WorldWideScience

Sample records for surface tension gradient

  1. A density gradient theory based method for surface tension calculations

    DEFF Research Database (Denmark)

    Liang, Xiaodong; Michelsen, Michael Locht; Kontogeorgis, Georgios

    2016-01-01

    The density gradient theory has been becoming a widely used framework for calculating surface tension, within which the same equation of state is used for the interface and bulk phases, because it is a theoretically sound, consistent and computationally affordable approach. Based on the observation...... that the optimal density path from the geometric mean density gradient theory passes the saddle point of the tangent plane distance to the bulk phases, we propose to estimate surface tension with an approximate density path profile that goes through this saddle point. The linear density gradient theory, which...... assumes linearly distributed densities between the two bulk phases, has also been investigated. Numerical problems do not occur with these density path profiles. These two approximation methods together with the full density gradient theory have been used to calculate the surface tension of various...

  2. The influence of gradients in surface tension on the mass transfer in gas liquid systems

    NARCIS (Netherlands)

    Klooster, Hubertus Willem van der

    1978-01-01

    In this investigation attention has been paid to the influence of surface tensions gradients on the performance of a packed column. From earlier investigations it is known that surface tensions have a considerable influence on the magnitude of the effective interfacial area. The work presented here

  3. Calculation of Surface Tensions of Polar Mixtures with a Simplified Gradient Theory Model

    DEFF Research Database (Denmark)

    Zuo, You-Xiang; Stenby, Erling Halfdan

    1996-01-01

    Key Words: Thermodynamics, Simplified Gradient Theory, Surface Tension, Equation of state, Influence Parameter.In this work, assuming that the number densities of each component in a mixture across the interface between the coexisting vapor and liquid phases are linearly distributed, we developed...... surface tensions of 34 binary mixtures with an overall average absolute deviation of 3.46%. The results show good agreement between the predicted and experimental surface tensions. Next, the SGT model was applied to correlate surface tensions of binary mixtures containing alcohols, water or/and glycerol...

  4. Calculation of Surface Tensions of Polar Mixtures with a Simplified Gradient Theory Model

    DEFF Research Database (Denmark)

    Zuo, You-Xiang; Stenby, Erling Halfdan

    1996-01-01

    Key Words: Thermodynamics, Simplified Gradient Theory, Surface Tension, Equation of state, Influence Parameter.In this work, assuming that the number densities of each component in a mixture across the interface between the coexisting vapor and liquid phases are linearly distributed, we developed...... a simplified gradient theory (SGT) model for computing surface tensions. With this model, it is not required to solve the time-consuming density profile equations of the gradient theory model. The SRK EOS was applied to calculate the properties of the homogeneous fluid. First, the SGT model was used to predict...

  5. Controlling the Motion of Ferrofluid Droplets Using Surface Tension Gradients and Magnetoviscous Pinning.

    Science.gov (United States)

    Ody, T; Panth, M; Sommers, A D; Eid, K F

    2016-07-12

    This work demonstrates the controlled motion and stopping of individual ferrofluid droplets due to a surface tension gradient and a uniform magnetic field. The surface tension gradients are created by patterning hydrophilic aluminum regions, shaped as wedges, on a hydrophobic copper surface. This pattern facilitates the spontaneous motion of water-based ferrofluid droplets down the length of the wedge toward the more hydrophilic aluminum end due to a net capillarity force created by the underlying surface wettability gradient. We observed that applying a magnetic field parallel to the surface tension gradient direction has little or no effect on the droplet's motion, while a moderate perpendicular magnetic field can stop the motion altogether effectively "pinning" the droplet. In the absence of the surface tension gradient, droplets elongate in the presence of a parallel field but do not travel. This control of the motion of individual droplets might lend itself to some biomedical and lab-on-a-chip applications. The directional dependence of the magnetoviscosity observed in this work is believed to be the consequence of the formation of nanoparticle chains in the fluid due to the existence of a minority of relatively larger magnetic particles.

  6. A collocation method for surface tension calculations with the density gradient theory

    DEFF Research Database (Denmark)

    Larsen, Peter Mahler; Maribo-Mogensen, Bjørn; Kontogeorgis, Georgios M.

    2016-01-01

    Surface tension calculations are important in many industrial applications and over a wide range of temperatures, pressures and compositions. Empirical parachor methods are not suitable over a wide condition range and the combined use of density gradient theory with equations of state has been...... proposed in literature. Often, many millions of calculations are required in the gradient theory methods, which is computationally very intensive. In this work, we have developed an algorithm to calculate surface tensions an order of magnitude faster than the existing methods, with no loss of accuracy...

  7. An adaptive finite element method for simulating surface tension with the gradient theory of fluid interfaces

    KAUST Repository

    Kou, Jisheng

    2014-01-01

    The gradient theory for the surface tension of simple fluids and mixtures is rigorously analyzed based on mathematical theory. The finite element approximation of surface tension is developed and analyzed, and moreover, an adaptive finite element method based on a physical-based estimator is proposed and it can be coupled efficiently with Newton\\'s method as well. The numerical tests are carried out both to verify the proposed theory and to demonstrate the efficiency of the proposed method. © 2013 Elsevier B.V. All rights reserved.

  8. Efficient numerical methods for simulating surface tension of multi-component mixtures with the gradient theory of fluid interfaces

    KAUST Repository

    Kou, Jisheng

    2015-08-01

    Surface tension significantly impacts subsurface flow and transport, and it is the main cause of capillary effect, a major immiscible two-phase flow mechanism for systems with a strong wettability preference. In this paper, we consider the numerical simulation of the surface tension of multi-component mixtures with the gradient theory of fluid interfaces. Major numerical challenges include that the system of the Euler-Lagrange equations is solved on the infinite interval and the coefficient matrix is not positive definite. We construct a linear transformation to reduce the Euler-Lagrange equations, and naturally introduce a path function, which is proven to be a monotonic function of the spatial coordinate variable. By using the linear transformation and the path function, we overcome the above difficulties and develop the efficient methods for calculating the interface and its interior compositions. Moreover, the computation of the surface tension is also simplified. The proposed methods do not need to solve the differential equation system, and they are easy to be implemented in practical applications. Numerical examples are tested to verify the efficiency of the proposed methods. © 2014 Elsevier B.V.

  9. Surface Tension of Spacetime

    Science.gov (United States)

    Perko, Howard

    2017-01-01

    Concepts from physical chemistry and more specifically surface tension are introduced to spacetime. Lagrangian equations of motion for membranes of curved spacetime manifold are derived. The equations of motion in spatial directions are dispersion equations and can be rearranged to Schrodinger's equation where Plank's constant is related to membrane elastic modulus. The equation of motion in the time-direction has two immediately recognizable solutions: electromagnetic waves and corpuscles. The corpuscular membrane solution can assume different genus depending on quantized amounts of surface energy. A metric tensor that relates empty flat spacetime to energetic curved spacetime is found that satisfies general relativity. Application of the surface tension to quantum electrodynamics and implications for quantum chromodynamics are discussed. Although much work remains, it is suggested that spacetime surface tension may provide a classical explanation that combines general relativity with field theories in quantum mechanics and atomic particle physics.

  10. Density gradient theory combined with the PC-SAFT equation of state used for modeling the surface tension of associating systems

    Directory of Open Access Journals (Sweden)

    Vinš Václav

    2014-03-01

    Full Text Available The density gradient theory (GT combined with a SAFT-type (Statistical Associating Fluid Theory equation of state has been used for modeling the surface tension of associating fluids represented by a series of six alkanols ranging from methanol to 1-pentanol. The effect of nonzero dipole moment of the selected alkanols on the predicted surface tension was investigated in this study. Results of the GT + non-polar Perturbed Chain (PC SAFT equation of state were compared to predictions of GT combined with the PC-polar-SAFT, i.e. PCP-SAFT, equation. Both GT + PC-SAFT and GT + PCP-SAFT give reasonable prediction of the surface tension for pure alkanols. Results of both models are comparable as no significant difference in the modeled saturation properties and in the predicted surface tension using GT was found. Consideration of dipolar molecules of selected alkanols using PCP-SAFT had only minor effect on the predicted properties compared to the non-polar PC-SAFT model.

  11. Analysis of effect of temperature gradients on surface-tension phenomena in gas-tungsten-arc welds

    Energy Technology Data Exchange (ETDEWEB)

    Lee, H.A.; Chien, P.S.J.

    1982-10-01

    Fluid motion directed by surface tension is considered as a contributor to heat penetration in a weld pool. The potential phenomena at the gas-liquid interface were analyzed, and the dependence of surface motion on temperature in the gas-tungsten-arc (GTA) welding process was examined. An existing heat-transfer model was used and was able to predict weld size to +- 50% of the actual value. A momentum-transfer equation was derived by considering the contribution of Lorentz force. The momentum boundary condition was developed and was able to predict the Marangoni effect. The magnitude of surface-tension-driven force is comparable to the gravitational force on one gram. An empirical approach was proposed to couple heat-transfer and momentum-transfer phenomena. A dimensional analysis identified the pertinent dimensionless groups as Reynolds, Weber, Froude, Peclet, and Power numbers and a dimensionless velocity. A simplified form of the correction was developed by combining dimensionless groups to yield a correlation with the Bond, Prandtl, and modified power numbers. Future experimental work was proposed to test the functionality of the dimensionless groups.

  12. Analysis of effect of temperature gradients on surface-tension phenomena in gas-tungsten-arc welds

    Energy Technology Data Exchange (ETDEWEB)

    Lee, H.A.; Chien, P.S.J.

    1982-10-01

    Fluid motion directed by surface tension is considered as a contributor to heat penetration in a weld pool. The potential phenomena at the gas-liquid interface were analyzed, and the dependence of surface motion on temperature in the gas-tungsten-arc (GTA) welding process was examined. An existing heat-transfer model was used and was able to predict weld size to +- 50% of the actual value. A momentum-transfer equation was derived by considering the contribution of Lorentz force. The momentum boundary condition was developed and was able to predict the Marangoni effect. The magnitude of surface-tension-driven force is comparable to the gravitational force on one gram. An empirical approach was proposed to couple heat-transfer and momentum-transfer phenomena. A dimensional analysis identified the pertinent dimensionless groups as Reynolds, Weber, Froude, Peclet, and Power numbers and a dimensionless velocity. A simplified form of the correction was developed by combining dimensionless groups to yield a correlation with the Bond, Prandtl, and modified power numbers. Future experimental work was proposed to test the functionality of the dimensionless groups.

  13. Surface and interfacial tension measurement, theory, and applications

    CERN Document Server

    Hartland, Stanley

    2004-01-01

    This edited volume offers complete coverage of the latest theoretical, experimental, and computer-based data as summarized by leading international researchers. It promotes full understanding of the physical phenomena and mechanisms at work in surface and interfacial tensions and gradients, their direct impact on interface shape and movement, and their significance to numerous applications. Assessing methods for the accurate measurement of surface tension, interfacial tension, and contact angles, Surface and Interfacial Tension presents modern simulations of complex interfacial motions, such a

  14. Surface Tension of Binary Mixtures Including Polar Components Modeled by the Density Gradient Theory Combined with the PC-SAFT Equation of State

    Science.gov (United States)

    Vinš, Václav; Planková, Barbora; Hrubý, Jan

    2013-05-01

    In this study, the Cahn-Hilliard density gradient theory (GT) is used for predicting the surface tension of various binary mixtures at relatively wide temperature ranges and for testing the application of the GT for predictions of homogeneous nucleation. The GT was combined with two physically based equations of state (EoS), namely the perturbed-chain (PC) statistical associating fluid theory (SAFT) and its modification for polar substances the perturbed-chain polar (PCP) SAFT. The GT applied to the planar phase interface was employed to predict the interfacial tension for various quadrupolar (CO2 and benzene) and dipolar (difluoromethane, i.e., R32; pentafluoroethane, i.e., R125; and 1,1,1,2-tetrafluoroethane, i.e., R134a) substances and for five binary mixtures including polar components ( n-decane + CO2, benzene + CO2, R32 + R125, R32 + R134a, R134a + R125). The PCP-SAFT EoS combined with the GT provides more accurate results for both the quadrupolar and dipolar substances than the original PC-SAFT EoS. Besides the planar phase interface, the GT was also applied to the spherical phase interface simulating a critical cluster occurring in homogeneous nucleation of droplets. Carbon dioxide was considered, because it has a relatively high quadrupole moment and because of its relevance to natural gas processing. Application of the PCP-SAFT EoS provides a significant improvement compared to the PC-SAFT EoS, and it is clearly superior to the classical cubic Peng-Robinson EoS, which is still used for modeling droplet nucleation.

  15. Laser textured surface gradients

    Science.gov (United States)

    Ta, Van Duong; Dunn, Andrew; Wasley, Thomas J.; Li, Ji; Kay, Robert W.; Stringer, Jonathan; Smith, Patrick J.; Esenturk, Emre; Connaughton, Colm; Shephard, Jonathan D.

    2016-05-01

    This work demonstrates a novel technique for fabricating surfaces with roughness and wettability gradients and their subsequent applications for chemical sensors. Surface roughness gradients on brass sheets are obtained directly by nanosecond laser texturing. When these structured surfaces are exposed to air, their wettability decreases with time (up to 20 days) achieving both spatial and temporal wettability gradients. The surfaces are responsive to organic solvents. Contact angles of a series of dilute isopropanol solutions decay exponentially with concentration. In particular, a fall of 132° in contact angle is observed on a surface gradient, one order of magnitude higher than the 14° observed for the unprocessed surface, when the isopropanol concentration increased from 0 to 15.6 wt%. As the wettability changes gradually over the surface, contact angle also changes correspondingly. This effect offers multi-sensitivity at different zones on the surface and is useful for accurate measurement of chemical concentration.

  16. Gradient induced liquid motion on laser structured black Si surfaces

    Science.gov (United States)

    Paradisanos, I.; Fotakis, C.; Anastasiadis, S. H.; Stratakis, E.

    2015-09-01

    This letter reports on the femtosecond laser fabrication of gradient-wettability micro/nano-patterns on Si surfaces. The dynamics of directional droplet spreading on the surface tension gradients developed is systematically investigated and discussed. It is shown that microdroplets on the patterned surfaces spread at a maximum speed of 505 mm/s, which is the highest velocity demonstrated so far for liquid spreading on a surface tension gradient in ambient conditions. The application of the proposed laser patterning technique for the precise fabrication of surface tension gradients for open microfluidic systems, liquid management in fuel cells, and drug delivery is envisaged.

  17. Gradient induced liquid motion on laser structured black Si surfaces

    CERN Document Server

    Paradisanos, I; Anastasiadis, S H; Stratakis, E

    2015-01-01

    This letter reports on the femtosecond laser fabrication of gradient-wettability micro/nano- patterns on Si surfaces. The dynamics of directional droplet spreading on the surface tension gradients developed is systematically investigated and discussed. It is shown that microdroplets on the patterned surfaces spread at a maximum speed of 505 mm/sec, that is the highest velocity demonstrated so far for liquid spreading on a surface tension gradient in ambient conditions. The application of the proposed laser patterning technique for the precise fabrication of surface tension gradients for open microfluidic systems, liquid management in fuel cells and drug delivery is envisaged.

  18. Introducing surface tension to spacetime

    Science.gov (United States)

    Perko, H. A.

    2017-05-01

    Concepts from physical chemistry of surfaces and surface tension are applied to spacetime. More specifically, spacetime is modeled as a spatial fluid continuum bound together by a multi-dimensional membrane of time. A metric tensor that relates empty flat spacetime to energetic curved spacetime is found. Equations of motion for an infinitesimal unit of spacetime are derived. The equation of motion in a time-like direction is a Klein-Gordon type equation. The equations of motion in space-like directions take the form of Schrodinger’s equation where Plank’s constant is related to membrane elastic modulus. Although much work remains, it is suggested that the spacetime surface tension may serve as a mechanical model for many phenomena in quantum mechanics and atomic particle physics.

  19. Strain gradient effects in surface roughening

    DEFF Research Database (Denmark)

    Borg, Ulrik; Fleck, N.A.

    2007-01-01

    A thin aluminium sheet comprising of large polycrystals is pulled in uniaxial tension and the resulting surface profile is measured in a scanning electron microscope. The surface profile near the grain boundaries reveals a local deformation pattern of width of a few micrometres and is strong...... evidence for strain gradient effects. Numerical analyses of a bicrystal undergoing in-plane tensile deformation are also studied using a strain gradient crystal plasticity theory and also by using a strain gradient plasticity theory for an isotropic solid. Both theories include an internal material length...

  20. Droplet Motion on a Shape Gradient Surface.

    Science.gov (United States)

    Zheng, Yanfen; Cheng, Jiang; Zhou, Cailong; Xing, Haiting; Wen, Xiufang; Pi, Pihui; Xu, Shouping

    2017-05-02

    We demonstrate a facile method to induce water droplet motion on an wedge-shaped superhydrophobic copper surface combining with a poly(dimethylsiloxane) (PDMS) oil layer on it. The unbalanced interfacial tension from the shape gradient offers the actuating force. The superhydrophobicity critically eliminates the droplet contact line pinning and the slippery PDMS oil layer lubricates the droplet motion, which makes the droplet move easily. The maximum velocity and furthest position of droplet motion were recorded and found to be influenced by the gradient angle. The mechanism of droplet motion on the shape gradient surface is systematically discussed, and the theoretical model analysis is well matched with the experimental results.

  1. Axelrod's Model with Surface Tension

    CERN Document Server

    Pace, Bruno

    2012-01-01

    In this work we propose a subtle change in Axelrod's model for the dissemination of culture. The mechanism consists of excluding non-interacting neighbours from the set of neighbours out of which an agent is drawn for potential cultural interactions. Although the alteration proposed does not alter topologically the configuration space, it yields significant qualitative changes, specifically the emergence of surface tension, driving the system in some cases to metastable states. The transient behaviour is considerably richer, and cultural regions have become stable leading to the formation of different spatio-temporal structures. A new metastable "glassy" phase emerges between the globalised phase and the polarised, multicultural phase.

  2. Energy conversion by surface-tension driven charge separation

    CERN Document Server

    Pini, Cesare; Dietzel, Mathias

    2016-01-01

    In this work, the shear-induced electrokinetic streaming potential present in free-surface electrolytic flows subjected to a gradient in surface tension is assessed. Firstly, for a Couette flow with fully resolved electric double layer (EDL), the streaming potential per surface stress as a function of the Debye parameter and surface potential is analyzed. By contrast to the Smoluchowski limit in pressure-driven channel flow, the shear-induced streaming potential vanishes for increasing Debye parameter (infinitely thin EDL), unless the free surface contains (induced) surface charge or the flow at the charged, solid wall is permitted to slip. Secondly, a technical realization of surface-tension induced streaming is proposed, with surface stress acting on the free (slipping) surfaces of a micro-structured, superhydrophobic wall. The streaming potential is analyzed with respect to the slip parameter and surface charge. Finally, the surface tension is assumed to vary with temperature (thermocapillarity) or with su...

  3. Surface tension profiles in vertical soap films

    CERN Document Server

    Adami, N

    2013-01-01

    Surface tension profiles in vertical soap films are experimentally investigated. Measurements are performed introducing deformable elastic objets in the films. The shape adopted by those objects set in the film can be related to the surface tension value at a given vertical position by numerical solving of adapted elasticity equations. We show that the observed dependency of the surface tension versus the vertical position in the soap film can be reproduced by simple modeling taking into account film thickness measurements.

  4. On Surface Tension for Compact Stars

    Indian Academy of Sciences (India)

    R. Sharma; S. D. Maharaj

    2007-06-01

    In an earlier analysis it was demonstrated that general relativity gives higher values of surface tension in strange stars with quark matter than neutron stars. We generate the modified Tolman–Oppenheimer–Volkoff equation to incorporate anisotropic matter and use this to show that pressure anisotropy provides for a wide range of behaviour in the surface tension than is the case with isotropic pressures. In particular, it is possible that anisotropy drastically decreases the value of the surface tension.

  5. Surface Tension Calculation of Undercooled Alloys

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Based on the Butler equation and extrapolated thermodynamic data of undercooled alloys from those of liquid stable alloys, a method for surface tension calculation of undercooled alloys is proposed. The surface tensions of liquid stable and undercooled Ni-Cu (xNi=0.42) and Ni-Fe (xNi=0.3 and 0.7) alloys are calculated using STCBE (Surface Tension Calculation based on Butler Equation) program. The agreement between calculated values and experimental data is good enough, and the temperature dependence of the surface tension can be reasonable down to 150-200 K under the liquid temperature of the alloys.

  6. Tunable Superomniphobic Surfaces for Sorting Droplets by Surface Tension

    Science.gov (United States)

    Movafaghi, Sanli; Wang, Wei; Metzger, Ari; Williams, Desiree; Williams, John; Kota, Arun

    2016-11-01

    Manipulation of liquid droplets on super-repellent surfaces (i.e., surfaces that are extremely repellent to liquids) has been widely studied because droplets exhibit high mobility on these surfaces due to the ultra-low adhesion, which leads to minimal sample loss and contamination. Although droplet manipulation has been demonstrated using electric fields, magnetic fields, guiding tracks and wettability gradients, to the best of our knowledge, there are no reports of droplet manipulation methods that can sort droplets by surface tension on super-repellent surfaces. In this work, we utilized tunable superomniphobic surfaces (i.e., surfaces that are extremely repellent to virtually all liquids) to develop a simple device with precisely tailored solid surface energy domains that, for the first time, can sort droplets by surface tension. Droplet sorting occurs on our device entirely due to a balance between the work done by gravity and the work expended due to adhesion, without the need for any external energy input. Our device can be fabricated easily in a short time and is particularly useful for in-the-field and on-the-go operations, where complex analysis equipment is unavailable. We envision that our methodology for droplet sorting will enable inexpensive and energy-efficient analytical devices for personalized point-of-care diagnostic platforms and lab-on-a-chip systems.

  7. The surface tension of liquid gallium

    Science.gov (United States)

    Hardy, S. C.

    1985-01-01

    The surface tension of liquid gallium has been measured using the sessile drop technique in an Auger spectrometer. The experimental method is described. The surface tension in mJ/sq m is found to decrease linearly with increasing temperature and may be represented as 708-0.66(T-29.8), where T is the temperature in centigrade. This result is of interest because gallium has been suggested as a model fluid for Marangoni flow experiments. In addition, the surface tension is of technological significance in the processing of compound semiconductors involving gallium.

  8. Surface tension profiles in vertical soap films

    Science.gov (United States)

    Adami, N.; Caps, H.

    2015-01-01

    Surface tension profiles in vertical soap films are experimentally investigated. Measurements are performed by introducing deformable elastic objets in the films. The shape adopted by those objects once set in the film is related to the surface tension value at a given vertical position by numerically solving the adapted elasticity equations. We show that the observed dependency of the surface tension versus the vertical position is predicted by simple modeling that takes into account the mechanical equilibrium of the films coupled to previous thickness measurements.

  9. The Dynamic Surface Tension of Water.

    Science.gov (United States)

    Hauner, Ines M; Deblais, Antoine; Beattie, James K; Kellay, Hamid; Bonn, Daniel

    2017-03-23

    The surface tension of water is an important parameter for many biological or industrial processes, and roughly a factor of 3 higher than that of nonpolar liquids such as oils, which is usually attributed to hydrogen bonding and dipolar interactions. Here we show by studying the formation of water drops that the surface tension of a freshly created water surface is even higher (∼90 mN m(-1)) than under equilibrium conditions (∼72 mN m(-1)) with a relaxation process occurring on a long time scale (∼1 ms). Dynamic adsorption effects of protons or hydroxides may be at the origin of this dynamic surface tension. However, changing the pH does not significantly change the dynamic surface tension. It also seems unlikely that hydrogen bonding or dipole orientation effects play any role at the relatively long time scale probed in the experiments.

  10. Surface tension effects in breaking wave noise.

    Science.gov (United States)

    Deane, Grant B

    2012-08-01

    The role of surface active materials in the sea surface microlayer on the production of underwater noise by breaking waves is considered. Wave noise is assumed to be generated by bubbles formed within actively breaking whitecaps, driven into breathing mode oscillation at the moment of their formation by non-equilibrium, surface tension forces. Two significant effects associated with surface tension are identified-a reduction in low frequency noise (bubbles by fluid turbulence within the whitecap and a reduction in overall noise level due to a decrease in the excitation amplitude of bubbles associated with reduced surface tension. The impact of the latter effect on the accuracy of Weather Observations Through Ambient Noise estimates of wind speed is assessed and generally found to be less than ±1 m s(-1) for wind speeds less than 10 m s(-1) and typical values of surfactant film pressure within sea slicks.

  11. Statistical Mechanics of Multilayer Sorption: Surface Tension.

    Science.gov (United States)

    Wexler, Anthony S; Dutcher, Cari S

    2013-05-16

    Mathematical models of surface tension as a function of solute concentration are needed for predicting the behavior of surface processes relevant to the environment, biology, and industry. Current aqueous surface tension-activity models capture either solutions of electrolytes or those of nonelectrolytes, but a single equation has not yet been found that represents both over the full range of compositions. In prior work, we developed an accurate model of the activity-concentration relationship in solutions over the full range of compositions by extending the BET (Brunauer, Emmett, Teller) and GAB (Guggenheim, Anderson, de Boer) isotherms to multiple monolayers of solvent molecules sorbed to solutes. Here, we employ similar statistical mechanical tools to develop a simple equation for the surface tension-activity relationship that differs remarkably from prior formulations in that it (1) works equally well for nonelectrolyte and electrolyte solutes and (2) is accurate over the full range of concentrations from pure solvent to pure solute.

  12. Surface-tension properties of hyaluronic Acid.

    Science.gov (United States)

    Knepper, P A; Covici, S; Fadel, J R; Mayanil, C S; Ritch, R

    1995-06-01

    The maintenance of flow channels in the trabecular meshwork is dependent, in part, on the patency of the trabecular spaces. Because the amount of hyaluronic acid decreases in the trabecular meshwork of patients with primary open-angle glaucoma, a change in surface tension may be one of the effects of hyaluronic acid on aqueous outflow. The surface-active properties of hyaluronic acid (concentration of 0.156-2.5 mg/ml; molecular weights of 100,000, 500,000, and 4,000,000) in deionized water, Ringer's lactate, Ringer's lactate plus 0.06 mg/ml bovine serum albumin, and mock aqueous solution were tested using the drop volume method. At a hyaluronic acid concentration of 0.312 mg/ml, surface tension decreased; at higher concentrations, a further decrease in surface tension was observed. In the presence of Ringer's lactate, the 100,000-MW hyaluronic acid was more active than the 4,000,000-MW hyaluronic acid. In the presence of Ringer's lactate plus bovine serum albumin or mock aqueous solution, the influence of surface tension of the 100,000-MW hyaluronic acid was moderated: with lower hyaluronic acid concentrations, the decline in surface tension was more than with Ringer's lactate, but with higher hyaluronic acid concentrations, the decline in surface tension was less than with Ringer's lactate. At high concentration, hyaluronic acid behaves like a non-Newtonian fluid, becomes more viscous, and may act to "seal" the trabecular space. The results of this study indicate that hyaluronic acid possesses surface-active properties, which is just one of several properties of hyaluronic acid that may influence aqueous outflow resistance.

  13. Dynamic Surface Tensions of Fluorous Surfactant Solutions

    Institute of Scientific and Technical Information of China (English)

    高艳安; 侯万国; 王仲妮; 李干佐; 韩布兴; 张高勇; 吕锋锋

    2005-01-01

    Dynamic surface properties of aqueous solutions of cationic fluorous surfactant CF3CF2CF20(CF(CF3)CF2O)2CF(CF3)CONH(CHE)3N+(C2H5)2CH3I- (abbrev. FC-4 ) were reported. The critical micelle concentration (cmc)(3.6×10-5 mol/L) and equilibdum surface tensions γeq were measured by Krtlss K12 tension apparatus. Dynamic surface tension γ(t) was measured in the range of 15 ms to 200 s using the MBP tensiometer. The surface excess Γ,as a function of concentration, was obtained from equilibrium tensiometry using the Gibbs equation. Data from these experiments were combined to analyze the γ(t) decays according to the asymptotic Ward and Tordai equation.The results show that at the initial adsorption stage, the dynamic surface tension data were all consistent with this diffusion-controlled mechanism, and at the end of the adsorption process, there were some evidences for an adsorption barrier, suggesting a mixed diffusion-controlled adsorption mechanism. Using measured quantities, the barrier strength was estimated as between 25 and 35 kJ/mol at 25℃. The surface pressure plays an important role in contributing to the barrier.

  14. Surface tension of evaporating nanofluid droplets

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Ruey-Hung [Univ. of Central Florida, Orlando, FL (United States); Phuoc, Tran X. [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Martello, Donald [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States)

    2011-05-01

    Measurements of nanofluid surface tension were made using the pendant droplet method. Three different types of nanoparticles were used - laponite, silver and Fe2O3 - with de-ionized water (DW) as the base fluid. The reported results focus on the following categories; (1) because some nanoparticles require surfactants to form stable colloids, the individual effects of the surfactant and the particles were investigated; (2) due to evaporation of the pendant droplet, the particle concentration increases, affecting the apparent surface tension; (3) because of the evaporation process, a hysteresis was found where the evaporating droplet can only achieve lower values of surface tension than that of nanofluids at the same prepared concentrations: and (4) the Stefan equation relating the apparent surface tension and heat of evaporation was found to be inapplicable for nanofluids investigated. Comparisons with findings for sessile droplets are also discussed, pointing to additional effects of nanoparticles other than the non-equilibrium evaporation process.

  15. Surface gradients under electrochemical control

    NARCIS (Netherlands)

    Krabbenborg, Sven Olle

    2014-01-01

    Gradients are systems in which the physicochemical properties of a solution and/or surface change gradually in space and/or time. They are used for a myriad of technological and biological applications, for example for high-throughput screening, or for the investigation of biological systems. The de

  16. Surface Tension Driven Convection Experiment Completed

    Science.gov (United States)

    Jacobson, Thomas P.; Sedlak, Deborah A.

    1997-01-01

    The Surface Tension Driven Convection Experiment (STDCE) was designed to study basic fluid mechanics and heat transfer on thermocapillary flows generated by temperature variations along the free surfaces of liquids in microgravity. STDCE first flew on the USML-1 mission in July 1992 and was rebuilt for the USML-2 mission that was launched in October 1995. This was a collaborative project with principal investigators from Case Western Reserve University (CWRU), Professors Simon Ostrach and Yasuhiro Kamotani, along with a team from the NASA Lewis Research Center composed of civil servants and contractors from Aerospace Design & Fabrication, Inc. (ADF), Analex, and NYMA, Inc.

  17. Dropwise Condensation of Low Surface Tension Fluids on Omniphobic Surfaces

    Science.gov (United States)

    Rykaczewski, Konrad; Paxson, Adam T.; Staymates, Matthew; Walker, Marlon L.; Sun, Xiaoda; Anand, Sushant; Srinivasan, Siddarth; McKinley, Gareth H.; Chinn, Jeff; Scott, John Henry J.; Varanasi, Kripa K.

    2014-03-01

    Compared to the significant body of work devoted to surface engineering for promoting dropwise condensation heat transfer of steam, much less attention has been dedicated to fluids with lower interfacial tension. A vast array of low-surface tension fluids such as hydrocarbons, cryogens, and fluorinated refrigerants are used in a number of industrial applications, and the development of passive means for increasing their condensation heat transfer coefficients has potential for significant efficiency enhancements. Here we investigate condensation behavior of a variety of liquids with surface tensions in the range of 12 to 28 mN/m on three types of omniphobic surfaces: smooth oleophobic, re-entrant superomniphobic, and lubricant-impregnated surfaces. We demonstrate that although smooth oleophobic and lubricant-impregnated surfaces can promote dropwise condensation of the majority of these fluids, re-entrant omniphobic surfaces became flooded and reverted to filmwise condensation. We also demonstrate that on the lubricant-impregnated surfaces, the choice of lubricant and underlying surface texture play a crucial role in stabilizing the lubricant and reducing pinning of the condensate. With properly engineered surfaces to promote dropwise condensation of low-surface tension fluids, we demonstrate a four to eight-fold improvement in the heat transfer coefficient.

  18. A Linear Gradient Theory Model for Calculating Interfacial Tensions of Mixtures

    DEFF Research Database (Denmark)

    Zou, You-Xiang; Stenby, Erling Halfdan

    1996-01-01

    In this research work, we assumed that the densities of each component in a mixture are linearly distributed across the interface between the coexisting vapor and liquid phases, and we developed a linear gradient theory model for computing interfacial tensions of mixtures, especially mixtures...... with proper scaling behavior at the critical point is at least required.Key words: linear gradient theory; interfacial tension; equation of state; influence parameter; density profile....

  19. Steady periodic gravity waves with surface tension

    CERN Document Server

    Walsh, Samuel

    2009-01-01

    In this paper we consider two-dimensional, stratified, steady water waves propagating over an impermeable flat bed and with a free surface. The motion is assumed to be driven by capillarity (that is, surface tension) on the surface and a gravitational force acting on the body of the fluid. We prove the existence of global continua of classical solutions that are periodic and traveling. This is accomplished by first constructing a 1-parameter family of laminar flow solutions, $\\mathcal{T}$, then applying bifurcation theory methods to obtain local curves of small amplitude solutions branching from $\\mathcal{T}$ at an eigenvalue of the linearized problem. Each solution curve is then continued globally by means of a degree theoretic theorem in the spirit of Rabinowitz. Finally, we complement the degree theoretic picture by proving an alternate global bifurcation theorem via the analytic continuation method of Dancer.

  20. Theoretical and experimental study on surface tension and dynamic surface tension of aqueous lithium bromide and water with additive

    Institute of Scientific and Technical Information of China (English)

    程文龙; 陈则韶; 秋泽淳; 胡芃; 柏木孝夫

    2003-01-01

    The surface tensions of water and aqueous lithium bromide (LiBr) with 2-ethyl-1-hexa- nol (2EH) and 1-octanol were measured using Wilhelmy plate method, and the oscillation of surface tension under the open condition for LiBr solution was observed. The dynamic surface tensions of water and LiBr solution in the presence of the 2EH and 1-octanol vapor were measured in this paper. The results showed that the additives vapor could obviously affect surface tension. For water, the dynamic surface tension was also affected by the mass of the tested liquid; however, for LiBr solution, the dynamic surface tension was not related to the mass of the tested solution. According to the experimental results, the hypothesis that surface tension varies linearly with the surface excess concentration is advanced, which could overcome the limit of Gibbs equation. The equations of surface absorption and desorption are modified, the units of the adsorption coefficient and desorption coefficient are unified; the effects of the liquid and vapor of additive on the surface tension are unified; the theoretical relations of the static surface tension and dynamic surface tension with the relative contents of the liquid and vapor of additive are obtained under the combined actions of them; the theoretical equations are validated by the experiments results.

  1. Surface tension propulsion of fungal spores.

    Science.gov (United States)

    Noblin, Xavier; Yang, Sylvia; Dumais, Jacques

    2009-09-01

    Most basidiomycete fungi actively eject their spores. The process begins with the condensation of a water droplet at the base of the spore. The fusion of the droplet onto the spore creates a momentum that propels the spore forward. The use of surface tension for spore ejection offers a new paradigm to perform work at small length scales. However, this mechanism of force generation remains poorly understood. To elucidate how fungal spores make effective use of surface tension, we performed a detailed mechanical analysis of the three stages of spore ejection: the transfer of energy from the drop to the spore, the work of fracture required to release the spore from its supporting structure and the kinetic energy of the spore after ejection. High-speed video imaging of spore ejection in Auricularia auricula and Sporobolomyces yeasts revealed that drop coalescence takes place over a short distance ( approximately 5 microm) and energy transfer is completed in less than 4 mus. Based on these observations, we developed an explicit relation for the conversion of surface energy into kinetic energy during the coalescence process. The relation was validated with a simple artificial system and shown to predict the initial spore velocity accurately (predicted velocity: 1.2 m s(-1); observed velocity: 0.8 m s(-1) for A. auricula). Using calibrated microcantilevers, we also demonstrate that the work required to detach the spore from the supporting sterigma represents only a small fraction of the total energy available for spore ejection. Finally, our observations of this unique discharge mechanism reveal a surprising similarity with the mechanics of jumping in animals.

  2. Surface tension of ionic liquids and ionic liquid solutions.

    Science.gov (United States)

    Tariq, Mohammad; Freire, Mara G; Saramago, Benilde; Coutinho, João A P; Lopes, José N Canongia; Rebelo, Luís Paulo N

    2012-01-21

    Some of the most active scientific research fronts of the past decade are centered on ionic liquids. These fluids present characteristic surface behavior and distinctive trends of their surface tension versus temperature. One way to explore and understand their unique nature is to study their surface properties. This critical review analyses most of the surface tension data reported between 2001 and 2010 (187 references).

  3. Motion driven by the interface. [pendant drop surface tension in microgravity

    Science.gov (United States)

    Jayaraj, K.; Cole, R.; Subramanian, R. S.

    1983-01-01

    Due to the reduction in buoyant forces aboard orbiting spacecraft such as the Space Shuttle, fluid motion driven by gradients in interfacial tension will be important in the processing of materials in space. In this paper, preliminary results from a study of surface tension driven flow in a pendant drop are reported. The drop is heated from above, and the resulting temperature gradients on the drop surface give rise to interfacial tension gradients. These, in turn, drive a circulation in the drop which is made visible by suitable tracers. The velocities are measured using a video technique, and the data on core velocities are found to agree well with results from a predictive theoretical model.

  4. Modifying horizon thermodynamics by surface tensions

    CERN Document Server

    Chen, Deyou

    2016-01-01

    The modified first laws of thermodynamics at the black hole horizon and the cosmological horizon of the Schwarzschild de Sitter black hole and the apparent horizon of the Friedmann-Robertson-Walker cosmology are derived by the surface tensions, respectively. The corresponding Smarr relations are obeyed. For the black hole, the cosmological constant is first treated as a fixed constant, and then as a variable associated to the pressure. The law at the apparent horizon takes the same form as that at the cosmological horizon, but is different from that at the black hole horizon. The positive temperatures guarantee the appearance of the worked terms in the modified laws at the cosmological and apparent horizons. While they can disappear at the black hole horizon.

  5. Mixed venous-arterial CO2 tension gradient after cardiopulmonary bypass.

    Science.gov (United States)

    Takami, Yoshiyuki; Masumoto, Hiroshi

    2005-09-01

    Significant venous hypercarbia has been reported in septic shock and circulatory failure. Cardiopulmonary bypass also impairs systemic and pulmonary blood perfusion. The objective of this study was to determine the clinical significance of the increased venous-arterial CO2 tension gradient resulting from venous hypercarbia after cardiopulmonary bypass. On arrival in the intensive care unit, venous and arterial CO2 tensions were measured in the radial and pulmonary arteries in 140 consecutive patients who had undergone coronary (n = 79), valve (n = 34), aortic (n = 20), and other (n = 7) surgery under cardiopulmonary bypass. The mean venous-arterial CO2 tension gradient was 5.0 +/- 3.3 mm Hg (range, 7.7 to 15.7 mm Hg). By linear regression analysis, the factors that significantly correlated with venous-arterial CO2 tension gradient were bypass duration, aortic crossclamp time, initial arterial lactate level, transpulmonary arteriovenous lactate difference, arterial bicarbonate level, base excess, cardiac index, mixed venous O2 saturation, O2 delivery, O2 consumption, and the peak value of creatine kinase. The venous-arterial CO2 tension gradient may reflect impaired perfusion and anaerobic metabolism induced by cardiopulmonary bypass and could be a simple and useful indicator for patient management after surgery under cardiopulmonary bypass.

  6. Surface tension and long range corrections of cylindrical interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Bourasseau, E. [CEA/DAM DIF, F-91297 Arpajon Cedex (France); Malfreyt, P. [Université Clermont Auvergne, Université Blaise Pascal, Institut de Chimie de Clermont-Ferrand, BP 10448, F-63000 Clermont-Ferrand (France); Ghoufi, A., E-mail: aziz.ghoufi@univ-rennes1.fr [Institut de Physique de Rennes, UMR 6251 CNRS, Université de Rennes 1, 263 avenue Général Leclerc, 35042 Rennes (France)

    2015-12-21

    The calculation of the surface tension of curved interfaces has been deeply investigated from molecular simulation during this last past decade. Recently, the thermodynamic Test-Area (TA) approach has been extended to the calculation of surface tension of curved interfaces. In the case of the cylindrical vapour-liquid interfaces of water and Lennard-Jones fluids, it was shown that the surface tension was independent of the curvature of the interface. In addition, the surface tension of the cylindrical interface is higher than that of the planar interface. Molecular simulations of cylindrical interfaces have been so far performed (i) by using a shifted potential, (ii) by means of large cutoff without periodic boundary conditions, or (iii) by ignoring the long range corrections to the surface tension due to the difficulty to estimate them. Indeed, unlike the planar interfaces there are no available operational expressions to consider the tail corrections to the surface tension of cylindrical interfaces. We propose here to develop the long range corrections of the surface tension for cylindrical interfaces by using the non-exponential TA (TA2) method. We also extend the formulation of the Mecke-Winkelmann corrections initially developed for planar surfaces to cylindrical interfaces. We complete this study by the calculation of the surface tension of cylindrical surfaces of liquid tin and copper using the embedded atom model potentials.

  7. Surface tension and related thermodynamic quantities of aqueous electrolyte solutions

    CERN Document Server

    Matubayasi, Norihiro

    2013-01-01

    Surface tension provides a thermodynamic avenue for analyzing systems in equilibrium and formulating phenomenological explanations for the behavior of constituent molecules in the surface region. While there are extensive experimental observations and established ideas regarding desorption of ions from the surfaces of aqueous salt solutions, a more successful discussion of the theory has recently emerged, which allows the quantitative calculation of the distribution of ions in the surface region. Surface Tension and Related Thermodynamic Quantities of Aqueous Electrolyte Solutions provides a d

  8. Dynamic surface tension of heat transfer additives suitable for use in steam condensers and absorbers

    Energy Technology Data Exchange (ETDEWEB)

    Jun, Yong-Du [Department of Mechanical and Automotive Engineering, Kongju National University, Kongju, Chungnam, 314-701 (Korea); Kim, Kwang J.; Kennedy, John M. [Department of Mechanical Engineering, University of Nevada-Reno, MS 312, Reno, NV 89557 (United States)

    2010-03-15

    Additives are often effectively used in enhancing heat transfer by creating a surface tension gradient on the surface of a condensate film to induce Marangoni driven ''dropwise-like'' condensation. The objective of the current study is to use the Maximum Bubble Pressure Method (MBPM) to evaluate dynamic behavior of the surface tension of solutions of three different additives (2-ethoxy ethanol, isobutylamine, and 2-ethyl-1-hexanol) of varying concentrations with water. It was shown that the effects of 2-ethoxy ethanol on surface tension was primarily dependent on solute concentration and showed little dependence on time (i.e. surface age of bubble). While both isobutylamine and 2-ethyl-1-hexanol showed strong dependence on both concentration and time, the effects of the later were far more dramatic. The results for all solutions are presented as functions of concentration and time (i.e. surface age of bubble). (author)

  9. Surface tension of molten tin investigated with sessile drop method

    Institute of Scientific and Technical Information of China (English)

    LI Jing; YUAN Zhang-fu; FAN Jian-feng; KE Jia-jun

    2005-01-01

    The surface tension of molten tin was determined by a set of self-developed digital equipment with sessile drop method at oxygen partial pressure of 1.0 × 10-6 MPa under different temperatures, and the dependence of surface tension of molten tin on temperature was also discussed. The emphasis was placed on the comparison of surface tension of the same molten tin sample measured by using different equipments with sessile drop method. Results of the comparison indicate that the measurement results with sessile drop method under the approximate experimental conditions are coincident, and the self-developed digital equipment for surface tension measurement has higher stability and accuracy. The relationships of surface tension of molten tin and its temperature coefficient with temperature and oxygen partial pressure were also elucidated from the thermodynamic equilibrium analysis.

  10. Geometric Interpretation of Surface Tension Equilibrium in Superhydrophobic Systems

    Directory of Open Access Journals (Sweden)

    Michael Nosonovsky

    2015-07-01

    Full Text Available Surface tension and surface energy are closely related, although not identical concepts. Surface tension is a generalized force; unlike a conventional mechanical force, it is not applied to any particular body or point. Using this notion, we suggest a simple geometric interpretation of the Young, Wenzel, Cassie, Antonoff and Girifalco–Good equations for the equilibrium during wetting. This approach extends the traditional concept of Neumann’s triangle. Substances are presented as points, while tensions are vectors connecting the points, and the equations and inequalities of wetting equilibrium obtain simple geometric meaning with the surface roughness effect interpreted as stretching of corresponding vectors; surface heterogeneity is their linear combination, and contact angle hysteresis is rotation. We discuss energy dissipation mechanisms during wetting due to contact angle hysteresis, the superhydrophobicity and the possible entropic nature of the surface tension.

  11. The effects of ambient impurities on the surface tension

    Directory of Open Access Journals (Sweden)

    Ponce-Torres A.

    2016-01-01

    Full Text Available A liquid bridge is a liquid column held captive between two coaxial and parallel solid disks. It is an excellent test bench where measuring the surface tension. In this paper, we used this fluid configuration to examine experimentally the effects of ambient impurities on the surface tension over time. For this purpose, the liquid bridge equilibrium shape was analyzed when the liquid bridge was surrounded by three environments: the uncontrolled ambient, and both air and argon encapsulated in a small glass cover. Ambient contamination produced a sharp decrease of the surface tension of ultra-pure water. The presence of an anionic surfactant in the free surface of an aqueous solution did not inhibit the action of impurities coming from the ambient. Impurities can influence the dynamical behavior of the free surface in flows dominated by the surface tension. Therefore, a careful control of that influence can be crucial in many applications of fluid mechanics.

  12. Nonzero Ideal Gas Contribution to the Surface Tension of Water.

    Science.gov (United States)

    Sega, Marcello; Fábián, Balázs; Jedlovszky, Pál

    2017-06-15

    Surface tension, the tendency of fluid interfaces to behave elastically and minimize their surface, is routinely calculated as the difference between the lateral and normal components of the pressure or, invoking isotropy in momentum space, of the virial tensor. Here we show that the anisotropy of the kinetic energy tensor close to a liquid-vapor interface can be responsible for a large part of its surface tension (about 15% for water, independent from temperature).

  13. Molecular dynamics simulation of liquid-vapor surface tension

    Institute of Scientific and Technical Information of China (English)

    王德; ZENG; Danling; 等

    2002-01-01

    A molecular dynamics simulation model is established based on the well-known Lennard-Jones 12-6 potential function to determine the surface tension of a Lennard-Jones liquid-vapor interface.The simulation is carried out with argon as the working fluid of a given molecular number at different temperature and different truncated radius.It is found that the surface tension of a Lennard-Jones fluid is likely to be bigger for a bigger truncated radius,and tends to be constant after the truncated radius increased to a certain value.It is also found that the surface tension becomes smaller as the temperature increases.

  14. Surface Tension of Molten Ni and Ni-Co Alloys

    Institute of Scientific and Technical Information of China (English)

    Feng XIAO; Liang FANG; Kiyoshi NOGI

    2005-01-01

    Surface tension of molten Ni and Ni-Co (5 and 10 mass fraction) alloys was measured at the temperature range of 1773~1873 K using an improved sessile drop method with an alumina substrate in an Ar+3%H2 atmosphere. The error of the data obtained was analyzed. The surface tension of molten Ni and Ni-Co (5 and 10 mass fraction) alloys decreases with increasing temperature. The influence of Co on the surface tension of Ni-Co alloys is little in the studied Co concentration range.

  15. Surface tension of liquid Au-Bi-Sn alloys

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    The surface tension of a promising lead-free solder Au-Bi-Sn alloys was investigated both by the sessile-drop method and calculation. Experimental measurements were carried out for two cross-sections with the constant gold to bismuth ration of 1:1 and 1:2. For all the investigated compositions, decrease of the surface tension is observed with increasing temperature. Meanwhile, the surface tension values were also calculated based on Butler's equation, with using the newest research on thermodynamics data of...

  16. Surface tension of molecular liquids: Lattice gas approach

    CERN Document Server

    Maslechko, A; Kulinskii, V

    2016-01-01

    The approach of global isomorphism between the fluid and the Ising model is applied to obtain an expression for the surface tension of the Lennard-Jones fluid on the basis of the information about the Ising model. This is done in a broad interval of temperatures along the phase coexistence, and is valid both in 2D and 3D. The relation between the critical amplitudes of the surface tension of the fluid and the Ising model is derived in the vicinity of the critical point. The obtained theoretical estimates agree well with the literature results for the surface tension. The methodology is demonstrated for the 2D LJ fluid on the basis of the exact solution of the 2D Ising model and is tested for the 3D LJ fluid. As a result, an expression for the surface tension without any fitting parameter is derived.

  17. Molecular Dynamic Simulations on Surface Tension of Methanol

    Science.gov (United States)

    Obeidat, Abdalla

    2015-04-01

    Molecular dynamic simulations have been performed to study the surface tension of methanol at low temperatures. Six different models of methanol have been studied to compute the surface tension of different models. The models have been used to predict the surface tensions are: OPLS, Gromos 96, H1, J1, J2, and van Leeuwen model. Our results show that the most accurate model compared to true methanol was van Leeuwen model. The results were fitted to a straight line to predict other data of surface tension at specific temperature. The simulation were performed using the Gromacs package at temperatures: 200, 210, 220, 230, 240, 250, 260, 270, 280, 290, and 300 K. This work is supported by JUST.

  18. Second Inflection Point of the Surface Tension of Water

    Science.gov (United States)

    Kalova, Jana; Mares, Radim

    2012-06-01

    The theme of a second inflection point of the temperature dependence of the surface tension of water remains a subject of controversy. Using data above 273 K, it is difficult to get a proof of existence of the second inflection point, because of experimental uncertainties. Data for the surface tension of supercooled water and results of a molecular dynamics study were included into the exploration of existence of an inflection point. A new term was included into the IAPWS equation to describe the surface tension in the supercooled water region. The new equation describes the surface tension values of ordinary water between 228 K and 647 K and leads to the inflection point value at a temperature of about 1.5 °C.

  19. Surface tension of compositions of polyhexametyleneguanidine hydrochloride - surfactants

    Directory of Open Access Journals (Sweden)

    S. Kumargaliyeva

    2012-12-01

    Full Text Available We made up songs bactericidal polyhexamethyleneguanidine hydrochloride (metacyde with the surface-active substances - anionic sodium dodecylsulfate, cationic cetylpyridinium bromide, and nonionic Tween-80 and measured the surface tension of water solutions. The study showed that the composition metacyde with surface-active agents have a greater surface activity than the individual components.

  20. A comparison of central venous-arterial and mixed venous-arterial carbon dioxide tension gradient in circulatory failure.

    Science.gov (United States)

    Ho, K M; Harding, R; Chamberlain, J

    2007-10-01

    The arterial and mixed venous carbon dioxide tension gradient has been shown to increase when there is a decrease in cardiac output. Monitoring central venous gases is an attractive alternative to monitoring mixed venous gases in circulatory failure because central venous catheterisation is a less invasive procedure than pulmonary artery catheterisation. This study aims to evaluate the agreement between central venous-arterial carbon dioxide (CVA-CO2) and mixed venous-arterial carbon dioxide (SVA-CO2) tension gradients and assess whether CVA-CO2 tension gradient can be used to predict cardiac output in circulatory failure. Samples of arterial, central venous and mixed venous blood were obtained from 16 patients with circulatory failure at different inspired oxygen concentrations and cardiac indexes within 24 hours of study enrolment. CVA-CO2 and SVA-CO2 tension gradient were not interchangeable numerically (bias = 0.14 mmHg, 95% limits of agreement: -3.0 to 3.2 mmHg). CVA-CO2 (Spearman correlation coefficient r = -0.385) and SVA-CO, (r = -0.578) tension gradient were significantly correlated with the cardiac index but the cardiac index only accounted for 21% and 32% of the variability of CVA-CO, and SVA-CO2 tension gradient, respectively. The ability of CVA-CO2 tension gradient (area under the ROC curve = 0.77, 95% confidence interval [CI]: 0.49-0.99; P = 0.08) to predict a low cardiac output state (cardiac index tension gradient appeared to be limited to their negative predictive value to exclude a low cardiac output state when CVA-CO, or SVA-CO, tension gradient was normal (< or =5 mmHg).

  1. Surface tension of calcium hydroxide associated with different substances

    OpenAIRE

    Carlos Estrela; Cyntia Rodrigues de Araújo Estrela; Luiz Fernando Guimarães; Reginaldo Santana Silva; Jesus Djalma Pécora

    2005-01-01

    The purpose of this study was to evaluate the surface tension of calcium hydroxide (CH) associated with different substances (deionized distilled water, camphorated paramonochlorophenol, 2% chlorhexidine digluconate, Otosporin, 3% sodium lauryl ether sulphate; Furacin, PMC Furacin) using tensiometer. The action of the substances studied on the dentinal structure enhances the property of surface tension. This method consists in the application of force to separate a platinum ring immersed in t...

  2. Surface Tension between Kaon Condensate and Normal Nuclear Matter Phase

    OpenAIRE

    Christiansen, Michael B.; Glendenning, Norman K.; Schaffner-Bielich, Jurgen

    2000-01-01

    We calculate for the first time the surface tension and curvature coefficient of a first order phase transition between two possible phases of cold nuclear matter, a normal nuclear matter phase in equilibrium with a kaon condensed phase, at densities a few times the saturation density. We find the surface tension is proportional to the difference in energy density between the two phases squared. Furthermore, we show the consequences for the geometrical structures of the mixed phase region in ...

  3. Surface tension with Normal Curvature in Curved Space-Time

    CERN Document Server

    kumar, Himanshu; Ahmad, Suhail

    2012-01-01

    With an aim to include the contribution of surface tension in the action of the boundary, we define the tangential pressure in terms of surface tension and Normal curvature in a more naturally geometric way. First, we show that the negative tangential pressure is independent of the four-velocity of a very thin hyper-surface. Second, we relate the 3-pressure of a surface layer to the normal curvature and the surface tension. Third, we relate the surface tension to the energy of the surface layer. Four, we show that the delta like energy flows across the hyper-surface will be zero for such a representation of intrinsic 3-pressure. Five, for the weak field approximation and for static spherically symmetric configuration, we deduce the classical Kelvin's relation. Six, we write a modified action for the boundary having contributions both from surface tension and normal curvature of the surface layer. Also we propose a method to find the physical action assuming a reference background, where the background is not ...

  4. Surface Tensions and Their Variations with Temperature and Impurities

    Science.gov (United States)

    Hardy, S. C.; Fine, J.

    1985-01-01

    The surface tensions in this work were determined using the sessile drop technique. This method is based on a comparison of the profile of a liquid drop with the profile calculated by solving the Young-Laplace equation. The comparison can be made in several ways; the traditional Bashforth-Adams procedure was used in conjunction with recently calculated drop shape tables which virtually eliminate interpolation errors. Although previous study has found little difference in measurements with pure and oxygen doped silicon, there is other evidence suggesting that oxygen in dilute concentrations severely depresses the surface tension of silicon. The surface tension of liquid silicon in purified argon atmospheres was measured. A temperature coefficient near -0.28 mJ/square meters K was found. The experiments show a high sensitivity of the surface tension to what is believed are low concentrations of oxygen. Thus one cannot rule out some effect of low levels of oxygen in the results. However, the highest surface tension values obtained in conditions which minimized the residual oxygen pressure are in good agreement with a previous measurement in pure hydrogen. Therefore, depression of the surface tension by oxygen is insignificant in these measurements.

  5. Surface tension of liquid metals and alloys--recent developments.

    Science.gov (United States)

    Egry, I; Ricci, E; Novakovic, R; Ozawa, S

    2010-09-15

    Surface tension measurements are a central task in the study of surfaces and interfaces. For liquid metals, they are complicated by the high temperatures and the consequently high reactivity characterising these melts. In particular, oxidation of the liquid surface in combination with evaporation phenomena requires a stringent control of the experimental conditions, and an appropriate theoretical treatment. Recently, much progress has been made on both sides. In addition to improving the conventional sessile drop technique, new containerless methods have been developed for surface tension measurements. This paper reviews the experimental progress made in the last few years, and the theoretical framework required for modelling and understanding the relevant physico-chemical surface phenomena.

  6. Measurement of dynamic surface tension by mechanically vibrated sessile droplets

    Science.gov (United States)

    Iwata, Shuichi; Yamauchi, Satoko; Yoshitake, Yumiko; Nagumo, Ryo; Mori, Hideki; Kajiya, Tadashi

    2016-04-01

    We developed a novel method for measuring the dynamic surface tension of liquids using mechanically vibrated sessile droplets. Under continuous mechanical vibration, the shape of the deformed droplet was fitted by numerical analysis, taking into account the force balance at the drop surface and the momentum equation. The surface tension was determined by optimizing four parameters: the surface tension, the droplet's height, the radius of the droplet-substrate contact area, and the horizontal symmetrical position of the droplet. The accuracy and repeatability of the proposed method were confirmed using drops of distilled water as well as viscous aqueous glycerol solutions. The vibration frequency had no influence on surface tension in the case of pure liquids. However, for water-soluble surfactant solutions, the dynamic surface tension gradually increased with vibration frequency, which was particularly notable for low surfactant concentrations slightly below the critical micelle concentration. This frequency dependence resulted from the competition of two mechanisms at the drop surface: local surface deformation and surfactant transport towards the newly generated surface.

  7. Liquid droplet movement on horizontal surface with gradient surface energy

    Institute of Scientific and Technical Information of China (English)

    LIAO Qiang; WANG Hong; ZHU Xun; LI Mingwei

    2006-01-01

    A surface with gradient surface energy was fabricated on a silicon wafer by using the chemical vapor deposition (CVD) technology with the dodecyltrichlorosilane (C12H25Cl3Si) vapor which was adsorbed chemically on the surface of the silicon wafer to form a self-assemble monolayer (ASM) and thus a gradient profile of wettability. The microscopic contours of the gradient surface were measured with Seiko SPA400 atom force microscope (AFM). And the surface wettability profile was characterized by the sessile drop method, measuring the contact angle of fine water droplets that lay on the gradient surface, to represent the distribution of the surface energy on the surface. Using a high-speed video imaging system, the motion of water droplet on the horizontal gradient surface was visualized and the transient velocity was measured under ambient condition. The experimental results show that the liquid droplets can be driven to move from hydrophobic side to hydrophilic side on the horizontal gradient surface and the velocity of droplet can reach up to 40 mm/s. In addition, the motion of the water droplet can be generally divided into two stages: an acceleration stage and a deceleration stage. The droplet presents a squirming movement on the surface with a lower peak velocity and a larger extent of deceleration motion. And the static advancing contact angle of the droplet is obviously larger than the dynamic advancing contact angle on the gradient energy surface.

  8. Multiscale surface roughening of commercial purity titanium during uniaxial tension

    Energy Technology Data Exchange (ETDEWEB)

    Panin, Alexey, E-mail: pav@ispms.tsc.ru [Institute of Strength Physics and Materials Science SB RAS, Tomsk, 634055 (Russian Federation); National Research Tomsk Polytechnic University, Tomsk, 634050 (Russian Federation); Kazachenok, Marina, E-mail: kms@ispms.tsc.ru; Kozelskaya, Anna, E-mail: annakozelskaya@gmail.com; Sinyakova, Elena, E-mail: mea@ispms.tsc.ru [Institute of Strength Physics and Materials Science SB RAS, Tomsk, 634055 (Russian Federation); Lider, Andrey, E-mail: lider@tpu.ru; Sklyarova, Elena, E-mail: skea@tpu.ru [National Research Tomsk Polytechnic University, Tomsk, 634050 (Russian Federation)

    2015-10-27

    The mechanisms of the surface roughening of the titanium specimens during uniaxial tension were demonstrated. By means of optical profilometry and electron backscattered diffraction it was shown that the formation of surface roughening is a multilevel process. The correlation between the density of slip in some grains, and grain rotation, and their displacement towards the free surface was investigated.

  9. Surface borehole synthesis tension deformation fracture time-space rule

    Institute of Scientific and Technical Information of China (English)

    Liu Jianzhong; Sun Haitao; Hu Qianting

    2012-01-01

    In order to release the tension and shear effect of the superjacent rock strata movement during excavation in coal mine,protect the surface borehole case from fracturing fast and make a good use of the surface borehole during goaf methane drawing,a common synthesis tension deformation fracture model was set up based on the synthesis tension effect of the rock strata,and the deformation rule of the surface borehole case with time and space was researched.The results suggest that,to reduce the deformation the surface borehole should be built between the boundary of the stope and the knee of subsidence curve.At the same time,a 3DEC simulation model and an engineering example were carried out to examine the rules of theoretical model.The result suggests that the model and the rules accord to the test and have good building and protection engineering application values to the surface borehole.

  10. Surface tension alteration on calcite, induced by ion substitution

    DEFF Research Database (Denmark)

    Sakuma, Hiroshi; Andersson, Martin Peter; Bechgaard, Klaus

    2014-01-01

    The interaction of water and organic molecules with mineral surfaces controls many processes in nature and industry. The thermodynamic property, surface tension, is usually determined from the contact angle between phases, but how does one understand the concept of surface tension at the nanoscale...... in the pore water. Incorporation of MgSO4 into calcite, which is energetically favored, decreases surface tension and releases polar oil compounds......., where particles are smaller than the smallest droplet? We investigated the energy required to exchange Mg2+ and SO4 2- from aqueous solution into calcite {10.4} surfaces using density functional theory. Mg2+ substitution for Ca2+ is favored but only when SO4 2- is also present and MgSO4 incorporates...

  11. Decay of viscous surface waves without surface tension

    CERN Document Server

    Guo, Yan

    2010-01-01

    Consider a viscous fluid of finite depth below the air. In the absence of the surface tension effect at the air-fluid interface, the long time behavior of a free surface with small amplitude has been an intriguing question since the work of Beale \\cite{beale_1}. In this monograph, we develop a new mathematical framework to resolve this question. If the free interface is horizontally infinite, we establish that it decays to a flat surface at an algebraic rate. On the other hand, if the free interface is periodic, we establish that it decays at an almost exponential rate, i.e. at an arbitrarily fast algebraic rate determined by the smallness of the data. Our framework contains several novel techniques, which include: (1) a local well-posed theory of the Navier-Stokes equations in the presence of a moving boundary; (2) a two-tier energy method that couples the boundedness of high-order energy to the decay of low-order energy, the latter of which is necessary to balance out the growth of the highest derivatives o...

  12. Strain gradient effects in surface roughening

    DEFF Research Database (Denmark)

    Borg, Ulrik; Fleck, N.A.

    2007-01-01

    A thin aluminium sheet comprising of large polycrystals is pulled in uniaxial tension and the resulting surface profile is measured in a scanning electron microscope. The surface profile near the grain boundaries reveals a local deformation pattern of width of a few micrometres and is strong...... scale. An interfacial potential that penalizes the dislocations in crossing the grain boundary is included in the analysis. The results indicate that the surface profile is strongly dependent upon the choice of this potential and on the material length scale....

  13. Calculation of the interfacial tension of the methane-water system with the linear gradient theory

    DEFF Research Database (Denmark)

    Schmidt, Kurt A. G.; Folas, Georgios; Kvamme, Bjørn

    2007-01-01

    The linear gradient theory (LGT) combined with the Soave-Redlich-Kwong (SRK EoS) and the Peng-Robinson (PR EoS) equations of state has been used to correlate the interfacial tension data of the methane-water system. The pure component influence parameters and the binary interaction coefficient...... for the mixture influence parameter have been obtained for this system. The model was successfully applied to correlate the interfacial tension data set to within 2.3% for the linear gradient theory and the SRK EoS (LGT-SRK) and 2.5% for the linear gradient theory and PE EoS (LGT-PR). A posteriori comparison...... of data not used in the parameterisation were to within 3.2% for the LGT-SRK model and 2.7% for the LGT-PR model. An exhaustive literature review resulted in a large database for the investigation which covers a wide range of temperature and pressures. The results support the success of the linear...

  14. Why is surface tension a force parallel to the interface?

    CERN Document Server

    Marchand, Antonin; Snoeijer, Jacco H; Andreotti, Bruno

    2012-01-01

    A paperclip can float on water. Drops of mercury refuse to spread on a surface. These capillary phenomena are macroscopic manifestations of molecular interactions, and can be explained in terms of surface tension. For students, the concept of surface tension is quite challenging since the microscopic intuition is often in conflict with the common macroscopic interpretations. In this paper we address a number of conceptual questions that are often encountered when teaching capillarity. By answering these questions we provide a perspective that reconciles the macroscopic viewpoints, from thermodynamics or fluid mechanics, and the microscopic perspective from statistical physics.

  15. Surface tension driven flow in glass melts and model fluids

    Science.gov (United States)

    Mcneil, T. J.; Cole, R.; Subramanian, R. S.

    1982-01-01

    Surface tension driven flow has been investigated analytically and experimentally using an apparatus where a free column of molten glass or model fluids was supported at its top and bottom faces by solid surfaces. The glass used in the experiments was sodium diborate, and the model fluids were silicone oils. In both the model fluid and glass melt experiments, conclusive evidence was obtained to prove that the observed flow was driven primarily by surface tension forces. The experimental observations are in qualitative agreement with predictions from the theoretical model.

  16. Surface tension of highly magnetized degenerate quark matter

    CERN Document Server

    Lugones, G

    2016-01-01

    We study the surface tension of highly magnetized three flavor quark matter within the formalism of multiple reflection expansion (MRE). Quark matter is described as a mixture of free Fermi gases composed by quarks $u$, $d$, $s$ and electrons, in chemical equilibrium under weak interactions. Due to the presence of strong magnetic fields the particles' transverse motion is quantized into Landau levels, and the surface tension has a different value in the parallel and transverse directions with respect to the magnetic field. We calculate the transverse and longitudinal surface tension for different values of the magnetic field and for quark matter drops with different sizes, from a few fm to the bulk limit. For baryon number densities between $2-10$ times the nuclear saturation density, the surface tension falls in the range $2 - 20$ MeV /fm$^{2}$. The largest contribution comes from strange quarks which have a surface tension an order of magnitude larger than the one for $u$ or $d$ quarks and more than two ord...

  17. Surface tension regularizes the crack singularity of adhesion

    NARCIS (Netherlands)

    Karpitschka, Stefan; van Wijngaarden, L.; van Wijngaarden, L.; Snoeijer, Jacobus Hendrikus

    2016-01-01

    The elastic and adhesive properties of a solid surface can be quantified by indenting it with a rigid sphere. Indentation tests are classically described by the JKR-law when the solid is very stiff, while recent work highlights the importance of surface tension for exceedingly soft materials. Here

  18. Why is surface tension a force parallel to the interface?

    NARCIS (Netherlands)

    Marchand, Antonin; Weijs, Joost H.; Weijs, Joost; Snoeijer, Jacobus Hendrikus; Andreotti, Bruno

    2011-01-01

    A paperclip can float on water. Drops of mercury do not spread on a surface. These capillary phenomena are macroscopic manifestations of molecular interactions and can be explained in terms of surface tension. We address several conceptual questions that are often encountered when teaching

  19. Surface tension of the Widom-Rowlinson model.

    Science.gov (United States)

    de Miguel, E; Almarza, N G; Jackson, G

    2007-07-21

    We consider the computation of the surface tension of the fluid-fluid interface for the Widom-Rowlinson [J. Chem. Phys. 52, 1670 (1970)] binary mixture from direct simulation of the inhomogeneous system. We make use of the standard mechanical route, in which the surface tension follows from the computation of the normal and tangential components of the pressure tensor of the system. In addition to the usual approach, which involves simulations of the inhomogeneous system in the canonical ensemble, we also consider the computation of the surface tension in an ensemble where the pressure perpendicular (normal) to the planar interface is kept fixed. Both approaches are seen to provide consistent values of the interfacial tension. The issue of the system-size dependence of the surface tension is addressed. In addition, simulations of the fluid-fluid coexistence properties of the mixture are performed in the semigrand canonical ensemble. Our results are compared with existing data of the Widom-Rowlinson mixture and are also examined in the light of the vapor-liquid equilibrium of the thermodynamically equivalent one-component penetrable sphere model.

  20. The Role of Bag Surface Tension in Color Confinement

    CERN Document Server

    Bugaev, K A

    2011-01-01

    We discuss here the novel view at the color confinement which, on the one hand, allows us to find out the surface tension coefficient of quark gluon bags and, under a plausible assumption, to determine the endpoint temperature of the QCD phase diagram, on the other hand. The present model considers the confining color tube as the cylindrical quark gluon bag with non-zero surface tension. A close inspection of the free energies of elongated cylindrical bag and the confining color tube that connects the static quark-antiquark pair allows us to find out the string tension in terms of the surface tension, thermal pressure and the bag radius. Using the derived relation it is possible to estimate the bag surface tension at zero temperature directly from the lattice QCD data and to estimate the (tri)critical endpoint temperature. In the present analysis the topological free energy of the cylindrical bag is accounted for the first time. The requirement of positive entropy density of such bags leads to negative values...

  1. Molecular simulation of the surface tension of real fluids

    CERN Document Server

    Werth, Stephan; Hasse, Hans

    2016-01-01

    Molecular models of real fluids are validated by comparing the vapor-liquid surface tension from molecular dynamics (MD) simulation to correlations of experimental data. The considered molecular models consist of up to 28 interaction sites, including Lennard-Jones sites, point charges, dipoles and quadrupoles. They represent 38 real fluids, such as ethylene oxide, sulfur dioxide, phosgene, benzene, ammonia, formaldehyde, methanol and water, and were adjusted to reproduce the saturated liquid density, vapor pressure and enthalpy of vaporization. The models were not adjusted to interfacial properties, however, so that the present MD simulations are a test of model predictions. It is found that all of the considered models overestimate the surface tension. In most cases, however, the relative deviation between the simulation results and correlations to experimental data is smaller than 20 %. This observation corroborates the outcome of our previous studies on the surface tension of 2CLJQ and 2CLJD fluids where a...

  2. Research of some marks contemporary hydrocarbon fuel surface tension

    Directory of Open Access Journals (Sweden)

    С.В. Бойченко

    2005-01-01

    Full Text Available  The  surface  tension  of  some  marks  domestic  and  foreign  gasoline’s  and  jet  fuels  is  investigated  depending  on  distillation. Dependences  of  surface  tension,  composition,  boiling  points  liquid  fuel  experimentally  are  received.

  3. Instantons and surface tension at a first-order transition

    Science.gov (United States)

    Gupta, Sourendu

    1994-04-01

    We study the dynamics of the first-order phase transition in the two-dimensional 15-state Potts model, both at and off equilibrium. We find that phase changes take place through nucleation in both cases, and finite volume effects are described well through an instanton computation. Thus a dynamical measurement of the surface tension is possible. We find that the order-disorder surface tension is compatible with perfect wetting. An accurate treatment of fluctuations about the instanton solution is seen to be of great importance. Current Address: Theory Group, TIFR, Homi Bhabha Road, Bombay 400005, India.

  4. Estimation of the surface tension of ocular cornea

    Science.gov (United States)

    Zhang, Xueyong; Ma, Jianguo; Lu, Rongsheng; Xia, Ruixue

    2008-12-01

    Considering the potential clinical importance, the surface tension of ocular cornea under the action of normal physiological intraocular pressure is estimated, and a novel technique and a simple mechanical model for determining the tension are also presented in this paper. An instrument embodying mainly a CCD camera, an optical staff gauge and a manometer was developed primarily to measure both the surface point displacement and intraocular pressure of the cornea. A simple theoretical model was used to characterize the tensions of the ocular corneas under the action of the intraocular pressure. Due to the difficulty in obtaining the human cornea, laboratory experiments were carried out on porcine cornea specimens. The thickness of the specimens was accurately measured by optical coherence tomography. The matrix and collagen properties within the corneal tissue were manifested in the experiment. Experimental results on porcine corneas showed that the present technique is applicable to estimate the surface tension. In the normal physiological intraocular pressure range, both meridian and circumference tensions of the porcine corneas along the radial coordinate distribute are not uniform.

  5. Surface pore tension and adsorption characteristics of polluted sediment

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Most natural sediment particles have numerous pores and a complex surface texture which facilitates their adsorption of contaminants. Particle surface structure,therefore,is an important instrumental factor in the transport of contaminants,especially in water environments. This paper reports on the results of adsorption-desorption experiments to analyze polluted sediment surface pore tension characteristics performed on samples from the bottom of Guanting Reservoir. In our analysis,the Frenkel-Halsey-Hill(FHH) equation is applied to calculate the fractal dimensions of particles to quantify the surface roughness and pore tension characteristics. The results show that the surface fractal dimensions of sediment particle surfaces normally measure from 2.6 to 2.85. The volume of pores smaller than 10 nm changes significantly after being contaminated with pollutants and the fractal dimension decreases because the pores adsorb the contaminants.

  6. A thermodynamical model for the surface tension of silicate melts in contact with H2O gas

    Science.gov (United States)

    Colucci, Simone; Battaglia, Maurizio; Trigila, Raffaello

    2016-01-01

    Surface tension plays an important role in the nucleation of H2O gas bubbles in magmatic melts and in the time-dependent rheology of bubble-bearing magmas. Despite several experimental studies, a physics based model of the surface tension of magmatic melts in contact with H2O is lacking. This paper employs gradient theory to develop a thermodynamical model of equilibrium surface tension of silicate melts in contact with H2O gas at low to moderate pressures. In the last decades, this approach has been successfully applied in studies of industrial mixtures but never to magmatic systems. We calibrate and verify the model against literature experimental data, obtained by the pendant drop method, and by inverting bubble nucleation experiments using the Classical Nucleation Theory (CNT). Our model reproduces the systematic decrease in surface tension with increased H2O pressure observed in the experiments. On the other hand, the effect of temperature is confirmed by the experiments only at high pressure. At atmospheric pressure, the model shows a decrease of surface tension with temperature. This is in contrast with a number of experimental observations and could be related to microstructural effects that cannot be reproduced by our model. Finally, our analysis indicates that the surface tension measured inverting the CNT may be lower than the value measured by the pendant drop method, most likely because of changes in surface tension controlled by the supersaturation.

  7. New thermodynamics for evaluating the surface-phase enrichment in the lower surface tension component.

    Science.gov (United States)

    Santos, M Soledade C S; Reis, João Carlos R

    2014-09-15

    Regarding the surface phase of liquid mixtures as a thermodynamic phase, ideal surface phases are designed so that at fixed bulk-phase composition, real and ideal surface phases have the same chemical composition and identical limiting slopes for the dependence of surface tension on mole fraction. Standard chemical potentials are introduced for surface phase components, and quasi-exact expressions are worked out to compute ideal surface tensions and surface-phase compositions of real liquid mixtures. Guidelines for choosing molecular models to estimate the molar surface area of pure constituents are given. Ideal and excess surface tensions are calculated by using literature data for aqueous ethanol solutions at 298 K. These results show treatment based on Butler's equations grossly overestimate predicted surface tensions, thus leading to lower ethanol content in the surface phase. These inaccuracies are ascribed to the use of molar surface areas in model equations that are too small.

  8. Surface tension effects on immersed electrosprays

    CERN Document Server

    Marin, Alvaro G; Barrero, Antonio

    2012-01-01

    Electrosprays are a powerful technique to generate charged micro/nanodroplets. In the last century, the technique received extensive study and successful applications, including a Nobel price in Chemistry. However, nowadays its use in microfluidic devices is still limited mainly due to a lack of knowledge of the phenomenon when the dispersing fluid is immersed in another inmiscible liquid. The "immersed electrosprays" share almost identical properties as their counterparts in air. Things however change when surface active agents are added to the host liquid, which are normally used in lab-on-chip applications to stabilize the generated emulsions. In this work, we review the main properties of the immersed electrosprays in liquid baths with no surfactant, and we methodically study the behavior of the system for increasing surfactant concentrations. The different regimes found are then analyzed and compared with both classical and more recent experimental, theoretical and numerical studies. A very rich phenomen...

  9. Three-Dimensional Smoothed Particle Hydrodynamics Simulation for Liquid Droplet with Surface Tension

    OpenAIRE

    Terissa, Hanifa; Barecasco, Agra; Naa, Christian Fredy

    2013-01-01

    We provide a basic method of Smoothed Particle Hydrodynamics (SPH) to simulate liquid droplet with surface tension in three dimensions. Liquid droplet is a simple case for surface tension modeling. Surface tension works only on fluid surface. In SPH method, we simply apply the surface tension on the boundary particles of liquid. The particle on the 3D boundary was detected dynamically using Free-Surface Detection algorithm. The normal vector and curvature of the boundary surface were calculat...

  10. Following or Against Topographic Wettability Gradient: Movements of Droplets on a Micropatterned Surface.

    Science.gov (United States)

    Zhao, Jiayi; Chen, Shuo

    2017-05-30

    Two kinds of possible movements of droplets (i.e., following or against the topographic wettability gradient) on a micropatterned surface are investigated by using a particle-based method: many-body dissipative particle dynamics (MDPD). The displacement along the wettability gradient and contact angles on both sides of the droplet are analyzed. The results show that the migration trajectory of the droplet is determined by the coexistence of Cassie and Wenzel states and the unbalanced Young's force, which are related to the impact velocity, pillar height, and surface tension. The droplet remains in the Cassie state and advances spontaneously following the wettability gradient under a small impact velocity, high pillar height, and large surface tension. On the contrary, when the coexistence of Cassie and Wenzel states appears, the contact line on the side of the Cassie state retracts and that on the side of the Wenzel state pins, inducing droplet movement against the wettability gradient. Additionally, the critical impinging velocity, which determines the migration direction of the droplet, also depends on the pillar height and surface tension. The outcomes are helpful in designing surfaces with topographical wettability gradients for droplet transportation.

  11. Dropwise Condensation on a Radial Gradient Surface

    Science.gov (United States)

    Macner, Ashley; Daniel, Susan; Steen, Paul

    2013-11-01

    In transient dropwise condensation from steam onto a cool surface, distributions of drops evolve by nucleation, growth, and coalescence. This study examines how surface functionalization affects drop growth and coalescence. Surfaces are treated by silanization to deliver either a spatially uniform contact-angle (hydrophilic, neutral, and hydrophobic) or a radial gradient of contact-angles. The time evolution of number-density and associated drop-size distributions are reported. For a typical condensation experiment on a uniform angle surface, the number-density curves show two regimes: an initial increase in number-density as a result of nucleation and a subsequent decrease in number-density as a result of larger scale coalescence events. Without a removal mechanism, the fractional coverage, regardless of treatment, approaches unity. For the same angle-surface, the associated drop-size distributions progress through four different shapes along the growth curve. In contrast, for a radial gradient surface where removal by sweeping occurs, the number-density increases and then levels off to a value close to the maximum number-density that is well below unity coverage and only two shapes of distributions are observed. Implications for heat transfer will be discussed. This work was supported by a NASA Office of the Chief Technologist's Space Technology Research Fellowship.

  12. Dynamic surface tension of surfactant TA: experiments and theory.

    Science.gov (United States)

    Otis, D R; Ingenito, E P; Kamm, R D; Johnson, M

    1994-12-01

    A bubble surfactometer was used to measure the surface tension of an aqueous suspension of surfactant TA as a function of bubble area over a range of cycling rates and surfactant bulk concentrations. Results of the surface tension-interfacial area loops exhibited a rich variety of phenomena, the character of which varied systematically with frequency and bulk concentration. A model was developed to interpret and explain these data and for use in describing the dynamics of surface layers under more general circumstances. Surfactant was modeled as a single component with surface tension taken to depend on only the interfacial surfactant concentration. Two distinct mechanisms were considered for the exchange of surfactant between the bulk phase and interface. The first is described by a simple kinetic relationship for adsorption and desorption that pertains only when the interfacial concentration is below its maximum equilibrium value. The second mechanism is "squeeze-out" by which surfactant molecules are expelled from an interface compressed past a maximum packing state. The model provided good agreement with experimental measurements for cycling rates from 1 to 100 cycles/min and for bulk concentrations between 0.0073 and 7.3 mg/ml.

  13. Surface tension dominates insect flight on fluid interfaces.

    Science.gov (United States)

    Mukundarajan, Haripriya; Bardon, Thibaut C; Kim, Dong Hyun; Prakash, Manu

    2016-03-01

    Flight on the 2D air-water interface, with body weight supported by surface tension, is a unique locomotion strategy well adapted for the environmental niche on the surface of water. Although previously described in aquatic insects like stoneflies, the biomechanics of interfacial flight has never been analysed. Here, we report interfacial flight as an adapted behaviour in waterlily beetles (Galerucella nymphaeae) which are also dexterous airborne fliers. We present the first quantitative biomechanical model of interfacial flight in insects, uncovering an intricate interplay of capillary, aerodynamic and neuromuscular forces. We show that waterlily beetles use their tarsal claws to attach themselves to the interface, via a fluid contact line pinned at the claw. We investigate the kinematics of interfacial flight trajectories using high-speed imaging and construct a mathematical model describing the flight dynamics. Our results show that non-linear surface tension forces make interfacial flight energetically expensive compared with airborne flight at the relatively high speeds characteristic of waterlily beetles, and cause chaotic dynamics to arise naturally in these regimes. We identify the crucial roles of capillary-gravity wave drag and oscillatory surface tension forces which dominate interfacial flight, showing that the air-water interface presents a radically modified force landscape for flapping wing flight compared with air.

  14. Effects of Induced Surface Tension in Nuclear and Hadron Matter

    CERN Document Server

    Sagun, V V; Ivanytskyi, A I; Oliinychenko, D R; Mishustin, I N

    2016-01-01

    Short range particle repulsion is rather important property of the hadronic and nuclear matter equations of state. We present a novel equation of state which is based on the virial expansion for the multicomponent mixtures with hard-core repulsion. In addition to the hard-core repulsion taken into account by the proper volumes of particles, this equation of state explicitly contains the surface tension which is induced by another part of the hard-core repulsion between particles. At high densities the induced surface tension vanishes and the excluded volume treatment of hard-core repulsion is switched to its proper volume treatment. Possible applications of this equation of state to a description of hadronic multiplicities measured in A+A collisions, to an investigation of the nuclear matter phase diagram properties and to the neutron star interior modeling are discussed.

  15. Effects of Induced Surface Tension in Nuclear and Hadron Matter

    Directory of Open Access Journals (Sweden)

    Sagun V.V.

    2017-01-01

    Full Text Available Short range particle repulsion is rather important property of the hadronic and nuclear matter equations of state. We present a novel equation of state which is based on the virial expansion for the multicomponent mixtures with hard-core repulsion. In addition to the hard-core repulsion taken into account by the proper volumes of particles, this equation of state explicitly contains the surface tension which is induced by another part of the hard-core repulsion between particles. At high densities the induced surface tension vanishes and the excluded volume treatment of hard-core repulsion is switched to its proper volume treatment. Possible applications of this equation of state to a description of hadronic multiplicities measured in A+A collisions, to an investigation of the nuclear matter phase diagram properties and to the neutron star interior modeling are discussed.

  16. Growth of fibroblasts and endothelial cells on wettability gradient surfaces

    NARCIS (Netherlands)

    Ruardy, TG; Moorlag, HE; Schakenraad, JM; VanderMei, HC; Busscher, HJ

    1997-01-01

    The growth, spreading, and shape of human skin fibroblasts (PK 84) and human umbilical cord endothelial cells on dichlorodimethylsilane (DDS) and dimethyloctadecylchlorosilane (DOGS) gradient surfaces were investigated in the presence of serum proteins. Gradient surfaces were prepared on glass using

  17. Enthalpic, entropic, and square gradient contributions to the surface energetics of amine-cured epoxy systems.

    Science.gov (United States)

    Mezzenga, Raffaele; Page, Stéphane A; Månson, Jan-Anders E

    2002-06-01

    The evolution of surface tension during polymerization of three amine-cured epoxy systems was investigated. Due to the chemical reaction of the epoxy groups with primary and secondary amines, the energetic status of an epoxy-amine system increased during polymerization. At the same time, the polymerization process induced entropic variations, also contributing to the evolution of surface energetics. A simple relation expressing the surface tension as a function of the bulk energy, the entropy of the system, and the square gradient of the polymer density was derived. The bulk and surface energetics were expressed in terms of solubility parameter and surface tension, respectively. The former was predicted using the Van Krevelen group contribution method, while the latter was directly measured using the Wilhelmy wetting method. Results indicated that, in all the three epoxy-amine systems under investigation, a unique relationship combining the surface tension, the bulk energy, the entropy, and the density square gradient of the system could be used. On the basis of the present study, and taking into account all contributory factors, it was concluded that the enthalpy component to the surface energetics is the dominant contribution.

  18. Comparing contact angle measurements and surface tension assessments of solid surfaces.

    Science.gov (United States)

    Cwikel, Dory; Zhao, Qi; Liu, Chen; Su, Xueju; Marmur, Abraham

    2010-10-05

    Four types of contact angles (receding, most stable, advancing, and "static") were measured by two independent laboratories for a large number of solid surfaces, spanning a large range of surface tensions. It is shown that the most stable contact angle, which is theoretically required for calculating the Young contact angle, is a practical, useful tool for wettability characterization of solid surfaces. In addition, it is shown that the experimentally measured most stable contact angle may not always be approximated by an average angle calculated from the advancing and receding contact angles. The "static" CA is shown in many cases to be very different from the most stable one. The measured contact angles were used for calculating the surface tensions of the solid samples by five methods. Meaningful differences exist among the surface tensions calculated using four previously known methods (Owens-Wendt, Wu, acid-base, and equation of state). A recently developed, Gibbsian-based correlation between interfacial tensions and individual surface tensions was used to calculate the surface tensions of the solid surfaces from the most stable contact angle of water. This calculation yielded in most cases higher values than calculated with the other four methods. On the basis of some low surface energy samples, the higher values appear to be justified.

  19. Calculation of interfacial tensions with gradient theory. I. Pure and Pseudo-Pure Fluids. II. Binary Systems

    DEFF Research Database (Denmark)

    Zuo, You-Xiang; Stenby, Erling Halfdan

    1997-01-01

    .26% at low pressure, and that of naphtha reformate cuts was 3.6%. In addition, the gradient theory was used to predict interfacial tensions for binary systems in the near-critical region. The results show excellent agreement between the predicted and experimental IFTs at high and moderate levels, while...

  20. Transparent, Superhydrophobic Surface with Varied Surface Tension Responsiveness in Wettability Based on Tunable Porous Silica Structure for Gauging Liquid Surface Tension.

    Science.gov (United States)

    Wang, Yan; Zhu, Yingjie; Zhang, Chunyang; Li, Jun; Guan, Zisheng

    2017-02-01

    Any solid surface can spontaneously exhibit variational wettability toward liquids with varied surface tension (γ). However, this correspondence has seldom been proposed or used on an artificial superhydrophobic surface, which should be more remarkable and peculiar. Herein, we fabricated robust, transparent superhydrophobic surfaces utilizing acid- and base-catalyzed silica (AC- and BC-silica) particles combined with candle soot template for structural construction and the CVD process for chemical modification. Three types of porous silica structures were devised, which presented distinctive surface tension responsiveness in wettability. Interestingly, all types of surfaces (i.e., AC-, AC/BC-, and BC-silica) show high repellence to high surface tension liquid (γ > 35 mN/m), and small differences are observed. With decreasing γ of the ethanol-water mixtures (γ superhydrophobic surfaces.

  1. Surface water waves due to an oscillatory wavemaker in the presence of surface tension

    Directory of Open Access Journals (Sweden)

    B. N. Mandal

    1992-01-01

    Full Text Available The initial value problem of generation of surface water waves by a harmonically oscillating plane vertical wavemaker in an infinite incompressible fluid under the action of gravity and surface tension is investigated. In the asymptotic evaluation of the free surface depression for large time and distance, the contribution to the integral by stationary phase method gives rise to transient component of the free surface depression while the contribution from the poles give rise to steady state component. It is observed that the presence of surface tension sometimes changes the qualitative nature of the transient component of free surface depression.

  2. Effects of varying interfacial surface tension on macroscopic polymer lenses

    Science.gov (United States)

    Zimmerman, Charlotte; White, Mason; Baylor, Martha-Elizabeth

    2015-09-01

    We investigate macroscopic polymer lenses (0.5- to 2.5-cm diameter) fabricated by dropping hydrophobic photocurable resin onto the surface of various hydrophilic liquid surfaces. Due to the intermolecular forces along the interface between the two liquids, a lens shape is formed. We find that we can vary the lens geometry by changing the region over which the resin is allowed to spread and the surface tension of the substrate to produce lenses with theoretically determined focal lengths ranging from 5 to 25 mm. These effects are varied by changing the container width, substrate composition, and substrate temperature. We present data for five different variants, demonstrating that we can control the lens dimensions for polymer lens applications that require high surface quality.

  3. On the surface tension of neutron star matter

    CERN Document Server

    Rueda, Jorge A; Wu, Yuan-Bin; Xue, She-Sheng

    2013-01-01

    It has been recently shown that taking into account strong, weak, electromagnetic, and gravitational interactions, and fulfilling the global charge neutrality of the system, a transition layer will happen between the core and crust of neutron stars, at the nuclear saturation density. We use relativistic mean field theory together with the Thomas-Fermi approximation to study the detailed structure of this transition layer and calculate its surface and Coulomb energy. We find that the surface tension is proportional to a power-law function of the baryon number density in the core bulk region. We also analyze the influence of the gravitational field and the electron component on the structure of the transition layer and the value of the surface tension to compare and contrast with known phenomenological results in nuclear physics. Based on the above results we study the instability against Bohr-Wheeler surface deformations in the case of neutron stars obeying global charge neutrality. Assuming the core-crust tra...

  4. Surface tension and quasi-emulsion of cavitation bubble cloud.

    Science.gov (United States)

    Bai, Lixin; Chen, Xiaoguang; Zhu, Gang; Xu, Weilin; Lin, Weijun; Wu, Pengfei; Li, Chao; Xu, Delong; Yan, Jiuchun

    2017-03-01

    A quasi-emulsion phenomenon of cavitation structure in a thin liquid layer (the thin liquid layer is trapped between a radiating surface and a hard reflector) is investigated experimentally with high-speed photography. The transformation from cloud-in-water (c/w) emulsion to water-in-cloud (w/c) emulsion is related to the increase of cavitation bubble cloud. The acoustic field in the thin liquid layer is analyzed. It is found that the liquid region has higher acoustic pressure than the cloud region. The bubbles are pushed from liquid region to cloud region by the primary Bjerknes forces. The rate of change of CSF increased with the increase of CSF. The cavitation bubbles on the surface of cavitation cloud are attracted by the cavitation bubbles inside the cloud due to secondary Bjerknes forces. The existence of surface tension on the interface of liquid region and cloud region is proved. The formation mechanism of disc-shaped liquid region and cloud region are analysed by surface tension and incompressibility of cavitation bubble cloud. Copyright © 2016 Elsevier B.V. All rights reserved.

  5. Steady needle growth with 3-D anisotropic surface tension

    Institute of Scientific and Technical Information of China (English)

    Xiao-jun CHEN; Yong-qiang CHEN; Jian-pu XU; Jian-jun XU

    2008-01-01

    The effect of the anisotropic interracial en-ergy on dendritic growth has been an important sub-ject, and has preoccupied many researchers in the field of materials science and condensed matter physics. The present paper is dedicated to the study of the effect of full 3-D anisotropic Surface tension on the steady state solution of dendritic growth. We obtain the analytical form of the first order approximation solution in the reg-ular asymptotic expansion around the Ivantsov's nee-dle growth solution, which extends the steady needle growth solution of the system with isotropic surface ten-sion obtained by Xu and Yu (J. J. Xu and D. S. Yu, J. Cryst. Growth, 1998, 187: 314; J. J. Xu, Interfa-cial Wave Theory of Pattern Formation: Selection of Dendrite Growth and Viscous Fingering in a Hele-Shaw Flow, Berlin: Springer-Verlag, 1997).The solution is expanded in the general Laguerre se-ries in any finite region around the needle-tip, and it is also expanded in a power series in the far field behind the tip. Both solutions are then numerically matched in the intermediate region. Based on this global valid solution, the dependence of Peclet number Pe and the interface's morphology on the anisotropy parameter of surface ten-sion as well as other physical parameters involved are determined. On the basis of this global valid solution, we explore the effect of the anisotropy parameter on the Peclet number of growth, as well as the morphology of the interface.

  6. Adhesion energy, surface traction and surface tension in liquid xenon

    Indian Academy of Sciences (India)

    B Mathew; G A Adebayo

    2011-12-01

    We calculated the adhesion energy, the surface traction and the surface energy of liquid xenon using molecular dynamics (MD) simulation. The value of the adhesion energy for liquid xenon at a reduced density of 0.630 was found to be 0.591 J/m2 and the surface traction has a peak at = 3.32 Å. It was observed that the attraction of the molecules in the liquid surface which produces a resistance to penetration decreases with temperature. This may be attributed to the greater average separation of molecules at higher temperature.

  7. Drop formation by thermal fluctuations at an ultralow surface tension.

    Science.gov (United States)

    Hennequin, Y; Aarts, D G A L; van der Wiel, J H; Wegdam, G; Eggers, J; Lekkerkerker, H N W; Bonn, Daniel

    2006-12-15

    We present experimental evidence that drop breakup is caused by thermal noise in a system with a surface tension that is more than 10(6) times smaller than that of water. We observe that at very small scales classical hydrodynamics breaks down and the characteristic signatures of pinch-off due to thermal noise are observed. Surprisingly, the noise makes the drop size distribution more uniform, by suppressing the formation of satellite droplets of the smallest sizes. The crossover between deterministic hydrodynamic motion and stochastic thermally driven motion has repercussions for our understanding of small-scale hydrodynamics, important in many problems such as micro- or nanofluidics and interfacial singularities.

  8. Experiments on buoyancy and surface tension following Galileo Galilei

    Science.gov (United States)

    Straulino, S.; Gambi, C. M. C.; Righini, A.

    2011-01-01

    We analyze passages of Galileo's writings on aspects of floating. Galileo encountered peculiar effects such as the "floating" of light objects made of dense material and the creation of large drops of water that were difficult to explain because they are related to our current understanding of surface tension. Even though Galileo could not understand the phenomenon, his proposed explanations and experiments are interesting from an educational point of view. We replicate the experiment on water and wine that was described by Galileo in his Two New Sciences.

  9. Surface tension propulsion of fungal spores by use of microdroplets

    CERN Document Server

    Noblin, Xavier; Dumais, Jacques

    2010-01-01

    Many edible mushrooms eject their spores (about 10 microns in size) at high speed (about 1 m/s) using surface tension forces in a few microseconds. Basically the coalescence of a droplet with the spore generates the necessary momentum to eject the spore. We have detailed this mechanism in \\cite{noblin2}. In this article, we give some details about the high speed movies (up to 250000 fps) of mushrooms' spores ejection attached to this submission. This video was submitted as part of the Gallery of Fluid Motion 2010 which is showcase of fluid dynamics videos.

  10. Surface tension driven shaping of adhesive microfluidic channel walls

    DEFF Research Database (Denmark)

    Janting, Jakob; Storm, Elisabeth K.; Geschke, Oliver

    2005-01-01

    The feasibility of making microfluidic channels with different wall geometries using adjacent lines of dispensed adhesive between substrates has been studied. Important parameters for the geometry have been identified to be: surface tension (adhesive / substrates), adhesive viscosity / thixotropy......, line height and distance, and temperature. Focus of the work has been on predicting the equilibrium geometries with FEM simulations using as input measured adhesive wetting angles, different adhesive line distances and height. The studied substrates are glass microscope slides, PEEK and PMMA....... The studied adhesives are DYMAX 9-20318-F, 3070, 9001 version 3.5, and Sylgard 184 PDMS....

  11. Using surface tension measurement in applications; Oberflaechenspannungsmesstechnik fuer den Prozesseinsatz

    Energy Technology Data Exchange (ETDEWEB)

    Haberland, R.; Krause, W. [SITA Messtechnik GmbH, Gostritzer Strasse 61-63, 01217 Dresden (Germany)

    2003-07-01

    When cleaning surfaces it is crucial for the process stability that the optimum surfactant concentration is maintained. The concentration of free surfactants can be measured by determining the surface tension. SITA Messtechnik has developed an innovative sensor based on the bubble pressure method. This sensor makes it possible to continuously measure surface tension with a high reliability. With this application for monitoring cleaning baths the potential to save money arises in regard to the use of raw materials, waste disposal and the costs resulting from undiscovered production failures. (Abstract Copyright [2003], Wiley Periodicals, Inc.) [German] Bei der Reinigung von Oberflaechen ist das Einhalten der optimalen Tensidkonzentration fuer die Prozesssicherheit entscheidend. Die Konzentration der freien Tenside ist messbar, indem die Oberflaechenspannung erfasst wird. Die SITA Messtechnik GmbH hat einen neuartigen Sensor auf der Basis der Blasendifferenzdruckmethode entwickelt, der eine kontinuierliche Messung der Oberflaechenspannung bei hoher Standzeit ermoeglicht. Mit dessen Anwendung zum Ueberwachen von Reinigungsbaedern ergeben sich Einsparpotentiale hinsichtlich Rohstoffeinsatz, Entsorgung und Fehlerfolgekosten. (Abstract Copyright [2003], Wiley Periodicals, Inc.)

  12. Surface Tension of Ab Initio Liquid Water at the Water-Air Interface

    CERN Document Server

    Nagata, Yuki; Bonn, Mischa; Kühne, Thomas D

    2016-01-01

    We report calculations of the surface tension of the water-air interface using ab initio molecular dynamics (AIMD) simulations. We investigate the simulation cell size dependence of the surface tension of water from force field molecular dynamics (MD) simulations, which show that the calculated surface tension increases with increasing simulation cell size, thereby illustrating that a correction for finite size effects is required for the small system used in the AIMD simulation. The AIMD simulations reveal that the double-{\\xi} basis set overestimates the experimentally measured surface tension due to the Pulay stress, while the triple and quadruple-{\\xi} basis sets give similar results. We further demonstrate that the van der Waals corrections critically affect the surface tension. AIMD simulations without the van der Waals correction substantially underestimate the surface tension, while van der Waals correction with the Grimme's D2 technique results in the value for the surface tension that is too high. T...

  13. Functional Design and Qualification of Surface Tension Propellant Tanks

    Science.gov (United States)

    Figus, C.; Haddad, D.; Ounougha, L.; Autric, J.

    2004-10-01

    During two decades, EADS Astrium has designed and qualified the surface tension device used in the propellant tanks equipping the Eurostar telecommunication satellites platforms. Recent re- orbiting phases of Eurostar E2000 satellites, have allowed to validate those designs and to graveyard the spacecraft with less than 1 kg of propellant left per tank. Moreover, with the emergence of new powerful satellites with full chemical or mixed chemical-plasma propulsion subsystems, EADS Astrium has designed a new larger and improved surface tension propellant tank. Such challenging performances require analyses, and tests in order to assess and confirm the predicted performances. The present article shows the recent development of a new enlarged Eurostar E3000 propellant tanks for Eurostar 3000 satellites and presents the main functional analyses and neutral buoyancy tests results obtained for this new propellant tank These last two years, have contributed to improve this background with the successful graveyard of the first Eurostar spacecraft with less than 1 kg of liquid propellant per tank at the end of the manoeuvre. Moreover, a new enlarged E3000 propellant tank has been designed and qualified in order to cope with the future 12 kW telecom spacecraft applications. This tank designed by EADS-ASTRIUM, is manufactured by EADS-Space transportation. This paper presents the performances and tests results obtained on this new propellant tank.

  14. The surface tension effect on viscous liquid spreading along a superhydrophobic surface

    Science.gov (United States)

    Aksenov, A. V.; Sudarikova, A. D.; Chicherin, I. S.

    2017-01-01

    Within the Stokes film approximation, unsteady plane-parallel spreading of a thin layer of a heavy viscous fluid along a horizontal superhydrophobic surface is studied. The forced spreading regimes induced by the mass supply are considered. Plane-parallel flow along the principal direction of the slip tensor of the superhydrophobic surface is studied in case that the corresponding slip tensor component is a power function of the spatial coordinate. An evolution equation for the film thickness is derived taking into account surface tension that is dependent on the spatial coordinate. The group classification problem is solved. Self-similar and invariant solutions are constructed for power and exponent time dependences on mass supply respectively at a special form of the surface tension coefficient. Surface tension is shown to have a significant influence on the character of the liquid spreading.

  15. Effect of surface tension on the mode selection of vertically excited surface waves in a circular cylindrical vessel

    Institute of Scientific and Technical Information of China (English)

    Jian Yong-Jun; E Xue-Quan; Zhang Jie; Meng Jun-Min

    2004-01-01

    Singular perturbation theory of two-time-scale expansions was developed in inviscid fluids to investigate patternforming, structure of the single surface standing wave, and its evolution with time in a circular cylindrical vessel subject to a vertical oscillation. A nonlinear slowly varying complex amplitude equation, which involves a cubic nonlinear term,an external excitation and the influence of surface tension, was derived from the potential flow equation. Surface tension was introduced by the boundary condition of the free surface in an ideal and incompressible fluid. The results show that when forced frequency is low, the effect of surface tension on the mode selection of surface waves is not important.However, when the forced frequency is high, the surface tension cannot be neglected. This manifests that the function of surface tension is to cause the free surface to return to its equilibrium configuration. In addition, the effect of surface tension seems to make the theoretical results much closer to experimental results.

  16. Size dependence of the surface tension of a free surface of an isotropic fluid

    Science.gov (United States)

    Burian, Sergii; Isaiev, Mykola; Termentzidis, Konstantinos; Sysoev, Vladimir; Bulavin, Leonid

    2017-06-01

    We report on the size dependence of the surface tension of a free surface of an isotropic fluid. The size dependence of the surface tension is evaluated based on the Gibbs-Tolman-Koenig-Buff equation for positive and negative values of curvatures and the Tolman lengths. For all combinations of positive and negative signs of curvature and the Tolman length, we succeed to have a continuous function, avoiding the existing discontinuity at zero curvature (flat interfaces). As an example, a water droplet in the thermodynamical equilibrium with the vapor is analyzed in detail. The size dependence of the surface tension and the Tolman length are evaluated with the use of experimental data of the International Association for the Properties of Water and Steam. The evaluated Tolman length of our approach is in good agreement with molecular dynamics and experimental data.

  17. Surface tension and reactive wetting in solder connections

    Energy Technology Data Exchange (ETDEWEB)

    Wedi, Andre; Schmitz, Guido [Institut fuer Materialphysik, Westf. Wilhelms-Universitaet, Wilhelm-Klemm-Strasse 10, 48149 Muenster (Germany)

    2011-07-01

    Wetting is an important pre-requisite of a reliable solder connection. However, it is only an indirect measure for the important specific energy of the reactive interface between solder and base metallization. In order to quantify this energy, we measured wetting angles of solder drops as well as surface tension of SnPb solders under systematic variation of composition and gaseous flux at different reflow temperatures. For the latter, we used the sessile drop method placing a solder drop on a glas substrate. From the two independent data sets, the important energy of the reactive interface is evaluated based on Young's equation. Remarkably, although both, the tension between the solder and flux and the wetting angle, reveal significant dependence on solder composition. So the adhesion energy reveals distinguished plateaus which are related to different reaction products in contact to the solder. TEM analysis and calculations of phase stabilities show that there is no Cu6Sn5 for high lead concentrations. The experiments confirm a model of reactive wetting by Eustathopoulos.

  18. Three-Dimensional Smoothed Particle Hydrodynamics Simulation for Liquid Droplet with Surface Tension

    CERN Document Server

    Terissa, Hanifa; Naa, Christian Fredy

    2013-01-01

    We provide a basic method of Smoothed Particle Hydrodynamics (SPH) to simulate liquid droplet with surface tension in three dimensions. Liquid droplet is a simple case for surface tension modeling. Surface tension works only on fluid surface. In SPH method, we simply apply the surface tension on the boundary particles of liquid. The particle on the 3D boundary was detected dynamically using Free-Surface Detection algorithm. The normal vector and curvature of the boundary surface were calculated simultaneously with 3D boundary surface reconstruction using Moving Least-Squares (MLS) method. Before the reconstruction, the coordinate system was transformed into a local coordinate system. Afterwards, the surface tension force which depends on curvature of the surface, was calculated and applied on the boundary particles of the droplet. We present the simulation result of droplet motion with gravity force. By using the basic method of SPH for fluid modeling, and a combination of 3D Free-Surface Detection algorithm ...

  19. Dependence of transcutaneous oxygen tension on local arteriovenous pressure gradient in normal subjects.

    Science.gov (United States)

    Wyss, C R; Matsen, F A; King, R V; Simmons, C W; Burgess, E M

    1981-05-01

    1. We studied the relationship between transcutaneous oxygen tension at the foot and local arteriovenous pressure difference in 15 normal men and women; arteriovenous pressure difference was varied by changing the height of the foot with respect to the heart and by applying external pressure to the foot. 2. Control transcutaneous oxygen tension was 67 +/- 9 SD mmHg (8.9 +/- 1.2 kPa) at a control arteriovenous pressure difference of 80 +/- 6 SD mmHg (10.6 +/- 0.8 kPa). 3. In every subject transcutaneous oxygen tension fell non-linearly with a decrease in arteriovenous pressure difference; transcutaneous oxygen tension was relatively insensitive to changes in arteriovenous pressure difference when arteriovenous pressure difference was high, but always fell sharply to zero at some positive arteriovenous pressure difference [range 13-34 mmHg (1.7-4.5 kPa)]. 4. An analysis of the data indicated that transcutaneous oxygen tension varied with arteriovenous pressure difference approximately as the oxygen tension of cutaneous venous blood under the sensor varied (in the absence of changes in cutaneous vascular resistance and oxygen consumption). 5. This analysis was supported by studies in three subjects in whom the oxygen tension of superficial venous drainage from a warmed hand or foot was measured along with transcutaneous oxygen tension while arteriovenous pressure difference was varied.

  20. Surface tension isotherms of the dioxane-acetone-water and glycerol-ethanol-water ternary systems

    Science.gov (United States)

    Dzhambulatov, R. S.; Dadashev, R. Kh.; Elimkhanov, D. Z.; Dadashev, I. N.

    2016-10-01

    The results of the experimental and theoretical studies of the concentration dependence of surface tension of aqueous solutions of the 1,4-dioxane-acetone-water and glycerol-ethanol-water ternary systems were given. The studies were performed by the hanging-drop method on a DSA100 tensiometer. The maximum error of surface tension was 1%. The theoretical models for calculating the surface tension of the ternary systems of organic solutions were analyzed.

  1. Structures and surface tensions of fluids near solid surfaces: an integral equation theory study.

    Science.gov (United States)

    Xu, Mengjin; Zhang, Chen; Du, Zhongjie; Mi, Jianguo

    2012-06-07

    In this work, integral equation theory is extended to describe the structures and surface tensions of confined fluids. To improve the accuracy of the equation, a bridge function based on the fundamental measure theory is introduced. The density profiles of the confined Lennard-Jones fluids and water are calculated, which are in good agreement with simulation data. On the basis of these density profiles, the grand potentials are then calculated using the density functional approach, and the corresponding surface tensions are predicted, which reproduce the simulation data well. In particular, the contact angles of water in contact with both hydrophilic and hydrophobic walls are evaluated.

  2. Onset of initial planar instability with surface-tension anisotropy during directional solidification.

    Science.gov (United States)

    Wang, Zhijun; Wang, Jincheng; Yang, Gencang

    2009-11-01

    A simple model is presented to describe the variation of the onset of the initial planar instability with surface tension anisotropy during directional solidification. The effect of surface-tension anisotropy on the incubation time and the initial average wavelength of planar instability are predicted by the simple model quantitatively, which are also verified by phase field simulation. Investigation results reveal that surface-tension anisotropy is one of important factors in the dynamic process of planar instability. The contribution of surface-tension anisotropy to the tilting modulation is also analyzed by comparing the results from the present simple model with those from phase field simulation.

  3. Surface tension of polymer melts - experimental investigations of its effect on polymer-polymer adhesion

    DEFF Research Database (Denmark)

    Jankova Atanasova, Katja; Islam, Mohammad Aminul; Hansen, Hans Nørgaard

    The surface tension of polymer melts is important for the bond strength of two component polymer parts through their roles in the process of wetting, adsorption and adhesion. This investigation deals with the influence of the melt surface tension and substrate surface energy on the polymer...

  4. Tensioned Fabric Structures with Surface in the Form of Chen-Gackstatter

    Directory of Open Access Journals (Sweden)

    Yee Hooi Min

    2016-01-01

    Full Text Available Form-finding has to be carried out for tensioned fabric structure in order to determine the initial equilibrium shape under prescribed support condition and prestress pattern. Tensioned fabric structures are normally designed to be in the form of equal tensioned surface. Tensioned fabric structure is highly suited to be used for realizing surfaces of complex or new forms. However, research study on a new form as a tensioned fabric structure has not attracted much attention. Another source of inspiration minimal surface which could be adopted as form for tensioned fabric structure is very crucial. The aim of this study is to propose initial equilibrium shape of tensioned fabric structures in the form of Chen-Gackstatter. Computational form-finding using nonlinear analysis method is used to determine the Chen-Gackstatter form of uniformly stressed surfaces. A tensioned fabric structure must curve equally in opposite directions to give the resulting surface a three dimensional stability. In an anticlastic doubly curved surface, the sum of all positive and all negative curvatures is zero. This study provides an alternative choice for structural designer to consider the Chen-Gackstatter applied in tensioned fabric structures. The results on factors affecting initial equilibrium shape can serve as a reference for proper selection of surface parameter for achieving a structurally viable surface.

  5. Surface tension of molten Ni-(Cr, Co, W) alloys and segregation of elements

    Institute of Scientific and Technical Information of China (English)

    XIAO Feng; LIU Lan-xiao; YANG Ren-hui; ZHAO Hong-kai; FANG Liang; ZHANG Chi

    2008-01-01

    Surface tension of molten Ni-(Cr, Co, W) alloys was measured at the temperature of 1 773-1 873 K in an Ar+3%H2 atmosphere using an improved sessile drop method. The segregation of Cr, Co and W in alloy was calculated and analyzed using Butler's equation. The results show a good agreement between measured and calculated data. The surface tension of molten Ni-(Cr,Co, W) alloys decreases with increasing temperature. In Ni-(Cr, Co, W) alloys, the element with lower surface tension tends to segregate on the surface of molten alloy while that with higher surface tension tends to segregate inside of the molten alloy. The larger the differences in surface tension, atom radius and electron configuration between solvent and solute are, the more significant the segregation is. As a result, Ni segregates onto the surface and Co and W segregate inside the alloys.

  6. Survismeter, 3-in-1 Instrument for Simultaneous Measurements of Surface Tension, Inter Facial Tension (IFT and Viscosity

    Directory of Open Access Journals (Sweden)

    Man Singh

    2007-12-01

    Full Text Available The article presents Inter Facial Tension (IFT (ift, N m-1 of benzene-water; surface tensions (, N m-1 and viscosities (, N s m-2 of ethanol, glycerol, ethyl acetate, n-hexane, diethyl ether, chloroform, benzene, carbon tetrachloride [CCl4], formic acid, measured with Survismeter with ± 1.1x10-5 N m-1, ± 1.3x10-5 N m-1 and ± 1.1x10-6 N s m-2 accuracies respectively. Also the surface tension and viscosities of carboxymethylcellulose (CMC, dodecylbenzenesulfonicacid (DBSA and tetramethylammoniumhydroxide (TMAH in aqueous media have been measured with survismeter at 298.15 K. IFT of water and benzene interface was determined with survismeter. The survismeter saves resources, user’s efforts and infrastructure more than 80 % as compared to usual methods and prevents 80% disposal of materials to environment. It very accurately measures surface tension and IFT of volatile and poisonous liquids at any desired temperatures as liquids are jacked (jacketed in closed glass made bulbs.

  7. Mapping surface tension induced menisci with application to tensiometry and refractometry.

    Science.gov (United States)

    Mishra, Avanish; Kulkarni, Varun; Khor, Jian-Wei; Wereley, Steve

    2015-07-28

    In this work, we discuss an optical method for measuring surface tension induced menisci. The principle of measurement is based upon the change in the background pattern produced by the curvature of the meniscus acting as a lens. We measure the meniscus profile over an inclined glass plate and utilize the measured meniscus for estimation of surface tension and refractive index.

  8. Prediction of viscosities and surface tensions of fuels using a new corresponding states model

    DEFF Research Database (Denmark)

    Queimada, A.J.; Rolo, L.I.; Caco, A.I.

    2006-01-01

    While some properties of diesels are cheap, easy and fast to measure, such as densities, others such as surface tensions and viscosities are expensive and time consuming. A new approach that uses some basic information such as densities to predict viscosities and surface tensions is here proposed...

  9. Criticality and surface tension in rotating horizon thermodynamics

    Science.gov (United States)

    Hansen, Devin; Kubizňák, David; Mann, Robert B.

    2016-08-01

    We study a modified horizon thermodynamics and the associated criticality for rotating black hole spacetimes. Namely, we show that under a virtual displacement of the black hole horizon accompanied by an independent variation of the rotation parameter, the radial Einstein equation takes a form of a ‘cohomogeneity two’ horizon first law, δ E=Tδ S+{{Ω }}δ J-σ δ A, where E and J are the horizon energy (an analogue of the Misner-Sharp mass) and the horizon angular momentum, Ω is the horizon angular velocity, A is the horizon area, and σ is the surface tension induced by the matter fields. For fixed angular momentum, the above equation simplifies and the more familiar (cohomogeneity one) horizon first law δ E=Tδ S-Pδ V is obtained, where P is the pressure of matter fields and V is the horizon volume. A universal equation of state is obtained in each case and the corresponding critical behavior is studied.

  10. Criticality and Surface Tension in Rotating Horizon Thermodynamics

    CERN Document Server

    Hansen, Devin; Mann, Robert B

    2016-01-01

    We study a modified horizon thermodynamics and the associated criticality for rotating black hole spacetimes. Namely, we show that under a virtual displacement of the black hole horizon accompanied by an independent variation of the rotation parameter, the radial Einstein equation takes a form of a "cohomogeneity two" horizon first law, $dE=TdS+\\Omega dJ-\\sigma dA$, where $E$ and $J$ are the horizon energy (an analogue of the Misner-Sharp mass) and the horizon angular momentum, $\\Omega$ is the horizon angular velocity, $A$ is the horizon area, and $\\sigma$ is the surface tension induced by the matter fields. For fixed angular momentum, the above equation simplifies and the more familiar (cohomogeneity one) horizon first law $dE=TdS-PdV$ is obtained, where $P$ is the pressure of matter fields and $V$ is the horizon volume. A universal equation of state is obtained in each case and the corresponding critical behavior is studied.

  11. Effects of alternative electromagnetic field on surface tension and filling ability of molten metal

    Institute of Scientific and Technical Information of China (English)

    HE Hong-liang; KANG Fu-wei; WANG Li-ping

    2005-01-01

    Surface tension and filling ability of molten metal play an important role on the shaping of the molten metal. The surface tension was calculated from wetting angles of the molten metal by the sessile drop method. The specimen for filling ability was designed and the filling ability experiments under the alternative electromagnetic field were performed. The results show that the intensity and frequency of the alternative electromagnetic field have significant effects on the surface tension of the molten metal. The surface tension of Al-6%Si alloy decreases with increasing the intensity of the electromagnetic field. For pure Sn, the surface tension decreases gradually when the frequency of electromagnetic field is reduced. The filling ability is improved by applying the alternative electromagnetic field.

  12. Thermodynamic Modeling of Surface Tension of Aqueous Electrolyte Solution by Competitive Adsorption Model

    Directory of Open Access Journals (Sweden)

    Mohamad Javad Kamali

    2015-01-01

    Full Text Available Thermodynamic modeling of surface tension of different electrolyte systems in presence of gas phase is studied. Using the solid-liquid equilibrium, Langmuir gas-solid adsorption, and ENRTL activity coefficient model, the surface tension of electrolyte solutions is calculated. The new model has two adjustable parameters which could be determined by fitting the experimental surface tension of binary aqueous electrolyte solution in single temperature. Then the values of surface tension for other temperatures in binary and ternary system of aqueous electrolyte solution are predicted. The average absolute deviations for calculation of surface tension of binary and mixed electrolyte systems by new model are 1.98 and 1.70%, respectively.

  13. Molecular modelling and simulation of the surface tension of real quadrupolar fluids

    CERN Document Server

    Werth, Stephan; Klein, Peter; Küfer, Karl-Heinz; Horsch, Martin; Hasse, Hans

    2014-01-01

    Molecular modelling and simulation of the surface tension of fluids with force fields is discussed. 29 real fluids are studied, including nitrogen, oxygen, carbon dioxide, carbon monoxide, fluorine, chlorine, bromine, iodine, ethane, ethylene, acetylene, propyne, propylene, propadiene, carbon disulfide, sulfur hexafluoride, and many refrigerants. The fluids are represented by two-centre Lennard-Jones plus point quadrupole models from the literature. These models were adjusted only to experimental data of the vapour pressure and saturated liquid density so that the results for the surface tension are predictions. The deviations between the predictions and experimental data for the surface tension are of the order of 20 percent. The surface tension is usually overestimated by the models. For further improvements, data on the surface tension can be included in the model development. A suitable strategy for this is multi-criteria optimization based on Pareto sets. This is demonstrated using the model for carbon d...

  14. Surface tension of polymer melts - experimental investigations of its effect on polymer-polymer adhesion

    DEFF Research Database (Denmark)

    Jankova Atanasova, Katja; Islam, Mohammad Aminul; Hansen, Hans Nørgaard

    The surface tension of polymer melts is important for the bond strength of two component polymer parts through their roles in the process of wetting, adsorption and adhesion. This investigation deals with the influence of the melt surface tension and substrate surface energy on the polymer......-polymer bond strength during two component polymer processing. Polymer materials PS, POM, ABS, PEl, PEEK and PC are chosen for the investigation. Pendant drop method showed that in case of PS and POM, the melt surface tension was decreased with increasing temperature. The substrate surface energies....... The results and discussion presented in this paper reflect the temperature dependent behaviours of the surface tension and surface energy of polymers and their effects on the polymer-polymer bond strength....

  15. Surface tension of polymer melts - experimental investigations of its effects on polymer-polymer adhesion

    DEFF Research Database (Denmark)

    Islam, Mohammad Aminul; Jankova Atanasova, Katja; Hansen, Hans Nørgaard

    The surface tension of polymer melts is important for the bond strength of two component polymer parts through their roles in the process of wetting, adsorption and adhesion. This investigation deals with the influence of the melt surface tension and substrate surface energy on the polymer......-polymer bond strength during two component polymer processing. Polymer materials PS, POM, ABS, PEI, PEEK and PC are chosen for the investigation. Pendant drop method showed that in case of PS and POM, the melt surface tension was decreased with increasing temperature. The substrate surface energies....... The results and discussion presented in this paper reflect the temperature dependent behaviours of the surface tension and surface energy of polymers and their effects on the polymer-polymer bond strength....

  16. Surface tension and related thermodynamic parameters of alcohols using the Traube stalagmometer

    Science.gov (United States)

    Dilmohamud, B. A.; Seeneevassen, J.; Rughooputh, S. D. D. V.; Ramasami, P.

    2005-11-01

    An apparatus was devised using the Traube Stalagmometer for the determination of the surface tension of the alcohols methanol, ethanol, propan-1-ol and butan-1-ol. Measurements were made under atmospheric pressure at temperatures between 288.15 K and 313.15 K. The surface tension values were correlated with temperature and surface thermodynamic parameters, namely surface entropy and surface enthalpy, were also calculated. The results obtained are in agreement with the literature and they are promising for the use of this low cost arrangement for accurate measurement of surface tension. Surface tension values were obtained with a maximum error of 0.5 mN m-1 and a maximum standard deviation of 0.8 mN m-1. We recommend this arrangement for students in advanced university courses and it can also be used for research work.

  17. Surface tension effects on vertical upward annular flows in a small diameter pipe

    Energy Technology Data Exchange (ETDEWEB)

    Sadatomi, Michio, E-mail: sadatomi@mech.kumamoto-u.ac.jp [Dept. of Advanced Mechanical Systems, Kumamoto Univ., 39-1, Kurokami 2-chome, Chuou-ku, Kumamoto 860-8555 (Japan); Kawahara, Akimaro [Dept. of Advanced Mechanical Systems, Kumamoto Univ., 39-1, Kurokami 2-chome, Chuou-ku, Kumamoto 860-8555 (Japan); Suzuki, Aruta [Plant Design & Engineering Dept., Environment, Energy & Plant Headquarters, Hitachi Zosen Corporation, 7-89, Nankokita 1-chome, Suminoe-ku, Osaka, 559-8559 (Japan)

    2016-12-15

    Highlights: • Surface tension effects were clarified on annular flow in a small diameter pipe. • The mean liquid film thickness became thinner with decreasing of surface tension. • The liquid droplet fraction and the interfacial shear stress became higher with it. • New prediction methods for the above parameters were developed and validated. - Abstract: Experiments were conducted to study the surface tension effects on vertical upward annular flows in a 5 mm I.D. pipe using water and low surface tension water with a little surfactant as the test liquid and air as the test gas. Firstly, the experimental results on the mean liquid film thickness, the liquid droplet fraction and the interfacial shear stress in annular flows together with some flow pictures are presented to clarify the surface tension effects. From these, the followings are clarified: In the low surface tension case, the liquid film surface becomes rough, the liquid film thickness thin, the liquid droplet fraction high, and the interfacial shear stress high. Secondary, correlations in literatures for the respective parameters are tested against the present data. The test results show that no correlation for the respective parameters could predict well the present data. Thus, correlations are revised by accounting for the surface tension effects. The results of the experiments, the correlations tests and their revisions mentioned above are presented in the present paper.

  18. Effect of surface tension on SiO2 -methanol nanofluids

    Science.gov (United States)

    Bhuiyan, M. H. U.; Saidur, R.; Amalina, M. A.; Mostafizur, R. M.

    2015-09-01

    Surface tension, the cohesive energy of an interface dominated the transportation behaviour of the liquids play an important role in the heat transfer performance. A new class of heat transfer fluid denoting “Nanofluids” with impressive thermo-physical properties, proved its promising potentiality in the heat transfer performance. However, very few numbers of studies observed for the effect of nanoparticles on the surface tension of liquids, also noted controversial results. In the present study, SiO2 nanoparticles dispersed in methanol solution to investigate the effect of surface tension with the change of concentration and their sizes. The most common Du-Nouy ring method was used to measure the surface tension of methanol based nanofluids by an automatic surface tensiometer.The results denote that the surface tension of the nanofluids increases with increase in concentration. On the other hand, the results indicate that the surface tension decreases with the increase in temperatures. Besides, the surface tension of SiO2-methanol nanofluids enhances compared to pure methanol. All in all, the enhancement observed 1.7% to 8.9% of the variation of volume fractions (0.05 Vol % to 0.25 Vol %) and the temperature change of 25 °C to 50 °C.

  19. Semi-implicit surface tension formulation with a Lagrangian surface mesh on an Eulerian simulation grid

    KAUST Repository

    Schroeder, Craig

    2012-02-01

    We present a method for applying semi-implicit forces on a Lagrangian mesh to an Eulerian discretization of the Navier Stokes equations in a way that produces a sparse symmetric positive definite system. The resulting method has semi-implicit and fully-coupled viscosity, pressure, and Lagrangian forces. We apply our new framework for forces on a Lagrangian mesh to the case of a surface tension force, which when treated explicitly leads to a tight time step restriction. By applying surface tension as a semi-implicit Lagrangian force, the resulting method benefits from improved stability and the ability to take larger time steps. The resulting discretization is also able to maintain parasitic currents at low levels. © 2011.

  20. Thermally tailored gradient topography surface on elastomeric thin films.

    Science.gov (United States)

    Roy, Sudeshna; Bhandaru, Nandini; Das, Ritopa; Harikrishnan, G; Mukherjee, Rabibrata

    2014-05-14

    We report a simple method for creating a nanopatterned surface with continuous variation in feature height on an elastomeric thin film. The technique is based on imprinting the surface of a film of thermo-curable elastomer (Sylgard 184), which has continuous variation in cross-linking density introduced by means of differential heating. This results in variation of viscoelasticity across the length of the surface and the film exhibits differential partial relaxation after imprinting with a flexible stamp and subjecting it to an externally applied stress for a transient duration. An intrinsic perfect negative replica of the stamp pattern is initially created over the entire film surface as long as the external force remains active. After the external force is withdrawn, there is partial relaxation of the applied stresses, which is manifested as reduction in amplitude of the imprinted features. Due to the spatial viscoelasticity gradient, the extent of stress relaxation induced feature height reduction varies across the length of the film (L), resulting in a surface with a gradient topography with progressively varying feature heights (hF). The steepness of the gradient can be controlled by varying the temperature gradient as well as the duration of precuring of the film prior to imprinting. The method has also been utilized for fabricating wettability gradient surfaces using a high aspect ratio biomimetic stamp. The use of a flexible stamp allows the technique to be extended for creating a gradient topography on nonplanar surfaces as well. We also show that the gradient surfaces with regular structures can be used in combinatorial studies related to pattern directed dewetting.

  1. An Unusual Variation of Surface Tension with Concentration of.Mixed Cationic-anionic Surfactants

    Institute of Scientific and Technical Information of China (English)

    肖进新; 暴艳霞

    2001-01-01

    There are two platforms in the surface tension vs. concentration curve (γ-lgC curve) of cationic-anionic surfactant mixtures. The first platform is the same as that of common surfactant solution, and the cross point is the CMC. After the CMC, the mixtures form precipitate. At higher concentration, the mixtures form homogeneous sloution.When the mixtures form homogeneous solution at high concentration. surface tension increases with concentration, the becomes constant.So the γ-lgC curve exhibits the second platform. The surface tension at the second platform increases by increasing molar ratio of two surfactants and polar group size of surfactants, and decreases with adding inorganic salts.

  2. The role of surface tension on the elastic decohesion of polymeric filaments

    DEFF Research Database (Denmark)

    Rasmussen, Henrik K.; Hassager, Ole

    2001-01-01

    We simulate the rapid extension of polymeric filaments between parallel plates with special attention to the role of surface tension in the symmetry breaking aximuthal instability that may occur near the end plates. The instability is viewed as a precursor to the eventual elastic decohesion...... of the filament from the plate. It is demonstrated that high Deborah numbers are needed to initiate the instability and that surface tension provides a wavenumber selection. Moreover, the surface tension has a stabilising effect on the end plate instability....

  3. A surface tension based method for measuring oil dispersant concentration in seawater.

    Science.gov (United States)

    Cai, Zhengqing; Gong, Yanyan; Liu, Wen; Fu, Jie; O'Reilly, S E; Hao, Xiaodi; Zhao, Dongye

    2016-08-15

    This work developed a new method to determine concentration of Corexit EC9500A, and likely other oil dispersants, in seawater. Based on the principle that oil dispersants decrease surface tension, a linear correlation was established between the dispersant concentration and surface tension. Thus, the dispersant concentration can be determined by measuring surface tension. The method can accurately analyze Corexit EC9500A in the concentration range of 0.5-23.5mg/L. Minor changes in solution salinity (oil dispersants in water/seawater, which has been desired by the oil spill research community and industries.

  4. Hydrophobicity, surface tension, and zeta potential measurements of glass-reinforced hydroxyapatite composites.

    Science.gov (United States)

    Lopes, M A; Monteiro, F J; Santos, J D; Serro, A P; Saramago, B

    1999-06-15

    Wettability and zeta potential studies were performed to characterize the hydrophobicity, surface tension, and surface charge of P2O5-glass-reinforced hydroxyapatite composites. Quantitative phase analysis was performed by the Rietveld method using GSAS software applied to X-ray diffractograms. Surface charge was assessed by zeta potential measurements. Protein adsorption studies were performed using vitronectin. Contact angles and surface tensions variation with time were determined by the sessile and pendent drop techniques, respectively, using ADSA-P software. The highest (-18.1 mV) and lowest (-28.7 mV) values of zeta potential were found for hydroxyapatite (HA) and beta-tricalcium phosphate (beta-TCP), respectively, with composite materials presenting values in between. All studied bioceramic materials showed similar solid surface tension. For HA and beta-TCP, solid surface tensions of 46.7 and 45.3 mJ/m2, respectively, were obtained, while composites presented intermediate surface tension values. The dispersive component of surface tension was the predominant one for all materials studied. Adhesion work values between the vitronectin solution and HA and beta-TCP were found to be 79.8 and 88.0 mJ/m2, respectively, while the 4.0 wt % glass composites showed slightly lower values than the 2.5 wt % ones. The presence of beta-TCP influenced surface charge, hydrophobicity, and protein adsorption of the glass-reinforced HA composites, and therefore indirectly affected cell-biomaterial interactions.

  5. Calculation of interfacial tensions with gradient theory. I. Pure and Pseudo-Pure Fluids. II. Binary Systems

    DEFF Research Database (Denmark)

    Zuo, You-Xiang; Stenby, Erling Halfdan

    1997-01-01

    In this research work, the gradient theory (GT) of inhomogeneous fluids was used to calculate interfacial tensions (IFTs). The correlations of the influence parameter are presented for pure hydrocarbons, which can improve the scaling behavior of pure fluids under near-critical conditions. The ove...... the agreement is reasonably accurate in the near-critical region as the models reveal classical scaling behavior. To predict low IFTs accurately ((sigma)....... The overall average absolute deviations (ADDs) of the calculated IFTs from the GT model with the SRK, PR and PT equations of state (EOS´s) for 86 non-polar and weakly polar pure substances are 2.34%, 2.10% and 2.29%, respectively. At low pressure, the lumping method proposed by Leibovici [Leibovici, C.F, 1993...

  6. [Determination of critical surface tension--a comparison of 2 methods].

    Science.gov (United States)

    Lippold, B C; Ohm, A

    1988-03-01

    Two methods for the determination of the critical surface tension (gamma c) of pharmaceutical powders are compared: the so called "sinking-technique", which works by measuring the complete sinking of powders in liquids of varying surface tension and the determination of the critical surface tension by measuring the contact angle in dependence on the surface tension of wetting solvent/water-mixtures by means of the sessile drop-technique. The simple sinking-technique gives gamma c-values which only show a moderate degree of agreement with those determined by the sessile drop-technique. Thus the values determined by the sinking-technique are usually 1-3 mN/m higher than those determined by the sessile drop-technique.

  7. Interfacial tension and surface pressure of high density lipoprotein, low density lipoprotein, and related lipid droplets

    National Research Council Canada - National Science Library

    Ollila, O H Samuli; Lamberg, Antti; Lehtivaara, Maria; Koivuniemi, Artturi; Vattulainen, Ilpo

    2012-01-01

    .... Interfacial tension and surface pressure of these particles are of great interest because they are related to the shape and the stability of the droplets and to protein adsorption at the interface...

  8. A Surface Tension Model for Liquid Mixtures Based on NRTL Equation

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A new equation for predicting surface tension is proposed based on the thermodynamic definition of surface tension and the expression of the Gibbs free energy of the system. Using the NRTL equation to represent the excess Gibbs free energy, a two-parameter surface tension equation is derived. The feasibility of the new equation has been tested in terms of 124 binary and 16 multicomponent systems(13-ternary and 3-quaternary) with absolute relative deviations of 0.59% and 1.55% respectively. This model is also predictive for the temperature dependence of surface tension of liquid mixtures. It is shown that, with good accuracy, this equation is simple and reliable for practical use.

  9. Molecular dynamics simulations of the surface tension of oxygen-supersaturated water

    Directory of Open Access Journals (Sweden)

    S. Jain

    2017-04-01

    Full Text Available In this work, non-reactive molecular dynamic simulations were conducted to determine the surface tension of water as a function of the concentration of the dissolved gaseous molecules (O2, which would in turn help to predict the pressure inside the nanobubbles under supersaturation conditions. Knowing the bubble pressure is a prerequisite for understanding the mechanisms behind the spontaneous combustion of the H2/O2 gases inside the nanobubbles. First, the surface tension of pure water was determined using the planar interface method and the Irving and Kirkwood formula. Next, the surface tension of water containing four different supersaturation concentrations (S of O2 gas molecules was computed considering the curved interface of a nanobubble. The surface tension of water was found to decrease with an increase in the supersaturation ratio or the concentration of the dissolved O2 gas molecules.

  10. Computing masses and surface tension from effective transfer matrices

    CERN Document Server

    Hasenbusch, M; Pinn, K

    1994-01-01

    We propose an effective transfer-matrix method that allows a measurement of tunnelling correlation lengths that are orders of magnitude larger than the lattice extension. Combining this method with a particularly efficient implementation of the multimagnetical algorithm we were able to determine the interface tension of the 3D Ising model close to criticality with a relative error of less than 1 per cent.

  11. Critical-point analysis of the liquid-vapor interfacial surface tension

    Science.gov (United States)

    Salvino, R. E.

    1990-01-01

    The interfacial surface tension of the liquid-vapor system is analyzed near the critical point in a manner similar to bulk thermodynamic critical-point analyses. This is accomplished by a critical-point analysis of the single-phase hard-wall surface tension. Both a Landau expansion and a scaling theory equation of state are investigated. Some general exponent relations are derived and, in addition, some thermodynamically defined correlation lengths are discussed.

  12. Surface tension phenomena in the xylem sap of three diffuse porous temperate tree species.

    Science.gov (United States)

    Christensen-Dalsgaard, Karen K; Tyree, Melvin T; Mussone, Paolo G

    2011-04-01

    In plant physiology models involving bubble nucleation, expansion or elimination, it is typically assumed that the surface tension of xylem sap is equal to that of pure water, though this has never been tested. In this study we collected xylem sap from branches of the tree species Populus tremuloides, Betula papyrifera and Sorbus aucuparia over 3 months. We measured the instantaneous surface tension and followed changes over a period of 0.5-5 h using the pendant drop technique. In all three species the instantaneous surface tension was equal to or within a few percent of that of pure water. Further, in B. papyrifera and S. aucuparia the change over time following drop establishment, although significant, was very small. In P. tremuloides, however, there was a steep decline in surface tension over time that leveled off towards values 21-27% lower than that of pure water. This indicated the presence of surfactants. The values were lower for thinner distal branch segments than for proximal ones closer to the trunk. In some species it appears valid to assume that the surface tension of xylem sap is equal to that of water. However, in branch segments of P. tremuloides close to the terminal bud and hence potentially in other species as well, it may be necessary to take into account the presence of surfactants that reduce the surface tension over time.

  13. Surface tension of nitric oxide and its binary mixtures with krypton, methane, and ethene

    Energy Technology Data Exchange (ETDEWEB)

    Calado, J.C.G.; Santos Mendonca, A.F.S. dos; Saramago, B.J.V.; Soares, V.A.M. [Instituto Superior Tecnico, Lisbon (Portugal). Centro de Quimica Estrutural

    1997-05-15

    The surface tension of three binary liquid mixtures of NO with Kr, CH{sub 4}, and C{sub 2}H{sub 4} has been determined as a function of composition in the temperature range 102.0 to 119.0 K. These measurements are a contribution to the study of binary liquid mixtures in which one component is unassociated while the molecules of the other can associate between themselves. Nitric oxide is the simplest molecule capable of forming dimers, but not larger aggregates. This results in the surface tension of liquid nitric oxide having a strong temperature dependence: when the temperature increases the degree of dimerization decreases, contributing to a larger decrease of the surface tension. The surface tension of NO mixtures shows strong deviations from ideality. The mixtures containing Kr and CH{sub 4} exhibit negative deviations, while for the NO + C{sub 2}H{sub 4} system the surface tension shows a complex dependence on the composition. This strong departure from ideality had already been found for the bulk properties of these three systems. The surface tension of the CH{sub 4} + Kr system, already well characterized in the literature, was also measured to test the equipment.

  14. Effects of internal pressure and surface tension on the growth-induced wrinkling of mucosae.

    Science.gov (United States)

    Xie, Wei-Hua; Li, Bo; Cao, Yan-Ping; Feng, Xi-Qiao

    2014-01-01

    Surface wrinkling of mucosae is crucial for the biological functions of many living tissues. In this paper, we investigate the instability of a cylindrical tube consisting of a mucosal layer and a submucosal layer. Our attention is focused on the effects of internal pressure and surface tension on the critical condition and mode number of surface wrinkling induced by tissue growth. It is found that the internal pressure plays a stabilizing role but basically has no effect on the critical mode number. Surface tension also stabilizes the system and reduces the critical mode number of surface patterns. Besides, the thinner the mucosal layer, the more significant the effect of surface tension. This work may help gain insights into the surface wrinkling and morphological evolution of such tubular organs as airways and esophagi. Copyright © 2013 Elsevier Ltd. All rights reserved.

  15. Surface Tension, Surface Stiffness, and Surface Width of the 3-dimensional Ising Model on a Cubic Lattice

    CERN Document Server

    Hasenbusch, M.; Hasenbusch, Martin; Pinn, Klaus

    1992-01-01

    We compute properties of the interface of the 3-dimensional Ising model for a wide range of temperatures and for interface extensions up to 64 by 64. The interface tension sigma is obtained by integrating the surface energy density over the inverse temperature beta. The surface stiffness coefficient kappa is determined. We also study universal quantities like xi^2 sigma and xi^2 kappa. The behavior of the interfacial width on lattices up to 512 times 512 times 27 is also investigated.

  16. Computer modelling of the surface tension of the gas-liquid and liquid-liquid interface.

    Science.gov (United States)

    Ghoufi, Aziz; Malfreyt, Patrice; Tildesley, Dominic J

    2016-03-07

    This review presents the state of the art in molecular simulations of interfacial systems and of the calculation of the surface tension from the underlying intermolecular potential. We provide a short account of different methodological factors (size-effects, truncation procedures, long-range corrections and potential models) that can affect the results of the simulations. Accurate calculations are presented for the calculation of the surface tension as a function of the temperature, pressure and composition by considering the planar gas-liquid interface of a range of molecular fluids. In particular, we consider the challenging problems of reproducing the interfacial tension of salt solutions as a function of the salt molality; the simulations of spherical interfaces including the calculation of the sign and size of the Tolman length for a spherical droplet; the use of coarse-grained models in the calculation of the interfacial tension of liquid-liquid surfaces and the mesoscopic simulations of oil-water-surfactant interfacial systems.

  17. Quantification of surface tension and internal pressure generated by single mitotic cells.

    Science.gov (United States)

    Fischer-Friedrich, Elisabeth; Hyman, Anthony A; Jülicher, Frank; Müller, Daniel J; Helenius, Jonne

    2014-08-29

    During mitosis, adherent cells round up, by increasing the tension of the contractile actomyosin cortex while increasing the internal hydrostatic pressure. In the simple scenario of a liquid cell interior, the surface tension is related to the local curvature and the hydrostatic pressure difference by Laplace's law. However, verification of this scenario for cells requires accurate measurements of cell shape. Here, we use wedged micro-cantilevers to uniaxially confine single cells and determine confinement forces while concurrently determining cell shape using confocal microscopy. We fit experimentally measured confined cell shapes to shapes obeying Laplace's law with uniform surface tension and find quantitative agreement. Geometrical parameters derived from fitting the cell shape, and the measured force were used to calculate hydrostatic pressure excess and surface tension of cells. We find that HeLa cells increase their internal hydrostatic pressure excess and surface tension from ≈ 40 Pa and 0.2 mNm(-1) during interphase to ≈ 400 Pa and 1.6 mNm(-1) during metaphase. The method introduced provides a means to determine internal pressure excess and surface tension of rounded cells accurately and with minimal cellular perturbation, and should be applicable to characterize the mechanical properties of various cellular systems.

  18. Prediction of surface and interfacial tension based on thermodynamic data and CALPHAD approach

    Institute of Scientific and Technical Information of China (English)

    QIAO Zhiyu; CAO Zhanmin; Tanaka Toshihiro

    2006-01-01

    In this article, following a brief introduction concerning experimental measurements of surface and interfacial tensions, methods for calculating surface tension and surface segregation for binary, ternary, and multicomponent high-temperature melts based on Bulter's original treatment [1 ] and on available physical properties and thermodynamic data, especially excess Gibbs free energies of bulk phase and surface phase versus temperature obtained from thermodynamic databases using the calculation of phase diagram (CALPHAD) approach, with special attention to the model parameter β, have been described. In addition, the geometric models can be extended to predict surface tensions of multicom ponent systems from those of sub-binary systems. For illustration, some calculated examples, including Pb-free soldering systems and phase-diagram evaluation of binary alloys in nanoparticle systems are given. On the basis of surface tensions of high-temperature melts, interfacial tensions between liquid alloy and molten slag as well as molten slag and molten matter can be calculated using the Girifalco-Good equation [2]. Modifications are suggested in the Nishizawa's model [3] for estimation of interfacial tension in liquid metal (A)/ceramics (MX) systems so that the calculations can be carried out based on the sublattice model and thermodynamic data, without deliberately differentiating the phase of MX at high temperature. Finally, the derivation of an approximate expression for predicting interfacial tension between the high-temperature multicomponent melts, employing Becket's model [4] in conjunction with Bulter's equation and interfacial tension data of the simple systems is described, and some examples concerning pyrometallurgical systems are given for better understanding.

  19. Surface Tension of Acid Solutions: Fluctuations beyond the Non-linear Poisson-Boltzmann Theory

    CERN Document Server

    Markovich, Tomer; Podgornik, Rudi

    2016-01-01

    We extend our previous study of surface tension of ionic solutions and apply it to the case of acids (and salts) with strong ion-surface interactions. These ion-surface interactions yield a non-linear boundary condition with an effective surface charge due to adsorption of ions from the bulk onto the interface. The calculation is done using the loop-expansion technique, where the zero-loop (mean field) corresponds of the non-linear Poisson-Boltzmann equation. The surface tension is obtained analytically to one-loop order, where the mean-field contribution is a modification of the Poisson-Boltzmann surface tension, and the one-loop contribution gives a generalization of the Onsager-Samaras result. Our theory fits well a wide range of different acids and salts, and is in accord with the reverse Hofmeister series for acids.

  20. A novel optimal sensitivity design scheme for yarn tension sensor using surface acoustic wave device.

    Science.gov (United States)

    Lei, Bingbing; Lu, Wenke; Zhu, Changchun; Liu, Qinghong; Zhang, Haoxin

    2014-08-01

    In this paper, we propose a novel optimal sensitivity design scheme for the yarn tension sensor using surface acoustic wave (SAW) device. In order to obtain the best sensitivity, the regression model between the size of the SAW yarn tension sensor substrate and the sensitivity of the SAW yarn tension sensor was established using the least square method. The model was validated too. Through analyzing the correspondence between the regression function monotonicity and its partial derivative sign, the effect of the SAW yarn tension sensor substrate size on the sensitivity of the SAW yarn tension sensor was investigated. Based on the regression model, a linear programming model was established to gain the optimal sensitivity of the SAW yarn tension sensor. The linear programming result shows that the maximum sensitivity will be achieved when the SAW yarn tension sensor substrate length is equal to 15 mm and its width is equal to 3mm within a fixed interval of the substrate size. An experiment of SAW yarn tension sensor about 15 mm long and 3mm wide was presented. Experimental results show that the maximum sensitivity 1982.39 Hz/g was accomplished, which confirms that the optimal sensitivity design scheme is useful and effective. Copyright © 2014. Published by Elsevier B.V.

  1. Texture Gradient Effectiveness in the Perception of Surface Slant

    Science.gov (United States)

    Rosinski, Richard R.; Levine, Nancy Parker

    1976-01-01

    To assess the development of monocular slant perception as well as the relative effectiveness of different sources of information, 90 children in first, third, and fifth grades and 30 college adults were asked to make judgments of surface slant on the basis of monocular texture gradient information. (Author/JH)

  2. Surface Tension of Acid Solutions: Fluctuations beyond the Nonlinear Poisson-Boltzmann Theory.

    Science.gov (United States)

    Markovich, Tomer; Andelman, David; Podgornik, Rudi

    2017-01-10

    We extend our previous study of surface tension of ionic solutions and apply it to acids (and salts) with strong ion-surface interactions, as described by a single adhesivity parameter for the ionic species interacting with the interface. We derive the appropriate nonlinear boundary condition with an effective surface charge due to the adsorption of ions from the bulk onto the interface. The calculation is done using the loop-expansion technique, where the zero loop (mean field) corresponds of the full nonlinear Poisson-Boltzmann equation. The surface tension is obtained analytically to one-loop order, where the mean-field contribution is a modification of the Poisson-Boltzmann surface tension and the one-loop contribution gives a generalization of the Onsager-Samaras result. Adhesivity significantly affects both contributions to the surface tension, as can be seen from the dependence of surface tension on salt concentration for strongly absorbing ions. Comparison with available experimental data on a wide range of different acids and salts allows the fitting of the adhesivity parameter. In addition, it identifies the regime(s) where the hypotheses on which the theory is based are outside their range of validity.

  3. Surface tension method for determining binding constants for cyclodextrin inclusion complexes of ionic surfactants

    Energy Technology Data Exchange (ETDEWEB)

    Dharmawardana, U.R.; Christian, S.D.; Tucker, E.E.; Taylor, R.W.; Scamehorn, J.F. (Univ. of Oklahoma, Norman, OK (United States))

    1993-09-01

    A new method has been developed for determining binding constants of complexes of cyclodextrins with surface-active compounds, including water-soluble ionic surfactants. The technique requires measuring the change in surface tension caused by addition of a cyclodextrin (CD) to aqueous solutions of the surfactant; the experimental results lead directly to inferred values of the thermodynamic activity of the surfactant. Surface tension results are reported for three different surfactants sodium dodecyl sulfate (SDS), cetylpyridinium chloride (CPC), and cetyltrimethylammonium bromide (CTAB) in the presence and in the absence of added [beta]-CD. Data for CPC have been obtained at surfactant concentrations below and above the critical micelle concentration. Correlations between surface tension and surfactant activity are expressed by the Szyszkowski equation, which subsumes the Langmuir adsorption model and the Gibbs equation. It is observed that the surface tension increases monotonically as [beta]-cyclodextrin is added to ionic surfactant solutions. At concentrations of CD well in excess of the surfactant concentration, the surface tension approaches that of pure water, indicating that neither the surfactant-CD complexes nor CD itself are surface active. Binding constants are inferred from a model that incorporates the parameters of the Szyszkowski equation and mass action constants relating to the formation of micelles from monomers of the surfactant and the counterion. Evidence is given that two molecules of CD can complex the C-16 hydrocarbon chain of the cetyl surfactants. 30 refs., 5 figs., 1 tab.

  4. Experimental evaluation of apparent tissue surface tension based on the exact solution of the Laplace equation

    Science.gov (United States)

    Norotte, C.; Marga, F.; Neagu, A.; Kosztin, I.; Forgacs, G.

    2008-02-01

    The notion of apparent tissue surface tension offered a systematic way to interpret certain morphogenetic processes in early development. It also allowed deducing quantitative information on cellular and molecular parameters that is otherwise difficult to obtain. To accurately determine such tensions we combined novel experiments with the exact solution of the Laplace equation for the profile of a liquid drop under the employed experimental conditions and used the exact solution to evaluate data collected on tissues. Our results confirm that tissues composed of adhesive and motile cells indeed can be characterized in terms of well-defined apparent surface tension. Our experimental technique presents a way to measure liquid interfacial tensions under conditions when known methods fail.

  5. On the measurement of surface tension in binders used for moulding sands

    Directory of Open Access Journals (Sweden)

    B. Hutera

    2008-07-01

    Full Text Available The surface tension of foundry binders is a very important parameter affecting the properties of a sand-binder system. Combined with other parameters, its value determines an outcome of the process of moulding sand preparation and the mechanical properties of the ready moulding composition. The problem of how to measure the surface tension of binders used in preparation of moulding sands is discussed only occasionally. Indirectly, the surface tension is characterised by the value of a contact angle, but it never means that these two parameters can be considered identical. Numerous methods are available and used at present to measure the surface tension, among others, the capillary rise method, the spinning drop method, the sessile drop method, the pendant drop method, the method of pulled out ring (or plate, or frame. There is also a rich variety of devices offered with different measuring methods. The devices are modern and represent a high level of the technical skill and art. Unfortunately, also their price is high. It is, however, possible to obtain the reliable results of the surface tension measurement using relatively simple methods, viz. the stalagmometric method and the capillary rise method. What is necessary are proper conditions of the measurement, directly related with the specific properties of binders. The present paper gives examples of the results obtained during measurement of the surface tension of some selected binders. Attention was drawn to the methods of taking measurements, and the obtained results were discussed and analysed. The possibilities of detemining the surface tension of the examined binders from the results of the contact angle measurements using the “sessile drop” and “pendant drop” methods were outlined.

  6. Effect of Dynamic Surface Tension on Droplet Formation of Surfactant Solution Injected from a Capillary Tube

    OpenAIRE

    山本, 剛宏; 加藤, 有樹; 山下, 敦史; Takehiro, YAMAMOTO; Yuki, Kato; Atsushi, Yamashita; 阪大院工; Osaka University

    2008-01-01

    Effects of dynamic surface tension on the droplet formation of surfactant solutions were studied. Aqueous solutions of CTAB at several surfactant concentrations were used as test fluids. A droplet formed when a surfactant solution was injected from a capillary tube was investigated and the relation between the droplet diameter and the injection velocity was measured. The diameter increased with increasing the velocity at relatively low velocities because the dynamic tension also increased. Ho...

  7. Directional motion of evaporating droplets on gradient surfaces

    Science.gov (United States)

    Yao, Shuhuai; Xu, Li; Li, Zhigang

    2012-11-01

    Droplet evaporation on surfaces has various applications in drying problems such as ink-jet printing, pesticide spraying, chemical or biological detection, and DNA microarray spotting technology. Controlling evaporating droplets via substrate morphology and/or wetting properties allows for efficient deposition of sample molecules in these applications. In this work, evaporation of sessile water droplets on surfaces with wettability gradients was studied. The wettability gradient was generated by fabricating non-uniformly distributed cylindrical micropillars on silicon surfaces. During the evaporation, it was found, along the wettability gradient, that the contact line on one side was strongly pinned, while the contact line on the other side depinned and gradually receded, making the center of mass of the droplet move either in or against the direction the wettability gradient, depending on the configuration of the micropillars. The theoretical criterion predicting the moving direction was derived based on the excess free energy and the energy barrier during the evaporation. The theoretical predications agreed well with the experimental observations. The results provide a parametric design basis to control the contact line dynamics and directional transport of evaporating droplets. This work was supported by the Research Grants Council of Hong Kong under General Research Fund (Grant No. 621110).

  8. Surface Tensions of Ionic Liquids: Non-Regular Trend Along the Number of Cyano Groups

    Science.gov (United States)

    Almeida, Hugo F. D.; Carvalho, Pedro J.; Kurnia, Kiki A.; Lopes-da-Silva, José A.; Coutinho, João A. P.; Freire, Mara G.

    2016-01-01

    Ionic liquids (ILs) with cyano-functionalized anions are a set of fluids that are still poorly characterized despite their remarkably low viscosities and potential applications. Aiming at providing a comprehensive study on the influence of the number of –CN groups through the surface tension and surface organization of ILs, the surface tensions of imidazolium-based ILs with cyano-functionalized anions were determined at atmospheric pressure and in the (298.15 to 343.15) K temperature range. The ILs investigated are based on 1-alkyl-3-methylimidazolium cations (alkyl = ethyl, butyl and hexyl) combined with the [SCN]-, [N(CN)2]−, [C(CN)3]− and [B(CN)4]-anions. Although the well-known trend regarding the surface tension decrease with the increase of the size of the aliphatic moiety at the cation was observed, the order obtained for the anions is more intricate. For a common cation and at a given temperature, the surface tension decreases according to: [N(CN)2]- > [SCN]- > [C(CN)3]- > [B(CN)4]-. Therefore, the surface tension of this homologous series does not decrease with the increase of the number of –CN groups at the anion as has been previously shown by studies performed with a more limited matrix of ILs. A maximum in the surface tension and critical temperature was observed for [N(CN)2]-based ILs. Furthermore, a minimum in the surface entropy, indicative of a highly structured surface, was found for the same class of ILs. All these evidences seem to be a result of stronger hydrogen-bonding interactions occurring in [N(CN)2]-based ILs, when compared with the remaining CN-based counterparts, and as sustained by cation-anion interaction energies derived from the Conductor Like Screening Model for Real Solvents (COSMO-RS). PMID:27642224

  9. Surface tension of water and acid gases from Monte Carlo simulations.

    Science.gov (United States)

    Ghoufi, A; Goujon, F; Lachet, V; Malfreyt, P

    2008-04-21

    We report direct Monte Carlo (MC) simulations on the liquid-vapor interfaces of pure water, carbon dioxide, and hydrogen sulfide. In the case of water, the recent TIP4P/2005 potential model used with the MC method is shown to reproduce the experimental surface tension and to accurately describe the coexistence curves. The agreement with experiments is also excellent for CO(2) and H(2)S with standard nonpolarizable models. The surface tensions are calculated by using the mechanical and the thermodynamic definitions via profiles along the direction normal to the surface. We also discuss the different contributions to the surface tension due to the repulsion-dispersion and electrostatic interactions. The different profiles of these contributions are proposed in the case of water.

  10. Surface tension of expanded slag from steel manufacturing in electrical furnace

    Directory of Open Access Journals (Sweden)

    J. Łabaj

    2011-07-01

    Full Text Available In the article a research on the surface tension of slag was conducted from the process of obtaining steel in the electric furnace. Melting in the graphite melting crucible caused the slag to foam. The measurement of the surface tension is being conducted with method of rejection. They make the measurement of maximum power needed for the liquid to reject the working element of the apparatus from the surface. The research was conducted in the temperature of 1 673 – 1 723 K. The results of the measurements allowed to determine the surface tension of slag, which in the analysed scope of the temperature is being changed from 454 to 345 mN•m-1.

  11. Dropwise Condensation of Low Surface Tension Fluids on iCVD Grafted Polymer Films

    Science.gov (United States)

    Khalil, Karim; Gleason, Karen; Varanasi, Kripa

    2016-11-01

    A large majority of the work devoted to surface engineering for promoting dropwise condensation heat transfer has focused on steam. Much less attention has been dedicated to the condensation of low surface tension fluids such as hydrocarbons, cryogens, and fluorinated refrigerants, which are used in several industrial applications, including LNG storage and organic Rankine cycles used for heat recovery from low temperature sources such as biomass combustion, industrial waste, or geothermal heat sources. Most hydrophobic modifiers used previously to promote dropwise condensation are silane-based monolayers that have been shown to rapidly degrade under industrial conditions. Here we investigate condensation behavior of a variety of low surface tension liquids on durable covalently-grafted polymer films deposited using initiated chemical vapor deposition (iCVD) on metals such as titanium. We observe a four to seven-fold improvement in the vapor-side heat transfer coefficient by promoting dropwise condensation of low surface tension fluids on these stable films.

  12. Ternary Free Energy Lattice Boltzmann Model with Tunable Surface Tensions and Contact Angles

    CERN Document Server

    Semprebon, Ciro; Kusumaatmaja, Halim

    2015-01-01

    We present a new ternary free energy lattice Boltzmann model. The distinguishing feature of our model is that we are able to analytically derive and independently vary all fluid-fluid surface tensions and the solid surface contact angles. We carry out a number of benchmark tests: (i) double emulsions and liquid lenses to validate the surface tensions, (ii) ternary fluids in contact with a square well to compare the contact angles against analytical predictions, and (iii) ternary phase separation to verify that the multicomponent fluid dynamics is accurately captured. Additionally we also describe how the model here presented here can be extended to include an arbitrary number of fluid components.

  13. Effect of concentration and temperature on surface tension of sodium hyaluronate saline solutions.

    Science.gov (United States)

    Ribeiro, Walkiria; Mata, José Luis; Saramago, Benilde

    2007-06-19

    The effect of concentration and temperature on the surface tension of sodium hyaluronate (NaHA) saline solutions was investigated using the technique of the shape of pendant drops. The decay rate of the surface tension with the increase of NaHA concentration was well-described by the empirical Hua-Rosen equation. Adsorption at the air-liquid interface was estimated using the Gibbs equation. The temperature dependence of a dilute solution and a semidilute entangled solution was numerically fitted with a second-order polynomial equation. The surface behavior of the NaHA saline solutions was interpreted in terms of their known viscoelastic properties.

  14. Spreading of oil films on water in the surface tension regime

    Energy Technology Data Exchange (ETDEWEB)

    Camp, D.W.

    1985-01-01

    Surface tension forces will cause an oil to spread over water if the tension of the oil film (the summed surface and interfacial tensions for bulk oil films, or the equilibrium spreading tension for monomolecular films) is less than the surface tension of water. For oil films spreading in a 40 cm long channel, measurements are made of leading edge position and lateral profiles of film thickness, velocity, and tension as a function of time. Measurements of the tension profiles, important for evaluating proposed theories, is made possible by the development of a new technique based on the Wilhelmy method. The oils studied were silicones, fatty acids and alcohols, and mixtures of surfactants in otherwise nonspreading oils. The single-component oils show an acceleration zone connecting a slow-moving inner region with a fast-moving leading monolayer. The dependence of film tension on film thickness for spreading single-component oils often differs from that at equilibrium. The mixtures show a bulk oil film configuration which extends to the leading edge and have velocity profiles which increase smoothly. The theoretical framework, similarity transformation, and asymptotic solutions of Foda and Cox for single-component oils were shown to be valid. An analysis of spreading surfactant-oil mixtures is developed which allows them to be treated under this framework. An easily-used semi-empirical model is proposed which allows them to be treated under this framework. An easily-used semi-empirical model is proposed which allows accurate prediction of detailed spreading behavior for any spreading oil.

  15. Modeling the surface tension of complex, reactive organic-inorganic mixtures

    Science.gov (United States)

    Schwier, A. N.; Viglione, G. A.; Li, Z.; McNeill, V. Faye

    2013-11-01

    Atmospheric aerosols can contain thousands of organic compounds which impact aerosol surface tension, affecting aerosol properties such as heterogeneous reactivity, ice nucleation, and cloud droplet formation. We present new experimental data for the surface tension of complex, reactive organic-inorganic aqueous mixtures mimicking tropospheric aerosols. Each solution contained 2-6 organic compounds, including methylglyoxal, glyoxal, formaldehyde, acetaldehyde, oxalic acid, succinic acid, leucine, alanine, glycine, and serine, with and without ammonium sulfate. We test two semi-empirical surface tension models and find that most reactive, complex, aqueous organic mixtures which do not contain salt are well described by a weighted Szyszkowski-Langmuir (S-L) model which was first presented by Henning et al. (2005). Two approaches for modeling the effects of salt were tested: (1) the Tuckermann approach (an extension of the Henning model with an additional explicit salt term), and (2) a new implicit method proposed here which employs experimental surface tension data obtained for each organic species in the presence of salt used with the Henning model. We recommend the use of method (2) for surface tension modeling of aerosol systems because the Henning model (using data obtained from organic-inorganic systems) and Tuckermann approach provide similar modeling results and goodness-of-fit (χ2) values, yet the Henning model is a simpler and more physical approach to modeling the effects of salt, requiring less empirically determined parameters.

  16. Modeling the surface tension of complex, reactive organic-inorganic mixtures

    Directory of Open Access Journals (Sweden)

    A. N. Schwier

    2013-01-01

    Full Text Available Atmospheric aerosols can contain thousands of organic compounds which impact aerosol surface tension, affecting aerosol properties such as cloud condensation nuclei (CCN ability. We present new experimental data for the surface tension of complex, reactive organic-inorganic aqueous mixtures mimicking tropospheric aerosols. Each solution contained 2–6 organic compounds, including methylglyoxal, glyoxal, formaldehyde, acetaldehyde, oxalic acid, succinic acid, leucine, alanine, glycine, and serine, with and without ammonium sulfate. We test two surface tension models and find that most reactive, complex, aqueous organic mixtures which do not contain salt are well-described by a weighted Szyszkowski–Langmuir (S–L model which was first presented by Henning et al. (2005. Two approaches for modeling the effects of salt were tested: (1 the Tuckermann approach (an extension of the Henning model with an additional explicit salt term, and (2 a new implicit method proposed here which employs experimental surface tension data obtained for each organic species in the presence of salt used with the Henning model. We recommend the use of method (2 for surface tension modeling because the Henning model (using data obtained from organic-inorganic systems and Tuckermann approach provide similar modeling fits and goodness of fit (χ2 values, yet the Henning model is a simpler and more physical approach to modeling the effects of salt, requiring less empirically determined parameters.

  17. Line tension and its influence on droplets and particles at surfaces

    Science.gov (United States)

    Law, Bruce M.; McBride, Sean P.; Wang, Jiang Yong; Wi, Haeng Sub; Paneru, Govind; Betelu, Santigo; Ushijima, Baku; Takata, Youichi; Flanders, Bret; Bresme, Fernando; Matsubara, Hiroki; Takiue, Takanori; Aratono, Makoto

    2017-02-01

    In this review we examine the influence of the line tension τ on droplets and particles at surfaces. The line tension influences the nucleation behavior and contact angle of liquid droplets at both liquid and solid surfaces and alters the attachment energetics of solid particles to liquid surfaces. Many factors, occurring over a wide range of length scales, contribute to the line tension. On atomic scales, atomic rearrangements and reorientations of submolecular components give rise to an atomic line tension contribution τatom (∼1 nN), which depends on the similarity/dissimilarity of the droplet/particle surface composition compared with the surface upon which it resides. At nanometer length scales, an integration over the van der Waals interfacial potential gives rise to a mesoscale contribution |τvdW| ∼ 1-100 pN while, at millimeter length scales, the gravitational potential provides a gravitational contribution τgrav ∼ +1-10 μN. τgrav is always positive, whereas, τvdW can have either sign. Near wetting, for very small contact angle droplets, a negative line tension may give rise to a contact line instability. We examine these and other issues in this review.

  18. Surface-tension phenomena in organismal biology: an introduction to the symposium.

    Science.gov (United States)

    Bourouiba, Lydia; Hu, David L; Levy, Rachel

    2014-12-01

    Flows driven by surface tension are both ubiquitous and diverse, involving the drinking of birds and bees, the flow of xylem in plants, the impact of raindrops on animals, respiration in humans, and the transmission of diseases in plants and animals, including humans. The fundamental physical principles underlying such flows provide a unifying framework to interpret the adaptations of the microorganisms, animals, and plants that rely upon them. The symposium on "Surface-Tension Phenomena in Organismal Biology" assembled an interdisciplinary group of researchers to address a large spectrum of topics, all articulated around the role of surface tension in shaping biology, health, and ecology. The contributions to the symposium and the papers in this issue are meant to be a starting point for novices to familiarize themselves with the fundamentals of flows driven by surface tension; to understand how they can play a governing role in many settings in organismal biology; and how such understanding of nature's use of surface tension can, in turn, inspire humans to innovate.

  19. Achieving tunable surface tension in the pseudopotential lattice Boltzmann modeling of interface dynamics

    CERN Document Server

    Li, Q

    2013-01-01

    In this paper, we aim to address an important issue about the pseudopotential lattice Boltzmann (LB) model, which has attracted much attention as a mesoscopic model for simulating interfacial dynamics of complex fluids, but suffers from the problem that the surface tension cannot be tuned independently of the density ratio. In the literature, a multi-range potential was devised to adjust the surface tension [Sbragaglia et al., Phys. Rev. E, 2007, 75, 026702; Sbragaglia et al. Soft Matter, 2012, 8, 10773]. However, this approach was found to be unable to keep the density ratio unchanged when the surface tension is adjusted. An alternative approach is therefore proposed in the present work. The basic strategy is to add a new source term to the LB equation so as to tune the surface tension of the pseudopotential LB model. The proposed approach can guarantee that the adjustment of the surface tension does not affect the mechanical stability condition of the pseudopotential LB model, and thus provides a separate c...

  20. Modeling phase distribution of water-soluble organics in aqueous solutions using surface tension data

    Science.gov (United States)

    Cline, B.; Hiatt, J.; Aumann, E.; Cabrera, J.; Tabazadeh, A.

    2006-12-01

    A good fraction (greater than 30 percent) of submicron particle mass in the atmosphere is often composed of water-soluble organic carbon. Identifiable, water-miscible organics, such as, known sugars, small alcohols, small diacids, etc. comprise only a small fraction of the water-soluble mass (about 1-2 percent). Most of the water-soluble mass is often composed of unidentifiable, humic-like materials, which are commonly refereed to as HULIS. Humic substances are known to form colloids in aqueous solutions at very low aqueous concentrations. Thus, it is likely for HULIS to also be colloid-forming in aqueous solutions. Here, we present surface tension measurements of water-miscible and colloid-forming organics, using methanol and sodium laurate as analogs, respectively. By relating the change in surface tension to chemical potential of the solution, we determine a relationship between surface tension and the surface excess of solute; that is, the number of molecules of solute adsorbed at the surface. Assuming surface acts as a monolayer, we model the adsorption with a Langmuir isotherm to extract the surface excess as a function of solute mole fraction. This relationship allows us to calculate the solute's distribution between bulk and surface phases for methanol, and in bulk, surface and colloid phases for sodium laurate. A colloid of sodium laurate contains approximately 100 laurate anions in a spherical cluster. We present adsorption constants for methanol and sodium laurate (derived from our surface tension data), critical micelle concentration for sodium laurate (derived from our surface tension data), and all the other thermocehmical constants (obtained from the literature) required to constrain a model for determining phase partitioning of organics in aqueous solutions.

  1. Ternary solution of sodium chloride, succinic acid and water; surface tension and its influence on cloud droplet activation

    Directory of Open Access Journals (Sweden)

    J. Vanhanen

    2008-08-01

    Full Text Available Surface tension of ternary solution of sodium chloride, succinic acid and water was measured as a function of both composition and temperature by using the capillary rise technique. Both sodium chloride and succinic acid are found in atmospheric aerosols, the former being main constituent of marine aerosol. Succinic acid was found to decrease the surface tension of water already at very low concentrations. Sodium chloride increased the surface tension linearly as a function of the concentration. Surface tensions of both binary solutions agreed well with the previous measurements. Succinic acid was found to lower the surface tension even if sodium chloride is present, indicating that succinic acid, as a surface active compound, tends to concentrate to the surface. An equation based on thermodynamical relations was fitted to the data and extrapolated to the whole concentration range by using estimated surface tensions for pure compounds. As a result, we obtained an estimate of surface tensions beyond solubility limits in addition to a fit to the experimental data. The parameterization can safely be used at temperatures from 10 to 30°C. These kinds of parameterizations are important for example in atmospheric nucleation models. To investigate the influence of surface tension on cloud droplet activation, the surface tension parameterization was included in an adiabatic air parcel model. Usually in cloud models the surface tension of pure water is used. Simulations were done for characteristic marine aerosol size distributions consisting of the considered ternary mixture. We found that by using the surface tension of pure water, the amount of activated particles is underestimated up to 8% if particles contain succinic acid and overestimated it up to 8% if particles contain only sodium chloride. The surface tension effect was found to increase with increasing updraft velocity.

  2. Surface tension in the cold and dense chiral transition and astrophysical applications

    CERN Document Server

    Palhares, L F

    2011-01-01

    The surface tension of cold and dense QCD phase transitions has appeared recently as a key ingredient in different astrophysical scenarios, ranging from core-colapse supernovae explosions to compact star structure. If the surface tension is low enough, observable consequences are possible. Its value is however not known from first-principle methods in QCD, calling for effective approaches. Working within the framework of homogeneous nucleation by Langer, we discuss the steps that are needed to obtain the nucleation parameters from a given effective potential. As a model for deriving the effective potential for the chiral transition, we adopt the linear sigma model with constituent quarks at very low temperatures, which provides an effective description for the thermodynamics of the strong interaction in cold and dense matter, and predict a surface tension of Sigma ~ 5--15 MeV/fm^2, well below previous estimates. Including temperature effects and vacuum logarithmic corrections, we find a clear competition betw...

  3. Surface tension and specific heat of liquid Ni70.2Si29.8 alloy

    Institute of Scientific and Technical Information of China (English)

    WANG Haipeng; WEI Bingbo

    2005-01-01

    The surface tension and specific heat of stable and metastable liquid Ni70.2Si29.8 eutectic alloy were measured by electromagnetic levitation oscillating drop method and drop calorimetry. The surface tension depends on temperature linearly within the experimental undercooling regime of 0-182 K (0.12 TE). Its value is 1.693 N·m-1 at the eutectic temperature of 1488 K, and the temperature coefficient is -4.23×10-4 N·m-1·K-1. For the specific heat measurement, the maximum undercooling is up to 253 K (0.17 TE). The specific heat is determined as a polynomial function of temperature in the experimental temperature regime. On the basis of the measured data of surface tension and specific heat, the temperature-dependent density, excess volume and sound speed of liquid Ni70.2Si29.8 alloy are predicted theoretically.

  4. Surface tensions in horizon thermodynamics of Anti-de Sitter and de Sitter spacetimes

    CERN Document Server

    Chen, Deyou; Tao, Jun

    2016-01-01

    Adopting the surface tensions, we review the horizon thermodynamics of a Reissner-Nordstrom Anti-de Sitter black hole and a pure de Sitter spacetime. The modified first laws of thermodynamics, which obeys the corresponding Smarr relations, are gotten. For the black hole, the law is written as $\\delta E = T \\delta S - \\sigma\\delta A$ when the cosmological constant is fixed, where $E$ and $\\sigma$ are the Misner-Sharp mass and the surface tension, respectively. Treating the cosmological constant as an variable associated to the pressure, we rewrite the law as $\\delta E_0 = T \\delta S - \\sigma_{eff}\\delta A +V\\delta P$. The effective surface tension and pressure are obtained. The form of the modified first law of the de Sitter spacetime is different from that of the black hole.

  5. A new curvature technique calculation for surface tension contribution in PLIC-VOF method

    Science.gov (United States)

    Martinez, J.-M.; Chesneau, X.; Zeghmati, B.

    2006-01-01

    The volume of fluid (VOF) methods have been used for numerous numerical simulations. Among these techniques used to define the moving interface, the piecewise linear interface reconstruction (PLIC-VOF) is one of the most accurate. A study of the superficial tension impact on two-phase flow with free surface is presented. A new method based on direct staggered grid is developped to include surface tension in PLIC-VOF. The new numerical curvature calculation method doesn't need smoothed colour function and leads to less “spurious current”. This technique is applied to the calculus of surface tension force in the case of the rise of air bubble in viscous liquid and the fall of liquid drop in the same liquid on free surface. Droplets, thin layer and capillarity waves are observed after the free surface rupture for different Bond number. The influence of surface tension calculus is then obvioused and when the drop hit the free surface, wavelets propagate toward the virtual boundaries imposed.

  6. Density, Molar Volume, and Surface Tension of Liquid Al-Ti

    Science.gov (United States)

    Wessing, Johanna Jeanette; Brillo, Jürgen

    2017-02-01

    Al-Ti-based alloys are of enormous technical relevance due to their specific properties. For studies in atomic dynamics, surface physics and industrial processing the precise knowledge of the thermophysical properties of the liquid phase is crucial. In the present work, we systematically measure mass density, ρ (g cm-3), and the surface tension, γ (N m-1), as functions of temperature, T, and compositions of binary Al-Ti melts. Electromagnetic levitation in combination with the optical dilatometry method is used for density measurements and the oscillating drop method for surface tension measurements. It is found that, for all compositions, density and surface tension increase linearly upon decreasing temperature in the liquid phase. Within the Al-Ti system, we find the largest values for pure titanium and the smallest for pure aluminum, which amount to ρ(L,Ti) = 4.12 ± 0.04 g cm-3 and γ(L,Ti) = 1.56 ± 0.02 N m-1; and ρ(L,Al) = 2.09 ± 0.01 g cm-3 and γ(L,Al) = 0.87 ± 0.06 N m-1, respectively. The data are analyzed concerning the temperature coefficients, ρ T and γ T, excess molar volume, V E, excess surface tension, γ E, and surface segregation of the surface active component, Al. The results are compared with thermodynamic models. Generally, it is found that Al-Ti is a highly nonideal system.

  7. Accuracy of surface tension measurement from drop shapes: the role of image analysis.

    Science.gov (United States)

    Kalantarian, Ali; Saad, Sameh M I; Neumann, A Wilhelm

    2013-11-01

    Axisymmetric Drop Shape Analysis (ADSA) has been extensively used for surface tension measurement. In essence, ADSA works by matching a theoretical profile of the drop to the extracted experimental profile, taking surface tension as an adjustable parameter. Of the three main building blocks of ADSA, i.e. edge detection, the numerical integration of the Laplace equation for generating theoretical curves and the optimization procedure, only edge detection (that extracts the drop profile line from the drop image) needs extensive study. For the purpose of this article, the numerical integration of the Laplace equation for generating theoretical curves and the optimization procedure will only require a minor effort. It is the aim of this paper to investigate how far the surface tension accuracy of drop shape techniques can be pushed by fine tuning and optimizing edge detection strategies for a given drop image. Two different aspects of edge detection are pursued here: sub-pixel resolution and pixel resolution. The effect of two sub-pixel resolution strategies, i.e. spline and sigmoid, on the accuracy of surface tension measurement is investigated. It is found that the number of pixel points in the fitting procedure of the sub-pixel resolution techniques is crucial, and its value should be determined based on the contrast of the image, i.e. the gray level difference between the drop and the background. On the pixel resolution side, two suitable and reliable edge detectors, i.e. Canny and SUSAN, are explored, and the effect of user-specified parameters of the edge detector on the accuracy of surface tension measurement is scrutinized. Based on the contrast of the image, an optimum value of the user-specified parameter of the edge detector, SUSAN, is suggested. Overall, an accuracy of 0.01mJ/m(2) is achievable for the surface tension determination by careful fine tuning of edge detection algorithms.

  8. Quantitative Structure-Property Relationship on Prediction of Surface Tension of Nonionic Surfactants

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A quantitative structure-property relationship (QSPR) study has been made for the prediction of the surface tension of nonionic surfactants in aqueous solution.The regressed model includes a topological descriptor,the Kier & Hall index of zero order (KH0) of the hydrophobic segment of surfactant and a quantum chemical one,the heat of formation () of surfactant molecules.The established general QSPR between the surface tension and the descriptors produces a correlation coefficient of multiple determination,=0.9877,for 30 studied nonionic surfactants.

  9. Surface tension measurements of aqueous ammonium chloride (NH4Cl) in air

    Science.gov (United States)

    Lowry, S. A.; Mccay, M. H.; Mccay, T. D.; Gray, P. A.

    1989-01-01

    Aqueous NH4Cl's solidification is often used to model metal alloy solidification processes. The present determinations of the magnitude of the variation of aqueous NH4Cl's surface tension as a function of both temperature and solutal concentration were conducted at 3, 24, and 40 C over the 72-100 wt pct water solutal range. In general, the surface tension increases 0.31 dyn/cm per percent decrease in wt pct of water, and decreases 0.13 dyn/cm for each increase in deg C. Attention is given to the experimental apparatus employed.

  10. Cloud droplet activation and surface tension of mixtures of slightly soluble organics and inorganic salt

    Directory of Open Access Journals (Sweden)

    S. Henning

    2004-11-01

    Full Text Available Critical supersaturations for internally mixed particles of adipic acid, succinic acid and sodium chloride were determined experimentally for dry particles sizes in the range 40–130 nm. Surface tensions of aqueous solutions of the dicarboxylic acids and sodium chloride corresponding to concentrations at activation were measured and parameterized as a function of carbon content. The activation of solid particles as well as solution droplets were studied and particle phase was found to be important for the critical supersaturation. Experimental data were modelled using Köhler theory modified to account for limited solubility and surface tension lowering.

  11. Diffusion and surface alloying of gradient nanostructured metals

    Directory of Open Access Journals (Sweden)

    Zhenbo Wang

    2017-03-01

    Full Text Available Gradient nanostructures (GNSs have been optimized in recent years for desired performance. The diffusion behavior in GNS metals is crucial for understanding the diffusion mechanism and relative characteristics of different interfaces that provide fundamental understanding for advancing the traditional surface alloying processes. In this paper, atomic diffusion, reactive diffusion, and surface alloying processes are reviewed for various metals with a preformed GNS surface layer. We emphasize the promoted atomic diffusion and reactive diffusion in the GNS surface layer that are related to a higher interfacial energy state with respect to those in relaxed coarse-grained samples. Accordingly, different surface alloying processes, such as nitriding and chromizing, have been modified significantly, and some diffusion-related properties have been enhanced. Finally, the perspectives on current research in this field are discussed.

  12. Quantitative differences in tissue surface tension influence zebrafish germ layer positioning.

    Science.gov (United States)

    Schötz, Eva-Maria; Burdine, Rebecca D; Jülicher, Frank; Steinberg, Malcolm S; Heisenberg, Carl-Philipp; Foty, Ramsey A

    2008-02-01

    This study provides direct functional evidence that differential adhesion, measurable as quantitative differences in tissue surface tension, influences spatial positioning between zebrafish germ layer tissues. We show that embryonic ectodermal and mesendodermal tissues generated by mRNA-overexpression behave on long-time scales like immiscible fluids. When mixed in hanging drop culture, their cells segregate into discrete phases with ectoderm adopting an internal position relative to the mesendoderm. The position adopted directly correlates with differences in tissue surface tension. We also show that germ layer tissues from untreated embryos, when extirpated and placed in culture, adopt a configuration similar to those of their mRNA-overexpressing counterparts. Down-regulating E-cadherin expression in the ectoderm leads to reduced surface tension and results in phase reversal with E-cadherin-depleted ectoderm cells now adopting an external position relative to the mesendoderm. These results show that in vitro cell sorting of zebrafish mesendoderm and ectoderm tissues is specified by tissue interfacial tensions. We perform a mathematical analysis indicating that tissue interfacial tension between actively motile cells contributes to the spatial organization and dynamics of these zebrafish germ layers in vivo.

  13. Adhesion of bubbles and drops to solid surfaces, and anisotropic surface tensions studied by capillary meniscus dynamometry

    NARCIS (Netherlands)

    Danov, Krassimir D.; Stanimirova, Rumyana D.; Kralchevsky, Peter A.; Marinova, Krastanka G.; Stoyanov, Simeon D.; Blijdenstein, Theodorus B.J.; Cox, Andrew R.; Pelan, Eddie G.

    2016-01-01

    Here, we review the principle and applications of two recently developed methods: the capillary meniscus dynamometry (CMD) for measuring the surface tension of bubbles/drops, and the capillary bridge dynamometry (CBD) for quantifying the bubble/drop adhesion to solid surfaces. Both methods are

  14. Fabrication of heterogeneous microlenses using self-surface tension

    Science.gov (United States)

    Chiang, Cheng-Han; Su, Guo-Dung J.

    2014-09-01

    Solar optical modeling tools are valuable for modeling and predicting the performance of solar technology systems. Four optical modeling tools were evaluated using the National Solar Thermal Test Facility heliostat field combined with flat plate receiver geometry as a benchmark. The four optical modeling tools evaluated were DELSOL, HELIOS, SolTrace, and Tonatiuh. All are available for free from their respective developers. DELSOL and HELIOS both use a convolution of the sunshape and optical errors for rapid calculation of the incident irradiance profiles on the receiver surfaces. SolTrace and Tonatiuh use ray-tracing methods to intersect the reflected solar rays with the receiver surfaces and construct irradiance profiles. We found the ray-tracing tools, although slower in computation speed, to be more flexible for modeling complex receiver geometries, whereas DELSOL and HELIOS were limited to standard receiver geometries such as flat plate, cylinder, and cavity receivers. We also list the strengths and deficiencies of the tools to show tool preference depending on the modeling and design needs. We provide an example of using SolTrace for modeling nonconventional receiver geometries. The goal is to transfer the irradiance profiles on the receiver surfaces calculated in an optical code to a computational fluid dynamics code such as ANSYS Fluent. This approach eliminates the need for using discrete ordinance or discrete radiation transfer models, which are computationally intensive, within the CFD code. The irradiance profiles on the receiver surfaces then allows for thermal and fluid analysis on the receiver.

  15. Effect of Undulations on Surface Tension in Simulated Bilayers

    NARCIS (Netherlands)

    Marrink, S.J.; Mark, A.E.

    2001-01-01

    To understand the effect of the finite size of simulation cells on the equilibrium properties of bilayers, an extensive series of glycerolmonoolein bilayer molecular dynamics simulations in which the surface area and system size were systematically changed have been conducted. Systems ranging from

  16. Surface Slip Gradients and Fault Connectivity at Depth

    Science.gov (United States)

    Oglesby, D. D.

    2012-12-01

    Observational and numerical evidence has implied that it is difficult for earthquake rupture to jump stepovers with widths significantly larger than 4 km [e.g., Harris et al., 1991; Harris and Day, 1999; Wesnousky, 2006]. It has also been shown observationally that if surface slip tapers to zero over a small along-strike distance on the primary fault segment at a stepover, an earthquake has a significantly increased likelihood of jumping the stepover and propagating to a secondary fault segment [Elliott et al., 2009]. This latter result has been attributed to a high slip gradient on the primary segment generating a strong dynamic stress concentration on the second segment, which can facilitate rupture renucleation [Oglesby, 2008]. Recent 3D dynamic earthquake simulations, however, provide an alternative interpretation for this effect: an earthquake on a fault that is disconnected at the surface but is connected (i.e., is a throughgoing structure) at depth also will tend to produce a higher surface slip gradient at the edges of the segments than will a system that is fully disconnected, at least for relatively long segments that are connected at relatively shallow depth. This result raises the possibility that many of the rupture "jumps" that we see at fault stepovers on the surface may in fact reflect through-going ruptures on a continuous subsurface fault. These results may have implications for the pervasiveness of fault connectivity at depth, the likelihood of throughgoing rupture at surface stepovers, ground motion estimates, and seismic hazard.

  17. SURFACE TENSION OF MOLTEN IF STEEL CONTAINING Ti AND ITS INTERFACIAL PROPERTIES WITH SOLID ALUMINA

    Institute of Scientific and Technical Information of China (English)

    L.C. Zhong; M. Zeze; K. Mukai

    2004-01-01

    Surface tension of molten IF steel containing Ti and contact angle between the liquid steel and solid alumina were measured with sessile droplet method under Ar gas atmosphere at 1500, 1575 and 1600℃. The results show that titanium decreases the surface tension of the molten IF steel and the contact angle. The interfacial tension between the molten IF steel containing Ti and solid alumina decreases with increase in titanium content. The work of adhesion between molten IF steel containing Ti and solid alumina decreases slightly at 1550℃, but increases at 1600℃ with increasing titanium content. It can be deduced that fine bubbles and fine alumina inclusions are easily entrapped in solidifying interface for IF steel containing Ti.

  18. Constrained sessile drop as a new configuration to measure low surface tension in lung surfactant systems.

    Science.gov (United States)

    Yu, Laura M Y; Lu, James J; Chan, Yawen W; Ng, Amy; Zhang, Ling; Hoorfar, Mina; Policova, Zdenka; Grundke, Karina; Neumann, A Wilhelm

    2004-08-01

    Existing methodology for surface tension measurements based on drop shapes suffers from the shortcoming that it is not capable to function at very low surface tension if the liquid dispersion is opaque, such as therapeutic lung surfactants at clinically relevant concentrations. The novel configuration proposed here removes the two big restrictions, i.e., the film leakage problem that is encountered with such methods as the pulsating bubble surfactometer as well as the pendant drop arrangement, and the problem of the opaqueness of the liquid, as in the original captive bubble arrangement. A sharp knife edge is the key design feature in the constrained sessile drop that avoids film leakage at low surface tension. The use of the constrained sessile drop configuration in conjunction with axisymmetric drop shape analysis to measure surface tension allows complete automation of the setup. Dynamic studies with lung surfactant can be performed readily by changing the volume of a sessile drop, and thus the surface area, by means of a motor-driven syringe. To illustrate the validity of using this configuration, experiments were performed using an exogenous lung surfactant preparation, bovine lipid extract surfactant (BLES) at 5.0 mg/ml. A comparison of results obtained for BLES at low concentration between the constrained sessile drop and captive bubble arrangement shows excellent agreement between the two approaches. When the surface area of the BLES film (0.5 mg/ml) was compressed by about the same amount in both systems, the minimum surface tensions attained were identical within the 95% confidence limits.

  19. Effect of temperature and concentration on the surface tension of chia seed mucilage

    Science.gov (United States)

    Fu, Yuting; Arye, Gilboa

    2017-04-01

    The production of mucilage by the seed coat during hydration is a common adaptation of many different plant species. The mucilage may play many ecological roles in adaptation and seed germination in diverse environments, especially in extreme desert conditions. The major compound of the seed mucilage is polysaccharides (e.g. pectins and hemicelluloses), which makes it highly hydrophilic. Consequently, it can hydrate quickly in the presence of water; forming a gel like coating surrounding the seed. However, the seed mucilage also reported to contain small amounts of protein and lipid which may exhibit surface activity at the water-air interface. As a result, decay in the surface tension of water can be occur and consequently a reduction in soil capillary pressure. This in turn may affect the water retention and transport during seed germination. The physical properties of the seeds mucilage have been studied mainly in conjunction with its rheological properties. To the best of our knowledge, its surface activity at the water-air interface has been reported mainly in the realms of food engineering, using a robust method of extraction. The main objective of this study was to quantify the effect of temperature and concentration on the surface tension of seed mucilage. The mucilage in this study was extracted from chia (Salvia hispanica L.) seeds, using distilled water (1:20 w/w) by shaking for 12 h at 4°C. The extracts were freeze dried after centrifuge (5000rpm for 20min). Fresh samples of different concentrations, ranging from 0.5 to 6 mg/ml, were prepared before each surface tension measurements. The equilibrium surface tension was measured by the Wilhelmy plate method using a tensiometer (DCAT 11, Data Physics) with temperature control unit. For a given mucilage concentration, surface tension measurements carried out at 5, 15, 25, 35, 45 °C. The quantitative and thermodynamic analysis of the results will be presented and discussed.

  20. Line Tension of Twist-Free Carbon Nanotube Lyotropic Liquid Crystal Microdroplets on Solid Surfaces.

    Science.gov (United States)

    Jamali, Vida; Biggers, Evan G; van der Schoot, Paul; Pasquali, Matteo

    2017-09-12

    Line tension, i.e., the force on a three-phase contact line, has been a subject of extensive research due to its impact on technological applications including nanolithography and nanofluidics. However, there is no consensus on the sign and magnitude of the line tension, mainly because it only affects the shape of small droplets, below the length scale dictated by the ratio of line tension to surface tension σ/τ. This ratio is related to the size of constitutive molecules in the system, which translates to a nanometer for conventional fluids. Here, we show that this ratio is orders of magnitude larger in lyotropic liquid crystal systems comprising micrometer-long colloidal particles. Such systems are known to form spindle-shaped elongated liquid crystal droplets in coexistence with the isotropic phase, with the droplets flattening when in contact with flat solid surfaces. We propose a method to characterize the line tension by fitting measured droplet shape to a macroscopic theoretical model that incorporates interfacial forces and elastic deformation of the nematic phase. By applying this method to hundreds of droplets of carbon nanotubes dissolved in chlorosulfonic acid, we find that σ/τ ∼ -0.84 ± 0.06 μm. This ratio is 2 orders of magnitude larger than what has been reported for conventional fluids, in agreement with theoretical scaling arguments.

  1. Heat Transfer in Bubble Columns with High Viscous and Low Surface Tension Media

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Wan Tae; Lim, Dae Ho; Kang, Yong [Chungnam National University, Daejeon (Korea, Republic of)

    2014-08-15

    Axial and overall heat transfer coefficients were investigated in a bubble column with relatively high viscous and low surface tension media. Effects of superficial gas velocity (0.02-0.1 m/s), liquid viscosity (0.1-3 Pa·s) and surface tension (66.1-72.9x10{sup -3} N/m) on the local and overall heat transfer coefficients were examined. The heat transfer field was composed of the immersed heater and the bubble column; a vertical heater was installed at the center of the column coaxially. The heat transfer coefficient was determined by measuring the temperature differences continuously between the heater surface and the column which was bubbling in a given operating condition, with the knowledge of heat supply to the heater. The local heat transfer coefficient increased with increasing superficial gas velocity but decreased with increasing axial distance from the gas distributor and liquid surface tension. The overall heat transfer coefficient increased with increasing superficial gas velocity but decreased with increasing liquid viscosity or surface tension. The overall heat transfer coefficient was well correlated in terms of operating variables such as superficial gas velocity, liquid surface tension and liquid viscosity with a correlation coefficient of 0.91, and in terms of dimensionless groups such as Nusselt, Reynolds, Prandtl and Weber numbers with a correlation of 0.92; h=2502U{sub G}{sup 0.236}{sub L}{sup -0.250}{sub L}{sup -}0{sup .028} Nu=3.25Re{sup 0.180}Pr{sup -0.067}We{sup 0.028}.

  2. Surface tension of heptane, decane, hexadecane, eicosane, and some of their binary mixtures

    DEFF Research Database (Denmark)

    Rolo, Lara I.; Caco, Ana I.; Queimada, Antonio;

    2002-01-01

    Surface tension measurements were performed by the Wilhelmy plate method. Measured systems included pure heptane, decane, hexadecane, eicosane, and some of their binary mixtures at temperatures from 293.15 K to 343.15 K with an average absolute deviation of 1.6%. The results were compared with a ...

  3. Evolution of melt-vapor surface tension in silicic volcanic systems: Experiments with hydrous melts

    Science.gov (United States)

    Mangan, M.; Sisson, T.

    2005-01-01

    We evaluate the melt-vapor surface tension (??) of natural, water-saturated dacite melt at 200 MPa, 950-1055??C, and 4.8-5.7 wt % H2O. We experimentally determine the critical supersaturation pressure for bubble nucleation as a function of dissolved water and then solve for ?? at those conditions using classical nucleation theory. The solutions obtained give dacite melt-vapor surface tensions that vary inversely with dissolved water from 0.042 (??0.003) J m-2 at 5.7 wt% H2O to 0.060 (??0.007) J m-2 at 5.2 wt% H2O to 0.073 (??0.003) J m-2 at 4.8 wt% H2O. Combining our dacite results with data from published hydrous haplogranite and high-silica rhyolite experiments reveals that melt-vapor surface tension also varies inversely with the concentration of mafic melt components (e.g., CaO, FeOtotal, MgO). We develop a thermodynamic context for these observations in which melt-vapor surface tension is represented by a balance of work terms controlled by melt structure. Overall, our results suggest that cooling, crystallization, and vapor exsolution cause systematic changes in ?? that should be considered in dynamic modeling of magmatic processes.

  4. The role of surface tension on the elastic decohesion of polymeric filaments

    DEFF Research Database (Denmark)

    Rasmussen, Henrik K.; Hassager, Ole

    2001-01-01

    We simulate the rapid extension of polymeric filaments between parallel plates with special attention to the role of surface tension in the symmetry breaking aximuthal instability that may occur near the end plates. The instability is viewed as a precursor to the eventual elastic decohesion of th...

  5. On surface tension of a bubble under presence of electrostatic force

    Directory of Open Access Journals (Sweden)

    Chen Rou-Xi

    2015-01-01

    Full Text Available The surface tension of a bubble is described by Young-Laplace equation, which becomes, however, invalid under the presence of electrostatic force, and a modified one is obtained, which can be widely applied for Bubbfil spinning process.

  6. Measurement and Modeling of Surface Tensions of Asymmetric Systems: Heptane, Eicosane, Docosane, Tetracosane and their Mixtures

    DEFF Research Database (Denmark)

    Queimada, Antonio; Silva, Filipa A.E; Caco, Ana I.;

    2003-01-01

    To extend the surface tension database for heavy or asymmetric n-alkane mixtures, measurements were performed using the Wilhelmy plate method. Measured systems included the binary mixtures heptane + eicosane, heptane + docosane and heptane + tetracosane and the ternary mixture heptane + eicosane...

  7. Characterization of the surface tension and solubility parameter of epoxy resin by using inverse gas chromatography.

    Science.gov (United States)

    Shi, Fenghui; Dai, Zhishuang; Zhang, Baoyan

    2010-07-01

    Inverse gas chromatography (IGC) was used to measure the surface tension and solubility parameter of E51 epoxy resin in this work. By using the Schultz method, decane, nonane, octane and heptane were chosen as the neutral probes to calculate the dispersive surface tensions (gamma(D)). Based on the Good-van Oss equation, the specific surface tension (gamma(SP)) of E51 epoxy resin was calculated with the acidic probe of dichloromethane and the basic probe of toluene. The results showed that the gamma(D) and gamma(SP) of the E51 resin decreased linearly with the increase of temperature. According to the Flory-Huggins parameters (chi) between the resin and a series of probes, the solubility parameters (delta) of E51 resin at different temperatures were estimated using the method developed by DiPaola-Baranyi and Guillet. It was found that the values of delta of the E51 resin were 11.78, 11.57, 11.48 and 11.14 MPa1/2 at 30, 40, 50 and 60 degrees C, respectively. The dispersive component (delta(D)) and the specific component (delta(SP)) of solubility parameter at different temperatures of the E51 resin were investigated according to the relationships between surface tension, cohesion energy and solubility parameter. The results showed that the values of delta(D) were higher than those of delta(SP) for the epoxy resin, and both of them decreased with the increase of temperature.

  8. Dynamic surface tension measured with an integrated sensor-actuator using electrolytically generated gas bubbles

    NARCIS (Netherlands)

    Olthuis, Wouter; Volanschi, Alex; Bergveld, Piet

    1998-01-01

    In this paper, a new, simple method to determine dynamic surface tension in aqueous solutions is reported, explained and experimentally verified. By function integration, a small device is obtained. Apart from control and interface electronics no external components or systems are necessary. Instead

  9. Dynamic surface tension measured with an integrated sensor-actuator device using electrolytically generated gas bubbles

    NARCIS (Netherlands)

    Olthuis, Wouter; Volanschi, Alex; Bergveld, Piet

    1997-01-01

    In this paper, a new, simple method to determine dynamic surface tension in aqueous solutions is reported, explained and experimentally verified. By function integration, a small device is obtained; apart from control and interface electronics no external components or systems are necessary. Instead

  10. Development of corresponding states model for estimation of the surface tension of chemical compounds

    DEFF Research Database (Denmark)

    Gharagheizi, Farhad; Eslamimanesh, Ali; Sattari, Mehdi;

    2013-01-01

    include critical temperature or temperature/critical volume/acentric factor/critical pressure/reduced temperature/reduced normal boiling point temperature/molecular weight of the compounds. Around 1,300 surface tension data of 118 random compounds are used for developing the first model (a four...

  11. On the interfacial behavior of ionic liquids: surface tensions and contact angles.

    Science.gov (United States)

    Restolho, José; Mata, José L; Saramago, Benilde

    2009-12-01

    In this work the liquid/vapour and the solid/liquid interfaces of a series of ionic liquids: 1-ethyl-3-methylpyridinium ethyl sulfate, [EMPy][EtSO4], 1-ethyl-3-methylimidazolium ethyl sulfate, [EMIM][EtSO4], 1-ethanol-3-methylimidazolium tetrafluoroborate, [C2OHMIM][BF4], 1-butyl-3-methylimidazolium tetrafluoroborate, [BMIM][BF4], and 1-octyl-3-methylimidazolium tetrafluoroborate, [OMIM][BF4], were investigated. The surface tension was measured in a wide temperature range, (298-453) K. The contact angles were determined on substrates of different polarities. Both on the polar (glass) and the non-polar substrates ((poly-(tetrafluoroethylene) and poly-(ethylene)), the liquids with maximum and minimum surface tensions lead, respectively, to the highest and the lowest contact angles. The dispersive, gamma(L)(d), and non-dispersive, gamma(L)(nd), components of the liquid surface tension, gamma(L), were calculated from the contact angles on the non-polar substrates using the Fowkes approach. The polarity fraction, gamma(L)(nd)/gamma(L), was compared with the polarity parameter, k, obtained from the fitting of the surface tension vs. temperature data to the Eötvös equation. Good agreement was found for the extreme cases: [OMIM][BF4] exhibits the lowest polarity and [BMIM][BF4], the highest. When compared with the polarity fractions of standard liquids considered as "polar" liquids, the ionic liquids studied may be considered as moderately polar.

  12. Fowler's approximation for the surface tension and surface energy of Lennard-Jones fluids revisited

    Energy Technology Data Exchange (ETDEWEB)

    Mulero, A [Departamento de Fisica, Universidad de Extremadura, 06071-Badajoz (Spain); Galan, C [Departamento de Fisica, Universidad de Extremadura, 06071-Badajoz (Spain); Cuadros, F [Departamento de Fisica, Universidad de Extremadura, 06071-Badajoz (Spain)

    2003-04-16

    We present a detailed study of the validity of Fowler's approximation for calculating the surface tension and the surface energy of Lennard-Jones fluids. To do so, we consider three different explicit analytical expressions for the radial distribution function (RDF), including one proposed by our research group, together with very accurate expressions for the liquid and vapour densities, also proposed by our group. The calculation of the surface tension from the direct correlation function using both the Percus-Yevick and the hypernetted-chain approximations is also considered. Finally, our results are compared with those obtained by other authors by computer simulations or through relevant theoretical approximations. In particular, we consider the analytical expression proposed by Kalikmanov and Hofmans (1994 J. Phys.: Condens. Matter 6 2207-14) for the surface tension. Our results indicate that the values for the surface energy in Fowler's approximation obtained by other authors are adequate, and can be calculated from the RDF models. For the surface tension, however, the values considered as valid in previous works seem to be incorrect. The correct values can be obtained from our model for the RDF or from the Kalikmanov and Hofmans expression with suitable inputs.

  13. All-Optical Surface Micropatterning by Electric Field Intensity Gradient

    Directory of Open Access Journals (Sweden)

    U. Gertners

    2015-01-01

    Full Text Available In this report an all-optical photo-induced formation of surface relief gratings is shown. For the surface patterning of As2S3 and As4S1.5Se4.5 films a direct holographic recording setup with a 532 nm wavelength Nd:YAG CW laser light was used. Our investigations have shown that the light-induced mass transfer process strongly depends on the material itself and on the polarization of the light. It has been shown that an electric field intensity gradient has to be obtained to achieve a direct patterning. The evolution of a surface relief in relation to recording parameters and thickness of the sample has been investigated in detail.

  14. In situ droplet surface tension and viscosity measurements in gas metal arc welding

    Science.gov (United States)

    Bachmann, B.; Siewert, E.; Schein, J.

    2012-05-01

    In this paper, we present an adaptation of a drop oscillation technique that enables in situ measurements of thermophysical properties of an industrial pulsed gas metal arc welding (GMAW) process. Surface tension, viscosity, density and temperature were derived expanding the portfolio of existing methods and previously published measurements of surface tension in pulsed GMAW. Natural oscillations of pure liquid iron droplets are recorded during the material transfer with a high-speed camera. Frame rates up to 30 000 fps were utilized to visualize iron droplet oscillations which were in the low kHz range. Image processing algorithms were employed for edge contour extraction of the droplets and to derive parameters such as oscillation frequencies and damping rates along different dimensions of the droplet. Accurate surface tension measurements were achieved incorporating the effect of temperature on density. These are compared with a second method that has been developed to accurately determine the mass of droplets produced during the GMAW process which enables precise surface tension measurements with accuracies up to 1% and permits the study of thermophysical properties also for metals whose density highly depends on temperature. Thermophysical properties of pure liquid iron droplets formed by a wire with 1.2 mm diameter were investigated in a pulsed GMAW process with a base current of 100 A and a pulse current of 600 A. Surface tension and viscosity of a sample droplet were 1.83 ± 0.02 N m-1 and 2.9 ± 0.3 mPa s, respectively. The corresponding droplet temperature and density are 2040 ± 50 K and 6830 ± 50 kg m-3, respectively.

  15. Design of a vapor-liquid-equilibrium, surface tension, and density apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, C.D.; Outcalt, S.L. [National Institute of Standards and Technology, Boulder, CO (United States)

    1997-12-31

    The design and performance of a unique vapor-liquid equilibrium (VLE) apparatus with density and surface tension capabilities is presented. The apparatus operates at temperatures ranging from 218 to 423 K, at pressures to 17 MPa, at densities to 1100 kg/m{sup 3}, and at surface tensions ranging from 0.1 to 75 mN/m. Temperatures are measured with a precision of {+-}0.02 K, pressures with a precision of {+-}0.1% of full scale, densities with a precision of {+-}0.5 kg/m{sup 3}, surface tensions with a precision of {+-}0.2 mN/m, and compositions with a precision of {+-}0.005 mole fraction. The apparatus is designed to be both accurate and versatile. Capabilities include: (1) the ability to operate the apparatus as a bubble point pressure or an isothermal pressure-volume-temperature (PVT) apparatus, (2) the ability to measure densities and surface tensions of the coexisting phases, and (3) the ability for either trapped or capillary sampling. We can validate our VLE and density data by measuring PVT or bubble point pressures in the apparatus. The use of the apparatus for measurements of VLE, densities, and surface tensions over wide ranges of temperature and pressure is important in equation of state and transport property model development. The use of different sampling procedures allows measurement of a wider variety of fluid mixtures. VLE measurements on the alternative refrigerant system R32/134a are presented and compared to literature results to verify the performance of the apparatus.

  16. Development of Maximum Bubble Pressure Method for Surface Tension Measurement of High Viscosity Molten Silicate

    Science.gov (United States)

    Takeda, Osamu; Iwamoto, Hirone; Sakashita, Ryota; Iseki, Chiaki; Zhu, Hongmin

    2017-07-01

    A surface tension measurement method based on the maximum bubble pressure (MBP) method was developed in order to precisely determine the surface tension of molten silicates in this study. Specifically, the influence of viscosity on surface tension measurements was quantified, and the criteria for accurate measurement were investigated. It was found that the MBP apparently increased with an increase in viscosity. This was because extra pressure was required for the flowing liquid inside the capillary due to viscous resistance. It was also expected that the extra pressure would decrease by decreasing the fluid velocity. For silicone oil with a viscosity of 1000 \\hbox {mPa}{\\cdot }\\hbox {s}, the error on the MBP could be decreased to +1.7 % by increasing the bubble detachment time to 300 \\hbox {s}. However, the error was still over 1 % even when the bubble detachment time was increased to 600 \\hbox {s}. Therefore, a true value of the MBP was determined by using a curve-fitting technique with a simple relaxation function, and that was succeeded for silicone oil at 1000 \\hbox {mPa}{\\cdot } \\hbox {s} of viscosity. Furthermore, for silicone oil with a viscosity as high as 10 000 \\hbox {mPa}{\\cdot }\\hbox {s}, the apparent MBP approached a true value by interrupting the gas introduction during the pressure rising period and by re-introducing the gas at a slow flow rate. Based on the fundamental investigation at room temperature, the surface tension of the \\hbox {SiO}2-40 \\hbox {mol}%\\hbox {Na}2\\hbox {O} and \\hbox {SiO}2-50 \\hbox {mol}%\\hbox {Na}2\\hbox {O} melts was determined at a high temperature. The obtained value was slightly lower than the literature values, which might be due to the influence of viscosity on surface tension measurements being removed in this study.

  17. Derivation of a viscous KP including surface tension, and related equations

    CERN Document Server

    Meur, Hervé Le

    2015-01-01

    The aim of this article is to derive surface wave models in the presence of surface tension and viscosity. Using the Navier-Stokes equations with a free surface, flat bottom and surface tension, we derive the viscous 2D Boussinesq system with a weak transverse variation. The assumed transverse variation is on a larger scale than along the main propagation direction. This Boussinesq system is only an intermediate result that enables us to derive the Kadomtsev-Petviashvili (KP) equation which is a 2D generalization of the KdV equation. In addition, we get the 1D KdV equation, and lastly the Boussinesq equation. All these equations are derived for non-vanishing initial conditions.

  18. Tension induced surface plasmon-polaritons at graphene-based structure

    Science.gov (United States)

    Khalandi, G.; Namdar, A.; Entezar, S. Roshan

    2017-02-01

    Dispersion properties and field distributions of TM (or p-polarized) surface plasmon-polaritons have been investigated in the system that a strained graphene sheet cladded by two dielectrics. The outcomes show that graphene TM surface plasmon-polaritons are bound confined modes, and the field components penetrate into the dielectric layers in the rang that is very smaller than the wavelength in the free space. At low photon energies, when the tension is along the zigzag (armchair) direction and parallel (perpendicular) to the tangential electric field, the wavelength, propagation length and penetration depth of TM surface plasmon-polaritons increase (decrease) with increasing the strain. Changing the angle between the tension direction and tangential electric field at cases with the constant strain, cause to existence of TM surface plasmon-polaritons in the wider range of frequency.

  19. Spreading of oil on water in the surface-tension regime

    Energy Technology Data Exchange (ETDEWEB)

    Camp, D.W.; Berg, J.C.

    1987-11-01

    Data which describe the unidirectional spreading of several pure oils and oil-surfactant mixtures on water in the surface-tension regime are reported. Leading-edge position and profiles of velocity, thickness and film tension are given as functions of time. The data are consistent with the numerical similarity solution of Foda and Cox (1980), although the measured dependence of the film tension on the film thickness often differs from the equilibrium relationship. The configuration of the oil film near the spreading origin may be either a coherent multimolecular layer or a multitude of thinning, outward-moving lenses surrounded by monolayer. The pure oils show an acceleration zone connecting the slow-moving inner region to a fast-moving outer region, while the oil-surfactant mixtures show a much more gradual increase in film velocity.

  20. Account for the surface tension in hydraulic modeling of the weir with a sharp threshold

    Directory of Open Access Journals (Sweden)

    Medzveliya Manana Levanovna

    Full Text Available In the process of calculating and simulating water discharge in free channels it is necessary to know the flow features in case of small values of Reynolds and Weber numbers. The article considers the influence of viscosity and surface tension on the coefficient of a weir flow with sharp threshold. In the article the technique of carrying out experiments is stated, the equation is presented, which considers the influence of all factors: pressure over a spillway threshold, threshold height over a course bottom, speed of liquid, liquid density, dynamic viscosity, superficial tension, gravity acceleration, unit discharge, the width of the course. The surface tension and liquid density for the applied liquids changed a little. In the rectangular tray (6000x100x200 spillway with a sharp threshold was established. It is shown that weir flow coefficient depends on Reynolds number (in case Re < ~ 2000 and Webers number. A generalized expression for determining weir flow coefficient considering the influence of the forces of viscosity and surface tension is received.

  1. Surface tension of polytetrafluoroethylene and its wetting by aqueous solution of some surfactants and their mixtures

    Science.gov (United States)

    Mańko, Diana; Zdziennicka, Anna; Jańczuk, Bronisław

    2017-01-01

    Measurements of the contact angle of aqueous solution of rhamnolipid (RL) mixture with n-octyl-β-D-glucopyranoside (OGP), Triton X-100 (TX-100) or/and sodium dodecylsulfate (SDDS) on polytetrafluoroethylene (PTFE) were made. To this aim there was used a plate whose surface topography was analyzed by means of optical profilometry method. Additionally, plate surface chemistry was studied employing the Fourier transform infrared spectroscopy. The obtained values of contact angle were discussed based on the PTFE surface tension (γSV) as well as the Lifshitz-van der Waals component of the water surface tension (γWLW). The contact angle of aqueous solution of several surfactants and their mixtures on PTFE was also considered on the basis of γSV and γWLW . It occured that by using the values of γSV , γWLW and surface tension of the aqueous solution of surfactants and their mixtures, the contact angle on PTFE can be predicted. It also occured that changes of adhesion tension of aqueous solutions of surfactants as a function of their concentration can be determined by the exponential function of the first or second order. Using such functions Gibbs surface excess concentration of surfactants at the PTFE-water interface, mole fraction of surfactant in the mixed monolayer and fraction of the area occupied by given surfactants in the monolayer were determined. Gibbs surface free energy of adsorption of a given surfactant in the presence of another one and adhesion work of the aqueous solution of surfactants to the PTFE surface were also evaluated.

  2. The effect of surface tension reduction on the clinical performance of sodium hypochlorite in endodontics.

    Science.gov (United States)

    Rossi-Fedele, G; Prichard, J W; Steier, L; de Figueiredo, J A P

    2013-06-01

    Sodium hypochlorite (NaOCl) is recommended as an endodontic irrigant in view of its broad antimicrobial and tissue dissolution capacities. To enhance its penetration into inaccessible areas of root canals and to improve its overall effect, the addition of surface-active agents has been suggested. The aim of this investigation was to review the effect of the reduction of the surface tension on the performance of NaOCl in endodontics. A search was performed in the Medline electronic database (articles published up to 28 July 2012, in English) with the search terms and combinations as follows: 'sodium hypochlorite AND surface tension or interfacial force or interfacial tension or surface-active agent or amphiphilic agent or surface active agent or surfactant or tenside or detergent'. The purpose of this search was to identify publications that compared NaOCl alone and NaOCl modified with the addition of a surface-active agent in endodontics. A hand search of articles published online ('in-press' and 'early view'), and appearing in the reference list of the articles included, was further performed, using the same search criteria as the electronic search. The search identified 302 publications, of which 11 fulfilled the inclusion/exclusion criteria of the review. The evidence available suggests that surface-active agents improve the penetration of NaOCl in the main canal and have no effect on its pulp tissue dissolution ability. There are, however, insufficient data to enable a sound conclusion to be drawn regarding the effect of modifying NaOCl's surface tension on lubrication, antimicrobial and smear layer or debris removal abilities. © 2012 International Endodontic Journal.

  3. Interfacial Tension and Surface Pressure of High Density Lipoprotein, Low Density Lipoprotein, and Related Lipid Droplets

    DEFF Research Database (Denmark)

    Ollila, O. H. S.; Lamberg, A.; Lehtivaara, M.

    2012-01-01

    Lipid droplets play a central role in energy storage and metabolism on a cellular scale. Their core is comprised of hydrophobic lipids covered by a surface region consisting of amphiphilic lipids and proteins. For example, high and low density lipoproteins (HDL and LDL, respectively) are essentia...... of interfacial tension becomes significant for particles with a radius of similar to 5 nm, when the area per molecule in the surface region is...

  4. Surface Tension Estimates for Droplet Formation in Slurries with Low Concentrations of Hydrophobic Particles, Polymer Flocculants or Surface-Active Contaminants

    Energy Technology Data Exchange (ETDEWEB)

    Gauglitz, Phillip A.; Mahoney, Lenna A.; Blanchard, Jeremy; Bamberger, Judith A.

    2011-06-10

    In support of the K-Basin project, Pacific Northwest National Laboratory (PNNL) was requested to evaluate the appropriate surface tension value to use in models predicting the formation of droplets from spray leaks of K-Basin slurries. The specific issue was whether it was more appropriate to use the surface tension of pure water in model predictions for all plausible spray leaks or to use a lower value. The surface tension of K-Basin slurries is potentially affected not only by particles but by low concentrations of nonionic polyacrylamide flocculant and perhaps by contaminants with surfactant properties, which could decrease the surface tension below that of water. A lower surface tension value typically results in smaller droplets being formed with a larger fraction of droplets in the respirable size range, so using the higher surface tension value of pure water is not conservative and thus needs a strong technical basis.

  5. The effects of nonuniform surface tension on the axisymmetric gravity-driven spreading of a thin liquid drop

    Directory of Open Access Journals (Sweden)

    E. Momoniat

    2005-01-01

    surface tension can be represented as a power law in r. The effect of this nonuniformity is to reduce the surface tension at the centre of the drop and increase it at the foot of the drop. This results in a deflection away from the solution for spreading under gravity only and the formation of a capillary ridge.

  6. Motion of Drops on Surfaces with Wettability Gradients

    Science.gov (United States)

    Subramanian, R. Shankar; McLaughlin, John B.; Moumen, Nadjoua; Qian, Dongying

    2002-01-01

    A liquid drop present on a solid surface can move because of a gradient in wettability along the surface, as manifested by a gradient in the contact angle. The contact angle at a given point on the contact line between a solid and a liquid in a gaseous medium is the angle between the tangent planes to the liquid and the solid surfaces at that point and is measured within the liquid side, by convention. The motion of the drop occurs in the direction of increasing wettability. The cause of the motion is the net force exerted on the drop by the solid surface because of the variation of the contact angle around the periphery. This force causes acceleration of an initially stationary drop, and leads to its motion in the direction of decreasing contact angle. The nature of the motion is determined by the balance between the motivating force and the resisting hydrodynamic force from the solid surface and the surrounding gaseous medium. A wettability gradient can be chemically induced as shown by Chaudhury and Whitesides who provided unambiguous experimental evidence that drops can move in such gradients. The phenomenon can be important in heat transfer applications in low gravity, such as when condensation occurs on a surface. Daniel et al have demonstrated that the velocity of a drop on a surface due to a wettability gradient in the presence of condensation can be more than two orders of magnitude larger than that observed in the absence of condensation. In the present research program, we have begun to study the motion of a drop in a wettability gradient systematically using a model system. Our initial efforts will be restricted to a system in which no condensation occurs. The experiments are performed as follows. First, a rectangular strip of approximate dimensions 10 x 20 mm is cut out of a silicon wafer. The strip is cleaned thoroughly and its surface is exposed to the vapor from an alkylchlorosilane for a period lasting between one and two minutes inside a

  7. Dynamics of surface tension driven mixing of an alcohol droplet with water

    Science.gov (United States)

    Dandekar, Raj; Pant, Anurag; Puthenveettil, Baburaj

    2016-11-01

    We study the flow induced by the surface tension driven spreading of an ethanol droplet of radius rd on the surface of a 5mm water layer, visualizing the flow using aluminium flakes on the surface of the water layer with backlighting and high speed imaging. The concentration of tracer aluminium particles was found to have no effect on the scaling law for spreading.The drop,when brought in contact with the water surface causes a local depression in surface tension ,resulting in a thin circular region to expand radially outwards.We observe that the dimensionless radius of the expanding front (r* =r/rd) scales with the dimensionless time (t* = μ rd/ Δγ) , as r* t*1/4,where μ is the viscosity of water and Δγ is the surface tension difference between water and the ethanol droplet.A scaling analysis taking the viscous and the marangoni forces into account explains the observed scaling law.Our observations differ from that in the case of continuous alcohol supply where the observed scaling law is r* t*1/2. The expanding front radius reaches a maximum value and then decreases with time.

  8. Directional Reflective Surface Formed via Gradient-Impeding Acoustic Meta-Surfaces

    Science.gov (United States)

    Song, Kyungjun; Kim, Jedo; Hur, Shin; Kwak, Jun-Hyuk; Lee, Seong-Hyun; Kim, Taesung

    2016-08-01

    Artificially designed acoustic meta-surfaces have the ability to manipulate sound energy to an extraordinary extent. Here, we report on a new type of directional reflective surface consisting of an array of sub-wavelength Helmholtz resonators with varying internal coiled path lengths, which induce a reflection phase gradient along a planar acoustic meta-surface. The acoustically reshaped reflective surface created by the gradient-impeding meta-surface yields a distinct focal line similar to a parabolic cylinder antenna, and is used for directive sound beamforming. Focused beam steering can be also obtained by repositioning the source (or receiver) off axis, i.e., displaced from the focal line. Besides flat reflective surfaces, complex surfaces such as convex or conformal shapes may be used for sound beamforming, thus facilitating easy application in sound reinforcement systems. Therefore, directional reflective surfaces have promising applications in fields such as acoustic imaging, sonic weaponry, and underwater communication.

  9. Directional Reflective Surface Formed via Gradient-Impeding Acoustic Meta-Surfaces

    Science.gov (United States)

    Song, Kyungjun; Kim, Jedo; Hur, Shin; Kwak, Jun-Hyuk; Lee, Seong-Hyun; Kim, Taesung

    2016-01-01

    Artificially designed acoustic meta-surfaces have the ability to manipulate sound energy to an extraordinary extent. Here, we report on a new type of directional reflective surface consisting of an array of sub-wavelength Helmholtz resonators with varying internal coiled path lengths, which induce a reflection phase gradient along a planar acoustic meta-surface. The acoustically reshaped reflective surface created by the gradient-impeding meta-surface yields a distinct focal line similar to a parabolic cylinder antenna, and is used for directive sound beamforming. Focused beam steering can be also obtained by repositioning the source (or receiver) off axis, i.e., displaced from the focal line. Besides flat reflective surfaces, complex surfaces such as convex or conformal shapes may be used for sound beamforming, thus facilitating easy application in sound reinforcement systems. Therefore, directional reflective surfaces have promising applications in fields such as acoustic imaging, sonic weaponry, and underwater communication. PMID:27562634

  10. Surface tension driven processes densify and retain permeability in magma and lava

    Science.gov (United States)

    Kennedy, Ben M.; Wadsworth, Fabian B.; Vasseur, Jérémie; Ian Schipper, C.; Mark Jellinek, A.; von Aulock, Felix W.; Hess, Kai-Uwe; Kelly Russell, J.; Lavallée, Yan; Nichols, Alexander R. L.; Dingwell, Donald B.

    2016-01-01

    We offer new insights into how an explosive eruption can transition into an effusive eruption. Magma containing >0.2 wt% dissolved water has the potential to vesiculate to a porosity in excess of 80 vol.% at atmospheric pressure. Thus all magmas contain volatiles at depth sufficient to form foams and explosively fragment. Yet gas is often lost passively and effusive eruptions ensue. Magmatic foams are permeable and understanding permeability in magma is crucial for models that predict eruptive style. Permeability also governs magma compaction models. Those models generally imply that a reduction in magma porosity and permeability generates an increased propensity for explosivity. Here, our experimental results show that surface tension stresses drive densification without creating an impermeable 'plug', offering an additional explanation of why dense magmas can avoid explosive eruption. In both an open furnace and a closed autoclave, we subject pumice samples with initial porosity of ∼70 vol.% to a range of isostatic pressures (0.1-11 MPa) and temperatures (350-950 °C) relevant to shallow volcanic environments. Our experimental data and models constrain the viscosity, permeability, timescales, and length scales over which densification by pore-scale surface tension stresses competes with density-driven compaction. Where surface tension dominates the dynamics, densification halts at a plateau connected porosity of ∼25 vol.% for our samples. SEM, pycnometry and micro-tomography show that in this process (1) microporous networks are destroyed, (2) the relative pore network surface area decreases, and (3) a remaining crystal framework enhances the longevity of macro-pore connectivity and permeability critical for sustained outgassing. We propose that these observations are a consequence of a surface tension-driven retraction of viscous pore walls at areas of high bubble curvature (micro-vesicular network terminations), and that this process drives bulk

  11. Wetting Angle and Surface Tension of Germanium Melts on Different Substrate Materials

    Science.gov (United States)

    Kaiser, N.; Croell, A.; Szofran, F. R.; Benz, K. W.; Rose, M. Franklin (Technical Monitor)

    2001-01-01

    The sessile drop technique has been used to measure the wetting angle and the surface tension of molten germanium (Ge) on various substrate materials. Sapphire, fused silica, glassy carbon, graphite, SiC, carbon-based aerogel, pyrolytic boron nitride (pBN), AlN, Si3N4, and CVD diamond were used as substrate materials. In addition, the effects of different cleaning procedures and surface treatments on the wetting behavior were investigated. The highest wetting angles with values around 170 deg. were found for pBN substrates under active vacuum or with a slight overpressure of 5N Argon or forming gas (2% Hydrogen in 5N Argon). The measurement of the surface tension and its temperature dependence for Ge under a forming gas atmosphere resulted in gamma(T) = 591 - 0.077 (T-T(sub m).

  12. From density to interface fluctuations: the origin of wavelength dependence in surface tension.

    Science.gov (United States)

    Hiester, Thorsten

    2008-12-01

    The height-height correlation function for a fluctuating interface between two coexisting bulk phases is derived by means of general equilibrium properties of the corresponding density-density correlation function. A wavelength-dependent surface tension gamma(q) can be defined and expressed in terms of the direct correlation function c(r,r;{'}) , the equilibrium density profile rho_{0}(r) , and an operator which relates density to surface configurations. Neither the concept of an effective interface Hamiltonian nor the difference in pressure is needed to determine the general structure of the height-height correlations or gamma(q) , respectively. This result generalizes the Mecke-Dietrich surface tension gamma_{MD}(q) [Phys. Rev. E 59, 6766 (1999)] and modifies recently published criticism concerning gamma_{MD}(q) [Tarazona, Checa, and Chacón, Phys. Rev. Lett. 99, 196101 (2007)].

  13. The Role of Surface Tension in the Crystallization of Metal Halide Perovskites

    KAUST Repository

    Zhumekenov, Ayan A.

    2017-07-06

    The exciting intrinsic properties discovered in single crystals of metal halide perovskites still await their translation into optoelectronic devices. The poor understanding and control of the crystallization process of these materials are current bottlenecks retarding the shift towards single crystal-based optoelectronics. Here we theoretically and experimentally elucidate the role of surface tension in the rapid synthesis of perovskite single crystals by inverse temperature crystallization (ITC). Understanding the nucleation and growth mechanisms enabled us to exploit surface tension to direct the growth of monocrystalline films of perovskites (AMX3, where A = CH3NH3+ or MA; M = Pb2+, Sn2+; X = Br-, I-) on the solution surface. We achieve up to 1 cm2-sized monocrystalline films with thickness on the order of the charge carrier diffusion length (~5-10 µm). Our work paves the way to control the crystallization process of perovskites, including thin film deposition, which is essential to advance the performance benchmarks of perovskite optoelectronics.

  14. Contact angle and surface tension measurements of a five-ring polyphenyl ether

    Science.gov (United States)

    Jones, W. R., Jr.

    1986-01-01

    Contact angle measurements were performed for a five-ring polyphenyl ether isomeric mixture on M-50 steel in a dry nitrogen atmosphere. Two different techniques were used: (1) a tilting plate apparatus, and (2) a sessile drop apparatus. Measurements were made for the temperature range 25 to 190 C. Surface tension was measured by a differential maximum bubble pressure technique over the range 23 to 220 C in room air. The critical surface energy of spreading (gamma /sub c/) was determined for the polyphenyl ether by plotting the cosine of the contact angle (theta) versus the surface tension (gamma /sub LV/). The straight line intercept at cosine theta = 1 is defined as gamma (sub c). Gamma (sub c) was found to be 30.1 dyn/cm for the tilting plate technique and 31.3 dyn/cm for the sessile drop technique. These results indicate that the polyphenyl ether is inherently autophobic (i.e., it will not spread on its own surface film until its surface tension is less than gamma /sub c/). This phenomenon is discussed in light of the wettability and wear problems encountered with this fluid.

  15. Role of viscosity and surface tension of zebrafish embryonic tissues in tissue flows during gastrulation.

    Science.gov (United States)

    Schoetz, E. M.; Bacarian, T.; Steinberg, M. S.; Burdine, R. D.; Bialek, W.; Heisenberg, C. P.; Foty, R. A.; Julicher, F.

    2007-03-01

    At the onset of gastrulation in zebrafish, complex flows and cell movements occur, which are not well understood. Here, we study the material properties of zebrafish embryonic tissues which are important for the tissue dynamics. We found that these tissues behave viscoelastic and exhibit liquid-like properties on long time scales. They relax internal stress caused by compressive forces or, in the absence of external forces, round up and fuse into spheres to minimize their free surface. Quantitative differences in the adhesivity between different types of tissues result in their immiscibility and sorting behavior analogous to that of ordinary immiscible liquids. When mixed, cells segregate into discrete phases, and the position adopted correlates with differences in the aggregate surface tensions for these phases. Surface tensions were measured with a tissue surface tensiometer. Aggregates were compressed and their force response and shape were recorded as a function of time. From the analysis of the force-relaxation curves, we determined the surface tensions, relaxation times, tissue viscosities and shear moduli. Furthermore, by 4D-cell tracking, we measured kinetic parameters such as cell speed, directionality and persistence of cell movement.

  16. Role of surface tension and roughness on the wettability of Er:YAG laser irradiated dentin: In vitro study

    OpenAIRE

    2013-01-01

    Introduction: The aim of this “in vitro” study was to evaluate the role of surface tension and surface roughness in the wettability, considered essential for a good adhesion, comparing Er:YAG laser - to bur-prepared dentin.

  17. A finite-volume HLLC-based scheme for compressible interfacial flows with surface tension

    Energy Technology Data Exchange (ETDEWEB)

    Garrick, Daniel P. [Department of Aerospace Engineering, Iowa State University, Ames, IA (United States); Owkes, Mark [Department of Mechanical and Industrial Engineering, Montana State University, Bozeman, MT (United States); Regele, Jonathan D., E-mail: jregele@iastate.edu [Department of Aerospace Engineering, Iowa State University, Ames, IA (United States)

    2017-06-15

    Shock waves are often used in experiments to create a shear flow across liquid droplets to study secondary atomization. Similar behavior occurs inside of supersonic combustors (scramjets) under startup conditions, but it is challenging to study these conditions experimentally. In order to investigate this phenomenon further, a numerical approach is developed to simulate compressible multiphase flows under the effects of surface tension forces. The flow field is solved via the compressible multicomponent Euler equations (i.e., the five equation model) discretized with the finite volume method on a uniform Cartesian grid. The solver utilizes a total variation diminishing (TVD) third-order Runge–Kutta method for time-marching and second order TVD spatial reconstruction. Surface tension is incorporated using the Continuum Surface Force (CSF) model. Fluxes are upwinded with a modified Harten–Lax–van Leer Contact (HLLC) approximate Riemann solver. An interface compression scheme is employed to counter numerical diffusion of the interface. The present work includes modifications to both the HLLC solver and the interface compression scheme to account for capillary force terms and the associated pressure jump across the gas–liquid interface. A simple method for numerically computing the interface curvature is developed and an acoustic scaling of the surface tension coefficient is proposed for the non-dimensionalization of the model. The model captures the surface tension induced pressure jump exactly if the exact curvature is known and is further verified with an oscillating elliptical droplet and Mach 1.47 and 3 shock-droplet interaction problems. The general characteristics of secondary atomization at a range of Weber numbers are also captured in a series of simulations.

  18. A finite-volume HLLC-based scheme for compressible interfacial flows with surface tension

    Science.gov (United States)

    Garrick, Daniel P.; Owkes, Mark; Regele, Jonathan D.

    2017-06-01

    Shock waves are often used in experiments to create a shear flow across liquid droplets to study secondary atomization. Similar behavior occurs inside of supersonic combustors (scramjets) under startup conditions, but it is challenging to study these conditions experimentally. In order to investigate this phenomenon further, a numerical approach is developed to simulate compressible multiphase flows under the effects of surface tension forces. The flow field is solved via the compressible multicomponent Euler equations (i.e., the five equation model) discretized with the finite volume method on a uniform Cartesian grid. The solver utilizes a total variation diminishing (TVD) third-order Runge-Kutta method for time-marching and second order TVD spatial reconstruction. Surface tension is incorporated using the Continuum Surface Force (CSF) model. Fluxes are upwinded with a modified Harten-Lax-van Leer Contact (HLLC) approximate Riemann solver. An interface compression scheme is employed to counter numerical diffusion of the interface. The present work includes modifications to both the HLLC solver and the interface compression scheme to account for capillary force terms and the associated pressure jump across the gas-liquid interface. A simple method for numerically computing the interface curvature is developed and an acoustic scaling of the surface tension coefficient is proposed for the non-dimensionalization of the model. The model captures the surface tension induced pressure jump exactly if the exact curvature is known and is further verified with an oscillating elliptical droplet and Mach 1.47 and 3 shock-droplet interaction problems. The general characteristics of secondary atomization at a range of Weber numbers are also captured in a series of simulations.

  19. Neutron-skin thickness determines the surface tension of a compressible nuclear droplet

    Science.gov (United States)

    Horiuchi, W.; Ebata, S.; Iida, K.

    2017-09-01

    We systematically investigate the neutron-skin thickness of neutron-rich nuclei within a compressible droplet model, which includes several parameters characterizing the surface tension and the equation of state (EOS) of asymmetric nuclear matter as well as corrections due to the surface diffuseness. Such a systematic analysis helps towards constraining the EOS parameters of asymmetric nuclear matter and the poorly known density dependence of the surface tension; the latter is estimated with help of available experimental data for the neutron and proton density distributions and the nuclear masses. Validity of the present approach is confirmed by calculating realistic density distributions of Ca, Ni, Zr, Sn, Yb, and Pb isotopes within a microscopic Skyrme-Hartree-Fock+BCS method for various sets of the effective nuclear force. Our macroscopic model accompanied by the diffuseness corrections works well in the sense that it well reproduces the evolution of the microscopically deduced neutron-skin thickness with respect to the neutron number for selected sets of the effective nuclear force. We find that the surface tension of the compressible nuclear droplet is a key to bridging a gap between microscopic and macroscopic approaches.

  20. Characterizing developing adverse pressure gradient flows subject to surface roughness

    Science.gov (United States)

    Brzek, Brian; Chao, Donald; Turan, Özden; Castillo, Luciano

    2010-04-01

    An experimental study was conducted to examine the effects of surface roughness and adverse pressure gradient (APG) on the development of a turbulent boundary layer. Hot-wire anemometry measurements were carried out using single and X-wire probes in all regions of a developing APG flow in an open return wind tunnel test section. The same experimental conditions (i.e., T ∞, U ref, and C p) were maintained for smooth, k + = 0, and rough, k + = 41-60, surfaces with Reynolds number based on momentum thickness, 3,000 carefully designed such that the x-dependence in the flow field was known. Despite this fact, only a very small region of the boundary layer showed a balance of the various terms in the integrated boundary layer equation. The skin friction computed from this technique showed up to a 58% increase due to the surface roughness. Various equilibrium parameters were studied and the effect of roughness was investigated. The generated flow was not in equilibrium according to the Clauser (J Aero Sci 21:91-108, 1954) definition due to its developing nature. After a development region, the flow reached the equilibrium condition as defined by Castillo and George (2001), where Λ = const, is the pressure gradient parameter. Moreover, it was found that this equilibrium condition can be used to classify developing APG flows. Furthermore, the Zagarola and Smits (J Fluid Mech 373:33-79, 1998a) scaling of the mean velocity deficit, U ∞δ*/δ, can also be used as a criteria to classify developing APG flows which supports the equilibrium condition of Castillo and George (2001). With this information a ‘full APG region’ was defined.

  1. Reactive processing of formaldehyde and acetaldehyde in aqueous aerosol mimics: surface tension depression and secondary organic products

    Directory of Open Access Journals (Sweden)

    Z. Li

    2011-07-01

    Full Text Available The reactive uptake of carbonyl-containing volatile organic compounds (cVOCs by aqueous atmospheric aerosols is a likely source of particulate organic material. The aqueous-phase secondary organic products of some cVOCs are surface-active. Therefore, cVOC uptake can lead to organic film formation at the gas-aerosol interface and changes in aerosol surface tension. We examined the chemical reactions of two abundant cVOCs, formaldehyde and acetaldehyde, in water and aqueous ammonium sulfate (AS solutions mimicking tropospheric aerosols. Secondary organic products were identified using Aerosol Chemical Ionization Mass Spectrometry (Aerosol-CIMS, and changes in surface tension were monitored using pendant drop tensiometry. Hemiacetal oligomers and aldol condensation products were identified using Aerosol-CIMS. A hemiacetal sulfate ester was tentatively identified in the formaldehyde-AS system. Acetaldehyde depresses surface tension to 65(±2 dyn cm−1 in pure water and 62(±1 dyn cm−1 in AS solutions. Surface tension depression by formaldehyde in pure water is negligible; in AS solutions, a 9 % reduction in surface tension is observed. Mixtures of these species were also studied in combination with methylglyoxal in order to evaluate the influence of cross-reactions on surface tension depression and product formation in these systems. We find that surface tension depression in the solutions containing mixed cVOCs exceeds that predicted by an additive model based on the single-species isotherms.

  2. Superficial composition in binary solid solutions A(B): Drastic effect of pure element surface tensions

    Science.gov (United States)

    Rolland, A.; Aufray, B.

    1985-10-01

    This paper deals with a comparative study of surface segragation of Pb and Ni respectively from Ag(Pb)(111) and Ag(Ni)(111) solid solutions. A high level of segregation of the solute is observed for both systems characterized by very low solute solubility. However, the superficial composition strongly depends on the relative surface tensions of the pure elements: the solute atoms are strictly on superficial sites when γ solute is smaller than γ solvent; in contrast uppermost layer consists purely of solvent when γ solute is greater than γ solvent. Two schematic distributions in close proximity to the surface are proposed in the last case.

  3. Application of the Zisman Critical Surface Tension Technique to Textile Materials Using Contact Angle Measurements

    Institute of Scientific and Technical Information of China (English)

    江红; 迟克栋; 吴慧莉

    2001-01-01

    This is the first one that applies the Zisman critical surface tension technique successfully to textile materials. It was accomplished by carefully determination of the contact angle of fabric. The deviation caused by the porous structure of the fabric will be taken into account. To do so, a Jens equation is applied, and the measured contact angles can be corrected. The surface porosity was determined by measurement and approximate calculation, and the chemical composition of the surface was characterized by means of attenuated total reflection Fourier-transform infrared(FTIR/ATR).

  4. Possible Evidence for a New Form of Liquid Buried in the Surface Tension of Supercooled Water

    Science.gov (United States)

    Rogers, T. Ryan; Leong, Kai-Yang; Wang, Feng

    2016-09-01

    Contrary to the historical data, several recent experiments indicate that the surface tension of supercooled water follows a smooth extrapolation of the IAPWS equation in the supercooled regime. It can be seen, however, that a small deviation from the IAPWS equation is present in the recent experimental measurements. It is shown with simulations using the WAIL water potential that the small deviation in the experimental data is consistent with the tail of an exponential growth in surface tension as temperature decreases. The emergence temperature, Te, of a substantial deviation from the IAPWS equation is shown to be 227 K for the WAIL water and 235 K for real water. Since the 227 K Te is close to the Widom line in WAIL water, we argue that real water at 235 K approaches a similar crossover line at one atmospheric pressure.

  5. Discrepancies over the onset of surfactant monomer aggregation interpreted by fluorescence, conductivity and surface tension methods

    Directory of Open Access Journals (Sweden)

    Maria de Fátima Carvalho Costa

    1998-06-01

    Full Text Available Molecular probe techniques have made important contributions to the determination of microstructure of surfactant assemblies such as size, stability, micropolarity and conformation. Conductivity and surface tension were used to determine the critical aggregation concentration (cac of polymer-surfactant complexes and the critical micellar concentration (cmc of aqueous micellar aggregates. The results are compared with those of fluorescent techniques. Several surfactant systems were examined, 1-butanol-sodium dodecylsulfate (SDS mixtures, solutions containing poly(ethylene oxide-SDS, poly(vinylpyrrolidone-SDS and poly(acrylic acid-alkyltrimethylammonium bromide complexes. We found differences between the cac and cmc values obtained by conductivity or surface tension and those obtained by techniques which use hydrophobic probe.

  6. Synthesis and Surface Tension Properties of Polyethyleneimine—Polyethylene Oxide Block Copolymers

    Institute of Scientific and Technical Information of China (English)

    张剑; LONNIE,Bryant

    2003-01-01

    This peper describes the synthesis,surface tension and dispersancy properties of block copolymer nonionic surfactants comprised of polyethyleneimine(PEI) and polyethlene oxide(PEO) blocks of selected lengths.These block copolymers were prepared by a threestep synthetic sequence.Firstly,PEO glycol was converted to its dimethanesulphonylester (dimesyl) derivative by reacting with methanesulphonyl chloride.Then a tri-block polymer was preparaed by the ring-opening polymerization of 2-methly-2-oxazoline(MeOZO)with the dimesyl PEO derivative.Lastly,linear PEI blocks were obtained by subsequent hydrolysis and purification.1H NMR spectra confirmed the structures of the intermediate,final products and their purities(>99%).The utility of these block copolymers is described in terms of their surface tension and clay dispersancy measurements as a function of copolymer chain and block length.

  7. Light Meets Water in Nonlocal Media: Surface Tension Analogue in Optics

    Science.gov (United States)

    Horikis, Theodoros P.; Frantzeskakis, Dimitrios J.

    2017-06-01

    Shallow water wave phenomena find their analogue in optics through a nonlocal nonlinear Schrödinger (NLS) model in 2 +1 dimensions. We identify an analogue of surface tension in optics, namely, a single parameter depending on the degree of nonlocality, which changes the sign of dispersion, much like surface tension does in the shallow water wave problem. Using multiscale expansions, we reduce the NLS model to a Kadomtsev-Petviashvili (KP) equation, which is of the KPII (KPI) type, for strong (weak) nonlocality. We demonstrate the emergence of robust optical antidark solitons forming Y -, X -, and H -shaped wave patterns, which are approximated by colliding KPII line solitons, similar to those observed in shallow waters.

  8. Surface Tension of Methanol as a Function of cut-off Radius and Temperature Controllers

    Science.gov (United States)

    Obeidat, Abdalla; Jaradat, Adnan; Hamdan, Bushra

    Molecular dynamics is used to calculate the surface tension of van Leeuwen methanol. The van Leeuwen model of methanol is chosen over other models of methanol, since this model is widely used to study nucleation at low temperature. Usually, scientists use the cut-off radius to be three order of magnitude of segment diameter. In this study, we varied the cut-off radius to estimate the best cut-off at which the surface tension reaches its plateau. After deciding the best cut-off radius for van der Waals and Coulomb interactions (CUT-OFF and PME were used for Coulomb interaction), we varied the temperature controller (van-Housen, Berendsen, and v-rescale) to decide the best temperature controller to be used to study methanol. In all simulations, Gromacs is used at T =200-300K with periodic boundary conditions in all dimensions. JUST.

  9. Digital image processing of sectorial oscillations for acoustically levitated drops and surface tension measurement

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    A type of non-axisymmetric oscillations of acoustically levitated drops is excited by modulating the ultrasound field at proper frequencies. These oscillations are recorded by a high speed camera and analyzed with a digital image processing method. They are demonstrated to be the third mode sectorial oscillations, and their frequencies are found to decrease with the increase of equatorial radius of the drops, which can be described by a modified Rayleigh equation. These oscillations decay exponentially after the cessation of ultrasound field modulation. The decaying rates agree reasonably with Lamb’s prediction. The rotating rate of the drops accompanying the shape oscillations is found to be less than 1.5 rounds per second. The surface tension of aqueous ethanol has been measured according to the modified Rayleigh equation. The results agree well with previous reports, which demonstrates the possible application of this kind of sectorial oscillations in noncontact measurement of liquid surface tension.

  10. A Synthetic Phased Array Surface Acoustic Wave Sensor for Quantifying Bolt Tension

    Directory of Open Access Journals (Sweden)

    Rasim Guldiken

    2012-09-01

    Full Text Available In this paper, we report our findings on implementing a synthetic phased array surface acoustic wave sensor to quantify bolt tension. Maintaining proper bolt tension is important in many fields such as for ensuring safe operation of civil infrastructures. Significant advantages of this relatively simple methodology is its capability to assess bolt tension without any contact with the bolt, thus enabling measurement at inaccessible locations, multiple bolt measurement capability at a time, not requiring data collection during the installation and no calibration requirements. We performed detailed experiments on a custom-built flexible bench-top experimental setup consisting of 1018 steel plate of 12.7 mm (½ in thickness, a 6.4 mm (¼ in grade 8 bolt and a stainless steel washer with 19 mm (¾ in of external diameter. Our results indicate that this method is not only capable of clearly distinguishing properly bolted joints from loosened joints but also capable of quantifying how loose the bolt actually is. We also conducted detailed signal-to-noise (SNR analysis and showed that the SNR value for the entire bolt tension range was sufficient for image reconstruction.

  11. Let’s not forget the critical role of surface tension in xylem water relations

    Science.gov (United States)

    Jean-Christophe Domec

    2011-01-01

    The widely supported cohesion–tension theory of water transport explains the importance of a continuous water column and the mechanism of long-distance ascent of sap in plants (Dixon 1914, Tyree 2003, Angeles et al. 2004). The evaporation of water from the surfaces of mesophyll cells causes the air–water interface to retreat into the cellulose matrix of the plant cell...

  12. The effects of surface tension on flooding in counter-current two-phase flow in an inclined tube

    Energy Technology Data Exchange (ETDEWEB)

    Deendarlianto [Department of Mechanical and Industrial Engineering, Faculty of Engineering, Gadjah Mada University, Jalan Grafika No.2 Yogyakarta 55281 (Indonesia); Forschungszentrum Dresden-Rossendorf e.V., Institute of Safety Research, P.O. Box 510 119, D-01314 Dresden (Germany); Ousaka, Akiharu [Department of Mechanical Engineering, The University of Tokushima, 2-1 Minami Josanjima, Tokushima 770-8506 (Japan); Indarto [Department of Mechanical and Industrial Engineering, Faculty of Engineering, Gadjah Mada University, Jalan Grafika No.2 Yogyakarta 55281 (Indonesia); Kariyasaki, Akira [Department of Chemical Engineering, Fukuoka University, 8-19-1, Jyonan-ku, Fukuoka 814-0180 (Japan); Lucas, Dirk; Vallee, Christophe [Forschungszentrum Dresden-Rossendorf e.V., Institute of Safety Research, P.O. Box 510 119, D-01314 Dresden (Germany); Vierow, Karen; Hogan, Kevin [Department of Nuclear Engineering Texas A and M University, 129 Zachry Engineering Center, 3133 TAMU College Station, TX 77843-3133 (United States)

    2010-10-15

    The purpose of the present study is to investigate the effects of surface tension on flooding phenomena in counter-current two-phase flow in an inclined tube. Previous studies by other researchers have shown that surface tension has a stabilizing effect on the falling liquid film under certain conditions and a destabilizing or unclear trend under other conditions. Experimental results are reported herein for air-water systems in which a surfactant has been added to vary the liquid surface tension without altering other liquid properties. The flooding section is a tube of 16 mm in inner diameter and 1.1 m length, inclined at 30-60 from horizontal. The flooding mechanisms were observed by using two high-speed video cameras and by measuring the time variation of liquid hold-up along the test tube. The results show that effects of surface tension are significant. The gas velocity needed to induce flooding is lower for a lower surface tension. There was no upward motion of the air-water interfacial waves upon flooding occurrence, even for lower a surface tension. Observations on the liquid film behavior after flooding occurred suggest that the entrainment of liquid droplets plays an important role in the upward transport of liquid. Finally, an empirical correlation for flooding velocities is proposed that includes functional dependencies on surface tension and tube inclination. (author)

  13. Modeling of ultrasound contrast agents bubble dynamics with modified surface tension coefficient

    Institute of Scientific and Technical Information of China (English)

    ZHENG LuJie; TU Juan; CHEN WeiZhong

    2009-01-01

    The current work proposes a model describing the dynamics of coated microbubbles, which simplifies the traditional three-layer model to a two-layer one by introducing a visco-elastic interface with variable surface tension coefficients to connect the gas zone and the liquid zone. In the modified model, the traditional two interfaces boundary conditions are combined into one to simplify the description of the bubble. Moreover, the surface tension coefficient is defined as a function of bubble radius with lower and upper limits, which are related to the buckling and rupture mechanisms of the bubble. Further discussion is made regarding the effects resulting from the change of the surface tension coefficient on bubble dynamics. The dynamic responses of Optison and Sonozoid microbubbles, measured experimentally based on light scattering technology (adapted from previously published work), are simulated using both classic three-layer models (e.g. Church's model) and simplified model. The resuits show that our simplified model works as well as the Church's model.

  14. Well-posedness for the Classical Stefan Problem and the Zero Surface Tension Limit

    Science.gov (United States)

    Hadžić, Mahir; Shkoller, Steve

    2016-11-01

    We develop a framework for a unified treatment of well-posedness for the Stefan problem with or without surface tension. In the absence of surface tension, we establish well-posedness in Sobolev spaces for the classical Stefan problem. We introduce a new velocity variable which extends the velocity of the moving free-boundary into the interior domain. The equation satisfied by this velocity is used for the analysis in place of the heat equation satisfied by the temperature. Solutions to the classical Stefan problem are then constructed as the limit of solutions to a carefully chosen sequence of approximations to the velocity equation, in which the moving free-boundary is regularized and the boundary condition is modified in a such a way as to preserve the basic nonlinear structure of the original problem. With our methodology, we simultaneously find the required stability condition for well-posedness and obtain new estimates for the regularity of the moving free-boundary. Finally, we prove that solutions of the Stefan problem with positive surface tension {σ} converge to solutions of the classical Stefan problem as {σ to 0}.

  15. On the modelling of semi-insulating GaAs including surface tension and bulk stresses

    Energy Technology Data Exchange (ETDEWEB)

    Dreyer, W.; Duderstadt, F.

    2004-07-01

    Necessary heat treatment of single crystal semi-insulating Gallium Arsenide (GaAs), which is deployed in micro- and opto- electronic devices, generate undesirable liquid precipitates in the solid phase. The appearance of precipitates is influenced by surface tension at the liquid/solid interface and deviatoric stresses in the solid. The central quantity for the description of the various aspects of phase transitions is the chemical potential, which can be additively decomposed into a chemical and a mechanical part. In particular the calculation of the mechanical part of the chemical potential is of crucial importance. We determine the chemical potential in the framework of the St. Venant-Kirchhoff law which gives an appropriate stress/strain relation for many solids in the small strain regime. We establish criteria, which allow the correct replacement of the St. Venant-Kirchhoff law by the simpler Hooke law. The main objectives of this study are: (i) We develop a thermo-mechanical model that describes diffusion and interface motion, which both are strongly influenced by surface tension effects and deviatoric stresses. (ii) We give an overview and outlook on problems that can be posed and solved within the framework of the model. (iii) We calculate non-standard phase diagrams, i.e. those that take into account surface tension and non-deviatoric stresses, for GaAs above 786 C, and we compare the results with classical phase diagrams without these phenomena. (orig.)

  16. Curvature-dependence of the liquid-vapor surface tension beyond the Tolman approximation

    CERN Document Server

    Bruot, Nicolas

    2016-01-01

    Surface tension is a macroscopic manifestation of the cohesion of matter, and its value $\\sigma_\\infty$ is readily measured for a flat liquid-vapor interface. For interfaces with a small radius of curvature $R$, the surface tension might differ from $\\sigma_\\infty$. The Tolman equation, $\\sigma(R) = \\sigma_\\infty / (1 + 2 \\delta/R)$, with $\\delta$ a constant length, is commonly used to describe nanoscale phenomena such as nucleation. Here we report experiments on nucleation of bubbles in ethanol and n-heptane, and their analysis in combination with their counterparts for the nucleation of droplets in supersaturated vapors, and with water data. We show that neither a constant surface tension nor the Tolman equation can consistently describe the data. We also investigate a model including $1/R$ and $1/R^2$ terms in $\\sigma(R)$. We describe a general procedure to obtain the coefficients of these terms from detailed nucleation experiments. This work explains the conflicting values obtained for the Tolman length i...

  17. Two Surface-Tension Formulations For The Level Set Interface-Tracking Method

    Energy Technology Data Exchange (ETDEWEB)

    Shepel, S.V.; Smith, B.L

    2005-03-01

    The paper describes a comparative study of two surface-tension models for the Level Set interface tracking method. In both models, the surface tension is represented as a body force, concentrated near the interface, but the technical implementation of the two options is different. The first is based on a traditional Level Set approach, in which the surface tension is distributed over a narrow band around the interface using a smoothed Delta function. In the second model, which is based on the integral form of the fluid-flow equations, the force is imposed only in those computational cells through which the interface passes. Both models have been incorporated into the Finite-Element/Finite-Volume Level Set method, previously implemented into the commercial Computational Fluid Dynamics (CFD) code CFX-4. A critical evaluation of the two models, undertaken in the context of four standard Level Set benchmark problems, shows that the first model, based on the smoothed Delta function approach, is the more general, and more robust, of the two. (author)

  18. The roles of wettability and surface tension in droplet formation during inkjet printing.

    Science.gov (United States)

    He, Bing; Yang, Sucui; Qin, Zhangrong; Wen, Binghai; Zhang, Chaoying

    2017-09-19

    This paper describes a lattice Boltzmann-based binary fluid model for inkjet printing. In this model, a time-dependent driving force is applied to actuate the droplet ejection. As a result, the actuation can be accurately controlled by adjusting the intensity and duration of the positive and negative forces, as well as the idle time. The present model was verified by reproducing the actual single droplet ejection process captured by fast imaging. This model was subsequently used to investigate droplet formation in piezoelectric inkjet printing. It was determined that the wettability of the nozzle inner wall and the surface tension of the ink are vital factors controlling the print quality and speed. Increasing the contact angle of the nozzle inner delays the droplet breakup time and reduces the droplet velocity. In contrast, higher surface tension values promote earlier droplet breakup and faster drop velocity. These results indicate that the hydrophilic modification of the nozzle inner wall and the choice of inks with high surface tensions will improve printing quality.

  19. Surface Tension and Lamellar Spacing in Polyelectrolyte Blends and Block Copolymers

    Science.gov (United States)

    Sing, Charles; Olvera de La Cruz, Monica

    2015-03-01

    Heterogeneous polymer systems such as block copolymers (BCPs) are governed primarily by a competition between the surface tension between different chemical species and the entropic stretching of the polymer chains. Charged BCPs represent a class of materials that is currently of great interest to the polymer community due to the promise of charged BCPs as nanostructured membranes for batteries and fuel cells. The inclusion of charge presents a powerful way to tune the structure of BCPs, and we develop our understanding of how to do so by investigating the interfacial properties (surface tension and microstructure size) of polyelectrolyte blends and block copolymers. We use a new method that combines the features of liquid state (LS) theory and self consistent field theory (SCFT) into a multiscale LS-SCFT theory that provides beyond-mean-field predictions of polyelectrolyte systems. We find that charge size, charge correlations, and the fraction of charged monomers plays a crucial role in determining surface tension, and we therefore demonstrate how BCP structure changes upon inclusion of charges. Finally, we will show that these predictions provide the ideal basis for comparison to experiment and subsequent refinement of LS-SCFT theory.

  20. Free vibration, wave propagation and tension analyses of a sandwich micro/nano rod subjected to electric potential using strain gradient theory

    Science.gov (United States)

    Arefi, Mohammad; Zenkour, Ashraf M.

    2016-11-01

    Strain gradient theory is used to study free vibration, wave propagation and tension analyses of a sandwich micro/nano rod made of piezoelectric materials under electric potential. The structure is resting on a Pasternak’s foundation medium. Love’s rod model is used for derivation of displacement field. The piezoelectric face sheets are subjected to two-dimensional electric potential including an applied voltage at top of plate and a cosine term along the thickness direction. Hamilton’s principle is used to derive governing equations of motion in terms of axial displacement and electric potential. Three distinct behaviors of the present problem including free vibration, wave propagation and tension analyses are performed. Some important numerical results are presented in detail to capture the effect of materials length scales and applied voltage on the different behaviors of microrod.

  1. The interfacial surface tension of a quark-gluon plasma fireball in a hadronic medium

    Indian Academy of Sciences (India)

    R Ramanathan; K K Gupta; Agam K Jha; S S Singh

    2007-05-01

    We calculate the interfacial surface tension of a QGP-fireball in a hadronic medium in the Ramanathan et al statistical model. The constancy of the ratio of the surface tension with the cube of the critical transition temperature is in overall accordance with lattice QCD findings. It is in complete agreement with a recent MIT bag model calculation of surface tension. The velocity of sound in the QGP droplet is predicted to be in the range (0.27 ± 0.02) times the velocity of light in vacuum and this value is independent of both the value of the transition temperature and the model parameters.

  2. Surface Tension and Negative Pressure Interior of a Non-Singular `Black Hole'

    CERN Document Server

    Mazur, Pawel O

    2015-01-01

    The constant density interior Schwarzschild solution for a static, spherically symmetric collapsed star has a divergent pressure when its radius $R\\le\\frac{9}{8}R_s=\\frac{9}{4}GM$. We show that this divergence is integrable, and induces a non-isotropic transverse stress with a finite redshifted surface tension on a spherical surface of radius $R_0=3R\\sqrt{1-\\frac{8}{9}\\frac{R}{R_s}}$. For $r < R_0$ the interior Schwarzschild solution exhibits negative pressure. When $R=R_s$, the surface is localized at the Schwarzschild radius itself, $R_0=R_s$, and the solution has constant negative pressure $p =-\\bar\\rho$ everywhere in the interior $rsurface tension of the condensate star surface is given by $\\tau_s=\\Delta\\kappa/8\\pi G$, where $\\Delta\\kappa=\\kappa_+-\\kappa_-=2\\kappa_+=1/R_s$ is the difference of equal and opposite surface grav...

  3. The anisotropy of the surface tension at the magnetic-field-induced phase transformations

    CERN Document Server

    Cebers, A

    2002-01-01

    The surface properties of the magnetic colloid phases arising at the magnetic-field-induced phase separation in the Hele-Shaw cell are considered. By the numerical resolution of the equation for the concentration distribution in the transition layer between the phases, the anisotropy of the surface tension is calculated. The anisotropic shapes of the droplets of the concentrated phase are found by the Wulff construction and are compared with that obtained by the numerical simulation of the kinetics of the magnetic colloid phase separation in the Hele-Shaw cell.

  4. Interfacial layers from the protein HFBII hydrophobin: dynamic surface tension, dilatational elasticity and relaxation times.

    Science.gov (United States)

    Alexandrov, Nikola A; Marinova, Krastanka G; Gurkov, Theodor D; Danov, Krassimir D; Kralchevsky, Peter A; Stoyanov, Simeon D; Blijdenstein, Theodorus B J; Arnaudov, Luben N; Pelan, Eddie G; Lips, Alex

    2012-06-15

    The pendant-drop method (with drop-shape analysis) and Langmuir trough are applied to investigate the characteristic relaxation times and elasticity of interfacial layers from the protein HFBII hydrophobin. Such layers undergo a transition from fluid to elastic solid films. The transition is detected as an increase in the error of the fit of the pendant-drop profile by means of the Laplace equation of capillarity. The relaxation of surface tension after interfacial expansion follows an exponential-decay law, which indicates adsorption kinetics under barrier control. The experimental data for the relaxation time suggest that the adsorption rate is determined by the balance of two opposing factors: (i) the barrier to detachment of protein molecules from bulk aggregates and (ii) the attraction of the detached molecules by the adsorption layer due to the hydrophobic surface force. The hydrophobic attraction can explain why a greater surface coverage leads to a faster adsorption. The relaxation of surface tension after interfacial compression follows a different, square-root law. Such behavior can be attributed to surface diffusion of adsorbed protein molecules that are condensing at the periphery of interfacial protein aggregates. The surface dilatational elasticity, E, is determined in experiments on quick expansion or compression of the interfacial protein layers. At lower surface pressures (<11 mN/m) the experiments on expansion, compression and oscillations give close values of E that are increasing with the rise of surface pressure. At higher surface pressures, E exhibits the opposite tendency and the data are scattered. The latter behavior can be explained with a two-dimensional condensation of adsorbed protein molecules at the higher surface pressures. The results could be important for the understanding and control of dynamic processes in foams and emulsions stabilized by hydrophobins, as well as for the modification of solid surfaces by adsorption of such

  5. Spontaneous Pattern Formation Induced by Bénard-Marangoni Convection for Sol-Gel-Derived Titania Dip-Coating Films: Effect of Co-solvents with a High Surface Tension and Low Volatility.

    Science.gov (United States)

    Uchiyama, Hiroaki; Matsui, Tadayuki; Kozuka, Hiromitsu

    2015-11-17

    Evaporation-driven surface tension gradient in the liquid layer often causes the convective flow, i.e., Bénard-Marangoni convection, resulting in the formation of cell-like patterns on the surface. Here, we prepared sol-gel-derived titania films from Ti(OC3H7(i))4 solutions by dip coating and discussed the effect of the addition of co-solvents with a high surface tension and low volatility on the spontaneous pattern formation induced by Bénard-Marangoni convection. Propylene glycol (PG, with a surface tension of 38.6 mN m(-1)) and dipropylene glycol (DPG, with a surface tension of 33.9 mN m(-1)) were added to the coating solutions containing 2-propanol (2-Pr, with a surface tension of 22.9 mN m(-1)) for controlling the evaporation-driven surface tension gradient in the coating layer on a substrate. During dip coating at a substrate withdrawal speed of 50 cm min(-1) in a thermostatic oven at 60 °C, linearly arranged cell-like patterns on a micrometer scale were spontaneously formed on the titania gel films, irrespective of the composition of coating solutions. Such surface patterns remained even after the heat treatment at 200 and 600 °C, where the densification and crystallization of the titania films progressed. The width and height of the cell-like patterns increased with increasing PG and DPG contents in the coating solutions, where the addition of PG resulted in the formation of cells with a larger height than DPG.

  6. Effects of Ce concentrations on ignition temperature and surface tension of Mg-9wt.%Al alloy

    Directory of Open Access Journals (Sweden)

    Deng Zhenghua

    2013-03-01

    Full Text Available Magnesium alloys are well known for their excellent properties, but the potential issues with oxidation and burning during melting and casting largely limit its industrial applications. The addition of Ce in magnesium alloys can significantly raise ignition-proof performance and change the structure of the oxide film on the surface of the molten metal as well as the surface tension values. Surface tension is an important physical parameter of the metal melts, and it plays an important role in the formation of surface oxide film. In this present work, the ignition temperature and the surface tension of Mg-9wt.%Al alloy with different Ce concentrations were studied. Surface tensions was measured using the maximum bubble pressure method (MBPM. Ignition temperature was measured using NiCr-NiSi type thermocouples and was monitored and recorded via a WXT-604 desk recording device. The results show that the ignition point of Mg-9wt.%Al alloy can be effectively elevated by adding Ce. The ignition temperature reaches its highest point of 720 ℃ when the addition of Ce is 1wt.%. The surface tension of the molten Mg-9wt.%Al alloy decreases exponentially with the increase of Ce addition at the same temperature. Similarly, the experiment also shows that the surface tension of Mg-9wt.%Al alloy decreases exponentially with the increase of temperature.

  7. Stability and Surface Topography Evolution in Nanoimprinted Polymer Patterns under a Thermal Gradient

    Energy Technology Data Exchange (ETDEWEB)

    Ding, Yifu; Qi, Jerry H.; Alvine, Kyle J.; Ro, Hyun W.; Ahn, Dae Up; Lin-Gibson, Sheng; Douglas, Jack F.; Soles, Christopher L.

    2010-09-06

    Nanostructures created in polymer films by nanoimprint lithography are subject to large stresses, both those from the imprinting processes as well as stresses arising from the intrinsic thermodynamic instabilities. These stresses can induce nanostructure deformation that can compromise the intended function of the imprinted pattern. Controlling these stresses, and thus the stability of the imprinted patterns, is a key scientific issue for this technology. The requirement of film stability against dewetting requires the use of entangled polymer films, which necessitates an understanding of complex viscoelastic response of these materials to large stresses. Here we investigate the evolution of the surface topography of nanoimprinted patterns in polystyrene films through a high throughput annealing approach in which the patterns are annealed for a fixed time on a controlled temperature gradient. Using principles of time-temperature superposition we systematically explore the effect of varying basic system variables such as pattern feature size, polymer molecular mass, imprinting temperature, on nanopattern stability and on the evolution of imprinted patterns driven by surface tension and internal stress. Nanostructure collapse generally occurs through a combination of a "slumping" instability, where the imprinted film simply relaxes towards a planar film and the film height decreases with time, and a lateral "zigzag" instability in the nanoimprinted lines.

  8. Reactive processing of formaldehyde and acetaldehyde in aqueous aerosol mimics: surface tension depression and secondary organic products

    Directory of Open Access Journals (Sweden)

    Z. Li

    2011-11-01

    Full Text Available The reactive uptake of carbonyl-containing volatile organic compounds (cVOCs by aqueous atmospheric aerosols is a likely source of particulate organic material. The aqueous-phase secondary organic products of some cVOCs are surface-active. Therefore, cVOC uptake can lead to organic film formation at the gas-aerosol interface and changes in aerosol surface tension. We examined the chemical reactions of two abundant cVOCs, formaldehyde and acetaldehyde, in water and aqueous ammonium sulfate (AS solutions mimicking tropospheric aerosols. Secondary organic products were identified using Aerosol Chemical Ionization Mass Spectrometry (Aerosol-CIMS, and changes in surface tension were monitored using pendant drop tensiometry. Hemiacetal oligomers and aldol condensation products were identified using Aerosol-CIMS. Acetaldehyde depresses surface tension to 65(±2 dyn cm−1 in pure water (a 10% surface tension reduction from that of pure water and 62(±1 dyn cm−1 in AS solutions (a 20.6% reduction from that of a 3.1 M AS solution. Surface tension depression by formaldehyde in pure water is negligible; in AS solutions, a 9% reduction in surface tension is observed. Mixtures of these species were also studied in combination with methylglyoxal in order to evaluate the influence of cross-reactions on surface tension depression and product formation in these systems. We find that surface tension depression in the solutions containing mixed cVOCs exceeds that predicted by an additive model based on the single-species isotherms.

  9. Model HULIS compounds in nanoaerosol clusters - investigations of surface tension and aggregate formation using molecular dynamics simulations

    National Research Council Canada - National Science Library

    T. Hede; X. Li; C. Leck; Y. Tu; H. Ågren

    2011-01-01

    .... In this study we use molecular dynamics simulations to show that model humic-like substances (HULIS) in systems containing 10 000 water molecules mimic experimental data well referring to reduction of surface tension...

  10. Surface tension of a coal extract in an organic solvent; Sekitan chushutsu seibun no kaigo to hyomen choryoku

    Energy Technology Data Exchange (ETDEWEB)

    Kikuchi, T.; Hayasaka, K.; Takanohashi, T.; Iino, M. [Tohoku University, Sendai (Japan). Institute for Chemical Reaction Science

    1996-10-28

    The behavior and properties of associated bodies were studied through measurement of surface tension considering acetone-soluble fraction relatively light among various solvent extracts of coal. In experiment, the acetone-soluble fraction was extracted from the substances extracted from Upper Freeport coal as standard specimen using the mixed solvent of carbon disulfide (CS2) and N-methyl-2-pyrrolidinone (NMP), and it was dissolved into NMP after drying. Surface tension was measured by Wilhelmy method. The experimental results are as follows. Equilibrium surface tension is equal to the surface tension of pure solvent in a low concentration range of solution, and decreases with an increase in concentration approaching a fixed value at 0 in log concentration, nearly showing an S curve. Adsorption of species with non-polar aromatic ring of the acetone-soluble fraction on a solution surface probably decreases surface tension. Change with time in surface tension is observed which suggests fast initial reaction and slow subsequent reaction. 4 figs.

  11. Effect of surface modification on interfacial nanobubble morphology and contact line tension.

    Science.gov (United States)

    Rangharajan, Kaushik K; Kwak, Kwang J; Conlisk, A T; Wu, Yan; Prakash, Shaurya

    2015-07-14

    Past research has confirmed the existence of surface nanobubbles on various hydrophobic substrates (static contact angle >90°) when imaged in air-equilibrated water. Additionally, the use of solvent exchange techniques (based on the difference in saturation levels of air in various solvents) also introduced surface nanobubbles on hydrophilic substrates (static contact angle static contact angle of 81.1°), bromo-terminated silica (BTS; static contact angle of 85.5°), and fluoro-terminated silica (FTS; static contact angle of 105.3°) surfaces when immersed in air-equilibrated water without solvent exchange. Nanobubbles formed on the above three substrates were characterized on the basis of Laplace pressure, bubble density, and contact line tension. Results reported here show that (1) the Laplace pressures of all nanobubbles formed on both BTS and polycarbonate were an order of magnitude higher than those of FTS, (2) the nanobubble number density per unit area decreased with an increase in substrate contact angle, and (3) the contact line tension of the nanobubbles was calculated to be positive for both BTS and polycarbonate (lateral radius, Rs 50 nm for all nanobubbles). The nanobubble morphology and distribution before and after using the solvent exchange method (ethanol-water), on the bulk polycarbonate substrate was also characterized. Analysis for these polycarbonate surface nanobubbles showed that both the Laplace pressure and nanobubble density reduced by ≈98% after ethanol-water exchange, accompanied by a flip in the magnitude of contact line tension from positive (0.19 nN) to negative (-0.11 nN).

  12. Online measurements of surface tensions and viscosities based on the hydrodynamics of Taylor flow in a microchannel

    Science.gov (United States)

    Sun, Yanhong; Guo, Chaohong; Jiang, Yuyan; Wang, Tao; Zhang, Lei

    2016-11-01

    This paper demonstrates an online measurement technique which can measure both surface tension and viscosity for confined fluids in microfluidic systems. The surface tension and viscosity are determined by monitoring the liquid film thickness deposited in a microchannel based on the hydrodynamics of Taylor flow. Measurements were carried out for pure liquids and binary aqueous liquid mixtures. The results agreed well with reference data and theoretical models. This novel method has considerable potential for measuring dynamic interfacial tension of complex mixtures. Furthermore, it offers opportunity for integrating property measurement with two-phase flow in microchannel, opening new lines of applications.

  13. Simultaneous measurement of contact angle and surface tension using axisymmetric drop-shape analysis-no apex (ADSA-NA).

    Science.gov (United States)

    Kalantarian, A; David, R; Chen, J; Neumann, A W

    2011-04-05

    Axisymmetric drop-shape analysis-no apex (ADSA-NA) is a recent drop-shape method that allows the simultaneous measurement of contact angles and surface tensions of drop configurations without an apex (i.e., a sessile drop with a capillary protruding into the drop). Although ADSA-NA significantly enhanced the accuracy of contact angle and surface tension measurements compared to that of original ADSA using a drop with an apex, it is still not as accurate as a surface tension measurement using a pendant drop suspended from a holder. In this article, the computational and experimental aspects of ADSA-NA were scrutinized to improve the accuracy of the simultaneous measurement of surface tensions and contact angles. It was found that the results are relatively insensitive to different optimization methods and edge detectors. The precision of contact angle measurement was enhanced by improving the location of the contact points of the liquid meniscus with the solid substrate to subpixel resolution. To optimize the experimental design, the capillary was replaced with an inverted sharp-edged pedestal, or holder, to control the drop height and to ensure the axisymmetry of the drops. It was shown that the drop height is the most important experimental parameter affecting the accuracy of the surface tension measurement, and larger drop heights yield lower surface tension errors. It is suggested that a minimum nondimensional drop height (drop height divided by capillary length) of 1.7 is required to reach an error of less than 0.2 mJ/m(2) for the measured surface tension. As an example, the surface tension of water was measured to be 72.46 ± 0.04 at 24 °C by ADSA-NA, compared to 72.39 ± 0.01 mJ/m(2) obtained with pendant drop experiments.

  14. Heat Transfer in a Liquid-Solid Circulating Fluidized Bed Reactor with Low Surface Tension Media

    Institute of Scientific and Technical Information of China (English)

    HR Jin; H Lim; DH Lim; Y Kang; Ki-Won Jun

    2013-01-01

    Heat transfer characteristics between the immersed heater and the bed content were studied in the riser of a liquid-solid circulating fluidized bed, whose diameter and height were 0.102 m (ID) and 2.5 m, respectively. Effects of liquid velocity, particle size, surface tension of liquid phase and solid circulation rate on the overall heat transfer coefficient were examined. The heat transfer coefficient increased with increasing particle size or solid cir-culation rate due to the higher potential of particles to contact with the heater surface and promote turbulence near the heater surface. The value of heat transfer coefficient increased gradually with increase in the surface tension of liquid phase, due to the slight increase of solid holdup. The heat transfer coefficient increased with the liquid veloc-ity even in the higher range, due to the solid circulation prevented the decrease in solid holdup, in contrast to that in the conventional liquid-solid fluidized beds. The values of heat transfer coefficient were well correlated in terms of dimensionless groups as well as operating variables.

  15. Some remarks on the solid surface tension determination from contact angle measurements

    Science.gov (United States)

    Zdziennicka, Anna; Szymczyk, Katarzyna; Krawczyk, Joanna; Jańczuk, Bronisław

    2017-05-01

    The measurements of water, formamide and diiodomethane contact angle (θ) on polytetrafluoroethylene (PTFE), polyethylene (PE), polymethyl methacrylate (PMMA), nylon 6, quartz and silica were performed. Based on the θ values of these liquids obtained on PTFE, the Lifshitz-van der Waals and acid-base and/or dispersion and polar components of their surface tension (ST) were determined. In turn, the θ values for water, formamide and diiodomethane on PMMA were applied to calculate the electron-acceptor and electron-donor parameters of the Lewis acid-base component of the formamide ST. For this calculation the same values of the electron-acceptor and electron-donor parameters for water ST were used. Taking into account the values of components and parameters of water, formamide and diiodomethane ST obtained by us, van Oss et al. and from the water(formamide)-n-alkane and water-diiodomethane interface tension, the components and parameters of studied solids ST were calculated. To this end different approaches to the interface tension were considered. The obtained values were compared with those in the literature. It was concluded that for determination of solid ST components and parameters, those of water, formamide and diiodomethane ST obtained from the θ measurements on the model solids should be used.

  16. Complex polymer brush gradients based on nanolithography and surface-initiated polymerization.

    Science.gov (United States)

    Lin, Xiankun; He, Qiang; Li, Junbai

    2012-05-07

    Confined surface gradients consisting of polymer brushes have great potential in various applications such as microfluidic devices, sensors, and biophysical research. Among the available fabrication approaches, nanolithographies combined with self-assembled monolayers and surface-initiated polymerization have became powerful tools to engineer confined gradients or predefined complex gradients on the nanometre size. In this tutorial review, we mainly highlight the research progress of the fabrication of confined polymer brush gradients by using electron beam, laser, and probe-based nanolithographies and the physical base for these approaches. The application of these polymer brush gradients in biomedical research is also addressed.

  17. Short-Time Structural Stability of Compressible Vortex Sheets with Surface Tension

    Science.gov (United States)

    Stevens, Ben

    2016-11-01

    Assume we start with an initial vortex-sheet configuration which consists of two inviscid fluids with density bounded below flowing smoothly past each other, where a strictly positive fixed coefficient of surface tension produces a surface tension force across the common interface, balanced by the pressure jump. We model the fluids by the compressible Euler equations in three space dimensions with a very general equation of state relating the pressure, entropy and density such that the sound speed is positive. We prove that, for a short time, there exists a unique solution of the equations with the same structure. The mathematical approach consists of introducing a carefully chosen artificial viscosity-type regularisation which allows one to linearise the system so as to obtain a collection of transport equations for the entropy, pressure and curl together with a parabolic-type equation for the velocity which becomes fairly standard after rotating the velocity according to the interface normal. We prove a high order energy estimate for the non-linear equations that is independent of the artificial viscosity parameter which allows us to send it to zero. This approach loosely follows that introduced by Shkoller et al. in the setting of a compressible liquid-vacuum interface. Although already considered by Coutand et al. [10] and Lindblad [17], we also make some brief comments on the case of a compressible liquid-vacuum interface, which is obtained from the vortex sheets problem by replacing one of the fluids by vacuum, where it is possible to obtain a structural stability result even without surface tension.

  18. Effect of increased surface tension and assisted ventilation on /sup 99m/Tc-DTPA clearance

    Energy Technology Data Exchange (ETDEWEB)

    Jefferies, A.L.; Kawano, T.; Mori, S.; Burger, R.

    1988-02-01

    Experiments were performed to determine the effects of conventional mechanical ventilation (CMV) and high-frequency oscillation (HFO) on the clearance of technetium-99m-labeled diethylenetriamine pentaacetate (/sup 99m/Tc-DTPA) from lungs with altered surface tension properties. A submicronic aerosol of /sup 99m/Tc-DTPA was insufflated into the lungs of anesthetized, tracheotomized rabbits before and 1 h after the administration of the aerosolized detergent dioctyl sodium sulfosuccinate (OT). Rabbits were ventilated by one of four methods: 1) spontaneous breathing; 2) CMV at 12 cmH2O mean airway pressure (MAP); 3) HFO at 12 cmH2O MAP; 4) HFO at 16 cmH2O MAP. Administration of OT resulted in decreased arterial PO2 (PaO2), increased lung wet-to-dry weight ratios, and abnormal lung pressure-volume relationships, compatible with increased surface tension. /sup 99m/Tc-DTPA clearance was accelerated after OT in all groups. The post-OT rate of clearance (k) was significantly faster (P less than 0.05) in the CMV at 12 cmH2O MAP (k = 7.57 +/- 0.71%/min (SE)) and HFO at 16 cmH2O MAP (k = 6.92 +/- 0.61%/min) groups than in the spontaneously breathing (k = 4.32 +/- 0.55%/min) and HFO at 12 cmH2O MAP (4.68 +/- 0.63%/min) groups. The clearance curves were biexponential in the former two groups. We conclude that pulmonary clearance of /sup 99m/Tc-DTPA is accelerated in high surface tension pulmonary edema, and this effect is enhanced by both conventional ventilation and HFO at high mean airway pressure.

  19. Measurement and Modeling of Surface Tensions of Asymmetric Systems: Heptane, Eicosane, Docosane, Tetracosane and their Mixtures

    DEFF Research Database (Denmark)

    Queimada, Antonio; Silva, Filipa A. E.; Caco, Ana I.;

    2003-01-01

    To extend the surface tension database for heavy or asymmetric n-alkane mixtures, measurements were performed using the Wilhelmy plate method. Measured systems included the binary mixtures heptane + eicosane, heptane + docosane and heptane + tetracosane and the ternary mixture heptane + eicosane...... was assessed. It is shown that using a new generalized combining rule for the critical temperature, the data can be described with deviations of about 1% that is within the experimental uncertainty of the measurements. (C) 2003 Elsevier B.V. All rights reserved....

  20. A new experimental method for determining liquid density and surface tension

    Science.gov (United States)

    Chou, Kjo-Chih; Hu, Jian-Hong

    1991-02-01

    A summary concerning the measurement of liquid density relying on the Archimedes principle has been presented, based on which a new effective method with a specially designed bob for determining liquid density has been suggested. The application of this method to ethyl alcohol solution and liquid glycerol, as well as a theoretical error analysis, shows that this new method is significant, because not only can it simplify the procedure of measurement but it can also offer more precise results. Besides, this method can further provide surface tension or contact angle simultaneously. It is expected that this new method will find its application in hightemperature melts.

  1. The Dynamic Role of Melt-Vapor Surface Tension in Magmatic Degassing

    Science.gov (United States)

    Mangan, M.; Sisson, T.

    2004-05-01

    It is well known from classical nucleation theory that melt-vapor surface tension (σ ) critically influences both the supersaturation pressure needed to initiate eruptive degassing (Δ Pcritical) and the rate of gas bubble nucleation (J ). Here we highlight an important aspect of melt-vapor surface tension that is generally ignored, namely, that σ is dynamic quantity responsive to the changes in melt composition, water content, and temperature that occur during magma storage and ascent. Crystallization, degassing, and cooling impart a time-dependency to σ that must be considered in any effort to accurately model eruption processes. In this study, we document changes to σ in natural, water-saturated dacitic melt at 200 MPa and 950-1055° C and 5.7-4.8 wt% H2O. Rather than traditional macroscopic measurements (sessile drop, capillarity, detachment techniques), we experimentally determine the Δ Pcritical of bubble nucleation during depressurization from 200 MPa as a function of T and wt% H2O (techniques as in Mangan and Sisson, E&PSL, 2000), and then solve for σ at those conditions using classical nucleation theory (Blander and Katz, AIChE Jour., 1975). Meshing experiment and theory gives σ = 42 (±3), 60 (±7), 73 (±3) mN/m at T= 950, 1000, 1055° C, and H2O = 5.7 (±0.1), 5.3 (±0.2), 4.8 (±0.1) wt%, respectively. Our data show a negative dependence of σ on dissolved water content of -33 mN/m/wt% H2O and a positive dependence of σ on temperature of +0.30 mN/m/° C. Comparable relationships between σ and changing water content and temperature were obtained in sessile-drop style experiments using hydrous haplogranite melts (Bagdassarov et al., Amer. Mineral., 2000). To illustrate how the observed σ -H2O-T dependencies might impact degassing models we consider two idealized regimes. The first is a storage regime in which isobaric cooling and crystallization in the magma chamber gradually increases the H2O content of the residual melt. Surface tension is

  2. Effects of surface tension and electrochemical reactions in Li-ion battery electrode nanoparticles

    Science.gov (United States)

    Stein, Peter; Zhao, Ying; Xu, Bai-Xiang

    2016-11-01

    The size- and shape-dependency of the chemo-mechanical behavior of spherical and ellipsoidal nanoparticles in Li-ion battery electrodes are investigated by a stress-assisted diffusion model and 3D finite element simulations. The model features surface tension, a direct coupling between diffusion and elasticity, concentration-dependent diffusivity, and a Butler-Volmer relation for the description of electrochemical reactions that is modified to account for mechanical effects. Simulation results on spherical particles reveal that surface tension causes additional pressure fields in the particles, shifting the stress state towards the compressive regime. This provides mechanical stabilization, allowing, in principle, for higher charge/discharge rates. However, due to this pressure the attainable lithiation for a given potential difference is reduced during insertion, whereas a higher amount of ions is given off during extraction. Ellipsoidal particles with an aspect ratio deviating from that of a sphere with the same volume expose a larger surface area to the intercalation reactions. Consequently, they exhibit accelerated (dis)charge rates. However, due to the enhanced pressure in regions with high curvature, the accessible capacity of ellipsoidal particles is less than that of spherical particles.

  3. Surface tension effects on the onset of double-diffusive convection

    Science.gov (United States)

    Chen, C. F.

    Experiments have been carried out to determine the critical thermal Rayleigh number for onset of convection in a horizontal layer of density-stratified fluid with a free surface when heated from below. Three different aqueous solutions were used: salt, glycerol, and acetic acid. The rates of change in surface tension with concentration for these three solutions are positive, nearly zero, and negative, respectively. Compared to the rigid-rigid boundaries, the critical thermal Rayleigh number was found to be larger by 11.2 percent for the salt solution and smaller by 10.0 percent for the glycerol solution. With the acetic acid solution, however, the effect of the free surface was found to be negligible.

  4. Surface tension, viscosity, and rheology of water-based nanofluids: a microscopic interpretation on the molecular level

    Science.gov (United States)

    Lu, Gui; Duan, Yuan-Yuan; Wang, Xiao-Dong

    2014-09-01

    Nanofluids are suspensions of nanometer-sized particles which significantly modify the properties of the base fluids. Nanofluids exhibit attractive properties, such as high thermal conductivity, tunable surface tension, viscosity, and rheology. Various attempts have been made to understand the mechanisms for these property modifications caused by adding nanoparticles; however, due to the lack of direct nanoscale evidence, these explanations are still controversial. This work calculated the surface tension, viscosity, and rheology of gold-water nanofluids using molecular dynamics simulations which provide a microscopic interpretation for the modified properties on the molecular level. The gold-water interaction potential parameters were changed to mimic various nanoparticle types. The results show that the nanoparticle wettability is responsible for the modified surface tension. Hydrophobic nanoparticles always tend to stay on the free surface so they behave like a surfactant to reduce the surface tension. Hydrophilic nanoparticles immersed into the bulk fluid impose strong attractive forces on the water molecules at the free surface which reduces the free surface thickness and increases the surface tension of the nanofluid. Solid-like absorbed water layers were observed around the nanoparticles which increase the equivalent nanoparticle radius and reduce the mobility of the nanoparticles within the base fluid which increases the nanofluid viscosity. The results show the water molecule solidification between two or many nanoparticles at high nanoparticle loadings, but the solidification effect is suppressed for shear rates greater than a critical shear rate; thus Newtonian nanofluids can present shear-thinning non-Newtonian behavior.

  5. Oxygen Tension and Riboflavin Gradients Cooperatively Regulate the Migration of Shewanella oneidensis MR-1 Revealed by a Hydrogel-Based Microfluidic Device

    Science.gov (United States)

    Kim, Beum Jun; Chu, Injun; Jusuf, Sebastian; Kuo, Tiffany; TerAvest, Michaela A.; Angenent, Largus T.; Wu, Mingming

    2016-01-01

    Shewanella oneidensis is a model bacterial strain for studies of bioelectrochemical systems (BESs). It has two extracellular electron transfer pathways: (1) shuttling electrons via an excreted mediator riboflavin; and (2) direct contact between the c-type cytochromes at the cell membrane and the electrode. Despite the extensive use of S. oneidensis in BESs such as microbial fuel cells and biosensors, many basic microbiology questions about S. oneidensis in the context of BES remain unanswered. Here, we present studies of motility and chemotaxis of S. oneidensis under well controlled concentration gradients of two electron acceptors, oxygen and oxidized form of riboflavin (flavin+), using a newly developed microfluidic platform. Experimental results demonstrate that either oxygen or flavin+ is a chemoattractant to S. oneidensis. The chemotactic tendency of S. oneidensis in a flavin+ concentration gradient is significantly enhanced in an anaerobic in contrast to an aerobic condition. Furthermore, either a low oxygen tension or a high flavin+ concentration considerably enhances the speed of S. oneidensis. This work presents a robust microfluidic platform for generating oxygen and/or flavin+ gradients in an aqueous environment, and demonstrates that two important electron acceptors, oxygen and oxidized riboflavin, cooperatively regulate S. oneidensis migration patterns. The microfluidic tools presented as well as the knowledge gained in this work can be used to guide the future design of BESs for efficient electron production. PMID:27703448

  6. Oxygen tension and riboflavin gradients cooperatively regulate the migration of Shewanella oneidensis MR-1 revealed by a hydrogel-based microfluidic device

    Directory of Open Access Journals (Sweden)

    Beum Jun Kim

    2016-09-01

    Full Text Available Shewanella oneidensis (S. oneidensis is a model bacterial strain for studies of bioelectrochemical systems (BESs. It has two extracellular electron transfer pathways: 1 shuttling electrons via an excreted mediator riboflavin; and 2 direct contact between the c-type cytochromes at the cell membrane and the electrode. Despite the extensive use of S. oneidensis in bioelectrochemical systems such as microbial fuel cells and biosensors, many basic microbiology questions about S. oneidensis in the context of BES remain unanswered. Here, we present studies of motility and chemotaxis of S. oneidensis under well controlled concentration gradients of two electron acceptors, oxygen and oxidized form of riboflavin (flavin+ using a newly developed microfluidic platform. Experimental results demonstrate that either oxygen or flavin+ is a chemoattractant to S. oneidensis. The chemotactic tendency of S. oneidensis in a flavin+ concentration gradient is significantly enhanced in an anaerobic in contrast to an aerobic condition. Furthermore, either a low oxygen tension or a high flavin+ concentration considerably enhances the speed of S. oneidensis. This work presents a robust microfluidic platform for generating oxygen and/or flavin+ gradients in an aqueous environment, and demonstrates that two important electron acceptors, oxygen and oxidized riboflavin, cooperatively regulate S. oneidensis migration patterns. The microfluidic tools presented as well as the knowledge gained in this work can be used to guide the future design of BESs for efficient electron production.

  7. Complex Surface Concentration Gradients by Stenciled "Electro Click Chemistry"

    DEFF Research Database (Denmark)

    Hansen, Thomas Steen; Lind, Johan Ulrik; Daugaard, Anders Egede;

    2010-01-01

    Complex one- or two-dimensional concentration gradients of alkynated molecules are produced on azidized conducting polymer substrates by stenciled "electro click chemistry". The latter describes the local electrochemical generation of catalytically active Cu(I) required to complete a "click...... active ligands including cell binding peptides are patterned in gradients by this method without losing their biological function or the conductivity of the polymer....

  8. Empirical correlation of the surface tension versus the viscosity for saturated normal liquids

    CERN Document Server

    Li, Xia; Mulero, A

    2016-01-01

    In 1966 Pelofsky proposed an empirical linear correlation between the natural logarithm of the surface tension and the reciprocal viscosity, which seems to work adequately for a wide range of fluids. In particular, it has been shown that it is useful in the case of n-alkanes and their binary and ternary mixtures. More recently however, it has been found not to work for several ionic liquids unless the reciprocal viscosity is raised to a power. The exponent of this power was fixed to be 0.3, at least for the studied ionic fluids. In the present work, the performance and accuracy of both the original Pelofsky correlation and the modified expression including the exponent are studied for 56 non-ionic fluids of different kinds over a broad range of temperatures. Also, the temperature range is delimited for which each expression reproduces the surface tension values with average absolute deviations below 1%. The needed coefficients are given for both the broad and the delimited temperature range for each expressio...

  9. A sharp interface method for compressible liquid–vapor flow with phase transition and surface tension

    Energy Technology Data Exchange (ETDEWEB)

    Fechter, Stefan, E-mail: stefan.fechter@iag.uni-stuttgart.de [Institut für Aerodynamik und Gasdynamik, Universität Stuttgart, Pfaffenwaldring 21, 70569 Stuttgart (Germany); Munz, Claus-Dieter, E-mail: munz@iag.uni-stuttgart.de [Institut für Aerodynamik und Gasdynamik, Universität Stuttgart, Pfaffenwaldring 21, 70569 Stuttgart (Germany); Rohde, Christian, E-mail: Christian.Rohde@mathematik.uni-stuttgart.de [Institut für Angewandte Analysis und Numerische Simulation, Universität Stuttgart, Pfaffenwaldring 57, 70569 Stuttgart (Germany); Zeiler, Christoph, E-mail: Christoph.Zeiler@mathematik.uni-stuttgart.de [Institut für Angewandte Analysis und Numerische Simulation, Universität Stuttgart, Pfaffenwaldring 57, 70569 Stuttgart (Germany)

    2017-05-01

    The numerical approximation of non-isothermal liquid–vapor flow within the compressible regime is a difficult task because complex physical effects at the phase interfaces can govern the global flow behavior. We present a sharp interface approach which treats the interface as a shock-wave like discontinuity. Any mixing of fluid phases is avoided by using the flow solver in the bulk regions only, and a ghost-fluid approach close to the interface. The coupling states for the numerical solution in the bulk regions are determined by the solution of local two-phase Riemann problems across the interface. The Riemann solution accounts for the relevant physics by enforcing appropriate jump conditions at the phase boundary. A wide variety of interface effects can be handled in a thermodynamically consistent way. This includes surface tension or mass/energy transfer by phase transition. Moreover, the local normal speed of the interface, which is needed to calculate the time evolution of the interface, is given by the Riemann solution. The interface tracking itself is based on a level-set method. The focus in this paper is the description of the two-phase Riemann solver and its usage within the sharp interface approach. One-dimensional problems are selected to validate the approach. Finally, the three-dimensional simulation of a wobbling droplet and a shock droplet interaction in two dimensions are shown. In both problems phase transition and surface tension determine the global bulk behavior.

  10. A sharp interface method for compressible liquid-vapor flow with phase transition and surface tension

    Science.gov (United States)

    Fechter, Stefan; Munz, Claus-Dieter; Rohde, Christian; Zeiler, Christoph

    2017-05-01

    The numerical approximation of non-isothermal liquid-vapor flow within the compressible regime is a difficult task because complex physical effects at the phase interfaces can govern the global flow behavior. We present a sharp interface approach which treats the interface as a shock-wave like discontinuity. Any mixing of fluid phases is avoided by using the flow solver in the bulk regions only, and a ghost-fluid approach close to the interface. The coupling states for the numerical solution in the bulk regions are determined by the solution of local two-phase Riemann problems across the interface. The Riemann solution accounts for the relevant physics by enforcing appropriate jump conditions at the phase boundary. A wide variety of interface effects can be handled in a thermodynamically consistent way. This includes surface tension or mass/energy transfer by phase transition. Moreover, the local normal speed of the interface, which is needed to calculate the time evolution of the interface, is given by the Riemann solution. The interface tracking itself is based on a level-set method. The focus in this paper is the description of the two-phase Riemann solver and its usage within the sharp interface approach. One-dimensional problems are selected to validate the approach. Finally, the three-dimensional simulation of a wobbling droplet and a shock droplet interaction in two dimensions are shown. In both problems phase transition and surface tension determine the global bulk behavior.

  11. Quantum Magnetic Oscillations of the Surface Tension at a Metal-Insulator Interface

    Science.gov (United States)

    Dubovskii, L. B.

    2016-03-01

    Any metal-insulator transition (MI transition) in a crystalline material must be a transition from a situation in which electronic bands overlap to a situation when they do not (Mott, Metal-insulator, 2nd edn. Taylor@Francis, London, 1990). For this case the self-consistent equations for the two-band conductor are formulated (cf. Dubovskii, JETP Lett. 99(1):22-26, 2014). The description of the MI phase transition is based on two order parameters. The first one is the material density distribution at the MI boundary ρ ({vec {r}}). The second one is a four-component complex vector in spin space Upsilon ({vec {r}}). The value Upsilon ({vec {r}}) determines the electron density in the metallic or semimetallic phase in the presence of an external magnetic field. Two different components of the vector describe possible spin states of electrons and holes inserted in the external magnetic field. The solution gives a singular behavior of the surface tension at the MI interface in the vicinity of the MI phase transition. At low temperature quantum oscillations of the surface tension in the magnetic field take place.

  12. Conditions necessary for capillary hysteresis in porous media: Tests of grain size and surface tension influences

    Science.gov (United States)

    Tokunaga, Tetsu K.; Olson, Keith R.; Wan, Jiamin

    2004-05-01

    Hysteresis in the relation between water saturation and matric potential is generally regarded as a basic aspect of unsaturated porous media. However, the nature of an upper length scale limit for saturation hysteresis has not been previously addressed. Since hysteresis depends on whether or not capillary rise occurs at the grain scale, this criterion was used to predict required combinations of grain size, surface tension, fluid-fluid density differences, and acceleration in monodisperse systems. The Haines number (Ha), composed of the aforementioned variables, is proposed as a dimensionless number useful for separating hysteretic (Ha 15) behavior. Vanishing of hysteresis was predicted to occur for grain sizes greater than 10.4 ± 0.5 mm, for water-air systems under the acceleration of ordinary gravity, based on Miller-Miller scaling and Haines' original model for hysteresis. Disappearance of hysteresis was tested through measurements of drainage and wetting curves of sands and gravels and occurs between grain sizes of 10 and 14 mm (standard conditions). The influence of surface tension was tested through measurements of moisture retention in 7 mm gravel, without and with a surfactant (sodium dodecylbenzenesulfonate (SDBS)). The ordinary water system (Ha = 7) exhibited hysteresis, while the SDBS system (Ha = 18) did not. The experiments completed in this study indicate that hysteresis in moisture retention relations has an upper limit at Ha = 16 ± 2 and show that hysteresis is not a fundamental feature of unsaturated porous media.

  13. Thin Film Morphology of Block Copolymers Containing Polydimethylsiloxane as a Function of the Surface Tension of the Opposing Block

    Science.gov (United States)

    Wadley, Maurice; Cavicchi, Kevin

    2008-03-01

    The self-assembly of block copolymers into ordered nanostructures such as spheres, cylinders, and lamellae in the range of 10-100 nm makes them interesting materials for patterning surfaces. Thin films of block copolymers containing poly(dimethylsiloxane) (PDMS) are attractive for patterning due to their high oxygen etch resistance compared to other polymers. The main disadvantage of these polymers for patterning is the low surface tension of PDMS. This causes the preferential migration of PDMS to the air/film interface driving the formation of domains parallel to the interface and surface wetting layers. In this work a series of AB block copolymers containing PDMS have been prepared where the surface tension of the opposing block was varied. The effect of changing the surface tension mismatch between the blocks on the thin film morphology will be discussed.

  14. STUDIES ON SURFACE TENSION OF SELECTED MOUTHWASH FORMULATION BY DROP NUMBER METHOD USING TRAUBE’S STALAGMOMETER TECHNIQUE

    Directory of Open Access Journals (Sweden)

    Ghindora Ghanshayam L

    2011-02-01

    Full Text Available The selected marketed mouthwash formulations was carried out using Traube’s stalagmometer technique by drop number method to determine their individual surface tension for further identification, structure elucidation and chemical constituents. The formulation I (Potassium nitrate & sodium fluoride, formulation II (Chlorhexidine gluconate, formulation III (Thymol, eucalyptol and menthol were selected for the case study. These formulations were also evaluated to their same quantity mixture ratio with distilled water combination for estimation of different percent composition. The main aim and rationale of the study was to evaluate the surface tension of three selected formulations with distilled water. In individual surface tension study, it was noted that formulation II (48.29 dyne/cm showed highest value and formulation III (40.81 dyne/cm showed lowest value comparison between the three formulations under laboratory conditions. The 50% formulation mixture with distilled water showed minimum surface tension (49.20 dyne/cm and 90% formulation mixture with distilled water showed maximum surface tension (54.30 dyne/cm amongst other composition. In our present study, all the percent composition values were less than standard surface tension value. The 20% (50.31 dyne/cm, 70% (50.64 dyne/cm, 80% (50.26 dyne/cm and 30% (49.30 dyne/cm, 50% (49.20 dyne/cm and also 40% (51.73 dyne/cm, 60% (51.26 dyne/cm formulation mixture with distilled water showed approximately same surface tension values.

  15. The interaction of human endothelial cells with chemical gradient surfaces during exposure to flow

    NARCIS (Netherlands)

    Ruardy, TG; Moorlag, HE; Schakenraad, JM; Van der Meer, J; Van der Mei, HC; Busscher, HJ; Olij, WJV; Anderson, HR

    1998-01-01

    In this study, the position bound shape, spreading, detachment and migration of adhering HUVEC endothelial cells on dichlorodimethylsilane (DDS) chemical gradient surfaces was investigated during exposure to flow in a parallel plate flow chamber in the presence of` serum proteins. Gradient surfaces

  16. ADHESION AND SPREADING OF HUMAN SKIN FIBROBLASTS ON PHYSICOCHEMICALLY CHARACTERIZED GRADIENT SURFACES

    NARCIS (Netherlands)

    RUARDY, TG; SCHAKENRAAD, JM; VANDERMEI, HC; BUSSCHER, HJ

    1995-01-01

    In this study, adhesion and spreading of human skin fibroblasts on gradient surfaces of dichlorodimethylsilane (DDS) coupled to glass was investigated. Gradient surfaces were prepared by the diffusion technique and characterized by the Wilhelmy plate technique for their wettability and by scanning x

  17. Surface tension-induced high aspect-ratio PDMS micropillars with concave and convex lens tips

    KAUST Repository

    Li, Huawei

    2013-04-01

    This paper reports a novel method for the fabrication of 3-dimensional (3D) Polydimethylsiloxane (PDMS) micropillars with concave and convex lens tips in a one-step molding process, using a CO2 laser-machined Poly(methyl methacrylate) (PMMA) mold with through holes. The PDMS micropillars are 4 mm high and have an aspect ratio of 251. The micropillars are formed by capillary force drawing up PDMS into the through hole mold. The concave and convex lens tips of the PDMS cylindrical micropillars are induced by surface tension and are controllable by changing the surface wetting properties of the through holes in the PMMA mold. This technique eliminates the requirements of expensive and complicated facilities to prepare a 3D mold, and it provides a simple and rapid method to fabricate 3D PDMS micropillars with controllable dimensions and tip shapes. © 2013 IEEE.

  18. The electrical conductivity, density and surface tension of molten salts containing zirconium fluoride

    Energy Technology Data Exchange (ETDEWEB)

    Katyshev, S F; Teslyuk, L M; Eltsova, N V [Urals State Technical University-UPI, 19 Mira Str., Ekaterinburg 620002 (Russian Federation)], E-mail: tnv@htf.ustu.ru, E-mail: ksf@mail.ustu.ru

    2008-02-15

    The temperature dependencies of specific electric conductivity, density and surface tension of molten LiF-KF-ZrF{sub 4} mixtures in a wide concentration range were investigated using relative capillary method and method of maximum pressure in a gas bubble. The obtained values of molar electric conductivity, molar volumes and excess thermodynamic functions of melt surface layer have noticeable deviations from those calculated for ideal mixtures. This phenomenon can be explained by some specific interaction between the components of studied ternary mixtures. Mixing the components in such melts is accompanied by a noticeable interaction with predominant formation of stable zirconium fluoride complex ions. The values of deviations depend on the ionic composition of the salt mixtures.

  19. d-α-tocopherol nanoemulsions: Size properties, rheological behavior, surface tension, osmolarity and cytotoxicity

    Directory of Open Access Journals (Sweden)

    M.C. Teixeira

    2017-02-01

    Full Text Available The aim of this study was the assessment of the physicochemical stability of d-α-tocopherol formulated in medium chain triglyceride nanoemulsions, stabilized with Tween®80 and Lipoid®S75 as surfactant and co-surfactant, respectively. d-α-tocopherol was selected as active ingredient because of its well-recognized interesting anti-oxidant properties (such as radical scavenger for food and pharmaceutical industries. A series of nanoemulsions of mean droplet size below 90 nm (polydispersity index < 0.15 have been produced by high-pressure homogenization, and their surface electrical charge (zeta potential, pH, surface tension, osmolarity, and rheological behavior, were characterized as a function of the d-α-tocopherol loading. In vitro studies in Caco-2 cell lines confirmed the safety profile of the developed nanoemulsions with percentage of cell viability above 90% for all formulations.

  20. Surface tension of molten Al-Si alloy at temperatures ranging from 92.3 to 112.3 K

    Institute of Scientific and Technical Information of China (English)

    DOU Lei; YUAN ZhangFu; LI JianQiang; LI Jing; WANG XiaoQiang

    2008-01-01

    The surface tension of molten AlSi20 alloy has been measured by using the sessile drop method at 923-1123 K under argon atmosphere in both heating-up and cooling processes. The result shows that the surface tension of this alloy decreases as long as temperature increases. The results of surface tension and contact angles in heating-up process have differences from those obtained in cooling process, because the metal microstructures have some changes at different temperatures based on the metal genetic theory. The surface tension of molten AISi20 alloy and that of molten pure aluminum have been compared as well, and the temperature coefficient of AlSi20 alloy is slightly lower than that of Al. The result has been analyzed by the linear scanning analysis with ESEM. The concentration of silicon in most region of the bulk is lower than that of the surface and the addition of Si to pure Al decreases the surface tension of molten pure Al.

  1. A free energy-based surface tension force model for simulation of multiphase flows by level-set method

    Science.gov (United States)

    Yuan, H. Z.; Chen, Z.; Shu, C.; Wang, Y.; Niu, X. D.; Shu, S.

    2017-09-01

    In this paper, a free energy-based surface tension force (FESF) model is presented for accurately resolving the surface tension force in numerical simulation of multiphase flows by the level set method. By using the analytical form of order parameter along the normal direction to the interface in the phase-field method and the free energy principle, FESF model offers an explicit and analytical formulation for the surface tension force. The only variable in this formulation is the normal distance to the interface, which can be substituted by the distance function solved by the level set method. On one hand, as compared to conventional continuum surface force (CSF) model in the level set method, FESF model introduces no regularized delta function, due to which it suffers less from numerical diffusions and performs better in mass conservation. On the other hand, as compared to the phase field surface tension force (PFSF) model, the evaluation of surface tension force in FESF model is based on an analytical approach rather than numerical approximations of spatial derivatives. Therefore, better numerical stability and higher accuracy can be expected. Various numerical examples are tested to validate the robustness of the proposed FESF model. It turns out that FESF model performs better than CSF model and PFSF model in terms of accuracy, stability, convergence speed and mass conservation. It is also shown in numerical tests that FESF model can effectively simulate problems with high density/viscosity ratio, high Reynolds number and severe topological interfacial changes.

  2. Photodetachment of negative ion in a gradient electric field near a metal surface

    Institute of Scientific and Technical Information of China (English)

    Liu Tian-Qi; Wang De-Hun; Han Cai; Liu Jiang; Liang Dong-Qi; Xie Si-Cheng

    2012-01-01

    Based on closed-orbit theory,the photodetachment of Hˉ in a gradient electric field near a metal surface is studied.It is demonstrated that the gradient electric field has a significant influence on the photodetachment of negative ions near a metal surface.With the increase of the gradient of the electric field,the oscillation in the photodetachment cross section becomes strengthened.Besides,in contrast to the photodetachment of Hˉ near a metal surface in a uniform electric field,the oscillating amplitude and the oscillating region in the cross section of a gradient electric field also become enlarged.Therefore,we can use the gradient electric field to control the photodetachment of negative ions near a metal surface.We hope that our results will be useful for understanding the photodetachment of negative ions in the vicinity of surfaces,cavities,and ion traps.

  3. Platelet adhesion onto wettability gradient surfaces in the absence and presence of plasma proteins.

    Science.gov (United States)

    Lee, J H; Lee, H B

    1998-08-01

    A wettability gradient was prepared on lowdensity polyethylene (PE) sheets by treating them in air with a corona from a knife-type electrode the power of which increased gradually along the sample length. The PE surfaces oxidized gradually with the increasing corona power and a wettability gradient was created on the surfaces, as evidenced by the measurement of water contact angles, Fourier transform infrared spectroscopy in the attenuated total reflectance mode, and electron spectroscopy for chemical analysis. The wettability gradient surfaces prepared were used to investigate the adhesion behavior of platelets in the absence and presence of plasma proteins in terms of the surface hydrophilicity/hydrophobicity of polymeric materials. The platelets adhered to the wettability gradient surfaces along the sample length were counted and examined by scanning electron microscopy (SEM). It was observed that the platelet adhesion in the absence of plasma proteins increased gradually as the surface wettability increased along the sample length. The platelets adhered to the hydrophilic positions of the gradient surface also were more activated (possessed more pseudo pods as examined by SEM) than on the more hydrophobic ones. However, platelet adhesion in the presence of plasma proteins decreased gradually with the increasing surface wettability; the platelets adhered to the surface also were more activated on the hydrophobic positions of the gradient surface. This result is closely related to plasma protein adsorption on the surface. Plasma protein adsorption on the wettability gradient surface increased with the increasing surface wettability. More plasma protein adsorption on the hydrophilic positions of the gradient surface caused less platelet adhesion, probably due to platelet adhesion inhibiting proteins, such as high-molecular-weight kininogen, which preferably adsorbs onto the surface by the so-called Vroman effect. It seems that both the presence of plasma proteins

  4. Surface Tension Directed Fluidic Self-Assembly of Semiconductor Chips across Length Scales and Material Boundaries

    Directory of Open Access Journals (Sweden)

    Shantonu Biswas

    2016-03-01

    Full Text Available This publication provides an overview and discusses some challenges of surface tension directed fluidic self-assembly of semiconductor chips which are transported in a liquid medium. The discussion is limited to surface tension directed self-assembly where the capture, alignment, and electrical connection process is driven by the surface free energy of molten solder bumps where the authors have made a contribution. The general context is to develop a massively parallel and scalable assembly process to overcome some of the limitations of current robotic pick and place and serial wire bonding concepts. The following parts will be discussed: (2 Single-step assembly of LED arrays containing a repetition of a single component type; (3 Multi-step assembly of more than one component type adding a sequence and geometrical shape confinement to the basic concept to build more complex structures; demonstrators contain (3.1 self-packaging surface mount devices, and (3.2 multi-chip assemblies with unique angular orientation. Subsequently, measures are discussed (4 to enable the assembly of microscopic chips (10 μm–1 mm; a different transport method is introduced; demonstrators include the assembly of photovoltaic modules containing microscopic silicon tiles. Finally, (5 the extension to enable large area assembly is presented; a first reel-to-reel assembly machine is realized; the machine is applied to the field of solid state lighting and the emerging field of stretchable electronics which requires the assembly and electrical connection of semiconductor devices over exceedingly large area substrates.

  5. Studies on surface tension effect for free surface flow around floating models; Futai mokei mawari no jiyu hyomenryu ni oyobosu hyomen choryoku no eikyo ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, K. [Yokohama National Univ., Yokohama (Japan). Faculty of Engineering; Akiba, H. [Toyo Construction Co. Ltd., Tokyo (Japan)

    1996-12-31

    The effect of surface tension on free surface flow around floating models is discussed experimentally and numerically. Three-dimensional free surface flow around vertical circular cylinders floating in a circulating water channel was visually observed, where a surface-active agent was added to water. The results are analyzed using Weber number. The numerical analysis was done for vertical cylinder and CY100 models using the Rankine source method. Weber number of at least around 120 is necessary to eliminate the effect of surface tension from free surface flow around the CY100 model. The numerical analysis for the cylinder model needs simulation with wavelength shorter than that of free surface wave used by the Rankine source method. The model for the resistance test should be at least around 7m long to eliminate the effect of surface tension at Froude number of 0.1 or higher. 15 refs., 12 figs., 2 tabs.

  6. Studies on surface tension effect for free surface flow around floating models; Futai mokei mawari no jiyu hyomenryu ni oyobosu hyomen choryoku no eikyo ni kansuru kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, K. [Yokohama National Univ., Yokohama (Japan). Faculty of Engineering; Akiba, H. [Toyo Construction Co. Ltd., Tokyo (Japan)

    1996-12-31

    The effect of surface tension on free surface flow around floating models is discussed experimentally and numerically. Three-dimensional free surface flow around vertical circular cylinders floating in a circulating water channel was visually observed, where a surface-active agent was added to water. The results are analyzed using Weber number. The numerical analysis was done for vertical cylinder and CY100 models using the Rankine source method. Weber number of at least around 120 is necessary to eliminate the effect of surface tension from free surface flow around the CY100 model. The numerical analysis for the cylinder model needs simulation with wavelength shorter than that of free surface wave used by the Rankine source method. The model for the resistance test should be at least around 7m long to eliminate the effect of surface tension at Froude number of 0.1 or higher. 15 refs., 12 figs., 2 tabs.

  7. Convection due to surface-tension gradients. [in reduced gravity spacecraft environments

    Science.gov (United States)

    Ostrach, S.

    1978-01-01

    The use of dimensionless parameters to study fluid motions that could occur in a reduced-gravity environment is discussed. The significance of the Marangoni instability is considered, and the use of dimensionless parameters to investigate problems such as thermo and diffusocapillary flows is described. Characteristics of fluid flow in space are described, and the relation and interaction of motions due to capillarity and buoyancy is examined.

  8. Effects of Environmental Oxygen Content and Dissolved Oxygen on the Surface Tension and Viscosity of Liquid Nickel

    Science.gov (United States)

    SanSoucie, M. P.; Rogers, J. R.; Kumar, V.; Rodriguez, J.; Xiao, X.; Matson, D. M.

    2016-07-01

    The NASA Marshall Space Flight Center's electrostatic levitation (ESL) laboratory has recently added an oxygen partial pressure controller. This system allows the oxygen partial pressure within the vacuum chamber to be measured and controlled in the range from approximately 10^{-28} {to} 10^{-9} bar, while in a vacuum atmosphere. The oxygen control system installed in the ESL laboratory's main chamber consists of an oxygen sensor, oxygen pump, and a control unit. The sensor is a potentiometric device that determines the difference in oxygen activity in two gas compartments (inside the chamber and the air outside of the chamber) separated by an electrolyte. The pump utilizes coulometric titration to either add or remove oxygen. The system is controlled by a desktop control unit, which can also be accessed via a computer. The controller performs temperature control for the sensor and pump, has a PID-based current loop and a control algorithm. Oxygen partial pressure has been shown to play a significant role in the surface tension of liquid metals. Oxide films or dissolved oxygen may lead to significant changes in surface tension. The effects on surface tension and viscosity by oxygen partial pressure in the surrounding environment and the melt dissolved oxygen content will be evaluated, and the results will be presented. The surface tension and viscosity will be measured at several different oxygen partial pressures while the sample is undercooled. Surface tension and viscosity will be measured using the oscillating droplet method.

  9. Effects of polar cortical cytoskeleton and unbalanced cortical surface tension on intercellular bridge thinning during cytokinesis

    Institute of Scientific and Technical Information of China (English)

    Li Wang; Mei-Wen An; Xiao-Na Li; Fang Yang; Yang Liu

    2011-01-01

    To probe the contributions of polar cortical cytoskeleton and the surface tension of daughter cells to intercellular bridgethinning dynamics during cytokinesis,we applied cytochalasin D (CD) or colchicine (COLC) in a highly localized manner to polar regions of dividing normal rat kidney (NRK) cells.We observed cellular morphological changes and analyzed the intercellular bridge thinning trajectories of dividing cells with different polar cortical characteristics.Global blebbistatin (BS) application was used to obtain cells losing active contractile force groups.Our results show that locally released CD or colchicine at the polar region caused inhibition of cytokinesis before ingression.Similar treatment at phases after ingression allowed completion of cytokinesis but dramatically influenced the trajectories of intercellular bridge thinning.Disturbing single polar cortical actin induced transformation of the intercellular bridge thinning process,and polar cortical tension controlled deformation time of intercellular bridges.Our study provides a feasible framework to induce and analyze the effects of local changes in mechanical properties of cellular components on single cellular cytokinesis.

  10. Dynamics of two-phase interfaces and surface tensions: A density-functional theory perspective

    Science.gov (United States)

    Yatsyshin, Petr; Sibley, David N.; Duran-Olivencia, Miguel A.; Kalliadasis, Serafim

    2016-11-01

    Classical density functional theory (DFT) is a statistical mechanical framework for the description of fluids at the nanoscale, where the inhomogeneity of the fluid structure needs to be carefully accounted for. By expressing the grand free-energy of the fluid as a functional of the one-body density, DFT offers a theoretically consistent and computationally accessible way to obtain two-phase interfaces and respective interfacial tensions in a ternary solid-liquid-gas system. The dynamic version of DFT (DDFT) can be rigorously derived from the Smoluchowsky picture of the dynamics of colloidal particles in a solvent. It is generally agreed that DDFT can capture the diffusion-driven evolution of many soft-matter systems. In this context, we use DDFT to investigate the dynamic behaviour of two-phase interfaces in both equilibrium and dynamic wetting and discuss the possibility of defining a time-dependent surface tension, which still remains in debate. We acknowledge financial support from the European Research Council via Advanced Grant No. 247031 and from the Engineering and Physical Sciences Research Council of the UK via Grants No. EP/L027186 and EP/L020564.

  11. Performing chemical reactions in virtual capillary of surface tension-confined microfluidic devices

    Indian Academy of Sciences (India)

    Angshuman Nag; Biswa Ranjan Panda; Arun Chattopadhyay

    2005-10-01

    In this paper we report a new method of fabrication of surface tension-confined microfluidic devices on glass. We have also successfully carried out some well-known chemical reactions in these fluidic channels to demonstrate the usefulness of these wall-less microchannels. The confined flow path of liquid was achieved on the basis of extreme differences in hydrophobic and hydrophilic characters of the surface. The flow paths were fabricated by making parallel lines using permanent marker pen ink or other polymer on glass surfaces. Two mirror image patterned glass plates were then sandwiched one on top of the other, separated by a thin gap - created using a spacer. The aqueous liquid moves between the surfaces by capillary forces, confined to the hydrophilic areas without wetting the hydrophobic lines, achieving liquid confinement without physical side-walls. We have shown that the microfluidic devices designed in such a way can be very useful due to their simplicity and low fabrication cost. More importantly, we have also demonstrated that the minimum requirement of such a working device is a hydrophilic line surrounded by hydrophobic environment, two walls of which are constituted of air and the rest is made of a hydrophobic surface.

  12. Laplacian drop shapes and effect of random perturbations on accuracy of surface tension measurement for different drop constellations.

    Science.gov (United States)

    Saad, Sameh M I; Neumann, A Wilhelm

    2015-08-01

    Theoretical drop shapes are calculated for three drop constellations: pendant drops, constrained sessile drops, and unconstrained sessile drops. Based on total Gaussian curvature, shape parameter and critical shape parameter are discussed as a function of different drop sizes and surface tensions. The shape parameter is linked to physical parameters for every drop constellation. The as yet unavailable detailed dimensional analysis for the unconstrained sessile drop is presented. Results show that the unconstrained sessile drop shape depends on a dimensionless volume term and the contact angle. Random perturbations are introduced and the accuracy of surface tension measurement is assessed for precise and perturbed profiles of the three drop constellations. It is concluded that pendant drops are the best method for accurate surface tension measurement, followed by constrained sessile drops. The unconstrained sessile drops come last because they tend to be more spherical at low and moderate contact angles. Of course, unconstrained sessile drops are the only option if contact angles are to be measured.

  13. On Riemann Solvers and Kinetic Relations for Isothermal Two-Phase Flows with Surface Tension

    CERN Document Server

    Rohde, Christian

    2016-01-01

    We consider a sharp-interface approach for the inviscid isothermal dynamics of compressible two-phase flow, that accounts for phase transition and surface tension effects. To fix the mass exchange and entropy dissipation rate across the interface kinetic relations are frequently used. The complete uni-directional dynamics can then be understood by solving generalized two-phase Riemann problems. We present new well-posedness theorems for the Riemann problem and corresponding computable Riemann solvers, that cover quite general equations of state, metastable input data and curvature effects. The new Riemann solver is used to validate different kinetic relations on physically relevant problems including a comparison with experimental data. Riemann solvers are building blocks for many numerical schemes that are used to track interfaces in two-phase flow. It is shown that the new Riemann solver enables reliable and efficient computations for physical situations that could not be treated before.

  14. Modeling of a Curvilinear Planar Crack with a Curvature-Dependent Surface Tension

    KAUST Repository

    Zemlyanova, A. Y.

    2012-01-01

    An approach to modeling fracture incorporating interfacial mechanics is applied to the example of a curvilinear plane strain crack. The classical Neumann boundary condition is augmented with curvature-dependent surface tension. It is shown that the considered model eliminates the integrable crack-tip stress and strain singularities of order 1/2 present in the classical linear fracture mechanics solutions, and also leads to the sharp crack opening that is consistent with empirical observations. Unlike for the case of a straight crack, for a general curvilinear crack some components of the stresses and the derivatives of the displacements may still possess weaker singularities of a logarithmic type. Generalizations of the present study that lead to complete removal of all crack-tip singularities, including logarithmic, are the subject of a future paper. © 2012 Society for Industrial and Applied Mathematics.

  15. Pairwise Force Smoothed Particle Hydrodynamics model for multiphase flow: Surface tension and contact line dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Tartakovsky, Alexandre M.; Panchenko, Alexander

    2016-01-01

    We present a novel formulation of the Pairwise Force Smoothed Particle Hydrodynamics Model (PF-SPH) and use it to simulate two- and three-phase flows in bounded domains. In the PF-SPH model, the Navier-Stokes equations are discretized with the Smoothed Particle Hydrodynamics (SPH) method and the Young-Laplace boundary condition at the fluid-fluid interface and the Young boundary condition at the fluid-fluid-solid interface are replaced with pairwise forces added into the Navier-Stokes equations. We derive a relationship between the parameters in the pairwise forces and the surface tension and static contact angle. Next, we demonstrate the accuracy of the model under static and dynamic conditions. Finally, to demonstrate the capabilities and robustness of the model we use it to simulate flow of three fluids in a porous material.

  16. New correlations between viscosity and surface tension for saturated normal fluids

    CERN Document Server

    Zheng, Mengmeng; Mulero, A

    2016-01-01

    New correlations between viscosity and surface tension are proposed and checked for saturated normal fluids. The proposed correlations contain three or four adjustable coefficients for every fluid. They were obtained by fitting 200 data points, ranging from the triple point to a point very near to the critical one. Forty substances were considered, including simple fluids (such as rare gases), simple hydrocarbons, refrigerants, and some other substances such as carbon dioxide and water. Two correlation models with three adjustable coefficients were checked, and the results showed that the one based on the modified Pelofsky expression gives the better overall results. A new 4-coefficient correlation is then proposed which clearly improves the results, giving the lowest overall deviations for 32 out of the 40 substances considered and absolute average deviations below 10% for all of them.

  17. A multiscale method for compressible liquid-vapor flow with surface tension*

    Directory of Open Access Journals (Sweden)

    Jaegle Felix

    2013-01-01

    Full Text Available Discontinuous Galerkin methods have become a powerful tool for approximating the solution of compressible flow problems. Their direct use for two-phase flow problems with phase transformation is not straightforward because this type of flows requires a detailed tracking of the phase front. We consider the fronts in this contribution as sharp interfaces and propose a novel multiscale approach. It combines an efficient high-order Discontinuous Galerkin solver for the computation in the bulk phases on the macro-scale with the use of a generalized Riemann solver on the micro-scale. The Riemann solver takes into account the effects of moderate surface tension via the curvature of the sharp interface as well as phase transformation. First numerical experiments in three space dimensions underline the overall performance of the method.

  18. Surface tension at the liquid-vapor interface of screened ionic mixtures

    Directory of Open Access Journals (Sweden)

    M.González-Melchor

    2004-01-01

    Full Text Available The liquid-vapor interface of binary mixtures of charged particles is studied using molecular dynamics (MD simulations. The interaction between particles is given by a short-range repulsive potential plus an attractive/repulsive Yukawa term, which models screened electrostatic interactions. To obtain the components of the pressure tensor two methods were used: a hybrid MD method which combines the hard sphere and continuous forces and a standard continuous MD method where the hard sphere was replaced by a soft interaction. We show that both models give essentially the same results. As the range of interaction decreases, the critical temperature and surface tension increase. The comparison with the restricted primitive model of ionic fluids is discussed.

  19. Improved Correlation for Viscosity from Surface Tension Data for Saturated Normal Fluids

    CERN Document Server

    Tian, Jianxiang

    2016-01-01

    Several correlations between viscosity and surface tension for saturated normal fluids have been proposed in the literature. Usually, they include three or four adjustable coefficients for every fluid and give generally good results. In this paper we propose a new and improved four-coefficient correlation which was obtained by fitting data ranging from the triple point to a point very near to the critical one. Fifty four substances were considered, including simple fluids (such as rare gases), simple hydrocarbons, refrigerants, and some other substances such as carbon dioxide, water or ethanol. The new correlation clearly improves the results obtained with those previously available since it gives absolute average deviations below1% for 40 substances and below 2.1% for 10 substances more.

  20. Recommended Correlations for the Surface Tension of Aliphatic, Carboxylic, and Polyfunctional Organic Acids

    Science.gov (United States)

    Mulero, A.; Cachadiña, I.; Sanjuán, E. L.

    2016-09-01

    In previous papers, we have proposed specific correlations to reproduce the surface tension values for several sets of fluids and for wide ranges of temperatures. In this paper, we focus our attention on organic fatty (aliphatic, carboxylic, and polyfunctional) acids. We have taken into account the available data and values in the DIPPR and DETHERM databases and also Wohlfarth and Wohlfarth's (1997) book. In some cases we have also considered new data published elsewhere. All the data and values have been carefully filtered and subsequently fitted with the use of the model currently implemented in NIST's REFPROP program, calculating two or four adjustable coefficients for each fluid. As a result, we propose recommended correlations for 99 acids, providing mean absolute percentage deviations below 1.6% in all cases.

  1. Pairwise Force Smoothed Particle Hydrodynamics model for multiphase flow: Surface tension and contact line dynamics

    Science.gov (United States)

    Tartakovsky, Alexandre M.; Panchenko, Alexander

    2016-01-01

    We present a novel formulation of the Pairwise Force Smoothed Particle Hydrodynamics (PF-SPH) model and use it to simulate two- and three-phase flows in bounded domains. In the PF-SPH model, the Navier-Stokes equations are discretized with the Smoothed Particle Hydrodynamics (SPH) method, and the Young-Laplace boundary condition at the fluid-fluid interface and the Young boundary condition at the fluid-fluid-solid interface are replaced with pairwise forces added into the Navier-Stokes equations. We derive a relationship between the parameters in the pairwise forces and the surface tension and static contact angle. Next, we demonstrate the model's accuracy under static and dynamic conditions. Finally, we use the Pf-SPH model to simulate three phase flow in a porous medium.

  2. Effect of Viscosity on the GTA Welds Bead Penetration in Relation with Surface Tension Elements

    Directory of Open Access Journals (Sweden)

    K. Touileb

    2016-04-01

    Full Text Available The aim of this paper is to study the effect of the viscous dissipation on the surface tension and its role on the shape of weld pool. Experiments were conducted on four different casts of ferritic stainless steel with different content in the sulfur and titanium. The results show in particular that the presence of titanium solid compounds affects the role of sulfur as surfactant element. Titanium in the presence of carbon and oxygen, titanium forms solid compounds which affect the Marangoni convection due to the sulfur element in the weld pool. The viscous dissipation due to these compounds alters the flow rate of the molten metal. We expect that the viscosity of metal liquid was altered by these solid compounds. The viscous dissipation due to these compounds contributes to heat the molten metal leading to larger weld bead.

  3. MHD-convection in a plane horizontal layer with surface tension

    Energy Technology Data Exchange (ETDEWEB)

    Liyepinya, V.R.

    1978-01-01

    The relation between critical values of the Marangoni number, the Rayleigh number, and the Hartmann number, expressed in terms of series whose convergence becomes slower with higher values of the Hartmann number, is extended to the case of thermal contact without perturbations between a horizontal layer of fluid and a solid heat conductor of finite thickness underneath. Heat transfer at the free upper boundary of this layer occurs according to Newton's law, and the boundary conditions here take into account surface tension as well as its temperature dependence. The limits of monotonic instability in a magnetic field are calculated from a numerical solution to this problem. 5 references, 1 figure, 1 table.

  4. Surface tension of liquid Al-Cu and wetting at the Cu/Sapphire solid-liquid interface

    Science.gov (United States)

    Schmitz, J.; Brillo, J.; Egry, I.

    2014-02-01

    For the study of the interaction of a liquid alloy with differently oriented single crystalline sapphire surfaces precise surface tension data of the liquid are fundamental. We measured the surface tension of liquid Al-Cu contactlessly on electromagnetically levitated samples using the oscillating drop technique. Data were obtained for samples covering the entire range of composition and in a broad temperature range. The surface tensions can be described as linear functions of temperature with negative slopes. Moreover, they decrease monotonically with an increase of aluminium concentration. The observed behaviour with respect to both temperature and concentration is in agreement with a thermodynamic model calculation using the regular solution approximation. Surface tensions were used to calculate interfacial energies from the contact angles of liquid Cu droplets, deposited on the C(0001), A(11-20), R(1-102) surfaces of an α-Al2O3 substrate. The contact angles were measured by means of the sessile drop method at 1380 K. In the Cu/α-Al2O3 system, no anisotropy is evident neither for the contact angles nor for the interfacial energies of different surfaces. The work of adhesion of this system is isotropic, too.

  5. Facile Fabrication of Gradient Surface Based on (meth)acrylate Copolymer Films

    Science.gov (United States)

    Zhang, Y.; Yang, H.; Wen, X.-F.; Cheng, J.; Xiong, J.

    2016-08-01

    This paper describes a simple and economic approach for fabrication of surface wettability gradient on poly(butyl acrylate - methyl methacrylate) [P (BA-MMA)] and poly(butyl acrylate - methyl methacrylate - 2-hydroxyethyl methacrylate) [P (BA-MMA-HEMA)] films. The (meth)acrylate copolymer [including P (BA-MMA) and P (BA-MMA-HEMA)] films are hydrolyzed in an aqueous solution of NaOH and the transformation of surface chemical composition is achieved by hydrolysis in NaOH solution. The gradient wetting properties are generated based on different functional groups on the P (BA-MMA) and P (BA-MMA-HEMA) films. The effects of both the surface chemical and surface topography on wetting of the (meth)acrylate copolymer film are discussed. Surface chemical composition along the materials length is determined by XPS, and surface topography properties of the obtained gradient surfaces are analyzed by FESEM and AFM. Water contact angle system (WCAs) results show that the P (BA-MMA-HEMA) films provide a larger slope of the gradient wetting than P (BA-MMA). Moreover, this work demonstrates that the gradient concentration of chemical composition on the poly(meth) acrylate films is owing to the hydrolysis processes of ester group, and the hydrolysis reactions that have negligible influence on the surface morphology of the poly(meth) acrylate films coated on the glass slide. The gradient wettability surfaces may find broad applications in the field of polymer coating due to the compatibility of (meth) acrylate polymer.

  6. A numerical study of three-dimensional surface tension driven convection with fre surface deformation

    Science.gov (United States)

    Hsieh, Kwang-Chung

    1992-01-01

    The steady three-dimensional thermocapillary motion with a deformable free surface is studied numerically in both normal and zero gravity environments. Flow configurations consist of a square cavity heated from the side. In the analysis, the free surface is allowed to deform and the grid distribution is adapted to the surface deformation. The divergence-free condition is satisfied by using a dual time-stepping approach in the numerical scheme. Convective flux derivatives are evaluated using a third-order accurate upwind-biased flux-split differencing technique. The numerical solutions at the midplane of the square cavity are compared with the results from two-dimensional calculations. In addition, numerial results for cases under zero and normal gravity conditions are compared. Significantly different flow structures and surface deformation have been observed. The comparison of calculated results will be compared with experimental data in the updated version of this paper.

  7. Linear stability analysis in a liquid layer with a surface velocity gradient.

    Science.gov (United States)

    Białecki, Jarosław; Hołyst, Janusz A

    2003-06-01

    A case of combined planar Couette-Poiseuille flow corresponding to vanishing horizontal flux has been generalized by the introduction of a model for the surface velocity gradient. A relation corresponding to the Orr-Sommerfeld equation has been derived for this model. The critical value of the surface velocity gradient has been obtained. At the critical point, the corresponding critical Reynolds number equals infinity. Using an approximated method we estimated the behavior of the critical Reynolds number for a slightly overcritical surface velocity gradient.

  8. Surface composition gradients of immobilized cell signaling molecules. Epidermal growth factor on gold

    Energy Technology Data Exchange (ETDEWEB)

    Wang Qian [Department of Chemistry and Beckman Institute for Advanced Science and Technology, University of Illinois at Urbana-Champaign, 600 S. Mathews Ave., Urbana, IL 61801 (United States); Bohn, Paul W. [Department of Chemistry and Beckman Institute for Advanced Science and Technology, University of Illinois at Urbana-Champaign, 600 S. Mathews Ave., Urbana, IL 61801 (United States)]. E-mail: bohn@scs.uiuc.edu

    2006-08-14

    Surface composition gradients of the signaling molecule, epidermal growth factor (EGF), have been prepared by an adaptation of the electrochemical gradient technique. EGF is covalently bound to the reactive component, 11-amino-l-undecanethiol (AUT), in a counterpropagating two-component gradient composed of AUT and poly(ethylene glycol) thiol (PEG) using carbodiimide coupling chemistry. Areas of the surface presenting -NH{sub 2} termination react with succinimidyl esters of solvent-accessible acidic amino acids in EGF, while non-specific protein adsorption is resisted in the PEG regions. The maximum surface coverage of EGF prepared in this manner was determined by surface plasmon resonance reflectometry (SPR) on spatially uniform films to be 20% < {gamma} {sub EGF} < 70% depending on the concentration of the EGF derivatization solution. EGF retains its biological activity with this immobilization process, as verified by culturing human umbilical vein endothelial cell (HUVEC) on an EGF-terminated surface for 24 h. PEG shows good resistance to EGF physical adsorption as demonstrated by both SPR and X-ray photoelectron spectroscopy (XPS). The N / C ratio of EGF gradients, which is characteristic of EGF adsorption, because only the protein contains N, while both protein and PEG contain C, was spatially mapped with XPS. The gradient composition distributions are sigmoidal with lateral distance, with the position of the gradient transition region being readily controlled by adjusting the applied potential window. EGF gradients with variable quantitative surface coverage profiles were generated by varying EGF and AUT concentrations.

  9. Protein adsorption on gradient surfaces on polyethylene prepared in a shielded gas plasma

    NARCIS (Netherlands)

    Spijker, Hendrikje; Bos, Roelof; van Oeveren, Willem; de Vries, Jacob; Busscher, Hendrik

    1999-01-01

    In this study, a new and simple method is described to prepare wettability gradients on polymers by means of glow discharge in a partly shielded argon plasma. The surface characteristics of thus prepared gradients on low density polyethylene were determined by contact angle measurements and electron

  10. Elastic-Plastic J-Integral Solutions or Surface Cracks in Tension Using an Interpolation Methodology

    Science.gov (United States)

    Allen, P. A.; Wells, D. N.

    2013-01-01

    No closed form solutions exist for the elastic-plastic J-integral for surface cracks due to the nonlinear, three-dimensional nature of the problem. Traditionally, each surface crack must be analyzed with a unique and time-consuming nonlinear finite element analysis. To overcome this shortcoming, the authors have developed and analyzed an array of 600 3D nonlinear finite element models for surface cracks in flat plates under tension loading. The solution space covers a wide range of crack shapes and depths (shape: 0.2 less than or equal to a/c less than or equal to 1, depth: 0.2 less than or equal to a/B less than or equal to 0.8) and material flow properties (elastic modulus-to-yield ratio: 100 less than or equal to E/ys less than or equal to 1,000, and hardening: 3 less than or equal to n less than or equal to 20). The authors have developed a methodology for interpolating between the goemetric and material property variables that allows the user to reliably evaluate the full elastic-plastic J-integral and force versus crack mouth opening displacement solution; thus, a solution can be obtained very rapidly by users without elastic-plastic fracture mechanics modeling experience. Complete solutions for the 600 models and 25 additional benchmark models are provided in tabular format.

  11. Preparation and characterization of chemical gradient surfaces and their application for the study of cellular interaction phenomena

    NARCIS (Netherlands)

    Ruardy, TG; Schakenraad, JM; vanderMei, HC; Busscher, HJ

    1997-01-01

    Chemical gradient surfaces are surfaces with a gradually changing chemistry along their length which is responsible for a position bound variation in physical properties, most notably, the wettability. In this review, methods to prepare (palladium deposition, diffusion technique, density gradient

  12. A method for the determination of the surface tension of cellulosic fibres in their natural state and its relation with chemical composition

    NARCIS (Netherlands)

    Hazendonk, van J.M.; Putten, van der I.C.; Keurentjes, J.T.F.

    1995-01-01

    The surface tensions of several natural cellulosic fibres like flax, hemp, kenaf and cotton and a synthetic cellulosic fibre have been determined using the so-called floating test. This method determines the liquid surface tension δF at which fibres placed on a liquid surface remain just floating.

  13. Non-equilibrium surface tension of the vapour-liquid interface of active Lennard-Jones particles

    Science.gov (United States)

    Paliwal, Siddharth; Prymidis, Vasileios; Filion, Laura; Dijkstra, Marjolein

    2017-08-01

    We study a three-dimensional system of self-propelled Brownian particles interacting via the Lennard-Jones potential. Using Brownian dynamics simulations in an elongated simulation box, we investigate the steady states of vapour-liquid phase coexistence of active Lennard-Jones particles with planar interfaces. We measure the normal and tangential components of the pressure tensor along the direction perpendicular to the interface and verify mechanical equilibrium of the two coexisting phases. In addition, we determine the non-equilibrium interfacial tension by integrating the difference of the normal and tangential components of the pressure tensor and show that the surface tension as a function of strength of particle attractions is well fitted by simple power laws. Finally, we measure the interfacial stiffness using capillary wave theory and the equipartition theorem and find a simple linear relation between surface tension and interfacial stiffness with a proportionality constant characterized by an effective temperature.

  14. Newtonian and general relativistic contribution of gravity to surface tension of strange stars

    CERN Document Server

    Bagchi, M; Dey, M; Dey, J; Bhowmick, S; Bagchi, Manjari; Sinha, Monika; Dey, Mira; Dey, Jishnu; Bhowmick, Siddhartha

    2005-01-01

    Surface tension (S) is due to the inward force experienced by particles at the surface and usually gravitation does not play an important role in this force. But in compact stars the gravitational force on the particles is very large and S is found to depend not only on the interactions in the strange quark matter, but also on the structure of the star, i.e. on its mass and radius. Indeed, it has been claimed recently that 511 keV photons observed by the space probe INTEGRAL from the galactic bulge may be due to electron-positron annihilation, and their source may be the positron cloud outside of an antiquark star. Such stars, if they exist, may also go a long way towards explaining away the antibaryon deficit of the universe. For that to happen S must be high enough to allow for survival of quark/antiquark stars born in early stages of the formation of the universe. High value of S may also assist explanation of delayed gamma-ray burst after a supernova explosion, as conversion from normal matter to strange ...

  15. Microstructural and hardness gradients in Cu processed by high pressure surface rolling

    DEFF Research Database (Denmark)

    He, Q. Y.; Zhu, X.-M.; Mei, Q. S.

    2017-01-01

    in the topmost surface to the microscale in the bulk. The hardness varies from 1.37 GPa at the topmost surface to about 0.6 GPa in the coarse-grained matrix. The results of the investigation demonstrate that the HPSR process shows good potential for the generation of thick gradient microstructures on the surface...

  16. Interaction of two oral streptococcal strains with physicochemically characterized fluorosilane diffusion gradient surfaces

    NARCIS (Netherlands)

    Bos, Roelof; de Jonge, Jeroen H; van de Belt-Gritter, Elizabeth; Busscher, Hendrik; de Vries, Jacob

    2000-01-01

    Gradient surfaces have a defined variation in surface chemistry along their length that allow study of the influence of substratum wettability on bioadhesion phenomena along their length in relation with a controlled surface chemistry. (Tridecafluoro-1,1,2,2-tetrahydrooctyl)-1-dimethylchlorosilane (

  17. Patterned gradient surface for spontaneous droplet transportation and water collection: simulation and experiment

    Science.gov (United States)

    Tan, Xianhua; Zhu, Yiying; Shi, Tielin; Tang, Zirong; Liao, Guanglan

    2016-11-01

    We demonstrate spontaneous droplet transportation and water collection on wedge-shaped gradient surfaces consisting of alternating hydrophilic and hydrophobic regions. Droplets on the surfaces are modeled and simulated to analyze the Gibbs free energy and free energy gradient distributions. Big half-apex angle and great wettability difference result in considerable free energy gradient, corresponding to large driving force for spontaneous droplet transportation, thus causing the droplets to move towards the open end of the wedge-shaped hydrophilic regions, where the Gibbs free energy is low. Gradient surfaces are then fabricated and tested. Filmwise condensation begins on the hydrophilic regions, forming wedge-shaped tracks for water collection. Dropwise condensation occurs on the hydrophobic regions, where the droplet size distribution and departure diameters are controlled by the width of the regions. Condensate water from both the hydrophilic and hydrophobic regions are collected directionally to the open end of the wedge-shaped hydrophilic regions, agreeing with the simulations. Directional droplet transport and controllable departure diameters make the branched gradient surfaces more efficient than smooth surfaces for water collection, which proves that gradient surfaces are potential in water collection, microfluidic devices, anti-fogging and self-cleaning.

  18. CALCULATION OF CONTACT TENSIONS IN CONJUGATE SURFACES IN SPHERE GLOBOIDAL RUSK SYNCHRONOUS CARDAN HINGE

    Directory of Open Access Journals (Sweden)

    A. M. Saniotsky

    2015-01-01

    Full Text Available The paper presents  a calculation of contact tensions between conjugate surfaces in sphere globoidal rusk synchronous cardan hinge on the condition that there is power balance at the constant torque on the output shaft. The required torque effect on the intake shaft at the constant angular velocity  has been calculated with the help of the Hertz’s theory of contact deformations . The maximum contact pressure has been ascertained through the torque which determines strength of the cardan hinge, its durability, wear rate in  the conjugate friction pair. The paper investigates transmission dependence of the maximum torque while changing  material quality and according to various typical sizes of the cardan hinge. Dependences of the calculated maximum torque value on material strength have been demonstrated graphically  in the logarithmic coordinate system.  A formula for maximum contact pressure value has been derived and it determines  strength of the hinge mechanism, its durability and wear rate  in the conjugate friction pair.The effect of geometrical relationship between a spherical cam radius and a globoidal  surface radius of a hinge contact has been determined with the purpose to analyze optimal design parameters of the sphere globoidal rusk synchronous cardan hinge. It has been established that permissible torque in the hinge mechanism grows with a quadratic dependence while increasing a cam radius and  the torque is proportionally growing while increasing an axis radius of globoidal rusk surface on which spherical cams are set. The maximum permissible torque value grows with a cubic dependence while using qualitative material with thermally treated surface and application of lubrication materials which tolerates significant (up to [σ] = 1000 MPa contact loads.  Two-fold increase of typical size of the sphere globoidal rusk synchronous cardan hinge leads to an 8-fold increase of the permissible transmitted torque.

  19. Rhamnolipids elicit the same cytotoxic sensitivity between cancer cell and normal cell by reducing surface tension of culture medium.

    Science.gov (United States)

    Jiang, Lifang; Shen, Chong; Long, Xuwei; Zhang, Guoliang; Meng, Qin

    2014-12-01

    Biosurfactant rhamnolipids have been claimed to show biological activities of inhibiting the proliferation of cancer cells. In this study, the cytotoxicity of rhamnolipids was examined on four cancer cells (HepG2, Caco-2, Hela, MCF-7 cells) and two normal cells (HK-2 cell, primary hepatocyte). Interestingly, both cancer cells and normal cells exhibited similar sensitivities to the addition of rhamnolipids in culture medium, and the cytotoxicity was largely attenuated by the presence of fetal bovine serum (FBS) in culture medium. In correlation of the mono-/di-rhamnolipid cytotoxicity with the surface tension of culture medium, it was found that rhamnolipids triggered cytotoxicity whenever the surface tension of culture medium decreased below 41 mN/m irrespective of the FBS content in culture medium, cell line, or rhamnolipid congener. Similarly, each chemical surfactant (Tween-80, sodium dodecyl sulfate, and sodium dodecyl benzene sulfonate) could cause cytotoxicity on HepG2 cells whenever its addition made the surface tension under 41 mN/m in culture medium with or without the presence of FBS. It seems that rhamnolipids, like chemical surfactants, exhibited cytotoxicity by reducing the surface tension of culture medium rather than by changing its specific molecular structure, which had no selection on tumor cells. This study could offer helps to correct the misleading biological activity of rhamnolipids and to avoid the possible large wastes of time and expenses on developing the applications in antitumor drugs.

  20. Surface tension and its temperature coefficient of molten tin determined with the sessile drop method at different oxygen partial pressures.

    Science.gov (United States)

    Yuan, Zhang Fu; Mukai, Kusuhiro; Takagi, Katsuhiko; Ohtaka, Masahiko; Huang, Wen Lai; Liu, Qiu Sheng

    2002-10-15

    The surface tension of molten tin has been determined by the sessile drop method at temperatures ranging from 523 to 1033 K and in the oxygen partial pressure (P(O(2))) range from 2.85 x 10(-19) to 8.56 x 10(-6) MPa, and its dependence on temperature and oxygen partial pressure has been analyzed. At P(O(2))=2.85 x 10(-19) and 1.06 x 10(-15) MPa, the surface tension decreases linearly with the increase of temperature and its temperature coefficients are -0.151 and -0.094 mN m(-1) K(-1), respectively. However, at high P(O(2)) (3.17 x 10(-10), 8.56 x 10(-6) MPa), the surface tension increases with the temperature near the melting point (505 K) and decreases above 723 K. The surface tension decrease with increasing P(O(2)) is much larger near the melting point than at temperatures above 823 K. The contact angle between the molten tin and the alumina substrate is 158-173 degrees, and the wettability is poor.

  1. Determination of Surface Tension of Surfactant Solutions through Capillary Rise Measurements: An Image-Processing Undergraduate Laboratory Experiment

    Science.gov (United States)

    Huck-Iriart, Cristia´n; De-Candia, Ariel; Rodriguez, Javier; Rinaldi, Carlos

    2016-01-01

    In this work, we described an image processing procedure for the measurement of surface tension of the air-liquid interface using isothermal capillary action. The experiment, designed for an undergraduate course, is based on the analysis of a series of solutions with diverse surfactant concentrations at different ionic strengths. The objective of…

  2. On the physically based modeling of surface tension and moving contact lines with dynamic contact angles on the continuum scale

    NARCIS (Netherlands)

    Huber, M.; Keller, F.; Säckel, W.; Hirschler, M.; Kunz, P.; Hassanizadeh, S.M.|info:eu-repo/dai/nl/074974424; Nieken, U.

    2016-01-01

    The description of wetting phenomena is a challenging problem on every considerable length-scale. The behavior of interfaces and contact lines on the continuum scale is caused by intermolecular interactions like the Van der Waals forces. Therefore, to describe surface tension and the resulting

  3. On the physically based modeling of surface tension and moving contact lines with dynamic contact angles on the continuum scale

    NARCIS (Netherlands)

    Huber, M.; Keller, F.; Säckel, W.; Hirschler, M.; Kunz, P.; Hassanizadeh, S.M.; Nieken, U.

    2016-01-01

    The description of wetting phenomena is a challenging problem on every considerable length-scale. The behavior of interfaces and contact lines on the continuum scale is caused by intermolecular interactions like the Van der Waals forces. Therefore, to describe surface tension and the resulting dynam

  4. Chelation gradients for investigation of metal ion binding at silica surfaces.

    Science.gov (United States)

    Kannan, Balamurali; Higgins, Daniel A; Collinson, Maryanne M

    2014-08-26

    Centimeter-long surface gradients in bi- and tridentate chelating agents have been formed via controlled rate infusion, and the coordination of Cu(2+) and Zn(2+) to these surfaces has been examined as a function of distance by X-ray photoelectron spectroscopy (XPS). 3-(Trimethoxysilylpropyl)ethylenediamine and 3-(trimethoxysilylpropyl)diethylenetriamine were used as precursor silanes to form the chelation gradients. When the gradients were exposed to a metal ion solution, a series of coordination complexes formed along the length of the substrate. For both chelating agents at the three different concentrations studied, the amine content gradually increased from top to bottom as expected for a surface chemical gradient. While the Cu 2p peak area had nearly the same profile as nitrogen, the Zn 2p peak area did not and exhibited a plateau along much of the gradient. The normalized nitrogen-to-metal peak area ratio (N/M) was found to be highly dependent on the type of ligand, its surface concentration, and the type of metal ion. For Cu(2+), the N/M ratio ranged from 8 to 11 on the diamine gradient and was ∼4 on the triamine gradient, while for Zn(2+), the N/M ratio was 4-8 on diamine and 5-7 on triamine gradients. The extent of protonation of amine groups was higher for the diamine gradients, which could lead to an increased N/M ratio. Both 1:1 and 1:2 ligand/metal complexes along with dinuclear complexes are proposed to form, with their relative amounts dependent on the ligand, ligand density, and metal ion. Collectively, the methods and results described herein represent a new approach to study metal ion binding and coordination on surfaces, which is especially important to the extraction, preconcentration, and separation of metal ions.

  5. Modelling the cloud condensation nucleus activity of organic acids on the basis of surface tension and osmolality measurements

    Directory of Open Access Journals (Sweden)

    Z. Varga

    2007-09-01

    Full Text Available In this study vapour pressure osmometry was used to determine water activity in the solutions of organic acids. The surface tension of the solutions was also monitored in parallel and then Köhler curves were calculated for nine organic acids (oxalic, malonic, succinic, glutaric, adipic, maleic, malic, citric and cis-pinonic. Surface tension depression is negligible for most of the organic acids in dilute (≤1 w/w% solutions. Therefore, these compounds affect equilibrium vapour pressure only in the beginning phase of droplet formation when the droplet solution is more concentrated but not necessarily at the critical size. An exception is cis-pinonic acid which remarkably depress surface tension also in dilute (0.1 w/w% solution and hence at the critical point. The surface tension of organic acid solutions is influenced by the solubility of the compound, the length of the carbon chain and also by the polar functional groups present in the molecule. Similarly to surface tension solubility plays an important role also in water activity: compounds with higher solubility (e.g. malonic, maleic and glutaric acid reduce water activity significantly in the early phase of droplet formation while less soluble acids (e.g. succinic and adipic acid are saturated in small droplets and the solution starts diluting only in bigger droplets. As a consequence, compounds with lower solubility have a minor effect on water activity in the early phase of droplet formation. To deduce the total effect Köhler curves were calculated and critical supersaturations (Sc were determined for the organic acids using measured surface tension and water activity. It was found that critical supersaturation grew with growing carbon number. Oxalic acid had the lowest critical supersaturation in the size range studied and it was comparable to the activation of ammonium sulphate. The Sc values obtained in this study were compared to data from CCNC

  6. Reactivity mapping with electrochemical gradients for monitoring reactivity at surfaces in space and time.

    Science.gov (United States)

    Krabbenborg, Sven O; Nicosia, Carlo; Chen, Pengkun; Huskens, Jurriaan

    2013-01-01

    Studying and controlling reactions at surfaces is of great fundamental and applied interest in, among others, biology, electronics and catalysis. Because reaction kinetics is different at surfaces compared with solution, frequently, solution-characterization techniques cannot be used. Here we report solution gradients, prepared by electrochemical means, for controlling and monitoring reactivity at surfaces in space and time. As a proof of principle, electrochemically derived gradients of a reaction parameter (pH) and of a catalyst (Cu(I)) have been employed to make surface gradients on the micron scale and to study the kinetics of the (surface-confined) imine hydrolysis and the copper(I)-catalysed azide-alkyne 1,3-dipolar cycloaddition, respectively. For both systems, the kinetic data were spatially visualized in a two-dimensional reactivity map. In the case of the copper(I)-catalysed azide-alkyne 1,3-dipolar cycloaddition, the reaction order (2) was deduced from it.

  7. Analysis Code for High Gradient Dielectric Insulator Surface Breakdown

    Energy Technology Data Exchange (ETDEWEB)

    Ives, Robert Lawrence [Calabazas Creek Research, Inc.; Verboncoeur, John [University of California - Berkeley; Aldan, Manuel [University of California, Berkeley

    2010-05-30

    High voltage (HV) insulators are critical components in high-energy, accelerator and pulsed power systems that drive diverse applications in the national security, nuclear weapons science, defense and industrial arenas. In these systems, the insulator may separate vacuum/non-vacuum regions or conductors with high electrical field gradients. These insulators will often fail at electric fields over an order of magnitude lower than their intrinsic dielectric strength due to flashover at the dielectric interface. Decades of studies have produced a wealth of information on fundamental processes and mechanisms important for flashover initiation, but only for relatively simple insulator configurations in controlled environments. Accelerator and pulsed power system designers are faced with applying the fundamental knowledge to complex, operational devices with escalating HV requirements. Designers are forced to rely on “best practices” and expensive prototype testing, providing boundaries for successful operation. However, the safety margin is difficult to estimate, and system design must be very conservative for situations where testing is not practicable, or replacement of failed parts is disruptive or expensive. The Phase I program demonstrated the feasibility of developing an advanced code for modeling insulator breakdown. Such a code would be of great interest for a number of applications, including high energy physics, microwave source development, fusion sciences, and other research and industrial applications using high voltage devices.

  8. A transferable force field to predict phase equilibria and surface tension of ethers and glycol ethers.

    Science.gov (United States)

    Ferrando, Nicolas; Lachet, Véronique; Pérez-Pellitero, Javier; Mackie, Allan D; Malfreyt, Patrice; Boutin, Anne

    2011-09-15

    We propose a new transferable force field to simulate phase equilibrium and interfacial properties of systems involving ethers and glycol ethers. On the basis of the anisotropic united-atom force field, only one new group is introduced: the ether oxygen atom. The optimized Lennard-Jones (LJ) parameters of this atom are identical whatever the molecule simulated (linear ether, branched ether, cyclic ether, aromatic ether, diether, or glycol ether). Accurate predictions are achieved for pure compound saturated properties, critical properties, and surface tensions of the liquid-vapor interface, as well as for pressure-composition binary mixture diagrams. Multifunctional molecules (1,2-dimethoxyethane, 2-methoxyethanol, diethylene glycol) have also been studied using a recently proposed methodology for the calculation of the intramolecular electrostatic energy avoiding the use of additional empirical parameters. This new force field appears transferable for a wide variety of molecules and properties. It is furthermore worth noticing that binary mixtures have been simulated without introducing empirical binary parameters, highlighting also the transferability to mixtures. Hence, this new force field gives future opportunities to simulate complex systems of industrial interest involving molecules with ether functions.

  9. Influence of the local morphology on the surface tension of injection molded polypropylene

    Science.gov (United States)

    Gomes, M.; Pontes, A. J.; Viana, J. C.

    2014-05-01

    In this work, we investigate the development of the morphology of an injection molding polypropylene under the local thermomechanical environment imposed during processing, and its effect on the contact angle and, hence, on the surface tension of the moldings. Melt and mold temperatures were varied in two levels. The local thermomechanical environment was characterized by mold filling computational simulations that allow the calculation of thermomechanical variables (e.g., local temperatures, shear stresses) and indices (related to the local morphology development). In order to investigate the structural hierarchy variations of the moldings in the thickness direction, samples from skin to core were used. The molecular orientation and degree of crystallinity were determined as function of the thickness, as well as the contact angle. The variations of the degree of crystallinity were assessed by differential scanning calorimetry. The level of molecular orientation was evaluated by birefringence measurements. The contact angles were measured in deionized water by sessile drop (needle in) method at room temperature, to determine the wettability of the samples. The contact angles were found to vary along the molding thickness in the skin, transition and core layers. These variations are related to the local morphologies developed. Results suggest that water contact angle increases with the level of molecular orientation and for finer microstructures.

  10. The self-interaction of a fluid interface, the wavevector dependent surface tension and wedge filling

    Science.gov (United States)

    Parry, Andrew O.; Rascón, Carlos

    2011-01-01

    We argue that whenever an interface, separating bulk fluid phases, adopts a non-planar configuration (induced by a confining geometry or thermal fluctuations, say), the energy cost of it will contain a non-local self-interaction term. For systems with short-ranged forces and Ising symmetry, we determine the self-interaction by integrating out bulk-like degrees of freedom from a more microscopic Landau-Ginzburg-Wilson model. The self-interaction can be written in a simple diagrammatic form involving integrals over effective two-body forces acting at the interface and consistently accounts for a number of known features of the microscopic model, including the wavevector dependence of the surface tension describing the fluctuations of a near planar interface. When applied to wedge filling transitions, the self-interaction describes the attraction between the wetting films on either side of the wedge. We show that, for sufficiently acute wedges, this can alter the order of the filling phase transition.

  11. The self-interaction of a fluid interface, the wavevector dependent surface tension and wedge filling

    Energy Technology Data Exchange (ETDEWEB)

    Parry, Andrew O [Department of Mathematics, Imperial College London, London SW7 2BZ (United Kingdom); Rascon, Carlos [Grupo Interdisciplinar de Sistemas Complejos (GISC), Departamento de Matematicas, Universidad Carlos III de Madrid, 28911 Leganes, Madrid (Spain)

    2011-01-12

    We argue that whenever an interface, separating bulk fluid phases, adopts a non-planar configuration (induced by a confining geometry or thermal fluctuations, say), the energy cost of it will contain a non-local self-interaction term. For systems with short-ranged forces and Ising symmetry, we determine the self-interaction by integrating out bulk-like degrees of freedom from a more microscopic Landau-Ginzburg-Wilson model. The self-interaction can be written in a simple diagrammatic form involving integrals over effective two-body forces acting at the interface and consistently accounts for a number of known features of the microscopic model, including the wavevector dependence of the surface tension describing the fluctuations of a near planar interface. When applied to wedge filling transitions, the self-interaction describes the attraction between the wetting films on either side of the wedge. We show that, for sufficiently acute wedges, this can alter the order of the filling phase transition.

  12. The utilization of round window membrane surface tension in facilitating slim electrodes insertion during cochlear implantation.

    Science.gov (United States)

    Nada, Ihab; Abdelhamid, Ahmed Nabil; Negm, Ahmed

    2017-06-24

    This is a prospective randomized study aimed to evaluate the round window membrane (RWM) surface tension in facilitating slim electrodes insertion during cochlear implantation. A total number of (118) children were included in this study (118 implantations). Mean age was 36.72 months (range from 18 to 60 months). This study was conducted from January 2015 to September 2016 at a cochlear implant centre in a tertiary referral hospital. Slit incision in the anterosuperior quadrant of the RWM was done in 70 cases, While RWM cruciate incision was done in 48 cases. Of the 48 patients who underwent RWM cruciate incision, 13 cases had no problem, while in 35 cases, we faced difficult insertion. When slit incision of the RWM was done (70 cases), 68 cases showed smooth insertion, meanwhile, we faced increased operative time due to flopping of the electrode in 2 cases only. Moreover, residual low-frequency hearing preservation was more achieved when slit incision of the RWM was done. Tensile strength of the round window membrane after slit incision of the RWM offers support to slim electrodes during introduction, decreasing incidence of kinking and floppiness, hence shortening the maneuver time and minimizing the number of trials. This facilitates easy smooth slim electrodes introduction, decreasing intracochlear trauma. Moreover, slit incision of the RWM may offer better residual hearing preservations than cruciate incision of the RWM during slim electrodes introduction.

  13. Pressure and surface tension of soild-liquid interface using Tarazona density functional theory

    Directory of Open Access Journals (Sweden)

    M. M.

    2000-12-01

    Full Text Available   The weighted density functional theory proposed by Tarazona is applied to study the solid-liquid interface. In the last two decades the weighted density functional became a useful tool to consider the properties of inhomogeneous liquids. In this theory, the role of the size of molecules or the particles of which the matter is composed, was found to be important. In this resarch we study a hard sphere fluid beside a hard wall. For this study the liquid is an inhomogeneous system. We use the definition of the direct correlation function as a second derivative of free energy with respect to the density. We use this definition and the definition of the weighting function, then we minimize the grand potential with respect to the density to get the Euler Lagrange equation and we obtain an integral equation to find the inhomogeneous density profile. The obtained density profile as a function of the distance from the wall, for different bulk density is plotted in three dimensions. We also calculate the pressure and compare it with the Carnahan-starling results, and finally we obtained the surface tension at liquid-solid interface and compared it with the results of Monte Carlo simulation.

  14. The self-interaction of a fluid interface, the wavevector dependent surface tension and wedge filling.

    Science.gov (United States)

    Parry, Andrew O; Rascón, Carlos

    2011-01-12

    We argue that whenever an interface, separating bulk fluid phases, adopts a non-planar configuration (induced by a confining geometry or thermal fluctuations, say), the energy cost of it will contain a non-local self-interaction term. For systems with short-ranged forces and Ising symmetry, we determine the self-interaction by integrating out bulk-like degrees of freedom from a more microscopic Landau-Ginzburg-Wilson model. The self-interaction can be written in a simple diagrammatic form involving integrals over effective two-body forces acting at the interface and consistently accounts for a number of known features of the microscopic model, including the wavevector dependence of the surface tension describing the fluctuations of a near planar interface. When applied to wedge filling transitions, the self-interaction describes the attraction between the wetting films on either side of the wedge. We show that, for sufficiently acute wedges, this can alter the order of the filling phase transition.

  15. New procedure to measure simultaneously the surface tension and contact angle

    Science.gov (United States)

    Champmartin, S.; Ambari, A.; Le Pommelec, J. Y.

    2016-05-01

    This paper proposes a new procedure to simultaneously measure the static contact angle and the surface tension of a liquid using a spherical geometry. Unlike the other existing methods, the knowledge of one of both previous parameters and the displacement of the sphere are not mandatory. The technique is based on the measurement of two simple physical quantities: the height of the meniscus formed on a sphere at the very contact with a liquid bath and the resulting vertical force exerted on this object at equilibrium. The meniscus height, whose exact value requires the numerical resolution of the Laplace equation, is often estimated with an approximate 2D model, valid only for very large spheres compared to the capillary length. We develop instead another simplified solution of the Young-Laplace equation based on the work of Ferguson for the meniscus on a cylinder and adapted for the spherical shape. This alternative model, which is less restrictive in terms of the sphere size, is successfully compared to numerical solutions of the complete Young-Laplace equation. It appears to be accurate for sphere radii larger than only two capillary lengths. Finally the feasibility of the method is experimentally tested and validated for three common liquids and two "small" steel spheres.

  16. Surface strain gradient effects in the torsion of a circular bar with radial cracks

    Science.gov (United States)

    Xu, Yang; Wang, Xu

    2016-12-01

    We study the contribution of surface strain gradient elasticity to the Saint-Venant torsion problem of a circular cylinder containing a radial crack. The surface strain gradient elasticity is incorporated by using an enriched version of the continuum-based surface/interface model of Gurtin and Murdoch. By using Green's function method, the original boundary value problem is reduced to a Cauchy singular integro-differential equation which can be numerically solved by using the Gauss-Chebyshev integration formula, the Chebyshev polynomials and the collocation method. Due to the presence of surface strain gradient elasticity on the crack faces, the stresses are bounded at the crack tips. The torsion problem of a circular cylinder containing two symmetric collinear radial cracks of equal length with surface strain gradient elasticity is also solved by using a similar method. Numerical results indicate that the surface strain gradient effect exerts a significant influence on the torsional rigidity and the jump in warping function. In particular, the jump in warping function forms a cusp shape with zero enclosed angle at the crack tips.

  17. Reactive monolayers for surface gradients and biomolecular patterned interfaces

    NARCIS (Netherlands)

    Nicosia, C.

    2013-01-01

    Self-assembled monolayers (SAMs) are an excellent platform to implement and develop interfacial reactions for the preparation of versatile materials of pivotal importance for the fabrication of, among others, biochips, sensors, catalysts, smart surfaces and electronic devices. The development of met

  18. Effect of surface tension on a liquid-jet produced by the collapse of a laser-induced bubble against a rigid boundary

    Science.gov (United States)

    Liu, Xiu Mei; He, Jie; Lu, Jian; Ni, Xiao Wu

    2009-02-01

    The effect of surface tension on the behavior of a liquid-jet is investigated experimentally by means of a fiber-coupled optical beam deflection (OBD) technique. It is found that a target under water is impacted in turn by a laser-plasma ablation force and by a high-speed liquid-jet impulse induced by bubble collapse in the vicinity of a rigid boundary. The liquid-jet impact is found to be the main damage mechanism in cavitation erosion. Furthermore, the liquid-jet increases monotonously with surface tension, so cavitation erosion rises sharply with increasing surface tension. Surface tension also reduces bubble collapse duration. From the experimental results and the modified Rayleigh theory, the maximum bubble radius is obtained and it is found to reduce with increasing surface tension.

  19. Assessment of Numerical Treatments in Interface Capturing Simulations for Surface-Tension-Driven Interface Motion

    Directory of Open Access Journals (Sweden)

    Abhinav Dhar

    2015-03-01

    Full Text Available Effects of numerical treatments for the surface tension evaluation on predictions of the motions of droplets ranging from micron to sub-micron meters were investigated. Various combinations of schemes for evaluating the normal to the interface and interface curvature were examined, i.e. the ALE (arbitrary Lagrangian-eulerian like scheme and BFA (balanced-force algorithm for the normal vector and CSF (continuum surface force and HF (height function for the interface curvature. The interface motion was predicted using THAINC (tangent of hyperbola with adaptive slope for interface capturing proposed in our previous study. Numerical errors in pressure and velocity were examined for neutrally buoyant drops of 1 mm in radius to validate the code, which confirmed that the results were similar to those reported in literature: the combination of BFA and HF gave the lowest errors. The droplet size was reduced to 0.1 mm to investigate the accuracy of the schemes for droplet sizes found in industrial coating processes. The static contact angle was then taken into account in the code. The effect of implementation on the errors was examined. The reduction of droplet sizes and implementation of contact angle had no substantial effect on the order of errors. A model for the dynamic contact angle was also implemented and the wetting behaviour of a drop of 1.14 mm in radius was well predicted. Finally a simulation of the wetting behaviour of a sub-micron meter droplet demonstrated that the present code combining BFA, HF and the dynamic contact angle model is accurate in predicting the motion of sub-micron meter droplets.

  20. Investigations of the surface tension of coal ash slags under gasification conditions; Untersuchungen zur Oberflaechenspannung von Kohleschlacken unter Vergasungsbedingungen

    Energy Technology Data Exchange (ETDEWEB)

    Melchior, Tobias

    2011-10-26

    In the context of CO{sub 2}-emission-induced global warming, greenhouse gases resulting from the production of electricity in coal-fired power plants gain increasing attention. One possible way to reduce such emissions is to gasify coal instead of burning it. The corresponding process is referred to as Integrated Gasification Combined Cycle and allows for the separation of CO{sub 2} before converting a synthesis gas into electrical energy. However, further improvements in efficiency and availability of this plant technology are needed to render the alternative generation of electricity sensible from an economic point of view. One corresponding approach introduces hot gas cleaning facilities to the gasification plant which guarantee a removal of slag particles from the synthesis gas at high temperatures. The development of such filters depends on the availability of data on the material properties of the coal ash slags to be withdrawn. In this respect, the surface tension is a relevant characteristic. Currently, the surface tension of real coal ash slags as well as of synthetic model systems was measured successfully by means of the sessile drop and the maximum bubble pressure method. With regard to the sessile drop technique, those experiments were conducted in a gasification-like atmosphere at temperatures of up to 1500 C. Furthermore, the pressure inside the experimental vessel was raised to 10 bar in order to allow for deriving the influence of this variable on the surface tension. In contrast, maximum bubble pressure trials were realised at atmospheric pressure while the gas atmosphere assured inert conditions. For performing sessile drop measurements, a corresponding apparatus was set up and is described in detail in this thesis. Three computer algorithms were employed to calculate surface tensions out of the photos of sessile drops and their individual performance was evaluated. A very good agreement between two of the codes was found while the third one

  1. Hot-forging Die Cavity Surface Layer Temperature Gradient Distribution and Determinant

    Institute of Scientific and Technical Information of China (English)

    WANG Huachang; WANG Guan; XIAO Han; WANG Hongfu

    2011-01-01

    Based on the car front-wheel-hub forging forming process of numerical simulation,the temperature gradient expression of forging model cavity near the surface layer was got ten,which illustrates that the forging temperature gradient is related to forging die materials thermal conductivity,specific heat and impact speed,and the correlation coefficient is 0.97.Under the different thermal conductivity,heat capacity and forging speed,the temperature gradient was compared with each other.The paper obtained the relevant laws,which illustrates the temperature gradient relates to these three parameters in a sequence of thermal conductivity > impact speed> specific heat capacity.To reduce thermal stress in the near-surface layer of hot forging cavity,the material with greater thermal conductivity coefficient and specific heat capacity should be used.

  2. Changes in zonal surface temperature gradients and Walker circulations in a wide range of climates

    CERN Document Server

    Merlis, Timothy M

    2010-01-01

    Variations in zonal surface temperature gradients and zonally asymmetric tropical overturning circulations (Walker circulations) are examined over a wide range of climates simulated with an idealized atmospheric general circulation model (GCM). The asymmetry in the tropical climate is generated by an imposed ocean energy flux, which does not vary with climate. The range of climates is simulated by modifying the optical thickness of an idealized longwave absorber (representing greenhouse gases). The zonal surface temperature gradient in low latitudes generally decreases as the climate warms in the idealized GCM simulations. A scaling relationship based on a two-term balance in the surface energy budget accounts for the changes in the zonally asymmetric component of the GCM-simulated surface temperature gradients. As in comprehensive simulations of climate change, the Walker circulation weakens as the climate warms in the idealized simulations. The wide range of climates allows a systematic test of energetic ar...

  3. Surface profile and stress field evaluation using digital gradient sensing method

    Science.gov (United States)

    Miao, C.; Sundaram, B. M.; Huang, L.; Tippur, H. V.

    2016-09-01

    Shape and surface topography evaluation from measured orthogonal slope/gradient data is of considerable engineering significance since many full-field optical sensors and interferometers readily output such a data accurately. This has applications ranging from metrology of optical and electronic elements (lenses, silicon wafers, thin film coatings), surface profile estimation, wave front and shape reconstruction, to name a few. In this context, a new methodology for surface profile and stress field determination based on a recently introduced non-contact, full-field optical method called digital gradient sensing (DGS) capable of measuring small angular deflections of light rays coupled with a robust finite-difference-based least-squares integration (HFLI) scheme in the Southwell configuration is advanced here. The method is demonstrated by evaluating (a) surface profiles of mechanically warped silicon wafers and (b) stress gradients near growing cracks in planar phase objects.

  4. A miniature surface tension-driven robot using spatially elliptical moving legs to mimic a water strider's locomotion.

    Science.gov (United States)

    Yan, J H; Zhang, X B; Zhao, J; Liu, G F; Cai, H G; Pan, Q M

    2015-08-04

    The highly agile and efficient water-surface locomotion of the water strider has stimulated substantial interest in biomimetic research. In this paper, we propose a new miniature surface tension-driven robot inspired by the water strider. A key feature of this robot is that its actuating leg possesses an ellipse-like spatial trajectory similar to that of a water strider by using a cam-link mechanism. Simplified models are presented to discuss the leg-water interactions as well as critical conditions for a leg penetrating the water surface, and simulations are performed on the robot's dynamic properties. The final fabricated robot weighs about 3.9 g, and can freely and stably walk on water at different gaits. The maximum forward and turning speeds of the robot are measured as 16 cm s(-1) and 23°/s, respectively. Furthermore, a similarity analysis with Bond number and Weber number demonstrates that the locomotion of this robot is quite analogous to that of a real water strider: the surface tension force dominates the lifting force and plays a major role in the propulsion force. This miniature surface tension-driven robot might have potential applications in many areas such as water quality monitoring and aquatic search and rescue.

  5. Reactive processing of formaldehyde and acetaldehyde in aqueous aerosol mimics: Surface tension depression and secondary organic products

    CERN Document Server

    Li, Zhi; Sareen, Neha; McNeill, V Faye

    2011-01-01

    The reactive uptake of carbonyl-containing volatile organic compounds (cVOCs) by aqueous atmospheric aerosols is a likely source of particulate organic material. The aqueous-phase secondary organic products of some cVOCs are surface-active. Therefore, cVOC uptake can lead to organic film formation at the gas-aerosol interface and changes in aerosol surface tension. We examined the chemical reactions of two abundant cVOCs, formaldehyde and acetaldehyde, in water and aqueous ammonium sulfate (AS) solutions mimicking tropospheric aerosols. Secondary organic products were identified using Aerosol Chemical Ionization Mass Spectrometry (Aerosol-CIMS), and changes in surface tension were monitored using pendant drop tensiometry. Hemiacetal oligomers and aldol condensation products were identified using Aerosol-CIMS. A hemiacetal sulfate ester was tentatively identified in the formaldehyde-AS system. Acetaldehyde depresses surface tension to 65(\\pm2) dyn/cm in pure water and 62(\\pm1) dyn/cm in AS solutions. Surface t...

  6. Condensation on surface energy gradient shifts drop size distribution toward small drops.

    Science.gov (United States)

    Macner, Ashley M; Daniel, Susan; Steen, Paul H

    2014-02-25

    During dropwise condensation from vapor onto a cooled surface, distributions of drops evolve by nucleation, growth, and coalescence. Drop surface coverage dictates the heat transfer characteristics and depends on both drop size and number of drops present on the surface at any given time. Thus, manipulating drop distributions is crucial to maximizing heat transfer. On earth, manipulation is achieved with gravity. However, in applications with small length scales or in low gravity environments, other methods of removal, such as a surface energy gradient, are required. This study examines how chemical modification of a cooled surface affects drop growth and coalescence, which in turn influences how a population of drops evolves. Steam is condensed onto a horizontally oriented surface that has been treated by silanization to deliver either a spatially uniform contact angle (hydrophilic, hydrophobic) or a continuous radial gradient of contact angles (hydrophobic to hydrophilic). The time evolution of number density and associated drop size distributions are measured. For a uniform surface, the shape of the drop size distribution is unique and can be used to identify the progress of condensation. In contrast, the drop size distribution for a gradient surface, relative to a uniform surface, shifts toward a population of small drops. The frequent sweeping of drops truncates maturation of the first generation of large drops and locks the distribution shape at the initial distribution. The absence of a shape change indicates that dropwise condensation has reached a steady state. Previous reports of heat transfer enhancement on chemical gradient surfaces can be explained by this shift toward smaller drops, from which the high heat transfer coefficients in dropwise condensation are attributed to. Terrestrial applications using gravity as the primary removal mechanism also stand to benefit from inclusion of gradient surfaces because the critical threshold size required for

  7. Mass transfer in fuel cells. [electron microscopy of components, thermal decomposition of Teflon, water transport, and surface tension of KOH solutions

    Science.gov (United States)

    Walker, R. D., Jr.

    1973-01-01

    Results of experiments on electron microscopy of fuel cell components, thermal decomposition of Teflon by thermogravimetry, surface area and pore size distribution measurements, water transport in fuel cells, and surface tension of KOH solutions are described.

  8. Molecular Dynamics Simulation of Surface Tension of NaCl Aqueous Solution at 298.15K: from Diluted to Highly Supersaturated Concentrations

    Science.gov (United States)

    Wang, Xiaoxiang; Chen, Chuchu; Poeschl, Ulirch; Su, Hang; Cheng, Yafang

    2017-04-01

    Sodium chloride (NaCl) is one of the key components of atmospheric aerosol particles. Concentration-depend surface tension of aqueous NaCl solution is essential to determine the equilibrium between droplet NaCl solution and water vapor, which is important in regards to aerosol-cloud interaction and aerosol climate effects. Although supersaturated NaCl droplets can be widely found under atmospheric conditions, the experimental determined concentration dependency of surface tension is limited up to the saturated concentration range due to technical difficulties, i.e., heterogeneous nucleation since nearly all surface tension measurement techniques requires contact of the sensor and solution surface. In this study, the surface tension of NaCl aqueous solution with solute mass fraction from 0 to 1 was calculated using molecular dynamics (MD) simulation. The surface tension increases monotonically and near linearly when mass fraction of NaCl (xNaCl) is lower than 0.265 (saturation point), which follows theoretical predictions (e.g., E-AIM, SP parameterization, and PK parameterization). Once entering into the supersaturated concentration range, the calculated surface tension starts to deviate from the near-linear extrapolation and adopts a slightly higher increasing rate until xNaCl of 0.35. We found that these two increasing phases (xNaCl 0.35) is mainly driven by the increase of excessive surface enthalpy when the solution becomes concentrated. After that, the surface tension remains almost unchanged until xNaCl of 0.52. This phenomenon is supported by the results from experiment based Differential Koehler Analyses. The stable surface tension in this concentration range is attributed to a simultaneous change of surface excess enthalpy and entropy at similar degree. When the NaCl solution is getting more concentrated than xNaCl of 0.52, the simulated surface tension regains an even faster growing momentum and shows the tendency of ultimately approaching the surface

  9. Wetting Angles and Surface Tension of Ge(1-x)Si(x) Melts on Different Substrate Materials

    Science.gov (United States)

    Croell, A.; Kaiser, N.; Szofran, F. R.; Cobb, S. D.; Volz, M. P.; Curreri, Peter A. (Technical Monitor)

    2002-01-01

    The wetting angles and the surface tension of Ge(1-x)Si(x) melts (0.02 less than x less than 0.13) have been measured on various substrate materials using the sessile drop technique. Fused quartz, sapphire, SiC, glassy carbon, pBN, AIN, and Si3N4 have been used as substrates. The highest and most stable wetting angles were found for pBN substrates with 164 +/- 8 deg., either under forming gas with an additional carbon getter in the system or under active vacuum. The surface tension measurements resulted in a value of +2.2 x 10(exp -3) N/m.at%Si for the concentration dependence delta(gamma)/(delta)C. For the composition range measured, the temperature dependence (delt)gamma/(delta)T showed values similar to those of pure Ge, on average -0.07 x 10(exp -3) N/mK.

  10. Influence of Zinc on the Surface Tension, Density and Molar Volume of (Ag-Sneut +Zn Liquid Alloys

    Directory of Open Access Journals (Sweden)

    Gąsior W.

    2016-03-01

    Full Text Available The dilatometric and maximum bubble pressure methods were applied for the measurements of the density and surface tension of liquid (Ag-Sneut +Zn lead-free solders. The experiments were carried out in the temperature range from 515 to 1223 K for the alloys of the zinc concentration equaling 0.01, 0.02, 0.04, 0.05, 0.1 and 0.2 of the mole fraction. It was found that the temperature dependence of both the density and the surface tension could be thought as linear, so they were interpreted by straight line equations. The experimental data of the molar volume of the investigated alloys were described by the polynomial dependent on the composition and temperature.

  11. The effect of a curvature-dependent surface tension on the singularities at the tips of a straight interface crack

    KAUST Repository

    Zemlyanova, A. Y.

    2013-03-08

    A problem of an interface crack between two semi-planes made out of different materials under an action of an in-plane loading of general tensile-shear type is treated in a semi-analytical manner with the help of Dirichlet-to-Neumann mappings. The boundaries of the crack and the interface between semi-planes are subjected to a curvature-dependent surface tension. The resulting system of six singular integro-differential equations is reduced to the system of three Fredholm equations. It is shown that the introduction of the curvature-dependent surface tension eliminates both classical integrable power singularity of the order 1/2 and an oscillating singularity present in a classical linear elasticity solutions. The numerical results are obtained by solving the original system of singular integro-differential equations by approximating unknown functions with Taylor polynomials. © 2013 The Author.

  12. Growth of a Gas Bubble in a Supersaturated Liquid Under the Effect of Variant Cases of Surface Tension

    Science.gov (United States)

    Mohammadein, S. A.; Mohamed, K. G.

    In this paper, the growth of a gas bubble in a supersaturated liquid is discussed for a constant and variable cases of surface tension effect. The mathematical model is solved analytically by using the method of Plesset and Zwick18 after modified it. The growth process is affected by: diffusion coefficient D, Jacob number Ja, surface tension σ, adjustment factor b and void fraction ϕ0. The famous formula of Plesset and Zwick is produced as a special case of the results at some values of the adjustment factors. Moreover, for some values of the adjustment factors, good approximation is obtained when a comparison between our results and the result that produced by Hashemi et al., 9 who solved the problem with the method of combining variables.

  13. Full gradient stabilized cut finite element methods for surface partial differential equations

    Science.gov (United States)

    Burman, Erik; Hansbo, Peter; Larson, Mats G.; Massing, André; Zahedi, Sara

    2016-10-01

    We propose and analyze a new stabilized cut finite element method for the Laplace-Beltrami operator on a closed surface. The new stabilization term provides control of the full $\\mathbb{R}^3$ gradient on the active mesh consisting of the elements that intersect the surface. Compared to face stabilization, based on controlling the jumps in the normal gradient across faces between elements in the active mesh, the full gradient stabilization is easier to implement and does not significantly increase the number of nonzero elements in the mass and stiffness matrices. The full gradient stabilization term may be combined with a variational formulation of the Laplace-Beltrami operator based on tangential or full gradients and we present a simple and unified analysis that covers both cases. The full gradient stabilization term gives rise to a consistency error which, however, is of optimal order for piecewise linear elements, and we obtain optimal order a priori error estimates in the energy and $L^2$ norms as well as an optimal bound of the condition number. Finally, we present detailed numerical examples where we in particular study the sensitivity of the condition number and error on the stabilization parameter.

  14. Low-Bond Axisymmetric Drop Shape Analysis for Surface Tension and Contact Angle Measurements of Sessile Drops

    OpenAIRE

    Stalder, A.F.; Melchior, T.; Müller, M.; Sage, D; T. Blu; Unser, M

    2010-01-01

    A new method based on the Young-Laplace equation for measuring contact angles and surface tensions is presented. In this approach, a first-order perturbation technique helps to analytically solve the Young-Laplace equation according to photographic images of axisymmetric sessile drops. When appropriate, the calculated drop contour is extended by mirror symmetry so that reflection of the drop into substrate allows the detection of position of the contact points. To keep a wide range of applica...

  15. Conditions necessary for capillary hysteresis in porous media: Tests of grain-size and surface tension influences

    OpenAIRE

    Tokunaga, Tetsu K.; Olson, Keith R.; Wan, Jiamin

    2004-01-01

    Hysteresis in the relation between water saturation and matric potential is generally regarded as a basic aspect of unsaturated porous media. However, the nature of an upper length scale limit for saturation hysteresis has not been previously addressed. Since hysteresis depends on whether or not capillary rise occurs at the grain scale, this criterion was used to predict required combinations of grain size, surface tension, fluid-fluid density differences, and acceleration in monodisper...

  16. Wetting and Interfacial Tension Dynamics of Oil-Nanofluids-Surface Minerals System

    Science.gov (United States)

    Bai, L.; Li, C.; Darnault, C. J. G.; Korte, C.; Ladner, D.; Daigle, H.

    2015-12-01

    Among the techniques used in enhanced oil recovery (EOR), chemical injection involves the injection of surfactants to increase the oil mobility and decrease the interfacial tension (IFT). With the nanotechnology revolution, the use of nanoparticles has shown unique opportunities in petroleum engineering due to their physico-chemical properties. Our research examines the potential application of nanoparticles as a means of EOR by studying the influence of silicon oxide nanoparticles on the wettability and IFT of oil-nanofluids-surface systems. Batch studies were conducted to assess the stability of the nanoparticle suspensions of different concentrations (0, 0.001, 0.005, 0.01, 0.05 and 0.1 wt. %) in different reservoir conditions with and without the addition of surfactants (i.e. 5% brine, and Tween 20 at 0.5 and 2 cmc). Testing of oil-nanofluids and oil-nanofluids-minerals interactions was performed using crude oils from West Texas (light, API 40), Prudhoe Bay (medium, API 28), and Lloydminster (heavy, API 20). The dynamic behavior of IFT was measured using a pendant drop method. Results for 5% brine-nanoparticle systems indicated that 0.001 and 0.01 wt.% of nanoparticles contributed to a significant decrease of IFT for West Texas and Prudhoe Bay oils, while the highest decrease of IFT for Lloydminster was reported with 0.1 wt.% nanoparticles. IFT decrease was also enhanced by surfactant, and the addition of nanoparticles at 0.001 wt.% to surfactant resulted in significant decrease of IFT in most of the tested oil-nanofluid systems. The sessile drop method was used to measure the dynamic behavior of the contact angle of these oil droplets on minerals surface made of thin sections from Berea and Boise sandstone cores through a wetting test. Different nanofluid and surfactant concentrations were tested for the optimization of changes in wettability, which is a critical phase in assessing the behavior of nanofluids for optimal EOR with the selected crude oils.

  17. Engineering optical gradient force from coupled surface plasmon polariton modes in nanoscale plasmonic waveguides

    Science.gov (United States)

    Lu, Jiahui; Wang, Guanghui

    2016-11-01

    We explore the dispersion properties and optical gradient forces from mutual coupling of surface plasmon polariton (SPP) modes at two interfaces of nanoscale plasmonic waveguides with hyperbolic metamaterial cladding. With Maxwell’s equations and Maxwell stress tensor, we calculate and compare the dispersion relation and optical gradient force for symmetric and antisymmetric SPP modes in two kinds of nanoscale plasmonic waveguides. The numerical results show that the optical gradient force between two coupled hyperbolic metamaterial waveguides can be engineered flexibly by adjusting the waveguide structure parameters. Importantly, an alternative way to boost the optical gradient force is provided through engineering the hyperbolic metamaterial cladding of suitable orientation. These special optical properties will open the door for potential optomechanical applications, such as optical tweezers and actuators. Project supported by the National Natural Science Foundation of China (Grant No. 11474106) and the Natural Science Foundation of Guangdong Province, China (Grant No. 2016A030313439).

  18. 梯度接触角表面的构建与应用%Construction and Application of Wettability Gradient Surfaces

    Institute of Scientific and Technical Information of China (English)

    张勇; 皮丕辉; 文秀芳; 郑大锋; 蔡智奇; 程江

    2011-01-01

    梯度接触角是梯度表面张力的反映,固体表面的润湿性由表面化学组成和表面微观形貌共同决定。通过表面化学组成和表面微观形貌的梯度化,可制备接触角变化范围不同的梯度接触角表面。本文综述了梯度接触角表面在液滴移动、微流体流动和生物吸附等领域中的应用。梯度接触角表面具有的不平衡杨氏力是促进液滴移动的主要原因,而表面所产生的接触角滞后则阻碍液滴移动;在生物学领域,梯度接触角表面会造成蛋白质和细胞选择性吸附或黏附。最后,简要探讨了梯度接触角表面存在的问题和发展方向。%A gradient wettability surface is the one that displays a gradual change in its surface tension along its length.The wettability of solid surfaces is governed by both the surface chemical composition and the geometrical microstructure.In this paper,two ways to fabricate the wettability gradient surfaces,controlling the chemical composition or surface morphology along the surfaces are introduced,and the application of the functional wettability surfaces,such as droplet moving,micro-fluid flow,and biosorption has been presented.The dominant force responsible for drop movement is the unbalanced Young force that results from the difference in wettability between the front and backsides of the drop,and the contact angle hysteresis has a reduced effect on the droplet moving.Generally speaking,the higher the gradient,the faster the droplet moved.The wettability gradient surfaces are also used for control of liquids flow on submillimeter scales.In addition,surface wettability is found to play an important role in biosorption and the difference in protein adsorption behavior can be attributed mainly to the wettability gradient and the type of protein.Problems existed in this research field and prospects of wettability gradient surfaces are also discussed briefly.

  19. Multiphase Allen-Cahn and Cahn-Hilliard models and their discretizations with the effect of pairwise surface tensions

    Science.gov (United States)

    Wu, Shuonan; Xu, Jinchao

    2017-08-01

    In this paper, the mathematical properties and numerical discretizations of multiphase models that simulate the phase separation of an N-component mixture are studied. For the general choice of phase variables, the unisolvent property of the coefficient matrix involved in the N-phase models based on the pairwise surface tensions is established. Moreover, the symmetric positive-definite property of the coefficient matrix on an (N - 1)-dimensional hyperplane - which is of fundamental importance to the well-posedness of the models - can be proved equivalent to some physical condition for pairwise surface tensions. The N-phase Allen-Cahn and N-phase Cahn-Hilliard equations can then be derived from the free-energy functional. A natural property is that the resulting dynamics of concentrations are independent of phase variables chosen. Finite element discretizations for N-phase models can be obtained as a natural extension of the existing discretizations for the two-phase model. The discrete energy law of the numerical schemes can be proved and numerically observed under some restrictions pertaining to time step size. Numerical experiments including the spinodal decomposition and the evolution of triple junctions are described in order to investigate the effect of pairwise surface tensions.

  20. Thermocapillary-driven motion of a sessile drop: effect of non-monotonic dependence of surface tension on temperature.

    Science.gov (United States)

    Karapetsas, George; Sahu, Kirti Chandra; Sefiane, Khellil; Matar, Omar K

    2014-04-22

    We study the thermocapillary-driven spreading of a droplet on a nonuniformly heated substrate for fluids associated with a non-monotonic dependence of the surface tension on temperature. We use lubrication theory to derive an evolution equation for the interface that accounts for capillarity and thermocapillarity. The contact line singularity is relieved by using a slip model and a Cox-Voinov relation; the latter features equilibrium contact angles that vary depending on the substrate wettability, which, in turn, is linked to the local temperature. We simulate the spreading of droplets of fluids whose surface tension-temperature curves exhibit a turning point. For cases wherein these turning points correspond to minima, and when these minima are located within the droplet, then thermocapillary stresses drive rapid spreading away from the minima. This gives rise to a significant acceleration of the spreading whose characteristics resemble those associated with the "superspreading" of droplets on hydrophobic substrates. No such behavior is observed for cases in which the turning point corresponds to a surface tension maximum.

  1. Surface tensions, densities and refractive indexes of mixtures of dibutyl ether and 1-alkanol at T=298.15 K

    Energy Technology Data Exchange (ETDEWEB)

    Rilo, Esther; Freire, Sonia; Segade, Luisa; Cabeza, Oscar. E-mail: oscabe@udc.es; Franjo, Carlos; Jimenez, Eulogio

    2003-05-01

    The aim of our present work is to present measurements of the surface tension, density and refractive index for binary mixtures of dibutyl ether with eight 1-alcohols {l_brace}C{sub 4}H{sub 9}OC{sub 4}H{sub 9}+C{sub 3}H{sub 7}OH,+C{sub 4}H{sub 9}OH,+C{sub 5}H{sub 11}OH,+C{sub 6}H{sub 13}OH,+C{sub 7}H{sub 15}OH,+C{sub =} 8H{sub 17}OH,+C{sub 9}H{sub 19}OH and +C{sub 10}H{sub 21}OH{r_brace} at the temperature of 298.15 K and atmospheric pressure. The experimental data are correlated by means of suitable empirical expressions, which relate the surface tension and refractive index of a mixture with its corresponding density. Also, calculated are the surface tension deviations and excess molar volumes from the measured data for all binary mixtures. The results of the study attending to the number of carbon atoms of the 1-alcohol are discussed.

  2. Improvements of the experimental apparatus for measurement of the surface tension of supercooled liquids using horizontal capillary tube

    Directory of Open Access Journals (Sweden)

    Vinš Václav

    2016-01-01

    Full Text Available An experimental apparatus with a horizontal capillary tube for measurement of the surface tension of supercooled liquids, i.e. liquids in a metastable state below the equilibrium freezing point, was designed and tested in the previous study [V. Vinš et al., EPJ Web Conf. 92, 02108 (2015]. In this work, recent modifications of both the experimental setup and the measurement analysis are described. The main aim is to improve the accuracy and the reproducibility of measured surface tension and to achieve higher degrees of supercooling. Temperature probes measuring the temperature of cooling medium near the horizontal capillary tube were calibrated in the relevant temperature range from – 31 °C to + 45 °C. An additional pressure transducer was installed in the helium distribution setup at the position close to the capillary tube. The optical setup observing the liquid meniscus at the open end of the horizontal capillary tube together with the video analysis were thoroughly revised. The red laser illuminating the liquid meniscus, used at the original apparatus, was replaced by a fiber optic light source, which significantly improved the quality of the meniscus image. The modified apparatus was used for the measurement of surface tension of supercooled water at temperatures down to – 11 °C. The new data have a lower scatter compared to the previous horizontal measurements and show a good agreement with the other data obtained with a different measurement technique based on the modified capillary rise method.

  3. Evolution of the Specific Surface Area of Snow in a High Temperature Gradient Metamorphism

    Science.gov (United States)

    Wang, X.; Baker, I.

    2014-12-01

    The structural evolution of low-density snow under a high temperature gradient over a short period usually takes place in the surface layers during diurnal recrystallization or on a clear, cold night. To relate snow microstructures with their thermal properties, we combined X-ray computed microtomography (micro-CT) observations with numerical simulations. Different types of snow were tested over a large range of TGs (100 K m-1- 500 K m-1). The Specific Surface Area (SSA) was used to characterize the temperature gradient metamorphism (TGM). The magnitude of the temperature gradient and the initial snow type both influence the evolution of SSA. The SSA evolution under TGM was dominated by grain growth and the formation of complex surfaces. Fresh snow experienced a logarithmic decrease of SSA with time, a feature been observed previously by others [Calonne et al., 2014; Schneebeli and Sokratov, 2004; Taillandier et al., 2007]. However, for initial rounded and connected snow structures, the SSA will increase during TGM. Understanding the SSA increase is important in order to predict the enhanced uptake of chemical species by snow or increase in snow albedo. Calonne, N., F. Flin, C. Geindreau, B. Lesaffre, and S. Rolland du Roscoat (2014), Study of a temperature gradient metamorphism of snow from 3-D images: time evolution of microstructures, physical properties and their associated anisotropy, The Cryosphere Discussions, 8, 1407-1451, doi:10.5194/tcd-8-1407-2014. Schneebeli, M., and S. A. Sokratov (2004), Tomography of temperature gradient metamorphism of snow and associated changes in heat conductivity, Hydrological Processes, 18(18), 3655-3665, doi:10.1002/hyp.5800. Taillandier, A. S., F. Domine, W. R. Simpson, M. Sturm, and T. A. Douglas (2007), Rate of decrease of the specific surface area of dry snow: Isothermal and temperature gradient conditions, Journal of Geophysical Research: Earth Surface (2003-2012), 112(F3), doi: 10.1029/2006JF000514.

  4. Comparison of rheological, mechanical, electrical properties of HDPE filled with BaTiO3 with different polar surface tension

    Science.gov (United States)

    Su, Jun; Zhang, Jun

    2016-12-01

    In this work, three types of coupling agents: isopropyl trioleic titanate (NDZ105), vinyltriethoxysilane (SG-Si151), 3-aminopropyltriethoxysilane (KH550) were applied to modify the surface tension of Barium titanate (BaTiO3) particles. The Fourier transform infrared (FT-IR) spectra confirm the chemical adherence of coupling agents to the particle surface. The long hydrocarbon chains in NDZ105 can cover the particle surface and reduce the polar surface tension of BaTiO3 from 37.53 mJ/m2 to 7.51 mJ/m2, turning it from hydrophilic to oleophilic properties. The short and non-polar vinyl groups in SG-Si151 does not influence the surface tension of BaTiO3, but make BaTiO3 have both hydrophilic and oleophilic properties. The polar amino in KH550 can keep BaTiO3 still with hydrophilic properties. It is found that SG-Si151 modified BaTiO3 has the lowest interaction with HDPE matrix, lowering the storage modulus of HDPE composites to the greatest extent. As for mechanical properties, the polar amino groups in KH550 on BaTiO3 surface can improve the adhesion of BaTiO3 with HDPE matrix, which increases the elongation at break of HDPE composites to the greatest extent. In terms of electrical properties, the polar amino groups on surface of BaTiO3 can boost the dielectric properties of HDPE/BaTiO3 composites and decrease the volume resistivity of HDPE/BaTiO3 composites. The aim of this study is to investigate how functional groups affect the rheological, mechanical and electrical properties of HDPE composites and to select a coupling agent to produce HDPE/BaTiO3 composites with low dielectric loss, high dielectric constant and elongation at break.

  5. Flat meridional temperature gradient in the early Eocene in the subsurface rather than surface ocean

    Science.gov (United States)

    Ho, Sze Ling; Laepple, Thomas

    2016-08-01

    The early Eocene (49-55 million years ago) is a time interval characterized by elevated surface temperatures and atmospheric CO2 (refs ,), and a flatter-than-present latitudinal surface temperature gradient. The multi-proxy-derived flat temperature gradient has been a challenge to reproduce in model simulations, especially the subtropical warmth at the high-latitude surface oceans, inferred from the archaeal lipid-based palaeothermometry, . Here we revisit the interpretation by analysing a global collection of multi-proxy temperature estimates from sediment cores spanning millennia to millions of years. Comparing the variability between proxy types, we demonstrate that the present interpretation overestimates the magnitude of past climate changes on all timescales. We attribute this to an inappropriate calibration, which reflects subsurface ocean but is calibrated to the sea surface, where the latitudinal temperature gradient is steeper. Recalibrating the proxy to the temperatures of subsurface ocean, where the signal is probably formed, yields colder -temperatures and latitudinal gradient consistent with standard climate model simulations of the Eocene climate, invalidating the apparent, extremely warm polar sea surface temperatures. We conclude that there is a need to reinterpret -inferred marine temperature records in the literature, especially for reconstructions of past warm climates that rely heavily on this proxy as reflecting subsurface ocean.

  6. Phase transitions in thin films with competing surface fields and gradients.

    Science.gov (United States)

    Pang, Lijun; Landau, D P; Binder, K

    2011-10-01

    As a generic model for phase equilibria under confinement in a thin-film geometry in the presence of a gradient in the field conjugate to the order parameter, an Ising-lattice gas system is studied by both Monte Carlo simulations and a phenomenological theory. Choosing an L×L×D geometry with L≫D and periodic boundary conditions in the x,y directions, we place competing surface fields on the two L×L surfaces. In addition, a field gradient g is present in the z direction across the film, in competition with the surface fields. At temperatures T exceeding the critical temperature of the interface localization-delocalization transition, one finds a phase coexistence between oppositely oriented domains, aligned parallel to the surface fields and separated by an interface in the center of the film, for small enough g. For a weak gradient, a second-order transition to a monodomain state occurs, but it becomes first order if g exceeds a tricritical threshold. For sufficiently large gradients, another domain state becomes stabilized with domains oriented antiparallel to the surface fields.

  7. Cellular Behavior of Human Adipose-Derived Stem Cells on Wettable Gradient Polyethylene Surfaces

    Directory of Open Access Journals (Sweden)

    Hyun Hee Ahn

    2014-01-01

    Full Text Available Appropriate surface wettability and roughness of biomaterials is an important factor in cell attachment and proliferation. In this study, we investigated the correlation between surface wettability and roughness, and biological response in human adipose-derived stem cells (hADSCs. We prepared wettable and rough gradient polyethylene (PE surfaces by increasing the power of a radio frequency corona discharge apparatus with knife-type electrodes over a moving sample bed. The PE changed gradually from hydrophobic and smooth surfaces to hydrophilic (water contact angle, 90° to ~50° and rough (80 to ~120 nm surfaces as the power increased. We found that hADSCs adhered better to highly hydrophilic and rough surfaces and showed broadly stretched morphology compared with that on hydrophobic and smooth surfaces. The proliferation of hADSCs on hydrophilic and rough surfaces was also higher than that on hydrophobic and smooth surfaces. Furthermore, integrin beta 1 gene expression, an indicator of attachment, and heat shock protein 70 gene expression were high on hydrophobic and smooth surfaces. These results indicate that the cellular behavior of hADSCs on gradient surface depends on surface properties, wettability and roughness.

  8. The Mechanical of the Small Axisymmetric Oscillations of the Liquid with the Surface Tension Forces in Elastic Tank

    Directory of Open Access Journals (Sweden)

    D. A. Goncharov

    2015-01-01

    Full Text Available In this paper we investigate small axisymmetric oscillations of a liquid in an elastic tank. We also take into account the influence of surface tension forces. For this, we turn to the mechanical analogue of the considered mechanical system. To realize the transition to mechanical analogue we use the energy method: postulating the equality of kinetic and potential energy for the investigated mechanical system and the mechanical system analog. Due to this transition we can further investigate the oscillations of a mechanical analogue. As a mechanical analogue, we consider the oscillator in the spring. The mass of the oscillator is calculated as the weight of the fluid to make oscillations. The oscillator spring constant is calculated using the identity of equations, namely, equation of free small oscillations of the oscillator and equation of free small oscillations of the system under investigation: the fluid in the elastic tank. The identity of equations allows us to draw conclusion about the identity of the natural frequencies for the source mechanical system and the system of a mechanical analogue. Next, we take into consideration the action of the surface tension. We record the Laplace condition for excess pressure because of the forces of surface tension. Then we compile the expression for the generalized force, taking into account the phenomenon of the surface tension. Next, we write the equation of oscillations of a mechanical analogue. The surface tension, due to the introduction of the generalized force in the equation for small oscillations of the mechanical analogue will change the natural frequency of the mechanical analogue. The paper presents the appropriate dependencies. The abovementioned allows us to investigate the stability of small motions of fluid in microgravity or low gravity by studying the stability of small motions of mechanical analogue. The latter is especially important due to the design and development of advanced

  9. Hydraulic Performance Modifications of a Zeolite Membrane after an Alkaline Treatment: Contribution of Polar and Apolar Surface Tension Components

    Directory of Open Access Journals (Sweden)

    Patrick Dutournié

    2015-01-01

    Full Text Available Hydraulic permeability measurements are performed on low cut-off Na-mordenite (MOR-type zeolites membranes after a mild alkaline treatment. A decrease of the hydraulic permeability is systematically observed. Contact angle measurements are carried out (with three polar liquids on Na-mordenite films seeded onto alumina plates (flat membranes. A decrease of the contact angles is observed after the alkaline treatment for the three liquids. According to the theory of Lifshitz-van der Waals interactions in condensated state, surface modifications are investigated and a variation of the polar component of the material surface tension is observed. After the alkaline treatment, the electron-donor contribution (mainly due to the two remaining lone electron pairs of the oxygen atoms present in the zeolite extra frameworks decreases and an increase of the electron-receptor contribution is observed and quantified. The contribution of the polar component to the surface tension is attributed to the presence of surface defaults, which increase the surface hydrophilicity. The estimated modifications of the surface interaction energy between the solvent (water and the Na-mordenite active layer are in good agreement with the decrease of the hydraulic permeability observed after a mild alkaline treatment.

  10. A multiphase three-dimensional multi-relaxation time (MRT) lattice Boltzmann model with surface tension adjustment

    Science.gov (United States)

    Ammar, Sami; Pernaudat, Guillaume; Trépanier, Jean-Yves

    2017-08-01

    The interdependence of surface tension and density ratio is a weakness of pseudo-potential based lattice Boltzmann models (LB). In this paper, we propose a 3D multi-relaxation time (MRT) model for multiphase flows at large density ratios. The proposed model is capable of adjusting the surface tension independently of the density ratio. We also present the 3D macroscopic equations recovered by the proposed forcing scheme. A high order of isotropy for the interaction force is used to reduce the amplitude of spurious currents. The proposed 3D-MRT model is validated by verifying Laplace's law and by analyzing its thermodynamic consistency and the oscillation period of a deformed droplet. The model is then applied to the simulation of the impact of a droplet on a dry surface. Impact dynamics are determined and the maximum spread factor calculated for different Reynolds and Weber numbers. The numerical results are in agreement with data published in the literature. The influence of surface wettability on the spread factor is also investigated. Finally, our 3D-MRT model is applied to the simulation of the impact of a droplet on a wet surface. The propagation of transverse waves is observed on the liquid surface.

  11. Fabrication of durable super-repellent surfaces on cotton fabric with liquids of varying surface tension: Low surface energy and high roughness

    Science.gov (United States)

    Singh, Arun K.; Singh, Jayant K.

    2017-09-01

    In this study, we have developed super-repellent surface on cotton fabric via a facile and eco-friendly strategy using zirconia particles with water-soluble siloxane emulsion. The coated fabric using zirconia-siloxane (ZS) coating showed super-repellency of liquids with surface tension >47.7 mN/m, like water, mixtures of isopropyl alcohol with deionized water (2% and 5%, v/v), and ethylene glycol with contact angle of 158°, 155°, 153° and 152°, respectively. Furthermore, the coated fabric displays low sliding angle, materials with ability to repel water in the presence of oily pollutants are very useful in application related to sea water. Thus as-prepared coated fabric, with dual functionality, is a promising material for many applications including anti-wetting, self-cleaning, support for aquatic floating devices and as a filtration material for rapid and continuous oil-water separation.

  12. Effect of surface tension on self-termination in Au tip fabrication for tip-enhanced Raman spectroscopy

    Science.gov (United States)

    Chaunchaiyakul, Songpol; Yano, Takeshi; Krukowski, Pawel; Kuwahara, Yuji

    2016-09-01

    The effect of surface tension on the fabrication of Au tips was investigated. When using a 12 M HCl aqueous solution, the etching process did not consistently self-terminate after the lower part of the wire dropped, resulting in the poor reproducibility of the tip sharpness. However, using an ethanolic solution of 12 mol/l HCl, a self-terminating etching process was always observed, resulting in the improved reproducibility of sharp tips. We attribute this to the reduced surface compared to that of aqueous HCl. The obtained tips were used in tip-enhanced Raman spectroscopy experiments, in which significant signal enhancement was observed.

  13. Solid/liquid interfacial tension as a tool to study stability of lysozyme on adsorption to solid surfaces

    Science.gov (United States)

    Krishnan, C. A.; Maheshwari, R.; Dhathathreyan, A.

    2006-01-01

    This work proposes the use of solid/liquid interfacial tension to study the stability of adsorbed lysozyme films on a solid surface using the contact angle of a liquid at the three phase contact line, in the presence of a denaturant, urea. Results suggest a direct correlation between this method with a standard technique like the fluorescence emission spectra and is measured with the same observable error as in the spectral methods. Further the technique provides a simple and direct handle to evaluate the homogeneity and degree of polarity of protein films on solid surfaces.

  14. Chemical imaging of protein adsorption and crystallization on a wettability gradient surface.

    Science.gov (United States)

    Glassford, Stefanie; Chan, K L Andrew; Byrne, Bernadette; Kazarian, Sergei G

    2012-02-14

    The use of self-assembled monolayers is an established method to study the effect of surface properties on proteins and other biological materials. The generation of a monolayer with a gradient of chemical properties allows for the study of multiple surface properties simultaneously in a high throughput manner. Typically, in order to detect the presence of proteins or biological material on a surface, the use of additional dyes or tags is required. Here we present a novel method of studying the effect of gradient surface properties on protein adsorption and crystallization in situ through the use of ATR-FTIR spectroscopic imaging, which removes the need for additional labeling. We describe the successful application of this technique to the measurement of the growth of a gradient monolayer of octyltrichlorosilane across the surface of a silicon ATR element. ATR-FTIR imaging was also used to study the adsorption of lysozyme, as a model protein, onto the modified surface. The sensitivity of measurements obtained with a focal plane array (FPA) detector were improved though the use of pixel averaging which allowed small absorption bands to be detected with minimal effect on the spatial resolution along the gradient. Study of the effect of surface hydrophobicity on both adsorption of lysozyme to the element and lysozyme crystallization revealed that more lysozyme adsorbed to the hydrophobic side of the ATR element and more lysozyme crystals formed in the same region. These findings strongly suggest a correlation exists between surface protein adsorption and protein crystallization. This method could be applied to the study of other proteins and whole cells.

  15. Mean sea surface and geoid gradient comparisons with TOPEX altimeter data

    Science.gov (United States)

    Rapp, Richard H.; Yi, Yuchan; Wang, Yan Ming

    1994-01-01

    of the large differences occur in regions lacking altimeter data prior to the TOPEX/POSEIDON mission and/or areas of significant bathymetric signature. Geoid gradients are needed for the reduction of individual track data to a reference track. The accuracy of the determination of such gradients was determined through the comparison of predicted along-track gradients to the observed gradients. Among four mean sea surfaces tested the best agreement was found with the OSU mean sea surface placed on the TOPEX geophysical data record.

  16. Morphology observation for surface orange peel and fracture in tension sample of aluminum-alloy sheet and characterization of nano hardness

    Institute of Scientific and Technical Information of China (English)

    Ma Mingtu; Mei Huashen; Lu Hongzhou; Yang Hongya; Wu Emei; Zhou Mingbo

    2012-01-01

    The tension property of aluminum-alloy sheet with different microstructures is measured, and the surface and tension fracture morphology of tension sample with and without orange peel are observed by using scanning electron microscope (SEM). Surface roughness and nano hardness of tension sample are measured. The results show that the average elongation of the samples with orange peel is lower than that without orange peel ; especially the r value of per- pendicular to the rolling direction is much lower than that without orange peel. The tension surface of the orange peel samples is very rough; various parameters of surface roughness are higher. Under the observation of SEM, a wider slid- ing band with a micro crack on the surface of orange peel sample can be found. The various parameters of surface rough- ness without orange peel sample are near to zero, the sliding band is narrow and without micro cracks. The dimple width in tensile fracture of orange peel sample is larger than that without orange peel sample, but shear lip is narrower. The nano hardness testing results show that samples with orange peel behave high elastic modulus, high hardness, and high maximum load, but low plastic deformation depth. These mentioned features can completely describe surface and frac- ture morphology of tension samt31es with oranze peel.

  17. Chemically active colloids near osmotic-responsive walls with surface-chemistry gradients

    Science.gov (United States)

    Popescu, M. N.; Uspal, W. E.; Dietrich, S.

    2017-04-01

    Chemically active colloids move by creating gradients in the composition of the surrounding solution and by exploiting the differences in their interactions with the various molecular species in solution. If such particles move near boundaries, e.g. the walls of the container confining the suspension, gradients in the composition of the solution are also created along the wall. This give rise to chemi-osmosis (via the interactions of the wall with the molecular species forming the solution), which drives flows coupling back to the colloid and thus influences its motility. Employing an approximate ‘point-particle’ analysis, we show analytically that—owing to this kind of induced active response (chemi-osmosis) of the wall—such chemically active colloids can align with, and follow, gradients in the surface chemistry of the wall. In this sense, these artificial ‘swimmers’ exhibit a primitive form of thigmotaxis with the meaning of sensing the proximity of a (not necessarily discontinuous) physical change in the environment. We show that the alignment with the surface-chemistry gradient is generic for chemically active colloids as long as they exhibit motility in an unbounded fluid, i.e. this phenomenon does not depend on the exact details of the propulsion mechanism. The results are discussed in the context of simple models of chemical activity, corresponding to Janus particles with ‘source’ chemical reactions on one half of the surface and either ‘inert’ or ‘sink’ reactions over the other half.

  18. Chemically active colloids near osmotic-responsive walls with surface-chemistry gradients.

    Science.gov (United States)

    Popescu, M N; Uspal, W E; Dietrich, S

    2017-04-05

    Chemically active colloids move by creating gradients in the composition of the surrounding solution and by exploiting the differences in their interactions with the various molecular species in solution. If such particles move near boundaries, e.g. the walls of the container confining the suspension, gradients in the composition of the solution are also created along the wall. This give rise to chemi-osmosis (via the interactions of the wall with the molecular species forming the solution), which drives flows coupling back to the colloid and thus influences its motility. Employing an approximate 'point-particle' analysis, we show analytically that-owing to this kind of induced active response (chemi-osmosis) of the wall-such chemically active colloids can align with, and follow, gradients in the surface chemistry of the wall. In this sense, these artificial 'swimmers' exhibit a primitive form of thigmotaxis with the meaning of sensing the proximity of a (not necessarily discontinuous) physical change in the environment. We show that the alignment with the surface-chemistry gradient is generic for chemically active colloids as long as they exhibit motility in an unbounded fluid, i.e. this phenomenon does not depend on the exact details of the propulsion mechanism. The results are discussed in the context of simple models of chemical activity, corresponding to Janus particles with 'source' chemical reactions on one half of the surface and either 'inert' or 'sink' reactions over the other half.

  19. Surface tension of decane binary and ternary mixtures with eicosane, docosane, and tetracosane

    DEFF Research Database (Denmark)

    Queimada, Antonio; Cao, A.I.; Marrucho, I.M.

    2005-01-01

    -C24H50 and the ternary n-C10H22 + n-C20H42 + n-C24H50 were measured from 293.15 K (or above the solution melting temperature) up to 343.15 K. An average absolute deviation of 1.3% was obtained in comparison with pure component literature data. No mixture information for the reported systems was found......A tensiometer operating on the Wilhelmy plate method was employed to measure liquid-vapor interfacial tensions of three binary mixtures and one ternary mixture of decane with eicosane, docosane, and tetracosane. Tensions of binary mixtures n-C10H22 + n-C20H42, n-C10H22 + n-C22H46, and n-C10H22 + n...

  20. Direct Monte Carlo Measurement of the Surface Tension in Ising Models

    CERN Document Server

    Hasenbusch, M

    1992-01-01

    I present a cluster Monte Carlo algorithm that gives direct access to the interface free energy of Ising models. The basic idea is to simulate an ensemble that consists of both configurations with periodic and with antiperiodic boundary conditions. A cluster algorithm is provided that efficently updates this joint ensemble. The interface tension is obtained from the ratio of configurations with periodic and antiperiodic boundary conditions, respectively. The method is tested for the 3-dimensional Ising model.

  1. Motion of a drop on a horizontal solid surface with a wettability gradient

    Science.gov (United States)

    Moumen, Nadjoua

    The motion of drops of tetraethylene glycol in a wettability gradient present on a silicon surface is investigated experimentally and theoretically. The gradient was formed by exposing clean silicon surfaces to a source of dodecyltrichlorosilane vapor. The static contact angles were measured as a function of position and used to characterize the local wettability gradient. The Reynolds, capillary, and Bond numbers in the experiments were relatively small. The measured migration velocities of drops over a range of sizes demonstrated the complex nature of the variation of the velocity with position on the gradient surface in response to the changes in the driving force and the resistance to the motion. The results are organized and interpreted using a simple quasi-steady hydrodynamic model in which inertial effects and deformation due to gravity as well as motion are neglected so that the shape is approximated by a spherical cap. Two approaches are used to estimate the hydrodynamic resistance experienced by the drop. In the "wedge approximation" the drop is modeled as a collection of wedges; the drag on each wedge is calculated from a solution for Stokes flow. In the second approach, lubrication theory is employed while retaining the exact shape of the drop. A slip boundary condition is used in a region close to the contact line to relax the usual stress singularity. The results from the wedge approximation and lubrication theory are indistinguishable at contact angles ≤ 30°. The theoretical model based on the wedge approximation describes the qualitative features of the shape of the curve of velocity versus position along the gradient surface. A detailed investigation of the remaining discrepancy does not support the hypothesis of a missing resistance due to either contact line dissipation or an underestimation of the hydrodynamic drag. Instead, it is concluded that a reduction in the driving force due to contact angle hysteresis is the most likely reason. The

  2. Effect of surface tension, viscosity, and process conditions on polymer morphology deposited at the liquid-vapor interface.

    Science.gov (United States)

    Haller, Patrick D; Bradley, Laura C; Gupta, Malancha

    2013-09-17

    We have observed that the vapor-phase deposition of polymers onto liquid substrates can result in the formation of polymer films or particles at the liquid-vapor interface. In this study, we demonstrate the relationship between the polymer morphology at the liquid-vapor interface and the surface tension interaction between the liquid and polymer, the liquid viscosity, the deposition rate, and the deposition time. We show that the thermodynamically stable morphology is determined by the surface tension interaction between the liquid and the polymer. Stable polymer films form when it is energetically favorable for the polymer to spread over the surface of the liquid, whereas polymer particles form when it is energetically favorable for the polymer to aggregate. For systems that do not strongly favor spreading or aggregation, we observe that the initial morphology depends on the deposition rate. Particles form at low deposition rates, whereas unstable films form at high deposition rates. We also observe a transition from particle formation to unstable film formation when we increase the viscosity of the liquid or increase the deposition time. Our results provide a fundamental understanding about polymer growth at the liquid-vapor interface and can offer insight into the growth of other materials on liquid surfaces. The ability to systematically tune morphology can enable the production of particles for applications in photonics, electronics, and drug delivery and films for applications in sensing and separations.

  3. Estimation of measurement uncertainty caused by surface gradient for a white light interferometer.

    Science.gov (United States)

    Liu, Mingyu; Cheung, Chi Fai; Ren, Mingjun; Cheng, Ching-Hsiang

    2015-10-10

    Although the scanning white light interferometer can provide measurement results with subnanometer resolution, the measurement accuracy is far from perfect. The surface roughness and surface gradient have significant influence on the measurement uncertainty since the corresponding height differences within a single CCD pixel cannot be resolved. This paper presents an uncertainty estimation method for estimating the measurement uncertainty due to the surface gradient of the workpiece. The method is developed based on the mathematical expression of an uncertainty estimation model which is derived and verified through a series of experiments. The results show that there is a notable similarity between the predicted uncertainty from the uncertainty estimation model and the experimental measurement uncertainty, which demonstrates the effectiveness of the method. With the establishment of the proposed uncertainty estimation method, the uncertainty associated with the measurement result can be determined conveniently.

  4. Chemically active colloids near osmotic-responsive walls with surface-chemistry gradients

    CERN Document Server

    Popescu, M N; Dietrich, S

    2016-01-01

    Chemically active colloids move by creating gradients in the composition of the surrounding solution and by exploiting the differences in their interactions with the various molecular species in solution. If such particles move near boundaries, e.g., the walls of the container confining the suspension, gradients in the composition of the solution are also created along the wall. This give rise to chemi-osmosis (via the interactions of the wall with the molecular species forming the solution), which drives flows coupling back to the colloid and thus influences its motility. Employing an approximate "point-particle" analysis, we show analytically that -- owing to this kind of induced active response (chemi-osmosis) of the wall -- such chemically active colloids can align with, and follow, gradients in the surface chemistry of the wall. In this sense, these artificial "swimmers" exhibit a primitive form of thigmotaxis with the meaning of sensing the proximity of a (not necessarily discontinuous) physical change ...

  5. Butler-Sugimoto monomolecular bilayer interface model: the effect of oxygen on the surface tension of a liquid metal and its wetting of a ceramic.

    Science.gov (United States)

    Yen, Pei-Shan; Datta, Ravindra

    2014-07-15

    The influence of oxygen on liquid-gas surface tension of molten metals has been well-investigated experimentally and modeled theoretically via the Szyszkowski equation, derivable from the Butler molecular monolayer interface model. However, there is no corresponding model describing the experimentally observed profound effect of oxygen partial pressure on solid-liquid surface tension as well as on contact angle of molten metals on ceramic substrates. Here, we utilize the Butler-Sugimoto thermodynamic approach based on a monomolecular bilayer interface model to investigate the effect of oxygen partial pressure on liquid-gas as well as solid-liquid surface tension of molten Cu/Al2O3 and molten Ag/Al2O3 systems. It is shown that both liquid-gas and solid-liquid surface tension are a strong function of oxygen activity in the melt, which, in turn, depends on gas-phase oxygen partial pressure, in conformity with experiments. The change in solid-liquid surface tension and wetting is also greatly affected by the change in liquid-gas surface tension. This improved understanding is of practical significance in many applications.

  6. Preparation and characterization of chemical gradient surfaces and their application for the study of cellular interaction phenomena

    NARCIS (Netherlands)

    Ruardy, TG; Schakenraad, JM; vanderMei, HC; Busscher, HJ

    1997-01-01

    Chemical gradient surfaces are surfaces with a gradually changing chemistry along their length which is responsible for a position bound variation in physical properties, most notably, the wettability. In this review, methods to prepare (palladium deposition, diffusion technique, density gradient me

  7. Preparation and characterization of chemical gradient surfaces and their application for the study of cellular interaction phenomena

    NARCIS (Netherlands)

    Ruardy, TG; Schakenraad, JM; vanderMei, HC; Busscher, HJ

    1997-01-01

    Chemical gradient surfaces are surfaces with a gradually changing chemistry along their length which is responsible for a position bound variation in physical properties, most notably, the wettability. In this review, methods to prepare (palladium deposition, diffusion technique, density gradient me

  8. [Study of the surface tear tension and evaluation of its importance for the retinal physiology and pathology in contact correction and in adaptation to soft contact lenses].

    Science.gov (United States)

    Cherepnin, A I; Smoliakova, G P; Sorokin, E L

    2003-01-01

    The surface lachrymal-fluid (LF) tension was investigated by teardrop dissection in 115 patients with myopia before they were prescribed soft contact lenses (SCL). Such tension was found to be of clinical importance for the development of SCL adaptation disorders. A longer adaptation period in patients with myopia was associated with a low surface LF tension. A high surface LF tension concurrent with the teardrop dissection mode of the destruction type was typical of the pathological nature of SCL adaptation (12.1% of patients). The obtained data are needed to detect timely the risk of dysadaptation disorders and corneal complications before SCL prescription for the purpose of undertaking the pathogenetically substantiated medication to prevent such complications.

  9. Numerical Study of Drop Motion on a Surface with Wettability Gradient and Contact Angle Hysteresis

    CERN Document Server

    Huang, Jun-Jie; Wang, Xinzhu

    2013-01-01

    In this work, the motion of a 2-D drop on a surface with given wettability gradient is studied numerically by a hybrid lattice-Boltzmann finite-difference method using the multiple-relaxation-time collision model. We incorporate the geometric wetting boundary condition that allows accurate implementation of a contact angle hysteresis model. The method is first validated through three benchmark tests, including the layered Poiseuille flow with a viscosity contrast, the motion of a liquid column in a channel with specified wettability gradient and the force balance for a static drop attached to a surface with hysteresis subject to a body force. Then, simulations of a drop on a wall with given wettability gradient are performed under different conditions. The effects of the Reynolds number, the viscosity ratio, the wettability gradient, as well as the contact angle hysteresis on the drop motion are investigated in detail. It is found that the capillary number of the drop in steady state is significantly affected...

  10. Model HULIS compounds in nanoaerosol clusters – investigations of surface tension and aggregate formation using molecular dynamics simulations

    Directory of Open Access Journals (Sweden)

    T. Hede

    2011-07-01

    Full Text Available Cloud condensation nuclei act as cores for water vapour condensation, and their composition and chemical properties may enhance or depress the ability for droplet growth. In this study we use molecular dynamics simulations to show that model humic-like substances (HULIS in systems containing 10 000 water molecules mimic experimental data well referring to reduction of surface tension. The model HULIS compounds investigated in this study are cis-pinonic acid (CPA, pinic acid (PAD and pinonaldehyde (PAL. The structural properties examined show the ability for the model HULIS compounds to aggregate inside the nanoaerosol clusters.

  11. Unidirectional motion of a water nanodroplet subjected to a surface energy gradient.

    Science.gov (United States)

    Kou, Jianlong; Mei, Maofei; Lu, Hangjun; Wu, Fengmin; Fan, Jintu

    2012-05-01

    We perform molecular dynamics simulations to demonstrate that when a nanodroplet is confined inside a carbon nanotube (CNT), unidirectional motion can be created by a nonzero surface energy gradient. It is found that the water nanodroplet moves along the direction of increasing surface energy. The transportation efficiency of the water nanodroplet is found to be dependent on the surface energy gradient; environmental temperature; and the flexibility, diameter, and defectiveness of the CNT. It is shown that higher surface energy gradient, the smaller diameter of the CNT, and fewer defects promote higher transportation efficiency. However, when the temperature is too high or too low, the water transport across the CNT is impeded. Except for the initial stage at the relatively low environmental temperature, higher flexibility of the CNT wall reduces the transportation efficiency. It is also found that the hydrogen bonds of water molecules play a role in the dynamic acceleration process with a wavelike feature. The present work provides insight for the development of CNT devices for applications such as drug delivery, nanopumps, chemical process control, and molecular medicine.

  12. Surface gradient integrated profiler for X-ray and EUV optics

    Directory of Open Access Journals (Sweden)

    Yasuo Higashi et al

    2007-01-01

    Full Text Available A new ultraprecise profiler has been developed to measure, for example, asymmetric and aspheric profiles. The principle of our measuring method is that the normal vector at each point on the surface is determined by making the incident light beam on the mirror surface and the reflected beam at that point of coincident. The gradient at each point is calculated from the normal vector, and the surface profile is then obtained by integrating the gradients. The measuring instrument was designed in accordance with the above principle. In the design, four ultraprecise goniometers were applied to adjust the light axis for normal vector measurement. The angle-positioning resolution and accuracy of each goniometer are, respectively, 0.018 and 0.2 μrad. Thus, in the measuring instrument, the most important factor is the accuracy of the normal vectors measured by the goniometers. Therefore, the rotating angle-positioning errors were measured and calibrated. An elliptical profile mirror for nanometer hard-X-ray focusing was measured, and compared with the measured profile using a stitching interferometer. The absolute measurement accuracy of approximately 5 nm (peak-to-valley was achieved. Then the measurements of 1000-mm-long flat, spherical and parabolic mirrors were demonstrated. The surface profiles of the mirrors were obtained by integrating the interpolated gradient.

  13. An apparatus with a horizontal capillary tube intended for measurement of the surface tension of supercooled liquids

    Directory of Open Access Journals (Sweden)

    Vinš Václav

    2015-01-01

    Full Text Available New experimental apparatus for measurement of the surface tension of liquids under the metastable supercooled state has been designed and assembled in the study. The measuring technique is similar to the method employed by P.T. Hacker [NACA TN 2510] in 1951. A short liquid thread of the liquid sample was sucked inside a horizontal capillary tube partly placed in a temperature-controlled glass chamber. One end of the capillary tube was connected to a setup with inert gas which allowed for precise tuning of the gas overpressure in order of hundreds of Pa. The open end of the capillary tube was precisely grinded and polished before the measurement in order to assure planarity and perpendicularity of the outer surface. The liquid meniscus at the open end was illuminated by a laser beam and observed by a digital camera. Application of an increasing overpressure of the inert gas at the inner meniscus of the liquid thread caused variation of the outer meniscus such that it gradually changed from concave to flat and subsequently convex shape. The surface tension at the temperature of the inner meniscus could be evaluated from the overpressure corresponding to exactly planar outer meniscus. Detailed description of the new setup together with results of the preliminary tests is provided in the study.

  14. The elimination of water-borne contaminants by a surface-tension based absorption system; Elimination de contaminants dans l`eau a l`aide d`un systeme d`absorption agissant sur la tension de surface

    Energy Technology Data Exchange (ETDEWEB)

    Paquin, J.; Panasuk, S.; Cote, B. [Sanexen Services Environnementaux inc., Longueuil, PQ (Canada)

    1997-12-31

    A new filtration method designed to remove colloidal or emulsified contaminants in water was described. The method, called Ultrasorption{sup T}M, employs an absorption technique by which the surface tension of water is increased. The method can successfully treat millions of litres of contaminated water in situations that would be problematic with conventional methods. Many water-borne contaminants such as polychlorinated biphenyls (PCBs), chlorophenols and low-polarity hydrocarbons such as polycyclic aromatic hydrocarbons (PAHs) are hydrophobic. The Ultrasorption method is based on the hydrophobic nature of these contaminants. It employs a special solvation agent that is integrated into the filtration matrix and is designed to capture the hydrophobic contaminants in the water. The solvation agent acts as both a demulsifier by increasing the surface tension of the water and as a fluid to allow the dissolution and retention of the contaminants. Results of trials at several sites in Quebec including Saint-Basile-le-Grand, Manic II, Saint-Amable and Smithville were presented. 5 refs., 3 tabs.

  15. Stabilizing effect of ion pressure gradient on magnetic curvature-driven drift modes located at rational surface of tokamak plasma

    Institute of Scientific and Technical Information of China (English)

    Wang Ai-Ke

    2005-01-01

    In the fluid model, we derive a dispersion relation for the toroidal drift modes of tokamak plasmas, including the ion pressure gradient and the magnetic field gradient and curvature. It is shown that the magnetic field gradient and curvature (MFGC) can cause instabilities at the rational surface, which are of toroidicity-induced (TI) modes. On the other hand, it is discovered that the ion pressure gradient can stabilize the present MFGC instabilities. The critical threshold of ion pressure gradient, which makes the growth rate reduced to zero, is obtained both analytically and numerically.

  16. Modified coherent gradient sensing method for slope measurement of reflective surfaces

    Science.gov (United States)

    Ma, Kang; Xie, Huimin

    2015-05-01

    A phase shifting method was developed for Coherent Gradient Sensing (CGS) using a three-step phase shifting method. Three different inteferograms were obtained by changing the distance between two gratings. The phase filed can be calculated accurately from the three inteferograms. The interference fringes (phase field) in reflection mode represent the gradient contours of the out-of-plane displacement of a surface. The curvatures and shape of the surface both can be calculated by numerical methods using the fringe patterns. The measurement principle and experimental setup were introduced in detail. As an application, a standard specimen with a curvature radius of 5 m was measured. From the analysis of the experimental results, we find that the relative error of the curvature using this method was about 0.78%. The method has good potentials for measuring the slopes, curvatures and shapes of thin film/substrate systems.

  17. Surface tensions of multi-component mixed inorganic/organic aqueous systems of atmospheric significance: measurements, model predictions and importance for cloud activation predictions

    Directory of Open Access Journals (Sweden)

    D. O. Topping

    2006-11-01

    Full Text Available In order to predict the physical properties of aerosol particles, it is necessary to adequately capture the behaviour of the ubiquitous complex organic components. One of the key properties which may affect this behaviour is the contribution of the organic components to the surface tension of aqueous particles in the moist atmosphere. Whilst the qualitative effect of organic compounds on solution surface tensions has been widely reported, our quantitative understanding on mixed organic and mixed inorganic/organic systems is limited.  Furthermore, it is unclear whether models that exist in the literature can reproduce the surface tension variability for binary and higher order multi-component organic and mixed inorganic/organic systems of atmospheric significance. The current study aims to resolve both issues to some extent. Surface tensions of single and multiple solute aqueous solutions were measured and compared with predictions from a number of model treatments. On comparison with binary organic systems, two predictive models found in the literature provided a range of values resulting from sensitivity to calculations of pure component surface tensions.  Results indicate that a fitted model can capture the variability of the measured data very well, producing the lowest average percentage deviation for all compounds studied.  The performance of the other models varies with compound and choice of model parameters. The behaviour of ternary mixed inorganic/organic systems was unreliably captured by using a predictive scheme and this was composition dependent. For more "realistic" higher order systems, entirely predictive schemes performed poorly. It was found that use of the binary data in a relatively simple mixing rule, or modification of an existing thermodynamic model with parameters derived from binary data, was able to accurately capture the surface tension variation with concentration. Thus, it would appear that in order to model

  18. A propagating ATPase gradient drives transport of surface-confined cellular cargo.

    Science.gov (United States)

    Vecchiarelli, Anthony G; Neuman, Keir C; Mizuuchi, Kiyoshi

    2014-04-01

    The faithful segregation of duplicated genetic material into daughter cells is critical to all organisms. In many bacteria, the segregation of chromosomes involves transport of "centromere-like" loci over the main body of the chromosome, the nucleoid, mediated by a two-protein partition system: a nonspecific DNA-binding ATPase, ParA, and an ATPase stimulator, ParB, which binds to the centromere-like loci. These systems have previously been proposed to function through a filament-based mechanism, analogous to actin- or microtubule-based movement. Here, we reconstituted the F-plasmid partition system using a DNA-carpeted flow cell as an artificial nucleoid surface and magnetic beads coated with plasmid partition complexes as surface-confined cargo. This minimal system recapitulated directed cargo motion driven by a surface ATPase gradient that propagated with the cargo. The dynamics are consistent with a diffusion-ratchet model, whereby the cargo dynamically establishes, and interacts with, a concentration gradient of the ATPase. A chemophoresis force ensues as the cargo perpetually chases the ATPase gradient, allowing the cargo to essentially "surf" the nucleoid on a continuously traveling wave of the ATPase. Demonstration of this non-filament-based motility mechanism in a biological context establishes a distinct class of motor system used for the transport and positioning of large cellular cargo.

  19. Surface tension of dilute alcohol-aqueous binary fluids: n-Butanol/water, n-Pentanol/water, and n-Hexanol/water solutions

    Science.gov (United States)

    Cheng, Kuok Kong; Park, Chanwoo

    2017-01-01

    Surface tension of pure fluids, inherently decreasing with regard to temperature, creates a thermo-capillary-driven (Marangoni) flow moving away from a hot surface. It has been known that few high-carbon alcohol-aqueous solutions exhibit an opposite behavior of the surface tension increasing with regard to temperature, such that the Marangoni flow moves towards the hot surface (self-rewetting effect). We report the surface tensions of three dilute aqueous solutions of n-Butanol, n-Pentanol and n-Hexanol as self-rewetting fluids measured for ranges of alcohol concentration (within solubility limits) and fluid temperatures (25-85 °C). A maximum bubble pressure method using a leak-tight setup was used to measure the surface tension without evaporation losses of volatile components. It was found from this study that the aqueous solutions with higher-carbon alcohols exhibit a weak self-rewetting behavior, such that the surface tensions remain constant or slightly increases above about 60 °C. These results greatly differ from the previously reported results showing a strong self-rewetting behavior, which is attributed to the measurement errors associated with the evaporation losses of test fluids during open-system experiments.

  20. Combined Effect of Surface Tension, Gravity and van der Waals Force Induced by a Non-Contact Probe Tip on the Shape of Liquid Surface

    Institute of Scientific and Technical Information of China (English)

    LIU Nan; BAI Yi-Long; XIA Meng-Fen; KE Fu-Jiu

    2005-01-01

    @@ Aiming at understanding how a liquid film on a substrate affects the atomic force microscopic image in experiments, we present an analytical representation of the shape of liquid surface under van der Waals interaction induced by a non-contact probe tip. The analytical expression shows good consistence with the corresponding numerical results. According to the expression, we find that the vertical scale of the liquid dome is mainly gov erned by a combination of van der Waals force, surface tension and probe tip radius, and is weekly related to gravity. However, its horizontal extension is determined by the capillary length.

  1. Deleted in Malignant Brain Tumors 1 (DMBT1 is present in hyaline membranes and modulates surface tension of surfactant

    Directory of Open Access Journals (Sweden)

    Griese Matthias

    2007-10-01

    Full Text Available Abstract Background Deleted in Malignant Brain Tumors 1 (DMBT1 is a secreted scavenger receptor cysteine-rich protein that binds various bacteria and is thought to participate in innate pulmonary host defense. We hypothesized that pulmonary DMBT1 could contribute to respiratory distress syndrome in neonates by modulating surfactant function. Methods DMBT1 expression was studied by immunohistochemistry and mRNA in situ hybridization in post-mortem lungs of preterm and full-term neonates with pulmonary hyaline membranes. The effect of human recombinant DMBT1 on the function of bovine and porcine surfactant was measured by a capillary surfactometer. DMBT1-levels in tracheal aspirates of ventilated preterm and term infants were determined by ELISA. Results Pulmonary DMBT1 was localized in hyaline membranes during respiratory distress syndrome. In vitro addition of human recombinant DMBT1 to the surfactants increased surface tension in a dose-dependent manner. The DMBT1-mediated effect was reverted by the addition of calcium depending on the surfactant preparation. Conclusion Our data showed pulmonary DMBT1 expression in hyaline membranes during respiratory distress syndrome and demonstrated that DMBT1 increases lung surface tension in vitro. This raises the possibility that DMBT1 could antagonize surfactant supplementation in respiratory distress syndrome and could represent a candidate target molecule for therapeutic intervention in neonatal lung disease.

  2. Surface Tension Flows inside Surfactant-Added Poly(dimethylsiloxane Microstructures with Velocity-Dependent Contact Angles

    Directory of Open Access Journals (Sweden)

    Jyh Jian Chen

    2014-03-01

    Full Text Available Filling of liquid samples is realized in a microfluidic device with applications including analytical systems, biomedical devices, and systems for fundamental research. The filling of a disk-shaped polydimethylsiloxane (PDMS microchamber by liquid is analyzed with reference to microstructures with inlets and outlets. The microstructures are fabricated using a PDMS molding process with an SU-8 mold. During the filling, the motion of the gas-liquid interface is determined by the competition among inertia, adhesion, and surface tension. A single ramp model with velocity-dependent contact angles is implemented for the accurate calculation of surface tension forces in a three-dimensional volume-of-fluid based model. The effects of the parameters of this functional form are investigated. The influences of non-dimensional parameters, such as the Reynolds number and the Weber number, both determined by the inlet velocity, on the flow characteristics are also examined. An oxygen-plasma-treated PDMS substrate is utilized, and the microstructure is modified to be hydrophilic. Flow experiments are conducted into both hydrophilic and hydrophobic PDMS microstructures. Under a hydrophobic wall condition, numerical simulations with imposed boundary conditions of static and dynamic contact angles can successfully predict the moving of the meniscus compared with experimental measurements. However, for a hydrophilic wall, accurate agreement between numerical and experimental results is obvious as the dynamic contact angles were implemented.

  3. The surface tension of a solid at the solid-vacuum interface, an evaluation from adsorption and wall potential calculations.

    Science.gov (United States)

    Jakubov, Tim S; Mainwaring, David E

    2007-03-15

    A method for the evaluation of quantities that are experimentally inaccessible such as the surface tension at the solid-vacuum interface and the superficial tension of the fluid in contact with the solid is presented. The approach is based on consideration of an equilibrium of a fluid in solid capillary wherein a balance between surface and capillary forces has been replaced by conceptual alternative interfacial and centrifugal forces. This approach involves the simultaneous numerical solution one the special forms of the Gibbs equation for solid-fluid interface and a generalized Kelvin equation derived earlier. The latter equation takes into account interactions between the solid thick cylindrical wall and confined fluid, this body-body interaction potential has been primarily calculated using the Lennard-Jones (6-12) expression for the atom-atom pair potentials and expressed by hypergeometrical functions having good convergences. All numerical calculations shown here have been performed for the model graphite-argon system at 90 K. Finally, an analysis of the accuracy of the proposed method is considered.

  4. Buoyancy-driven detachment of a wall-bound pendant drop: Interface shape at pinchoff and nonequilibrium surface tension

    Science.gov (United States)

    Lamorgese, A.; Mauri, R.

    2015-09-01

    We present numerical results from phase-field simulations of the buoyancy-driven detachment of an isolated, wall-bound pendant emulsion droplet acted upon by surface tension and wall-normal buoyancy forces alone. Our theoretical approach follows a diffuse-interface model for partially miscible binary mixtures which has been extended to include the influence of static contact angles other than 90∘, based on a Hermite interpolation formulation of the Cahn boundary condition as first proposed by Jacqmin [J. Fluid Mech. 402, 57 (2000), 10.1017/S0022112099006874]. In a previous work, this model has been successfully employed for simulating triphase contact line problems in stable emulsions with nearly immiscible components, and, in particular, applied to the determination of critical Bond numbers for buoyancy-driven detachment as a function of static contact angle. Herein, the shapes of interfaces at pinchoff are investigated as a function of static contact angle and distance to the critical condition. Furthermore, we show numerical results on the nonequilibrium surface tension that help to explain the discrepancy between our numerically determined static contact angle dependence of the critical Bond number and its sharp-interface counterpart based on a static stability analysis of equilibrium shapes after numerical integration of the Young-Laplace equation. Finally, we show the influence of static contact angle and distance to the critical condition on the temporal evolution of the minimum neck radius in the necking regime of drop detachment.

  5. Density, viscosity, surface tension, and spectroscopic properties for binary system of 1,2-ethanediamine + diethylene glycol

    Energy Technology Data Exchange (ETDEWEB)

    Li, Lihua; Zhang, Jianbin, E-mail: tadzhang@pku.edu.cn; Li, Qiang; Guo, Bo; Zhao, Tianxiang; Sha, Feng

    2014-08-20

    Graphical abstract: Excess property of the binary system 1,2-ethanediamine (EDA) + diethylene glycol (DEG). - Highlights: • Densities and viscosities of EDA + DEG at 298.15–318.150 K were listed. • Thermodynamics data of EDA + DEG at 298.15–318.15 K were calculated. • Surface tension of EDA + DEG at 298.15 K was measured. • Intermolecular interaction of EDA with DEG was discussed. - Abstract: This paper reports density and viscosity data at T = 298.15, 303.15, 308.15, 313.15, and 318.15 K and surface tension data at 298.15 K for the binary system 1,2-ethanediamine (EDA) + diethylene glycol (DEG) as a function of composition under atmospheric pressure. From the experimental density and viscosity data, the excess molar volume and viscosity deviation were calculated, and the results were fitted to a Redlich–Kister equation to obtain the coefficients and to estimate the standard deviations between the experimental and calculated quantities. Based on the kinematic viscosity data, enthalpy of activation for viscous flow, entropy of activation for the viscous flow, and Gibbs energies of activation of viscous flow were calculated. In addition, based on Fourier transform infrared spectra, UV–vis spectra, and electrical conductivity for the system EDA + DEG with various concentrations, intermolecular interaction of EDA with DEG was discussed.

  6. Buoyancy-driven detachment of a wall-bound pendant drop: interface shape at pinchoff and nonequilibrium surface tension.

    Science.gov (United States)

    Lamorgese, A; Mauri, R

    2015-09-01

    We present numerical results from phase-field simulations of the buoyancy-driven detachment of an isolated, wall-bound pendant emulsion droplet acted upon by surface tension and wall-normal buoyancy forces alone. Our theoretical approach follows a diffuse-interface model for partially miscible binary mixtures which has been extended to include the influence of static contact angles other than 90^{∘}, based on a Hermite interpolation formulation of the Cahn boundary condition as first proposed by Jacqmin [J. Fluid Mech. 402, 57 (2000)JFLSA70022-112010.1017/S0022112099006874]. In a previous work, this model has been successfully employed for simulating triphase contact line problems in stable emulsions with nearly immiscible components, and, in particular, applied to the determination of critical Bond numbers for buoyancy-driven detachment as a function of static contact angle. Herein, the shapes of interfaces at pinchoff are investigated as a function of static contact angle and distance to the critical condition. Furthermore, we show numerical results on the nonequilibrium surface tension that help to explain the discrepancy between our numerically determined static contact angle dependence of the critical Bond number and its sharp-interface counterpart based on a static stability analysis of equilibrium shapes after numerical integration of the Young-Laplace equation. Finally, we show the influence of static contact angle and distance to the critical condition on the temporal evolution of the minimum neck radius in the necking regime of drop detachment.

  7. Pressure and surface tension of an active simple liquid: a comparison between kinetic, mechanical and free-energy based approaches.

    Science.gov (United States)

    Marini Bettolo Marconi, Umberto; Maggi, Claudio; Melchionna, Simone

    2016-06-29

    We discuss different definitions of pressure for a system of active spherical particles driven by a non-thermal coloured noise. We show that mechanical, kinetic and free-energy based approaches lead to the same result up to first order in the non-equilibrium expansion parameter. The first prescription is based on a generalisation of the kinetic mesoscopic virial equation and expresses the pressure exerted on the walls in terms of the average of the virial of the inter-particle forces. In the second approach, the pressure and the surface tension are identified with the volume and area derivatives, respectively, of the partition function associated with the known stationary non-equilibrium distribution of the model. The third method is a mechanical approach and is related to the work necessary to deform the system. The pressure is obtained by comparing the expression of the work in terms of local stress and strain with the corresponding expression in terms of microscopic distribution. This is determined from the force balance encoded in the Born-Green-Yvon equation. Such a method has the advantage of giving a formula for the local pressure tensor and the surface tension even in inhomogeneous situations. By direct inspection, we show that the three procedures lead to the same values of the pressure, and give support to the idea that the partition function, obtained via the unified coloured noise approximation, is more than a formal property of the system, but determines the stationary non-equilibrium thermodynamics of the model.

  8. COMPARISON OF INTERFACIAL SURFACE TENSION AND CAPILLARITY OF MAXILLARY COMPLETE DENTURES, FABRICATED BY CONVENTIONAL CUVETTE TECHNIQUE AND INJECTION MOLDING TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Kalina Georgieva

    2016-09-01

    Full Text Available Purpose: The purpose of this in vivo study is to register the forces necessary to displace maxillary complete dentures fabricated by compression molding and injection molding techniques on one and the same patient and to compare the interfacial surface tension and capillarity which are achieved by both techniques. Material/Methods: Two maxillary complete dentures are made for each patient (total number of patients is 30 using both technologies. The magnitude of dislodging force is measured by a dynamometer. Results: Mean ± standard deviation for conventional cuvette technique is 17,53N ± 12,11N. Mean ± standard deviation for injection molding technique is 20,73N ± 13,89N. Analysis of variance (ANOVA revealed statistically significant differences in results achieved by conventional cuvette technique and injection molding technology. The results of injection technique were higher than those of compression molding technique (F=123,676, p< 0,001. Conclusions: Based on the results we suggest a standard for dislodging force of maxillary complete dentures fabricated by conventional cuvette technique- 13N, and by injection molding technology-15,5N. These values would guarantee good interfacial surface tension and capillarity. The injection molding technique was found to produce better fitting maxillary complete dentures when compared to compression molding technique. This would ensure better retention, less traumatic manifestations after insertion and higher patient’s comfort and satisfaction.

  9. Investigation of Surface Tensions for Pure Fluids outside and inside the Critical Region

    Institute of Scientific and Technical Information of China (English)

    FU Dong

    2006-01-01

    An equation of state (EOS) applicable for both the uniform and non-uniform fluids was established by using the density-gradient expansion, in which the influence parameter κ[ρ(r),T] was obtained by the use of direct correlation function. The density functional theory (DFT) provides a framework under which both the phase equilibria and interfacial properties can be investigated within a single set of molecular parameters. The phase equilibria inside the critical region can be improved by the renormalization group theory (RGT). However, the correction of interfacial properties by DFT and RGT is computationaily difficult. In the present work, the density gradient theory (DGT) in which κ[ρ(r),T] is treated as a constant is used to combine with the RGT for interfacial properties inside the critical region.

  10. FORMATION OF GRADIENT COATING OF Fe-BASED ALLOY WITH RARE EARTHS BY PLASMA SURFACING

    Institute of Scientific and Technical Information of China (English)

    L.J.Shang; A.Q.Sun; J.F.Chen; C.M.Zhang; Q.K.Cai

    2004-01-01

    A gradient coating of Fe-based alloy was manufactured with rare earths (RE) by plasma surfacing on Q235 steel substrate. The coatings were studied by using X-ray diffraction (XRD),scanning electron microscope(SEM),differential thermal analyzer (DTA ),and electron probe micro-analyzer (EPMA). The results show that the phases of the two kinds of coatings(with and without RE) both include α-Fe, Fe7C3, Fe3C, Cr2B, Fe2B and FeB. The microstructure ofF314 coating is mainly hypereutectic, the pro-phases Cr7C3 and Cr2B are loose, crassi, spiculate and contain microcracks. The brittleness of the coating is high, and the average hardness is 787 HV. When 0.8wt% RE was added into the F314 alloy, the microstructure varied from hypoeutectic to hypereutectic continuously, The hardness appears as gradient distribution with the highest value of 773 HV, meanwhile, the brittleness decreases significantly. The formation of gradient structure depends on the fallowing factors: (i) the conversion of RE. The addition of RE lowers the elements point and Fe-C eutectic temperature, thus the base metal melting acutely. (ii) the heating of plasma arc.Graded temperature results in directional solidification, thus the gradient structure forms easily. The main reasons for the hardness decrease with RE addition in the alloy are the ratio of hard phase lowering and the hardness of the hard phase decreasing.

  11. Microhardness changes gradient of the duplex stainless steel (DSS surface layer after dry turning

    Directory of Open Access Journals (Sweden)

    G. Krolczyk

    2014-10-01

    Full Text Available The article presents the gradient of microhardness changes as a function of the distance from the material surface after turning with a wedge provided with a coating with a ceramic intermediate layer. The investigation comprised the influence of cutting speed on surface integrity microhardness in dry machining. The tested material was duplex stainless steel (DSS with two-phase, ferritic-austenitic structure. The tests have been performed under production conditions during machining of parts for electric motors and deep-well pumps.

  12. Analysis on MHD Stability of Free Surface Jet flow in a Gradient Magnetic Fields

    Institute of Scientific and Technical Information of China (English)

    许增裕; 康伟山; 潘传杰

    2004-01-01

    The simplified modeling for analysis on MHD stability of free surface jet flow in a gradient magnetic fields is based on the theoretical and experimental results on channel liquid metal MHD flow, especially, the results of MHD flow velocity distribution in cross-section of channels (rectangular duct and circular pipe), and the expected results from the modeling are well agreed with the recent experimental data obtained. It is the first modeling which can efficiently explain the experimental results of liquid-metal free surface jet flow.

  13. Surface tension and disjoining pressure of free-standing smectic films above the bulk smectic-A-isotropic transition temperature

    Energy Technology Data Exchange (ETDEWEB)

    Zakharov, A. V., E-mail: avz0911@yahoo.com [Saint Petersburg Institute for Machine Sciences, The Russian Academy of Sciences, Saint Petersburg 199178 (Russian Federation); Śliwa, Izabela, E-mail: izasliwa@ifmpan.poznan.pl [Institute of Molecular Physics, Polish Academy of Sciences, Smoluchowskiego 17, 60-179 Poznan (Poland)

    2014-03-28

    We have carried out a numerical study of both the structural and thermodynamic properties of free-standing smectic films for the case of enhanced pair interaction in the bounding layers. Calculations, based upon the extended McMillan's mean-field theory with anisotropic forces, show that the layer-thinning transitions are characterized by abrupt drops to lower values, both for a disjoining pressure and a fluctuation-induced long-range interaction between the smectic film surfaces, and then continues to increase with a larger positive slope. Reasonable agreement between the theoretically predicted and the experimentally obtained data on the surface tension of the partially fluorinated 5-n-alkyl-2-(4-n-(perfluoroalkyl-metheleneoxy)phenyl) film has been obtained.

  14. Pair correlation functions and the wavevector-dependent surface tension in a simple density functional treatment of the liquid-vapour interface

    Science.gov (United States)

    Parry, A. O.; Rascón, C.; Willis, G.; Evans, R.

    2014-09-01

    We study the density-density correlation function G(r, r‧) in the interfacial region of a fluid (or Ising-like magnet) with short-ranged interactions using square gradient density functional theory. Adopting a simple double parabola approximation for the bulk free-energy density, we first show that the parallel Fourier transform G(z, z‧ q) and local structure factor S(z q) separate into bulk and excess contributions. We attempt to account for both contributions by deriving an interfacial Hamiltonian, characterised by a wavevector dependent surface tension σ(q), and then reconstructing density correlations from correlations in the interface position. We show that the standard crossing criterion identification of the interface, as a surface of fixed density (or magnetization), does not explain the separation of G(z, z‧ q) and the form of the excess contribution. We propose an alternative definition of the interface position based on the properties of correlations between points that ‘float’ with the surface and show that this describes the full q and z dependence of the excess contributions to both G and S. However, neither the ‘crossing-criterion’ nor the new ‘floating interface’ definition of σ(q) are quantities directly measurable from the total structure factor Stot(q) which contains additional q dependence arising from the non-local relation between fluctuations in the interfacial position and local density. Since it is the total structure factor that is measured experimentally or in simulations, our results have repercussions for earlier attempts to extract and interpret σ(q).

  15. AN IN SITU SURFACE COMPOSITE AND GRADIENT MATERIALOF Al-Si ALLOY PRODUCED BY ELECTROMAGNETIC FORCE

    Institute of Scientific and Technical Information of China (English)

    Z.M. Xu; T.X. Li; Z.L. Zhu; Y.H. Zhou

    2001-01-01

    Because of the different conductivities between the primary phase (law electric conductivity) and the metal melt, electromagnetic force scarcely acts on the primary phase.Thus, an electromagnetic repulsive force applied by the metal melt exerts on the primary phase when the movement of the melt in the direction of electromagnetic force is limited. As a result, the repulsive force exerts on the primary phase to push them to move in the direction opposite to that of the electromagnetic force when the metal melt with primary phase solidifies under an electromagnetic force field. Based on this,a new method for production of in situ surface composite and gradient material by electromagnetic force is proposed. An in situ primary Si reinforced surface composite of Al-15wt%Si alloy and gradient material of Al-19wt%Si alloy were produced by this method. The microhardness of the primary Si is HV1320. The reinforced phase size is in the range from 40μm to 100μm. The wear resistance of Al-Si alloy gradient material can be more greatly increased than that of their matrix material.``

  16. A gradient-based model parametrization using Bernstein polynomials in Bayesian inversion of surface wave dispersion

    Science.gov (United States)

    Gosselin, Jeremy M.; Dosso, Stan E.; Cassidy, John F.; Quijano, Jorge E.; Molnar, Sheri; Dettmer, Jan

    2017-10-01

    This paper develops and applies a Bernstein-polynomial parametrization to efficiently represent general, gradient-based profiles in nonlinear geophysical inversion, with application to ambient-noise Rayleigh-wave dispersion data. Bernstein polynomials provide a stable parametrization in that small perturbations to the model parameters (basis-function coefficients) result in only small perturbations to the geophysical parameter profile. A fully nonlinear Bayesian inversion methodology is applied to estimate shear wave velocity (VS) profiles and uncertainties from surface wave dispersion data extracted from ambient seismic noise. The Bayesian information criterion is used to determine the appropriate polynomial order consistent with the resolving power of the data. Data error correlations are accounted for in the inversion using a parametric autoregressive model. The inversion solution is defined in terms of marginal posterior probability profiles for VS as a function of depth, estimated using Metropolis-Hastings sampling with parallel tempering. This methodology is applied to synthetic dispersion data as well as data processed from passive array recordings collected on the Fraser River Delta in British Columbia, Canada. Results from this work are in good agreement with previous studies, as well as with co-located invasive measurements. The approach considered here is better suited than `layered' modelling approaches in applications where smooth gradients in geophysical parameters are expected, such as soil/sediment profiles. Further, the Bernstein polynomial representation is more general than smooth models based on a fixed choice of gradient type (e.g. power-law gradient) because the form of the gradient is determined objectively by the data, rather than by a subjective parametrization choice.

  17. Link between convection and meridional gradient of sea surface temperature in the Bay of Bengal

    Indian Academy of Sciences (India)

    D Shankar; S R Shetye; P V Joseph

    2007-10-01

    We use daily satellite estimates of sea surface temperature (SST)and rainfall during 1998 –2005 to show that onset of convection over the central Bay of Bengal (88-92°E, 14-18°N)during the core summer monsoon (mid-May to September)is linked to the meridional gradient of SST in the bay.The SST gradient was computed between two boxes in the northern (88-92°E, 18-22°N) and southern (82-88°E, 4-8°N) bay; the latter is the area of the cold tongue in the bay linked to the Summer Monsoon Current.Convection over central bay followed the SST difference between the northern and southern bay ( ) exceeding 0.75°C in 28 cases.There was no instance of exceeding this threshold without a burst in convection.There were,however,five instances of convection occurring without this SST gradient.Long rainfall events (events lasting more than a week)were associated with an SST event ( ≥ 0.75°C);rainfall events tended to be short when not associated with an SST event.The SST gradient was important for the onset of convection, but not for its persistence:convection often persisted for several days even after the SST gradient weakened.The lag between exceeding 0.75°C and the onset of convection was 0-18 days,but the lag histogram peaked at one week.In 75% of the 28 cases,convection occurred within a week of exceeding the threshold of 0.75°C. The northern bay SST, contributed more to but it was a weaker criterion for convection than the SST gradient.A sensitivity analysis showed that the corresponding threshold for was 29°C. We hypothesise that the excess heating (∼1° C above the threshold for deep convection)required in the northern bay to trigger convection is because this excess in SST is what is required to establish the critical SST gradient.

  18. Mechanical Behavior of Ultrafine Gradient Grain Structures Produced via Ambient and Cryogenic Surface Mechanical Attrition Treatment in Iron

    Directory of Open Access Journals (Sweden)

    Heather A. Murdoch

    2015-06-01

    Full Text Available Ambient and cryogenic surface mechanical attrition treatments (SMAT are applied to bcc iron plate. Both processes result in significant surface grain refinement down to the ultrafine-grained regime; the cryogenic treatment results in a 45% greater grain size reduction. However, the refined region is shallower in the cryogenic SMAT process. The tensile ductility of the grain size gradient remains low (<10%, in line with the expected behavior of the refined surface grains. Good tensile ductility in a grain size gradient requires the continuation of the gradient into an undeformed region.

  19. Modeling of Surface Tension and Viscosity for Non-electrolyte Systems by Means of the Equation of State for Square-well Chain Fluids with Variable Interaction Range

    Institute of Scientific and Technical Information of China (English)

    LI Jinlong; HE Changchun; MA Jun; PENG Changjun; LIU Honglai; HU Ying

    2011-01-01

    The equation of state(EOS)for square-well chain fluid with variable range(SWCF-VR) developed in our previous work based on statistical mechanical theory for chemical association is employed for the correlations of surface tension and viscosity of common fluids and ionic liquids(ILs).A model of surface tension for multi-component mixtures is presented by combining the SWCF-VR EOS and the scaled particle theory and used to produce the surface tension of binary and ternary mixtures.The predicted surface tensions are in excellent agreement with the experimental data with an overall average absolute relative deviation(AAD)of 0.36%.A method for the calculation of dynamic viscosity of common fluids and ILs at high pressure is presented by combining Eyring’s rate theory of viscosity and the SWCF-VR EOS.The calculated viscosities are in good agreement with the experimental data with the overall AAD of 1.44% for 14 fluids in 84 cases.The salient feature is that the molecular parameters used in these models are self-consistent and can be applied to calculate different thermodynamic properties such as pVT,vapor-liquid equilibrium,caloric properties,surface tension,and viscosity.

  20. Surface tension of non-ideal binary and ternary liquid mixtures at various temperatures and p = 81.5 kPa

    Energy Technology Data Exchange (ETDEWEB)

    Rafati, A.A., E-mail: rafati_aa@yahoo.co [Department of Physical Chemistry, Faculty of Chemistry, Bu-Ali Sina University, Hamedan 65174 (Iran, Islamic Republic of); Bagheri, A. [Department of Physical Chemistry, Faculty of Chemistry, Bu-Ali Sina University, Hamedan 65174 (Iran, Islamic Republic of); Najafi, M. [Department of Material Engineering, Hamedan University of Technology, Hamedan (Iran, Islamic Republic of)

    2011-03-15

    Experimental surface tensions for binary mixtures (1,2-ethandiol + water), (1,2-ethandiol + acetonitrile), and (acetonitrile + water) at temperatures of 283.15 K, 298.15 K, and 308.15 K and the ternary mixture (1,2-ethandiol/water/acetonitrile) at 298.15 K have been measured with the Du Nouey ring tensiometer. The surface tension of the above mentioned binary and ternary systems were correlated with empirical and thermodynamic based models. The methods of Pando et al. and Ku et al. were used to correlate the ternary surface tension data. The Fu et al., Kalies et al. and Wang et al. models were also applied to predict surface tension in the ternary system. The mean average absolute deviations obtained from the comparison of experimental and calculated surface tension values for ternary system with three models are less than 2.4%, which leads to concluding that these models show a good accuracy in different situations in comparison with other predictive equations.

  1. Functionalized PDMS with versatile and scalable surface roughness gradients for cell culture

    KAUST Repository

    Zhou, Bingpu

    2015-07-21

    This manuscript describes a simple and versatile approach to engineering surface roughness gradients via combination of microfluidics and photo-polymerization. Through UV-mediated polymerization, N-isopropylacrylamide with concentration gradients are successfully grafted onto PDMS surface, leading to diverse roughness degrees on the obtained PDMS substrate. Furthermore, the extent of surface roughness can be controllably regulated via tuning the flow rate ratio between the monomer solution and deionized water. Average roughness ranging from 8.050 nm to 151.68 nm has well been achieved in this work. Such PDMS samples are also demonstrated to be capable of working as supporting substrates for controlling cell adhesion or detachment. Due to the different degrees of surface roughness on a single substrate, our method provides an effective approach for designing advanced surafecs for cell culture. Finally, the thermosensitive property of N-isopropylacrylamide makes our sample furnish as another means for controlling the cell detachment from the substrates with correspondence to the surrounding temperature.

  2. Bacterial deposition to fluoridated and non-fluoridated polyurethane coatings with different elastic modulus and surface tension in a parallel plate and a stagnation point flow chamber

    NARCIS (Netherlands)

    Bakker, D.P.; Huijs, F.M.; Vries, J. de; Klijnstra, J.W.; Busscher, H.J.; Mei, H.C. van der

    2003-01-01

    Deposition of three marine bacterial strains with different cell surface hydrophobicities from artificial seawater to polyurethane coatings on glass with different surface tensions and elastic modulus was studied in situ in a parallel plate (PP) and stagnation point (SP) flow chamber. Different surf

  3. 静滴法测表面张力中各参数的确定%Parameters in Surface Tension Measured by Sessile Drop Method

    Institute of Scientific and Technical Information of China (English)

    陈安涛; 张胜全; 王胜

    2013-01-01

    Combining digital photography with AutoCAD and Proe,the parameters in surface tension measured by sessile drop method was determined.The results show that the method for calculating the surface tension has high accuracy,which can provide computer aid for adopting sessile drop method measuring high temperature metal surface tension.%应用致码撮影与电脑软件AutoCAD和Proe相结合的方法,确定静滴法计算表面张力公式中的各参数值.结果表明,该方法计算的表面张力具有较高精度,为静滴法测量高温金属表面张力提供电脑辅助.

  4. Improvements, testing and development of the ADM-{\\tau} sub-grid surface tension model for two-phase LES

    CERN Document Server

    Aniszewski, Wojciech

    2016-01-01

    In this paper, a specific subgrid term occurring in Large Eddy Simulation (LES) of two-phase flows is investigated. This and other subgrid terms are presented, we subsequently elaborate on the existing models for those and re-formulate the ADM-{\\tau} model for sub-grid surface tension previously published by these authors. This paper presents a substantial, conceptual simplification over the original model version, accompanied by a decrease in its computational cost. At the same time, it addresses the issues the original model version faced, e.g. introduces non-isotropic applicability criteria based on resolved interface's principal curvature radii. Additionally, this paper introduces more throughout testing of the ADM-{\\tau}, in both simple and complex flows.

  5. Variant of a volume-of-fluid method for surface tension-dominant two-phase flows

    Indian Academy of Sciences (India)

    G Biswas

    2013-12-01

    The capabilities of the volume-of-fluid method for the calculation of surface tension-dominant two-phase flows are explained. The accurate calculation of the interface remains a problem for the volume-of-fluid method if the density ratios of the fluids in different phases are high. The simulations of bubble growth is performed in water at near critical pressure for different degrees of superheat using combined levelset and volume-of fluid (CLSVOF) method. The effect of superheat on the frequency of bubble formation was analyzed. A deviation from the periodic bubble release is observed in the case of superheat of 20 K in water. The vapor-jet-like columnar structure is observed. Effect of heat flux on the slender vapor column has also been explained.

  6. Influence of Contact Angle, Growth Angle and Melt Surface Tension on Detached Solidification of InSb

    Science.gov (United States)

    Wang, Yazhen; Regel, Liya L.; Wilcox, William R.

    2000-01-01

    We extended the previous analysis of detached solidification of InSb based on the moving meniscus model. We found that for steady detached solidification to occur in a sealed ampoule in zero gravity, it is necessary for the growth angle to exceed a critical value, the contact angle for the melt on the ampoule wall to exceed a critical value, and the melt-gas surface tension to be below a critical value. These critical values would depend on the material properties and the growth parameters. For the conditions examined here, the sum of the growth angle and the contact angle must exceed approximately 130, which is significantly less than required if both ends of the ampoule are open.

  7. Molecular dynamics determination of the surface tension of silver-gold liquid alloys and the Tolman length of nanoalloys

    Science.gov (United States)

    Calvo, F.

    2012-04-01

    Using molecular dynamics simulations, an embedded-atom model potential, and the mechanistic route, we have computed the pressure tensor and the surface tension γ of Ag-Au liquid alloys. Although the model generally underestimates γ for pure metals, calculations for a bulk planar slab exhibit nonlinear variations of γ with increasing gold concentration, which agree with experiments and can be accounted for by a perfect solution model. Calculations for various nanoscale droplets containing between 100 and 3200 atoms show a systematic decrease of γ with increasing droplet radius R. The positive Tolman length of the alloy determined from these size variations is estimated to vary slightly with gold concentration. The effects of temperature in the range 1300-1700 K are discussed.

  8. Effect of fast mold surface temperature evolution on iPP part morphology gradients

    Energy Technology Data Exchange (ETDEWEB)

    Liparoti, Sara [Department of Industrial Engineering, University of Salerno, via Giovanni Paolo II, 132, 84084 Fisciano (Italy); Sorrentino, Andrea [Institute for Polymers, Composites and Biomaterials (IPCB), National Research Council (CNR), P. Enrico Fermi 1, 80055 Portici (Italy); Guzman, Gustavo; Cakmak, Mukerrem; Titomanlio, Giuseppe, E-mail: gtitomanlio@unisa.it [Department of Polymer Engineering, The University of Akron, Akron, OH 44325 (United States)

    2016-03-09

    The control of mold surface temperature is an important factor that affects the sample surface morphology as well as the structural gradients (orientation crystal size, and type) as well as cooling stresses. The frozen layer thickness formed during the filling stage also has a very significant effect on the flow resistance and thus on the resulting pressure drop and flow length in thin wall parts. The possibility to have a hot mold during filling and a quick cooling soon afterward is a significant process enhancement particularly for specialized applications such as micro injection molding and for the reproduction of micro structured surfaces. Up to now, several methods (electromagnetic, infrared, hot vapor fleshing etc,) were tried to achieve fast temperature evolution of the mold. Unfortunately, all these methods require a complex balance between thermal and mechanical problems, equipment cost, energy consumption, safety, molding cycle time and part quality achievable. In this work, a thin electrical resistance was designed and used to generate a fast and confined temperature variation on mold surface (by joule effect). Since the whole temperature evolution can take place in a few seconds, one can couple the advantages of a high surface temperature during filling with the advantages of a low mold temperature, fast cooling and low heating dissipation. Some experiments were performed with a commercial iPP resin. The effects of the surface temperature and of the heating time (under constant electric power) on surface finishing and on the final morphology (thickness and structure of the different layers) are explored and discussed.

  9. Determining the association constant and adsorption properties of ion pairs in water by fitting surface tension data.

    Science.gov (United States)

    Pradines, Vincent; Lavabre, Dominique; Micheau, Jean-Claude; Pimienta, Véronique

    2005-11-22

    Association constants and adsorption parameters of tetraalkylammoniumdodecyl sulfate (TAADS) ion pairs in water were determined. We have analyzed water/air surface tension measurements obtained for mixtures of sodium dodecyl sulfate (SDS) and tetraalkylammonium bromide of increasing chain lengths (TMAB, TEAB, TPAB, and TBAB). To reproduce the experimental isotherms, we coupled the association equilibrium of the ion pairs to the equations proposed by Fainerman and co-workers to model the adsorption of binary mixtures of surfactants (SDS and TAADS) with different molar areas at a nonideal surface layer. The parameters found showed that the model is not convenient to describe the effect of the addition of TMAB but a clear coherency was obtained for the three longer compounds. Ranging from TEADS to TBADS increasing hydrophobic interactions give rise to a higher associability but to a lower surface activity. Self-interactions coefficients extracted by the fitting procedure confirmed the importance of attractive interactions between the ion pairs. The calculated surface coverage showed that in every case the compound mainly adsorbed at the interface was the ion pair. For TBADS strong attractive interactions result in a phase transition at very low concentration.

  10. Simultaneous decay of contact-angle and surface-tension during the rehydration of air-dried root mucilage

    Science.gov (United States)

    Arye, Gilboa; Chen, Fengxian

    2016-04-01

    Plants can extract or exude water and solutes at their root surface. Among the root exudates, the mucilage exhibits a surfactant like properties - depressing the surface-tension (ST, mN/m) at the water-air interface. The amphipathic nature of some of the mucilage molecules (e.g. lipids) is thought to be the reason for its surfactant like behavior. As the rhizosphere dries out, re-orientation and/or re-configuration of amphipathic molecules at the solid-air interface, may impart hydrophobic nature to the rhizosphere. Our current knowledge on the ST of natural and/or model root mucilage is based on measurements of the equilibrium ST. However, adsorption of amphipathic molecules at the water-air interface is not reached instantaneously. The hydrophobic nature of the rhizosphere was deduced from the initial advancing CA, commonly calculated from the first few milliseconds up to few seconds (depending on the method employed). We hypothesized that during the rehydration of the root mucilage; both quantities are dynamic. Processes such as water absorbance and dissolution, may vary the interfacial tensions as a function of time. Consequently, simultaneous reduction of both CA and ST as a function of time can be expected. The main objective of this study was to characterize and quantify the extent, persistency and dynamic of the CA and ST during rehydration of air-dried root mucilage. The study was involved with measurements of dynamic and equilibrium ST using the pedant drop or Wilhelmy plate method, respectively. Glass slides were coated with naturally occurring or model root mucilage and the CA of a sessile drop was measured optically, as a function of time. The results were analyzed based on the Young-Dupré and Young-Laplace equations, from which the simultaneous decay of CA and ST was deduced. The implication for the wettability and water flow in the rhizosphere will be discussed.

  11. Type the title of your paper here Effect of the focused light from the xenon arc lamp on the surface tension of the molten enamel

    Science.gov (United States)

    Aleutdinov, A. D.; Ghyngazov, S. A.; Mylnikova, T. S.; Aleutdinov, K. A.

    2016-02-01

    The effect of exposure to the focused light from the xenon arc lamp on the surface tension of molten enamels was studied with a designed light beam setup as compared to that observed in conventional heating in a resistance furnace. The objects under investigation were enamels No. 261, UES-200 and UES-300. The power density of the light beam was varied in the range of (30-80) W/cm2. When exposed to light, the surface tension is shown to be an order of magnitude lower than that obtained in conventional furnace heating.

  12. Molecular-Level Insight of the Effect of Hofmeister Anions on the Interfacial Surface Tension of a Model Protein

    Energy Technology Data Exchange (ETDEWEB)

    Willow, Soohaeng Yoo; Xantheas, Sotiris S.

    2017-03-21

    The effect of the Hofmeister anion series on the structure and stability of proteins is often discussed using simple systems such as a water-vapor interface with the assumption that the vapor region mimics the hydrophobic surface. Microscopic theories suggest that the Hofmeister anion series is highly correlated with the different contributions of the various ions to the surface tension of such a water-vapor interface. Proteins, however, have both hydrophobic and hydrophilic regions rather than just a pure hydrophobic one. Using a solvated parallel β -sheet layer consisting of both hydrophobic and positively charged hydrophilic surfaces as a more realistic model to represent a protein surface, we investigated the interaction of such a system with hydrophilic-like (SO42-) and hydrophobic-like (ClO4-) anions via Born-Oppenheimer Molecular Dynamics (BOMD) simulations. We found that both the SO42- and ClO4- anions prefer to reside on the hydrophilic rather than on the hydrophobic surface of the parallel β -sheet layer. In addition, our simulations suggest that the ClO4- ions not only penetrate towards the peptide groups through the hydrophilic residues, but also allow water molecules to penetrate as well to form water-peptide hydrogen bonds, while the SO42- ions stabilize the interface of the water-hydrophilic surface. Our results render a plausible explanation of why hydrophobic-like Hofmeister anions act as protein denaturants. This work was supported by the US Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences and Biosciences. Pacific Northwest National Laboratory (PNNL) is a multiprogram national laboratory operated for DOE by Battelle.

  13. On the physically based modeling of surface tension and moving contact lines with dynamic contact angles on the continuum scale

    Science.gov (United States)

    Huber, M.; Keller, F.; Säckel, W.; Hirschler, M.; Kunz, P.; Hassanizadeh, S. M.; Nieken, U.

    2016-04-01

    The description of wetting phenomena is a challenging problem on every considerable length-scale. The behavior of interfaces and contact lines on the continuum scale is caused by intermolecular interactions like the Van der Waals forces. Therefore, to describe surface tension and the resulting dynamics of interfaces and contact lines on the continuum scale, appropriate formulations must be developed. While the Continuum Surface Force (CSF) model is well-engineered for the description of interfaces, there is still a lack of treatment of contact lines, which are defined by the intersection of an ending fluid interface and a solid boundary surface. In our approach we use a balance equation for the contact line and extend the Navier-Stokes equations in analogy to the extension of a two-phase interface in the CSF model. Since this model depicts a physically motivated approach on the continuum scale, no fitting parameters are introduced and the deterministic description leads to a dynamical evolution of the system. As verification of our theory, we show a Smoothed Particle Hydrodynamics (SPH) model and simulate the evolution of droplet shapes and their corresponding contact angles.

  14. [Distribution of soil organic carbon in surface soil along a precipitation gradient in loess hilly area].

    Science.gov (United States)

    Sun, Long; Zhang, Guang-hui; Luan, Li-li; Li, Zhen-wei; Geng, Ren

    2016-02-01

    Along the 368-591 mm precipitation gradient, 7 survey sites, i.e. a total 63 investigated plots were selected. At each sites, woodland, grassland, and cropland with similar restoration age were selected to investigate soil organic carbon distribution in surface soil (0-30 cm), and the influence of factors, e.g. climate, soil depth, and land uses, on soil organic carbon distribution were analyzed. The result showed that, along the precipitation gradient, the grassland (8.70 g . kg-1) > woodland (7.88 g . kg-1) > farmland (7.73 g . kg-1) in concentration and the grassland (20.28 kg . m-2) > farmland (19.34 kg . m-2) > woodland (17.14 kg . m-2) in density. The differences of soil organic carbon concentration of three land uses were not significant. Further analysis of pooled data of three land uses showed that the surface soil organic carbon concentration differed significantly at different precipitation levels (Psoil organic carbon concentration (r=0.838, Psoil organic carbon increased with annual precipitation 0. 04 g . kg-1 . mm-1, density 0.08 kg . m-2 . mm-1. The soil organic carbon distribution was predicted with mean annual precipitation, soil clay content, plant litter in woodland, and root density in farmland.

  15. Can surface cracks and unipolar arcs explain breakdown and gradient limits?

    CERN Document Server

    Norem, Jim

    2012-01-01

    We argue that the physics of unipolar arcs and surface cracks can help understand rf breakdown, and vacuum arc data. We outline a model of the basic mechanisms involved in breakdown and explore how the physics of unipolar arcs and cracks can simplify the picture of breakdown and gradient limits in accelerators, tokamaks as well as laser ablation, micrometeorites and other applications. Cracks are commonly seen in SEM images of arc damage and they are produced as the liquid metal cools, they produce the required field enhancements to explain field emission data data and can produce fractures that would trigger breakdown events. Unipolar arcs can produce currents sufficient to short out rf structures, should cause the sort of damage seen in SEM images, should be unstable and possibly self-quenching as seen in optical fluctuations and surface damage.

  16. Solubility of N2O in and density, viscosity, and surface tension of aqueous piperazine solutions

    NARCIS (Netherlands)

    Derks, P. W.; Hogendoorn, K. J.; Versteeg, G. F.

    2005-01-01

    The physical solubility of N2O in and the density and viscosity of aqueous piperazine solutions have been measured over a temperature range of (293.15 to 323.15) K for piperazine concentrations ranging from about (0.6 to 1.8) kmol·mr-3. Furthermore, the present study contains experimental surface

  17. Solubility of N2O in and density, viscosity, and surface tension of aqueous piperazine solutions

    NARCIS (Netherlands)

    Derks, P. W.; Hogendoorn, K. J.; Versteeg, G. F.

    2005-01-01

    The physical solubility of N2O in and the density and viscosity of aqueous piperazine solutions have been measured over a temperature range of (293.15 to 323.15) K for piperazine concentrations ranging from about (0.6 to 1.8) kmol·mr-3. Furthermore, the present study contains experimental surface t

  18. Electrochemical fabrication of surface chemical gradients in thiol self-assembled monolayers with tailored work-functions.

    Science.gov (United States)

    Fioravanti, Giulia; Lugli, Francesca; Gentili, Denis; Mucciante, Vittoria; Leonardi, Francesca; Pasquali, Luca; Liscio, Andrea; Murgia, Mauro; Zerbetto, Francesco; Cavallini, Massimiliano

    2014-10-01

    The studies on surface chemical gradients are constantly gaining interest both for fundamental studies and for technological implications in materials science, nanofluidics, dewetting, and biological systems. Here we report on a new approach that is very simple and very efficient, to fabricate surface chemical gradients of alkanethiols, which combines electrochemical desorption/partial readsorption, with the withdrawal of the surface from the solution. The gradient is then stabilized by adding a complementary thiol terminated with a hydroxyl group with a chain length comparable to desorbed thiols. This procedure allows us to fabricate a chemical gradient of the wetting properties and the substrate work-function along a few centimeters with a gradient slope higher than 5°/cm. Samples were characterized by cyclic voltammetry during desorption, static contact angle, XPS analysis, and Kelvin probe. Computer simulations based on the Dissipative Particle Dynamics methods were carried out considering a water droplet on a mixed SAM surface. The results help to rationalize the composition of the chemical gradient at different position on the Au surface.

  19. Curvature effects on the surface thickness and tension at the free interface of $^4$He systems

    OpenAIRE

    Szybisz, Leszek; Urrutia, Ignacio

    2003-01-01

    The thickness $W$ and the surface energy $\\sigma_A$ at the free interface of superfluid $^4$He are studied. Results of calculations carried out by using density functionals for cylindrical and spherical systems are presented in a unified way, including a comparison with the behavior of planar slabs. It is found that for large species $W$ is independent of the geometry. The obtained values of $W$ are compared with prior theoretical results and experimental data. Experimental data favor results...

  20. Basic surface properties of Aedes albopictus cells: effect of Mayaro virus infection on electrostatic charge and surface tension.

    Science.gov (United States)

    Mezêncio, J M; Costa e Silva Filho, F; Rebello, M A

    1997-01-01

    Aedes albopictus cells possess a negative cell surface charge of -12.7 mV with an isoelectrophoretic point (IEP) located between pH 3.0 and 4.0. Infection with Mayaro virus rendered the surface of A. albopictus cells less negative reaching a zeta-potential value of -9.7 mV after 100 h of infection. Concomitantly, the IEP of the infected cells were also altered from 3.0-4.0 to 4.0-5.0. Furthermore, the contact angle measurements clearly showed qualitative alterations in the cell surface of infected cells.

  1. Surface tensions of multi-component mixed inorganic/organic aqueous systems of atmospheric significance: measurements, model predictions and importance for cloud activation predictions

    Directory of Open Access Journals (Sweden)

    D. O. Topping

    2007-01-01

    Full Text Available In order to predict the physical properties of aerosol particles, it is necessary to adequately capture the behaviour of the ubiquitous complex organic components. One of the key properties which may affect this behaviour is the contribution of the organic components to the surface tension of aqueous particles in the moist atmosphere. Whilst the qualitative effect of organic compounds on solution surface tensions has been widely reported, our quantitative understanding on mixed organic and mixed inorganic/organic systems is limited. Furthermore, it is unclear whether models that exist in the literature can reproduce the surface tension variability for binary and higher order multi-component organic and mixed inorganic/organic systems of atmospheric significance. The current study aims to resolve both issues to some extent. Surface tensions of single and multiple solute aqueous solutions were measured and compared with predictions from a number of model treatments. On comparison with binary organic systems, two predictive models found in the literature provided a range of values resulting from sensitivity to calculations of pure component surface tensions. Results indicate that a fitted model can capture the variability of the measured data very well, producing the lowest average percentage deviation for all compounds studied. The performance of the other models varies with compound and choice of model parameters. The behaviour of ternary mixed inorganic/organic systems was unreliably captured by using a predictive scheme and this was dependent on the composition of the solutes present. For more atmospherically representative higher order systems, entirely predictive schemes performed poorly. It was found that use of the binary data in a relatively simple mixing rule, or modification of an existing thermodynamic model with parameters derived from binary data, was able to accurately capture the surface tension variation with concentration. Thus

  2. Impact of a Liquid Drop on a Granular Medium: inertia, viscosity and surface tension effects on the drop deformation

    CERN Document Server

    Nefzaoui, Elyes

    2010-01-01

    An experimental study of liquid drop impacts on a granular medium is proposed. Four fluids were used to vary physical properties: pure distilled water, water with glycerol at 2 concentrations 1:1 and 1:2 v/v and water with Tween 20 at the concentration of 0.1g/l. The drop free fall height was varied to obtain a Weber number (We) between 10 and 2000. Results showed that obtained crater morphologies highly depend on the impacting drop kinetic energy E_{K}. Different behaviours during the drop spreading, receding and absorption are highlighted as function of the fluids viscosity and surface tension. Experimental absorption times are also commented and compared with a simplified theoretical model. Drops maximal extensions and craters diameters were found to scale as $We^{1/5}$ and $E_K^{1/5}$ respectively. In both cases, found dependencies are smaller than those reported in literature: $We^{1/4}$ for drop impacts on solid or granular surfaces and $E_K^{1/4}$ for spherical solid impacts on granular media.

  3. Surface-modified concentration-gradient Ni-rich layered oxide cathodes for high-energy lithium-ion batteries

    Science.gov (United States)

    Liao, Jin-Yun; Manthiram, Arumugam

    2015-05-01

    Concentration-gradient layered Li[Ni0.8Co0.2]0.7[Ni0.2Mn0.8]0.3O2 oxide with Ni-rich in the core and Mn-rich in the surface region has been synthesized through a condition-controlled tank reactor reaction. While the Ni-rich core facilitates high capacity, the Mn-rich surface enables good cyclability and thermal stability. The concentration-gradient sample exhibits a higher capacity of 204 mA h g-1 at C/5 rate with superior cyclability and thermal stability compared to the constant-concentration LiNi0.62Co0.14Mn0.24O2 sample, which has the same net Ni, Co, and Mn contents as those present in the concentration-gradient sample. The concentration-gradient sample was also coated with a thin layer of Al2O3 on the surface to stabilize the electrode/electrolyte interface and thereby further improve the electrochemical performance. Both the structural (gradient structure) and surface (Al2O3 coating) modifications help suppress side reactions between electrode and electrolyte and reduce the decline in voltage during cycling. The Al2O3-coated concentration-gradient sample exhibits improved long-term cyclability, rate capability, and thermal stability compared to the pristine uncoated sample.

  4. Capillary electrophoresis in a fused-silica capillary with surface roughness gradient.

    Science.gov (United States)

    Horká, Marie; Šlais, Karel; Karásek, Pavel; Růžička, Filip; Šalplachta, Jiří; Šesták, Jozef; Kahle, Vladislav; Roth, Michal

    2016-10-01

    The electro-osmotic flow, a significant factor in capillary electrophoretic separations, is very sensitive to small changes in structure and surface roughness of the inner surface of fused silica capillary. Besides a number of negative effects, the electro-osmotic flow can also have a positive effect on the separation. An example could be fused silica capillaries with homogenous surface roughness along their entire separation length as produced by etching with supercritical water. Different strains of methicillin-resistant and methicillin-susceptible Staphylococcus aureus were separated on that type of capillaries. In the present study, fused-silica capillaries with a gradient of surface roughness were prepared and their basic behavior was studied in capillary zone electrophoresis with UV-visible detection. First the influence of the electro-osmotic flow on the peak shape of a marker of electro-osmotic flow, thiourea, has been discussed. An antifungal agent, hydrophobic amphotericin B, and a protein marker, albumin, have been used as model analytes. A significant narrowing of the detected zones of the examined analytes was achieved in supercritical-water-treated capillaries as compared to the electrophoretic separation in smooth capillaries. Minimum detectable amounts of 5 ng/mL amphotericin B and 5 μg/mL albumin were reached with this method.

  5. On the characterization of host-guest complexes : Surface tension, calorimetry, and molecular dynamics of cyclodextrins with a non-ionic surfactant

    NARCIS (Netherlands)

    Pineiro, Angel; Banquy, Xavier; Perez-Casas, Silvia; Tovar, Edgar; Garcia, Abel; Villa, Alessandra; Amigo, Alfredo; Mark, Alan E.; Costas, Miguel

    2007-01-01

    Three host-guest systems have been characterized using surface tension (sigma), calorimetry, and molecular dynamics simulations (MD). The hosts were three native cyclodextrins (CD) and the guest the non-ionic carbohydrate surfactant octyl-beta-d-glucopyranoside. It is shown that, for any host-guest

  6. On the characterization of host-guest complexes : Surface tension, calorimetry, and molecular dynamics of cyclodextrins with a non-ionic surfactant

    NARCIS (Netherlands)

    Pineiro, Angel; Banquy, Xavier; Perez-Casas, Silvia; Tovar, Edgar; Garcia, Abel; Villa, Alessandra; Amigo, Alfredo; Mark, Alan E.; Costas, Miguel

    2007-01-01

    Three host-guest systems have been characterized using surface tension (sigma), calorimetry, and molecular dynamics simulations (MD). The hosts were three native cyclodextrins (CD) and the guest the non-ionic carbohydrate surfactant octyl-beta-d-glucopyranoside. It is shown that, for any host-guest

  7. 表面张力系数实验的应用研究%On the Application of Liquid Surface Tension Coefficient Experiment

    Institute of Scientific and Technical Information of China (English)

    葛素红; 孙桂华; 王雅丽

    2014-01-01

    The surface tension coefficient of saline water and sweet water in the same temperature and different densities was measured using the FD-NST-I liquid surface tension coefficient measuring instrument. And the surface tension coefficient of tap -water and purified water in different temperatures was also measured using the same instrument. Results show that the surface tension coefficient is related to temperature and density.%应用拉脱法测量了食盐和白糖溶液的表面张力系数,发现:盐溶液的表面张力系数随着溶液密度的增大而增大,糖溶液的表面张力系数随着浓度的增大而减小。测量了自来水与纯净水在不同环境温度下的表面张力系数,验证了液体表面张力系数随着温度的升高而降低的物理规律。

  8. Improvement of Wetting Tension Values of Battery Foil Surface%电池箔表面润湿张力值的提高

    Institute of Scientific and Technical Information of China (English)

    陈志轩; 刘英超

    2015-01-01

    Measurement method of wetting tension of battery foil surface was introduced, as well as dyne value, liquid dyne, wettability, surface tension, contact angle and so on theoretical knowledge. The effect of rolling oil on surface wetting tension values was analyzed. Experiments show that the surface wetting tension value of the battery foil products can be improved using A70 base oil and about 8% additive proportion.%分析了轧制油对表面润湿张力值的影响,并根据基础油及添加剂比例配置了不同油样,设计了实验,验证不同油样对于产品表面润湿张力值的影响.实验表明,采用A70基础油和8%左右的添加剂比例可以提升电池箔产品的表面润湿张力值.

  9. A Sea-Sky Line Detection Method for Unmanned Surface Vehicles Based on Gradient Saliency.

    Science.gov (United States)

    Wang, Bo; Su, Yumin; Wan, Lei

    2016-04-15

    Special features in real marine environments such as cloud clutter, sea glint and weather conditions always result in various kinds of interference in optical images, which make it very difficult for unmanned surface vehicles (USVs) to detect the sea-sky line (SSL) accurately. To solve this problem a saliency-based SSL detection method is proposed. Through the computation of gradient saliency the line features of SSL are enhanced effectively, while other interference factors are relatively suppressed, and line support regions are obtained by a region growing method on gradient orientation. The SSL identification is achieved according to region contrast, line segment length and orientation features, and optimal state estimation of SSL detection is implemented by introducing a cubature Kalman filter (CKF). In the end, the proposed method is tested on a benchmark dataset from the "XL" USV in a real marine environment, and the experimental results demonstrate that the proposed method is significantly superior to other state-of-the-art methods in terms of accuracy rate and real-time performance, and its accuracy and stability are effectively improved by the CKF.

  10. Surface tension-induced PDMS micro-pillars with controllable tips and tilt angles

    KAUST Repository

    Li, Huawei

    2013-12-21

    This paper reports a novel method to fabricate three-dimensional (3D) polydimethylsiloxane (PDMS) micro-pillars using a CO2 laser-machined poly(methyl methacrylate) (PMMA) mold with through-holes. This method eliminates the requirements of expensive and complicated facilities to fabricate a 3D mold. The micro-pillars were formed by the capillary force that draws PDMS into the through-holes of the PMMA mold. The tilt angles of the micro-pillars depend on the tilt angles of the through-holes in the mold, and the concave and convex micro-lens tip shapes of the PDMS micro-pillars can be modified by changing the surface wettability of the PMMA through-holes.

  11. Long-Wavelength Rupturing Instability in Surface-Tension-Driven Benard Convection

    Science.gov (United States)

    Swift, J. B.; Hook, Stephen J. Van; Becerril, Ricardo; McCormick, W. D.; Swinney, H. L.; Schatz, Michael F.

    1999-01-01

    A liquid layer with a free upper surface and heated from below is subject to thermocapillary-induced convective instabilities. We use very thin liquid layers (0.01 cm) to significantly reduce buoyancy effects and simulate Marangoni convection in microgravity. We observe thermocapillary-driven convection in two qualitatively different modes, short-wavelength Benard hexagonal convection cells and a long-wavelength interfacial rupturing mode. We focus on the long-wavelength mode and present experimental observations and theoretical analyses of the long-wavelength instability. Depending on the depths and thermal conductivities of the liquid and the gas above it, the interface can rupture downwards and form a dry spot or rupture upwards and form a high spot. Linear stability theory gives good agreement to the experimental measurements of onset as long as sidewall effects are taken into account. Nonlinear theory correctly predicts the subcritical nature of the bifurcation and the selection between the dry spot and high spots.

  12. Curvature effects on the surface thickness and tension at the free interface of 4He systems

    Science.gov (United States)

    Szybisz, Leszek; Urrutia, Ignacio

    2003-08-01

    The thickness W and the surface energy σA at the free interface of superfluid 4He are studied. Results of calculations carried out using density functionals for cylindrical and spherical systems are presented in a unified way, including a comparison with the behavior of planar slabs. It is found that for large species W is independent of the geometry. The obtained values of W are compared with prior theoretical results and experimental data. Experimental data favor results evaluated by adopting finite range approaches. The behavior of σA and WσA exhibits overshoots similar to that found previously for the central density, and the trend of these observables towards their asymptotic values is examined.

  13. Cell adhesion and polarisation on molecularly defined spacing gradient surfaces of cyclic RGDfK peptide patches.

    Science.gov (United States)

    Hirschfeld-Warneken, Vera C; Arnold, Marco; Cavalcanti-Adam, Ada; López-García, Mónica; Kessler, Horst; Spatz, Joachim P

    2008-09-01

    In vivo cell migration and location are orchestrally guided by soluble and bound chemical gradients. Here, gradients of extracellular matrix molecules are formed synthetically by the combination of a surface nanopatterning technique called block copolymer nanolithography (BCN) and a biofunctionalisation technique. A modified substrate dip-coating process of BCN allows for the formation of precise molecular gradients of cyclic RGDfK peptide patches at interfaces, which are presented to cells for testing cell adhesion and polarisation. Surfaces formed by BCN consist of hexagonally ordered gold dot patterns with a gradient in particle spacing. Each dot serves as a chemical anchor for the binding of cyclic RGDfK peptides, which are specifically recognised by alpha(v)beta(3) integrins. Due to steric hindrance only up to one integrin binds to one functionalised gold dot which forms a peptide patch spacing. We demonstrate how cell morphology, adhesion area, actin and vinculin distribution as well as cell body polarisation are influenced by the peptide patch spacing gradient. As a consequence, these gradients of adhesive ligands induce cell orientation towards smaller particle spacing when the gradient strength is 15nm/mm at least. This implicates that an adherent cell's sensitivity to differentiate between ligand patch spacing is approximately 1nm across the cell body.

  14. Surface Approximation using Growing Self-Organizing Nets and Gradient Information

    Directory of Open Access Journals (Sweden)

    Jorge Rivera-Rovelo

    2007-01-01

    Full Text Available In this paper we show how to improve the performance of two self-organizing neural networks used to approximate the shape of a 2D or 3D object by incorporating gradient information in the adaptation stage. The methods are based on the growing versions of the Kohonen's map and the neural gas network. Also, we show that in the adaptation stage the network utilizes efficient transformations, expressed as versors in the conformal geometric algebra framework, which build the shape of the object independent of its position in space (coordinate free. Our algorithms were tested with several images, including medical images (CT and MR images. We include also some examples for the case of 3D surface estimation.

  15. Variability of water content useful in surface along a rainfall gradient Mediterranean; Variabilidad de la disposibilidad hidrica superficial para la vegetacion a lo largo de un gradiente pluviometrico

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz-Sinoga, J. D.; Martinez-Murillo, J. F.; Gabarron-Galeote, M. A.

    2009-07-01

    A climatic gradient was defined in South of spain with a great decreased of rainfall from West to East (>1,000 mm), which produces changes in vegetation and hydric resources. this study was carried out in five hill slopes under different climatic conditions and their aims were to analyze: the variability of available water along the gradient since 2002 to 2006, the key factors of it and the influence on the vegetal cover. Results showed that clay content had a great influence in the surface available water for plants, which did not decrease in the deerfield sites, where the amount of days with hydric deficient was lower. Relationships between vegetation and soil water were stronger in the more humid field sites, where existed a feedback between both properties. (Author) 4 refs.

  16. Generation of contact-printing based poly(ethylene glycol) gradient surfaces with micrometer-sized steps.

    Science.gov (United States)

    Cai, Yangjun; Yun, Yang H; Newby, Bi-min Zhang

    2010-01-01

    A surface with a density gradient of poly(ethylene glycol) (PEG) is an attractive substrate for combinatorial studies of biological phenomena. In this study, the generation of discrete step-wise density gradients of PEG utilizing a contact-printing approach is reported. The step-wise gradient template is achieved by contact-printing n-octadecyltrichlorosilane (OTS) to a glass from a hemispherical elastomeric stamp when the stamp is brought into contact with the substrate, and then step-wisely increasing the contact area as the corresponding contact-printing time for the step decreases. A PEG-silane is then used to backfill the unoccupied spaces of the contact printed OTS gradient to generate the OTS-PEG density gradient. Various characterizations, including water contact angle measurement, lateral force microscopy, and X-ray photoelectron spectroscopy, are conducted and confirmed that the surface coverage of OTS increases (or the coverage of PEG decreases) with the increase of contact-printing time of OTS. The step-wise gradient is illustrated by adsorption of a bovine serum albumin labeled with fluorescein isothiocyanate and subsequent attachment of fibroblasts. The amounts of protein adsorption and cellular attachment increase with the decrease of the surface coverage of PEG.

  17. Strain gradient plasticity analysis of elasto-plastic contact between rough surfaces

    Science.gov (United States)

    Song, H.; Van der Giessen, E.; Liu, X.

    2016-11-01

    From a microscopic point of view, the real contact area between two rough surfaces is the sum of the areas of contact between facing asperities. Since the real contact area is a fraction of the nominal contact area, the real contact pressure is much higher than the nominal contact pressure, which results in plastic deformation of asperities. As plasticity is size dependent at size scales below tens of micrometers, with the general trend of smaller being harder, macroscopic plasticity is not suitable to describe plastic deformation of small asperities and thus fails to capture the real contact area and pressure accurately. Here we adopt conventional mechanism-based strain gradient plasticity (CMSGP) to analyze the contact between a rigid platen and an elasto-plastic solid with a rough surface. Flattening of a single sinusoidal asperity is analyzed first to highlight the difference between CMSGP and J2 isotropic plasticity. For the rough surface contact, besides CMSGP, pure elastic and J2 isotropic plasticity analysis is also carried out for comparison. In all cases, the contact area A rises linearly with the applied load, but with a different slope which implies that the mean contact pressures are different. CMSGP produces qualitative changes in the distributions of local contact pressures compared with pure elastic and J2 isotropic plasticity analysis, furthermore, bounded by the two.

  18. Investigation of wettability to evaluate the morphology and surface tension wood filler

    Directory of Open Access Journals (Sweden)

    S. T. Antipov

    2017-01-01

    Full Text Available In this paper, we propose a new scheme of a highly efficient line for preparing safflower grains for processing consisting of an air-sieve separator, a magnetic separator, an ovary, a puppet, and a stone picker. The new after vortex separator is a vibroseparator for separating the products close in physical properties, grinding Machine with a duo-aspirator, a photoseparator and a device for moisture-thermal treatment. Advantages of the proposed line for preparation of safflower grain for processing are that an additional plant in front of the photocarerator of the grinding machine and duo-espirator allows the crest to separate and remove or refine the shell of the seed in the form of a shell layer for more efficient subsequent spectral point analysis, which determines the grain composition for the purpose of sorting it On the basis of chemical composition and color in the photo separator, and sequential placement after the stone separator of a vibro separator for separation of products close in physical properties, a grinding machine with a duo-aspirator, a photoseparator and a device for moisture-thermal treatment, provides an intensification of the technological process of efficient separation of safflower from impurities and its preparation for further processing and Due to the rational layout of equipment.A highly efficient photocell separator is also provided, the advantages of which are that the installation of a storage and vibrating feeder in relation to the slanting tray from the back side and the execution of a smooth curved transition to the vibrating feeder in the upper part of the pitcher allows improving the separation of grain products by reducing the amplitude of grain oscillations, Caused by a rebound from the surface of the tray during the loading of the sorted material from the vibrating feeder.

  19. Viscosity and surface tension effects during multiphase flow in propped fractures

    Science.gov (United States)

    Dzikowski, Michał; Dąbrowski, Marcin

    2017-04-01

    Geological sequestration of CO2 was proposed as an important mechanism to reduce its emission into atmosphere. CO2 exhibits a higher affinity to organic matter than methane molecules and, potentially, it could be pumped and stored in shale reservoirs while enhancing late stage shale gas production. A successful analysis of CO2 sequestration in low matrix permeability rocks such as shales requires a thorough understanding of multiphase flow in stimulated rock fractures, which provide most significant pathways for fluids in such systems. Multiphase fracture flows are also of great relevance to brine, oil and gas migration in petroleum systems, water and stream circulation in geothermal reservoirs, and chemical transport of non-aqueous phase liquids in shallow hydrogeological systems, particularly in partially saturated zones. There are various physical models that describe phenomena taking place during multiphase flow through porous media. One of key aspects that need to be considered are pore-scale effects related to capillarity. Unfortunately, detailed models that describe motion and evolution of phase or component boundary require direct numerical simulations and spatial resolutions that are hard to reach when considering industrial relevant systems. Main aim of the presented work was the development of reduced 2.5D models based on Brinkman approximation of thin domain flow that would be able to capture local scale phenomena without expensive 3D simulations. Presented approach was designed specifically to tackle incompressible and immiscible systems and is based on Continuous Surface Force approach presented by Brackbill et al., implemented using Lattice Boltzmann Method. Presented approach where firstly validated against standard test cases with known classical solution and known experimental data. In the second part, we present and discuss two component, immiscible permeability data for rough and propped fracture obtained with our code for a rage of proppants

  20. Coarse-grained simulation of surface tension of perfiuorocarbons%粗粒化尺度模拟全氟烷烃的界面张力

    Institute of Scientific and Technical Information of China (English)

    杜球; 杨晓宁

    2011-01-01

    通过分子动力学模拟方法,采用构建的粗粒化模型,对全氟烷烃(C6F14和C9F20)的界面性质进行了模拟计算.模拟得到的体系界面密度分布能清楚地反映界面结构及分子分布情况.通过与不同温度下实验值进行了比较,模拟的界面张力与实验数据十分吻合,并呈现随温度升高而减小的趋势.研究表明:所构建的粗粒化模型能够准确描述全氟烷烃的表面张力性质.%The interfacial tension properties of perfluorocarbons, including C6F14 and C9F20, were simulated by using a new coarse-grained model. The obtained interface density distribution clearly displayed the structure of gas-liquid interface. The simulated surface tensions of perfluorocarbons were compared with the corresponding experimental data. Results showed that the simulated surface tensions agreed well with the experimental data. The surface tensions showed a decreasing trend with the temperature increasing. It was demonstrated that the proposed coarse-grained model could be used for further simulation.

  1. Three-gradient regular solution model for simple liquids wetting complex surface topologies

    Directory of Open Access Journals (Sweden)

    Sabine Akerboom

    2016-10-01

    Full Text Available We use regular solution theory and implement a three-gradient model for a liquid/vapour system in contact with a complex surface topology to study the shape of a liquid drop in advancing and receding wetting scenarios. More specifically, we study droplets on an inverse opal: spherical cavities in a hexagonal pattern. In line with experimental data, we find that the surface may switch from hydrophilic (contact angle on a smooth surface θY 90°. Both the Wenzel wetting state, that is cavities under the liquid are filled, as well as the Cassie–Baxter wetting state, that is air entrapment in the cavities under the liquid, were observed using our approach, without a discontinuity in the water front shape or in the water advancing contact angle θ. Therefore, air entrapment cannot be the main reason why the contact angle θ for an advancing water front varies. Rather, the contact line is pinned and curved due to the surface structures, inducing curvature perpendicular to the plane in which the contact angle θ is observed, and the contact line does not move in a continuous way, but via depinning transitions. The pinning is not limited to kinks in the surface with angles θkink smaller than the angle θY. Even for θkink > θY, contact line pinning is found. Therefore, the full 3D-structure of the inverse opal, rather than a simple parameter such as the wetting state or θkink, determines the final observed contact angle.

  2. Short-Range Wetting at Liquid Gallium-Bismuth Alloy Surfaces: X-Ray Measurements and Square-Gradient Theory

    OpenAIRE

    Huber, Patrick; Shpyrko, Oleg; Pershan, Peter S.; Ocko, Ben; DiMasi, Elaine; Deutsch, Moshe

    2003-01-01

    We present an x-ray reflectivity study of wetting at the free surface of the binary liquid metal alloy gallium-bismuth (Ga-Bi) in the region where the bulk phase separates into Bi-rich and Ga-rich liquid phases. The measurements reveal the evolution of the microscopic structure of the wetting films of the Bi-rich, low-surface-tension phase along several paths in the bulk phase diagram. The wetting of the Ga-rich bulk’s surface by a Bi-rich wetting film, the thickness of which is limited by gr...

  3. Effects of elasticity and surface tension on the spreading dynamics of a thin film under the influence of intermolecular forces

    Science.gov (United States)

    Young, Yuan-Nan; Stone, Howard

    2016-11-01

    The spreading dynamics of a thin layer of viscous Newtonian fluid between an elastic sheet and a wetting solid substrate is examined using the lubrication theory. On the wetting substrate an ultra thin film (precursor film) develops as a result of the intermolecular force between the fluid and the wetting solid substrate. Such a precursor film prevents the stress singularity associated with a moving contact line. Following the methodology by, the effects of elasticity on the macroscopic contact line structure in the quasistatic limit are elucidated by an ordinary differential equation derived from an analysis of the energy and its dissipation. Similar to the case of a regular fluid interface with surface tension (capillary spreading), the elasto-capillary thin film profile also consists of a core at the center, an ultra thin film in the far field, and a contact line region where the core film profile connects smoothly to the precursor film. For capillary spreading, the precursor film transitions monotonically to the core film. Due to the interfacial elasticity, a spatial oscillation of film height in the contact line region is found. In addition, it is found that elasticity causes the sliding motion of the thin film: the contact angle close to zero as

  4. Surface-tension-driven convection in pure liquid layers evaporating into ambient air: influence of liquid volatility

    Science.gov (United States)

    Chauvet, Fabien; Dehaeck, Sam; Colinet, Pierre

    2011-11-01

    The spontaneous surface-tension-driven convective patterns induced by evaporation of a pure liquid layer are studied experimentally. A volatile liquid layer placed in a cylindrical container is left free to evaporate into air at rest under ambient conditions. The thermal dynamics of the evaporating liquid layer is visualized using an infrared camera. Evaporation rate and liquid thickness are measured by weighting. We focus on the transition between the convective state and the conductive state appearing at a certain instant during the drying of the liquid layer. The critical Marangoni number Mac associated to this transition is estimated from evaporation rate and layer thickness measurements at this instant. The effect of the evaporation rate on Mac and kc (the critical wavenumber) has been investigated by changing the container height and, separately, the effect of the liquid volatility has been studied by using different liquids. Interestingly, it appears that Mac does not depend on the evaporation rate while it depends strongly on the liquid volatility. Given the typical uncertainties associated with liquid properties, a quite reasonable agreement is found with a ``one-sided'' linear stability analysis of this problem. Supported by ESA & BELSPO, by the EU, by ULB, and by FRS - FNRS.

  5. Copper foils with gradient structure in thickness direction and diff erent roughnesses on two surfaces fabricated by double rolling

    Institute of Scientific and Technical Information of China (English)

    Xi-yong Wang; Xue-feng Liu; Wen-jiang Zou; Jian-xin Xie

    2013-01-01

    Copper foils with gradient structure in thickness direction and diff erent roughnesses on two surfaces were fabricated by double rolling. The two surface morphologies of double-rolled copper foils are quite diff erent, and the surface roughness values are 61 and 1095 nm, respectively. The roughness value of matt surface can meet the requirement for bonding the resin matrix with copper foils used for flexible printed circuit boards, thus may omit traditional roughening treatment;the microstructure of double-rolled copper foils demonstrates an obviously asymmetric gradient feature. From bright surface to matt surface in thickness direction, the average grain size first increases from 2.3 to 7.4 µm and then decreases to 3.6 µm; compared with conventional rolled copper foils, the double-rolled copper foils exhibit a remarkably increased bending fatigue life, and the increased range is about 16.2%.

  6. Application of Three-Dimensionally Printed Probe and Reservoir to Critical Micelle Concentration Determination by Microvolume Surface Tension Measurement.

    Science.gov (United States)

    Horiuchi, Shohei; Choda, Naoki; Takahashi, Haruyuki; Sato, Tomomi; Taira, Hikaru; Mukai, Kei

    2016-08-01

    It is important to determine a critical micelle concentration (CMC) of a surfactant in a protein formulation for stabilizing the protein at maximum by preventing it from interfacial denaturation. There are several techniques for CMC determination. Among them, surface tensiometry is the most common approach because this has a long history and much data at many research fields. However, large amount of sample solution is usually required for the measurement (e.g., more than 1 mL is necessary when a standard reservoir like a glass petri dish is used). This is one of the hurdles for protein formulators because only a small amount of protein could be used at the early-stage development. In this research, we tried to minimize the required amount of sample solution for surface tension measurement by developing appropriate probe and reservoir using a three-dimensional printer (3D printer). The advantages and capabilities of 3D printer are (1) to control the shape and size of the printed material precisely, (2) to change the figure freely, and (3) to prepare the prototype quickly. After the experiments and thereby the refinement of probe as well as reservoir, we found that CMCs of polysorbate 20, polysorbate 80, and poloxamer 188 in water and protein formulations could be precisely detected using a probe 0.5 mm in diameter and small reservoir with a pocket of 7.5 mm in diameter/0.25 mm in depth which were made by a 3D printer. Furthermore, the required sample solution per each measurement could be reduced to 80 μL, which means more than 90% reduction against a standard reservoir.

  7. Multifactor analysis and simulation of the surface runoff and soil infiltration at different slope gradients

    Science.gov (United States)

    Huang, J.; Kang, Q.; Yang, J. X.; Jin, P. W.

    2017-08-01

    The surface runoff and soil infiltration exert significant influence on soil erosion. The effects of slope gradient/length (SG/SL), individual rainfall amount/intensity (IRA/IRI), vegetation cover (VC) and antecedent soil moisture (ASM) on the runoff depth (RD) and soil infiltration (INF) were evaluated in a series of natural rainfall experiments in the South of China. RD is found to correlate positively with IRA, IRI, and ASM factors and negatively with SG and VC. RD decreased followed by its increase with SG and ASM, it increased with a further decrease with SL, exhibited a linear growth with IRA and IRI, and exponential drop with VC. Meanwhile, INF exhibits a positive correlation with SL, IRA and IRI and VC, and a negative one with SG and ASM. INF was going up and then down with SG, linearly rising with SL, IRA and IRI, increasing by a logit function with VC, and linearly falling with ASM. The VC level above 60% can effectively lower the surface runoff and significantly enhance soil infiltration. Two RD and INF prediction models, accounting for the above six factors, were constructed using the multiple nonlinear regression method. The verification of those models disclosed a high Nash-Sutcliffe coefficient and low root-mean-square error, demonstrating good predictability of both models.

  8. Theory of activated glassy relaxation, mobility gradients, surface diffusion, and vitrification in free standing thin films.

    Science.gov (United States)

    Mirigian, Stephen; Schweizer, Kenneth S

    2015-12-28

    We have constructed a quantitative, force level, statistical mechanical theory for how confinement in free standing thin films introduces a spatial mobility gradient of the alpha relaxation time as a function of temperature, film thickness, and location in the film. The crucial idea is that relaxation speeds up due to the reduction of both near-surface barriers associated with the loss of neighbors in the local cage and the spatial cutoff and dynamical softening near the vapor interface of the spatially longer range collective elasticity cost for large amplitude hopping. These two effects are fundamentally coupled. Quantitative predictions are made for how an apparent glass temperature depends on the film thickness and experimental probe technique, the emergence of a two-step decay and mobile layers in time domain measurements, signatures of confinement in frequency-domain dielectric loss experiments, the dependence of film-averaged relaxation times and dynamic fragility on temperature and film thickness, surface diffusion, and the relationship between kinetic experiments and pseudo-thermodynamic measurements such as ellipsometry.

  9. The doubled CO2 climate - Impact of the sea surface temperature gradient

    Science.gov (United States)

    Rind, David

    1987-01-01

    The Goddard Institute for Space Studies (GISS) GCM of Hansen et al. (1983) was run, with 4 deg x 5 deg resolution, with doubled CO2 and two sets of sea surface temperature gradient distributions. One set was derived from the equilibrium doubled CO2 run of the 8 deg x 10 deg GISS GCM, with minimal high latitude amplification. The other set resembled closely the GFDL model results, with greater amplification. Both experiments had the same global mean surface air temperature change. The two experiments were often found to produce substantially different climate characteristics. With reduced high latitude amplification (set one), and thus, more equatorial warming, there was a greater increase in specific humidity and the greenhouse capacity of the atmosphere, resulting in a warmer atmosphere in general. Features such as the low-latitude precipitation, Hadley cell intensity, jet stream magnitude, and atmospheric energy transports all increased in comparison with the control run. In contrast, these features all decreased in the experiment with greater high latitude amplification (set two).

  10. Surface Tension of Molten Nickel-Tungsten Alloy%熔融Ni-W合金的表面张力研究

    Institute of Scientific and Technical Information of China (English)

    肖锋; 刘兰霄; 杨仁辉; 傅亚; 方亮; 赵红凯

    2008-01-01

    Surface tension of molten Ni-(5~10)W (mass fraction,%)alloys was measured at the temperature range of 1773~1873 K using an improved sessile drop method with an alumina substrate in an Ar+3%H2 atmosphere.The surface tension of molten Ni-W alloys decreases with increasing of temperature.On the basis of experimental data,the surface tension of molten Ni-W alloys was also theoretically deduced both as functions of concentration and temperature using a model of Butler's equation.The surface segregation in Ni-W system was calculated.The measured results agree well with a model for the surface tension.The surface concentration oftungsten is lower than that in bulk.%采用改进静滴法测定了1773~1873 K温度范围内熔融Ni-(5~10)W(质量分数,%)合金在Al2O3基板上于Ar+3%H2气氛下的表面张力数据.熔融Ni-W合金的表面张力随着温度的升高而降低.在此基础上采用Butler模型推导了表面张力随温度与浓度的变化情况,计算了合金体系中元素的偏聚情况.表面张力的计算结果与测量值的符合度较高.W在合金表面的浓度低于体相浓度.

  11. Molecular Dynamics Simulation of Wrinkles in Zigzag Graphene Under Gradient Tension%梯度拉伸下锯齿型石墨烯褶皱的分子动力学模拟

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    针对梯度拉伸荷载作用下正方形锯齿型石墨烯薄膜的褶皱变形进行了分子动力学模拟。研究了石墨烯表面形成褶皱的发展、演化过程,揭示了边界条件和荷载条件对石墨烯褶皱变形的重要影响,得到了褶皱波幅、波长、离面位移和褶皱方向角等随加载位移的变化规律,研究了石墨烯尺寸、温度和荷载梯度对石墨烯褶皱变形的影响。结果表明:褶皱的发展、演化过程可分为褶皱前期、中期、后期、末期4个阶段;随着加载位移增加,褶皱幅值、幅值波长比和最大离面位移逐渐增大,褶皱波长和方向角则减小;尺寸和温度对石墨烯褶皱都会产生重要影响,而荷载梯度对石墨烯褶皱影响甚微。%This paper deals with molecular dynamics simulation of the wrinkling deformation of a zigzag square sin -gle-layer graphene sheet ( SLGS) subjected to gradient tensions .In the investigation , the formation and evolution of the wrinkles on graphene surface are analyzed , and the effects of boundary and loading conditions on the wrink-ling deformation are explored.Then, the variations of the wrinkling amplitude , the wavelength, the out-of-plane displacement and the direction angle with the loading displacement are revealed , and the effects of graphene size , temperature and loading grad on the wrinkling are discussed .It is found that ( 1 ) the formation and evolution process of wrinkles can be divided into four stages , namely the prophase stage , the metaphase stage , the ana-phase stage and the telophase stage; (2) with the increase in loading displacement , the wrinkling amplitude , the ratio of amplitude to wavelength and the maximum out-of-plane displacement all increase , while the wrinkling wavelength and the direction angle decrease; and (3) both the size and the temperature remarkably affect the gra-phene wrinkling , while the loading grad has little effect on the wrinkling .

  12. 修正表面张力算法的SPH方法及其实现%Smoothed Particle Hydrodynamics Method with Modified Surface Tension and Its Implementation

    Institute of Scientific and Technical Information of China (English)

    强洪夫; 陈福振; 高巍然

    2011-01-01

    Modified equations for surface tension are derived by modifying normal and curvature with corrected smoothed particle method (CSPM). It is based on smoothed particle hydrodynamics (SPH) method with surface tension proposed by Morris. Both Morris and our method are tested via a semicircular problem. Factors that affect accuracy are investigated including surface definition, normal and curvature calculation. Smoothed length in curvature calculation is also confirmed reasonable. Furthermore, formation of a liquid drop with initial square shape under surface tension is simulated. Compared with Morris method and grid-based volume of fluid method,it is proved that the accuracy of our method is higher and particle distribution is more homogeneous. Finally, coalescence process of two oil drops in water under surface tension is simulated.%在Morris提出的表面张力SPH方法基础上,通过引入CSPM方法对边界法向的计算和曲率的计算进行修正,得到表面张力修正方程组;通过半圆形算例测试方法和Morris方法在边界定位、法向计算和曲率计算等影响表面张力关键因素的求解精度,研究曲率计算中应采用的光滑长度值.模拟初始方形液滴在表面张力作用下的自然变化过程,并与Morris方法及VOF有限体积法进行对比,表明方法精度较高,稳定性较好.最后,模拟水溶液中两个油滴的互溶过程.

  13. Carboxymethylated lignins with low surface tension toward low viscosity and highly stable emulsions of crude bitumen and refined oils.

    Science.gov (United States)

    Li, Shuai; Ogunkoya, Dolanimi; Fang, Tiegang; Willoughby, Julie; Rojas, Orlando J

    2016-11-15

    Kraft and organosolv lignins were subjected to carboxymethylation to produce fractions that were soluble in water, displayed a minimum surface tension as low as 34mN/m (25°C) and a critical aggregation concentration of ∼1.5wt%. The carboxymethylated lignins (CML), which were characterized in terms of their degree of substitution ((31)P NMR), elemental composition, and molecular weight (GPC), were found suitable in the formulation of emulsions with bitumens of ultra-high viscosity, such as those from the Canadian oil sands. Remarkably, the interfacial features of the CML enabled fuel emulsions that were synthesized in a very broad range of internal phase content (30-70%). Cryo-replica transmission electron microscopy, which was used here the first time to assess the morphology of the lignin-based emulsions, revealed the droplets of the emulsion stabilized with the modified lignin. The observed drop size (diametersoperations for power generation, which also take advantage of the high heating value of the emulsion components. The ability of CML to stabilize emulsions and to contribute in their combustion was tested with light fuels (kerosene, diesel, and jet fuel) after formulation of high internal phase systems (70% oil) that enabled operation of a fuel engine. A significant finding is that under certain conditions and compared to the respective pure fuel, combustion of the O/W emulsions stabilized by CML presented lower NOx and CO emissions and maintained a relatively high combustion efficiency. The results highlight the possibilities in high volume application for lignin biomacromolecules.

  14. Sea surface density gradients in the Nordic Seas during the Holocene as revealed by paired microfossil and isotope proxies

    DEFF Research Database (Denmark)

    Van Nieuwenhove, Nicolas; Hillaire-Marcel, Claude; Bauch, Henning A.

    2016-01-01

    We attempt to assess the Holocene surface-subsurface seawater density gradient on millennial time-scale based on the reconstruction of potential density (σθ) by combining data from dinoflagellate cyst assemblages and planktic foraminiferal (Neogloboquadrina pachyderma (s)) stable oxygen isotopes (δ...

  15. Evaporative gold nanorod assembly on chemically stripe-patterned gradient surfaces.

    Science.gov (United States)

    Ahmad, Imtiaz; Jansen, H Patrick; van Swigchem, Jeroen; Ganser, Christian; Teichert, Christian; Zandvliet, Harold J W; Kooij, E Stefan

    2015-07-01

    Experimentally we explore the potential of using pre-defined motion of a receding contact line to control the deposition of nanoparticles from suspension. Stripe-patterned wettability gradients are employed, which consist of alternating hydrophilic and hydrophobic stripes with increasing macroscopic surface energy. Nanoparticle suspensions containing nanorods and nanospheres are deposited onto these substrates and left to dry. After moving over the pattern and evaporation of the solvent, characteristic nanoparticle deposits are found. The liquid dynamics has a pronounced effect on the spatial distribution. Nanoparticles do not deposit on the hydrophobic regions; there is high preference to deposit on the wetting stripes. Moreover, the fact that distributed nanoparticle islands are formed suggests that the receding of the contact line occurs in a stick-slip like fashion. Furthermore, the formation of liquid bridges covering multiple stripes during motion of the droplet over the patterns is modeled. We discuss their origin and show that the residue after drying, containing both nanoparticles and the stabilizing surfactant, also resembles such dynamics. Finally, zooming into individual islands reveals that highly selective phase separation occurs based on size and shape of the nanoparticles.

  16. Surface profile gradient in amorphous Ta2O5 semi conductive layers regulates nanoscale electric current stability

    Science.gov (United States)

    Cefalas, A. C.; Kollia, Z.; Spyropoulos-Antonakakis, N.; Gavriil, V.; Christofilos, D.; Kourouklis, G.; Semashko, V. V.; Pavlov, V.; Sarantopoulou, E.

    2017-02-01

    A link between the morphological characteristics and the electric properties of amorphous layers is established by means of atomic, conductive, electrostatic force and thermal scanning microscopy. Using amorphous Ta2O5 (a-Ta2O5) semiconductive layer, it is found that surface profile gradients (morphological gradient), are highly correlated to both the electron energy gradient of trapped electrons in interactive Coulombic sites and the thermal gradient along conductive paths and thus thermal and electric properties are correlated with surface morphology at the nanoscale. Furthermore, morphological and electron energy gradients along opposite conductive paths of electrons intrinsically impose a current stability anisotropy. For either long conductive paths (L > 1 μm) or along symmetric nanodomains, current stability for both positive and negative currents i is demonstrated. On the contrary, for short conductive paths along non-symmetric nanodomains, the set of independent variables (L, i) is spanned by two current stability/intability loci. One locus specifies a stable state for negative currents, while the other locus also describes a stable state for positive currents.

  17. Population dynamics of two antilisterial cheese surface consortia revealed by temporal temperature gradient gel electrophoresis

    Directory of Open Access Journals (Sweden)

    Hasler Madlen

    2010-03-01

    Full Text Available Abstract Background Surface contamination of smear cheese by Listeria spp. is of major concern for the industry. Complex smear ecosystems have been shown to harbor antilisterial potential but the microorganisms and mechanisms involved in the inhibition mostly remain unclear, and are likely related to complex interactions than to production of single antimicrobial compounds. Bacterial biodiversity and population dynamics of complex smear ecosystems exhibiting antilisterial properties in situ were investigated by Temporal temperature gradient gel electrophoresis (TTGE, a culture independent technique, for two microbial consortia isolated from commercial Raclette type cheeses inoculated with defined commercial ripening cultures (F or produced with an old-young smearing process (M. Results TTGE revealed nine bacterial species common to both F and M consortia, but consortium F exhibited a higher diversity than consortium M, with thirteen and ten species, respectively. Population dynamics were studied after application of the consortia on fresh-produced Raclette cheeses. TTGE analyses revealed a similar sequential development of the nine species common to both consortia. Beside common cheese surface bacteria (Staphylococcus equorum, Corynebacterium spp., Brevibacterium linens, Microbacterium gubbeenense, Agrococcus casei, the two consortia contained marine lactic acid bacteria (Alkalibacterium kapii, Marinilactibacillus psychrotolerans that developed early in ripening (day 14 to 20, shortly after the growth of staphylococci (day 7. A decrease of Listeria counts was observed on cheese surface inoculated at day 7 with 0.1-1 × 102 CFU cm-2, when cheeses were smeared with consortium F or M. Listeria counts went below the detection limit of the method between day 14 and 28 and no subsequent regrowth was detected over 60 to 80 ripening days. In contrast, Listeria grew to high counts (105 CFU cm-2 on cheeses smeared with a defined surface culture

  18. Response surface methodology to optimize gradient ion chromatographic separation of inorganic anions and organic acids in tobacco leaves

    Institute of Scientific and Technical Information of China (English)

    Rui Qi Wang; Na Ni Wang; Jia Jie Zhang; Yan Zhu

    2011-01-01

    The separation optimization of nine organic and inorganic anions in tobacco leaves using gradient ion chromatography by response surface methodology was investigated. In order to achieve this goal the usefulness of the chromatographic response function (CRF) for the evaluation of the two different chromatographic performance goals (resolution and analysis time) was tested. The experiments were performed according to a Box-Behnken design response surface experimental design.

  19. Nanomechanical properties of lipid bilayer: Asymmetric modulation of lateral pressure and surface tension due to protein insertion in one leaflet of a bilayer

    Science.gov (United States)

    Maftouni, Negin; Amininasab, Mehriar; Ejtehadi, Mohammad Reza; Kowsari, Farshad; Dastvan, Reza

    2013-02-01

    The lipid membranes of living cells form an integral part of biological systems, and the mechanical properties of these membranes play an important role in biophysical investigations. One interesting problem to be evaluated is the effect of protein insertion in one leaflet of a bilayer on the physical properties of lipid membrane. In the present study, an all atom (fine-grained) molecular dynamics simulation is used to investigate the binding of cytotoxin A3 (CTX A3), a cytotoxin from snake venom, to a phosphatidylcholine lipid bilayer. Then, a 5-microsecond coarse-grained molecular dynamics simulation is carried out to compute the pressure tensor, lateral pressure, surface tension, and first moment of lateral pressure in each monolayer. Our simulations reveal that the insertion of CTX A3 into one monolayer results in an asymmetrical change in the lateral pressure and corresponding spatial distribution of surface tension of the individual bilayer leaflets. The relative variation in the surface tension of the two monolayers as a result of a change in the contribution of the various intermolecular forces may potentially be expressed morphologically.

  20. Densities, viscosities, refractive indices, and surface tensions for binary and ternary mixtures of 2-propanol, tetrahydropyran, and 2,2,4-trimethylpentane

    Energy Technology Data Exchange (ETDEWEB)

    Kao, Y.-C. [Department of Applied Chemistry, Providence University, Shalu 43301, Taiwan (China); Tu, C.-H., E-mail: chtu@pu.edu.t [Department of Applied Chemistry, Providence University, Shalu 43301, Taiwan (China)

    2011-02-15

    Densities, viscosities, refractive indices, and surface tensions of the ternary system (2-propanol + tetrahydropyran + 2,2,4-trimethylpentane) at T = 303.15 K and its constituent binary systems (2-propanol + tetrahydropyran, 2-propanol + 2,2,4-trimethylpentane, and tetrahydropyran + 2,2,4-trimethylpentane) at T = (293.15, 303.15, 313.15, and 323.15) K were measured at atmospheric pressure. Densities were determined using a vibrating-tube densimeter. Viscosities were measured with an automatic microviscometer based on the rolling-ball principle. Refractive indexes were measured using a digital Abbe-type refractometer. Surface tensions were determined by the Wilhelmy-plate method. From these data, excess molar volumes, deviations in viscosity, deviations in refractive index, and deviations in surface tension were calculated. The results for the binary and ternary systems were fitted to the Redlich-Kister equation and the variable-degree polynomials in terms of compositions, respectively. The experimental and calculated quantities are used to study the nature of mixing behaviour between mixture components.