largest clinical trial, performed by our research group in infants with severe MAS, found that lung lavage using two 15-ml/kg aliquots of dilute surfactant did not reduce the duration of respiratory support, but did appear to reduce the composite outcome of death or need for extracorporeal membrane oxygenation. A further trial of lavage therapy is planned to more precisely define the effect on survival. Innovative approaches to surfactant therapy have also extended to the preterm infant, for whom the more widespread use of continuous positive airway pressure (CPAP) has meant delaying or avoiding administration of surfactant. In an effort to circumvent this problem, less invasive techniques of bolus surfactant therapy have been trialled, including instillation directly into the pharynx, via laryngeal mask and via brief tracheal catheterisation. In a recent clinical trial, instillation of surfactant into the trachea using a flexible feeding tube was found to reduce the need for subsequent intubation. We have developed an alternative method of brief tracheal catheterisation in which surfactant is delivered via a semi-rigid vascular catheter inserted through the vocal cords under direct vision. In studies to date, this technique has been relatively easy to perform, and resulted in rapid improvement in lung function and reduced need for

  1. Spectrophotometric Study of Ternary Complex Forming Systems of Some Lanthanide Metal Ions with Eriochrome Cyanine R in Presence of Cetylpyridinium Bromide for Microdetermination

    Directory of Open Access Journals (Sweden)

    A. S. Dhepe


    Full Text Available Study of coordination compounds of lanthanide elements has received a great attention due to growing applications in science and technology. Number of chromogenic reagents form water soluble colored complexes with lanthanides. Eriochrome cyanine R (ECR a member of triphenylmethane type of dye has been reported to form green colored complexes with lanthanides and has been used for microdetermination of these metal ions. Addition of cationic surfactant, Cetylpyridinium bromide (CPB, a cationic surfactant sensitizes the color reactions of Gd(III, Tb(III, Dy(III, Ho(III and Lu(III with ECR. Formation of water soluble, highly colored ternary complexes with a considerable bathochromic shift of about 50 nm in presence of surfactant has been observed. Optimum reaction conditions and other analytical parameters were also evaluated. Stoichiometric ratio 1:3:3 of Ln: ECR: CPB are responsible for the observed rise in molar absorptivity and sensitivity. Beer’s law was obeyed between 0.50 to 13.00 ppm. Effective photometric range and molar absorptivity of these ternary complexes have been calculated. Effect of some common interfering ions on determination of these lanthanide metal ions was studied. A simple, rapid and highly sensitive spectrophotometeric method has been proposed for the determination of metal ions understudy.

  2. T-type Ca(2+) channel modulation by otilonium bromide. (United States)

    Strege, Peter R; Sha, Lei; Beyder, Arthur; Bernard, Cheryl E; Perez-Reyes, Edward; Evangelista, Stefano; Gibbons, Simon J; Szurszewski, Joseph H; Farrugia, Gianrico


    Antispasmodics are used clinically to treat a variety of gastrointestinal disorders by inhibition of smooth muscle contraction. The main pathway for smooth muscle Ca(2+) entry is through L-type channels; however, there is increasing evidence that T-type Ca(2+) channels also play a role in regulating contractility. Otilonium bromide, an antispasmodic, has previously been shown to inhibit L-type Ca(2+) channels and colonic contractile activity. The objective of this study was to determine whether otilonium bromide also inhibits T-type Ca(2+) channels. Whole cell currents were recorded by patch-clamp technique from HEK293 cells transfected with cDNAs encoding the T-type Ca(2+) channels, Ca(V)3.1 (alpha1G), Ca(V)3.2 (alpha1H), or Ca(V)3.3 (alpha1I) alpha subunits. Extracellular solution was exchanged with otilonium bromide (10(-8) to 10(-5) M). Otilonium bromide reversibly blocked all T-type Ca(2+) channels with a significantly greater affinity for Ca(V)3.3 than Ca(V)3.1 or Ca(V)3.2. Additionally, the drug slowed inactivation in Ca(V)3.1 and Ca(V)3.3. Inhibition of T-type Ca(2+) channels may contribute to inhibition of contractility by otilonium bromide. This may represent a new mechanism of action for antispasmodics and may contribute to the observed increased clinical effectiveness of antispasmodics compared with selective L-type Ca(2+) channel blockers.

  3. T-type Ca2+ channel modulation by otilonium bromide (United States)

    Strege, Peter R.; Sha, Lei; Beyder, Arthur; Bernard, Cheryl E.; Perez-Reyes, Edward; Evangelista, Stefano; Gibbons, Simon J.; Szurszewski, Joseph H.


    Antispasmodics are used clinically to treat a variety of gastrointestinal disorders by inhibition of smooth muscle contraction. The main pathway for smooth muscle Ca2+ entry is through L-type channels; however, there is increasing evidence that T-type Ca2+ channels also play a role in regulating contractility. Otilonium bromide, an antispasmodic, has previously been shown to inhibit L-type Ca2+ channels and colonic contractile activity. The objective of this study was to determine whether otilonium bromide also inhibits T-type Ca2+ channels. Whole cell currents were recorded by patch-clamp technique from HEK293 cells transfected with cDNAs encoding the T-type Ca2+ channels, CaV3.1 (α1G), CaV3.2 (α1H), or CaV3.3 (α1I) alpha subunits. Extracellular solution was exchanged with otilonium bromide (10−8 to 10−5 M). Otilonium bromide reversibly blocked all T-type Ca2+ channels with a significantly greater affinity for CaV3.3 than CaV3.1 or CaV3.2. Additionally, the drug slowed inactivation in CaV3.1 and CaV3.3. Inhibition of T-type Ca2+ channels may contribute to inhibition of contractility by otilonium bromide. This may represent a new mechanism of action for antispasmodics and may contribute to the observed increased clinical effectiveness of antispasmodics compared with selective L-type Ca2+ channel blockers. PMID:20203058

  4. Surfactant Adsorption: A Revised Physical Chemistry Lab (United States)

    Bresler, Marc R.; Hagen, John P.


    Many physical chemistry lab courses include an experiment in which students measure surface tension as a function of surfactant concentration. In the traditional experiment, the data are fit to the Gibbs isotherm to determine the molar area for the surfactant, and the critical micelle concentration is used to calculate the Gibbs energy of micelle…

  5. Surfactant effects on soil aggregate tensile strength (United States)

    Little is known regarding a soil aggregate's tensile strength response to surfactants that may be applied to alleviate soil water repellency. Two laboratory investigations were performed to determine surfactant effects on the tensile strength of 1) Ap horizons of nine wettable, agricultural soils co...

  6. Silver-catalyzed cross-coupling reactions of alkyl bromides with alkyl or aryl Grignard reagents


    Someya, Hidenori; Yorimitsu, Hideki; Oshima, Koichiro


    reatment of secondary or tertiary alkyl bromides with alkyl Grignard reagents in the presence of catalytic amounts of silver bromide and potassium fluoride in CH2Cl2 afforded the corresponding cross-coupling products in reasonable yields. Moreover, silver showed catalytic activity for the cross-coupling reactions of alkyl bromides with aryl Grignard reagents.

  7. Association of defects in lead chloride and lead bromide: Ionic conductivity and dielectric loss measurements

    NARCIS (Netherlands)

    Brom, W.E. van den; Schoonman, J.; Wit, J.H.W. de

    The ionic conductivity data of pure and doped lead bromide without associated defects are used in order to explain the anomalous conductivity behaviour of copper (I) bromide and lead oxide-doped lead-bromide crystals. In these crystals precipitated dopant and associated defects are present. The

  8. 40 CFR 180.519 - Bromide ion and residual bromine; tolerances for residues. (United States)


    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Bromide ion and residual bromine... Tolerances § 180.519 Bromide ion and residual bromine; tolerances for residues. (a) General. The food additives, bromide ion and residual bromine, may be present in water, potable in accordance with...

  9. Association of defects in lead chloride and lead bromide: Ionic conductivity and dielectric loss measurements

    NARCIS (Netherlands)

    Brom, W.E. van den; Schoonman, J.; Wit, J.H.W. de


    The ionic conductivity data of pure and doped lead bromide without associated defects are used in order to explain the anomalous conductivity behaviour of copper (I) bromide and lead oxide-doped lead-bromide crystals. In these crystals precipitated dopant and associated defects are present. The asso

  10. Metathesis depolymerization for removable surfactant templates.

    Energy Technology Data Exchange (ETDEWEB)

    Zifer, Thomas (Sandia National Laboratories, Livermore, CA); Wheeler, David Roger; Rahimian, Kamayar; McElhanon, James Ross (Sandia National Laboratories, Livermore, CA); Long, Timothy Michael; Jamison, Gregory Marks; Loy, Douglas Anson (Los Alamos National Laboratories, Los Alamos, NM); Kline, Steven R. (National Institute of Standards and Technology, Gaithersburg, MD); Simmons, Blake Alexander (Sandia National Laboratories, Livermore, CA)


    Current methodologies for the production of meso- and nanoporous materials include the use of a surfactant to produce a self-assembled template around which the material is formed. However, post-production surfactant removal often requires centrifugation, calcination, and/or solvent washing which can damage the initially formed material architecture(s). Surfactants that can be disassembled into easily removable fragments following material preparation would minimize processing damage to the material structure, facilitating formation of templated hybrid architectures. Herein, we describe the design and synthesis of novel cationic and anionic surfactants with regularly spaced unsaturation in their hydrophobic hydrocarbon tails and the first application of ring closing metathesis depolymerization to surfactant degradation resulting in the mild, facile decomposition of these new compounds to produce relatively volatile nonsurface active remnants.

  11. Enhanced Oil Recovery with Surfactant Flooding

    DEFF Research Database (Denmark)

    Sandersen, Sara Bülow

    Enhanced oil recovery (EOR) is being increasingly applied in the oil industry and several different technologies have emerged during, the last decades in order to optimize oil recovery after conventional recovery methods have been applied. Surfactant flooding is an EOR technique in which the phase...... both for complex surfactant systems as well as for oil and brine systems. It is widely accepted that an increase in oil recovery can be obtained through flooding, whether it is simple waterflooding, waterflooding where the salinity has been modified by the addition or removal of specific ions (socalled...... “smart” waterflooding) or surfactant flooding. High pressure experiments have been carried out in this work on a surfactant system (surfactant/ oil/ brine) and on oil/ seawater systems (oil/ brine). The high pressure experiments were carried out on a DBR JEFRI PVT cell, where a glass window allows...

  12. Hexafluoroisopropanol-induced catanionic-surfactants-based coacervate extraction for analysis of lysozyme. (United States)

    Xu, Jia; Niu, Manli; Xiao, Yuxiu


    A coacervate extraction method, based on hexafluoroisopropanol (HFIP)-induced catanionic surfactants and coupled with a back-extraction procedure, was developed for separation and purification of proteins, using sodium dodecyl sulfate (SDS) and dodecyltrimethyl ammonium bromide (DTAB) as representative catanionic surfactants and lysozyme as a model protein. After the coacervate extraction and back extraction, the obtained lysozyme solutions were examined in terms of quantitative analysis by capillary electrophoresis, bacteriolytic activity, and circular dichroism (CD). The effects of several parameters including back-extraction solvent, HFIP content, total surfactant concentration, and SDS/DTAB molar ratio were investigated in detail on the extraction efficiency and activity of lysozyme. Under the optimized extraction conditions (66 mM KH2PO4 buffer with pH 6.2 as back-extraction solvent, SDS/DTAB molar ratio = 1:1 mol/mol, total surfactant concentration = 30 mM, HIFP concentration = 8 % v/v), the extraction recovery was 89.8 % (±4.7, n = 3), limit of detection was 2.2 (±0.3, n = 3) μg mL(-1), and meanwhile nearly 65 % of native lysozyme activity was retained. In addition, the activity and CD assays showed that SDS/DTAB molar ratio had a significant influence on the activity and structure of lysozyme after extraction. The DTAB-rich extraction systems, in which the DTAB mole fraction was equal to or larger than 70 %, could keep the activity and structure of lysozyme almost in the native state. Graphical Abstract Procedure of HFIP-induced SDS/DTAB coacervate extraction and back extraction of lysozyme.

  13. Surfactant-directed synthesis of silver nanorods and characteristic spectral changes occurred by their morphology evolution (United States)

    Zhang, Wen; Hu, Guansong; Zhang, Wanzhong; Qiao, Xueliang; Wu, Kai; Chen, Qingyuan; Cai, Yuchun


    Silver nanorods with different polydispersity were synthesized in the cetyltrimethylammonium bromide (CTAB) rod-shaped micelles by inducing the orientation growth of silver seeds and adjusting the volumes of CTAB. The reaction for the formation of silver nanorods had basically finished in 10 min. A suitable volume of CTAB (i.e., 15.0 mL of 0.1 M CTAB) is beneficial to obtain high-quality silver nanorods in the given reaction system. That is, the volume of added CTAB is a key factor to determine the polydispersity of the formed nanorods. The aging time plays a critical role in the morphology evolution of silver nanorods due to the oxidation of silver nanorods with Br-, O2 and the Ostwald ripening of the nanoparticles. As a result, the characteristic spectral changes occurred due to the morphology evolution of silver nanorods. The ablation in the top ends of the longer nanorods is often accompanied by the growth of some shorter nanorods and nanospheres. The size distribution of silver nanorods might be more uniform in the early aging stage. All the nanorods in the colloidal solution should turn into the near-spherical nanoparticles with larger sizes and thus the characteristic absorption should change to single peak centered at about 400 nm. Based on the research results, mathematical models are proposed for explaining the formation and morphology changes of silver nanorods. The morphology evolution of silver nanorods may be important and can be used as a reference for preparing silver nanorods, nanowires and other anisotropic nanomaterials.

  14. Enhanced Adsorption of Orange II Using Cationic Surfactant Modified Biochar Pyrolyzed from Cornstalk

    Directory of Open Access Journals (Sweden)

    Xiao Mi


    Full Text Available As dissolution of raw biomass is serious when used as an adsorbent, the cheap biochar pyrolyzed from biomass might be a good matrix. Raw cornstalk biochar was intentionally modified by cetyltrimethylammonium bromide (CTAB to prepare the composite adsorbent designed for the removal of negatively charged pollutants. After modification, the removal efficiency for anionic dye Orange II (ORII increased from 46.9% of the virgin cornstalk biochar to 99.7% of the CTAB-modified cornstalk biochar. The uptake of ORII proved to be favorable under acidic conditions but unfavorable under alkaline conditions. By nonlinear simulation, the Elovich model was the best to describe the adsorption kinetics. For linear simulation of the kinetic data, the pseudo-second-order kinetic model fitted the experimental points better than the pseudo-first-order model. Kinetic analysis indicated that the ORII adsorption process on the CTAB-modified cornstalk biochar might be chemical adsorption accompanied by ion exchange. At 298 K, the maximal adsorption capacity of the modified biochar is 26.9 mg/g by the Langmuir model. The adsorption of ORII increased with a rise in the reaction temperature. The enthalpy and entropy of the adsorption process are calculated to be 38.45 KJ mol−1 and 185.0 J mol−1 K−1, respectively. The negative values of ΔG0 at 288, 298, and 308 K were −14.92, −16.50, and −18.62 KJ mol−1, respectively. The above thermodynamic analysis demonstrates that the adsorption process was endothermic and spontaneous.

  15. Fibrinogen stability under surfactant interaction. (United States)

    Hassan, Natalia; Barbosa, Leandro R S; Itri, Rosangela; Ruso, Juan M


    Differential scanning calorimetry (DSC), circular dichroism (CD), difference spectroscopy (UV-vis), Raman spectroscopy, and small-angle X-ray scattering (SAXS) measurements have been performed in the present work to provide a quantitatively comprehensive physicochemical description of the complexation between bovine fibrinogen and the sodium perfluorooctanoate, sodium octanoate, and sodium dodecanoate in glycine buffer (pH 8.5). It has been found that sodium octanoate and dodecanoate act as fibrinogen destabilizer. Meanwhile, sodium perfluorooctanoate acts as a structure stabilizer at low molar concentration and as a destabilizer at high molar concentration. Fibrinogen's secondary structure is affected by all three studied surfactants (decrease in α-helix and an increase in β-sheet content) to a different extent. DSC and UV-vis revealed the existence of intermediate states in the thermal unfolding process of fibrinogen. In addition, SAXS data analysis showed that pure fibrinogen adopts a paired-dimer structure in solution. Such a structure is unaltered by sodium octanoate and perfluoroctanoate. However, interaction of sodium dodecanoate with the fibrinogen affects the protein conformation leading to a complex formation. Taken together, all results evidence that both surfactant hydrophobicity and tail length mediate the fibrinogen stability upon interaction. Copyright © 2011 Elsevier Inc. All rights reserved.

  16. Uptake of ozone to mixed sodium bromide/ citric acid solutions (United States)

    Lee, Ming-Tao; Steimle, Emilie; Bartels-Rausch, Thorsten; Kato, Shunsuke; Lampimäki, Markus; Brown, Matthew; van Bokhoven, Jeroen; Nolting, Frithjof; Kleibert, Armin; Türler, Andreas; Ammann, Markus


    Sea-salt solution - air interfaces play an important role in the chemistry of the marine boundary layer. The reaction of ozone (O3) with bromide is of interest in the context of formation of photolabile halogens (Br2, BrCl) in the marine boundary layer. Recent experiments have suggested that the bromide oxidation rate is related to the surface concentration of bromide [1] and inversely related to the gas phase concentration of O3, an indication for a precursor mediated reaction at the surface [2]. So far, the effect of organics (such as those occurring at the ocean surface or in marine aerosols) on the reaction of O3 with bromide aerosols has not been studied yet. In our study we investigate the uptake kinetics of O3 to a mixed solution of sodium bromide (NaBr) and citric acid (CA), which represents highly oxidized organic compounds present in the environment, with a well-established coated wall flow tube technique, which leads to exposure of the film to O3 allowing the heterogeneous reactions to take place and the loss of O3 being measured. The results indicate that the uptake of O3 to the films with the higher bromide concentrations (0.34M and 4M) is independent of the gas phase concentration and roughly consistent with uptake limited by reaction in the bulk. For the lower bromide concentration (84mM), however, we observe a trend of the uptake coefficient to decrease with increasing O3 concentration, indicating an increasing importance of a surface reaction. In an attempt to constrain the kinetic data, we employed X-ray photoelectron spectroscopy (XPS) to get insight into the surface composition of the aqueous solution - air interface. Previous XPS studies have shown that halide ion concentrations are enhanced at the aqueous solution air interface [3-4], which likely promotes the surface reactions of bromide or iodide with O3. A first XPS study of ternary solutions of KI with butanol indicated the importance of specific interactions of the cation with the alcohol

  17. Low-Temperature Reverse Microemulsion Synthesis, Characterization, and Photocatalytic Performance of Nanocrystalline Titanium Dioxide


    Zhang Liu; Zicong Jian; Jianzhang Fang; Xiaoxin Xu; Ximiao Zhu; Shuxing Wu


    Nanocrystalline titanium dioxide ( T i O 2 ) was synthesized in microemulsions by using cetyltrimethylammonium bromide (CTAB) as surfactant. In order to investigate the crystal transformation and photoactivity at low temperature, the as-prepared precipitates were aged at 65°C or calcined at various temperatures. Analyses using powder X-ray diffraction (XRD) and Fourier transform infrared microscopy (FT-IR) showed that precursors without aging or calcination were noncrystal and adsorbed by sur...

  18. Pengaruh Penambahan Bentonit Termodifikasi Sebagai Pengisi Terhadap Sifat Mekanik dan Penyerapan Air Pada Komposit Poliester Tak Jenuh




    Research about the usage of modified bentonite as filler in unsaturated polyester resin has been done to evaluate the best composition of modified bentonite as filler on the mechanical properties of polyester composites. The bentonites used were modified with Cetyltrimethylammonium Bromide (CTAB) surfactant with various concentrations by 0,05, 0,1, and 0,15M and Titanium Dioxide (TiO2). In this research, unsaturated polyester resin was mixed with modified bentonite with the ...

  19. Electrorheological Properties of Suspensions of Polypyrrole Ribbon Particles in Silicone Oil


    Almajdalawi, Shawqi; Pavlínek, Vladimír; Cheng, Qilin; Sáha, Petr; Mrlík, Miroslav; Stěnička, Martin


    A new polypyrrole (PPy) ribbon particles structure has been synthesized by solution chemistry method (oxidative polymerization) in the presence of surfactant cetyltrimethylammonium bromide (CTAB) with oxidizing agent ammonium persulfate (APS). The resulted polymer was treated with ammonium hydroxide (NH4OH) several times to obtain different sample conductivity. PPy morphology was characterized by SEM. The suspensions were prepared by dispersing PPy with different conductivities in silicone oi...

  20. Surfactant replacement therapy--economic impact. (United States)

    Pejaver, R K; al Hifzi, I; Aldussari, S


    Surfactant replacement is an effective treatment for neonatal respiratory distress syndrome. (RDS). As widespread use of surfactant is becoming a reality, it is important to assess the economic implications of this new form of therapy. A comparison study was carried out at the Neonatal Intensive Care Unit (NICU) of Northwest Armed Forces Hospital, Saudi Arabia. Among 75 infants who received surfactant for RDS and similar number who were managed during time period just before the surfactant was available, but by set criteria would have made them eligible for surfactant. All other management modalities except surfactant were the same for all these babies. Based on the intensity of monitoring and nursing care required by the baby, the level of care was divided as: Level IIIA, IIIB, Level II, Level I. The cost per day per bed for each level was calculated, taking into account the use of hospital immovable equipment, personal salaries of nursing, medical, ancillary staff, overheads and maintenance, depreciation and replacement costs. Medications used, procedures done, TPN, oxygen, were all added to individual patient's total expenditure. 75 infants in the Surfactant group had 62 survivors. They spent a total of 4300 days in hospital. (av 69.35) Out of which 970 d (av 15.65 per patient) were ventilated days. There were 56 survivors in the non-surfactant group of 75. They had spent a total of 5023 days in the hospital (av 89.69/patient) out of which 1490 were ventilated days (av 26.60 d). Including the cost of surfactant (two doses), cost of hospital stay for each infant taking the average figures of stay would be SR 118, 009.75 per surfactant treated baby and SR 164, 070.70 per non-surfactant treated baby. The difference of 46,061 SR is 39.03% more in non-surfactant group. One Saudi rial = 8 Rs (approx at the time study was carried out.) Medical care cost varies from place to place. However, it is definitely cost-effective where surfactant is concerned. Quality adjusted

  1. Surfactant-soil interactions during surfactant-amended remediation of contaminated soils by hydrophobic organic compounds: a review. (United States)

    Laha, Shonali; Tansel, Berrin; Ussawarujikulchai, Achara


    Surfactants are amphiphilic molecules that reduce aqueous surface tension and increase the solubility of hydrophobic organic compounds (HOCs). Surfactant-amended remediation of HOC-contaminated soils and aquifers has received significant attention as an effective treatment strategy - similar in concept to using soaps and detergents as washing agents to remove grease from soiled fabrics. The proposed mechanisms involved in surfactant-amended remediation include: lowering of interfacial tension, surfactant solubilization of HOCs, and the phase transfer of HOC from soil-sorbed to pseudo-aqueous phase. However, as with any proposed chemical countermeasures, there is a concern regarding the fate of the added surfactant. This review summarizes the current state of knowledge regarding nonionic micelle-forming surfactant sorption onto soil, and serves as an introduction to research on that topic. Surfactant sorption onto soil appears to increase with increasing surfactant concentration until the onset of micellization. Sorbed-phase surfactant may account for the majority of added surfactant in surfactant-amended remediation applications, and this may result in increased HOC partitioning onto soil until HOC solubilization by micellar phase surfactant successfully competes with increased HOC sorption on surfactant-modified soil. This review provides discussion of equilibrium partitioning theory to account for the distribution of HOCs between soil, aqueous phase, sorbed surfactant, and micellar surfactant phases, as well as recently developed models for surfactant sorption onto soil. HOC partitioning is characterized by apparent soil-water distribution coefficients in the presence of surfactant.

  2. Different effects of surfactant proteins B and C - implications for development of synthetic surfactants. (United States)

    Curstedt, Tore; Johansson, Jan


    Treatment of premature newborn rabbits with synthetic surfactants containing a surfactant protein C analogue in a simple phospholipid mixture gives similar tidal volumes as treatment with poractant alfa (Curosurf(R)) but ventilation with a positive end-expiratory pressure (PEEP) is needed for this synthetic surfactant to stabilize the alveoli at end-expiration. The effect on lung gas volumes seems to depend on the structure of the peptide since treatment with a synthetic surfactant containing the 21-residue peptide (LysLeu(4))(4)Lys (KL(4)) gives low lung gas volumes in experiments also performed with PEEP. Surfactant preparations containing both surfactant proteins B and C or their analogues prevent alveolar collapse at end-expiration even if ventilated without PEEP. Treatment of premature newborn rabbits with different natural surfactants indicates that both the lipid composition and the proteins are important in order to stabilize the alveoli at end-expiration. Synthetic surfactants containing two peptides may be able to replace natural surfactants within the near future but more trials need to be performed before any conclusion can be drawn about the ideal composition of this new generation of synthetic surfactants.

  3. Exogenous Pulmonary Surfactant as a Vehicle for Antimicrobials: Assessment of Surfactant-Antibacterial Interactions In Vitro

    Directory of Open Access Journals (Sweden)

    Alexei Birkun


    Full Text Available Owing to its unique surface-active properties, an exogenous pulmonary surfactant may become a promising drug delivery agent, in particular, acting as a vehicle for antibiotics in topical treatment of pneumonia. The purpose of this study was to assess a mutual influence of natural surfactant preparation and three antibiotics (amikacin, cefepime, and colistimethate sodium in vitro and to identify appropriate combination(s for subsequent in vivo investigations of experimental surfactant/antibiotic mixtures. Influence of antibiotics on surface-active properties of exogenous surfactant was assessed using the modified Pattle method. Effects of exogenous surfactant on antibacterial activity of antimicrobials against Staphylococcus aureus, Klebsiella pneumoniae, and Pseudomonas aeruginosa were evaluated using conventional microbiologic procedures. Addition of amikacin or cefepime to surfactant had no significant influence on surface-active properties of the latter. Obvious reduction of surface-active properties was confirmed for surfactant/colistimethate composition. When suspended with antibiotics, surfactant either had no impact on their antimicrobial activity (amikacin or exerted mild to moderate influence (reduction of cefepime bactericidal activity and increase of colistimethate bacteriostatic activity against S. aureus and P. aeruginosa. Considering favorable compatibility profile, the surfactant/amikacin combination is advisable for subsequent investigation of joint surfactant/antibacterial therapy in animals with bacterial pneumonia.

  4. Synthesis and Crystal Structures of Azolo[b]1,3,4-Thiadiazinium Bromides

    Directory of Open Access Journals (Sweden)

    Gerhard Laus


    Full Text Available Three azolo[b]1,3,4-thiadiazinium bromides were prepared from the respective N-amino-N'-methylazolethiones and phenacyl bromide, and their crystal structures were determined. 6-Phenyl-1-methylimidazo[2,1-b]1,3,4-thiadiazinium bromide (1 crystallized as methanol solvate (P21/n, 6-phenyl-1-methyl-1,2,4-triazolo[3,4-b]1,3,4-thiadiazinium bromide (2 as hemi-ethanol solvate (P21/n, and 6-phenyl-1-methyl-1,2,4-triazolo[3,2-b]1,3,4-thiadiazinium bromide (3 solvent-free (P21/c. Interionic contacts were identified.

  5. Fluorescence emission of pyrene in surfactant solutions. (United States)

    Piñeiro, Lucas; Novo, Mercedes; Al-Soufi, Wajih


    The systematic description of the complex photophysical behaviour of pyrene in surfactant solutions in combination with a quantitative model for the surfactant concentrations reproduces with high accuracy the steady-state and the time resolved fluorescence intensity of pyrene in surfactant solutions near the cmc, both in the monomer and in the excimer emission bands. We present concise model equations that can be used for the analysis of the pyrene fluorescence intensity in order to estimate fundamental parameters of the pyrene-surfactant system, such as the binding equilibrium constant K of pyrene to a given surfactant micelle, the rate constant of excimer formation in micelles, and the equilibrium constant of pyrene-surfactant quenching. The values of the binding equilibrium constant K(TX100)=3300·10³ M⁻¹ and K(SDS)=190·10³ M⁻¹ for Triton X-100 (TX100) and SDS micelles, respectively, show that the partition of pyrene between bulk water and micelles cannot be ignored, even at relatively high surfactant concentrations above the cmc. We apply the model to the determination of the cmc from the pyrene fluorescence intensity, especially from the intensity ratio at two vibronic bands in the monomer emission or from the ratio of excimer to monomer emission intensity. We relate the finite width of the transition region below and above the cmc with the observed changes in the pyrene fluorescence in this region.

  6. Tunable, antibacterial activity of silicone polyether surfactants. (United States)

    Khan, Madiha F; Zepeda-Velazquez, Laura; Brook, Michael A


    Silicone surfactants are used in a variety of applications, however, limited data is available on the relationship between surfactant structure and biological activity. A series of seven nonionic, silicone polyether surfactants with known structures was tested for in vitro antibacterial activity against Escherichia coli BL21. The compounds varied in their hydrophobic head, comprised of branched silicone structures with 3-10 siloxane linkages and, in two cases, phenyl substitution, and hydrophilic tail of 8-44 poly(ethylene glycol) units. The surfactants were tested at three concentrations: below, at, and above their Critical Micelle Concentrations (CMC) against 5 concentrations of E. coli BL21 in a three-step assay comprised of a 14-24h turbidometric screen, a live-dead stain and viable colony counts. The bacterial concentration had little effect on antibacterial activity. For most of the surfactants, antibacterial activity was higher at concentrations above the CMC. Surfactants with smaller silicone head groups had as much as 4 times the bioactivity of surfactants with larger groups, with the smallest hydrophobe exhibiting potency equivalent to sodium dodecyl sulfate (SDS). Smaller PEG chains were similarly associated with higher potency. These data link lower micelle stability and enhanced permeability of smaller silicone head groups to antibacterial activity. The results demonstrate that simple manipulation of nonionic silicone polyether structure leads to significant changes in antibacterial activity.

  7. A study of surfactant-assisted waterflooding

    Energy Technology Data Exchange (ETDEWEB)

    Scamehorn, J F; Harwell, J H


    In surfactant-assisted waterflooding, a surfactant slug is injected into a reservoir, followed by a brine spacer, followed by second surfactant slug. The charge on the surfactant in the first slug has opposite sign to that in the second slug. When the two slugs mix in the reservoir, a precipitate or coacervate is formed which plugs the permeable region of the reservoir. Subsequently injected water or brine is forced through the low permeability region of the reservoir, increasing sweep efficiency of the waterflood, compared to a waterflood not using surfactants. In this part of the work, two major tasks are performed. First, core floods are performed with oil present to demonstrate the improvement in incremental oil production, as well as permeability modification. Second, a reservoir simulation model will be proposed to further delineate the optimum strategy for implementation of the surfactant-assisted waterflooding, as well as indicate the reservoir types for which it would be most effective. Surfactants utilized were sodium dodecyl sulfate and dodecyl pyridinium chloride. 44 refs., 17 figs., 3 tabs.

  8. Surfactants tailored by the class Actinobacteria

    Directory of Open Access Journals (Sweden)

    Johannes H Kügler


    Full Text Available Gloablly, the drive towards the establishment of a bio-based economy has resulted in an increased need for bio-based applications. This, in turn, has served as a driving force for the discovery and application of novel biosurfactants. The class Actinobacteria represents a vast group of microorganisms with the ability to produce a diverse range of secondary metabolites, including surfactants. Understanding the extensive nature of the biosurfactants produced by actinobacterial strains can assist in finding novel biosurfactants with new potential applications. This review therefore presents a comprehensive overview of the knowledge available on actinobacterial surfactants, the chemical structures that have been completely or partly elucidated, as well as the identity of the biosurfactant-producing strains. Producer strains of not yet elucidated compounds are discussed, as well as the original habitats of all the producer strains, which seems to indicate that biosurfactant production is environmentally driven. Methodology applied in the isolation, purification and structural elucidation of the different types of surface active compounds, as well as surfactant activity tests, are also discussed. Overall, actinobacterial surfactants can be summarized to include the dominantly occurring trehalose-comprising surfactants, other non-trehalose containing glycolipids, lipopeptides and the more rare actinobacterial surfactants. The lack of structural information on a large proportion of actinobacterial surfactants should be considered as a driving force to further explore the abundance and diversity of these compounds. This would allow for a better understanding of actinobacterial surface active compounds and their potential for biotechnological application.

  9. QDs Supported on Langmuir-Blodgett Films of Polymers and Gemini Surfactant

    Directory of Open Access Journals (Sweden)

    T. Alejo


    Full Text Available Different LB films of poly(octadecene-co-maleic anhydride, PMAO, poly(styrene-co-maleic anhydride partial 2 butoxy ethyl ester cumene terminated, PS-MA-BEE, and Gemini surfactant ethyl-bis(dimethyl octadecylammonium bromide, 18-2-18, have been used to study the effect of the substrate coating on the surface self-assembly of CdSe quantum dots (QDs. Results show that all the “coating molecules” avoid the 3D aggregation of QDs observed when these nanoparticles are directly deposited on mica. Different morphologies were observed depending on the molecules used as coatings, and this was related to the surface properties, such as wetting ability, and the morphology of the coating LB films.

  10. Large-scale, low-cost synthesis of monodispersed gold nanorods using a gemini surfactant (United States)

    Xu, Yong; Zhao, Yang; Chen, Lei; Wang, Xuchun; Sun, Jianxia; Wu, Haihua; Bao, Feng; Fan, Jian; Zhang, Qiao


    In this work, we demonstrate that monodispersed gold nanorods (AuNRs) can be obtained in a large-scale and cost-effective way. By using an industrial grade gemini surfactant (P16-8-16), the cost of the synthesis of high-quality AuNRs can be significantly reduced by 90%. The synthesis can be scaled up to over 4 L. The aspect ratio of AuNRs can be well tuned from ~2.4 to ~6.3, resulting in a wide tunability of the SPR properties. Systematic studies reveal that P16-8-16 could have a dual function: it can not only act as a capping ligand to stabilize AuNRs but also it can pre-reduce Au3+ to Au+ by the unsaturated C&z.dbd;C bond. Furthermore, the shape of AuNRs can be tailored from straight nanorods to ``dog-bones'' by simply varying the concentration of the surfactant. A mechanistic study shows that the shape change can be attributed to the presence of excess bromide ions because of the complex effect between bromide ions and gold ions. This work will not only help to achieve the industrial production of AuNRs, but also promote research into practical applications of various nanomaterials.In this work, we demonstrate that monodispersed gold nanorods (AuNRs) can be obtained in a large-scale and cost-effective way. By using an industrial grade gemini surfactant (P16-8-16), the cost of the synthesis of high-quality AuNRs can be significantly reduced by 90%. The synthesis can be scaled up to over 4 L. The aspect ratio of AuNRs can be well tuned from ~2.4 to ~6.3, resulting in a wide tunability of the SPR properties. Systematic studies reveal that P16-8-16 could have a dual function: it can not only act as a capping ligand to stabilize AuNRs but also it can pre-reduce Au3+ to Au+ by the unsaturated C&z.dbd;C bond. Furthermore, the shape of AuNRs can be tailored from straight nanorods to ``dog-bones'' by simply varying the concentration of the surfactant. A mechanistic study shows that the shape change can be attributed to the presence of excess bromide ions because of the

  11. Comparison of Heat and Bromide as Ground Water Tracers Near Streams (United States)

    Constantz, J.; Cox, M.H.; Su, G.W.


    Heat and bromide were compared as tracers for examining stream/ground water exchanges along the middle reaches of the Santa Clara River, California, during a 10-hour surface water sodium bromide injection test. Three cross sections that comprise six shallow (sodium bromide injection test. Vertical, one-dimensional simulations of bromide concentrations in the sediments yielded a good match to the observed bromide concentrations, without adjustment of any model parameters except solute dispersivities. This indicates that, for the spatial and temporal scales examined on the Santa Clara River, the use of heat and bromide as tracers provide comparable information with respect to apparent hydraulic conductivities and fluxes for sediments near streams. In other settings, caution should be used due to differences in the nature of conservative (bromide) versus nonconservative (heat) tracers, particularly when preferential flowpaths are present.

  12. Viscosity and density of some lower alkyl chlorides and bromides

    Energy Technology Data Exchange (ETDEWEB)

    Rutherford, W.M.


    A high-pressure capillary viscometer, used previously to measure the viscosity of methyl chloride was rebuilt to eliminate the first-order dependence of the measured viscosity on the value assumed for the density of the fluid being investigated. At the same time, the system was arranged so that part of the apparatus could be used to measure density by a volumetric displacement technique. Viscosity and density were measured for ethyl chloride, 1-chloropropane, 1-chlorobutane, methyl bromide, ethyl bromide, and 1-bromopropane. The temperature and pressure ranges of the experiments were 20-150 /sup 0/C and 0.27-6.99 MPa, respectively. The accuracy of the viscosity measurements was estimated to be +-1% and of the density measurements, +-0.2%.

  13. Study of ferroelectric characteristics of diisopropylammonium bromide films (United States)

    Thirmal, C.; Biswas, P. P.; Shin, Y. J.; Noh, T. W.; Giridharan, N. V.; Venimadhav, A.; Murugavel, P.


    Organic molecular ferroelectrics are highly desirable due to their numerous advantages. In the present work, a thick film of diisopropylammonium bromide organic molecular ferroelectric is fabricated on the ITO/glass substrate. The grown film shows preferential orientation along the c-axis with a ferroelectric transition at 419 K. The piezoresponse force microscopic measurements are done in a dual ac resonance tracking mode for its switching characteristics. The amplitude and phase images of the oppositely written domain patterns exhibit a clear contrast with 180° phase difference. The dynamical spectroscopic studies reveal a butterfly loop in amplitude and hysteretic character of the phase which are the expected characteristics features of ferroelectrics. In addition, the macroscopic polarization versus electric field hysteresis gives an additional proof for ferroelectric character of the film with the maximum polarization of 3.5 μC/cm2. Overall, we have successfully fabricated diisopropylammonium bromide organic films and demonstrated its room temperature ferroelectric characteristics.

  14. A novel and robust conditioning lesion induced by ethidium bromide. (United States)

    Hollis, Edmund R; Ishiko, Nao; Tolentino, Kristine; Doherty, Ernest; Rodriguez, Maria J; Calcutt, Nigel A; Zou, Yimin


    Molecular and cellular mechanisms underlying the peripheral conditioning lesion remain unsolved. We show here that injection of a chemical demyelinating agent, ethidium bromide, into the sciatic nerve induces a similar set of regeneration-associated genes and promotes a 2.7-fold greater extent of sensory axon regeneration in the spinal cord than sciatic nerve crush. We found that more severe peripheral demyelination correlates with more severe functional and electrophysiological deficits, but more robust central regeneration. Ethidium bromide injection does not activate macrophages at the demyelinated sciatic nerve site, as observed after nerve crush, but briefly activates macrophages in the dorsal root ganglion. This study provides a new method for investigating the underlying mechanisms of the conditioning response and suggests that loss of the peripheral myelin may be a major signal to change the intrinsic growth state of adult sensory neurons and promote regeneration.

  15. Aluminium Electroplating on Steel from a Fused Bromide Electrolyte

    Energy Technology Data Exchange (ETDEWEB)

    Prabhat Tripathy; Laura Wurth; Eric Dufek; Toni Y. Gutknecht; Natalie Gese; Paula Hahn; Steven Frank; Guy Fredrickson; J Stephen Herring


    A quaternary bromide bath (LiBr-KBr-CsBr-AlBr3) was used to electro-coat aluminium on steel substrates. The electrolyte was prepared by the addition of AlBr3 into the eutectic LiBr-KBr-CsBr melt. A smooth, thick, adherent and shiny aluminium coating could be obtained with 80 wt.% AlBr3 in the ternary melt. The SEM photographs of the coated surfaces suggest the formation of thick and dense coatings with good aluminium coverage. Both salt immersion and open circuit potential measurement suggest that the coatings did display good corrosion-resistance behavior. Annealing of the coated surfaces, prior to corrosion tests, suggested the robustness of the metallic aluminium coating in preventing the corrosion of the steel surfaces. Studies also indicated that the quaternary bromide plating bath can potentially provide a better aluminium coating on both ferrous and non-ferrous metals, including complex surfaces/geometries.

  16. Preparation of ethyl magnesium bromide for regiospecific analysis of triacylglycerols. (United States)

    Ando, Yasuhiro; Tomita, Yuki; Haba, Yusuke


    This paper presents a procedure for preparation of a Grignard reagent, ethyl magnesium bromide, used for partial deacylation of triacylglycerols (TAG) in their regiospecific analysis. Magnesium turnings were reacted with ethereal solution of bromoethane in a screw-capped test tube to synthesize 2 mL of 1 M ethyl magnesium bromide. Continuously stirred with a vortex mixer, the reaction smoothly proceeded at room temperature. Regiospecific analysis of 1,3-distearoyl-2-oleoylglycerol using this product showed that fatty acid compositions of the sn-1(3) and sn-2 positions were contaminated by less than 2 mol% of fatty acids migrated from isomeric positions. The analyses of lard and cod liver/mackerel oil TAG showed typical distribution patterns of 16:0, 22:5n-3 and 22:6n-3 in pig and fish depot TAG. These results confirmed the view that the freshly prepared reagent is usable for regiospecific analysis of TAG.

  17. Surfactant-Assisted Coal Liquefaction (United States)

    Hickey, Gregory S.; Sharma, Pramod K.


    Obtaining liquid fuels from coal which are economically competitive with those obtained from petroleum based sources is a significant challenge for the researcher as well as the chemical industry. Presently, the economics of coal liquefaction are not favorable because of relatively intense processing conditions (temperatures of 430 degrees C and pressures of 2200 psig), use of a costly catalyst, and a low quality product slate of relatively high boiling fractions. The economics could be made more favorable by achieving adequate coal conversions at less intense processing conditions and improving the product slate. A study has been carried out to examine the effect of a surfactant in reducing particle agglomeration and improving hydrodynamics in the coal liquefaction reactor to increase coal conversions...

  18. Sensitization of Eriochromeazurol-B in Presence of Cetyldimethylethylammonium Bromide for the Microdetermination of Some Lanthanides

    Directory of Open Access Journals (Sweden)

    Anil B. Zade


    Full Text Available Cetyldimethylethylammonium bromide, a cationic surfactant has been used to decolorize eriochromeazurol B, an anionic triphenylmethane type of dye. Addition of specific lanthanide metal ion to this decolorized solution resulted into intense colored stable ternary complex with large bathochromic shift from 540 nm (binary complex to 650 nm (ternary complex with increase in absorbance values at shifted wavelength. CDMEAB thus decreases the color intensity of ECAB and increases the absorbance value of ternary complexes. This two fold advantage resulted into enhancement in molar absorptivities and sensitivities at shifted wavelength of ternary complexes with stoichiometric composition 1:(1:32, [Ln : (R:S] for all lanthanides understudy namely yttrium, neodymium, europium, terbium and ytterbium. The ternary complexes at pH 6.0 exhibited absorption maxima at 650 nm with molar absorptivities 69000 for Y(III, 66000 for Nd(III, 69000 for Eu(III, 64000 for Tb(III, 70000 for Yb(III. Beer's law were obeyed in concentration range 0.11-0.94, 0.19-1.53, 0.2-1.41, 0.21-1.69 and 0.23-1.11 ppm for Y(III, Nd(III, Eu(III, Tb(III and Yb(III respectively. Conditional formation constants and various analytical parameters have been evaluated and compared the results of newly formed ternary complexes with binary complexes. Finally newly suggested modified method have been recommended for the microdetermination of lanthanides understudy.

  19. Nutrient removal by Chlorella vulgaris F1068 under cetyltrimethyl ammonium bromide induced hormesis. (United States)

    Zhou, Qiongzhi; Li, Feng; Ge, Fei; Liu, Na; Kuang, Yangduo


    Toxicants are generally harmful to biotechnology in wastewater treatment. However, trace toxicant can induce microbial hormesis, but to date, it is still unknown how this phenomenon affects nutrient removal during municipal wastewater treatment process. Therefore, this study focused on the effects of hormesis induced by cetyltrimethyl ammonium bromide (CTAB), a representative quaternary ammonium cationic surfactant, on nutrient removal by Chlorella vulgaris F1068. Results showed that when the concentration of CTAB was less than 10 ng/L, the cellular components chlorophyll a, proteins, polysaccharides, and total lipids increased by 10.11, 58.17, 38.78, and 11.87 %, respectively, and some enzymes in nutrient metabolism of algal cells, such as glutamine synthetase (GS), acid phosphatase (ACP), H(+)-ATPase, and esterase, were also enhanced. As a result, the removal efficiencies of ammonia nitrogen (NH4 (+)) and total phosphorus (TP) increased by 14.66 and 8.51 %, respectively, compared to the control during a 7-day test period. The underlying mechanism was mainly due to an enhanced photosynthetic activity of C. vulgaris F1068 indicated by the increase in chlorophyll fluorescence parameters (the value of Fv/Fm, ΦII, Fv/Fo, and rETR increased by 12.99, 7.56, 25.59, and 8.11 %, respectively) and adenylate energy charge (AEC) (from 0.68 to 0.72). These results suggest that hormesis induced by trace toxicants could enhance the nutrient removal, which would be further considered in the design of municipal wastewater treatment processes. Graphical abstract The schematic mechanism of C. vulgaris F1068 under CTAB induced hormesis. Green arrows ( ) represent the increase and the red arrow ( ) represents the decrease.

  20. [Adsorption of phenanthrene from aqueous solution on cetylpyridinium bromide (CPB) -modified zeolite]. (United States)

    Li, Jia; Lin, Jian-Wei; Zhan, Yan-Hui; Chen, Zu-Mei; Wang, Peng-Jun


    Surfactant-modified zeolites (SMZs) with different coverage types were prepared by loading of different amounts of cetylpyridinium bromide (CPB) onto natural zeolites and were used as adsorbents to remove phenanthrene from aqueous solution. The adsorption of phenanthrene from aqueous solution on monolayer and bilayer SMZs as a function of adsorbent dosage, initial phenanthrene concentration, contact time, and temperature was investigated using batch experiments. Results showed monolayer and bilayer SMZs were effective for the removal of phenanthrene from aqueous solution. The phenanthrene removal efficiency of SMZs increased with increasing adsorbent dosage, but the amount of phenanthrene adsorbed on SMZs decreased with increasing adsorbent dosage. The adsorption kinetics of phenanthrene on SMZs well followed a pseudo-second-order kinetic model. The equilibrium adsorption data of phenanthrene on SMZs at a low concentration of phenanthrene in solution could be described by the Linear equation and Freundlich equation. The main mechanism for phenanthrene adsorption onto monolayer SMZ is hydrophobic interaction, and the main mechanism for phenanthrene adsorption onto bilayer SMZ is organic partitioning. The calculated thermodynamic parameters such as Gibbs free energy change (deltaG(theta)), enthalpy changes (deltaH(theta)), and entropy change (deltaS(theta)) showed that the adsorption process of phenanthrene on SMZs is spontaneous and exothermic in nature. When the CPB loading amount of bilayer SMZ was twice as much as that of monolayer SMZ, the phenanthrene adsorption capacity for bilayer SMZ was slightly higher than that for monolayer SMZ. In a conclusion, both monolayer and bilayer SMZs are promising adsorbents for the removal of phenanthrene from water and wastewater, and monolayer SMZ is a more cost-effective adsorbent for phenanthrene removal than bilayer SMZ.

  1. How myristyltrimethylammonium bromide enhances biomass harvesting and pigments extraction from Synechocystis sp. PCC 6803. (United States)

    Zhou, Yun; Lai, YenJung Sean; Eustance, Everett; Straka, Levi; Zhou, Chen; Xia, Siqing; Rittmann, Bruce E


    Myristyltrimethylammonium bromide (MTAB) is a cationic surfactant used to improve biomass harvesting and pigment extraction form microalgae, but the mechanisms underlying its effectiveness are poorly defined. We document the mechanisms for enhanced harvesting and pigment extraction for the cyanobacterium Synechocystis sp. PCC 6803 using measurements from flow cytometer, zeta potential, release of soluble components, and microscopy. Harvesting efficiency increased as the MTAB/Biomass dose increased from 0 to 40%. A low MTAB dose (≤ 8%) mainly brought about coagulation and flocculation, which led to aggregation that improved harvesting, but 40% MTAB had the highest harvesting efficiency, 62%. Adding MTAB above a MTAB/Biomass dose of 8% also increased cell-membrane permeability, which allowed the solvent (ethyl acetate) to pass into the cells and resulted in a large increase in extraction efficiency of pigments: An MTAB/Biomass ratio of 60% for 180 min achieved the highest extraction efficiencies of chlorophyll and carotenoids, 95% and 91%, respectively. Combining harvesting and extraction performances with results from flow cytometry, zeta potential, release of soluble components, and microscopy lead to the following mechanistic understandings. MTAB dose from 8% to 40% solubilized EPS, which lowered the biomass's negative charge, but caused breakup of the large aggregates. An increase of cell permeability also in this stage allowed ethyl acetate to pass into the cells and achieve better pigment extraction. MTAB >40% led to cell lysis and a large increase in soluble organics, but complete cell lysis was not required to achieve the maximum extraction efficiency. The MTAB/Biomass % ratio for optimizing harvest efficiency and pigment extraction lay in the range of 40%-60%. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. Gemini surfactants from natural amino acids. (United States)

    Pérez, Lourdes; Pinazo, Aurora; Pons, Ramon; Infante, Mrosa


    In this review, we report the most important contributions in the structure, synthesis, physicochemical (surface adsorption, aggregation and phase behaviour) and biological properties (toxicity, antimicrobial activity and biodegradation) of Gemini natural amino acid-based surfactants, and some potential applications, with an emphasis on the use of these surfactants as non-viral delivery system agents. Gemini surfactants derived from basic (Arg, Lys), neutral (Ser, Ala, Sar), acid (Asp) and sulphur containing amino acids (Cys) as polar head groups, and Geminis with amino acids/peptides in the spacer chain are reviewed.

  3. Liquid-liquid extraction for surfactant-contaminant separation and surfactant reuse

    Energy Technology Data Exchange (ETDEWEB)

    Hasegawa, M.A. [Surbec Environmental, Norman, OK (United States); Sabatini, D.A.; Harwell, J.H. [Univ. of Oklahoma, Norman, OK (United States)


    Liquid-liquid extraction was investigated for use with surfactant enhanced subsurface remediation. A surfactant liquid-liquid extraction model (SLLEM) was developed for batch equilibrium conditions based on contaminant partitioning between micellar, water, and solvent phases. The accuracy of this fundamental model was corroborated with experimental results (using naphthalene and phenanthrene as contaminants and squalane as the extracting solvent). The SLLEM model was then expanded to nonequilibrium conditions. The effectiveness of this nonequilibrium model was corroborated with experimental results from continuous flow hollow fiber membrane systems. The validated models were used to conduct a sensitivity analysis evaluating the effects of surfactants on the removal of the contaminants in liquid-liquid extraction systems. In addition, liquid-liquid extraction is compared to air stripping for surfactant-contaminant separation. Finally, conclusions are drawn as to the impact of surfactants on liquid-liquid extraction processes, and the significance of these impacts on the optimization of surfactant-enhanced subsurface remediation.

  4. Synthesis and Characterization of Zirconia Nanocrystallites by Cationic Surfactant and Anionic Surfactant

    Institute of Scientific and Technical Information of China (English)


    Study on nanomaterials has attracted great interests in recent years. In this article,zirconia nanocrystallites of different structures have been successfully synthesized via hydrothermal methods with cationic surfactant (CTAB) and anionic surfactant (SDS), respectively. Differential Scanning Calorimeter (DSC-TG), X-ray Diffractometer (XRD), Transmission Electron Microscope (TEM), Ultraviolet-Visible (UV-vis) and N2 adsorption-desorption analyses are used for their structure characteristics. The results show that the cationic surfactant has a distinctive direction effect on the formation of zirconia nanocrystallites, while the anionic surfactant has a self-assembly synergistic effect on them. The sample synthesized with the cationic surfactant presents good dispersion with the main phase of tetragonal zirconia, and the average nanocryst al size is around 15nm after calcination at 500 ℃. While the sample synthesized with the anionic surfactant exhibits a worm-like mesoporous structure with pure tetragonal phase after calcination at 500 ℃ and with good thermal stability.

  5. Studies on the electrocapillary curves of anionic surfactants in presence of non-ionic surfactants. (United States)

    Bembi, R; Goyal, R N; Malik, W U


    Polyoxyethylated non-ionic surfactants such as Tween 20, Tween 40, Nonidet P40 and Nonex 501 have been supposed to be associated with cationic characteristics. Studies on the effect of these surfactants on the electrocapillary curves of the anionic surfactants Aerosol IB, Manaxol OT and sodium lauryl sulphate (SLS), show that the electrocapillary maxima shift towards positive potentials. The order of adsorption of the anionic surfactants is SLS > Manaxol OT > Aerosol IB while the shift in maxima is in the order Aerosol IB ~ Manaxol OT > SLS which confirms association of cationic characteristics with the micelles of these non-ionic surfactants. The magnitude of the shift in electrocapillary maxima is Nonex 501 > Nonidet P40 > Tween 20 > Tween 40 which may be the order of magnitude of the positive charge carried by these non-ionic surfactants.

  6. Transformation of bromide in thermo activated persulfate oxidation processes. (United States)

    Lu, Junhe; Wu, Jinwei; Ji, Yuefei; Kong, Deyang


    Sulfate radicals ( [Formula: see text] ) are applied to degrade various organic pollutants. Due to its high oxidative potential, [Formula: see text] is presumed to be able to transform bromide to reactive bromine species that can react with natural organic matter subsequently to form brominated products including brominated disinfection by-products (Br-DBPs). This research was designed to investigate the transformation of bromide in thermo activated persulfate oxidation process in the presence of humic acid (HA). Significant formation of bromoform and bromoacetic acids was verified. Their formation was attributed to the reactions of HA and reactive bromine species including Br·, [Formula: see text] HOBr(-), and free bromine resulted from the oxidation of bromide by [Formula: see text] . Yields of Br-DBPs increased monotonically at persulfate concentration of 1.0 mM and working temperature of 70 °C. However, the time-depended formation exhibited an increasing and the decreasing profile when persulfate was 5.0 mM, suggesting further degradation of organic bromine. HPLC/ICP-MS analysis demonstrated that the organic bromine was eventually transformed to bromate at this condition. Thus, a transformation scheme was proposed in which the bromine could be recycled multiple times between inorganic bromide and organic bromine before being finally transformed to bromate. This is the first study that reveals the comprehensive transformation map of bromine in [Formula: see text] based reaction systems, which should be taken into consideration when such technologies are used to eliminate contamination in real practice.

  7. A Lithium Bromide Absorption Chiller with Cold Storage (United States)


    TO R A G E A LITHIUM BROMIDE ABSORPTION CHILLER WITH COLD STORAGE William Gerstler, et al, General Electric Global Research UNCLASSIFIED UNLIMITED...Research ABSTRACT A LiBr-based absorption chiller can use waste heat or solar energy to produce useful space cooling for small buildings...However, operating this absorption chiller at high ambient tem- peratures may result in performance degradation, crystallization in the absorber, and



    Mallika Selvaraj; Sumathi


    AIM To compare the two drugs drotaverine hydrochloride and valethamate bromide and their effects on cervical dilatation and labour duration. METHODOLOGY It is a prospective study undertaken at Government Rajaji Hospital on 150 randomly selected primigravidae patients. RESULTS The duration of active phase of first stage of labour was significantly reduced (p value 0.003), rate of cervical dilatation was higher (p value 0.0001) with drotaverine hydrochloride. CONCLUS...

  9. Gemini阳离子表面活性剂的合成及其胶束生成 Gemini阳离子表面活性剂的合成及其胶束生成%Synthesis of Alkanediyl-α,ω-bis(Dimethyl Dodecylammonium Bromide) and their Micelle Formation in Aqueous Solutions

    Institute of Scientific and Technical Information of China (English)

    游毅; 郑欧; 邱羽; 郑叶鸿; 赵剑曦; 韩国彬


    Cationic Gemini surfactants, alkanediyl-α,ω-bis(dimethyldodecylammonium bromide) have been synthesized by the following method: firstly dodecyl bromide was prepared by the reaction of dodecanol with bromic acid in the presence of strong sulfuric acid. Dodecylbromide was then reacted with N,N-tetramethyl ethane diamine(or N,N-tetramethyl hexana diamine) to prepare the title-compounds. Micellization of these Gemini surfactants was investigated using conductivity measurement. The results showed that the critical micelle concentration(cmc) of the Gemini surfactants has a much lower value compared with that of the corresponding “ monomer” . For a series of the Geminis with the same length(s) in the spacer chain, the cmc decreased with increasing the carbon number (m) in the alkyl chain. The aggregation number(N) of the micelle also drastically decreased with m. For the same value of m, the cmc varied slightly with s, which indicated that the electrostatic interaction between the ionic-groups of the “ monomer” has been naturally changed duo to a link between the two ionic-groups of the “ monomer” through a spacer. However, N was strongly decreased with s,which may be a reason of steric inhibition coming from the ionic-groups due to a link of spacer. With increasing temperature, micellization of the Gemini surfactants was slightly enhanced.

  10. Water-solubilization of alkyloxo(methoxo)porphyrinatoantimony bromides. (United States)

    Matsumoto, Jin; Tanimura, Shin-ichiro; Shiragami, Tsutomu; Yasuda, Masahide


    In order to develop water-soluble porphyrins, alkyloxo(methoxo)porphyrinatoantimony bromides (alkyl = hexyl (1a), decyl (1b), dodecyl (1c), tetradecyl (1d), octadecyl (1e)) were prepared. 1 had more than 1 mmol dm(-3) of solubility in water. From the dependence of the half-width of the bands in the absorption spectra and surface tension on the concentration of 1, it was estimated that 1b-d were present as aggregates in concentrations higher than 10 micromol dm(-3). From the NMR analysis in D(2)O, it was deduced that the alkyloxo ligands of 1 were arranged alternately in the aggregates. The diameter of the aggregates of 1 in water was determined to be around 100 nm by the dynamic light scattering method. Since the solubilities of di(methoxo)tetraphenylporphyrinatoantimony bromide and 5-(4'-decyloxyphenyl)-10,15,20-triphenylporphyrinato(dimethoxo)antimony(v) bromide were low, it was calculated that the long alkyl axial ligands were requisite for the high solubility in water.

  11. Conservative tracer bromide inhibits pesticide mineralisation in soil. (United States)

    Bech, Tina B; Rosenbom, Annette E; Sørensen, Sebastian R; Jacobsen, Carsten S


    Bromide is a conservative tracer that is often applied with non-conservative solutes such as pesticides to estimate their retardation in the soil. It has been applied in concentrations of up to 250 g Br L(-1), levels at which the growth of single-celled organisms can be inhibited. Bromide applications may therefore affect the biodegradation of non-conservative solutes in soil. The present study investigated the effect of potassium bromide (KBr) on the mineralisation of three pesticides - glyphosate, MCPA and metribuzin - in four agricultural A-horizon soils. KBr was added to soil microcosms at concentrations of 0, 0.5, 2.5 and 5 g Br(-) L(-1) in the soil solution. The study concluded that KBr had a negative effect on pesticide mineralisation. The inhibitory effect varied depending on the KBr concentration, the type of pesticide and the type of soil. Furthermore, 16 S amplicon sequencing revealed that the KBr treatment generally reduced the abundance of bacteroidetes and proteobacteria on both an RNA and DNA level. Therefore, in order to reduce the effect of KBr on the soil bacterial community and consequently also on xenobiotic degradation, it is recommended that KBr be applied in a concentration that does not exceed 0.5 g Br(-) L(-1) in the soil water.

  12. Structural, vibrational and theoretical studies of L-histidine bromide (United States)

    Ahmed, A. Ben; Feki, H.; Abid, Y.; Boughzala, H.; Mlayah, A.


    This paper presents the results of our calculations of the geometric parameters, vibrational spectra and hyperpolarizability of a non linear optical material, L-histidine bromide. Due to the lack of sufficiently precise information on the geometric structure available in literature, theoretical calculations were preceded by re-determination of the crystal X-ray structure. Single crystals of L-histidine bromide have been grown by slow evaporation of an aqueous solution at room temperature. The compound crystallizes in the non-Centro symmetric space group P2 12 12 1 of the orthorhombic system. Raman spectra have been recorded in the range [200-3500 cm -1]. All observed vibrational bands have been discussed and assigned to normal mode or to combinations and overtones on the basis of our calculations. The optimized geometric bond lengths and bond angles obtained by using HF and DFT (B3LYP and BLYP) show good agreement with the experimental data. Comparison between the measured and the calculated vibrational frequencies indicate that B3LYP is superior to the scaled HF approach for molecular vibrational problems. To investigate microscopic second order non linear optical properties of L-histidine bromide, the electric dipole μ, the polarizability α and the hyperpolarizability β were computed using DFT//B3LYP/6-31G(d) method. According to our calculations, the title compound exhibits non-zero β value revealing microscopic second order NLO behaviour.

  13. Oral teratogenicity studies of methyl bromide in rats and rabbits. (United States)

    Kaneda, M; Hojo, H; Teramoto, S; Maita, K


    Teratogenicity studies of methyl bromide, a widely used fumigant, were conducted in rats and rabbits. Methyl bromide was dissolved in corn oil and administered orally to groups of 24 copulated female Crj:CD (SD) rats at dose levels of 0 (corn oil), 3, 10 or 30 mg/kg/day on days 6-15 of gestation and to groups of 18 artificially inseminated female Kbl:JW rabbits at 0, 1, 3 or 10 mg/kg/day on days 6-18 of gestation. Maternal rats and rabbits were euthanized on respective days 20 and 27 of gestation. Foetuses were examined for survival, growth and teratological alterations. Maternal toxicity was evident in the high-dose groups for both species. In these groups, maternal body weight gains and food consumption were significantly decreased during the dosing and post-dosing periods. Necropsy of maternal rats also revealed erosive lesions in the stomach and the surrounding organs. However, no treatment-related adverse effects were found in foetuses of the treated groups for both rat and rabbit studies. These results led to the conclusion that methyl bromide was not foetotoxic or teratogenic to rat and rabbit foetuses up to dose levels of 30 and 10 mg/kg/day, respectively, at which maternal toxicity was evident for both species.

  14. Degradation of soil-sorbed trichloroethylene by stabilized zero valent iron nanoparticles: Effects of sorption, surfactants, and natural organic matter

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Man [Auburn University, Auburn, Alabama; He, Feng [ORNL; Zhao, Dongye [Auburn University, Auburn, Alabama; Hao, Xiaodi [Beijing University of Civil Engineering and Architecture


    Zero valent iron (ZVI) nanoparticles have been studied extensively for degradation of chlorinated solvents in the aqueous phase, and have been tested for in-situ remediation of contaminated soil and groundwater. However, little is known about its effectiveness for degrading soil-sorbed contaminants. This work studied reductive dechlorination of trichloroethylene (TCE) sorbed in two model soils (a potting soil and Smith Farm soil) using carboxymethyl cellulose (CMC) stabilized Fe-Pd bimetallic nanoparticles. Effects of sorption, surfactants and dissolved organic matter (DOC) were determined through batch kinetic experiments. While the nanoparticles can effectively degrade soil-sorbed TCE, the TCE degradation rate was strongly limited by desorption kinetics, especially for the potting soil which has a higher organic matter content of 8.2%. Under otherwise identical conditions, {approx}44% of TCE sorbed in the potting soil was degraded in 30 h, compared to {approx}82% for Smith Farm soil (organic matter content = 0.7%). DOC from the potting soil was found to inhibit TCE degradation. The presence of the extracted SOM at 40 ppm and 350 ppm as TOC reduced the degradation rate by 34% and 67%, respectively. Four prototype surfactants were tested for their effects on TCE desorption and degradation rates, including two anionic surfactants known as SDS (sodium dodecyl sulfate) and SDBS (sodium dodecyl benzene sulfonate), a cationic surfactant hexadecyltrimethylammonium (HDTMA) bromide, and a non-ionic surfactant Tween 80. All four surfactants were observed to enhance TCE desorption at concentrations below or above the critical micelle concentration (cmc), with the anionic surfactant SDS being most effective. Based on the pseudo-first-order reaction rate law, the presence of 1 x cmc SDS increased the reaction rate by a factor of 2.5 when the nanoparticles were used for degrading TCE in a water solution. SDS was effective for enhancing degradation of TCE sorbed in Smith Farm

  15. Synthesis of novel quaternary ammonium surfactants containing adamantane

    Institute of Scientific and Technical Information of China (English)

    Jian Wei Guo; Xing Zhong; Hua Zhu; Li Juan Feng; Ying De Cui


    A series of novel quaternary ammonium surfactants containing adamantane were designed and synthesized from 1-adamantanecarboxylic acid.The structures of target surfactants were confirmed by 1H NMR,elements analysis and FTIR.Surface properties of these surfactants were investigated.Due to the lipophilicity of adamantane,the critical micelle concentration (CMC) and C20 values of the synthesized quaternary ammonium surfactants are lower than that of conventional quaternary ammonium surfactants.

  16. Synthesis and Solution Properties of Adamantane Containing Quaternary Ammonium Salt-type Cationic Surfactants: Hydrocarbon-based, Fluorocarbonbased and Bola-type. (United States)

    Yoshimura, Tomokazu; Okada, Mari; Matsuoka, Keisuke


    Quaternary ammonium salt-type cationic surfactants with an adamantyl group (hydrocarbon-type; CnAdAB, fluorocarbon-type; Cm(F)C3AdAB, bola-type; Ad-s-Ad, where n, m and s represent hydrocarbon chain lengths of 8-16, fluorocarbon chain lengths of 4-8, and spacer chain length of 10-12) were synthesized via quaternization of N, N-dimethylaminoadamantane and n-alkyl bromide or 1, n-dibromoalkane. Conductivity and surface tension were measured to characterize the solution properties of the synthesized adamantyl group-containing cationic surfactants. In addition, the effects of hydrocarbon and fluorocarbon chain lengths and spacer chain length between headgroups on the measured properties were evaluated by comparison with those of conventional cationic surfactants. The critical micelle concentration (CMC) of CnAdAB and Ad-s-Ad was 2/5 of that for the corresponding conventional surfactants CnTAB and bola-type surfactants with similar number of carbons in the alkyl or alkylene chain; this was because of the increased hydrophobicity due to the adamantyl group. A linear relationship between the logarithm of CMC and the hydrocarbon chain length for CnAdAB was observed, as well as for CnTAB. The slope of the linear correlation for both surfactants was almost the same, indicating that the adamantyl group does not affect the CMC with variations in the hydrocarbon chain length. Similar to conventional surfactants CnTAB, the hydrocarbon-type CnAdAB is highly efficient in reducing the surface tension of water, despite the large occupied area per molecule resulting from the relatively bulky structure of the adamantane skeleton. On the other hand, the bola-type Ad-s-Ad resulted in increased surface tension compared to CnAdAB, indicating that the curved chain between adamantyl groups leads to poor adsorption and orientation at the air-water interface.

  17. 表面活性剂对苯并[a]芘在黑炭表面吸附解吸的影响%Effect of Surfactants on Sorption and Desorption of Benzo[a]pyrene onto Black Carbon

    Institute of Scientific and Technical Information of China (English)

    张景环; 陈春溶; 张玮航; 栗桂州


    通过静态吸附实验,研究了3种不同类型的表面活性剂(阳离子∶十六烷基三甲基溴化铵,CTAB;阴离子∶十二烷基苯磺酸钠,SDBS∶非离子,曲拉通100,TX100)对苯并[a]芘(BaP)在黑炭表面吸附解吸的影响.结果表明,3种表面活性剂的存在均会增加BaP在黑炭表面吸附的非线性程度.CTAB的存在可以促进BaP在黑炭表面的吸附同时抑制了BaP的解吸,然而SDBS的存在降低了BaP在黑炭表面的吸附并增加了吸附过程的可逆性.与CTAB和SDBS不同,TX100对BaP在黑炭表面吸附解吸的影响取决于其添加浓度.低浓度的TX100(50 mg.L-1)能够促进BaP在黑炭上的吸附并抑制BaP的解吸,吸附能力参数Kd值(在ce=50μg.L-1下)从188 062 mL.g-1增大到264 179 mL.g-1,解吸滞后指数HI从0.44降低到0.39.随着TX100浓度增加到150 mg.L-1和200 mg.L-1,TX100对BaP的吸附表现出抑制作用并能够促进BaP的解吸,Kd值(在ce=50μg.L-1下)从188 062 mL.g-1分别降低到182 751 mL.g-1和178 730 mL.g-1,解吸滞后指数从0.44分别升高到0.65和0.70.本研究为预测多环芳烃在表面活性剂污染的环境中的分布特征和最终归趋提供了理论依据.%Sorption and desorption of benzo[a]pyrene(BaP) onto black carbon(BC) extracted from sediment were studied in the presence of three types of surfactants(cetyltrimethylammonium bromide,CTAB;sodium dodecylbenzene sulfonate,SDBS;Triton X-100,TX100) to examine the role of surfactants in sorption and desorption.Nonlinearity of the sorption isotherms of BaP increased in the presence of surfactants.CTAB enhanced the sorption capacity and irreversibility of BaP on BC.However,the presence of SDBS reduced the sorption capacity and desorption hysteresis.Unlike CTAB and SDBS,the influence of TX100 on sorption and desorption was concentration dependent.Low levels of TX100(50 mg·L-1) enhanced BaP sorption and reduced desorption.The sorption capacity parameter Kd value

  18. Lung surfactant levels are regulated by Ig-Hepta/GPR116 by monitoring surfactant protein D.

    Directory of Open Access Journals (Sweden)

    Taku Fukuzawa

    Full Text Available Lung surfactant is a complex mixture of lipids and proteins, which is secreted from the alveolar type II epithelial cell and coats the surface of alveoli as a thin layer. It plays a crucial role in the prevention of alveolar collapse through its ability to reduce surface tension. Under normal conditions, surfactant homeostasis is maintained by balancing its release and the uptake by the type II cell for recycling and the internalization by alveolar macrophages for degradation. Little is known about how the surfactant pool is monitored and regulated. Here we show, by an analysis of gene-targeted mice exhibiting massive accumulation of surfactant, that Ig-Hepta/GPR116, an orphan receptor, is expressed on the type II cell and sensing the amount of surfactant by monitoring one of its protein components, surfactant protein D, and its deletion results in a pulmonary alveolar proteinosis and emphysema-like pathology. By a coexpression experiment with Sp-D and the extracellular region of Ig-Hepta/GPR116 followed by immunoprecipitation, we identified Sp-D as the ligand of Ig-Hepta/GPR116. Analyses of surfactant metabolism in Ig-Hepta(+/+ and Ig-Hepta(-/- mice by using radioactive tracers indicated that the Ig-Hepta/GPR116 signaling system exerts attenuating effects on (i balanced synthesis of surfactant lipids and proteins and (ii surfactant secretion, and (iii a stimulating effect on recycling (uptake in response to elevated levels of Sp-D in alveolar space.

  19. Lung surfactant levels are regulated by Ig-Hepta/GPR116 by monitoring surfactant protein D. (United States)

    Fukuzawa, Taku; Ishida, Junji; Kato, Akira; Ichinose, Taro; Ariestanti, Donna Maretta; Takahashi, Tomoya; Ito, Kunitoshi; Abe, Jumpei; Suzuki, Tomohiro; Wakana, Shigeharu; Fukamizu, Akiyoshi; Nakamura, Nobuhiro; Hirose, Shigehisa


    Lung surfactant is a complex mixture of lipids and proteins, which is secreted from the alveolar type II epithelial cell and coats the surface of alveoli as a thin layer. It plays a crucial role in the prevention of alveolar collapse through its ability to reduce surface tension. Under normal conditions, surfactant homeostasis is maintained by balancing its release and the uptake by the type II cell for recycling and the internalization by alveolar macrophages for degradation. Little is known about how the surfactant pool is monitored and regulated. Here we show, by an analysis of gene-targeted mice exhibiting massive accumulation of surfactant, that Ig-Hepta/GPR116, an orphan receptor, is expressed on the type II cell and sensing the amount of surfactant by monitoring one of its protein components, surfactant protein D, and its deletion results in a pulmonary alveolar proteinosis and emphysema-like pathology. By a coexpression experiment with Sp-D and the extracellular region of Ig-Hepta/GPR116 followed by immunoprecipitation, we identified Sp-D as the ligand of Ig-Hepta/GPR116. Analyses of surfactant metabolism in Ig-Hepta(+/+) and Ig-Hepta(-/-) mice by using radioactive tracers indicated that the Ig-Hepta/GPR116 signaling system exerts attenuating effects on (i) balanced synthesis of surfactant lipids and proteins and (ii) surfactant secretion, and (iii) a stimulating effect on recycling (uptake) in response to elevated levels of Sp-D in alveolar space.

  20. Effects of Interactions Among Surfactants,Water and Oil on Equilibrium Configuration of Surfactant-Water-Oil Systems

    Institute of Scientific and Technical Information of China (English)

    YUAN Yin-quan; SUN Zhi-bo; XIE Yun; ZOU Xian-wu


    The distribution and configuration of surfactants at interface in surfactant-water-oil systems have been investigated using discontinuous molecular dynamic simulations. There exists a certain equilibrium concentration of surfactants at interface for the systems with certain interactions among surfactant, water and oil. The interface length and equilibrium morphology of the systems are dependent on the equilibrium concentration of surfactants at interface and the total amount of surfactants. The interaction strengths among surfactant, water and oil determine the equilibrium concentration of surfactants at interface. Three typical configurations of surfactants at interface have been observed: ① surfactant molecules are perpendicular to the interface and arranged closely; ② perpendicular to the interface and arranged at interval of two particles; ③ lie down in the interface partly.

  1. Surfactant, but not the size of solid lipid nanoparticles (SLN) influences viability and cytokine production of macrophages. (United States)

    Schöler, N; Olbrich, C; Tabatt, K; Müller, R H; Hahn, H; Liesenfeld, O


    After intravenous (i.v.) injection, solid lipid nanoparticles (SLN) interact with mononuclear cells. Murine peritoneal macrophages were incubated with SLN formulations consisting of Dynasan 114 coated with different surfactants. The present study was performed to examine the impact of surfactants, which are important surface defining components of SLN, on viability and cytokine production by macrophages. Cytotoxicity, as assessed by the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-tetrazolium bromide (MTT) test, was strongly influenced by the surfactant used being marked with cetylpyridinium chloride- (CPC-) coated SLN at a concentration of 0.001% and further increased at SLN concentrations of 0.01 and 0.1%. All other SLN formulations -- containing Poloxamine 908 (P908), Poloxamer 407 (P407), Poloxamer 188 (P188), Solutol HS15 (HS15), Tween 80 (T80), Lipoid S75 (S75), sodium cholate (SC), or sodium dodecylsulfate (SDS) -- when used at the same concentrations reduced cell viability only slightly. None of the SLN formulations tested induced cytokine production but a concentration-dependent decrease of IL-6 production was observed, which appeared to be associated with cytotoxic effects. IL-12 and TNF-alpha were detected neither in supernatants of macrophages treated with SLN at any concentration nor in those of untreated cells. In contrast to the type of surfactant, the size of SLN was found neither to affect cytotoxicity of SLN nor to result in induction or digression of cytokine production by macrophages. In conclusion, testing the effects of surfactants on SLN on activity of macrophages is a prerequisite prior to in vivo use of SLN.

  2. Plasmid-mediated biodegradation of the anionic surfactant sodium dodecyl sulphate, by Pseudomonas aeruginosa S7. (United States)

    Yeldho, Deepthi; Rebello, Sharrel; Jisha, M S


    Sodium dodecyl sulphate (SDS), an anionic surfactant, has been used extensively due to its low cost and excellent foaming properties. Fifteen different bacterial isolates capable of degrading SDS were isolated from detergent contaminated soil by enrichment culture technique and the degradation efficiency was assessed by Methylene Blue Active Substances (MBAS) assay. The most efficient SDS degrading isolate was selected and identified as Pseudomonas aeruginosa S7. The selected isolate was found to harbor a single 6-kb plasmid. Acridine orange, ethidium bromide, SDS and elevated temperatures of incubation failed to cure the plasmid. The cured derivatives of SDS degrading Pseudomonas aeruginosa were obtained only when ethidium bromide and elevated temperature (40 °C) were used together. Transformation of E. coli DH5α with plasmid isolated from S7 resulted in subsequent growth of the transformants on minimal salt media with SDS (0.1%) as the sole source of carbon. The SDS degradation ability of S7 and the transformant was found to be similar as assessed by Methylene Blue Active Substance Assay. The antibiotic resistance profiles of S7, competent DH5α and transformant were analyzed and it was noted that the transfer of antibiotic resistance correlated with the transfer of plasmid as well as SDS degrading property.

  3. The removal of phenol from aqueous solutions by adsorption using surfactant-modified bentonite and kaolinite

    Energy Technology Data Exchange (ETDEWEB)

    Alkaram, Uday F.; Mukhlis, Abduljabar A. [Department of Chemistry, College of Education, Ibn Al-Haitham, University of Baghdad, Baghdad (Iraq); Al-Dujaili, Ammar H., E-mail: [Department of Chemistry, College of Education, Ibn Al-Haitham, University of Baghdad, Baghdad (Iraq)


    The natural bentonite (BC) and kaolinite (KC) were modified with two surfactant of hexadecyltrimethylammonium bromide (HDTMA) and phenyltrimethylammonium bromide (PTMA) to form four kinds of organic-modified clays, i.e., HDTMA-bentonite (BHM), HDTMA-kaolinite (KHM), PTMA-bentonite (KPM) and PTMA-kaolinite (KPM). The modified minerals were characterized by X-ray fluorescence (XRF), X-ray diffraction (XRD) and FT-IR spectroscopy. The surface areas were determined using methylene blue adsorption method. Cation-exchange capacity (CEC) was estimated using an ethylenediamine complex of copper method and the modifier loading was calculated from the total carbon analysis. The ability of raw and organo-modified clays to remove phenol from aqueous solutions has been carried out as a function of contact time, pH and temperatures using a batch technique. The removal of phenol from aqueous solutions by modified clays seems to be more effective than unmodified samples. The adsorption capacity was found to increase with increasing temperature indication that the adsorptions were endothermic. The adsorption of phenol onto these clays was found to be increased by increasing of pH value and the adsorption patterns data are correlated well by Langmuir and Freundlich isotherm models and that the adsorption is physical in nature. The experimental data fitted very well with the pseudo-second-order kinetic model. The thermodynamic study of adsorption process showed that the adsorption of phenol with these six adsorbents was carried out spontaneously, and the process was endothermic in nature.

  4. Aggregation of sulfosuccinate surfactants in water

    Energy Technology Data Exchange (ETDEWEB)

    Magid, L.J.; Daus, K.A.; Butler, P.D.; Quincy, R.B.


    The aggregation of sodium di-n-alkyl sulfosuccinates in water (H/sub 2/O and D/sub 2/O at 45/sup 0/C) has been investigated. A self-consistent picture of the dependence of sodium ion binding on surfactant concentration is obtained from emf measurements, conductimetry, and small-angle neutron scattering (SANS) measurements. The concentration dependence of the micellar agregation number for the sulfosuccinates and related double-tailed surfactants depends markedly on surfactant solubility. A sphere-to-disk transition in micellar shape, which might have been expected as a precursor to formation of a lamellar mesophase, was not observed as the surfactant concentration was increased. 8 figures, 2 tables.

  5. Solid miscibility of common-anion lithium and sodium halides. Experimental determination of the region of demixing in lithium bromide + sodium bromide

    NARCIS (Netherlands)

    Oonk, H.A.J.; Wijk, H.J. van; Doornhof, D.


    The region of demixing of solid lithium bromide + sodium bromide mixtures has been measured by X-ray diffraction. The critical temperature of mixing corresponding to a thermodynamic fit of the experimental data is 513 K. Estimates are given of the regions of demixing in solid lithium chloride + sodi

  6. On the distribution of bromide and bromide/chlorinity ratios in the waters of the Arabian sea off central Indian coast

    Digital Repository Service at National Institute of Oceanography (India)

    DeSouza, F.P.; SenGupta, R.

    Water samples from surface to 2000 m depth at two stations in the Arabian Sea collected during the 82nd cruise of R V Gaveshani in November, 1980 were analysed for bromide. The average bromide concentration was 0.068 g/kg plus or minus 0...

  7. Investigation of a polyether trisiloxane surfactant


    Michel, Amandine


    Thanks to their adaptability and high efficiency compared to traditional carbon based surfactants, silicone surfactants are a success in many different applications, from pesticides to cosmetics, polyurethane foam, textile and car care products. In spite of those numerous applications, no analytical method existed for their trace determination in environmental samples and no data have been available regarding their environmental occurrence and fate. An analytical method for the trace ana...

  8. Surfactant apoprotein in nonmalignant pulmonary disorders.


    Singh, G.; Katyal, S. L.


    Formalin-fixed, paraffin-embedded lungs exhibiting a variety of nonmalignant disorders were studied by immunoperoxidase staining using antibodies specific for surfactant apoprotein, IgG, IgM, IgA, albumin, fibrinogen, and lysozyme. Normal Type II pneumocytes showed staining for surfactant apoprotein in the perinuclear region only. The extent and intensity of staining for apoprotein was markedly increased in reactive Type II pneumocytes. This increase appeared to be a nonspecific reaction to l...

  9. Use of liquid crystals for imaging different inclusion abilities of α-cyclodextrin and β-cyclodextrin toward cetyltrimethyl ammonium bromide (United States)

    Liao, Zhijian; Du, Sinan; Qin, Zhenli; Wang, Jinyan; Zuo, Fang; Luo, Jianbin


    We herein report a method for the imaging of different inclusion abilities of α-cyclodextrin (α-CD) and β-cyclodextrin (β-CD) toward cetyltrimethyl ammonium bromide (CTAB) using liquid crystals (LCs). The optical transition from the dark to the bright state was caused by the inclusion interaction between CTAB and CDs. It was confirmed that α-CD formed more stable CTAB complexes than β-CD, leading to different optical responses of the LCs from the α-CD/CTAB and β-CD/CTAB systems. This method could be used to provide a visual method for selection of the correct CD molecules for interaction with surfactant molecules in recognition systems.

  10. Micellization of dodecyltrimethylammonium bromide in water-dimethylsulfoxide mixtures: a multi-length scale approach in a model system. (United States)

    Peyre, Véronique; Bouguerra, Sabah; Testard, Fabienne


    The micellization in mixed solvent was studied using conductimetry, density measurements (molar volumes), and small angle neutron scattering (SANS) to explore dodecyltrimethylammonium bromide (DTABr) micelle formation throughout the entire composition range of water-dimethylsulfoxide (DMSO) mixtures. As the concentration of DMSO was increased in the mixture, the critical micelle concentration (CMC) increased, the aggregation number decreased and the ionization degree increased, until no aggregates could be detected any more for DMSO molar fraction higher than 0.51. The results were consistent with the presence of globular micelles interacting via a coulombic potential. The experimental CMC values and aggregation numbers were successfully reconciled with a molecular thermodynamic model describing the micellization process in solvent mixtures (R. Nagarajan and C.-C. Wang, Langmuir 16 (2000) 5242). The structural and thermodynamic characterization of the micelles agreed with the prediction of a dissymmetric solvation of the surfactant entity: the hydrocarbon chain was surrounded only by DMSO while the polar head was surrounded only by water. The decrease in the ionization degree was due to the condensation of the counterions and was definitely linked to the geometrical characteristics of the aggregates and by no means to the CMC or salinity. This multi-technique study provides new insight into the role of solvation in micellization and the reason for the decrease in ionization degree, emphasizing the dissymmetric solvation of the chain by DMSO and the head by water. This is the first time that, for a given surfactant in solvent mixtures, micellization is described using combined analysis from molecular to macroscopic scale.

  11. Evaluation of Surfactant Effects on Newborns

    Directory of Open Access Journals (Sweden)

    N. Khalessi


    Full Text Available Introduction & Objective: One of the standard therapies in neonates with severe respiratory distress syndrome (RDS is surfactant administration in early course of therapy that cause reduction in mortality, pneumothorax and need to mechanical ventilation. In this study that was carried out in Aliasghar Hospital NICU in 1994-1995 & 2001-2002, the goal was to compare two groups of neonates with severe RDS that had been ventilated in the first 24 hours but one group had received surfactant and the other group (7 years ago was deprived of this substance. Materials & Methods: In our study, 36 neonates that received surfactant and 52 neonates with only mechanical ventilation therapy were compared. Data collected and analyzed using SPSS.Results: We found that mortality in patients with surfactant administration was significantly lower compared to the second group who did not receive surfactant. There were not any significant differences in incidences of HIV, pneumothorax, sepsis, and PDA and also course of hospitalization and need to ventilation between two groups. Conclusion: As a result, all of these findings reflect obligatory surfactant administration in sever RDS in NICU under observation of an educated expert.

  12. Nonlinear water waves with soluble surfactant (United States)

    Lapham, Gary; Dowling, David; Schultz, William


    The hydrodynamic effects of surfactants have fascinated scientists for generations. This presentation describes an experimental investigation into the influence of a soluble surfactant on nonlinear capillary-gravity waves in the frequency range from 12 to 20 Hz. Waves were generated in a plexiglass wave tank (254 cm long, 30.5 cm wide, and 18 cm deep) with a triangular plunger wave maker. The tank was filled with carbon- and particulate-filtered water into which the soluble surfactant Triton-X-100® was added in known amounts. Wave slope was measured nonintrusively with a digital camera running at 225 fps by monitoring the position of light beams which passed up through the bottom of the tank, out through the wavy surface, and onto a white screen. Wave slope data were reduced to determine wave damping and the frequency content of the wave train. Both were influenced by the presence of the surfactant. Interestingly, a subharmonic wave occurring at one-sixth the paddle-driving frequency was found only when surfactant was present and the paddle was driven at amplitudes high enough to produce nonlinear waves in clean water. Although the origins of this subharmonic wave remain unclear, it appears to be a genuine manifestation of the combined effects of the surfactant and nonlinearity.

  13. Performance of some surfactants as wetting agents

    Energy Technology Data Exchange (ETDEWEB)

    Shalaby, M.N.; El-Shanny, O.A.A. [Egyptian Petroleum Research Institute (EPRI), Cairo (Egypt). Evaluation and Analysis Dept.


    The wetting power of anionic surfactant: sodium dodecyl sulfate (SDS), and nonionic surfactants: polyoxyethelene(14)monolaurate [La(EO){sub 14}] and polyoxyethelene(14)monoeleate [OI(EO){sub 14}] has been studied to determine their performance as wetting agents. The study reveals that the nonionic compound with a long hydrophobic chain exhibits higher wettability than the shorter one when used at very low cocentrations (below CMC) and the reverse is shown with high concentrations (above CMC). the wetting power of the investigated surfactants increases as the CMC values increases. In case of the nonionic compounds and at surfactant concentrations equal their CMC values, OI(EO){sub 14} shows a higher wetting power than La(EO){sub 14} while is possesses a lower HLB value. The anionic surfactant shows an optimum wetting in comparison with the tested nonionic one. The wettability of all the investigated samples increases as the surface tension of their solutions increases to the allowed limit that can be reached in the presence of surfactant. (orig.)

  14. Spinodal Decomposition in Mixtures Containing Surfactants (United States)

    Melenekvitz, J.


    Spinodal decomposition in mixtures containing two immiscible liquids (A and B) plus surfactant was investigated using a recently developed (J. Melenkevitz and S. H. Javadpour, J. Chem. Phys., 107, 623 (1997).) 3-component Ginzburg-Landau model. The time dependent Ginzburg-Landau (TDGL) equations governing the evolution of structure were numerically integrated in 2-dimensions. We found the growth rate of the average domain size, R(t), decreased with increasing surfactant concentration over a wide range of relative amounts of A and B. This can be attributed to the surfactant accumulating at the growing interface between the immiscible liquids, which leads to a reduction in the surface tension. At late times, the growth rate was noticeably altered when thermal fluctuations were added to the numerical simulations. In this case, power law behavior was observed for R(t) at late times, R(t) ~ t^α, with the exponent α decreasing as the amount of surfactant increased. The dynamics at early times were determined by linearizing the TDGL equations about a uniformly mixed state. The growth rate at ealry times was found to be strongly dependent on the model parameters describing the surfactant miscibility in A and B and the surfactant strength. Comparison with recent measurements on SBR / PB mixtures with added PB-SBR diblock copolymer will also be presented.


    Energy Technology Data Exchange (ETDEWEB)

    Kishore K. Mohanty


    There are many carbonate reservoirs in US (and the world) with light oil and fracture pressure below its minimum miscibility pressure (or reservoir may be naturally fractured). Many carbonate reservoirs are naturally fractured. Waterflooding is effective in fractured reservoirs, if the formation is water-wet. Many fractured carbonate reservoirs, however, are mixed-wet and recoveries with conventional methods are low (less than 10%). Thermal and miscible tertiary recovery techniques are not effective in these reservoirs. Surfactant flooding (or huff-n-puff) is the only hope, yet it was developed for sandstone reservoirs in the past. The goal of this research is to evaluate dilute (hence relatively inexpensive) surfactant methods for carbonate formations and identify conditions under which they can be effective. Imbibition in an originally oil-wet 2D capillary is the fastest in the case of Alf-38 and slowest in the case of DTAB (among the surfactants studied). Force of adhesion studies and contact angle measurements show that greater wettability alteration is possible with these anionic surfactants than the cationic surfactant studied. The water imbibition rate does not increase monotonically with an increase in the surfactant concentration. A numerical model has been developed that fits the rate of imbibition. Plans for the next quarter include conducting simulation and imbibition studies.

  16. Silicone antifoam performance enhancement by nonionic surfactants in potato medium. (United States)

    Christiano, Steven P; Fey, Kenneth C


    The ability of a silicone antifoam to retard foaming in a liquor prepared from potatoes is enhanced by the addition of ethoxylated nonionic surfactants. The enhancement is non-linear for surfactant concentration, with all 12 surfactants tested possessing a concentration at which foam heights strongly diminish, referred to as the surfactant critical antifoaming concentration (SCAFC). SCAFCs vary between surfactants, with lower values indicating better mass efficiency of antifoaming enhancement. SCAFCs decrease with degree of ethoxylation and decrease with the hydrophilic-lipophilic balance for ethoxylated nonionic surfactants. Surfactant addition produces a mixed water-surface layer containing surfactant and surface-active components in the potato medium. Surface tension reduction does not correlate well with antifoam performance enhancement. A model is proposed where surfactant adsorption promotes desorption of surface-active potato medium components from the water surface. At the SCAFC, desorption is not complete, yet the rate of bubble rupture is sufficiently enhanced to provide excellent foam control.

  17. Bending of the Flexible Spacer Chain of Gemini Surfactant Induced by Hydrophobic Interaction

    Institute of Scientific and Technical Information of China (English)

    YOU,Yi; JIANG,Rong; LING,Tingting; ZHAO,Jianxi


    In order to understand the special role of the flexible alkylene spacer of gemini surfactant in the self-assembly,three gemini surfactants,alkylene-α,ω-bis(didodecylmethylammonium bromide)that is designated as 2C12-s-2C12·2Br (s=3,6,8),were synthesized.When the spread films of 2C12-s-2C12·2Br on the surface of water were con-structed,they form the dense layer of the alkyl tails owing to four dodecyl chains per molecule.This induced the bending of the spacer chain toward the air-side at the s smaller than that of C12-s-C12·2Br adsorbed on the air/water interface owing to the enhanced hydrophobic interaction between the alkyl tails and the spacer chain, where C12-s-C12·2Br has only two alkyl tails per molecule. Conclusively.,the enhanced hydrophobic interaction between the alkyl tails and the spacer chain can effectively induce the bending of the latter toward the air-side.

  18. Fluidization of a dipalmitoyl phosphatidylcholine monolayer by fluorocarbon gases: potential use in lung surfactant therapy. (United States)

    Gerber, Frédéric; Krafft, Marie Pierre; Vandamme, Thierry F; Goldmann, Michel; Fontaine, Philippe


    Fluorocarbon gases (gFCs) were found to inhibit the liquid-expanded (LE)/liquid-condensed (LC) phase transition of dipalmitoyl phosphatidylcholine (DPPC) Langmuir monolayers. The formation of domains of an LC phase, which typically occurs in the LE/LC coexistence region upon compression of DPPC, is prevented when the atmosphere above the DPPC monolayer is saturated with a gFC. When contacted with gFC, the DPPC monolayer remains in the LE phase for surface pressures lower than 38 mN m(-1), as assessed by compression isotherms and fluorescence microscopy (FM). Moreover, gFCs can induce the dissolution of preexisting LC phase domains and facilitate the respreading of the DPPC molecules on the water surface, as shown by FM and grazing incidence x-ray diffraction. gFCs have thus a highly effective fluidizing effect on the DPPC monolayer. This gFC-induced fluidizing effect was compared with the fluidizing effect brought about by a mixture of unsaturated lipids and proteins, namely the two commercially available lung surfactant substitutes, Curosurf and Survanta, which are derived from porcine and bovine lung extracts, respectively. The candidate FCs were chosen among those already investigated for biomedical applications, and in particular for intravascular oxygen transport, i.e., perfluorooctyl bromide, perfluorooctylethane, bis(perfluorobutyl)ethene, perfluorodecalin, and perfluorooctane. The fluidizing effect is most effective with the linear FCs. This study suggests that FCs, whose biocompatibility is well documented, may be useful in lung surfactant substitute compositions.

  19. Synthesis and surface activities of a novel di-hydroxyl-sulfate-betaine-type zwitterionic gemini surfactants

    Energy Technology Data Exchange (ETDEWEB)

    Geng, Xiang F., E-mail: [School of Chemistry and Chemical Engineering, Southwest Petroleum University, Chengdu 610500 (China); State Key Laboratory of Oil and Gas Reservoir Geology and Exploration, Southwest Petroleum University, Chengdu 610500 (China); Hu, Xing Q.; Xia, Ji J. [School of Chemistry and Chemical Engineering, Southwest Petroleum University, Chengdu 610500 (China); State Key Laboratory of Oil and Gas Reservoir Geology and Exploration, Southwest Petroleum University, Chengdu 610500 (China); Jia, Xue C. [Institute of Resources and Environmental, Southwest Petroleum University, Chengdu 610500 (China)


    A series of novel di-hydroxyl-sulfate-betaine-type zwitterionic gemini surfactants of 1,2-bis[N-ethyl-N-(2-hydroxyl-3-sulfopropyl)-alkylammonium] alkyl betaines (DBA{sub s–n}, where s and n represent the spacer length of 2, 4 and 6 and the hydrocarbon chain length of 8, 12, 14, 16 and 18, respectively) were synthesized by reacting alkylamine with sodium 3-chloro-2-hydroxypropanesulfonate (the alternative sulphonated agent), followed by the reactions with a,ω-dibromoalkyl and then ethyl bromide. Their adsorption and aggregation properties were investigated by means of equilibrium surface tension, dynamic light-scattering (DLS) and transmission electron microscopy (TEM). DBA{sub s–n} gemini surfactants showed excellent surface activities and packed tightly at the interface. For example, the minimum CMC value for DBA{sub s–n} series was of the order of 10{sup −5} M and the surface tension of water can be decreased as low as 22.2 mN/m. It was also found that the aggregates of DBA{sub s–n} solutions were significantly dependent on their hydrocarbon chain lengths. The aggregates changed from vesicles to entangled fiber-like micelles as the chain length increased from dodecyl to tetradecyl.

  20. Synthesis and surface activities of a novel di-hydroxyl-sulfate-betaine-type zwitterionic gemini surfactants (United States)

    Geng, Xiang F.; Hu, Xing Q.; Xia, Ji J.; Jia, Xue C.


    A series of novel di-hydroxyl-sulfate-betaine-type zwitterionic gemini surfactants of 1,2-bis[N-ethyl-N-(2-hydroxyl-3-sulfopropyl)-alkylammonium] alkyl betaines (DBAs-n, where s and n represent the spacer length of 2, 4 and 6 and the hydrocarbon chain length of 8, 12, 14, 16 and 18, respectively) were synthesized by reacting alkylamine with sodium 3-chloro-2-hydroxypropanesulfonate (the alternative sulphonated agent), followed by the reactions with а,ω-dibromoalkyl and then ethyl bromide. Their adsorption and aggregation properties were investigated by means of equilibrium surface tension, dynamic light-scattering (DLS) and transmission electron microscopy (TEM). DBAs-n gemini surfactants showed excellent surface activities and packed tightly at the interface. For example, the minimum CMC value for DBAs-n series was of the order of 10-5 M and the surface tension of water can be decreased as low as 22.2 mN/m. It was also found that the aggregates of DBAs-n solutions were significantly dependent on their hydrocarbon chain lengths. The aggregates changed from vesicles to entangled fiber-like micelles as the chain length increased from dodecyl to tetradecyl.