WorldWideScience

Sample records for surface soil property

  1. Surface Chemical Properties of Colloids in Main Soils of China

    Institute of Scientific and Technical Information of China (English)

    MAYI-JIE; YUANCHAO-LIANG

    1991-01-01

    Surface chemical properties of soil colloids are the important factor affecting soil fertility and genesis.To provide scientific basis for soil genetic classification,promotion of soil fertility and reasonable fertilizqation,the specific surface area and electric charge of soil colloids in relation to clay minerals and organic matter are further discussed on the basis of the results obtained from the studies on surface chemical properties of soil colloids in five main soils of China.Results from the studies show that the effect of clay minerals and organic matter on the surface chemical properties of soil colloids is very complicated because the siloxane surface,hydrated oxide surface and organic matter surface do not exist separately,but they are always mixed together and influenced each other.The understanding of the relationship among clay minerals,organic matter and surface chemical properties of soil colloids depends upon further study of the relevant disciplines of soil science,especially the study on the mechanisms of organo-mineral complexes.

  2. Corn Stover Impacts on Near-Surface Soil Properties of No-Till Corn In Ohio

    Energy Technology Data Exchange (ETDEWEB)

    Blanco-Canqui, H; Lal, Rattan; Post, W M.; Izaurralde, R Cesar C.; Owens, L B.

    2006-01-06

    Corn stover is a primary biofuel feedstock and its expanded use could help reduce reliance on fossil fuels and net CO2 emissions. Excessive stover removal may, however, negatively impact near-surface soil properties within a short period after removal. We assessed changes in soil crust strength, bulk density, and water content over a 1-yr period following a systematic removal or addition of stover from three no-till soils under corn in Ohio.

  3. The influence of surface reflectance anisotropy on estimation of soil properties

    Science.gov (United States)

    Bartholomeus, Harm; Roosjen, Peter; Clevers, Jan

    2014-05-01

    The spatial variation in soil properties is an important factor for agricultural management. Unmanned airborne vehicles (UAV's) equipped with a hyperspectral mapping system may provide these data, but anisotropic reflectance effects may have an influence on the derived soil properties. Besides influencing the reflectance, angular observations may deliver added information about soil properties. We investigated the anisotropic behavior of 59 soil samples with a large variation in soil composition, by measuring their reflectance (350-2500 nm) over 92 different angles using a robot-based laboratory goniometer system. The results show that the anisotropic behavior of the soils influences the measured reflectance significantly, which limits the accurate prediction of soil properties (OM and clay especially). However, prediction accuracies of OM increase when spectra are measured under specific angles. Prediction accuracies further increase when a combination of observation angles is being used. Apart from that, using UAV's the wavelength range is limited to about 1000 nm. In general, this will decrease the model performance, but our results show that this effect can largely be compensated by combining multiple observation angles. Altogether, we demonstrate that surface anisotropy influences the prediction of soil properties negatively. This effect can be reduced by combining spectra acquired under different angles. Moreover, predictions can be improved if combinations of different observation angles are used.

  4. Spatial and temporal distribution of cyanobacterial soil crusts in the Kalahari: Implications for soil surface properties

    Science.gov (United States)

    Thomas, A. D.; Dougill, A. J.

    2007-03-01

    Localised patterns of erosion and deposition in vegetated semi-arid rangelands have been shown to influence ecological change and biogeochemical cycles. In the flat, vegetated Kalahari rangelands of Southern Africa the factors regulating erodibility of the fine sand soils and the erosivity of wind regimes require further investigation. This paper reports on the spatial and temporal patterns of cyanobacterial soil crust cover from ten sites at five sampling locations in the semi-arid Kalahari and discusses the likely impact on factors regulating surface erodibility and erosivity. Cyanobacterial soil crust cover on Kalahari Sand varied between 11% and 95% of the ground surface and was higher than previously reported. Cover was inversely related to grazing with the lowest crust cover found close to boreholes and the highest in the Game Reserve and Wildlife Management Zone. In grazed areas, crusts form under the protective canopies of the thorny shrub Acacia mellifera. Fenced plot data showed that crusts recover quickly from disturbance, with a near complete surface crust cover forming within 15 months of disturbance. Crust development is restricted by burial by wind blown sediment and by raindrop impact. Crusts had significantly greater organic matter and total nitrogen compared to unconsolidated surfaces. Crusts also significantly increased the compressive strength of the surface (and thus decreased erodibility) and changed the surface roughness. Establishing exactly how these changes affect aeolian erosion requires further process-based studies. The proportion of shear velocity acting on the surface in this complex mixed bush-grass-crust environment will be the key to understanding how crusts affect erodibility.

  5. Patterns and scaling properties of surface soil moisture in an agricultural landscape: An ecohydrological modeling study

    Science.gov (United States)

    Korres, W.; Reichenau, T. G.; Schneider, K.

    2013-08-01

    Soil moisture is a key variable in hydrology, meteorology and agriculture. Soil moisture, and surface soil moisture in particular, is highly variable in space and time. Its spatial and temporal patterns in agricultural landscapes are affected by multiple natural (precipitation, soil, topography, etc.) and agro-economic (soil management, fertilization, etc.) factors, making it difficult to identify unequivocal cause and effect relationships between soil moisture and its driving variables. The goal of this study is to characterize and analyze the spatial and temporal patterns of surface soil moisture (top 20 cm) in an intensively used agricultural landscape (1100 km2 northern part of the Rur catchment, Western Germany) and to determine the dominant factors and underlying processes controlling these patterns. A second goal is to analyze the scaling behavior of surface soil moisture patterns in order to investigate how spatial scale affects spatial patterns. To achieve these goals, a dynamically coupled, process-based and spatially distributed ecohydrological model was used to analyze the key processes as well as their interactions and feedbacks. The model was validated for two growing seasons for the three main crops in the investigation area: Winter wheat, sugar beet, and maize. This yielded RMSE values for surface soil moisture between 1.8 and 7.8 vol.% and average RMSE values for all three crops of 0.27 kg m-2 for total aboveground biomass and 0.93 for green LAI. Large deviations of measured and modeled soil moisture can be explained by a change of the infiltration properties towards the end of the growing season, especially in maize fields. The validated model was used to generate daily surface soil moisture maps, serving as a basis for an autocorrelation analysis of spatial patterns and scale. Outside of the growing season, surface soil moisture patterns at all spatial scales depend mainly upon soil properties. Within the main growing season, larger scale

  6. Bacteria-mineral interactions in soil and their effect on particle surface properties

    Science.gov (United States)

    Miltner, Anja; Achtenhagen, Jan; Goebel, Marc-Oliver; Bachmann, Jörg; Kästner, Matthias

    2015-04-01

    Interactions between bacteria or their residues and mineral surfaces play an important role for soil processes and properties. It is well known that bacteria tend to grow attached to surfaces and that they get more hydrophobic when grown under stress conditions. In addition, bacterial and fungal biomass residues have recently been shown to contribute to soil organic matter formation. The attachment of bacteria or their residues to soil minerals can be expected to modify the surface properties of these particles, in particular the wettability. We hypothesize that the extent of the effect depends on the surface properties of the bacteria, which change depending on environmental conditions. As the wettability of soil particles is crucial for the distribution and the availability of water, we investigated the effect of both living cells and bacterial residues (cell envelope fragments and cytosol) on the wettability of model mineral particles in a simplified laboratory system. We grew Pseudomonas putida cells in mineral medium either without (unstressed) or with additional 1.5 M NaCl (osmotically stressed). After 2 h of incubation, the cells were disintegrated by ultrasonic treatment. Different amounts of either intact cells, cell envelope fragments or cytosol (each corresponding to 108, 109, or 1010 cells per gram of mineral) were mixed with quartz sand, quartz silt or kaolinite. The bacteria-mineral associations were air-dried for 2 hours and analyzed for their contact angle. We found that the surfaces of osmotically stressed cells were more hydrophobic than the surfaces of unstressed cells and that the bacteria-mineral associations had higher contact angles than the pure minerals. A rather low surface coverage (~10%) of the mineral surfaces by bacteria was sufficient to increase the contact angle significantly, and the different wettabilities of stressed and unstressed cells were reflected in the contact angles of the bacteria-mineral associations. The increases in

  7. A Comparison of Land Surface Model Soil Hydraulic Properties Estimated by Inverse Modeling and Pedotransfer Functions

    Science.gov (United States)

    Gutmann, Ethan D.; Small, Eric E.

    2007-01-01

    Soil hydraulic properties (SHPs) regulate the movement of water in the soil. This in turn plays an important role in the water and energy cycles at the land surface. At present, SHPS are commonly defined by a simple pedotransfer function from soil texture class, but SHPs vary more within a texture class than between classes. To examine the impact of using soil texture class to predict SHPS, we run the Noah land surface model for a wide variety of measured SHPs. We find that across a range of vegetation cover (5 - 80% cover) and climates (250 - 900 mm mean annual precipitation), soil texture class only explains 5% of the variance expected from the real distribution of SHPs. We then show that modifying SHPs can drastically improve model performance. We compare two methods of estimating SHPs: (1) inverse method, and (2) soil texture class. Compared to texture class, inverse modeling reduces errors between measured and modeled latent heat flux from 88 to 28 w/m(exp 2). Additionally we find that with increasing vegetation cover the importance of SHPs decreases and that the van Genuchten m parameter becomes less important, while the saturated conductivity becomes more important.

  8. Predicting root zone soil moisture with soil properties and satellite near-surface moisture data across the conterminous United States

    Science.gov (United States)

    Baldwin, D.; Manfreda, S.; Keller, K.; Smithwick, E. A. H.

    2017-03-01

    Satellite-based near-surface (0-2 cm) soil moisture estimates have global coverage, but do not capture variations of soil moisture in the root zone (up to 100 cm depth) and may be biased with respect to ground-based soil moisture measurements. Here, we present an ensemble Kalman filter (EnKF) hydrologic data assimilation system that predicts bias in satellite soil moisture data to support the physically based Soil Moisture Analytical Relationship (SMAR) infiltration model, which estimates root zone soil moisture with satellite soil moisture data. The SMAR-EnKF model estimates a regional-scale bias parameter using available in situ data. The regional bias parameter is added to satellite soil moisture retrievals before their use in the SMAR model, and the bias parameter is updated continuously over time with the EnKF algorithm. In this study, the SMAR-EnKF assimilates in situ soil moisture at 43 Soil Climate Analysis Network (SCAN) monitoring locations across the conterminous U.S. Multivariate regression models are developed to estimate SMAR parameters using soil physical properties and the moderate resolution imaging spectroradiometer (MODIS) evapotranspiration data product as covariates. SMAR-EnKF root zone soil moisture predictions are in relatively close agreement with in situ observations when using optimal model parameters, with root mean square errors averaging 0.051 [cm3 cm-3] (standard error, s.e. = 0.005). The average root mean square error associated with a 20-fold cross-validation analysis with permuted SMAR parameter regression models increases moderately (0.082 [cm3 cm-3], s.e. = 0.004). The expected regional-scale satellite correction bias is negative in four out of six ecoregions studied (mean = -0.12 [-], s.e. = 0.002), excluding the Great Plains and Eastern Temperate Forests (0.053 [-], s.e. = 0.001). With its capability of estimating regional-scale satellite bias, the SMAR-EnKF system can predict root zone soil moisture over broad extents and has

  9. Bright patches on chernozems - from space to surface and soil properties

    Science.gov (United States)

    Smetanova, Anna; Burian, Libor; Holec, Juraj; Minár, Jozef

    2016-04-01

    The bright patches on chernozems can be easily visually distinguished in the aerial images, due to their bright colour contrasting with the dark colour of the surrounding chernozems. They present a typical feature of the loess hilly lands in the Danube Lowland. They reffer predominantely to the areas where (i) the soil substrate - loess is tilled, (ii) the transitional AC horizon of chernozems is tilled, (iii) or one of them, or both are mixed into the plough layer during tillage. They are usually categorized as eroded chernozems or regosols. To the lower extent, the accumulation patches might occur, if the loess material redeposited from upper part of the slope in the colluvium is tilled. This study focuses on uncovering the soil properties of bright patches, identified on different scales - spatial and temporal, combining three methods - the remote sensing, morphometric analysis and soil mapping. In the area of 31 km² (located in the Trnavska pahorkatina Hilly Land, south of Trnava), the bright patches were identified using visual analysis of georeferenced aerial images from 1949 and 2004, representing two types of landscape structure characteristic for the 20th Century. In 1949 small, in one direction elongated fields, with mean size 0.008 km2 prevailed, while in 2004 the mean size of a field was 0.28 km2. The morphometric analysis was performed based on DEM derived from topographical maps (scale 1:10 000). Soil sampling in the first phase of the project was performed in a subset of the patches in small agriculture catchment (0.28 km2), situated in one single field (in 2004). The percussion drilling or hand augering (with undisturbed structure) were used in order to describe the depth of the soil horizons and the soil properties. Together 365 bright patches covering 3.2% of the study area (31 km²) were identified in 1949; while it was twice more in 2004 (776 patches), when they covered approximately 12% of the same area. The bright patches were predominantly

  10. Soil Shear Properties Assessment, Resistance, Thermal, and Triboelectric Analysis (SPARTTA) Tool: A New Multitool Instrument for Identifying the Physical Properties of In-situ Soils on Planetary Surfaces.

    Science.gov (United States)

    Anderson, R. C.; Peters, G. H.; Beegle, L. W.; Zhou, Y. M.; Van Stryk, N.; Carey, E. M.

    2015-12-01

    SPARTTA is a low cost, low mass (robotic surface mission. A key innovation of SPARTTA is its state-of-the-art miniature packaging approach which enables in-situ comprehensive analyses of the physical properties of soils on any planetary body (e.g. asteroids, comets, etc.) with a single compact instrument. SPARTTA will specifically address several high-priority science goals identified in the Decadal Study regarding the physical properties of planetary soils, liquid water/water-ice detection, and electrostatics for bodies as diverse as comets, Trojan asteroids, Mars and the Moon [Planetary Science Decadal Study, 2013]. Additionally, it will provide valuable data to assist engineers in designing landing, drilling, coring, and sample acquisition systems for future Discovery, New Frontiers missions, or flagship landed missions.

  11. [Effects of different patterns surface mulching on soil properties and fruit trees growth and yield in an apple orchard].

    Science.gov (United States)

    Zhang, Yi; Xie, Yong-Sheng; Hao, Ming-De; She, Xiao-Yan

    2010-02-01

    Taking a nine-year-old Fuji apple orchard in Loess Plateau as test object, this paper studied the effects of different patterns surface mulching (clean tillage, grass cover, plastic film mulch, straw mulch, and gravel mulch) on the soil properties and fruit trees growth and yield in this orchard. Grass cover induced the lowest differentiation of soil moisture profile, while gravel mulch induced the highest one. In treatment gravel mulch, the soil moisture content in apple trees root zone was the highest, which meant that there was more water available to apple trees. Surface mulching had significant effects on soil temperature, and generally resulted in a decrease in the maximum soil temperature. The exception was treatment plastic film mulch, in which, the soil temperature in summer exceeded the maximum allowable temperature for continuous root growth and physiological function. With the exception of treatment plastic film mulch, surface mulching increased the soil CO2 flux, which was the highest in treatment grass cover. Surface mulching also affected the proportion of various branch types and fruit yield. The proportion of medium-sized branches and fruit yield were the highest in treatment gravel mulch, while the fruit yield was the lowest in treatment grass cover. Factor analysis indicated that among the test surface mulching patterns, gravel mulch was most suitable for the apple orchards in gully region of Loess Plateau.

  12. Integrated Processing of High Resolution Topographic Data for Soil Erosion Assessment Considering Data Acquisition Schemes and Surface Properties

    Science.gov (United States)

    Eltner, A.; Schneider, D.; Maas, H.-G.

    2016-06-01

    Soil erosion is a decisive earth surface process strongly influencing the fertility of arable land. Several options exist to detect soil erosion at the scale of large field plots (here 600 m²), which comprise different advantages and disadvantages depending on the applied method. In this study, the benefits of unmanned aerial vehicle (UAV) photogrammetry and terrestrial laser scanning (TLS) are exploited to quantify soil surface changes. Beforehand data combination, TLS data is co-registered to the DEMs generated with UAV photogrammetry. TLS data is used to detect global as well as local errors in the DEMs calculated from UAV images. Additionally, TLS data is considered for vegetation filtering. Complimentary, DEMs from UAV photogrammetry are utilised to detect systematic TLS errors and to further filter TLS point clouds in regard to unfavourable scan geometry (i.e. incidence angle and footprint) on gentle hillslopes. In addition, surface roughness is integrated as an important parameter to evaluate TLS point reliability because of the increasing footprints and thus area of signal reflection with increasing distance to the scanning device. The developed fusion tool allows for the estimation of reliable data points from each data source, considering the data acquisition geometry and surface properties, to finally merge both data sets into a single soil surface model. Data fusion is performed for three different field campaigns at a Mediterranean field plot. Successive DEM evaluation reveals continuous decrease of soil surface roughness, reappearance of former wheel tracks and local soil particle relocation patterns.

  13. Potential of the Thermal Infrared Wavelength Region to predict semi-arid Soil Surface Properties for Remote Sensing Monitoring

    Science.gov (United States)

    Eisele, Andreas; Chabrillat, Sabine; Lau, Ian; Hecker, Christoph; Hewson, Robert; Carter, Dan; Wheaton, Buddy; Ong, Cindy; Cudahy, Thomas John; Kaufmann, Hermann

    2014-05-01

    Digital soil mapping with the means of passive remote sensing basically relies on the soils' spectral characteristics and an appropriate atmospheric window, where electromagnetic radiation transmits without significant attenuation. Traditionally the atmospheric window in the solar-reflective wavelength region (visible, VIS: 0.4 - 0.7 μm; near infrared, NIR: 0.7 - 1.1 μm; shortwave infrared, SWIR: 1.1 - 2.5 μm) has been used to quantify soil surface properties. However, spectral characteristics of semi-arid soils, typically have a coarse quartz rich texture and iron coatings that can limit the prediction of soil surface properties. In this study we investigated the potential of the atmospheric window in the thermal wavelength region (long wave infrared, LWIR: 8 - 14 μm) to predict soil surface properties such as the grain size distribution (texture) and the organic carbon content (SOC) for coarse-textured soils from the Australian wheat belt region. This region suffers soil loss due to wind erosion processes and large scale monitoring techniques, such as remote sensing, is urgently required to observe the dynamic changes of such soil properties. The coarse textured sandy soils of the investigated area require methods, which can measure the special spectral response of the quartz dominated mineralogy with iron oxide enriched grain coatings. By comparison, the spectroscopy using the solar-reflective region has limitations to discriminate such arid soil mineralogy and associated coatings. Such monitoring is important for observing potential desertification trends associated with coarsening of topsoil texture and reduction in SOC. In this laboratory study we identified the relevant LWIR wavelengths to predict these soil surface properties. The results showed the ability of multivariate analyses methods (PLSR) to predict these soil properties from the soil's spectral signature, where the texture parameters (clay and sand content) could be predicted well in the models

  14. Potential of EnMAP spaceborne imaging spectroscopy for the prediction of common surface soil properties and expected accuracy

    Science.gov (United States)

    Chabrillat, Sabine; Foerster, Saskia; Steinberg, Andreas; Stevens, Antoine; Segl, Karl

    2016-04-01

    There is a renewed awareness of the finite nature of the world's soil resources, growing concern about soil security, and significant uncertainties about the carrying capacity of the planet. As a consequence, soil scientists are being challenged to provide regular assessments of soil conditions from local through to global scales. However, only a few countries have the necessary survey and monitoring programs to meet these new needs and existing global data sets are out-of-date. A particular issue is the clear demand for a new area-wide regional to global coverage with accurate, up-to-date, and spatially referenced soil information as expressed by the modeling scientific community, farmers and land users, and policy and decision makers. Soil spectroscopy from remote sensing observations based on studies from the laboratory scale to the airborne scale has been shown to be a proven method for the quantitative prediction of key soil surface properties in local areas for exposed soils in appropriate surface conditions such as low vegetation cover and low water content. With the upcoming launch of the next generation of hyperspectral satellite sensors in the next 3 to 5 years (EnMAP, HISUI, PRISMA, SHALOM), a great potential for the global mapping and monitoring of soil properties is appearing. Nevertheless, the capabilities to extend the soil properties current spectral modeling from local to regional scales are still to be demonstrated using robust methods. In particular, three central questions are at the forefront of research nowadays: a) methodological developments toward improved algorithms and operational tools for the extraction of soil properties, b) up scaling from the laboratory into space domain, and c) demonstration of the potential of upcoming satellite systems and expected accuracy of soil maps. In this study, airborne imaging spectroscopy data from several test sites are used to simulate EnMAP satellite images at 30 m scale. Then, different soil

  15. Effect of soil property on evaporation from bare soils

    Science.gov (United States)

    Zhang, Chenming; Li, Ling; Lockington, David

    2015-04-01

    Quantifying the actual evaporation rate from bare soils remains a challenging task as it not only associates with the atmospheric demand and liquid water saturation on the soil surface, but also the properties of the soils (e.g., porosity, pore size distribution). A physically based analytical model was developed to describe the surface resistance varying with the liquid water saturation near the soil surface. This model considers the soil pore size distribution, hydraulic connection between the main water cluster and capillary water in the soil surface when the soil surface is wet and the thickness of the dry soil layer when the soil surface is dry. The surface resistance model was then integrated to a numerical model based on water balance, heat balance and surface energy balance equations. The integrated model was validated by simulating water and heat transport processes during six soil column drying experiments. The analysis indicates that the when soil surface is wet, the consideration of pore size distribution in the surface resistance model offers better estimation of transient evaporation among different soil types than the estimations given by empirically based surface resistance models. Under fixed atmospheric boundary condition and liquid water saturation, fine sand has greater evaporation rate than coarse sand as stronger capillary force devlivers more water from the main water cluster. When the soil surface becomes dry, the impact of soil property to evaporation becomes trivial as the thickness of the dry soil layer turns to be the key factor to determine the evaporation rate.

  16. Evaluation of land surface model simulations of evapotranspiration over a 12 year crop succession: impact of the soil hydraulic properties

    Directory of Open Access Journals (Sweden)

    S. Garrigues

    2014-10-01

    Full Text Available Evapotranspiration has been recognized as one of the most uncertain term in the surface water balance simulated by land surface models. In this study, the SURFEX/ISBA-A-gs simulations of evapotranspiration are assessed at local scale over a 12 year Mediterranean crop succession. The model is evaluated in its standard implementation which relies on the use of the ISBA pedotransfer estimates of the soil properties. The originality of this work consists in explicitly representing the succession of crop cycles and inter-crop bare soil periods in the simulations and assessing its impact on the dynamic of simulated and measured evapotranspiration over a long period of time. The analysis focuses on key soil parameters which drive the simulation of evapotranspiration, namely the rooting depth, the soil moisture at saturation, the soil moisture at field capacity and the soil moisture at wilting point. The simulations achieved with the standard values of these parameters are compared to those achieved with the in situ values. The portability of the ISBA pedotransfer functions is evaluated over a typical Mediterranean crop site. Various in situ estimates of the soil parameters are considered and distinct parametrization strategies are tested to represent the evapotranspiration dynamic over the crop succession. This work shows that evapotranspiration mainly results from the soil evaporation when it is continuously simulated over a Mediterranean crop succession. The evapotranspiration simulated with the standard surface and soil parameters of the model is largely underestimated. The deficit in cumulative evapotranspiration amounts to 24% over 12 years. The bias in daily daytime evapotranspiration is −0.24 mm day−1. The ISBA pedotransfer estimates of the soil moisture at saturation and at wilting point are overestimated which explains most of the evapotranspiration underestimation. The overestimation of the soil moisture at wilting point causes the

  17. Evaluation of land surface model simulations of evapotranspiration over a 12 year crop succession: impact of the soil hydraulic properties

    Science.gov (United States)

    Garrigues, S.; Olioso, A.; Calvet, J.-C.; Martin, E.; Lafont, S.; Moulin, S.; Chanzy, A.; Marloie, O.; Desfonds, V.; Bertrand, N.; Renard, D.

    2014-10-01

    Evapotranspiration has been recognized as one of the most uncertain term in the surface water balance simulated by land surface models. In this study, the SURFEX/ISBA-A-gs simulations of evapotranspiration are assessed at local scale over a 12 year Mediterranean crop succession. The model is evaluated in its standard implementation which relies on the use of the ISBA pedotransfer estimates of the soil properties. The originality of this work consists in explicitly representing the succession of crop cycles and inter-crop bare soil periods in the simulations and assessing its impact on the dynamic of simulated and measured evapotranspiration over a long period of time. The analysis focuses on key soil parameters which drive the simulation of evapotranspiration, namely the rooting depth, the soil moisture at saturation, the soil moisture at field capacity and the soil moisture at wilting point. The simulations achieved with the standard values of these parameters are compared to those achieved with the in situ values. The portability of the ISBA pedotransfer functions is evaluated over a typical Mediterranean crop site. Various in situ estimates of the soil parameters are considered and distinct parametrization strategies are tested to represent the evapotranspiration dynamic over the crop succession. This work shows that evapotranspiration mainly results from the soil evaporation when it is continuously simulated over a Mediterranean crop succession. The evapotranspiration simulated with the standard surface and soil parameters of the model is largely underestimated. The deficit in cumulative evapotranspiration amounts to 24% over 12 years. The bias in daily daytime evapotranspiration is -0.24 mm day-1. The ISBA pedotransfer estimates of the soil moisture at saturation and at wilting point are overestimated which explains most of the evapotranspiration underestimation. The overestimation of the soil moisture at wilting point causes the underestimation of

  18. Oxidation of FGD-CaSO{sub 3} and effect on soil chemical properties when applied to the soil surface

    Energy Technology Data Exchange (ETDEWEB)

    Liming Chen; Cliff Ramsier; Jerry Bigham; Brian Slater; David Kost; Yong Bok Lee; Warren A. Dick [Ohio State University, Wooster, OH (United States). School of Environment and Natural Resources

    2009-07-15

    Use of high-sulfur coal for power generation in the United States requires the removal of sulfur dioxide (SO{sub 2}) produced during burning in order to meet clean air regulations. If SO{sub 2} is removed from the flue gas using a wet scrubber without forced air oxidation, much of the S product created will be sulfite (SO{sub 3}{sup 2-}). Plants take up S in the form of sulfate (SO{sub 2}{sup 2-}). Sulfite may cause damage to plant roots, especially in acid soils. For agricultural uses, it is thought that SO{sub 4}{sup 2-} in flue gas desulfurization (FGD) products must first oxidize to SO{sub 4}{sup 2-} in soils before crops are planted. However, there is little information about the oxidation of SO{sub 3}{sup 2-} in FGD product to SO{sub 4}{sup 2-} under field conditions. An FGD-CaSO{sub 3} was applied at rates of 0, 1.12, and 3.36 Mg ha{sup -1} to the surface of an agricultural soil (Wooster silt loam, Oxyaquic Fragiudalf). The SO{sub 4}{sup 2-} in the surface soil (0-10 cm) was analyzed on days 3, 7, 17, 45, and 61. The distribution of SO{sub 4}{sup 2-} and Ca in the 0-90 cm soil layer was also determined on day 61. Results indicated that SO{sub 3}{sup 2-} in the FGD-CaSO{sub 3} rapidly oxidized to SO{sub 4}{sup 2-} on the field surface during the first week and much of the SO{sub 4}{sup 2-} and Ca moved downward into the 0-50 cm soil layer during the experimental period of two months. It is safe to grow plants in soil treated with FGD-CaSO{sub 3} if the application is made at least three days to several weeks before planting. 20 refs., 6 figs., 4 tabs.

  19. Effect of rainfall and tillage direction on the evolution of surface crusts, soil hydraulic properties and runoff generation for a sandy loam soil

    Science.gov (United States)

    Ndiaye, Babacar; Esteves, Michel; Vandervaere, Jean-Pierre; Lapetite, Jean-Marc; Vauclin, Michel

    2005-06-01

    The study was aimed at evaluating the effect of rainfall and tillage-induced soil surface characteristics on infiltration and runoff on a 2.8 ha catchment located in the central region of Senegal. This was done by simulating 30 min rain storms applied at a constant rate of about 70 mm h -1, on 10 runoff micro-plots of 1 m 2, five being freshly harrowed perpendicularly to the slope and five along the slope (1%) of the catchment. Runoff was automatically recorded at the outlet of each plot. Hydraulic properties such as capillary sorptivity and hydraulic conductivity of the sandy loam soil close to saturation were determined by running 48 infiltration tests with a tension disc infiltrometer. That allowed the calculation of a mean characteristic pore size hydraulically active and a time to ponding. Superficial water storage capacity was estimated using data collected with an electronic relief meter. Because the soil was subject to surface crusting, crust-types as well as their spatial distribution within micro-plots and their evolution with time were identified and monitored by taking photographs at different times after tillage. The results showed that the surface crust-types as well as their tillage dependent dynamics greatly explain the decrease of hydraulic conductivity and sorptivity as the cumulative rainfall since tillage increases. The exponential decaying rates were found to be significantly greater for the soil harrowed along the slope (where the runoff crust-type covers more than 60% of the surface after 140 mm of rain) than across to the slope (where crusts are mainly of structural (60%) and erosion (40%) types). That makes ponding time smaller and runoff more important. Also it was shown that soil hydraulic properties after about 160 mm of rain were close to those of untilled plot not submitted to any rain. That indicates that the effects of tillage are short lived.

  20. Thermal Properties of Soils

    Science.gov (United States)

    1981-12-01

    plagio - clase feldspar and pyroxene. The tine fraction may Surface area and its effects contain the clay "sheet" minerals (i.e. kaolinite. illite...Pyroxene, Kaoliniwe Unified By By Ortho. Plagio . amphibole, Basic clay min. Hematite Soil Soil soil petrogr. X.ray clase clase and Igneous and clay and no

  1. Surface runoff, subsurface drainflow and soil erosion as affected by tillage in a clayey Finnish soil

    National Research Council Canada - National Science Library

    Turtola, Eila; Alakukku, Laura; Uusitalo, Risto; Kaseva, Antti

    2007-01-01

    Conservation tillage practices were tested against autumn mouldboard ploughing for differences in physical properties of soil, surface runoff, subsurface drainflow and soil erosion. The study (1991-2001...

  2. Land management effects on near-surface soil properties of southern U.S. coastal plain kandiudults.

    Science.gov (United States)

    M. Levi; J. Shaw; C. Wood; S. Herman; E. Carter; Y. Feng

    2010-01-01

    A comparative assessment of land management systems and relatively undisturbed ecosystems is useful for evaluating anthropogenic impacts on soil properties (Larson and Pierce, 1994). Such information is useful for the restoration and evaluation of C sequestration potential. Comparison of disturbed with natural ecosystems allows the measurement of soil properties...

  3. Effects of maquis clearing on the properties of the soil and on the near-surface hydrological processes in a semi-arid Mediterranean environment

    Directory of Open Access Journals (Sweden)

    Mario Pirastru

    2014-12-01

    the macropores in the grassed soil being destroyed after the maquis had been cleared and the soil ploughed. The results of this work are helpful for predicting the changes in the hydraulic properties of the soil and in the near-surface hydrological processes in similar Mediterranean environments where the natural vegetation has been cleared. These changes must be taken into consideration when developing rainfall-runoff models for flood forecasting and water yield evaluation.

  4. Lunar surface engineering properties experiment definition. Volume 2: Mechanics of rolling sphere-soil slope interaction

    Science.gov (United States)

    Hovland, H. J.; Mitchell, J. K.

    1971-01-01

    The soil deformation mode under the action of a rolling sphere (boulder) was determined, and a theory based on actual soil failure mechanism was developed which provides a remote reconnaissance technique for study of soil conditions using boulder track observations. The failure mechanism was investigated by using models and by testing an instrumented spherical wheel. The wheel was specifically designed to measure contact pressure, but it also provided information on the failure mechanism. Further tests included rolling some 200 spheres down sand slopes. Films were taken of the rolling spheres, and the tracks were measured. Implications of the results and reevaluation of the lunar boulder tracks are discussed.

  5. Development of a surface modeling method for mapping soil properties%一种土壤属性制图的曲面建模方法

    Institute of Scientific and Technical Information of China (English)

    SHI Wenjiao; LIU Jiyuan; DU Zhengping; YUE Tianxiang

    2012-01-01

    @@%High accuracy surface modeling (HASM) is a method which can be applied to soil property interpolation.In this paper,we present a method of HASM combined geographic information for soil property interpolation (HASM-SP) to improve the accuracy.Based on soil types,land use types and parent rocks,HASM-SP was applied to interpolate soil available P,Li,pH,alkali-hydrolyzable N,total K and Cr in a typical red soil hilly region.To evaluate the performance of HASM-SP,we compared its performance with that of ordinary kriging (OK),ordinary kriging combined geographic information (OK-Geo) and stratified kriging (SK).The results showed that the methods combined with geographic information including HASM-SP and OK-Geo obtained a lower estimation bias.HASM-SP also showed less MAEs and RMSEs when it was compared with the other three methods (OK-Geo,OK and SK).Much more details were presented in the HASM-SP maps for soil properties due to the combination of different types of geographic information which gave abrupt boundary for the spatial variation of soil properties.Therefore,HASM-SP can not only reduce prediction errors but also can be accordant with the distribution of geographic information,which make the spatial simulation of soil property more reasonable.HASM-SP has not only enriched the theory of high accuracy surface modeling of soil property,but also provided a scientific method for the application in resource management and environment planning.

  6. A method for the determination of the hydraulic properties of soil from MODIS surface temperature for use in land-surface models

    Science.gov (United States)

    Gutmann, Ethan D.; Small, Eric E.

    2010-06-01

    Soil hydraulic properties (SHPs) play an important role in land-surface models, but their spatial distribution is poorly known, and it is not feasible to make field measurements of SHPs everywhere they are needed. In addition, the scale SHPs are measured on (10 cm) is substantially smaller than the scale at which land-surface models are run (>1 km). As a result, land-surface models need landscape hydraulic properties (LHPs), not SHPs. We present a method for identifying LHPs from MODIS surface temperatures. We calibrated LHPs in the Noah land-surface model using MODIS surface temperatures in 2005 at 14 sites from the Atmospheric Radiation Measurement Program (ARM) using locally observed forcing data from 2005. We then used observed flux data during this same time period for model verification. Next, we determined LHPs from MODIS surface temperature at five sites using High Resolution Land Data Assimilation forcing data from 2002. We then used these LHPS to run Noah with 2005 ARM forcing data and compared the output to the same observed 2005 fluxes. Fitting LHPs to MODIS data decreases the error in modeled latent heat flux from 98 W/m2 to 67 W/m2. Fitting LHPs to these same latent heat flux measurements decreases the error to 50 W/m2. Therefore, two thirds of the parameter estimation improvement from calibration to in situ flux data can be achieved using remotely sensed surface temperature. These results are insensitive to errors in other parameters. For example, changing albedo by 0.1 changes the saturated conductivity (Ks) by 10% and the van Genuchten "m" parameter by 1%. However, changing minimum canopy resistance by 40 s/m produced a significant but mutually compensating change in both Ks and "m."

  7. The effect of intrinsic soil properties on soil quality assessments

    Directory of Open Access Journals (Sweden)

    Alessandro Samuel-Rosa

    2013-10-01

    Full Text Available The assessment of soil quality is based on indicators and indices derived from soil properties. However, intrinsic soil properties may interfere with other soil properties that vary under different land uses and are used to calculate the indices. The aim of this study was to assess the extent to which intrinsic soil properties (clay and iron oxide contents explain variable soil properties (sum of bases, potential acidity, organic carbon, total porosity, and bulk density under different land uses (native forest, no-tillage and conventional agriculture on small family farms in Southern Brazil. The results showed that the five properties evaluated can be included in soil quality assessments and are not influenced by the clay and iron oxide contents. It was concluded that for little weathered 1:1 and 2:1 phyllosilicate rich-soils, if the difference between the maximum and the minimum clay content under the different land uses is less than about 200 g kg-1 and the iron oxide content less than about 15 g kg-1, the physico-chemical soil properties in the surface layer are determined mostly by the land use.

  8. The influence of time on the magnetic properties of late Quaternary periglacial and alluvial surface and buried soils along the Delaware River, USA

    Directory of Open Access Journals (Sweden)

    Gary E Stinchcomb

    2014-08-01

    Full Text Available Magnetic susceptibility of soils has been used as a proxy for rainfall, but other factors can contribute to magnetic enhancement in soils. Here we explore influence of century- to millennial-scale duration of soil formation on periglacial and alluvial soil magnetic properties by assessing three terraces with surface and buried soils ranging in exposure ages from <0.01 to ~16 kyrs along the Delaware River in northeastern USA. The A and B soil horizons have higher Xlf, Ms, and S-ratios compared to parent material, and these values increase in a non-linear fashion with increasing duration of soil formation. Magnetic remanence measurements show a mixed low- and high-coercivity mineral assemblage likely consisting of goethite, hematite and maghemite that contributes to the magnetic enhancement of the soil. Room-temperature and low-temperature field-cooled and zero field-cooled remanence curves confirm the presence of goethite and magnetite and show an increase in magnetization with increasing soil age. These data suggest that as the Delaware alluvial soils weather, the concentration of secondary ferrimagnetic minerals increase in the A and B soil horizons. We then compared the time-dependent Xlf from several age-constrained buried alluvial soils with known climate data for the region during the Quaternary. Contradictory to most studies that suggest a link between increases in magnetic susceptibility and high moisture, increased magnetic enhancement of Delaware alluvial soils coincides with dry climate intervals. Early Holocene enhanced soil Xlf (9.5 – 8.5 ka corresponds with a well-documented cool-dry climate episode. This relationship is probably related to less frequent flooding during dry intervals allowing more time for low-coercive pedogenic magnetic minerals to form and accumulate, which resulted in increased Xlf. Middle Holocene enhanced Xlf (6.1 – 4.3 ka corresponds with a transitional wet/dry phase and a previously documented incision

  9. Soil properties, soil functions and soil security

    Science.gov (United States)

    Poggio, Laura; Gimona, Alessandro

    2017-04-01

    Soil plays a crucial role in the ecosystem functioning such as food production, capture and storage of water, carbon and nutrients and in the realisation of a number of UN Sustainable Developments Goals. In this work we present an approach to spatially and jointly assess the multiple contributions of soil to the delivery of ecosystem services within multiple land-use system. We focussed on the modelling of the impact of soil on sediment retention, carbon storage, storing and filtering of nutrients, habitat for soil organisms and water regulation, taking into account examples of land use and climate scenarios. Simplified models were used for the single components. Spatialised Bayesian Belief networks were used for the jointly assessment and mapping of soil contribution to multiple land use and ecosystem services. We integrated continuous 3D soil information derived from digital soil mapping approaches covering the whole of mainland Scotland, excluding the Northern Islands. Uncertainty was accounted for and propagated across the whole process. The Scottish test case highlights the differences in roles between mineral and organic soils and provides an example of integrated study assessing the contributions of soil. The results show the importance of the multi-functional analysis of the contribution of soils to the ecosystem service delivery and UN SDGs.

  10. Estimating soil moisture and soil thermal and hydraulic properties by assimilating soil temperatures using a particle batch smoother

    Science.gov (United States)

    Dong, Jianzhi; Steele-Dunne, Susan C.; Ochsner, Tyson E.; Giesen, Nick van de

    2016-05-01

    This study investigates the potential of estimating the soil moisture profile and the soil thermal and hydraulic properties by assimilating soil temperature at shallow depths using a particle batch smoother (PBS) using synthetic tests. Soil hydraulic properties influence the redistribution of soil moisture within the soil profile. Soil moisture, in turn, influences the soil thermal properties and surface energy balance through evaporation, and hence the soil heat transfer. Synthetic experiments were used to test the hypothesis that assimilating soil temperature observations could lead to improved estimates of soil hydraulic properties. We also compared different data assimilation strategies to investigate the added value of jointly estimating soil thermal and hydraulic properties in soil moisture profile estimation. Results show that both soil thermal and hydraulic properties can be estimated using shallow soil temperatures. Jointly updating soil hydraulic properties and soil states yields robust and accurate soil moisture estimates. Further improvement is observed when soil thermal properties were also estimated together with the soil hydraulic properties and soil states. Finally, we show that the inclusion of a tuning factor to prevent rapid fluctuations of parameter estimation, yields improved soil moisture, temperature, and thermal and hydraulic properties.

  11. The Effect of Compost and the Ripe Fruit Waste of Fig on some Physical Properties of Surface Soil

    Directory of Open Access Journals (Sweden)

    zahra dianat maharluei

    2017-02-01

    Full Text Available Introduction: In arid and semi-arid soils, low organic matter is one of the barriers to achieving optimal performance. The soils with more organic matter have a better structure and are more resistant to erosive factors such as water and wind. Soil organic matter has a particular importance and has significant impact on the stability of soil aggregates, the extension of plant root system, carbon and water cycles and soil resistance to erosion. This substance acts as a cementing agent and plays an important role in soil flocculation and formation of resistant aggregates.Also, the addition of organic matter to the soil increases soil porosity and decreases soil bulk density. Materials and Methods: In this research, the effect of the two types of organic matter (compost and the ripe fruit waste of fig on some soil physical properties was studied. A factorial experiment based on completely randomized design, including the four levels of compost and the ripe fruit waste of fig (0, 1, 2 and 4 by weight % and three soil types (loamy sand, loam and silty clay loam with three replications was carried out. The soil samples were collected from the three territories of Fars Province: loamy sand soil from Shiraz, loamy soil from Maharlu and Silty clay loam soil from Zarghan area. The soil samples were air dried and passed through a 2 mm sieve. The physical properties including the bulk density, particle density, porosity, moisture content and soil crust strength was measured. In this research, the soil texture by hydrometer method, Electrical conductivity of the soil saturated paste extract by electrical conductivity meter, saturated paste pH by pH meter, seedling emergence test, soil crust strength by a pocket penetrometer (HUMBOLDT MFG.CO. bulk density by cylindrical sample and particle density by pycnometer method were measured. The fig fruit treatments were prepared by thoroughly mixing the dried powder of ripe fig fruit passed through a 2 mm sieve (with

  12. Evaluation of land surface model simulations of evapotranspiration over a 12-year crop succession: impact of soil hydraulic and vegetation properties

    Science.gov (United States)

    Garrigues, S.; Olioso, A.; Calvet, J. C.; Martin, E.; Lafont, S.; Moulin, S.; Chanzy, A.; Marloie, O.; Buis, S.; Desfonds, V.; Bertrand, N.; Renard, D.

    2015-07-01

    Evapotranspiration has been recognized as one of the most uncertain terms in the surface water balance simulated by land surface models. In this study, the SURFEX/ISBA-A-gs (Interaction Sol-Biosphere-Atmosphere) simulations of evapotranspiration are assessed at the field scale over a 12-year Mediterranean crop succession. The model is evaluated in its standard implementation which relies on the use of the ISBA pedotransfer estimates of the soil properties. The originality of this work consists in explicitly representing the succession of crop cycles and inter-crop bare soil periods in the simulations and assessing its impact on the dynamics of simulated and measured evapotranspiration over a long period of time. The analysis focuses on key parameters which drive the simulation of ET, namely the rooting depth, the soil moisture at saturation, the soil moisture at field capacity and the soil moisture at wilting point. A sensitivity analysis is first conducted to quantify the relative contribution of each parameter on ET simulation over 12 years. The impact of the estimation method used to retrieve the soil parameters (pedotransfer function, laboratory and field methods) on ET is then analysed. The benefit of representing the variations in time of the rooting depth and wilting point is evaluated. Finally, the propagation of uncertainties in the soil parameters on ET simulations is quantified through a Monte Carlo analysis and compared with the uncertainties triggered by the mesophyll conductance which is a key above-ground driver of the stomatal conductance. This work shows that evapotranspiration mainly results from the soil evaporation when it is continuously simulated over a Mediterranean crop succession. This results in a high sensitivity of simulated evapotranspiration to uncertainties in the soil moisture at field capacity and the soil moisture at saturation, both of which drive the simulation of soil evaporation. Field capacity was proved to be the most

  13. Engineering Properties of Expansive Soil

    Institute of Scientific and Technical Information of China (English)

    DAI Shaobin; SONG Minghai; HUANG Jun

    2005-01-01

    The components of expansive soil were analyzed with EDAX, and it is shown that the main contents of expansive soil in the northern Hubei have some significant effects on engineering properties of expansive soil. Furthermore, the soil modified by lime has an obvious increase of Ca2+ and an improvement of connections between granules so as to reduce the expansibility and contractility of soil. And it also has a better effect on the modified expansive soil than the one modified by pulverized fuel ash.

  14. Changes in structural stability with soil surface degradation. Consequences for soil erosion processes

    OpenAIRE

    Darboux, Frédéric; Le Bissonnais, Yves

    2006-01-01

    Hydrological Science, section 39 - Soil Science Systems, section 23: Dryland hydrologySRef-ID: 1607-7962/gra/EGU06-A-07243; Erosion and sediment transport processes depend on the soil surface properties. Because of water flow and other processes (climate, agricultural practices, biological activity, etc.), the properties of the soil surface can undergo significant changes that affect erosion. As a consequence, understanding of the transport processes and improvement in soil erosion prediction...

  15. Effect of cryogel on soil properties

    Science.gov (United States)

    Altunina, L. K.; Fufaeva, M. S.; Filatov, D. A.; Svarovskaya, L. I.; Rozhdestvenskii, E. A.; Gan-Erdene, T.

    2014-05-01

    Samples from the A1 and A1A2 horizons of sandy loamy gray forest soil containing 3.1% organic matter have been mixed with a 5% solution of polyvinyl alcohol (PVA) at a ratio of 7 : 1 under laboratory conditions. The samples were frozen at -20°C in a refrigerator; after a freezing-thawing cycle, the evaporation of water from their surface, their thermal conductivity coefficient, their elasticity modulus, and other properties were studied. It has been experimentally found that the thermal conductivity coefficient of cryostructured soil is lower than that of common soil by 25%. It has been shown that the cryostructured soil retains water for a longer time and that the water evaporation rate from its surface is significantly lower compared to the control soil. Cryogel has no negative effect on the catalase activity of soil; it changes the physical properties of soils and positively affects the population of indigenous soil microflora and the growth of the sown plants.

  16. Measuring Disturbance Impact on Soil Hydraulic Properties

    Science.gov (United States)

    Hinshaw, S.; Mirus, B. B.

    2014-12-01

    Disturbances associated with land cover change such as forest clearing and mono-cropping can have a substantial impact on soil-hydraulic properties, which in turn have a cascading impact on surface and near-surface hydrologic response. Although disturbances and vegetation change can alter soil-water retention and conductivity relations, hydrologic models relying on traditional soil-texture based pedotransfer functions would not be able to capture the disturbance impact on infiltration and soil-moisture storage. Therefore, in-situ estimates of characteristic curves of soil water retention and hydraulic conductivity relations are needed to understand and predict hydrologic impacts of land cover change. We present a method for in-situ estimates of effective characteristic curves that capture hysteretic soil-water retention properties at the plot scale. We apply this method to two different forest treatments and in urban settings to investigate the impact of land-use disturbances on soil-hydraulic properties. We compare our in-situ estimation method to results for simple pedotransfer functions to illustrate how this approach can improve understanding of disturbance impacts on hydrologic processes and function.

  17. Physical properties of soils in Rostov agglomeration

    Science.gov (United States)

    Gorbov, S. N.; Bezuglova, O. S.; Abrosimov, K. N.; Skvortsova, E. B.; Tagiverdiev, S. S.; Morozov, I. V.

    2016-08-01

    Physical properties of natural and anthropogenically transformed soils of Rostov agglomeration were examined. The data obtained by conventional methods and new approaches to the study of soil physical properties (in particular, tomographic study of soil monoliths) were used for comparing the soils of different functional zones of the urban area. For urban territories in the steppe zone, a comparison of humus-accumulative horizons (A, Asod, Ap, and buried [A] horizons) made it possible to trace tendencies of changes in surface soils under different anthropogenic impacts and in the buried and sealed soils. The microtomographic study demonstrated differences in the bulk density and aggregation of urban soils from different functional zones. The A horizon in the forest-park zone is characterized by good aggregation and high porosity, whereas buried humus-accumulative horizons of anthropogenically transformed soils are characterized by poor aggregation and low porosity. The traditional parameters of soil structure and texture also proved to be informative for the identification of urban pedogenesis.

  18. Using 137 Cs measurements to investigate the influence of erosion and soil redistribution on soil properties.

    Science.gov (United States)

    Du, P; Walling, D E

    2011-05-01

    Information on the interaction between soil erosion and soil properties is an important requirement for sustainable management of the soil resource. The relationship between soil properties and the soil redistribution rate, reflecting both erosion and deposition, is an important indicator of this interaction. This relationship is difficult to investigate using traditional approaches to documenting soil redistribution rates involving erosion plots and predictive models. However, the use of the fallout radionuclide (137)Cs to document medium-term soil redistribution rates offers a means of overcoming many of the limitations associated with traditional approaches. The study reported sought to demonstrate the potential for using (137)Cs measurements to assess the influence of soil erosion and redistribution on soil properties (particle size composition, total C, macronutrients N, P, K and Mg, micronutrients Mn, Mo, Fe, Cu and Zn and other elements, including Ti and As). (137)Cs measurements undertaken on 52 soil cores collected within a 7 ha cultivated field located near Colebrooke in Devon, UK were used to establish the magnitude and spatial pattern of medium-term soil redistribution rates within the field. The soil redistribution rates documented for the individual sampling points within the field ranged from an erosion rate of -12.9 t ha(-1) yr(-1) to a deposition rate of 19.2 t ha(-1) yr(-1). Composite samples of surface soil (0-5 cm) were collected immediately adjacent to each coring point and these samples were analysed for a range of soil properties. Individual soil properties associated with these samples showed significant variability, with CV values generally lying in the range 10-30%. The relationships between the surface soil properties and the soil redistribution rate were analysed. This analysis demonstrated statistically significant relationships between some soil properties (total phosphorus, % clay, Ti and As) and the soil redistribution rate, but for

  19. Investigation of soil properties influence on the heavy metals sorption by plants and possibilities for prediction of their bioaccumulation by response surface methodology

    Directory of Open Access Journals (Sweden)

    Veličković Zlate

    2016-01-01

    Full Text Available The aim of this study was to determine soil properties influence on the heavy metals sorption by vegetables which are used in the diet and possibilities for prediction of their bioaccumulation by response surface methodology (RSM. Lettuce was used as biosorbent, and cadmium (Cd and lead (Pb were used as contaminants. Lettuce is grown on compost (previously contaminated with different concentrations of Cd and Pb which pH was adjusted with different amounts of NPK fertilizers. The content of heavy metals was determined by ICP-MS. Results showed that Cd content in lettuce was below the toxic values, but Pb concentration was above allowable, which indicates that limit value for Pb is not set in accordance with the food safety regulations. It was found that the heavy metals accumulation in plants depends not only on its content in the soil, but also on the plant affinity to the specific metal, and the individual or the interactive effects of different soil properties. Through the transfer factor it was found that lettuce has a much higher affinity to Cd in relation to Pb. RSM has proved to be very good for the examination of a large number of variables with a small number of experiments.

  20. Inverse modeling of soil characteristics from surface soil moisture observations: potential and limitations

    Directory of Open Access Journals (Sweden)

    A. Loew

    2008-01-01

    Full Text Available Land surface models (LSM are widely used as scientific and operational tools to simulate mass and energy fluxes within the soil vegetation atmosphere continuum for numerous applications in meteorology, hydrology or for geobiochemistry studies. A reliable parameterization of these models is important to improve the simulation skills. Soil moisture is a key variable, linking the water and energy fluxes at the land surface. An appropriate parameterisation of soil hydraulic properties is crucial to obtain reliable simulation of soil water content from a LSM scheme. Parameter inversion techniques have been developed for that purpose to infer model parameters from soil moisture measurements at the local scale. On the other hand, remote sensing methods provide a unique opportunity to estimate surface soil moisture content at different spatial scales and with different temporal frequencies and accuracies. The present paper investigates the potential to use surface soil moisture information to infer soil hydraulic characteristics using uncertain observations. Different approaches to retrieve soil characteristics from surface soil moisture observations is evaluated and the impact on the accuracy of the model predictions is quantified. The results indicate that there is in general potential to improve land surface model parameterisations by assimilating surface soil moisture observations. However, a high accuracy in surface soil moisture estimates is required to obtain reliable estimates of soil characteristics.

  1. Gamma-ray computed tomography to characterize soil surface sealing

    Energy Technology Data Exchange (ETDEWEB)

    Pires, L.F.Luiz F. E-mail: lfpires@cena.usp.br; Macedo, Jose R. de; Souza, Manoel D. de; Bacchi, Osny O.S.; Reichardt, Klaus

    2002-09-01

    The application of sewage sludge as a fertilizer on soils may cause compacted surface layers (surface sealing), which can promote changes on soil physical properties. The objective of this work was to study the use of gamma-ray computed tomography, as a diagnostic tool for the evaluation of this sealing process through the measurement of soil bulk density distribution of the soil surface layer of samples subjected to sewage sludge application. Tomographic images were taken with a first generation tomograph with a resolution of 1 mm. The image analysis opened the possibility to obtain soil bulk density profiles and average soil bulk densities of the surface layer and to detect the presence of soil surface sealing. The sealing crust thickness was estimated to be in the range of 2-4 mm.

  2. Impact of soil properties on selected pharmaceuticals adsorption in soils

    Science.gov (United States)

    Kodesova, Radka; Kocarek, Martin; Klement, Ales; Fer, Miroslav; Golovko, Oksana; Grabic, Roman; Jaksik, Ondrej

    2014-05-01

    The presence of human and veterinary pharmaceuticals in the environment has been recognized as a potential threat. Pharmaceuticals may contaminate soils and consequently surface and groundwater. Study was therefore focused on the evaluation of selected pharmaceuticals adsorption in soils, as one of the parameters, which are necessary to know when assessing contaminant transport in soils. The goals of this study were: (1) to select representative soils of the Czech Republic and to measure soil physical and chemical properties; (2) to measure adsorption isotherms of selected pharmaceuticals; (3) to evaluate impact of soil properties on pharmaceutical adsorptions and to propose pedotransfer rules for estimating adsorption coefficients from the measured soil properties. Batch sorption tests were performed for 6 selected pharmaceuticals (beta blockers Atenolol and Metoprolol, anticonvulsant Carbamazepin, and antibiotics Clarithromycin, Trimetoprim and Sulfamethoxazol) and 13 representative soils (soil samples from surface horizons of 11 different soil types and 2 substrates). The Freundlich equations were used to describe adsorption isotherms. The simple correlations between measured physical and chemical soil properties (soil particle density, soil texture, oxidable organic carbon content, CaCO3 content, pH_H2O, pH_KCl, exchangeable acidity, cation exchange capacity, hydrolytic acidity, basic cation saturation, sorption complex saturation, salinity), and the Freundlich adsorption coefficients were assessed using Pearson correlation coefficient. Then multiple-linear regressions were applied to predict the Freundlich adsorption coefficients from measured soil properties. The largest adsorption was measured for Clarithromycin (average value of 227.1) and decreased as follows: Trimetoprim (22.5), Metoprolol (9.0), Atenolol (6.6), Carbamazepin (2.7), Sulfamethoxazol (1.9). Absorption coefficients for Atenolol and Metoprolol closely correlated (R=0.85), and both were also

  3. The microbiology of arable soil surfaces

    OpenAIRE

    Jeffery, Simon

    2007-01-01

    Whilst much is known about the physics and erosion of soil surfaces on a millimetre scale, little is known about the associated microbiology, particularly in temperate arable systems. The vast majority of research regarding microbial interactions at soil surfaces has concerned microbiotic crusts. However, such surface crusts take many years to form and then only in relatively undisturbed soil systems. Arable soil surfaces are subject to relatively extreme environmental conditio...

  4. Degradation and Sorption of Imidacloprid in Dissimilar Surface and Subsurface Soils

    Science.gov (United States)

    Degradation and sorption/desorption are important processes affecting the leaching of pesticides through soil. Once pesticides move past the surface soil layers, subsurface soil physical, chemical, and biological properties significantly affect pesticide fate and the potential for groundwater contam...

  5. Cleaning and surface properties

    CERN Document Server

    Taborelli, M

    2007-01-01

    Principles of precision cleaning for ultra high vacuum applications are reviewed together with the techniques for the evaluation of surface cleanliness. Methods to verify the effectiveness of cleaning procedures are discussed. Examples are presented to illustrate the influence of packaging and storage on the recontamination of the surface after cleaning. Finally, the effect of contamination on some relevant surface properties, like secondary electron emission and wettability is presented.

  6. Surface Reactivity in Tropical Highly Weathered Soils and Implications for Rational Soil Management

    Institute of Scientific and Technical Information of China (English)

    R. MOREAU; J. PETARD

    2004-01-01

    Highly weathered soils are distributed in the humid and wet-dry tropics, as well as in the humid subtropics. As a result of strong weathering, these soils are characterized by low activity clays, which develop variable surface charge and related specific properties. Surface reactions regarding base exchange and soil acidification, heavy metal sorption and mobility, and phosphorus sorption and availability of the tropical highly weathered soils are reviewed in this paper.Factors controlling surface reactivity towards cations and anions, including ion exchange and specific adsorption processes, are discussed with consideration on practical implications for rational management of these soils. Organic matter content and pH value are major basic factors that should be controlled through appropriate agricultural practices, in order to optimise favorable effects of colloid surface properties on soil fertility and environmental quality.

  7. Vesta surface thermal properties map

    Science.gov (United States)

    Capria, Maria Teresa; Tosi, F.; De Santis, Maria Cristina; Capaccioni, F.; Ammannito, E.; Frigeri, A.; Zambon, F; Fonte, S.; Palomba, E.; Turrini, D.; Titus, T.N.; Schroder, S.E.; Toplis, M.J.; Liu, J.Y.; Combe, J.-P.; Raymond, C.A.; Russell, C.T.

    2014-01-01

    The first ever regional thermal properties map of Vesta has been derived from the temperatures retrieved by infrared data by the mission Dawn. The low average value of thermal inertia, 30 ± 10 J m−2 s−0.5 K−1, indicates a surface covered by a fine regolith. A range of thermal inertia values suggesting terrains with different physical properties has been determined. The lower thermal inertia of the regions north of the equator suggests that they are covered by an older, more processed surface. A few specific areas have higher than average thermal inertia values, indicative of a more compact material. The highest thermal inertia value has been determined on the Marcia crater, known for its pitted terrain and the presence of hydroxyl in the ejecta. Our results suggest that this type of terrain can be the result of soil compaction following the degassing of a local subsurface reservoir of volatiles.

  8. Bacterial community structure and soil properties of a subarctic tundra soil in Council, Alaska.

    Science.gov (United States)

    Kim, Hye Min; Jung, Ji Young; Yergeau, Etienne; Hwang, Chung Yeon; Hinzman, Larry; Nam, Sungjin; Hong, Soon Gyu; Kim, Ok-Sun; Chun, Jongsik; Lee, Yoo Kyung

    2014-08-01

    The subarctic region is highly responsive and vulnerable to climate change. Understanding the structure of subarctic soil microbial communities is essential for predicting the response of the subarctic soil environment to climate change. To determine the composition of the bacterial community and its relationship with soil properties, we investigated the bacterial community structure and properties of surface soil from the moist acidic tussock tundra in Council, Alaska. We collected 70 soil samples with 25-m intervals between sampling points from 0-10 cm to 10-20 cm depths. The bacterial community was analyzed by pyrosequencing of 16S rRNA genes, and the following soil properties were analyzed: soil moisture content (MC), pH, total carbon (TC), total nitrogen (TN), and inorganic nitrogen (NH4+ and NO3-). The community compositions of the two different depths showed that Alphaproteobacteria decreased with soil depth. Among the soil properties measured, soil pH was the most significant factor correlating with bacterial community in both upper and lower-layer soils. Bacterial community similarity based on jackknifed unweighted unifrac distance showed greater similarity across horizontal layers than through the vertical depth. This study showed that soil depth and pH were the most important soil properties determining bacterial community structure of the subarctic tundra soil in Council, Alaska.

  9. Surface modeling of soil antibiotics.

    Science.gov (United States)

    Shi, Wen-jiao; Yue, Tian-xiang; Du, Zheng-ping; Wang, Zong; Li, Xue-wen

    2016-02-01

    Large numbers of livestock and poultry feces are continuously applied into soils in intensive vegetable cultivation areas, and then some veterinary antibiotics are persistent existed in soils and cause health risk. For the spatial heterogeneity of antibiotic residues, developing a suitable technique to interpolate soil antibiotic residues is still a challenge. In this study, we developed an effective interpolator, high accuracy surface modeling (HASM) combined vegetable types, to predict the spatial patterns of soil antibiotics, using 100 surface soil samples collected from an intensive vegetable cultivation area located in east of China, and the fluoroquinolones (FQs), including ciprofloxacin (CFX), enrofloxacin (EFX) and norfloxacin (NFX), were analyzed as the target antibiotics. The results show that vegetable type is an effective factor to be combined to improve the interpolator performance. HASM achieves less mean absolute errors (MAEs) and root mean square errors (RMSEs) for total FQs (NFX+CFX+EFX), NFX, CFX and EFX than kriging with external drift (KED), stratified kriging (StK), ordinary kriging (OK) and inverse distance weighting (IDW). The MAE of HASM for FQs is 55.1 μg/kg, and the MAEs of KED, StK, OK and IDW are 99.0 μg/kg, 102.8 μg/kg, 106.3 μg/kg and 108.7 μg/kg, respectively. Further, RMSE simulated by HASM for FQs (CFX, EFX and NFX) are 106.2 μg/kg (88.6 μg/kg, 20.4 μg/kg and 39.2 μg/kg), and less 30% (27%, 22% and 36%), 33% (27%, 27% and 43%), 38% (34%, 23% and 41%) and 42% (32%, 35% and 51%) than the ones by KED, StK, OK and IDW, respectively. HASM also provides better maps with more details and more consistent maximum and minimum values of soil antibiotics compared with the measured data. The better performance can be concluded that HASM takes the vegetable type information as global approximate information, and takes local sampling data as its optimum control constraints.

  10. Surface electrical properties experiment

    Science.gov (United States)

    Simmons, Gene; Strangway, David; Annan, Peter; Baker, Richard G.; Bannister, Lawrence; Brown, Raymon; Cooper, William; Cubley, Dean; deBettencourt, Joseph; England, Anthony W.; Groener, John; Kong, Jin-Au; LaTorraca, Gerald; Meyer, James; Nanda, Ved; Redman, David; Rossiter, James; Tsang, Leung; Urner, Joseph; Watts, Raymond

    1973-01-01

    The surface electrical properties (SEP) experiment was used to explore the subsurface material of the Apollo 17 landing site by means of electromagnetic radiation. The experiment was designed to detect electrical layering, discrete scattering bodies, and the possible presence of water. From the analysis of the data, it was expected that values of the electrical properties (dielectric constant and loss tangent) of lunar material in situ would be obtained.

  11. Cadmium adsorption on plant- and manure-derived biochar and biochar-amended sandy soils: impact of bulk and surface properties.

    Science.gov (United States)

    Xu, Dongyu; Zhao, Ye; Sun, Ke; Gao, Bo; Wang, Ziying; Jin, Jie; Zhang, Zheyun; Wang, Shuifeng; Yan, Yu; Liu, Xitao; Wu, Fengchang

    2014-09-01

    To investigate the role of the bulk and surface composition of both biochar and biochar-amended soils in the adsorption of Cd(2+), as well as the influence of different biochars added to the soils on Cd(2+) adsorption, swine-manure-derived biochars (BSs) and wheat-straw-derived biochars (BWs) were produced at 300, 450, and 600°C. These biochars were added to a sandy soil to investigate the effect of biochars on the adsorption of Cd(2+) by soil. The significantly higher surface C content of the amended soils compared to their bulk C content suggests that the minerals of the biochar-amended soils are most likely covered primarily by biochars. The maximum adsorption capacity (Qmax,total) of the BSs was 10-15 times higher than that of the BWs due to the high polarity and ash content of the BSs. The polarity ((N+O)/C) of the low-temperature biochars greatly affected their Cd(2+) adsorption. The Qmax,total of the BS-amended soils increased with increasing dose, whereas the Qmax,total of the BW-amended soils showed the opposite behavior, which was attributed to the different surface composition characteristics of the two types of soil. The BSs were more effective in immobilizing Cd(2+) upon application to the soil relative to the BWs. This study elucidates the spatial distribution of biochars in biochar-amended soils and highlights the importance of the surface composition of the investigated samples in Cd(2+) adsorption.

  12. Predicting soil properties in the tropics

    NARCIS (Netherlands)

    Minasny, B.; Hartemink, A.E.

    2011-01-01

    It is practically impossible to measure soil properties continuously at each location across the globe. Therefore, it is necessary to have robust systems that can predict soil properties at a given location. That is needed in many tropical countries where the dearth of soil property measurements is

  13. Anisotropy of Soil Hydraulic Properties Along Arable Slopes

    Institute of Scientific and Technical Information of China (English)

    JING Yuan-Shu; ZHANG Bin; A.THIMM; H.ZEPP

    2008-01-01

    The spatial variations of the soil hydraulic properties were mainly considered in vertical direction.The objectives of this study were to measure water-retention curves,θ(ψ),and unsaturated hydraulic conductivity functions,K(ψ),of the soils sampled at different slope positions in three directions,namely,in vertical direction,along the slope and along the contour,and to determine the effects of sampling direction and slope position of two soil catenas.At the upper slope positions,the surface soils (0-10 cm) sampled in the vertical direction had a lower soil water content,θ,at a certain soil water potential (-1500 kPa <ψ<-10 kPa) and had the greatest unsaturated hydraulic conductivity,K,at ψ> -10kPa.At the lower slope positions,K at ψ>-10 kPa was smaller in the vertical direction than in the direction along the slope.The deep soils (100-110 cm) had similar soil hydraulic properties in all the three directions.The anisotropic variations of the hydraulic properties of the surface soils were ascribed to the effects of natural wetting and drying cycles on the structural heterogeneity.These results suggested that the anisotropy of soil hydraulic properties might be significant in influencing soil water movement along the slope and need to be considered in modeling.

  14. Predicting Soluble Nickel in Soils Using Soil Properties and Total Nickel.

    Science.gov (United States)

    Zhang, Xiaoqing; Li, Jumei; Wei, Dongpu; Li, Bo; Ma, Yibing

    2015-01-01

    Soil soluble nickel (Ni) concentration is very important for determining soil Ni toxicity. In the present study, the relationships between soil properties, total and soluble Ni concentrations in soils were developed in a wide range of soils with different properties and climate characteristics. The multiple regressions showed that soil pH and total soil Ni concentrations were the most significant parameters in predicting soluble Ni concentrations with the adjusted determination coefficients (Radj2) values of 0.75 and 0.68 for soils spiked with soluble Ni salt and the spiked soils leached with artificial rainwater to mimic field conditions, respectively. However, when the soils were divided into three categories (pH 8), they obtained better predictions with Radj2 values of 0.78-0.90 and 0.79-0.94 for leached and unleached soils, respectively. Meanwhile, the other soil properties, such as amorphous Fe and Al oxides and clay, were also found to be important for determining soluble Ni concentrations, indicating that they were also presented as active adsorbent surfaces. Additionally, the whole soil speciation including bulk soil properties and total soils Ni concentrations were analyzed by mechanistic speciation models WHAM VI and Visual MINTEQ3.0. It was found that WHAM VI provided the best predictions for the soils with pH 8. The Visual MINTEQ3.0 could provide better estimation for pH 8. These results indicated the possibility and applicability of these models to predict soil soluble Ni concentration by soil properties.

  15. Predicting Soluble Nickel in Soils Using Soil Properties and Total Nickel.

    Directory of Open Access Journals (Sweden)

    Xiaoqing Zhang

    Full Text Available Soil soluble nickel (Ni concentration is very important for determining soil Ni toxicity. In the present study, the relationships between soil properties, total and soluble Ni concentrations in soils were developed in a wide range of soils with different properties and climate characteristics. The multiple regressions showed that soil pH and total soil Ni concentrations were the most significant parameters in predicting soluble Ni concentrations with the adjusted determination coefficients (Radj2 values of 0.75 and 0.68 for soils spiked with soluble Ni salt and the spiked soils leached with artificial rainwater to mimic field conditions, respectively. However, when the soils were divided into three categories (pH 8, they obtained better predictions with Radj2 values of 0.78-0.90 and 0.79-0.94 for leached and unleached soils, respectively. Meanwhile, the other soil properties, such as amorphous Fe and Al oxides and clay, were also found to be important for determining soluble Ni concentrations, indicating that they were also presented as active adsorbent surfaces. Additionally, the whole soil speciation including bulk soil properties and total soils Ni concentrations were analyzed by mechanistic speciation models WHAM VI and Visual MINTEQ3.0. It was found that WHAM VI provided the best predictions for the soils with pH 8. The Visual MINTEQ3.0 could provide better estimation for pH 8. These results indicated the possibility and applicability of these models to predict soil soluble Ni concentration by soil properties.

  16. Predicting Soluble Nickel in Soils Using Soil Properties and Total Nickel

    Science.gov (United States)

    Zhang, Xiaoqing; Li, Jumei; Wei, Dongpu; Li, Bo; Ma, Yibing

    2015-01-01

    Soil soluble nickel (Ni) concentration is very important for determining soil Ni toxicity. In the present study, the relationships between soil properties, total and soluble Ni concentrations in soils were developed in a wide range of soils with different properties and climate characteristics. The multiple regressions showed that soil pH and total soil Ni concentrations were the most significant parameters in predicting soluble Ni concentrations with the adjusted determination coefficients (Radj2) values of 0.75 and 0.68 for soils spiked with soluble Ni salt and the spiked soils leached with artificial rainwater to mimic field conditions, respectively. However, when the soils were divided into three categories (pH 8), they obtained better predictions with Radj2 values of 0.78–0.90 and 0.79–0.94 for leached and unleached soils, respectively. Meanwhile, the other soil properties, such as amorphous Fe and Al oxides and clay, were also found to be important for determining soluble Ni concentrations, indicating that they were also presented as active adsorbent surfaces. Additionally, the whole soil speciation including bulk soil properties and total soils Ni concentrations were analyzed by mechanistic speciation models WHAM VI and Visual MINTEQ3.0. It was found that WHAM VI provided the best predictions for the soils with pH 8. The Visual MINTEQ3.0 could provide better estimation for pH 8. These results indicated the possibility and applicability of these models to predict soil soluble Ni concentration by soil properties. PMID:26217951

  17. Impacts of land leveling on lowland soil physical properties

    Directory of Open Access Journals (Sweden)

    José Maria Barbat Parfitt

    2014-02-01

    Full Text Available The practice of land leveling alters the soil surface to create a uniform slope to improve land conditions for the application of all agricultural practices. The aims of this study were to evaluate the impacts of land leveling through the magnitudes, variances and spatial distributions of selected soil physical properties of a lowland area in the State of Rio Grande do Sul, Brazil; the relationships between the magnitude of cuts and/or fills and soil physical properties after the leveling process; and evaluation of the effect of leveling on the spatial distribution of the top of the B horizon in relation to the soil surface. In the 0-0.20 m layer, a 100-point geo-referenced grid covering two taxonomic soil classes was used in assessment of the following soil properties: soil particle density (Pd and bulk density (Bd; total porosity (Tp, macroporosity (Macro and microporosity (Micro; available water capacity (AWC; sand, silt, clay, and dispersed clay in water (Disp clay contents; electrical conductivity (EC; and weighted average diameter of aggregates (WAD. Soil depth to the top of the B horizon was also measured before leveling. The overall effect of leveling on selected soil physical properties was evaluated by paired "t" tests. The effect on the variability of each property was evaluated through the homogeneity of variance test. The thematic maps constructed by kriging or by the inverse of the square of the distances were visually analyzed to evaluate the effect of leveling on the spatial distribution of the properties and of the top of the B horizon in relation to the soil surface. Linear regression models were fitted with the aim of evaluating the relationship between soil properties and the magnitude of cuts and fills. Leveling altered the mean value of several soil properties and the agronomic effect was negative. The mean values of Bd and Disp clay increased and Tp, Macro and Micro, WAD, AWC and EC decreased. Spatial distributions of all

  18. Soil Surface Structure: A key factor for the degree of soil water repellency

    Science.gov (United States)

    Ahn, S.; Doerr, S. H.; Douglas, P.; Bryant, R.; Hamlett, C.; McHale, G.; Newton, M.; Shirtcliffe, N.

    2012-04-01

    Despite of considerable efforts, the degree of water repellency has not always been fully explained by chemical property of soil (termed hydrophobicity). That might be because the structure of a soil surface was not considered properly, which is another main factor determining the severity of soil water repellency. Surface structure has only recently been considered in soil science, whilst it has been paid attention for several decades in materials science due to its relevance to industrial applications. In this contribution, comparison of critical contact angles measured on different surface structures (made with glass beads, glass shards and beach sands) is presented and the effect of surface structure on manifestation of soil water repellency is discussed in terms of several different variables such as the individual particles shape, and areal and structural factors of the actual surface.

  19. Vital Soil: Function, Value and Properties.

    Science.gov (United States)

    This article is a review of the book, Vital Soil: Function, Value and Properties. Soil vitality has been defined as the ability of soil ecosystems to stay in balance in a changing world. The soil environment and the life that it supports developed over centuries and millennia, but careless human ac...

  20. Improvement of Soil Physical Properties with Soil Conditioners

    Institute of Scientific and Technical Information of China (English)

    ZHAOBING-ZI; XUFU-AN

    1995-01-01

    Effects of non-ionic polyacrylamide(PAM),anionic polyacrylamide(PHP),cationic polyacrylamide(PCAM),non-ionic polyvinylalcohol(PVA),anionic hydrolyzed polyacrylonitrile(HPAN)and polyethleneoxide(PEO)on the physical properties of three different soil stpes were studied.content of water-stable aggregates larger than 0.25mm increased to varying extents for different soils and soil conditioners,Among the six kinds of condiftioners,non-ionic polyacrylamide(PAM) was the most effective for red soil while polyethyleneoxide(PEO)the least effective for Chao soil,red soil and yellow-brown soil.Water-stable aggregates with the molecular weight of PEO within a certain range.Only evaporation rate of Chao soil decreased after aplication of PAM and HPAN to Chao soil and red soil.

  1. Soil information requirements for humanitarian demining: the case for a soil properties database

    Science.gov (United States)

    Das, Yogadhish; McFee, John E.; Russell, Kevin L.; Cross, Guy; Katsube, T. John

    2003-09-01

    Landmines are buried typically in the top 30 cm of soil. A number of physical, chemical and electromagnetic properties of this near-surface layer of ground will potentially affect the wide range of technologies under development worldwide for landmine detection and neutralization. Although standard soil survey information, as related to conventional soil classification, is directed toward agricultural and environmental applications, little or no information seems to exist in a form that is directly useful to humanitarian demining and the related R&D community. Thus, there is a general need for an information database devoted specifically to relevant soil properties, their geographic distribution and climate-driven variability. A brief description of the various detection technologies is used to introduce the full range of related soil properties. Following a general description of the need to establish a comprehensive soil property database, the discussion is then narrowed to soil properties affecting electromagnetic induction metal detectors - a problem of much restricted scope but of immediate and direct relevance to humanitarian demining. In particular, the complex magnetic susceptibility and, to a lesser degree, electrical conductivity of the host soil influence the performance of these widely used tools, and in the extreme instance, can render detectors unusable. A database comprising these properties for soils of landmine-affected countries would assist in predicting local detector performance, planning demining operations, designing and developing improved detectors and establishing realistic and representative test-evaluation facilities. The status of efforts made towards developing a database involving soil electromagnetic properties is reported.

  2. Dependence of sand soil compressibility on soil physical properties

    Institute of Scientific and Technical Information of China (English)

    I.S.Vakhrin; G.P.Kuzmin

    2014-01-01

    A relationship between soil physical properties and its compressibility has been analyzed. The formulae to determine soil density and porosity have been substantiated in compression tests. The regularity of changes in compressibility of thawed sand soils with various degrees of water content has been experimentally identified.

  3. THE INFLUENCE OF SOME SOIL CHEMICAL PROPERTIES ON THEIR ERODABILITY

    Directory of Open Access Journals (Sweden)

    I. C. Stanga

    2005-10-01

    Full Text Available Soils from de hills and tableland regions, as well as those from subcarpathian area are characterized through higher erodability. The soils from mountain area present the lowest erodability, especially districambosol, due to the upper horizons properties. The erodabilidydepends on the ratio of historical geological erosion and surface erosion.

  4. Predicting saturated hydraulic conductivity using soil morphological properties

    Directory of Open Access Journals (Sweden)

    Gülay Karahan

    2016-01-01

    Full Text Available Many studies have been conducted to predict soil saturated hydraulic conductivity (Ks by parametric soil properties such as bulk density and particle-size distribution. Although soil morphological properties have a strong effect on Ks, studies predicting Ks by soil morphological properties such as type, size, and strength of soil structure; type, orientation and quantity of soil pores and roots and consistency are rare. This study aimed at evaluating soil morphological properties to predict Ks. Undisturbed soil samples (15 cm length and 8.0 cm id. were collected from topsoil (0-15 cm and subsoil (15-30 cm (120 samples with a tractor operated soil sampler at sixty randomly selected sampling sites on a paddy field and an adjecent grassland in Central Anatolia (Cankırı, Turkey. Synchronized disturbed soil samples were taken from the same sampling sites and sampling depths for basic soil analyses. Saturated hydraulic conductivity was measured on the soil columns using a constant-head permeameter. Following the Ks measurements, the upper part of soil columns were covered to prevent evaporation and colums were left to drain in the laboratory. When the water flow through the column was stopped, a subsample were taken for bulk density and then soil columns were disturbed for describing the soil morphological properties. In addition, soil texture, bulk density, pH, field capacity, wilting point, cation exchange capacity, specific surface area, aggregate stability, organic matter, and calcium carbonate were measured on the synchronized disturbed soil samples. The data were divided into training (80 data values and validation (40 data values sets. Measured values of Ks ranged from 0.0036 to 2.14 cmh-1 with a mean of 0.86 cmh-1. The Ks was predicted from the soil morphological and parametric properties by stepwise multiple linear regression analysis. Soil structure class, stickiness, pore-size, root-size, and pore-quantity contributed to the Ks prediction

  5. Soil Catena Properties of Daher Al- Jabal in South Syria

    Directory of Open Access Journals (Sweden)

    Hussam H. M. Husein

    2017-02-01

    Full Text Available Soil catena concept is a sequence of soils extends across relief positions and is developed from similar parent material. This study highlighted on the important aspects and properties of soil catena of Daher El-Jabal in Jabal Al-Arab mountainous area South eastern of Syria, by implementing pedologic study in 2010-2012. Six soil profiles have been studied along pedo-genetic transect in order to highlight the soil catena prevailing properties. The results reveal that the soil has formed from igneous basaltic parent casts, related to Neogen era, where reliefs had the key role in the developing of soil solum. Consequently, Entisols were dominated on eroded summits, Inceptisols on back slops and mountain flanks, Mollisols on depressions. Both water erosion of soil surface and leaching inside soil solum processes were responsible for variation of soil texture, as such soils showed evident of changing in particles size distribution as well as in clay content. Cation exchange capacity (CEC was less than moderate with domination of Magnesium cation. Soil trace elements were poor to somewhat poor. Soil pH values in general were low; which reflect the pedo-genic character of igneous parent material in which soil drifted from. In some cases, where soil body subjected to continuous leaching of soil bases, in particular calcium cation; soil profiles became totally freed from calcium carbonates. Accordingly soil problems related to downing of soil reaction (pH are more expected to be increasing by time. This is main reason for some physical diseases, which beginning arise on pomes fruits, particularly bitter pit.INTERNATIONAL JOURNAL OF ENVIRONMENT Volume-6, Issue-1, Dec-Feb 2016/17, page: 87-107

  6. Geotehnical Properties of Plastic Stabilized Lateritic Soil

    OpenAIRE

    Akinola Johnson Olarewaju

    2016-01-01

    Stabilization is the combination of soils and additives to change its properties and remain in its stable compacted state without undergoing any change under effect of exposure to weather and traffic. Soil stabilization through the reinforced soil construction is an efficient and reliable technique for improving the strength and stability of soils. The lateritic soil used in this study was taken along Papa-Ilaro road Ajegunle at Abalabi, Ogun State, Nigeria and the solid plastic wastes were t...

  7. Effect of mineral surface properties (alumina, kaolinite) on the sorptive fractionation mechanisms of soil fulvic acids: Molecular-scale ESI-MS studies

    Science.gov (United States)

    Fleury, Guillaume; Del Nero, Mirella; Barillon, Rémi

    2017-01-01

    We addressed the effects of mineral surface properties (kaolinite versus Al-oxide) on the sorption-driven fractionation of a soil fulvic acid (FA) at acidic pH, mainly by means of ESI(-)-FTMS analysis of initial and supernatant solutions of FA sorption batch experiments. The MS data provided clear molecular-scale evidence of distinct mechanisms and molecular parameters controlling the FA fractionation upon its sorption on clay and oxide surfaces, respectively. Identification of sorbing and not-sorbing FA compounds in kaolinite-solution systems revealed a weak fractionation among members of sbnd CO2 series of aliphatics or not-condensed aromatics (NCAs) at pH 3.8, and almost no sorption of poorly-oxygenated polycyclic aromatic compounds (PACs) and NCAs. This first molecular-scale description of a FA fractionation in a clay-solution system suggests that H-bonding with low affinity sites (aluminol/silanol) on the basal planes of the clay particles is the main mechanism of sorption. Due to the predominance of such weak and poorly-selective mechanism, the sorption of aliphatic and NCA molecules bearing oxygenated functionalities was prevented at pH 5, due to dissolved Al competing successfully for their coordination. In contrast, a strong FA fractionation was observed onto alumina, with a preferential retention of PACs and highly-oxygenated aliphatics and NCAs. The major part of the poorly oxygenated aliphatics was left in solution. The sorption degree of NCAs and aliphatics was strongly correlated with molecular acidity. For PACs and poorly-oxygenated NCAs, the sorption was driven by reactions of surface ligand exchange (for the most oxygenated compounds) or by hydrophobic interactions (for the least oxygenated compounds).

  8. Greywater reuse for irrigation: effect on soil properties.

    Science.gov (United States)

    Travis, Micheal J; Wiel-Shafran, Alit; Weisbrod, Noam; Adar, Eilon; Gross, Amit

    2010-05-15

    A controlled study of the effect of greywater (GW) irrigation on soil properties was conducted. Containers of sand, loam and loess soils were planted with lettuce, and irrigated with fresh water, raw artificial GW or treated artificial GW. Greywater was treated using a recirculating vertical-flow constructed wetland. Soil samples were collected every 10 days for the 40-day duration of the study, and plant growth was measured. Soils were analysed for physicochemical and biological parameters to determine changes caused by the different treatments. It was demonstrated that raw artificial GW significantly increased the development of hydrophobicity in the sand and loam soils, as determined by water droplet penetration time. No significant changes were observed for the loess soil under all treatments. Observed hydrophobicity was correlated with increased oil and grease and surfactant concentrations in the soil. Zeta (zeta) potential of the soils was measured to determine changes in the soil particle surface properties as a result of GW irrigation. A significant change in zeta-potential (less negative) was observed in the raw artificial GW-irrigated sand, whereas no difference was observed in the loam or loess. Soils irrigated with fresh water or treated GW exhibited no increase in hydrophobicity. Fecal coliform bacteria were absent or <10 CFU g(-1) in soils irrigated with fresh water or treated GW, but at least 1 order of magnitude higher in raw artificial GW irrigated soils. Only in the last sampling event and only for the loess soil was plant growth significantly higher for fresh water irrigated vs. raw or treated GW irrigated soils. This study demonstrates that treated GW can be effectively irrigated without detrimental effects on soil or plant growth; however, raw GW may significantly change soil properties that can impact the movement of water in soil and the transport of contaminants in the vadose zone.

  9. Synthesis of soil-hydraulic properties and infiltration timescales in wildfire-affected soils

    Science.gov (United States)

    Ebel, Brian A.; Moody, John A.

    2017-01-01

    We collected soil-hydraulic property data from the literature for wildfire-affected soils, ash, and unburned soils. These data were used to calculate metrics and timescales of hydrologic response related to infiltration and surface runoff generation. Sorptivity (S) and wetting front potential (Ψf) were significantly different (lower) in burned soils compared with unburned soils, whereas field-saturated hydraulic conductivity (Kfs) was not significantly different. The magnitude and duration of the influence of capillarity during infiltration was greatly reduced in burned soils, causing faster ponding times in response to rainfall. Ash had large values of S and Kfs but moderate values of Ψf, compared with unburned and burned soils, indicating ash has long ponding times in response to rainfall. The ratio of S2/Kfs was nearly constant (~100 mm) for unburned soils but more variable in burned soils, suggesting that unburned soils have a balance between gravity and capillarity contributions to infiltration that may depend on soil organic matter, whereas in burned soils the gravity contribution to infiltration is greater. Changes in S and Kfs in burned soils act synergistically to reduce infiltration and accelerate and amplify surface runoff generation. Synthesis of these findings identifies three key areas for future research. First, short timescales of capillary influences on infiltration indicate the need for better measurements of infiltration at times less than 1 min to accurately characterize S in burned soils. Second, using parameter values, such as Ψf, from unburned areas could produce substantial errors in hydrologic modeling when used without adjustment for wildfire effects, causing parameter compensation and resulting underestimation of Kfs. Third, more thorough measurement campaigns that capture soil-structural changes, organic matter impacts, quantitative water repellency trends, and soil-water content along with soil-hydraulic properties could drive the

  10. Towards high resolution soil property maps for Austria

    Science.gov (United States)

    Schürz, Christoph; Klotz, Daniel; Herrnegger, Mathew; Schulz, Karsten

    2015-04-01

    Soil hydraulic properties, such as soil texture, soil water retention characteristics, hydraulic conductivity, or soil depth are important inputs for hydrologic catchment modelling. However, the availability of such data in Austria is often insufficient to fulfill requirements of well-established hydrological models. Either, soil data is available in sufficient spatial resolution but only covers a small extent of the considered area, or the data is comprehensive but rather coarse in its spatial resolution. Furthermore, the level of detail and quality of the data differs between the available data sets. In order to generate a comprehensive soil data set for whole Austria that includes main soil physical properties, as well as soil depth and organic carbon content in a high spatial resolution (10x10 to 100x100m²) several available soil data bases are merged and harmonized. Starting point is a high resolution soil texture map that only covers agricultural areas and is available due to Austrian land appraisal. Soil physical properties for those areas are derived by applying pedotransfer functions (e.g. Saxton and Rawls, 2006) resulting in expectation values and quantiles of the respective property for each soil texture class. For agricultural areas where no texture information is available, the most likely soil texture is assigned applying a Bayesian network approach incorporating information such as elevation, soil slope, soil type, or hydro-geology at different spatial scales. Soil data for forested areas, that cover a large extent of the state territory, are rather sparse in Austria. For such areas a similar approach as for agricultural areas is applied by using a Bayesian network for prediction of the soil texture. Additionally, information to various soil parameters taken from literature is incorporated. For areas that are covered by land use different to agriculture or forestry, such as bare rock surfaces, or wetland areas, solely literature information is used

  11. Tillage system affects microbiological properties of soil

    Science.gov (United States)

    Delgado, A.; de Santiago, A.; Avilés, M.; Perea, F.

    2012-04-01

    Soil tillage significantly affects organic carbon accumulation, microbial biomass, and subsequently enzymatic activity in surface soil. Microbial activity in soil is a crucial parameter contributing to soil functioning, and thus a basic quality factor for soil. Since enzymes remain soil after excretion by living or disintegrating cells, shifts in their activities reflect long-term fluctuations in microbial biomass. In order to study the effects of no-till on biochemical and microbiological properties in comparison to conventional tillage in a representative soil from South Spain, an experiment was conducted since 1982 on the experimental farm of the Institute of Agriculture and Fisheries Research of Andalusia (IFAPA) in Carmona, SW Spain (37o24'07''N, 5o35'10''W). The soil at the experimental site was a very fine, montomorillonitic, thermic Chromic Haploxerert (Soil Survey Staff, 2010). A randomized complete block design involving three replications and the following two tillage treatments was performed: (i) Conventional tillage, which involved mouldboard plowing to a depth of 50 cm in the summer (once every three years), followed by field cultivation to a depth of 15 cm before sowing; crop residues being burnt, (ii) No tillage, which involved controlling weeds before sowing by spraying glyphosate and sowing directly into the crop residue from the previous year by using a planter with double-disk openers. For all tillage treatments, the crop rotation (annual crops) consisted of winter wheat, sunflower, and legumes (pea, chickpea, or faba bean, depending on the year), which were grown under rainfed conditions. Enzymatic activities (ß-glucosidase, dehydrogenase, aryl-sulphatase, acid phosphatase, and urease), soil microbial biomass by total viable cells number by acridine orange direct count, the density of cultivable groups of bacteria and fungi by dilution plating on semi-selective media, the physiological profiles of the microbial communities by BiologR, and the

  12. Pedotransfer functions estimating soil hydraulic properties using different soil parameters

    DEFF Research Database (Denmark)

    Børgesen, Christen Duus; Iversen, Bo Vangsø; Jacobsen, Ole Hørbye;

    2008-01-01

    Estimates of soil hydraulic properties using pedotransfer functions (PTF) are useful in many studies such as hydrochemical modelling and soil mapping. The objective of this study was to calibrate and test parametric PTFs that predict soil water retention and unsaturated hydraulic conductivity...... parameters. The PTFs are based on neural networks and the Bootstrap method using different sets of predictors and predict the van Genuchten/Mualem parameters. A Danish soil data set (152 horizons) dominated by sandy and sandy loamy soils was used in the development of PTFs to predict the Mualem hydraulic...... of the hydraulic properties of the studied soils. We found that introducing measured water content as a predictor generally gave lower errors for water retention predictions and higher errors for conductivity predictions. The best of the developed PTFs for predicting hydraulic conductivity was tested against PTFs...

  13. Soil properties from seismic intrinsic dispersion

    NARCIS (Netherlands)

    Zhubayev, A. S.

    2014-01-01

    Theoretical and experimental studies in the past have shown the sensitivity of seismic waves to soil/rock properties, such as composition, porosity, pore fluid, and permeability. However, quantitative characterization of these properties has remained challenging. In case of unconsolidated soils, the

  14. Effect of different soil washing solutions on bioavailability of residual arsenic in soils and soil properties.

    Science.gov (United States)

    Im, Jinwoo; Yang, Kyung; Jho, Eun Hea; Nam, Kyoungphile

    2015-11-01

    The effect of soil washing used for arsenic (As)-contaminated soil remediation on soil properties and bioavailability of residual As in soil is receiving increasing attention due to increasing interest in conserving soil qualities after remediation. This study investigates the effect of different washing solutions on bioavailability of residual As in soils and soil properties after soil washing. Regardless of washing solutions, the sequential extraction revealed that the residual As concentrations and the amount of readily labile As in soils were reduced after soil washing. However, the bioassay tests showed that the washed soils exhibited ecotoxicological effects - lower seed germination, shoot growth, and enzyme activities - and this could largely be attributed to the acidic pH and/or excessive nutrient contents of the washed soils depending on washing solutions. Overall, this study showed that treated soils having lower levels of contaminants could still exhibit toxic effects due to changes in soil properties, which highly depended on washing solutions. This study also emphasizes that data on the As concentrations, the soil properties, and the ecotoxicological effects are necessary to properly manage the washed soils for reuses. The results of this study can, thus, be utilized to select proper post-treatment techniques for the washed soils. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. Microbial effect on soil hydraulic properties

    Science.gov (United States)

    Furman, Alex; Rosenzweig, Ravid; Volk, Elazar; Rosenkranz, Hella; Iden, Sascha; Durner, Wolfgang

    2014-05-01

    Although largely ignored, the soil contains large amount of biofilms (attached microbes) that can affect many processes. While biochemical processes are studied, biophysical processes receive only little attention. Biofilms may occupy some of the pore space, and by that affect the soil hydraulic properties. This effect on unsaturated soils, however, was not intensively studied. In this research we directly measure the hydraulic properties, namely the soil's unsaturated hydraulic conductivity function and retention curve, for soils containing real biofilm. To do that we inoculate soil with biofilm-forming bacteria and incubate it with sufficient amounts of nutrient until biofilm is formed. The hydraulic properties of the incubated soil are then measured using several techniques, including multi-step outflow and evaporation method. The longer measurements (evaporation method) are conducted under refrigeration conditions to minimize microbial activity during the experiment. The results show a clear effect of the biofilm, where the biofilm-affected soil (sandy loam in our case) behaves like a much finer soil. This qualitatively makes sense as the biofilm generates an effective pore size distribution that is characterized by smaller pores. However, the effect is much more complex and needs to be studied carefully considering (for example) dual porosity models. We compare our preliminary results with other experiments, including flow-through column experiments and experiments with biofilm analogues. Clearly a better understanding of the way microbial activity alters the hydraulic properties may help designing more efficient bioremediation, irrigation, and other soil-related processes.

  16. HONO fluxes from soil surfaces: an overview

    Science.gov (United States)

    Wu, Dianming; Sörgel, Matthias; Tamm, Alexandra; Ruckteschler, Nina; Rodriguez-Caballero, Emilio; Cheng, Yafang; Pöschl, Ulrich; Weber, Bettina

    2016-04-01

    Gaseous nitrous acid (HONO) contributes up to 80% of atmospheric hydroxyl (OH) radicals and is also linked to health risks through reactions with tobacco smoke forming carcinogens. Field and modeling results suggested a large unknown HONO source in the troposphere during daytime. By measuring near ground HONO mixing ratio, up to 30% of HONO can be released from forest, rural and urban ground as well as snow surfaces. This source has been proposed to heterogeneous reactions of nitrogen dioxide (NO2) on humic acid surfaces or nitric acid photolysis. Laboratory studies showed that HONO emissions from bulk soil samples can reach 258 ng m-2 s-1 (in term of nitrogen), which corresponding to 1.1 × 1012 molecules cm-2 s-1and ˜ 100 times higher than most of the field studies, as measured by a dynamic chamber system. The potential mechanisms for soil HONO emissions include chemical equilibrium of acid-base reaction and gas-liquid partitioning between soil nitrite and HONO, but the positive correlation of HONO fluxes with pH (largest at neutral and slightly alkaline) points to the dominance of the formation process by ammonia-oxidizing bacteria (AOB). In general soil surface acidity, nitrite concentration and abundance of ammonia-oxidizing bacteria mainly regulate the HONO release from soil. A recent study showed that biological soil crusts in drylands can also emit large quantities of HONO and NO, corresponding to ˜20% of global nitrogen oxide emissions from soils under natural vegetation. Due to large concentrations of microorganisms in biological soil crusts, particularly high HONO and NO emissions were measured after wetting events. Considering large areas of arid and arable lands as well as peatlands, up to 70% of global soils are able to emitting HONO. However, the discrepancy between large soil HONO emissions measured in lab and low contributions of HONO flux from ground surfaces in field as well as the role of microorganisms should be further investigated.

  17. Soil biochemical properties in brown and gray mine soils with and without hydroseeding

    Science.gov (United States)

    Thomas, C.; Sexstone, A.; Skousen, J.

    2015-09-01

    Surface coal mining in the eastern USA disturbs hundreds of hectares of land every year and removes valuable and ecologically diverse eastern deciduous forests. Reclamation involves restoring the landscape to approximate original contour, replacing the topsoil, and revegetating the site with trees and herbaceous species to a designated post-mining land use. Re-establishing an ecosystem of ecological and economic value as well as restoring soil quality on disturbed sites are the goals of land reclamation, and microbial properties of mine soils can be indicators of restoration success. Reforestation plots were constructed in 2007 using weathered brown sandstone or unweathered gray sandstone as topsoil substitutes to evaluate tree growth and soil properties at Arch Coal's Birch River mine in West Virginia, USA. All plots were planted with 12 hardwood tree species and subplots were hydroseeded with a herbaceous seed mix and fertilizer. After 6 years, the average tree volume index was nearly 10 times greater for trees grown in brown (3853 cm3) compared to gray mine soils (407 cm3). Average pH of brown mine soils increased from 4.7 to 5.0, while gray mine soils declined from 7.9 to 7.0. Hydroseeding doubled tree volume index and ground cover on both mine soils. Hydroseeding doubled microbial biomass carbon (MBC) on brown mine soils (8.7 vs. 17.5 mg kg-1), but showed no effect on gray mine soils (13.3 vs. 12.8 mg kg-1). Hydroseeding also increased the ratio of MBC to soil organic C in both soils and more than tripled the ratio for potentially mineralizable nitrogen (PMN) to total N. Brown mine soils were a better growth medium than gray mine soils and hydroseeding was an important component of reclamation due to improved biochemical properties and microbial activity in mine soils.

  18. BIOREMEDIATION OF CONTAMINATED SURFACE SOILS

    Science.gov (United States)

    Biological remediation of soils contaminated with organic chemicals is an alternative treatment technology that can often meet the goal of achieving a permanent clean-up remedy at hazardous waste sites, as encouraged by the U.S. Environmental Protection Agency (U.S. EPA) for impl...

  19. Microwave brightness temperature imaging and dielectric properties of lunar soil

    Indian Academy of Sciences (India)

    Wu Ji; Li Dihui; Zhang Xiaohui; Jiang Jingshan; A T Altyntsev; B I Lubyshev

    2005-12-01

    Among many scientific objectives of lunar exploration, investigations on lunar soil become attractive due to the existence of He3 and ilmenite in the lunar soil and their possible utilization as nuclear fuel for power generation.Although the composition of the lunar surface soil can be determined by optical and /X-ray spectrometers, etc., the evaluation of the total reserves of He3 and ilmenite within the regolith and in the lunar interior are still not available.In this paper,we give a rough analysis of the microwave brightness temperature images of the lunar disc observed using the NRAO 12 meter Telescope and Siberian Solar Radio Telescope.We also present the results of the microwave dielectric properties of terrestrial analogues of lunar soil and,discuss some basic relations between the microwave brightness temperature and lunar soil properties.

  20. Rheological properties of soil: a review

    Science.gov (United States)

    Zhu, Guangli; Zhu, Long; Yu, Chao

    2017-05-01

    Recently rheological methods have been applied to investigate the mechanical properties of soil micro-structure. Rheological techniques have a number of quantitative physically based measurements and offer a better understanding of how soil micro-structure behaves when subject to stress. Rheological material is refers to deformation properties similar to the solid and flow properties similar to the liquid of bound water and colloidal substances under stress. Soil rheology is divided into fluid rheology and plasticity rheology. Fluid rheology is produced by rheological material. Plasticity rheology mainly refers to the sliding and peristaltic between soil solid particles under shear stress. It is generally believed that the soft soil rheology mainly belongs to fluid rheology, while the rheology of sand and other coarse grained soil mainly belongs to plasticity rheology. Thus, rheology mechanisms of soft soil and sand are different. This paper introduces the methods of the research progress on the rheology of soil, in the soil rheological mechanism, rheological model and rheological numerical aspects of the research at home and abroad were summarized and analysed, discussed the problems existed in related research, and puts forward some suggestions for the future study on the rheology of soil.

  1. Tillage Effects on Soil Properties & Respiration

    Science.gov (United States)

    Rusu, Teodor; Bogdan, Ileana; Moraru, Paula; Pop, Adrian; Duda, Bogdan; Cacovean, Horea; Coste, Camelia

    2015-04-01

    Soil tillage systems can be able to influence soil compaction, water dynamics, soil temperature and soil structural condition. These processes can be expressed as changes of soil microbiological activity, soil respiration and sustainability of agriculture. Objectives of this study were: 1) to assess the effects of tillage systems (Conventional System-CS, Minimum Tillage-MT, No-Tillage-NT) on soil compaction, soil temperature, soil moisture and soil respiration and 2) to establish the relationship that exists in changing soil properties. Three treatments were installed: CS-plough + disc; MT-paraplow + rotary grape; NT-direct sowing. The study was conducted on an Argic-Stagnic Faeoziom. The MT and NT applications reduce or completely eliminate the soil mobilization, due to this, soil is compacted in the first year of application. The degree of compaction is directly related to soil type and its state of degradation. The state of soil compaction diminished over time, tending toward a specific type of soil density. Soil moisture was higher in NT and MT at the time of sowing and in the early stages of vegetation and differences diminished over time. Moisture determinations showed statistically significant differences. The MT and NT applications reduced the thermal amplitude in the first 15 cm of soil depth and increased the soil temperature by 0.5-2.20C. The determinations confirm the effect of soil tillage system on soil respiration; the daily average was lower at NT (315-1914 mmoli m-2s-1) and followed by MT (318-2395 mmoli m-2s-1) and is higher in the CS (321-2480 mmol m-2s-1). Comparing with CS, all the two conservation tillage measures decreased soil respiration, with the best effects of no-tillage. An exceeding amount of CO2 produced in the soil and released into the atmosphere, resulting from aerobic processes of mineralization of organic matter (excessive loosening) is considered to be not only a way of increasing the CO2 in the atmosphere, but also a loss of

  2. Streptococcus suis sorption on agricultural soils: role of soil physico-chemical properties.

    Science.gov (United States)

    Zhao, Wenqiang; Liu, Xing; Huang, Qiaoyun; Cai, Peng

    2015-01-01

    Understanding pathogen sorption on natural soil particles is crucial to protect public health from soilborne and waterborne diseases. Sorption of pathogen Streptococcus suis on 10 agricultural soils was examined, and its correlations with soil physico-chemical properties were also elucidated. S. suis sorption isotherms conformed to the linear equation, with partition coefficients (Ks) ranging from 12.7 mL g(-1) to 100.1 mL g(-1). Bacteria were observed to sorb on the external surfaces of soil aggregates by scanning electron microscopy. Using Pearson correlation and linear regression analysis, solution pH was found to have significant negative correlations with Ks. Stepwise multiple regression and path analysis revealed that pH and cation exchange capacity (CEC) were the main factors influencing sorption behaviors. The obtained overall model (Ks=389.6-45.9×pH-1.3×CEC, R(2)=0.943, PKs values. However, the variability in Ks was less dependent on soil organic matter, specific surface area, soil texture and zeta potential, probably due to the internal-surface shielding phenomenon of soil aggregates. Additionally, the sorption trends cannot be interpreted by interaction energy barriers calculated using the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory, suggesting the limits of DLVO theory in describing pathogen sorption on natural soils. Our results also indicated soil pH and CEC should be preferentially considered when modeling S. suis sorption process.

  3. A harmonized vocabulary for soil observed properties

    Science.gov (United States)

    Simons, Bruce; Wilson, Peter; Cox, Simon; Vleeshouer, Jamie

    2014-05-01

    Interoperability of soil data depends on agreements concerning models, schemas and vocabularies. However, observed property terms are often defined during different activities and projects in isolation of one another, resulting in data that has the same scope being represented with different terms, using different formats and formalisms, and published in various access methods. Significantly, many soil property vocabularies conflate multiple concepts in a single term, e.g. quantity kind, units of measure, substance being observed, and procedure. Effectively, this bundles separate information elements into a single slot. We have developed a vocabulary for observed soil properties by adopting and extending a previously defined water quality vocabulary. The observed property model separates the information elements, based on the Open Geospatial Consortium (OGC) Observations & Measurements model and extending the NASA/TopQuadrant 'Quantities, Units, Dimensions and Types' (QUDT) ontology. The imported water quality vocabulary is formalized using the Web Ontology Language (OWL). Key elements are defined as sub-classes or sub-properties of standard Simple Knowledge Organization System (SKOS) elements, allowing use of standard vocabulary interfaces. For the soil observed property vocabulary, terms from QUDT and water quality are used where possible. These are supplemented with additional unit of measure (Unit), observed property (ScaledQuantityKind) and substance being observed (SubstanceOrTaxon) vocabulary entries required for the soil properties. The vocabulary terms have been extracted from the Australian Soil and Land Survey Field Handbook and Australian Soil Information Transfer and Evaluation System (SITES) vocabularies. The vocabulary links any chemical substances to items from the Chemical Entities of Biological Interest (ChEBI) ontology. By formalizing the model for observable properties, and clearly labelling the separate elements, soil property observations may

  4. Improving Estimates of Root-zone Soil Water Content Using Soil Hydrologic Properties and Remotely Sensed Soil Moisture

    Science.gov (United States)

    Baldwin, D. C.; Miller, D. A.; Singha, K.; Davis, K. J.; Smithwick, E. A.

    2013-12-01

    Newly defined relationships between remotely sensed soil moisture and soil hydraulic parameters were used to develop fine-scale (100 m) maps of root-zone soil moisture (RZSM) content at the regional scale on a daily time-step. There are several key outcomes from our research: (1) the first multi-layer regional dataset of soil hydraulic parameters developed from gSSURGO data for hydrologic modeling efforts in the Chequemegon Ecosystem Atmospheric Study (ChEAS) region, (2) the operation and calibration of a new model for estimating soil moisture flow through the root-zone at eddy covariance towers across the U.S. using remotely sensed active and passive soil moisture products, and (3) region-wide maps of estimated root-zone soil moisture content. The project links soil geophysical analytical approaches (pedotransfer functions) to new applications in remote sensing of soil moisture that detect surface moisture (~5 cm depth). We answer two key questions in soil moisture observation and prediction: (1) How do soil hydrologic properties of U.S. soil types quantitatively relate to surface-to-subsurface water loss? And (2) Does incorporation of fine-scale soil hydrologic parameters with remotely sensed soil moisture data provide improved hindcasts of in situ RZSM content? The project meets several critical research needs in estimation of soil moisture from remote sensing. First, soil moisture is known to vary spatially with soil texture and soil hydraulic properties that do not align well with the spatial resolution of current remote sensing products of soil moisture (~ 50 km2). To address this, we leveraged new advances in gridded soil parameter information (gSSURGO) together with existing remotely sensed estimates of surface soil moisture into a newly emerging semi-empirical modeling approach called SMAR (Soil Moisture Analytical Relationship). The SMAR model was calibrated and cross-validated using existing soil moisture data from a portion of AMERIFLUX tower sites and

  5. Thermal properties of degraded lowland peat-moorsh soils

    Science.gov (United States)

    Gnatowski, Tomasz

    2016-04-01

    Soil thermal properties, i.e.: specific heat capacity (c), thermal conductivity (K), volumetric heat capacity (C) govern the thermal environment and heat transport through the soil. Hence the precise knowledge and accurate predictions of these properties for peaty soils with high amount of organic matter are especially important for the proper forecasting of soil temperature and thus it may lead to a better assessment of the greenhouse gas emissions created by microbiological activity of the peatlands. The objective of the study was to develop the predictive models of the selected thermal parameters of peat-moorsh soils in terms of their potential applicability for forecasting changes of soil temperature in degraded ecosystems of the Middle Biebrza River Valley area. Evaluation of the soil thermal properties was conducted for the parameters: specific heat capacity (c), volumetric heat capacities of the dry and saturated soil (Cdry, Csat) and thermal conductivities of the dry and saturated soil (Kdry, Ksat). The thermal parameters were measured using the dual-needle probe (KD2-Pro) on soil samples collected from seven peaty soils, representing total 24 horizons. The surface layers were characterized by different degrees of advancement of soil degradation dependent on intensiveness of the cultivation practises (peaty and humic moorsh). The underlying soil layers contain peat deposits of different botanical composition (peat-moss, sedge-reed, reed and alder) and varying degrees of decomposition of the organic matter, from H1 to H7 (von Post scale). Based on the research results it has been shown that the specific heat capacity of the soils differs depending on the type of soil (type of moorsh and type of peat). The range of changes varied from 1276 J.kg-1.K-1 in the humic moorsh soil to 1944 J.kg-1.K-1 in the low decomposed sedge-moss peat. It has also been stated that in degraded peat soils with the increasing of the ash content in the soil the value of specific heat

  6. Soil biochemical properties after six years in amended brown and gray mine soils in West Virginia

    Science.gov (United States)

    Thomas, C.; Sexstone, A.; Skousen, J.

    2015-06-01

    Surface coal mining in the eastern USA disturbs hundreds of hectares of land every year and removes valuable and ecologically diverse eastern deciduous forests. Reclamation involves restoring the landscape to approximate original contour, replacing the topsoil, and revegetating the site with trees and herbaceous species to a designated post-mining land use. Re-establishing an ecosystem of ecological and economic value as well as restoring soil quality on disturbed sites are the goals of land reclamation, and microbial properties of mine soils can be indicators of restoration success. Reforestation plots were constructed in 2007 using weathered brown sandstone or unweathered gray sandstone as topsoil substitutes to evaluate tree growth and soil properties at Arch Coal's Birch River Mine in West Virginia, USA. All plots were planted with 12 hardwood tree species and subplots were hydroseeded with an herbaceous seed mix and fertilizer. After six years, average tree volume index was nearly ten times greater for trees grown in brown (3853 cm3) compared to gray mine soils (407 cm3). Average pH of brown mine soils increased from 4.7 to 5.0, while gray mine soils declined from 7.9 to 7.0. Hydroseeding doubled tree volume index and ground cover on both mine soils. Hydroseeding doubled microbial biomass carbon (MBC) on brown mine soils (8.7 vs. 17.5 mg kg-1), but showed no effect on gray (13.3 vs. 12.8 mg kg-1). Hydroseeding also increased the ratio of MBC to soil organic C in both soils and more than tripled the ratio for potentially mineralizable nitrogen (PMN) to total N. Brown mine soils were a better growth medium than gray mine soils and hydroseeding was an important component of reclamation due to improved biochemical properties and microbial activity in mine soils.

  7. Mapping specific soil functions based on digital soil property maps

    Science.gov (United States)

    Pásztor, László; Fodor, Nándor; Farkas-Iványi, Kinga; Szabó, József; Bakacsi, Zsófia; Koós, Sándor

    2016-04-01

    Quantification of soil functions and services is a great challenge in itself even if the spatial relevance is supposed to be identified and regionalized. Proxies and indicators are widely used in ecosystem service mapping. Soil services could also be approximated by elementary soil features. One solution is the association of soil types with services as basic principle. Soil property maps however provide quantified spatial information, which could be utilized more versatilely for the spatial inference of soil functions and services. In the frame of the activities referred as "Digital, Optimized, Soil Related Maps and Information in Hungary" (DOSoReMI.hu) numerous soil property maps have been compiled so far with proper DSM techniques partly according to GSM.net specifications, partly by slightly or more strictly changing some of its predefined parameters (depth intervals, pixel size, property etc.). The elaborated maps have been further utilized, since even DOSoReMI.hu was intended to take steps toward the regionalization of higher level soil information (secondary properties, functions, services). In the meantime the recently started AGRAGIS project requested spatial soil related information in order to estimate agri-environmental related impacts of climate change and support the associated vulnerability assessment. One of the most vulnerable services of soils in the context of climate change is their provisioning service. In our work it was approximated by productivity, which was estimated by a sequential scenario based crop modelling. It took into consideration long term (50 years) time series of both measured and predicted climatic parameters as well as accounted for the potential differences in agricultural practice and crop production. The flexible parametrization and multiple results of modelling was then applied for the spatial assessment of sensitivity, vulnerability, exposure and adaptive capacity of soils in the context of the forecasted changes in

  8. Detection and differentiation of pollution in urban surface soils using magnetic properties in arid and semi-arid regions of northwestern China.

    Science.gov (United States)

    Wang, Bo; Xia, Dunsheng; Yu, Ye; Jia, Jia; Xu, Shujing

    2014-01-01

    Increasing urbanization and industrialization over the world has caused many social and environmental problems, one of which drawing particular concern is the soil pollution and its ecological degradation. In this study, the efficiency of magnetic methods for detecting and discriminating contaminates in the arid and semi-arid regions of northwestern China was investigated. Topsoil samples from six typical cities (i.e. Karamay, Urumqi, Lanzhou, Yinchuan, Shizuishan and Wuhai) were collected and a systematic analysis of their magnetic properties was conducted. Results indicate that the topsoil samples from the six cities were all dominated by coarse low-coercivity magnetite. In addition, the average magnetite contents in the soils from Urumqi and Lanzhou were shown to be much higher than those from Karamay, Yinchuan, Shizuishan and Wuhai, and they also have relatively higher χlf and χfd% when compared with cities in eastern China. Moreover, specific and distinctive soil pollution signals were identified at each sampling site using the combined various magnetic data, reflecting distinct sources. Industrial and traffic-derived pollution was dominant in Urumqi and Lanzhou, in Yinchuan industrial progress was observed to be important with some places affected by vehicle emission, while Karamay, Shizuishan and Wuhai were relatively clean. The magnetic properties of these latter three cities are significantly affected by both anthropogenic pollution and local parent materials from the nearby Gobi desert. The differences in magnetic properties of topsoil samples affected by mixed industrial and simplex traffic emissions are not obvious, but significant differences exist in samples affected by simplex industrial/vehicle emissions and domestic pollution. The combined magnetic analyses thus provide a sensitive and powerful tool for classifying samples according to likely sources, and may even provide a valuable diagnostic tool for discriminating among different cities.

  9. Surface properties of HMX crystal

    Science.gov (United States)

    Yee, R. Y.; Adicoff, A.; Dibble, E. J.

    1980-01-01

    The surface properties of Beta-HMX crystals were studied. The surface energies of three principal crystal faces were obtained by measuring contact angles with several reference liquids. The surface energies and polarity of the three crystal faces are found to be different.

  10. Geotechnical properties of Egyptian collapsible soils

    Directory of Open Access Journals (Sweden)

    Khaled E. Gaaver

    2012-09-01

    Full Text Available The risk of constructing structures on collapsible soils presents significant challenges to geotechnical engineers due to sudden reduction in volume upon wetting. Identifying collapsible soils when encountered in the field and taking the needed precautions should substantially reduce the risk of such problems usually reported in buildings and highways. Collapsible soils are those unsaturated soils that can withstand relatively high pressure without showing significant change in volume, however upon wetting; they are susceptible to a large and sudden reduction in volume. Collapsible soils cover significant areas around the world. In Egypt, collapsible soils were observed within the northern portion of the western desert including Borg El-Arab region, and around the city of Cairo in Six-of-October plateau, and Tenth-of-Ramadan city. Settlements associated with development on untreated collapsible soils usually lead to expensive repairs. One method for treating collapsible soils is to densify their structure by compaction. The ongoing study presents the effect of compaction on the geotechnical properties of the collapsible soils. Undisturbed block samples were recovered from test pits at four sites in Borg El-Arab district, located at about 20 km west of the city of Alexandria, Egypt. The samples were tested in both unsoaked and soaked conditions. Influence of water inundation on the geotechnical properties of collapsible soils was demonstrated. A comparative study between natural undisturbed and compacted samples of collapsible soils was performed. An attempt was made to relate the collapse potential to the initial moisture content. An empirical correlation between California Bearing Ratio of the compacted collapsible soils and liquid limit was adopted. The presented simple relationships should enable the geotechnical engineers to estimate the complex parameters of collapsible soils using simple laboratory tests with a reasonable accuracy.

  11. Effects of biochars on hydraulic properties of clayey soil

    Science.gov (United States)

    Zhen, Jingbo; Palladino, Mario; Lazarovitch, Naftali; Bonanomi, Giuliano; Battista Chirico, Giovanni

    2017-04-01

    Biochar has gained popularity as an amendment to improve soil hydraulic properties. Since biochar properties depend on feedstocks and pyrolysis temperatures used for its production, proper selection of biochar type as soil amendment is of great importance for soil hydraulic properties improvement. This study investigated the effects of eight types of biochar on physical and hydraulic properties of clayey soil. Biochars were derived from four different feedstocks (Alfalfa hay, municipal organic waste, corn residues and wood chip) pyrolyzed at two different temperatures (300 and 550 °C). Clayey soil samples were taken from Leone farm (40° 26' 15.31" N, 14° 59' 45.54" E), Italy, and were oven-dried at 105 °C to determine dry bulk density. Biochars were mixed with the clayey soil at 5% by mass. Bulk densities of the mixtures were also determined. Saturated hydraulic conductivities (Ks) of the original clayey soil and corresponding mixtures were measured by means of falling-head method. Soil water retention measurements were conducted for clayey soil and mixtures using suction table apparatus and Richards' plate with the pressure head (h) up to 12000 cm. van Genuchten retention function was selected to evaluate the retention characteristics of clayey soil and mixtures. Available water content (AWC) was calculated by field capacity (h = - 500 cm) minus wilting pointing (h = -12000 cm). The results showed that biochar addition decreased the bulk density of clayey soil. The Ks of clayey soil increased due to the incorporation of biochars except for waste and corn biochars pyrolyzed at 550 °C. AWC of soils mixed with corn biochar pyrolyzed at 300 °C and wood biochar pyrolyzed at 550 °C, increased by 31% and 7%, respectively. Further analysis will be conducted in combination of biochar properties such as specific surface area and total pore volume. Better understanding of biochar impact on clayey soil will be helpful in biochar selection for soil amendment and

  12. Impacts of snow and organic soils parameterization on northern Eurasian soil temperature profiles simulated by the ISBA land surface model

    Science.gov (United States)

    Decharme, Bertrand; Brun, Eric; Boone, Aaron; Delire, Christine; Le Moigne, Patrick; Morin, Samuel

    2016-04-01

    In this study we analyzed how an improved representation of snowpack processes and soil properties in the multilayer snow and soil schemes of the Interaction Soil-Biosphere-Atmosphere (ISBA) land surface model impacts the simulation of soil temperature profiles over northern Eurasian regions. For this purpose, we refine ISBA's snow layering algorithm and propose a parameterization of snow albedo and snow compaction/densification adapted from the detailed Crocus snowpack model. We also include a dependency on soil organic carbon content for ISBA's hydraulic and thermal soil properties. First, changes in the snowpack parameterization are evaluated against snow depth, snow water equivalent, surface albedo, and soil temperature at a 10 cm depth observed at the Col de Porte field site in the French Alps. Next, the new model version including all of the changes is used over northern Eurasia to evaluate the model's ability to simulate the snow depth, the soil temperature profile, and the permafrost characteristics. The results confirm that an adequate simulation of snow layering and snow compaction/densification significantly impacts the snowpack characteristics and the soil temperature profile during winter, while the impact of the more accurate snow albedo computation is dominant during the spring. In summer, the accounting for the effect of soil organic carbon on hydraulic and thermal soil properties improves the simulation of the soil temperature profile. Finally, the results confirm that this last process strongly influences the simulation of the permafrost active layer thickness and its spatial distribution.

  13. Charge Properties and Clay Mineral Composition of Tianbao Mountains Soils

    Institute of Scientific and Technical Information of China (English)

    HEJI-ZHENG; LIXUE-YUAN; 等

    1992-01-01

    The clay mineral association,oxides of clay fraction and surface charge properties of 7 soils,which are developed from granite,located at different altitudesof the Tianbao Mountains were studied.Results indicate that with the increase in altitude,1) the weathering process and desilicification of soil clay minerals became weaker,whereas the leaching depotassication and the formation process of hydroxy-aluminum interlayer got stronger;2)the contents of amorphous and complex aluminum and iron,and the activity of aluminum and iron oxides for soil clay fraction increased;and 3) the amount of variable negarive charge,anion exchange capacity and the values of PZC and PZNC also increased.The activity of aluminum and iron oxides,the accumulation of aluminum,and surface charge characteristics and their relation to clay oxides of the vertical zone soils were observed and recorded.

  14. Sound absorption at the soil surface

    NARCIS (Netherlands)

    Janse, A.R.P.

    1969-01-01

    The properties of a soil structure may be examined in various manners. As well as a study of the stability, a knowledge of the geometry of the volume of air filled pores is often needed. The most common measurements, like those of porosity and flow resistance to gases do not permit a detailed

  15. Relationship Between Soil Properties and Different Fractions of Soil Hg

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Correlation and path analysis methods were used to study the relationship between soil properties and the distribution of different soil Hg fractions with nine representative soils from Chongqing, China. Results showed that clay (< 2 m) could increase water-soluble Hg (r = 0.700*). Soil organic matter (OM) could enhance the increase of elemental Hg (r = 0.674*). The higher the base saturation percentage (BSP), the more the residual Hg (r = 0.684*). Organic Hg, the sum of acid-soluble organic Hg. and alkali-soluble Hg, was positively affected by silt (2~20μm) but negatively affected by pH, with the direct path coefficients amounting to 1.0487 and 0.5121, respectively. The positive effect of OM and negative effect of BSP on organic Hg were the most significant, with the direct path coefficients being 0.7614 and -0.8527, respectively. The indirect effect of clay (< 2 μm) via BSP (path coefficient = 0.4186) was the highest, showing that the real influencing factor in the effect of clay (< 2 μm) on acid-soluble organic Hg was BSP. Since the available Hg fraction, water-soluble Hg, was positively affected by soil clay content, and the quite immobile and not bioavailable residual Hg by soil BSP, suitable reduction of clay content and increase of BSP would be of much help to reduce the Hg availability and Hg activity in Hg-contaminated soils.

  16. Performance of demining sensors and soil properties

    Science.gov (United States)

    Takahashi, Kazunori; Preetz, Holger; Igel, Jan

    2011-06-01

    Metal detector has commonly been used for landmine detection and ground-penetrating radar (GPR) is about to be deployed as dual sensor that is in combination with metal detector. Since both devices employ electromagnetic techniques, they are influenced by magnetic and dielectric properties of soil. To observe the influence, various soil properties as well as their spatial distributions were measured in four types of soil where a field test of metal detectors and GPRs took place. By analyzing soil properties these four types of soil were graded based on the estimated amount of influence on the detection techniques. The classification was compared to the detection performance of devices obtained from the blind test and a clear correlation between the difficulty of soil and the performance was observed; the detection and identification performance were degraded in soils that were classified as problematic. Therefore, it was demonstrated that the performance of metal detector and GPR for landmine detection can qualitatively be assessed by geophysical analyses.

  17. Linking soil and sediment properties for research on biogeochemical cycles

    Science.gov (United States)

    Kuhn, Nikolaus J.

    2013-04-01

    Conventional perspectives on soil erosion include the on-site damage to soil and reductions in crop yield, as well as the resulting off-site effects on water quality, runoff and sediment loads in rivers. Our evolving understanding of the Earth System has added a new dimension to the role of soil erosion within the global geochemical cycles. First, the relevance of soil as a nutrient and Carbon (C) pool was recognized. Initially, the role of soils in the global C cycle was largely considered to be limited to a vertical exchange of greenhouse house gases (GHG) between vegetation, soil and atmosphere and thus mostly studied by soil scientists, plant ecologists and climatologists. Even Critical Zone research focused mostly on weathering and regolith properties and ignored lateral fluxes of dissolved or particulate organic matter. Since the late 1990s, a wider role of soils in biogeochemical cycles has emerged. Recent estimates place the lateral movement of C between soil and sediment pools in terrestrial ecosystems (including rivers and lakes) at approximately 0.6 to 1.5 Gt per year. Some of the eroded C is replaced by photosynthesis from the atmosphere, but at a cost of additional emissions, for example due to fertilizer production. The long-term fate of the eroded and deposited soil organic matter is subject to an open debate and suffers from a lack of reliable spatial information on lateral C fluxes and its subsequent fate in terrestrial ecosystems. The connection between soil C pool, GHG emissions and erosion illustrates the relevance of surface processes for the C fluxes between Earth's spheres. Accordingly, soil is now considered as mobile system to make accurate predictions about the consequences of global change for terrestrial biogeochemical cycles and climate feedbacks. This expanded perspective on soils as dynamic pool of weathering regolith, sediment, nutrients and C at the interface between the geospheres requires the analysis of relevant soil properties

  18. Mechanical properties of stabilized artificial organic soil

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    In order to study the influence of organic matter on the mechanical properties of stabilized soil and the effect of XGL2005 on stabilizing organic soil,unconfined compressive strength tests were carried out.Test results indicated that the strength of stabilized soil decreased in the form of a logarithmic function as the organic matter content increased.In contrast,the strength increased in the form of a power function as the content of the stabilization agent increased.The strength of cement stabilized organic soil was reinforced greatly by adding the stabilizer XGL2005.Based on the law obtained from the test,a strength prediction model was established by regression analysis.The model included the influence of the curing time,the content of the cement,the organic matter content and the stabilization agent on the strength of stabilized soil.

  19. Effective Saturated Hydraulic Conductivity for Representing Field-Scale Infiltration and Surface Soil Moisture in Heterogeneous Unsaturated Soils Subjected to Rainfall Events

    Directory of Open Access Journals (Sweden)

    Richa Ojha

    2017-02-01

    Full Text Available Spatial heterogeneity in soil properties has been a challenge for providing field-scale estimates of infiltration rates and surface soil moisture content over natural fields. In this study, we develop analytical expressions for effective saturated hydraulic conductivity for use with the Green-Ampt model to describe field-scale infiltration rates and evolution of surface soil moisture over unsaturated fields subjected to a rainfall event. The heterogeneity in soil properties is described by a log-normal distribution for surface saturated hydraulic conductivity. Comparisons between field-scale numerical and analytical simulation results for water movement in heterogeneous unsaturated soils show that the proposed expressions reproduce the evolution of surface soil moisture and infiltration rate with time. The analytical expressions hold promise for describing mean field infiltration rates and surface soil moisture evolution at field-scale over sandy loam and loamy sand soils.

  20. Soil moisture sensor calibration for organic soil surface layers

    Directory of Open Access Journals (Sweden)

    S. Bircher

    2015-12-01

    Full Text Available This paper's objective is to present generic calibration functions for organic surface layers derived for the soil moisture sensors Decagon ECH2O 5TE and Delta-T ThetaProbe ML2x, using material from northern regions, mainly from the Finish Meteorological Institute's Arctic Research Center in Sodankylä and the study area of the Danish Center for Hydrology HOBE. For the Decagon 5TE sensor such a function is currently not reported in literature. Data were compared with measurements from underlying mineral soils including laboratory and field measurements. Shrinkage and charring during drying were considered. For both sensors all field and lab data showed consistent trends. For mineral layers with low soil organic matter (SOM content the validity of the manufacturer's calibrations was demonstrated. Deviating sensor outputs in organic and mineral horizons were identified: for the Decagon 5TE apparent relative permittivities at a given moisture content decreased for increased SOM content, which was attributed to an increase of bound water in organic materials with large surface areas compared to the studied mineral soils. ThetaProbe measurements from organic horizons showed stronger non-linearity in the sensor response and signal saturation in the high level data. The derived calibration fit functions between sensor response and volumetric water content hold for samples spanning a wide range of humus types with differing SOM characteristics. This strengthens confidence in their validity under various conditions, rendering them highly suitable for large-scale applications in remote sensing and land surface modeling studies. Agreement between independent Decagon 5TE and ThetaProbe time series from an organic surface layer at the Sodankylä site was significantly improved when the here proposed fit functions were used. Decagon 5TE data also well-reflected precipitation events. Thus, Decagon 5TE network data from organic surface layers at the Sodankyl

  1. Soil moisture sensor calibration for organic soil surface layers

    Science.gov (United States)

    Bircher, Simone; Andreasen, Mie; Vuollet, Johanna; Vehviläinen, Juho; Rautiainen, Kimmo; Jonard, François; Weihermüller, Lutz; Zakharova, Elena; Wigneron, Jean-Pierre; Kerr, Yann H.

    2016-04-01

    This paper's objective is to present generic calibration functions for organic surface layers derived for the soil moisture sensors Decagon ECH2O 5TE and Delta-T ThetaProbe ML2x, using material from northern regions, mainly from the Finnish Meteorological Institute's Arctic Research Center in Sodankylä and the study area of the Danish Center for Hydrology (HOBE). For the Decagon 5TE sensor such a function is currently not reported in the literature. Data were compared with measurements from underlying mineral soils including laboratory and field measurements. Shrinkage and charring during drying were considered. For both sensors all field and lab data showed consistent trends. For mineral layers with low soil organic matter (SOM) content the validity of the manufacturer's calibrations was demonstrated. Deviating sensor outputs in organic and mineral horizons were identified. For the Decagon 5TE, apparent relative permittivities at a given moisture content decreased for increased SOM content, which was attributed to an increase of bound water in organic materials with large specific surface areas compared to the studied mineral soils. ThetaProbe measurements from organic horizons showed stronger nonlinearity in the sensor response and signal saturation in the high-level data. The derived calibration fit functions between sensor response and volumetric water content hold for samples spanning a wide range of humus types with differing SOM characteristics. This strengthens confidence in their validity under various conditions, rendering them highly suitable for large-scale applications in remote sensing and land surface modeling studies. Agreement between independent Decagon 5TE and ThetaProbe time series from an organic surface layer at the Sodankylä site was significantly improved when the here-proposed fit functions were used. Decagon 5TE data also well-reflected precipitation events. Thus, Decagon 5TE network data from organic surface layers at the Sodankylä and

  2. Estimation of Soil Electrical Properties in a Multilayer Earth Model with Boundary Element Formulation

    Directory of Open Access Journals (Sweden)

    T. Islam

    2012-01-01

    Full Text Available This paper presents an efficient model for estimation of soil electric resistivity with depth and layer thickness in a multilayer earth structure. This model is the improvement of conventional two-layer earth model including Wenner resistivity formulations with boundary conditions. Two-layer soil model shows the limitations in specific soil characterizations of different layers with the interrelationships between soil apparent electrical resistivity (ρ and several soil physical or chemical properties. In the multilayer soil model, the soil resistivity and electric potential at any points in multilayer anisotropic soil medium are expressed according to the variation of electric field intensity for geotechnical investigations. For most soils with varying layers, multilayer soil resistivity profile is therefore more suitable to get soil type, bulk density of compacted soil and to detect anomalous materials in soil. A boundary element formulation is implemented to show the multilayer soil model with boundary conditions in soil resistivity estimations. Numerical results of soil resistivity ratio and potential differences for different layers are presented to illustrate the application, accuracy, and efficiency of the proposed model. The nobility of the research is obtaining multilayer soil characterizations through soil electric properties in near surface soil profile.

  3. Effects of tree species on soil properties in a forest of the Northeastern United States

    NARCIS (Netherlands)

    Dijkstra, F.A.

    2001-01-01

    Large differences in soil pH and available Ca in the surface soil exist among tree species growing in a mixed hardwood forest in northwestern Connecticut. The observed association between tree species and specific soil chemical properties within mixed-species stands implies that changes in

  4. Relationships between some soil physical and chemical properties with magnetic properties in different soil moisture regimes in Golestan province

    Directory of Open Access Journals (Sweden)

    M. Valaee

    2016-09-01

    . Otherwise, in arid environment Gypsic, Calcic and Salic horizons were observed in the near of soil surface. Fed and Fed-Feo were the highest in udic and the lowest in udic soil moisture regime, respectively. Moreover, higher soil development because of climate effect leaded to higher amount of pedogenic ferromagnetic minerals, as well as the highest were observed in the Udic regime. Otherwise, in Aquic moisture regime, the lowest value of magnetic susceptibility was obtained because of dissolution of ferromagnetic minerals (magnetite and maghemite under supersaturating condition. In overall, close relationships were observed between soil physical and chemical properties and magnetic measures in various soil moisture regimes.

  5. Spatial characterization of soil properties and influence in soil formation in oak-grassland of Sierra Morena, S Spain

    Science.gov (United States)

    Román-Sánchez, Andrea; Cáceres, Francisco; Pédèches, Remi; Giráldez Cervera, Juan Vicente; Vanwalleghem, Tom

    2016-04-01

    The Mediterranean oak-grassland ecosystem is very important for the rural economy and for the biodiversity of south-western European countries like Spain and Portugal. Nevertheless these ecosystems are not well characterized especially their soils. In this report soil carbon has been evaluated and related to other properties. The principal factors controlling the structure, productivity and evolution of forest ecosystems are bedrock, climate, relief, vegetation and time. Soil carbon has an important influence in the soil and ecosystem structures. The purpose of this study is to determine the relationship between relief, soil properties, spatial distribution of soil carbon and their influence in soil formation and geomorphology. This work is part of another study which aims to elucidate the processes involved in the soil formation and to examine their behaviour on long-term with a modelling. In our study area, located in oak-grassland of Sierra Morena, in Cordoba, S Spain, have been studied 67 points at 6 depths in 262 hectares in order to determine carbon content varying between 0-6%, soil properties such as soil depth between 0-4 m, horizon depth and the rocks amount in surface. The relationship between the soil carbon, soil properties and the relief characteristic like slope, aspect, curvature can shed light the processes that affect the mechanisms of bedrock weathering and their interrelationship with geomorphological processes.

  6. Wetting properties of nanostructured surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Ramos-Canut, S. [Laboratoire de Physique de la Matiere Condensee et Nanostructures (UMR CNRS 5586), Universite Claude Bernard Lyon 1, 69622 Villeurbanne Cedex (France)]. E-mail: ramos@lpmcn.univ-lyon1.fr

    2006-04-15

    Swift heavy ion irradiation is a powerful tool to tailor surfaces under controlled conditions at a nanometric scale. The growing importance of nanostructured surfaces for a wide variety of applications and fundamental investigations is now well established. In this paper I will mainly discuss the interest of such surfaces for investigations concerning solid-liquid interfaces. The role played by topographical defects on wetting properties of solid surfaces, and both the dissipative and the confinement effects on the interface will be demonstrated by simple examples.

  7. Plutonium, (137)Cs and uranium isotopes in Mongolian surface soils.

    Science.gov (United States)

    Hirose, K; Kikawada, Y; Igarashi, Y; Fujiwara, H; Jugder, D; Matsumoto, Y; Oi, T; Nomura, M

    2017-01-01

    Plutonium ((238)Pu and (239,240)Pu), (137)Cs and plutonium activity ratios ((238)Pu/(239,240)Pu) as did uranium isotope ratio ((235)U/(238)U) were measured in surface soil samples collected in southeast Mongolia. The (239,240)Pu and (137)Cs concentrations in Mongolian surface soils (surface soils (0.013-0.06) coincided with that of global fallout. The (235)U/(238)U atom ratios in the surface soil show the natural one. There was a good correlation between the (239,240)Pu and (137)Cs concentrations in the surface soils. We introduce the migration depth to have better understanding of migration behaviors of anthropogenic radionuclides in surface soil. We found a difference of the migration behavior between (239,240)Pu and (137)Cs from (137)Cs/(239,240)Pu - (137)Cs plots for the Mongolian and Tsukuba surface soils; plutonium in surface soil is migrated easier than (137)Cs.

  8. Physical, chemical, and biological properties of soils in the city of Mariupol, Ukraine

    Science.gov (United States)

    Shekhovtseva, O. G.; Mal'tseva, I. A.

    2015-12-01

    Physicochemical and biological properties of urbanized soils in the city of Mariupol have been considered in comparison with the background soils. The parametrical characteristics (abundance and biomass) of soil algal groups, the content of humus, the reaction of soil solution, the content of heavy metals, and the particle size distributions of soils under different anthropogenic impacts have been assessed. The physicochemical properties of soils developing under urboecosystem conditions affect the number of structure-forming species, biomass, and proportions of soil algae. According to the particle size distribution, urban soils are classified among the medium and heavy loamy soils with the predominance of the clay and coarse silt fractions. The fractions of physical clay and clay are of highest importance for the existence of algae. The accumulation of heavy metals in the surface horizons of soils can stimulate or inhibit the development of algae depending on the metal concentration.

  9. Thermal properties of soils: effect of biochar application

    Science.gov (United States)

    Usowicz, Boguslaw; Lukowski, Mateusz; Lipiec, Jerzy

    2014-05-01

    Thermal properties (thermal conductivity, heat capacity and thermal diffusivity) have a significant effect on the soil surface energy partitioning and resulting in the temperature distribution. Thermal properties of soil depend on water content, bulk density and organic matter content. An important source of organic matter is biochar. Biochar as a material is defined as: "charcoal for application as a soil conditioner". Biochar is generally associated with co-produced end products of pyrolysis. Many different materials are used as biomass feedstock for biochar, including wood, crop residues and manures. Additional predictions were done for terra preta soil (also known as "Amazonian dark earth"), high in charcoal content, due to adding a mixture of charcoal, bone, and manure for thousands of years i.e. approximately 10-1,000 times longer than residence times of most soil organic matter. The effect of biochar obtained from the wood biomass and other organic amendments (peat, compost) on soil thermal properties is presented in this paper. The results were compared with wetland soils of different organic matter content. The measurements of the thermal properties at various water contents were performed after incubation, under laboratory conditions using KD2Pro, Decagon Devices. The measured data were compared with predictions made using Usowicz statistical-physical model (Usowicz et al., 2006) for biochar, mineral soil and soil with addition of biochar at various water contents and bulk densities. The model operates statistically by probability of occurrence of contacts between particular fractional compounds. It combines physical properties, specific to particular compounds, into one apparent conductance specific to the mixture. The results revealed that addition of the biochar and other organic amendments into the soil caused considerable reduction of the thermal conductivity and diffusivity. The mineral soil showed the highest thermal conductivity and diffusivity

  10. Chemical, Mineralogical, and Physical Properties of Martian Dust and Soil

    Science.gov (United States)

    Ming, D. W.; Morris, R. V.

    2017-01-01

    Global and regional dust storms on Mars have been observed from Earth-based telescopes, Mars orbiters, and surface rovers and landers. Dust storms can be global and regional. Dust is material that is suspended into the atmosphere by winds and has a particle size of 1-3 micrometer. Planetary scientist refer to loose unconsolidated materials at the surface as "soil." The term ''soil'' is used here to denote any loose, unconsolidated material that can be distinguished from rocks, bedrock, or strongly cohesive sediments. No implication for the presence or absence of organic materials or living matter is intended. Soil contains local and regional materials mixed with the globally distributed dust by aeolian processes. Loose, unconsolidated surface materials (dust and soil) may pose challenges for human exploration on Mars. Dust will no doubt adhere to spacesuits, vehicles, habitats, and other surface systems. What will be the impacts on human activity? The objective of this paper is to review the chemical, mineralogical, and physical properties of the martian dust and soil.

  11. Effect of soil roughness on the inversion of off-ground monostatic GPR signal for noninvasive quantification of soil properties

    NARCIS (Netherlands)

    Lambot, S.; Antoine, M.; Vanclooster, M.; Slob, E.C.

    2006-01-01

    We report on a laboratory experiment that investigates the effect of soil surface roughness on the identification of the soil electromagnetic properties from full-wave inversion of ground-penetrating radar (GPR) data in the frequency domain. The GPR system consists of an ultrawide band stepped-frequ

  12. Surface soil factors and soil characteristics in geo-physical milieu of Kebbi State Nigeria

    Directory of Open Access Journals (Sweden)

    Suleiman Usman

    2016-07-01

    Full Text Available Soil erodibility (K factor is the most important tool for estimation the erosion. The aim of this study Soil factors and surface soil characteristics are important components of agricultural environment. They support surface and subsurface soils to perform many functions to agriculture and economic human developments. Understanding these factors would aid to the recognition of the values that our soil and land offered to humanity. It is therefore, aim of this study to visualise and examine the soil factors and surface soil characteristics in Kebbi State Nigeria. An Integrated Surface Soil Approach (ISSA was used in the classification and description of soil environment in the study region. The factors constituted in the ISSA are important components of soil science that theories and practice(s noted to provide ideas on how soil environment functioned. The results indicate that the surface soil environments around Arewa, Argungu, Augie, Birnin Kebbi and Dandi are physically familiar with the following surface soil characteristics: bad-lands, blown-out-lands, cirque-lands, fertile-lands, gullied-lands, miscellaneous and rock-outcrops.The major soil factors observed hat played an important role in surface soil manipulations and soil formation are alluvial, colluvial, fluvial and lacustrine; ant, earthworms and termite; and various forms of surface relief supported by temperature, rainfall, relative humidity and wind. Overall, the surface soil environment of the region was describe according to their physical appearance into fadama clay soils, fadama clay-loam soils, dryland sandy soils, dryland sandy-loam soils, dryland stony soils and organic-mineral soils.

  13. Forward and inverse models for photon transport in soil-ice mixtures and their application to the problem of retrieving optical properties of planetary surfaces

    Science.gov (United States)

    Picca, Paolo; Furfaro, Roberto; Kargel, Jeffrey; Ganapol, Barry D.

    2008-04-01

    Remote sensing studies are often based on simplified approaches describing the photon transport in absorbing and scattering media. The main purpose of the present paper is to show the potentiality of modeling directly the transport phenomena by mean of linear Boltzmann equation. Some details about the solution method of the integro-differential equation are reported with a collection of results of relevance in planetary study domain. An inverse approach based on artificial neural network is also proposed to retrieve the optical properties of planetary surfaces and its performances are tested in various cases.

  14. STIR Proposal For Research Area 2.1.2 Surface Energy Balance: Transient Soil Density Impacts Land Surface Characteristics and Characterization

    Science.gov (United States)

    2015-12-22

    SECURITY CLASSIFICATION OF: Soil density is commonly treated as static in studies on land surface property dynamics. Magnitudes of errors associated...properties, and ii) evaluate impact of changing soil density on surface energy balance and heat and water transfer. Six soil properties were...ABSTRACT 2. REPORT TYPE 17. LIMITATION OF ABSTRACT 15. NUMBER OF PAGES 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 5c. PROGRAM ELEMENT

  15. Relationship Between Soil Properties and Different Fractions of Soil Hg

    Institute of Scientific and Technical Information of China (English)

    WUHONGTAO; YUGUIFEN; 等

    2001-01-01

    Correlation and path analysis methods were used to study the relationship between soil properties and the distribution of different soil Hg fractions with nine representative soils from Chongqing,China,Results showed that clay(<2m) could increase water-soluble Hg(r=0.700*).Soil organic matter (OM) could enhance the increase of elemental Hg(r=0.674*),The higher the base saturation percentage (BSP) ,the more the residual Hg(R=0.684*) .Organic Hg,the sum of said-soluble organic He and alkali-soluble Hg,was positively affected by silt(2-20μm)but negatively affected by pH,with the direct path coefficients amounting to 1.0487 and 0.5121,respectively .The positive effect of OM and negative effect of BSP on organic Hg were the most significant ,with the direct path coefficients being 0.7614 and -0.8527,respectively. The indirect effect of clay(<2μm) iva BSP (path coefficient=0.4186) was the highest,showing that the real influencing factor in the effect of clay(<2μm) via BSP (path coefficient=0.4186) was the highest,showing that the real influencing factor in the effect of clay(<2μm) on acid-soluble organic Hw was BSP.since the available Hg fraction,water-soluble Hg,was positively affected by soil clay content,and the quite immobile and not bioavailable residual Hg by soil BSP,suitable reduction of clay content and increase of BSP would be of much help to reduce the Hg availability and Hg activity in Hg-contaminated soils.

  16. Magnetic susceptibility properties of polluted soils

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    An investigation of magnetic properties using magnetic susceptibility (X) and frequency-dependent susceptibility (Xfd) was conducted on representative modern pollutants, which include smelted slag dust, automobile exhaust dust and coal ash. Their magnetic susceptibility values are more than 500×10-8 m3/kg, and frequency-dependent susceptibility values less than 3%, indicating that ample ferrimagnetic and scanty superparamagnetic grains occurred in the studied pollutants. Similar to the artificially synthetic polluted soils, the industrially-polluted soils display a negative relationship between magnetic susceptibility and frequency-dependent susceptibility. However, the unpolluted soils, e.g. the Quaternary loess in the Chinese Loess Plateau, show a positive relationship between them. In this note, we propose a convenient and effective approach for identifying the polluted soils.

  17. Effect of soil type and soil management on soil physical, chemical and biological properties in commercial organic olive orchards in Southern Spain

    Science.gov (United States)

    Gomez, Jose Alfonso; Auxiliadora Soriano, Maria; Montes-Borrego, Miguel; Navas, Juan Antonio; Landa, Blanca B.

    2014-05-01

    One of the objectives of organic agriculture is to maintain and improve soil quality, while simultaneously producing an adequate yield. A key element in organic olive production is soil management, which properly implemented can optimize the use of rainfall water enhancing infiltration rates and controlling competition for soil water by weeds. There are different soil management strategies: eg. weed mowing (M), green manure with surface tillage in spring (T), or combination with animal grazing among the trees (G). That variability in soil management combined with the large variability in soil types on which organic olive trees are grown in Southern Spain, difficult the evaluation of the impact of different soil management on soil properties, and yield as well as its interpretation in terms of improvement of soil quality. This communications presents the results and analysis of soil physical, chemical and biological properties on 58 soils in Southern Spain during 2005 and 2006, and analyzed and evaluated in different studies since them. Those 58 soils were sampled in 46 certified commercial organic olive orchards with four soil types as well as 12 undisturbed areas with natural vegetation near the olive orchards. The four soil types considered were Eutric Regosol (RGeu, n= 16), Eutric Cambisol (CMeu, n=16), Calcaric Regosol (RGca, n=13 soils sampled) and Calcic Cambisol (CMcc), and the soil management systems (SMS) include were 10 light tillage (LT), 16 sheep grazing (G), 10 tillage (T), 10 mechanical mowing (M), and 12 undisturbed areas covered by natural vegetation (NV-C and NV-S). Our results indicate that soil management had a significant effect on olive yield as well as on key soil properties. Among these soil properties are physical ones, such as infiltration rate or bulk density, chemical ones, especially organic carbon concentration, and biological ones such as soil microbial respiration and bacterial community composition. Superimpose to that soil

  18. Effect of Soil Washing for Lead and Zinc Removal on Soil Hydraulic Properties

    Science.gov (United States)

    Kammerer, Gerhard; Zupanc, Vesna; Gluhar, Simon; Lestan, Domen

    2017-04-01

    Soil washing as a metal pollution remediation process, especially part with intensive mixing of the soil slurry and soil compression after de-watering, significantly deteriorates physical properties of soil compared to those of non-remediated soil. Furthermore, changed physical characteristics of remediated soil influence interaction of plant roots with soil system and affect soil water regime. Remediated soils showed significant differences to their original state in water retention properties and changed structure due to the influence of artificial structure created during remediation process. Disturbed and undisturbed soil samples of remediated and original soils were analyzed. We evaluated soil hydraulic properties as a possible constraint for re-establishing soil structure and soil fertility after the remediation procedure.

  19. Scaling hydraulic properties of a macroporous soil

    Science.gov (United States)

    Mohanty, Binayak P.

    1999-06-01

    Macroporous soils exhibit significant differences in their hydraulic properties for different pore domains. Multimodal hydraulic functions may be used to describe the characteristics of multiporosity media. I investigated the usefulness of scaling to describe the spatial variability of hydraulic conductivity (K(-h)) functions of a macroporous soil in Las Nutrias, New Mexico. Piecewise-continuous hydraulic conductivity functions suitable for macroporous soils in conjunction with a hybrid similar media-functional normalization scaling approach were used. Results showed that gravity-dominated flow and the related hydraulic conductivity (K(minus;h) functions of the macropore region are more readily scalable than capillary-dominated flow properties of the mesopore and micropore regions. A possible reason for this behavior is that gravity-dominated flow in the larger pores is mostly influenced by the pore diameter which remains more uniform as compared to tortuous mesopores and micropores with variable neck and body sizes along the pore length.

  20. Spectral estimation of soil properties in siberian tundra soils and relations with plant species composition

    DEFF Research Database (Denmark)

    Bartholomeus, Harm; Schaepman-Strub, Gabriela; Blok, Daan

    2012-01-01

    yields a good prediction model for K and a moderate model for pH. Using these models, soil properties are determined for a larger number of samples, and soil properties are related to plant species composition. This analysis shows that variation of soil properties is large within vegetation classes...... will significantly impact the global carbon cycle. We explore the potential of soil spectroscopy to estimate soil carbon properties and investigate the relation between soil properties and vegetation composition. Soil samples are collected in Siberia, and vegetation descriptions are made at each sample point. First...

  1. Variations in soil detachment rates after wildfire as a function of soil depth, flow properties, and root properties

    Science.gov (United States)

    Moody, John A.; Nyman, Peter

    2013-01-01

    Wildfire affects hillslope erosion through increased surface runoff and increased sediment availability, both of which contribute to large post-fire erosion events. Relations between soil detachment rate, soil depth, flow and root properties, and fire impacts are poorly understood and not represented explicitly in commonly used post-fire erosion models. Detachment rates were measured on intact soil cores using a modified tilting flume. The cores were mounted flush with the flume-bed and a measurement was made on the surface of the core. The core was extruded upward, cut off, and another measurement was repeated at a different depth below the original surface of the core. Intact cores were collected from one site burned by the 2010 Fourmile Canyon (FMC) fire in Colorado and from one site burned by the 2010 Pozo fire in California. Each site contained contrasting vegetation and soil types. Additional soil samples were collected alongside the intact cores and were analyzed in the laboratory for soil properties (organic matter, bulk density, particle-size distribution) and for root properties (root density and root-length density). Particle-size distribution and root properties were different between sites, but sites were similar in terms of bulk density and organic matter. Soil detachment rates had similar relations with non-uniform shear stress and non-uniform unit stream power. Detachment rates within single sampling units displayed a relatively weak and inconsistent relation to flow variables. When averaged across all clusters, the detachment rate displayed a linear relation to shear stress, but variability in soil properties meant that the shear stress accounted for only a small proportion of the overall variability in detachment rates (R2 = 0.23; R2 is the coefficient of determination). Detachment rate was related to root-length density in some clusters (R2 values up to 0.91) and unrelated in others (R2 values 2 value improved and the range of exponents became

  2. Soil hydraulic parameters and surface soil moisture of a tilled bare soil plot inversely derived from l-band brightness temperatures

    KAUST Repository

    Dimitrov, Marin

    2014-01-01

    We coupled a radiative transfer model and a soil hydrologic model (HYDRUS 1D) with an optimization routine to derive soil hydraulic parameters, surface roughness, and soil moisture of a tilled bare soil plot using measured brightness temperatures at 1.4 GHz (L-band), rainfall, and potential soil evaporation. The robustness of the approach was evaluated using five 28-d data sets representing different meteorological conditions. We considered two soil hydraulic property models: the unimodal Mualem-van Genuchten and the bimodal model of Durner. Microwave radiative transfer was modeled by three different approaches: the Fresnel equation with depth-averaged dielectric permittivity of either 2-or 5-cm-thick surface layers and a coherent radiative transfer model (CRTM) that accounts for vertical gradients in dielectric permittivity. Brightness temperatures simulated by the CRTM and the 2-cm-layer Fresnel model fitted well to the measured ones. L-band brightness temperatures are therefore related to the dielectric permittivity and soil moisture in a 2-cm-thick surface layer. The surface roughness parameter that was derived from brightness temperatures using inverse modeling was similar to direct estimates from laser profiler measurements. The laboratory-derived water retention curve was bimodal and could be retrieved consistently for the different periods from brightness temperatures using inverse modeling. A unimodal soil hydraulic property function underestimated the hydraulic conductivity near saturation. Surface soil moisture contents simulated using retrieved soil hydraulic parameters were compared with in situ measurements. Depth-specific calibration relations were essential to derive soil moisture from near-surface installed sensors. © Soil Science Society of America 5585 Guilford Rd., Madison, WI 53711 USA.

  3. Adsorption properties of subtropical and tropical variable charge soils: Implications from climate change and biochar amendment

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Ren-Kou; Qafoku, Nikolla; Van Ranst, Eric; Li, Jiu-yu; Jiang, Jun

    2016-01-25

    This review paper attempts to summarize the progress made in research efforts conducted over the last years to study the surface chemical properties of the tropical and subtropical soils, usually called variable charge soils, and the way they response to different management practices. The paper is composed of an introductory section that provides a brief discussion on the surface chemical properties of these soils, and five other review sections. The focus of these sections is on the evolution of surface chemical properties during the development of the variable charge properties (second section), interactions between oppositely charged particles and the resulting effects on the soil properties and especially on soil acidity (third section), the surface effects of low molecular weight organic acids sorbed to mineral surfaces and the chemical behavior of aluminum (fourth section), and the crop straw derived biochar induced changes of the surface chemical properties of these soils (fifth section). A discussion on the effect of climate change variables on the properties of the variable charge soils is included at the end of this review paper (sixth section).

  4. Predicting Soil-Air and Soil-Water Transport Properties During Soil Vapor Extraction

    DEFF Research Database (Denmark)

    Poulsen, Tjalfe

    designing and operating remediation systems. Simple and accurate models for estimating soil properties from soil parameters that are easy to measure are useful in connection with preliminary remedial investigations and evaluation of remedial technologies. In this work simple models for predicting transport...

  5. Photodegradation of pesticides on plant and soil surfaces.

    Science.gov (United States)

    Katagi, Toshiyuki

    2004-01-01

    Photodegradation is an abiotic process in the dissipation of pesticides where molecular excitation by absorption of light energy results in various organic reactions, or reactive oxygen species such as OH*, O3, and 1O2 specifically or nonspecifically oxidize the functional groups in a pesticide molecule. In the case of soil photolysis, the heterogeneity of soil together with soil properties varying with meteorological conditions makes photolytic processes difficult to understand. In contrast to solution photolysis, where light is attenuated by solid particles, both absorption and emission profiles of a pesticide are modified through interaction with soil components such as adsorption to clay minerals or solubilization to humic substances. Diffusion of a pesticide molecule results in heterogeneous concentration in soil, and either steric constraint or photoinduced generation of reactive species under the limited mobility sometimes modifies degradation mechanisms. Extensive investigations of meteorological effects on soil moisture and temperature as well as development of an elaborate testing chamber controlling these factors seems to provide better conditions for researchers to examine the photodegradation of pesticides on soil under conditions similar to the real environment. However, the mechanistic analysis of photodegradation has just begun, and there still remain many issues to be clarified. For example, how photoprocesses affect the electronic states of pesticide molecules on soil or how the reactive oxygen species are generated on soil via interaction with clay minerals and humic substances should be investigated in greater detail. From this standpoint, the application of diffuse reflectance spectroscopy and usage or development of various probes to trap intermediate species is highly desired. Furthermore, only limited information is yet available on the reactions of pesticides on soil with atmospheric chemical species. For photodegradation on plants, the

  6. IMPACT OF MARBLE MINING ON SOIL PROPERTIES IN A PART ...

    African Journals Online (AJOL)

    Dr Osondu

    The effects of marble mining activities on the properties of soils of Igbeti marble area, ... occur in soil and plant as divalent cations, Ca2+ and .... The data from soil analyses of the sampled plots .... Agboola, A.A. (1982), Soil testing, soil fertilizer.

  7. Determining soil moisture and soil properties in vegetated areas by assimilating soil temperatures

    Science.gov (United States)

    Dong, Jianzhi; Steele-Dunne, Susan C.; Ochsner, Tyson E.; van de Giesen, Nick

    2016-06-01

    This study addresses two critical barriers to the use of Passive Distributed Temperature Sensing (DTS) for large-scale, high-resolution monitoring of soil moisture. In recent research, a particle batch smoother (PBS) was developed to assimilate sequences of temperature data at two depths into Hydrus-1D to estimate soil moisture as well as soil thermal and hydraulic properties. However, this approach was limited to bare soil and assumed that the cable depths were perfectly known. In order for Passive DTS to be more broadly applicable as a soil hydrology research and remote sensing soil moisture product validation tool, it must be applicable in vegetated areas. To address this first limitation, the forward model (Hydrus-1D) was improved through the inclusion of a canopy energy balance scheme. Synthetic tests were used to demonstrate that without the canopy energy balance scheme, the PBS estimated soil moisture could be even worse than the open loop case (no assimilation). When the improved Hydrus-1D model was used as the forward model in the PBS, vegetation impacts on the soil heat and water transfer were well accounted for. This led to accurate and robust estimates of soil moisture and soil properties. The second limitation is that, cable depths can be highly uncertain in DTS installations. As Passive DTS uses the downward propagation of heat to extract moisture-related variations in thermal properties, accurate estimates of cable depths are essential. Here synthetic tests were used to demonstrate that observation depths can be jointly estimated with other model states and parameters. The state and parameter results were only slightly poorer than those obtained when the cable depths were perfectly known. Finally, in situ temperature data from four soil profiles with different, but known, soil textures were used to test the proposed approach. Results show good agreement between the observed and estimated soil moisture, hydraulic properties, thermal properties, and

  8. Remote Sensing and Synchronous Land Surface Measurements of Soil Moisture and Soil Temperature in the Field

    Science.gov (United States)

    Kolev, N. V.; Penev, K. P.; Kirkova, Y. M.; Krustanov, B. S.; Nazarsky, T. G.; Dimitrov, G. K.; Levchev, C. P.; Prodanov, H. I.; Kraleva, L. H.

    1998-01-01

    The paper presents the results of remote sensing and synchronous land surface measurements for estimation of soil (surface and profile) water content and soil temperature for different soil types in Bulgaria. The relationship between radiometric temperature and soil surface water content is shown. The research is illustrated by some results from aircraft and land surface measurements carried out over three test areas near Pleven, Sofia and Plovdiv, respectively, during the period 1988-1990.

  9. OF INERTIAL PROPERTIES OF SOILS

    Directory of Open Access Journals (Sweden)

    Sargsjan Akop Egishovich

    2012-10-01

    The article describes the motion of the construction foundation slab as a rigid body with six degrees of freedom on the surface of the inertial linearly deformable semi-space. The dynamic mechanical model of the base is presented as six pairs of parallel-connected springs and dampers that characterize the rigidity of the base subjected to ultimate forces (three forces alongside the axes and three moments in relation to the axes.

  10. Intra-rainfall soil surface change detection using close-range photogrammetry

    Science.gov (United States)

    Bauer, Thomas; James, Michael R.; McShane, Gareth; Quinton, John N.; Strauss, Peter

    2015-04-01

    During precipitation events, the physical properties of soil surfaces change significantly. Such changes influence a large range of processes, e.g. surface runoff, soil erosion, water infiltration, soil-atmosphere interactions and plant growth. It has been proven that successive precipitation events change soil surfaces, but detailed studies on soil surface change within a single rainfall event do, to the best of our knowledge, not exist, due to a lack of suitable methods. However, recent developments in the use of photogrammetry are becoming a common tool in geoscience and can be utilized in soil surface detection. New concepts, developments in hardware and software allow a quick and user friendly calculation of surface models with close-range imagery and processing based on structure from motion (SfM) approaches. In this study we tested the potential of close range photogrammetry for detecting changes in soil surface topography within an artificial rainfall event. We used a photogrammetric approach to capture multiple images of the soil surface on two different soil types (loamy and sandy soil) under laboratory conditions while they were exposed to a 60 minute duration 47(60) mm hr-1 intensity rainfall event from a gravity driven rainfall simulator. The photographs were processed using Photoscan to produce point clouds which were then interpolated to produce DEM surfaces. Of the 126 surfaces produced during the rainfall event 125 were usable and able to demonstrate changes with a resolution of photogrammetry for surface detection within a precipitation event. The use of close-range photogrammetry opens new possibilities to monitor soil surfaces and could be developed for a range of other applications. Our results have the potential to lead to better understanding of infiltration, runoff, nutrient transport and soil erosion processes within precipitation event.

  11. Effects of environmental factors and soil properties on topographic variations of soil respiration

    Directory of Open Access Journals (Sweden)

    K. Tamai

    2010-03-01

    Full Text Available Soil respiration rates were measured along different parts of a slope in (a an evergreen forest with common brown forest soil and (b a deciduous forest with immature soil. The effects of soil temperature, soil moisture and soil properties were estimated individually, and the magnitudes of these effects in the deciduous and evergreen forests were compared. In the evergreen forest with common brown forest soil, soil properties had the greatest effect on soil respiration rates, followed by soil moisture and soil temperature. These results may be explained by the fact that different soil properties matured within different environments. It can be argued that the low soil respiration rates in the low parts of the slope in the evergreen forest resulted from soil properties and not from wet soil conditions. In the deciduous forest, soil respiration rates were more strongly affected by soil moisture and soil temperature than by soil properties. These effects were likely due to the immaturity of the forest soil.

  12. Effects of olive mill wastes added to olive grove soils on erosion and soil properties

    Science.gov (United States)

    Lozano-García, Beatriz; Parras-Alcántara, Luis

    2014-05-01

    ha-1 in CTa and 136.3 Mg ha-1 in CTol; and the TN stock 12.1, 13.9 and 16.1 Mg ha-1 in CT, CTa and CTol, respectively. In addition, both oil mill wastes contributed to delay runoff generation and erosion, enhancing the infiltration of rainwater. Furthermore, application of the wastes improved soil quality (SRs of SOC were greater than 2). So the addition of these oil mill wastes to agricultural soils has become a viable solution to their disposal; not only do they enrich deficient soils with organic matter, but also improve their physical and chemical properties, even decrease soil erosion, especially olive leaves. REFERENCES Lozano-García, B., Parras-Alcántara, L., del Toro, M., 2011. The effects of agricultural management with oil mill by-products on surface soil properties, runoff and soil losses in southern Spain. Catena 85, 187-193. Lozano-García, B., Parras-Alcántara, L., 2013. Short-term effects of olive mill by-products on soil organic carbon, total N, C:N ratio and stratification ratios in a Mediterranean olive grove. Agriculture Ecosystem and Environment 165, 68-73.

  13. Temporal Dynamics of Soil Moisture Variability at the Landscape Scale: Implications for Land Surface Models.

    Science.gov (United States)

    Montaldo, N.; Albertson, J. D.

    2001-12-01

    Meteorological and hydrological forecasting models share soil moisture as a critical boundary condition. Partitioning of received energy at the land surface depends directly on this variable, as does the partitioning of rainfall into its possible routes over and through the soil. In Land Surface Models (LSMs) the temporal dynamic of soil moisture spatial variability is a fundamental issue in large-scale flux predictions. From remote sensing observations soil moisture values are averaged in the horizontal over rather large regions (pixels). The averaging areas will be getting even larger as we move from aircraft mounted sensors to satellite mounting. These data are to be used ultimately to estimate spatial averages of other processes that depend on soil moisture, such as, runoff generation, drainage, evaporation, sensible heat fluxes, crop yield, microbial activity, etc. Consequently, the LSMs have to predict spatial averaged flux over large region from average values of the soil moisture. But soil moisture variances affect flux predictions, which depend nonlinearly on soil moisture, because many of the other processes possess distinct threshold aspects to their nonlinear dependence on soil moisture. Through application of well-developed Reynolds averaging rules from fluid mechanics to the equation of Richards and Darcy-Buckingham, we write a conservation equation for the horizontal variance of soil moisture. And, through closure arguments, we are able to describe the individual terms that produce and destroy spatial variance through time in terms of the mean soil moisture state and other observable system properties such as vegetation and soil properties variability. Finally, we calculate land surface fluxes from second order Taylor expansion, using our soil moisture variance closure model, and the other observable system properties. In this work, we demonstrate significant improvements in land surface large-scale flux predictions using the proposed soil moisture

  14. Temporal Dynamics of Soil Moisture Variability: Implications For Land Surface Models

    Science.gov (United States)

    Montaldo, N.; Albertson, J. D.

    Meteorological and hydrological forecasting models share soil moisture as a critical boundary condition. Partitioning of received energy at the land surface depends di- rectly on this variable, as does the partitioning of rainfall into its possible routes over and through the soil. In Land Surface Models (LSMs) the temporal dynamic of soil moisture spatial variability is a fundamental issue in large-scale flux predictions. From remote sensing observations soil moisture values are averaged in the horizontal over rather large regions (pixels). The averaging areas will be getting even larger as we move from aircraft mounted sensors to satellite mounting. These data are to be used ultimately to estimate spatial averages of other processes that depend on soil moisture, such as, runoff generation, drainage, evaporation, sensible heat fluxes, crop yield, mi- crobial activity, etc. Consequently, the LSMs have to predict spatial averaged flux over large region from average values of the soil moisture. But soil moisture variances af- fect flux predictions, which depend nonlinearly on soil moisture, because many of the other processes possess distinct threshold aspects to their nonlinear dependence on soil moisture. Through application of well-developed Reynolds averaging rules from fluid mechanics to the equation of Richards and Darcy-Buckingham, we write a con- servation equation for the horizontal variance of soil moisture. And, through closure arguments, we are able to describe the individual terms that produce and destroy spa- tial variance through time in terms of the mean soil moisture state and other observable system properties such as vegetation and soil properties variability. Finally, we calcu- late land surface fluxes from second order Taylor expansion, using our soil moisture variance closure model, and the other observable system properties. In this work, we demonstrate significant improvements in land surface large-scale flux predictions us- ing the proposed

  15. Towards soil property retrieval from space: Proof of concept using in situ observations

    Science.gov (United States)

    Bandara, Ranmalee; Walker, Jeffrey P.; Rüdiger, Christoph

    2014-05-01

    Soil moisture is a key variable that controls the exchange of water and energy fluxes between the land surface and the atmosphere. However, the temporal evolution of soil moisture is neither easy to measure nor monitor at large scales because of its high spatial variability. This is mainly a result of the local variation in soil properties and vegetation cover. Thus, land surface models are normally used to predict the evolution of soil moisture and yet, despite their importance, these models are based on low-resolution soil property information or typical values. Therefore, the availability of more accurate and detailed soil parameter data than are currently available is vital, if regional or global soil moisture predictions are to be made with the accuracy required for environmental applications. The proposed solution is to estimate the soil hydraulic properties via model calibration to remotely sensed soil moisture observation, with in situ observations used as a proxy in this proof of concept study. Consequently, the feasibility is assessed, and the level of accuracy that can be expected determined, for soil hydraulic property estimation of duplex soil profiles in a semi-arid environment using near-surface soil moisture observations under naturally occurring conditions. The retrieved soil hydraulic parameters were then assessed by their reliability to predict the root zone soil moisture using the Joint UK Land Environment Simulator model. When using parameters that were retrieved using soil moisture observations, the root zone soil moisture was predicted to within an accuracy of 0.04 m3/m3, which is an improvement of ∼0.025 m3/m3 on predictions that used published values or pedo-transfer functions.

  16. Relationship between Mineral Soil Surface Area and the Biological Degradation of Biosolids Added to Soil

    Directory of Open Access Journals (Sweden)

    Dongqi Wen

    2015-12-01

    Full Text Available Geochemical and biological processes that operate in the soil matrix and on the soil surface are important to the degradation of biosolids in soil. Due to the large surface area of soils it is assumed that the microbial ecology is associated with mineral soil surface area. The total mineral surface areas were determined for soils from eight different fields selected from a long term study (1972–2006 of annual biosolids application to 41 fields in central Illinois varying in size from 3.6 to 66 ha. The surface areas for the soils varied from 1 to 9 m2/g of soil. The biological degradation rates for the eight soils were determined using a biological degradation rate model (DRM and varied from 0.02 to 0.20/year−1. Regression analysis revealed that the degradation rate was positively associated with mineral soil surface area (1 m2/g produces 0.018 year−1 increase in the degradation rate. The annual soil sequestration rate was calculated to increase from 1% to 6% when the soil total surface area increased from 1 to 9 m2/g of soil. Therefore, land application of biosolids is an effective way to enhance carbon sequestration in soils and reduce greenhouse gas emissions.

  17. EFFECT OF ELECTRIC FERTILIZER ON SOIL PROPERTIES

    Institute of Scientific and Technical Information of China (English)

    WANG Ya-qin; WANG Ji-hong

    2004-01-01

    Electric fertilizer, I. E. Exerting electric field on plants during growing season instead of chemical fertilizer, is a kind of physical fertilizer, and the third kind of fertilizer with developmental prospect after inorganic fertilizer and organic fertilizer. For the purpose of studying the changes of physical and chemical properties of soil after exerting electric field, five treatments with different applications of chemical fertilizer were arranged on the black soil in Yushu City of Jilin Province by randomized block method, and electric field was exerted on plants every ten days during the growing season. Through sample analysis the paper arrives at following conclusions: 1) Exerting electric field can make soil's granular structure increase, bulk density decrease, moisture capacity increase,thus improving the perviousness of soil. 2) Exerting electric field can make microorganism's number increase and activity strengthen, thus activating nutrient and increasing organic matter content. 3) Exerting electric field with 0.1A medium has the best effect. So the chemical fertilizer can be saved. Therefore, we can say that the application of electric fertilizer is favorable for decreasing chemical poison, improving soil, relaxing the contradiction between the supply and demand of chemical fertilizer, and decreasing production cost of agriculture and forestry.

  18. Geotehnical Properties of Plastic Stabilized Lateritic Soil

    Directory of Open Access Journals (Sweden)

    Akinola Johnson Olarewaju

    2016-09-01

    Full Text Available Stabilization is the combination of soils and additives to change its properties and remain in its stable compacted state without undergoing any change under effect of exposure to weather and traffic. Soil stabilization through the reinforced soil construction is an efficient and reliable technique for improving the strength and stability of soils. The lateritic soil used in this study was taken along Papa-Ilaro road Ajegunle at Abalabi, Ogun State, Nigeria and the solid plastic wastes were taken from different locations in Ilaro. The plastics were grounded into pellets and substituted with laterite at 10%, 15%, 20%, 25% and 30% for compaction test and at 5%, 10%, 15%, 20%, 25% and 30% for California bearing ration (CBR test. The tests conducted in line with BS 1377 (1990 are the specific gravity, compaction and CBR. From the results, it was also observed that plastic pellets reduce the bulk densities and dry densities in the same proportion as the percentage water content increases. From the results, it is hereby suggested that plastic pellets could be mixed with lateritic material around underground pipes to mitigate the effects of accidental explosions. Consequently, environmental risk and hazards caused by plastic wastes and accidental explosions could be greatly reduced.

  19. Novel evaporation experiment to determine soil hydraulic properties

    Directory of Open Access Journals (Sweden)

    K. Schneider

    2006-01-01

    Full Text Available A novel experimental approach to determine soil hydraulic material properties for the dry and very dry range is presented. Evaporation from the surface of a soil column is controlled by a constant flux of preconditioned air and the resulting vapour flux is measured by infrared absorption spectroscopy. The data are inverted under the assumptions that (i the simultaneous movement of water in the liquid and vapour is represented by Richards' equation with an effective hydraulic conductivity and that (ii the coupling between the soil and the well-mixed atmosphere can be modelled by a boundary layer with a constant transfer resistance. The optimised model fits the data exceptionally well. Remaining deviations during the initial phase of an experiment are thought to be well-understood and are attributed to the onset of the heat flow through the column which compensates the latent heat of evaporation.

  20. Exploring functional relationships between post-fire soil water repellency, soil structure and physico-chemical properties

    Science.gov (United States)

    Quarfeld, Jamie; Brook, Anna; Keestra, Saskia; Wittenberg, Lea

    2016-04-01

    Soil water repellency (WR) and aggregate stability (AS) are two soil properties that are typically modified after burning and impose significant influence on subsequent hydrological and geomorphological dynamics. The response of AS and soil WR to fire depends upon how fire has influenced other key soil properties (e.g. soil OM, mineralogy). Meanwhile, routine thinning of trees and woody vegetation may alter soil properties (e.g. structure and porosity, wettability) by use of heavy machinery and species selection. The study area is situated along a north-facing slope of Mount Carmel national park (Israel). The selected sites are presented as a continuum of management intensity and fire histories. To date, the natural baseline of soil WR has yet to be thoroughly assessed and must be investigated alongside associated soil aggregating parameters in order to understand its overall impact. This study examines (i) the natural baseline of soil WR and physical properties compared to those of disturbed sites in the immediate (controlled burn) and long-term (10-years), and (ii) the interactions of soil properties with different control factors (management, surface cover, seasonal-temporal, burn temperature, soil organic carbon (OC) and mineralogy) in Mediterranean calcareous soils. Analysis of surface soil samples before and after destruction of WR by heating (200-600°C) was implemented using a combination of traditional methods and infrared (IR) spectroscopy. Management and surface cover type conditioned the wettability, soil structure and porosity of soils in the field, although this largely did not affect the heat-induced changes observed in the lab. A positive correlation was observed along an increasing temperature gradient, with relative maxima of MWD and BD reached by most soils at the threshold of 400-500°C. Preliminary analyses of soil OC (MIR) and mineralogical composition (VIS-NIR) support existing research regarding: (i) the importance of soil OC quality and

  1. Divergent surface and total soil moisture projections under global warming

    Science.gov (United States)

    Berg, Alexis; Sheffield, Justin; Milly, Paul C.D.

    2017-01-01

    Land aridity has been projected to increase with global warming. Such projections are mostly based on off-line aridity and drought metrics applied to climate model outputs but also are supported by climate-model projections of decreased surface soil moisture. Here we comprehensively analyze soil moisture projections from the Coupled Model Intercomparison Project phase 5, including surface, total, and layer-by-layer soil moisture. We identify a robust vertical gradient of projected mean soil moisture changes, with more negative changes near the surface. Some regions of the northern middle to high latitudes exhibit negative annual surface changes but positive total changes. We interpret this behavior in the context of seasonal changes in the surface water budget. This vertical pattern implies that the extensive drying predicted by off-line drought metrics, while consistent with the projected decline in surface soil moisture, will tend to overestimate (negatively) changes in total soil water availability.

  2. Organic Carbon Influences on Soil Particle Density and Rheological Properties

    Energy Technology Data Exchange (ETDEWEB)

    Blanco-Canqui, H; Lal, Rattan; Post, W M.; Izaurralde, R Cesar C.; Shipitalo, M. J.

    2006-07-01

    Soil particle density (rs) is not routinely measured and is assumed to range between 2.60 and 2.70 Mgm23 or to be a constant (2.65 Mgm23) when estimating essential properties such as porosity, and volumetric water and air relations. Values of rs for the same soil may, however, differ significantly from the standard range due to management induced changes in soil organic carbon (SOC) concentrations. We quantified the rs and Atterberg limits of a Rayne silt loam for five long-term (.22 yr) moldboard-plowed continuous corn (Zea mays L.; MP), no-till continuous corn (NT), no-till continuous corn with beef cattle manure (NTm), pasture, and forest systems.We also assessed the relationships of SOC concentration with rs and the Atterberg limits and the impact of rs on soil porosity. Mean rs across NT, NTm, and pasture (2.35 Mg m23) was |7% lower than that for MP in the 0- to 10-cm soil depth (2.52 Mg m23, P , 0.01). Forest had the lowest rs of all soils (1.79 Mg m23). The NTm caused a greater reduction in rs and a greater increase in SOC concentration, liquid limit (LL), plastic limit (PL), and plasticity index (PI) than NT. Surface soils under MP had the highest rs and rb and the lowest SOC concentration, LL, PL, and PI. The SOC concentration was correlated negatively with rs (r 2 5 0.75) and positively with Atterberg limits (r 2 . 0.64) at .20-cm depth. Estimates of soil porosity for NT, NTm, and pasture using the constant rs overestimated the ''true'' porosity by 12% relative to that using the measured rs.

  3. Reconstruction of ploughed soil surface with 3D fractal interpolation

    NARCIS (Netherlands)

    Liu, Y.; Lu, Z.; Hoogmoed, W.B.; Li, X.

    2014-01-01

    By using a laser profiler, the roughness of ploughed soil surface was obtained. 3D fractal interpolation method was used to interpolate several kinds of reduced measured surface data which were reduced from the original measured ploughed soil surface elevation data in different reduction rates. Also

  4. Remote assessment of the degree of soil degradation from radiation properties of soils

    Science.gov (United States)

    Romanov, A. N.

    2009-03-01

    The effect of the water and salt contents, the soil texture, and the groundwater level on the radiation properties of soils was studied. A methodology was developed for the remote assessment of the degree of soil degradation on the basis of measuring the brightness temperature and emissivity of soils in the microwave region. Criteria based on the remote measurements of radiation parameters of soils for recording changes in the water-physical and other properties of soils, which are necessary for detecting degradation processes at early stages, were substantiated. For the remote assessment of soil degradation, it was proposed to analyze trends in changes with time concerning the emissivities of unfrozen soils occurring at a positive temperature (depending on the soil water content and the groundwater level), the emissivities of frozen nonsaline soils (depending on the soil texture and thermodynamic temperature), and the brightness temperature (depending on the soil salinity and thermodynamic temperature).

  5. VARIABILITY OF ARABLE AND FOREST SOILS PROPERTIES ON ERODED SLOPES

    Directory of Open Access Journals (Sweden)

    Paweł Wiśniewski

    2014-10-01

    Full Text Available The basic method of reducing soil and land erosion is a change of land use, for example, from arable to forest. Particularly effective as a protective role – according to the Polish law – soil-protecting forests. The thesis presents differences in the deformation of the basic soil properties on moraine slopes, depending on land use. There has been presented the function and the efficiency of the soil-protecting forests in erosion control. The soil cross section transects and soil analysis displayed that soil-protecting forests are making an essential soil cover protection from degradation, inter alia, limiting the decrease of humus content, reduction of upper soil horizons and soil pedons layer. On the afforested slopes it was stated some clear changes of grain size and chemical properties of soils in relation to adjacent slopes agriculturally used.

  6. Surface properties-vehicle interaction

    Science.gov (United States)

    Huft, D. L.; Her, I.; Agrawal, S. K.; Zimmer, R. A.; Bester, C. J.

    Several topics related to the surface properties of aircraft runways are discussed. The South Dakota profilometer; development of a data acquisition method for noncontact pavement macrotexture measurement; the traction of an aircraft tire on grooved and porous asphaltic concrete; holes in the pavements; the effect of pavement type and condition on the fuel consumption of vehicles; the traction loss of a suspended tire on a sinusoidal road; the effect of vehicle and driver characteristics on the psychological evaluation of road roughness; the correlation of subjective panel ratings of pavement ride quality with profilometer-derived measures of pavement roughness; a microprocessor-based noncontact distance measuring control system, and, the representation of pavement surface topography in predicting runoff depths and hydroplaning potential are discussed.

  7. The effects of different soil cover management practices on plant biodiversity and soil properties in Mediterranean ancient olive orchards

    Science.gov (United States)

    Madzaric, Suzana; Aly, Adel; Ladisa, Gaetano; Calabrese, Generosa

    2014-05-01

    The effects of different soil cover management practices on plant biodiversity and soil properties in Mediterranean ancient olive orchards Madzaric S., Aly A., Ladisa G. and Calabrese G. The loss of natural plant cover due to the inappropriate soil cover management is often a decisive factor for soil degradation in Mediterranean area. This accompanied with typical climate, characterized by cool, wet winters and hot and dry summers leads to soil erosion and loss of productivity. Due to simplification of agricultural practice and to the attempt to decrease cost of production, keeping soil bare is a widespread agricultural practice in Mediterranean ancient olive orchards (AOOs). The consequences of this are degradation of soil quality and reduction of plant biodiversity. In last year's some alternative practices are proposed in order to protect soil and biodiversity. One of these practices is the "grassing" i.e. covering the soil by selected autochthonous plant species. Objectives of our study are: (1) to evaluate impact of different soil cover management practices on soil properties and plant biodiversity in AOOs and (2) to define a minimum indicators' set (Minimum Data Set - MDS) to evaluate the effectiveness of different agricultural practices in environmental performance of AOOs. A comparison was carried on considering two management systems (conventional vs. organic) and three agricultural practices: conventional with bare soil (CON), organic with soil covered by selected autochthonous species (MIX) and organic left to the native vegetation (NAT). In general a clear positive influence of organic management system was recognized. Some soil quality indicators (physical, chemical and biological) showed responsiveness in describing the effects of management system and agricultural practices on soil properties. The both approaches with vegetation cover on the soil surface (either sowing of mixture or soil left to the natural plant cover) performed better than

  8. Measuring soil physical properties to assess soil quality

    OpenAIRE

    Raczkowski, C.W.

    2007-01-01

    Soil quality is the capacity of a soil to function within ecosystem boundaries to sustain biological productivity, maintain environmental quality, and promote plant, animal and human health. A quantitative assessment of soil quality is invaluable in determining the sustainability of land management systems. Criteria for soil quality assessment are: 1) Choose indicators of soil quality based on the multiple functions of soil that maintain productivity and environmental health, 2)must include s...

  9. Soil physical properties change in the process of oasisization

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Oasisization is a process of converting a natural desert into a man-made oasis in order to satisfy social needs under certain economical and technical conditions. This paper substitutes space for time in order to study physical property changes of oasis soil along the oasisization in about a 1,000-year period. This research focuses on providing the bases for better understanding the process of oasisization. The results show: (1) In about 1,000-year chronological scale, the bulk density and the saturated soil hydraulic conductivity of the surface layer (0-20 cm) significantly reduced with the increase of land reclamation time, while soil porosity, stability of aggregates, and silt content significantly increased. The soil bulk density of the unreclaimed filed (0 year) and the reclaimed field (about 1,000 years) in the surface layer (0-20 cm) are 1.51 g/cm3 and 1.35 g/cm3, the total porosity are 43.16% and 49.27%, the capillary porosity are 38.73% and 47.10%, the water-stable aggregate (>0.25 mm) content are 24.60% and 49.59%, the sand content are 85.42% and 61.56%, the clay content are 3.93% and 4.80%, the specific surface area are 128 cm2/g and 231 cm2/g, and the saturated hydraulic conductivity are 0.74 cm/h and 0.34 cm/h, respectively. (2) In the first 30 years of the oasis reclamation, the changes are relatively fast, and the rates of the saturated soil hydraulic conductivity, dry aggregate (>0.25 mm), water-stable aggregate (>0.25 mm) content, and specific surface area are 0.01 cm/h·yr, 0.58%/yr, 0.50%/yr, and 1.48 cm2/g yr, respectively.

  10. Soil thermal properties at Kalpakkam in coastal south India

    Indian Academy of Sciences (India)

    K Anandakumar; R Venkatesan; Thara V Prabha

    2001-09-01

    Time series of soil surface and subsurface temperatures, soil heat ux, net radiation, air temperature and wind speed were measured at two locations in Kalpakkam, coastal southeast India. The data were analysed to estimate soil thermal di usivity, thermal conductivity, volumetric heat capacity and soil heat ux. This paper describes the results and discusses their implications.

  11. Impact of biochar addition on thermal properties of a sandy soil: modelling approach

    Science.gov (United States)

    Usowicz, Boguslaw; Lipiec, Jerzy; Lukowski, Mateusz; Bis, Zbigniew; Marczewski, Wojciech; Usowicz, Jerzy

    2017-04-01

    Adding biochar can alter soil thermal properties and increase the water holding capacity and reduce the mineral soil fertilization. Biochar in the soil can determine the heat balance on the soil surface and the temperature distribution in the soil profile through changes in albedo and the thermal properties. Besides, amendment of soil with biochar results in improvement of water retention, fertility and pH that are of importance in sandy and acid soils, widely used in agriculture. In this study we evaluated the effects of wood-derived biochar (0, 10, 20, and 40 Mg ha-1) incorporated to a depth of 0-15 cm on the thermal conductivity, heat capacity, thermal diffusivity and porosity in sandy soil under field conditions. In addition, soil-biochar mixtures of various percentages of biochar were prepared to determine the thermal properties in function of soil water status and density in laboratory. It was shown that a small quantity of biochar added to the soil does not significantly affect all the thermal properties of the soil. Increasing biochar concentration significantly enhanced porosity and decreased thermal conductivity and diffusivity with different rate depending on soil water status. The soil thermal conductivity and diffusivity varied widely and non-linearly with water content for different biochar content and soil bulk density. However, the heat capacity increased with biochar addition and water content linearly and was greater at higher than lower soil water contents. The measured and literature thermal data were compared with those obtained from the analytic model of Zhang et al. (2013) and statistical-physical model (Usowicz et al., 2016) based on soil texture, biochar content, bulk density and water content.

  12. Soil mechanical properties at the Apollo 14 site.

    Science.gov (United States)

    Mitchell, J. K.; Bromwell, L. G.; Carrier, W. D., III; Costes, N. C.; Scott, R. F.

    1972-01-01

    The Apollo 14 lunar landing provided a greater amount of information on the mechanical properties of the lunar soil than previous missions. Measurements on core-tube samples and the results of transporter track analyses indicate that the average density of the soil in the Fra Mauro region is in the range from 1.45 to 1.60 g/cu cm. The soil strength appears to be higher in the vicinity of the site of the Apollo 14 lunar surface experiments package, and trench data suggest that strength increases with depth. Lower-bound estimates of soil cohesion give values of 0.03 to 0.10 kN/sq m, which are lower than values of 0.35 to 0.70 kN/sq m estimated for soils encountered in previous missions. The in situ modulus of elasticity, deduced from the measured seismic-wave velocity, is compatible with that to be expected for a terrestrial silty fine sand in the lunar gravitational field.

  13. Spatial variability of the properties of marsh soils and their impact on vegetation

    Science.gov (United States)

    Sidorova, V. A.; Svyatova, E. N.; Tseits, M. A.

    2015-03-01

    Spatial variability of the properties of soils and the character of vegetation was studied on seacoasts of the Velikii Island in the Kandalaksha Bay of the White Sea. It was found that the chemical and physicochemical properties of marsh soils (Tidalic Fluvisols) are largely dictated by the distance from the sea and elevation of the sampling point above sea level. The spatial distribution of the soil properties is described by a quadratic trend surface. With an increase in the distance from the sea, the concentration of ions in the soil solution decreases, and the organic carbon content and soil acidity become higher. The spatial dependence of the degree of variability in the soil properties is moderate. Regular changes in the soil properties along the sea-land gradient are accompanied by the presence of specific spatial patterns related to the system of temporary water streams, huge boulders, and beached heaps of sea algae and wood debris. The cluster analysis made it possible to distinguish between five soil classes corresponding to the following plant communities: barren surface (no permanent vegetation), clayey-sandy littoral with sparse halophytes, marsh with large rhizomatous grasses, and grass-forb-bunchberry vegetation of forest margins. The subdivision into classes is especially distinct with respect to the concentration of chloride ions. The following groups of factors affect the distribution of vegetation: the composition of the soil solution, the height above sea level, the pH of water suspensions, and the humus content.

  14. Cover Crops Effects on Soil Chemical Properties and Onion Yield

    Directory of Open Access Journals (Sweden)

    Rodolfo Assis de Oliveira

    2016-01-01

    Full Text Available ABSTRACT Cover crops contribute to nutrient cycling and may improve soil chemical properties and, consequently, increase crop yield. The aim of this study was to evaluate cover crop residue decomposition and nutrient release, and the effects of these plants on soil chemical properties and on onion (Allium cepa L. yield in a no-tillage system. The experiment was carried out in an Inceptisol in southern Brazil, where cover crops were sown in April 2012 and 2013. In July 2013, shoots of weeds (WD, black oats (BO, rye (RY, oilseed radish (RD, oilseed radish + black oats (RD + BO, and oilseed radish + rye (RD + RY were cut at ground level and part of these material from each treatment was placed in litter bags. The litter bags were distributed on the soil surface and were collected at 0, 30, 45, 60, 75, and 90 days after distribution (DAD. The residues in the litter bags were dried, weighed, and ground, and then analyzed to quantify lignin, cellulose, non-structural biomass, total organic carbon (TOC, N, P, K, Ca, and Mg. In November 2012 and 2013, onion crops were harvested to quantify yield, and bulbs were classified according to diameter, and the number of rotted and flowering bulbs was determined. Soil in the 0.00-0.10 m layer was collected for chemical analysis before transplanting and after harvesting onion in December 2012 and 2013. The rye plant residues presented the highest half-life and they released less nutrients until 90 DAD. The great permanence of rye residue was considered a protection to soil surface, the opposite was observed with spontaneous vegetation. The cultivation and addition of dry residue of cover crops increased the onion yield at 2.5 Mg ha-1.

  15. Spectral reflectance of surface soils - A statistical analysis

    Science.gov (United States)

    Crouse, K. R.; Henninger, D. L.; Thompson, D. R.

    1983-01-01

    The relationship of the physical and chemical properties of soils to their spectral reflectance as measured at six wavebands of Thematic Mapper (TM) aboard NASA's Landsat-4 satellite was examined. The results of performing regressions of over 20 soil properties on the six TM bands indicated that organic matter, water, clay, cation exchange capacity, and calcium were the properties most readily predicted from TM data. The middle infrared bands, bands 5 and 7, were the best bands for predicting soil properties, and the near infrared band, band 4, was nearly as good. Clustering 234 soil samples on the TM bands and characterizing the clusters on the basis of soil properties revealed several clear relationships between properties and reflectance. Discriminant analysis found organic matter, fine sand, base saturation, sand, extractable acidity, and water to be significant in discriminating among clusters.

  16. Effects of Biochar Amendment on Soil Properties and Soil Carbon Sequestration

    Science.gov (United States)

    Zhang, R.; Zhu, S.

    2015-12-01

    Biochar addition to soils potentially affects various soil properties and soil carbon sequestration, and these effects are dependent on biochars derived from different feedstock materials and pyrolysis processes. The objective of this study was to investigate the effects of amendment of different biochars on soil physical and biological properties as well as soil carbon sequestration. Biochars were produced with dairy manure and woodchip at temperatures of 300, 500, and 700°C, respectively. Each biochar was mixed at 5% (w/w) with a forest soil and the mixture was incubated for 180 days, during which soil physical and biological properties, and soil respiration rates were measured. Results showed that the biochar addition significantly enhanced the formation of soil macroaggregates at the early incubation time. The biochar application significantly reduced soil bulk density, increased the amount of soil organic matter, and stimulated microbial activity and soil respiration rates at the early incubation stage. Biochar applications improved water retention capacity, with stronger effects by biochars produced at higher pyrolysis temperatures. At the same suction, the soil with woodchip biochars possessed higher water content than with the dairy manure biochars. Biochar addition significantly affected the soil physical and biological properties, which resulted in different soil carbon mineralization rates and the amount of soil carbon storage.

  17. chemical properties of soil in rivers state, nigeria *ch

    African Journals Online (AJOL)

    Osondu

    chemical properties and the spatial extent ... the core and decreased with increasing distance from the core. ... Key words: Charcoal, Soil, Change index, Niger Delta, Nigeria ..... practices. References. Agbenin, J.O. (1995), Laboratory manual for Soil.

  18. Temporal and spatial variability of soil hydraulic properties with implications on soil moisture simulations and irrigation scheduling

    Science.gov (United States)

    Feki, Mouna; Ravazzani, Giovanni; Mancini, Marco

    2017-04-01

    The increase in consumption of water resources, combined with climate change impacts, calls for new sources of water supply and/or different managements of available resources in agriculture. One way to increase the quality and quantity of agricultural production is using modern technology to make farms more "intelligent", the so-called "precision agriculture" also known as 'smart farming'. To this aim hydrological models play crucial role for their ability to simulate water movement from soil surface to groundwater and to predict onset of stress condition. However, optimal use of mathematical models requires intensive, time consuming and expensive collection of soil related parameters. Typically, soils to be characterized, exhibit large variations in space and time as well during the cropping cycle, due to biological processes and agricultural management practices: tillage, irrigation, fertilization and harvest. Soil properties are subjected to diverse physical and chemical changes that lead to a non-stability in terms of water and chemical movements within the soil and to the groundwater as well. The aim of this study is to assess the variability of soil hydraulic properties over a cropping cycle. The study site is a surface irrigated Maize field located in Secugnago (45◦13'31.70" N, 9 ◦36'26.82 E), in Northern Italy-Lombardy region. The field belongs to the Consortium Muzza Bassa Lodigiana, within which meteorological data together with soil moisture were monitored during the cropping season of 2015. To investigate soil properties variations, both measurements in the field and laboratory tests on both undisturbed and disturbed collected samples were performed. Soil samples were taken from different locations within the study area and at different depths (surface, 20cm and 40cm) at the beginning and in the middle of the cropping cycle and after the harvest. During three measuring campaigns, for each soil samples several parameters were monitored (Organic

  19. Soil Carbon Dioxide Production and Surface Fluxes: Subsurface Physical Controls

    Science.gov (United States)

    Risk, D.; Kellman, L.; Beltrami, H.

    Soil respiration is a critical determinant of landscape carbon balance. Variations in soil temperature and moisture patterns are important physical processes controlling soil respiration which need to be better understood. Relationships between soil respi- ration and physical controls are typically addressed using only surface flux data but other methods also exist which permit more rigorous interpretation of soil respira- tion processes. Here we use a combination of subsurface CO_{2} concentrations, surface CO_{2} fluxes and detailed physical monitoring of the subsurface envi- ronment to examine physical controls on soil CO_{2} production at four climate observatories in Eastern Canada. Results indicate that subsurface CO_{2} produc- tion is more strongly correlated to the subsurface thermal environment than the surface CO_{2} flux. Soil moisture was also found to have an important influence on sub- surface CO_{2} production, particularly in relation to the soil moisture - soil profile diffusivity relationship. Non-diffusive profile CO_{2} transport appears to be im- portant at these sites, resulting in a de-coupling of summertime surface fluxes from subsurface processes and violating assumptions that surface CO_{2} emissions are the result solely of diffusion. These results have implications for the study of soil respiration across a broad range of terrestrial environments.

  20. Soil Specific Surface Area and Non-Singularity of Soil-Water Retention at Low Saturations

    DEFF Research Database (Denmark)

    Arthur, Emmanuel; Tuller, Markus; Møldrup, Per

    2013-01-01

    and Or (TO) and new single-parameter non-singularity (SPN) models; and evaluate estimates of SSA from water sorption, ethylene glycol monoethyl ether (EGME), and N2–BET methods. The AquaSorp successfully measured water sorption isotherms (∼140 data points) within a reasonably short time (1–3 d). The SPN......The dry end of the soil water characteristic (SWC) is important for modeling vapor flow dynamics and predicting soil properties such as specific surface area (SSA) and clay content (CL). Verification of new instrumentation for rapid measurement of the dry end of the SWC is relevant to avoid long...... model well described the distinct non-singularity between the adsorption and desorption branches, while the TO model captured the adsorption data reasonably well (model were...

  1. Organic matter composition of soil macropore surfaces under different agricultural management practices

    Science.gov (United States)

    Glæsner, Nadia; Leue, Marin; Magid, Jacob; Gerke, Horst H.

    2016-04-01

    Understanding the heterogeneous nature of soil, i.e. properties and processes occurring specifically at local scales is essential for best managing our soil resources for agricultural production. Examination of intact soil structures in order to obtain an increased understanding of how soil systems operate from small to large scale represents a large gap within soil science research. Dissolved chemicals, nutrients and particles are transported through the disturbed plow layer of agricultural soil, where after flow through the lower soil layers occur by preferential flow via macropores. Rapid movement of water through macropores limit the contact between the preferentially moving water and the surrounding soil matrix, therefore contact and exchange of solutes in the water is largely restricted to the surface area of the macropores. Organomineral complex coated surfaces control sorption and exchange properties of solutes, as well as availability of essential nutrients to plant roots and to the preferentially flowing water. DRIFT (Diffuse Reflectance infrared Fourier Transform) Mapping has been developed to examine composition of organic matter coated macropores. In this study macropore surfaces structures will be determined for organic matter composition using DRIFT from a long-term field experiment on waste application to agricultural soil (CRUCIAL, close to Copenhagen, Denmark). Parcels with 5 treatments; accelerated household waste, accelerated sewage sludge, accelerated cattle manure, NPK and unfertilized, will be examined in order to study whether agricultural management have an impact on the organic matter composition of intact structures.

  2. Soil properties mapping with the DIGISOIL multi-sensor system

    Science.gov (United States)

    Grandjean, G.

    2012-04-01

    The multidisciplinary DIGISOIL project aimed to integrate and improve in situ and proximal measurement technologies for the assessment of soil properties and soil degradation indicators, going from the sensing technologies to their integration and their application in (digital) soil mapping (DSM). In order to assess and prevent soil degradation and to benefit from the different ecological, economical and historical functions of the soil in a sustainable way, high resolution and quantitative maps of soil properties are needed. The core objective of the project is to explore and exploit new capabilities of advanced geophysical technologies for answering this societal demand. To this aim, DIGISOIL addresses four issues covering technological, soil science and economic aspects: (i) the validation of geophysical (in situ, proximal and airborne) technologies and integrated pedo-geophysical inversion techniques (mechanistic data fusion) (ii) the relation between the geophysical parameters and the soil properties, (iii) the integration of the derived soil properties for mapping soil functions and soil threats, (iv) the pre-evaluation, standardisation and sub-industrialization of the proposed methodologies, including technical and economical studies related to the societal demand. With respect to these issues, the DIGISOIL project allows to develop, test and validate the most relevant geophysical technologies for mapping soil properties. The system was tested on different field tests, and validated the proposed technologies and solutions for each of the identified methods: geoelectric, GPR, EMI, seismics, magnetic and hyperspectral. After data acquisition systems, sensor geometry, and advanced data processing techniques have been developed and validated, we present now the solutions for going from geophysical data to soil properties maps. For two test sites, located respectively in Luxembourg (LU) and Mugello (IT) a set of soil properties maps have been produced. They give

  3. Chemical Properties of Paddy Soils in Thailand and Malaysia

    OpenAIRE

    Kai, Hideaki; Masayna, Wittaya; Aibe, Toshiharu; Hamada, Eisuke; Jiraporncharoen, Suchart; Yamada, Yoshio; Vacharotayan, Sorasith; Cholitkul, Wisit; Kanareugsa, Chob

    1981-01-01

    As a part of International Cooperative Studies on the Increasing Productivity of Soils in Tropical Area (1976-1978). chemical properties of paddy soils in Thailand and Malaysia were studied for the purpose of elucidation of the fundamental characteristics of the soils so as to evaluate soil fertility and to implement advanced technical practices for higher production of rice. Each several soil samples were collected from the central, northern, northeastern and southern regions of Thailand and...

  4. Effects of Heavy, Tracked-Vehicle Disturbance on Forest Soil Properties at Fort Benning, Georgia

    Energy Technology Data Exchange (ETDEWEB)

    Garten, C.T.,JR.

    2004-05-20

    The purpose of this report is to describe the effects of heavy, tracked-vehicle disturbance on various measures of soil quality in training compartment K-11 at Fort Benning, Georgia. Predisturbance soil sampling in April and October of 2002 indicated statistically significant differences in soil properties between upland and riparian sites. Soil density was less at riparian sites, but riparian soils had significantly greater C and N concentrations and stocks than upland soils. Most of the C stock in riparian soils was associated with mineral-associated organic matter (i.e., the silt + clay fraction physically separated from whole mineral soil). Topographic differences in soil N availability were highly dependent on the time of sampling. Riparian soils had higher concentrations of extractable inorganic N than upland soils and also exhibited significantly greater soil N availability during the spring sampling. The disturbance experiment was performed in May 2003 by driving a D7 bulldozer through the mixed pine/hardwood forest. Post-disturbance sampling was limited to upland sites because training with heavy, tracked vehicles at Fort Benning is generally confined to upland soils. Soil sampling approximately one month after the experiment indicated that effects of the bulldozer were limited primarily to the forest floor (O-horizon) and the surface (0-10 cm) mineral soil. O-horizon dry mass and C stocks were significantly reduced, relative to undisturbed sites, and there was an indication of reduced mineral soil C stocks in the disturbance zone. Differences in the surface (0-10 cm) mineral soil also indicated a significant increase in soil density as a result of disturbance by the bulldozer. Although there was some tendency for greater soil N availability in disturbed soils, the changes were not significantly different from undisturbed controls. It is expected that repeated soil disturbance over time, which will normally occur in a military training area, would simply

  5. Effects of coastal afforestation on some soil properties in Lakshmipur coast of Bangladesh

    Institute of Scientific and Technical Information of China (English)

    K. M. Shaifullah; M. Mezbahuddin; M. Sujauddin; S. M. S. Haque

    2008-01-01

    Coastal zones comprising important intertidal tropical and subtropical ecosystems are characterized by high productivity, diversity and unique zonation of various plant and animal communities. The comparison of some selected physicochemical soil properties viz. Texture, particle density, moisture content, pH, organic carbon and total nitrogen between planted site (Telir char) and barren site (Boyar char) has been investigated at surface (0-10 cm) and subsurface (10-45 cm) soil across three different land strips viz. Inland, middle part and sea side in Lakshmipur coast of Bangladesh. Sand particles in the soil were lower in planted site than barren site. The reverse trend was found in case of both silt and clay percentage. Coastal afforestation had a significant effect on soil binding process since a common trend of increment in soil particle density was noticed. Maximum increment (20.43% to 23.30%) in soil moisture content was recorded in surface soil across the seaside while at subsurface soil both across the middle part (19.53% to 22.30%) and sea side (20.19% to 22.96%). Moreover, the highest reduction in soil pH was recorded at surface soil (7.27 to 6.60) across the sea side and subsurface soil (7.16 to 6.67) in inland due to the influence of coastal plantation. Across all the land strips and the soil depths studied, soil organic carbon was higher in planted site than in barren site with only exception at subsurface soil in the middle part (0.50% in both sites). Total soil nitrogen in the study area was increased at both depths due to forestation with the highest increment in the inland at both surface and subsurface soil.

  6. Filter properties of seam material from paved urban soils

    Directory of Open Access Journals (Sweden)

    T. Nehls

    2007-08-01

    Full Text Available We studied pavement seam material. This is the soil substrate in joints of pervious pavements in urban areas. It is mostly 1 cm thick and develops from the original seam filling by depositions of all kinds of urban residues, including anthropogenic organic substances. It was investigated, how this unique form of organic matter influences the filter properties of seam material and how the seam material influences heavy metal transport through the pavement. The seam material is characterised by a darker munsell colour, higher organic carbon content, higher surface areas, higher cation exchange capacities, but a lower fraction of high adsorption energy sites compared to the original seam filling. The deposited anthropogenic organic matter itself could be characterised as particulate and non-polar. Compared to natural soils, it has a small surface area and a low surface charge density resulting in a small cation exchange capacity of only 75 cmol(+ kg−1C. The seam material shows stronger sorption of Pb and Cd compared to the original construction sand. The retardation capacity of seam material towards Pb is similar, towards Cd it is much smaller compared to natural soils. The simulated long term displacement scenarios for a street in Berlin do not indicate an acute contamination risk for Pb. For Cd the infiltration from ponds can lead to a displacement of Cd during only one decade.

  7. Grey water impact on soil physical properties

    Directory of Open Access Journals (Sweden)

    Miguel L. Murcia-Sarmiento

    2014-01-01

    Full Text Available Due to the increasing demand for food produced by the increase in population, water as an indispensable element in the growth cycle of plants every day becomes a fundamental aspect of production. The demand for the use of this resource is necessary to search for alternatives that should be evaluated to avoid potential negative impacts. In this paper, the changes in some physical properties of soil irrigated with synthetic gray water were evaluated. The experimental design involved: one factor: home water and two treatments; without treated water (T1 and treated water (T2. The variables to consider in the soil were: electrical conductivity (EC, exchangeable sodium percentage (ESP, average weighted diameter (MWD and soil moisture retention (RHS. The water used in drip irrigation high frequency was monitored by tensiometer for producing a bean crop (Phaseolous vulgaris L. As filtration system used was employed a unit composed of a sand filter (FLA and a subsurface flow wetland artificial (HFSS. The treatments showed significant differences in the PSI and the RHS. The FLA+HFSS system is an alternative to the gray water treatment due to increased sodium retention.

  8. Influence of biochar on the physical, chemical and retention properties of an amended sandy soil

    Science.gov (United States)

    Baiamonte, Giorgio; De Pasquale, Claudio; Parrino, Francesco; Crescimanno, Giuseppina

    2017-04-01

    Soil porosity plays an important role in soil-water retention and water availability to crops, potentially affecting both agricultural practices and environmental sustainability. The pore structure controls fluid flow and transport through the soil, as well as the relationship between the properties of individual minerals and plants. Moreover, the anthropogenic pressure on soil properties has produced numerous sites with extensive desertification process close to residential areas. Biochar (biologically derived charcoal) is produced by pyrolysis of biomasses under low oxygen conditions, and it can be applied for recycling organic waste in soils and increase soil fertility, improving soil structure and enhancing soil water storage and soil water movement. Soil application of biochar might have agricultural, environmental and sustainability advantages over the use of organic manures or compost, as it is a porous material with a high inner surface area. The main objectives of the present study were to investigate the possible application of biochar from forest residues, derived from mechanically chipped trunks and large branches of Abies alba M., Larix decidua Mill., Picea excelsa L., Pinus nigra A. and Pinus sylvestris L. pyrolysed at 450 °C for 48h, to improve soil structural and hydraulic properties (achieving a stabilization of soil). Different amount of biochar were added to a desertic sandy soil, and the effect on soil porosity water retention and water available to crops were investigated. The High Energy Moisture Characteristic (HEMC) technique was applied to investigate soil-water retention at high-pressure head levels. The adsorption and desorption isotherms of N2 on external surfaces were also determined in order to investigate micro and macro porosity ratio. Both the described model of studies on adsorption-desorption experiments with the applied isotherms model explain the increasing substrate porosity with a particular attention to the macro and micro

  9. The global distribution and dynamics of surface soil moisture

    Science.gov (United States)

    McColl, Kaighin A.; Alemohammad, Seyed Hamed; Akbar, Ruzbeh; Konings, Alexandra G.; Yueh, Simon; Entekhabi, Dara

    2017-01-01

    Surface soil moisture has a direct impact on food security, human health and ecosystem function. It also plays a key role in the climate system, and the development and persistence of extreme weather events such as droughts, floods and heatwaves. However, sparse and uneven observations have made it difficult to quantify the global distribution and dynamics of surface soil moisture. Here we introduce a metric of soil moisture memory and use a full year of global observations from NASA's Soil Moisture Active Passive mission to show that surface soil moisture--a storage believed to make up less than 0.001% of the global freshwater budget by volume, and equivalent to an, on average, 8-mm thin layer of water covering all land surfaces--plays a significant role in the water cycle. Specifically, we find that surface soil moisture retains a median 14% of precipitation falling on land after three days. Furthermore, the retained fraction of the surface soil moisture storage after three days is highest over arid regions, and in regions where drainage to groundwater storage is lowest. We conclude that lower groundwater storage in these regions is due not only to lower precipitation, but also to the complex partitioning of the water cycle by the surface soil moisture storage layer at the land surface.

  10. Vital soil; function, value and properties

    NARCIS (Netherlands)

    Doelman, P.; Eijsackers, H.J.P.

    2004-01-01

    Healthy soil, with active soil life, deters long-term soil degradation and ensures that geo-physical processes are undisturbed. Is the vitality of soil under threat due to human civilization? Or is it due to contamination, intensification, and deforestation? Vital Soil aims to look at the effects so

  11. Vital soil; function, value and properties

    NARCIS (Netherlands)

    Doelman, P.; Eijsackers, H.J.P.

    2004-01-01

    Healthy soil, with active soil life, deters long-term soil degradation and ensures that geo-physical processes are undisturbed. Is the vitality of soil under threat due to human civilization? Or is it due to contamination, intensification, and deforestation? Vital Soil aims to look at the effects

  12. Estimating Infiltration Parameters from Basic Soil Properties

    Science.gov (United States)

    van de Genachte, G.; Mallants, D.; Ramos, J.; Deckers, J. A.; Feyen, J.

    1996-05-01

    Infiltration data were collected on two rectangular grids with 25 sampling points each. Both experimental grids were located in tropical rain forest (Guyana), the first in an Arenosol area and the second in a Ferralsol field. Four different infiltration models were evaluated based on their performance in describing the infiltration data. The model parameters were estimated using non-linear optimization techniques. The infiltration behaviour in the Ferralsol was equally well described by the equations of Philip, Green-Ampt, Kostiakov and Horton. For the Arenosol, the equations of Philip, Green-Ampt and Horton were significantly better than the Kostiakov model. Basic soil properties such as textural composition (percentage sand, silt and clay), organic carbon content, dry bulk density, porosity, initial soil water content and root content were also determined for each sampling point of the two grids. The fitted infiltration parameters were then estimated based on other soil properties using multiple regression. Prior to the regression analysis, all predictor variables were transformed to normality. The regression analysis was performed using two information levels. The first information level contained only three texture fractions for the Ferralsol (sand, silt and clay) and four fractions for the Arenosol (coarse, medium and fine sand, and silt and clay). At the first information level the regression models explained up to 60% of the variability of some of the infiltration parameters for the Ferralsol field plot. At the second information level the complete textural analysis was used (nine fractions for the Ferralsol and six for the Arenosol). At the second information level a principal components analysis (PCA) was performed prior to the regression analysis to overcome the problem of multicollinearity among the predictor variables. Regression analysis was then carried out using the orthogonally transformed soil properties as the independent variables. Results for

  13. Surface properties and phosphate adsorption of binary systems containing goethite and kaolinite

    NARCIS (Netherlands)

    Wei, S.Y.; Tan, W.F.; Liu, F.; Zhao, W.; Weng, L.

    2014-01-01

    In soils goethite and kaolinite are often cemented together as a binary association, which has a significant influence on the physical and chemical properties of soils. In this study, the surface properties and phosphate adsorption of goethite, kaolinite, goethite-kaolinite association (GKA) and

  14. Surface properties and phosphate adsorption of binary systems containing goethite and kaolinite

    NARCIS (Netherlands)

    Wei, S.Y.; Tan, W.F.; Liu, F.; Zhao, W.; Weng, L.

    2014-01-01

    In soils goethite and kaolinite are often cemented together as a binary association, which has a significant influence on the physical and chemical properties of soils. In this study, the surface properties and phosphate adsorption of goethite, kaolinite, goethite-kaolinite association (GKA) and goe

  15. Surface properties and phosphate adsorption of binary systems containing goethite and kaolinite

    NARCIS (Netherlands)

    Wei, S.Y.; Tan, W.F.; Liu, F.; Zhao, W.; Weng, L.

    2014-01-01

    In soils goethite and kaolinite are often cemented together as a binary association, which has a significant influence on the physical and chemical properties of soils. In this study, the surface properties and phosphate adsorption of goethite, kaolinite, goethite-kaolinite association (GKA) and goe

  16. Burn effects on soil properties associated to heat transfer under contrasting moisture content.

    Science.gov (United States)

    Badía, David; López-García, Sergio; Martí, Clara; Ortíz-Perpiñá, Oriol; Girona-García, Antonio; Casanova-Gascón, José

    2017-12-01

    The aim of this work is to investigate the topsoil thickness affected by burning under contrasting soil moisture content (field capacity versus air-dried conditions). A mollic horizon of an Aleppo pine forest was sampled and burned in the laboratory, recording the temperature continuously at the topsoil surface and at soil depths of 1, 2, and 3cm. Changes in soil properties were measured at 0-1, 1-2, 2-3, and 3-4cm. Both the maximum temperature and the charring intensities were significantly lower in wet soils than in air-dried soils up to 3cm in depth. Moreover, soil heating was slower and cooling faster in wet soils as compared to dry soils. Therefore, the heat capacity increase of the soil moistened at field capacity plays a more important role than the thermal conductivity increase on heat transfer on burned soils. Burning did not significantly modify the pH, the carbonate content and the chroma, for either wet or dry soil. Fire caused an immediate and significant decrease in water repellency in the air-dried soil, even at 3cm depth, whereas the wet soil remained hydrophilic throughout its thickness, without being affected by burning. Burning depleted 50% of the soil organic C (OC) content in the air-dried soil and 25% in the wet soil at the upper centimeter, which was blackened. Burning significantly decreased the total N (TN) content only in the dry soil (to one-third of the original value) through the first centimeter of soil depth. Soluble ions, measured by electrical conductivity (EC), increased after burning, although only significantly in the first centimeter of air-dried soils. Below 2cm, burning had no significant effects on the brightness, OC, TN, or EC, for either wet or dry soil. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. Effect of aggregation on SOC transport: linking soil properties to sediment organic matter

    Science.gov (United States)

    Kuhn, Nikolaus J.

    2016-04-01

    Soils are an interface between the Earth's spheres and shaped by the nature of the interaction between them. The relevance of soil properties for the nature of the interaction between atmosphere, hydrosphere and biosphere is well-studied and accepted, on point- or ecotone-scale. However, this understanding of the largely vertical connections between spheres is not matched by a similar recognition of soil properties affecting processes acting largely in a lateral way across the land surface, such as erosion, transport and deposition of soil and the associated organic matter. Understanding the redistribution of eroded soil organic matter falls into several disciplines, most notably soil science, agronomy, hydrology and geomorphology, and recently into biogeochemistry. Accordingly, the way soil and sediment are described differs: in soil science, aggregation and structure are essential properties, while most process-based soil erosion models treat soil as a mixture of individual mineral grains, based on concepts derived in fluvial geomorphology or civil engineering. The actual behavior of aggregated sediment and the associated organic matter is not reflected by either approach and difficult to capture due to the dynamic nature of aggregation, especially in an environment such as running water. Still, a proxy to assess the uncertainties introduced by aggregation on the behavior of soil/sediment organic while moving in water across landscapes and into the aquatic system would represent a major step forward. To develop such a proxy, a database collating relevant soil, organic matter and sediment properties could serve as an initial step to identify which soil types and erosion scenarios are prone to generate a high uncertainty compared to the use of soil texture in erosion models. Furthermore, it could serve to develop standardized analytical procedures for appropriate description of soil and organic matter as sediment.

  18. Alteration of soil hydraulic properties and soil water repellency by fire and vegetation succession in a sagebrush steppe ecosystem

    Science.gov (United States)

    Chandler, D. G.; Seyfried, M. S.

    2016-12-01

    This study explores the impacts of fire and plant community succession on soil water repellency (SWR) and infiltration properties to improve understanding the long term impacts of prescribed fire on SWR and infiltration properties in sagebrush-steppe ecosystem. The objectives of this study were: 1) To explore the temporal effects of prescribed burning in sagebrush dominated landscape; 2) To investigate spatial variability of soil hydrologic properties; 3) To determine the relationship among soil organic fraction, soil hydrophobicity and infiltration properties. Fieldwork was conducted in paired catchments with three dominant vegetation cover communities: Low sage, big mountain sage and aspen. Detailed, heavily replicated analyses were conducted for unsaturated hydraulic conductivity, sorptivity water drop penetration time and static soil-water-air contact angle. The results show that the severity and presence of surface soil water repellency were considerably reduced six years after fire and that hydraulic conductivity increased significantly in each vegetation cover compared to pre-burn condition. Comparisons among soil hydrological properties shows that hydraulic conductivity is not strongly related to SWR, and that sorptivity is negatively correlated with SWR. The spatial variance of hydraulic properties within the burned high sage and low sage, in particularly, spatial variability of hydraulic conductivity is basically controlled by soil texture and sorptivity is affected by soil wettability. The average water repellency in Low Sage area was significantly different with Big Sage and Aspen as the gap of organic content between Low Sage and other vegetation area. The result of contact angle measurement and organic content analysis shows a strong positive correlation between SWR and organic matter.

  19. The methods of geomorphometry and digital soil mapping for assessing spatial variability in the properties of agrogray soils on a slope

    Science.gov (United States)

    Gopp, N. V.; Nechaeva, T. V.; Savenkov, O. A.; Smirnova, N. V.; Smirnov, V. V.

    2017-01-01

    The relationships between the morphometric parameters (MPs) of topography calculated on the basis of digital elevation model (ASTER GDEM, 30 m) and the properties of the plow layer of agrogray soils on a slope were analyzed. The contribution of MPs to the spatial variability of the soil moisture reached 42%; to the content of physical clay (digital soil mapping. The regression analysis showed statistically significant correlations between the properties of the plow layer and the MPs describing surface runoff, geometric forms of surface, and the soil temperature regime.

  20. Physical and Social Impacts on Hydrologic Properties of Residential Lawn Soils

    Science.gov (United States)

    Smith, M. L.; Band, L. E.

    2009-12-01

    Land development practices result in compacted soils that filter less water, increase surface runoff and decrease groundwater infiltration. Literature review of soil infiltration rates reveals that developed sites’ rates, 0.1 to 24 cm/hr, are reduced when compared to rates of undeveloped sites, 14.7 to 48.7 cm/hr. Yet, most hydrologic models neglect the impacts of residential soil compaction on infiltration and runoff. The objectives of this study included: determination of differences between soil properties of forested and residential lawn sites in Baltimore Ecosystem Study; parcel-scale location impacts on soil properties; and the impact of social and physical factors on the distribution of soil properties of residential lawns. Infiltration measures were collected in situ using a Cornell Sprinkle Infiltrometer and soil cores were collected for water retention and texture analysis. These soil properties were paired with GIS data relating to age of house construction, property value, parcel area, percent canopy cover per parcel and parcel distance from stream. The study finds that saturated infiltration rates in residential lawn soils are significantly lower than forest soils due to reduced macroporosity of residential lawn soils. Intra-parcel differences in bulk density and soil depth indicate that runoff from residential lawns is more likely from near-house and near-curb locations than the mid-front or backyards. The range of infiltration rate, bulk density and percent organic matter can be explained by readily attainable social and physical factors—age of house construction and parcel distance to stream. The impacts of land management on soil properties appear to be more prominent than percent canopy.

  1. Soil friability - Concept, Assessment and Effects of Soil Properties and Management

    DEFF Research Database (Denmark)

    Munkholm, Lars Juhl

    Soil friability is a key soil physical property yielding valuable information on the ease of productin a favorable seed- and root beds during tillage operations. Therefore, soil friability is acrucial soil property in relation to the ability of soil to support plant growth and to minimzethe energy...... in the light of the present renewed focus on global food security together with a focus on fossil fuel consumption and greenhouse gas emissions in crop production. Certainly, the demand for well-functioning, arable soils is rising to meet the global challenges....

  2. Effects of pig slurry application on soil physical and chemical properties and glyphosate mobility

    Directory of Open Access Journals (Sweden)

    Daniela Aparecida de Oliveira

    2014-10-01

    Full Text Available Pig slurry applied to soil at different rates may affect soil properties and the mobility of chemical compounds within the soil. The purpose of this study was to evaluate the effects of rates of pig slurry application in agricultural areas on soil physical and chemical properties and on the mobility of glyphosate through the soil profile. The study was carried out in the 12th year of an experiment with pig slurry applied at rates of 0 (control, 50, 100 and 200 m³ ha-1 yr-1 on a Latossolo Vermelho distrófico (Hapludox soil. In the control, the quantities of P and K removed by harvested grains were replaced in the next crop cycle. Soil physical properties (bulk density, porosity, texture, and saturated hydraulic conductivity and chemical properties (organic matter, pH, extractable P, and exchangeable K were measured. Soil solution samples were collected at depths of 20, 40 and 80 cm using suction lysimeters, and glyphosate concentrations were measured over a 60-day period after slurry application. Soil physical and chemical properties were little affected by the pig slurry applications, but soil pH was reduced and P levels increased in the surface layers. In turn, K levels were increased in sub-surface layers. Glyphosate concentrations tended to decrease over time but were not affected by pig slurry application. The concentrations of glyphosate found in different depths show that the pratice of this application in agricultural soils has the potential for contamination of groundwater, especially when the water table is the surface and heavy rains occur immediately after application.

  3. Does pH influence soil hydro-mechanical properties?

    Science.gov (United States)

    Chaplain, V.; Défossez, P.; Delarue, G.; Dexter, A. R.; Richard, G.; Tessier, D.

    2009-04-01

    Does pH influence soil hydro-mechanical properties ? V. Chaplain1, P. Défossez2, G. Delarue1, A.R. Dexter3, G. Richard3 and D. Tessier1. 1 UR INRA PESSAC RD 10, F-78026 Versailles cedex 2 UMR INRA/URCA FARE, 2 Esplanade Roland Garros, BP 224 F-51686 Reims cedex 2 3 UR INRA Sols 2163 Avenue de la Pomme de Pin - CS 40001 ARDON F-45075 Orléans Cedex 2 Corresponding author : chaplain@versailles.inra.fr Structure of soils and its dynamic, physico-chemistry of the interface are of a great importance in the fate of organic pollutants because it governs the accessibility of pollutants to micro-organisms. The soil structure of soils is related to physical parameters (texture, density, water content) but the physico-chemical properties of the interface is not considered. In this study we performed hydro-mechanical measurements on soil samples taken from the 42-plot long-term experiment in Versailles. Indeed six plots were selected to cover a large range of pH values from acid (3.5) to alkaline (8.2) due to the repeated application of fertilizers. Soils were taken in the 0-20 cm and in the 30-35 cm layer out of the ploughed zone. All soils had similar texture and composition with low organic carbon. Therefore pH changes the surface charges and hydrophobicity that are implied in aggregation process. The two layers had the same pH values. The precompression stress Pc and the compression index Cc were derived from confined compression tests performed on remoulded soil samples (density 1.45 g/cm3) at saturation. Results shows that the precompression stress increased at pH lower than 4. In acid case, precompression stress was higher in subsoil. This increase of Pc was attributed to the hydrophobicity due in part to the condensation of charges probably sensitive to the humectation/dessication processes.

  4. Quantifying the heterogeneity of soil compaction, physical soil properties and soil moisture across multiple spatial scales

    Science.gov (United States)

    Coates, Victoria; Pattison, Ian; Sander, Graham

    2016-04-01

    England's rural landscape is dominated by pastoral agriculture, with 40% of land cover classified as either improved or semi-natural grassland according to the Land Cover Map 2007. Since the Second World War the intensification of agriculture has resulted in greater levels of soil compaction, associated with higher stocking densities in fields. Locally compaction has led to loss of soil storage and an increased in levels of ponding in fields. At the catchment scale soil compaction has been hypothesised to contribute to increased flood risk. Previous research (Pattison, 2011) on a 40km2 catchment (Dacre Beck, Lake District, UK) has shown that when soil characteristics are homogeneously parameterised in a hydrological model, downstream peak discharges can be 65% higher for a heavy compacted soil than for a lightly compacted soil. However, at the catchment scale there is likely to be a significant amount of variability in compaction levels within and between fields, due to multiple controlling factors. This research focusses in on one specific type of land use (permanent pasture with cattle grazing) and areas of activity within the field (feeding area, field gate, tree shelter, open field area). The aim was to determine if the soil characteristics and soil compaction levels are homogeneous in the four areas of the field. Also, to determine if these levels stayed the same over the course of the year, or if there were differences at the end of the dry (October) and wet (April) periods. Field experiments were conducted in the River Skell catchment, in Yorkshire, UK, which has an area of 120km2. The dynamic cone penetrometer was used to determine the structural properties of the soil, soil samples were collected to assess the bulk density, organic matter content and permeability in the laboratory and the Hydrosense II was used to determine the soil moisture content in the topsoil. Penetration results show that the tree shelter is the most compacted and the open field area

  5. Spatial variability of some soil properties varies in oil palm (Elaeis guineensis Jacq.) plantations of west coastal area of India

    Science.gov (United States)

    Behera, Sanjib Kumar; Suresh, Kancherla; Narsimha Rao, Bezawada; Mathur, Ravi Kumar; Shukla, Arvind Kumar; Manorama, Kamireddy; Ramachandrudu, Kummari; Harinarayana, Parasa; Prakash, Chandra

    2016-06-01

    Mapping spatial variability of soil properties is the key to efficient soil resource management for sustainable crop yield. Therefore, the present study was conducted to assess the spatial variability of soil properties such as acidity (pH), salinity (electrical conductivity (EC)), organic carbon, available K, available P, exchangeable Ca2+, exchangeable Mg2+, available S and hot water soluble B in surface (0-20 cm) and subsurface (20-40 cm) soil layers of oil palm plantations in south Goa district of Goa located in west coastal area of India. A total of 128 soil samples were collected from 64 oil palm plantations of Goa located at an approximate interval of 1-2 km and analyzed. Soil was acidic to neutral in reaction. Other soil properties varied widely in both the soil layers. Correlations between soil pH and exchangeable Ca2+, between soil EC and available K, between available P and available S and between exchangeable Ca2+ and exchangeable Mg2+ in both the soil layers were found to be positive and significant (P < 0.01). Geostatistical analysis revealed a varied spatial distribution pattern for the measured soil properties. Best-fit models for measured soil properties were exponential, Gaussian, stable, K-Bessel and spherical with moderate to strong spatial dependency. The results revealed that site-specific fertilizer management options needed to be adopted in the oil palm plantations of the study area owing to variability in soil properties.

  6. Effect of Soil Erosion on Soil Properties and Crop Yields on Slopes in the Sichuan Basin, China

    Institute of Scientific and Technical Information of China (English)

    SU Zheng-An; ZHANG Jian-Hui; NIE Xiao-Jun

    2010-01-01

    Roles of tillage erosion and water erosion in the development of within-field spatial variation of surface soil properties and soil degradation and their contributions to the reduction of crop yields were studied on three linear slopes in the Sichuan Basin,southwestern China.Tillage erosion was found to be the dominant erosion process at upper slope positions of each linear slope and on the whole short slope (20 m).On the long slope (110 m) and medium slope (40 m),watererosion was the dominant erosion process.Soil organic matter and soil nutrients in the tillage layer were significantly related to slope length and 137Cs inventories on the long slope;however,there was no significant correlation among themon the short slope,suggesting that water erosion lowered soil quality by transporting SOM and surface soil nutrients selectively from the upper to lower slope positions,while tillage erosion transported soil materials unselectively.On the medium slope,SOM,total N,and available N in the tillage layer were correlated with slope length and the other properties were distributed evenly on the slope,indicating that water erosion on this slope was still the dominant soil redistribution process.Similar patterns were found for the responses of grain yield,aboveground biomaas,and harvest index for slopes.These results indicated that tillage erosion was a major cause for soil degradation and grain yield reduction on the linear slopes because it resulted in displacement of the tillage layer soil required for maintaining soil quality and plant growth.

  7. Changes in forest soil properties in different successional stages in lower tropical China.

    Directory of Open Access Journals (Sweden)

    Yuelin Li

    Full Text Available BACKGROUND: Natural forest succession often affects soil physical and chemical properties. Selected physical and chemical soil properties were studied in an old-growth forest across a forest successional series in Dinghushan Nature Reserve, Southern China. METHODOLOGY/PRINCIPAL FINDINGS: The aim was to assess the effects of forest succession change on soil properties. Soil samples (0-20 cm depth were collected from three forest types at different succession stages, namely pine (Pinus massoniana forest (PMF, mixed pine and broadleaf forest (PBMF and monsoon evergreen broadleaf forest (MEBF, representing early, middle and advanced successional stages respectively. The soil samples were analyzed for soil water storage (SWS, soil organic matter (SOM, soil microbial biomass carbon (SMBC, pH, NH4(+-N, available potassium (K, available phosphorus (P and microelements (available copper (Cu, available zinc (Zn, available iron (Fe and available boron (B between 1999 and 2009. The results showed that SWS, SOM, SMBC, Cu, Zn, Fe and B concentrations were higher in the advanced successional stage (MEBF stage. Conversely, P and pH were lower in the MEBF but higher in the PMF (early successional stage. pH, NH4(+-N, P and K declined while SOM, Zn, Cu, Fe and B increased with increasing forest age. Soil pH was lower than 4.5 in the three forest types, indicating that the surface soil was acidic, a stable trend in Dinghushan. CONCLUSION/SIGNIFICANCE: These findings demonstrated significant impacts of natural succession in an old-growth forest on the surface soil nutrient properties and organic matter. Changes in soil properties along the forest succession gradient may be a useful index for evaluating the successional stages of the subtropical forests. We caution that our inferences are drawn from a pseudo-replicated chronosequence, as true replicates were difficult to find. Further studies are needed to draw rigorous conclusions regarding on nutrient dynamics in

  8. Multiscale analysis of surface soil moisture dynamics in a mesoscale catchment utilizing an integrated ecohydrological model

    Science.gov (United States)

    Korres, W.; Reichenau, T. G.; Schneider, K.

    2012-12-01

    moisture remained in contrast to the measurements very responsive to precipitation with high soil moisture after precipitation events. This behavior indicates that the soil properties might have changed due to the formation of a surface crust or seal towards the end of the growing season. Spatial soil moisture patterns were investigated using a grid resolution of 150 meter. Spatial autocorrelation was computed on a daily basis using patterns of soil texture as well as transpiration and precipitation indices as co-variables. Spatial patterns of surface soil moisture are mostly determined by the structure of the soil properties (soil type) during winter, early growing season and after harvest of all crops. Later in the growing season, after establishment of a closed canopy the dependence of the soil moisture patterns on soil texture patterns becomes smaller and diminishes quickly after precipitation events, due to differences of the transpiration rate of the different crops. When changing the spatial scale of the analysis, the highest autocorrelation values can be found on a grid cell size between 450 and 1200 meters. Thus, small scale variability of transpiration induced by the land use pattern almost averages out, leaving the larger scale structure of soil properties to explain the soil moisture patterns.

  9. Wildfire effects on biological properties of soils in forest-steppe ecosystems of Russia

    Directory of Open Access Journals (Sweden)

    E. Maksimova

    2014-01-01

    Full Text Available Soils affected by forest wildfires in 2010 in Russia were studied on postfire and mature plots near the Togljatty city, Samara region. Soil biological properties and ash composition dynamics were investigated under the forest fire affect: a place of local forest fire, riding forest fire and unaffected site by fire-control (mature during 3 yr of restoration. Soil samples were collected at 0–15 cm. Soil biological properties was measured by the fumigation method. The analytical data obtained shows that wildfires lead to serious changes in a soil profile and soil chemistry of upper horizons. Wildfires change a chemical composition of soil horizons and increase their ash-content. Fires lead to accumulation of biogenic elements' content (P and K in the solum fine earth. Calcium content is increased as a result of fires that leads to an alkaline pH of the solum. The values of nutrients decreased as a result of leaching out with an atmospheric precipitation during the second year of restoration. Thus, when the upper horizons are burning the ash arriving on a soil surface enrich it with nutrients. The mature (unaffected by fire soils is characterized by the greatest values of soil microbial biomass in the top horizon and, respectively, the bigger values of basal respiration whereas declining of the both parameters was revealed on postfire soils. Nevertheless this influence does not extend on depth more than 10 cm. Thus, fire affect on the soil were recognized in decreasing of microbiological activity.

  10. Analysis of surface soil moisture patterns in agricultural landscapes using empirical orthogonal functions

    Directory of Open Access Journals (Sweden)

    W. Korres

    2009-08-01

    Full Text Available Soil moisture is one of the fundamental variables in hydrology, meteorology and agriculture. Nevertheless, its spatio-temporal patterns in agriculturally used landscapes affected by multiple natural (rainfall, soil, topography etc. and agronomic (fertilisation, soil management etc. factors are often not well known. The aim of this study is to determine the dominant factors governing the spatio-temporal patterns of surface soil moisture in a grassland and an arable land test site within the Rur catchment in Western Germany. Surface soil moisture (0–6 cm has been measured in an approx. 50×50 m grid at 14 and 17 dates (May 2007 to November 2008 in both test sites. To analyse spatio-temporal patterns of surface soil moisture, an Empirical Orthogonal Function (EOF analysis was applied and the results were correlated with parameters derived from topography, soil, vegetation and land management to connect the pattern to related factors and processes. For the grassland test site, the analysis results in one significant spatial structure (first EOF, which explains about 57.5% of the spatial variability connected to soil properties and topography. The weight of the first spatial EOF is stronger on wet days. The highest temporal variability can be found in locations with a high percentage of soil organic carbon (SOC. For the arable land test site, the analysis yields two significant spatial structures, the first EOF, explaining 38.4% of the spatial variability, shows a highly significant correlation to soil properties, namely soil texture. The second EOF, explaining 28.3% of the spatial variability, is connected to differences in land management. The soil moisture in the arable land test site varies more during dry and wet periods on locations with low porosity.

  11. IMPACT OF OIL ON THE MECHANICAL PROPERTIES OF SOIL SUBSIDENCE

    Directory of Open Access Journals (Sweden)

    Алексей Алексеевич Бурцев

    2016-08-01

    Full Text Available The paper studied the effect of oil content on the mechanical properties of soil subsidence - Ek modulus and compressibility factor m0, obtained in the laboratory with the help of artificial impregnation oil soil samples. A comparison of the above parameters with samples of the same soil in the natural and water-saturated conditions has been perfomed.

  12. Linkages between aggregate formation, porosity and soil chemical properties

    NARCIS (Netherlands)

    Regelink, I.C.; Stoof, C.R.; Rousseva, S.; Weng, L.; Lair, G.J.; Kram, P.; Nikolaidis, N.P.; Kercheva, M.; Banwart, S.; Comans, R.N.J.

    2015-01-01

    Linkages between soil structure and physical–chemical soil properties are still poorly understood due to the wide size-range at which aggregation occurs and the variety of aggregation factors involved. To improve understanding of these processes, we collected data on aggregate fractions, soil

  13. Surface property modification of silicon

    Science.gov (United States)

    Danyluk, S.

    1984-01-01

    The main emphasis of this work has been to determine the wear rate of silicon in fluid environments and the parameters that influence wear. Three tests were carried out on single crystal Czochralski silicon wafers: circular and linear multiple-scratch tests in fluids by a pyramidal diamond simulated fixed-particle abrasion; microhardness and three-point bend tests were used to determine the hardness and fracture toughness of abraded silicon and the extent of damage induced by abrasion. The wear rate of (100) and (111) n and p-type single crystal Cz silicon abraded by a pyramidal diamond in ethanol, methanol, acetone and de-ionized water was determined by measuring the cross-sectional areas of grooves of the circular and linear multiple-scratch tests. The wear rate depends on the loads on the diamond and is highest for ethanol and lowest for de-ionized water. The surface morphology of the grooves showed lateral and median cracks as well as a plastically deformed region. The hardness and fracture toughness are critical parameters that influence the wear rate. Microhardness tests were conducted to determine the hardness as influenced by fluids. Median cracks and the damage zone surrounding the indentations were also related to the fluid properties.

  14. Reflectance anisotropy for characterising fine-scale changes in soil surface condition across different soil types

    Science.gov (United States)

    Croft, Holly; Anderson, Karen; Kuhn, Nikolaus J.

    2010-05-01

    Soils can experience rapid structural degradation in response to land cover changes, resulting in a reduction in soil productivity, an increased susceptibility to erosion and increased release of greenhouse gases. Soil surface roughness at the centimetre scale plays a fundamental role in affecting soil erosion and surface runoff pathways. A decline in surface roughness can also be used to infer soil degradation as soil aggregates are broken down through raindrop impact. However, due to the time and resources involved in using traditional field sampling techniques, there is a lack of spatially-distributed information on soil surface condition. Remotely sensed data can provide a cost-effective means of monitoring changes in soil surface condition over broad spatial extents. Furthermore, a growing recognition into the importance of the directional reflectance domain has led to an increasing number of satellites with multiple view angle (MVA) capabilities (e.g. MISR, CHRIS on Proba). This is potentially useful for monitoring soil degradation and susceptibility to erosion because changes in soil surface roughness, associated with the breakdown of macro-aggregates, have a measurable effect on directional reflectance factors. Consequently, field and laboratory data are required for an empirical understanding of soil directional reflectance characteristics, underpinning subsequent model development. This study assessed the extent to which a hyperspectral MVA approach (350-2500 nm) could detect fine-scale changes in soil crusting states across five different soil types. A series of soil crusting states were produced for all five soil types, using an artificial rainfall simulator. The controlled conditions allowed the production of a series of stages in the soil crusting process; showing progressively declining surface roughness values. Each soil state was then spatially characterised, using a laboratory laser device at 2 mm sample spacing, over a 10 x 10 cm area. Laser data

  15. Effects of Grazing Sorghum Stubble on Soil Physical Properties and Subsequent Crop Performance

    Directory of Open Access Journals (Sweden)

    B. J. Radford

    2008-01-01

    Full Text Available Two grazing trials were conducted on a Vertosol in central Queensland to assess the effects of stubble grazing by cattle on soil properties and subsequent crop performance. Two adjacent contour bays were selected for two treatments (grazed and ungrazed in each trial. Both trials were conducted following a grain sorghum crop. In trial 1 (during 1996 the surface soil was dry throughout grazing. In trial 2 (during 1998 the surface soil became saturated during grazing after 125 mm of rain. Soil physical properties including bulk density, shear strength, cone index and hydraulic conductivity were measured pre-and post-grazing in both trials and the response of wheat crops sown after grazing was assessed. The area was then double-cropped to sorghum to measure any further residual impacts. After grazing on dry soil, hoof marks were barely evident and no significant change was found in any soil physical property or the establishment or yield of a subsequent wheat crop. After grazing on saturated soil, there were visible hoof marks 49 mm deep and increases in soil shear strength, cone index and drawbar power requirement. The following wheat crop had reduced dry matter at 32 days and reduced grain yield. There was no immediate change in ground cover and no effect on wheat establishment following direct-drilling 37 days after the cattle were removed. In a sorghum crop following the wheat crop, there were no carryover effects on any soil physical property or on crop yield. We conclude that under a similar regime to that of trial 1 (dry soil and no rainfall during grazing, adverse effects of stubble grazing are unlikely. It follows that if grazing can be restricted to times when the surface soil is dry enough to minimise compaction by animals, there is little risk of adverse effects on subsequent crop performance.

  16. Visually assessing the level of development and soil surface stability of cyanobacterially dominated biological soil crusts

    Science.gov (United States)

    Belnap, J.; Phillips, S.L.; Witwicki, D.L.; Miller, M.E.

    2008-01-01

    Biological soil crusts (BSCs) are an integral part of dryland ecosystems and often included in long-term ecological monitoring programs. Estimating moss and lichen cover is fairly easy and non-destructive, but documenting cyanobacterial level of development (LOD) is more difficult. It requires sample collection for laboratory analysis, which causes soil surface disturbance. Assessing soil surface stability also requires surface disturbance. Here we present a visual technique to assess cyanobacterial LOD and soil surface stability. We define six development levels of cyanobacterially dominated soils based on soil surface darkness. We sampled chlorophyll a concentrations (the most common way of assessing cyanobacterial biomass), exopolysaccharide concentrations, and soil surface aggregate stability from representative areas of each LOD class. We found that, in the laboratory and field, LOD classes were effective at predicting chlorophyll a soil concentrations (R2=68-81%), exopolysaccharide concentrations (R2=71%), and soil aggregate stability (R2=77%). We took representative photos of these classes to construct a field guide. We then tested the ability of field crews to distinguish these classes and found this technique was highly repeatable among observers. We also discuss how to adjust this index for the different types of BSCs found in various dryland regions.

  17. Soil erosion and soil properties in,reclaimed forestland of loess hilly region

    Institute of Scientific and Technical Information of China (English)

    ZHAXiaochun; TANGKeli

    2003-01-01

    Based on data observed from 1989 to 1998 in the Ziwuling survey station, changes of soil erosion and soil physico-mechanical properties were studied after forestland reclamation. When the man-induced factors changed the eco-environment by reclaiming forestlands, the intensity of man-made soil erosion in reclaimed lands was 1,000 times more than that of natural erosion in forestlands. From the analysis of soil physical and mechanical properties, the clay content and physical clay content decreased 2.74% and 3.01% respectively, and the >0.25 mm water stable aggregate content decreased 58.7%, the soil unit weight increased and the soil shear strength decreased, all of which were easier to cause soil erosion. The results of the correlation analysis showed that the >0.25 mm water stable aggregate content was the greatest influencing factor on soil erosion, the partial correlated coefficient was 0.9728, and then were soil coarse grain and soil shear strength, the partial correlated coefficients being 0.8879 and 0.6020 respectively. The relationships between the >0.25 mm water stable aggregate content, the soil sheer strength and the soil erosion intensity were analyzed, which showed that the first and seventh years were the turning years of the soil erosion intensity after the forestland reclamation. The degenerative eroded soil and eco-environrnent formed the peculiar erosion environment, which aggravated the soil erogion rapidly.

  18. Biological and biochemical properties in evaluation of forest soil quality

    OpenAIRE

    Błońska Ewa; Lasota Jarosław

    2014-01-01

    The aim of this study was to assess the possibility of using biological and biochemical parameters in the evaluation of forest soil quality and changes caused by land use. The study attempted to determine a relationship between the enzymatic activity of soil, the number of earthworms and soil physico-chemical properties. The study was carried out in central Poland in adjoining Forest Districts (Przedbórz and Smardzewice). In soil samples taken from 12 research plots, basic physico-chemical pr...

  19. Biological and biochemical properties in evaluation of forest soil quality

    OpenAIRE

    Błońska, Ewa; Lasota, Jarosław

    2014-01-01

    The aim of this study was to assess the possibility of using biological and biochemical parameters in the evaluation of forest soil quality and changes caused by land use. The study attempted to determine a relationship between the enzymatic activity of soil, the number of earthworms and soil physico-chemical properties. The study was carried out in central Poland in adjoining Forest Districts (Przedbórz and Smardzewice). In soil samples taken from 12 research plots, basic physico-chem...

  20. Physico-chemical properties and fertility status of water eroded soils of Sharkul area of district Mansehra, Pakistan

    Directory of Open Access Journals (Sweden)

    Farmanullah Khan, A. Iqbal

    2011-11-01

    Full Text Available Soil degradation is the major threat to agricultural sustainability because it affects the soil productivity. Present study was conducted in 2008 to evaluate physico-chemical properties and fertility status of some eroded soil series of Sharkul area district Manshera, Hazara division, Khyber Pakhtunkhwa, Pakistan. Six soil series including slightly eroded (Dosera and Girari, moderately eroded (Nakholi and Sharkul and severely eroded (Ahl and Banser were selected. Soil samples were collected from surface (0-15 cm, subsurface (30-45 cm and substrata soil (60-75cm depths and were analyzed for various soil properties. Due to severity of erosion, bulk density increased, while total porosity, saturation percentage and organic matter decreased significantly. AB-DTPA extractable P, K, Fe, Cu, Zn, and Mn concentrations were decreased due to the severity of erosion in surface and sub surface soils, whereas in the substrata soils (60-75 cm depth, the effect of erosion was almost non significant. Sub-surface and sub-strata soils were found deficient in available P ( Zn > Fe > Mn. The physical and chemical properties of eroded soils varied significantly and the increasing severity of erosion resulted in corresponding deterioration of soil quality.

  1. Liquid Spills on Permeable Soil Surfaces: Experimental Confirmations

    Energy Technology Data Exchange (ETDEWEB)

    Simmons, Carver S.; Keller, Jason M.

    2005-09-29

    Predictive tools for assessing the quantity of a spill on a soil from the observed spreading area could contribute to improving remediation when it is necessary. On a permeable soil, the visible spill area only hints about the amount of liquid that might reside below the surface. An understanding of the physical phenomena involved with spill propagation on a soil surface is key to assessing the liquid amount possibly present beneath the surface. The objective of this study is an improved prediction capability for spill behavior.

  2. Influence of relief and vegetation on soil properties in a disturbed chernozem soil landscape

    Science.gov (United States)

    Raab, Thomas; Hirsch, Florian; Vasserman, Oleksandr; Raab, Alexandra; Naeth, Anne

    2017-04-01

    In central and southeastern Alberta, chernozems dominate the soil landscape and are divided into several groups that follow the climate gradient from Northwest to Southeast: Dark Grey Chernozems, Black Chernozems, Dark Brown Chernozems; Brown Chernozems. Principles controlling development and distribution of these chernozem subtypes along the ecotone transect are quite well known. However, intensive land use over the last century has affected soils that originally have formed under natural conditions during the Holocene in more than 10,000 years. There is a lack of knowledge regarding soil development in these landscapes on the decadal to centennial time scale. Within this time frame the most important factor of soil formation may be relief, although this has not been properly studied. This study aims to compare soil properties in a typical chernozem landscape where soils have been highly disturbed and parent materials have been re-arranged by surface coal mining. We hypothesize that within 50 years, soils develop with significant differences based on vegetation type and slope aspect. Our study site is the former Diplomat Mine near Forestburg, Alberta where spoils form a small scale ridge and graben topography. The south facing slopes of the piles are covered by grassland, whereas on the north exposition has trees and shrubs. Samples were taken from six sites with differences in topography and vegetation type. Diplomate T1 is at the top of the ridge with grassland, Diplomate S1 is on the southern slope with grassland, Diplomate N1 is on the northern slope with trees, and Diplomate N2 is on the northern slope with shrubs. For comparison we took samples from two sites without slope aspect. One site was an undisturbed grassland (Diplomate Z1) and the other sites were reclaimed piles (Diplomate R1). At each site, five soil profiles were examined and volumetrically sampled (250 cm3 steel ring) in steps of five centimeters to a depth of 30 centimeters. We present first

  3. Beneath aggregate stability - quantifying thermodynamic properties that drive soil structure dynamics

    Science.gov (United States)

    Hallett, Paul; Ogden, Mike; Karim, Kamal; Schmidt, Sonja; Yoshida, Shuichiro

    2014-05-01

    Soil aggregates are a figment of your energy input and initial boundary conditions, so the basic thermodynamics that drive soil structure formation are needed to understand soil structure dynamics. Using approaches from engineering and materials science, it is possible quantify basic thermodynamic properties, but at present tests are generally limited to highly simplified, often remoulded, soil structures. Although this presents limitations, the understanding of underlying processes driving soil structure dynamics is poor, which could be argued is due to the enormity of the challenge of such an incredibly complex system. Other areas of soil science, particularly soil water physics, relied on simplified structures to develop theories that can now be applied to more complex pore structures. We argue that a similar approach needs to gain prominence in the study of soil aggregates. An overview will be provided of approaches adapted from other disciplines to quantify particle bonding, fracture resistance, rheology and capillary cohesion of soil that drive its aggregation and structure dynamics. All of the tests are limited as they require simplified soil structures, ranging from repacked soils to flat surfaces coated with mineral particles. A brief summary of the different approaches will demonstrate the benefits of collecting basic physical data relevant to soil structure dynamics, including examples where they are vital components of models. The soil treatments we have tested with these engineering and materials science approaches include field soils from a range of management practices with differing clay and organic matters contents, amendment and incubation of soils with a range of microorganisms and substrates in the laboratory, model clay-sand mixes and planar mineral surfaces with different topologies. In addition to advocating the wider adoption of these approaches, we will discuss limitations and hope to stimulate discussion on how approaches could be improved

  4. Key soil functional properties affected by soil organic matter - evidence from published literature

    Science.gov (United States)

    Murphy, Brian

    2015-07-01

    The effect of varying the amount of soil organic matter on a range of individual soil properties was investigated using a literature search of published information largely from Australia, but also included relevant information from overseas. Based on published pedotransfer functions, soil organic matter was shown to increase plant available water by 2 to 3 mm per 10 cm for each 1% increase in soil organic carbon, with the largest increases being associated with sandy soils. Aggregate stability increased with increasing soil organic carbon, with aggregate stability decreasing rapidly when soil organic carbon fell below 1.2 to 1.5 5%. Soil compactibility, friability and soil erodibility were favourably improved by increasing the levels of soil organic carbon. Nutrient cycling was a major function of soil organic matter. Substantial amounts of N, P and S become available to plants when the soil organic matter is mineralised. Soil organic matter also provides a food source for the microorganisms involved in the nutrient cycling of N, P, S and K. In soils with lower clay contents, and less active clays such as kaolinites, soil organic matter can supply a significant amount of the cation exchange capacity and buffering capacity against acidification. Soil organic matter can have a cation exchange capacity of 172 to 297 cmol(+)/kg. As the cation exchange capacity of soil organic matter varies with pH, the effectiveness of soil organic matter to contribute to cation exchange capacity below pH 5.5 is often minimal. Overall soil organic matter has the potential to affect a range of functional soil properties.

  5. The influence of Alpine soil properties on shallow movement hazards, investigated through factor analysis

    Directory of Open Access Journals (Sweden)

    S. Stanchi

    2012-06-01

    Full Text Available Mountain watersheds are particularly vulnerable to extreme meteorological events, such as high intensity rainfall, and mountain soils often show pronounced fragility and low resilience due to severe environmental conditions. Alpine soil vulnerability is partly intrinsic but in part related to climate change (mainly precipitation regimes, and is enhanced by the abandonment of rural mountain areas that reduced the land maintenance actions traditionally carried out by farmers and local populations in the past. Soil hazards are related to different processes such as water erosion, loss of consistency, surface runoff and sediment transport, often occurring simultaneously and interacting with each other. Therefore, the overall effects on soil are not easy to quantify as they can be evaluated from different soil chemical and physical properties, referring to specific soil loss phenomena such as soil erosion, soil liquefaction, loss of consistency etc. In this study, we focus our attention on a mountain region in the NW Italian Alps (Valle d'Aosta, which suffered from diffuse soil instability phenomena in recent years, as a consequence of extreme rainfall events and general abandonment of the agricultural activities in marginal areas. The main effects were a large number of shallow landislides involving limited soil depths (less than 1 m, affecting considerable surfaces in the lower and middle part of the slopes. These events caused loss of human lives in the year 2000 and therefore raised the attention on land maintenance issues. Surface (topsoil: 0–20 cm and subsurface (subsoil: 20–70 cm samples were characterised chemically and physically (pH, carbon and nitrogen contents, cation exchange capacity, texture, aggregate stability, Atterberg limits etc. and they showed very different soil properties. Topsoils were characterised by better stability, structure, and consistency. The differences between the two depths were potential trigger factors for

  6. Estimation of Korean paddy field soil properties using optical reflectance

    Science.gov (United States)

    An optical sensing approach based on diffuse reflectance has shown potential for rapid and reliable on-site estimation of soil properties. Important sensing ranges and the resulting regression models useful for soil property estimation have been reported. In this study, a similar approach was applie...

  7. Estimation of soil physical properties from sensor-based soil strength and apparent electrical conductivity

    Science.gov (United States)

    Quantification of soil physical properties has traditionally been through soil sampling and laboratory analyses, which is time-, cost-, and labor-consuming, making it difficult to obtain the spatially-dense data required for precision agriculture. Soil strength and apparent electrical conductivity (...

  8. Inversion of soil electrical conductivity data to estimate layered soil properties

    Science.gov (United States)

    CBulk apparent soil electrical conductivity (ECa) sensors respond to multiple soil properties, including clay content, water content, and salt content (i.e., salinity). They provide a single sensor value for an entire soil profile down to a sensor-dependent measurement depth, weighted by a nonlinear...

  9. Soil physical property estimation from soil strength and apparent electrical conductivity sensor data

    Science.gov (United States)

    Quantification of soil physical properties through soil sampling and laboratory analyses is time-, cost-, and labor-consuming, making it difficult to obtain the spatially-dense data required for precision agriculture. Proximal soil sensing is an attractive alternative, but many currently available s...

  10. Effect of Vegetation Patterns on SAR derived Surface Soil Moisture Distribution

    Science.gov (United States)

    Koyama, C. N.; Schneider, K.

    2012-12-01

    Soil moisture can be regarded as one of the important life sustaining entities on our planet. Among its various functions, the first is probably to enable the growth of vegetation on the land surface. Apart from this, water stored in soils plays many other important roles in the global water (and energy) cycle. In the past decades, radar imaging has proven its potential to quantitatively estimate the near surface water content of soils at high spatial resolutions. The use of active microwave data to measure surface soil moisture requires the consideration of several factors like e.g. soil texture, surface roughness, and vegetation. Among these factors, the presence of a vegetation cover is perhaps the major impediment to accurate quantitative retrievals of soil moisture. On the one hand, the vegetation has a disturbing effect on the radar reflectivity and thus causes errors in the soil moisture retrieval which is generally based on theoretical or experimental relationships between the dielectric properties of the soil surface and the radar backscattering coefficient. On the other hand, the spatial distribution of vegetation with e.g. different crop types with different transpiration coefficients and different phenological development, etc, can cause large variations in the plant water consumption and thus has a significant impact on the soil moisture patterns. We have developed methods to estimate the amount of biomass for different crop types and the underlying surface soil water content directly from polarimetric L-band SAR images. While the horizontally-transmit horizontally-receive co-polarization (hh) is most sensitive towards the dielectric soil properties, the horizontally-transmit vertically-receive cross-polarization (hv) is much more sensitive towards the backscattering from the vegetation canopy. In addition the polarimetric observables entropy (H), alpha angle (α), and the total reflected power (span), all of which are highly affected by the canopy

  11. Soil Surface Sealing Effect on Soil Moisture at a Semiarid Hillslope: Implications for Remote Sensing Estimation

    Directory of Open Access Journals (Sweden)

    Shai Sela

    2014-08-01

    Full Text Available Robust estimation of soil moisture using microwave remote sensing depends on extensive ground sampling for calibration and validation of the data. Soil surface sealing is a frequent phenomenon in dry environments. It modulates soil moisture close to the soil surface and, thus, has the potential to affect the retrieval of soil moisture from microwave remote sensing and the validation of these data based on ground observations. We addressed this issue using a physically-based modeling approach that accounts explicitly for surface sealing at the hillslope scale. Simulated mean soil moisture at the respective layers corresponding to both the ground validation probe and the radar beam’s typical effective penetration depth were considered. A cyclic pattern was found in which, as compared to an unsealed profile, the seal layer intensifies the bias in validation during rainfall events and substantially reduces it during subsequent drying periods. The analysis of this cyclic pattern showed that, accounting for soil moisture dynamics at the soil surface, the optimal time for soil sampling following a rainfall event is a few hours in the case of an unsealed system and a few days in the case of a sealed one. Surface sealing was found to increase the temporal stability of soil moisture. In both sealed and unsealed systems, the greatest temporal stability was observed at positions with moderate slope inclination. Soil porosity was the best predictor of soil moisture temporal stability, indicating that prior knowledge regarding the soil texture distribution is crucial for the application of remote sensing validation schemes.

  12. Updated global soil map for the Weather Research and Forecasting model and soil moisture initialization for the Noah land surface model

    Science.gov (United States)

    DY, C. Y.; Fung, J. C. H.

    2016-08-01

    A meteorological model requires accurate initial conditions and boundary conditions to obtain realistic numerical weather predictions. The land surface controls the surface heat and moisture exchanges, which can be determined by the physical properties of the soil and soil state variables, subsequently exerting an effect on the boundary layer meteorology. The initial and boundary conditions of soil moisture are currently obtained via National Centers for Environmental Prediction FNL (Final) Operational Global Analysis data, which are collected operationally in 1° by 1° resolutions every 6 h. Another input to the model is the soil map generated by the Food and Agriculture Organization of the United Nations - United Nations Educational, Scientific and Cultural Organization (FAO-UNESCO) soil database, which combines several soil surveys from around the world. Both soil moisture from the FNL analysis data and the default soil map lack accuracy and feature coarse resolutions, particularly for certain areas of China. In this study, we update the global soil map with data from Beijing Normal University in 1 km by 1 km grids and propose an alternative method of soil moisture initialization. Simulations of the Weather Research and Forecasting model show that spinning-up the soil moisture improves near-surface temperature and relative humidity prediction using different types of soil moisture initialization. Explanations of that improvement and improvement of the planetary boundary layer height in performing process analysis are provided.

  13. Using Remotely-Sensed Estimates of Soil Moisture to Infer Soil Texture and Hydraulic Properties across a Semi-arid Watershed

    Science.gov (United States)

    Santanello, Joseph A.; Peters-Lidard, Christa D.; Garcia, Matthew E.; Mocko, David M.; Tischler, Michael A.; Moran, M. Susan; Thoma, D. P.

    2007-01-01

    Near-surface soil moisture is a critical component of land surface energy and water balance studies encompassing a wide range of disciplines. However, the processes of infiltration, runoff, and evapotranspiration in the vadose zone of the soil are not easy to quantify or predict because of the difficulty in accurately representing soil texture and hydraulic properties in land surface models. This study approaches the problem of parameterizing soils from a unique perspective based on components originally developed for operational estimation of soil moisture for mobility assessments. Estimates of near-surface soil moisture derived from passive (L-band) microwave remote sensing were acquired on six dates during the Monsoon '90 experiment in southeastern Arizona, and used to calibrate hydraulic properties in an offline land surface model and infer information on the soil conditions of the region. Specifically, a robust parameter estimation tool (PEST) was used to calibrate the Noah land surface model and run at very high spatial resolution across the Walnut Gulch Experimental Watershed. Errors in simulated versus observed soil moisture were minimized by adjusting the soil texture, which in turn controls the hydraulic properties through the use of pedotransfer functions. By estimating a continuous range of widely applicable soil properties such as sand, silt, and clay percentages rather than applying rigid soil texture classes, lookup tables, or large parameter sets as in previous studies, the physical accuracy and consistency of the resulting soils could then be assessed. In addition, the sensitivity of this calibration method to the number and timing of microwave retrievals is determined in relation to the temporal patterns in precipitation and soil drying. The resultant soil properties were applied to an extended time period demonstrating the improvement in simulated soil moisture over that using default or county-level soil parameters. The methodology is also

  14. The effect of heterogeneity and surface roughness on soil hydrophobicity

    Science.gov (United States)

    Hallin, I.; Bryant, R.; Doerr, S. H.; Douglas, P.

    2010-05-01

    Soil water repellency, or hydrophobicity, can develop under both natural and anthropogenic conditions. Forest fires, vegetation decomposition, microbial activity and oil spills can all promote hydrophobic behaviour in surrounding soils. Hydrophobicity can stabilize soil organic matter pools and decrease evapotranspiration, but there are many negative impacts of hydrophobicity as well: increased erosion of topsoil, an increasingly scarce resource; increased runoff, which can lead to flooding; and decreased infiltration, which directly affects plant health. The degree of hydrophobicity expressed by soil can vary greatly within a small area, depending partly on the type and severity of the disturbance as well as on temporal factors such as water content and microbial activity. To date, many laboratory investigations into soil hydrophobicity have focused on smooth particle surfaces. As a result, our understanding of how hydrophobicity develops on rough surfaces of macro, micro and nano-particulates is limited; we are unable to predict with certainty how these soil particles will behave on contact with water. Surface chemistry is the main consideration when predicting hydrophobic behaviour of smooth solids, but for particles with rough surfaces, hydrophobicity is believed to develop as a combination of surface chemistry and topography. Topography may reflect both the arrangement (aggregation) of soil particles and the distribution of materials adsorbed on particulate surfaces. Patch-wise or complete coverage of rough soil particles by hydrophobic material may result in solid/water contact angles ≥150° , at which point the soil may be classified as super-hydrophobic. Here we present a critical review of the research to date on the effects of heterogeneity and surface roughness on soil hydrophobicity in which we discuss recent advances, current trends, and future research areas. References: Callies, M., Y. Chen, F. Marty, A. Pépin and D. Quéré. 2005. Microfabricated

  15. The effect of various long-term tillage systems on soil properties and spring barley yield

    OpenAIRE

    MALECKA, Irena; Blecharczyk, Andrzej; SAWINSKA, Zuzanna; DOBRZENIECKI, Tomasz

    2012-01-01

    This study, performed on a soil that is classified as Albic Luvisols that developed on loamy sands overlying loamy material (1.4% organic matter and pH 6.5), concerns the impact of tillage systems on soil properties and the yield of spring barley. The experiment design included 3 tillage systems: conventional tillage, reduced tillage, and no-tillage. Continuous cultivation for 7 consecutive years by reduced tillage and no-tillage led to changes in the physical properties of the surface soil l...

  16. [Relationship among soil enzyme activities, vegetation state, and soil chemical properties of coal cinder yard].

    Science.gov (United States)

    Wang, Youbao; Zhang, Li; Liu, Dengyi

    2003-01-01

    From field investigation and laboratory analysis, the relationships among soil enzyme activities, vegetation state and soil chemical properties of coal cinder yard in thermal power station were studied. The results showed that vegetation on coal cinder yard was distributed in scattered patch mainly with single species of plant, and herbs were the dominant species. At the same time, the activity of three soil enzymes had a stronger relativity to environment conditions, such as vegetation state and soil chemical properties. The sensitivity of three soil enzymes to environmental stress was in order of urease > sucrase > catalase. The relativity of three soil enzymes to environmental factor was in order of sucrase > urease > catalase. Because of urease being the most susceptible enzyme to environmental conditions, and it was marked or utmost marked interrelated with vegetation state and soil chemical properties, urease activity could be used as an indicator for the reclamation of wasteland.

  17. A non-destructive method to measure the thermal properties of frozen soils during phase transition

    Institute of Scientific and Technical Information of China (English)

    Bin Zhang; Chanjuan Han; Xiong Bill Yu

    2015-01-01

    Frozen soils cover about 40%of the land surface on the earth and are responsible for the global energy balances affecting the climate. Measurement of the thermal properties of frozen soils during phase transition is important for analyzing the thermal transport process. Due to the involvement of phase transition, the thermal properties of frozen soils are rather complex. This paper introduces the uses of a multifunctional instrument that integrates time domain reflectometry (TDR) sensor and thermal pulse technology (TPT) to measure the thermal properties of soil during phase transition. With this method, the extent of phase transition (freezing/thawing) was measured with the TDR module; and the corre-sponding thermal properties were measured with the TPT module. Therefore, the variation of thermal properties with the extent of freezing/thawing can be obtained. Wet soils were used to demonstrate the performance of this measurement method. The performance of individual modules was first validated with designed experiments. The new sensor was then used to monitor the properties of soils during freezingethawing process, from which the freezing/thawing degree and thermal properties were simultaneously measured. The results are consistent with documented trends of thermal properties variations.

  18. A non-destructive method to measure the thermal properties of frozen soils during phase transition

    Directory of Open Access Journals (Sweden)

    Bin Zhang

    2015-04-01

    Full Text Available Frozen soils cover about 40% of the land surface on the earth and are responsible for the global energy balances affecting the climate. Measurement of the thermal properties of frozen soils during phase transition is important for analyzing the thermal transport process. Due to the involvement of phase transition, the thermal properties of frozen soils are rather complex. This paper introduces the uses of a multifunctional instrument that integrates time domain reflectometry (TDR sensor and thermal pulse technology (TPT to measure the thermal properties of soil during phase transition. With this method, the extent of phase transition (freezing/thawing was measured with the TDR module; and the corresponding thermal properties were measured with the TPT module. Therefore, the variation of thermal properties with the extent of freezing/thawing can be obtained. Wet soils were used to demonstrate the performance of this measurement method. The performance of individual modules was first validated with designed experiments. The new sensor was then used to monitor the properties of soils during freezing–thawing process, from which the freezing/thawing degree and thermal properties were simultaneously measured. The results are consistent with documented trends of thermal properties variations.

  19. Soil chemical properties affect the reaction of forest soil bacteria to drought and rewetting stress.

    Science.gov (United States)

    Chodak, Marcin; Gołębiewski, Marcin; Morawska-Płoskonka, Justyna; Kuduk, Katarzyna; Niklińska, Maria

    Reaction of soil bacteria to drought and rewetting stress may depend on soil chemical properties. The objectives of this study were to test the reaction of different bacterial phyla to drought and rewetting stress and to assess the influence of different soil chemical properties on the reaction of soil bacteria to this kind of stress. The soil samples were taken at ten forest sites and measured for pH and the contents of organic C (Corg) and total N (Nt), Zn, Cu, and Pb. The samples were kept without water addition at 20 - 30 °C for 8 weeks and subsequently rewetted to achieve moisture equal to 50 - 60 % of their maximum water-holding capacity. Prior to the drought period and 24 h after the rewetting, the structure of soil bacterial communities was determined using pyrosequencing of 16S rRNA genes. The drought and rewetting stress altered bacterial community structure. Gram-positive bacterial phyla, Actinobacteria and Firmicutes, increased in relative proportion after the stress, whereas the Gram-negative bacteria in most cases decreased. The largest decrease in relative abundance was for Gammaproteobacteria and Bacteroidetes. For several phyla the reaction to drought and rewetting stress depended on the chemical properties of soils. Soil pH was the most important soil property influencing the reaction of a number of soil bacterial groups (including all classes of Proteobacteria, Bacteroidetes, Acidobacteria, and others) to drought and rewetting stress. For several bacterial phyla the reaction to the stress depended also on the contents of Nt and Corg in soil. The effect of heavy metal pollution was also noticeable, although weaker compared to other chemical soil properties. We conclude that soil chemical properties should be considered when assessing the effect of stressing factors on soil bacterial communities.

  20. SMAP Level 4 Surface and Root Zone Soil Moisture

    Science.gov (United States)

    Reichle, R.; De Lannoy, G.; Liu, Q.; Ardizzone, J.; Kimball, J.; Koster, R.

    2017-01-01

    The SMAP Level 4 soil moisture (L4_SM) product provides global estimates of surface and root zone soil moisture, along with other land surface variables and their error estimates. These estimates are obtained through assimilation of SMAP brightness temperature observations into the Goddard Earth Observing System (GEOS-5) land surface model. The L4_SM product is provided at 9 km spatial and 3-hourly temporal resolution and with about 2.5 day latency. The soil moisture and temperature estimates in the L4_SM product are validated against in situ observations. The L4_SM product meets the required target uncertainty of 0.04 m(exp. 3)m(exp. -3), measured in terms of unbiased root-mean-square-error, for both surface and root zone soil moisture.

  1. Formation and development of salt crusts on soil surfaces

    KAUST Repository

    Dai, Sheng

    2015-12-14

    The salt concentration gradually increases at the soil free surface when the evaporation rate exceeds the diffusive counter transport. Eventually, salt precipitates and crystals form a porous sodium chloride crust with a porosity of 0.43 ± 0.14. After detaching from soils, the salt crust still experiences water condensation and salt deliquescence at the bottom, brine transport across the crust driven by the humidity gradient, and continued air-side precipitation. This transport mechanism allows salt crust migration away from the soil surface at a rate of 5 μm/h forming salt domes above soil surfaces. The surface characteristics of mineral substrates and the evaporation rate affect the morphology and the crystal size of precipitated salt. In particular, substrate hydrophobicity and low evaporation rate suppress salt spreading.

  2. Hydrological properties of natural and reconstituted soils: compared methods.

    Science.gov (United States)

    Manfredi, Paolo; Cassinari, Chiara; Giupponi, Luca; Trevisan, Marco

    2014-05-01

    Among the physical parameters of soil, the hydrological properties fulfil an important role in illustrating its quality. The trend of the water retention curve indicates the condition of the soil and allows us to define, together with chemical parameters, its eventual state of decline. This work aims to describe the hydrological properties of different types of soils using various techniques and to compare the results. The soils examined can be subdivided into two types: natural soils and reconstituted soils obtained by a chemical mechanical treatment (patented by m.c.m. Ecosistemi s.r.l.) where an initial disgregation is followed by a reconstitution incorporating soil improvers,by a further polycondensation with humic acids and a final restoration. This study is part of a LIFE+ project, co-financed by the European Union and is entitled "Environmental recovery of degraded soils and desertified by a new treatment technology for land reconstruction" (Life 10 ENV IT 400 "New Life"). It aims to test the effectiveness of the reconstitution treatment of the soils in combatting their decline. Natural soils, on which this work is concentrated, are extreme soils: sandy soil (86.2% sand), silt loam soil (42.5% sand, 49.9% silt), clayey soil (54.6% clay, 38.5% silt); reconstituted soils were produced from these. Samples were taken to carry out analyses on water retention through the use of Richards pressure plates. Other samples were used to determine the saturation point and to carry out trials in pots in order to determine the moisture at the permanent wilting point. The information obtained from these laboratory tests were compared to the results of soil pedofunctions. Keywords: Reconstructed soils, Water retention, Permanent wilting point

  3. Soil properties discriminating Araucaria forests with different disturbance levels.

    Science.gov (United States)

    Bertini, Simone Cristina Braga; Azevedo, Lucas Carvalho Basilio; Stromberger, Mary E; Cardoso, Elke Jurandy Bran Nogueira

    2015-04-01

    Soil biological, chemical, and physical properties can be important for monitoring soil quality under one of the most spectacular vegetation formation on Atlantic Forest Biome, the Araucaria Forest. Our aim was to identify a set of soil variables capable of discriminating between disturbed, reforested, and native Araucaria forest soils such that these variables could be used to monitor forest recovery and maintenance. Soil samples were collected at dry and rainy season under the three forest types in two state parks at São Paulo State, Brazil. Soil biological, chemical, and physical properties were evaluated to verify their potential to differentiate the forest types, and discriminant analysis was performed to identify the variables that most contribute to the differentiation. Most of physical and chemical variables were sensitive to forest disturbance level, but few biological variables were significantly different when comparing native, reforested, and disturbed forests. Despite more than 20 years following reforestation, the reforested soils were chemically and biologically distinct from native and disturbed forest soils, mainly because of the greater acidity and Al3+ content of reforested soil. Disturbed soils, in contrast, were coarser in texture and contained greater concentrations of extractable P. Although biological properties are generally highly sensitive to disturbance and amelioration efforts, the most important soil variables to discriminate forest types in both seasons included Al3+, Mg2+, P, and sand, and only one microbial attribute: the NO2- oxidizers. Therefore, these five variables were the best candidates, of the variables we employed, for monitoring Araucaria forest disturbance and recovery.

  4. Temporal changes of soil physic-chemical properties at different soil depths during larch afforestation by multivariate analysis of covariance.

    Science.gov (United States)

    Wang, Hui-Mei; Wang, Wen-Jie; Chen, Huanfeng; Zhang, Zhonghua; Mao, Zijun; Zu, Yuan-Gang

    2014-04-01

    Soil physic-chemical properties differ at different depths; however, differences in afforestation-induced temporal changes at different soil depths are seldom reported. By examining 19 parameters, the temporal changes and their interactions with soil depth in a large chronosequence dataset (159 plots; 636 profiles; 2544 samples) of larch plantations were checked by multivariate analysis of covariance (MANCOVA). No linear temporal changes were found in 9 parameters (N, K, N:P, available forms of N, P, K and ratios of N: available N, P: available P and K: available K), while marked linear changes were found in the rest 10 parameters. Four of them showed divergent temporal changes between surface and deep soils. At surface soils, changing rates were 262.1 g·kg(-1)·year(-1) for SOM, 438.9 mg·g(-1)·year(-1) for C:P, 5.3 mg·g(-1)·year(-1) for C:K, and -3.23 mg·cm(-3)·year(-1) for bulk density, while contrary tendencies were found in deeper soils. These divergences resulted in much moderated or no changes in the overall 80-cm soil profile. The other six parameters showed significant temporal changes for overall 0-80-cm soil profile (P: -4.10 mg·kg(-1)·year(-1); pH: -0.0061 unit·year(-1); C:N: 167.1 mg·g(-1)·year(-1); K:P: 371.5 mg·g(-1) year(-1); N:K: -0.242 mg·g(-1)·year(-1); EC: 0.169 μS·cm(-1)·year(-1)), but without significant differences at different soil depths (P > 0.05). Our findings highlight the importance of deep soils in studying physic-chemical changes of soil properties, and the temporal changes occurred in both surface and deep soils should be fully considered for forest management and soil nutrient balance.

  5. Dynamic soil properties for microzonation of Delhi, India

    Indian Academy of Sciences (India)

    C Hanumantharao; G V Ramana

    2008-11-01

    Delhi, the capital of India, has experienced mild seismic shaking during several earthquakes in the past. The large variations of depth to bedrock and ground water table coupled with different soil types at different locations of Delhi necessitate a seismic microzonation study. Dynamic soil properties such as shear wave velocity, modulus reduction and damping characteristics of local soils are the basic and essential input parameters for conducting even a preliminary ground response analysis which is an essential input in microzonation studies. Shear wave velocity is not measured routinely due to its high cost and lack of the required expertise. Several researchers in the past developed correlations between shear wave velocity (s) and routinely measured values. In the present study, shear wave velocity profiles measured in the field at more than 80 borehole locations to a depth of about 20 to 32m using Spectral Analysis of Surface Waves (SASW) are presented and correlations between shear wave velocity and values are also presented for use by engineers and designers. Results of strain and stress controlled cyclic triaxial tests on remoulded samples of sandsilt mixtures in the high strain range are used for generating the modulus reduction and damping curves and are compared with the well-known curves in the literature. The results presented in this article can be used for microzonation studies as well as site specific ground response analyses at Delhi.

  6. Biotic and abiotic soil properties influence survival of Listeria monocytogenes in soil.

    Directory of Open Access Journals (Sweden)

    Aude Locatelli

    Full Text Available Listeria monocytogenes is a food-borne pathogen responsible for the potentially fatal disease listeriosis and terrestrial ecosystems have been hypothesized to be its natural reservoir. Therefore, identifying the key edaphic factors that influence its survival in soil is critical. We measured the survival of L. monocytogenes in a set of 100 soil samples belonging to the French Soil Quality Monitoring Network. This soil collection is meant to be representative of the pedology and land use of the whole French territory. The population of L. monocytogenes in inoculated microcosms was enumerated by plate count after 7, 14 and 84 days of incubation. Analysis of survival profiles showed that L. monocytogenes was able to survive up to 84 days in 71% of the soils tested, in the other soils (29% only a short-term survival (up to 7 to 14 days was observed. Using variance partitioning techniques, we showed that about 65% of the short-term survival ratio of L. monocytogenes in soils was explained by the soil chemical properties, amongst which the basic cation saturation ratio seems to be the main driver. On the other hand, while explaining a lower amount of survival ratio variance (11%, soil texture and especially clay content was the main driver of long-term survival of L. monocytogenes in soils. In order to assess the effect of the endogenous soils microbiota on L. monocytogenes survival, sterilized versus non-sterilized soils microcosms were compared in a subset of 9 soils. We found that the endogenous soil microbiota could limit L. monocytogenes survival especially when soil pH was greater than 7, whereas in acidic soils, survival ratios in sterilized and unsterilized microcosms were not statistically different. These results point out the critical role played by both the endogenous microbiota and the soil physic-chemical properties in determining the survival of L. monocytogenes in soils.

  7. Heterogeneity of Physico-Chemical Properties in Structured Soils and Its Consequences

    Institute of Scientific and Technical Information of China (English)

    E. JASINSKA; H. WETZEL; T. BAUMGARTL; R. HORN

    2006-01-01

    Structured soils are characterized by the presence of inter- and intra-aggregate pore systems and aggregates, which show varying chemical, physical, and biological properties depending on the aggregate type and land use system. How far these aspects also affect the ion exchange processes and to what extent the interaction between the carbon distribution and kind of organic substances affect the internal soil strength as well as hydraulic properties like wettability are still under discussion. Thus, the objective of this research was to clarify the effect of soil aggregation on physical and chemical properties of structured soils at two scales: homogenized material and single aggregates. Data obtained by sequentially peeling off soil aggregates layers revealed gradients in the chemical composition from the aggregate surface to the aggregatecore. In aggregates from long term untreated forest soils we found lower amounts of carbon in the external layer, while in arable soils the differentiation was not pronounced. However, soil aggregates originating from these sites exhibited a higher concentration of microbial activity in the outer aggregate layer and declined towards the interior. Furthermore,soil depth and the vegetation type affected the wettability. Aggregate strength depended on water suction and differences in tillage treatments.

  8. Effect of Management Practices on Soil Microstructure and Surface Microrelief

    Directory of Open Access Journals (Sweden)

    R. Garcia Moreno

    2012-01-01

    Full Text Available Soil surface roughness (SSR and porosity were evaluated from soils located in two farms belonging to the Plant Breeding Institute of the University of Sidney. The sites differ in their soil management practices; the first site (PBI was strip-tilled during early fall (May 2010, and the second site (JBP was under power harrowed tillage at the end of July 2010. Both sites were sampled in mid-August. At each location, SSR was measured for three 1 m2 subplots using shadow analysis. To evaluate porosity and aggregation, soil samples were scanned using X-ray computed tomography with 5 μm resolution. The results show a strong negative correlation between SSR and porosity, 20.13% SSR and 41.38% porosity at PBI versus 42.00% SSR and 18.35% porosity at JBP. However, soil images show that when soil surface roughness is higher due to conservation and soil management practices, the processes of macroaggregation and structural porosity are enhanced. Further research must be conducted on SSR and porosity in different types of soils, as they provide complementary information on the evaluation of soil erosion susceptibility.

  9. Influence of land cover changes on the physical and chemical properties of alpine meadow soil

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Taking the alpine cold meadow grassland in the southeastern part of the Qinghai-Tibetan Plateau as an example, this research deals with the characteristics of alpine meadow soil property changes, including soil nutrients, soil physical properties and soil moisture content under different land coverage conditions. With the degradation of grassland vegetation and the decline of vegetation coverage, soil compactness reduces, gravel content increases and bulk density increases. The originally dense root-system layer is gradually denuded, making the soil coarse and gravel. The change of the organic matter contents with the vegetation coverage change in the surface soil layer (0-20 cm) has shown an obvious cubic polynomial curve process. The organic matter contents increase rapidly when land coverage is above 60%, contrarily decreases on a large scale when land coverage is below 30%. Between 30%-60% of land coverage the organic matter contents remain stable. The total N and organic matter contents in soil have shown quite similar change regularity. Following this the mathematic equations are derived to describe such change processes. Moisture content in soil changes sharply with the vegetation coverage change. Soil moisture content change with the vegetation coverage change has shown a quadratic parabola process. Results have shown that organic matter content and the total N content of the alpine meadow soil decrease by 14890 kg/hm2 and 5505 kg/hm2 respectively as the vegetation coverage reduces from 90% to less than 30%. The heavy changes of soil physical and chemical properties with grassland degradation have made the recovery of alpine meadow ecological system impossible. The protection of alpine meadow vegetation is of vital importance to the maintenance of the regional soil environment and the regional ecological system.

  10. Analysis of surface soil moisture patterns in agricultural landscapes using Empirical Orthogonal Functions

    Directory of Open Access Journals (Sweden)

    W. Korres

    2010-05-01

    Full Text Available Soil moisture is one of the fundamental variables in hydrology, meteorology and agriculture. Nevertheless, its spatio-temporal patterns in agriculturally used landscapes that are affected by multiple natural (rainfall, soil, topography etc. and agronomic (fertilisation, soil management etc. factors are often not well known. The aim of this study is to determine the dominant factors governing the spatio-temporal patterns of surface soil moisture in a grassland and an arable test site that are located within the Rur catchment in Western Germany. Surface soil moisture (0–6 cm was measured in an approx. 50×50 m grid during 14 and 17 measurement campaigns (May 2007 to November 2008 in both test sites. To analyse the spatio-temporal patterns of surface soil moisture, an Empirical Orthogonal Function (EOF analysis was applied and the results were correlated with parameters derived from topography, soil, vegetation and land management to link the patterns to related factors and processes. For the grassland test site, the analysis resulted in one significant spatial structure (first EOF, which explained 57.5% of the spatial variability connected to soil properties and topography. The statistical weight of the first spatial EOF is stronger on wet days. The highest temporal variability can be found in locations with a high percentage of soil organic carbon (SOC. For the arable test site, the analysis resulted in two significant spatial structures, the first EOF, which explained 38.4% of the spatial variability, and showed a highly significant correlation to soil properties, namely soil texture and soil stone content. The second EOF, which explained 28.3% of the spatial variability, is linked to differences in land management. The soil moisture in the arable test site varied more strongly during dry and wet periods at locations with low porosity. The method applied is capable of identifying the dominant parameters controlling spatio-temporal patterns of

  11. Retrieval of Surface and Subsurface Moisture of Bare Soil Using Simulated Annealing

    Science.gov (United States)

    Tabatabaeenejad, A.; Moghaddam, M.

    2009-12-01

    Soil moisture is of fundamental importance to many hydrological and biological processes. Soil moisture information is vital to understanding the cycling of water, energy, and carbon in the Earth system. Knowledge of soil moisture is critical to agencies concerned with weather and climate, runoff potential and flood control, soil erosion, reservoir management, water quality, agricultural productivity, drought monitoring, and human health. The need to monitor the soil moisture on a global scale has motivated missions such as Soil Moisture Active and Passive (SMAP) [1]. Rough surface scattering models and remote sensing retrieval algorithms are essential in study of the soil moisture, because soil can be represented as a rough surface structure. Effects of soil moisture on the backscattered field have been studied since the 1960s, but soil moisture estimation remains a challenging problem and there is still a need for more accurate and more efficient inversion algorithms. It has been shown that the simulated annealing method is a powerful tool for inversion of the model parameters of rough surface structures [2]. The sensitivity of this method to measurement noise has also been investigated assuming a two-layer structure characterized by the layers dielectric constants, layer thickness, and statistical properties of the rough interfaces [2]. However, since the moisture profile varies with depth, it is sometimes necessary to model the rough surface as a layered structure with a rough interface on top and a stratified structure below where each layer is assumed to have a constant volumetric moisture content. In this work, we discretize the soil structure into several layers of constant moisture content to examine the effect of subsurface profile on the backscattering coefficient. We will show that while the moisture profile could vary in deeper layers, these layers do not affect the scattered electromagnetic field significantly. Therefore, we can use just a few layers

  12. Invasive Plants Rapidly Reshape Soil Properties in a Grassland Ecosystem.

    Science.gov (United States)

    Gibbons, Sean M; Lekberg, Ylva; Mummey, Daniel L; Sangwan, Naseer; Ramsey, Philip W; Gilbert, Jack A

    2017-01-01

    Plant invasions often reduce native plant diversity and increase net primary productivity. Invaded soils appear to differ from surrounding soils in ways that impede restoration of diverse native plant communities. We hypothesize that invader-mediated shifts in edaphic properties reproducibly alter soil microbial community structure and function. Here, we take a holistic approach, characterizing plant, prokaryotic, and fungal communities and soil physicochemical properties in field sites, invasion gradients, and experimental plots for three invasive plant species that cooccur in the Rocky Mountain West. Each invader had a unique impact on soil physicochemical properties. We found that invasions drove shifts in the abundances of specific microbial taxa, while overall belowground community structure and functional potential were fairly constant. Forb invaders were generally enriched in copiotrophic bacteria with higher 16S rRNA gene copy numbers and showed greater microbial carbohydrate and nitrogen metabolic potential. Older invasions had stronger effects on abiotic soil properties, indicative of multiyear successions. Overall, we show that plant invasions are idiosyncratic in their impact on soils and are directly responsible for driving reproducible shifts in the soil environment over multiyear time scales. IMPORTANCE In this study, we show how invasive plant species drive rapid shifts in the soil environment from surrounding native communities. Each of the three plant invaders had different but consistent effects on soils. Thus, there does not appear to be a one-size-fits-all strategy for how plant invaders alter grassland soil environments. This work represents a crucial step toward understanding how invaders might be able to prevent or impair native reestablishment by changing soil biotic and abiotic properties.

  13. Hygrothermal Simulation of Foundations: Part 1 - Soil Material Properties

    Energy Technology Data Exchange (ETDEWEB)

    Kehrer, Manfred [ORNL; Pallin, Simon B [ORNL

    2012-10-01

    The hygrothermal performance of soils coupled to buildings is a complicated process. A computational approach for heat transfer through the ground has been well defined (EN ISO 13370:2007, 2007), and simplified methods have been developed (Staszczuk, Radon, and Holm 2010). However, these approaches generally ignore the transfer of soil moisture, which is not negligible (Janssen, Carmeliet, and Hens 2004). This study is divided into several parts. The intention of the first part is to gather, comprehend and adapt soil properties from Soil Science. The obtained information must be applicable to related tasks in Building Science and validated with hygrothermal calculation tools. Future parts of this study will focus on the validation aspect of the soil properties to be implemented. Basic changes in the software code may be requested at this time. Different types of basement construction will be created with a hygrothermal calculation tool, WUFI. Simulations from WUFI will be compared with existing or ongoing measurements. The intentions of the first part of this study have been fulfilled. The soil properties of interest in Building Science have been defined for 12 different soil textures. These properties will serve as input parameters when performing hygrothermal calculations of building constructions coupled to soil materials. The reliability of the soil parameters will be further evaluated with measurements in Part 2.

  14. Modeling cation exchange capacity and soil water holding capacity from basic soil properties

    Directory of Open Access Journals (Sweden)

    Idowu Olorunfemi

    2016-10-01

    Full Text Available Cation exchange capacity (CEC is a good indicator of soil productivity and is useful for making recommendations of phosphorus, potassium, and magnesium for soils of different textures. Soil water holding capacity (SWHC defines the ability of a soil to hold water at a particular time of the season. This research predicted CEC and SWHC of soils using pedotransfer models developed (using Minitab 17 statistical software from basic soil properties (Sand(S, Clay(C, soil pH, soil organic carbon (SOC and verify the model by comparing the relationship between measured and estimated (obtained by PTFs CEC and SWHC in the Forest Vegetative Zone of Nigeria. For this study, a total of 105 sampling points in 35 different locations were sampled in the study areas. Three sampling points were randomly selected per location and three undisturbed samples were collected at each sampling point. The results showed success in predicting CEC and SWHC from basic soil properties. In this study, five linear regression models for predicting soil CEC and seven linear regression models for predicting SWHC from some soil physical and chemical properties were suggested. Model 5 [CEC = -13.93+2.645 pH +0.0446 C (%+2.267 SOC (%] was best for predicting CEC while model 12 [SWHC (%=36.0- 0.215 S (%+0.113 C (%+10.36 SOC (%] is the most acceptable model for predicting SWHC.

  15. Changes in the properties of solonetzic soil complexes in the dry steppe zone under anthropogenic impacts

    Science.gov (United States)

    Lyubimova, I. N.; Novikova, A. F.

    2016-05-01

    Long-term studies of changes in the properties of solonetzic soil complexes of the dry steppe zone under anthropogenic impacts (deep plowing, surface leveling, irrigation, and post-irrigation use) have been performed on the Privolzhskaya sand ridge and the Khvalyn and Ergeni plains. The natural morphology of solonetzic soils was strongly disturbed during their deep ameliorative plowing. At present, the soil cover consists of solonetzic agrozems (Sodic Protosalic Cambisols (Loamic, Aric, Protocalcic)), textural (clay-illuvial) calcareous agrozems (Eutric Cambisols (Loamic, Aric, Protocalcic)), agrosolonetzes (Endocalcaric Luvisols (Loamic, Aric, Cutanic, Protosodic), agrochestnut soils (Eutric Cambisols (Siltic, Aric)), and meadowchestnut soils (Haplic Kastanozems). No features attesting to the restoration of the initial profile of solonetzes have been found. The dynamics of soluble salts and exchangeable sodium differ in the agrosolonetzes and solonetzic agrozems. A rise in pH values takes place in the middle part of the soil profiles on the Khvalyn and Ergeni plains.

  16. Hygrothermal Material Properties for Soils in Building Science

    Energy Technology Data Exchange (ETDEWEB)

    Kehrer, Manfred [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Pallin, Simon B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-01-01

    Hygrothermal performance of soils coupled to buildings is complicated because of the dearth of information on soil properties. However they are important when numerical simulation of coupled heat and moisture transport for below-grade building components are performed as their temperature and moisture content has an influence on the durability of the below-grade building component. Soils can be classified by soil texture. According to the Unified Soil Classification System (USCA), 12 different soils can be defined on the basis of three soil components: clay, sand, and silt. This study shows how existing material properties for typical American soils can be transferred and used for the calculation of the coupled heat and moisture transport of building components in contact with soil. Furthermore a thermal validation with field measurements under known boundary conditions is part of this study, too. Field measurements for soil temperature and moisture content for two specified soils are carried out right now under known boundary conditions. As these field measurements are not finished yet, the full hygrothermal validation is still missing

  17. Texture and geochemistry of surface horizons of Arctic soils from a non-glaciated catchment, SW Spitsbergen

    Directory of Open Access Journals (Sweden)

    Szymański Wojciech

    2016-09-01

    Full Text Available Physical and chemical properties of Arctic soils and especially the properties of surface horizons of the soils are very important because they are responsible for the rate and character of plant colonization, development of vegetation cover, and influence the rate and depth of thawing of soils and development of active layer of permafrost during summer. The main aim of the present study is to determine and explain the spatial diversity of selected physical and chemical properties of surface horizons of Arctic soils from the non-glaciated Fuglebekken catchment located in the Hornsund area (SW Spitsbergen by means of geostatistical approach. Results indicate that soil surface horizons in the Fuglebekken catchment are characterized by highly variable physical and chemical properties due to a heterogeneous parent material (marine sediments, moraine, rock debris, tundra vegetation types, and non-uniform influence of seabirds. Soils experiencing the strongest influence of seabird guano have a lower pH than other soils. Soils developed on the lateral moraine of the Hansbreen glacier have the highest pH due to the presence of carbonates in the parent material and a lack or presence of a poorly developed and discontinuous A horizon. The soil surface horizons along the coast of the Hornsund exhibit the highest content of the sand fraction and SiO2. The surface of soils occurring at the foot of the slope of Ariekammen Ridge is characterized by the highest content of silt and clay fractions as well as Al2O3, Fe2O3, and K2O. Soils in the central part of the Fuglebekken catchment are depleted in CaO, MgO, and Na2O in comparison with soils in the other sampling sites, which indicates the highest rate of leaching in this part of the catchment.

  18. Ice nucleation properties of agricultural soil dusts

    Science.gov (United States)

    Steinke, Isabelle; Funk, Roger; Busse, Jacqueline; Iturri, Antonela; Kirchen, Silke; Leue, Martin; Möhler, Ottmar; Schwartz, Thomas; Sierau, Berko; Toprak, Emre; Ulrich, Andreas; Hoose, Corinna; Leisner, Thomas

    2015-04-01

    Soil dust particles emitted from agricultural areas contain large amounts of organic material such as fungi, bacteria and plant debris. Being carrier for potentially highly ice-active biological particles, agricultural soil dusts are candidates for being very ice-active as well. In this work, we present ice nucleation experiments conducted in the AIDA cloud chamber. We investigated the ice nucleation efficiency of four types of soil dust from different regions of the world. Results are presented for the immersion freezing and the deposition nucleation mode: all soil dusts show higher ice nucleation efficiencies than desert dusts, especially at temperatures above 254 K. For one soil dust sample, the effect of heat treatments was investigated. Heat treatments did not affect the ice nucleation efficiency which presumably excludes primary biological particles as the only source of the increased ice nucleation efficiency. Therefore, organo-mineral complexes or organic compounds may contribute substantially to the high ice nucleation activity of agricultural soil dusts.

  19. Microbiological and biochemical properties of an agricultural Mexican soil amended with sewage sludge

    OpenAIRE

    Renato Armenta; Rocio Vaca; Jorge Lugo; Pedro del Aguila

    2012-01-01

    The application of sewage sludge is a concern because it may affect the quality of organic matter and microbiological and biochemical soil properties. The effects of surface application of sewage sludge to an agricultural soil (at 18 and 36 t ha-1 dry basis) were assessed in one maize (Zea mays L.) growing season. The study evaluated microbial biomass, basal respiration and selected enzymatic activities (catalase, urease, acid and alkaline phosphatase, and #946;-glucosidase) 230 days after s...

  20. Hydro-physical processes and soil properties correlated with origin of soil hydrophobicity

    Directory of Open Access Journals (Sweden)

    Eduardo Saldanha Vogelmann

    2013-09-01

    Full Text Available Hydrophobicity is the phenomenon where the soil has reduced wettability, usually associated with coating of soil particles by hydrophobic organic substances. This study aimed to provide a description of the hydrophobicity occurrence, highlight recent discoveries about the origin of phenomenon and discuss the main hydro-physical properties and chemical processes linked to the development of hydrophobic behavior in soils. Hydrophobicity is associated with other factors such as soil moisture, presence of some fungi species, particle size, soil pH and occurrence of burnings. The causative substances may be provided by local vegetation, through deposition or decomposition. The dependence and combination of different factors that influence hydrophobicity in soils lead to a spatial and temporal variability of the phenomenon, with negative consequences in the processes of infiltration and water percolation, affecting the three-dimensional distribution and dynamics of soil moisture. Thus, the occurrence of a hydrophobic character requires special attention, especially regarding soil use and management.

  1. Surface active monomers synthesis, properties, and application

    CERN Document Server

    Borzenkov, Mykola

    2014-01-01

    This brief includes information on the background?of and development of synthesis of various types of surface active monomers. The authors explain the importance of utilization of surface active monomers for creation of surface active polymers? and the various biomedical applications of such compounds . This brief introduces techniques for the synthesis of novel types of surface active monomers, their colloidal and polymerizable properties and application for needs of medicine and biology.

  2. Predicting root zone soil moisture using surface data

    Science.gov (United States)

    Manfreda, S.; Brocca, L.; Moramarco, T.; Melone, F.; Sheffield, J.; Fiorentino, M.

    2012-04-01

    In recent years, much effort has been given to monitoring of soil moisture from satellite remote sensing. These tools represent an extraordinary source of information for hydrological applications, but they only provide information on near-surface soil moisture. In the present work, we developed a new formulation for the estimation of the soil moisture in the root zone based on the measured value of soil moisture at the surface. The method derives from a simplified form of the soil water balance equation and for this reason all parameters adopted are physically consistent. The formulation provides a closed form of the relationship between the root zone soil moisture and the surface soil moisture with a limited number of parameters, such as: the ratio between the depth of the surface layer and the deeper layer, the water loss coefficient, and the field capacity. The method has been tested using modeled soil moisture obtained from the North American Land Data Assimilation System (NLDAS). The NLDAS is a multi-institution partnership aimed at developing a retrospective data set, using available atmospheric and land surface meteorological observations to compute the land surface hydrological budget. The NLDAS database was extremely useful for the scope of the present research since it provides simulated data over an extended area with different climatic and physical condition and moreover it provides soil moisture data averaged over different depths. In particular, we used values in the top 10 cm and 100 cm layers. One year of simulation was used to test the ability of the developed method to describe soil moisture fluctuation in the 100cm layer over the entire NLDAS domain. The method was adopted by calibrating one of its three parameters and defining the remaining two based on physical characteristics of the site (using the potential evapotranspiration and ratio between the first and the second soil layer depth). In general, the method performed better than

  3. Magnetic properties of alluvial soils polluted with heavy metals

    Science.gov (United States)

    Dlouha, S.; Petrovsky, E.; Boruvka, L.; Kapicka, A.; Grison, H.

    2012-04-01

    Magnetic properties of soils, reflecting mineralogy, concentration and grain-size distribution of Fe-oxides, proved to be useful tool in assessing the soil properties in terms of various environmental conditions. Measurement of soil magnetic properties presents a convenient method to investigate the natural environmental changes in soils as well as the anthropogenic pollution of soils with several risk elements. The effect of fluvial pollution with Cd, Cu, Pb and Zn on magnetic soil properties was studied on highly contaminated alluvial soils from the mining/smelting district (Příbram; CZ) using a combination of magnetic and geochemical methods. The basic soil characteristics, the content of heavy metals, oxalate, and dithionite extractable iron were determined in selected soil samples. Soil profiles were sampled using HUMAX soil corer and the magnetic susceptibility was measured in situ, further detailed magnetic analyses of selected distinct layers were carried out. Two types of variations of magnetic properties in soil profiles were observed corresponding to indentified soil types (Fluvisols, and Gleyic Fluvisols). Significantly higher values of topsoil magnetic susceptibility compared to underlying soil are accompanied with high concentration of heavy metals. Sequential extraction analysis proved the binding of Pb, Zn and Cd in Fe and Mn oxides. Concentration and size-dependent parameters (anhysteretic and isothermal magnetization) were measured on bulk samples in terms of assessing the origin of magnetic components. The results enabled to distinguish clearly topsoil layers enhanced with heavy metals from subsoil samples. The dominance of particles with pseudo-single domain behavior in topsoil and paramagnetic/antiferromagnetic contribution in subsoil were observed. These measurements were verified with room temperature hysteresis measurement carried out on bulk samples and magnetic extracts. Thermomagnetic analysis of magnetic susceptibility measured on

  4. Titratable Acidity and Alkalinity of Red Soil Surfaces

    Institute of Scientific and Technical Information of China (English)

    SHAOZONG-CHEN; HEQUN; 等

    1993-01-01

    The surfaces of red soils have an apparent amphoteric character,carrying titratable acidity and titratable alkalinity simultaneously.The titratable acidity arises from deprotonation of hydroxyl groups of hydrous oxide-type surfaces and dissociation of weak-acid functional groups of soil organic matter,while the titratable alkalinity is derived from release of hydroxyl groups of hydrous oxide-type surfaces.The titratable acidity and titratable alkalinity mainly depended on the composition and content of iron and aluminum oxides in the soils.The results showed that the titratable acidity and titratable alkalinity were in significantly positive correlation not only with the content of amorphous aluminum oxide(Alo) and iron oxide(Feo) extracted with acid ammonium oxalate solution,free iron oxide(Fed) extracted with sodium dithionite-citrate-bicarbonate(DCB) and clays,but also with the zero point of charge (ZPC) of the samples.Organic matter made an important contribution to the titratable acidity.the titratable alkalinity was closely correlated with the amount of fluoride ions adsorbed.The titratable acidity and titratable alkalinity of red soils were influenced by parent materials,being in the order of red soil derived from basalt> that from tuff> that from granite.The titratable acidity and titratable alkalinity ware closely related with origination of the variable charges of red soils,and to a certain extent were responsible for variable negative and positive charges of the soils.

  5. Effect of land use change on soil properties and functions

    Science.gov (United States)

    Tonutare, Tonu; Kõlli, Raimo; Köster, Tiina; Rannik, Kaire; Szajdak, Lech; Shanskiy, Merrit

    2014-05-01

    For good base of sustainable land management and ecologically sound protection of soils are researches on soil properties and functioning. Ecosystem approach to soil properties and functioning is equally important in both natural and cultivated land use conditions. Comparative analysis of natural and agro-ecosystems formed on similar soil types enables to elucidate principal changes caused by land use change (LUC) and to elaborate the best land use practices for local pedo-ecological conditions. Taken for actual analysis mineral soils' catena - rendzina → brown soils → pseudopodzolic soils → gley-podzols - represent ca 1/3 of total area of Estonian normal mineral soils. All soils of this catena differ substantially each from other by calcareousness, acidity, nutrition conditions, fabric and humus cover type. This catena (representative to Estonian pedo-ecological conditions) starts with drought-prone calcareous soils. Brown (distributed in northern and central Estonia) and pseudopodzolic soils (in southern Estonia) are the most broadly acknowledged for agricultural use medium-textured high-quality automorphic soils. Dispersedly distributed gley-podzols are permanently wet and strongly acid, low-productivity sandy soils. In presentation four complex functions of soils are treated: (1) being a suitable soil environment for plant cover productivity (expressed by annual increment, Mg ha-1 yr-1); (2) forming adequate conditions for decomposition, transformation and conversion of fresh falling litter (characterized by humus cover type); (3) deposition of humus, individual organic compounds, plant nutrition elements, air and water, and (4) forming (bio)chemically variegated active space for soil type specific edaphon. Capacity of soil cover as depositor (3) depends on it thickness, texture, calcareousness and moisture conditions. Biological activity of soil (4) is determined by fresh organic matter influx, quality and quantity of biochemical substances and humus

  6. The effect of rock fragments on the hydraulic properties of soils

    Energy Technology Data Exchange (ETDEWEB)

    Zimmerman, R.W.; Bodvarsson, G.S.

    1995-04-01

    Many soils contain rock fragments the sizes of which are much larger than the average pore size of the sieved soil. Due to the fact that these fragments are often fairly large in relation to the soil testing apparatus, it is common to remove them before performing hydrologic tests on the soil. The question then arises as to whether or not there is a simple way to correct the laboratory-measured values to account for the fragments, so as to arrive at property values that can apply to the soil in situ. This question has arisen in the surface infiltration studies that are part of the site characterization program at Yucca Mountain, where accurate values of the hydraulic conductivities of near-surface soils are needed in order to accurately estimate infiltration rates. Although this problem has been recognized for some time, and numerous review articles have been written there are as yet no proven models to account for the effect of rock fragments on hydraulic conductivity and water retention. In this report we will develop some simple physically-based models to account for the effects of rock fragments on gross hydrological properties, and apply the resulting equations to experimental data taken from the literature. These models are intended for application to data that is currently being collected by scientists from the USGS on near-surface soils from Yucca Mountain.

  7. Spatial correlation between weed species densities and soil properties

    DEFF Research Database (Denmark)

    Walter, Mette; Christensen, Svend; Simmelsgaard, Svend Erik

    2002-01-01

    -correlated with the phosphorus content in the soil in all years. The density of Veronica spp. and Poa annua L. was negatively cross-correlated with pH in all three years. Other spatial cross-correlations that were found in this study were inconsistent over time or field site. The densities of some of the weed species were......The spatial cross-correlation between weed species densities and six soil properties within fields was analysed using cross-semivariograms. The survey was carried out in three successive years in two fields. The most consistent relationship between weed species density (numbers m−2) and soil...... spatially cross-correlated with more than one soil property. The results showed that the range of spatial dependence varied not only between fields, but also between weed species and soil properties, as well as between years. This study indicates that the weed pattern is field-specific and that the spatial...

  8. Flood quantiles scaling with upper soil hydraulic properties for different land uses at catchment scale

    Science.gov (United States)

    Peña, Luis E.; Barrios, Miguel; Francés, Félix

    2016-10-01

    Changes in land use within a catchment are among the causes of non-stationarity in the flood regime, as they modify the upper soil physical structure and its runoff production capacity. This paper analyzes the relation between the variation of the upper soil hydraulic properties due to changes in land use and its effect on the magnitude of peak flows: (1) incorporating fractal scaling properties to relate the effect of the static storage capacity (the sum of capillary water storage capacity in the root zone, canopy interception and surface puddles) and the upper soil vertical saturated hydraulic conductivity on the flood regime; (2) describing the effect of the spatial organization of the upper soil hydraulic properties at catchment scale; (3) examining the scale properties in the parameters of the Generalized Extreme Value (GEV) probability distribution function, in relation to the upper soil hydraulic properties. This study considered the historical changes of land use in the Combeima River catchment in South America, between 1991 and 2007, using distributed hydrological modeling of daily discharges to describe the hydrological response. Through simulation of land cover scenarios, it was demonstrated that it is possible to quantify the magnitude of peak flows in scenarios of land cover changes through its Wide-Sense Simple Scaling with the upper soil hydraulic properties.

  9. Effect of Corn Residue Biochar on the Hydraulic Properties of Sandy Loam Soil

    Directory of Open Access Journals (Sweden)

    Avanthi Deshani Igalavithana

    2017-02-01

    Full Text Available Biochar has an ability to alter the biological, chemical, and physical properties of soil due to its physicochemical properties such as surface area, porosity, nutrient retention ability, available nutrient contents, aromaticity, etc. The present study was designed to evaluate the impact of physical properties and application rate of biochar on the hydraulic properties of a sandy loam soil in the short term. Biochar was produced at 500 °C from dried corn residue (BC500. The BC500 was incorporated at the rates of 0, 2.5%, 5.0%, 7.5%, and 10% (w·w−1 into the sandy loam soil and filled up to a height of 4 cm, in cores having 5 cm diameter and height. Each treatment was performed in triplicate and equilibrated for 30 days. Then saturated hydraulic conductivity (Ksat, water holding capacity (WHC, and bulk density were determined in each sample after four days of saturation at room temperature in a water bath. The BC500 particle size distribution, pores, and surface functional groups were assessed. The Ksat exhibited a highly significant exponential reduction from 0% to 7.5% of BC500 application and approached an asymptote at 10% BC500. Bulk density showed a significant negative correlation to biochar application rate. The WHC and BC500 application rate illustrated a strong positive relationship. Biochar surface was free from hydrophobic functional groups. The addition of BC500 has a positive influence on soil hydraulic properties, primarily due to the increased soil porosity. The BC500 is composed of a microporous structure and hydrophilic surface that retain water in sandy textured soils. The application of BC500 would be a wise investment to maximize the water use efficiency in soils for agricultural production.

  10. [Impact of reclaimed water irrigation on soil chemical properties and culturable microorganisms ].

    Science.gov (United States)

    Gong, Xue; Wang, Ji-hua; Guan, Jian-fei; Yang, Xue-chen; Chen, Dai-ci

    2014-09-01

    This research used batch soil column experiment to study the effects of irrigating with reclaimed water and tap water on the soil chemical properties and culturable microorganisms. The results indicated that reclaimed water could markedly increase the soil organic material (OM) and total nitrogen (TN) content, but it had no obvious effect on total phosphorus (TP), available phosphorus (AP) and pH value. Reclaimed water irrigation could significantly enhance the amounts of surface soil bacteria and actinomycetes at a depth of 0-20 cm, but it had little effect on the biomass of 20-40 cm and 40-60 cm soil layers. The dominant bacteria in tap water irrigation area was the genus Bacillus whereas that of reclaimed water irrigation area was the genus Acinetobacter. Tap water irrigation area had four endemic genera and reclaimed water irrigation area had six endemic genera. Reclaimed water had no obvious effect on the microbial community Shannon diversity of 0-20 cm soil layer, while it decreased Pielou evenness index, and improved Margalef richness index. Through SPSS 17. 0 correlation analysis between soil microbes quantity and soil chemical properties, it was shown that the soil microbes quantity was positively correlated with OM, TN, TP and AP, but negatively correlated with soil water content (SWC) and pH value. Based on CANOCO 4.5 detrended correspondence analysis (DCA) and redundancy analysis (RDA) between soil microbes species and soil chemical properties, it was shown that AP had the strongest correlation with the microbial community (P = 0.002). TN and TP had larger impact on Streptococcus, Aeromonas and Neisseria. OM and AP had larger impact on Aerococcus, Planococcus and Halobacterium.

  11. Wetting properties of molecularly rough surfaces

    Science.gov (United States)

    Svoboda, Martin; Malijevský, Alexandr; Lísal, Martin

    2015-09-01

    We employ molecular dynamics simulations to study the wettability of nanoscale rough surfaces in systems governed by Lennard-Jones (LJ) interactions. We consider both smooth and molecularly rough planar surfaces. Solid substrates are modeled as a static collection of LJ particles arranged in a face-centered cubic lattice with the (100) surface exposed to the LJ fluid. Molecularly rough solid surfaces are prepared by removing several strips of LJ atoms from the external layers of the substrate, i.e., forming parallel nanogrooves on the surface. We vary the solid-fluid interactions to investigate strongly and weakly wettable surfaces. We determine the wetting properties by measuring the equilibrium droplet profiles that are in turn used to evaluate the contact angles. Macroscopic arguments, such as those leading to Wenzel's law, suggest that surface roughness always amplifies the wetting properties of a lyophilic surface. However, our results indicate the opposite effect from roughness for microscopically corrugated surfaces, i.e., surface roughness deteriorates the substrate wettability. Adding the roughness to a strongly wettable surface shrinks the surface area wet with the liquid, and it either increases or only marginally affects the contact angle, depending on the degree of liquid adsorption into the nanogrooves. For a weakly wettable surface, the roughness changes the surface character from lyophilic to lyophobic due to a weakening of the solid-fluid interactions by the presence of the nanogrooves and the weaker adsorption of the liquid into the nanogrooves.

  12. Novel Measurement and Monitoring Approaches for Surface and Near-Surface Soil Moisture

    Science.gov (United States)

    Jones, S. B.; Sheng, W.; Zhou, R.; Sadeghi, M.; Tuller, M.

    2015-12-01

    The top inch of the earth's soil surface is a very dynamic and important layer where physical and biogeochemical processes take place under extreme diurnal and seasonal moisture and temperature variations. Some of these critical surfaces include biocrusts, desert pavements, agricultural lands, mine tailings, hydrophobic forest soils, all of which can significantly impact environmental conditions at large-scales. Natural hazards associated with surface conditions include dust storms, post-fire erosion and flooding in addition to crop failure. Less obvious, though continually occurring, are microbial-induced gas emissions that are also significantly impacted by surface conditions. With so much at stake, it is surprising that in today's technological world there are few if any sensors designed for monitoring the top few mm or cm of the soil surface. In particular, remotely sensed data is expected to provide near-real time surface conditions of our Earth, but we lack effective tools to measure and calibrate surface soil moisture. We are developing multiple methods for measurement and monitoring of surface and near-surface soil water content which include gravimetric as well as electromagnetic approaches. These novel measurement solutions and their prospects to improve soil surface water content determination will be presented.

  13. Potential applications of surface active compounds by Gordonia sp. strain BS29 in soil remediation technologies.

    Science.gov (United States)

    Franzetti, Andrea; Caredda, Paolo; Ruggeri, Claudio; La Colla, Paolo; Tamburini, Elena; Papacchini, Maddalena; Bestetti, Giuseppina

    2009-05-01

    A wide range of structurally different surface active compounds (SACs) is synthesised by many prokaryotic and eukaryotic microorganisms. Due to their properties, microbial SACs have been exploited in environmental remediation techniques. From a diesel-contaminated soil, we isolated the Gordonia sp. strain BS29 which extensively grows on aliphatic hydrocarbons and produces two different types of SACs: extracellular bioemulsans and cell-bound biosurfactants. The aim of this work was to evaluate the potential applications of the strain BS29 and its SACs in the following environmental technologies: bioremediation of soils contaminated by aliphatic and aromatic hydrocarbons, and washing of soils contaminated by crude oil, polycyclic aromatic hydrocarbons (PAHs) and heavy metals. Microcosm bioremediation experiments were carried out with soils contaminated by aliphatic hydrocarbons or PAHs, while batch soil washing experiments were carried out with soils contaminated by crude oil, PAHs or heavy metals. Bioremediation results showed that the BS29 bioemulsans are able to slightly enhance the biodegradation of recalcitrant branched hydrocarbons. On the other hand, we obtained the best results in soil washing of hydrocarbons. The BS29 bioemulsans effectively remove crude oil and PAHs from soil. Particularly, crude oil removal by BS29 bioemulsans is comparable to the rhamnolipid one in the same experimental conditions showing that the BS29 bioemulsans are promising washing agents for remediation of hydrocarbon-contaminated soils.

  14. Soil physical properties and grape yield influenced by cover crops and management systems

    Directory of Open Access Journals (Sweden)

    Jaqueline Dalla Rosa

    2013-10-01

    Full Text Available The use of cover crops in vineyards is a conservation practice with the purpose of reducing soil erosion and improving the soil physical quality. The objective of this study was to evaluate cover crop species and management systems on soil physical properties and grape yield. The experiment was carried out in Bento Gonçalves, RS, Southern Brazil, on a Haplic Cambisol, in a vineyard established in 1989, using White and Rose Niagara grape (Vitis labrusca L. in a horizontal, overhead trellis system. The treatments were established in 2002, consisting of three cover crops: spontaneous species (SS, black oat (Avena strigosa Schreb (BO, and a mixture of white clover (Trifolium repens L., red clover (Trifolium pratense L. and annual rye-grass (Lolium multiflorum L. (MC. Two management systems were applied: desiccation with herbicide (D and mechanical mowing (M. Soil under a native forest (NF area was collected as a reference. The experimental design consisted of completely randomized blocks, with three replications. The soil physical properties in the vine rows were not influenced by cover crops and were similar to the native forest, with good quality of the soil structure. In the inter-rows, however, there was a reduction in biopores, macroporosity, total porosity and an increase in soil density, related to the compaction of the surface soil layer. The M system increased soil aggregate stability compared to the D system. The treatments affected grapevine yield only in years with excess or irregular rainfall.

  15. Sensor data fusion to predict multiple soil properties

    NARCIS (Netherlands)

    Mahmood, H.S.; Hoogmoed, W.B.; Henten, van E.J.

    2012-01-01

    The accuracy of a single sensor is often low because all proximal soil sensors respond to more than one soil property of interest. Sensor data fusion can potentially overcome this inability of a single sensor and can best extract useful and complementary information from multiple sensors or sources.

  16. Influence of soil moisture content on surface albedo and soil thermal parameters at a tropical station

    Science.gov (United States)

    Sugathan, Neena; Biju, V.; Renuka, G.

    2014-06-01

    Half hourly data of soil moisture content, soil temperature, solar irradiance, and reflectance are measured during April 2010 to March 2011 at a tropical station, viz., Astronomical Observatory, Thiruvananthapuram, Kerala, India (76°59'E longitude and 8°29'N latitude). The monthly, seasonal and seasonal mean diurnal variation of soil moisture content is analyzed in detail and is correlated with the rainfall measured at the same site during the period of study. The large variability in the soil moisture content is attributed to the rainfall during all the seasons and also to the evaporation/movement of water to deeper layers. The relationship of surface albedo on soil moisture content on different time scales are studied and the influence of solar elevation angle and cloud cover are also investigated. Surface albedo is found to fall exponentially with increase in soil moisture content. Soil thermal diffusivity and soil thermal conductivity are also estimated from the subsoil temperature profile. Log normal dependence of thermal diffusivity and power law dependence of thermal conductivity on soil moisture content are confirmed.

  17. Influence of soil moisture content on surface albedo and soil thermal parameters at a tropical station

    Indian Academy of Sciences (India)

    Neena Sugathan; V Biju; G Renuka

    2014-07-01

    Half hourly data of soil moisture content, soil temperature, solar irradiance, and reflectance are measured during April 2010 to March 2011 at a tropical station, viz., Astronomical Observatory, Thiruvananthapuram, Kerala, India (76° 59’E longitude and 8°29’N latitude). The monthly, seasonal and seasonal mean diurnal variation of soil moisture content is analyzed in detail and is correlated with the rainfall measured at the same site during the period of study. The large variability in the soil moisture content is attributed to the rainfall during all the seasons and also to the evaporation/movement of water to deeper layers. The relationship of surface albedo on soil moisture content on different time scales are studied and the influence of solar elevation angle and cloud cover are also investigated. Surface albedo is found to fall exponentially with increase in soil moisture content. Soil thermal diffusivity and soil thermal conductivity are also estimated from the subsoil temperature profile. Log normal dependence of thermal diffusivity and power law dependence of thermal conductivity on soil moisture content are confirmed.

  18. Advances in Atomic Force Microscopy (AFM) for investigating soil wettability states and soil organic matter (SOM) properties at the nano-scale

    Science.gov (United States)

    Gazze, Andrea; Hallin, Ingrid; Van Keulen, Geertje; Matthews, Peter; Dudely, Edward; Whalley, Richard; Quinn, Gerry; Sinclair, Kathryn; Ashton, Rhys; Doerr, Stefan; Francis, Lewis

    2017-04-01

    Many environmental processes that have a major impact at the field-scale are determined by events occurring at the micro- and nanometer scales. Due to technical challenges, soil has only relatively recently been the focus of nanoscale studies. Recent advances in Atomic Force Microscopy (AFM) now allow the characterization of natural soil samples both topographically, mechanically and chemically at the micro- to nanometer scale. To date AFM has been used for analysing materials that occur in soil ex-situ, such as minerals and organic matter as individual components; however its application to complete natural soil material has been very limited. Here we report on applications of AFM for mechanically and topographically characterising soil aggregates. Mechanical properties of interest are Young's modulus, surface deformation, adhesion and chemical mapping, all of which allow for gaining information on soil nano-mechanical properties that have implications for particle wettability. This presentation includes (i) a brief summary of recent advances in AFM capabilities and applications relevant to studying soil materials, and (ii) our latest findings in soil profiling for wettable and repellent soils, and the role of soil organic matter in affecting soil topographical and mechanical properties.

  19. Surface features on Sahara soil dust particles made visible by atomic force microscope (AFM) phase images

    OpenAIRE

    Andreae, M. O.; G. Helas

    2008-01-01

    We show that atomic force microscopy (AFM) phase images can reveal surface features of soil dust particles, which are not evident using other microscopic methods. The non-contact AFM method is able to resolve topographical structures in the nanometer range as well as to uncover repulsive atomic forces and attractive van der Waals' forces, and thus gives insight to surface properties. Though the method does not allow quantitative assignment in terms of chemical compound description, it clearly...

  20. Tunable surface properties from bioinspired polymers

    Science.gov (United States)

    van Zoelen, Wendy; Rosales, Adrianne; Murnen, Hannah; Zuckermann, Ronald; Segalman, Rachel

    2011-03-01

    Anti-fouling properties can be derived from patterned or ``ambiguous'' surfaces displaying multiple surface properties. Biological polymers with precisely controlled chain shapes and self-assembled structures are attractive materials for these applications, in which tunability is of great importance. We have investigated the surface properties of polypeptoids, a class of non-natural biomimetic polymers based on an N-substituted glycine backbone, that combine many of the advantageous properties of bulk polymers with those of synthetically produced proteins. Polypeptoids are of particular interest as they can be made in a sequence controlled fashion with functionalities already known to impart fouling-resistance (ethers, zwitterions, hydrophobicity, and nanoscale patterning). We demonstrate their surface stability and processibility from the standpoint of coating performance and also discuss controlled self-assembly of these materials. Used strategies include mediation of crystallization by incorporating chain defects and specific interactions.

  1. Properties of Forested Loess Soils After Repeated Prescribed Burns

    Science.gov (United States)

    D.M. Moehring; C.X. Grano; J.R. Bassett

    1966-01-01

    Nine annual burns have had little effect on the nutrient content and structure of the surface 4 inches of loess soils on flat terrain.Because prescribed burns must often be repeated to obtain desired results, many foresters are apprehensive about the possible deleterious effects on soils. In 1954 the Timber Management Laboratory at Crossett, Arkansas, in co-...

  2. Geochemistry Of Lead In Contaminated Soils: Effects Of Soil Physico-Chemical Properties

    Science.gov (United States)

    Saminathan, S.; Sarkar, D.; Datta, R.; Andra, S. P.

    2006-05-01

    Lead (Pb) is an environmental contaminant with proven human health effects. When assessing human health risks associated with Pb, one of the most common exposure pathways typically evaluated is soil ingestion by children. However, bioaccessibility of Pb primarily depends on the solubility and hence, the geochemical form of Pb, which in turn is a function of site specific soil chemistry. Certain fractions of ingested soil-Pb may not dissociate during digestion in the gastro-intestinal tract, and hence, may not be available for transport across the intestinal membrane. Therefore, this study is being currently performed to assess the geochemical forms and bioaccessibility of Pb in soils with varying physico-chemical properties. In order to elucidate the level of Pb that can be ingested and assimilated by humans, an in-vitro model that simulates the physiological conditions of the human digestive system has been developed and is being used in this study. Four different types of soils from the Immokalee (an acid sandy soil with minimal Pb retention potential), Millhopper (a sandy loam with high Fe/Al content), Pahokee (a muck soil with more than 80% soil organic matter), and Tobosa series (an alkaline soil with high clay content) were artificially contaminated with Pb as lead nitrate at the rate equivalent to 0, 400, 800, and 1200 mg/kg dry soil. Analysis of soils by a sequential extraction method at time zero (immediately after spiking) showed that Immokalee and Millhopper soils had the highest amount of Pb in exchangeable form, whereas Pahokee and Tobosa soils had higher percentages of carbonate-bound and Fe/Al-bound Pb. The results of in-vitro experiment at time zero showed that majority of Pb was dissolved in the acidic stomach environment in Immokalee, Millhopper, and Tobosa, whereas it was in the intestinal phase in Pahokee soils. Because the soil system is not in equilibrium at time zero, the effect of soil properties on Pb geochemistry is not clear as yet. The

  3. Responses of soil microbial respiration to plantations depend on soil properties in subtropical China

    Institute of Scientific and Technical Information of China (English)

    ZHANG Yan-jie; YAN Yue; FU Xiang-ping; YANG Jie; ZHANG Su-yan; XU Shan; TANG Zheng; LI Zhong-fang; LU Shun-bao

    2016-01-01

    Assessing the impact of plantation on microbial respiration (MR) is vitaly important to understand the interactions between belowground metabolism and land use change. In this study, cumulative MR was determined by alkali absorption method in 1, 3, 7, 14, 21, 28, 35, 42, 49, and 56 days from the soil in a representative plantations in the subtropical region of China. The treatment of plantations contained no plant (CK), orange trees (Citrus reticulata)+Bahia grass (Paspalum notatum) (GB), orange trees (C. reticulata)+Bahia grass (P.notatum)+soybean (Giycine max(L.)Merril) (GBH). Results showed that plantation had signiifcant effects on microbial respiration and the responses of microbial respiration to plantation from different soil layers and topographies were different: in 0–20 cm in uphil: GB>GBH>CK; in 20–40 cm in uphil: GBH>CK>GB; in 0–20 cm in downhil: GBH>CK>GB; in 20–40 cm in downhil: GB>CK>GBH. Furthermore, plantation also altered the relationships between MR and soil properties. In CK, microbial respiration was positively correlated with NH4+ and soil total N, and negatively correlated with soil moisture, pH, NO3–, and microbial biomass carbon (MBC). In GB, microbial respira-tion under GB signiifcantly negatively correlated with dissolved organic carbon (DOC). In GBH, microbial respiration under GBH was positively correlated with NH4+, MBC, total soil carbon (TC), and total soil nitrogen (TN), and negatively correlated with soil moisture (SM), pH, NO3–, and DOC. The underlying mechanisms could be attributed to soil heterogeneity and the effects of plantation on soil properties. Our results also showed that plantation signiifcantly increased soil C storage, which suggested plantation is a key measure to enhance soil C sequestration and mitigate global CO2 emission, especialy for the soil with low initial soil carbon content or bared soil.

  4. Effects of Soil Compaction on Carbon and Nitrogen Sequestration in Soil and Wheat, Soil Physical Properties and Aggregates Stability (Case study: Northern of Aq Qala

    Directory of Open Access Journals (Sweden)

    Z. Saieedifar

    2016-09-01

    Full Text Available Introduction: Soil compaction has become a widespread problem in the world and it is considered as one of the main factors affecting land degradation in arid and semi-arid agricultural land. Compaction in arable soils is a gradual phenomenon that appearing over time and most important factors that influence it include: soil properties, high clay content, low organic matter, and frequency of wet-dry in the soil, impervious layer of soil, load heavy agricultural implements and soil and water mismanagement. Compaction induced soil degradation affects about 68 million hectares of land globally. The vast majority of compaction in modern agriculture is caused by vehicular traffic. Carbon sequestration by long-term management operation of the plant and soil, not only increase the soil carbon storage but also lead to reduce the carbon exchange and greenhouse gases emissions like CO2 from the soil profile. The aim of this study was evaluating the effect of soil compaction on carbon and nitrogen sequestration of wheat and soil and some soil physical properties such as: aggregate stability, saturated soil moisture content, bulk density and soil porosity. Materials and Methods: This experiment was accomplished in which is located near Aq Qala in a randomized completely block design (with 4 treatments and 3 replications. Soil compaction was artificially created by using a 5/7 ton heavy tractor. The treatments arrangements were: 1 T1: control, 2 T2: twice passing of tractor, 3 T3: four time of passing tractor, and 4 T4: six time of passing heavy tractor. Utilize of all agricultural inputs (fertilizers, herbicides, etc. has been identical for all treatments. Since rain-fed farming is the common method to cultivation of cereals in the study area, so no complementary irrigation was carried out in this period. In this study, after the measurement of the parameters, the data were analyzed by using SPSS 16.0 Software. LSD test was used for comparison of means

  5. Water Repellency, Infiltration and Water Retention Properties of Forest Soils Under Different Management Practices

    Science.gov (United States)

    Wahl, N. A.; Bens, O.; Schäfer, B.; Hüttl, R. F.

    For soils under both agricultural and forest use, management and tillage practice can have significant influence on the hydraulic properties. It is therefore supposed, that management practices are capable of altering surface runoff, water retention and flood- ing risk for river catchments. Soil water repellency (hydrophobicity) can adversely affect soil hydrological properties, e.g. reduce infiltration capacity and induce pref- erential flow, thus enhancing the overall risk of flooding in river catchment areas. Hydrophobic effects are especially pronounced in coniferous forest soils. Investigations were carried out on several study plots in the German Northeastern Lowlands, located app. 50 km NE of Berlin in Brandenburg. Soils found in the area are mainly of glacifluvial origin with a pronounced sandy texture (with medium sized sand dominating). The four stands investigated represent different stages of forest transfor- mation, in a sense of a SfalseT chronosequence and are made up of populations of & cedil;Pinus sylvestris and Fagus sylvatica of different ages. Infiltration was measured with hood infiltrometers, and single infiltration rings at soil surface. Water retention capacity and the influence of soil organic matter on water storage were evaluated with laboratory methods. Water repellency was quantified with the water drop penetration time (WDPT) test, for determining the persistence of water repellency, and the ethanol percentage (EP) test, for measuring the severity/degree of water repellency. Soil samples from the four forest plots and different soil depths (0U160 cm) were used for the measurements. SPotentialT water repellencies were & cedil;determined after 3-day oven-drying at 45 C. The results indicate that for sandy forest soils, the overall infiltration capacity of the plots is low due to the effects of water repellency. The inter-variability of the plots is mainly caused by changes in the textural composition of the soils. For all plots a

  6. Restoring the natural state of the soil surface by biocrusts

    Science.gov (United States)

    Zaady, Eli; Ungar, Eugene D.; Stavi, Ilan; Shuker, Shimshon; Knoll, Yaakov M.

    2017-04-01

    In arid and semi-arid areas, with mean annual precipitation of 70-200 mm, the dominant component of the ground cover is biocrusts composed of cyanobacteria, moss and lichens. Biocrusts play a role in stabilizing the soil surface, which reduces erosion by water and wind. Human disturbances, such as heavy vehicular traffic, earthworks, overgrazing and land mining destroy the soil surface and promote erosion. The aim of the study was to evaluate restoration of the soil surface by the return of a biocrust layer. We examined the impact of disturbances on the creation of a stable crust and on the rate of recovery. Biocrust disturbance was studied in two sites in the northern Negev. The nine treatments included different rates of biocrust inoculum application and NPK fertilization. Recovery rates of the biocrusts were monitored for five years using chemical, physical and bio-physiological tests which determined infiltration rate, soil surface resistance to pressure, shear force of the soil surface, levels of chlorophyll, organic matter and polysaccharide, NDVI and aggregate stability. The results show that untreated disturbed biocrusts present long-term damage and a very slow rate of recovery, which may take decades, while most of the treatments showed a faster recovery. In particular, NDVI, polysaccharide levels and aggregate stability showed steady improvements over the research period.

  7. Effect of Electrolytes on Surface Charge Characteristics of Red Soils

    Institute of Scientific and Technical Information of China (English)

    SHAOZONG-CHEN; HEQUN; 等

    1992-01-01

    The zero point of charge (ZPC) and the remaining charge σp at ZPC are two important parameters characterizing surface charge of red soils.Fourteen red soil samples of different soil type and parent material were treated with dithionite-citrate-dicarbonate (DCB) and Na2CO3 respectively.ZPC and σp of the samples in three indifferent electrolytes (NaCl,Na2SO4,and NaH2PO4) were determined.Kaolinite was used as reference.The results showed that ZPC of red soils was affected by the composition of parent materials and clay minerals and in significantly positive correlation with the content of total iron oxide (Fet),free iron oxide (Fed),amorphous iron oxide (Feo),aluminum oxide (Alo) and clay,but it was negatively correlated with the content of total silica (Sit).The σp of red soils was also markedly influenced by mineral components.Organic components were also contributing factor to the value of σp.The surface charges of red soils were evidently affected by the constitution of the electrolytes.Specific adsorption of anions in the electrolytes tended to make the ZPC of red soils shift to a higher pH value and to increase positive surface charges of the soils,thus leading to change of the σp value and decrease of the remaining net negative charges,even to the soils becoming net positive charge carriers.The effect of phosphate anion was greater than that of sulfate ion.

  8. Relationship Between Iron Oxides and Surface Charge Characteristics in Soils

    Institute of Scientific and Technical Information of China (English)

    SHAOZONG-CHEN; WANGWEI-JUN

    1991-01-01

    The relationship between iron oxides and surface charge characteristics in variable charge soils (latosol and red earth) was studied in following three ways.(1)Remove free iron oxides (Fed) and amorphous iron oxides (Feo) from the soils with sodium dithionite and acid ammonium oxalate solution respectively.(2) Add 2% glucose (on the basis of air-dry soil weight) to soils and incubate under submerged condition to activate iron oxides,and then the mixtures are dehydrated and air-dried to age iron oxides.(3) Precipitate various crystalline forms of iron oxides onto kaolinite.The results showed that free iron oxides (Fed) were the chief carrier of variable positive charges.Of which crystalline iron oxides (Fed-Feo) presented mainly as discrete particles in the soils and could only play a role of the carrier of positive charges,and did little influence on negative charges.Whereas the amorphous iron oxides (Feo),which presented mainly fas a coating with a large specific surface area,not only had positive charges,but also blocked the negative charge sites in soils.Submerged incubation activated iron oxides in the soils,and increased the amount of amorphous iron oxides and the degree of activation of iron oxide,which resulted in the increase of positive and negative charges of soils.Dehydration and air-dry aged iron oxides in soils and decreased the amount of amorphous iron oxides and the degree of activation of iron oxide,and also led to the decrease of positive and negative charges.Both the submerged incubation and the dehydration and air-dry had no significant influence on net charges.Precipitation of iron oxides onto kaolinite markedly increased positive charges and decreased negative charges.Amorphous iron oxide having a larger surface area contributed more positive charge sites and blocked more negative charge sites in kaolinite than crystalline goethite.

  9. Metrology and properties of engineering surfaces

    CERN Document Server

    Greenwood, J; Chetwynd, D

    2001-01-01

    Metrology and Properties of Engineering Surfaces provides in a single volume a comprehensive and authoritative treatment of the crucial topics involved in the metrology and properties of engineering surfaces. The subject matter is a central issue in manufacturing technology, since the quality and reliability of manufactured components depend greatly upon the selection and qualities of the appropriate materials as ascertained through measurement. The book can in broad terms be split into two parts; the first deals with the metrology of engineering surfaces and covers the important issues relating to the measurement and characterization of surfaces in both two and three dimensions. This covers topics such as filtering, power spectral densities, autocorrelation functions and the use of Fractals in topography. A significant proportion is dedicated to the calibration of scanning probe microscopes using the latest techniques. The remainder of the book deals with the properties of engineering surfaces and covers a w...

  10. A combination of biochar-mineral complexes and compost improves soil bacterial processes, soil quality and plant properties

    Directory of Open Access Journals (Sweden)

    JUN eYE

    2016-04-01

    Full Text Available Organic farming avoids the use of synthetic fertilizers and promises food production with minimal environmental impact, however this farming practice does not often result in the same productivity as conventional farming. In recent years, biochar has received increasing attention as an agricultural amendment and by coating it with minerals to form biochar-mineral complex (BMC carbon retention and nutrient availability can be improved. However, little is known about the potential of BMC in improving organic farming. We therefore investigated here how soil, bacterial and plant properties respond to a combined treatment of BMC and an organic fertilizer, i.e. a compost based on poultry manure. In a pakchoi pot trial, BMC and compost showed synergistic effects on soil properties, and specifically by increasing nitrate content. Soil nitrate has been previously observed to increase leaf size and we correspondingly saw an increase in the surface area of pakchoi leaves under the combined treatment of BMC and chicken manure. The increase in soil nitrate was also correlated with an enrichment of bacterial nitrifiers due to BMC. Additionally, we observed that the bacteria present in the compost treatment had a high turnover, which likely facilitated organic matter degradation and a reduction of potential pathogens derived from the manure. Overall our results demonstrate that a combination of BMC and compost can stimulate microbial process in organic farming that result in better vegetable production and improved soil properties for sustainable farming.

  11. Impact of temperature on the biological properties of soil

    Science.gov (United States)

    Borowik, Agata; Wyszkowska, Jadwiga

    2016-01-01

    The aim of the study was to determine the response of soil microorganisms and enzymes to the temperature of soil. The effect of the temperatures: 5, 10, 15, 20, and 25°C on the biological properties of soil was investigated under laboratory conditions. The study was performed using four different soils differing in their granulometric composition. It was found that 15°C was the optimal temperature for the development of microorganisms in soil. Typically, in the soil, the highest activity of dehydrogenases was observed at 10-15°C, catalase and acid phosphatase - at 15°C, alkaline phosphatase at 20°C, urease and β-glucosidase at 25°C. The highest colony development index for heterotrophic bacteria was recorded in soils incubated at 25°C, while for actinomycetes and fungi at 15°C. The incubation temperature of soil only slightly changed the ecophysiological variety of the investigated groups of microorganisms. Therefore, the observed climate changes might have a limited impact on the soil microbiological activity, because of the high ability of microorganisms to adopt. The response of soil microorganisms and enzymes was more dependent on the soil granulometric composition, organic carbon, and total nitrogen than on its temperature.

  12. [Spatial variation characteristics of surface soil water content, bulk density and saturated hydraulic conductivity on Karst slopes].

    Science.gov (United States)

    Zhang, Chuan; Chen, Hong-Song; Zhang, Wei; Nie, Yun-Peng; Ye, Ying-Ying; Wang, Ke-Lin

    2014-06-01

    Surface soil water-physical properties play a decisive role in the dynamics of deep soil water. Knowledge of their spatial variation is helpful in understanding the processes of rainfall infiltration and runoff generation, which will contribute to the reasonable utilization of soil water resources in mountainous areas. Based on a grid sampling scheme (10 m x 10 m) and geostatistical methods, this paper aimed to study the spatial variability of surface (0-10 cm) soil water content, soil bulk density and saturated hydraulic conductivity on a typical shrub slope (90 m x 120 m, projected length) in Karst area of northwest Guangxi, southwest China. The results showed that the surface soil water content, bulk density and saturated hydraulic conductivity had different spatial dependence and spatial structure. Sample variogram of the soil water content was fitted well by Gaussian models with the nugget effect, while soil bulk density and saturated hydraulic conductivity were fitted well by exponential models with the nugget effect. Variability of soil water content showed strong spatial dependence, while the soil bulk density and saturated hydraulic conductivity showed moderate spatial dependence. The spatial ranges of the soil water content and saturated hydraulic conductivity were small, while that of the soil bulk density was much bigger. In general, the soil water content increased with the increase of altitude while it was opposite for the soil bulk densi- ty. However, the soil saturated hydraulic conductivity had a random distribution of large amounts of small patches, showing high spatial heterogeneity. Soil water content negatively (P conductivity, while there was no significant correlation between the soil bulk density and saturated hydraulic conductivity.

  13. Relationship between Soil Properties and Plant Diversity in Semiarid Grassland

    Directory of Open Access Journals (Sweden)

    Melda Dölarslan

    2017-07-01

    Full Text Available In ecological studies, soil-plant interaction is an important environmental factor. Soil chemical and physical properties affect plant richness and diversity. This study was carried out to investigate the relationship between soil physical and chemical properties, and plant diversity indexes (Shannon-Weiner and Simpson in semiarid grassland. Plant diversity indexes and soil properties were determined using 34 quadrats (5x5m on different parent materials (chrome, marble, serpentine, red chalk and red chalk mostra in semiarid grasslands in the Central Anatolia Region in Turkey. Plant samples were collected and recorded periodically from April to September (the vegetation period in 2014 for each quadrat. In order to determine the plant richness and diversity indexes, 3 sub-quadrats (1x1m were randomly added into each of 34 (5x5 m quadrats. To evaluate the relationship between plant diversity indexes and soil properties, composite soil samples were collected from the four corners, and the center of each quadrat 0-30 cm in depth, and which was mixing of those subsamples. Soil sand-silt-clay contents, soil reaction (pH, bulk density (BD, electrical conductivity (EC, CaCO3 and soil organic matter (SOM contents were measured. Relationship between plant diversity indexes measured in different months during vegetation period and soil properties of different parent material was statistically analysed using correlation analysis in SPSS 20.0. Modest correlation coefficient was found between the Simpson diversity index and SOM content, sand-silt-clay content, pH and EC for different months in vegetation period.

  14. [Relationships between soil microbial ecological characteristics and physical-chemical properties of vegetable garden soil].

    Science.gov (United States)

    Li, Ning; Li, Huaxing; Zhu, Fengjiao; Liu, Yuanjin; Kuang, Peirui

    2006-02-01

    The study on the 64 vegetable garden soil samples in the Baiyuan District of Guangzhou City showed that there were significantly positive correlations of soil microbial biomass carbon (Cmic) with soil total N, alkali-hydrolygable N, available K, cation exchange capacity (CEC) and organic matter (OM), of soil microbial biomass nitrogen (Nmic) with soil total N, total P, CEC and OM, of soil basal respiration (SBR) with soil total N, alkali-hydrolygable N, available K, CEC and OM, of AWCD with soil total N and OM, and of Shannon diversity index with soil total N and CEC. Low alkali-hydrolygable N increased Cmic SBR, and metabolic quotient (qCO2), while high alkali-hydrolygable N decreased qCO2. High available P decreased Cmic, Nmic and microbial quotient, and a high ratio of available P to alkali-hydrolygable N was related to the decrease of Cmic, Nmic, Cmic/Nmic and SBR. It was suggested that there were significant correlations between soil microbial ecological characteristics and physico-chemical properties, and excessive available nutrients or inappropriate ratios of alkali-hydrolygable N to available P in soil were harmful to soil microbes.

  15. Using Multispectral and Elevation Data to Predict Soil Properties for a Better Management of Fertilizers at Field Scale

    Science.gov (United States)

    Drouin, Ariane; Michaud, Aubert; Sylvain, Jean-Daniel; N'Dayegamiye, Adrien; Gasser, Marc-Olivier; Nolin, Michel; Perron, Isabelle; Grenon, Lucie; Beaudin, Isabelle; Desjardins, Jacques; Côté, Noémi

    2013-04-01

    This project aims at developing and validating an operational integrated management and localized approach at field scale using remote sensing data. It is realized in order to support the competitiveness of agricultural businesses, to ensure soil productivity in the long term and prevent diffuse contamination of surface waters. Our intention is to help agrienvironmental advisors and farmers in the consideration of spatial variability of soil properties in the management of fields. The proposed approach of soil properties recognition is based on the combination of elevation data and multispectral satellite imagery (Landsat) within statistical models. The method is based on the use of the largest possible number of satellite images to cover the widest range of soil moisture variability. Several spectral indices are calculated for each image (normalized brightness index, soil color index, organic matter index, etc.). The assignation of soils is based on a calibration procedure making use of the spatial soil database available in Canada. It includes soil profile point data associated to a database containing the information collected in the field. Three soil properties are predicted and mapped: A horizon texture, B horizon texture and drainage class. All the spectral indices, elevation data and soil data are combined in a discriminant analysis that produces discriminant functions. These are then used to produce maps of soil properties. In addition, from mapping soil properties, management zones are delineated within the field. The delineation of management zones with relatively similar soil properties is created to enable farmers to manage their fertilizers by taking greater account of their soils. This localized or precision management aims to adjust the application of fertilizer according to the real needs of soils and to reduce costs for farmers and the exports of nutrients to the stream. Mapping of soil properties will be validated in three agricultural regions in

  16. Impact of soil types and management practices on soil microbiological properties - a case study in salt affected area of Hungary

    Science.gov (United States)

    Gangwar, Ravi Kumar; Makádi, Marianna; Michéli, Erika; Weldmichael, Tsedekech G.; Szegi, Tamás

    2017-04-01

    The impact of different land use systems on soil microbiological properties in salt affected soils were investigated in the Nádudvar region of Hajdu-Bihar County, Hungary. The study area is characterized by associations of Solonetz and Chernozem soils. Soils were collected from both arable (cultivated) and pasture (non-cultivated) land from the upper 15 cm, in May, 2016. Besides soil physical and chemical properties (SOM, pH, CaCO3, EC, E4/E6, available macro, meso and micro nutrients and moisture content), soil microbiological properties were also investigated, phosphatase and dehydrogenase activities of the samples were measured, as well as soil microbial biomass carbon (MBC) and soil microbiological respiration. The results were statistically compared on the different soil types and land uses. It was concluded that land management has greater impact on soil microbiology than inherent properties or soil types.

  17. Surface properties-vehicle interaction

    Energy Technology Data Exchange (ETDEWEB)

    Huft, D.L.; Her, I.; Agrawal, S.K.; Zimmer, R.A.; Bester, C.J.

    1984-01-01

    The 10 papers in the report deal with the following areas: South Dakota profilometer; development of a data-acquisition method for noncontact pavement macrotexture measurement; traction of an aircraft tire on grooved and porous asphaltic concrete; holes in the pavement-an assessment of their influence on safety; effect of pavement type and condition on the fuel consumption of vehicles; traction loss of a suspended tire on a sinusoidal road; effect of vehicle and driver characteristics on the psychological evaluation of road roughness; correlation of subjective panel ratings of pavement ride quality with profilometer-derived measures of pavement roughness; microprocessor-based noncontact distance measuring control system; and, representation of pavement-surface topography in predicting runoff depths and hydroplaning potential.

  18. Soil Properties Database of Spanish Soils; Base de Datos de Propiedades Edafologicas de los Suelos Espanoles

    Energy Technology Data Exchange (ETDEWEB)

    Trueba, C.; Millan, R.; Schmid, T. [CIEMAT. Madrid (Spain); Roquero, C.; Magister, M. [UPM. Madrid (Spain)

    1998-12-31

    The soil vulnerability determines the sensitivity of the soil after an accidental radioactive contamination due to Cs-137 and Sr-90. The Departamento de Impacto Ambiental de la Energia of CIEMAT is carrying out an assessment of the radiological vulnerability of the different Spanish soils found on the Iberian Peninsula. This requires the knowledge of the soil properties for the various types of existing soils. In order to achieve this aim, a bibliographical compilation of soil profiles has been made to characterize the different soil types and create a database of their properties. Depending on the year of publication and the type of documentary source, the information compiled from the available bibliography is very heterogeneous. Therefore, an important effort has been made to normalize and process the information prior to its incorporation to the database. This volume presents the criteria applied to normalize and process the data as the soil properties of the various soil types belonging to the Comunidad Autonoma de Madrid. (Author) 39 refs.

  19. Stimulatory effects of arsenic-tolerant soil fungi on plant growth promotion and soil properties.

    Science.gov (United States)

    Srivastava, Pankaj Kumar; Shenoy, Belle Damodara; Gupta, Manjul; Vaish, Aradhana; Mannan, Shivee; Singh, Nandita; Tewari, Shri Krishna; Tripathi, Rudra Deo

    2012-01-01

    Fifteen fungi were obtained from arsenic-contaminated agricultural fields in West Bengal, India and examined for their arsenic tolerance and removal ability in our previous study. Of these, the four best arsenic-remediating isolates were tested for plant growth promotion effects on rice and pea in the present study. A greenhouse-based pot experiment was conducted using soil inocula of individual fungi. The results indicated a significant (Psoil properties in inoculated soils compared to the control. A significant increase in plant growth was recorded in treated soils and varied from 16-293%. Soil chemical and enzymatic properties varied from 20-222% and 34-760%, respectively, in inoculated soil. Plants inoculated with inocula of Westerdykella and Trichoderma showed better stimulatory effects on plant growth and soil nutrient availability than Rhizopus and Lasiodiplodia. These fungi improved soil nutrient content and enhanced plant growth. These fungi may be used as bioinoculants for plant growth promotion and improved soil properties in arsenic-contaminated agricultural soils.

  20. Effects of poultry manure on soil biochemical properties in phthalic acid esters contaminated soil.

    Science.gov (United States)

    Gao, Jun; Qin, Xiaojian; Ren, Xuqin; Zhou, Haifeng

    2015-12-01

    This study aimed to evaluate the effects of poultry manure (PM) on soil biological properties in DBP- and DEHP-contaminated soils. An indoor incubation experiment was conducted. Soil microbial biomass C (Cmic), soil enzymatic activities, and microbial phospholipid fatty acid (PLFA) concentrations were measured during incubation period. The results indicated that except alkaline phosphatase activity, DBP and DEHP had negative effects on Cmic, dehydrogenase, urease, protease activities, and contents of total PLFA. However, 5 % PM treatment alleviated the negative effects of PAEs on the above biochemical parameters. In DBP-contaminated soil, 5 % PM amendment even resulted in dehydroenase activity and Cmic content increasing by 17.8 and 11.8 % on the day 15 of incubation, respectively. During the incubation periods, the total PLFA contents decreased maximumly by 17.2 and 11.6 % in DBP- and DEHP-contaminated soils without PM amendments, respectively. Compared with those in uncontaminated soil, the total PLFA contents increased slightly and the value of bacPLFA/fugalPLFA increased significantly in PAE-contaminated soils with 5 % PM amendment. Nevertheless, in both contaminated soils, the effects of 5 % PM amendment on the biochemical parameters were not observed with 10 % PM amendment. In 10 % PM-amended soils, DBP and DEHP had little effect on Cmic, soil enzymatic activities, and microbial community composition. At the end of incubation, the effects of PAEs on these parameters disappeared, irrespective of PM amendment. The application of PM ameliorated the negative effect of PAEs on soil biological environment. However, further work is needed to study the effect of PM on soil microbial gene expression in order to explain the change mechanisms of soil biological properties.

  1. Estimation of effective hydrologic properties of soils from observations of vegetation density. M.S. Thesis; [water balance of watersheds in Clinton, Maine and Santa Paula, California

    Science.gov (United States)

    Tellers, T. E.

    1980-01-01

    An existing one-dimensional model of the annual water balance is reviewed. Slight improvements are made in the method of calculating the bare soil component of evaporation, and in the way surface retention is handled. A natural selection hypothesis, which specifies the equilibrium vegetation density for a given, water limited, climate-soil system, is verified through comparisons with observed data and is employed in the annual water balance of watersheds in Clinton, Ma., and Santa Paula, Ca., to estimate effective areal average soil properties. Comparison of CDF's of annual basin yield derived using these soil properties with observed CDF's provides excellent verification of the soil-selection procedure. This method of parameterization of the land surface should be useful with present global circulation models, enabling them to account for both the non-linearity in the relationship between soil moisture flux and soil moisture concentration, and the variability of soil properties from place to place over the Earth's surface.

  2. Experimental determination of thermal properties of alluvial soil

    Science.gov (United States)

    Kulkarni, N. G.; Bhandarkar, U. V.; Puranik, B. P.; Rao, A. B.

    2016-12-01

    In the present work, thermal conductivity and specific heat of a particular type of alluvial soil used in brick making in a certain region of India (Karad, Maharashtra State) are experimentally determined for later use in the estimation of ground heat loss in clamp type kilns. These properties are determined simultaneously using the steady-state and the transient temperature data measured in the setup constructed for this purpose. Additionally, physical properties of the soil are experimentally determined for use with six models for the prediction of the thermal conductivity of soil. The predictions from the models are compared with the experimental data. A separate data fitting exercise revealed a small temperature dependence of the soil thermal conductivity on the soil mean temperature.

  3. Effects of Soil properties on phosphorus subsurface migration in sandy soils

    Institute of Scientific and Technical Information of China (English)

    ZHANG Ming-Kui

    2008-01-01

    The soil factors influencing the potential migration of dissolved and particulate phosphorus (P) from structurallyweak sandy subsoils were evaluated by means of soil column leaching experiments.Soil colloids were extracted from two types of soils to make the colloid-bound forms of P solution.Eight sandy soils with diverse properties were collected for packing soil columns.The effects of influent solutions varying in concentrations of colloids,P,and electrolyte,on the transport of P and quality of leachates were characterized.P migration in the soils was soil property-dependent.High soil electrical conductivity values retarded the mobility of colloids and transportability of colloid-associated P (particulate P).Soil electrical conductivity was negatively correlated with colloids and reactive particulate P (RPP) concentrations in the leachates,whereas,the total reactive P (TRP) and dissolved reactive P (DRP) concentrations in the leachates were mainly controlled by the P adsorption capacity and the P levels in the subsoil.The reactive particulate P in the leachates was positively correlated with the colloidal concentration.Increased colloidal concentration in the influent could significantly increase the colloidal concentration in the leachates.Elevated P concentration in the influent had little effect on P recovery in the leachates,but it resulted in significant increases in the absolute P concentration in the leachates.

  4. Soil carbon and soil physical properties response to incorporating mulched forest slash

    Science.gov (United States)

    Felipe G. Sanchez; Emily A. Carter; John. F. Klepac

    2000-01-01

    A study was installed in the Lower Coastal Plain near Washington, NC, to test the hypothesis that incorporating organic matter in the form of comminuted forest slash would increase soil carbon and nutrient pools, and alter soil physical properties to favor pine growth. Two sites were selected, an organic and a mineral site, to compare the treatment effects on...

  5. Predicting soil N mineralization: Relevance of organic matter fractions and soil properties.

    NARCIS (Netherlands)

    Ros, G.H.; Hanegraaf, M.C.; Hoffland, E.; Riemsdijk, van W.H.

    2011-01-01

    Distinct extractable organic matter (EOM) fractions have been used to assess the capacity of soils to supply nitrogen (N). However, substantial uncertainty exists on their role in the N cycle and their functional dependency on soil properties. We therefore examined the variation in mineralizable N

  6. [Distribution of soil organic carbon in surface soil along a precipitation gradient in loess hilly area].

    Science.gov (United States)

    Sun, Long; Zhang, Guang-hui; Luan, Li-li; Li, Zhen-wei; Geng, Ren

    2016-02-01

    Along the 368-591 mm precipitation gradient, 7 survey sites, i.e. a total 63 investigated plots were selected. At each sites, woodland, grassland, and cropland with similar restoration age were selected to investigate soil organic carbon distribution in surface soil (0-30 cm), and the influence of factors, e.g. climate, soil depth, and land uses, on soil organic carbon distribution were analyzed. The result showed that, along the precipitation gradient, the grassland (8.70 g . kg-1) > woodland (7.88 g . kg-1) > farmland (7.73 g . kg-1) in concentration and the grassland (20.28 kg . m-2) > farmland (19.34 kg . m-2) > woodland (17.14 kg . m-2) in density. The differences of soil organic carbon concentration of three land uses were not significant. Further analysis of pooled data of three land uses showed that the surface soil organic carbon concentration differed significantly at different precipitation levels (Psoil organic carbon concentration (r=0.838, Psoil organic carbon increased with annual precipitation 0. 04 g . kg-1 . mm-1, density 0.08 kg . m-2 . mm-1. The soil organic carbon distribution was predicted with mean annual precipitation, soil clay content, plant litter in woodland, and root density in farmland.

  7. Selection harvests in Amazonian rainforests: long-term impacts on soil properties

    Science.gov (United States)

    K.L. McNabb; M.S. Miller; B.G. Lockaby; B.J. Stokes; R.G. Clawson; John A. Stanturf; J.N.M. Silva

    1997-01-01

    Surface soil properties were compared among disturbance classes associated with a single-tree selection harvest study installed in 1979 in the Brazilian Amazon. Response variables included pH, total N, total organic C, extractable P, exchangeable K, Ca, Mg, and bulk density. In general, concentrations of all elements displayed residual effects 16 years after harvests...

  8. Surface features on Sahara soil dust particles made visible by atomic force microscope (AFM) phase images

    Science.gov (United States)

    Helas, G.; Andreae, M. O.

    2008-10-01

    We show that atomic force microscopy (AFM) phase images can reveal surface features of soil dust particles, which are not evident using other microscopic methods. The non-contact AFM method is able to resolve topographical structures in the nanometer range as well as to uncover repulsive atomic forces and attractive van der Waals' forces, and thus gives insight to surface properties. Though the method does not allow quantitative assignment in terms of chemical compound description, it clearly shows deposits of distinguishable material on the surface. We apply this technique to dust aerosol particles from the Sahara collected over the Atlantic Ocean and describe micro-features on the surfaces of such particles.

  9. Surface-Correlated Nanophase Iron Metal in Lunar Soils: Petrography and Space Weathering Effects

    Science.gov (United States)

    Keller, Lindsay P.; Wentworth, Susan J.; McKay, David S.

    1998-01-01

    Space weathering is a term used to include all of the processes that act on material exposed at the surface of a planetary or small body. In the case of the Moon, it includes a variety of processes that formed the lunar regolith, caused the maturation of lunar soils, and formed patina on rock surfaces. The processes include micrometeorite impact and reworking, implantation of solar wind and flare particles, radiation damage and chemical effects from solar particles and cosmic rays, interactions with the lunar atmosphere, and sputtering erosion and deposition. Space weathering effects collectively result in a reddened continuum slope, lowered albedo, and attenuated absorption features in reflectance spectra of lunar soils as compared to finely comminuted rocks from the same Apollo sites. Understanding these effects is critical in order to fully integrate the lunar sample collection with remotely sensed data from recent robotic missions (e.g., Lunar Prospector, Clementine, Galileo). Our objective is to determine the origin of space weathering effects in lunar soils through combined electron microscopy and microspectrophotometry techniques applied to individual soil particles from lunar soils. It has been demonstrated that it is the finest size fraction (lunar soils that dominates the optical properties of the bulk soils.

  10. Simulation of Tillage Systems Impact on Soil Biophysical Properties Using the SALUS Model

    Directory of Open Access Journals (Sweden)

    Luigi Sartori

    2011-02-01

    Full Text Available A sustainable land management has been defined as the management system that allows for production, while minimizing risk, maintaining quality of soil and water. Tillage systems can significantly decrease soil carbon storage and influence the soil environment of a crop. Crop growth models can be useful tools in evaluating the impact of different tillage systems on soil biophysical properties and on the growth and final yield of the crops. The objectives of this paper were i to illustrate the SALUS model and its tillage component; ii to evaluate the effects of different tillage systems on water infiltration and time to ponding, iii to simulate the effect of tillage systems on some soil biophysical properties. The SALUS (System Approach to Land Use Sustainability model is designed to simulate continuous crop, soil, water and nutrient conditions under different tillage and crop residues management strategies for multiple years. Predictions of changes in surface residue, bulk density, runoff, drainage and evaporation were consistent with expected behaviours of these parameters as described in the literature. The experiment to estimate the time to ponding curve under different tillage system confirmed the theory and showed the beneficial effects of the residue on soil surface with respect to water infiltration. It also showed that the no-tillage system is a more appropriate system to adopt in areas characterized by high intensity rainfall.

  11. Modeling multidomain hydraulic properties of shrink-swell soils

    Science.gov (United States)

    Stewart, Ryan D.; Abou Najm, Majdi R.; Rupp, David E.; Selker, John S.

    2016-10-01

    Shrink-swell soils crack and become compacted as they dry, changing properties such as bulk density and hydraulic conductivity. Multidomain models divide soil into independent realms that allow soil cracks to be incorporated into classical flow and transport models. Incongruously, most applications of multidomain models assume that the porosity distributions, bulk density, and effective saturated hydraulic conductivity of the soil are constant. This study builds on a recently derived soil shrinkage model to develop a new multidomain, dual-permeability model that can accurately predict variations in soil hydraulic properties due to dynamic changes in crack size and connectivity. The model only requires estimates of soil gravimetric water content and a minimal set of parameters, all of which can be determined using laboratory and/or field measurements. We apply the model to eight clayey soils, and demonstrate its ability to quantify variations in volumetric water content (as can be determined during measurement of a soil water characteristic curve) and transient saturated hydraulic conductivity, Ks (as can be measured using infiltration tests). The proposed model is able to capture observed variations in Ks of one to more than two orders of magnitude. In contrast, other dual-permeability models assume that Ks is constant, resulting in the potential for large error when predicting water movement through shrink-swell soils. Overall, the multidomain model presented here successfully quantifies fluctuations in the hydraulic properties of shrink-swell soil matrices, and are suitable for use in physical flow and transport models based on Darcy's Law, the Richards Equation, and the advection-dispersion equation.

  12. Pharmaceuticals' sorptions relative to properties of thirteen different soils.

    Science.gov (United States)

    Kodešová, Radka; Grabic, Roman; Kočárek, Martin; Klement, Aleš; Golovko, Oksana; Fér, Miroslav; Nikodem, Antonín; Jakšík, Ondřej

    2015-04-01

    Transport of human and veterinary pharmaceuticals in soils and consequent ground-water contamination are influenced by many factors, including compound sorption on soil particles. Here we evaluate the sorption isotherms for 7 pharmaceuticals on 13 soils, described by Freundlich equations, and assess the impact of soil properties on various pharmaceuticals' sorption on soils. Sorption of ionizable pharmaceuticals was, in many cases, highly affected by soil pH. The sorption coefficient of sulfamethoxazole was negatively correlated to soil pH, and thus positively related to hydrolytic acidity and exchangeable acidity. Sorption coefficients for clindamycin and clarithromycin were positively related to soil pH and thus negatively related to hydrolytic acidity and exchangeable acidity, and positively related to base cation saturation. The sorption coefficients for the remaining pharmaceuticals (trimethoprim, metoprolol, atenolol, and carbamazepine) were also positively correlated with the base cation saturation and cation exchange capacity. Positive correlations between sorption coefficients and clay content were found for clindamycin, clarithromycin, atenolol, and metoprolol. Positive correlations between sorption coefficients and organic carbon content were obtained for trimethoprim and carbamazepine. Pedotransfer rules for predicting sorption coefficients of various pharmaceuticals included hydrolytic acidity (sulfamethoxazole), organic carbon content (trimethoprimand carbamazepine), base cation saturation (atenolol and metoprolol), exchangeable acidity and clay content (clindamycin), and soil active pH and clay content (clarithromycin). Pedotransfer rules, predicting the Freundlich sorption coefficients, could be applied for prediction of pharmaceutical mobility in soils with similar soil properties. Predicted sorption coefficients together with pharmaceutical half-lives and other imputes (e.g., soil-hydraulic, geological, hydro-geological, climatic) may be used for

  13. Sorption of roxarsone onto soils with different physicochemical properties.

    Science.gov (United States)

    Fu, Qing-Long; He, Jian-Zhou; Blaney, Lee; Zhou, Dong-Mei

    2016-09-01

    Elevated roxarsone (ROX) concentrations in soils, caused by land application of ROX-bearing poultry litter, mandate investigation of ROX sorption onto soils. Equilibrium and kinetic studies of ROX sorption onto five soils were carried out to explore the relationship between sorption parameters and soil properties, and to reveal the effects of coexisting humic acid (HA), P(V), As(V), and As(III) on ROX transport. Experimental results indicated that ROX sorption reached equilibrium within 24 h, with pseudo-second order rate constants of 5.74-5.26 × 10(2) g/(mg h); film and intra-particle diffusion were the rate-limiting processes. ROX sorption to soils involved partitioning and adsorption phenomena; however, their relative contributions varied for different soils. The maximum ROX sorption varied with soil type, ranging from 0.59 to 4.12 mg/g. Results from correlation analysis and multiple linear regressions revealed that the maximum sorption capacities, partition coefficients, and desorption percentages were correlated with soil properties, especially iron content, total organic carbon, and dissolved organic carbon. ROX sorption to soils was affected more by soil pH than the initial pH of ROX-containing solutions. Carboxylic and amide functional groups were determined to be responsible for ROX sorption to soils. ROX sorption capacities decreased in the presence of HA, P(V), As(V), and As(III), indicating that ROX mobility in soils was facilitated by dissolved organic matter (DOM) and competing anions.

  14. Predicting the impact of biochar additions on soil hydraulic properties

    Science.gov (United States)

    Spokas, Kurt; Lim, Tae Jun; Feyereisen, Gary; Novak, Jeff

    2015-04-01

    Different physical and chemical properties of biochar, which is made out of a variety of biomass materials, can impact water movement through amended soil. The objective of this research was to develop a decision support tool predicting the impact of biochar additions on soil saturated hydraulic conductivity (Ksat). Four different kinds of biochar were added to four different textured soils (coarse sand, fine sand, loam, and clay texture) to assess these effects at the rates of 0, 1, 2, and 5 % (w/w). The Ksat of the biochar amended soils were significantly influenced by the rate and type of biochar, as well as the original particle size of soil. The Ksat decreased when biochar was added to coarse and fine sands. Biochar with larger particles sizes (60%; >1 mm) decreased Ksat to a larger degree than the smaller particle size biochar (60%; soils. Increasing tortuosity in the amended sandy soil could explain this behavior. On the other hand, for the clay loam 1% and 2% biochar additions universally increased the Ksat with higher biochar amounts providing no further alterations. The developed model utilizes soil texture pedotransfer functions for predicting agricultural soil Ksat as a function of soil texture. The model accurately predicted the direction of the Ksat influence, even though the exact magnitude still requires further refinement.

  15. Soil property maps of Africa at 250 m resolution

    Science.gov (United States)

    Kempen, Bas; Hengl, Tomislav; Heuvelink, Gerard B. M.; Leenaars, Johan G. B.; Walsh, Markus G.; MacMillan, Robert A.; Mendes de Jesus, Jorge S.; Shepherd, Keith; Sila, Andrew; Desta, Lulseged T.; Tondoh, Jérôme E.

    2015-04-01

    Vast areas of arable land in sub-Saharan Africa suffer from low soil fertility and physical soil constraints, and significant amounts of nutrients are lost yearly due to unsustainable soil management practices. At the same time it is expected that agriculture in Africa must intensify to meet the growing demand for food and fiber the next decades. Protection and sustainable management of Africa's soil resources is crucial to achieve this. In this context, comprehensive, accurate and up-to-date soil information is an essential input to any agricultural or environmental management or policy and decision-making model. In Africa, detailed soil information has been fragmented and limited to specific zones of interest for decades. To help bridge the soil information gap in Africa, the Africa Soil Information Service (AfSIS) project was established in 2008. AfSIS builds on recent advances in digital soil mapping, infrared spectroscopy, remote sensing, (geo)statistics, and integrated soil fertility management to improve the way soils are evaluated, mapped, and monitored. Over the period 2008-2014, the AfSIS project has compiled two soil profile data sets (about 28,000 unique locations): the Africa Soil Profiles (legacy) database and the AfSIS Sentinel Site (new soil samples) database -- the two data sets represent the most comprehensive soil sample database of the African continent to date. In addition a large set of high-resolution environmental data layers (covariates) was assembled. The point data were used in the AfSIS project to generate a set of maps of key soil properties for the African continent at 250 m spatial resolution: sand, silt and clay fractions, bulk density, organic carbon, total nitrogen, pH, cation-exchange capacity, exchangeable bases (Ca, K, Mg, Na), exchangeable acidity, and Al content. These properties were mapped for six depth intervals up to 2 m: 0-5 cm, 5-15 cm, 15-30 cm, 30-60 cm, 60-100 cm, and 100-200 cm. Random forests modelling was used to

  16. The Influence of Pet Fibres Surface Enzymatic Modification on the Selected Properties

    Directory of Open Access Journals (Sweden)

    Kardas Iwona

    2014-09-01

    Full Text Available The effect of changes in the surface structure of glossy polyester filaments from poly(ethylene terephthalate in terms of its micro-topography, molecular and supermolecular structure of the fibre surface layers on selected fibre surface and volumetric properties has been assessed. The performed tests and measurements have shown that the change in the general surface characteristics of PET fibres (micro-topography and hydrophilicity results in very beneficial changes in both their volumetric (dyeability and surface properties (wettability, pilling, oil-soil removal and electric properties.

  17. Impact of Residential Prairie Gardens on the Physical Properties of Urban Soil in Madison, Wisconsin.

    Science.gov (United States)

    Johnston, Marie R; Balster, Nick J; Zhu, Jun

    2016-01-01

    Prairie gardens have become a common addition to residential communities in the midwestern United States because prairie vegetation is native to the region, requires fewer resources to maintain than turfgrass, and has been promoted to help remediate urban soil. Although prairie systems typically have deeper and more diverse root systems than traditional turfgrass, no one has tested the effect of this vegetation type on the physical properties of urban soil. We hypothesized that residential prairie gardens would yield lower soil bulk density (BD), lower penetration resistance (PR), greater soil organic matter (SOM), and greater saturated hydraulic conductivity () compared with turfgrass lawns. To test this hypothesis, we examined 12 residential properties in Madison, WI, where homeowners had established a prairie garden within their turfgrass lawn. Despite a consistent trend in the difference between vegetation types, no significant main effects were found (i.e., a difference between vegetation types when averaged over depth) for any of the four soil properties measured in this study. Differences were found with depth and depended on a significant interaction with vegetation type. At the surface depth (0-0.15 m), soil beneath prairie gardens had 10% lower mean BD, 15% lower mean PR, 25% greater level of SOM, and 33% greater compared with soil beneath the adjacent lawns. These differences were not detected at deeper sampling intervals of 0.15 to 0.30 m and 0.30 to 0.45 m. Although not statistically significant, the consistent trend and direction among soil variables suggest that residential prairie gardens had changed the surface soil at a rate that marginally outpaced turfgrass and calls for controlled experiments to identify the mechanisms that might enhance these trends.

  18. Soil Tillage Conservation and its Effect on Soil Properties Bioremediation and Sustained Production of Crops

    Science.gov (United States)

    Rusu, Teodor; Ioana Moraru, Paula; Muresan, Liliana; Andriuca, Valentina; Cojocaru, Olesea

    2017-04-01

    Soil Tillage Conservation (STC) is considered major components of agricultural technology for soil conservation strategies and part of Sustainable Agriculture (SA). Human action upon soil by tillage determines important morphological, physical-chemical and biological changes, with different intensities and evaluative directions. Nowadays, internationally is unanimous accepted the fact that global climatic changes are the results of human intervention in the bio-geo-chemical water and material cycle, and the sequestration of carbon in soil is considered an important intervention to limit these changes. STC involves reducing the number of tillage's (minimum tillage) to direct sowing (no-tillage) and plant debris remains at the soil surface in the ratio of at least 30%. Plant debris left on the soil surface or superficial incorporated contributes to increased biological activity and is an important source of carbon sequestration. STC restore soil structure and improve overall soil drainage, allowing more rapid infiltration of water into soil. The result is a soil bioremediation, more productive, better protected against wind and water erosion and requires less fuel for preparing the germinative bed. Carbon sequestration in soil is net advantageous, improving the productivity and sustainability. We present the influence of conventional plough tillage system on soil, water and organic matter conservation in comparison with an alternative minimum tillage (paraplow, chisel plow and rotary harrow) and no-tillage system. The application of STC increased the organic matter content 0.8 to 22.1% and water stabile aggregate content from 1.3 to 13.6%, in the 0-30 cm depth, as compared to the conventional system. For the organic matter content and the wet aggregate stability, the statistical analysis of the data showed, increasing positive significance of STC. While the soil fertility and the wet aggregate stability were initially low, the effect of conservation practices on the

  19. Surface Properties from Transconductance in Nanoscale Systems.

    Science.gov (United States)

    Lynall, David; Byrne, Kristopher; Shik, Alexander; Nair, Selvakumar V; Ruda, Harry E

    2016-10-12

    Because of the continued scaling of transistor dimensions and incorporation of nanostructured materials into modern electronic and optoelectronic devices, surfaces and interfaces have become a dominant factor dictating material properties and device performance. In this study, we investigate the temperature-dependent electronic transport properties of InAs nanowire field-effect transistors. A point where the nanowire conductance becomes independent of temperature is observed, known as the zero-temperature-coefficient. The distribution of surface states is determined by a spectral analysis of the conductance activation energy and used to develop a carrier transport model that explains the existence and gate voltage dependence of this point. We determine that the position of this point in gate voltage is directly related to the fixed oxide charge on the nanowire surface and demonstrate the utility of this method for studying surface passivations in nanoscale systems by characterizing (NH4)2Sx and H2 plasma surface treatments on InAs nanowires.

  20. Prediction of soil properties for agricultural and environmental applications from infrared and X-ray soil spectral properties

    Energy Technology Data Exchange (ETDEWEB)

    Towett, Erick Kibet

    2013-12-09

    Many of today's most pressing problems facing developing countries, such as food security, climate change, and environmental protection, require large area data on soil functional capacity. Conventional assessments (methods and measurements) of soil capacity to perform specific agricultural and environmental functions are time consuming and expensive. In addition, repeatability, reproducibility and accuracy of conventional soil analytical data are major challenges. New, rapid methods to quantify soil properties are needed, especially in developing countries where reliable data on soil properties is sparse, and to take advantage of new opportunities for digital soil mapping. Mid infrared diffuse reflectance spectroscopy (MIR) has already shown promise as a rapid analytical tool and there are new opportunities to include other high-throughput techniques, such as total X-ray fluorescence (TXRF), and X-ray diffraction (XRD) spectroscopy. In this study TXRF and XRD were tested in conjunction with IR to provide powerful diagnostic capabilities for the direct prediction of key soil properties for agricultural and environmental applications especially for Sub-Saharan Africa (SSA) soils. Optimal combinations of spectral methods for use in pedotransfer functions for low cost, rapid prediction of chemical and physical properties of African soils as well as prediction models for soil organic carbon and soil fertility properties (soil extractable nutrients, pH and exchangeable acidity) were tested in this study. This study has developed and tested a method for the use of TXRF for direct quantification of total element concentrations in soils using a TXRF (S2 PICOFOX trademark) spectrometer and demonstrated that TXRF could be used as a rapid screening tool for total element concentrations in soils assuming sufficient calibration measures are followed. The results of the current study have shown that TXRF can provide efficient chemical fingerprinting which could be further

  1. Influence of Robinia pseudoacacia short rotation coppice on soil physical properties

    Science.gov (United States)

    Xavier, Morvan; Isabelle, Bertrand; Gwenaelle, Gibaud

    2015-04-01

    Human activities can lead to the degradation of soil physical properties. For instance, machinery traffic across the land can induce the development of compacted areas at the wheel tracks. It leads to a decrease in porosity which results in a decrease of the hydraulic conductivity, and therefore, prevents water infiltration and promotes surface runoff. Land use, soil management and soil cover also have a significant influence on soil physical properties (Kodesova et al., 2011). In the arable land, surface runoff and soil erosion are enhanced by the absence of soil cover for part of the year and by the decrease of aggregate stability due to a decline of soil organic matter. In that context, few studies focused on the effects of a Robinia pseudoacacia short rotation coppice (SRC) on soil physical properties. Therefore, this study aims to determine the effect of the conversion of a grassland in a SRC on soil physical properties. These properties have also been compared to those of arable land and natural forest. For that, in several plots of the experimental farm of Grignon (30 km west of Paris, France), different measurements were performed: i) soil water retention on a pressure plate apparatus for 7 water potential between 0 and 1500 kPa, ii) bulk density using the method for gravelly and rocky soil recommended by the USDA, iii) aggregate stability using the method described in Le Bissonnais (1996), and iv) soil hydraulic conductivity using a Guelph permeameter. All these measurements were performed on the same soil type and on different land uses: arable land (AL), grassland (GL), natural forest (NF) and short rotation coppice (SRC) of Robinia pseudoacacia planted 5 years ago. Soil water retention measurements are still under progress and will be presented in congress. Bulk density measurements of the AL, GL and SRC are not significantly different. They ranged from 1.32 to 1.42. Only the NF measurements are significantly lower than the other (0.97). Aggregate

  2. Soil fertility in deserts: a review on the influence of biological soil crusts and the effect of soil surface disturbance on nutrient inputs and losses

    Science.gov (United States)

    Reynolds, R.; Phillips, S.; Duniway, M.; Belnap, J.

    2003-01-01

    Sources of desert soil fertility include parent material weathering, aeolian deposition, and on-site C and N biotic fixation. While parent materials provide many soil nutrients, aeolian deposition can provide up to 75% of plant-essential nutrients including N, P, K, Mg, Na, Mn, Cu, and Fe. Soil surface biota are often sticky, and help retain wind-deposited nutrients, as well as providing much of the N inputs. Carbon inputs are from both plants and soil surface biota. Most desert soils are protected by cyanobacterial-lichen-moss soil crusts, chemical crusts and/or desert pavement. Experimental disturbances applied in US deserts show disruption of soil surfaces result in decreased N and C inputs from soil biota by up to 100%. The ability to glue aeolian deposits in place is compromised, and underlying soils are exposed to erosion. The ability to withstand wind increases with biological and physical soil crust development. While most undisturbed sites show little sediment production, disturbance by vehicles or livestock produce up to 36 times more sediment production, with soil movement initiated at wind velocities well below commonly-occurring wind speeds. Soil fines and flora are often concentrated in the top 3 mm of the soil surface. Winds across disturbed areas can quickly remove this material from the soil surface, thereby potentially removing much of current and future soil fertility. Thus, disturbances of desert soil surfaces can both reduce fertility inputs and accelerate fertility losses.

  3. Denitrification 'hot spots' in soil following surface residue application

    Science.gov (United States)

    Kuntz, Marianne; Morley, Nicholas J.; Hallett, Paul D.; Watson, Christine; Baggs, Elizabeth M.

    2015-04-01

    The availability of organic C is an important driver for the production and reduction of the greenhouse gas nitrous oxide (N2O) during denitrification. Denitrification as a response to plant residue amendments to soil surfaces has been extensively researched. However, the nature of hotspot sites of N2O production and reduction within the soil profile, especially in relation to the location of applied residues, is unknown. In a laboratory experiment we investigated the relationship between denitrifier N2O surface fluxes and N2O production and reduction sites. Probes which equilibrate with the soil gas phase by diffusion were developed to quantify denitrification products and product ratios at 1-2 cm, 4.5-5.5 cm or 8-9 cm from the surface. 13C labelled barley straw was incorporated at rates of 0, 2 and 4 t ha-1 into the top 3 cm of soil and subsequently amended with 14NH415NO3. In a three week experiment the soil gas phase at the three depths was analysed for 15N-N2O, 15N-N2, 13C-CO2 and O2 concentrations. Additionally, cores were destructively sampled for mineral 15N as well as microbial C and dissolved C in the respective depths. 15N-N2O and CO2 surface fluxes peaked one day after N application, with residue application resulting in significantly higher 15N-N2O emission rates compared to the non-amended control. The timing of the 15N-N2O surface flux on day 1 was related to maximum 15N-N2O concentrations of 36.6 μg 15N L-1 within the pore space at 5 cm depth. Three days after fertilizer application 15N-N2O pore space concentrations had significantly increased to 193 μg 15N L-1 at 9 cm depth indicating denitrifier activity at greater depth. Denitrification below the soil surface could be explained by increased microbial activity, oxygen depletion with increasing depth and progressive downwards diffusion of fertilizer NO3-. However, C availability appeared to only affect denitrification in the surface layer in which the residue was incorporated. Our results provide

  4. Effect of nanoclay particles on some physical and mechanical properties of soils

    Directory of Open Access Journals (Sweden)

    H Sharifnasab

    2016-04-01

    Full Text Available Introduction: As a mechanical tillage practices on soil preparation improve soil structure, increase in porosity, better distribution of soil aggregates and eventually modify the physical properties of soil. The use of nano-technology in agricultural science and its application in tillage for improving the physical properties and mechanical issues has grown substantially. Nanotechnology is an appropriate way to reduce soil limitations. However the nanoparticles are very small amounts in soil, due to features such as high surface area, surface charge (appearance and sometimes porous nano-engineering of physical-chemical properties of soil are affected significantly (Mohammadi & Niazian, 2013. To use of nanomaterials in the territory of a new issue (Taipodia et al., 2011. Small developments on the use of nanoparticles to improve soil quality and land reform have been taken (Theron et al., 2008. Clay soil was used to enhance the compressive strength (Yonekura & Miwa, 1993. Nanosilica particle effects were examined for increasing resistance against penetration and consolidation (Noll et al., 1992. In 2005, these particles were used to increase adhesion and reduce viscosity. It seemed that the adhesion of the particles was depended on Nanosilica (Mohammadi & Niazian, 2013. The use of nanomaterials showed that the increased pH and soil fertility, improved soil physical structure, and reduced mobility, availability and toxicity of heavy metals and other environmental factors and those that will stabilize the soil components and subsides the erosion in the mining pick, (Lal, 2008. In agriculture, the soil conditioner studies have shown that nanoparticles can mine the soil quality by increasing water-holding capacity, increasing silt and clay and improve levels of nutrients, and eliminate toxins, (Liu and Lal, 2012.In this study, the effect on some physical and mechanical properties of soil contain clay gradation, Atterberg limits, specifications

  5. Near surface soil vapor clusters for monitoring emissions of volatile organic compounds from soils.

    Science.gov (United States)

    Ergas, S J; Hinlein, E S; Reyes, P O; Ostendorf, D W; Tehrany, J P

    2000-01-01

    The overall objective of this research was to develop and test a method of determining emission rates of volatile organic compounds (VOCs) and other gases from soil surfaces. Soil vapor clusters (SVCs) were designed as a low dead volume, robust sampling system to obtain vertically resolved profiles of soil gas contaminant concentrations in the near surface zone. The concentration profiles, when combined with a mathematical model of porous media mass transport, were used to calculate the contaminant flux from the soil surface. Initial experiments were conducted using a mesoscale soil remediation system under a range of experimental conditions. Helium was used as a tracer and trichloroethene was used as a model VOC. Flux estimations using the SVCs were within 25% of independent surface flux estimates and were comparable to measurements made using a surface isolation flux chamber (SIFC). In addition, method detection limits for the SVC were an order of magnitude lower than detection limits with the SIFC. Field trials, conducted with the SVCs at a bioventing site, indicated that the SVC method could be easily used in the field to estimate fugitive VOC emission rates. Major advantages of the SVC method were its low detection limits, lack of required auxiliary equipment, and ability to obtain real-time estimates of fugitive VOC emission rates.

  6. Elevated soil CO2 efflux at the boundaries between impervious surfaces and urban greenspaces

    Science.gov (United States)

    Wu, XiaoGang; Hu, Dan; Ma, ShengLi; Zhang, Xia; Guo, Zhen; Gaston, Kevin J.

    2016-09-01

    Impervious surfaces and greenspaces have significant impacts on ecological processes and ecosystem services in urban areas. However, there have been no systematic studies of how the interaction between the two forms of land cover, and especially their edge effects, influence ecosystem properties. This has made it difficult to evaluate the effectiveness of urban greenspace design in meeting environmental goals. In this study, we investigated edge effects on soil carbon dioxide (CO2) fluxes in Beijing and found that soil CO2 flux rates were averagely 73% higher 10 cm inwards from the edge of greenspaces. Distance, soil temperature, moisture, and their interaction significantly influenced soil CO2 flux rates. The magnitude and distance of edge effects differed among impervious structure types. Current greening policy and design should be adjusted to avoid the carbon sequestration service of greenspaces being limited by their fragmentation.

  7. Effect of Afforestation on Soil Properties and Mycorrhizal Formation

    Institute of Scientific and Technical Information of China (English)

    P. KAHLE; C. BAUM; B. BOELCKE

    2005-01-01

    A study was conducted on Cambisols in Northern Germany to analyze the effect of fast growing trees (Salix and Populus spp.) used in agroforestry on soil chemical and physical properties and also on endo- and ectomycorrhizal colonization measure the topsoil inventories at the very beginning and after six (GUL), seven (VIP) and ten (ROS) years of afforestation with fast growing trees. The effect on soil organic carbon, plant available nutrients, reaction, bulk density, porosity and water conditions was analyzed. Arable soils without tree coppice were used as controls. Additionally, the endoand ectomycorrhizal colonization of two Salix and two Populus clones were investigated at one site (GUL) in 2002. The amounts of organic carbon in the topsoil increased significantly (P<0.01) presumably induced by leaf and root litter and also by the lack of tillage. The soil bulk density significantly decreased and the porosity of the soil increased significantly (both P<0.01). The proportion of medium pores in the soil also rose significantly (P<0.05 and 0.01). Generally,afforestation of arable soils improved soil water retention. Ectomycorrhizas dominated the mycorrhizal formation of the Salix and Populus clones, with the accumulation of organic matter in the topsoil suspected of supporting the ectomycorrhizal formation. Thus, agroforestry with Salix and Populus spp. conspicuously affected chemical and additionally physical properties of the top layer of Cambisols within a period of six years.

  8. Compost amendment of sandy soil affects soil properties and greenhouse tomato productivity

    DEFF Research Database (Denmark)

    Arthur, Emmanuel; Cornelis, W.; Razzaghi, Fatemeh

    2012-01-01

    Sandy soils, with low productivity, could be improved by compost application to sustain crop production. This study aimed to examine the effect of three compost types (vegetable, fruit and yard waste compost, garden waste compost, and spent mushroom compost) on basic properties of a loamy sand...... and greenhouse tomato productivity. Disturbed and intact soil samples were taken from a decade-long compost field experiment on loamy sand with three compost types at application rate of 30 m3 ha-1 yr-1 (7.5 ton ha-1 yr-1). The soils were characterized for chemical and physical properties. Tomato was planted...... in a greenhouse using soil samples from the field and vegetative and yield parameters (plant height, stem diameter, leaf number, and fruit yield), water productivity, and harvest index were evaluated. All compost types significantly increased soil total carbon, total nitrogen, pH, electrical conductivity...

  9. Electrodialytic Remediation of Pb Contaminated Soil - Effects of Soil Properties and Pb Distribution

    DEFF Research Database (Denmark)

    Pedersen, Anne Juul; Jensen, Pernille Erland

    1999-01-01

    The aim of this work was to investigate the effects of soil properties and Pb distribution on the electrodialytic remediation of Pb contaminated soil. Two naturally Pb contaminated soils were compared with respect to total Pb content, Pb distribution, pH, carbonate content, clay content and organic...... matter, and an electrodialytic remediation experiment was made on each soil.It was concluded that soil pH was the most important factor limiting the mobilisation of Pb. In one of the remediation experiments it was possible to mobilise and reduce the amount of Pb significantly, whereas in the other only...... a small amount of the initial Pb was mobilised at similar experimental conditions. A high buffering capacity of one of the soils, which was partly due to a high carbonate content, led to a bad remediation result....

  10. Enhancement of chromate reduction in soils by surface modified biochar.

    Science.gov (United States)

    Mandal, Sanchita; Sarkar, Binoy; Bolan, Nanthi; Ok, Yong Sik; Naidu, Ravi

    2017-01-15

    Chromium (Cr) is one of the common metals present in the soils and may have an extremely deleterious environmental impact depending on its redox state. Among two common forms, trivalent Cr(III) is less toxic than hexavalent Cr(VI) in soils. Carbon (C) based materials including biochar could be used to alleviate Cr toxicity through converting Cr(VI) to Cr(III). Incubation experiments were conducted to examine Cr(VI) reduction in different soils (Soil 1: pH 7.5 and Soil 2: pH 5.5) with three manures from poultry (PM), cow (CM) and sheep (SM), three respective manure-derived biochars (PM biochar (PM-BC), CM biochar (CM-BC) and SM biochar (SM-BC)) and two modified biochars (modified PM-BC (PM-BC-M) and modified SM-BC (SM-BC-M)). Modified biochar was synthesized by incorporating chitosan and zerovalent iron (ZVI) during pyrolysis. Among biochars, highest Cr(VI) reduction was observed with PM-BC application (5%; w/w) (up to 88.12 mg kg(-1); 45% reduction) in Soil 2 (pH 5.5). The modified biochars enhanced Cr(VI) reduction by 55% (SM-BC-M) compared to manure (29%, SM) and manure-derived biochars (40% reduction, SM-BC). Among the modified biochars, SM-BC-M showed a higher Cr(VI) reduction rate (55%) than PM-BC-M (48%) in Soil 2. Various oxygen-containing surface functional groups such as phenolic, carboxyl, carbonyl, etc. on biochar surface might act as a proton donor for Cr(VI) reduction and subsequent Cr(III) adsorption. This study underpins the immense potential of modified biochar in remediation of Cr(VI) contaminated soils. Copyright © 2016 Elsevier Ltd. All rights reserved.

  11. Soil surface sealing reverse or promote desertification?

    Science.gov (United States)

    Assouline, Shmuel; Thompson, Sally; Chen, Li; Svoray, Tal; Sela, Shai; Katul, Gabriel

    2016-04-01

    Vegetation cover in dry regions is a key variable determining desertification. Bare soils exposed to rainfall by desertification can form physical crusts that reduce infiltration, exacerbating water stress on the remaining vegetation. Paradoxically, field studies show that crust removal is associated with plant mortality in desert systems, while artificial biological crusts can improve plant regeneration. Here, it is shown how physical crusts can act as either drivers of, or buffers against desertification depending on their environmental context. The behavior of crusts is first explored using a simplified theory for water movement on a uniform, partly vegetated slope subject to stationary hydrologic conditions. Numerical model runs supplemented with field data from a semiarid Long-Term Ecological Research (LTER) site are then applied to represent more realistic environmental conditions. When vegetation cover is significant, crusts can drive desertification, but this process is potentially self-limiting. For low vegetation cover, crusts mitigate against desertification by providing water subsidy to plant communities through a runoff-runon mechanism.

  12. Mechanical and Hydraulic Properties of Wax-coated Sands for Sport Surfaces

    Science.gov (United States)

    Bardet, J. P.; Benazza, C.; Bruchon, J. F.; Mishra, M.

    2009-06-01

    Natural soils such as sandy loams are being replaced by synthetic soils for various types of sport and recreational surfaces, including horseracing tracks. These synthetic soils are made of a mixture of sand, microcrystalline wax, synthetic fibers and rubber chips which optimize the mechanical and hydraulic properties of natural soils so that they drain faster after rainstorms and decrease risks of sport injuries while retaining appropriate sport performances. Silica sand, which makes up the largest fraction of synthetic soils, is hydrophyllic by nature, i.e., tends to retain water on sand grain surfaces. After rainstorms, hydrophilic surfaces retain a large amount of water, are difficult to compact, and yield uncontrollable mechanical and hydraulic properties when too moist. The addition of wax contributes to improving both mechanical and hydraulic properties of sands. Wax coats the sand grains with a thin layer, and enhances adherence between sand particles. It repels water from sand grains and influences both compaction and hydraulic properties. This study reports experimental results that help to understand the properties of wax-coated sands used in synthetic surfaces, especially the degradation of synthetic surfaces that have insufficient wax-coatings.

  13. Surface properties of beached plastic pellets.

    Science.gov (United States)

    Fotopoulou, Kalliopi N; Karapanagioti, Hrissi K

    2012-10-01

    The presence of pollutants on plastic debris is an emerging environmental hot topic. Understanding the surface alteration of plastics while in the marine environment increases our understanding of the pollutant-plastic debris interaction. Plastic pellets are widely distributed throughout the world oceans. Eroded and virgin polyethylene (PE) and polypropylene (PP) pellets were studied for their surface properties to better understand the interaction between plastic and compounds in marine environment. Surface properties such as point of zero charge, surface area and pore volume, surface topography, functional groups and acid-base behavior are important factors which affect sorption. Virgin plastic pellets had homogeneous smooth surfaces that do not have any acid-base behavior. Eroded PE demonstrates an altered surface that at seawater pH acquires a negative charge due to ketone groups. The uneven surface and possible functional groups could have been formed from the erosion processes while floating at the sea surface and might explain the interaction of eroded plastics with microbes and metals. Copyright © 2012 Elsevier Ltd. All rights reserved.

  14. Filter properties of seam material from paved urban soils

    Directory of Open Access Journals (Sweden)

    T. Nehls

    2008-04-01

    Full Text Available Depositions of all kinds of urban dirt and dust including anthropogenic organic substances like soot change the filter properties of the seam filling material of pervious pavements and lead to the formation of a new soil substrate called seam material.

    In this study, the impact of the particular urban form of organic matter (OM on the seam materials CECpot, the specific surface area (As, the surface charge density (SCD, the adsorption energies (Ea and the adsorption of Cd and Pb were assessed. The Cd and Pb displacement through the pavement system has been simulated in order to assess the risk of soil and groundwater contamination from infiltration of rainwater in paved urban soils.

    As, Ea and SCD derived from water vapor adsorption isotherms, CECpot, Pb and Cd adsorption isotherms where analyzed from adsorption experiments. The seam material is characterized by a darker munsell-color and a higher Corg (12 to 48g kg-1 compared to the original seam filling. Although, the increased Corg leads to higher As (16m2g-1 and higher CECpot (0.7 to 4.8cmolckg-1, with 78cmolckg-1C its specific CECpot is low compared to OM of non-urban soils. This can be explained by a low SCD of 1.2×10-6molc m-2 and a low fraction of high adsorption energy sites which is likely caused by the non-polar character of the accumulated urban OM in the seam material.

    The seam material shows stronger sorption of Pb and Cd compared to the original construction sand. The retardation capacity of seam material for Pb is similar, for Cd it is much smaller compared to natural sandy soils with similar Corg concentrations

  15. Surface Complexation Modeling in Variable Charge Soils: Charge Characterization by Potentiometric Titration

    Directory of Open Access Journals (Sweden)

    Giuliano Marchi

    2015-10-01

    Full Text Available ABSTRACT Intrinsic equilibrium constants of 17 representative Brazilian Oxisols were estimated from potentiometric titration measuring the adsorption of H+ and OH− on amphoteric surfaces in suspensions of varying ionic strength. Equilibrium constants were fitted to two surface complexation models: diffuse layer and constant capacitance. The former was fitted by calculating total site concentration from curve fitting estimates and pH-extrapolation of the intrinsic equilibrium constants to the PZNPC (hand calculation, considering one and two reactive sites, and by the FITEQL software. The latter was fitted only by FITEQL, with one reactive site. Soil chemical and physical properties were correlated to the intrinsic equilibrium constants. Both surface complexation models satisfactorily fit our experimental data, but for results at low ionic strength, optimization did not converge in FITEQL. Data were incorporated in Visual MINTEQ and they provide a modeling system that can predict protonation-dissociation reactions in the soil surface under changing environmental conditions.

  16. Soil properties database of Spanish Soils; Base de datos de propiedades edafologicas de los suelos espanoles

    Energy Technology Data Exchange (ETDEWEB)

    Trueba, C.; Millan, R.; Schmid, T.; Lago, C. [Ciemat. Madrid (Spain)

    2000-07-01

    The Soil Properties Database contains information on 2.176 soil profiles, distributed on a provincial level. its creation was a task of the Project Radiological Vulnerability of Spanish Soils due to the need to characterize the different soil types found on the Spanish Peninsula. This Project, developed by the Environmental Department of CIEMAT, has been part-funded by the Consejo de Seguridad Nuclear and ENRESA. The information collated was started by Prof. Carlos Roquero, of the Universidad Politecnica de Madrid, in terms of a bibliographical compilation of soil profiles. The reference of their distribution is the Soil Map of the European Communities at scale 1: 1.000.000 (1985). The legend of this map is based on the legend developed for the FAO/UNESCO Soil Map of the World at scale 1 : 5.000.000, with a further subdivision od soil units in order to reflect the larger scale. However, to classify the soil profiles of the database, the latter legend has been used as well as the USDA Soil Taxonomy of 1975. (Author)

  17. Dispersion controlled by permeable surfaces: surface properties and scaling

    Energy Technology Data Exchange (ETDEWEB)

    Ling, Bowen; Tartakovsky, Alexandre M.; Battiato, Ilenia

    2016-07-19

    Permeable and porous surfaces are common in natural and engineered systems. Flow and transport above such surfaces are significantly affected by the surface properties, e.g. matrix porosity and permeability. However, the relationship between such properties and macroscopic solute transport is largely unknown. In this work, we focus on mass transport in a two-dimensional channel with permeable porous walls under fully developed laminar flow conditions. By means of perturbation theory and asymptotic analysis, we derive the set of upscaled equations describing mass transport in the coupled channel–porous-matrix system and an analytical expression relating the dispersion coefficient with the properties of the surface, namely porosity and permeability. Our analysis shows that their impact on the dispersion coefficient strongly depends on the magnitude of the Péclet number, i.e. on the interplay between diffusive and advective mass transport. Additionally, we demonstrate different scaling behaviours of the dispersion coefficient for thin or thick porous matrices. Our analysis shows the possibility of controlling the dispersion coefficient, i.e. transverse mixing, by either active (i.e. changing the operating conditions) or passive mechanisms (i.e. controlling matrix effective properties) for a given Péclet number. By elucidating the impact of matrix porosity and permeability on solute transport, our upscaled model lays the foundation for the improved understanding, control and design of microporous coatings with targeted macroscopic transport features.

  18. Vanadium Trineodecanoate Promoter for Fiberglass-Polyester Soil Surfacings.

    Science.gov (United States)

    1980-06-01

    surfaces for soils consists of a polyester resin, cumene hydroperoxide catalyst and a promoter solution containing a vanadium salt and N,N-dimethyl-p-tolui...4 Synthesis of Vanadium Trineodecanoate .. .... ......... 4 Reactions Using Various Reagents. ..... ........... 4 Analysis of Vanadium...polymer system consists of a polyester resin, a peroxide cata- lyst ( cumene hydroperoxide) and a two-part, premixed, promoter solution. The promoter

  19. [Biological properties of lateritic red soil and their relationships with soil fertility in Southern China under different land use types].

    Science.gov (United States)

    Zhang, Jing; Gao, Yun-Hua; Zhang, Chi; Zhou, Bo; Li, Jing-Juan; Yang, Xiao-Xue; Xu, Huan; Dai, Jun

    2013-12-01

    Taking the lateritic red soil on a typical slopeland in Southern China as test object, this paper studied the soil microbial properties, enzyme activities, and their relationships with soil fertility under four land use types (newly cultivated dryland, shrub land, Eucalyptus land, and orchard). There existed significant differences in the soil biological properties under different land use types, among which, orchard soil had the highest microbial quantity and enzyme activities, newly cultivated dryland soil had the fastest soil respiration rate, the fewest soil microorganism quantity, and the lowest enzyme activities, whereas shrub land and woodland soils had the biological properties ranged between newly cultivated dryland and orchard soils, and there was a high similarity in the biological properties between shrub land and woodland soils. Under different land use types, the soil microbial quantity and enzyme activities were positively correlated with soil organic carbon and most of the soil nutrients. It was suggested the soils with high soil organic matter content and high fertility level were beneficial to the soil microbial growth and enzyme activities.

  20. Effect of corylus clusters on the physicochemical properties of soil

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Soil sample plots were specified and the soil in layer A0, A1 and AB were collected in MaoershanForest Experiment Farm of Northeast Forestry University for study of the effect of corylus clusters on soil in 1999. The result shows that the pH value, contents of organic matter, total nitrogen, alkali-discomposed nitrogen and total phosphorus under the corylus clusters are higher than that under the non-corylus clusters, except the available phosphorus content. The number of soil granular aggregates or the water stable aggregates under corylus clusters is more than that under the non-corylus clusters. The corylus clusters play an important role in improving the physicochemical properties of the soil, which should be conserved and developed in the forestry production.

  1. Micronutrient Availability in Relation to Selected Soil Properties and landscape Position in Calcareous Soils of Golpayegan

    Directory of Open Access Journals (Sweden)

    Mojtaba Fathi

    2017-02-01

    Full Text Available Introduction: Variety of soil reactions govern the distribution of metal micronutrients that includes complexation with organic and inorganic ligands, ion exchange, adsorption and desorption processes, precipitation and dissolution of solids and acid-based equilibria. The relative importance of these reactions depends on many factors such as soil physical, chemical, and mineralogical properties and the nature of metal ions. Environmental factors such as climate, physiographic position, and soil development may affect variability of some soil properties and thereby nutrient availability. The present research was conducted to find relationships between Iron, manganese, zinc, and copper availability and some major soil properties, physiographic condition and soil development. Materials and Methods: Golpayegan region is located in northwest of Isfahan province in central Iran. The mean elevation of the studied area is 1790 above sea level. Annual precipitation was about 244mm and mean monthly temperature ranges from -6 in January to 34°C in August. The soils were developed on different physiographic conditions including piedmont plains, alluvial-fan, plateaus, and flood plains belonging to Entisols and Aridisols. Soil samples (0–60 cm were collected from 98 grid points with 2000m distance in the agricultural area of Golpayegan. Particle size distribution, calcium carbonate, organic carbon, available potassium and phosphorus of the soils were measured by SWRI standard methods. Available Zn, Cu, Mn, and Fe were determined by addition of 10 g soil to 20mL 0.005M diethylentriaminepentacetic‏. The solutions were shaken for 2 h at 25°C, centrifuged, filtered, and Fe, Mn, Zn, and Cu concentrations were measured by an atomic absorption spectrophotometer. Results Discussion: Studied soils were developed on calcareous material and about 60% of samples have more than 20% of calcium carbonate. Available Fe ranged from 1.4 to 6.5 mg kg-1 (mean 15.8 mg kg-1

  2. Effect of herbicides on microbiological properties of soil

    Directory of Open Access Journals (Sweden)

    Milošević Nada A.

    2002-01-01

    Full Text Available Microorganisms decompose herbicides and they may serve as bioindicators of soil changes following herbicide application. Certain microbial species may be used as bioherbicides. This study has shown that Azotobacter is most sensitive to herbicide application; it is, therefore, a reliable indicator of the biological value of soil. The numbers of this group of nitrogen-fixing bacteria decrease considerably in the period of 7-14 days after herbicide application. Simultaneously, the numbers of Actinomycetes and less so of fungi increase, indicating that these microorganisms use herbicides as sources of biogenous elements. Rate of herbicidal decomposition depends on the properties of the preparation applied herbicide dose as well as on the physical and chemical soil properties, soil moisture and temperature, ground cover, agrotechnical measures applied and the resident microbial population.

  3. Space Weathering Effects in Lunar Soils: The Roles of Surface Exposure Time and Bulk Chemical Composition

    Science.gov (United States)

    Zhang, Shouliang; Keller, Lindsay P.

    2011-01-01

    Space weathering effects on lunar soil grains result from both radiation-damaged and deposited layers on grain surfaces. Typically, solar wind irradiation forms an amorphous layer on regolith silicate grains, and induces the formation of surficial metallic Fe in Fe-bearing minerals [1,2]. Impacts into the lunar regolith generate high temperature melts and vapor. The vapor component is largely deposited on the surfaces of lunar soil grains [3] as is a fraction of the melt [4, this work]. Both the vapor-deposits and the deposited melt typically contain nanophase Fe metal particles (npFe0) as abundant inclusions. The development of these rims and the abundance of the npFe0 in lunar regolith, and thus the optical properties, vary with the soil mineralogy and the length of time the soil grains have been exposed to space weathering effects [5]. In this study, we used the density of solar flare particle tracks in soil grains to estimate exposure times for individual grains and then perform nanometer-scale characterization of the rims using transmission electron microscopy (TEM). The work involved study of lunar soil samples with different mineralogy (mare vs. highland) and different exposure times (mature vs. immature).

  4. The impact of ants on mineral soil properties and processes at different spatial scales

    NARCIS (Netherlands)

    Cammeraat, E.L.H.; Risch, A.C.

    2008-01-01

    Soil dwelling ants are important soil engineers that have a large impact on the soil ecosystem. This is reflected in the alteration of soil properties by ants due to burrowing activities, the accumulation of organic matter and other nutrients in the soil, which, in turn, alters soil physical,

  5. The impact of ants on mineral soil properties and processes at different spatial scales

    NARCIS (Netherlands)

    Cammeraat, E.L.H.; Risch, A.C.

    2008-01-01

    Soil dwelling ants are important soil engineers that have a large impact on the soil ecosystem. This is reflected in the alteration of soil properties by ants due to burrowing activities, the accumulation of organic matter and other nutrients in the soil, which, in turn, alters soil physical, chemic

  6. Global observation-based diagnosis of soil moisture control on land surface flux partition

    Science.gov (United States)

    Gallego-Elvira, Belen; Taylor, Christopher M.; Harris, Phil P.; Ghent, Darren; Veal, Karen L.; Folwell, Sonja S.

    2016-04-01

    Soil moisture plays a central role in the partition of available energy at the land surface between sensible and latent heat flux to the atmosphere. As soils dry out, evapotranspiration becomes water-limited ("stressed"), and both land surface temperature (LST) and sensible heat flux rise as a result. This change in surface behaviour during dry spells directly affects critical processes in both the land and the atmosphere. Soil water deficits are often a precursor in heat waves, and they control where feedbacks on precipitation become significant. State-of-the-art global climate model (GCM) simulations for the Coupled Model Intercomparison Project Phase 5 (CMIP5) disagree on where and how strongly the surface energy budget is limited by soil moisture. Evaluation of GCM simulations at global scale is still a major challenge owing to the scarcity and uncertainty of observational datasets of land surface fluxes and soil moisture at the appropriate scale. Earth observation offers the potential to test how well GCM land schemes simulate hydrological controls on surface fluxes. In particular, satellite observations of LST provide indirect information about the surface energy partition at 1km resolution globally. Here, we present a potentially powerful methodology to evaluate soil moisture stress on surface fluxes within GCMs. Our diagnostic, Relative Warming Rate (RWR), is a measure of how rapidly the land warms relative to the overlying atmosphere during dry spells lasting at least 10 days. Under clear skies, this is a proxy for the change in sensible heat flux as soil dries out. We derived RWR from MODIS Terra and Aqua LST observations, meteorological re-analyses and satellite rainfall datasets. Globally we found that on average, the land warmed up during dry spells for 97% of the observed surface between 60S and 60N. For 73% of the area, the land warmed faster than the atmosphere (positive RWR), indicating water stressed conditions and increases in sensible heat flux

  7. Soil properties, nutrient dynamics, and soil enzyme activities associated with garlic stalk decomposition under various conditions.

    Directory of Open Access Journals (Sweden)

    Xu Han

    Full Text Available The garlic stalk is a byproduct of garlic production and normally abandoned or burned, both of which cause environmental pollution. It is therefore appropriate to determine the conditions of efficient decomposition, and equally appropriate to determine the impact of this decomposition on soil properties. In this study, the soil properties, enzyme activities and nutrient dynamics associated with the decomposition of garlic stalk at different temperatures, concentrations and durations were investigated. Stalk decomposition significantly increased the values of soil pH and electrical conductivity. In addition, total nitrogen and organic carbon concentration were significantly increased by decomposing stalks at 40°C, with a 5:100 ratio and for 10 or 60 days. The highest activities of sucrase, urease and alkaline phosphatase in soil were detected when stalk decomposition was performed at the lowest temperature (10°C, highest concentration (5:100, and shortest duration (10 or 20 days. The evidence presented here suggests that garlic stalk decomposition improves the quality of soil by altering the value of soil pH and electrical conductivity and by changing nutrient dynamics and soil enzyme activity, compared to the soil decomposition without garlic stalks.

  8. Soil properties, nutrient dynamics, and soil enzyme activities associated with garlic stalk decomposition under various conditions.

    Science.gov (United States)

    Han, Xu; Cheng, Zhihui; Meng, Huanwen

    2012-01-01

    The garlic stalk is a byproduct of garlic production and normally abandoned or burned, both of which cause environmental pollution. It is therefore appropriate to determine the conditions of efficient decomposition, and equally appropriate to determine the impact of this decomposition on soil properties. In this study, the soil properties, enzyme activities and nutrient dynamics associated with the decomposition of garlic stalk at different temperatures, concentrations and durations were investigated. Stalk decomposition significantly increased the values of soil pH and electrical conductivity. In addition, total nitrogen and organic carbon concentration were significantly increased by decomposing stalks at 40°C, with a 5:100 ratio and for 10 or 60 days. The highest activities of sucrase, urease and alkaline phosphatase in soil were detected when stalk decomposition was performed at the lowest temperature (10°C), highest concentration (5:100), and shortest duration (10 or 20 days). The evidence presented here suggests that garlic stalk decomposition improves the quality of soil by altering the value of soil pH and electrical conductivity and by changing nutrient dynamics and soil enzyme activity, compared to the soil decomposition without garlic stalks.

  9. The Effect of Soil Properties on Metal Bioavailability: Field Scale Validation to Support Regulatory Acceptance

    Science.gov (United States)

    2014-06-01

    speciation of the metals in the soil with the use of X-ray absorption spectroscopy including synchrotron X-ray fluorescence microprobe mapping, microbeam X...its chemical speciation and IVBA solubility will depend on the mining waste mineral not soil property. The ability of soil properties (i.e...by soil properties was found for the Cherry Point soil . Differences in Cr chemical speciation in soil may offer an explanation. Water or wastewater

  10. Critical Zone Soil Properties effects on Soil Water Storage and Flux

    Science.gov (United States)

    Kormos, P. R.; McNamara, J. P.; Seyfried, M. S.; Marks, D. G.; Flores, A. N.; Marshall, H.; Williams, C. J.

    2012-12-01

    Soil properties control a wide range of hydrologic processes including recharge to regional aquifers. Soil water must pass through the critical zone to contribute to ground water recharge. Deep percolation (DP) from catchments is considered to be an estimate of mountain block recharge to regional aquifers. DP is also an important term in water mass balance studies, which attempt to estimate hydrologic states and fluxes in watersheds with fractured or transmissive bedrock. Few studies estimate the magnitude of this water balance term and it is often considered negligible. The objective of this study is to estimate the timing and magnitude of DP in the 0.015 km2 Tree Line experimental catchment (TL) from the 2011 water year. The catchment, which is located within the Dry Creek Experimental Watershed, Boise, ID, contains thin sandy soil over fractured granitic bedrock. We introduce modeling methods that focus on achieving a high degree of agreement between measured and modeled catchment storage. A distributed physically-based snow energy balance model is loosely coupled to a capacitance-based soil moisture model to estimate soil storage. Measured and calculated soil model parameters, including field capacity, saturated soil moisture content, and plant extraction limits, control the flux of water through the critical zone. Variability in soil storage and soil water fluxes through the critical zone is driven by soil properties. Parameters describing a leaf area index time series are calibrated to minimize the difference between measured and modeled soil dry down in the spring. DP is estimated to be 126 mm from Dec. 13, 2010 to June 30, 2011, which is 18% of the precipitation measured during that time. Rain-on-snow events are estimated to contribute 79 mm, which is 11% of precipitation or 63% of the calculated DP.

  11. Effects of fire on properties of forest soils: a review.

    Science.gov (United States)

    Certini, Giacomo

    2005-03-01

    Many physical, chemical, mineralogical, and biological soil properties can be affected by forest fires. The effects are chiefly a result of burn severity, which consists of peak temperatures and duration of the fire. Climate, vegetation, and topography of the burnt area control the resilience of the soil system; some fire-induced changes can even be permanent. Low to moderate severity fires, such as most of those prescribed in forest management, promote renovation of the dominant vegetation through elimination of undesired species and transient increase of pH and available nutrients. No irreversible ecosystem change occurs, but the enhancement of hydrophobicity can render the soil less able to soak up water and more prone to erosion. Severe fires, such as wildfires, generally have several negative effects on soil. They cause significant removal of organic matter, deterioration of both structure and porosity, considerable loss of nutrients through volatilisation, ash entrapment in smoke columns, leaching and erosion, and marked alteration of both quantity and specific composition of microbial and soil-dwelling invertebrate communities. However, despite common perceptions, if plants succeed in promptly recolonising the burnt area, the pre-fire level of most properties can be recovered and even enhanced. This work is a review of the up-to-date literature dealing with changes imposed by fires on properties of forest soils. Ecological implications of these changes are described.

  12. Use of LANDSAT images of vegetation cover to estimate effective hydraulic properties of soils

    Science.gov (United States)

    Eagleson, Peter S.; Jasinski, Michael F.

    1988-01-01

    The estimation of the spatially variable surface moisture and heat fluxes of natural, semivegetated landscapes is difficult due to the highly random nature of the vegetation (e.g., plant species, density, and stress) and the soil (e.g., moisture content, and soil hydraulic conductivity). The solution to that problem lies, in part, in the use of satellite remotely sensed data, and in the preparation of those data in terms of the physical properties of the plant and soil. The work was focused on the development and testing of a stochastic geometric canopy-soil reflectance model, which can be applied to the physically-based interpretation of LANDSAT images. The model conceptualizes the landscape as a stochastic surface with bulk plant and soil reflective properties. The model is particularly suited for regional scale investigations where the quantification of the bulk landscape properties, such as fractional vegetation cover, is important on a pixel by pixel basis. A summary of the theoretical analysis and the preliminary testing of the model with actual aerial radiometric data is provided.

  13. Enhancement of surface properties for coal beneficiation

    Energy Technology Data Exchange (ETDEWEB)

    Chander, S.; Aplan, F.F.

    1992-01-30

    This report will focus on means of pyrite removal from coal using surface-based coal cleaning technologies. The major subjects being addressed in this study are the natural and modulated surface properties of coal and pyrite and how they may best be utilized to facilitate their separation using advanced surface-based coal cleaning technology. Emphasis is based on modified flotation and oil agglomerative processes and the basic principles involved. The four areas being addressed are: (1) Collectorless flotation of pyrite; (2) Modulation of pyrite and coal hydrophobicity; (3) Emulsion processes and principles; (4) Evaluation of coal hydrophobicity.

  14. Landscape position and surface curvature effects on soils developed in the Palouse area, Washington

    Science.gov (United States)

    Girgin, Burhan N.; Frazier, Bruce E.

    1996-11-01

    The Palouse region of eastern Washington is characterized by complex rolling hills with high erosion susceptibility. Various aspect and slope classes along with different soil types also create complex patterns in soil fertility and crop productivity. Division of fields into different units and addressing each unit as a separate management zone has been gaining importance in recent years. Landscape modeling is one of the tools that helps define management zones based on the spatial variability of the soil and topographic characteristics. In addition to comprehensive models, there is an increasing demand for simpler techniques to assist planners with field scale, day-to-day land management. The objective of this study was to develop a simple landscape model within a geographical information systems (GIS) framework to evaluate the effects of spatial variability of topographic factors on soil genesis. For this purpose, a commercial wheat farm was chosen as the research site and a digital elevation model (DEM) of the site was prepared. Landscape parameters such as slope, aspect and tangential curvature were calculated. GIS overlay of these values were georeferenced and combined with other data layers such as soil maps and air photos. Soil samples were collected on three different transects and representative pits were opened for further evaluation of soil properties. Depth to E horizon was measured for all sampling locations. Results indicate that spatial distribution of E horizon can be estimated by surface curvature, slope and aspect. Study also shows that contrasting soils that are in close proximity to each other, too close to be separated on conventional soil maps, can be detected with the help of landscape parameters. Big map units that extend over several hillslope positions can be further divided into smaller units to receive separate agricultural management based on soil, water relationships defined by these landscape parameters.

  15. Physically plausible prescription of land surface model soil moisture

    Science.gov (United States)

    Hauser, Mathias; Orth, René; Thiery, Wim; Seneviratne, Sonia

    2016-04-01

    Land surface hydrology is an important control of surface weather and climate, especially under extreme dry or wet conditions where it can amplify heat waves or floods, respectively. Prescribing soil moisture in land surface models is a valuable technique to investigate this link between hydrology and climate. It has been used for example to assess the influence of soil moisture on temperature variability, mean and extremes (Seneviratne et al. 2006, 2013, Lorenz et al., 2015). However, perturbing the soil moisture content artificially can lead to a violation of the energy and water balances. Here we present a new method for prescribing soil moisture which ensures water and energy balance closure by using only water from runoff and a reservoir term. If water is available, the method prevents soil moisture decrease below climatological values. Results from simulations with the Community Land Model (CLM) indicate that our new method allows to avoid soil moisture deficits in many regions of the world. We show the influence of the irrigation-supported soil moisture content on mean and extreme temperatures and contrast our findings with that of earlier studies. Additionally, we will assess how long into the 21st century the new method will be able to maintain present-day climatological soil moisture levels for different regions. Lorenz, R., Argüeso, D., Donat, M.G., Pitman, A.J., den Hurk, B.V., Berg, A., Lawrence, D.M., Chéruy, F., Ducharne, A., Hagemann, S. and Meier, A., 2015. Influence of land-atmosphere feedbacks on temperature and precipitation extremes in the GLACE-CMIP5 ensemble. Journal of Geophysical Research: Atmospheres. Seneviratne, S.I., Lüthi, D., Litschi, M. and Schär, C., 2006. Land-atmosphere coupling and climate change in Europe. Nature, 443(7108), pp.205-209. Seneviratne, S.I., Wilhelm, M., Stanelle, T., Hurk, B., Hagemann, S., Berg, A., Cheruy, F., Higgins, M.E., Meier, A., Brovkin, V. and Claussen, M., 2013. Impact of soil moisture

  16. Assessment of Soil Health in Urban Agriculture: Soil Enzymes and Microbial Properties

    Directory of Open Access Journals (Sweden)

    Avanthi Deshani Igalavithana

    2017-02-01

    Full Text Available Urban agriculture has been recently highlighted with the increased importance for recreation in modern society; however, soil quality and public health may not be guaranteed because of continuous exposure to various pollutants. The objective of this study was to evaluate the soil quality of urban agriculture by soil microbial assessments. Two independent variables, organic and inorganic fertilizers, were considered. The activities of soil enzymes including dehydrogenase, β-glucosidase, arylsulfatase, urease, alkaline and acid phosphatases were used as indicators of important microbial mediated functions and the soil chemical properties were measured in the soils applied with organic or inorganic fertilizer for 10 years. Fatty acid methyl ester analysis was applied to determine the soil microbial community composition. Relatively higher microbial community richness and enzyme activities were found in the organic fertilizers applied soils as compared to the inorganic fertilizers applied soils. Principal component analysis explained the positive influence of organic fertilizers on the microbial community. The application of organic fertilizers can be a better alternative compared to inorganic fertilizers for the long-term health and security of urban agriculture.

  17. Influence of green manure fertilization on soil enzyme activities and other soil properties

    Directory of Open Access Journals (Sweden)

    Alina Dora SAMUEL

    2007-05-01

    Full Text Available Agricultural practices that improve agricultural sustainability are needed particularly for brown luvic soil. Soil enzyme activities can provide information on how soil management is affecting the processes in soil such as decomposition and nutrient cycling. Soil enzyme activities (actual and potential dehydrogenase, catalase, acid and alkaline phosphatase were determined in the 0–10, 10–20, and 20–30 cm layers of a brown luvic soil submitted to a complex fertilization experiment with different types of green manure. It was found that each activity decreased with increasing sampling depth. It should be emphasized that green-manuring of maize led to a significant increase in each of the five enzymatic activities determined. The enzymatic indicators of soil quality calculated from the values of enzymatic activities showed the order: lupinus + rape + oat > lupinus > vetch + oat + ryegrass > lupinus + oat + vetch > unfertilized plot. This order means that by determination of enzymatic activities valuable information can be obtained regarding fertility status of soils. There were significant correlations of soil enzyme activities with physical properties.

  18. Influences of Soil Physical Properties on Water—Supplying Capacity

    Institute of Scientific and Technical Information of China (English)

    ZHAOBINGZI; XUFUAN; 等

    1997-01-01

    The water-supplying capacity of two agricltural soils red soil in Jiangxi Province and meadow sol in Henan Province,was assessed mainly using physical investigations.The reticulated mottling horizon in the red soil was a horizon limiting roots distribution due to its high density and hardness in structure and low pH(pH5.05),The reistance of the red soil to drought hazard was poor because of its low water-supply capacity and poor hydraulic conductivity.The meadow soil had superior profile infiltration to that of the red soil and great available water-storage capacity,which resulted in low run-off loss,espectially in the wheat-growth season.It was difficult for water stored in the deep layers of the meadow soil to reach the surface due to the low unsaturated hydraulic conductivity of its clay-rich horizon in subsoil,Howver,water stored in deep layers was still available because the roots could extend to the deep layers due to the relatively low density in soil structure.

  19. Computer Implementation of the Bounding Surface Plasticity Model for Cohesive Soils.

    Science.gov (United States)

    1983-12-01

    23 REFERENCES 1. Dafalias, Y.F., and L.R. Herrmann, "A Bounding Surface Soil Plasticity Model", Proceedings of the International Symposium of Soils...Herrmann, "Bounding Surface Formulatin of Soil Plasticity ", Chapter in Soil Mechanics - Transient and Cyclic Loads, John Wiley and Sons, Eds. O.C...Herrmann and Y.F. r)afalias, "User’s Manual for MODCAL-Bounding Surface Soil Plasticity Model Calibration and Prediction Code (Volume I)," Civil

  20. NH 3 soil and soil surface gas measurements in a triticale wheat field

    Science.gov (United States)

    Neftel, A.; Blatter, A.; Gut, A.; Högger, D.; Meixner, F.; Ammann, C.; Nathaus, F. J.

    We present a new approach for a continuous determination of NH 3 concentration in the open pore space of the soil and on the soil surface. In a semi-permeable membrane of 0.5 m length a flow of 0.5 s1pm maintained. In the tube the NH 3 concentration adjusts itself to the surrounding air concentration by diffusion through the membrane. Continuous measurements have been performed in a triticale wheat field over a period of several weeks in a field experiment at Bellheim (FRG) during June and July 1995 within the frame of the European program EXAMINE (Exchange of Atmospheric Ammonia with European Ecosystems). Soil concentrations are generally below the detection limit of 0.1 μg m -3. We conclude, that the investigated soil is generally a sink for NH 3. The NH 3 concentration on the soil surface shows a diurnal variation due to a combination of physico-chemical desorption and adsorption phenomena associated with changes in wetness of the surrounding surfaces and the NH 3 concentration in the canopy.

  1. An Assessment of Soil Properties under Different Landuse Types of the Kallada River Basin, Kerala, India

    Directory of Open Access Journals (Sweden)

    Mathew Suma

    2011-03-01

    Full Text Available A thin layer of soil covers most of the earth's land surface. This layer varying from a few centimeters to 2 or 3 meters in thickness might appear insignificant relative to the bulk of the earth. On the basis of morphological features and physico chemical properties, the soils of the Kallada basin can be classified into broad six groups (1 Coastal alluviam 2 Riverine alluviam 3 Brown hydromorphic 4 Greyish Onattukara soil 5 Laterite soil and 6Forest loam (GSI Map. Twenty four soil profiles were collected from the Kallada river basin for analysis, whose 12 profiles are in one cluster distributed adjoining the Western Ghats crest. As many as 12 profiles were under forest, three under grasslands, three under teak plantations, two under mixed tree crops, two under tea plantation and one each from eucalyptus and rubber plantations. Soil is a rich but fragile ecosystem. It is a three-phase system, composed of solid, liquid and gaseous phases.  In most soils, the solid phase makes up the vast majority of the soil mass, and over half of its volume.  It consists of mineral matter derived from the weathering of rocks and organic matter from the decomposition of plants and animals.  The liquid phase is composed predominantly of water, enriched with dissolved solids, the gaseous phase of air, enriched with carbon dioxide from the respiration of soil animals and plant roots. Physical properties of the soil are determined by the character of solid particles and the way in which they are packed together.

  2. 土壤耕作部件宏观触土曲面减阻性能研究现状分析%Actuality Analysis of Resistance-reducing Properties on Soil Cultivating Components with Different Macroscopic Soil-engaging Surfaces

    Institute of Scientific and Technical Information of China (English)

    郭志军; 杜干; 周志立; 张鹏; 李亦轩

    2011-01-01

    对土壤耕作部件宏观触土曲面进行优化设计可有效减小工作阻力,设计的耕作部件具有结构简单、成本低、无额外能耗等特点.构成耕作部件宏观触土曲面的元线、准线及元线相对于准线的运动方式均会对工作阻力产生重要影响.从准线曲率的角度对各种土壤耕作部件触土曲面进行分类.阐述了耕作部件宏观触土曲面主要几何参数:宽度、切削角、耕作深度、宽深比和纵深比等对工作阻力的影响.特别分析了不同准线形式触土曲面,包括直线、圆弧、简单曲线及变曲率复杂曲线等触土曲面对工作阻力及土壤扰动的影响.%The working resistance of soil cultivating component can be reduced efficiently by way of optimizing its macroscopic soil-engaging surface. The cultivating component designed by this method possesses the features of simple structure, low cost and energy-saving. The forms of generatrix and directrix, and the way of generatrix slides along the directrix would seriously affect the working resistance of soil cultivating component. The macroscopic soil-engaging surfaces of soil cultivating components were classified mainly by viewpoint of the curvature profile of the directrix. How the geometric parameters of the macroscopic soil-engaging surface of soil cultivating component affect the working resistance was introduced, including the width, cutting angle, cultivating depth, ratio of width and depth, ratio of length and depth, etc. The soil-engaging surfaces with different kinds of directrixes, including straight line, normal circular curve, simple curve and complex curvature-changing curve, were especially analyzed to uncover their affection to working resistance and soil disturbance.

  3. Physico-chemical surface properties of microalgae.

    Science.gov (United States)

    Ozkan, Altan; Berberoglu, Halil

    2013-12-01

    This study reports a comprehensive set of experimentally measured physico-chemical surface properties of 12 different microalgae including fresh and seawater species of green algae, diatoms and cyanobacteria. The surface free energy and its components including the acid-base (AB), van der Waals (LW), electron donor/acceptor parameters were quantified based on contact angle measurements along with the Lifshitz-van der Waals acid-base approach using the probe liquid surface tension parameters proposed by van Oss et al. as well as by Della Volpe and Siboni. Moreover, the zeta and surface potentials of all species were determined using electrophoretic mobility measurements along with using Smoluchowski's model. Finally, the free energy of cohesion of the microalgae was also determined based on the calculated surface energy properties. The results showed that the electron donor parameter correlated well with the free energy of cohesion in all groups of microalgae. Moreover, species known to form colonies and exhibit benthic cultures had distinctly hydrophobic surfaces compared to microalgae prefering planktonic growth. These results indicate the importance of surface hydrophobicity for causing biofouiling or flocculation of cultures. Finally, the zeta potentials did not show a distinctive trend with the types of microalgae but the surface potentials were markedly larger for the salt water species. The reported methods and data are expected to provide critical information for researchers and technology developers concerned with cell to cell and cell to substrata interactions of microalgae in algal biomass cultivation and harvesting, biofouling of membranes and surfaces, as well as cell-surface interactions in photosynthetic microbial fuel cell technologies.

  4. Improvement Of Sub-Grade Soil Properties Using Admixture Quarry Dust And Woven Geo-Textile

    Directory of Open Access Journals (Sweden)

    G. Priya Vasudha

    2015-08-01

    Full Text Available Abstract The important factor for design and construction of pavement is the behavior of underlying sub-grade. Large deformations in the sub-grade will lead to a continuous deterioration of the paved surface. As the sub-grade soil is too weak to bear the load engineering solutions such as geo reinforcement using geo-synthetics are additives which are earlier used in sub-grade improvement and such experimental study is carried by pervious authors. This paper deals with the sub-grade improvement using geo-textile as a reinforcement sheet and quarry dust as admixtures. In order to increase the strength of the sub-grade the quarry dust is varied with different percentages i.e. 0 5 10 15 20 and 25. In this study Proctors compaction tests and CBR soaked and unsoaked tests are conducted on locally available soil with reinforced material and with admixture. For this study it is identified that the engineering properties of the soil is improved in all conditions. The soil with quarry dust at optimum value is 20 has CBR soaked value is obtained 6.83 and unsoaked value is obtained 7.02 is increased when compared with conventionally soil. The soil quarry dust at optimum value is at 20 and Geo-textile has CBR soaked value is 6.59 and unsoaked value is 8.95 is increased when compared with conventionally soil and soil with quarry dust.

  5. Surface-tension properties of hyaluronic Acid.

    Science.gov (United States)

    Knepper, P A; Covici, S; Fadel, J R; Mayanil, C S; Ritch, R

    1995-06-01

    The maintenance of flow channels in the trabecular meshwork is dependent, in part, on the patency of the trabecular spaces. Because the amount of hyaluronic acid decreases in the trabecular meshwork of patients with primary open-angle glaucoma, a change in surface tension may be one of the effects of hyaluronic acid on aqueous outflow. The surface-active properties of hyaluronic acid (concentration of 0.156-2.5 mg/ml; molecular weights of 100,000, 500,000, and 4,000,000) in deionized water, Ringer's lactate, Ringer's lactate plus 0.06 mg/ml bovine serum albumin, and mock aqueous solution were tested using the drop volume method. At a hyaluronic acid concentration of 0.312 mg/ml, surface tension decreased; at higher concentrations, a further decrease in surface tension was observed. In the presence of Ringer's lactate, the 100,000-MW hyaluronic acid was more active than the 4,000,000-MW hyaluronic acid. In the presence of Ringer's lactate plus bovine serum albumin or mock aqueous solution, the influence of surface tension of the 100,000-MW hyaluronic acid was moderated: with lower hyaluronic acid concentrations, the decline in surface tension was more than with Ringer's lactate, but with higher hyaluronic acid concentrations, the decline in surface tension was less than with Ringer's lactate. At high concentration, hyaluronic acid behaves like a non-Newtonian fluid, becomes more viscous, and may act to "seal" the trabecular space. The results of this study indicate that hyaluronic acid possesses surface-active properties, which is just one of several properties of hyaluronic acid that may influence aqueous outflow resistance.

  6. Carbon black retention in saturated natural soils: Effects of flow conditions, soil surface roughness and soil organic matter.

    Science.gov (United States)

    Lohwacharin, J; Takizawa, S; Punyapalakul, P

    2015-10-01

    We evaluated factors affecting the transport, retention, and re-entrainment of carbon black nanoparticles (nCBs) in two saturated natural soils under different flow conditions and input concentrations using the two-site transport model and Kelvin probe force microscopy (KPFM). Soil organic matter (SOM) was found to create unfavorable conditions for the retention. Despite an increased flow velocity, the relative stability of the estimated maximum retention capacity in soils may suggest that flow-induced shear stress forces were insufficient to detach nCB. The KPFM observation revealed that nCBs were retained at the grain boundary and on surface roughness, which brought about substantial discrepancy between theoretically-derived attachment efficiency factors and the ones obtained by the experiments using the two-site transport model. Thus, decreasing ionic strength and increasing solution pH caused re-entrainment of only a small fraction of retained nCB in the soil columns.

  7. Inverse modeling of soil water content to estimate the hydraulic properties of a shallow soil and the associated weathered bedrock

    Science.gov (United States)

    Le Bourgeois, O.; Bouvier, C.; Brunet, P.; Ayral, P.-A.

    2016-10-01

    Modeling soil water flow requires the knowledge of numerous parameters associated to the water content and the soil hydraulic properties. Direct estimations of those parameters in laboratory require expensive equipment and the obtained parameters are generally not representative at the field scale because of the limitation of core sample size. Indirect methods such as inverse modeling are known to get efficient estimations and are easier to set up and process for large-scale studies. In this study, we investigated the capacity of an inverse modeling procedure to estimate the soil and the bedrock hydrodynamic properties only from in situ soil water content measurements at multiple depths under natural conditions. Multi-objective parameter optimization was performed using the HYDRUS-1D software and an external optimization procedure based on the NSGA-II algorithm. In a midslope shallow soil, water content was monitored at 3 depths, 20, 40, and 60 cm during 12 intense rainfall events, whose amounts ranged between 50 and 250 mm and duration between 1 and 5 days. The vertical profile was considered as 2 layers of soils above a third layer representing the weathered schist rock. This deep layer acted as a deep boundary condition, which features the bedrock permeability and water storage. Each layer was described trough the 6 parameters of the Mualem-van Genuchten formulation. The calibrated parameters appeared to have very low uncertainty while allowing a good modelisation of the observed water content variations. The calibrated saturated water content was close to the laboratory porosity measurements while the saturated hydraulic conductivity showed that the soil was highly permeable, as measured in the field. The inverse modeling approach allowed an estimation of the hydraulic properties of the bedrock layer where no measurement was available. The bedrock layer was found to have a low saturated hydraulic conductivity (model failed sometimes to reproduce the saturation

  8. Fourier and granulometry methods on 3D images of soil surfaces for evaluating soil aggregate size distribution

    DEFF Research Database (Denmark)

    Jensen, T.; Green, O.; Munkholm, Lars Juhl;

    2016-01-01

    The goal of this research is to present and compare two methods for evaluating soil aggregate size distribution based on high resolution 3D images of the soil surface. The methods for analyzing the images are discrete Fourier transform and granulometry. The results of these methods correlate...... with a measured weight distribution of the soil aggregates. The results have shown that it is possible to distinguish between the cultivated and the uncultivated soil surface. A sensor system suitable for capturing in-situ high resolution 3D images of the soil surface is also described. This sensor system...... is based on a SICK LMS111 laser range scanner....

  9. Assessment of Temporal and spatial variability of soil hydraulic properties and its implications on soil water content predictions for a maize field in Northern Italy

    Science.gov (United States)

    Feki, Mouna; Ravazzani, Giovanni; Ceppi, Alessandro; Mancini, Marco

    2016-04-01

    Use of hydrological models to simulate water movement from soil surface to groundwater requires intensive, time consuming and expensive soil related parameters collection, such as, water retention curve (WRC) parameters and hydraulic conductivity (K).Typically, soils to be characterized, , exhibit large variations in space and time as well during the cropping cycle, due to biological processes and agricultural management practices : tillage , irrigation , fertilization and harvest. Soil properties are subjected to diverse physical and chemical changes that leads to a non-stability in term of water and chemical movements within the soil as well to the groundwater. The aim of this study is to assess the variability of soil hydraulic properties dynamics over a cropping cycle. The study site is a surface irrigated Maize field (typical in this area) located in Secugnago (45°13'31.70'' N, 9°36'26.82 E), in Northern Italy-Lombardy region. The field belongs to the Consortium Muzza Bassa Lodigiana, within which meteorological data together with soil moisture were monitored during the cropping season of 2015 . To investigate soil properties variations, both measurements in the field and laboratory tests on both undisturbed and disturbed collected samples were performed. Soil samples were taken from different locations within the study area and at different depths( 0cm , 20cm and 40cm) as well at different growth stages of the plant ,after irrigation events or tillage and as well after harvest. During three measuring campaigns, for each soil samples several parameters were monitored (Organic matter , bulk density) together with soil-water related parameters (Soil water retention curve parameters , saturated hydraulic conductivity). Soil water retention curves parameters were measured following the evaporative method, using the Hyprop (Hydraulic Property Analyzer; UMS Munich, 2010). Parameters were assessed using Hyprop-fit software, by fitting data to Brooks and Corey and

  10. Fixation of soil surface contamination using natural polysaccharides

    Energy Technology Data Exchange (ETDEWEB)

    Sackschewsky, M.R.

    1993-09-01

    Natural polysaccharides were evaluated as alternatives to commercially available dust-control agents for application in buried-waste and contaminated-soil remediation situations. Materials were identified and evaluated with specific criteria in mind: the materials must be environmentally benign and must not introduce any additional hazardous materials; they must be effective for at least 2 or 3 days, but they do not necessarily have to be effective for more than 2 to 3 weeks; they should be relatively resistant to light traffic; they must not interfere with subsequent soil treatment techniques, especially soil washing; and they must be relatively inexpensive. Two products, a pregelled potato starch and a mixture of carbohydrates derived from sugar beets, were selected for evaluation. Testing included small- and large-scale field demonstrations, laboratory physical property analyses, and wind-tunnel evaluations.

  11. Sorption of organic carbon compounds to the fine fraction of surface and Subsurface Soils

    Energy Technology Data Exchange (ETDEWEB)

    Jagadamma, Sindhu [ORNL; Mayes, Melanie [ORNL; Zinn, Yuri [Federal University of Lavras, Brazil; Gisladottir, Gudrun [University of Iceland; Ann, Russell [Iowa State University

    2014-01-01

    Dissolved organic carbon (DOC) transported from the soil surface is stabilized in deeper soil profiles by physicochemical sorption processes. However, it is unclear how different forms of organic carbon (OC) compounds common in soil organic matter interact with soil minerals in the surface (A) and subsurface (B) horizons. We added four compounds (glucose, starch, cinnamic acid and stearic acid) to the silt- and clay-sized fraction (fine fraction) of A and B horizons of eight soils from varying climates (3 temperate, 3 tropical, 1 arctic and 1 sub-arctic). Equilibriumbatch experiments were conducted using 0 to 100 mg C L 1 of 14C-labeled compounds for 8 h. Sorption parameters (maximum sorption capacity, Qmax and binding coefficient, k) calculated by fitting sorption data to the Langmuir equation showed that Qmax of A and B horizons was very similar for all compounds. Both Qmax and k values were related to sorbate properties, with Qmax being lowest for glucose (20 500 mg kg 1), highest for stearic acid (20,000 200,000 mg kg 1), and intermediate for both cinnamic acid (200 4000 mg kg 1) and starch (400 6000 mg kg 1). Simple linear regression analysis revealed that physicochemical properties of the sorbents influenced the Qmax of cinnamic acid and stearic acid, but not glucose and starch. The sorbent properties did not show predictive ability for binding coefficient k. By using the fine fraction as sorbent, we found that the mineral fractions of A horizons are equally reactive as the B horizons irrespective of soil organic carbon content.

  12. Properties of soil and hydroponicaly grown lettuce

    OpenAIRE

    Mlakar, Mirjam

    2014-01-01

    The aim of the thesis was to examine the quality of the lettuce Lactuca sativa L., which was grown with two methods. Hydroponically grown lettuce was compared with lettuce grown in soil. The purpose of this research was to find out with which method the lettuce would look better and with which method the quality of the lettuce`s nutritiousness would be higher. We ascertained that plants grown with hydroponics did look better and were heavier. About quality results showed that the contents of ...

  13. Influence of soil amendments and soil properties on macro– and micronutrient availability to microorganisms and plants

    OpenAIRE

    Ramezanian Bajgiran, Atefeh

    2013-01-01

    Utilising by-products from industrial and domestic activities and from bioenergy production is one of the new ways of recovering and re-using nutrient resources in agriculture. However, these by-products can potentially add toxic elements or alter soil properties in ways that harm the soil and related environments. This thesis investigated the efficacy and potential adverse effects of using organic (biogas digestate, pot ale) and inorganic (rockdust, wood ash) by-products as amendments on the...

  14. Vertical variations of soil hydraulic properties within two soil profiles and its relevance for soil water simulations

    Science.gov (United States)

    Schwen, Andreas; Zimmermann, Michael; Bodner, Gernot

    2014-08-01

    Numerical simulations of soil water dynamics can be valuable tools for the assessment of different soil and land management practices. For accurate simulations, the soil hydraulic properties (SHP), i.e. the hydraulic conductivity and water retention function have to be properly known. They can be either estimated from physical soil properties by pedotransfer functions (PTF) or measured. In most studies, soil profiles are analyzed and sampled with respect to their pedogenic horizons. While considerable effort has been put on horizontal spatial SHP variations, vertical changes within soil profiles have not been analyzed in detail. Therefore, the objectives of this study were (i) the SHP measurement along vertical transects within two soil profiles, (ii) to evaluate their spatial variation and correlation with physical soil properties, and (iii) to assess the impact of the SHP determination method and its spatial discretization on simulated soil water balance components. Two soils, an agriculturally used silty-loam Chernozem and a forested sandy Cambisol were sampled in 0.05 m increments along vertical transects. The parameters of a dual porosity model were derived using the evaporation method and scaling was applied to derive representative mean SHP parameters and scaling factors as a measure of spatial variability. State-space models described spatial variations of the scaling factors by physical soil properties. Simulations with HYDRUS 1D delivered the soil water balance for different climatic conditions with the SHP being estimated from horizon-wise PTFs, or discretized either sample-wise, according to the pedogenic horizons, or as hydrologically relevant units (hydropedological approach). Considerable SHP variations were found for both soil profiles. In the Chernozem, variations of the hydraulic conductivity were largest within the ploughed Ap-horizon and could be attributed to variations in soil structure (macropores). In the subsoil, soil water retention showed

  15. Basic soil properties as a factor controlling the occurrence and intensity of water repellency in rankers of the White Carpathians

    Directory of Open Access Journals (Sweden)

    Kořenková Lucia

    2015-09-01

    Full Text Available Water repellency in soils is controlled by many different factors, basic physical and chemical properties might be considered the crucial ones. For the purpose of this study, 12 sites were selected and sampled (0–20 cm depth in the White Carpathians. Repellency tests were conducted under laboratory conditions in triplicate using water drop penetration time (WDPT test and the molarity of ethanol droplet (MED test. Results of WDPT measurements showed that three samples were marked by slight to extreme water repellency. Regarding the relationship between WDPT/MED and tested soil properties, the highest value of correlation coefficient was calculated for soil organic carbon (r = 0.706; p < 0.05, suggesting there is a positive, statistically significant correlation between repellency severity and total carbon content. A negative relationship between repellency and soil reaction/silt/silt + clay contents of studied soils was found. Samples taken from the surface horizon of arable soils showed no repellency.

  16. General relationships between abiotic soil properties and soil biota across spatial scales and different land-use types.

    Directory of Open Access Journals (Sweden)

    Klaus Birkhofer

    Full Text Available Very few principles have been unraveled that explain the relationship between soil properties and soil biota across large spatial scales and different land-use types. Here, we seek these general relationships using data from 52 differently managed grassland and forest soils in three study regions spanning a latitudinal gradient in Germany. We hypothesize that, after extraction of variation that is explained by location and land-use type, soil properties still explain significant proportions of variation in the abundance and diversity of soil biota. If the relationships between predictors and soil organisms were analyzed individually for each predictor group, soil properties explained the highest amount of variation in soil biota abundance and diversity, followed by land-use type and sampling location. After extraction of variation that originated from location or land-use, abiotic soil properties explained significant amounts of variation in fungal, meso- and macrofauna, but not in yeast or bacterial biomass or diversity. Nitrate or nitrogen concentration and fungal biomass were positively related, but nitrate concentration was negatively related to the abundances of Collembola and mites and to the myriapod species richness across a range of forest and grassland soils. The species richness of earthworms was positively correlated with clay content of soils independent of sample location and land-use type. Our study indicates that after accounting for heterogeneity resulting from large scale differences among sampling locations and land-use types, soil properties still explain significant proportions of variation in fungal and soil fauna abundance or diversity. However, soil biota was also related to processes that act at larger spatial scales and bacteria or soil yeasts only showed weak relationships to soil properties. We therefore argue that more general relationships between soil properties and soil biota can only be derived from future

  17. Soil fertility, nutrition and yield of maize and barley with gypsum application on soil surface in no-till

    Directory of Open Access Journals (Sweden)

    Leandro Michalovicz

    2014-10-01

    Full Text Available Annual crop yield and nutrition have shown differentiated responses to modifications in soil chemical properties brought about by gypsum application. The aim of this study was to evaluate the effect of gypsum application rates on the chemical properties of a Latossolo Bruno (Clayey Oxisol, as well as on the nutrition and yield of a maize-barley succession under no-till. The experiment was set up in November 2009 in Guarapuava, Parana, Brazil, applying gypsum rates of 0.0, 1.5, 3.0, 4.5, and 6.0 Mg ha-1 to the soil surface upon sowing maize, with crop succession of barley. Gypsum application decreased the levels of Al3+ and Mg2+ in the 0.0-0.1 m layer and increased soil pH in the layers from 0.2-0.6 m depth. Gypsum application has increased the levels of Ca2+ in all soil layers up to 0.6 m, and the levels of S-SO4(2- up to 0.8 m. In both crops, the leaf concentrations of Ca and S were increased while Mg concentrations have decreased as a function of gypsum rates. There was also an effect of gypsum rates on grain yield, with a quadratic response of maize and a linear increase for barley. Yield increases were up to 11 and 12 % in relation to control for the maximum technical efficiency (MTE rates of 3.8 and 6.0 Mg ha-1 of gypsum, respectively. Gypsum application improved soil fertility in the profile, especially in the subsurface, as well as plant nutrition, increasing the yields of maize and barley.

  18. Effects of Land Use Changes on Some Soil Chemical Properties in Khoy, West Azerbaijan Province

    Directory of Open Access Journals (Sweden)

    Arezoo Taghipour

    2016-02-01

    Full Text Available Introduction: Intensified agriculture over a long-term is an important factor in soil change phenomena that can cause some unwanted effects on soil properties. To examine this hypothesis, chemical properties of the soils under sunflower cultivation over five decades and adjoining virgin lands were investigated in order to monitor changes caused by long-term cropping. The studied soils are influenced by continuous sunflower cultivation along with flooding irrigation and using chemical fertilizers for over five decades Materials and Methods: This research was undertaken at Khoy area (38o 10′ to 38o 40′ N latitude and 44o 15′ to 45o 10′ E latitude as the northern part of western-Azarbaijan province in the north-west Iran. The Khoy area is characterized by a semi-arid climate (mean annual rainfall of 300 mm linked with soil moisture and temperature regimes of xeric and mesic, respectively. Agriculturally, the studied area is cropped continuously by sunflower-wheat or barley rotations for over five decades and has received irrigation water from rainfall, groundwater, or seasonal river water. Forty soil surface samples (0-30 cm belonging to 10 soil series from the cultivated soils and the adjoining uncultivated soils were samplied and analyzed for the different chemical properties. In each soil serie, the samples (cultivated soil and adjacent virgin land were selected in similar slope, aspect, drainage condition, and parent materials. Soil analyses were involved soil pH and electrical conductivity (EC, soil organic carbon (SOC, Calcium carbonate equivalent (CCE, cation exchange capacity (CEC, total N, soluble K, exchangeable K, and available K. Potassium absorption ration (PAR was calculated by the concentration of solution K, Ca, Mg and exchangeable potassium percentage (EPP was calculated by exchangeable Na and CEC values Results and Discussion: This study illustrate that long-term continuous sunflower cropping had considerable effects on

  19. Soil physical properties of high mountain fields under bauxite mining

    Directory of Open Access Journals (Sweden)

    Dalmo Arantes de Barros

    2013-10-01

    Full Text Available Mining contributes to the life quality of contemporary society, but can generate significant impacts, these being mitigated due to environmental controls adopted. This study aimed to characterize soil physical properties in high-altitude areas affected by bauxite mining, and to edaphic factors responses to restoration techniques used to recover mined areas in Poços de Caldas plateau, MG, Brazil. The experiment used 3 randomized block design involving within 2 treatments (before mining intervention and after environmental recovery, and 4 replicates (N=24. In each treatment, soil samples with deformed structures were determined: granulometry, water-dispersible clay content, flocculation index, particle density, stoniness level, water aggregate stability, and organic matter contend. Soil samples with preserved structures were used to determine soil density and the total volume of pores, macropores, and micropores. Homogenization of stoniness between soil layers as a result of soil mobilization was observed after the mined area recovery. Stoniness decreased in 0.10-0.20 m layer after recovery, but was similar in the 0-0.10 m layer in before and after samples. The recovery techniques restored organic matter levels to pre-mining levels. However, changes in soil, including an increase in soil flocculation degree and a decrease in water-dispersible clays, were still apparent post-recovery. Furthermore, mining operations caused structural changes to the superficial layer of soil, as demonstrated by an increase in soil density and a decrease in total porosity and macroporosity. Decreases in the water stability of aggregates were observed after mining operations.

  20. Disentangling above- and below-ground facilitation drivers in arid environments: the role of soil microorganisms, soil properties and microhabitat.

    Science.gov (United States)

    Lozano, Yudi M; Armas, Cristina; Hortal, Sara; Casanoves, Fernando; Pugnaire, Francisco I

    2017-03-06

    Nurse plants promote establishment of other plant species by buffering climate extremes and improving soil properties. Soil biota plays an important role, but an analysis to disentangle the effects of soil microorganisms, soil properties and microclimate on facilitation is lacking. In three microhabitats (gaps, small and large Retama shrubs), we placed six microcosms with sterilized soil, two per soil origin (i.e. from each microhabitat). One in every pair received an alive, and the other a sterile, inoculum from its own soil. Seeds of annual plants were sown into the microcosms. Germination, survival and biomass were monitored. Soil bacterial communities were characterized by pyrosequencing. Germination in living Retama inoculum was nearly double that of germination in sterile inoculum. Germination was greater under Retama canopies than in gaps. Biomass was up to three times higher in nurse than in gap soils. Soil microorganisms, soil properties and microclimate showed a range of positive to negative effects on understory plants depending on species identity and life stage. Nurse soil microorganisms promoted germination, but the effect was smaller than the positive effects of soil properties and microclimate under nurses. Nurse below-ground environment (soil properties and microorganisms) promoted plant growth and survival more than nurse microhabitat. © 2017 The Authors. New Phytologist © 2017 New Phytologist Trust.

  1. Spatial variability of soil properties and soil erodibility in the Alqueva dam watershed, Portugal

    Science.gov (United States)

    Ferreira, V.; Panagopoulos, T.; Andrade, R.; Guerrero, C.; Loures, L.

    2015-01-01

    The aim of this work is to investigate how the spatial variability of soil properties and soil erodibility (K factor) were affected by the changes in land use allowed by irrigation with water from a reservoir in a semiarid area. To this, three areas representative of different land uses (agroforestry grassland, Lucerne crop and olive orchard) were studied within a 900 ha farm. The interrelationships between variables were analyzed by multivariate techniques and extrapolated using geostatistics. The results confirmed differences between land uses for all properties analyzed, which was explained mainly by the existence of diverse management practices (tillage, fertilization and irrigation), vegetation cover and local soil characteristics. Soil organic matter, clay and nitrogen content decreased significantly, while K factor increased with intensive cultivation. The HJ-biplot methodology was used to represent the variation of soil erodibility properties grouped in land uses. Native grassland was the least correlated with the other land uses. K factor demonstrated high correlation mainly with very fine sand and silt. The maps produced with geostatistics were crucial to understand the current spatial variability in the Alqueva region. Facing the intensification of land-use conversion, a sustainable management is needed to introduce protective measures to control soil erosion.

  2. Spatial variability of soil properties and soil erodibility in the Alqueva reservoir watershed

    Science.gov (United States)

    Ferreira, V.; Panagopoulos, T.; Andrade, R.; Guerrero, C.; Loures, L.

    2015-04-01

    The aim of this work is to investigate how the spatial variability of soil properties and soil erodibility (K factor) were affected by the changes in land use allowed by irrigation with water from a reservoir in a semiarid area. To this end, three areas representative of different land uses (agroforestry grassland, lucerne crop and olive orchard) were studied within a 900 ha farm. The interrelationships between variables were analyzed by multivariate techniques and extrapolated using geostatistics. The results confirmed differences between land uses for all properties analyzed, which was explained mainly by the existence of diverse management practices (tillage, fertilization and irrigation), vegetation cover and local soil characteristics. Soil organic matter, clay and nitrogen content decreased significantly, while the K factor increased with intensive cultivation. The HJ-Biplot methodology was used to represent the variation of soil erodibility properties grouped in land uses. Native grassland was the least correlated with the other land uses. The K factor demonstrated high correlation mainly with very fine sand and silt. The maps produced with geostatistics were crucial to understand the current spatial variability in the Alqueva region. Facing the intensification of land-use conversion, a sustainable management is needed to introduce protective measures to control soil erosion.

  3. Spatial variability of soil properties and soil erodibility in the Alqueva dam watershed, Portugal

    Directory of Open Access Journals (Sweden)

    V. Ferreira

    2015-01-01

    Full Text Available The aim of this work is to investigate how the spatial variability of soil properties and soil erodibility (K factor were affected by the changes in land use allowed by irrigation with water from a reservoir in a semiarid area. To this, three areas representative of different land uses (agroforestry grassland, Lucerne crop and olive orchard were studied within a 900 ha farm. The interrelationships between variables were analyzed by multivariate techniques and extrapolated using geostatistics. The results confirmed differences between land uses for all properties analyzed, which was explained mainly by the existence of diverse management practices (tillage, fertilization and irrigation, vegetation cover and local soil characteristics. Soil organic matter, clay and nitrogen content decreased significantly, while K factor increased with intensive cultivation. The HJ-biplot methodology was used to represent the variation of soil erodibility properties grouped in land uses. Native grassland was the least correlated with the other land uses. K factor demonstrated high correlation mainly with very fine sand and silt. The maps produced with geostatistics were crucial to understand the current spatial variability in the Alqueva region. Facing the intensification of land-use conversion, a sustainable management is needed to introduce protective measures to control soil erosion.

  4. Soil erosion rates from mixed soil and gravel surfaces in a wind tunnel: A preliminary report

    Energy Technology Data Exchange (ETDEWEB)

    Ligotke, M.W.

    1988-12-01

    Tests of wind erosion were performed in a controlled-environment wind tunnel to support the development of natural-material protective barriers for long-term isolation of radioactive waste. Barrier performance standards currently being developed for internal and external barrier performance are expected to mandate a surface layer that is resistant to wind erosion. The purpose of this study was to initiate a series of tests to determine suitable soil and gravel mixtures for such a barrier and to test worst-case surface layer conditions under the influence of high wind speeds. Six mixed soil and gravel surfaces were prepared, weathered to represent natural wind-blown desert areas, and subjected to controlled wind erosion forces in a wind tunnel. The applied erosive forces, including surface shear forces, were characterized to provide a means of relating wind tunnel results with actual field conditions. Soil particle losses from the surfaces caused by suspension, saltation, and surface creep were monitored by aerosol sample probes and mass balance measurements. 23 refs., 22 figs., 3 tabs.

  5. Profiles and Geotechnical Properties for some Basra Soils

    Directory of Open Access Journals (Sweden)

    Abbas J. Al-Taie

    2015-06-01

    Full Text Available Basra province is known for its logistic location for trading activity and oil industry. By geological point of view, Basra areas are believed to consist mainly of alternation of (clay, silty clay, clayey silt, silt and sand type of soil. Any development of industry in this area should be affected by the occurrence of the clay soil. That is why the investigation to the soil is more than necessary. In this case, a vast testing program was carried out by the author to evaluate the various formations constituting the of some Basra soils. An attempt to characterize and discuss the nature, minerals, engineering behavior and field properties of soil samples extracted from more than one thousand and one hundred boring liner meters of three sites was performed. The average values of various geotechnical design properties are calculated and plotted with depth. A preview of climate, geology, seismicity and earthquakes of the study area was conducted. Finally, the typical soil profiles were prepared.

  6. Influence of the soil genesis on physical and mechanical properties.

    Science.gov (United States)

    Marschalko, Marian; Yilmaz, Işık; Fojtová, Lucie; Kubečka, Karel; Bouchal, Tomáš; Bednárik, Martin

    2013-01-01

    The paper deals with the influence of soil genesis on the physical-mechanical properties. The presented case study was conducted in the region of the Ostrava Basin where there is a varied genetic composition of the Quaternary geological structure on the underlying Neogeneous sediments which are sediments of analogous granulometry but different genesis. In this study, 7827 soil samples of an eolian, fluvial, glacial, and deluvial origin and their laboratory analyses results were used. The study identified different values in certain cases, mostly in coarser-grained foundation soils, such as sandy loam S4 (MS) and clayey sand F4 (CS). The soils of the fluvial origin manifest different values than other genetic types. Next, based on regression analyses, dependence was proved neither on the deposition depth (depth of samples) nor from the point of view of the individual foundation soil classes or the genetic types. The contribution of the paper is to point at the influence of genesis on the foundation soil properties so that engineering geologists and geotechnicians pay more attention to the genesis during engineering-geological and geotechnical investigations.

  7. Robinia pseudoacacia leaves improve soil physical and chemical properties

    Institute of Scientific and Technical Information of China (English)

    Babar; KHAN; Abdukadir; Ablimit; Rashed; MAHMOOD; Muhammad; QASIM

    2010-01-01

    The role of the leaves of Robinia pseudoacacia L., which is widely distributed in the arid lands, on improving soil physical and chemical properties was analyzed at various incubation periods. The incubated soils added with 0, 25, 50 and 75 g Robinia pseudoacacia leaves were tested after consecutive incubation intervals of 6, 8 and 10 months and the different soil parameters were measured. The results showed the increases in organic matter (OM), extractable K, cation exchange capacity (CEC), aggregate stability and water holding capacity, but the decreases in pH value and bulk density after 6 months’ incubation. The gradual decrease in change rates of soil properties indicated less microbial population and organic residual mineralization under acidic conditions, which were resulted from fast decomposition of leaves after the first 6 months incubation. The increases in soil organic matter content, extractable K, CEC, aggregate stability and water holding capacity and the decreases in soil pH and bulk density provide favorable conditions for crop’s growth.

  8. Robinia pseudoacacia leaves improve soil physical and chemical properties

    Institute of Scientific and Technical Information of China (English)

    Babar KHAN; Abdukadir Ablimit; Rashed MAHMOOD; Muhammad QASIM

    2010-01-01

    The role of the leaves of Robinia pseudoacacia L.,which is widely distributed in the arid lands,on improving soil physical and chemical properties was analyzed at various incubation periods.The incubated soils added with 0,25,50 and 75 g Robinia pseudoacacia leaves were tested after consecutive incubation intervals of 6,8 and 10 months and the different soil parameters were measured.The results showed the increases in organic matter (OM),extractable K,cation exchange capacity (CEC),aggregate stability and water holding capacity,but the decreases in pH value and bulk density after 6 months' incubation.The gradual decrease in change rates of soil properties indicated less microbial population and organic residual mineralization under acidic conditions,which were resulted from fast decomposition of leaves after the first 6 months incubation.The increases in soil organic matter content,extractable K,CEC,aggregate stability and water holding capacity and the decreases in soil pH and bulk density provide favorable conditions for crop's growth.

  9. Magnetic Properties of Different-Aged Chernozemic Soils

    Science.gov (United States)

    Fattakhova, Leysan; Shinkarev, Alexandr; Kosareva, Lina; Nourgaliev, Danis; Shinkarev, Aleksey; Kondrashina, Yuliya

    2016-04-01

    We investigated the magnetic properties and degree of mineral weathering in profiles of different-aged chernozemic soils derived from a uniform parent material. In this work, layer samples of virgin leached chernozem and chernozemic soils formed on the mound of archaeological earthy monument were used. The characterization of the magnetic properties was carried out on the data of the magnetometry and differential thermomagnetic analysis. The evaluation of the weathering degree was carried out on a loss on ignition, cation exchange capacity and X-ray phase analysis on the data of the original soil samples and samples of the heavy fraction of minerals. It was found that the magnetic susceptibility enhancement in humus profiles of newly formed chernozemic soils lagged significantly behind the organic matter content enhancement. This phenomenon is associated with differences in kinetic parameters of humus formation and structural and compositional transformation of the parent material. It is not enough time of 800-900 years to form a relatively "mature" magnetic profile. These findings are well consistent with the chemical kinetic model (Boyle et al., 2010) linking the formation of the soils magnetic susceptibility with the weathering of primary Fe silicate minerals. Different-aged chernozemic soils are at the first stage of formation of a magnetic profile when it is occur an active production of secondary ferrimagnetic minerals from Fe2+ released by primary minerals.

  10. Biological Soil Crusts from Coastal Dunes at the Baltic Sea: Cyanobacterial and Algal Biodiversity and Related Soil Properties.

    Science.gov (United States)

    Schulz, Karoline; Mikhailyuk, Tatiana; Dreßler, Mirko; Leinweber, Peter; Karsten, Ulf

    2016-01-01

    Biological soil crusts (BSCs) are known as "ecosystem-engineers" that have important, multifunctional ecological roles in primary production, in nutrient and hydrological cycles, and in stabilization of soils. These communities, however, are almost unstudied in coastal dunes of the temperate zone. Hence, for the first time, the biodiversity of cyanobacterial and algal dominated BSCs collected in five dunes from the southern Baltic Sea coast on the islands Rügen and Usedom (Germany) was investigated in connection with physicochemical soil parameters. The species composition of cyanobacteria and algae was identified with direct determination of crust subsamples, cultural methods, and diatom slides. To investigate the influence of soil properties on species composition, the texture, pH, electrical conductivity, carbonate content, total contents of carbon, nitrogen, phosphorus, and the bioavailable phosphorus-fraction (PO4 (3-)) were analyzed in adjacent BSC-free surface soils at each study site. The data indicate that BSCs in coastal dunes of the southern Baltic Sea represent an ecologically important vegetation form with a surprisingly high site-specific diversity of 19 cyanobacteria, 51 non-diatom algae, and 55 diatoms. All dominant species of the genera Coleofasciculus, Lyngbya, Microcoleus, Nostoc, Hydrocoryne, Leptolyngbya, Klebsormidium, and Lobochlamys are typical aero-terrestrial cyanobacteria and algae, respectively. This first study of coastal sand dunes in the Baltic region provides compelling evidence that here the BSCs were dominated by cyanobacteria, algae, or a mixture of both. Among the physicochemical soil properties, the total phosphorus content of the BSC-free sand was the only factor that significantly influenced the cyanobacterial and algal community structure of BSCs in coastal dunes.

  11. Shallow Subsurface Soil Moisture Dynamics in the Root-Zone and Bulk Soil of Sparsely Vegetated Land Surfaces as Impacted by Near-Surface Atmospheric State

    Science.gov (United States)

    Trautz, A.; Illangasekare, T. H.; Tilton, N.

    2015-12-01

    Soil moisture is a fundamental state variable that provides the water necessary for plant growth and evapotranspiration. Soil moisture has been extensively studied in the context of bare surface soils and root zones. Less attention has focused on the effects of sparse vegetation distributions, such as those typical of agricultural cropland and other natural surface environments, on soil moisture dynamics. The current study explores root zone, bulk soil, and near-surface atmosphere interactions in terms of soil moisture under different distributions of sparse vegetation using multi-scale laboratory experimentation and numerical simulation. This research is driven by the need to advance our fundamental understanding of soil moisture dynamics in the context of improving water conservation and next generation heat and mass transfer numerical models. Experimentation is performed in a two-dimensional 7.3 m long intermediate scale soil tank interfaced with a climate-controlled wind tunnel, both of which are outfitted with current sensor technologies for measuring atmospheric and soil variables. The soil tank is packed so that a sparsely vegetated soil is surrounded by bulk bare soil; the two regions are separated by porous membranes to isolate the root zone from the bulk soil. Results show that in the absence of vegetation, evaporation rates vary along the soil tank in response to longitudinal changes in humidity; soil dries fastest upstream where evaporation rates are highest. In the presence of vegetation, soil moisture in the bulk soil closest to a vegetated region decreases more rapidly than the bulk soil farther away. Evapotranspiration rates in this region are also higher than the bulk soil region. This study is the first step towards the development of more generalized models that account for non-uniformly distributed vegetation and land surfaces exhibiting micro-topology.

  12. Constitutive Soil Properties for Mason Sand and Kennedy Space Center

    Science.gov (United States)

    Thomas, Michael A.; Chitty, Daniel E.

    2011-01-01

    Accurate soil models are required for numerical simulations of land landings for the Orion Crew Exploration Vehicle (CEV). This report provides constitutive material models for two soil conditions at Kennedy Space Center (KSC) and four conditions of Mason Sand. The Mason Sand is the test sand for LaRC s drop tests and swing tests of the Orion. The soil models are based on mechanical and compressive behavior observed during geotechnical laboratory testing of remolded soil samples. The test specimens were reconstituted to measured in situ density and moisture content. Tests included: triaxial compression, hydrostatic compression, and uniaxial strain. A fit to the triaxial test results defines the strength envelope. Hydrostatic and uniaxial tests define the compressibility. The constitutive properties are presented in the format of LSDYNA Material Model 5: Soil and Foam. However, the laboratory test data provided can be used to construct other material models. The soil models are intended to be specific to the soil conditions they were tested at. The two KSC models represent two conditions at KSC: low density dry sand and high density in-situ moisture sand. The Mason Sand model was tested at four conditions which encompass measured conditions at LaRC s drop test site.

  13. Soil hydraulic properties near saturation, an improved conductivity model

    DEFF Research Database (Denmark)

    Børgesen, Christen Duus; Jacobsen, Ole Hørbye; Hansen, Søren;

    2006-01-01

    The hydraulic properties near saturation can change dramatically due to the presence of macropores that are usually difficult to handle in traditional pore size models. The purpose of this study is to establish a data set on hydraulic conductivity near saturation, test the predictive capability...... of commonly used hydraulic conductivity models and give suggestions for improved models. Water retention and near saturated and saturated hydraulic conductivity were measured for a variety of 81 top and subsoils. The hydraulic conductivity models by van Genuchten [van Genuchten, 1980. A closed-form equation...... for predicting the hydraulic conductivity of unsaturated soils. Soil Sci. Soc. Am. J. 44, 892–898.] (vGM) and Brooks and Corey, modified by Jarvis [Jarvis, 1991. MACRO—A Model of Water Movement and Solute Transport in Macroporous Soils. Swedish University of Agricultural Sciences. Department of Soil Sciences...

  14. Study of the properties of soil in Kirkuk, IRAQ

    Directory of Open Access Journals (Sweden)

    Ali H. Taqi

    2016-07-01

    Full Text Available The properties of soil in Kirkuk city (IRAQ are studied using gamma and neutron radiation. Ten locations are selected for the process of making field measurements on soils at 40–50 cm depth levels then the samples were collected to be studied in the laboratory also. In the field, we measured the density and moisture contents of soils. The laboratory measurement has been performed to obtain mass attenuation coefficients, using gamma spectrometer contains shielded NaI (Tl detector at the energies of 59.5, 356.5, 662, 1173 and 1332 keV. The obtained results were presented and discussed. The study has practical importance to know the nature of the soil in the oil and agricultural city Kirkuk.

  15. Soil properties and preferential solute transport at the field scale

    DEFF Research Database (Denmark)

    Koestel, J K; Minh, Luong Nhat; Nørgaard, Trine

    An important fraction of water flow and solute transport through soil takes place through preferential flow paths. Although this had been already observed in the nineteenth century, it had been forgotten by the scientific community until it was rediscovered during the 1970s. The awareness...... of the relevance of preferential flow was broadly re-established in the community by the early 1990s. However, since then, the notion remains widespread among soil scientists that the occurrence and strength of preferential flow cannot be predicted from measurable proxy variables such as soil properties or land...... management practices (e.g. Beven, K., 1991, modeling preferential flow - an uncertain future, Preferential Flow, 1-11). In our study, we present evidence that disproves this notion. We evaluated breakthrough curve experiments under a constant irrigation rate of 1 cm/h conducted on 65 soil columns (20 cm...

  16. SURFACE RUNOFF AND SOIL ORGANIC MATTER AVAILABILITY IN BAMBOO-BASED AGROFORESTRY IN LOMBOK TIMUR DISTRICT

    Directory of Open Access Journals (Sweden)

    Cecep Handoko

    2012-12-01

    Full Text Available Bamboo-based agroforestry is suitable for soils which are poor in nutrient. The characteristics of bamboo and the rapid closure of  its canopy improve soil cover, soil nutrient availability and soil moisture  content,  and  prevent  erosion  by reducing surface runoff. The  research was aimed at determining the factors that influenced surface runoff and the availability of soil organic matter (SOM in the bamboo-based agroforestry in East Lombok. Research was done from March 2010 to March 2011 in Lenek Daya village, Aikmel sub-district, East Lombok district. The research plots were located on slopes of 0-15o, 30-45o, and 45-65o; with bamboo canopy closures of 0-25%, 25-50%, 50-75%, and over 75%. The research involving 12 plots, each in 4 x 12 m size. Measurements included surface runoff, bamboo canopy closure, weeds and bamboo leaves litter weight, rainfall depth and duration, dissolved sediment, and soil physical and chemical properties as well as SOM. Correlation and multiple linear regression tests were used in data analysis. The results of the regression tests showed a change in surface runoff which was influenced by changes in bamboo canopy closure, rain duration, rain intensity and soil sand fraction, each by -0.019, 0.418, 0.049 and -0.065 respectively. Rain duration was the highest influencing variable, whereas bamboo canopy closure significantly decreased surface runoff. Bamboo canopy closure had no correlation with the increase of SOM. But, the increase of SOM had correlation with the increase of  soil cation exchange capacity (CEC. The positive impact of  bamboo canopy closure  on  Regosol soil fertility in  bamboo-based  agroforestry land  was determined  by  land management intensity which could increase the availability of SOM and decrease phosphorus element loss due to leaching of nutrient.

  17. High Resolution Imaging Spectroscopy for Characterizing Soil Properties over Large Areas

    Science.gov (United States)

    Dutta, D.; Kumar, P.

    2014-12-01

    Quantitative mapping of high resolution surface soil texture (percentage sand, silt and clay), soil organic matter and chemical constituents are important for understanding infiltration, runoff and other surficial hydrologic processes at different scales. The Visible Near Infrared Analysis (VNIRA) method, which is a combination of imaging spectroscopy and laboratory chemical analysis with an underlying statistical model, has been established for the quantification of soil properties from imaging spectrometer data. In this study we characterize the feasibility of quantifying soil properties over large areas with the aim that these methods may be extended to space-borne sensors such as HyspIRI. Hyperspectral Infrared Imager (HyspIRI) is a space-borne NASA mission concept having 10nm contiguous bands in the VSWIR region (380nm to 2500nm) of the electromagnetic spectra. High resolution (7.6m) Airborne Visible Infrared Imaging Spectrometer (AVIRIS) data collected by NASA immediately after the massive 2011 Mississippi River floods at the Birds Point New Madrid (BPNM) floodway, coupled with in situ samples obtained at the time of the flight, is used to generate HyspIRI like data at 60m resolution. The VNIRA method is applied in a data-mining framework for quantification of the different soil textural properties and chemical constituents. The empirical models are further used for creating quantitative maps of the soil properties for the entire BPNM floodway. These maps are compared with the fine resolution AVIRIS maps of the same area for the different legacy landscape features and spatial correlations with the underlying topography immediately disturbed by the flooding event. The scales of variation in the soil constituents captured by the fine resolution data are also compared to the scales of variation captured by coarser resolution data. This study further explores the issues of applicability, challenges (such as the sensitivity of NDVI from mixed neighborhood pixels

  18. Surface Properties of PEMFC Gas Diffusion Layers

    Energy Technology Data Exchange (ETDEWEB)

    WoodIII, David L [Los Alamos National Laboratory (LANL); Rulison, Christopher [Augustine Scientific; Borup, Rodney [Los Alamos National Laboratory (LANL)

    2010-01-01

    The wetting properties of PEMFC Gas Diffusion Layers (GDLs) were quantified by surface characterization measurements and modeling of material properties. Single-fiber contact-angle and surface energy (both Zisman and Owens-Wendt) data of a wide spectrum of GDL types is presented to delineate the effects of hydrophobic post-processing treatments. Modeling of the basic sessile-drop contact angle demonstrates that this value only gives a fraction of the total picture of interfacial wetting physics. Polar forces are shown to contribute 10-20 less than dispersive forces to the composite wetting of GDLs. Internal water contact angles obtained from Owens-Wendt analysis were measured at 13-19 higher than their single-fiber counterparts. An inverse relationship was found between internal contact angle and both Owens-Wendt surface energy and % polarity of the GDL. The most sophisticated PEMFC mathematical models use either experimentally measured capillary pressures or the standard Young-Laplace capillary-pressure equation. Based on the results of the Owens-Wendt analysis, an advancement to the Young-Laplace equation is proposed for use in these mathematical models, which utilizes only solid surface energies and fractional surface coverage of fluoropolymer. Capillary constants for the spectrum of analyzed GDLs are presented for the same purpose.

  19. Welcome to Surface Topography: Metrology and Properties

    Science.gov (United States)

    Leach, Richard

    2013-11-01

    I am delighted to welcome readers to this inaugural issue of Surface Topography: Metrology and Properties (STMP). In these days of citation indexes and academic reviews, it is a tough, and maybe a brave, job to start a new journal. But the subject area has never been more active and we are seeing genuine breakthroughs in the use of surfaces to control functional performance. Most manufactured parts rely on some form of control of their surface characteristics. The surface is usually defined as that feature on a component or device, which interacts with either the environment in which it is housed (or in which the device operates), or with another surface. The surface topography and material characteristics of a part can affect how fluids interact with it, how the part looks and feels and how two bearing parts will slide together. The need to control, and hence measure, surface features is becoming increasingly important as we move into a miniaturized world. Surface features can become the dominant functional features of a part and may become large in comparison to the overall size of an object. Research into surface texture measurement and characterization has been carried out for over a century and is now more active than ever, especially as new areal surface texture specification standards begin to be introduced. The range of disciplines for which the function of a surface relates to its topography is very diverse; from metal sheet manufacturing to art restoration, from plastic electronics to forensics. Until now, there has been no obvious publishing venue to bring together all these applications with the underlying research and theory, or to unite those working in academia with engineering and industry. Hence the creation of Surface Topography: Metrology and Properties . STMP will publish the best work being done across this broad discipline in one journal, helping researchers to share common themes and highlighting and promoting the extraordinary benefits this

  20. SOIL PROPERTIES DYNAMICS INDUCED BY PASSAGE OF FIRE DURING AGRICULTURAL BURNING

    Directory of Open Access Journals (Sweden)

    Edem I. Dennis

    2013-05-01

    Full Text Available Characteristics of an ecosystem are altered both as sudden modifications induced by the passage of the fire and the delayed changes derived from the simultaneous modifications of various soil physical and chemical parameters. Effects of fire on soil properties was performed in experimental plots, whose fuel amount was altered in order to obtain different heating intensities with the aim of determining changes in the soil physico-chemical parameters at varying heating temperatures. The research was conducted in a continuous cropped arable experimental plots located at the University of Uyo Teaching and Research Farm (UUTRF, Use-Offot, Uyo, Nigeria for four growing seasons, between March, 2010 to October, 2011. Core and bulk samples from the burned and adjacent unburned plots (control were collected for physico-chemical analysis using standard procedures. These induced temperatures were highly variable on the soil surface. Temperature differences significantly (P < 0.05 affected sand, total nitrogen, organic carbon and pH contents of the soils positively (r = 0.518, 0.478, 0.582, 0.595 respectively, whereas a reduction in the soil temperature increased the concentrations of clay, 1mm, 0.05mm and 0.25 mm stable soil aggregates in the soil (r = -0.619, -0.578, -0.780, -0.526 respectively after burning. Exchange acidity increased to 5.12 cmolkg-1 at 400C from 0.80 cmolkg-1 at initial temperature of 250C at the surface soil. Though aggregates formation was significantly higher (P = 0.05 after burning than the control soil locations, this soil will easily be distressed with the least application of force. The pH decreased to 5.4 at higher temperatures following burning before ashes mineralized. However, both organic matter and ECEC increased at increasing soil temperature. Potassium content remained surprisingly constant as the soil temperature increased. Despite the merits of quick release of occluded nutrients, heating temperatures of slash

  1. Soil physical and hydrological properties under three biofuel crops in Ohio

    Energy Technology Data Exchange (ETDEWEB)

    Bonin, Catherine; Lal, Rattan [The Ohio State Univ., School of Environment and Natural Resources, Carbon Management and Sequestration Center, Columbus, OH (United States); Schmitz, Matthias [Rheinische Friedrich/Wilhelms-Universitaet Bonn, Steinmann Institut fuer Geologie, Mineralogie und Palaeontologie, Bonn (Germany); Wullschleger, S. [The Oakridge National Lab., Oakridge, TN (United States)

    2012-10-15

    While biofuel crops are widely studied and compared for their energy and carbon footprints, less is known about their effects on other soil properties, particularly hydrologic characteristics. Soils under three biofuel crops, corn (Zea mays), switchgrass (Panicum virgatum), and willow (Salix spp.), were analyzed seven years after establishment to assess the effects on soil bulk density ({rho}{sub b}), penetration resistance (PR), water-holding capacity, and infiltration characteristics. The PR was the highest under corn, along with the lowest associated water content, while PR was 50-60 % lower under switchgrass. In accordance with PR data, surface (0-10 cm) bulk density also tended to be lower under switchgrass. Both water infiltration rates and cumulative infiltration amounts varied widely among and within the three crops. Because the Philip model did not fit the data, results were analyzed using the Kostiakov model instead. Switchgrass plots had an average cumulative infiltration of 69 cm over 3 hours with a constant infiltration rate of 0.28 cm min{sup -1}, compared with 37 cm and 0.11 cm min{sup -1} for corn, and 26 cm and 0.06 cm min{sup -1} for willow, respectively. Results suggest that significant changes in soil physical and hydrologic properties may require more time to develop. Soils under switchgrass may have lower surface bulk density, higher field water capacity, and a more rapid water infiltration rate than those under corn or willow.

  2. Soil physical and hydrological properties under three biofuel crops in Ohio

    Energy Technology Data Exchange (ETDEWEB)

    Bonin, Catherine [Ohio State University; Lal, Dr. Rattan [Ohio State University; Schmitz, Matthias [Rheinsche Friedrich/Wilhelms Universitaet Boon; Wullschleger, Stan D [ORNL

    2012-01-01

    While biofuel crops are widely studied and compared for their energy and carbon footprints, less is known about their effects on other soil properties, particularly hydrologic characteristics. Soils under three biofuel crops, corn (Zea mays), switchgrass (Panicum virgatum), and willow (Salix spp.), were analyzed seven years after establishment to assess the effects on soil bulk density ({rho}{sub b}), penetration resistance (PR), water-holding capacity, and infiltration characteristics. The PR was the highest under corn, along with the lowest associated water content, while PR was 50-60% lower under switchgrass. In accordance with PR data, surface (0-10 cm) bulk density also tended to be lower under switchgrass. Both water infiltration rates and cumulative infiltration amounts varied widely among and within the three crops. Because the Philip model did not fit the data, results were analyzed using the Kostiakov model instead. Switchgrass plots had an average cumulative infiltration of 69 cm over 3 hours with a constant infiltration rate of 0.28 cm min{sup -1}, compared with 37 cm and 0.11 cm min{sup -1} for corn, and 26 cm and 0.06 cm min{sup -1} for willow, respectively. Results suggest that significant changes in soil physical and hydrologic properties may require more time to develop. Soils under switchgrass may have lower surface bulk density, higher field water capacity, and a more rapid water infiltration rate than those under corn or willow.

  3. RF and Surface Properties of Superconducting Samples

    CERN Document Server

    Junginger, T; Weingarten, W; Welsch, C

    2011-01-01

    At CERN a compact Quadrupole Resonator has been developed for the RF characterization of superconducting samples at different frequencies. In this paper, results from measurements on bulk niobium and niobium filmon copper substrate samples are presented. We show how different contributions to the surface resistance depend on temperature, applied RF magnetic field and frequency. Furthermore, measurements of the maximum RF magnetic field as a function of temperature and frequency in pulsed and CW operation are presented. The study is accompanied by measurements of the surface properties of the samples by various techniques.

  4. Geochemical and physical properties of wetland soils at the Savannah River site

    Energy Technology Data Exchange (ETDEWEB)

    Dixon, K.L; Rogers, V.A.; Conner, S.P.; Cummings, C.L.; Gladden, J.B.; Weber, J.M.

    1996-05-01

    The Savannah River Site (SRS), located in Aiken, Allendale, and Barnwell Counties, South Carolina, is a nuclear production facility operated for the U.S. Department of Energy (DOE) by Westinghouse Savannah River Company (WSRC). To facilitate future human health and ecological risk assessments, treatability studies, remedial investigations, and feasibility studies for its wetland areas, SRS needs a database of background geochemical and physical properties of wetland soils. These data are needed for comparison to data collected from wetland soils that may have been affected by SRS operations. SRS contains 36,000 acres of wetlands and an additional 5,000 acres of bottom land soils subject to flooding. Recent studies of wetland soils near various waste units at SRS show that some wetlands have been impacted by releases of contaminants resulting from SRS operations (WSRC, 1992). Waste waters originating from the operations facilities typically have been discharged into seepage basins located in upland soils, direct discharge of waste water to wetland areas has been minimal. This suggests that impacted wetland areas have been affected indirectly as a result of transport mechanisms such as surface runoff, groundwater seeps, fluvial or sediment transport, and leaching. Looney et al. (1990) conducted a study to characterize the geochemical and physical properties of upland soils and shallow sediments on the SRS. A primary objective of the upland study was to collect the data needed to assess the qualitative and quantitative impacts of SRS operations on the environment. By comparing the upland soils data to data collected from waste units located in similar soils, SRS impacts could be assessed. The data were also intended to aid in selection of remediation alternatives. Because waste units at SRS have historically been located in upland areas, wetland soils were not sampled. (Abstract Truncated)

  5. Impacts of thinning of a Mediterranean oak forest on soil properties influencing water infiltration

    Directory of Open Access Journals (Sweden)

    Di Prima Simone

    2017-09-01

    Full Text Available In Mediterranean ecosystems, special attention needs to be paid to forest–water relationships due to water scarcity. In this context, Adaptive Forest Management (AFM has the objective to establish how forest resources have to be managed with regards to the efficient use of water, which needs maintaining healthy soil properties even after disturbance. The main objective of this investigation was to understand the effect of one of the AFM methods, namely forest thinning, on soil hydraulic properties. At this aim, soil hydraulic characterization was performed on two contiguous Mediterranean oak forest plots, one of them thinned to reduce the forest density from 861 to 414 tree per ha. Three years after the intervention, thinning had not affected soil water permeability of the studied plots. Both ponding and tension infiltration runs yielded not significantly different saturated, Ks, and unsaturated, K−20, hydraulic conductivity values at the thinned and control plots. Therefore, thinning had no an adverse effect on vertical water fluxes at the soil surface. Mean Ks values estimated with the ponded ring infiltrometer were two orders of magnitude higher than K−20 values estimated with the minidisk infiltrometer, revealing probably soil structure with macropores and fractures. The input of hydrophobic organic matter, as a consequence of the addition of plant residues after the thinning treatment, resulted in slight differences in terms of both water drop penetration time, WDPT, and the index of water repellency, R, between thinned and control plots. Soil water repellency only affected unsaturated soil hydraulic conductivity measurements. Moreover, K−20 values showed a negative correlation with both WDPT and R, whereas Ks values did not, revealing that the soil hydrophobic behavior has no impact on saturated hydraulic conductivity.

  6. Microwave processing of lunar soil for supporting longer-term surface exploration of the Moon

    Science.gov (United States)

    Srivastava, V.; Lim, S.; Anand, M.

    2016-11-01

    The future of human space exploration will inevitably involve longer-term stays and possibly permanent settlement on the surfaces of other planetary bodies. It will, therefore, be advantageous or perhaps even necessary to utilise local resources for building an infrastructure for human habitation on the destination planetary body. In this context human lunar exploration is the next obvious step. Lunar soil is regarded as an ideal feedstock for lunar construction materials. However, significant gaps remain in our knowledge and understanding of certain chemical and physical properties of lunar soil, which need to be better understood in order to develop appropriate construction techniques and materials for lunar applications. This article reviews our current understanding of the dielectric behaviour of lunar soil in the microwave spectrum, which is increasingly recognised as an important topic of research in the Space Architecture field. Although the coupling between the lunar soil and microwave energy is already recognised, considerable challenges must be overcome before microwave processing could be used as a main fabrication method for producing robust structures on the Moon. We also review the existing literature on the microwave processing of lunar soil and identify three key research areas where future efforts are needed to make significant advances in understanding the potential of microwave processing of lunar soil for construction purposes.

  7. Thermodynamic Properties of NH4+ Fixation in Manured Loess Soil in Shaanxi Province,China

    Institute of Scientific and Technical Information of China (English)

    FANXIAOLIN; JUANGTZOCHUAN; 等

    1997-01-01

    Some thermodynamic properties of NH4+ fixation by loess soil in plowing and clay layers are discussed.The results indicate that the four ion adsorption equations commonly used can describe the properties of NH4+ fixation in these soils under constant temperature.Among the four adsorption equations,the single-surface Langmuir equation is the best.When the concentration of NH4Cl solution is 10-1 mol below,the Freundlich equation can be used. The changes of apparent standard free energy(△G°),enthalpy(△H°)and entropy(△S°)ilustrate that NH4+ fixation in soil is an endothermic adsorption and spontaneous reaction,and the process can be enhanced by a higher temperature and clay content in soil. The"proper value of NH4+ fixation by soil(K1×qm)imcreased with increasing clay content and temper-ature.The heat of NH4+ fixation in soil(Qm) confirms the conclusions made in this paper.

  8. Litter decay controlled by temperature, not soil properties, affecting future soil carbon.

    Science.gov (United States)

    Gregorich, Edward G; Janzen, Henry; Ellert, Benjamin H; Helgason, Bobbi L; Qian, Budong; Zebarth, Bernie J; Angers, Denis A; Beyaert, Ronald P; Drury, Craig F; Duguid, Scott D; May, William E; McConkey, Brian G; Dyck, Miles F

    2017-04-01

    Widespread global changes, including rising atmospheric CO2 concentrations, climate warming and loss of biodiversity, are predicted for this century; all of these will affect terrestrial ecosystem processes like plant litter decomposition. Conversely, increased plant litter decomposition can have potential carbon-cycle feedbacks on atmospheric CO2 levels, climate warming and biodiversity. But predicting litter decomposition is difficult because of many interacting factors related to the chemical, physical and biological properties of soil, as well as to climate and agricultural management practices. We applied (13) C-labelled plant litter to soil at ten sites spanning a 3500-km transect across the agricultural regions of Canada and measured its decomposition over five years. Despite large differences in soil type and climatic conditions, we found that the kinetics of litter decomposition were similar once the effect of temperature had been removed, indicating no measurable effect of soil properties. A two-pool exponential decay model expressing undecomposed carbon simply as a function of thermal time accurately described kinetics of decomposition. (R(2)  = 0.94; RMSE = 0.0508). Soil properties such as texture, cation exchange capacity, pH and moisture, although very different among sites, had minimal discernible influence on decomposition kinetics. Using this kinetic model under different climate change scenarios, we projected that the time required to decompose 50% of the litter (i.e. the labile fractions) would be reduced by 1-4 months, whereas time required to decompose 90% of the litter (including recalcitrant fractions) would be reduced by 1 year in cooler sites to as much as 2 years in warmer sites. These findings confirm quantitatively the sensitivity of litter decomposition to temperature increases and demonstrate how climate change may constrain future soil carbon storage, an effect apparently not influenced by soil properties.

  9. ENZYME ACTIVITIES OF PADDY SOILS AND RELATIONSHIPS WITH THE SOIL PROPERTIES

    Directory of Open Access Journals (Sweden)

    Rıdvan KIZILKAYA

    1998-03-01

    Full Text Available This study was carried out to determine the effect of soil properties on enzyme activities of paddy soils, the sample of which were taken from Üçpınar, Harız, Doğancı, Kaygusuz, Emenli, Sarıköy and Gelemenağarı villages where rice cultivation is an intensive agricultural system. In this study, soil properties having effects on urease, phosphatase, ß-glucosidase and catalase enzyme activities were setforth. Urease enzyme activities of soil samples varied from 24.12 to 39.03 mg N 100 g dry soil -1 . Significant correlations were determined between urease enzyme activities and organic matter (r = 0.89**, extractable Mn (r = 0.74**, exchangable K (r = 0.73** and total P content of soil (r = 0.81*. Acid phosphatase enzyme activity varied between 3.00-17.44 mg phenol 100 g dry soil -1 , alkaline phosphatase enzyme activity between 12.00-25.53 mg phenol 100 g dry soil-1 . Exchangable Mg (r = 0.71* and extractable Cu (r = 0.74* were found to have positive effect on acid phosphatase enzyme activity and pH (r = 0.73*, exchangable Ca (r = 0.74*, exchangable Mg (r = 0.71*, exchangable total basic cations (r = 0.79* and extractable Cu (r = 0.70* had positive effects on alkaline phosphatase enzyme activity, whereas total P (r = - 0.84** affected the activity negatively. ß-glucosidase enzyme activity was measured to vary between 1.12-3.64 mg salingen 100 g dry soil -1 . It was also observed that extractable Zn content of soil samples (r = - 0.97** had negative effect on ß-glucosidase activity, wheras total exchangable acidic cations (r = 0.70* affected the activity positively. Catalase enzyme activities of soils changed between 5.25 - 9.00 mg O2 5 g dry soil -1 . Significant correlations were found between catalase activities and fraction of soils and extractable Fe content. Positive correlations, however, were determined between catalase activities and clay fraction (r = 0.82* and salt content (r = 0.83** of samples.

  10. Effects of Biochar and Lime on Soil Physicochemical Properties and Tobacco Seedling Growth in Red Soil

    Directory of Open Access Journals (Sweden)

    ZHU Pan

    2015-12-01

    Full Text Available Red soil, mainly found in the southern China, is developed in a warm, moist climate. The main property of the soils is strong acidity, aluminum toxicity, and low available nutrients. In this study, different effects of biochar and lime on soil physicochemical properties and tobacco growth were determined in red soil, so as to provide a scientific foundation for soil improvement tobacco field. A pot experiment was designed and conducted at four biochar levels(0, 0.5%, 1%, 2% and normal lime level (0.3% to study effects of two different soil amendments on red soil pH, exchangeable aluminum(Exc-Al and exchangeable manganese(Exc-Mn, available nutrients and organic carbon (SOC. Meanwhile, agronomic traits, biomass and leaves elements of tobacco were also tested. Results showed that the agronomic characters and biomass of tobacco seedling had changed effectively after biochar or lime was added. Under 0.5%, 1% biochar treatment, the content of nitrogen(N, phosphorus(P, potassium(K, calcium(Ca and magnesium(Mg in tobacco leaves substantially raised. However, when 2% biochar was applied, leaves N content declined by 9.3%. Compared with the control, leaves N, P and Ca content increased observably in the lime treatment. However, its K and Mg content decreased by 9.0% and 13.3% respectively. Alkaline nitrogen(SAN, available phosphorus (SAP, available potassium (SAK, and exchangeable calcium (Exc-Ca and exchangeable magnesium (Exc-Mg were improved obviously in soil applied with biochar. Only the content of Exc-Ca was significantly increased in lime treatment. In addition, it was beneficial to improve soil pH and reduce soil Exc-Al when biochar or lime had been used. Thus, both biochar and lime are propitious to increase soil pH value, lessen soil Exc-Al content, and improve the growth of tobacco seedling. Furthermore, biochar application also can raise the content of available nutrient and SOC in red soil.

  11. Relations between soil hydraulic properties and burn severity

    NARCIS (Netherlands)

    Moody, J.A.; Ebel, B.A.; Stoof, C.R.; Nyman, P.; Martin, D.A.; McKinley, R.

    2016-01-01

    Wildfire can affect soil hydraulic properties, often resulting in reduced infiltration. The magnitude of change in infiltration varies depending on the burn severity. Quantitative approaches to link burn severity with changes in infiltration are lacking. This study uses controlled laboratory measure

  12. Analysis of the relationship between rusty root incidences and soil properties in Panax ginseng

    Science.gov (United States)

    Wang, Q. X.; Xu, C. L.; Sun, H.; Ma, L.; Li, L.; Zhang, D. D.; Zhang, Y. Y.

    2016-08-01

    Rusty root is a serious problem in ginseng cultivation that limits the production and quality of ginseng worldwide. The Changbai Mountains are the most famous area for ginseng cultivation in China. To clarify the relationship between rusty root and soil characteristics, physico-chemical properties and enzymatic activities of soil collected from five different fields in the Changbai Mountains were analyzed and a controlled experiment carried out by increasing the concentration of Fe (II). Soil bulk density, moisture, total iron (Fe) and total manganese (Mn) concentrations and polyphenol oxidase (PPO) activity were significantly higher in rusty root than healthy root groups (two-sample test, Prise to ginseng rusty root. Fe (III) reduction and Fe (II) oxidation could be important in increasing the incidence of rusty root. Soil moisture and bulk density of non-rhizosphere soil not attached to the root surface, and pH, N and PPO content of rhizosphere soils attached to the root surface were heavily involved in the reduction, oxidation and sequestration of metal ions.

  13. Spatial Variability Some Physical and Chemical Prpperties Soil surface In Dasht-e-Tabriz Different Landforms

    Science.gov (United States)

    Foroughifar, Hamed; Asghar Jafarzadeh, Ali; Torabi, Hosien; Aliasgharzad, Naser; Toomanian, Norair

    2010-05-01

    Spatial distribution of soil properties at the field and watershed scale(region scale) affect yield potential, hydrologic responses , and transport of herbicides and No3 to surface or groundwater.The present study aim was to evaluate some physical and chemical properties spatial variability and frequency distribution within and between landforms of Dash-e-Tabriz in the northwest of Iran.For this evaluation 98 samples from soils surface of layer according to grid sampling design and with 500-1000 meters distance based on soils variability were selected and analysed.Landforms were hill, piedmont plain, plain, river alluvial plain and lowland.The study of soil variables frequency distribution showed that Bd, CEC, Caco3, pH,clay and silt follow normal distribution ,which to study their variation one can use parametric statistical method.Variables such as MWD, N(total), SAR, EC, P(available) and sand showed log-normal distribution,that for their variation study,should first be transformed to a logarithmic scale.The variables frequency distribution increase within landforms,which in lowland, hill, and river alluvial plain they showed normal distribution and only EC in piedmont plain and sand, OC and N(total) in plain had log-normal distributions.The results indicate significantly differences of soil properties distribution among landforms,which clay ,pH, EC ,SAR and MWD, CEC, Bd, N(total), OC, P(available), sand, silt were strongly and moderately spatial dependent respectively and Caco3 had no spatial dependence and it is following nugget model.These results indicate that strong spatial dependence due to the effects of intrinsic factors such as parent material, relief and soil types. Also soil properties variations result from variation in depositional environments and or differences in pedogenic or hydrologic processes for different landform positions,and so it can be affected by the flood irrigation,fertilizeir addition,high watertable level or agriculture practices

  14. Actual evaporation estimation from infrared measurement of soil surface temperature

    Directory of Open Access Journals (Sweden)

    Davide Pognant

    2013-09-01

    Full Text Available Within the hydrological cycle, actual evaporation represents the second most important process in terms of volumes of water transported, second only to the precipitation phenomena. Several methods for the estimation of the Ea were proposed by researchers in scientific literature, but the estimation of the Ea from potential evapotranspiration often requires the knowledge of hard-to-find parameters (e.g.: vegetation morphology, vegetation cover, interception of rainfall by the canopy, evaporation from the canopy surface and uptake of water by plant roots and many existing database are characterized by missing or incomplete information that leads to a rough estimation of the actual evaporation amount. Starting from the above considerations, the aim of this study is to develop and validate a method for the estimation of the Ea based on two steps: i the potential evaporation estimation by using the meteorological data (i.e. Penman-Monteith; ii application of a correction factor based on the infrared soil surface temperature measurements. The dataset used in this study were collected during two measurement campaigns conducted both in a plain testing site (Grugliasco, Italy, and in a mountain South-East facing slope (Cogne, Italy. During those periods, hourly measurement of air temperature, wind speed, infrared surface temperature, soil heat flux, and soil water content were collected. Results from the dataset collected in the two testing sites show a good agreement between the proposed method and reference methods used for the Ea estimation.

  15. Effects of Rocket Exhaust on Lunar Soil Reflectance Properties

    Science.gov (United States)

    Clegg, R. N.; Jolliff, B. L.; Robinson, M. S.; Hapke, B. W.; Plescia, J. B.

    2012-12-01

    areas; this magnitude is the same, within uncertainty, for all sites, indicating a common process or combination of processes causing differences in reflectance properties of the regolith. Phase-ratio images and photometric data collected over a range of illumination geometries show that a greater separation in reflectance occurs between the HR-BZs and undisturbed areas with increasing phase angle and indicate that the HR-BZs are less backscattering than undisturbed areas. As working hypotheses, we consider the following possibilities to explain BZ reflectance phenomena: change in macroscopic roughness, microscopic modification of surface structure, redistribution of fines (excavation from LR-BZ and deposition in HR-BZ), change in compaction, contamination from fuel, and modification of maturity. The LR-BZ is affected by macroscopic disruption of the surface and increased shadowing. We infer that HR-BZ reflectance has been affected by scouring from particles entrained by exhaust gases with low-angle trajectories. Entrained particles with trajectories greater than a few degrees relative to horizontal travel well beyond the BZ boundary and do not contribute to BZ reflectance variations. Regolith particle interactions with surface soil within HR-BZs may destroy fine-scale surface structure (e.g., "fairy-castle") and decrease macroscopic roughness, contributing to a decrease in backscattering character within the HR-BZ.

  16. Quicklime-induced changes of soil properties: Implications for enhanced remediation of volatile chlorinated hydrocarbon contaminated soils via mechanical soil aeration.

    Science.gov (United States)

    Ma, Yan; Dong, Binbin; He, Xiaosong; Shi, Yi; Xu, Mingyue; He, Xuwen; Du, Xiaoming; Li, Fasheng

    2017-04-01

    Mechanical soil aeration is used for soil remediation at sites contaminated by volatile organic compounds. However, the effectiveness of the method is limited by low soil temperature, high soil moisture, and high soil viscosity. Combined with mechanical soil aeration, quicklime has a practical application value related to reinforcement remediation and to its action in the remediation of soil contaminated with volatile organic compounds. In this study, the target pollutant was trichloroethylene, which is a volatile chlorinated hydrocarbon pollutant commonly found in contaminated soils. A restoration experiment was carried out, using a set of mechanical soil-aeration simulation tests, by adding quicklime (mass ratios of 3, 10, and 20%) to the contaminated soil. The results clearly indicate that quicklime changed the physical properties of the soil, which affected the environmental behaviour of trichloroethylene in the soil. The addition of CaO increased soil temperature and reduced soil moisture to improve the mass transfer of trichloroethylene. In addition, it improved the macroporous cumulative pore volume and average pore size, which increased soil permeability. As soil pH increased, the clay mineral content in the soils decreased, the cation exchange capacity and the redox potential decreased, and the removal of trichloroethylene from the soil was enhanced to a certain extent. After the addition of quicklime, the functional group COO of soil organic matter could interact with calcium ions, which increased soil polarity and promoted the removal of trichloroethylene. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Studying soil properties using visible and near infrared spectral analysis

    Science.gov (United States)

    Moretti, S.; Garfagnoli, F.; Innocenti, L.; Chiarantini, L.

    2009-04-01

    This research is carried out inside the DIGISOIL Project, whose purposes are the integration and improvement of in situ and proximal measurement technologies, for the assessment of soil properties and soil degradation indicators, going form the sensing technologies to their integration and their application in digital soil mapping. The study area is located in the Virginio river basin, about 30 km south of Firenze, in the Chianti area, where soils with agricultural suitability have a high economic value connected to the production of internationally famous wines and olive oils. The most common soil threats, such as erosion and landslide, may determine huge economic losses, which must be considered in farming management practices. This basin has a length of about 23 km for a basin area of around 60,3 Km2. Geological formations outcropping in the area are Pliocene to Pleistocene marine and lacustrine sediments in beds with almost horizontal bedding. Vineyards, olive groves and annual crops are the main types of land use. A typical Mediterranean climate prevails with a dry summer followed by intense and sometimes prolonged rainfall in autumn, decreasing in winter. In this study, three types of VNIR and SWIR techniques, operating at different scales and in different environments (laboratory spectroscopy, portable field spectroscopy) are integrated to rapidly quantify various soil characteristics, in order to acquire data for assessing the risk of occurrence for typically agricultural practice-related soil threats (swelling, compaction, erosion, landslides, organic matter decline, ect.) and to collect ground data in order to build up a spectral library to be used in image analysis from air-borne and satellite sensors. Difficulties encountered in imaging spectroscopy, such as influence of measurements conditions, atmospheric attenuation, scene dependency and sampling representation are investigated and mathematical pre-treatments, using proper algorithms, are applied and

  18. Operational assimilation of ASCAT surface soil wetness at the Met Office

    Directory of Open Access Journals (Sweden)

    I. Dharssi

    2011-04-01

    Full Text Available Currently, no extensive global soil moisture observation network exists. Therefore, the Met Office global soil moisture analysis scheme has instead used observations of screen temperature and humidity. A number of new space-borne remote sensing systems, operating at microwave frequencies, have been developed that provide a more direct retrieval of surface soil moisture. These systems are attractive since they provide global data coverage and the horizontal resolution is similar to weather forecasting models. Several studies show that measurements of normalised backscatter (surface soil wetness from the Advanced Scatterometer (ASCAT on the meteorological operational (MetOp satellite contain good quality information about surface soil moisture. This note describes methods to convert ASCAT surface soil wetness measurements to volumetric surface soil moisture together with bias correction and quality control. A computationally efficient nudging scheme is used to assimilate the ASCAT volumetric surface soil moisture data into the Met Office global soil moisture analysis. This ASCAT nudging scheme works alongside a soil moisture nudging scheme that uses observations of screen temperature and humidity. Trials, using the Met Office global Unified Model, of the ASCAT nudging scheme show a positive impact on forecasts of screen temperature and humidity for the tropics, North America and Australia. A comparison with in-situ soil moisture measurements from the US also indicates that assimilation of ASCAT surface soil wetness improves the soil moisture analysis. Assimilation of ASCAT surface soil wetness measurements became operational during July 2010.

  19. Anaerobic N mineralization in paddy soils in relation to inundation management, physicochemical soil fractions, mineralogy and soil properties

    Science.gov (United States)

    Sleutel, Steven; Kader, Mohammed Abdul; Ara Begum, Shamim; De Neve, Stefaan

    2013-04-01

    Anaerobic N mineralization measured from (saturated) repacked soil cores from 25 paddy fields in Bangladesh and was previously found to negatively related to soil N content on a relative basis. This suggests that other factors like soil organic matter (SOM) quality or abiotic factors instead control the anaerobic N mineralization process. We therefore assessed different physical and chemical fractions of SOM, management factors and various soil properties as predictors for the net anaerobic N mineralization. 1° First, we assessed routinely analyzed soil parameters (soil N and soil organic carbon, texture, pH, oxalate- and pyrophosphate-extractable Fe, Al, and Mn, fixed-NH4 content). We found no significant influences of neither soil mineralogy nor the annual length of inundation on soil N mineralization. The anaerobic N mineralization correlated positively with Na-pyrophosphate-extractable Fe and negatively with pH (both at Pisolate an oxidation-resistant OM fraction, followed by extraction of mineral bound OM with 10%HF thereby isolating the HF-resistant OM. None of the physicochemical SOM fractions were found useful predictors anaerobic N mineralization. The linkage between these chemical soil N fractions and N supplying processes actually occurring in the soil thus appears to be weak. Regardless, we hypothesize that variation in strength of N-mineral and N-OM linkages is likely to explain variation in bio-availability of organic N and proneness to mineralization. Yet, in order to separate kinetically different soil N fractions we then postulated that an alternative approach would be required, which instead isolates soil N fractions on the basis of bonding strength. In this respect bonding strength should be seen as opposite of proneness to dissolution of released N into water, the habitat of soil microorganisms mediating soil N mineralization. We hypothesize that soil N extracted by water at increasing temperatures would reflect such N fractions with increasing

  20. Nature's amazing biopolymer: basic mechanical and hydrological properties of soil affected by plant exudates

    Science.gov (United States)

    Naveed, Muhammad; Roose, Tiina; Raffan, Annette; George, Timothy; Bengough, Glyn; Brown, Lawrie; Keyes, Sam; Daly, Keith; Hallett, Paul

    2016-04-01

    Plant exudates are known to have a very large impact on soil physical properties through changes in mechanical and hydrological processes driven by long-chain polysaccharides and surface active compounds. Whilst these impacts are well known, the basic physical properties of these exudates have only been reported in a small number of studies. We present data for exudates obtained from barley roots and chia seeds, incorporating treatments examining biological decomposition of the exudates. When these exudates were added to a sandy loam soil, contact angle and drop penetration time increased exponentially with increasing exudate concentration. These wetting properties were strongly correlated with both exudate density and zero-shear viscosity, but not with exudate surface tension. Water holding capacity and water repellency of exudate mixed soil tremendously increased with exudate concentration, however they were significantly reduced on decomposition when measured after 14 days of incubation at 16C. Mechanical stability greatly increased with increasing exudate amendment to soils, which was assessed using a rheological amplitude sweep test near saturation, at -50 cm matric potential (field capacity) using indentation test, and at air-dry condition using the Brazilian test. This reflects that exudates not only attenuate plant water stress but also impart mechanical stability to the rhizosphere. These data are highly relevant to the understanding and modelling of rhizosphere development, which is the next phase of our research.

  1. Concentrations of Available Heavy Metals in Mediterranean Agricultural Soils and their Relation with Some Soil Selected Properties: A Case Study in Typical Mediterranean Soils

    Directory of Open Access Journals (Sweden)

    José Rato Nunes

    2014-12-01

    Full Text Available The characterization of the content of trace metals in soils is an instrument in many programs of environmental protection, including the establishment of regional-level standards to detect sites affected by contamination. The objectives of the present study were to study the available levels of Cd, Cr, Cu, Ni, Pb, and Zn in surface horizons of agricultural soils in a typical European Mediterranean region, to establish the geochemical baseline concentration (GBC, background level (BL, and reference value (RV of each of these available metals, and to investigate their possible correlations with soil properties. To establish the GBC and RV values, we used the “standard threshold method”. Topsoil samples (0–20 cm were collected from 630 sites, and extracted with Diethylene Triamine Pentaacetic Acid (DTPA to determine their available heavy metal concentrations. The GBC values established were: 0.04 to 0.90 mg kg−1, 0.70 to 2.50 mg kg−1, 0.10 to 6.30 mg kg−1, 0.30 to 7.90 mg kg−1, 0.29 to 4.50 mg kg−1, and 0.18 to 2.50 mg kg−1 for Cd, Cr, Cu, Ni, Pb, and Zn, respectively. Soil properties were found to be correlated with the available heavy metal content, suggesting that the enhanced mobility of heavy metals are related to anthropic activities.

  2. A temperature prediction-correction method for estimating surface soil heat flux from soil temperature and moisture data

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Surface soil heat flux is a component of surface energy budget and its estimation is needed in land-atmosphere interaction studies. This paper develops a new simple method to estimate soil heat flux from soil temperature and moisture observations. It gives soil temperature profile with the thermal diffusion equation and, then, adjusts the temperature profile with differences between observed and computed soil temperatures. The soil flux is obtained through integrating the soil temperature profile. Compared with previous methods, the new method does not require accurate thermal conductivity. Case studies based on observations, synthetic data, and sensitivity analyses show that the new method is preferable and the results obtained with it are not sensitive to the availability of temperature data in the topsoil. In addition, we pointed out that the soil heat flux measured with a heat-plate can be quite erroneous in magnitude though its phase is accurate.

  3. Physical and chemical properties of the Martian soil: Review of resources

    Science.gov (United States)

    Stoker, C. R.; Gooding, James L.; Banin, A.; Clark, Benton C.; Roush, Ted

    1991-01-01

    The chemical and physical properties of Martian surface materials are reviewed from the perspective of using these resources to support human settlement. The resource potential of Martian sediments and soils can only be inferred from limited analyses performed by the Viking Landers (VL), from information derived from remote sensing, and from analysis of the SNC meteorites thought to be from Mars. Bulk elemental compositions by the VL inorganic chemical (x ray fluorescence) analysis experiments have been interpreted as evidence for clay minerals (possibly smectites) or mineraloids (palagonite) admixed with sulfate and chloride salts. The materials contained minerals bearing Fe, Ti, Al, Mg and Si. Martian surface materials may be used in many ways. Martian soil, with appropriate preconditioning, can probably be used as a plant growth medium, supplying mechanical support, nutrient elements, and water at optimal conditions to the plants. Loose Martian soils could be used to cover structures and provide radiation shielding for surface habitats. Martian soil could be wetted and formed into abode bricks used for construction. Duricrete bricks, with strength comparable to concrete, can probably be formed using compressed muds made from martian soil.

  4. On the Soil Roughness Parameterization Problem in Soil Moisture Retrieval of Bare Surfaces from Synthetic Aperture Radar.

    Science.gov (United States)

    Verhoest, Niko E C; Lievens, Hans; Wagner, Wolfgang; Álvarez-Mozos, Jesús; Moran, M Susan; Mattia, Francesco

    2008-07-15

    Synthetic Aperture Radar has shown its large potential for retrieving soil moisture maps at regional scales. However, since the backscattered signal is determined by several surface characteristics, the retrieval of soil moisture is an ill-posed problem when using single configuration imagery. Unless accurate surface roughness parameter values are available, retrieving soil moisture from radar backscatter usually provides inaccurate estimates. The characterization of soil roughness is not fully understood, and a large range of roughness parameter values can be obtained for the same surface when different measurement methodologies are used. In this paper, a literature review is made that summarizes the problems encountered when parameterizing soil roughness as well as the reported impact of the errors made on the retrieved soil moisture. A number of suggestions were made for resolving issues in roughness parameterization and studying the impact of these roughness problems on the soil moisture retrieval accuracy and scale.

  5. Comparison among monitoring strategies to assess water flow dynamic and soil hydraulic properties in agricultural soils

    Directory of Open Access Journals (Sweden)

    Javier Valdes-Abellan

    2015-03-01

    Full Text Available Abstract Irrigated agriculture is usually performed in semi-arid regions despite scarcity of water resources. Therefore, optimal irrigation management by monitoring the soil is essential, and assessing soil hydraulic properties and water flow dynamics is presented as a first measure. For this purpose, the control of volumetric water content, θ, and pressure head, h, is required. This study adopted two types of monitoring strategies in the same experimental plot to control θ and h in the vadose zone: i non-automatic and more time-consuming; ii automatic connected to a datalogger. Water flux was modelled with Hydrus-1D using the data collected from both acquisition strategies independently (3820 daily values for the automatic; less than 1000 for the non-automatic. Goodness-of-fit results reported a better adjustment in case of automatic sensors. Both model outputs adequately predicted the general trend of θ and h, but with slight differences in computed annual drainage (711 mm and 774 mm. Soil hydraulic properties were inversely estimated from both data acquisition systems. Major differences were obtained in the saturated volumetric water content, θs, and the n and α van Genuchten model shape parameters. Saturated hydraulic conductivity, Ks, shown lower variability with a coefficient of variation range from 0.13 to 0.24 for the soil layers defined. Soil hydraulic properties were better assessed through automatic data acquisition as data variability was lower and accuracy was higher.

  6. Comparison among monitoring strategies to assess water flow dynamic and soil hydraulic properties in agricultural soils

    Energy Technology Data Exchange (ETDEWEB)

    Valdes-Abellan, J.; Jiménez-Martínez, J.; Candela, L.; Tamoh, K.

    2015-07-01

    Irrigated agriculture is usually performed in semi-arid regions despite scarcity of water resources. Therefore, optimal irrigation management by monitoring the soil is essential, and assessing soil hydraulic properties and water flow dynamics is presented as a first measure. For this purpose, the control of volumetric water content, θ, and pressure head, h, is required. This study adopted two types of monitoring strategies in the same experimental plot to control θ and h in the vadose zone: i) non-automatic and more time-consuming; ii) automatic connected to a datalogger. Water flux was modelled with Hydrus-1D using the data collected from both acquisition strategies independently (3820 daily values for the automatic; less than 1000 for the non-automatic). Goodness-of-fit results reported a better adjustment in case of automatic sensors. Both model outputs adequately predicted the general trend of θ and h, but with slight differences in computed annual drainage (711 mm and 774 mm). Soil hydraulic properties were inversely estimated from both data acquisition systems. Major differences were obtained in the saturated volumetric water content, θs, and the n and α van Genuchten model shape parameters. Saturated hydraulic conductivity, Ks, shown lower variability with a coefficient of variation range from 0.13 to 0.24 for the soil layers defined. Soil hydraulic properties were better assessed through automatic data acquisition as data variability was lower and accuracy was higher. (Author)

  7. Estimation of soil profile physical and chemical properties using a VIS-NIR-EC-force probe

    Science.gov (United States)

    Combining data collected in-field from multiple soil sensors has the potential to improve the efficiency and accuracy of soil property estimates. Optical diffuse reflectance spectroscopy (DRS) has been used to estimate many important soil properties, such as soil carbon, water content, and texture. ...

  8. Plant species diversity affects infiltration capacity in an experimental grassland through changes in soil properties

    NARCIS (Netherlands)

    Fischer, C.; Tischer, J.; Roscher, C.; Eisenhauer, N.; Ravenek, J.; Gleixner, G.; Attinger, S.; Jensen, B.; Kroon, de H.; Mommer, L.; Scheu, S.; Hildebrandt, A.

    2015-01-01

    Background and aims Soil hydraulic properties drive water distribution and availability in soil. There exists limited knowledge of how plant species diversity might influence soil hydraulic properties. Methods We quantified the change in infiltration capacity affected by soil structural variables (s

  9. Sensing soil properties in the laboratory, in situ, and on-Line: A review

    NARCIS (Netherlands)

    Kuang, B.; Mahmood, H.S.; Quraishi, Z.; Hoogmoed, W.B.; Mouazen, A.M.; Henten, van E.

    2012-01-01

    Since both the spatial and vertical heterogeneities in soil properties have an impact on crop growth and yield, accurate characterization of soil properties at high sampling resolution is a preliminary step in successful management of soil-water-plant system. Conventional soil sampling and analyses

  10. Profile soil property estimation using a VIS-NIR-EC-force probe

    Science.gov (United States)

    Combining data collected in-field from multiple soil sensors has the potential to improve the efficiency and accuracy of soil property estimates. Optical diffuse reflectance spectroscopy (DRS) has been used to estimate many important soil properties, such as soil carbon, water content, and texture. ...

  11. A promising new device to assess key soil hydraulic properties

    Science.gov (United States)

    Alaoui, Abdallah; Schwilch, Gudrun

    2016-04-01

    Hydraulic functions measured at the core or plot scale are notoriously variable in natural soils, with properties such as infiltration rate ranging across several orders of magnitude within a typical field. Because the information required to create a continuous map of these properties' variability is unobtainable, plot- and field-scale models of flow processes generally use average or "effective" soil hydraulic properties to represent the processes. This makes it difficult to scale up knowledge from the local to the catchment scale, as soil heterogeneity increases with scale. Overcoming this difficulty requires an instrument that enables rapid and easy assessment of the relevant soil properties and their changes under varying land uses and climatic conditions. For this reason, we devised a new infiltrometer that makes it possible to rapidly and reliably assess soil infiltration capacity in the field. Based on laboratory and field data, we then developed a software (Soil Quality Analyzer) to determine key hydraulic properties such as saturated hydraulic conductivity, saturated water content, total porosity, and the van Genuchten parameters. Our device consists of a Plexiglas tube about 4 cm in diameter mounted on a semisoft, porous tube of the same diameter which easily adapts to surrounding soil, and ending in a conic steel point that facilitates insertion into the soil at different depths. We first calibrated our infiltrometer based on reconstructed soil columns of different textures with no coarse structures (i.e. organic material, macropores). A second series of infiltration experiments was carried out in situ in undisturbed soils under forest and grassland that had the same textures as those in the laboratory experiments. Finally, we analyzed all samples in the laboratory to determine the key hydraulic parameters. Linear relationships between the infiltrated water volume and the corresponding time intervals of infiltration were determined for each sample

  12. Heavy metals content in degraded agricultural soils of a mountain region related to soil properties

    Science.gov (United States)

    Navarro-Pedreño, José; Belén Almendro-Candel, María; Gómez, Ignacio; Jordán, Manuel M.; Bech, Jaume; Zorpas, Antonis

    2017-04-01

    Agriculture has been practiced for long time in Mediterranean regions. Intensive agriculture and irrigation have developed mainly in the valleys and coastal areas. In the mountainous areas, dry farming has been practiced for centuries. Soils have been fertilized using mainly organic amendments. Plants extracted nutrients and other elements like heavy metals presented in soils and agricultural practices modified soil properties that could favor the presence of heavy metals. In this work, it has been checked the content of heavy metals in 100 agricultural soils samples of the NorthWest area of the province of Alicante (Spain) which has been long cultivated with cereals and olive trees, and now soils are abandoned and degraded because of the low agricultural yields. European policy has the aim to improve the sustainable agriculture and recover landscapes of mountain regions. So that, it is important to check the state of the soils (Marques et al. 2007). Soils samples (arable layer) were analyzed determining: pH (1:5, w/v, water extract), equivalent calcium carbonate content, organic matter by Walkley-Black method (Nelson and Sommers 1996), micronutrients (Cu, Fe, Mn, Zn) extracted with DTPA (Lindsay and Norvell, 1978) and measured by atomic absorption spectrometry, and total content of metals (Cd, Cr, Ni, Pb) measured in soil samples after microwave acid digestion (Moral et al. 1996), quantifying the content of metals by ICP analysis. The correlation between soil properties and metals. The results indicated that pH and carbonates are the most important properties of these soils correlated with the metals (both micronutrients and heavy metals). The available micronutrients (all of them) are close correlated with the pH and carbonates in soils. Moreover, heavy metals like Pb and Ni are related to available Mn and Zn. Keywords: pH, carbonates, heavy metals, abandoned soils. References: Lindsay,W.L., andW.A. Norvell. 1978. "Development of a DTPA Soil Test for Zinc, Iron

  13. Evaluation of the underground soil thermal storage properties in Libya

    Energy Technology Data Exchange (ETDEWEB)

    Nassar, Y.; ElNoaman, A.; Abutaima, A.; Yousif, S.; Salem, A. [Solar Energy Laboratory, Faculty of Engineering and Technology, Sebha University, P.O. Box 68, Brack (Libya)

    2006-04-15

    Experimental investigation was conducted of temperature distribution through the underground soil of Tripoli (Capital of Libya). The aim of the experiment is to monitor the temperature variation of the underground soil under a depth of 4m and around the year, in order to know the thermal capacity ability of the soil to be used as a seasonal thermal storage. The measurements covered two types of systems: the first one is dry soil and the second is dry soil covered by a glass sheet. The measurements indicate that, at a depth of 4m, the average temperatures for the dry and dry-glass covered systems are 21, 46{sup o}C, with maximum temperatures of 21.5 and 47{sup o}C during December and January, and the minimum temperatures occurred in May and June, are reached values of 19, 44{sup o}C, respectively. The temperatures for the two systems were almost constant through the year and fluctuating with a monthly period of 2p/12. Results show that, the underground thermal capacity can be used as a source of heating and cooling of buildings leading to reduce the energy consumption in this application. Furthermore, for industrial and domestic heating processes, one can utilize the dry-glass covered system to cover a significant part of the heating load. Anyhow, the experimental study may not applicable everywhere, so an analytical presentation for the system will be necessary to save money and efforts. The first step to put the analytical model in reality is to get the thermal properties of the underground soil, and this is the aim of the present study. The paper described the followed procedure during theoretical-heat transfer approach. The thermal properties were presented as a function of the ground depth, furthermore, the paper presented the measured temperatures of the two systems for Tripoli underground soil. [Author].

  14. A New Method of Environmental Assessment and Monitoring of Cu, Zn, As, and Pb Pollution in Surface Soil Using Terricolous Fruticose Lichens

    Directory of Open Access Journals (Sweden)

    Yuri Sueoka

    2016-12-01

    Full Text Available Levels of trace element pollution in surface soil can be estimated using soil analyses and leaching tests. These methods may reveal different results due to the effect of soil properties, such as grain size and mineral composition, on elemental availability. Therefore, this study advocates an alternative method for monitoring and assessment of trace element pollution in surface soil using terricolous fruticose lichens. Lichens growing at abandoned mine sites and unpolluted areas in southwest Japan and their substrata were analyzed using inductively coupled plasma-mass spectrometry and X-ray fluorescence spectrometry to clarify the relationships between Cu, Zn, As, and Pb concentrations in lichens and soils, including their absorption properties. Concentrations of these elements in the lichens were positively correlated with those in the soils regardless of lichen species, location, habitat, or conditions of soils. The analyzed lichens had neither competitive nor antagonistic properties in their elemental absorption, which made them good biomonitors of trace element pollution in surface soil. The distribution maps of average Cu, Zn, As, and Pb concentrations at each sampling region detected almost all of the Cu, Zn, and As pollution of the soils. Therefore, lichens could be used in practical applications to monitor Cu, Zn, and As pollution in surface soils.

  15. Soil layer condensation peak as a response to soil water properties under Sudanese climatic conditions

    Science.gov (United States)

    Valet, S.; Motelica-Heino, M.; Ozier-Lafontaine, H.

    2012-04-01

    The soil apparent density is strongly dependent on their physico-chemical properties. It can be negatively impacted by human activities such as soil work or animal pasture or natural salinity influenced by irrigation.. In contrast it can be improved for different depths by agricultural practices. A « condensation peak » defined as an increase in the apparent density was found for the heterogeneous soils of Niger for several profiles of 5 soil classes and for a very shallow depth (10 cm maximum) with a very variable extreme depth (from 35 to 150 cm) associated with extreme density values (from 1.45 to 2). The depth of this peak, for soils neither saline nor vertic, varies inversely with the proportion of soil fine elements (silts+clays). However it corresponds to an average value of useful water (AWC) of 100mm (CV=24.4%). In sodic and alkaline soils this peak can be observed at shallow depths (from 53 to 61cm with a CV from 15 to 40%), thus for much lower AWC values (from 74 to 87cm with a CV from 26 to 47%). It can be found either below or above an impermeable horizon of a maximal density of 2.. This peak is likely to be associated with a multi-annual alternance of humectation-dessication at this depth. Its occurrence is based on an interplay of intrinsic physical and hydric soil properties but also on extrisnic parameters sch as the pluviometry, the location at the scale of the watershed and the micromodelling.

  16. Analysis of the sorption properties of different soils using water vapour adsorption and potentiometric titration methods

    Science.gov (United States)

    Skic, Kamil; Boguta, Patrycja; Sokołowska, Zofia

    2016-07-01

    Parameters of specific surface area as well as surface charge were used to determine and compare sorption properties of soils with different physicochemical characteristics. The gravimetric method was used to obtain water vapour isotherms and then specific surface areas, whereas surface charge was estimated from potentiometric titration curves. The specific surface area varied from 12.55 to 132.69 m2 g-1 for Haplic Cambisol and Mollic Gleysol soil, respectively, and generally decreased with pH (R=0.835; α = 0.05) and when bulk density (R=-0.736; α = 0.05) as well as ash content (R=-0.751; α = 0.05) increased. In the case of surface charge, the values ranged from 63.00 to 844.67 μmol g-1 Haplic Fluvisol and Mollic Gleysol, respecively. Organic matter gave significant contributions to the specific surface area and cation exchange capacity due to the large surface area and numerous surface functional groups, containing adsorption sites for water vapour molecules and for ions. The values of cation exchange capacity and specific surface area correlated linearly at the level of R=0.985; α = 0.05.

  17. Describing soil surface microrelief by crossover length and fractal dimension

    Directory of Open Access Journals (Sweden)

    E. Vidal Vázquez

    2007-05-01

    Full Text Available Accurate description of soil surface topography is essential because different tillage tools produce different soil surface roughness conditions, which in turn affects many processes across the soil surface boundary. Advantages of fractal analysis in soil microrelief assessment have been recognised but the use of fractal indices in practice remains challenging. There is also little information on how soil surface roughness decays under natural rainfall conditions. The objectives of this work were to investigate the decay of initial surface roughness induced by natural rainfall under different soil tillage systems and to compare the performances of a classical statistical index and fractal microrelief indices. Field experiments were performed on an Oxisol at Campinas, São Paulo State (Brazil. Six tillage treatments, namely, disc harrow, disc plow, chisel plow, disc harrow + disc level, disc plow + disc level and chisel plow + disc level were tested. Measurements were made four times, firstly just after tillage and subsequently with increasing amounts of natural rainfall. Duplicated measurements were taken per treatment and date, yielding a total of 48 experimental surfaces. The sampling scheme was a square grid with 25×25 mm point spacing and the plot size was 1350×1350 mm, so that each data set consisted of 3025 individual elevation points. Statistical and fractal indices were calculated both for oriented and random roughness conditions, i.e. after height reading have been corrected for slope and for slope and tillage tool marks. The main drawback of the standard statistical index random roughness, RR, lies in its no spatial nature. The fractal approach requires two indices, fractal dimension, D, which describes how roughness changes with scale, and crossover length, l, specifying the variance of surface microrelief at a reference scale. Fractal parameters D and l, were estimated by two independent self-affine models

  18. GEMAS: Unmixing magnetic properties of European agricultural soil

    Science.gov (United States)

    Fabian, Karl; Reimann, Clemens; Kuzina, Dilyara; Kosareva, Lina; Fattakhova, Leysan; Nurgaliev, Danis

    2016-04-01

    High resolution magnetic measurements provide new methods for world-wide characterization and monitoring of agricultural soil which is essential for quantifying geologic and human impact on the critical zone environment and consequences of climatic change, for planning economic and ecological land use, and for forensic applications. Hysteresis measurements of all Ap samples from the GEMAS survey yield a comprehensive overview of mineral magnetic properties in European agricultural soil on a continental scale. Low (460 Hz), and high frequency (4600 Hz) magnetic susceptibility k were measured using a Bartington MS2B sensor. Hysteresis properties were determined by a J-coercivity spectrometer, built at the paleomagnetic laboratory of Kazan University, providing for each sample a modified hysteresis loop, backfield curve, acquisition curve of isothermal remanent magnetization, and a viscous IRM decay spectrum. Each measurement set is obtained in a single run from zero field up to 1.5 T and back to -1.5 T. The resulting data are used to create the first continental-scale maps of magnetic soil parameters. Because the GEMAS geochemical atlas contains a comprehensive set of geochemical data for the same soil samples, the new data can be used to map magnetic parameters in relation to chemical and geological parameters. The data set also provides a unique opportunity to analyze the magnetic mineral fraction of the soil samples by unmixing their IRM acquisition curves. The endmember coefficients are interpreted by linear inversion for other magnetic, physical and chemical properties which results in an unprecedented and detailed view of the mineral magnetic composition of European agricultural soils.

  19. THE RELATIONSHIPS BETWEEN BIOCHEMICAL ACTIVITY CHARACTERICTIES AND SOIL PROPERTIES OF HAZELNUT GROWN SOILS

    Directory of Open Access Journals (Sweden)

    Ayten KARACA

    1998-03-01

    Full Text Available In this research, enzyme activities of soil cultivated for hazelnut in Terme and Ünye townships were determined and the relationships between the activities and some soil properties, trace elements and heavy metals were evaluated. Correlation and regression analysis showed that there was significant positive correlation between urease activity and organic carbon, nitrogen and extractable Cu; strong positive correlation between acid phosphates activity and organic matter, organic carbon and nitrogen; but negative correlation between the activities and extractable Mn content. Additionally, positive correlation was found between alkaline phosphatase activity and pH, available P, extractable Cu, Zn and Pb contents. With the exception of C/N ratio and extractable Cd content, no significant correlation was observed between ß- glikosidase activity and soil properties.

  20. Assimilation of neural network soil moisture in land surface models

    Science.gov (United States)

    Rodriguez-Fernandez, Nemesio; de Rosnay, Patricia; Albergel, Clement; Aires, Filipe; Prigent, Catherine; Kerr, Yann; Richaume, Philippe; Muñoz-Sabater, Joaquin; Drusch, Matthias

    2017-04-01

    In this study a set of land surface data assimilation (DA) experiments making use of satellite derived soil moisture (SM) are presented. These experiments have two objectives: (1) to test the information content of satellite remote sensing of soil moisture for numerical weather prediction (NWP) models, and (2) to test a simplified assimilation of these data through the use of a Neural Network (NN) retrieval. Advanced Scatterometer (ASCAT) and Soil Moisture and Ocean Salinity (SMOS) data were used. The SMOS soil moisture dataset was obtained specifically for this project training a NN using SMOS brightness temperatures as input and using as reference for the training European Centre for Medium-Range Weather Forecasts (ECMWF) H-TESSEL SM fields. In this way, the SMOS NN SM dataset has a similar climatology to that of the model and it does not present a global bias with respect to the model. The DA experiments are computed using a surface-only Land Data Assimilation System (so-LDAS) based on the HTESSEL land surface model. This system is very computationally efficient and allows to perform long surface assimilation experiments (one whole year, 2012). SMOS NN SM DA experiments are compared to ASCAT SM DA experiments. In both cases, experiments with and without 2 m air temperature and relative humidity DA are discussed using different observation errors for the ASCAT and SMOS datasets. Seasonal, geographical and soil-depth-related differences between the results of those experiments are presented and discussed. The different SM analysed fields are evaluated against a large number of in situ measurements of SM. On average, the SM analysis gives in general similar results to the model open loop with no assimilation even if significant differences can be seen for specific sites with in situ measurements. The sensitivity to observation errors to the SM dataset slightly differs depending on the networks of in situ measurements, however it is relatively low for the tests

  1. A Variational Method for Estimating Near-Surface Soil Moisture and Surface Heat Fluxes

    Institute of Scientific and Technical Information of China (English)

    ZHANG Shuwen; ZHANG Weidong; QIU Chongjian

    2007-01-01

    A variational data assimilation method is proposed to estimate the near-surface soil moisture and surface sensible and latent heat fluxes. The method merges the five parts into a cost function, I.e., the differences of wind, potential temperature, and specific humidity gradient between observations and those computed by the profile method, the difference of latent heat fluxes calculated using the ECMWF land surface evaporation scheme and the profile method, and a weak constraint for surface energy balance. By using an optimal algorithm, the best solutions are found. The method is tested with the data collected at Feixi Station (31.41°N, 117.08°E) supported by the China Heavy Rain Experiment and Study (HeRES) during 7-30 June 2001. The results show that estimated near-surface soil moistures can quickly respond to rainfall, and their temporal variation is consistent with that of measurements of average soil moisture over 15-cm top depth with a maximum error less than 0.03 m3 m-3. The surface heat fluxes calculated by this method are consistent with those by the Bowen ratio method, but at the same time it can overcome the instability problem occurring in the Bowen ratio method when the latter is about -1. Meanwhile, the variational method is more accurate than the profile method in terms of satisfying the surface energy balance. The sensitivity tests also show that the variational method is the most stable one among the three methods.

  2. From near-surface to root-zone soil moisture using an exponential filter: an assessment of the method based on in-situ observations and model simulations

    Directory of Open Access Journals (Sweden)

    C. Albergel

    2008-12-01

    Full Text Available A long term data acquisition effort of profile soil moisture is under way in southwestern France at 13 automated weather stations. This ground network was developed in order to validate remote sensing and model soil moisture estimates. In this paper, both those in situ observations and a synthetic data set covering continental France are used to test a simple method to retrieve root zone soil moisture from a time series of surface soil moisture information. A recursive exponential filter equation using a time constant, T, is used to compute a soil water index. The Nash and Sutcliff coefficient is used as a criterion to optimise the T parameter for each ground station and for each model pixel of the synthetic data set. In general, the soil water indices derived from the surface soil moisture observations and simulations agree well with the reference root-zone soil moisture. Overall, the results show the potential of the exponential filter equation and of its recursive formulation to derive a soil water index from surface soil moisture estimates. This paper further investigates the correlation of the time scale parameter T with soil properties and climate conditions. While no significant relationship could be determined between T and the main soil properties (clay and sand fractions, bulk density and organic matter content, the modelled spatial variability and the observed inter-annual variability of T suggest that a weak climate effect may exist.

  3. Soil water repellency changes with depth and relationship to physical properties within wettable and repellent soil profiles

    Directory of Open Access Journals (Sweden)

    Sepehrnia Nasrollah

    2017-03-01

    Full Text Available This study explored the effect of soil water repellency (SWR on soil hydrophysical properties with depth. Soils were sampled from two distinctly wettable and water repellent soil profiles at depth increments from 0-60 cm. The soils were selected because they appeared to either wet readily (wettable or remain dry (water repellent under field conditions. Basic soil properties (MWD, SOM, θv were compared to hydrophysical properties (Ks, Sw, Se, Sww, Swh, WDPT, RIc, RIm and WRCT that characterise or are affected by water repellency. Our results showed both soil and depth affected basic and hydrophysical properties of the soils (p <0.001. Soil organic matter (SOM was the major property responsible for water repellency at the selected depths (0-60. Water repellency changes affected moisture distribution and resulted in the upper layer (0-40 cm of the repellent soil to be considerably drier compared to the wettable soil. The water repellent soil also had greater MWDdry and Ks over the entire 0-60 cm depth compared to the wettable soil. Various measures of sorptivity, Sw, Se, Sww, Swh, were greater through the wettable than water repellent soil profile, which was also reflected in field and dry WDPT measurements. However, the wettable soil had subcritical water repellency, so the range of data was used to compare indices of water repellency. WRCT and RIm had less variation compared to WDPT and RIc. Estimating water repellency using WRCT and RIm indicated that these indices can detect the degree of SWR and are able to better classify SWR degree of the subcritical-repellent soil from the wettable soil.

  4. 3D-Digital soil property mapping by geoadditive models

    Science.gov (United States)

    Papritz, Andreas

    2016-04-01

    In many digital soil mapping (DSM) applications, soil properties must be predicted not only for a single but for multiple soil depth intervals. In the GlobalSoilMap project, as an example, predictions are computed for the 0-5 cm, 5-15 cm, 15-30 cm, 30-60 cm, 60-100 cm, 100-200 cm depth intervals (Arrouays et al., 2014). Legacy soil data are often used for DSM. It is common for such datasets that soil properties were measured for soil horizons or for layers at varying soil depth and with non-constant thickness (support). This poses problems for DSM: One strategy is to harmonize the soil data to common depth prior to the analyses (e.g. Bishop et al., 1999) and conduct the statistical analyses for each depth interval independently. The disadvantage of this approach is that the predictions for different depths are computed independently from each other so that the predicted depth profiles may be unrealistic. Furthermore, the error induced by the harmonization to common depth is ignored in this approach (Orton et al. 2016). A better strategy is therefore to process all soil data jointly without prior harmonization by a 3D-analysis that takes soil depth and geographical position explicitly into account. Usually, the non-constant support of the data is then ignored, but Orton et al. (2016) presented recently a geostatistical approach that accounts for non-constant support of soil data and relies on restricted maximum likelihood estimation (REML) of a linear geostatistical model with a separable, heteroscedastic, zonal anisotropic auto-covariance function and area-to-point kriging (Kyriakidis, 2004.) Although this model is theoretically coherent and elegant, estimating its many parameters by REML and selecting covariates for the spatial mean function is a formidable task. A simpler approach might be to use geoadditive models (Kammann and Wand, 2003; Wand, 2003) for 3D-analyses of soil data. geoAM extend the scope of the linear model with spatially correlated errors to

  5. Soil health: an emergent set of soil properties that result from synergy among agricultural management practices

    Science.gov (United States)

    The responses of a selected soil microbial property to a single agricultural management practice are often inconsistent among field studies, possibly reflecting the site-specific nature of field studies. An equally compelling explanation is that in complex systems where outcomes are the result of n...

  6. Prediction of Soil Fertility Properties from a Globally Distributed S