WorldWideScience

Sample records for surfaces ileana iftimia

  1. Surface Water & Surface Drainage

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — This data set contains boundaries for all surface water and surface drainage for the state of New Mexico. It is in a vector digital data structure digitized from a...

  2. Ileana Diéguez. 'Cuerpos sin duelo. Iconografía y teatralidad del dolor'. Córdoba (Arg.: Ediciones DocumentA/Escénicas, 2013.

    Directory of Open Access Journals (Sweden)

    Tatiana Bubnova

    2016-06-01

    Full Text Available Cuerpos sin duelo. Iconografía y teatralidad del dolor es un libro estupendamente escrito y académicamente riguroso. Al mismo tiempo es un libro abominable. Lo es porque trata de una manera anatómica, al mismo tiempo que inquietante y reflexiva, aquello que todos sabemos que existe, pero no queremos enterarnos. La cuestión de la estética y del arte actual también es una línea magistral de este libro, problema que se replantea de una manera radical.

  3. Superamphiphobic Surfaces

    NARCIS (Netherlands)

    Cavalli, A.; Mugele, F.; Brutin, David

    2015-01-01

    This chapter discusses recent trends in the development, fabrication, and characterization of superamphiphobic surfaces. An amphiphobic surface repels both polar liquids, such as water, and nonpolar (oily) liquids, and has therefore useful technological application in microfluidics devices, protecti

  4. Rumble surfaces

    CSIR Research Space (South Africa)

    National Institute for Transport and Road

    1977-01-01

    Full Text Available Rumble surfaces are intermittent short lengths of coarse-textured road surfacings on which vehicle tyres produce a rumbling sound. used in conjunction with appropriate roadsigns and markings, they can reduce accidents on rural roads by alerting...

  5. Surface analysis.

    Science.gov (United States)

    Kinsella, T

    2006-10-01

    Surface analysis techniques are important tools to use in the verification of surface cleanliness and medical device functionality. How these techniques can be employed and some example applications are described.

  6. Surface reconstructions

    CERN Document Server

    Fisher, David J

    2009-01-01

    It is well-known, even at the most elementary level of scientific knowledge, that free surfaces have properties which make them differ from the underlying bulk material. In the case of liquids, it is common knowledge - even among laymen - that the liquid surface acts as though it were a distinct skin-like material. At a slightly more advanced level, it is known that the liquid surface will seek to minimize its total surface energy by minimizing its surface area; thereby affecting its local vapor-pressure and adsorption behavior. In the case of solids too, it has long been known that different

  7. Surface chemistry

    CERN Document Server

    Desai, KR

    2008-01-01

    The surface Chemistry of a material as a whole is crucially dependent upon the Nature and type of surfaces exposed on crystallites. It is therefore vitally important to independently Study different, well - defined surfaces through surface analytical techniques. In addition to composition and structure of surface, the subject also provides information on dynamic light scattering, micro emulsions, colloid Stability control and nanostructures. The present book endeavour to bring before the reader that the understanding and exploitation of Solid state phenomena depended largely on the ability to

  8. Spherical Surfaces

    DEFF Research Database (Denmark)

    Brander, David

    2015-01-01

    We study surfaces of constant positive Gauss curvature in Euclidean 3-space via the harmonicity of the Gauss map. Using the loop group representation, we solve the regular and the singular geometric Cauchy problems for these surfaces, and use these solutions to compute several new examples. We gi...

  9. Superhydrophobic surfaces

    Science.gov (United States)

    Wang, Evelyn N; McCarthy, Matthew; Enright, Ryan; Culver, James N; Gerasopoulos, Konstantinos; Ghodssi, Reza

    2015-03-24

    Surfaces having a hierarchical structure--having features of both microscale and nanoscale dimensions--can exhibit superhydrophobic properties and advantageous condensation and heat transfer properties. The hierarchical surfaces can be fabricated using biological nanostructures, such as viruses as a self-assembled nanoscale template.

  10. Surface boxplots

    KAUST Repository

    Genton, Marc G.

    2014-01-22

    In this paper, we introduce a surface boxplot as a tool for visualization and exploratory analysis of samples of images. First, we use the notion of volume depth to order the images viewed as surfaces. In particular, we define the median image. We use an exact and fast algorithm for the ranking of the images. This allows us to detect potential outlying images that often contain interesting features not present in most of the images. Second, we build a graphical tool to visualize the surface boxplot and its various characteristics. A graph and histogram of the volume depth values allow us to identify images of interest. The code is available in the supporting information of this paper. We apply our surface boxplot to a sample of brain images and to a sample of climate model outputs.

  11. Surface phonons

    CERN Document Server

    Wette, Frederik

    1991-01-01

    In recent years substantial progress has been made in the detection of surface phonons owing to considerable improvements in inelastic rare gas scattering tech­ niques and electron energy loss spectroscopy. With these methods it has become possible to measure surface vibrations in a wide energy range for all wave vectors in the two-dimensional Brillouin zone and thus to deduce the complete surface phonon dispersion curves. Inelastic atomic beam scattering and electron energy loss spectroscopy have started to play a role in the study of surface phonons similar to the one played by inelastic neutron scattering in the investigation of bulk phonons in the last thirty years. Detailed comparison between experimen­ tal results and theoretical studies of inelastic surface scattering and of surface phonons has now become feasible. It is therefore possible to test and to improve the details of interaction models which have been worked out theoretically in the last few decades. At this point we felt that a concise, co...

  12. Surfacing Moves

    DEFF Research Database (Denmark)

    Lutz, Peter

    2013-01-01

    such as schedules, machines, and aging bodies. To this end, the article also experiments with ‘surfacing’ as an ethnographic heuristic for figuring these different ‘spatial-timings’. The article concludes that surfacing matters not only in senior home care but also in the field-desks of ethnographic analysis....

  13. Attack surfaces

    DEFF Research Database (Denmark)

    Gruschka, Nils; Jensen, Meiko

    2010-01-01

    The new paradigm of cloud computing poses severe security risks to its adopters. In order to cope with these risks, appropriate taxonomies and classification criteria for attacks on cloud computing are required. In this work-in-progress paper we present one such taxonomy based on the notion...... of attack surfaces of the cloud computing scenario participants. © 2010 IEEE....

  14. Surfacing Moves

    DEFF Research Database (Denmark)

    Lutz, Peter

    2013-01-01

    such as schedules, machines, and aging bodies. To this end, the article also experiments with ‘surfacing’ as an ethnographic heuristic for figuring these different ‘spatial-timings’. The article concludes that surfacing matters not only in senior home care but also in the field-desks of ethnographic analysis....

  15. Describing Surfaces.

    Science.gov (United States)

    1985-01-01

    York. Do Carmo , Manfredo P, [1976], Differential Geometry of Curves and Surfaces, Prent- ice-Hall, Englewood Cliffs, NJ. Faugeras, 0. D., et. al, [1982...lightbulb. It is well-known (for exam~ple, do Carmo "" "..-’,.’.V .. .V...i ra I s ; ul ing-.. "’. Figure 11. The helicoid of a single blade. (Reproduced from [do Carmo 1976, Figure 2-27 Page 94]) where m and 1 are assumed

  16. Surface texture metrology for high precision surfaces

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard; Gasparin, Stefania; Tosello, Guido

    2010-01-01

    This paper introduces some of the challenges related to surface texture measurement of high precision surfaces. The paper is presenting two case studies related to polished tool surfaces and micro part surfaces. In both cases measuring instrumentation, measurement procedure and the measurement...

  17. Surface texture metrology for high precision surfaces

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard; Gasparin, Stefania; Tosello, Guido

    2010-01-01

    This paper introduces some of the challenges related to surface texture measurement of high precision surfaces. The paper is presenting two case studies related to polished tool surfaces and micro part surfaces. In both cases measuring instrumentation, measurement procedure and the measurement re...

  18. Toroidal surfaces compared with spherocylindrical surfaces

    Science.gov (United States)

    Malacara-Doblado, Daniel; Malacara-Hernandez, Daniel; Garcia-Marquez, Jorge L.

    1995-08-01

    Toroidal and sphero-cylindrical optical surfaces are two different kinds of surfaces (Menchaca and Malacara, 1986), but they are almost identical in the vicinity of the optical axis. The separation between these two surfaces increases when the distance to the optical axis increases. In this work the separation between these two surfaces outside of the central region is analytically studied.

  19. Representing Quadric Surfaces Using NURBS Surfaces

    Institute of Scientific and Technical Information of China (English)

    秦开怀

    1997-01-01

    A method for representing quadrc surfaces using NURBS is presented.By means of the necessary and sufficient conditons for NURBS curves to precisely represent circular arcs and other conics,quadric surfaces can be represented by NURBS surfaces with fewer control vertices.The method can be used not only for NURBS surface representation of quadric surfaces,but also for rounding polyhedrons.Many examples are given in the paper.

  20. Brain surface parameterization using Riemann surface structure.

    Science.gov (United States)

    Wang, Yalin; Gu, Xianfeng; Hayashi, Kiralee M; Chan, Tony F; Thompson, Paul M; Yau, Shing-Tung

    2005-01-01

    We develop a general approach that uses holomorphic 1-forms to parameterize anatomical surfaces with complex (possibly branching) topology. Rather than evolve the surface geometry to a plane or sphere, we instead use the fact that all orientable surfaces are Riemann surfaces and admit conformal structures, which induce special curvilinear coordinate systems on the surfaces. Based on Riemann surface structure, we can then canonically partition the surface into patches. Each of these patches can be conformally mapped to a parallelogram. The resulting surface subdivision and the parameterizations of the components are intrinsic and stable. To illustrate the technique, we computed conformal structures for several types of anatomical surfaces in MRI scans of the brain, including the cortex, hippocampus, and lateral ventricles. We found that the resulting parameterizations were consistent across subjects, even for branching structures such as the ventricles, which are otherwise difficult to parameterize. Compared with other variational approaches based on surface inflation, our technique works on surfaces with arbitrary complexity while guaranteeing minimal distortion in the parameterization. It also offers a way to explicitly match landmark curves in anatomical surfaces such as the cortex, providing a surface-based framework to compare anatomy statistically and to generate grids on surfaces for PDE-based signal processing.

  1. On surface approximation using developable surfaces

    DEFF Research Database (Denmark)

    Chen, H. Y.; Lee, I. K.; Leopoldseder, s.

    1999-01-01

    We introduce a method for approximating a given surface by a developable surface. It will be either a G(1) surface consisting of pieces of cones or cylinders of revolution or a G(r) NURBS developable surface. Our algorithm will also deal properly with the problems of reverse engineering and produce...... robust approximation of given scattered data. The presented technique can be applied in computer aided manufacturing, e.g. in shipbuilding. (C) 1999 Academic Press....

  2. On surface approximation using developable surfaces

    DEFF Research Database (Denmark)

    Chen, H. Y.; Lee, I. K.; Leopoldseder, S.

    1998-01-01

    We introduce a method for approximating a given surface by a developable surface. It will be either a G_1 surface consisting of pieces of cones or cylinders of revolution or a G_r NURBS developable surface. Our algorithm will also deal properly with the problems of reverse engineering and produce...... robust approximation of given scattered data. The presented technique can be applied in computer aided manufacturing, e.g. in shipbuilding....

  3. Open algebraic surfaces

    CERN Document Server

    Miyanishi, Masayoshi

    2000-01-01

    Open algebraic surfaces are a synonym for algebraic surfaces that are not necessarily complete. An open algebraic surface is understood as a Zariski open set of a projective algebraic surface. There is a long history of research on projective algebraic surfaces, and there exists a beautiful Enriques-Kodaira classification of such surfaces. The research accumulated by Ramanujan, Abhyankar, Moh, and Nagata and others has established a classification theory of open algebraic surfaces comparable to the Enriques-Kodaira theory. This research provides powerful methods to study the geometry and topology of open algebraic surfaces. The theory of open algebraic surfaces is applicable not only to algebraic geometry, but also to other fields, such as commutative algebra, invariant theory, and singularities. This book contains a comprehensive account of the theory of open algebraic surfaces, as well as several applications, in particular to the study of affine surfaces. Prerequisite to understanding the text is a basic b...

  4. PREFACE: Vibrations at surfaces Vibrations at surfaces

    Science.gov (United States)

    Rahman, Talat S.

    2011-12-01

    This special issue is dedicated to the phenomenon of vibrations at surfaces—a topic that was indispensible a couple of decades ago, since it was one of the few phenomena capable of revealing the nature of binding at solid surfaces. For clean surfaces, the frequencies of modes with characteristic displacement patterns revealed how surface geometry, as well as the nature of binding between atoms in the surface layers, could be different from that in the bulk solid. Dispersion of the surface phonons provided further measures of interatomic interactions. For chemisorbed molecules on surfaces, frequencies and dispersion of the vibrational modes were also critical for determining adsorption sites. In other words, vibrations at surfaces served as a reliable means of extracting information about surface structure, chemisorption and overlayer formation. Experimental techniques, such as electron energy loss spectroscopy and helium-atom-surface scattering, coupled with infra-red spectroscopy, were continually refined and their resolutions enhanced to capture subtleties in the dynamics of atoms and molecules at surfaces. Theoretical methods, whether based on empirical and semi-empirical interatomic potential or on ab initio electronic structure calculations, helped decipher experimental observations and provide deeper insights into the nature of the bond between atoms and molecules in regions of reduced symmetry, as encountered on solid surfaces. Vibrations at surfaces were thus an integral part of the set of phenomena that characterized surface science. Dedicated workshops and conferences were held to explore the variety of interesting and puzzling features revealed in experimental and theoretical investigations of surface vibrational modes and their dispersion. One such conference, Vibrations at Surfaces, first organized by Harald Ibach in Juelich in 1980, continues to this day. The 13th International Conference on Vibrations at Surfaces was held at the University of

  5. Surface reconstruction by offset surface filtering

    Institute of Scientific and Technical Information of China (English)

    DONG Chen-shi; WANG Guo-zhao

    2005-01-01

    The problem of computing a piecewise linear approximation to a surface from its sample has been a focus of research in geometry modeling and graphics due to its widespread applications in computer aided design. In this paper, we give a new algorithm, to be called offset surface filtering (OSF) algorithm, which computes a piecewise-linear approximation of a smooth surface from a finite set of cloud points. The algorithm has two main stages. First, the surface normal on every point is estimated by the least squares best fitting plane method. Second, we construct a restricted Delaunay triangulation, which is a tubular neighborhood of the surface defined by two offset surfaces. The algorithm is simple and robust. We describe an implementation of it and show example outputs.

  6. Surfaces with Natural Ridges

    DEFF Research Database (Denmark)

    Brander, David; Markvorsen, Steen

    2015-01-01

    We discuss surfaces with singularities, both in mathematics and in the real world. For many types of mathematical surface, singularities are natural and can be regarded as part of the surface. The most emblematic example is that of surfaces of constant negative Gauss curvature, all of which...

  7. Surfaces with Natural Ridges

    DEFF Research Database (Denmark)

    Brander, David; Markvorsen, Steen

    2015-01-01

    We discuss surfaces with singularities, both in mathematics and in the real world. For many types of mathematical surface, singularities are natural and can be regarded as part of the surface. The most emblematic example is that of surfaces of constant negative Gauss curvature, all of which...

  8. Approximation by Cylinder Surfaces

    DEFF Research Database (Denmark)

    Randrup, Thomas

    1997-01-01

    We present a new method for approximation of a given surface by a cylinder surface. It is a constructive geometric method, leading to a monorail representation of the cylinder surface. By use of a weighted Gaussian image of the given surface, we determine a projection plane. In the orthogonal...

  9. Fast disinfecting antimicrobial surfaces.

    Science.gov (United States)

    Madkour, Ahmad E; Dabkowski, Jeffery M; Nusslein, Klaus; Tew, Gregory N

    2009-01-20

    Silicon wafers and glass surfaces were functionalized with facially amphiphilic antimicrobial copolymers using the "grafting from" technique. Surface-initiated atom transfer radical polymerization (ATRP) was used to grow poly(butylmethacrylate)-co-poly(Boc-aminoethyl methacrylate) from the surfaces. Upon Boc-deprotection, these surfaces became highly antimicrobial and killed S. aureus and E. coli 100% in less than 5 min. The molecular weight and grafting density of the polymer were controlled by varying the polymerization time and initiator surface density. Antimicrobial studies showed that the killing efficiency of these surfaces was independent of polymer layer thickness or grafting density within the range of surfaces studied.

  10. Biocompatible implant surface treatments.

    Science.gov (United States)

    Pattanaik, Bikash; Pawar, Sudhir; Pattanaik, Seema

    2012-01-01

    Surface plays a crucial role in biological interactions. Surface treatments have been applied to metallic biomaterials in order to improve their wear properties, corrosion resistance, and biocompatibility. A systematic review was performed on studies investigating the effects of implant surface treatments on biocompatibility. We searched the literature using PubMed, electronic databases from 1990 to 2009. Key words such as implant surface topography, surface roughness, surface treatment, surface characteristics, and surface coatings were used. The search was restricted to English language articles published from 1990 to December 2009. Additionally, a manual search in the major dental implant journals was performed. When considering studies, clinical studies were preferred followed by histological human studies, animal studies, and in vitro studies. A total of 115 articles were selected after elimination: clinical studies, 24; human histomorphometric studies, 11; animal histomorphometric studies, 46; in vitro studies, 34. The following observations were made in this review: · The focus has shifted from surface roughness to surface chemistry and a combination of chemical manipulations on the porous structure. More investigations are done regarding surface coatings. · Bone response to almost all the surface treatments was favorable. · Future trend is focused on the development of osteogenic implant surfaces. Limitation of this study is that we tried to give a broader overview related to implant surface treatments. It does not give any conclusion regarding the best biocompatible implant surface treatment investigated till date. Unfortunately, the eventually selected studies were too heterogeneous for inference of data.

  11. Computer aided surface representation

    Energy Technology Data Exchange (ETDEWEB)

    Barnhill, R E

    1987-11-01

    The aims of this research are the creation of new surface forms and the determination of geometric and physical properties of surfaces. The full sweep from constructive mathematics through the implementation of algorithms and the interactive computer graphics display of surfaces is utilized. Both three-dimensional and multi- dimensional surfaces are considered. Particular emphasis is given to the scientific computing solution of Department of Energy problems. The methods that we have developed and that we are proposing to develop allow applications such as: Producing smooth contour maps from measured data, such as weather maps. Modeling the heat distribution inside a furnace from sample measurements. Terrain modeling based on satellite pictures. The investigation of new surface forms includes the topics of triangular interpolants, multivariate interpolation, surfaces defined on surfaces and monotone and/or convex surfaces. The geometric and physical properties considered include contours, the intersection of surfaces, curvatures as a interrogation tool, and numerical integration.

  12. Nanofluids mediating surface forces.

    Science.gov (United States)

    Pilkington, Georgia A; Briscoe, Wuge H

    2012-11-01

    Fluids containing nanostructures, known as nanofluids, are increasingly found in a wide array of applications due to their unique physical properties as compared with their base fluids and larger colloidal suspensions. With several tuneable parameters such as the size, shape and surface chemistry of nanostructures, as well as numerous base fluids available, nanofluids also offer a new paradigm for mediating surface forces. Other properties such as local surface plasmon resonance and size dependent magnetism of nanostructures also present novel mechanisms for imparting tuneable surface interactions. However, our fundamental understanding, experimentally and theoretically, of how these parameters might affect surface forces remains incomplete. Here we review recent results on equilibrium and dynamic surface forces between macroscopic surfaces in nanofluids, highlighting the overriding trends in the correlation between the physical parameters that characterise nanofluids and the surface forces they mediate. We also discuss the challenges that confront existing surface force knowledge as a result of this new paradigm.

  13. Fluorinated silica microchannel surfaces

    Science.gov (United States)

    Kirby, Brian J.; Shepodd, Timothy Jon

    2005-03-15

    A method for surface modification of microchannels and capillaries. The method produces a chemically inert surface having a lowered surface free energy and improved frictional properties by attaching a fluorinated alkane group to the surface. The coating is produced by hydrolysis of a silane agent that is functionalized with either alkoxy or chloro ligands and an uncharged C.sub.3 -C.sub.10 fluorinated alkane chain. It has been found that the extent of surface coverage can be controlled by controlling the contact time from a minimum of about 2 minutes to a maximum of 120 minutes for complete surface coverage.

  14. Extremal surface barriers

    Energy Technology Data Exchange (ETDEWEB)

    Engelhardt, Netta; Wall, Aron C. [Department of Physics, University of California,Santa Barbara, CA 93106 (United States)

    2014-03-13

    We present a generic condition for Lorentzian manifolds to have a barrier that limits the reach of boundary-anchored extremal surfaces of arbitrary dimension. We show that any surface with nonpositive extrinsic curvature is a barrier, in the sense that extremal surfaces cannot be continuously deformed past it. Furthermore, the outermost barrier surface has nonnegative extrinsic curvature. Under certain conditions, we show that the existence of trapped surfaces implies a barrier, and conversely. In the context of AdS/CFT, these barriers imply that it is impossible to reconstruct the entire bulk using extremal surfaces. We comment on the implications for the firewall controversy.

  15. Designing bioinspired superoleophobic surfaces

    Science.gov (United States)

    Brown, Philip S.; Bhushan, Bharat

    2016-01-01

    Nature provides a range of functional surfaces, for example, water-repellent or superhydrophobic surfaces, most common among them the lotus leaf. While water-repellency is widespread in nature, oil-repellency is typically limited to surfaces submerged in water, such as fish scales. To achieve oleophobicity in air, inspiration must be taken from natural structures and chemistries that are not readily available in nature need to be introduced. Researchers usually turn to fluorinated materials to provide the low surface energy that, when combined with bioinspired surface topography, is the key to unlocking oil-repellency. This review presents the state-of-the-art in the fabrication of superoleophobic surfaces.

  16. Reactions at Solid Surfaces

    CERN Document Server

    Ertl, Gerhard

    2009-01-01

    Expanding on the ideas first presented in Gerhard Ertl's acclaimed Baker Lectures at Cornell University, Reactions at Solid Surfaces comprises an authoritative, self-contained, book-length introduction to surface reactions for both professional chemists and students alike. Outlining our present understanding of the fundamental processes underlying reactions at solid surfaces, the book provides the reader with a complete view of how chemistry works at surfaces, and how to understand and probe the dynamics of surface reactions. Comparing traditional surface probes with more modern ones, and brin

  17. On log surfaces

    CERN Document Server

    Fujino, Osamu

    2012-01-01

    This paper is an announcement of the minimal model theory for log surfaces in all characteristics and contains some related results including a simplified proof of the Artin-Keel contraction theorem in the surface case.

  18. Apollo Surface Panoramas

    Data.gov (United States)

    National Aeronautics and Space Administration — Apollo Surface Panoramas is a digital library of photographic panoramas that the Apollo astronauts took while exploring the Moon's surface. These images provide a...

  19. Laser textured surface gradients

    Science.gov (United States)

    Ta, Van Duong; Dunn, Andrew; Wasley, Thomas J.; Li, Ji; Kay, Robert W.; Stringer, Jonathan; Smith, Patrick J.; Esenturk, Emre; Connaughton, Colm; Shephard, Jonathan D.

    2016-05-01

    This work demonstrates a novel technique for fabricating surfaces with roughness and wettability gradients and their subsequent applications for chemical sensors. Surface roughness gradients on brass sheets are obtained directly by nanosecond laser texturing. When these structured surfaces are exposed to air, their wettability decreases with time (up to 20 days) achieving both spatial and temporal wettability gradients. The surfaces are responsive to organic solvents. Contact angles of a series of dilute isopropanol solutions decay exponentially with concentration. In particular, a fall of 132° in contact angle is observed on a surface gradient, one order of magnitude higher than the 14° observed for the unprocessed surface, when the isopropanol concentration increased from 0 to 15.6 wt%. As the wettability changes gradually over the surface, contact angle also changes correspondingly. This effect offers multi-sensitivity at different zones on the surface and is useful for accurate measurement of chemical concentration.

  20. Developable algebraic surfaces

    Institute of Scientific and Technical Information of China (English)

    CHEN Dongren; WANG Guojin

    2004-01-01

    An algebraic surface can be defined by an implicit polynomial equation F(x,y,z)=0. In this paper, general characterizations of developable algebraic surfaces of arbitrary degree are presented. Using the shift operators of the subscripts of Bézier ordinates, the uniform apparent discriminants of developable algebraic surfaces to their Bézier ordinates are given directly. To degree 2 algebraic surfaces, which are widely used in computer aided geometric design and graphics, all possible developable surface types are obtained. For more conveniently applying algebraic surfaces of high degree to computer aided geometric design, the notion of ε-quasi-developable surfaces is introduced, and an example of using a quasi-developable algebraic surface of degree 3 to interpolate three curves of degree 2 is given.

  1. Bonnet Ruled Surfaces

    Institute of Scientific and Technical Information of China (English)

    Filiz KANBAY

    2005-01-01

    We consider the Bonnet ruled surfaces which admit only one non-trivial isometry that preserves the principal curvatures. We determine the Bonnet ruled surfaces whose generators and orthogonal trajectories form a special net called an A-net.

  2. Surface Bubble Nucleation Stability

    NARCIS (Netherlands)

    Seddon, James Richard Thorley; Kooij, Ernst S.; Poelsema, Bene; Zandvliet, Henricus J.W.; Lohse, Detlef

    2011-01-01

    Recent research has revealed several different techniques for nanoscopic gas nucleation on submerged surfaces, with findings seemingly in contradiction with each other. In response to this, we have systematically investigated the occurrence of surface nanobubbles on a hydrophobized silicon substrate

  3. Biomaterials surface science

    CERN Document Server

    Taubert, Andreas; Rodriguez-Cabello, José Carlos

    2013-01-01

    The book provides an overview of the highly interdisciplinary field of surface science in the context of biological and biomedical applications. The covered topics range from micro- and nanostructuring for imparting functionality in a top-down manner to the bottom-up fabrication of gradient surfaces by self-assembly, from interfaces between biomaterials and living matter to smart, stimuli-responsive surfaces, and from cell and surface mechanics to the elucidation of cell-chip interactions in biomedical devices.

  4. PSC: protein surface classification.

    Science.gov (United States)

    Tseng, Yan Yuan; Li, Wen-Hsiung

    2012-07-01

    We recently proposed to classify proteins by their functional surfaces. Using the structural attributes of functional surfaces, we inferred the pairwise relationships of proteins and constructed an expandable database of protein surface classification (PSC). As the functional surface(s) of a protein is the local region where the protein performs its function, our classification may reflect the functional relationships among proteins. Currently, PSC contains a library of 1974 surface types that include 25,857 functional surfaces identified from 24,170 bound structures. The search tool in PSC empowers users to explore related surfaces that share similar local structures and core functions. Each functional surface is characterized by structural attributes, which are geometric, physicochemical or evolutionary features. The attributes have been normalized as descriptors and integrated to produce a profile for each functional surface in PSC. In addition, binding ligands are recorded for comparisons among homologs. PSC allows users to exploit related binding surfaces to reveal the changes in functionally important residues on homologs that have led to functional divergence during evolution. The substitutions at the key residues of a spatial pattern may determine the functional evolution of a protein. In PSC (http://pocket.uchicago.edu/psc/), a pool of changes in residues on similar functional surfaces is provided.

  5. Triangular bubble spline surfaces.

    Science.gov (United States)

    Kapl, Mario; Byrtus, Marek; Jüttler, Bert

    2011-11-01

    We present a new method for generating a [Formula: see text]-surface from a triangular network of compatible surface strips. The compatible surface strips are given by a network of polynomial curves with an associated implicitly defined surface, which fulfill certain compatibility conditions. Our construction is based on a new concept, called bubble patches, to represent the single surface patches. The compatible surface strips provide a simple [Formula: see text]-condition between two neighboring bubble patches, which are used to construct surface patches, connected with [Formula: see text]-continuity. For [Formula: see text], we describe the obtained [Formula: see text]-condition in detail. It can be generalized to any [Formula: see text]. The construction of a single surface patch is based on Gordon-Coons interpolation for triangles.Our method is a simple local construction scheme, which works uniformly for vertices of arbitrary valency. The resulting surface is a piecewise rational surface, which interpolates the given network of polynomial curves. Several examples of [Formula: see text], [Formula: see text] and [Formula: see text]-surfaces are presented, which have been generated by using our method. The obtained surfaces are visualized with reflection lines to demonstrate the order of smoothness.

  6. Surface and Interface Characterisation

    DEFF Research Database (Denmark)

    De Chiffre, Leonardo

    2006-01-01

    Surface physical analysis, i.e. topography characterisation, encompasses measurement, visualisation, and quantification. This is critical for both component form and for surface finish at macro-, micro- and nano-scales. The principal methods of surface topography measurement are stylus profilomet...

  7. Architectural Knitted Surfaces

    DEFF Research Database (Denmark)

    Mossé, Aurélie

    2010-01-01

    WGSN reports from the Architectural Knitted Surfaces workshop recently held at ShenkarCollege of Engineering and Design, Tel Aviv, which offered a cutting-edge insight into interactive knitted surfaces. With the increasing role of smart textiles in architecture, the Architectural Knitted Surfaces...

  8. Surface for dummies

    CERN Document Server

    Rathbone, Andy

    2014-01-01

    Make Microsoft's Surface work-and play-just the way you want it to Microsoft's Surface tablet has the features and personality you're looking for, with a robust environment for business computing that doesn't skimp on fun. Surface for Dummies, 2nd Edition explains how Windows 8.1 Pro and Windows RT differ, and helps you decide which Surface model is best for you. Step by step, this book walks you through both the hardware and software features of the Surface, including the touch cover and type cover, Windows RT and Windows 8.1 Pro operating systems, and the coveted Office Home & Student 2013 s

  9. Approximation by Cylinder Surfaces

    DEFF Research Database (Denmark)

    Randrup, Thomas

    1997-01-01

    We present a new method for approximation of a given surface by a cylinder surface. It is a constructive geometric method, leading to a monorail representation of the cylinder surface. By use of a weighted Gaussian image of the given surface, we determine a projection plane. In the orthogonal...... projection of the surface onto this plane, a reference curve is determined by use of methods for thinning of binary images. Finally, the cylinder surface is constructed as follows: the directrix of the cylinder surface is determined by a least squares method minimizing the distance to the points...... in the projection within a tolerance given by the reference curve, and the rulings are lines perpendicular to the projection plane. Application of the method in ship design is given....

  10. Computer aided surface representation

    Energy Technology Data Exchange (ETDEWEB)

    Barnhill, R.E.

    1990-02-19

    The central research problem of this project is the effective representation, computation, and display of surfaces interpolating to information in three or more dimensions. If the given information is located on another surface, then the problem is to construct a surface defined on a surface''. Sometimes properties of an already defined surface are desired, which is geometry processing''. Visualization of multivariate surfaces is possible by means of contouring higher dimensional surfaces. These problems and more are discussed below. The broad sweep from constructive mathematics through computational algorithms to computer graphics illustrations is utilized in this research. The breadth and depth of this research activity makes this research project unique.

  11. On rationally supported surfaces

    DEFF Research Database (Denmark)

    Gravesen, Jens; Juttler, B.; Sir, Z.

    2008-01-01

    We analyze the class of surfaces which are equipped with rational support functions. Any rational support function can be decomposed into a symmetric (even) and an antisymmetric (odd) part. We analyze certain geometric properties of surfaces with odd and even rational support functions....... In particular it is shown that odd rational support functions correspond to those rational surfaces which can be equipped with a linear field of normal vectors, which were discussed by Sampoli et al. (Sampoli, M.L., Peternell, M., Juttler, B., 2006. Rational surfaces with linear normals and their convolutions...... with rational surfaces. Comput. Aided Geom. Design 23, 179-192). As shown recently, this class of surfaces includes non-developable quadratic triangular Bezier surface patches (Lavicka, M., Bastl, B., 2007. Rational hypersurfaces with rational convolutions. Comput. Aided Geom. Design 24, 410426; Peternell, M...

  12. Positrons in surface physics

    Science.gov (United States)

    Hugenschmidt, Christoph

    2016-12-01

    Within the last decade powerful methods have been developed to study surfaces using bright low-energy positron beams. These novel analysis tools exploit the unique properties of positron interaction with surfaces, which comprise the absence of exchange interaction, repulsive crystal potential and positron trapping in delocalized surface states at low energies. By applying reflection high-energy positron diffraction (RHEPD) one can benefit from the phenomenon of total reflection below a critical angle that is not present in electron surface diffraction. Therefore, RHEPD allows the determination of the atom positions of (reconstructed) surfaces with outstanding accuracy. The main advantages of positron annihilation induced Auger-electron spectroscopy (PAES) are the missing secondary electron background in the energy region of Auger-transitions and its topmost layer sensitivity for elemental analysis. In order to enable the investigation of the electron polarization at surfaces low-energy spin-polarized positrons are used to probe the outermost electrons of the surface. Furthermore, in fundamental research the preparation of well defined surfaces tailored for the production of bound leptonic systems plays an outstanding role. In this report, it is envisaged to cover both the fundamental aspects of positron surface interaction and the present status of surface studies using modern positron beam techniques.

  13. DNA ELECTROPHORESIS AT SURFACES

    Energy Technology Data Exchange (ETDEWEB)

    RAFAILOVICH, MIRIAM; SOKOLOV, JONATHAN; GERSAPPE, DILIP

    2003-09-01

    During this year we performed two major projects: I. We developed a detailed theoretical model which complements our experiments on surface DNA electrophoresis. We found that it was possible to enhance the separation of DNA chains by imposing a chemical nanoscale pattern on the surface. This approach utilized the surface interaction effect of the DNA chains with the substrate and is a refinement to our previous method in which DNA chains were separated on homogeneous flat surfaces. By introducing the nano-patterns on the surface, the conformational changes of DNA chains of different lengths can be amplified, which results in the different friction strengths with the substrate surface. Our results also show that, when compared to the DNA electrophoresis performed on homogeneous flat surfaces, nanopatterned surfaces offer a larger window in choosing different surface interactions to achieve separation. II. In collaboration with a large international manufacturer of skin care products we also embarked on a project involving photo toxicity of titanium dioxide nanoparticles, which are a key ingredient in sunscreen and cosmetic lotions. The results clearly implicated the nanoparticles in catalyzing damage to chromosomal DNA. We then used this knowledge to develop a polymer/anti-oxidant coating which prevented the photocatalytic reaction on DNA while still retaining the UV absorptive properties of the nanoparticles. The standard gel electrophoresis was not sufficient in determining the extent of the DNA damage. The conclusions of this study were based predominantly on analysis obtained with the surface electrophoresis method.

  14. On orbit surfacing of thermal control surfaces

    Science.gov (United States)

    Racette, G. W.

    1984-01-01

    Substrates to be contaminated and contamination source were prepared. Additional information on paint spray method apparatus was obtained. Silver teflon second surface mirror samples and S 13 GLO paint samples were mounted, photographed under the microscope and measured to establish baseline data. Atomic oxygen cleaning and spray painting are being considered. Electrostatic powder and plasma spray coating systems appear to have serious drawbacks.

  15. Laser-surface interactions

    CERN Document Server

    Ganeev, Rashid A

    2014-01-01

    This book is about the interaction of laser radiation with various surfaces at variable parameters of radiation. As a basic principle of classification we chose the energetic or intensity level of interaction of laser radiation with the surfaces. These two characteristics of laser radiation are the most important parameters defining entire spectrum of the processes occurring on the surfaces during interaction with electromagnetic waves. This is a first book containing a whole spectrum of the laser-surface interactions distinguished by the ranges of used laser intensity. It combines the surface response starting from extremely weak laser intensities (~1 W cm-2) up to the relativistic intensities (~1020 W cm-2 and higher). The book provides the basic information about lasers and acquaints the reader with both common applications of laser-surface interactions (laser-related printers, scanners, barcode readers, discs, material processing, military, holography, medicine, etc) and unusual uses of the processes on t...

  16. Superhydrophobicity from microstructured surface

    Institute of Scientific and Technical Information of China (English)

    ZHENG Lijun; WU Xuedong; LOU Zeng; WU Dan

    2004-01-01

    Superhydrophobicity is referred to the wettability of a solid surface which has a water apparent contact angle greater than 150°. It has attracted great interest in both fundamental researches and practical applications. This paper discusses two models: Wenzel model and Cassie model, to describe the superhydrophobic states of surface. The effectsof surface morphology and microstructure on superhydrophobicity are discussed, and the internal relationship between Wenzel and Cassie states is presented. These two su perhydrophobic states can coexist and they present different properties on contact angle hysteresis. It is reported that the irreversible transition can be realized from Cassie state to Wenzel state under some certain conditions. This paper also gives a review of recent progresses in the strategies of fabricating superhydrophobic surfaces by designing microstructured or microtextured surfaces. Finally, the fundamental research and applications of superhydrophobic surfaces are prospected.

  17. Conversion electron surface imaging

    CERN Document Server

    Irwin, G M; Wehner, A

    1999-01-01

    A method of imaging the Moessbauer absorption over the surface of a sample based on counting conversion electrons emitted from the surface following resonant absorption of gamma radiation is described. This Conversion Electron Surface Imaging (CESI) method is somewhat analogous to Magnetic Resonance Imaging (MRI), particularly chemical shift imaging, and similar tomographic reconstruction techniques are involved in extracting the image. The theory behind the technique and a prototype device is described, as well as the results of proof-of-principle experiments which demonstrate the function of the device. Eventually this same prototype device will be part of a system to determine the spatial variation of the Moessbauer spectrum over the surface of a sample. Applications include imaging of variations of surface properties of steels and other iron containing alloys, as well as other surfaces over which sup 5 sup 7 Fe has been deposited.

  18. Designing bioinspired superoleophobic surfaces

    Directory of Open Access Journals (Sweden)

    Philip S. Brown

    2016-01-01

    Full Text Available Nature provides a range of functional surfaces, for example, water-repellent or superhydrophobic surfaces, most common among them the lotus leaf. While water-repellency is widespread in nature, oil-repellency is typically limited to surfaces submerged in water, such as fish scales. To achieve oleophobicity in air, inspiration must be taken from natural structures and chemistries that are not readily available in nature need to be introduced. Researchers usually turn to fluorinated materials to provide the low surface energy that, when combined with bioinspired surface topography, is the key to unlocking oil-repellency. This review presents the state-of-the-art in the fabrication of superoleophobic surfaces.

  19. Positrons in Surface Physics

    CERN Document Server

    Hugenschmidt, Christoph

    2016-01-01

    Within the last decade powerful methods have been developed to study surfaces using bright low-energy positron beams. These novel analysis tools exploit the unique properties of positron interaction with surfaces, which comprise the absence of exchange interaction, repulsive crystal potential and positron trapping in delocalized surface states at low energies. By applying reflection high-energy positron diffraction (RHEPD) one can benefit from the phenomenon of total reflection below a critical angle that is not present in electron surface diffraction. Therefore, RHEPD allows the determination of the atom positions of (reconstructed) surfaces with outstanding accuracy. The main advantages of positron annihilation induced Auger-electron spectroscopy (PAES) are the missing secondary electron background in the energy region of Auger-transitions and its topmost layer sensitivity for elemental analysis. In order to enable the investigation of the electron polarization at surfaces low-energy spin-polarized positron...

  20. Mirror reactor surface study

    Energy Technology Data Exchange (ETDEWEB)

    Hunt, A. L.; Damm, C. C.; Futch, A. H.; Hiskes, J. R.; Meisenheimer, R. G.; Moir, R. W.; Simonen, T. C.; Stallard, B. W.; Taylor, C. E.

    1976-09-01

    A general survey is presented of surface-related phenomena associated with the following mirror reactor elements: plasma first wall, ion sources, neutral beams, director converters, vacuum systems, and plasma diagnostics. A discussion of surface phenomena in possible abnormal reactor operation is included. Several studies which appear to merit immediate attention and which are essential to the development of mirror reactors are abstracted from the list of recommended areas for surface work. The appendix contains a discussion of the fundamentals of particle/surface interactions. The interactions surveyed are backscattering, thermal desorption, sputtering, diffusion, particle ranges in solids, and surface spectroscopic methods. A bibliography lists references in a number of categories pertinent to mirror reactors. Several complete published and unpublished reports on surface aspects of current mirror plasma experiments and reactor developments are also included.

  1. Ruled Laguerre minimal surfaces

    KAUST Repository

    Skopenkov, Mikhail

    2011-10-30

    A Laguerre minimal surface is an immersed surface in ℝ 3 being an extremal of the functional ∫ (H 2/K-1)dA. In the present paper, we prove that the only ruled Laguerre minimal surfaces are up to isometry the surfaces ℝ (φλ) = (Aφ, Bφ, Cφ + D cos 2φ) + λ(sin φ, cos φ, 0), where A,B,C,D ε ℝ are fixed. To achieve invariance under Laguerre transformations, we also derive all Laguerre minimal surfaces that are enveloped by a family of cones. The methodology is based on the isotropic model of Laguerre geometry. In this model a Laguerre minimal surface enveloped by a family of cones corresponds to a graph of a biharmonic function carrying a family of isotropic circles. We classify such functions by showing that the top view of the family of circles is a pencil. © 2011 Springer-Verlag.

  2. Impact of surface chemistry

    OpenAIRE

    2010-01-01

    The applications of molecular surface chemistry in heterogeneous catalyst technology, semiconductor-based technology, medical technology, anticorrosion and lubricant technology, and nanotechnology are highlighted in this perspective. The evolution of surface chemistry at the molecular level is reviewed, and the key roles of surface instrumentation developments for in situ studies of the gas–solid, liquid–solid, and solid–solid interfaces under reaction conditions are emphasized.

  3. Impact of surface chemistry

    Science.gov (United States)

    Somorjai, Gabor A.; Li, Yimin

    2011-01-01

    The applications of molecular surface chemistry in heterogeneous catalyst technology, semiconductor-based technology, medical technology, anticorrosion and lubricant technology, and nanotechnology are highlighted in this perspective. The evolution of surface chemistry at the molecular level is reviewed, and the key roles of surface instrumentation developments for in situ studies of the gas–solid, liquid–solid, and solid–solid interfaces under reaction conditions are emphasized. PMID:20880833

  4. Geodesics on Surfaces

    OpenAIRE

    2016-01-01

    We study geodesics on surfaces in the setting of classical differential geometry. We define the curvature of curves and surfaces in three-space and use the fundamental forms of a surface to measure lengths, angles, and areas. We follow Riemann and adopt a more abstract approach, and use tensor notation to discuss Gaussian curvature, Gauss's Theorema Egregium, geodesic curves, and the Gauss-Bonnet theorem. Properties of geodesics are proven by variational methods, showing the connection betwee...

  5. Running surface couplings

    OpenAIRE

    1995-01-01

    We discuss the renormalization group improved effective action and running surface couplings in curved spacetime with boundary. Using scalar self-interacting theory as an example, we study the influence of the boundary effects to effective equations of motion in spherical cap and the relevance of surface running couplings to quantum cosmology and symmetry breaking phenomenon. Running surface couplings in the asymptotically free SU(2) gauge theory are found.

  6. Encyclopedia of analytical surfaces

    CERN Document Server

    Krivoshapko, S N

    2015-01-01

    This encyclopedia presents an all-embracing collection of analytical surface classes. It provides concise definitions  and description for more than 500 surfaces and categorizes them in 38 classes of analytical surfaces. All classes are cross references to the original literature in an excellent bibliography. The encyclopedia is of particular interest to structural and civil engineers and serves as valuable reference for mathematicians.

  7. Cleaning and surface properties

    CERN Document Server

    Taborelli, M

    2007-01-01

    Principles of precision cleaning for ultra high vacuum applications are reviewed together with the techniques for the evaluation of surface cleanliness. Methods to verify the effectiveness of cleaning procedures are discussed. Examples are presented to illustrate the influence of packaging and storage on the recontamination of the surface after cleaning. Finally, the effect of contamination on some relevant surface properties, like secondary electron emission and wettability is presented.

  8. Designing bioinspired superoleophobic surfaces

    OpenAIRE

    Philip S. Brown; Bharat Bhushan

    2016-01-01

    Nature provides a range of functional surfaces, for example, water-repellent or superhydrophobic surfaces, most common among them the lotus leaf. While water-repellency is widespread in nature, oil-repellency is typically limited to surfaces submerged in water, such as fish scales. To achieve oleophobicity in air, inspiration must be taken from natural structures and chemistries that are not readily available in nature need to be introduced. Researchers usually turn to fluorinated materials t...

  9. SILICA SURFACED CARBON FIBERS.

    Science.gov (United States)

    carbon fibers . Several economical and simple processes were developed for obtaining research quantities of silica surfaced carbon filaments. Vat dipping processes were utilized to deposit an oxide such as silica onto the surface and into the micropores of available carbon or graphite base fibers. High performance composite materials were prepared with the surface treated carbon fibers and various resin matrices. The ablative characteristics of these composites were very promising and exhibited fewer limitations than either silica or...treated

  10. Surface finish measurement studies

    Science.gov (United States)

    Teague, E. C.

    1983-01-01

    The performance of stylus instruments for measuring the topography of National Transonic Facility (NTF) model surfaces both for monitoring during fabrication and as an absolute measurement of topography was evaluated. It was found that the shop-grade instruments can damage the surface of models and that their use for monitoring fabrication procedures can lead to surface finishes that are substantially out of range in critical areas of the leading edges. The development of a prototype light-scattering instrument which would allow for rapid assessment of the surface finish of a model is also discussed.

  11. Surface science an introduction

    CERN Document Server

    Hudson, John

    1991-01-01

    The whole field of surface science is covered in this work. Starting with a description of the structure and thermodynamics of clean surfaces, the book goes on to discuss kinetic theory of gases and molecular beam formation. This is followed by a largesection on gas-surface interactions, and another major section on energetic particle-surface interactions. The final chapter provides the background to crystal nucleation and growth. The approach adopted is interdisciplinary and slanted towards theexperimental side, with practical analytical techniques being used to illustrate general princi

  12. Surface nanobubbles and nanodroplets

    Science.gov (United States)

    Lohse, Detlef; Zhang, Xuehua

    2015-07-01

    Surface nanobubbles are nanoscopic gaseous domains on immersed substrates which can survive for days. They were first speculated to exist about 20 years ago, based on stepwise features in force curves between two hydrophobic surfaces, eventually leading to the first atomic force microscopy (AFM) image in 2000. While in the early years it was suspected that they may be an artifact caused by AFM, meanwhile their existence has been confirmed with various other methods, including through direct optical observation. Their existence seems to be paradoxical, as a simple classical estimate suggests that they should dissolve in microseconds, due to the large Laplace pressure inside these nanoscopic spherical-cap-shaped objects. Moreover, their contact angle (on the gas side) is much smaller than one would expect from macroscopic counterparts. This review will not only give an overview on surface nanobubbles, but also on surface nanodroplets, which are nanoscopic droplets (e.g., of oil) on (hydrophobic) substrates immersed in water, as they show similar properties and can easily be confused with surface nanobubbles and as they are produced in a similar way, namely, by a solvent exchange process, leading to local oversaturation of the water with gas or oil, respectively, and thus to nucleation. The review starts with how surface nanobubbles and nanodroplets can be made, how they can be observed (both individually and collectively), and what their properties are. Molecular dynamic simulations and theories to account for the long lifetime of the surface nanobubbles are then reported on. The crucial element contributing to the long lifetime of surface nanobubbles and nanodroplets is pinning of the three-phase contact line at chemical or geometric surface heterogeneities. The dynamical evolution of the surface nanobubbles then follows from the diffusion equation, Laplace's equation, and Henry's law. In particular, one obtains stable surface nanobubbles when the gas influx from

  13. Surface chemistry essentials

    CERN Document Server

    Birdi, K S

    2013-01-01

    Surface chemistry plays an important role in everyday life, as the basis for many phenomena as well as technological applications. Common examples range from soap bubbles, foam, and raindrops to cosmetics, paint, adhesives, and pharmaceuticals. Additional areas that rely on surface chemistry include modern nanotechnology, medical diagnostics, and drug delivery. There is extensive literature on this subject, but most chemistry books only devote one or two chapters to it. Surface Chemistry Essentials fills a need for a reference that brings together the fundamental aspects of surface chemistry w

  14. Anodized dental implant surface

    Directory of Open Access Journals (Sweden)

    Sunil Kumar Mishra

    2017-01-01

    Full Text Available Purpose: Anodized implants with moderately rough surface were introduced around 2000. Whether these implants enhanced biologic effect to improve the environment for better osseointegration was unclear. The purpose of this article was to review the literature available on anodized surface in terms of their clinical success rate and bone response in patients till now. Materials and Methods: A broad electronic search of MEDLINE and PubMed databases was performed. A focus was made on peer-reviewed dental journals. Only articles related to anodized implants were included. Both animal and human studies were included. Results: The initial search of articles resulted in 581 articles on anodized implants. The initial screening of titles and abstracts resulted in 112 full-text papers; 40 animal studies, 16 studies on cell adhesion and bacterial adhesion onto anodized surfaced implants, and 47 human studies were included. Nine studies, which do not fulfill the inclusion criteria, were excluded. Conclusions: The long-term studies on anodized surface implants do favor the surface, but in most of the studies, anodized surface is compared with that of machined surface, but not with other surfaces commercially available. Anodized surface in terms of clinical success rate in cases of compromised bone and immediately extracted sockets has shown favorable success.

  15. Anodized dental implant surface.

    Science.gov (United States)

    Mishra, Sunil Kumar; Kumar, Muktadar Anand; Chowdhary, Ramesh

    2017-01-01

    Anodized implants with moderately rough surface were introduced around 2000. Whether these implants enhanced biologic effect to improve the environment for better osseointegration was unclear. The purpose of this article was to review the literature available on anodized surface in terms of their clinical success rate and bone response in patients till now. A broad electronic search of MEDLINE and PubMed databases was performed. A focus was made on peer-reviewed dental journals. Only articles related to anodized implants were included. Both animal and human studies were included. The initial search of articles resulted in 581 articles on anodized implants. The initial screening of titles and abstracts resulted in 112 full-text papers; 40 animal studies, 16 studies on cell adhesion and bacterial adhesion onto anodized surfaced implants, and 47 human studies were included. Nine studies, which do not fulfill the inclusion criteria, were excluded. The long-term studies on anodized surface implants do favor the surface, but in most of the studies, anodized surface is compared with that of machined surface, but not with other surfaces commercially available. Anodized surface in terms of clinical success rate in cases of compromised bone and immediately extracted sockets has shown favorable success.

  16. Microbiological surface sampling cart

    Science.gov (United States)

    Wilkins, J. R.; Mills, S. M.

    1972-01-01

    Mobile sampling cart automatically swabs surfaces for the recovery of microorganisms. Unit operates without human involvement and provides for control of swabbing speed, rotation of cotton swab, and the pressure and angle applied to swab. Capability of reverse direction is also available. Sampling cart use is limited to flat surfaces.

  17. Bacteria-surface interactions.

    Science.gov (United States)

    Tuson, Hannah H; Weibel, Douglas B

    2013-05-14

    The interaction of bacteria with surfaces has important implications in a range of areas, including bioenergy, biofouling, biofilm formation, and the infection of plants and animals. Many of the interactions of bacteria with surfaces produce changes in the expression of genes that influence cell morphology and behavior, including genes essential for motility and surface attachment. Despite the attention that these phenotypes have garnered, the bacterial systems used for sensing and responding to surfaces are still not well understood. An understanding of these mechanisms will guide the development of new classes of materials that inhibit and promote cell growth, and complement studies of the physiology of bacteria in contact with surfaces. Recent studies from a range of fields in science and engineering are poised to guide future investigations in this area. This review summarizes recent studies on bacteria-surface interactions, discusses mechanisms of surface sensing and consequences of cell attachment, provides an overview of surfaces that have been used in bacterial studies, and highlights unanswered questions in this field.

  18. Pseudospherical surfaces with singularities

    DEFF Research Database (Denmark)

    Brander, David

    2016-01-01

    We study a generalization of constant Gauss curvature −1 surfaces in Euclidean 3-space, based on Lorentzian harmonic maps, that we call pseudospherical frontals. We analyse the singularities of these surfaces, dividing them into those of characteristic and non-characteristic type. We give methods...

  19. Environmental surface asepsis.

    Science.gov (United States)

    Palenik, Charles John

    2005-09-01

    Environmental surface disinfection is easily accomplished with precleaning and disinfection techniques, and prepared surfaces or difficult-to-clean items can be covered with impermeable barriers. When carried out effectively, both practitioners and patients are protected from exposure to microorganisms that transmit disease and cause illness.

  20. Isotopic Implicit Surface Meshing

    NARCIS (Netherlands)

    Boissonnat, Jean-Daniel; Cohen-Steiner, David; Vegter, Gert

    2004-01-01

    This paper addresses the problem of piecewise linear approximation of implicit surfaces. We first give a criterion ensuring that the zero-set of a smooth function and the one of a piecewise linear approximation of it are isotopic. Then, we deduce from this criterion an implicit surface meshing algor

  1. Formation on grain surfaces

    NARCIS (Netherlands)

    Cazaux, S; Tielens, AGGM

    2004-01-01

    The most abundant interstellar molecule, H-2, is generally thought to form by recombination of H atoms on grain surfaces. On surfaces, hydrogen atoms can be physisorbed and chemisorbed and their mobility can be governed by quantum mechanical tunneling or thermal hopping. We have developed a model fo

  2. Physical chemistry of surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Adamson, A.

    1990-01-01

    This book covers surface chemistry and selected aspects f colloid chemistry. The text covers such areas as structure and thermodynamics of liquid interfaces; electrical aspects of surface chemistry; microscopy and spectroscopy of solid interfaces; nucleation; contact angle; adsorption from solution; friction and adhesion; lubrication; and chemisorption and catalysis.

  3. Workbench surface editor of brain cortical surface

    Science.gov (United States)

    Dow, Douglas E.; Nowinski, Wieslaw L.; Serra, Luis

    1996-04-01

    We have developed a 3D reach-in tool to manually reconstruct 3D cortical surface patches from 2D brain atlas images. The first application of our cortex editor is building 3D functional maps, specifically Brodmann's areas. This tool may also be useful in clinical practice to adjust incorrectly mapped atlas regions due to the deforming effect of lesions. The cortex editor allows a domain expert to control the correlation of control points across slices. Correct correlation has been difficult for 3D reconstruction algorithms because the atlas slices are far apart and because of the complex topology of the cortex which differs so much from slice to slice. Also, higher precision of the resulting surfaces is demanded since these define 3D brain atlas features upon which future stereotactic surgery may be based. The cortex editor described in this paper provides a tool suitable for a domain expert to use in defining the 3D surface of a Brodmann's area.

  4. Real estate surfaces appraisal

    Directory of Open Access Journals (Sweden)

    Marina Ciuna

    2014-07-01

    Full Text Available In the appraisal of the market value of the properties are applied two important surface indexes: the market surface ratio of the secondary surfaces and the ratio of the site value to total value (allocation method. The measure of both these indexes can be revealed difficult: the data collection of the surface trade ratio in the market can get different results and in practice often the valuer refolds on the fixed coefficients brought in the handbooks and in the circulars of the public administration; the appraisal of the ratio of the site, especially in the central zones and for ancient buildings, where besides the incidence is higher, is developed extrapolating the ratios from the peripheral zones for new building or falling back on the publications of real estate sector.For the market comparison methods are proposed a series of test of surface trade ratio and land value ratio to foresee the effect on the appraisal result.

  5. Surface enhanced Raman scattering

    CERN Document Server

    Furtak, Thomas

    1982-01-01

    In the course of the development of surface science, advances have been identified with the introduction of new diagnostic probes for analytical characterization of the adsorbates and microscopic structure of surfaces and interfaces. Among the most recently de­ veloped techniques, and one around which a storm of controversy has developed, is what has now been earmarked as surface enhanced Raman scattering (SERS). Within this phenomenon, molecules adsorbed onto metal surfaces under certain conditions exhibit an anomalously large interaction cross section for the Raman effect. This makes it possible to observe the detailed vibrational signature of the adsorbate in the ambient phase with an energy resolution much higher than that which is presently available in electron energy loss spectroscopy and when the surface is in contact with a much larger amount of material than that which can be tolerated in infrared absorption experiments. The ability to perform vibrational spectroscopy under these conditions would l...

  6. Rough Surface Contact

    Directory of Open Access Journals (Sweden)

    T Nguyen

    2017-06-01

    Full Text Available This paper studies the contact of general rough curved surfaces having nearly identical geometries, assuming the contact at each differential area obeys the model proposed by Greenwood and Williamson. In order to account for the most general gross geometry, principles of differential geometry of surface are applied. This method while requires more rigorous mathematical manipulations, the fact that it preserves the original surface geometries thus makes the modeling procedure much more intuitive. For subsequent use, differential geometry of axis-symmetric surface is considered instead of general surface (although this “general case” can be done as well in Chapter 3.1. The final formulas for contact area, load, and frictional torque are derived in Chapter 3.2.

  7. Surface nanoscale axial photonics

    CERN Document Server

    Sumetsky, M

    2011-01-01

    Dense photonic integration promises to revolutionize optical computing and communications. However, efforts towards this goal face unacceptable attenuation of light caused by surface roughness in microscopic devices. Here we address this problem by introducing Surface Nanoscale Axial Photonics (SNAP). The SNAP platform is based on whispering gallery modes circulating around the optical fiber surface and undergoing slow axial propagation readily described by the one-dimensional Schr\\"odinger equation. These modes can be steered with dramatically small nanoscale variation of the fiber radius, which is quite simple to introduce in practice. The extremely low loss of SNAP devices is achieved due to the fantastically low surface roughness inherent in a drawn fiber surface. In excellent agreement with the developed theory, we experimentally demonstrate localization of light in quantum wells, halting light by a point source, tunneling through potential barriers, dark states, etc. This demonstration, prototyping basi...

  8. Defects at oxide surfaces

    CERN Document Server

    Thornton, Geoff

    2015-01-01

    This book presents the basics and characterization of defects at oxide surfaces. It provides a state-of-the-art review of the field, containing information to the various types of surface defects, describes analytical methods to study defects, their chemical activity and the catalytic reactivity of oxides. Numerical simulations of defective structures complete the picture developed. Defects on planar surfaces form the focus of much of the book, although the investigation of powder samples also form an important part. The experimental study of planar surfaces opens the possibility of applying the large armoury of techniques that have been developed over the last half-century to study surfaces in ultra-high vacuum. This enables the acquisition of atomic level data under well-controlled conditions, providing a stringent test of theoretical methods. The latter can then be more reliably applied to systems such as nanoparticles for which accurate methods of characterization of structure and electronic properties ha...

  9. PREFACE: Nanostructured surfaces

    Science.gov (United States)

    Palmer, Richard E.

    2003-10-01

    We can define nanostructured surfaces as well-defined surfaces which contain lateral features of size 1-100 nm. This length range lies well below the micron regime but equally above the Ångstrom regime, which corresponds to the interatomic distances on single-crystal surfaces. This special issue of Journal of Physics: Condensed Matter presents a collection of twelve papers which together address the fabrication, characterization, properties and applications of such nanostructured surfaces. Taken together they represent, in effect, a status report on the rapid progress taking place in this burgeoning area. The first four papers in this special issue have been contributed by members of the European Research Training Network ‘NanoCluster’, which is concerned with the deposition, growth and characterization of nanometre-scale clusters on solid surfaces—prototypical examples of nanoscale surface features. The paper by Vandamme is concerned with the fundamentals of the cluster-surface interaction; the papers by Gonzalo and Moisala address, respectively, the optical and catalytic properties of deposited clusters; and the paper by van Tendeloo reports the application of transmission electron microscopy (TEM) to elucidate the surface structure of spherical particles in a catalyst support. The fifth paper, by Mendes, is also the fruit of a European Research Training Network (‘Micro-Nano’) and is jointly contributed by three research groups; it reviews the creation of nanostructured surface architectures from chemically-synthesized nanoparticles. The next five papers in this special issue are all concerned with the characterization of nanostructured surfaces with scanning tunnelling microscopy (STM) and atomic force microscopy (AFM). The papers by Bolotov, Hamilton and Dunstan demonstrate that the STM can be employed for local electrical measurements as well as imaging, as illustrated by the examples of deposited clusters, model semiconductor structures and real

  10. de Sitter Extremal Surfaces

    CERN Document Server

    Narayan, K

    2015-01-01

    We study extremal surfaces in de Sitter space in the Poincare slicing in the upper patch, anchored on spatial subregions at the future boundary ${\\cal I}^+$, restricted to constant boundary Euclidean time slices (focussing on strip subregions). We find real extremal surfaces of minimal area as the boundaries of past lightcone wedges of the subregions in question: these are null surfaces with vanishing area. We find also complex extremal surfaces as complex extrema of the area functional, and the area is not always real-valued. In $dS_4$ the area is real and has some structural resemblance with entanglement entropy in a dual $CFT_3$. There are parallels with analytic continuation from the Ryu-Takayanagi expressions for holographic entanglement entropy in $AdS$. We also discuss extremal surfaces in the $dS$ black brane and the de Sitter "bluewall" studied previously. The $dS_4$ black brane complex surfaces exhibit a real finite cutoff-independent extensive piece. In the bluewall geometry, there are real surface...

  11. Dynamics at Surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Sylvia Ceyer, Nancy Ryan Gray

    2010-05-04

    The 2009 Gordon Conference on Dynamics at Surfaces is the 30th anniversary of a meeting held every two years that is attended by leading researchers in the area of experimental and theoretical dynamics at liquid and solid surfaces. The conference focuses on the dynamics of the interaction of molecules with either liquid or solid surfaces, the dynamics of the outermost layer of liquid and solid surfaces and the dynamics at the liquid-solid interface. Specific topics that are featured include state-to-state dynamics, non-adiabatic interactions in molecule-metal systems, photon induced desorption from semiconductor and metal surfaces, ultrafast x-ray and electron diffraction as probes of the dynamics of ablation, ultrafast vibrational spectroscopy of water surface dynamics, dynamics of a single adsorbate, growth at nano-scale mineral surfaces, dynamics of atom recombination on interstellar dust grains and the dynamics of the interaction of water with lipid bilayers. The conference brings together investigators from a variety of scientific disciplines including chemistry, physics, materials science, geology and biophysics.

  12. Surface modes in physics

    CERN Document Server

    Sernelius, Bo E

    2011-01-01

    Electromagnetic surface modes are present at all surfaces and interfaces between material of different dielectric properties. These modes have very important effects on numerous physical quantities: adhesion, capillary force, step formation and crystal growth, the Casimir effect etc. They cause surface tension and wetting and they give rise to forces which are important e.g. for the stability of colloids.This book is a useful and elegant approach to the topic, showing how the concept of electromagnetic modes can be developed as a unifying theme for a range of condensed matter physics. The

  13. Advanced Surface Technology

    DEFF Research Database (Denmark)

    Møller, Per; Nielsen, Lars Pleht

    This new significant book on advanced modern surface technology in all its variations, is aimed at both teaching at engineering schools and practical application in industry. The work covers all the significant aspects of modern surface technology and also describes how new advanced techniques make......, nitriding, carbonitriding, and many other lesser-known thermochemical processes used for solving technological problems. The book is richly illustrated with pictures and figures showing how the technology creates new innovative solutions for industry and how surfaces are becoming integral to the function...

  14. Nonlinear surface electromagnetic phenomena

    CERN Document Server

    Ponath, H-E

    1991-01-01

    In recent years the physics of electromagnetic surface phenomena has developed rapidly, evolving into technologies for communications and industry, such as fiber and integrated optics. The variety of phenomena based on electromagnetism at surfaces is rich and this book was written with the aim of summarizing the available knowledge in selected areas of the field. The book contains reviews written by solid state and optical physicists on the nonlinear interaction of electromagnetic waves at and with surfaces and films. Both the physical phenomena and some potential applications are

  15. Localized Acoustic Surface Modes

    KAUST Repository

    Farhat, Mohamed

    2015-08-04

    We introduce the concept of localized acoustic surface modes (ASMs). We demonstrate that they are induced on a two-dimensional cylindrical rigid surface with subwavelength corrugations under excitation by an incident acoustic plane wave. Our results show that the corrugated rigid surface is acoustically equivalent to a cylindrical scatterer with uniform mass density that can be represented using a Drude-like model. This, indeed, suggests that plasmonic-like acoustic materials can be engineered with potential applications in various areas including sensing, imaging, and cloaking.

  16. Surface science techniques

    CERN Document Server

    Walls, JM

    2013-01-01

    This volume provides a comprehensive and up to the minute review of the techniques used to determine the nature and composition of surfaces. Originally published as a special issue of the Pergamon journal Vacuum, it comprises a carefully edited collection of chapters written by specialists in each of the techniques and includes coverage of the electron and ion spectroscopies, as well as the atom-imaging methods such as the atom probe field ion microscope and the scanning tunnelling microscope. Surface science is an important area of study since the outermost surface layers play a crucial role

  17. Architectural Knitted Surfaces

    DEFF Research Database (Denmark)

    Mossé, Aurélie

    2010-01-01

    WGSN reports from the Architectural Knitted Surfaces workshop recently held at ShenkarCollege of Engineering and Design, Tel Aviv, which offered a cutting-edge insight into interactive knitted surfaces. With the increasing role of smart textiles in architecture, the Architectural Knitted Surfaces...... workshop brought together architects and interior and textile designers to highlight recent developments in intelligent knitting. The five-day workshop was led by architects Ayelet Karmon and Mette Ramsgaard Thomsen, together with Amir Cang and Eyal Sheffer from the Knitting Laboratory, in collaboration...... with Amir Marcowitz and Yair Reshef for their expertise in interaction design....

  18. Land Surface Weather Observations

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — METAR is the international standard code format for hourly surface weather observations. The acronym roughly translates from French as Aviation Routine Weather...

  19. Uruguay - Surface Weather Observations

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Surface weather observation forms for 26 stations in Uruguay. Period of record 1896-2005, with two to eight observations per day. Files created through a...

  20. Mexico - Surface Weather Observations

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Mexican Surface Daily Observations taken at 94 observatories located throughout Mexico, beginning in 1872 and going up through 1981. The data resided on paper...

  1. Surface Plasmon Based Spectrometer

    Science.gov (United States)

    Wig, Andrew; Passian, Ali; Boudreaux, Philip; Ferrell, Tom

    2008-03-01

    A spectrometer that uses surface plasmon excitation in thin metal films to separate light into its component wavelengths is described. The use of surface plasmons as a dispersive medium sets this spectrometer apart from prism, grating, and interference based variants and allows for the miniaturization of this device. Theoretical and experimental results are presented for two different operation models. In the first case surface plasmon tunneling in the near field is used to provide transmission spectra of different broad band-pass, glass filters across the visible wavelength range with high stray-light rejection at low resolution as well as absorption spectra of chlorophyll extracted from a spinach leaf. The second model looks at the far field components of surface plasmon scattering.

  2. Characterisation of Functional Surfaces

    DEFF Research Database (Denmark)

    Lonardo, P.M.; De Chiffre, Leonardo; Bruzzone, A.A.

    2004-01-01

    Characterisation of surfaces is of fundamental importance to control the manufacturing process and the functional performance of the part. Many applications concern contact and tribology problems, which include friction, wear and lubrication. This paper presents the techniques and instruments for...

  3. Iowa Bedrock Surface Elevation

    Data.gov (United States)

    Iowa State University GIS Support and Research Facility — This Digital Elevation Model (DEM) of the bedrock surface elevation in Iowa was compiled using all available data, principally information from GEOSAM, supplemented...

  4. Superhydrophobic Porous Silicon Surfaces

    Directory of Open Access Journals (Sweden)

    Paolo NENZI

    2011-12-01

    Full Text Available In this paper, we present an inexpensive technique to produce superhydrophobic surfaces from porous silicon. Superhydrophobic surfaces are a key technology for their ability to reduce friction losses in microchannels and their self cleaning properties. The morphology of a p-type silicon wafer is modified by a electrochemical wet etch to produce pores with controlled size and distribution and coated with a silane hydrophobic layer. Surface morphology is characterized by means of scanning electron microscope images. Large contact angles are observed on such surfaces and the results are compared with classical wetting models (Cassie and Wenzel suggesting a mixed Wenzel-Cassie behavior. The presented technique represents a cost-effective means for friction reduction in microfluidic applications, such as lab-on-a-chip.

  5. Triangulation of NURBS Surfaces

    Science.gov (United States)

    Samareh-Abolhassani, Jamshid

    1994-01-01

    A technique is presented for triangulation of NURBS surfaces. This technique is built upon an advancing front technique combined with grid point projection. This combined approach has been successfully implemented for structured and unstructured grids.

  6. Surface Tension of Spacetime

    Science.gov (United States)

    Perko, Howard

    2017-01-01

    Concepts from physical chemistry and more specifically surface tension are introduced to spacetime. Lagrangian equations of motion for membranes of curved spacetime manifold are derived. The equations of motion in spatial directions are dispersion equations and can be rearranged to Schrodinger's equation where Plank's constant is related to membrane elastic modulus. The equation of motion in the time-direction has two immediately recognizable solutions: electromagnetic waves and corpuscles. The corpuscular membrane solution can assume different genus depending on quantized amounts of surface energy. A metric tensor that relates empty flat spacetime to energetic curved spacetime is found that satisfies general relativity. Application of the surface tension to quantum electrodynamics and implications for quantum chromodynamics are discussed. Although much work remains, it is suggested that spacetime surface tension may provide a classical explanation that combines general relativity with field theories in quantum mechanics and atomic particle physics.

  7. CHEMILUMINESCENCE ON OXIDE SURFACE

    OpenAIRE

    L. I. IVANKIV; O. V. DZYUPYN; O.A. Balitskii

    2008-01-01

    This paper describes the oxygen adsorption properties on magnesium oxide surface. The results are compared with theoretical adsorption kinetics. Temperature and time dependences of adsorption mechanisms and chemiluminescence are discussed.

  8. Surface Protonics Promotes Catalysis

    Science.gov (United States)

    Manabe, R.; Okada, S.; Inagaki, R.; Oshima, K.; Ogo, S.; Sekine, Y.

    2016-12-01

    Catalytic steam reforming of methane for hydrogen production proceeds even at 473 K over 1 wt% Pd/CeO2 catalyst in an electric field, thanks to the surface protonics. Kinetic analyses demonstrated the synergetic effect between catalytic reaction and electric field, revealing strengthened water pressure dependence of the reaction rate when applying an electric field, with one-third the apparent activation energy at the lower reaction temperature range. Operando-IR measurements revealed that proton conduction via adsorbed water on the catalyst surface occurred during electric field application. Methane was activated by proton collision at the Pd-CeO2 interface, based on the inverse kinetic isotope effect. Proton conduction on the catalyst surface plays an important role in methane activation at low temperature. This report is the first describing promotion of the catalytic reaction by surface protonics.

  9. Triangulation of NURBS Surfaces

    Science.gov (United States)

    Samareh-Abolhassani, Jamshid

    1994-01-01

    A technique is presented for triangulation of NURBS surfaces. This technique is built upon an advancing front technique combined with grid point projection. This combined approach has been successfully implemented for structured and unstructured grids.

  10. Analyzing earth's surface data

    Science.gov (United States)

    Barr, D. J.; Elifrits, C. D.

    1979-01-01

    Manual discusses simple inexpensive image analysis technique used to interpret photographs and scanner of data of Earth's surface. Manual is designed for those who have no need for sophisticated computer-automated analysis procedures.

  11. Lunar Surface Navigation Project

    Data.gov (United States)

    National Aeronautics and Space Administration — To support extended lunar operations, precision localization and route mapping is required for planetary EVA, manned rovers and lunar surface mobility units. A...

  12. Asteroid Surface Geophysics

    CERN Document Server

    Murdoch, Naomi; Schwartz, Stephen R; Miyamoto, Hideaki

    2015-01-01

    The regolith-covered surfaces of asteroids preserve records of geophysical processes that have occurred both at their surfaces and sometimes also in their interiors. As a result of the unique micro-gravity environment that these bodies posses, a complex and varied geophysics has given birth to fascinating features that we are just now beginning to understand. The processes that formed such features were first hypothesised through detailed spacecraft observations and have been further studied using theoretical, numerical and experimental methods that often combine several scientific disciplines. These multiple approaches are now merging towards a further understanding of the geophysical states of the surfaces of asteroids. In this chapter we provide a concise summary of what the scientific community has learned so far about the surfaces of these small planetary bodies and the processes that have shaped them. We also discuss the state of the art in terms of experimental techniques and numerical simulations that...

  13. Biological surface science

    Science.gov (United States)

    Kasemo, Bengt

    2002-03-01

    Biological surface science (BioSS), as defined here is the broad interdisciplinary area where properties and processes at interfaces between synthetic materials and biological environments are investigated and biofunctional surfaces are fabricated. Six examples are used to introduce and discuss the subject: Medical implants in the human body, biosensors and biochips for diagnostics, tissue engineering, bioelectronics, artificial photosynthesis, and biomimetic materials. They are areas of varying maturity, together constituting a strong driving force for the current rapid development of BioSS. The second driving force is the purely scientific challenges and opportunities to explore the mutual interaction between biological components and surfaces. Model systems range from the unique water structures at solid surfaces and water shells around proteins and biomembranes, via amino and nucleic acids, proteins, DNA, phospholipid membranes, to cells and living tissue at surfaces. At one end of the spectrum the scientific challenge is to map out the structures, bonding, dynamics and kinetics of biomolecules at surfaces in a similar way as has been done for simple molecules during the past three decades in surface science. At the other end of the complexity spectrum one addresses how biofunctional surfaces participate in and can be designed to constructively participate in the total communication system of cells and tissue. Biofunctional surfaces call for advanced design and preparation in order to match the sophisticated (bio) recognition ability of biological systems. Specifically this requires combined topographic, chemical and visco-elastic patterns on surfaces to match proteins at the nm scale and cells at the micrometer scale. Essentially all methods of surface science are useful. High-resolution (e.g. scanning probe) microscopies, spatially resolved and high sensitivity, non-invasive optical spectroscopies, self-organizing monolayers, and nano- and microfabrication

  14. Dyakonov surface waves

    DEFF Research Database (Denmark)

    Takayama, Osamu; Crasovan, Lucian Cornel; Johansen, Steffen Kjær;

    2008-01-01

    The interface of two semi-infinite media, where at least one of them is a birefringent crystal, supports a special type of surface wave that was predicted theoretically by D'yakonov in 1988. Since then, the properties of such waves, which exist in transparent media only under very special......, the existence of these surface waves in specific material examples is analyzed, discussing the challenge posed by their experimental observation....

  15. Large Curved Surface Measurement

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The measurement principle of large curved surface through theodolite industry survey system is introduced. Two methods are suggested with respect to the distribution range of curved surface error. The experiments show that the measurement precision can be up to 0.15mm with relative precision of 3×10-5. Finally, something needed paying attention to and the application aspects on theodolite industry survey system are given.

  16. Triangulating Trimmed NURBS Surfaces

    Science.gov (United States)

    2000-01-01

    Curve and Surface Design: Saint-Malo 1999 381 Pierre-Jean Laurent, Paul Sablonnibre, and Larry L. Schumaker ( eds .), pp. 381-388. Copyright 0 2000 by...the boundary of its neighboring surface. References 1. Baehmann, P. L., S. L. Wittchen , M. S. Shephard, K. R. Grice and M. A. Yerry, Robust...and D. Eppstein, Mesh generation and optimal triangulation, in Computing in Euclidean Geometry, 2nd ed ., D.-Z. Du and F. K. Hwang, ( eds .), World

  17. Computer aided surface representation

    Energy Technology Data Exchange (ETDEWEB)

    Barnhill, R.E.

    1989-02-09

    The central research problem of this project is the effective representation and display of surfaces, interpolating to given information, in three or more dimensions. In a typical problem, we wish to create a surface from some discrete information. If this information is itself on another surface, the problem is to determine a surface defined on a surface,'' which is discussed below. Often, properties of an already constructed surface are desired: such geometry processing'' is described below. The Summary of Proposed Research from our original proposal describes the aims of this research project. This Summary and the Table of Contents from the original proposal are enclosed as an Appendix to this Progress Report. The broad sweep from constructive mathematics through algorithms and computer graphics displays is utilized in the research. The wide range of activity, directed in both theory and applications, makes this project unique. Last month in the first Ardent Titan delivered in the State of Arizona came to our group, funded by the DOE and Arizona State University. Although the Titan is a commercial product, its newness requires our close collaboration with Ardent to maximize results. During the past year, four faculty members and several graduate research assistants have worked on this DOE project. The gaining of new professionals is an important aspect of this project. A listing of the students and their topics is given in the Appendix. The most significant publication during the past year is the book, Curves and Surfaces for Computer Aided Geometric Design, by Dr. Gerald Farin. This 300 page volume helps fill a considerable gap in the subject and includes many new results on Bernstein-Bezier curves and surfaces.

  18. Surface Mediated Photocatalysis.

    Science.gov (United States)

    1987-12-01

    Bipolar Photoelectrodes," M.A. Fox, Nouv. J. Chim. 1987, II, 129. 4. "Effect of Cosolvent Additives on Relative Rates of Photooxidation on...Semiconductor Surfaces," D.D. Sackett, M.A. Fox, J. Phys. Org. Chem, 19_8, in press. 5. "Selectivity in the Semiconductor-Mediated Photooxidation of Polyols ...surfaced properties of the heteropolytungstates were varied. The conceptual mechanistic picture involved in the heteropolyoxo induced photooxidations

  19. Multifunctional thin film surface

    Energy Technology Data Exchange (ETDEWEB)

    Brozik, Susan M.; Harper, Jason C.; Polsky, Ronen; Wheeler, David R.; Arango, Dulce C.; Dirk, Shawn M.

    2015-10-13

    A thin film with multiple binding functionality can be prepared on an electrode surface via consecutive electroreduction of two or more aryl-onium salts with different functional groups. This versatile and simple method for forming multifunctional surfaces provides an effective means for immobilization of diverse molecules at close proximities. The multifunctional thin film has applications in bioelectronics, molecular electronics, clinical diagnostics, and chemical and biological sensing.

  20. Biochemically responsive smart surface.

    Science.gov (United States)

    Rios, Fabian; Smirnov, Sergei

    2009-04-01

    A design of smart surfaces responsive to biochemical analytes is demonstrated in the example of mixed monolayers of biotin/fluorocarbon. The contact angle of aqueous solutions on such surfaces decreases upon streptavidin binding and can be used in detecting this protein. The specificity of the effect is confirmed by the lack of a contact angle change by streptavidin blocked with biotin and by bovine serum albumin.

  1. Counting curves on surfaces

    OpenAIRE

    2015-01-01

    In this paper we consider an elementary, and largely unexplored, combinatorial problem in low-dimensional topology. Consider a real 2-dimensional compact surface $S$, and fix a number of points $F$ on its boundary. We ask: how many configurations of disjoint arcs are there on $S$ whose boundary is $F$? We find that this enumerative problem, counting curves on surfaces, has a rich structure. For instance, we show that the curve counts obey an effective recursion, in the general framework of to...

  2. Ocean surface wind stress

    Science.gov (United States)

    Harrison, D. E.

    1984-01-01

    The need for improved surface wind and wind stress data is discussed. The collection of wind data using ship reports, research buoys, and cloud motion vectors is examined. The need for data on surface-wind stress fields is emphasized. Accurate stress data are required for studying: (1) the normal seasonal cycle and the intraannual events; (2) wind stress curls and the forcing of ocean circulation; (3) El Nino events; and (4) the low response of the midlatitude ocean circulation.

  3. Antibacterial Au nanostructured surfaces

    Science.gov (United States)

    Wu, Songmei; Zuber, Flavia; Brugger, Juergen; Maniura-Weber, Katharina; Ren, Qun

    2016-01-01

    We present here a technological platform for engineering Au nanotopographies by templated electrodeposition on antibacterial surfaces. Three different types of nanostructures were fabricated: nanopillars, nanorings and nanonuggets. The nanopillars are the basic structures and are 50 nm in diameter and 100 nm in height. Particular arrangement of the nanopillars in various geometries formed nanorings and nanonuggets. Flat surfaces, rough substrate surfaces, and various nanostructured surfaces were compared for their abilities to attach and kill bacterial cells. Methicillin-resistant Staphylococcus aureus, a Gram-positive bacterial strain responsible for many infections in health care system, was used as the model bacterial strain. It was found that all the Au nanostructures, regardless their shapes, exhibited similar excellent antibacterial properties. A comparison of live cells attached to nanotopographic surfaces showed that the number of live S. aureus cells was health care system, was used as the model bacterial strain. It was found that all the Au nanostructures, regardless their shapes, exhibited similar excellent antibacterial properties. A comparison of live cells attached to nanotopographic surfaces showed that the number of live S. aureus cells was information (ESI) available. See DOI: 10.1039/c5nr06157a

  4. Mars Surface Environmental Issues

    Science.gov (United States)

    Charles, John

    2002-01-01

    Planetary exploration by astronauts will require extended periods of habitation on a planet's surface, under the influence of environmental factors that are different from those of Earth and the spacecraft that delivered the crew to the planet. Human exploration of Mars, a possible near-term planetary objective, can be considered a challenging scenario. Mission scenarios currently under consideration call for surface habitation periods of from 1 to 18 months on even the earliest expeditions. Methods: Environmental issues associated with Mars exploration have been investigated by NASA and the National Space Biomedical Research Institute (NSBRI) as part of the Bioastronautics Critical Path Roadmap Project (see http ://criticalpath.jsc.nasa.gov). Results: Arrival on Mars will immediately expose the crew to gravity only 38% of that at Earth's surface in possibly the first prolonged exposure to gravity other than the 1G of Earth's surface and the zero G of weightless space flight, with yet unknown effects on crew physiology. The radiation at Mars' surface is not well documented, although the planet's bulk and even its thin atmosphere may moderate the influx of galactic cosmic radiation and energetic protons from solar flares. Secondary radiation from activated components of the soil must also be considered. Ultrafine and larger respirable and nonrespirable particles in Martian dust introduced into the habitat after surface excursions may induce pulmonary inflammation exacerbated by the additive reactive and oxidizing nature of the dust. Stringent decontamination cannot eliminate mechanical and corrosive effects of the dust on pressure suits and exposed machinery. The biohazard potential of putative indigenous Martian microorganisms may be assessed by comparison with analog environments on Earth. Even in their absence, human microorganisms, if not properly controlled, can be a threat to the crew's health. Conclusions: Mars' surface offers a substantial challenge to the

  5. Surface chemistry theory and applications

    CERN Document Server

    Bikerman, J J

    2013-01-01

    Surface Chemistry Theory and Applications focuses on liquid-gas, liquid-liquid, solid-gas, solid-liquid, and solid-solid surfaces. The book first offers information on liquid-gas surfaces, including surface tension, measurement of surface tension, rate of capillarity rise, capillary attraction, bubble pressure and pore size, and surface tension and temperature. The text then ponders on liquid-liquid and solid-gas surfaces. Discussions focus on surface energy of solids, surface roughness and cleanness, adsorption of gases and vapors, adsorption hysteresis, interfacial tension, and interfacial t

  6. Theory of Digitized Conjugate Surface and Solution to Conjugate Surface

    Institute of Scientific and Technical Information of China (English)

    Xiao Lai-yuan; Liao Dao-xun; Yi Chuan-yun

    2004-01-01

    In order to meet the needs of designing and processing digitized surfaces, the method to spreading digitized surface has been proposed. The key technique is to solve the problem of digitized conjugate surface. In the paper, the digitized conjugate surface was theoretically investigated, and the solution of conjugate surface based on digitized surface was also studied. The digitized conjugate surface theory was then proposed, and applied to build the model of solving conjugate surface based on digitized surface. A corresponding algorithm was developed. This paper applies the software Conjugater-1.0 that is developed by ourselves to compute the digitized conjugate surfaces of the drum-tooth surface. This study provides theoretical and technical bases for analyzing engagement of digitized surface, simulation and numerical processing technique.

  7. Molecular chirality at surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Ernst, Karl-Heinz [Empa, Swiss Federal Laboratories for Materials Science and Technology, Ueberlandstrasse 129, 8600 Duebendorf (Switzerland); Organic Chemistry Institute, University Zurich, 8057 Zuerich (Switzerland)

    2012-11-15

    With the adsorption of larger molecules being increasingly tackled by surface scientists, the aspect of chirality often plays a role. This paper gives a topical review of molecular chirality at surfaces and gives a phenomenological overview of different aspects of adsorption and self-assembly of chiral and prochiral molecules and the principles of mirror-symmetry breaking at a surface. After a brief introduction into the history of molecular chirality and the important role it played for understanding the spatial structure of molecules, definitions of chirality are presented. Topics treated here are principle ways to create single chiral adsorbates, chiral ensembles, and monolayers by achiral molecules, adsorption of intrinsically chiral molecules at achiral and chiral surfaces, long-range symmetry breaking in two-dimensional (2D) crystals due to additional chiral bias, chiral restructuring of solid surfaces under the influence of chiral molecules, switching the handedness of adsorbates, and chirality at the liquid/air interface. An outlook onto further potential research directions and recommendations for further reading, including nonsurface-related sources of chiral topics completes this paper. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  8. Stability of surface nanobubbles

    Science.gov (United States)

    Maheshwari, Shantanu; van der Hoef, Martin; Zhang, Xuehua; Lohse, Detlef

    2015-11-01

    We have studied the stability and dissolution of surface nanobubbles on the chemical heterogenous surface by performing Molecular Dynamics (MD) simulations of binary mixture consists of Lennard-Jones (LJ) particles. Recently our group has derived the exact expression for equilibrium contact angle of surface nanobubbles as a function of oversaturation of the gas concentration in bulk liquid and the lateral length of bubble. It has been showed that the contact line pinning and the oversaturation of gas concentration in bulk liquid is crucial in the stability of surface nanobubbles. Our simulations showed that how pinning of the three-phase contact line on the chemical heterogenous surface lead to the stability of the nanobubble. We have calculated the equilibrium contact angle by varying the gas concentration in bulk liquid and the lateral length of the bubble. Our results showed that the equilibrium contact angle follows the expression derived analytically by our group. We have also studied the bubble dissolution dynamics and showed the ''stick-jump'' mechanism which was also observed experimentally in case of dissolution of nanodrops.

  9. Iron oxide surfaces

    Science.gov (United States)

    Parkinson, Gareth S.

    2016-03-01

    The current status of knowledge regarding the surfaces of the iron oxides, magnetite (Fe3O4), maghemite (γ-Fe2O3), haematite (α-Fe2O3), and wüstite (Fe1-xO) is reviewed. The paper starts with a summary of applications where iron oxide surfaces play a major role, including corrosion, catalysis, spintronics, magnetic nanoparticles (MNPs), biomedicine, photoelectrochemical water splitting and groundwater remediation. The bulk structure and properties are then briefly presented; each compound is based on a close-packed anion lattice, with a different distribution and oxidation state of the Fe cations in interstitial sites. The bulk defect chemistry is dominated by cation vacancies and interstitials (not oxygen vacancies) and this provides the context to understand iron oxide surfaces, which represent the front line in reduction and oxidation processes. Fe diffuses in and out from the bulk in response to the O2 chemical potential, forming sometimes complex intermediate phases at the surface. For example, α-Fe2O3 adopts Fe3O4-like surfaces in reducing conditions, and Fe3O4 adopts Fe1-xO-like structures in further reducing conditions still. It is argued that known bulk defect structures are an excellent starting point in building models for iron oxide surfaces. The atomic-scale structure of the low-index surfaces of iron oxides is the major focus of this review. Fe3O4 is the most studied iron oxide in surface science, primarily because its stability range corresponds nicely to the ultra-high vacuum environment. It is also an electrical conductor, which makes it straightforward to study with the most commonly used surface science methods such as photoemission spectroscopies (XPS, UPS) and scanning tunneling microscopy (STM). The impact of the surfaces on the measurement of bulk properties such as magnetism, the Verwey transition and the (predicted) half-metallicity is discussed. The best understood iron oxide surface at present is probably Fe3O4(100); the structure is

  10. Responsive acoustic surfaces

    DEFF Research Database (Denmark)

    Peters, Brady; Tamke, Martin; Nielsen, Stig Anton

    2011-01-01

    Acoustic performance is defined by the parameter of reverberation time; however, this does not capture the acoustic experience in some types of open plan spaces. As many working and learning activities now take place in open plan spaces, it is important to be able to understand and design...... for the acoustic conditions of these spaces. This paper describes an experimental research project that studied the design processes necessary to design for sound. A responsive acoustic surface was designed, fabricated and tested. This acoustic surface was designed to create specific sonic effects. The design...... was simulated using custom integrated acoustic software and also using Odeon acoustic analysis software. The research demonstrates a method for designing space- and sound-defining surfaces, defines the concept of acoustic subspace, and suggests some new parameters for defining acoustic subspaces....

  11. Wetting and Minimal Surfaces

    CERN Document Server

    Bachas, C; Wiese, K J; Bachas, Constantin; Doussal, Pierre Le; Wiese, Kay Joerg

    2006-01-01

    We study minimal surfaces which arise in wetting and capillarity phenomena. Using conformal coordinates, we reduce the problem to a set of coupled boundary equations for the contact line of the fluid surface, and then derive simple diagrammatic rules to calculate the non-linear corrections to the Joanny-de Gennes energy. We argue that perturbation theory is quasi-local, i.e. that all geometric length scales of the fluid container decouple from the short-wavelength deformations of the contact line. This is illustrated by a calculation of the linearized interaction between contact lines on two opposite parallel walls. We present a simple algorithm to compute the minimal surface and its energy based on these ideas. We also point out the intriguing singularities that arise in the Legendre transformation from the pure Dirichlet to the mixed Dirichlet-Neumann problem.

  12. Surface-water surveillance

    Energy Technology Data Exchange (ETDEWEB)

    Saldi, K.A.; Dirkes, R.L.; Blanton, M.L.

    1995-06-01

    This section of the 1994 Hanford Site Environmental Report summarizes the Surface water on and near the Hanford Site is monitored to determine the potential effects of Hanford operations. Surface water at Hanford includes the Columbia River, riverbank springs, ponds located on the Hanford Site, and offsite water systems directly east and across the Columbia River from the Hanford Site, and offsite water systems directly east and across the Columbia River from the Hanford Site. Columbia River sediments are also included in this discussion. Tables 5.3.1 and 5.3.2 summarize the sampling locations, sample types, sampling frequencies, and sample analyses included in surface-water surveillance activities during 1994. Sample locations are also identified in Figure 5.3.1. This section describes the surveillance effort and summarizes the results for these aquatic environments. Detailed analytical results are reported by Bisping (1995).

  13. Surface modification of bioceramics

    Science.gov (United States)

    Monkawa, Akira

    Hydroxyapatite [Ca10(PO4)6(OH)2, HAp] is a major inorganic component of bone and teeth tissues and has the excellent biocompatibility and high osteoconductivity. The interactions between HAp and protein or cell have been studied. The HAp related bioceramics such as bone substitute, coating substance of metal implants, inorganic-polymer composites, and cell culture. We described two methods; (1) surface modification of HAp using organosilane; (2) fabrication of HAp ultra-thin layer on gold surface for protein adsorption analyzed with QCM-D technique. The interfacial interaction between collagen and HAp in a nano-region was controlled by depositing the organosilane of n-octadecyltrimethoxysilane (ODS: -CH3) or aminopropyltriethoxysilane (APTS: -NH2) with a chemical vapor deposition method. The morphologies of collagen adsorbed on the surfaces of HAp and HAp deposited with APTS were similar, however that of the surface with ODS was apparently different, due to the hydrophobic interaction between the organic head group of -CH3 and residual groups of collagen. We present a method for coating gold quartz crystal microbalance with dissipation (QCM-D) sensor with ultra-thin layer of hydroxyapatite nanocrystals evenly covering and tightly bound to the surface. The hydroxyapatite sensor operated in liquid with high stability and sensitivity. The in-situ adsorption mechanism and conformational change of fibrinogen on gold, titanium and hydroxyapatite surfaces were investigated by QCM-D technique and Fourier-transform infrared spectroscopy. The study indicates that the hydroxyapatite sensor is applicable for qualitative and conformational analysis of protein adsorption.

  14. Surface Aesthetics and Analysis.

    Science.gov (United States)

    Çakır, Barış; Öreroğlu, Ali Rıza; Daniel, Rollin K

    2016-01-01

    Surface aesthetics of an attractive nose result from certain lines, shadows, and highlights with specific proportions and breakpoints. Analysis emphasizes geometric polygons as aesthetic subunits. Evaluation of the complete nasal surface aesthetics is achieved using geometric polygons to define the existing deformity and aesthetic goals. The relationship between the dome triangles, interdomal triangle, facet polygons, and infralobular polygon are integrated to form the "diamond shape" light reflection on the nasal tip. The principles of geometric polygons allow the surgeon to analyze the deformities of the nose, define an operative plan to achieve specific goals, and select the appropriate operative technique.

  15. Photochemistry on solid surfaces

    CERN Document Server

    Matsuura, T

    1989-01-01

    The latest developments in photochemistry on solid surfaces, i.e. photochemistry in heterogeneous systems, including liquid crystallines, are brought together for the first time in a single volume. Distinguished photochemists from various fields have contributed to the book which covers a number of important applications: molecular photo-devices for super-memory, photochemical vapor deposition to produce thin-layered electronic semiconducting materials, sensitive optical media, the control of photochemical reactions pathways, etc. Photochemistry on solid surfaces is now a major field and this

  16. Quantitative Hydrocarbon Surface Analysis

    Science.gov (United States)

    Douglas, Vonnie M.

    2000-01-01

    The elimination of ozone depleting substances, such as carbon tetrachloride, has resulted in the use of new analytical techniques for cleanliness verification and contamination sampling. The last remaining application at Rocketdyne which required a replacement technique was the quantitative analysis of hydrocarbons by infrared spectrometry. This application, which previously utilized carbon tetrachloride, was successfully modified using the SOC-400, a compact portable FTIR manufactured by Surface Optics Corporation. This instrument can quantitatively measure and identify hydrocarbons from solvent flush of hardware as well as directly analyze the surface of metallic components without the use of ozone depleting chemicals. Several sampling accessories are utilized to perform analysis for various applications.

  17. Surface science techniques

    CERN Document Server

    Bracco, Gianangelo

    2013-01-01

    The book describes the experimental techniques employed to study surfaces and interfaces. The emphasis is on the experimental method. Therefore all chapters start with an introduction of the scientific problem, the theory necessary to understand how the technique works and how to understand the results. Descriptions of real experimental setups, experimental results at different systems are given to show both the strength and the limits of the technique. In a final part the new developments and possible extensions of the techniques are presented. The included techniques provide microscopic as well as macroscopic information. They cover most of the techniques used in surface science.

  18. Surface and nanomolecular catalysis

    CERN Document Server

    Richards, Ryan

    2006-01-01

    Using new instrumentation and experimental techniques that allow scientists to observe chemical reactions and molecular properties at the nanoscale, the authors of Surface and Nanomolecular Catalysis reveal new insights into the surface chemistry of catalysts and the reaction mechanisms that actually occur at a molecular level during catalysis. While each chapter contains the necessary background and explanations to stand alone, the diverse collection of chapters shows how developments from various fields each contributed to our current understanding of nanomolecular catalysis as a whole. The

  19. Solid lubricants and surfaces

    CERN Document Server

    Braithwaite, E R

    1964-01-01

    Solid Lubricants and Surfaces deals with the theory and use of solid lubricants, particularly in colloidal form. Portions of this book are devoted to graphite and molybdenum disulfides, which are widely used solid lubricants in colloidal form. An extensive literature on the laboratory examination of hundreds of solids as potential lubricants is also provided in this text. Other topics discussed include the metals and solid lubricants; techniques for examining surfaces; other solid lubricants; metal shaping; and industrial uses of solid-lubricant dispersions. This publication is beneficial to e

  20. Quantizing Earth surface deformations

    Directory of Open Access Journals (Sweden)

    C. O. Bowin

    2015-03-01

    Full Text Available The global analysis of Bowin (2010 used the global 14 absolute Euler pole set (62 Myr history from Gripp and Gordon (1990 and demonstrated that plate tectonics conserves angular momentum. We herein extend that analysis using the more detailed Bird (2003 52 present-day Euler pole set (relative to a fixed Pacific plate for the Earth's surface, after conversion to absolute Euler poles. Additionally, new analytical results now provide new details on upper mantle mass anomalies in the outer 200 km of the Earth, as well as an initial quantizing of surface deformations.

  1. Surface-Mediated Photocatalysis

    Science.gov (United States)

    1992-02-04

    Photocatalysis 6. AUTHOR(S) DIMarye Anne Fox E -LECTE ’ / 7. PERFORMING ORGANIZATION NAME(S) AND AD ES). 8. PERFORMING ORGANIZATION REPORT NUMBER University of...Form 298 (Rev 2-89) Prescr d bv ANJ std Z39.1s 291-102 j Final Report on Surface-Mediated Photocatalysis "a,. . ARO Proposal No. 28298-CH u - Work from...Produced by Anodic Oxidation and by Photoelectrochemical Activation of TiO2 ," Marye Anne Fox and Karl L. Worthen, Chem. Mater. 1991, 3, 253. "Surface

  2. Biofunctional surface engineering

    CERN Document Server

    Scholz, Martin

    2014-01-01

    PrefaceRegulatory issuesSterilization of combination devicesPolyelectrolyte monolayers (I)Polyelectrolyte monolayers (II)Surface modificationsThree dimensional characterization of immobilized biomolecules Aptamers for biofunctionalization of stentsCoating of implants with antibioticsMicroneedles and nanopatchesfor vaccinationMicrochips for antibody binding analysesBiofunctionalized wound dressingsExtracorporeal device for trapping circulating tumor cellsOutlook

  3. Predictive Surface Complexation Modeling

    Energy Technology Data Exchange (ETDEWEB)

    Sverjensky, Dimitri A. [Johns Hopkins Univ., Baltimore, MD (United States). Dept. of Earth and Planetary Sciences

    2016-11-29

    Surface complexation plays an important role in the equilibria and kinetics of processes controlling the compositions of soilwaters and groundwaters, the fate of contaminants in groundwaters, and the subsurface storage of CO2 and nuclear waste. Over the last several decades, many dozens of individual experimental studies have addressed aspects of surface complexation that have contributed to an increased understanding of its role in natural systems. However, there has been no previous attempt to develop a model of surface complexation that can be used to link all the experimental studies in order to place them on a predictive basis. Overall, my research has successfully integrated the results of the work of many experimentalists published over several decades. For the first time in studies of the geochemistry of the mineral-water interface, a practical predictive capability for modeling has become available. The predictive correlations developed in my research now enable extrapolations of experimental studies to provide estimates of surface chemistry for systems not yet studied experimentally and for natural and anthropogenically perturbed systems.

  4. Characterisation of Functional Surfaces

    DEFF Research Database (Denmark)

    Lonardo, P.M.; De Chiffre, Leonardo; Bruzzone, A.A.

    2004-01-01

    for characterisation of surfaces, discussing their operating principles and metrological properties. A review of the conventional 2D and new 3D roughness parameters is given, considering both the current standards and new proposals for texture quantification, with a particular attention to the methods orientated...

  5. Copernicus: Lunar surface mapper

    Science.gov (United States)

    Redd, Frank J.; Anderson, Shaun D.

    1992-01-01

    The Utah State University (USU) 1991-92 Space Systems Design Team has designed a Lunar Surface Mapper (LSM) to parallel the development of the NASA Office of Exploration lunar initiatives. USU students named the LSM 'Copernicus' after the 16th century Polish astronomer, for whom the large lunar crater on the face of the moon was also named. The top level requirements for the Copernicus LSM are to produce a digital map of the lunar surface with an overall resolution of 12 meters (39.4 ft). It will also identify specified local surface features/areas to be mapped at higher resolutions by follow-on missions. The mapping operation will be conducted from a 300 km (186 mi) lunar-polar orbit. Although the entire surface should be mapped within six months, the spacecraft design lifetime will exceed one year with sufficient propellant planned for orbit maintenance in the anomalous lunar gravity field. The Copernicus LSM is a small satellite capable of reaching lunar orbit following launch on a Conestoga launch vehicle which is capable of placing 410 kg (900 lb) into translunar orbit. Upon orbital insertion, the spacecraft will weigh approximately 233 kg (513 lb). This rather severe mass constraint has insured attention to component/subsystem size and mass, and prevented 'requirements creep.' Transmission of data will be via line-of-sight to an earth-based receiving system.

  6. Multiband frequency selective surface

    Science.gov (United States)

    Wu, Te-Kao

    1998-10-01

    This paper addresses the similarity of microwave/millimeter wave frequency selective surfaces (FSS) to optical filters. Specifically, the design approaches of the 4-band FSSs developed for NASA's CASSINI high gain antenna are described in detail. Representative RF test results are given to demonstrate the validity of these designs. These design approaches are very general and can be applied to multiband optical filters.

  7. Wetting of real surfaces

    CERN Document Server

    Bormashenko, Edward Yu

    2013-01-01

    The problem of wetting and drop dynamics on various surfaces is very interesting from both the scientificas well as thepractical viewpoint, and subject of intense research.The results are scattered across papers in journals, sothis workwill meet the need for a unifying, comprehensive work.

  8. Paneling architectural freeform surfaces

    KAUST Repository

    Eigensatz, Michael

    2010-07-26

    The emergence of large-scale freeform shapes in architecture poses big challenges to the fabrication of such structures. A key problem is the approximation of the design surface by a union of patches, socalled panels, that can be manufactured with a selected technology at reasonable cost, while meeting the design intent and achieving the desired aesthetic quality of panel layout and surface smoothness. The production of curved panels is mostly based on molds. Since the cost of mold fabrication often dominates the panel cost, there is strong incentive to use the same mold for multiple panels. We cast the major practical requirements for architectural surface paneling, including mold reuse, into a global optimization framework that interleaves discrete and continuous optimization steps to minimize production cost while meeting user-specified quality constraints. The search space for optimization is mainly generated through controlled deviation from the design surface and tolerances on positional and normal continuity between neighboring panels. A novel 6-dimensional metric space allows us to quickly compute approximate inter-panel distances, which dramatically improves the performance of the optimization and enables the handling of complex arrangements with thousands of panels. The practical relevance of our system is demonstrated by paneling solutions for real, cutting-edge architectural freeform design projects. © 2010 ACM.

  9. A Thermochromic Superhydrophobic Surface

    Science.gov (United States)

    Cataldi, Pietro; Bayer, Ilker S.; Cingolani, Roberto; Marras, Sergio; Chellali, Ryad; Athanassiou, Athanassia

    2016-01-01

    Highly enhanced solid-state thermochromism is observed in regioregular poly(3-hexylthiophene), P3HT, when deposited on a superhydrophobic polymer-SiO2 nanocomposite coating. The conformal P3HT coating on the nanocomposite surface does not alter or reduce superhydrophicity while maintaining its reversible enhanced thermochromism. The polymeric matrix of the superhydrophobic surface is comprised of a blend of poly(vinylidene fluoride-co-hexafluoropropylene) copolymer and an acrylic adhesive. Based on detailed X-ray diffraction measurements, this long-lasting, repeatable and hysteresis-free thermochromic effect is attributed to the enhancement of the Bragg peak associated with the d-spacing of interchain directional packing (100) which remains unaltered during several heating-cooling cycles. We propose that the superhydrophobic surface confines π–π interchain stacking in P3HT with uniform d-spacing into its nanostructured texture resulting in better packing and reduction in face-on orientation. The rapid response of the system to sudden temperature changes is also demonstrated by water droplet impact and bounce back on heated surfaces. This effect can be exploited for embedded thin film temperature sensors for metal coatings. PMID:27301422

  10. Designing Superoleophobic Surfaces (Postprint)

    Science.gov (United States)

    2007-12-07

    recent experiments show that even the wax on the lotus leaf surface is weakly hydrophilic with q ≈ 74° (29). The superhydrophobic state of these...fibers (14), and spherical arrays of poly(tetrafluoroethylene) ( PTFE ) particles (17), as well as superhydrophobicity obtained on a hydrophilic substrate

  11. Surface Nanobubbles Nucleate Microdroplets

    NARCIS (Netherlands)

    Zhang, Xuehua; Lhuissier, Henri; Sun, Chao; Lohse, Detlef

    2014-01-01

    When a hydrophobic solid is in contact with water, surface nanobubbles often form at the interface. They have a lifetime many orders of magnitude longer than expected. Here, we show that they even withstand a temperature increase to temperatures close to the boiling point of bulk water; i.e., they d

  12. Paneling architectural freeform surfaces

    KAUST Repository

    Eigensatz, Michael

    2010-07-25

    The emergence of large-scale freeform shapes in architecture poses big challenges to the fabrication of such structures. A key problem is the approximation of the design surface by a union of patches, so-called panels, that can be manufactured with a selected technology at reasonable cost, while meeting the design intent and achieving the desired aesthetic quality of panel layout and surface smoothness. The production of curved panels is mostly based on molds. Since the cost of mold fabrication often dominates the panel cost, there is strong incentive to use the same mold for multiple panels. We cast the major practical requirements for architectural surface paneling, including mold reuse, into a global optimization framework that interleaves discrete and continuous optimization steps to minimize production cost while meeting user-specified quality constraints. The search space for optimization is mainly generated through controlled deviation from the design surface and tolerances on positional and normal continuity between neighboring panels. A novel 6-dimensional metric space allows us to quickly compute approximate inter-panel distances, which dramatically improves the performance of the optimization and enables the handling of complex arrangements with thousands of panels. The practical relevance of our system is demonstrated by paneling solutions for real, cutting-edge architectural freeform design projects.

  13. Surface explosion cavities

    CERN Document Server

    Benusiglio, Adrien; Clanet, Christophe

    2012-01-01

    We present a fluid dynamics video on cavities created by explosions of firecrackers at the water free surface. We use three types of firecrackers containing 1, 1.3 and 5 g of flash powder. The firecrackers are held with their center at the surface of water in a cubic meter pool. The movies are recorded from the side with a high-speed video camera. Without confinement the explosion produces an hemispherical cavity. Right after the explosion this cavity grows isotropically, the bottom then stops while the sides continue to expand. In the next phase the bottom of the cavity accelerates backwards to the surface. During this phase the convergence of the flow creates a central jet that rises above the free surface. In the last part of the video the explosion is confined in a vertical open tube made of glass and of centimetric diameter. The explosion creates a cylindrical cavity that develops towards the free end of the tube. Depending on the charge, the cavity can either stop inside the tube or at its exit, but nev...

  14. Dyakonov surface waves

    DEFF Research Database (Denmark)

    Takayama, Osamu; Crasovan, Lucian Cornel; Johansen, Steffen Kjær

    2008-01-01

    The interface of two semi-infinite media, where at least one of them is a birefringent crystal, supports a special type of surface wave that was predicted theoretically by D'yakonov in 1988. Since then, the properties of such waves, which exist in transparent media only under very special conditi...

  15. Effective Free Surfaces

    Science.gov (United States)

    Yapalparvi, Ramesh; Protas, Bartosz

    2010-11-01

    In this investigation we introduce the concept of an "effective free surface" arising as a solution of time--averaged equations in the presence of free boundaries. This work is motivated by applications of optimization theory to problems involving free surfaces, such as droplets impinging on the weld pool surface in welding processes. In such problems the time--dependent governing equations lead to technical difficulties, many of which are alleviated when methods of optimization are applied to a steady problem with effective free surfaces. The corresponding equations are obtained by performing the Reynolds decomposition and averaging of the time--dependent free--boundary equations based on the volume--of--fluid (VoF) formalism. We identify the terms representing the average effect of fluctuating free boundaries which, in analogy with the Reynolds stresses in classical turbulence models, need to be modelled and propose some simple algebraic closures for these terms. We argue that effective free boundaries can be computed using methods of shape optimization and present some results.

  16. Scraped surface heat exchangers.

    Science.gov (United States)

    Rao, Chetan S; Hartel, Richard W

    2006-01-01

    Scraped surface heat exchangers (SSHEs) are commonly used in the food, chemical, and pharmaceutical industries for heat transfer, crystallization, and other continuous processes. They are ideally suited for products that are viscous, sticky, that contain particulate matter, or that need some degree of crystallization. Since these characteristics describe a vast majority of processed foods, SSHEs are especially suited for pumpable food products. During operation, the product is brought in contact with a heat transfer surface that is rapidly and continuously scraped, thereby exposing the surface to the passage of untreated product. In addition to maintaining high and uniform heat exchange, the scraper blades also provide simultaneous mixing and agitation. Heat exchange for sticky and viscous foods such as heavy salad dressings, margarine, chocolate, peanut butter, fondant, ice cream, and shortenings is possible only by using SSHEs. High heat transfer coefficients are achieved because the boundary layer is continuously replaced by fresh material. Moreover, the product is in contact with the heating surface for only a few seconds and high temperature gradients can be used without the danger of causing undesirable reactions. SSHEs are versatile in the use of heat transfer medium and the various unit operations that can be carried out simultaneously. This article critically reviews the current understanding of the operations and applications of SSHEs.

  17. A Thermochromic Superhydrophobic Surface

    Science.gov (United States)

    Cataldi, Pietro; Bayer, Ilker S.; Cingolani, Roberto; Marras, Sergio; Chellali, Ryad; Athanassiou, Athanassia

    2016-06-01

    Highly enhanced solid-state thermochromism is observed in regioregular poly(3-hexylthiophene), P3HT, when deposited on a superhydrophobic polymer-SiO2 nanocomposite coating. The conformal P3HT coating on the nanocomposite surface does not alter or reduce superhydrophicity while maintaining its reversible enhanced thermochromism. The polymeric matrix of the superhydrophobic surface is comprised of a blend of poly(vinylidene fluoride-co-hexafluoropropylene) copolymer and an acrylic adhesive. Based on detailed X-ray diffraction measurements, this long-lasting, repeatable and hysteresis-free thermochromic effect is attributed to the enhancement of the Bragg peak associated with the d-spacing of interchain directional packing (100) which remains unaltered during several heating-cooling cycles. We propose that the superhydrophobic surface confines π–π interchain stacking in P3HT with uniform d-spacing into its nanostructured texture resulting in better packing and reduction in face-on orientation. The rapid response of the system to sudden temperature changes is also demonstrated by water droplet impact and bounce back on heated surfaces. This effect can be exploited for embedded thin film temperature sensors for metal coatings.

  18. Designing durable icephobic surfaces.

    Science.gov (United States)

    Golovin, Kevin; Kobaku, Sai P R; Lee, Duck Hyun; DiLoreto, Edward T; Mabry, Joseph M; Tuteja, Anish

    2016-03-01

    Ice accretion has a negative impact on critical infrastructure, as well as a range of commercial and residential activities. Icephobic surfaces are defined by an ice adhesion strength τice deicing cycles, thermal cycling, accelerated corrosion, and exposure to Michigan wintery conditions over several months.

  19. Surface Traffic Management Research

    Science.gov (United States)

    Jung, Yoo Chul

    2012-01-01

    This presentation discusses an overview of the surface traffic management research conducted by NASA Ames. The concept and human-in-the-loop simulation of the Spot and Runway Departure Advisor (SARDA), an integrated decision support tool for the tower controllers and airline ramp operators, is also discussed.

  20. Titan's surface and atmosphere

    Science.gov (United States)

    Hayes, Alexander G.; Soderblom, Jason M.; Ádámkovics, Máté

    2016-05-01

    Since its arrival in late 2004, the NASA/ESA Cassini-Huygens mission to Saturn has revealed Titan to be a world that is both strange and familiar. Titan is the only extraterrestrial body known to support standing bodies of stable liquid on its surface and, along with Earth and early Mars, is one of three places in the Solar System known to have had an active hydrologic cycle. With atmospheric pressures of 1.5 bar and temperatures of 90-95 K at the surface, methane and ethane condense out of Titan's nitrogen-dominated atmosphere and flow as liquids on the surface. Despite vast differences in environmental conditions and materials from Earth, Titan's methane-based hydrologic cycle drives climatic and geologic processes which generate landforms that are strikingly similar to their terrestrial counterparts, including vast equatorial dunes, well-organized channel networks that route material through erosional and depositional landscapes, and lakes and seas of liquid hydrocarbons. These similarities make Titan a natural laboratory for studying the processes that shape terrestrial landscapes and drive climates, probing extreme conditions impossible to recreate in earthbound laboratories. Titan's exotic environment ensures that even rudimentary measurements of atmospheric/surface interactions, such as wind-wave generation or aeolian dune development, provide valuable data to anchor physical models.

  1. Surface Water in Hawaii

    Science.gov (United States)

    Oki, Delwyn S.

    2003-01-01

    Surface water in Hawaii is a valued resource as well as a potential threat to human lives and property. The surface-water resources of Hawaii are of significant economic, ecologic, cultural, and aesthetic importance. Streams supply more than 50 percent of the irrigation water in Hawaii, and although streams supply only a few percent of the drinking water statewide, surface water is the main source of drinking water in some places. Streams also are a source of hydroelectric power, provide important riparian and instream habitats for many unique native species, support traditional and customary Hawaiian gathering rights and the practice of taro cultivation, and possess valued aesthetic qualities. Streams affect the physical, chemical, and aesthetic quality of receiving waters, such as estuaries, bays, and nearshore waters, which are critical to the tourism-based economy of the islands. Streams in Hawaii pose a danger because of their flashy nature; a stream's stage, or water level, can rise several feet in less than an hour during periods of intense rainfall. Streams in Hawaii are flashy because rainfall is intense, drainage basins are small, basins and streams are steep, and channel storage is limited. Streamflow generated during periods of heavy rainfall has led to loss of property and human lives in Hawaii. Most Hawaiian streams originate in the mountainous interiors of the islands and terminate at the coast. Streams are significant sculptors of the Hawaiian landscape because of the erosive power of the water they convey. In geologically young areas, such as much of the southern part of the island of Hawaii, well-defined stream channels have not developed because the permeability of the surface rocks generally is so high that rainfall infiltrates before flowing for significant distances on the surface. In geologically older areas that have received significant rainfall, streams and mass wasting have carved out large valleys.

  2. Fluoroalkylated Silicon-Containing Surfaces - Estimation of Solid Surface Energy

    Science.gov (United States)

    2010-10-20

    oleophobicity , solid surface energy, Zisman analysis, Girifalco-Good method 4 Introduction In the recent past, there have been a number of reports on...surfaces that are not wetted by liquid droplets, i. e. superhydrophobic,1-4 oleophobic ,5-15 hygrophobic,16 omniphobic7, 12 surfaces. These surfaces have

  3. Contact of surfaces and contact characteristics of offset surfaces

    Institute of Scientific and Technical Information of China (English)

    Lixin CAO; Hu GONG; Jian LIU

    2008-01-01

    Based on differential geometry, the contact problems of two surfaces are discussed in this paper. The relationship between the contact status of two sur-faces and that of offset surfaces are also analyzed. For a 5-axis NC machining, some research such as optimization of cutter location and calculation of the geometrical cusp height are important. The research results indicate that the relative normal curvature is an important geometrical invariant for describing the contact state of two surfaces. For point contact two surfaces, the calculation equation for the second order remained error is given. For line contact two surfaces, the condition of the second order line contact is that the principal directions and curvatures of the two surfaces are the same along the contact curve. If two surfaces keep the second order line contact, their two offset surfaces will also keep the second order line contact, and their third order remained errors are also uniform with that of the two offset surfaces.

  4. Introduction to Theoretical Surface Science

    Science.gov (United States)

    2007-07-01

    111), (100) and (110) surfaces in the fcc structure even for the hcp metals Y, Zr, Tc and Ru and for the bcc metals Nb and Mo. (a) surface energy in eV...surface energies have been calculated for the fcc structure , even for the hcp metals Y, Zr, Tc and Ru and for the bcc metals Nb and Mo. The surface

  5. Drop Impact on Superheated Surfaces

    NARCIS (Netherlands)

    Tran, A.T.; Staat, H.J.J.; Prosperetti, A.; Sun, C.; Lohse, D.

    2012-01-01

    At the impact of a liquid droplet on a smooth surface heated above the liquid’s boiling point, the droplet either immediately boils when it contacts the surface (“contact boiling”), or without any surface contact forms a Leidenfrost vapor layer towards the hot surface and bounces back (“gentle film

  6. Smart, passive sun facing surfaces

    Science.gov (United States)

    Hively, Lee M.

    1996-01-01

    An article adapted for selectively utilizing solar radiation comprises an absorptive surface and a reflective surface, the absorptive surface and the reflective surface oriented to absorb solar radiation when the sun is in a relatively low position, and to reflect solar radiation when the sun is in a relatively high position.

  7. Approximation of Surfaces by Cylinders

    DEFF Research Database (Denmark)

    Randrup, Thomas

    1998-01-01

    We present a new method for approximation of a given surface by a cylinder surface. It is a constructive geometric method, leading to a monorail representation of the cylinder surface. By use of a weighted Gaussian image of the given surface, we determine a projection plane. In the orthogonal...

  8. Hydrological land surface modelling

    DEFF Research Database (Denmark)

    Ridler, Marc-Etienne Francois

    to imperfect model forecasts. It remains a crucial challenge to account for system uncertainty, so as to provide model outputs accompanied by a quantified confidence interval. Properly characterizing and reducing uncertainty opens-up the opportunity for risk-based decision-making and more effective emergency...... and disaster management. The objective of this study is to develop and investigate methods to reduce hydrological model uncertainty by using supplementary data sources. The data is used either for model calibration or for model updating using data assimilation. Satellite estimates of soil moisture and surface...... temperature are explored in a multi-objective calibration experiment to optimize the parameters in a SVAT model in the Sahel. The two satellite derived variables were effective at constraining most land-surface and soil parameters. A data assimilation framework is developed and implemented with an integrated...

  9. Surface Plasmon Nanophotonics

    CERN Document Server

    Brongersma, Mark L

    2007-01-01

    The development of advanced dielectric photonic structures has enabled tremendous control over the propagation and manipulation of light. Structures such as waveguides, splitters, mixers, and resonators now play a central role in the telecommunications industry. This book will discuss an exciting new class of photonic devices, known as surface plasmon nanophotonic structures. Surface plasmons are easily accessible excitations in metals and semiconductors and involve a collective motion of the conduction electrons. These excitations can be exploited to manipulate electromagnetic waves at optical frequencies ("light") in new ways that are unthinkable in conventional dielectric structures. The field of plasmon nanophotonics is rapidly developing and impacting a wide range of areas including: electronics, photonics, chemistry, biology, and medicine. The book will highlight several exciting new discoveries that have been made, while providing a clear discussion of the underlying physics, the nanofabrication issues...

  10. Anatomically Correct Surface Recovery

    DEFF Research Database (Denmark)

    Jensen, Rasmus Ramsbøl; Nielsen, Jannik Boll; Larsen, Rasmus

    2015-01-01

    using the learned statistics. A quantitative evaluation is performed on a data set of 10 laser scans of ear canal impressions with minimal noise and artificial holes. We also present a qualitative evaluation on authentic partial scans from an actual direct in ear scanner prototype. Compared to a state......We present a method for 3D surface recovery in partial surface scans. The method is based on an Active Shape Model, which is used to predict missing data. The model is constructed using a bootstrap framework, where an initially small collection of hand-annotated samples is used to fit...... to and register unknown samples, resulting in an extensive statistical model. The statistical recovery uses a multivariate point prediction, where the distribution of the points is given by the Active Shape Model. We show how missing data in a partial scan, once point correspondence is achieved, can be predicted...

  11. Surface Acoustic Wave Devices

    DEFF Research Database (Denmark)

    Dühring, Maria Bayard

    of a Mach-Zehnder interferometer (MZI). This is an optical device consisting if one waveguide that is split into two waveguide arms which are assembled again later on. By applying the mechanical field from a SAW the light in the two arms can be modulated and interfere constructively and destructively......The work of this project is concerned with the simulation of surface acoustic waves (SAW) and topology optimization of SAW devices. SAWs are elastic vibrations that propagate along a material surface and are extensively used in electromechanical filters and resonators in telecommunication. A new...... application is modulation of optical waves in waveguides. This presentation elaborates on how a SAW is generated by interdigital transducers using a 2D model of a piezoelectric, inhomogeneous material implemented in the high-level programming language Comsol Multiphysics. The SAW is send through a model...

  12. Surfaces on African sculpture

    Directory of Open Access Journals (Sweden)

    John Mack

    2011-12-01

    Full Text Available Review of: Leonard Kahan, Donna Page, and Pascal James Imperato (eds in collaboration with Charles Bordogna and Bolaji Campbell with an introduction by Patrick McNaughton, Surfaces: Color, Substances, and Ritual Applications on African Sculpture, Indiana University Press, 2009.The book reviewed here has potential interest to a wide range of readers, whether researchers and academics, museum, curators, conservators or connoisseurs. It examines the perception of surface as an aspect of the indigenous understanding of sculpted objects in sub-Saharan Africa, treating of questions of materials, patination, colouration and use. It includes both survey essays and case studies (on the Bamana of Mali and the Yoriuba of Nigeria in a compendium which has suggestive implications beyond the immediate field of the Africanists to whom it is principally addressed.

  13. Secure surface identification codes

    Science.gov (United States)

    Beekhof, F.; Voloshynovskiy, S.; Koval, O.; Villan, R.; Pun, T.

    2008-02-01

    This paper introduces an identification framework for random microstructures of material surfaces. These microstructures represent a kind of unique fingerprints that can be used to track and trace an item as well as for anti-counterfeiting. We first consider the architecture for mobile phone-based item identification and then introduce a practical identification algorithm enabling fast searching in large databases. The proposed algorithm is based on reference list decoding. The link to digital communications and robust perceptual hashing is shown. We consider a practical construction of reference list decoding, which comprizes computational complexity, security, memory storage and performance requirements. The efficiency of the proposed algorithm is demonstrated on experimental data obtained from natural paper surfaces.

  14. Localization on Hopf surfaces

    CERN Document Server

    Assel, Benjamin; Martelli, Dario

    2014-01-01

    We discuss localization of the path integral for supersymmetric gauge theories with an R-symmetry on Hermitian four-manifolds. After presenting the localization locus equations for the general case, we focus on backgrounds with S^1 x S^3 topology, admitting two supercharges of opposite R-charge. These are Hopf surfaces, with two complex structure moduli p,q. We compute the localized partition function on such Hopf surfaces, allowing for a very large class of Hermitian metrics, and prove that this is proportional to the supersymmetric index with fugacities p,q. Using zeta function regularisation, we determine the exact proportionality factor, finding that it depends only on p,q, and on the anomaly coefficients a, c of the field theory. This may be interpreted as a supersymmetric Casimir energy, and provides the leading order contribution to the partition function in a large N expansion.

  15. Surface Plasmon Singularities

    Directory of Open Access Journals (Sweden)

    Gabriel Martínez-Niconoff

    2012-01-01

    Full Text Available With the purpose to compare the physical features of the electromagnetic field, we describe the synthesis of optical singularities propagating in the free space and on a metal surface. In both cases the electromagnetic field has a slit-shaped curve as a boundary condition, and the singularities correspond to a shock wave that is a consequence of the curvature of the slit curve. As prototypes, we generate singularities that correspond to fold and cusped regions. We show that singularities in free space may generate bifurcation effects while plasmon fields do not generate these kinds of effects. Experimental results for free-space propagation are presented and for surface plasmon fields, computer simulations are shown.

  16. Pocked surface neutron detector

    Energy Technology Data Exchange (ETDEWEB)

    McGregor, Douglas (Whitmore Lake, MI); Klann, Raymond (Bolingbrook, IL)

    2003-04-08

    The detection efficiency, or sensitivity, of a neutron detector material such as of Si, SiC, amorphous Si, GaAs, or diamond is substantially increased by forming one or more cavities, or holes, in its surface. A neutron reactive material such as of elemental, or any compound of, .sup.10 B, .sup.6 Li, .sup.6 LiF, U, or Gd is deposited on the surface of the detector material so as to be disposed within the cavities therein. The portions of the neutron reactive material extending into the detector material substantially increase the probability of an energetic neutron reaction product in the form of a charged particle being directed into and detected by the neutron detector material.

  17. Anionic surface binders

    Directory of Open Access Journals (Sweden)

    Aljaž-Rožič Mateja

    2004-01-01

    Full Text Available The MELAMIN Chemical Factory in Kočevje manufactures synthetic resins and binders for the paper industry. Binders based on AKD (alkyl ketene dimer are produced which are used for binding paper and cardboard in the range of neutral and partially basic pH. Cationic and, lately, anionic binders are mostly used for the bulk binding of paper and board. The possibility of using AKD binders on paper or board surfaces is presented. In this case partially cationic AKD binders may be applied. When optical whiteners are used, the application of AKD binders is recommended. In the case of paper it is possible to substitute acrylate binders by AKD binders. The best results are obtained when the paper is first partly treated in bulk and subsequently surface treated.

  18. Helical surface structures

    CERN Document Server

    Brandenburg, A; Brandenburg, Axel; Blackman, Eric G.

    2002-01-01

    Over the past few years there has been growing interest in helical magnetic field structures seen at the solar surface, in coronal mass ejections, as well as in the solar wind. Although there is a great deal of randomness in the data, on average the extended structures are mostly left-handed on the northern hemisphere and right-handed on the southern. Surface field structures are also classified as dextral (= right bearing) and sinistral (= left bearing) occurring preferentially in the northern and southern hemispheres respectively. Of particular interest here is a quantitative measurement of the associated emergence rates of helical structures, which translate to magnetic helicity fluxes. In this review, we give a brief survey of what has been found so far and what is expected based on models. Particular emphasis is put on the scale dependence of the associated fields and an attempt is made to estimate the helicity flux of the mean field vs. fluctuating field.

  19. Minimal surfaces for architectural constructions

    Directory of Open Access Journals (Sweden)

    Velimirović Ljubica S.

    2008-01-01

    Full Text Available Minimal surfaces are the surfaces of the smallest area spanned by a given boundary. The equivalent is the definition that it is the surface of vanishing mean curvature. Minimal surface theory is rapidly developed at recent time. Many new examples are constructed and old altered. Minimal area property makes this surface suitable for application in architecture. The main reasons for application are: weight and amount of material are reduced on minimum. Famous architects like Otto Frei created this new trend in architecture. In recent years it becomes possible to enlarge the family of minimal surfaces by constructing new surfaces.

  20. Tensor Impedance Surfaces

    Science.gov (United States)

    2010-11-30

    ELECTROMAGNEETIC SURFACE IMPEDANCE PROPERTIES FA9550-09-C-0198 DR. ADOUR KABAKIAN HUGHES RESEARCH LABS AFOSR / RSE 875 North Randolph Street, Suit...325 Room 3112 Arlington, Virginia 22203-1768 AFOSR / RSE AFRL-OSR-VA-TR-2012-0770 Distribution A We have investigated and determined how the tensor...the case of a TM wave, which favors propagation along the shorter principal axis. Standard terms apply U U U UU Arje Nachman RSE (Program Manager

  1. From Loops to Surfaces

    CERN Document Server

    Neuberger, H

    2010-01-01

    The generating function for all antisymmetric characters of a Wilson loop matrix in SU(N) Yang Mills theory is the partition function of a fermion living on the curve describing the loop. This generalizes to fermion subsystems living on higher dimensional submanifolds, for example, surfaces. This write-up also contains some extra background, in response to some questions raised during the oral presentation.

  2. Riemann surface and quantization

    Science.gov (United States)

    Perepelkin, E. E.; Sadovnikov, B. I.; Inozemtseva, N. G.

    2017-01-01

    This paper proposes an approach of the unified consideration of classical and quantum mechanics from the standpoint of the complex analysis effects. It turns out that quantization can be interpreted in terms of the Riemann surface corresponding to the multivalent LnΨ function. A visual interpretation of "trajectories" of the quantum system and of the Feynman's path integral is presented. A magnetic dipole having a magnetic charge that satisfies the Dirac quantization rule was obtained.

  3. Surface electrical properties experiment

    Science.gov (United States)

    Simmons, Gene; Strangway, David; Annan, Peter; Baker, Richard G.; Bannister, Lawrence; Brown, Raymon; Cooper, William; Cubley, Dean; deBettencourt, Joseph; England, Anthony W.; Groener, John; Kong, Jin-Au; LaTorraca, Gerald; Meyer, James; Nanda, Ved; Redman, David; Rossiter, James; Tsang, Leung; Urner, Joseph; Watts, Raymond

    1973-01-01

    The surface electrical properties (SEP) experiment was used to explore the subsurface material of the Apollo 17 landing site by means of electromagnetic radiation. The experiment was designed to detect electrical layering, discrete scattering bodies, and the possible presence of water. From the analysis of the data, it was expected that values of the electrical properties (dielectric constant and loss tangent) of lunar material in situ would be obtained.

  4. Water on graphene surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Gordillo, M C [Departamento de Sistemas Fisicos, Quimicos y Naturales, Facultad de Ciencias Experimentales, Universidad Pablo de Olavide, Carretera de Utrera, km 1, E-41013 Sevilla (Spain); Marti, J, E-mail: cgorbar@upo.e, E-mail: jordi.marti@upc.ed [Departament de Fisica i Enginyeria Nuclear, Universitat Politecnica de Catalunya, B4-B5 Campus Nord, E-08034 Barcelona, Catalonia (Spain)

    2010-07-21

    In this paper, we summarize the main results obtained in our group about the behavior of water confined inside or close to different graphene surfaces by means of molecular dynamics simulations. These include the inside and outside of carbon nanotubes, and the confinement inside a slit pore or a single graphene sheet. We paid special attention to some thermodynamical (binding energies), structural (hydrogen-bond distributions) and dynamic (infrared spectra) properties, and their comparison to their bulk counterparts.

  5. Music Mixing Surface

    DEFF Research Database (Denmark)

    Gelineck, Steven; Büchert, Morten; Andersen, Jesper

    2013-01-01

    This paper presents a multi-touch based interface for mixing music. The goal of the interface is to provide users with a more intuitive control of the music mix by implementing the so-called stage metaphor control scheme, which is especially suitable for multi-touch surfaces. Specifically, we...... discuss functionality important for the professional music technician (main target user) - functionality, which is especially challenging to integrate when implementing the stage metaphor. Finally we propose and evaluate solutions to these challenges....

  6. Surface Mapping using Quadcopter

    OpenAIRE

    Haugen, Kenneth Eide

    2014-01-01

    This thesis studies the use of unmanned aerial vehicles to perform ice managementin the Arctic Ocean by gathering information about and physically control the iceenvironment. Such a system is needed for safety reasons as marine operations aremoving further north. In order to gather information about the ice environment, aUAV will be used for surface mapping. The quadcopter Parrot AR. Drone 2.0 will be used as a testbed for implementing proposed strategies for guidance, navigation and control ...

  7. Surface modification technology

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Wonbaek; Yu, Hyosin; Chung, Inwha; Rhee, Kang In; Choi, Good Sun; Lee, Chulkyung; Youn, In Ju; Chung, Jinki; Suh, Chang Youl; Yang, Dong Hyo [Korea Institute of Geology Mining and Materials, Taejon (Korea, Republic of)

    1997-12-01

    Domestic production of rare metals has not been achieved due to the low metal content in their ores in the nation. For these reasons, a strategy for the value addition of rare metal sponges by processes like vacuum melting should be seek to meet the growing domestic demand for titanium metals and alloys. However, current domestic market appears not to be sufficient enough for the large scale investment for the expensive vacuum-melting equipment. Besides, related ingot-processing technologies like rolling, extrusion, and forging of titanium should be prepared in advance. In the mean time, the attempt to recycle expensive titanium scraps produced in our nation would be worthwhile in view of the reduction of import from foreign countries and of saving valuable secondary resources. The objectives for this research is to develop a multipurpose inductively-coupled plasma enhanced-surface modification (ICPESM) process to upgrade powder products. Stable plasma was obtained by the impedance harmonization between plasma generator and matching networks maintaining the reflected power at near zero. The chamber vacuum went down to 10{sup -3} torr offering no difficulties to maintain 1.0 torr at which the present experiments were conducted. However, the fluidization in the chamber was unstable when operated in vacuum. The gas distributor and chamber design may need modifications. Argon plasma treatment on the titanium powders changed the surface morphology slightly even though the effect was not significant due possibly to the short treatment duration of 60 minutes. Oxygen plasma oxidized the surface of titanium powders to TiO{sub 2} as confirmed by XRD. The carbon black powders were clustered during oxidation treatment by the fluidization or surface activation by the high power of low temperature plasma. (author). 4 tabs., 15 figs.

  8. The geometry of surfaces contact

    Directory of Open Access Journals (Sweden)

    Siegl J.

    2007-11-01

    Full Text Available This contribution deals with a geometrical exact description of contact between two given surfaces which are defined by the vector functions. These surfaces are substituted at a contact point by approximate surfaces of the second order in accordance with the Taylor series and consequently there is derived a differential surface of these second order surfaces. Knowledge of principal normal curvatures, their directions and the tensor (Dupin indicatrix of this differential surface are necessary for description of contact of these surfaces. For description of surface geometry the first and the second surface fundamental tensor and a further methods of the differential geometry are used. A geometrical visualisation of obtained results of this analysis is made. Method and results of this study will be applied to contact analysis of tooth screw surfaces of screw machines.

  9. Single Crystal Surfaces

    Science.gov (United States)

    Aguilar-Santillan, Joaquin

    2014-06-01

    The present work studies (0001) Al2O3 and (111) Al2MgO4 wetting with pure molten Al by the sessile drop technique from 1073 K to 1473 K (800 °C to 1200 °C) under Ar at PO2 10-15 Pa. Al pure liquid wets a smooth and chemically homogeneous surface of an inert solid, the wetting driving force ( t, T) can be readily studied when surface solid roughness increases in the system. Both crystals planes (0001) Al2O3 and (111) Al2MgO4 have crystallographic surfaces with identical O-2 crystalline positions however considering Mg2+ content in Al2MgO4 structure may influence a reactive mode. Kinetic models results under similar experimental conditions show that Al wetting on (0001) Al2O3 is less reactive than (111) Al2MgO4, however at >1273 K (1000 °C) (0001) Al2O3 transformation occurs and a transition of wetting improves. The (111) Al2MgO4 and Al system promotes interface formations that slow its wetting process.

  10. Origamizing polyhedral surfaces.

    Science.gov (United States)

    Tachi, Tomohiro

    2010-01-01

    This paper presents the first practical method for "origamizing" or obtaining the folding pattern that folds a single sheet of material into a given polyhedral surface without any cut. The basic idea is to tuck fold a planar paper to form a three-dimensional shape. The main contribution is to solve the inverse problem; the input is an arbitrary polyhedral surface and the output is the folding pattern. Our approach is to convert this problem into a problem of laying out the polygons of the surface on a planar paper by introducing the concept of tucking molecules. We investigate the equality and inequality conditions required for constructing a valid crease pattern. We propose an algorithm based on two-step mapping and edge splitting to solve these conditions. The two-step mapping precalculates linear equalities and separates them from other conditions. This allows an interactive manipulation of the crease pattern in the system implementation. We present the first system for designing three-dimensional origami, enabling a user can interactively design complex spatial origami models that have not been realizable thus far.

  11. Surface analysis in microelectronics.

    Science.gov (United States)

    Pignataro, S

    1995-10-01

    The contribution given by surface analysis to solve some problems encountered in the production of electronic power devices have been discussed. Mainly two types of problems have been faced. One of these deal with interfacial chemistry. Three examples have been investigated. The first applies to the improvement of the quality and the reliability of plastic packages through the optimization of the resin/metal and resin/die adhesion. The second relies to the adhesion between polyimide and silicon nitride used in the multilevel technology. The third example refers to the so called die-attach process and related problems. Another area of interest in microelectronics is that of the erosion of various types of surfaces and the possibility of wrong etching. A few examples of the application of surface analytical techniques for these problems will be presented. XPS and SIMS working in imaging and multipoint analysis mode, scanning acoustic microscopy, contact angle measurements as well as peeling and tensile strength measurements are the main tools used to obtain useful data.

  12. Antifungal nanoparticles and surfaces.

    Science.gov (United States)

    Paulo, Cristiana S O; Vidal, Maria; Ferreira, Lino S

    2010-10-11

    Nosocomial fungal infections, an increasing healthcare concern worldwide, are often associated with medical devices. We have developed antifungal nanoparticle conjugates that can act in suspension or attach to a surface, efficiently killing fungi. For that purpose, we immobilized covalently amphotericin B (AmB), a potent antifungal agent approved by the FDA, widely used in clinical practice and effective against a large spectrum of fungi, into silica nanoparticles. These antifungal nanoparticle conjugates are fungicidal against several strains of Candida sp., mainly by contact. In addition, they can be reused up to 5 cycles without losing their activity. Our results show that the antifungal nanoparticle conjugates are more fungistatic and fungicidal than 10 nm colloidal silver. The antifungal activity of the antifungal nanoparticle conjugates is maintained when they are immobilized on a surface using a chemical adhesive formed by polydopamine. The antifungal nanocoatings have no hemolytic or cytotoxic effect against red blood cells and blood mononuclear cells, respectively. Surfaces coated with these antifungal nanoparticle conjugates can be very useful to render medical devices with antifungal properties.

  13. Amphoteric surface active agents

    Directory of Open Access Journals (Sweden)

    Eissa, A.M. F.

    1995-10-01

    Full Text Available 2-[trimethyl ammonium, triethyl ammonium, pyridinium and 2-amino pyridinium] alkanoates, four series of surface active agents containing carbon chain C12, C14, C16 and C18carbon atoms, were prepared. Their structures were characterized by microanalysis, infrared (IR and nuclear magnetic resonance (NMR. Surface and interfacial tension, Krafft point, wetting time, emulsification power, foaming height and critical micelle concentration (cmc were determined and a comparative study was made between their chemical structure and surface active properties. Antimicrobial activity of these surfactants was also determined.

    Se prepararon cuatro series de agentes tensioactivos del tipo 2-[trimetil amonio, trietil amonio, piridinio y 2-amino piridinio] alcanoatos, que contienen cadenas carbonadas con C12, C14, C16 y C18 átomos de carbono.
    Se determinaron la tensión superficial e interfacial, el punto de Krafft, el tiempo humectante, el poder de emulsionamiento, la altura espumante y la concentración critica de miscela (cmc y se hizo un estudio comparativo entre la estructura química y sus propiedades tensioactivas. Se determinó también la actividad antimicrobiana de estos tensioactivos. Estas estructuras se caracterizaron por microanálisis, infrarrojo (IR y resonancia magnética nuclear (RMN.

  14. Surface imaging microscope

    Science.gov (United States)

    Rogala, Eric W.; Bankman, Isaac N.

    2008-04-01

    The three-dimensional shapes of microscopic objects are becoming increasingly important for battlespace CBRNE sensing. Potential applications of microscopic 3D shape observations include characterization of biological weapon particles and manufacturing of micromechanical components. Aerosol signatures of stand-off lidar systems, using elastic backscatter or polarization, are dictated by the aerosol particle shapes and sizes that must be well characterized in the lab. A low-cost, fast instrument for 3D surface shape microscopy will be a valuable point sensor for biological particle sensing applications. Both the cost and imaging durations of traditional techniques such as confocal microscopes, atomic force microscopes, and electron scanning microscopes are too high. We investigated the feasibility of a low-cost, fast interferometric technique for imaging the 3D surface shape of microscopic objects at frame rates limited only by the camera in the system. The system operates at two laser wavelengths producing two fringe images collected simultaneously by a digital camera, and a specialized algorithm we developed reconstructs the surface map of the microscopic object. The current implementation assembled to test the concept and develop the new 3D reconstruction algorithm has 0.25 micron resolution in the x and y directions, and about 0.1 micron accuracy in the z direction, as tested on a microscopic glass test object manufactured with etching techniques. We describe the interferometric instrument, present the reconstruction algorithm, and discuss further development.

  15. Hemocompatibility of polymeric nanostructured surfaces.

    Science.gov (United States)

    Leszczak, Victoria; Smith, Barbara S; Popat, Ketul C

    2013-01-01

    Tissue integration is an important property when inducing transplant tolerance, however, the hemocompatibility of the biomaterial surface also plays an important role in the ultimate success of the implant. Therefore, in order to induce transplant tolerance, it is critical to understand the interaction of blood components with the material surfaces. In this study, we have investigated the adsorption of key blood serum proteins, in vitro adhesion and activation of platelets and clotting kinetics of whole blood on flat polycaprolactone (PCL) surfaces, nanowire (NW) surfaces and nanofiber (NF) surfaces. Previous studies have shown that polymeric nanostructured surfaces improve cell adhesion, proliferation and viability; however it is unclear how these polymeric nanostructured surfaces interact with the blood and its components. Protein adsorption results indicate that while there were no significant differences in total albumin (ALB) adsorption on PCL, NW and NF surfaces, NW surfaces had higher total fibrinogen (FIB) and immunoglobulin-G (IgG) adsorption compared to NF and PCL surfaces. In contrast, NF surfaces had higher surface FIB and IgG adsorption compared to PCL and NW surfaces. Platelet adhesion and viability studies show more adhesion and clustering of platelets on the NF surfaces as compared to PCL and NW surfaces. Platelet activation studies reveal that NW surfaces have the highest percentage of unactivated platelets, whereas NF surfaces have the highest percentage of fully activated platelets. Whole blood clotting results indicate that NW surfaces maintain an increased amount of free hemoglobin during the clotting process compared to PCL and NF surface, indicating less clotting and slower rate of clotting on their surfaces.

  16. Surface stress, surface elasticity, and the size effect in surface segregation

    DEFF Research Database (Denmark)

    Schmid, M.; Hofer, W.; Varga, P.;

    1995-01-01

    Surface stress and surface elasticity of low-index fcc surfaces have been studied using effective-medium theory potentials. In addition to total-energy calculations giving stress components and elastic data for the surface as a whole, the use of artificial atoms with modified size allows us...

  17. Essential Closed Surfaces in a Class of Surface Sum of I-Bundle of Closed Surfaces

    Institute of Scientific and Technical Information of China (English)

    Shu Xin WANG; Rui Feng QIU

    2011-01-01

    In this paper,we will characterize all types of essential closed surfaces in a class of surface sum of I-bundle of closed surfaces,and give an application of the classification in the surface sum of two 3-manifolds.

  18. Conversion from surface wave to surface wave on reflection

    DEFF Research Database (Denmark)

    Novitsky, Andrey

    2010-01-01

    We discuss the reflection and transmission of an incident surface wave to a pure surface wave state at another interface. This is allowed only for special media parameters: at least one of the media must be magnetic. We found such material characteristics that the obliquely incident surface wave...... can be transmitted without changing its direction (nevertheless the amplitude varies). For other media parameters, only normally incident surface waves can be converted to surface waves. We propose applications of the predicted conversion as a beam splitter and polarization filter for surface waves....

  19. Surface forces: Surface roughness in theory and experiment

    Energy Technology Data Exchange (ETDEWEB)

    Parsons, Drew F., E-mail: Drew.Parsons@anu.edu.au; Walsh, Rick B.; Craig, Vincent S. J. [Department of Applied Mathematics, Research School of Physical Sciences and Engineering, Australian National University, Canberra, ACT 0200 (Australia)

    2014-04-28

    A method of incorporating surface roughness into theoretical calculations of surface forces is presented. The model contains two chief elements. First, surface roughness is represented as a probability distribution of surface heights around an average surface height. A roughness-averaged force is determined by taking an average of the classic flat-surface force, weighing all possible separation distances against the probability distributions of surface heights. Second the model adds a repulsive contact force due to the elastic contact of asperities. We derive a simple analytic expression for the contact force. The general impact of roughness is to amplify the long range behaviour of noncontact (DLVO) forces. The impact of the elastic contact force is to provide a repulsive wall which is felt at a separation between surfaces that scales with the root-mean-square (RMS) roughness of the surfaces. The model therefore provides a means of distinguishing between “true zero,” where the separation between the average centres of each surface is zero, and “apparent zero,” defined by the onset of the repulsive contact wall. A normal distribution may be assumed for the surface probability distribution, characterised by the RMS roughness measured by atomic force microscopy (AFM). Alternatively the probability distribution may be defined by the histogram of heights measured by AFM. Both methods of treating surface roughness are compared against the classic smooth surface calculation and experimental AFM measurement.

  20. Theory of Solid Surfaces.

    Science.gov (United States)

    1976-05-01

    A~ —~ on 022 CAMBRIDGE UNIV (ENGLAND) CAVEND ISH LAB —. FIG 20/12 —“1THEORY OF SOLID SURFACES .(U) MAY 76 ~J C INKS ON, P W ANDERSON AF AFOSR...A~ D. ~ tLC .7~ ~~~~~~~ I In f or ~a t i oL O f f i c e r 111111 __________ ~~~~~~~~~~~~~~~ _________________ - -ii~ s ~~~~~~~~~~~~~ Abstract

  1. Surface effects in nucleation

    CERN Document Server

    Alekseechkin, Nikolay V

    2016-01-01

    The classical nucleation theory (CNT) concept of a nucleus as a fragment of the bulk new phase fails for nanosized nuclei. An extension of CNT taking into account the properties of the transition region between coexisting bulk phases is proposed. For this purpose, the finite-thickness layer method which is an alternative to the Gibbs one is used; the transition region is considered as a separate (surface) phase. An equation for the nucleation work is derived which is basic for the multivariable theory of nucleation.

  2. Surface-Shading Program

    Science.gov (United States)

    Plessel, Todd

    1991-01-01

    Surface Shading computer program, SURF, developed in support of work of Computational Fluid Dynamics (CFD). Part of CFD graphics software. Accepts input in form of grid and solution files otherwise normally fed to Ames Research Center's version of PLOT3D software from "flow solver" programs. Interactively creates wire-frame, shaded, and function-map parts viewed and then transferred to Ames Research Graphic (ARCGRAPH) standard files, animated with GAS (COSMIC Program ARC-12379). Written in C programming language and requires Silicon Graphics "include" files (e.g., stdio.h, gl.h).

  3. Surface Production of Ions

    Science.gov (United States)

    1992-05-26

    Hill, New York 1938) p. 60-64. 21. S. Dushman, Scientific Foundations of Vacuum Technique, Second Edition (John Wiley & Sons, New York, 1962) p. 91...hydrogen atom (or H + ion) from a metal surface is of funda- Liouville equation, whose solution involves the coupling ma- ’ Jonh . mental interest both from a...Appi. Phys. 50 (4), April 1979 IsB Chapman Glow Discharge Processes John Wiley and Sons New York, 1980 pp 114-115. -H. L. Cui, J. Vac. Sci. Tech. A 9

  4. Spacecraft Surface Charging Handbook

    Science.gov (United States)

    1992-11-01

    Briet, and A. L. Vampola of Aerospace Corporation , H. R. Anderson, A. Holman, and J. Manderesse of SAIC, L. Levy of CERT, R. Viswanathan, G. Barbay, P...camWat a8n truss piece comnat Proper truss to not possible, so eftend res and en OCYA"O axis 0 0 0 0 0 1 width 6 side 2 surface teflon surftce - teflon...p. 62, 1974. Rudie, N. J., et a]., Design Support Guide fior Radiation Hardening oif Space Electronics Svsitems. I RT Corporation , I RT 6409-001, 198

  5. Semiconductor surface protection material

    Science.gov (United States)

    Packard, R. D. (Inventor)

    1973-01-01

    A method and a product for protecting semiconductor surfaces is disclosed. The protective coating material is prepared by heating a suitable protective resin with an organic solvent which is solid at room temperature and converting the resulting solution into sheets by a conventional casting operation. Pieces of such sheets of suitable shape and thickness are placed on the semiconductor areas to be coated and heat and vacuum are then applied to melt the sheet and to drive off the solvent and cure the resin. A uniform adherent coating, free of bubbles and other defects, is thus obtained exactly where it is desired.

  6. Comparative study of the surface layer density of liquid surfaces

    Science.gov (United States)

    Chacón, E.; Fernández, E. M.; Duque, D.; Delgado-Buscalioni, R.; Tarazona, P.

    2009-11-01

    Capillary wave fluctuations blur the inherent structure of liquid surfaces in computer simulations. The intrinsic sampling method subtracts capillary wave fluctuations and yields the intrinsic surface structure, leading to a generic picture of the liquid surface. The most relevant magnitude of the method is the surface layer density ns that may be consistently determined from different properties: the layering structure of the intrinsic density profiles, the turnover rate for surface layer particles, and the hydrodynamic damping rate of capillary waves. The good agreement among these procedures provides evidence for the physical consistency of the surface layering hypothesis, as an inherent physical property of the liquid surfaces. The dependence of the surface compactness, roughness, and exchange rate with temperature is analyzed for several molecular interaction models.

  7. Surface Chemistry in Nanoscale Materials

    Directory of Open Access Journals (Sweden)

    Alex V. Hamza

    2009-12-01

    Full Text Available Although surfaces or, more precisely, the surface atomic and electronic structure, determine the way materials interact with their environment, the influence of surface chemistry on the bulk of the material is generally considered to be small. However, in the case of high surface area materials such as nanoporous solids, surface properties can start to dominate the overall material behavior. This allows one to create new materials with physical and chemical properties that are no longer determined by the bulk material, but by their nanoscale architectures. Here, we discuss several examples, ranging from nanoporous gold to surface engineered carbon aerogels that demonstrate the tuneability of nanoporous solids for sustainable energy applications.

  8. Gromov Hyperbolicity of Riemann Surfaces

    Institute of Scientific and Technical Information of China (English)

    José M. RODR(I)GUEZ; Eva TOUR(I)S

    2007-01-01

    We study the hyperbolicity in the Gromov sense of Riemann surfaces. We deduce the hyperbolicity of a surface from the hyperbolicity of its "building block components". We also prove the equivalence between the hyperbolicity of a Riemann surface and the hyperbolicity of some graph associated with it. These results clarify how the decomposition of a Riemann surface into Y-pieces and funnels affects the hyperbolicity of the surface. The results simplify the topology of the surface and allow us to obtain global results from local information.

  9. SUPER HARD SURFACED POLYMERS

    Energy Technology Data Exchange (ETDEWEB)

    Mansur, Louis K [ORNL; Bhattacharya, R [UES, Incorporated, Dayton, OH; Blau, Peter Julian [ORNL; Clemons, Art [ORNL; Eberle, Cliff [ORNL; Evans, H B [UES, Incorporated, Dayton, OH; Janke, Christopher James [ORNL; Jolly, Brian C [ORNL; Lee, E H [Consultant, Milpitas, CA; Leonard, Keith J [ORNL; Trejo, Rosa M [ORNL; Rivard, John D [ORNL

    2010-01-01

    High energy ion beam surface treatments were applied to a selected group of polymers. Of the six materials in the present study, four were thermoplastics (polycarbonate, polyethylene, polyethylene terephthalate, and polystyrene) and two were thermosets (epoxy and polyimide). The particular epoxy evaluated in this work is one of the resins used in formulating fiber reinforced composites for military helicopter blades. Measures of mechanical properties of the near surface regions were obtained by nanoindentation hardness and pin on disk wear. Attempts were also made to measure erosion resistance by particle impact. All materials were hardness tested. Pristine materials were very soft, having values in the range of approximately 0.1 to 0.5 GPa. Ion beam treatment increased hardness by up to 50 times compared to untreated materials. For reference, all materials were hardened to values higher than those typical of stainless steels. Wear tests were carried out on three of the materials, PET, PI and epoxy. On the ion beam treated epoxy no wear could be detected, whereas the untreated material showed significant wear.

  10. Surface Active Components: Review

    Directory of Open Access Journals (Sweden)

    Z. Shafiei

    2014-03-01

    Full Text Available Biosurfactant or surface active components are produced by many different microorganisms. Biosurfactants are amphiphilic molecules with both hydrophilic and hydrophobic (generally hydrocarbon moieties that partition preferentially a within the interface between fluid phases with some other degrees of polarity and hydrogen bonding including oil/water or air/water interfaces. These properties render surfactants able to reducing surface and interfacial tension and forming microemulsion where hydrocarbons can solubilize in water or where water can solubilize in hydrocarbons, the majority of surfactants have gained importance in the fields of enhanced oil recovery, environmental bioremediation, food processing and pharmaceuticals. However, large-scale production of these molecules has not been realized as a result of low yields in production processes and high recovery and purification costs. This review article represents a classification of biosurfactant in addition to their microbial origin and effect of some nutrition and environmental factor for high production of biosurfactant. The nitrogen, carbon sources and environmental factors can make a difference key to the regulating biosurfactants synthesis Fascination with microbial surfactants have been steadily increasing recently because of advantages over the chemical surfactants for example environmentally friendly nature, lower toxicity, higher biodegradability, higher selectivity and specific gravity at extreme temperature, pH and salinity. For this reason the demand of biosurfactant are increasing day by day.

  11. Concepts in surface physics

    CERN Document Server

    Desjonquères, M -C

    1993-01-01

    This textbook is intended as an introduction to surface science for graduate students. It began as a course of lectures that we gave at the University of Paris (Orsay). Its main objectives are twofold: to provide the reader with a compre­ hensive presentation of the basic principles and concepts of surface physics and to show the usefulness of these concepts in the real world by referring to experiments. It starts at a rather elementary level since it only requires a knowledge of solid state physics, quantum mechanics, thermodynamics and statistical physics which does not exceed the background usually taught to students early in their university courses. However, since it finally reaches an advanced level, we have tried to render it as self-contained as possible so that it remains accessible even to an unexperienced reader. Furthermore, the emphasis has been put on a pedagogical level rather than on a technical level. In this spirit, whenever possible, models which are simplified, but which contain the featu...

  12. Earth's surface heat flux

    Directory of Open Access Journals (Sweden)

    J. H. Davies

    2009-11-01

    Full Text Available We present a revised estimate of Earth's surface heat flux that is based upon a heat flow data-set with 38 347 measurements, which is 55% more than used in previous estimates. Our methodology, like others, accounts for hydrothermal circulation in young oceanic crust by utilising a half-space cooling approximation. For the rest of Earth's surface, we estimate the average heat flow for different geologic domains as defined by global digital geology maps; and then produce the global estimate by multiplying it by the total global area of that geologic domain. The averaging is done on a polygon set which results from an intersection of a 1 degree equal area grid with the original geology polygons; this minimises the adverse influence of clustering. These operations and estimates are derived accurately using methodologies from Geographical Information Science. We consider the virtually un-sampled Antarctica separately and also make a small correction for hot-spots in young oceanic lithosphere. A range of analyses is presented. These, combined with statistical estimates of the error, provide a measure of robustness. Our final preferred estimate is 47±2 TW, which is greater than previous estimates.

  13. Smooth surfaces from bilinear patches: Discrete affine minimal surfaces

    KAUST Repository

    Käferböck, Florian

    2013-06-01

    Motivated by applications in freeform architecture, we study surfaces which are composed of smoothly joined bilinear patches. These surfaces turn out to be discrete versions of negatively curved affine minimal surfaces and share many properties with their classical smooth counterparts. We present computational design approaches and study special cases which should be interesting for the architectural application. 2013 Elsevier B.V.

  14. Relationship of wood surface energy to surface composition

    Science.gov (United States)

    Feipeng P. Liu; Timothy G. Rials; John Simonsen

    1998-01-01

    The wood cell wall is composed of cellulose, lignin, hemicelluloses, and extractives. Thus, the surface energy of the wood material must be some combination of the surface energies of these components. The influence of extractives on wood surface chemistry can be important in diverse industrial applications, such as coating, pulping, and wood-based composites. In this...

  15. Liquid droplet movement on horizontal surface with gradient surface energy

    Institute of Scientific and Technical Information of China (English)

    LIAO Qiang; WANG Hong; ZHU Xun; LI Mingwei

    2006-01-01

    A surface with gradient surface energy was fabricated on a silicon wafer by using the chemical vapor deposition (CVD) technology with the dodecyltrichlorosilane (C12H25Cl3Si) vapor which was adsorbed chemically on the surface of the silicon wafer to form a self-assemble monolayer (ASM) and thus a gradient profile of wettability. The microscopic contours of the gradient surface were measured with Seiko SPA400 atom force microscope (AFM). And the surface wettability profile was characterized by the sessile drop method, measuring the contact angle of fine water droplets that lay on the gradient surface, to represent the distribution of the surface energy on the surface. Using a high-speed video imaging system, the motion of water droplet on the horizontal gradient surface was visualized and the transient velocity was measured under ambient condition. The experimental results show that the liquid droplets can be driven to move from hydrophobic side to hydrophilic side on the horizontal gradient surface and the velocity of droplet can reach up to 40 mm/s. In addition, the motion of the water droplet can be generally divided into two stages: an acceleration stage and a deceleration stage. The droplet presents a squirming movement on the surface with a lower peak velocity and a larger extent of deceleration motion. And the static advancing contact angle of the droplet is obviously larger than the dynamic advancing contact angle on the gradient energy surface.

  16. Femtosecond laser-induced surface wettability modification of polystyrene surface

    Science.gov (United States)

    Wang, Bing; Wang, XinCai; Zheng, HongYu; Lam, YeeCheong

    2016-12-01

    In this paper, we demonstrated a simple method to create either a hydrophilic or hydrophobic surface. With femtosecond laser irradiation at different laser parameters, the water contact angle (WCA) on polystyrene's surface can be modified to either 12.7° or 156.2° from its original WCA of 88.2°. With properly spaced micro-pits created, the surface became hydrophilic probably due to the spread of the water droplets into the micro-pits. While with properly spaced micro-grooves created, the surface became rough and more hydrophobic. We investigated the effect of laser parameters on WCAs and analyzed the laser-treated surface roughness, profiles and chemical bonds by surface profilometer, scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS). For the laser-treated surface with low roughness, the polar (such as C—O, C=O, and O—C=O bonds) and non-polar (such as C—C or C—H bonds) groups were found to be responsible for the wettability changes. While for a rough surface, the surface roughness or the surface topography structure played a more significant role in the changes of the surface WCA. The mechanisms involved in the laser surface wettability modification process were discussed.

  17. Test surfaces useful for calibration of surface profilometers

    Science.gov (United States)

    Yashchuk, Valeriy V; McKinney, Wayne R; Takacs, Peter Z

    2013-12-31

    The present invention provides for test surfaces and methods for calibration of surface profilometers, including interferometric and atomic force microscopes. Calibration is performed using a specially designed test surface, or the Binary Pseudo-random (BPR) grating (array). Utilizing the BPR grating (array) to measure the power spectral density (PSD) spectrum, the profilometer is calibrated by determining the instrumental modulation transfer.

  18. Mars surface albedo and changes

    CERN Document Server

    Vincendon, Mathieu; Altieri, Francesca; Ody, Anouck

    2014-01-01

    The pervasive Mars dust is continually transported between surface and atmosphere. When on the surface, dust increases the albedo of darker underlying rocks and regolith, which modifies climate energy balance and must be quantified. Remote observation of surface albedo absolute value and albedo change is however complicated by dust itself when lifted in the atmosphere. Here we present a method to calculate and map the bolometric solar hemispherical albedo of the Martian surface using the 2004 - 2010 OMEGA imaging spectrometer dataset. This method takes into account aerosols radiative transfer, surface photometry, and instrumental issues such as registration differences between visible and near-IR detectors. Resulting albedos are on average 17% higher than previous estimates for bright surfaces while similar for dark surfaces. We observed that surface albedo changes occur mostly during the storm season due to isolated events. The main variations are observed during the 2007 global dust storm and during the fol...

  19. GEWEX Surface Radiation Budget (SRB)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NASA/GEWEX Surface Radiation Budget (SRB) Release-3.0 data sets contains global 3-hourly, daily, monthly/3-hourly, and monthly averages of surface and top-of...

  20. Thermochemical surface engineering of steels

    DEFF Research Database (Denmark)

    Thermochemical Surface Engineering of Steels provides a comprehensive scientific overview of the principles and different techniques involved in thermochemical surface engineering, including thermodynamics, kinetics principles, process technologies and techniques for enhanced performance of steels...

  1. The surface science of nanocrystals

    Science.gov (United States)

    Boles, Michael A.; Ling, Daishun; Hyeon, Taeghwan; Talapin, Dmitri V.

    2016-02-01

    All nanomaterials share a common feature of large surface-to-volume ratio, making their surfaces the dominant player in many physical and chemical processes. Surface ligands -- molecules that bind to the surface -- are an essential component of nanomaterial synthesis, processing and application. Understanding the structure and properties of nanoscale interfaces requires an intricate mix of concepts and techniques borrowed from surface science and coordination chemistry. Our Review elaborates these connections and discusses the bonding, electronic structure and chemical transformations at nanomaterial surfaces. We specifically focus on the role of surface ligands in tuning and rationally designing properties of functional nanomaterials. Given their importance for biomedical (imaging, diagnostics and therapeutics) and optoelectronic (light-emitting devices, transistors, solar cells) applications, we end with an assessment of application-targeted surface engineering.

  2. Integrated Surface Global Hourly Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Integrated Surface Data (ISD) is digital data set DSI-3505, archived at the National Climatic Data Center (NCDC). The ISD database is composed of worldwide surface...

  3. Computer representation of molecular surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Max, N.L.

    1981-07-06

    This review article surveys recent work on computer representation of molecular surfaces. Several different algorithms are discussed for producing vector or raster drawings of space-filling models formed as the union of spheres. Other smoother surfaces are also considered.

  4. Solvay Conference on Surface Science

    CERN Document Server

    1988-01-01

    The articles collected in this volume give a broad overview of the current state of surface science. Pioneers in the field and researchers met together at this Solvay Conference to discuss important new developments in surface science, with an emphasis on the common area between solid state physics and physical chemistry. The contributions deal with the following subjects: structure of surfaces, surface science and catalysis, two-dimensional physics and phase transitions, scanning tunneling microscopy, surface scattering and surface dynamics, chemical reactions at surfaces, solid-solid interfaces and superlattices, and surface studies with synchrotron radiation. On each of these subjects an introductory review talk and a number of short research contributions are followed by extensive discussions, which appear in full in the text. This nineteenth Solvay Conference commemorates the 75th anniversary of the Solvay Institutes.

  5. Surface normals and barycentric coordinates

    Directory of Open Access Journals (Sweden)

    Mullineux Glen

    1996-01-01

    Full Text Available The normal to a triangular parametric surface is investigated where the parameters used are barycentric coordinates. Formulae for the normal are obtained for non-rational and rational surfaces.

  6. Transgressive Surface as Sequence Boundary

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Analysis of the four cases of the sequence boundary (SB)-transgressive surface (TS) relation in nature shows that applying transgressive surfaces as sequence boundaries has the following merits: it improves the methodology of stratigraphic subdivision; the position of transgressive surface in a sea level curve is relatively fixed; the transgressive surface is a transforming surface of the stratal structure; in platforms or ramps, the transgressive surface is the only choice for determining the sequence boundary; the transgressive surface is a readily recognized physical surface reflected by seismic records in seismostratigraphy. The paper reaches a conclusion that to delineate a SB in terms of the TS is theoretically and practically better than to delineate it between highstand and lowstand sediments as has been done traditionally.

  7. Waveguiding with surface plasmon polaritons

    DEFF Research Database (Denmark)

    Han, Zhanghua; Bozhevolnyi, Sergey I.

    2014-01-01

    Surface plasmon polaritons (SPPs) are electromagnetic modes propagating along metal-dielectric interfaces. Various SPP modes can be supported by flat and curved, single and multiple surfaces, exhibiting remarkable properties, including the possibility of concentrating electromagnetic fields beyond...

  8. GODAE, SFCOBS - Surface Temperature Observations

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — GODAE, SFCOBS - Surface Temperature Observations: Ship, fixed/drifting buoy, and CMAN in-situ surface temperature. Global Telecommunication System (GTS) Data. The...

  9. Surfing wavy surfaces: Bacteria-surface interactions in flow

    Science.gov (United States)

    Miño, Gastón L.; Kantsler, Vasily; Stocker, Roman

    2014-11-01

    Complex processes occur when microbes interact with surfaces, from mixture enhancement and motion rectification to biofilm formation. Microbe-surface interactions frequently occur in flowing fluids, and flow has recently been shown to have itself unexpected consequences on the dynamics of motile microbes. Here we report on microfluidic experiments in which the interactions of Escherichia coli bacteria with wavy surfaces was quantified in the presence of fluid flow, a model system for naturally occurring topography of many real surfaces. We quantify surface interactions in terms of incident and scattering angles over a range of flow conditions, and compare results to the observations for a microchannel with straight walls.

  10. Surface plasmon polariton waveguiding in random surface nanostructures

    DEFF Research Database (Denmark)

    Bozhevolnyi, S. I.; Volkov, V. S.; Leosson, K.

    2003-01-01

    In this study, guiding of surface plasmon polaritons excited at a gold film surface along corrugation-free channels in regions that are covered with randomly located surface scatterers, is considered using near-field microscopy for imaging of surface plasmon polariton intensity distributions at t...... demonstrate well-defined surface plasmon polariton guiding along corrugation-free 2 micro-m wide channels in random structures and, in the wavelength range 738-774 nm, low-loss guiding around 20degrees bends having a bend radius of approx. 15 micro-m....

  11. Preperation for a Clean Surface

    Directory of Open Access Journals (Sweden)

    Aurimas Ralys

    2012-12-01

    Full Text Available The article reviews techniques for preparing clean surfaces used in the manufacturing process, considers the types of clean surfaces and their role in modern production and provides the classification methods of arranging such surfaces. The paper also discusses the principles of methods for solvent cleaning, aqueous cleaning, ultrasonic cleaning, precision cleaning and mechanical cleaning. The study focuses on the possibility of adjusting a clean surface using a water flow, including cavitation.Article in Lithuanian

  12. Preperation for a Clean Surface

    Directory of Open Access Journals (Sweden)

    Aurimas Ralys

    2013-02-01

    Full Text Available The article reviews techniques for preparing clean surfaces used in the manufacturing process, considers the types of clean surfaces and their role in modern production and provides the classification methods of arranging such surfaces. The paper also discusses the principles of methods for solvent cleaning, aqueous cleaning, ultrasonic cleaning, precision cleaning and mechanical cleaning. The study focuses on the possibility of adjusting a clean surface using a water flow, including cavitation.Article in Lithuanian

  13. Surface glycosylation of polymeric membranes

    Institute of Scientific and Technical Information of China (English)

    DAI ZhengWei; WAN LingShu; XU ZhiKang

    2008-01-01

    Surface glycosylation of polymeric membranes has been inspired by the structure of natural biomembranes. It refers to that glycosyl groups are introduced onto the membrane surface by various strategies, which combine the separation function of the membrane with the biological function of the saccharides in one system. In this review, progress in the surface glycosylation of polymeric membranes is highlighted in two aspects, i.e. the glycosylation methods and the potential applications of the surface-glycosylated membranes.

  14. Flow over riblet curved surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Loureiro, J B R; Freire, A P Silva, E-mail: atila@mecanica.ufrj.br [Mechanical Engineering Program, Federal University of Rio de Janeiro (COPPE/UFRJ), C.P. 68503, 21.941-972, Rio de Janeiro, RJ (Brazil)

    2011-12-22

    The present work studies the mechanics of turbulent drag reduction over curved surfaces by riblets. The effects of surface modification on flow separation over steep and smooth curved surfaces are investigated. Four types of two-dimensional surfaces are studied based on the morphometric parameters that describe the body of a blue whale. Local measurements of mean velocity and turbulence profiles are obtained through laser Doppler anemometry (LDA) and particle image velocimetry (PIV).

  15. Dropwise Condensation of Low Surface Tension Fluids on Omniphobic Surfaces

    Science.gov (United States)

    Rykaczewski, Konrad; Paxson, Adam T.; Staymates, Matthew; Walker, Marlon L.; Sun, Xiaoda; Anand, Sushant; Srinivasan, Siddarth; McKinley, Gareth H.; Chinn, Jeff; Scott, John Henry J.; Varanasi, Kripa K.

    2014-03-01

    Compared to the significant body of work devoted to surface engineering for promoting dropwise condensation heat transfer of steam, much less attention has been dedicated to fluids with lower interfacial tension. A vast array of low-surface tension fluids such as hydrocarbons, cryogens, and fluorinated refrigerants are used in a number of industrial applications, and the development of passive means for increasing their condensation heat transfer coefficients has potential for significant efficiency enhancements. Here we investigate condensation behavior of a variety of liquids with surface tensions in the range of 12 to 28 mN/m on three types of omniphobic surfaces: smooth oleophobic, re-entrant superomniphobic, and lubricant-impregnated surfaces. We demonstrate that although smooth oleophobic and lubricant-impregnated surfaces can promote dropwise condensation of the majority of these fluids, re-entrant omniphobic surfaces became flooded and reverted to filmwise condensation. We also demonstrate that on the lubricant-impregnated surfaces, the choice of lubricant and underlying surface texture play a crucial role in stabilizing the lubricant and reducing pinning of the condensate. With properly engineered surfaces to promote dropwise condensation of low-surface tension fluids, we demonstrate a four to eight-fold improvement in the heat transfer coefficient.

  16. Surfaces. [characterization of surface properties for predicting bond quality

    Science.gov (United States)

    Buckley, D. H.

    1983-01-01

    Techniques for the characterization of surface cleanliness and roughness for predicting the quality of an adhesive bond are outlined. Generally, smooth surfaces are only available from cleavage of crystalline materials along a natural cleavage plane. Films must be deposited on metal surfaces to achieve the same smoothness. Once the surfaces are clean, however, reaction with the ambient atmosphere becomes likely through diffusive and absorption processes, producing asperities. Electron diffraction, Auger electron, and X ray emission spectroscopy are used to characterize surface condition. Once the surface is observed to be clean, the application of an adhesive will usually prohibit separation along the adhesive; separation is then confined to the weaker of the two materials. Finally, the use of polytetrafluorothylene adhesive to test the adhesion between polymers and metal surfaces is described.

  17. Surface plasmon polariton waveguiding in random surface nanostructures

    DEFF Research Database (Denmark)

    Bozhevolnyi, S. I.; Volkov, V. S.; Leosson, K.

    2003-01-01

    In this study, guiding of surface plasmon polaritons excited at a gold film surface along corrugation-free channels in regions that are covered with randomly located surface scatterers, is considered using near-field microscopy for imaging of surface plasmon polariton intensity distributions...... at the surface. In the wavelength range 713-815 nm, we observed complete inhibition of the surface plasmon polariton propagation inside the random structures composed of individual (approx. 70 nm high) gold bumps (and their clusters) placed on a 55 nm thick gold film with a bump density of 75 micro-m-2. We...... demonstrate well-defined surface plasmon polariton guiding along corrugation-free 2 micro-m wide channels in random structures and, in the wavelength range 738-774 nm, low-loss guiding around 20degrees bends having a bend radius of approx. 15 micro-m....

  18. Plasma surface modification of polymers

    Science.gov (United States)

    Hirotsu, T.

    1980-01-01

    Thin plasma polymerization films are discussed from the viewpoint of simplicity in production stages. The application of selective, absorbent films and films used in selective permeability was tested. The types of surface modification of polymers discussed are: (1) plasma etching, (2) surface coating by plasma polymerized thin films, and (3) plasma activation surface graft polymerization.

  19. Surface Effects in Magnetic Nanoparticles

    CERN Document Server

    Fiorani, Dino

    2005-01-01

    This volume is a collection of articles on different approaches to the investigation of surface effects on nanosized magnetic materials, with special emphasis on magnetic nanoparticles. The book aims to provide an overview of progress in the understanding of surface properties and surface driven effects in magnetic nanoparticles through recent results of different modeling, simulation, and experimental investigations.

  20. Emerging trends in surface metrology

    DEFF Research Database (Denmark)

    Lonardo, P.M.; Lucca, D.A.; De Chiffre, Leonardo

    2002-01-01

    Recent advancements and some emerging trends in the methods and instruments used for surface and near surface characterisation are presented, considering the measurement of both topography and physical properties. In particular, surfaces that present difficulties in measurement or require new pro...

  1. Surface chemical modification of nanocrystals

    Energy Technology Data Exchange (ETDEWEB)

    Helms, Brett Anthony; Milliron, Delia Jane; Rosen, Evelyn Louise; Buonsanti, Raffaella; Llordes, Anna

    2017-03-14

    Nanocrystals comprising organic ligands at surfaces of the plurality of nanocrystals are provided. The organic ligands are removed from the surfaces of the nanocrystals using a solution comprising a trialkyloxonium salt in a polar aprotic solvent. The removal of the organic ligands causes the nanocrystals to become naked nanocrystals with cationic surfaces.

  2. Surface properties of HMX crystal

    Science.gov (United States)

    Yee, R. Y.; Adicoff, A.; Dibble, E. J.

    1980-01-01

    The surface properties of Beta-HMX crystals were studied. The surface energies of three principal crystal faces were obtained by measuring contact angles with several reference liquids. The surface energies and polarity of the three crystal faces are found to be different.

  3. Valuations on arithmetic surfaces

    Institute of Scientific and Technical Information of China (English)

    XU Ning

    2009-01-01

    In this paper,we give the definition of the height of a valuation and the definition of the big field Cp,G,where p is a prime and G R is an additive subgroup containing 1.We conclude that Cp,G is a field and Cp,G is algebraically closed.Based on this the author obtains the complete classification of valuations on arithmetic surfaces.Furthermore,for any m ≤ n ∈ Z,let Vm,n be an R-vector space of dimension n - m + 1,whose coordinates are indexed from rn to n.We generalize the definition of Cp,G,where p is a prime and G C Vm,n is an additive subgroup containing 1.We also conclude that Cp,G is a field if m ≤ 0 ≤ n.

  4. Valuations on arithmetic surfaces

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    In this paper, we give the definition of the height of a valuation and the definition of the big field Cp,G, where p is a prime and GR is an additive subgroup containing 1. We conclude that Cp,G is a field and Cp,G is algebraically closed. Based on this the author obtains the complete classification of valuations on arithmetic surfaces. Furthermore, for any m ≤n∈ Z, let Vm,n be an R-vector space of dimension n-m + 1, whose coordinates are indexed from m to n. We generalize the definition of Cp,G, where p is a prime and GVm,n is an additive subgroup containing 1. We also conclude that Cp,G is a field if m ≤0 ≤n.

  5. Bacterial surface adaptation

    Science.gov (United States)

    Utada, Andrew

    2014-03-01

    Biofilms are structured multi-cellular communities that are fundamental to the biology and ecology of bacteria. Parasitic bacterial biofilms can cause lethal infections and biofouling, but commensal bacterial biofilms, such as those found in the gut, can break down otherwise indigestible plant polysaccharides and allow us to enjoy vegetables. The first step in biofilm formation, adaptation to life on a surface, requires a working knowledge of low Reynolds number fluid physics, and the coordination of biochemical signaling, polysaccharide production, and molecular motility motors. These crucial early stages of biofilm formation are at present poorly understood. By adapting methods from soft matter physics, we dissect bacterial social behavior at the single cell level for several prototypical bacterial species, including Pseudomonas aeruginosa and Vibrio cholerae.

  6. Hydrological land surface modelling

    DEFF Research Database (Denmark)

    Ridler, Marc-Etienne Francois

    Recent advances in integrated hydrological and soil-vegetation-atmosphere transfer (SVAT) modelling have led to improved water resource management practices, greater crop production, and better flood forecasting systems. However, uncertainty is inherent in all numerical models ultimately leading...... and disaster management. The objective of this study is to develop and investigate methods to reduce hydrological model uncertainty by using supplementary data sources. The data is used either for model calibration or for model updating using data assimilation. Satellite estimates of soil moisture and surface...... hydrological and tested by assimilating synthetic hydraulic head observations in a catchment in Denmark. Assimilation led to a substantial reduction of model prediction error, and better model forecasts. Also, a new assimilation scheme is developed to downscale and bias-correct coarse satellite derived soil...

  7. Surface enhanced thermo lithography

    KAUST Repository

    Coluccio, Maria Laura

    2017-01-13

    We used electroless deposition to fabricate clusters of silver nanoparticles (NPs) on a silicon substrate. These clusters are plasmonics devices that induce giant electromagnetic (EM) field increments. When those EM field are absorbed by the metal NPs clusters generate, in turn, severe temperature increases. Here, we used the laser radiation of a conventional Raman set-up to transfer geometrical patterns from a template of metal NPs clusters into a layer of thermo sensitive Polyphthalaldehyde (PPA) polymer. Temperature profile on the devices depends on specific arrangements of silver nanoparticles. In plane temperature variations may be controlled with (i) high nano-meter spatial precision and (ii) single Kelvin temperature resolution on varying the shape, size and spacing of metal nanostructures. This scheme can be used to generate strongly localized heat amplifications for applications in nanotechnology, surface enhanced thermo-lithography (SETL), biology and medicine (for space resolved cell ablation and treatment), nano-chemistry.

  8. Surface Temperature Data Analysis

    Science.gov (United States)

    Hansen, James; Ruedy, Reto

    2012-01-01

    Small global mean temperature changes may have significant to disastrous consequences for the Earth's climate if they persist for an extended period. Obtaining global means from local weather reports is hampered by the uneven spatial distribution of the reliably reporting weather stations. Methods had to be developed that minimize as far as possible the impact of that situation. This software is a method of combining temperature data of individual stations to obtain a global mean trend, overcoming/estimating the uncertainty introduced by the spatial and temporal gaps in the available data. Useful estimates were obtained by the introduction of a special grid, subdividing the Earth's surface into 8,000 equal-area boxes, using the existing data to create virtual stations at the center of each of these boxes, and combining temperature anomalies (after assessing the radius of high correlation) rather than temperatures.

  9. Laser surface texturing of tool steel: textured surfaces quality evaluation

    Science.gov (United States)

    Šugár, Peter; Šugárová, Jana; Frnčík, Martin

    2016-05-01

    In this experimental investigation the laser surface texturing of tool steel of type 90MnCrV8 has been conducted. The 5-axis highly dynamic laser precision machining centre Lasertec 80 Shape equipped with the nano-second pulsed ytterbium fibre laser and CNC system Siemens 840 D was used. The planar and spherical surfaces first prepared by turning have been textured. The regular array of spherical and ellipsoidal dimples with a different dimensions and different surface density has been created. Laser surface texturing has been realized under different combinations of process parameters: pulse frequency, pulse energy and laser beam scanning speed. The morphological characterization of ablated surfaces has been performed using scanning electron microscopy (SEM) technique. The results show limited possibility of ns pulse fibre laser application to generate different surface structures for tribological modification of metallic materials. These structures were obtained by varying the processing conditions between surface ablation, to surface remelting. In all cases the areas of molten material and re-cast layers were observed on the bottom and walls of the dimples. Beside the influence of laser beam parameters on the machined surface quality during laser machining of regular hemispherical and elipsoidal dimple texture on parabolic and hemispherical surfaces has been studied.

  10. Surface-wave photonic quasicrystal

    CERN Document Server

    Gao, Zhen; Zhang, Youming; Xu, Hongyi; Zhang, Baile

    2016-01-01

    In developing strategies of manipulating surface electromagnetic waves, it has been recently recognized that a complete forbidden band gap can exist in a periodic surface-wave photonic crystal, which has subsequently produced various surface-wave photonic devices. However, it is not obvious whether such a concept can be extended to a non-periodic surface-wave system that lacks translational symmetry. Here we experimentally demonstrate that a surface-wave photonic quasicrystal that lacks periodicity can also exhibit a forbidden band gap for surface electromagnetic waves. The lower cutoff of this forbidden band gap is mainly determined by the maximum separation between nearest neighboring pillars. Point defects within this band gap show distinct properties compared to a periodic photonic crystal for the absence of translational symmetry. A line-defect waveguide, which is crafted out of this surface-wave photonic quasicrystal by shortening a random row of metallic rods, is also demonstrated to guide and bend sur...

  11. Helium atom scattering from surfaces

    CERN Document Server

    1992-01-01

    High resolution helium atom scattering can be applied to study a number of interesting properties of solid surfaces with great sensitivity and accuracy. This book treats in detail experimental and theoretical aspects ofthis method as well as all current applications in surface science. The individual chapters - all written by experts in the field - are devoted to the investigation of surface structure, defect shapes and concentrations, the interaction potential, collective and localized surface vibrations at low energies, phase transitions and surface diffusion. Over the past decade helium atom scattering has gained widespread recognitionwithin the surface science community. Points in its favour are comprehensiveunderstanding of the scattering theory and the availability of well-tested approximation to the rigorous theory. This book will be invaluable to surface scientists wishing to make an informed judgement on the actual and potential capabilities of this technique and its results.

  12. Beauville Surfaces and Groups 2012

    CERN Document Server

    Garion, Shelly; Vdovina, Alina; Springer Proceedings in Mathematics & Statistics : Volume 123

    2015-01-01

    This collection of surveys and research articles explores a fascinating class of varieties: Beauville surfaces. It is the first time that these objects are discussed from the points of view of algebraic geometry as well as group theory. The book also includes various open problems and conjectures related to these surfaces. Beauville surfaces are a class of rigid regular surfaces of general type, which can be described in a purely algebraic combinatoric way. They play an important role in different fields of mathematics like algebraic geometry, group theory and number theory. The notion of Beauville surface was introduced by Fabrizio Catanese in 2000 and, after the first systematic study of these surfaces by Ingrid Bauer, Fabrizio Catanese and Fritz Grunewald, there has been an increasing interest in the subject. These proceedings reflect the topics of the lectures presented during the workshop ‘Beauville Surfaces and Groups 2012’, held at Newcastle University, UK in June 2012. This conference brought toge...

  13. Drop impact on superheated surfaces

    CERN Document Server

    Tran, Tuan; Prosperetti, Andrea; Sun, Chao; Lohse, Detlef

    2011-01-01

    At impact of a liquid droplet on a smooth surface heated above the liquid's boiling point, the droplet either immediately boils when it contacts the surfaces (``contact boiling''), or without any surface contact forms a Leidenfrost vapor layer towards the hot surface and bounces back (``gentle film boiling''), or both forms the Leidenfrost layer and ejects tiny droplets upward (``spraying film boiling''). We experimentally determine conditions under which impact behaviors in each regime can be realized. We show that the dimensionless maximum spreading $\\gamma$ of impacting droplets on the heated surfaces in both gentle and spraying film boiling regimes shows a universal scaling with the Weber number $\\We$ ($\\gamma\\sim\\We^{2/5}$) -- regardless of surface temperature and of liquid properties -- which is much steeper than for the impact on non-heated (hydrophilic or hydrophobic) surfaces ($\\gamma\\sim\\We^{1/4}$). We also intereferometrically measure the vapor thickness under the droplet.

  14. Anti-fouling bioactive surfaces.

    Science.gov (United States)

    Yu, Qian; Zhang, Yanxia; Wang, Hongwei; Brash, John; Chen, Hong

    2011-04-01

    Bioactive surfaces refer to surfaces with immobilized bioactive molecules aimed specifically at promoting or supporting particular interactions. Such surfaces are of great importance for various biomedical and biomaterials applications. In the past few years, considerable effort has been made to create bioactive surfaces by forming specific biomolecule-modified surfaces on a non-biofouling "base" or "background". Hydrophilic and bioinert polymers have been widely used as anti-fouling layers that resist non-specific protein interactions. They can also serve as "spacers" to effectively move the immobilized biomolecule away from the surface, thus enhancing its bioactivity. In this review we summarize several successful approaches for the design and preparation of bioactive surfaces based on different types of anti-fouling/spacer materials. Some perspectives on future research in this area are also presented.

  15. Approximation of Surfaces by Cylinders

    DEFF Research Database (Denmark)

    Randrup, Thomas

    1998-01-01

    We present a new method for approximation of a given surface by a cylinder surface. It is a constructive geometric method, leading to a monorail representation of the cylinder surface. By use of a weighted Gaussian image of the given surface, we determine a projection plane. In the orthogonal...... projection of the surface onto this plane, a reference curve is determined by use of methods for thinning of binary images. Finally, the cylinder surface is constructed as follows: the directrix of the cylinder surface is determined by a least squares method minimizing the distance to the points...... in the projection within a tolerance given by the reference curve, and the rulings are lines perpendicular to the projection plane. Application of the method in ship design is given....

  16. Surface-induced evaporative cooling

    Institute of Scientific and Technical Information of China (English)

    Ke Min; Yan Bo; Cheng Feng; Wang Yu-Zhu

    2009-01-01

    The effects of surface-induced evaporative cooling on an atom chip are investigated. The evolutions of temperature, number and phase-space density of the atom cloud are measured when the atom cloud is brought close to the surface. Rapid decrease of the temperature and number of the atoms is found when the atom-surface distance is < 100 μm. A gain of about a factor of five on the phase-space density is obtained. It is found that the efficiency of the surface-induced evaporative cooling depends on the atom-surface distance and the shape of the evaporative trap. When the atoms are moved very close to the surface, severe heating is observed, which dominates when the holding time is > 8 ms. It is important that the surface-induced evaporative cooling offers novel possibilities for the realization of a continuous condensation, where a spatially varying evaporative cooling is required.

  17. Mars Surface Simulations

    Science.gov (United States)

    Nørnberg, Per; Merrison, Jonathan P.; Gunnlaugsson, Haraldur P.

    2010-05-01

    Laboratory simulations of the Martian surface are of importance to broaden scientific understanding of the physical processes, but also in order to develop the technology necessary for exploration of the planet. The Mars Simulation Laboratory at Aarhus University [1] has been involved in such simulations for around ten years and has developed several experimental facilities for carrying out science or instrument testing under conditions similar to those at the Martian surface, specifically low pressure, low temperature and importantly recreating the wind flow environment and dust suspension (reproducing the Martian dusty aerosol) using Mars analogue material [2]. The science involved in this simulation work has covered a broad spectrum including, erosion induced mineralogy/chemistry, particulate electrification, magnetic properties of Martian dust, biological survival, UV induced chemistry/mineralogy (using a solar simulator), adhesion/cohesion processes and the wind driven transport of dust and sand [3,4]. With regard to technology the wind tunnel facilities have been used in the development of the latest wind and dust sensing instrumentation [5,6]. With support from the European Space Agency (ESA) and Danish national funding an advanced Mars simulation facility has recently been constructed (2009). This wind tunnel facility has a cross section of 2 x 1 m and a length of 8 m, a temperature range down to below -120C, wind speeds in excess of 20m/s, and automated dust control. With a range of (specialised) sensing instrumentation it provides the opportunity to perform a new generation of scientific experiments and allow testing and technology development in the most realistic and rigorous environment. As well as being available for the space agencies, this facility will be open to all potential scientific collaborators. Also European planetary scientists may benefit from support through the EU Europlanet FP7 networking programme. For more information on access

  18. The Relationship between Focal Surfaces and Surfaces at a Constant Distance from the Edge of Regression on a Surface

    OpenAIRE

    Semra Yurttancikmaz; Omer Tarakci

    2015-01-01

    We investigate the relationship between focal surfaces and surfaces at a constant distance from the edge of regression on a surface. We show that focal surfaces F1 and F2 of the surface M can be obtained by means of some special surfaces at a constant distance from the edge of regression on the surface M.

  19. Wetting failure of hydrophilic surfaces promoted by surface roughness

    Science.gov (United States)

    Zhao, Meng-Hua; Chen, Xiao-Peng; Wang, Qing

    2014-06-01

    Wetting failure is of vital importance to many physical phenomena, such as industrial coating and drop emission. Here we show when and how the surface roughness promotes the destabilization of a moving contact line on a hydrophilic surface. Beyond the balance of the driving force and viscous resistance where a stable wetting interface is sustained, wetting failure occurs and is modified by the roughness of the surface. The promoting effect arises only when the wetting velocity is high enough to create a gas-liquid-solid composite interface in the vicinity of the moving contact line, and it is a function of the intrinsic contact angle and proportion of solid tops. We propose a model to explain splashes of rough solid spheres impacting into liquids. It reveals a novel concept that dynamic wetting on hydrophilic rough surfaces can be similar to that on hydrophobic surfaces, and brings a new way to design surfaces with specific wetting properties.

  20. Surface phononic graphene

    Science.gov (United States)

    Yu, Si-Yuan; Sun, Xiao-Chen; Ni, Xu; Wang, Qing; Yan, Xue-Jun; He, Cheng; Liu, Xiao-Ping; Feng, Liang; Lu, Ming-Hui; Chen, Yan-Feng

    2016-12-01

    Strategic manipulation of wave and particle transport in various media is the key driving force for modern information processing and communication. In a strongly scattering medium, waves and particles exhibit versatile transport characteristics such as localization, tunnelling with exponential decay, ballistic, and diffusion behaviours due to dynamical multiple scattering from strong scatters or impurities. Recent investigations of graphene have offered a unique approach, from a quantum point of view, to design the dispersion of electrons on demand, enabling relativistic massless Dirac quasiparticles, and thus inducing low-loss transport either ballistically or diffusively. Here, we report an experimental demonstration of an artificial phononic graphene tailored for surface phonons on a LiNbO3 integrated platform. The system exhibits Dirac quasiparticle-like transport, that is, pseudo-diffusion at the Dirac point, which gives rise to a thickness-independent temporal beating for transmitted pulses, an analogue of Zitterbewegung effects. The demonstrated fully integrated artificial phononic graphene platform here constitutes a step towards on-chip quantum simulators of graphene and unique monolithic electro-acoustic integrated circuits.

  1. Surface acoustic wave microfluidics.

    Science.gov (United States)

    Ding, Xiaoyun; Li, Peng; Lin, Sz-Chin Steven; Stratton, Zackary S; Nama, Nitesh; Guo, Feng; Slotcavage, Daniel; Mao, Xiaole; Shi, Jinjie; Costanzo, Francesco; Huang, Tony Jun

    2013-09-21

    The recent introduction of surface acoustic wave (SAW) technology onto lab-on-a-chip platforms has opened a new frontier in microfluidics. The advantages provided by such SAW microfluidics are numerous: simple fabrication, high biocompatibility, fast fluid actuation, versatility, compact and inexpensive devices and accessories, contact-free particle manipulation, and compatibility with other microfluidic components. We believe that these advantages enable SAW microfluidics to play a significant role in a variety of applications in biology, chemistry, engineering and medicine. In this review article, we discuss the theory underpinning SAWs and their interactions with particles and the contacting fluids in which they are suspended. We then review the SAW-enabled microfluidic devices demonstrated to date, starting with devices that accomplish fluid mixing and transport through the use of travelling SAW; we follow that by reviewing the more recent innovations achieved with standing SAW that enable such actions as particle/cell focusing, sorting and patterning. Finally, we look forward and appraise where the discipline of SAW microfluidics could go next.

  2. Surface Modification of Intraocular Lenses

    Directory of Open Access Journals (Sweden)

    Qi Huang

    2016-01-01

    Full Text Available Objective: This paper aimed to review the current literature on the surface modification of intraocular lenses (IOLs. Data Sources: All articles about surface modification of IOLs published up to 2015 were identified through a literature search on both PubMed and ScienceDirect. Study Selection: The articles on the surface modification of IOLs were included, but those on design modification and surface coating were excluded. Results: Technology of surface modification included plasma, ion beam, layer-by-layer self-assembly, ultraviolet radiation, and ozone. The main molecules introduced into IOLs surface were poly (ethylene glycol, polyhedral oligomeric silsesquioxane, 2-methacryloyloxyethyl phosphorylcholine, TiO 2 , heparin, F-heparin, titanium, titanium nitride, vinyl pyrrolidone, and inhibitors of cytokines. The surface modification either resulted in a more hydrophobic lens, a more hydrophilic lens, or a lens with a hydrophilic anterior and hydrophobic posterior surface. Advances in research regarding surface modification of IOLs had led to a better biocompatibility in both in vitro and animal experiments. Conclusion: The surface modification is an efficient, convenient, economic and promising method to improve the biocompatibility of IOLs.

  3. Adhesion behaviors on superhydrophobic surfaces.

    Science.gov (United States)

    Zhu, Huan; Guo, Zhiguang; Liu, Weimin

    2014-04-18

    The adhesion behaviors of superhydrophobic surfaces have become an emerging topic to researchers in various fields as a vital step in the interactions between materials and organisms/materials. Controlling the chemical compositions and topological structures via various methods or technologies is essential to fabricate and modulate different adhesion properties, such as low-adhesion, high-adhesion and anisotropic adhesion on superhydrophobic surfaces. We summarize the recent developments in both natural superhydrophobic surfaces and artificial superhydrophobic surfaces with various adhesions and also pay attention to superhydrophobic surfaces switching between low- and high-adhesion. The methods to regulate or translate the adhesion of superhydrophobic surfaces can be considered from two perspectives. One is to control the chemical composition and change the surface geometric structure on the surfaces, respectively or simultaneously. The other is to provide external stimulations to induce transitions, which is the most common method for obtaining switchable adhesions. Additionally, adhesion behaviors on solid-solid interfaces, such as the behaviors of cells, bacteria, biomolecules and icing on superhydrophobic surfaces are also noticeable and controversial. This review is aimed at giving a brief and crucial overview of adhesion behaviors on superhydrophobic surfaces.

  4. Fabrication of tunable superhydrophobic surfaces

    Science.gov (United States)

    Shiu, Jau-Ye; Kuo, Chun-Wen; Chen, Peilin

    2004-02-01

    Inspired by the water-repellent behavior of the micro- and nano-structured plant surfaces, superhydrophobic materials, with a water contact larger than 150 degree, have received a lot of research attentions recently. It has been suggested that contamination, oxidation and current conduction can be inhibited on such superhydrophobic surfaces, and the flow resistance in the microfluidic channels can also be reduced using super water-repellent materials. In order to prepare superhydrophobic materials, we have developed two simple approaches for fabricating tunable superhydrophobic surfaces using nanosphere lithography and plasma etching. In the first case, the polystyrene nanospheres were employed to create well-ordered rough surfaces covered by gold and alkylthiols. Using oxygen plasma treatment, the topmost surface area can be modified systematically, as the result the water contact angle on such surfaces can be tuned from 132 to 170 degree. The water contact angles measured on these surfaces can be modeled by the Cassie"s formulation without any adjustable parameter. In the second approach, thin films of Teflon were spin-coated on the substrate surfaces and treated by oxygen plasma. Superhydrophobic surfaces with water contact angle up to 170 degree were obtained by this approach. If the ITO glasses were used as the substrates, the hydrophobicity of the surface can be tuned by applying DC voltage. Water contact angle can be adjusted from 158 degree to 38 degree.

  5. Adhesion energy, surface traction and surface tension in liquid xenon

    Indian Academy of Sciences (India)

    B Mathew; G A Adebayo

    2011-12-01

    We calculated the adhesion energy, the surface traction and the surface energy of liquid xenon using molecular dynamics (MD) simulation. The value of the adhesion energy for liquid xenon at a reduced density of 0.630 was found to be 0.591 J/m2 and the surface traction has a peak at = 3.32 Å. It was observed that the attraction of the molecules in the liquid surface which produces a resistance to penetration decreases with temperature. This may be attributed to the greater average separation of molecules at higher temperature.

  6. Slowing Down Surface Plasmons on a Moiré Surface

    Science.gov (United States)

    Kocabas, Askin; Senlik, S. Seckin; Aydinli, Atilla

    2009-02-01

    We have demonstrated slow propagation of surface plasmons on metallic Moiré surfaces. The phase shift at the node of the Moiré surface localizes the propagating surface plasmons and adjacent nodes form weakly coupled plasmonic cavities. Group velocities around vg=0.44c at the center of the coupled cavity band and almost a zero group velocity at the band edges are observed. A tight binding model is used to understand the coupling behavior. Furthermore, the sinusoidally modified amplitude about the node suppresses the radiation losses and reveals a relatively high quality factor (Q=103).

  7. Tunable Superomniphobic Surfaces for Sorting Droplets by Surface Tension

    Science.gov (United States)

    Movafaghi, Sanli; Wang, Wei; Metzger, Ari; Williams, Desiree; Williams, John; Kota, Arun

    2016-11-01

    Manipulation of liquid droplets on super-repellent surfaces (i.e., surfaces that are extremely repellent to liquids) has been widely studied because droplets exhibit high mobility on these surfaces due to the ultra-low adhesion, which leads to minimal sample loss and contamination. Although droplet manipulation has been demonstrated using electric fields, magnetic fields, guiding tracks and wettability gradients, to the best of our knowledge, there are no reports of droplet manipulation methods that can sort droplets by surface tension on super-repellent surfaces. In this work, we utilized tunable superomniphobic surfaces (i.e., surfaces that are extremely repellent to virtually all liquids) to develop a simple device with precisely tailored solid surface energy domains that, for the first time, can sort droplets by surface tension. Droplet sorting occurs on our device entirely due to a balance between the work done by gravity and the work expended due to adhesion, without the need for any external energy input. Our device can be fabricated easily in a short time and is particularly useful for in-the-field and on-the-go operations, where complex analysis equipment is unavailable. We envision that our methodology for droplet sorting will enable inexpensive and energy-efficient analytical devices for personalized point-of-care diagnostic platforms and lab-on-a-chip systems.

  8. Role of surface temperature in fluorocarbon plasma-surface interactions

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, Caleb T.; Overzet, Lawrence J.; Goeckner, Matthew J. [Department of Electrical Engineering, University of Texas at Dallas, PO Box 830688, Richardson, TX 75083 (United States)

    2012-07-15

    This article examines plasma-surface reaction channels and the effect of surface temperature on the magnitude of those channels. Neutral species CF{sub 4}, C{sub 2}F{sub 6}, and C{sub 3}F{sub 8} are produced on surfaces. The magnitude of the production channel increases with surface temperature for all species, but favors higher mass species as the temperature is elevated. Additionally, the production rate of CF{sub 2} increases by a factor of 5 as the surface temperature is raised from 25 Degree-Sign C to 200 Degree-Sign C. Fluorine density, on the other hand, does not change as a function of either surface temperature or position outside of the plasma glow. This indicates that fluorine addition in the gas-phase is not a dominant reaction. Heating reactors can result in higher densities of depositing radical species, resulting in increased deposition rates on cooled substrates. Finally, the sticking probability of the depositing free radical species does not change as a function of surface temperature. Instead, the surface temperature acts together with an etchant species (possibly fluorine) to elevate desorption rates on that surface at temperatures lower than those required for unassisted thermal desorption.

  9. Surface Energy and Setting Process of Contacting Surfaces

    Directory of Open Access Journals (Sweden)

    M. V. Musokhranov

    2014-01-01

    Full Text Available The paper deals with a challenge in terms of ensuring an accuracy of the relative position of the conjugated surfaces that is to determine a coefficient of friction. To solve it, there is a proposal to use the surface energy, as a tool that influences the contacting parts nature. Presently, energy of the surface layers at best is only stated, but not used in practice.Analysis of the conditions of interaction between two contacting surfaces, such as seizing and setting cannot be explained only from the position of the roughness parameters. It is found that these phenomena are explained by the appearing gripe (setting bridges, which result from the energy of interaction between two or more adjacent surfaces. The emerging phenomenon such as micro welding, i.e. occurring bonds, is caused by the overflow of energy, according to the theory of physics, from the surface with a high level of energy to the surface with the smaller one to balance the system as a whole.The paper shows that through the use of process, controlling the depth of the surface layer and creating a certain structure, the energy level of the material as a whole can be specified. And this will allow us to provide the necessary performance and mechanical properties. It means to create as many gripe bridges as possible to ensure continuous positioning i.e. a fixed connection of the contacting surfaces.It was determined that to increase a value of the friction coefficient, the physical and mechanical properties of the surface layer of the parts material must be taken into account, namely, in the part body accumulate the energy to be consumed for forming the surface.The paper gives recommendations for including the parts of the surface energy in the qualitative indicators of characteristics. This will make a technologist, when routing a process, to choose such operations and modes to provide the designer-specified parameters not only of the accuracy and surface finish, but also of the

  10. Urban aerosol effects on surface insolation and surface temperature

    Science.gov (United States)

    Jin, M.; Burian, S. J.; Remer, L. A.; Shepherd, M. J.

    2007-12-01

    Urban aerosol particulates may play a fundamental role in urban microclimates and city-generated mesoscale circulations via its effects on energy balance of the surface. Key questions that need to be addressed include: (1) How do these particles affect the amount of solar energy reaching the surface and resulting surface temperature? (2) Is the effect the same in all cities? and (3) How does it vary from city to city? Using NASA AERONET in-situ observations, a radiative transfer model, and a regional climate mode (MM5), we assess aerosol effects on surface insolation and surf ace temperature for dense urban-polluted regions. Two big cities, one in a developing country (Beijing, P.R. China) and another in developed country (New York City, USA), are selected for inter-comparison. The study reveals that aerosol effects on surface temperature depends largely on aerosols' optical and chemical properties as well as atmosphere and land surface conditions, such as humidity and land cover. Therefore, the actual magnitudes of aerosol effects differ from city to city. Aerosol measurements from AERONET show both average and extreme cases for aerosol impacts on surface insolation. In general, aerosols reduce surface insolation by 30Wm-2. Nevertheless, in extreme cases, such reduction can exceed 100 Wm-2. Consequently, this reduces surface skin temperature 2-10C in an urban environment.

  11. Simulation of surface processes.

    Science.gov (United States)

    Jónsson, Hannes

    2011-01-18

    Computer simulations of surface processes can reveal unexpected insight regarding atomic-scale structure and transitions. Here, the strengths and weaknesses of some commonly used approaches are reviewed as well as promising avenues for improvements. The electronic degrees of freedom are usually described by gradient-dependent functionals within Kohn-Sham density functional theory. Although this level of theory has been remarkably successful in numerous studies, several important problems require a more accurate theoretical description. It is important to develop new tools to make it possible to study, for example, localized defect states and band gaps in large and complex systems. Preliminary results presented here show that orbital density-dependent functionals provide a promising avenue, but they require the development of new numerical methods and substantial changes to codes designed for Kohn-Sham density functional theory. The nuclear degrees of freedom can, in most cases, be described by the classical equations of motion; however, they still pose a significant challenge, because the time scale of interesting transitions, which typically involve substantial free energy barriers, is much longer than the time scale of vibrations--often 10 orders of magnitude. Therefore, simulation of diffusion, structural annealing, and chemical reactions cannot be achieved with direct simulation of the classical dynamics. Alternative approaches are needed. One such approach is transition state theory as implemented in the adaptive kinetic Monte Carlo algorithm, which, thus far, has relied on the harmonic approximation but could be extended and made applicable to systems with rougher energy landscape and transitions through quantum mechanical tunneling.

  12. Hermite variational implicit surface reconstruction

    Institute of Scientific and Technical Information of China (English)

    PAN RongJiang; MENG XiangXu; WHANGBO TaegKeun

    2009-01-01

    We propose a new technique for reconstructing surfaces from a large set of unorganized 3D data points and their associated normal vectors. The surface is represented as the zero level set of an implicit vol-ume model which fits the data points and normal constraints. Compared with variational implicit sur-faces, we make use of surface normal vectors at data points directly in the implicit model and avoid of introducing manufactured off-surface points. Given n surface point/normal pairs, the proposed method only needs to solve an n×n positive definite linear system. It allows fitting large datasets effectively and robustly. We demonstrate the performance of the proposed method with both globally supported and compactly supported radial basis functions on several datasets.

  13. Friction surfaced Stellite6 coatings

    Energy Technology Data Exchange (ETDEWEB)

    Rao, K. Prasad; Damodaram, R. [Department of Metallurgical and Materials Engineering - Indian Institute of Technology Madras, Chennai 600 036 (India); Rafi, H. Khalid, E-mail: khalidrafi@gmail.com [Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras, Chennai 600 036 (India); Ram, G.D. Janaki [Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras, Chennai 600 036 (India); Reddy, G. Madhusudhan [Metal Joining Group, Defence Metallurgical Research Laboratory (DMRL) Kanchanbagh, Hyderabad 500 058 (India); Nagalakshmi, R. [Welding Research Institute, Bharat Heavy Electricals Limited, Tiruchirappalli 620 014 (India)

    2012-08-15

    Solid state Stellite6 coatings were deposited on steel substrate by friction surfacing and compared with Stellite6 cast rod and coatings deposited by gas tungsten arc and plasma transferred arc welding processes. Friction surfaced coatings exhibited finer and uniformly distributed carbides and were characterized by the absence of solidification structure and compositional homogeneity compared to cast rod, gas tungsten arc and plasma transferred coatings. Friction surfaced coating showed relatively higher hardness. X-ray diffraction of samples showed only face centered cubic Co peaks while cold worked coating showed hexagonally close packed Co also. - Highlights: Black-Right-Pointing-Pointer Stellite6 used as coating material for friction surfacing. Black-Right-Pointing-Pointer Friction surfaced (FS) coatings compared with casting, GTA and PTA processes. Black-Right-Pointing-Pointer Finer and uniformly distributed carbides in friction surfaced coatings. Black-Right-Pointing-Pointer Absence of melting results compositional homogeneity in FS Stellite6 coatings.

  14. Surface energies of elemental crystals

    Science.gov (United States)

    Tran, Richard; Xu, Zihan; Radhakrishnan, Balachandran; Winston, Donald; Sun, Wenhao; Persson, Kristin A.; Ong, Shyue Ping

    2016-09-01

    The surface energy is a fundamental property of the different facets of a crystal that is crucial to the understanding of various phenomena like surface segregation, roughening, catalytic activity, and the crystal’s equilibrium shape. Such surface phenomena are especially important at the nanoscale, where the large surface area to volume ratios lead to properties that are significantly different from the bulk. In this work, we present the largest database of calculated surface energies for elemental crystals to date. This database contains the surface energies of more than 100 polymorphs of about 70 elements, up to a maximum Miller index of two and three for non-cubic and cubic crystals, respectively. Well-known reconstruction schemes are also accounted for. The database is systematically improvable and has been rigorously validated against previous experimental and computational data where available. We will describe the methodology used in constructing the database, and how it can be accessed for further studies and design of materials.

  15. Drop impact on superheated surfaces.

    Science.gov (United States)

    Tran, Tuan; Staat, Hendrik J J; Prosperetti, Andrea; Sun, Chao; Lohse, Detlef

    2012-01-20

    At the impact of a liquid droplet on a smooth surface heated above the liquid's boiling point, the droplet either immediately boils when it contacts the surface ("contact boiling"), or without any surface contact forms a Leidenfrost vapor layer towards the hot surface and bounces back ("gentle film boiling"), or both forms the Leidenfrost layer and ejects tiny droplets upward ("spraying film boiling"). We experimentally determine conditions under which impact behaviors in each regime can be realized. We show that the dimensionless maximum spreading γ of impacting droplets on the heated surfaces in both gentle and spraying film boiling regimes shows a universal scaling with the Weber number We (γ~We(2/5)), which is much steeper than for the impact on nonheated (hydrophilic or hydrophobic) surfaces (γ~We(1/4)). We also interferometrically measure the vapor thickness under the droplet.

  16. Surface micropattern limits bacterial contamination

    OpenAIRE

    Mann, Ethan E.; Manna, Dipankar; Mettetal, Michael R; May, Rhea M.; Dannemiller, Elisa M; Chung, Kenneth K.; Brennan, Anthony B; Reddy, Shravanthi T

    2014-01-01

    Background Bacterial surface contamination contributes to transmission of nosocomial infections. Chemical cleansers used to control surface contamination are often toxic and incorrectly implemented. Additional non-toxic strategies should be combined with regular cleanings to mitigate risks of human error and further decrease rates of nosocomial infections. The Sharklet micropattern (MP), inspired by shark skin, is an effective tool for reducing bacterial load on surfaces without toxic additiv...

  17. Surface events in HPGe detectors

    Energy Technology Data Exchange (ETDEWEB)

    Abt, Iris; Dinter, Sabine; Faulstich, Florian; Majorovits, Bela; Stelzer, Franz [Max-Planck-Institut fuer Physik, Munich (Germany)

    2011-07-01

    Events on or close to the surface of high purity germanium, HPGe, detectors can introduce backgrounds in low background applications of such devices. The Galatea test-stand, especially developed and constructed at the MPI fuer Physik allows an almost full surface scan of a detector with alpha and beta sources. Events induced by alpha and beta particles can be characterized and surface effects can be studied. First comparisons between data and Monte Carlo are presented.

  18. Wettability of natural superhydrophobic surfaces.

    Science.gov (United States)

    Webb, Hayden K; Crawford, Russell J; Ivanova, Elena P

    2014-08-01

    Since the description of the 'Lotus Effect' by Barthlott and Neinhuis in 1997, the existence of superhydrophobic surfaces in the natural world has become common knowledge. Superhydrophobicity is associated with a number of possible evolutionary benefits that may be bestowed upon an organism, ranging from the ease of dewetting of their surfaces and therefore prevention of encumbrance by water droplets, self-cleaning and removal of particulates and potential pathogens, and even to antimicrobial activity. The superhydrophobic properties of natural surfaces have been attributed to the presence of hierarchical microscale (>1 μm) and nanoscale (typically below 200 nm) structures on the surface, and as a result, the generation of topographical hierarchy is usually considered of high importance in the fabrication of synthetic superhydrophobic surfaces. When one surveys the breadth of data available on naturally existing superhydrophobic surfaces, however, it can be observed that topographical hierarchy is not present on all naturally superhydrophobic surfaces; in fact, the only universal feature of these surfaces is the presence of a sophisticated nanoscale structure. Additionally, several natural surfaces, e.g. those present on rose petals and gecko feet, display high water contact angles and high adhesion of droplets, due to the pinning effect. These surfaces are not truly superhydrophobic, and lack significant degrees of nanoscale roughness. Here, we discuss the phenomena of superhydrophobicity and pseudo-superhydrophobicity in nature, and present an argument that while hierarchical surface roughness may aid in the stability of the superhydrophobic effect, it is nanoscale surface architecture alone that is the true determinant of superhydrophobicity. Copyright © 2014 Elsevier B.V. All rights reserved.

  19. Laser surface texturing: chosen problems

    Science.gov (United States)

    Antoszewski, Bogdan; Sek, Piotr

    2013-01-01

    In modern machines for realization of goals like lubrication intesyfication, heat flow intensyfiacation, microflow simulation; more and more often surface texturing is used. It became possible due to develepment of technologies that use sources of concentrated energy stream like microlasers. The paper shows results of experimental investigation on seal rings made of silicon carbide. Experiments were conducted using seal rings without surface modifications and a seal rings with a geometrical surface textures made with Nd:Yag laser.

  20. Flat surfaces and stability structures

    OpenAIRE

    2014-01-01

    We identify spaces of half-translation surfaces, equivalently complex curves with quadratic differential, with spaces of stability structures on Fukaya-type categories of punctured surfaces. This is achieved by new methods involving the complete classification of objects in these categories, which are defined in an elementary way. We also introduce a number of tools to deal with surfaces of infinite area, where structures similar to those in cluster algebra appear.

  1. Surface actuation of smart nanoshutters.

    Science.gov (United States)

    Morsch, S; Schofield, W C E; Badyal, J P S

    2010-07-20

    Patterned polymer brush surfaces have been fabricated using the molecular scratchcard lithography technique, where a functional top nanolayer (acting also as a resist) is selectively removed using a scanning probe tip to expose underlying atom-transfer radical polymerization (ATRP) initiator sites. The lateral spreading of grafted polymer brush patterns across the adjacent functional resist surface can be reversibly actuated via solvent exposure. Effectively, this methodology provides a means for hiding/unveiling functional surfaces on the nanoscale.

  2. How old is surface science?

    Energy Technology Data Exchange (ETDEWEB)

    Paparazzo, E. E-mail: paparazzo@ism.cnr.it

    2004-01-01

    Philosophical and literary testimonies from the Classical World (5th century B.C. to 3rd century A.D.) involving solid surfaces are reviewed. Plato thought the surface to be a real entity, whereas Aristotle considered it to possess an unqualified existence, i.e. not to be a substance, but just an accidental entity. The Old Stoics asserted that surfaces do not possess any physical existence, although the Stoic philosopher Posidonius--apparently the only exception in his school--held them to exist both in thought and reality. While both the Atomists and the Epicureans were very little interested in them, the Sceptic philosopher Sextus Empiricus considered surfaces to be the limits of a body, although he maintained that both the view that they are corporeal or the view that they are incorporeal present unsurmountable difficulties. Among Roman authors, the testimony from Pliny the Elder is mostly concerned with metallic surfaces, chemical change occurring there, and surface treatments used in antiquity. Besides the philosophical motivations, the implications of the testimonies are discussed in the light of surface science. The purely geometrical surface of Plato is found to compare favorably to single-crystal surface, Posidonius' 'corporeal' surface is best likened to an air-oxidized, or otherwise ambient-modified surface, and ancient accounts on mixture are compared to XPS results obtained in adhesion studies of enameled steels. I argue that the long-standing dominance of Aristotle's view from antiquity onwards may have had a part in delaying theoretical speculation into solid surfaces.

  3. Surface charge migration and dc surface flashover of surface-modified epoxy-based insulators

    Science.gov (United States)

    Li, Chuanyang; Hu, Jun; Lin, Chuanjie; Zhang, Boya; Zhang, Guixin; He, Jinliang

    2017-02-01

    Epoxy-based model insulators were manufactured and fluorinated under a F2/N2 mixture (12.5% F2) at 50 °C and 0.1 MPa for 15 min and 60 min. Surface charge accumulation and decay behavior were studied with and without dc voltage application. The effect of direct fluorination on surface charge migration as well as on flashover voltage was verified. The obtained results show that the charge decay of epoxy-based insulators is a slow process, but the decay rate increases when an outer dc electric field is applied. The surface charge distribution is changed when a streamer is triggered on the insulator surface. The existence of heteropolarity surface charges can decrease the dc surface flashover voltage to some extent, while the surface flashover voltage is almost unchanged when charges of the same polarity accumulate on the insulator surface. The short time fluorinated insulator can modify the surface resistivity, and the rate of surface charge dissipation is greatly increased under a dc electric field.

  4. Wetting properties of nanostructured surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Ramos-Canut, S. [Laboratoire de Physique de la Matiere Condensee et Nanostructures (UMR CNRS 5586), Universite Claude Bernard Lyon 1, 69622 Villeurbanne Cedex (France)]. E-mail: ramos@lpmcn.univ-lyon1.fr

    2006-04-15

    Swift heavy ion irradiation is a powerful tool to tailor surfaces under controlled conditions at a nanometric scale. The growing importance of nanostructured surfaces for a wide variety of applications and fundamental investigations is now well established. In this paper I will mainly discuss the interest of such surfaces for investigations concerning solid-liquid interfaces. The role played by topographical defects on wetting properties of solid surfaces, and both the dissipative and the confinement effects on the interface will be demonstrated by simple examples.

  5. Thermocapillary Flow on Superhydrophobic Surfaces

    CERN Document Server

    Baier, Tobias; Hardt, Steffen

    2010-01-01

    A liquid in Cassie-Baxter state above a structured superhydrophobic surface is ideally suited for surface driven transport due to its large free surface fraction in close contact to a solid. We investigate thermal Marangoni flow over a superhydrophobic array of fins oriented parallel or perpendicular to an applied temperature gradient. In the Stokes limit we derive an analytical expression for the bulk flow velocity above the surface and compare it with numerical solutions of the Navier-Stokes equation. Even for moderate temperature gradients comparatively large flow velocities are induced, suggesting to utilize this principle for microfluidic pumping.

  6. Cyclic $n$-gonal Surfaces

    CERN Document Server

    Broughton, S Allen

    2010-01-01

    A cyclic $n$-gonal surface is a compact Riemann surface $X$ of genus $g\\geq 2$ admitting a cyclic group of conformal automorphisms $C$ of order $n$ such that the quotient space $X/C$ has genus 0. In this paper, we provide an overview of ongoing research into automorphism groups of cyclic $n$-gonal surfaces. Much of the paper is expository or will appear in forthcoming papers, so proofs are usually omitted. Numerous explicit examples are presented illustrating the computational methods currently being used to study these surfaces.

  7. METABALL-BASED TRANSITION SURFACES

    Institute of Scientific and Technical Information of China (English)

    Li Lingfeng; Tan Jianrong; Chen Yuanpeng

    2005-01-01

    Metaball-based constraint deformation technique is used to change the definition of r, the straight-line distance from a space point to a constraint center in the original calculation of the potential function. By replacing the parameter of the parametrized surface w with the straight-line distance r, a method of building transition surfaces according to connected boundary curves and skeleton curves is proposed. The method has no restrictions on boundary curves that control the space shapes of transition surfaces or on types of skeleton curves, thus transition surfaces, which reach C1 continuity and are more abundant in shapes and natural, can be obtained.

  8. Integral Menger curvature for surfaces

    OpenAIRE

    Strzelecki, Paweł; von der Mosel, Heiko

    2009-01-01

    We develop the concept of integral Menger curvature for a large class of nonsmooth surfaces. We prove uniform Ahlfors regularity and a $C^{1,\\lambda}$-a-priori bound for surfaces for which this functional is finite. In fact, it turns out that there is an explicit length scale $R>0$ which depends only on an upper bound $E$ for the integral Menger curvature $M_p(\\Sigma)$ and the integrability exponent $p$, and \\emph{not} on the surface $\\Sigma$ itself; below that scale, each surface with energy...

  9. Modeling of biological nanostructured surfaces

    Science.gov (United States)

    Cristea, P. D.; Tuduce, Rodica; Arsene, O.; Dinca, Alina; Fulga, F.; Nicolau, D. V.

    2010-02-01

    The paper presents a methodology using atom or amino acid hydrophobicities to describe the surface properties of proteins in order to predict their interactions with other proteins and with artificial nanostructured surfaces. A standardized pattern is built around each surface atom of the protein for a radius depending on the molecule type and size. The atom neighborhood is characterized in terms of the hydrophobicity surface density. A clustering algorithm is used to classify the resulting patterns and to identify the possible interactions. The methodology has been implemented in a software package based on Java technology deployed in a Linux environment.

  10. Magnetic slippery extreme icephobic surfaces

    Science.gov (United States)

    Irajizad, Peyman; Hasnain, Munib; Farokhnia, Nazanin; Sajadi, Seyed Mohammad; Ghasemi, Hadi

    2016-11-01

    Anti-icing surfaces have a critical footprint on daily lives of humans ranging from transportation systems and infrastructure to energy systems, but creation of these surfaces for low temperatures remains elusive. Non-wetting surfaces and liquid-infused surfaces have inspired routes for the development of icephobic surfaces. However, high freezing temperature, high ice adhesion strength, and high cost have restricted their practical applications. Here we report new magnetic slippery surfaces outperforming state-of-the-art icephobic surfaces with a ice formation temperature of -34 °C, 2-3 orders of magnitude higher delay time in ice formation, extremely low ice adhesion strength (~2 Pa) and stability in shear flows up to Reynolds number of 105. In these surfaces, we exploit the magnetic volumetric force to exclude the role of solid-liquid interface in ice formation. We show that these inexpensive surfaces are universal and can be applied to all types of solids (no required micro/nano structuring) with no compromise to their unprecedented properties.

  11. Radioactive Probes on Ferromagnetic Surfaces

    CERN Multimedia

    2002-01-01

    On the (broad) basis of our studies of nonmagnetic radioactive probe atoms on magnetic surfaces and at interfaces, we propose to investigate the magnetic interaction of magnetic probe atoms with their immediate environment, in particular of rare earth (RE) elements positioned on and in ferromagnetic surfaces. The preparation and analysis of the structural properties of such samples will be performed in the UHV chamber HYDRA at the HMI/Berlin. For the investigations of the magnetic properties of RE atoms on surfaces Perturbed Angular Correlation (PAC) measurements and Mössbauer Spectroscopy (MS) in the UHV chamber ASPIC (Apparatus for Surface Physics and Interfaces at CERN) are proposed.

  12. Antibacterial surface design - Contact kill

    Science.gov (United States)

    Kaur, Rajbir; Liu, Song

    2016-08-01

    Designing antibacterial surfaces has become extremely important to minimize Healthcare Associated Infections which are a major cause of mortality worldwide. A previous biocide-releasing approach is based on leaching of encapsulated biocides such as silver and triclosan which exerts negative impacts on the environment and potentially contributes to the development of bacterial resistance. This drawback of leachable compounds led to the shift of interest towards a more sustainable and environmentally friendly approach: contact-killing surfaces. Biocides that can be bound onto surfaces to give the substrates contact-active antibacterial activity include quaternary ammonium compounds (QACs), quaternary phosphoniums (QPs), carbon nanotubes, antibacterial peptides, and N-chloramines. Among the above, QACs and N-chloramines are the most researched contact-active biocides. We review the engineering of contact-active surfaces using QACs or N-chloramines, the modes of actions as well as the test methods. The charge-density threshold of cationic surfaces for desired antibacterial efficacy and attempts to combine various biocides for the generation of new contact-active surfaces are discussed in detail. Surface positive charge density is identified as a key parameter to define antibacterial efficacy. We expect that this research field will continue to attract more research interest in view of the potential impact of self-disinfective surfaces on healthcare-associated infections, food safety and corrosion/fouling resistance required on industrial surfaces such as oil pipes and ship hulls.

  13. The surface energy of metals

    DEFF Research Database (Denmark)

    Vitos, Levente; Ruban, Andrei; Skriver, Hans Lomholt

    1998-01-01

    We have used density functional theory to establish a database of surface energies for low index surfaces of 60 metals in the periodic table. The data may be used as a consistent starting point for models of surface science phenomena. The accuracy of the database is established in a comparison...... with other density functional theory results and the calculated surface energy anisotropies are applied in a determination of the equilibrium shape of nano-crystals of Fe, Cu, Mo, Ta, Pt and Ph. (C) 1998 Elsevier Science B.V. All rights reserved....

  14. Analysis of cell surface antigens by Surface Plasmon Resonance imaging

    NARCIS (Netherlands)

    Stojanovic, I.; Schasfoort, R.B.M.; Terstappen, L.W.M.M.

    2013-01-01

    Surface Plasmon Resonance (SPR) is most commonly used to measure bio-molecular interactions. SPR is used significantly less frequent for measuring whole cell interactions. Here we introduce a method to measure whole cells label free using the specific binding of cell surface antigens expressed on th

  15. Molecule scattering from solid surfaces : Orientation and surface corrugation effects

    NARCIS (Netherlands)

    Vicanek, M; Schlatholter, T; Heiland, W

    1997-01-01

    Various effects connected with orientation and surface corrugation in molecule scattering from solid surfaces are investigated by means of classical trajectories simulations for H-2 impinging on Pd(110). Primary excitation of the projectiles is modeled according to the situation in molecular beam ex

  16. Surface anatomy and surface landmarks for thoracic surgery: Part II.

    Science.gov (United States)

    Smith, Shona E; Darling, Gail E

    2011-05-01

    Surface anatomy is an integral part of a thoracic surgeon's armamentarium to assist with the diagnosis, staging, and treatment of thoracic pathology. As reviewed in this article, the surface landmarks of the lungs, heart, great vessels, and mediastinum are critical for appropriate patient care and should be learned in conjunction with classic anatomy.

  17. Surface and Step Conductivities on Si(111) Surfaces.

    Science.gov (United States)

    Just, Sven; Blab, Marcus; Korte, Stefan; Cherepanov, Vasily; Soltner, Helmut; Voigtländer, Bert

    2015-08-07

    Four-point measurements using a multitip scanning tunneling microscope are carried out in order to determine surface and step conductivities on Si(111) surfaces. In a first step, distance-dependent four-point measurements in the linear configuration are used in combination with an analytical three-layer model for charge transport to disentangle the 2D surface conductivity from nonsurface contributions. A termination of the Si(111) surface with either Bi or H results in the two limiting cases of a pure 2D or 3D conductance, respectively. In order to further disentangle the surface conductivity of the step-free surface from the contribution due to atomic steps, a square four-probe configuration is applied as a function of the rotation angle. In total, this combined approach leads to an atomic step conductivity of σ(step)=(29±9)  Ω(-1) m(-1) and to a step-free surface conductivity of σ(surf)=(9±2)×10(-6)  Ω(-1)/□ for the Si(111)-(7×7) surface.

  18. Analysis of cell surface antigens by Surface Plasmon Resonance imaging

    NARCIS (Netherlands)

    Stojanovic, Ivan; Schasfoort, Richardus B.M.; Terstappen, Leonardus Wendelinus Mathias Marie

    2013-01-01

    Surface Plasmon Resonance (SPR) is most commonly used to measure bio-molecular interactions. SPR is used significantly less frequent for measuring whole cell interactions. Here we introduce a method to measure whole cells label free using the specific binding of cell surface antigens expressed on th

  19. Surface-to-surface registration using level sets

    DEFF Research Database (Denmark)

    Hansen, Mads Fogtmann; Erbou, Søren G.; Vester-Christensen, Martin;

    2007-01-01

    This paper presents a general approach for surface-to-surface registration (S2SR) with the Euclidean metric using signed distance maps. In addition, the method is symmetric such that the registration of a shape A to a shape B is identical to the registration of the shape B to the shape A. The S2S...

  20. Interactive Display of Surfaces Using Subdivision Surfaces and Wavelets

    Energy Technology Data Exchange (ETDEWEB)

    Duchaineau, M A; Bertram, M; Porumbescu, S; Hamann, B; Joy, K I

    2001-10-03

    Complex surfaces and solids are produced by large-scale modeling and simulation activities in a variety of disciplines. Productive interaction with these simulations requires that these surfaces or solids be viewable at interactive rates--yet many of these surfaced solids can contain hundreds of millions of polygondpolyhedra. Interactive display of these objects requires compression techniques to minimize storage, and fast view-dependent triangulation techniques to drive the graphics hardware. In this paper, we review recent advances in subdivision-surface wavelet compression and optimization that can be used to provide a framework for both compression and triangulation. These techniques can be used to produce suitable approximations of complex surfaces of arbitrary topology, and can be used to determine suitable triangulations for display. The techniques can be used in a variety of applications in computer graphics, computer animation and visualization.

  1. Correlating simulated surface marks with near-surface tornado structure

    Science.gov (United States)

    Zimmerman, Michael I.

    Tornadoes often leave behind patterns of debris deposition, or "surface marks", which provide a direct signature of their near surface winds. The intent of this thesis is to investigate what can be learned about near-surface tornado structure and intensity through the properties of surface marks generated by simulated, debris-laden tornadoes. Earlier work showed through numerical simulations that the tornado's structure and intensity is highly sensitive to properties of the near-surface flow and can change rapidly in time for some conditions. The strongest winds often occur within tens of meters of the surface where the threat to human life and property is highest, and factors such as massive debris loadings and asymmetry of the main vortex have proven to be critical complications in some regimes. However, studying this portion of the flow in the field is problematic; while Doppler radar provides the best tornado wind field measurements, it cannot probe below about 20 m, and interpretation of Doppler data requires assumptions about tornado symmetry, steadiness in time, and correlation between scatterer and air velocities that are more uncertain near the surface. As early as 1967, Fujita proposed estimating tornado wind speeds from analysis of aerial photography and ground documentation of surface marks. A handful of studies followed but were limited by difficulties in interpreting physical origins of the marks, and little scientific attention has been paid to them since. Here, Fujita's original idea is revisited in the context of three-dimensional, large-eddy simulations of tornadoes with fully-coupled debris. In this thesis, the origins of the most prominent simulated marks are determined and compared with historical interpretations of real marks. The earlier hypothesis that cycloidal surface marks were directly correlated with the paths of individual vortices (either the main vortex or its secondary vortices, when present) is unsupported by the simulation results

  2. Surface Evolution during MBE Growth

    Science.gov (United States)

    Orme, C.; Orr, B. G.

    The evolution of surfaces grown using molecular beam epitaxy (MBE) is an interesting scientific issue as well as an important technological concern. In this review article we examine surface evolution during film growth from several different points of view. Experimental, simulational and analytical descriptions of the process are discussed.

  3. Sculpturing Surfaces with Cartan Ribbons

    DEFF Research Database (Denmark)

    Raffaelli, Matteo; Bohr, Jakob; Markvorsen, Steen

    2016-01-01

    Using the concepts of Cartan development and rolling from differential geometry we develop a method for sculpturing any surface with the use of Cartan ribbons.......Using the concepts of Cartan development and rolling from differential geometry we develop a method for sculpturing any surface with the use of Cartan ribbons....

  4. Are Vicinal Metal Surfaces Stable?

    DEFF Research Database (Denmark)

    Frenken, J. W. M.; Stoltze, Per

    1999-01-01

    We use effective medium theory to demonstrate that the energies of many metal surfaces are lowered when these surfaces are replaced by facets with lower-index orientations. This implies that the low-temperature equilibrium shapes of many metal crystals should be heavily faceted. The predicted ins...

  5. Probing Chemical Dynamics at Surfaces

    Institute of Scientific and Technical Information of China (English)

    KLEYN, A.W.; KLEYN, A.W

    2001-01-01

    An account is given of recent progress concerning chemical reaction dynamics at surfaces. The goal is to elucidate the reaction dynamics at the molecular level, both as time and distance is concerned. The methods of study include molecular beam scattering, scanning tunnelling microscopy, and (femtosecond) laser spectroscopy. Systems studied include elementary interactions of NO, CO, and O2 at single crystal metal surfaces.

  6. Surfaces parametrised by the normals

    DEFF Research Database (Denmark)

    Gravesen, Jens

    2007-01-01

    the origin to the tangent plane and the surface is simply considered as the envelope of its family of tangent planes. Suppose we are given points and normals and we want a C^k-surface interpolating these data. The data gives the value and gradients of the support function at certain points (the given normals...

  7. Lightness Constancy in Surface Visualization.

    Science.gov (United States)

    Szafir, Danielle Albers; Sarikaya, Alper; Gleicher, Michael

    2016-09-01

    Color is a common channel for displaying data in surface visualization, but is affected by the shadows and shading used to convey surface depth and shape. Understanding encoded data in the context of surface structure is critical for effective analysis in a variety of domains, such as in molecular biology. In the physical world, lightness constancy allows people to accurately perceive shadowed colors; however, its effectiveness in complex synthetic environments such as surface visualizations is not well understood. We report a series of crowdsourced and laboratory studies that confirm the existence of lightness constancy effects for molecular surface visualizations using ambient occlusion. We provide empirical evidence of how common visualization design decisions can impact viewers' abilities to accurately identify encoded surface colors. These findings suggest that lightness constancy aids in understanding color encodings in surface visualization and reveal a correlation between visualization techniques that improve color interpretation in shadow and those that enhance perceptions of surface depth. These results collectively suggest that understanding constancy in practice can inform effective visualization design.

  8. Dilution of Buoyant Surface Plumes

    DEFF Research Database (Denmark)

    Larsen, Torben; Petersen, Ole

    The purpose of present work is to establish a quantitative description of a surface plume which is valid for the range of density differences occurring in relation to sewage outfalls.......The purpose of present work is to establish a quantitative description of a surface plume which is valid for the range of density differences occurring in relation to sewage outfalls....

  9. Surface chemistry in three dimensions

    DEFF Research Database (Denmark)

    Bollinger, Mikkel; Jacobsen, Karsten Wedel; Nørskov, Jens Kehlet

    2000-01-01

    Based on self-consistent density functional calculations it is shown that a new dissociation process for CO adsorbed on a Ru(0001) surface is made possible when the distance to a second Ru(0001) surface placed just above it is below some critical value. This '3D' process is more facile than the u...

  10. Surface Waves on Metamaterials Interfaces

    DEFF Research Database (Denmark)

    Takayama, Osamu; Shkondin, Evgeniy; Panah, Mohammad Esmail Aryaee

    2016-01-01

    We analyze surface electromagnetic waves supported at the interface between isotropic medium and effective anisotropic material that can be realized by alternating conductive and dielectrics layers. This configuration can host various types of surface waves and therefore can serve as a rich platf...

  11. Interference effects with surface plasmons

    NARCIS (Netherlands)

    Kuzmin, Nikolay Victorovich

    2008-01-01

    A surface plasmon is a purely two-dimensional electromagnetic excitation bound to the interface between metal and dielectric and quickly decaying away from it. A surface plasmon is able to concentrate light on sub-wavelength scales – a feature that is attractive for nano-photonics and integrated

  12. Nitrogen Scattering at Ru Surfaces

    NARCIS (Netherlands)

    Zaharia, T.; Ueta, H.; Kleyn, A.W.; Gleeson, M.A.

    2013-01-01

    Results on the scattering of hyperthermal N2 molecules from bare and N-covered Ru(0001) surfaces are presented. These are compared with Ar scattering from the same surfaces as a reference nonreactive system. In the case of bare Ru(0001) the measured angular distributions are consistent with scatteri

  13. Nitrogen Scattering at Ru Surfaces

    NARCIS (Netherlands)

    Zaharia, T.; Ueta, H.; Kleyn, A. W.; Gleeson, M. A.

    2013-01-01

    Results on the scattering of hyperthermal N2 molecules from bare and N-covered Ru(0001) surfaces are presented. These are compared with Ar scattering from the same surfaces as a reference non-reactive system. In the case of bare Ru(0001) the measured angular distributions are consistent with scatter

  14. Nitrogen Scattering at Ru Surfaces

    NARCIS (Netherlands)

    Zaharia, T.; Ueta, H.; Kleyn, A.W.; Gleeson, M.A.

    2013-01-01

    Results on the scattering of hyperthermal N-2 molecules from bare and N-covered Ru(0001) surfaces are presented. These are compared with Ar scattering from the same surfaces as a reference non-reactive system. In the case of bare Ru(0001) the measured angular distributions are consistent with scatte

  15. Vibrational states on Pd surfaces

    Science.gov (United States)

    Sklyadneva, I. Yu.; Rusina, G. G.; Chulkov, E. V.

    1997-04-01

    We present the calculation of vibrational modes and lattice relaxation for the Pd(100), (110) and (111) surfaces. The surface phonon frequencies and polarizations are obtained using embedded-atom potentials. Comparison of the calculated frequency values with available experimental data gives agreement within 0.2 THz.

  16. Covariant description of isothermic surfaces

    CERN Document Server

    Tafel, Jacek

    2014-01-01

    We present a covariant formulation of the Gauss-Weingarten equations and the Gauss-Mainardi-Codazzi equations for surfaces in 3-dimensional curved spaces. We derive a coordinate invariant condition on the first and second fundamental form which is necessary and sufficient for the surface to be isothermic.

  17. Closed surfaces and character varieties

    CERN Document Server

    Chesebro, Eric

    2012-01-01

    The powerful character variety techniques of Culler and Shalen can be used to find essential surfaces in knot manifolds. We show that module structures on the coordinate ring of the character variety can be used to identify detected boundary slopes as well as when closed surfaces are detected. This approach also yields new number theoretic invariants for the character varieties of knot manifolds.

  18. Organic chemistry on solid surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Zhen; Zaera, Francisco [Department of Chemistry, University of California, Riverside, CA 92521 (United States)

    2006-07-15

    Chemistry on solid surfaces is central to many areas of practical interest such as heterogeneous catalysis, tribology, electrochemistry, and materials processing. With the development of many surface-sensitive analytical techniques in the past decades, great advances have been possible in our understanding of such surface chemistry at the molecular level. Earlier studies with model systems, single crystals in particular, have provided rich information about the adsorption and reaction kinetics of simple inorganic molecules. More recently, the same approach has been expanded to the study of the surface chemistry of relatively complex organic molecules, in large measure in connection with the selective synthesis of fine chemicals and pharmaceuticals. In this report, the chemical reactions of organic molecules and fragments on solid surfaces, mainly on single crystals of metals but also on crystals of metal oxides, carbides, nitrides, phosphides, sulfides and semiconductors as well as on more complex models such as bimetallics, alloys, and supported particles, are reviewed. A scheme borrowed from the organometallic and organic chemistry literature is followed in which key examples of representative reactions are cited first, and general reactivity trends in terms of both the reactants and the nature of the surface are then identified to highlight important mechanistic details. An attempt has been made to emphasize recent advances, but key earlier examples are cited as needed. Finally, correlations between surface and organometallic and organic chemistry, the relevance of surface reactions to applied catalysis and materials functionalization, and some promising future directions in this area are briefly discussed. (author)

  19. Luminescent Surface Quaternized Carbon Dots

    KAUST Repository

    Bourlinos, Athanasios B.

    2012-01-10

    Thermal oxidation of a salt precursor made from the acid base combination of tris(hydroxymethyl)aminomethane and betaine hydrochloride results in light-emitting surface quaternized carbon dots that are water-dispersible, display anion exchange properties, and exhibit uniform size/surface charge. © 2011 American Chemical Society.

  20. Surface Waves on Metamaterials Interfaces

    DEFF Research Database (Denmark)

    Takayama, Osamu; Shkondin, Evgeniy; Panah, Mohammad Esmail Aryaee;

    2016-01-01

    We analyze surface electromagnetic waves supported at the interface between isotropic medium and effective anisotropic material that can be realized by alternating conductive and dielectrics layers. This configuration can host various types of surface waves and therefore can serve as a rich platf...

  1. Surface Detection using Round Cut

    DEFF Research Database (Denmark)

    Dahl, Vedrana Andersen; Dahl, Anders Bjorholm; Larsen, Rasmus

    2014-01-01

    We propose an iterative method for detecting closed surfaces in a volumetric data, where an optimal search is performed in a graph build upon a triangular mesh. Our approach is based on previous techniques for detecting an optimal terrain-like or tubular surface employing a regular grid. Unlike s...

  2. Uniqueness of PL Minimal Surfaces

    Institute of Scientific and Technical Information of China (English)

    Yi NI

    2007-01-01

    Using a standard fact in hyperbolic geometry, we give a simple proof of the uniqueness of PL minimal surfaces, thus filling in a gap in the original proof of Jaco and Rubinstein. Moreover, in order to clarify some ambiguity, we sharpen the definition of PL minimal surfaces, and prove a technical lemma on the Plateau problem in the hyperbolic space.

  3. Surface science of heterogeneous reactions.

    Science.gov (United States)

    White, J M

    1982-10-29

    Some of the present and future directions for surface science as a growing and naturally interdisciplinary subject are reviewed. Particular attention is given to surface reaction chemistry as it is related to heterogenous catalysis, a subject area where there are abundant opportunities for detailed measurements of structure and dynamics at the molecular level.

  4. 77 FR 50165 - Escape and Evacuation Plans for Surface Coal Mines, Surface Facilities and Surface Work Areas of...

    Science.gov (United States)

    2012-08-20

    ... Administration. Title: Escape and Evacuation Plans for Surface Coal Mines, Surface Facilities ] and Surface Work... Safety and Health Administration Escape and Evacuation Plans for Surface Coal Mines, Surface Facilities and Surface Work Areas of Underground Coal Mines AGENCY: Mine Safety and Health Administration,...

  5. Advances in surfaces and osseointegration in implantology. Biomimetic surfaces.

    Science.gov (United States)

    Albertini, Matteo; Fernandez-Yague, Marc; Lázaro, Pedro; Herrero-Climent, Mariano; Rios-Santos, Jose-Vicente; Bullon, Pedro; Gil, Francisco-Javier

    2015-05-01

    The present work is a revision of the processes occurring in osseointegration of titanium dental implants according to different types of surfaces -namely, polished surfaces, rough surfaces obtained from subtraction methods, as well as the new hydroxyapatite biomimetic surfaces obtained from thermochemical processes. Hydroxyapatite's high plasma-projection temperatures have proven to prevent the formation of crystalline apatite on the titanium dental implant, but lead to the formation of amorphous calcium phosphate (i.e., with no crystal structure) instead. This layer produce some osseointegration yet the calcium phosphate layer will eventually dissolve and leave a gap between the bone and the dental implant, thus leading to osseointegration failure due to bacterial colonization. A new surface -recently obtained by thermochemical processes- produces, by crystallization, a layer of apatite with the same mineral content as human bone that is chemically bonded to the titanium surface. Osseointegration speed was tested by means of minipigs, showing bone formation after 3 to 4 weeks, with the security that a dental implant can be loaded. This surface can be an excellent candidate for immediate or early loading procedures.

  6. Scanning Surface Potential Microscopy of Spore Adhesion on Surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ida [University of Tennessee, Knoxville (UTK); Chung, Eunhyea [Georgia Institute of Technology; Kweon, Hyojin [Georgia Institute of Technology; Yiacoumi, Sotira [Georgia Institute of Technology; Tsouris, Costas [ORNL

    2012-01-01

    The adhesion of spores of Bacillus anthracis - the cause of anthrax and a likely biological threat - to solid surfaces is an important consideration in cleanup after an accidental or deliberate release. However, because of safety concerns, directly studying B. anthracis spores with advanced instrumentation is problematic. As a first step, we are examining the electrostatic potential of Bacillus thuringiensis (Bt), which is a closely related species that is often used as a simulant to study B. anthracis. Scanning surface potential microscopy (SSPM), also known as Kelvin probe force microscopy (KPFM), was used to investigate the influence of relative humidity (RH) on the surface electrostatic potential of Bt that had adhered to silica, mica, or gold substrates. AFM/SSPM side-by-side images were obtained separately in air, at various values of RH, after an aqueous droplet with spores was applied on each surface and allowed to dry before measurements. In the SSPM images, a negative potential on the surface of the spores was observed compared with that of the substrates. The surface potential decreased as the humidity increased. Spores were unable to adhere to a surface with an extremely negative potential, such as mica.

  7. Surface characterization of silicate bioceramics.

    Science.gov (United States)

    Cerruti, Marta

    2012-03-28

    The success of an implanted prosthetic material is determined by the early events occurring at the interface between the material and the body. These events depend on many surface properties, with the main ones including the surface's composition, porosity, roughness, topography, charge, functional groups and exposed area. This review will portray how our understanding of the surface reactivity of silicate bioceramics has emerged and evolved in the past four decades, owing to the adoption of many complementary surface characterization tools. The review is organized in sections dedicated to a specific surface property, each describing how the property influences the body's response to the material, and the tools that have been adopted to analyse it. The final section introduces the techniques that have yet to be applied extensively to silicate bioceramics, and the information that they could provide.

  8. Surface states in photonic crystals

    Directory of Open Access Journals (Sweden)

    Vojtíšek P.

    2013-05-01

    Full Text Available Among many unusual and interesting physical properties of photonic crystals (PhC, in recent years, the propagation of surface electromagnetic waves along dielectric PhC boundaries have attracted considerable attention, also in connection to their possible applications. Such surfaces states, produced with the help of specialized defects on PhC boundaries, similarly to surfaces plasmons, are localized surfaces waves and, as such, can be used in various sensing applications. In this contribution, we present our recent studies on numerical modelling of surface states (SS for all three cases of PhC dimensionality. Simulations of these states were carried out by the use of plane wave expansion (PWE method via the MIT MPB package.

  9. Molecular tailoring of solid surfaces

    CERN Document Server

    Evenson, S A

    1997-01-01

    The overall performance of a material can be dramatically improved by tailoring its surface at the molecular level. The aim of this project was to develop a universal technique for attaching dendrimers (well-defined, nanoscale, functional polymers) and Jeffamines (high molecular weight polymer chains) to the surface of any shaped solid substrate. This desire for controlled functionalization is ultimately driven by the need to improve material compatibility in various biomedical applications. Atomic force microscopy (AFM) was used initially to study the packing and structure of Langmuir-Blodgett films on surfaces, and subsequently resulted in the first visualization of individual, spherically shaped, nanoscopic polyamidoamine dendrimers. The next goal was to develop a methodology for attaching such macromolecules to inert surfaces. Thin copolymer films were deposited onto solid substrates to produce materials with a fixed concentration of surface anhydride groups. Vapor-phase functionalization reactions were t...

  10. Plastic Deformation of Metal Surfaces

    DEFF Research Database (Denmark)

    Hansen, Niels; Zhang, Xiaodan; Huang, Xiaoxu

    2013-01-01

    parameters by TEM and EBSD and apply strength-structural relationships established for the bulk metal deformed to high strains. This technique has been applied to steel deformed by high energy shot peening and a calculated stress gradient at or near the surface has been successfully validated by hardness......Plastic deformation of metal surfaces by sliding and abrasion between moving parts can be detrimental. However, when the plastic deformation is controlled for example by applying different peening techniques hard surfaces can be produced which can increase the fracture resistance and fatigue life...... of metal components. An optimization of processes and material parameters must be based on a quantification of stress and strain gradients at the surface and in near surface layer where the structural scale can reach few tens of nanometers. For such fine structures it is suggested to quantify structural...

  11. Physics of Surfaces and Interfaces

    CERN Document Server

    Ibach, Harald

    2006-01-01

    This graduate-level textbook covers the major developments in surface sciences of recent decades, from experimental tricks and basic techniques to the latest experimental methods and theoretical understanding. It is unique in its attempt to treat the physics of surfaces, thin films and interfaces, surface chemistry, thermodynamics, statistical physics and the physics of the solid/electrolyte interface in an integral manner, rather than in separate compartments. The Physics of Surfaces and Interfaces is designed as a handbook for the researcher as well as a study-text for graduate students in physics or chemistry with special interest in the surface sciences, material science, or the nanosciences. The experienced researcher, professional or academic teacher will appreciate the opportunity to share many insights and ideas that have grown out of the author's long experience. Readers will likewise appreciate the wide range of topics treated, each supported by extensive references. Graduate students will benefit f...

  12. Nanobubble trouble on gold surfaces

    DEFF Research Database (Denmark)

    Holmberg, Maria; Kuhle, A.; Garnaes, J.

    2003-01-01

    When analyzing surfaces related to biosensors with in situ atomic force microscopy (AFM), the existence of nanobubbles called for our attention. The bubbles seem to form spontaneously when gold surfaces are immersed in clean water and are probably a general phenomenon at water-solid interfaces....... Besides from giving rise to undesired effects in, for example, biosensors, nanobubbles can also cause artifacts in AFM imaging. We have observed nanobubbles on unmodified gold surfaces, immersed in clean water, using standard silicon AFM probes. Nanobubbles can be made to disappear from contact mode AFM...... tip and the nanobubble indicates that a small tip cone angle and a relatively hydrophilic tip surface makes it possible to image nanobubbles with contact mode AFM even though the tip has penetrated the surface of the bubble....

  13. Modern techniques of surface science

    CERN Document Server

    Woodruff, D Phil

    2016-01-01

    This fully revised, updated and reorganised third edition provides a thorough introduction to the characterisation techniques used in surface science and nanoscience today. Each chapter brings together and compares the different techniques used to address a particular research question, including how to determine the surface composition, surface structure, surface electronic structure, surface microstructure at different length scales (down to sub-molecular), and the molecular character of adsorbates and their adsorption or reaction properties. Readers will easily understand the relative strengths and limitations of the techniques available to them and, ultimately, will be able to select the most suitable techniques for their own particular research purposes. This is an essential resource for researchers and practitioners performing materials analysis, and for senior undergraduate students looking to gain a clear understanding of the underlying principles and applications of the different characterisation tec...

  14. Computational approach to Riemann surfaces

    CERN Document Server

    Klein, Christian

    2011-01-01

    This volume offers a well-structured overview of existent computational approaches to Riemann surfaces and those currently in development. The authors of the contributions represent the groups providing publically available numerical codes in this field. Thus this volume illustrates which software tools are available and how they can be used in practice. In addition examples for solutions to partial differential equations and in surface theory are presented. The intended audience of this book is twofold. It can be used as a textbook for a graduate course in numerics of Riemann surfaces, in which case the standard undergraduate background, i.e., calculus and linear algebra, is required. In particular, no knowledge of the theory of Riemann surfaces is expected; the necessary background in this theory is contained in the Introduction chapter. At the same time, this book is also intended for specialists in geometry and mathematical physics applying the theory of Riemann surfaces in their research. It is the first...

  15. Surface electrostatics: theory and computations

    KAUST Repository

    Chatzigeorgiou, G.

    2014-02-05

    The objective of this work is to study the electrostatic response of materials accounting for boundary surfaces with their own (electrostatic) constitutive behaviour. The electric response of materials with (electrostatic) energetic boundary surfaces (surfaces that possess material properties and constitutive structures different from those of the bulk) is formulated in a consistent manner using a variational framework. The forces and moments that appear due to bulk and surface electric fields are also expressed in a consistent manner. The theory is accompanied by numerical examples on porous materials using the finite-element method, where the influence of the surface electric permittivity on the electric displacement, the polarization stress and the Maxwell stress is examined.

  16. Pancake bouncing on superhydrophobic surfaces

    Science.gov (United States)

    Liu, Yahua; Moevius, Lisa; Xu, Xinpeng; Qian, Tiezheng; Yeomans, Julia M.; Wang, Zuankai

    2014-07-01

    Engineering surfaces that promote rapid drop detachment is of importance to a wide range of applications including anti-icing, dropwise condensation and self-cleaning. Here we show how superhydrophobic surfaces patterned with lattices of submillimetre-scale posts decorated with nanotextures can generate a counter-intuitive bouncing regime: drops spread on impact and then leave the surface in a flattened, pancake shape without retracting. This allows a fourfold reduction in contact time compared with conventional complete rebound . We demonstrate that the pancake bouncing results from the rectification of capillary energy stored in the penetrated liquid into upward motion adequate to lift the drop. Moreover, the timescales for lateral drop spreading over the surface and for vertical motion must be comparable. In particular, by designing surfaces with tapered micro/nanotextures that behave as harmonic springs, the timescales become independent of the impact velocity, allowing the occurrence of pancake bouncing and rapid drop detachment over a wide range of impact velocities.

  17. Atmosphere-surface interactions over polar oceans and heterogeneous surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Vihma, T.

    1995-12-31

    Processes of interaction between the atmospheric boundary layer and the planetary surface have been studied with special emphasis on polar ocean surfaces: the open ocean, leads, polynyas and sea ice. The local exchange of momentum, heat and moisture has been studied experimentally both in the Weddell Sea and in the Greenland Sea. Exchange processes over heterogeneous surfaces are addressed by modelling studies. Over a homogeneous surface, the local turbulent fluxes can be reasonably well estimated using an iterative flux-profile scheme based on the Monin-Obukhov similarity theory. In the Greenland Sea, the near-surface air temperature and the generally small turbulent fluxes over the open ocean were affected by the sea surface temperature fronts. Over the sea ice cover in the Weddell Sea, the turbulent sensible heat flux was generally downwards, and together with an upward oceanic heat flux through the ice it compensated the heat loss from the surface via long-wave radiation. The wind dominated on time scales of days, while the current became important on longer time scales. The drift dynamics showed apparent spatial differences between the eastern and western regions, as well as between the Antarctic Circumpolar Current and the rest of the Weddell Sea. Inertial motion was present in regions of low ice concentration. The surface heterogeneity, arising e.g. from roughness or temperature distribution, poses a problem for the parameterization of surface exchange processes in large-scale models. In the case of neutral flow over a heterogeneous terrain, an effective roughness length can be used to parameterize the roughness effects

  18. Polyspecies biofilm formation on implant surfaces with different surface characteristics

    Directory of Open Access Journals (Sweden)

    Patrick R. SCHMIDLIN

    2013-01-01

    Full Text Available Objective To investigate the microbial adherence and colonization of a polyspecies biofilm on 7 differently processed titanium surfaces. Material and Methods Six-species biofilms were formed anaerobically on 5-mm-diameter sterilized, saliva-preconditioned titanium discs. Material surfaces used were either machined, stained, acid-etched or sandblasted/acid-etched (SLA. Samples of the latter two materials were also provided in a chemically modified form, with increased wettability characteristics. Surface roughness and contact angles of all materials were determined. The discs were then incubated anaerobically for up to 16.5 h. Initial microbial adherence was evaluated after 20 min incubation and further colonization after 2, 4, 8, and 16.5 h using non-selective and selective culture techniques. Results at different time points were compared using ANOVA and Scheffé post hoc analysis. Results The mean differences in microorganisms colonizing after the first 20 min were in a very narrow range (4.5 to 4.8 log CFU. At up to 16.5 h, the modified SLA surface exhibited the highest values for colonization (6.9±0.2 log CFU, p<0.05 but increasing growth was observed on all test surfaces over time. Discrepancies among bacterial strains on the differently crafted titanium surfaces were very similar to those described for total log CFU. F. nucleatum was below the detection limit on all surfaces after 4 h. Conclusion Within the limitations of this in vitro study, surface roughness had a moderate influence on biofilm formation, while wettability did not seem to influence biofilm formation under the experimental conditions described. The modified SLA surface showed the highest trend for bacterial colonization.

  19. Scattering of Light and Surface Plasmon Polaritons from Rough Surfaces

    Science.gov (United States)

    2013-06-14

    approximation for surface plasmon polaritons,” Proc. SPIE 7792, 779204 (1-9)(2010). [10] J. Polanco , R.M. Fitzgerald, T.A. Leskova, and A.A. Maradudin...condition,” Phys. Rev. A 84, 013801 (1-8) (2011). [12] J. Polanco , R.M. Fitzgerald, and A.A. Maradudin, “Propagation of s-polarized surface polaritons...surface plasmon polaritons,” Phys. Rev. A 86, 043805(1-4)(2012). [15] R.M. Fitzgerald, A.A. Maradudin, J. Polanco , and A.B. Shvartsburg, “S-polarized

  20. Surface thermodynamics, surface stress, equations at surfaces and triple lines for deformable bodies.

    Science.gov (United States)

    Olives, Juan

    2010-03-01

    The thermodynamics and mechanics of the surface of a deformable body are studied here, following and refining the general approach of Gibbs. It is first shown that the 'local' thermodynamic variables of the state of the surface are only the temperature, the chemical potentials and the surface strain tensor (true thermodynamic variables, for a viscoelastic solid or a viscous fluid). A new definition of the surface stress is given and the corresponding surface thermodynamics equations are presented. The mechanical equilibrium equation at the surface is then obtained. It involves the surface stress and is similar to the Cauchy equation for the volume. Its normal component is a generalization of the Laplace equation. At a (body-fluid-fluid) triple contact line, two equations are obtained, which represent: (i) the equilibrium of the forces (surface stresses) for a triple line fixed on the body; (ii) the equilibrium relative to the motion of the line with respect to the body. This last equation leads to a strong modification of Young's classical capillary equation.

  1. Adiabatic density surface, neutral density surface, potential density surface, and mixing path

    Institute of Scientific and Technical Information of China (English)

    HUANG Rui-xin

    2014-01-01

    In this paper, adiabatic density surface, neutral density surface and potential density surface are compared. The adiabatic density surface is defined as the surface on which a water parcellcan move adiabatically, without changing its potential temperature and salinity. For a water parcelltaken at a given station and pressure level, the corresponding adiabatic density surface can be determined through simple calculations. This family of surface is neutrally buoyant in the world ocean, and different from other surfaces that are not truly neutrally buoyant. In order to explore mixing path in the ocean, a mixing ratio m is introduced, which is defined as the portion of potential temperature and salinity of a water parcellthat has exchanged with the environment during a segment of migration in the ocean. Two extreme situations of mixing path in the ocean are m=0 (no mixing), which is represented by the adiabatic density curve, and m=1, where the original information is completely lost through mixing. The latter is represented by the neutral density curve. The reality lies in between, namely, 0

  2. Modeling surface imperfections in thin films and nanostructured surfaces

    DEFF Research Database (Denmark)

    Hansen, Poul-Erik; Madsen, J. S.; Jensen, S. A.

    2017-01-01

    Accurate scatterometry and ellipsometry characterization of non-perfect thin films and nanostructured surfaces are challenging. Imperfections like surface roughness make the associated modelling and inverse problem solution difficult due to the lack of knowledge about the imperfection on the surf......Accurate scatterometry and ellipsometry characterization of non-perfect thin films and nanostructured surfaces are challenging. Imperfections like surface roughness make the associated modelling and inverse problem solution difficult due to the lack of knowledge about the imperfection...... classes of imperfections are examined. The imperfections are introduced as periodic structures with a super cell periods ten times larger than the simple grating period. Two classes of imperfections concern the grating and one class concern the substrate. It is shown that imperfections of a few nanometers...

  3. Prevention of hair surface aging.

    Science.gov (United States)

    Wiesche, Erik Schulze Zur; Körner, Andrea; Schäfer, Karola; Wortmann, Franz-Josef

    2011-01-01

    The hydrophobic character of the surface of human hair is particularly attributed to the lipid components of the epicuticle and to a layer of covalently bound fatty acids. This outer f-layer mainly consists of 18-methyl eicosanoic acid (18-MEA), which is covalently bound to the underlying protein matrix, forming the epicuticle as composite surface structure. Daily weathering and chemical treatments, specifically oxidative bleaching, decrease the hydrophobicity of the outer hair surface drastically.Multiple daily stress, simulated by an automatic test device including shampooing, blow drying and sun light exposure, changed the lipid composition of hair significantly. A marked loss of 18-MEA was observed. Decreasing contact angles are the direct consequence. A new method to determine the "pseudo-static" contact angle on hair was developed. The results correlate with the corresponding data obtained by dynamic contact angle measurements according to Wilhelmy. Besides that, the resorption time of water droplets by the hair surface provides additional information about the intactness of the outer f-layer.Specific proteolipids, which are lipid-modified keratins, are able to reconstruct the surface layer of damaged hair by creating renewed surface hydrophobicity and extending the water resorption time by the hair surface.

  4. Bioactive Surface Modification of Hydroxyapatite

    Directory of Open Access Journals (Sweden)

    Yasuhiko Abe

    2013-01-01

    Full Text Available The purpose of this study was to establish an acid-etching procedure for altering the Ca/P ratio of the nanostructured surface of hydroxyapatite (HAP by using surface chemical and morphological analyses (XPS, XRD, SEM, surface roughness, and wettability and to evaluate the in vitro response of osteoblast-like cells (MC3T3-E1 cells to the modified surfaces. This study utilized HAP and HAP treated with 10%, 20%, 30%, 40%, 50%, or 60% phosphoric acid solution for 10 minutes at 25°C, followed by rinsing 3 times with ultrapure water. The 30% phosphoric acid etching process that provided a Ca/P ratio of 1.50, without destruction of the grain boundary of HAP, was selected as a surface-modification procedure. Additionally, HAP treated by the 30% phosphoric acid etching process was stored under dry conditions at 25°C for 12 hours, and the Ca/P ratio approximated to 1.00 accidentally. The initial adhesion, proliferation, and differentiation (alkaline phosphatase (ALP activity and relative mRNA level for ALP of MC3T3-E1 cells on the modified surfaces were significantly promoted (P<0.05 and 0.01. These findings show that the 30% phosphoric acid etching process for the nanostructured HAP surface can alter the Ca/P ratio effectively and may accelerate the initial adhesion, proliferation, and differentiation of MC3T3-E1 cells.

  5. EFFECT OF SURFACE TREATMENT ON ENAMEL SURFACE ROUGHNESS

    Directory of Open Access Journals (Sweden)

    Şeyda Erşahan

    2016-01-01

    Full Text Available Purpose: To compare the effects of different methods of surface treatment on enamel roughness. Materials and Methods: Ninety human maxillary first premolars were randomly divided into three groups (n=30 according to type of enamel surface treatment: I, acid etching; II, Er:YAG laser; III, Nd:YAG laser. The surface roughness of enamel was measured with a noncontact optical profilometer. For each enamel sample, two readings were taken across the sample—before enamel surface treatment (T1 and after enamel surface treatment (T2. The roughness parameter analyzed was the average roughness (Ra. Statistical analysis was performed using a Paired sample t test and the post-hoc Mann- Whitney U test, with the significance level set at 0.05. Results: The highest Ra (average roughness values were observed for Group II, with a significant difference with Groups I and III (P<0.001. Ra values for the acid etching group (Group I were significantly lower than other groups (P<0.001. Conclusion: Surface treatment of enamel with Er:YAG laser and Nd:YAG laser results in significantly higher Ra than acid-etching. Both Er:YAG laser or Nd:YAG laser can be recommended as viable treatment alternatives to acid etching.

  6. Surface wrinkling on polydimethylsiloxane microspheres via wet surface chemical oxidation.

    Science.gov (United States)

    Yin, Jian; Han, Xue; Cao, Yanping; Lu, Conghua

    2014-07-16

    Here we introduce a simple low-cost yet robust method to realize spontaneously wrinkled morphologies on spherical surfaces. It is based on surface chemical oxidation of aqueous-phase-synthesized polydimethylsiloxane (PDMS) microspheres in the mixed H2SO4/HNO3/H2O solution. Consequently, curvature and overstress-sensitive wrinkles including dimples and labyrinth patterns are successfully induced on the resulting oxidized PDMS microspheres. A power-law dependence of the wrinkling wavelength on the microsphere radius exists. The effects of experimental parameters on these tunable spherical wrinkles have been systematically investigated, when the microspheres are pre-deposited on a substrate. These parameters include the radius and modulus of microspheres, the mixed acid solution composition, the oxidation duration, and the water washing post-treatment. Meanwhile, the complicated chemical oxidation process has also been well studied by in-situ optical observation via the microsphere system, which represents an intractable issue in a planar system. Furthermore, we realize surface wrinkled topographies on the whole microspheres at a large scale, when microspheres are directly dispersed in the mixed acid solution for surface oxidation. These results indicate that the introduced wet surface chemical oxidation has the great potential to apply to other complicated curved surfaces for large-scale generation of well-defined wrinkling patterns, which endow the solids with desired physical properties.

  7. Preparation of stable silica surfaces for surface forces measurement

    Science.gov (United States)

    Ren, Huai-Yin; Mizukami, Masashi; Kurihara, Kazue

    2017-09-01

    A surface forces apparatus (SFA) measures the forces between two surfaces as a function of the surface separation distance. It is regarded as an essential tool for studying the interactions between two surfaces. However, sample surfaces used for the conventional SFA measurements have been mostly limited to thin (ca. 2-3 μm) micas, which are coated with silver layers (ca. 50 nm) on their back, due to the requirement of the distance determination by transmission mode optical interferometry called FECO (fringes of equal chromatic order). The FECO method has the advantage of determining the absolute distance, so it should be important to increase the availability of samples other than mica, which is chemically nonreactive and also requires significant efforts for cleaving. Recently, silica sheets have been occasionally used in place of mica, which increases the possibility of surface modification. However, in this case, the silver layer side of the sheet is glued on a cylindrical quartz disc using epoxy resin, which is not stable in organic solvents and can be easily swollen or dissolved. The preparation of substrates more stable under severe conditions, such as in organic solvents, is necessary for extending application of the measurement. In this study, we report an easy method for preparing stable silica layers of ca. 2 μm in thickness deposited on gold layers (41 nm)/silica discs by sputtering, then annealed to enhance the stability. The obtained silica layers were stable and showed no swelling in organic solvents such as ethanol and toluene.

  8. Optical Isolator Utilizing Surface Plasmons

    Directory of Open Access Journals (Sweden)

    Shinji Yuasa

    2012-05-01

    Full Text Available Feasibility of usage of surface plasmons in a new design of an integrated optical isolator has been studied. In the case of surface plasmons propagating at a boundary between a transition metal and a double-layer dielectric, there is a significant difference of optical loss for surface plasmons propagating in opposite directions. Utilizing this structure, it is feasible to fabricate a competitive plasmonic isolator, which benefits from a broad wavelength operational bandwidth and a good technological compatibility for integration into the Photonic Integrated Circuits (PIC. The linear dispersion relation was derived for plasmons propagating in a multilayer magneto-optical slab.

  9. Surface wrinkling on polydopamine film

    Science.gov (United States)

    Meng, Jieyun; Xie, Jixun; Han, Xue; Lu, Conghua

    2016-05-01

    In this paper, we report a non-lithographic strategy to realize surface patterns on polydopamine films. It is based on surface wrinkling, which is induced on polydopamine (PDA) films that are grown on uniaxially pre-strained polydimethylsiloxane (PDMS) substrates through self-polymerization of dopamine, followed by the pre-strain release. We investigate the influences of the experimental conditions including polymerization time, prestrain and the dopamine solution concentration on the wrinkling patterns. Furthermore, we take advantage of the reducibility of PDA to fabricate silver nanoparticle-deposited PDA films with surface-wrinkled patterns, which may have potential applications in the related fields.

  10. Reconstructing NURBS Surface with Features

    Institute of Scientific and Technical Information of China (English)

    SUN Chunhua

    2006-01-01

    The method of reconstructing NURBS surface with features is proposed in this paper. Features including boundary curves and feature points are recognized from the scanned data. An initial surface is constructed with boundary curves. The desired NURBS is determined by modifying the initial surface to pass through feature points. Lagrange multiplier is used to find the solution. The error analysis is then done. Examples are given to verify the algorithm at last. The method can keep some features fixed and be widely used in CAD modeling.

  11. Global Analysis of Minimal Surfaces

    CERN Document Server

    Dierkes, Ulrich; Tromba, Anthony J

    2010-01-01

    Many properties of minimal surfaces are of a global nature, and this is already true for the results treated in the first two volumes of the treatise. Part I of the present book can be viewed as an extension of these results. For instance, the first two chapters deal with existence, regularity and uniqueness theorems for minimal surfaces with partially free boundaries. Here one of the main features is the possibility of 'edge-crawling' along free parts of the boundary. The third chapter deals with a priori estimates for minimal surfaces in higher dimensions and for minimizers of singular integ

  12. Undergraduate Laboratory for Surface Science

    Science.gov (United States)

    Okumura, Mitchio; Beauchamp, Jesse L.; Dickert, Jeffrey M.; Essy, Blair R.; Claypool, Christopher L.

    1996-02-01

    Surface science has developed into a multidisciplinary field of research with applications ranging from heterogeneous catalysis to semiconductor etching (1). Aspects of surface chemistry are now included in physical chemistry textbooks (2) and undergraduate curricula (3), but the perceived cost and complexity of equipment has deterred the introduction of surface science methods in undergraduate laboratories (4). Efforts to expose chemistry undergraduates to state-of-the-art surface instrumentation have just begun (5). To provide our undergraduates with hands-on experience in using standard techniques for characterizing surface morphology, adsorbates, kinetics, and reaction mechanisms, we have developed a set of surface science experiments for our physical chemistry laboratory sequence. The centerpiece of the laboratory is an ultrahigh vacuum (UHV) chamber for studies of single crystal surfaces. This instrument, shown in the figure, has surface analysis capabilities including low energy electron diffraction (LEED), Auger spectroscopy, and temperature-programmed desorption (TPD). The laboratory exercises involve experiments on the well-studied Pt(111) surface. Students prepare a previously mounted single crystal sample by sputtering it with an argon ion gun and heating it under O2. Electron diffraction patterns from the cleaned surface are then obtained with a reverse view LEED apparatus (Princeton Instruments). Images are captured by a charge-coupled device (CCD) camera interfaced to a personal computer for easy downloading and subsequent analysis. Although the LEED images from a Pt(111) surface can be readily interpreted using simple diffraction arguments, this lab provides an excellent context for introducing Miller indices and reciprocal lattices (6). The surface chemical composition can be investigated by Auger spectroscopy, using the LEED apparatus as a simple energy analyzer. The temperature programmed desorption experiment, which is nearly complete, will be

  13. Surface analysis the principal techniques

    CERN Document Server

    Vickerman, John C

    2009-01-01

    This completely updated and revised second edition of Surface Analysis: The Principal Techniques, deals with the characterisation and understanding of the outer layers of substrates, how they react, look and function which are all of interest to surface scientists. Within this comprehensive text, experts in each analysis area introduce the theory and practice of the principal techniques that have shown themselves to be effective in both basic research and in applied surface analysis. Examples of analysis are provided to facilitate the understanding of this topic and to show readers how they c

  14. Nanobubble trouble on gold surfaces

    DEFF Research Database (Denmark)

    Holmberg, Maria; Kuhle, A.; Garnaes, J.

    2003-01-01

    When analyzing surfaces related to biosensors with in situ atomic force microscopy (AFM), the existence of nanobubbles called for our attention. The bubbles seem to form spontaneously when gold surfaces are immersed in clean water and are probably a general phenomenon at water-solid interfaces....... Besides from giving rise to undesired effects in, for example, biosensors, nanobubbles can also cause artifacts in AFM imaging. We have observed nanobubbles on unmodified gold surfaces, immersed in clean water, using standard silicon AFM probes. Nanobubbles can be made to disappear from contact mode AFM...

  15. Surface glycosylation of polymeric membranes

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Surface glycosylation of polymeric membranes has been inspired by the structure of natural biomem-branes. It refers to that glycosyl groups are introduced onto the membrane surface by various strate-gies, which combine the separation function of the membrane with the biological function of the sac-charides in one system. In this review, progress in the surface glycosylation of polymeric membranes is highlighted in two aspects, i.e. the glycosylation methods and the potential applications of the sur-face-glycosylated membranes.

  16. Stable discrete surface light bullets.

    Science.gov (United States)

    Mihalache, Dumitru; Mazilu, Dumitru; Lederer, Falk; Kivshar, Yuri S

    2007-01-22

    We analyze spatiotemporal light localization near the edge of a semi-infinite array of weakly coupled nonlinear optical waveguides and demonstrate the existence of a novel class of continuous-discrete spatiotemporal solitons, the so-called discrete surface light bullets. We show that their properties are strongly affected by the presence of the surface. To this end the crossover between surface and quasi-bulk bullets is studied by analyzing the families of solitons propagating at different distances from the edge of the waveguide array.

  17. OW CCMP ocean surface wind

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Cross-Calibrated Multi-Platform (CCMP) Ocean Surface Wind Vector Analyses (Atlas et al., 2011) provide a consistent, gap-free long-term time-series of ocean...

  18. Modelling land surface - atmosphere interactions

    DEFF Research Database (Denmark)

    Rasmussen, Søren Højmark

    related to inaccurate land surface modelling, e.g. enhanced warm bias in warm dry summer months. Coupling the regional climate model to a hydrological model shows the potential of improving the surface flux simulations in dry periods and the 2 m air temperature in general. In the dry periods......The study is investigates modelling of land surface – atmosphere interactions in context of fully coupled climatehydrological model. With a special focus of under what condition a fully coupled model system is needed. Regional climate model inter-comparison projects as ENSEMBLES have shown bias...... representation of groundwater in the hydrological model is found to important and this imply resolving the small river valleys. Because, the important shallow groundwater is found in the river valleys. If the model does not represent the shallow groundwater then the area mean surface flux calculation...

  19. Total Phosphorus in Surface Water

    Data.gov (United States)

    U.S. Environmental Protection Agency — Excess phosphorus in surface water can result in eutrophication. TOTALP is reported in kilograms/hectare/year. More information about these resources, including the...

  20. Machining of Complex Sculptured Surfaces

    CERN Document Server

    2012-01-01

    The machining of complex sculptured surfaces is a global technological topic in modern manufacturing with relevance in both industrialized and emerging in countries particularly within the moulds and dies sector whose applications include highly technological industries such as the automotive and aircraft industry. Machining of Complex Sculptured Surfaces considers new approaches to the manufacture of moulds and dies within these industries. The traditional technology employed in the manufacture of moulds and dies combined conventional milling and electro-discharge machining (EDM) but this has been replaced with  high-speed milling (HSM) which has been applied in roughing, semi-finishing and finishing of moulds and dies with great success. Machining of Complex Sculptured Surfaces provides recent information on machining of complex sculptured surfaces including modern CAM systems and process planning for three and five axis machining as well as explanations of the advantages of HSM over traditional methods ra...

  1. Sustaining dry surfaces under water

    DEFF Research Database (Denmark)

    Jones, Paul R.; Hao, Xiuqing; Cruz-Chu, Eduardo R.

    2015-01-01

    Rough surfaces immersed under water remain practically dry if the liquid-solid contact is on roughness peaks, while the roughness valleys are filled with gas. Mechanisms that prevent water from invading the valleys are well studied. However, to remain practically dry under water, additional...... mechanisms need consideration. This is because trapped gas (e.g. air) in the roughness valleys can dissolve into the water pool, leading to invasion. Additionally, water vapor can also occupy the roughness valleys of immersed surfaces. If water vapor condenses, that too leads to invasion. These effects have...... not been investigated, and are critically important to maintain surfaces dry under water.In this work, we identify the critical roughness scale, below which it is possible to sustain the vapor phase of water and/or trapped gases in roughness valleys – thus keeping the immersed surface dry. Theoretical...

  2. Total Nitrogen in Surface Water

    Data.gov (United States)

    U.S. Environmental Protection Agency — Excess nitrogen in surface water can result in eutrophication. TOTALN is reported in kilograms/hectare/year. More information about these resources, including the...

  3. Thin film surface reconstruction analysis

    Energy Technology Data Exchange (ETDEWEB)

    Imperatori, P. [CNR, Monterotondo Stazione, Rome (Italy). Istituto di Chimica dei materiali

    1996-09-01

    The study of the atomic structure of surfaces and interfaces is a fundamental step in the knowledge and the development of new materials. Among the several surface-sensitive techniques employed to characterise the atomic arrangements, grazing incidence x-ray diffraction (GIXD) is one of the most powerful. With a simple data treatment, based on the kinematical theory, and using the classical methods of x-ray bulk structure determination, it gives the atomic positions of atoms at a surface or an interface and the atomic displacements of subsurface layers for a complete determination of the structure. In this paper the main features of the technique will be briefly reviewed and selected of application to semiconductor and metal surfaces will be discussed.

  4. Free Surface Water Tunnel (FSWT)

    Data.gov (United States)

    Federal Laboratory Consortium — Description: The Free Surface Water Tunnel consists of the intake plenum, the test section and the exit plenum. The intake plenum starts with a perforated pipe that...

  5. Random walk near the surface

    Science.gov (United States)

    Korneta, W.; Pytel, Z.

    1988-07-01

    The random walk of a particle on a three-dimensional semi-infinite lattice is considered. In order to study the effect of the surface on the random walk, it is assumed that the velocity of the particle depends on the distance to the surface. Moreover it is assumed that at any point the particle may be absorbed with a certain probability. The probability of the return of the particle to the starting point and the average time of eventual return are calculated. The dependence of these quantities on the distance to the surface, the probability of absorption and the properties of the surface is discussed. The method of generating functions is used.

  6. Near-surface applied geophysics

    CERN Document Server

    Everett, Mark E.

    2013-01-01

    Just a few meters below the Earth's surface lie features of great importance, from geological faults which can produce devastating earthquakes, to lost archaeological treasures! This refreshing, up-to-date book explores the foundations of interpretation theory and the latest developments in near-surface techniques, used to complement traditional geophysical methods for deep-exploration targets. Clear but rigorous, the book explains theory and practice in simple physical terms, supported by intermediate-level mathematics. Techniques covered include magnetics, resistivity, seismic reflection and refraction, surface waves, induced polarization, self-potential, electromagnetic induction, ground-penetrating radar, magnetic resonance, interferometry, seismoelectric and more. Sections on data analysis and inverse theory are provided and chapters are illustrated by case studies, giving students and professionals the tools to plan, conduct and analyze a near-surface geophysical survey. This is an important textbook fo...

  7. Gap Surface Plasmon Waveguide Analysis

    DEFF Research Database (Denmark)

    Nielsen, Michael Grøndahl; Bozhevolnyi, Sergey I.

    2014-01-01

    Plasmonic waveguides supporting gap surface plasmons (GSPs) localized in a dielectric spacer between metal films are investigated numerically and the waveguiding properties at telecommunication wavelengths are presented. Especially, we emphasize that the mode confinement can advantageously...

  8. Dispersion engineering of surface plasmons.

    Science.gov (United States)

    Mandel, Isroel M; Bendoym, Igor; Jung, Young U; Golovin, Andrii B; Crouse, David T

    2013-12-30

    In this work, it is shown how the shapes of surface plasmon dispersion curves can be engineered by manipulating the distribution of the electromagnetic fields in multilayer structures, which themselves are controlled by the free electron density in metal-like materials, such as doped semiconductors in the THz spectral range. By having a nonuniform free electron density profile, reduced relative to that in typical bulk metals, the electromagnetic fields of surface plasmons are distributed in different metallic materials that have different complex dielectric permittivities. As the in-plane component of surface plasmon's wave-vector increases, they become more confined to a particular layer of the multilayer structure and have energies that are predictable by considering the permittivity of the layer in which the fields are most concentrated. Unusual and arbitrary shapes of surface plasmon dispersion curves can be designed, including stair steps and dovetails shapes.

  9. Sustaining dry surfaces under water

    Science.gov (United States)

    Jones, Paul R.; Hao, Xiuqing; Cruz-Chu, Eduardo R.; Rykaczewski, Konrad; Nandy, Krishanu; Schutzius, Thomas M.; Varanasi, Kripa K.; Megaridis, Constantine M.; Walther, Jens H.; Koumoutsakos, Petros; Espinosa, Horacio D.; Patankar, Neelesh A.

    2015-08-01

    Rough surfaces immersed under water remain practically dry if the liquid-solid contact is on roughness peaks, while the roughness valleys are filled with gas. Mechanisms that prevent water from invading the valleys are well studied. However, to remain practically dry under water, additional mechanisms need consideration. This is because trapped gas (e.g. air) in the roughness valleys can dissolve into the water pool, leading to invasion. Additionally, water vapor can also occupy the roughness valleys of immersed surfaces. If water vapor condenses, that too leads to invasion. These effects have not been investigated, and are critically important to maintain surfaces dry under water. In this work, we identify the critical roughness scale, below which it is possible to sustain the vapor phase of water and/or trapped gases in roughness valleys - thus keeping the immersed surface dry. Theoretical predictions are consistent with molecular dynamics simulations and experiments.

  10. Surface Sensitive Microfluidic Optomechanical Sensors

    CERN Document Server

    Kim, Kyu Hyun

    2014-01-01

    The microfluidic optomechanical resonator (uFOMR) based on a thin-walled glass capillary supports high Q-factor (>1000) mechanical modes in the presence of liquids. In this Letter, the sensitivity of the uFOMR to the surface change is studied by layer-by-layer removal of SiO2 molecules from the uFOMR inner surface using various concentrations of hydrofluoric acid solutions. A frequency downshift is observed with a sensitivity of 1.2 Hz/(pg/mm2), which translates to a surface density detection limit of 83 pg/mm2. This work opens a door to using the optomechanical mode for detection and characterization of molecules present near the resonator surface.

  11. Surface Modification for Microreactor Fabrication

    Directory of Open Access Journals (Sweden)

    Wladyslaw Torbicz

    2006-04-01

    Full Text Available In this paper, methods of surface modification of different supports, i.e. glass andpolymeric beads for enzyme immobilisation are described. The developed method ofenzyme immobilisation is based on Schiff’s base formation between the amino groups onthe enzyme surface and the aldehyde groups on the chemically modified surface of thesupports. The surface of silicon modified by APTS and GOPS with immobilised enzymewas characterised by atomic force microscopy (AFM, time-of-flight secondary ion massspectroscopy (ToF-SIMS and infrared spectroscopy (FTIR. The supports withimmobilised enzyme (urease were also tested in combination with microreactors fabricatedin silicon and Perspex, operating in a flow-through system. For microreactors filled withurease immobilised on glass beads (Sigma and on polymeric beads (PAN, a very high andstable signal (pH change was obtained. The developed method of urease immobilisationcan be stated to be very effective.

  12. Visual perception of surface wrinkles.

    Science.gov (United States)

    Fan, Jintu; Liu, Fu

    2005-12-01

    To study the relationship between visual perception of magnitude of wrinkles and geometrical parameters of surfaces, four potentially relevant parameters of the surface profile were considered: the variance (sigma2), the cutting frequency (Fc), the effective disparity curvature (Dce) of the wrinkled surface over the eyeball distance of the observer, and the frequency component of the disparity curvature (Dcf). Analysis of garment seams with varying amount of pucker showed that, while the logarithm for each of these four parameters has a strong linear relationship with the visually perceived magnitude of wrinkles, following the Fechner Law, the effective disparity curvature (Dce) and the frequency component of the disparity curvature (Dcf) with visual perception appeared stronger. This modeling may be an objective method for measuring magnitude of surface wrinkles.

  13. Mirador - Earth Surface and Interior

    Data.gov (United States)

    National Aeronautics and Space Administration — Earth Science data access made simple. The goal of the Earth Surface and Interior focus area is to assess, mitigate and forecast the natural hazards that affect...

  14. Causal Dynamics of Discrete Surfaces

    Directory of Open Access Journals (Sweden)

    Pablo Arrighi

    2014-03-01

    Full Text Available We formalize the intuitive idea of a labelled discrete surface which evolves in time, subject to two natural constraints: the evolution does not propagate information too fast; and it acts everywhere the same.

  15. Trivalent expanders and hyperbolic surfaces

    CERN Document Server

    Ivrissimtzis, Ioannis; Vdovina, Alina

    2012-01-01

    We introduce a family of trivalent expanders which tessellate compact hyperbolic surfaces with large isometry groups. We compare this family with Platonic graphs and modifications of them and prove topological and spectral properties of these families.

  16. Surface Reactivity of Quasicrystalline Materials

    Science.gov (United States)

    Jenks, Cynthia J.

    1997-03-01

    A fundamental knowledge and understanding of the reactivity of quasicrystalline materials is of great interest because of certain practical properties these materials possess, namely low coefficients of friction and oxidation resistance. A recent "hierarchical cluster" model proposed by Janot(C. Janot Phys. Rev. B 56 (1996) 181.) predicts that quasicrystal surfaces should be intrinsically inert and rough, and is useful in explaining their interesting properties. Surface structure and preparation may play a role in the applicability of this model. In this talk, we examine these factors and present experimental measurements of the surface reactivity of some Al-based quasicrystalline materials under ultra-high vacuum conditions (less than 2 x 10-10 Torr). To gain an understanding of what properties are unique to quasicrystals, we make comparisons with the surface reactivity of crystalline alloys of similar composition and pure, crystalline aluminum. note number.

  17. The spectrum of hyperbolic surfaces

    CERN Document Server

    Bergeron, Nicolas

    2016-01-01

    This text is an introduction to the spectral theory of the Laplacian on compact or finite area hyperbolic surfaces. For some of these surfaces, called “arithmetic hyperbolic surfaces”, the eigenfunctions are of arithmetic nature, and one may use analytic tools as well as powerful methods in number theory to study them. After an introduction to the hyperbolic geometry of surfaces, with a special emphasis on those of arithmetic type, and then an introduction to spectral analytic methods on the Laplace operator on these surfaces, the author develops the analogy between geometry (closed geodesics) and arithmetic (prime numbers) in proving the Selberg trace formula. Along with important number theoretic applications, the author exhibits applications of these tools to the spectral statistics of the Laplacian and the quantum unique ergodicity property. The latter refers to the arithmetic quantum unique ergodicity theorem, recently proved by Elon Lindenstrauss. The fruit of several graduate level courses at Orsay...

  18. Surface Meteorology and Solar Energy

    Data.gov (United States)

    National Aeronautics and Space Administration — Surface Meteorology and Solar Energy data - over 200 satellite-derived meteorology and solar energy parameters, monthly averaged from 22 years of data, global solar...

  19. EUROMET SUPPLEMENTARY COMPARISON - SURFACE TEXTURE

    DEFF Research Database (Denmark)

    Koenders, L.; Andreasen, Jan Lasson; De Chiffre, Leonardo

    At the length meeting in Prague in Oct. 1999 a new comparison was suggested on surface texture. The last comparison on this field was finished in 1989. In the meantime the instrumentation, the standards and the written standards have been improved including some software filters. The pilot...... laboratories for this supplementary comparison on surface texture are the Centre for Geometrical Metrology at the Technical University of Denmark and the Micro- and Nanotopography laboratory at the Physikalisch-Technische Bundesanstalt, Germany....

  20. Ocular Surface Reconstruction: Recent Innovations

    OpenAIRE

    Madhavan HN

    2009-01-01

    The ocular surface is exceptionally rich in complexity and functionality. Severe ocular surface disorders/conditions, such as chemical or thermal injuries, Stevens-Johnson syndrome (SJS), ocular cicatricial pemphigoid, neurotrophic keratopathy, chronic limbitis, and severe microbial keratitis cause significant morbidities and even corneal blindness. Hypofunction may be caused by Aniridia, Neurotrophy, Endocrine, Pterygium and Chronic limbitis Approximately 6000 patients are seen in Ocular Sur...

  1. High-Luminance Road Surfaces,

    Science.gov (United States)

    1980-12-01

    condition was changed with the decreased use of snow chains and increasing use of studded tires. The studded tires wear down the road surface in a...region, white anorthosite of a uniform and unweathered type is usable as an additive to asphalt con- crete and wear surfacing for asphalt gravel...CLASSIFICATION Of THIS PAGE(W/em Daateoo 20. Abstract (cont’d) resistance to weathering, and the degree of luminosity. Quartzites have the best wear

  2. Enhanced Backscattering from Rough Surfaces

    Science.gov (United States)

    1992-12-01

    under Referee ..................... 12 3.4 Papers Presented at Professional Conferences ................... 12 4.0 LIST OF ALL PARTICIPATING SCIENTIFIC...60 -30 0 30 60 90 Scattering Angle (deg) Figure 2 (b). The DRC for the Perfectly Conducting Surface whose Profile is shown in Figure 2 (a) when the...Randomly Rough Surfaces", accepted for publication in Applied Optics (1993). I 3.3 Papers Submitted to Journal under Referee 19. E.R. Mendez, H.M

  3. Bacterial motility on abiotic surfaces

    OpenAIRE

    Gibiansky, Maxsim

    2013-01-01

    Bacterial biofilms are structured microbial communities which are widespread both in nature and in clinical settings. When organized into a biofilm, bacteria are extremely resistant to many forms of stress, including a greatly heightened antibiotic resistance. In the early stages of biofilm formation on an abiotic surface, many bacteria make use of their motility to explore the surface, finding areas of high nutrition or other bacteria to form microcolonies. They use motility appendages, incl...

  4. SURFACE MELTING OF ALUMINIUM ALLOYS

    OpenAIRE

    Veit, S.; Albert, D; Mergen, R.

    1987-01-01

    The wear properties of aluminium base alloys are relatively poor. Laser surface melting and alloying has proved successful in many alloy systems as a means of significantly improving the surface properties. The present work describes experiments designed to establish the scope of laser treatment of aluminium alloys. Aluminium does not absorb CO2 laser light as well as other metals which necessitated first a general study of absorption caotings. Aluminium alloys offer fewer opportunities than ...

  5. Film boiling on vertical surfaces.

    Science.gov (United States)

    Suryanarayana, N. V.; Merte, H., Jr.

    1972-01-01

    Film boiling of a saturated liquid on a vertical surface is analyzed to determine the local heat-transfer rates as a function of height and heater-surface superheat. Experiments show that the laminar-flow model is inadequate. A turbulent-vapor-flow model is used, and the influence of the interfacial oscillations is incorporated on a semiempirical basis. Measurements of local film boiling were obtained with a transient technique using saturated liquid nitrogen.

  6. DETERMINATION OF RADIATOR COOLING SURFACE

    Directory of Open Access Journals (Sweden)

    A. I. Yakubovich

    2009-01-01

    Full Text Available The paper proposes a methodology for calculation of a radiator cooling surface with due account of heat transfer non-uniformity on depth of its core. Calculation of radiator cooling surfaces of «Belarus-1221» and «Belarus-3022» tractors has been carried out in the paper. The paper also advances standard size series of radiators for powerful «Belarus» tractor type.

  7. Laser surface modification and adhesion

    CERN Document Server

    Mittal, K L

    2014-01-01

    The book provides a unique overview on laser techniques and applications for the purpose of improving adhesion by altering surface chemistry and topography/morphology of the substrate. It details laser surface modification techniques for a wide range of industrially relevant materials (plastics, metals, ceramics, composites) with the aim to improve and enhance their adhesion to other materials. The joining of different materials is of critical importance in the fabrication of many and varied products.

  8. Droplet impacts upon liquid surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Ching, B.; Golay, M.W.; Johnson, T.J.

    1984-11-02

    The absorption and rebounding of single droplets and streams of droplets (of diameter less than 1200 micrometers) impacting upon the surface of a deep liquid were examined experimentally. Conservation of mechanical energy and momentum were used to explain rebounding droplet interactions, and impaction criteria have been established regarding the absorption of droplet streams. Surface tension is the dominant mechanism governing the observed behavior. Single droplets were never observed to rebound.

  9. Corrosion-resistant metal surfaces

    Science.gov (United States)

    Sugama, Toshifumi [Wading River, NY

    2009-03-24

    The present invention relates to metal surfaces having thereon an ultrathin (e.g., less than ten nanometer thickness) corrosion-resistant film, thereby rendering the metal surfaces corrosion-resistant. The corrosion-resistant film includes an at least partially crosslinked amido-functionalized silanol component in combination with rare-earth metal oxide nanoparticles. The invention also relates to methods for producing such corrosion-resistant films.

  10. Radioactive Ions for Surface Characterization

    CERN Multimedia

    2002-01-01

    The collaboration has completed a set of pilot experiments with the aim to develop techniques for using radioactive nuclei in surface physics. The first result was a method for thermal deposition of isolated atoms (Cd, In, Rb) on clean metallic surfaces. \\\\ \\\\ Then the diffusion history of deposited Cd and In atoms on two model surfaces, Mo(110) and Pd(111), was followed through the electric field gradients (efg) acting at the probe nuclei as measured with the Perturbed Angular Correlation technique. For Mo(110) a rather simple history of the adatoms was inferred from the experiments: Atoms initially landing at terrace sites diffuse from there to ledges and then to kinks, defects always present at real surfaces. The next stage is desorption from the surface. For Pd a scenario that goes still further was found. Following the kink stage the adatoms get incorporated into ledges and finally into the top surface layer. For all these five sites the efg's could be measured.\\\\ \\\\ In preparation for a further series o...

  11. Surface physics of semiconducting nanowires

    Science.gov (United States)

    Amato, Michele; Rurali, Riccardo

    2016-02-01

    Semiconducting nanowires (NWs) are firm candidates for novel nanoelectronic devices and a fruitful playground for fundamental physics. Ultra-thin nanowires, with diameters below 10 nm, present exotic quantum effects due to the confinement of the wave functions, e.g. widening of the electronic band-gap, deepening of the dopant states. However, although several reports of sub-10 nm wires exist to date, the most common NWs have diameters that range from 20 to 200 nm, where these quantum effects are absent or play a very minor role. Yet, the research activity on this field is very intense and these materials still promise to provide an important paradigm shift for the design of emerging electronic devices and different kinds of applications. A legitimate question is then: what makes a nanowire different from bulk systems? The answer is certainly the large surface-to-volume ratio. In this article we discuss the most salient features of surface physics and chemistry in group-IV semiconducting nanowires, focusing mostly on Si NWs. First we review the state-of-the-art of NW growth to achieve a smooth and controlled surface morphology. Next we discuss the importance of a proper surface passivation and its role on the NW electronic properties. Finally, stressing the importance of a large surface-to-volume ratio and emphasizing the fact that in a NW the surface is where most of the action takes place, we discuss molecular sensing and molecular doping.

  12. Active Free Surface Density Maps

    Science.gov (United States)

    Çelen, S.

    2016-10-01

    Percolation problems were occupied to many physical problems after their establishment in 1957 by Broadbent and Hammersley. They can be used to solve complex systems such as bone remodeling. Volume fraction method was adopted to set some algorithms in the literature. However, different rate of osteoporosis could be observed for different microstructures which have the same mass density, mechanical stimuli, hormonal stimuli and nutrition. Thus it was emphasized that the bone might have identical porosity with different specific surfaces. Active free surface density of bone refers the used total area for its effective free surface. The purpose of this manuscript is to consolidate a mathematical approach which can be called as “active free surface density maps” for different surface patterns and derive their formulations. Active free surface density ratios were calculated for different Archimedean lattice models according to Helmholtz free energy and they were compared with their site and bond percolation thresholds from the background studies to derive their potential probability for bone remodeling.

  13. HONO emissions from snow surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Beine, Harry; Colussi, AgustIn J; Hoffmann, Michael R [California Institute of Technology, Environmental Science and Engineering, Pasadena, CA (United States); Amoroso, Antonio; Esposito, Giulio; Montagnoli, Mauro [Consiglio Nazionale delle Ricerche-Istituto Inquinamento Atmosferico (CNR-IIA), Roma (Italy)], E-mail: hbeine@ucdavis.edu

    2008-10-15

    Photochemical production of NO{sub x} and HONO from surface snow can significantly impact the NO{sub x}, OH, and O{sub 3} budgets in the overlying atmosphere. NO{sub x} production is driven by the solar photolysis of NO{sub 3}{sup -} within or at the surface of snowpacks. HONO, however, is a secondary species that involves H-atom transfer between natural donors and photogenerated NO{sub 2}. Here we investigate the mechanism of HONO generation in snowpacks by exploring how its emissions respond to on-and-off illumination and temperature cycles, and to the addition of various snow dopants. The presence of humic substances within or at the surface of the snowpack significantly enhances, and may be an essential requisite for HONO production. Emission fluxes of NO, NO{sub 2}, and HONO from snow surfaces were measured under controlled temperature, ozone mixing ratio and actinic flux conditions. We used natural mid-latitude surface snow as the snow substrate. Their combined peak emission fluxes reached up to {approx}3 x 10{sup 10} molecules cm{sup -2} s{sup -1}, {approx}10{sup 3} times larger than typical emissions from polar snowpacks. Less than 1% of available N was released in these experiments. We report significant post-irradiation HONO emissions from the snow. Present results indicate a strong, direct correlation between HONO emissions and the HULIS (humic-like substances) content of the snow surface.

  14. Stretch-minimising stream surfaces

    KAUST Repository

    Barton, Michael

    2015-05-01

    We study the problem of finding stretch-minimising stream surfaces in a divergence-free vector field. These surfaces are generated by motions of seed curves that propagate through the field in a stretch minimising manner, i.e., they move without stretching or shrinking, preserving the length of their arbitrary arc. In general fields, such curves may not exist. How-ever, the divergence-free constraint gives rise to these \\'stretch-free\\' curves that are locally arc-length preserving when infinitesimally propagated. Several families of stretch-free curves are identified and used as initial guesses for stream surface generation. These surfaces are subsequently globally optimised to obtain the best stretch-minimising stream surfaces in a given divergence-free vector field. Our algorithm was tested on benchmark datasets, proving its applicability to incompressible fluid flow simulations, where our stretch-minimising stream surfaces realistically reflect the flow of a flexible univariate object. © 2015 Elsevier Inc. All rights reserved.

  15. Comment on 'Surface thermodynamics, surface stress, equations at surfaces and triple lines for deformable bodies'.

    Science.gov (United States)

    Gutman, E M

    2010-10-27

    In a recent publication by Olives (2010 J. Phys.: Condens. Matter 22 085005) he studied 'the thermodynamics and mechanics of the surface of a deformable body, following and refining the general approach of Gibbs' and believed that 'a new definition of the surface stress is given'. However, using the usual way of deriving the equations of Gibbs-Duhem type the author, nevertheless, has fallen into a mathematical discrepancy because he has tried to unite in one equation different thermodynamic systems and 'a new definition of the surface stress' has appeared known in the usual theory of elasticity.

  16. Critical Heegaard surfaces obtained by amalgamation

    CERN Document Server

    Lee, Jung Hoon

    2011-01-01

    Critical surfaces are defined by Bachman as topological index 2 surfaces, generalizing incompressible surfaces and strongly irreducible surfaces. In this paper we give a condition to obtain critical Heegaard surfaces by amalgamation. As a special case, we obtain critical Heegaard surfaces by boundary stabilization. It gives critical Heegaard surfaces of non-minimal genus, for 3-manifolds which do not admit distinct Heegaard splittings (up to isotopy).

  17. Modeling surface imperfections in thin films and nanostructured surfaces

    Science.gov (United States)

    Hansen, P.-E.; Madsen, J. S.; Jensen, S. A.; Madsen, M. H.; Karamehmedovic, M.

    2017-06-01

    Accurate scatterometry and ellipsometry characterization of non-perfect thin films and nanostructured surfaces are challenging. Imperfections like surface roughness make the associated modelling and inverse problem solution difficult due to the lack of knowledge about the imperfection on the surface. Combining measurement data from several instruments increases the knowledge of non-perfect surfaces. In this paper we investigate how to incorporate this knowledge of surface imperfection into inverse methods used in scatterometry and ellipsometry using the Rigorous Coupled Wave Analysis. Three classes of imperfections are examined. The imperfections are introduced as periodic structures with a super cell periods ten times larger than the simple grating period. Two classes of imperfections concern the grating and one class concern the substrate. It is shown that imperfections of a few nanometers can severely change the reflective response on silicon gratings. Inverse scatterometry analyses of gratings with imperfection using simulated data with white noise have been performed. The results show that scatterometry is a robust technology that is able to characterize grating imperfections provided that the imperfection class is known.

  18. Controlling surface reactions with nanopatterned surface elastic strain.

    Science.gov (United States)

    Li, Zhisheng; Potapenko, Denis V; Osgood, Richard M

    2015-01-27

    The application of elastic lattice strain is a promising approach for tuning material properties, but the attainment of a systematic approach for introducing a high level of strain in materials so as to study its effects has been a major challenge. Here we create an array of intense locally varying strain fields on a TiO2 (110) surface by introducing highly pressurized argon nanoclusters at 6-20 monolayers under the surface. By combining scanning tunneling microscopy imaging and the continuum mechanics model, we show that strain causes the surface bridge-bonded oxygen vacancies (BBOv), which are typically present on this surface, to be absent from the strained area and generates defect-free regions. In addition, we find that the adsorption energy of hydrogen binding to oxygen (BBO) is significantly altered by local lattice strain. In particular, the adsorption energy of hydrogen on BBO rows is reduced by ∼ 35 meV when the local crystal lattice is compressed by ∼ 1.3%. Our results provide direct evidence of the influence of strain on atomic-scale surface chemical properties, and such effects may help guide future research in catalysis materials design.

  19. Applications of surface analysis and surface theory in tribology

    Science.gov (United States)

    Ferrante, John

    1989-01-01

    Tribology, the study of adhesion, friction and wear of materials, is a complex field which requires a knowledge of solid state physics, surface physics, chemistry, material science, and mechanical engineering. It has been dominated, however, by the more practical need to make equipment work. With the advent of surface analysis and advances in surface and solid-state theory, a new dimension has been added to the analysis of interactions at tribological interfaces. In this paper the applications of tribological studies and their limitations are presented. Examples from research at the NASA Lewis Research Center are given. Emphasis is on fundamental studies involving the effects of monolayer coverage and thick films on friction and wear. A summary of the current status of theoretical calculations of defect energetics is presented. In addition, some new theoretical techniques which enable simplified quantitative calculations of adhesion, fracture, and friction are discussed.

  20. Efficacy of various surface disinfectants on an irregular surface.

    Science.gov (United States)

    Lado, E A; Anekal, S; Stout, F W

    1993-04-01

    Representative samples of hard surface disinfectants were tested against Pseudomonas aeruginosa (ATCC 27853) on frosted glass rods. The same protocol was followed by two investigators on 100 rods for each product tested. Results showed Sporicidin surface disinfectant (Ash Dentsply, York, Pa.) and household bleach 1:10 to be most effective against P. aeruginosa. Lysol disinfectant spray (Lehn & Fink Products, Montvale, N.J.), performed similarly whereas Biocide (Biotrol International, Woods Cross, Utah) failed to inhibit growth on more than half of the rods treated. Failure of the iodophor may be attributed to the use of cotton-filled gauze, because cellulose is believed to react with nascent iodine.

  1. Filling transitions on rough surfaces: inadequacy of Gaussian surface models

    CERN Document Server

    Dufour, Renaud; Herminghaus, Stephan

    2015-01-01

    We present numerical studies of wetting on various topographic substrates, including random topographies. We find good agreement with recent predictions based on an analytical interface-displacement-type theory \\cite{Herminghaus2012, Herminghaus2012a}. The phase diagrams are qualitatively as predicted, but differently in this study the critical points are found to lie within the physical parameter range (i.e., at positive contact angle) in all cases studied. Notably, it is corroborated that Gaussian random surfaces behave qualitatively different from all non-Gaussian topographies investigated, exhibiting a qualitatively different phase diagram. This shows that Gaussian random surfaces must be used with great care in the context of wetting phenomena.

  2. Surface phonons on Al(111) surface covered by alkali metals

    Science.gov (United States)

    Rusina, G. G.; Eremeev, S. V.; Borisova, S. D.; Sklyadneva, I. Yu.; Chulkov, E. V.

    2005-06-01

    We investigated the vibrational and structural properties of the Al(111)-(3×3)R30°-AM (AM=Na,K,Li) adsorbed systems using interaction potentials from the embedded-atom method. The surface relaxation, surface phonon dispersion, and polarization of vibrational modes for the alkali adatoms and the substrate atoms as well as the local density of states are discussed. Our calculated structural parameters are in close agreement with experimental and ab initio results. The obtained vibrational frequencies compare fairly well with the available experimental data.

  3. Sputtering of a silicon surface: Preferential sputtering of surface impurities

    Energy Technology Data Exchange (ETDEWEB)

    Nietiadi, Maureen L. [Physics Department and Research Center OPTIMAS, University Kaiserslautern, Erwin-Schrödinger-Straße, D-67663 Kaiserslautern (Germany); Rosandi, Yudi [Physics Department and Research Center OPTIMAS, University Kaiserslautern, Erwin-Schrödinger-Straße, D-67663 Kaiserslautern (Germany); Department of Physics, Universitas Padjadjaran, Jatinangor, Sumedang 45363 (Indonesia); Lorinčík, Jan [Faculty of Science, J. E. Purkinje University, České mládeže 8, 400 96 Ústí nad Labem (Czech Republic); Institute of Photonics and Electronics, Academy of Sciences of the Czech Republic, Chaberská 57, 182 51 Praha (Czech Republic); Urbassek, Herbert M., E-mail: urbassek@rhrk.uni-kl.de [Physics Department and Research Center OPTIMAS, University Kaiserslautern, Erwin-Schrödinger-Straße, D-67663 Kaiserslautern (Germany)

    2013-05-15

    We present molecular-dynamics simulations of the sputtering of an impurity atom off a Si 2×1 (100) surface by 2 keV Ar ions. The impurity is characterized by its mass and its binding energy to the Si substrate. We find that sputtering strongly decreases with the mass and even more strongly with the binding energy of the impurity atom to the matrix. The velocity of the impurity perpendicular to the surface is reduced with increasing impurity mass and binding energy. In terms of available ionization theories we can conclude that heavier impurities will have a smaller ionization probability.

  4. Scattered surface charge density: A tool for surface characterization

    KAUST Repository

    Naydenov, Borislav

    2011-11-28

    We demonstrate the use of nonlocal scanning tunneling spectroscopic measurements to characterize the local structure of adspecies in their states where they are significantly less perturbed by the probe, which is accomplished by mapping the amplitude and phase of the scattered surface charge density. As an example, we study single-H-atom adsorption on the n-type Si(100)-(4 × 2) surface, and demonstrate the existence of two different configurations that are distinguishable using the nonlocal approach and successfully corroborated by density functional theory. © 2011 American Physical Society.

  5. Blending Canal Surfaces Based on PH Curves

    Institute of Scientific and Technical Information of China (English)

    Chen-Dong Xu; Fa-Lai Chen

    2005-01-01

    In this paper, a new method for blending two canal surfaces is proposed. The blending surface is itself a generalized canal surface, the spine curve of which is a PH (Pythagorean-Hodograph) curve. The blending surface possesses an attractive property - its representation is rational. The method is extensible to blend general surfaces as long as the blending boundaries are well-defined.

  6. Characterization of Surface Modification of Polyethersulfone Membrane

    Science.gov (United States)

    Surface modification of polyethersulfone (PES) membrane surface using UV/ozone-treated grafting and interfacial polymerization on membrane surface was investigated in order to improve the resistance of membrane surface to protein adsorption. These methods of surface modification were compared in te...

  7. CORFIG- CORRECTOR SURFACE DESIGN SOFTWARE

    Science.gov (United States)

    Dantzler, A.

    1994-01-01

    Corrector Surface Design Software, CORFIG, calculates the optimum figure of a corrector surface for an optical system based on real ray traces. CORFIG generates the corrector figure in the form of a spline data point table and/or a list of polynomial coefficients. The number of spline data points as well as the number of coefficients is user specified. First, the optical system's parameters (thickness, radii of curvature, etc.) are entered. CORFIG will trace the outermost axial real ray through the uncorrected system to determine approximate radial limits for all rays. Then, several real rays are traced backwards through the system from the image to the surface that originally followed the object, within these radial limits. At this first surface, the local curvature is adjusted on a small scale to direct the rays toward the object, thus removing any accumulated aberrations. For each ray traced, this adjustment will be different, so that at the end of this process the resultant surface is made up of many local curvatures. The equations that describe these local surfaces, expressed as high order polynomials, are then solved simultaneously to yield the final surface figure, from which data points are extracted. Finally, a spline table or list of polynomial coefficients is extracted from these data points. CORFIG is intended to be used in the late stages of optical design. The system's design must have at least a good paraxial foundation. Preferably, the design should be at a stage where traditional methods of Seidel aberration correction will not bring about the required image spot size specification. CORFIG will read the system parameters of such a design and calculate the optimum figure for the first surface such that all of the original parameters remain unchanged. Depending upon the system, CORFIG can reduce the RMS image spot radius by a factor of 5 to 25. The original parameters (magnification, back focal length, etc.) are maintained because all rays upon which

  8. Kansei, surfaces and perception engineering

    Science.gov (United States)

    Rosen, B.-G.; Eriksson, L.; Bergman, M.

    2016-09-01

    The aesthetic and pleasing properties of a product are important and add significantly to the meaning and relevance of a product. Customer sensation and perception are largely about psychological factors. There has been a strong industrial and academic need and interest for methods and tools to quantify and link product properties to the human response but a lack of studies of the impact of surfaces. In this study, affective surface engineering is used to illustrate and model the link between customer expectations and perception to controllable product surface properties. The results highlight the use of the soft metrology concept for linking physical and human factors contributing to the perception of products. Examples of surface applications of the Kansei methodology are presented from sauna bath, health care, architectural and hygiene tissue application areas to illustrate, discuss and confirm the strength of the methodology. In the conclusions of the study, future research in soft metrology is proposed to allow understanding and modelling of product perception and sensations in combination with a development of the Kansei surface engineering methodology and software tools.

  9. Volume-Enclosing Surface Extraction

    CERN Document Server

    Schlei, B R

    2010-01-01

    A new method is presented here, which allows one to construct triangular surfaces from three-dimensional data sets, such as 3D image data and/or numerical simulation data that are based on regularly shaped, cubic lattices. This novel volume-enclosing surface extraction technique, which has been named VESTA, is guaranteed to always produce surfaces that do not contain any holes, e.g., in contrast to the well-known and very popular Marching Cubes algorithm, which has been developed by W.E. Lorensen and H.E. Cline in the mid-1980s. VESTA is not template based. In fact, the surface tiles are determined with a fast and robust construction technique. Among other things, VESTA's relationship to the DICONEX algorithm is explained, which -- in a lower-dimensional analogy -- produces contours from two-dimensional data sets, such as 2D gray-level images. In particular, the generation of isosurfaces from initially created VESTA surfaces is demonstrated here for the very first time. A few examples are provided, namely in ...

  10. Nanostructured surfaces of dental implants.

    Science.gov (United States)

    Bressan, Eriberto; Sbricoli, Luca; Guazzo, Riccardo; Tocco, Ilaria; Roman, Marco; Vindigni, Vincenzo; Stellini, Edoardo; Gardin, Chiara; Ferroni, Letizia; Sivolella, Stefano; Zavan, Barbara

    2013-01-17

    The structural and functional fusion of the surface of the dental implant with the surrounding bone (osseointegration) is crucial for the short and long term outcome of the device. In recent years, the enhancement of bone formation at the bone-implant interface has been achieved through the modulation of osteoblasts adhesion and spreading, induced by structural modifications of the implant surface, particularly at the nanoscale level. In this context, traditional chemical and physical processes find new applications to achieve the best dental implant technology. This review provides an overview of the most common manufacture techniques and the related cells-surface interactions and modulation. A Medline and a hand search were conducted to identify studies concerning nanostructuration of implant surface and their related biological interaction. In this paper, we stressed the importance of the modifications on dental implant surfaces at the nanometric level. Nowadays, there is still little evidence of the long-term benefits of nanofeatures, as the promising results achieved in vitro and in animals have still to be confirmed in humans. However, the increasing interest in nanotechnology is undoubted and more research is going to be published in the coming years.

  11. Nanostructured Surfaces of Dental Implants

    Directory of Open Access Journals (Sweden)

    Stefano Sivolella

    2013-01-01

    Full Text Available The structural and functional fusion of the surface of the dental implant with the surrounding bone (osseointegration is crucial for the short and long term outcome of the device. In recent years, the enhancement of bone formation at the bone-implant interface has been achieved through the modulation of osteoblasts adhesion and spreading, induced by structural modifications of the implant surface, particularly at the nanoscale level. In this context, traditional chemical and physical processes find new applications to achieve the best dental implant technology. This review provides an overview of the most common manufacture techniques and the related cells-surface interactions and modulation. A Medline and a hand search were conducted to identify studies concerning nanostructuration of implant surface and their related biological interaction. In this paper, we stressed the importance of the modifications on dental implant surfaces at the nanometric level. Nowadays, there is still little evidence of the long-term benefits of nanofeatures, as the promising results achieved in vitro and in animals have still to be confirmed in humans. However, the increasing interest in nanotechnology is undoubted and more research is going to be published in the coming years.

  12. Analysis of laser alloyed surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Jacobson, D.C.; Augustyniak, W.M.; Buene, L.; Draper, C.W.; Poate, J.M.

    1981-04-01

    Surface alloys of precious metals have many advantages over bulk alloys, the most obvious of which is cost reduction due to the reduced consumption of precious metal. There are several techniques for producing surface alloys. In this paper the laser irradiation technique is presented. The following lasers: CW CO/sub 2/, Q-switched Nd-YAG, frequency double Q-switched Nd-YAG, and pulsed ruby were used to irradiate and melt thin solid films of precious metals on metal substrates. This causes the surfaces to melt to a depth of approximately 10,000A. Alloying then takes place in the liquid phase where most metals are miscible. The high quench rates obtainable by this method of melting can result in the forming of metastable alloys. This melting and regrowth process is well understood and has been discussed in the literature over the last few years. This paper deals with two binary alloy systems, Au-Ni and Pd-Ti. Surface alloys of Au-Ni with a wide range of concentrations have been produced by laser irradiation of thin Au films on Ni. These films have been analyzed using Rutherford backscattering (RBS) and channeling. Many thin film metals other than Au have also been successfully alloyed using these methods. An example of a potential application is the laser surface alloying of Pd to Ti for corrosion passivation.

  13. Tribological Performance of Coated Surfaces

    Institute of Scientific and Technical Information of China (English)

    Kenneth Holmberg; Anssi Laukkanen

    2004-01-01

    The fundamentals of coating tribology is presented in a generalised holistic approach to friction and wear mechanisms of coated surfaces in dry sliding contacts. It is based on a classification of the tribological contact process into macromechanical, micromechanical, tribochemical contact mechanisms and material transfer. The tribological contact process is dominated by the macromechanical mechanisms, which have been systematically analysed by using four main parameters: the coating-to-substrate hardness relationship, the film thickness, the surface roughness and the debris in the contact. In this paper special attention is given to the microlevel mechanisms, and in particular new techniques for modelling the elastic, plastic and brittle behaviour of the surface by finite element (FEM) computer simulations. The contact condition with a sphere sliding over a plate coated with a very thin hard coating is analysed. A three dimensional FEM model has been developed for calculating the first principal stress distribution in the scratch tester contact of a diamond spherical tip moving with increased load on a 2 μm thick titanium nitride (TiN) coated steel surface. The model is comprehensive in that sense that it considers elastic, plastic and fracture behaviour of the contact surfaces. By identifying from a scratch experiment the location of the first crack and using this as input data can the fracture toughness of the coating be determined.

  14. Immersed surfaces and membranes transformations

    Science.gov (United States)

    Kats, E. I.; Monastyrsky, M. I.

    2015-06-01

    Physical and biological observation methods provide a variety of bilayer membranes’ shapes and their transformations. Besides, the topological and geometrical methods allow us to deduce a classification of all possible membrane surfaces. This double-sided approach leads to a deeper insight into membranes properties. Our goal is to apply an appropriate mathematical technique for classifying vesicles (closed surfaces in mathematical terminology) and for their transformation ways. The problem turned out to be an intricate one, and to our knowledge no mathematical techniques have been applied to its solution. We find that all vesicles can be decomposed in a small number of universality classes generated by a few ‘bricks’: a torus, a screwed torus, and the real projective plane. We consider several ways of transforming membrane surfaces, bearing in mind that they possess an additional extremal property. Our method exploits different constructions of minimal surfaces in S3. We estimate energetic barrier for transformation of minimal membrane surfaces using the so-called doubling procedure. This problem is far from being a pure theoretical exercise. For instance, almost all cells’ biological functions, or tumor progression, are accompanied by apparently singular cell membrane transformations.

  15. EDITORIAL: Molecular switches at surfaces Molecular switches at surfaces

    Science.gov (United States)

    Weinelt, Martin; von Oppen, Felix

    2012-10-01

    In nature, molecules exploit interaction with their environment to realize complex functionalities on the nanometer length scale. Physical, chemical and/or biological specificity is frequently achieved by the switching of molecules between microscopically different states. Paradigmatic examples are the energy production in proton pumps of bacteria or the signal conversion in human vision, which rely on switching molecules between different configurations or conformations by external stimuli. The remarkable reproducibility and unparalleled fatigue resistance of these natural processes makes it highly desirable to emulate nature and develop artificial systems with molecular functionalities. A promising avenue towards this goal is to anchor the molecular switches at surfaces, offering new pathways to control their functional properties, to apply electrical contacts, or to integrate switches into larger systems. Anchoring at surfaces allows one to access the full range from individual molecular switches to self-assembled monolayers of well-defined geometry and to customize the coupling between molecules and substrate or between adsorbed molecules. Progress in this field requires both synthesis and preparation of appropriate molecular systems and control over suitable external stimuli, such as light, heat, or electrical currents. To optimize switching and generate function, it is essential to unravel the geometric structure, the electronic properties and the dynamic interactions of the molecular switches on surfaces. This special section, Molecular Switches at Surfaces, collects 17 contributions describing different aspects of this research field. They analyze elementary processes, both in single molecules and in ensembles of molecules, which involve molecular switching and concomitant changes of optical, electronic, or magnetic properties. Two topical reviews summarize the current status, including both challenges and achievements in the field of molecular switches on

  16. Surface operators from M -strings

    Science.gov (United States)

    Mori, Hironori; Sugimoto, Yuji

    2017-01-01

    It has been found that surface operators have a significant role in Alday-Gaiotto-Tachikawa (AGT) relation. This duality is an outstanding consequence of M -theory, but it is actually encoded into the brane web for which the topological string can work. From this viewpoint, the surface defect in AGT relation is geometrically engineered as a toric brane realization. Also, there is a class of the brane configuration in M -theory called M -strings which can be translated into the language of the topological string. In this work, we propose a new M -string configuration which can realize AGT relation in the presence of the surface defect by utilizing the geometric transition in the refined topological string.

  17. Tamm-Langmuir surface waves

    Science.gov (United States)

    Golenitskii, K. Â. Yu.; Koshelev, K. Â. L.; Bogdanov, A. Â. A.

    2016-10-01

    In this work we develop a theory of surface electromagnetic waves localized at the interface of periodic metal-dielectric structures. We have shown that the anisotropy of plasma frequency in metal layers lifts the degeneracy of plasma oscillations and opens a series of photonic band gaps. This results in appearance of surface waves with singular density of states—we refer to them as Tamm-Langmuir waves. Such naming is natural since we have found that their properties are very similar to the properties of both bulk Langmuir and surface Tamm waves. Depending on the anisotropy parameters, Tamm-Langmuir waves can be either forward or backward waves. Singular density of states and high sensitivity of the dispersion to the anisotropy of the structure makes Tamm-Langmuir waves very promising for potential applications in nanophotonics and biosensing.

  18. Sensing surface PEGylation with microcantilevers

    Directory of Open Access Journals (Sweden)

    Natalija Backmann

    2010-11-01

    Full Text Available Polymers are often used to modify surface properties to control interfacial processes. Their sensitivity to solvent conditions and ability to undergo conformational transitions makes polymers attractive in tailoring surface properties with specific functionalities leading to applications in diverse areas ranging from tribology to colloidal stability and medicine. A key example is polyethylene glycol (PEG, which is widely used as a protein-resistant coating given its low toxicity and biocompatibility. We report here a microcantilever-based sensor for the in situ characterization of PEG monolayer formation on Au using the “grafting to” approach. Moreover, we demonstrate how microcantilevers can be used to monitor conformational changes in the grafted PEG layer in different solvent conditions. This is supported by atomic force microscope (AFM images and force–distance curve measurements of the microcantilever chip surface, which show that the grafted PEG undergoes a reversible collapse when switching between good and poor solvent conditions, respectively.

  19. Switchable Hydrophobic-Hydrophilic Surfaces

    CERN Document Server

    Bunker, B C; Huber, D L; Kent, M S; Kushmerick, J G; Lopez, G P; Manginell, R P; Méndez, S E; Yim, H

    2002-01-01

    Tethered films of poly n-isopropylacrylamide (PNIPAM) films have been developed as materials that can be used to switch the chemistry of a surface in response to thermal activation. In water, PNIPAM exhibits a thermally-activated phase transition that is accompanied by significant changes in polymer volume, water contact angle, and protein adsorption characteristics. New synthesis routes have been developed to prepare PNIPAM films via in-situ polymerization on self-assembled monolayers. Swelling transitions in tethered films have been characterized using a wide range of techniques including surface plasmon resonance, attenuated total reflectance infrared spectroscopy, interfacial force microscopy, neutron reflectivity, and theoretical modeling. PNIPAM films have been deployed in integrated microfluidic systems. Switchable PNIPAM films have been investigated for a range of fluidic applications including fluid pumping via surface energy switching and switchable protein traps for pre-concentrating and separating...

  20. Sound radiation from finite surfaces

    DEFF Research Database (Denmark)

    Brunskog, Jonas

    2013-01-01

    A method to account for the effect of finite size in acoustic power radiation problem of planar surfaces using spatial windowing is developed. Cremer and Heckl presents a very useful formula for the power radiating from a structure using the spatially Fourier transformed velocity, which combined...... with spatially windowing of a plane waves can be used to take into account the finite size. In the present paper, this is developed by means of a radiation impedance for finite surfaces, that is used instead of the radiation impedance for infinite surfaces. In this way, the spatial windowing is included...... in the radiation formula directly, and no pre-windowing is needed. Examples are given for the radiation efficiency, and the results are compared with results found in the literature....

  1. Surface motility of Myxococcus Xanthus

    Science.gov (United States)

    Gibiansky, Maxsim; Hu, William; Jin, Fan; Zhao, Kun; Shi, Wenyuan; Wong, Gerard

    2011-03-01

    We examine the surface motility of Myxococcus Xanthus, a bacterium species found in soil that exhibits a broad range of self-organizing behavior, including predatory ``swarms'' and survival-enhancing ``fruiting bodies.'' To quantify the effects of exopolysaccharides (EPS) on surface adhesion and motility, we use modified versions of particle tracking algorithms from colloid physics to analyze bacterial trajectories, and compare the wild type (WT) strain to EPS knockout and EPS overproducer strains. We find that EPS deficiency leads to an increase in the number of ``standing'' bacteria oriented normal to the surface, attached by one end with minimal motility. EPS overproduction, by contrast, suppresses this phenotype. A detailed investigation of the influence of EPS on Myxococcus social motility will be presented.

  2. Spherical Demons: Fast Surface Registration

    Science.gov (United States)

    Yeo, B.T. Thomas; Sabuncu, Mert; Vercauteren, Tom; Ayache, Nicholas; Fischl, Bruce; Golland, Polina

    2009-01-01

    We present the fast Spherical Demons algorithm for registering two spherical images. By exploiting spherical vector spline interpolation theory, we show that a large class of regularizers for the modified demons objective function can be efficiently implemented on the sphere using convolution. Based on the one parameter subgroups of diffeomorphisms, the resulting registration is diffeomorphic and fast – registration of two cortical mesh models with more than 100k nodes takes less than 5 minutes, comparable to the fastest surface registration algorithms. Moreover, the accuracy of our method compares favorably to the popular FreeSurfer registration algorithm. We validate the technique in two different settings: (1) parcellation in a set of in-vivo cortical surfaces and (2) Brodmann area localization in ex-vivo cortical surfaces. PMID:18979813

  3. Surface stress-based biosensors.

    Science.gov (United States)

    Sang, Shengbo; Zhao, Yuan; Zhang, Wendong; Li, Pengwei; Hu, Jie; Li, Gang

    2014-01-15

    Surface stress-based biosensors, as one kind of label-free biosensors, have attracted lots of attention in the process of information gathering and measurement for the biological, chemical and medical application with the development of technology and society. This kind of biosensors offers many advantages such as short response time (less than milliseconds) and a typical sensitivity at nanogram, picoliter, femtojoule and attomolar level. Furthermore, it simplifies sample preparation and testing procedures. In this work, progress made towards the use of surface stress-based biosensors for achieving better performance is critically reviewed, including our recent achievement, the optimally circular membrane-based biosensors and biosensor array. The further scientific and technological challenges in this field are also summarized. Critical remark and future steps towards the ultimate surface stress-based biosensors are addressed.

  4. Mobile surface water filtration system

    Directory of Open Access Journals (Sweden)

    Aashish Vatsyayan

    2012-09-01

    Full Text Available To design a mobile system for surface water filtrationMethodology: the filtration of surface impurities begins with their retraction to concentrated thickness using non ionising surfactants, then isolation using surface tension property and sedimentation of impurities in process chamber using electrocoagulation. Result:following studies done to determine the rate of spreading of crude oil on water a method for retraction of spread crude oil to concentrated volumes is developed involving addition of non -ionising surfactants in contrast to use of dispersants. Electrocoagulation process involves multiple processes taking place to lead to depositionof impurities such as oil, grease, metals. Studies of experiments conducted reveals parameters necessary for design of electrocoagulation process chamber though a holistic approach towards system designing is still required. Propeller theory is used in determining the required design of propeller and the desired thrust, the overall structure will finally contribute in deciding the choice of propeller.

  5. Functionalised Polymers by Surface Modification

    Institute of Scientific and Technical Information of China (English)

    Jon-Paul Griffiths; M. G. Moloney

    2005-01-01

    @@ 1Introduction Surface-active polymers are of substantial importance in many diverse aspects of modern technology, with applications ranging from solid phase chemical synthesis related to drug discovery and chemical catalysis to biocompatible/bioactive medical implants and prostheses, and to surface-modified fabrics. Whilst there are a number of existing physical (e. g. corona or plasma discharge, ion beam irradiation[1] ) and chemical (e. g.silanisation, oxidation, chlorination, acylation and quaternisation[2-4]) methods for the surface modification of polymers, the frequent requirement for significant infrastructure, harsh reaction conditions, and limitation to specific polymer types (e. g. polybutadiene[5] ), which must possess suitable chemical functionality capable of direct modification, led us to consider alternative chemical methods. Desirable was an alternative that would be amenable to a large range of polymers, permitting direct chemical modification under mild conditions and using inexpensive reagents.

  6. Spanning quadrangulations of triangulated surfaces

    DEFF Research Database (Denmark)

    Kündgen, André; Thomassen, Carsten

    2017-01-01

    In this paper we study alternating cycles in graphs embedded in a surface. We observe that 4-vertex-colorability of a triangulation on a surface can be expressed in terms of spanninq quadrangulations, and we establish connections between spanning quadrangulations and cycles in the dual graph which...... are noncontractible and alternating with respect to a perfect matching. We show that the dual graph of an Eulerian triangulation of an orientable surface other than the sphere has a perfect matching M and an M-alternating noncontractible cycle. As a consequence, every Eulerian triangulation of the torus has...... a nonbipartite spanning quadrangulation. For an Eulerian triangulation G of the projective plane the situation is different: If the dual graph G∗ is nonbipartite, then G∗ has no noncontractible alternating cycle, and all spanning quadrangulations of G are bipartite. If the dual graph G∗ is bipartite, then it has...

  7. Tamm-Langmuir surface waves

    CERN Document Server

    Golenitskii, K U; Bogdanov, A A

    2016-01-01

    In this work we develop a theory of surface electromagnetic waves localized at the interface of periodic metal-dielectric structures. We have shown that the anisotropy of plasma frequency in metal layers lifts the degeneracy of plasma oscillations and opens a series of photonic band gaps. This results in appearance of surface waves with singular density of states - we refer to them as Tamm-Langmuir waves. Such naming is natural since we have found that their properties are very similar to the properties of both bulk Langmuir and surface Tamm waves. Depending on the anisotropy parameters, Tamm-Langmuir waves can be either forward or backward waves. Singular density of states and high sensitivity of the dispersion to the anisotropy of the structure makes Tamm-Langmuir waves very promising for potential applications in nanophotonics and biosensing.

  8. Introducing surface tension to spacetime

    Science.gov (United States)

    Perko, H. A.

    2017-05-01

    Concepts from physical chemistry of surfaces and surface tension are applied to spacetime. More specifically, spacetime is modeled as a spatial fluid continuum bound together by a multi-dimensional membrane of time. A metric tensor that relates empty flat spacetime to energetic curved spacetime is found. Equations of motion for an infinitesimal unit of spacetime are derived. The equation of motion in a time-like direction is a Klein-Gordon type equation. The equations of motion in space-like directions take the form of Schrodinger’s equation where Plank’s constant is related to membrane elastic modulus. Although much work remains, it is suggested that the spacetime surface tension may serve as a mechanical model for many phenomena in quantum mechanics and atomic particle physics.

  9. Surface flow measurements from drones

    Science.gov (United States)

    Tauro, Flavia; Porfiri, Maurizio; Grimaldi, Salvatore

    2016-09-01

    Drones are transforming the way we sense and interact with the environment. However, despite their increased capabilities, the use of drones in geophysical sciences usually focuses on image acquisition for generating high-resolution maps. Motivated by the increasing demand for innovative and high performance geophysical observational methodologies, we posit the integration of drone technology and optical sensing toward a quantitative characterization of surface flow phenomena. We demonstrate that a recreational drone can be used to yield accurate surface flow maps of sub-meter water bodies. Specifically, drone's vibrations do not hinder surface flow observations, and velocity measurements are in agreement with traditional techniques. This first instance of quantitative water flow sensing from a flying drone paves the way to novel observations of the environment.

  10. The surface science of enzymes

    DEFF Research Database (Denmark)

    Rod, Thomas Holm; Nørskov, Jens Kehlet

    2002-01-01

    One of the largest challenges to science in the coming years is to find the relation between enzyme structure and function. Can we predict which reactions an enzyme catalyzes from knowledge of its structure-or from its amino acid sequence? Can we use that knowledge to modify enzyme function......? To solve these problems we must understand in some detail how enzymes interact with reactants from its surroundings. These interactions take place at the surface of the enzyme and the question of enzyme function can be viewed as the surface science of enzymes. In this article we discuss how to describe...... catalysis by enzymes, and in particular the analogies between enzyme catalyzed reactions and surface catalyzed reactions. We do this by discussing two concrete examples of reactions catalyzed both in nature (by enzymes) and in industrial reactors (by inorganic materials), and show that although analogies...

  11. The Surface Chemical Properties of Novel High Surface Area Solids ...

    African Journals Online (AJOL)

    and MFA3 are the result of the high chromium content in the original ash (UFA1). ... ties has a significant influence on the crystal form produced during zeolite ... that the surface is enriched in Si compared with the bulk compo- sition. This is ...

  12. Knocking on surfaces : interactions of hyperthermal particles with metal surfaces

    NARCIS (Netherlands)

    Ueta, Hirokazu

    2010-01-01

    The study of gas-surface interaction dynamics is important both for the fundamental knowledge it provides and also to aid the development of applications involving processes such as sputtering, plasma etching and heterogeneous catalysis. Elementary steps in the interactions, such as chemical reactio

  13. Dispersion controlled by permeable surfaces: surface properties and scaling

    Energy Technology Data Exchange (ETDEWEB)

    Ling, Bowen; Tartakovsky, Alexandre M.; Battiato, Ilenia

    2016-07-19

    Permeable and porous surfaces are common in natural and engineered systems. Flow and transport above such surfaces are significantly affected by the surface properties, e.g. matrix porosity and permeability. However, the relationship between such properties and macroscopic solute transport is largely unknown. In this work, we focus on mass transport in a two-dimensional channel with permeable porous walls under fully developed laminar flow conditions. By means of perturbation theory and asymptotic analysis, we derive the set of upscaled equations describing mass transport in the coupled channel–porous-matrix system and an analytical expression relating the dispersion coefficient with the properties of the surface, namely porosity and permeability. Our analysis shows that their impact on the dispersion coefficient strongly depends on the magnitude of the Péclet number, i.e. on the interplay between diffusive and advective mass transport. Additionally, we demonstrate different scaling behaviours of the dispersion coefficient for thin or thick porous matrices. Our analysis shows the possibility of controlling the dispersion coefficient, i.e. transverse mixing, by either active (i.e. changing the operating conditions) or passive mechanisms (i.e. controlling matrix effective properties) for a given Péclet number. By elucidating the impact of matrix porosity and permeability on solute transport, our upscaled model lays the foundation for the improved understanding, control and design of microporous coatings with targeted macroscopic transport features.

  14. Metal surfaces: Surface, step and kink formation energies

    DEFF Research Database (Denmark)

    Kollár, J.; Vitos, Levente; Johansson, B.;

    2000-01-01

    We review the surface, step, and kink energies in monoatomic metallic systems. A systematic comparison is given between the theoretical results based on density functional theory and available experimental data. Our calculated values are used to predict the equilibrium shapes of small metal...

  15. Mineralogy of the Martian Surface: Crustal Composition to Surface Processes

    Science.gov (United States)

    Mustard, John F.

    1997-01-01

    The main results have been published in the refereed literature, and thus this report serves mainly to summarize the main findings and indicate where the detailed papers may be found. Reflectance spectroscopy has been an important tool for determining the mineralogic makeup of the near surface materials on Mars. Analysis of the spectral properties of the surface have demonstrated that these attributes are heterogeneous from the coarse spatial but high spectral resolution spectra obtained with telescopes to the high spatial but coarse spectral resolution Viking data (e.g. Arvidson et al., 1989; McEwen et al., 1989). Low albedo materials show strong evidence for the presence of igneous rock forming minerals while bright materials are generally interpreted as representing heavily altered crustal material. How these materials are physically and genetically related has important implications for understanding martian surface properties and processes, weathering histories and paths, and crustal composition. The goal of this research is to characterize the physical and chemical properties of low albedo materials on Mars and the relationship to intermediate and high albedo materials. Fundamental science questions to be pursued include: (1) the observed distributions of soil, rock, and dust a function of physical processes or weathering and (2) different stages of chemical and physical alteration fresh rock identified. These objectives will be addressed through detailed analyses and modelling of the ISM data from the Phobos-2 mission with corroborating evidence of surface composition and properties provided by data from the Viking mission.

  16. SURFACE ENERGY BALANCE OVER ORANGE ORCHARD USING SURFACE RENEWAL ANALYSIS

    Directory of Open Access Journals (Sweden)

    Salvatore Barbagallo

    2009-12-01

    Full Text Available Reliable estimation of surface sensible and latent heat flux is the most important process to appraise energy and mass exchange among atmosphere and biosphere. In this study the surface energy fluxes were measured over an irrigated orange orchard during 2005-2008 monitoring periods using a Surface Renewal- Energy Balance approach. The experimental area is located in a representative orchard growing area of eastern Sicily (Italy. The performance of Surface Renewal (SR analysis for estimating sensible heat flux (H was analysed and evaluated in terms of correlation with H fluxes from the eddy covariance (EC method. Study revealed that the mean available energy (RN- G and latent heat flux (LE were of about 300 W m-2 and 237 W m-2, respectively, during dry periods and unstable-case atmospheric conditions. The estimated crop coefficient Kc values for the orchard crop averaged close to 0.80, which is considerably higher than previous FAO studies that found the value to be 0.65 for citrus with 70% of ground cover. The intercepted photosynthetically active radiation (LI PAR by the crop was measured and relationships between LAI and crop coefficient (Kc were established.

  17. Local excitation of surface plasmon polaritons in random surface nanostructures

    DEFF Research Database (Denmark)

    Bozhevolnyi, S.I.; Volkov, V.S.; Boltasseva, Alexandra;

    2003-01-01

    We investigate local excitation of surface plasmon polaritons (SPPs) at a 55-nm-thick gold layer covered with randomly located scatterers (density similar to75 mum(-2)) by using an uncoated fiber tip of a near-field optical microscope as a radiation source and detecting the radiation scattered...

  18. DISAGGREGATION OF GOES LAND SURFACE TEMPERATURES USING SURFACE EMISSIVITY

    Science.gov (United States)

    Accurate temporal and spatial estimation of land surface temperatures (LST) is important for modeling the hydrological cycle at field to global scales because LSTs can improve estimates of soil moisture and evapotranspiration. Using remote sensing satellites, accurate LSTs could be routine, but unfo...

  19. Local excitation of surface plasmon polaritons in random surface nanostructures

    DEFF Research Database (Denmark)

    Bozhevolnyi, S.I.; Volkov, V.S.; Boltasseva, Alexandra

    2003-01-01

    We investigate local excitation of surface plasmon polaritons (SPPs) at a 55-nm-thick gold layer covered with randomly located scatterers (density similar to75 mum(-2)) by using an uncoated fiber tip of a near-field optical microscope as a radiation source and detecting the radiation scattered...

  20. Polygon formation and surface flow on a rotating fluid surface

    DEFF Research Database (Denmark)

    Bergmann, Raymond; Tophøj, Laust Emil Hjerrild; Homan, T. A. M.;

    2011-01-01

    We present a study of polygons forming on the free surface of a water flow confined to a stationary cylinder and driven by a rotating bottom plate as described by Jansson et al. (Phys. Rev. Lett., vol. 96, 2006, 174502). In particular, we study the case of a triangular structure, either completel...

  1. Surface rheology and interface stability.

    Energy Technology Data Exchange (ETDEWEB)

    Yaklin, Melissa A.; Cote, Raymond O.; Moffat, Harry K.; Grillet, Anne Mary; Walker, Lynn; Koehler, Timothy P.; Reichert, Matthew D. (Carnegie Mellon University, Pittsburgh, PA); Castaneda, Jaime N.; Mondy, Lisa Ann; Brooks, Carlton, F.

    2010-11-01

    We have developed a mature laboratory at Sandia to measure interfacial rheology, using a combination of home-built, commercially available, and customized commercial tools. An Interfacial Shear Rheometer (KSV ISR-400) was modified and the software improved to increase sensitivity and reliability. Another shear rheometer, a TA Instruments AR-G2, was equipped with a du Nouey ring, bicone geometry, and a double wall ring. These interfacial attachments were compared to each other and to the ISR. The best results with the AR-G2 were obtained with the du Nouey ring. A Micro-Interfacial Rheometer (MIR) was developed in house to obtain the much higher sensitivity given by a smaller probe. However, it was found to be difficult to apply this technique for highly elastic surfaces. Interfaces also exhibit dilatational rheology when the interface changes area, such as occurs when bubbles grow or shrink. To measure this rheological response we developed a Surface Dilatational Rheometer (SDR), in which changes in surface tension with surface area are measured during the oscillation of the volume of a pendant drop or bubble. All instruments were tested with various surfactant solutions to determine the limitations of each. In addition, foaming capability and foam stability were tested and compared with the rheology data. It was found that there was no clear correlation of surface rheology with foaming/defoaming with different types of surfactants, but, within a family of surfactants, rheology could predict the foam stability. Diffusion of surfactants to the interface and the behavior of polyelectrolytes were two subjects studied with the new equipment. Finally, surface rheological terms were added to a finite element Navier-Stokes solver and preliminary testing of the code completed. Recommendations for improved implementation were given. When completed we plan to use the computations to better interpret the experimental data and account for the effects of the underlying bulk

  2. Surface states in crystals with low-index surfaces

    Institute of Scientific and Technical Information of China (English)

    王会平; 陶瑞宝

    2015-01-01

    For most of the conventional crystals with low-index surfaces, the hopping between the nearest neighbor (1NN) crystal planes (CPs) is dominant and the ones from the nNN (2≤n<∞) CPs are relatively weak, considered as small perturbations. The recent theoretical analysis [1] has demonstrated the absence of surface states at the level of the hopping approximation between the 1NN CPs when the original infinite crystal has the geometric reflection symmetry (GRS) for each CP. Meanwhile, based on the perturbation theory, it has also been shown that small perturbations from the hopping between the nNN (2≤n<∞) CPs and surface relaxation have no impact on the above conclusion. However, for the crystals with strong intrinsic spin-orbit coupling (SOC), the dominant terms of intrinsic SOC associate with two 1NN bond hoppings. Thus SOC will significantly contribute the hoppings from the 1NN and/or 2NN CPs except the ones within each CP. Here, we will study the effect of the hopping between the 2NN CPs on the surface states in model crystals with three different type structures (Type I:“· · ·–P–P–P–P–· · ·”, Type II:“· · ·–P–Q–P–Q–· · ·”and Type III:“· · ·–P=Q–P=Q–· · ·”where P and Q indicate CPs and the signs“–”and“=”mark the distance between the 1NN CPs). In terms of analytical and numerical calculations, we study the behavior of surface states in three types after the symmetric/asymmetric hopping from the 2NN CPs is added. We analytically prove that the symmetric hopping from the 2NN CPs cannot induce surface states in Type I when each CP has only one electron mode. The numerical calculations also provide strong support for the conclusion, even up to 5NN. However, in general, the coupling from the 2NN CPs (symmetric and asymmetric) is favorable to generate surface states except Type I with single electron mode only.

  3. Method of surface preparation of niobium

    Science.gov (United States)

    Srinivasan-Rao, Triveni; Schill, John F.

    2003-01-01

    The present invention is for a method of preparing a surface of niobium. The preparation method includes polishing, cleaning, baking and irradiating the niobium surface whereby the resulting niobium surface has a high quantum efficiency.

  4. New algorithms for evaluating parametric surface

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Through generalization of mathematical model of surface lofting program in the CONSURF system, the definitions for two generalized Ball surfaces and their recursive algorithms are given. Furthermore, the conversion al gorithms from Bézier surface to these two generalized Ball surfaces are presented. On the basis of these algorithms, two more efficient algorithms for evaluating parametric surfaces are also derived. One uses generalized Ball forms directly for evaluating surface, and the other converts the given Bézier surface to a generalized Ball surface firstly, and then evalu ates the surface. Both theoretical analysis and example computations show that the two new algorithms are more efficient than the de Casteljau algorithm. Especially when Wang-Ball surface is used, the time complexity is reduced from cubic to quadratic of the degree of the surface. If these algorithms are applied to displaying, interactive rendering, designing, intersection-finding, offsetting and approximating for surfaces, considerable economic results can be achieved.

  5. Surface cleanliness of fluid systems, specification for

    Science.gov (United States)

    1995-01-01

    This specification establishes surface cleanliness levels, test methods, cleaning and packaging requirements, and protection and inspection procedures for determining surface cleanliness. These surfaces pertain to aerospace parts, components, assemblies, subsystems, and systems in contact with any fluid medium.

  6. Polishing compound for plastic surfaces

    Science.gov (United States)

    Stowell, Michael S.

    1995-01-01

    A polishing compound for plastic surfaces. The compound contains by weight approximately 4 to 17 parts at least one petroleum distillate lubricant, 1 to 6 parts mineral spirits, 2.5 to 15 parts abrasive particles, and 2.5 to 10 parts water. The abrasive is tripoli or a similar material that contains fine particles silica. Preferably, most of the abrasive particles are less than approximately 10 microns, more preferably less than approximately 5 microns in size. The compound is used on PLEXIGLAS.TM., LEXAN.TM., LUCITE.TM., polyvinyl chloride (PVC) and similar plastic materials whenever a smooth, clear polished surface is desired.

  7. Method of passivating semiconductor surfaces

    Science.gov (United States)

    Wanlass, Mark W.

    1990-01-01

    A method of passivating Group III-V or II-VI semiconductor compound surfaces. The method includes selecting a passivating material having a lattice constant substantially mismatched to the lattice constant of the semiconductor compound. The passivating material is then grown as an ultrathin layer of passivating material on the surface of the Group III-V or II-VI semiconductor compound. The passivating material is grown to a thickness sufficient to maintain a coherent interface between the ultrathin passivating material and the semiconductor compound. In addition, a device formed from such method is also disclosed.

  8. Image Interpolation Through Surface Reconstruction

    Institute of Scientific and Technical Information of China (English)

    ZHANG Ling; LI Xue-mei

    2013-01-01

    Reconstructing an HR (high-resolution) image which preserves the image intrinsic structures from its LR ( low-resolution) counterpart is highly challenging. This paper proposes a new surface reconstruction algorithm applied to image interpolation. The interpolation surface for the whole image is generated by putting all the quadratic polynomial patches together. In order to eliminate the jaggies of the edge, a new weight function containing edge information is incorporated into the patch reconstruction procedure as a constraint. Extensive experimental results demonstrate that our method produces better results across a wide range of scenes in terms of both quantitative evaluation and subjective visual quality.

  9. Capacitor film surface assessment studies

    Science.gov (United States)

    Galperin, I.; White, W.

    1985-02-01

    In the present investigation of the optical surface of the three widely used, biaxially oriented capacitor films, polypropylene, polyvinylidene fluoride, and polyester, with attention to film surface defects and thickness variation, the defects and their rate of occurrence proved traceable in terms of polymer structure, chemical grouping, and fabrication processing. Film thickness variation was small, yet differed for each film type. Film breakdown voltages have been determined, and alternative causes for the voltage values obtained are proposed. A reciprocal relation is noted between the film breakdown voltage and the dielectric constant.

  10. Structure of the moon's surface

    CERN Document Server

    Fielder, Gilbert

    1961-01-01

    Structure of the Moon's Surface aims to assemble and marshal relevant matter, and to produce a largely unprejudiced text which brings lunar studies up to date and stresses the importance of certain features of the Moon which have frequently been disregarded in the past, largely because of lack of knowledge about them. The book contains 14 chapters organized into two parts. Part I reviews and summarizes important physical problems. These include the liberations of the moon; height determinations of points of the moon's surface; the figure of the moon; and the moon's temperature and atmosphere.

  11. Markov Random Field Surface Reconstruction

    DEFF Research Database (Denmark)

    Paulsen, Rasmus Reinhold; Bærentzen, Jakob Andreas; Larsen, Rasmus

    2010-01-01

    ) and knowledge about data (the observation model) in an orthogonal fashion. Local models that account for both scene-specific knowledge and physical properties of the scanning device are described. Furthermore, how the optimal distance field can be computed is demonstrated using conjugate gradients, sparse......A method for implicit surface reconstruction is proposed. The novelty in this paper is the adaption of Markov Random Field regularization of a distance field. The Markov Random Field formulation allows us to integrate both knowledge about the type of surface we wish to reconstruct (the prior...

  12. Surface Flow from Visual Cues

    OpenAIRE

    Petit, Benjamin,; Letouzey, Antoine; Boyer, Edmond; Franco, Jean-Sébastien

    2011-01-01

    International audience; In this paper we study the estimation of dense, instantaneous 3D motion fields over a non-rigidly moving surface observed by multi-camera systems. The motivation arises from multi-camera applications that require motion information, for arbitrary subjects, in order to perform tasks such as surface tracking or segmentation. To this aim, we present a novel framework that allows to efficiently compute dense 3D displacement fields using low level visual cues and geometric con...

  13. Polishing compound for plastic surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Stowell, M.S.

    1993-01-01

    A polishing compound for plastic surfaces is disclosed. The compound contains by weight approximately 4 to 17 parts at least one petroleum distillate lubricant, 1 to 6 parts mineral spirits, 2.5 to 15 parts abrasive particles, and 2.5 to 10 parts water. The abrasive is tripoli or a similar material that contains colloidal silica. Preferably, most of the abrasive particles are less than approximately 10 microns, more preferably less than approximately 5 microns in size. The compound is used on PLEXIGLAS{sup TM}, LEXAN{sup TM}, LUCITE{sup TM}, polyvinyl chloride (PVC) and similar plastic materials whenever a smooth, clear polished surface is desired.

  14. Cold atoms close to surfaces

    DEFF Research Database (Denmark)

    Krüger, Peter; Wildermuth, Stephan; Hofferberth, Sebastian

    2005-01-01

    Microscopic atom optical devices integrated on atom chips allow to precisely control and manipulate ultra-cold (T atoms and Bose-Einstein condensates (BECs) close to surfaces. The relevant energy scale of a BEC is extremely small (down to ... be utilized as a sensor for variations of the potential energy of the atoms close to the surface. Here we describe how to use trapped atoms as a measurement device and analyze the performance and flexibility of the field sensor. We demonstrate microscopic magnetic imaging with simultaneous high spatial...

  15. Surface spin-valve effect.

    Science.gov (United States)

    Yanson, I K; Naidyuk, Yu G; Fisun, V V; Konovalenko, A; Balkashin, O P; Triputen, L Yu; Korenivski, V

    2007-04-01

    We report an observation of spin-valve-like hysteresis within a few atomic layers at a ferromagnetic interface. We use phonon spectroscopy of nanometer-sized point contacts as an in situ probe to study the mechanism of the effect. Distinctive energy phonon peaks for contacts with dissimilar nonmagnetic outer electrodes allow localizing the observed spin switching to the top or bottom interfaces for nanometer thin ferromagnetic layers. The mechanism consistent with our data is energetically distinct atomically thin surface spin layers that can form current- or field-driven surface spin-valves within a single ferromagnetic film.

  16. Mica surfaces stabilize pentavalent uranium.

    Science.gov (United States)

    Ilton, Eugene S; Haiduc, Anca; Cahill, Christopher L; Felmy, Andrew R

    2005-05-02

    High-resolution X-ray photoelectron spectroscopy was used to demonstrate that reduction of aqueous U6+ at ferrous mica surfaces at 25 degrees C preserves U5+ as the dominant sorbed species over a broad range of solution compositions. Polymerization of sorbed U5+ with sorbed U6+ and U4+ is identified as a possible mechanism for how mineral surfaces circumvent the rapid disproportionation of aqueous U5+. The general nature of this mechanism suggests that U5+ could play an important, but previously unidentified, role in the low-temperature chemistry of uranium in reducing, heterogeneous aqueous systems.

  17. Interactive Design of Developable Surfaces

    KAUST Repository

    Tang, Chengcheng

    2016-01-15

    We present a new approach to geometric modeling with developable surfaces and the design of curved-creased origami. We represent developables as splines and express the nonlinear conditions relating to developability and curved folds as quadratic equations. This allows us to utilize a constraint solver, which may be described as energy-guided projection onto the constraint manifold, and which is fast enough for interactive modeling. Further, a combined primal-dual surface representation enables us to robustly and quickly solve approximation problems.

  18. Replication of micro and nano surface geometries

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard; Hocken, R.J.; Tosello, Guido

    2011-01-01

    : manufacture of net-shape micro/nano surfaces, tooling (i.e. master making), and surface quality control (metrology, inspection). Replication processes and methods as well as the metrology of surfaces to determine the degree of replication are presented and classified. Examples from various application areas...... are given including replication for surface texture measurements, surface roughness standards, manufacture of micro and nano structured functional surfaces, replicated surfaces for optical applications (e.g. optical gratings), and process chains based on combinations of repeated surface replication steps....

  19. Innovative Deterministic Optical Surface Finishing Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Increasing the optical surface finishing precision and reducing surface roughness will greatly benefit astronomy telescope and other optical systems. Conventional...

  20. Monitoring surface conditions of a Thoroughbred racetrack.

    Science.gov (United States)

    Clanton, C; Kobluk, C; Robinson, R A; Gordon, B

    1991-02-15

    During a pilot study at a Thoroughbred racetrack, information was collected to include weather conditions and track surface properties (moisture content, composition, strength, and coefficient of friction between surface and hoof). Measured weather variables did not correlate to any pattern of horse injuries of breakdowns. Surface moisture content was variable, whereas the moisture content of the compacted cushion was constant. Track surfaces around the starting chutes were more compacted than were other areas of the track. Next to the rail, track surface was softer than the surface toward the middle of the track. The coefficient of friction between a hoof and the surface was not affected by location or surface moisture content.

  1. Surface modification to prevent oxide scale spallation

    Science.gov (United States)

    Stephens, Elizabeth V; Sun, Xin; Liu, Wenning; Stevenson, Jeffry W; Surdoval, Wayne; Khaleel, Mohammad A

    2013-07-16

    A surface modification to prevent oxide scale spallation is disclosed. The surface modification includes a ferritic stainless steel substrate having a modified surface. A cross-section of the modified surface exhibits a periodic morphology. The periodic morphology does not exceed a critical buckling length, which is equivalent to the length of a wave attribute observed in the cross section periodic morphology. The modified surface can be created using at least one of the following processes: shot peening, surface blasting and surface grinding. A coating can be applied to the modified surface.

  2. Advanced Technologies for Determination of Surface Cleanliness

    Science.gov (United States)

    Kudlacek, Jan; Chabera, Petr

    2014-12-01

    For high utility value of products is significant quality of surface treatment. Among the processes that most affect the quality of surface treatment are mainly surface pretreatment processes, namely processes of cleaning (degreasing). This article is devoted to quality control after surface pre-treatment. It mainly deals with the modern method for detecting surface contamination grease based on fluorescence methods. Impurities such as grease, oil and other have characteristic fluorescence after illumination by UV source. This principle can be used to determine the purity of the substrate surface, thereby ensuring the quality of the surface. Surface cleanliness is very important factor for the correct application of subsequent technological processes.

  3. Collaboration Meets Interactive Surfaces (CMIS)

    DEFF Research Database (Denmark)

    Anslow, Craig; Campos, Pedro; Grisoni, Laurent

    2015-01-01

    This workshop proposes to bring together researchers who are interested in improving collaborative experiences through the combination of multiple interaction surfaces with diverse sizes and formats, ranging from large-scale walls, to tables, mobiles, and wearables. The opportunities for innovati...

  4. Critical behavior of collapsing surfaces

    DEFF Research Database (Denmark)

    Olsen, Kasper; Sourdis, C.

    2009-01-01

    We consider the mean curvature evolution of rotationally symmetric surfaces. Using numerical methods, we detect critical behavior at the threshold of singularity formation resembling that of gravitational collapse. In particular, the mean curvature simulation of a one-parameter family of initial...

  5. Nitrogen interactions at metal surfaces

    NARCIS (Netherlands)

    Gleeson, M. A.; Kleyn, A. W.

    2013-01-01

    Molecular beam experiments with specially prepared beams allow the study of the interaction of very reactive species with surfaces. In the present case the interaction of N-atoms with Ag(1 1 1) is studied. The energy of the atoms is around 5 eV, precisely between the classical energy regimes of seed

  6. Quantitative Characterisation of Surface Texture

    DEFF Research Database (Denmark)

    De Chiffre, Leonardo; Lonardo, P.M.; Trumpold, H.

    2000-01-01

    This paper reviews the different methods used to give a quantitative characterisation of surface texture. The paper contains a review of conventional 2D as well as 3D roughness parameters, with particular emphasis on recent international standards and developments. It presents new texture...

  7. Hydrophobic patches on protein surfaces

    NARCIS (Netherlands)

    Lijnzaad, P.

    2007-01-01

    Hydrophobicity is a prime determinant of the structure and function of proteins. It is the driving force behind the folding of soluble proteins, and when exposed on the surface, it is frequently involved in recognition and binding of ligands and other proteins. The energetic cost of exposing hydroph

  8. Minimal Surfaces for Hitchin Representations

    DEFF Research Database (Denmark)

    Li, Qiongling; Dai, Song

    2016-01-01

    Given a reductive representation $\\rho: \\pi_1(S)\\rightarrow G$, there exists a $\\rho$-equivariant harmonic map $f$ from the universal cover of a fixed Riemann surface $\\Sigma$ to the symmetric space $G/K$ associated to $G$. If the Hopf differential of $f$ vanishes, the harmonic map is then minimal...

  9. Surface meshing with curvature convergence

    KAUST Repository

    Li, Huibin

    2014-06-01

    Surface meshing plays a fundamental role in graphics and visualization. Many geometric processing tasks involve solving geometric PDEs on meshes. The numerical stability, convergence rates and approximation errors are largely determined by the mesh qualities. In practice, Delaunay refinement algorithms offer satisfactory solutions to high quality mesh generations. The theoretical proofs for volume based and surface based Delaunay refinement algorithms have been established, but those for conformal parameterization based ones remain wide open. This work focuses on the curvature measure convergence for the conformal parameterization based Delaunay refinement algorithms. Given a metric surface, the proposed approach triangulates its conformal uniformization domain by the planar Delaunay refinement algorithms, and produces a high quality mesh. We give explicit estimates for the Hausdorff distance, the normal deviation, and the differences in curvature measures between the surface and the mesh. In contrast to the conventional results based on volumetric Delaunay refinement, our stronger estimates are independent of the mesh structure and directly guarantee the convergence of curvature measures. Meanwhile, our result on Gaussian curvature measure is intrinsic to the Riemannian metric and independent of the embedding. In practice, our meshing algorithm is much easier to implement and much more efficient. The experimental results verified our theoretical results and demonstrated the efficiency of the meshing algorithm. © 2014 IEEE.

  10. Fitting Surfaces to Scattered Data

    Science.gov (United States)

    1976-01-01

    triangularizations of the same region) . Moreover, as the fig- ure shows, some triangularizations are superior to others in the sense that they exhibit...Internazionale Sulle Applicazione dell Analisi alia Fisica Matematica (Cagliari-Sassari, 1964), 11-21. 59. Coons, S. A., Surface patches and B-spline

  11. Surface Modification of Catalytic Materials

    DEFF Research Database (Denmark)

    Nierhoff, Anders Ulrik Fregerslev

    aggregation techniques. With the use of two different filter mechanisms, the Quadrupole and the Lateral Time Of Flight, the nanoparticles were mass selected. This was done to correlate nanoparticle size with reactivity. Selected key findings can be summarized as: 1) CO induced surface changes of Pt based...

  12. Surface gradients under electrochemical control

    NARCIS (Netherlands)

    Krabbenborg, Sven Olle

    2014-01-01

    Gradients are systems in which the physicochemical properties of a solution and/or surface change gradually in space and/or time. They are used for a myriad of technological and biological applications, for example for high-throughput screening, or for the investigation of biological systems. The de

  13. Surface-emitting laser logic

    Energy Technology Data Exchange (ETDEWEB)

    Olbright, G.R.; Bryan, R.P.; Brennan, T.M.; Lear, K.; Poirier, G.E.; Fu, W.S. (Sandia National Labs., Albuquerque, NM (USA)); Jewell, J.L.; Lee, Y.H. (AT and T Bell Labs., Holmdel, NJ (USA))

    1990-10-31

    We describe a new class of optical logic devices which consist of integrated phototransistors and surface-emitting lasers. The devices function as optical neurons having high gain and, as arrays, are ideal for neural networks, parallel optical signal processing and optical computing applications. 3 refs., 3 figs.

  14. Equivalence problem for Bishop surfaces

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The paper has two parts. We first briefly survey recent studies on the equivalence problem for real submanifolds in a complex space under the action of biholomorphic transformations. We will mainly focus on some of the recent studies of Bishop surfaces, which, in particular, includes the work of the authors. In the second part of the paper, we apply the general theory developed by the authors to explicitly classify an algebraic family of Bishop surfaces with a vanishing Bishop invariant. More precisely, we let M be a real submanifold of C 2 defined by an equation of the form w = zz + 2Re(z s + az s+1 ) with s≥ 3 and a a complex parameter. We will prove in the second part of the paper that for s≥ 4 two such surfaces are holomorphically equivalent if and only if the parameter differs by a certain rotation. When s = 3, we show that surfaces of this type with two different real parameters are not holomorphically equivalent.

  15. Modeling for Standoff Surface Detection

    Science.gov (United States)

    2013-11-01

    Start Digi ” button (Figure 6) starts the Acqiris digitizer, and clicking on the “Stop Digi ” button stops the digitizer. The flow chart (Figure 7) shows...the algorithm used to collect data during this process. When the operator clicks the “Start Digi ” button, the Surface Detect software has a

  16. Surface magnetization of siderite mineral

    Institute of Scientific and Technical Information of China (English)

    Wu; Xiqing; Xu; Pengyun; Duan; Yunfeng; Hu; Cong; Li; Guoping

    2012-01-01

    Surface self-magnetization of siderite is achieved by generating ferromagnetic substance on the surface of siderite by adjusting slurry temperature,pH value,stirring rate and reaction time.No addition of any iron-containing reagent is required.The temperature of 60 ℃,NaOH concentration of 0.10 mol/L;stirring rate of 900 r/min and the reaction time of 10 min are the optimal conditions.The results show that the siderite recovery in magnetic separation increased from 26.9% to 88.8% after surface magnetization.Magnetization kinetic equation is expressed as 1 [1(e0.269)]1/3 = Kt.Activation energy for the magnetization reaction is 4.30 kJ/mol.VSM,SEM and XPS were used to characterize the siderite,and results show that the saturated magnetization(rs) of siderite increased from 0.652 to 2.569Am2 /kg,the magnetic hysteresis was detected with a coercive force of 0.976 A/m after magnetization;Fe2P3/2 electron binding energy changed which reflects the valence alteration in iron on the surface and the formation of ferromagnetic Fe3O4.

  17. Nitrogen interactions at metal surfaces

    NARCIS (Netherlands)

    Gleeson, M. A.; Kleyn, A. W.

    2013-01-01

    Molecular beam experiments with specially prepared beams allow the study of the interaction of very reactive species with surfaces. In the present case the interaction of N-atoms with Ag(1 1 1) is studied. The energy of the atoms is around 5 eV, precisely between the classical energy regimes of seed

  18. Einstein Metrics on Complex Surfaces

    CERN Document Server

    Lebrun, C

    1995-01-01

    We consider compact complex surfaces with Hermitian metrics which are Einstein but not Kaehler. It is shown that the manifold must be CP2 blown up at 1,2, or 3 points, and the isometry group of the metric must contain a 2-torus. Thus the Page metric on CP2#(-CP2) is almost the only metric of this type.

  19. White Light Interferometric Surface Profiler

    OpenAIRE

    Toal, Vincent; Bowe, Brian

    1998-01-01

    We describe an optical system for 3-D profilometry based on the white light interferometer. We detail a simple way to construct a profiler that uses two simple algorithms which deal efficiently and quickly with the data. The system has a theoretically unlimited range and can deal with rough and smooth surfaces

  20. Nonlinear surface waves over topography

    NARCIS (Netherlands)

    Janssen, T.T.

    2006-01-01

    As ocean surface waves radiate into shallow coastal areas and onto beaches, their lengths shorten, wave heights increase, and the wave shape transforms from nearsinusoidal to the characteristic saw-tooth shapes at the onset of breaking; in the ensuing breaking process the wave energy is cascaded to

  1. Complementary magnetic localized surface plasmons

    CERN Document Server

    Gao, Zhen; Zhang, Youming; Zhang, Baile

    2015-01-01

    Magnetic localized surface plasmons (LSPs) supported on metallic structures corrugated by very long and curved grooves have been recently proposed and demonstrated on an extremely thin metallic spiral structure (MSS) in the microwave regime. However, the mode profile for the magnetic LSPs was demonstrated by measuring only the electric field, not the magnetic field.

  2. Symplectic Applicability of Lagrangian Surfaces

    Directory of Open Access Journals (Sweden)

    Lorenzo Nicolodi

    2009-06-01

    Full Text Available We develop an approach to affine symplectic invariant geometry of Lagrangian surfaces by the method of moving frames. The fundamental invariants of elliptic Lagrangian immersions in affine symplectic four-space are derived together with their integrability equations. The invariant setup is applied to discuss the question of symplectic applicability for elliptic Lagrangian immersions. Explicit examples are considered.

  3. Nitrogen interactions at metal surfaces

    NARCIS (Netherlands)

    Gleeson, M.A.; Kleijn, A.W.

    2013-01-01

    Molecular beam experiments with specially prepared beams allow the study of the interaction of very reactive species with surfaces. In the present case the interaction of N-atoms with Ag(1 1 1) is studied. The energy of the atoms is around 5 eV, precisely between the classical energy regimes of

  4. Temperature dependence of surface nanobubbles

    NARCIS (Netherlands)

    Berkelaar, R.P.; Seddon, James Richard Thorley; Zandvliet, Henricus J.W.; Lohse, Detlef

    2012-01-01

    The temperature dependence of nanobubbles was investigated experimentally using atomic force microscopy. By scanning the same area of the surface at temperatures from 51 °C to 25 °C it was possible to track geometrical changes of individual nanobubbles as the temperature was decreased.

  5. Microstructured Surfaces for Enhanced Transmission

    DEFF Research Database (Denmark)

    Ivinskaya, Aliaksandra; Bergmann, René; Kafka, Jan Robert;

    2014-01-01

    Binary microstructures are used to increase transmission of silicon (Si) surfaces in the infrared (IR) range. We consider hexagonal and square lattices with square and round pillars with the finitedifference frequency-domain (FDFD) method. In agreement with theory and previous publications, the h...

  6. Multichannel analysis of surface waves

    Science.gov (United States)

    Park, C.B.; Miller, R.D.; Xia, J.

    1999-01-01

    The frequency-dependent properties of Rayleigh-type surface waves can be utilized for imaging and characterizing the shallow subsurface. Most surface-wave analysis relies on the accurate calculation of phase velocities for the horizontally traveling fundamental-mode Rayleigh wave acquired by stepping out a pair of receivers at intervals based on calculated ground roll wavelengths. Interference by coherent source-generated noise inhibits the reliability of shear-wave velocities determined through inversion of the whole wave field. Among these nonplanar, nonfundamental-mode Rayleigh waves (noise) are body waves, scattered and nonsource-generated surface waves, and higher-mode surface waves. The degree to which each of these types of noise contaminates the dispersion curve and, ultimately, the inverted shear-wave velocity profile is dependent on frequency as well as distance from the source. Multichannel recording permits effective identification and isolation of noise according to distinctive trace-to-trace coherency in arrival time and amplitude. An added advantage is the speed and redundancy of the measurement process. Decomposition of a multichannel record into a time variable-frequency format, similar to an uncorrelated Vibroseis record, permits analysis and display of each frequency component in a unique and continuous format. Coherent noise contamination can then be examined and its effects appraised in both frequency and offset space. Separation of frequency components permits real-time maximization of the S/N ratio during acquisition and subsequent processing steps. Linear separation of each ground roll frequency component allows calculation of phase velocities by simply measuring the linear slope of each frequency component. Breaks in coherent surface-wave arrivals, observable on the decomposed record, can be compensated for during acquisition and processing. Multichannel recording permits single-measurement surveying of a broad depth range, high levels of

  7. Options for acetabular fixation surfaces.

    Science.gov (United States)

    Klika, Alison K; Murray, Trevor G; Darwiche, Hussein; Barsoum, Wael K

    2007-01-01

    Aseptic loosening is the most common cause for revision total hip arthroplasty (THA). Due to poor long-term results with cemented acetabular components, cementless implants that rely on biologic fixation became popular in the United States for both primary and revision procedures in the early 1980s. Cementless acetabular components used in THA have been reported to have superior radiographic performance compared with cemented fixation, although the optimal method of acetabular fixation remains controversial. Cementless acetabular components require initial implant stability to allow for bone ingrowth and remodeling into the acetabular shell, providing long-term durability of the prosthesis. Many improved implant materials are available to facilitate bone growth and remodeling, including the 3 most common surface treatments; fibermesh, sintered beads, and plasma spray coatings. Recently added to these are porous metal surfaces, which have increased porosity and optimal pore sizes when compared with titanium fibermesh. The most studied of these materials is the titanium fibermesh fixation surface, which has demonstrated a mechanical failure rate of 1% at 10 to 15 years. This technology utilizes the diffusion bonding process to attach fiber metal pads to a titanium substrate using heat and pressure. The sintered bead fixation surface offers a porous coating of various sizes of spherical beads, achieved by the sintering process, and has been shown to provide long-term fixation. While there are less long-term published data regarding the titanium plasma spray surface, its early results have provided evidence of its durability, even in the face of significant osteolysis. The most recently added alternative fixation surface is porous tantalum metal, which offers potentially greater bone ingrowth and bone graft incorporation due to its high porosity (80%) and low modulus of elasticity (3 MPa). Porous tantalum implants have shown early favorable clinical results and have

  8. Surface characterization of platinum electrodes.

    Science.gov (United States)

    Solla-Gullón, José; Rodríguez, Paramaconi; Herrero, Enrique; Aldaz, Antonio; Feliu, Juan M

    2008-03-14

    The quantitative analysis of the different surface sites on platinum samples is attempted from pure voltammetric data. This analysis requires independent knowledge of the fraction of two-dimensional (111) and (100) domains. Specific site-probe reactions are employed to achieve this goal. Irreversibly-adsorbed bismuth and tellurium have been revealed to be sensitive to the presence of (111) terrace domains of different width whereas almost all sites involved in (100) ordered domains have been characterized through germanium adatoms. The experimental protocol follows that used with well-defined single-crystal electrodes and, therefore, requires careful control of the surface cleanliness. Platinum basal planes and their vicinal stepped surfaces have been employed to obtain calibration plots between the charge density measured under the adatom redox peak, specific for the type of surface site, and the corresponding terrace size. The evaluation of the (100) bidimensional domains can also be achieved using the voltammetric profiles, once the fraction of (111) ordered domains present in the polyoriented platinum has been determined and their featureless contribution has been subtracted from the whole voltammetric response. Using that curve, it is possible to perform a deconvolution of the adsorption states of the polycrystalline sample different from those related to (111) domains. The fraction of (100)-related states in the deconvoluted voltammogram can then be compared to that expected from the independent estimation coming from the charge involved in the redox process undergone by the irreversibly-adsorbed germanium and thus check the result of the deconvolution. The information about the surface-site distribution can also be applied to analyze the voltammetric profile of nanocrystalline platinum electrodes.

  9. Surface magnetism of strontium titanate

    Science.gov (United States)

    Coey, J. M. D.; Venkatesan, M.; Stamenov, P.

    2016-12-01

    SrTiO3 plays a central role in oxide electronics. It is the substrate of choice for functional oxide heterostructures based on perovskite-structure thin-film stacks, and its surface or interface with a polar oxide such as LaAlO3 can become a 2D conductor because of electronic reconstruction or the presence of oxygen defects. Inconsistent reports of magnetic order in SrTiO3 abound in the literature. Here, we report a systematic experimental study aimed at establishing how and when SrTiO3 can develop a magnetic moment at room temperature. Polished (1 0 0), (1 1 0) or (1 1 1) crystal slices from four different suppliers are characterized before and after vacuum annealing at 750 °C, both in single-crystal and powdered form. Impurity content is analysed at the surface and in the bulk. Besides the underlying intrinsic diamagnetism of SrTiO3, magnetic signals are of three types—a Curie law susceptibility due to dilute magnetic impurities at the ppm level, a hysteretic temperature-dependent ferromagnetic impurity contribution, and a practically anhysteretic defect-related temperature-independent component that saturates in about 200 mT. The latter component is intrinsic. It is often the largest, reaching 10 μ B nm-2 of the surface area or more and dominating the magnetic response in low fields at room temperature. It is associated with defects near the surface, and can be destroyed by treatment with Tiron (C6H4Na2O8S2), an electron donor molecule that forms a strong complex with titanium at the surface. The origin of this unusual high-temperature ferromagnetic-like response is discussed.

  10. On real structures on rigid surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Kulikov, Vik S [Steklov Mathematical Institute, Russian Academy of Sciences (Russian Federation); Kharlamov, V M [Institut de Recherche Matematique Avanee Universite Louis Pasteur et CNRS 7 rue Rene Descartes (France)

    2002-02-28

    We construct examples of rigid surfaces (that is, surfaces whose deformation class consists of a unique surface) with a particular behaviour with respect to real structures. In one example the surface has no real structure. In another it has a unique real structure, which is not maximal with respect to the Smith-Thom inequality. These examples give negative answers to the following problems: the existence of real surfaces in each deformation class of complex surfaces, and the existence of maximal real surfaces in every complex deformation class that contains real surfaces. Moreover, we prove that there are no real surfaces among surfaces of general type with p{sub g}=q=0 and K{sup 2}=9. These surfaces also provide new counterexamples to the 'Dif = Def' problem.

  11. Selective Surface Modification on Lubricant Retention

    Science.gov (United States)

    Jiang, Yu; Suvanto, Mika; Pakkanen, Tapani A.

    2016-11-01

    While surface patterns are effective in improving tribological properties, nevertheless they alter the surface wettability, which will in turn affect the surface-lubricant interactions. When there is a shortage of lubricant on a patterned surface, the lubricant stored inside the cavities will be extracted to compensate the surface lubricant dissipation. Additionally, the lubricant retention effect provided by the cavities is competing with the release of the lubricant. With weak surface-lubricant interaction, the retention is limited. Therefore, the lubrication will have a sudden failure, giving a dramatic transition to abrasive wear. To improve the performance of polar lubricants on hydrophobic polymer surfaces, both topographical and selective surface modifications were incorporated on injection molded polypropylene surfaces. Distinctive lubrication improvement was observed when the surface structure density for the lubricant storage was high, and the release of the lubricant was controlled by the interaction with the selectively modified surfaces.

  12. Silicon surface structure-controlled oleophobicity.

    Science.gov (United States)

    Liu, Yan; Xiu, Yonghao; Hess, Dennis W; Wong, C P

    2010-06-01

    Superoleophobic surfaces display contact angles >150 degrees with liquids that have lower surface energies than does water. The design of superoleophobic surfaces requires an understanding of the effect of the geometrical shape of etched silicon surfaces on the contact angle and hysteresis observed when different liquids are brought into contact with these surfaces. This study used liquid-based metal-assisted etching and various silane treatments to create superoleophobic surfaces on a Si(111) surface. Etch conditions such as the etch time and etch solution concentration played critical roles in establishing the oleophobicity of Si(111). When compared to Young's contact angle, the apparent contact angle showed a transition from a Cassie to a Wenzel state for low-surface-energy liquids as different silane treatments were applied to the silicon surface. These results demonstrated the relationship between the re-entrant angle of etched surface structures and the contact angle transition between Cassie and Wenzel behavior on etched Si(111) surfaces.

  13. Surface Split Decompositions and Subgraph Isomorphism in Graphs on Surfaces

    CERN Document Server

    Bonsma, Paul

    2011-01-01

    The Subgraph Isomorphism problem asks, given a host graph G on n vertices and a pattern graph P on k vertices, whether G contains a subgraph isomorphic to P. The restriction of this problem to planar graphs has often been considered. After a sequence of improvements, the current best algorithm for planar graphs is a linear time algorithm by Dorn (STACS '10), with complexity $2^{O(k)} O(n)$. We generalize this result, by giving an algorithm of the same complexity for graphs that can be embedded in surfaces of bounded genus. At the same time, we simplify the algorithm and analysis. The key to these improvements is the introduction of surface split decompositions for bounded genus graphs, which generalize sphere cut decompositions for planar graphs. We extend the algorithm for the problem of counting and generating all subgraphs isomorphic to P, even for the case where P is disconnected. This answers an open question by Eppstein (SODA '95 / JGAA '99).

  14. Surface/Surface Intersection Using Simulated Annealing Genetic Algorithm

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The genetic algorithm and marching method are integrated into a novel algorithm to solve the surface intersection problem. By combining genetic algorithm with local searching method the efficiency of evolution is greatly improved. By fully utilizing the global searching ability and instinct attribute for parallel computation of genetic algorithm and the local rapid convergency of marching method, the algorithm can compute the intersection robustly and generate correct topology of intersection curves. The details of the new algorithm are discussed here.

  15. Decay of viscous surface waves without surface tension

    CERN Document Server

    Guo, Yan

    2010-01-01

    Consider a viscous fluid of finite depth below the air. In the absence of the surface tension effect at the air-fluid interface, the long time behavior of a free surface with small amplitude has been an intriguing question since the work of Beale \\cite{beale_1}. In this monograph, we develop a new mathematical framework to resolve this question. If the free interface is horizontally infinite, we establish that it decays to a flat surface at an algebraic rate. On the other hand, if the free interface is periodic, we establish that it decays at an almost exponential rate, i.e. at an arbitrarily fast algebraic rate determined by the smallness of the data. Our framework contains several novel techniques, which include: (1) a local well-posed theory of the Navier-Stokes equations in the presence of a moving boundary; (2) a two-tier energy method that couples the boundedness of high-order energy to the decay of low-order energy, the latter of which is necessary to balance out the growth of the highest derivatives o...

  16. The international surface temperature initiative's global land surface databank

    Science.gov (United States)

    Lawrimore, J. H.; Rennie, J.; Gambi de Almeida, W.; Christy, J.; Flannery, M.; Gleason, B.; Klein-Tank, A.; Mhanda, A.; Ishihara, K.; Lister, D.; Menne, M. J.; Razuvaev, V.; Renom, M.; Rusticucci, M.; Tandy, J.; Thorne, P. W.; Worley, S.

    2013-09-01

    The International Surface Temperature Initiative (ISTI) consists of an end-to-end process for land surface air temperature analyses. The foundation is the establishment of a global land surface Databank. This builds upon the groundbreaking efforts of scientists in the 1980s and 1990s. While using many of their principles, a primary aim is to improve aspects including data provenance, version control, openness and transparency, temporal and spatial coverage, and improved methods for merging disparate sources. The initial focus is on daily and monthly timescales. A Databank Working Group is focused on establishing Stage-0 (original observation forms) through Stage-3 data (merged dataset without quality control). More than 35 sources of data have already been added and efforts have now turned to development of the initial version of the merged dataset. Methods have been established for ensuring to the extent possible the provenance of all data from the point of observation through all intermediate steps to final archive and access. Databank submission procedures were designed to make the process of contributing data as easy as possible. All data are provided openly and without charge. We encourage the use of these data and feedback from interested users.

  17. Ultrafast Imaging of Surface Plasmons Propagating on a Gold Surface

    Energy Technology Data Exchange (ETDEWEB)

    Gong, Yu; Joly, Alan G.; Hu, Dehong; El-Khoury, Patrick Z.; Hess, Wayne P.

    2015-05-13

    We record time-resolved nonlinear photoemission electron microscopy (tr-PEEM) images of propagating surface plasmons (PSPs) launched from a lithographically patterned rectangular trench on a flat gold surface. Our tr-PEEM scheme involves a pair of identical, spatially separated, and interferometrically-locked femtosecond laser pulses. Power dependent PEEM images provide experimental evidence for a sequential coherent nonlinear photoemission process, in which one laser source creates a PSP polarization state through a linear interaction, and the second subsequently probes the prepared state via two photon photoemission. The recorded time-resolved movies of a PSP allow us to directly measure various properties of the surface-bound wave packet, including its carrier wavelength (785 nm) and group velocity (0.95c). In addition, tr-PEEM in concert with finite-difference time domain simulations together allow us to set a lower limit of 75 μm for the decay length of the PSP on a 100 nm thick gold film.

  18. Drag force and surface roughness measurements on freshwater biofouled surfaces.

    Science.gov (United States)

    Andrewartha, J; Perkins, K; Sargison, J; Osborn, J; Walker, G; Henderson, A; Hallegraeff, G

    2010-05-01

    The detrimental effect of biofilms on skin friction for near wall flows is well known. The diatom genera Gomphonema and Tabellaria dominated the biofilm mat in the freshwater open channels of the Tarraleah Hydropower Scheme in Tasmania, Australia. A multi-faceted approach was adopted to investigate the drag penalty for biofouled 1.0 m x 0.6 m test plates which incorporated species identification, drag measurement in a recirculating water tunnel and surface characterisation using close-range photogrammetry. Increases in total drag coefficient of up to 99% were measured over clean surface values for biofouled test plates incubated under flow conditions in a hydropower canal. The effective roughness of the biofouled surfaces was found to be larger than the physical roughness; the additional energy dissipation was caused in part by the vibration of the biofilms in three-dimensions under flow conditions. The data indicate that there was a roughly linear relationship between the maximum peak-to-valley height of a biofilm and the total drag coefficient.

  19. Determination of retinal surface area.

    Science.gov (United States)

    Nagra, Manbir; Gilmartin, Bernard; Thai, Ngoc Jade; Logan, Nicola S

    2017-09-01

    Previous attempts at determining retinal surface area and surface area of the whole eye have been based upon mathematical calculations derived from retinal photographs, schematic eyes and retinal biopsies of donor eyes. 3-dimensional (3-D) ocular magnetic resonance imaging (MRI) allows a more direct measurement, it can be used to image the eye in vivo, and there is no risk of tissue shrinkage. The primary purpose of this study is to compare, using T2-weighted 3D MRI, retinal surface areas for superior-temporal (ST), inferior-temporal (IT), superior-nasal (SN) and inferior-nasal (IN) retinal quadrants. An ancillary aim is to examine whether inter-quadrant variations in area are concordant with reported inter-quadrant patterns of susceptibility to retinal breaks associated with posterior vitreous detachment (PVD). Seventy-three adult participants presenting without retinal pathology (mean age 26.25 ± 6.06 years) were scanned using a Siemens 3-Tesla MRI scanner to provide T2-weighted MR images that demarcate fluid-filled internal structures for the whole eye and provide high-contrast delineation of the vitreous-retina interface. Integrated MRI software generated total internal ocular surface area (TSA). The second nodal point was used to demarcate the origin of the peripheral retina in order to calculate total retinal surface area (RSA) and quadrant retinal surface areas (QRSA) for ST, IT, SN, and IN quadrants. Mean spherical error (MSE) was -2.50 ± 4.03D and mean axial length (AL) 24.51 ± 1.57 mm. Mean TSA and RSA for the RE were 2058 ± 189 and 1363 ± 160 mm(2) , respectively. Repeated measures anova for QRSA data indicated a significant difference within-quadrants (P area/mm increase in AL. Although the differences between QRSAs are relatively small, there was evidence of concordance with reported inter-quadrant patterns of susceptibility to retinal breaks associated with PVD. The data allow AL to be converted to QRSAs, which will assist further

  20. A phased antenna array for surface plasmons

    NARCIS (Netherlands)

    Dikken, D.J.W.; Korterik, J.P.; Segerink, F.B.; Herek, J.L.; Prangsma, Jord C.

    2016-01-01

    Surface plasmon polaritons are electromagnetic waves that propagate tightly bound to metal surfaces. The concentration of the electromagnetic field at the surface as well as the short wavelength of surface plasmons enable sensitive detection methods and miniaturization of optics. We present an optic