WorldWideScience

Sample records for surfactant concentration profiles

  1. Effects of Concentration and Conformation of Surfactants on Phase Separation of Surfactant-Water-Oil Systems

    Institute of Scientific and Technical Information of China (English)

    袁银权; 邹宪武; 刘昊阳

    2004-01-01

    The effects of surfactants on the phase separation of surfactant-water-oil systems have been investigated by using discontinuous molecular dynamic simulations. The phase separation speed and equilibrium configuration are dependent on the surfactant concentration and conformation. The equilibrium concentration of surfactants at the interface remains constant. With the increasing surfactant concentration, the equilibrium configuration crosses over from the disperse phase to the bicontinuous one. The crossover concentration is estimated. The conformation of the surfactant has little effect on the equilibrium concentration of surfactants at the interface,while it affects the equilibrium configuration after phase separation.

  2. Influence of surfactant concentration on nanohydroxyapatite growth

    Indian Academy of Sciences (India)

    D Gopi; J Indira; S Nithiya; L Kavitha; U Kamachi Mudali; K Kanimozhi

    2013-10-01

    Nanohydroxyapatite particles with different morphologies were synthesized through a microwave coupled hydrothermal method using CTAB as a template. A successful synthesis of nanosized HAP spheres, rods and fibres is achieved through this method by controlling the concentration of the surfactant. The concentration of the surfactant was tuned in such a way that the desired HAP nanostructures were obtained. The resultant powders were sintered at 900 °C in order to obtain phase pure HAP particles. The results obtained by Fourier transform infrared spectroscopy (FT–IR), X-ray diffraction analysis (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques have substantiated the formation of nanosized HAP spheres and fibres.

  3. High Oxygen Concentrations Adversely Affect the Performance of Pulmonary Surfactant.

    Science.gov (United States)

    Smallwood, Craig D; Boloori-Zadeh, Parnian; Silva, Maricris R; Gouldstone, Andrew

    2017-08-01

    Although effective in the neonatal population, exogenous pulmonary surfactant has not demonstrated a benefit in pediatric and adult subjects with hypoxic lung injury despite a sound physiologic rationale. Importantly, neonatal surfactant replacement therapy is administered in conjunction with low fractional FIO2 while pediatric/adult therapy is administered with high FIO2 . We suspected a connection between FIO2 and surfactant performance. Therefore, we sought to assess a possible mechanism by which the activity of pulmonary surfactant is adversely affected by direct oxygen exposure in in vitro experiments. The mechanical performance of pulmonary surfactant was evaluated using 2 methods. First, Langmuir-Wilhelmy balance was utilized to study the reduction in surface area (δA) of surfactant to achieve a low bound value of surface tension after repeated compression and expansion cycles. Second, dynamic light scattering was utilized to measure the size of pulmonary surfactant particles in aqueous suspension. For both experiments, comparisons were made between surfactant exposed to 21% and 100% oxygen. The δA of surfactant was 21.1 ± 2.0% and 35.8 ± 2.0% during exposure to 21% and 100% oxygen, respectively (P = .02). Furthermore, dynamic light-scattering experiments revealed a micelle diameter of 336.0 ± 12.5 μm and 280.2 ± 11.0 μm in 21% and 100% oxygen, respectively (P < .001), corresponding to a ∼16% decrease in micelle diameter following exposure to 100% oxygen. The characteristics of pulmonary surfactant were adversely affected by short-term exposure to oxygen. Specifically, surface tension studies revealed that short-term exposure of surfactant film to high concentrations of oxygen expedited the frangibility of pulmonary surfactant, as shown with the δA. This suggests that reductions in pulmonary compliance and associated adverse effects could begin to take effect in a very short period of time. If these findings can be demonstrated in vivo, a role for

  4. Effective Surfactants Blend Concentration Determination for O/W Emulsion Stabilization by Two Nonionic Surfactants by Simple Linear Regression

    National Research Council Canada - National Science Library

    Hassan, A K

    2015-01-01

    ...°. Applying the simple linear regression least squares method statistical analysis to the temperature-conductivity obtained data determines the effective surfactants blend concentration required...

  5. O/W emulsions stabilised by both low molecular weight surfactants and colloidal particles: The effect of surfactant type and concentration.

    Science.gov (United States)

    Pichot, R; Spyropoulos, F; Norton, I T

    2010-12-01

    The stability against coalescence of O/W emulsions in the presence of both surfactants and colloidal particles was investigated. In particular the effect of the surfactant type and concentration in these emulsifier mixtures on the O/W emulsions' stability was studied. Two types of surfactants were selected; those that have the ability to stabilise O/W emulsions on their own (O/W surfactants) and those that cannot (W/O surfactants). Tween 60 and Sodium Caseinate were selected as the O/W surfactants and lecithin as the W/O surfactant. Oil-in-water emulsions prepared with both particles and any of the three surfactants were stable against coalescence but, depending on the type of surfactant, the behaviour of the systems was found to depend on surfactant concentration. The droplet sizes of emulsions stabilised by mixed emulsifier systems containing low concentrations of O/W surfactants (Tween 60 or Sodium Caseinate) were smaller than those solely stabilised by either the surfactant or particles alone. At intermediate O/W surfactants concentrations, the droplet sizes of the emulsions increased. Further increases in the O/W surfactants' concentration, resulted in the complete removal of particles from the interface with the system now behaving as a surfactant-only stabilised emulsion. The behaviour of emulsions stabilised by emulsifier mixtures containing W/O surfactants was not dependent on the concentration of surfactant: no removal of particles was observed. Copyright © 2010 Elsevier Inc. All rights reserved.

  6. The effect of surfactant and solid phase concentration on drug aggregates in model aerosol propellent suspensions.

    Science.gov (United States)

    Bower, C; Washington, C; Purewal, T S

    1996-04-01

    The effect of increasing solid phase concentration on the morphology and flocculation rate of model aerosol suspensions has been investigated. Suspensions of micronized salbutamol sulphate and lactose in trichlorotrifluoroethane (P113) were studied under conditions of increasing shear stress. By use of image analysis techniques, measurement of aggregate size, fractal dimension and rate of aggregation was performed. The effect of the surfactant sorbitan monooleate on morphology and flocculation rate was also studied. Increased solid phase concentration caused an increase in the rate of aggregation and average aggregate size at a given value of shear stress. Surfactant addition retarded the aggregation rate, and caused a shift from a diffusion-limited cluster aggregation to a reaction-limited cluster aggregation mechanism. The aggregate profiles showed a corresponding change from rugged and crenellated without surfactant, to increasingly smooth and Euclidian with increasing surfactant concentration. The morphological changes were characterized by a decrease in the average boundary fractal dimension which also correlated well with the corresponding reduction in aggregation rate.

  7. Influence of water concentrations on the phase transformation of a model surfactant/co-surfactant/water system

    Science.gov (United States)

    Lunkad, Raju; Srivastava, Arpita; Debnath, Ananya

    2017-02-01

    The influence of water concentrations on phase transformations of a surfactant/co-surfactant/water system is investigated by using all atom molecular dynamics simulations. At higher water concentrations, where surfactant (behenyl trimethyl ammonium chloride, BTMAC) to co-surfactant (stearyl alcohol, SA) ratio is fixed, BTMAC and SA self-assemble into spherical micelles, which transform into strongly interdigitated one dimensional rippled lamellar phases upon decreasing water concentrations. Fragmentation or fusions of spherical micelles of different sizes are evident from the radial distribution functions at different temperatures. However, at lower water concentrations rippled lamellar phase transforms into an LβI phase upon heating. Our simulations reveal that the concentrations of water can influence available space around the head groups which couple with critical thickness to accommodate the packing fraction required for respective phases. This directs towards obtaining a controlling factor to design desired phases important for industrial and medical applications in the future.

  8. Effects of concentration, head group, and structure of surfactants on the degradation of phenanthrene

    Energy Technology Data Exchange (ETDEWEB)

    Jin Danyue; Jiang Xia [State Environmental Protect Key Laboratory of Lake Eutrophication Control, Research Center of Lake Environment, Chinese Research Academy of Environmental Science, No. 8 Dayangfang, An Wai Bei Yuan, Beijing 100012 (China)]. E-mail: jiangxia@craes.org.cn; Jing Xin [State Environmental Protect Agency of China (China); Ou Ziqing [Institute of Applied Ecology, Chinese Academy of Science, Shenyang 110016 (China)

    2007-06-01

    The effects of concentration, polar/ionic head group, and structure of surfactants on the biodegradation of polycyclic aromatic hydrocarbons (PAHs) in the aqueous phase, as well as their effects on the bacterial activity were investigated. The toxicity ranking of studied surfactants is: non-ionic surfactants (Tween 80, Brij30, 10LE and Brij35) < anionic surfactants (LAS) < cationic surfactants (TDTMA). For the same head group and similar molecular structure, the toxicity to the bacteria is due to the chain length, in which the toxicity becomes lower as the chain length increases. The bacterial growth increased slightly when phenanthrene and LAS ({<=}10 mg L{sup -1}) served the sole carbon and energy resource. However, the degradation of {sup 14}C-phenanthrene showed either a decrease or no obvious change with the surfactants present at all tested concentrations (5-40 mg L{sup -1}). Thus, the surfactant addition is not beneficial to the removal of phenanthrene or other PAH contaminants due presumably to the preferential utilization of surfactants at low levels as the non-toxic nutrient resource and to the high toxicity of the surfactants at high levels to the microorganism activity. Biodegradation of phenanthrene was also influenced by the surfactant concentration, head group type, and structure. Much more research has yet to be completed on the use of surfactants for soil remediation due to the surfactant toxicity or biodegradation effect.

  9. An Unusual Variation of Surface Tension with Concentration of.Mixed Cationic-anionic Surfactants

    Institute of Scientific and Technical Information of China (English)

    肖进新; 暴艳霞

    2001-01-01

    There are two platforms in the surface tension vs. concentration curve (γ-lgC curve) of cationic-anionic surfactant mixtures. The first platform is the same as that of common surfactant solution, and the cross point is the CMC. After the CMC, the mixtures form precipitate. At higher concentration, the mixtures form homogeneous sloution.When the mixtures form homogeneous solution at high concentration. surface tension increases with concentration, the becomes constant.So the γ-lgC curve exhibits the second platform. The surface tension at the second platform increases by increasing molar ratio of two surfactants and polar group size of surfactants, and decreases with adding inorganic salts.

  10. The binding and insertion of imidazolium-based ionic surfactants into lipid bilayers: the effects of the surfactant size and salt concentration.

    Science.gov (United States)

    Lee, Hwankyu; Jeon, Tae-Joon

    2015-02-28

    Imidazolium-based ionic surfactants with hydrocarbon tails of different sizes were simulated with lipid bilayers at different salt concentrations. Starting with the random position of ionic surfactants outside the bilayer, surfactants with long tails mostly insert into the bilayer, while those with short tails show the insertion of fewer surfactant molecules, indicating the effect of the tail length. In particular, surfactants with a tail of two or four hydrocarbons insert and reversibly detach from the bilayer, while the inserted longer surfactants cannot be reversibly detached because of the strong hydrophobic interaction with lipid tails, in quantitative agreement with experiments. Longer surfactants insert more deeply and irreversibly into the bilayer and thus increase lateral diffusivities of the bilayer, indicating that longer surfactants more significantly disorder lipid bilayers, which also agrees with experiments regarding the effect of the tail length of ionic surfactants on membrane permeability and toxicity. Addition of NaCl ions weakens the electrostatic interactions between headgroups of surfactants and lipids, leading to the binding of fewer surfactants into the bilayer. In particular, our simulation findings indicate that insertion of ionic surfactants can be initiated by either the hydrophobic interaction between tails of surfactants and lipids or the electrostatic binding between imidazolium heads and lipid heads, and the strength of hydrophobic and electrostatic interactions depends on the tail length of surfactants.

  11. Effective Surfactants Blend Concentration Determination for O/W Emulsion Stabilization by Two Nonionic Surfactants by Simple Linear Regression.

    Science.gov (United States)

    Hassan, A K

    2015-01-01

    In this work, O/W emulsion sets were prepared by using different concentrations of two nonionic surfactants. The two surfactants, tween 80(HLB=15.0) and span 80(HLB=4.3) were used in a fixed proportions equal to 0.55:0.45 respectively. HLB value of the surfactants blends were fixed at 10.185. The surfactants blend concentration is starting from 3% up to 19%. For each O/W emulsion set the conductivity was measured at room temperature (25±2°), 40, 50, 60, 70 and 80°. Applying the simple linear regression least squares method statistical analysis to the temperature-conductivity obtained data determines the effective surfactants blend concentration required for preparing the most stable O/W emulsion. These results were confirmed by applying the physical stability centrifugation testing and the phase inversion temperature range measurements. The results indicated that, the relation which represents the most stable O/W emulsion has the strongest direct linear relationship between temperature and conductivity. This relationship is linear up to 80°. This work proves that, the most stable O/W emulsion is determined via the determination of the maximum R² value by applying of the simple linear regression least squares method to the temperature-conductivity obtained data up to 80°, in addition to, the true maximum slope is represented by the equation which has the maximum R² value. Because the conditions would be changed in a more complex formulation, the method of the determination of the effective surfactants blend concentration was verified by applying it for more complex formulations of 2% O/W miconazole nitrate cream and the results indicate its reproducibility.

  12. Aerobic biodegradation of amphoteric amine-oxide-based surfactants: Effect of molecular structure, initial surfactant concentration and pH.

    Science.gov (United States)

    Ríos, Francisco; Lechuga, Manuela; Fernández-Serrano, Mercedes; Fernández-Arteaga, Alejandro

    2017-03-01

    The present study was designed to provide information regarding the effect of the molecular structure of amphoteric amine-oxide-based surfactants and the initial surfactant concentration on their ultimate biodegradation. Moreover, given this parameter's pH-dependence, the effect of pH was also investigated. Three amine-oxide-based surfactants with structural differences in their hydrophobic alkyl chain were tested: Lauramine oxide (AO-R12), Myristamine oxide (AO-R14) and Cocamidopropylamine oxide (AO-Cocoamido). We studied the ultimate biodegradation using the Modified OECD Screening Test at initial surfactant concentrations ranged from 5 to 75 mg L(-1) and at pH levels from 5 to 7.4. The results demonstrate that at pH 7.4, amine-oxide-based surfactants are readily biodegradable. In this study, we concluded that ω-oxidation can be assumed to be the main biodegradation pathway of amine-oxides and that differences in the biodegradability between them can be explained by the presence of an amide group in the alkyl chain of AO-Cocoamido; the CN fission of the amide group slows down their mineralization process. In addition, the increase in the concentration of the surfactant from 5 to 75 mg L(-1) resulted in an increase in the final biodegradation of AO-R12 and AO-R14. However, in the case of AO-Cocoamido, a clear relationship between the concentration and biodegradation cannot be stated. Conversely, the biodegradability of AO-R12 and AO-R14 was considerably lower in an acid condition than at a pH of 7.4, whereas AO-Cocoamido reached similar percentages in acid conditions and at a neutral pH. However, microorganisms required more time to acclimate.

  13. Dependence of the solubility of atmospheric oxygen in weakly alkaline aqueous solutions on surfactant concentration

    Science.gov (United States)

    Chistyakova, G. V.; Koksharov, S. A.; Vladimirova, T. V.

    2012-11-01

    The solubility of atmospheric oxygen in solutions of surfactants of different natures at 293 K and pH 8 is determined by gas chromatography. It is found that additives of nonionic surfactants decrease the oxygen content in the solution in the premicellar region and increase its solubility in the micellar region. It is shown that, for anionic surfactants, a decrease in the solubility of O2 is observed over the entire concentration range.

  14. Effect of low concentrations of synthetic surfactants on polycyclic aromatic hydrocarbons (PAH) biodegradation

    OpenAIRE

    A. C. Rodrigues; Nogueira, R; Melo, L. F.; A. G. Brito

    2013-01-01

    The present study is focused on the effect of synthetic surfactants, at low concentration, on the kinetics of polycyclic aromatic hydrocarbons (PAH) biodegradation by Pseudomonas putida ATCC 17514 and addresses the specific issue of the effect of the surfactant on bacterial adhesion to PAH, which is believed to be an important mechanism for the uptake of hydrophobic compounds. For that purpose, three surfactants were tested, namely, the nonionic Tween 20, the anionic sodium dodecyl sulphate (...

  15. (NLC-Effect of Surfactant Concentration on the Formulation Properties

    Directory of Open Access Journals (Sweden)

    Akram Pezeshki

    2014-12-01

    Conclusion: This study suggests that surfactant significantly influences the final product properties. Our findings may pave the way of researchers to focus on fortifying the beverages with various lipophilic nutraceuticals.

  16. The Effect of Surfactant on Synthesis of ZSM-5 in a Super-Concentrated System

    Institute of Scientific and Technical Information of China (English)

    Li Haiyan; Qin Lihong; Gao Guangbo; Sun Famin

    2016-01-01

    ZSM-5 zeolite was synthesized in a super-concentrated system using different kinds of surfactants. The ZSM-5 samples were characterized by XRD, SEM, FT-IR and BET techniques. The surfactant could change the properties of ZSM-5 zeolite, including the crystallinity, the crystal grain size, the surface area, the pore volume and the Si/Al mole ratio.

  17. Determination of the critical micelle concentration in simulations of surfactant systems

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Andrew P.; Panagiotopoulos, Athanassios Z., E-mail: azp@princeton.edu [Department of Chemical and Biological Engineering, Princeton University, Princeton, New Jersey 08544 (United States)

    2016-01-28

    Alternative methods for determining the critical micelle concentration (cmc) are investigated using canonical and grand canonical Monte Carlo simulations of a lattice surfactant model. A common measure of the cmc is the “free” (unassociated) surfactant concentration in the presence of micellar aggregates. Many prior simulations of micellizing systems have observed a decrease in the free surfactant concentration with overall surfactant loading for both ionic and nonionic surfactants, contrary to theoretical expectations from mass-action models of aggregation. In the present study, we investigate a simple lattice nonionic surfactant model in implicit solvent, for which highly reproducible simulations are possible in both the canonical (NVT) and grand canonical (μVT) ensembles. We confirm the previously observed decrease of free surfactant concentration at higher overall loadings and propose an algorithm for the precise calculation of the excluded volume and effective concentration of unassociated surfactant molecules in the accessible volume of the solution. We find that the cmc can be obtained by correcting the free surfactant concentration for volume exclusion effects resulting from the presence of micellar aggregates. We also develop an improved method for determination of the cmc based on the maximum in curvature for the osmotic pressure curve determined from μVT simulations. Excellent agreement in cmc and other micellar properties between NVT and μVT simulations of different system sizes is observed. The methodological developments in this work are broadly applicable to simulations of aggregating systems using any type of surfactant model (atomistic/coarse grained) or solvent description (explicit/implicit)

  18. Thermodynamically consistent description of the hydrodynamics of free surfaces covered by insoluble surfactants of high concentration

    OpenAIRE

    Thiele, Uwe; Archer, Andrew J.; Plapp, Mathis

    2012-01-01

    In this paper we propose several models that describe the dynamics of liquid films which are covered by a high concentration layer of insoluble surfactant. First, we briefly review the 'classical' hydrodynamic form of the coupled evolution equations for the film height and surfactant concentration that are well established for small concentrations. Then we re-formulate the basic model as a gradient dynamics based on an underlying free energy functional that accounts for wettability and capill...

  19. Effect of concentration on surfactant micelle shapes--A molecular dynamics study

    Institute of Scientific and Technical Information of China (English)

    GAO Jian; GE Wei; LI Jinghai

    2005-01-01

    Many aspects of the behavior of surfactants have not been well understood due to the coupling of many different mechanisms. Computer simulation is, therefore, attractive in the sense that it can explore the effect of different mechanisms separately. In this paper, the shapes, structures and sizes of sodium dodecylbenzenesulfonate (SDBS) micelles under different concentrations in an oil/water mixture were studied via molecular dynamics (MD) simulations using a simplified atomistic model which basically maintains the hydrophile and lipophile properties of the surfactant molecules. Above the critical micellar concentration (cmc), surfactant molecules aggregate spontaneously to form a wide variety of assemblies, from spherical to rodlike, wormlike and bilayer micelles. Changes in their ratios of the principle moments of inertia (g1/g3, g2/g3) indicated the transition of micelle shapes at different concentrations. The aggregation number of micelle is found to have a power-law dependence on surfactant concentration.

  20. Transport of Fluorescently Labeled Hydroxyapatite Nanoparticles in Saturated Granular Media at Environmentally Relevant Concentrations of Surfactants

    Science.gov (United States)

    Little is known about the mobility of engineered nanoparticles (ENPs) in granular media at environmentally relevant concentration of surfactant, which represents a critical knowledge gap in employing ENPs for in-situ remediation of contaminated groundwater. In this study, transpo...

  1. Surfactants and Sterols Concentrations in the Surface Microlayer of the Estuarine Areas of Selangor River, Malaysia

    Science.gov (United States)

    Latif, M. T.; Alsalahi, M. A.; Ali, M. M.; Dominick, D.; Khan, M. F.; Wahid, N. B. A.; Mustaffa, N. I. H.

    2016-02-01

    This study aims to determine the concentration of surfactant and sterols as biomarkers in the surface microlayer (SML) in estuarine areas of the Selangor River, Malaysia. SML samples were collected during different seasons using a rotation drum method. The compositions of surfactants were determined as methylene blue active substances (MBAS) and disulphine blue active substances (DBAS) as anionic and cationic surfactants respectively. The concentration of sterols was determined using a gas chromatography equipped with a flame ionization detector (GC-FID). The results show that the concentrations of surfactants around the estuarine area were dominated by anionic surfactants (MBAS) with average concentrations of 0.39 µmol L-1. .The concentrations of total sterols in the SML ranged from 107.06 to 505.55 ng L-1. The surfactants and total sterol concentrations were found to be higher in the wet season compare to dry season. Cholesterol was found to be the most abundant sterols component in the SML of the Selangor River. The diagnostic ratios of sterols show the influence of natural sources and waste on the contribution of sterols in the SML. Further analysis, using principal component analysis (PCA), showed distinct inputs of sterols derived from human activity (40.58%), terrigenous and plant inputs (22.59%) as well as phytoplankton and marine inputs (17.35%).

  2. Thermodynamically consistent description of the hydrodynamics of free surfaces covered by insoluble surfactants of high concentration

    CERN Document Server

    Thiele, Uwe; Plapp, Mathis

    2012-01-01

    In this paper we propose several models that describe the dynamics of liquid films which are covered by a high concentration layer of insoluble surfactant. First, we briefly review the 'classical' hydrodynamic form of the coupled evolution equations for the film height and surfactant concentration that are well established for small concentrations. Then we re-formulate the basic model as a gradient dynamics based on an underlying free energy functional that accounts for wettability and capillarity. Based on this re-formulation in the framework of nonequilibrium thermodynamics, we propose extensions of the basic hydrodynamic model that account for (i) nonlinear equations of state, (ii) surfactant-dependent wettability, (iii) surfactant phase transitions, and (iv) substrate-mediated condensation. In passing, we discuss important differences to most of the models found in the literature.

  3. Separating excess surfactant from silver and gold nanoparticles in micellar concentrates by means of nonaqueous electrophoresis

    Science.gov (United States)

    Bulavchenko, A. I.; Demidova, M. G.; Popovetskiy, P. S.; Podlipskaya, T. Yu.; Plyusnin, P. E.

    2017-08-01

    It is shown by physicochemical means (IR Fourier spectroscopy, CHN-analysis with preliminary sorption of surfactant on SiO2) that the content of sodium bis(2-ethylhexyl)sulfosuccinate (AOT) in an electrophoretic concentrate remains unchanged during the electrophoretic concentration of silver and gold nanoparticles. Diluting the concentrate and carrying out the second stage of electrophoresis reduces the concentration of surfactant from 0.25 to 0.015 M while maintaining the mass concentration of nanoparticles. Nanoparticles in organosols before and after electrophoresis are characterized by means of photon correlation spectroscopy, phase analysis light scattering, and spectrophotometry. Conducting films on glass substrates are obtained from concentrates with a different contents of surfactant via water-alcohol treatment and thermolysis.

  4. Research on the Influence of the Type of Surfactant and Concentrator in Aqueous Dispersion of Pigments.

    Science.gov (United States)

    Makarewicz, Edwin; Michalik, Agnieszka

    2014-01-01

    This work reports tests performed to evaluate the stability of aqueous dispersions of inorganic oxide pigments with different specific surface areas, with the use of anionic and non-ionic surfactants and concentrators. Color mixtures of oxide compounds of blue, green, olive and brown with the unit cell spinel structure were used as pigments. The sodium salt of sulfosuccinic acid monoester, oxyethylenated nonylphenol and ethoxylated derivatives of lauryl alcohol, fatty alcohol and fatty amine were used as surfactants. The concentrators used were: poly(vinyl alcohol), the sodium salt of carboxymethyl cellulose as well as a water-based polyurethane oligomer. The highest dispersion efficiency was found for dispersed systems in which surfactant and concentrator were incorporated in the formula. The one containing the sodium salt of carboxymethyl cellulose or polyurethane oligomer with ethoxylated saturated fatty alcohol or fatty amine was found to be the most efficient. It was discovered that a higher dispersion efficiency corresponds to pigments with larger specific surface. The efficiency is also found to improve when the concentrator is an acrylic polymer or copolymer made up of two acrylic species. In this case, the concentrator interaction with the surfactant is more effective if the value of its boundary viscosity number is higher. This observation confirms the existence of interactions between macro-chains of the concentrator and surfactant molecules forming micelles with the pigment particles.

  5. Competitive solubilization of phenol by cationic surfactant micelles in the range of low additive and surfactant concentrations.

    Science.gov (United States)

    Chaghi, Radhouane; de Ménorval, Louis-Charles; Charnay, Clarence; Derrien, Gaëlle; Zajac, Jerzy

    2009-05-01

    Competitive interactions of phenol (PhOH) with micellar aggregates of hexadecyltrimethylammonium bromide (HTAB) against 1-butanol (BuOH) in aqueous solutions at surfactant concentrations close to the critical micelle concentration (CMC), BuOH concentration of 0.5 mmol kg(-1), and phenol contents of 1, 5, or 10 mmol kg(-1) have been investigated at 303 K by means of (1)H NMR spectroscopy, titration calorimetry, and solution conductimetry. The solubilization loci for phenol were deduced from the composition-dependence of the (1)H chemical shifts assigned to various protons in the surfactant and additive units. Since in pure HTAB solutions phenol is already in competition with Br(-), addition of 1 mmol kg(-1) NaBr to the system weakens the phenol competitiveness. The presence of butanol in the HTAB micelles causes phenol to penetrate deeper toward the hydrophobic micelle core. For higher phenol contents, the butanol molecules are constrained to remain in the bulk solution and are progressively replaced within the HTAB micelles by the aromatic units. The competitive character of phenol solubilization against butanol is well supported by changes in the thermodynamic parameters of HTAB micellization in the presence of both of the additives.

  6. Microwave corneosurfametry and the short-duration dansyl chloride extraction test for rating concentrated irritant surfactants.

    Science.gov (United States)

    Goffin, V; Piérard, G E

    2001-01-01

    There are ethical concerns to conduct in vivo tests in the animal and human to provide evidence that cosmetics and other topical products are safe. To compare two methods, namely the short-duration dansyl chloride extraction test and the microwave corneosurfametry bioassay, to test the irritation potential of concentrated surfactant systems. Five surfactants and water were tested using the in vivo test and the bioassay. A significant linear correlation was found between data yielded by the two procedures. The short-duration dansyl chloride extraction test and the microwave corneosurfametry bioassay provide similar information. The latter has the advantage of being safe.

  7. Solubilization of octane in cationic surfactant-anionic polymer complexes: effect of polymer concentration and temperature.

    Science.gov (United States)

    Zhang, Hui; Deng, Lingli; Zeeb, Benjamin; Weiss, Jochen

    2015-07-15

    Polymers may alter the ability of oppositely charged surfactant micelles to solubilize hydrophobic molecules depending on surfactant-polymer interactions. This study was conducted to investigate the effects of polymer concentration and temperature on the solubilization thermodynamics of an octane oil-in-water emulsion in mixtures of an anionic polymer (carboxymethyl cellulose) and cationic cetyltrimethylammonium bromide (CTAB) surfactant micelles using isothermal titration calorimetry (ITC). Results showed that the CTAB binding capacity of carboxymethyl cellulose increased with increasing temperature from 301 to 323 K, and correspondingly the thermodynamic behavior of octane solubilization in CTAB micelles, either in the absence or presence of polymer, was found to depend on temperature. The addition of carboxymethyl cellulose caused the solubilization in CTAB micelles to be less endothermic, and increased the solubilization capacity. Based on the phase separation model, the solubilization was suggested to be mainly driven by enthalpy gains. Results suggest that increasing concentrations of the anionic polymer gave rise to a larger Gibbs energy decrease and a larger unfavorable entropy increase for octane solubilization in cationic surfactant micelles.

  8. Re-entrant phase behavior of a concentrated anionic surfactant system with strongly binding counterions.

    Science.gov (United States)

    Ghosh, Sajal Kumar; Rathee, Vikram; Krishnaswamy, Rema; Raghunathan, V A; Sood, A K

    2009-08-04

    The phase behavior of the anionic surfactant sodium dodecyl sulfate (SDS) in the presence of the strongly binding counterion p-toluidine hydrochloride (PTHC) has been examined using small-angle X-ray diffraction and polarizing microscopy. A hexagonal-to-lamellar transition on varying the PTHC to SDS molar ratio (alpha) occurs through a nematic phase of rodlike micelles (Nc) --> isotropic (I) --> nematic of disklike micelles (N(D)) at a fixed surfactant concentration (phi). The lamellar phase is found to coexist with an isotropic phase (I') over a large region of the phase diagram. Deuterium nuclear magnetic resonance investigations of the phase behavior at phi = 0.4 confirm the transition from N(C) to N(D) on varying alpha. The viscoelastic and flow behaviors of the different phases were examined. A decrease in the steady shear viscosity across the different phases with increasing alpha suggests a decrease in the aspect ratio of the micellar aggregates. From the transient shear stress response of the N() and N(D) nematic phases in step shear experiments, they were characterized to be tumbling and flow aligning, respectively. Our studies reveal that by tuning the morphology of the surfactant micelles strongly binding counterions modify the phase behavior and rheological properties of concentrated surfactant solutions.

  9. Effect of Surfactant Concentration in the Emulsions on the Process of Oleophilic Porous Structures Imbibition

    Directory of Open Access Journals (Sweden)

    Shtyka Olga S.

    2016-01-01

    Full Text Available The spontaneous imbibition has been a subject of the scientific interest being a background process for numerous industrial technologies and occurring in the natural environment. In literature the experimental and theoretical results regarding this phenomenon describe a media imbibition with single-phase liquids and the relation between the process rate and media characteristics. The imbibition of oleophilic porous structures with two-phase liquids, only one phase of which was wetting, is an objective of the current publication. The main purpose is to estimate the influence of both surfactant fraction and the dispersed phase concentration on the mentioned process. The imbibition rate was investigated during model experiments with stabilized oil-in-water emulsions having the dispersed phase concentrations of 10 vol%, 30 vol% and 50 vol%. The prepared emulsions differed with fraction of the added surfactant, i.e. 1 vol%, 2 vol% and 5 vol%. The obtained results allowed to conclude that at the him≥0.02 m, the dispersed phase concentration and viscosity decreased versus height. However, the raise of the surfactant fraction caused the increase of mass and height of the imbibed emulsions in porous medium. Moreover, this provided increasing of viscosity and a change of emulsions behaviour as a liquid.

  10. Formation at low surfactant concentrations and characterization of mesoporous MCM-41

    Institute of Scientific and Technical Information of China (English)

    陈晓银; 丁国忠; 陈海鹰; 李全芝

    1997-01-01

    At low concentrations of cetyltrimethylammonium bromide,all silica-based mesoporous materials with hexagonal phase have been synthesized via interactions between self-assembled surfactant molecule aggregates and aniomc silicate polymers.The resulting materials are characterized by XRD,FT-IR,solid state 29Si MAS NMR,thermal analysis and N2 adsorption-desorption measurements.After soluble ions are removed,the interactors between surfactant micelles and silicate polymers are reorganized and then form mesostructures 1 he hexagonal framework is sonsistent with amorphous silica gel.The structures of materials depend on the synthesis conditions Hydrothermal process improves the interactions between molecules and increases the degree of framework silicon atom polymerization The.surface area and the mesopore volume of the material prepared at 100℃ increase by 87% and 71 %,respectively,compared with those obtained at room temperature.

  11. Concentrations of surfactants and sterols in the surface microlayer of the estuarine areas of Selangor River, Malaysia

    Science.gov (United States)

    Alsalahi, Murad Ali; Talib Latif, Mohd; Mohd Ali, Masni; Dominick, Doreena; Firoz Khan, Md; Bahiyah Abd Wahid, Nurul; Ili Hamizah Mustaffa, Nur

    2016-04-01

    This study determined the concentration of surfactant and sterols as biomarkers in the surface microlayer (SML) in estuarine areas of the Selangor River, Malaysia. SML samples were collected during different seasons using a rotation drum method. The compositions of surfactants in SML were determined as methylene blue active substances (MBAS) and disulphine blue active substances (DBAS) as anionic and cationic surfactants respectively. The concentration of sterols was determined using a gas chromatography equipped with a flame ionisation detector (GC-FID). The results show that the concentrations of surfactants around the estuarine area were dominated by anionic surfactants (MBAS) with average concentrations of 0.39 μmol L-1. The concentrations of total sterols in the SML ranged from 107.06 to 505.55 ng L-1. The surfactants and total sterol concentrations were found to be higher in the wet season. Cholesterol was found to be the most abundant sterols component in the SML of the Selangor River. The diagnostic ratios of sterols show the influence of natural sources and waste on the contribution of sterols in the SML. Further analysis, using principal component analysis (PCA), showed distinct inputs of sterols derived from human activity (40.58%), terrigenous and plant inputs (22.59%) as well as phytoplankton and marine inputs (17.35%).

  12. Critical micelle concentration of surfactants in aqueous buffered and unbuffered systems

    Energy Technology Data Exchange (ETDEWEB)

    Fuguet, Elisabet [Departament de Quimica Analitica, Universitat de Barcelona, Facultat de Quimica, Marti i Franques 1-11, 08028 Barcelona (Spain); Rafols, Clara [Departament de Quimica Analitica, Universitat de Barcelona, Facultat de Quimica, Marti i Franques 1-11, 08028 Barcelona (Spain); Roses, Marti [Departament de Quimica Analitica, Universitat de Barcelona, Facultat de Quimica, Marti i Franques 1-11, 08028 Barcelona (Spain); Bosch, Elisabeth [Departament de Quimica Analitica, Universitat de Barcelona, Facultat de Quimica, Marti i Franques 1-11, 08028 Barcelona (Spain)]. E-mail: e.bosch@ub.edu

    2005-08-29

    Critical micelle concentration (CMC) of sodium dodecyl sulphate (SDS), lithium perfluorooctanesulfonate (LPFOS), hexadecyltrimethylammonium bromide (HTAB), tetradecyltrimethylammonium bromide (TTAB), and sodium cholate (SC), surfactants commonly used as pseudostationary phases in micellar electrokinetic chromatography (MEKC), have been determined by means of three different methods: MEKC, spectrophotometry, and conductometry. Determinations have been performed in water, and also in different concentrations of phosphate buffer at pH 7.0. CMC values ranging from 8.08 (water) to 1.99 (50 mM phosphate buffer) mM for SDS, from 7.16 (water) to 2,81 (30 mM phosphate buffer) mM for LPFOS, from 3.77 (water) to 1.93 (20 mM phosphate buffer) mM for TTAB, from 0.91 (water) to {approx}0.34 (20 mM phosphate buffer) for HTAB, and around 13 mM (20 mM phosphate buffer) for SC, are obtained. The effect of the electrolyte concentration on the CMC, as well as the linear relationship between the electrolyte counter-ion concentration and the CMC are discussed. This linear relationship provides an easy way for users to estimate the CMC of a MEKC system, at a given electrolyte concentration. A comparison between experimental methods, as well as a discussion about the suitability of a given method for the determination of the CMC for a given surfactant system is also provided.

  13. Rape phosphatide concentrate in the technologies of surfactants production by the Actinobacteria

    Directory of Open Access Journals (Sweden)

    N. Koretska

    2015-05-01

    Full Text Available Introduction. Due to the fact that the production of microbial surfactants is limited by the low yield of end products and high cost of processes, the actual task is to optimize and reduce the cost of the technology of biosurfactants synthesis. One of the solutions of this problem is to use the industrial wastes, including rape phosphatide concentrate (PC. Materials and methods. Hexadecane and rape phosphatide concentrate (2% were used as a carbon source in a nutrient medium for the cultivation of bacteria. Lipids were extracted from a cell mass and supernatant by the mixture of chloroform-methanol 2:1. The qualitative analysis of metabolites was performed by a thin layer chromatography. Results and discussion. The peculiarities of synthesis of biosurfactants by strains G. rubripertincta UCM Aс-122 and R. erythropolis Au-1 during the growth on the nutrient media with rape phosphatide concentrate as a carbon source was studied. Quantity of biomass was 9.4 – 10.1 g/l, exopoly mers –8.9-9.5 g/l and the content of cellbound trehalose lipids was 1.37 – 2.26 g/l; whereas the content of exogenous trehalose lipids –metabolites of R. erythropolis Au-1 was 2.95 g/l. It was found that the addition of trehalose lipids (0.01 g/l to the nutrient medium caused the increase of biomass on 14.6 –17.0 % and cell-bound lipids on 13.9 –15.5 %. Conclusions. Rape phosphatide concentrate is economically viable carbon source in the technologies of surfactant production by Actinobacteria. Its use promotes an increasing of exogenous surfactants strain R. erythropolisAu-1 in 3-fold compared with cultivation on nutrient medium with hexadecane. Trehalose lipids show a stimulating effect on growth and synthesis of biosurfactants by strains of G. rubripertincta UCM Ac-122 and R. erythropolisAu-1.

  14. Modeling of the Critical Micelle Concentration (CMC) of Nonionic Surfactants with an Extended Group-Contribution Method

    DEFF Research Database (Denmark)

    Mattei, Michele; Kontogeorgis, Georgios; Gani, Rafiqul

    2013-01-01

    A group-contribution (GC) property prediction model for estimating the critical micelle concentration (CMC) of nonionic surfactants in water at 25 °C is presented. The model is based on the Marrero and Gani GC method. A systematic analysis of the model performance against experimental data......; and carbohydrate derivate ethers, esters, and thiols. The model developed consists of linear group contributions, and the critical micelle concentration is estimated using the molecular structure of the nonionic surfactant alone. Compared to other models used for the prediction of the critical micelle...... is carried out using data for a wide range of nonionic surfactants covering a wide range of molecular structures. As a result of this procedure, new third order groups based on the characteristic structures of nonionic surfactants are defined and are included in the Marrero and Gani GC model. In this way...

  15. Physical stability of N,N-dimethyldecanamide/α-pinene-in-water emulsions as influenced by surfactant concentration.

    Science.gov (United States)

    Trujillo-Cayado, L A; Alfaro, M C; García, M C; Muñoz, J

    2017-01-01

    In recent years, interest in submicron emulsions has increased due to their high stability and potential applications in the encapsulation and release of active ingredients in many industrial fields, such as the food industry, pharmaceuticals or agrochemicals. Furthermore, the social demand for eco-friendly solutions to replace hazardous solvents in many dispersion formulations has steadily risen. In this study, the influence of surfactant concentration on the formation and physical stability of submicron oil-in-water emulsions using a high-pressure dual-channel homogenizer (microfluidizer) has been investigated. The formulation involved the use of a blend of two green solvents (N,N-dimethyldecanamide and α-pinene) as dispersed phase and a nonionic polyoxyethylene glycerol ester derived from coconut oil as emulsifier (Levenol(®) C-201), which enjoys a European eco-label. Therefore, these emulsions may find applications as matrices for agrochemicals. Physical stability and rheological properties of the emulsions studied showed an important dependence on the eco-friendly surfactant concentration. The lowest surfactant concentration (1wt%) yielded the onset of a creaming process after a short aging time and was not enough to avoid recoalescence during emulsification. On the other hand, the higher surfactant concentrations (4-5wt%) resulted in depletion flocculation, which in turn triggered emulsion destabilization by coalescence. The optimum physical stability was exhibited by emulsions containing intermediate surfactant concentrations (2-3wt%) since coalescence was hardly significant and the onset of a weak creaming destabilization process was substantially delayed.

  16. Determination of the Critical Micelle Concentration of Cationic Surfactants: An Undergraduate Experiment

    Science.gov (United States)

    Huang, Xirong; Yang, Jinghe; Zhang, Wenjuan; Zhang, Zhenyu; An, Zesheng

    1999-01-01

    A novel method based on the catalytic effect of micelles exerted by cetyltrimethylammonium bromide (CTAB) and cetylpyridinium bromide (CPB), respectively, on the indicator reaction between H2O2 and bromopyrogallol red (BPR), a triphenylmethane dye, was developed for undergraduates to determine the critical micelle concentration (cmc) of CTAB and CPB. The indicator reaction was monitored by a fixed-time kinetic-spectrophotometric technique. Under the experimental conditions the cmc values of CTAB and CPB were (4.8 ± 0.3) x 10-4 mol/L and (4.5 ± 0.3) x 10-4mol/L, which were close to the literature values of 9.2 x 10-4 mol/L and 9.0 x 10-4 mol/L, respectively. Detailed discussion on the selection of experimental conditions was made to minimize the effect of electrolytes on the cmc's of surfactants and to maintain the high accuracy of the experimental data. As an undergraduate physicochemical laboratory experiment the present method had several attractive features. The procedure is simple and easy to perform, does not require special equipment, and does not need expensive or toxic reagents. In addition, it is a versatile method that can be applied to a wide variety of both anionic and cationic surfactants.

  17. Prediction on Critical Micelle Concentration of Nonionic Surfactants in Aqueous Solution: Quantitative Structure-Property Relationship Approach

    Institute of Scientific and Technical Information of China (English)

    王正武; 黄东阳; 宫素萍; 李干佐

    2003-01-01

    In order to predict the critical micelle concentration (cmc) of nonionic surfactants in aqueous solution, a quantitative structure-property relationship (QSPR) was found for 77 nonionic surfactants belonging to eight series. The best-regressed model contained four quantum-chemical descriptors, the heat of formation (△H), the molecular dipole moment (D), the energy of the lowest unoccupied molecular orbital (ELUMO) and the energy of the highest occupied molecular orbital (EHOMO) of the surfactant molecule; two constitutional descriptors, the molecular weight of surfactant (M) and the number of oxygen and nitrogen atoms (nON ) of the hydrophilic fragment of surfactant molecule; and one topological descriptor, the Kier & Hall index of zero order (KH0) of the hydrophobic fragment of the surfactant. The established general QSPR between Ig (cmc) and the descriptors produced a relevant coefficient of multiple determination: R2=0.986. When cross terms were considered, the corresponding best model contained five descriptors ELUMO, D,KH0, M and a cross term nON·KH0, Which also produced the same coefficient as the seven-parameter model.

  18. Effect of Temperature on the Critical Micelle Concentration and Micellization Thermodynamic of Nonionic Surfactants: Polyoxyethylene Sorbitan Fatty Acid Esters

    Directory of Open Access Journals (Sweden)

    Ehsan Mohajeri

    2012-01-01

    Full Text Available In this study, non-ionic surfactants, polyoxyethylene sorbitan fatty acid esters (polysorbate are chosen to examine the temperature effect on the CMC over a wide temperature range. The enthalpy and entropy of micelle formation are evaluated according to the phase separation model. The surface tension of solutions was determined by means of Du Nöuys ring. The CMC values were taken from the sharp breaks in the surface tension vs. logarithms of surfactant concentration plots. As the surfactants' chain length increases the CMC at a constant temperature decreases, which is directly related to the decrease of hydrophilicity of the molecules. For each surfactant, as the system temperature increases, the CMC initially decreases and then increases, owing to the smaller probability of hydrogen bond formation at higher temperatures. The onset of micellization tends to occur at higher concentrations as the temperature increases. To evaluate the enthalpy of micellization, the CMCs are first correlated by a polynomial equation. It is found that ∆Gºm decreases monotonically as the temperature increases over the whole temperature range. Both ∆Hºm and ∆Sºm appear to be decrease monotonically with an increase in temperature. The compensation temperature was found to be 42 ºC by linear regression over the whole temperature range and for all three surfactant systems together.

  19. Calix-arene silver nanoparticles interactions with surfactants are charge, size and critical micellar concentration dependent.

    Science.gov (United States)

    Tauran, Yannick; Brioude, Arnaud; Shahgaldian, Patrick; Cumbo, Alessandro; Kim, Beomjoon; Perret, Florent; Coleman, Anthony W; Montasser, Imed

    2012-10-04

    The interactions of silver nanoparticles capped by various calix[n]arenes bearing sulphonate groups at the para and/or phenolic faces with cationic, neutral and anionic surfactants have been studied. Changes in the plasmonic absorption show that only the calix[4]arene derivatives sulphonated at the para-position interact and then only with cationic surfactants. The interactions follow the CMC values of the surfactants either as simple molecules or mixed micelles.

  20. INDUCTION OF AGGREGATE FORMATION OF CATIONIC POLYSOAPS AND SURFACTANTS BY LOW CONCENTRATIONS OF ADDITIVES IN AQUEOUS-SOLUTION

    NARCIS (Netherlands)

    WANG, GJ; ENGBERTS, JBFN

    1994-01-01

    The induction of aggregate formation of cationic polysoaps ((CL)-Copol C1-12), cetyltrimethylammonium bromide (CTAB), n-dodecyltrimethylammonium bromide (DTAB), and n-dodecylmethyldiallylammonium bromide (DMDAAB) by low concentrations of Methyl Orange (10(-5)-10(-4) M) and anionic surfactants (conce

  1. Analyzing freely dissolved concentrations of cationic surfactant utilizing ion-exchange capability of polyacrylate coated solid-phase microextraction fibers

    NARCIS (Netherlands)

    Chen, Y.; Droge, S.T.J.; Hermens, J.L.M.

    2012-01-01

    A 7-μm polyacrylate (PA) coated fiber was successfully employed to determine freely dissolved concentrations of cationic surfactants by solid-phase microextraction (SPME) and utilizing the capability of the PA-coating to sorb organic cations via ion-exchange at carboxylic groups. Measured fiber-wate

  2. Expression profiles of hydrophobic surfactant proteins in children with diffuse chronic lung disease

    Directory of Open Access Journals (Sweden)

    Guttentag Susan

    2005-07-01

    Full Text Available Abstract Background Abnormalities of the intracellular metabolism of the hydrophobic surfactant proteins SP-B and SP-C and their precursors may be causally linked to chronic childhood diffuse lung diseases. The profile of these proteins in the alveolar space is unknown in such subjects. Methods We analyzed bronchoalveolar lavage fluid by Western blotting for SP-B, SP-C and their proforms in children with pulmonary alveolar proteinosis (PAP, n = 15, children with no SP-B (n = 6, children with chronic respiratory distress of unknown cause (cRD, n = 7, in comparison to children without lung disease (n = 15 or chronic obstructive bronchitis (n = 19. Results Pro-SP-B of 25–26 kD was commonly abundant in all groups of subjects, suggesting that their presence is not of diagnostic value for processing defects. In contrast, pro-SP-B peptides cleaved off during intracellular processing of SP-B and smaller than 19–21 kD, were exclusively found in PAP and cRD. In 4 of 6 children with no SP-B, mutations of SFTPB or SPTPC genes were found. Pro-SP-C forms were identified at very low frequency. Their presence was clearly, but not exclusively associated with mutations of the SFTPB and SPTPC genes, impeding their usage as candidates for diagnostic screening. Conclusion Immuno-analysis of the hydrophobic surfactant proteins and their precursor forms in bronchoalveolar lavage is minimally invasive and can give valuable clues for the involvement of processing abnormalities in pediatric pulmonary disorders.

  3. A novel, rapid and automated conductometric method to evaluate surfactant-cells interactions by means of critical micellar concentration analysis.

    Science.gov (United States)

    Tiecco, Matteo; Corte, Laura; Roscini, Luca; Colabella, Claudia; Germani, Raimondo; Cardinali, Gianluigi

    2014-07-25

    Conductometry is widely used to determine critical micellar concentration and micellar aggregates surface properties of amphiphiles. Current conductivity experiments of surfactant solutions are typically carried out by manual pipetting, yielding some tens reading points within a couple of hours. In order to study the properties of surfactant-cells interactions, each amphiphile must be tested in different conditions against several types of cells. This calls for complex experimental designs making the application of current methods seriously time consuming, especially because long experiments risk to determine alterations of cells, independently of the surfactant action. In this paper we present a novel, accurate and rapid automated procedure to obtain conductometric curves with several hundreds reading points within tens of minutes. The method was validated with surfactant solutions alone and in combination with Saccharomyces cerevisiae cells. An easy-to use R script, calculates conductometric parameters and their statistical significance with a graphic interface to visualize data and results. The validations showed that indeed the procedure works in the same manner with surfactant alone or in combination with cells, yielding around 1000 reading points within 20 min and with high accuracy, as determined by the regression analysis.

  4. Aggregation Kinetics and Transport of Single-Walled CarbonNanotubes at Low Surfactant Concentrations

    Science.gov (United States)

    Little is known about how low levels of surfactants can affect the colloidal stability of single-walled carbon nanotubes (SWNTs) and how surfactant-wrapping of SWNTs can impact ecological exposures in aqueous systems. In this study, SWNTs were suspended in water with sodium ...

  5. Fluorophotometric determination of critical micelle concentration (CMC) of ionic and non-ionic surfactants with carbon dots via Stokes shift.

    Science.gov (United States)

    Lavkush Bhaisare, Mukesh; Pandey, Sunil; Shahnawaz Khan, M; Talib, Abou; Wu, Hui-Fen

    2015-01-01

    A new and facile method for the determination of critical micelle concentration (CMC) of ionic and non-ionic surfactants is proposed in this article. Carbon dots exhibited substantial fluorescence and therefore enhanced the sensitivity of this evaluation. Understanding the formation of surfactant micelles is vital for the applications of biomedicine such as drug fabrication and smart molecular vehicles in delivering therapeutic dosage to various molecular sites. The fluorescence property of carbon dots was utilized for the first time to estimate the critical micelle concentration of surfactants. The central concept of the approach is based on the Stokes shift determination of a system composed of constant amount of carbon dots with varying concentrations of ionic and non-ionic surfactants. The synthesized carbon dots were characterized by FTIR, TEM, XRD, Raman, UV, and fluorescence spectroscope. The carbon dots were excited at 280 nm so as to obtain maximum emission for the Stokes shift measurement. The CMC value of cetyltrimethyl ammonium bromide (CTAB), sodium dodecyl sulfate (SDS), Triton X-100, dodecyldimethyl(3-sulfopropyl)ammonium hydroxide (SB-12) evaluated by this approach was found to be 0.98, 7.3, 0.19, and 3.5mM, respectively. The signals of spectra were assigned and explained in terms of both electron transitions between specific molecular orbital and the interaction with solvent.

  6. Evaluation of anionic surfactant concentrations in US effluents and probabilistic determination of their combined ecological risk in mixing zones.

    Science.gov (United States)

    McDonough, Kathleen; Casteel, Kenneth; Itrich, Nina; Menzies, Jennifer; Belanger, Scott; Wehmeyer, Kenneth; Federle, Thomas

    2016-12-01

    Alcohol sulfates (AS), alcohol ethoxysulfates (AES), linear alkyl benzenesulfonates (LAS) and methyl ester sulfonates (MES) are anionic surfactants that are widely used in household detergents and consumer products resulting in over 1 million tons being disposed of down the drain annually in the US. A monitoring campaign was conducted which collected grab effluent samples from 44 wastewater treatment plants (WWTPs) across the US to generate statistical distributions of effluent concentrations for anionic surfactants. The mean concentrations for AS, AES, LAS and MES were 5.03±4.5, 1.95±0.7, 15.3±19, and 0.35±0.13μg/L respectively. Since each of these surfactants consist of multiple homologues that differ in their toxicity, the concentration of each homologue measured in an effluent sample was converted into a toxic unit (TU) by normalizing to the predicted no effect concentration (PNEC) derived from high tier effects data (mesocosm studies). The statistical distributions of the combined TUs in the effluents were used in combination with distributions of dilution factors for WWTP mixing zones to conduct a US-wide probabilistic risk assessment for the aquatic environment for each of the surfactants. The 90th percentile level of TUs for AS, AES, LAS and MES in mixing zones were 1.89×10(-2), 2.73×10(-3), 2.72×10(-2), and 3.65×10(-5) under 7Q10 (lowest river flow occurring over a 7day period every 10years) low flow conditions. Because these surfactants have the same toxicological mode of action, the TUs were summed and the aquatic safety for anionic surfactants as a whole was assessed. At the 90th percentile level under the conservative 7Q10 low flow conditions the forecasted TUs were 4.21×10(-2) which indicates that there is a significant margin of safety for the class of anionic surfactants in US aquatic environments.

  7. Hexadecyltrimethylammonium bromide micellization in glycine, diglycine, and triglycine aqueous solutions as a function of surfactant concentration and temperatures

    Science.gov (United States)

    Ali, Anwar; Malik, Nisar Ahmad; Uzair, Sahar; Ali, Maroof; Ahmad, Mohammad Faiz

    2014-06-01

    Micellization behavior of hexadecyltrimethylammonium bromide (HTAB) was investigated conductometrically in aqueous solutions containing 0.02 mol kg-1glycine (Gly), diglycine (Gly-Gly), and triglycine (Gly-Gly-Gly) as a function of surfactant concentration at different temperatures. The critical micelle concentration (CMC) of HTAB exhibits a decreasing trend as the number of carbon atoms increases from Gly to Gly-Gly-Gly, favoring the micelle formation. The values of CMC and the degree of counterion dissociation of the micelles were utilized to evaluate the standard free energy for transferring the surfactant hydrophobic chain out of the solvent to the interior of the micelle, Δ G {HP/○}, free energy associated with the surface contributions, Δ G {S/○}, standard free energy, Δ G {m/○}, enthalpy, Δ H {m/○}, and entropy, Δ S {m/○} of micellization were also calculated. The results show that the micellization of HTAB in aqueous solutions as well as in aqueous Gly/Gly-Gly/Gly-Gly-Gly solutions is primarily governed by the entropy gain due to the transfer of the hydrophobic groups of the surfactant from the solvent to the interior part of the micelle. The CMC obtained by fluorometric method is in close agreement with those obtained conductometrically. Furthermore, decrease in the I 1/ I 3 ratio of pyrene fluorescence intensity suggests the solubilization of the additives by the surfactant micelles and that this solubilization increases as the hydrophobicity increases from Gly to Gly-Gly-Gly.

  8. Self-healing Dynamics of Surfactant Coatings on Thin Viscous Films

    CERN Document Server

    Strickland, Stephen L; Sayanagi, M Richard; Conti, Cameron; Daniels, Karen E; Levy, Rachel

    2013-01-01

    We investigate the dynamics of an insoluble surfactant on the surface of a thin viscous fluid spreading inward to fill a surfactant-free region. During the initial stages of surfactant self-healing, Marangoni forces drive an axisymmetric ridge inward to coalesce into a growing central distension; this is unlike outward-spreading, in which the ridge decays. In later dynamics, the distension slowly decays and the surfactant concentration equilibrates. We present results from experiments in which we simultaneously measure the surfactant concentration (using fluorescently-tagged lipids) and the fluid height profile (via laser profilometry). We compare the results to simulations of a mathematical model using parameters from the experiments. For surfactant concentrations close to but below the critical monolayer concentration, we observe agreement between the height profiles in the numerical simulations and the experiment, but disagreement in the surfactant distribution. In experiments at lower concentrations, the ...

  9. Modeling of surfactant transport and adsorption in porous media

    Energy Technology Data Exchange (ETDEWEB)

    Chung, F.T.H.

    1991-04-01

    When surfactant solution is flowing in a reservoir formation, surfactants will be diluted by flow dispersion, retained in dead-end pores, adsorbed on rock surfaces, or precipitated due to ion exchange. The loss of surfactant will be detrimental to the performance of gas foam. Information of surfactant concentration profiles in reservoir formations is essential for gas foaming technique development. The major objective of this research is to investigate with mathematical models the transport and dynamic adsorption of surfactants in porous media. The mathematical models have taken into account the convection, dispersion, capacitance, and adsorption effects on concentrations of surfactants. Numerical methods and computer programs have been developed which can be used to match experimental results and to determine the characterization parameters in the models. The models can be included in foam simulation programs to calculate surfactant concentration profiles in porous media. A flow experimental method was developed to measure the effluent surfactant concentration, which will be used to determine the model parameters. Commercial foaming agent Alipal CD-128 was used in this study. Equilibrium adsorption and surfactant precipitation have been tested. Tracer solutions with a nonadsorbing solute such as dextrose and sucrose were used to determine the dispersion parameters for the experimental sandpack; thus, the adsorption of the surfactant in the test sand can be identified with an adequate model. 49 refs., 21 figs.

  10. Competitive adsorption of surfactants and hydrophilic silica particles at the oil-water interface: interfacial tension and contact angle studies.

    Science.gov (United States)

    Pichot, R; Spyropoulos, F; Norton, I T

    2012-07-01

    The effect of surfactants' type and concentration on the interfacial tension and contact angle in the presence of hydrophilic silica particles was investigated. Silica particles have been shown to have an antagonistic effect on interfacial tension and contact angle in the presence of both W/O and O/W surfactants. Silica particles, combined with W/O surfactant, have no effect on interfacial tension, which is only dictated by the surfactant concentration, while they strongly affect interfacial tension when combined with O/W surfactants. At low O/W surfactant, both particles and surfactant are adsorbed at the interface, modifying the interface structure. At higher concentration, interfacial tension is only dictated by the surfactant. By increasing the surfactant concentration, the contact angle that a drop of aqueous phase assumes on a glass substrate placed in oil media decreases or increases depending on whether the surfactant is of W/O or O/W type, respectively. This is due to the modification of the wettability of the glass by the oil or water induced by the surfactants. Regardless of the surfactant's type, the contact angle profile was dictated by both particles and surfactant at low surfactant concentration, whereas it is dictated by the surfactant only at high concentration.

  11. Evaluating the accuracy of the colorimetric method of determing the concentration of nonionogenic surfactant, with use of thiocyanocobaltammonium

    Energy Technology Data Exchange (ETDEWEB)

    Safiullina, L.A.; Konyukhova, T.Z.; Shtangeyev, A.L.; Tarasova, N.I.

    1981-01-01

    An examination is made of the results of evaluating the accuracy of the colorimetric method of determining the concentration of nonionogenic surfactants (NPAV) and influence on the results of analysis of a number of factors (time from the beginning of making the analysis, method of extraction, admixtures of ions of iron, etc.). A technique is pinpointed for analysis, and sensitivity of the method is established for determining the NPAV with the use of TCCA.

  12. Suspended sediment concentration profiles from synoptic satellite observations

    Digital Repository Service at National Institute of Oceanography (India)

    Ramakrishnan, R.; Rajawat, A.S.; Chauhan, O.S.

    A method is developed to estimate vertical suspended sediment concentration (SSC) profiles in Gulf of Kachchh, from the sediment concentration values derived from synoptic observations of Ocean Colour Monitor (OCM). Under the influence of currents...

  13. Cyclic voltammetric technique for the determination of the critical micelle concentration of surfactants, self-diffusion coefficient of micelles, and partition coefficient of an electrochemical probe

    Energy Technology Data Exchange (ETDEWEB)

    Mandal, A.B.; Nair, B.U. (Central Leather Research Inst., Madras (India))

    1991-10-31

    Critical micelle concentrations (cmc) of cetyltrimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC) surfactants in aqueous solution have been determined by using the cyclic voltammetric technique. (Co(en){sub 3})(ClO{sub 4}){sub 3} has been used as the redox-active electrochemical probe. The cmc values so obtained for the surfactants were found to be in good agreement with the literature values. The partition coefficient, K, of the electrochemical probe between water and surfactants in nonmicellar and micellar states was estimated using the peak current, i{sub p} and half-wave potential, E{sub 1/2} values. The self-diffusion coefficient, D{sub m}, interaction parameter, k{sub f}, and hydrodynamic radius of the micelles were also estimated. The results suggest that the probe is sensitive to the nature of surfactant as well as surfactant concentration.

  14. Influence of surfactants in forced dynamic dewetting.

    Science.gov (United States)

    Henrich, Franziska; Fell, Daniela; Truszkowska, Dorota; Weirich, Marcel; Anyfantakis, Manos; Nguyen, Thi-Huong; Wagner, Manfred; Auernhammer, Günter K; Butt, Hans-Jürgen

    2016-09-20

    In this work we show that the forced dynamic dewetting of surfactant solutions depends sensitively on the surfactant concentration. To measure this effect, a hydrophobic rotating cylinder was horizontally half immersed in aqueous surfactant solutions. Dynamic contact angles were measured optically by extrapolating the contour of the meniscus to the contact line. Anionic (sodium 1-decanesulfonate, S-1DeS), cationic (cetyl trimethylammonium bromide, CTAB) and nonionic surfactants (C4E1, C8E3 and C12E5) with critical micelle concentrations (CMCs) spanning four orders of magnitude were used. The receding contact angle in water decreased with increasing velocity. This decrease was strongly enhanced when adding surfactant, even at surfactant concentrations of 10% of the critical micelle concentration. Plots of the receding contact angle-versus-velocity almost superimpose when being plotted at the same relative concentration (concentration/CMC). Thus the rescaled concentration is the dominating property for dynamic dewetting. The charge of the surfactants did not play a role, thus excluding electrostatic effects. The change in contact angle can be interpreted by local surface tension gradients, i.e. Marangoni stresses, close to the three-phase contact line. The decrease of dynamic contact angles with velocity follows two regimes. Despite the existence of Marangoni stresses close to the contact line, for a dewetting velocity above 1-10 mm s(-1) the hydrodynamic theory is able to describe the experimental results for all surfactant concentrations. At slower velocities an additional steep decrease of the contact angle with velocity was observed. Particle tracking velocimetry showed that the flow profiles do not differ with and without surfactant on a scales >100 μm.

  15. Analyzing freely dissolved concentrations of cationic surfactant utilizing ion-exchange capability of polyacrylate coated solid-phase microextraction fibers.

    Science.gov (United States)

    Chen, Yi; Droge, Steven T J; Hermens, Joop L M

    2012-08-24

    A 7-μm polyacrylate (PA) coated fiber was successfully employed to determine freely dissolved concentrations of cationic surfactants by solid-phase microextraction (SPME) and utilizing the capability of the PA-coating to sorb organic cations via ion-exchange at carboxylic groups. Measured fiber-water partitioning coefficients (K(fw)) were constant below a fiber loading of 2mmol per liter polyacrylate, allowing for simple and accurate analysis in a concentration range that is relevant from a risk assessment point of view. Ion-exchange was confirmed to be the main sorption mechanism because of a decreasing K(fw) with either higher CaCl(2) concentrations or lower pH, and maximum fiber uptake at the polyacrylate cation-exchange capacity (CEC, at 30mmol/L PA). Fiber-water sorption isotherms were established in various aqueous media in toxicological relevant concentrations. The developed SPME method has a high potential for application in ecotoxicological studies, as demonstrated in sorption studies with humic acid in different electrolyte solutions at aqueous concentrations down to the sub nM range. Cationic surfactant sorption affinities for humic acid also depend on medium composition but are orders of magnitude higher than to the PA fiber on a sorbent weight basis.

  16. The effects of surfactants on the solubility and dissolution profiles of a poorly water-soluble basic drug, carvedilol.

    Science.gov (United States)

    Incecayir, T

    2015-12-01

    This study investigated the most suitable surfactant medium for the dissolution testing of a poorly soluble basic drug, namely, carvedilol reflecting the in vivo behavior. Sodium lauryl sulfate (SLS), hexadecyltrimethylammonium bromide (CTAB) and polysorbate 80 were used as anionic, cationic and nonionic surfactants, respectively. Saturation solubilities of carvedilol were determined in the presence of SLS, CTAB and polysorbate 80 (0.5, 1 and 2% (w/v)) at pH 1.2 and 6.8. Dissolution behaviors of the commercial tablets were studied using USP apparatus II in pH 1.2, 4.5 and 6.8 buffers and pH 6.8 dissolution media with 0.5% (w/v) SLS, polysorbate 80 and CTAB. Polysorbate 80 enhanced the solubility of carvedilol irrespective of pH, while SLS and CTAB exhibited larger solubilization effect than polysorbate 80 depending on pH and the ionic nature of the surfactant. Based on in vitro dissolution profile similarity, pH 6.8 dissolution medium with 0.5% (w/v) polysorbate 80 was found to be the most biorelevant medium, which probably reflects the bioequivalence of test products to the reference product of carvedilol.

  17. Rheological Properties of Nanoparticle Silica-Surfactant Stabilized Crude Oil Emulsions: Influence of Temperature, Nanoparticle Concentration and Water Volume Fraction"

    Science.gov (United States)

    Kinsey, Erin; Pales, Ashley; Li, Chunyan; Mu, Linlin; Bai, Lingyun; Clifford, Heather; Darnault, Christophe

    2016-04-01

    Oil in water emulsions occur during oil extraction due to the presence of water, naturally-occurring surface-active agents and mechanical mixing in pipelines or from oil spillage. Emulsions present difficulties for use of oil in fuel and their rheological properties are important to treat environmental impacts of spills. The objective of this study is to assess the rheological characteristics of oil in water emulsions stabilized by 5% NaCl brine, Tween 20 surfactant and silica nanoparticles to gain knowledge about the behavior of oil flow in pipelines and characterize them for environmental applications. Rheological behaviors such as shear rate, shear stress, and viscosity of Prudhoe Bay crude oil emulsions were analyzed with varying percent of water volume fractions (12.5, 25 and 50%), varying weight percent of silica nanoparticles (0.001, 0.01 and 0.1 weight %), with and without 2 CMC Tween 20 nonionic surfactant. Emulsions with varying water volume fractions were analyzed at 20, 40 and 60 degrees Celsius. Flow curve analysis of the emulsions was performed using an Anton-Paar rheometer. Preliminary findings indicate that increased temperature and increasing the concentration of nanoparticles both produced lower shear stress and that the addition of surfactant decreased the viscosity and shear stress of the emulsions.

  18. Dynamic Study of Gemini Surfactant and Single-chain Surfactant at Air/Water Interface

    Institute of Scientific and Technical Information of China (English)

    Yi Jian CHEN; Gui Ying XU; Shi Ling YUAN; Hai Ying SUN

    2005-01-01

    Molecular dynamics (MD) simulation are used to study the properties of gemini surfactant of ethyl-α,ω-bis(dodecyldimethylammonium bromide) (C12C2C12) and dodecyltrimethylammonium bromide (DTAB) at the air/water interface, respectively. In the two systems,the surfactant concentrations are both 28 wt. %, and other conditions are also the same. After reaching the thermodynamic equilibrium, the concentration profiles, the radial distributions functions (RDF) and the mean squared displacement (MSD) are investigated. Theresults reveal that the surface activity of C12C2C12 suffactant is higher than DTAB surfactant.

  19. Discourse of the form and concentration of surfactants to ensure the sustainability foam-emulsive products

    Directory of Open Access Journals (Sweden)

    Oleg

    2015-05-01

    Full Text Available Introduction. Development of dry mixes for making spumy and emulsion products are topical, because nowadays there is a tendency to minimize the time spent on the process of cooking, which is achieved by the use of semi finished products high degree of readiness. Materials and methods. Foaming ability was determined by the method of multiplicity of the foam, the stability of unstable foam-by the half-life method of foam, highly resistant foam - as a ratio of the height of the column of foam after exposure for 24 hours. Results. Was determined the influence of sunflower oil on the foaming ability and half-life foam of systems «sodium caseinate-oil». It was found that getting systems with high index of foaming capacity and foam stability in the presence of oil in the system is impossible without the use of low molecular weight surfactants. Substantiated recommendations regarding the feasibility of using two surfactants in systems «sodium caseinate-surfactants-oil», which provide the necessary kinship surfaces air, fat and water phases. it has been found that the use of 2,5...3,5% mono-and diglycerides of fatty acid sand Lecithin’s 0.15...0.25% in the content of sodium caseinate about 0.5% allows to receive the stable foam-emulsive systems containing sunflower oil 7...8% and foaming ability about 640±1%. Conclusions. It is established that for ensuring high indicators foaming capacity and stability of foam-emulsive systems required the use of low-molecular surfactants. The research results, is recommended to use when developing technology of foam-emulsive products.

  20. Discourse of the form and concentration of surfactants to ensure the sustainability foam-emulsive products

    Directory of Open Access Journals (Sweden)

    O. Kotlyar

    2015-05-01

    Full Text Available Introduction. Development of dry mixes for making spumy and emulsion products are topical, because nowadays there is a tendency to minimize the time spent on the process of cooking, which is achieved by the use of semi finished products high degree of readiness. Materials and methods. Foaming ability was determined by the method of multiplicity of the foam, the stability of unstable foam-by the half-life method of foam, highly resistant foam - as a ratio of the height of the column of foam after exposure for 24 hours. Results. Was determined the influence of sunflower oil on the foaming ability and half-life foam of systems «sodium caseinate-oil». It was found that getting systems with high index of foaming capacity and foam stability in the presence of oil in the system is impossible without the use of low molecular weight surfactants. Substantiated recommendations regarding the feasibility of using two surfactants in systems «sodium caseinate-surfactants-oil», which provide the necessary kinship surfaces air, fat and water phases. it has been found that the use of 2,5...3,5% mono-and diglycerides of fatty acid sand Lecithin’s 0.15...0.25% in the content of sodium caseinate about 0.5% allows to receive the stable foam-emulsive systems containing sunflower oil 7...8% and foaming ability about 640±1%. Conclusions. It is established that for ensuring high indicators foaming capacity and stability of foam-emulsive systems required the use of low-molecular surfactants. The research results, is recommended to use when developing technology of foam-emulsive products. Introduction

  1. Edge-wave-driven durable variations in the thickness of the surfactant film and concentration of surface floats

    Energy Technology Data Exchange (ETDEWEB)

    Averbukh, Elena [Nizhny Novgorod State Technical University n.a. R.E. Alekseev, Minin St. 24, 603950 Nizhny Novgorod (Russian Federation); Kurkina, Oksana, E-mail: okurkina@hse.ru [Nizhny Novgorod State Technical University n.a. R.E. Alekseev, Minin St. 24, 603950 Nizhny Novgorod (Russian Federation); National Research University Higher School of Economics, 25/12 Bol' shaya Pecherskaya St., 603155 Nizhny Novgorod (Russian Federation); Kurkin, Andrey [Nizhny Novgorod State Technical University n.a. R.E. Alekseev, Minin St. 24, 603950 Nizhny Novgorod (Russian Federation); Soomere, Tarmo, E-mail: soomere@cs.ioc.ee [Institute of Cybernetics at Tallinn University of Technology, Akadeemia tee 21, 12618 Tallinn (Estonia); Estonian Academy of Sciences, Kohtu 6, 10130 Tallinn (Estonia)

    2014-01-03

    By employing a simple model for small-scale linear edge waves propagating along a homogeneous sloping beach, we demonstrate that certain combinations of linear wave components may lead to durable changes in the thickness of the surfactant film, equivalently, in the concentration of various substances (debris, litter) floating on the water surface. Such changes are caused by high-amplitude transient elevations that resemble rogue waves and occur during dispersive focusing of wave fields with a continuous spectrum. This process can be treated as an intrinsic mechanism of production of patches in the surface layer of an otherwise homogeneous coastal environment impacted by linear edge waves.

  2. Effect of surfactant concentration on characteristics of mesoporous bioactive glass prepared by evaporation induced self-assembly process

    Science.gov (United States)

    Shih, Chi-Chung; Chien, Chi-Sheng; Kung, Jung-Chang; Chen, Jian-Chih; Chang, Shy-Shin; Lu, Pei-Shan; Shih, Chi-Jen

    2013-01-01

    Mesoporous bioactive glasses were prepared by the evaporation-induced self-assembly method. The main objective of the present study is to determine the effect of surfactant concentration on the synthesis of SiO2-CaO-P2O5 mesoporous bioactive glasses; the characterization techniques used include X-ray diffraction, scanning electron microscopy and nitrogen adsorption and desorption isotherms. The results show that the specific surface area initially increased with increasing surfactant concentrations in the range of 2.1-9.1 wt% and significantly decreased from 328.7 to 204.0 m2/g in the concentration range of 9.1-12.5 wt%. For texture evaluation, the selected area electron diffraction patterns of the mesoporous bioactive glass precursor gels (9.1 wt% F127) calcined at different temperatures were analyzed; these patterns support the notion that some glassy structures in bioactive glasses become crystalline following heat treatment. The scanning electron microscopy images and X-ray diffraction patterns obtained agree with the inductively coupled plasma with atomic emission spectroscopy results as the mesoporous bioactive glasses can induce the formation of an apatite-like layer on their surface in SBF, even after short soaking periods.

  3. Seasonal variation in diurnal atmospheric grass pollen concentration profiles

    DEFF Research Database (Denmark)

    Peel, Robert George; Ørby, Pia Viuf; Skjøth, Carsten Ambelas

    2014-01-01

    In this study, the diurnal atmospheric grass pollen concentration profile within the Danish city of Aarhus was shown to change in a systematic manner as the pollen season progressed. Although diurnal grass pollen profiles can differ greatly from day-to-day, it is common practice to establish...... the time of day when peak concentrations are most likely to occur using seasonally averaged diurnal profiles. Atmospheric pollen loads are highly dependent upon emissions, and different species of grass are known to flower and emit pollen at different times of the day and during different periods...... of the pollen season. Pollen concentrations are also influenced by meteorological factors - directly through those parameters that govern pollen dispersion and transport, and indirectly through the weather-driven flowering process. We found that three different profiles dominated the grass pollen season...

  4. Synthesis and Characterization of Nanoporous Carbon Materials; The Effect of Surfactant Concentrations and Salts

    Directory of Open Access Journals (Sweden)

    Shokoofeh Geranmayeh

    2011-01-01

    Full Text Available Nanoporous carbon framework was synthesized using phenol and formaldehyde as carbon precursors and triblock copolymer (pluronic F127 as soft template via evaporation induced self-assembly. Hexagonal mesoporous carbon with specific surface area of 350 m2/g through optimizing the situation was obtained. The effects of different surfactant/phenol molar ratio and presence of salts on specific surface area, pore size and pore volume for all the prepared samples were studied by means of the Brunauer-Emmett-Teller (BET formalism, powder X-ray diffraction technique and FT-IR spectroscopy.

  5. Nanocomposite formation between alpha-glucosyl stevia and surfactant improves the dissolution profile of poorly water-soluble drug.

    Science.gov (United States)

    Uchiyama, Hiromasa; Tozuka, Yuichi; Nishikawa, Masahiro; Takeuchi, Hirofumi

    2012-05-30

    The formation of a hybrid-nanocomposite using α-glucosyl stevia (Stevia-G) and surfactant was explored to improve the dissolution of flurbiprofen (FP). As reported previously, the dissolution amount of FP was enhanced in the presence of Stevia-G, induced by the formation of an FP and Stevia-G-associated nanostructure. When a small amount of sodium dodecyl sulfate (SDS) was present with Stevia-G, the amount of dissolved FP was extremely enhanced. This dissolution-enhancement effect was also observed with the cationic surfactant of dodecyl trimethyl ammonium bromide, but not with the non-ionic surfactant of n-octyl-β-D-maltopyranoside. To investigate the dissolution-enhancement effect of Stevia-G/SDS mixture, the pyrene I(1)/I(3) ratio was plotted versus the Stevia-G concentration. The pyrene I(1)/I(3) ratio of Stevia-G/SDS mixture had a sigmoidal curve at lower Stevia-G concentrations compared to the Stevia-G solution alone. These results indicate that the Stevia-G/SDS mixture provides a hydrophobic core around pyrene molecules at lower Stevia-G concentrations, leading to nanocomposite formation between Stevia-G and SDS. The nanocomposite of Stevia-G/SDS showed no cytotoxicity to Caco-2 cells at a mixture of 0.1% SDS and 1% Stevia-G solution, whereas 0.1% SDS solution showed high toxicity. These results suggest that the nanocomposite formation of Stevia-G/SDS may be useful way to enhance the dissolution of poorly water-soluble drugs without special treatment.

  6. Assessing guest diffusivities in porous hosts from transient concentration profiles

    NARCIS (Netherlands)

    L. Heinke; D. Tzoulaki; C. Chmelik; F. Hibbe; J.M. van Baten; H. Lim; Y. Li; R. Krishna; J. Kärger

    2009-01-01

    Using the short-chain-length alkanes from ethane to n-butane as guest molecules, transient concentration profiles during uptake or release (via interference microscopy) and tracer exchange (via IR microimaging) in Zn(tbip), a particularly stable representative of a novel family of nanoporous materia

  7. Soil flushing of cresols contaminated soil: application of nonionic and ionic surfactants under different pH and concentrations.

    Science.gov (United States)

    Gitipour, Saeid; Narenjkar, Khadijeh; Sanati Farvash, Emad; Asghari, Hossein

    2014-01-01

    In this study, the viability of soil flushing on the removal of cresols (meta-, ortho-, and para-cresols) from contaminated soil has been investigated. High production and distribution of cresols in the environment indicate their potential for a widespread exposure to humans. The presence of these compounds in soil could cause a significant threat to environment, as they are toxic and refractory in nature. Cresols are persistent chemicals which are classified by the United State Environmental Protection Agency (U.S.EPA) as Group C, possible human carcinogens. Soil flushing is one of the soil remediation technologies which could by applied for treatment of hydrocarbon contaminated soil. Flushing of the contaminated soil samples was carried out by using sodium dodecyl sulfate (SDS) and Triton X-100 surfactant solutions at the concentrations of 0.1%, 0.2%, 0.3%, and 0.4% (W/W). Three acidic, neutral, and alkaline environments were utilized by adjusting pH of the washing solutions at 3, 7 and 12 to evaluate the effect of washing environment in removing cresols. The results of this research denote that the highest removal efficiencies of 79.6% and 83.51% were achieved for m-cresol and total o- and p-cresols, respectively, under the alkaline environment of pH12 at 0.4% (W/W) SDS concentration. Regarding performance of Triton X-100, the removal efficiencies of 80.26% and 80.14% for the above cresols were attained under similar conditions. Hence, illustrating the effectiveness of surfactants in soil flushing remediation of cresols contaminated soil.

  8. Surfactant Based Enhanced Oil Recovery and Foam Mobility Control

    Energy Technology Data Exchange (ETDEWEB)

    George J. Hirasaki; Clarence A. Miller

    2006-09-09

    Surfactant flooding has the potential to significantly increase recovery over that of conventional waterflooding. The availability of a large number of surfactant structures makes it possible to conduct a systematic study of the relation between surfactant structure and its efficacy for oil recovery. A mixture of two surfactants was found to be particularly effective for application in carbonate formations at low temperature. The mixture is single phase for higher salinity or calcium concentrations than that for either surfactant used alone. This makes it possible to inject the surfactant slug with polymer close to optimal conditions and yet be single phase. A formulation has been designed for a particular field application. It uses partially hydrolyzed polyacrylamide for mobility control. The addition of an alkali such as sodium carbonate makes possible in situ generation of naphthenic soap and significant reduction of synthetic surfactant adsorption. The design of the process to maximize the region of ultra-low IFT takes advantage of the observation that the ratio of soap to synthetic surfactant is a parameter in the conditions for optimal salinity. Even for a fixed ratio of soap to surfactant, the range of salinity for low IFT was wider than that reported for surfactant systems in the literature. Low temperature, forced displacement experiments in dolomite and silica sandpacks demonstrate that greater than 95% recovery of the waterflood remaining oil is possible with 0.2% surfactant concentration, 0.5 PV surfactant slug, with no alcohol. Compositional simulation of the displacement process demonstrates the role of soap/surfactant ratio on passage of the profile through the ultralow IFT region, the importance of a wide salinity range of low IFT, and the importance of the viscosity of the surfactant slug. Mobility control is essential for surfactant EOR. Foam is evaluated to improve the sweep efficiency of surfactant injected into fractured reservoirs as well as a

  9. The effects of GH and hormone replacement therapy on serum concentrations of mannan-binding lectin, surfactant protein D and vitamin D binding protein in Turner syndrome

    DEFF Research Database (Denmark)

    Gravholt, Claus Højbjerg; Leth-Larsen, Rikke; Lauridsen, Anna Lis

    2004-01-01

    function. In the present study we examined whether GH or hormone replacement therapy (HRT) in Turner syndrome (TS) influence the serum concentrations of MBL and two other proteins partaking in the innate immune defence, surfactant protein D (SP-D) and vitamin D binding protein (DBP). DESIGN: Study 1...

  10. THE CONCENTRATION OF SURFACTANT PROTEIN-A IN AMNIOTIC FLUID DECREASES IN SPONTANEOUS HUMAN PARTURITION AT TERM

    Science.gov (United States)

    Chaiworapongsa, Tinnakorn; Hong, Joon-Seok; Hull, William M.; Kim, Chong Jai; Gomez, Ricardo; Mazor, Moshe; Romero, Roberto; Whitsett, Jeffrey A.

    2012-01-01

    OBJECTIVE The fetus is thought to play a central role in the onset of labor. Pulmonary surfactant protein (SP)-A, secreted by the maturing fetal lung, has been implicated in the mechanisms initiating parturition in mice. The present study was conducted to determine whether amniotic fluid concentrations of SP-A and SP-B change during human parturition. STUDY DESIGN Amniotic fluid SP-A and SP-B concentrations were measured with sensitive and specific ELISA in the following groups of pregnant women: 1) mid-trimester of pregnancy between 15th and 18th weeks of gestation (n=29); 2) term pregnancy not in labor (n=28); and 3) term pregnancy in spontaneous labor (n=26). Non-parametric statistics were used for analysis. RESULTS SP-A was detected in all amniotic fluid samples. SP-B was detected in 24.1% (7/29) of mid-trimester samples and in all samples at term. The median amniotic fluid concentration of SP-A and SP-B were significantly higher in women at term than in women in the mid-trimester (SP-A term no labor: median 5.6 μg/ml, range 2.2–15.2 μg/ml vs. mid-trimester: median 1.64 μg/ml, range 0.1–4.7 μg/ml; and SP-B term no labor: median 0.54 μg/ml, range 0.17–1.99 μg/ml vs. mid-trimester: median 0 μg/ml, range 0–0.35 μg/ml; both plabor was significantly lower than that in women at term not in labor (term in labor: median 2.7 μg/ml, range 1.2–10.1 μg/ml vs. term no labor: median 5.6 μg/ml, range 2.2–15.2 μg/ml; plabor and those not in labor (term in labor: median 0.47 μg/ml range 0.04–1.32 μg/ml vs. term no labor: median 0.54 μg/ml range 0.17–1.99 μg/ml; p=0.2). CONCLUSION The amniotic fluid concentration of surfactant protein-A decreases in spontaneous human parturition at term. PMID:18828058

  11. Adsorption of proteins at the solution/air interface influenced by added nonionic surfactants at very low concentrations for both components. 3. Dilational surface rheology.

    Science.gov (United States)

    Fainerman, V B; Aksenenko, E V; Lylyk, S V; Lotfi, M; Miller, R

    2015-03-05

    The influence of the addition of the nonionic surfactants C12DMPO, C14DMPO, C10OH, and C10EO5 at concentrations between 10(-5) and 10(-1) mmol/L to solutions of β-casein (BCS) and β-lactoglobulin (BLG) at a fixed concentration of 10(-5) mmol/L on the dilational surface rheology is studied. A maximum in the viscoelasticity modulus |E| occurs at very low surfactant concentrations (10(-4) to 10(-3) mmol/L) for mixtures of BCS with C12DMPO and C14DMPO and for mixtures of BLG with C10EO5, while for mixture of BCS with C10EO5 the value of |E| only slightly increased. The |E| values calculated with a recently developed model, which assumes changes in the interfacial molar area of the protein molecules due to the interaction with the surfactants, are in satisfactory agreement with experimental data. A linear dependence exists between the ratio of the maximum modulus for the mixture to the modulus of the single protein solution and the coefficient reflecting the influence of the surfactants on the adsorption activity of the protein.

  12. Facile method for fabrication of surfactant-free concentrated CeO2 sols

    Science.gov (United States)

    Shcherbakov, Alexander B.; Teplonogova, Maria A.; Ivanova, Olga S.; Shekunova, Taisiya O.; Ivonin, Ivan V.; Baranchikov, Alexander Ye; Ivanov, Vladimir K.

    2017-05-01

    We report a facile method for fabrication of highly concentrated electrostatically stabilized colloidal solutions containing ultra-small cerium (IV) oxide crystallites having a narrow size distribution (3-5 nm according to x-ray diffraction, and 10-30 nm according to dynamic light scattering). The proposed method comprises hydrothermal treatment of ceric ammonium nitrate aqueous solutions having concentrations over 0.2 M, in the temperature range of 80-100 °C, and the formation of nanoceria sediments, which can be easily peptized in both protic (water, isopropanol) and aprotic (DMF) media, forming stable and transparent CeO2 sols.

  13. Effect of surfactant/water ratio and reagents' concentration on size distribution of manganese carbonate nanoparticles synthesized by microemulsion mediated route

    Science.gov (United States)

    Granata, Giuseppe; Pagnanelli, Francesca; Nishio-Hamane, Daisuke; Sasaki, Takehiko

    2015-03-01

    In this work nanoparticles of manganese carbonate were produced by microemulsion-mediated route at room temperature, without any post-thermal treatment. All produced samples were characterized by XRD and by TEM and obtained images were analyzed in order to evaluate particle size distribution, mean size and polydispersity (variance). The influence of water-surfactant molar ratio and concentration of reagents were investigated in the range 5-7.5 and 0.25-1.0 M, respectively, according to factorial design. Significant effects on particle mean size and polydispersity were assessed by statistical analysis. Results showed that by increasing the water-surfactant molar ratio from 5 to 7.5, the average particle size increased from less than 10 nm to around 100 nm, and the standard deviation increased from less than 5 nm to 35 nm. Statistical analysis put in evidence that water-surfactant molar ratio has significant positive effect on both mean and variance of particle size. Concentration of reactants, in the investigated range, did not influence mean size of particles, while significant changes of variance were observed: passing from 0.25 to 1 M concentration, variances of particle size increased for w = 5 and for w = 6.25, while decreased for w = 7.5.

  14. Efficient control system for low-concentration inorganic gases from a process vent stream: application of surfactants in spray and packed columns.

    Science.gov (United States)

    Chein, Hungmin; Aggarwal, Shankar G; Wu, Hsin-Hsien

    2004-11-01

    Control of low-concentration pollutants from a semiconductor process vent stream using a wet-scrubbing technique is a challenging task to meet Taiwan environmental emission standards. An efficient wet-scrubber is designed on a pilot scale and tested to control low concentration acid and base waste-gas emission. The scrubber system consisted of two columns, i.e., a fine spray column [cutoff diameter (based on volume), Dv(50) = 15.63 microm; Sauter mean diameter (SMD) = 7.62 microm], which is especially efficient for NH3 removal as the pH of the spraying liquid is approximately 7 followed by a packed column with a scrubbing liquid pH approximately 9.0 mainly for acids removal. It is observed that use of the surfactants in low concentration about 10(-4) M and 10(-7) M in the spray liquid and in the scrubbing liquid, respectively, remarkably enhances the removal efficiency of the system. A traditional packed column (without the spray column and the surfactant) showed that the removal efficiencies of NH3, HF, and HCl for the inlet concentration range 0.2 to 3 ppm were (n = 5) 22.6+/-3.4%, 43.4+/-5.5%, and 40.4+/-7.4%, respectively. The overall efficiencies of the proposed system (the spray column and the packed column) in the presence of the surfactant in the spray liquid and in the scrubbing liquid forthese three species were found to increase significantly (n = 5) from 60.3+/-3.6 to 82.8+/-6.8%, 59.1+/-2.7 to 83.4+/-4.2%, and 56.2+/-7.3 to 81.0+/-6.7%, respectively. In this work, development of charge on the gas-liquid interface due to the surfactants has been measured and discussed. It is concluded that the presence of charge on the gas-liquid interface is the responsible factor for enhancement of the removal efficiency (mass-transfer in liquid phase). The effects of the type of surfactants, their chain length, concentration in liquid, etc. on the removal efficiency are discussed. Since the pilot tests were performed under the operating conditions similar to most of

  15. Serum glucose concentration and lipid profile in racing horses

    Directory of Open Access Journals (Sweden)

    S. A. Hasso

    2012-01-01

    Full Text Available The aim of the present work was to evaluate serum glucose concentration and lipid profile in racing horses in Iraq. Blood samples were collected from the jugular vein of 92 clinically healthy racing horses (males and females, Arabian and Cross bred, 2-8 years old at Equestrian Club, Baghdad. Investigations included serum measurements of glucose (sg and lipid profile parameters; total cholesterol (TC, Triglyceride (TG, high density lipoprotein- cholesterol (HDL-C, low density lipoprotein-cholesterol (LDL-C, very low density lipoprotein-cholesterol (VLDL-C and the atherogenic ratio (LDL-C/HDL-C, in order to register the normal ranges and mean values of these measured parameters in Iraqi healthy racing horses. Results showed that the range and mean values ± standard error of sg were: 33.3 – 6.71 mmol/l and 5.17±0.07 mmol/l, respectively, whereas the TC was 2.07 – 4.22 mmol/l and 3.01±0.05 mmol/l, TG 0.6 – 1.47 mmol/l and 1.06±0.02 mmol/l, HDL-C 0.93 – 2.25 mmol/l and 1.50±0.03 mmol/l, LDL-C 0.10 – 2.12 mmol/l and 0.91±0.04 mmol/l, VLDL-C 0.31 -0.67 mmol/l and 0.55±0.02 mmol/l, respectively and the atherogenic ratio 0.66±0.03. The data present reference values and mean ± SE for sg and lipid profile parameters in healthy racing horses in Baghdad.

  16. Determining the neurotransmitter concentration profile at active synapses.

    Science.gov (United States)

    Scimemi, Annalisa; Beato, Marco

    2009-12-01

    Establishing the temporal and concentration profiles of neurotransmitters during synaptic release is an essential step towards understanding the basic properties of inter-neuronal communication in the central nervous system. A variety of ingenious attempts has been made to gain insights into this process, but the general inaccessibility of central synapses, intrinsic limitations of the techniques used, and natural variety of different synaptic environments have hindered a comprehensive description of this fundamental phenomenon. Here, we describe a number of experimental and theoretical findings that has been instrumental for advancing our knowledge of various features of neurotransmitter release, as well as newly developed tools that could overcome some limits of traditional pharmacological approaches and bring new impetus to the description of the complex mechanisms of synaptic transmission.

  17. Syndrome: A Comparison with Apolipoprotein Concentrations and Lipid Profile

    Directory of Open Access Journals (Sweden)

    Magdalena Krintus

    2012-01-01

    Full Text Available Objective. To investigate whether assessment of C-reactive protein (CRP and apolipoproteins, besides the traditional lipid profile, enhances the assessment process for the risk of acute coronary syndrome (ACS. Methods. The study group consisted of 220 consecutive patients admitted to hospital within the first 6 hours from the onset of chest pain. Patients were diagnosed with unstable angina (, non-ST-elevation myocardial infarction (NSTEMI; , or ST-elevation myocardial infarction (STEMI; . ACS patients were compared with 116 healthy volunteers in a case-control study. The serum was assayed on admission for CRP, apolipoproteins ApoAI and ApoB100, and lipid parameters. Results. The highest concentrations of CRP were found in NSTEMI and STEMI, with a median value four-fold higher in ACS patients than in controls (. Only CRP significantly increased the probability of ACS development (adjusted odds ratio for a 1 mg/L increase 1.90; 95% confidence interval [CI] 1.34–2.89 and explained 90% of the variation for ACS development. Similarly, we demonstrated the highest diagnostic accuracy for CRP among all investigated markers (area under the curve 0.80; 95% CI 0.75–0.85. Conclusions. Our study indicates that CRP superiorly to apolipoproteins and lipid profile facilitates the risk stratification for ACS occurrence.

  18. Detection of the critical micelle concentration of cationic and anionic surfactants based on aggregation-induced emission property of hexaphenylsilole derivatives

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    We report a fluorescence "turn-on" method to detect the critical micelle concentration (CMC) of surfactants. This method works well for both cationic and anionic surfactants. It employs an unprecedented mechanism (aggregation-induced emission, or AIE) to determine the CMC values, and the results are consistent with the data obtained by the classical techniques. In addition, this method renders the convenient detection of the CMC values. Any large and professional instruments are unnecessary, instead, a portable UV lamp and an ultrasonic generator are enough to carry out the detection in an ordinary laboratory. Considering that micelles are interesting entities and have found applications in many important fields such as emulsion polymerization, template of nanosized materials synthesis, controllable drug delivery and macromolecular self-assembling. Our experimental results may offer a facile, sensitive and promising method to detect the formation of micelles constructed by the new amphiphilic molecules and macromolecules.

  19. Detection of the critical micelle concentration of cationic and anionic surfactants based on aggregation-induced emission property of hexaphenylsilole derivatives

    Institute of Scientific and Technical Information of China (English)

    TANG Li; JIN JiaKe; ZHANG Shuang; MAO Yu; SUN JingZhi; YUAN WangZhang; ZHAO Hui; XU HaiPeng; QIN AnJun; TANG Ben Zhong

    2009-01-01

    We report a fluorescence "turn-on" method to detect the critical micelle concentration (CMC) of sur-factants. This method works well for both cationic and anionic surfactants. It employs an unprece-dented mechanism (aggregation-induced emission, or AIE) to determine the CMC values, and the re-suits are consistent with the data obtained by the classical techniques. In addition, this method renders the convenient detection of the CMC values. Any large and professional instruments are unnecessary, instead, a portable UV lamp and an ultrasonic generator are enough to carry out the detection in an ordinary laboratory. Considering that micelles are interesting entities and have found applications in many important fields such as emulsion polymerization, template of nanoeized materials synthesis, controllable drug delivery and macromolecular self-assembling. Our experimental results may offer a facile, sensitive and promising method to detect the formation of micelles constructed by the new amphiphilic molecules and macromolecules.

  20. Concentration profiles of actin-binding molecules in lamellipodia

    Science.gov (United States)

    Falcke, Martin

    2016-04-01

    Motile cells form lamellipodia in the direction of motion, which are flat membrane protrusions containing an actin filament network. The network flows rearward relative to the leading edge of the lamellipodium due to actin polymerization at the front. Thus, actin binding molecules are subject to transport towards the rear of the cell in the bound state and diffuse freely in the unbound state. We analyze this reaction-diffusion-advection process with respect to the concentration profiles of these species and provide an analytic approximation for them. Network flow may cause a depletion zone of actin binding molecules close to the leading edge. The existence of such zone depends on the free molecule concentration in the cell body, on the ratio of the diffusion length to the distance bound molecules travel rearward with the flow before dissociating, and the ratio of the diffusion length to the width of the region with network flow and actin binding. Our calculations suggest the existence of depletion zones for the F-actin cross-linkers filamin and α-actinin in fish keratocytes (and other cell types), which is in line with the small elastic moduli of the F-actin network close to the leading edge found in measurements of the force motile cells are able to exert.

  1. Blood cadmium concentration and lipid profile in Korean adults

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kisok, E-mail: kimkisok@kmu.ac.kr [Department of Public Health, Keimyung University, 1000 Shindang-dong, Daegu 704-701 (Korea, Republic of)

    2012-01-15

    Although animal experiments have shown that cadmium exposure induces alterations in lipid profiles, no epidemiological study of this relationship has been performed. The objective of this study was to evaluate the association between blood cadmium concentration and blood lipid levels in Korean adults. A cross-sectional study comprising participants (n=3903) aged 20 years or older from the 2005, 2008, and 2009 Korea National Health and Nutrition Examination Surveys was conducted. Demographic characteristics and dietary intake were obtained from the participants by questionnaire, and cadmium and lipid levels were determined by analysis of blood samples. After adjusting for demographic and dietary factors, blood concentration of cadmium was positively associated with the risk of low high-density lipoprotein cholesterol (HDL-C) in a dose-dependent manner (p for trend <0.001). In addition, the odds ratios (ORs) of a high triglyceride to HDL-C ratio was significantly increased in the high blood cadmium groups [OR=1.36; 95% confidence interval (CI), 1.03-1.79 for fourth quintile and OR=1.41; 95% CI, 1.07-1.86 for fifth quintile] compared with the lowest quintile group. However, high blood cadmium was not associated with a risk of high total cholesterol, high low-density lipoprotein cholesterol, or high triglycerides. These data suggest that an increased cadmium body burden increases the risk of dyslipidemia, mainly due to the increased risk of low HDL-C and the high ratio of triglycerides to HDL-C.

  2. Surfactant recovery from water using foam fractionation

    Energy Technology Data Exchange (ETDEWEB)

    Tharapiwattananon, N.; Osuwan, S. [Chulalongkorn Univ., Bangkok (Thailand); Scamehorn, J.F. [Inst. of Oklahoma, Norman, OK (United States)] [and others

    1996-05-01

    The purpose of this study was to investigate the use of foam fractionation to recover surfactant from water. A simple continuous mode foam fractionation was used and three surfactants were studied (two anionic and one cationic). The effects of air flow rate, foam height, liquid height, liquid feed surfactant concentration, and sparger porosity were studied. This technique was shown to be effective in either surfactant recovery or the reduction of surfactant concentration in water to acceptable levels. As an example of the effectiveness of this technique, the cetylpyridinium chloride concentration in water can be reduced by 90% in one stage with a liquid residence time of 375 minutes. The surfactant concentration in the collapsed foam is 21.5 times the feed concentration. This cationic surfactant was easier to remove from water by foam fractionation than the anionic surfactants studied.

  3. Ambient NO2 concentration profiles in Flanders using passive sampling

    Directory of Open Access Journals (Sweden)

    Sanja Potgieter-Vermaak

    2008-09-01

    Full Text Available In most parts of Europe NO2 emissions from excessive road traffic, concentrated by confined spaces and limited dispersion, are often higher than the ambient guideline values. As a pollutant,NO2 has a number of adverse effects on human health and the environment. The European Union sets guideline and threshold values for various pollutants, to protect humans and the environment, of which NO2 is one. Flanders adopted these values as most countries did, and the monitoring and evaluation of the levels against these guideline values are mostly done by VMM (the Flemish Environmental Company. The air quality Framework Directive (96/62/EG was drafted on the27th of September 1996 and instituted on the 21st of November 1996. New guideline values forNO2 will come into effect in 2010 (1999/30/EG. The future hourly guideline value is 200 µg m-3which may not be exceeded more than 18 times in a calendar year. The average annual guideline value must not exceed 40 µg m-3.Currently various pollutants are continuously monitored by means of fixed monster monitors and analysers, where after data is extrapolated to give an overview of the dispersion. In the 2003annual report the future guideline value has been exceeded in 7 locations in Flanders. Moreover, in a separate study it was reported that in various locations with high traffic density and low dispersion, this value was exceeded, even though the dispersion model did not indicate it. Hence, to test these and other locations against the future guideline value a total of 19points, in 6 different cities and towns in Flanders, were chosen to monitor the NO2 profile over a1 year period. Passive sampling, averaged over periods of 2 weeks, was used and comparisons with the fixed monitors in some of these locations were possible. The future annual guideline value of 40 µg m-3 (2010 was exceeded in 11 of the 19 measured locations. When high traffic density was accompanied by low dispersion the value was at its

  4. Depth profiles of pulmonary surfactant protein B in phosphatidylcholine bilayers, studied by fluorescence and electron spin resonance spectroscopy

    DEFF Research Database (Denmark)

    Cruz, A; Casals, C; Plasencia, I

    1998-01-01

    . These differences in the extent of insertion lead to qualitative and quantitative differences in the effect of the protein on the mobility of the phospholipid acyl chains, as studied by spin-label electron spin resonance (ESR) spectroscopy, and could represent different functional stages in the surfactant cycle......Pulmonary surfactant-associated protein B (SP-B) has been isolated from porcine lungs and reconstituted in bilayers of dipalmitoylphosphatidylcholine (DPPC) or egg yolk phosphatidylcholine (PC) to characterize the extent of insertion of the protein into phospholipid bilayers. The parameters...... for the interaction of SP-B with DPPC or PC using different reconstitution protocols have been estimated from the changes induced in the fluorescence emission spectrum of the single protein tryptophan. All the different reconstituted SP-B-phospholipid preparations studied had similar Kd values for the binding...

  5. Influence of surfactant concentration on counter-ion induced solubility of poly(pyridine-2,5-diyl)

    Institute of Scientific and Technical Information of China (English)

    IMIT Mokhtar; YAMAMOTO Takakazu; IMIN Patigul

    2005-01-01

    Protonating the pyridine rings of poly(pyridine-2,5-diyl) with dodecybenzenesulfonic acid and camphorsulphonic acid produces polymer materials which can be dissolved in chloroform (in contrast to the unprotonated polymer, which can only be dissolved in strong acids such as formic acid) and allows mixing the protonated polymers with other chloroform soluble conjugated polymers for use in electronic devices. The protonating behavior of poly(pyridine-2,5-diyl) with two kinds of surfactants is different in some levels. Dodecybenzenesulfonic acid has higher protonating ability than camphorsulphonic acid.

  6. Interactions of phenol with cationic micelles of hexadecyltrimethylammonium bromide studied by titration calorimetry, conductimetry, and 1H NMR in the range of low additive and surfactant concentrations.

    Science.gov (United States)

    Chaghi, Radhouane; de Ménorval, Louis-Charles; Charnay, Clarence; Derrien, Gaëlle; Zajac, Jerzy

    2008-10-01

    Interactions of phenol (PhOH) with micellar aggregates of hexadecyltrimethylammonium bromide (HTAB) in aqueous solutions at surfactant concentrations close to the CMC and phenol contents of 1, 5, or 10 mmol kg(-1) have been investigated at 303 K by means of titration calorimetry, solution conductimetry, and (1)H NMR spectroscopy. Estimates of the main thermodynamic parameters related to HTAB micellization were made for PhOH/HTAB/H(2)O systems based on the specific conductivity measurements and calorimetric determination of the cumulative enthalpy of dilution as functions of the surfactant concentration at a fixed additive content. The combined analysis of the results obtained in H(2)O solutions pointed to the preferential location of PhOH in the outer micelle parts by an enthalpy-driven mechanism. Additional PhOH molecules were located increasingly deeper within the micelle core. The (1)H NMR study of PhOH solubilization by 1.5 mmol kg(-1) HTAB solutions in D(2)O indicated that the two categories of the solubilization site became saturated with the solubilizate already at the lowest additive content. Dissimilar amounts of the solubilized material in H(2)O and D(2)O solutions were ascribed to the difference in the initial micelle structures formed in the two solvents, as inferred from calorimetry and (1)H NMR studies of the HTAB micellization in D(2)O and H(2)O.

  7. New surfactant phosphine ligands and platinum(II) metallosurfactants. Influence of metal coordination on the critical micelle concentration and aggregation properties.

    Science.gov (United States)

    Parera, Elisabet; Comelles, Francesc; Barnadas, Ramon; Suades, Joan

    2010-01-19

    We have prepared the first platinum(II) metallosurfactants from a new family of linear surfactant phosphines Ph(2)P(CH(2))(n)SO(3)Na {1 (n = 2), 2 (n = 6), and 3 (n = 10)}, which were synthesized by reaction between the halosulfonates X(CH(2))(n)SO(3)Na and sodium diphenylphosphide. The metallosurfactants cis-[PtCl(2)L(2)] (L = 1-3) were obtained after reaction between the phosphines and PtCl(2) in dimethylsulfoxide. All compounds were fully characterized by the usual methods {NMR ((1)H, (13)C, (31)P, (195)Pt), IR, MS-ESI and HRMS}. By exploring the surfactant properties of phosphines 1-3 and their respective platinum metallosurfactants cis-[PtCl(2)L(2)] (L = 1-3) through surface tension measurements, dynamic light scattering spectroscopy, and cryo-TEM microscopy, we were able to analyze the influence of the metal coordination on the critical micelle concentration (cmc) and the aggregation properties. The cmc values of platinum metallosurfactants were considerably lower than those obtained for the free phosphines 1-3. This behavior could be understood by an analogy between the structure of cis-[PtCl(2)L(2)] complexes and bolaform surfactants. The calculated values of area per molecule also showed different tendencies between 1-3 and cis-[PtCl(2)L(2)] complexes, which could be explained on the basis of the possible conformations of these compounds in the air-water interface. The study of aggregates by dynamic light scattering spectroscopy and cryo-TEM microscopy showed the formation of spherical disperse medium size vesicles in all cases. However, substantial differences were observed between the three free phosphines (the population of micellar aggregates increased with long chain length) and also between phosphines and their respective metallosurfactants.

  8. Determination of lead in water resources by flame atomic absorption spectrometry after pre-concentration with ammonium pyrrolidinedithiocarbamate immobilized on surfactant-coated alumina

    Directory of Open Access Journals (Sweden)

    SAYED MORTEZA TALEBI

    2007-06-01

    Full Text Available Arapid, simple, and sensitive procedure based on modified solid phase extraction was developed for the pre-concentration and determination of trace amount of lead in water resources. Lead was reacted with ammonium pyrrolidinedithiocarbamate (APDC to make a complex. The complex was then collected in a column packed with surfactant-coated alumina. The parameters affecting the collection efficiency and desorption rate of the lead complexes from the column were investigated and optimized. The collection efficiency of the lead complex on the adsorbent was excellent under the optimized conditions. The results obtained from the recovery test showed the capability and reliability of the method for the analysis of trace amounts of lead. The proposed pre-concentration procedure made it possible to apply conventional flame atomic absorption spectrometry (FAAS for the sensitive determination of trace amounts of lead in water resources.

  9. Burying of channel optical waveguides: relation between near-field measurement and Ag concentration profile

    Science.gov (United States)

    Tsai, Wan-Shao; Liu, Yen-Huang; Barkman, Ondrej; Prajzler, Vaclav; Stanek, Stanislav; Nekvindova, Pavla

    2015-01-01

    Two-step field-assisted ion-exchanged waveguides have been fabricated on a glass substrate. The concentration profiles of the exchanged ions were measured with electron microprobe. The waveguides were characterized under scanning electron microscope and optical microscope for the investigation of burying structures. Guiding mode patterns were characterized with near-field measurement, where symmetric profiles were observed for the burying-type waveguide. The refractive index profiles were also measured with a modified end-fire coupling method. The relation between ion concentration profiles and index profiles were compared for the waveguides with different fabrication process.

  10. Morphology and photoluminescence of self-assembled CaWO4:Sm3+ microspheres: effect of pH and surfactant concentration

    Science.gov (United States)

    Ningombam, Goutam Singh; Nongmaithem, Rajmuhon Singh

    2017-03-01

    Self-assembled CaWO4:Sm3+ microspheres were prepared via surfactant (sodium dodecyl sulfate) mediated hydrothermal method. The effect of pH and the concentration of surfactant on the morphology and photoluminescence of the synthesized phosphors have been studied. Samples were characterized by X-ray diffractometry (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and photoluminescence spectroscopy. The microspheres were found to have an average size of 1-2 µm. They were mesoporous in nature and constituted of nanocrystals of about 10-30 nm dimension. The TEM images revealed the interlinking framework of the nano-sized constituents which consequently lead to the formation of mesoporous microspheres. The lowering of pH causes a slight reduction in the size of microspheres which could have been attributed to loss of OH from the nanoparticle surface and subsequent retardation in the adsorption of growing molecular CaWO4:Sm3+ units. Also, as pH increases, crystallinity decreases. The increase in amount of SDS reduced the crystallinity of the materials, destroyed the monodispersity of microspheres and lowered the luminescence output. It was found that lower pH and higher monodispersity of microspheres are quite favourable for high luminescence output.

  11. Simulation of nitrogen concentration depth profiles in low temperature nitrided stainless steel

    DEFF Research Database (Denmark)

    Christiansen, Thomas; Dahl, Kristian Vinter; Somers, Marcel A. J.

    2006-01-01

    A numerical model is presented, which simulates nitrogen concentration-depth profiles as obtained with low temperature gaseous nitriding of stainless steel. The evolution of the calculated nitrogen concentration-depth profiles is compared with experimental nitriding kinetics. It is shown that the...

  12. BINDING ISOTHERMS SURFACTANT-PROTEINS

    Directory of Open Access Journals (Sweden)

    Elena Irina Moater

    2011-12-01

    Full Text Available The interactions between surfactants and proteins shows some similarities with interactions between surfactants and polymers, but the hydrophobic amphoteric nature of proteins and their secondary and tertiary structure components make them different from conventional polymer systems. Many studies from the past about surfactant - proteins bonding used the dialysis techniques. Other techniques used to determine the binding isotherm, included ultrafiltration, ultracentrifugation, potentiometry, ion-selective electrode method and surface tension. High affinity isotherms which are typical of an anionic surfactant - protein bonding, exhibit an initial increase steep followed by a slow growth region and then a vertical growth above a certain concentration. This isotherm is typical of ionic surfactant to protein binding. Often the high affinity initial bond appears at very low concentrations of surfactant and therefore in some protein-surfactant systems, the exact shape of the isotherm in this region may be missing. The surfactant - protein binding is influenced by a number of variables such as the nature and chain length of surfactant, pH, ionic strength, temperature, nature of this protein and additives.

  13. Surfactant monitoring by foam generation

    Science.gov (United States)

    Mullen, Ken I.

    1997-01-01

    A device for monitoring the presence or absence of active surfactant or other surface active agents in a solution or flowing stream based on the formation of foam or bubbles is presented. The device detects the formation of foam with a light beam or conductivity measurement. The height or density of the foam can be correlated to the concentration of the active surfactant present.

  14. Evaluation of Clay and Fumed Silica Nanoparticles on Adsorption of Surfactant Polymer during Enhanced Oil Recovery

    National Research Council Canada - National Science Library

    Cheraghian, Goshtasp

    2017-01-01

    .... The effects of nano concentration on static adsorption of surfactant were investigated at variable condition polymer and surfactant concentration and nanoparticles are critical parameters influence...

  15. Surfactant analysis in oil-containing fluids

    Energy Technology Data Exchange (ETDEWEB)

    Gronsveld, J.; Faber, M.J. (Koninklijke Shell Exploratie en Produktie Laboratorium, Rijswijk (Netherlands))

    The total surfactant concentration in aqueous phase samples can be analysed with a potentiometric titration. In enhanced oil recovery research, however, the surfactant is produced not only in aqueous phase samples but also in oleic phase samples. The oleic constituents in the oliec phase samples interfere in the surfactant analysis and, therefore, the titration method has been adapted. (orig.).

  16. Surfactant adsorption to soil components and soils

    NARCIS (Netherlands)

    Ishiguro, Munehide; Koopal, Luuk K.

    2016-01-01

    Soils are complex and widely varying mixtures of organic matter and inorganic materials; adsorption of surfactants to soils is therefore related to the soil composition. We first discuss the properties of surfactants, including the critical micelle concentration (CMC) and surfactant adsorption on

  17. Interaction of nonionic surfactant AEO9 with ionic surfactants

    Institute of Scientific and Technical Information of China (English)

    ZHANG Zhi-guo; YIN Hong

    2005-01-01

    The interaction in two mixtures of a nonionic surfactant AEO9 (C12H25O(CH2CH2O)9H) and different ionic surfactants was investigated. The two mixtures were AEO9/sodium dodecyl sulfate (SDS) and AEO9/cetyltrimethylammonium bromide (CTAB) at molar fraction of AEO9, αAEO9 =0.5. The surface properties of the surfactants, critical micelle concentration (CMC),effectiveness of surface tension reduction (γCMC), maximum surface excess concentration (Гmax) and minimum area per molecule at the air/solution interface (Amin) were determined for both individual surfactants and their mixtures. The significant deviations from ideal behavior (attractive interactions) of the nonionic/ionic surfactant mixtures were determined. Mixtures of both AEO9/SDS and AEO9/CTAB exhibited synergism in surface tension reduction efficiency and mixed micelle formation, but neither exhibited synergism in surface tension reduction effectiveness.

  18. Switchable Surfactants

    National Research Council Canada - National Science Library

    Yingxin Liu; Philip G. Jessop; Michael Cunningham; Charles A. Eckert; Charles L. Liotta

    2006-01-01

    .... We report that long-chain alkyl amidine compounds can be reversibly transformed into charged surfactants by exposure to an atmosphere of carbon dioxide, thereby stabilizing water/alkane emulsions...

  19. Persurf, a new method to improve surfactant delivery: a study in surfactant depleted rats.

    Directory of Open Access Journals (Sweden)

    Wolfram Burkhardt

    Full Text Available PURPOSE: Exogenous surfactant is not very effective in adults with ARDS, since surfactant does not reach atelectatic alveoli. Perfluorocarbons (PFC can recruit atelectatic areas but do not replace impaired endogenous surfactant. A surfactant-PFC-mixture could combine benefits of both therapies. The aim of the proof-of-principal-study was to produce a PFC-in-surfactant emulsion (Persurf and to test in surfactant depleted Wistar rats whether Persurf achieves I. a more homogenous pulmonary distribution and II. a more homogenous recruitment of alveoli when compared with surfactant or PFC alone. METHODS: Three different PFC were mixed with surfactant and phospholipid concentration in the emulsion was measured. After surfactant depletion, animals either received 30 ml/kg of PF5080, 100 mg/kg of stained (green dye Curosurf™ or 30 ml/kg of Persurf. Lungs were fixated after 1 hour of ventilation and alveolar aeration and surfactant distribution was estimated by a stereological approach. RESULTS: Persurf contained 3 mg/ml phospholipids and was stable for more than 48 hours. Persurf-administration improved oxygenation. Histological evaluation revealed a more homogenous surfactant distribution and alveolar inflation when compared with surfactant treated animals. CONCLUSIONS: In surfactant depleted rats administration of PFC-in-surfactant emulsion leads to a more homogenous distribution and aeration of the lung than surfactant alone.

  20. Interaction of nonionic surfactant AEO9 with ionic surfactants*

    OpenAIRE

    2005-01-01

    The interaction in two mixtures of a nonionic surfactant AEO9 (C12H25O(CH2CH2O)9H) and different ionic surfactants was investigated. The two mixtures were AEO9/sodium dodecyl sulfate (SDS) and AEO9/cetyltrimethylammonium bromide (CTAB) at molar fraction of AEO9, α AEO9=0.5. The surface properties of the surfactants, critical micelle concentration (CMC), effectiveness of surface tension reduction (γ CMC), maximum surface excess concentration (Γ max) and minimum area per...

  1. Correlation between DNAPL distribution area and dissolved concentration in surfactant enhanced aquifer remediation effluent: a two-dimensional flow cell study

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Bin; Li, Huiying; Du, Xiaoming; Zhong, Lirong; Yang, Bin; Du, Ping; Gu, Qingbao; Li, Fasheng

    2016-02-01

    During the process of surfactant enhanced aquifer remediation (SEAR), free phase dense non-aqueous phase liquid (DNAPL) may be mobilized and spread. The understanding of the impact of DNAPL spreading on the SEAR remediation is not sufficient with its positive effect infrequently mentioned. To evaluate the correlation between DNAPL spreading and remediation efficiency, a two-dimensional sandbox apparatus was used to simulate the migration and dissolution process of 1,2-DCA (1,2-dichloroethane) DNAPL in SEAR. Distribution area of DNAPL in the sandbox was determined by digital image analysis and correlated with effluent DNAPL concentration. The results showed that the effluent DNAPL concentration has significant positive linear correlation with the DNAPL distribution area, indicating the mobilization of DNAPL could improve remediation efficiency by enlarging total NAPL-water interfacial area for mass transfer. Meanwhile, the vertical migration of 1,2-DCA was limited within the boundary of aquifer in all experiments, implying that by manipulating injection parameters in SEAR, optimal remediation efficiency can be reached while the risk of DNAPL vertical migration is minimized. This study provides a convenient visible and quantitative method for the optimization of parameters for SEAR project, and an approach of rapid predicting the extent of DNAPL contaminant distribution based on the dissolved DNAPL concentration in the extraction well.

  2. Correlation between DNAPL distribution area and dissolved concentration in surfactant enhanced aquifer remediation effluent: A two-dimensional flow cell study.

    Science.gov (United States)

    Wu, Bin; Li, Huiying; Du, Xiaoming; Zhong, Lirong; Yang, Bin; Du, Ping; Gu, Qingbao; Li, Fasheng

    2016-02-01

    During the process of surfactant enhanced aquifer remediation (SEAR), free phase dense non-aqueous phase liquid (DNAPL) may be mobilized and spread. The understanding of the impact of DNAPL spreading on the SEAR remediation is not sufficient with its positive effect infrequently mentioned. To evaluate the correlation between DNAPL spreading and remediation efficiency, a two-dimensional sandbox apparatus was used to simulate the migration and dissolution process of 1,2-DCA (1,2-dichloroethane) DNAPL in SEAR. Distribution area of DNAPL in the sandbox was determined by digital image analysis and correlated with effluent DNAPL concentration. The results showed that the effluent DNAPL concentration has significant positive linear correlation with the DNAPL distribution area, indicating the mobilization of DNAPL could improve remediation efficiency by enlarging total NAPL-water interfacial area for mass transfer. Meanwhile, the vertical migration of 1,2-DCA was limited within the boundary of aquifer in all experiments, implying that by manipulating injection parameters in SEAR, optimal remediation efficiency can be reached while the risk of DNAPL vertical migration is minimized. This study provides a convenient visible and quantitative method for the optimization of parameters for SEAR project, and an approach of rapid predicting the extent of DNAPL contaminant distribution based on the dissolved DNAPL concentration in the extraction well.

  3. Effect of asymmetric concentration profile on thermal conductivity in Ge/SiGe superlattices

    Energy Technology Data Exchange (ETDEWEB)

    Hahn, Konstanze R., E-mail: konstanze.hahn@dsf.unica.it [Department of Physics, University of Cagliari, Cittadella Universitaria, 09042 Monserrato (Italy); Cecchi, Stefano [Department of Epitaxy, Paul-Drude-Institut für Festkörperelektronik, Hausvogteiplatz 5-7, 10117 Berlin (Germany); Colombo, Luciano [Department of Physics, University of Cagliari, Cittadella Universitaria, 09042 Monserrato (Italy); Institut de Cieǹcia de Materials de Barcelona (ICMAB-CSIC), Campus UAB, Bellaterra, 08193 Barcelona (Spain); Catalan Institute of Nanoscience and Nanotechnology (ICN2), CSIC and The Barcelona Institute of Science and Technology, Campus UAB, Bellaterra, 08193 Barcelona (Spain)

    2016-05-16

    The effect of the chemical composition in Si/Ge-based superlattices on their thermal conductivity has been investigated using molecular dynamics simulations. Simulation cells of Ge/SiGe superlattices have been generated with different concentration profiles such that the Si concentration follows a step-like, a tooth-saw, a Gaussian, and a gamma-type function in direction of the heat flux. The step-like and tooth-saw profiles mimic ideally sharp interfaces, whereas Gaussian and gamma-type profiles are smooth functions imitating atomic diffusion at the interface as obtained experimentally. Symmetry effects have been investigated comparing the symmetric profiles of the step-like and the Gaussian function to the asymmetric profiles of the tooth-saw and the gamma-type function. At longer sample length and similar degree of interdiffusion, the thermal conductivity is found to be lower in asymmetric profiles. Furthermore, it is found that with smooth concentration profiles where atomic diffusion at the interface takes place the thermal conductivity is higher compared to systems with atomically sharp concentration profiles.

  4. Effect of asymmetric concentration profile on thermal conductivity in Ge/SiGe superlattices

    Science.gov (United States)

    Hahn, Konstanze R.; Cecchi, Stefano; Colombo, Luciano

    2016-05-01

    The effect of the chemical composition in Si/Ge-based superlattices on their thermal conductivity has been investigated using molecular dynamics simulations. Simulation cells of Ge/SiGe superlattices have been generated with different concentration profiles such that the Si concentration follows a step-like, a tooth-saw, a Gaussian, and a gamma-type function in direction of the heat flux. The step-like and tooth-saw profiles mimic ideally sharp interfaces, whereas Gaussian and gamma-type profiles are smooth functions imitating atomic diffusion at the interface as obtained experimentally. Symmetry effects have been investigated comparing the symmetric profiles of the step-like and the Gaussian function to the asymmetric profiles of the tooth-saw and the gamma-type function. At longer sample length and similar degree of interdiffusion, the thermal conductivity is found to be lower in asymmetric profiles. Furthermore, it is found that with smooth concentration profiles where atomic diffusion at the interface takes place the thermal conductivity is higher compared to systems with atomically sharp concentration profiles.

  5. Effects of Interactions Among Surfactants,Water and Oil on Equilibrium Configuration of Surfactant-Water-Oil Systems

    Institute of Scientific and Technical Information of China (English)

    YUAN Yin-quan; SUN Zhi-bo; XIE Yun; ZOU Xian-wu

    2004-01-01

    The distribution and configuration of surfactants at interface in surfactant-water-oil systems have been investigated using discontinuous molecular dynamic simulations. There exists a certain equilibrium concentration of surfactants at interface for the systems with certain interactions among surfactant, water and oil. The interface length and equilibrium morphology of the systems are dependent on the equilibrium concentration of surfactants at interface and the total amount of surfactants. The interaction strengths among surfactant, water and oil determine the equilibrium concentration of surfactants at interface. Three typical configurations of surfactants at interface have been observed: ① surfactant molecules are perpendicular to the interface and arranged closely; ② perpendicular to the interface and arranged at interval of two particles; ③ lie down in the interface partly.

  6. Development of novel sustained release matrix pellets of betahistine dihydrochloride: effect of lipophilic surfactants and co-surfactants.

    Science.gov (United States)

    Shamma, Rehab Nabil; Basalious, Emad B; Shoukri, Raguia

    2012-01-01

    Sustained release matrix pellets of the freely water soluble drug, betahistine dihydrochloride (BH), were prepared using freeze pelletization technique. Different waxes and lipids (cetyl alcohol, beeswax, glyceryl tripalmitate (GTP) and glyceryl tristearate) were evaluated for the preparation of matrix pellets. A D-optimal design was employed for the optimization and to explore the effect of drug loading (X(1)), concentration of lipophilic surfactant (X(2)), concentration of co-surfactant (X(3)) and wax type (X(4)) on the release extent of the drug from matrix pellets. The entrapment efficiency (Y(1)), pellet diameter (Y(2)), and the percentage drug released at given times were selected as dependent variables. Results revealed a significant impact of all independent variables on drug release from the formulated pellets. The lipophilic surfactant significantly increased both the entrapment efficiency and the in vitro drug release and significantly decreased the pellet size. The optimized BH-loaded pellets were composed of 19.95% drug loading, 9.95% Span(®) 80 (surfactant), 0.25% Capmul(®) (co-surfactant) using glyceryl tripalmitate as a matrix former. The release profiles of the drug from hard gelatin capsule containing optimized pellets equivalent to 32 mg BH was similar to that of target release model for once-daily administration based on similarity factor. It could be concluded that a promising once-daily capsule containing sustained release pellets of BH was successfully designed.

  7. Follicle profile and plasma gonadotropin concentration in pubertal female ponies

    Directory of Open Access Journals (Sweden)

    Nogueira G.P.

    2004-01-01

    Full Text Available Twelve female ponies were examined daily for 30 days and classified as ovulating (OV; N = 6; 197 ± 6 kg or prepubertal (PP; N = 6; 196 ± 9 kg. Follicles were detected by ultrasound and gonadotropins quantified by radioimmunoassay. The mean diameter of the largest follicles was significantly larger in OV (38 ± 1 mm than in PP (26 ± 2 mm but there was no difference between groups in the size of the second largest follicle. There were more small follicles (29 mm than the OV fillies. Follicle-stimulating hormone (FSH levels did not differ between groups but PP fillies had lower luteinizing hormone (LH peak (8 ± 1 ng/ml and basal (4 ± 0.5 ng/ml levels, lower peak magnitude (2 ± 0.2 ng/ml and period average (5 ± 0.6 ng/ml than OV fillies (32 ± 4.5, 8 ± 1.2, 17.1 ± 6, and 15 ± 2.3 ng/ml, respectively. The PP group, in contrast to the OV group, showed no relationship between FSH surge and follicle wave emergence. We conclude that an LH concentration higher than 8 ng/ml is needed for follicle growth to a preovulatory size. Wave emergence and FSH secretion seem to be independent events, probably due to an inhibitory neural system in these PP animals. PP fillies may provide a physiological model for the study of follicle wave emergence which apparently does not depend on gonadotropin levels.

  8. Apparent equilibration time required for surfactant-oil-water systems to emulsify into the morphology imposed by the formulation. Part 2: Effect of sec-butanol concentration and initial location.

    Science.gov (United States)

    Alvarez, Gabriela; Antón, Raquel; Marfisi, Shirley; Márquez, Laura; Salager, Jean-Louis

    2004-06-22

    Winsor type I equilibrated surfactant-oil-water (SOW) systems produce o/w emulsions upon stirring. However, if the surfactant is initially dissolved in the oil phase, the attained type after inmediate emulsification is usually w/o. If the SOW system is partially equilibrated, it could result in a normal o/w emulsion, as if it were fully equilibrated. The minimum contact time for that to happen, the so-called apparent equilibration time tAPE, was previously shown (Langmuir 2002, 18, 607) to strongly depend on formulation, surfactant molecular weight, and oil viscosity. The present report shows that it depends on alcohol concentration and location in the unequilibrated system.

  9. Direct Numerical Simulation of Insoluble Surfactant Effect on Turbulent Channel Bubbly Flows

    Science.gov (United States)

    Lu, Jiacai; Tryggvason, Gretar

    2016-11-01

    Direct Numerical Simulations (DNS) have been successfully used to obtain detailed data for turbulent channel bubbly flows. However, most of DNS that have been done so far remain problematic in comparing to most experiments. One of the major reasons is that real bubbly flows contain surfactants. The surfactants adhere to the interface, and produce an uneven distribution of the surfactant concentration due to the moving of bubbles and result in uneven surface tension over bubble surfaces. In this project, the effect of surfactants on the flow of many bubbles in an upward turbulent channel flow is studied by using of Direct Numerical Simulation with 3D Front-tracking method. The surfactant mass and the interfacial area are directly tracked in the method, and the surfactant mass remains conserved during the evolution. By using of different elasticity numbers in the non-linear equation of state which relates the surface tension to the surfactant concentration, the simulations show that the evolution of the turbulent channel bubbly flow are much different among the cases with contaminated bubbles and clean bubbles. Profiles of many parameters, such as streamwise velocity, shear stress and etc., are also compared at the statistically steady state for these cases. Research supported by DOE (CASL).

  10. Emulsion Polymerization of Etyl Acrylate: The Effect of Surfactant, Initiator Concentration and PolymerizationTechnique on Particle Size Distribution

    Directory of Open Access Journals (Sweden)

    Nitri Arinda

    2009-04-01

    Full Text Available Emulsion polymerization was conducted using ethyl acrylate monomer. Theeffect of sodium lauryl sulfate concentration, ammonium persulfate concentration, the various of polymerizationtechniques and feeding time to the conversion, particle size and its distribution were observed. The purpose of thisresearch is to obtain the optimum condition of ethyl acrylate homopolymer with particle size around 100 nm, to get theparticle size distribution monodisperse and to get solid content value of the experiment closed to its theoretical value.The optimum condition then could be applied in shell polymerization of core-shell polymers. The results of the researchshowed that semicontinuous technique obtained optimum sodium lauryl sulfate concentration at 20 CMC (criticalmicelle concentration and ammonium persulfate concentration is 3%. By using batch technique that the biggestparticle size is 123 nm with conversion 95.8% and monodisperse. The shorter of feeding time the more monomer ofethyl acrylate being polymerized, it is showed by the higher conversion up to 94.4% and the bigger particle size is107.9 nm.

  11. Interactions of Ovalbumin with Ionic Surfactants

    Institute of Scientific and Technical Information of China (English)

    GUO Xia; YAN Hui; GUO Rong

    2008-01-01

    The interactions of ovalbumin (OVA) with one anionic surfactant,sodium dodecyl sulfate (SDS),and two cationic surfactants,dodecyl trimethylammonium bromide (DTAB) and cetyl trimethylammonium bromide (CTAB),in water have been studied through fluorescence and UV-Vis spectroscopies and transmission electronic microscopy,combined with the measurement of conductivity.OVA can increase the critical micelle concentrations (cmc) of SDS and CTAB but has little effect on that of DTAB.The interaction between surfactant monomer and OVA is greater than that between surfactant micelles and OVA.Moreover,SDS can make OVA unfolded while cationic surfactants cannot.

  12. From the shape of the vertical profile of in vivo fluorescence to Chlorophyll-a concentration

    Science.gov (United States)

    Mignot, A.; Claustre, H.; D'Ortenzio, F.; Xing, X.; Poteau, A.; Ras, J.

    2011-08-01

    In vivo fluorescence of Chlorophyll-a (Chl-a) is a potentially useful property to study the vertical distribution of phytoplankton biomass. However the technique is presently not fully exploited as it should be, essentially because of the difficulties in converting the fluorescence signal into an accurate Chl-a concentration. These difficulties arise noticeably from natural variations in the Chl-a fluorescence relationship, which is under the control of community composition as well as of their nutrient and light status. As a consequence, although vertical profiles of fluorescence are likely the most recorded biological property in the open ocean, the corresponding large databases are underexploited. Here with the aim to convert a fluorescence profile into a Chl-a concentration profile, we test the hypothesis that the Chl-a concentration can be gathered from the sole knowledge of the shape of the fluorescence profile. We analyze a large dataset from 18 oceanographic cruises conducted in case-1 waters from the highly stratified hyperoligotrophic waters (surface Chl-a = 0.02 mg m-3) of the South Pacific Gyre to the eutrophic waters of the Benguela upwelling (surface Chl-a = 32 mg m-3) and including the very deep mixed waters in the North Atlantic (Mixed Layer Depth = 690 m). This dataset encompasses more than 700 vertical profiles of Chl-a fluorescence as well as accurate estimations of Chl-a by High Performance Liquid Chromatography (HPLC). Two typical fluorescence profiles are identified, the uniform profile, characterized by a homogeneous layer roughly corresponding to the mixed layer, and the non-uniform profile, characterized by the presence of a Deep Chlorophyll Maximum. Using appropriate mathematical parameterizations, a fluorescence profile is subsequently represented by 3 or 5 shape parameters for uniform or non-uniform profiles, respectively. For both situations, an empirical model is developed to predict the "true" Chl-a concentration from these shape

  13. From the shape of the vertical profile of in vivo fluorescence to Chlorophyll-a concentration

    Directory of Open Access Journals (Sweden)

    J. Ras

    2011-08-01

    Full Text Available In vivo fluorescence of Chlorophyll-a (Chl-a is a potentially useful property to study the vertical distribution of phytoplankton biomass. However the technique is presently not fully exploited as it should be, essentially because of the difficulties in converting the fluorescence signal into an accurate Chl-a concentration. These difficulties arise noticeably from natural variations in the Chl-a fluorescence relationship, which is under the control of community composition as well as of their nutrient and light status. As a consequence, although vertical profiles of fluorescence are likely the most recorded biological property in the open ocean, the corresponding large databases are underexploited. Here with the aim to convert a fluorescence profile into a Chl-a concentration profile, we test the hypothesis that the Chl-a concentration can be gathered from the sole knowledge of the shape of the fluorescence profile. We analyze a large dataset from 18 oceanographic cruises conducted in case-1 waters from the highly stratified hyperoligotrophic waters (surface Chl-a = 0.02 mg m−3 of the South Pacific Gyre to the eutrophic waters of the Benguela upwelling (surface Chl-a = 32 mg m−3 and including the very deep mixed waters in the North Atlantic (Mixed Layer Depth = 690 m. This dataset encompasses more than 700 vertical profiles of Chl-a fluorescence as well as accurate estimations of Chl-a by High Performance Liquid Chromatography (HPLC. Two typical fluorescence profiles are identified, the uniform profile, characterized by a homogeneous layer roughly corresponding to the mixed layer, and the non-uniform profile, characterized by the presence of a Deep Chlorophyll Maximum. Using appropriate mathematical parameterizations, a fluorescence profile is subsequently represented by 3 or 5 shape parameters for uniform or non-uniform profiles, respectively. For both situations, an empirical model is developed to predict the "true" Chl-a concentration

  14. In vivo confocal Raman microspectroscopy of the skin: Noninvasive determination of molecular concentration profiles

    NARCIS (Netherlands)

    P.J. Caspers (Peter); G.W. Lucassen (Gerald); E.A. Carter (Elizabeth); H.A. Bruining (Hajo); G.J. Puppels (Gerwin)

    2001-01-01

    textabstractConfocal Raman spectroscopy is introduced as a noninvasive in vivo optical method to measure molecular concentration profiles in the skin. It is shown how it can be applied to determine the water concentration in the stratum corneum as a function of distance to the skin surface, with a

  15. Synthesis of novel quaternary ammonium surfactants containing adamantane

    Institute of Scientific and Technical Information of China (English)

    Jian Wei Guo; Xing Zhong; Hua Zhu; Li Juan Feng; Ying De Cui

    2012-01-01

    A series of novel quaternary ammonium surfactants containing adamantane were designed and synthesized from 1-adamantanecarboxylic acid.The structures of target surfactants were confirmed by 1H NMR,elements analysis and FTIR.Surface properties of these surfactants were investigated.Due to the lipophilicity of adamantane,the critical micelle concentration (CMC) and C20 values of the synthesized quaternary ammonium surfactants are lower than that of conventional quaternary ammonium surfactants.

  16. MICROBIAL SURFACTANTS IN ENVIRONMENTAL TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    T. P. Pirog

    2015-08-01

    Full Text Available It was shown literature and own experimental data concerning the use of microbial surface active glycolipids (rhamno-, sophoro- and trehalose lipids and lipopeptides for water and soil purification from oil and other hydrocarbons, removing toxic heavy metals (Cu2+, Cd2+, Ni2+, Pb2+, degradation of complex pollution (oil and other hydrocarbons with heavy metals, and the role of microbial surfactants in phytoremediation processes. The factors that limit the use of microbial surfactants in environmental technologies are discussed. Thus, at certain concentrations biosurfactant can exhibit antimicrobial properties and inhibit microorganisms destructing xenobiotics. Microbial biodegradability of surfactants may also reduce the effectiveness of bioremediation. Development of effective technologies using microbial surfactants should include the following steps: monitoring of contaminated sites to determine the nature of pollution and analysis of the autochthonous microbiota; determining the mode of surfactant introduction (exogenous addition of stimulation of surfactant synthesis by autochthonous microbiota; establishing an optimal concentration of surfactant to prevent exhibition of antimicrobial properties and rapid biodegradation; research both in laboratory and field conditions.

  17. Probing the carrier concentration profiles in phosphorus-implanted germanium using infrared spectroscopic ellipsometry

    Science.gov (United States)

    D'Costa, Vijay Richard; Yeo, Yee-Chia

    2015-02-01

    Spectroscopic ellipsometry with photon energy in the 0.045-0.65 eV range was used to investigate germanium samples implanted with 30 keV phosphorus ions and annealed at 700 °C. The infrared response of implanted layers is dominated by free carrier absorption which is modeled using a Drude oscillator. The carrier concentration profiles were modeled using an error function, and compared with those obtained by electrochemical capacitance-voltage profiling and secondary ion mass spectrometry. In the flat region of the carrier concentration profile, average carrier concentration and mobility of 1.40 × 1019 cm-3 and 336 cm2V-1s-1, respectively, were obtained. A phosphorus diffusivity of ˜1.2 × 10-13 cm2/s was obtained. The mobility versus carrier concentration relationships obtained for the implanted samples are close to the empirical relationship for bulk Ge.

  18. Polyelectrolyte surfactant aggregates and their deposition on macroscopic surfaces

    CERN Document Server

    Voisin, D

    2002-01-01

    Oppositely charged surfactant and polyelectrolyte are present in hair shampoos and conditioners, together with particles (e.g. anti-dandruff agents for scalp) and droplets (e.g. silicone oil for the hair). These are normally formulated at high surfactant concentrations, beyond the flocculation region for the polyelectrolyte concentration used. However, on dilution with water, during application, flocs are formed which carry the particles and droplets to the scalp and hair. The addition of an anionic surfactant to an aqueous solution of cationic polyelectrolyte, at a given concentration, can lead to the formation of polyelectrolyte-surfactant 'particles', in which the surfactant 'binds' to the polyelectrolyte. This occurs from the critical association concentration (CAC), up to the surfactant concentration corresponding to maximum binding. Within this range of surfactant concentrations, the surfactant bound to the polyelectrolyte is thought to associate to form what might be termed 'internal micelles'. Each po...

  19. Anaerobic Biodegradation of Detergent Surfactants

    Directory of Open Access Journals (Sweden)

    Erich Jelen

    2009-03-01

    Full Text Available Detergent surfactantscan be found in wastewater in relevant concentrations. Most of them are known as ready degradable under aerobic conditions, as required by European legislation. Far fewer surfactants have been tested so far for biodegradability under anaerobic conditions. The natural environment is predominantly aerobic, but there are some environmental compartments such as river sediments, sub-surface soil layer and anaerobic sludge digesters of wastewater treatment plants which have strictly anaerobic conditions. This review gives an overview on anaerobic biodegradation processes, the methods for testing anaerobic biodegradability, and the anaerobic biodegradability of different detergent surfactant types (anionic, nonionic, cationic, amphoteric surfactants.

  20. Surfactant-soil interactions during surfactant-amended remediation of contaminated soils by hydrophobic organic compounds: a review.

    Science.gov (United States)

    Laha, Shonali; Tansel, Berrin; Ussawarujikulchai, Achara

    2009-01-01

    Surfactants are amphiphilic molecules that reduce aqueous surface tension and increase the solubility of hydrophobic organic compounds (HOCs). Surfactant-amended remediation of HOC-contaminated soils and aquifers has received significant attention as an effective treatment strategy - similar in concept to using soaps and detergents as washing agents to remove grease from soiled fabrics. The proposed mechanisms involved in surfactant-amended remediation include: lowering of interfacial tension, surfactant solubilization of HOCs, and the phase transfer of HOC from soil-sorbed to pseudo-aqueous phase. However, as with any proposed chemical countermeasures, there is a concern regarding the fate of the added surfactant. This review summarizes the current state of knowledge regarding nonionic micelle-forming surfactant sorption onto soil, and serves as an introduction to research on that topic. Surfactant sorption onto soil appears to increase with increasing surfactant concentration until the onset of micellization. Sorbed-phase surfactant may account for the majority of added surfactant in surfactant-amended remediation applications, and this may result in increased HOC partitioning onto soil until HOC solubilization by micellar phase surfactant successfully competes with increased HOC sorption on surfactant-modified soil. This review provides discussion of equilibrium partitioning theory to account for the distribution of HOCs between soil, aqueous phase, sorbed surfactant, and micellar surfactant phases, as well as recently developed models for surfactant sorption onto soil. HOC partitioning is characterized by apparent soil-water distribution coefficients in the presence of surfactant.

  1. Estimation of skin concentrations of topically applied lidocaine at each depth profile.

    Science.gov (United States)

    Oshizaka, Takeshi; Kikuchi, Keisuke; Kadhum, Wesam R; Todo, Hiroaki; Hatanaka, Tomomi; Wierzba, Konstanty; Sugibayashi, Kenji

    2014-11-20

    Skin concentrations of topically administered compounds need to be considered in order to evaluate their efficacies and toxicities. This study investigated the relationship between the skin permeation and concentrations of compounds, and also predicted the skin concentrations of these compounds using their permeation parameters. Full-thickness skin or stripped skin from pig ears was set on a vertical-type diffusion cell, and lidocaine (LID) solution was applied to the stratum corneum (SC) in order to determine in vitro skin permeability. Permeation parameters were obtained based on Fick's second law of diffusion. LID concentrations at each depth of the SC were measured using tape-stripping. Concentration-depth profiles were obtained from viable epidermis and dermis (VED) by analyzing horizontal sections. The corresponding skin concentration at each depth was calculated based on Fick's law using permeation parameters and then compared with the observed value. The steady state LID concentrations decreased linearly as the site became deeper in SC or VED. The calculated concentration-depth profiles of the SC and VED were almost identical to the observed profiles. The compound concentration at each depth could be easily predicted in the skin using diffusion equations and skin permeation data. Thus, this method was considered to be useful for promoting the efficient preparation of topically applied drugs and cosmetics.

  2. Silicone antifoam performance enhancement by nonionic surfactants in potato medium.

    Science.gov (United States)

    Christiano, Steven P; Fey, Kenneth C

    2003-01-01

    The ability of a silicone antifoam to retard foaming in a liquor prepared from potatoes is enhanced by the addition of ethoxylated nonionic surfactants. The enhancement is non-linear for surfactant concentration, with all 12 surfactants tested possessing a concentration at which foam heights strongly diminish, referred to as the surfactant critical antifoaming concentration (SCAFC). SCAFCs vary between surfactants, with lower values indicating better mass efficiency of antifoaming enhancement. SCAFCs decrease with degree of ethoxylation and decrease with the hydrophilic-lipophilic balance for ethoxylated nonionic surfactants. Surfactant addition produces a mixed water-surface layer containing surfactant and surface-active components in the potato medium. Surface tension reduction does not correlate well with antifoam performance enhancement. A model is proposed where surfactant adsorption promotes desorption of surface-active potato medium components from the water surface. At the SCAFC, desorption is not complete, yet the rate of bubble rupture is sufficiently enhanced to provide excellent foam control.

  3. Investigation of the surfactant type and concentration effect on the retention factors of glutathione and its analogues by micellar electrokinetic chromatography.

    Science.gov (United States)

    Kazarjan, Jana; Mahlapuu, Riina; Hansen, Mats; Soomets, Ursel; Kaljurand, Mihkel; Vaher, Merike

    2015-10-01

    In the present study, a micellar electrokinetic chromatographic method was used to determine the retention factors of hydrophilic monomeric and homodimeric forms of glutathione analogues. Ionic-liquid-based surfactant, 1-tetradecyl-3-methylimidazolium chloride, as well as cetyltrimethylammonium bromide and phosphate buffer (pH 7.4) were employed in the experiments. Since the studied peptides possess a negative charge under physiological conditions, it is expected that the peptides interact with the oppositely charged 1-tetradecyl-3-methylimidazolium chloride and cetyltrimethylammonium bromide micelles via hydrophobically assisted electrostatic forces. The dependence of the retention factor on the micellar concentration of 1-tetradecyl-3-methylimidazolium chloride and cetyltrimethylammonium bromide is nonlinear and the obtained curves converge to a limiting value. The retention factor values of GSH analogues were in the range of 0.36-2.22 for glutathione analogues and -1.21 to 0.37 for glutathione when 1-tetradecyl-3-methylimidazolium chloride was used. When cetyltrimethylammonium bromide was employed, the retention factor values were in the range of 0.27-2.17 for glutathione analogues and -1.22 to 0.06 for glutathione. If sodium dodecyl sulfate was used, the retention factor values of glutathione analogues with carnosine moiety were in the range of -1.54 to 0.38.

  4. Texture profile in processed cheese: influence of the use of milk protein concentrates and whey protein concentrates

    Directory of Open Access Journals (Sweden)

    Alisson Borges Souza

    2014-07-01

    Full Text Available The techno-functional properties of proteins related with the molecular characteristics are facilitated by partial unfolding of structures. From these interactions, the medium pH is presented as a major interferer in intensity and type of reaction that takes place. The intensity of denaturation and interaction of different proteins occur in different forms and intensity accordingly to the pH value of the medium in which they are located. This study aimed to verify the influence of interactions between whey protein concentrate/milk protein concentrate on the evolution of the texture profile of processed cheese at different pH values. We have analyzed samples of commercial whey protein concentrate (WPC and milk protein concentrate (MPC using 112.5g/kg processed cheese. The results were interpreted in terms of texture profile. It was also possible to optimize the different proportions of WPC and MPC, and pH value change the parameters of texture for creamy processed cheese and the pH was also an influencing factor in this optimization.

  5. Influence of different surfactants on the technological properties and in vivo ocular tolerability of lipid nanoparticles.

    Science.gov (United States)

    Leonardi, Antonio; Bucolo, Claudio; Romano, Giovanni Luca; Platania, Chiara Bianca Maria; Drago, Filippo; Puglisi, Giovanni; Pignatello, Rosario

    2014-08-15

    Addition of one or more surfactant agents is often necessary for the production of nanostructured lipid and polymeric systems. The removal of residual surfactants is a required step for technological and toxicological reasons, especially for peculiar applications, such as the ophthalmic field. This study was planned to assess the technological properties of some surfactants, commonly used for the production of lipid nanoparticles, as well as their ocular safety profile. Stable and small-size solid lipid nanoparticles were obtained using Dynasan(®) 114 as the lipid matrix and all the tested surfactants. However, from a toxicological point of view, the nanocarriers produced using Kolliphor(®) P188 were the most valuable, showing no irritant effect on the ocular surface up to the highest tested surfactant concentration (0.4%, w/v). The SLN produced using Cremophor(®) A25 and Lipoid(®) S100 were tolerated up to a surfactant concentration of 0.2% by weight, while for Tween(®) 80 and Kolliphor(®) HS 15 a maximum concentration of 0.05% can be considered totally not-irritant.

  6. Measuring and modeling suspended sediment concentration profiles in the surf zone

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Time-averaged suspended sediment concentration profiles across the surf zone were measured in a large-scale three-dimensional movable bed laboratory facility (LSTF:Large-scale Sediment Transport Facility). Sediment suspension under two different types of breaking waves, spilling and plunging breakers, was investigated. The magnitudes and shapes of the concentration profiles varied substantially at different locations across the surf zone, reflecting the different intensities of breaking-induced turbulence. Sediment sus- pension at the energetic plunging breaker-line was much more active, resulting in nearly homogeneous concentration profiles throughout most of the water column, as compared to the reminder of the surf zone and at the spilling breaker-line. Four suspended sediment concentration models were examined based on the LSTF data, including the mixing turbulence length approach, segment eddy viscosity model, breaking-induced wave-energy dissipation approach, and a combined breaking and turbulence length model developed by this study. Neglecting the breaking-induced turbulence and subsequent sediment mixing, suspended sediment concentration models failed to predict the across-shore variations of the sediment suspension, especially at the plunging breaker-line. Wave-energy dissipation rate provided an accurate method for estimating the intensity of turbulence generated by wave breaking. By incorporating the breaking-induced turbulence, the combined breaking and turbulence length model reproduced the across-shore variation of sediment suspension in the surf zone. The combined model reproduced the measured time-averaged suspended sediment concentration profiles reasonably well across the surf zone.

  7. Surfactant Adsorption: A Revised Physical Chemistry Lab

    Science.gov (United States)

    Bresler, Marc R.; Hagen, John P.

    2008-01-01

    Many physical chemistry lab courses include an experiment in which students measure surface tension as a function of surfactant concentration. In the traditional experiment, the data are fit to the Gibbs isotherm to determine the molar area for the surfactant, and the critical micelle concentration is used to calculate the Gibbs energy of micelle…

  8. Effect of Concentrated Pomegranate Juice Consumption on Glucose and Lipid Profile Concentrations in Type 2 Diabetic Patients

    Directory of Open Access Journals (Sweden)

    Ali Akbar Rashidi

    2013-06-01

    Full Text Available Background: Diabetes mellitus is one of the most important metabolic disorders worldwide. As regards the anti-diabetic effects in different parts of pomegranate fruit, this study was performed to determine the effects of concentrated pomegranate juice (CPJ consumption on blood glucose and lipid concentrations in type 2 diabetic patients. Materials and Methods: This quasi experimental study was performed on 55 diabetic patients, among patients referred to the Kashan Diabetes Center. Patients were divided into two groups: CPJ consumption and control. An anthropometric, medical and 24-hour food recall questioner was completed. Fasting blood sample before and after study was collected to measure glucose, HbA1c, TG, Chol, LDL and HDL. The patients consumed 45 g/day CPJ for 3 month. Control group did not received experiment. variables were measured at the end of the study again. Both groups received the same diet and physical activity advice during the study. Results: Cholesterol and LDL - cholesterol concentrations decreased in CPJ than control group but not significant (p>0.05. The mean glucose concentrations showed no significant change between CPJ group and control (p>0.05.Conclusion: concentrated pomegranate juice (CPJ consumption there are no effective on blood glucose and lipid profiles concentrations in type 2 diabetic patients.

  9. Detailed spatio-temporal solids concentration profiling during batch settling of activated sludge using a radiotracer.

    Science.gov (United States)

    De Clercq, Jeriffa; Jacobs, Filip; Kinnear, David J; Nopens, Ingmar; Dierckx, Rudi A; Defrancq, Jacques; Vanrolleghem, Peter A

    2005-05-01

    In building and tuning good settling models for secondary clarifiers of wastewater treatment plants, there is a need for measured continuous solids concentration profiles during batch settling. Conventional measuring techniques have difficulties in recording this kind of data, either because they are invasive, or because of the low solids concentration and/or solids density of activated sludge. This paper investigates a novel non-invasive measurement technique borrowed from nuclear medicine, using a solids radiotracer and gamma cameras, to obtain solids concentration profiles during the batch settling of activated sludge, in a pilot-scale column with a height of 1m. The technique does not disturb the settling process, does not alter the settling characteristics, gives profiles every minute and every few millimeters, and is capable of measuring in a range of 0-25 g/l with high accuracy. Dynamic solids concentration profile measurements were performed for sludges of different wastewater treatment plants, and at different initial concentrations. The results show a quantitative representation of the settling process, and reveal hindered and compression settling.

  10. Surfactant-enhanced cellulose nanocrystal Pickering emulsions.

    Science.gov (United States)

    Hu, Zhen; Ballinger, Sarah; Pelton, Robert; Cranston, Emily D

    2015-02-01

    The effect of surfactants on the properties of Pickering emulsions stabilized by cellulose nanocrystals (CNCs) was investigated. Electrophoretic mobility, interfacial tension, confocal microscopy and three-phase contact angle measurements were used to elucidate the interactions between anionic CNCs and cationic alkyl ammonium surfactants didecyldimethylammonium bromide (DMAB) and cetyltrimethylammonium bromide (CTAB). Both surfactants were found to adsorb onto CNCs with concentration-dependent morphology. At low concentrations, individual surfactant molecules adsorbed with alkyl tails pointing outward leading to hydrophobic CNCs. At higher concentrations, above the surfactant's apparent critical micelle concentration, surfactant aggregate morphologies on CNCs were inferred and the hydrophobicity of CNCs decreased. DMAB, which has two alkyl tails, rendered the CNCs more hydrophobic than CTAB which has only a single alkyl tail, at all surfactant concentrations. The change in CNC wettability from surfactant adsorption was directly linked to emulsion properties; adding surfactant increased the emulsion stability, decreased the droplet size, and controlled the internal phase of CNC Pickering emulsions. More specifically, a double transitional phase inversion, from oil-in-water to water-in-oil and back to oil-in-water, was observed for emulsions with CNCs and increasing amounts of DMAB (the more hydrophobic surfactant). With CNCs and CTAB, no phase inversion was induced. This work represents the first report of CNC Pickering emulsions with surfactants as well as the first CNC Pickering emulsions that can be phase inverted. The ability to surface modify CNCs in situ and tailor emulsions by adding surfactants may extend the potential of CNCs to new liquid formulations and extruded/spray-dried materials.

  11. Quantification of the advected CO2 concentration due to upstream surface fluxes in aircraft vertical profiles

    Science.gov (United States)

    Font, A.; Morguí, J.-A.; Curcoll, R.; Rodó, X.

    2009-04-01

    A model framework which couples the Lagrangian Particle Dispersion Model FLEXPART (LPDM) with the new global surface flux inversion CarbonTracker from NOAA-ESRL (2007B release) is used to quantify the advected CO2 concentration from outbound surface fluxes to measured vertical profiles carried out during different seasons in 2006 at La Muela site in Spain (LMU; 41.60°N, 1.1°W). The Lagrangian Particle Dispersion Model FLEXPART (LPDM) calculates the influence of surface CO2 fluxes upwind of the study area, allowing us to identify those sources or sink areas that strongly modify the CO2 content of air masses that arrives at different altitudes of measured profiles. CarbonTracker is a new assimilation system that informs of global carbon fluxes at 1°x1° at 3 hours resolution. Coupling LPDM results with surface fluxes allows assessing the net CO2 contribution of identified areas to measured concentrations along the profiles above a reference or background concentration. Furthermore, it allows the quantification of the percentage of each component flux (biospheric, anthropogenic and oceanic) to each vertical layer. At LMU, biospheric fluxes account ~70% of total CO2 advection; fossil fuel ~25%; and ~5% is attributed to the oceanic ones. By far, late spring and summer profiles are largely influence by the biospheric component (~90%). Finally, the CO2 concentration above the background value of profiles measured on 22nd February, 13th October and 30th November 2006 are well explained by the advection of upstream surface fluxes. In other profiles examined, the variation of CO2 along the profile is partially explained by the advection of CO2 outbound fluxes.

  12. Using biologically soft surfactants for dust suppression

    Energy Technology Data Exchange (ETDEWEB)

    Tkachenko, N.G.; Kolodiichak, V.K.; Motrii, A.E.; Severin, V.D.

    1982-07-01

    This article discusses environmental aspects of using surfactants in coal mines for dust suppression. Surfactants for underground black coal mines in the USSR are divided into three classes: so-called soft surfactants with a decomposition period from 1 to 3 days, hard surfactants with decomposition exceeding a month and an intermediary group. The decomposition process is analyzed; the role played by fermentation is stressed. Environmental effects of surfactant decomposition are evaluated. Selected surfactants tested in Soviet laboratories are described. The results of experimental use of diethanolamide as a surfactant for water injection in coal seams are evaluated. Wetting time amounts to 1 s when a 0.2% concentration is used. When surfactant concentration in water is reduced to 0.05% wetting time does not change; when concentration decreases to 0.025% wetting time increases to 3 s. Surfactant efficiency is investigated under operational conditions in a Donbass mine. Specifications of the working face, mining system and air pollution caused by a shearer loader are discussed. When diethanolamide is used dust suppression efficiency ranges from 86.4 to 90.4%. During the tests diethanolamide concentration in water was 0.05%.

  13. Electrokinetic investigation of surfactant adsorption.

    Science.gov (United States)

    Bellmann, C; Synytska, A; Caspari, A; Drechsler, A; Grundke, K

    2007-05-15

    Fuerstenau [D.W. Fuerstenau, in: M.L. Hair (Ed.), Dekker, New York, 1971, p. 143] has already discussed the role of hydrocarbon chain of surfactants, the effect of alkyl chain length, chain structure and the pH of the solution on the adsorption process of surfactants. Later Kosmulski [M. Kosmulski, Chemical Properties of Material Surfaces, Surfactant Science Series, vol. 102, Dekker, New York, Basel, 2001] included the effect of surfactant concentration, equilibration time, temperature and electrolyte in his approaches. Certainly, the character of the head groups of the surfactant and the properties of the adsorbent surface are the basis for the adsorption process. Different surfactants and adsorbents cause different adsorption mechanisms described firstly by Rosen [M.J. Rosen, Surfactants and Interfacial Phenomena, second ed., Wiley, New York, 1989]. These adsorption mechanisms and their influencing factors were studied by electrokinetic investigations. Here only changes of the charges at the surfaces could be detected. To control the results of electrokinetic investigations they were compared with results from ellipsometric measurements. In the case of surfactant adsorption the chain length was vitally important. It could be shown by the adsorption of alkyl trimethyl ammonium bromides onto polymer films spin coated at wafer surfaces. The influence of the chain length depending on surface properties of the polymer film was studied. Streaming potential measurements were applied for these investigations. The obtained results enabled us to calculate the molar cohesive free energy per mol of CH2-group in the alkaline chain of the surfactant if all other specific adsorption effects were neglected.

  14. Effect of Impurity Concentration on the Depth Profile of the Electric Field within Monolayer Thin Film

    Directory of Open Access Journals (Sweden)

    N.F. Habubi

    2012-06-01

    Full Text Available The effect of impurity concentration ratios on the depth profile of electric field within monolayer film is presented. SnO2 monolayer thin film material was prepared and doped with Co using spray chemical pyrolysis. The concentration ratios of impurity were 1 %, 3 %, 5 % and 7 %. The analysis utilizes matrix formulas based on Abele's formulas from the calculation of reflectance and transmittance. Present study gives an information to contamination sensitivity in optical coating issue.

  15. MultiDark simulations: the story of dark matter halo concentrations and density profiles

    Science.gov (United States)

    Klypin, Anatoly; Yepes, Gustavo; Gottlöber, Stefan; Prada, Francisco; Heß, Steffen

    2016-04-01

    Predicting structural properties of dark matter haloes is one of the fundamental goals of modern cosmology. We use the suite of MultiDark cosmological simulations to study the evolution of dark matter halo density profiles, concentrations, and velocity anisotropies. We find that in order to understand the structure of dark matter haloes and to make 1-2 per cent accurate predictions for density profiles, one needs to realize that halo concentration is more complex than the ratio of the virial radius to the core radius in the Navarro-Frenk-White (NFW) profile. For massive haloes, the average density profile is far from the NFW shape and the concentration is defined by both the core radius and the shape parameter α in the Einasto approximation. We show that haloes progress through three stages of evolution. They start as rare density peaks and experience fast and nearly radial infall that brings mass closer to the centre, producing a highly concentrated halo. Here, the halo concentration increases with increasing halo mass and the concentration is defined by the α parameter with a nearly constant core radius. Later haloes slide into the plateau regime where the accretion becomes less radial, but frequent mergers still affect even the central region. At this stage, the concentration does not depend on halo mass. Once the rate of accretion and merging slows down, haloes move into the domain of declining concentration-mass relation because new accretion piles up mass close to the virial radius while the core radius is staying constant. Accurate analytical fits are provided.

  16. Improved oil production using economical biopolymer-surfactant blends for profile modification and mobility control. Final report, November 1998

    Energy Technology Data Exchange (ETDEWEB)

    Gabitto, J. [Prairie View A and M Univ., TX (United States); Barrufet, M.A.; Burnett, D.B. [Texas A and M Univ., College Station, TX (United States)

    1998-12-01

    In the past, starch hydrocolloids have not been effective alternates to partially hydrolyzed polyacrylamides, copolymers, and xanthan gum polymers as water shutoff agents in fractures and in matrix flow configurations. Poor injectivity and questionable stability have usually prevented their use in profile control applications. However, in recent years, the demands of the oil and gas drilling industry have led to the development of new drilling, drill-in, and completion fluids with improved functionality. New types of modified starches have contributed to these new drill in fluid (DIF) products. It was felt that the properties of the new products would lend themselves to applications in improved recovery. The objective of this project has been to evaluate the use of agricultural starch biopolymers for gelled and polymer applications in oil recovery processes. The authors believe that there is great potential for finding new functional starch products because of their chemical and structural flexibility, low cost, and wide availability. The goals of this project have been, therefore, to systematically investigate how the physical properties and chemical composition of relatively inexpensive agricultural starch products will influence their use as effective selective permeability control agents or as gels for water shut-off.

  17. Analysis of influence of atmosphere extinction to Raman lidar monitoring CO2 concentration profile

    Institute of Scientific and Technical Information of China (English)

    Zhao Pei-Tao; Zhang Yin-Chao; Wang Lian; Zhao Yue-Feng; Su Jia; Fang Xin; Cao Kai-Fa; Xie Jun; Du Xiao-Yong

    2007-01-01

    Lidar (Light detection and ranging) system monitoring of the atmosphere is a novel and powerful technique tool. The Raman lidar is well established today as a leading research tool in the study of numerous important areas in the atmospheric sciences. In this paper, the principle of Raman lidar technique measurement CO2 concentration profile is presented and the errors caused by molecular and aerosol extinction for CO2 concentration profile measurement with Raman lidar are also presented. The standard atmosphere extinction profile and 'real-time' Hefei area extinction profile are used to conduct correction and the corresponding results are yielded. Simulation results with standard atmosphere mode correction indicate that the errors caused by molecule and aerosol extinction should be counted for the reason that they could reach about 8 ppm and 5 ppm respectively. The relative error caused by Hefei area extinction correction could reach about 6%. The errors caused by the two components extinction influence could produce significant changes for CO2 concentration profile and need to be counted in data processing which could improve the measurement accuracies.

  18. Predicting suspended sand concentration profiles on a macro-tidal beach

    Science.gov (United States)

    Vincent, C. E.; Osborne, P. D.

    1995-11-01

    Suspended sand concentration profiles were measured using acoustic backscatter on a macro-tidal beach at Whitsand Bay, Cornwall, U.K. over a period of 9 days when wave heights were generally between 0.75 m and 0.25 m and wave periods from 5 to 7 s. Average profiles over periods of 6 or 14 min were dominantly of the vortex type, reflecting the importance of steep bedforms in maintaining the suspended sand profile. Bedform dimensions spanned the range between those occurring under regular laboratory waves and those observed under field conditions [ Nielsen, 1981 ( Journal of Geophysical Research, 86, 6467-6472)]. The concentration profiles can be defined by a mixing height zh and a near-bed concentration C0, in this case the concentration at 2 cm above the sea bed. There was considerable variability in zh resulting from the irregular spacing of the bedforms [Osborne and Vincent, 1994 ( Marine Geology, 115, 207-226)], but zh showed a significant dependence on the bed friction defined through the Shields number θ' max based on the skin friction. The variation in the near bed concentration was observed to be only weakly dependent on the excess skin friction at the bed, supporting earlier observations that the resuspension parameter γ 0 [ Smith and McLean, 1977 (in: Bottom turbulence, Elsevier, New York, pp. 123-152)] decreased rapidly as the excess skin friction increased. We conclude that a mixing height given by zh = 2.2 exp (3.05θ' max) and a reference concentration at 2 cm defined using γ 0 = 5.25 × 10 -6 (θ' max) -1.64 was appropriate to predict the mean vertical suspension profile on this macro-tidal beach for a wide range of low wave conditions.

  19. Influence of particles shape on the vertical profile of blowing snow concentration

    Science.gov (United States)

    Vionnet, Vincent; Trouvilliez, Alexandre; Naaim-Bouvet, Florence; Guyomarc'h, Gilbert

    2013-04-01

    In alpine regions, blowing snow events strongly influence the temporal and spatial evolution of the snow cover throughout the winter season. In Antarctica, blowing snow is an essential surface mass balance process and plays a non-negligible role in the annual accumulation. The vertical profile of blowing snow concentration determines the quantity of snow transported in turbulent suspension. A power law is often used to represent this vertical profile. It serves as an analytical solution representing an equilibrium between vertical turbulent diffusion and gravitational settling. In this work, we study how the exponent of the power law depends on the type of transported particles. Vertical profiles of blowing snow concentration have been collected at the experimental site of Col du Lac Blanc (French Alps) in 2011 and 2012 and near the research station of Cap Prud'homme (Antarctica) in 2010 and 2011. We used mechanical gauges (butterfly nets) and optical devices (Snow Particles Counters). Profiles collected during blowing snow events with precipitation have been corrected to account for the contribution of snowfall. Results show that profiles collected during blowing snow without snowfall differ from the corrected profiles collected during snowfall. At a given wind speed, particles transported during snowfall have a lower settling velocity than particles transported without snowfall. This difference confirms earlier observations (Takahashi, 1985) and can be explained by the change of drag coefficient between dendritic and rounded particles. This difference pertains several hours after the end of the snowfall illustrating the fragmentation of snow grains during blowing snow events.

  20. Water with low concentration of surfactant in dispersed solvent-assisted emulsion dispersive liquid-liquid microextraction for the determination of fungicides in wine.

    Science.gov (United States)

    Tseng, Wan-Chi; Chu, Shang-Ping; Kong, Po-Hsin; Huang, Chun-Kai; Chen, Jung-Hsuan; Chen, Pai-Shan; Huang, Shang-Da

    2014-09-17

    A sample preparation method, dispersive liquid-liquid microextraction assisted by an emulsion with low concentration of a surfactant in water and dispersed solvent coupled with gas chromatography-mass spectrometry, was developed for the analysis of the fungicides cyprodinil, procymidone, fludioxonil, flusilazole, benalaxyl, and tebuconazole in wine. A microsyringe was used to withdraw and discharge a mixture of extraction solvent and 240 μL of an aqueous solution of Triton X-100 (the dispersed agent) four times within 10 s to form a cloudy emulsion in the syringe. This emulsion was then injected into a 5 mL wine sample spiked with all of the above fungicides. The total extraction time was approximately 0.5 min. Under optimum conditions using 1-octanol (12 μL) as extraction solvent, the linear range of the method in analysis of all six fungicides was 0.05-100 μg L(-1), and the limit of detection ranged from 0.013 to 0.155 μg L(-1). The absolute recoveries (n = 3) and relative recoveries (n = 3) were 30-83 and 81-108% for white wine at 0.5, 5, and 5 μg L(-1), and 30-92 and 81-110% for red wine, respectively. The intraday (n = 7) and interday (n = 6) relative standard deviations ranged from 4.4 to 8.8% and from 4.3 to 11.2% at 0.5 μg L(-1), respectively. The method achieved high enrichment factors. It is an alternative sample preparation technique with good performance.

  1. Solubilization of Hydrophobic Dyes in Surfactant Solutions

    Directory of Open Access Journals (Sweden)

    Ali Reza Tehrani-Bagha

    2013-02-01

    Full Text Available In this paper, the use of surfactants for solubilization of hydrophobic organic dyes (mainly solvent and disperse dyes has been reviewed. The effect of parameters such as the chemical structures of the surfactant and the dye, addition of salt and of polyelectrolytes, pH, and temperature on dye solubilization has been discussed. Surfactant self-assemble into micelles in aqueous solution and below the concentration where this occurs—the critical micelle concentration (CMC—there is no solubilization. Above the CMC, the amount of solubilized dye increases linearly with the increase in surfactant concentration. It is demonstrated that different surfactants work best for different dyes. In general, nonionic surfactants have higher solubilization power than anionic and cationic surfactants. It is likely that the reason for the good performance of nonionic surfactants is that they allow dyes to be accommodated not only in the inner, hydrocarbon part of the micelle but also in the headgroup shell. It is demonstrated that the location of a dye in a surfactant micelle can be assessed from the absorption spectrum of the dye-containing micellar solution.

  2. Modeling atmospheric CO2 concentration profiles and fluxes above sloping terrain at a boreal site

    Directory of Open Access Journals (Sweden)

    T. Aalto

    2006-01-01

    Full Text Available CO2 fluxes and concentrations were simulated in the planetary boundary layer above subarctic hilly terrain using a three dimensional model. The model solves the transport equations in the local scale and includes a vegetation sub-model. A WMO/GAW background concentration measurement site and an ecosystem flux measurement site are located inside the modeled region at a hilltop and above a mixed boreal forest, respectively. According to model results, the concentration measurement at the hill site was representative for continental background. However, this was not the case for the whole model domain. Concentration at few meters above active vegetation represented mainly local variation. Local variation became inseparable from the regional signal at about 60-100 m above ground. Flow over hills changed profiles of environmental variables and height of inversion layer, however CO2 profiles were more affected by upwind land use than topography. The hill site was above boundary layer during night and inside boundary layer during daytime. The CO2 input from model lateral boundaries dominated in both cases. Daily variation in the CO2 assimilation rate was clearly seen in the CO2 profiles. Concentration difference between the hill site and the forest site was about 5ppm during afternoon according to both model and measurements. The average modeled flux to the whole model region was about 40% of measured and modeled local flux at the forest site.

  3. Measuring and modeling suspended sediment concentration profiles in the surf zone

    Directory of Open Access Journals (Sweden)

    Ping Wang

    2012-10-01

    Full Text Available Time-averaged suspended sediment concentration profiles across the surf zone were measured in a large-scale three-dimensional movable bed laboratory facility (LSTF: Large-scale Sediment Transport Facility. Sediment suspension under two different types of breaking waves, spilling and plunging breakers, was investigated. The magnitudes and shapes of the concentration profiles varied substantially at different locations across the surf zone, reflecting the different intensities of breaking-induced turbulence. Sediment suspension at the energetic plunging breaker-line was much more active, resulting in nearly homogeneous concentration profiles throughout most of the water column, as compared to the reminder of the surf zone and at the spilling breaker-line. Four suspended sediment concentration models were examined based on the LSTF data, including the mixing turbulence length approach, segment eddy viscosity model, breaking-induced wave-energy dissipation approach, and a combined breaking and turbulence length model developed by this study. Neglecting the breaking-induced turbulence and subsequent sediment mixing, suspended sediment concentration models failed to predict the across-shore variations of the sediment suspension, especially at the plunging breaker-line. Wave-energy dissipation rate provided an accurate method for estimating the intensity of turbulence generated by wave breaking. By incorporating the breaking-induced turbulence, the combined breaking and turbulence length model reproduced the across-shore variation of sediment suspension in the surf zone. The combined model reproduced the measured time-averaged suspended sediment concentration profiles reasonably well across the surf zone.

  4. MultiDark simulations: the story of dark matter halo concentrations and density profiles

    CERN Document Server

    Klypin, Anatoly; Gottlober, Stefan; Prada, Francisco; Hess, Steffen

    2014-01-01

    Accurately predicting structural properties of dark matter halos is one of the fundamental goals of modern cosmology. We use the new suite of MultiDark cosmological simulations to study the evolution of dark matter halo density profiles, concentrations, and velocity anisotropies. The MultiDark simulations cover a large range of masses 1e10-1e15Msun and volumes upto 50Gpc**3. The total number of dark matter halos in all the simulations exceeds 60 billion. We find that in order to understand the structure of dark matter halos and to make ~1% accurate predictions for density profiles, one needs to realize that halo concentration is more complex than the traditional ratio of the virial radius to the core radius in the NFW profile. For massive halos the averge density profile is far from the NFW shape and the concentration is defined by both the core radius and the shape parameter alpha in the Einasto approximation. Combining results from different redshifts, masses and cosmologies, we show that halos progress thr...

  5. Associations between Serum Sex Hormone Concentrations and Whole Blood Gene Expression Profiles in the General Population.

    Directory of Open Access Journals (Sweden)

    Robin Haring

    Full Text Available Despite observational evidence from epidemiological and clinical studies associating sex hormones with various cardiometabolic risk factors or diseases, pathophysiological explanations are sparse to date. To reveal putative functional insights, we analyzed associations between sex hormone levels and whole blood gene expression profiles.We used data of 991 individuals from the population-based Study of Health in Pomerania (SHIP-TREND with whole blood gene expression levels determined by array-based transcriptional profiling and serum concentrations of total testosterone (TT, sex hormone-binding globulin (SHBG, free testosterone (free T, dehydroepiandrosterone sulfate (DHEAS, androstenedione (AD, estradiol (E2, and estrone (E1 measured by liquid chromatography-tandem mass spectrometry (LC-MS/MS and immunoassay. Associations between sex hormone concentrations and gene expression profiles were analyzed using sex-specific regression models adjusted for age, body mass index, and technical covariables.In men, positive correlations were detected between AD and DDIT4 mRNA levels, as well as between SHBG and the mRNA levels of RPIA, RIOK3, GYPB, BPGM, and RAB2B. No additional significant associations were observed.Besides the associations between AD and DDIT4 expression and SHBG and the transcript levels of RPIA, RIOK3, GYPB, BPGM, and RAB2B, the present study did not indicate any association between sex hormone concentrations and whole blood gene expression profiles in men and women from the general population.

  6. Concentration profile of jet gas in the feed injection zone of a FCC riser

    Institute of Scientific and Technical Information of China (English)

    Chenglin E; Yiping Fan; Kai Zhang; Hu Zhang

    2008-01-01

    The concentration profiles of jet gas are investigated in the feed injection zone of a cold-model FCC riser by using a hydrogen trace technique.Experimental results demonstrate that four types of jet gas concentration profiles can be used to describe the mixing between the jet gas and pre-lift gas in the feed injection zone.The four types are a distinct M-shaped profile for weak mixing,an indistinct Mshaped profile for medium mixing,a sharp profile for strong mixing,and a parabolic profile for full mixing.The heights for regions of initial and full mixing reduce when decreasing the jet gas velocity or increasing the pre-lift gas velocity.Furthermore,the momentum ratio,Mj/Mr,(where Mj is the momentum of jet gas,Mr is the mixture momentum of pre-lift gas and solid particles) is introduced to describe the effects of gas-solid physical properties,operating conditions,and equipment configuration on the jet gas concentration distribution.The heights for regions of initial and full mixing between jet gas and pre-lift gas are found to be 0-0.375 and 0.375-0.675 m when Mj/Mr < 0.29,0.375-0.675 and 1.075-1.375 m when Mj/Mr > 0.54,and 0-0.375 and 0,675--1.075 m when Mj/Mr between 0.29 and 0.54,respectively.

  7. Development of a sublation system in atmospheric tank using sunflower oil surfactant to reduce oily water concentration; Desenvolvimento de um sistema de sublacao em tanque atmosferico utilizando tensoativo de oleo de girassol para reducao da concentracao de aguas oleosas

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Rodrigo F. de; Dantas, Iuri A.C.; Quintaes, Filipe de O.; Salazar, Andres O.; Barros Neto, Eduardo L. de [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil)

    2008-07-01

    In order to reduce the rate of oil in water, was developed a system capable to be inserted in a tank and make air bubbles move to top of the tank, where is a layer of oil, similar that occurs in flotation, but in this case is called sublation. This system is composed by drilled PVC pipes and connected in way of four identical squares, joined by a high pressure hose. A compressor located in a region near to the tank supplies air to the system through the hose, that is connected in the central point of the system. The preliminary results had shown that the concentration after the sublation, without the surfactants use, decrease of 70 ppm to 35 ppm. After the sublation using surfactants this concentration decrease of 70ppm to 24,8 ppm. The efficiency of the sublation process using surfactants made of vegetal oil - OGS - was proved by the experimental results. This process, beyond allowing a bigger reutilization of the water in the tests of the laboratory, makes possible the reduction of the rate of oil in water to permitted levels by CONAMA. (author)

  8. Development of a sublation system in atmospheric tank using sunflower oil surfactant to reduce oily water concentration; Desenvolvimento de um sistema de sublacao em tanque atmosferico utilizando tensoativo de oleo de girassol para reducao da concentracao de aguas oleosas

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Rodrigo F. de; Dantas, Iuri A.C.; Quintaes, Filipe de O.; Salazar, Andres O.; Barros Neto, Eduardo L. de [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil)

    2008-07-01

    In order to reduce the rate of oil in water, was developed a system capable to be inserted in a tank and make air bubbles move to top of the tank, where is a layer of oil, similar that occurs in flotation, but in this case is called sublation. This system is composed by drilled PVC pipes and connected in way of four identical squares, joined by a high pressure hose. A compressor located in a region near to the tank supplies air to the system through the hose, that is connected in the central point of the system. The preliminary results had shown that the concentration after the sublation, without the surfactants use, decrease of 70 ppm to 35 ppm. After the sublation using surfactants this concentration decrease of 70ppm to 24,8 ppm. The efficiency of the sublation process using surfactants made of vegetal oil - OGS - was proved by the experimental results. This process, beyond allowing a bigger reutilization of the water in the tests of the laboratory, makes possible the reduction of the rate of oil in water to permitted levels by CONAMA. (author)

  9. Effects of Alloying Elements on the Concentration Profile of Equilibrium Phases in Transformation Induced Plasticity Steel

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    With the two sublattices model, equilibrium compositions of ferrite (α) and austenite (γ) phases, as well as thevolume percent of austenite (γ) in different TRIP steels are calculated. Concentration profiles of carbon, manganese,aluminum and silicon in these steels are also estimated under the lattice fixed frame of reference so as to identifyif the equilibrium state is obtained. Through the comparison between the profiles after different time diffusion, thedistribution of elements in phases is exhibited and the complex effect due to the mutual interaction of the elementson diffusion is discussed.

  10. Characterizing contaminant concentrations with depth by using the USGS well profiler in Oklahoma, 2003-9

    Science.gov (United States)

    Smith, S. Jerrod; Becker, Carol J.

    2011-01-01

    Since 2003, the U.S. Geological Survey (USGS) Oklahoma Water Science Center has been using the USGS well profiler to characterize changes in water contribution and contaminant concentrations with depth in pumping public-supply wells in selected aquifers. The tools and methods associated with the well profiler, which were first developed by the USGS California Water Science Center, have been used to investigate common problems such as saline water intrusion in high-yield irrigation wells and metals contamination in high-yield public-supply wells.

  11. Remediation using trace element humate surfactant

    Energy Technology Data Exchange (ETDEWEB)

    Riddle, Catherine Lynn; Taylor, Steven Cheney; Bruhn, Debra Fox

    2016-08-30

    A method of remediation at a remediation site having one or more undesirable conditions in which one or more soil characteristics, preferably soil pH and/or elemental concentrations, are measured at a remediation site. A trace element humate surfactant composition is prepared comprising a humate solution, element solution and at least one surfactant. The prepared trace element humate surfactant composition is then dispensed onto the remediation site whereby the trace element humate surfactant composition will reduce the amount of undesirable compounds by promoting growth of native species activity. By promoting native species activity, remediation occurs quickly and environmental impact is minimal.

  12. A Review on Progress in QSPR Studies for Surfactants

    Directory of Open Access Journals (Sweden)

    Zhengwu Wang

    2010-03-01

    Full Text Available This paper presents a review on recent progress in quantitative structure-property relationship (QSPR studies of surfactants and applications of various molecular descriptors. QSPR studies on critical micelle concentration (cmc and surface tension (γ of surfactants are introduced. Studies on charge distribution in ionic surfactants by quantum chemical calculations and its effects on the structures and properties of the colloids of surfactants are also reviewed. The trends of QSPR studies on cloud point (for nonionic surfactants, biodegradation potential and some other properties of surfactants are evaluated .

  13. Freely dissolved concentrations of anionic surfactants in seawater solutions: optimization of the non-depletive solid-phase microextraction method and application to linear alkylbenzene sulfonates.

    NARCIS (Netherlands)

    Rico Rico, A.; Droge, S.T.J.; Widmer, D.; Hermens, J.L.M.

    2009-01-01

    A solid-phase microextraction method (SPME) has been optimized for the analysis of freely dissolved anionic surfactants, namely linear alkylbenzene sulfonates (LAS), in seawater. An effect of the thermal conditioning treatment on the polyacrylate fiber coating was demonstrated for both uptake kineti

  14. MICROBIAL SURFACTANTS. II. LIPOPEPTIDES

    Directory of Open Access Journals (Sweden)

    T. P. Pirog

    2014-04-01

    Full Text Available The classification and the chemical structure of the lipopeptides and their producers (bacteria of the genera Bacillus and Pseudomonas are given. The role of the lipopeptides in cells motility, biofilm formation, metal binding and xenobiotics degradation and their action on the cells of pro- and eukaryotes is summarized. The stages of the nonribosomal lipopeptides synthesis and the role of two-component (GacA/GacS, ComA/ComP and the quorum system regulation of this process are shown. The potential of lactic acid bacteria and marine microorganisms as alternative surfactants producers (glycolipids, lipopeptides, phospholipids and fatty acids, glycolipopeptides are discussed. Their productivity and advantages over traditional producers are given as well. The properties of surfactants synthesized by lactic acid bacteria (the reduction of the surface tension, the critical micelle concentration, the stability in a wide range of pH, the temperature, the biological activity are summarized. Surfactants of nonpathogenic probiotic bacteria could be used as effective antimicrobial agents and antiadhesive and marine producers which able to synthesize unique metabolites that are not produced by other microorganisms.

  15. Experimental and numerical results for CO2 concentration and temperature profiles in an occupied room

    Science.gov (United States)

    Cotel, Aline; Junghans, Lars; Wang, Xiaoxiang

    2014-11-01

    In recent years, a recognition of the scope of the negative environmental impact of existing buildings has spurred academic and industrial interest in transforming existing building design practices and disciplinary knowledge. For example, buildings alone consume 72% of the electricity produced annually in the United States; this share is expected to rise to 75% by 2025 (EPA, 2009). Significant reductions in overall building energy consumption can be achieved using green building methods such as natural ventilation. An office was instrumented on campus to acquire CO2 concentrations and temperature profiles at multiple locations while a single occupant was present. Using openFOAM, numerical calculations were performed to allow for comparisons of the CO2 concentration and temperature profiles for different ventilation strategies. Ultimately, these results will be the inputs into a real time feedback control system that can adjust actuators for indoor ventilation and utilize green design strategies. Funded by UM Office of Vice President for Research.

  16. Interaction of Fluorocarbon Containing Hydrophobically Modified Polyelectrolyte with Nonionic Surfactants

    Institute of Scientific and Technical Information of China (English)

    GUO,Jin-Feng(郭金峰); ZHUANG,Dong-Qing(庄东青); ZHOU,Hui(周晖); ZHANG,Yun-Xiang(章云祥)

    2002-01-01

    The interaction of fluorocarbon containing hydrophobically modified polyelectrolyte (FMPAANa) with two kinds of nonionic surfactants (hydrogenated and fluorinated) in a semidilute (0.5 wt% ) aqueous solution had been studied by rheological measurements. Association behavior was found in both systems. The hydrophobic interaction of FMPAANa with fluorinated surfactant (FC171) is much stronger than that with hydrogenated surfactant (NP7.5) at low surfactant concentrations. The interaction is strengthened by surfactants being added for the density of active junctions increased. Whereas distinct phenomena for FC171 and NP7. 5 start to be found as the surfactants added over their respective certain concentration. The interaction of polyelectrolyte with fluorinated surfactant increases dramatical ly while that with hydrogenated surfactant decreases.

  17. Simulations of H 2O 2 concentration profiles in the water surrounding spent nuclear fuel

    Science.gov (United States)

    Nielsen, Fredrik; Lundahl, Karin; Jonsson, Mats

    2008-01-01

    A simple mathematical model describing the hydrogen peroxide concentration profile in water surrounding a spent nuclear fuel pellet as a function of time has been developed. The water volume is divided into smaller elements, and the processes that affect hydrogen peroxide concentration are applied to each volume element. The model includes production of H 2O 2 from α-radiolysis, surface reaction between H 2O 2 and UO 2 and diffusion. Simulations show that the surface concentration of H 2O 2 increases fairly rapidly and approaches the steady-state concentration. The time to reach steady-state is sufficiently short to be neglected compared to the times of interest when simulating spent fuel dissolution under deep repository conditions. Consequently, the steady-state approach can be used to estimate the rate for radiation-induced spent nuclear fuel dissolution.

  18. Interactions of organic contaminants with mineral-adsorbed surfactants

    Science.gov (United States)

    Zhu, L.; Chen, B.; Tao, S.; Chiou, C.T.

    2003-01-01

    Sorption of organic contaminants (phenol, p-nitrophenol, and naphthalene) to natural solids (soils and bentonite) with and without myristylpyridinium bromide (MPB) cationic surfactant was studied to provide novel insight to interactions of contaminants with the mineral-adsorbed surfactant. Contaminant sorption coefficients with mineral-adsorbed surfactants, Kss, show a strong dependence on surfactant loading in the solid. At low surfactant levels, the Kss values increased with increasing sorbed surfactant mass, reached a maximum, and then decreased with increasing surfactant loading. The Kss values for contaminants were always higher than respective partition coefficients with surfactant micelles (Kmc) and natural organic matter (Koc). At examined MPB concentrations in water the three organic contaminants showed little solubility enhancement by MPB. At low sorbed-surfactant levels, the resulting mineral-adsorbed surfactant via the cation-exchange process appears to form a thin organic film, which effectively "adsorbs" the contaminants, resulting in very high Kss values. At high surfactant levels, the sorbed surfactant on minerals appears to form a bulklike medium that behaves essentially as a partition phase (rather than an adsorptive surface), with the resulting Kss being significantly decreased and less dependent on the MPB loading. The results provide a reference to the use of surfactants for remediation of contaminated soils/sediments or groundwater in engineered surfactant-enhanced washing.

  19. Exogenous Pulmonary Surfactant as a Vehicle for Antimicrobials: Assessment of Surfactant-Antibacterial Interactions In Vitro

    Directory of Open Access Journals (Sweden)

    Alexei Birkun

    2014-01-01

    Full Text Available Owing to its unique surface-active properties, an exogenous pulmonary surfactant may become a promising drug delivery agent, in particular, acting as a vehicle for antibiotics in topical treatment of pneumonia. The purpose of this study was to assess a mutual influence of natural surfactant preparation and three antibiotics (amikacin, cefepime, and colistimethate sodium in vitro and to identify appropriate combination(s for subsequent in vivo investigations of experimental surfactant/antibiotic mixtures. Influence of antibiotics on surface-active properties of exogenous surfactant was assessed using the modified Pattle method. Effects of exogenous surfactant on antibacterial activity of antimicrobials against Staphylococcus aureus, Klebsiella pneumoniae, and Pseudomonas aeruginosa were evaluated using conventional microbiologic procedures. Addition of amikacin or cefepime to surfactant had no significant influence on surface-active properties of the latter. Obvious reduction of surface-active properties was confirmed for surfactant/colistimethate composition. When suspended with antibiotics, surfactant either had no impact on their antimicrobial activity (amikacin or exerted mild to moderate influence (reduction of cefepime bactericidal activity and increase of colistimethate bacteriostatic activity against S. aureus and P. aeruginosa. Considering favorable compatibility profile, the surfactant/amikacin combination is advisable for subsequent investigation of joint surfactant/antibacterial therapy in animals with bacterial pneumonia.

  20. Indoor and outdoor measurements of vertical concentration profiles of airborne particulate matter.

    Science.gov (United States)

    Micallef, A; Deuchar, C N; Colls, J J

    1998-05-04

    Vertical concentration profiles of various particle size ranges of airborne particulate matter were measured from ground level up to 3 m, in outdoor and indoor environments. Indoor measurements were carried out in an electronics workshop, while two outdoor environments were chosen: a street canyon cutting across a town and an open field situated in a semi-rural environment. The novel measurement technique employed in this experimental work, which can also be used to determine vertical concentration gradients of pollutants other than airborne particles in different environments, is given particular attention. Analyses of the collected data for the environments considered are presented and some conclusions and plausible explanations of the profiles are discussed. The workshop and street canyon environments exhibited larger concentrations and vertical concentration gradients as compared to the sports field. This indicates that people breathing at different heights are subjected to different concentrations of airborne particulate matter, which has implications for sitting air pollution monitors intended for protection of public health and estimation of human exposure.

  1. A Review on Progress in QSPR Studies for Surfactants

    OpenAIRE

    Zhengwu Wang; Xiaoyi Zhang; Jiwei Hu

    2010-01-01

    This paper presents a review on recent progress in quantitative structure-property relationship (QSPR) studies of surfactants and applications of various molecular descriptors. QSPR studies on critical micelle concentration (cmc) and surface tension (γ) of surfactants are introduced. Studies on charge distribution in ionic surfactants by quantum chemical calculations and its effects on the structures and properties of the colloids of surfactants are also reviewed. The trends of QSPR studies o...

  2. Profile of Methane Concentrations in Soil and Atmosphere in Alpine Steppe Ecosystem on Tibetan Plateau

    Institute of Scientific and Technical Information of China (English)

    Pei Zhiyong; Ouyang Hua; Zhou Caiping; Xu Xingliang

    2009-01-01

    The methane concentration profile from -1.5m depth in soil to 32m height in air was measured in alpine steppe located in the permafrost area.Methane concentrations showed widely variations both in air and in soil during the study period.The mean concentrations in atmosphere were all higher than those in soil,and the highest methane concentration was found in air at the height of 16m with the lowest concentration occurring at the depth of 1.5m in soil.The variations of atmospheric methane concentrations did not show any clear pattern both temporally and spatially,although they exhibited a more steady-stable state than those in soil.During the seasonal variations,the methane concentrations at different depths in soil were significantly correlated (R2>0.6) with each other comparing to the weak correlations (R2<0.2) between the atmospheric concentrations at different heights.Mean methane concentrations in soil significantly decreased with depth.This was the compositive influence of the decreasing production rates and the increasing methane oxidation rates,which was caused by the descent soil moisture with depth.Although the methane concentrations at all depths varied widely during the growing season,they showed very distinct temporal variations in the non-growing season.It was indicated from the literatures that methane oxidation rates were positively correlated with soil temperature.The higher methane concentrations in soil during the winter were determined by the lower methane oxidation rates with decreasing soil temperatures,whereas methane production rates had no reaction to the lower temperature.Relations between methane contribution and other environmental factors were not discussed in this paper for lacking of data,which impulse us to carry out further and more detailed studies in this unique area.

  3. Radial metal concentration profiles in trees growing on highly contaminated soils.

    Science.gov (United States)

    Superville, Pierre-Jean; de Winter, Niels; Phung, Anh Tuan; Proix, Nicolas; Baeyens, Willy; Gao, Yue

    2017-04-01

    The soil around Metaleurop, a big smelter, is heavily contaminated by Zn, Pb, Cd and Cu. In order to compare the impact of different soil amendments on the metal availability to trees, the polluted soil section was divided in a reference parcel and two others with either sulfo-calcic or silico-aluminous ash amendments. Five different tree species were planted on the parcels and the uptake of heavy metals in these trees was studied. Total and labile metal fractions were assessed in each of the 3 parcels. The mobility and assimilation of the metals was highest in the non-amended, reference soil parcel which had the lowest pH, organic matter and carbonate content. In all soils, pH decreased while organic matter content and mobility of the metals increased over time. Highest bulk concentrations of trace metals were found in white willow trees (Salix alba L.). Laser ablation-ICPMS was used to study changes in metal accumulation over a period of 10 years after planting the trees. The radial metal profiles in the trunk core samples varied between elements and tree species, however, in all willow trees the radial Cd and Zn profiles were significantly correlated. Radial pollutant concentration patterns are discussed in terms of seasonal effects, health status, tree species and metal mobility in the soil. For Cd and Zn, the profiles were influenced by their mobility in the soils. In general, periodical patterns were observed for Pb. Cu concentration profiles were decreasing over time, with the strongest decrease in the initial growth period.

  4. Tunable, antibacterial activity of silicone polyether surfactants.

    Science.gov (United States)

    Khan, Madiha F; Zepeda-Velazquez, Laura; Brook, Michael A

    2015-08-01

    Silicone surfactants are used in a variety of applications, however, limited data is available on the relationship between surfactant structure and biological activity. A series of seven nonionic, silicone polyether surfactants with known structures was tested for in vitro antibacterial activity against Escherichia coli BL21. The compounds varied in their hydrophobic head, comprised of branched silicone structures with 3-10 siloxane linkages and, in two cases, phenyl substitution, and hydrophilic tail of 8-44 poly(ethylene glycol) units. The surfactants were tested at three concentrations: below, at, and above their Critical Micelle Concentrations (CMC) against 5 concentrations of E. coli BL21 in a three-step assay comprised of a 14-24h turbidometric screen, a live-dead stain and viable colony counts. The bacterial concentration had little effect on antibacterial activity. For most of the surfactants, antibacterial activity was higher at concentrations above the CMC. Surfactants with smaller silicone head groups had as much as 4 times the bioactivity of surfactants with larger groups, with the smallest hydrophobe exhibiting potency equivalent to sodium dodecyl sulfate (SDS). Smaller PEG chains were similarly associated with higher potency. These data link lower micelle stability and enhanced permeability of smaller silicone head groups to antibacterial activity. The results demonstrate that simple manipulation of nonionic silicone polyether structure leads to significant changes in antibacterial activity.

  5. Thermodynamic Study of the Ion-Pair Complexation Equilibria of Dye and Surfactant by Spectral Titration and Chemometric Analysis

    Directory of Open Access Journals (Sweden)

    Hakimeh Abbasi Awal

    2017-12-01

    Full Text Available Surfactant-dye interactions are very important in chemical and dyeing processes. The dyes interact strongly with surfactant and show new spectrophotometric properties, so the UV-vis absorption spectrophotometric method has been used to study this process and extract some thermodynamic parameters. In this work, the association equilibrium between ionic dyes and ionic surfactant were studied by analyzing spectrophotometric data using chemometric methods. Methyl orange and crystal violet were selected as a model of cationic and anionic dyes respectively. Also sodium dodecyl sulphate and cetyltrimethylammonium bromide were selected as anionic and cationic surfactant, respectively. Hard model methods such as target transform fitting (TTF classical multi-wavelength fitting and soft model method such as multivariate curve resolution (MCR were used to analyze data that were recorded as a function of surfactant concentration in premicellar and postmicellar regions. Hard model methods were used to resolve data using ion-pair model in premicellar region in order to extract the concentration and spectral profiles of individual components and also related thermodynamic parameters. The equilibrium constants and other thermodynamic parameters of interaction of dyes with surfactants were determined by studying the dependence of their absorption spectra on the temperature in the range 293–308 K at concentrations of 5 × 10−6 M and 8 × 10−6 M for dye crystal violet and methyl orange, respectively. In postmicellar region, the MCR-ALS method was applied for resolving data and getting the spectra and concentration profiles in complex mixtures of dyes and surfactants.

  6. AMS method for depth profiling of trace elements concentration in materials – Construction and applications

    Energy Technology Data Exchange (ETDEWEB)

    Stan-Sion, C.; Enachescu, M.

    2015-10-15

    The need to investigate the behavior of solid state materials on the impact/retention/repulsion/contamination/impregnation with special trace elements or radioactive elements has driven us to develop a modified Accelerator Mass Spectrometry (AMS) analyzing method that is able to perform the measurement of the concentration depth profile of an element in a host material. This upgraded method that we call AMS-depth profiling method (AMS-DP) measures continuously the concentration of a trace element in a given sample material as a function of the depth from the surface (e.g., tritium in carbon, deuterium in tungsten, etc.). However, in order to perform depth profiling, common AMS facilities have to undergo several changes: a new replaceable sample target-holder has to be constructed to accept small plates of solid material as samples; their position has to be adjusted in the focus point of the sputter beam; crater rim effects of the produced hole in the sample have to be avoided or removed from the registered events in the detector; suitable reference samples have to be prepared and used for calibration. All procedures are presented in the paper together with several applications.

  7. AMS method for depth profiling of trace elements concentration in materials - Construction and applications

    Science.gov (United States)

    Stan-Sion, C.; Enachescu, M.

    2015-10-01

    The need to investigate the behavior of solid state materials on the impact/retention/repulsion/contamination/impregnation with special trace elements or radioactive elements has driven us to develop a modified Accelerator Mass Spectrometry (AMS) analyzing method that is able to perform the measurement of the concentration depth profile of an element in a host material. This upgraded method that we call AMS-depth profiling method (AMS-DP) measures continuously the concentration of a trace element in a given sample material as a function of the depth from the surface (e.g., tritium in carbon, deuterium in tungsten, etc.). However, in order to perform depth profiling, common AMS facilities have to undergo several changes: a new replaceable sample target-holder has to be constructed to accept small plates of solid material as samples; their position has to be adjusted in the focus point of the sputter beam; crater rim effects of the produced hole in the sample have to be avoided or removed from the registered events in the detector; suitable reference samples have to be prepared and used for calibration. All procedures are presented in the paper together with several applications.

  8. Concentration profiles of metals in breast milk, drinking water, and soil: relationship between matrices.

    Science.gov (United States)

    Cardoso, Osmar O; Julião, Fabiana C; Alves, Renato I S; Baena, Antonio R; Díez, Isabel G; Suzuki, Meire N; Celere, Beatriz S; Nadal, Martí; Domingo, José L; Segura-Muñoz, Susana I

    2014-07-01

    The concentrations of Cd, Cr, Cu, Hg, Mn, Ni, Pb, Sn, and Zn were determined in breast milk of women living in Conceição das Alagoas, Minas Gerais, Brazil. The potential relationships between metal levels in samples of breast milk, drinking water, and soils collected in the study area were also established. Metal levels in breast milk, except Cr, were lower in comparison to WHO reference concentrations. Zinc was the predominant element in breast milk and drinking water samples, with a median level of 46.2 and 82.2 μg · L(-1), respectively. Soils presented a different pattern of metal concentrations with respect to those found in breast milk and drinking water, Chromium showed the highest median levels (148 mg · kg(-1)), while a certain predominance of Zn and Cu was also observed (47.0 and 43.0 mg · kg(-1), respectively). Similar profiles were observed when comparing metal concentrations in drinking water and breast milk (chi-square χ(2) = 14.36; p < 0.05). In contrast, breast milk-soil and drinking water-soil metal concentration profiles showed significant differences (χ(2) = 635.05 and χ(2) = 721.78, respectively; p < 0.05). These results indicate that drinking water is an important exposure pathway for metals to newborns through breast milk. Further studies should be aimed at assessing the body burdens of metals in that population and at evaluating the potential relationships in the concentrations in biological and environmental matrices as well as at estimating the contribution of dietary intake of metals. In addition, the presence of other chemical pollutants in breast milk should be also studied in order to assess the combined newborn exposure to other contaminants.

  9. Modeling of Carbon Concentration Profile Development During Both Atmosphere and Low Pressure Carburizing Processes

    Science.gov (United States)

    Wei, Y.; Zhang, L.; Sisson, R. D.

    2013-07-01

    Heat treaters need an effective simulation tool to predict the carburization performance of a variety of steels. The tool is needed to not only predict the carbon profile but also optimize the process in terms of the cycle time and the total cost. CarbToolhas been developed to meet these needs for gas and vacuum carburization. In this article, CarbToolpredictions were compared with industrial experimental results for three types of steels (AISI 8620, 5120, and 4320), heat treated by both gas and vacuum carburizing processes. Based on the agreement of model predictions and experimental results, it is found that CarbToolcould be used to predict the carbon concentration profile for a variety of alloys in both gas and vacuum carburizing processes.

  10. Diffusion-controlled spherulite growth in obsidian inferred from H2O concentration profiles

    Energy Technology Data Exchange (ETDEWEB)

    Watkins, Jim; Watkins, Jim; Manga, Michael; Huber, Christian; Martin, Michael C.

    2007-11-02

    Spherulites are spherical clusters of radiating crystals that occur naturally in rhyolitic obsidian. The growth of spherulites requires diffusion and uptake of crystal forming components from the host rhyolite melt or glass, and rejection of non-crystal forming components from the crystallizing region. Water concentration profiles measured by synchrotron-source Fourier transform spectroscopy reveal that water is expelled into the surrounding matrix during spherulite growth, and that it diffuses outward ahead of the advancing crystalline front. We compare these profiles to models of water diffusion in rhyolite to estimate timescales for spherulite growth. Using a diffusion-controlled growth law, we find that spherulites can grow on the order of days to months at temperatures above the glass transition. The diffusion-controlled growth law also accounts for spherulite size distribution, spherulite growth below the glass transition, and why spherulitic glasses are not completely devitrified.

  11. Effect of Dietary Inulin Source on Piglet Performance, Immunoglobulin Concentration, and Plasma Lipid Profile

    Directory of Open Access Journals (Sweden)

    Grela Eugeniusz R.

    2014-10-01

    Full Text Available The aim of the study was to evaluate the effect of an inulin source (aqueous or aqueous-alcoholic extract, dried chicory root, or dried Jerusalem artichoke tubers on piglet performance, plasma lipid profile, and immunoglobulin concentration. The study was conducted on 534 piglets (44 litters allocated to five nutritional groups: group I (control - fed basal diet, groups II and III receiving basal diet supplemented with 2% of inulin (aqueous and aqueous-alcoholic extract respectively, and groups IV and V -4% additive of dried artichoke or dried chicory respectively. During the trial, piglets’ body weight, feed intake, diarrhoea incidence, and mortality were controlled. Blood samples were collected twice from six animals of each group. In blood plasma, indices of lipid profile and concentrations of IgA, IgG and IgM were measured. The addition of inulin, regardless of its form (extracts or dried plants, significantly improved the rearing indices. In piglets of groups III, IV and V a significant improvement of daily weight gains and feed efficiency was noted. Inulin showed hypolipidemic activity (lowered total cholesterol level and stimulated piglet immune system manifested by elevated IgA and IgG concentrations. Irrespective of the inulin source, a lower mortality rate resulting from the improvement of animal health was noted in all experimental groups.

  12. EXPERIMENTAL CHARACTERIZATION OF FLUOROCARBON-MODIFIED POLYACRYLAMIDE/SURFACTANT AQUEOUS SOLUTIONS

    Institute of Scientific and Technical Information of China (English)

    Huai-tian Bu; Zhen-zhong Yang; Yun-xiang Zhang

    2003-01-01

    The interaction between surfactants and fluorocarbon-modified polyacrylamide (FC-PAM) in aqueous solutions was evaluated by theological means and fluorescence spectroscopy and was found to be strong regardless of the surfactant's nature. Two representative surfactants, anionic sodium dodecyl sulfate (SDS) and nonionic Triton X-100, were used. The origin of the interaction and its dependence on the surfactant concentration were discussed.

  13. Thermally cleavable surfactants

    Science.gov (United States)

    McElhanon, James R.; Simmons, Blake A.; Zifer, Thomas; Jamison, Gregory M.; Loy, Douglas A.; Rahimian, Kamyar; Long, Timothy M.; Wheeler, David R.; Staiger, Chad L.

    2006-04-04

    Two new surfactant molecules are reported which contain thermally labile Diels-Alder adducts connecting the polar and non-polar sections of each molecule. The two surfactants possess identical non-polar dodecyl tail segments but exhibit different polar headgroups. The surfactants become soluble in water when anionic salts are formed through the deprotonation of the surfactant headgroups by the addition of potassium hydroxide. When either surfactant is exposed to temperature above about 60.degree. C., the retro Diels-Alder reaction occurs, yielding hydrophilic and hydrophobic fragments and the aqueous solutions of the surfactants subsequently exhibit loss of all surface-active behavior.

  14. Thermally cleavable surfactants

    Energy Technology Data Exchange (ETDEWEB)

    McElhanon, James R. (Manteca, CA); Simmons, Blake A. (San Francisco, CA); Zifer, Thomas (Manteca, CA); Jamison, Gregory M. (Albuquerque, NM); Loy, Douglas A. (Albuquerque, NM); Rahimian, Kamyar (Albuquerque, NM); Long, Timothy M. (Urbana, IL); Wheeler, David R. (Albuquerque, NM); Staiger, Chad L. (Albuquerque, NM)

    2009-09-29

    Two new surfactant molecules are reported which contain thermally labile Diels-Alder adducts connecting the polar and non-polar sections of each molecule. The two surfactants possess identical non-polar dodecyl tail segments but exhibit different polar headgroups. The surfactants become soluble in water when anionic salts are formed through the deprotonation of the surfactant headgroups by the addition of potassium hydroxide. When either surfactant is exposed to temperature above about 60.degree. C., the retro Diels-Alder reaction occurs, yielding hydrophilic and hydrophobic fragments or the aqueous solutions of the surfactants subsequently exhibit loss of all surface-active behavior.

  15. Thermally cleavable surfactants

    Energy Technology Data Exchange (ETDEWEB)

    McElhanon, James R. (Manteca, CA); Simmons, Blake A. (San Francisco, CA); Zifer, Thomas (Manteca, CA); Jamison, Gregory M. (Albuquerque, NM); Loy, Douglas A. (Albuquerque, NM); Rahimian, Kamyar (Albuquerque, NM); Long, Timothy M. (Urbana, IL); Wheeler, David R. (Albuquerque, NM); Staiger, Chad L. (Albuquerque, NM)

    2009-11-24

    Two new surfactant molecules are reported which contain thermally labile Diels-Alder adducts connecting the polar and non-polar sections of each molecule. The two surfactants possess identical non-polar dodecyl tail segments but exhibit different polar headgroups. The surfactants become soluble in water when anionic salts are formed through the deprotonation of the surfactant headgroups by the addition of potassium hydroxide. When either surfactant is exposed to temperature above about 60.degree. C., the retro Diels-Alder reaction occurs, yielding hydrophilic and hydrophobic fragments or the aqueous solutions of the surfactants subsequently exhibit loss of all surface-active behavior.

  16. Hemolysis by surfactants--A review.

    Science.gov (United States)

    Manaargadoo-Catin, Magalie; Ali-Cherif, Anaïs; Pougnas, Jean-Luc; Perrin, Catherine

    2016-02-01

    An overview of the use of surfactants for erythrocyte lysis and their cell membrane action mechanisms is given. Erythrocyte membrane characteristics and its association with the cell cytoskeleton are presented in order to complete understanding of the erythrocyte membrane distortion. Cell homeostasis disturbances caused by surfactants might induce changes starting from shape modification to cell lysis. Two main mechanisms are hypothesized in literature which are osmotic lysis and lysis by solubilization even if the boundary between them is not clearly defined. Another specific mechanism based on the formation of membrane pores is suggested in the particular case of saponins. The lytic potency of a surfactant is related to its affinity for the membrane and the modification of the lipid membrane curvature. This is to be related to the surfactant shape defined by its hydrophobic and hydrophilic moieties but also by experimental conditions. As a consequence, prediction of the hemolytic potency of a given surfactant is challenging. Several studies are focused on the relation between surfactant erythrolytic potency and their physico-chemical parameters such as the critical micellar concentration (CMC), the hydrophile-lipophile balance (HLB), the surfactant membrane/water partition coefficient (K) or the packing parameter (P). The CMC is one of the most important factors considered even if a lytic activity cut-off effect points out that the only consideration of CMC not enough predictive. The relation K.CMC must be considered in addition to the CMC to predict the surfactant lytic capacity within the same family of non ionic surfactant. Those surfactant structure/lytic activity studies demonstrate the requirement to take into account a combination of physico-chemical parameters to understand and foresee surfactant lytic potency.

  17. Changes in mineral concentrations and phosphorus profile during dry-grind processing of corn into ethanol.

    Science.gov (United States)

    Liu, KeShun; Han, Jianchun

    2011-02-01

    For determining variation in mineral composition and phosphorus (P) profile among streams of dry-grind ethanol production, samples of ground corn, intermediate streams, and distillers dried grains with solubles (DDGS) were obtained from three commercial plants. Most attributes (dry matter concentrations) increased significantly from corn to cooked slurry but fermentation caused most significant increase in all attributes. During centrifugation, more minerals went into thin stillage than wet grains, making minerals most concentrated in the former. Mineral increase in DDGS over corn was about 3 fold, except for Na, S, Ca, and Fe. The first three had much higher fold of increase, presumably due to exogenous addition. During fermentation, phytate P and inorganic P had 2.54 and 10.37 fold of increase over corn, respectively, while relative to total P, % phytate P decreased and % inorganic P increased significantly. These observations suggest that phytate underwent some degradation, presumably due to activity of yeast phytase.

  18. Circulating Irisin Concentrations Are Associated with a Favourable Lipid Profile in the General Population.

    Science.gov (United States)

    Oelmann, Simon; Nauck, Matthias; Völzke, Henry; Bahls, Martin; Friedrich, Nele

    2016-01-01

    Irisin is a myokine, which is mainly inversely associated with the risk for non-communicable diseases. Irisin improves cellular energy metabolism by uncoupling the mitochondrial respiratory chain resulting in increased energy expenditure using lipids. To date potential associations between irisin concentration and lipid profile are poorly understood. Therefore, this investigation aimed to evaluate potential associations between irisin and lipid levels in the general population. Data of 430 men and 537 women from the population-based Study of Health in Pomerania (SHIP-TREND) with available irisin and lipid concentrations were used. Analyses of variance, linear and logistic regression models adjusted for age, HBA1c, waist circumference, physical activity, smoking, alcohol consumption, systolic blood pressure, ALAT were calculated. We detected significantly inverse associations between irisin and circulating levels of total [beta coefficient 0.21 (standard error 0.08), p = 0.01], low-density cholesterol [-0.16 (0.07), p = 0.03] and triglycerides [-0.17 (0.08), p = 0.02] for men. Females without lipid lowering medication had an inverse association between irisin and total cholesterol [-0.12 (0.06), p = 0.05]. Further, male subjects with irisin concentrations in the third tertile had an increased odds for elevated low-density cholesterol [odds ratio 1.96 (95% confidence interval 1.07-3.48), p = 0.03) and triglyceride [1.95 (1.09-3.47), p = 0.02] levels, even after exclusion of subjects with lipid lowering medication. In addition, our data revealed an annual rhythm of serum irisin levels with peak levels arise in winter and summer months. This is the first investigation to report a significant association between circulating irisin and a favourable lipid profile in the general population. This may infer that higher irisin concentrations are associated with a reduced risk for non-communicable diseases.

  19. Circulating Irisin Concentrations Are Associated with a Favourable Lipid Profile in the General Population.

    Directory of Open Access Journals (Sweden)

    Simon Oelmann

    Full Text Available Irisin is a myokine, which is mainly inversely associated with the risk for non-communicable diseases. Irisin improves cellular energy metabolism by uncoupling the mitochondrial respiratory chain resulting in increased energy expenditure using lipids. To date potential associations between irisin concentration and lipid profile are poorly understood. Therefore, this investigation aimed to evaluate potential associations between irisin and lipid levels in the general population.Data of 430 men and 537 women from the population-based Study of Health in Pomerania (SHIP-TREND with available irisin and lipid concentrations were used. Analyses of variance, linear and logistic regression models adjusted for age, HBA1c, waist circumference, physical activity, smoking, alcohol consumption, systolic blood pressure, ALAT were calculated.We detected significantly inverse associations between irisin and circulating levels of total [beta coefficient 0.21 (standard error 0.08, p = 0.01], low-density cholesterol [-0.16 (0.07, p = 0.03] and triglycerides [-0.17 (0.08, p = 0.02] for men. Females without lipid lowering medication had an inverse association between irisin and total cholesterol [-0.12 (0.06, p = 0.05]. Further, male subjects with irisin concentrations in the third tertile had an increased odds for elevated low-density cholesterol [odds ratio 1.96 (95% confidence interval 1.07-3.48, p = 0.03 and triglyceride [1.95 (1.09-3.47, p = 0.02] levels, even after exclusion of subjects with lipid lowering medication. In addition, our data revealed an annual rhythm of serum irisin levels with peak levels arise in winter and summer months.This is the first investigation to report a significant association between circulating irisin and a favourable lipid profile in the general population. This may infer that higher irisin concentrations are associated with a reduced risk for non-communicable diseases.

  20. Profiles of Trace Gas Concentrations in Undisturbed Forest in the Brazilian Amazon

    Science.gov (United States)

    Carmo, J.; Crill, P.; Dias, J.; Camargo, P.; Keller, M.

    2004-12-01

    Globally, upland tropical forests are the largest natural source of nitrous oxide (N2O). Soils of upland tropical forests generally consume methane (CH4) although this process has only a minor effect on the atmospheric CH4 budget. In this study, we investigate the concentrations of N2O, CH4, and carbon dioxide (CO2) measured in profiles on towers in undisturbed forest at three Amazon forest sites located in the municipalities of Manaus, Amazonas, Melgaço, Para (Caxiuana), and Sinop, Mato Grosso. We measured gas concentration profiles at six heights above the ground on during both wet and dry seasons in 2003 and 2004. Nylon tubes (0.95 cm OD) were installed on towers used for meteorological and flux measurements in LBA. Gas samples were drawn through teflon filters (1μ m pore size) to a manifold and directed either to an infra-red gas analyzer (LiCor IRGA Model 6262), to sampling canisters, or to exhaust. During sampling periods, we maintained a continuous flow of at least 1 L min-1 through all sampling tubes. CO2 concentration data from the IRGA were recorded continuously using a Datastick analog to digital converter and a palm top computer. We removed air samples in electro-polished stainless steel canisters for off-site analysis of N2O and CH4 by ECD and FID gas chromatography respectively. Sampling times were selected based upon real-time measurements of CO2 concentration. Relatively stable meteorological conditions at night led to consistent increases in CO2 concentrations. At times we also observed increases in the concentrations of CH4 and N2O concentrations correlated with increasing CO2. The source of the increasing CO2 is most likely respiration by soil and above-ground organisms. Correlated increases in CH4 and N2O concentrations also likely result from biological activity in the soil and the canopy layer of the studied forests. Concentrations of these gases increase at night because the rate of gas emission in the canopy layer exceeds the rates of

  1. A disjoining pressure model with effect of surfactant concentration in spreading of liquid drops%液滴铺展过程中受活性剂浓度影响的分离压模型研究

    Institute of Scientific and Technical Information of China (English)

    王松岭; 李春曦; 叶学民

    2011-01-01

    结合已有的实验结果,通过考虑活性剂特性和浓度对分子间引力和斥力的不同影响,建立了通用的分离压理论模型,并给出了自由能密度表达式.所建模型包含了活性剂浓度Γ、毛细力数C、指数(m,n),以及预置液膜厚度h∞等因素的影响,进一步完善了分离压模型的理论研究.%Combining with published experimental results, a general disjoining pressure model is established based on considering the different influence of surfactant concentration on intermolecular repulsive and attractive forces, and the expression of the free energy density is formulated in present paper. The present model includes the effects of surfactant concentration г, capillary number C, exponents index ( m, n) and prewetted film thickness h∞, and provides an improved theoretical model for exploring the disjoining pressure.

  2. Graded Carrier Concentration Absorber Profile for High Efficiency CIGS Solar Cells

    Directory of Open Access Journals (Sweden)

    Antonino Parisi

    2015-01-01

    Full Text Available We demonstrate an innovative CIGS-based solar cells model with a graded doping concentration absorber profile, capable of achieving high efficiency values. In detail, we start with an in-depth discussion concerning the parametrical study of conventional CIGS solar cells structures. We have used the wxAMPS software in order to numerically simulate cell electrical behaviour. By means of simulations, we have studied the variation of relevant physical and chemical parameters—characteristic of such devices—with changing energy gap and doping density of the absorber layer. Our results show that, in uniform CIGS cell, the efficiency, the open circuit voltage, and short circuit current heavily depend on CIGS band gap. Our numerical analysis highlights that the band gap value of 1.40 eV is optimal, but both the presence of Molybdenum back contact and the high carrier recombination near the junction noticeably reduce the crucial electrical parameters. For the above-mentioned reasons, we have demonstrated that the efficiency obtained by conventional CIGS cells is lower if compared to the values reached by our proposed graded carrier concentration profile structures (up to 21%.

  3. Meat lipid profile of steers finished in pearl millet pasture with different rates of concentrate

    Directory of Open Access Journals (Sweden)

    Luis Fernando Glasenapp de Menezes

    2013-05-01

    Full Text Available The objective of this work was to evaluate the meat lipid profile from Devon beef steers finished in pearl millet (Pennisetum americanum pasture and fed at different rates of concentrate supplementary diet. Twelve steers weighing 270 kg, at 12‑month‑average initial age, were randomly distributed into three treatments: pearl millet pasture; and pearl millet pasture plus a concentrate equivalent at 0.5 or 1.0% of body weight, with two replicates. Total contents of saturated and unsaturated fatty acids, the polyunsaturated:saturated ratio and other relevant fatty acids as the vaccenic acid, conjugated linoleic acid, omega‑3, and omega‑6 were not affected by the consumption of a concentrate supplement at 0.5 or 1.0% live weight. However, the 0.5% supplementation level reduced the concentration of dihomo‑γ‑linolenic fatty acid (C20: 3 n‑6, while the 1.0% supplementation level elevated the content of docosahexaenoic (DHA (C22: 6 n‑3 fatty acid, and the omega‑6:omega‑3 ratio in meat. Consumption of up to 1.0% energy supplementation increases the omega‑6:omega‑3 ratio in meat from Devon steers grazing on pearl millet pasture.

  4. What's normal? Oligosaccharide concentrations and profiles in milk produced by healthy women vary geographically.

    Science.gov (United States)

    McGuire, Michelle K; Meehan, Courtney L; McGuire, Mark A; Williams, Janet E; Foster, James; Sellen, Daniel W; Kamau-Mbuthia, Elizabeth W; Kamundia, Egidioh W; Mbugua, Samwel; Moore, Sophie E; Prentice, Andrew M; Kvist, Linda J; Otoo, Gloria E; Brooker, Sarah L; Price, William J; Shafii, Bahman; Placek, Caitlyn; Lackey, Kimberly A; Robertson, Bianca; Manzano, Susana; Ruíz, Lorena; Rodríguez, Juan M; Pareja, Rossina G; Bode, Lars

    2017-03-29

    Background: Human milk is a complex fluid comprised of myriad substances, with one of the most abundant substances being a group of complex carbohydrates referred to as human milk oligosaccharides (HMOs). There has been some evidence that HMO profiles differ in populations, but few studies have rigorously explored this variability.Objectives: We tested the hypothesis that HMO profiles differ in diverse populations of healthy women. Next, we examined relations between HMO and maternal anthropometric and reproductive indexes and indirectly examined whether differences were likely related to genetic or environmental variations.Design: In this cross-sectional, observational study, milk was collected from a total of 410 healthy, breastfeeding women in 11 international cohorts and analyzed for HMOs by using high-performance liquid chromatography.Results: There was an effect of the cohort (P 4 times higher in milk collected in Sweden than in milk collected in rural Gambia (mean ± SEM: 473 ± 55 compared with 103 ± 16 nmol/mL, respectively; P < 0.05), and disialyllacto-N-tetraose (DSLNT) concentrations ranged from 216 ± 14 nmol/mL (in Sweden) to 870 ± 68 nmol/mL (in rural Gambia) (P < 0.05). Maternal age, time postpartum, weight, and body mass index were all correlated with several HMOs, and multiple differences in HMOs [e.g., lacto-N-neotetrose and DSLNT] were shown between ethnically similar (and likely genetically similar) populations who were living in different locations, which suggests that the environment may play a role in regulating the synthesis of HMOs.Conclusions: The results of this study support our hypothesis that normal HMO concentrations and profiles vary geographically, even in healthy women. Targeted genomic analyses are required to determine whether these differences are due at least in part to genetic variation. A careful examination of sociocultural, behavioral, and environmental factors is needed to determine their roles in this regard. This

  5. Aggregation of sulfosuccinate surfactants in water

    Energy Technology Data Exchange (ETDEWEB)

    Magid, L.J.; Daus, K.A.; Butler, P.D.; Quincy, R.B.

    1983-12-22

    The aggregation of sodium di-n-alkyl sulfosuccinates in water (H/sub 2/O and D/sub 2/O at 45/sup 0/C) has been investigated. A self-consistent picture of the dependence of sodium ion binding on surfactant concentration is obtained from emf measurements, conductimetry, and small-angle neutron scattering (SANS) measurements. The concentration dependence of the micellar agregation number for the sulfosuccinates and related double-tailed surfactants depends markedly on surfactant solubility. A sphere-to-disk transition in micellar shape, which might have been expected as a precursor to formation of a lamellar mesophase, was not observed as the surfactant concentration was increased. 8 figures, 2 tables.

  6. Effect of surfactant concentration and interfacial slip on the flow past a viscous drop at low surface P\\'eclet number

    CERN Document Server

    Sekhar, G P Raja; Rohde, Christian

    2016-01-01

    The motion of a viscous drop is investigated when the interface is fully covered with a stagnant layer of surfactant in an arbitrary unsteady Stokes flow for the low surface P\\'eclet number limit. The effect of the interfacial slip coefficient on the behavior of the flow field is also considered. The hydrodynamic problem is solved by the solenoidal decomposition method and the drag force is computed in terms of Faxen's laws using a perturbation ansatz in powers of the surface P\\'eclet number. The analytical expressions for the migration velocity of the drop are also obtained in powers of the surface P\\'eclet number. Further instances corresponding to a given ambient flow as uniform flow, Couette flow, Poiseuille flow are analyzed. Moreover, it is observed that, a surfactant-induced cross-stream migration of the drop occur towards the centre-line in both Couette flow and Poiseuille flow cases. The variation of the drag force and migration velocity is computed for different parameters such as P\\'eclet number, M...

  7. Numerical Investigation of Thin Film Spreading Driven by Surfactant Using Upwind Schemes

    Directory of Open Access Journals (Sweden)

    E. Momoniat

    2013-01-01

    Full Text Available Numerical solutions of a coupled system of nonlinear partial differential equations modelling the effects of surfactant on the spreading of a thin film on a horizontal substrate are investigated. A CFL condition is obtained from a von Neumann stability analysis of a linearised system of equations. Numerical solutions obtained from a Roe upwind scheme with a third-order TVD Runge-Kutta approximation to the time derivative are compared to solutions obtained with a Roe-Sweby scheme coupled to a minmod limiter and a TVD approximation to the time derivative. Results from both of these schemes are compared to a Roe upwind scheme and a BDF approximation to the time derivative. In all three cases high-order approximations to the spatial derivatives are employed on the interior points of the spatial domain. The Roe-BDF scheme is shown to be an efficient numerical scheme for capturing sharp changes in gradient in the free surface profile and surfactant concentration. Numerical simulations of an initial exponential free surface profile coupled with initial surfactant concentrations for both exogenous and endogenous surfactants are considered.

  8. Structural study of surfactant-dependent interaction with protein

    Energy Technology Data Exchange (ETDEWEB)

    Mehan, Sumit; Aswal, Vinod K., E-mail: vkaswal@barc.gov.in [Solid State Physics Division, Bhabha Atomic Research Centre, Mumbai 400 085 (India); Kohlbrecher, Joachim [Laboratory for Neutron Scattering, Paul Scherrer Institut, CH-5232 PSI Villigen (Switzerland)

    2015-06-24

    Small-angle neutron scattering (SANS) has been used to study the complex structure of anionic BSA protein with three different (cationic DTAB, anionic SDS and non-ionic C12E10) surfactants. These systems form very different surfactant-dependent complexes. We show that the structure of protein-surfactant complex is initiated by the site-specific electrostatic interaction between the components, followed by the hydrophobic interaction at high surfactant concentrations. It is also found that hydrophobic interaction is preferred over the electrostatic interaction in deciding the resultant structure of protein-surfactant complexes.

  9. Dimeric Surfactants: Promising Ingredients of Cosmetics and Toiletries

    Directory of Open Access Journals (Sweden)

    Naveen Kumar

    2013-11-01

    Full Text Available Surfactants are an essential ingredient for cosmetic, toiletries and personal care products for enhancing their performance. Dimeric surfactants demonstrate superiority compared to conventional surfactants in all areas of application. Dimeric surfactants are extremely promising for utilization in various cosmetic formulations viz. shampoo, lotions, creams, conditioners etc. These surfactants possess extremely unique surface properties viz. lower surface tension, unique micellization, low critical micelle concentration (CMC and antimicrobial activity, higher solubilization etc. Dimerics enhance the performances of cosmetics in an extraordinary manner and provide eco-friendly preparations for human epidermis.

  10. [Measurements of CO2 Concentration Profile in Troposphere Based on Balloon-Borne TDLAS System].

    Science.gov (United States)

    Yao, Lu; Liu, Wen-qing; Liu, Jian-guo; Kan, Rui-feng; Xu, Zhen-yu; Ruan, Jun; Yuan, Song

    2015-10-01

    The main source and sink of CO2 in the atmosphere are concentrated in the troposphere. It is of great significance to the study of CO2 flux and global climate change to obtain the accurate tropospheric CO2 concentration profile. For the characteristics of high resolution, high sensitivity and fast response of tunable diode laser absorption spectroscopy (TDLAS), a compact balloon-borne system based on direct absorption was developed to detect the CO2 concentration profiles by use of the 2 004. 02 nm, R(16), v1+v3 line without the interfere of H2O absorption and the CO2 density of the number of molecules below 10 km in the troposphere was obtained. Due to the balloon-borne environment, a compact design of one single board integrated with laser driver, signal conditioning, spectra acquiring and concentration retrieving was developed. Limited by the working capability and hardware resources of embedded micro-processor, the spectra processing algorithm was optimized to reduce the time-cost. Compared with the traditional TDLAS sensors with WMS technique, this system was designed based on the direct absorption technique by means of an open-path Herriott cell with 20 m optical-path, which avoided the process of standardization and enhanced the environmental adaptation. The universal design of hardware and software platform achieved diverse gas measuring by changing the laser and adjusting some key parameters in algorithm. The concept of compact design helped to reduce the system's power and volume and balanced the response speed and measure precision. The power consumes below 1.5 W in room temperature and the volume of the single board is 120 mm x 100 mm x 25 mm, and the measurement accuracy is ± 0.6 x 10(-6) at 1.5 s response time. It has been proved that the system can realize high precision detection of CO2 profile at 15 m vertical resolution in troposphere and TDLAS is an available method for balloon-borne detection.

  11. Rheological properties of ovalbumin hydrogels as affected by surfactants addition.

    Science.gov (United States)

    Hassan, Natalia; Messina, Paula V; Dodero, Veronica I; Ruso, Juan M

    2011-04-01

    The gel properties of ovalbumin mixtures with three different surfactants (sodium perfluorooctanoate, sodium octanoate and sodium dodecanoate) have been studied by rheological techniques. The gel elasticities were determined as a function of surfactant concentration and surfactant type. The fractal dimension of the formed structures was evaluated from plots of storage modulus against surfactant concentration. The role of electrostatic, hydrophobic and disulfide SS interactions in these systems has been demonstrated to be the predominant. The viscosity of these structures tends to increase with surfactant concentration, except for the fluorinated one. Unfolded ovalbumin molecules tend to form fibrillar structures that tend to increase with surfactant concentration, except for the fluorinated one. This fact has been related to the particular nature of this molecule.

  12. Physical properties of botanical surfactants.

    Science.gov (United States)

    Müller, Lillian Espíndola; Schiedeck, Gustavo

    2017-08-24

    Some vegetal species have saponins in their composition with great potential to be used as natural surfactants in organic crops. This work aims to evaluate some surfactants physical properties of Quillaja brasiliensis and Agave angustifolia, based on different methods of preparation and concentration. The vegetal samples were prepared by drying and grinding, frozen and after chopped or used fresh and chopped. The neutral bar soap was used as a positive control. The drying and grinding of samples were the preparation method that resulted in higher foam column height in both species but Q. brasiliensis was superior to A. angustifolia in all comparisons and foam index was 2756 and 1017 respectively. Critical micelle concentration of Q. brasiliensis was 0.39% with the superficial tension of 54.40mNm(-1) while neutral bar soap was 0.15% with 34.96mNm(-1). Aspects such as genetic characteristics of the species, environmental conditions, and analytical methods make it difficult to compare the results with other studies, but Q. brasiliensis powder has potential to be explored as a natural surfactant in organic farming. Not only the surfactants physical properties of botanical saponins should be taken into account but also its effect on insects and diseases control when decided using them. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. Profiling the PM2.5 mass concentration vertical distribution in the boundary layer

    OpenAIRE

    2015-01-01

    Fine particle (PM2.5) affects human life and activities directly; the detection of PM2.5 mass concentration profile is very essential due to its practical and scientific meanings (such as, quantifying of air quality and its variability, and improving air quality forecast and assessment). But so far, it is difficult to detect PM2.5 mass concentration profile. The proposed methodology to study the relationship between aerosol extinction coefficient and PM2.5 mass concentratio...

  14. Experimental investigation of a nanofluid absorber employed in a low-profile, concentrated solar thermal collector

    Science.gov (United States)

    Li, Qiyuan; Zheng, Cheng; Mesgari, Sara; Hewakuruppu, Yasitha L.; Hjerrild, Natasha; Crisostomo, Felipe; Morrison, Karl; Woffenden, Albert; Rosengarten, Gary; Scott, Jason A.; Taylor, Robert A.

    2015-12-01

    Recent studies [1-3] have demonstrated that nanotechnology, in the form of nanoparticles suspended in water and organic liquids, can be employed to enhance solar collection via direct volumetric absorbers. However, current nanofluid solar collector experimental studies are either relevant to low-temperature flat plate solar collectors (100 °C) indoor laboratory-scale concentrating solar collectors [1, 5]. Moreover, many of these studies involve in thermal properties of nanofluid (such as thermal conductivity) enhancement in solar collectors by using conventional selective coated steel/copper tube receivers [6], and no full-scale concentrating collector has been tested at outdoor condition by employing nanofluid absorber [2, 6]. Thus, there is a need of experimental researches to evaluate the exact performance of full-scale concentrating solar collector by employing nanofluids absorber at outdoor condition. As reported previously [7-9], a low profile (solar thermal concentrating collector was designed and analysed which can potentially supply thermal energy in the 100-250 °C range (an application currently met by gas and electricity). The present study focuses on the design and experimental investigation of a nanofluid absorber employed in this newly designed collector. The nanofluid absorber consists of glass tubes used to contain chemically functionalized multi-walled carbon nanotubes (MWCNTs) dispersed in DI water. MWCNTs (average diameter of 6-13 nm and average length of 2.5-20 μm) were functionalized by potassium persulfate as an oxidant. The nanofluids were prepared with a MCWNT concentration of 50 +/- 0.1 mg/L to form a balance between solar absorption depth and viscosity (e.g. pumping power). Moreover, experimentally comparison of the thermal efficiency between two receivers (a black chrome-coated copper tube versus a MWCNT nanofluid contained within a glass tubetube) is investigated. Thermal experimentation reveals that while the collector efficiency

  15. Fluorescence emission of pyrene in surfactant solutions.

    Science.gov (United States)

    Piñeiro, Lucas; Novo, Mercedes; Al-Soufi, Wajih

    2015-01-01

    The systematic description of the complex photophysical behaviour of pyrene in surfactant solutions in combination with a quantitative model for the surfactant concentrations reproduces with high accuracy the steady-state and the time resolved fluorescence intensity of pyrene in surfactant solutions near the cmc, both in the monomer and in the excimer emission bands. We present concise model equations that can be used for the analysis of the pyrene fluorescence intensity in order to estimate fundamental parameters of the pyrene-surfactant system, such as the binding equilibrium constant K of pyrene to a given surfactant micelle, the rate constant of excimer formation in micelles, and the equilibrium constant of pyrene-surfactant quenching. The values of the binding equilibrium constant K(TX100)=3300·10³ M⁻¹ and K(SDS)=190·10³ M⁻¹ for Triton X-100 (TX100) and SDS micelles, respectively, show that the partition of pyrene between bulk water and micelles cannot be ignored, even at relatively high surfactant concentrations above the cmc. We apply the model to the determination of the cmc from the pyrene fluorescence intensity, especially from the intensity ratio at two vibronic bands in the monomer emission or from the ratio of excimer to monomer emission intensity. We relate the finite width of the transition region below and above the cmc with the observed changes in the pyrene fluorescence in this region.

  16. An Investigation of CNT Cytotoxicity by Using Surfactants in Different Ratio

    Science.gov (United States)

    Kumar, Sandeep; Kumar, Neeraj; Thakur, Rajesh; Bhanjana, Gaurav; Dilbaghi, Neeraj

    2011-12-01

    This account reports a comparative analysis on dispersion of multiwalled and single walled carbon nanotubes with different surfactants like—Triton X-100, Tween 20, Tween 80, and sodium dodecyl sulfate (SDS). Dispersion of CNTs has been characterized by UV-Vis spectroscopy, electron microscopy and probe microscopy. An optimum CNT-to-surfactant ratio has been determined for each surfactant. Surfactant concentration in different ratio is found to deteriorate the quality of nanotube dispersion. Electron microscopy analysis of a high-surfactant sample concentration enables us to construct a plausible mechanism for increase or decrease in CNT dispersion at high surfactant concentration.

  17. The potential of LIRIC to validate the vertical profiles of the aerosol mass concentration estimated by an air quality model

    Science.gov (United States)

    Siomos, Nikolaos; Filoglou, Maria; Poupkou, Anastasia; Liora, Natalia; Dimopoulos, Spyros; Melas, Dimitris; Chaikovsky, Anatoli; Balis, Dimitris

    2015-04-01

    Vertical profiles of the aerosol mass concentration derived by a retrieval algorithm that uses combined sunphotometer and LIDAR data (LIRIC) were used in order to validate the mass concentration profiles estimated by the air quality model CAMx. LIDAR and CIMEL measurements of the Laboratory of Atmospheric Physics of the Aristotle University of Thessaloniki were used for this validation.The aerosol mass concentration profiles of the fine and coarse mode derived by CAMx were compared with the respective profiles derived by the retrieval algorithm. For the coarse mode particles, forecasts of the Saharan dust transportation model BSC-DREAM8bV2 were also taken into account. Each of the retrieval algorithm's profiles were matched to the models' profile with the best agreement within a time window of four hours before and after the central measurement. OPAC, a software than can provide optical properties of aerosol mixtures, was also employed in order to calculate the angstrom exponent and the lidar ratio values for 355nm and 532nm for each of the model's profiles aiming in a comparison with the angstrom exponent and the lidar ratio values derived by the retrieval algorithm for each measurement. The comparisons between the fine mode aerosol concentration profiles resulted in a good agreement between CAMx and the retrieval algorithm, with the vertical mean bias error never exceeding 7 μgr/m3. Concerning the aerosol coarse mode concentration profiles both CAMx and BSC-DREAM8bV2 values are severely underestimated, although, in cases of Saharan dust transportation events there is an agreement between the profiles of BSC-DREAM8bV2 model and the retrieval algorithm.

  18. Quantitative Structure-Property Relationship of the Critical Micelle Concentration of Different Classes of Surfactants%多种类表面活性剂临界胶束浓度定量构效关系

    Institute of Scientific and Technical Information of China (English)

    朱志臣; 王强; 贾青竹; 汤红梅; 马沛生

    2013-01-01

      表面活性剂的临界胶束浓度(CMC)是个非常重要的物质特性参数, CMC在研究表面活性剂的工业应用和生物利用方面发挥着关键作用.本工作提出了一个新的拓扑指数—扩展距离矩阵,建立了一个稳定的构效关系模型,并对175种表面活性剂的临界胶束浓度进行了计算预测.结果表明,基于新的拓扑指数建立的构效关系模型计算临界胶束浓度能给出稳定可靠的预测结果,其预测结果相关性系数R2(training set)=0.9295,平均相对偏差ARD(training set)=8.20%, R2(testing set)=0.9257, ARD(testing set)=6.76%.与文献中模型预测结果的对比表明,本工作在稳定性和可靠性上均有显著改善.%Critical micel e concentration (CMC) is one of the most useful parameters for the characterization of surfactants; thus, CMC plays an important role in the investigation of the surfactantsʹproperties for industrial applications and biological utilizations. The fol owing study presents a stable and accurate structure-property relationship model for the prediction of CMC for a diverse set of 175 surfactants using a new topological index, the extended distance matrix. Research indicates that the new model based on this topological index is very efficient and provides satisfactory results. The high-quality prediction model is evidenced by an R2 (square correlation coefficient) value of 0.9295 and an average relative difference (ARD) value of 8.20% for the training set, an R2 value of 0.9257 and an ARD value of 6.76% for the testing set. Comparison results with reference models demonstrate that this new method based on the topological index results in significant improvements, both in accuracy and stability for predicting CMC of surfactants.

  19. Effect of surfactant concentration in the electrolyte on the tribological properties of nickel-tungsten carbide composite coatings produced by pulse electro co-deposition

    Science.gov (United States)

    Kartal, Muhammet; Uysal, Mehmet; Gul, Harun; Alp, Ahmet; Akbulut, Hatem

    2015-11-01

    A nickel plating bath containing WC particles was used to obtain hard and wear-resistant particle reinforced Ni/WC MMCs on steel surfaces for anti-wear applications. Copper substrates were used for electro co-deposition of Ni matrix/WC with the particle size of nickel films were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The effects of the surfactant on the zeta potential, co-deposition and distribution of WC particles in the nickel matrix, as well as the tribological properties of composite coatings were also investigated. The tribological behaviors of the electrodeposited WC composite coatings sliding against M50 steel ball (Ø 10 mm) were examined on a CSM Instrument. All friction and wear tests were performed without lubrication at room temperature and in the ambient air (relative humidity 55-65%).

  20. Timescales of spherulite crystallization in obsidian inferred from water concentration profiles

    Energy Technology Data Exchange (ETDEWEB)

    Castro, Jonathan M.; Beck, Pierre; Tuffen, Hugh; Nichols, Alexander R.L.; Dingwell, Donald B.; Martin, Michael C

    2008-06-25

    We determined the kinetics of spherulite growth in obsidians from Krafla volcano, Iceland. We measured water concentration profiles around spherulites in obsidian by synchrotron Fourier transform infrared spectroscopy. The distribution of OH? groups surrounding spherulites decreases exponentially away from the spherulite-glass border, reflecting expulsion of water during crystallization of an anhydrous paragenesis (plagioclase + SiO2 + clinopyroxene + magnetite). This pattern is controlled by a balance between the growth rate of the spherulites and the diffusivity of hydrous solute in the rhyolitic melt. We modeled advective and diffusive transport of the water away from the growing spherulites by numerically solving the diffusion equation with a moving boundary. Numerical models fit the natural data best when a small amount of post-growth diffusion is incorporated in the model. Comparisons between models and data constrain the average spherulite growth rates for different temperatures and highlight size-dependent growth among a small population of spherulites.

  1. Estimation of suspended sediment concentrations using Pulse-coherent Acoustic Doppler Profiler (PCADP)

    Institute of Scientific and Technical Information of China (English)

    BAI Xiufang; LI Siren; GONG Dejun; XU Yongping; JIANG Jingbo

    2009-01-01

    The objective of the study is to investigate the suitability of using Pulse-coherent Acoustic Doppler Profiler (PCADP) to estimate suspended sediment concentration (SSC). The acoustic backscatter intensity was corrected for spreading and absorption loss, then calibrated with OBS and finally converted to SSC. The results show that there is a good correlation between SSC and backscatter intensity with R value of 0.74. The mean relative error is 22.4%. Then the time span of little particle size variation was also analyzed to exclude the influence of size variation. The correlation coefficient increased to 0.81 and the error decreased to 18.9%. Our results suggest that the PCADP can meet the requirement of other professional instruments to estimate SSC with the errors between 20% and 50%, and can satisfy the need of dynamics study of suspended particles.

  2. Molecular-thermodynamic theory of micellization of multicomponent surfactant mixtures: 2. pH-sensitive surfactants.

    Science.gov (United States)

    Goldsipe, Arthur; Blankschtein, Daniel

    2007-05-22

    In article 1 of this series, we developed a molecular-thermodynamic (MT) theory to model the micellization of mixtures containing an arbitrary number of conventional (pH-insensitive) surfactants. In this article, we extend the MT theory to model mixtures containing a pH-sensitive surfactant. The MT theory was validated by examining mixtures containing both a pH-sensitive surfactant and a conventional surfactant, which effectively behave like ternary surfactant mixtures. We first compared the predicted micellar titration data to experimental micellar titration data that we obtained for varying compositions of mixed micelles containing the pH-sensitive surfactant dodecyldimethylamine oxide (C12DAO) mixed with either a cationic surfactant (dodecyltrimethylammonium bromide, C12TAB), a nonionic surfactant (dodecyl octa(ethylene oxide), C12E8), or an anionic surfactant (sodium dodecyl sulfate, SDS) surfactant. The MT theory accurately modeled the titration behavior of C12DAO mixed with C12E8. However, C12DAO was observed to interact more favorably with SDS and with C12TAB than was predicted by the MT theory. We also compared predictions to data from the literature for mixtures of C12DAO and SDS. Although the pH values of solutions with no added acid were modeled with only qualitative accuracy, the MT theory resulted in quantitatively accurate predictions of solution pH for mixtures containing added acid. In addition, the predicted degree of counterion binding yielded a lower bound to the experimentally measured value. Finally, we predicted the critical micelle concentration (cmc) of solutions of two pH-sensitive surfactants, tetradecyldimethylamine oxide (C14DAO) and hexadecyldimethyl betaine (C16Bet), at varying solution pH and surfactant composition. However, at the pH values considered, the pH sensitivity of C16Bet could be neglected, and it was equivalently modeled as a zwitterionic surfactant. The cmc's predicted using the MT theory agreed well with the experimental

  3. A novel cloud point extraction approach using cationic surfactant for the separation and pre-concentration of chromium species in natural water prior to ICP-DRC-MS determination.

    Science.gov (United States)

    Meeravali, Noorbasha N; Jiang, Shiuh-Jen

    2009-11-15

    A novel cloud point phase separation of cationic surfactant, Aliquat-336 and capabilities of its reactive solubilizing sites for selective extraction of chromium species at ultra trace levels was examined in natural water. The phase separation behavior of Aliquat-336 is studied with various additives. The nonionic surfactant, Triton X-114 was found to induce the cloud point phase separation of Aliquat-336. The separation of anionic Cr(VI) was enabled by the formation of ion associate with quaternary ammonium head group of Aliquat-336 at pH 2, and the recovery of Cr(VI) and Cr(III) were 101.4+/-1.4% and 2.2+/-0.4%, respectively at 0.5-1 ng mL(-1), Total Cr was pre-concentrated as Cr-APDC species using the hydrophobic tail group at pH 6.5. The Cr(III) concentration was obtained by subtracting Cr(VI) from total Cr. The recovery of total Cr was 99.5+/-1.2%. Parameters affecting extraction were assessed. The procedure was applied to NIST 1643c and NIST 1643d waters, and the sum of individual species obtained was compared with the certified chromium values. The method was also applied to various natural waters with limits of detection and pre-concentration factor of 0.010 and 0.025 ng mL(-1); 10 and 10, respectively, for Cr(VI) and Cr(III)-APDC using ICP-MS operated in DRC mode.

  4. Foaming behaviour of polymer-surfactant solutions

    Energy Technology Data Exchange (ETDEWEB)

    Cervantes-MartInez, Alfredo [Departamento de Investigacion en PolImeros y Materiales, Universidad de Sonora, Apartado Postal 130, 83000 Hermosillo, Sonora (Mexico); Maldonado, Amir [Departamento de Fisica, Universidad de Sonora, Apartado Postal 1626, 83000 Hermosillo, Sonora (Mexico)

    2007-06-20

    We study the effect of a non-ionic amphiphilic polymer (PEG-100 stearate also called Myrj 59) on the foaming behaviour of aqueous solutions of an anionic surfactant (sodium dodecyl sulfate or SDS). The SDS concentration was kept fixed while the Myrj 59 concentration was varied. Measurements of foamability, surface tension and electrical conductivity were carried out. The results show two opposite effects depending on the polymer concentration: foamability is higher when the Myrj 59 concentration is low; however, it decreases considerably when the polymer concentration is increased. This behaviour is due to the polymer adsorption at the air/liquid interface at lower polymer concentrations, and to the formation of a polymer-surfactant complex in the bulk at higher concentrations. The results are confirmed by surface tension and electrical conductivity measurements, which are interpreted in terms of the microstructure of the polymer-surfactant solutions. The observed behaviour is due to the amphiphilic nature of the studied polymer. The increased hydrophobicity of Myrj 59, compared to that of water-soluble polymers like PEG or PEO, increases its 'reactivity' towards SDS, i.e. the strength of its interaction with this anionic surfactant. Our results show that hydrophobically modified polymers have potential applications as additives in order to control the foaming properties of surfactant solutions.

  5. The relationships between serum fructosamine concentrations and lipid profiles in community-dwelling adults.

    Science.gov (United States)

    Peng, You-Fan; Wei, Ye-Sheng

    2017-07-31

    We examined the epidemiological associations between serum fructosamine and dyslipidemia indices in community-dwelling adults. Clinical characteristics and lipid profiles were analyzed in 1352 community-dwelling adults. The demographic characteristics and laboratory results were grouped according to the quartiles of serum fructosamine concentrations in all eligible individuals. From the bottom to the top quartile of serum fructosamine, there were graded increases in age, total cholesterol (TC), fasting blood glucose (FBG), total protein (TP), triglyceride (TG), total cholesterol/ high density lipoprotein-cholesterol (TC/HDL-C) and atherogenic index of plasma (AIP). Serum fructosamine was positive correlated with age, TC, FBG, TP, TG, TC/HDL-C and AIP in whole individuals. The positive correlations were then observed in both genders between serum fructosamine and TC, FBG, TP, TG. Two dominant factors were identified by principal component analysis. Logistic regression analysis showed that the two factors were associated with increased serum fructosamine with adjustment for gender, age, body mass index (BMI), FBG and TP. The similar results were observed in males, but not in females. Dyslipidemia tends to contribute to increased serum fructosamine concentrations in study population, suggesting that elevated serum fructosamine may herald an increased risk of cardiovascular disease among community-dwelling adults, especially in males.

  6. Transcriptome profiling of the microalga Chlorella pyrenoidosa in response to different carbon dioxide concentrations.

    Science.gov (United States)

    Sun, Xue; Shen, Jia; Bai, Fengwei; Xu, Nianjun

    2016-10-01

    To enrich our knowledge of carbon dioxide (CO2)-concentrating mechanism (CCM) in eukaryotic algae, we used high-throughput sequencing to investigate the transcriptome profiling of the microalga Chlorella pyrenoidosa (Chlorophyta) response to different CO2 levels. Altogether, 53.86 million (M) and 62.10M clean short reads of 100 nucleotides (nt) were generated from this microalga cultured at 4-fold air CO2 (control) and air CO2 concentrations by Illumina sequencing. A total of 32,662 unigenes were assembled from the two pooled samples. With an E-value cut-off of 1e-5, 9590, 6782, 5954, and 9092 unigenes were annotated in NR, Gene Ontology (GO), Eukaryotic Cluster of Orthologous Groups of proteins (KOG), and Kyoto Encyclopedia of Genes and Genomes (KEGG) databases, respectively. After screening, 51 differentially expressed unigenes were up-regulated and 8 were down-regulated in the air CO2 group, relative to the control. The transcript levels of eight differentially expressed unigenes were validated by real-time quantitative PCR, which manifested that thioredoxin-like protein, laminin subunit beta-1, and chlorophyll a/b binding protein might be associated with the utilization of inorganic carbon at low CO2 levels.

  7. STRUCTURE AND MORPHOLOGY CHANGES OF HYDROBIOTITES MODIFIED BY CATIONIC SURFACTANTS

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    In this study, X-ray diffraction (XRD), Fourier transform infrared spectrometer (FTIR) together with Scanning probe microscopy (SPM) were used to characterize the structure and morphology of the complexes, where the hydrobiotites (Xinjiang) were modified by single-chain surfactants octyltrimethylammonium bromide (OTMA) and octadecyltrimethylammonium bromide (ODTMA). XRD patterns showed that the structure of complexes was significantly influenced by the surfactant concentration and the alkyl chain length, because obvious changes took place in the basal spacing. Furthermore, according to the XRD results, several arrangements of surfactant molecules within the hydrobiotite interlayer space were deduced. The FTIR spectrum indicated that the surfactant contents in complexes dramatically increased with the alkyl chain length. The SPM micrographs demonstrated that the surfaces of complexes prepared at lower surfactant concentration were relatively flat compared with that prepared at higher concentration, while those with higher surfactant concentration had much steeper surface due to the alkyl chain length. It was concluded that structure and morphology of surfactant/hydrobiotite complexes depend not only on the surfactant concentration, but also strongly on the surfactant species.

  8. Gamma-ray-based measurement of concentration distribution in pipe flow of settling slurry: vertical profiles and tomographic maps

    Directory of Open Access Journals (Sweden)

    Krupička Jan

    2014-06-01

    Full Text Available Principles of gamma-ray-based measurement are summarized and their application is demonstrated on an operation of the radiometric facility installed in the test loop for slurry flows at the Institute of Hydrodynamics. The facility is able to measure vertical profiles of chord-averaged concentrations and concentration maps in the pipe cross section. A methodology of measurement is proposed including detection and quantification of random and systematic errors. Experimental results are discussed in the light of the proposed methodology. Experimentally determined vertical profiles of concentration are presented for slurry flows of four different fractions of glass beads. The tomographic application of the radiometric device is demonstrated on a measured concentration map and a suitable image reconstruction method is tested. High reliability of measured concentration distributions is proved except for regions near the pipe wall. The radiometric method is shown to be a useful tool for measurement of concentration distribution in slurry flow through a pipe.

  9. Binding of alkylpyridinium chloride surfactants to sodium polystyrene sulfonate

    NARCIS (Netherlands)

    Ishiguro, M.; Koopal, L.K.

    2009-01-01

    Binding of cationic surfactants to anionic polymers is well studied. However, the surfactant binding characteristics at very low concentration near the start of binding and at high concentration, where charge compensation may Occur. are less well known. Therefore, the binding characteristics of

  10. Synthesis and properties evaluation of sulfobetaine surfactant with double hydroxyl

    Science.gov (United States)

    Zhou, Ming; Luo, Gang; Zhang, Ze; Li, Sisi; Wang, Chengwen

    2017-09-01

    A series of sulfobetaine surfactants {N-[(3-alkoxy-2-hydroxyl)propoxy] ethyl-N,N-dimethyl-N-(2-hydroxyl)propyl sulfonate} ammonium chloride were synthesized with raw materials containing linear saturated alcohol, N,N-dimethylethanolamine, sodium 3-chloro-2-hydroxyl propane sulfonic acid and epichlorohydrin. The molecule structures of sulfobetaine surfactants were characterized by FTIR, 1HNMR and elemental analysis. Surface tension measurements can provide us information about the surface tension at the CMC (γCMC), pC20, Γmax and Amin. The pC20 values of sulfobetaine surfactants increase with the hydrophobic chain length increasing. Amin values of the surfactants decrease with increasing hydrophobic chain length from 10 to 14. The critical micelle concentration (CMC) and surface tension (γCMC) values of the sulfobetaine surfactants decrease with increasing hydrophobic chain length from 10 to 16. The lipophilicity of surfactant was enhanced with the increase of the carbon chain, however, the ability of anti-hard water was weakened. The minimum oil/water interfacial tension of four kinds of sulfobetaine surfactants is 10-2-10-3 mN/m magnitude, which indicates that the synthesized bis-hydroxy sulfobetaine surfactants have a great ability to reduce interfacial tension in the surfactant flooding system. The surface tension (γCMC) values of synthesized surfactants were lower compared with conventional anionic surfactant sodium dodecyl sulfonate.

  11. Anaerobic Biodegradation of Detergent Surfactants

    OpenAIRE

    Erich Jelen; Ute Merrettig-Bruns

    2009-01-01

    Detergent surfactantscan be found in wastewater in relevant concentrations. Most of them are known as ready degradable under aerobic conditions, as required by European legislation. Far fewer surfactants have been tested so far for biodegradability under anaerobic conditions. The natural environment is predominantly aerobic, but there are some environmental compartments such as river sediments, sub-surface soil layer and anaerobic sludge digesters of wastewater treatment plants which have str...

  12. Microemulsion-based lycopene extraction: Effect of surfactants, co-surfactants and pretreatments.

    Science.gov (United States)

    Amiri-Rigi, Atefeh; Abbasi, Soleiman

    2016-04-15

    Lycopene is a potent antioxidant that has received extensive attention recently. Due to the challenges encountered with current methods of lycopene extraction using hazardous solvents, industry calls for a greener, safer and more efficient process. The main purpose of present study was application of microemulsion technique to extract lycopene from tomato pomace. In this respect, the effect of eight different surfactants, four different co-surfactants, and ultrasound and enzyme pretreatments on lycopene extraction efficiency was examined. Experimental results revealed that application of combined ultrasound and enzyme pretreatments, saponin as a natural surfactant, and glycerol as a co-surfactant, in the bicontinuous region of microemulsion was the optimal experimental conditions resulting in a microemulsion containing 409.68±0.68 μg/glycopene. The high lycopene concentration achieved, indicates that microemulsion technique, using a low-cost natural surfactant could be promising for a simple and safe separation of lycopene from tomato pomace and possibly from tomato industrial wastes.

  13. Air Stripping of Ammonia from High-concentration Ammonia Wastewater with Surfactant as Third Component%气流与第三方物质交互解吸高浓度氨氮废水的研究

    Institute of Scientific and Technical Information of China (English)

    龚凡杰; 王光华; 孙明东; 鲁云洲; 荣先萍; 刘铁军

    2012-01-01

    An experiment was conducted on a bench-scale packed tower used as an air stripper, with a kind of surfactant added as the third component, to remove ammonia from a stream of high-concentration ammonia waste water. Parameters, including pH, temperature, n( volume ratio of air to liquid )and ρ( dose of the surfactant added), were studied about their influences on stripping efficiency, and the result showed addition of the surfactant could increase ammonia removal efficiency by 2%. Eventually, the experiment led to the optimum condition for ammonia stripping in terms of temperature and pH, with the ammonia concentration after treatment as low as that needed for the consequent secondary biological treatment of wastewater.%利用填料塔作为吹脱解吸设备,结合表面活性剂增强传质的特点,选取表面活性剂作为第三方物质,以空气作为气流吹脱解吸废水中的高浓度氨氮.实验研究了废水温度T、pH值、气液比n、表面活性剂种类和投加量ρ等条件变化对氨氮解吸效率η的影响.结果表明:加入表面活性剂X后,氨氮脱除效率提高2%;影响解吸效率因素的主次顺序为pH>T>n>ρ;最佳操作条件为T=80℃、pH=11.0、ρ=15 mg/L、n=650∶1.在最佳的操作条件下,处理氨氮含量为2159.0 mg/L和3680.5 mg/L的废水时,解吸效率分别达到95.28%和94.69%,即废水最终的氨氮浓度为102.0 mg/L和195.5 mg/L,低于废水后续生化处理进水指标中对氨氮含量的要求.

  14. Surfactants in tribology

    CERN Document Server

    Biresaw, Girma

    2014-01-01

    Surface science and tribology play very critical roles in many industries. Manufacture and use of almost all consumer and industrial products rely on the application of advanced surface and tribological knowledge. The fourth in a series, Surfactants in Tribology, Volume 4 provides an update on research and development activities connecting surfactants and tribological phenomena. Written by renowned subject matter experts, the book demonstrates how improved design of surfactants can be harnessed to control tribological phenomena. Profusely illustrated and copiously referenced, the chapters also

  15. Branched alkyl alcohol propoxylated sulfate surfactants for improved oil recovery

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Y.; Iglauer, S.; Shuler, P.; Tang, Y. [California Institute of Technology, Covina, CA (US). Power, Environmental and Energy Research (PEER) Center; Goddard, W.A. III [California Institute of Technology, Pasadena, CA (United States). Materials and Process Simulation Center

    2010-05-15

    This investigation considers branched alkyl alcohol propoxylated sulfate surfactants as candidates for chemical enhanced oil recovery (EOR) applications. Results show that these anionic surfactants may be preferred candidates for EOR as they can be effective at creating low interfacial tension (IFT) at dilute concentrations, without requiring an alkaline agent or cosurfactant. In addition, some of the formulations exhibit a low IFT at high salinity, and hence may be suitable for use in more saline reservoirs. Adsorption tests onto kaolinite clay indicate that the loss of these surfactants can be comparable to or greater than other types of anionic surfactants. Surfactant performance was evaluated in oil recovery core flood tests. Selected formulations recovered 35-50% waterflood residual oil even with dilute 0.2 wt% surfactant concentrations from Berea sandstone cores. (orig.)

  16. Gemini imidazolium surfactants: synthesis and their biophysiochemical study.

    Science.gov (United States)

    Kamboj, Raman; Singh, Sukhprit; Bhadani, Avinash; Kataria, Hardeep; Kaur, Gurcharan

    2012-08-21

    New gemini imidazolium surfactants 9-13 have been synthesized by a regioselective epoxy ring-opening reaction under solvent-free conditions. The surface properties of these new gemini surfactants were evaluated by surface tension and conductivity measurements. These surfactants have been found to have low critical micelle concentration (cmc) values as compared to other categories of gemini cationic surfactants and also showed the tendency to form premicellar aggregates in solution at sufficiently low concentration below their cmc values. The thermal degradation of these surfactants was determined by thermograviometry analysis (TGA). These new cationic surfactants have a good DNA binding capability as determined by agarose gel electrophoresis and ethidium bromide exclusion experiments. They have also been found to have low cytotoxicity by MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay on the C6 glioma cell line.

  17. Effects of silicon surfactant in rigid polyurethane foams

    Directory of Open Access Journals (Sweden)

    2008-03-01

    Full Text Available The rigid polyurethane foams (RPUFs have been fabricated from high functional crude 4,4’-di-phenylmethane diisocyanate (CMDI and polypropylene glycols (PPGs for a wide range of surfactant concentration with an environmently friendly blowing agent (HFC 365mfc. Cream time, gel time, and tack-free time increased with the addition of surfactant. Foam density decreased rapidly to a minimum at 0.5 pphp (part per hundred polyol surfactant due to the increased blowing efficiency with surfactant. Surface tension rapidly decreased to an asymptotic value at 2 pphp surfactant. In accordance with this, cell size decreased and closed cell content increased rapidly to constant values at low surfactant concentrations (<1 pphp. The decrease of cell size was accompanied by the decrease of thermal conductivity to give a linear relatiohship between the two implying that the series model of heat transfer is applicable.

  18. POLYMERIC SURFACTANT STRUCTURE

    Institute of Scientific and Technical Information of China (English)

    P.M. Saville; J.W. White

    2001-01-01

    Polymeric surfactants are amongst the most widespread of all polymers. In nature, proteins and polysaccharides cause self organization as a result of this surfactancy; in industry, polymeric surfactants play key roles in the food, explosives and surface coatings sectors. The generation of useful nano- and micro-structures in films and emulsions as a result of polymer amphiphilicity and the application of mechanical stress is discussed. The use of X-ray and neutron small angle scattering and reflectivity to measure these structures and their dynamic properties will be described. New results on linear and dendritic polymer surfactants are presented.

  19. Dendrimer-surfactant interactions.

    Science.gov (United States)

    Cheng, Yiyun; Zhao, Libo; Li, Tianfu

    2014-04-28

    In this article, we reviewed the interactions between dendrimers and surfactants with particular focus on the interaction mechanisms and physicochemical properties of the yielding dendrimer-surfactant aggregates. In order to provide insight into the behavior of dendrimers in biological systems, the interactions of dendrimers with bio-surfactants such as phospholipids in bulk solutions, in solid-supported bilayers and at the interface of phases or solid-states were discussed. Applications of the dendrimer-surfactant aggregates as templates to guide the synthesis of nanoparticles and in drug or gene delivery were also mentioned.

  20. Surfactant Sector Needs Urgent Readjustment

    Institute of Scientific and Technical Information of China (English)

    Huang Hongzhou

    2007-01-01

    @@ Surfactant industrial system has been basically established After 50 years' development, China has already established a surfactant industrial system with a relatively complete product portfolio and can produce 4714 varieties of surfactants in cationic,anionic, nonionic and amphoteric categories.

  1. Performance of some surfactants as wetting agents

    Energy Technology Data Exchange (ETDEWEB)

    Shalaby, M.N.; El-Shanny, O.A.A. [Egyptian Petroleum Research Institute (EPRI), Cairo (Egypt). Evaluation and Analysis Dept.

    2005-12-01

    The wetting power of anionic surfactant: sodium dodecyl sulfate (SDS), and nonionic surfactants: polyoxyethelene(14)monolaurate [La(EO){sub 14}] and polyoxyethelene(14)monoeleate [OI(EO){sub 14}] has been studied to determine their performance as wetting agents. The study reveals that the nonionic compound with a long hydrophobic chain exhibits higher wettability than the shorter one when used at very low cocentrations (below CMC) and the reverse is shown with high concentrations (above CMC). the wetting power of the investigated surfactants increases as the CMC values increases. In case of the nonionic compounds and at surfactant concentrations equal their CMC values, OI(EO){sub 14} shows a higher wetting power than La(EO){sub 14} while is possesses a lower HLB value. The anionic surfactant shows an optimum wetting in comparison with the tested nonionic one. The wettability of all the investigated samples increases as the surface tension of their solutions increases to the allowed limit that can be reached in the presence of surfactant. (orig.)

  2. [Liposome phospholipid substitution and lung function in surfactant deprived rats].

    Science.gov (United States)

    Obladen, M

    1985-01-01

    In vivo activity of an artificial surfactant was studied in surfactant depleted rats. After tenfold alveolar lavage, PaO2, tidal volume, and compliance of the respiratory system fell to one third of initial value. Substitution of large unilamellar vesicles containing 90% Dipalmitoylphosphatidylcholine and 10% unsaturated phosphatidylglycerol largely restored oxygenation and lung mechanics in most animals. Complete normalization with weaning from the ventilator, however, was achieved neither with liposomes nor with natural surfactant concentrate.

  3. Magnetic depth profile in GaMnAs layers with vertically graded Mn concentrations

    Energy Technology Data Exchange (ETDEWEB)

    Leiner, J., E-mail: leinerjc@ornl.gov [Oak Ridge National Laboratory, Oak Ridge, TN 37831 (United States); Kirby, B.J. [Center for Neutron Research, NIST, Gaithersburg, MD 20899 (United States); Fitzsimmons, M.R. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Tivakornsasithorn, K. [Department of Physics, Faculty of Science, Mahidol Univeristy, Bangkok 10400 (Thailand); Liu, X.; Furdyna, J.K.; Dobrowolska, M. [Department of Physics, University of Notre Dame, Notre Dame, IN 46556 (United States)

    2014-01-15

    Controlled vertical grading of magnetization of the ferromagnetic semiconductor GaMnAs represents a significant step toward optimizing its magnetic properties for device applications. Quantitative control of such grading is difficult due to various competing effects, such as Mn diffusion, self-annealing, and diffusion of charge carriers. Furthermore, there are also several surface effects that can influence the magnetization profile, which should be considered in designing and fabricating graded GaMnAs specimens. However, we show that vertical magnetization gradients in GaMnAs layers can be readily achieved by appropriate growth strategies. In this paper we describe the preparation, magnetization measurements, and polarized neutron reflectometry studies of vertically graded GaMnAs layers, which provide direct evidence that vertical grading of Mn concentration has been successfully achieved in our GaMnAs samples. Our measurements also indicate that these graded samples exhibit magnetic “hardening” near the surface. - Highlights: • Controlled vertical grading of the magnetization ferromagnetic semiconductors represents a significant step toward optimizing its magnetic properties for device applications. • Quantitative control of such grading is difficult due to various competing effects, such as Mn diffusion, self-annealing, and diffusion of charge carriers. • We show (via SQUID and Polarized Neutron Scattering) that vertical magnetization gradients in GaMnAs layers can be readily achieved by appropriate MBE growth strategies. • Our measurements also indicate that these graded samples exhibit magnetic “hardening” near the surface.

  4. Effects of dietary gossypol concentration on growth performance, blood profiles, and hepatic histopathology in meat ducks.

    Science.gov (United States)

    Zeng, Q F; Yang, G L; Liu, G N; Wang, J P; Bai, S P; Ding, X M; Luo, Y H; Zhang, K Y

    2014-08-01

    The objective of this study was to determine the effects of gossypol from cottonseed meal (CSM) on growth performance, blood biochemical profiles, and liver histopathology of ducks. A total of 900 1-d-old ducks were randomly allocated to 5 treatments with 12 pens/treatment and 15 ducks/pen. The 5 experimental diets were formulated in such a way that 0% (a corn-soybean meal basal diet, diet 1), 25% (diet 2), 50% (diet 3), 75% (diet 4), and 100% (diet 5) of protein from soybean meal were replaced with that from CSM. All diets were formulated on a digestible amino acid basis. The experiment included 2 phases, the starter phase (1 to 3 wk) where the test diets contained graded levels of CSM and the growth phase (4 to 5 wk) where birds were fed a corn-soybean basal diet to examine the recovery of ducks after CSM withdrawal. Dietary CSM and gossypol linearly (P ducks among all treatments. These results suggest that meat ducks' dietary TG and FG concentration should be lower than 928.9 and 77.2 mg/kg, respectively, during d 1 to 21 of age and that a 2-wk withdrawal of diets containing gossypol should be considered.

  5. User characteristics and effect profile of Butane Hash Oil: An extremely high-potency cannabis concentrate.

    Science.gov (United States)

    Chan, Gary C K; Hall, Wayne; Freeman, Tom P; Ferris, Jason; Kelly, Adrian B; Winstock, Adam

    2017-09-01

    Recent reports suggest an increase in use of extremely potent cannabis concentrates such as Butane Hash Oil (BHO) in some developed countries. The aims of this study were to examine the characteristics of BHO users and the effect profiles of BHO. Anonymous online survey in over 20 countries in 2014 and 2015. Participants aged 18 years or older were recruited through onward promotion and online social networks. The overall sample size was 181,870. In this sample, 46% (N=83,867) reported using some form of cannabis in the past year, and 3% reported BHO use (n=5922). Participants reported their use of 7 types of cannabis in the past 12 months, the source of their cannabis, reasons for use, use of other illegal substances, and lifetime diagnosis for depression, anxiety and psychosis. Participants were asked to rate subjective effects of BHO and high potency herbal cannabis. Participants who reported a lifetime diagnosis of depression (OR=1.15, p=0.003), anxiety (OR=1.72, pcannabis. BHO users also reported stronger negative effects and less positive effects when using BHO than high potency herbal cannabis (pcannabis. Copyright © 2017. Published by Elsevier B.V.

  6. Foaming and foam stability for mixed polymer-surfactant solutions: effects of surfactant type and polymer charge.

    Science.gov (United States)

    Petkova, R; Tcholakova, S; Denkov, N D

    2012-03-20

    Solutions of surfactant-polymer mixtures often exhibit different foaming properties, compared to the solutions of the individual components, due to the strong tendency for formation of polymer-surfactant complexes in the bulk and on the surface of the mixed solutions. A generally shared view in the literature is that electrostatic interactions govern the formation of these complexes, for example between anionic surfactants and cationic polymers. In this study we combine foam tests with model experiments to evaluate and explain the effect of several polymer-surfactant mixtures on the foaminess and foam stability of the respective solutions. Anionic, cationic, and nonionic surfactants (SDS, C(12)TAB, and C(12)EO(23)) were studied to clarify the role of surfactant charge. Highly hydrophilic cationic and nonionic polymers (polyvinylamine and polyvinylformamide, respectivey) were chosen to eliminate the (more trivial) effect of direct hydrophobic interactions between the surfactant tails and the hydrophobic regions on the polymer chains. Our experiments showed clearly that the presence of opposite charges is not a necessary condition for boosting the foaminess and foam stability in the surfactant-polymer mixtures studied. Clear foam boosting (synergistic) effects were observed in the mixtures of cationic surfactant and cationic polymer, cationic surfactant and nonionic polymer, and anionic surfactant and nonionic polymer. The mixtures of anionic surfactant and cationic polymer showed improved foam stability, however, the foaminess was strongly reduced, as compared to the surfactant solutions without polymer. No significant synergistic or antagonistic effects were observed for the mixture of nonionic surfactant (with low critical micelle concentration) and nonionic polymer. The results from the model experiments allowed us to explain the observed trends by the different adsorption dynamics and complex formation pattern in the systems studied.

  7. Evaluation of 1-D tracer concentration profile in a small river by means of Multi-Layer Perceptron Neural Networks

    Directory of Open Access Journals (Sweden)

    A. Piotrowski

    2007-12-01

    Full Text Available The prediction of temporal concentration profiles of a transported pollutant in a river is still a subject of ongoing research efforts worldwide. The present paper is aimed at studying the possibility of using Multi-Layer Perceptron Neural Networks to evaluate the whole concentration versus time profile at several cross-sections of a river under various flow conditions, using as little information about the river system as possible. In contrast with the earlier neural networks based work on longitudinal dispersion coefficients, this new approach relies more heavily on measurements of concentration collected during tracer tests over a range of flow conditions, but fewer hydraulic and morphological data are needed. The study is based upon 26 tracer experiments performed in a small river in Edinburgh, UK (Murray Burn at various flow rates in a 540 m long reach. The only data used in this study were concentration measurements collected at 4 cross-sections, distances between the cross-sections and the injection site, time, as well as flow rate and water velocity, obtained according to the data measured at the 1st and 2nd cross-sections.

    The four main features of concentration versus time profiles at a particular cross-section, namely the peak concentration, the arrival time of the peak at the cross-section, and the shapes of the rising and falling limbs of the profile are modeled, and for each of them a separately designed neural network was used. There was also a variant investigated in which the conservation of the injected mass was assured by adjusting the predicted peak concentration. The neural network methods were compared with the unit peak attenuation curve concept.

    In general the neural networks predicted the main features of the concentration profiles satisfactorily. The predicted peak concentrations were generally better than those obtained using the unit peak attenuation method, and the method with mass

  8. Effects of Surfactant on Solubility and Microbial Conversion of Steroid

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Enhancing the dispersion and dissolution of substrate particles in substrate/water suspension is a feasible way to improve steroid bioconversion. The aim of the present study is to investigate the effects of applying surfactant to microbial conversion system on the dispersion, solubilization and in turn bioconversion of steroid substrate. The model system is hydroxylation of substrate 16α-,17α-epoxy-4-pregnene-3,20-dine by microbial enzymes from Rhizopus nigricanl. The results show that the presence of substrate leads to an increase in critical micelle concentration (CMC) of surfactant PSE compared with the normal CMC of PSE in aqueous solution. The grinding time during substrate suspension preparation affects the substrate aqueous solubility differently with the varied surfactant concentrations while barely making any difference in substrate solubility in the absence of surfactant. The properly prolonged grinding time can make up for the loss in substrate solubility arising from the reduction in surfactant concentration. The surfactant complexes composed of surfactants PSE and MGE at appropriate ratios are screened out with orthodoxy experiment method, the interaction between PSE and MGE exerts the most prominent effects on substrate bioconversion, and the surfactant complexes show more beneficial effects on steroid bioconversion than the surfactant PSE used alone.

  9. Evaluation of passive samplers with neutral or ion-exchange polymer coatings to determine freely dissolved concentrations of the basic surfactant lauryl diethanolamine: Measurements of acid dissociation constant and organic carbon-water sorption coefficient.

    Science.gov (United States)

    Wang, Fang; Chen, Yi; Hermens, Joop L M; Droge, Steven T J

    2013-11-08

    A passive sampler tool (solid-phase microextraction, SPME) was optimized to measure freely dissolved concentrations (Cw,free) of lauryl diethanolamine (C12-DEA). C12-DEA can be protonated and act as a cationic surfactant. From the pH-dependent sorption to neutral SPME coatings (polyacrylate and PDMS), a pKa of 8.7 was calculated, which differs more than two units from the value of 6.4 reported elsewhere. Polyacrylate coated SPME could not adequately sample largely protonated C12-DEA in humic acid solutions of pH 6. A new hydrophobic SPME coating with cation-exchange properties (C18/SCX) sorbed C12-DEA 100 fold stronger than polyacrylate, because it specifically sorbs protonated C12-DEA species. The C18/SCX-SPME fiber showed linear calibration isotherms in a concentration range of <1 nM-1 μM (well below the CMC). Using the C18/SCX-SPME fibers, linear sorption isotherms to Aldrich humic acid at pH 6 (ionic strength 0.015 M) were measured over a broad concentration range with a sorption coefficient of 10(5.3).

  10. Effect of whey protein concentrate and sodium chloride concentrations on the odour profile of sous vide cooked whole-muscle beef from Argentina.

    Science.gov (United States)

    Grigioni, G; Langman, L; Szerman, N; Irurueta, M; Vaudagna, S R

    2008-07-01

    Semitendinosus muscles added with whey protein concentrate (WPC) and sodium chloride (NaCl) were submitted to sous vide cooking. Four enhancement treatments and a control were tested: 0.875% WPC (w/w)+0.625% NaCl, 2.625% WPC+0.625% NaCl, 0.875% WPC+1.875% NaCl, 2.625% WPC+1.875% NaCl, and control (non-injected muscles). Odour analyses were carried out with an electronic nose (EN) system. EN data were evaluated applying Principal Component Analysis, Linear Discriminant Analysis and Partial Least Squares algorithm. EN was able to discriminate the odour profiles of cooked enhanced beef as a function of the amount of WPC added. No significant differences in odour profiles were observed regarding NaCl concentration. These results agreed with those obtained when odour profiles were analysed in WPC dispersions. The reported results support the applicability of EN methodology for analysing the impact of processing parameters on beef odour profiles.

  11. SURFACTANTS IN LUBRICATION

    Science.gov (United States)

    Surfactants are one of the most widely applied materials by consumers and industry. The application areas for surfactants span from everyday mundane tasks such as cleaning, to highly complex processes involving the formulation of pharmaceuticals, foods, pesticides, lubricants, etc. Even though sur...

  12. Dynamic covalent surfactants

    NARCIS (Netherlands)

    Minkenberg, C.B.

    2012-01-01

    In this thesis the development of surfactant aggregates with fast exchange dynamics between the aggregated and non-aggregated state is described. Dynamic surfactant exchange plays an important role in natural systems, for instance in cell signaling, cell division, and uptake and release of cargo. Re

  13. Determinação potenciométrica da concentração micelar crítica de surfactantes: uma nova aplicação metodológica no ensino de Química Potenciometric determination of the critical micellar concentration of the surfactants: a new methodological application in the Chemical learning

    Directory of Open Access Journals (Sweden)

    Ivanise Mª Rizzatti

    2009-01-01

    Full Text Available The participation of the students in the planning, execution and discussion of experimental results is important for the valuation of the role of them in the construction of the chemical knowledge implicited in the approach between education and research. This work relates either the construction of selective membrane electrodes for surfactants and its application in the potenciometric determination of the critical micellar concentration of the sodium dodecyl sulfate (SDS and dodecyltrimethylammonium bromide (DTAB surfactants. In adition it´s possible to discuss the potenciometric results in matching with the data valued for the tensiometric and condutimetric traditionally used in the physical-chemistry lessons.

  14. Phase diagrams of DNA-photosensitive surfactant complexes: effect of ionic strength and surfactant structure.

    Science.gov (United States)

    Zakrevskyy, Yuriy; Titov, Evgenii; Lomadze, Nino; Santer, Svetlana

    2014-10-28

    Realization of all-optically controlled and efficient DNA compaction is the major motivation in the study of interactions between DNA and photosensitive surfactants. In this article, using recently published approach of phase diagram construction [Y. Zakrevskyy, P. Cywinski, M. Cywinska, J. Paasche, N. Lomadze, O. Reich, H.-G. Löhmannsroben, and S. Santer, J. Chem. Phys. 140, 044907 (2014)], a strategy for substantial reduction of compaction agent concentration and simultaneous maintaining the light-induced decompaction efficiency is proposed. The role of ionic strength (NaCl concentration), as a very important environmental parameter, and surfactant structure (spacer length) on the changes of positions of phase transitions is investigated. Increase of ionic strength leads to increase of the surfactant concentration needed to compact DNA molecule. However, elongation of the spacer results to substantial reduction of this concentration. DNA compaction by surfactants with longer tails starts to take place in diluted solutions at charge ratios Z phase diagrams for different DNA-photosensitive surfactant systems allowed explanation and proposal of a strategy to overcome previously reported limitations of the light-induced decompaction for complexes with increasing surfactant hydrophobicity.

  15. Nanotube Dispersions Made With Charged Surfactant

    Science.gov (United States)

    Kuper, Cynthia; Kuzma, Mike

    2006-01-01

    Dispersions (including monodispersions) of nanotubes in water at relatively high concentrations have been formulated as prototypes of reagents for use in making fibers, films, and membranes based on single-walled carbon nanotubes (SWNTs). Other than water, the ingredients of a dispersion of this type include one or more charged surfactant(s) and carbon nanotubes derived from the HiPco(TradeMark) (or equivalent) process. Among reagents known to be made from HiPco(TradeMark)(or equivalent) SWNTs, these are the most concentrated and are expected to be usable in processing of bulk structures and materials. Test data indicate that small bundles of SWNTs and single SWNTs at concentrations up to 1.1 weight percent have been present in water plus surfactant. This development is expected to contribute to the growth of an industry based on applied carbon nanotechnology. There are expected to be commercial applications in aerospace, avionics, sporting goods, automotive products, biotechnology, and medicine.

  16. Gamma-ray-based measurement of concentration distribution in pipe flow of settling slurry: vertical profiles and tomographic maps

    OpenAIRE

    Krupička, Jan; Matoušek, Václav

    2014-01-01

    Principles of gamma-ray-based measurement are summarized and their application is demonstrated on an operation of the radiometric facility installed in the test loop for slurry flows at the Institute of Hydrodynamics. The facility is able to measure vertical profiles of chord-averaged concentrations and concentration maps in the pipe cross section. A methodology of measurement is proposed including detection and quantification of random and systematic errors. Experimental results are disc...

  17. Pulmonary surfactant adsorption is increased by hyaluronan or polyethylene glycol.

    Science.gov (United States)

    Taeusch, H William; Dybbro, Eric; Lu, Karen W

    2008-04-01

    In acute lung injuries, inactivating agents may interfere with transfer (adsorption) of pulmonary surfactants to the interface between air and the aqueous layer that coats the interior of alveoli. Some ionic and nonionic polymers reduce surfactant inactivation in vitro and in vivo. In this study, we tested directly whether an ionic polymer, hyaluronan, or a nonionic polymer, polyethylene glycol, enhanced adsorption of a surfactant used clinically. We used three different methods of measuring adsorption in vitro: a modified pulsating bubble surfactometer; a King/Clements device; and a spreading trough. In addition we measured the effects of both polymers on surfactant turbidity, using this assay as a nonspecific index of aggregation. We found that both hyaluronan and polyethylene glycol significantly increased the rate and degree of surfactant material adsorbed to the surface in all three assays. Hyaluronan was effective in lower concentrations (20-fold) than polyethylene glycol and, unlike polyethylene glycol, hyaluronan did not increase apparent aggregation of surfactant. Surfactant adsorption in the presence of serum was also enhanced by both polymers regardless of whether hyaluronan or polyethylene glycol was included with serum in the subphase or added to the surfactant applied to the surface. Therefore, endogenous polymers in the alveolar subphase, or exogenous polymers added to surfactant used as therapy, may both be important for reducing inactivation of surfactant that occurs with various lung injuries.

  18. Micellar-enhanced ultrafiltration membrane (MEUF) of Batik wastewater using Cetylpyridinium chloride surfactant

    Science.gov (United States)

    Aryanti, Nita; Pramudono, Bambang; Prawira, Christ Nadya P.; Renardi, Rheza; Fatikhatul K. Ika, S.

    2015-12-01

    In batik production, reactive dyes such as remazol, indigosol, naphtol and rapid are used in the dying process. Batik wastewater contains high level of reactive dyes, wax and sodium salts and is characterized with high Chemical Oxygen Demand (COD), Total Suspended Solids (TSS) as well as high concentration of phenol and Ammonia. Micellar-Enhanced Ultrafiltration Membrane (MEUF) is one of promising technology to separate low molecular weight substances such as dyes. The MEUF process involves combination of ultrafiltration membrane and surfactant at concentration higher than surfactant's Critical Micelle Concentration (CMC). This technique combines high selectivity of reverse osmosis membrane and high flux of ultrafiltration membrane but with lower pressure. Ultrafiltration of batik waste water without surfactant (UF) and with addition of surfactant (MEUF) were studied in order to compare the performance of both systems. The Batik wastewater were obtained from batik industry in Semarang and Surakarta, Central Java, Indonesia. Cetyl Pyridinium Chloride at concentration of 2 and 4 times of its CMC were used. Flatsheet ultrafiltration membrane was made from Polyethersulphone (12% w/w), N-methyl Pyrrolidone (83% w/w) and Polyethylene Glycol (5% w/w). The performance of the UF and MEUF were evaluated based on flux profiles and rejections (COD, TSS, concentration of Ammonia). The results showed that the MEUF had superior performance than the UF. Concentration of COD, TSS, phenol and ammonia were reduced significantly. The rejection of COD were 92.74% and 94.15%. Moreover, the MEUF was capable to reduce the TSS with the rejection of 86.26% and 65%. The concentration of ammonia in permeate were 0.43 ppm and below 0.01 ppm.

  19. Feeding low or pharmacological concentrations of zinc oxide changes the hepatic proteome profiles in weaned piglets.

    Science.gov (United States)

    Bondzio, Angelika; Pieper, Robert; Gabler, Christoph; Weise, Christoph; Schulze, Petra; Zentek, Juergen; Einspanier, Ralf

    2013-01-01

    Pharmacological levels of zinc oxide can promote growth and health of weaning piglets, but the underlying molecular mechanisms are yet not fully understood. The aim of this study was to determine changes in the global hepatic protein expression in response to dietary zinc oxide in weaned piglets. Nine half-sib piglets were allocated to three dietary zinc treatment groups (50, 150, 2500 mg/kg dry matter). After 14 d, pigs were euthanized and liver samples taken. The increase in hepatic zinc concentration following dietary supplementation of zinc was accompanied by up-regulation of metallothionein mRNA and protein expression. Global hepatic protein profiles were obtained by two-dimensional difference gel electrophoresis following matrix-assisted laser desorption ionization/time-of-flight mass spectrometry. A total of 15 proteins were differentially (P<0.05) expressed between groups receiving control (150 mg/kg) or pharmacological levels of zinc (2500 mg/kg) with 7 down- (e.g. arginase1, thiosulfate sulfurtransferase, HSP70) and 8 up-regulated (e.g. apolipoprotein AI, transferrin, C1-tetrahydrofolate synthase) proteins. Additionally, three proteins were differentially expressed with low zinc supply (50 mg/kg Zn) in comparison to the control diet. The identified proteins were mainly associated with functions related to cellular stress, transport, metabolism, and signal transduction. The differential regulation was evaluated at the mRNA level and a subset of three proteins of different functional groups was selected for confirmation by western blotting. The results of this proteomic study suggest that zinc affects important liver functions such as blood protein secretion, protein metabolism, detoxification and redox homeostasis, thus supporting the hypothesis of intermediary effects of pharmacological levels of zinc oxide fed to pigs.

  20. A system for vertical profile measurements of sensible heat and chemical concentrations near the ground surface

    Energy Technology Data Exchange (ETDEWEB)

    Hyppoenen, M.; Walden, J.A.

    1996-12-31

    The design, construction and measurements of a computer controlled system applicable to flux measurements of a scalar quantity by the gradient technique are described. Accuracy requirements for the measured variables which are used for flux calculations are considered, together with some practical aspects concerning data storage and control. The construction includes the hardware and the data acquisition, sample intake, and temperature measurement systems. The measurements comprise laboratory tests of the temperature probes and the hardware as well as field tests over wheat and grass land for temperature and wind speed and ozone (O{sub 3}), carbon dioxide (CO{sub 2}) and nitrous oxide (N{sub 2}O) concentration profiles. The hardware takes care of most of the operation and only the necessary part is done by the software. The data acquisition system is flexible, accepting the input of either digital and/or analog signals. It also controls the whole system, storing all the data in a single data file. The sample intake unit is designed to take continuous samples in to the monitors as well as grab samples into the canisters. Samples can be selected from one to four levels with no dead volumes in the sampling tubes. The temperature measurement system is constructed using a pair of temperature probes, Pt-100, which are connected to the same signal processing card, in order to remove the offset of the electronic components as well as the bias associated with single probes. This ensures the accuracy of the probes down to 0.005 deg C. According to the field measurements, the relative error limits for the sensible heat fluxes varied from 7 to 20 % in an unstable atmospheric situation. For the ozone flux, the error limits varied from 20 to 100 %, indicating a much poorer accuracy of the monitor compared to the temperature probes. (orig.) 16 refs.

  1. Feeding low or pharmacological concentrations of zinc oxide changes the hepatic proteome profiles in weaned piglets.

    Directory of Open Access Journals (Sweden)

    Angelika Bondzio

    Full Text Available Pharmacological levels of zinc oxide can promote growth and health of weaning piglets, but the underlying molecular mechanisms are yet not fully understood. The aim of this study was to determine changes in the global hepatic protein expression in response to dietary zinc oxide in weaned piglets. Nine half-sib piglets were allocated to three dietary zinc treatment groups (50, 150, 2500 mg/kg dry matter. After 14 d, pigs were euthanized and liver samples taken. The increase in hepatic zinc concentration following dietary supplementation of zinc was accompanied by up-regulation of metallothionein mRNA and protein expression. Global hepatic protein profiles were obtained by two-dimensional difference gel electrophoresis following matrix-assisted laser desorption ionization/time-of-flight mass spectrometry. A total of 15 proteins were differentially (P<0.05 expressed between groups receiving control (150 mg/kg or pharmacological levels of zinc (2500 mg/kg with 7 down- (e.g. arginase1, thiosulfate sulfurtransferase, HSP70 and 8 up-regulated (e.g. apolipoprotein AI, transferrin, C1-tetrahydrofolate synthase proteins. Additionally, three proteins were differentially expressed with low zinc supply (50 mg/kg Zn in comparison to the control diet. The identified proteins were mainly associated with functions related to cellular stress, transport, metabolism, and signal transduction. The differential regulation was evaluated at the mRNA level and a subset of three proteins of different functional groups was selected for confirmation by western blotting. The results of this proteomic study suggest that zinc affects important liver functions such as blood protein secretion, protein metabolism, detoxification and redox homeostasis, thus supporting the hypothesis of intermediary effects of pharmacological levels of zinc oxide fed to pigs.

  2. Inactivation of pulmonary surfactant due to serum-inhibited adsorption and reversal by hydrophilic polymers: experimental

    DEFF Research Database (Denmark)

    Taeusch, H William; de la Serna, Jorge Bernardino; Perez-Gil, Jesus

    2005-01-01

    The rate of change of surface pressure, pi, in a Langmuir trough following the deposition of surfactant suspensions on subphases containing serum, with or without polymers, is used to model a likely cause of surfactant inactivation in vivo: inhibition of surfactant adsorption due to competitive...... adsorption of surface active serum proteins. Aqueous suspensions of native porcine surfactant, organic extracts of native surfactant, and the clinical surfactants Curosurf, Infasurf, and Survanta spread on buffered subphases increase the surface pressure, pi, to approximately 40 mN/m within 2 min....... The variation with concentration, temperature, and mode of spreading confirmed Brewster angle microscopy observations that subphase to surface adsorption of surfactant is the dominant form of surfactant transport to the interface. However (with the exception of native porcine surfactant), similar rapid...

  3. Flexible polyelectrolyte conformation in the presence of cationic and anionic surfactants

    Science.gov (United States)

    Passos, C. B.; Kuhn, P. S.; Diehl, A.

    2015-11-01

    In this work we have studied the conformation of flexible polyelectrolyte chains in the presence of cationic and anionic surfactant molecules. We developed a simple theoretical model for the formation of the polyelectrolyte-cationic surfactant complexes and mixed micelles formed by cationic and anionic surfactant molecules, in the framework of the Debye-Hückel-Bjerrum-Manning and Flory theories, with the hydrophobic interaction included explicitly as an effective short-ranged attraction between the surfactant hydrocarbon tails. This simple model allows us to calculate the extension of the polyelectrolyte-cationic surfactant complexes as a function of the anionic surfactant concentration, for different types of cationic and anionic surfactant molecules. A discrete conformational transition from a collapsed state to an elongated coil was found, for all surfactant chain lengths we have considered, in agreement with the experimental observations for the unfolding of ​DNA-cationic surfactant complexes.

  4. Effects of Surfactant Adsorption on Surficial Wettability of Nonwoven Fabrics

    Institute of Scientific and Technical Information of China (English)

    CAI Bing; TANG Bing; LI Rui-xia; WU Da-cheng

    2002-01-01

    All types of surfactants (cationic, anionic and nonionic)reported in this paper could enhance the surficiai wettability of polypropylene (PP) and polyethylene terephthalate (PET) nonwoven fabrics. However, the effects of cationic and nonionic surfactants were better.The longer the treatment time of surfactants on the nonwoven fabrics, the better the surficial wettability.The surficial rewetting time would no longer change above a certain treatment time. The rewettability of nonwoven fabrics could be evidently improved just when the concentration of surfactants was just above the CMC,except for sodium dodecylbenzene sulfonate (LAS). The finer the fibers and the looser the structures, the better the surficial rewettability of nonwoven fabrics.

  5. Interactions between Surfactants in Solution and Electrospun Protein Fibers: Effects on Release Behavior and Fiber Properties

    DEFF Research Database (Denmark)

    Boutrup Stephansen, Karen; García-Díaz, María; Jessen, Flemming

    2016-01-01

    ), a cationic surfactant (benzalkonium chloride), and a neutral surfactant (Triton X-100) were studied. The anionic surfactants increased the insulin release in a concentration-dependent manner, whereas the neutral surfactant had no significant effect on the release. Interestingly, only minute amounts...... of insulin were released from the fibers when benzalkonium chloride was present. The FSP-Ins fibers appeared dense after incubation with this cationic surfactant, whereas high fiber porosity was observed after incubation with anionic or neutral surfactants. Contact angle measurements and staining...

  6. Estimation hydrophilic-lipophilic balance number of surfactants

    Energy Technology Data Exchange (ETDEWEB)

    Pawignya, Harsa, E-mail: harsa-paw@yahoo.co.id [Chemical Engineering Department Diponegoro University (Indonesia); Chemical Engineering Departement University of Pembangunan Nasional Yogyakarta (Indonesia); Prasetyaningrum, Aji, E-mail: ajiprasetyaningrum@gmail.com; Kusworo, Tutuk D.; Pramudono, Bambang, E-mail: Pramudono2004@yahoo.com [Chemical Engineering Department Diponegoro University (Indonesia); Dyartanti, Endah R. [Chemical Engineering Department Diponegoro University (Indonesia); Chemical Enginering Departement Sebelas Maret University (Indonesia)

    2016-02-08

    Any type of surfactant has a hydrophilic-lipophilic balance number (HLB number) of different. There are several methods for determining the HLB number, with ohysical properties of surfactant (solubility cloud point and interfacial tension), CMC methods and by thermodynamics properties (Free energy Gibbs). This paper proposes to determined HLB numbers from interfelation methods. The result of study indicated that the CMC method described by Hair and Moulik espesially for nonionic surfactant. The application of exess Gibbs free energy and by implication activity coefficient provides the ability to predict the behavior of surfactants in multi component mixtures of different concentration. Determination of HLB number by solubility and cloud point parameter is spesific for anionic and nonionic surfactant but this methods not available for cationic surfactants.

  7. Influence of metacide - surfactant complexes on agricultural crops

    Directory of Open Access Journals (Sweden)

    Orynkul Esimova

    2014-12-01

    Full Text Available The complexes based on surfactants and polyhexamethyleneguanidine hydrochloride (metacide are important for agriculture. This paper considers compositions of known bactericidal metacide with different surfactants: anionic surfactant sodium dodecylsulphate (DDSNa and nonionic surfactant Tween 80 (monooleate of oxyethylenated anhydrosorbitols. The effect of individual components and associates of metacide and surfactants on productivity and infection of cereals was studied. According to the study, the highest productivity and infection rate were shown by the associate of metacide and Tween-80. At concentration of Tween-80 in aqueous solution equal to 0.001% in combination with metacide, efficiency was 98% at 0% infection. The surface tension and the wetting of metacide, DDSNa, Tween-80, and associates of metacide with surfactants were studied. In comparison with individual components, metacide-DDSNa and metacide-Tween-80 associates have higher surface activity.

  8. Spinodal Decomposition in Mixtures Containing Surfactants

    Science.gov (United States)

    Melenekvitz, J.

    1998-03-01

    Spinodal decomposition in mixtures containing two immiscible liquids (A and B) plus surfactant was investigated using a recently developed (J. Melenkevitz and S. H. Javadpour, J. Chem. Phys., 107, 623 (1997).) 3-component Ginzburg-Landau model. The time dependent Ginzburg-Landau (TDGL) equations governing the evolution of structure were numerically integrated in 2-dimensions. We found the growth rate of the average domain size, R(t), decreased with increasing surfactant concentration over a wide range of relative amounts of A and B. This can be attributed to the surfactant accumulating at the growing interface between the immiscible liquids, which leads to a reduction in the surface tension. At late times, the growth rate was noticeably altered when thermal fluctuations were added to the numerical simulations. In this case, power law behavior was observed for R(t) at late times, R(t) ~ t^α, with the exponent α decreasing as the amount of surfactant increased. The dynamics at early times were determined by linearizing the TDGL equations about a uniformly mixed state. The growth rate at ealry times was found to be strongly dependent on the model parameters describing the surfactant miscibility in A and B and the surfactant strength. Comparison with recent measurements on SBR / PB mixtures with added PB-SBR diblock copolymer will also be presented.

  9. DILUTE SURFACTANT METHODS FOR CARBONATE FORMATIONS

    Energy Technology Data Exchange (ETDEWEB)

    Kishore K. Mohanty

    2005-01-01

    There are many carbonate reservoirs in US (and the world) with light oil and fracture pressure below its minimum miscibility pressure (or reservoir may be naturally fractured). Many carbonate reservoirs are naturally fractured. Waterflooding is effective in fractured reservoirs, if the formation is water-wet. Many fractured carbonate reservoirs, however, are mixed-wet and recoveries with conventional methods are low (less than 10%). Thermal and miscible tertiary recovery techniques are not effective in these reservoirs. Surfactant flooding (or huff-n-puff) is the only hope, yet it was developed for sandstone reservoirs in the past. The goal of this research is to evaluate dilute (hence relatively inexpensive) surfactant methods for carbonate formations and identify conditions under which they can be effective. Imbibition in an originally oil-wet 2D capillary is the fastest in the case of Alf-38 and slowest in the case of DTAB (among the surfactants studied). Force of adhesion studies and contact angle measurements show that greater wettability alteration is possible with these anionic surfactants than the cationic surfactant studied. The water imbibition rate does not increase monotonically with an increase in the surfactant concentration. A numerical model has been developed that fits the rate of imbibition. Plans for the next quarter include conducting simulation and imbibition studies.

  10. Next Generation Surfactants for Improved Chemical Flooding Technology

    Energy Technology Data Exchange (ETDEWEB)

    Laura Wesson; Prapas Lohateeraparp; Jeffrey Harwell; Bor-Jier Shiau

    2012-05-31

    The principle objective of this project was to characterize and test current and next generation high performance surfactants for improved chemical flooding technology, focused on reservoirs in the Pennsylvanian-aged (Penn) sands. In order to meet this objective the characteristic curvatures (Cc) of twenty-eight anionic surfactants selected for evaluation for use in chemical flooding formulations were determined. The Cc values ranged from -6.90 to 2.55 with the majority having negative values. Crude oil samples from nine Penn sand reservoirs were analyzed for several properties pertinent to surfactant formulation for EOR application. These properties included equivalent alkane carbon numbers, total acid numbers, and viscosity. The brine samples from these same reservoirs were analyzed for several cations and for total dissolved solids. Surfactant formulations were successfully developed for eight reservoirs by the end of the project period. These formulations were comprised of a tertiary mixture of anionic surfactants. The identities of these surfactants are considered proprietary, but suffice to say the surfactants in each mixture were comprised of varying chemical structures. In addition to the successful development of surfactant formulations for EOR, there were also two successful single-well field tests conducted. There are many aspects that must be considered in the development and implementation of effective surfactant formulations. Taking into account these other aspects, there were four additional studies conducted during this project. These studies focused on the effect of the stability of surfactant formulations in the presence of polymers with an associated examination of polymer rheology, the effect of the presence of iron complexes in the brine on surfactant stability, the potential use of sacrificial agents in order to minimize the loss of surfactant to adsorption, and the effect of electrolytes on surfactant adsorption. In these last four studies

  11. Enrichment of surfactant from its aqueous solution using ultrasonic atomization.

    Science.gov (United States)

    Takaya, Haruko; Nii, Susumu; Kawaizumi, Fumio; Takahashi, Katsuroku

    2005-08-01

    Dilute aqueous solutions of dodecyl-benzenesulfonic acid sodium salt (DBS-Na) and polyoxyethylenenonylphenyl ethers (PONPEs) were ultrasonically atomized. The surfactants were concentrated in collected mist droplets. The enrichment ratio increased with decreasing surfactant concentration. Depending on the surfactant's molecular weight and affinity to water, different enrichment ratio was observed in the range of low feed concentrations. For anionic surfactant, DBS-Na, the enrichment ratio was significantly improved by KCl addition and a peak appeared on the plot of the ratio against KCl concentration. Addition of NaCl or CaCl2 . 2H2O to the surfactant solution also enhanced the enrichment ratio; however, the effect was relatively small. Such behaviors of the ratio were interpreted as enhanced interfacial adsorption of the surfactant and a lack of supply of surfactant monomers from liquid bulk because of slow breaking of surfactant micelles. Time required for collecting an amount of mist was also observed. Among the three salt systems, the time for KCl system was twice as long as others. This fact suggested that the formation of smaller droplets in KCl system.

  12. Coupled Transport of PAH and Surfactants in Natural Aquifer Material

    Science.gov (United States)

    Danzer, J.; Grathwohl, P.

    1998-03-01

    Surfactants in aqueous solution adsorb onto mineral surfaces and form micelles above the critical micelle concentration (CMC) due to their physico-chemical properties. Hydrophobic organic compounds such as polycyclic aromatic hydrocarbons (PAHs) have a high affinity for the adsorbed surfactant layers (monomers, hemimicelles and admicelles) and to the micelles in the mobile aqueous phase. The transport of PAHs is controlled by the concentration of the surfactant and the partition coefficients, of the PAHs between water and admicelles (adsolubilization: K adm) and water and micelles (solubilization: K mic), respectively. These partition coefficients were measured in laboratory batch and column experiments using phenanthrene as a chemical probe for the PAHs, a non-ionic surfactant (Terrasurf G50), natural aquifer sand (River Neckar Alluvium: RNA) and its petrographic subcomponents. The sorption of the surfactant can be described by a linear isotherm for concentrations below the CMC and a sorption maximum above the CMC, which both depend on the grain size and the surfactant accessible internal surface area of the particles. K adm was found to be higher than K mic. Both depend on the surfactant's properties, such as alkyl chain length, polar headgroup or ethoxylation. In column experiments an increasing retardation of phenanthrene was observed up to the CMC followed by a facilitated transport at surfactant concentration several times the CMC.

  13. How do esters and dimethyl sulphide concentrations affect fruity aroma perception of red wine? Demonstration by dynamic sensory profile evaluation.

    Science.gov (United States)

    Lytra, Georgia; Tempere, Sophie; Marchand, Stéphanie; de Revel, Gilles; Barbe, Jean-Christophe

    2016-03-01

    Our study focused on variations in wine aroma perception and molecular composition during tasting over a period of 30min. In parallel, dynamic analytical and sensory methods were applied to study changes in the wines' molecular and aromatic evolution. Dynamic sensory profile evaluations clearly confirmed the evolution of the wine's fruity notes during sensory analysis, highlighting significant differences for red-berry and fresh fruit as well as black berry and jammy fruit, after 5 and 15min, respectively. Dynamic analytical methods revealed a decrease in ester and dimethyl sulphide (DMS) concentrations in the first few minutes. Sensory profiles of aromatic reconstitutions demonstrated that the aromatic modulation of fruity notes observed during wine tasting was explained by changes in ester and DMS concentrations. These results revealed that variations in concentrations of DMS and esters during wine tasting had a qualitative impact, by modulating fruity aromas in red wine.

  14. Surfactants in the environment.

    Science.gov (United States)

    Ivanković, Tomislav; Hrenović, Jasna

    2010-03-01

    Surfactants are a diverse group of chemicals that are best known for their wide use in detergents and other cleaning products. After use, residual surfactants are discharged into sewage systems or directly into surface waters, and most of them end up dispersed in different environmental compartments such as soil, water or sediment. The toxic effects of surfactants on various aquatic organisms are well known. In general, surfactants are present in the environment at levels below toxicity and in Croatia below the national limit. Most surfactants are readily biodegradable and their amount is greatly reduced with secondary treatment in wastewater treatment plants. The highest concern is the release of untreated wastewater or wastewater that has undergone primary treatment alone. The discharge of wastewater polluted with massive quantities of surfactants could have serious effects on the ecosystem. Future studies of surfactant toxicities and biodegradation are necessary to withdraw highly toxic and non-biodegradable compounds from commercial use and replace them with more environmentally friendly ones.

  15. Pulmonary surfactant and lung transplantation

    NARCIS (Netherlands)

    Erasmus, Michiel Elardus

    1997-01-01

    Pulmonary surfactant lowers the surface tension at the air-water interface inside the alveolus. This is achieved by adsorption of surfactant phospholipids at the air-water interface, a process controlled by surfactant-associated proteins, such as SP-A. In this way, surfactant prevents collapse of th

  16. Phase behavior and oil recovery investigations using mixed and alkaline-enhanced surfactant systems

    Energy Technology Data Exchange (ETDEWEB)

    Llave, F.M.; Gall, B.L.; French, T.R.; Noll, L.A.; Munden, S.A.

    1992-03-01

    The results of an evaluation of different mixed surfactant and alkaline-enhanced surfactant systems for enhanced oil recovery are described. Several mixed surfactant systems have been studies to evaluate their oil recovery potential as well as improved adaptability to different ranges of salinity, divalent ion concentrations, and temperature. Several combinations of screening methods were used to help identify potential chemical formulations and determine conditions where particular chemical systems can be applied. The effects of different parameters on the behavior of the overall surfactant system were also studied. Several commercially available surfactants were tested as primary components in the mixtures used in the study. These surfactants were formulated with different secondary as well as tertiary components, including ethoxylated and non-ethoxylated sulfonates and sulfates. Improved salinity and hardness tolerance was achieved for some of these chemical systems. The salinity tolerance of these systems were found to be dependent on the molecular weight, surfactant type, and concentration of the surfactant components.

  17. Use of surfactants for the remediation of contaminated soils: a review.

    Science.gov (United States)

    Mao, Xuhui; Jiang, Rui; Xiao, Wei; Yu, Jiaguo

    2015-03-21

    Due to the great harm caused by soil contamination, there is an increasing interest to apply surfactants to the remediation of a variety of contaminated soils worldwide. This review article summarizes the findings of recent literatures regarding remediation of contaminated soils/sites using surfactants as an enhancing agent. For the surfactant-based remedial technologies, the adsorption behaviors of surfactants onto soil, the solubilizing capability of surfactants, and the toxicity and biocompatibility of surfactants are important considerations. Surfactants can enhance desorption of pollutants from soil, and promote bioremediation of organics by increasing bioavailability of pollutants. The removal of heavy metals and radionuclides from soils involves the mechanisms of dissolution, surfactant-associated complexation, and ionic exchange. In addition to the conventional ionic and nonionic surfactants, gemini surfactants and biosurfactants are also applied to soil remediation due to their benign features like lower critical micelle concentration (CMC) values and better biocompatibility. Mixed surfactant systems and combined use of surfactants with other additives are often adopted to improve the overall performance of soil washing solution for decontamination. Worldwide the field studies and full-scale remediation using surfactant-based technologies are yet limited, however, the already known cases reveal the good prospect of applying surfactant-based technologies to soil remediation.

  18. Concentration of surfactant protein D, Clara cell protein CC-16 and IL-10 in bronchoalveolar lavage (BAL in patients with sarcoidosis, hypersensivity pneumonitis and idiopathic pulmonary fibrosis.

    Directory of Open Access Journals (Sweden)

    Wojciech Naumnik

    2009-12-01

    Full Text Available The process of interstitial inflammation, often chronic, goes fluently from alveolitis through granuloma formation to irreversible fibrosis and lung remodeling. Eventually, the loss of functional alveolar units leads to chronic respiratory failure. The pneumoproteins (e.g. SP-D, CC-16 are considered to be markers of interstitial inflammation. We measured BAL concentration of SP-D, CC-16 and IL-10 in patients with sarcoidosis (27, IPF (7 and HP (9. The level of each marker was determined by ELISA specific kit. We found the highest SP-D and CC-16 BAL concentration in patients with the III stage of sarcoidosis (96,67 ng/ml and 31,78 ng/ml, respectively. The lowest SP-D concentration was observed in patients with IPF (76,49 ng/ml, and the lowest CC-16 concentration in patients with HP (21,39 ng/ml. The differences were not statistically significant. In the group of the III stage of sarcoidosis higher SP-D levels were related to higher BAL cytosis and higher percentage of BAL neutrophils, just the opposite as in the IPF and HP group. In the III stage of sarcoidosis and HP, the lower SP-D levels, the lower FEV1 and VC values. The results show, that in acute interstitial inflammation with larger parenchyma engagement (III stage of sarcoidosis the levels of SP-D were higher then in chronic interstitial inflammation (IPF.

  19. Performance improvement of ionic surfactant flooding in carbonate rock samples by use of nanoparticles

    Directory of Open Access Journals (Sweden)

    Mohammad Ali Ahmadi

    2016-07-01

    Full Text Available Abstract Various surfactants have been used in upstream petroleum processes like chemical flooding. Ultimately, the performance of these surfactants depends on their ability to reduce the interfacial tension between oil and water. The surfactant concentration in the aqueous solution decreases owing to the loss of the surfactant on the rock surface in the injection process. The main objective of this paper is to inhibit the surfactant loss by means of adding nanoparticles. Sodium dodecyl sulfate and silica nanoparticles were used as ionic surfactant and nanoparticles in our experiments, respectively. AEROSIL® 816 and AEROSIL® 200 are hydrophobic and hydrophilic nanoparticles. To determine the adsorption loss of the surfactant onto rock samples, a conductivity approach was used. Real carbonate rock samples were used as the solid phase in adsorption experiments. It should be noted that the rock samples were water wet. This paper describes how equilibrium adsorption was investigated by examining adsorption behavior in a system of carbonate sample (solid phase and surfactant solution (aqueous phase. The initial surfactant and nanoparticle concentrations were 500–5000 and 500–2000 ppm, respectively. The rate of surfactant losses was extremely dependent on the concentration of the surfactant in the system, and the adsorption of the surfactant decreased with an increase in the nanoparticle concentration. Also, the hydrophilic nanoparticles are more effective than the hydrophobic nanoparticles.

  20. Effects of a surfactant (FFD-6) on Scenedesmus morphology and growth under different nutrient conditions

    NARCIS (Netherlands)

    Lürling, M.F.L.L.W.

    2006-01-01

    Surfactants are man-made compounds that are meanwhile omnipresent in the environment, but environmental concentrations of surfactants are such that they are thought to have little risk for aquatic systems. The major anionic surfactants currently on the global market are linear alkylbenzene sulfonate

  1. Effects of a surfactant (FFD-6) on Scenedesmus morphology and growth under different nutrient conditions

    NARCIS (Netherlands)

    Lürling, M.F.L.L.W.

    2006-01-01

    Surfactants are man-made compounds that are meanwhile omnipresent in the environment, but environmental concentrations of surfactants are such that they are thought to have little risk for aquatic systems. The major anionic surfactants currently on the global market are linear alkylbenzene

  2. Phase behavior of supercritical CO2 microemulsion with food-grade surfactant AOT

    Institute of Scientific and Technical Information of China (English)

    ZHOU Yongsheng; AN Xueqin; SHEN Weiguo; ZHANG Yinghua

    2006-01-01

    Phase behavior of scCO2 microemulsion formed with food grade surfactant sodium bis-(2-ethylhexyl) sulfosuccinate (AOT) was studied. Critical microemulsion concentration (cμc) was deduced from the dependence of pressure of cloud points on the concentration of surfactant AOT at constant temperature and water concentration. The results show that there are transition points on the cloud point curve in a very narrow range of concentration of surfactant AOT. The transition points were changed with the temperature and water concentration. These phenomena show that lower temperature is suitable to forming microemulsion droplet and the microemulsion with high water concentration is likely to absorb more surfactants to structure the interface.

  3. Metathesis depolymerizable surfactants

    Science.gov (United States)

    Jamison, Gregory M.; Wheeler, David R.; Loy, Douglas A.; Simmons, Blake A.; Long, Timothy M.; McElhanon, James R.; Rahimian, Kamyar; Staiger, Chad L.

    2008-04-15

    A class of surfactant molecules whose structure includes regularly spaced unsaturation in the tail group and thus, can be readily decomposed by ring-closing metathesis, and particularly by the action of a transition metal catalyst, to form small molecule products. These small molecules are designed to have increased volatility and/or enhanced solubility as compared to the original surfactant molecule and are thus easily removed by solvent extraction or vacuum extraction at low temperature. By producing easily removable decomposition products, the surfactant molecules become particularly desirable as template structures for preparing meso- and microstructural materials with tailored properties.

  4. A simple method of obtaining concentration depth-profiles from X-ray diffraction

    Science.gov (United States)

    Wiedemann, K. E.; Unnam, J.

    1984-01-01

    The construction of composition profiles from X-ray intensity bands was investigated. The intensity band-to-composition profile transformation utilizes a solution which can be easily evaluated. The technique can be applied to thin films and thick speciments for which the variation of lattice parameters, linear absorption coefficient, and reflectivity with composition are known. A deconvolution scheme with corrections for the instrumental broadening and ak-alfadoublet is discussed.

  5. Surfactant recovery from water using foam fractionation: Effect of temperature and added salt

    Energy Technology Data Exchange (ETDEWEB)

    Kumpabooth, K.; Osuwan, S. [Chulalongkorn Univ., Bangkok (Thailand). Petroleum and Petrochemical Coll.; Scamehorn, J.F.; Harwell, J.H. [Univ. of Oklahoma, Norman, OK (United States). Inst. for Applied Surfactant Research

    1999-01-01

    The purpose of this study was to investigate the use of foam fractionation to recover surfactant present at low concentrations in aqueous streams. A simple continuous mode foam fractionation was used, and three surfactants were chosen for this study: sodium dodecyl sulfate, cetylpyridinium chloride, and sodium n-hexadecyl diphenyloxide disulfonate. In a previous study the effects of surfactant concentration, air flow rate, liquid- and vapor-phase heights, and sparger type were investigated for these surfactants. Here, the effects of temperature and added salt are studied. It is found that the foam flow rate and enrichment ratio increase whereas the foam wetness and the rate of surfactant recovery decrease with increasing temperature. Increasing the concentration of added salt decreases the CMC of the surfactants. The foam flow rate, foam wetness, and the rate of surfactant recovery increase, while the enrichment ratio decreases with increasing concentration of salt.

  6. Formation of surfactant-laden drops: comparison of experimental and numerical results

    Science.gov (United States)

    Kovalchuk, Nina; Kahouadji, Lyes; Simmons, Mark; Craster, Richard; Matar, Omar; Juric, Damir; Chergui, Jalel; Shin, Seungwon

    2016-11-01

    Drop formation is ubiquitous in many industrial processes, with surfactants being commonly used to stabilise drops. Thus, understanding the regularities of drop formation and accompanying processes, such as formation of satellite droplets in the presence of surfactant is of high importance. Here we present the results of a comparative experimental and numerical study on formation of surfactant-laden drops over a range of flow rates and surfactant concentrations. The precise parameters of the surface tension isotherm for surfactants used in the experimental study are implemented in the numerical code enabling quantitative comparison between the two approaches. It is shown that the effect of surfactant depends not only on concentration, but also on the value of critical micellar concentration (cmc). The transition to the regime where satellite droplets are no longer released was observed when the flow rate exceeded a threshold value depending on surfactant concentration and cmc value. EPSRC UK Programme Grant MEMPHIS (EP/K003976/1).

  7. Lipid Bilayers in the Gel Phase Become Saturated by Triton X-100 at Lower Surfactant Concentrations Than Those in the Fluid Phase

    Science.gov (United States)

    Ahyayauch, Hasna; Collado, M. Isabel; Alonso, Alicia; Goñi, Felix M.

    2012-01-01

    It has been repeatedly observed that lipid bilayers in the gel phase are solubilized by lower concentrations of Triton X-100, at least within certain temperature ranges, or other nonionic detergents than bilayers in the fluid phase. In a previous study, we showed that detergent partition coefficients into the lipid bilayer were the same for the gel and the fluid phases. In this contribution, turbidity, calorimetry, and 31P-NMR concur in showing that bilayers in the gel state (at least down to 13–20°C below the gel-fluid transition temperature) become saturated with detergent at lower detergent concentrations than those in the fluid state, irrespective of temperature. The different saturation may explain the observed differences in solubilization. PMID:22713566

  8. NUMERICAL SIMULATION AND FIELD IMPLEMENTATION OF SURFACTANT FLOODING

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Based on the features of surfactant flooding, a mathematical model for surfactant flooding is established. The adsorption-retention, convection diffusion of surfactant and influence of concentration change upon relative permeability curve are included in the model. The novel description of adsorption quantity of surfactant and relative permeability curve are presented, which enhance the coincidence between mathematical model and field practice, the relative errors of main development indexes are within 6%. The model is applied to the numerical research of the surfactant flooding in the untabulated beds of Xing1-3 surfactant flooding pilot site of No.4 Oil Production Company of Daqing Oilfield, the influences of surfactant concentration, injection quantity, slug combination mode upon the development effect and economic benefit are quantitatively analyzed, the injection scheme is optimized as follows: surfactant concentration is 0.5%, slug volume is 0.02 PV, slug combination mode is 2 slugs. After the implementation of scheme in oilfield, the cumulative increase of oil is 2186.0 t, up to nearly 30%.

  9. Theory of interfacial phase transitions in surfactant systems

    Science.gov (United States)

    Shukla, K. P.; Payandeh, B.; Robert, M.

    1991-06-01

    The spin-1 Ising model, which is equivalent to the three-component lattice gas model, is used to study wetting transitions in three-component surfactant systems consisting of an oil, water, and a nonionic surfactant. Phase equilibria, interfacial profiles, and interfacial tensions for three-phase equilibrium are determined in mean field approximation, for a wide range of temperature and interaction parameters. Surfactant interaction parameters are found to strongly influence interfacial tensions, reducing them in some cases to ultralow values. Interfacial tensions are used to determine whether the middle phase, rich in surfactant, wets or does not wet the interface between the oil-rich and water-rich phases. By varying temperature and interaction parameters, a wetting transition is located and found to be of the first order. Comparison is made with recent experimental results on wetting transitions in ternary surfactant systems.

  10. Phosphine oxide surfactants revisited.

    Science.gov (United States)

    Stubenrauch, Cosima; Preisig, Natalie; Laughlin, Robert G

    2016-04-01

    This review summarizes everything we currently know about the nonionic surfactants alkyl dimethyl (C(n)DMPO) and alkyl diethyl (C(n)DEPO) phosphine oxide (PO surfactants). The review starts with the synthesis and the general properties (Section 2) of these compounds and continues with their interfacial properties (Section 3) such as surface tension, surface rheology, interfacial tension and adsorption at solid surfaces. We discuss studies on thin liquid films and foams stabilized by PO surfactants (Section 4) as well as studies on their self-assembly into lyotropic liquid crystals and microemulsions, respectively (Section 5). We aim at encouraging colleagues from both academia and industry to take on board PO surfactants whenever possible and feasible because of their broad variety of excellent properties.

  11. Use of surfactants for the remediation of contaminated soils: A review

    Energy Technology Data Exchange (ETDEWEB)

    Mao, Xuhui, E-mail: clab@whu.edu.cn [School of Resource and Environmental Science, Wuhan University, Wuhan 430072 (China); Jiang, Rui; Xiao, Wei [School of Resource and Environmental Science, Wuhan University, Wuhan 430072 (China); Yu, Jiaguo, E-mail: jiaguoyu@yahoo.com [State Key Laboratory of Advanced Technology for Material Synthesis and Processing, Wuhan University of Technology, Wuhan 430070 (China)

    2015-03-21

    Highlights: • The recent advances in use of surfactant for soil remediation are reviewed. • The mechanisms of surfactant-based soil remediation are discussed. • A review on the application of different types of surfactants is made. • The future research direction of surfactant-based technologies is suggested. - Abstract: Due to the great harm caused by soil contamination, there is an increasing interest to apply surfactants to the remediation of a variety of contaminated soils worldwide. This review article summarizes the findings of recent literatures regarding remediation of contaminated soils/sites using surfactants as an enhancing agent. For the surfactant-based remedial technologies, the adsorption behaviors of surfactants onto soil, the solubilizing capability of surfactants, and the toxicity and biocompatibility of surfactants are important considerations. Surfactants can enhance desorption of pollutants from soil, and promote bioremediation of organics by increasing bioavailability of pollutants. The removal of heavy metals and radionuclides from soils involves the mechanisms of dissolution, surfactant-associated complexation, and ionic exchange. In addition to the conventional ionic and nonionic surfactants, gemini surfactants and biosurfactants are also applied to soil remediation due to their benign features like lower critical micelle concentration (CMC) values and better biocompatibility. Mixed surfactant systems and combined use of surfactants with other additives are often adopted to improve the overall performance of soil washing solution for decontamination. Worldwide the field studies and full-scale remediation using surfactant-based technologies are yet limited, however, the already known cases reveal the good prospect of applying surfactant-based technologies to soil remediation.

  12. New theoretical framework for designing nonionic surfactant mixtures that exhibit a desired adsorption kinetics behavior.

    Science.gov (United States)

    Moorkanikkara, Srinivas Nageswaran; Blankschtein, Daniel

    2010-12-21

    How does one design a surfactant mixture using a set of available surfactants such that it exhibits a desired adsorption kinetics behavior? The traditional approach used to address this design problem involves conducting trial-and-error experiments with specific surfactant mixtures. This approach is typically time-consuming and resource-intensive and becomes increasingly challenging when the number of surfactants that can be mixed increases. In this article, we propose a new theoretical framework to identify a surfactant mixture that most closely meets a desired adsorption kinetics behavior. Specifically, the new theoretical framework involves (a) formulating the surfactant mixture design problem as an optimization problem using an adsorption kinetics model and (b) solving the optimization problem using a commercial optimization package. The proposed framework aims to identify the surfactant mixture that most closely satisfies the desired adsorption kinetics behavior subject to the predictive capabilities of the chosen adsorption kinetics model. Experiments can then be conducted at the identified surfactant mixture condition to validate the predictions. We demonstrate the reliability and effectiveness of the proposed theoretical framework through a realistic case study by identifying a nonionic surfactant mixture consisting of up to four alkyl poly(ethylene oxide) surfactants (C(10)E(4), C(12)E(5), C(12)E(6), and C(10)E(8)) such that it most closely exhibits a desired dynamic surface tension (DST) profile. Specifically, we use the Mulqueen-Stebe-Blankschtein (MSB) adsorption kinetics model (Mulqueen, M.; Stebe, K. J.; Blankschtein, D. Langmuir 2001, 17, 5196-5207) to formulate the optimization problem as well as the SNOPT commercial optimization solver to identify a surfactant mixture consisting of these four surfactants that most closely exhibits the desired DST profile. Finally, we compare the experimental DST profile measured at the surfactant mixture condition

  13. Estimation of particle concentration profiles in a three-phase fluidized bed from experimental data and using the wake model

    Directory of Open Access Journals (Sweden)

    Knesebeck A.

    2004-01-01

    Full Text Available Particles with a size distribution in the range of 34 to 468 µm were fluidized in a three-phase bed using low liquid and gas velocities. Particle size distribution and pressure profile measurements were carried out at different locations in the bed in order to study the influence of fluid velocities on segregation and dispersion of particles in different size classes. The influence of gas velocity on particle mixing was analyzed in terms of internal solid fluxes, calculated by means of the wake model. Based on the experimental results, different particle distribution patterns were identified. Although no significant tendencies were observed for radial profiles, particles of different sizes have significantly different axial profiles, which are mainly affected by the velocity of the liquid phase. Thus, depending on the liquid velocity, smaller particles reach a maximum concentration at different bed heights.

  14. Modeling transport effects of perfluorinated and hydrocarbon surfactants in groundwater by using micellar liquid chromatography

    Energy Technology Data Exchange (ETDEWEB)

    Simmons, Rashad N. [Department of Chemistry and Center for Integrative Toxicology, Michigan State University, East Lansing, MI 48824-1322 (United States); McGuffin, Victoria L. [Department of Chemistry and Center for Integrative Toxicology, Michigan State University, East Lansing, MI 48824-1322 (United States)], E-mail: jgshabus@aol.com

    2007-11-05

    The effects of hydrocarbon and perfluorinated surfactants, above their critical micelle concentration (CMC), on the transport of neutral environmental pollutants are compared. Reversed-phase micellar liquid chromatography is used to model the groundwater system. The octadecylsilica stationary phase serves to simulate soil particles containing organic matter, whereas the aqueous surfactant mobile phases serve to simulate groundwater containing a surfactant at varying concentrations. Sodium dodecyl sulfate and lithium perfluorooctane sulfonate are used as representatives of the hydrocarbon and perfluorinated surfactants, respectively. Benzene, mono- and perhalogenated benzenes, and polycyclic aromatic hydrocarbons are used as models for environmental pollutants. Transport effects were elucidated from the retention factor, k, and the equilibrium constant per micelle, K{sub eq}, of the model pollutants in the individual surfactants. Based on k values, the transport of the model pollutants increased in both surfactant solutions in comparison to pure water. As the concentration of the surfactants increased, the transport of the pollutants increased as well. Notably, the K{sub eq} values of the pollutants in the perfluorinated surfactant were at least an order of magnitude less than those in the hydrocarbon surfactant. Overall, these results suggest that the presence of a perfluorinated surfactant, above its CMC, increases the transport of pollutants in a groundwater system. However, the perfluorinated surfactant exhibits a lesser transport effect than the hydrocarbon surfactant.

  15. A method of rapidly obtaining concentration-depth profiles from X-ray diffraction

    Science.gov (United States)

    Wiedemann, K. E.; Unnam, J.

    1985-01-01

    A broadened diffraction peak, or intensity band, is observed in the case diffraction from a nonhomogeneous phase in which the variations in compositions result in a range of lattice spacings. An intriguing aspect regarding the relationship between the X-ray diffraction band and the composition-depth profile is the hypersensitivity of the intensity band to the shape of the profile. A number of investigators have sought to use this sensitivity to construct high-precision profiles. Difficulties encountered are related to complications due to intensity broadening, and prohibitive computational requirements. Simulation techniques have provided the most accurate interpretation of the intensity band. However, the involved calculations have been prohibitively long. The present study discusses a technique which has simple computational requirements and is as accurate and flexible as the simulation techniques.

  16. Rheology of cellulose nanofibrils in the presence of surfactants.

    Science.gov (United States)

    Quennouz, Nawal; Hashmi, Sara M; Choi, Hong Sung; Kim, Jin Woong; Osuji, Chinedum O

    2016-01-07

    Cellulose nanofibrils (CNFs) present unique opportunities for rheology modification in complex fluids. Here we systematically consider the effect of ionic and non-ionic surfactants on the rheology of dilute CNF suspensions. Neat suspensions are transparent yield-stress fluids which display strong shear thinning and power-law dependence of modulus on concentration, G' ∼ c(2.1). Surfactant addition below a critical mass concentration cc produces an increase in the gel modulus with retention of optical clarity. Larger than critical concentrations induce significant fibril aggregation leading to the loss of suspension stability and optical clarity, and to aggregate sedimentation. The critical concentration was the lowest for a cationic surfactant (DTAB), cc ≈ 0.08%, while suspension stability was retained for non-ionic surfactants (Pluronic F68, TX100) at concentrations up to 8%. The anionic surfactant SDS led to a loss of stability at cc ≈ 1.6% whereas suspension stability was not compromised by anionic SLES up to 8%. Dynamic light scattering data are consistent with a scenario in which gel formation is driven by micelle-nanofibril bridging mediated by associative interactions of ethoxylated surfactant headgroups with the cellulose fibrils. This may explain the strong difference between the properties of SDS and SLES-modified suspensions. These results have implications for the use of CNFs as a rheology modifier in surfactant-containing systems.

  17. Characterization and control of surfactant-mediated Norovirus interactions.

    Science.gov (United States)

    Mertens, Brittany S; Velev, Orlin D

    2015-11-28

    Understanding of the colloidal interactions of Norovirus particles in aqueous medium could provide insights on the origins of the notorious stability and infectivity of these widespread viral agents. We characterized the effects of solution pH and surfactant type and concentration on the aggregation, dispersion, and disassembly of Norovirus virus-like particles (VLPs) using dynamic light scattering, electrophoretic light scattering, and transmission electron microscopy. Owing to net negative surface charge of the VLPs at neutral pH, low concentrations of cationic surfactant tend to aggregate the VLPs, whereas low concentrations of anionic surfactant tend to disperse the particles. Increasing the concentration of these surfactants beyond their critical micelle concentration leads to virus capsid disassembly and breakdown of aggregates. Non-ionic surfactants, however, had little effect on virus interactions and likely stabilized them additionally in suspension. The data were interpreted on the basis of simple models for surfactant binding and re-charging of the virus capsid. We used zeta potential data to characterize virus surface charge and interpret the mechanisms behind these demonstrated surfactant-virus interactions. The fundamental understanding and control of these interactions will aid in practical formulations for virus inactivation and removal from contaminated surfaces.

  18. A rocket radiobeacon experiment on the electron concentration profile measurements in the bottomside of the ionosphere

    Science.gov (United States)

    Sinelnikov, V. M.; Lvova, G. P.; Guliaeva, T. L.; Pakhomov, S. V.; Glotov, A. P.

    The possibility of measuring the electron density profile in the height interval 70-110 km with a two-frequency coherent transmitter set mounted on a 'small' geophysical rocket of type M-100 is investigated. Results are presented of measurements using the phase Doppler method carried out at middle latitudes in May 1979 and February 1980. Good consistency of the profiles measured for the D and E regions of the ionosphere with those of IRI is not always obtained, even when the correct helio and geophysic conditions of the experiments are given for calculations with IRI.

  19. Simulation of the effective concentration profiles in InGaAs/GaAs heterostructures containing δ-doped layers

    Energy Technology Data Exchange (ETDEWEB)

    Khazanova, S. V., E-mail: khazanova@phys.unn.ru; Degtyarev, V. E.; Tikhov, S. V. [Nizhni Novgorod State University (Russian Federation); Baidus, N. V. [Nizhni Novgorod State University, Physical Technical Research Institute (Russian Federation)

    2015-01-15

    InGaAs/GaAs heterostructures containing quantum wells and δ-doped layers are studied theoretically and experimentally. On the basis of the procedure of self-consistently solving the Schrödinger equation and Poisson equation, the differential capacitance and the apparent electron concentration profiles are numerically calculated for structures with different mutual arrangements of the quantum well and the δ layer. The results of the calculations are compared with the result of analyzing the experimental capacitance-voltage characteristics of the structures. The systematic features of the behavior of the apparent concentration profiles and capacitance-voltage characteristics in relation to the geometric properties of the structure, the temperature, and the doping level are established.

  20. Perfluorinated Alcohols Induce Complex Coacervation in Mixed Surfactants.

    Science.gov (United States)

    Jenkins, Samuel I; Collins, Christopher M; Khaledi, Morteza G

    2016-03-15

    Recently, we reported a unique and nearly ubiquitous phenomenon of inducing simple and complex coacervation in solutions of a broad variety of individual and mixed amphiphiles and over a wide range of concentrations and mole fractions. This paper describes a novel type of biphasic separation in aqueous solutions of mixed cationic-anionic (catanionic) surfactants induced by hexafluoroisopropanol (HFIP). The test cases included mixtures of cetyltrimethylammonium bromide (CTAB) and sodium dodecyl sulfate (SDS) (surfactants with different carbon chain lengths) as well as dodecyltrimethylammonium bromide (DTAB) with SDS (surfactants with the same carbon chain lengths). The CTAB-SDS-HFIP coacervate systems can be produced at many different mole ratios of surfactant, but DTAB-SDS-HFIP formed only coacervates at equimolar (1:1) mole ratios of DTAB and SDS. The phase-transition behavior of both systems was studied over a wide range of surfactant and HFIP concentrations at the stoichiometric (1:1) mole ratio of cationic/anionic surfactants. The chemical compositions of each of the two phases (aqueous-rich and coacervate phases) were studied with regard to the concentrations of HFIP, water, and individual surfactants. It is revealed that the surfactant-rich phase (coacervate phase) contains a large percentage of fluoroalcohol relative to the aqueous phase and is enriched in both surfactants but contains a small percentage of water. Surprisingly, the concentration of water in the coacervate phase increases as the total HFIP concentration is increased while the concentration of HFIP in the coacervate phase remains relatively constant, which means a larger amount of water associated with HFIP molecules is extracted into the coacervate phase, which results in the growth of the phase. The volume of the coacervate phase increases with an increase in surfactant concentration and total HFIP %. The coacervate phase is highly enriched in the two amphiphilic ions (DTA(+) and DS

  1. In situ measurement of PCB pore water concentration profiles in activated carbon-amended sediment using passive samplers.

    Science.gov (United States)

    Oen, Amy M P; Janssen, Elisabeth M L; Cornelissen, Gerard; Breedveld, Gijs D; Eek, Espen; Luthy, Richard G

    2011-05-01

    Vertical pore water profiles of in situ PCBs were determined in a contaminated mudflat in San Francisco Bay, CA, 30 months after treatment using an activated carbon amendment in the upper layer of the sediment. Pore water concentrations were derived from concentrations of PCBs measured in two passive samplers; polyethylene (PE, 51 μm thick) and polyoxymethylene (POM, 17 μm thick) at different sediment depths. To calculate pore water concentrations from PCB contents in the passive samplers, an equilibrium approach and a first-order uptake model were applied, using five performance reference compounds to estimate pore water sampling rates. Vertical pore water profiles showed good agreement among the measurement and calculation methods with variations within a factor of 2, which seems reasonable for in situ measurements. The close agreements of pore water estimates for the two sampler materials (PE and POM) and the two methods used to translate uptake in samplers to pore water concentrations demonstrate the robustness and suitability of the passive sampling approach. The application of passive samplers in the sediment presents a promising method for site monitoring and remedial treatment evaluation of sorbent amendment or capping techniques that result in changes of pore water concentrations in the sediment subsurface.

  2. Effects of alkyl polyglycoside, a nonionic surfactant, and forage-to-concentrate ratio on rumen fermentation, amino acid composition of rumen content, bacteria and plasma in goats.

    Science.gov (United States)

    Zeng, Bo; Tan, Zhiliang; Tang, Shaoxun; Han, Xuefeng; Tan, Chuanyan; Zhong, Rongzhen; Hea, Zhixiong; Arigbede, Oluwasanmi Moses

    2011-06-01

    In the present study, the effects of different forage-to-concentrate ratios (F:C) and an alkyl polyglycoside (APG) supplementation on parameters of rumen and blood metabolism were investigated in goats. A 2 x 2 factorial experiment was arranged within a 4 x 4 Latin square design (four 22-day periods), using four wether goats equipped with permanent ruminal cannulas. The experimental diets included two F:C levels (40:60 vs. 60:40), and two APG supplementation levels (None or 13 ml APG daily per animal). Rumen contents and blood samples were collected at the end of each period. Dietary F:C alteration affected plasma urea and influenced the proportions of leucine, histidine, arginine, glycine, proline, alanine, valine, phenylalanine, cysteine and tyrosine in rumen content, and the proportions of methionine, threonine and proline in solid-associated bacteria (SAB) significantly. Dietary APG decreased the proportions of valine and phenylalanine in rumen content, and the histidine content of liquid-associated bacteria. The interaction between dietary F:C and APG was significant for the proportions of glycine and alanine in rumen content, and the proportions of lysine and threonine in SAB. The proportion of lysine was greater, but the proportion of threonine was less in SAB for goats fed high F:C diet without APG supplementation. The proportions of plasma free amino acids and glucose concentration were not affected by experimental treatments. These results indicated that dietary APG addition affected the amino acid composition of the rumen content and ruminal bacteria, but this depended on the dietary F:C ratio. It is necessary to validate the effectiveness of dietary APG supplementation in further studies with more animals.

  3. Hydrogels of sodium alginate in cationic surfactants: Surfactant dependent modulation of encapsulation/release toward Ibuprofen.

    Science.gov (United States)

    Jabeen, Suraya; Chat, Oyais Ahmad; Maswal, Masrat; Ashraf, Uzma; Rather, Ghulam Mohammad; Dar, Aijaz Ahmad

    2015-11-20

    The interaction of cetyltrimethylammoium bromide (CTAB) and its gemini homologue (butanediyl-1,4-bis (dimethylcetylammonium bromide), 16-4-16 with biocompatible polymer sodium alginate (SA) has been investigated in aqueous medium. Addition of K2CO3 influences viscoelastic properties of surfactant impregnated SA via competition between electrostatic and hydrophobic interactions. Viscosity of these polymer-surfactant systems increases with increase in concentration of K2CO3, and a cryogel is formed at about 0.5M K2CO3 concentration. The thermal stability of gel (5% SA+0.5M K2CO3) decreases with increase in surfactant concentration, a minimum is observed with increase in 16-4-16 concentration. The impact of surfactant addition on the alginate structure vis-à-vis its drug loading capability and release thereof was studied using Ibuprofen (IBU) as the model drug. The hydrogel with 16-4-16 exhibits higher IBU encapsulation and faster release in comparison to the one containing CTAB. This higher encapsulation-cum-faster release capability has been related to micelle mediated solubilization and greater porosity of the hydrogel with gemini surfactant.

  4. Polybrominated diphenyl ethers (PBDEs) in soils along a rural-urban-rural transect: Sources, concentration gradients, and profiles

    Energy Technology Data Exchange (ETDEWEB)

    Gevao, Bondi, E-mail: bgevao@kisr.edu.kw [Department of Environmental Science, Kuwait Institute for Scientific Research, P.O. Box 24885, Safat 13109 (Kuwait); Ghadban, Abdul Nabi; Uddin, Saif [Department of Environmental Science, Kuwait Institute for Scientific Research, P.O. Box 24885, Safat 13109 (Kuwait); Jaward, Foday M. [Environmental and Occupational Health, College of Public Health, University of South Florida, 13201 Bruce B. Downs Blvd. MDC56, Tampa, FL 33612-3805 (United States); Bahloul, Majed; Zafar, Jamal [Department of Environmental Science, Kuwait Institute for Scientific Research, P.O. Box 24885, Safat 13109 (Kuwait)

    2011-12-15

    This study reports concentrations of PBDEs in surface soil samples collected along a 140 km transect across Kuwait to assess the role of urban centers as sources of persistent organic pollutants to the surrounding environment. The {Sigma}PBDE concentrations varied by a factor of {approx}250 and ranged from 289 to 80,078 pg g{sup -1} d.w. The concentrations of PBDEs in Kuwait City were significantly higher (p < 0.01) than those collected from sites outside the city supporting the hypothesis that urban centers are sources of PBDEs. The congener profiles were dominated by BDE-209, accounting for 93% of the PBDEs in the soil samples. The concentrations of all congeners (except BDE-209) were highly correlated with percent organic carbon (%OC) (p > 0.05) when the data from Kuwait City was omitted from the analysis. These findings suggest that soil concentrations outside the urban centers were close to equilibrium with the atmosphere. - Highlights: > {Sigma}PBDE soil concentrations higher in City compared to samples from remote locations. > {Sigma}PBDE soil concentrations significantly correlated with %OC in remote samples. > Study lends support to hypothesis that urban centers are sources of PBDEs. - PBDE concentrations in soil samples collected along a rural-urban-rural transect provide evidence that urban centers are sources to the surrounding environment.

  5. Control of Sewer systems and Wastewater treatment plants using pollutant concentration profiles

    DEFF Research Database (Denmark)

    Bechmann, Henrik; Nielsen, Marinus K.; Madsen, Henrik

    1998-01-01

    On-line measurements of pollutants in the wastewater combined with grey-box modelling are used to estimate the amount of deposits in the sewer system. The pollutant mass flow at the wastewater treatment plant is found to consist of a diurnal profile minus the deposited amount of pollutants...

  6. Thermodynamics of non-ionic surfactant Triton X-100-cationic surfactants mixtures at the cloud point

    Energy Technology Data Exchange (ETDEWEB)

    Batigoec, Cigdem [Department of Chemistry, Faculty of Sciences, Trakya University, 22030 Edirne (Turkey); Akbas, Halide, E-mail: hakbas34@yahoo.com [Department of Chemistry, Faculty of Sciences, Trakya University, 22030 Edirne (Turkey); Boz, Mesut [Department of Chemistry, Faculty of Sciences, Trakya University, 22030 Edirne (Turkey)

    2011-12-15

    Highlights: > Non-ionic surfactants are used as emulsifier and solubilizate in such as textile, detergent and cosmetic. > Non-ionic surfactants occur phase separation at temperature as named the cloud point in solution. > Dimeric surfactants have attracted increasing attention due to their superior surface activity. > The positive values of {Delta}G{sub cp}{sup 0} indicate that the process proceeds nonspontaneous. - Abstract: This study investigates the effects of gemini and conventional cationic surfactants on the cloud point (CP) of the non-ionic surfactant Triton X-100 (TX-100) in aqueous solutions. Instead of visual observation, a spectrophotometer was used for measurement of the cloud point temperatures. The thermodynamic parameters of these mixtures were calculated at different cationic surfactant concentrations. The gemini surfactants of the alkanediyl-{alpha}-{omega}-bis (alkyldimethylammonium) dibromide type, on the one hand, with different alkyl groups containing m carbon atoms and an ethanediyl spacer, referred to as 'm-2-m' (m = 10, 12, and 16) and, on the other hand, with -C{sub 16} alkyl groups and different spacers containing s carbon atoms, referred to as '16-s-16' (s = 6 and 10) were synthesized, purified and characterized. Additions of the cationic surfactants to the TX-100 solution increased the cloud point temperature of the TX-100 solution. It was accepted that the solubility of non-ionic surfactant containing polyoxyethylene (POE) hydrophilic chain was a maximum at the cloud point so that the thermodynamic parameters were calculated at this temperature. The results showed that the standard Gibbs free energy ({Delta}G{sub cp}{sup 0}), the enthalpy ({Delta}H{sub cp}{sup 0}) and the entropy ({Delta}S{sub cp}{sup 0}) of the clouding phenomenon were found positive in all cases. The standard free energy ({Delta}G{sub cp}{sup 0}) increased with increasing hydrophobic alkyl chain for both gemini and conventional cationic

  7. Effect of Gemini-type surfactant on methane hydrate formation

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, K.E.; Park, J.M.; Kim, C.U.; Chae, H.J.; Jeong, S.Y. [Korea Research Inst. of Chemical Technology, Jang-Dong, Yuseong-Gu, Daejeon (Korea, Republic of)

    2008-07-01

    Natural gas hydrates are formed from water and natural gas molecules at particular temperatures and pressures that become ice-like inclusion compounds. Gas hydrates offer several benefits such as energy resource potential and high storage capacity of natural gas in the form of hydrates. However, the application of natural gas hydrates has been deterred by its low formation rate and low conversion ratio of water into hydrate resulting in low actual storage capacity. This paper presented an experimental study to determine the effect of adding a novel Gemini-type surfactant on methane hydrate formation. The experimental study was described with reference to the properties of prepared diols and properties of prepared disulfonates. Gemini surfactant is the family of surfactant molecules possessing more than one hydrophobic tail and hydrophilic head group. They generally have better surface-active properties than conventional surfactants of equal chain length. The paper presented the results of the study in terms of the reactions of diols with propane sultone; storage capacity of hydrate formed with and without surfactant; and methane hydrate formation with and without disulfonate. It was concluded that the methane hydrate formation was accelerated by the addition of novel anionic Gemini-type surfactants and that hydrate formation was influenced by the surfactant concentration and alkyl chain length. For a given concentration, the surfactant with the highest chain length demonstrated the highest formation rate and storage capacity. 5 refs., 3 tabs., 4 figs.

  8. Removal of 226Ra and 228Ra from TENORM sludge waste using surfactants solutions.

    Science.gov (United States)

    Attallah, M F; Hamed, Mostafa M; El Afifi, E M; Aly, H F

    2015-01-01

    The feasibility of using surfactants as extracting agent for the removal of radium species from TENORM sludge produced from petroleum industry is evaluated. In this investigation cationic and nonionic surfactants were used as extracting agents for the removal of radium radionuclides from the sludge waste. Two surfactants namely cetyltrimethylammonium bromide (CTAB) and Triton X-100 (TX100) were investigated as the extracting agents. Different parameters affecting the removal of both (226)Ra and (228)Ra by the two surfactants as well as their admixture were studied by the batch technique. These parameters include effect of shaking time, surfactants concentration and temperature as well as the effect of surfactants admixture. It was found that, higher solution temperature improves the removal efficiency of radium species. Combined extraction of nonionic and cationic surfactants produces synergistic effect in removal both (226)Ra and (228)Ra, where the removals reached 84% and 80% for (226)Ra and (228)Ra, respectively, were obtained using surfactants admixture.

  9. Conformational and phase transitions in DNA--photosensitive surfactant solutions: Experiment and modeling.

    Science.gov (United States)

    Kasyanenko, N; Lysyakova, L; Ramazanov, R; Nesterenko, A; Yaroshevich, I; Titov, E; Alexeev, G; Lezov, A; Unksov, I

    2015-02-01

    DNA binding to trans- and cis-isomers of azobenzene containing cationic surfactant in 5 mM NaCl solution was investigated by the methods of dynamic light scattering (DLS), low-gradient viscometry (LGV), atomic force microscopy (AFM), circular dichroism (CD), gel electrophoresis (GE), flow birefringence (FB), UV-Vis spectrophotometry. Light-responsive conformational transitions of DNA in complex with photosensitive surfactant, changes in DNA optical anisotropy and persistent length, phase transition of DNA into nanoparticles induced by high surfactant concentration, as well as transformation of surfactant conformation under its binding to macromolecule were studied. Computer simulations of micelles formation for cis- and trans-isomers of azobenzene containing surfactant, as well as DNA-surfactant interaction, were carried out. Phase diagram for DNA-surfactant solutions was designed. The possibility to reverse the DNA packaging induced by surfactant binding with the dilution and light irradiation was shown.

  10. Measured and modelled concentrations and vertical profiles of airborne particulate matter within the boundary layer of a street canyon.

    Science.gov (United States)

    Colls, J J; Micallef, A

    1999-09-01

    Concentrations and vertical profiles of various fractions of airborne particulate matter (suspended particulate matter (SPM), PM10 and PM2.5) have been measured over the first three metres from ground in a street canyon. Measurements were carried out using automated near real-time apparatus called the Kinetic Sequential Sampling (KSS) system. KSS system is essentially an electronically-controlled lift carrying a real-time particle monitor for sampling air sequentially, at different heights within the breathing zone, which includes all heights within the surface layer of a street canyon at which people may breathe. Data is automatically logged at the different receptor levels, for the determination of the average vertical concentration profile of airborne particulate matter. For measuring the airborne particle concentration, a Grimm Dust Monitor 1.104/5 was used. The recorded data also allows for time series analysis of airborne particulate matter concentration at different heights. Time series data and hourly-average vertical concentration profiles in the boundary layer of the confines of a street are thought to be mainly determined by traffic emissions and traffic associated processes. Hence the measured data were compared with results of a street canyon emission-dispersion model in time and space. This Street Level Air Quality (SLAQ) model employs the plume-box technique and includes modules for simulating vehicle-generated effects such as thermally- and mechanically-generated turbulence and resuspension of road dust. Environmental processes, such as turbulence resulting from surface sensible heat and the formation of sulphate aerosol from sulphur dioxide exhaust emissions, are taken into account. The paper presents an outline description of the measuring technique and model used, and a comparison of the measured and modelled data.

  11. Measured and modelled concentrations and vertical profiles of airborne particulate matter within the boundary layer of a street canyon

    Energy Technology Data Exchange (ETDEWEB)

    Colls, J.J.; Micallef, A. [Division of Environmental Science, School of Biological Sciences, Sutton Bonington Campus, University of Nottingham, Loughborough LE12 5RD (United Kingdom)

    1999-09-01

    Concentrations and vertical profiles of various fractions of airborne particulate matter (suspended particulate matter (SPM), PM{sub 10} and PM{sub 2.5}) have been measured over the first three metres from ground in a street canyon. Measurements were carried out using automated near real-time apparatus called the Kinetic Sequential Sampling (KSS) system. KSS system is essentially an electronically-controlled lift carrying a real-time particle monitor for sampling air sequentially, at different heights within the breathing zone, which includes all heights within the surface layer of a street canyon at which people may breathe. Data is automatically logged at the different receptor levels, for the determination of the average vertical concentration profile of airborne particulate matter. For measuring the airborne particle concentration, a Grimm Dust Monitor 1.104/5 was used. The recorded data also allows for time series analysis of airborne particulate matter concentration at different heights. Time series data and hourly-average vertical concentration profiles in the boundary layer of the confines of a street are thought to be mainly determined by traffic emissions and traffic associated processes. Hence the measured data were compared with results of a street canyon emission-dispersion model in time and space. This Street Level Air Quality (SLAQ) model employs the plume-box technique and includes modules for simulating vehicle-generated effects such as thermally- and mechanically-generated turbulence and resuspension of road dust. Environmental processes, such as turbulence resulting from surface sensible heat and the formation of sulphate aerosol from sulphur dioxide exhaust emissions, are taken into account. The paper presents an outline description of the measuring technique and model used, and a comparison of the measured and modelled data.

  12. Acute Lethality of Inhaled Hydrogen Cyanide in the Laboratory Rat: Impact of Concentration x Time Profile and Evaluation of the Predictivity of Toxic Load Models

    Science.gov (United States)

    2013-05-03

    Naval Medical Research Unit Dayton Acute Lethality of Inhaled Hydrogen Cyanide in the Laboratory Rat : Impact of Concentration × Time Profile and...Cyanide in the Laboratory Rat : Impact of Concentration x Time Profile and Evaluation of the Predictivity of “Toxic Load” Models. 5a. Contract

  13. Surfactants in atmospheric aerosols and rainwater around lake ecosystem.

    Science.gov (United States)

    Razak, Intan Suraya; Latif, Mohd Talib; Jaafar, Shoffian Amin; Khan, Md Firoz; Mushrifah, Idris

    2015-04-01

    This study was conducted to determine the composition of surfactants in atmospheric aerosols and rainwater in the vicinity of Lake Chini, Malaysia. Samples of atmospheric aerosol and rainwater were collected between March and September 2011 using a high volume air sampler (HVAS) and glass bottles equipped with funnel. Colorimetric analysis was undertaken to determine the concentration of anionic surfactants as methylene blue active substances (MBAS) and cationic surfactants as disulphine blue active substances (DBAS). The water-soluble ionic compositions were determined using inductively coupled plasma mass spectrometry for cations (Na, K, Mg and Ca) and ion chromatography equipped with a conductivity detector for anions (F(-), Cl(-), NO3(-), and SO4(2-)) and the Nessler Method was used to obtain the NH4(+) concentrations. The source apportionment of MBAS and DBAS in atmospheric aerosols was identified using a combination of principal component analysis (PCA) and multiple linear regression (MLR). The results revealed that the concentrations of surfactants in atmospheric aerosols and rainwater were dominated by anionic surfactants as MBAS. The concentration of surfactants as MBAS and DBAS was dominated in fine mode compared to coarse mode aerosols. Using PCA/MLR analysis, two major sources of atmospheric surfactants to Lake Chini were identified as soil dust (75 to 93%) and biomass burning (2 to 22%).

  14. Direct Detection 1.6?m DIAL / Doppler Lidar for Measurements of CO2 Concentration and Wind Profiles (Invited)

    Science.gov (United States)

    Shibata, Y.; Nagasawa, C.; Abo, M.

    2013-12-01

    Knowledge of present carbon sources and sinks including their spatial distribution and their variation in time is one of the essential information for predicting future CO2 atmospheric concentration levels. Moreover, wind information is an important parameter for transport simulations and inverse estimation of surface CO2 flux. The differential absorption lidar (DIAL) and the Doppler wind lidar with the range resolution is expected to measure atmospheric CO2 profiles and wind profiles in the atmospheric boundary layer and lower troposphere from a ground platform. We have succeeded to develop a scanning 1.6 μm DIAL and incoherent Doppler lidar system for simultaneously measuring CO2 concentration and wind speed profiles. Our 1.6 μm DIAL system consists of the Optical Parametric Generator (OPG) transmitter that excited by the LD pumped Nd: YAG laser with high repetition rate (500 Hz) and the receiving optics that included the near-infrared photomultiplier tube with high quantum efficiency operating at the photon counting mode, a fiber Bragg grating (FBG) filter to detect a Doppler shift, and a 25 cm telescope [1] [2]. We had developed an optical parametric oscillator (OPO) system for 1.6 μm CO2 DIAL[3]. To achieve continuous tuning of the resonant OPO output without mode hopping, it is necessary to vary the OPO cavity length synchronously with the seed-frequency. On the other hand, the OPG does not require a cavity and instead rely on sufficient conversion efficiency to be obtained with a single pass through the crystal. The single-frequency oscillation of the OPG was achieved by injection seeding. The CO2-DIAL was operated with the range-height indicator (RHI) mode, and the 2-D measurement provided inhomogeneity in the boundary layer. Vertical CO2 concentration profiles and wind profiles were also measured simultaneously. The elevation angle was fixed at 52 deg and CO2 concentration profiles were obtained up to 1 km altitude with 200 m height resolution. Vertical

  15. Surface tension method for determining binding constants for cyclodextrin inclusion complexes of ionic surfactants

    Energy Technology Data Exchange (ETDEWEB)

    Dharmawardana, U.R.; Christian, S.D.; Tucker, E.E.; Taylor, R.W.; Scamehorn, J.F. (Univ. of Oklahoma, Norman, OK (United States))

    1993-09-01

    A new method has been developed for determining binding constants of complexes of cyclodextrins with surface-active compounds, including water-soluble ionic surfactants. The technique requires measuring the change in surface tension caused by addition of a cyclodextrin (CD) to aqueous solutions of the surfactant; the experimental results lead directly to inferred values of the thermodynamic activity of the surfactant. Surface tension results are reported for three different surfactants sodium dodecyl sulfate (SDS), cetylpyridinium chloride (CPC), and cetyltrimethylammonium bromide (CTAB) in the presence and in the absence of added [beta]-CD. Data for CPC have been obtained at surfactant concentrations below and above the critical micelle concentration. Correlations between surface tension and surfactant activity are expressed by the Szyszkowski equation, which subsumes the Langmuir adsorption model and the Gibbs equation. It is observed that the surface tension increases monotonically as [beta]-cyclodextrin is added to ionic surfactant solutions. At concentrations of CD well in excess of the surfactant concentration, the surface tension approaches that of pure water, indicating that neither the surfactant-CD complexes nor CD itself are surface active. Binding constants are inferred from a model that incorporates the parameters of the Szyszkowski equation and mass action constants relating to the formation of micelles from monomers of the surfactant and the counterion. Evidence is given that two molecules of CD can complex the C-16 hydrocarbon chain of the cetyl surfactants. 30 refs., 5 figs., 1 tab.

  16. Effects of surfactants and salt on Henry's constant of n-hexane.

    Science.gov (United States)

    Yang, Chunping; Chen, Fayuan; Luo, Shenglian; Xie, Gengxin; Zeng, Guangming; Fan, Changzheng

    2010-03-15

    n-Hexane biological removal is intrinsically limited by its hydrophobic nature and low bioavailability. The addition of surfactants could enhance the transport of volatile organic compounds (VOCs) and change the gas-liquid equilibrium of VOCs. In this paper, the effects of four surfactants, sodium dodecyl sulfate (SDS), cetyltrimethylammonium bromide (CTAB), tert-octylphenoxypoly-ethoxyethanol (Triton X-100), polyoxyethylene (20) sorbitan monooleate (Tween 80), and sodium nitrate on apparent Henry's constant of n-hexane in surfactant solutions were investigated. The apparent Henry's constants were significantly reduced when surfactants concentrations exceeded their critical micelle concentrations (cmc's). On a cmc basis, the anionic surfactant SDS was found to have the greatest effect on the apparent Henry's constant with CTAB succeeding, then followed by Triton X-100 and Tween 80. However, the apparent Henry's constant of n-hexane decreased even more rapidly when Triton X-100, a nonionic surfactant, was added than when the ionic surfactant of SDS or CTAB was applied under identical mass concentration and other conditions. These results suggest that Triton X-100 have the biggest solubilization of n-hexane among the four surfactants. Sodium nitrate slightly decreased the apparent Henry's constant of n-hexane in surfactant solutions, and could be considered as a cosolvent in the surfactant-(n-hexane) solution. In addition, the relationship between apparent Henry's constant and surfactant concentration was further developed.

  17. Syntheses of surfactants from oleochemical epoxides

    Directory of Open Access Journals (Sweden)

    Warwel Siegfried

    2001-01-01

    Full Text Available Sugar-based surfactants were obtained in good yields (up to 100% under mild conditions (70°C, methanol or mixtures of methanol and water by ring-opening of terminal epoxides with aminopolyols, derived from glucose. Reaction of N-methyl glucamine with epoxides from even-numbered C4-C18 alpha-olefins or from terminal unsaturated fatty acid methyl esters leads to linear products, while corresponding reactions with N-dodecyl glucamine or glucamine yield surfactants with different Y-structures. Products obtained by conversion of omega-epoxy fatty acid methyl esters were saponificated with NaOH or hydrolyzed enzymatically to sodium salts or free acids respectively, which are amphoteric surfactants. Studies of the surfactants at different pH-values demonstrate different surface active properties in aqueous solutions. Critical micelle concentrations (c.m.c. in a range between 2 and 500mg/l and surface tensions of 25-40mN/m were measured for several of the synthesized sugar-based surfactants. The ring-opening products are rather poor foamers, whereas some of the corresponding hydrobromides show good foaming properties.

  18. Dilute Surfactant Methods for Carbonate Formations

    Energy Technology Data Exchange (ETDEWEB)

    Kishore K. Mohanty

    2006-02-01

    There are many fractured carbonate reservoirs in US (and the world) with light oil. Waterflooding is effective in fractured reservoirs, if the formation is water-wet. Many fractured carbonate reservoirs, however, are mixed-wet and recoveries with conventional methods are low (less than 10%). The process of using dilute anionic surfactants in alkaline solutions has been investigated in this work for oil recovery from fractured oil-wet carbonate reservoirs both experimentally and numerically. This process is a surfactant-aided gravity drainage where surfactant diffuses into the matrix, lowers IFT and contact angle, which decrease capillary pressure and increase oil relative permeability enabling gravity to drain the oil up. Anionic surfactants have been identified which at dilute concentration of 0.05 wt% and optimal salinity can lower the interfacial tension and change the wettability of the calcite surface to intermediate/water-wet condition as well or better than the cationic surfactant DTAB with a West Texas crude oil. The force of adhesion in AFM of oil-wet regions changes after anionic surfactant treatment to values similar to those of water-wet regions. The AFM topography images showed that the oil-wetting material was removed from the surface by the anionic surfactant treatment. Adsorption studies indicate that the extent of adsorption for anionic surfactants on calcite minerals decreases with increase in pH and with decrease in salinity. Surfactant adsorption can be minimized in the presence of Na{sub 2}CO{sub 3}. Laboratory-scale surfactant brine imbibition experiments give high oil recovery (20-42% OOIP in 50 days; up to 60% in 200 days) for initially oil-wet cores through wettability alteration and IFT reduction. Small (<10%) initial gas saturation does not affect significantly the rate of oil recovery in the imbibition process, but larger gas saturation decreases the oil recovery rate. As the core permeability decreases, the rate of oil recovery reduces

  19. Surfactant studies for bench-scale operation

    Science.gov (United States)

    Hickey, Gregory S.; Sharma, Pramod K.

    1993-01-01

    A phase 2 study has been initiated to investigate surfactant-assisted coal liquefaction, with the objective of quantifying the enhancement in liquid yields and product quality. This report covers the second quarter of work. The major accomplishments were: completion of coal liquefaction autoclave reactor runs with Illinois number 6 coal at processing temperatures of 300, 325, and 350 C, and pressures of 1800 psig; analysis of the filter cake and the filtrate obtained from the treated slurry in each run; and correlation of the coal conversions and the liquid yield quality to the surfactant concentration. An increase in coal conversions and upgrading of the liquid product quality due to surfactant addition was observed for all runs.

  20. Evaluation of Acoustic Doppler Velocimeters (ADVs) and Pulse Coherent Acoustic Doppler Profiler (PCADP) in Estimating Suspended Sediment Concentration

    Science.gov (United States)

    Ha, H.; Maa, J.

    2008-12-01

    Laboratory experiments were conducted to estimate the suspended sediment concentration (SSC) or its profile using acoustic backscatter strengths. Three acoustic Doppler velocimeters (ADVs) with different frequencies (5, 10 and 16 MHz) and a pulse coherent acoustic Doppler profiler (PCADP) with 1.5 MHz were used with selected sediments: two different commercial clays and Clay Bank sediment in the York River. Each ADV showed different backscatter responses depending on the sediment type and SSC. Not all devices had a good linear relationship between backscatter strength and SSC. Within a limited range of SSC, however, the backscatter strength can be well correlated with the SSC. Compared with optical backscatter sensor (OBS), ADV's backscatter signals were too noisy to be directly converted to the fluctuation of SSC, due to high amplification ratio and small sampling volume. There is another unexpected response for the backscatter strength: high signals from small particles but low signals from large particles. This might be caused by the internal gain setting built in ADVs, which should be further clarified. For profiling the SSC, a PCADP was tested in a controlled water tank. The sound attenuation by sediments was included in the signal inversion algorithm since most target regions measured by PCADP are located at near-bed high concentration layer. Clay Bank sediment showed a higher correlation coefficient (r2=0.92) between range- corrected volume scattering and PCADP signal when SSCcontrolled by the particle size in suspension at a given frequency. The profiling test for Clay Bank sediments showed that the PCADP-derived SSC profile has a good agreement with sample- and OBS-derived outcomes. This study suggests that both ADV and PCADP are useful instruments to estimate the SSC if the aforementioned questions are clarified and the particle (floc) size is sufficiently large enough to be sensed.

  1. Synthesis and properties of novel gemini surfactant with short spacer

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Cationic gemini surfactant dimethylene-1,2-bis(dodecyldiethylammonium bromide), referred to as C12C2C12(Et) was synthesized, and its surface property and aggregation behavior in aqueous solution were studied. The value of γat the critical micelle concentration (γcmc) is much smaller than that of the surfactant homologues with longer spacer. Spherical and elongated micelles were formed in the aqueous solution of this gemini surfactant,and the spherical micelles were absolutely dominant compared to the elongated micelles at our studied concentration quantitatively.

  2. Estimating suspended solids concentrations from backscatter intensity measured by acoustic Doppler current profiler in San Francisco Bay, California

    Science.gov (United States)

    Gartner, J.W.

    2004-01-01

    The estimation of mass concentration of suspended solids is one of the properties needed to understand the characteristics of sediment transport in bays and estuaries. However, useful measurements or estimates of this property are often problematic when employing the usual methods of determination from collected water samples or optical sensors. Analysis of water samples tends to undersample the highly variable character of suspended solids, and optical sensors often become useless from biological fouling in highly productive regions. Acoustic sensors, such as acoustic Doppler current profilers that are now routinely used to measure water velocity, have been shown to hold promise as a means of quantitatively estimating suspended solids from acoustic backscatter intensity, a parameter used in velocity measurement. To further evaluate application of this technique using commercially available instruments, profiles of suspended solids concentrations are estimated from acoustic backscatter intensity recorded by 1200- and 2400-kHz broadband acoustic Doppler current profilers located at two sites in San Francisco Bay, California. ADCP backscatter intensity is calibrated using optical backscatterance data from an instrument located at a depth close to the ADCP transducers. In addition to losses from spherical spreading and water absorption, calculations of acoustic transmission losses account for attenuation from suspended sediment and correction for nonspherical spreading in the near field of the acoustic transducer. Acoustic estimates of suspended solids consisting of cohesive and noncohesive sediments are found to agree within about 8-10% (of the total range of concentration) to those values estimated by a second optical backscatterance sensor located at a depth further from the ADCP transducers. The success of this approach using commercially available Doppler profilers provides promise that this technique might be appropriate and useful under certain conditions in

  3. Effects of age, adipose percent, and reproduction on PCB concentrations and profiles in an extreme fasting North Pacific marine mammal.

    Directory of Open Access Journals (Sweden)

    Sarah H Peterson

    Full Text Available Persistent organic pollutants, including polychlorinated biphenyls (PCBs, are widely distributed and detectable far from anthropogenic sources. Northern elephant seals (Mirounga angustirostris biannually travel thousands of kilometers to forage in coastal and open-ocean regions of the northeast Pacific Ocean and then return to land where they fast while breeding and molting. Our study examined potential effects of age, adipose percent, and the difference between the breeding and molting fasts on PCB concentrations and congener profiles in blubber and serum of northern elephant seal females. Between 2005 and 2007, we sampled blubber and blood from 58 seals before and after a foraging trip, which were then analyzed for PCBs. Age did not significantly affect total PCB concentrations; however, the proportion of PCB congeners with different numbers of chlorine atoms was significantly affected by age, especially in the outer blubber. Younger adult females had a significantly greater proportion of low-chlorinated PCBs (tri-, tetra-, and penta-CBs than older females, with the opposite trend observed for hepta-CBs, indicating that an age-associated process such as parity (birth may significantly affect congener profiles. The percent of adipose tissue had a significant relationship with inner blubber PCB concentrations, with the highest mean concentrations observed at the end of the molting fast. These results highlight the importance of sampling across the entire blubber layer when assessing contaminant levels in phocid seals and taking into account the adipose stores and reproductive status of an animal when conducting contaminant research.

  4. Determination of Gd concentration profile in UO2-Gd2O3 fuel pellets

    CERN Document Server

    Tobia, D; Milano, J; Butera, A; Kempf, R; Bianchi, L; Kaufmann, F

    2014-01-01

    A transversal mapping of the Gd concentration was measured in UO2-Gd2O3 nuclear fuel pellets by electron paramagnetic resonance spectroscopy (EPR). The quantification was made from the comparison with a Gd2O3 reference sample. The nominal concentration in the pellets is UO2: 7.5 % Gd2O3. A concentration gradient was found, which indicates that the Gd2O3 amount diminishes towards the edges of the pellets. The concentration varies from (9.3 +/- 0.5)% in the center to (5.8 +/- 0.3)% in one of the edges. The method was found to be particularly suitable for the precise mapping of the distribution of Gd3+ ions in the UO2 matrix.

  5. A coarse-grain molecular dynamics study of oil-water interfaces in the presence of silica nanoparticles and nonionic surfactants

    Science.gov (United States)

    Katiyar, Parul; Singh, Jayant K.

    2017-05-01

    In this work, we have studied the effect of hydrophilic silica nanoparticles (NPs), in the presence of nonionic surfactants (Triethylene glycol monododecyl ether and Tween 20), on the oil-water (n-octane-water, n-dodecane-water and n-hexadecane-water) interfacial tensions (IFTs) at 300 K, using coarse-grained molecular dynamics simulations based on the MARTINI force field. Simulation results indicate that silica NPs solely do not affect the IFT. However, the silica NPs may or may not increase the IFT of oil-water containing nonionic surfactant, depending on the tendency of the surfactant to adsorb on the surface of NPs. The adsorption occurs due to the formation of hydrogen bonds, and adsorption increases with a decrease in pH, as seen in experimental studies. In this work, we found that the oil-water IFT increases with an increasing amount of adsorption of the surfactant on NPs. At a fixed amount of adsorption of the surfactant on NPs, the IFT behavior is indifferent to the change in concentration of NPs. However, the IFT decreases with an increase in surfactant concentration. We present a detailed analysis of the density profile and intrinsic width of the interface. The IFT behavior is found to correlate extremely well with the intrinsic width of the interface. The current study provides an explanation for the increase in IFT observed in a recent experiment [N. R. Biswal et al., J. Phys. Chem. B 120, 7265-7274 (2016)] for various types of NPs and nonionic surfactant systems.

  6. Fibrinogen stability under surfactant interaction.

    Science.gov (United States)

    Hassan, Natalia; Barbosa, Leandro R S; Itri, Rosangela; Ruso, Juan M

    2011-10-01

    Differential scanning calorimetry (DSC), circular dichroism (CD), difference spectroscopy (UV-vis), Raman spectroscopy, and small-angle X-ray scattering (SAXS) measurements have been performed in the present work to provide a quantitatively comprehensive physicochemical description of the complexation between bovine fibrinogen and the sodium perfluorooctanoate, sodium octanoate, and sodium dodecanoate in glycine buffer (pH 8.5). It has been found that sodium octanoate and dodecanoate act as fibrinogen destabilizer. Meanwhile, sodium perfluorooctanoate acts as a structure stabilizer at low molar concentration and as a destabilizer at high molar concentration. Fibrinogen's secondary structure is affected by all three studied surfactants (decrease in α-helix and an increase in β-sheet content) to a different extent. DSC and UV-vis revealed the existence of intermediate states in the thermal unfolding process of fibrinogen. In addition, SAXS data analysis showed that pure fibrinogen adopts a paired-dimer structure in solution. Such a structure is unaltered by sodium octanoate and perfluoroctanoate. However, interaction of sodium dodecanoate with the fibrinogen affects the protein conformation leading to a complex formation. Taken together, all results evidence that both surfactant hydrophobicity and tail length mediate the fibrinogen stability upon interaction. Copyright © 2011 Elsevier Inc. All rights reserved.

  7. Use of surfactants to control island size and density

    Energy Technology Data Exchange (ETDEWEB)

    Merrell, Jason; Liu, Feng; Stringfellow, Gerald B.

    2017-08-15

    Methods of controlling island size and density on an OMVPE growth film may comprise adding a surfactant at a critical concentration level, allowing a growth phase for a first period of time, and ending the growth phase when desired island size and density are achieved. For example, the island size and density of an OMVPE grown InGaN thin film may be controlled by adding an antimony surfactant at a critical concentration level.

  8. Effect of nonionic surfactant Brij 35 on the fate and transport of oxytetracycline antibiotic in soil.

    Science.gov (United States)

    Elsayed, Eman M; Prasher, Shiv O; Patel, Ramanbhai M

    2013-02-15

    In many parts of the world, river water is used for irrigation. Treated, partially treated, and even untreated water from wastewater treatment plants is discharged directly into rivers, thereby degrading the quality of the water. Consequently, irrigation water may contain surfactants which may affect the fate and transport of chemicals such as pesticides and antibiotics in agricultural soils. A field lysimeter study was undertaken to investigate the effect of the nonionic surfactant, Brij 35, on the fate and transport of an antibiotic, Oxytetracycline, commonly used in cattle farms. Nine PVC lysimeters, 1.0 m long × 0.45 m diameter, were packed with a sandy soil to a bulk density of 1.35 Mg m(-3). Cattle manure, containing Oxytetracycline, was applied at the surface of the lysimeters at the recommended rate of 10 t/ha. Each of three aqueous Brij 35 solutions, 0, 0.5 and 5 g L(-1) (i.e., 'good,' 'poor' and 'very poor' quality irrigation water) were each applied to the lysimeters in triplicate. Over a 90 day period, soil and leachate samples were collected and analyzed. Batch experiment results showed that the presence of the nonionic surfactant Brij 35 significantly reduced the sorption coefficient of OTC from 23.55 mL g(-1) in the aqueous medium to 19.49, 12.49 and 14.53 in the presence of Brij 35 at concentrations of 0.25, 2.5 and 5 g L(-1), respectively. Lysimeter results indicted the significant downward movement of OTC at depths of 60 cm into soil profile and leachate in the presence of surfactant. Thus, the reuse of wastewater containing surfactants might enhance the mobility of contaminants and increase ground water pollution.

  9. Use of a surfactant coacervate phase to extract trichloroethylene from water

    Energy Technology Data Exchange (ETDEWEB)

    Kimchuwanit, W.W.; Scamehorn, J.F.; Osuwan, S. [Univ. of Oklahoma, Norman, OK (United States)] [and others

    1996-10-01

    At temperatures above the cloud point, aqueous nonionic surfactant solutions can separate into two phases: a surfactant-rich coacervate phase and a surfactant-dilute phase. Since the coacervate phase can be a concentrated micellar solution, organic solute tends to concentrate in the coacervate due to solubilization. In this study, up to 90% of trichloroethylene was shown to be extracted into the coacervate phase in one stage. Increasing temperature, surfactant concentration, and added NaCl concentration all improved the fraction of TCE extracted.

  10. Surfactant-Amino Acid and Surfactant-Surfactant Interactions in Aqueous Medium: a Review.

    Science.gov (United States)

    Malik, Nisar Ahmad

    2015-08-01

    An overview of surfactant-amino acid interactions mainly in aqueous medium has been discussed. Main emphasis has been on the solution thermodynamics and solute-solvent interactions. Almost all available data on the topic has been presented in a lucid and simple way. Conventional surfactants have been discussed as amphiphiles forming micelles and amino acids as additives and their effect on the various physicochemical properties of these conventional surfactants. Surfactant-surfactant interactions in aqueous medium, various mixed surfactant models, are also highlighted to assess their interactions in aqueous medium. Finally, their applied part has been taken into consideration to interpret their possible uses.

  11. Concentrations and composition profiles of parabens in currency bills and paper products including sanitary wipes.

    Science.gov (United States)

    Liao, Chunyang; Kannan, Kurunthachalam

    2014-03-15

    Parabens (alkyl esters of p-hydroxybenzoic acid) are widely used as antimicrobial preservatives in personal care products, pharmaceuticals, and foodstuffs. Although parabens have been reported to be used as antimicrobials in certain types of papers (e.g., wet sanitary or hygiene wipes), little is known about the occurrence of these compounds in paper products. In this study, we determined the concentrations of six paraben analogs, methyl (MeP), ethyl (EtP), propyl (PrP), butyl (BuP), benzyl (BzP), and heptyl parabens (HepP), in 253 paper products divided into 18 categories, using liquid chromatography-tandem mass spectrometry (LC-MS/MS). At least one of the six parabens was detected in almost all (detection rate: 98%) paper samples, and the total concentrations (∑PBs; sum of six parabens) ranged from 1.85 to 3,220,000 ng/g (geometric mean (GM): 103; median: 55.1 ng/g). Sanitary wipes contained very high concentrations of ∑PBs (GM: 8300 ng/g). Paper currencies, tickets, business cards, food cartons, flyers, and newspapers contained notable concentrations of ∑PBs, and the GM concentrations in these paper categories were on the order of a few tens to thousands of nanograms per gram. One source of parabens in paper products is the use of these chemicals as antifungal agents. MeP and PrP were the predominant analogs, accounting for approximately 62% and 16% of the total concentrations of parabens, respectively. On the basis of measured concentrations and frequency of handling of paper products, we estimated the daily intake (EDI) of parabens through dermal absorption. The GM and 95th percentile EDI values were 6.31 and 2050 ng/day, respectively, for the general population. Among the paper categories analyzed, sanitary wipes contributed to the majority (>90%) of the exposures.

  12. Surfactant Effects on Microemulsion-Based Nanoparticle Synthesis

    Directory of Open Access Journals (Sweden)

    Concha Tojo

    2010-12-01

    Full Text Available The effect of the surfactant on the size, polydispersity, type of size distribution and structure of nanoparticles synthesized in microemulsions has been studied by computer simulation. The model simulates the surfactant by means of two parameters: the intermicellar exchange parameter, kex, related to dimer life time, and film flexibility parameter, f, related to interdroplet channel size. One can conclude that an increase in surfactant flexibility leads to bigger and polydisperse nanoparticle sizes. In addition, at high concentrations, the same reaction gives rise to a unimodal distribution using a flexible surfactant, and a bimodal distribution using a rigid one. In relation to bimetallic nanoparticles, if the nanoparticle is composed of two metals with a moderate difference in reduction potentials, increasing the surfactant flexibility modifies the nanoparticle structure, giving rise to a transition from a nanoalloy (using a rigid film to a core-shell structure (using a flexible one.

  13. Effect of balanced concentrate ration on the performance and hematobiochemical profile of lactating native ewes and lambs in coastal Odisha

    Directory of Open Access Journals (Sweden)

    Sasanka Sekhar Beura

    2014-12-01

    Full Text Available Aim: The present study was conducted to evaluate the effect of supplementation of balanced concentrate ration during lactation on the growth performance, blood and metabolic profiles of native ewes and lambs in coastal Odisha. Materials and Methods: A total of 40 numbers of lactating ewes of the same parity comprised the experimental animals. The selected ewes were randomly assigned to two groups of twenty each, maintaining uniformity in body weight (13.36±0.33 kg for Group 1 and 13.48±0.37 kg for Group 2. Group 1 was maintained on grazing only while Group 2 was supplemented with a balanced concentrate mixture @ 200 g/head/day during the first 2 months of lactation. The concentrate was fed individually in separate containers in the morning hours before the animals were taken out for grazing. Results: The ewes in Group 2 registered higher body weights at every fortnight. The differences were found to be highly significant (p<0.01 from 2nd to 5th fortnight and significant (p<0.05 for the remaining fortnights. The ewes in Group 2 showed significantly (p<0.01 higher daily gains than those in Group 1 at every fortnight. The hemoglobin (Hb concentration, mean cell hemoglobin (MCH and total leukocyte count (TLC values were significant (p<0.05 between groups at the end of 4th fortnight after lambing and the mean cell hemoglobin concentration (MCHC values is significantly (p<0.05 higher in Group 2 over Group 1. Conclusion: It was concluded that supplementation of a balanced concentrate mixture (crude protein 18.21% @ 200 g/ewe/day along with grazing during the first 2 months of lactation resulted in higher ewe body weight gain. It improved their hematological and metabolic profiles and also resulted in higher body weight gain in lambs born to these supplemented ewes.

  14. Concentration profiles for fine and coarse sediments suspended by waves over ripples: An analytical study with the 1-DV gradient diffusion model

    CERN Document Server

    Absi, Rafik

    2010-01-01

    Field and laboratory measurements of suspended sediments over wave ripples show, for time-averaged concentration profiles in semi-log plots, a contrast between upward convex profiles for fine sand and upward concave profiles for coarse sand. Careful examination of experimental data for coarse sand shows a near-bed upward convex profile beneath the main upward concave profile. Available models fail to predict these two profiles for coarse sediments. The 1-DV gradient diffusion model predicts the main upward concave profile for coarse sediments thanks to a suitable $\\beta$(y)-function (where $\\beta$ is the inverse of the turbulent Schmidt number and y is the distance from the bed). In order to predict the near-bed upward convex profile, an additional parameter {\\alpha} is needed. This parameter could be related to settling velocity ($\\alpha$ equal to inverse of dimensionless settling velocity) or to convective sediment entrainment process. The profiles are interpreted by a relation between second derivative of ...

  15. Profile of organic acid concentrations in the digestive gland and hemolymph of Biomphalaria glabrata under estivation

    Directory of Open Access Journals (Sweden)

    José Clecildo Barreto Bezerra

    1999-11-01

    Full Text Available Using high performance liquid chromatography (HPLC analysis it was possible to determine simultaneously the concentration of organic acids (pyruvate, lactate, succinate, fumarate, malate, acetate, propionate, acetoacetate, and ß-hydroxybutyrate in the digestive gland and the extracellular concentration of these same acids in the hemolymph of estivating Biomphalaria glabrata, the intermediate host of Schistosoma mansoni. After a 7 day period of estivation, there was a significant increase in the tissue levels of lactate, succinate, malate and acetate compared to non-estivating snails. After 14 days of estivation, the levels of lactate and acetate were also significantly elevated. The hemolymph concentrations of pyruvate and acetate increased significantly after 7 days and acetate concentrations continued to be significantly increased up to 14 days of estivation. The other organic acids studied, such as ketone body acetoacetate and ß-hydroxybutyrate or the volatile acid propionate, did not accumulate. Their tissue concentrations, however, increased on the 7th day of estivation and reached normal levels within two weeks of estivation for some of them. One should take into consideration how the reduction in metabolism can be handled under aerobic conditions, and what role anaerobic pathways may play in both energy formation and redox balance processes.

  16. Tracking control of concentration profiles in a fed-batch bioreactor using a linear algebra methodology.

    Science.gov (United States)

    Rómoli, Santiago; Serrano, Mario Emanuel; Ortiz, Oscar Alberto; Vega, Jorge Rubén; Eduardo Scaglia, Gustavo Juan

    2015-07-01

    Based on a linear algebra approach, this paper aims at developing a novel control law able to track reference profiles that were previously-determined in the literature. A main advantage of the proposed strategy is that the control actions are obtained by solving a system of linear equations. The optimal controller parameters are selected through Monte Carlo Randomized Algorithm in order to minimize a proposed cost index. The controller performance is evaluated through several tests, and compared with other controller reported in the literature. Finally, a Monte Carlo Randomized Algorithm is conducted to assess the performance of the proposed controller. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.

  17. Linseed oil supplemented concentrate fed to Brahman crossbred fattening steers on carcass quality traits and intramuscular fatty acid profiles

    Directory of Open Access Journals (Sweden)

    Pitunart Noosen

    2017-02-01

    Full Text Available The objective of this study was to determine the linseed oil supplemented concentrate fed to Brahman crossbred fattening steers on carcass quality trait and intramuscular fatty acid (FA profiles. All steers were fed 14% CP concentrate. The treatments included: (1 7 kg/d concentrate; (2 4 kg/d concentrate supplemented with 200 g/d palm oil (PO; (3 4 kg/d concentrate supplemented with 100 g/d PO and 100 g/d linseed oil (LSO; and (4 4 kg/d concentrate supplemented with 200 g/d LSO. The animals in the treatment 1 were fed ad libitum rice straw (RS, whereas the animals in other treatments were fed ad libitum fresh grass (FG. Dietary treatments had no effect on nutrient intake while oil supplement decreased dry matter intake (DMI. Inclusion of LSO did not negatively affect carcass quality, but increasing amount of LSO supplement increased the n-3 fatty acids and lowered the n-6/n-3 ratio in beef

  18. Surfactant aggregation and its application to drag reduction

    Energy Technology Data Exchange (ETDEWEB)

    Harwigsson, I.

    1995-09-01

    A number of different drag-reducing (DR) surfactants: nonionics, zwitterionics and ampholytics suitable for use in both cool and hot water solution are described. These surfactants have been tested under various conditions common in district energy distribution. The surfactants described are environmentally more acceptable than the organic salts of quaternary ammonium compounds which have so far dominated as DR surfactants. The micellar phase formed in water by the surfactant system cetylpyridinium chloride/sodium salicylate has been investigated with surfactant self-diffusion (NMR) measurements and cryo-transmission electron microscopy. Results from this study support the hypothesis that worm-like micellar systems form a network before the phase boundary, when the first liquid crystalline phase formed is a bicontinuous cubic phase. A series of surfactants similar to the one used in the DR experiments has been examined in dilute solutions. Critical micellar concentration and the size of these micelles are investigated as a function of the amphiphile concentration, the pH and salt concentration. Adsorption properties on silica of zwitterionic dodecyl-N,N-dimethylammonio alkanoates, with polymethylene interchange arms of different lengths, have been investigated with an in situ ellipsometry technique. The use of two-tone frequency modulation spectroscopy as a general method for the determination of water activity has been initiated. 173 refs, 6 figs

  19. Water solubility enhancements of pyrene by single and mixed surfactant solutions

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Water solubility enhancements of pyrene by both single-surfactant and mixed-surfactant solutions were compared andevaluated. The solubility of pyrene in water was greatly enhanced by each of Triton X-100 (TX100), Triton X-405 (TX405), Brij 35 and SDS, in which the water solubility enhancements increased with increasing surfactant concentrations. The extent of solubility enhancements at surfactant concentrations below the CMC is the order of TX100 > Brij 35 > TX405 > SDS; the sequence at surfactantconcentrations above the CMC is TX100 > Brij 35 > SDS > TX405. Pyrene was solubilized synergistically by anionic-nonionic mixed surfactant solutions, especially at low surfactant concentrations. The synergistic power of the mixed surfactants is SDS-TX405 > SDS-Brij 35 > SDS-TX100. The synergism as noted is attributed to increasing Kmc and/or decreasing the CMC of the mixed surfactan solution. For SDS-TX405 and SDS-Brij 35 mixed surfactant solutions, an increase in Kmc is coupled with a decrease in the CMC; for SDS-TX100, only a decreased in the CMC value is noted. Mixed-surfactant solutions may improve the performance of the surfactant-enhanced remediation (SER) of soils by increasing the bioavailability and biodegradation of non-aqueous-phase organic pollutants and reducing the level of surfactant pollution and remediation expenses.

  20. Solubilization capacity of nonionic surfactant micelles exhibiting strong influence on export of intracellular pigments in Monascus fermentation

    Science.gov (United States)

    Kang, Biyu; Zhang, Xuehong; Wu, Zhenqiang; Qi, Hanshi; Wang, Zhilong

    2013-01-01

    Summary In this study, perstractive fermentation of intracellular Monascus pigments in nonionic surfactant micelle aqueous solution had been studied. The permeability of cell membrane modified by nonionic surfactant might have influence on the rate of export of intracellular pigments into its extracellular broth while nearly no effect on the final extracellular pigment concentration. However, the solubilization of pigments in nonionic surfactant micelles strongly affected the final extracellular pigment concentration. The solubilization capacity of micelles depended on the kind of nonionic surfactant, the super-molecule assembly structure of nonionic surfactant in an aqueous solution, and the nonionic surfactant concentration. Elimination of pigment degradation by export of intracellular Monascus pigments and solubilizing them into nonionic surfactant micelles was also confirmed experimentally. Thus, nonionic surfactant micelle aqueous solution is potential for replacement of organic solvent for perstractive fermentation of intracellular product. PMID:23425092

  1. Solubilization capacity of nonionic surfactant micelles exhibiting strong influence on export of intracellular pigments in Monascus fermentation.

    Science.gov (United States)

    Kang, Biyu; Zhang, Xuehong; Wu, Zhenqiang; Qi, Hanshi; Wang, Zhilong

    2013-09-01

    In this study, perstractive fermentation of intracellular Monascus pigments in nonionic surfactant micelle aqueous solution had been studied. The permeability of cell membrane modified by nonionic surfactant might have influence on the rate of export of intracellular pigments into its extracellular broth while nearly no effect on the final extracellular pigment concentration. However, the solubilization of pigments in nonionic surfactant micelles strongly affected the final extracellular pigment concentration. The solubilization capacity of micelles depended on the kind of nonionic surfactant, the super-molecule assembly structure of nonionic surfactant in an aqueous solution, and the nonionic surfactant concentration. Elimination of pigment degradation by export of intracellular Monascus pigments and solubilizing them into nonionic surfactant micelles was also confirmed experimentally. Thus, nonionic surfactant micelle aqueous solution is potential for replacement of organic solvent for perstractive fermentation of intracellular product.

  2. Study of surfactant-skin interactions by skin impedance measurements.

    Science.gov (United States)

    Lu, Guojin; Moore, David J

    2012-02-01

    The stratum corneum (SC) plays a very critical physiological role as skin barrier in regulating water loss through the skin and protects the body from a wide range of physical and chemical exogenous insults. Surfactant-containing formulations can induce skin damage and irritation owing to surfactant absorption and penetration. It is generally accepted that reduction in skin barrier properties occurs only after surfactants have penetrated/permeated into the skin barrier. To mitigate the harshness of surfactant-based cleansing products, penetration/permeation of surfactants should be reduced. Skin impedance measurements have been taken in vitro on porcine skin using vertical Franz diffusion cells to investigate the impact of surfactants, temperature and pH on skin barrier integrity. These skin impedance results demonstrate excellent correlation with other published methods for assessing skin damage and irritation from different surfactant chemistry, concentration, pH, time of exposure and temperature. This study demonstrates that skin impedance can be utilized as a routine approach to screen surfactant-containing formulations for their propensity to compromise the skin barrier and hence likely lead to skin irritation.

  3. MRI profiles over very wide concentration ranges: Application to swelling of a bentonite clay

    Science.gov (United States)

    Dvinskikh, S. V.; Szutkowski, K.; Furó, I.

    2009-06-01

    In MRI investigation of soils, clays, and rocks, mainly mobile water is detected, similarly to that in biological and medical samples. However, the spin relaxation properties of water in these materials and/or low water concentration may make it difficult to use standard MRI approaches. Despite these limitations, one can combine MRI techniques developed for solid and liquid states and use independent information on relaxation properties of water, interacting with the material of interest, to obtain true images of both water and material content. We present procedures for obtaining such true density maps and demonstrate their use for studying the swelling of bentonite clay by water. A constant time imaging protocol provides 1D mapping of the clay distribution in regions with clay concentration above 10 vol%. T1 relaxation time imaging is employed to monitor the clay content down to 10 -3 vol%. Data provided by those two approaches are in good agreement in the overlapping range of concentrations. Covering five orders of magnitude of clay concentration, swelling of sodium-exchanged bentonite clays from pre-compacted pellets into a gel phase is followed in detail.

  4. MRI profiles over very wide concentration ranges: application to swelling of a bentonite clay.

    Science.gov (United States)

    Dvinskikh, S V; Szutkowski, K; Furó, I

    2009-06-01

    In MRI investigation of soils, clays, and rocks, mainly mobile water is detected, similarly to that in biological and medical samples. However, the spin relaxation properties of water in these materials and/or low water concentration may make it difficult to use standard MRI approaches. Despite these limitations, one can combine MRI techniques developed for solid and liquid states and use independent information on relaxation properties of water, interacting with the material of interest, to obtain true images of both water and material content. We present procedures for obtaining such true density maps and demonstrate their use for studying the swelling of bentonite clay by water. A constant time imaging protocol provides 1D mapping of the clay distribution in regions with clay concentration above 10 vol%. T(1) relaxation time imaging is employed to monitor the clay content down to 10(-3) vol%. Data provided by those two approaches are in good agreement in the overlapping range of concentrations. Covering five orders of magnitude of clay concentration, swelling of sodium-exchanged bentonite clays from pre-compacted pellets into a gel phase is followed in detail.

  5. Polycyclic aromatic hydrocarbons in urban street dust and surface soil: comparisons of concentration, profile, and source.

    Science.gov (United States)

    Wang, De-Gao; Yang, Meng; Jia, Hong-Liang; Zhou, Lei; Li, Yi-Fan

    2009-02-01

    Street dust and surface soil samples in urban areas of Dalian, a coastal city in Liaoning Province, China, were collected and analyzed for 25 polycyclic aromatic hydrocarbons (PAHs). The concentrations, distribution, and sources of PAHs in dust and soil were determined. The concentrations of total PAHs in street dust ranged between 1890 and 17,070 ng/g (dry weight), with an average of 7460 ng/g, whereas the concentrations of total PAHs in surface soil varied greatly, from 650 to 28,900 ng/g, with a mean value of 6440 ng/g. Statistical paired t-test confirmed that total PAH concentrations have no significant difference between street dust and surface soil. Mean PAH concentrations in two type samples were much higher at industrial sites than at business/residential or garden sites. PAHs were dominated by higher molecular weight PAH (4- to 6-ring) homologues, which accounted for about 73% and 72% of total PAHs in street dust and surface soil, respectively. Principal component analysis was used in source apportionment of PAHs in dust and soil. Pyrogenic and petrogenic sources contributed 70% and 22.4% of total PAHs in street dusts, and fossil fuel (coal and petroleum) and biomass combustion accounted for 64.4% and 5.6% of total PAHs in pyrogenic sources, respectively. In surface soil, total PAHs were dominated by pyrogenic sources. The diagnostic ratios of benz[a]anthracene/chrysene confirmed that PAHs in street dust and surface soil of a Dalian urban zone might come mostly from the emission of local sources.

  6. Mechanisms for lowering of interfacial tension in alkali/acidic oil systems; Effect of added surfactant

    Energy Technology Data Exchange (ETDEWEB)

    Rudin, J. Wasan, D.T. (Illinois Inst. of Tech., Chicago, IL (United States). Dept. of Chemical Engineering)

    1992-08-01

    This paper reports that experimental studies are conducted in order to determine the physicochemical mechanism responsible for lowering of interfacial tension in alkali, surfactant, and surfactant-enhanced alkali/acidic oil systems. A well-defined model oil is chosen to examine the influence of various surfactants and surfactant mixtures, such as oleic acid and its ionic counterpart, sodium dodecyl sulfate, petroleum sulfonate, and isobutanol, on equilibrium interfacial tension. With added surfactant alone, the interfacial tension goes through an ultralow minimum with increasing acid concentration. This proves for the first time that the un-ionized acid species plays a major role in affecting interfacial tension, and the ionized acid species.

  7. Structure and Conformational Dynamics of DMPC/Dicationic Surfactant and DMPC/Dicationic Surfactant/DNA Systems

    Directory of Open Access Journals (Sweden)

    Maciej Kozak

    2013-04-01

    Full Text Available Amphiphilic dicationic surfactants, known as gemini surfactants, are currently studied for gene delivery purposes. The gemini surfactant molecule is composed of two hydrophilic “head” groups attached to hydrophobic chains and connected via molecular linker between them. The influence of different concentrations of 1,5-bis (1-imidazolilo-3-decyloxymethyl pentane chloride (gemini surfactant on the thermotropic phase behaviour of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC bilayers with and without the presence of DNA was investigated using Fourier transformed infrared (FTIR and circular dichroism (CD spectroscopies, small angle scattering of synchrotron radiation and differential scanning calorimetry. With increasing concentration of surfactant in DMPC/DNA systems, a disappearance of pretransition and a decrease in the main phase transition enthalpy and temperature were observed. The increasing intensity of diffraction peaks as a function of surfactant concentration also clearly shows the ability of the surfactant to promote the organisation of lipid bilayers in the multilayer lamellar phase.

  8. Sex, BMI and age in addition to dietary intakes influence blood concentrations and congener profiles of dioxins and PCBs.

    Science.gov (United States)

    Knutsen, Helle K; Kvalem, Helen E; Haugen, Margaretha; Meltzer, Helle M; Brantsaeter, Anne L; Alexander, Jan; Päpke, Olaf; Liane, Veronica H; Becher, Georg; Thomsen, Cathrine

    2011-05-01

    The aim of this study was to i) characterize dietary polychlorinated biphenyls (PCBs) and dioxin exposure in consumers of fish from the PCB contaminated Lake Mjøsa in Norway ii) examine the influence of demographic factors on blood concentrations and congener composition of dioxins and PCBs, iii) characterize dietary sources and possible exposures above tolerable intake. Blood samples were analysed for dioxin-like (dl) compounds (PCDD/Fs and dl-PCBs) and non-dl-PCBs (ndl-PCBs). Dietary exposures were calculated using food frequency questionnaires (n=64). Men had higher median intake of dl-compounds than women (1.2 and 0.85 pg TEQ/kg bw/day), but similar blood concentrations (23.3 and 25.8, pg TEQ/g lipid weight (lw)). For non-dl-PCBs, intakes (6.5 and 4.5 ng/kg bw/day) and blood concentrations (381 and 224 ng/g lw) were higher in men than in women. Blood concentrations correlated with dietary intakes in men only. Increasing BMI and age elevated blood concentrations mainly in women. Men and women had different blood congener profiles, with a higher share of PCB-126 in women, despite similar dietary congener profiles. Eleven participants exceeded the tolerable intake for dl-compounds. Fish from Lake Mjøsa was the main dietary source. The higher influence of BMI and age for women than for men may have implications for risk assessment. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Tracer concentration profiles measured in central London as part of the REPARTEE campaign

    Science.gov (United States)

    Martin, D.; Petersson, K. F.; White, I. R.; Henshaw, S. J.; Nickless, G.; Lovelock, A.; Barlow, J. F.; Dunbar, T.; Wood, C. R.; Shallcross, D. E.

    2011-01-01

    There have been relatively few tracer experiments carried out that have looked at vertical plume spread in urban areas. In this paper we present results from two tracer (cyclic perfluorocarbon) experiments carried out in 2006 and 2007 in central London centred on the BT Tower as part of the REPARTEE (Regent's Park and Tower Environmental Experiment) campaign. The height of the tower gives a unique opportunity to study vertical dispersion profiles and transport times in central London. Vertical gradients are contrasted with the relevant Pasquill stability classes. Estimation of lateral advection and vertical mixing times are made and compared with previous measurements. Data are then compared with a simple operational dispersion model and contrasted with data taken in central London as part of the DAPPLE campaign. This correlates dosage with non-dimensionalised distance from source. Such analyses illustrate the feasibility of the use of these empirical correlations over these prescribed distances in central London.

  10. Tracer concentration profiles measured in central London as part of the REPARTEE campaign

    Directory of Open Access Journals (Sweden)

    D. Martin

    2011-01-01

    Full Text Available There have been relatively few tracer experiments carried out that have looked at vertical plume spread in urban areas. In this paper we present results from two tracer (cyclic perfluorocarbon experiments carried out in 2006 and 2007 in central London centred on the BT Tower as part of the REPARTEE (Regent's Park and Tower Environmental Experiment campaign. The height of the tower gives a unique opportunity to study vertical dispersion profiles and transport times in central London. Vertical gradients are contrasted with the relevant Pasquill stability classes. Estimation of lateral advection and vertical mixing times are made and compared with previous measurements. Data are then compared with a simple operational dispersion model and contrasted with data taken in central London as part of the DAPPLE campaign. This correlates dosage with non-dimensionalised distance from source. Such analyses illustrate the feasibility of the use of these empirical correlations over these prescribed distances in central London.

  11. Tracer concentration profiles measured in central London as part of the REPARTEE campaign

    Directory of Open Access Journals (Sweden)

    D. E. Shallcross

    2009-11-01

    Full Text Available There have been relatively few tracer experiments carried out that have looked at vertical plume spread in urban areas. In this paper we present results from cyclic perfluorocarbon tracer experiments carried out in 2006 and 2007 in central London centred on the BT Tower as part of the REPARTEE (Regent's Park and Tower Environmental Experiment campaign. The height of the tower gives a unique opportunity to study dispersion over a large vertical gradient. These gradients are then compared with classical Gaussian profiles of the relevant stability classes over a range of distances as well as interpretation of data with reference to both anemometry and LIDAR measurements made. Data are then compared with an operational model and contrasted with data taken in central London as part of the DAPPLE campaign looking at dosage compared with non-dimensionalised distance from source. Such analysis illustrates the feasibility of the use of these empirical correlations over these prescribed distances in central London.

  12. A comparative performance study of a photovoltaic concentrator system with discrete mirror and continuos profile for two different absorber shapes

    Energy Technology Data Exchange (ETDEWEB)

    H, Saiful; Rezau, K.M [University of Dhaka, Dhaka (Bangladesh)

    2000-07-01

    Profiles of parabolic concentrators of discrete mirror and continuos surface mirror have been designed for combined electrical thermal photovoltaic systems. In the design the changes of concentration ratio, effect of reflection, angle of incidence over the absorber have been taken into account for maximum energy collection. The performances of the system are studied for solar cells of modified grid finger for illuminations from 1-10 sun. The local concentration ratio (LCR) distribution over the absorbers for both the concentrator, the optical efficiency, thermal efficiency, electrical and thermal power output and overall efficiency have been evaluated for different values of beam radiation concentration ratio and focal distance. [Spanish] Se han disenado perfiles de concentradores parabolicos de espejo discreto y de superficie continua para sistemas fotovoltaicos combinados electricos y termicos. En el diseno los cambios de la proporcion de concentracion, del efecto de la reflexion, del angulo de incidencia sobre el observador se han tenido en cuenta para una maxima recoleccion de energia. Los rendimientos del sistema se han estudiado para celdas solares de parrilla modificada para iluminaciones solares de 1-10. Han sido evaluados para diferentes valores de la proporcion de la concentracion de la radiacion en el rayo y la distancia focal la proporcion de concentracion local (LCR) de la distribucion en los absorbedores, para el concentrador la eficiencia optica, la eficiencia termica, electrica, la produccion de energia termica y electrica y la eficiencia total.

  13. Photosensitive surfactants: micellization and interaction with DNA.

    Science.gov (United States)

    Zakrevskyy, Yuriy; Roxlau, Julian; Brezesinski, Gerald; Lomadze, Nino; Santer, Svetlana

    2014-01-28

    Recently, photosensitive surfactants have re-attracted considerable attention. It has been shown that their association with oppositely charged biologically important polyelectrolytes, such as DNA or microgels, can be efficiently manipulated simply by light exposure. In this article, we investigate the self-assembly of photosensitive surfactants as well as their interactions with DNA by calorimetric and spectroscopic methods. Critical micelle concentration (CMC), standard micellization enthalpy, entropy, and Gibbs energy were determined in different conditions (ionic strengths and temperatures) for a series of cationic surfactants with an azobenzene group in their tail. It is shown, that aggregation forces of photosensitive units play an important role in the micellization giving the major contribution to the micellization enthalpy. The onset of the aggregation can be traced from shift of the absorption peak position in the UV-visible spectrum. Titration UV-visible spectroscopy is used as an alternative, simple, and sensitive approach to estimate CMC. The titration UV-visible spectroscopy was also employed to investigate interactions (CAC: critical aggregation concentration, precipitation, and colloidal stabilization) in the DNA-surfactant complex.

  14. Photosensitive surfactants: Micellization and interaction with DNA

    Science.gov (United States)

    Zakrevskyy, Yuriy; Roxlau, Julian; Brezesinski, Gerald; Lomadze, Nino; Santer, Svetlana

    2014-01-01

    Recently, photosensitive surfactants have re-attracted considerable attention. It has been shown that their association with oppositely charged biologically important polyelectrolytes, such as DNA or microgels, can be efficiently manipulated simply by light exposure. In this article, we investigate the self-assembly of photosensitive surfactants as well as their interactions with DNA by calorimetric and spectroscopic methods. Critical micelle concentration (CMC), standard micellization enthalpy, entropy, and Gibbs energy were determined in different conditions (ionic strengths and temperatures) for a series of cationic surfactants with an azobenzene group in their tail. It is shown, that aggregation forces of photosensitive units play an important role in the micellization giving the major contribution to the micellization enthalpy. The onset of the aggregation can be traced from shift of the absorption peak position in the UV-visible spectrum. Titration UV-visible spectroscopy is used as an alternative, simple, and sensitive approach to estimate CMC. The titration UV-visible spectroscopy was also employed to investigate interactions (CAC: critical aggregation concentration, precipitation, and colloidal stabilization) in the DNA-surfactant complex.

  15. Optimization and mechanism of surfactant accelerating leaching test

    Institute of Scientific and Technical Information of China (English)

    艾纯明; 吴爱祥; 王贻明; 侯春来

    2016-01-01

    To solve the problem of slow leaching speed of copper, surfactant was added into lixivium as leaching agent in the experiment. Based on physical chemistry and seepage flow mechanics, the leaching mechanics of surfactant was analyzed. The solution surface tension and surfactant adsorbing on the surface of ore have a significant impact on the surface wetting effect. With leaching rate for response, the study screened out three main factors by Plackett-Burman design method: the sulfuric acid concentration, surfactant concentration and temperature. Among these three factors, the surfactant concentration is the most important contributor to leaching rate. After obtaining the experiment center by the steepest ascent experiment, a continuous variable surface model was built by response surface methodology. By solving quadratic polynomial equation, optimal conditions for leaching were finally obtained as follows:the sulfuric acid concentration was 60 g/L, the surfactant concentration was 0.00914 mol/L, and the temperature was 45 °C. The leaching rate was 66.81%in the optimized leaching conditions, which was close to the predicted value, showing that regression result was good.

  16. Dynamic surface tension of surfactant TA: experiments and theory.

    Science.gov (United States)

    Otis, D R; Ingenito, E P; Kamm, R D; Johnson, M

    1994-12-01

    A bubble surfactometer was used to measure the surface tension of an aqueous suspension of surfactant TA as a function of bubble area over a range of cycling rates and surfactant bulk concentrations. Results of the surface tension-interfacial area loops exhibited a rich variety of phenomena, the character of which varied systematically with frequency and bulk concentration. A model was developed to interpret and explain these data and for use in describing the dynamics of surface layers under more general circumstances. Surfactant was modeled as a single component with surface tension taken to depend on only the interfacial surfactant concentration. Two distinct mechanisms were considered for the exchange of surfactant between the bulk phase and interface. The first is described by a simple kinetic relationship for adsorption and desorption that pertains only when the interfacial concentration is below its maximum equilibrium value. The second mechanism is "squeeze-out" by which surfactant molecules are expelled from an interface compressed past a maximum packing state. The model provided good agreement with experimental measurements for cycling rates from 1 to 100 cycles/min and for bulk concentrations between 0.0073 and 7.3 mg/ml.

  17. Rheological profiling of organogels prepared at critical gelling concentrations of natural waxes in a triacylglycerol solvent

    OpenAIRE

    Patel, Ashok; Babaahmadifooladi, Mehrnoosh; Lesaffer, Ans; Dewettinck, Koen

    2015-01-01

    The aim of this study was to use a detailed rheological characterization to gain new insights into the gelation behavior of natural waxes. To make a comprehensive case, six natural waxes (differing in the relative proportion of chemical components: hydrocarbons, fatty alcohols, fatty acids, and wax esters) were selected as organogelators to gel high-oleic sunflower oil. Flow and dynamic rheological properties of organogels prepared at critical gelling concentrations (Cg) of waxes were studied...

  18. Generation of arbitrary monotonic concentration profiles by a serial dilution microfluidic network composed of microchannels with a high fluidic-resistance ratio.

    Science.gov (United States)

    Hattori, Koji; Sugiura, Shinji; Kanamori, Toshiyuki

    2009-06-21

    This paper reports a serial dilution microfluidic network composed of microchannels with a high fluidic-resistance ratio for generating linear concentration profiles as well as logarithmic concentration profiles spanning 3 and 6 orders of magnitude. The microfluidic networks were composed of thin fluidic-resistance microchannels with 160 to 730 microm(2) cross-sectional areas and thick diffusion-mixing microchannels with 3,600 to 17,000 microm(2) cross-sectional areas, and were fabricated from polydimethylsiloxane by multilayer photolithography and replica molding. We proposed a design algorithm of the microfluidic network for an arbitrary monotonic concentration profile by means of a hydrodynamic calculation. Because of the high fluidic-resistance ratio of the fluidic-resistance microchannels to the diffusion-mixing microchannels, appropriate geometry and dimensions of the fluidic-resistance microchannels allowed us to obtain desired concentration profiles. The fabricated microfluidic network was compact, occupying a 8 x 18 to 21.0 x 13.5 mm(2) area on the microchip. Both the linear and the logarithmic concentration profiles were successfully generated with the error less than 15% for the linear concentration profile, 22% and 35% for the logarithmic concentration profiles of 3 and 6 orders of magnitude, respectively. The generated linear concentration profiles of the small molecule, calcein, were independent of the flow rate within the range of 0.009 to 0.23 microL/min. The concentration profiles of the large molecules, dextrans, depended on the flow rate and molecular weight. The required residence time of large molecules in the diffusion-mixing microchannel was correlated with dimensionless diffusion time, Fick number, and was discussed based on the scaling law. These compact, stable serial dilution microfluidic networks are expected to be applied to various integrated on-chip analyses.

  19. Polyelectrolyte surfactant aggregates and their deposition on macroscopic surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Voisin, David

    2002-07-01

    Oppositely charged surfactant and polyelectrolyte are present in hair shampoos and conditioners, together with particles (e.g. anti-dandruff agents for scalp) and droplets (e.g. silicone oil for the hair). These are normally formulated at high surfactant concentrations, beyond the flocculation region for the polyelectrolyte concentration used. However, on dilution with water, during application, flocs are formed which carry the particles and droplets to the scalp and hair. The addition of an anionic surfactant to an aqueous solution of cationic polyelectrolyte, at a given concentration, can lead to the formation of polyelectrolyte-surfactant 'particles', in which the surfactant 'binds' to the polyelectrolyte. This occurs from the critical association concentration (CAC), up to the surfactant concentration corresponding to maximum binding. Within this range of surfactant concentrations, the surfactant bound to the polyelectrolyte is thought to associate to form what might be termed 'internal micelles'. Each polyelectrolyte-surfactant particle in the region of the CAC, and just beyond, contains many polyelectrolyte chains, held together essentially by micelle bridges. These particles, however, remain net positively charged, and therefore stable. At the other end of the binding range of the surfactant, so many internal micelles are present that the polymer-surfactant particles are now net negatively charged. Indeed binding stops since no further micelles can be accommodated. Again, the particles are stable. However, there exists a range of surfactant concentrations, lying within the range referred to above, where the net charge is reduced sufficiently that the polymer-surfactant particles will flocculate to form much larger structures. The onset of this second range might be termed the 'critical flocculation concentration' (CFC), and the end, the 'critical stabilisation concentration' (CSC). In this work, the CFC and

  20. An Excel(®)-based visualization tool of 2-D soil gas concentration profiles in petroleum vapor intrusion.

    Science.gov (United States)

    Verginelli, Iason; Yao, Yijun; Suuberg, Eric M

    2016-01-01

    In this study we present a petroleum vapor intrusion tool implemented in Microsoft(®) Excel(®) using Visual Basic for Applications (VBA) and integrated within a graphical interface. The latter helps users easily visualize two-dimensional soil gas concentration profiles and indoor concentrations as a function of site-specific conditions such as source strength and depth, biodegradation reaction rate constant, soil characteristics and building features. This tool is based on a two-dimensional explicit analytical model that combines steady-state diffusion-dominated vapor transport in a homogeneous soil with a piecewise first-order aerobic biodegradation model, in which rate is limited by oxygen availability. As recommended in the recently released United States Environmental Protection Agency's final Petroleum Vapor Intrusion guidance, a sensitivity analysis and a simplified Monte Carlo uncertainty analysis are also included in the spreadsheet.

  1. Electrophoretic separations in poly(dimethylsiloxane) microchips using a mixture of ionic and zwitterionic surfactants.

    Science.gov (United States)

    Guan, Qian; Noblitt, Scott D; Henry, Charles S

    2012-01-01

    The use of mixtures of ionic and zwitterionic surfactants in poly(dimethylsiloxane) (PDMS) microchips is reported. The effect of surfactant concentration on electroosmotic flow (EOF) was studied for a single anionic surfactant (sodium dodecyl sulfate, SDS), a single zwitterionic surfactant (N-tetradecylammonium-N,N-dimethyl-3-ammonio-1-propanesulfonate, TDAPS), and a mixed SDS/TDAPS surfactant system. SDS increased the EOF as reported previously while TDAPS showed an initial increase in EOF followed by a reduction at higher concentrations. When TDAPS was added to a solution containing SDS, the EOF decreased in a concentration-dependent manner. The EOF for all three surfactant systems followed expected pH trends, with increasing EOF at higher pH. The mixed surfactant system allowed tuning of the EOF across a range of pH and concentration conditions. After establishing the EOF behavior, the adsorption/desorption kinetics were measured and showed a slower adsorption/desorption rate for TDAPS than SDS. Finally, the separation and electrochemical detection of model catecholamines in buffer and reduced glutathione in red blood cell lysate using the mixed surfactant system were explored. The mixed surfactant system provided shorter analysis times and/or improved resolution when compared to the single surfactant systems.

  2. Sizing up surfactant synthesis.

    Science.gov (United States)

    Han, SeungHye; Mallampalli, Rama K

    2014-08-01

    Phosphatidylcholine is generated through de novo synthesis and remodeling involving a lysophospholipid. In this issue of Cell Metabolism, research from the Shimizu lab (Harayama et al., 2014) demonstrates the highly selective enzymatic behavior of lysophospholipid acyltransferases. The authors present an enzymatic model for phosphatidylcholine molecular species diversification that impacts surfactant formation.

  3. Diagnostic value of concentration profiles of glucocorticosteroids and endocannabinoids in hair.

    Science.gov (United States)

    Krumbholz, Aniko; Anielski, Patricia; Reisch, Nicole; Schelling, Gustav; Thieme, Detlef

    2013-10-01

    Endogenous corticosteroids and endocannabinoids are both known to be involved in stress adaption and anti-inflammatory and immuneregulatory effects. The application of hair as retrospective specimen for long-term recording of corticosteroids and its association with stress-induced biochemical alterations was intensively examined. To evaluate the stability and correlation of various parameters of the endocannabinoid and corticosteroid systems, a prospective study was carried out. Hair samples were collected monthly over a pregnancy cycle (sixth week of pregnancy to 9 weeks postpartum). By comparison of hair concentrations in particular segments (ie, grown in the same time span but collected at different times), an examination of analyte stability in hair was achieved. Additionally, the comparison of proximal segments provided on biochemical information that is independent of alteration due to physical instability. The detection limits of a validated procedure using solid-phase extraction cleanup and liquid chromatography-mass spectrometry proved to be suitable to identify the endogenous levels of cortisol (limits of detection = 1.6 pg/mg), cortisone (2.1 pg/mg), anandamide (AEA, 0.3 pg/mg), and 2-arachidonoylglycerol (15 pg/mg). Corticosteroid concentrations in corresponding hair segments were found to be reduced with increasing hair age; an average decline of cortisol and cortisone by 50% in 4 months was estimated. Independently, an increase of cortisol and cortisone in proximal segments collected during pregnancy was confirmed, which is assumed to be stress related. Endocannabinoids proved to be by far more stable, as demonstrated by subsequent monthly collection of corresponding segments and there was hardly any washout of AEA detectable. Elevated hair concentrations of AEA and 2-arachidonoylglycerol were detected in the first-second trimester of pregnancy, which corresponds to negative correlations between AEA, cortisol, and cortisone.

  4. Polybrominated diphenyl ethers in sediments from the Southern Yellow Sea: Concentration, composition profile, source identification and mass inventory.

    Science.gov (United States)

    Wang, Guoguang; Peng, Jialin; Xu, Xiang; Zhang, Dahai; Li, Xianguo

    2016-02-01

    The Southern Yellow Sea (SYS) is believed to be influenced by the contaminants from mainland China and the Korean peninsula. Here we report the first record about concentrations of polybrominated diphenyl ethers (PBDEs) in the sediments of the SYS. The concentrations of ∑(7)PBDEs (BDE-28, 47, 99, 100, 153, 154, 183) and BDE-209 were 0.064-0.807 ng g(-1) (dry weight) and 0.067-1.961 ng g(-1) with a mean value of 0.245 ng g(-1) and 0.652 ng g(-1), respectively. These are distinctively low compared with the PBDE levels previously reported in other regions of the world. PBDE concentrations gradually increased from the coastal areas to the central mud area. BDE-209 was the dominant congener, accounting for 70.2-91.6% of the total PBDEs. Congener profiles of PBDEs were similar to those in sediments from the Bohai Sea (BS), Laizhou Bay and modern Yellow River, which might be a tentative indication that they shared similar sources. Principal component analysis (PCA) revealed that PBDEs in the SYS were mainly from continental runoff (69.0%) and atmospheric deposition (31.0%). Depth profile of PBDEs in a sediment core collected from the edge of the central mud area showed that concentration of BDE-209 rapidly increased in recent years, which is in accordance with the replacement in demand and consumption of Penta- and Octa-BDEs by the Deca-BDE. Compared with BS, East China Sea, Erie and Ontario, the SYS was a relatively weak sink of PBDEs (0.102-1.288 t yr(-1) for ∑(7)PBDEs and 0.107-3.129 t yr(-1) for BDE-209) in the world.

  5. Alkaloid profiles, concentration, and pools in velvet lupine (Lupinus leucophyllus) over the growing season.

    Science.gov (United States)

    Lee, Stephen T; Ralphs, Michael H; Panter, Kip E; Cook, Daniel; Gardner, Dale R

    2007-01-01

    Lupinus leucophyllus is one of many lupine species known to contain toxic and/or teratogenic alkaloids that can cause congenital birth defects. The concentrations of total alkaloids and the individual major alkaloids were measured in three different years from different plant parts over the phenological development of the plant. All of the alkaloids were found in the different plant tissues throughout the growing season, although their levels varied in different tissues. Concentrations of total alkaloids and the individual alkaloids varied on an annual basis and in their distribution in the different tissues. Anagyrine levels were highest in the floral tissue, lupanine and unknown F accumulated to the greatest level in the vegetative tissue, and 5,6-dehydrolupanine accumulated to the highest level in the stem. These alkaloids appear to be in a metabolically active state with the teratogenic alkaloid anagyrine accumulating to its highest level in the developing seed. The latter is, thus, the phenological stage posing the greatest danger to grazing livestock.

  6. Empirical model for estimating vertical concentration profiles of re-suspended, sediment-associated contaminants

    Science.gov (United States)

    Zhu, H. W.; Cheng, P. D.; Li, W.; Chen, J. H.; Pang, Y.; Wang, D. Z.

    2017-03-01

    Vertical distribution processes of sediment contaminants in water were studied by flume experiments. Experimental results show that settling velocity of sediment particles and turbulence characteristics are the major hydrodynamic factors impacting distribution of pollutants, especially near the bottom where particle diameter is similar in size to vortex structure. Sediment distribution was uniform along the distance, while contaminant distribution slightly lagged behind the sediment. The smaller the initial sediment concentration was, the more time it took to achieve a uniform concentration distribution for suspended sediment. A contaminants transportation equation was established depending on mass conservation equations. Two mathematical estimation models of pollutant distribution in the overlying water considering adsorption and desorption were devised based on vertical distribution of suspended sediment: equilibrium partition model and dynamic micro-diffusion model. The ratio of time scale between the sediment movement and sorption can be used as the index of the models. When this ratio was large, the equilibrium assumption was reasonable, but when it was small, it might require dynamic micro-diffusion model.

  7. Neighborhood-Scale Spatial Models of Diesel Exhaust Concentration Profile Using 1-Nitropyrene and Other Nitroarenes

    Science.gov (United States)

    Schulte, Jill K.; Fox, Julie R.; Oron, Assaf P.; Larson, Timothy V.; Simpson, Christopher D.; Paulsen, Michael; Beaudet, Nancy; Kaufman, Joel D.; Magzamen, Sheryl

    2016-01-01

    With emerging evidence that diesel exhaust exposure poses distinct risks to human health, the need for fine-scale models of diesel exhaust pollutants is growing. We modeled the spatial distribution of several nitrated polycyclic aromatic hydrocarbons (NPAHs) to identify fine-scale gradients in diesel exhaust pollution in two Seattle, WA neighborhoods. Our modeling approach fused land-use regression, meteorological dispersion modeling, and pollutant monitoring from both fixed and mobile platforms. We applied these modeling techniques to concentrations of 1-nitropyrene (1-NP), a highly specific diesel exhaust marker, at the neighborhood scale. We developed models of two additional nitroarenes present in secondary organic aerosol: 2-nitro-pyrene and 2-nitrofluoranthene. Summer predictors of 1-NP, including distance to railroad, truck emissions, and mobile black carbon measurements, showed a greater specificity to diesel sources than predictors of other NPAHs. Winter sampling results did not yield stable models, likely due to regional mixing of pollutants in turbulent weather conditions. The model of summer 1-NP had an R2 of 0.87 and cross-validated R2 of 0.73. The synthesis of high-density sampling and hybrid modeling was successful in predicting diesel exhaust pollution at a very fine scale and identifying clear gradients in NPAH concentrations within urban neighborhoods. PMID:26501773

  8. Predicting tenocyte expression profiles and average molecular concentrations in Achilles tendon ECM from tissue strain and fiber damage.

    Science.gov (United States)

    Mehdizadeh, Arash; Gardiner, Bruce S; Lavagnino, Michael; Smith, David W

    2017-03-13

    In this study, we propose a method for quantitative prediction of changes in concentrations of a number of key signaling, structural and effector molecules within the extracellular matrix of tendon. To achieve this, we introduce the notion of elementary cell responses (ECRs). An ECR defines a normal reference secretion profile of a molecule by a tenocyte in response to the tenocyte's local strain. ECRs are then coupled with a model for mechanical damage of tendon collagen fibers at different straining conditions of tendon and then scaled up to the tendon tissue level for comparison with experimental observations. Specifically, our model predicts relative changes in ECM concentrations of transforming growth factor beta, interleukin 1 beta, collagen type I, glycosaminoglycan, matrix metalloproteinase 1 and a disintegrin and metalloproteinase with thrombospondin motifs 5, with respect to tendon straining conditions that are consistent with the observations in the literature. In good agreement with a number of in vivo and in vitro observations, the model provides a logical and parsimonious explanation for how excessive mechanical loading of tendon can lead to under-stimulation of tenocytes and a degenerative tissue profile, which may well have bearing on a better understanding of tendon homeostasis and the origin of some tendinopathies.

  9. [Distribution characteristics of soil profile nitrous oxide concentration in paddy fields with different rice-upland crop rotation systems].

    Science.gov (United States)

    Liu, Ping-li; Zhang, Xiao-lin; Xiong, Zheng-qin; Huang, Tai-qing; Ding, Min; Wang, Jin-yang

    2011-09-01

    To investigate the dynamic distribution patterns of nitrous oxide (N2O) in the soil profiles in paddy fields with different rice-upland crop rotation systems, a special soil gas collection device was adopted to monitor the dynamics of N2O at the soil depths 7, 15, 30, and 50 cm in the paddy fields under both flooding and drainage conditions. Two rotation systems were installed, i.e., wheat-single rice and oilseed rape-double rice, each with or without nitrogen (N) application. Comparing with the control, N application promoted the N2O production in the soil profiles significantly (P cropping treatments. The soil N2O concentrations in the treatments without N application peaked in the transitional period from the upland crops cropping to rice planting, while those in the treatments with N application peaked right after the second topdressing N of upland crops. Relatively high soil N2O concentrations were observed at the transitional period from the upland crops cropping to rice planting.

  10. What’s normal? Oligosaccharide concentrations and profiles in milk produced by healthy women vary geographically12

    Science.gov (United States)

    Meehan, Courtney L; McGuire, Mark A; Foster, James; Sellen, Daniel W; Kamau-Mbuthia, Elizabeth W; Kamundia, Egidioh W; Mbugua, Samwel; Moore, Sophie E; Prentice, Andrew M; Kvist, Linda J; Otoo, Gloria E; Brooker, Sarah L; Price, William J; Shafii, Bahman; Placek, Caitlyn; Lackey, Kimberly A; Robertson, Bianca; Ruíz, Lorena; Pareja, Rossina G; Bode, Lars

    2017-01-01

    Background: Human milk is a complex fluid comprised of myriad substances, with one of the most abundant substances being a group of complex carbohydrates referred to as human milk oligosaccharides (HMOs). There has been some evidence that HMO profiles differ in populations, but few studies have rigorously explored this variability. Objectives: We tested the hypothesis that HMO profiles differ in diverse populations of healthy women. Next, we examined relations between HMO and maternal anthropometric and reproductive indexes and indirectly examined whether differences were likely related to genetic or environmental variations. Design: In this cross-sectional, observational study, milk was collected from a total of 410 healthy, breastfeeding women in 11 international cohorts and analyzed for HMOs by using high-performance liquid chromatography. Results: There was an effect of the cohort (P 4 times higher in milk collected in Sweden than in milk collected in rural Gambia (mean ± SEM: 473 ± 55 compared with 103 ± 16 nmol/mL, respectively; P < 0.05), and disialyllacto-N-tetraose (DSLNT) concentrations ranged from 216 ± 14 nmol/mL (in Sweden) to 870 ± 68 nmol/mL (in rural Gambia) (P < 0.05). Maternal age, time postpartum, weight, and body mass index were all correlated with several HMOs, and multiple differences in HMOs [e.g., lacto-N-neotetrose and DSLNT] were shown between ethnically similar (and likely genetically similar) populations who were living in different locations, which suggests that the environment may play a role in regulating the synthesis of HMOs. Conclusions: The results of this study support our hypothesis that normal HMO concentrations and profiles vary geographically, even in healthy women. Targeted genomic analyses are required to determine whether these differences are due at least in part to genetic variation. A careful examination of sociocultural, behavioral, and environmental factors is needed to determine their roles in this regard. This

  11. Tangential Velocity Profile for Axial Flow Through Two Concentric Rotating Cylinders with Radial Magnetic Field

    Directory of Open Access Journals (Sweden)

    Girishwar Nath

    1970-10-01

    Full Text Available A closed form solution of the Navier-Stokes equations has been obtained in the case of steady axisymmetric flow of an incompressible electrically conducting viscous fluid between two concentric rotating cylinders composed of an insulating material under the influence of radial magnetic field. It has been found that the velocity components are less than those of the classical hydrodynamic case. In the presence of the magnetic field, the tangential velocity becomes fully developed in a smaller axial distance than in the absence of the magnetic field. For small Reynolds number, the fully developed tangential velocity is achieved in a small axial distance, but it requires greater axial distance for large Reynolds number.

  12. A Comparison of HCHO and CHOCHO Concentrations and Profiles in Three North American Forests

    Science.gov (United States)

    Galloway, M. M.; Digangi, J. P.; Henry, S. B.; Kammrath, A.; Thurlow, M. E.; O'Brien, A.; Boyle, E.; Keutsch, F. N.; Bearpex Science Team; Cabinex Science Team; Beachon-Rocs Science Team

    2010-12-01

    The oxidation of volatile organic compounds (VOCs) is central to the production of tropospheric ozone smog and the formation of secondary organic aerosol (SOA). The oxidation of biogenic VOCs (BVOCs), such as isoprene and terpenes emitted from forests, can result in elevated ozone and aerosol concentrations in rural areas away from urban pollution. Formaldehyde (HCHO) and glyoxal (GLY) are among the most ubiquitous VOC oxidation intermediates and are therefore important tracers of VOC oxidation. It has also been suggested that glyoxal may be a significant source of SOA (Volkamer, 2005). Together, these compounds provide insight into both the rate of VOC oxidation and source of VOC precursors in an environment. Both compounds were measured simultaneously during three pristine forest field campaigns (BEARPEX 2009, CABINEX 2009, and BEACHON-ROCS 2010). We present a comparison of our results from these campaigns, focusing on HCHO/GLY ratios and correlations of HCHO and GLY with other species.

  13. The use of tunnel concentration profile data to determine the ratio of NO2/NOx directly emitted from vehicles

    Directory of Open Access Journals (Sweden)

    M. Fang

    2005-12-01

    Full Text Available Recently, it is reported that primary vehicular NO2/NOx ratio to be 10–30% and primary vehicular NO2 has raised much interest and concern in the control of NO2 in urban areas. In this study, primary vehicular NO2/NOx ratio in Hong Kong was investigated based on intensive long tunnel (3.7–4 km in length experiments where concentration profiles of air pollutants along the entire lengths of the tunnels were obtained. Long tunnels were selected because of the inherent low O3 concentrations in the partially enclosed environment. In addition the concentrations of pollutants from vehicles are high. Thus, the NO2 measured inside long tunnels would be more representative of the primary NO2 emitted by vehicles and contribution due to atmospheric transformation would be limited. This dataset was supported by a long-term on-road air quality dataset (June 2002–August 2003. Both datasets were obtained using the Mobile Real-time Air Monitoring Platform (MAP. The primary on-road vehicular NO2/NOx ratio was less than 2%, detected in the mid sections of tunnels investigated, where O3 concentration was at a minimum. In sections of the tunnels (entrance and exit where O3 concentrations were relatively high, the NO2/NOx ratio could be as high as 19%. Long-term (annual average on-road air quality data in open air yielded NO2/NOx ratios up to 28%. Thus, it is apparent that directly emitted NO2 from vehicles is not significant in atmospheric NO2 concentration. A simple model was used to segregate the contribution of background NO2 and transformed NO2 measured in vehicle plumes.

  14. The effects of vehicle emissions and nucleation events on vertical particle concentration profiles around urban office buildings

    Directory of Open Access Journals (Sweden)

    T. N. Quang

    2012-01-01

    Full Text Available Despite its role in determining both indoor and outdoor human exposure to anthropogenic particles, there is limited information describing vertical profiles of particle concentrations in urban environments, especially for ultrafine particles. Furthermore, the results of the few studies performed have been inconsistent. As such this study aimed to assess the influence of vehicle emissions and nucleation formation on particle concentrations (PN and PM2.5 at different heights around three urban office buildings located next to busy roads in Brisbane, Australia, and place these results in the broader context of the existing literature. Two sets of instruments were used to simultaneously measure PN size distribution, PN and PM2.5 concentrations, respectively, for up to three weeks each at three office buildings.

    The results showed that both PN and PM2.5 concentrations around building envelope were influenced by vehicle emissions and new particle formation, and that they exhibited variability across the three different office buildings. During the nucleation event, PN concentrations increased (21–46%, while PM2.5 concentrations decreased (36–52% with height at all three buildings.

    This study has shown an underappreciated role of nucleation in producing particles that can affect large numbers of people, due to the high density and occupancy of urban office buildings and the fact that the vast majority of people's time is spent indoors. These findings highlight important new information related to the previously overlooked role of particle formation in the urban atmosphere and its potential effects on selection of air intake locations and appropriate filter types when designing or upgrading mechanical ventilation systems in urban office buildings. The results also serve to better define particle behaviour and variability around building envelopes, which has implications for studies of

  15. Self-consistent-field analysis of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) surfactants: micellar structure, critical micellization concentration, critical micellization temperature, and cloud point

    NARCIS (Netherlands)

    Bruijn, de V.G.; Broeke, van den L.J.P.; Leermakers, F.A.M.; Keurentjes, J.T.F.

    2002-01-01

    The self-assembly of a series of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) surfactants into spherical micelles has been analyzed by a numerical self-consistent-field model. A united atom description is used in which three segment types are identified, that is,

  16. Self-consistent-field analysis of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) surfactants: micellar structure, critical micellization concentration, critical micellization temperature, and cloud point

    NARCIS (Netherlands)

    Bruijn, de V.G.; Broeke, van den L.J.P.; Leermakers, F.A.M.; Keurentjes, J.T.F.

    2002-01-01

    The self-assembly of a series of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) surfactants into spherical micelles has been analyzed by a numerical self-consistent-field model. A united atom description is used in which three segment types are identified, that is, CH2

  17. Use of watershed factors to predict consumer surfactant toxic units in the upper Trinity river, Texas

    DEFF Research Database (Denmark)

    Johnson, David; Sanderson, Hans; Atkinson, Sam

    2009-01-01

    for surfactant loading into the environment. The objective of this project was to determine whether surfactant concentrations, expressed as toxic units, in-stream water quality, and aquatic habitat in the upper Trinity River could be predicted based on easily accessible watershed characteristics. Surface water...... surfactant concentrations were determined, and total surfactant toxic units were calculated. GIS models of geospatial, anthropogenic factors (e.g., population density) and natural factors (e.g., soil organic matter) were collected and analyzed according to subwatersheds. Multiple regression analyses using......Surfactants are high production volume chemicals that are used in a wide assortment of "down-the-drain" consumer products. Wastewater treatment plants (WWTPs) generally remove 85 to more than 99% of all surfactants from influents, but residual concentrations are discharged into receiving waters via...

  18. A novel biosensor method for surfactant determination based on acetylcholinesterase inhibition

    Science.gov (United States)

    Kucherenko, I. S.; Soldatkin, O. O.; Arkhypova, V. M.; Dzyadevych, S. V.; Soldatkin, A. P.

    2012-06-01

    A novel enzyme biosensor based on acetylcholinesterase inhibition for the determination of surfactants in aqueous solutions is described. Acetylcholinesterase-based bioselective element was deposited via glutaraldehyde on the surface of conductometric transducers. Different variants of inhibitory analysis of surfactants were tested, and finally surfactant's concentration was evaluated by measuring initial rate of acetylcholinesterase inhibition. Besides, we studied the effect of solution characteristics on working parameters of the biosensor for direct measurement of acetylcholine and for inhibitory determination of surfactants. The biosensor's sensitivity to anionic and cationic surfactants (0.35 mg l-1) was tested. The high operational stability of the biosensor during determination of acetylcholine (RSD 2%) and surfactants (RSD 11%) was shown. Finally, we discussed the selectivity of the biosensor toward surfactants and other AChE inhibitors. The proposed biosensor can be used as a component of the multibiosensor for ecological monitoring of toxicants.

  19. Changes in 16s RNA Gene Microbial Community Profiling by Concentration of Prokaryotic DNA.

    Science.gov (United States)

    Glassing, Angela; Dowd, Scot E; Galandiuk, Susan; Davis, Brian; Jorden, Jeffrey R; Chiodini, Rodrick J

    2015-12-01

    Microbial metagenomics are hindered in clinical tissue samples as a result of the large relative amount of human DNA in relation to microbial DNA acting as competitive inhibitors of downstream applications. We evaluated the LOOXSTER® Enrichment Kit to separate eukaryotic and prokaryotic DNA in submucosal intestinal tissue samples having a low microbial biomass and to determine the effects of enrichment on 16s rRNA microbiota sequencing. The enrichment kit reduced the amount of human DNA in the samples 40-70% resulting in a 3.5-fold increase in the number of 16s bacterial gene sequences detected on the Illumina MiSeq platform. This increase was accompanied by the detection of 41 additional bacterial genera and 94 tentative species. The additional bacterial taxa detected accounted for as much as 25% of the total bacterial population that significantly altered the relative prevalence and composition of the intestinal microbiota. The ability to reduce the competitive inhibition created by human DNA and the concentration of bacterial DNA may allow metagenomics to be performed on complex tissues containing a low bacterial biomass.

  20. Direct measurement of local dissolved oxygen concentration spatial profiles in a cell culture environment.

    Science.gov (United States)

    Kagawa, Yuki; Matsuura, Katsuhisa; Shimizu, Tatsuya; Tsuneda, Satoshi

    2015-06-01

    Controlling local dissolved oxygen concentration (DO) in media is critical for cell or tissue cultures. Various biomaterials and culture methods have been developed to modulate DO. Direct measurement of local DO in cultures has not been validated as a method to test DO modulation. In the present study we developed a DO measurement system equipped with a Clark-type oxygen microelectrode manipulated with 1 μm precision in three-dimensional space to explore potential applications for tissue engineering. By determining the microelectrode tip position precisely against the bottom plane of culture dishes with rat or human cardiac cells in static monolayer culture, we successfully obtained spatial distributions of DO in the medium. Theoretical quantitative predictions fit the obtained data well. Based on analyses of the variance between samples, we found the data reflected "local" oxygen consumption in the vicinity of the microelectrode and the detection of temporal changes in oxygen consumption rates of cultured cells was limited by the diffusion rate of oxygen in the medium. This oxygen measuring system monitors local oxygen consumption and production with high spatial resolution, and can potentially be used with recently developed oxygen modulating biomaterials to design microenvironments and non-invasively monitor local DO dynamics during culture. © 2015 Wiley Periodicals, Inc.

  1. Research on surfactant flooding in high temperature and high-salinity reservoir for enhanced oil recovery

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Ming [Southwest Petroleum Univ., Chengdu, Sichuan (China). State Key Lab. of Oil and Gas Reservoir Geology and Exploitation; Southwest Petroleum Univ., Chengdu, Sichuan (China). School of Material Science and Engineering; Zhao, Jinzhou; Yang, Yan [Southwest Petroleum Univ., Chengdu, Sichuan (China). State Key Lab. of Oil and Gas Reservoir Geology and Exploitation; Wang, Xu [Southwest Petroleum Univ., Chengdu, Sichuan (China). School of Material Science and Engineering

    2013-05-15

    The aim of this work was to research the solution properties of a new surfactant flooding system for high temperature and high salinity reservoir, which include trimeric sulfonate surfactants 1,2,3-tri(2-oxypropyl sulfonation-3-alkylether-propoxyl) propanes (TTSS-n) and anion-nonionic surfactant NPSO [sodium nonyl phenol polyethyleneoxy ether sulfonate, (EO = 10)]. The critical micelle concentrations (CMCs) of five trimeric sulfonate surfactants were smaller than 400 mg L{sup -1}. Furthermore, their interfacial tensions (IFTs) could reach an ultralow value with Tazhong 4 oil at lower concentrations. Through optimized formulation, we found that TTSS-12 had better properties and was selected as the major component of the surfactant flooding system. We designed an optimal formulation of the surfactant flooding system with 1000 mg . L{sup -1} TTSS-12 and 1000 mg . L{sup -1} NPSO surfactant. The system with a very small surfactant concentration could reach ultralow IFT with Tazhong 4 crude oils at high temperature (110 C) and high concentration formation brine (112,228.8 mg/L TDS), which proved that the simpler component surfactant had better reservoir compatibility. NPSO could weaken the disadvantage of the surfactant TTSS-12 in oil/water interface. The stability of this surfactant flooding system was evaluated by aging time, static adsorption and chromatographic separation. All experiments showed that it still keeps ultralow IFT in high temperature and high salinity conditions. Coreflooding experimentation showed that average oil recovery reached 9.8 wt% by surfactant flooding, therefore, it is feasible to use as a surfactant flooding system for enhanced oil recovery (EOR). (orig.)

  2. Structural studies of lamellar surfactant systems under shear

    DEFF Research Database (Denmark)

    Mortensen, K.

    2001-01-01

    Recent experimental studies on concentrated surfactant systems are reviewed. Particular attention is focused on the transformation from planar lamellar sheets to multilamellar vesicles. It is discussed whether both of these states are thermodynamic stable, or if the MLV is an artifact of shear...... induced factors. Recent studies includes the dependence on shear, and dependence on salt and cosurfactants, and thereby related lamellar defects. The review include moreover the demonstration that polymeric amphiphiles dramatically enhance the quality of classical surfactants. (C) 2001 Elsevier Science...

  3. The Potential of The Synergy of Sunphotometer and Lidar Data to Validate Vertical Profiles of The Aerosol Mass Concentration Estimated by An Air Quality Model

    Directory of Open Access Journals (Sweden)

    Siomos N.

    2016-01-01

    Full Text Available Vertical profiles of the aerosol mass concentration derived by the Lidar/Radiometer Inversion Code (LIRIC, that uses combined sunphotometer and lidar data, were used in order to validate the aerosol mass concentration profiles estimated by the air quality model CAMx. Lidar and CIMEL measurements performed at the Laboratory of Atmospheric Physics of the Aristotle University of Thessaloniki, Greece (40.5N, 22.9E from the period 2013-2014 were used in this study.

  4. The Potential of The Synergy of Sunphotometer and Lidar Data to Validate Vertical Profiles of The Aerosol Mass Concentration Estimated by An Air Quality Model

    Science.gov (United States)

    Siomos, N.; Filioglou, M.; Poupkou, A.; Liora, N.; Dimopoulos, S.; Melas, D.; Chaikovsky, A.; Balis, D. S.

    2016-06-01

    Vertical profiles of the aerosol mass concentration derived by the Lidar/Radiometer Inversion Code (LIRIC), that uses combined sunphotometer and lidar data, were used in order to validate the aerosol mass concentration profiles estimated by the air quality model CAMx. Lidar and CIMEL measurements performed at the Laboratory of Atmospheric Physics of the Aristotle University of Thessaloniki, Greece (40.5N, 22.9E) from the period 2013-2014 were used in this study.

  5. 微电解法预处理高浓度阴离子表面活性剂废水%Pretreatment of wastewater containing highly concentrated anionic surfactant by micro-electrolysis

    Institute of Scientific and Technical Information of China (English)

    文善雄; 梁宝锋; 徐静; 荣树茂

    2011-01-01

    考察了不同微电解方式对含高浓度阴离子表面活性剂(AS)废水的预处理效果,结果表明,在铁炭填料分别为F3(铁屑,规格3 mm×10 mm)、C3(活性炭,规格D 2 mm×3 mm),进水pH为3.5,停留时间为30 min的相同条件下,当m(F3):m(C3)=2:1时,二元微电解法对废水AS及COD的平均去除率分别为51.32%、48.9%;当m(F3):m(Cu):m(C3)=60:60:40时,三元微电解法对废水AS及COD的平均去除率分别为54.14%、49.0%.从处理效果和实际工程应用综合考虑,选用二元微电解法预处理该废水.%The pretreatment effect of the wastewater containing highly concentrated anionic surfactant (AS) by different micro-electrolysis modes has been investigated. The results show that under the same conditions: the mass ratio of F3 (iron,size 3 mmxlO mm) and C3 (activated carbon,size D 2 mmx3 mm) is 2:1, pH 3.5 and retention time 30 min,the average removing rates of AS and COD are 51.32% and 48.9% Respectively by binary micro-electrolysis. When the mass ratio of F3、Cu and C3 is 60:60=40,the average removing rates of AS and COD are 54.14% and 49.0% Respectively by ternary micro-electrolysis. Out of consideration for the treatment effectiveness and actual application, the binary micro-electrolysis should be selected for the pretreatment of such wastewater.

  6. Rheological profiling of organogels prepared at critical gelling concentrations of natural waxes in a triacylglycerol solvent.

    Science.gov (United States)

    Patel, Ashok R; Babaahmadi, Mehrnoosh; Lesaffer, Ans; Dewettinck, Koen

    2015-05-20

    The aim of this study was to use a detailed rheological characterization to gain new insights into the gelation behavior of natural waxes. To make a comprehensive case, six natural waxes (differing in the relative proportion of chemical components: hydrocarbons, fatty alcohols, fatty acids, and wax esters) were selected as organogelators to gel high-oleic sunflower oil. Flow and dynamic rheological properties of organogels prepared at critical gelling concentrations (Cg) of waxes were studied and compared using drag (stress ramp and steady flow) and oscillatory shear (stress and frequency sweeps) tests. Although, none of the organogels satisfied the rheological definition of a "strong gel" (G″/G' (ω) ≤ 0.1), on comparing the samples, the strongest gel (highest critical stress and dynamic, apparent, and static yield stresses) was obtained not with wax containing the highest proportion of wax esters alone (sunflower wax, SFW) but with wax containing wax esters along with a higher proportion of fatty alcohols (carnauba wax, CRW) although at a comparatively higher Cg (4%wt for latter compared to 0.5%wt for former). As expected, gel formation by waxes containing a high proportion of lower melting fatty acids (berry, BW, and fruit wax, FW) required a comparatively higher Cg (6 and 7%wt, respectively), and in addition, these gels showed the lowest values for plateau elastic modulus (G'LVR) and a prominent crossover point at higher frequency. The gelation temperatures (TG'=G″) for all the studied gels were lower than room temperature, except for SFW and CRW. The yielding-type behavior of gels was evident, with most gels showing strong shear sensitivity and a weak thixotropic recovery. The rheological behavior was combined with the results of thermal analysis and microstructure studies (optical, polarized, and cryo-scanning electron microscopy) to explain the gelation properties of these waxes.

  7. Sea ice algae chlorophyll a concentrations derived from under-ice spectral radiation profiling platforms

    Science.gov (United States)

    Lange, Benjamin A.; Katlein, Christian; Nicolaus, Marcel; Peeken, Ilka; Flores, Hauke

    2016-12-01

    Multiscale sea ice algae observations are fundamentally important for projecting changes to sea ice ecosystems, as the physical environment continues to change. In this study, we developed upon previously established methodologies for deriving sea ice-algal chlorophyll a concentrations (chl a) from spectral radiation measurements, and applied these to larger-scale spectral surveys. We conducted four different under-ice spectral measurements: irradiance, radiance, transmittance, and transflectance, and applied three statistical approaches: Empirical Orthogonal Functions (EOF), Normalized Difference Indices (NDI), and multi-NDI. We developed models based on ice core chl a and coincident spectral irradiance/transmittance (N = 49) and radiance/transflectance (N = 50) measurements conducted during two cruises to the central Arctic Ocean in 2011 and 2012. These reference models were ranked based on two criteria: mean robustness R2 and true prediction error estimates. For estimating the biomass of a large-scale data set, the EOF approach performed better than the NDI, due to its ability to account for the high variability of environmental properties experienced over large areas. Based on robustness and true prediction error, the three most reliable models, EOF-transmittance, EOF-transflectance, and NDI-transmittance, were applied to two remotely operated vehicle (ROV) and two Surface and Under-Ice Trawl (SUIT) spectral radiation surveys. In these larger-scale chl a estimates, EOF-transmittance showed the best fit to ice core chl a. Application of our most reliable model, EOF-transmittance, to an 85 m horizontal ROV transect revealed large differences compared to published biomass estimates from the same site with important implications for projections of Arctic-wide ice-algal biomass and primary production.

  8. Studies on interfacial tension and contact angle of synthesized surfactant and polymeric from castor oil for enhanced oil recovery

    Science.gov (United States)

    Babu, Keshak; Pal, Nilanjan; Bera, Achinta; Saxena, V. K.; Mandal, Ajay

    2015-10-01

    New synthesized polymeric surfactants have immensely attracted the researchers for further development of chemical enhanced oil recovery method particularly in surfactant flooding. Contact angle and interfacial tension measurement tests are the effective ways to identify proper chemicals/surfactants for enhanced oil recovery by chemical/surfactant flooding. In the present study a new polymeric surfactant was synthesized from pre-synthesized sodium methyl ester sulfonate (surfactant) and acrylamide for application in chemical enhanced oil recovery. The synthesized surfactant and polymeric surfactant were used to measure interfacial tension between their aqueous phase and crude oil phase to investigate the efficiency of the surfactants in reduction of interfacial tension. The synthesized polymeric surfactant has also ability to control the mobility because of its viscous nature in aqueous solution. Contact angles of solid-crude oil-surfactant interface were also measured to study the effect of the synthesized surfactant and polymeric surfactant on wettability alteration mechanism. Synergistic effect was studied by using NaCl and synthesized surfactants on interfacial tension. Dynamic interfacial tensions of the surfactant and polymeric surfactant solutions with crude oil were measured at different NaCl concentrations. Interfacial tension was found to be lowered up to 10-2 to 10-3 mN/m which is effective for oil recovery. Measurement of contact angle indicates the wettability change of the quartz surface. Comparative studies on efficiencies of synthesized sodium methyl ester sulfonate surfactant and polymeric surfactant were also carried out with respect to interfacial tension reduction and contact angle change.

  9. Serum concentrations and profiles of polychlorinated biphenyls in Taiwan Yu-cheng victims twenty years after the incident

    Energy Technology Data Exchange (ETDEWEB)

    Lung, S.-C. Candice [Research Center for Environmental Changes, Academia Sinica, Nankang, Taipei, Taiwan 115 (China); Guo, Y.-L.L. [Department of Environmental and Occupational Health, College of Medicine, National Cheng Kung University, 138 Sheng-Li Rd., Tainan, Taiwan 70428 (China); Chang, H.-Y.[Department of Environmental and Occupational Health, College of Medicine, National Cheng Kung University, 138 Sheng-Li Rd., Tainan, Taiwan 70428 (China)]. E-mail: h7154@mail.ncku.edu.tw

    2005-07-15

    In 1979, about 2000 people in central Taiwan were intoxicated via rice oil consumption that was contaminated with polychlorinated biphenyls (PCBs). This 'Yu-cheng' incident was one of the two known major human PCB intoxication episodes. Twenty years after the intoxication, serum samples of 435 Yu-cheng victims, 414 adults and 21 children, were collected. Sixteen PCB congeners were analyzed with a gas chromatograph-electron capture detector. We found the median concentration of total PCBs in the adult serum was 1500 ng/g lipid, still substantially higher than that of the general population in Taiwan (3.7-fold) and most seafood consumers in the world. Most of analyzed PCB congeners in children were below or around the detection limits. Congener no. 138, however, had the highest concentrations, approximately accounting for 55% and 29% in the child and adult groups, respectively. Given that PCBs are persistent organic pollutants and endocrine disruptors, the concentrations and congener-specific profiles regarding the Yu-cheng victims provide valuable information for the investigation of such chemicals in humans. - Total serum PCBs in the Yu-cheng adult victims twenty years after the incident were still higher than that of the general population in Taiwan.

  10. The effect of surfactant on pollutant biosorption of Trametes versicolor

    Science.gov (United States)

    Gül, Ülküye Dudu; Silah, Hülya; Akbaş, Halide; Has, Merve

    2016-04-01

    The major problem concerning industrial wastewater is treatment of dye and heavy metal containing effluents. Industrial effluents are also contained surfactants that are used as levelling, dispersing and wetting agents. The purpose of this study was to investigate the effect of surfactant on textile dye biosorption properties of a white rot fungus named Trametes versicolor. Reactive dyes are commonly used in textile industry because of their advantages such as brightness and excellent color fastness. A recative textile dye, called Everzol Black, was used in this study. The low-cost mollasses medium is used for fungal growth. The usage of mollases, the sugar refinery effluent as a source of energy and nutrients, gained importance because of reducing the cost and also reusing another waste. In biosorption process the effect of surfactant on dye removal properties of T. versicolor was examined as a function of pH, dye consentration and surfactant concentration. The results of this study showed that the surfactant enhanced the dye removal capacity of Trametes versicolor. The dye and surfactant molecules were interacted electrostatically and these electrostatic interactions improved dye removal properties of filamentous fungus T. versicolor. The results of this study recommended the use of surfactants as an inducer in textile wastewater treatment technologies.

  11. Surfactant-laden drop jellyfish-breakup mode induced by the Marangoni effect

    Science.gov (United States)

    Zhao, Hui; Zhang, Wen-Bin; Xu, Jian-Liang; Li, Wei-Feng; Liu, Hai-Feng

    2017-03-01

    Drop breakup is a familiar event in both nature and technology. In this study, we find that the bag breakup mode can be replaced by a new breakup mode: jellyfish breakup, when the surfactant concentration of a surfactant-laden drop is high. This new breakup mode has a morphology resembling a jellyfish with many long tentacles. This is due to the inhomogeneous distribution of surfactant in the process of drop deformation and breakup. The thin film of liquid can remain stable as a result of the Marangoni effect. Finally, we propose that the dimensionless surfactant concentration can serve as a criterion for breakup mechanisms.

  12. MICROBIAL SURFACTANTS. I. GLYCOLIPIDS

    Directory of Open Access Journals (Sweden)

    Pirog T. Р.

    2014-02-01

    Full Text Available The review is devoted to surface-active glycolipids. The general characteristics, the physiological role of the rhamnolipids, trehalose lipids, sophorolipids, mannosylerythritol lipids and their traditional producers — the representatives of the genera Pseudozyma, Pseudomonas, Rhodococcus and Candida are given. The detailed analysis of the chemical structure, the stages of the biosynthesis and the regulation of some low molecular glycolipids are done. The own experimental data concerning the synthesis intensification, the physiological role and the practical use of Rhodococcus erythropolis IMV Ac-5017, Acinetobacter calcoaceticus IMV B-7241 and Nocardia vaccinii IMV B-7405 surfactants, which are a complex of the glyco-, phospho-, amino- and neutral lipids (glycolipids of all strains are presented by trehalose mycolates are summarized. It was found that R. erythropolis IMV Ac-5017, A. calcoaceticus IMV B-7241 and N. vaccinii IMV B-7405 surfactants have protective, antimicrobial and antiadhesive properties. It was shown that R. erythropolis IMV Ac-5017, A. calcoaceticus IMV B-7241 and N. vaccinii IMV B-7405 surfactants preparation of cultural liquid intensified the degradation of oil in water due to the activation of the natural petroleum-oxidizing microflora.

  13. Seasonal dynamics of soil CO2 efflux and soil profile CO2 concentrations in arboretum of Moscow botanical garden

    Science.gov (United States)

    Goncharova, Olga; Udovenko, Maria; Matyshak, Georgy

    2016-04-01

    To analyse and predict recent and future climate change on a global scale exchange processes of greenhouse gases - primarily carbon dioxide - over various ecosystems are of rising interest. In order to upscale land-use dependent sources and sinks of CO2, knowledge of the local variability of carbon fluxes is needed. Among terrestrial ecosystems, urban areas play an important role because most of anthropogenic emissions of carbon dioxide originate from these areas. On the other hand, urban soils have the potential to store large amounts of soil organic carbon and, thus, contribute to mitigating increases in atmospheric CO2 concentrations. Research objectives: 1) estimate the seasonal dynamics of carbon dioxide production (emission - closed chamber technique and profile concentration - soil air sampling tubes method) by soils of Moscow State University Botanical Garden Arboretum planted with Picea obovata and Pinus sylvestris, 1) identification the factors that control CO2 production. The study was conducted with 1-2 weeks intervals between October 2013 and November 2015 at two sites. Carbon dioxide soil surface efflux during the year ranged from 0 to 800 mgCO2/(m2hr). Efflux values above 0 mgCO2/(m2hr) was observed during the all cold period except for only 3 weeks. Soil CO2 concentration ranged from 1600-3000 ppm in upper 10-cm layer to 10000-40000 ppm at a depth of 60 cm. The maximum concentrations of CO2 were recorded in late winter and late summer. We associate it with high biological activity (both heterotrophic and autotrophic) during the summer, and with physical gas jamming in the winter. The high value of annual CO2 production of the studied soils is caused by high organic matter content, slightly alkaline reaction, good structure and texture of urban soils. Differences in soil CO2 production by spruce and pine urban forest soils (in the pine forest 1.5-2.0 times higher) are caused by urban soil profiles construction, but not temperature regimes. Seasonal

  14. Surfactants at the Design Limit.

    Science.gov (United States)

    Czajka, Adam; Hazell, Gavin; Eastoe, Julian

    2015-08-04

    This article analyzes how the individual structural elements of surfactant molecules affect surface properties, in particular, the point of reference defined by the limiting surface tension at the aqueous cmc, γcmc. Particular emphasis is given to how the chemical nature and structure of the hydrophobic tails influence γcmc. By comparing the three different classes of surfactants, fluorocarbon, silicone, and hydrocarbon, a generalized surface packing index is introduced which is independent of the chemical nature of the surfactants. This parameter ϕcmc represents the volume fraction of surfactant chain fragments in a surface film at the aqueous cmc. It is shown that ϕcmc is a useful index for understanding the limiting surface tension of surfactants and can be useful for designing new superefficient surfactants.

  15. Study of the interactions between lysozyme and a fully-fluorinated surfactant in aqueous solution at different surfactant-protein ratios.

    Science.gov (United States)

    Ruso, Juan M; González-Pérez, Alfredo; Prieto, Gerardo; Sarmiento, Félix

    2003-11-01

    The interactions of a fluorinated surfactant, sodium perfluorooctanoate, with lysozyme, have been investigated by a combination of UV absorbance, electrical conductivity and dynamic light scattering to detect and to characterize the conformational transitions of lysozyme. By using difference spectroscopy, the transition was followed as a function of surfactant concentration, and the data were analyzed to obtain the Gibbs energy of the transition in water (DeltaGw(o)) and in a hydrophobic environment (DeltaGh(o)) for saturated protein-surfactant complexes. Electrical conductivity was used to determine the critical micelle concentration of the surfactant in the presence of different lysozyme concentration. From these results, the average number of surfactant monomer per protein molecule was calculated. Finally, dynamic light scattering show that only changes in the secondary structure of the protein can be observed.

  16. Reversibly enhanced aqueous solubilization of volatile organic compounds using a redox-reversible surfactant

    Institute of Scientific and Technical Information of China (English)

    Yingjie Li; Senlin Tian; Hong Mo; Ping Ning

    2011-01-01

    Surfactant-enhanced remediation (SER) is an effective method for the removal of volatile organic compounds (VOCs) from contaminated soils and groundwater.To reuse the surfactant the VOCs must be separated from the surfactant solutions.The water solubility of VOCs can be enhanced using reversible surfactants with a redox-acive group,(ferrocenylmethyl)dodecyldimethylammonium bromide (Fc12) and (ferrocenylmethyl)tetradecanedimethylammonium bromide (Fc14),above and below their critical micelle concentrations (CMC) under reducing (I+) and oxidative (I2+) conditions.The CMC values of Fc12 and Fc14 in I+ are 0.94 and 0.56 mmol/L and the solubilization of toluene by Fc12 and Fc14 in I+ for toluene is higher than the solubilization achieved with sodium dodecyl sulfate,cetyltrimethylammonium bromide and Trition X-114.The solubilization capacity of the ferrocenyl surfactants for each tested VOCs ranked as follows:ethylbenzene > toluene > benzene.The solubilities of VOCs by reversible surfactant in I+ were 30% higher than those in 12+ at comparable surfactant concentrations.The effects of Fc14 concentrations on VOCs removal efficiency were as follows:benzene > toluene > ethylbenzene.However,an improved removal efficiency was achieved at low ferrocenyl surfactant concentrations.Furthermore,the reversible surfactant could be recycled through chemical approaches to remove organic pollutants,which could significantly reduce the operating costs of SER technology.

  17. Vesicle formation and stability in the surfactant sodium 4-(1'-heptylnonyl) benzenesulfonate

    Energy Technology Data Exchange (ETDEWEB)

    Franses, E.I.; Talmon, Y.; Scriven, L.E.; Davis, H.T.; Miller, W.G.

    1982-04-01

    Surfactants composed of a hydrophilic moiety covalently attached to the end of a hydrocarbon chain (e.g., sodium dodecyl sulfate), spontaneously form micelles, equilibrium aggregates, in solution if the surfactant concentration exceeds a critical value called the CMC. Naturally occurring double-tail surfactants (e.g., phospholipids) are not known to form micelles. Over a considerable range in surfactant concentration, 2 phases coexist in equilibrium: a hydrated, multilamellar (smectic) surfactant phase and an aqueous phase saturated with surfactant. In this report the preparation of vesicles, their direct, unstained visualization by electron microscopy, and investigation of their stability and structure by turbidimetry, conductimetry, light microscopy, densitometry, scanning calorimetry, and nuclear magnetic resonance spectroscopy are discussed. Dispersed liquid crystal was studied by the same means. For comparison, parallel studies on bovine lecithin are presented. From the results, it is concluded that these vesicles may be stable for many months, but eventually revert to multilamellar liquid crystals.

  18. Adsorption of surfactants and polymers at interfaces

    Science.gov (United States)

    Rojas, Orlando Jose

    Surface tension and high-resolution laser light scattering experiments were used to investigate the adsorption of isomeric sugar-based surfactants at the air/liquid interface in terms of surfactant surface packing and rheology. Soluble monolayers of submicellar surfactant solutions exhibited a relatively viscous behavior. It was also proved that light scattering of high-frequency thermally-induced capillary waves can be utilized to study surfactant exchange between the surface and the bulk solution. Such analysis revealed the existence of a diffusional relaxation mechanism. A procedure based on XPS was developed for quantification, on an absolute basis, of polymer adsorption on mica and Langmuir-Blodgett cellulose films. The adsorption of cationic polyelectrolytes on negatively-charged solid surfaces was highly dependent on the polymer ionicity. It was found that the adsorption process is driven by electrostatic mechanisms. Charge overcompensation (or charge reversal) of mica occurred after adsorption of polyelectrolytes of ca. 50% charge density, or higher. It was demonstrated that low-charge-density polyelectrolytes adsorb on solid surfaces with an extended configuration dominated by loops and tails. In this case the extent of adsorption is limited by steric constraints. The conformation of the polyelectrolyte in the adsorbed layer is dramatically affected by the presence of salts or surfactants in aqueous solution. The phenomena which occur upon increasing the ionic strength are consistent with the screening of the electrostatic attraction between polyelectrolyte segments and solid surface. This situation leads to polyelectrolyte desorption accompanied by both an increase in the layer thickness and the range of the steric force. Adsorbed polyelectrolytes and oppositely charged surfactants readily associate at the solid/liquid interface. Such association induces polyelectrolyte desorption at a surfactant concentration which depends on the polyelectrolyte charge

  19. Novel fluorinated gemini surfactants with γ-butyrolactone segments.

    Science.gov (United States)

    Kawase, Tokuzo; Okada, Kazuyuki; Oida, Tatsuo

    2015-01-01

    In this work, novel γ-butyrolactone-type monomeric and dimeric (gemini) surfactants with a semifluoroalkyl group [Rf- (CH2)3-; Rf = C4F9, C6F13, C8F17] as the hydrophobic group were successfully synthesized. Dimethyl malonate was dimerized or connected using Br(CH2)sBr (s = 0, 1, 2, 3) to give tetraesters, and they were bis-allylated. Radical addition of fluoroalkyl using Rf-I and an initiator, i.e., 2,2'-azobisisobutyronitrile for C4F9 or di-t-butyl peroxide for C6F13 and C8F17, was perform at high temperature, with prolonged heating, to obtain bis(semifluoroalkyl)-dilactone diesters. These dilactone diesters were hydrolyzed using KOH/EtOH followed by decarboxylation in AcOH to afford γ-butyrolactonetype gemini surfactants. Common 1 + 1 semifluoroalkyl lactone surfactants were synthesized using the same method. Their surfactant properties [critical micelle concentration (CMC), γCMC, pC20, ΓCMC, and AG] were investigated by measuring the surface tension of the γ-hydroxybutyrate form prepared in aqueous tetrabutylammonium hydroxide solution. As expected, the CMC values of the gemini surfactants were more than one order of magnitude smaller than those of the corresponding 1 + 1 surfactants. Other properties also showed the excellent ability of the gemini structure to reduce the surface tension. These surfactants were easily and quantitatively recovered by acidification. The monomeric surfactant was recovered in the γ-hydroxybutyric acid form, and the gemini surfactant as a mixture of γ-butyrolactone and γ-hydroxybutyric acid forms.

  20. Adsorption of anionic and non-ionic surfactants on carbon nanotubes in water with dissipative particle dynamics simulation.

    Science.gov (United States)

    Vo, Minh D; Shiau, Benjamin; Harwell, Jeffrey H; Papavassiliou, Dimitrios V

    2016-05-28

    The morphology of surfactants physically adsorbed on the surface of carbon nanotubes (CNTs) has a significant impact on the dispersion of CNTs in the solution. The adsorption of the surfactants alfoterra 123-8s (AF) and tergitol 15-s-40 (TG) on CNTs was investigated with dissipative particle dynamics (DPD) simulations, as well as the behavior of the binary surfactant system with CNTs. Properties of surfactants (i.e., critical micelle concentration, aggregation number, shape and size of micelle, and diffusivity) in water were determined to validate the simulation model. Results indicated that the assembly of surfactants (AF and TG) on CNTs depends on the interaction of the surfactant tail and the CNT surface, where surfactants formed mainly hemimicellar structures. For surfactants in solution, most micelles had spherical shape. The particles formed by the CNT and the adsorbed surfactant became hydrophilic, due to the outward orientation of the head groups of the surfactants that formed monolayer adsorption. In the binary surfactant system, the presence of TG on the CNT surface provided a considerable hydrophilic steric effect, due to the EO groups of TG molecules. It was also seen that the adsorption of AF was more favorable than TG on the CNT surface. Diffusion coefficients for the surfactants in the bulk and surface diffusion on the CNT were calculated. These results are applicable, in a qualitative sense, to the more general case of adsorption of surfactants on the hydrophobic surface of cylindrically shaped nanoscale objects.

  1. Adsorption of anionic and non-ionic surfactants on carbon nanotubes in water with dissipative particle dynamics simulation

    Science.gov (United States)

    Vo, Minh D.; Shiau, Benjamin; Harwell, Jeffrey H.; Papavassiliou, Dimitrios V.

    2016-05-01

    The morphology of surfactants physically adsorbed on the surface of carbon nanotubes (CNTs) has a significant impact on the dispersion of CNTs in the solution. The adsorption of the surfactants alfoterra 123-8s (AF) and tergitol 15-s-40 (TG) on CNTs was investigated with dissipative particle dynamics (DPD) simulations, as well as the behavior of the binary surfactant system with CNTs. Properties of surfactants (i.e., critical micelle concentration, aggregation number, shape and size of micelle, and diffusivity) in water were determined to validate the simulation model. Results indicated that the assembly of surfactants (AF and TG) on CNTs depends on the interaction of the surfactant tail and the CNT surface, where surfactants formed mainly hemimicellar structures. For surfactants in solution, most micelles had spherical shape. The particles formed by the CNT and the adsorbed surfactant became hydrophilic, due to the outward orientation of the head groups of the surfactants that formed monolayer adsorption. In the binary surfactant system, the presence of TG on the CNT surface provided a considerable hydrophilic steric effect, due to the EO groups of TG molecules. It was also seen that the adsorption of AF was more favorable than TG on the CNT surface. Diffusion coefficients for the surfactants in the bulk and surface diffusion on the CNT were calculated. These results are applicable, in a qualitative sense, to the more general case of adsorption of surfactants on the hydrophobic surface of cylindrically shaped nanoscale objects.

  2. A comparative study of glycoprotein concentration, glycoform profile and glycosylation site occupancy using isotope labeling and electrospray linear ion trap mass spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Chih-Yu; Ma, Yi-Chun; Pai, Pei-Jing [Department of Chemistry, National Taiwan University, No.1, Sec. 4, Roosevelt Rd., Taipei 10617, Taiwan (China); Her, Guor-Rong, E-mail: grher@ntu.edu.tw [Department of Chemistry, National Taiwan University, No.1, Sec. 4, Roosevelt Rd., Taipei 10617, Taiwan (China)

    2012-05-30

    Highlights: Black-Right-Pointing-Pointer Concentration, site occupancy and glycoform variation can be differentiated. Black-Right-Pointing-Pointer Glycopeptides and peptides were stable isotope labeled and analyzed by ESI-MS. Black-Right-Pointing-Pointer Nonglycosylated peptide provided glycoprotein concentration variation. Black-Right-Pointing-Pointer Glycoform variation was obtained by comparing d{sub 0} and d{sub 4} labeled glycopeptides. Black-Right-Pointing-Pointer The variation of glycosylation site occupancy could be calculated. - Abstract: A strategy is presented for comparative analysis of glycoproteins in which the variation of protein concentration, variation of glycosylation site occupancy and variation of glycoform profile can be determined. A comparative study was performed using stable isotope labeling of glycopeptides and peptides by formaldehyde-H{sub 2} and formaldehyde-D{sub 2} and analysis by ESI-MS analysis. The relative intensity of the nonglycosylated peptide provided information about protein concentration variation. Variation of the glycoform profile was obtained by comparing the glycoform profile of d{sub 0}- and d{sub 4}-dimethyl labeled glycopeptides. By knowing the variation of protein concentration and the variation of glycoform profile, the variation of glycosylation site occupancy could be calculated. The utility of the proposed strategy was demonstrated with ribonuclease B with different protein concentrations, different levels of glycosylation site occupancy and different glycoform profiles.

  3. Polydiacetylene sensor interaction with food sanitizers and surfactants.

    Science.gov (United States)

    Zhang, Yueyuan; Northcutt, Julie; Hanks, Tim; Miller, Ian; Pennington, Bill; Jelinek, Raz; Han, Inyee; Dawson, Paul

    2017-04-15

    Polydiacetylene (PDA) vesicles are of interest as biosensors, particularly for pathogenic bacteria. As part of a food monitoring system, interaction with food sanitizers/surfactants was investigated. PDA vesicles were prepared by inkjet-printing, photopolymerized and characterized by dynamic light scattering (DLS) and UV/Vis spectroscopy. The optical response of PDA vesicles at various concentrations verses a fixed sanitizer/surfactant concentration was determined using a two variable factorial design. Sanitizer/surfactant response at various concentrations over time was also measured. Results indicated that only Vigilquat and TritonX-100 interacted with PDA vesicles giving visible colour change out of 8 sanitizers/surfactants tested. PDA vesicle concentration, sanitizer/surfactant concentration, and time all had a significant (P<0.0001) effect on colour change. As they are highly sensitive to the presence of Vigilquat and TritonX-100, PDA sensors could be used to detect chemical residues as well as for detection of various contaminants in the food industry.

  4. Experimental study on thermophoresis of colloids in aqueous surfactant solutions

    Science.gov (United States)

    Dong, Ruo-Yu; Zhou, Yi; Yang, Chun; Cao, Bing-Yang

    2015-12-01

    Thermophoresis refers to the motion of particles under a temperature gradient and it is one of the particle manipulation techniques. Regarding the thermophoresis of particles in liquid media, however, many open questions still remain, especially the role of the interfacial effect. This work reports on a systematic experimental investigation of surfactant effects, especially the induced interfacial effect, on the thermophoresis of colloids in aqueous solutions via a microfluidic approach. Two kinds of commonly used surfactants, sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB), are selected and the results show that from relatively large concentrations, the two surfactants can greatly enhance the thermophilic mobilities. Specifically, it is found that the colloid-water interfaces modified with more polar end groups can potentially lead to a stronger thermophilic tendency. Due to the complex effects of surfactants, further theoretical model development is needed to quantitatively describe the dependence of thermophoresis on the interface characteristics.

  5. Serum Adiponectin and Leptin Concentrations in Relation to Body Fat Distribution, Hematological Indices and Lipid Profile in Humans

    Directory of Open Access Journals (Sweden)

    Anna Lubkowska

    2015-09-01

    Full Text Available The purpose of the study was to evaluate the relationship between serum adiponectin and leptin concentrations and body composition, hematological indices and lipid profile parameters in adults. The study involved 95 volunteers (BMI from 23.3 to 53 kg/m2. Anthropometric parameters were measured: body weight and height, waist and hip circumference, waist-to-hip ratio, body fat mass (BMF, subcutaneous and visceral fat mass (SFM, VFM, lean body mass (LBM, skeletal muscle mass (SMM. In serum we determined adiponectin and leptin concentrations, extracellular hemoglobin, total bilirubin, as well as lipid metabolism (TCh, HDL-Ch, LDL-Ch, TG. Mean adipokine levels were significantly higher in women (p ≤ 0.01, adiponectin significantly negatively correlated with body height and weight, systolic blood pressure and absolute LBM and SMM values. The same relation was observed for erythroid system indicators and lipid indicators. A positive correlation was exceptionally found between adiponectin and HDL-Ch. LEP negatively correlated with some percentage rates (%LBM, %SMM. Only in women, we observed a positive correlation between LEP and body weight, BMI and WHR. Studies on ADPN and the ADPN/LEP ratio as a valuable complementary diagnostic element in the prediction and prevention of cardiovascular diseases need to be continued.

  6. Serum Adiponectin and Leptin Concentrations in Relation to Body Fat Distribution, Hematological Indices and Lipid Profile in Humans.

    Science.gov (United States)

    Lubkowska, Anna; Radecka, Aleksandra; Bryczkowska, Iwona; Rotter, Iwona; Laszczyńska, Maria; Dudzińska, Wioleta

    2015-09-14

    The purpose of the study was to evaluate the relationship between serum adiponectin and leptin concentrations and body composition, hematological indices and lipid profile parameters in adults. The study involved 95 volunteers (BMI from 23.3 to 53 kg/m²). Anthropometric parameters were measured: body weight and height, waist and hip circumference, waist-to-hip ratio, body fat mass (BMF), subcutaneous and visceral fat mass (SFM, VFM), lean body mass (LBM), skeletal muscle mass (SMM). In serum we determined adiponectin and leptin concentrations, extracellular hemoglobin, total bilirubin, as well as lipid metabolism (TCh, HDL-Ch, LDL-Ch, TG). Mean adipokine levels were significantly higher in women (p ≤ 0.01), adiponectin significantly negatively correlated with body height and weight, systolic blood pressure and absolute LBM and SMM values. The same relation was observed for erythroid system indicators and lipid indicators. A positive correlation was exceptionally found between adiponectin and HDL-Ch. LEP negatively correlated with some percentage rates (%LBM, %SMM). Only in women, we observed a positive correlation between LEP and body weight, BMI and WHR. Studies on ADPN and the ADPN/LEP ratio as a valuable complementary diagnostic element in the prediction and prevention of cardiovascular diseases need to be continued.

  7. Degradation of polycyclic aromatic hydrocarbons in the presence of synthetic surfactants.

    OpenAIRE

    Tiehm, A

    1994-01-01

    The biodegradation of polycyclic aromatic hydrocarbons (PAH) often is limited by low water solubility and dissolution rate. Nonionic surfactants and sodium dodecyl sulfate increased the concentration of PAH in the water phase because of solubilization. The degradation of PAH was inhibited by sodium dodecyl sulfate because this surfactant was preferred as a growth substrate. Growth of mixed cultures with phenanthrene and fluoranthene solubilized by a nonionic surfactant prior to inoculation wa...

  8. Effect of Dynamic Surface Tension on Droplet Formation of Surfactant Solution Injected from a Capillary Tube

    OpenAIRE

    山本, 剛宏; 加藤, 有樹; 山下, 敦史; Takehiro, YAMAMOTO; Yuki, Kato; Atsushi, Yamashita; 阪大院工; Osaka University

    2008-01-01

    Effects of dynamic surface tension on the droplet formation of surfactant solutions were studied. Aqueous solutions of CTAB at several surfactant concentrations were used as test fluids. A droplet formed when a surfactant solution was injected from a capillary tube was investigated and the relation between the droplet diameter and the injection velocity was measured. The diameter increased with increasing the velocity at relatively low velocities because the dynamic tension also increased. Ho...

  9. Capillary electrophoresis investigation on equilibrium between polymer-related and surfactant-related species in aqueous polymer-surfactant solutions.

    Science.gov (United States)

    Wu, Yefan; Chen, Miaomiao; Fang, Yun; Zhu, Meng

    2017-03-17

    It was inferred from aqueous solution behavior of nonionic polymers and anionic surfactants that the formation of charged polymer-bound surfactant micelle above critical aggregation concentration (cac) and the formation of free surfactant micelle beyond polymer saturation point (psp), but there was still a lack of direct experimental evidence for the considered equilibrium chemical species. Three modes of capillary electrophoresis are applied in this paper to study the complexation between nonionic polymers, polyvinylpyrrolidone (PVP) or polyethylene glycol (PEG), and sodium dodecylbenzenesulfonate (SDBS) by successfully distinguishing the imaginary charged polymer-bound SDBS micelle from nonionic polymer and SDBS molecule. Perhaps even more important, it is the action of SDBS as both a main surfactant and a UV probe that makes the free surfactant micelle emerged in electropherogram beyond psp, and thus makes it possible for the first time to provide the equilibrium relationship of the polymer-related and the surfactant-related species in the concentration regions divided into by cac and psp. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Selective Antimicrobial Activities and Action Mechanism of Micelles Self-Assembled by Cationic Oligomeric Surfactants.

    Science.gov (United States)

    Zhou, Chengcheng; Wang, Fengyan; Chen, Hui; Li, Meng; Qiao, Fulin; Liu, Zhang; Hou, Yanbo; Wu, Chunxian; Fan, Yaxun; Liu, Libing; Wang, Shu; Wang, Yilin

    2016-02-17

    This work reports that cationic micelles formed by cationic trimeric, tetrameric, and hexameric surfactants bearing amide moieties in spacers can efficiently kill Gram-negative E. coli with a very low minimum inhibitory concentration (1.70-0.93 μM), and do not cause obvious toxicity to mammalian cells at the concentrations used. With the increase of the oligomerization degree, the antibacterial activity of the oligomeric surfactants increases, i.e., hexameric surfactant > tetrameric surfactant > trimeric surfactant. Isothermal titration microcalorimetry, scanning electron microscopy, and zeta potential results reveal that the cationic micelles interact with the cell membrane of E. coli through two processes. First, the integrity of outer membrane of E. coli is disrupted by the electrostatic interaction of the cationic ammonium groups of the surfactants with anionic groups of E. coli, resulting in loss of the barrier function of the outer membrane. The inner membrane then is disintegrated by the hydrophobic interaction of the surfactant hydrocarbon chains with the hydrophobic domains of the inner membrane, leading to the cytoplast leakage. The formation of micelles of these cationic oligomeric surfactants at very low concentration enables more efficient interaction with bacterial cell membrane, which endows the oligomeric surfactants with high antibacterial activity.

  11. Comparison of concentrations of two proteinase inhibitors, porcine pancreatic elastase inhibitory capacity, and cell profiles in sequential bronchoalveolar lavage samples.

    Science.gov (United States)

    Morrison, H M; Kramps, J A; Dijkman, J H; Stockley, R A

    1986-06-01

    Bronchoalveolar lavage is used to obtain cells and proteins from the lower respiratory tract for diagnosis and research. Uncertainity exists about which site in the lung is sampled by the lavage fluid and what effect different lavage volumes have on recovery of the constituents of lavage fluid. Dilution of alveolar lining fluid by lavage fluid is variable and results are usually expressed as protein ratios to surmount this problem. We have compared cell profiles and the concentrations of two proteinase inhibitors--the low molecular weight bronchial protease inhibitor antileucoprotease and alpha 1 proteinase inhibitor, together with alpha 1 proteinase inhibitor function and its relationship to the cell profile in sequential bronchoalveolar lavage fluid samples from patients undergoing bronchoscopy. There was no difference in total or differential cell counts or albumin or alpha 1 proteinase inhibitor concentrations between the first and second halves of the lavage. Both the concentration of antileucoprotease and the ratio of antileucoprotease to albumin were, however, lower in the second half of the lavage (2p less than 0.01 and 2p less than 0.05 respectively). There was no difference in the function of alpha 1 proteinase inhibitor (assessed by inhibition of porcine pancreatic elastase--PPE) between aliquots (0.28 mole PPE inhibited/mol alpha 1 proteinase inhibitor; range 0-1.19 for the first half and 0.37 mol PPE inhibited/mol alpha 1 proteinase inhibitor; range 0.10-0.80 for the second half). About 60-70% of alpha 1 proteinase inhibitor in each half of the lavage fluid was inactive as an inhibitor. The function of alpha 1 proteinase inhibitor did not differ between bronchitic smokers and ex-smokers. Alpha 1 proteinase inhibitor function was not related to the number of total white cells, macrophages, or neutrophils in the lavage fluid. Contamination of lavage by red blood cells was found to alter the concentration of alpha 1 proteinase inhibitor but not its

  12. Depth profiling of strain and carrier concentration by cleaved surface scanning of GaN Gunn-diode: confocal Raman microscopy

    Science.gov (United States)

    Belyaev, A. E.; Strelchuk, V. V.; Nikolenko, A. S.; Romanyuk, A. S.; Mazur, Yu I.; Ware, M. E.; DeCuir, E. A., Jr.; Salamo, G. J.

    2013-10-01

    Confocal micro-Raman spectroscopy was applied to study the cleaved surface of vertical GaN Gunn-diode structure grown by molecular-beam epitaxy. The analysis of lateral scanning along the cleaved edge reveals the depth profile of elastic strain, quality of the crystal structure, and the concentration of charge carriers. Results are compared with that of axial confocal Raman depth profiling normal to the structure's surface. Decrease of compressive strain near the cleaved edge in the direction from the substrate to the structure's surface and in the growth plane towards the cleaved edge is shown. The decrease in charge carrier concentration in the undoped n0-GaN channel region in comparison with the n+-GaN contact region is identified. Peculiarities of the resulting spatial profiles of free charge carriers and their correlation with the initial doping profile are discussed.

  13. Computational modeling of unsteady surfactant-laden liquid plug propagation in neonatal airways

    Science.gov (United States)

    Olgac, Ufuk; Muradoglu, Metin

    2013-07-01

    Surfactant-free and surfactant-laden liquid plug propagation in neonatal airways in various generations representing the upper and lower airways are investigated computationally using a finite-difference/front-tracking method. Emphasis is placed on the unsteady surfactant-laden plug propagation as a model for Surfactant Replacement Therapy (SRT) and airway reopening. The numerical method is designed to solve the evolution equations of the interfacial and bulk surfactant concentrations coupled with the incompressible Navier-Stokes equations. Available experimental data for surfactant Survanta are used to relate surface tension coefficient to surfactant concentration at the interface. It is found that, for the surfactant-free case, the trailing film thickness is in good agreement with Taylor's law for plugs with plug length greater than the airway width. Mechanical stresses that could be injurious to epithelial cells such as pressure and shear stress and their gradients are maximized on the front and rear menisci with increasing magnitudes in the lower generations. These mechanical stresses, especially pressure and pressure gradient, are diminished with the introduction of surfactants. Surfactant is absorbed onto the trailing film and thickens it, eventually leading to either plug rupture or, if totally consumed prior to rupture, to steadily propagating plug. In the upper airways, initially small plugs rupture rapidly and plugs with comparable initial plug length with the airway width persist and propagate steadily. For a more effective SRT treatment, we recommend utilization of plugs with initial plug length greater than the airway width. Increasing surfactant strength or increasing the initially instilled surfactant concentration is found to be ineffective.

  14. ADSORPTION OF SURFACTANT ON CLAYS

    Science.gov (United States)

    Surfactants used to enhance remediation of soils by soil washing are often lost in the process. Neither the amount nor the cause of this loss is known. It is assumed that clays present in the soil are responsible for the loss of the surfactant. In this papere, adsorption prope...

  15. Surfactant adsorption kinetics in microfluidics

    Science.gov (United States)

    Riechers, Birte; Maes, Florine; Akoury, Elias; Semin, Benoît; Gruner, Philipp; Baret, Jean-Christophe

    2016-10-01

    Emulsions are metastable dispersions. Their lifetimes are directly related to the dynamics of surfactants. We design a microfluidic method to measure the kinetics of adsorption of surfactants to the droplet interface, a key process involved in foaming, emulsification, and droplet coarsening. The method is based on the pH decay in the droplet as a direct measurement of the adsorption of a carboxylic acid surfactant to the interface. From the kinetic measurement of the bulk equilibration of the pH, we fully determine the adsorption process of the surfactant. The small droplet size and the convection during the droplet flow ensure that the transport of surfactant through the bulk is not limiting the kinetics of adsorption. To validate our measurements, we show that the adsorption process determines the timescale required to stabilize droplets against coalescence, and we show that the interface should be covered at more than 90% to prevent coalescence. We therefore quantitatively link the process of adsorption/desorption, the stabilization of emulsions, and the kinetics of solute partitioning—here through ion exchange—unraveling the timescales governing these processes. Our method can be further generalized to other surfactants, including nonionic surfactants, by making use of fluorophore-surfactant interactions.

  16. Monsoon influences distribution of surfactants at different coastal areas into atmospheric aerosol

    Science.gov (United States)

    Shaharom, Suhana; Latif, Mohd Talib; Khan, Md Firoz

    2016-11-01

    Global climate change can be influenced by surfactants because of its characteristics due to reduce surface tension. The aim of this study was to determine the composition of surfactants in atmospheric aerosol. Fine aerosol sample diameter size (<1.5 µM) were collected using High Volume Air Sampler (HVAS) for 24 hrs with flow rate of 1.13m3min-1 at different coastal areas. Colorimetric method was undertaken to determine the concentrations of anionic surfactants as methylene blue active substances (MBAS) and cationic surfactants as dimethyl blue active substances (DBAS) using a UV spectrometer. The results indicated that the concentration of anionic surfactants was higher than concentration of cationic surfactants. Therefore, the concentrations of surfactants in Port Dickson was 103.97 pmolm-3 for MBAS and 62.57 pmolm-3 for DBAS and was higher than Bachok during southwest monsoon and meanwhile concentrations of surfactants was higher in Bachok 102.74 pmolm-3 for MBAS and DBAS 68.56 pmolm-3 during northeast monsoon.

  17. Anaerobic digestion of aircraft deicing fluid wastes: interactions and toxicity of corrosion inhibitors and surfactants.

    Science.gov (United States)

    Gruden, Cyndee L; Hernandez, Mark

    2002-01-01

    Corrosion inhibitors and surfactants are present in aircraft deicing fluids (ADFs) at significant concentrations (> 1% w/w). The purpose of this research was to study the interactions of a common nonionic surfactant with the commercially significant corrosion inhibitors used in modern ADF (4- and 5-methylbenzotriazole [MeBT]), and to determine the effects of their mixture on the conventional anaerobic digestion process. In mesophilic anaerobic microcosms codigesting wastewater solids, propylene glycol, and MeBT, increasing surfactant levels resulted in enhanced MeBT sorption on digester solids. As judged by anaerobic toxicity assays, responses from digesters containing surfactant concentrations below their critical micelle concentration (CMC) suggested that low nonionic surfactant concentrations could facilitate a reduction in the apparent toxicity of MeBT. In microcosms exposed to surfactant concentrations above their CMC, no increase in MeBT solubility was observed, and the anaerobic toxicity response corresponded to control systems not containing surfactant. Direct microscopic measurements of digesting biomass using fluorescent phylogenetic probes (fluorescent in situ hybridization) revealed that members of the domain Bacteria were more sensitive to MeBT in the presence of surfactant than were members of the domain Archaea.

  18. The Krafft temperature of surfactant solutions

    Directory of Open Access Journals (Sweden)

    Manojlović Jelena Ž.

    2012-01-01

    Full Text Available Our main motivation to revisit the solution properties of cetyltrimethylammonium bromide is related to the clear requirement for better control of the adsorption parameters to form uniform self-assembled monolayers on muscovite mica substrates. To readily monitor the temporal evolution of structural details in cetyltrimethylammonium bromide solutions, we realized a rather simple conductivity experiment. Conductivity measurements were carried out as a function of temperature, to look closer into the Krafft temperature behavior of this surfactant. We measured the electrical conductivity of different concentrations of aqueous cetyltrimethylammonium bromide solutions, below and above the critical micells concentration.

  19. Growth Mechanism of Gold Nanorods in Binary Surfactant System

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Bo-Mi; Seo, Sun-Hwa; Joe, Ara; Shim, Kyu-Dong; Jang, Eue-Soon [Kumoh National Institute of Technology, Gumi (Korea, Republic of)

    2016-06-15

    In order to reveal the growth mechanism of gold nanorods (GNRs) in a binary surfactant system, we synthesized various GNRs by changing the concentration of the surfactants, AgNO{sub 3}, and HBr in the growth solution. We found that the benzyldime thylhexadecylammoniumchloride surfactant had weak interaction with the gold ions, but it could reduce the membrane fluidity. In addition, we could dramatically decrease the cetyltrimethylammonium bromide concentration required for GNR growth by adding an HBr solution. Notably, Ag{sup +} ions were necessary to break the symmetry of the seed crystals for GNR growth, but increasing the concentration of Ag{sup +} and Br{sup -} ions caused a decrease in the template size.

  20. Surfactants enhance recovery of poorly soluble drugs during microdialysis sampling

    DEFF Research Database (Denmark)

    Koplin, Sebastian; Kumpugdee-Vollrath, Mont; Bauer-Brandl, Annette

    2017-01-01

    Aim of this project was to investigate the applicability of a recently developed in vitro microdialysis-sampling approach in connection with a dissolution-/permeation (D/P) system, especially the impact of surfactants within the perfusion fluid. The D/P-system is based on side-by-side chambers...... drug-dissolution (-release) and drug permeation. Furthermore, it should allow quantification of the unbound (free) drug concentration. In the first step, it was assessed, if the addition of the anionic surfactant sodium dodecyl sulphate (SDS) to the perfusate of the microdialysis system affects...... celecoxib, i.e. the fraction of drug, which is not associated with taurocholate surfactant micelles. In buffer, the measured concentrations matched the overall CXB concentrations. By the use of SDS-containing perfusates microdialysis sampling enabled reliable quantification of minute amounts of free CXB...

  1. Electrophoretic separations in poly(dimethylsiloxane) microchips using mixtures of ionic, nonionic and zwitterionic surfactants.

    Science.gov (United States)

    Guan, Qian; Noblitt, Scott D; Henry, Charles S

    2012-09-01

    The use of surfactant mixtures to affect both EOF and separation selectivity in electrophoresis with PDMS substrates is reported, and capacitively coupled contactless conductivity detection is introduced for EOF measurement on PDMS microchips. First, the EOF was measured for two nonionic surfactants (Tween 20 and Triton X-100), mixed ionic/nonionic surfactant systems (SDS/Tween 20 and SDS/Triton X-100), and finally for the first time, mixed zwitterionic/nonionic surfactant systems (TDAPS/Tween 20 and TDAPS/Triton X-100). EOF for the nonionic surfactants decreased with increasing surfactant concentration. The addition of SDS or TDAPS to a nonionic surfactant increased EOF. After establishing the EOF behavior, the separation of model catecholamines was explored to show the impact on separations. Similar analyte resolution with greater peak heights was achieved with mixed surfactant systems containing Tween 20 and TDAPS relative to the single surfactant system. Finally, the detection of catecholamine release from PC12 cells by stimulation with 80 mM K(+) was performed to demonstrate the usefulness of mixed surfactant systems to provide resolution of biological compounds in complex samples.

  2. Peat porewater chloride concentration profiles in the Everglades during wet/dry cycles from January 1996 to June 1998: Field measurements and theoretical analysis

    Science.gov (United States)

    Reddy, M.M.; Reddy, M.B.; Kipp, K.L.; Burman, A.; Schuster, P.; Rawlik, P.S.

    2008-01-01

    Water quality is a key aspect of the Everglades Restoration Project, the largest water reclamation and ecosystem management project proposed in the United States. Movement of nutrients and contaminants to and from Everglades peat porewater could have important consequences for Everglades water quality and ecosystem restoration activities. In a study of Everglades porewater, we observed complex, seasonally variable peat porewater chloride concentration profiles at several locations. Analyses and interpretation of these changing peat porewater chloride concentration profiles identifies processes controlling conservative solute movement at the peat-surface water interface, that is, solutes whose transport is minimally affected by chemical and biological reactions. We examine, with an advection-diffusion model, how alternating wet and dry climatic conditions in the Florida Everglades mediate movement of chloride between peat porewater and marsh surface water. Changing surface water-chloride concentrations alter gradients at the interface between peat and overlying water and hence alter chloride flux across that interface. Surface water chloride concentrations at two frequently monitored sites vary with marsh water depth, and a transfer function was developed to describe daily marsh surface water chloride concentration as a function of marsh water depth. Model results demonstrate that porewater chloride concentrations are driven by changing surface water chloride concentrations, and a sensitivity analysis suggests that inclusion of advective transport in the model improves the agreement between the calculated and the observed chloride concentration profiles. Copyright ?? 2007 John Wiley & Sons, Ltd.

  3. Interaction between cationic surfactant of 1-methyl-3-tetradecylimidazolium bromide and anionic polymer of sodium polystyrene sulfonate

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Qian [College of Chemistry and Chemical Engineering, Liaocheng University, Shandong Province, VIC 252059 (China); School of Chemistry and Chemical Engineering, Engineering Research Center for Fine Chemicals of Ministry of Education, Shanxi University, Shanxi Province, VIC 030006 (China); Kang, Wenpei [Key Laboratory of Colloid and Interface Chemistry, Shandong University, Ministry of Education, Shandong Province, VIC 250100 (China); Sun, Dezhi [College of Chemistry and Chemical Engineering, Liaocheng University, Shandong Province, VIC 252059 (China); Liu, Jie, E-mail: liujie@lcu.edu.cn [College of Chemistry and Chemical Engineering, Liaocheng University, Shandong Province, VIC 252059 (China); Wei, Xilian, E-mail: weixilian@126.com [College of Chemistry and Chemical Engineering, Liaocheng University, Shandong Province, VIC 252059 (China)

    2013-08-15

    The interaction between long-chain imidazolium ionic liquid (C{sub 14}mimBr) and anionic polyelectrolyte of sodium polystyrene sulfonate (NaPSS) has been studied using surface tension, isothermal titration microcalorimetry (ITC), dynamic light scatting (DLS) and conductance methods. The result shows that the surface tension plots have a pronounced hump in the surface tension at surfactant concentrations below the critical micelle concentration (cmc) of the surfactant. The cooperative adsorption of surfactant and polymer on the surface (PS{sub S}) and the formation of polymer/surfactant aggregate in bulk solution (PS{sub M}) provide a rational explanation about it. The formation of surfactant/polymer complexes is affected by the concentration of the surfactant or NaPSS, which is also ascertained by ITC and DLS measurements. Further, the thermodynamic parameters are derived from calorimetric titration and conductance curves, and the effects of polymer concentration and temperature on the parameters are evaluated in detail.

  4. Effect of curcumin on the binding of cationic, anionic and nonionic surfactants with myoglobin

    Science.gov (United States)

    Mondal, Satyajit; Ghosh, Soumen

    2017-04-01

    Interaction of a globular protein, myoglobin and different surfactants has been studied in the absence and presence of curcumin in phosphate buffer at pH = 7.4 by UV-VIS spectrophotometry, fluorimetry and fluorescence polarization anisotropy methods. Results show that heme environment of myoglobin is changed by cationic cetyltrimethylammonium bromide (CTAB) and sodium N-dodecanoyl sarcosinate (SDDS). In the presence of curcumin, CTAB cannot change the heme; but SDDS can make change. Nonionic surfactant N-decanoyl-N-methylglucamine (Mega 10) cannot change the heme environment. Protein is unfolded by the surfactant. Curcumin can prevent the unfolding of protein in the low concentration region of ionic surfactants such as CTAB and SDDS. In nonionic surfactant media, curcumin accelerates the denaturation process. Due to myoglobin-curcumin complex formation, rotational motion of curcumin decreases in surfactant media and so anisotropy increases.

  5. Evaluation of surfactants as solubilizing agents in microsomal metabolism reactions with lipophilic substrates.

    Science.gov (United States)

    Randall, Kathleen; Cheng, Shun Wen; Kotchevar, Anne Therese

    2011-10-01

    Solubilizing agents are routinely added when investigating the biotransformation of lipophilic substrates using hepatic microsomes. For highly lipophilic compounds, the concentration of solvent or surfactant necessary for dissolution can be detrimental to enzyme activity. This study evaluates the effect of 12 surfactants on microsomal metabolism and the ability of the same surfactants to improve the aqueous solubility of the pentabrominated diphenyl ether BDE-100, a lipophilic environmental contaminant previously found to be recalcitrant to in vitro metabolism. Of the surfactants investigated, Cremophor EL and Tween 80 displayed the best combination of increased BDE-100 solubility and minimal inhibition of microsomal metabolism. However, a comparison of the in vitro metabolism products of BDE-100 in the presence of the two surfactants revealed varying amounts of metabolites depending on the surfactant used.

  6. Solution behaviour of new cationic surfactants derived from Guerbet alcohols and their use in hair conditioners.

    Science.gov (United States)

    Yahagi, K; Hoshino, N; Hirota, H

    1991-10-01

    Summary The solution behaviour of new cationic surfactants, synthesized by using long-chain Guerbet alcohols, in water was investigated by a polarizing microscopic technique, differential scanning calorimetry, and electric conductivity measurements. These surfactants show the gel-liquid crystalline phase transition to be lower than 0 degrees C and form lamellar liquid crystals even in cold water and at low concentrations of surfactants. The sorption of cationic surfactants from aqueous solutions onto hair was determined as a function of temperature. The effect of adsorbed cationic surfactants on the critical surface tension and kinetic frictional coefficients of hair surface have been investigated. These surface characteristics of hair treated with quaternary ammonium compounds derived from Guerbet alcohols were found to be significantly improved. These results can be explained by the high ability of sorption onto hair. Hair rinses and conditioners having excellent ease of combing or brushing for wet and dry hair can be formulated by the application of these cationic surfactants.

  7. Effect of the surfactant on the availability of piroxicam as a poorly hydrosoluble drug from suppositories.

    Science.gov (United States)

    Dal Zorro, M; Franceschinis, E; Punchina, A; Realdon, N

    2012-01-01

    The use of surfactants in suppository formulations has been suggested to improve availability of poorly soluble drugs. In the present study, different kinds of surfactants have been investigated to clarify the influence on piroxicam release from suppositories formulated with both lipophilic and hydrophilic bases. Two hydrophilic glucose-derivate surfactants, and a polyoxylglyceride amphiphilic surfactant, all with high HLB values, were investigated for their use in improving drug availability. The two glucose derivate surfactants reduced drug availability from both lipophilic suppositories and hydrophilic formulations, according to longer disintegration times and drug micellization. The more complex surfactant, a lauroyl macrogolglyceride, showed an increase in piroxicam availability from lipophilic suppositories at the higher tested concentrations (15% and 20%). Otherwise, when used in hydrophilic formulations, it was less effective in promoting drug release and even reduced drug availability.

  8. EFFECT OF SURFACTANTS ON Ni-TiN NANOCOMPOSITE COATINGS PREPARED BY ULTRASONIC ELECTRODEPOSITION

    Institute of Scientific and Technical Information of China (English)

    XIA Fafeng; JIA Zhenyuan; WU Menghua; LI Zhi

    2008-01-01

    Ni-TiN nanocomposite coatings were prepared by ultrasonic electrodeposition, and the effects of the surfactants on the coatings were investigated and the microstructure and micro rigidity of the coatings were characterized. Samples were also submitted to corrosion tests in 3% NaCl solution. The results showed that the surfactants had great effects on Ni-TiN nanocomposite coatings. The composite coatings prepared by ultrasonic electrodeposition with the surfactants were better than that of the coatings prepared without surfactants. The favorable properties of Ni-TiN nanocomposite coatings were prepared with the mixing of the non-ion and positive ion surfactants. The concentration of the mixing was 80 mg/L, and the ratio of the non-ion and positive ion surfactants was 1: 2.

  9. Tethered balloon-based particle number concentration, and size distribution vertical profiles within the lower troposphere of Shanghai

    Science.gov (United States)

    Zhang, Kun; Wang, Dongfang; Bian, Qinggen; Duan, Yusen; Zhao, Mengfei; Fei, Dongnian; Xiu, Guangli; Fu, Qingyan

    2017-04-01

    A tethered balloon-based measurement campaign of particle number concentration (PNC) and particle number size distribution (PNSD) in the size range of 15.7-661.2 nm was conducted within the lower troposphere of 1000 m in Shanghai, a Chinese megacity, during December of 2015. The meteorological conditions, PNC, and PNSD were synchronously measured at the ground-based station as well as by the tethered balloon. On ground level, the 88.2 nm particles were found to have the highest PNC. The Pearson correlation analysis based on the ground level data showed NO2 had a strong correlation with PNC. The synchronous measurement of PNC and PNSD at the ground station and on the tethered balloon showed that the 15.7-200 nm particles had higher PNC on ground level, but the PNC of 200-661.2 nm particles was higher at 400 m. One haze event (Dec 22nd-Dec 23rd) was selected for detailed discussion on the variation of vertical profiles of PNSD and PNC. The vertical distribution of characteristics of PNC and PNSD were observed and compared. Results indicated that the highest MaxDm (the diameter with the highest PNC) during those three launches all appeared at a high altitude, usually above 300 m. Compared to the clean days, the relatively bigger MaxDm at each height in the haze days also indicated regional transport of pollutants might contribute to more to that haze event.

  10. Innovation in surfactant therapy II: surfactant administration by aerosolization.

    Science.gov (United States)

    Pillow, J Jane; Minocchieri, S

    2012-01-01

    Instilled bolus surfactant is the only approved surfactant treatment for neonatal respiratory distress syndrome. However, recent trends towards increased utilization of noninvasive respiratory support for preterm infants with surfactant deficiency have created a demand for a similarly noninvasive means of administering exogenous surfactant. Past approaches to surfactant nebulization met with varying success due to inefficient aerosol devices resulting in low intrapulmonary delivery doses of surfactant with variable clinical effectiveness. The recent development of vibrating membrane nebulizers, coupled with appropriate positioning of the interface device, indicates that efficient delivery of aerosolized surfactant is now a realistic goal in infants. Evidence of clinical effect despite low total administered dose in pilot studies, together with suggestions of enhanced homogeneity of pulmonary distribution indicate that this therapy may be applied in a cost-effective manner, with minimal patient handling and disruption. These studies need to be subjected to appropriately designed randomized controlled trials. Further work is also required to determine the optimum delivery route (mask, intranasal prong, nasopharyngeal or laryngeal), dosing amount and redosing interval.

  11. Physicochemical treatments of anionic surfactants wastewater: Effect on aerobic biodegradability.

    Science.gov (United States)

    Aloui, Fathi; Kchaou, Sonia; Sayadi, Sami

    2009-05-15

    The effect of different physicochemical treatments on the aerobic biodegradability of an industrial wastewater resulting from a cosmetic industry has been investigated. This industrial wastewater contains 11423 and 3148mgL(-1) of chemical oxygen demand (COD) and anionic surfactants, respectively. The concentration of COD and anionic surfactants were followed throughout the diverse physicochemical treatments and biodegradation experiments. Different pretreatments of this industrial wastewater using chemical flocculation process with lime and aluminium sulphate (alum), and also advanced oxidation process (electro-coagulation (Fe and Al) and electro-Fenton) led to important COD and anionic surfactants removals. The best results were obtained using electro-Fenton process, exceeding 98 and 80% of anionic surfactants and COD removals, respectively. The biological treatment by an isolated strain Citrobacter braakii of the surfactant wastewater, as well as the pretreated wastewater by the various physicochemical processes used in this study showed that the best results were obtained with electro-Fenton pretreated wastewater. The characterization of the treated surfactant wastewater by the integrated process (electro-coagulation or electro-Fenton)-biological showed that it respects Tunisian discharge standards.

  12. Solubilization isotherms of aromatic solutes in surfactant aggregates

    Energy Technology Data Exchange (ETDEWEB)

    Gadelle, F.; Koros, W.J.; Schechter, R.S. (Univ. of Texas, Austin, TX (United States). Dept. of Chemical Engineering)

    1995-03-01

    Several factors affecting solubilization of aromatic solutes in surfactant micelles have been investigated. Solubilization isotherms of benzene, toluene, and chlorobenzene in various aqueous micellar solutions were determined using head space gas chromatography. Cationic surfactants such as cetylpyridinium chloride or cetyltrimethylammonium bromide present high solubilization capacities. Comparable anionic surfactants exhibit lower solubilization and a greater tendency to precipitate. It was observed that nonionic surfactants show high solubilization on a molar basis. Solubilization in mixed cationic-anionic micelles was also investigated. It also appears that the molecular size of the solute determines the extent of the solubilization. Finally, the shape of the different isotherms indicates that knowing the amount solubilized at saturation of the micellar solution is not sufficient to estimate solubilization at solute concentrations lower than the solute aqueous solubility. Solubilization of organics in surfactant micelles is of major importance in many applications. One new application is micellar-enhanced ultrafiltration. Another application of interest is the surfactant-enhanced aquifer remediation, a process in which a micellar aqueous solution is flushed into contaminated groundwaters to enhance recovery of pollutants by micellar solubilization.

  13. Acute toxicity of anionic and non-ionic surfactants to aquatic organisms.

    Science.gov (United States)

    Lechuga, M; Fernández-Serrano, M; Jurado, E; Núñez-Olea, J; Ríos, F

    2016-03-01

    The environmental risk of surfactants requires toxicity measurements. As different test organisms have different sensitivity to the toxics, it is necessary to establish the most appropriate organism to classify the surfactant as very toxic, toxic, harmful or safe, in order to establish the maximum permissible concentrations in aquatic ecosystems. We have determined the toxicity values of various anionic surfactants ether carboxylic derivatives using four test organisms: the freshwater crustacean Daphnia magna, the luminescent bacterium Vibrio fischeri, the microalgae Selenastrum capricornutum (freshwater algae) and Phaeodactylum tricornutum (seawater algae). In addition, in order to compare and classify the different families of surfactants, we have included a compilation of toxicity data of surfactants collected from literature. The results indicated that V. fischeri was more sensitive to the toxic effects of the surfactants than was D. magna or the microalgae, which was the least sensitive. This result shows that the most suitable toxicity assay for surfactants may be the one using V. fischeri. The toxicity data revealed considerable variation in toxicity responses with the structure of the surfactants regardless of the species tested. The toxicity data have been related to the structure of the surfactants, giving a mathematical relationship that helps to predict the toxic potential of a surfactant from its structure. Model-predicted toxicity agreed well with toxicity values reported in the literature for several surfactants previously studied. Predictive models of toxicity is a handy tool for providing a risk assessment that can be useful to establish the toxicity range for each surfactant and the different test organisms in order to select efficient surfactants with a lower impact on the aquatic environment.

  14. Boron concentration profiling by high angle annular dark field-scanning transmission electron microscopy in homoepitaxial δ-doped diamond layers

    Energy Technology Data Exchange (ETDEWEB)

    Araújo, D.; Alegre, M. P.; Piñero, J. C. [Dpto Ciencia de los Materiales, Facultad de Ciencias, Universidad de Cádiz, 11510 Puerto Real (Cádiz) (Spain); Fiori, A.; Bustarret, E. [Institut Néel, CNRS-Université Joseph Fourier, 25 av. des Martyrs, 38042 Grenoble (France); Jomard, F. [Groupe d' Etude de la Matière Condensée (GEMaC), UMR 8635 du CNRS, UVSQ, 45 av. des Etats-Unis, 78035 Versailles Cedex (France)

    2013-07-22

    To develop further diamond related devices, the concentration and spatial location of dopants should be controlled down to the nanometer scale. Scanning transmission electron microscopy using the high angle annular dark field mode is shown to be sensitive to boron doping in diamond epilayers. An analytical procedure is described, whereby local boron concentrations above 10{sup 20} cm{sup −3} were quantitatively derived down to nanometer resolution from the signal dependence on thickness and boron content. Experimental boron local doping profiles measured on diamond p{sup −}/p{sup ++}/p{sup −} multilayers are compared to macroscopic profiles obtained by secondary ion mass spectrometry, avoiding reported artefacts.

  15. How Chain Length and Charge Affect Surfactant Denaturation of Acyl Coenzyme A Binding Protein (ACBP)

    DEFF Research Database (Denmark)

    Andersen, Kell Kleiner; Otzen, Daniel

    2009-01-01

    Using intrinsic tryptophan fluorescence, equilibria and kinetics of unfolding of acyl coenzyme A binding protein (ACBP) have been investigated in sodium alkyl sulfate surfactants of different chain length (8-16 carbon atoms) and with different proportions of the nonionic surfactant dodecyl...... maltoside (DDM). The aim has been to determine how surfactant chain length and micellar charge affect the denaturation mechanism. ACBP denatures in two steps irrespective of surfactant chain length, but with increasing chain length, the potency of the denaturant rises more rapidly than the critical micelle...... constants increases linearly with denaturant concentration below the cmc but declines at higher concentrations. Both shortening chain length and decreasing micellar charge reduce the overall kinetics of unfolding and makes the dependence of unfolding rate constants on surfactant concentration more complex...

  16. Molecular dynamics simulations of phase separation in the presence of surfactants

    DEFF Research Database (Denmark)

    Laradji, Mohamed; Mouritsen, Ole G.; Toxvaerd, Søren

    1994-01-01

    The dynamics of phase separation in two-dimensional binary mixtures diluted by surfactants is studied by means of molecular dynamics simulations. In contrast to pure binary systems, characterized by an algebraic time dependence of the average domain size, we find that systems containing surfactants...... exhibit nonalgebraic, slow dynamics. The average domain size eventually saturates at a value inversely proportional to the surfactant concentration. We also find that phase separation in systems with different surfactant concentrations follow a crossover scaling form. Finally, although these systems do...... not fully phase separate, we observe a dynamical scaling which is independent of the surfactant concentration. The results of these simulations are in general in agreement with previous Langevin simulations [Laradji, Guo, Grant, and Zuckermann, J. Phys. A 44, L629 (1991)] and a theory of Ostwald ripening...

  17. Partition and water/oil adsorption of some surfactants.

    Science.gov (United States)

    Tadmouri, Rawad; Zedde, Chantal; Routaboul, Corinne; Micheau, Jean-Claude; Pimienta, Véronique

    2008-10-02

    Adsorption isotherms have been determined at the water/oil interface for five biphasic systems involving surfactants (non-ionic and ionic) present in both phases at partition equilibrium. The systems studied were polyoxyethylene(23)lauryl ether (Brij35) in water/hexane and four ionic surfactants, hexadecyltrimethylammonium bromide (CTAB), and a series of three tetraalkylammonium dodecylsulfate (TEADS, TPADS, and TBADS) in water/CH 2Cl 2. Interfacial tension measurements performed at the water/air and water/oil interfaces provided all the necessary information for the determination of the adsorption parameters by taking partition into account. These measurements also allowed the comparison of the adsorption properties at both interfaces which showed an increase of the adsorption equilibrium constant and a decrease of the maximum surface concentration at the water/oil interface compared to water/air. The values of the critical aggregation concentration showed, in all cases, that only the surfactant dissolved in the aqueous phase contribute to the decrease of the water/oil interfacial tension. In the case of the four ionic surfactants, the critical aggregation concentration obtained in biphasic conditions were lowered because of the formation of mixed surfactant-CH 2Cl 2 aggregates.

  18. INFLUENCE OF CULTIVATION CONDITIONS ON ANTIMICROBIAL PROPERTIES OF Nocardia vaccinii ІMV B-7405 SURFACTANTS

    Directory of Open Access Journals (Sweden)

    Т. P.

    2016-02-01

    Full Text Available The aim of the work was investigation of antimicrobial effect of Nocardia vaccinii ІMV B-7405 surfactants, synthesized in various culture conditions, against phytopathogenic bacteria of genera Pseudomonas, Xanthomonas, and Pectobacterium. The antimicrobial properties of surfactant were determined in suspension culture by Koch method and also by index of the minimum inhibitory concentration. Surfactants were extracted from supernatant of cultural liquid using mixture of chloroform and methanol (2: 1. It has been established that antimicrobial properties of surfactants depend on the nature of the carbon source in the medium (refined vegetable oil, as well as waste oil after frying potatoes and meat, glycerol, the duration of the cultivation (5 and 7 days, the degree of purification of the surfactants (the supernatant of cultural liquid, purified surfactants solution and the test culture type. The highest antimicrobial activity was exhibited by purified surfactants solutions synthesized by microorganisms on the waste oil after potato frying (decreased survival of pathogenic bacteria by 50–95%, and surfactants formed within 7 days of strain B-7405 ІMV cultivation on all test substrates (minimum inhibitory concentration 7–40 µg/mL, which is several times lower than the surfactant, synthesized for 5 days. These data are promising for the development of ecologically friendly biopreparations for the regulation of the number of phytopathogenic bacteria.

  19. Pyrene removal from contaminated soil using electrokinetic process combined with surfactant

    Directory of Open Access Journals (Sweden)

    Seyed Enayat Hashemi

    2015-07-01

    Full Text Available Background: Pyrene is one of the stable polycyclic aromatic hydrocarbons that is considered as an important pollutants, because of extensive distribution in the environment and carcinogenic and mutagenic properties. Among the various treatment techniques, electrokinetic method is an environmental- friendly process for organic and mineral pollutants adsorbed to soil with fine pore size the same as clay and low hydraulic conductivity soils. For improving the efficiency of pyrene removal from soil, soulobilization of pyrene from soil could be used by surfactants. Materials and Methods : In this study, clay soil was selected as model because of the specific properties. Combined method using surfactant and electrokinetic was applied for pyrene removal from soil. Experiments were designed using response surface methodology (RSM, and effect of three variables includes surfactant concentration, voltage and surfactant type were evaluated for pyrene removal from contaminated soil. Results: Pyrene removal using anionic surfactants(SDS and nonionic surfactants(TX100 as a solubilizing agents has high removal efficiency. In the optimum condition with 95% confidence coefficient, utilizing mixed surfactants of sodium dodecyl sulfate and triton X-100 with the same volume, induced of 18.54 volt and 6.53 percent surfactant concentration have 94.6% pyrene removal efficiency. Conclusion:: Results of this study shows that electrokinetic process combined with surfactant as solubilizing agent could be applied as an efficient method for treating the pyrene-contaminated soils.

  20. A conductometric investigation of hydroxypropylmethyl cellulose/sodium dodecyl sulfate/nonionic surfactant systems

    Directory of Open Access Journals (Sweden)

    Petrović Lidija B.

    2014-01-01

    Full Text Available Surfactant mixtures are very often used in various cosmetic and pharmaceutical products because they commonly act in synergism and provide more favorable properties than the single surfactants. At the same time, the 9 presence of polymers in mixtures of surfactants may lead to molecular interactions thereby affecting product stability and activity. For these reasons it is very important to determine the surfactant interactions influence on 1micellization and mixed micellization, as well as polymer-surfactants mixed micelles interactions. In this work we examined self-aggregation of nonionic surfactants, polysorbate 20 (Tween 20, polyoxyethylene octylphenyl ether (Triton X100 and polyoxyethylene-polyoxypropylene block copolymer (Pluronic F68 with ionic surfactant, sodium dodecylsulfate, in aqueous solution at 40ºC using conductometric titration method. It was found that concentration region for mixed micelle formation depends on nonionic surfactant characteristics and its concentration. Formation of surfactants mixed micelles in the presence of nonionic polymer, hydroxypropylmethyl cellulose, and their binding to polymer hydrophobic sites, were investigated too. Analysis of obtained results points to different kinds of interactions in investigated systems, which are crucial for their application. [Projekat Ministarstva nauke Republike Srbije, br. III 46010

  1. Effect of Spacers on CMCs and Micelle-forming Enthalpies of Gemini Surfactants by Titration Microcalorimetry

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The critical micelle concentrations (CMC) and the micelle-forming enthalpies (D Hmic) of gemini surfactants were first measured by the precise titration microcalorimetry. The results showed that D Hmic values are negative, and there is an exothermal minimum between s=4 and s=6. Furthermore, the CMCs of the surfactants are in good agreement with literature values.

  2. Thin Film Equations with Soluble Surfactant and Gravity: Modeling and Stability of Steady States

    CERN Document Server

    Escher, Joachim; Laurençot, Philippe; Walker, Christoph

    2010-01-01

    A thin film on a horizontal solid substrate and coated with a soluble surfactant is considered. The governing degenerate parabolic equations for the film height and the surfactant concentrations on the surface and in the bulk are derived using a lubrication approximation when gravity is taken into account. It is shown that the steady states are asymptotically stable.

  3. Classification of calorimetric titration plots for alkyltrimethylammonium and alkylpyridinium cationic surfactants in aqueous solutions

    NARCIS (Netherlands)

    Bijma, K; Engberts, J.B.F.N.; Blandamer, M.J; Cullis, P.M.; Last, P.M.; Irlam, K.D.; Soldi, L.G.

    1997-01-01

    Calorimetric titration plots for deaggregation of micelles formed by alkylpyridinium and alkyltrimethylammonium surfactants are classified into three types, A, B and C, depending on the shape of the plot of the enthalpy of dilution as a function of surfactant concentration. For Type A plots the reco

  4. Classification of calorimetric titration plots for alkyltrimethylammonium and alkylpyridinium cationic surfactants in aqueous solutions

    NARCIS (Netherlands)

    Bijma, K; Engberts, J.B.F.N.; Blandamer, M.J; Cullis, P.M.; Last, P.M.; Irlam, K.D.; Soldi, L.G.

    1997-01-01

    Calorimetric titration plots for deaggregation of micelles formed by alkylpyridinium and alkyltrimethylammonium surfactants are classified into three types, A, B and C, depending on the shape of the plot of the enthalpy of dilution as a function of surfactant concentration. For Type A plots the

  5. Observation of vertcal CO2 concentration profiles in the lower-atmosphere using a compact direct detection 1.6 μm DIAL

    Science.gov (United States)

    Nagasawa, C.; Shibata, Y.; Abo, M.

    2015-12-01

    Knowledge of present carbon sources and sinks including their spatial profile and their variation in time is one of the essential informations for predicting future CO2 atmospheric concentration levels. Moewover, for the detailed analysis of forest carbon dynamics and CO2 fluxes of urban area, the CO2 concentration measurement techniques with high spatial and temporal resolution are required in the lower atmosphere. A differential absorption lidar (DIAL) is expected to measure atmospheric CO2 concentration profiles in the atmospheric boundary layer from a ground platform. We have succeeded to develop a compact direct detection 1.6 μm DIAL system for measuring CO2 concentration profiles in the lower atmosphere. This DIAL system consists of the optical parametric generator (OPG) transmitter that excited by the LD pumped Nd:YAG laser with high repetition rate and the receiving optics that included the near-infrared photomultiplier tube operating at the analog mode and the 25 cm telescope. We have succeeded in observing the daytime temporal change of vertical CO2 concentration profiles for the range from 0.25 to 2.5 km with integration time of 30 minutes and range resolution of 300 m. This compact direct detection CO2 DIAL is usefull for the estimation of CO2 flux. This work was financially supported by the System Development Program for Advanced Measurement and Analysis of the Japan Science and Technology Agency.

  6. Structure of the SDS/1-dodecanol surfactant mixture on a graphite surface: a computer simulation study.

    Science.gov (United States)

    Domínguez, Hector

    2010-05-15

    Molecular dynamics simulations of mixtures of sodium dodecyl sulfate (SDS) and 1-dodecanol molecules on a graphite surface were carried out at low and high concentration to investigate the formation of aggregates on the solid plate. The simulations showed that at low concentration the surfactants were well adsorbed on the surface by forming layers structures or a hemicylinder aggregate for a slightly higher surfactant concentration whereas at the highest concentration the surfactants formed monolayer-like structures localized away from the graphite surface with a water bin between the monolayer and the graphite plate. Therefore, we obtained different arrays of those observed in recent simulations of pure SDS adsorbed on graphite at the same concentration reported in the literature. The unexpected water layer between the 1-dodecanol and the graphite surface, at the highest concentration, was explained in terms of the Hamaker constants. The present results suggest that the formation of aggregates on solid surfaces is a combined effect not only of the surfactant-surfactant and the surfactant-wall interactions but also of the surfactant concentration.

  7. Water repellency induced by pulmonary surfactants.

    Science.gov (United States)

    Hills, B A

    1982-04-01

    1. Pure cotton fabric was partially carboxylated to produce a tough, porous, hydrophilic sub-phase to stimulate the epithelial membrane of the alveolar wall from a permeability standpoint. 2. Two of the predominant pulmonary surfactants, dipalmitoyl lecithin (DPL) and dipalmitoyl phosphatidylethanolamine (DPPE), were found to inhibit wetting of this synthetic membrane and of human cutaneous epithelium as manifest by a large contact angle. 3. When treated with DPL at physiological concentrations, the porous synthetic membrane was found to support a head of saline well in excess of systolic pulmonary artery pressure with no penetration and could do so for periods well in excess of 1 hr; untreated control samples allowed almost immediate fluid filtration. 4. Filtration could be initiated in the DPL-treated membranes by wetting the reverse side, confirming that the threshold pressure for fluid penetration was afforded by capillarity and, hence, by water repellency induced by the surfactant. 5. Water repellency induced by the amphoteric surfactants occurring naturally in the lung is discussed as a possible factor contributing to the pressure threshold to be exceeded for alveolar oedema to form. 6. Evidence is reviewed and several advantages discussed for the implied concept of an essentially dry lining to the alveolus with a discontinuous liquid layer largely confined to convex corners which could slowly resolve any oedema by surface forces.

  8. Therapeutic surfactant-stripped frozen micelles

    Science.gov (United States)

    Zhang, Yumiao; Song, Wentao; Geng, Jumin; Chitgupi, Upendra; Unsal, Hande; Federizon, Jasmin; Rzayev, Javid; Sukumaran, Dinesh K.; Alexandridis, Paschalis; Lovell, Jonathan F.

    2016-05-01

    Injectable hydrophobic drugs are typically dissolved in surfactants and non-aqueous solvents which can induce negative side-effects. Alternatives like `top-down' fine milling of excipient-free injectable drug suspensions are not yet clinically viable and `bottom-up' self-assembled delivery systems usually substitute one solubilizing excipient for another, bringing new issues to consider. Here, we show that Pluronic (Poloxamer) block copolymers are amenable to low-temperature processing to strip away all free and loosely bound surfactant, leaving behind concentrated, kinetically frozen drug micelles containing minimal solubilizing excipient. This approach was validated for phylloquinone, cyclosporine, testosterone undecanoate, cabazitaxel and seven other bioactive molecules, achieving sizes between 45 and 160 nm and drug to solubilizer molar ratios 2-3 orders of magnitude higher than current formulations. Hypertonic saline or co-loaded cargo was found to prevent aggregation in some cases. Use of surfactant-stripped micelles avoided potential risks associated with other injectable formulations. Mechanistic insights are elucidated and therapeutic dose responses are demonstrated.

  9. Viscosity of the oil-in-water Pickering emulsion stabilized by surfactant-polymer and nanoparticle-surfactant-polymer system

    Science.gov (United States)

    Sharma, Tushar; Kumar, G. Suresh; Chon, Bo Hyun; Sangwai, Jitendra S.

    2014-11-01

    Information on the viscosity of Pickering emulsion is required for their successful application in upstream oil and gas industry to understand their stability at extreme environment. In this work, a novel formulation of oil-in-water (o/w) Pickering emulsion stabilized using nanoparticle-surfactant-polymer (polyacrylamide) system as formulated in our earlier work (Sharma et al., Journal of Industrial and Engineering Chemistry, 2014) is investigated for rheological stability at high pressure and high temperature (HPHT) conditions using a controlled-strain rheometer. The nanoparticle (SiO2 and clay) concentration is varied from 1.0 to 5.0 wt%. The results are compared with the rheological behavior of simple o/w emulsion stabilized by surfactant-polymer system. Both the emulsions exhibit non-Newtonian shear thinning behavior. A positive shift in this behavior is observed for surfactant-polymer stabilized emulsion at high pressure conditions. Yield stress is observed to increase with pressure for surfactant-polymer emulsion. In addition, increase in temperature has an adverse effect on the viscosity of emulsion stabilized by surfactant-polymer system. In case of nanoparticle-surfactant-polymer stabilized o/w emulsion system, the viscosity and yield stress are predominantly constant for varying pressure and temperature conditions. The viscosity data for both o/w emulsion systems are fitted by the Herschel-Bulkley model and found to be satisfactory. In general, the study indicates that the Pickering emulsion stabilized by nanoparticle-surfactant-polymer system shows improved and stable rheological properties as compared to conventional emulsion stabilized by surfactant-polymer system indicating their successful application for HPHT environment in upstream oil and gas industry.

  10. Vapour-liquid equilibrium relationship between toluene and mixed surfactants.

    Science.gov (United States)

    Tian, Senlin; Li, Yingjie; Mo, Hong; Ning, Ping

    2012-01-01

    Micellar partitioning of volatile organic compounds (VOCs) in surfactant solutions and its effects on vapour-liquid equilibrium is fundamental to the overall design and implementation ofsurfactant-enhanced remediation. Knowledge of the vapour-liquid equilibrium partitioning coefficients for VOCs, especially in contaminated soils and groundwater in which they exist, is required. Headspace experiments were performed to quantify the effect of three mixed surfactants, cetyltrimethyl ammonium bromide (CTMAB) with tetrabutylammonium bromide (TBAB), sodium dodecyl sulphate (SDS) with Triton X-405 (TX405), and CTMAB with Triton X-100 (TX100), on the apparent Henry's constants (Hc) of toluene at temperatures ranging from 25 degrees C to 40 degrees C. The Hc values were significantly reduced in the presence of all three mixed surfactants at concentrations above their critical micelle concentrations (CMC). Mixed micellar partitioning, showing effects on the vapour-liquid equilibrium of toluene, was primarily responsible for the significant reduction of Hc in their mixed systems. The mixed surfactants CTMAB-TX100 had the greatest effect on Hc above the CMC, followed by SDS-TX405, then CTMAB-TBAB. Mixed systems of CTMAB-TX100 decreased Hc at concentrations significantly lower than the SDS-TX405 and CTMAB-TBAB concentrations, because of to the lower CMC of CTMAB-TX100. Vapour-liquid equilibrium data were also tested against the model (Hc = H/(1 + K(X - CMC)) that described the partitioning of VOCs in vapour-water-micelle phases. The correlation of Hc with mixed surfactant concentrations (X) and CMC can be utilized as an effective tool to predict the Hc by mixed surfactants.

  11. Surfactant enhanced volumetric sweep efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Harwell, J.H.; Scamehorn, J.F.

    1989-10-01

    Surfactant-enhanced waterflooding is a novel EOR method aimed to improve the volumetric sweep efficiencies in reservoirs. The technique depends upon the ability to induce phase changes in surfactant solutions by mixing with surfactants of opposite charge or with salts of appropriate type. One surfactant or salt solution is injected into the reservoir. It is followed later by injection of another surfactant or salt solution. The sequence of injections is arranged so that the two solutions do not mix until they are into the permeable regions well away from the well bore. When they mix at this point, by design they form a precipitate or gel-like coacervate phase, plugging this permeable region, forcing flow through less permeable regions of the reservoir, improving sweep efficiency. The selectivity of the plugging process is demonstrated by achieving permeability reductions in the high permeable regions of Berea sandstone cores. Strategies were set to obtain a better control over the plug placement and the stability of plugs. A numerical simulator has been developed to investigate the potential increases in oil production of model systems. Furthermore, the hardness tolerance of anionic surfactant solutions is shown to be enhanced by addition of monovalent electrolyte or nonionic surfactants. 34 refs., 32 figs., 8 tabs.

  12. Solubilization of pentanol by cationic surfactants and binary mixtures of cationic surfactants

    Energy Technology Data Exchange (ETDEWEB)

    Morgan, M.E.

    1993-12-31

    The research reported here has included studies of the solubilization of pentanol in hexadecylpyridinium chloride (CPC), trimethyletetradecylammonium chloride (C{sub 14}Cl), benzyldimethyltetradecylammonium chloride (C{sub 14}BzCl), benzyldimethylhexadecylpyridinium chloride (C{sub 16}BzCl), hexadecyltrimethylammonium bromide (CTAB), and binary mixtures of CPC + C{sub 16}BzCl and C{sub 14}Cl + C{sub 14}BzCl. Rather than using calorimetric methods, this project will employ headspace chromatography to measure solubilization of pentanol over a wide range of solute concentrations. While not yielding as much thermodynamic data as calorimetry, headspace chromatography is a more direct measure of the extent of solubilization. Using headspace chromatography, is a more direct measure of the extent of solubilization. Using headspace chromatography, this study will seek to determine whether strongly synergistic mixture ratios exist in the case of binary cationic surfactant systems. There are two equilibria in the pentanol-water-surfactant system: (1) The pentanol solubilized in micelles is in equilibrium with the monomeric pentanol in solution, and (2) the monomeric pentanol is in equilibrium with the pentanol in the vapor above the solution. To establish the link between the two equilibria, a sample of the vapor above pure liquid pentanol must be collected, in order to find the activity of pentanol in solution. Also, a calibration curve for various concentrations of pentanol in solution. From this type of data it is possible to infer both the concentration of pentanol solubilized in micelles and the concentrations of pentanol in the ``bulk`` solution outside the micelles. The method is equally applicable to systems containing a single surfactant as well as mixtures of surfactants.

  13. Iodine Treatment in Children with Subclinical Hypothyroidism Due to Chronic Iodine Deficiency Decreases Thyrotropin and C-Peptide Concentrations and Improves the Lipid Profile

    OpenAIRE

    M.B. Zimmermann; Aeberli, I; Boonstra, A.; Grimci, L.; Bridson, J; Chaouki, N.; Mbhenyane, X.; Jooste, P L

    2009-01-01

    Background: Chronic iodine deficiency (ID) increases thyrotropin (TSH) concentrations and produces a thyroid hormone pattern consistent with subclinical hypothyroidism (ScH). ScH may be associated with cardiovascular disease risk factors. Thus, the study aim was to determine if iodine treatment of children with elevated TSH concentrations due to ID would affect their lipid profile, insulin (C-peptide) levels, and/or subclinical inflammation. Methods: In controlled intervention trials of oral ...

  14. Quantification of Hydrogen Concentrations in Surface and Interface Layers and Bulk Materials through Depth Profiling with Nuclear Reaction Analysis.

    Science.gov (United States)

    Wilde, Markus; Ohno, Satoshi; Ogura, Shohei; Fukutani, Katsuyuki; Matsuzaki, Hiroyuki

    2016-03-29

    Nuclear reaction analysis (NRA) via the resonant (1)H((15)N,αγ)(12)C reaction is a highly effective method of depth profiling that quantitatively and non-destructively reveals the hydrogen density distribution at surfaces, at interfaces, and in the volume of solid materials with high depth resolution. The technique applies a (15)N ion beam of 6.385 MeV provided by an electrostatic accelerator and specifically detects the (1)H isotope in depths up to about 2 μm from the target surface. Surface H coverages are measured with a sensitivity in the order of ~10(13) cm(-2) (~1% of a typical atomic monolayer density) and H volume concentrations with a detection limit of ~10(18) cm(-3) (~100 at. ppm). The near-surface depth resolution is 2-5 nm for surface-normal (15)N ion incidence onto the target and can be enhanced to values below 1 nm for very flat targets by adopting a surface-grazing incidence geometry. The method is versatile and readily applied to any high vacuum compatible homogeneous material with a smooth surface (no pores). Electrically conductive targets usually tolerate the ion beam irradiation with negligible degradation. Hydrogen quantitation and correct depth analysis require knowledge of the elementary composition (besides hydrogen) and mass density of the target material. Especially in combination with ultra-high vacuum methods for in-situ target preparation and characterization, (1)H((15)N,αγ)(12)C NRA is ideally suited for hydrogen analysis at atomically controlled surfaces and nanostructured interfaces. We exemplarily demonstrate here the application of (15)N NRA at the MALT Tandem accelerator facility of the University of Tokyo to (1) quantitatively measure the surface coverage and the bulk concentration of hydrogen in the near-surface region of a H2 exposed Pd(110) single crystal, and (2) to determine the depth location and layer density of hydrogen near the interfaces of thin SiO2 films on Si(100).

  15. Flow improvers for water injection based on surfactants

    Energy Technology Data Exchange (ETDEWEB)

    Oskarsson, H.; Uneback, I.; Hellsten, M.

    2006-03-15

    In many cases it is desirable to increase the flow of injection water when an oil well deteriorates. It is very costly in offshore operation to lay down an additional water pipe to the injection site. Flow improvers for the injection water will thus be the most cost-effective way to increase the flow rate. During the last years water-soluble polymers have also been applied for this purpose. These drag-reducing polymers are however only slowly biodegraded which has been an incentive for the development of readily biodegradable surfactants as flow improvers for injection water. A combination of a zwitterionic and an anionic surfactant has been tested in a 5.5 inch, 700 m long flow loop containing sulphate brine with salinity similar to sea water. A drag reduction between 75 and 80% was achieved with 119 ppm in solution of the surfactant blend at an average velocity of 1.9 m/s and between 50 and 55% at 2.9 m/s. The surfactants in this formulation were also found to be readily biodegradable in sea water and low bio accumulating which means they have an improved environmental profile compared to the polymers used today. Due to the self-healing properties of the drag-reducing structures formed by surfactants, these may be added before the pump section - contrary to polymers which are permanently destroyed by high shear forces. (Author)

  16. Impact of cationic surfactant on the self-assembly of sodium caseinate.

    Science.gov (United States)

    Vinceković, Marko; Curlin, Marija; Jurašin, Darija

    2014-08-27

    The impact of a cationic surfactant, dodecylammonium chloride (DDACl), on the self-assembly of sodium caseinate (SC) has been investigated by light scattering, zeta potential, and rheological measurements as well as by microscopy (transmission electron and confocal laser scanning microscopy). In SC dilute solutions concentration-dependent self-assembly proceeds through the formation of spherical associates and their aggregation into elongated structures composed of connected spheres. DDACl interacts with SC via its hydrophilic and hydrophobic groups, inducing changes in SC self-assembled structures. These changes strongly depend on the surfactant aggregation states (monomeric or micellar) as well as concentration ratio of both components, leading to the formation of soluble and insoluble complexes of nano- to microdimensions. DDACl monomers interact with SC self-assembled entities in a different way compared to their micelles. Surfactant monomers form soluble complexes (similar to surfactant mixed micelles) at lower SC concentration but insoluble gelatinous complexes at higher SC concentration. At surfactant micellar concentration soluble complexes with casein chains wrapped around surfactant micelles are formed. This study suggests that the use of proper cationic surfactant concentration will allow modification and control of structural changes of SC self-assembled entities.

  17. Self Assembly of Biogenic Surfactants at Mineral Surfaces and Their Effect on Biological Iron Acquisition

    Science.gov (United States)

    Kraemer, S. M.

    2005-12-01

    Microorganisms exude biogenic surfactants to modify the physical and chemical properties of mineral-water interfaces. Surfactants with negatively charged hydrophilic head groups interact strongly with oppositely charged mineral surfaces such as iron or aluminum oxides. Surfactant self assembly at mineral surfaces can result in the formation of admicelles that have a significant effect on the surface charge and hydrophobicity. These effects are exploited by microorganisms to facilitate attachment to mineral surfaces. Similarly, plants exude surfactants into the rhizosphere and change the surface tension and flow of soil water. Other surface active compounds that are typically found in soils and surface waters are humic substances and fatty acids that are produced by degradation of biomass. In general, surface active compounds are ubiquitous in natural systems. In this study we investigated how surfactants influence bio-mineral interactions using the example of siderophore promoted iron acquisition. Siderophore promoted iron acquisition involves the adsorption of a biogenic iron specific ligand (i.e. the siderophore) to iron oxides and the subsequent siderophore promoted iron oxide dissolution. The hypothesis of this project is that the modification of the iron oxide surface charge and hydrophobicity by adsorbed surfactants will have an important effect on siderophore adsorption and dissolution kinetics. We approached this subject by investigating the adsorption of a natural surfactant (rhamnolipids: RhL) and the synthetic surfactant (sodium dodecyl sulfate: SDS) on goethite (α-FeOOH, a common pedogenic iron oxide) and observing the effect of surfactant self assembly on the properties of the mineral water interface. We observed fast adsorption kinetics at pH 3 and slow adsorption at pH 6. The adsorbed surfactants reversed the surface potential of goethite (as evidenced by electrophoretic mobility measurements) at soluble surfactant concentrations below 10 μM (SDS

  18. Biosurfactants and surfactants interacting with membranes and proteins: Same but different?

    Science.gov (United States)

    Otzen, Daniel E

    2017-04-01

    Biosurfactants (BS) are surface-active molecules produced by microorganisms. For several decades they have attracted interest as promising alternatives to current petroleum-based surfactants. Aside from their green profile, they have remarkably low critical micelle concentrations, reduce the air/water surface tension to very low levels and are excellent emulsifiers, all of which make them comparable or superior to their synthetic counterparts. These remarkable physical properties derive from their more complex chemical structures in which hydrophilic and hydrophobic regions are not as clearly separated as chemical surfactants but have a more mosaic distribution of polarity as well as branched or circular structures. This allows the lipopeptide surfactin to adopt spherical structures to facilitate dense packing at interfaces. They are also more complex. Glycolipid BS, e.g. rhamnolipids (RL) and sophorolipids, are produced biologically as mixtures which vary in the size and saturation of the hydrophobic region as well as modifications in the hydrophilic headgroup, such as the number of sugar groups and different levels of acetylation, leading to variable surface-active properties. Their amphiphilicity allows RL to insert easily into membranes at sub-cmc concentrations to modulate membrane structure and extract lipopolysaccharides, leading to extensive biofilm remodeling in vivo, sometimes in collaboration with hydrophobic RL precursors. Thanks to their mosaicity, even anionic BS like RL only bind weakly to proteins and show much lower denaturing potency, even supporting membrane protein refolding. Nevertheless, they can promote protein degradation by proteases e.g. by neutralizing positive charges, which together with their biofilm-combating properties makes them very promising detergent surfactants. This article is part of a Special Issue entitled: Lipid order/lipid defects and lipid-control of protein activity edited by Dirk Schneider.

  19. Surfactants in the gut fluids of Porcellio scaber (Isopoda: Oniscidea), and their interactions with phenolics.

    Science.gov (United States)

    Zimmer, M

    1997-10-01

    Fluids from the gut lumen of Porcellio scaber showed significantly reduced surface tension compared to a buffer solution. Tests with several dilutions indicated that the concentration of the surface active substances (surfactants) was about 80-fold higher than the 'critical micelle concentration'. Phenolics, e.g. gallotannins, when ingested in the diet increased the surface tension of the gut fluid, indicating reduced concentrations of free surfactants. The significance of gut surfactants in P. scaber, their role in digestive processes, and their interaction with tannins in this saprophagous soil arthropod are discussed.

  20. Arbitrary Lagrangian-Eulerian method for computation of impinging droplet with soluble surfactants and dynamic contact angle

    CERN Document Server

    Ganesan, Sashikumaar

    2014-01-01

    An arbitrary Lagrangian--Eulerian (ALE) finite element scheme for computations of soluble surfactant droplet impingement on a horizontal surface is presented. The numerical scheme solves the time-dependent Navier--Stokes equations for the fluid flow, scalar convection-diffusion equation for the surfactant transport in the bulk phase, and simultaneously, surface evolution equations for the surfactants on the free surface and on the liquid-solid interface. The effects of surfactants on the flow dynamics are included into the model through the surfactant-dependent surface tension and dynamic contact angle. In particular, the dynamic contact angle of the droplet is defined as a function of surfactants using the nonlinear equation of state for surface tension. Further, the surface forces are included in the model using the Boussinesq-Scriven law that allows to incorporate the Marangoni effects without evaluating the gradients of surfactant concentration on the free surface. In addition to a mesh convergence study ...

  1. Effects of forage type, forage to concentrate ratio, and crushed linseed supplementation on milk fatty acid profile in lactating dairy cows

    NARCIS (Netherlands)

    Sterk, A.R.; Johansson, B.E.O.; Taweel, H.Z.H.; Murphy, M.; Vuuren, van A.M.; Hendriks, W.H.; Dijkstra, J.

    2011-01-01

    The effects of an increasing proportion of crushed linseed (CL) in combination with varying forage type (grass or corn silage) and forage to concentrate ratio (F:C), and their interactions on milk fatty acid (FA) profile of high-producing dairy cows was studied using a 3-factor Box-Behnken design. S

  2. Determination of the concentration profile and homogeneity of antioxidants and degradation products in a cross-linked polyethylene type A (PEXa) pipe

    DEFF Research Database (Denmark)

    Denberg, Martin; Mosbæk, Hans; Hassager, Ole;

    2009-01-01

    , the concentration profile was measured at four different places on a 100 m PEXa pipe. A two-way ANOVA analysis showed that the composition of Irganox (R) 1076 was homogenous in the radial direction and heterogeneous in the longitudinal direction. Two degradation products of antioxidants were detected, 2,6-di...

  3. Surfactant Enhanced Electroremediation of Phenanthrene

    Institute of Scientific and Technical Information of China (English)

    佘鹏; 杨建刚; 等

    2003-01-01

    Removal of hydrophobic organic contaminants(HOCs) form soil of low permeability by electroremediation was investigated by using phenanthrene and kaolinite as a model system.Tween 80 was added into the purging solution in order to enhance the solubility of phenanthrene.The effects of pH on the adsorption of phenanthrene and Tween 80 on kaolinite and the magnitude of ζ-potential of kaolinite were examined,respectively.The effects of electric field strength indicated by electric current on the electroremediation behavior,including the pH of purging solution,the conductivity,phenanthrene concentration and flow rate of effluent,were experimentally investigated,repectively,In case of an electric field of 25mA applied for 72 hours,over 90% of phenanthrene was removed from 424g(dry mass)of kaolinite at an energy consumption of 0.148kW.h.The experimental results described in present study show that the addition of surfactant into purging solution greatly enhances the removel of HOCs by electroremediation.

  4. In vitro surfactant structure-toxicity relationships: implications for surfactant use in sexually transmitted infection prophylaxis and contraception.

    Directory of Open Access Journals (Sweden)

    Ângela S Inácio

    Full Text Available BACKGROUND: The need for woman-controlled, cheap, safe, effective, easy-to-use and easy-to-store topical applications for prophylaxis against sexually transmitted infections (STIs makes surfactant-containing formulations an interesting option that requires a more fundamental knowledge concerning surfactant toxicology and structure-activity relationships. METHODOLOGY/PRINCIPAL FINDINGS: We report in vitro effects of surfactant concentration, exposure time and structure on the viability of mammalian cell types typically encountered in the vagina, namely, fully polarized and confluent epithelial cells, confluent but non-polarized epithelial-like cells, dendritic cells, and human sperm. Representatives of the different families of commercially available surfactants--nonionic (Triton X-100 and monolaurin, zwitterionic (DDPS, anionic (SDS, and cationic (C(nTAB (n = 10 to 16, C(12PB, and C(12BZK--were examined. Triton X-100, monolaurin, DDPS and SDS were toxic to all cell types at concentrations around their critical micelle concentration (CMC suggesting a non-selective mode of action involving cell membrane destabilization and/or destruction. All cationic surfactants were toxic at concentrations far below their CMC and showed significant differences in their toxicity toward polarized as compared with non-polarized cells. Their toxicity was also dependent on the chemical nature of the polar head group. Our results suggest an intracellular locus of action for cationic surfactants and show that their structure-activity relationships could be profitably exploited for STI prophylaxis in vaginal gel formulations. The therapeutic indices comparing polarized epithelial cell toxicity to sperm toxicity for all surfactants examined, except C(12PB and C(12BZK, does not justify their use as contraceptive agents. C(12PB and C(12BZK are shown to have a narrow therapeutic index recommending caution in their use in contraceptive formulations. CONCLUSIONS

  5. Biodegradability and toxicity of sulphonate-based surfactants in aerobic and anaerobic aquatic environments.

    Science.gov (United States)

    García, M T; Campos, E; Marsal, A; Ribosa, I

    2009-02-01

    Four types of commonly used sulphonate-based surfactants (alkane sulphonates, alpha-olefin sulphonates, sulphosuccinates and methyl ester sulphonates) were tested for their aerobic and anaerobic biodegradability as well as for their toxicity to Daphnia magna and Photobacterium phosphoreum to assess the effect of the surfactant structure on those properties. Aerobic biodegradation was evaluated by means of the CO2 headspace test and anaerobic biodegradation was assessed by a method based on the ECETOC test. All the surfactants tested were readily biodegraded under aerobic conditions. No clear effect of the surfactant structures on the toxicity to the aquatic organisms tested was found. The most significant differences in the surfactants studied were observed in their behaviour under anaerobic conditions. Alkane sulphonates, alpha-olefin sulphonates and methyl ester sulphonates were not mineralized in lab anaerobic digesters despite the fact that the last one showed a certain degree of primary degradation. Nevertheless, these surfactants did not significantly inhibit methanogenic activity at concentrations up to 15 g surfactant/kg dry sludge, a concentration that is much higher than the expected concentrations of these surfactants in real anaerobic digesters. Sulphosuccinates showed a high level of primary biodegradation in anaerobic conditions. However, linear alkyl sulphosuccinates were completely mineralized whereas branched alkyl sulphosuccinates achieved percentages of ultimate biodegradation < or =50%.

  6. Ecotoxicological characterization of polyoxyethylene glycerol ester non-ionic surfactants and their mixtures with anionic and non-ionic surfactants.

    Science.gov (United States)

    Ríos, Francisco; Fernández-Arteaga, Alejandro; Lechuga, Manuela; Fernández-Serrano, Mercedes

    2017-03-03

    This paper reports on a study that investigated the aquatic toxicity of new non-ionic surfactants derived from renewable raw materials, polyoxyethylene glycerol ester (PGE), and their binary mixtures with anionic and non-ionic surfactants. Toxicity of pure PGEs was determined using representative organisms from different trophic levels: luminescent bacteria (Vibrio fischeri), microalgae (Pseudokirchneriella subcapitata), and freshwater crustaceans (Daphnia magna). Relationships between toxicity and the structural parameters such as unit of ethylene oxide (EO) and hydrophilic-lipophilic balance (HLB) were evaluated. Critical micellar concentration (CMC) in the conditions of the toxicity test was also determined. It was found that the toxicity of the aqueous solutions of PGE decreased when the number of EO units in the molecule, HLB, and CMC increased. PGEs showed lower CMC in marine medium, and the toxicity to V. ficheri is lower when the CMC was higher. Given their non-polar nature, narcosis was expected to be the primary mode of toxic action of PGEs. For the mixture of surfactants, we observed that the mixtures with PGE that had the higher numbers of EO units were more toxic than the aqueous solutions of pure surfactants. Moreover, we found that concentration addition was the type of action more likely to occur for mixtures of PGE with lower numbers of EO units with non-ionic surfactants (alkylpolyglucoside and fatty alcohol ethoxylate), whereas for the mixture of PGE with lower EO units and anionic surfactant (ether carboxylic derivative), the most common response type was response addition. In case of mixtures involving amphoteric surfactants and PGEs with the higher numbers of EO units, no clear pattern with regard to the mixture toxicity response type could be observed.

  7. Treatment with exogenous surfactant stimulates endogenous surfactant synthesis in premature infants with respiratory distress syndrome

    NARCIS (Netherlands)

    Bunt, JEH; Carnielli, VP; Janssen, DJ; Wattimena, JLD; Hop, WC; Sauer, PJ; Zimmermann, LJI

    2000-01-01

    Objective: Treatment of preterm infants with respiratory distress syndrome (RDS) with exogenous surfactant has greatly improved clinical outcome. Some infants require multiple doses, and it has not been studied whether these large amounts of exogenous surfactant disturb endogenous surfactant metabol

  8. Electrochemical Oscillations Induced by Surfactants

    Institute of Scientific and Technical Information of China (English)

    翟俊红; 贺占博

    2003-01-01

    A new type of electrochemical oscillation induced by surfactant was observed in experiments. The electrochemical system is a Daniell cell with a copper rod in CuSO4 aqueous and an aluminum rod in Al(NO3)3 aqueous as electrodes. The surfactants are CTAB, TX-100, SLS. The addition of trace surfactant solution by a micro-syringe made the original monotonously changing electrochemical system produce obvious periodic phenomena. At the mean time, the copper ion selective electrode and Hg2SO4 reference electrode were used to monitor the copper electrode reaction and determine its rate constant k of first order reaction. According to the experimental results of electrode reaction kinetics, the possible mechanism was found to be the polarization induced from the directional adsorption of trace surfactant on the electrode surface. That is the electrochemical oscillations.

  9. Emulsification at the Liquid/Liquid Interface: Effects of Potential, Electrolytes and Surfactants.

    Science.gov (United States)

    Chowdhury, Mehrin; Kataky, Ritu

    2016-01-04

    Emulsification of oils at liquid/liquid interfaces is of fundamental importance across a range of applications, including detergency. Adsorption and partitioning of the anionic surface active ions at the interface between two immiscible solutions is known to cause predictable chaos at the transfer potential region of the surfactant. In this work, the phenomenon that leads to the chaotic behaviour shown by sodium dodecylbenzene sulfonate (SDBS) at the water/1,2-dichloroethane interface is applied to commercial surfactants and aqueous/glyceryl trioleate interface. Electrochemical methods, electrocapillary curves, optical microscopy and conductivity measurements demonstrated that at 1.5 mm of SDBS, surfactants are adsorbed at the interface and assemble into micelles, leading to interfacial instability. As the concentration of the anionic surfactant was enhanced to 8 and 13.4 mm, the Marangoni effect and the interfacial emulsification became more prominent. The chaotic behaviour was found to be dependent on the surfactant concentration and the electrolytes present.

  10. Stratum corneum lipid removal by surfactants: relation to in vivo irritation.

    Science.gov (United States)

    Froebe, C L; Simion, F A; Rhein, L D; Cagan, R H; Kligman, A

    1990-01-01

    The relationship between the in vivo irritation potential of sodium lauryl sulfate (SLS) and linear alkyl benzene sulfonate (LAS) and the ability of these two surfactants to remove lipid from the stratum corneum (SC) in vitro were investigated. Either surfactant removes detectable levels of lipids only above its critical micelle concentration (CMC). At high concentrations the surfactants removed only very small amounts of cholesterol, free fatty acid, the esters of those materials, and possibly squalene. SLS and LAS have been shown, below the CMC, to bind to and irritate the SC. Thus, clinical irritation provoked by SLS or LAS is unlikely to be directly linked with extraction of SC lipid. The milder forms of irritation--dryness, tightness, roughness--may involve both surfactant binding to and denaturation of keratin as well as disruption of lipid. Our findings challenge earlier assumptions that surfactants' degreasing of the SC is involved in the induction of erythema.

  11. The Effects of Periodic Wall Stretch on Surfactant and Liquid Transport

    Science.gov (United States)

    Bull, Joseph; Halpern, David; Grotberg, James

    1999-11-01

    The cycle-mean transport of soluble surfactant and airway surface liquid is examined using a mathematical model of Marangoni flows which accounts for airway branching and for time-periodic radial and axial airway stretch. The transport of surfactant and liquid is fundamental to surfactant replacement therapy as well as liquid and surfactant clearance from healthy lungs. The majority of surfactant and liquid transport occurs in the cycle-mean spreading which follows the very brief initial transient spreading phase. We consider either delivery of surfactants into the lung, by setting the proximal boundary condition to a higher concentration compared to the distal boundary condition, or removal from the lung by switching these end conditions. Starting with a steady-state, non-cycled, non-uniform, surfactant distribution we find that transport of surfactant into the lung is enhanced for larger strain amplitudes and frequency, though frequency is less important. For surfactant clearance from the lung we find, as in the case of delivery, that larger strain amplitude enhances transport. But, cycling frequency has the opposite effect with larger frequencies leading to reduced transport. Liquid clearance is enhanced by larger strain amplitudes and slower frequencies. This work supported by NIH grant HL-41126 and NSF grant CTS-9412523.

  12. Solubilization and degradation of perchloroethylene (PCE) in cationic and nonionic surfactant solutions

    Institute of Scientific and Technical Information of China (English)

    Sivaram Harendra; Cumaraswamy Vipulanandan

    2011-01-01

    Solubilization of perchloroethylene (PCE) in a nonionic (Triton X-100) and a cationic (cetyltrimethylammonium bromide (CTAB)) surfactant solutions and the degradation of surfactant solubilized PCE using fine to nanosize Fe and bi-metallic Fe-Ni particles were investigated.Micelle partition coefficients (Km) and molar solubility ratio (MSR) for PCE in 10 g/L of surfactant solutions have been quantified and the solubility of PCE (100 mg/L in water) in the surfactant solutions increased by about ten fold.Of the two surfactants studied,Triton X-100 solubilized the higher amount of PCE per gram of surfactant.To degrade solubilized PCE,both iron and bimetallic Fe-Ni particles were used in continuously stirred batch reactors.The iron and bi-metallic particles were synthesized using the solution method and the particles were characterized using the SEM,EDS,TEM and XRD.The PCE solubilized up to 500 mg/L in both surfactant solutions were totally degraded at various rates by 200 g/L of bi-metallic Fe-Ni particles in less than 20 hr,which is the highest concentration of PCE degraded in the shortest time compared to data in the literature.The degradations of PCE solubilized in surfactant solutions were represented by nonlinear kinetic relationships which depended on the type of surfactant used for solubilizing the PCE.

  13. Surfactant media for constant-current coulometry. Application for the determination of antioxidants in pharmaceuticals

    Energy Technology Data Exchange (ETDEWEB)

    Ziyatdinova, Guzel, E-mail: Ziyatdinovag@mail.ru [Analytical Chemistry Department, A.M. Butlerov Institute of Chemistry, Kazan (Volga Region) Federal University, Kremlyevskaya, 18, Kazan 420008 (Russian Federation); Ziganshina, Endzhe; Budnikov, Herman [Analytical Chemistry Department, A.M. Butlerov Institute of Chemistry, Kazan (Volga Region) Federal University, Kremlyevskaya, 18, Kazan 420008 (Russian Federation)

    2012-09-26

    Highlights: Black-Right-Pointing-Pointer Applicability of surfactants in constant-current coulometry is shown for the first time. Black-Right-Pointing-Pointer Reactions of antioxidants with electrogenerated titrants in surfactant media are investigated. Black-Right-Pointing-Pointer Water insoluble antioxidants can be determined in water media with addition of surfactants. Black-Right-Pointing-Pointer Coulometric determination of antioxidants in pharmaceutical dosage forms using surfactants media is developed. - Abstract: Effect of surfactant presence on electrochemical generation of titrants has been evaluated and discussed for the first time. Cationic (1-dodecylpyridinium and cetylpyridinium bromide), anionic (sodium dodecyl sulfate) and nonionic (Triton X100 and Brij{sup Registered-Sign} 35) surfactants as well as nonionic high molecular weight polymer (PEG 4000) do not react with the electrogenerated bromine, iodine and hexacyanoferrate(III) ions. The electrogenerated chlorine chemically interact with Triton X100 and Brij{sup Registered-Sign} 35. The allowable range of surfactants concentrations providing 100% current yield has been found. Chain-breaking low molecular weight antioxidants (ascorbic acid, rutin, {alpha}-tocopherol and retinol) were determined by reaction with the electrogenerated titrants in surfactant media. Nonionic and cationic surfactants can be used for the determination of antioxidants by reaction with the electrogenerated halogens. On contrary, cationic surfactants gives significantly overstated results of antioxidants determination with electrogenerated hexacyanoferrate(III) ions. The use of surfactants in coulometry of {alpha}-tocopherol and retinol provides their solubilization and allows to perform titration in water media. Simple, express and reliable coulometric approach for determination of {alpha}-tocopherol, rutin and ascorbic acid in pharmaceuticals using surfactant media has been developed. The relative standard deviation of the

  14. Adsorption of surfactants on sand surface in enhanced oil recovery: Isotherms, kinetics and thermodynamic studies

    Energy Technology Data Exchange (ETDEWEB)

    Bera, Achinta; Kumar, T.; Ojha, Keka; Mandal, Ajay, E-mail: mandal_ajay@hotmail.com

    2013-11-01

    Adsorption of surfactants onto reservoir rock surface may result in the loss and reduction of their concentrations in surfactant flooding, which may render them less efficient or ineffective in practical applications of enhanced oil recovery (EOR) techniques. Surfactant flooding for EOR received attraction due to its ability to increase the displacement efficiency by lowering the interfacial tension between oil and water and mobilizing the residual oil. This article highlights the adsorption of surfactants onto sand surface with variation of different influencing factors. It has been experimentally found that adsorption of cationic surfactant on sand surface is more and less for anionic surfactant, while non-ionic surfactant shows intermediate behaviour. X-ray diffraction (XRD) study of clean sand particles has been made to determine the main component present in the sand particles. The interaction between sand particles and surfactant has been studied by Fourier Transform Infrared (FTIR) Spectroscopy of the sand particles before and after aging with surfactant. Salinity plays an important role in adsorption of anionic surfactant. Batch experiments were also performed to understand the effects of pH and adsorbent dose on the sorption efficiency. The sand particles exhibited high adsorption efficiency at low pH for anionic and nonionic surfactants. But opposite trend was found for cationic surfactant. Adsorption data were analyzed by fitting with Langmuir, Freundlich, Redlich-Peterson, and Sips isotherm models. Results show that the Langmuir isotherm and pseudo-second order kinetics models suit the equilibrium and kinetics of adsorption on sand surface. Thermodynamics feasibility of the adsorption process was also studied to verify the spontaneity of the process.

  15. Mechanistic study of wettability alteration of oil-wet sandstone surface using different surfactants

    Energy Technology Data Exchange (ETDEWEB)

    Hou, Bao-feng, E-mail: hbf370283@163.com; Wang, Ye-fei; Huang, Yong

    2015-03-01

    Graphical abstract: Zeta potential of oil-wet quartz powder treated with different surfactants at different concentrations. - Highlights: • Mechanisms of wettability alteration during surfactant flooding were studied. • Different analytical instruments were used to study sandstone wettability alteration. • Surfactants’ structure plays a great role in wettability alteration of solid surface. • CTAB irreversibly desorbs carboxylic acid from solid surface by ionic interaction. • Cationic surfactant is more effective in wettability alteration of sandstone surface. - Abstract: Different analytical methods including Fourier transform infrared (FTIR), atomic force microscopy (AFM), zeta potential measurements, contact angle measurements and spontaneous imbibition tests were utilized to make clear the mechanism for wettability alteration of oil-wet sandstone surface using different surfactants. Results show that among three types of surfactants including cationic surfactants, anionic surfactants and nonionic surfactants, the cationic surfactant CTAB demonstrates the best effect on the wettability alteration of oil-wet sandstone surface. The positively charged head groups of CTAB molecules and carboxylic acid groups from crude oil could interact to form ion pairs, which could be desorbed from the solid surface and solubilized into the micelle formed by CTAB. Thus, the water-wetness of the solid surface is improved. Nonionic surfactant TX-100 could be adsorbed on oil-wet sandstone surface through hydrogen bonds and hydrophobic interaction to alter the wettability of oil-wet solid surface. The wettability alteration of oil-wet sandstone surface using the anionic surfactant POE(1) is caused by hydrophobic interaction. Due to the electrostatic repulsion between the anionic surfactant and the negatively charged surface, POE(1) shows less effect on the wettability alteration of oil-wet sandstone surface.

  16. Surfactant/detergent titration analysis method and apparatus for machine working fluids, surfactant-containing wastewater and the like

    Science.gov (United States)

    Smith, D.D.; Hiller, J.M.

    1998-02-24

    The present invention is an improved method and related apparatus for quantitatively analyzing machine working fluids and other aqueous compositions such as wastewater which contain various mixtures of cationic, neutral, and/or anionic surfactants, soluble soaps, and the like. The method utilizes a single-phase, non-aqueous, reactive titration composition containing water insoluble bismuth nitrate dissolved in glycerol for the titration reactant. The chemical reaction of the bismuth ion and glycerol with the surfactant in the test solutions results in formation of micelles, changes in micelle size, and the formation of insoluble bismuth soaps. These soaps are quantified by physical and chemical changes in the aqueous test solution. Both classical potentiometric analysis and turbidity measurements have been used as sensing techniques to determine the quantity of surfactant present in test solutions. This method is amenable to the analysis of various types of new, in-use, dirty or decomposed surfactants and detergents. It is a quick and efficient method utilizing a single-phase reaction without needing a separate extraction from the aqueous solution. It is adaptable to automated control with simple and reliable sensing methods. The method is applicable to a variety of compositions with concentrations from about 1% to about 10% weight. It is also applicable to the analysis of waste water containing surfactants with appropriate pre-treatments for concentration. 1 fig.

  17. Surfactant/detergent titration analysis method and apparatus for machine working fluids, surfactant-containing wastewater and the like

    Science.gov (United States)

    Smith, Douglas D.; Hiller, John M.

    1998-01-01

    The present invention is an improved method and related apparatus for quantitatively analyzing machine working fluids and other aqueous compositions such as wastewater which contain various mixtures of cationic, neutral, and/or anionic surfactants, soluble soaps, and the like. The method utilizes a single-phase, non-aqueous, reactive titration composition containing water insoluble bismuth nitrate dissolved in glycerol for the titration reactant. The chemical reaction of the bismuth ion and glycerol with the surfactant in the test solutions results in formation of micelles, changes in micelle size, and the formation of insoluble bismuth soaps. These soaps are quantified by physical and chemical changes in the aqueous test solution. Both classical potentiometric analysis and turbidity measurements have been used as sensing techniques to determine the quantity of surfactant present in test solutions. This method is amenable to the analysis of various types of new, in-use, dirty or decomposed surfactants and detergents. It is a quick and efficient method utilizing a single-phase reaction without needing a separate extraction from the aqueous solution. It is adaptable to automated control with simple and reliable sensing methods. The method is applicable to a variety of compositions with concentrations from about 1% to about 10% weight. It is also applicable to the analysis of waste water containing surfactants with appropriate pre-treatments for concentration.

  18. Size separation of analytes using monomeric surfactants

    Science.gov (United States)

    Yeung, Edward S.; Wei, Wei

    2005-04-12

    A sieving medium for use in the separation of analytes in a sample containing at least one such analyte comprises a monomeric non-ionic surfactant of the of the general formula, B-A, wherein A is a hydrophilic moiety and B is a hydrophobic moiety, present in a solvent at a concentration forming a self-assembled micelle configuration under selected conditions and having an aggregation number providing an equivalent weight capable of effecting the size separation of the sample solution so as to resolve a target analyte(s) in a solution containing the same, the size separation taking place in a chromatography or electrophoresis separation system.

  19. Persurf, a New Method to Improve Surfactant Delivery: A Study in Surfactant Depleted Rats

    OpenAIRE

    2012-01-01

    PURPOSE: Exogenous surfactant is not very effective in adults with ARDS, since surfactant does not reach atelectatic alveoli. Perfluorocarbons (PFC) can recruit atelectatic areas but do not replace impaired endogenous surfactant. A surfactant-PFC-mixture could combine benefits of both therapies. The aim of the proof-of-principal-study was to produce a PFC-in-surfactant emulsion (Persurf) and to test in surfactant depleted Wistar rats whether Persurf achieves I.) a more homogenous pulmonary di...

  20. Dielectrophoresis of a surfactant-laden viscous drop

    Science.gov (United States)

    Mandal, Shubhadeep; Bandopadhyay, Aditya; Chakraborty, Suman

    2016-06-01

    The dielectrophoresis of a surfactant-laden viscous drop in the presence of non-uniform DC electric field is investigated analytically and numerically. Considering the presence of bulk-insoluble surfactants at the drop interface, we first perform asymptotic solution for both low and high surface Péclet numbers, where the surface Péclet number signifies the strength of surface convection of surfactants as compared to the diffusion at the drop interface. Neglecting fluid inertia and interfacial charge convection effects, we obtain explicit expression for dielectrophoretic drop velocity for low and high Péclet numbers by assuming small deviation of drop shape from sphericity and small deviation of surfactant concentration from the equilibrium uniform distribution. We then depict a numerical solution, assuming spherical drop, for arbitrary values of Péclet number. Our analyses demonstrate that the asymptotic solution shows excellent agreement with the numerical solution in the limiting conditions of low and high Péclet numbers. The present analysis shows that the flow-induced redistribution of the surfactants at the drop interface generates Marangoni stress, owing to the influence of the surfactant distribution on the local interfacial tension, at the drop interface and significantly alters the drop velocity at steady state. For a perfectly conducting/dielectric drop suspended in perfectly dielectric medium, Marangoni stress always retards the dielectrophoretic velocity of the drop as compared with a surfactant-free drop. For a leaky dielectric drop suspended in another leaky dielectric medium, in the low Péclet number limit, depending on the electrical conductivity and permittivity of both the liquids, the Marangoni stress may aid or retard the dielectrophoretic velocity of the drop. The Marangoni stress also has the ability to move the drop in the opposite direction as compared with a surfactant-free drop. This non-intuitive reverse motion of the drop is

  1. Effect of a commercial alcohol ethoxylate surfactant (C11-15E7) on biodegradation of phenanthrene in a saline water medium by Neptunomonas naphthovorans.

    Science.gov (United States)

    Li, Jing-Liang; Bai, Renbi

    2005-02-01

    Biodegradation of poorly soluble polycyclic aromatic hydrocarbons (PAHs) has been a challenge in bioremediation. In recent years, surfactant-enhanced bioremediation of PAH contaminants has attracted great attention in research. In this study, biodegradation of phenanthrene as a model PAHs solubilized in saline micellar solutions of a biodegradable commercial alcohol ethoxylate nonionic surfactant was investigated. The critical micelle concentration (CMC) of the surfactant and its solubilization capacity for phenanthrene were examined in an artificial saline water medium, and a type of marine bacteria, Neptunomonas naphthovorans, was studied for the biodegradation of phenanthrene solubilized in the surfactant micellar solutions of the saline medium. It is found that the solubility of phenanthrene in the surfactant micellar solutions increased linearly with the surfactant concentrations, but, at a fixed phenanthrene concentration, the biodegradability of phenanthrene in the micellar solutions decreased with the increase of the surfactant concentrations. This was attributed to the reduced bioavailability of phenanthrene, due to its increased solubilization extent in the micellar phase and possibly lowered mass transfer rate from the micellar phase into the aqueous phase or into the bacterial cells. In addition, an inhibitory effect of the surfactant on the bacterial growth at high surfactant concentrations may also play a role. It is concluded that the surfactant largely enhanced the solubilization of phenanthrene in the saline water medium, but excess existence of the surfactant in the medium should be minimized or avoided for the biodegradation of phenanthrene by Neptunomonas naphthovorans.

  2. 1.6 μm DIAL Measurement and Back Trajectory Analysis of CO2 Concentration Profiles in the Lower-Atmosphere

    Science.gov (United States)

    Shibata, Y.; Nagasawa, C.; Abo, M.

    2016-12-01

    Carbon dioxide (CO2) is the primary greenhouse gas emitted through human activities. In addition to the ground level CO2 network, vertical CO2 concentration profiles also play an important role for the estimation of the carbon budget and global warming in the inversion method. Especially, for the detailed analysis of forest carbon dynamics and CO2 fluxes of urban area, vertical CO2 concentration profiles with high spatial and temporal resolution in the lower atmosphere have been conducted by a differential absorption lidar (DIAL). We have observed several vertical profiles of CO2 concentrations for nighttime and daytime from 0.25 to 2.5 km altitude with range resolution of 300 m and integration time of 1 hour. In order to extract information on the origin of the CO2 masses, one day back trajectories were calculated by using a three dimensional (3-D) atmospheric transport model. In many cases, CO2 low concentration layers of over 1.5km altitude were flown by westerly winds from the forest. In another case, high concentration layers of CO2 were flown from the urban areas. As the spectra of absorption lines of any molecules are influenced basically by the temperature in the atmosphere, laser beams of three wavelengths around a CO2 absorption spectrum are transmitted alternately to the atmosphere for simultaneous measurements of CO2 concentration and temperature profiles. Moreover, a few processing algorithms of CO2-DIAL are also performed for improvement of measurement accuracy. For computation of trajectories and drawing their figures, the JRA-25 data provided by the cooperative research project for the JRA-25 long-term reanalysis of the Japan Meteorological Agency (JMA) and the Central Research Institute of Electric Power Industry (CRIEPI) and the NIPR trajectory model (Tomikawa and Sato, 2005; http://firp-nitram.nipr.ac.jp) were used. This work was financially supported by the System Development Program for Advanced Measurement and Analysis of the Japan Science and

  3. A direct detection 1.6μm DIAL with three wavelengths for high accuracy measurements of vertical CO2 concentration and temperature profiles

    Science.gov (United States)

    Shibata, Yasukuni; Nagasawa, Chikao; Abo, Makoto

    2013-10-01

    The accurate vertical CO2 profiles in the troposphere are highly desirable in the inverse techniques to improve quantification and understanding of the global budget of CO2 and also global climate changes. Moreover, wind information is an important parameter for transport simulations and inverse estimation of surface CO2 flux. A differential absorption lidar (DIAL) is an attractive method for obtaining vertical CO2 profiles and we have developed an 1.6μm DIAL system to perform simultaneous measurements of CO2 concentration, atmospheric temperature profile and wind profile. The absorption cross sections of gas and air density depends on atmospheric temperature and pressure. Then precise temperature and pressure profiles are necessary for accurate CO2 mixing ratio measurement by DIAL. Laser beams of three wavelengths around a CO2 absorption line are transmitted alternately to the atmosphere for simultaneous measurements of CO2 concentration and temperature. The receiving optics include the near-infrared photomultiplier tube and a fiber Bragg grating (FBG) filter to detect a Doppler shift.

  4. Effect of surfactant hydrophile-lipophile balance (HLB) value on mineral oxide charging in apolar media.

    Science.gov (United States)

    Gacek, Matthew Michael; Berg, John C

    2015-07-01

    The current work examines the role of surfactant hydrophile-lipophile balance (HLB) on the ability for surfactant reverse micelles to impart charge to particles dispersed in an apolar medium, a study motivated by a number of applications that seek to maximize particle charge in such systems. Previous investigations have shown that relative acid-base properties of the particles and surfactants, as well as surfactant concentration and trace water content, all play a major role in the particle charge obtained. However, the ability of a surfactant to stabilize charge in reverse micelles is also an important aspect of creating charge on a particle surface. It has been previously shown that surfactant HLB value is an important parameter in assessing the size of the polar core of the reverse micelles, thereby impacting the total charge that is generated in the bulk solution as determined by conductivity. In the current study, this theory is extended to investigate the impact on particle charging. To accomplish this, the electrophoretic mobility is determined for a series of mineral oxides dispersed in Isopar-L with either Span 20, Span 80, or Span 85. These three surfactants all have the same head group chemistry, but their HLB value ranges from 1.8 to 8.6. It is found that the maximum observed particle electrophoretic mobility does scale directly with the HLB of the accompanying surfactant. This indicates that there is a direct correlation between a surfactant's ability to stabilize charge and its ability to impart charge to a particle. However, the largest HLB surfactant, Span 20, also exhibited a large amount of charge screening or neutralization at larger surfactant concentrations. This highlights the competition between particle charging and micelle-micelle charging that remains one of the largest obstacles to maximizing particle charge in apolar systems.

  5. Evaporation of Sessile Droplets Laden with Particles and Insoluble Surfactants.

    Science.gov (United States)

    Karapetsas, George; Chandra Sahu, Kirti; Matar, Omar K

    2016-07-12

    We consider the flow dynamics of a thin evaporating droplet in the presence of an insoluble surfactant and noninteracting particles in the bulk. On the basis of lubrication theory, we derive a set of evolution equations for the film height, the interfacial surfactant, and bulk particle concentrations, taking into account the dependence of liquid viscosity on the local particle concentration. An important ingredient of our model is that it takes into account the fact that the surfactant adsorbed at the interface hinders evaporation. We perform a parametric study to investigate how the presence of surfactants affects the evaporation process as well as the flow dynamics with and without the presence of particles in the bulk. Our numerical calculations show that the droplet lifetime is affected significantly by the balance between the ability of the surfactant to enhance spreading, suppressing the effect of thermal Marangoni stresses-induced motion, and to hinder the evaporation flux through the reduction of the effective interfacial area of evaporation, which tend to accelerate and decelerate the evaporation process, respectively. For particle-laden droplets and in the case of dilute solutions, the droplet lifetime is found to be weakly dependent on the initial particle concentration. We also show that the particle deposition patterns are influenced strongly by the direct effect of the surfactant on the evaporative flux; in certain cases, the "coffee-stain" effect is enhanced significantly. A discussion of the delicate interplay between the effects of capillary pressure and solutal and thermal Marangoni stresses, which drive the liquid flow inside of the evaporating droplet giving rise to the observed results, is provided herein.

  6. Remote sensing of temperature and concentration profiles of a gas jet by coupling infrared emission spectroscopy and LIDAR for characterization of aircraft engine exhaust

    Science.gov (United States)

    Offret, J.-P.; Lebedinsky, J.; Navello, L.; Pina, V.; Serio, B.; Bailly, Y.; Hervé, P.

    2015-05-01

    Temperature data play an important role in the combustion chamber since it determines both the efficiency and the rate of pollutants emission of engines. Air pollution problem concerns the emissions of gases such as CO, CO2, NO, NO2, SO2 and also aerosols, soot and volatile organic compounds. Flame combustion occurs in hostile environments where temperature and concentration profiles are often not easy to measure. In this study, a temperature and CO2 concentration profiles optical measurement method, suitable for combustion analysis, is discussed and presented. The proposed optical metrology method presents numerous advantages when compared to intrusive methods. The experimental setup comprises a passive radiative emission measurement method combined with an active laser-measurement method. The passive method is based on the use of gas emission spectroscopy. The experimental spectrometer device is coupled with an active method. The active method is used to investigate and correct complex flame profiles. This method similar to a LIDAR (Light Detection And Ranging) device is based on the measurement of Rayleigh scattering of a short laser pulse recorded using a high-speed streak camera. The whole experimental system of this new method is presented. Results obtained on a small-scale turbojet are shown and discussed in order to illustrate the potentials deliver by the sophisticated method. Both temperature and concentration profiles of the gas jet are presented and discussed.

  7. Concentration and speciation of antimony and arsenic in soil profiles around the world's largest antimony metallurgical area in China.

    Science.gov (United States)

    Yang, Hailin; He, Mengchang; Wang, Xiangqin

    2015-02-01

    Mining and smelting activities contribute large amounts of heavy metal pollution to the environment. In this study, four 75- or 80-cm-deep soil profiles in the vicinity of the Xikuangshan Sb smelter were sampled and studied by combination of bulk chemical analysis, sequential extraction procedure, and speciation analysis of Sb and As, which are in order to assess the vertical mobility of metal/metalloid contaminants (Sb, As, Cd, and Hg). The heavy contamination in the soil profiles is mostly located in the uppermost soil layers enriched in organic matter (soil profiles. Sb and As, being substantially bound in the exchangeable fractions by sequential extraction studies, showed significant mobility in the profiles. Sb(III), Sb(V), As(III), and As(V) were found in all of the soil samples, and certain methylated states of Sb (TMSb) and As (MMA, DMA) were also present in the lower layer soil samples.

  8. Evaporation of droplets of surfactant solutions.

    Science.gov (United States)

    Semenov, Sergey; Trybala, Anna; Agogo, Hezekiah; Kovalchuk, Nina; Ortega, Francisco; Rubio, Ramón G; Starov, Víctor M; Velarde, Manuel G

    2013-08-13

    The simultaneous spreading and evaporation of droplets of aqueous trisiloxane (superspreader) solutions onto a hydrophobic substrate has been studied both experimentally, using a video-microscopy technique, and theoretically. The experiments have been carried out over a wide range of surfactant concentration, temperature, and relative humidity. Similar to pure liquids, four different stages have been observed: the initial one corresponds to spreading until the contact angle, θ, reaches the value of the static advancing contact angle, θad. Duration of this stage is rather short, and the evaporation during this stage can be neglected. The evaporation is essential during the next three stages. The next stage after the spreading, which is referred to herein as the first stage, takes place at constant perimeter and ends when θ reaches the static receding contact angle, θr. During the next, second stage, the perimeter decreases at constant contact angle θ = θr for surfactant concentration above the critical wetting concentration (CWC). The static receding contact angle decreases during the second stage for concentrations below CWC because the concentration increases due to the evaporation. During the final stage both the perimeter and the contact angle decrease. In what follows, we consider only the longest stages I and II. The developed theory predicts universal curves for the contact angle dependency on time during the first stage, and for the droplet perimeter on time during the second stage. A very good agreement between theory and experimental data has been found for the first stage of evaporation, and for the second stage for concentrations above CWC; however, some deviations were found for concentrations below CWC.

  9. The Determination of Anionic Surfactants in Natural and Waste Waters.

    Science.gov (United States)

    Crisp, P. T.; And Others

    1983-01-01

    Background information, procedures, and results of an experiment suitable for measuring subpart per million concentrations of anionic surfactants in natural waters and waste effluents are provided. The experiment required only a spectrophotometer or filter photometer and has been successfully performed by students in an undergraduate environmental…

  10. The Determination of Anionic Surfactants in Natural and Waste Waters.

    Science.gov (United States)

    Crisp, P. T.; And Others

    1983-01-01

    Background information, procedures, and results of an experiment suitable for measuring subpart per million concentrations of anionic surfactants in natural waters and waste effluents are provided. The experiment required only a spectrophotometer or filter photometer and has been successfully performed by students in an undergraduate environmental…

  11. Phase behavior and shear alignment in SWNT-surfactant dispersions.

    Science.gov (United States)

    Nativ-Roth, Einat; Yerushalmi-Rozen, Rachel; Regev, Oren

    2008-09-01

    The effect of single-walled carbon nanotubes (SWNT) on the phase behavior of the cationic surfactant cetyltrimethylammonium bromide (CTAB) in aqueous solutions is investigated at room temperature. Small-angle X-ray scattering (SAXS) and cryogenic transmission electron microscopy (cryo-TEM) are used for characterization of bulk dispersions and nanometrically thin films. Additional carbonaceous additives (fullerenes, multi-walled carbon nanotubes, and carbon black) serve as reference systems. It is found that dispersions of carbonaceous additive (excluding fullerenes) at intermediate surfactant concentrations (below the liquid-crystalline region of the native surfactant) induce demixing and macroscopic phase separation in otherwise homogeneous solutions of CTAB. Two coexisting liquid phases of similar CTAB concentrations are observed, with the carbonaceous species residing within the lower phase. At high CTAB concentrations (liquid-crystal region) the SWNTs are found to incorporate into the ordered lyotropic liquid-crystalline phase while preserving the native d-spacing. Investigation of nanometrically thin films at intermediate surfactant concentrations under external shear reveals shear-induced structure (SIS) in the presence of minute amounts of SWNTs. The effect is found to be exclusive to SWNT and does not occur in dispersions of other carbonaceous additives.

  12. Biomimicry of surfactant protein C.

    Science.gov (United States)

    Brown, Nathan J; Johansson, Jan; Barron, Annelise E

    2008-10-01

    Since the widespread use of exogenous lung surfactant to treat neonatal respiratory distress syndrome, premature infant survival and respiratory morbidity have dramatically improved. Despite the effectiveness of the animal-derived surfactant preparations, there still remain some concerns and difficulties associated with their use. This has prompted investigation into the creation of synthetic surfactant preparations. However, to date, no clinically used synthetic formulation is as effective as the natural material. This is largely because the previous synthetic formulations lacked analogues of the hydrophobic proteins of the lung surfactant system, SP-B and SP-C, which are critical functional constituents. As a result, recent investigation has turned toward the development of a new generation of synthetic, biomimetic surfactants that contain synthetic phospholipids along with a mimic of the hydrophobic protein portion of lung surfactant. In this Account, we detail our efforts in creating accurate mimics of SP-C for use in a synthetic surfactant replacement therapy. Despite SP-C's seemingly simple structure, the predominantly helical protein is extraordinarily challenging to work with given its extreme hydrophobicity and structural instability, which greatly complicates the creation of an effective SP-C analogue. Drawing inspiration from Nature, two promising biomimetic approaches have led to the creation of rationally designed biopolymers that recapitulate many of SP-C's molecular features. The first approach utilizes detailed SP-C structure-activity relationships and amino acid folding propensities to create a peptide-based analogue, SP-C33. In SP-C33, the problematic and metastable polyvaline helix is replaced with a structurally stable polyleucine helix and includes a well-placed positive charge to prevent aggregation. SP-C33 is structurally stable and eliminates the association propensity of the native protein. The second approach follows the same design

  13. Marangoni Effects of a Drop in an Extensional Flow: The Role of Surfactant Physical Chemistry

    Science.gov (United States)

    Stebe, Kathleen J.; Balasubramaniam, R. (Technical Monitor)

    2002-01-01

    While the changes in stresses caused by surfactant adsorption on non-deforming interfaces have been fairly well established, prior to this work, there were few studies addressing how surfactants alter stresses on strongly deforming interfaces. We chose the model problem of a drop in a uniaxial extensional flow to study these stress conditions To model surfactant effects at fluid interfaces, a proper description of the dependence of the surface tension on surface concentration, the surface equation of state, is required. We have adopted a surface equation of state that accounts for the maximum coverage limit; that is, because surfactants have a finite cross sectional area, there is an upper bound to the amount of surfactant that can adsorb in a monolayer. The surface tension reduces strongly only when this maximum coverage is approached. Since the Marangoni stresses go as the derivative of the surface equation of state times the surface concentration gradient, the non-linear equation of state determines both the effect of surfactants in the normal stress jump, (which is balanced by the product of the mean curvature of the interface times the surface tension), and the tangential stress jump, which is balanced by Marangoni stresses. First, the effects of surface coverage and intermolecular interactions among surfactants which drive aggregation of surfactants in the interface were studied. (see Pawar and Stebe, Physics of Fluids).

  14. Desorption of two organophosphorous pesticides from soil with wastewater and surfactant solutions.

    Science.gov (United States)

    Hernández-Soriano, M C; Mingorance, M D; Peña, A

    2012-03-01

    A batch test was used to evaluate the extent of desorption of diazinon and dimethoate, preadsorbed on a calcareous agricultural soil, representative of the Mediterranean area. Urban wastewater from a secondary treatment and seven surfactant solutions, at concentrations ranging from 0.75 mg L(-1) to 10 gL(-1), were used. The surfactants assayed were cationic (hexadecyl trimethyl ammonium bromide (HD)), anionic (sodium dodecyl sulfate (SDS), Aerosol 22 (A22) and Biopower (BP)), and nonionic (Tween 80 (TW), Triton X 100 (TX) and Glucopon 600 (G600)). Desorption of dimethoate was either not affected or only slightly by the nonionic and anionic surfactants tested, while desorption of diazinon from the soil was only enhanced by A22, BP and TW. This desorption increase correlated significantly with the surfactant concentration of the solution used for desorption and with the concurrent increase in the supernatant of the dissolved organic carbon, in particular that originating from the surfactant. This parameter did not vary with the use of SDS, G600 and TX. The cationic surfactant HD was retained on the soil surface, as confirmed by an increase in soil organic carbon, resulting in a fall in desorption rate for both pesticides. Comparing treatment by wastewater with control water, there was no difference in desorption rate for either pesticide. Mixed TW/anionic surfactant solutions either did not modify or slightly increased desorption of both pesticides in comparison with individual surfactant solutions.

  15. Surfactant and metal ion effects on the mechanical properties of alginate hydrogels.

    Science.gov (United States)

    Kaygusuz, Hakan; Evingür, Gülşen Akın; Pekcan, Önder; von Klitzing, Regine; Erim, F Bedia

    2016-11-01

    This paper addresses the controlled variation of the mechanical properties of alginate gel beads by changing the alginate concentration or by adding different surfactants or cross-linking cations. Alginate beads containing nonionic Brij 35 or anionic sodium dodecyl sulfate (SDS) surfactants were prepared with two different types of cations (Ca(2+), Ba(2+)) as crosslinkers. Compression measurements were performed to investigate the effect of the surfactant and cation types and their concentrations on the Young's modulus of alginate beads. The Young's modulus was determined by using Hertz theory. For all types of alginate gel beads the Young's modulus showed an increasing value for increasing alginate contents. Addition of the anionic surfactant SDS increases the Young's modulus of the alginate beads while the addition of non-ionic surfactant Brij 35 leads to a decrease in Young's modulus. This opposite behavior is related to the contrary effect of both surfactants on the charge of the alginate beads. When Ba(2+) ions were used as crosslinker cation, the Young's modulus of the beads with the surfactant SDS was found to be approximately two times higher than the modulus of beads with the surfactant Brij 35. An ion specific effect was found for the crosslinking ability of divalent cations.

  16. Enhancing plant-microbe associated bioremediation of phenanthrene and pyrene contaminated soil by SDBS-Tween 80 mixed surfactants.

    Science.gov (United States)

    Ni, Hewei; Zhou, Wenjun; Zhu, Lizhong

    2014-05-01

    The use of surfactants to enhance plant-microbe associated dissipation in soils contaminated with polycyclic aromatic hydrocarbons (PAHs) is a promising bioremediation technology. This comparative study was conducted on the effects of plant-microbe treatment on the removal of phenanthrene and pyrene from contaminated soil, in the presence of low concentration single anionic, nonionic and anionic-nonionic mixed surfactants. Sodium dodecyl benzene sulfonate (SDBS) and Tween 80 were chosen as representative anionic and nonionic surfactants, respectively. We found that mixed surfactants with concentrations less than 150 mg/kg were more effective in promoting plant-microbe associated bioremediation than the same amount of single surfactants. Only about (m/m) of mixed surfactants was needed to remove the same amount of phenanthrene and pyrene from either the planted or unplanted soils, when compared to Tween 80. Mixed surfactants (Tween 80. These results may be explained by the lower sorption loss and reduced interfacial tension of mixed surfactants relative to Tween 80, which enhanced the bioavailability of PAHs in soil and the microbial degradation efficiency. The higher remediation efficiency of low dosage SDBS-Tween 80 mixed surfactants thus advanced the technology of surfactant-enhanced plant-microbe associated bioremediation.

  17. Novel Piperazine-based Gemini and Bola Surfactants

    Institute of Scientific and Technical Information of China (English)

    Qing Shan ZHANG; Hui Miao ZHANG; Bing Nan GUO

    2006-01-01

    A series of piperazine-based Gemini and Bola surfactants were synthesized. Gemini 1and 5 have well surface activities. Their critical micelle concentrations (cmc) is 6.47×10-4 mol/L and 1.17×10-3 mol/L, respectively. Bola surfactants 2 and compound 3, possessing better water solubility, have lower surface activities. Calculation, carried out by MM2 energy minimization,showed that compound with more hydrophobic chains in a spacer of limited length is difficult to be synthesized.

  18. The effect of long term under- and over-feeding of sheep on milk and plasma fatty acid profiles and on insulin and leptin concentrations.

    Science.gov (United States)

    Tsiplakou, Eleni; Chadio, Stella; Zervas, George

    2012-05-01

    Since sheep's milk is mainly used for cheese making and milk chemical composition and fatty acids (FA) profile affect cheese yield and quality, the objective of this study was to determine the effects of different feeding levels on milk chemical composition and FA profile, as well as on plasma FA profile, and on insulin and leptin concentrations. Twenty-four sheep were assigned to three homogeneous sub-groups. Throughout the experimental period each group was fed the same diet but in quantities which met 70% (under-feeding), 100% (control) and 130% (over-feeding) of their respective energy and crude protein requirements. The results showed that the underfed sheep had higher milk fat content compared with overfed. In blood plasma the concentrations of C18:0 and C18:1 in the underfed sheep were significantly higher compared with control and overfed sheep. The concentrations of leptin and insulin were significantly higher in overfed compared with underfed sheep. Underfeeding reduced the concentrations of short chain FA (SCFA) and medium chain FA (MCFA) and increased that of C18:0 and mono unsaturated FA (MUFA) in sheep milk fat compared with controls and overfed. The concentrations of C18:0, long chain FA (LCFA) and monounsaturated FA (MUFA) in milk were significantly higher and those of SCFA, MCFA and saturated FA (SFA) significantly lower in the underfed compared with the overfed sheep. In conclusion, long term under- and over-feeding affected the sheep milk chemical composition and FA profile which consequently has an impact on milk products yield (cheese and yogurt) and quality (human health).

  19. Surfactant-enhanced desorption and biodegradation of polycyclic aromatic