WorldWideScience

Sample records for surface transportation safety

  1. Transportation safety training

    Energy Technology Data Exchange (ETDEWEB)

    Jones, E.

    1990-01-01

    Over the past 25 years extensive federal legislation involving the handling and transport of hazardous materials/waste has been passed that has resulted in numerous overlapping regulations administered and enforced by different federal agencies. The handling and transport of hazardous materials/waste involves a significant number of workers who are subject to a varying degree of risk should an accident occur during handling or transport. Effective transportation training can help workers address these risks and mitigate them, and at the same time enable ORNL to comply with the federal regulations concerning the transport of hazardous materials/waste. This presentation will outline how the Environmental and Health Protection Division's Technical Resources and Training Section at the Oak Ridge National Laboratory, working with transportation and waste disposal personnel, have developed and implemented a comprehensive transportation safety training program to meet the needs of our workers while satisfying appropriate federal regulations. 8 refs., 3 tabs.

  2. Safety Analysis Report for the KRI-ASM Transport Package

    Energy Technology Data Exchange (ETDEWEB)

    Bang, K. S.; Lee, J. C.; Kim, D. H.; Seo, K. S

    2006-10-15

    Safety evaluation for the KRI-ASM transport package to transport safely I-131, which is produced at HANARO research reactor in KAERI, was carried out. In the safety analyses results for the KRI-ASM transport package, all the maximum stresses as well as the maximum temperature of the surface are lower than their allowable limits. The safety tests to verify the safety analyses results will be performed by using the test model of the KRI-BGM transport package.

  3. Safety in the Transport Sector

    DEFF Research Database (Denmark)

    Jørgensen, Kirsten

    2012-01-01

    In EU the transport sector has an incident rate of accidents at work at 40 pr 1000 employees. The Danish insurance company CODAN has insured a big part of this sector concerning transport of gods on shore. The purpose of the project is to document the safety problems in the sector and to develop......, unloading or work with transport equipment carried out at many different work places. The main safety problems are falls, heavy lifting, poor ergonomic working conditions, hits or collisions with gods, equipments or falling objects, the traffic risk situations, work with animals and finally the risk...... of violence and robbery. The transport branch is characterized by many small enterprises of which 97% of the enterprises in Denmark have less than 50 employees and 89% have less than 10 employees. The intervention in 5 small enterprises show a relevant focus on both the risk for occupational accidents...

  4. Manpower analysis in transportation safety. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, C.S.; Bowden, H.M.; Colford, C.A.; DeFilipps, P.J.; Dennis, J.D.; Ehlert, A.K.; Popkin, H.A.; Schrader, G.F.; Smith, Q.N.

    1977-05-01

    The project described provides a manpower review of national, state and local needs for safety skills, and projects future manning levels for transportation safety personnel in both the public and private sectors. Survey information revealed that there are currently approximately 121,000 persons employed directly in transportation safety occupations within the air carrier, highway and traffic safety, motor carrier, pipeline, rail carrier, and marine carrier transportation industry groups. The projected need for 1980 is over 145,000 of which over 80 percent will be in highway safety. An analysis of transportation tasks is included, and shows ten general categories about which the majority of safety activities are focused. A skills analysis shows a generally high level of educational background and several years of experience are required for most transportation safety jobs. An overall review of safety programs in the transportation industry is included, together with chapters on the individual transportation modes.

  5. 76 FR 50312 - Surface Transportation Environment and Planning Cooperative Research Program (STEP)

    Science.gov (United States)

    2011-08-12

    ... transportation safety planning strategies for surface transportation systems and improvements; (5) Improving... Federal Highway Administration Surface Transportation Environment and Planning Cooperative Research...-LU) established the Surface Transportation Environment and Planning Cooperative Research Program...

  6. 75 FR 38605 - Surface Transportation Environment and Planning Cooperative Research Program (STEP)

    Science.gov (United States)

    2010-07-02

    ... research to address congestion reduction efforts; (4) Developing transportation safety planning strategies... Federal Highway Administration Surface Transportation Environment and Planning Cooperative Research...-LU) established the Surface Transportation Environment and Planning Cooperative Research Program...

  7. Road safety issues for bus transport management.

    Science.gov (United States)

    Cafiso, Salvatore; Di Graziano, Alessandro; Pappalardo, Giuseppina

    2013-11-01

    Because of the low percentage of crashes involving buses and the assumption that public transport improves road safety by reducing vehicular traffic, public interest in bus safety is not as great as that in the safety of other types of vehicles. It is possible that less attention is paid to the significance of crashes involving buses because the safety level of bus systems is considered to be adequate. The purpose of this study was to evaluate the knowledge and perceptions of bus managers with respect to safety issues and the potential effectiveness of various technologies in achieving higher safety standards. Bus managers were asked to give their opinions on safety issues related to drivers (training, skills, performance evaluation and behaviour), vehicles (maintenance and advanced devices) and roads (road and traffic safety issues) in response to a research survey. Kendall's algorithm was used to evaluate the level of concordance. The results showed that the majority of the proposed items were considered to have great potential for improving bus safety. The data indicated that in the experience of the participants, passenger unloading and pedestrians crossing near bus stops are the most dangerous actions with respect to vulnerable users. The final results of the investigation showed that start inhibition, automatic door opening, and the materials and internal architecture of buses were considered the items most strongly related to bus passenger safety. Brake assistance and vehicle monitoring systems were also considered to be very effective. With the exception of driver assistance systems for passenger and pedestrian safety, the perceptions of the importance of other driver assistance systems for vehicle monitoring and bus safety were not unanimous among the bus company managers who participated in this survey. The study results showed that the introduction of new technologies is perceived as an important factor in improving bus safety, but a better understanding

  8. Surface Transportation: Watercraft

    Science.gov (United States)

    2007-11-02

    Cardiopulmonary resuscitation (CPR). (3) Ensuring the recommended surgical equipment, instruments , and supplies are maintained on board. (4) Remaining...diseases. (6) Remaining familiar with DH MEDICO (Medical advice by radio) procedures. Familiar with emergency station bill procedures. b. Must be...AR 215–1 Morale, Welfare, and Recreation Activities and Nonappropriated Fund Instrumentalities . AR 385–10 The Army Safety Program. AR 500–60 Disaster

  9. 41 CFR 50-204.75 - Transportation safety.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 1 2010-07-01 2010-07-01 true Transportation safety. 50... Transportation Safety § 50-204.75 Transportation safety. Any requirements of the U.S. Department of Transportation under 49 CFR Parts 171-179 and Parts 390-397 and 14 CFR Part 103 shall be applied...

  10. RISK MANAGEMENT AS TRANSPORTATION SAFETY PROVISION INSTRUMENT IN RUSSIA

    Directory of Open Access Journals (Sweden)

    V. A. Nikolayev

    2012-01-01

    Full Text Available Safety of transportation in Russia is subject to a variety of threats. Discussed in the article are characteristics of major threats to transportation security. State transportation policy directions that make it possible to ensure the security of cargo and passenger transportation are shown. A listof activities and innovative risk management tools that provide for improved safety of railway transportation is proposed.

  11. 78 FR 53790 - Public Forum-Safety Culture: Enhancing Transportation Safety

    Science.gov (United States)

    2013-08-30

    ... Culture; Organizational Leadership Perspectives on Safety Culture; Safety Culture Management and Oversight... effective safety cultures within their industries. There will also be a review of some recent organizational... SAFETY BOARD Public Forum--Safety Culture: Enhancing Transportation Safety On Tuesday and...

  12. Summary of Federal Aviation Administration Responses to National Transportation Safety Board Safety Recommendations.

    Science.gov (United States)

    1981-07-01

    investigation) Ji:) National Transportation Safety Board "ty bo ’* 1.a ,’ ", lon.DC 20594 Office of the Chairman May 27, 1980 Honorable Langhorne Bond...Charles E. Weithoner Acting Administrator Enclosure A National Transportation Safety Board 1 1 Bo Washmglton.D C 20594 Office of the Chairman October 21...KING, Chairman, MADAMS , ROGUE, and DRIVER, Members, concurred in the above recoumendations. , B g DEPARTMENT OF TRANSPORTATION FEDERAL AVIATION

  13. SAFETY AND QUALITY CONTROL OF TRANSPORT SERVICES ON RAILWAY TRANSPORT

    Directory of Open Access Journals (Sweden)

    I. P. Sadlovska

    2010-10-01

    Full Text Available The article presents the provisions to improve procedure of licensing of passenger and freight transportation, technical specifications for services related to the passenger and freight transportations.

  14. Radionuclide transport report for the safety assessment SR-Site

    Energy Technology Data Exchange (ETDEWEB)

    2010-12-15

    This document compiles radionuclide transport calculations of a KBS-3 repository for the safety assessment SR-Site. The SR-Site assessment supports the licence application for a final repository at Forsmark, Sweden

  15. DOE/DOE Tight Oil Flammability & Transportation Spill Safety

    Energy Technology Data Exchange (ETDEWEB)

    Lord, David L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-12-01

    This presentation describes crude oils, their phase behavior, the SPR vapor pressure program, and presents data comparisons from various analytical techniques. The overall objective is to describe physical properties of crude oil relevant to flammability and transport safety

  16. Surface transport in plasma-balls

    CERN Document Server

    Armas, Jay; Kundu, Nilay

    2015-01-01

    We study the surface transport properties of stationary localized configurations of relativistic fluids to the first two non-trivial orders in a derivative expansion. By demanding that these finite lumps of relativistic fluid are described by a thermal partition function with arbitrary stationary background metric and gauge fields, we are able to find several constraints among surface transport coefficients. At leading order, besides recovering the surface thermodynamics, we obtain a generalization of the Young-Laplace equation for relativistic fluid surfaces, by considering a temperature dependence in the surface tension, which is further generalized in the context of superfluids. At the next order, for uncharged fluids in 3+1 dimensions, we show that besides the 3 independent bulk transport coefficients previously known, a generic localized configuration is characterized by 3 additional surface transport coefficients, one of which may be identified with the surface modulus of rigidity. Finally, as an applic...

  17. Radiation safety in sea transport of radioactive material in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Odano, N. [National Maritime Research Inst., Tokyo (Japan); Yanagi, H. [Nuclear Fuel Transport Co., Ltd., Tokyo (Japan)

    2004-07-01

    Radiation safety for sea transport of radioactive material in Japan has been discussed based on records of the exposed dose of sea transport workers and measured data of dose rate equivalents distribution inboard exclusive radioactive material shipping vessels. Recent surveyed records of the exposed doses of workers who engaged in sea transport operation indicate that exposed doses of transport workers are significantly low. Measured distribution of the exposed dose equivalents inboard those vessels indicates that dose rate equivalents inside those vessels are lower than levels regulated by the transport regulations of Japan. These facts clarify that radiation safety of inboard environment and handling of transport casks in sea transport of radioactive material in Japan are assured.

  18. 76 FR 20070 - Commercial Space Transportation Safety Approval Performance Criteria

    Science.gov (United States)

    2011-04-11

    ... Federal Aviation Administration Commercial Space Transportation Safety Approval Performance Criteria... received, a safety approval for the ability of its Space Training System: Model 400 (STS-400) to replicate....19 (a)(4). NASTAR's ] STS-400 suborbital space flight simulator (a multi-axis centrifuge) is...

  19. Vacancy Transport and Interactions on Metal Surfaces

    Science.gov (United States)

    2014-03-06

    AFRL-OSR-VA-TR-2013-0317 VACANCY TRANSPORT AND INTERACTIONS ON METAL SURFACES Gert Ehrlich UNIVERSITY OF ILLINOIS CHAMPAIGN Final Report 03/06/2014...30, 2012 Gert Ehrlich , PI Abstract This proposal is a study of vacancy transport and vacancy interaction on metal surfaces. Adatom self...Trembułowicz, Gert Ehrlich , Grażyna Antczak,Surface diffusion of gold on quasihexagonal-reconstructed Au(100) ,Physical Review B 84 (2011) 245445-1

  20. Safety assessment of ammonia as a transport fuel

    DEFF Research Database (Denmark)

    Duijm, N.J.; Markert, Frank; Paulsen, Jette Lundtang

    2005-01-01

    of transport of ammonia to the refuelling stations and safety of the activities at the refuelling station (unloading and refuelling). Comparisons are made between the safety of using ammonia and the safety of otherexisting or alternative fuels. The conclusion is that the hazards in relation to ammonia need......This report describes the safety study performed as part of the EU supported project “Ammonia Cracking for Clean Electric Power Technology” The study addresses the following activities: safety of operation of the ammonia-powered vehicle under normal andaccident (collision) conditions, safety...... to be controlled by a combination of technical and regulatory measures. The most important requirements are: - Advanced safety systems in the vehicle -Additional technical measures and regulations are required to avoid releases in maintenance workshops and unauthorised maintenance on the fuel system. - Road...

  1. Active Transportation Safety Features around Schools in Canada

    Directory of Open Access Journals (Sweden)

    Bryn Pinkerton

    2013-10-01

    Full Text Available The purpose of this study was to describe the presence and quality of active transportation safety features in Canadian school environments that relate to pedestrian and bicycle safety. Variations in these features and associated traffic concerns as perceived by school administrators were examined by geographic status and school type. The study was based on schools that participated in 2009/2010 Health Behaviour in School-aged Children (HBSC survey. ArcGIS software version 10 and Google Earth were used to assess the presence and quality of ten different active transportation safety features. Findings suggest that there are crosswalks and good sidewalk coverage in the environments surrounding most Canadian schools, but a dearth of bicycle lanes and other traffic calming measures (e.g., speed bumps, traffic chokers. Significant urban/rural inequities exist with a greater prevalence of sidewalk coverage, crosswalks, traffic medians, and speed bumps in urban areas. With the exception of bicycle lanes, the active transportation safety features that were present were generally rated as high quality. Traffic was more of a concern to administrators in urban areas. This study provides novel information about active transportation safety features in Canadian school environments. This information could help guide public health efforts aimed at increasing active transportation levels while simultaneously decreasing active transportation injuries.

  2. Active transportation safety features around schools in Canada.

    Science.gov (United States)

    Pinkerton, Bryn; Rosu, Andrei; Janssen, Ian; Pickett, William

    2013-10-31

    The purpose of this study was to describe the presence and quality of active transportation safety features in Canadian school environments that relate to pedestrian and bicycle safety. Variations in these features and associated traffic concerns as perceived by school administrators were examined by geographic status and school type. The study was based on schools that participated in 2009/2010 Health Behaviour in School-aged Children (HBSC) survey. ArcGIS software version 10 and Google Earth were used to assess the presence and quality of ten different active transportation safety features. Findings suggest that there are crosswalks and good sidewalk coverage in the environments surrounding most Canadian schools, but a dearth of bicycle lanes and other traffic calming measures (e.g., speed bumps, traffic chokers). Significant urban/rural inequities exist with a greater prevalence of sidewalk coverage, crosswalks, traffic medians, and speed bumps in urban areas. With the exception of bicycle lanes, the active transportation safety features that were present were generally rated as high quality. Traffic was more of a concern to administrators in urban areas. This study provides novel information about active transportation safety features in Canadian school environments. This information could help guide public health efforts aimed at increasing active transportation levels while simultaneously decreasing active transportation injuries.

  3. Safety assessment of ammonia as a transport fuel

    Energy Technology Data Exchange (ETDEWEB)

    Duijm, N.J.; Markert, F.; Lundtang paulsen, Jette

    2005-02-01

    This report describes the safety study performed as part of the EU supported project 'Ammonia Cracking for Clean Electric Power Technology' The study addresses the following activities: safety of operation of the ammonia-powered vehicle under normal and accident (collision) conditions, safety of transport of ammonia to the refuelling stations and safety of the activities at the refuelling station (unloading and refuelling). Comparisons are made between the safety of using ammonia and the safety of other existing or alternative fuels. The conclusion is that the hazards in relation to ammonia need to be controlled by a combination of technical and regulatory measures. The most important requirements are: - Advanced safety systems in the vehicle - Additional technical measures and regulations are required to avoid releases in maintenance workshops and unauthorised maintenance on the fuel system - Road transport of ammonia to refuelling stations in refrigerated form - Sufficient safety zones between refuelling stations and residential or otherwise public areas. When these measures are applied, the use of ammonia as a transport fuel wouldnt cause more risks than currently used fuels (using current practice). (au)

  4. Intelligent Transport Systems (ITS) and road safety.

    NARCIS (Netherlands)

    2008-01-01

    Many developments are taking place in the area of Intelligent Transport Systems (ITS) for traffic purposes. Many of the current ITS applications are mainly aimed at increasing comfort while driving and at improving accessibility. In addition, systems like the alcolock and the seatbelt lock are being

  5. 76 FR 53999 - Safety Notice: Transportation of DOT Special Permit Packages in Commerce

    Science.gov (United States)

    2011-08-30

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration Safety Notice: Transportation of DOT Special Permit Packages in Commerce AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT....

  6. Safety analysis report for medical radioisotope transport cask

    Energy Technology Data Exchange (ETDEWEB)

    Seo, K. S.; Ku, J. H.; Lee, J. C. [Korea Atomic Energy Research Institute, Taejon (Korea)

    1999-10-01

    KAERI has been producing radioisotopes for medical and industrial use and supplying them to radioisotope-using hospitals and industries. RI transport cask of A type package has been developed to transport medical radioisotopes from the HANARO to the hospitals. The safety analyses were performed under normal transport conditions in accordance with standards of transport regulations. As a results, it should be verified that the cask maintains the shielding and structural integrities under prescribed condition by the regulations. 8 refs., 20 figs., 7 tabs. (Author)

  7. Surface transport in plasma-balls

    Energy Technology Data Exchange (ETDEWEB)

    Armas, Jay [Physique Théorique et Mathématique, Université Libre de Bruxelles andInternational Solvay Institutes,ULB-Campus Plaine CP231, B-1050 Brussels (Belgium); Bhattacharya, Jyotirmoy [Centre for Particle Theory & Department of Mathematical Sciences, Durham University,South Road, Durham DH1 3LE (United Kingdom); Kundu, Nilay [Harish-Chandra Research Institute,Chhatnag Road, Jhunsi, Allahabad 211019 (India)

    2016-06-06

    We study the surface transport properties of stationary localized configurations of relativistic fluids to the first two non-trivial orders in a derivative expansion. By demanding that these finite lumps of relativistic fluid are described by a thermal partition function with arbitrary stationary background metric and gauge fields, we are able to find several constraints among surface transport coefficients. At leading order, besides recovering the surface thermodynamics, we obtain a generalization of the Young-Laplace equation for relativistic fluid surfaces, by considering a temperature dependence in the surface tension, which is further generalized in the context of superfluids. At the next order, for uncharged fluids in 3+1 dimensions, we show that besides the 3 independent bulk transport coefficients previously known, a generic localized configuration is characterized by 3 additional surface transport coefficients, one of which may be identified with the surface modulus of rigidity. Finally, as an application, we study the effect of temperature dependence of surface tension on some explicit examples of localized fluid configurations, which are dual to certain non-trivial black hole solutions via the AdS/CFT correspondence.

  8. Surface transport in plasma-balls

    Science.gov (United States)

    Armas, Jay; Bhattacharya, Jyotirmoy; Kundu, Nilay

    2016-06-01

    We study the surface transport properties of stationary localized configurations of relativistic fluids to the first two non-trivial orders in a derivative expansion. By demanding that these finite lumps of relativistic fluid are described by a thermal partition function with arbitrary stationary background metric and gauge fields, we are able to find several constraints among surface transport coefficients. At leading order, besides recovering the surface thermodynamics, we obtain a generalization of the Young-Laplace equation for relativistic fluid surfaces, by considering a temperature dependence in the surface tension, which is further generalized in the context of superfluids. At the next order, for uncharged fluids in 3+1 dimensions, we show that besides the 3 independent bulk transport coefficients previously known, a generic localized configuration is characterized by 3 additional surface transport coefficients, one of which may be identified with the surface modulus of rigidity. Finally, as an application, we study the effect of temperature dependence of surface tension on some explicit examples of localized fluid configurations, which are dual to certain non-trivial black hole solutions via the AdS/CFT correspondence.

  9. Safety of high speed magnetic levitation transportation systems. Preliminary safety review of the transrapid maglev system

    Science.gov (United States)

    Dorer, R. M.; Hathaway, W. T.

    1990-11-01

    The safety of various magnetically levitated trains under development for possible implementation in the United States is of direct concern to the Federal Railroad Administration. Safety issues are addressed related to a specific maglev technology. The Transrapid maglev system was under development by the German Government over the last 10 to 15 years and was evolved into the current system with the TR-07 vehicle. A technically based safety review was under way over the last year by the U.S. Department of Transportation. The initial results of the review are presented to identify and assess potential maglev safety issues.

  10. Safety analysis report for packaging (onsite) sample pig transport system

    Energy Technology Data Exchange (ETDEWEB)

    MCCOY, J.C.

    1999-03-16

    This Safety Analysis Report for Packaging (SARP) provides a technical evaluation of the Sample Pig Transport System as compared to the requirements of the U.S. Department of Energy, Richland Operations Office (RL) Order 5480.1, Change 1, Chapter III. The evaluation concludes that the package is acceptable for the onsite transport of Type B, fissile excepted radioactive materials when used in accordance with this document.

  11. Safety And Reduce In Pollution Issues For Inland Waterway Transportation

    Directory of Open Access Journals (Sweden)

    Van Huong Dong

    2015-08-01

    Full Text Available According to the Ministry of Transport inland water transport is one of the five modes of transport in our country play a very important role. Inland waterway transport not only plays a major role in transporting large volumes of goods and passengers but also creates millions of jobs contributing to ensuring social security and national defense and security. However there are still many inadequacies in waterway transportation such as unequal waterway traffic The phenomenon of exploitation of river resources as planned or Process technology is not as planned exploitation of sand gravel etc. are common in most rivers and canals in the country. The signaling system is not synchronized between the signal of the inland waterway management unit and the signal of the owner The handling of domestic goods transportation and inland port management is inadequate The force of the means of development is fast uneven but concentrated in some urban areas and industrial parks. Therefore the Ministry of Transport has proposed a scheme to facilitate the development of a synchronized inland waterway infrastructure linking with other modes of transport To improve the capacity of the crew and the inland waterway transport crews. To create favorable conditions for inland waterway transportation business with reasonable transportation costs Improve the quality of water transport services Ensure safety and environmental friendliness Make a distinct advantage over other modes of transport. Specifically will develop promulgate mechanisms The policy is to facilitate the development of inland waterway infrastructure Build and promulgate mechanism The policy of supporting the development of the fleet has a reasonable structure with a fleet of about 30 self-propelled ships accounting for about 70 of the total number of inland waterway vessels To prioritize the development of the container fleet Inland waterway transportation and training retraining of human resources for

  12. Fire safety of LPG in marine transportation

    Energy Technology Data Exchange (ETDEWEB)

    Martinsen, W.E.; Johnson, D.W.; Welker, J.R.

    1980-08-01

    This report contains an analytical examination of cargo spill and fire hazard potential associated with the marine handling of liquefied petroleum gas (LPG) as cargo. Principal emphasis was on cargo transfer operations for ships unloading at receiving terminals, and barges loading or unloading at a terminal. Major safety systems, including emergency shutdown systems, hazard detection systems, and fire extinguishment and control systems were included in the analysis. Spill probabilities were obtained from fault tree analyses utilizing composite LPG tank ship and barge designs. Failure rates for hardware in the analyses were generally taken from historical data on similar generic classes of hardware, there being very little historical data on the specific items involved. Potential consequences of cargo spills of various sizes are discussed and compared to actual LPG vapor cloud incidents. The usefulness of hazard mitigation systems (particularly dry chemical fire extinguishers and water spray systems) in controlling the hazards posed by LPG spills and spill fires is also discussed. The analysis estimates the probability of fatality for a terminal operator is about 10/sup -6/ to 10/sup -5/ per cargo transfer operation. The probability of fatality for the general public is substantially less.

  13. 77 FR 69899 - Public Conference on Geographic Information Systems (GIS) in Transportation Safety

    Science.gov (United States)

    2012-11-21

    ... SAFETY BOARD Public Conference on Geographic Information Systems (GIS) in Transportation Safety The National Transportation Safety Board will hold a public conference on the use of the Geographic Information Systems (GIS) in transportation safety on December 4-5, 2012. GIS is a rapidly expanding group...

  14. The safety of radioactive materials transport; La surete des transports de matieres radioactives

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    The rule of the radioactive materials transport contains two different objectives: the safety, or physical protection, consists in preventing the losses, the disappearances, the thefts and the diversions of the nuclear materials (useful materials for weapons); the high civil servant of defence near the Minister of Economy, Finance and Industry is the responsible authority; the safety consists in mastering the risks of irradiation, contamination and criticality presented by the radioactive and fissile materials transport, in order that man and environment do not undergo the nuisances. The control of the safety is within the competence of the Asn. (N.C.)

  15. Impact of Vehicular Communications Security on Transportation Safety

    CERN Document Server

    Papadimitratos, Panos; Hubaux, Jean-Pierre; Lioy, Antonio

    2008-01-01

    Transportation safety, one of the main driving forces of the development of vehicular communication (VC) systems, relies on high-rate safety messaging (beaconing). At the same time, there is consensus among authorities, industry, and academia on the need to secure VC systems. With specific proposals in the literature, a critical question must be answered: can secure VC systems be practical and satisfy the requirements of safety applications, in spite of the significant communication and processing overhead and other restrictions security and privacy-enhancing mechanisms impose? To answer this question, we investigate in this paper the following three dimensions for secure and privacy-enhancing VC schemes: the reliability of communication, the processing overhead at each node, and the impact on a safety application. The results indicate that with the appropriate system design, including sufficiently high processing power, applications enabled by secure VC can be in practice as effective as those enabled by uns...

  16. Road Safety Audit RSA : best practice guidelines, qualification for auditors and 'programming'. Deliverable D4 of the RiPCORD-iSEREST project (Road Infrastructure Safety Protection - Core-Research and Development for Road Safety in Europe; Increasing safety and reliability of secondary roads for a sustainable Surface Transport).

    NARCIS (Netherlands)

    Matena, S. Weber, R. Huber, C.A. Hruby, Z. Pokorny, P. Gaitanidou, E. Vaneerdewegh, P. Strnad, B. Cardoso, J. Schermers, G. & Elvik, R.

    2009-01-01

    This report contains 'best practice' guidelines for road safety audits (RSA) and summarises practices which have been successfully applied in European countries or abroad. The goals of this report are to inform the reader on the reasons why carrying out audits is beneficial and how to successfully c

  17. Road Safety Audit RSA : best practice guidelines, qualification for auditors and 'programming'. Deliverable D4 of the RiPCORD-iSEREST project (Road Infrastructure Safety Protection - Core-Research and Development for Road Safety in Europe; Increasing safety and reliability of secondary roads for a sustainable Surface Transport).

    NARCIS (Netherlands)

    Matena, S. Weber, R. Huber, C.A. Hruby, Z. Pokorny, P. Gaitanidou, E. Vaneerdewegh, P. Strnad, B. Cardoso, J. Schermers, G. & Elvik, R.

    2009-01-01

    This report contains 'best practice' guidelines for road safety audits (RSA) and summarises practices which have been successfully applied in European countries or abroad. The goals of this report are to inform the reader on the reasons why carrying out audits is beneficial and how to successfully

  18. Road Safety Audit RSA : best practice guidelines, qualification for auditors and 'programming'. Deliverable D4 of the RiPCORD-iSEREST project (Road Infrastructure Safety Protection - Core-Research and Development for Road Safety in Europe; Increasing safety and reliability of secondary roads for a sustainable Surface Transport).

    NARCIS (Netherlands)

    Matena, S. Weber, R. Huber, C.A. Hruby, Z. Pokorny, P. Gaitanidou, E. Vaneerdewegh, P. Strnad, B. Cardoso, J. Schermers, G. & Elvik, R.

    2009-01-01

    This report contains 'best practice' guidelines for road safety audits (RSA) and summarises practices which have been successfully applied in European countries or abroad. The goals of this report are to inform the reader on the reasons why carrying out audits is beneficial and how to successfully c

  19. Aspheric surface testing by irradiance transport equation

    Science.gov (United States)

    Shomali, Ramin; Darudi, Ahmad; Nasiri, Sadollah; Asgharsharghi Bonab, Armir

    2010-10-01

    In this paper a method for aspheric surface testing is presented. The method is based on solving the Irradiance Transport Equation (ITE).The accuracy of ITE normally depends on the amount of the pick to valley of the phase distribution. This subject is investigated by a simulation procedure.

  20. Magnetic Flux Transport at the Solar Surface

    CERN Document Server

    Jiang, J; Cameron, R H; Solanki, S K; Gizon, L; Upton, L

    2014-01-01

    After emerging to the solar surface, the Sun's magnetic field displays a complex and intricate evolution. The evolution of the surface field is important for several reasons. One is that the surface field, and its dynamics, sets the boundary condition for the coronal and heliospheric magnetic fields. Another is that the surface evolution gives us insight into the dynamo process. In particular, it plays an essential role in the Babcock-Leighton model of the solar dynamo. Describing this evolution is the aim of the surface flux transport model. The model starts from the emergence of magnetic bipoles. Thereafter, the model is based on the induction equation and the fact that after emergence the magnetic field is observed to evolve as if it were purely radial. The induction equation then describes how the surface flows -- differential rotation, meridional circulation, granular, supergranular flows, and active region inflows -- determine the evolution of the field (now taken to be purely radial). In this paper, we...

  1. INFLUENCE OF SEDIMENT TRANSPORT ON ARMORED SURFACES

    Institute of Scientific and Technical Information of China (English)

    Katinka KOLL; Andreas DITTRICH

    2001-01-01

    Laboratory experiments have been carried out to study the characteristics of sediment transport in steep streams. The question is discussed wether an armoured surfaces is destroyed due to the transport of material, because additional impulses are acting on it, or the layer is sheltered by the transported material, because a part of the stream power is used to move the material. According to the results of the presented experiments, in which the influence of the feeding rate and the feeding duration have been investigated, transported material reaching an armoured river section from upstream always remobilzes bed material, which is immobile under clear water flow conditions. To decide if a static armour layer is either destroyed or not, two simple criteria were chosen: oneconsidering the grain-size distribution of the eroded bed material, and another, which referes to the amount of eroded bed material.

  2. Safety in the on shore transport sector for SME enterprises

    DEFF Research Database (Denmark)

    Jørgensen, Kirsten

    2013-01-01

    In EU the transport sector has an incident rate of accidents at work at 40 per 1000 employees. The Danish insurance company CODAN has insured a big part of this sector concerning transport of goods on shore. The transport branch is characterized by many small enterprises of which 97 % of the ente......In EU the transport sector has an incident rate of accidents at work at 40 per 1000 employees. The Danish insurance company CODAN has insured a big part of this sector concerning transport of goods on shore. The transport branch is characterized by many small enterprises of which 97...... % of the enterprises in Denmark have less than 50 employees and 89 % have less than 10 employees. The purpose of the project is to document the safety problems in the sector and to develop a strategy for a preventive intervention in transport enterprises through making successes in 6 enterprises by an intervention...... or falling objects, the traffic risk situations, work with animals and finally the risk of violence and robbery. The intervention is carried out in 6 SME transport enterprises over a three year period, beginning spring 2011. The intervention is organized together with the employers and follows their plan...

  3. Safety and Health Perceptions in Work-related Transport Activities in Ghanaian Industries

    Directory of Open Access Journals (Sweden)

    Charles Atombo

    2017-06-01

    Conclusion: OSH culture is not fully complied in industries transport activities. This study, therefore, supports the use of safety seminars and training sessions for industry workers responsible for transport operations for better integration of safety standards.

  4. Hanford Site Wide Transportation Safety Document [SEC 1 Thru 3

    Energy Technology Data Exchange (ETDEWEB)

    MCCALL, D L

    2002-06-01

    This safety evaluation report (SER) documents the basis for the US Department of Energy (DOE), Richland Operations Office (RL) to approve the Hanford Sitewide Transportation Safety Document (TSD) for onsite Transportation and Packaging (T&P) at Hanford. Hanford contractors, on behalf of DOE-RL, prepared and submitted the Hanford Sitewide Transportation Safety Document, DOE/RL-2001-0036, Revision 0, (DOE/RL 2001), dated October 4, 2001, which is referred to throughout this report as the TSD. In the context of the TSD, Hanford onsite shipments are the activities of moving hazardous materials, substances, and wastes between DOE facilities and over roadways where public access is controlled or restricted and includes intra-area and inter-area movements. The TSD sets forth requirements and standards for onsite shipment of radioactive and hazardous materials and wastes within the confines of the Hanford Site on roadways where public access is restricted by signs, barricades, fences, or other means including road closures and moving convoys controlled by Hanford Site security forces.

  5. 78 FR 61251 - The National Public Transportation Safety Plan, the Public Transportation Agency Safety Plan, and...

    Science.gov (United States)

    2013-10-03

    ... use quantitative measures to measure and evaluate safety performance. Types of data that some agencies... electronic comments and other data to http://www.regulations.gov . U.S. Mail: Send comments to Docket... definition of state of good repair developed through the implementation of the National TAM System; (3) a...

  6. Radioactive wastes transport. A safety logic; Le transport des dechets radioactifs. Une logique de surete

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    The safety principle which applies to transport operations of radioactive wastes obeys to a very strict regulation. For the conditioning of wastes in package, the organisation of shipments and the qualification of carriers, the ANDRA, the French national agency of radioactive wastes, has implemented a rigorous policy based on the respect of a quality procedure and on the mastery of delivery fluxes. This brochure presents in a simple, illustrated and detailed manner the different steps of these transports. (J.S.)

  7. Turbulent transport in the atmospheric surface layer

    Energy Technology Data Exchange (ETDEWEB)

    Tagesson, Torbern [Dept. of Physical Geography and Ecosystem Science, Lund Univ., Lund (Sweden)

    2012-04-15

    In the modelling of transport and accumulation of the radioactive isotope carbon-14 (C-14) in the case of a potential release from a future repository of radioactive waste, it is important to describe the transport of the isotope in the atmosphere. This report aims to describe the turbulent transport within the lower part of the atmosphere; the inertial surface layer and the roughness sublayer. Transport in the inertial surface layer is dependent on several factors, whereof some can be neglected under certain circumstances. Under steady state conditions, fully developed turbulent conditions, in flat and horizontal homogeneous areas, it is possible to apply an eddy diffusivity approach for estimating vertical transport of C. The eddy diffusivity model assumes that there is proportionality between the vertical gradient and the transport of C. The eddy diffusivity is depending on the atmospheric turbulence, which is affected by the interaction between mean wind and friction of the ground surface and of the sensible heat flux in the atmosphere. In this report, it is described how eddy diffusivity of the inertial surface layer can be estimated from 3-d wind measurements and measurements of sensible heat fluxes. It is also described how to estimate the eddy diffusivity in the inertial surface layer from profile measurements of temperature and wind speed. Close to the canopy, wind and C profiles are influenced by effects of the surface roughness; this section of the atmosphere is called the roughness sublayer. Its height is up to {approx}3 times the height of the plant canopy. When the mean wind interacts with the canopy, turbulence is not only produced by shear stress and buoyancy, it is additionally created by wakes, which are formed behind the plants. Turbulence is higher than it would be over a flat surface, and the turbulent transport is hereby more efficient. Above the plant canopy, but still within the roughness sublayer, a function that compensates for the effect

  8. Turbulent transport in the atmospheric surface layer

    Energy Technology Data Exchange (ETDEWEB)

    Tagesson, Torbern [Dept. of Physical Geography and Ecosystem Science, Lund Univ., Lund (Sweden)

    2012-04-15

    In the modelling of transport and accumulation of the radioactive isotope carbon-14 (C-14) in the case of a potential release from a future repository of radioactive waste, it is important to describe the transport of the isotope in the atmosphere. This report aims to describe the turbulent transport within the lower part of the atmosphere; the inertial surface layer and the roughness sublayer. Transport in the inertial surface layer is dependent on several factors, whereof some can be neglected under certain circumstances. Under steady state conditions, fully developed turbulent conditions, in flat and horizontal homogeneous areas, it is possible to apply an eddy diffusivity approach for estimating vertical transport of C. The eddy diffusivity model assumes that there is proportionality between the vertical gradient and the transport of C. The eddy diffusivity is depending on the atmospheric turbulence, which is affected by the interaction between mean wind and friction of the ground surface and of the sensible heat flux in the atmosphere. In this report, it is described how eddy diffusivity of the inertial surface layer can be estimated from 3-d wind measurements and measurements of sensible heat fluxes. It is also described how to estimate the eddy diffusivity in the inertial surface layer from profile measurements of temperature and wind speed. Close to the canopy, wind and C profiles are influenced by effects of the surface roughness; this section of the atmosphere is called the roughness sublayer. Its height is up to {approx}3 times the height of the plant canopy. When the mean wind interacts with the canopy, turbulence is not only produced by shear stress and buoyancy, it is additionally created by wakes, which are formed behind the plants. Turbulence is higher than it would be over a flat surface, and the turbulent transport is hereby more efficient. Above the plant canopy, but still within the roughness sublayer, a function that compensates for the effect

  9. The transport safety of radioactive matters; La surete des transports des matieres radioactives

    Energy Technology Data Exchange (ETDEWEB)

    Landier, D.; Louet, Ch.A.; Robert, Ch. [Autorite de Surete Nucleaire, 75 - Paris (France); Binet, J. [Commission europeenne, DG Energie et transports, Bruxelles (Belgium); Malesys, P. [TN International, 75 - Paris (France); Pourade, C. [Societe Dangexpress, 78 - St Remy l' Honore (France); Le Meur, A.; Robert, M. [Societe Nationale des Chemins de fer Francais, 75 - Paris (France); Turquet de Beauregard, G.Y.; Hello, E. [CIS bio, 91 - Gif sur Yvette (France); Laumond, A. [Electricite de France (EDF), 75 - Paris (France); Regnault, Ph.; Gourlay, M. [AREVA NC, 78 - Velizy Villacoublay (France); Bruhl, G. [CEA Fontenay-aux-Roses, Dir. de la Protection et de la Surete Nucleaire, 92 (France); Malvache, P.; Dumesnil, J. [CEA Saclay, Dir. de l' Energie Nucleaire (DEN), 91 - Gif sur Yvette (France); Cohen, B. [Agence Nationale pour la Gestion des Dechets Radioactifs (ANDRA), 92 - Chatenay Malabry (France); Sert, G. [Institut de Radioprotection et de Surete Nucleaire (IRSN), 92 - Clamart (France); Pain, M. [Ministere de l' Interieur, et de l' Amenagement du Territoire, Dir. de la Defense et la Securite Civiles, 75 - Paris (France); Green, L.; Hartenstein, M. [World Nuclear Transport Institute, London (United Kingdom); Stewart, J. [Ministere des Transport, Royaume Uni (United Kingdom); Cottens, E.; Liebens, M. [Agence Federale de Controle Nucleaire (Belgium); Marignac, Y. [Wise, 75 - Paris (France)

    2007-02-15

    Since the control of transport of radioactive materials was given to A.S.N. 10 years ago, A.S.N. has strengthened the radioactive material transport inspections, in particular of the designers, manufacturers, carriers and consignors. A.S.N. has implemented INES scale for incidents during transport. It has participated as much as possible to IAEA working groups in order to improve the international regulatory framework. And, supported by I.R.S.N., A.S.N. has performed a periodic safety review of existing package models and has approved new models incorporating innovative design features. Finally, A.S.N. has tested its emergency responses to procedures to an accident involving the transport of radioactive materials. All these actions taken together have led to improvement in and reinforcement of the safety culture among the transport operators; this has been acknowledged by a recent audit T.R.A.N.S.A.S. performed by IAEA. In spite of all these actions, there are not approved by the competent authority. As A.S.N. is in charge of every field in radioprotection, this should help to intensify the control. In addition, the different kinds of transport are also tackled as rail transport with S.N.C.F. radiological risk training, air transport through nuclear medicine. Some experience feedback are given such radioactive waste transport to the storage facilities in the Aube or how to protect the population after a nuclear transport incident with the O.R.S.E.C.-T.M.S. plans. (N.C.)

  10. 29 CFR 1926.902 - Surface transportation of explosives.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Surface transportation of explosives. 1926.902 Section 1926... Explosives § 1926.902 Surface transportation of explosives. (a) Transportation of explosives shall meet the... Carriers. (b) Motor vehicles or conveyances transporting explosives shall only be driven by, and be in the...

  11. Safety standards of electrical equipment in surface mines. [USSR

    Energy Technology Data Exchange (ETDEWEB)

    Zhidkov, V.O.; Il' in, Yu.N.; Neyaskin, D.V.

    1985-03-01

    Modified safety regulations developed by the VostNII Institute are discussed. The safety regulations for electrical equipment used in surface coal mines are modifications of general safety regulations in coal surface mining. The modified regulations cover: improved protection from short circuits and grounds in electrical systems with voltage higher than 1000 V, protection systems for heavy-duty electric motors and motors with thyristor control, operation of power shovels on benches with contact systems (hazards of damage to electric cables caused by moving mining equipment), operation of electrical equipment and contact systems on benches at which trucks are used for mine haulage (hazards of damage to electric cables by moving trucks).

  12. 49 CFR 209.501 - Review of rail transportation safety and security route analysis.

    Science.gov (United States)

    2010-10-01

    ... route analysis. 209.501 Section 209.501 Transportation Other Regulations Relating to Transportation....820 § 209.501 Review of rail transportation safety and security route analysis. (a) Review of route analysis. If the Associate Administrator for Safety determines that a railroad carrier's route selection...

  13. 28 CFR 97.20 - Standards to ensure the safety of violent prisoners during transport.

    Science.gov (United States)

    2010-07-01

    ... prisoners during transport. 97.20 Section 97.20 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED... safety of violent prisoners during transport. Companies covered under this section must comply with applicable State and federal laws that govern the safety of violent prisoners during transport. In...

  14. Safety Education. A Guide To Help Prevent Accidents Associated with the Home, Student Transportation, Disasters, Pedestrians, Passengers, Fires, Consumerism, Recreation.

    Science.gov (United States)

    Texas Education Agency, Austin.

    This teacher's guide presents 10 instructional units for one portion of the Texas-approved course in driver and safety education. The units cover the following topics: what is safety?; accident causation and prevention; home safety; student transportation safety; disasters; pedestrian safety; passenger safety; fire safety; consumer safety; and…

  15. Intermodal safety research needs report of the sixth workshop on national transportation problems

    Energy Technology Data Exchange (ETDEWEB)

    Warshawer, A.J. (ed.)

    1976-04-01

    This conference brought together DOT policymakers, university principal investigators and other professionals to consider the intermodal safety research requirements of the Department of Transportation. The objectives of the conference were: (1) to highlight safety problems and needed transportation safety research identified by DOT modal safety managers and to stimulate university or university/industry teams to respond with research proposals which emphasize multi-modal applicability and a system view; and (2) to provide a forum for university research groups to inform DOT safety managers of promising new directions in transportation safety research and new tools with which to address safety related problems. The conference addressed the research requirements for safety as identified by the Statement of National Transportation Policy and by the modal safety managers in three principal contexts, each a workshop panel: I, Inter-Institutional Problems of Transportation Safety. Problems were described as: Federal-State, local; Federal-Industry; Federal-Public, Consumer groups. II, Goal Setting and Planning for Transportation Safety Programs. Issues were: modifying risk behavior, safety as a social value, and involving citizens in development of standards as a way of increasing probability of achieving program objectives. III, DOT Information, Management, and Evaluation Systems Requirements. Needs were: data requirements and analytic tools for management of safety programs.

  16. Safety analysis of surface haulage accidents

    Energy Technology Data Exchange (ETDEWEB)

    Randolph, R.F.; Boldt, C.M.K.

    1996-12-31

    Research on improving haulage truck safety, started by the U.S. Bureau of Mines, is being continued by its successors. This paper reports the orientation of the renewed research efforts, beginning with an update on accident data analysis, the role of multiple causes in these accidents, and the search for practical methods for addressing the most important causes. Fatal haulage accidents most often involve loss of control or collisions caused by a variety of factors. Lost-time injuries most often involve sprains or strains to the back or multiple body areas, which can often be attributed to rough roads and the shocks of loading and unloading. Research to reduce these accidents includes improved warning systems, shock isolation for drivers, encouraging seatbelt usage, and general improvements to system and task design.

  17. 32 CFR 861.4 - DOD air transportation quality and safety requirements.

    Science.gov (United States)

    2010-07-01

    ... § 861.4 DOD air transportation quality and safety requirements. (a) General. The DOD, as a customer of... number one company priority, and safety is never sacrificed to satisfy passenger concern, convenience,...

  18. Factors Of Environmental Safety And Environmentally Efficient Technologies Transportation Facilities Gas Transportation Industry

    Science.gov (United States)

    Vasiliev, Bogdan U.

    2017-01-01

    The stable development of the European countries depends on a reliable and efficient operation of the gas transportation system (GTS). With high reliability of GTS it is necessary to ensure its industrial and environmental safety. In this article the major factors influencing on an industrial and ecological safety of GTS are analyzed, sources of GTS safety decreasing is revealed, measures for providing safety are proposed. The article shows that use of gas-turbine engines of gas-compressor units (GCU) results in the following phenomena: emissions of harmful substances in the atmosphere; pollution by toxic waste; harmful noise and vibration; thermal impact on environment; decrease in energy efficiency. It is shown that for the radical problem resolution of an industrial and ecological safety of gas-transmission system it is reasonable to use gas-compressor units driven by electric motors. Their advantages are shown. Perspective technologies of these units and experience of their use in Europe and the USA are given in this article.

  19. Characterizing Surface Transport Barriers in the South China Sea

    Science.gov (United States)

    2015-09-30

    1 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Characterizing Surface Transport Barriers in the South...in mathematical methods for detecting key Lagrangian transport structures in velocity field data sets for spatially complex, time- dependent, ocean...surface flows. Such transport structures are typically not inherently obvious in snapshots of the Eulerian velocity field and require analysis

  20. Review of criteria for nuclear criticality safety control in transportation

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, J. T.; Smith, D. R.

    1978-01-01

    Basic elements in the review of criteria for nuclear criticality safety in transportation are the magnitudes of reactivity changes that may occur to a shipment of packages and those inherent in the regulatory procedure of assessment. The generic representation of criticality of reflected arrays of uncontained fissionable materials is used as a basis for comparison of packaged fissionable materials. The reactivities associated with array changes and perturbations representative of credible conditions that may occur in storage or transportation are summarized for air-spaced units of fissionable materials. Calculations of packaged fissionable material determined reactivities associated with similar changes to arrays of packages. Typical thermal insulating materials being studied are Celotex, wood, Foamglas, and a bonded vermiculite. The effect on the array neutron multiplication of these, with and without steel as an inner and outer container material, is examined. The present stage of the study has produced results illustrating the variable margin of subcriticality manifested by the criteria. Depending upon the packaging, mass loading and array reflector condition, the margin of subcriticality can be of the order of 1% in k/sub eff/.

  1. Maritime Transportation System Safety – Modeling and Identification

    Directory of Open Access Journals (Sweden)

    Przemyslaw Dziula

    2013-06-01

    Full Text Available The article is showing a concept of critical infrastructure systems’ safety states model. Model construction is basing on: popular technical systems’ safety states models, and notions specified in acts of law and other studies concerning crisis management. Paper is including some concept of proposed model usage possibilities - methods and procedures for estimating unknown basic parameters of safety states transitions process: identifying the distributions of its conditional lifetime at safety states, estimating probabilities of its staying at safety states at the initial moment, probabilities of its transitions between safety states and parameters of the distribution for the description of its conditional lifetimes at safety states.

  2. Retention mechanisms and the flow wetted surface - implications for safety analysis

    Energy Technology Data Exchange (ETDEWEB)

    Elert, M. [Kemakta Konsult AB, Stockholm (Sweden)

    1997-02-01

    The purpose of this report is to document the state-of-the-art concerning the flow wetted surface, its importance for radionuclide transport in the geosphere and review various suggestions on how to increase the present knowledge. Definitions are made of the various concepts used for the flow wetted surface as well as the various model parameters used. In the report methods proposed to assess the flow wetted surface are reviewed and discussed, tracer tests, tunnel and borehole investigations, geochemical studies, heat transport studies and theoretical modelling. Furthermore, a review is made of how the flow wetted surface has been treated in various safety analyses. Finally, an overall discussion with recommendations is presented, where it is concluded that at present no individual method for estimating the flow wetted surface can be selected that satisfies all requirements concerning giving relevant values, covering relevant distances and being practical to apply. Instead a combination of methods must be used. In the long-term research as well as in the safety assessment modelling focus should be put on assessing the ratio between flow wetted surface and water flux. The long-term research should address both the detailed flow within the fractures and the effective flow wetted surface along the flow paths. 55 refs.

  3. Application of ISO system to safety test for radioactive material transport package

    Energy Technology Data Exchange (ETDEWEB)

    Seo, K. S.; Lee, J. C.; Bang, K. S. [KAERI, Taejon (Korea, Republic of)

    2003-10-01

    Safety tests for radioactive material transportation package are described in MOST notice 2001-23, IAEA Safety Standards Series No. TS-R-1 and US 10 CFR Part 71. Safety test facilities and equipments were provided to be capable of performing various tests prescribed in those regulations. Test methods and procedures appropriate in International Standard ISO were established and this laboratory of radioactive material transportation package is accredited by Korea Laboratory Accreditation Scheme(KOLAS)

  4. Lagrangian Transport Through Surfaces in Volume-Preserving Flows

    CERN Document Server

    Karrasch, Daniel

    2015-01-01

    Advective transport of scalar quantities through surfaces is of fundamental importance in many scientific applications. From the Eulerian perspective of the surface it can be quantified by the well-known integral of the flux density. The recent development of highly accurate semi-Lagrangian methods for solving scalar conservation laws and of Lagrangian approaches to coherent structures in turbulent (geophysical) fluid flows necessitate a new approach to transport from the (Lagrangian) material perspective. We present a Lagrangian framework for calculating transport of conserved quantities through a given surface in $n$-dimensional, fully aperiodic, volume-preserving flows. Our approach does not involve any dynamical assumptions on the surface or its boundary.

  5. The Interface of Safety and Security in Transport: A Regional Perspective

    Energy Technology Data Exchange (ETDEWEB)

    Welch, Tim [ORNL; Duhamel, David A [ORNL; Nandakumar, A. N. [Mumbai, India; ParamiPhD, Vangeline K. [Philippine Nuclear Research Institute, Quezon City, Philippines; Bajwa, Christopher [International Atomic Energy Agency (IAEA); Shannon, Michael [International Atomic Energy Agency (IAEA)

    2016-01-01

    Security of nuclear and other radioactive material in transport continues to be a challenge for States that are working on strengthening their nuclear security regime. One reason for this is that State regulatory agencies and other organizations lack the resources and trained personnel to dedicate to this field. For over 50 years safety has been a major focus in the use, storage and transport of radioactive material. Only recently, since the late 1990s, has dedicated focus been given to the field of security. One way to assist States to advance nuclear security is to reach out to safety workers (regulators, inspectors, and safety compliance personnel) and showcase the need to better integrate safety and security practices. A recent IAEA regional workshop in Bangkok, Thailand (June 2015) yielded profound results when subject matter experts lectured on both the safety and the security of radioactive material in transport. These experts presented and discussed experiences and best practices for: 1) developing and implementing safety requirements and security recommendations for radioactive material in transport; 2) national and international cooperation; and 3) preventing shipment delays/denials of radioactive material. The workshop participants, who were predominantly from safety organizations, shared that they received the following from this event: 1. A clear understanding of the objectives of the IAEA safety requirements and security recommendations for radioactive material in transport. 2. A general understanding of and appreciation for the similarities and differences between safety requirements and security recommendations for radioactive material in transport. 3. A greater appreciation of the interface between transport safety and security and potential impacts of this interface on the efforts to strengthen the compliance assurance regime for the safe transport of radioactive material. 4. A general understanding of assessing the transport security scenarios

  6. Model for improving safety in transporting dangerous goods for the Serbian Army

    Directory of Open Access Journals (Sweden)

    Dragan S. Kostadinović

    2012-07-01

    Full Text Available Design and improvement of the safety of transport of dangerous goods is a multidimensional and dynamic process which can be implemented using several different methods and techniques. In defining the model of improving the safety of transport of dangerous goods for the purposes of the Serbian Army, the Deming's approach to quality management system has been used. The analysis of the existing organization of transport of dangerous goods in the Army of Serbia has established the basic causes that affect the reduction in security as well as specific measures to be taken to improve the safety of transport of dangerous goods in the Serbian Army. The benchmark concept, widely used in the world, especially among organizations dealing with the same kind of logistic services, has been applied to indentify measures to improve the safety of transport of dangerous goods in the Serbian Army.

  7. Surface Mine System Simulation and Safety Risk Management

    Institute of Scientific and Technical Information of China (English)

    ZHANG Rui-xin; YU Dong-fang; LI Xin-wang; YAO Xin-gang; LIU Yu

    2006-01-01

    Modern surface mines, either mono-system or multi-systems, need a large fleet of equipment consisting of excavators, loaders, haulers and auxiliary machines. Presently, the complexity of the system, the interference between sub-systems and the lag in management skills has been a bottle neck for improving productivity of the system. Based on the fact that the traditional tools for safety analysis have been insufficient to evaluate systematically and dynamically the safety risks, this paper tries to create a virtual reality tool consisting of human, machine and mines, using Pro/E and the 3D MAX software in order to evaluate visually the operations of typical mining equipment, such as the bucket wheel excavator (BWE), the shovel, the truck and the dragline. Within this virtual world, the behavior of the system, such as interaction, interference and potential risk can be replayed and reviewed visually. The objective of the study is to identify the critical safety issues of the system and to provide a convenient and powerful tool for safety training and safety management.

  8. Incorporating safety into surface haulage in the Powder River basin

    Energy Technology Data Exchange (ETDEWEB)

    Jeffery, W.; Jennings, C.

    1996-12-31

    The Powder River Basin (PRB) coal deposit extends from southeast Montana to northeast Wyoming. This paper describes a number of haulage practices and tools in use at several mines of the southern PRB and the way in which safety has been designed into and implemented for surface haulage of coal and overburden. Experiences described herein focus on the northeastern corner of Wyoming. All the mines in this area rely on safe and efficient movement of enormous volumes of material, and the results achieved in safety underscore the planning and attention to detail present in the PRB. There are currently 12 large surface mines (those greater than 10.0MM tons/year) operating in this area. In 1995, these mines produced over 230.0MM tons of coal.

  9. Surface-enhanced Raman spectroscopy applied to food safety.

    Science.gov (United States)

    Craig, Ana Paula; Franca, Adriana S; Irudayaraj, Joseph

    2013-01-01

    Surface-enhanced Raman spectroscopy (SERS) is an advanced Raman technique that enhances the vibrational spectrum of molecules adsorbed on or in the vicinity of metal particles and/or surfaces. Because of its readiness, sensitivity, and minimum sample preparation requirements, SERS is being considered as a powerful technique for food inspection. Key aspects of food-safety assurance, spectroscopy methods, and SERS are briefly discussed in an extended introduction of this review. The recent and potential advances in SERS are highlighted in sections that deal with the (a) detection of food-borne pathogenic microorganisms and (b) the detection of food contaminants and adulteration, concentrated specifically on antibiotics, drugs, hormones, melamine, and pesticides. This review provides an outlook of the work done and a perspective on the future directions of SERS as a reliable tool for food-safety assessment.

  10. Nonlinear Transport In Gases, Traps And Surfaces

    Science.gov (United States)

    Šuvakov, M.; Marjanovic, S.

    2010-07-01

    We will present our numerical study of three different charge transport processes and we will compare properties, specially the nonlinearity, of these processes. First process is electron transport in gases in swarm regime. We used well tested Monte Carlo techique to investigate kinetic phenomena such as negative diferencial conductivity (NDC) or negative apsolute mobility (NAM). We explain these phenomena analysing the spatial profiles of the swarm and collision events. In the second part we will apply the same technique on positron transport to obtain the same level of understanding of positron transport as has been achieved for electrons. The influence of positronium formation, non-conservative process, is much larger than any comparable effects in electron transport due to attachment and/or ionisation. As a result several new phenomena have been observed, such as NDC for the bulk drift velocity. Additionaly, the same Monte Carlo technique is used for modeling and optimisation of Surko like positron traps in different geometries and field configurations. Third process we studied is the charge transport under voltage bias via single-electron tunnelings through the junctions between metallic particles on nanoparticle films. We show how the regular nanoparticle array and topologically inhomogeneous nanonetworks affect the charge transport. We find long-range correlations in the time series of charge fluctuation at individual nanoparticles and of flow along the junctions within the network. These correlations explain the occurrence of a large non-linearity in the simulated and experimentally measured current-voltage characteristics and non-Gaussian fluctuations of the current at the electrode.

  11. Oil droplet self-transportation on oleophobic surfaces

    Science.gov (United States)

    Li, Juan; Qin, Qi Hang; Shah, Ali; Ras, Robin H. A.; Tian, Xuelin; Jokinen, Ville

    2016-01-01

    Directional liquid transportation is important for a variety of biological processes and technical applications. Although surface engineering through asymmetric chemical modification or geometrical patterning facilitates effective liquid manipulation and enables water droplet self-transportation on synthetic surfaces, self-transportation of oil droplets poses a major challenge because of their low surface tension. We report oil droplet self-transportation on oleophobic surfaces that are microtextured with radial arrays of undercut stripes. More significantly, we observe three modes of oil motion on various sample surfaces, namely, inward transportation, pinned, and outward spreading, which can be switched by the structure parameters, including stripe intersection angle and width. Accompanying theoretical modeling provides an in-depth mechanistic understanding of the structure–droplet motion relationship. Finally, we reveal how to optimize the texture parameters to maximize oil droplet self-transportation capability and demonstrate spontaneous droplet movement for liquids down to a surface tension of 22.4 mN/m. The surfaces presented here open up new avenues for power-free liquid transportation and oil contamination self-removal applications in various analytical and fluidic devices. PMID:27386574

  12. Structural and Thermal Safety Analysis Report for the Type B Radioactive Waste Transport Package

    Energy Technology Data Exchange (ETDEWEB)

    Kim, D. H.; Seo, K. S.; Lee, J. C.; Bang, K. S

    2007-09-15

    We carried out structural safety evaluation for the type B radioactive waste transport package. Requirements for type B packages according to the related regulations such as IAEA Safety Standard Series No. TS-R-1, Korea Most Act. 2001-23 and US 10 CFR Part 71 were evaluated. General requirements for packages such as those for a lifting attachment, a tie-down attachment and pressure condition were considered. For the type B radioactive waste transport package, the structural, thermal and containment analyses were carried out under the normal transport conditions. Also the safety analysis were conducted under the accidental transport conditions. The 9 m drop test, 1 m puncture test, fire test and water immersion test under the accidental transport conditions were consecutively done. The type B radioactive waste transport packages were maintained the structural and thermal integrities.

  13. Integration of safety in management tasks in onshore transport SME´s

    DEFF Research Database (Denmark)

    Jørgensen, Kirsten

    2015-01-01

    In EU, the transport sector has an incident rate of accidents at work of 40 per 1000 employees. The transport sector is characterized by many small enterprises of which 97% of the enterprises in Denmark have less than 50 employees and 89% have less than 10 employees. The safety problems...... for the employees are the activities carried out when loading, unloading or work with transport equipment carried out at many different work places. The main safety problems are falls, heavy lifting, poor ergonomic working conditions, hits or collisions with goods, falling objects, the traffic risk situations, work...... in the enterprise to have an understanding of safety and feel obligated to take responsibility for safety in all work at all times. Accident research shows that safety must be integrated in the whole enterprise and function on all levels of management, while it must also involve all employees in their daily work...

  14. Assessing the safety effects of cooperative intelligent transport systems: A bowtie analysis approach.

    Science.gov (United States)

    Ehlers, Ute Christine; Ryeng, Eirin Olaussen; McCormack, Edward; Khan, Faisal; Ehlers, Sören

    2017-02-01

    The safety effects of cooperative intelligent transport systems (C-ITS) are mostly unknown and associated with uncertainties, because these systems represent emerging technology. This study proposes a bowtie analysis as a conceptual framework for evaluating the safety effect of cooperative intelligent transport systems. These seek to prevent road traffic accidents or mitigate their consequences. Under the assumption of the potential occurrence of a particular single vehicle accident, three case studies demonstrate the application of the bowtie analysis approach in road traffic safety. The approach utilizes exemplary expert estimates and knowledge from literature on the probability of the occurrence of accident risk factors and of the success of safety measures. Fuzzy set theory is applied to handle uncertainty in expert knowledge. Based on this approach, a useful tool is developed to estimate the effects of safety-related cooperative intelligent transport systems in terms of the expected change in accident occurrence and consequence probability. Copyright © 2016 Elsevier Ltd. All rights reserved.

  15. Comparison of alternative concepts for lunar surface transportation

    Science.gov (United States)

    Apel, Uwe

    The lunar surface transportation system is a key element in lunar development. The decision which means of conveyance should be preferred depends on a lot of influencing factors such as transportation requirements, physical boundary conditions and economics. Starting with a systematic approach to define and structure the problem, a model to compare alternative transportation systems has been built. From the pool of possible means of conveyance, chemical rockets, electric cars, maglev-trains and mass-drivers have been chosen as candidates for investigation. With these candidates five different surface transportation systems were defined. For a reference lunar development scenario the systems were compared on the basis of a cost-to-benefit ratio. Preliminary results indicate that under the assumption that LH2 could be produced on lunar surface, LOX/LH2 propulsed "Hoppers" seem very attractive up to medium transportation demands. For large amounts of bulk cargo, mass driver transportation seems to have advantages, and electric cars should be used for all transportation tasks if the transportation demand is high. Maglev-trains seem to be competitive only for very large transportation demand and long life cycles.

  16. Design considerations to enhance the safety of patient compartments in ambulance transporters.

    Science.gov (United States)

    Byran, Eyal; Gilad, Issachar

    2012-01-01

    The safety of the interior of ambulances is dubious and, in the event of sudden impact during emergency transport, potentially perilous to patients they carry. The workplace ergonomics of the interior of the passenger cabin is lacking. This article discusses an improved ergonomic interior design based on study findings, observations and subjective perception. It suggests design aspects and safety concepts aimed at increasing the safety of patients and paramedic staff inside the ambulance as a mobile workstation.

  17. Safety analysis report for packaging: the ORNL loop transport cask

    Energy Technology Data Exchange (ETDEWEB)

    Evans, J.H.; Chipley, K.K.; Nelms, H.A.; Crowley, W.K.; Just, R.A.

    1977-11-01

    An evaluation of the ORNL loop transport cask demonstrating its compliance with the regulations governing the transportation of radioactive and fissile materials is presented. A previous review of the cask is updated to demonstrate compliance with current regulations, to present current procedures, and to reflect the more recent technology.

  18. Transport Accident Costs and the Value of Safety

    DEFF Research Database (Denmark)

    Koornstra, Matthijs; Evans, Andrew; Glansdorp, Cees;

    The publication descibes a study of costs of passenger transport accident by road, rail, air and sea. It is argued that "willingness to pay" theory should be preferred to "human capital" theory in valuations of life and limb. The total costs of passenger transport accidents in the EU is estimated...

  19. New basic safety regulations of radioactive material transport in Russia

    Energy Technology Data Exchange (ETDEWEB)

    Ananiev, V.V. [Div. of the Decommission of Nuclear and Radiation-Hazardous Object of the Federal Agency for Atomic Energy, Moscow (Russian Federation); Ershov, V.N. [FGUP ' ' Emergency Response Centre' ' , St-Petersburg (Russian Federation); Shvedov, M.O. [Div. of Nuclear and Radiation Safety of the Federal Agency for Atomic Energy, Moscow (Russian Federation)

    2004-07-01

    In the paper the system of normative regulation of radioactive material transport in Russia, basic principles and provisions of the new Russian regulations, available deviations from rules IAEA regulations are briefly considered. The problems, connected with putting in force of the new regulations in practice of transport, including problems of usage earlier designed and manufactured packages are considered as well.

  20. Vertical Transport of Subwavelength Localized Surface Electromagnetic Modes

    CERN Document Server

    Gao, Fei; Zhang, Youming; Shi, Xihang; Yang, Zhaoju; Zhang, Baile

    2015-01-01

    Transport of subwavelength electromagnetic (EM) energy has been achieved through near-field coupling of highly confined surface EM modes supported by plasmonic nanoparticles, in a configuration usually staying on a two-dimensional (2D) substrate. Vertical transport of similar modes along the third dimension, on the other hand, can bring more flexibility in designs of functional photonic devices, but this phenomenon has not been observed in reality. In this paper, designer (or spoof) surface plasmon resonators (plasmonic meta-atoms) are stacked in the direction vertical to their individual planes in demonstrating vertical transport of subwavelength localized surface EM modes. Dispersion relation of this vertical transport is determined from coupled mode theory and is verified with near-field transmission spectrum and field mapping with a microwave near-field scanning stage. This work extends the near-field coupled resonator optical waveguide (CROW) theory into the vertical direction, and may find applications ...

  1. Models of Fate and Transport of Pollutants in Surface Waters

    Science.gov (United States)

    Okome, Gloria Eloho

    2013-01-01

    There is the need to answer very crucial questions of "what happens to pollutants in surface waters?" This question must be answered to determine the factors controlling fate and transport of chemicals and their evolutionary state in surface waters. Monitoring and experimental methods are used in establishing the environmental states.…

  2. Models of Fate and Transport of Pollutants in Surface Waters

    Science.gov (United States)

    Okome, Gloria Eloho

    2013-01-01

    There is the need to answer very crucial questions of "what happens to pollutants in surface waters?" This question must be answered to determine the factors controlling fate and transport of chemicals and their evolutionary state in surface waters. Monitoring and experimental methods are used in establishing the environmental states.…

  3. Studying Polymer Transport on Soft and Hard Surfaces

    Science.gov (United States)

    Kumar, Sanat

    2007-03-01

    We have employed experiments and simulations to understand the factors controlling the transport of polymers on surfaces. From an experimental viewpoint we have focused on the transport of DNA (single stranded) on lipid bilayers. We show that this behavior is slaved to the mobility of the lipids. More surprisingly, it appears that the transport of molecules adsorbed on surfaces follows the same dependence on lipid mobility as for molecules incorporated into the lipid layer. The ability to control this surface diffusion through the introduction of posts or varying the strength of adsorption (by the use of an AC field normal to the surfaces) will also be studied. Theoretically we have used molecular dynamics simulations of a polymer chain of length N dissolved in explicit solvent and adsorbed as a pancake at the solid-liquid interface to discriminate between respective influences on surface diffusion of hydrodynamics and adsorption energetics. Only for analytically-smooth surfaces do we observe a strong influence of hydrodynamics; the polymer lateral diffusion constant, D, scales as D 1/N^3/4, more weakly than for implicit solvent. For atomistic surface corrugation with uniform surface chemical makeup, D 1/N instead. This suggests that while we can understand the results for diffusion on lipid surfaces, more recent experimental observations of stronger N dependence for diffusion on hard solid surfaces originate not in hydrodynamic interactions but in spatially patchy energetic interactions.

  4. Regional aviation safety organisations : enhancing air transport safety through regional cooperation

    NARCIS (Netherlands)

    Ratajczyk, Mikołaj Andrzej

    2014-01-01

    Aviation safety is of global concern. Yet 43% of countries worldwide lack the expertise and administrative capacity to ensure effective safety oversight of the aviation activities for which they are responsible under international law. With air traffic predicted to double in the next 15 years and

  5. Final Report: Safety of Plasma Components and Aerosol Transport During Hard Disruptions and Accidental Energy Release in Fusion Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Bourham, Mohamed A.; Gilligan, John G.

    1999-08-14

    Safety considerations in large future fusion reactors like ITER are important before licensing the reactor. Several scenarios are considered hazardous, which include safety of plasma-facing components during hard disruptions, high heat fluxes and thermal stresses during normal operation, accidental energy release, and aerosol formation and transport. Disruption events, in large tokamaks like ITER, are expected to produce local heat fluxes on plasma-facing components, which may exceed 100 GW/m{sup 2} over a period of about 0.1 ms. As a result, the surface temperature dramatically increases, which results in surface melting and vaporization, and produces thermal stresses and surface erosion. Plasma-facing components safety issues extends to cover a wide range of possible scenarios, including disruption severity and the impact of plasma-facing components on disruption parameters, accidental energy release and short/long term LOCA's, and formation of airborne particles by convective current transport during a LOVA (water/air ingress disruption) accident scenario. Study, and evaluation of, disruption-induced aerosol generation and mobilization is essential to characterize database on particulate formation and distribution for large future fusion tokamak reactor like ITER. In order to provide database relevant to ITER, the SIRENS electrothermal plasma facility at NCSU has been modified to closely simulate heat fluxes expected in ITER.

  6. Economic evaluation of safety measures for transport companies

    NARCIS (Netherlands)

    Rietveld, Piet; Rienstra, Sytze A.

    1998-01-01

    Measures to reduce material damage within companies may both increase the business economic performance of the company and traffic safety in general. In this paper the notion of whether such measures are economically feasible is investigated. Results are presented of a series of interviews amongtran

  7. Radiological safety assessment of transporting radioactive waste to the Gyeongju disposal facility in Korea

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Jong Tae; Baik, Min Hoon; Kang, Mun Ja; Ahn, Hong Joo; Hwang, Doo Seong; Hong, Dae Seok; Jeong, Yong Hwan; Kim, Kyung Su [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-12-15

    A radiological safety assessment study was performed for the transportation of low level radioactive wastes which are temporarily stored in Korea Atomic Energy Research Institute (KAERI), Daejeon, Korea. We considered two kinds of wastes: (1) operation wastes generated from the routine operation of facilities; and (2) decommissioning wastes generated from the decommissioning of a research reactor in KAERI. The important part of the radiological safety assessment is related to the exposure dose assessment for the incident-free (normal) transportation of wastes, i.e., the radiation exposure of transport personnel, radiation workers for loading and unloading of radioactive waste drums, and the general public. The effective doses were estimated based on the detailed information on the transportation plan and on the radiological characteristics of waste packages. We also estimated radiological risks and the effective doses for the general public resulting from accidents such as an impact and a fire caused by the impact during the transportation. According to the results, the effective doses for transport personnel, radiation workers, and the general public are far below the regulatory limits. Therefore, we can secure safety from the viewpoint of radiological safety for all situations during the transportation of radioactive wastes which have been stored temporarily in KAERI.

  8. Radiological Safety Assessment of Transporting Radioactive Wastes to the Gyeongju Disposal Facility in Korea

    Directory of Open Access Journals (Sweden)

    Jongtae Jeong

    2016-12-01

    Full Text Available A radiological safety assessment study was performed for the transportation of low level radioactive wastes which are temporarily stored in Korea Atomic Energy Research Institute (KAERI, Daejeon, Korea. We considered two kinds of wastes: (1 operation wastes generated from the routine operation of facilities; and (2 decommissioning wastes generated from the decommissioning of a research reactor in KAERI. The important part of the radiological safety assessment is related to the exposure dose assessment for the incident-free (normal transportation of wastes, i.e., the radiation exposure of transport personnel, radiation workers for loading and unloading of radioactive waste drums, and the general public. The effective doses were estimated based on the detailed information on the transportation plan and on the radiological characteristics of waste packages. We also estimated radiological risks and the effective doses for the general public resulting from accidents such as an impact and a fire caused by the impact during the transportation. According to the results, the effective doses for transport personnel, radiation workers, and the general public are far below the regulatory limits. Therefore, we can secure safety from the viewpoint of radiological safety for all situations during the transportation of radioactive wastes which have been stored temporarily in KAERI.

  9. Influence of Malfunctions of Selected Bus Subsystems on Bus Transportation Safety

    Directory of Open Access Journals (Sweden)

    Bojar Piotr

    2016-10-01

    Full Text Available This article introduces division of transport systems into land transport systems (road and rail as well as land and water transport systems (inland and sea, depending on the type of environment in which these systems carry out their tasks. Such systems comprise the class of social engineering systems of the Man – Technological Object – Environment (M – TO – E type. Such systems are influenced by forcing factors, leading to changes in their condition. Such factors may be divided into operational, external and anthropotechnical and they cause the degradation of the system on various levels, including a decrease of the degree of its safety. The article attempts to evaluate the safety of the operation of transport systems on the basis of the evaluation of the safety of the transport process carried out over a defined time interval Δt. The evaluation of the safety of the implemented transport process was prepared on the basis of a set of calculated index values determined depending on the type of transport.

  10. Summary of Federal Aviation Administration Responses to National Transportation Safety Board Safety Recommendations.

    Science.gov (United States)

    1982-01-01

    main gear assembly disclosed that the safety pin in the apex bolt of the main gear torque link had sheared and the nut on the apex bolt had been forced...Douglas performed a failure analysis of the recovered apex bolt which indicated that the safety pin failed or fell out and that the apex attachment nut...Operators Letter (AOL) 9-1261 on April 24, 1981, to change the method of securing the apex bolt attachment nut by replacing the safety pin , washer and cotter

  11. Sea surface temperature and Ekman transport in the Persian Gulf

    Directory of Open Access Journals (Sweden)

    E. H.

    2002-12-01

    Full Text Available   The wind drift motion of the water which is produced by the stress of the wind exerted upon the surface of the ocean is described by Ekmans theory (1905. Using the mean monthly values for the wind stress and SST, seasonal Ekman transport for the Persian Gulf was computed and contoured. The geostrophic winds have combined with the SST to estimate the effect of cooling due to Ekman transport of colder northern waters and inflow from the Oman Sea. The monthly SST mainly obtained from the 10 10 grided data of Levitus atlas and Hormuz Cruis Experiment for 1997.   Analyses show a NW to SE Ekman transport due to wind stress and significant interannual variability of SST on sea surface in the Persian Gulf. The seasonal variation of SST shows a continental pattern due to severe interaction between the land and sea. But these variations somehow moderates because of Ekman transport in Persian Gulf.

  12. NASA Space Transportation: Safety, Cost and Performance Initiatives

    Science.gov (United States)

    Rogacki, John Row

    2000-01-01

    This paper presents viewgraphs on NASA's Space Transportation. A space launch initiative is developed to provide a safe, reliable and affordable access to space. The topics include: 1) NASA's Integrated Architectural Approach; and 2) Safe, Reliable, and Affordable... Building a Highway to Space.

  13. Safety of Oversize Cargo in Ports and in the Sea Transport

    Directory of Open Access Journals (Sweden)

    Miroslaw Chmielinski

    2017-03-01

    Full Text Available Author of the paper analyzes problems related to the safety of the oversize cargo in ports and in the sea transport. Various modes of transport are used to carry oversized units that often include maritime transport. Transport of oversized cargo includes non-standard large and heavy pieces of cargo, such as electric transformers, reactor vessels, wind turbines, airplane fuselage or nuclear power plant components. The above paper is based on results of research oversized cargo in the Elpo Service Company and Pol-Mare Ltd. forwarding consulting agency.

  14. Water transport mechanism through open capillaries analyzed by direct surface modifications on biological surfaces

    Science.gov (United States)

    Ishii, Daisuke; Horiguchi, Hiroko; Hirai, Yuji; Yabu, Hiroshi; Matsuo, Yasutaka; Ijiro, Kuniharu; Tsujii, Kaoru; Shimozawa, Tateo; Hariyama, Takahiko; Shimomura, Masatsugu

    2013-10-01

    Some small animals only use water transport mechanisms passively driven by surface energies. However, little is known about passive water transport mechanisms because it is difficult to measure the wettability of microstructures in small areas and determine the chemistry of biological surfaces. Herein, we developed to directly analyse the structural effects of wettability of chemically modified biological surfaces by using a nanoliter volume water droplet and a hi-speed video system. The wharf roach Ligia exotica transports water only by using open capillaries in its legs containing hair- and paddle-like microstructures. The structural effects of legs chemically modified with a self-assembled monolayer were analysed, so that the wharf roach has a smart water transport system passively driven by differences of wettability between the microstructures. We anticipate that this passive water transport mechanism may inspire novel biomimetic fluid manipulations with or without a gravitational field.

  15. Surface hall effect and nonlocal transport in SmB₆: evidence for surface conduction.

    Science.gov (United States)

    Kim, D J; Thomas, S; Grant, T; Botimer, J; Fisk, Z; Xia, Jing

    2013-11-06

    A topological insulator (TI) is an unusual quantum state in which the insulating bulk is topologically distinct from vacuum, resulting in a unique metallic surface that is robust against time-reversal invariant perturbations. The surface transport, however, remains difficult to isolate from the bulk conduction in most existing TI crystals (particularly Bi₂Se₃, Bi₂Te₃ and Sb₂Te₃) due to impurity caused bulk conduction. We report in large crystals of topological Kondo insulator (TKI) candidate material SmB₆ the thickness-independent surface Hall effects and non-local transport, which persist after various surface perturbations. These results serve as proof that at low temperatures SmB₆ has a metallic surface that surrounds an insulating bulk, paving the way for transport studies of the surface state in this proposed TKI material.

  16. Occurrence Classifications, Severity Weighting, and Normalization for the DOE Packaging and Transportation Safety Metrics Indicator Program

    Energy Technology Data Exchange (ETDEWEB)

    Dickerson, L.S.; Pope, R.B.; Michelhaugh, R.D.; Harrison, I.G.; Hermann, B.; Lester, P.B.

    1999-06-01

    The US Department of Energy (DOE) Occurrence Reporting and Processing System (ORPS) is an interactive computer system designed to support DOE-owned or -operated facilities in reporting and processing information concerning occurrences related to facility operations. The Oak Ridge National Laboratory has been charged by the DOE National Transportation Program Albuquerque (NTPA) with the responsibility of retrieving reports and information pertaining to packaging and transportation (P and T) incidents from the centralized ORPS database. These selected reports are analyzed for trends, impact on P and T operations and safety concerns, and ''lessons learned'' in P and T safety.

  17. Directional transport of impinging capillary jet on wettability engineered surfaces

    Science.gov (United States)

    Ghosh, Aritra; Chatterjee, Souvick; Sinha Mahapatra, Pallab; Ganguly, Ranjan; Megaridis, Constantine

    2015-11-01

    Impingement of capillary jet on a surface is important for applications like heat transfer, or for liquid manipulation in bio-microfluidic devices. Using wettability engineered surfaces, we demonstrate pump-less and directional transport of capillary jet on a flat surface. Spatial contrast of surface energy and a wedge-shape geometry of the wettability confined track on the substrate facilitate formation of instantaneous spherical bulges upon jet impingement; these bulges are further transported along the superhydrophilic tracks due to Laplace pressure gradient. Critical condition warranted for formation of liquid bulge along the varying width of the superhydrophilic track is calculated analytically and verified experimentally. The work throws light on novel fluid phenomena of unidirectional jet impingement on wettability confined surfaces and provides a platform for innovative liquid manipulation technique for further application. By varying the geometry and wettability contrast on the surface, one can achieve volume flow rates of ~ O(100 μL/sec) and directionally guided transport of the jet liquid, pumplessly at speeds of ~ O(10cm/sec).

  18. Study Regarding the Provision of Security and Safety in the International Maritime Transport

    Directory of Open Access Journals (Sweden)

    Liliana POPA

    2011-11-01

    Full Text Available The security in transport has become a crucial issue internationally, especially after the terrorist attacks of September 2001 and even more recently. Maritime, along with aviation, is considered a sensitive and of high-risk transport sector, in terms of security. Moreover, topics related to safety in maritime transport have become very important over the past decades mostly because of the numerous maritime accidents putting in danger both human lives and the environment. Taking into account the global dimension of maritime transport along with the fact that the participation of Asia in the world trade during the past decade has been substantial, the current maritime safety and security practices apply for all areas. This can only be achieved through the application of high standards and regulations setting the prerequisites for safe and secure navigation. In this direction, a significant number of Directives, Regulations and Initiatives on maritime safety and security have been introduced by international and European organizations, such as the International Maritime Organization, (I.M.O., the International Labour Organization (I.L.O. and the European Union (EU. In the framework of this analysis, the levels of compliance of European and Asian countries, regarding the international legislation, is examined while special emphasis is given on the problems and difficulties encountered during the implementation processes. Furthermore, a number of recommendations aiming to enhance the existing levels of safety and security in maritime transport in both examined area is provided.

  19. Modeling marine surface microplastic transport to assess optimal removal locations

    NARCIS (Netherlands)

    Sherman, Peter; Van Sebille, Erik

    2016-01-01

    Marine plastic pollution is an ever-increasing problem that demands immediate mitigation and reduction plans. Here, a model based on satellite-tracked buoy observations and scaled to a large data set of observations on microplastic from surface trawls was used to simulate the transport of plastics f

  20. Modeling marine surface microplastic transport to assess optimal removal locations

    NARCIS (Netherlands)

    Sherman, Peter; Van Sebille, Erik|info:eu-repo/dai/nl/304831921

    2016-01-01

    Marine plastic pollution is an ever-increasing problem that demands immediate mitigation and reduction plans. Here, a model based on satellite-tracked buoy observations and scaled to a large data set of observations on microplastic from surface trawls was used to simulate the transport of plastics

  1. Barents Sea heat – transport, storage and surface fluxes

    Directory of Open Access Journals (Sweden)

    Ø. Skagseth

    2009-07-01

    Full Text Available Sensitivity of the Barents Sea to variation in ocean heat transport and surface fluxes is explored using a 1-D column model. Mean monthly ocean transport and atmospheric forcing are synthesised and force model results that reproduce the observed winter convection and surface warming and freshening well. Model results are compared to existing estimates of the ocean to air heat fluxes and horizontally averaged profiles for the southern and northern Barents Sea. Our results indicate that the ~70 TW of heat transported to the Barents Sea by ocean currents is lost in the southern Barents Sea as latent, sensible, and long wave radiation, each contributing 23–39 TW to the total heat loss. Solar radiation adds 26 TW in the south, as there is no significant ice production. The northern Barents Sea, the major part of the area, receives little ocean heat transport. This leads to a mixed layer at the freezing point during winter and significant ice production. There is little net surface heat loss in the north, the balance is achieved by long wave loss removing most of the solar heating, and the model also suggests a positive sensible heat gain. During the last decade the Barents Sea has experienced an atmospheric warming and an increased ocean heat transport. Despite large changes the Barents Sea heat loss remains robust, the temperature adjusts, and the yearly cycle remains. Decreasing the ocean heat transport below 50 TW starts a transition towards Arctic conditions. The heat loss in the Barents Sea depend on the effective area for cooling, and an increased heat transport probably leads to a spreading of warm water further north.

  2. STM tip-mediated mass transport on Cu surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Y.S.N. [College of Physical Science and Technology, Shenyang Normal University, Huanghe Street 253, Shenyang 110034 (China); Huang, R.Z., E-mail: renzhonghuang@synu.edu.cn [College of Physical Science and Technology, Shenyang Normal University, Huanghe Street 253, Shenyang 110034 (China); Gao, T.F. [College of Physical Science and Technology, Shenyang Normal University, Huanghe Street 253, Shenyang 110034 (China); Zhang, R.J. [School of Information Science and Engineering, Fudan University, Handan Road 220, Shanghai 200433 (China); Wang, Y.M. [Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Wenhua Road 72, Shenyang 110016 (China)

    2015-02-01

    Highlights: • Tip-induced atomic motion of Co atoms embedded in the Cu (0 0 1) surface in the presence of vacancies. • Interlayer mass transport at the island edge is found to depend strongly on the tip height and the lateral distance from the tip. • The jumping and the Ehrlich–Schwoebel (E–S) diffusion barrier can be reduced by tip manipulation. - Abstract: Atomic-scale simulations are performed to study atomic motion on Cu surfaces to illustrate the effect of the scanning tunneling microscopy tip on mass transport (MT) in the surfaces and on top of the Co island in heteroepitaxial Co/Cu(0 0 1) and Co/Cu(1 1 1) systems. First we investigate tip-induced atomic motion of Co atoms embedded in the Cu(0 0 1) surface at zero bias voltage. With the help of the tip, the Co atom in the surface can freely diffuse toward its nearby vacancy site. So-called vacancy mechanism is used to interpret this phenomenon. Then tip-mediated atomic motion of Co adatoms on the Co islands supported by a Cu(1 1 1) surface is studied. It is revealed that the tip has a significant effect on the diffusion of adatoms on the islands and interlayer mass transport at the island edge. Interlayer mass transport at the island edge is found to depend strongly on the tip height and the lateral distance from the tip. By calculating the diffusion barriers, it is found that the jumping diffusion barrier on the island can be zero by the tip vertical manipulation while the Ehrlich–Schwoebel diffusion barrier at the island edge can be reduced by the tip lateral manipulation. Thus, the quality of thin films can be improved by controlling MT in and/or on the surface.

  3. Safety : the challenge of today for transportation safety in the future. General report on theme -V "Safety" at the 14th International Study Week on Traffic Engineering and Safety, Strasbourg, September 7-10, 1982.

    NARCIS (Netherlands)

    Asmussen, E.

    1982-01-01

    Transportation (un)safety is the result of a complex process in the transportation system. A large number of variables (characteristics of the system elements) with many interactions, produce a complex network of relationships expressed in "system behaviour". In this network of relationships, man as

  4. Heat in the Barents Sea: transport, storage, and surface fluxes

    Directory of Open Access Journals (Sweden)

    L. H. Smedsrud

    2010-02-01

    Full Text Available A column model is set up for the Barents Sea to explore sensitivity of surface fluxes and heat storage from varying ocean heat transport. Mean monthly ocean transport and atmospheric forcing are synthesised and force the simulations. Results show that by using updated ocean transports of heat and freshwater the vertical mean hydrographic seasonal cycle can be reproduced fairly well.

    Our results indicate that the ~70 TW of heat transported to the Barents Sea by ocean currents is lost in the southern Barents Sea as latent, sensible, and long wave radiation, each contributing 23–39 TW to the total heat loss. Solar radiation adds 26 TW in the south, as there is no significant ice production.

    The northern Barents Sea receives little ocean heat transport. This leads to a mixed layer at the freezing point during winter and significant ice production. There is little net surface heat loss annually in the north. The balance is achieved by a heat loss through long wave radiation all year, removing most of the summer solar heating.

    During the last decade the Barents Sea has experienced an atmospheric warming and an increased ocean heat transport. The Barents Sea responds to such large changes by adjusting temperature and heat loss. Decreasing the ocean heat transport below 50 TW starts a transition towards Arctic conditions. The heat loss in the Barents Sea depend on the effective area for cooling, and an increased heat transport leads to a spreading of warm water further north.

  5. Aviation safety research and transportation/hazard avoidance and elimination

    Science.gov (United States)

    Sonnenschein, C. M.; Dimarzio, C.; Clippinger, D.; Toomey, D.

    1976-01-01

    Data collected by the Scanning Laser Doppler Velocimeter System (SLDVS) was analyzed to determine the feasibility of the SLDVS for monitoring aircraft wake vortices in an airport environment. Data were collected on atmospheric vortices and analyzed. Over 1600 landings were monitored at Kennedy International Airport and by the end of the test period 95 percent of the runs with large aircraft were producing usable results in real time. The transport was determined in real time and post analysis using algorithms which performed centroids on the highest amplitude in the thresholded spectrum. Making use of other parameters of the spectrum, vortex flow fields were studied along with the time histories of peak velocities and amplitudes. The post analysis of the data was accomplished with a CDC-6700 computer using several programs developed for LDV data analysis.

  6. Intelligent transportation systems dependable vehicular communications for improved road safety

    CERN Document Server

    Ferreira, Joaquim; Fonseca, José

    2016-01-01

    This book presents cutting-edge work on the most challenging research issues concerning intelligent transportation systems (ITS), introducing selected, highly relevant advanced research on scheduling and real-time communication for vehicular networks, as well as fault tolerance, test beds and simulations for ITS. The authors define new architectures that support cooperative sensing in ITS and offer guidance for the development of a reference end-to-end implementation. The presented results allow advanced traffic and travel management strategies to be formulated on the basis of reliable and real-time input data. The effectiveness of these new strategies, together with the proposed systems, is assessed in field trials and via simulations. The chapters in this book detail new research findings, algorithms, protocols, and the development of an implementation platform for ITS that merges and integrates heterogeneous data sources into a common system. In addition, they provide a set of advanced tools for the contro...

  7. Fire safety of LPG in marine transportation. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Martinsen, W.E.; Johnson, D.W.; Welker, J.R.

    1980-06-01

    This report contains an analytical examination of cargo spill and fire hazard potential associated with the marine handling of liquefied petroleum gas (LPG) as cargo. Principal emphasis was on cargo transfer operations for ships unloading at receiving terminals, and barges loading or unloading at a terminal. Major safety systems, including emergency shutdown systems, hazard detection systems, and fire extinguishment and control systems were included in the analysis. Spill probabilities were obtained from fault tree analyses utilizing composite LPG tank ship and barge designs. Failure rates for hardware in the analyses were generally taken from historical data on similar generic classes of hardware, there being very little historical data on the specific items involved. Potential consequences of cargo spills of various sizes are discussed and compared to actual LPG vapor cloud incidents. The usefulness of hazard mitigation systems (particularly dry chemical fire extinguishers and water spray systems) in controlling the hazards posed by LPG spills and spill fires is also discussed. The analysis estimates the probability of fatality for a terminal operator is about 10/sup -6/ to 10/sup -5/ per cargo transfer operation. The probability of fatality for the general public is substantially less.

  8. Fire safety of LPG in marine transportation. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Martinsen, W.E.; Johnson, D.W.; Welker, J.R.

    1980-06-01

    This report contains an analytical examination of cargo spill and fire hazard potential associated with the marine handling of liquefied petroleum gas (LPG) as cargo. Principal emphasis was on cargo transfer operations for ships unloading at receiving terminals, and barges loading or unloading at a terminal. Major safety systems, including emergency shutdown systems, hazard detection systems, and fire extinguishment and control systems were included in the analysis. Spill probabilities were obtained from fault tree analyses utilizing composite LPG tank ship and barge designs. Failure rates for hardware in the analyses were generally taken from historical data on similar generic classes of hardware, there being very little historical data on the specific items involved. Potential consequences of cargo spills of various sizes are discussed and compared to actual LPG vapor cloud incidents. The usefulness of hazard mitigation systems (particularly dry chemical fire extinguishers and water spray systems) in controlling the hazards posed by LPG spills and spill fires is also discussed. The analysis estimates the probability of fatality for a terminal operator is about 10/sup -6/ to 10/sup -5/ per cargo transfer operation. The probability of fatality for the general public is substantially less.

  9. Excess Surface Area in Bioelectrochemical Systems Causes ion Transport Limitations

    Energy Technology Data Exchange (ETDEWEB)

    Harrington, Timothy D.; Babauta, Jerome T.; Davenport, Emily K.; Renslow, Ryan S.; Beyenal, Haluk

    2015-05-01

    We investigated ion transport limitations on 3D graphite felt electrodes by growing Geobacter sulfurreducens biofilms with advection to eliminate external mass transfer limitations. We characterized ion transport limitations by: (i) showing that serially increasing NaCl concentration up to 200mM increased current linearly up to a total of þ273% vs. 0mM NaCl under advective conditions; (ii) growing the biofilm with a starting concentration of 200mM NaCl, which led to a maximum current increase of 400% vs. current generation without NaCl, and (iii) showing that un-colonized surface area remained even after steadystate current was reached. After accounting for iR effects, we confirmed that the excess surface area existed despite a non-zero overpotential. The fact that the biofilm was constrained from colonizing and producing further current under these conditions confirmed the biofilms under study here were ion transport-limited. Our work demonstrates that the use of high surface area electrodes may not increase current density when the system design allows ion transport limitations to become dominant.

  10. Japan's regulatory and safety issues regarding nuclear materials transport

    Energy Technology Data Exchange (ETDEWEB)

    Saito, T. [Nuclear and Industrial Safety Agency, Ministry of Economy, Trade and Industry, Government of Japan, Tokyo (Japan); Yamanaka, T. [Japan Nuclear Energy Safety Organization, Government of Japan, Tokyo (Japan)

    2004-07-01

    This paper focuses on the regulatory and safety issues on nuclear materials transport which the Government of Japan (GOJ) faces and needs to well handle. Background information about the status of nuclear power plants (NPP) and nuclear fuel cycle (NFC) facilities in Japan will promote a better understanding of what this paper addresses.

  11. 76 FR 4847 - Hazardous Materials: Safety Requirements for External Product Piping on Cargo Tanks Transporting...

    Science.gov (United States)

    2011-01-27

    ...: Safety Requirements for External Product Piping on Cargo Tanks Transporting Flammable Liquids AGENCY... flammable liquids in unprotected external product piping on DOT specification cargo tank motor vehicles. If... specification cargo tank motor vehicle (CTMV), unless the vehicle is equipped with bottom damage...

  12. 76 FR 14643 - Hazardous Materials: Safety Requirements for External Product Piping on Cargo Tanks Transporting...

    Science.gov (United States)

    2011-03-17

    ...: Safety Requirements for External Product Piping on Cargo Tanks Transporting Flammable Liquids AGENCY... external product piping (wetlines) on a cargo tank motor vehicle (CTMV) unless the CTMV is equipped with... National Tank Truck Carriers, Inc., and the Tank Truck Manufacturers Association requesting an extension...

  13. Safety evaluation for packaging transport of LSA-II liquids in MC-312 cargo tanks

    Energy Technology Data Exchange (ETDEWEB)

    Carlstrom, R.F.

    1996-09-11

    This safety evaluation for packaging authorizes the onsite transfer of bulk LSA-II radioactive liquids in the 222-S Laboratory Cargo Tank and Liquid Effluent Treatment Facility Cargo Tanks (which are U.S. Department of Transportation MC-312 specification cargo tanks) from their operating facilities to tank farm facilities.

  14. Collaborative Approaches in Developing Environmental and Safety Management Systems for Commercial Space Transportation

    Science.gov (United States)

    Zee, Stacey; Murray, D.

    2009-01-01

    The Federal Aviation Administration (FAA), Office of Commercial Space Transportation (AST) licenses and permits U.S. commercial space launch and reentry activities, and licenses the operation of non-federal launch and reentry sites. ASTs mission is to ensure the protection of the public, property, and the national security and foreign policy interests of the United States during commercial space transportation activities and to encourage, facilitate, and promote U.S. commercial space transportation. AST faces unique challenges of ensuring the protection of public health and safety while facilitating and promoting U.S. commercial space transportation. AST has developed an Environmental Management System (EMS) and a Safety Management System (SMS) to help meet its mission. Although the EMS and SMS were developed independently, the systems share similar elements. Both systems follow a Plan-Do-Act-Check model in identifying potential environmental aspects or public safety hazards, assessing significance in terms of severity and likelihood of occurrence, developing approaches to reduce risk, and verifying that the risk is reduced. This paper will describe the similarities between ASTs EMS and SMS elements and how AST is building a collaborative approach in environmental and safety management to reduce impacts to the environment and risks to the public.

  15. Collaborative Approaches in Developing Environmental and Safety Management Systems for Commercial Space Transportation

    Science.gov (United States)

    Zee, Stacey; Murray, D.

    2009-01-01

    The Federal Aviation Administration (FAA), Office of Commercial Space Transportation (AST) licenses and permits U.S. commercial space launch and reentry activities, and licenses the operation of non-federal launch and reentry sites. ASTs mission is to ensure the protection of the public, property, and the national security and foreign policy interests of the United States during commercial space transportation activities and to encourage, facilitate, and promote U.S. commercial space transportation. AST faces unique challenges of ensuring the protection of public health and safety while facilitating and promoting U.S. commercial space transportation. AST has developed an Environmental Management System (EMS) and a Safety Management System (SMS) to help meet its mission. Although the EMS and SMS were developed independently, the systems share similar elements. Both systems follow a Plan-Do-Act-Check model in identifying potential environmental aspects or public safety hazards, assessing significance in terms of severity and likelihood of occurrence, developing approaches to reduce risk, and verifying that the risk is reduced. This paper will describe the similarities between ASTs EMS and SMS elements and how AST is building a collaborative approach in environmental and safety management to reduce impacts to the environment and risks to the public.

  16. Quantum Transport and Surface Scattering in Magnetic Metallic Film

    Institute of Scientific and Technical Information of China (English)

    HU Yin; DONG Zheng-Chao

    2008-01-01

    Taking into account the quantum size effect and the spin dependence of the electronic band structure,and including the spin dependence of the scattering from bulk impurities and two different sets of surface roughness,we present a theory on the electronic transport in magnetic film,in which the average autocorrelation function (ACF) for surface roughness is described by a Gaussion model.Our result shows that the conductivity is a sensitive function of surface roughness and exchange energy.It is also found that in the thin film limit and in the lower-order approximation of the surface scattering,the total conductivity is given by a sum of conductivities of all the subbands and the two spin channels,for each subband and each spin channel the scattering rates due to the impurities and two surfaces are additive.

  17. A comparative study between transport and criticality safety indexes for fissile uranium nuclearly pure

    Energy Technology Data Exchange (ETDEWEB)

    Moraes da Silva, T. de; Sordi, G.M.A.A. [Instituto de Pesquisas Energeticas e Nucleares, IPEN/CNEN (Brazil)]. e-mail: tmsilva@ipen.br

    2006-07-01

    The international and national standards determine that during the transport of radioactive materials the package to be sent should be identified by labels of risks specifying content, activity and the transport index. The result of the monitoring of the package to 1 meter identifies the transport index, TI, which represents the dose rate to 1 meter of this. The transport index is, by definition, a number that represents a gamma radiation that crosses the superficial layer the radioactive material of the package to 1 meter of distance. For the fissile radioactive material that is the one in which a neutron causes the division of the atom, the international standards specify criticality safety index CSI, which is related with the safe mass of the fissile element. In this work it was determined the respective safe mass for each considered enrichment for the compounds of uranium oxides UO{sub 2}, U{sub 3}O{sub 8} and U{sub 3}Si{sub 2}. In the study of CSI it was observed that the value 50 of the expression 50/N being N the number of packages be transported in subcriticality conditions it represents a fifth part of the safe mass of the element uranium or 9% of the smallest mass critical for a transport not under exclusive use. As conclusion of the accomplished study was observed that the transport index starting from 7% of enrichment doesn't present contribution and that criticality safety index is always greater than the transport index. Therefore what the standards demand to specify, the largest value between both indexes, was clearly identified in this study as being the criticality safety index. (Author)

  18. Band bending and electrical transport at chemically modified silicon surfaces

    Science.gov (United States)

    Lopinski, Greg; Ward, Tim; Hul'Ko, Oleksa; Boukherroub, Rabah

    2002-03-01

    High resolution electron energy loss spectroscopy (HREELS) and electrical transport measurements have been used to investigate how various chemical modifications give rise to band bending and alter the conductivity of Si(111) surfaces. HREELS is a sensitive probe of band bending through observations of the low frequency free carrier plasmon mode. For hydrogen terminated surfaces, prepared by the standard etch in ammonium flouride, HREELS measurements on both n and n+ substrates are consistent with nearly flat bands. Chlorination of these surfaces results in substantial upward band bending due to the strong electron withdrawing nature of the chlorine, driving the surface into inversion. The presence of this inversion layer on high resistivity n-type samples is observed through a substantial enhancement of the surface conductivity (relative to the H-terminated surface), as well as through broadening of the quasi-elastic peak in the HREELS measurements. We have also begun to examine organically modified silicon surfaces, prepared by various wet chemical reactions with the H-terminated surface. Decyl modified Si(111) surfaces are seen to exhibit a small degree of band bending, attributed to extrinsic defect states cause by a small degree of oxidation accompanying the modification reaction. The prospects of using conductivity as an in-situ monitor of the rate of these reactions will be discussed.

  19. Shielding calculation and criticality safety analysis of spent fuel transportation cask in research reactors.

    Science.gov (United States)

    Mohammadi, A; Hassanzadeh, M; Gharib, M

    2016-02-01

    In this study, shielding calculation and criticality safety analysis were carried out for general material testing reactor (MTR) research reactors interim storage and relevant transportation cask. During these processes, three major terms were considered: source term, shielding, and criticality calculations. The Monte Carlo transport code MCNP5 was used for shielding calculation and criticality safety analysis and ORIGEN2.1 code for source term calculation. According to the results obtained, a cylindrical cask with body, top, and bottom thicknesses of 18, 13, and 13 cm, respectively, was accepted as the dual-purpose cask. Furthermore, it is shown that the total dose rates are below the normal transport criteria that meet the standards specified.

  20. Growth of motorized mobility and strategies for road safety. Paper to be published in Transport Miesjki (Public Transport), 1993, No. 9 (Polish).

    NARCIS (Netherlands)

    Koornstra, M.J.

    2012-01-01

    Free market economies have shown the dominating utility of motorized transport, both for passenger and goods transport. One negative side of motorization is the lack of road safety. Although it is shown that air, water and rail transport are much safer, the individual and company utility of motorize

  1. Droplet Transport Mechanism on Horizontal Hydrophilic/Hydrophobic Surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Myong, Hyon Kook [Kookmin University, Seoul (Korea, Republic of)

    2014-06-15

    A fluid transport technique is a key issue for the development of microfluidic systems. In this study, the movement of a droplet on horizontal hydrophilic/hydrophobic surfaces, which is a new concept to transport droplets without external power sources that was recently proposed by the author, was simulated using an in-house solution code(PowerCFD). This code employs an unstructured cell-centered method based on a conservative pressure-based finite-volume method with interface capturing method(CICSAM) in a volume of fluid(VOF) scheme for phase interface capturing. The droplet transport mechanism is examined through numerical results that include velocity vectors, pressure contours, and total kinetic energy inside and around the droplet.

  2. Surface Diffusion Effect on Gas Transport in Nanoporous Materials

    Science.gov (United States)

    Hori, Takuma; Yoshimoto, Yuta; Takagi, Shu; Kinefuchi, Ikuya

    2016-11-01

    Polymer electrolyte fuel cells are one of the promising candidates for power sources of electric vehicles. For further improvement of their efficiency in high current density operation, a better understanding of oxygen flow inside the cells, which have micro- or nanoporous structures, is necessary. Molecular simulations such as the direct simulation of Monte Carlo (DSMC) are necessary to elucidate flow phenomena in micro- or nanostructures since the Knudsen number is close to unity. Our previous report showed that the oxygen diffusion resistance in porous structures with a characteristic pore size of 100 nm calculated by DSMC agrees well with that measured experimentally. On the other hand, when it comes to the transport in structures with much smaller pore sizes, it is expected that the surface diffusion has a significant impact on gas transport because of their higher specific surface area. Here we present the calculation of gas transport in porous structures with considering surface diffusion. The numerical porous structure models utilized in our simulations are constructed from three-dimensional imaging of materials. The effect of the distance of random walk on the total diffusion resistance in the structures is discussed. This paper is based on results obtained from a project commissioned by the New Energy and Industrial Development Organization (NEDO).

  3. Instilling safety culture in the passenger rail transport industry within the South African context

    Directory of Open Access Journals (Sweden)

    Khulumane (John Maluleke

    2013-05-01

    Full Text Available South Africa has two major rail operators that constitute the rail transport industry. These are Transnet Freight Rail (TFR, which operates freight and the Passenger Rail Agency of South Africa (PRASA. Although the Railway Safety Regulator (2011:29 reported the year on year declining trend of collisions, the main concern is that the costs incurred for each year’s incidents is escalating. This article is concerned with the declining safety standards of these operators as evidenced by 742 collisions recorded during the 2011/2012 financial year for both operators. The focus is mainly on collisions during the movement of rolling stock within the PRASA environment. The analysis of the occurrences is narrowed down, with the emphasis on the province of Gauteng. In the analysis of the causes of these collisions, the problems that led to the root causes of these collisions is reported. Of critical importance is that every transport operator is faced with the challenges of how to effectively respond to the basic transport needs and requirements of the travelling public. The transport users’ need is to travel between the two geographical points. During the journey between these geographical points, the operator has safety and security requirements and must provide a reliable, accessible and affordable transport system. As the travelling public becomes more affluent, the transport needs become open ended and require much more rational public choices. The rail transport system remains a vital or indispensable business sector of the economy. By investing in new technology, rolling stock and infrastructure, we woud see an increase in innovation, competitiveness, and an elevated standard of living.

  4. TRANSPORTING CHILDREN IN CARS AND THE USE OF CHILD SAFETY RESTRAINT SYSTEMS

    Science.gov (United States)

    GARCÊS, ALLAN QUADROS; COIMBRA, IGOR BONIFACIO ANDRADE; SILVA, DIEGO SALVADOR MUNIZ DA

    2016-01-01

    ABSTRACT Objective: To evaluate the transport of children in automobiles and the use of child restraints systems (CRS). Methods: This is a transversal descriptive study which included 200 vehicle drivers who carried 0-10 year old children in the city of São Luis, MA, Brazil. The drivers' passengers' and children's features were properly identified. The children's transportation using CRS were analyzed according to the Resolution 277/8 of the Brazilian National Traffic Department. Results: The transportation of children was classified as inappropriate in 70.5% of the vehicles analyzed. The most common way for children transportation was free on the back seats (47%) or on the lap of passengers/drivers (17%). The main reasons to justify the improper transportation were either not understanding the importance of CRS use (64.5%) or not having financial resources to buy the devices. The child safety seat was the most used CRS (50.8 %) among vehicles with proper child transportation system. Conclusion: The transportation of children was inappropriate in most of the vehicles analyzed, reflecting the need for creating awareness among automobile drivers, including education, supervision and improvement of policies for health improvement and prevention of accidents involving children transportation. Level of Evidence III, Cross Sectional Study. PMID:28149196

  5. Safety as a management concept in the air transport sector: A systematic literature review

    Directory of Open Access Journals (Sweden)

    Fernando Campa-Planas

    2017-01-01

    Full Text Available Purpose: The main purpose of the present study is to conduct a literature review of the contribution made by safety in air transport, based on the existing international academic literature in the field of the social sciences. It primarily attempts to examine and verify the relationship between safety-related concepts (co-occurrence, the link between the different authors (co-authorship and the corresponding citations (co-citations. Methodology: To achieve the established objectives, a systematic literature review (SLR has been conducted using the Scopus database between the years 1990 and 2016, identifying international academic papers related to the research topic of the present study. Findings: It has been verified, on the one hand, that safety in the air transport sector is a field of growing interest, as the number of papers has increased considerably in recent years, thus demonstrating the importance that this topic has acquired over time. On the other hand, however, it must be mentioned that the total quantity of papers related to the topic is low in terms of absolute numbers. The results of the co-occurrence analysis show that the most important aspect of safety is safety management, while the strongest link is between safety management and aircraft accidents, a fact that is foreseeable a priori.  Originality/value: The approach used allows a better view of the academic contribution made in relation to safety; this serves as the link among the different elements of the concept studied, and it demonstrates the growing interest in this area.

  6. Slippery Liquid-Infused Porous Surfaces and Droplet Transportation by Surface Acoustic Waves

    Science.gov (United States)

    Luo, J. T.; Geraldi, N. R.; Guan, J. H.; McHale, G.; Wells, G. G.; Fu, Y. Q.

    2017-01-01

    On a solid surface, a droplet of liquid will stick due to the capillary adhesion, and this causes low droplet mobility. To reduce contact line pinning, surface chemistry can be coupled to micro- and/or nanostructures to create superhydrophobic surfaces on which a droplet balls up into an almost spherical shape, thus, minimizing the contact area. Recent progress in soft matter has now led to alternative lubricant-impregnated surfaces capable of almost zero contact line pinning and high droplet mobility without causing droplets to ball up and minimize the contact area. Here we report an approach to surface-acoustic-wave- (SAW) actuated droplet transportation enabled using such a surface. These surfaces maintain the contact area required for efficient energy and momentum transfer of the wave energy into the droplet while achieving high droplet mobility and a large footprint, therefore, reducing the threshold power required to induce droplet motion. In our approach, we use a slippery layer of lubricating oil infused into a self-assembled porous hydrophobic layer, which is significantly thinner than the SAW wavelength, and avoid damping of the wave. We find a significant reduction (up to 85%) in the threshold power for droplet transportation compared to that using a conventional surface-treatment method. Moreover, unlike droplets on superhydrophobic surfaces, where interaction with the SAW induces a transition from a Cassie-Baxter state to a Wenzel state, the droplets on our liquid-impregnated surfaces remain in a mobile state after interaction with the SAW.

  7. Internationalisation in Road Transport of Goods in Norway: Safety Outcomes, Risk Factors and Policy Implications

    Directory of Open Access Journals (Sweden)

    Tor-Olav Nævestad

    2017-09-01

    Full Text Available The European Union (EU promotes a gradual lifting of restrictions on foreign hauliers involved in domestic road transport of goods (cabotage, and liberalization of the current road cabotage rules may further increase the proportion of foreign heavy goods vehicles (HGVs on Norwegian roads. The aims of the present study are to: (1 Examine the safety outcomes of increasing internationalisation in (Norwegian road transport of goods; and (2 Discuss the importance of potential risk factors related to increasing proportions of foreign HGVs on Norwegian roads. We use four data sources to shed light on the aims. Results show that foreign HGVs account for 6% of the average domestic transport in Norway, and 11% of the HGVs involved in personal injury accidents. Additionally, foreign HGVs have a three times higher risk of single vehicle accidents, and twice the risk of head-on collisions. Foreign HGV drivers also seem more likely to trigger fatal accidents. We conclude that two risk factors seem to be important: (1 experience with/competence on Norwegian roads and (2 winter driving. Thus, the safety challenge is not that the drivers are foreign, but that they to some extent lack experience with, and competence on, the Norwegian road networks and the challenges that these roads may pose (e.g., narrow roads with high gradients, many curves, snow and ice. Previous research from other countries has also found that lacking experience with national road networks is an important risk factor. Given our results on risk factors, we may hypothesize that if foreign HGV drivers get more experience and education on Norwegian driving conditions, then increased internationalization could perhaps be of less concern in road safety. When discussing the higher accident risk and lower experience of foreign HGV drivers in Norway, it is important to note that the reason for foreign HGV drivers, working for foreign hauliers, to drive in Norway is that there are customers of the

  8. POWER MANAGEMENT SAFETY IN EU AND THE ENERGY POLICY IN TRANSPORTATION

    Directory of Open Access Journals (Sweden)

    Ryszard Rolbiecki

    2015-06-01

    Full Text Available EU countries face a serious problem of being too much dependent on the crude oil import. Transportation sector is especially dependent on import of fuels. Therefore The White Paper of 2011 outlines the need for more effective energy supplies management as one of the main European transportation policy objectives. Technical innovations, featuring a wider use of alternative fuels such as liquefied petroleum gas (LPG, liquefied natural gas (LNG and biofuels play a great role in the process of ensuring energy safety.

  9. Applications of ZigBee Technology in the Safety Monitoring System of Low Gas Pipeline Transportation

    Directory of Open Access Journals (Sweden)

    Wei Deyu

    2015-01-01

    Full Text Available The existing safety monitoring system of low gas pipeline transportation establishes a wired communication network monitoring system mainly on the basis of industrial bus. It has problems such as large transmission signal attenuation, complex wiring, high-labor intensity, inconvenient installation and maintenance, high maintenance cost, and so on. Featuring low cost, power-saving, reliability, stability and flexibility, the wireless sensor network established by ZigBee wireless communication technology can realize the real-time all-dimensional dynamic monitoring on parameters of low gas pipeline transportation system and overcome the shortcomings and deficiencies of wired network system.

  10. Spatiotemporal Structure of Aeolian Particle Transport on Flat Surface

    Science.gov (United States)

    Niiya, Hirofumi; Nishimura, Kouichi

    2017-05-01

    We conduct numerical simulations based on a model of blowing snow to reveal the long-term properties and equilibrium state of aeolian particle transport from 10-5 to 10 m above the flat surface. The numerical results are as follows. (i) Time-series data of particle transport are divided into development, relaxation, and equilibrium phases, which are formed by rapid wind response below 10 cm and gradual wind response above 10 cm. (ii) The particle transport rate at equilibrium is expressed as a power function of friction velocity, and the index of 2.35 implies that most particles are transported by saltation. (iii) The friction velocity below 100 µm remains roughly constant and lower than the fluid threshold at equilibrium. (iv) The mean particle speed above 300 µm is less than the wind speed, whereas that below 300 µm exceeds the wind speed because of descending particles. (v) The particle diameter increases with height in the saltation layer, and the relationship is expressed as a power function. Through comparisons with the previously reported random-flight model, we find a crucial problem that empirical splash functions cannot reproduce particle dynamics at a relatively high wind speed.

  11. Spatiotemporal Structure of Aeolian Particle Transport on Flat Surface

    CERN Document Server

    Niiya, Hirofumi

    2016-01-01

    We conduct numerical simulations based on a model of blowing snow to reveal the long-term properties and equilibrium state of aeolian particle transport from $10^{-5} \\hspace{0.5 ex} \\mathrm{m}$ to $10 \\hspace{0.5 ex} \\mathrm{m}$ above the flat surface. The numerical results are s follows. (i) Time-series data of particle transport are divided into development, relaxation, and equilibrium phases, which are formed by rapid wind response below $10 \\hspace{0.5 ex} \\mathrm{cm}$ and gradual wind response above $10 \\hspace{0.5 ex} \\mathrm{cm}$. (ii) The particle transport rate at equilibrium is expressed as a power function of friction velocity, and the index of 2.35 implies that most particles are transported by saltation. (iii) The friction velocity below $100 \\hspace{0.5 ex} \\mu\\mathrm{m}$ remains roughly constant and lower than the fluid threshold at equilibrium. (iv) The mean particle speed above $300 \\hspace{0.5 ex} \\mu\\mathrm{m}$ is less than the wind speed, whereas that below $300 \\hspace{0.5 ex} \\mu\\mathrm...

  12. Probabilistic Causal Analysis for System Safety Risk Assessments in Commercial Air Transport

    Science.gov (United States)

    Luxhoj, James T.

    2003-01-01

    Aviation is one of the critical modes of our national transportation system. As such, it is essential that new technologies be continually developed to ensure that a safe mode of transportation becomes even safer in the future. The NASA Aviation Safety Program (AvSP) is managing the development of new technologies and interventions aimed at reducing the fatal aviation accident rate by a factor of 5 by year 2007 and by a factor of 10 by year 2022. A portfolio assessment is currently being conducted to determine the projected impact that the new technologies and/or interventions may have on reducing aviation safety system risk. This paper reports on advanced risk analytics that combine the use of a human error taxonomy, probabilistic Bayesian Belief Networks, and case-based scenarios to assess a relative risk intensity metric. A sample case is used for illustrative purposes.

  13. Study on creation and destruction of transport barriers via effective safety factors for energetic particles

    OpenAIRE

    Ogawa, Shun; Leoncini, Xavier; Dif-Pradalier, Guilhem; Garbet, Xavier

    2016-01-01

    Charged particles with low kinetic energy move along magnetic field lines, but so do not energetic particles. We investigate the topological structure changes in the phase space of energetic particles with respect to the magnetic one. For this study cylindrical magnetic fields with non-monotonic safety factors that induce the magnetic internal transport barrier are considered. We show that the topological structure of the magnetic field line and of the particle trajectories can be quite diffe...

  14. Improving accuracy in road safety data exchange for navigation systems: European Union Location Framework Transportation Pilot

    OpenAIRE

    BORZACCHIELLO MARIA TERESA; BOGUSLAWSKI RAYMOND; Pignatelli, Francesco

    2016-01-01

    In the near future, the travel experience for drivers will radically change from what they were used to a decade ago: advanced safety systems will guide drivers and help reduce road accidents; built-in vehicle sensors will detect road and traffic conditions and adapt the behaviour of the vehicle; automatic control of the engine will enable the reduction of emissions and contribute to the objective of decarbonisation of transport. All this will be possible thanks to the application of Informat...

  15. Safety analysis report for packaging, onsite, long-length contaminated equipment transport system

    Energy Technology Data Exchange (ETDEWEB)

    McCormick, W.A.

    1997-05-09

    This safety analysis report for packaging describes the components of the long-length contaminated equipment (LLCE) transport system (TS) and provides the analyses, evaluations, and associated operational controls necessary for the safe use of the LLCE TS on the Hanford Site. The LLCE TS will provide a standardized, comprehensive approach for the disposal of approximately 98% of LLCE scheduled to be removed from the 200 Area waste tanks.

  16. Nanoscale electron transport at the surface of a topological insulator

    Science.gov (United States)

    Bauer, Sebastian; Bobisch, Christian A.

    2016-01-01

    The use of three-dimensional topological insulators for disruptive technologies critically depends on the dissipationless transport of electrons at the surface, because of the suppression of backscattering at defects. However, in real devices, defects are unavoidable and scattering at angles other than 180° is allowed for such materials. Until now, this has been studied indirectly by bulk measurements and by the analysis of the local density of states in close vicinity to defect sites. Here, we directly measure the nanoscale voltage drop caused by the scattering at step edges, which occurs if a lateral current flows along a three-dimensional topological insulator. The experiments were performed using scanning tunnelling potentiometry for thin Bi2Se3 films. So far, the observed voltage drops are small because of large contributions of the bulk to the electronic transport. However, for the use of ideal topological insulating thin films in devices, these contributions would play a significant role. PMID:27098939

  17. Nanoscale electron transport at the surface of a topological insulator

    Science.gov (United States)

    Bauer, Sebastian; Bobisch, Christian A.

    2016-04-01

    The use of three-dimensional topological insulators for disruptive technologies critically depends on the dissipationless transport of electrons at the surface, because of the suppression of backscattering at defects. However, in real devices, defects are unavoidable and scattering at angles other than 180° is allowed for such materials. Until now, this has been studied indirectly by bulk measurements and by the analysis of the local density of states in close vicinity to defect sites. Here, we directly measure the nanoscale voltage drop caused by the scattering at step edges, which occurs if a lateral current flows along a three-dimensional topological insulator. The experiments were performed using scanning tunnelling potentiometry for thin Bi2Se3 films. So far, the observed voltage drops are small because of large contributions of the bulk to the electronic transport. However, for the use of ideal topological insulating thin films in devices, these contributions would play a significant role.

  18. TRANSPORT OF BICOMPONENT CONTAMINANT IN FREE-SURFACE WETLAND FLOW

    Institute of Scientific and Technical Information of China (English)

    CHEN Bin; ZENG Li; WU Yi-hong; JI Ping; ZHAO Yi-jun

    2012-01-01

    This paper presents a theoretical analysis of a pulsed bicomponent contaminant emission into a free-surface wetland flow.The basic equations are for the bicomponent contaminant transport in the wetland flow under the combined action of advection,mass dispersion,and ecological reaction at the phase averaged scale.The effect of the ecological reaction is separated from the hydrodynamic effect via a set of widely used transforms.The analytical solution for the evolution of the depth-averaged concentration is rigorously derived,with a limiting case covering the known solution for the single component contaminant transport.It is found that the depth-averaged species concentration of the bicomponent contaminant can approach an equilibrium state determined by the distribution coefficient.

  19. The application of fracture mechanics to the safety assessment of transport casks for radioactive materials

    Energy Technology Data Exchange (ETDEWEB)

    Zencker, U.; Mueller, K.; Droste, B.; Roedel, R.; Voelzke, H. [Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin (Germany)

    2004-07-01

    BAM is the German responsible authority for the mechanical and thermal design safety assessment of packages for the transport of radioactive materials. The assessment has to cover the brittle fracture safety proof of package components made of potentially brittle materials. This paper gives a survey of the regulatory and technical requirements for such an assessment according to BAM's new ''Guidelines for the Application of Ductile Cast Iron for Transport and Storage Casks for Radioactive Materials''. Based on these guidelines higher stresses than before can become permissible, but it is necessary to put more effort into the safety assessment procedure. The fundamentals of such a proof with the help of the methods of fracture mechanics are presented. The recommended procedure takes into account the guidelines of the IAEA Advisory Material which are based on the prevention of crack initiation. Examples of BAM's research and safety assessment practices are given. Recommendations for further developments towards package designs with higher acceptable stress levels will be concluded.

  20. Ergonomics, safety, and resilience in the helicopter offshore transportation system of Campos Basin.

    Science.gov (United States)

    Gomes, José Orlando; Huber, Gilbert J; Borges, Marcos R S; de Carvalho, Paulo Victor R

    2015-01-01

    Air transportation of personnel to offshore oil platforms is one of the major hazards of this kind of endeavor. Pilot performance is a key factor in the safety of the transportation system. This study seeks to identify the ergonomic factors present in pilots' activities that may in some way compromise or enhance their performance, the constraints and affordances which they are subject to; and where possible to link these to their associated risk factors. Methodology adopted in this project studies work in its context. It is a merging of Activity Analysis (Guerin et al. 2001) of European tradition with Cognitive Task Analysis (CTA - www.ctaresource.com) articulated with the recent approaches to cognitive systems engineering developed by Professors David Woods and Erik Hollnagel. Fifty-five hours of field interviews provided the input for analysis. Sixteen ergonomic constraints were identified, some cognitive, some physical, all considered relevant by the research subjects and expert advisers. Although the safety record of the personnel transportation system studied is considered acceptable, there is low hanging fruit to be picked which can help improve the system's safety.

  1. Review of Regulatory Emphasis on Transportation Safety in the United States, 2002-2009: Public versus Private Modes.

    Science.gov (United States)

    Waycaster, Garrett C; Matsumura, Taiki; Bilotkach, Volodymyr; Haftka, Raphael T; Kim, Nam H

    2017-01-17

    The U.S. Department of Transportation is responsible for implementing new safety improvements and regulations with the goal of ensuring limited funds are distributed to where they can have the greatest impact on safety. In this work, we conduct a study of new regulations and other reactions (such as recalls) to fatal accidents in several different modes of transportation implemented from 2002 to 2009. We find that in the safest modes of commercial aviation and bus transport, the amount of spending on new regulations is high in relation to the number of fatalities compared to the regulatory attention received by less safe modes of general aviation and private automobiles. Additionally, we study two major fatal accident investigations from commercial aviation and two major automotive recalls associated with fatal accidents. We find differences in the cost per expected fatality prevented for these reactions, with the airline accident investigations being more cost effective. Overall, we observe trends in both the automotive and aviation sectors that suggest that public transportation receives more regulatory attention than private transport. We also observe that the types of safety remedies utilized, regulation versus investigation, have varying levels of effectiveness in different transport modes. We suggest that these differences are indicative of increased public demand for safety in modes where a third party may be held responsible, even for those not participating in the transportation. These findings have important implications for the transportation industry, policymakers, and for estimating the public demand for safety in new transport modes. © 2017 Society for Risk Analysis.

  2. Modeling marine surface microplastic transport to assess optimal removal locations

    Science.gov (United States)

    Sherman, Peter; van Sebille, Erik

    2016-01-01

    Marine plastic pollution is an ever-increasing problem that demands immediate mitigation and reduction plans. Here, a model based on satellite-tracked buoy observations and scaled to a large data set of observations on microplastic from surface trawls was used to simulate the transport of plastics floating on the ocean surface from 2015 to 2025, with the goal to assess the optimal marine microplastic removal locations for two scenarios: removing the most surface microplastic and reducing the impact on ecosystems, using plankton growth as a proxy. The simulations show that the optimal removal locations are primarily located off the coast of China and in the Indonesian Archipelago for both scenarios. Our estimates show that 31% of the modeled microplastic mass can be removed by 2025 using 29 plastic collectors operating at a 45% capture efficiency from these locations, compared to only 17% when the 29 plastic collectors are moored in the North Pacific garbage patch, between Hawaii and California. The overlap of ocean surface microplastics and phytoplankton growth can be reduced by 46% at our proposed locations, while sinks in the North Pacific can only reduce the overlap by 14%. These results are an indication that oceanic plastic removal might be more effective in removing a greater microplastic mass and in reducing potential harm to marine life when closer to shore than inside the plastic accumulation zones in the centers of the gyres.

  3. Advanced multi-dimensional deterministic transport computational capability for safety analysis of pebble-bed reactors

    Science.gov (United States)

    Tyobeka, Bismark Mzubanzi

    A coupled neutron transport thermal-hydraulics code system with both diffusion and transport theory capabilities is presented. At the heart of the coupled code is a powerful neutronics solver, based on a neutron transport theory approach, powered by the time-dependent extension of the well known DORT code, DORT-TD. DORT-TD uses a fully implicit time integration scheme and is coupled via a general interface to the thermal-hydraulics code THERMIX-DIREKT, an HTR-specific two dimensional core thermal-hydraulics code. Feedback is accounted for by interpolating multigroup cross sections from pre-generated libraries which are structured for user specified discrete sets of thermal-hydraulic parameters e.g. fuel and moderator temperatures. The coupled code system is applied to two HTGR designs, the PBMR 400MW and the PBMR 268MW. Steady-state and several design basis transients are modeled in an effort to discern with the adequacy of using neutron diffusion theory as against the more accurate but yet computationally expensive neutron transport theory. It turns out that there are small but significant differences in the results from using either of the two theories. It is concluded that diffusion theory can be used with a higher degree of confidence in the PBMR as long as more than two energy groups are used and that the result must be checked against lower order transport solution, especially for safety analysis purposes. The end product of this thesis is a high fidelity, state-of-the-art computer code system, with multiple capabilities to analyze all PBMR safety related transients in an accurate and efficient manner.

  4. Analysis of human factors effects on the safety of transporting radioactive waste materials: Technical report

    Energy Technology Data Exchange (ETDEWEB)

    Abkowitz, M.D.; Abkowitz, S.B.; Lepofsky, M.

    1989-04-01

    This report examines the extent of human factors effects on the safety of transporting radioactive waste materials. It is seen principally as a scoping effort, to establish whether there is a need for DOE to undertake a more formal approach to studying human factors in radioactive waste transport, and if so, logical directions for that program to follow. Human factors effects are evaluated on driving and loading/transfer operations only. Particular emphasis is placed on the driving function, examining the relationship between human error and safety as it relates to the impairment of driver performance. Although multi-modal in focus, the widespread availability of data and previous literature on truck operations resulted in a primary study focus on the trucking mode from the standpoint of policy development. In addition to the analysis of human factors accident statistics, the report provides relevant background material on several policies that have been instituted or are under consideration, directed at improving human reliability in the transport sector. On the basis of reported findings, preliminary policy areas are identified. 71 refs., 26 figs., 5 tabs.

  5. Ab initio transport across bismuth selenide surface barriers

    KAUST Repository

    Narayan, Awadhesh

    2014-11-24

    © 2014 American Physical Society. We investigate the effect of potential barriers in the form of step edges on the scattering properties of Bi2Se3(111) topological surface states by means of large-scale ab initio transport simulations. Our results demonstrate the suppression of perfect backscattering, while all other scattering processes, which do not entail a complete spin and momentum reversal, are allowed. Furthermore, we find that the spin of the surface state develops an out-of-plane component as it traverses the barrier. Our calculations reveal the existence of quasibound states in the vicinity of the surface barriers, which appear in the form of an enhanced density of states in the energy window corresponding to the topological state. For double barriers we demonstrate the formation of quantum well states. To complement our first-principles results we construct a two-dimensional low-energy effective model and illustrate its shortcomings. Our findings are discussed in the context of a number of recent experimental works.

  6. Safety improvement issues for mission aborts of future space transportation systems.

    Science.gov (United States)

    Mayrhofer, M; Wächter, M; Sachs, G

    2006-01-01

    Two-stage winged space access vehicles consisting of a carrier stage with airbreathing turbo/ram jet engines and a rocket propelled orbital stage which may significantly reduce space transport costs and have additional advantages offer a great potential for mission safety improvements. Formulating the nominal mission and abort scenarios caused by engine malfunctions as an optimal control problem allows full exploitation of safety capabilities. The shaping of the nominal mission has a significant impact on the prospective safety. For this purpose, most relevant mission aborts are considered together with the nominal mission, treating them as an optimization problem of branched trajectories where the branching point is not fixed. The applied procedure yields a safety improved nominal trajectory, showing the feasibility of the included mission aborts with minimum payload penalty. The other mission aborts can be separately treated, with the initial condition given by the state of the nominal trajectory at the time when a failure occurs. A mission abort plan is set up, covering all emergency scenarios.

  7. Game theoretic analysis of congestion, safety and security traffic and transportation theory

    CERN Document Server

    Zhuang, Jun

    2015-01-01

    Maximizing reader insights into the interactions between game theory, excessive crowding and safety and security elements in traffic and transportation theory, this book establishes a new research angle by illustrating linkages between different research approaches and through laying the foundations for subsequent analysis. Congestion (excessive crowding) is defined in this work as all kinds of flows; e.g., road/sea/air traffic, people, data, information, water, electricity, and organisms. Analyzing systems where congestion occurs – which may be in parallel, series, interlinked, or interdependent, with flows one way or both ways – this book puts forward new congestion models, breaking new ground by introducing game theory and safety/security. Addressing the multiple actors who may hold different concerns regarding system reliability; e.g. one or several terrorists, a government, various local or regional government agencies, or others with stakes for or against system reliability, this book describes how ...

  8. Ternary Complexation on Bacterial Surfaces: Implications for Subsurface Anion Transport

    Science.gov (United States)

    Maclean, L. C.; Higginbottom, C. M.; Fowle, D. A.

    2002-12-01

    The physical, chemical, and biological controls on contaminant mobilities in aquatic ecosystems must be determined to establish the threat that contamination poses to the environment. Quantitative models of contaminant mobilities are required as a prerequisite to guide remediation efforts and to prioritize the potential hazard to the ecosystem of each contaminated site. It is well established that mineral surface adsorption is an important control on contaminant mobilities, and many studies have utilized thermodynamics to quantify metal/organic adsorption in order to yield predictive models of contaminant transport. However, these models of contaminant transport may not be representative of the reactions which control contaminant mobilities as most mineral surfaces are coated with organic acids, bacteria, and extracellular polymers. Numerous laboratory studies have demonstrated that bacterial cell walls have a high affinity for binding metal cations, and field studies indicate that a significant proportion of bacteria cells and associated extracellular matrices are coated with small scale hydrous metal oxides. The small size of bacteria, and in many cases the nanoscale of their associated mineral phases, suggests these bacteria-mineral composites may represent a large proportion of surface area exposed to fluid flow. Therefore, due to the affinity of bacterial cell walls for cations and biominerals, bacteria may also have a significant impact on anionic contaminant mobility in many natural systems. The extent of metal-bacteria adsorption reactions varies drastically as a function of pH and solution chemistry. Current adsorption models have focused on the interactions of positively charged metal cations with bacterial surfaces, however in many oxidizing environments metals such as Cr exist as anions or anionic complexes. We have studied the ability of non-metabolizing cells of the bacterial species Bacillus subtilis and Shewanella putrifaciens to adsorb aqueous Cr

  9. Combined evaluation. Plutonium transports in France. Problems of safety and reliability of transport container FS47; Evaluation Conjointe. Transports de plutonium en France. Problemes de surete et de securite du container de transport FS47

    Energy Technology Data Exchange (ETDEWEB)

    Marignac, Y.; Coeytaux, X. [Wise-Paris, 75 (France); Large, J.H. [Nuclear Engineer, Large and Associates, Londres (United Kingdom)

    2004-09-15

    This report concerns the safety and the protection of plutonium dioxide transported from Cogema La Hague to the mixed oxide fuel plant of Marcoule and Cadarache. The French approach of the transport safety is based on the combining of two essential principles: the first one affirms that the performances of the FS47 container in regard of containment (norms TS-R-1 from IAEA for the accidental conditions) is conceived to resist in any situation even terrorism or sabotage. In fact, the IAEA norm follows a probabilistic study without a voluntary attack such a terrorist one. The second principle rests on the ability to prevent the treat of terrorism acts, because of a secrecy policy on the plutonium transport. It appeared that the Green peace association has succeeded several times to know exactly the hours, the trips of the plutonium transport and this simple thing raises more questions than it solves. (N.C.)

  10. Investigating the Use of 3-D Deterministic Transport for Core Safety Analysis

    Energy Technology Data Exchange (ETDEWEB)

    H. D. Gougar; D. Scott

    2004-04-01

    An LDRD (Laboratory Directed Research and Development) project is underway at the Idaho National Laboratory (INL) to demonstrate the feasibility of using a three-dimensional multi-group deterministic neutron transport code (Attila®) to perform global (core-wide) criticality, flux and depletion calculations for safety analysis of the Advanced Test Reactor (ATR). This paper discusses the ATR, model development, capabilities of Attila, generation of the cross-section libraries, comparisons to experimental results for Advanced Fuel Cycle (AFC) concepts, and future work planned with Attila.

  11. Fire Safety Aspects of Polymeric Materials. Volume 8. Land Transportation Vehicles

    Science.gov (United States)

    1979-01-01

    f LAND TRANSPORTATION VEHICLES The polyesters considered here are the linear thermoplastics; polylethylene terephthalate ), ( PET ...Polyvinyl Chloride 4.5.4 Acrylics 4.5.5 Nylons 4.5.6 Cellulosics 4.5.7 Polyacetals 4.5.8 Polyesters 4.5.9 Polycarbonates 4.5.10 Chlorinated and...Chlorosulfonated Polyethylene 4.6 Thermosetting Resins 4.6.1 Phenolic Resins and Molding Compounds 4.6.1.1 Resoles 4.6.1.2 Novolaks 4.6.1.3 Fire Safety

  12. Safety assessment of dangerous goods transport enterprise based on the relative entropy aggregation in group decision making model.

    Science.gov (United States)

    Wu, Jun; Li, Chengbing; Huo, Yueying

    2014-01-01

    Safety of dangerous goods transport is directly related to the operation safety of dangerous goods transport enterprise. Aiming at the problem of the high accident rate and large harm in dangerous goods logistics transportation, this paper took the group decision making problem based on integration and coordination thought into a multiagent multiobjective group decision making problem; a secondary decision model was established and applied to the safety assessment of dangerous goods transport enterprise. First of all, we used dynamic multivalue background and entropy theory building the first level multiobjective decision model. Secondly, experts were to empower according to the principle of clustering analysis, and combining with the relative entropy theory to establish a secondary rally optimization model based on relative entropy in group decision making, and discuss the solution of the model. Then, after investigation and analysis, we establish the dangerous goods transport enterprise safety evaluation index system. Finally, case analysis to five dangerous goods transport enterprises in the Inner Mongolia Autonomous Region validates the feasibility and effectiveness of this model for dangerous goods transport enterprise recognition, which provides vital decision making basis for recognizing the dangerous goods transport enterprises.

  13. Innovative neuro-fuzzy system of smart transport infrastructure for road traffic safety

    Science.gov (United States)

    Beinarovica, Anna; Gorobetz, Mikhail; Levchenkov, Anatoly

    2017-09-01

    The proposed study describes applying of neural network and fuzzy logic in transport control for safety improvement by evaluation of accidents’ risk by intelligent infrastructure devices. Risk evaluation is made by following multiple-criteria: danger, changeability and influence of changes for risk increasing. Neuro-fuzzy algorithms are described and proposed for task solution. The novelty of the proposed system is proved by deep analysis of known studies in the field. The structure of neuro-fuzzy system for risk evaluation and mathematical model is described in the paper. The simulation model of the intelligent devices for transport infrastructure is proposed to simulate different situations, assess the risks and propose the possible actions for infrastructure or vehicles to minimize the risk of possible accidents.

  14. Geosphere transport of radionuclides in safety assessment of spent fuel disposal

    Energy Technology Data Exchange (ETDEWEB)

    Jussila, P

    2000-07-01

    The study is associated with a research project of Radiation and Nuclear Safety Authority (STUK) to utilise analytical models in safety assessment for disposal of spent nuclear fuel. Geosphere constitutes a natural barrier for the possible escape of radionuclides from a geological repository of spent nuclear fuel. However, rock contains fractures in which flowing groundwater can transport material. Radionuclide transport in rock is complicated - the flow paths in the geosphere are difficult to characterise and there are various phenomena involved. In mathematical models, critical paths along which radionuclides can reach the biosphere are considered. The worst predictable cases and the effect of the essential parameters can be assessed with the help of such models although they simplify the reality considerably. Some of the main differences between the transport model used and the reality are the mathematical characterisation of the flow route in rock as a smooth and straight fracture and the modelling of the complicated chemical processes causing retardation with the help of a distribution coefficient that does not explain those phenomena. Radionuclide transport models via a heat transfer analogy and analytical solutions of them are derived in the study. The calculations are performed with a created Matlab program for a single nuclide model taking into account 1D advective transport along a fracture, 1D diffusion from the fracture into and within the porous rock matrices surrounding the fracture, retardation within the matrices, and radioactive decay. The results are compared to the results of the same calculation cases obtained by Technical Research Centre of Finland (VTT) and presented in TILA-99 safety assessment report. The model used by VTT is the same but the results have been calculated numerically in different geometry. The differences between the results of the present study and TILA-99 can to a large extent be explained by the different approaches to

  15. Accident risk and safety measures in the transport sector in Norway; Ulykkesrisiko og sikkerhetstiltak i transportsektoren

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    The scope of the work described in this report was (1) to evaluate methods for risk mapping considering all of the different means of transport, (2) to evaluate the extent to which measures should be taken against various types of accidents, (3) to evaluate cost-benefit assessments of accident-reducing measures irrespective of the different means of transport, (4) to evaluate the preferences of measures/cost effectiveness of different measures within different sectors, and (4) to evaluate the possibility of improving the efficiency of possible measures. It also considers the risk situation for ferry service. In addition to the purely human aspect, traffic accidents constitute an expensive social problem. Yet it would be too costly to meet a potential requirement that traffic accidents should disappear. The resources used by society to combat accidents have to be seen in the light of (1) the profit that can be achieved compared to alternative use of the resources, and (2) the possible negative consequences of different safety measures on, for instance, travel time and the extent of the transport. It is pointed out that when accident risk is compared from one transport means to another, different relative positions are found depending on how risk is quantified. Thus, for instance, on average, per year 5 times as many people die in accidents involving private cars as in motor cycle accidents, while for the number of deaths per billion person kilometers the ratio is almost the opposite,1:6.5. 34 refs., 12 figs., 13 tabs.

  16. Dynamics of EU Transport Safety Regulation in the European Policy Process: Differences and Similarities

    Directory of Open Access Journals (Sweden)

    Fleur Fragola

    2009-11-01

    Full Text Available The European Community (EC and subsequently, the European Union (EU, have been central to an impressive development of regulation at the European level. In this ‘regulatory age’ (Majone 1994, product safety has become one of the first issues to be dealt with, in order to overcome barriers to trade, and should be regarded as a first step to be taken in order to integrate European markets. Transport industries have experienced distinct levels, forms and timing of EU safety regulation. While the automotive industry has undergone a standardisation process since the 1970s, such questions were only addressed in the context of railways in the 2000s. Thus, it is interesting to question and analyse the various interplays of actors and/or events which have characterised the European policy process in each transport sector. In addition, a trans-sectoral comparison will help in explaining such differences and their impact on the validity of traditional EU decision-making theories, such as that developed by Héritier in 1996.

  17. Transportation Safety Standards for Wheelchair Users: A Review of Voluntary Standards for Improved Safety, Usability, and Independence of Wheelchair-Seated Travelers

    Science.gov (United States)

    Schneider, Lawrence W.; Manary, Miriam A.; Hobson, Douglas A.

    2008-01-01

    Safe transportation for wheelchair users who do not transfer to the vehicle seat when traveling in motor vehicles requires after-market wheelchair tiedown and occupant restraint systems (WTORS) to secure the wheelchair and provide crashworthy restraint for the wheelchair-seated occupant. In the absence of adequate government safety standards,…

  18. Topical safety analysis report for the transportation of the NUHOMS{reg_sign} dry shielded canister. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    None

    1993-08-01

    This Topical Safety Analysis Report (SAR) describes the design and the generic transportation licensing basis for utilizing the NUTECH HORIZONTAL MODULAR STORAGE (NUHOMS{reg_sign}) system dry shielded canister (DSC) containing twenty-four pressurized water reactor (PWR) spent fuel assemblies (SFA) in conjunction with a conceptually designed Transportation Cask. This SAR documents the design qualification of the NUHOMS{reg_sign} DSC as an integral part of a 10CFR71 Fissile Material Class III, Type B(M) Transportation Package. The package consists of the canister and a conceptual transportation cask (NUHOMS{reg_sign} Transportation Cask) with impact limiters. Engineering analysis is performed for the canister to confirm that the existing canister design complies with 10CFR71 transportation requirements. Evaluations and/or analyses is performed for criticality safety, shielding, structural, and thermal performance. Detailed engineering analysis for the transportation cask will be submitted in a future SAR requesting 10CFR71 certification of the complete waste package. Transportation operational considerations describe various operational aspects of the canister/transportation cask system. operational sequences are developed for canister transfer from storage to the transportation cask and interfaces with the cask auxiliary equipment for on- and off-site transport.

  19. 36 CFR 13.460 - Use of snowmobiles, motorboats, dog teams, and other means of surface transportation...

    Science.gov (United States)

    2010-07-01

    ... transportation in accordance with 43 CFR 36.11(c), (d), (e), and (g). ..., motorboats, dog teams, and other means of surface transportation traditionally employed by local rural... of snowmobiles, motorboats, dog teams, and other means of surface transportation...

  20. Modeling sheet-flow sand transport under progressive surface waves

    NARCIS (Netherlands)

    Kranenburg, W.M.

    2013-01-01

    In the near-shore zone, energetic sea waves generate sheet-flow sand transport. In present day coastal models, wave-induced sheet-flow sand transport rates are usually predicted with semi-empirical transport formulas, based on extensive research on this phenomenon in oscillatory flow tunnels. Howeve

  1. Surface trap mediated electronic transport in biofunctionalized silicon nanowires

    Science.gov (United States)

    Puppo, F.; Traversa, F. L.; Di Ventra, M.; De Micheli, G.; Carrara, S.

    2016-08-01

    Silicon nanowires (SiNWs), fabricated via a top-down approach and then functionalized with biological probes, are used for electrically-based sensing of breast tumor markers. The SiNWs, featuring memristive-like behavior in bare conditions, show, in the presence of biomarkers, modified hysteresis and, more importantly, a voltage memory component, namely a voltage gap. The voltage gap is demonstrated to be a novel and powerful parameter of detection thanks to its high-resolution dependence on charges in proximity of the wire. This unique approach of sensing has never been studied and adopted before. Here, we propose a physical model of the surface electronic transport in Schottky barrier SiNW biosensors, aiming at reproducing and understanding the voltage gap based behavior. The implemented model describes well the experimental I-V characteristics of the device. It also links the modification of the voltage gap to the changing concentration of antigens by showing the decrease of this parameter in response to increasing concentrations of the molecules that are detected with femtomolar resolution in real human samples. Both experiments and simulations highlight the predominant role of the dynamic recombination of the nanowire surface states, with the incoming external charges from bio-species, in the appearance and modification of the voltage gap. Finally, thanks to its compactness, and strict correlation with the physics of the nanodevice, this model can be used to describe and predict the I-V characteristics in other nanostructured devices, for different than antibody-based sensing as well as electronic applications.

  2. SAFETY

    CERN Document Server

    Niels Dupont

    2013-01-01

    CERN Safety rules and Radiation Protection at CMS The CERN Safety rules are defined by the Occupational Health & Safety and Environmental Protection Unit (HSE Unit), CERN’s institutional authority and central Safety organ attached to the Director General. In particular the Radiation Protection group (DGS-RP1) ensures that personnel on the CERN sites and the public are protected from potentially harmful effects of ionising radiation linked to CERN activities. The RP Group fulfils its mandate in collaboration with the CERN departments owning or operating sources of ionising radiation and having the responsibility for Radiation Safety of these sources. The specific responsibilities concerning "Radiation Safety" and "Radiation Protection" are delegated as follows: Radiation Safety is the responsibility of every CERN Department owning radiation sources or using radiation sources put at its disposition. These Departments are in charge of implementing the requi...

  3. Literature Survey of Crude Oil Properties Relevant to Handling and Fire Safety in Transport.

    Energy Technology Data Exchange (ETDEWEB)

    Lord, David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Luketa, Anay [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wocken, Chad [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Schlasner, Steve [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Aulich, Ted [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Allen, Ray [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rudeen, David Keith [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-03-01

    Several fiery rail accidents in 2013-2015 in the U.S. and Canada carrying crude oil produced from the Bakken region of North Dakota have raised questions at many levels on the safety of transporting this, and other types of crude oil, by rail. Sandia National Laboratories was commissioned by the U.S. Department of Energy to investigate the material properties of crude oils, and in particular the so-called "tight oils" like Bakken that comprise the majority of crude oil rail shipments in the U.S. at the current time. The current report is a literature survey of public sources of information on crude oil properties that have some bearing on the likelihood or severity of combustion events that may occur around spills associated with rail transport. The report also contains background information including a review of the notional "tight oil" field operating environment, as well a basic description of crude oils and potential combustion events in rail transport. This page intentionally blank

  4. Who is in control of road safety? A STAMP control structure analysis of the road transport system in Queensland, Australia.

    Science.gov (United States)

    Salmon, Paul M; Read, Gemma J M; Stevens, Nicholas J

    2016-11-01

    Despite significant progress, road trauma continues to represent a global safety issue. In Queensland (Qld), Australia, there is currently a focus on preventing the 'fatal five' behaviours underpinning road trauma (drug and drink driving, distraction, seat belt wearing, speeding, and fatigue), along with an emphasis on a shared responsibility for road safety that spans road users, vehicle manufacturers, designers, policy makers etc. The aim of this article is to clarify who shares the responsibility for road safety in Qld and to determine what control measures are enacted to prevent the fatal five behaviours. This is achieved through the presentation of a control structure model that depicts the actors and organisations within the Qld road transport system along with the control and feedback relationships that exist between them. Validated through a Delphi study, the model shows a diverse set of actors and organisations who share the responsibility for road safety that goes beyond those discussed in road safety policies and strategies. The analysis also shows that, compared to other safety critical domains, there are less formal control structures in road transport and that opportunities exist to add new controls and strengthen existing ones. Relationships that influence rather than control are also prominent. Finally, when compared to other safety critical domains, the strength of road safety controls is brought into question.

  5. Safety

    CERN Multimedia

    2003-01-01

    Please note that the safety codes A9, A10 AND A11 (ex annexes of SAPOCO/42) entitled respectively "Safety responsibilities in the divisions" "The safety policy committee (SAPOCO) and safety officers' committees" and "Administrative procedure following a serious accident or incident" are available on the web at the following URLs: Code A9: http://edms.cern.ch/document/337016/LAST_RELEASED Code A10: http://edms.cern.ch/document/337019/LAST_RELEASED Code A11: http://edms.cern.ch/document/337026/LAST_RELEASED Paper copies can also be obtained from the TIS divisional secretariat, e-mail: tis.secretariat@cern.ch. TIS Secretariat

  6. Study on creation and destruction of transport barriers via effective safety factors for energetic particles

    CERN Document Server

    Ogawa, Shun; Dif-Pradalier, Guilhem; Garbet, Xavier

    2016-01-01

    Charged particles with low kinetic energy move along magnetic field lines, but so do not energetic particles. We investigate the topological structure changes in the phase space of energetic particles with respect to the magnetic one. For this study cylindrical magnetic fields with non-monotonic safety factors that induce the magnetic internal transport barrier are considered. We show that the topological structure of the magnetic field line and of the particle trajectories can be quite different. We explain this difference using the concept of effective particle $q$-profile. Using this notion we can investigate the location and existence of resonances for particle orbits that are different from the magnetic ones. These are examined both numerically by integrating an equation of motion and theoretically by use of Alfv\\'en's guiding center theory and by use of the effective reduced Hamiltonian for the integrable unperturbed system. It is clarified that, for the energetic particles, the grad $B$ drift effect sh...

  7. Development and implementation of a dam safety program for Manitoba Infrastructure and Transportation

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, Ninel S.; McLean, Angela D. [Manitoba infrastructure and transportation, Winnipeg, (Canada)

    2010-07-01

    Responsibility for the operation and maintenance of provincial dams has been transferred, at the province's initiative, to Manitoba Infrastructure and Transportation (MIT). MIT used the 2007 CDA guidelines as reference in the development of a dam safety program for provincial dams in response to the lack of provincial legislation for the regulation and management of dams in Manitoba. This paper presented the work of the MIT to develop and implement a management system, with emphasis on the planning and implementation elements. MIT focused on both the prioritization of work and the implementation of an inspection program. To develop a prioritization scheme, a risk assessment was performed with the estimation of risk based on the impact of an event occurring and integrating the quality of the controls in place. Multiple account analysis (MAA) was also used to develop a second prioritization plan.

  8. Natural gas pipeline transportation safety countermeasures%天然气管道安全输送对策分析

    Institute of Scientific and Technical Information of China (English)

    唐平

    2016-01-01

    For natural gas pipeline transportation safety problems in the process are analyzed,and proposed to improve the level of natural gas pipeline transportation safety and effective measures designed to contribute to a healthy development of China’s natural gas industry.%针对天然气管道安全输送过程中存在的问题进行了分析,并提出了提高天然气管道安全输送水平的有效对策,旨在为我国天然气产业的健康发展贡献一份力量。

  9. Safety Assessment Methodologies and Their Application in Development of Near Surface Waste Disposal Facilities--ASAM Project

    Energy Technology Data Exchange (ETDEWEB)

    Batandjieva, B.; Metcalf, P.

    2003-02-25

    Safety of near surface disposal facilities is a primary focus and objective of stakeholders involved in radioactive waste management of low and intermediate level waste and safety assessment is an important tool contributing to the evaluation and demonstration of the overall safety of these facilities. It plays significant role in different stages of development of these facilities (site characterization, design, operation, closure) and especially for those facilities for which safety assessment has not been performed or safety has not been demonstrated yet and the future has not been decided. Safety assessments also create the basis for the safety arguments presented to nuclear regulators, public and other interested parties in respect of the safety of existing facilities, the measures to upgrade existing facilities and development of new facilities. The International Atomic Energy Agency (IAEA) has initiated a number of research coordinated projects in the field of development and improvement of approaches to safety assessment and methodologies for safety assessment of near surface disposal facilities, such as NSARS (Near Surface Radioactive Waste Disposal Safety Assessment Reliability Study) and ISAM (Improvement of Safety Assessment Methodologies for Near Surface Disposal Facilities) projects. These projects were very successful and showed that there is a need to promote the consistent application of the safety assessment methodologies and to explore approaches to regulatory review of safety assessments and safety cases in order to make safety related decisions. These objectives have been the basis of the IAEA follow up coordinated research project--ASAM (Application of Safety Assessment Methodologies for Near Surface Disposal Facilities), which will commence in November 2002 and continue for a period of three years.

  10. Surface charge-specific interactions between polymer nanoparticles and ABC transporters in Caco-2 cells

    NARCIS (Netherlands)

    Bhattacharjee, S.; Opstal, van E.J.; Alink, G.M.; Marcelis, A.T.M.; Zuilhof, H.; Rietjens, I.M.C.M.

    2013-01-01

    The surface charge-dependent transport of polymeric nanoparticles (PNPs) across Caco-2 monolayers grown on transwell culture systems as an in vitro model for intestinal transport was tested. The transport of well-characterized, monodisperse, and fluorescent tri-block copolymer nanoparticles (TCNPs/s

  11. Predicting Solar Cycle 25 using Surface Flux Transport Model

    Science.gov (United States)

    Imada, Shinsuke; Iijima, Haruhisa; Hotta, Hideyuki; Shiota, Daiko; Kusano, Kanya

    2017-08-01

    It is thought that the longer-term variations of the solar activity may affect the Earth’s climate. Therefore, predicting the next solar cycle is crucial for the forecast of the “solar-terrestrial environment”. To build prediction schemes for the next solar cycle is a key for the long-term space weather study. Recently, the relationship between polar magnetic field at the solar minimum and next solar activity is intensively discussed. Because we can determine the polar magnetic field at the solar minimum roughly 3 years before the next solar maximum, we may discuss the next solar cycle 3years before. Further, the longer term (~5 years) prediction might be achieved by estimating the polar magnetic field with the Surface Flux Transport (SFT) model. Now, we are developing a prediction scheme by SFT model as a part of the PSTEP (Project for Solar-Terrestrial Environment Prediction) and adapting to the Cycle 25 prediction. The predicted polar field strength of Cycle 24/25 minimum is several tens of percent smaller than Cycle 23/24 minimum. The result suggests that the amplitude of Cycle 25 is weaker than the current cycle. We also try to obtain the meridional flow, differential rotation, and turbulent diffusivity from recent modern observations (Hinode and Solar Dynamics Observatory). These parameters will be used in the SFT models to predict the polar magnetic fields strength at the solar minimum. In this presentation, we will explain the outline of our strategy to predict the next solar cycle and discuss the initial results for Cycle 25 prediction.

  12. Fundamentals of Melt-Water Interfacial Transport Phenomena: Improved Understanding for Innovative Safety Technologies in ALWRs

    Energy Technology Data Exchange (ETDEWEB)

    M. Anderson; M. Corradini; K.Y. Bank; R. Bonazza; D. Cho

    2005-04-26

    The interaction and mixing of high-temperature melt and water is the important technical issue in the safety assessment of water-cooled reactors to achieve ultimate core coolability. For specific advanced light water reactor (ALWR) designs, deliberate mixing of the core-melt and water is being considered as a mitigative measure, to assure ex-vessel core coolability. The goal of this work is to provide the fundamental understanding needed for melt-water interfacial transport phenomena, thus enabling the development of innovative safety technologies for advanced LWRs that will assure ex-vessel core coolability. The work considers the ex-vessel coolability phenomena in two stages. The first stage is the melt quenching process and is being addressed by Argonne National Lab and University of Wisconsin in modified test facilities. Given a quenched melt in the form of solidified debris, the second stage is to characterize the long-term debris cooling process and is being addressed by Korean Maritime University in via test and analyses. We then address the appropriate scaling and design methodologies for reactor applications.

  13. Preventive measures for safety and helth at work with the amphibious transporter PTS-M

    Directory of Open Access Journals (Sweden)

    Nenad V. Kovačević

    2014-04-01

    Full Text Available Nowadays, the knowledge of using the amphibious transporter STM-M ( STM-M is very limited. A small number of professional soldiers in the Serbian Armed Forces know how to use thisvery useful and high-quality military vehicle in a regular way. From the day onethis vehicle has remained in its basic shape without any modifications since it was made in the former Soviet Union. Today, the Serbian Armed Forces have only 12 of these vehicles in the operational use. The Serbian Armed Forces have two amphibious platoons in two pontoon batalions in the River Flotilla. As the author of this article was an officer in charge of maintaining this complex and “unusual” vehicle, the article deals with the provisions from the Regulations on preventive measures for safety and health while using work equipment (Ministry of Labour, 2012, applied to work with STM-Ms, The article makes a parallel between the provisions of the Regulations and the actual situation and specific conditions of using and maintaining STM-Ms . Introduction Some basic information about the STM-M is given here, twith Figure 1 of this vehicle and its tactical and technicalspecifications.The dangerous places onthe vehicle are presented as well. Mesuares and rules for safe work This part ofthe article presents all speciall tools on the STM-M that are used for safe work. Each piece of tool is described in detail -itslocationon the STM-M, its physical characteristics,  and most common mistakes during its use. Some measures for better maintenance and improved safety at work are also proposed. Conclusion The conclusion deals with the misuse and wrong maintenance of STM-Ms and gives some proposals for their better use. A critical commentary about the conditions of safety engineering in the Serbian Armed Forces can be found here as well.  

  14. Surface and subsurface inspection of food safety and quality using a line-scan Raman system

    Science.gov (United States)

    This paper presents a line-scan Raman platform for food safety and quality research, which can be configured for Raman chemical imaging (RCI) mode for surface inspection and spatially offset Raman spectroscopy (SORS) mode for subsurface inspection. In the RCI mode, macro-scale imaging was achieved u...

  15. Safety evaluation for packaging transportation of equipment for tank 241-C-106 waste sluicing system

    Energy Technology Data Exchange (ETDEWEB)

    Calmus, D.B.

    1994-08-25

    A Waste Sluicing System (WSS) is scheduled for installation in nd waste storage tank 241-C-106 (106-C). The WSS will transfer high rating sludge from single shell tank 106-C to double shell waste tank 241-AY-102 (102-AY). Prior to installation of the WSS, a heel pump and a transfer pump will be removed from tank 106-C and an agitator pump will be removed from tank 102-AY. Special flexible receivers will be used to contain the pumps during removal from the tanks. After equipment removal, the flexible receivers will be placed in separate containers (packagings). The packaging and contents (packages) will be transferred from the Tank Farms to the Central Waste Complex (CWC) for interim storage and then to T Plant for evaluation and processing for final disposition. Two sizes of packagings will be provided for transferring the equipment from the Tank Farms to the interim storage facility. The packagings will be designated as the WSSP-1 and WSSP-2 packagings throughout the remainder of this Safety Evaluation for Packaging (SEP). The WSSP-1 packagings will transport the heel and transfer pumps from 106-C and the WSSP-2 packaging will transport the agitator pump from 102-AY. The WSSP-1 and WSSP-2 packagings are similar except for the length.

  16. Testing of LWR fuel rods to support criticality safety analysis of transport accident conditions

    Energy Technology Data Exchange (ETDEWEB)

    Purcell, P.C. [BNFL International Transport, Spent Fuel Services (United Kingdom); Dallongeville, M. [COGEMA Logistics (AREVA Group) (France)

    2004-07-01

    For the transport of low enriched materials, criticality safety may be demonstrated by applying pessimistic modelling assumptions that bound any realistic case. Where Light Water Reactor (LWR) fuel is being transported, enrichment levels are usually too high to permit this approach and more realistic data is needed. This requires a method by which the response of LWR fuel under impact accident conditions can be approximated or bounded. In 2000, BNFL and COGEMA LOGISTICS jointly commenced the Fuel Integrity Project (FIP) whose objective was to develop such methods. COGEMA LOGISTICS were well advanced with a method for determining the impact response of unirradiated fuel, but required further test data before acceptance by the Transport Regulators. The joint project team extensively discussed the required inputs to the FIP, from which it was agreed that BNFL would organise new tests on both unirradiated and irradiated fuel samples and COGEMA LOGISTICS would take major responsibility for evaluating the test results. Tests on unirradiated fuel rod samples involved both dynamic and quasi-static loading on fuel samples. PWR fuel rods loaded with uranium pellets were dropped vertically from 9m onto a rigid target and this was repeated on BWR fuel rods, similar tests on empty fuel rods were also conducted. Quasi-static tests were conducted on 530 mm long PWR and BWR fuel specimens under axial loading. Tests on irradiated fuel samples were conducted on high burn-up fuel rods of both PWR and BWR types. These were believed original to the FIP project and involved applying bending loads to simply supported pressurised rod specimens. In one test the fuel rod was heated to nearly 500oC during loading, all specimens were subject to axial impact before testing. Considerable experience of fuel rod testing and new data was gained from this test programme.

  17. Laboratory studies of aeolian sediment transport processes on planetary surfaces

    Science.gov (United States)

    Rasmussen, Keld R.; Valance, Alexandre; Merrison, Jonathan

    2015-09-01

    , but not all, older or recent wind tunnel observations. Similarly some measurements performed with uniform sand samples having grain diameters of the order of 0.25-0.40 mm indicate that ripple spacing depends on friction velocity in a similar way as particle jump length. The observations are thus in agreement with a recent ripple model that link the typical jump length to ripple spacing. A possible explanation for contradictory observations in some experiments may be that long observation sequences are required in order to assure that equilibrium exists between ripple geometry and wind flow. Quantitative understanding of saltation characteristics on Mars still lacks important elements. Based upon image analysis and numerical predictions, aeolian ripples have been thought to consist of relatively large grains (diameter > 0.6 mm) and that saltation occurs at high wind speeds (> 26 m/s) involving trajectories that are significantly longer than those on Earth (by a factor of 10-100). However, this is not supported by recent observations from the surface of Mars, which shows that active ripples in their geometry and composition have characteristics compatible with those of terrestrial ripples (Sullivan et al., 2008). Also the highest average wind speeds on Mars have been measured to be terrestrial conditions electric fields typically observed are not intense enough to significantly affect sand transport rates while little is known in the case of extra-terrestrial environments.

  18. Using a Wheelchair as a Seat in a Motor Vehicle: An Overview of Wheelchair Transportation Safety and Related Standards

    Science.gov (United States)

    Schneider, Larry

    2007-01-01

    This is the first of a series of six articles on the topic of transportation safety for wheelchair-seated travelers and will highlight some of the basic issues and principles that have been considered in the development of voluntary standards for wheelchair tiedown and occupant restraints systems (WTORS) as well as for wheelchairs that are used as…

  19. The Design of a Patient Transportation Robot's Lifting Arms Considering Comfort and Safety without the Presence of a Sheet

    Directory of Open Access Journals (Sweden)

    Yong-Hoon Lee

    2011-01-01

    Full Text Available A transportation robot's lifting arms have an effect on the comfort and safety of patients. Improved arms have been designed through dynamic and static analyses to increase safety if a sheet not present on the lifting arms. To design the lifting arms, experimentation is very helpful, however, it is difficult and dangerous to experiment on patients; therefore, a simple human model was made and used for the dynamic analysis. Through the dynamic analysis results, a safe width and comfortable location for the lifting arms were determined. The thickness was then determined by static analysis and optimum design. In addition, tests have been conducted to confirm comfort and safety by deploying the designed lifting arms onto a transportation robot.

  20. The effect of surface transport on water desalination by porous electrodes undergoing capacitive charging

    CERN Document Server

    Shocron, Amit N

    2016-01-01

    Capacitive deionization (CDI) is a technology in which water is desalinated by ion electrosorption into the electric double layers (EDLs) of charging porous electrodes. In recent years significant advances have been made in modeling the charge and salt dynamics in a CDI cell, but the possible effect of surface transport within diffuse EDLs on these dynamics has not been investigated. We here present theory which includes surface transport in describing the dynamics of a charging CDI cell. Through our numerical solution to the presented models, the possible effect of surface transport on the CDI process is elucidated. While at some model conditions surface transport enhances the rate of CDI cell charging, counter-intuitively this additional transport pathway is found to slow down cell charging at other model conditions.

  1. Surface electronic transport measurements: A micro multi-point probe approach

    DEFF Research Database (Denmark)

    Barreto, Lucas

    2014-01-01

    setup, but the terminology used and data analysis were also ameliorated in order to simplify the interpretation of the results. We used the mentioned technique in the following projects: • The electronic transport dimensionality of epitaxial grahene grown on SiC is detected and important physical......This work is mostly focused on the study of electronic transport properties of two-dimensional materials, in particular graphene and topological insulators. To study these, we have improved a unique micro multi-point probe instrument used to perform transport measurements. Not only the experimental...... a direct measurement of the surface electronic transport on a bulk topological insulator. The surface state conductivity and mobility are obtained. Apart from transport properties, we also investigate the atomic structure of the Bi2Se3(111) surface via surface x-ray diraction and low-energy electron...

  2. Aeolian transport in the field: A comparison of the effects of different surface treatments

    Science.gov (United States)

    Dong, Zhibao; Lv, Ping; Zhang, Zhengcai; Qian, Guangqiang; Luo, Wanyin

    2012-05-01

    Aeolian transport represents the result of wind-surface interactions, and therefore depends strongly on variations in the characteristics of the sediment surface. We conducted field observations of aeolian transport of typical dune sand in three 80 m × 80 m plots with different surface treatments: gravel-covered sand, enclosed shifting sand, and open (unprotected) shifting sand. The study was performed at the Shapotou Aeolian Experiment Site in the southeastern part of China's Tengger Desert to compare the effects of these different surface treatments on aeolian transport. To do so, we analyzed the flux density profiles and transport rates above each surface. The flux density profiles for all three treatments followed the exponential decay law that was proposed by most previous researchers to describe the saltation flux density profiles. Coefficients of the exponential decay function were defined as a function of the surface and the wind velocity. The enclosed and open plots with shifting sand had similar flux density profiles, but the flux density above gravel-covered plots showed that transport decayed more slowly with increasing height, producing flux density profiles with a higher average saltation height. The transport rate above the three treatment plots tended to increase proportionally with the cube of the mean wind velocity and with the maximum wind velocity during the observation period, but was more strongly correlated with the square of drift potential. Transport rates above the plot with open shifting sand were greater than those above the plots with enclosed shifting sand and the gravel-covered plot.

  3. Health and Safety Aspects of Solid Biomass Storage, Transportation and Feeding

    Energy Technology Data Exchange (ETDEWEB)

    Koppejan, J. [Procede Biomass, Enschede (Netherlands); Loennermark, A.; Persson, H.; Larsson, I.; Blomqvist, P. [SP Technical Research Institute of Sweden, Boraas (Sweden); Arshadi, M.; Valencia-Reyes, E. [Swedish University of Agricultural Sciences, Uppsala (Sweden); Melin, S. [University of British Columbia, Vancouver, BC (Canada); Howes, Pat [AEA Group, London (United Kingdom); Wheeler, P. [Lend Lease, Sydney (Australia); Baxter, D. [Joint Research Institute JRC, European Commission EC, Brussels (Belgium); Nikolaisen, L. [Danish Technological Institute, Taastrup (Denmark)

    2013-05-15

    This publication focuses on the health and safety issues of the supply chain of solid biofuels with the objective to highlight commonly used mitigation methodologies to promote a better working environment when dealing with solid biofuels. It has been compiled as a joint effort by experts active in Tasks 32, 36, 37 and 40 of the IEA Bioenergy Agreement, with their own specific fields of expertise. Only through this cooperation, it was possible to touch upon the full range of issues in one publication that one may come across when developing projects in which solid biomass fuels are produced, traded or used. The properties of a biomass material and the intended use determine how the material should be safely transported and stored. Selfheating, off-gassing and dust explosions are significant challenges for the industry that have already resulted in significant losses of capital investments and even tragic loss of life. Likewise, exposure to biologically active material, such as moulds and spores may form a serious hazard for the health of workers involved. With the growth of the bioenergy sector, it is important not only that opportunities for bioenergy are implemented in an efficient and economic manner, but also safely.

  4. A distributed wireless sensor network system for transportation safety and security

    Science.gov (United States)

    Chowdhury, Mashrur; Wang, Kuang-Ching; Fries, Ryan; Ma, Yongchang; Bagaria, Devang

    2007-04-01

    Given the anticipated increases in highway traffic, the scale and complexity of the traffic infrastructure will continue to grow progressively in time and in distributed geographical areas. To assure transportation efficiency, safety, and security in the presence of such growth, it is critical to identify an infrastructure development methodology that can adapt to expansions while assuring reliable operation for both centralized monitoring and distributed management. In this paper, a wireless sensor network design methodology is presented, aimed at providing effective distributed surveillance, anomaly detection, and coordinated response. The proposed methodology integrates state-of-the-art traffic sensors, with flexibly programmable controller devices that can integrate with the available traffic control equipments. The system methodology provides a paradigm in which sensors and controllers can be progressively incorporated and programmed to autonomously coordinate with peer sensors and a hierarchy of controllers to detect, notify, and react to anomalous events. Since the system can tolerate failure of parts of the system, as the network connectivity continues to increase, the proposed sensor network will have positive implications on evacuation plans during natural disasters or terrorist attacks. To illustrate the design methodology and usage, a simulated system along a freeway corridor in South Carolina was constructed in an integrated microscopic traffic and wireless sensor network simulation platform, in which distributed incident detection and response functions were implemented. The test results, including detection and false alarm rates and wireless communication latencies, are analyzed to identify insights of the system's operation and potential enhancement strategies.

  5. Addressing the Safety of Transportation Cyber-Physical Systems: Development and Validation of a Verbal Warning Utility Scale for Intelligent Transportation Systems

    Directory of Open Access Journals (Sweden)

    Yiqi Zhang

    2015-01-01

    Full Text Available As an important application of Cyber-Physical Systems (CPS, advances in intelligent transportation systems (ITS improve driving safety by informing drivers of hazards with warnings in advance. The evaluation of the warning effectiveness is an important issue in facilitating communication of ITS. The goal of the present study was to develop a scale to evaluate the warning utility, namely, the effectiveness of a warning in preventing accidents in general. A driving simulator study was conducted to validate the Verbal Warning Utility Scale (VWUS in a simulated driving environment. The reliability analysis indicated a good split-half reliability for the VWUS with a Spearman-Brown Coefficient of 0.873. The predictive validity of VWUS in measuring the effectiveness of the verbal warnings was verified by the significant prediction of safety benefits indicated by variables, including reduced kinetic energy and collision rate. Compared to conducting experimental studies, this scale provides a simpler way to evaluate overall utility of verbal warnings in communicating associated hazards in intelligent transportation systems. This scale can be further applied to improve the design of warnings of ITS in order to improve transportation safety. The applications of the scale in nonverbal warning situations and limitations of the current scale are also discussed.

  6. Roles of surface chemistry on safety and electrochemistry in lithium ion batteries.

    Science.gov (United States)

    Lee, Kyu Tae; Jeong, Sookyung; Cho, Jaephil

    2013-05-21

    Motivated by new applications including electric vehicles and the smart grid, interest in advanced lithium ion batteries has increased significantly over the past decade. Therefore, research in this field has intensified to produce safer devices with better electrochemical performance. Most research has focused on the development of new electrode materials through the optimization of bulk properties such as crystal structure, ionic diffusivity, and electric conductivity. More recently, researchers have also considered the surface properties of electrodes as critical factors for optimizing performance. In particular, the electrolyte decomposition at the electrode surface relates to both a lithium ion battery's electrochemical performance and safety. In this Account, we give an overview of the major developments in the area of surface chemistry for lithium ion batteries. These ideas will provide the basis for the design of advanced electrode materials. Initially, we present a brief background to lithium ion batteries such as major chemical components and reactions that occur in lithium ion batteries. Then, we highlight the role of surface chemistry in the safety of lithium ion batteries. We examine the thermal stability of cathode materials: For example, we discuss the oxygen generation from cathode materials and describe how cells can swell and heat up in response to specific conditions. We also demonstrate how coating the surfaces of electrodes can improve safety. The surface chemistry can also affect the electrochemistry of lithium ion batteries. The surface coating strategy improved the energy density and cycle performance for layered LiCoO2, xLi2MnO3·(1 - x)LiMO2 (M = Mn, Ni, Co, and their combinations), and LiMn2O4 spinel materials, and we describe a working mechanism for these enhancements. Although coating the surfaces of cathodes with inorganic materials such as metal oxides and phosphates improves the electrochemical performance and safety properties of

  7. Vehicle Emission Inspection and Maintenance (I/M) Provision in the Fixing America’s Surface Transportation (FAST) Act

    Science.gov (United States)

    This document is a memorandum regarding Vehicle Emission Inspection and Maintenance (I/M) Provision in Fixing America's Surface Transportation (FAST) Act, which provides long-term funding certainty for surface transportation infrastructure planning

  8. On Limiting Behavior of Contaminant Transport Models in Coupled Surface and Groundwater Flows

    Directory of Open Access Journals (Sweden)

    Vincent J. Ervin

    2015-11-01

    Full Text Available There has been a surge of work on models for coupling surface-water with groundwater flows which is at its core the Stokes-Darcy problem. The resulting (Stokes-Darcy fluid velocity is important because the flow transports contaminants. The analysis of models including the transport of contaminants has, however, focused on a quasi-static Stokes-Darcy model. Herein we consider the fully evolutionary system including contaminant transport and analyze its quasi-static limits.

  9. Serotonin-induced down-regulation of cell surface serotonin transporter

    DEFF Research Database (Denmark)

    Jørgensen, Trine Nygaard; Christensen, Peter Møller; Gether, Ulrik

    2014-01-01

    The serotonin transporter (SERT) terminates serotonergic signaling and enables refilling of synaptic vesicles by mediating reuptake of serotonin (5-HT) released into the synaptic cleft. The molecular and cellular mechanisms controlling SERT activity and surface expression are not fully understood...

  10. 75 FR 9638 - Surface Transportation Project Delivery Pilot Program; Caltrans Audit Report

    Science.gov (United States)

    2010-03-03

    ...; 49 CFR 1.48. Issued on: February 23, 2010. Victor M. Mendez, Administrator. Surface Transportation... Chapter 25 references FHWA Order 6640.2 FHWA Actions to address Environmental Justice in minority and...

  11. Safety assessment for the transportation of NECSA's LILW to the Vaalputs waste disposal facility

    Energy Technology Data Exchange (ETDEWEB)

    Maphoto, K.P.; Raubenheimer, E.; Swart, H. [Nuclear Liabilities Management, NECSA, P O Box 582, Pretoria, 0001 (South Africa)

    2008-07-01

    The transport safety assessment was carried out with a view to assess the impact on the environment and the people living in it, from exposure to radioactivity during transportation of the radioactive materials. It provides estimates of radiological risks associated with the envisaged transport scenarios for the road transport mode. This is done by calculating the human health impact and radiological risk from transportation of LILW along the R563 route, N14 and eventually to the Vaalputs National Waste Disposal Facility. Various parameters are needed by the RADTRAN code in calculating the human health impact and risk. These include: numbers of population densities following the routes undertaken, number of stops made, and the speed at which the transport will be traversing at towards the final destination. The human health impact with regard to the dose to the public, LCF and risk associated with transportation of Necsa's LILW to the Vaalputs Waste Disposal Facility by road have been calculated using RADTRAN 5 code. The results for both accident and incident free scenarios have shown that the overall risks are insignificant and can be associated with any non-radiological transportation. (authors)

  12. Transport Rate of Surface Erosion by the Hydrodynamics

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The coherence and exposure degree are used in analyzing initiation of slope sediment.The initial ve- locity is built by using a critical roiling model.A transport rate formula of slope erosion is established using the Meyer-Peter model.The formula is tested by experiment and agrees well but the errors are big when the flow discharge and rain intensity are smaller.

  13. 75 FR 28200 - Safety Zone; Washington State Department of Transportation Ferries Division Marine Rescue...

    Science.gov (United States)

    2010-05-20

    ... safety of the participating ferries, rescue vessels, and the maritime public during the exercise by... response organization specific to ferries in the Puget Sound area. This temporary safety zone will mitigate... SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; Washington State Department of...

  14. Enhanced Thermal Transport of Surfaces with Superhydrophobic Coatings

    Science.gov (United States)

    2015-07-01

    Deposition 4 3. Results/ Analysis 5 4. Conclusion 7 5. References 8 Distribution List 9 iv List of Figures Fig. 1 Contact angle...by measuring the contact angle (σ) formed between a droplet of liquid and the surface (Fig. 1). Qualitatively , surfaces with a water contact angle...several seconds and dried with filtered nitrogen. The samples were then immersed in 0.01-M aqueous solution of silver nitrate for 20 s. The deposition

  15. Towards an Electronic Dog Nose: Surface Plasmon Resonance Immunosensor for Security and Safety

    Directory of Open Access Journals (Sweden)

    Takeshi Onodera

    2014-09-01

    Full Text Available This review describes an “electronic dog nose” based on a surface plasmon resonance (SPR sensor and an antigen–antibody interaction for security and safety. We have concentrated on developing appropriate sensor surfaces for the SPR sensor for practical use. The review covers different surface fabrications, which all include variations of a self-assembled monolayer containing oligo(ethylene glycol, dendrimer, and hydrophilic polymer. We have carried out detection of explosives using the sensor surfaces. For the SPR sensor to detect explosives, the vapor or particles of the target substances have to be dissolved in a liquid. Therefore, we also review the development of sampling processes for explosives, and a protocol for the measurement of explosives on the SPR sensor in the field. Additionally, sensing elements, which have the potential to be applied for the electronic dog nose, are described.

  16. Interannual variability of surface and bottom sediment transport on the Laptev Sea shelf during summer

    Directory of Open Access Journals (Sweden)

    C. Wegner

    2012-09-01

    Full Text Available Sediment transport dynamics were studied during ice-free conditions under different atmospheric circulation regimes on the Laptev Sea shelf (Siberian Arctic. To study the interannual variability of suspended particulate matter (SPM dynamics and their coupling with the variability in surface river water distribution on the Laptev Sea detailed oceanographic, optical (turbidity and Ocean Color satellite data, and hydrochemical (nutrients, SPM, stable oxygen isotopes process studies were carried out continuously during the summers of 2007 and 2008. Thus, for the first time SPM and nutrient variations on the Laptev Sea shelf under different atmospheric forcing and the implications for the turbidity and transparency of the water column can be presented.

    The data indicate a clear link between different surface distributions of riverine waters and the SPM transport dynamics within the entire water column. The summer of 2007 was dominated by shoreward winds and an eastward transport of riverine surface waters. The surface SPM concentration on the south-eastern inner shelf was elevated, which led to decreased transmissivity and increased light absorption. Surface SPM concentrations in the Central and Northern Laptev Sea were comparatively low. However, the SPM transport and concentration within the bottom nepheloid layer increased considerably on the entire eastern shelf. The summer of 2008 was dominated by offshore-winds and northwards transport of the river plume. The surface SPM transport was enhanced and extended onto the mid-shelf whereas the bottom SPM transport and concentration was diminished. This study suggests that the SPM concentration and transport in both, the surface and bottom nepheloid layers, are associated with the distribution of riverine surface waters which are linked to the atmospheric circulation patterns over the Laptev Sea and the adjacent Arctic Ocean during open water season. A continuing trend toward shoreward winds

  17. Safety assessment technology on the free drop impact and puncture analysis of the cask for radioactive material transport

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dew Hey [Korea Institute of Nuclear Safety, Taejon (Korea, Republic of); Lee, Young Shin; Ryu, Chung Hyun; Kim, Hyun Su; Lee, Ho Chul; Hong, Song Jin; Choi, Young Jin; Lee, Jae Hyung; Na, Jae Yun [Chungnam National Univ., Taejon (Korea, Republic of)

    2001-03-15

    In this study, the regulatory condition and analysis condition is analyzed for the free drop and puncture impact analysis to develop the safety assessment technology. Impact analysis is performed with finite element method which is one of the many analysis methods of the shipping cask. LS-DYNA3D and ABAQUS is suitable for the free drop and the puncture impact analysis of the shipping cask. For the analysis model, the KSC-4 that is the shipping cask to transport spent nuclear fuel is investigated. The results of both LS-DYNA3D and ABAQUS is completely corresponded. And The integrity of the shipping cask is verified. Using this study, the reliable safety assessment technology is supplied to the staff. The efficient and reliable regulatory tasks is performed using the standard safety assessment technology.

  18. Hydrogen mediated transport of Sn to Ru film surface

    NARCIS (Netherlands)

    Faradzhev, N.; Sidorkin, V.

    2009-01-01

    The authors report on the interaction of atomic hydrogen with Sn and thin Ru film at room temperature. The study is done using a combination of photoelectron and low energy ion scattering spectroscopies as well as scanning electron microscopy. The adsorption of hydrogen on a Sn surface leads to the

  19. Hydrogen mediated transport of Sn to Ru film surface

    NARCIS (Netherlands)

    Faradzhev, N.; Sidorkin, V.

    2009-01-01

    The authors report on the interaction of atomic hydrogen with Sn and thin Ru film at room temperature. The study is done using a combination of photoelectron and low energy ion scattering spectroscopies as well as scanning electron microscopy. The adsorption of hydrogen on a Sn surface leads to the

  20. Transport mechanism of an initially spherical droplet on a combined hydrophilic/hydrophobic surface

    Energy Technology Data Exchange (ETDEWEB)

    Myong, Hyon Kook; Kwon, Young Hoo [Dept. of Mechanical Engineering, Kookmin University, Seoul (Korea, Republic of)

    2015-11-15

    Fluid transport is a key issue in the development of microfluidic systems. Recently, Myong (2014) has proposed a new concept for droplet transport without external power sources, and numerically validated the results for a hypothetical 2D shape, initially having a hemicylindrical droplet shape. Myong and Kwon (2015) have also examined the transport mechanism for an actual water droplet, initially having a 3D hemispherical shape, on a horizontal hydrophilic/hydrophobic surface, based on the numerical results of the time evolution of the droplet shape, as well as the total kinetic, gravitational, pressure and surface free energies inside the droplet. In this study, a 3D numerical analysis of an initially spherical droplet is carried out to establish a new concept for droplet transport. Further, the transport mechanism of an actual water droplet is examined in detail from the viewpoint of the capillarity force imbalance through the numerical results of droplet shape and various energies inside the droplet.

  1. Modeling Fate and Transport of Rotavirus in Surface Flow by Integrating WEPP and a Pathogen Transport Model

    Science.gov (United States)

    Bhattarai, R.; Kalita, P. K.; Davidson, P. C.; Kuhlenschmidt, M. S.

    2012-12-01

    More than 3.5 million people die each year from a water related diseases in this world. Every 20 seconds, a child dies from a water-related illness. Even in a developed country like the United States, there have been at least 1870 outbreaks associated with drinking water during the period of 1920 to 2002, causing 883,806 illnesses. Most of these outbreaks are resulted due to the presence of microbial pathogens in drinking water. Rotavirus infection has been recognized as the most common cause of diarrhea in young children throughout the world. Laboratory experiments conducted at the University of Illinois have demonstrated that recovery of rotavirus has been significantly affected by climatic and soil-surface conditions like slope, soil types, and ground cover. The objective of this study is to simulate the fate and transport of Rotavirus in overland and near-surface flow using a process-based model. In order to capture the dynamics of sediment-bound pathogens, the Water Erosion Prediction Project (WEPP) is coupled with the pathogen transport model. Transport of pathogens in overland flow can be simulated mathematically by including terms for the concentration of the pathogens in the liquid phase (in suspension or free-floating) and the solid phase (adsorbed to the fine solid particles like clay and silt). Advection, adsorption, and decay processes are considered. The mass balance equations are solved using numerical technique to predict spatial and temporal changes in pathogen concentrations in two phases. Outputs from WEPP simulations (flow velocity, depth, saturated conductivity and the soil particle fraction exiting in flow) are transferred as input for the pathogen transport model. Three soil types and three different surface cover conditions have been used in the experimental investigations. Results from these conditions have been used in calibrating and validating the simulation results. Bare surface conditions have produced very good agreement between

  2. New Surface Properties in Porcelain Gres Tiles with a Look to Human and Environmental Safety

    Directory of Open Access Journals (Sweden)

    C. L. Bianchi

    2012-01-01

    Full Text Available Traditional photocatalysis is here brought forward for both the use of nanosized TiO2 crystallites and the possibility to have a release of TiO2 particles during the final use of the manufactured products. In the present paper both the preparation and characterization of a new generation of photocatalytic tiles are presented. The originality of these products is the surface presence of microsized TiO2 as it is not clear yet the impact of the nanoparticles on both human and environmental safety. TiO2 is here mixed with a silica compound and the final thermal treatment at 680°C allows the complete surface vitrification which, in turn, makes the tiles surface strongly resistant to abrasion. Photocatalytic efficiency towards the degradation of NOx in gas phase was measured in both a batch and a plug-flow reactor. The latter reactor configuration was also modeled by digital simulations.

  3. Spatial Transport of Magnetic Flux Surfaces in Strongly Anisotropic Turbulence

    Science.gov (United States)

    Matthaeus, W. H.; Servidio, S.; Wan, M.; Ruffolo, D. J.; Rappazzo, A. F.; Oughton, S.

    2013-12-01

    Magnetic flux surfaces afford familiar descriptions of spatial structure, dynamics, and connectivity of magnetic fields, with particular relevance in contexts such as solar coronal flux tubes, magnetic field connectivity in the interplanetary and interstellar medium, as well as in laboratory plasmas and dynamo problems [1-4]. Typical models assume that field-lines are orderly, and flux tubes remain identifiable over macroscopic distances; however, a previous study has shown that flux tubes shred in the presence of fluctuations, typically losing identity after several correlation scales [5]. Here, the structure of magnetic flux surfaces is numerically investigated in a reduced magnetohydrodynamic (RMHD) model of homogeneous turbulence. Short and long-wavelength behavior is studied statistically by propagating magnetic surfaces along the mean field. At small scales magnetic surfaces become complex, experiencing an exponential thinning. At large scales, instead, the magnetic flux undergoes a diffusive behavior. The link between the diffusion of the coarse-grained flux and field-line random walk is established by means of a multiple scale analysis. Both large and small scales limits are controlled by the Kubo number. These results have consequences for understanding and interpreting processes such as magnetic reconnection and field-line diffusion in plasmas [6]. [1] E. N. Parker, Cosmical Magnetic Fields (Oxford Univ. Press, New York, 1979). [2] J. R. Jokipii and E. N. Parker, Phys. Rev. Lett. 21, 44 (1968). [3] R. Bruno et al., Planet. Space Sci. 49, 1201 (2001). [4] M. N. Rosenbluth et al., Nuclear Fusion 6, 297 (1966). [5] W. H. Matthaeus et al., Phys. Rev. Lett. 75, 2136 (1995). [6] S. Servidio et al., submitted (2013).

  4. SAFETY

    CERN Multimedia

    M. Plagge, C. Schaefer and N. Dupont

    2013-01-01

    Fire Safety – Essential for a particle detector The CMS detector is a marvel of high technology, one of the most precise particle measurement devices we have built until now. Of course it has to be protected from external and internal incidents like the ones that can occur from fires. Due to the fire load, the permanent availability of oxygen and the presence of various ignition sources mostly based on electricity this has to be addressed. Starting from the beam pipe towards the magnet coil, the detector is protected by flooding it with pure gaseous nitrogen during operation. The outer shell of CMS, namely the yoke and the muon chambers are then covered by an emergency inertion system also based on nitrogen. To ensure maximum fire safety, all materials used comply with the CERN regulations IS 23 and IS 41 with only a few exceptions. Every piece of the 30-tonne polyethylene shielding is high-density material, borated, boxed within steel and coated with intumescent (a paint that creates a thick co...

  5. SAFETY

    CERN Multimedia

    C. Schaefer and N. Dupont

    2013-01-01

      “Safety is the highest priority”: this statement from CERN is endorsed by the CMS management. An interpretation of this statement may bring you to the conclusion that you should stop working in order to avoid risks. If the safety is the priority, work is not! This would be a misunderstanding and misinterpretation. One should understand that “working safely” or “operating safely” is the priority at CERN. CERN personnel are exposed to different hazards on many levels on a daily basis. However, risk analyses and assessments are done in order to limit the number and the gravity of accidents. For example, this process takes place each time you cross the road. The hazard is the moving vehicle, the stake is you and the risk might be the risk of collision between both. The same principle has to be applied during our daily work. In particular, keeping in mind the general principles of prevention defined in the late 1980s. These principles wer...

  6. Electrical transport properties of graphene on SiO2 with specific surface structures

    OpenAIRE

    Nagashio, K.; Yamashita, T; Nishimura, T.; K. Kita; Toriumi, A.

    2011-01-01

    The mobility of graphene transferred on a SiO2/Si substrate is limited to ~10,000 cm2/Vs. Without understanding the graphene/SiO2 interaction, it is difficult to improve the electrical transport properties. Although surface structures on SiO2 such as silanol and siloxane groups are recognized, the relation between the surface treatment of SiO2 and graphene characteristics has not yet been elucidated. This paper discusses the electrical transport properties of graphene on specific surface stru...

  7. Interplay between hydrophilicity and surface barriers on water transport in zeolite membranes

    Science.gov (United States)

    Fasano, Matteo; Humplik, Thomas; Bevilacqua, Alessio; Tsapatsis, Michael; Chiavazzo, Eliodoro; Wang, Evelyn N.; Asinari, Pietro

    2016-10-01

    A comprehensive understanding of molecular transport within nanoporous materials remains elusive in a broad variety of engineering and biomedical applications. Here, experiments and atomistic simulations are synergically used to elucidate the non-trivial interplay between nanopore hydrophilicity and surface barriers on the overall water transport through zeolite crystals. At these nanometre-length scales, these results highlight the dominating effect of surface imperfections with reduced permeability on the overall water transport. A simple diffusion resistance model is shown to be sufficient to capture the effects of both intracrystalline and surface diffusion resistances, thus properly linking simulation to experimental evidence. This work suggests that future experimental work should focus on eliminating/overcoming these surface imperfections, which promise an order of magnitude improvement in permeability.

  8. Theory connecting nonlocal sediment transport, earth surface roughness, and the Sadler effect

    Science.gov (United States)

    Schumer, Rina; Taloni, Alessandro; Furbish, David Jon

    2017-03-01

    Earth surface evolution, like many natural phenomena typified by fluctuations on a wide range of scales and deterministic smoothing, results in a statistically rough surface. We present theory demonstrating that scaling exponents of topographic and stratigraphic statistics arise from long-time averaging of noisy surface evolution rather than specific landscape evolution processes. This is demonstrated through use of "elastic" Langevin equations that generically describe disturbance from a flat earth surface using a noise term that is smoothed deterministically via sediment transport. When smoothing due to transport is a local process, the geologic record self organizes such that a specific Sadler effect and topographic power spectral density (PSD) emerge. Variations in PSD slope reflect the presence or absence and character of nonlocality of sediment transport. The range of observed stratigraphic Sadler slopes captures the same smoothing feature combined with the presence of long-range spatial correlation in topographic disturbance.

  9. Radioisotope thermoelectric generator transportation system safety analysis report for packaging. Volumes 1 and 2

    Energy Technology Data Exchange (ETDEWEB)

    Ferrell, P.C.

    1996-04-18

    This SARP describes the RTG Transportation System Package, a Type B(U) packaging system that is used to transport an RTG or similar payload. The payload, which is included in this SARP, is a generic, enveloping payload that specifically encompasses the General Purpose Heat Source (GPHS) RTG payload. The package consists of two independent containment systems mounted on a shock isolation transport skid and transported within an exclusive-use trailer.

  10. Surface charge-specific interactions between polymer nanoparticles and ABC transporters in Caco-2 cells

    Energy Technology Data Exchange (ETDEWEB)

    Bhattacharjee, Sourav, E-mail: sourav.bhattacharjee@wur.nl [Wageningen University, Laboratory of Organic Chemistry (Netherlands); Opstal, Edward J. van; Alink, Gerrit M. [Wageningen University, Division of Toxicology (Netherlands); Marcelis, Antonius T. M.; Zuilhof, Han [Wageningen University, Laboratory of Organic Chemistry (Netherlands); Rietjens, Ivonne M. C. M. [Wageningen University, Division of Toxicology (Netherlands)

    2013-06-15

    The surface charge-dependent transport of polymeric nanoparticles (PNPs) across Caco-2 monolayers grown on transwell culture systems as an in vitro model for intestinal transport was tested. The transport of well-characterized, monodisperse, and fluorescent tri-block copolymer nanoparticles (TCNPs/size {approx}45 nm) and polystyrene nanoparticles (PSNPs/size {approx}50 nm), with different surface charges (positive and negative), was quantified. The positive PNPs showed a higher intracellular uptake and flux across the Caco-2 monolayers than the negative PNPs. Multidrug resistance/P-glycoprotein (MDR1/P-gp), a specific ATP-binding cassette (ABC) transporter, was found to play a major role in the cellular efflux of positive PNPs, whereas the multidrug resistance protein 1 took part in the efflux of negative PNPs from Caco-2 cells. The positive PNPs also caused an increased cellular uptake and apical to basolateral transport of the carcinogen PhIP across the Caco-2 monolayer. The flavonoid quercetin, which is known to interact with ABC transporters, promoted the intracellular uptake of different PNPs and interfered with the normal distribution patterns of PNPs in the transwell system. These results indicate that PNPs display surface charge-specific interactions with ABC transporters and can even affect the bioavailability of toxic food-borne compounds (like pro-carcinogens).

  11. DOE Safety Metrics Indicator Program (SMIP) Fiscal Year 2000 Annual Report of Packaging- and Transportation-related Occurrences

    Energy Technology Data Exchange (ETDEWEB)

    Dickerson, L.S.

    2001-07-26

    The Oak Ridge National Laboratory (ORNL) has been charged by the DOE National Transportation Program (NTP) with the responsibility of retrieving reports and information pertaining to packaging and transportation (P&T) incidents from the centralized Occurrence Reporting and Processing System (ORPS) database. These selected reports have been analyzed for trends, impact on P&T operations and safety concerns, and lessons learned (LL) in P&T operations. This task is designed not only to keep the NTP aware of what is occurring at DOE sites on a periodic basis, but also to highlight potential P&T problems that may need management attention and allow dissemination of LL to DOE Operations Offices, with the subsequent flow of information to contractors. The Safety Metrics Indicator Program (SMIP) was established by the NTP in fiscal year (FY) 1998 as an initiative to develop a methodology for reporting occurrences with the appropriate metrics to show rates and trends. One of its chief goals has been to augment historical reporting of occurrence-based information and present more meaningful statistics for comparison of occurrences. To this end, the SMIP established a severity weighting system for the classification of the occurrences, which would allow normalization of the data and provide a basis for trending analyses. The process for application of this methodology is documented in the September 1999 report DOE Packaging and Transportation Measurement Methodology for the Safety Metrics Indicator Program (SMIP). This annual report contains information on those P&T-related occurrences reported to the ORPS during the period from October 1, 1999, through September 30, 2000. Only those incidents that occur in preparation for transport, during transport, and during unloading of hazardous material are considered as packaging- or transportation-related occurrences. Other incidents with P&T significance, but not involving hazardous material (such as vehicle accidents or empty

  12. 78 FR 59082 - Privacy Act of 1974; Department of Transportation, Federal Motor Carrier Safety Administration...

    Science.gov (United States)

    2013-09-25

    ... for their company and enforcement officers. Enforcement Management Information System (EMIS)--The EMIS... for FMCSA enforcement data. EMIS imports census files, investigatory files, driver/vehicle safety.../UNSATISFACTORY cases within EMIS resulting from Safety Rating letters generated by MCMIS. Analysis &...

  13. Regulatory review and confidence building in post-closure safety assessments and safety cases for near surface disposal facilities, IAEA ASAM coordinated research project

    Energy Technology Data Exchange (ETDEWEB)

    Belfadhel, M.B. [Canadian Nuclear Safety Commission, Waste and Geosciences Div., Ottawa, Ontario (Canada)]. E-mail: Benbelfadhelm@cnsc-ccsn.gc.ca; Bennett, D.G. [Galson Science Limited, Oakham (United Kingdom); Gonzales, A. [Iberdrola Ingeniera y Consultoria, Madrid (Spain); Metcalf, P. [International Atomic Energy Agency, Vienna (Austria); Nys, V. [Association Vincotte Nucleaire, Brussels (Belgium); Simeonov, G. [Nuclear Regulatory Agency, Sofia (Bulgaria); Zeleznik, N. [ARAO-Agency of Radwaste Management, Ljubljana (Slovenia)

    2006-07-01

    The IAEA successfully concluded a Coordinated Research Program (CRP) called ISAM, which focused on the development of an Improved Safety Assessment Methodology for near-surface radioactive waste disposal facilities (1997-2002). In November 2002, and as an extension of ISAM, the IAEA launched a new CRP called ASAM, designed to test the Application of the Safety Assessment Methodology by considering a range of near surface disposal facilities. The ASAM work programme is being implemented by three application working groups and two cross-cutting working groups. The application working groups are testing the applicability of the ISAM methodology by assessing an existing disposal facility in Hungary, a copper mine in South Africa, and a hypothetical facility containing heterogenous wastes, such as disused sealed sources. The first cross-cutting working group is addressing a number of technical issues that are common to all near-surface disposal facilities, while the second group, the Regulatory Review Working Group (RRWG) is developing guidance on how to gain confidence in safety assessments and safety cases, and on how to conduct regulatory reviews of safety assessments. This paper provides a brief overview of the work being conducted by the Regulatory Review Working Group. (author)

  14. Surface proton transport of fully protonated poly(aspartic acid) thin films on quartz substrates

    Energy Technology Data Exchange (ETDEWEB)

    Nagao, Yuki, E-mail: ynagao@jaist.ac.jp; Kubo, Takahiro

    2014-12-30

    Graphical abstract: - Highlights: • Proton transport of fully protonated poly(aspartic acid) thin film was investigated. • The thin film structure differed greatly from the partially protonated one. • Proton transport occurs on the surface, not inside of the thin film. • This result contributes to biological transport systems such as bacteriorhodopsin. - Abstract: Thin film structure and the proton transport property of fully protonated poly(aspartic acid) (P-Asp100) have been investigated. An earlier study assessed partially protonated poly(aspartic acid), highly oriented thin film structure and enhancement of the internal proton transport. In this study of P-Asp100, IR p-polarized multiple-angle incidence resolution (P-MAIR) spectra were measured to investigate the thin film structure. The obtained thin films, with thicknesses of 120–670 nm, had no oriented structure. Relative humidity dependence of the resistance, proton conductivity, and normalized resistance were examined to ascertain the proton transport property of P-Asp100 thin films. The obtained data showed that the proton transport of P-Asp100 thin films might occur on the surface, not inside of the thin film. This phenomenon might be related with the proton transport of the biological system.

  15. Ricci Curvature on Polyhedral Surfaces via Optimal Transportation

    Directory of Open Access Journals (Sweden)

    Benoît Loisel

    2014-03-01

    Full Text Available The problem of correctly defining geometric objects, such as the curvature, is a hard one in discrete geometry. In 2009, Ollivier defined a notion of curvature applicable to a wide category of measured metric spaces, in particular to graphs. He named it coarse Ricci curvature because it coincides, up to some given factor, with the classical Ricci curvature, when the space is a smooth manifold. Lin, Lu and Yau and Jost and Liu have used and extended this notion for graphs, giving estimates for the curvature and, hence, the diameter, in terms of the combinatorics. In this paper, we describe a method for computing the coarse Ricci curvature and give sharper results, in the specific, but crucial case of polyhedral surfaces.

  16. Response of the global surface ozone distribution to Northern Hemisphere sea surface temperature changes: implications for long-range transport

    Directory of Open Access Journals (Sweden)

    K. Yi

    2017-07-01

    Full Text Available The response of surface ozone (O3 concentrations to basin-scale warming and cooling of Northern Hemisphere oceans is investigated using the Community Earth System Model (CESM. Idealized, spatially uniform sea surface temperature (SST anomalies of ±1 °C are individually superimposed onto the North Pacific, North Atlantic, and North Indian oceans. Our simulations suggest large seasonal and regional variability in surface O3 in response to SST anomalies, especially in the boreal summer. The responses of surface O3 associated with basin-scale SST warming and cooling have similar magnitude but are opposite in sign. Increasing the SST by 1 °C in one of the oceans generally decreases the surface O3 concentrations from 1 to 5 ppbv. With fixed emissions, SST increases in a specific ocean basin in the Northern Hemisphere tend to increase the summertime surface O3 concentrations over upwind regions, accompanied by a widespread reduction over downwind continents. We implement the integrated process rate (IPR analysis in CESM and find that meteorological O3 transport in response to SST changes is the key process causing surface O3 perturbations in most cases. During the boreal summer, basin-scale SST warming facilitates the vertical transport of O3 to the surface over upwind regions while significantly reducing the vertical transport over downwind continents. This process, as confirmed by tagged CO-like tracers, indicates a considerable suppression of intercontinental O3 transport due to increased tropospheric stability at lower midlatitudes induced by SST changes. Conversely, the responses of chemical O3 production to regional SST warming can exert positive effects on surface O3 levels over highly polluted continents, except South Asia, where intensified cloud loading in response to North Indian SST warming depresses both the surface air temperature and solar radiation, and thus photochemical O3 production. Our findings indicate a robust linkage

  17. Response of the global surface ozone distribution to Northern Hemisphere sea surface temperature changes: implications for long-range transport

    Science.gov (United States)

    Yi, Kan; Liu, Junfeng; Ban-Weiss, George; Zhang, Jiachen; Tao, Wei; Cheng, Yanli; Tao, Shu

    2017-07-01

    The response of surface ozone (O3) concentrations to basin-scale warming and cooling of Northern Hemisphere oceans is investigated using the Community Earth System Model (CESM). Idealized, spatially uniform sea surface temperature (SST) anomalies of ±1 °C are individually superimposed onto the North Pacific, North Atlantic, and North Indian oceans. Our simulations suggest large seasonal and regional variability in surface O3 in response to SST anomalies, especially in the boreal summer. The responses of surface O3 associated with basin-scale SST warming and cooling have similar magnitude but are opposite in sign. Increasing the SST by 1 °C in one of the oceans generally decreases the surface O3 concentrations from 1 to 5 ppbv. With fixed emissions, SST increases in a specific ocean basin in the Northern Hemisphere tend to increase the summertime surface O3 concentrations over upwind regions, accompanied by a widespread reduction over downwind continents. We implement the integrated process rate (IPR) analysis in CESM and find that meteorological O3 transport in response to SST changes is the key process causing surface O3 perturbations in most cases. During the boreal summer, basin-scale SST warming facilitates the vertical transport of O3 to the surface over upwind regions while significantly reducing the vertical transport over downwind continents. This process, as confirmed by tagged CO-like tracers, indicates a considerable suppression of intercontinental O3 transport due to increased tropospheric stability at lower midlatitudes induced by SST changes. Conversely, the responses of chemical O3 production to regional SST warming can exert positive effects on surface O3 levels over highly polluted continents, except South Asia, where intensified cloud loading in response to North Indian SST warming depresses both the surface air temperature and solar radiation, and thus photochemical O3 production. Our findings indicate a robust linkage between basin-scale SST

  18. A New Concept to Transport a Droplet on Horizontal Hydrophilic/Hydrophobic Surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Myong, Hyon Kook [Kookmin Univ., Seoul (Korea, Republic of)

    2014-03-15

    A fluid transport technique is a key issue for the development of microfluidic systems. In this paper, a new concept for transporting a droplet without external power sources is proposed and verified numerically. The proposed device is a heterogeneous surface which has both hydrophilic and hydrophobic horizontal surfaces. The numerical simulation to demonstrate the new concept is conducted by an in-house solution code (PowerCFD) which employs an unstructured cell-centered method based on a conservative pressure-based finite-volume method with interface capturing method (CICSAM) in a volume of fluid (VOF) scheme for phase interface capturing. It is found that the proposed concept for droplet transport shows superior performance for droplet transport in microfluidic systems.

  19. Applications of asymmetric nanotextured parylene surface using its wetting and transport properties

    Science.gov (United States)

    Sekeroglu, Koray

    In this thesis, basic digital fluidics devices were introduced using polymeric nanorods (nano-PPX) inspired from nature. Natural inspiration ignited this research by observing butterfly wings, water strider legs, rye grass leaves, and their asymmetric functions. Nano-PPX rods, manufactured by an oblique angle polymerization (OAP) method, are asymmetrically aligned structures that have unidirectional wetting properties. Nano-PPX demonstrates similar functions to the directional textured surfaces of animals and plants in terms of wetting, adhesion, and transport. The water pin-release mechanism on the asymmetric nano-PPX surface with adhesion function provides a great transport property. How the asymmetry causes transport is discussed in terms of hysteresis and interface contact of water droplets. In this study, the transport property of nano-PPX rods is used to guide droplets as well as transporting cargo such as microgels. With the addition of tracks on the nano-PPX rods, the surfaces were transformed into basic digital fluidics devices. The track-assisted nano-PPX has been employed to applications (i.e. sorting, mixing, and carrying cargo particles). Thus, digital fluidics devices fabricated on nano-PPX surface is a promising pathway to assemble microgels in the field of bioengineering. The characterization of the nano textured surface was completed using methods such as Scanning Electron Microscopy, Atomic Force Microscopy, Contact Angle Goniometry, and Fourier Transform Infra-Red Spectroscopy. These methods helped to understand the physical and chemical properties of nano-PPX. Parameters such as advancing and receding contact angles, nanorod tilt angle, and critical drop volumes were utilized to investigate the anisotropic wetting properties of nano-PPX surface. This investigation explained the directional wetting behavior of the surface as well as approaching new design parameters for adjusting surface properties. The nanorod tilt angle was a key parameter

  20. Safety in intrahospital transportation: evaluation of respiratory and hemodynamic parameters. A prospective cohort study

    Directory of Open Access Journals (Sweden)

    Bruno Franco Mazza

    Full Text Available CONTEXT AND OBJECTIVE: Intrahospital transportation of mechanically ventilated patients is a high-risk situation. We aimed to determine whether transfers could be safely performed by using a transportation routine. DESIGN AND SETTING: Prospective cohort study with "before and after" evaluation. METHODS: Mechanically ventilated patients who needed transportation were included. Hemodynamic and respiratory parameters were measured before and after transportation. Statistical analysis consisted of variance analysis and paired Student's t test. Results were considered significant if P 5, FiO2 > 0.4 and vasoactive drug use comprised 42.4%, 24.3%, 21.6% and 33.0% of cases, respectively. Mean duration of transportation was 43.4 ± 18.9 minutes. Complications occurred in 32.4%. There was a significant increase in CO2 (before transportation, 29.6 ± 7.3 and after transportation, 34.9 ± 7.0; P = 0.000; a trend towards improved PO2/FiO2 ratio (before transportation, 318.0 ± 137.0 and after transportation, 356.8 ± 119.9; P = 0.053; increased heart rate (before transportation, 80.9 ± 18.7 and after transportation, 85.5 ± 17.6; P = 0.08; and no significant change in mean arterial blood pressure (P = 0.93. CONCLUSION: These results suggest that intrahospital transportation can be safely performed. Our low incidence of complications was possibly related to both the presence of a multidisciplinary transportation team and proper equipment.

  1. Effects of trans-Eurasian transport of air pollutants on surface ozone concentrations over Western China

    Science.gov (United States)

    Li, Xiaoyuan; Liu, Junfeng; Mauzerall, Denise L.; Emmons, Louisa K.; Walters, Stacy; Horowitz, Larry W.; Tao, Shu

    2014-11-01

    Due to a lack of industrialization in Western China, surface air there was, until recently, believed to be relatively unpolluted. However, recent measurements and modeling studies have found high levels of ozone (O3) there. Based on the state-of-the-science global chemical transport model MOZART-4, we identify the origin, pathway, and mechanism of trans-Eurasian transport of air pollutants to Western China in 2000. MOZART-4 generally simulates well the observed surface O3 over inland areas of China. Simulations find surface ozone concentrations over Western China on average to be about 10 ppbv higher than Eastern China. Using sensitivity studies, we find that anthropogenic emissions from all Eurasian regions except China contribute 10-15 ppbv surface O3 over Western China, superimposed upon a 35-40 ppbv natural background. Transport from European anthropogenic sources to Northwestern China results in 2-6 ppbv O3 enhancements in spring and summer. Indian anthropogenic sources strongly influence O3 over the Tibetan Plateau during the summer monsoon. Transport of O3 originating from emissions in the Middle East occasionally reach Western China and increase surface ozone there by about 1-4 ppbv. These influences are of similar magnitude as trans-Pacific and transatlantic transport of O3 and its precursors, indicating the significance of trans-Eurasian ozone transport in hemispheric transport of air pollution. Our study further indicates that mitigation of anthropogenic emissions from Europe, the Indian subcontinent, and the Middle East could benefit public health and agricultural productivity in Western China.

  2. Effects of trans-Eurasian transport of anthropogenic pollutants on surface ozone concentrations over China

    Science.gov (United States)

    Liu, J.; Li, X.; Mauzerall, D. L.; Emmons, L. K.; Horowitz, L. W.; Guo, Y.; Tao, S.

    2015-12-01

    Due to a lack of industrialization in Western China, surface air there was, until recently, believed to be relatively unpolluted. However, recent measurements and modeling studies have found high levels of ozone (O3) there. Based on the state-of-the-science global chemical transport model MOZART-4, we identify the origin, pathway, and mechanism of trans-Eurasian transport of air pollutants to Western China in 2000. MOZART-4 generally simulates well the observed surface O3 over inland areas of China. Simulations find surface ozone concentrations over Western China on average to be about 10 ppbv higher than Eastern China. Using sensitivity studies as well as a fully-tagged approach, we find that anthropogenic emissions from all Eurasian regions except China contribute 10-15 ppbv surface O3 over Western China, superimposed upon a 35-40 ppbv natural background. Transport from European anthropogenic sources to Northwestern China results in 2-6 ppbv O3 enhancements in spring and summer. Indian anthropogenic sources strongly influence O3 over the Tibetan Plateau during the summer monsoon. Transport of O3 originating from emissions in the Middle East occasionally reach Western China and increase surface ozone there by about 1-4 ppbv. These influences are of similar magnitude as trans-Pacific and transatlantic transport of O3 and its precursors, indicating the significance of trans-Eurasian ozone transport in hemispheric transport of air pollution. Our study further indicates that mitigation of anthropogenic emissions from Europe, the Indian subcontinent, and the Middle East could benefit public health and agricultural productivity in Western China.

  3. Post-closure safety assessment of near surface disposal facilities for disused sealed radioactive sources

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Seunghee; Kim, Juyoul, E-mail: gracemi@fnctech.com

    2017-03-15

    Highlights: • Post-closure safety assessment of near surface disposal facility for DSRS was performed. • Engineered vault and rock-cavern type were considered for normal and well scenario. • {sup 14}C, {sup 226}Ra, {sup 241}Am were primary nuclides contributing large portion of exposure dose. • Near surface disposal of DSRSs containing {sup 14}C, {sup 226}Ra and {sup 241}Am should be restricted. - Abstract: Great attention has been recently paid to the post-closure safety assessment of low- and intermediate-level radioactive waste (LILW) disposal facility for disused sealed radioactive sources (DSRSs) around the world. Although the amount of volume of DSRSs generated from industry, medicine and research and education organization was relatively small compared with radioactive wastes from commercial nuclear power plants, some DSRSs can pose a significant hazard to human health due to their high activities and long half-lives, if not appropriately managed and disposed. In this study, post-closure safety assessment was carried out for DSRSs generated from 1991 to 2014 in Korea in order to ensure long-term safety of near surface disposal facilities. Two kinds of disposal options were considered, i.e., engineered vault type disposal facility and rock-cavern type disposal facility. Rock-cavern type disposal facility has been under operation in Gyeongju city, republic of Korea since August 2015 and engineered vault type disposal facility will be constructed until December 2020 in the vicinity of rock-cavern disposal facility. Assessment endpoint was individual dose to the member of critical group, which was modeled by GoldSim, which has been widely used as probabilistic risk analysis software based on Monte Carlo simulation in the area of safety assessment of radioactive waste facilities. In normal groundwater scenario, the maximum exposure dose was extremely low, approximately 1 × 10{sup −7} mSv/yr, for both disposal options and satisfied the regulatory limit

  4. Light-Driven Transport of a Liquid Marble with and against Surface Flows.

    Science.gov (United States)

    Kavokine, Nikita; Anyfantakis, Manos; Morel, Mathieu; Rudiuk, Sergii; Bickel, Thomas; Baigl, Damien

    2016-09-01

    Liquid marbles, that is, liquid drops coated by a hydrophobic powder, do not wet any solid or liquid substrate, making their transport and manipulation both highly desirable and challenging. Herein, we describe the light-driven transport of floating liquid marbles and emphasize a surprising motion behavior. Liquid marbles are deposited on a water solution containing photosensitive surfactants. Irradiation of the solution generates photoreversible Marangoni flows that transport the liquid marbles toward UV light and away from blue light when the thickness of the liquid substrate is large enough (Marangoni regime). Below a critical thickness, the liquid marbles move in the opposite direction to that of the surface flow at a speed increasing with decreasing liquid thickness (anti-Marangoni). We demonstrate that the anti-Marangoni motion is driven by the free surface deformation, which propels the non-wetting marble against the surface flow. We call this behavior "slide effect".

  5. Surface proton transport of fully protonated poly(aspartic acid) thin films on quartz substrates

    Science.gov (United States)

    Nagao, Yuki; Kubo, Takahiro

    2014-12-01

    Thin film structure and the proton transport property of fully protonated poly(aspartic acid) (P-Asp100) have been investigated. An earlier study assessed partially protonated poly(aspartic acid), highly oriented thin film structure and enhancement of the internal proton transport. In this study of P-Asp100, IR p-polarized multiple-angle incidence resolution (P-MAIR) spectra were measured to investigate the thin film structure. The obtained thin films, with thicknesses of 120-670 nm, had no oriented structure. Relative humidity dependence of the resistance, proton conductivity, and normalized resistance were examined to ascertain the proton transport property of P-Asp100 thin films. The obtained data showed that the proton transport of P-Asp100 thin films might occur on the surface, not inside of the thin film. This phenomenon might be related with the proton transport of the biological system.

  6. Trend road safety measures : international course on transportation and road engineering in developing countries. Two-year postgraduate Diploma and M.Sc. programme.

    NARCIS (Netherlands)

    1991-01-01

    This course focuses mainly on traffic and transport in developing countries, and deals primarily with matters of infrastructure. Road safety and road safety problems are closely related to the construction and operation of the road network. (See also C 1341 - C1346).

  7. Preliminary safety evaluation of an aircraft impact on a near-surface radioactive waste repository

    Energy Technology Data Exchange (ETDEWEB)

    Lo Frano, R.; Forasassi, G.; Pugliese, G. [Department of Industrial and Civil Engineering (DICI), University of Pisa, Pisa (Italy)

    2013-07-01

    The aircraft impact accident has become very significant in the design of a nuclear facilities, particularly, after the tragic September 2001 event, that raised the public concern about the potential damaging effects that the impact of a large civilian airplane could bring in safety relevant structures. The aim of this study is therefore to preliminarily evaluate the global response and the structural effects induced by the impact of a military or commercial airplane (actually considered as a 'beyond design basis' event) into a near surface radioactive waste (RWs) disposal facility. The safety evaluation was carried out according to the International safety and design guidelines and in agreement with the stress tests requirements for the security track. To achieve the purpose, a lay out and a scheme of a possible near surface repository, like for example those of the El Cabril one, were taken into account. In order to preliminarily perform a reliable analysis of such a large-scale structure and to determine the structural effects induced by such a types of impulsive loads, a realistic, but still operable, numerical model with suitable materials characteristics was implemented by means of FEM codes. In the carried out structural analyses, the RWs repository was considered a 'robust' target, due to its thicker walls and main constitutive materials (steel and reinforced concrete). In addition to adequately represent the dynamic response of repository under crashing, relevant physical phenomena (i.e. penetration, spalling, etc.) were simulated and analysed. The preliminary assessment of the effects induced by the dynamic/impulsive loads allowed generally to verify the residual strength capability of the repository considered. The obtained preliminary results highlighted a remarkable potential to withstand the impact of military/large commercial aircraft, even in presence of ongoing concrete progressive failure (some penetration and spalling of the

  8. Continuous directional water transport on the peristome surface of Nepenthes alata

    Science.gov (United States)

    Chen, Huawei; Zhang, Pengfei; Zhang, Liwen; Liu, Hongliang; Jiang, Ying; Zhang, Deyuan; Han, Zhiwu; Jiang, Lei

    2016-04-01

    Numerous natural systems contain surfaces or threads that enable directional water transport. This behaviour is usually ascribed to hierarchical structural features at the microscale and nanoscale, with gradients in surface energy and gradients in Laplace pressure thought to be the main driving forces. Here we study the prey-trapping pitcher organs of the carnivorous plant Nepenthes alata. We find that continuous, directional water transport occurs on the surface of the ‘peristome’—the rim of the pitcher—because of its multiscale structure, which optimizes and enhances capillary rise in the transport direction, and prevents backflow by pinning in place any water front that is moving in the reverse direction. This results not only in unidirectional flow despite the absence of any surface-energy gradient, but also in a transport speed that is much higher than previously thought. We anticipate that the basic ‘design’ principles underlying this behaviour could be used to develop artificial fluid-transport systems with practical applications.

  9. Groundwater-Surface Water Interaction: A Case Study of Embankment Dam Safety Assessment in Sweden.

    Science.gov (United States)

    Ferdos, F.; Dargahi, B.

    2015-12-01

    Seepage, when excessive and unimpeded, can cause embankment dam failure. Such failures are often initiated by internal erosion and piping. Modelling these phenomena in embankment dams, accounting for the groundwater-surface water interactions, is crucial when performing dam safety assessments. The aim of this study was to evaluate the applicability of modelling seepage flows in multi-region dams using a finite element based multi-physics model. The model was applied to the Trängslet dam, the largest dam in Sweden. The objectives were to analyze the characteristics of both the flow and the surface-ground water interactions occurring in the dam, including: i) the saturated and unsaturated laminar flow regimes within the dam body, ii) the non-linear through-flow in the dam shoulders' coarse material, iii) the influence of the surface waves in the reservoir on the seepage flow by coupling the physics to a hydrodynamic interface, and iv) the influence of a conceptual "erosion tunnel" on the seepage flow and its interaction with the surface water flow by coupling the physics to a CFD interface. The focus of the study was on the influence of the transient water head boundary condition, surface waves and the internal erosion tunnel on the location of the phreatic line and the seepage flow rate. The simulated seepage flow of the dam in its original condition tallied with the monitoring measurements (40-70 l/s). The main feature found was the relatively high position of the phreatic line, which could compromise the stability of the dam. The combination of the seepage model with the reservoir hydrodynamics indicated a negligible influence of the surface waves on seepage flow. Results from the combination of the seepage model with fluid dynamics indicated that a conceptual "erosion tunnel" placed within the dam, even as high as in the unsaturated zone, significantly affects the phreatic line's position. This also causes the seepage flow to increase by several orders of

  10. Tunable Surface Hydrophobicity and Fluid Transport through Nanoporous Membranes

    Science.gov (United States)

    Ostrowski, Joseph H. J.

    There are more than three billion people across the globe that struggle to obtain clean drinkable water. One of the most promising avenues for generating potable water is through reverse osmosis and nanofiltration. Both solutions require a semipermeable membrane that prohibits passage of unwanted solute particles but allows passage of the solvent. Atomically thin two-dimensional membranes based on porous graphene show great promise as semipermeable materials, but modeling fluid flow on length scales between the microscopic (nanometer and smaller) and macroscopic (micron and larger) regimes presents formidable challenges. This thesis explores both equilibrium and nonequilibrium aspects of this problem and develops new methodology for simulating systems away from thermal equilibrium. First, we hypothesize that there is a wetting penalty for water as it tries to breach a sheet of graphene that should be naturally hydrophobic. By using equilibrium molecular dynamics simulations, we show that the hydrophobicity depends sensitively on the degree of electrical doping, offering an opportunity to tune the hydrophobic effect of graphene using small amounts of doping. The wetting contact angle, a measure of hydrophobicity, changes dramatically with the voltage applied to single layer graphene. We find that the sensitivity of the hydrophobic effect to voltage depends not on hydrogen bonding motifs at the interface between graphene and water, but instead on a phenomenon known as electrowetting. The theory of electrowetting predicts that the difference in surface tensions that defines the contact angle is quartic in the voltage, rather than quadratic, as it would be in bilayer graphene or in a two-dimensional metal. To explore the nonequilibrium aspects of fluid passage through atomically thin membranes, we developed a molecular dynamics methodology for simulating fluid flow at constant flux based on Gauss's principle of least constraint. This method develops microscopic

  11. Corresponding-states principle and its practice thermodynamic, transport and surface properties of fluids

    CERN Document Server

    Xiang, Hong Wei

    2005-01-01

    The corresponding-states principle helps the understanding and calculating of thermodynamic, transport, and surface properties of substances in various states, required by our modern lifestyle. The Corresponding-States Principle and its Practice: Thermodynamic, Transport and Surface Properties of Fluids describes the origins and applications of the principle from a universal point of view with comparisons to experimental data where possible. It uses the universal theory to explain present theories. Emphasis is on the properties of pure systems, and the corresponding-states theory can also be e

  12. A simple approach to fabricate the rose petal-like hierarchical surfaces for droplet transportation

    Science.gov (United States)

    Yuan, Chao; Huang, Mengyu; Yu, Xingjian; Ma, Yupu; Luo, Xiaobing

    2016-11-01

    Precise transportation of liquid microdroplets is a great challenge in the microfluidic field. A sticky superhydrophobic surface with a high static contact angle (CA) and a large contact angle hysteresis (CAH) is recognized as the favorable tool to deal with the challenging job. Some approaches have been proposed to fabricate such surface, such as mimicing the dual-scale hierarchical structure of a natural material, like rose petal. However, the available approaches normally require multiple processing steps or are carried out with great expense. In this study, we report a straightforward and inexpensive method for fabricating the sticky superhydrophobic surfaces. The fabrication relies on electroless galvanic deposition to coat the copper substrates with a textured layer of silver. The whole fabrication process is carried out under ambient conditions by using conventional laboratory materials and equipments, and generally take less than 15 min. Despite the simplicity of this fabrication method, the rose petal-like hierarchical structures and the corresponding sticky superhydrophobic wetting properties were well achieved on the artificial surfaces. For instance, the surface with a deposition time of 10 s exhibits the superhydrophobity with a CA of 151.5°, and the effective stickiness with a CAH of 56.5°. The prepared sticky superhydrophobic surfaces are finally shown in the application of droplet transportation, in which the surface acts as a mechanical hand to grasp and transport the water droplet.

  13. Probing the electronic transport on the reconstructed Au/Ge(001 surface

    Directory of Open Access Journals (Sweden)

    Franciszek Krok

    2014-09-01

    Full Text Available By using scanning tunnelling potentiometry we characterized the lateral variation of the electrochemical potential µec on the gold-induced Ge(001-c(8 × 2-Au surface reconstruction while a lateral current flows through the sample. On the reconstruction and across domain boundaries we find that µec shows a constant gradient as a function of the position between the contacts. In addition, nanoscale Au clusters on the surface do not show an electronic coupling to the gold-induced surface reconstruction. In combination with high resolution scanning electron microscopy and transmission electron microscopy, we conclude that an additional transport channel buried about 2 nm underneath the surface represents a major transport channel for electrons.

  14. Correlating Humidity-Dependent Ionically Conductive Surface Area with Transport Phenomena in Proton-Exchange Membranes

    Energy Technology Data Exchange (ETDEWEB)

    He, Qinggang; Kusoglu, Ahmet; Lucas, Ivan T.; Clark, Kyle; Weber, Adam Z.; Kostecki, Robert

    2011-08-01

    The objective of this effort was to correlate the local surface ionic conductance of a Nafion? 212 proton-exchange membrane with its bulk and interfacial transport properties as a function of water content. Both macroscopic and microscopic proton conductivities were investigated at different relative humidity levels, using electrochemical impedance spectroscopy and current-sensing atomic force microscopy (CSAFM). We were able to identify small ion-conducting domains that grew with humidity at the surface of the membrane. Numerical analysis of the surface ionic conductance images recorded at various relative humidity levels helped determine the fractional area of ion-conducting active sites. A simple square-root relationship between the fractional conducting area and observed interfacial mass-transport resistance was established. Furthermore, the relationship between the bulk ionic conductivity and surface ionic conductance pattern of the Nafion? membrane was examined.

  15. Formulation Effects and the Off-target Transport of Pyrethroid Insecticides from Urban Hard Surfaces

    OpenAIRE

    2010-01-01

    Controlled rainfall experiments utilizing drop forming rainfall simulators were conducted to study various factors contributing to off-target transport of off-the-shelf formulated pyrethroid insecticides from concrete surfaces. Factors evaluated included active ingredient, product formulation, time between application and rainfall (set time), and rainfall intensity. As much as 60% and as little as 0.8% of pyrethroid applied could be recovered in surface runoff depending primarily on product f...

  16. Safety Standard for Hydrogen and Hydrogen Systems: Guidelines for Hydrogen System Design, Materials Selection, Operations, Storage and Transportation. Revision

    Science.gov (United States)

    1997-01-01

    The NASA Safety Standard, which establishes a uniform process for hydrogen system design, materials selection, operation, storage, and transportation, is presented. The guidelines include suggestions for safely storing, handling, and using hydrogen in gaseous (GH2), liquid (LH2), or slush (SLH2) form whether used as a propellant or non-propellant. The handbook contains 9 chapters detailing properties and hazards, facility design, design of components, materials compatibility, detection, and transportation. Chapter 10 serves as a reference and the appendices contained therein include: assessment examples; scaling laws, explosions, blast effects, and fragmentation; codes, standards, and NASA directives; and relief devices along with a list of tables and figures, abbreviations, a glossary and an index for ease of use. The intent of the handbook is to provide enough information that it can be used alone, but at the same time, reference data sources that can provide much more detail if required.

  17. Patterned gradient surface for spontaneous droplet transportation and water collection: simulation and experiment

    Science.gov (United States)

    Tan, Xianhua; Zhu, Yiying; Shi, Tielin; Tang, Zirong; Liao, Guanglan

    2016-11-01

    We demonstrate spontaneous droplet transportation and water collection on wedge-shaped gradient surfaces consisting of alternating hydrophilic and hydrophobic regions. Droplets on the surfaces are modeled and simulated to analyze the Gibbs free energy and free energy gradient distributions. Big half-apex angle and great wettability difference result in considerable free energy gradient, corresponding to large driving force for spontaneous droplet transportation, thus causing the droplets to move towards the open end of the wedge-shaped hydrophilic regions, where the Gibbs free energy is low. Gradient surfaces are then fabricated and tested. Filmwise condensation begins on the hydrophilic regions, forming wedge-shaped tracks for water collection. Dropwise condensation occurs on the hydrophobic regions, where the droplet size distribution and departure diameters are controlled by the width of the regions. Condensate water from both the hydrophilic and hydrophobic regions are collected directionally to the open end of the wedge-shaped hydrophilic regions, agreeing with the simulations. Directional droplet transport and controllable departure diameters make the branched gradient surfaces more efficient than smooth surfaces for water collection, which proves that gradient surfaces are potential in water collection, microfluidic devices, anti-fogging and self-cleaning.

  18. Stakeholder Transportation Scorecard: Reviewing Nevada's Recommendations for Enhancing the Safety and Security of Nuclear Waste Shipments - 13518

    Energy Technology Data Exchange (ETDEWEB)

    Dilger, Fred C. [Black Mountain Research, Henderson, NV 81012 (United States); Ballard, James D. [Department of Sociology, California State University, Northridge, CA 91330 (United States); Halstead, Robert J. [State of Nevada Agency for Nuclear Projects, Carson City, NV 80906 (United States)

    2013-07-01

    As a primary stakeholder in the Yucca Mountain program, the state of Nevada has spent three decades examining and considering national policy regarding spent nuclear fuel and high-level radioactive waste transportation. During this time, Nevada has identified 10 issues it believes are critical to ensuring the safety and security of any spent nuclear fuel transportation program, and achieving public acceptance. These recommendations are: 1) Ship the oldest fuel first; 2) Ship mostly by rail; 3) Use dual-purpose (transportable storage) casks; 4) Use dedicated trains for rail shipments; 5) Implement a full-scale cask testing program; 6) Utilize a National Environmental Policy Act (NEPA) process for the selection of a new rail spur to the proposed repository site; 7) Implement the Western Interstate Energy Board (WIEB) 'straw man' process for route selection; 8) Implement Section 180C assistance to affected States, Tribes and localities through rulemaking; 9) Adopt safety and security regulatory enhancements proposed states; and 10) Address stakeholder concerns about terrorism and sabotage. This paper describes Nevada's proposals in detail and examines their current status. The paper describes the various forums and methods by which Nevada has presented its arguments and sought to influence national policy. As of 2012, most of Nevada's recommendations have been adopted in one form or another, although not yet implemented. If implemented in a future nuclear waste program, the State of Nevada believes these recommendations would form the basis for a successful national transportation plan for shipments to a geologic repository and/or centralized interim storage facility. (authors)

  19. Study on the safety during transport of radioactive materials. Pt. 4. Events during transport. Final report work package 6; Untersuchungen zur Sicherheit bei der Befoerderung radioaktiver Stoffe. T. 4. Ereignisse bei der Befoerderung. Abschlussbericht zum Arbeitspaket 6

    Energy Technology Data Exchange (ETDEWEB)

    Sentuc, Florence-Nathalie

    2014-09-15

    This report presents the results from a data collection and an evaluation of the safety significance of events in the transportation of radioactive material by all modes on public routes in Germany. Systems for reporting and evaluation of the safety significance of events encountered in the transport of radioactive material are a central element in monitoring and judging the adequacy and effectiveness of the transport regulations and their underlying safety philosophy, this allows for revision by experience feedback (lessons learned). The nationwide survey performed covering the period from the mid 1990s through 2013 identified and analysed a total of 670 transport events varying in type and severity. The vast majority of recorded transport events relate to minor deviations from the provisions of the transport regulations (e.g. improper markings and error in transport documents) or inappropriate practices and operational procedures resulting in material damage of packages and equipment such as handling incidents. Severe traffic accidents and fires represented only a small fraction (ca. 3 percent) of the recorded transport events. Four transport events were identified in the reporting period to have given rise to environmental radioactive releases. Three transport events have reportedly resulted in minor radiation exposures to the transport personnel; in one case an exposure in excess of the statutory annual dose limit for the public seems possible. Based on the EVTRAM scale, with seven significance levels, the broad majority of transport events has been classified as ''non-incidents'' (Level 0) and ''events without affecting the safety functions of the package'' (Level 1). On the INES scale most transport events would be classified as events with ''no safety significance'' (Below Scale/Level 0). The survey results show no serious deficiencies in the transport of radioactive material, supporting the

  20. Mass Transport in a Thin Layer of Bi-Viscous Mud Under Surface Waves

    Institute of Scientific and Technical Information of China (English)

    NG Chiu-on; FU Sau-chung; BAI Yu-chuan(白玉川)

    2002-01-01

    The mass transport in a thin layer of non-Newtonian bed mud under surface waves is examined with a two-fluidStokes boundary layer model. The mud is assumed to be a bi-viscous fluid, which tends to resist motion for small-appliedstresses, but flows readily when the yield stress is exceeded. Asymptotic expansions suitable for shallow fluid layers areapplied, and the second-order solutions for the mass transport induced by surface progressive waves are obtained numeri-cally. It is found that the stronger the non-Newtonian behavior of the mud, the more pronounced intermittency of theflow. Consequently, the mass transport velocity is diminished in magnitude, and can even become negative (i. e., oppo-site to wave propagation) for a certain range of yield stress.

  1. Ambipolar surface state transport in nonmetallic stoichiometric Bi2Se3 crystals

    Science.gov (United States)

    Syers, Paul; Paglione, Johnpierre

    2017-01-01

    Achieving true bulk insulating behavior in Bi2Se3 , the archetypal topological insulator with a simplistic one-band electronic structure and sizable band gap, has been prohibited by a well-known self-doping effect caused by selenium vacancies, whose extra electrons shift the chemical potential into the bulk conduction band. We report a synthesis method for achieving stoichiometric Bi2Se3 crystals that exhibit nonmetallic behavior in electrical transport down to low temperatures. Hall-effect measurements indicate the presence of both electron- and holelike carriers, with the latter identified with surface state conduction and the achievement of ambipolar transport in bulk Bi2Se3 crystals without gating techniques. With carrier mobilities surpassing the highest values yet reported for topological surface states in this material, the achievement of ambipolar transport via upward band bending is found to provide a key method to advancing the potential of this material for future study and applications.

  2. Mass transport in a thin layer of power-law mud under surface waves

    Science.gov (United States)

    Liu, Jie; Bai, Yuchuan; Xu, Dong

    2017-02-01

    The mass transport velocity in a two-layer system is studied theoretically. The wave motion is driven by a periodic pressure load on the free water surface, and mud in the lower layer is described by a power-law rheological model. Perturbation analysis is performed to the second order to find the mean Eulerian velocity. A numerical iteration method is employed to solve the non-linear governing equation at the leading order. The influence of rheological properties on fluid motion characteristics including the flow field, the surface displacement, the mass transport velocity, and the net discharge rates are investigated based on theoretical results. Theoretical analysis shows that under the action of interfacial shearing, a recirculation structure may appear near the interface in the upper water layer. A higher mass transport velocity at the interface does not necessarily mean a higher discharge rate for a pseudo-plastic fluid mud.

  3. Nonadiabaticity and single-electron transport driven by surface acoustic waves

    DEFF Research Database (Denmark)

    Flensberg, Karsten; Niu, Q.; Pustilnik, M.

    1999-01-01

    Single-electron transport driven by surface acoustic waves (SAW) through a narrow constriction, formed in a two-dimensional electron gas, is studied theoretically. Due to long-range Coulomb interaction, the tunneling coupling between the electron gas and the moving minimum of the SAW...

  4. Quantum transport and two-parameter scaling at the surface of a weak topological insulator.

    Science.gov (United States)

    Mong, Roger S K; Bardarson, Jens H; Moore, Joel E

    2012-02-17

    Weak topological insulators have an even number of Dirac cones in their surface spectrum and are thought to be unstable to disorder, which leads to an insulating surface. Here we argue that the presence of disorder alone will not localize the surface states; rather, the presence of a time-reversal symmetric mass term is required for localization. Through numerical simulations, we show that in the absence of the mass term the surface always flow to a stable metallic phase and the conductivity obeys a one-parameter scaling relation, just as in the case of a strong topological insulator surface. With the inclusion of the mass, the transport properties of the surface of a weak topological insulator follow a two-parameter scaling form.

  5. Solute transport predicts scaling of surface reaction rates in porous media: Applications to silicate weathering

    CERN Document Server

    Hunt, Allen G; Ghanbarian, Behzad

    2013-01-01

    We apply our theory of conservative solute transport, based on concepts from percolation theory, directly and without modification to reactive solute transport. This theory has previously been shown to predict the observed range of dispersivity values for conservative solute transport over ten orders of magnitude of length scale. We now show that the temporal dependence derived for the solute velocity accurately predicts the time-dependence for the weathering of silicate minerals over nine orders of magnitude of time scale, while its predicted length dependence agrees with data obtained for reaction rates over five orders of magnitude of length scale. In both cases, it is possible to unify lab and field results. Thus, net reaction rates appear to be limited by solute transport velocities. We suggest the possible relevance of our results to landscape evolution of the earth's terrestrial surface.

  6. Reliable transport through a microfabricated X-junction surface-electrode ion trap

    Science.gov (United States)

    Wright, Kenneth; Amini, Jason M.; Faircloth, Daniel L.; Volin, Curtis; Doret, S. Charles; Hayden, Harley; Pai, C.-S.; Landgren, David W.; Denison, Douglas; Killian, Tyler; Slusher, Richart E.; Harter, Alexa W.

    2013-03-01

    We report the design, fabrication and characterization of a microfabricated surface-electrode ion trap that supports controlled transport through the two-dimensional intersection of linear trapping zones arranged in a 90° cross. The trap is fabricated with very large scalable integration techniques which are compatible with scaling to a large quantum information processor. The shape of the radio-frequency electrodes is optimized with a genetic algorithm to reduce axial pseudopotential barriers and minimize ion heating during transport. Seventy-eight independent dc control electrodes enable fine control of the trapping potentials. We demonstrate reliable ion transport between junction legs and determine the rate of ion loss due to transport. Doppler-cooled ions survive more than 105 round-trip transits between junction legs without loss and more than 65 consecutive round trips without laser cooling.

  7. Heating and ion transport in a Y-junction surface-electrode trap

    CERN Document Server

    Shu, G; Volin, C; Buikema, A; Nichols, C S; Stick, D; Brown, Kenneth R

    2014-01-01

    We measure ion heating following transport throughout a Y-junction surface-electrode ion trap. By carefully selecting the trap voltage update rate during adiabatic transport along a trap arm, we observe minimal heating relative to the anomalous heating background. Transport through the junction results in an induced heating between 37 and 150 quanta in the axial direction per traverse. To reliably measure heating in this range, we compare the experimental sideband envelope, including up to fourth-order sidebands, to a theoretical model. The sideband envelope method allows us to cover the intermediate heating range inaccessible to the first-order sideband and Doppler recooling methods. We conclude that quantum information processing in this ion trap will likely require sympathetic cooling in order to support high fidelity gates after junction transport.

  8. Safety assessment of greenhouse hydroponic tomatoes irrigated with reclaimed and surface water.

    Science.gov (United States)

    Lopez-Galvez, Francisco; Allende, Ana; Pedrero-Salcedo, Francisco; Alarcon, Juan Jose; Gil, Maria Isabel

    2014-11-17

    The impact of reclaimed and surface water on the microbiological safety of hydroponic tomatoes was assessed. Greenhouse tomatoes were irrigated with reclaimed and surface water and grown on two hydroponic substrates (coconut fiber and rock wool). Water samples (n=208) were taken from irrigation water, with and without the addition of fertilizers and drainage water, and hydroponic tomatoes (n=72). Samples were analyzed for indicator microorganisms, generic Escherichia coli and Listeria spp., and pathogenic bacteria such as Salmonella spp. and Shiga-toxigenic E. coli (STEC), using multiplex real-time PCR (RT-PCR) after enrichment. The correlation between climatological parameters such as temperature and the levels of microorganisms in water samples was also determined. In irrigation water, generic E. coli counts were higher in reclaimed than in surface water whereas Listeria spp. numbers increased after adding the fertilizers in both water sources. In drainage water, no clear differences in E. coli and Listeria numbers were observed between reclaimed and surface water. No positive samples for STEC were found in irrigation water. Presumptive positives for Salmonella spp. were found in 7.7% of the water samples and 62.5% of these samples were reclaimed water. Salmonella-positive samples by RT-PCR could not be confirmed by conventional methods. Higher concentrations of E. coli were associated with Salmonella-presumptive positive samples. Climatological parameters, such as temperature, were not correlated with the E. coli and Listeria spp. counts. Tomato samples were negative for bacterial pathogens, while generic E. coli and Listeria spp. counts were below the detection limit. The prevalence of presumptive Salmonella spp. found in irrigation water (reclaimed and surface water) was high, which might present a risk of contamination. The absence of pathogens on greenhouse hydroponic tomatoes indicates that good agricultural practices (GAP) were in place, avoiding the

  9. Numerical and experimental investigation of surface vortex formation in coolant reservoirs of reactor safety systems

    Energy Technology Data Exchange (ETDEWEB)

    Pandazis, Peter [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, Garching (Germany); Babcsany, Boglarka [Budapest Univ. of Technology and Economics (Hungary). Inst. of Nuclear Techniques

    2016-11-15

    The reliable operation of the emergency coolant pumps and passive gravitational injection systems are an important safety issue during accident scenarios with coolant loss in pressurized water reactors. Because of the pressure drop and flow disturbances surface vortices develops at the pump intakes if the water level decreasing below a critical value. The induced swirling flow and gas entrainment lead to flow limitation and to pump failures and damages. The prediction of the critical submergence to avoid surface vortex building is difficult because it depends on many geometrical and fluid dynamical parameters. An alternative and new method has been developed for the investigation of surface vortices. The method based on the combination of CFD results with the analytical vortex model of Burgers and Rott. For further investigation the small scale experiments from the Institute of Nuclear Techniques of the Budapest University of Technology and Economics are used which were inspired from flow limitation problems during the draining of the bubble condenser trays at a VVER type nuclear power plants.

  10. 78 FR 28275 - Office of Commercial Space Transportation; Safety Approval Performance Criteria

    Science.gov (United States)

    2013-05-14

    ... reviewing a safety approval application per 14 CFR 414.19(a)(1). The FAA's evaluation included assessment of... consciousness) due to hypoxia. Understand the effects of prolonged oxygen use. Understand the difference between... about the performance criteria, you may contact Randal Maday, Licensing and Evaluation Division...

  11. Safety case for the disposal of spent nuclear fuel at Olkiluoto. Surface and near-surface hydrological modelling in the biosphere assessment BSA-2012

    Energy Technology Data Exchange (ETDEWEB)

    Karvonen, T. [WaterHope, Helsinki (Finland)

    2013-05-15

    The Finnish nuclear waste disposal company, Posiva Oy, is planning an underground repository for spent nuclear fuel to be constructed on the island of Olkiluoto on the south-west coast of Finland. This study is part of the biosphere assessment (BSA-2012) within the safety case for the repository. The surface hydrological modelling described in this report is aimed at providing link between radionuclide transport in the geosphere and in the biosphere systems. The SVAT-model and Olkiluoto site scale surface hydrological model were calibrated and validated in the present day conditions using the input data provided by the Olkiluoto Monitoring Programme (OMO). During the next 10 000 years the terrain and ecosystem development is to a large extent driven by the postglacial crustal uplift. UNTAMO is a GIS toolbox developed for simulating land-uplift driven or other changes in the biosphere. All the spatial and temporal input data (excluding meteorological data) needed in the surface hydrological modelling were provided by the UNTAMO toolbox. The specific outputs given by UNTAMO toolbox are time-dependent evolution of the biosphere objects. They are continuous and sufficiently homogeneous sub-areas of the modelled area that could potentially receive radionuclides released from the repository. Possible ecosystem types for biosphere objects are coast, lake, river, forest, cropland, pasture and wetland. The primary goal of this study was to compute vertical and horizontal water fluxes in the biosphere objects. These data will be used in the biosphere radionuclide transport calculations. The method adopted here is based on calculating average vertical and horizontal fluxes for biosphere objects from the results of the full 3D-model. It was not necessary to develop any simplified hydrological model for the biosphere objects. This report includes modelling results from for the Reference Case (present day climate) and Terr{sub M}axAgri Case (maximum extent of agricultural areas

  12. Validation of peracetic acid as a sporicide for sterilization of working surfaces in biological safety cabinets

    Directory of Open Access Journals (Sweden)

    Sandra Regina B.R. Sella

    2012-09-01

    Full Text Available Objectives: This study aimed to validate the use of peracetic acid as sporicide agent to decontaminate the workingsurface of a laminar flow biological safety cabinet (BSC, as an alternative to glutaraldehyde, including the selection ofthe disinfecting agent, the method of application, and the contact time.Materials and methods: The test organism was the spore-forming bacterium Bacillus atrophaeus ATCC 9372, which isa surrogate for an important infectious agent. Spore cultures were prepared from B. atrophaeus and used them to testthe sporicidal efficacy of peracetic acid on a BSC stainless steel surface. The performance of the sterilant was assessedby determining minimal inhibitory concentration (MIC and by microbial challenge in conditions that mimicked surfacecontamination. It was used 2.0% glutaraldehyde solution as the control.Results: The range of MICs was 0.6-1.1% for the control and 0.003-0.006% for the 0.2% peracetic acid solution. The 0.2%peracetic acid was an effective sterilant against B. atrophaeus spores (6-7 log spores, under defined conditions of useafter 40 min contact time, which was double that recommended on the product label.Conclusion: It was conclude that while the results of official methods can help to evaluate how products will perform,they are not usually reproducible in real-life user conditions and environments. Validation tests must be carried out toensure the efficacy and safety of surface decontamination procedures. J Microbiol Infect Dis 2012; 2(3: 93-99Key words: Peracetic acid, sporicidal activity, sterility, Bacillus atrophaeus spores, glutaraldehyde

  13. Microfour-point probe for studying electronic transport through surface states

    DEFF Research Database (Denmark)

    Petersen, Christian Leth; Grey, Francois; Shiraki, I.

    2000-01-01

    Microfour-point probes integrated on silicon chips have been fabricated with probe spacings in the range 4-60 mum. They provide a simple robust device for electrical transport measurements at surfaces, bridging the gap between conventional macroscopic four-point probes and scanning tunneling...... microscopy. Measurements on Si(111) surfaces in ultrahigh vacuum reveal that the Si(111)-root 3x root3-Ag structure induced by a monolayer of Ag atoms has a four-point resistance two orders of magnitude lower than that of the Si(111)-7x7 clean surface. We attribute this remarkable difference to direct...

  14. Quantum transport in the surface states of epitaxial Bi(111) thin films

    Science.gov (United States)

    Zhu, Kai; Wu, Lin; Gong, Xinxin; Xiao, Shunhao; Jin, Xiaofeng

    2016-09-01

    Although bulk Bi is a prototypical semimetal with a topologically trivial electronic band structure, we show by various quantum transport measurements that epitaxial Bi(111) thin films have unexpected and nontrivial properties. Not only the top and the bottom but also the side surfaces of epitaxial Bi(111) thin films are always robustly metallic while the interior has already become insulating. We identify the coupling between the top and the bottom surface states that drives the two originally independent surface conducting channels into a single connected one. The properties of Bi(111) thin films realized could lead to promising applications in spintronics.

  15. Rapid transport from the surface to wells in fractured rock: a unique infiltration tracer experiment.

    Science.gov (United States)

    Levison, Jana K; Novakowski, Kent S

    2012-04-01

    A unique infiltration tracer experiment was performed whereby a fluorescent dye was applied to the land surface in an agricultural field, near Perth, Ontario, Canada, to simulate the transport of solutes to two pumped monitoring wells drilled into the granitic gneiss aquifer. This experiment, interpreted using the discrete-fracture capability of the numerical model HydroGeoSphere, showed that solute transport from the surface through thin soil (less than 2m) to wells in fractured bedrock can be extremely rapid (on the order of hours). Also, it was demonstrated that maximum concentrations of contaminants originating from the ground surface will not necessarily be the highest in the shallow aquifer horizon. These are important considerations for both private and government-owned drinking water systems that draw water from shallow fractured bedrock aquifers. This research illustrates the extreme importance of protecting drinking water at the source.

  16. Transport of particles by surface waves: a modification of the classical bouncer model

    Energy Technology Data Exchange (ETDEWEB)

    Ragulskis, M [Department of Mathematical Research in Systems, Kaunas University of Technology, Studentu 50-222, 51638 Kaunas (Lithuania); Sanjuan, M A F [Nonlinear Dynamics and Chaos Group, Departamento de Fisica, Universidad Rey Juan Carlos, Tulipan s/n, 28933 Mostoles, Madrid (Spain)], E-mail: minvydas.ragulskis@ktu.lt, E-mail: miguel.sanjuan@urjc.es

    2008-08-15

    We consider a ball under the influence of gravity on a platform. A propagating surface wave travels on the surface of the platform, while the platform remains motionless. This is a modification of the classical bouncing ball problem and describes the transport of particles by surface waves. Phase and velocity maps cannot be expressed in an explicit form owing to implicit formulations, and no formal analytical analysis is possible. Numerical analysis shows that the transition to chaos is produced via a period doubling route, which is a common property for classical bouncers. The bouncing process can be sensitive to the initial conditions, which can build the ground for control techniques that can dramatically increase the effectiveness of particle transport in practical applications.

  17. The Effect of Surface Roughness on Fluid Configuration and Solute Transport in Unsaturated Porous Media

    Science.gov (United States)

    Kibbey, T. C.

    2013-12-01

    When describing the configuration of water in unsaturated media, a distinction is often made between water that is held by capillary forces between grains (capillary water), and water associated with adsorbed films on solid surfaces (film water). The objective of this work was to better understand the nature of the water associated with solid surfaces, with emphasis on understanding the configuration of water on rough natural surfaces. Stereoscopic SEM was used to determine elevation maps on a range of different natural solid surfaces. A computational technique was then developed to calculate the configuration of water on the surfaces as a function of capillary pressure. Calculations of fluid configurations show that, except at extremely high capillary pressures, fluid configuration is dominated by bridging of surface roughness features, even for extremely smooth surfaces. Results suggest that true adsorbed films are likely extremely rare in the environment except under near-dry, ultra-high capillary pressure conditions. This result has significant implications for understanding fate and transport within the unsaturated zone. Preliminary simulations exploring the impact on transport will be discussed.

  18. Updated model for radionuclide transport in the near-surface till at Forsmark - Implementation of decay chains and sensitivity analyses

    Energy Technology Data Exchange (ETDEWEB)

    Pique, Angels; Pekala, Marek; Molinero, Jorge; Duro, Lara; Trinchero, Paolo; Vries, Luis Manuel de [Amphos 21 Consulting S.L., Barcelona (Spain)

    2013-02-15

    The Forsmark area has been proposed for potential siting of a deep underground (geological) repository for radioactive waste in Sweden. Safety assessment of the repository requires radionuclide transport from the disposal depth to recipients at the surface to be studied quantitatively. The near-surface quaternary deposits at Forsmark are considered a pathway for potential discharge of radioactivity from the underground facility to the biosphere, thus radionuclide transport in this system has been extensively investigated over the last years. The most recent work of Pique and co-workers (reported in SKB report R-10-30) demonstrated that in case of release of radioactivity the near-surface sedimentary system at Forsmark would act as an important geochemical barrier, retarding the transport of reactive radionuclides through a combination of retention processes. In this report the conceptual model of radionuclide transport in the quaternary till at Forsmark has been updated, by considering recent revisions regarding the near-surface lithology. In addition, the impact of important conceptual assumptions made in the model has been evaluated through a series of deterministic and probabilistic (Monte Carlo) sensitivity calculations. The sensitivity study focused on the following effects: 1. Radioactive decay of {sup 135}Cs, {sup 59}Ni, {sup 230}Th and {sup 226}Ra and effects on their transport. 2. Variability in key geochemical parameters, such as the composition of the deep groundwater, availability of sorbing materials in the till, and mineral equilibria. 3. Variability in hydraulic parameters, such as the definition of hydraulic boundaries, and values of hydraulic conductivity, dispersivity and the deep groundwater inflow rate. The overarching conclusion from this study is that the current implementation of the model is robust (the model is largely insensitive to variations in the parameters within the studied ranges) and conservative (the Base Case calculations have a

  19. Electrostatic application of antimicrobial sprays to sanitize food handling and processing surfaces for enhanced food safety

    Energy Technology Data Exchange (ETDEWEB)

    Lyons, Shawn M; Harrison, Mark A [Food Science and Technology Department, University of Georgia, Athens, GA, 30602-2610 (United States); Law, S Edward, E-mail: edlaw@engr.uga.edu [Biological and Agricultural Engineering Department, Applied Electrostatics Laboratory www.ael.engr.uga.edu, University of Georgia, Athens, GA, 30602-4435 (United States)

    2011-06-23

    Human illnesses and deaths caused by foodborne pathogens (e.g., Salmonella enterica, Listeria monocytogenes, Escherichia coli O157:H7, etc.) are of increasing concern globally in maintaining safe food supplies. At various stages of the food production, processing and supply chain antimicrobial agents are required to sanitize contact surfaces. Additionally, during outbreaks of contagious pathogenic microorganisms (e.g., H1N1 influenza), public health requires timely decontamination of extensive surfaces within public schools, mass transit systems, etc. Prior publications verify effectiveness of air-assisted, induction-charged (AAIC) electrostatic spraying of various chemical and biological agents to protect on-farm production of food crops...typically doubling droplet deposition efficiency with concomitant increases in biological control efficacy. Within a biosafety facility this present work evaluated the AAIC electrostatic-spraying process for application of antimicrobial liquids onto various pathogen-inoculated food processing and handling surfaces as a food safety intervention strategy. Fluoroanalysis of AAIC electrostatic sprays (-7.2 mC/kg charge-to-mass ratio) showed significantly greater (p<0.05) mass of tracer active ingredient (A.I.) deposited onto target surfaces at various orientations as compared both to a similar uncharged spray nozzle (0 mC/kg) and to a conventional hydraulic-atomizing nozzle. Per unit mass of A.I. dispensed toward targets, for example, A.I. mass deposited by AAIC electrostatic sprays onto difficult to coat backsides was 6.1-times greater than for similar uncharged sprays and 29.0-times greater than for conventional hydraulic-nozzle sprays. Even at the 56% reduction in peracetic acid sanitizer A.I. dispensed by AAIC electrostatic spray applications, they achieved equal or greater CFU population reductions of Salmonella on most target orientations and materials as compared to uncharged sprays and conventional full-rate hydraulic

  20. Electrostatic application of antimicrobial sprays to sanitize food handling and processing surfaces for enhanced food safety

    Science.gov (United States)

    Lyons, Shawn M.; Harrison, Mark A.; Law, S. Edward

    2011-06-01

    Human illnesses and deaths caused by foodborne pathogens (e.g., Salmonella enterica, Listeria monocytogenes, Escherichia coli O157:H7, etc.) are of increasing concern globally in maintaining safe food supplies. At various stages of the food production, processing and supply chain antimicrobial agents are required to sanitize contact surfaces. Additionally, during outbreaks of contagious pathogenic microorganisms (e.g., H1N1 influenza), public health requires timely decontamination of extensive surfaces within public schools, mass transit systems, etc. Prior publications verify effectiveness of air-assisted, induction-charged (AAIC) electrostatic spraying of various chemical and biological agents to protect on-farm production of food crops...typically doubling droplet deposition efficiency with concomitant increases in biological control efficacy. Within a biosafety facility this present work evaluated the AAIC electrostatic-spraying process for application of antimicrobial liquids onto various pathogen-inoculated food processing and handling surfaces as a food safety intervention strategy. Fluoroanalysis of AAIC electrostatic sprays (-7.2 mC/kg charge-to-mass ratio) showed significantly greater (p<0.05) mass of tracer active ingredient (A.I.) deposited onto target surfaces at various orientations as compared both to a similar uncharged spray nozzle (0 mC/kg) and to a conventional hydraulic-atomizing nozzle. Per unit mass of A.I. dispensed toward targets, for example, A.I. mass deposited by AAIC electrostatic sprays onto difficult to coat backsides was 6.1-times greater than for similar uncharged sprays and 29.0-times greater than for conventional hydraulic-nozzle sprays. Even at the 56% reduction in peracetic acid sanitizer A.I. dispensed by AAIC electrostatic spray applications, they achieved equal or greater CFU population reductions of Salmonella on most target orientations and materials as compared to uncharged sprays and conventional full-rate hydraulic

  1. Surface Effect on Oil Transportation in Nanochannel: a Molecular Dynamics Study.

    Science.gov (United States)

    Zheng, Haixia; Du, Yonggang; Xue, Qingzhong; Zhu, Lei; Li, Xiaofang; Lu, Shuangfang; Jin, Yakang

    2017-12-01

    In this work, we investigate the dynamics mechanism of oil transportation in nanochannel using molecular dynamics simulations. It is demonstrated that the interaction between oil molecules and nanochannel has a great effect on the transportation properties of oil in nanochannel. Because of different interactions between oil molecules and channel, the center of mass (COM) displacement of oil in a 6-nm channel is over 30 times larger than that in a 2-nm channel, and the diffusion coefficient of oil molecules at the center of a 6-nm channel is almost two times more than that near the channel surface. Besides, it is found that polarity of oil molecules has the effect on impeding oil transportation, because the electrostatic interaction between polar oil molecules and channel is far larger than that between nonpolar oil molecules and channel. In addition, channel component is found to play an important role in oil transportation in nanochannel, for example, the COM displacement of oil in gold channel is very few due to great interaction between oil and gold substrate. It is also found that nano-sized roughness of channel surface greatly influences the speed and flow pattern of oil. Our findings would contribute to revealing the mechanism of oil transportation in nanochannels and therefore are very important for design of oil extraction in nanochannels.

  2. Influence of enterococcal surface protein (esp) on the transport of Enterococcus faecium within saturated quartz sands.

    Science.gov (United States)

    Johanson, Jennifer J; Feriancikova, Lucia; Xu, Shangping

    2012-02-07

    Enterococcus was selected by US EPA as a Gram-positive indicator microorganism for groundwater fecal contamination. It was recently reported that enterococcal surface protein (esp) was more prevalent in Enterococcus from human sources than in Enterococcus from nonhuman sources and esp could potentially be used as a source tracking tool for fecal contamination (Scott et al., 2005). In this research, we performed laboratory column transport experiments to investigate the transport of Enterococcus faecium within saturated quartz sands. Particularly, we used a wild type strain (E1162) and a mutant (E1162Δesp) to examine the influence of esp on the transport behavior of E. faecium. Our results showed that esp could significantly enhance the attachment of E. faecium cells onto the surface of silica sands and thus lower the mobility of E. faecium within sand packs. Cell surface properties (e.g., zeta potential) were determined and the extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory was applied to explain the effects of esp on the retention of E. faecium. Overall, our results suggested that E. faecium strains with esp could display lower mobility within saturated sand packs than E. faecium strains without esp. The disparity in the transport behavior of E. faecium with and without esp could limit the effectiveness of esp as a source tracking tool within the groundwater system.

  3. Applicability of the SCALE code system to MOX fuel transport systems for criticality safety analysis

    Energy Technology Data Exchange (ETDEWEB)

    Yamamoto, Toshihiro; Naito, Yoshitaka [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Hayashi, Toshiaki; Takasugi, Masahiro; Natsume, Toshihiro; Tsuda, Kazuaki

    1996-11-01

    In order to ascertain feasibilities of the SCALE code system for MOX fuel transport systems, criticality analyses were performed for MOX fuel (Pu enrichment; 3.0 wt.%) criticality experiments at JAERI`s TCA and for infinite fuel rod arrays as parameters of Pu enrichment and lattice pitch. The comparison with a combination of the continuous energy Monte Carlo code MCNP and JENDL-3.2 indicated that the SCALE code system with GAM-THERMOS 123-group library can produce feasible results. Though HANSEN-ROACH 16-group library gives poorer results for MOS fuel transport systems, the errors are conservative except for high enriched fuels. (author)

  4. SAFETY AND SECURITY IMPROVEMENT IN PUBLIC TRANSPORTATION BASED ON PUBLIC PERCEPTION IN DEVELOPING COUNTRIES

    Directory of Open Access Journals (Sweden)

    Tri Basuki JOEWONO

    2006-01-01

    Three aspects of an improvement agenda are proposed based on the perception data, namely technology, management, and institution. This agenda is clarified by a set of action plans incorporating the responsible parties and a time frame. The action plan is divided into three terms to define a clear goal for each step. The short-term action focuses on the hardware and on preparing further steps, whereas the medium-term action focuses on developing and improving the standard of safety and security. The long-term action focuses on advancing safety and security practices. The effectiveness of this agenda and action plan rests upon a set of assumptions, such as the degree of seriousness from the authoritative institution, fair distribution of information, the availability of reasonable resources, and coordinated and collaborative action from all parties involved to reach the objective.

  5. Electronic transport at semiconductor surfaces - from point-contact transistor to micro-four-point probes

    DEFF Research Database (Denmark)

    Hasegawa, S.; Grey, Francois

    2002-01-01

    show that this type of conduction is measurable using new types of experimental probes, such as the multi-tip scanning tunnelling microscope and the micro-four-point probe. The resulting electronic transport properties are intriguing, and suggest that semiconductor surfaces should be considered......The electrical properties of semiconductor surfaces have played a decisive role in one of the most important discoveries of the last century, transistors. In the 1940s, the concept of surface states-new electron energy levels characteristic of the surface atoms-was instrumental in the fabrication...... of the first point-contact transistors, and led to the successful fabrication of field-effect transistors. However, to this day, one property of semiconductor surface states remains poorly understood, both theoretically and experimentally. That is the conduction of electrons or holes directly through...

  6. Applying decision trial and evaluation laboratory as a decision tool for effective safety management system in aviation transport

    Directory of Open Access Journals (Sweden)

    Ifeanyichukwu Ebubechukwu Onyegiri

    2016-10-01

    Full Text Available In recent years, in the aviation industry, the weak engineering controls and lapses associated with safety management systems (SMSs are responsible for the seemingly unprecedented disasters. A previous study has confirmed the difficulties experienced by safety managers with SMSs and the need to direct research to this area of investigation for more insights and progress in the evaluation and maintenance of SMSs in the aviation industry. The purpose of this work is to examine the application of Decision Trial and Evaluation Laboratory (DEMATEL to the aviation industry in developing countries with illustration using the Nigerian aviation survey data for the validation of the method. The advantage of the procedure over other decision making methods is in its ability to apply feedback in its decision making. It also affords us the opportunity of breaking down the complex aviation SMS components and elements which are multi-variate in nature through the analysis of the contributions of the diverse system criteria from the perspective of cause and effects, which in turn yields easier and yet more effective aviation transportation accident pre-corrective actions. In this work, six revised components of an SMS were identified and DEMATEL was applied to obtain their direct and indirect impacts and influences on the overall SMS performance. Data collection was by the survey questionnaire, which served as the initial direct-relation matrix, coded in Matlab software for establishing the impact relation map (IRM. The IRM was then plotted in MS Excel spread-sheet software. From our results, safety structure and regulation has the highest impact level on an SMS with a corresponding positive relation level value. In conclusion, the results agree with those of previous researchers that used grey relational analysis. Thus, DEMATEL serves as a great tool and resource for the safety manager.

  7. Magnetically Controlled Electronic Transport Properties of a Ferromagnetic Junction on the Surface of a Topological Insulator

    Science.gov (United States)

    Liu, Zheng-Qin; Wang, Rui-Qiang; Deng, Ming-Xun; Hu, Liang-Bin

    2015-06-01

    We have investigated the transport properties of the Dirac fermions through a ferromagnetic barrier junction on the surface of a strong topological insulator. The current-voltage characteristic curve and the tunneling conductance are calculated theoretically. Two interesting transport features are predicted: observable negative differential conductances and linear conductances tunable from unit to nearly zero. These features can be magnetically manipulated simply by changing the spacial orientation of the magnetization. Our results may contribute to the development of high-speed switching and functional applications or electrically controlled magnetization switching. Supported by National Natural Science Foundation of China under Grant Nos. 11174088, 11175067, 11274124

  8. Measurements of wind friction speeds over lava surfaces and assessment of sediment transport

    Science.gov (United States)

    Greeley, Ronald; Iversen, James D.

    1987-01-01

    Wind velocity profiles were obtained over alluvial plains, lava flows, and a cinder cone in the Mojave Desert to determine the wind shear and the potential for particle transport. It was found that aerodynamic roughness for winds increases nearly a factor of 5 as flow crosses from the alluvium to the lava surface, resulting in wind shear that is 21 percent greater. Thus, wind erosion and sand flux may be substantially enhanced over the lava field. Moreover, wind flow turbulence is enhanced in the wake of the cinder cone, which also increases erosion and sediment transportation by the wind.

  9. A controlled field pilot for testing near surface CO2 detection techniques and transport models

    Science.gov (United States)

    Spangler, L.H.; Dobeck, L.M.; Repasky, K.; Nehrir, A.; Humphries, S.; Keith, C.; Shaw, J.; Rouse, J.; Cunningham, A.; Benson, S.; Oldenburg, C.M.; Lewicki, J.L.; Wells, A.; Diehl, R.; Strazisar, B.; Fessenden, J.; Rahn, Thomas; Amonette, J.; Barr, J.; Pickles, W.; Jacobson, J.; Silver, E.; Male, E.; Rauch, H.; Gullickson, K.; Trautz, R.; Kharaka, Y.; Birkholzer, J.; Wielopolski, L.

    2009-01-01

    A field facility has been developed to allow controlled studies of near surface CO2 transport and detection technologies. The key component of the facility is a shallow, slotted horizontal well divided into six zones. The scale and fluxes were designed to address large scale CO2 storage projects and desired retention rates for those projects. A wide variety of detection techniques were deployed by collaborators from 6 national labs, 2 universities, EPRI, and the USGS. Additionally, modeling of CO2 transport and concentrations in the saturated soil and in the vadose zone was conducted. An overview of these results will be presented. ?? 2009 Elsevier Ltd. All rights reserved.

  10. The Kuroshio Transport East of Taiwan and the Sea Surface Height Anomaly from the Interior Ocean

    Institute of Scientific and Technical Information of China (English)

    LIU Wei; LIU Qinyu; JIA Yinglai

    2004-01-01

    The relationship between the Kuroshio transport to the east of Taiwan and the SSHA(Sea Surface Height Anomaly)field is studied based on the World Ocean Circulation Experiment(WOCE)PCM-1 moored current meter array observation, the satellite altimeter data from the MSLA(Map of Sea Level Anomaly)products merged with the ERS and TOPEX/POSEIDON(T/P)data sets, and the WOCE satellite-tracked drifting buoy data. It is confirmed that the Kuroshio transport across PCM-1 array highly correlates with the SSHA upstream(22°-24°, 121.75°-124°E). The SSHA is not locally generated by the developed Kuroshio meandering but is from the interior ocean and is propagating westward or northwestward. During the period from October 1992 to January 1998, two events of the northwestward propagating negative SSHA occurred, during which the SSHA merged into the Kuroshio and caused the remarkable low transport events in contrast to the normal westward propagating negative SSHA. It is also shown that the lower Kuroshio transport event would be generated in different ways. The negative anomaly in the upstream of PCM-1 array can reduce the Kuroshio transport by either offshore or onshore Kuroshio meandering. The positive anomaly, which is strong enough to detour the Kuroshio, can cause an offshore meandering and a low transport event at the PCM-1 array.

  11. 78 FR 42998 - Hazardous Materials: Improving the Safety of Railroad Transportation of Hazardous Materials

    Science.gov (United States)

    2013-07-18

    ... published on April 11, 2000 (65 FR 19477). Robert C. Lauby, Deputy Associate Administrator for Regulatory..., Washington, DC 20590, (202) 493-6050, Kurt.Eichenlaub@dot.gov ; or Mr. Karl Alexy, Staff Director, Hazardous... Karl.Alexy@dot.gov . SUPPLEMENTARY INFORMATION: The Secretary of Transportation (Secretary)...

  12. Intersection planning in Safer Transportation Network Planning : safety principles, planning framework, and library information.

    NARCIS (Netherlands)

    Hummel, T.

    2001-01-01

    This report is one in a series of publications, used in the development of the network planning tool ‘Safer Transportation Network Planning’ (Safer-TNP). The publications were used to guide the development of planning structures, diagnostic tools, planning recommendations, and research information i

  13. Route management in Safer Transportation Network Planning : safety principles, planning framework, and library information.

    NARCIS (Netherlands)

    Hummel, T.

    2001-01-01

    This report is one in a series of publications, used in the development of the network planning tool ‘Safer Transportation Network Planning’ (Safer-TNP). The publications were used to guide the development of planning structures, diagnostic tools, planning recommendations, and research information

  14. Access management in Safer Transportation Network Planning : safety principles, planning framework, and library information.

    NARCIS (Netherlands)

    Hummel, T.

    2001-01-01

    This report is one in a series of publications, used in the development of the network planning tool ‘Safer Transportation Network Planning’ (Safer-TNP). The publications were used to guide the development of planning structures, diagnostic tools, planning recommendations, and research information

  15. Qatar's School Transportation System: Supporting Safety, Efficiency, and Service Quality. Monograph

    Science.gov (United States)

    Henry, Keith; Younossi, Obaid; Al-Dafa, Maryah; Culbertson, Shelly; Mattock, Michael G.; Light, Thomas; Rohr, Charlene

    2012-01-01

    In consideration of the many challenges associated with Qatar's continued growth and demographic changes, the government of Qatar is interested in updating its school transportation system (STS). This volume assesses the perspectives of parents and school administrators on Qatar's STS, identifies a vision and goals for the STS, reviews…

  16. Predicting uncertainty in sediment transport and landscape evolution - the influence of initial surface conditions

    Science.gov (United States)

    Hancock, G. R.; Coulthard, T. J.; Lowry, J. B. C.

    2016-05-01

    Numerical landscape evolution models were initially developed to examine natural catchment hydrology and geomorphology and have become a common tool to examine geomorphic behaviour over a range of time and space scales. These models all use a digital elevation model (DEM) as a representation of the landscape surface and a significant issue is the quality and resolution of this surface. Here we focus on how subtle perturbations or roughness on the DEM surface can produce alternative model results. This study is carried out by randomly varying the elevations of the DEM surface and examining the effect on sediment transport rates and geomorphology for a proposed rehabilitation design for a post-mining landscape using multiple landscape realisations with increasing magnitudes of random changes. We show that an increasing magnitude of random surface variability does not appear to have any significant effect on sediment transport over millennial time scales. However, the random surface variability greatly changes the temporal pattern or delivery of sediment output. A significant finding is that all simulations at the end of the 10,000 year modelled period are geomorphologically similar and present a geomorphological equifinality. However, the individual patterns of erosion and deposition were different for repeat simulations with a different sequence of random perturbations. The alternative positions of random perturbations strongly influence local patterns of hillslope erosion and evolution together with the pattern and behaviour of deposition. The findings demonstrate the complex feedbacks that occur even within a simple modelled system.

  17. Enhanced Hydrogen Transport over Palladium Ultrathin Films through Surface Nanostructure Engineering.

    Science.gov (United States)

    Abate, Salvatore; Giorgianni, Gianfranco; Gentiluomo, Serena; Centi, Gabriele; Perathoner, Siglinda

    2015-11-01

    Palladium ultrathin films (around 2 μm) with different surface nanostructures are characterized by TEM, SEM, AFM, and temperature programmed reduction (TPR), and evaluated in terms of H2 permeability and H2-N2 separation. A change in the characteristics of Pd seeds by controlled oxidation-reduction treatments produces films with the same thickness, but different surface and bulk nanostructure. In particular, the films have finer and more homogeneous Pd grains, which results in lower surface roughness. Although all samples show high permeo-selectivity to H2 , the samples with finer grains exhibit enhanced permeance and lower activation energy for H2 transport. The analysis of the data suggests that grain boundaries between the Pd grains at the surface favor H2 transfer from surface to subsurface. Thus, the surface nanostructure plays a relevant role in enhancing the transport of H2 over the Pd ultrathin film, which is an important aspect to develop improved membranes that function at low temperatures and toward new integrated process architectures in H2 and syngas production with enhanced sustainability.

  18. Application of the yeast-surface-display system for orally administered salmon calcitonin and safety assessment.

    Science.gov (United States)

    Sun, Ping-Nan; Zhang, Xue-Cheng; Chen, Yun-Song; Zang, Xiao-Nan

    2010-01-01

    High manufacturing costs and oral delivery are the constraints in clinical application of calcitonin. We selected surface-displayed Saccharomyces cerevisiae as a low-cost and safe carrier for oral delivery of salmon calcitonin (sCT). The sCT DNA fragment, optimized according to the codon preference of S. cerevisiae, was synthesized and cloned into the plasmid M-pYD1 to yield recombinant yAGA2-sCT, which was induced to express sCT by galactose for 0, 12, and 24 h. sCT expression was detected on the cell surface by indirect immunofluorescence and peaked at 12 h. About 65% recombinants expressed sCT on flow cytometry. The in vivo and in vitro activity of recombinant sCT was determined by detecting bioactivity of antiosteoclastic absorption on bone wafers and orally administering yAGA2-sCT to Wistar rats, respectively. For safety assessment of yAGA2-sCT, we observed abnormalities, morbidity, and mortality and determined body weight, serum chemistry parameters, hematological parameters, and organ weight. In vitro bioactivity of the recombinant sCT was similar to that of commercial sCT, Miacalcic; oral administration of 5 g/kg yAGA2-sCT induced a long-term hypocalcemic effect in Wistar rats and no adverse effects. This study demonstrates that yAGA2-sCT anchoring sCT protein on a S. cerevisiae surface has potential for low-cost and safe oral delivery of sCT.

  19. Thermally driven transverse transports and magnetic dynamics on a topological surface capped with a ferromagnet strip

    Science.gov (United States)

    Deng, Ming-Xun; Zhong, Ming; Zheng, Shi-Han; Qiu, Jian-Ming; Yang, Mou; Wang, Rui-Qiang

    2016-02-01

    We theoretically study thermally driven transport of the Dirac fermions on the surface of a topological insulator capped with a ferromagnet strip. The generation and manipulation of anomalous Hall and Nernst effects are analyzed, in which the in-plane magnetization of the ferromagnet film is found to take a decisive role. This scenario is distinct from that modulated by Berry phase where the in-plane magnetization is independent. We further discuss the thermal spin-transfer torque as a backaction of the thermoelectric transports on the magnetization and calculate the dynamics of the anomalous Hall and Nernst effects self-consistently. It is found that the magnitude of the long-time steady Hall and Nernst conductance is determined by competition between the magnetic anisotropy and current-induced effective anisotropy. These results open up a possibility of magnetically controlling the transverse thermoelectric transports or thermally manipulating the magnet switching.

  20. Reliable transport through a microfabricated X-junction surface-electrode ion trap

    CERN Document Server

    Wright, Kenneth; Faircloth, Daniel L; Volin, Curtis; Doret, S Charles; Hayden, Harley; Pai, C-S; Landgren, David W; Denison, Douglas; Killian, Tyler; Slusher, Richart E; Harter, Alexa W

    2012-01-01

    We report the design, fabrication, and characterization of a microfabricated surface-electrode ion trap that supports controlled transport through the two-dimensional intersection of linear trapping zones arranged in a ninety-degree cross. The trap is fabricated with very-large-scalable-integration (VLSI) techniques which are compatible with scaling to a larger quantum information processor. The shape of the radio-frequency (RF) electrodes is optimized with a genetic algorithm to minimize axial pseudopotential barriers and to minimize ion heating during transport. Seventy-eight independent DC control electrodes enable fine control of the trapping potentials. We demonstrate reliable ion transport between junction legs, trapping of ion chains with nearly-equal spacing in one of the trap's linear sections, and merging and splitting ions from these chains. Doppler-cooled ions survive more than 10^5 round-trip transits between junction legs without loss and more than sixty-five consecutive round trips without lase...

  1. Photoluminescence Imaging of Polyfluorene Surface Structures on Semiconducting Carbon Nanotubes: Implications for Thin Film Exciton Transport.

    Science.gov (United States)

    Hartmann, Nicolai F; Pramanik, Rajib; Dowgiallo, Anne-Marie; Ihly, Rachelle; Blackburn, Jeffrey L; Doorn, Stephen K

    2016-12-27

    Single-walled carbon nanotubes (SWCNTs) have potential to act as light-harvesting elements in thin film photovoltaic devices, but performance is in part limited by the efficiency of exciton diffusion processes within the films. Factors contributing to exciton transport can include film morphology encompassing nanotube orientation, connectivity, and interaction geometry. Such factors are often defined by nanotube surface structures that are not yet well understood. Here, we present the results of a combined pump-probe and photoluminescence imaging study of polyfluorene (PFO)-wrapped (6,5) and (7,5) SWCNTs that provide additional insight into the role played by polymer structures in defining exciton transport. Pump-probe measurements suggest exciton transport occurs over larger length scales in films composed of PFO-wrapped (7,5) SWCNTs, compared to those prepared from PFO-bpy-wrapped (6,5) SWCNTs. To explore the role the difference in polymer structure may play as a possible origin of differing transport behaviors, we performed a photoluminescence imaging study of individual polymer-wrapped (6,5) and (7,5) SWCNTs. The PFO-bpy-wrapped (6,5) SWCNTs showed more uniform intensity distributions along their lengths, in contrast to the PFO-wrapped (7,5) SWCNTs, which showed irregular, discontinuous intensity distributions. These differences likely originate from differences in surface coverage and suggest the PFO wrapping on (7,5) nanotubes produces a more open surface structure than is available with the PFO-bpy wrapping of (6,5) nanotubes. The open structure likely leads to improved intertube coupling that enhances exciton transport within the (7,5) films, consistent with the results of our pump-probe measurements.

  2. Photoluminescence Imaging of Polyfluorene Surface Structures on Semiconducting Carbon Nanotubes: Implications for Thin Film Exciton Transport

    Energy Technology Data Exchange (ETDEWEB)

    Hartmann, Nicolai F.; Pramanik, Rajib; Dowgiallo, Anne-Marie; Ihly, Rachelle; Blackburn, Jeffrey L.; Doorn, Stephen K.

    2016-12-27

    Single-walled carbon nanotubes (SWCNTs) have potential to act as light-harvesting elements in thin film photovoltaic devices, but performance is in part limited by the efficiency of exciton diffusion processes within the films. Factors contributing to exciton transport can include film morphology encompassing nanotube orientation, connectivity, and interaction geometry. Such factors are often defined by nanotube surface structures that are not yet well understood. Here, we present the results of a combined pump-probe and photoluminescence imaging study of polyfluorene (PFO)-wrapped (6,5) and (7,5) SWCNTs that provide additional insight into the role played by polymer structures in defining exciton transport. Pump-probe measurements suggest exciton transport occurs over larger length scales in films composed of PFO-wrapped (7,5) SWCNTs, compared to those prepared from PFO-bpy-wrapped (6,5) SWCNTs. To explore the role the difference in polymer structure may play as a possible origin of differing transport behaviors, we performed a photoluminescence imaging study of individual polymer-wrapped (6,5) and (7,5) SWCNTs. The PFO-bpy-wrapped (6,5) SWCNTs showed more uniform intensity distributions along their lengths, in contrast to the PFO-wrapped (7,5) SWCNTs, which showed irregular, discontinuous intensity distributions. These differences likely originate from differences in surface coverage and suggest the PFO wrapping on (7,5) nanotubes produces a more open surface structure than is available with the PFO-bpy wrapping of (6,5) nanotubes. The open structure likely leads to improved intertube coupling that enhances exciton transport within the (7,5) films, consistent with the results of our pump-probe measurements.

  3. Tuning thermal transport in ultrathin silicon membranes by surface nanoscale engineering.

    Science.gov (United States)

    Neogi, Sanghamitra; Reparaz, J Sebastian; Pereira, Luiz Felipe C; Graczykowski, Bartlomiej; Wagner, Markus R; Sledzinska, Marianna; Shchepetov, Andrey; Prunnila, Mika; Ahopelto, Jouni; Sotomayor-Torres, Clivia M; Donadio, Davide

    2015-04-28

    A detailed understanding of the connections of fabrication and processing to structural and thermal properties of low-dimensional nanostructures is essential to design materials and devices for phononics, nanoscale thermal management, and thermoelectric applications. Silicon provides an ideal platform to study the relations between structure and heat transport since its thermal conductivity can be tuned over 2 orders of magnitude by nanostructuring. Combining realistic atomistic modeling and experiments, we unravel the origin of the thermal conductivity reduction in ultrathin suspended silicon membranes, down to a thickness of 4 nm. Heat transport is mostly controlled by surface scattering: rough layers of native oxide at surfaces limit the mean free path of thermal phonons below 100 nm. Removing the oxide layers by chemical processing allows us to tune the thermal conductivity over 1 order of magnitude. Our results guide materials design for future phononic applications, setting the length scale at which nanostructuring affects thermal phonons most effectively.

  4. New efficient optimal mass transport approach for single freeform surface design

    CERN Document Server

    Bösel, Christoph

    2015-01-01

    We present a new optimal mass transport approach for the design of a continuous single freeform surface for collimated beams. By applying the law of reflection/refraction and the well-known integrability condition, it is shown that the design process in a small angle approximation can be decoupled into the calculation of a raymapping by optimal mass transport methods and the subsequent construction of the freeform surface by a steady linear advection equation. It is shown that the solution of this linear advection equation can be obtained by a decomposition into two dimensional subproblems and solving these by standard integrals. The efficiency of the method is demonstrated by applying it to two challenging design examples.

  5. Taking advantage of reduced droplet-surface interaction to optimize transport of bioanalytes in digital microfluidics.

    Science.gov (United States)

    Freire, Sergio L S; Thorne, Nathaniel; Wutkowski, Michael; Dao, Selina

    2014-11-10

    Digital microfluidics (DMF), a technique for manipulation of droplets, is a promising alternative for the development of "lab-on-a-chip" platforms. Often, droplet motion relies on the wetting of a surface, directly associated with the application of an electric field; surface interactions, however, make motion dependent on droplet contents, limiting the breadth of applications of the technique. Some alternatives have been presented to minimize this dependence. However, they rely on the addition of extra chemical species to the droplet or its surroundings, which could potentially interact with droplet moieties. Addressing this challenge, our group recently developed Field-DW devices to allow the transport of cells and proteins in DMF, without extra additives. Here, the protocol for device fabrication and operation is provided, including the electronic interface for motion control. We also continue the studies with the devices, showing that multicellular, relatively large, model organisms can also be transported, arguably unaffected by the electric fields required for device operation.

  6. Anisotropic surface hole-transport property of triphenylamine-derivative single crystal prepared by solution method

    Science.gov (United States)

    Umeda, Minoru; Katagiri, Mitsuhiko; Shironita, Sayoko; Nagayama, Norio

    2016-12-01

    This paper reports the anisotropic hole transport at the triphenylamine-derivative single crystal surface prepared by a solution method. Triphenylamine derivatives are commonly used in a hole-transport material for organic photoconductors of laser-beam printers, in which the materials are used as an amorphous form. For developing organic photovoltaics using the photoconductor's technology, preparation of a single crystal seems to be a specific way by realizing the high mobility of an organic semiconductor. In this study, a single crystal of 4-(2,2-diphenylethenyl)-N,N-bis(4-methylphenyl)-benzenamine (TPA) was prepared and its anisotropic hole-transport property measured. First, the hole-transport property of the TPA was investigated based on its chemical structure and electrochemical redox characteristics. Next, a large-scale single crystal formation at a high rate was developed by employing a solution method based on its solubility and supersolubility curves. The grown TPA was found to be a single crystal based on the polarization micrograph observation and crystallographic analysis. For the TPA single crystal, an anisotropic surface conduction was found, which was well explained by its molecular stack structure. The measured current in the long-axis direction is one order of magnitude greater than that of amorphous TPA.

  7. Surface plasmon enhanced quantum transport in a hybrid metal nanoparticle array

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Lin; Nan, Yali; Xu, Shang; Zhang, Sishi; Han, Min, E-mail: sjhanmin@nju.edu.cn

    2014-07-18

    Hybrid Pd–Ag nanoparticle arrays composed of randomly distributed Pd nanoparticles in dense packing and a small number of dispersed Ag nanoparticles were fabricated with controlled coverage. Photo-enhanced conductance was observed in the nanoparticle arrays. Largest enhancement, which can be higher than 20 folds, was obtained with 450 nm light illumination. This wavelength was found to correlate with the surface plasmon resonance of the Ag nanoparticles. Electron transport measurements showed there were significant Coulomb blockade in the nanoparticle arrays and the blockade could be overcome with the surface plasmon enhanced local field of Ag nanoparticles induced by light illumination. - Highlights: • We study photo-enhanced electron conductance of a hybrid Pd–Ag nanoparticle array. • The light-induced conductance enhancement is as high as 20 folds at 10 K. • The enhancement is correlate with the surface plasmon resonance of Ag nanoparticles. • Coulomb blockades is overcome with the surface plasmon enhanced local field.

  8. Density wave like transport anomalies in surface doped Na2IrO3

    Directory of Open Access Journals (Sweden)

    Kavita Mehlawat

    2017-05-01

    Full Text Available We report that the surface conductivity of Na2IrO3 crystal is extremely tunable by high energy Ar plasma etching and can be tuned from insulating to metallic with increasing etching time. Temperature dependent electrical transport for the metallic samples show signatures of first order phase transitions which are consistent with charge or spin density wave like phase transitions predicted recently. Additionally, grazing-incidence small-angle x-ray scattering (GISAXS reveal that the room temperature surface structure of Na2IrO3 does not change after plasma etching.

  9. Surface and transport properties of Cu-Sn-Ti liquid alloys

    Institute of Scientific and Technical Information of China (English)

    R. Novakovic; E. Ricci; S. Amore; T. Lanata

    2006-01-01

    The lack of experimental data and / or limited experimental information concerning both surface and transport properties of liquid alloys often require the prediction of these quantities. An attempt has been made to link the thermophysical properties of a ternary Cu-Sn-Ti system and its binary Cu-Sn, Cu-Ti and Sn-Ti subsystems with the bulk through the study of the concentration dependence of various thermodynamic, structural, surface and dynamic properties in the frame of the statistical mechanical theory in conjunction with the quasi-lattce theory (QLT). This formalism provides valuable qualitative insight into mixing processes that occur in molten alloys.

  10. Stochastic model for photoinduced surface relief grating formation through molecular transport in polymer films.

    Energy Technology Data Exchange (ETDEWEB)

    Juan, M.; Plain, J.; Bachelot, R.; Royer, P.; Gray, S. K.; Wiederrecht, G. P.; Univ. de Technologie de Troyes

    2008-09-01

    We use a stochastic model to study photoinduced surface relief grating (SRG) formation due to molecular transport in azobenzene polymer films. The model is shown to reproduce the essential experimental features of SRG formation. In particular, it predicts SRG formation under both p and s polarizations, and the double peaked topographies that can occur at early times of the process. The evolving molecular positions and orientations during exposure are also followed, providing a useful mechanistic picture of SRG dynamics.

  11. Transportation-Driven Mars Surface Operations Supporting an Evolvable Mars Campaign

    Science.gov (United States)

    Toups, Larry; Brown, Kendall; Hoffman, Stephen J.

    2015-01-01

    This paper describes the results of a study evaluating options for supporting a series of human missions to a single Mars surface destination. In this scenario the infrastructure emplaced during previous visits to this site is leveraged in following missions. The goal of this single site approach to Mars surface infrastructure is to enable "Steady State" operations by at least 4 crew for up to 500 sols at this site. These characteristics, along with the transportation system used to deliver crew and equipment to and from Mars, are collectively known as the Evolvable Mars Campaign (EMC). Information in this paper is presented in the sequence in which it was accomplished. First, a logical buildup sequence of surface infrastructure was developed to achieve the desired "Steady State" operations on the Mars surface. This was based on a concept of operations that met objectives of the EMC. Second, infrastructure capabilities were identified to carry out this concept of operations. Third, systems (in the form of conceptual elements) were identified to provide these capabilities. This included top-level mass, power and volume estimates for these elements. Fourth, the results were then used in analyses to evaluate three options (18t, 27t, and 40t landed mass) of Mars Lander delivery capability to the surface. Finally, Mars arrival mass estimates were generated based upon the entry, descent, and landing requirements for inclusion in separate assessments of in-space transportation capabilities for the EMC.

  12. Peer review of the National Transportation Safety Board structural analysis of the I-35W bridge collapse.

    Energy Technology Data Exchange (ETDEWEB)

    Gwinn, Kenneth West; Redmond, James Michael; Wellman, Gerald William

    2008-10-01

    The Engineering Sciences Center at Sandia National Laboratories provided an independent peer review of the structural analysis supporting the National Transportation Safety Board investigation of the August 1, 2007 collapse of the I-35W Bridge in Minneapolis. The purpose of the review was to provide an impartial critique of the analysis approach, assumptions, solution techniques, and conclusions. Subsequent to reviewing numerous supporting documents, a SNL team of staff and management visited NTSB to participate in analysis briefings, discussions with investigators, and examination of critical elements of the bridge wreckage. This report summarizes the opinion of the review team that the NTSB analysis effort was appropriate and provides compelling supporting evidence for the NTSB probable cause conclusion.

  13. Development of Information Support of the Automated System for Monitoring the State of the Gas Transportation System’s Industrial Safety

    Directory of Open Access Journals (Sweden)

    Ruslan Skrynkovskyy

    2017-08-01

    Full Text Available The purpose of the article is to developing the information security of the automated system for monitoring the state of industrial safety of the gas transportation system within the framework of the safety management system, which will enable timely and objective detection of adverse accident hazards (hazardous events and taking the necessary specific measures to eliminate them and operate the gas transport system safely. It is proved that the basis of the information provision of the automated system for monitoring the state of the industrial safety of the gas transmission system is a methodology that includes the following basic procedures: identifying hazards; qualitative and quantitative assessment of emergencies; establishing of unacceptable (unallowable risks and their introduction to the information base (register of unacceptable risks of objects of the gas transportation system; comprehensive assessment and certification of the state of industrial safety of objects of the gas transportation system; identification of effective, productive (efficient risk management measures. The prospect of further research in this area is the development and implementation of an automated system for monitoring the state of industrial safety of the objects of the gas transmission system based on the results of the research (of the submitted information provision.

  14. River stage influences on uranium transport in a hydrologically dynamic groundwater-surface water transition zone: U TRANSPORT IN A GROUNDWATER-SURFACE WATER TRANSITION ZONE

    Energy Technology Data Exchange (ETDEWEB)

    Zachara, John M. [Pacific Northwest National Laboratory, Richland Washington USA; Chen, Xingyuan [Pacific Northwest National Laboratory, Richland Washington USA; Murray, Chris [Pacific Northwest National Laboratory, Richland Washington USA; Hammond, Glenn [Sandia National Laboratories, Albuquerque New Mexico USA

    2016-03-01

    A tightly spaced well-field within a groundwater uranium (U) plume in the groundwater-surface water transition zone was monitored for a three year period for groundwater elevation and dissolved solutes. The plume discharges to the Columbia River, which displays a dramatic spring stage surge resulting from mountain snowmelt. Groundwater exhibits a low hydrologic gradient and chemical differences with river water. River water intrudes the site in spring. Specific aims were to assess the impacts of river intrusion on dissolved uranium (Uaq), specific conductance (SpC), and other solutes, and to discriminate between transport, geochemical, and source term heterogeneity effects. Time series trends for Uaq and SpC were complex and displayed large temporal well-to well variability as a result of water table elevation fluctuations, river water intrusion, and changes in groundwater flow directions. The wells were clustered into subsets exhibiting common temporal behaviors resulting from the intrusion dynamics of river water and the location of source terms. Concentration hot spots were observed in groundwater that varied in location with increasing water table elevation. Heuristic reactive transport modeling with PFLOTRAN demonstrated that mobilized U was transported between wells and source terms in complex trajectories, and was diluted as river water entered and exited the groundwater system. While uranium time-series concentration trends varied significantly from year to year as a result of climate-caused differences in the spring hydrograph, common and partly predictable response patterns were observed that were driven by water table elevation, and the extent and duration of the river water intrusion event.

  15. Impact of lux gene insertion on bacterial surface properties and transport.

    Science.gov (United States)

    Chen, Gang; Srinivasa Ranga, Vijay Penagonda; Mao, Yongjun; Chen, Kevin; Qiao, Hanzi

    2008-03-01

    Genetic markers have been in popular use for tracing microbial movement in the environment. However, the impact of genetic marker insertion on microbial surface properties and consequent transport is often ignored. For this research, we investigated the impact of luminescence-based genetic marker insertion on bacterial surface properties and transport. Typical Gram-positive bacterial strains of Lactobacillus casei, Streptococcus mitis and Micrococcus luteus were used as model bacterial strains in this research. We manipulated gene transfer to observe the impact of lux gene insertion on bacterial surface properties based on contact angle measurements, and we conducted column experiments to evaluate the impact of lux gene insertion on bacterial transport. After lux gene insertion, bacterial interactions with the porous media increased, demonstrating stronger deposition potential in the porous media. Accordingly, retention of the daughter strains increased. Lux gene insertion also resulted in an increase in bacterial dispersion and equilibrium adsorption in the porous media. The bacterial deposition coefficient was found to correlate with the free energy of interactions between bacteria and the porous media.

  16. Passive scalar transport to and from the surface of a Pocillopora coral colony

    Science.gov (United States)

    Hossain, Md Monir; Staples, Anne

    2016-11-01

    Three-dimensional simulations of flow through a single Pocillopora coral colony were performed to examine the interaction between the flow conditions and scalar transport near a coral colony. With corals currently undergoing a third global bleaching event, a fuller understanding of the transport of nutrients, weak temperature gradients, and other passive scalars to and from the coral polyp tissue is more important than ever. The complex geometry of a coral colony poses a significant challenge for numerical simulation. To simplify grid generation and minimize computational cost, the immersed boundary method was implemented. Large eddy simulation was chosen as the framework to capture the turbulent flow field in the range of realistic Reynolds numbers of 5,000 to 30,000 and turbulent Schmidt numbers of up to 1,000. Both uniform and oscillatory flows through the colony were investigated. Significant differences were found between the cases when the scalar originated at the edge of the flow domain and was transported into the colony, versus when the scalar originated on the surface of the colony and was transported away from the coral. The domain-to-colony transport rates were found to be orders of magnitude higher than the colony-to-domain rates.

  17. DOE Safety Metrics Indicator Program (SMIP) Fiscal Year 2001 Fourth Quarter Report of Packaging- and Transportation-related Occurrences

    Energy Technology Data Exchange (ETDEWEB)

    Dickerson, L.S.

    2001-11-30

    The Safety Metrics Indicator Program (SMIP) retrieved 44 packaging- or transportation-related occurrences from the Occurrence Reporting and Processing System (ORPS) during the period from July 1 through September 30, 2001. Only those incidents that occur in preparation for transport, during transport, and during unloading of hazardous material are considered as packaging- or transportation-related occurrences. Other incidents with packaging and transportation (P and T) significance but not involving hazardous material (such as vehicle accidents or empty packagings) are not rated to the SMIP criteria, but are archived in the SMIP Subsidiary Database of occurrences, a sub-database of the main SMIP P and T Occurrence Database. Thirty-two of the originally-selected 44 occurrences were appropriate for classification to the SMIP criteria, only 7 of which have offsite applicability. Eight of the original 44 reports are archived in a subsidiary database because they either do not involve the transport of hazardous material or do not involve transport by vehicle, plane, boat, or rail. The others either were deleted because more thorough review revealed that they were not strictly related to P and T or were canceled by the reporting site and removed from the ORPS. These occurrences have not been normalized as in the Annual Report of Occurrences because the necessary information is not yet available. The number and severity of the selected occurrence reports (ORs) are consistent with historical reporting. Contamination events continue to be among the most common type of occurrences; however, ''Shipping Preparation'' events decreased this quarter to only 4 events from the 21 reported last quarter. None of the 32 ORs that were rated had event consequence measures (W{sub EC}) greater than 2; 14 of them were categorized as having a W{sub EC} of 1. This means that all of the fourth-quarter FY 2001 ORs had only slight consequences at worst (i.e., resulting in

  18. A field study of colloid transport in surface and subsurface flows

    Science.gov (United States)

    Zhang, Wei; Tang, Xiang-Yu; Xian, Qing-Song; Weisbrod, Noam; Yang, Jae E.; Wang, Hong-Lan

    2016-11-01

    Colloids have been recognized to enhance the migration of strongly-sorbing contaminants. However, few field investigations have examined combined colloid transport via surface runoff and subsurface flows. In a headwater catchment of the upper Yangtze River, a 6 m (L) by 4 m (W) sloping (6°) farmland plot was built by cement walls to form no-flow side boundaries. The plot was monitored in the summer of 2014 for the release and transport of natural colloids via surface runoff and subsurface flows (i.e., the interflow from the soil-mudrock interface and fracture flow from the mudrock-sandstone interface) in response to rain events. The water sources of the subsurface flows were apportioned to individual rain events using a two end-member model (i.e., mobile pre-event soil water extracted by a suction-cup sampler vs. rainwater (event water)) based on δ18O measurements. For rain events with high preceding soil moisture, mobile pre-event soil water was the main contributor (generally >60%) to the fracture flow. The colloid concentration in the surface runoff was 1-2 orders of magnitude higher than that in the subsurface flows. The lowest colloid concentration was found in the subsurface interflow, which was probably the result of pore-scale colloid straining mechanisms. The rainfall intensity and its temporal variation govern the dynamics of the colloid concentrations in both surface runoff and subsurface flows. The duration of the antecedent dry period affected not only the relative contributions of the rainwater and the mobile pre-event soil water to the subsurface flows but also the peak colloid concentration, particularly in the fracture flow. The rain period because their transport in association with colloids may occur rapidly over long distances via both surface runoff and subsurface flows with rainfall.

  19. Surface plasmon resonance biosensors for detection of pathogenic microorganisms: strategies to secure food and environmental safety.

    Science.gov (United States)

    Bergwerff, Aldert A; van Knapen, Frans

    2006-01-01

    This review describes the exploitation of exclusively optical surface plasmon resonance (SPR) biosensors for the direct and indirect detection of pathogenic microorganisms in food chains and the environment. Direct detection is, in most cases, facilitated by the use of defined monoclonal or polyclonal antibodies raised against (a part of) the target pathogenic microorganisms. The antibodies were immobilized to a solid phase of the sensor to capture the microbe from the sample. Alternatively, antibodies were used in an inhibition-like assay involving incubation with the target organism prior to analysis of nonbound antibodies. The free immunoglobins were screened on a sensor surface coated with either purified antigens or with Fc or Fab binding antibodies. Discussed examples of these approaches are the determination of Escherichia coli O1 57:H7, Salmonella spp., and Listeria monocytogenes. Another direct detection strategy involved SPR analysis of polymerase chain reaction products of Shiga toxin-2 genes reporting the presence of E. coli O157:H7 in human stool. Metabolic products have been exploited as biomarkers for the presence of a microbial agent, such as enterotoxin B and a virulence factor for the occurrence of Staphylococcus aureus and Streptococcus suis, respectively. Indirect detection, on the other hand, is performed by analysis of a humoral immune response of the infected animal or human. By immobilization of specific antigenic structures, infections with Herpes simplex and human immunodeficiency viruses, Salmonella and Treponema pallidum bacteria, and Schistosoma spp. parasites were revealed using human, avian, and porcine sera and avian eggs. Bound antibodies were easily isotyped using an SPR biosensor to reveal the infection history of the individual. Discussed studies show the recent recognition of the suitability of this type of instrument for (rapid) detection of health-threatening microbes to food and environmental microbial safety.

  20. Multivariate qualitative analysis of banned additives in food safety using surface enhanced Raman scattering spectroscopy.

    Science.gov (United States)

    He, Shixuan; Xie, Wanyi; Zhang, Wei; Zhang, Liqun; Wang, Yunxia; Liu, Xiaoling; Liu, Yulong; Du, Chunlei

    2015-02-25

    A novel strategy which combines iteratively cubic spline fitting baseline correction method with discriminant partial least squares qualitative analysis is employed to analyze the surface enhanced Raman scattering (SERS) spectroscopy of banned food additives, such as Sudan I dye and Rhodamine B in food, Malachite green residues in aquaculture fish. Multivariate qualitative analysis methods, using the combination of spectra preprocessing iteratively cubic spline fitting (ICSF) baseline correction with principal component analysis (PCA) and discriminant partial least squares (DPLS) classification respectively, are applied to investigate the effectiveness of SERS spectroscopy for predicting the class assignments of unknown banned food additives. PCA cannot be used to predict the class assignments of unknown samples. However, the DPLS classification can discriminate the class assignment of unknown banned additives using the information of differences in relative intensities. The results demonstrate that SERS spectroscopy combined with ICSF baseline correction method and exploratory analysis methodology DPLS classification can be potentially used for distinguishing the banned food additives in field of food safety.

  1. Multivariate qualitative analysis of banned additives in food safety using surface enhanced Raman scattering spectroscopy

    Science.gov (United States)

    He, Shixuan; Xie, Wanyi; Zhang, Wei; Zhang, Liqun; Wang, Yunxia; Liu, Xiaoling; Liu, Yulong; Du, Chunlei

    2015-02-01

    A novel strategy which combines iteratively cubic spline fitting baseline correction method with discriminant partial least squares qualitative analysis is employed to analyze the surface enhanced Raman scattering (SERS) spectroscopy of banned food additives, such as Sudan I dye and Rhodamine B in food, Malachite green residues in aquaculture fish. Multivariate qualitative analysis methods, using the combination of spectra preprocessing iteratively cubic spline fitting (ICSF) baseline correction with principal component analysis (PCA) and discriminant partial least squares (DPLS) classification respectively, are applied to investigate the effectiveness of SERS spectroscopy for predicting the class assignments of unknown banned food additives. PCA cannot be used to predict the class assignments of unknown samples. However, the DPLS classification can discriminate the class assignment of unknown banned additives using the information of differences in relative intensities. The results demonstrate that SERS spectroscopy combined with ICSF baseline correction method and exploratory analysis methodology DPLS classification can be potentially used for distinguishing the banned food additives in field of food safety.

  2. A physically-based integrated numerical model for flow, upland erosion, and contaminant transport in surface-subsurface systems

    Institute of Scientific and Technical Information of China (English)

    HE ZhiGuo; WU WeiMing

    2009-01-01

    This paper presents a physically-based integrated hydrologic model that can simulate the rain-fall-induced 2D surface water flow, 3D variably saturated subsurface flow, upland soil erosion and transport, and contaminant transport in the surface-subsurface system of a watershed.The model couples surface and subsurface flows based on the assumption of continuity conditions of pressure head and exchange flux at the ground, considering infiltration and evapotranspiration.The upland rill/interrill soil erosion and transport are simulated using a non-equilibrium transport model.Con-taminant transport in the integrated surface and subsurface domains is simulated using advec-tion-diffusion equations with mass changes due to sediment sorption and desorption and exchanges between two domains due to infiltration, diffusion, and bed change.The model requires no special treatments at the interface of upland areas and streams and is suitable for wetland areas and agricul-tural watersheds with shallow streams.

  3. Satellite Remote Sensing and Transportation Lifelines: Safety and Risk Analysis Along Rural Roads

    Science.gov (United States)

    Williamson, R.

    the application of satellite Earth Observation (EO) methods to the analysis of transportation networks. Other geospatial technologies, including geographic information systems (GIS) and the Global Positioning System (GPS), sharply enhance the utility of EO data in identifying potential road hazards and providing an objective basis for allocating resources to reduce their risks. In combination, these powerful information technologies provide substantial public benefits and increased business opportunities to remote sensing value-added firms. departments in rural jurisdictions improve the trafficability of the roads under their management during severe weather. We are developing and testing these methods in the U.S. Southwest, where thousands of kilometers of unimproved and graded dirt roads cross Native American reservations. This generally arid region is nevertheless subject to periodic summer rainstorms and winter snow and ice, creating hazardous conditions for the region's transportation lifelines. Arizona and Southeast Utah, as well as digital terrain models from the U.S. Geological Survey. We have analyzed several risk factors, such as slope, road curvature, and intersections, by means of multi-criteria evaluation (MCE) on both unimproved and improved roads. In partnership with the Hopi Indian Nation in Arizona, we have acquired and analyzed GPS road centerline data and accident data that validate our methodology. hazards along paved and unpaved roads of the American Southwest. They are also transferable to the international settings, particularly in similarly arid climates.

  4. Examining Lagrangian surface transport during a coastal upwelling in the Gulf of Finland, Baltic Sea

    Science.gov (United States)

    Delpeche-Ellmann, Nicole; Mingelaitė, Toma; Soomere, Tarmo

    2017-07-01

    We employ in-situ surface drifters and satellite derived sea surface temperature data to examine the impact that an upwelling event may have on mixing and Lagrangian transport of surrounding surface waters. The test area is located near the southern coast of the Gulf of Finland where easterly winds are known to trigger intense coastal upwellings. The analysis is based on the comparison of motions of three drifters that follow the currents in the uppermost layer with a thickness of 2 m with MODIS-based sea surface temperature data and high-quality open sea wind time series. The presence of an upwelling event superseded the classic Ekman-type drift of the surface layer and considerably slowed down the average speed of surface currents in the region affected by the upwelled cold water jet and its filaments. The drifters tended to stay amidst the surrounding surface waters. The properties of mixing were evaluated using the daily rate of temperature change along several transects. The upwelled cooler water largely kept its identity during almost the entire duration of the upwelling event. Intense mixing started at a later stage of the upwelling and continued after the end of the event when the winds that have driven the entire process began to subside.

  5. Study on the creation and destruction of transport barriers via the effective safety factors for energetic particles

    Science.gov (United States)

    Ogawa, Shun; Leoncini, Xavier; Dif-Pradalier, Guilhem; Garbet, Xavier

    2016-12-01

    Charged particles with low kinetic energy move along the magnetic field lines, but so do not the energetic particles. We investigate the topological structure changes in the phase space of energetic particles with respect to the magnetic one. For this study, cylindrical magnetic fields with non-monotonic safety factors that induce the magnetic internal transport barrier are considered. We show that the topological structure of the magnetic field line and of the particle trajectories can be quite different. We explain this difference using the concept of an effective particle q-profile. Using this notion, we can investigate the location and existence of resonances for particle orbits that are different from the magnetic ones. These are examined both numerically by integrating an equation of motion and theoretically by the use of Alfvén's guiding center theory and by the use of an effective reduced Hamiltonian for the integrable unperturbed system. It is clarified that, for the energetic particles, the grad B drift effect shifts the resonances and the drift induced by curvature of the magnetic field line leads to the vanishing of the resonances. As a result, we give two different mechanisms that lead to the creation of transport barriers for energetic particles in the region where the magnetic field line is chaotic.

  6. PAT-2 (Plutonium Air-Transportable Model 2) safety analysis report

    Energy Technology Data Exchange (ETDEWEB)

    Andersen, J.A.; Davis, E.J.; Duffey, T.A.; Dupree, S.A.; George, O.L. Jr.; Ortiz, Z.

    1981-07-01

    The PAT-2 package is designed for the safe transport of plutonium and/or uranium in small quantities. The PAT-2 package is resistant to severe accidents, including that of a high-speed jet aircraft crash, and is designed to withstand such environments as extreme impact, crushing, puncturing and slashing loads, severe hydrocarbon-fueled fires, and deep underwater immersion, with no escape of contents. The package meets the requirements of 10 CFR 71 for Fissile Class I packages with a cargo of 15 grams of Pu-239, or other isotopic forms described herein, not to exceed 2 watts of thermal activity. This SAR presents design and oprational information including evaluations and analyses, test results, operating procedures, maintenance, and quality assurance information.

  7. Emergent Conformal Symmetry and Geometric Transport Properties of Quantum Hall States on Singular Surfaces

    Science.gov (United States)

    Can, T.; Chiu, Y. H.; Laskin, M.; Wiegmann, P.

    2016-12-01

    We study quantum Hall states on surfaces with conical singularities. We show that the electronic fluid at the cone tip possesses an intrinsic angular momentum, which is due solely to the gravitational anomaly. We also show that quantum Hall states behave as conformal primaries near singular points, with a conformal dimension equal to the angular momentum. Finally, we argue that the gravitational anomaly and conformal dimension determine the fine structure of the electronic density at the conical point. The singularities emerge as quasiparticles with spin and exchange statistics arising from adiabatically braiding conical singularities. Thus, the gravitational anomaly, which appears as a finite size correction on smooth surfaces, dominates geometric transport on singular surfaces.

  8. Safety and quality outcomes in peritoneal surface malignancy patients: developing a national center for excellence in Colombia.

    Science.gov (United States)

    Arias, Fernando; Herrera-Almario, Gabriel; Pozo, Marcos E; Londoño-Schimmer, Eduardo; Otero, Jorge M; Cardona, Andres; Cortes, Natalia; Mora, Marta

    2015-05-01

    Cytoreductive surgery and hyperthermic intraperitoneal chemotherapy (CRS + HIPEC) is being used more frequently for the treatment of peritoneal surface malignancies. There are a paucity of data regarding safety and quality outcomes in this group of patients. The aim of this study was to evaluate safety events and quality measures in a group of patients who underwent CRS + HIPEC. All patients who underwent CRS + HIPEC procedures between December 2007 and March 2014 were included. All safety-related events and quality outcomes were reviewed. Major events were defined as occurrences in which there was harm to patient or healthcare personnel. Minor events were defined as quality or safety events in which there was potential for damage. A total of 72 patients were included. The mean Peritoneal Cancer Index for the study group was 20.5. One hundred percent compliance for informed consent, patient identification and surgical site marking, and antibiotic and venous thromboembolism prophylaxis guidelines was identified. The incidence of major safety events was 37.5 %. Minor events occurred in 47.2 % of patients. There was a 2.78 % 30-day mortality in the study group. One in three patients undergoing CRS + HIPEC procedures experienced a major safety or quality event before, during, or after surgery. Adequate surgical care alone is not sufficient to prevent these occurrences. Active surveillance of safety events and quality leads to early detection and development of improvement plans. New CRS + HIPEC centers need to adhere to strict safety and quality guidelines to ensure excellent patient outcomes.

  9. Fate and transport of glyphosate and aminomethylphosphonic acid in surface waters of agricultural basins

    Science.gov (United States)

    Coupe, R.H.; Kalkhoff, S.J.; Capel, P.D.; Gregoire, C.

    2012-01-01

    Background: Glyphosate [N-(phosphonomethyl)glycine] is a herbicide used widely throughout the world in the production of many crops and is heavily used on soybeans, corn and cotton. Glyphosate is used in almost all agricultural areas of the United States, and the agricultural use of glyphosate has increased from less than 10 000 Mg in 1992 to more than 80 000 Mg in 2007. The greatest intensity of glyphosate use is in the midwestern United States, where applications are predominantly to genetically modified corn and soybeans. In spite of the increase in usage across the United States, the characterization of the transport of glyphosate and its degradate aminomethylphosphonic acid (AMPA) on a watershed scale is lacking. Results: Glyphosate and AMPA were frequently detected in the surface waters of four agricultural basins. The frequency and magnitude of detections varied across basins, and the load, as a percentage of use, ranged from 0.009 to 0.86% and could be related to three general characteristics: source strength, rainfall runoff and flow route. Conclusions: Glyphosate use in a watershed results in some occurrence in surface water; however, the watersheds most at risk for the offsite transport of glyphosate are those with high application rates, rainfall that results in overland runoff and a flow route that does not include transport through the soil. ?? 2011 Society of Chemical Industry.

  10. Modeling pollutant transport in overland flow over non-planar and non-homogenous infiltrating surfaces

    Institute of Scientific and Technical Information of China (English)

    Zhi-guo HE; Gokmen TAYFUR; Qi-hua RAN; Hao-xuan WENG

    2013-01-01

    Pollutant transport in overland flow over surfaces with spatially varying microtopography,roughness,and infiltration was investigated using the diffusion wave equation and transport rate-based equation.The finite volume method in space and an implicit backward difference scheme in time were employed in the numerical solution of the 2D governing equations.The developed model was first tested against an analytical solution and an experimental study involving overland flow and the associated pollutant transport,subsequently a series of numerical tests were carried out.Non-point source pollution was investigated under spatially varying microtopography,roughness,and infiltration.The simulation results showed that microtopography and roughness were the dominant factors causing significant spatial variations in solute concentration.When the spatially varying microtopography was replaced by a smooth surface,the result was an overestimation of the solute rate at the outlet of the upland.On the other hand,when the spatially varying roughness was replaced by the average roughness and spatially varying infiltration rate by the average infiltration rate,the pollutant discharge at the outlet of the upland was not significantly affected.The numerical results further showed that one cannot ignore the spatial variations of slope and roughness when investigating the local pollutant concentration distribution.

  11. The Fate and Transport of Glyphosate and AMPA into Surface Waters of Agricultural Watersheds

    Science.gov (United States)

    Coupe, R.; Kalkhoff, S.; Capel, P.; Gregoire, C.

    2010-12-01

    Glyphosate [N-(phosphonomethyl)glycine] is a herbicide used widely throughout the world in the production of many crops, but is particularly heavily used on crops which are genetically modified to be glyphosate tolerant: predominately soybeans, corn, potatoes, and cotton. Glyphosate is used extensively in almost all agricultural areas of the United States, and annual application has increased from less than 10,000 Mg in 1992 to more than 80,000 Mg in 2007. The greatest areal use is in the Midwest where glyphosate is applied on genetically modified corn and soybeans. Although use is increasing, the characterization of glyphosate transport on the watershed scale is lacking. Glyphosate, and its degradate AMPA [aminomethylphosphoric acid], was frequently detected in the surface waters of four agricultural watersheds. The load as a percent of use of glyphosate ranged from 0.009 to 0.86 percent and can be related to three factors: source strength, hydrology, and flowpath. Glyphosate use within a watershed results in some occurrence in surface water at the part per billion level; however watersheds most at risk for the offsite transport of glyphosate are those with high application rates, rainfall that results in overland runoff, and a flowpath that does not include transport through the soil.

  12. Transport and dispersion of pollutants in surface impoundments: a finite element model

    Energy Technology Data Exchange (ETDEWEB)

    Yeh, G.T.

    1980-07-01

    A surface impoundment model in finite element (SIMFE) is presented to enable the simulation of flow circulations and pollutant transport and dispersion in natural or artificial lakes, reservoirs or ponds with any number of islands. This surface impoundment model consists of two sub-models: hydrodynamic and pollutant transport models. Both submodels are simulated by the finite element method. While the hydrodynamic model is solved by the standard Galerkin finite element scheme, the pollutant transport model can be solved by any of the twelve optional finite element schemes built in the program. Theoretical approximations and the numerical algorithm of SIMFE are described. Detail instruction of the application are given and listing of FORTRAN IV source program are provided. Two sample problems are given. One is for an idealized system with a known solution to show the accuracy and partial validation of the models. The other is applied to Prairie Island for a set of hypothetical input data, typifying a class of problems to which SIMFE may be applied.

  13. Preliminary Assessment of Mercury Atmosphere-Surface Exchange Parameterizations for Incorporation into Chemical Transport Models

    Science.gov (United States)

    Khan, T.; Agnan, Y.; Obrist, D.; Selin, N. E.; Urban, N. R.; Wu, S.; Perlinger, J. A.

    2015-12-01

    Inadequate representation of process-based mechanisms of exchange behavior of elemental mercury (Hg0) and decoupled treatment of deposition and emission are two major limitations of parameterizations of atmosphere-surface exchange flux commonly incorporated into chemical transport models (CTMs). Of nineteen CTMs for Hg0 exchange we reviewed (ten global, nine regional), eight global and seven regional models have decoupled treatment of Hg0 deposition and emission, two global models include no parameterization to account for emission, and the remaining two regional models include coupled deposition and emission parameterizations (i.e., net atmosphere-surface exchange). The performance of atmosphere-surface exchange parameterizations in CTMs depends on parameterization uncertainty (in terms of both accuracy and precision) and feasibility of implementation. We provide a comparison of the performance of three available parameterizations of net atmosphere-surface exchange. To evaluate parameterization accuracy, we compare predicted exchange fluxes to field measurements conducted over a variety of surfaces compiled in a recently developed global database of terrestrial Hg0 surface-atmosphere exchange flux measurements. To assess precision, we estimate the sensitivity of predicted fluxes to the imprecision in parameter input values, and compare this sensitivity to that derived from analysis of the global Hg0 flux database. Feasibility of implementation is evaluated according to the availability of input parameters, computational requirements, and the adequacy of uncertainty representation. Based on this assessment, we provide suggestions for improved treatment of Hg0 net exchange processes in CTMs.

  14. Effects of magnetic drift tangential to magnetic surfaces on neoclassical transport in non-axisymmetric plasmas

    CERN Document Server

    Matsuoka, Seikichi; Kanno, Ryutaro; Sugama, Hideo

    2015-01-01

    In evaluating neoclassical transport by radially-local simulations, the magnetic drift tangential to a flux surface is usually ignored in order to keep the phase-space volume conservation. In this paper, effect of the tangential magnetic drift on the local neoclassical transport are investigated. To retain the effect of the tangential magnetic drift in the local treatment of neoclassical transport, a new local formulation for the drift kinetic simulation is developed. The compressibility of the phase-space volume caused by the tangential magnetic drift is regarded as a source term for the drift kinetic equation, which is solved by using a two-weight $\\delta f$ Monte Carlo method for non-Hamiltonian system [G. Hu and J. A. Krommes, Phys. Plasmas $\\rm \\textbf{1}$, 863 (1994)]. It is demonstrated that the effect of the drift is negligible for the neoclassical transport in tokamaks. In non-axisymmetric systems, however, the tangential magnetic drift substantially changes the dependence of the neoclassical transpo...

  15. Surface oxygen vacancy and oxygen permeation flux limits of perovskite ion transport membranes

    KAUST Repository

    Hunt, Anton

    2015-09-01

    © 2015 Elsevier B.V. The mechanisms and quantitative models for how oxygen is separated from air using ion transport membranes (ITMs) are not well understood, largely due to the experimental complexity for determining surface exchange reactions at extreme temperatures (>800°C). This is especially true when fuels are present at the permeate surface. For both inert and reactive (fuels) operations, solid-state oxygen surface vacancies (δ) are ultimately responsible for driving the oxygen flux, JO2. In the inert case, the value of δ at either surface is a function of the local PO2 and temperature, whilst the magnitude of δ dictates both the JO2 and the inherent stability of the material. In this study values of δ are presented based on experimental measurements under inert (CO2) sweep: using a permeation flux model and local PO2 measurements, collected by means of a local gas-sampling probe in our large-scale reactor, we can determine δ directly. The ITM assessed was La0.9Ca0.1FeO3-δ (LCF); the relative resistances to JO2 were quantified using the pre-defined permeation flux model and local PO2 values. Across a temperature range from 825°C to 1056°C, δ was found to vary from 0.007 to 0.029 (<1%), safely within material stability limits, whilst the permeate surface exchange resistance dominates. An inert JO2 limit was identified owing to a maximum sweep surface δ, δmaxinert. The physical presence of δmaxinert is attributed to a rate limiting step shift from desorption to associative electron transfer steps on the sweep surface as PO2 is reduced. Permeate surface exchange limitations under non-reactive conditions suggest that reactive (fuel) operation is necessary to accelerate surface chemistry for future work, to reduce flux resistance and push δpast δmaxinert in a stable manner.

  16. The effects of surface aging on nanoparticle fate and transport in natural and engineered porous media

    Science.gov (United States)

    Mittelman, Anjuliee M.

    Nanomaterials will be subjected to various surface transformations in the environment and within water and wastewater treatment systems. A comprehensive understanding of the fate and transport behavior of "aged" nanomaterials in both natural and engineered porous media is required in order to accurately quantify ecological and human health risks. This research sought to (1) evaluate the impact of ultraviolet (UV) light aging on nanoparticle transport in water-saturated porous media; and (2) assess the effects of influent water quality on silver nanoparticle retention and dissolution in ceramic water filters. Additionally, the value of quartz crystal microbalance (QCM-D) data in nanoparticle fate and transport studies was evaluated by comparing deposition behavior in complementary QCM-D and sand columns experiments. Silver (nAg) and iron oxide nanoparticles exposed to UV light were up to 50% more strongly retained in porous media compared with freshly prepared suspensions due to less negative surface charge and larger aggregate sizes. UV-aged nAg were more prone to dissolution in sand columns, resulting in effluent Ag+ concentrations as high as 1.2 mg/L. In ceramic water filters, dissolution and cation exchange processes controlled silver release into treated water. The use of acidic, high salinity, or high hardness water accelerated oxidative dissolution of the silver coating and resulted in effluent silver concentrations 5-10 times above international drinking water guidelines. Results support the recommendation for a regular filter replacement or silver re-application schedule to ensure ongoing efficacy. Taken in concert, these research findings suggest that oxidative aging of nanomaterial surfaces (either through exposure to UV light or aggressive water chemistries) will alter the fate of nanomaterials in the environment and may decrease the effective lifetime of devices which utilize nanotechnology. Corresponding QCM-D and column experiments revealed that

  17. 30 CFR 250.802 - Design, installation, and operation of surface production-safety systems.

    Science.gov (United States)

    2010-07-01

    ... production-safety systems. 250.802 Section 250.802 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT... Analysis Checklists are included in API RP 14C you must utilize the analysis technique and documentation...., type cable, conduit, or wire). (ii) Elementary electrical schematic of any platform safety...

  18. 49 CFR 213.63 - Track surface.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Track surface. 213.63 Section 213.63..., DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Track Geometry § 213.63 Track surface. Each owner of the track to which this part applies shall maintain the surface of its track within the limits prescribed...

  19. Electrostatic potential variation on the flux surface and its impact on impurity transport

    CERN Document Server

    García-Regaña, J M; Turkin, Y; Kleiber, R; Helander, P; Maaßberg, H; Alonso, J A; Velasco, J L

    2015-01-01

    The particle transport of impurities in magnetically confined plasmas under some conditions does not find, neither quantitatively nor qualitatively, a satisfactory theory-based explanation. This compromise the successful realization of thermo-nuclear fusion for energy production since its accumulation is known to be one of the causes that leads to the plasma breakdown. In standard reactor-relevant conditions this accumulation is in most stellarators intrinsic to the lack of toroidal symmetry, that leads to the neoclassical electric field to point radially inwards. This statement, that the standard theory allows to formulate, has been contradicted by some experiments that showed weaker or no accumulation under such conditions \\cite{Ida_pop_16_056111_2009, Yoshinuma_nf_49_062002_2009}. The charge state of the impurities makes its transport more sensitive to the electric fields. Thus, the short length scale turbulent electrostatic potential or its long wave-length variation on the flux surface $\\Phi_{1}$ -- that...

  20. Phosphorus transport with runoff of simulated rainfall from purple-soil cropland of different surface conditions

    Institute of Scientific and Technical Information of China (English)

    GAO Yang; ZHANG Jin-zhong; ZHU Bo; ZHOU Pei; MIAO Chi-yuan; WANG Tao

    2008-01-01

    We investigated the patterns of phosphorus transport from purple-soil cropland of 5° and 10° slopes with bare and vegetated surfaces, respectively. Each type of land was tested under a simulated moderate rainfall of 0.33 mm/min, a downfall of 0.90 mm/min, and a rainstorm of 1.86 mm/min. Runoff dynamics and changes in the export amount of phosphorus are influenced by the rainfall intensity, the slope and surface conditions of cropland. The vegetation diverts rain water from the surface into soil and helps the formation of a subsurface runoff, but has little influence on runoff process at the same sloping degree. Vegetated soil has a smaller phosphorous loss, particularly much less in the particulate form. A heavier rainfall flushes away more phosphorous. Rainwater percolating soil carries more dissolved phosphorous than particulate phosphorous. Understanding the patterns of phosphorous transport under various conditions from purple soil in the middle of Sichuan basin is helpful for developing countermeasures against non-point-source pollution resulting in the eutrophication of water bodies in this region that could, if not controlled properly, deteriorate the water quality of the Three Gorges Reservoir.

  1. A propagating ATPase gradient drives transport of surface-confined cellular cargo.

    Science.gov (United States)

    Vecchiarelli, Anthony G; Neuman, Keir C; Mizuuchi, Kiyoshi

    2014-04-01

    The faithful segregation of duplicated genetic material into daughter cells is critical to all organisms. In many bacteria, the segregation of chromosomes involves transport of "centromere-like" loci over the main body of the chromosome, the nucleoid, mediated by a two-protein partition system: a nonspecific DNA-binding ATPase, ParA, and an ATPase stimulator, ParB, which binds to the centromere-like loci. These systems have previously been proposed to function through a filament-based mechanism, analogous to actin- or microtubule-based movement. Here, we reconstituted the F-plasmid partition system using a DNA-carpeted flow cell as an artificial nucleoid surface and magnetic beads coated with plasmid partition complexes as surface-confined cargo. This minimal system recapitulated directed cargo motion driven by a surface ATPase gradient that propagated with the cargo. The dynamics are consistent with a diffusion-ratchet model, whereby the cargo dynamically establishes, and interacts with, a concentration gradient of the ATPase. A chemophoresis force ensues as the cargo perpetually chases the ATPase gradient, allowing the cargo to essentially "surf" the nucleoid on a continuously traveling wave of the ATPase. Demonstration of this non-filament-based motility mechanism in a biological context establishes a distinct class of motor system used for the transport and positioning of large cellular cargo.

  2. Rayleigh surface waves, phonon mode conversion, and thermal transport in nanostructures

    Science.gov (United States)

    Maurer, Leon; Knezevic, Irena

    We study the effects of phonon mode conversion and Rayleigh (surface) waves on thermal transport in nanostructures. We present a technique to calculate thermal conductivity in the elastic-solid approximation: a finite-difference time-domain (FDTD) solution of the elastic or scalar wave equations combined with the Green-Kubo formula. The technique is similar to an equilibrium molecular dynamics simulation, captures phonon wave behavior, and scales well to nanostructures that are too large to simulate with many other techniques. By imposing fixed or free boundary conditions, we can selectively turn off mode conversion and Rayleigh waves to study their effects. In the example case of graphenelike nanoribbons with rough edges, we find that mode conversion among bulk modes has little effect on thermal transport, but that conversion between bulk and Rayleigh waves can significantly reduce thermal conductivity. With increasing surface disorder, Rayleigh waves readily become trapped by the disorder and draw energy away from the propagating bulk modes, which lowers thermal conductivity. We discuss the implications on the accuracy of popular phonon-surface scattering models that stem from scalar wave equations and cannot capture mode conversion to Rayleigh waves.

  3. What Supergranule Flow Models Tell Us About the Sun's Surface Shear Layer and Magnetic Flux Transport

    Science.gov (United States)

    Hathaway, David

    2011-01-01

    Models of the photospheric flows due to supergranulation are generated using an evolving spectrum of vector spherical harmonics up to spherical harmonic wavenumber l1500. Doppler velocity data generated from these models are compared to direct Doppler observations from SOHO/MDI and SDO/HMI. The models are adjusted to match the observed spatial power spectrum as well as the wavenumber dependence of the cell lifetimes, differential rotation velocities, meridional flow velocities, and relative strength of radial vs. horizontal flows. The equatorial rotation rate as a function of wavelength matches the rotation rate as a function of depth as determined by global helioseismology. This leads to the conclusions that the cellular structures are anchored at depths equal to their widths, that the surface shear layer extends to at least 70 degrees latitude, and that the poleward meridional flow decreases in amplitude and reverses direction at the base of the surface shear layer (approx.35 Mm below the surface). Using the modeled flows to passively transport magnetic flux indicates that the observed differential rotation and meridional flow of the magnetic elements are directly related to the differential rotation and meridional flow of the convective pattern itself. The magnetic elements are transported by the evolving boundaries of the supergranule pattern (where the convective flows converge) and are unaffected by the weaker flows associated with the differential rotation or meridional flow of the photospheric plasma.

  4. Large scale reactive transport of nitrate across the surface water divide

    Science.gov (United States)

    Kortunov, E.; Lu, C.; Amos, R.; Grathwohl, P.

    2016-12-01

    Groundwater pollution caused by agricultural and atmospheric inputs is a pressing issue in environmental management worldwide. Various researchers have studied different aspects of nitrate contamination since the substantial increase of the agriculture pollution in the second half of the 20th century. This study addresses large scale reactive solute transport in a typical Germany hilly landscapes in a transect crossing 2 valleys: River Neckar and Ammer. The numerical model was constructed compromising a 2-D cross-section accounting for typical fractured mudstones and unconsolidated sediments. Flow modelling showed that the groundwater divide significantly deviates from the surface water divide providing conditions for inter-valley flow and transport. Reactive transport modelling of redox-sensitive solutes (e.g. agriculture nitrate and natural sulfate, DOC, ammonium) with MIN3P was used to elucidate source of nitrate in aquifers and rivers. Since both floodplains, in the Ammer and Neckar valley contain Holocene sediments relatively high in organic carbon, agricultural nitrate is reduced therein and does not reach the groundwater. However, nitrate applied in the hillslopes underlain by fractured oxidized mudrock is transported to the high yield sand and gravel aquifer in the Neckar valley. Therefore, the model predicts that nitrate in the Neckar valley comes, to a large extent, from the neighboring Ammer valley. Moreover, nitrate observed in the rivers and drains in the Ammer valley is very likely geogenic since frequent peat layers there release ammonium which is oxidized as it enters the surface water. Such findings are relevant for land and water quality management.

  5. Importance of 3D Processes Near the Ocean's Surface for Material Transport

    Science.gov (United States)

    Ozgokmen, T. M.

    2014-12-01

    There are a number of practical problems that demand an accurate knowledge of ocean currents near the surface of the ocean. It is known that oceanic coherent features transport heat and carry out vertical exchange of biogeochemical tracers. Ocean currents can affect biological primary production, air-sea gas exchanges and global tracer budgets. Ocean currents are also important for the dispersion of substances that pose a danger to society, economy and human health. Examples of such events include algal blooms, the Fukushima nuclear plant incident in the Pacific Ocean in 2011, and repeated large oil spills in the Gulf of Mexico, namely the IXTOC in 1978 and the Deepwater Horizon event in 2010. Such incidents demand accurate answers to questions such as ``where will the pollutant go?", ``how fast will it get there?" and ``how much pollutant will arrive there?", and in some instances ``where did the pollutant come from?". The answers to these questions are critical to the allocation of limited response resources, and in determining the overall impact of the events. We will summarize the efforts by the Consortium for Advanced Research on Transport of Hydrocarbon in the Environment (CARTHE). One of the primary objectives of CARTHE is to improve predictive modeling capability for flows near the air-sea interface. In particular, two large experiments, Grand Lagrangian Deployment (GLAD) and Surf-zone and Coastal Oil Pathways Experiment (SCOPE), coordinated with real-time modeling were instructive on processes influencing near-surface material transport. Findings on submesoscale flows as well as model deficiencies to capture processes relevant to transport will be discussed. Insight into future modeling and observational plans will be provided.

  6. Law project aiming to enforce the maritime transport safety and fight against the sea pollutions; Proposition de loi tendant a renforcer la securite du transport maritime et a lutter contre les pollutions marines

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-12-01

    Facing the increase of the maritime transport, the poor quality of the ships and the flag of convenience problem, this law project is proposed. It concerns the ships maintenance and safety standards, the delivery of a control certificate, the social rights of the sailors, the coasts and ports access control. (A.L.B.)

  7. A trail to a safer country : conceptual approaches to road safety policies. On behalf of the Ministry of Transport and Public Works, Transport Research Centre TRC.

    NARCIS (Netherlands)

    Mulder, J.A.G. & Wegman, F.C.M.

    2000-01-01

    In all countries of the world, people are trying to improve road safety. In road safety literature, however, there are many indications that road safety improvements are moving slowly. Several causes are given for this: (1) the political priority is relatively low; and (2) it is not well-known how,

  8. Rainfall intensity and phosphorus source effects on phosphorus transport in surface runoff from soil trays.

    Science.gov (United States)

    Shigaki, Francirose; Sharpley, Andrew; Prochnow, Luis Ignacio

    2007-02-01

    Phosphorus runoff from agricultural fields amended with mineral fertilizers and manures has been linked to freshwater eutrophication. A rainfall simulation study was conducted to evaluate the effects of different rainfall intensities and P sources differing in water soluble P (WSP) concentration on P transport in runoff from soil trays packed with a Berks loam and grassed with annual ryegrass (Lolium multiflorum Lam.). Triple superphosphate (TSP; 79% WSP), low-grade super single phosphate (LGSSP; 50% WSP), North Carolina rock phosphate (NCRP; 0.5% WSP) and swine manure (SM; 70% WSP), were broadcast (100 kg total P ha-1) and rainfall applied at 25, 50 and 75 mm h-1 1, 7, 21, and 56 days after P source application. The concentration of dissolved reactive (DRP), particulate (PP), and total P (TP) was significantly (Prunoff with a rainfall intensity of 75 than 25 mm h-1 for all P sources. Further, runoff DRP increased as P source WSP increased, with runoff from a 50 mm h-1 rain 1 day after source application having a DRP concentration of 0.25 mg L-1 for NCRP and 28.21 mg L-1 for TSP. In contrast, the proportion of runoff TP as PP was greater with low (39% PP for NCRP) than high WSP sources (4% PP for TSP) averaged for all rainfall intensities. The increased PP transport is attributed to the detachment and transport of undissolved P source particles during runoff. These results show that P source water solubility and rainfall intensity can influence P transport in runoff, which is important in evaluating the long-term risks of P source application on P transport in surface runoff.

  9. Coupling of morphology to surface transport in ion-beam-irradiated surfaces: normal incidence and rotating targets

    Energy Technology Data Exchange (ETDEWEB)

    Munoz-Garcia, Javier [Grupo Interdisciplinar de Sistemas Complejos (GISC) and School of Mathematical Sciences and Complex and Adaptive Systems Laboratory, University College Dublin, Belfield, Dublin 4 (Ireland); Cuerno, Rodolfo [Departamento de Matematicas and GISC, Universidad Carlos III de Madrid, Avenida de la Universidad 30, E-28911 Leganes (Spain); Castro, Mario [GISC and Grupo de Dinamica No Lineal (DNL), Escuela Tecnica Superior de IngenierIa (ICAI), Universidad Pontificia Comillas de Madrid, E-28015 Madrid (Spain)], E-mail: javiermunozgarcia@gmail.com, E-mail: cuerno@math.uc3m.es, E-mail: mariocastro73@gmail.com

    2009-06-03

    Continuum models have proved their applicability to describe nanopatterns produced by ion-beam sputtering of amorphous or amorphizable targets at low and medium energies. Here we pursue the recently introduced 'hydrodynamic approach' in the cases of bombardment at normal incidence, or of oblique incidence onto rotating targets, known to lead to self-organized arrangements of nanodots. Our approach stresses the dynamical roles of material (defect) transport at the target surface and of local redeposition. By applying results previously derived for arbitrary angles of incidence, we derive effective evolution equations for these geometries of incidence, which are then numerically studied. Moreover, we show that within our model these equations are identical (albeit with different coefficients) in both cases, provided surface tension is isotropic in the target. We thus account for the common dynamics for both types of incidence conditions, namely formation of dots with short-range order and long-wavelength disorder, and an intermediate coarsening of dot features that improves the local order of the patterns. We provide for the first time approximate analytical predictions for the dependence of stationary dot features (amplitude and wavelength) on phenomenological parameters, that improve upon previous linear estimates. Finally, our theoretical results are discussed in terms of experimental data.

  10. A charge transport study in diamond, surface passivated by high-k dielectric oxides

    Energy Technology Data Exchange (ETDEWEB)

    Kovi, Kiran Kumar, E-mail: KiranKumar.Kovi@angstrom.uu.se; Majdi, Saman; Gabrysch, Markus; Isberg, Jan [Division for Electricity, Department of Engineering Sciences, Box 534, Uppsala University, Uppsala SE-751 21 (Sweden)

    2014-11-17

    The recent progress in the growth of high-quality single-crystalline diamond films has sparked interest in the realization of efficient diamond power electronic devices. However, finding a suitable passivation is essential to improve the reliability and electrical performance of devices. In the current work, high-k dielectric materials such as aluminum oxide and hafnium oxide were deposited by atomic layer deposition on intrinsic diamond as a surface passivation layer. The hole transport properties in the diamond films were evaluated and compared to unpassivated films using the lateral time-of-flight technique. An enhancement of the near surface hole mobility in diamond films of up to 27% is observed when using aluminum oxide passivation.

  11. A Controlled Field Pilot for Testing Near Surface CO2 Detection Techniques and Transport Models

    Science.gov (United States)

    Spangler, L. H.; Dobeck, L.

    2007-12-01

    A field facility has been developed to allow controlled studies of near surface CO2transport and detection technologies. The key component of the facility is a shallow horizontal, well slotted over 70m of its length and divided into seven zones via packers with mass flow control in each individual zone. The scale and fluxes were designed to address large scale CO2 storage projects and desired retention rates for those projects and those design parameters will be discussed. A wide variety of detection techniques were deployed by collaborators from Los Alamos National Lab, Lawrence Berkeley National Lab, the National Energy Technology Lab, Pacific Northwest National Lab, Lawrence Livermore National Lab and West Virginia University. Techniques included eddy covariance, soil gas measurements, hyperspectral imaging for plant stress detection, differential absorption LIDAR (both free space atmospheric and below surface soil gas), tracer studies, water sampling, stable isotope studies, and soil flux chambers. An overview of these results will be presented.

  12. Observed and modeled surface Lagrangian transport between coastal regions in the Adriatic Sea with implications for marine protected areas

    Science.gov (United States)

    Carlson, Daniel F.; Griffa, Annalisa; Zambianchi, Enrico; Suaria, Giuseppe; Corgnati, Lorenzo; Magaldi, Marcello G.; Poulain, Pierre-Marie; Russo, Aniello; Bellomo, Lucio; Mantovani, Carlo; Celentano, Paolo; Molcard, Anne; Borghini, Mireno

    2016-04-01

    Surface drifters and virtual particles are used to investigate transport between seven coastal regions in the central and southern Adriatic Sea to estimate the degree to which these regions function as a network. Alongshore coastal currents and cyclonic gyres are the primary circulation features that connected regions in the Adriatic Sea. The historical drifter observations span 25 years and, thus, provide estimates of transport between regions realized by the mean surface circulation. The virtual particle trajectories and a dedicated drifter experiment show that southeasterly Sirocco winds can drive eastward cross-Adriatic transport from the Italian coast near the Gargano Promontory to the Dalmatian Islands in Croatia. Southeasterly winds disrupt alongshore transport on the west coast. Northwesterly Mistral winds enhanced east-to-west transport and resulted in stronger southeastward coastal currents in the western Adriatic current (WAC) and export to the northern Ionian Sea. The central Italian regions showed strong connections from north to south, likely realized by alongshore transport in the WAC. Alongshore, downstream transport was weaker on the east coast, likely due to the more complex topography introduced by the Dalmatian Islands of Croatia. Cross-Adriatic connection percentages were higher for east-to-west transport. Cross-Adriatic transport, in general, occurred via the cyclonic sub-gyres, with westward (eastward) transport observed in the northern (southern) arms of the central and southern gyres.

  13. WAG 2 remedial investigation and site investigation site-specific work plan/health and safety checklist for the sediment transport modeling task

    Energy Technology Data Exchange (ETDEWEB)

    Holt, V.L.; Baron, L.A.

    1994-05-01

    This site-specific Work Plan/Health and Safety Checklist (WP/HSC) is a supplement to the general health and safety plan (HASP) for Waste Area Grouping (WAG) 2 remedial investigation and site investigation (WAG 2 RI&SI) activities [Health and Safety Plan for the Remedial Investigation and Site Investigation of Waste Area Grouping 2 at the Oak Ridge National Laboratory, Oak Ridge, Tennessee (ORNL/ER-169)] and provides specific details and requirements for the WAG 2 RI&SI Sediment Transport Modeling Task. This WP/HSC identifies specific site operations, site hazards, and any recommendations by Oak Ridge National Laboratory (ORNL) health and safety organizations [i.e., Industrial Hygiene (IH), Health Physics (HP), and/or Industrial Safety] that would contribute to the safe completion of the WAG 2 RI&SI. Together, the general HASP for the WAG 2 RI&SI (ORNL/ER-169) and the completed site-specific WP/HSC meet the health and safety planning requirements specified by 29 CFR 1910.120 and the ORNL Hazardous Waste Operations and Emergency Response (HAZWOPER) Program Manual. In addition to the health and safety information provided in the general HASP for the WAG 2 RI&SI, details concerning the site-specific task are elaborated in this site-specific WP/HSC, and both documents, as well as all pertinent procedures referenced therein, will be reviewed by all field personnel prior to beginning operations.

  14. Bulk and surface electron transport in topological insulator candidate YbB{sub 6-δ}

    Energy Technology Data Exchange (ETDEWEB)

    Glushkov, Vladimir V.; Demishev, Sergey V.; Sluchanko, Nikolay E. [Prokhorov General Physics Institute of RAS, Vavilov str. 38, 119991, Moscow (Russian Federation); Moscow Institute of Physics and Technology, Institutskii per. 9, 141700, Dolgoprudny, Moscow Region (Russian Federation); Bozhko, Alexey D.; Bogach, Alexey V.; Semeno, Alexey V.; Voronov, Valeriy V. [Prokhorov General Physics Institute of RAS, Vavilov str. 38, 119991, Moscow (Russian Federation); Dukhnenko, Anatoliy V.; Filipov, Volodimir B.; Shitsevalova, Natalya Yu. [Frantsevich Institute for Problems of Materials Science NAS, Krzhyzhanovsky str. 3, 03680, Kiev (Ukraine); Kondrin, Mikhail V. [Vereshchagin Institute of High Pressure Physics of RAS, 142190, Troitsk, Moscow (Russian Federation); Kuznetsov, Alexey V.; Sannikov, Ilia I. [National Research Nuclear University ' ' MEPhI' ' , Kashirskoe Shosse 31, 115409, Moscow (Russian Federation)

    2016-04-15

    We report the study of transport and magnetic properties of the YbB{sub 6-δ}single crystals grown by inductive zone melting. A strong disparity in the low temperature resistivity, Seebeck and Hall coefficients is established for the samples with the different level of boron deficiency. The effective parameters of the charge transport in YbB{sub 6-δ} are shown to depend on the concentration of intrinsic defects, which is estimated to range from 0.09% to 0.6%. The pronounced variation of Hall mobility μ{sub H} found for bulk holes is induced by the decrease of transport relaxation time from τ ∼ 7.7 fs for YbB{sub 5.994} to τ ∼ 2.2 fs for YbB{sub 5.96}. An extra contribution to conductivity from electrons with μ{sub H}∼ -1000 cm{sup 2} V{sup -1} s{sup -1} and the very low concentration n /n{sub Yb}∼ 10{sup -6} discovered below 20 K for all the single crystals under investigation is suggested to arise from the surface electron states appeared in the inversion layer due to the band bending. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  15. Surface transport and stable trapping of particles and cells by an optical waveguide loop.

    Science.gov (United States)

    Hellesø, Olav Gaute; Løvhaugen, Pål; Subramanian, Ananth Z; Wilkinson, James S; Ahluwalia, Balpreet Singh

    2012-09-21

    Waveguide trapping has emerged as a useful technique for parallel and planar transport of particles and biological cells and can be integrated with lab-on-a-chip applications. However, particles trapped on waveguides are continuously propelled forward along the surface of the waveguide. This limits the practical usability of the waveguide trapping technique with other functions (e.g. analysis, imaging) that require particles to be stationary during diagnosis. In this paper, an optical waveguide loop with an intentional gap at the centre is proposed to hold propelled particles and cells. The waveguide acts as a conveyor belt to transport and deliver the particles/cells towards the gap. At the gap, the diverging light fields hold the particles at a fixed position. The proposed waveguide design is numerically studied and experimentally implemented. The optical forces on the particle at the gap are calculated using the finite element method. Experimentally, the method is used to transport and trap micro-particles and red blood cells at the gap with varying separations. The waveguides are only 180 nm thick and thus could be integrated with other functions on the chip, e.g. microfluidics or optical detection, to make an on-chip system for single cell analysis and to study the interaction between cells.

  16. Methodologies for Removing/Desorbing and Transporting Particles from Surfaces to Instrumentation

    Science.gov (United States)

    Miller, Carla J.; Cespedes, Ernesto R.

    2012-12-01

    Explosive trace detection (ETD) continues to be a key technology supporting the fight against terrorist bombing threats. Very selective and sensitive ETD instruments have been developed to detect explosive threats concealed on personnel, in vehicles, in luggage, and in cargo containers, as well as for forensic analysis (e.g. post blast inspection, bomb-maker identification, etc.) in a broad range of homeland security, law enforcement, and military applications. A number of recent studies have highlighted the fact that significant improvements in ETD systems' capabilities will be achieved, not by increasing the selectivity/sensitivity of the sensors, but by improved techniques for particle/vapor sampling, pre-concentration, and transport to the sensors. This review article represents a compilation of studies focused on characterizing the adhesive properties of explosive particles, the methodologies for removing/desorbing these particles from a range of surfaces, and approaches for transporting them to the instrument. The objectives of this review are to summarize fundamental work in explosive particle characterization, to describe experimental work performed in harvesting and transport of these particles, and to highlight those approaches that indicate high potential for improving ETD capabilities.

  17. Influence of near-surface blisters on deuterium transport in tungsten

    Science.gov (United States)

    Bauer, J.; Schwarz-Selinger, T.; Schmid, K.; Balden, M.; Manhard, A.; von Toussaint, U.

    2017-08-01

    The effect of near-surface blisters on deuterium transport in tungsten is studied by means of nuclear reaction analysis (NRA) and scanning electron microscopy (SEM). Gentle deuterium plasma loading of different durations and subsequent NRA depth profiling is performed in heavily pre-blistered and unblistered areas on self-damaged tungsten samples. Comparison of the deuterium depth profiles reveals a considerable reduction of the deuterium transport into the bulk due to the presence of near-surface blisters. SEM and NRA results identify the enhanced re-emission of deuterium from the sample due to open blisters as the underlying mechanism, which reduces the deuterium flux into the bulk. Based on a simple analytical hydrogen retention model, the re-emitted deuterium flux by open blisters is determined to be 80% of the implanted deuterium flux in the present conducted experiment. In addition, the deuterium flux into the bulk is reduced by 60% compared to the unblistered case. Hence the presence of blisters is not a general disadvantage in the context of retention, but can be beneficial in slowing down the build up of a certain hydrogen inventory and in reducing the permeation flux.

  18. Oceanic transport of surface meltwater from the southern Greenland ice sheet

    Science.gov (United States)

    Luo, Hao; Castelao, Renato M.; Rennermalm, Asa K.; Tedesco, Marco; Bracco, Annalisa; Yager, Patricia L.; Mote, Thomas L.

    2016-07-01

    The Greenland ice sheet has undergone accelerating mass losses during recent decades. Freshwater runoff from ice melt can influence fjord circulation and dynamics and the delivery of bioavailable micronutrients to the ocean. It can also have climate implications, because stratification in the adjacent Labrador Sea may influence deep convection and the strength of the Atlantic meridional overturning circulation. Yet, the fate of the meltwater in the ocean remains unclear. Here, we use a high-resolution ocean model to show that only 1-15% of the surface meltwater runoff originating from southwest Greenland is transported westwards. In contrast, up to 50-60% of the meltwater runoff originating from southeast Greenland is transported westwards into the northern Labrador Sea, leading to significant salinity and stratification anomalies far from the coast. Doubling meltwater runoff, as predicted in future climate scenarios, results in a more-than-double increase in anomalies offshore that persists further into the winter. Interannual variability in offshore export of meltwater is tightly related to variability in wind forcing. The new insight that meltwaters originating from the west and east coasts have different fates indicates that future changes in mass loss rates and surface runoff will probably impact the ocean differently, depending on their Greenland origins.

  19. ATP-binding cassette transporter controls leaf surface secretion of anticancer drug components in Catharanthus roseus.

    Science.gov (United States)

    Yu, Fang; De Luca, Vincenzo

    2013-09-24

    The Madagascar periwinkle (Catharanthus roseus) is highly specialized for the biosynthesis of many different monoterpenoid indole alkaloids (MIAs), many of which have powerful biological activities. Such MIAs include the commercially important chemotherapy drugs vinblastine, vincristine, and other synthetic derivatives that are derived from the coupling of catharanthine and vindoline. However, previous studies have shown that biosynthesis of these MIAs involves extensive movement of metabolites between specialized internal leaf cells and the leaf epidermis that require the involvement of unknown secretory processes for mobilizing catharanthine to the leaf surface and vindoline to internal leaf cells. Spatial separation of vindoline and catharanthine provides a clear explanation for the low levels of dimers that accumulate in intact plants. The present work describes the molecular cloning and functional identification of a unique catharanthine transporter (CrTPT2) that is expressed predominantly in the epidermis of young leaves. CrTPT2 gene expression is activated by treatment with catharanthine, and its in planta silencing redistributes catharanthine to increase the levels of catharanthine-vindoline drug dimers in the leaves. Phylogenetic analysis shows that CrTPT2 is closely related to a key transporter involved in cuticle assembly in plants and that may be unique to MIA-producing plant species, where it mediates secretion of alkaloids to the plant surface.

  20. Oceanic Transport of Surface Meltwater from the Southern Greenland Ice Sheet

    Science.gov (United States)

    Luo, Hao; Castelao, Renato M.; Rennermalm, Asa K.; Tedesco, Marco; Bracco, Annalisa; Yager, Patricia L.; Mote, Thomas L.

    2016-01-01

    The Greenland ice sheet has undergone accelerating mass losses during recent decades. Freshwater runoff from ice melt can influence fjord circulation and dynamic1 and the delivery of bioavailable micronutrients to the ocean. It can also have climate implications, because stratification in the adjacent Labrador Sea may influence deep convection and the strength of the Atlantic meridional overturning circulation. Yet, the fate of the meltwater in the ocean remains unclear. Here, we use a high-resolution ocean model to show that only 1-15% of the surface meltwater runoff originating from southwest Greenland is transported westwards. In contrast, up to 50-60% of the meltwater runoff originating from southeast Greenland is transported westwards into the northern Labrador Sea, leading to significant salinity and stratification anomalies far from the coast. Doubling meltwater runoff, as predicted in future climate scenarios, results in a more-than-double increase in anomalies offshore that persists further into the winter. Interannual variability in offshore export of meltwater is tightly related to variability in wind forcing. The new insight that meltwaters originating from the west and east coasts have different fates indicates that future changes in mass loss rates and surface runoff will probably impact the ocean differently, depending on their Greenland origins.

  1. Factors contributing to the off-target transport of pyrethroid insecticides from urban surfaces.

    Science.gov (United States)

    Jorgenson, Brant C; Wissel-Tyson, Christopher; Young, Thomas M

    2012-08-01

    Pyrethroid insecticides used in urban and suburban contexts have been found in urban creek sediments and associated with toxicity in aquatic bioassays. The objectives of this study were to evaluate the main factors contributing to the off-target transport of pyrethroid insecticides from surfaces typical of residential landscapes. Controlled rainfall simulations over concrete, bare soil, and turf plots treated individually with pyrethroid insecticides in a suspension concentrate, an emulsifiable concentrate, or a granule formulation were conducted at different rainfall intensities and different product set-time intervals. Pyrethroid mass washoff varied by several orders of magnitude between experimental treatments. Suspension concentrate product application to concrete yielded significantly greater washoff than any other treatment; granule product application to turf yielded the least washoff. Fractional losses at 10 L of runoff ranged from 25.9 to 0.011% of pyrethroid mass applied, and 10 L nominal mass losses ranged from 3970 to 0.18 μg. Mass washoff depended principally on formulation and surface type combination and, to a lesser degree, on set-time interval and rainfall intensity. Treatment effects were analyzed by ANOVA on main factors of formulation, surface type, and set time. Factor effects were not purely additive; a significant interaction between formulation and surface type was noted.

  2. Coupled Vadose Zone and Atmospheric Surface-Layer Transport of CO2 from Geologic Carbon Sequestration Sites

    Energy Technology Data Exchange (ETDEWEB)

    Oldenburg, Curtis M.; Unger, Andre J.A.

    2004-03-29

    Geologic carbon dioxide (CO{sub 2}) sequestration is being considered as a way to offset fossil-fuel-related CO{sub 2} emissions to reduce the rate of increase of atmospheric CO{sub 2} concentrations. The accumulation of vast quantities of injected carbon dioxide (CO{sub 2}) in geologic sequestration sites may entail health and environmental risks from potential leakage and seepage of CO{sub 2} into the near-surface environment. We are developing and applying a coupled subsurface and atmospheric surface-layer modeling capability built within the framework of the integral finite difference reservoir simulator TOUGH2. The overall purpose of modeling studies is to predict CO{sub 2} concentration distributions under a variety of seepage scenarios and geologic, hydrologic, and atmospheric conditions. These concentration distributions will provide the basis for determining above-ground and near-surface instrumentation needs for carbon sequestration monitoring and verification, as well as for assessing health, safety, and environmental risks. A key feature of CO{sub 2} is its large density ({rho} = 1.8 kg m{sup -3}) relative to air ({rho} = 1.2 kg m{sup -3}), a property that may allow small leaks to cause concentrations in air above the occupational exposure limit of 4 percent in low-lying and enclosed areas such as valleys and basements where dilution rates are low. The approach we take to coupled modeling involves development of T2CA, a TOUGH2 module for modeling the multicomponent transport of water, brine, CO{sub 2}, gas tracer, and air in the subsurface. For the atmospheric surface-layer advection and dispersion, we use a logarithmic vertical velocity profile to specify constant time-averaged ambient winds, and atmospheric dispersion approaches to model mixing due to eddies and turbulence. Initial simulations with the coupled model suggest that atmospheric dispersion quickly dilutes diffuse CO{sub 2} seepage fluxes to negligible concentrations, and that rainfall

  3. Applying GIS characterizing and modeling contaminant transport in surface water at Los Alamos National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Becker, N.M.; Van Eeckhout, E. [Los Alamos National Lab., NM (United States); David, N.A. [Environmental Res., Inst. of Michigan, Santa Fe, NM (United States); Irvine, J.M. [Environmental Res. Inst. of Michigan, Arlington, VA (United States)

    1995-10-01

    During World War II, Los Alamos, New Mexico was chosen as the site for the secret development of the first atomic bomb. The remote location in the southwestern United States was ideal for such a project. After the war, research activities continued at the Los Alamos installation, focusing on new nuclear weapons models as well as greater effectiveness and reliability of existing weapons. Due to the emphasis on nuclear and non-nuclear weapons development as well as associated nuclear research, a large inventory of radionuclides and heavy metals have been tested, expended, and disposed of in the local environment, a high plateau of tuffaceous volcanic rocks incised by deep canyons in a semi-arid climate. In recent years an intensive evaluation of the environmental, impact of weapons testing at Los Alamos and elsewhere has been undertaken. GIS system utilization and image processing of past and current data has been an important part of this evaluation. Important problems can be more easily displayed and understood using this methodology. The main objective in this paper is to illustrate how transport of depleted uranium and associated heavy metals (copper in this case) used in dynamic testing of weapons components at open air firing sites can be evaluated and visualized. In our studies, surface water has been found to be the predominant transport mechanism. We have sampled soils, sediments, fallout, runoff water and snowmelt over a number of years in order to understand contaminant transport on- and offsite. Statistical analyses of these data have assisted in our characterization of issues such as contaminant variability, spatially and temporally, as well as in development of transport rates.

  4. The Signature Sequence Region of the Human Drug Transporter Organic Anion Transporting Polypeptide 1B1 Is Important for Protein Surface Expression

    Directory of Open Access Journals (Sweden)

    Jennina Taylor-Wells

    2014-01-01

    Full Text Available The organic anion transporting polypeptides (OATPs encompass a family of membrane transport proteins responsible for the uptake of xenobiotic compounds. Human organic anion transporting polypeptide 1B1 (OATP1B1 mediates the uptake of clinically relevant compounds such as statins and chemotherapeutic agents into hepatocytes, playing an important role in drug delivery and detoxification. The OATPs have a putative 12-transmembrane domain topology and a highly conserved signature sequence (human OATP1B1: DSRWVGAWWLNFL, spanning the extracellular loop 3/TM6 boundary. The presence of three conserved tryptophan residues at the TM interface suggests a structural role for the sequence. This was investigated by site-directed mutagenesis of selected amino acids within the sequence D251E, W254F, W258/259F, and N261A. Transport was measured using the substrate estrone-3-sulfate and surface expression detected by luminometry and confocal microscopy, facilitated by an extracellular FLAG epitope. Uptake of estrone-3-sulfate and the surface expression of D251E, W254F, and W258/259F were both significantly reduced from the wild type OATP1B1-FLAG in transfected HEK293T cells. Confocal microscopy revealed that protein was produced but was retained intracellularly. The uptake and expression of N261A were not significantly different. The reduction in surface expression and intracellular protein retention indicates a structural and/or membrane localization role for these signature sequence residues in the human drug transporter OATP1B1.

  5. The Signature Sequence Region of the Human Drug Transporter Organic Anion Transporting Polypeptide 1B1 Is Important for Protein Surface Expression.

    Science.gov (United States)

    Taylor-Wells, Jennina; Meredith, David

    2014-01-01

    The organic anion transporting polypeptides (OATPs) encompass a family of membrane transport proteins responsible for the uptake of xenobiotic compounds. Human organic anion transporting polypeptide 1B1 (OATP1B1) mediates the uptake of clinically relevant compounds such as statins and chemotherapeutic agents into hepatocytes, playing an important role in drug delivery and detoxification. The OATPs have a putative 12-transmembrane domain topology and a highly conserved signature sequence (human OATP1B1: DSRWVGAWWLNFL), spanning the extracellular loop 3/TM6 boundary. The presence of three conserved tryptophan residues at the TM interface suggests a structural role for the sequence. This was investigated by site-directed mutagenesis of selected amino acids within the sequence D251E, W254F, W258/259F, and N261A. Transport was measured using the substrate estrone-3-sulfate and surface expression detected by luminometry and confocal microscopy, facilitated by an extracellular FLAG epitope. Uptake of estrone-3-sulfate and the surface expression of D251E, W254F, and W258/259F were both significantly reduced from the wild type OATP1B1-FLAG in transfected HEK293T cells. Confocal microscopy revealed that protein was produced but was retained intracellularly. The uptake and expression of N261A were not significantly different. The reduction in surface expression and intracellular protein retention indicates a structural and/or membrane localization role for these signature sequence residues in the human drug transporter OATP1B1.

  6. Improving the design of higher-capacity railway tank cars for hazardous materials transport: optimizing the trade-off between weight and safety.

    Science.gov (United States)

    Barkan, Christopher P L

    2008-12-15

    As with many aspects of modern industrial society, decision-makers face trade-offs in considering hazardous materials transportation equipment and practices. Tank cars used for transport of hazardous materials can be made more resistant to damage in accidents through use of a thicker steel tank and other protective features. However, the additional weight of these features reduces the car's capacity and thus its efficiency as a transportation vehicle. In this paper the problem of tank car safety versus weight is developed as a multi-attribute decision problem. North American railroads recently developed specifications for higher capacity tank cars for transportation of hazardous materials including enhanced safety design features. A group of tank car safety design features or "risk reduction options" (RROs) were analyzed with regard to their effect on the conditional probability of release in an accident, and their incremental effect on tank car weight. All possible combinations of these RROs were then analyzed in terms of the reduced release probability per unit of weight increase and the Pareto optimal set of options identified. This set included the combinations of RROs that provided the greatest improvement in safety with the least amount of additional weight for any desired level of tank car weight increase. The analysis was conducted for both non-insulated and insulated tank cars and used two objective functions, minimization of conditional probability of release, and minimization of expected quantity lost, given that a car was derailed in an accident. Sensitivity analyses of the effect of tank car size and use of different objective functions were conducted and the optimality results were found to be robust. The results of this analysis were used by the Association of American Railroads Tank Car Committee to develop new specifications for higher capacity non-insulated and insulated, non-pressure tank cars resulting in an estimated 32% and 24% respective

  7. 试论公路线形组合对交通安全的影响%On the Influence of Highway Linear Combination on Transportation Safety

    Institute of Scientific and Technical Information of China (English)

    刘锋

    2015-01-01

    In recent years, with the guidance of the national transportation industry policy, the traffic mileage of various regions is showing a high growth momentum, at the same time, people pay more attention to the highway traffic safety situation. At this present, the most important things of the highway traffic safety are improving the level of the highway traffic safety and reducing the accident rate. In the highway traffic system, the transportation safety is eminently influenced and restricted by the factors of the road, especially the linear combination of highway, it directly influences the highway traffic safety situation.%近年来,在国家交通运输产业政策的引导下,各地公路通车里程都呈现出较高的增长态势,与此同时公路交通的安全状况也逐步引起了人们更多的关注。当前,提高公路交通安全水平,降低事故率成为公路交通安全的首要问题。在公路交通系统中,交通安全受“路”因素的影响和制约较突出,尤其是公路的线形组合,直接影响着公路交通的安全状况。

  8. No-Loss Transportation of Water Droplets by Patterning a Desired Hydrophobic Path on a Superhydrophobic Surface.

    Science.gov (United States)

    Hu, Haibao; Yu, Sixiao; Song, Dong

    2016-07-26

    The directional transportation of droplets on solid surfaces is essential in a wide range of engineering applications. It is convenient to guide liquid droplets in a given direction by utilizing the gradient of wettability, by which the binding forces can be produced. In contrast to the mass-loss transportation of a droplet moving along hydrophilic paths on a horizontal superhydrophobic surface, we present no-loss transportation by fabricating a hydrophobic path on the same surface under tangential wind. In experimental exploration and theoretical analysis, the conditions of no-loss transportation of a droplet are mainly considered. We demonstrate that the lower (or upper) critical wind velocity, under which the droplet starts on the path (or is derailed from the path), is determined by the width of the path, the length of the contact area in the direction parallel to the path, the drift angle between the path and the wind direction, and the surface wettability of the pattern. Meanwhile, the no-loss transportation of water droplets along the desired path zigzagging on a superhydrophobic surface can be achieved steadily under appropriate conditions. We anticipate that such robust no-loss transportation will find an extensive range of applications.

  9. A Study of Transport and Impact Strength of Fukushima Nuclear Pollutants in the North Pacific Surface

    Institute of Scientific and Technical Information of China (English)

    FU Hongli; LI Wei; ZHANG Xuefeng; HAN Guijun; WANG Xidong; WU Xinrong; ZHANG Lianxin

    2014-01-01

    Based on the statistics of surface drifter data of 1979-2011 and the simulation of nuclear pollutant particulate move-ments simulated using high quality ocean reanalysis surface current dataset, the transport pathways and impact strength of Fuku-shima nuclear pollutants in the North Pacific have been estimated. The particulates are used to increase the sampling size and en-hance the representativeness of statistical results. The trajectories of the drifters and particulates are first examined to identify typical drifting pathways. The results show that there are three types of transport paths for nuclear pollutants at the surface: 1) most pollutant particles move eastward and are carried by the Kuroshio and Kuroshio-extension currents and reach the east side of the North Pacific after about 3.2-3.9 years;2) some particles travel with the subtropical circulation branch and reach the east coast of China after about 1.6 years according to one drifter trajectory and about 3.6 years according to particulate trajectories;3) a little of them travel with local, small scale circulations and reach the east coast of China after about 1.3-1.8 years. Based on the par-ticulates, the impact strength of nuclear pollutants at these time scales can be estimated according to the temporal variations of relative concentration combined with the radioactive decay rate. For example, Cesium-137, carried by the strong North Pacific current, mainly accumulates in the eastern North Pacific and its impact strength is 4%of the initial level at the originating Fuku-shima area after 4 years. Due to local eddies, Cesium-137 in the western North Pacific is 1%of the initial pollutant level after 1.5 years and continuously increases to 3%after 4 years. The vertical movement of radioactive pollutants is not taken into account in the present study, and the estimation accuracy would be improved by considering three-dimensional flows.

  10. Transport and fate of nitrate at the ground-water/surface-water interface

    Science.gov (United States)

    Puckett, L.J.; Zamora, C.; Essaid, H.; Wilson, J.T.; Johnson, H.M.; Brayton, M.J.; Vogel, J.R.

    2008-01-01

    Although numerous studies of hyporheic exchange and denitrification have been conducted in pristine, high-gradient streams, few studies of this type have been conducted in nutrient-rich, low-gradient streams. This is a particularly important subject given the interest in nitrogen (N) inputs to the Gulf of Mexico and other eutrophic aquatic systems. A combination of hydrologic, mineralogical, chemical, dissolved gas, and isotopic data, were used to determine the processes controlling transport and fate of NO3- in streambeds at five sites across the USA. Water samples were collected from streambeds at depths ranging from 0.3 to 3 m at three to five points across the stream and in two to five separate transects. Residence times of water ranging from 0.28 to 34.7 d m-1 in the streambeds of N-rich watersheds played an important role in allowing denitrification to decrease NO3- concentrations. Where potential electron donors were limited and residence times were short, denitrification was limited. Consequently, in spite of reducing conditions at some sites, NO3- was transported into the stream. At two of the five study sites, NO3- in surface water infiltrated the streambeds and concentrations decreased, supporting current models that NO3- would be retained in N-rich streams. At the other three study sites, hydrogeologic controls limited or prevented infiltration of surface water into the streambed, and ground-water discharge contributed to NO 3- loads. Our results also show that in these low hydrologic-gradient systems, storm and other high-flow events can be important factors for increasing surface-water movement into streambeds. Copyright ?? 2008 by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America. All rights reserved.

  11. Surface runoff from manured cropping systems assessed by the paired-watershed method, part 1: P, N, and sediment transport

    Science.gov (United States)

    Transport of P, N, and sediment via runoff from crop fields can contribute to degradation of surface waters. We established a paired-watershed study in central Wisconsin to evaluate surface runoff losses of nutrients, sediment, and pathogens from different manure/crop/tillage management systems for ...

  12. High resolution imaging of vadose zone transport using surface and crosswell ground penetrating radar methods

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Kenneth H.; Kowalsky, Mike B.; Peterson, John E.

    2002-11-05

    To effectively clean up many contaminated sites there is a need for information on heterogeneities at scales ranging from one centimeter to tens of meters, as these features can alter contaminant transport significantly. At the Department of Energy's Hanford, Washington site heterogeneities of interest can range from localized phenomena such as silt or gravel lenses, fractures, clastic dikes, to large-scale lithologic discontinuities. In the vadose zone it is critical to understand the parameters controlling flow. These features have been suspected of leading to funneling and fingering, additional physical mechanisms that could alter and possibly accelerate the transport of contaminants to underlying groundwater. For example, it has been observed from the studies to date that over relatively short distances there are heterogeneities in the physical structure of the porous medium and structural differences between repacked soil cores and the field site from which the materials initially came (Raymond and Shdo, 1966). Analysis of cores taken from the vadose zone (i.e., soil surface to water table) has been useful in identifying localized zones of contamination. Unfortunately, these analyses are sparse (limited to a few boreholes) and extremely expensive. The high levels of radioactivity at many of the contaminated sites increase drilling and sample costs and analysis time. Cost of drilling and core analysis for the SX tank farm has exceeded $1M per borehole (50 meter deep) for sampling. The inability to track highly mobile species through the vadose zone highlights an important need: the need for methods to describe the complete vadose zone plume and to determine processes controlling accelerated contamination of groundwater at Hanford. A combination of surface and crosswell (i.e. borehole) geophysical measurements is one means to provide this information. The main questions addressed with the radar methods in this study are: (1) What parts of the vadose zone

  13. Features, events, processes, and safety factor analysis applied to a near-surface low-level radioactive waste disposal facility

    Energy Technology Data Exchange (ETDEWEB)

    Stephens, M.E.; Dolinar, G.M.; Lange, B.A. [Atomic Energy of Canada Limited, Ontario (Canada)] [and others

    1995-12-31

    An analysis of features, events, processes (FEPs) and other safety factors was applied to AECL`s proposed IRUS (Intrusion Resistant Underground Structure) near-surface LLRW disposal facility. The FEP analysis process which had been developed for and applied to high-level and transuranic disposal concepts was adapted for application to a low-level facility for which significant efforts in developing a safety case had already been made. The starting point for this process was a series of meetings of the project team to identify and briefly describe FEPs or safety factors which they thought should be considered. At this early stage participants were specifically asked not to screen ideas. This initial list was supplemented by selecting FEPs documented in other programs and comments received from an initial regulatory review. The entire list was then sorted by topic and common issues were grouped, and issues were classified in three priority categories and assigned to individuals for resolution. In this paper, the issue identification and resolution process will be described, from the initial description of an issue to its resolution and inclusion in the various levels of the safety case documentation.

  14. Thinking on Coal Mine Tire Vehicle Transportation Safety%煤矿胶轮车运输安全的思考

    Institute of Scientific and Technical Information of China (English)

    唐淑芳; 邱上进

    2015-01-01

    Simply describes the basic situation of coal transport and auxiliary transport, mainly analyzes the no three main reasons of rubber tyre vehicle transport easily occurred in the production process of the accident, detail of the rubber tyred vehicle transportation safety supervision work of“person, vehicle, road”the four key elements.%叙述了煤矿运输及辅助运输基本情况,主要分析了无轨胶轮车运输在生产过程中容易发生事故的3个主要原因,详细阐述了胶轮车运输安全监管工作中的人、车、路、法4个关键要素。

  15. Onsager heat of transport of carbon dioxide at the surface of aqueous ammonia: The remarkable effect of carbamate formation

    Science.gov (United States)

    Packwood, Daniel M.; Phillips, Leon F.

    2010-11-01

    The Onsager heat of transport Q∗ has been measured for CO 2 at the surface of aqueous ammonia. The heat of transport incorporates the enthalpy of reaction of gaseous CO 2 with ammonia, adsorbed on the liquid surface, to form adsorbed ammonium carbamate, with the result that -Q∗ has the unusually large value of 180 kJ mol -1. Measurement of Q∗ for transfer of a reactive species through a surfactant monolayer is proposed as a new method of studying reactions at liquid and quasi-liquid surfaces.

  16. Surface-modified silica colloidal crystals: nanoporous films and membranes with controlled ionic and molecular transport.

    Science.gov (United States)

    Zharov, Ilya; Khabibullin, Amir

    2014-02-18

    Nanoporous membranes are important for the study of the transport of small molecules and macromolecules through confined spaces and in applications ranging from separation of biomacromolecules and pharmaceuticals to sensing and controlled release of drugs. For many of these applications, chemists need to gate the ionic and molecular flux through the nanopores, which in turn depends on the ability to control the nanopore geometry and surface chemistry. Most commonly used nanoporous membrane materials are based on polymers. However, the nanostructure of polymeric membranes is not well-defined, and their surface is hard to modify. Inorganic nanoporous materials are attractive alternatives for polymers in the preparation of nanoporous membranes. In this Account, we describe the preparation and surface modification of inorganic nanoporous films and membranes self-assembled from silica colloidal spheres. These spheres form colloidal crystals with close-packed face centered cubic lattices upon vertical deposition from colloidal solutions. Silica colloidal crystals contain ordered arrays of interconnected three dimensional voids, which function as nanopores. We can prepare silica colloidal crystals as supported thin films on various flat solid surfaces or obtain free-standing silica colloidal membranes by sintering the colloidal crystals above 1000 °C. Unmodified silica colloidal membranes are capable of size-selective separation of macromolecules, and we can surface-modify them in a well-defined and controlled manner with small molecules and polymers. For the surface modification with small molecules, we use silanol chemistry. We grow polymer brushes with narrow molecular weight distribution and controlled length on the colloidal nanopore surface using atom transfer radical polymerization or ring-opening polymerization. We can control the flux in the resulting surface-modified nanoporous films and membranes by pH and ionic strength, temperature, light, and small molecule

  17. Transport rectification in nanopores with outer membranes modified with surface charges and polyelectrolytes.

    Science.gov (United States)

    Tagliazucchi, Mario; Rabin, Yitzhak; Szleifer, Igal

    2013-10-22

    This work reports a comprehensive theoretical study of the transport-rectification properties of cylindrical nanopores with neutral inner walls and chemically modified outer membrane. The chemical species on the two outer sides of the membrane have charges of opposite sign and can be either surface-confined species (i.e., surface charges) or polyelectrolyte brushes. The advantage of this design over other types of rectifying nanopores is that it requires controlling the composition of the outer walls of the pore (which are easy to access) rather than the inner walls, thus simplifying the fabrication process. Ion-current rectification in nanopores with charged outer walls is ascribed to applied-potential-induced changes in the ionic concentration within the pore. The rectification efficiency is studied as a function of pore length, radius, surface charge and bulk electrolyte concentration. An analytical model is derived for the case of surface-confined charges that predicts the current-potential curves in very good agreement with the numerical calculations. Neutral nanopores with polyelectrolyte-modified outer walls have two distinct advantages compared to surface-charged systems: (i) they exhibit higher rectification factors due to the large charge density immobilized by the polyelectrolyte brushes, and (ii) the applied potential deforms the polyelectrolyte chains toward the oppositely charged electrode. This deformation brings the polyelectrolyte brushes into the pore in the low conductivity state and expels them from the pore in the high conductivity regime. Calculations of the potentials of mean-force suggest that the applied-field-induced conformational changes can be used to control the translocation of cargoes larger than ions, such as proteins and nanoparticles.

  18. Modeling Groundwater-Surface Water Interaction and Contaminant Transport of Chlorinated Solvent Contaminated Site

    Science.gov (United States)

    Yimer Ebrahim, Girma; Jonoski, Andreja; van Griensven, Ann; Dujardin, Juliette; Baetelaan, Okke; Bronders, Jan

    2010-05-01

    Chlorinated-solvent form one of the largest groups of environmental chemicals. Their use and misuse in industry have lead to a large entry of these chemicals into the environment, resulting in widespread dissemination and oftentimes environmental contamination. Chlorinated solvent contamination of groundwater resources has been widely reported. For instance, there has been much interest in the assessment of these contaminant levels and their evolutions with time in the groundwater body below the Vilvoorde-Machelen industrial area (Belgium). The long industrial history of the area has lead to complex patterns of pollution from multiple sources and the site has been polluted to the extent that individual plumes are not definable any more. Understanding of groundwater/surface water interaction is a critical component for determining the fate of contaminant both in streams and ground water due to the fact that groundwater and surface water are in continuous dynamic interaction in the hydrologic cycle. The interaction has practical consequences in the quantity and quality of water in either system in the sense that depletion and/or contamination of one of the system will eventually affect the other one. The transition zone between a stream and its adjacent aquifer referred to as the hyporheic zone plays a critical role in governing contaminant exchange and transformation during water exchange between the two water bodies. The hyporheic zone of Zenne River ( the main receptor ) is further complicated due to the fact that the river banks are artificially trained with sheet piles along its reach extending some 12 m below the surface. This study demonstrates the use of MODFLOW, a widely used modular three-dimensional block-centred finite difference, saturated flow model for simulating the flow and direction of movement of groundwater through aquifer and stream-aquifer interaction and the use of transport model RT3D, a three-dimensional multi-species reactive transport model

  19. Mass Transport in Surface Diffusion of van der Waals Bonded Systems: Boosted by Rotations?

    Science.gov (United States)

    Hedgeland, Holly; Sacchi, Marco; Singh, Pratap; McIntosh, Andrew J; Jardine, Andrew P; Alexandrowicz, Gil; Ward, David J; Jenkins, Stephen J; Allison, William; Ellis, John

    2016-12-01

    Mass transport at a surface is a key factor in heterogeneous catalysis. The rate is determined by excitation across a translational barrier and depends on the energy landscape and the coupling to the thermal bath of the surface. Here we use helium spin-echo spectroscopy to track the microscopic motion of benzene adsorbed on Cu(001) at low coverage (θ ∼ 0.07 ML). Specifically, our combined experimental and computational data determine both the absolute rate and mechanism of the molecular motion. The observed rate is significantly higher by a factor of 3.0 ± 0.1 than is possible in a conventional, point-particle model and can be understood only by including additional molecular (rotational) coordinates. We argue that the effect can be described as an entropic contribution that enhances the population of molecules in the transition state. The process is generally relevant to molecular systems and illustrates the importance of the pre-exponential factor alongside the activation barrier in studies of surface kinetics.

  20. Orf virus interferes with MHC class I surface expression by targeting vesicular transport and Golgi

    Directory of Open Access Journals (Sweden)

    Rohde Jörg

    2012-07-01

    Full Text Available Abstract Background The Orf virus (ORFV, a zoonotic Parapoxvirus, causes pustular skin lesions in small ruminants (goat and sheep. Intriguingly, ORFV can repeatedly infect its host, despite the induction of a specific immunity. These immune modulating and immune evading properties are still unexplained. Results Here, we describe that ORFV infection of permissive cells impairs the intracellular transport of MHC class I molecules (MHC I as a result of structural disruption and fragmentation of the Golgi apparatus. Depending on the duration of infection, we observed a pronounced co-localization of MHC I and COP-I vesicular structures as well as a reduction of MHC I surface expression of up to 50%. These subversion processes are associated with early ORFV gene expression and are accompanied by disturbed carbohydrate trimming of post-ER MHC I. The MHC I population remaining on the cell surface shows an extended half-life, an effect that might be partially controlled also by late ORFV genes. Conclusions The presented data demonstrate that ORFV down-regulates MHC I surface expression in infected cells by targeting the late vesicular export machinery and the structure and function of the Golgi apparatus, which might aid to escape cellular immune recognition.

  1. Surface-to-mountaintop transport characterised by radon observations at the Jungfraujoch

    Directory of Open Access Journals (Sweden)

    A. D. Griffiths

    2014-07-01

    Full Text Available Atmospheric composition measurements at Jungfraujoch are affected intermittently by thermally-driven (anabatic mountain winds as well as by other vertical transport mechanisms. Using radon-222 observations, and a new analysis method, we quantify the land surface influence hour-by-hour and detect the presence of anabatic winds on a daily basis. During 2010–2011, anabatic winds occurred on roughly 40% of days, but only from April–September. Anabatic wind days were associated with warmer air temperatures over a large fraction of Europe and with a shift in airmass properties. Shifts were evident even when comparing the same radon concentrations, a proxy for land-surface influence. Aerosol washout, when quantified as a function of rain-rate using a radon normalisation technique, was also influenced by anabatic winds being more pronounced on non-anabatic days. Excluding the influence of anabatic winds, however, did not lead to a better definition of the unperturbed aerosol background than a definition based on radon alone, supporting the use of a radon threshold to identify periods with weak land-surface influence.

  2. Formulation effects and the off-target transport of pyrethroid insecticides from urban hard surfaces.

    Science.gov (United States)

    Jorgenson, Brant C; Young, Thomas M

    2010-07-01

    Controlled rainfall experiments utilizing drop-forming rainfall simulators were conducted to study various factors contributing to off-target transport of off-the-shelf formulated pyrethroid insecticides from concrete surfaces. Factors evaluated included active ingredient, product formulation, time between application and rainfall (set time), and rainfall intensity. As much as 60% and as little as 0.8% of pyrethroid applied could be recovered in surface runoff depending primarily on product formulation, and to a lesser extent on product set time. Resulting wash-off profiles during one-hour storm simulations could be categorized based on formulation, with formulations utilizing emulsifying surfactants rather than organic solvents resulting in unique wash-off profiles with overall higher wash-off efficiency. These higher wash-off efficiency profiles were qualitatively replicated by applying formulation-free neat pyrethroid in the presence of independently applied linear alkyl benzene sulfonate (LAS) surfactant, suggesting that the surfactant component of some formulated products may be influential in pyrethroid wash-off from urban hard surfaces.

  3. Maritime transport safety enhancement

    Energy Technology Data Exchange (ETDEWEB)

    Samuelides, Manolis [National Technical University of Athens (Greece); University School of Naval Architecture and Marine Engineering, Zografos (Greece). Div. for Marine Structures

    2013-11-15

    As the density of sea traffic keeps growing, designing ship structures capable of withstanding accidental loads such as collisions or grounding without detrimental consequences proves an ever-greater challenge. Double hull designs play a major role in this respect, as explains Manolis Samuelides, Professor at the National Technical University of Athens. (orig.)

  4. Cuban experience in verification of the execution of the safety requirements during the transport of radioactive materials; Experiencia cubana en verificacion del cumplimento de los requerimientos de seguridad durante el transporte de materiales radiactivos

    Energy Technology Data Exchange (ETDEWEB)

    Quevedo Garcia, J.R.; Lopez Forteza, Y. [Centro Nacional de Seguridad Nuclear, La Habana (Cuba)

    2001-07-01

    The Cuban Regulatory Authority has paid special attention to the verification of the execution of the safety requirements during the transport of radioactive material in the country. With this purpose, the Authority has followed a consequent policy based on supplementary demands to those collections in the juridical mark settled down in 1987 in the sphere of transport of radioactive substances. In the work the technical approaches are exposed kept in mind when establishing the one referred politics, the current situation is characterized, the results are evaluated obtained in correspondence with the pursued objectives and the essential aspects are exposed to keep in mind for the adopted politics ulterior development. (author)

  5. Transport and scavenging of Pu in surface waters of the Southern Hemisphere Oceans

    DEFF Research Database (Denmark)

    Gastaud, J.; Povinec, P.P.; Aoyama, M.

    2011-01-01

    The distribution of 239Pu in Atlantic and Indian Ocean waters about four decades after their main injection from atmospheric nuclear weapons tests is discussed. Recent data obtained in the framework of the SHOTS (Southern Hemisphere Ocean Tracer Studies) projects are evaluated and compared...... with previous investigations. Seawater samples were collected during the round the globe BEAGLE2003 (Blue Ocean Global Expedition) along the 30°S transect in the Atlantic and the 20°S transect in the Indian Ocean. The results indicate transport of surface waters labelled with 239Pu from the western North...... Pacific via the Indonesian Seas to the South Indian Ocean and then to the South Atlantic Ocean. Along the whole BEAGLE2003 sampling route, the Atlantic Ocean has the lowest 239Pu content due to its particle scavenging on the long way from the western North Pacific. On the other hand, concentrations...

  6. Using Contaminant Transport Modeling to Determine Historical Discharges at the Surface

    Science.gov (United States)

    Fogwell, T. W.

    2013-12-01

    When it is determined that a contaminated site needs to be remediated, the issue of who is going to pay for that remediation is an immediate concern. This means that there needs to be a determination of who the responsible parties are for the existing contamination. Seldom is it the case that records have been made and kept of the surface contaminant discharges. In many cases it is possible to determine the relative amount of contaminant discharge at the surface of the various responsible parties by employing a careful analysis of the history of contaminant transport through the surface, through the vadose zone, and within the saturated zone. The process begins with the development of a dynamic conceptual site model that takes into account the important features of the transport of the contaminants through the vadose zone and in the groundwater. The parameters for this model can be derived from flow data available for the site. The resulting contaminant transport model is a composite of the vadose zone transport model, together with the saturated zone (groundwater) flow model. Any calibration of the model should be carefully employed in order to avoid using information about the conclusions of the relative discharge amounts of the responsible parties in determining the calibrated parameters. Determination of the leading edge of the plume is an important first step. It is associated with the first discharges from the surface of the site. If there were several discharging parties at the same time, then it is important to establish a chemical or isotopic signature of the chemicals that were discharged. The time duration of the first discharger needs to be determined as accurately as possible in order to establish the appropriate characterization of the leading portion of the resulting plume in the groundwater. The information about the first discharger and the resulting part of the plume associated with this discharger serves as a basis for the determination of the

  7. Can Surface Flux Transport Account for the Weak Polar Field in Cycle 23?

    Science.gov (United States)

    Jiang, Jie; Cameron, Robert H.; Schmitt, Dieter; Schüssler, Manfred

    2013-06-01

    To reproduce the weak magnetic field on the polar caps of the Sun observed during the declining phase of cycle 23 poses a challenge to surface flux transport models since this cycle has not been particularly weak. We use a well-calibrated model to evaluate the parameter changes required to obtain simulated polar fields and open flux that are consistent with the observations. We find that the low polar field of cycle 23 could be reproduced by an increase of the meridional flow by 55% in the last cycle. Alternatively, a decrease of the mean tilt angle of sunspot groups by 28% would also lead to a similarly low polar field, but cause a delay of the polar field reversals by 1.5 years in comparison to the observations.

  8. Can surface flux transport account for the weak polar field in cycle 23?

    CERN Document Server

    Jiang, Jie; Schmitt, Dieter; Schuessler, Manfred

    2011-01-01

    To reproduce the weak magnetic field on the polar caps of the Sun observed during the declining phase of cycle 23 poses a challenge to surface flux transport models since this cycle has not been particularly weak. We use a well-calibrated model to evaluate the parameter changes required to obtain simulated polar fields and open flux that are consistent with the observations. We find that the low polar field of cycle 23 could be reproduced by an increase of the meridional flow by 55% in the last cycle. Alternatively, a decrease of the mean tilt angle of sunspot groups by 28% would also lead to a similarly low polar field, but cause a delay of the polar field reversals by 1.5 years in comparison to the observations.

  9. Simulation of soluble waste transport and buildup in surface waters using tracers

    Science.gov (United States)

    Kilpatrick, F.A.

    1993-01-01

    Soluble tracers can be used to simulate the transport and dispersion of soluble wastes that might have been introduced or are planned for introduction into surface waters. Measured tracer-response curves produced from the injection of a known quantity of soluble tracer can be used in conjunction with the superposition principle to simulate potential waste buildup in streams, lakes, and estuaries. Such information is particularly valuable to environmental and water-resource planners in determining the effects of proposed waste discharges. The theory, techniques, analysis, and presentation of results of tracer-waste simulation tests in rivers, lakes, and estuaries are described. This manual builds on other manuals dealing with dye tracing by emphasizing the expanded use of data from time-of-travel studies.

  10. Safety of Sodium-Glucose Co-Transporter 2 Inhibitors during Ramadan Fasting: Evidence, Perceptions and Guidelines

    Directory of Open Access Journals (Sweden)

    Salem A. Beshyah

    2016-06-01

    Full Text Available Sodium-glucose co-transporter 2 (SGLT2 inhibitors are a new glucose-lowering therapy for T2DM with documented benefits on blood glucose, hypertension, weight reduction and long term cardiovascular benefit. They have an inherent osmotic diuretic effect and lead to some volume loss and possible dehydration. There is some concern about the safety of using SGLT2 inhibitors in Muslim type 2 diabetes mellitus (T2DM patients during the fast during Ramadan. Currently, there is a dearth of research data to help guide physicians and reassure patients.  One study confirmed good glycemic control with less risk of hypoglycemia and no marked volume depletion. Data in the elderly and in combination with diuretics are reassuring of their safe to use in Ramadan in general. SGLT2 inhibitor-related diabetic ketoacidosis has not been reported during Ramadan and is unlikely to be relevant. Survey of physicians revealed that the majority felt that SGLT2 inhibitors are generally safe in T2DM patients during Ramadan fasting but should be discontinued in certain high risk patients. Some professional groups with interest in diabetes and Ramadan fasting included SGLT2 inhibitors in their guidelines on management of diabetes during Ramadan. They acknowledged the lack of trial data, recommended caution in high risk groups, advised regular monitoring and emphasized pre-Ramadan patients’ education. In conclusion, currently, knowledge, data and experience with SGLT2 inhibitors in Ramadan are limited. Nonetheless, stable patients with normal kidney function and low risk of dehydration may safely use the SGLT2 inhibitors therapy. Higher risk patients should be observed carefully and managed on individual basis.

  11. From the surface to the seafloor: How giant larvaceans transport microplastics into the deep sea.

    Science.gov (United States)

    Katija, Kakani; Choy, C Anela; Sherlock, Rob E; Sherman, Alana D; Robison, Bruce H

    2017-08-01

    Plastic waste is a pervasive feature of marine environments, yet little is empirically known about the biological and physical processes that transport plastics through marine ecosystems. To address this need, we conducted in situ feeding studies of microplastic particles (10 to 600 μm in diameter) with the giant larvacean Bathochordaeus stygius. Larvaceans are abundant components of global zooplankton assemblages, regularly build mucus "houses" to filter particulate matter from the surrounding water, and later abandon these structures when clogged. By conducting in situ feeding experiments with remotely operated vehicles, we show that giant larvaceans are able to filter a range of microplastic particles from the water column, ingest, and then package microplastics into their fecal pellets. Microplastics also readily affix to their houses, which have been shown to sink quickly to the seafloor and deliver pulses of carbon to benthic ecosystems. Thus, giant larvaceans can contribute to the vertical flux of microplastics through the rapid sinking of fecal pellets and discarded houses. Larvaceans, and potentially other abundant pelagic filter feeders, may thus comprise a novel biological transport mechanism delivering microplastics from surface waters, through the water column, and to the seafloor. Our findings necessitate the development of tools and sampling methodologies to quantify concentrations and identify environmental microplastics throughout the water column.

  12. Surface Flux Transport and the Evolution of the Sun's Polar Fields

    Science.gov (United States)

    Wang, Y.-M.

    2017-09-01

    The evolution of the polar fields occupies a central place in flux transport (Babcock-Leighton) models of the solar cycle. We discuss the relationship between surface flux transport and polar field evolution, focusing on two main issues: the latitudinal profile of the meridional flow and the axial tilts of active regions. Recent helioseismic observations indicate that the poleward flow speed peaks at much lower latitudes than inferred from magnetic feature tracking, which includes the effect of supergranular diffusion and thus does not represent the actual bulk flow. Employing idealized simulations, we demonstrate that flow profiles that peak at mid latitudes give rise to overly strong and concentrated polar fields. We discuss the differences between magnetic and white-light measurements of tilt angles, noting the large uncertainties inherent in the sunspot group measurements and their tendency to underestimate the actual tilts. We find no clear evidence for systematic cycle-to-cycle variations in Joy's law during cycles 21-23. Finally, based on the observed evolution of the Sun's axial dipole component and polar fields up to the end of 2015, we predict that cycle 25 will be similar in amplitude to cycle 24.

  13. Nuclear Criticality Safety of the DOT 9975 Container for237NpO2Storage, Handling, and Transport

    Energy Technology Data Exchange (ETDEWEB)

    Reed, D.A.

    2003-08-29

    Nuclear criticality safety considerations are presented to address use of the DOT 9975 shipping container for {sup 237}NpO{sub 2}. The DOT 9975 container will be used by multiple DOE sites and contractors. Various of site- and activity-specific NCS and facility safety documents are yet to be developed. For these reasons, an overall assessment of criticality safety of {sup 237}NpO{sub 2}-loaded DOT 9975 containers is considered useful to personnel involved in generating, reviewing, or approving these various documents. It is concluded that inherent container features, the loading per container (maximum of 6 kg {sup 237}Np), and the nuclear physics properties of {sup 237}NpO{sub 2} combine to preclude the potential for a nuclear criticality accident. This conclusion applies to storage, handling, and transport operations involving closed DOT 9975 packages, including credible off-normal conditions that may result in damage to packages during those operations.

  14. Transport and retention of phosphorus in surface water in an urban slum area

    Science.gov (United States)

    Nyenje, P. M.; Meijer, L. M. G.; Foppen, J. W.; Kulabako, R.; Uhlenbrook, S.

    2013-08-01

    The transport of excessive phosphorus (P) discharged from unsewered informal settlements (slums) due to poor on-site sanitation is largely unknown. Hence, we investigated the processes governing P transport in a 28 km2 slum-dominated catchment in Kampala, Uganda. During high runoff events and a period of base flow, we collected hourly water samples (over 24 h) from a primary channel draining the catchment and from a small size tertiary channel draining one of the contributing slum areas (0.5 km2). Samples were analyzed for orthophosphate (PO4-P), particulate P (PP), total P (TP) and selected hydro-chemical parameters. Channel bed and suspended sediments were collected to determine their sorption potential, geo-available metals and dominant P forms. We found that P inputs in the catchment originated mainly from domestic wastewater as evidenced by high concentrations of Cl (36-144 mg L-1), HCO3 and other cations in the channels. Most P discharged during low flow conditions was particulate implying that much of it was retained in bed sediments. Retained P was mostly bound to Ca and Fe/Al oxides. Hence, we inferred that mineral precipitation and adsorption to Ca-minerals were the dominant P retention processes. Bed sediments were P-saturated and showed a tendency to release P to discharging waters. P released was likely due to Ca-bound P because of the strong correlation between Ca and total P in sediments (r2 = 0.9). High flows exhibited a strong flush of PP and SS implying that part of P retained was frequently flushed out of the catchment by surface erosion and resuspension of bed sediment. Our findings suggest that P accumulated in the channel bed during low flows and then was slowly released into surface water. Hence, it will likely take some time, even with improved wastewater management practices, before P loads to downstream areas can be significantly reduced.

  15. Transport and retention of phosphorus in surface water in an urban slum area

    Directory of Open Access Journals (Sweden)

    P. M. Nyenje

    2013-08-01

    Full Text Available The transport of excessive phosphorus (P discharged from unsewered informal settlements (slums due to poor on-site sanitation is largely unknown. Hence, we investigated the processes governing P transport in a 28 km2 slum-dominated catchment in Kampala, Uganda. During high runoff events and a period of base flow, we collected hourly water samples (over 24 h from a primary channel draining the catchment and from a small size tertiary channel draining one of the contributing slum areas (0.5 km2. Samples were analyzed for orthophosphate (PO4-P, particulate P (PP, total P (TP and selected hydro-chemical parameters. Channel bed and suspended sediments were collected to determine their sorption potential, geo-available metals and dominant P forms. We found that P inputs in the catchment originated mainly from domestic wastewater as evidenced by high concentrations of Cl (36–144 mg L-1, HCO3 and other cations in the channels. Most P discharged during low flow conditions was particulate implying that much of it was retained in bed sediments. Retained P was mostly bound to Ca and Fe/Al oxides. Hence, we inferred that mineral precipitation and adsorption to Ca-minerals were the dominant P retention processes. Bed sediments were P-saturated and showed a tendency to release P to discharging waters. P released was likely due to Ca-bound P because of the strong correlation between Ca and total P in sediments (r2 = 0.9. High flows exhibited a strong flush of PP and SS implying that part of P retained was frequently flushed out of the catchment by surface erosion and resuspension of bed sediment. Our findings suggest that P accumulated in the channel bed during low flows and then was slowly released into surface water. Hence, it will likely take some time, even with improved wastewater management practices, before P loads to downstream areas can be significantly reduced.

  16. Cell surface receptors for signal transduction and ligand transport: a design principles study.

    Directory of Open Access Journals (Sweden)

    Harish Shankaran

    2007-06-01

    Full Text Available Receptors constitute the interface of cells to their external environment. These molecules bind specific ligands involved in multiple processes, such as signal transduction and nutrient transport. Although a variety of cell surface receptors undergo endocytosis, the systems-level design principles that govern the evolution of receptor trafficking dynamics are far from fully understood. We have constructed a generalized mathematical model of receptor-ligand binding and internalization to understand how receptor internalization dynamics encodes receptor function and regulation. A given signaling or transport receptor system represents a particular implementation of this module with a specific set of kinetic parameters. Parametric analysis of the response of receptor systems to ligand inputs reveals that receptor systems can be characterized as being: i avidity-controlled where the response control depends primarily on the extracellular ligand capture efficiency, ii consumption-controlled where the ability to internalize surface-bound ligand is the primary control parameter, and iii dual-sensitivity where both the avidity and consumption parameters are important. We show that the transferrin and low-density lipoprotein receptors are avidity-controlled, the vitellogenin receptor is consumption-controlled, and the epidermal growth factor receptor is a dual-sensitivity receptor. Significantly, we show that ligand-induced endocytosis is a mechanism to enhance the accuracy of signaling receptors rather than merely serving to attenuate signaling. Our analysis reveals that the location of a receptor system in the avidity-consumption parameter space can be used to understand both its function and its regulation.

  17. Effects of noradrenaline on the cell-surface glucose transporters in cultured brown adipocytes: novel mechanism for selective activation of GLUT1 glucose transporters.

    Science.gov (United States)

    Shimizu, Y; Satoh, S; Yano, H; Minokoshi, Y; Cushman, S W; Shimazu, T

    1998-01-01

    Glucose transport into rat brown adipocytes has been shown to be stimulated directly by the sympathetic neurotransmitter, noradrenaline, without a significant increase in the protein content of either GLUT1 or GLUT4 glucose transporter in the plasma membrane [Shimizu, Kielar, Minokoshi and Shimazu (1996) Biochem. J. 314, 485-490]. In the present study, we labelled the exofacial glucose-binding sites of GLUT1 and GLUT4 with a membrane-impermeant photoaffinity reagent, 2-N-[4-(1-azitrifluoroethyl)benzoyl]-[2-3H]1,3-bis- (D-mannos-4-yloxy)-2-propylamine (ATB-[3H]BMPA), to determine which isoform is responsible for the noradrenaline-induced increase in glucose transport into intact brown adipocytes in culture. Insulin stimulated the rate of hexose transport by increasing ATB-[3H]BMPA-labelled cell-surface GLUT4. In contrast, the noradrenaline-induced increase in glucose transport was not accompanied by an increased ATB-[3H]BMPA labelling of GLUT4, nor with an increased amount of GLUT4 in the plasma membrane fraction as assessed by Western blotting, indicating that noradrenaline does not promote the translocation of GLUT4. However, noradrenaline induced an increase in photoaffinity labelling of cell-surface GLUT1 without an apparent increase in the immunoreactive GLUT1 protein in the plasma membrane. This is suggestive of an increased affinity of GLUT1 for the ligand. In fact, the Ki value of non-radioactive ATB-BMPA for 2-deoxy-D-glucose uptake was significantly decreased after treatment of the cells with noradrenaline. The increased photoaffinity labelling of GLUT1 and increased glucose transport caused by noradrenaline were inhibited by a cAMP antagonist, cAMP-S Rp-isomer. These results demonstrate that noradrenaline stimulates glucose transport in brown adipocytes by enhancing the functional activity of GLUT1 through a cAMP-dependent mechanism. PMID:9461536

  18. Conceptual and numerical modelling of radionuclide transport in near-surface systems at Forsmark. SR-Site Biosphere

    Energy Technology Data Exchange (ETDEWEB)

    Pique, Angels; Grandia, Fidel; Sena, Clara; Arcos, David; Molinero, Jorge; Duro, Lara; Bruno, Jordi (Amphos21 Consulting S.L., Barcelona (Spain))

    2010-11-15

    In the framework of the SR-Site safety assessment, a conceptual and numerical modelling of radionuclide reactive transport in near-surface systems (including till and clay systems) at Forsmark has been carried out. The objective was to evaluate the retention capacity of the near-surface systems, composed of Quaternary deposits, which would be the last natural barrier for an eventual radionuclide release from the deep repository prior to reaching the biosphere. The studied radionuclides are 14C, 129I, 36Cl, 94Nb, 59Ni, 93Mo, 79Se, 99Tc, 230Th, 90Sr, 226Ra, 135Cs and U. Conceptual description and numerical simulations of radionuclide reactive transport show that cation exchange and surface complexation on illite are active processes for the retention of several radionuclides (U, Th, Ni, Cs, Sr, Ra). Surface complexation on iron hydroxide is an active process in the till system, able to effectively retain U and Ni. Another retention process of importance is the incorporation of the radionuclides into mineral phases, either by the precipitation of pure phases or solid solutions. Quantitative modelling has been useful to illustrate the incorporation of C and Sr in the carbonate solid solution in the considered model domains (till and clay), as well as the precipitation of uraninite in the clay sediments and the precipitation of native selenium and radiobarite in the till. Other mineral phases that could, a priori, retain U, Se, Nb and Tc do not precipitate in the simulations, either due to the pH-Eh conditions and/or because the dissolved concentration of the element is not high enough under the considered simulation conditions. It is important to keep in mind that changes in these parameters and in the boundary conditions could modify the predicted behaviour of these elements. The radionuclides that are most significantly retarded are Th, Ni and Cs, mainly through sorption onto illite. Therefore, if the amount of illite (or available sorption sites) decreases, the

  19. Criticality Safety Scoping Study for the Transport of Weapons-Grade Mixed-Oxide Fuel Using the MO-1 Shipping Package

    Energy Technology Data Exchange (ETDEWEB)

    Dunn, M.E.; Fox, P.B.

    1999-05-01

    This report provides the criticality safety information needed for obtaining certification of the shipment of mixed-oxide (MOX) fuel using the MO-1 [USA/9069/B()F] shipping package. Specifically, this report addresses the shipment of non-weapons-grade MOX fuel as certified under Certificate of Compliance 9069, Revision 10. The report further addresses the shipment of weapons-grade MOX fuel using a possible Westinghouse fuel design. Criticality safety analysis information is provided to demonstrate that the requirements of 10 CFR S 71.55 and 71.59 are satisfied for the MO-1 package. Using NUREG/CR-5661 as a guide, a transport index (TI) for criticality control is determined for the shipment of non-weapons-grade MOX fuel as specified in Certificate of Compliance 9069, Revision 10. A TI for criticality control is also determined for the shipment of weapons-grade MOX fuel. Since the possible weapons-grade fuel design is preliminary in nature, this report is considered to be a scoping evaluation and is not intended as a substitute for the final criticality safety analysis of the MO-1 shipping package. However, the criticality safety evaluation information that is presented in this report does demonstrate the feasibility of obtaining certification for the transport of weapons-grade MOX lead test fuel using the MO-1 shipping package.

  20. Ozone-surface interactions: Investigations of mechanisms, kinetics, mass transport, and implications for indoor air quality

    Energy Technology Data Exchange (ETDEWEB)

    Morrison, Glenn Charles [Univ. of California, Berkeley, CA (United States)

    1999-12-01

    In this dissertation, results are presented of laboratory investigations and mathematical modeling efforts designed to better understand the interactions of ozone with surfaces. In the laboratory, carpet and duct materials were exposed to ozone and measured ozone uptake kinetics and the ozone induced emissions of volatile organic compounds. To understand the results of the experiments, mathematical methods were developed to describe dynamic indoor aldehyde concentrations, mass transport of reactive species to smooth surfaces, the equivalent reaction probability of whole carpet due to the surface reactivity of fibers and carpet backing, and ozone aging of surfaces. Carpets, separated carpet fibers, and separated carpet backing all tended to release aldehydes when exposed to ozone. Secondary emissions were mostly n-nonanal and several other smaller aldehydes. The pattern of emissions suggested that vegetable oils may be precursors for these oxidized emissions. Several possible precursors and experiments in which linseed and tung oils were tested for their secondary emission potential were discussed. Dynamic emission rates of 2-nonenal from a residential carpet may indicate that intermediate species in the oxidation of conjugated olefins can significantly delay aldehyde emissions and act as reservoir for these compounds. The ozone induced emission rate of 2-nonenal, a very odorous compound, can result in odorous indoor concentrations for several years. Surface ozone reactivity is a key parameter in determining the flux of ozone to a surface, is parameterized by the reaction probability, which is simply the probability that an ozone molecule will be irreversibly consumed when it strikes a surface. In laboratory studies of two residential and two commercial carpets, the ozone reaction probability for carpet fibers, carpet backing and the equivalent reaction probability for whole carpet were determined. Typically reaction probability values for these materials were 10

  1. Ozone-surface interactions: Investigations of mechanisms, kinetics, mass transport, and implications for indoor air quality

    Energy Technology Data Exchange (ETDEWEB)

    Morrison, Glenn C.

    1999-12-01

    In this dissertation, results are presented of laboratory investigations and mathematical modeling efforts designed to better understand the interactions of ozone with surfaces. In the laboratory, carpet and duct materials were exposed to ozone and measured ozone uptake kinetics and the ozone induced emissions of volatile organic compounds. To understand the results of the experiments, mathematical methods were developed to describe dynamic indoor aldehyde concentrations, mass transport of reactive species to smooth surfaces, the equivalent reaction probability of whole carpet due to the surface reactivity of fibers and carpet backing, and ozone aging of surfaces. Carpets, separated carpet fibers, and separated carpet backing all tended to release aldehydes when exposed to ozone. Secondary emissions were mostly n-nonanal and several other smaller aldehydes. The pattern of emissions suggested that vegetable oils may be precursors for these oxidized emissions. Several possible precursors and experiments in which linseed and tung oils were tested for their secondary emission potential were discussed. Dynamic emission rates of 2-nonenal from a residential carpet may indicate that intermediate species in the oxidation of conjugated olefins can significantly delay aldehyde emissions and act as reservoir for these compounds. The ozone induced emission rate of 2-nonenal, a very odorous compound, can result in odorous indoor concentrations for several years. Surface ozone reactivity is a key parameter in determining the flux of ozone to a surface, is parameterized by the reaction probability, which is simply the probability that an ozone molecule will be irreversibly consumed when it strikes a surface. In laboratory studies of two residential and two commercial carpets, the ozone reaction probability for carpet fibers, carpet backing and the equivalent reaction probability for whole carpet were determined. Typically reaction probability values for these materials were 10

  2. Theoretical investigation of the electronic structure and quantum transport in the graphene-C(111) diamond surface system.

    Science.gov (United States)

    Selli, Daniele; Baburin, Igor; Leoni, Stefano; Zhu, Zhen; Tománek, David; Seifert, Gotthard

    2013-10-30

    We investigate the interaction of a graphene monolayer with the C(111) diamond surface using ab initio density functional theory. To accommodate the lattice mismatch between graphene and diamond, the overlayer deforms into a wavy structure that binds strongly to the diamond substrate. The detached ridges of the wavy graphene overlayer behave electronically as free-standing polyacetylene chains with delocalized π electrons, separated by regions containing only sp(3) carbon atoms covalently bonded to the (111) diamond surface. We performed quantum transport calculations for different geometries of the system to study how the buckling of the graphene layer and the associated bonding to the diamond substrate affect the transport properties. The system displays high carrier mobility along the ridges and a wide transport gap in the direction normal to the ridges. These intriguing, strongly anisotropic transport properties qualify the hybrid graphene-diamond system as a viable candidate for electronic nanodevices.

  3. A model for the biosynthesis and transport of plasma membrane-associated signaling receptors to the cell surface

    Directory of Open Access Journals (Sweden)

    Sorina Claudia Popescu

    2012-04-01

    Full Text Available Intracellular protein transport is emerging as critical in determining the outcome of receptor-activated signal transduction pathways. In plants, relatively little is known about the nature of the molecular components and mechanisms involved in coordinating receptor synthesis and transport to the cell surface. Recent advances in this field indicate that signaling pathways and intracellular transport machinery converge and coordinate to render receptors competent for signaling at their plasma membrane activity sites. The biogenesis and transport to the cell surface of signaling receptors appears to require both general trafficking and receptor-specific factors. Several molecular determinants, residing or associated with compartments of the secretory pathway and known to influence aspects in receptor biogenesis, are discussed and integrated into a predictive cooperative model for the functional expression of signaling receptors at the plasma membrane.

  4. Transport of Dirac fermions on the surface of strong topological insulator and graphene

    Energy Technology Data Exchange (ETDEWEB)

    Kundu, Arijit

    2012-06-14

    In this dissertation I study electronic transport through Dirac Fermions on the surface of strong topological insulator and graphene. I start by reviewing the physics of topological insulator and graphene and the low energy effective theory for the electronic states of the surface of a 3D strong topological insulator and graphene. Using this theory the electronic structure of the surface states of strong topological insulators of geometries with large surface to bulk ratio like nanowire and thin film are obtained. Then the energy spectrum and the spin-parity structure of the eigenstates for a finite size topological insulator quantum dot of the shape of a nanotube are considered. Numerical calculations show that even at the lowest energy scales, the ''spin-surface locking'' is broken, that is, the spin direction in a topologically protected surface mode is not locked to the surface. The calculations also show the existence of ''zero-momentum'' modes, and sub-gap states localized near the ''caps'' of the dot. Both the energy spectrum and the spin texture of the eigenstates are basically reproduced from an analytical surface Dirac fermion description. The results are compared to microscopic calculations using a tight-binding model for a strong topological insulator in a finite-length nanowire geometry, which shows qualitative similarity. Then, a theoretical study of electron-phonon scattering effects in thin films made of a strong topological insulator is presented. Phonons are modeled by isotropic elastic continuum theory with stress-free boundary conditions, and the interaction with the helical surface Dirac fermions is mediated by the deformation potential. The temperature-dependent electrical resistivity ρ(T) and the quasi-particle decay rate Γ(T) observable in photo-emission are computed numerically. The low and high-temperature power laws for both quantities are obtained analytically. Detailed

  5. Spatio-Temporal Modelling of Dust Transport over Surface Mining Areas and Neighbouring Residential Zones

    Directory of Open Access Journals (Sweden)

    Eva Gulikova

    2008-06-01

    Full Text Available Projects focusing on spatio-temporal modelling of the living environment need to manage a wide range of terrain measurements, existing spatial data, time series, results of spatial analysis and inputs/outputs from numerical simulations. Thus, GISs are often used to manage data from remote sensors, to provide advanced spatial analysis and to integrate numerical models. In order to demonstrate the integration of spatial data, time series and methods in the framework of the GIS, we present a case study focused on the modelling of dust transport over a surface coal mining area, exploring spatial data from 3D laser scanners, GPS measurements, aerial images, time series of meteorological observations, inputs/outputs form numerical models and existing geographic resources. To achieve this, digital terrain models, layers including GPS thematic mapping, and scenes with simulation of wind flows are created to visualize and interpret coal dust transport over the mine area and a neighbouring residential zone. A temporary coal storage and sorting site, located near the residential zone, is one of the dominant sources of emissions. Using numerical simulations, the possible effects of wind flows are observed over the surface, modified by natural objects and man-made obstacles. The coal dust drifts with the wind in the direction of the residential zone and is partially deposited in this area. The simultaneous display of the digital map layers together with the location of the dominant emission source, wind flows and protected areas enables a risk assessment of the dust deposition in the area of interest to be performed. In order to obtain a more accurate simulation of wind flows over the temporary storage and sorting site, 3D laser scanning and GPS thematic mapping are used to create a more detailed digital terrain model. Thus, visualization of wind flows over the area of interest combined with 3D map layers enables the exploration of the processes of coal dust

  6. Mechanisms of nanoparticle internalization and transport across an intestinal epithelial cell model: effect of size and surface charge.

    Science.gov (United States)

    Bannunah, Azzah M; Vllasaliu, Driton; Lord, Jennie; Stolnik, Snjezana

    2014-12-01

    This study investigated the effect of nanoparticle size (50 and 100 nm) and surface charge on their interaction with Caco-2 monolayers as a model of the intestinal epithelium, including cell internalization pathways and the level of transepithelial transport. Initially, toxicity assays showed that cell viability and cell membrane integrity were dependent on the surface charge and applied mass, number, and total surface area of nanoparticles, as tested in two epithelial cell lines, colon carcinoma Caco-2 and airway Calu-3. This also identified suitable nanoparticle concentrations for subsequent cell uptake experiments. Nanoparticle application at doses below half maximal effective concentration (EC₅₀) revealed that the transport efficiency (ratio of transport to cell uptake) across Caco-2 cell monolayers is significantly higher for negatively charged nanoparticles compared to their positively charged counterparts (of similar size), despite the higher level of internalization of positively charged systems. Cell internalization pathways were hence probed using a panel of pharmacological inhibitors aiming to establish whether the discrepancy in transport efficiency is due to different uptake and transport pathways. Vesicular trans-monolayer transport for both positively and negatively charged nanoparticles was confirmed via inhibition of dynamin (by dynasore) and microtubule network (via nocodazole), which significantly reduced the transport of both nanoparticle systems. For positively charged nanoparticles a significant decrease in internalization and transport (46% and 37%, respectively) occurred in the presence of a clathrin pathway inhibitor (chlorpromazine), macropinocytosis inhibition (42%; achieved by 5-(N-ethyl-N-isopropyi)-amiloride), and under cholesterol depletion (38%; via methyl-β-cyclodextrin), but remained unaffected by the inhibition of lipid raft associated uptake (caveolae) by genistein. On the contrary, the most prominent reduction in

  7. Transportation Institute dedicates new research building

    OpenAIRE

    Box, Sherri

    2006-01-01

    Today, with The Honorable John Warner as the keynote speaker, the Virginia Tech Transportation Institute (VTTI) dedicated its new 22,000 square-foot building in Blacksburg as the National Surface Transportation Safety Center for Excellence (STSCE). University administrators as well as other local and state officials also attended.

  8. Thermal transport study across interface “nanostructured solid surface / fluid” by photoacoustic technique

    Science.gov (United States)

    Voitenko, K.; Isaiev, M.; Pastushenko, A.; Andrusenko, D.; Kuzmich, A.; Lysenko, V.; Burbelo, R.

    2017-01-01

    In the paper the experimental study of heat transport across the interface “porous silicon/liquid” by photoacoustic technique is reported. Two cases with and without liquid covering of porous silicon surface were considered. Thermal perturbations were excited at the surface of porous silicon as a result of absorption of the light with modulated intensity. The resulting thermal-elastic stresses arising in the system were registered with piezoelectric transducer. The amplitude-frequency dependencies of the voltage on the piezoelectric electrodes were measured. The presence of the liquid film leads to decreasing of the amplitude of photoacoustic signal as a result of the thermal energy evacuation from the porous silicon into the liquid. The experimental dependencies were fitted with the results of simulation that takes into account heat fluxes separation at the porous silicon/liquid interface. With the presented method one can precisely measure heat fluxes transferred from the solid into contacting fluid. Moreover, the presented approach can be easily adopted for the thermal conductivity study of the different nanofluids as well as thermal resistance at the interface nanostructured solid/fluid.

  9. Surface States Transport in Topological Insulator Bi_{0.83}Sb_{0.17} Nanowires

    Science.gov (United States)

    Konopko, L. A.; Nikolaeva, A. A.; Huber, T. E.; Ansermet, J.-P.

    2016-12-01

    We investigate the transport properties of topological insulator (TI) Bi_{0.83}Sb_{0.17} nanowires. Single-crystal nanowire samples with diameters ranging from 75 nm to 1.1 μ m are prepared using high frequency liquid phase casting in a glass capillary; cylindrical single crystals with (10bar{1}1) orientation along the wire axis are produced. Bi_{0.83}Sb_{0.17} is a narrow-gap semiconductor with an energy gap at the L point of the Brillouin zone, Δ E = 21 meV. The resistance of the samples increases with decreasing temperature, but a decrease in resistance is observed at low temperatures. This effect is a clear manifestation of TI properties (i.e., the presence of a highly conducting zone on the TI surface). When the diameter of the nanowire decreases, the energy gap Δ E grows as 1 / d (for diameter d = 1.1 μ m and d =75 nm Δ E = 21 and 45 meV, respectively), which proves the presence of the quantum size effect in these samples. We investigate the magnetoresistance of Bi_{0.83}Sb_{0.17} nanowires at various magnetic field orientations. Shubnikov-de Haas oscillations are observed in Bi_{0.83}Sb_{0.17} nanowires at T = 1.5 K, demonstrating the existence of high mobility (μ_S = 26{,}700-47{,}000 cm^2V^{-1}s^{-1}) two-dimensional (2D) carriers in the surface areas of the nanowires, which are nearly perpendicular to the C_3 axis. From the linear dependence of the nanowire conductance on nanowire diameter at T = 4.2 K, the square resistance R_sq of the surface states of the nanowires is obtained (R_sq =70 Ohm).

  10. Phonon transport in silicon nanowires: The reduced group velocity and surface-roughness scattering

    Science.gov (United States)

    Zhu, Liyan; Li, Baowen; Li, Wu

    2016-09-01

    Using a linear-scaling Kubo simulation approach, we have quantitatively investigated the effects of confinement and surface roughness on phonon transport in silicon nanowires (SiNWs) as thick as 55 nm in diameter R . The confinement effect leads to significant reduction of phonon group velocity v in SiNWs compared to bulk silicon except at extremely low phonon frequencies f , which very likely persists in SiNWs several hundreds of nanometers thick, suggesting the inapplicability of bulk properties, including anharmonic phonon scattering, to SiNWs. For instance, the velocity can be reduced by more than 30% for phonons with f >4.5 THz in 55-nm-thick nanowires. In rough SiNWs Casimir's limit, which is valid in confined macroscopic systems, can underestimate the surface scattering by more than one order of magnitude. For a roughness profile with Lorentzian correlation characterized by root-mean-square roughness σ and correlation length Lr, the frequency-dependent phonon diffusivity D follows power-law dependences D ∝Rασ-βLrγ , where α ˜2 and β ˜1 . On average, γ increases from 0 to 0.5 as R /σ increases. The mean free path and the phonon lifetime essentially follow the same power-law dependences. These dependences are in striking contrast to Casimir's limit, i.e., D ˜v R /3 , and manifest the dominant role of the change in the number of atoms due to roughness. The thermal conductivity κ can vary by one order of magnitude with varying σ and Lr in SiNWs, and increasing σ and shortening Lr can efficiently lower κ below Casimir's limit by one order of magnitude. Our work provides different insights to understand the ultralow thermal conductivity of SiNWs reported experimentally and guidance to manipulate κ via surface roughness engineering.

  11. Systems Safety and Engineering Division

    Data.gov (United States)

    Federal Laboratory Consortium — Volpe's Systems Safety and Engineering Division conducts engineering, research, and analysis to improve transportation safety, capacity, and resiliency. We provide...

  12. Surface-Water to Groundwater Transport of Pharmaceuticals in a Wastewater-Impacted Stream in the U.S.

    Science.gov (United States)

    Bradley, P. M.; Barber, L. B.; Duris, J. W.; Foreman, W. T.; Furlong, E. T.; Hubbard, L. E.; Hutchinson, K. J.; Keefe, S. H.; Kolpin, D. W.

    2014-12-01

    Wastewater pharmaceutical contamination of shallow groundwater is a substantial concern in effluent-dominated streams, due to aqueous mobility and designed bioactivity of pharmaceuticals and due to effluent-driven hydraulic gradients. Improved understanding of the environmental fate and transport of wastewater-derived pharmaceuticals is essential for effective protection of vital aquatic ecosystem services, environmental health, and drinking-water supplies. Substantial longitudinal (downstream) transport of pharmaceutical contaminants has been documented in effluent-impacted streams. The comparative lack of information on vertical and lateral transport (infiltration) of wastewater contaminants from surface-water to hyporheic and shallow groundwater compartments is a critical scientific data gap, given the potential for contamination of groundwater supplies in effluent-impacted systems. Growing dependencies on bank filtration and artificial recharge applications for release of wastewater to the environment and for pretreatment of poor-quality surface-water for drinking water emphasize the critical need to better understand the exchange of wastewater contaminants, like pharmaceuticals, between surface-water and groundwater compartments. The potential transport of effluent-derived pharmaceutical contaminants from surface-water to hyporheic-water and shallow groundwater compartments was examined in a wastewater-treatment-facility (WWTF) impacted stream in Ankeny, Iowa under effluent-dominated (71-99% of downstream flow) conditions. Strong hydraulic gradients and hydrologic connectivity were evident between surface-water and shallow-groundwater compartments in the vicinity of the WWTF outfall. Carbamazepine, sulfamethoxazole, and immunologically-related compounds were detected in groundwater 10-20 meters from the stream bank. Direct aqueous-injection HPLC-MS/MS revealed high percentage detections of pharmaceuticals (110 total analytes) in surface-water and groundwater

  13. Safety evaluation for packaging for the transport of K Basin sludge samples in the PAS-1 cask

    Energy Technology Data Exchange (ETDEWEB)

    SMITH, R.J.

    1998-11-17

    This safety evaluation for packaging authorizes the shipment of up to two 4-L sludge samples to and from the 325 Lab or 222-S Lab for characterization. The safety of this shipment is based on the current U.S. Department of Energy Certification of Compliance (CoC) for the PAS-1 cask, USA/9184/B(U) (DOE).

  14. 谈公路交通安全保障技术%On safety guarantee technique of road transportation

    Institute of Scientific and Technical Information of China (English)

    杨杰; 温佳宇

    2016-01-01

    Combining with the new tendency of the road construction,the paper analyzes the factors for the traffic accidents from people,vehicle and automobiles in the aspect of the raod traffic accidents,and points out the traffic safety guarantee measures from the road safety design,traffic safety evaluation and road traffic safety improvement,so as to ensure the road traffic safety in China.%结合公路建设新形势,从公路交通事故形态入手,通过对人、车、道路等方面交通事故诱因分析,从公路安全设计、交通安全评价和道路交通安全改善三个方面提出了交通安全保障措施,以保证我国公路交通安全。

  15. Safety assessment on the human intrusion scenarios of near surface disposal facility for low and very low level radioactive waste

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Sung Wook; Park, Jin Baek [Korea Radioactive Waste Agency, Daejeon (Korea, Republic of); Park, Sang Ho [Chungnam National University, Daejeon (Korea, Republic of)

    2016-03-15

    The second-stage near surface disposal facility for low and very low level radioactive waste's permanent disposal is to be built. During the institutional control period, the inadvertent intrusion of the general public is limited. But after the institutional control period, the access to the general public is not restricted. Therefore human who has purpose of residence and resource exploration can intrude the disposal facility. In this case, radioactive effects to the intruder should be limited within regulatory dose limits. This study conducted the safety assessment of human intrusion on the second-stage surface disposal facility through drilling and post drilling scenario. Results of drilling and post drilling scenario were satisfied with regulatory dose limits. The result showed that post-drilling scenario was more significant than drilling scenario. According to the human intrusion time and behavior after the closure of the facility, dominant radionuclide contributing to the intruder was different. Sensitivity analyses on the parameters about the human behavior were also satisfied with regulatory dose limits. Especially, manual redistribution factor was the most sensitive parameter on exposure dose. A loading plan of spent filter waste and dry active waste was more effective than a loading plan of spent filter waste and other wastes for the radiological point of view. These results can be expected to provide both robustness and defense in depth for the development of safety case further.

  16. Application of divided convective-dispersive transport model to simulate conservative transport processes in planted horizontal sub-surface flow constructed wetlands.

    Science.gov (United States)

    Dittrich, Ernő; Klincsik, Mihály

    2015-11-01

    We have created a divided convective-dispersive transport (D-CDT) model that can be used to provide an accurate simulation of conservative transport processes in planted horizontal sub-surface flow constructed wetlands filled with coarse gravel (HSFCW-C). This model makes a fitted response curve from the sum of two independent CDT curves, which show the contributions of the main and side streams. The analytical solutions of both CDT curves are inverse Gaussian distribution functions. We used Fréchet distribution to provide a fast optimization mathematical procedure. As a result of our detailed analysis, we concluded that the most important role in the fast upward part of the tracer response curve is played by the main stream, with high porous velocity and dispersion. This gives the first inverse Gaussian distribution function. The side stream shows slower transport processes in the micro-porous system, and this shows the impact of back-mixing and dead zones, too. The significance of this new model is that it can simulate transport processes in this kind of systems more accurately than the conventionally used convective-dispersive transport (CDT) model. The calculated velocity and dispersion coefficients with the D-CDT model gave differences of 24-54% (of velocity) and 22-308% (of dispersion coeff.) from the conventional CDT model, and were closer to actual hydraulic behaviour.

  17. Influence of surface wettability on transport mechanisms governing water droplet evaporation.

    Science.gov (United States)

    Pan, Zhenhai; Weibel, Justin A; Garimella, Suresh V

    2014-08-19

    Prediction and manipulation of the evaporation of small droplets is a fundamental problem with importance in a variety of microfluidic, microfabrication, and biomedical applications. A vapor-diffusion-based model has been widely employed to predict the interfacial evaporation rate; however, its scope of applicability is limited due to incorporation of a number of simplifying assumptions of the physical behavior. Two key transport mechanisms besides vapor diffusion-evaporative cooling and natural convection in the surrounding gas-are investigated here as a function of the substrate wettability using an augmented droplet evaporation model. Three regimes are distinguished by the instantaneous contact angle (CA). In Regime I (CA ≲ 60°), the flat droplet shape results in a small thermal resistance between the liquid-vapor interface and substrate, which mitigates the effect of evaporative cooling; upward gas-phase natural convection enhances evaporation. In Regime II (60 ≲ CA ≲ 90°), evaporative cooling at the interface suppresses evaporation with increasing contact angle and counterbalances the gas-phase convection enhancement. Because effects of the evaporative cooling and gas-phase convection mechanisms largely neutralize each other, the vapor-diffusion-based model can predict the overall evaporation rates in this regime. In Regime III (CA ≳ 90°), evaporative cooling suppresses the evaporation rate significantly and reverses entirely the direction of natural convection induced by vapor concentration gradients in the gas phase. Delineation of these counteracting mechanisms reconciles previous debate (founded on single-surface experiments or models that consider only a subset of the governing transport mechanisms) regarding the applicability of the classic vapor-diffusion model. The vapor diffusion-based model cannot predict the local evaporation flux along the interface for high contact angle (CA ≥ 90°) when evaporative cooling is strong and the

  18. Contributions of regional and intercontinental transport to surface ozone in Tokyo

    Science.gov (United States)

    Yoshitomi, M.; Wild, O.; Akimoto, H.

    2011-04-01

    Japan lies downwind of the Asian continent and for much of the year air quality is directly influenced by emissions of ozone precursors over these heavily-populated and rapidly-industrializing regions. This study examines the extent to which oxidant transport from regional and distant anthropogenic sources influences air quality in Japan in springtime, when these contributions are largest. We find that European and North American contributions to surface ozone over Japan in spring are persistent, averaging 3.5±1.1 ppb and 2.8±0.5 ppb respectively, and are greatest in cold continental outflow conditions following the passage of cold fronts. Contributions from China are larger, 4.0±2.8 ppb, and more variable, as expected for a closer source region, and are generally highest near cold fronts preceding the influence of more distant sources. The stratosphere provides a varying but ever-present background of ozone of about 11.2±2.5 ppb during spring. Local sources over Japan and Korea have a relatively small impact on mean ozone, 2.4±7.6 ppb, but this masks a strong diurnal signal, and local sources clearly dominate during episodes of high daytime ozone. By examining the meteorological mechanisms that favour transport from different source regions, we demonstrate that while maximum foreign influence generally does not occur at the same time as the greatest buildup of oxidants from local sources, it retains a significant influence under these conditions. It is thus clear that while meteorological boundaries provide some protection from foreign influence during oxidant outbreaks in Tokyo, these distant sources still make a substantial contribution to exceedance of the Japanese ozone air quality standard in springtime.

  19. Contributions of regional and intercontinental transport to surface ozone in the Tokyo area

    Science.gov (United States)

    Yoshitomi, M.; Wild, O.; Akimoto, H.

    2011-08-01

    Japan lies downwind of the Asian continent and for much of the year air quality is directly influenced by emissions of ozone precursors over these heavily-populated and rapidly-industrializing regions. This study examines the extent to which oxidant transport from regional and distant anthropogenic sources influences air quality in Japan in springtime, when these contributions are largest. We find that European and North American contributions to surface ozone over Japan in spring are persistent, averaging 3.5±1.1 ppb and 2.8±0.5 ppb respectively, and are greatest in cold continental outflow conditions following the passage of cold fronts. Contributions from China are larger, 4.0±2.8 ppb, and more variable, as expected for a closer source region, and are generally highest near cold fronts preceding the influence of more distant sources. The stratosphere provides a varying but ever-present background of ozone of about 11.2±2.5 ppb during spring. Local sources over Japan and Korea have a relatively small impact on mean ozone, 2.4±7.6 ppb, but this masks a strong diurnal signal, and local sources clearly dominate during episodes of high daytime ozone. By examining the meteorological mechanisms that favour transport from different source regions, we demonstrate that while maximum foreign influence generally does not occur at the same time as the greatest buildup of oxidants from local sources, it retains a significant influence under these conditions. It is thus clear that while meteorological boundaries provide some protection from foreign influence during oxidant outbreaks in Tokyo, these distant sources still make a substantial contribution to exceedance of the Japanese ozone air quality standard in springtime.

  20. Comparison of the MACCS2 atmospheric transport model with Lagrangian puff models as applied to deterministic and probabilistic safety analysis.

    Science.gov (United States)

    Till, John E; Rood, Arthur S; Garzon, Caroline D; Lagdon, Richard H

    2014-09-01

    The suitability of a new facility in terms of potential impacts from routine and accidental releases is typically evaluated using conservative models and assumptions to assure dose standards are not exceeded. However, overly conservative dose estimates that exceed target doses can result in unnecessary and costly facility design changes. This paper examines one such case involving the U.S. Department of Energy's pretreatment facility of the Waste Treatment and Immobilization Plant (WTP). The MELCOR Accident Consequence Code System Version 2 (MACCS2) was run using conservative parameter values in prescribed guidance to demonstrate that the dose from a postulated airborne release would not exceed the guideline dose of 0.25 Sv. External review of default model parameters identified the deposition velocity of 1.0 cm s as being non-conservative. The deposition velocity calculated using resistance models was in the range of 0.1 to 0.3 cm s-1. A value of 0.1 cm s-1 would result in the dose guideline being exceeded. To test the overall conservatism of the MACCS2 transport model, the 95th percentile hourly average dispersion factor based on one year of meteorological data was compared to dispersion factors generated from two state-of-the-art Lagrangian puff models. The 95th percentile dispersion factor from MACCS2 was a factor of 3 to 6 higher compared to those of the Lagrangian puff models at a distance of 9.3 km and a deposition velocity of 0.1 cm s-1. Thus, the inherent conservatism in MACCS2 more than compensated for the high deposition velocity used in the assessment. Applications of models like MACCS2 with a conservative set of parameters are essentially screening calculations, and failure to meet dose criteria should not trigger facility design changes but prompt a more in-depth analysis using probabilistic methods with a defined margin of safety in the target dose. A sample application of the probabilistic approach is provided.

  1. Nanofeatured Titanium Surfaces for Dental Implantology: Biological Effects, Biocompatibility, and Safety

    National Research Council Canada - National Science Library

    Ruggero Rodriguez y Baena; Silvana Rizzo; Luigi Manzo; Saturnino Marco Lupi

    2017-01-01

    .... The goal of this review is to discuss the role of titanium substrates as nanoscale surface modification tools for improving various aspects of implantology, including osseointegration and antibacterial properties...

  2. A Double-Ring Algorithm for Modeling Solar Active Regions: Unifying Kinematic Dynamo Models and Surface Flux-Transport Simulations

    CERN Document Server

    Muñoz-Jaramillo, Andrés; Martens, Petrus C H; Yeates, Anthony R

    2010-01-01

    The emergence of tilted bipolar active regions and the dispersal of their flux, mediated via processes such as diffusion, differential rotation and meridional circulation is believed to be responsible for the reversal of the Sun's polar field. This process (commonly known as the Babcock-Leighton mechanism) is usually modeled as a near-surface, spatially distributed $\\alpha$-effect in kinematic mean-field dynamo models. However, this formulation leads to a relationship between polar field strength and meridional flow speed which is opposite to that suggested by physical insight and predicted by surface flux-transport simulations. With this in mind, we present an improved double-ring algorithm for modeling the Babcock-Leighton mechanism based on active region eruption, within the framework of an axisymmetric dynamo model. Using surface flux-transport simulations we first show that an axisymmetric formulation -- which is usually invoked in kinematic dynamo models -- can reasonably approximate the surface flux dy...

  3. Transport and fate of hexachlorocyclohexanes in the oceanic air and surface seawater

    Directory of Open Access Journals (Sweden)

    Z. Xie

    2011-06-01

    Full Text Available Hexachlorocyclohexanes (HCHs are ubiquitous organic pollutants derived from pesticide application. They are subject to long-range transport, persistent in the environment, and capable of accumulation in biota. Shipboard measurements of HCH isomers (α-, γ- and β-HCH in surface seawater and boundary layer atmospheric samples were conducted in the Atlantic and the Southern Ocean in October to December of 2008. ΣHCHs concentrations (the sum of α-, γ- and β-HCH in the lower atmosphere ranged from 11.8 to 36.9 pg m−3 (mean: 26.6 ± 11.0 pg m−3 in the Northern Hemisphere (NH, and from 1.5 to 4.0 pg m−3 (mean: 2.8 ± 1.1 pg m−3 in the Southern Hemisphere (SH, respectively. Water concentrations were: α-HCH 0.33–46.8 pg l−1, γ-HCH 0.02–33.2 pg l−1 and β-HCH 0.11–2 pg l−1. HCH concentrations decreased from the North Atlantic to the Southern Ocean, indicating historical use of HCHs in the NH. Spatial distribution showed increasing concentrations from the equator towards North and South latitudes illustrating the concept of cold condensation and less interhemispheric mixing process. In comparison to concentrations measured in 1987–1999/2000, gaseous HCHs were slightly lower, while dissolved HCHs decreased by factor of 2–3 orders of magnitude. Air-water exchange gradients suggested net deposition for α-HCH (mean: 3759 pg m−2 day−1 and γ-HCH (mean: 1987 pg m−2 day−1, whereas β-HCH varied between equilibrium (volatilization: <0–12 pg m−2 day−1 and net deposition (range: 6–687 pg m−2 day−1, indicating a multi-hopper transport behavior. Climate change may significantly accelerate the releasing process of "old" HCHs from continental storage (e.g. soil, vegetation and high mountains and drive long-range transport from sources to deposition in the

  4. The effects of surface functionalization on rheology, structure and transport properties of nanocomposites

    Science.gov (United States)

    Ranka, Moulik A.

    In this thesis, the effects of surface functionalization using hydrophobic silanes on properties of nanocomposites comprising 42 nm silica particles suspended in a melt of polyethylene-glycol (PEG) are studied using rheological, static and dynamic x-ray scattering studies. The nanocomposites are studied in the low molecular weight unentangled (PEG-400) and high molecular weight entangled (PEG-20000) regimes. We find no differences in the properties of the bare and silanized particles in the low volume fraction regime up to where the interparticle separation distance h > 6Rg. In the region of 6Rg > h > 3Rg (5Rg > h > 3Rg, in case of entangled melts), we find substantial differences in the rheological, structure and transport properties when comparing the bare and silanized particles. In the unentangled melts, we observe up to four orders of magnitude drop in the viscosity of the composites at the highest levels of silanization and observe shear thinning behavior that is unlike what is universally seen for hard spheres. For the entangled melts, a yield stress is observed for the silanized particles that is absent in the case of the bare particles and there is a divergence in the elastic modulus in comparison to bare particles. We observe an anomalous speed up in the density relaxations and an associated maxima in structure properties in the case of unentangled melts which has been reported previously for particles experiencing soft repulsive potentials. A clear reentrant behavior in structure and transport properties is observed for bare particles in the entangled melts that have been previously reported for particles interacting with soft repulsive potentials such as square shoulder and ramp potentials. In the silanized systems, the density relaxation times although lower than bare particles, is ii unaffected by increasing volume fraction up to h ~ 3Rg and is decoupled from the structure properties which are non-monotonic similar to bare particles. In the region of

  5. Implementing, monitoring, evaluating, and updating a road safety programme : contribution to the Best in Europe 2003 Conference of the European Transport Safety Council: Targeted Road Safety Programmes in the EU, Brussels, June 10, 2003.

    NARCIS (Netherlands)

    Wegman, F.C.M.

    2004-01-01

    In all EU countries, attempts are being made to promote road safety, and each country has its own approach. This contribution examines the implementation of road safety programmes, their monitoring and evaluation, and their updating. For analyzing policy implementation, monitoring and evaluation, a

  6. Implementing, monitoring, evaluating, and updating a road safety programme : contribution to the Best in Europe 2003 Conference of the European Transport Safety Council: Targeted Road Safety Programmes in the EU, Brussels, June 10, 2003.

    NARCIS (Netherlands)

    Wegman, F.C.M.

    2004-01-01

    In all EU countries, attempts are being made to promote road safety, and each country has its own approach. This contribution examines the implementation of road safety programmes, their monitoring and evaluation, and their updating. For analyzing policy implementation, monitoring and evaluation, a

  7. Micromechanism of oxygen transport during initial stage oxidation in Si(100) surface: A ReaxFF molecular dynamics simulation study

    Science.gov (United States)

    Sun, Yu; Liu, Yilun; Chen, Xuefeng; Zhai, Zhi; Xu, Fei; Liu, Yijun

    2017-06-01

    The early stage oxidation in Si(100) surface has been investigated in this work by a reactive force field molecular dynamics (ReaxFF MD) simulation, manifesting that the oxygen transport acted as a dominant issue for initial oxidation process. Due to the oxidation, a compressive stress was generated in the oxide layer which blocked the oxygen transport perpendicular to the Si(100) surface and further prevented oxidation in the deeper layer. In contrast, thermal actuation was beneficial to the oxygen transport into deeper layer as temperature increases. Therefore, a competition mechanism was found for the oxygen transport during early stage oxidation in Si(100) surface. At room temperature, the oxygen transport was governed by the blocking effect of compressive stress, so a better quality oxide film with more uniform interface and more stoichiometric oxide structure was obtained. Indeed, the mechanism presented in this work is also applicable for other self-limiting oxidation (e.g. metal oxidation) and is helpful for the design of high-performance electronic devices.

  8. Fate of Uranium During Transport Across the Groundwater-Surface Water Interface

    Energy Technology Data Exchange (ETDEWEB)

    Jaffe, Peter R. [Princeton Univ., NJ (United States); Kaplan, Daniel I. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-06-30

    Discharge of contaminated groundwater to surface waters is of concern at many DOE facilities. For example, at F-Area and TNX-Area on the Savannah River Site, contaminated groundwater, including uranium, is already discharging into natural wetlands. It is at this interface where contaminants come into contact with the biosphere. These this research addressed a critical knowledge gap focusing on the geochemistry of uranium (or for that matter, any redox-active contaminant) in wetland systems. Understanding the interactions between hydrological, microbial, and chemical processes will make it possible to provide a more accurate conceptual and quantitative understanding of radionuclide fate and transport under these unique conditions. Understanding these processes will permit better long-term management and the necessary technical justification for invoking Monitored Natural Attenuation of contaminated wetland areas. Specifically, this research did provide new insights on how plant-induced alterations to the sediment biogeochemical processes affect the key uranium reducing microorganisms, the uranium reduction, its spatial distribution, the speciation of the immobilized uranium, and its long-term stability. This was achieved by conducting laboratory mesocosm wetland experiments as well as field measurements at the SRNL. Results have shown that uranium can be immobilized in wetland systems. To a degree some of the soluble U(VI) was reduced to insoluble U(IV), but the majority of the immobilized U was incorporated into iron oxyhydroxides that precipitated onto the root surfaces of wetland plants. This U was immobilized mostly as U(VI). Because it was immobilized in its oxidized form, results showed that dry spells, resulting in the lowering of the water table and the exposure of the U to oxic conditions, did not result in U remobilization.

  9. Campylobacter fetus surface layer proteins are transported by a type I secretion system.

    Science.gov (United States)

    Thompson, S A; Shedd, O L; Ray, K C; Beins, M H; Jorgensen, J P; Blaser, M J

    1998-12-01

    The virulence of Campylobacter fetus, a bacterial pathogen of ungulates and humans, is mediated in part by the presence of a paracrystalline surface layer (S-layer) that confers serum resistance. The subunits of the S-layer are S-layer proteins (SLPs) that are secreted in the absence of an N-terminal signal sequence and attach to either type A or B C. fetus lipopolysaccharide in a serospecific manner. Antigenic variation of multiple SLPs (encoded by sapA homologs) of type A strain 23D occurs by inversion of a promoter-containing DNA element flanked by two sapA homologs. Cloning and sequencing of the entire 6.2-kb invertible region from C. fetus 23D revealed a probable 5.6-kb operon of four overlapping genes (sapCDEF, with sizes of 1,035, 1,752, 1,284, and 1,302 bp, respectively) transcribed in the opposite direction from sapA. The four genes also were present in the invertible region of type B strain 84-107 and were virtually identical to their counterparts in the type A strain. Although SapC had no database homologies, SapD, SapE, and SapF had predicted amino acid homologies with type I protein secretion systems (typified by Escherichia coli HlyBD/TolC or Erwinia chrysanthemi PrtDEF) that utilize C-terminal secretion signals to mediate the secretion of hemolysins, leukotoxins, or proteases from other bacterial species. Analysis of the C termini of four C. fetus SLPs revealed conserved structures that are potential secretion signals. A C. fetus sapD mutant neither produced nor secreted SLPs. E. coli expressing C. fetus sapA and sapCDEF secreted SapA, indicating that the sapCDEF genes are sufficient for SLP secretion. C. fetus SLPs therefore are transported to the cell surface by a type I secretion system.

  10. Conception of transport cask with advanced safety, aimed at transportation and storage of spent nuclear fuel of power reactors, which meets the requirements of IAEA in terms of safety and increased stability during beyond-design-basis accidents and acts of terrorism

    Energy Technology Data Exchange (ETDEWEB)

    Il' kaev, R.I.; Matveev, V.Z.; Morenko, A.I.; Shapovalov, V.I. [Russian Federal Nuclear Center - All-Russian Research Inst. of Experimental Physics, Sarov (Russian Federation); Semenov, A.G.; Sergeyev, V.M.; Orlov, V.K. [All-Russian Research Inst. of Inorganic Materials, Moscow (Russian Federation); Shatalov, V.V.; Gotovchikov, V.T.; Seredenko, V.A. [All-Russian Research Inst. of Applied Chemistry, Moscow (Russian Federation); Haire, Jonathan M.; Forsberg, C.W. [Oak Ridge National Lab., Oak Ridge (United States)

    2004-07-01

    The report is devoted to the problem of creation of a new generation of multi-purpose universal transport cask with advanced safety, aimed at transportation and storage of spent nuclear fuel (SNF) of power reactors, which meets all requirements of IAEA in terms of safety and increased stability during beyond-design-basis accidents and acts of terrorism. Meeting all IAEA requirements in terms of safety both in normal operation conditions and accidents, as well as increased stability of transport cask (TC) with SNF under the conditions of beyond-design-basis accidents and acts of terrorism has been achieved in the design of multi-purpose universal TC due to the use of DU (depleted uranium) in it. At that, it is suggested to use DU in TC, which acts as effective gamma shield and constructional material in the form of both metallic depleted uranium and metal-ceramic mixture (cermet), based on stainless or carbon steel and DU dioxide. The metal in the cermet is chosen to optimize cask performance. The use of DU in the design of multi-purpose universal TC enables getting maximum load of the container for spent nuclear fuel when meeting IAEA requirements in terms of safety and providing increased stability of the container with SNF under conditions of beyond-design-basis accident and acts of terrorism.

  11. Fate and Transport of Nutrients in Groundwater and Surface Water in an Urban Slum Catchment Kampala, Uganda

    NARCIS (Netherlands)

    Nyenje, P.

    2014-01-01

    This study investigates the generation, transport and fate of sanitation-related nutrients in groundwater and surface water in an urban slum area in sub-Saharan Africa. In excess, nutrients can cause eutrophication of downstream water bodies. The study argues that nitrogen-containing rains and

  12. 50 CFR 36.12 - Use of snowmobiles, motorboats, dog teams and other means of surface transportation traditionally...

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Use of snowmobiles, motorboats, dog teams... Subsistence Uses § 36.12 Use of snowmobiles, motorboats, dog teams and other means of surface transportation... provision of subchapter C of title 50 CFR the use of snowmobiles, motorboats, dog teams and other means...

  13. Fate and Transport of Nutrients in Groundwater and Surface Water in an Urban Slum Catchment Kampala, Uganda

    NARCIS (Netherlands)

    Nyenje, P.

    2014-01-01

    This study investigates the generation, transport and fate of sanitation-related nutrients in groundwater and surface water in an urban slum area in sub-Saharan Africa. In excess, nutrients can cause eutrophication of downstream water bodies. The study argues that nitrogen-containing rains and domes

  14. Reactive transport in surface sediments. II. Media: an object-oriented problem-solving environment for early diagenesis

    NARCIS (Netherlands)

    Meysman, F.J.R.; Middelburg, J.J.; Herman, P.M.J.; Heip, C.H.R.

    2003-01-01

    The MEDIA (Modelling Early DIAgenesis) software package comprises a flexible and extensible software system that provides problem-solving assistance for simulating 1D reactive transport in surface sediments. MEDIA allows multiple diagenetic models to be built by extending a model template with new m

  15. Magnetic transport apparatus for the production of ultracold atomic gases in the vicinity of a dielectric surface

    CERN Document Server

    Haendel, S; Wiles, T P; Hopkins, S A; Cornish, S L

    2011-01-01

    We present an apparatus designed for studies of atom-surface interactions using quantum degenerate gases of $^{85}$Rb and $^{87}$Rb in the vicinity of a room temperature dielectric surface. The surface to be investigated is a super-polished face of a glass Dove prism mounted in a glass cell under ultra-high vacuum (UHV). To maintain excellent optical access to the region surrounding the surface magnetic transport is used to deliver ultracold atoms from a separate vacuum chamber housing the magneto-optical trap (MOT). We present a detailed description of the vacuum apparatus highlighting the novel design features; a low profile MOT chamber and the inclusion of an obstacle in the transport path. We report the characterization and optimization of the magnetic transport around the obstacle, achieving transport efficiencies of 70% with negligible heating. Finally we demonstrate the loading of a hybrid optical-magnetic trap with $^{87}$Rb and the creation of Bose-Einstein condensates via forced evaporative cooling ...

  16. Estrogen transport in surface runoff from agricultural fields treated with two different application methods of dairy manure

    Science.gov (United States)

    While the land-application of animal manure provides many benefits, concerns exist regarding the subsequent transport of hormones and potential effects on aquatic ecosystems. This study compares two methods of dairy manure application, surface broadcasting and shallow disk injection, on the fate and...

  17. Stratification, Sediment Transport, and the Early Wet Surface of Meridiani Planum

    Science.gov (United States)

    Grotzinger, J. P.; Athena Science Team

    2004-12-01

    the spectral gap in the size distribution of eolian dunes and ripples. A further clue to the likely subaqueous origin for Eagle cross-laminae is provided by their festoon geometry which requires that the reconstructed ripples have three-dimensional geometry defined by highly sinuous crestlines. In terrestrial settings such bedforms are known only to develop in subaqueous, subcritical flows, with velocities of less than one meter per second. On Mars, the initiation of subaqueous sediment movement is expected to occur at velocities lower than on earth, by a factor of 1.34. With respect to length scales, such as bedform dimensions, the scaling factor turns out to have the opposite sense so that, given dynamically similar flows, ripples on Mars might be larger by a factor of 1.34. Neither of these rescaling effects influences the interpretation that cm-scale, festoon cross-lamination at Eagle crater most probably requires sediment transport in subaqueous, low-velocity flows across the Meridiani plains. The assemblage of primary facies recorded at Eagle crater is most consistent with an environment characterized by episodic inundation by surface water to shallow depths, followed by evaporation, and exposure and desiccation. Terrestrial analogs for such a suite of facies and surface processes include small interdune depressions, playa lakes, and sabkhas adjacent to marginal seaways. All rover observations indicate that the evaporite-bearing cross-bedded unit extends at least on the order of 1 km though MOC and THEMIS data suggest it extends much further.

  18. Upscaling of the specific surface area for reactive transport modelling in fractured rock

    Science.gov (United States)

    Cvetkovic, Vladimir

    2014-05-01

    The impact of flow heterogeneity on chemical transport from single to multiple fractures, is investigated. The emphasis is on the dynamic nature of the specific surface area (SSA) due to heterogeneity of the flow, relative to a purely geometrical definition. It is shown how to account for SSA as a random variable in modelling multi-component reactions. The flow-dependent SSA is interpreted probabilistically, following inert tracer particles along individual fractures. Upscaling to a fracture network is proposed as a time-domain random walk based on the statistics of SSA for single fractures. Statistics of SSA are investigated for three correlation structures of transmissivity, one classical multi-gaussian, and two non-Gaussian. The coefficient of variation of single fracture SSA decreases monotonously with the distance over the fracture length; the CV of the upscaled SSA reduces further such that after ca 20 fractures it is under 0.1 for a disconnected field, and around 0.2 for connected and multi-gaussian fields. This implies that after 10-20 fractures, uncertainty in SSA is significantly reduced, justifying the use of an effective value. A conservative, lower bound for the dimensionless upscaled effective SSA was found to be 1, suitable for all heterogeneity structures, assuming the cubic hydraulic law applicable.

  19. EHD-driven mass transport enhancement in surface dielectric barrier discharges

    Science.gov (United States)

    Taglioli, M.; Shaw, A.; Wright, A.; FitzPatrick, B.; Neretti, G.; Seri, P.; Borghi, C. A.; Iza, F.

    2016-12-01

    Surface dielectric barrier discharges (S-DBDs) have received renewed attention in recent years for their potential application in emerging biomedical, environmental and agricultural applications. In most of these applications, the plasma is not in direct contact with the substrate being treated and the transport of reactive species from the plasma to the substrate is typically assumed to be controlled by diffusion. Here, we demonstrate that generally this is not the case and that electrohydrodynamic (EHD) forces can produce jets that enhance the delivery of these species, thereby influencing the efficacy of the S-DBD device. In particular, we have studied the degradation of potassium indigotrisulfonate solutions exposed to S-DBDs generated in devices with annular electrodes of diameters varying between 10 mm and 50 mm. All the devices were driven at constant linear power density (watts per cm of plasma length) and although local plasma properties remained the same in all the devices, a three-fold efficacy enhancement was observed for devices of diameter ~30 mm due to EHD effects.

  20. A Review of Removable Surface Contamination on Radioactive Materials Transportation Containers

    Energy Technology Data Exchange (ETDEWEB)

    Kennedy, Jr, W. E.; Watson, E. C.; Murphy, D. W.; Harrer, B. J.; Harty, R.; Aldrich, J. M.

    1981-05-01

    This report contains the results of a study sponsored by the U.S. Nuclear Regulatory Commission (NRC) of removable surface contamination on radioactive materials transportation containers. The purpose of the study is to provide information to the NRC during their review of existing regulations. Data was obtained from both industry and literature on three major topics: 1) radiation doses, 2) economic costs, and 3) contamination frequencies. Containers for four categories of radioactive materials are considered including radiopharmaceuticals, industrial sources, nuclear fuel cycle materials, and low-level radioactive waste. Assumptions made in this study use current information to obtain realistic yet conservative estimates of radiation dose and economic costs. Collective and individual radiation doses are presented for each container category on a per container basis. Total doses, to workers and the public, are also presented for spent fuel cask and low-level waste drum decontamination. Estimates of the additional economic costs incurred by lowering current limits by factors of 10 and 100 are presented. Current contamination levels for each category of container are estimated from the data collected. The information contained in this report is designed to be useful to the NRC in preparing their recommendations for new regulations.

  1. A Versatile Lifting Device for Lunar Surface Payload Handling, Inspection & Regolith Transport Operations

    Science.gov (United States)

    Doggett, William; Dorsey, John; Collins, Tim; King, Bruce; Mikulas, Martin

    2008-01-01

    Devices for lifting and transporting payloads and material are critical for efficient Earth-based construction operations. Devices with similar functionality will be needed to support lunar-outpost construction, servicing, inspection, regolith excavation, grading and payload placement. Past studies have proposed that only a few carefully selected devices are required for a lunar outpost. One particular set of operations involves lifting and manipulating payloads in the 100 kg to 3,000 kg range, which are too large or massive to be handled by unassisted astronauts. This paper will review historical devices used for payload handling in space and on earth to derive a set of desirable features for a device that can be used on planetary surfaces. Next, an innovative concept for a lifting device is introduced, which includes many of the desirable features. The versatility of the device is discussed, including its application to lander unloading, servicing, inspection, regolith excavation and site preparation. Approximate rules, which can be used to size the device for specific payload mass and reach requirements, are provided. Finally, details of a test-bed implementation of the innovative concept, which will be used to validate the structural design and develop operational procedures, is provided.

  2. Surface Evolution of the Sun's Magnetic Field: A Historical Review of the Flux-Transport Mechanism

    Directory of Open Access Journals (Sweden)

    Sheeley Jr. Neil R.

    2005-10-01

    Full Text Available This paper reviews our attempts to understand the transport of magnetic flux on the Sun from the Babcock and Leighton models to the recent revisions that are being used to simulate the field over many sunspot cycles. In these models, the flux originates in sunspot groups and spreads outward on the surface via supergranular diffusion; the expanding patterns become sheared by differential rotation, and the remnants are carried poleward by meridional flow. The net result of all of the flux eruptions during a sunspot cycle is to replace the initial polar fields with new fields of opposite polarity. A central issue in this process is the role of meridional flow, whose relatively low speed is near the limit of detection with Doppler techniques. A compelling feature of Leighton’s original model was that it reversed the polar fields without the need for meridional flow. Now, we think that meridional flow is central to the reversal and to the dynamo itself.

  3. Geocenter motion due to surface mass transport from GRACE satellite data

    Science.gov (United States)

    Riva, R. E. M.; van der Wal, W.; Lavallée, D. A.; Hashemi Farahani, H.; Ditmar, P.

    2012-04-01

    Measurements of mass redistribution from satellite gravimetry are insensitive to geocenter motions. However, geocenter motions can be constrained by satellite gravity data alone if we partition mass changes between land and oceans, under the assumption that the ocean is passive (i.e., in gravitational equilibrium with the land load and the solid earth). Here, we make use of 8 years (2003-2010) of optimally filtered monthly GRACE-based solutions produced at TU Delft to determine changes in the land load and the corresponding geocenter motion, through an iterative procedure. We pay particular attention to correcting for signal leakage caused by the limited spatial resolution of GRACE. We also investigate how the choice of a model of glacial isostatic adjustment (GIA) affects the estimated geocenter motion trend due to present-day surface mass transport. Finally, we separate the contribution of ice masses from that of land hydrology and show how they have a different sensitivity to the chosen GIA model and observational time-span.

  4. Research on Network Safety Optimization of Military POL Transportation%军队油料运输网络安全优化研究

    Institute of Scientific and Technical Information of China (English)

    王耀; 雍歧东; 周济晓; 向群

    2012-01-01

      The route-selection action of military petro-oil and lubricants (POL) transportation is restricted and influenced by transportation network and the risk of transportation path. The transportation network is the important part that the enemy tends to attack in the war,so the risk of POL transportation is huge. Optimizing the transportation network and selecting the optimum route are the important approaches that avoid the enemy’s attack and ensure the POL transportation safety. Bi-level decision-makers,namely the Military Communications and Transportation Department of the General Logistics Department and the Military Representative Office or the POL-transportation Fleets as viewed from different decision-makers,are determined as network-planner and route-selector re-spectively. For the sake of the equilibrium of general risks and the objective optimization of single transportation route,the bi-level programming model is constructed;the transportation network is optimized and the optimum route is chosen. The results show that the new model is reasonable and useful.%  军队油料运输路径选择受交通运输网络和运输线路风险的影响和制约。战时,交通运输网络是敌方破坏的重点,油料运输面临很大风险,安全形势非常严峻。合理优化交通运输网络,选择合适的运输路径是避免敌方破坏、保障油料运输安全的重要途径。从不同决策角度出发,选择以总后勤部军事交通运输部为代表的网络规划者和以各级军事代表处及运油分队为代表的运输路径选择者为两级决策者,以实现总体风险均衡和单条运输路径目标最优为出发点,建立双层规划模型,对运输网络进行优化,选择最优运输路径。该法既可降低不同性质的风险,又能兼顾各种风险的相互影响。

  5. Modeling Np and Pu transport with a surface complexation model and spatially variant sorption capacities: Implications for reactive transport modeling and performance assessments of nuclear waste disposal sites

    Science.gov (United States)

    Glynn, P.D.

    2003-01-01

    One-dimensional (1D) geochemical transport modeling is used to demonstrate the effects of speciation and sorption reactions on the ground-water transport of Np and Pu, two redox-sensitive elements. Earlier 1D simulations (Reardon, 1981) considered the kinetically limited dissolution of calcite and its effect on ion-exchange reactions (involving 90Sr, Ca, Na, Mg and K), and documented the spatial variation of a 90Sr partition coefficient under both transient and steady-state chemical conditions. In contrast, the simulations presented here assume local equilibrium for all reactions, and consider sorption on constant potential, rather than constant charge, surfaces. Reardon's (1981) seminal findings on the spatial and temporal variability of partitioning (of 90Sr) are reexamined and found partially caused by his assumption of a kinetically limited reaction. In the present work, sorption is assumed the predominant retardation process controlling Pu and Np transport, and is simulated using a diffuse-double-layer-surface-complexation (DDLSC) model. Transport simulations consider the infiltration of Np- and Pu-contaminated waters into an initially uncontaminated environment, followed by the cleanup of the resultant contamination with uncontaminated water. Simulations are conducted using different spatial distributions of sorption capacities (with the same total potential sorption capacity, but with different variances and spatial correlation structures). Results obtained differ markedly from those that would be obtained in transport simulations using constant Kd, Langmuir or Freundlich sorption models. When possible, simulation results (breakthrough curves) are fitted to a constant K d advection-dispersion transport model and compared. Functional differences often are great enough that they prevent a meaningful fit of the simulation results with a constant K d (or even a Langmuir or Freundlich) model, even in the case of Np, a weakly sorbed radionuclide under the

  6. Safety management of vehicle transportation in Rujigou Dafeng mining area%汝箕沟大峰采区车辆运输的安全管理

    Institute of Scientific and Technical Information of China (English)

    吕守平; 黄占宙

    2016-01-01

    This article analyzes the safe problems of vehicle transportation in Dafeng mining area, combining with the present situation of mining area from enhancing the risk pre-control management level and improving the working environment quality standardization, discovers system innovation,formulates prevention measures, and increases safety investment to carry out safety risk control, which achieves good results.%系统地分析了大峰采区车辆运输存在的安全问题,并结合矿区现状从提升风险预控管理水平和改善作业环境质量标准化两方面入手,以发掘制度创新、制定防范措施、加大安全投入为抓手来进行安全风险管控,取得了较好的效果。

  7. Mass transfer in fuel cells. [electron microscopy of components, thermal decomposition of Teflon, water transport, and surface tension of KOH solutions

    Science.gov (United States)

    Walker, R. D., Jr.

    1973-01-01

    Results of experiments on electron microscopy of fuel cell components, thermal decomposition of Teflon by thermogravimetry, surface area and pore size distribution measurements, water transport in fuel cells, and surface tension of KOH solutions are described.

  8. Relating a Jet-Surface Interaction Experiment to a Commercial Supersonic Transport Aircraft Using Numerical Simulations

    Science.gov (United States)

    Dippold, Vance F. III; Friedlander, David

    2017-01-01

    Reynolds-Averaged Navier-Stokes (RANS) simulations were performed for a commercial supersonic transport aircraft concept and experimental hardware models designed to represent the installed propulsion system of the conceptual aircraft in an upcoming test campaign. The purpose of the experiment is to determine the effects of jet-surface interactions from supersonic aircraft on airport community noise. RANS simulations of the commercial supersonic transport aircraft concept were performed to relate the representative experimental hardware to the actual aircraft. RANS screening simulations were performed on the proposed test hardware to verify that it would be free from potential rig noise and to predict the aerodynamic forces on the model hardware to assist with structural design. The simulations showed a large region of separated flow formed in a junction region of one of the experimental configurations. This was dissimilar with simulations of the aircraft and could invalidate the noise measurements. This configuration was modified and a subsequent RANS simulation showed that the size of the flow separation was greatly reduced. The aerodynamic forces found on the experimental models were found to be relatively small when compared to the expected loads from the model’s own weight.Reynolds-Averaged Navier-Stokes (RANS) simulations were completed for two configurations of a three-stream inverted velocity profile (IVP) nozzle and a baseline single-stream round nozzle (mixed-flow equivalent conditions). For the Sideline and Cutback flow conditions, while the IVP nozzles did not reduce the peak turbulent kinetic energy on the lower side of the jet plume, the IVP nozzles did significantly reduce the size of the region of peak turbulent kinetic energy when compared to the jet plume of the baseline nozzle cases. The IVP nozzle at Sideline conditions did suffer a region of separated flow from the inner stream nozzle splitter that did produce an intense, but small, region of

  9. School Transportation.

    Science.gov (United States)

    Executive Educator, 1990

    1990-01-01

    This special section on student transportation offers a case study of a school system that recycles buses for safety drills; articles on fuel-saving strategies, the pros and cons of contracting for transportation services or operating a publicly owned bus fleet, and advice on full cost accounting for transportation costs; and a transportation…

  10. Nanofeatured Titanium Surfaces for Dental Implantology: Biological Effects, Biocompatibility, and Safety

    Directory of Open Access Journals (Sweden)

    Ruggero Rodriguez y Baena

    2017-01-01

    Full Text Available Nanotechnology enables the control and modification of the chemical and topographical characteristics of materials of size less than 100 nm, down to 10 nm. The goal of this review is to discuss the role of titanium substrates as nanoscale surface modification tools for improving various aspects of implantology, including osseointegration and antibacterial properties. Techniques that can impart nanoscale topographical features to endosseous implants are described. Since the advent of nanotechnology, cellular specific functions, such as adhesion, proliferation, and differentiation, have been better understood. By applying these technologies, it is possible to direct cellular responses and improve osseointegration. Conversely, modulating surface features by nanotechnology could have the effect of decreased bacterial colonization.

  11. Surface Modified TiO2 Obscurants for Increased Safety and Performance

    Science.gov (United States)

    2012-11-01

    various container geometries. The best performing material was Tiona RCL-9 TiO2 ( Cristal Global) coated in solution with cyclic azasilanes...PFPTMS Pentafluorophenyltrimethoxy silane PTFE Polytetrafluoroethylene RCL-9 Titanium Dioxide material from Cristal Global RH Relative Humidity RPM...due to surface functionalization was Tiona RCL-9 TiO2 ( Cristal Global) coated in solution with cyclic azasilanes, lyophilized to remove the solvent

  12. Safety analysis of stability of surface gas drainage boreholes above goaf areas

    Institute of Scientific and Technical Information of China (English)

    LIU Yu-zhou; LI Xiao-hong

    2007-01-01

    As longwall caving mining method prevails rapidly in China coal mines, amount of gas emission from longwall faces and goaf area increased significantly. Using traditional gas drainage methods, such as drilling upward holes to roof strata in tailgate or drilling inseam and cross-measure boreholes, could not meet methane drainage requirements in a gassy mine. The alternative is to drill boreholes from surface down to the longwall goaf area to drain the gas out. As soon as a coal seam is extracted out, the upper rock strata above the goaf start to collapse or become fractured depending upon the rock characteristics and the height above the coal seam. During overlying rock strata being fractured,boreholes in the area may be damaged due to ground movement after the passage of the longwall face. The sudden damage of a borehole may cause a longwall production halt or even a serious mine accident. A theoretical calculation of the stability of surface boreholes in mining affected area is introduced along with an example of determination of borehole and casing diameters is given for demonstration. By using this method for the drilling design, the damage of surface boreholes caused by excessive mining induced displacement can be effectively reduced if not totally avoided. Borehole and casing diameters as well as characteristics of filling materials can be determined using the proposed method by calculating the horizontal movement and vertical stain at different borehole depths.

  13. Immunogenicity and safety of liposome-vaccine encapsulating hepatitis B surface antigen and phosphodiester CpG oligodeoxynucleotides

    Institute of Scientific and Technical Information of China (English)

    CHUN YAN HE; QING LIANG LIU

    2006-01-01

    CpG oligodeoxynucleotides (CpG ODN) as adjuvant have been extensively studied in recent years. Phosphodiester CpG ODN (PO CpG ODN) can perfectly mimic bacterial DNA in enhancing immune response but are vulnerable to nucleases in vivo. This study aimed to evaluate the immunostimu latory potential and safety of phosphodiester CpG ODN encapsulated in nonphospholipid liposomes.BALB/c mice were immunized intramuscularly with different formulations of liposomes, CpG ODN and hepatitis B surface antigen (HBsAg). The results demonstrated that the encapsulated PO CpG ODN were protected against rapid degradation in vivo and retained their adjuvant activity. PO CpG ODN encapsulated with HBsAg in liposomes induced strong Th1-biased or Th1/Th2 mixed humoral immune response in mice with the magnitude similar to their phosphothioate equivalent in the same formulation.High IFN-gamma production induced by this formulation confirmed the generation of strong cellular immune response. Additionally, co-delivery of HBsAg and PO CpG ODN improved the immune response over that obtained with separate delivery. Safety experiment showed that liposome-encapsulaed PO CpG ODN and HBsAg caused mild systemic and moderate local adverse reaction. In conclusion, our data shows that PO CpG ODN encapsulated in liposomes fully exhibit their Th1-type adjuvant activity and act as a potential adjuvant for vaccines.

  14. Transient heat transfer behavior of water spray evaporative cooling on a stainless steel cylinder with structured surface for safety design application in high temperature scenario

    Science.gov (United States)

    Aamir, Muhammad; Liao, Qiang; Hong, Wang; Xun, Zhu; Song, Sihong; Sajid, Muhammad

    2017-02-01

    High heat transfer performance of spray cooling on structured surface might be an additional measure to increase the safety of an installation against any threat caused by rapid increase in the temperature. The purpose of present experimental study is to explore heat transfer performance of structured surface under different spray conditions and surface temperatures. Two cylindrical stainless steel samples were used, one with pyramid pins structured surface and other with smooth surface. Surface heat flux of 3.60, 3.46, 3.93 and 4.91 MW/m2 are estimated for sample initial average temperature of 600, 700, 800 and 900 °C, respectively for an inlet pressure of 1.0 MPa. A maximum cooling rate of 507 °C/s was estimated for an inlet pressure of 0.7 MPa at 900 °C for structured surface while for smooth surface maximum cooling rate of 356 °C/s was attained at 1.0 MPa for 700 °C. Structured surface performed better to exchange heat during spray cooling at initial sample temperature of 900 °C with a relative increase in surface heat flux by factor of 1.9, 1.56, 1.66 and 1.74 relative to smooth surface, for inlet pressure of 0.4, 0.7, 1.0 and 1.3 MPa, respectively. For smooth surface, a decreasing trend in estimated heat flux is observed, when initial sample temperature was increased from 600 to 900 °C. Temperature-based function specification method was utilized to estimate surface heat flux and surface temperature. Limited published work is available about the application of structured surface spray cooling techniques for safety of stainless steel structures at very high temperature scenario such as nuclear safety vessel and liquid natural gas storage tanks.

  15. Transient heat transfer behavior of water spray evaporative cooling on a stainless steel cylinder with structured surface for safety design application in high temperature scenario

    Science.gov (United States)

    Aamir, Muhammad; Liao, Qiang; Hong, Wang; Xun, Zhu; Song, Sihong; Sajid, Muhammad

    2016-05-01

    High heat transfer performance of spray cooling on structured surface might be an additional measure to increase the safety of an installation against any threat caused by rapid increase in the temperature. The purpose of present experimental study is to explore heat transfer performance of structured surface under different spray conditions and surface temperatures. Two cylindrical stainless steel samples were used, one with pyramid pins structured surface and other with smooth surface. Surface heat flux of 3.60, 3.46, 3.93 and 4.91 MW/m2 are estimated for sample initial average temperature of 600, 700, 800 and 900 °C, respectively for an inlet pressure of 1.0 MPa. A maximum cooling rate of 507 °C/s was estimated for an inlet pressure of 0.7 MPa at 900 °C for structured surface while for smooth surface maximum cooling rate of 356 °C/s was attained at 1.0 MPa for 700 °C. Structured surface performed better to exchange heat during spray cooling at initial sample temperature of 900 °C with a relative increase in surface heat flux by factor of 1.9, 1.56, 1.66 and 1.74 relative to smooth surface, for inlet pressure of 0.4, 0.7, 1.0 and 1.3 MPa, respectively. For smooth surface, a decreasing trend in estimated heat flux is observed, when initial sample temperature was increased from 600 to 900 °C. Temperature-based function specification method was utilized to estimate surface heat flux and surface temperature. Limited published work is available about the application of structured surface spray cooling techniques for safety of stainless steel structures at very high temperature scenario such as nuclear safety vessel and liquid natural gas storage tanks.

  16. GPS based surface displacements – a proxy for discharge and sediment transport from the Greenland Ice Sheet

    Directory of Open Access Journals (Sweden)

    B. Hasholt

    2014-07-01

    Full Text Available The elastic respond of the Earth's surface to mass changes has been measured with Global Positioning System (GPS. Mass loss as accumulated runoff and sediment transport from a 10 000 km2 segment of the Greenland Ice Sheet (GrIS correlated very well (R2 = 0.83 with GPS measured uplift. Accumulated winter precipitation correlated fairly well with surface depression (R2 = 0.69. The relationships are based on seven years of runoff and sediment transport observations from the Watson River (2007–2013, winter precipitation from Kangerlussuaq Airport and GPS observations at Kellyville. GPS recordings of surface subsidence and uplift from 1996–2013 are used to calculate 18 years time series of annual runoff, sediment and solute transport and winter precipitation. Runoff and related transport of sediment and solutes increase over the period, while winter precipitation (land depression tends to decrease. Based on the entire GPS record (1996–2013, it is shown that until 2005–2006 the mass balance of this segment of the GrIS was rather stable – since then there has been an increasing loss of mass, culminating in 2012.

  17. Clay mineral distribution in surface sediments of the South China Sea and its significance for in sediment sources and transport

    Institute of Scientific and Technical Information of China (English)

    刘建国; 陈木宏; 陈忠; 颜文

    2010-01-01

    Clay minerals of surface sediments in the South China Sea (SCS) are analyzed with X-ray diffraction, and their transport is explored with a grain size trend analysis (GSTA) model. Results show that clay mineral types in various sedimentary environments have different sediment sources and transport routes. Sediments in the northern SCS (north of 20°N) between the southwest of Taiwan Island and the outer mouth of the Pearl River have high contents of illite and chlorite, which are derived mainly from sediment...

  18. Transport and deposition of nitrogen oxides and ozone in the atmospheric surface layer

    Science.gov (United States)

    Li, Yongxian

    Tropospheric ozone is an important photochemical air pollutant, which increases respiratory-related diseases, decreases crop yields, and causes other environmental problems. This research has focused on the measurement of soil biogenic emissions of nitric oxide (NO), one of the precursors for ozone formation, from intensively managed soils in the Southeast US, and examined the transport and deposition of NOx (NO + NO2) and ozone in the atmospheric surface layer, and the effects of NO emissions and its chemical reactions on ozone flux and deposition to the earth's surface. Emissions of nitric oxide were measured from an intensively managed agricultural soil, in the lower coastal plain of North Carolina (near Plymouth, NC), using a dynamic chamber technique. Measurements of soil NO emissions in several crop canopies were conducted at four different sites in North Carolina during late spring and summer of 1994-1996. The turbulent fluxes of NO2 and O3 at 5 m and 10 m above the ground were measured using the eddy-correlation technique near Plymouth, NC during late spring of 1995 and summer of 1996, concurrent with measurements of soil NO emissions using the dynamic chamber system. Soil NO emission from within the corn field was high averaging approximately 35 ng N/m2/s during the measurement period of 1995. In another study, vertical measurements of ozone were made on a 610 m tall tower located 15 km Southeast of Raleigh, NC during the summers of 1993-1997, as part of an effort by the State of North Carolina to develop a State Implementation Plan (SIP) for ozone control in the Raleigh Metropolitan Statistical Area. A strong correlation was observed between the nighttime and early morning ozone concentrations in the residual layer (CR) above the NBL and the maximum ground level concentration (C o max) the following afternoon. Based on this correlation, an empirical regression equation (Co max = 27.67*exp(0.016 CR)) was developed for predicting maximum ground level ozone

  19. A non-equilibrium model for soil heating and moisture transport during extreme surface heating

    Directory of Open Access Journals (Sweden)

    W. J. Massman

    2015-03-01

    Full Text Available With increasing use of prescribed fire by land managers and increasing likelihood of wildfires due to climate change comes the need to improve modeling capability of extreme heating of soils during fires. This issue is addressed here by developing a one-dimensional non-equilibrium model of soil evaporation and transport of heat, soil moisture, and water vapor, for use with surface forcing ranging from daily solar cycles to extreme conditions encountered during fires. The model employs a linearized Crank–Nicolson scheme for the conservation equations of energy and mass and its performance is evaluated against dynamic soil temperature and moisture observations obtained during laboratory experiments on soil samples exposed to surface heat fluxes ranging between 10 000 and 50 000 W m−2. The Hertz–Knudsen equation is the basis for constructing the model's non-equilibrium evaporative source term. The model includes a dynamic residual soil moisture as a function of temperature and soil water potential, which allows the model to capture some of the dynamic aspects of the strongly bound soil moisture that seems to require temperatures well beyond 150 °C to fully evaporate. Furthermore, the model emulates the observed increase in soil moisture ahead of the drying front and the hiatus in the soil temperature rise during the strongly evaporative stage of drying. It also captures the observed rapid evaporation of soil moisture that occurs at relatively low temperatures (50–90 °C. Sensitivity analyses indicate that the model's success results primarily from the use of a temperature and moisture potential dependent condensation coefficient in the evaporative source term. The model's solution for water vapor density (and vapor pressure, which can exceed one standard atmosphere, cannot be experimentally verified, but they are supported by results from (earlier and very different models developed for somewhat different purposes and for different porous

  20. Biomimetic Bacterial Identification Platform Based on Thermal Wave Transport Analysis (TWTA) through Surface-Imprinted Polymers.

    Science.gov (United States)

    Steen Redeker, Erik; Eersels, Kasper; Akkermans, Onno; Royakkers, Jeroen; Dyson, Simba; Nurekeyeva, Kunya; Ferrando, Beniamino; Cornelis, Peter; Peeters, Marloes; Wagner, Patrick; Diliën, Hanne; van Grinsven, Bart; Cleij, Thomas Jan

    2017-05-12

    This paper introduces a novel bacterial identification assay based on thermal wave analysis through surface-imprinted polymers (SIPs). Aluminum chips are coated with SIPs, serving as synthetic cell receptors that have been combined previously with the heat-transfer method (HTM) for the selective detection of bacteria. In this work, the concept of bacterial identification is extended toward the detection of nine different bacterial species. In addition, a novel sensing approach, thermal wave transport analysis (TWTA), is introduced, which analyzes the propagation of a thermal wave through a functional interface. The results presented here demonstrate that bacterial rebinding to the SIP layer resulted in a measurable phase shift in the propagated wave, which is most pronounced at a frequency of 0.03 Hz. In this way, the sensor is able to selectively distinguish between the different bacterial species used in this study. Furthermore, a dose-response curve was constructed to determine a limit of detection of 1 × 10(4) CFU mL(-1), indicating that TWTA is advantageous over HTM in terms of sensitivity and response time. Additionally, the limit of selectivity of the sensor was tested in a mixed bacterial solution, containing the target species in the presence of a 99-fold excess of competitor species. Finally, a first application for the sensor in terms of infection diagnosis is presented, revealing that the platform is able to detect bacteria in clinically relevant concentrations as low as 3 × 10(4) CFU mL(-1) in spiked urine samples.

  1. Kinesin-5/Eg5 is important for transport of CARTS from the trans-Golgi network to the cell surface

    Science.gov (United States)

    Villeneuve, Julien; van Galen, Josse; Cruz-Garcia, David; Tagaya, Mitsuo

    2013-01-01

    Here we report that the kinesin-5 motor Klp61F, which is known for its role in bipolar spindle formation in mitosis, is required for protein transport from the Golgi complex to the cell surface in Drosophila S2 cells. Disrupting the function of its mammalian orthologue, Eg5, in HeLa cells inhibited secretion of a protein called pancreatic adenocarcinoma up-regulated factor (PAUF) but, surprisingly, not the trafficking of vesicular stomatitis virus G protein (VSV-G) to the cell surface. We have previously reported that PAUF is transported from the trans-Golgi network (TGN) to the cell surface in specific carriers called CARTS that exclude VSV-G. Inhibition of Eg5 function did not affect the biogenesis of CARTS; however, their migration was delayed and they accumulated near the Golgi complex. Altogether, our findings reveal a surprising new role of Eg5 in nonmitotic cells in the facilitation of the transport of specific carriers, CARTS, from the TGN to the cell surface. PMID:23857769

  2. Surface electronic transport measurements: A micro multi-point probe approach

    DEFF Research Database (Denmark)

    Barreto, Lucas

    2014-01-01

    This work is mostly focused on the study of electronic transport properties of two-dimensional materials, in particular graphene and topological insulators. To study these, we have improved a unique micro multi-point probe instrument used to perform transport measurements. Not only the experimental...

  3. Transport of temperature and humidity variance and covariance in the marine surface layer

    DEFF Research Database (Denmark)

    Sempreviva, A.M.; Højstrup, J.

    1998-01-01

    In this paper we address the budget of potential temperature T and moisture mixing ratio q variances as well as the q - T covariance budget. We focus on the vertical transport and study the quantities contained in these terms. Estimates of transport terms are rare and to the best of our knowledge...

  4. 论油气储运设施安全的重要性%On the Importance of safety of oil & gas storage and transportation facilities

    Institute of Scientific and Technical Information of China (English)

    钱建华

    2012-01-01

    油气储运设施是连接石油工业产、运、销各环节的纽带,其安全重要性日益凸显.介绍了油气储存和运输设施的分类依据及主要类型;从储运介质的易燃易爆和毒害性、油气储运设施易构成重大危险源两个方面论述了油气储运设施安全的重要性;通过总结近年发生的大连"7.16"爆炸事故、大型储罐火灾事故及油气管道泄漏事故的教训,指出第三方破坏是导致管道发生泄漏事故的主要原因,而打孔盗油又是其中的重要因素:提出了在工程立项、设计、施工及运行管理的各个阶段加强安全管理的具体措施.%Facilities in the field of oil & gas storage and transportation is a link to connect production, transportation and marketing of petroleum industry, and its significant has become more and more obvious. This paper introduces the classification basis and main types of oil & gas storage and transportation facilities and discusses the importance of safety in oil & gas storage and transportation facilities from two aspects, that is, flammable, explosive and poisonous for the medium stored and transported, and the dangerous source formed easily from the facilities of oil & gas storage and transportation. Lessons from research and investigation on the 7.16 Explosion of Dalian Oil tankfarm, fires of large-scale tanks and leakage of oil and gas pipelines in recent years reveal that the third-party damage is the main reason of leakage of pipelines, in which oil stealing is an important factor. Based on the results, special measures in strengthening safety management in different phases of project approval, design, construction and operation management are proposed.

  5. Wind-induced contaminant transport in near-surface soils with application to radon entry into buildings

    Energy Technology Data Exchange (ETDEWEB)

    Riley, W J [Univ. of California, Berkeley, CA (United States)

    1996-05-01

    Indoor air exposures to gaseous contaminants originating in soil can cause large human health risks. To predict and control these exposures, the mechanisms that affect vapor transport in near-surface soils need to be understood. In particular, radon exposure is a concern since average indoor radon concentrations lead to much higher risks than are generally accepted for exposure to other environmental contaminants. This dissertation examines an important component of the indoor radon problem: the impacts of wind on soil-gas and radon transport and entry into buildings. The research includes experimental and modeling studies of wind`s interactions with a building`s superstructure and the resulting soil-gas and radon flows in the surrounding soil. In addition to exploring the effects of steady winds, a novel modeling technique is developed to examine the impacts of fluctuating winds on soil-gas and radon transport.

  6. How do the definitions of urban and rural matter for transportation safety? Re-interpreting transportation fatalities as an outcome of regional development processes.

    Science.gov (United States)

    McAndrews, Carolyn; Beyer, Kirsten; Guse, Clare E; Layde, Peter

    2016-12-01

    Urban and rural places are integrated through economic ties and population flows. Despite their integration, most studies of road safety dichotomize urban and rural places, and studies have consistently demonstrated that rural places are more dangerous for motorists than urban places. Our study investigates whether these findings are sensitive to the definition of urban and rural. We use three different definitions of urban-rural continua to quantify and compare motor vehicle occupant fatality rates per person-trip and person-mile for the state of Wisconsin. The three urban-rural continua are defined by: (1) popular impressions of urban, suburban, and rural places using a system from regional economics; (2) population density; and (3) the intensity of commute flows to core urbanized areas. In this analysis, the three definitions captured different people and places within each continuum level, highlighting rural heterogeneity. Despite this heterogeneity, the three definitions resulted in similar fatality rate gradients, suggesting a potentially latent "rural" characteristic. We then used field observations of urban-rural transects to refine the definitions. When accounting for the presence of higher-density towns and villages in rural places, we found that low-density urban places such as suburbs and exurbs have fatality rates more similar to those in rural places. These findings support the need to understand road safety within the context of regional development processes instead of urban-rural categories.

  7. Transport of radioactive substances; Der Transport radioaktiver Stoffe

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-12-15

    The report on the transport of radioactive substances covers the following topics: facts on radioactive materials transport, safety of the transport of radioactive substances, legal regulations and guidelines: a multiform but consistent system, transport of nuclear fuels, safety during the transport of nuclear fuel, future transport of spent fuel elements and high-level radioactive wastes in Germany.

  8. ENVIRONMENTAL SAFETY IMPROVEMENT OF SURFACE AND GROUND WATER CONTAMINATION AT THE AIRPORT AREA

    Directory of Open Access Journals (Sweden)

    Svitlana Madzhd

    2016-11-01

    Full Text Available Purpose: Taking into account that the airport "Kyiv" is located in one of the central districts of Kyiv and does not have clearly established sanitary protection zones, the problem of environmental pollution is topical and requires monitoring and research. In order to improve environmental compliance we made assessment of superficial and ground water quality in airport zone. Methods: Water quality was estimated by the biotesting method, hydrochemical analysis, and by oil products detection method. Results We performed analysis of wastewaters of airport “Kyiv” and superficial waters of river Nyvka. The samples took place: above the airport drainage, in the drainage place and below drainage place. We conducted assessment of ground waters, which are sources of water supply, on different distance from an airport (20 m, 500 m, 1000 m, 1500 min. Results of hydrochemical investigations of river indicated excess of nitrogen compounds content compare to regulatory discharge. Thus, it was defined excess of ammonia nitrogen in wastewaters in three times and in place of dispersion – in ten times; the content of nitrite nitrogen in the river sample after discharge exceeds in 22 times norm. Analysis of drinking water in airport zone has showed extremely high level of pollution by nitrite nitrogen exceeding norm in 7-17 times. After analysis it was defined high level of river pollution by oil products (in 26-32 times higher than MPC, and ground water in 1, 5-2 times. Results of biotesting confirmed data of hydrochemical investigations of superficial water state (acute toxicity was observed in drainage area and in place of drainage dispersion. Discussion: Increased content of nitrite indicates the strengthening of decomposition process of organic matter in conditions of slower oxidation of NO into NO. This parameter is major sanitary indicator which indicates pollution of water body. High content of such specific pollutant for aviation transport

  9. Safety of high speed magnetic levitation transportation systems. Magnetic field testing of the TR07 Maglev vehicle and system. Volume 2: Appendices

    Science.gov (United States)

    Dietrich, Fred; Robertson, David; Steiner, George

    1992-04-01

    The safety of various magnetically levitated (maglev) and high speed rail (HSR) trains proposed for application in the United States is of direct concern to the Federal Railroad Administration (FRA). The characterization of electric and magnetic fields (EMF) emissions, both steady (dc) and produced by alternating current (ac) at power frequency (50 Hz in Europe and 60 Hz in the U.S.) and other frequencies in the Extreme Low Frequency (ELF) range (3-3000 Hz), and associated public and worker exposures to EMF, are a growing health and safety concern worldwide. As part of a comprehensive safety assessment of the German TransRapid (TR-07) maglev system undertaken by the FRA, with technical support from the DOT/RSPA Volpe National Transportation System Center (VNTSC), magnetic field measurements were performed by Electric Research and Management, Inc. (ERM) at the Transrapid Test Facility (TVE) in Emsland, Germany in August, 1990. Appendices include catalogs and documents detailing magnetic field data files and their specifics (static fields, spectral waveforms, and temporal and spatial information) by location.

  10. Safety of high speed magnetic levitation transportation systems. Magnetic field testing of the TR07 Maglev vehicle and system. Volume 1: Analysis

    Science.gov (United States)

    Dietrich, Fred; Feero, William E.

    1992-04-01

    The safety of various magnetically levitated (maglev) and high speed rail (HSR) trains proposed for application in the United States is of direct concern to the Federal Railroad Administration (FRA). The characterization of electric and magnetic field (EMF) emissions, both steady (dc) and produced by alternating currents (ac) at power frequency (50 Hz in Europe and 60 Hz in the U.S.) and other frequencies in the Extreme Low Frequency (ELF) range (3-3000 Hz), and associated public and worker exposure to EMF, are a growing health and safety concern worldwide. As part of a comprehensive safety assessment of the German TransRapid (TR-07) maglev system undertaken by the FRA, with technical support from the DOT/RSPA Volpe National Transportation System Center (VNTSC), magnetic field measurements were performed by Electric Research and Management, Inc. (ERM) at the Transrapid Test Facility (TVE) in Emsland, Germany in August, 1990. Analysis summarizes the experimental findings and compares results to common home, work, and power lines emissions for selected spectral bands.

  11. Management of Obstructive Sleep Apnea in Commercial Motor Vehicle Operators: Recommendations of the AASM Sleep and Transportation Safety Awareness Task Force.

    Science.gov (United States)

    Gurubhagavatula, Indira; Sullivan, Shannon; Meoli, Amy; Patil, Susheel; Olson, Ryan; Berneking, Michael; Watson, Nathaniel F

    2017-05-15

    The American Academy of Sleep Medicine Sleep and Transportation Safety Awareness Task Force responded to the Federal Motor Carrier Safety Administration and Federal Railroad Administration Advance Notice of Proposed Rulemaking and request for public comments regarding the evaluation of safety-sensitive personnel for moderate-to-severe obstructive sleep apnea (OSA). The following document represents this response. The most salient points provided in our comments are that (1) moderate-to-severe OSA is common among commercial motor vehicle operators (CMVOs) and contributes to an increased risk of crashes; (2) objective screening methods are available and preferred for identifying at-risk drivers, with the most commonly used indicator being body mass index; (3) treatment in the form of continuous positive airway pressure (CPAP) is effective and reduces crashes; (4) CPAP is economically viable; (5) guidelines are available to assist medical examiners in determining whether CMVOs with moderate-to-severe OSA should continue to work without restrictions, with conditional certification, or be disqualified from operating commercial motor vehicles.

  12. On the Sensitivity of Atmospheric Model Implied Ocean Heat Transport to the Dominant Terms of the Surface Energy Balance

    Energy Technology Data Exchange (ETDEWEB)

    Gleckler, P J

    2004-11-03

    The oceanic meridional heat transport (T{sub o}) implied by an atmospheric General Circulation Model (GCM) can help evaluate a model's readiness for coupling with an ocean GCM. In this study we examine the T{sub o} from benchmark experiments of the Atmospheric Model Intercomparison Project, and evaluate the sensitivity of T{sub o} to the dominant terms of the surface energy balance. The implied global ocean TO in the Southern Hemisphere of many models is equatorward, contrary to most observationally-based estimates. By constructing a hybrid (model corrected by observations) T{sub o}, an earlier study demonstrated that the implied heat transport is critically sensitive to the simulated shortwave cloud radiative effects, which have been argued to be principally responsible for the Southern Hemisphere problem. Systematic evaluation of one model in a later study suggested that the implied T{sub o} could be equally as sensitive to a model's ocean surface latent heat flux. In this study we revisit the problem with more recent simulations, making use of estimates of ocean surface fluxes to construct two additional hybrid calculations. The results of the present study demonstrate that indeed the implied T{sub o} of an atmospheric model is very sensitive to problems in not only the surface net shortwave, but the latent heat flux as well. Many models underestimate the shortwave radiation reaching the surface in the low latitudes, and overestimate the latent heat flux in the same region. The additional hybrid transport calculations introduced here could become useful model diagnostic tests as estimates of implied ocean surface fluxes are improved.

  13. Accurate testing of aspheric surfaces using the transport of intensity equation by properly selecting the defocusing distance.

    Science.gov (United States)

    Soltani, Peyman; Darudi, Ahmad; Nehmetallah, George; Moradi, Ali Reza; Amiri, Javad

    2016-12-10

    In the last decade, the transport of intensity has been increasingly used in microscopy, wavefront sensing, and metrology. In this study, we verify by simulation and experiment the use of the transport of intensity equation (TIE) in the accurate testing of optical aspheric surfaces. Guided by simulation results and assuming that the experimental setup parameters and the conic constants are known, one can estimate an appropriate defocusing distance Δz that leads to an accurate solution of the TIE. In this paper, this method is verified through the construction of a non-nulled experiment for testing the 2D profile of an aspheric surface. The theoretical method and experimental results are compared to validate the results. Finally, to validate the TIE methodology, the phase distribution obtained by TIE is compared with the phase distribution obtained by a Shack-Hartmann sensor.

  14. Thermal-hydraulics and safety analysis of sectored compact reactor for lunar surface power

    Energy Technology Data Exchange (ETDEWEB)

    Schriener, T. M. [Inst. for Space and Nuclear Power Studies, Univ. of New Mexico, Albuquerque, NM (United States); Chemical and Nuclear Engineering Dept., Univ. of New Mexico, Albuquerque, NM (United States); El-Genk, M. S. [Inst. for Space and Nuclear Power Studies, Univ. of New Mexico, Albuquerque, NM (United States); Chemical and Nuclear Engineering Dept., Univ. of New Mexico, Albuquerque, NM (United States); Mechanical Engineering Dept., Univ. of New Mexico, Albuquerque, NM (United States)

    2012-07-01

    The liquid NaK-cooled, fast-neutron spectrum, Sectored Compact Reactor (SCoRe-N 5) concept has been developed at the Univ. of New Mexico for lunar surface power applications. It is loaded with highly enriched UN fuel pins in a triangular lattice, and nominally operates at exit and inlet coolant temperatures of 850 K and 900 K. This long-life reactor generates up to 1 MWth continuously for {>=} 20 years. To avoid a single point failure in reactor cooling, the core is divided into 6 sectors that are neutronically and thermally coupled, but hydraulically independent. This paper performs a 3-D the thermal-hydraulic analysis of SCoRe--N 5 at nominal operation temperatures and a power level of 1 MWth. In addition, the paper investigates the potential of continuing reactor operation at a lower power in the unlikely event that one sector in the core experiences a loss of coolant (LOC). Redesigning the core with a contiguous steel matrix enhances the cooling of the sector experiencing a LOC. Results show that with a core sector experiencing a LOC, SCORE-N 5 could continue operating safely at a reduced power of 166.6 kWth. (authors)

  15. A biogeochemical transport model to simulate the attenuation of chlorinated hydrocarbon contaminant fluxes across the groundwater-surface water interface

    DEFF Research Database (Denmark)

    Malaguerra, Flavio; Binning, Philip John; Albrechtsen, Hans-Jørgen

    2009-01-01

    Chlorinated hydrocarbons originating from point sources are amongst the most prevalent contaminants of ground water and surface water resources. Riparian zones may play an important role in the attenuation of contaminant concentrations when contaminant plumes flow from groundwater to surface water...... because of the occurrence of redox gradients, strongly reductive conditions and high biological activity. In order to meet the expectations of the EU Water Framework Directive, an evaluation of the impact of such plumes on surface water is needed. The aim of this work is to develop a groundwater transport...... number of geochemical processes, allows the simulation of soil geochemical transformations when microbial by-products are released to surface water, and the consideration of non-linear feedbacks on bacterial growth and pollutant transformations. Sensitivity analysis is performed through Monte Carlo...

  16. Effect of bulk charged impurities on the bulk and surface transport in three-dimensional topological insulators

    OpenAIRE

    2013-01-01

    In the three-dimensional topological insulator (TI), the physics of doped semiconductors exists literally side-by-side with the physics of ultra-relativistic Dirac fermions. This unusual pairing creates a novel playground for studying the interplay between disorder and electronic transport. In this mini-review we focus on the disorder caused by the three-dimensionally distributed charged impurities that are ubiquitous in TIs, and we outline the effects it has on both the bulk and surface tran...

  17. Control of start-up and dynamic braking of conveyors used for downhill transport in surface mines

    Energy Technology Data Exchange (ETDEWEB)

    Rosseger, A.; Borczyk, Z.; Kwater, M. (POLTEGOR Instytut, Wroclaw (Poland))

    1992-04-01

    Presents the structure of a microprocessor-aided control system for conveyors used in surface mines for downhill transport. Control of motor start-up and braking is performed in 8 speed stages. Permissible starting time duration is taken into consideration. The procedure of direct current braking is described. The microprocessor activates emergency braking by disc brakes if direct current braking is not sufficient. The system was implemented on four conveyors and has been used successfully since 1990.

  18. Surface electrocardiogram and action potential in mice lacking urea transporter UT-B.

    Science.gov (United States)

    Meng, Yan; Zhao, Chunyan; Zhang, Xuexin; Zhao, Huashan; Guo, Lirong; Lü, Bin; Zhao, Xuejian; Yang, Baoxue

    2009-05-01

    UT-B is a urea transporter protein expressed in the kidney and in many non-renal tissues including erythrocytes, brain, heart, bladder and the testis. The objective of this study was to determine the phenotype of UT-B deletion in the heart. UT-B expression in the heart was studied in wild-type mice vs UT-B null mice by utilizing RT-PCR and Western blot. A surface electrocardiogram (ECG) recording (lead II) was measured in wild-type mice and UT-B null mice at the ages of 6, 16 and 52 weeks. For the action potential recording, the ventricular myocytes of 16 w mice were isolated and recorded by floating microelectrode method. The sodium current was recorded by the patch clamp technique. RT-PCR and Western blot showed the UT-B expression in the heart of wild-type mice. No UT-B transcript and protein was found in UT-B null mice. The ECG recording showed that the P-R interval was significantly prolonged in UT-B null mice ((43.5 +/- 4.2), (45.5 +/- 6.9) and (43.8 +/- 7.6) ms at ages of 6, 16 and 52 weeks) vs wild-type mice ((38.6 +/- 2.9), (38.7 +/- 5.6) and (38.2 +/- 7.3) ms, PUT-B null mice (52 w old). The amplitude of action potential and V (max) decreased significantly in UT-B null mice ((92.17 +/- 10.56) and (101.89 +/- 9.54) mV/s) vs those in wild-type mice (vs (110.51 +/- 10.38) and (109.53 +/- 10.64) mV/s, PUT-B null mice ((123.83 +/- 11.17) and (195.43 +/- 16.41) ms) vs that in wild-type mice ((108.27 +/- 10.85) and (171.00 +/- 15.53) ms, PUT-B null mice (-8.80 +/- 0.92) nA vs that in wild-type mice ((-5.98 +/- 1.07) nA, PUT-B deletion causes progressive heart block in mice.

  19. A review of rapid transport of pesticides from sloping farmland to surface waters: Processes and mitigation strategies

    Institute of Scientific and Technical Information of China (English)

    Xiangyu Tang; Bo Zhu; Hidetaka Katou

    2012-01-01

    Pesticides applied to sloping farmland may lead to surface water contamination through rapid transport processes as influenced by the complex topography and high spatial variability of soil properties and land use in hilly or mountainous regions.However,the fate of pesticides applied to sloping farmland has not been sufficiently elucidated.This article reviews the current understanding of pesticide transport from sloping farmland to surface water.It examines overland flow and subsurface lateral flow in areas where surface soil is underlain by impervious subsoil or rocks and tile drains.It stresses the importance of quantifying and modeling the contributions of various pathways to rapid pesticide loss at catchment and regional scales.Such models could be used in scenario studies for evaluating the effectiveness of possible mitigation strategies such as constructing vegetated strips,depressions,wetlands and drainage ditches,and implementing good agricultural practices.Field monitoring studies should also be conducted to calibrate and validate the transport models as well as biophysical-economic models,to optimize mitigation measures in areas dominated by sloping farmland.

  20. Coupled Soil Water and Heat Transport Near the Land Surface in Arid and Semiarid Regions - Multi-Domain Modeling

    Science.gov (United States)

    Mohanty, Binayak; Yang, Zhenlei

    2016-04-01

    Understanding and simulating coupled water and heat transfer appropriately in the shallow subsurface is of vital significance for accurate prediction of soil evaporation that would improve the coupling between land surface and atmosphere, which consequently could enhance the reliability of weather as well as climate forecast. The theory of Philip and de Vries (1957), accounting for water vapor diffusion only, was considered physically incomplete and consequently extended and improved by several researchers by explicitly taking water vapor convection, dispersion or air flow into account. It is generally believed that the soil moisture is usually low in the near surface layer under highly transient field conditions, particularly in arid and semiarid regions, and that accurate characterization of water vapor transport is critical when modeling simultaneous water and heat transport in the shallow field soils. The first objective of this study is thus mainly to test existing coupled water and heat transport theories and to develop reasonable and simplified numerical models using field experimental data collected under semi-arid and arid hydro-climatic conditions. In addition, more complex multi-domain models are developed for ubiquitous heterogeneous terrestrial surfaces such as horizontal textural contrasts or structured heterogeneity including macropores (fractures, cracks, root channels, etc.). This would make coupled water and heat transfer models applicable in such non-homogeneous soils more meaningful and enhance the skill of land-atmosphere interaction models at a larger context.

  1. In Situ Determination of the Transport Properties of Near-Surface Concrete Using AC Impedance Spectroscopy Techniques

    Directory of Open Access Journals (Sweden)

    Lipeng Wu

    2016-01-01

    Full Text Available The durability of existing concrete structures has increasingly attracted widespread attention in recent years. The phenomenon of performance degradation is often associated with the intrusion of hazardous ions from outside. As the first barrier to external substances intrusion, the near-surface concrete plays an important role in durability. So the performance of in-service concrete structures often depends on the transport properties of the near-surface concrete. Accordingly, information on service conditions and life prediction can be obtained by testing these transport properties. In this paper, an in situ method for chloride ion diffusion coefficient determination is proposed based on the relationship between the alternating current impedance spectroscopy parameters and the chloride ion diffusion coefficient. By a rational design, the new method can synthetically reflect the transport properties of near-surface concrete and is not affected by the presence of the reinforcing bar. In addition, the experimental results show that the method is in good agreement with “PERMIT” migration test which has been widely used. The proposed method is less time consuming and nondestructive and has good reproducibility.

  2. Redistribution of monocarboxylate transporter 2 on the surface of astrocytes in the human epileptogenic hippocampus

    DEFF Research Database (Denmark)

    Lauritzen, Fredrik; Heuser, Kjell; de Lanerolle, Nihal C

    2012-01-01

    Emerging evidence points to monocarboxylates as key players in the pathophysiology of temporal lobe epilepsy (TLE) with hippocampal sclerosis (mesial temporal lobe epilepsy, MTLE). Monocarboxylate transporters (MCTs) 1 and 2, which are abundantly present on brain endothelial cells and perivascular...

  3. Transport of ultracold neutrons through a mirror system with surface roughness as a velocity filter

    CERN Document Server

    Chizhova, L A; Jenke, T; Cronenberg, G; Geltenbort, P; Abele, H; Burgdörfer, J

    2012-01-01

    We perform classical Monte Carlo simulations of ultracold neutron transport through an absorbing-reflecting mirror system in the Earth's gravitational field. We show that the underlying mixed phase space of regular skipping motion and random motion due to disorder scattering can be exploited to realize a velocity filter for ultracold neutrons. The range of velocities selected is controlled by geometric parameters of the wave guide. Possible applications include investigations of transport and scattering dynamics in confined systems.

  4. A Two-Phase Cooling Loop for Fission Surface Power Waste Heat Transport Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Current lunar-based Fission Surface Power (FSP) Systems that will support sustained surface outposts consist of a nuclear reactor with power converters, whose waste...

  5. Effects of bulk charged impurities on the bulk and surface transport in three-dimensional topological insulators

    Science.gov (United States)

    Skinner, B.; Chen, T.; Shklovskii, B. I.

    2013-09-01

    In the three-dimensional topological insulator (TI), the physics of doped semiconductors exists literally side-by-side with the physics of ultrarelativistic Dirac fermions. This unusual pairing creates a novel playground for studying the interplay between disorder and electronic transport. In this mini-review, we focus on the disorder caused by the three-dimensionally distributed charged impurities that are ubiquitous in TIs, and we outline the effects it has on both the bulk and surface transport in TIs. We present self-consistent theories for Coulomb screening both in the bulk and at the surface, discuss the magnitude of the disorder potential in each case, and present results for the conductivity. In the bulk, where the band gap leads to thermally activated transport, we show how disorder leads to a smaller-than-expected activation energy that gives way to variable-range hopping at low temperatures. We confirm this enhanced conductivity with numerical simulations that also allow us to explore different degrees of impurity compensation. For the surface, where the TI has gapless Dirac modes, we present a theory of disorder and screening of deep impurities, and we calculate the corresponding zero-temperature conductivity. We also comment on the growth of the disorder potential in passing from the surface of the TI into the bulk. Finally, we discuss how the presence of a gap at the Dirac point, introduced by some source of time-reversal symmetry breaking, affects the disorder potential at the surface and the mid-gap density of states.

  6. A physically-based integrated numerical model for flow,upland erosion,and contaminant transport in surface-subsurface systems

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    This paper presents a physically-based integrated hydrologic model that can simulate the rain-fall-induced 2D surface water flow, 3D variably saturated subsurface flow, upland soil erosion and transport, and contaminant transport in the surface-subsurface system of a watershed. The model couples surface and subsurface flows based on the assumption of continuity conditions of pressure head and exchange flux at the ground, considering infiltration and evapotranspiration. The upland rill/interrill soil erosion and transport are simulated using a non-equilibrium transport model. Contaminant transport in the integrated surface and subsurface domains is simulated using advection-diffusion equations with mass changes due to sediment sorption and desorption and exchanges between two domains due to infiltration, diffusion, and bed change. The model requires no special treatments at the interface of upland areas and streams and is suitable for wetland areas and agricultural watersheds with shallow streams.

  7. Transport signatures of surface potentials on three-dimensional topological insulators

    Science.gov (United States)

    Roy, Sthitadhi; Das, Sourin

    2016-02-01

    The spin-momentum-locked nature of the robust surface states of three-dimensional topological insulators (3D TIs) makes them promising candidates for spintronics applications. Surface potentials which respect time-reversal symmetry can exist at the surface between a 3D TI and the trivial vacuum. These potentials can distort the spin texture of the surface states while retaining their gapless nature. In this work, the effect of all such surface potentials on the spin textures is studied. Since a tunnel magnetoresistance signal carries the information of the spin texture, it is proposed that spin-polarized tunneling of electrons to a 3D TI surface can be used to uniquely identify the surface potentials and quantitatively characterize them.

  8. From Soil to Surface Water: a Meta-Analysis of Catchment-Scale Organic Matter Production and Transport

    Science.gov (United States)

    Gabor, R. S.; Brooks, P. D.; Perdrial, J. N.

    2015-12-01

    Organic matter plays a fundamental role in the ecology and biogeochemistry of many ecosystems, from soils to headwater streams to oceans. In most catchments, the terrestrial environment is the dominant source of organic matter for the aquatic system, and thus DOM represents a fundamental linkage between soil and surface water. With trends of increasing DOC concentrations observed in many areas of the world, there is growing interest in identifying which factors drive DOM concentration and chemistry. Studies of systems ranging from tropical rainforests to boreal landscapes have identified many catchment characteristics that co-vary with DOM concentration and chemistry. These include climate elements such as solar radiation and precipitation patterns, chemical measurements such as sulfate or chloride concentration, and land use impacts such as percent agriculture. The question of which catchment characteristics actually control DOM can be broken down into two parts: which factors control the production of mobile DOM and what drives DOM transport from the terrestrial to the aquatic system. Here we review studies covering a range of ecosystems, scales, and measurement techniques, to categorize the major state factors that drive catchment controls of aquatic organic matter. Specifically, we identify three major transport vectors that vary both in their timing of DOM transport to surface water and the propensity for DOM originating from terrestrial source areas to be modified during transport. We use this three vector conceptual model of transport to group catchments and identify reproducible signatures of DOM export with varying levels of disturbance. By developing a generalized conceptual model of catchment-scale controls on aquatic organic matter, we can predict how dissolved organic matter will respond to environmental change. This knowledge can then help guide best management practices.

  9. T tubules and surface membranes provide equally effective pathways of carbonic anhydrase-facilitated lactic acid transport in skeletal muscle.

    Directory of Open Access Journals (Sweden)

    Janine Hallerdei

    Full Text Available We have studied lactic acid transport in the fast mouse extensor digitorum longus muscles (EDL by intracellular and cell surface pH microelectrodes. The role of membrane-bound carbonic anhydrases (CA of EDL in lactic acid transport was investigated by measuring lactate flux in muscles from wildtype, CAIV-, CAIX- and CAXIV-single ko, CAIV-CAXIV double ko and CAIV-CAIX-CAXIV-triple ko mice. This was complemented by immunocytochemical studies of the subcellular localization of CAIV, CAIX and CAXIV in mouse EDL. We find that CAXIV and CAIX single ko EDL exhibit markedly but not maximally reduced lactate fluxes, whereas triple ko and double ko EDL show maximal or near-maximal inhibition of CA-dependent lactate flux. Interpretation of the flux measurements in the light of the immunocytochemical results leads to the following conclusions. CAXIV, which is homogeneously distributed across the surface membrane of EDL fibers, facilitates lactic acid transport across this membrane. CAIX, which is associated only with T tubular membranes, facilitates lactic acid transport across the T tubule membrane. The removal of lactic acid from the lumen of T tubuli towards the interstitial space involves a CO2-HCO3- diffusional shuttle that is maintained cooperatively by CAIX within the T tubule and, besides CAXIV, by the CAIV, which is strategically located at the opening of the T tubules. The data suggest that about half the CA-dependent muscular lactate flux occurs across the surface membrane, while the other half occurs across the membranes of the T tubuli.

  10. Spinel-structured surface layers for facile Li ion transport and improved chemical stability of lithium manganese oxide spinel

    Science.gov (United States)

    Lee, Hae Ri; Seo, Hyo Ree; Lee, Boeun; Cho, Byung Won; Lee, Kwan-Young; Oh, Si Hyoung

    2017-01-01

    Li-ion conducting spinel-structured oxide layer with a manganese oxidation state close to being tetravalent was prepared on aluminum-doped lithium manganese oxide spinel for improving the electrochemical performances at the elevated temperatures. This nanoscale surface layer provides a good ionic conduction path for lithium ion transport to the core and also serves as an excellent chemical barrier for protecting the high-capacity core material from manganese dissolution into the electrolyte. In this work, a simple wet process was employed to prepare thin LiAlMnO4 and LiMg0.5Mn1.5O4 layers on the surface of LiAl0.1Mn1.9O4. X-ray absorption studies revealed an oxidation state close to tetravalent manganese on the surface layer of coated materials. Materials with these surface coating layers exhibited excellent capacity retentions superior to the bare material, without undermining the lithium ion transport characteristics and the high rate performances.

  11. Direct-hydrogen-fueled proton-exchange-membrane fuel cell system for transportation applications. Hydrogen vehicle safety report

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, C.E. [Directed Technologies, Inc., Arlington, VA (United States)

    1997-05-01

    This report reviews the safety characteristics of hydrogen as an energy carrier for a fuel cell vehicle (FCV), with emphasis on high pressure gaseous hydrogen onboard storage. The authors consider normal operation of the vehicle in addition to refueling, collisions, operation in tunnels, and storage in garages. They identify the most likely risks and failure modes leading to hazardous conditions, and provide potential countermeasures in the vehicle design to prevent or substantially reduce the consequences of each plausible failure mode. They then compare the risks of hydrogen with those of more common motor vehicle fuels including gasoline, propane, and natural gas.

  12. Transport properties of iron-porphyrin molecule sandwiched between Au surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Kondo, Hisashi [Institute of Industrial Science, University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8505 (Japan); CMSC, National Institute for Materials Science (NIMS), 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047 (Japan)], E-mail: KONDO.Hisashi@nims.go.jp; Kino, Hiori; Nara, Jun [CMSC, National Institute for Materials Science (NIMS), 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047 (Japan); Ohno, Takahisa [Institute of Industrial Science, University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8505 (Japan); CMSC, National Institute for Materials Science (NIMS), 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047 (Japan); MANA, National Institute for Materials Science (NIMS), 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047 (Japan)

    2008-09-30

    The transport properties of an iron-porphyrin molecule sandwiched between Au(1 1 1) electrodes are investigated using the non-equilibrium Green's function method based on the density functional theory, and in particular, the dependence on a terminal-atom position is studied. We consider four models for terminal-atom positions. It is found that the transport properties of the junction system are very sensitive to a terminal-atom position. We also find that the contribution of the d-orbitals of the Fe atom to the transport properties around the Fermi energy strongly changes, depending on a terminal-atom position. From these results, we propose a suitable terminal-atom position for the molecular sensor discussed in the other paper.

  13. Analysis and Countermeasures of the status of safety supervision of the road transport industry%道路运输行业安全监管现状分析及对策研究

    Institute of Scientific and Technical Information of China (English)

    田明

    2015-01-01

    结合道路运输行业安全监管现状,从道路运输行业安全监管职责和内容、监管方式、安全检查方面对道路运输行业安全监管存在的问题进行分析,并有针对性的提出了相应的建议和对策。%Combined with the status of safety supervision of road transport industry, from the analysis of ex-isting safety supervision of the road transport industry in road transportation industry safety supervision re-sponsibilities and content, the way of supervision, security check, and puts forward the corresponding sug-gestions and countermeasures.

  14. Safety assessment of dairy microorganisms: aerobic coryneform bacteria isolated from the surface of smear-ripened cheeses.

    Science.gov (United States)

    Denis, Catherine; Irlinger, Françoise

    2008-09-01

    The group of "coryneform bacteria" belongs to the class of Actinobacteria including a diverse and heterogeneous collection of bacteria of various genera. Most of them are known as environmental residents and/or commensal flora of humans and they are isolated frequently in clinical studies. Actinobacteria include also several aerobic species, present at the surface of smear-ripened cheeses for decades and used as ripening culture in the dairy industry. Their clinical significance is controversial because an easy combination of phenotypic and molecular methods to characterize Actinobacteria at the species level is still lacking. A bibliographical survey was conducted to assess the safety status of Actinobacteria species used as starter culture in fermented dairy foods, according to their technological interest. Aerobic coryneform bacteria isolated from smear-ripened cheeses are most commonly recovered from soil, the environment or food. To date, no clinical infection or food toxi-infection related to smear cheese coryneform bacteria ingestion has been reported. From a taxonomic viewpoint, dairy species are distant from the reference species associated with known pathologies. From a physiological viewpoint, cheese smear coryneform bacteria appear to be related to particular ecological niches: they are all oxidative species, and most are psychrotrophic and unable to grow at 37 degrees C whereas medically relevant coryneform bacteria are facultative anaerobes and grow at 35-37 degrees C. Consequently, technological strains must be selected according to taxonomic criteria (nonpathogenic species) and ecological criteria.

  15. Pseudospin-valve effect on transport in junctions of three-dimensional topological insulator surfaces

    Science.gov (United States)

    Roy, Sthitadhi; Roychowdhury, Krishanu; Das, Sourin

    2016-07-01

    We show that the surface states of pristine 3D topological insulators (TIs) are analogs of ferromagnetic half metals due to complete polarization of an emergent momentum independent pseudospin (SU(2)) degree of freedom on the surface. To put this claim on firm footing, we present results for TI surfaces perpendicular to the crystal growth axis, which clearly show that the tunneling conductance between two such TI surfaces of the same TI material is dominated by this half metallic behavior leading to physics reminiscent of a spin-valve. Further using the generalized tunnel magnetoresistance derived in this work we also study the tunneling current between arbitrary TI surfaces. We also perform a comprehensive study of the effect of all possible surface potentials allowed by time reversal symmetry on this spin-valve effect and show that it is robust against most of such potentials.

  16. Surface electrocardiogram and action potential in mice lacking urea transporter UT-B

    Institute of Scientific and Technical Information of China (English)

    MENG Yan; ZHAO ChunYan; ZHANG XueXin; ZHAO HuaShan; GUO LiRong; Lü Bin; ZHAO XueJian; YANG BaoXue

    2009-01-01

    UT-B is a urea transporter protein expressed in the kidney and in many non-renal tissues including erythrocytes, brain, heart, bladder and the testis. The objective of this study was to determine the phenotype of UT-B deletion in the heart. UT-B expression in the heart was studied in wild-type mice vs UT-B null mice by utilizing RT-PCR and Western blot. A surface electrocardiogram (ECG) recording (lead Ⅱ) was measured in wild-type mice and UT-B null mice at the ages of 6, 16 and 52 weeks. For the action potential recording, the ventricular myocytes of 16 w mice were isolated and recorded by float-ing microelectrode method. The sodium current was recorded by the patch clamp technique. RT-PCR and Western blot showed the UT-B expression in the heart of wild-type mice. No UT-B transcript and protein was found in UT-B null mice. The ECG recording showed that the P-R interval was significantly prolonged in UT-B null mice ((43.5±4.2), (45.5±6.9) and (43.8±7.6) ms at ages of 6, 16 and 52 weeks) vs wild-type mice ((38.6±2.9), (38.7±5.6) and (38.2±7.3) ms, P<0.05). The atrial ventricular heart block type Ⅱ and Ⅲ only appeared in the aging UT-B null mice (52 w old). The amplitude of action potential and Vmax decreased significantly in UT-B null mice ((92.17±10.56) and (101.89±9.54) mV/s) vs those in wild-type mice (vs (110.51±10.38) and (109.53±10.64) mV/s, P<0.05). The action potential duration at 50% and 90% (APD50 and APD90) was significantly prolonged in UT-B null mice ((123.83±11.17) and (195.43±16.41) ms) vs that in wild-type mice ((108.27±10.85) and (171.00±15.53) ms, P<0.05). The maximal sodium current decreased significantly in UT-B null mice (-8.80±0.92) nA vs that in wild-type mice ((-5.98±1.07) nA, P<0.05). These results provide the first evidence that UT-B deletion causes progressive heart block in mice.

  17. Surface electrocardiogram and action potential in mice lacking urea transporter UT-B

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    UT-B is a urea transporter protein expressed in the kidney and in many non-renal tissues including erythrocytes, brain, heart, bladder and the testis. The objective of this study was to determine the phenotype of UT-B deletion in the heart. UT-B expression in the heart was studied in wild-type mice vs UT-B null mice by utilizing RT-PCR and Western blot. A surface electrocardiogram (ECG) recording (lead II) was measured in wild-type mice and UT-B null mice at the ages of 6, 16 and 52 weeks. For the action potential recording, the ventricular myocytes of 16 w mice were isolated and recorded by floating microelectrode method. The sodium current was recorded by the patch clamp technique. RT-PCR and Western blot showed the UT-B expression in the heart of wild-type mice. No UT-B transcript and protein was found in UT-B null mice. The ECG recording showed that the P-R interval was significantly prolonged in UT-B null mice ((43.5 ± 4.2), (45.5 ± 6.9) and (43.8 ± 7.6) ms at ages of 6, 16 and 52 weeks) vs wild-type mice ((38.6 ± 2.9), (38.7 ± 5.6) and (38.2 ± 7.3) ms, P<0.05). The atrial ventricular heart block type II and III only appeared in the aging UT-B null mice (52 w old). The amplitude of action potential and Vmax decreased significantly in UT-B null mice ((92.17 ± 10.56) and (101.89 ± 9.54) mV/s) vs those in wild-type mice (vs (110.51 ± 10.38) and (109.53 ± 10.64) mV/s, P<0.05). The action potential duration at 50% and 90% (APD50 and APD90) was significantly prolonged in UT-B null mice ((123.83 ± 11.17) and (195.43 ± 16.41) ms) vs that in wild-type mice ((108.27 ± 10.85) and (171.00 ± 15.53) ms, P<0.05). The maximal sodium current decreased significantly in UT-B null mice (-8.80 ± 0.92) nA vs that in wild-type mice ((-5.98 ± 1.07) nA, P<0.05). These results provide the first evidence that UT-B deletion causes progressive heart block in mice.

  18. Distributions of clay minerals in surface sediments of the middle Bay of Bengal: Source and transport pattern

    Science.gov (United States)

    Li, Jingrui; Liu, Shengfa; Shi, Xuefa; Feng, Xiuli; Fang, Xisheng; Cao, Peng; Sun, Xingquan; Wenxing, Ye; Khokiattiwong, Somkiat; Kornkanitnan, Narumol

    2017-08-01

    The clay mineral contents in 110 surface sediment samples collected from the middle of the Bay of Bengal were analyzed by X-ray diffraction (XRD) to investigate the provenance and transport patterns. The illite content was highest, followed by chlorite, kaolinite and then smectite, with average weight percent distributions of 52%, 22%, 14% and 12%, respectively. Illite and chlorite had similar distribution pattern, with higher contents in the northern and central areas and lower contents in the southern area, whereas smectite showed the opposite distribution pattern. Kaolinite show no obvious higher or lower areas and the southern ;belt; was one of the highest content areas. Based on the spatial distribution characteristics and cluster analysis results, the study area can be classified into two provinces. Province I covers the southwestern area and contains high concentrations of illite and smectite sediments. Province II covers most sites and is also characterized by high concentrations of illite, but the weight percent of smectite is only half of that of province I. According to a quantitative estimate using end-member clay minerals contents, the relative contributions from the Himalayan source and the Indian source are 63% and 37% on average, respectively. Integrative analysis indicates that the hydrodynamic environment in the study area, especially the turbidity and surface monsoonal circulation, plays an important role in the spatial distribution and dispersal of the clay fraction in the sediments. The sediments in province I are mainly from the Indian source transported by the East Indian Coastal Current (EICC) and the surface monsoon circulation with minor contributions from the Himalayan source while the sediments in province II are mainly from the Himalayan source transported by turbidity and surface monsoonal circulation with little contribution from Indian river materials.

  19. Decadal Arctic surface atmosphere/ocean heat budgets and mass transport estimates from several atmospheric and oceanic reanalyses

    Science.gov (United States)

    Chepurin, gennaday; Carton, James

    2017-04-01

    The Arctic is undergoing dramatic changes associated with the loss of seasonal and permanent ice pack. By exposing the surface ocean to the atmosphere these changes dramatically increase surface exchange processes. In contrast, increases in freshwater and heat input decreases turbulent exchanges within the ocean. In this study we present results from an examination of changing ocean heat flux, storage, and transport during the 36 year period 1980-2015. To identify changes in the surface atmosphere we examine three atmospheric reanalyses: MERRA2, ERA-I, and JRA55. Significant differences in fluxes from these reanalyses arise due to the representation of clouds and water vapor. These differences provide an indication of the uncertainties in the historical record. Next we turn to the Simple Ocean Data Assimilation version 3 (SODA3) global ocean/sea ice reanalysis system to allow us to infer the full ocean circulation from the limited set of historical record of ocean observations. SODA3 has 10 km horizontal resolution in the Arctic and assimilates the full suite of historical marine temperature and salinity observations. To account for the uncertainties in atmospheric forcing, we repeat our analysis with each of the three atmospheric reanalyses. In the first part of the talk we review the climatological seasonal surface fluxes resulting from our reanalysis system, modified for consistency with the ocean observations, and the limits of what we can learn from the historical record. Next we compare the seasonal hydrography, heat, and mass transports with direct estimates from moorings. Finally we examine the impact on the Arctic climate of the changes in sea ice cover and variability and trends of ocean/sea ice heat storage and transport and their contributions to changes in the seasonal stratification of the Arctic Ocean.

  20. Lagrangian study of surface transport in the Kuroshio Extension area based on simulation of propagation of Fukushima-derived radionuclides

    CERN Document Server

    Prants, S V; Uleysky, M Yu

    2013-01-01

    Lagrangian approach is applied to study near-surface large-scale transport in the Kuroshio Extension area using a simulation with synthetic particles advected by AVISO altimetric velocity field. A material line technique is applied to find the origin of water masses in cold-core cyclonic rings pinched off from the jet in summer 2011. Tracking and Lagrangian maps provide the evidence of cross-jet transport. Fukushima derived caesium isotopes are used as Lagrangian tracers to study transport and mixing in the area a few months after the March of 2011 tsunami that caused a heavy damage of the Fukushima nuclear power plant (FNPP). Tracking maps are computed to trace the origin of water parcels with measured levels of Cs-134 and Cs-137 concentrations collected in two R/V cruises in June and July 2011 in the large area of the Northwest Pacific. It is shown that Lagrangian simulation is useful to finding the surface areas that are potentially dangerous due to the risk of radioactive contamination. The results of sim...

  1. Transport Properties and Surface Morphology Correlated Studies on Graphene Formed by Si Desorption of 6H-SiC

    Science.gov (United States)

    Roach, William; Beringer, Douglas; Skuza, Jonathan; Clavero, Cesar; Lukaszew, Rosa Alejandra

    2009-11-01

    Interest in graphene, a single layer of carbon atoms arranged in a hexagonal lattice, has increased in recent years due to exciting characteristics such as its predicted high mobility [1]. However, developing a method to produce graphene that is easily integrated into existing fabrication processes has proved difficult thus far. One promising method is high temperature annealing of 6H-SiC such that Si desorption occurs [2], although this method leads to graphene that exhibits lower mobility than predicted [3]. Thus, we have investigated the relationship between different growth conditions (i.e. annealing time and temperature), the resulting surface morphology and the transport properties of graphene films produced using this method. Raman spectroscopy, atomic force microscopy, and Van der Pauw Hall mobility measurements have been used to correlate the surface morphology to transport properties of graphene formed on SiC. Understanding the effect of growth conditions on the resulting transport properties will help optimize the fabrication of graphene for use in the next generation of electronic devices and other applications. [1] Novoselov et al., Science 306, 666 (2004). [2] C. Berger et al., J. Phys. Chem. B 108, 19912 (2004). [3] G. Gu et al., Appl. Phys. Lett. 90, 253507 (2007).

  2. Transonic unsteady airloads on an energy efficient transport wing with oscillating control surfaces

    Science.gov (United States)

    Sandford, M. C.; Ricketts, R. H.; Cazier, F. W., Jr.; Cunningham, H. J.

    1980-01-01

    An aspect ratio 10.8 supercritical wing with oscillating control surfaces is described. The wing is instrumental with 252 static orifices and 164 in situ dynamic pressure transducers for studying the effects of control surface deflection on steady and unsteady pressures at transonic speeds. Results from initial wind tunnel tests conducted in the Langley Transonic Dynamics Tunnel are discussed. Unsteady pressure results are presented for two trailing edge control surfaces oscillating separately at the design Mach number of 0.78. Some experimental results are compared with analytical results obtained by using linear lifting surface theory.

  3. Molecular dynamics study on mechanism of preformed particle gel transporting through nanopores: Surface chemistry and heterogeneity

    Science.gov (United States)

    Cui, Peng; Zhang, Heng; Ma, Ying; Hao, Qingquan; Liu, Gang; Sun, Jichao; Yuan, Shiling

    2017-10-01

    The translocation behavior of preformed particle gel (PPG) in porous media is crucial for its application in enhanced oil recovery. By means of non-equilibrium molecular dynamics simulation, the translocation mechanism of PPG confined in different silica nanopores were investigated. The influence of surface chemistry and chemical heterogeneity of silica nanopore on the translocation process was revealed. As the degree of surface hydroxylation increases and the heterogeneity decreases, the pulling force needed to drive PPG decreases. We infer that the nanopore's surface (i.e. surface chemistry and heterogeneity) affects the translocation of PPG indirectly by forming different hydration layers.

  4. Climatology of wintertime long-distance transport of surface-layer air masses arriving urban Beijing in 2001-2012

    Science.gov (United States)

    Chen, Bin; Xiang-De, XU

    2017-02-01

    In this study, the FLEXPART-WRF coupled modeling system is used to conduct 12-year Lagrangian modeling over Beijing, China, for the winters of 2001-2012. Based on large trajectory tracking ensembles, the long-range air transport properties, in terms of geographic source regions within the atmospheric planetary boundary layer (PBL) and large-scale ventilation, and its association with air quality levels were quantified from a climatological perspective. The results show the following: (1) The air masses residing in the near-surface layer over Beijing potentially originate from broader atmospheric boundary-layer regions, which cover vast areas with the backward tracking time elapsed. However, atmospheric transport from northeastern China and, to a lesser extent, from the surrounding regions of Beijing is important. (2) The evolution of air quality over Beijing is negatively correlated with large-scale ventilation conditions, particularly at a synoptic timescale. Thus, the simple but robust backward-trajectory ventilation (BV) index defined in this study could facilitate operational forecasting of severe air pollution events. (3) By comparison, the relatively short-range transport occurring over transport timescales of less than 3 days from southern and southeastern Beijing and its surrounding areas plays a vital role in the formation of severe air pollution events during the wintertime. (4) Additionally, an interannual trend analysis suggests that the geographic sources and ventilation conditions also changed, at least over the last decade, corresponding to the strength variability of the winter East Asian monsoon.

  5. Stability and transport of graphene oxide nanoparticles in groundwater and surface water

    Science.gov (United States)

    A transport study investigating the effects of natural organic matter (NOM) in the presence of monovalent (KCl) and divalent (CaCl2) salts was performed in a packed bed column. The electrophoretic mobility (EPM) and effective diameter of the graphene oxide nanoparticles (GONPs) were measured as a fu...

  6. Solute Transport of Negatively Charged Contrast Agents Across Articular Surface of Injured Cartilage.

    Science.gov (United States)

    Kokkonen, H T; Chin, H C; Töyräs, J; Jurvelin, J S; Quinn, T M

    2017-04-01

    Solute transport through the extracellular matrix (ECM) is crucial to chondrocyte metabolism. Cartilage injury affects solute transport in cartilage due to alterations in ECM structure and solute-matrix interactions. Therefore, cartilage injury may be detected by using contrast agent-based clinical imaging. In the present study, effects of mechanical injury on transport of negatively charged contrast agents in cartilage were characterized. Using cartilage plugs injured by mechanical compression protocol, effective partition coefficients and diffusion fluxes of iodine- and gadolinium-based contrast agents were measured using high resolution microCT imaging. For all contrast agents studied, effective diffusion fluxes increased significantly, particularly at early times during the diffusion process (38 and 33% increase after 4 min, P integrity in cartilage superficial zone. This study suggests that alterations in contrast agent diffusion flux, a non-equilibrium transport parameter, provides a more sensitive indicator for assessment of cartilage matrix integrity than partition coefficient and the equilibrium distribution of solute. These findings may help in developing clinical methods of contrast agent-based imaging to detect cartilage injury.

  7. 77 FR 10599 - Surface Transportation Project Delivery Pilot Program; Caltrans Audit Report

    Science.gov (United States)

    2012-02-22

    ...) Interviews with staff indicated a large staff turnover in certain Districts. The loss of experienced staff... agency staff at the U.S. Army Corps of Engineers, the U.S. Fish and Wildlife Service (FWS), the National... Transportation Systems Center; U.S. FWS. During the onsite audit, the audit team interviewed more than 60 staff...

  8. Single-electron transport driven by surface acoustic waves: Moving quantum dots versus short barriers

    DEFF Research Database (Denmark)

    Utko, Pawel; Hansen, Jørn Bindslev; Lindelof, Poul Erik;

    2007-01-01

    We have investigated the response of the acoustoelectric-current driven by a surface-acoustic wave through a quantum point contact in the closed-channel regime. Under proper conditions, the current develops plateaus at integer multiples of ef when the frequency f of the surface-acoustic wave or t...

  9. Flexible Surface Hopping Approach to Model the Crossover from Hopping to Band-like Transport in Organic Crystals.

    Science.gov (United States)

    Wang, Linjun; Beljonne, David

    2013-06-06

    Two distinct pictures are usually evoked when modeling charge transport in organic crystals, that is, band and hopping models, the signature of which is conveyed by a characteristic temperature dependence of mobility. Here, we present a novel flexible surface hopping approach compliant with general Hamiltonians that is able to grasp the crossover from hopping to band-like transport regimes. This approach is applied to solve a one-dimensional mixed quantum-classical model and to calculate the temperature dependence of charge mobility along with the degree of charge spatial localization. It is found that the roles of both local and nonlocal electron-phonon couplings strongly depend on the intrinsic charge localization strength.

  10. Nursing safety management of nosocomial transportation in postoperative critical patients%危重患者术后院内转运的护理安全管理

    Institute of Scientific and Technical Information of China (English)

    卢俊红; 王秀军

    2016-01-01

    Objective To retrospect the nosocomial transportation status of postoperative critical patients,summarize the complications,explore the problems of patient′s handover,so as to provide new thinking of guaranteeing nursing safety quality.Methods By clinical multicentric retrospective study method,1 625 cases of critical patients′nosocomial transportation status were analyzed in two hospitals,and the complications and handover were paid attention to count.Results During transportation,the incidence of complications were 56 cases with 3.4%,and inefficient handover was 39 cases with 2.4% in the ward;99.8%of patients can be transferred on time,but 0.2% of them delayed to transfer.Conclusions The operation is complicated in Neurosurgery Department and Department of Chest Surgery,but has strong influencing on patient′s nerve,circulatory and respiratory system which may find out the risk factors of complications.Thus, the nursing safety management of nosomial transportation must be paid attention to including effective doctor-nurse-patient information communication,sufficient risk assessment,necessary technique support and standard transportation process and handover regulation,in order to ensure nursing safety quality.%目的:通过回顾术后危重症患者院内转运情况,总结常见并发症,探讨患者交接问题,对保证护理安全质量提出新思考。方法采用临床多中心回顾性研究方法,对2所医院的1625例术后危重症患者院内转运情况进行分析,对并发症及交接情况进行重点统计。结果转运过程中发生并发症56例占3.4%,与病房交接不到位39例占2.4%;99.8%的患者按原计划转运,0.2%的患者延期转运。结论神经外科和胸外科手术复杂,对患者神经、循环及呼吸系统影响大,可能是出现并发症的危险因素。因此,术后危重症患者院内转运的护理安全质量必须得到重视,包括医、护、患间的有效

  11. Safety aspects of long-term dry interim storage of type-B spent fuel and HLW transport casks

    Energy Technology Data Exchange (ETDEWEB)

    Wolff, D.; Probst, U.; Voelzke, H.; Droste, B.; Roedel, R. [Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin (Germany)

    2004-07-01

    Based on the German decision to minimise transports of spent fuel casks between nuclear power plants, reprocessing plants and central storage facilities several on-site storage facilities have been licensed till the end of 2003. Because of the large amount of type-B transport casks which are going to be used for long-term interim storage the question of time limited type-B license maintenance during the storage period of up to 40 years has been discussed under different aspects. This paper describes present technical aspects of the discussion. A main aspect of transport cask qualification for interim storage is the long-term behaviour of the metallic seal lid system. Concerning this results from current experimental long-term tests with metallic ''Helicoflex''-seals in which pool water is enclosed are presented. The test series has been performed by the Federal Institute for Materials Research and Testing (BAM) on behalf of the Federal Office for Radiation Protection (BfS) since 2001. Finally, the paper presents a German concept for an authorities' and technical experts' exchange of experience, know-how and state of the art referring to cask dispatch in nuclear facilities. BAM has taken over a central role in this so-called ''co-ordinating institution for cask dispatching information'' (''KOBAF'') which contains an online data base and a technical working group meeting twice a year. The goal is to keep comparable technical standards for all nuclear sites and storage facilities which are going to load and dispatch casks of the same or similar types under the responsibility of different German state governments for the next decades.

  12. 77 FR 24560 - National Highway Traffic Safety Administration Electric Vehicle Safety Technical Symposium

    Science.gov (United States)

    2012-04-24

    ... National Highway Traffic Safety Administration Electric Vehicle Safety Technical Symposium AGENCY: National Highway Traffic Safety Administration (NHTSA), Department of Transportation (DOT). ACTION: Announcement of public symposium. SUMMARY: The National Highway Traffic Safety Administration (NHTSA) is announcing...

  13. Effect of Surface-optical Phonons on the Charge Transport in Wrap-gated Semiconducting Nanowire Field-effect Transistors

    Science.gov (United States)

    Konar, Aniruddha; Fang, Tian; Jena, Debdeep

    2010-03-01

    Surface phonons (SO-phonons) arise at the boundary of two different dielectric mediums. Though the effect of electron-surface phonon scattering on low-filed charge transport has been studied extensively for thin Si-MOSFET [1] and graphene [2], its effect on the 1D nanowire devices has not studied so far. Vibrating diploes in polar gate-dielectric induces a time-varying potential inside the nanowires. The frequencies of these time-varying fields have been calculated by implementing electrostatic boundary conditions at different interfaces of nanowire-dielectric-metal system. Our calculation shows that the electron-SO phonon interaction strength decays exponentially from the gate-nanowire interface towards the nanowire axis. Electron-SO phonon scattering rate has been calculated using Boltzmann transport equation under relaxation time approximation. We find that for thin nanowires (radius 1-20 nm), electron-SO phonon scattering rate is comparable to other dominant scattering mechanisms (such as impurity and bulk optical phonon scatterings) and reduces carrier mobility significantly. Calculating surface-phonon limited mobility of Si nanowires on various available common dielectrics, we have predicted the optimum choice of gate-dielectrics for nanowire-based electronic devices. [4pt] [1] M. V. Fischetti et. al J. Appl. Phys. 90 4581 (2001). [0pt] [2] A. Konar et. al. arXiv: 0902.0819.

  14. Comments on a paper tilted `The sea transport of vitrified high-level radioactive wastes: Unresolved safety issues`

    Energy Technology Data Exchange (ETDEWEB)

    Sprung, J.L.; McConnell, P.E.; Nigrey, P.J.; Ammerman, D.J. [and others

    1997-05-01

    The cited paper estimates the consequences that might occur should a purpose-built ship transporting Vitrified High Level Waste (VHLW) be involved in a severe collision that causes the VHLW canisters in one Type-B package to spill onto the floor of a major ocean fishing region. Release of radioactivity from VHLW glass logs, failure of elastomer cask seals, failure of VHLW canisters due to stress corrosion cracking (SCC), and the probabilities of the hypothesized accident scenario, of catastrophic cask failure, and of cask recovery from the sea are all discussed.

  15. Computer codes in nuclear safety, radiation transport and dosimetry; Les codes de calcul en radioprotection, radiophysique et dosimetrie

    Energy Technology Data Exchange (ETDEWEB)

    Bordy, J.M.; Kodeli, I.; Menard, St.; Bouchet, J.L.; Renard, F.; Martin, E.; Blazy, L.; Voros, S.; Bochud, F.; Laedermann, J.P.; Beaugelin, K.; Makovicka, L.; Quiot, A.; Vermeersch, F.; Roche, H.; Perrin, M.C.; Laye, F.; Bardies, M.; Struelens, L.; Vanhavere, F.; Gschwind, R.; Fernandez, F.; Quesne, B.; Fritsch, P.; Lamart, St.; Crovisier, Ph.; Leservot, A.; Antoni, R.; Huet, Ch.; Thiam, Ch.; Donadille, L.; Monfort, M.; Diop, Ch.; Ricard, M

    2006-07-01

    The purpose of this conference was to describe the present state of computer codes dedicated to radiation transport or radiation source assessment or dosimetry. The presentations have been parted into 2 sessions: 1) methodology and 2) uses in industrial or medical or research domains. It appears that 2 different calculation strategies are prevailing, both are based on preliminary Monte-Carlo calculations with data storage. First, quick simulations made from a database of particle histories built though a previous Monte-Carlo simulation and secondly, a neuronal approach involving a learning platform generated through a previous Monte-Carlo simulation. This document gathers the slides of the presentations.

  16. Turbulent momentum transport due to the beating between different tokamak flux surface shaping effects

    CERN Document Server

    Ball, Justin

    2016-01-01

    Introducing up-down asymmetry into the tokamak magnetic equilibria appears to be a feasible method to drive fast intrinsic toroidal rotation in future large devices. In this paper we investigate how the intrinsic momentum transport generated by up-down asymmetric shaping scales with the mode number of the shaping effects. Making use the gyrokinetic tilting symmetry (Ball et al (2016) Plasma Phys. Control. Fusion 58 045023), we study the effect of envelopes created by the beating of different high-order shaping effects. This reveals that the presence of an envelope can change the scaling of the momentum flux from exponentially small in the limit of large shaping mode number to just polynomially small. This enhancement of the momentum transport requires the envelope to be both up-down asymmetric and have a spatial scale on the order of the minor radius.

  17. Plasmonic Hot Electron Transport Driven Site-Specific Surface-Chemistry with Nanoscale Spatial Resolution

    CERN Document Server

    Cortés, Emiliano; Cambiasso, Javier; Jermyn, Adam S; Sundararaman, Ravishankar; Narang, Prineha; Schlücker, Sebastian; Maier, Stefan A

    2016-01-01

    Nanoscale localization of electromagnetic fields near metallic nanostructures underpins the fundamentals and applications of plasmonics. The unavoidable energy loss from plasmon decay, initially seen as a detriment, has now expanded the scope of plasmonic applications to exploit the generated hot carriers. However, quantitative understanding of the spatial localization of these hot carriers, akin to electromagnetic near-field maps, has been elusive. Here we spatially map hot-electron-driven reduction chemistry with 15 nanometre resolution as a function of time and electromagnetic field polarization for different plasmonic nanostructures. We combine experiments employing a six-electron photo-recycling process that modify the terminal group of a self-assembled monolayer on plasmonic silver nanoantennas, with theoretical predictions from first-principles calculations of non-equilibrium hot-carrier transport in these systems. The resulting localization of reactive regions, determined by hot carrier transport from...

  18. Turbulent momentum transport due to the beating between different tokamak flux surface shaping effects

    Science.gov (United States)

    Ball, Justin; Parra, Felix I.

    2017-02-01

    Introducing up-down asymmetry into the tokamak magnetic equilibria appears to be a feasible method to drive fast intrinsic toroidal rotation in future large devices. In this paper we investigate how the intrinsic momentum transport generated by up-down asymmetric shaping scales with the mode number of the shaping effects. Making use the gyrokinetic tilting symmetry (Ball et al 2016 Plasma Phys. Control. Fusion 58 045023), we study the effect of envelopes created by the beating of different high-order shaping effects. This reveals that the presence of an envelope can change the scaling of the momentum flux from exponentially small in the limit of large shaping mode number to just polynomially small. This enhancement of the momentum transport requires the envelope to be both up-down asymmetric and have a spatial scale on the order of the minor radius.

  19. Can clouds enhance long-range transport of low volatile, ionizable and surface-active chemicals?

    DEFF Research Database (Denmark)

    Franco, Antonio; Trapp, Stefan

    2011-01-01

    Atmospheric partitioning and transport of low volatile organic compounds is strongly influenced by the presence of water (e.g. clouds) and its deposition velocity (e.g. rainfall, snow). It was identified that the assumption of continuous rainfall underestimates the residence time and the transport...... substances. A modified version of the regional multimedia activity model for ionics MAMI, including twolayered atmosphere with atmospheric boundary layer (ABL) and lower/middle troposphere (LMT), interface partitioning, intermittent rainfall and variable cloud coverage was applied to a selection of ten low...... were run for a constant emission to the atmospheric boundary layer to identify key model inputs. The degradation rate, the duration of dry and wet periods and the parameters describing air-water bulk partitioning (KAW and T) and ionization (pKa and pH) determine the residence time in the ABL...

  20. New York state high-speed surface transportation study: Final report

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    In 1990, New York State Governor Mario M. Cuomo created an interagency task force under the leadership of Lt. Governor Stan Lundine to investigate the potential of high speed ground transportation (HSGT) systems. Building on information from previous agency activities, including consultant efforts contracted by the New York State Energy Research and Development Authority (NYSERDA), the New York State Thruway Authority (NYSTA), and in-house analyses performed by New York State Department of Transportation (NYSDOT), the task force focused on the corridor between New York City and the Niagara Frontier. In December 1991, NYSERDA issued a contract for a study of high speed ground transportation options for New York State. The study`s objective was to assess potential rights-of-way, ridership, energy and environmental impacts, economic benefits, capital, operating, and maintenance costs, and financial viability of HSGT systems. This study builds upon and supplements previous and on-going HSGT activities conducted by the members of the interagency task force. These activities include: Maglev Technical and Economic Feasibility Study (NYSERDA); Maglev Demonstration Site Investigation (NYSTA); and New York/Massachusetts High Speed Ground Transportation Study (NYSDOT). This study is intended to verify and refine previous information and analyses and provide supplemental information and insights to be used in determining if additional investigation and activities involving HSGT are desirable for New York State. This study evaluates HSGT technologies capable of speeds significantly higher than those achieved with the present rail system. Three HSGT categories are used in this study: incremental rail improvement, very high-speed rail, and Maglev.