WorldWideScience

Sample records for surface sediments reflect

  1. Relationship of intertidal surface sediment chlorophyll concentration to hyper-spectral reflectance and chlorophyll fluorescence

    NARCIS (Netherlands)

    Kromkamp, J.C.; Morris, E.P.; Forster, R.M.; Honeywill, C.; Hagerthey, S.; Paterson, D.M.

    2006-01-01

    Estimating biomass of microphytobenthos (MPB) on intertidal mud flats is extremely difficult due to their patchy occurrence, especially at the scale of an entire mud flat. We tested two optical approaches that can be applied in situ: spectral reflectance and chlorophyll fluorescence. These two

  2. Habitat heterogeneity reflected in mesophotic reef sediments

    Science.gov (United States)

    Weinstein, D. K.; Klaus, J. S.; Smith, T. B.

    2015-11-01

    Modern reef sediments reflect the physical and chemical characteristics of the environment as well as the local reef fauna. Analysis of sedimentary reef facies can thus provide a powerful tool in interpreting ancient reef deposits. However, few studies have attempted to differentiate sedimentary facies in mesophotic coral ecosystems, low light habitats defined as residing 30-150 m below sea level. The low-angle shelf mesophotic coral ecosystem south of the northern U.S. Virgin Islands (USVI) consists of reefs with different structural characteristics ideal for studying the relationship between habitat variability and sedimentary facies. Textural, compositional, and geochemical analyses of surface sediments were used to identify mesophotic reef subfacies associated with distinct benthic communities and structural habitats. Sediment grain composition and bulk geochemistry were found to broadly record the distribution and abundance of coral and macroalgae communities, foundational mesophotic reef benthic organisms. Overall, sediment composition was found to be a good indicator of specific reef environments in low-angle mesophotic reef habitats. Sedimentological analyses indicate that hydrodynamic forces do not transport a significant amount of allochthonous sediment or potentially harmful terrigenous material to USVI mesophotic reefs. Episodic, maximum current velocities prevented deposition of most silt-size grains and smaller, but biological processes were found to have a greater influence on subfacies partitioning than hydrodynamic processes. Results provide a new analog for studies of ancient mesophotic coral ecosystem geological history and document the relationship between mesophotic reef subfacies, structural complexity, and habitat heterogeneity. They also demonstrate how mesophotic reefs along the same shelf system do not always share similar sedimentary characteristics and thus record a diverse set of ecological and environmental conditions.

  3. The contribution of bank and surface sediments to fluvial sediment ...

    African Journals Online (AJOL)

    Sediment source studies involving a simple mixing model was undertaken in the Pra River Basin in Ghana using a single tracer 210Pb to determine the relative contribution of surface and bank sediments to the fluvial sediment transport. Sediment source tracing was performed on the basis of sub-basins by comparing the ...

  4. Nutrient dynamics and oceanographic features in the central Namibian upwelling region as reflected in δ15N-signals of suspended matter and surface sediments

    Directory of Open Access Journals (Sweden)

    S. Meisel

    2011-08-01

    Full Text Available The study deals with the modern situation of the northern Benguela Upwelling, directing particular attention to the shelf region off central Namibia (21 to 24° S. At the centre of the investigation is the comparison of δ15N-records in surface sediments (δ15Nsediment with suspended particulate matter (δ15NSPM from the surface ocean. In addition to that, water column profiles (including hydrographic data provide an insight into changes of δ15NSPM with depth and elucidate potential offsets between δ15NSPM and δ15Nsediment. The parallel spatial trend of δ15Nsediment and surface ocean δ15NSPM shows that secondary processes are not so pronounced as to obliterate the signal generated in the surface waters. Highest δ15N-signatures are found right off the coast where water temperatures are lowest. Concomitantly high productivity rates and low bottom oxygen suggest the upwelling of denitrified source waters. With increasing distance offshore, δ15N declines unexpectedly, reaching a minimum above the shelf break. Beyond that, the trend reverses to "normal" with δ15N-signals continuously increasing towards the mesopelagic ocean. The decrease in δ15Nsediment and surface ocean δ15NSPM with increasing distance to the coast disagrees with the concept of Rayleigh fractionation kinetics, viz. the progressive 15N-enrichment of the nitrate pool as it is gradually used up by phytoplankton growth. On the basis of the available evidence, the downward trend of δ15N results from decreased relative nitrate consumption, resting on a combination of reduced primary production and the existence of an ulterior source of nutrients. Nutrient replenishment seems to occur via an additional upwelling front at the edge of the shelf as well as tapping of subsurface nitrate through sufficiently deep penetration of wind- and wave-induced mixing over large areas of the shelf. Both mechanisms are considered capable of working against the expected nutrient drawdown (i.e. 15

  5. Characterization of polychlorinated biphenyls in surface sediments ...

    African Journals Online (AJOL)

    The distribution and concentrations of 6 indicator polychlorinated biphenyl (PCB) congeners, nos. 28, 52, 101, 138, 153 and 180, were determined in surface sediments from the North End Lake in Port Elizabeth, South Africa. Forty-two surficial sediment samples were collected from different locations covering the region that ...

  6. Environmental mineralogy of unconsolidated surface sediments ...

    African Journals Online (AJOL)

    Environmental mineralogy of unconsolidated surface sediments associated with the 2001 landslides on volcanic cones, Mabeta New Layout, Limbe, Cameroon. George Ekosse, Veronica Ngole, Yinda Sendze, Samuel Ayonghe ...

  7. A climatology of visible surface reflectance spectra

    International Nuclear Information System (INIS)

    Zoogman, Peter; Liu, Xiong; Chance, Kelly; Sun, Qingsong; Schaaf, Crystal; Mahr, Tobias; Wagner, Thomas

    2016-01-01

    We present a high spectral resolution climatology of visible surface reflectance as a function of wavelength for use in satellite measurements of ozone and other atmospheric species. The Tropospheric Emissions: Monitoring of Pollution (TEMPO) instrument is planned to measure backscattered solar radiation in the 290–740 nm range, including the ultraviolet and visible Chappuis ozone bands. Observation in the weak Chappuis band takes advantage of the relative transparency of the atmosphere in the visible to achieve sensitivity to near-surface ozone. However, due to the weakness of the ozone absorption features this measurement is more sensitive to errors in visible surface reflectance, which is highly variable. We utilize reflectance measurements of individual plant, man-made, and other surface types to calculate the primary modes of variability of visible surface reflectance at a high spectral resolution, comparable to that of TEMPO (0.6 nm). Using the Moderate-resolution Imaging Spectroradiometer (MODIS) Bidirection Reflectance Distribution Function (BRDF)/albedo product and our derived primary modes we construct a high spatial resolution climatology of wavelength-dependent surface reflectance over all viewing scenes and geometries. The Global Ozone Monitoring Experiment–2 (GOME-2) Lambertian Equivalent Reflectance (LER) product provides complementary information over water and snow scenes. Preliminary results using this approach in multispectral ultraviolet+visible ozone retrievals from the GOME-2 instrument show significant improvement to the fitting residuals over vegetated scenes. - Highlights: • Our goals was visible surface reflectance for satellite trace gas measurements. • Captured the range of surface reflectance spectra through EOF analysis. • Used satellite surface reflectance products for each given scene to anchor EOFs. • Generated a climatology of time/geometry dependent surface reflectance spectra. • Demonstrated potential to

  8. Surface sedimentation at permeable pavement systems

    DEFF Research Database (Denmark)

    Støvring, Jan; Dam, Torben; Jensen, Marina Bergen

    2018-01-01

    of restorative cleaning (RC), nine recently built PP systems were tested for their infiltration capacity with and without restorative cleaning (RC) over an interval of 12–14.5 months. The results were related to each site’s unique history of sedimentation. RC significantly improved permeability, but when...... revisited after approximately one year, the permeability of cleaned surfaces was not significantly better for the RC spots than from their uncleaned neighbouring areas. Relating permeability to the contextual issues revealed that PP perimeter, adjacent bare soil and mismanagement strongly affected...... the sedimentation process. At two of the sites, sedimentation processes were so advanced that surface permeability was below the level of service (five-year design storm)....

  9. Methanotrophy in surface sediments of streams

    Science.gov (United States)

    Bagnoud, Alexandre; Pramateftaki, Paraskevi; Peter, Hannes; Battin, Tom

    2017-04-01

    Because streams are often found to be supersaturated in methane (CH4), they are considered as atmospheric sources of this greenhouse gas. However, little is known about the processes driving CH4 cycling in these environments, i.e. production, consumption and fluxes. CH4 is thought to be produced in deeper anoxic sediments, before it migrates up to reach the oxic stream water, where it can be oxidized by methanotrophs. In order to gain insights into this process, we investigated 14 different streams across Switzerland. We characterized the chemistry of surface and sediment waters by measuring dissolved chemical profiles. We also sampled surface sediments and determined methanotrophic rates with laboratory incubations and Michaelis-Menten modeling. Interestingly, rates were strongly correlated with the CH4 concentrations in stream waters, rather than in sediment waters. This indicates that methantrophic populations feed on CH4 from the surface streamwater, even though CH4 concentrations are higher in the sediment waters. Methanotrophy rates were also correlated with Crenothrix counts (based on 16S rRNA sequencing), a strict methanotroph, while this latter was correlated with pmoA counts (based on quantitative PCR), a gene involved in methanotrophy. These results show that Crenothrix genera are the most active methanotrophs in surface sediments of streams, and can represent more than 2% of microbial communities. Remarkably, the dominating Crenothrix species was detected in all 14 samples. This work allows the assessment of in situ methanotrophic rates, of the environmental parameters driving this process, and of the microbial populations carrying it out, and thus brings useful insights about carbon cycling in streams.

  10. A climatology of visible surface reflectance spectra

    Science.gov (United States)

    Zoogman, Peter; Liu, Xiong; Chance, Kelly; Sun, Qingsong; Schaaf, Crystal; Mahr, Tobias; Wagner, Thomas

    2016-09-01

    We present a high spectral resolution climatology of visible surface reflectance as a function of wavelength for use in satellite measurements of ozone and other atmospheric species. The Tropospheric Emissions: Monitoring of Pollution (TEMPO) instrument is planned to measure backscattered solar radiation in the 290-740 nm range, including the ultraviolet and visible Chappuis ozone bands. Observation in the weak Chappuis band takes advantage of the relative transparency of the atmosphere in the visible to achieve sensitivity to near-surface ozone. However, due to the weakness of the ozone absorption features this measurement is more sensitive to errors in visible surface reflectance, which is highly variable. We utilize reflectance measurements of individual plant, man-made, and other surface types to calculate the primary modes of variability of visible surface reflectance at a high spectral resolution, comparable to that of TEMPO (0.6 nm). Using the Moderate-resolution Imaging Spectroradiometer (MODIS) Bidirection Reflectance Distribution Function (BRDF)/albedo product and our derived primary modes we construct a high spatial resolution climatology of wavelength-dependent surface reflectance over all viewing scenes and geometries. The Global Ozone Monitoring Experiment-2 (GOME-2) Lambertian Equivalent Reflectance (LER) product provides complementary information over water and snow scenes. Preliminary results using this approach in multispectral ultraviolet+visible ozone retrievals from the GOME-2 instrument show significant improvement to the fitting residuals over vegetated scenes.

  11. A Bayesian Reflection on Surfaces

    Directory of Open Access Journals (Sweden)

    David R. Wolf

    1999-10-01

    Full Text Available Abstract: The topic of this paper is a novel Bayesian continuous-basis field representation and inference framework. Within this paper several problems are solved: The maximally informative inference of continuous-basis fields, that is where the basis for the field is itself a continuous object and not representable in a finite manner; the tradeoff between accuracy of representation in terms of information learned, and memory or storage capacity in bits; the approximation of probability distributions so that a maximal amount of information about the object being inferred is preserved; an information theoretic justification for multigrid methodology. The maximally informative field inference framework is described in full generality and denoted the Generalized Kalman Filter. The Generalized Kalman Filter allows the update of field knowledge from previous knowledge at any scale, and new data, to new knowledge at any other scale. An application example instance, the inference of continuous surfaces from measurements (for example, camera image data, is presented.

  12. Reflection of Slow Electrons from Solid Surface

    Science.gov (United States)

    Mustafaev, Alexander; Ainov, Matsak; Kaganovich, Igor; Demidov, Vladimir

    2013-09-01

    Given that progress of future plasma technologies depends on control of electron coefficient reflection r0, the development of methods of measurement and control of r0 is of great importance. Published experimental data on r0 for slow electrons are inconsistent and sometime give large values up to r0 ~ 0 , 8 and even higher. This talk presents a technique for r0 measurements in low pressure plasmas in the presence of transverse magnetic field. It is found that for poly-crystal surface, effective reflection coefficient can really reach value of 0.8. It is demonstrated that it is connected to additional reflection from potential barrier near the surfaces. The contribution of electron reflection from the barrier and the surface has been divided and studied. The data have been confirmed at different mono-crystal surfaces. This work was supported by DoE Fusion Energy Sciences contract DE-SC0001939 and Education Ministry of the RF.

  13. Specular Reflection from Rough Surfaces Revisited

    Science.gov (United States)

    Yasuda, Kensei; Kim, Alvin; Cho, Hayley; Timofejev, Timofej; Walecki, Wojciech J.; Klep, James; Edelson, Amy S.; Walecki, Abigail S.; Walecki, Eve S.; Walecki, Peter S.

    2016-01-01

    In his beautiful paper, Hasan Fakhruddin reported observations of mirror-like reflections in the rough surface of a ground glass plate. Similar effects have been recently employed for metrology of the roughness of optical diffusers used in modern light emitting device illumination systems. We report the observations of specular reflection in…

  14. Simulation Tool for GNSS Ocean Surface Reflections

    OpenAIRE

    Høeg, Per; von Benzon, Hans-Henrik; Durgonics, Tibor

    2015-01-01

    GNSS coherent and incoherent reflected signals have the potential of deriving large scale parameters of ocean surfaces, as barotropic variability, eddy currents and fronts, Rossby waves, coastal upwelling, mean ocean surfaceheights, and patterns of the general ocean circulation. In the reflection zone the measurements may deriveparameters as sea surface roughness, winds, waves, heights and tilts from the spectral measurements. Previous measurements from the top of mountains and airplanes have...

  15. Climate oscillations reflected within the microbiome of Arabian Sea sediments

    KAUST Repository

    Orsi, William D.

    2017-07-14

    Selection of microorganisms in marine sediment is shaped by energy-yielding electron acceptors for respiration that are depleted in vertical succession. However, some taxa have been reported to reflect past depositional conditions suggesting they have experienced weak selection after burial. In sediments underlying the Arabian Sea oxygen minimum zone (OMZ), we performed the first metagenomic profiling of sedimentary DNA at centennial-scale resolution in the context of a multi-proxy paleoclimate reconstruction. While vertical distributions of sulfate reducing bacteria and methanogens indicate energy-based selection typical of anoxic marine sediments, 5–15% of taxa per sample exhibit depth-independent stratigraphies indicative of paleoenvironmental selection over relatively short geological timescales. Despite being vertically separated, indicator taxa deposited under OMZ conditions were more similar to one another than those deposited in bioturbated intervals under intervening higher oxygen. The genomic potential for denitrification also correlated with palaeo-OMZ proxies, independent of sediment depth and available nitrate and nitrite. However, metagenomes revealed mixed acid and Entner-Dourdoroff fermentation pathways encoded by many of the same denitrifier groups. Fermentation thus may explain the subsistence of these facultatively anaerobic microbes whose stratigraphy follows changing paleoceanographic conditions. At least for certain taxa, our analysis provides evidence of their paleoenvironmental selection over the last glacial-interglacial cycle.

  16. On automatic visual inspection of reflective surfaces

    DEFF Research Database (Denmark)

    Kulmann, Lionel

    1995-01-01

    lighting methods in a framework, general usable for inspecting reflective surfaces. Special attention has been given to the design of illumination techniques to enhance defects of highly reflective aluminum sheets. The chosen optical system setup has been used to enhance surface defects of other reflective......This thesis descrbes different methods to perform automatic visual inspection of reflective manufactured products, with the aim of increasing productivity, reduce cost and improve the quality level of the production. We investigate two different systems performing automatic visual inspection....... The first is the inspection of highly reflective aluminum sheets, used by the Danish company Bang & Olufsen, as a part of the exterior design and general appearance of their audio and video products. The second is the inspection of IBM hard disk read/write heads for defects during manufacturing. We have...

  17. LITERATURE REVIEW AND REPORT: SURFACE-SEDIMENT ...

    Science.gov (United States)

    A literature review was conducted to identify available surface sediment sampling technologies with an ability to collect undisturbed sediments to depths of up to 1 meter below the water sediment interface. This survey was conducted using published literature and references, Environmental Protection Agency reports, professional sources, journal articles, internet web sites, sales brochures, and other sources as identified. For each piece of sampling equipment or sampling tool identified during the literature search, the following information was collected: general description of the equipment or tool, including its size, shape, weight, and composition; manufacturer's name, address, phone number, and email; a picture of the equipment or tool; the general mechanism of operation; sample volume collected; chemical and physical compatibility concerns; labor requirements; cost; and other requirements such as electrical power or specialized training. Sampling methodologies included in this investigation are grab or core types of sampling devices, as these types are most typically used in collecting surface sediments. In this review, 40 samplers were identified that included 13 grab samplers and 27 core samplers. Grab samplers included in the review are the Ponar, Birge-Ekman, Van Veen, Peterson, Mud Snapper, Scoopfish, Shipek, Smith-McIntyre, and others. Core samplers included in the review are the piston, splitcore, box, Vibracore, Mackereth, Ballchek, Craib, Gomex,

  18. Anisotropic reflectance characteristics of natural Earth surfaces.

    Science.gov (United States)

    Brennan, B; Bandeen, W R

    1970-02-01

    The patterns of reflection of solar radiation from cloud, water, and land surfaces were measured with an aircraft-borne medium resolution radiometer. Reflectances in the 0.2-4.0-micro and 0.55-0.85-micro portions of the electromagnetic spectrum were investigated. Results indicate that the reflectance characteristics of most of the surface types measured are anisotropic. The anisotropy is dependent on the type of surface and the angles of incidence and reflection. In general, the anisotropy increases with increasing solar zenith angle. Clouds and forests show similar reflectance patterns, with forward and backward scattering peaks. Ocean surfaces yield a pattern similar to those of the clouds and forests but with an additional peak which is associated with sun glitter. Reflectances measured in the 0.2-4.0-micro band are generally lower than those in the 0.55-0.85-micro band under cloudy conditions. Anisotropy and spectral bandwidth should be accounted for when computing the albedo of the earth from narrow field-of-view measurements from satellites; otherwise, large errors may be expected to occur.

  19. Lunar surface reflectance by LALT aboard KAGUYA

    Science.gov (United States)

    Noda, H.; Araki, H.; Ishihara, Y.; Tazawa, S.; Sasaki, S.; Kawano, N.

    2009-12-01

    The Laser Altimeter (LALT) aboard Japanese lunar explorer KAGUYA (SELENE) is a ranging instrument which measures the distance between the satellite and the lunar surface with accuracy of 1 m by detecting the timing delay of the reflected laser light. The main science goal of the LALT is to obtain the lunar global topographic data including polar regions for the study of the origin and the evolution of the Moon [1]. Besides, the LALT is equipped with an intensity monitor of the returned pulses. The intensity of the returned pulses contains information concerning surface roughness and reflectance of the footprints, which will contribute to the study of the lunar surface maturity and age. The reflectance at LALT wavelength (1064nm) is sensitive to the surface maturity and composition. The data should be particularly important at lunar polar regions where camera instruments should suffer from phase angle effects in the surface reflectance and moreover cannot obtain reflectance data at the permanently shadowed area. The normal operation of the LALT began on 30th, December 2007 after two months’ commissioning phase. Before the end of the normal operation phase in October 2008, the LALT measured more than 10 million range data. Unfortunately, due to the laser power decrease and also possible smaller surface reflectance than the expected value before launch (15 % at 1 micro meter), the return pulse intensity during the nominal mission phase is so small that they are not reliable enough to discuss the surface property. During the extended mission phase, which started November 2008, the satellite altitude decreased to 50 km. Due to the malfunction of the reaction wheel and high-voltage instruments were shutdown, the observation was suspended until 11th of February, 2009. LALT successfully resumed observation on 12th February and continued observation until the controlled crash of KAGUYA onto the Moon on 10th of June, 2009. Thanks to the lower orbit during this phase, the

  20. Surface composition of Mercury from reflectance spectrophotometry

    Science.gov (United States)

    Vilas, Faith

    1988-01-01

    The controversies surrounding the existing spectra of Mercury are discussed together with the various implications for interpretations of Mercury's surface composition. Special attention is given to the basic procedure used for reducing reflectance spectrophotometry data, the factors that must be accounted for in the reduction of these data, and the methodology for defining the portion of the surface contributing the greatest amount of light to an individual spectrum. The application of these methodologies to Mercury's spectra is presented.

  1. Reflectance spectroscopy and asteroid surface mineralogy

    International Nuclear Information System (INIS)

    Gaffey, M.J.; Bell, J.F.; Cruikshank, D.P.

    1989-01-01

    Information available from reflectance spectroscopy on the surface mineralogy of asteroids is discussed. Current spectral interpretive procedures used in the investigations of asteroid mineralogy are described. Present understanding of the nature and history of asteroids is discussed together with some still unresolved issues such as the source of ordinary chondrites. 100 refs

  2. Use of reflective surfaces on roadway embankment

    DEFF Research Database (Denmark)

    Jørgensen, Anders Stuhr; Doré, Guy

    2007-01-01

    Temperature measurements have been used to study the effect of two reflective surfaces on a roadway embankment in Forêt Montmorency, Québec, Canada. Both tested materials, Mapelastic (from MAPEI) and Colored Slurry (from Tech-Mix), have lead to a reduction in n-factor and proved to have very good...

  3. Conversion from surface wave to surface wave on reflection

    DEFF Research Database (Denmark)

    Novitsky, Andrey

    2010-01-01

    can be transmitted without changing its direction (nevertheless the amplitude varies). For other media parameters, only normally incident surface waves can be converted to surface waves. We propose applications of the predicted conversion as a beam splitter and polarization filter for surface waves.......We discuss the reflection and transmission of an incident surface wave to a pure surface wave state at another interface. This is allowed only for special media parameters: at least one of the media must be magnetic. We found such material characteristics that the obliquely incident surface wave...

  4. Simulation Tool for GNSS Ocean Surface Reflections

    DEFF Research Database (Denmark)

    Høeg, Per; von Benzon, Hans-Henrik; Durgonics, Tibor

    2015-01-01

    . This impedance concept gives an accurate lower boundary condition in the determination of the electromagnetic field, and makes itpossible to simulate reflections and the effects of transitions between different mediums. A semi-isotropic Philipsspectrum is used to represent the air-sea interaction.Simulated GPS...... on the solution of the parabolic equation. The parabolic equation in our simulator is solvedusing the split-step sine transformation. The Earth’s surface is modeled with the use of an impedance model. The value of the Earth impedance is given as a function of the range along the surface of the Earth...

  5. ASTER L2 Surface Reflectance SWIR and ASTER L2 Surface Reflectance VNIR V003

    Data.gov (United States)

    National Aeronautics and Space Administration — The ASTER L2 Surface Reflectance is a multi-file product that contains atmospherically corrected data for both the Visible Near-Infrared (VNIR) and Shortwave...

  6. Reduction of Glass Surface Reflectance by Ion Beam Surface Modification

    Energy Technology Data Exchange (ETDEWEB)

    Mark Spitzer

    2011-03-11

    This is the final report for DOE contract DE-EE0000590. The purpose of this work was to determine the feasibility of the reduction of the reflection from the front of solar photovoltaic modules. Reflection accounts for a power loss of approximately 4%. A solar module having an area of one square meter with an energy conversion efficiency of 18% generates approximately 180 watts. If reflection loss can be eliminated, the power output can be increased to 187 watts. Since conventional thin-film anti-reflection coatings do not have sufficient environmental stability, we investigated the feasibility of ion beam modification of the glass surface to obtain reduction of reflectance. Our findings are generally applicable to all solar modules that use glass encapsulation, as well as commercial float glass used in windows and other applications. Ion implantation of argon, fluorine, and xenon into commercial low-iron soda lime float glass, standard float glass, and borosilicate glass was studied by implantation, annealing, and measurement of reflectance. The three ions all affected reflectance. The most significant change was obtained by argon implantation into both low-iron and standard soda-lime glass. In this way samples were formed with reflectance lower than can be obtained with a single-layer coatings of magnesium fluoride. Integrated reflectance was reduced from 4% to 1% in low-iron soda lime glass typical of the glass used in solar modules. The reduction of reflectance of borosilicate glass was not as large; however borosilicate glass is not typically used in flat plate solar modules. Unlike conventional semiconductor ion implantation doping, glass reflectance reduction was found to be tolerant to large variations in implant dose, meaning that the process does not require high dopant uniformity. Additionally, glass implantation does not require mass analysis. Simple, high current ion implantation equipment can be developed for this process; however, before the process

  7. [Distributions of phosphorus fractions in suspended sediments and surface sediments of Tiaoxi mainstreams and cause analysis].

    Science.gov (United States)

    Chen, Hai-Long; Yuan, Xu-Yin; Wang, Huan; Li, Zheng-Yang; Xu, Hai-Yan

    2015-02-01

    Phosphorus is a primary nutrient showing the water quality status of river and inducing eutrophication, and a different phosphorus fraction can make diverse contributions to water quality. Four phosphorus forms of suspended sediments and surface sediments in Tiaoxi mainstreams were measured using a sequential extraction procedure, and the distributions of their forms were discussed. The results showed that the tropic status of Xitiaoxi River was inferior to that of Dongtiaoxi River as a whole, and the water quality in the middle reach of Dongtiaoxi River was better than that in the upper and lower reaches. The contents of nutrient elements in suspended sediments were significantly higher than those in surface sediment, which indicated an enrichment of nutrient in fine sediment. The percentages of the loosely absorbed phosphorus ( NH4Cl-P), the reductant phosphorus (BD-P) and the metal oxide bound phosphorus (NaOH-P) in the suspended sediment were higher than those in surface sediment, while the percentage of the calcium bound phosphorus (HCl-P) showed a reverse trend. Correlation analyses between phosphorus forms and chemical compositions of suspended sediments and surface sediments were performed. The results showed the phosphorus forms in suspended sediments and surface sediments of Xitiaoxi River had weak relationships with mineral components, while those in the Dongtiaoxi River had strong relationships with mineral, especially OM and clay mineral. The cause was associated with the geological setting and material sources in Tiaoxi watershed.

  8. The reflective surface of the MAGIC telescope

    Science.gov (United States)

    Doro, M.; Bastieri, D.; Biland, A.; Dazzi, F.; Font, L.; Garczarczyk, M.; Ghigo, M.; Giro, E.; Goebel, F.; Kosyra, R.; Lorenz, E.; Mariotti, M.; Mirzoyan, R.; Peruzzo, L.; Pareschi, G.; Zapatero, J.

    2008-09-01

    The atmospheric Cherenkov telescope MAGIC for ground-based gamma-ray astronomy is operating since late 2003 on the Canary island of La Palma. Its 17 m diameter mirror is composed of 964 square all-aluminum mirrors of ˜0.5m side, making up a parabola of 236 m2 area. Each mirror is composed of a sandwich of two thin aluminum layers interspaced by a honeycomb structure that ensures rigidity, high temperature conductivity and low weight. The surface of each raw blank is diamond milled to provide high reflectivity and a slightly different focal length to fit the overall parabolic shape of the reflector. We report about the stability and performance of the surface exposed to the atmosphere for over 3 years. For the construction of the clone of the first telescope, dubbed MAGIC II, major improvements of the design and performance of the reflective surface were required. Given the good experience with aluminum mirrors, a similar assembly was tested, but the area was increased to 1 m2, which allowed to skip the inter-alignment of four mirrors within a panel and to reduce substantially the weight. The increased rigidity of the mirror unit resulted in an improved focussing quality. In addition, a second class of mirrors will be installed in the outermost part of the reflector, namely glass mirrors obtained by cold-slumping replica technique. Details on the construction of both type MAGIC II new mirrors and the 17 m reflector will be presented.

  9. Sediment Transport Model for a Surface Irrigation System

    OpenAIRE

    Mailapalli, Damodhara R.; Raghuwanshi, Narendra S.; Singh, Rajendra

    2013-01-01

    Controlling irrigation-induced soil erosion is one of the important issues of irrigation management and surface water impairment. Irrigation models are useful in managing the irrigation and the associated ill effects on agricultural environment. In this paper, a physically based surface irrigation model was developed to predict sediment transport in irrigated furrows by integrating an irrigation hydraulic model with a quasi-steady state sediment transport model to predict sediment load in fur...

  10. Formation of Reflecting Surfaces Based on Spline Methods

    Science.gov (United States)

    Zamyatin, A. V.; Zamyatina, E. A.

    2017-11-01

    The article deals with problem of reflecting barriers surfaces generation by spline methods. The cases of reflection when a geometric model is applied are considered. The surfaces of reflecting barriers are formed in such a way that they contain given points and the rays reflected at these points and hit at the defined points of specified surface. The reflecting barrier surface is formed by cubic splines. It enables a comparatively simple implementation of proposed algorithms in the form of software applications. The algorithms developed in the article can be applied in architecture and construction design for reflecting surface generation in optics and acoustics providing the geometrical model of reflex processes is used correctly.

  11. Sediment Transport Model for a Surface Irrigation System

    Directory of Open Access Journals (Sweden)

    Damodhara R. Mailapalli

    2013-01-01

    Full Text Available Controlling irrigation-induced soil erosion is one of the important issues of irrigation management and surface water impairment. Irrigation models are useful in managing the irrigation and the associated ill effects on agricultural environment. In this paper, a physically based surface irrigation model was developed to predict sediment transport in irrigated furrows by integrating an irrigation hydraulic model with a quasi-steady state sediment transport model to predict sediment load in furrow irrigation. The irrigation hydraulic model simulates flow in a furrow irrigation system using the analytically solved zero-inertial overland flow equations and 1D-Green-Ampt, 2D-Fok, and Kostiakov-Lewis infiltration equations. Performance of the sediment transport model was evaluated for bare and cropped furrow fields. The results indicated that the sediment transport model can predict the initial sediment rate adequately, but the simulated sediment rate was less accurate for the later part of the irrigation event. Sensitivity analysis of the parameters of the sediment module showed that the soil erodibility coefficient was the most influential parameter for determining sediment load in furrow irrigation. The developed modeling tool can be used as a water management tool for mitigating sediment loss from the surface irrigated fields.

  12. Sediment plume response to surface melting and supraglacial lake drainages on the Greenland ice sheet

    DEFF Research Database (Denmark)

    Chu, Vena W.; Smith, Laurence C; Rennermalm, Asa K.

    2009-01-01

    of a downstream sediment plume in Kangerlussuaq Fjord by comparing: (1) plume area and suspended sediment concentration from Moderate Resolution Imaging Spectroradiometer (MODIS) imagery and field data; (2) ice-sheet melt extent from Special Sensor Microwave/Imager (SSM/I) passive microwave data; and (3......) supraglacial lake drainage events from MODIS. Results confirm that the origin of the sediment plume is meltwater release from the ice sheet. Interannual variations in plume area reflect interannual variations in surface melting. Plumes appear almost immediately with seasonal surface-melt onset, provided...... the estuary is free of landfast sea ice. A seasonal hysteresis between melt extent and plume area suggests late-season exhaustion in sediment supply. Analysis of plume sensitivity to supraglacial events is less conclusive, with 69% of melt pulses and 38% of lake drainage events triggering an increase in plume...

  13. HEAVY METALS IN SURFACE MUD SEDIMENT IN EKATERINBURG (RUSSIA

    Directory of Open Access Journals (Sweden)

    A. A. Seleznev

    2018-03-01

    Full Text Available Problem Statement. Now the most part of the world’s population lives in cities, thus, it is relevant the search for universal, low-cost and express methods for environmental geochemical investigations of an urban environment. The objective of the study is the assessment of content and properties of surface mud sediment at the urban territory (on the example of Ekaterinburg, Russia. Methods of the study. The 30 samples of surface mud sediment, soils and ground were collected in the residential area of the city. Particle size composition, measurements of heavy metals content, correlation analysis was conducted for the samples. Results. Surface mud sediment at the residential territories can be classified as surface facie of the recent anthropogenic sediment. Samples of the environmental compartments were collected at the territories of six blocks of houses of various years of construction, located in various parts of the city and at the various geological units. Five samples were collected in each block: 3 samples within the block and 2 samples – outside. The content of Pb, Zn, Cu, Ni, Co, and Mn was measured in particle size fractions of the samples. Particle size composition of the surface mud sediment in Ekaterinburg is similar to the particle size composition of the grounds formed on the sediments of Holocene age in Urals region. The positive statistically significant correlation was found between the couples of metals: Zn and Pb, Zn and Cu, Co and Ni. The distribution of concentrations of Pb, Zn and Cu over particle size fractions of surface mud sediment is heterogeneous. Pollution of the ground and soil in urban areas is due to the transition of heavy metals with particles of dust and fine sand. Typical geochemical association of metals for particle size fraction of surface mud sediment 0.002–0.01 mm – Mn-Zn-Ni-Cu-Pb-Co, that is similar to the association for sediments of surface puddles in local zones of relief, soils and bottom

  14. Modern sedimentation patterns in Laguna de Medina, Southern Spain, derived from lake surface and soil samples

    Science.gov (United States)

    van ´t Hoff, Jasmijn; Schröder, Tabea; Reicherter, Klaus; Held, Peter; Melles, Martin

    2016-04-01

    In September 2014 and March 2015, a 25.66 m long sediment core (Co1313) was retrieved from the centre of Laguna de Medina, a small endorheic salt lake in Cádiz, SW Spain. This record covers the last 9.000 years, thus providing an unique archive for Holocene climatic and environmental changes with extraordinary high temporal resolution. For a better understanding of the palaeoenvironmental proxies to be analysed on the sediment core, the modern processes of sediment formation in the lake and its catchment under known environmental conditions were investigated on a set of 46 lake sediment surface samples and 32 soil surface sediment samples from the lake and the close surroundings, respectively. These samples were analysed for bulk mineralogy (XRD), chemical composition (XRF), grain-size distribution (laser scanner), and carbonate, total organic carbon (TOC), nitrogen (TN) and sulphur (TS) contents (elemental analyser). Based on the mineralogical, geochemical and granulometrical data, the lake can be divided into four zones. The northern shore is characterized by particularly high quartz contents and coarse grain sizes. This reflects input from ancient terraces of the Guadalete River that are exposed in that area. The southern shore is characterised by high calcite contents due to sediment supply from the Cretaceous ´Capas rojaś, a series of Subbetic deep-water marl- and limestones. The southeastern and to a lesser extend the northwestern shores show particularly high dolomite contents, reflecting the Triassic dolomites outcroping in the southeastern catchment. The southeastern shore furthermore is also influenced by strong terrestrial input of the Triassic Keuper facies from the most important inlet, Arroyo Fuente Bermeja, as reflected by high contents of Ti, K, Al, Fe, Rb in the lake sediments. The last zone comprises only a small part of the western shore and is characterized by a relatively high gypsum amount. This does not reflect the geology in the catchment

  15. Simulating Sediment Sorting of Streambed Surfaces - It's the Supply, Stupid

    Science.gov (United States)

    Wilcock, P. R.

    2014-12-01

    The grain size of the streambed surface is an integral part of the transport system because it represents the grains immediately available for transport. If the rate and size of grains entrained from the bed surface differ from that delivered to the bed surface, the bed surface grain size will change. Although this balance is intuitively clear, its implications can surprise. The relative mobility of different sizes in a mixture change as transport rates increase. At small transport rates, smaller sizes are more mobile. As transport rate increases, the transport grain size approaches that of the bed. This presents a dilemma when using flumes to simulate surface sorting and transport. When sediment is fed into a flume, the same sediment is typically used regardless of feed rate. The transport grain size remains constant at all rates, which does not match the pattern observed in the field. This operational constraint means that sediment supply is coarser than transport capacity in feed flumes, increasingly so as transport rates diminish. This imbalance drives a coarsening of the stream bed as less mobile coarse grains concentrate on the surface as the system approaches steady-state. If sediment is recirculated in a flume, sediment supply and entrainment are perfectly matched. Surface coarsening is not imposed, but does occur via kinematic sieving. The coarsening of the transport (and supply) accommodates the rate-dependent change in mobility such that the bed surface grain size does not change with transport rate. Streambed armoring depends on both the rate and grain size of sediment supply - their implications do not seem to be fully appreciated. A coarsened bed surface does not indicate sorting of the bed surface during waning flows - it can persist with active sediment supply and transport. Neither sediment feed nor sediment recirculating flumes accurately mimic natural conditions but instead represent end members that bracket the dynamics of natural streams

  16. [Surface physicochemical and fractal characteristics of sediments in desilting basin from Yellow River diversion reservoir].

    Science.gov (United States)

    Hu, Kang-Bo; Wang, Yi-Li; Li, Jun-Qing; Gui, Ping; Jiang, Yan-Ling

    2011-07-01

    Surface morphology and pore surface fractal characteristics of the sediment in the desilting basin of Queshan Reservoir were studied. Six sediment samples were collected and particle size, morphology, pore structure and fractal characteristics, surface elements distribution were analyzed as well. The objectives of this study were to investigate the reason for the differences among the pore surface fractal dimensions and fractal scales on the basis of different models, and discuss the effect of surface morphology of these sediment particles on their surface elements distribution. The results showed that these sediment particles with average diameter of 18-83 microm were mainly composed of clay, silt and fine sand. Their complex surface morphology and pore size distribution were reflected by wide range of the BET surface area (8.248-31.60 m2/g), average pore diameter (3.977-7.850 nm) and pore-size distribution (1.870-60.78 nm). Although the pore surface fractal dimensions (D(s)), based on fractal FHH or thermodynamic models, were 2.67-2.89, and their fractal scales generally ranged from several nanometers to tens of nanometers, the differences were still observed in D(s) values calculated from above two models because of inhomogeneity in surface pore size distribution. Therefore, the D(s) based on pore-size distribution were 2.12-2.60, these values close to D(s) calculated from fractal FHH models revealed that pore-size distribution could contribute significantly to D(s) calculation. In addition, the heterogeneous surface adsorption sites of these sediment particles caused by much complex surface morphology had strong influence on the each element distribution on the particle surface.

  17. Surface sediment characteristics and tower karst dissolution, Guilin, southern China

    Science.gov (United States)

    Tang, Tao

    2003-01-01

    Dissolution of extensive outcrops of limestone and dolostone in humid tropical and subtropical southern China produced numerous caves and residual hills that are referred as tower karst. This study identifies and relates the physical and chemical characteristics of the surface sediment with the limestone bedrock in Guilin to assess the influence of the limestone dissolution process on sediment composition. The results of this study indicated that (i) both limestone and dolostone of the region are very pure (99.5% and 98.5% of CaCO 3 and MgCO 3, respectively); (ii) the material composition of limestone and dolostone is different from that of soil and sediment of the region: constituents of surface sediments are highly related with the clastic sedimentary rocks, such as the mudstone, but show negative correlation with limestone and dolostone; (iii) the limestone formations are highly resistant to physical weathering and disintegration; their durability versus physical weathering and their high susceptibility to chemical dissolution account for why residual towers can form and persist; (iv) a dual-zone environmental structure exists vertically downward from the surface in Guilin: the zone of unconsolidated clastic sediments that is predominantly acidic, and the zone of karstified limestone that is predominantly basic. The evidence suggests that the environment and processes differ in these two zones. The chemical dissolution of limestone that formed tower karst of the region is not mainly responsible for the accumulation of clastic sediment on the surface.

  18. Infrared spectral reflectances of asteroid surfaces

    Science.gov (United States)

    Larson, H. P.; Veeder, G. J.

    1979-01-01

    This review compares the types of compositional information produced by three complementary techniques used in infrared observations of asteroid surfaces: broadband JHKL photometry, narrow band photometry, and multiplex spectroscopy. The high information content of these infrared observations permits definitive interpretations of asteroid surface compositions in terms of the major meteoritic minerals (olivine, pyroxene, plagioclase feldspar, hydrous silicates, and metallic Ni-Fe). These studies emphasize the individuality of asteroid surface compositions, the inadequacy of simple comparisons with spectra of meteorites, and the need to coordinate spectral measurements of all types to optimize diagnostic capabilities.

  19. Fine and coarse components in surface sediments from Bikini Lagoon

    Energy Technology Data Exchange (ETDEWEB)

    Noshkin, V. E., LLNL

    1997-01-01

    In 1979, 21 years after the moratorium on nuclear testing in the Marshall Islands, surface sediment samples (to depths of 2 and 4 cm) were collected from 87 locations in the lagoon of Bikini Atoll, one of the two sites in the Marshall Islands used by the United States to test nuclear devices from 1946 through 1958. The main purpose for the collections was to map the distribution of long-lived man-made radionuclides associated with the bottom material. In addition the samples were processed to estimate the fraction of fine and coarse components to show, by comparison, what modifications occurred in the composition since the sediments were first described in samples collected before testing in 1946. Nuclear testing produced more finely divided material that is now found in the surface sediment layer over large areas of the lagoon and especially in regions of the lagoon and reef adjacent to test sites. The 5 cratering events alone at Bikini Atoll redistributed sufficient material to account for the higher inventory of fine material found over the surface 4 cm of the sediment of the lagoon. Although the fraction of fine material in the bottom sediments was altered by the nuclear events, the combined processes of formation, transport and deposition were not sufficiently dynamic to greatly change the general geographical features of the major sedimentary components over most of the lagoon floor.

  20. Measuring the role of seagrasses in regulating sediment surface elevation.

    Science.gov (United States)

    Potouroglou, Maria; Bull, James C; Krauss, Ken W; Kennedy, Hilary A; Fusi, Marco; Daffonchio, Daniele; Mangora, Mwita M; Githaiga, Michael N; Diele, Karen; Huxham, Mark

    2017-09-20

    Seagrass meadows provide numerous ecosystem services and their rapid global loss may reduce human welfare as well as ecological integrity. In common with the other 'blue carbon' habitats (mangroves and tidal marshes) seagrasses are thought to provide coastal defence and encourage sediment stabilisation and surface elevation. A sophisticated understanding of sediment elevation dynamics in mangroves and tidal marshes has been gained by monitoring a wide range of different sites, located in varying hydrogeomorphological conditions over long periods. In contrast, similar evidence for seagrasses is sparse; the present study is a contribution towards filling this gap. Surface elevation change pins were deployed in four locations, Scotland, Kenya, Tanzania and Saudi Arabia, in both seagrass and unvegetated control plots in the low intertidal and shallow subtidal zone. The presence of seagrass had a highly significant, positive impact on surface elevation at all sites. Combined data from the current work and the literature show an average difference of 31 mm per year in elevation rates between vegetated and unvegetated areas, which emphasizes the important contribution of seagrass in facilitating sediment surface elevation and reducing erosion. This paper presents the first multi-site study for sediment surface elevation in seagrasses in different settings and species.

  1. Measuring the role of seagrasses in regulating sediment surface elevation

    KAUST Repository

    Potouroglou, Maria

    2017-09-13

    Seagrass meadows provide numerous ecosystem services and their rapid global loss may reduce human welfare as well as ecological integrity. In common with the other \\'blue carbon\\' habitats (mangroves and tidal marshes) seagrasses are thought to provide coastal defence and encourage sediment stabilisation and surface elevation. A sophisticated understanding of sediment elevation dynamics in mangroves and tidal marshes has been gained by monitoring a wide range of different sites, located in varying hydrogeomorphological conditions over long periods. In contrast, similar evidence for seagrasses is sparse; the present study is a contribution towards filling this gap. Surface elevation change pins were deployed in four locations, Scotland, Kenya, Tanzania and Saudi Arabia, in both seagrass and unvegetated control plots in the low intertidal and shallow subtidal zone. The presence of seagrass had a highly significant, positive impact on surface elevation at all sites. Combined data from the current work and the literature show an average difference of 31 mm per year in elevation rates between vegetated and unvegetated areas, which emphasizes the important contribution of seagrass in facilitating sediment surface elevation and reducing erosion. This paper presents the first multi-site study for sediment surface elevation in seagrasses in different settings and species.

  2. Pesticides distribution in surface waters and sediments of lotic and ...

    African Journals Online (AJOL)

    An investigation on the availability and distribution of Lindane (HCHs) and Total organochlorine phosphate (TOCP) in the surface waters and sediments of selected water bodies in Agbede wetlands was carried out from December, 2012 to May, 2014 in order to cover seasonal trends in both matrixes. A Gas Chromatograph ...

  3. Assessment of heavy metals pollution in sediments and surface ...

    African Journals Online (AJOL)

    Samples were analyzed for their concentrations of these metals, using the atomic absorption spectrophotometer (AAS). The results of heavy metals show that the average contents of Fe (5.3%), Cr (70 ppm), Cd (0.4ppm) and Co (40ppm) in surface sediments are only slightly higher than corresponding contents in body core ...

  4. Method and apparatus for aligning laser reflective surfaces

    International Nuclear Information System (INIS)

    Caruolo, A.B.; Davis, J.W.; Walch, A.P.

    1975-01-01

    Methods and apparatus used in the alignment of high power laser systems to obtain optimum performance are disclosed. An external source of visible radiation provides an alignment beam which is reflected along the axis of a resonator. Reflecting surfaces of the resonator are aligned with respect to the axis located by the visible beam

  5. Estimating surface reflectance from Himawari-8/AHI reflectance channels Using 6SV

    Science.gov (United States)

    Lee, Kyeong-sang; Choi, Sungwon; Seo, Minji; Seong, Noh-hun; Han, Kyung-soo

    2017-04-01

    TOA (Top Of Atmospheric) reflectance observed by satellite is modified by the influence of atmosphere such as absorbing and scattering by molecular and gasses. Removing TOA reflectance attenuation which is caused by the atmospheric is essential. surface reflectance with compensated atmospheric effects used as important input data for land product such as Normalized Difference Vegetation Index (NDVI), Land Surface Albedo (LSA) and etc. In this study, we Second Simulation of a Satellite Signal in the Solar Spectrum Vector (6SV) Radiative Transfer Model (RTM) for atmospheric correction and estimating surface reflectance from Himawari-8/Advanced Himawari Imager (AHI) reflectance channels. 6SV has the advantage that it has high accuracy by performing the atmospheric correction by dividing the width of the satellite channel by 2.5 nm, but it is slow to use in the operation. So, we use LUT approach to reduce the computation time and avoid the intensive calculation required for retrieving surface reflectance. Estimated surface reflectance data were compared with PROBA-V S1 data to evaluate the accuracy. As a result Root Mean Square Error (RMSE) and bias were about 0.05 and -0.02. It is considered that this error is due to the difference of angle component and Spectral Response Function (SRF) of each channel.

  6. 100% reflectivity from a monolithic dielectric microstructured surface

    OpenAIRE

    Brückner, F.; Clausnitzer, T.; Burmeister, O.; Friedrich, D.; Kley, E.; Danzmann, K.; Tünnermann, A.; Schnabel, R.

    2008-01-01

    Here, we propose a new mirror architecture which is solely based upon a monolithic dielectric micro-structured surface. Hence, the mirror device, which consists of a possibly mono-crystalline bulk material, can in principle simultaneously provide perfect reflectivity and lowest mechanical loss. By specifically structuring the monolithic surface, resulting in T-shaped ridges of a subwavelength grating, a resonant behavior of light coupling can be realized, leading to theoretically 100% reflect...

  7. Diffuse reflection of ultracold neutrons from low-roughness surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Atchison, F.; Daum, M.; Henneck, R.; Horisberger, M.; Kirch, K.; Lauss, B.; Mtchedlishvili, A.; Meier, M.; Petzoldt, G.; Schelldorfer, R.; Zsigmond, G. [Paul Scherrer Institut, PSI, Villigen (Switzerland); Heule, S.; Knecht, A. [Paul Scherrer Institut, PSI, Villigen (Switzerland); University Zuerich, Zuerich (Switzerland); Kasprzak, M. [Paul Scherrer Institut, PSI, Villigen (Switzerland); Stefan Meyer Institut, Vienna (Austria); Kuzniak, M. [Paul Scherrer Institut, PSI, Villigen (Switzerland); Jagiellonian University, Smoluchowski Institute of Physics, Cracow (Poland); Plonka-Spehr, C. [Institut Laue Langevin, ILL, Grenoble (France); Straumann, U. [University Zuerich, Zuerich (Switzerland)

    2010-04-15

    We report a measurement of the reflection of ultracold neutrons from flat, large-area plates of different Fermi potential materials with low surface roughness. The results were used to test two diffuse reflection models, the well-known Lambert model and the micro-roughness model which is based on wave scattering. The Lambert model fails to reproduce the diffuse reflection data. The surface roughness b and correlation length w, obtained by fitting the micro-roughness model to the data are in the range 1{<=}b{<=}3 nm and 10{<=}w{<=}120 nm, in qualitative agreement with independent measurements using atomic force microscopy. (orig.)

  8. Diffuse reflection of ultracold neutrons from low-roughness surfaces

    International Nuclear Information System (INIS)

    Atchison, F.; Daum, M.; Henneck, R.; Horisberger, M.; Kirch, K.; Lauss, B.; Mtchedlishvili, A.; Meier, M.; Petzoldt, G.; Schelldorfer, R.; Zsigmond, G.; Heule, S.; Knecht, A.; Kasprzak, M.; Kuzniak, M.; Plonka-Spehr, C.; Straumann, U.

    2010-01-01

    We report a measurement of the reflection of ultracold neutrons from flat, large-area plates of different Fermi potential materials with low surface roughness. The results were used to test two diffuse reflection models, the well-known Lambert model and the micro-roughness model which is based on wave scattering. The Lambert model fails to reproduce the diffuse reflection data. The surface roughness b and correlation length w, obtained by fitting the micro-roughness model to the data are in the range 1≤b≤3 nm and 10≤w≤120 nm, in qualitative agreement with independent measurements using atomic force microscopy. (orig.)

  9. On the reflection point where light reflects to a known destination on quadratic surfaces.

    Science.gov (United States)

    Gonçalves, Nuno

    2010-01-15

    We address the problem of determining the reflection point on a specular surface where a light ray that travels from a source to a target is reflected. The specular surfaces considered are those expressed by a quadratic equation. So far, there is no closed form explicit equation for the general solution of this determination of the reflection point, and the usual approach is to use the Snell law or the Fermat principle whose equations are derived in multidimensional nonlinear minimizations. We prove in this Letter that one can impose a set of three restrictions to the reflection point that can impose a set of three restrictions that culminates in a very elegant formalism of searching the reflection point in a unidimensional curve in space. This curve is the intersection of two quadratic equations. Some applications of this framework are also discussed.

  10. A light reflecting apparatus including a multi-aberration light reflecting surface

    Science.gov (United States)

    Sawicki, R.H.; Sweatt, W.

    1985-11-21

    A light reflecting apparatus including a multi-aberration bendable light reflecting surface is disclosed herein. This apparatus includes a structural assembly comprised of a rectangular plate which is resiliently bendable, to a limited extent, and which has a front side defining the multi-aberration light reflecting surface and an opposite back side, and a plurality of straight leg members rigidly connected with the back side of the plate and extending rearwardly therefrom. The apparatus also includes a number of different adjustment mechanisms, each of which is connected with specific ones of the leg members. These mechanisms are adjustably movable in different ways for applying corresponding forces to the leg members in order to bend the rectangular plate and light reflecting surface into different predetermined curvatures and which specifically include quadratic and cubic curvatures corresponding to different optical aberrations.

  11. Laboratory and field measurements of upwelled radiance and reflectance spectra of suspended James River sediments near Hopewell, Virginia

    Science.gov (United States)

    Whilock, C. H.; Witte, W. G.; Gurganus, E. A.; Usry, J. W.

    1978-01-01

    Spectral reflectance characteristics of suspended Bermuda Hundred and Bailey Bay bottom sediments taken from the Hopewell, Va., area were measured in the laboratory for water mixture total suspended solids concentrations between 4 and 173 parts per million. Field spectral reflectance measurements were made of the James River waters near Bermuda Hundred on two occasions. The results of these tests indicate that both Bermuda Hundred and Bailey Bay suspended sediments produce their strongest reflectance in the green and red regions of the spectrum.

  12. Sediment mineralogy based on visible and near-infrared reflectance spectroscopy

    Science.gov (United States)

    Jarrard, R.D.; Vanden Berg, M.D.; ,

    2006-01-01

    Visible and near-infrared spectroscopy (VNIS) can be used to measure reflectance spectra (wavelength 350-2500 nm) for sediment cores and samples. A local ground-truth calibration of spectral features to mineral percentages is calculated by measuring reflectance spectra for a suite of samples of known mineralogy. This approach has been tested on powders, core plugs and split cores, and we conclude that it works well on all three, unless pore water is present. Initial VNIS studies have concentrated on determination of relative proportions of carbonate, opal, smectite and illite in equatorial Pacific sediments. Shipboard VNIS-based determination of these four components was demonstrated on Ocean Drilling Program Leg 199. ?? The Geological Society of London 2006.

  13. Reflection properties of hydrogen ions at helium irradiated tungsten surfaces

    International Nuclear Information System (INIS)

    Doi, K; Tawada, Y; Kato, S; Sasao, M; Kenmotsu, T; Wada, M; Lee, H T; Ueda, Y; Tanaka, N; Kisaki, M; Nishiura, M; Matsumoto, Y; Yamaoka, H

    2016-01-01

    Nanostructured W surfaces prepared by He bombardment exhibit characteristic angular distributions of hydrogen ion reflection upon injection of 1 keV H + beam. A magnetic momentum analyzer that can move in the vacuum chamber has measured the angular dependence of the intensity and the energy of reflected ions. Broader angular distributions were observed for He-irradiated tungsten samples compared with that of the intrinsic polycrystalline W. Both intensity and energy of reflected ions decreased in the following order: the polycrystalline W, the He-bubble containing W, and the fuzz W. Classical trajectory Monte Carlo simulations based on Atomic Collision in Amorphous Target code suggests that lower atom density near the surface can make the reflection coefficients lower due to increasing number of collisions. (paper)

  14. Reflection characteristics of a composite planar AMC surface

    Directory of Open Access Journals (Sweden)

    Ruey-Bing Hwang

    2012-03-01

    Full Text Available This study investigates the reflection characteristics of a composite Artificial Magnetic Conductor (AMC surface consisting of multiple orthogonal gradient AMC surfaces arranged in a two-dimensional periodic pattern. The gradient AMC surface in this study consists of square metal patches of variable size printed on a grounded dielectric substrate. Due to the orthogonal placement of the gradient AMC surface, the incident energy of a plane wave normally incident on the composite AMC surface will be reflected into four major lobes away from the impinging direction. To achieve a systematical design, a simple formula based on array antenna theory was developed to determine the reflection pattern of the gradient AMC surface illuminated by a normal incident plane wave. A time-domain full-wave simulation was also carried out to calculate the electromagnetic fields in the structure and the far-field patterns. The scattering patterns of the structure were measured in an electromagnetic anechoic chamber. Results confirm the design principle and procedures in this research. Since such a composite AMC surface can be easily fabricated using the standard printed circuit board technique without via-hole process, it may have potential applications in beam-steering and radar cross section reduction.

  15. Relationship between microstructure of the skin surface and surface reflection based on geometric optics.

    Science.gov (United States)

    Yoshida, Kenichiro; Miyaki, Masahiro; Ojima, Nobutoshi; Iwata, Kayoko

    2012-06-01

    The behavior of reflected light in skin affects skin appearance and provides clues as to the internal condition of the skin. Surface topography is one of the central physical factors contributing to surface reflection. We tried to clarify the relationship between microstructure of the skin surface and surface reflection based on geometric optics. Microstructures and surface reflections in the left cheeks of adult females were evaluated. Skin topography was acquired measuring replicas using confocal laser microscopy. Surface topography was used to calculate arithmetical mean deviation of the surface (S(a)), and geometric index from gradient of the surface (S(grad)), which is expected to correlate with the directionality of surface reflection (DoSR) based on geometric optics. A surface reflection image was acquired from differently polarized pictures of a face, and the index of surface reflection (I(obs)) was calculated as the average pixel value of the area of shine. Correlations between indices were then evaluated. S(grad) and S(a) showed significant correlation (preflection from the reflection model than S(a). In addition, S(grad) can explain differences in DoSR for some panelists even in the case of an identical S(a). The topographic element involved in DoSR was extracted from height mapping. S(grad) reflects the ratio of flat area, offering a more effective indicator than S(a) for distinguishing topographic characteristics with respect to surface reflection. Copyright © 2012 Japanese Society for Investigative Dermatology. Published by Elsevier Ireland Ltd. All rights reserved.

  16. Variation and significance of surface heat after the mechanical sand control of Qinghai–Tibet Railway was covered with sandy sediments

    Directory of Open Access Journals (Sweden)

    Shengbo Xie

    Full Text Available Mechanical control of drifting sand used to protect the Qinghai–Tibet Railway from sand damage inevitably results in sand deposition, and the change in radiation and heat flux after the ground surface is covered with sandy sediments remains unclear. These variations were studied in this work through field observations along with laboratory analyses and tests. After the ground surface was covered with sandy sediments produced by the mechanical control of sand in the Qinghai–Tibet Railway, the reflectivity increased, and the annual average reflectivity on the surface covered with sandy sediments was higher than that without sandy sediments, with the value increasing by 0.043. Moreover, the surface shortwave radiation increased, whereas the surface net radiation decreased. The annual average value of the surface shortwave radiant flux density on the sandy sediments was higher than that without sandy sediments, with the value increasing by 7.291 W·m−2. The annual average value of the surface net radiant flux density on the sandy sediments decreased by 9.639 W·m−2 compared with that without sandy sediments. The soil heat flux also decreased, and the annual average value of the heat flux in the sandy sediments decreased by 0.375 W·m−2 compared with that without sandy sediments. These variations caused the heat source on the surface of sandy sediments underground to decrease, which is beneficial for preventing permafrost from degradation in the section of sand control of the railway. Keywords: Mechanical control of sand, Sand depositions, Surface radiation, Heat flux, Qinghai–Tibet Railway

  17. Quality Assessment of Landsat Surface Reflectance Products Using MODIS Data

    Science.gov (United States)

    Feng, Min; Huang, Chengquan; Channan, Saurabh; Vermote, Eric; Masek, Jeffrey G.; Townshend, John R.

    2012-01-01

    Surface reflectance adjusted for atmospheric effects is a primary input for land cover change detection and for developing many higher level surface geophysical parameters. With the development of automated atmospheric correction algorithms, it is now feasible to produce large quantities of surface reflectance products using Landsat images. Validation of these products requires in situ measurements, which either do not exist or are difficult to obtain for most Landsat images. The surface reflectance products derived using data acquired by the Moderate Resolution Imaging Spectroradiometer (MODIS), however, have been validated more comprehensively. Because the MODIS on the Terra platform and the Landsat 7 are only half an hour apart following the same orbit, and each of the 6 Landsat spectral bands overlaps with a MODIS band, good agreements between MODIS and Landsat surface reflectance values can be considered indicators of the reliability of the Landsat products, while disagreements may suggest potential quality problems that need to be further investigated. Here we develop a system called Landsat-MODIS Consistency Checking System (LMCCS). This system automatically matches Landsat data with MODIS observations acquired on the same date over the same locations and uses them to calculate a set of agreement metrics. To maximize its portability, Java and open-source libraries were used in developing this system, and object-oriented programming (OOP) principles were followed to make it more flexible for future expansion. As a highly automated system designed to run as a stand-alone package or as a component of other Landsat data processing systems, this system can be used to assess the quality of essentially every Landsat surface reflectance image where spatially and temporally matching MODIS data are available. The effectiveness of this system was demonstrated using it to assess preliminary surface reflectance products derived using the Global Land Survey (GLS) Landsat

  18. An instrument for the measurement of road surface reflection properties

    DEFF Research Database (Denmark)

    Corell, Dennis Dan; Sørensen, K.

    2017-01-01

    Road surface reflection data in the form of standard r-tables serve as input for design calculations of road lighting installations on traffic roads. However, in several countries the use of the standard r-tables has not been verified by measurement in a long period of time, while the types of road...

  19. Quality-factor and reflection-coefficient estimation using reflected surface waves

    NARCIS (Netherlands)

    Draganov, D.S.; Ruigrok, E.N.; Ghose, R.; Mikesell, D.; Van Wijk, K.

    2014-01-01

    We propose a method for estimating the reflection coefficient of a subvertical boundary and the the quality factor of the medium between a receiver and the subvertical boundary. The method uses surface waves from transient deterministic sources and is inspired by the occurrence of non-physical

  20. Copper-assisted, anti-reflection etching of silicon surfaces

    Science.gov (United States)

    Toor, Fatima; Branz, Howard

    2014-08-26

    A method (300) for etching a silicon surface (116) to reduce reflectivity. The method (300) includes electroless deposition of copper nanoparticles about 20 nanometers in size on the silicon surface (116), with a particle-to-particle spacing of 3 to 8 nanometers. The method (300) includes positioning (310) the substrate (112) with a silicon surface (116) into a vessel (122). The vessel (122) is filled (340) with a volume of an etching solution (124) so as to cover the silicon surface (116). The etching solution (124) includes an oxidant-etchant solution (146), e.g., an aqueous solution of hydrofluoric acid and hydrogen peroxide. The silicon surface (116) is etched (350) by agitating the etching solution (124) with, for example, ultrasonic agitation, and the etching may include heating (360) the etching solution (124) and directing light (365) onto the silicon surface (116). During the etching, copper nanoparticles enhance or drive the etching process.

  1. Mercury's Surface Magnetic Field Determined from Proton-Reflection Magnetometry

    Science.gov (United States)

    Winslow, Reka M.; Johnson, Catherine L.; Anderson, Brian J.; Gershman, Daniel J.; Raines, Jim M.; Lillis, Robert J.; Korth, Haje; Slavin, James A.; Solomon, Sean C.; Zurbuchen, Thomas H.; hide

    2014-01-01

    Solar wind protons observed by the MESSENGER spacecraft in orbit about Mercury exhibit signatures of precipitation loss to Mercury's surface. We apply proton-reflection magnetometry to sense Mercury's surface magnetic field intensity in the planet's northern and southern hemispheres. The results are consistent with a dipole field offset to the north and show that the technique may be used to resolve regional-scale fields at the surface. The proton loss cones indicate persistent ion precipitation to the surface in the northern magnetospheric cusp region and in the southern hemisphere at low nightside latitudes. The latter observation implies that most of the surface in Mercury's southern hemisphere is continuously bombarded by plasma, in contrast with the premise that the global magnetic field largely protects the planetary surface from the solar wind.

  2. Excitations of surface plasmon polaritons by attenuated total reflection, revisited

    International Nuclear Information System (INIS)

    Barchesi, D.; Otto, A.

    2013-01-01

    Many textbooks and review papers are devoted to plasmonics based on a selection of the numerous bibliography. But none describes the details of the first culmination of plasmonics in 1968, when surface plasmons become a field of optics. The coupling of light with the surface plasmon leads to the surface plasmon polariton (SPP). Therefore, the authors chose to associate historical insight (not avoiding a personal touch), a modern mathematical formulation of the excitation of the SPP by attenuated total reflection (ATR), considered as well understood since decades, and experimental applications since 1969, including recent developments.

  3. An instrument for the measurement of road surface reflection properties

    DEFF Research Database (Denmark)

    Corell, Dennis Dan; Sørensen, K.

    2017-01-01

    Road surface reflection data in the form of standard r-tables serve as input for design calculations of road lighting installations on traffic roads. However, in several countries the use of the standard r-tables has not been verified by measurement in a long period of time, while the types of road...... surfaces in use have changed - for instance to road surface types with less noise from wheel passages. Because of this, a co-operation between the road administrations of the Nordic countries (abbreviated NMF) decided to construct a portable instrument to be used on selections of traffic roads within...

  4. Extractable organics in surface sediments from Thana creek and Bombay harbour

    Digital Repository Service at National Institute of Oceanography (India)

    Rokade, M.A.; Bhosle, N.B.; Kadam, A.N.

    Considerable variations in hydrocarbon and fatty acid levels in surface sediments from Thana creek and Bombay harbour were observed Sediments from the westernside nearshore locations yielded higher values The residues were characterised by infrared...

  5. Reflectance variability of surface coatings reveals characteristic eigenvalue spectra

    Science.gov (United States)

    Medina, José M.; Díaz, José A.; Barros, Rui

    2012-10-01

    We have examined the trial-to-trial variability of the reflectance spectra of surface coatings containing effect pigments. Principal component analysis of reflectances was done at each detection angle separately. A method for classification of principal components is applied based on the eigenvalue spectra. It was found that the eigenvalue spectra follow characteristic power laws and depend on the detection angle. Three different subsets of principal components were examined to separate the relevant spectral features related to the pigments from other noise sources. Reconstruction of the reflectance spectra by taking only the first subset indicated that reflectance variability was higher at near-specular reflection, suggesting a correlation with the trial-to-trial deposition of effect pigments. Reconstruction by using the second subset indicates that variability was higher at short wavelengths. Finally, reconstruction by using only the third subset indicates that reflectance variability was not totally random as a function of the wavelength. The methods employed can be useful in the evaluation of color variability in industrial paint application processes.

  6. Radiological impact of surface water and sediment near uranium mining sites.

    Science.gov (United States)

    Ivanova, K; Stojanovska, Z; Badulin, V; Kunovska, B; Yovcheva, M

    2015-12-01

    The aim of this study is to assess the radiological impact of surface water and sediment around uranium mining sites 20 years after their closing. The areas under observations are 31 former classical underground uranium mining and exploratory sites in Bulgaria, named as objects. The extraction and processing of uranium ores in the Republic of Bulgaria were ended in 1992. To assess the radiological impact of radionuclides field expeditions were performed to sample water and bottom sediment. The migration of uranium through surface water was examined as one of the major pathways for contamination spread. The range of uranium concentration in water flowing from the mining sites was from 0.012 to 6.8 mgU l(-1) with a geometric mean of 0.192 mgU l(-1). The uranium concentrations in water downstream the mining sites were approximately 3 times higher than the background value (upstream). The concentrations of Unat, (226)Ra, (210)Pb, and (232)Th in the sediment of downstream river were higher than those upstream by 3.4, 2.6, 2, and 1.7 times, respectively. The distribution coefficient of uranium reflects its high mobility in most of the sites. In order to evaluate the impact on people as well as site prioritization for more detailed assessment and water management, screening dose assessments were done.

  7. Application of anti-reflection structures on curved surfaces

    Science.gov (United States)

    Yamamoto, Kazuya; Yamamoto, Takeshi; Takaoka, Toshimitsu; Seigo, Masafumi; Kitagawa, Seiichiro

    2012-02-01

    Conventional lens manufacturing is accomplished by injection molding followed by application of a thin film anti-reflection coating. This requires several production steps, each with the associated constraints. Here we report a technique for production of injection molded lenses with conical sub-wavelength grating anti-reflection structures. While similar structures have been made in the past, our technique allows the sub-wavelength structure to be created on curved surfaces during the injection molding process, reducing the number of steps in the manufacturing process. The advantage of this new technology is that anti-reflection function is created without any additional process(es) conventionally required but by a single injection molding process to make lens normally, through which substantial cost saving will be achieved.

  8. Implementation of solar-reflective surfaces: Materials and utility programs

    Energy Technology Data Exchange (ETDEWEB)

    Bretz, S.; Akbari, H.; Rosenfeld, A.; Taha, H.

    1992-06-01

    This report focuses on implementation issues for using solar-reflective surfaces to cool urban heat islands, with specific examples for Sacramento, California. Advantages of solar-reflective surfaces for reducing energy use are: (1) they are cost-effective if albedo is increased during routine maintenance; (2) the energy savings coincide with peak demand for power; (3) there are positive effects on environmental quality; and (4) the white materials have a long service life. Important considerations when choosing materials for mitigating heat islands are identified as albedo, emissivity, durability, cost, pollution and appearance. There is a potential for increasing urban albedo in Sacramento by an additional 18%. Of residential roofs, we estimate that asphalt shingle and modified bitumen cover the largest area, and that built-up roofing and modified bitumen cover the largest area of commercial buildings. For all of these roof types, albedo may be increased at the time of re-roofing without any additional cost. When a roof is repaired, a solar-reflective roof coating may be applied to significantly increase albedo and extend the life of the root Although a coating may be cost-effective if applied to a new roof following installation or to an older roof following repair, it is not cost-effective if the coating is applied only to save energy. Solar-reflective pavement may be cost-effective if the albedo change is included in the routine resurfacing schedule. Cost-effective options for producing light-colored pavement may include: (1) asphalt concrete, if white aggregate is locally available; (2) concrete overlays; and (3) newly developed white binders and aggregate. Another option may be hot-rolled asphalt, with white chippings. Utilities could promote solar-reflective surfaces through advertisement, educational programs and cost-sharing of road resurfacing.

  9. Asteroid surface materials: mineralogical characterizations from reflectance spectra

    International Nuclear Information System (INIS)

    Gaffey, M.J.; McCord, T.B.

    1978-01-01

    The interpretation of diagnostic parameters in the spectral reflectance data for asteroids provides a means of characterizing the mineralogy and petrology of asteroid surface materials. An interpretive technique based on a quantitative understanding of the functional relationship between the optical properties of a mineral assemblage and its mineralogy, petrology and chemistry can provide a considerably more sophisticated characterization of a single material than any matching or classification technique for those objects bright enough to allow spectral reflectance measurements. Albedos derived from radiometry and polarization data for individual asteroids can be used with spectral data to establish the spectral albedo, to define the optical density of the surface material and, in general to constrain mineralogical interpretations. (Auth.)

  10. Urbanization increased metal levels in lake surface sediment and catchment topsoil of waterscape parks

    Energy Technology Data Exchange (ETDEWEB)

    Li, Hong-Bo [Key Laboratory of Urban Environment and Health, Institute of Urban Environment, Chinese Academy of Sciences, Xiamen 361021 (China); Graduate University of Chinese Academy of Sciences, Beijing 100049 (China); Yu, Shen, E-mail: syu@iue.ac.cn [Key Laboratory of Urban Environment and Health, Institute of Urban Environment, Chinese Academy of Sciences, Xiamen 361021 (China); Li, Gui-Lin [Key Laboratory of Urban Environment and Health, Institute of Urban Environment, Chinese Academy of Sciences, Xiamen 361021 (China); Liu, Yi; Yu, Guang-Bin [Key Laboratory of Urban Environment and Health, Institute of Urban Environment, Chinese Academy of Sciences, Xiamen 361021 (China); Graduate University of Chinese Academy of Sciences, Beijing 100049 (China); Deng, Hong [Department of Environmental Sciences, Tiantong National Station of Forest Ecosystem, Key Laboratory of Urbanization and Ecological Restoration, East China Normal University, Shanghai 200062 (China); Wu, Sheng-Chun [State Key Laboratory in Marine Pollution, Biology and Chemistry Department, City University of Hong Kong, Hong Kong (China); Wong, Ming-Hung [Croucher Institute for Environmental Sciences, Hong Kong Baptist University, Hong Kong (China)

    2012-08-15

    Lake surface sediment is mainly derived from topsoil in its catchment. We hypothesized that distribution of anthropogenic metals would be homogenous in lake surface sediment and the lake's catchment topsoil. Anthropogenic metal distributions (cadmium (Cd), copper (Cu), lead (Pb), and zinc (Zn)) in fourteen waterscape parks were investigated in surface sediments and catchment topsoils and possible source homogeneity was tested using stable Pb isotopic ratio analysis. The parks were located along an urbanization gradient consisting of suburban (SU), developing urban (DIU), developed urban (DDU), and central urban core (CUC) areas in Shanghai, China. Results indicated that surface lake sediments and catchment topsoils in the CUC parks were highly contaminated by the investigated anthropogenic metals. Total metal contents in surface sediment and topsoil gradually increased along the urbanization gradient from the SU to CUC areas. Generally, the surface sediments had greater total metal contents than their catchment topsoils. These results suggest that urbanization drives the anthropogenic metal enrichment in both surface sediment and its catchment topsoil in the waterscape parks. Soil fine particles (< 63 {mu}m) and surface sediments had similar enrichment ratios of metals, suggesting that surface runoff might act as a carrier for metals transporting from catchment to lake. Stable Pb isotope ratio analysis revealed that the major anthropogenic Pb source in surface sediment was coal combustion as in the catchment topsoil. Urbanization also correlated with chemical fractionation of metals in both surface sediment and catchment topsoil. From the SU to the CUC parks, amounts of labile metal fractions increased while the residual fraction of those metals remained rather constant. In short, urbanization in Shanghai drives anthropogenic metal distribution in environmental matrices and the sources were homogenous. -- Highlights: Black-Right-Pointing-Pointer Obvious

  11. Urbanization increased metal levels in lake surface sediment and catchment topsoil of waterscape parks

    International Nuclear Information System (INIS)

    Li, Hong-Bo; Yu, Shen; Li, Gui-Lin; Liu, Yi; Yu, Guang-Bin; Deng, Hong; Wu, Sheng-Chun; Wong, Ming-Hung

    2012-01-01

    Lake surface sediment is mainly derived from topsoil in its catchment. We hypothesized that distribution of anthropogenic metals would be homogenous in lake surface sediment and the lake's catchment topsoil. Anthropogenic metal distributions (cadmium (Cd), copper (Cu), lead (Pb), and zinc (Zn)) in fourteen waterscape parks were investigated in surface sediments and catchment topsoils and possible source homogeneity was tested using stable Pb isotopic ratio analysis. The parks were located along an urbanization gradient consisting of suburban (SU), developing urban (DIU), developed urban (DDU), and central urban core (CUC) areas in Shanghai, China. Results indicated that surface lake sediments and catchment topsoils in the CUC parks were highly contaminated by the investigated anthropogenic metals. Total metal contents in surface sediment and topsoil gradually increased along the urbanization gradient from the SU to CUC areas. Generally, the surface sediments had greater total metal contents than their catchment topsoils. These results suggest that urbanization drives the anthropogenic metal enrichment in both surface sediment and its catchment topsoil in the waterscape parks. Soil fine particles (< 63 μm) and surface sediments had similar enrichment ratios of metals, suggesting that surface runoff might act as a carrier for metals transporting from catchment to lake. Stable Pb isotope ratio analysis revealed that the major anthropogenic Pb source in surface sediment was coal combustion as in the catchment topsoil. Urbanization also correlated with chemical fractionation of metals in both surface sediment and catchment topsoil. From the SU to the CUC parks, amounts of labile metal fractions increased while the residual fraction of those metals remained rather constant. In short, urbanization in Shanghai drives anthropogenic metal distribution in environmental matrices and the sources were homogenous. -- Highlights: ► Obvious urbanization effect on metal

  12. Provenance of Holocene sediment on the Chukchi-Alaskan margin based on combined diffuse spectral reflectance and quantitative X-Ray Diffraction analysis

    Science.gov (United States)

    Ortiz, J.D.; Polyak, L.; Grebmeier, J.M.; Darby, D.; Eberl, D.D.; Naidu, S.; Nof, D.

    2009-01-01

    Sediment clay and silt mineral assemblages provide an excellent means of assessing the provenance of fine-grained Arctic sediment especially when a unique mineral assemblage can be tied to specific source areas. The diffuse spectral reflectance (DSR) first derivative measurements and quantitative X-Ray Diffraction (qXRD) on a high-resolution sediment core from the continental slope north of Alaska constrain the sediment mineralogy. DSR results are augmented by measurements on several adjacent cores and compared to surface sediment samples from the northern Alaskan shelf and slope. Using Principal Component Analysis (PCA), we infer that the three leading DSR modes relate to mixtures of smectite + dolomite, illite + goethite, and chlorite + muscovite. This interpretation is consistent with the down core qXRD results. While the smectite + dolomite, and illite + goethite factors show increased variability down core, the chlorite + muscovite factor had highest positive loadings in the middle Holocene, between ca. 6.0 and 3.6??ka. Because the most likely source of the chlorite + muscovite suite in this vicinity lies in the North Pacific, we argue that the oscillations in chlorite + muscovite values likely reflect an increase in the inflow of Pacific water to the Arctic through the Bering Strait. The time interval of this event is associated in other parts of the globe with a non-linear response of the climate system to the decrease in insolation, which may be related to changes in water exchange between the Pacific and Arctic Ocean. ?? 2009 Elsevier B.V.

  13. Sediment Magnetic Proxies Reflect Post-Glacial Climate Change for East-Central New Hampshire

    Science.gov (United States)

    Payton, B. M.; Lopez, G.; Doner, L.; Fowler, B. K.; Geiss, C. E.

    2009-12-01

    The magnetic properties of lake sediments from Pea Porridge Pond in New Hampshire were analyzed in an attempt to reconstruct the paleoclimatic history of the region. Our suite of measurements included magnetic susceptibility (χ), anhysteretic remanent magnetization (ARM), isothermal remanent magnetization (IRM), S ratios, and coercivity distributions of IRM. Magnetic susceptibility reflects the ease in which sediments are magnetized when exposed to a magnetic field and is related to the concentration and composition of the material in the sample. ARM is heavily biased towards the presence of small (0.1-1 μm) single-domain grains and the ARM-ratio (ARM/IRM) can be used as a magnetic grainsize proxy. S-ratios, measured in backfields of 100 mT and 320 mT correspond to the combined effects of changes in magnetic grain-size and mineralogy. The oldest sediments (> 23m, > 13 ka) are characterized by high concentrations (high values of χ, ARM, IRM) of coarse-grained (low ARM-ratios) ferromagnetic (S-ratios ≈ 1) magnetic minerals, representing an influx of predominantly clastic material. The following transitional period (23 - 21 m, approx. 13 - 11 ka) is characterized by increasing organic matter and lower concentrations of ferromagnetic material. High ARM-ratios, however, indicate a large component of SD particles. Coercivity analyses reveal that these SD-grains are mostly of biogenic origin, produced by magnetotactic bacteria. The top of the core (< 21 m, < 11 ka) is characterized by organic-rich sediment containing little magnetizable material. This may be due to the surrounding wetlands acting as a filter preventing magnetic material to reach the center of the lake, or a general stabilization of the landscape decreasing clastic influx. High ARM-ratios suggest the presence of single-domain grains, and low S-ratios suggest a relative increase in high-coercivity material, though coercivity analyses for this part of the core remain ambiguous.

  14. Quantifying suspended sediment sources during flood events in headwater catchments using diffuse reflectance spectroscopy

    Science.gov (United States)

    Legout, Cédric; Poulenard, Jérôme; Nemery, Julien; Navratil, Oldrich; Grangeon, Thomas; Evrard, Olivier; Esteves, Michel

    2013-04-01

    Increasing the understanding of the hydro-sedimentary dynamics at the catchment scale requires data on the origin of suspended sediments in addition to the classical measurements of suspended sediment concentrations and discharge. In mountainous environments the extremely high spatial and temporal variability of suspended sediment fluxes suggests that the proportions of suspended sediment sources transiting at outlets may also exhibit strong variations during flood events. However, conventional fingerprinting techniques based on geochemical and radionuclide measurements are time-consuming and rather expensive. They constitute a major limitation to conduct routine characterisation of the source of suspended sediment transiting at outlets that would require the analysis of a large number of samples. We investigated how visible or infrared diffuse reflectance spectroscopy coupled with partial least squares chemometrics techniques could be used to predict the proportion of source material in suspended sediment samples and how it could help understanding the hydro-sedimentary processes occurring during floods. The studied catchment is located in the southern French Alps, draining an area of 22-km². It is composed of black marls, limestones, molasses, undifferentiated deposits and gypsum. Forty-eight source material samples were collected in badlands areas and 328 suspended sediment samples were collected at the outlet during 23 flood events. Spectroscopic measurements were carried out on dried samples. Given that the erosion processes are particle size selective, five size fractions of source material were measured in order to assess the potential alteration of the signatures. As the biogeochemical processes occurring in the river such as iron oxidation could also affect the signatures, source materials that were immersed in the river for durations ranging from 1 day to 9 weeks were analysed. Finally, partial least-squares regression models were constructed on 81

  15. Stable isotope biogeochemistry of the sulfur cycle in modern marine sediments: I. Seasonal dynamics in a temperate intertidal sandy surface sediment.

    Science.gov (United States)

    Böttcher, Michael; Hespenheide, Britta; Brumsack, Hans-Jürgen; Bosselmann, Katja

    2004-12-01

    A biogeochemical and stable isotope geochemical study was carried out in surface sediments of an organic-matter poor temperate intertidal sandy surface sediment (German Wadden Sea of the North Sea) to investigate the activity of sulfate-reducing bacteria and the dynamics of the vertical partitioning of sedimentary sulfur, iron, and manganese species in relation to the availability of total organic carbon (TOC) and mud contents. The contents and stable isotopic compositions ((34)S/(32)S) of total reduced inorganic sulfur species (TRIS) and dissolved sulfate were measured. Maximum oxygen penetration depths were estimated from the onset of a blackening of the sediments due to FeS accumulation and ranged from 5 to 10 mm below surface (mmbsf). A zone of relatively moderate relative organic-matter enrichment was found between 5 and 20 mmbsf leading to enhanced activities of sulfate-reducing bacteria with sulfate-reduction rates (SRR) up to 350 nmol cm(-3) d(-1). Below this zone, microbial SRR dropped significantly. Depth integrated SRR seem to depend not only on temperature but also on the availability of reactive organic matter. The sulfur-isotopic composition of TRIS was depleted in (34)S by 33-40 per thousand with respect to coexisting dissolved sulfate (constant at about +21 per thousand vs. Vienna-Canyon Diablo Troilite (V-CDT)). Since sulfate reduction is not limited by dissolved sulfate (open system), depth variations of the isotopic composition of TRIS reflect changes in overall isotope effect due to superimposed microbial and abiotic reactions. Most of the solid-phase iron and manganese was bonded to (non-reactive) heavy minerals. However, a layer of reactive Fe(III) and Mn(IV) oxi(hydroxi)des was found in the uppermost sediment section due to re-oxidation of dissolved Fe(II) and Mn(II) species at the sediment-water interface. Metal cycling below the surface is at least partially coupled to intense sulfur cycling.

  16. BET surface area distributions in polar stream sediments: Implications for silicate weathering in a cold-arid environment

    Science.gov (United States)

    Marra, Kristen R.; Elwood Madden, Megan E; Soreghan, Gerilyn S.; Hall, Brenda L

    2014-01-01

    BET surface area values are critical for quantifying the amount of potentially reactive sediments available for chemical weathering and ultimately, prediction of silicate weathering fluxes. BET surface area values of fine-grained (<62.5 μm) sediment from the hyporheic zone of polar glacial streams in the McMurdo Dry Valleys, Antarctica (Wright and Taylor Valleys) exhibit a wide range (2.5–70.6 m2/g) of surface area values. Samples from one (Delta Stream, Taylor Valley) of the four sampled stream transects exhibit high values (up to 70.6 m2/g), which greatly exceed surface area values from three temperate proglacial streams (0.3–12.1 m2/g). Only Clark stream in Wright Valley exhibits a robust trend with distance, wherein surface area systematically decreases (and particle size increases) in the mud fraction downstream, interpreted to reflect rapid dissolution processes in the weathering environment. The remaining transects exhibit a range in variability in surface area distributions along the length of the channel, likely related to variations in eolian input to exposed channel beds, adjacent snow drifts, and to glacier surfaces, where dust is trapped and subsequently liberated during summer melting. Additionally, variations in stream discharge rate, which mobilizes sediment in pulses and influences water:rock ratios, the origin and nature of the underlying drift material, and the contribution of organic acids may play significant roles in the production and mobilization of high-surface area sediment. This study highlights the presence of sediments with high surface area in cold-based glacier systems, which influences models of chemical denudation rates and the impact of glacial systems on the global carbon cycle.

  17. Geotechnical properties of surface sediments in the INDEX area

    Digital Repository Service at National Institute of Oceanography (India)

    Khadge, N.H.

    As a part of the environmental impact assessment studies, geotechnical properties of sediments were determined in the Central Indian Basin. The undrained shear strength and index properties of the siliceous sediments were determined on 20 box cores...

  18. Near Surface Seismic Reflection Imaging: Great Potential Under Critical Eye

    Science.gov (United States)

    Miller, R. D.; Peterie, S.; Judy, B. E.

    2014-12-01

    Seismic-reflection imaging has long been a mainstay in the oil and gas exploration community with mind boggling advancements in just the last decade, but its application to engineering, environmental, and groundwater problems has not seen the same level of utilization. A great deal of the problem lies in the many assumptions that are valid for deep exploration that are violated in the very complex near surface. Large channel systems with acquisition geometries conducive for both deep and shallow targets are many times assumed to be capable of extending the imaging depth window. In reality, constraints of the source and sensor/recording systems must be considered, where large powerful sources are needed to image exploration depths while low-energy, high-frequency sources are required for the shallow and thin targets in the near surface. Attempts to make one size fit all will result in artifacts that result in bogus images and characterizations in the shallow subsurface.Narrow optimum offsets, highly attenuative materials, extreme velocity variability, wavefield interference, and low signal-to-noise ratios provide an ideal breeding ground for the generation of artifacts on near-surface seismic-reflection data. With the cost of shallow reflection data being so high relative to other geophysical methods and invasive sampling, sometimes a single failure can hinder the growth in the use of the method. The method is extremely powerful and has the potential to provide vast quantities of information critical to understand the distributed hydrogeological and biogeochemical processes that elude borehole investigations. It is imperative that data be acquired in its rawest possible form and be processed with an eye to each operation. Cost savings sometimes result in one-size-fits-all acquisition and automated processing flows. Attention to detail and following signal from origination to characterization is essential.

  19. Settlement patterns of the coral Acropora millepora on sediment-laden surfaces.

    Science.gov (United States)

    Ricardo, Gerard F; Jones, Ross J; Nordborg, Mikaela; Negri, Andrew P

    2017-12-31

    Successful recruitment in corals is important for the sustenance of coral reefs, and is considered a demographic bottleneck in the recovery of reef populations following disturbance events. Yet several factors influence larval settlement behaviour, and here we quantified thresholds associated with light attenuation and accumulated sediments on settlement substrates. Sediments deposited on calcareous red algae (CRA) directly and indirectly impacted coral settlement patterns. Although not avoiding direct contact, Acropora millepora larvae were very reluctant to settle on surfaces layered with sediments, progressively shifting their settlement preference from upward to downward facing (sediment-free) surfaces under increasing levels of deposited sediment. When only upward-facing surfaces were presented, 10% of settlement was inhibited at thresholds from 0.9 to 16mgcm -2 (EC 10 ), regardless of sediment type (carbonate and siliciclastic) or particle size (fine and coarse silt). These levels equate to a very thin (<150μm) veneer of sediment that occurs within background levels on reefs. Grooves within settlement surfaces slightly improved options for settlement on sediment-coated surfaces (EC 10 : 29mgcm -2 ), but were quickly infilled at higher deposited sediment levels. CRA that was temporarily smothered by sediment for 6d became bleached (53% surface area), and inhibited settlement at ~7mgcm -2 (EC 10 ). A minor decrease in settlement was observed at high and very low light intensities when using suboptimal concentrations of a settlement inducer (CRA extract); however, no inhibition was observed when natural CRA surfaces along with more realistic diel-light patterns were applied. The low deposited sediment thresholds indicate that even a thin veneer of sediment can have consequences for larval settlement due to a reduction of optimal substrate. And while grooves and overhangs provide more settlement options in high deposition areas, recruits settling at these

  20. Wright Valley Sediments as Potential Analogs for Martian Surface Processes

    Science.gov (United States)

    Englert, P. A. J.; Bishop, J. L.; Patel, S.; Gibson, E. K.; Koeberl, C.

    2015-12-01

    The Antarctic Dry Valleys (ADV) may provide a unique terrestrial analog for current Martian surface processes. The Wright Valley located in the ADV contains streams, lakes and ponds that host highly saline, sedimentary environments. This project highlights comparisons of formation and salt accumulation processes at the Don Juan Pond (DJP) and Don Quixote Pond (DQP). These are located in the north and south forks of the Wright Valley, which are unique areas where unusual terrestrial processes can be studied. DQP is located in the western part of the north fork about 100 m above mean seawater level. The DQP Valley walls are up to 2500 m high and the brine is seasonally frozen. DJP from the south fork is located ~9 km west of Lake Vanda. The basin floor is 117 m above mean seawater level with activity to the north and south rising above 1000 m. The DJP brine does not freeze and may be a model environment for Ca and Cl weathering and distribution on Mars. Our findings indicate that DJP and DQP have formed in similar climatic and geological environments, but likely experienced different formation conditions. Samples were collected from surface, soil pits and depth profiles during the 1979/1980, the 1990/1991 and the 2005/2006 field seasons. Elemental abundances and mineralogy were evaluated for several sets of sediments. The DJP basin shows low surface abundances of halite and relatively high abundances of sulfates throughout with gypsum or anhydrite dominating at different locations. The DQP area has high surface abundances of halite with gypsum present as the major sulfate. Two models have been proposed to explain these differences: DQP may have formed through a combination of shallow and some deep groundwater influx, while deep groundwater upwelling likely played the dominant role of salt formation at DJP. Our study seeks to understand the formation of DQP and DJP as unique terrestrial processes and as models for Ca, Cl, and S weathering and distribution on Mars.

  1. Micro reflectance difference techniques: Optical probes for surface exploration

    Energy Technology Data Exchange (ETDEWEB)

    Lastras-Martinez, L.F.; Del Pozo-Zamudio, O.; Herrera-Jasso, R.; Ulloa-Castillo, N.A.; Balderas-Navarro, R.E.; Ortega-Gallegos, J.; Lastras-Martinez, A. [Instituto de Investigacion en Comunicacion Optica, Universidad Autonoma de San Luis Potosi, Alvaro Obregon 64, 78000 San Luis Potosi, S.L.P. (Mexico)

    2012-06-15

    Micro reflectance difference spectroscopy ({mu}-RDS) is a promising tool for the in-situ and ex-situ characterization of semiconductors surfaces and interfaces. We discuss and compare two different approaches used to measure {mu}-RD spectra. One is based on a charge-coupled device (CCD) camera, while the other uses a laser and a XY translation stage. To show the performance of these systems, we have measured surface optical anisotropies of GaSb(001) sample on which anisotropic strains have been generated by preferential mechanical polishing along [110] and [1 anti 10] directions. The spectrometers are complementary and the selection of one of them depends on the sample to be investigated and on experimental conditions. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  2. Total and available metal contents in sediments by synchrotron radiation total reflection X-ray fluorescence

    Energy Technology Data Exchange (ETDEWEB)

    Moreira, Silvana; Sobrinho, Gilmar A. [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Civil]. E-mail: silvana@fecf.unicamp.br; Vives, Ana Elisa S. de [Universidade Metodista de Piracicaba (UNIMEP), SP (Brazil); Jesus, Edgar F.O. de; Lopes, Ricardo T. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia

    2002-07-01

    In this work the total and available contents of Al, Si, Cl, K, Mn, Fe, Co, Ni, Cu, Zn, Sr, Zr, Ba, Ce and Pb in sediments from river Atibaia were determined by Synchrotron Radiation Total Reflection X-Ray Fluorescence technique. The detection limits for K series varies from 200 ng.mL{sup -1} for Al to 2 ng.mL{sup -1} for Zn while for L series the value varies from 20 ng.mL{sup -1} for Ba to 10 ng.mL{sup -1} for Pb. The samples were submitted to two different processes, in order to obtain the total and biological available metal contents. The information about metal content is a important parameter for a correct evaluation about the hydrologic cycle in Piracicaba basin. All the measure were carried out at the National Synchrotron Light Laboratory, Campinas, SP, Brazil, using a white beam for excitation. (author)

  3. [Surface Property and Sorption Characteristics of Phosphorus onto Surface Sediments in Sanggou Bay].

    Science.gov (United States)

    Zhu, Jia-mei; Cao, Xiao-yan; Liu, Su-mei; Wang, Li-sha; Yang, Gui-peng; Ge, Cheng-feng; Lu, Min

    2016-02-15

    Kinetic curves and isotherms were investigated to study the sorption mechanism of phosphorus onto the sediments of Sanggou Bay, together with the surface charge properties of sediments and the forms of phosphorus studied. The results showed that the sorption including a fast process and a slow one, and could be described by a two-compartment first order equation. The thermodynamic isotherms were well fitted with a modified Langmuir equation. The maximum adsorption capacity was larger in summer than in spring, and the smaller particle size was favorable to the sorption. The maximum adsorption capacities (Qm) were 0.0471-0.1230 mg x g(-1), and the zero equilibrium phosphorus concentration (EPC0) of the sediments ranged from 0.0596 mg x L(-1) to 0.1927 mg x L(-1), which indicated that the sediments from Sanggou Bay were sources of phosphorus. Inorganic phosphorus (IP) was the main form of total phosphorus (TP). The contents of exchangeable or loosely absorbed P and Fe-bound P increased significantly in the samples after sorption. The sorption process involved physical sorption and chemical sorption, with the former being the predominant.

  4. Age of a prehistoric "Rodedian" cult site constrained by sediment and rock surface luminescence dating techniques

    DEFF Research Database (Denmark)

    Sohbati, Reza; Murray, Andrew; Porat, N.

    2015-01-01

    . Important information on the bleaching history of the rock surfaces directly obtained from these luminescencedepth profiles is not available in the underlying unconsolidated sediments. This is a significant advantage of rock surface dating over more conventional sediment dating. © 2015 Elsevier B.V. All...

  5. Quantitative radiolarian assemblages in surface sediments from the central Indian Basin and their paleomonsoonal significance

    Digital Repository Service at National Institute of Oceanography (India)

    Gupta, S.M.

    The percentage data of 47 radiolarian coarser taxonomic groups in the surface sediments from the central Indian Basin was subjected to cluster and factor analyses. The R-mode cluster analysis resulted in 3 dominant clusters which represent surface...

  6. Assessment of metal contamination in estuarine surface sediments from Dongying City, China: Use of a modified ecological risk index.

    Science.gov (United States)

    Liu, Qunqun; Wang, Feifei; Meng, Fanping; Jiang, Lei; Li, Guangjing; Zhou, Rongguang

    2018-01-01

    Surface sediments and clam Meretrix meretrix were collected from a northern estuarine region in Dongying City, China. Sediments were analysed for heavy metals (Hg, As, Cd, Cr, Cu, Pb, and Zn) and the clams were tested for metallothioneins (MTs) and lysosomal membrane stability (LMS). The heavy metal total concentrations decreased in the order of Cr>Zn>Cu>Pb>As>Cd>Hg. The results of Bureau Communautaire de Référence (BCR) sequential extraction of heavy metals showed that the geochemical speciation of all heavy metals was dominated by residual fraction. According to the responses of biomarkers in M. meretrix, the modified potential ecological risk index (PERI-B) can more accurately reflect heavy metals pollution. PERI-B showed all sediment samples have low or moderate risk, except at site S10 (considerable risk), and the main contribution of ecological risk heavy metals were Cd and Hg. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. Near-surface Heating of Young Rift Sediment Causes Mass Production and Discharge of Reactive Dissolved Organic Matter

    Science.gov (United States)

    Lin, Yu-Shih; Koch, Boris P.; Feseker, Tomas; Ziervogel, Kai; Goldhammer, Tobias; Schmidt, Frauke; Witt, Matthias; Kellermann, Matthias Y.; Zabel, Matthias; Teske, Andreas; Hinrichs, Kai-Uwe

    2017-03-01

    Ocean margin sediments have been considered as important sources of dissolved organic carbon (DOC) to the deep ocean, yet the contribution from advective settings has just started to be acknowledged. Here we present evidence showing that near-surface heating of sediment in the Guaymas Basin, a young extensional depression, causes mass production and discharge of reactive dissolved organic matter (DOM). In the sediment heated up to ~100 °C, we found unexpectedly low DOC concentrations in the pore waters, reflecting the combined effect of thermal desorption and advective fluid flow. Heating experiments suggested DOC production to be a rapid, abiotic process with the DOC concentration increasing exponentially with temperature. The high proportions of total hydrolyzable amino acids and presence of chemical species affiliated with activated hydrocarbons, carbohydrates and peptides indicate high reactivity of the DOM. Model simulation suggests that at the local scale, near-surface heating of sediment creates short and massive DOC discharge events that elevate the bottom-water DOC concentration. Because of the heterogeneous distribution of high heat flow areas, the expulsion of reactive DOM is spotty at any given time. We conclude that hydrothermal heating of young rift sediments alter deep-ocean budgets of bioavailable DOM, creating organic-rich habitats for benthic life.

  8. Near-surface Heating of Young Rift Sediment Causes Mass Production and Discharge of Reactive Dissolved Organic Matter.

    Science.gov (United States)

    Lin, Yu-Shih; Koch, Boris P; Feseker, Tomas; Ziervogel, Kai; Goldhammer, Tobias; Schmidt, Frauke; Witt, Matthias; Kellermann, Matthias Y; Zabel, Matthias; Teske, Andreas; Hinrichs, Kai-Uwe

    2017-03-22

    Ocean margin sediments have been considered as important sources of dissolved organic carbon (DOC) to the deep ocean, yet the contribution from advective settings has just started to be acknowledged. Here we present evidence showing that near-surface heating of sediment in the Guaymas Basin, a young extensional depression, causes mass production and discharge of reactive dissolved organic matter (DOM). In the sediment heated up to ~100 °C, we found unexpectedly low DOC concentrations in the pore waters, reflecting the combined effect of thermal desorption and advective fluid flow. Heating experiments suggested DOC production to be a rapid, abiotic process with the DOC concentration increasing exponentially with temperature. The high proportions of total hydrolyzable amino acids and presence of chemical species affiliated with activated hydrocarbons, carbohydrates and peptides indicate high reactivity of the DOM. Model simulation suggests that at the local scale, near-surface heating of sediment creates short and massive DOC discharge events that elevate the bottom-water DOC concentration. Because of the heterogeneous distribution of high heat flow areas, the expulsion of reactive DOM is spotty at any given time. We conclude that hydrothermal heating of young rift sediments alter deep-ocean budgets of bioavailable DOM, creating organic-rich habitats for benthic life.

  9. Don Quixote Pond Sediments: Surface and Subsurface Chemistry and Mineralogy

    Science.gov (United States)

    Englert, P. A. J.; Bishop, J. L.; Patel, S.; Gibson, E. K.; Koeberl, C.

    2014-12-01

    Don Quixote Pond, like Don Juan Pond in the South Fork of Wright Valley, Antarctica, is a model for calcium and chlorine weathering and distribution on Mars. It is located in the western part of the North Fork about 100 m above Mean Seawater Level; its brine is seasonally frozen [1]. Field observations show zones of discoloration which grow lighter with distance from the pond edges. Four sediment cores, a set of radial surface samples, special surface samples, and samples of local rocks were obtained [2]. We report on chemical and mineral analyses of traverse samples and on two cores. Core DQ20 is a northeastern shoreline core. Its soluble salt concentration exceeds 200 micromoles/g in the top 5 cm, and then falls to less than 70 micromoles/g at the permafrost depth of 15 cm. These concentrations are low when compared to similarly positioned locations at Don Juan Pond and to cores from Prospect Mesa close to Lake Vanda, Wright Valley. Halite, soda niter, tachyhydrite and/bischovite are suggested from the ionic molar relationships Measured halite concentrations of surface samples, collected along a traverse of 35 m from the pond outwards, range from over 5% to trace amounts, decreasing with distance. Gypsum is also present in almost all of these samples ranging from 0.2% to 2.6%, but does not exhibit a trend. However, in core DQ35, located at a distance of 15 m along the traverse, gypsum decreases from 2.5% to 0.6% from the surface to the permafrost depth of 12 cm. While DQ35 and radial samples show high quartz and albite abundance, samples that contained visible encrustations and evaporites are low in these minerals and rich in highly diverse alteration products. Don Juan Basin ponds may have formed by a complex surface water mobilization of weathering products [3] and local groundwater action [4,5]. In contrast, Don Quixote pond mineralogy and chemistry may be consistent with a less complex shallow and deep groundwater system origin [1]. [1] Harris H

  10. Distribution of benthic foraminifers (>125 um) in the surface sediments of the Arctic Ocean

    Science.gov (United States)

    Osterman, Lisa E.; Poore, Richard Z.; Foley, Kevin M.

    1999-01-01

    Census data on benthic foraminifers (>125 ?m) in surface sediment samples from 49 box cores are used to define four depth-controlled biofacies, which will aid in the paleoceanographic reconstruction of the Arctic Ocean. The shelf biofacies contains a mix of shallow-water calcareous and agglutinated species from the continental shelves of the Beaufort and Chukchi Seas and reflects the variable sedimentologic and oceanic conditions of the Arctic shelves. The intermediate-depth calcareous biofacies, found between 500 and 1,100 meters water depth (mwd), contains abundant Cassidulina teretis , presumably indicating the influence of Atlantic-derived water at this depth. In water depths between 1,100 and 3,500 m, a deepwater calcareous biofacies contains abundant Oridorsalis umbonatus . Below 3,500 mwd, the deepwater mixed calcareous/agglutinated biofacies of the Canada, Makarov, and Eurasian Basins reflects a combination of low productivity, dissolution, and sediment transport. Two other benthic foraminiferal species show specific environmental preferences. Fontbotia wuellerstorfi has a depth distribution between 900 and 3,500 mwd, but maximum abundance occurs in the region of the Mendeleyev Ridge. The elevated abundance of F. wuellerstorfi may be related to increased food supply carried by a branch of Atlantic water that crosses the Lomonosov Ridge near the Russian Continental Shelf. Triloculina frigida is recognized to be a species preferring lower slope sediments commonly disturbed by turbidites and bottom currents. INTRODUCTION At present, our understanding of the Arctic Ocean lags behind our understanding of other oceans, and fundamental questions still exist about its role in and response to global climate change. The Arctic Ocean is particularly sensitive to climatic fluctuations because small changes in the amounts of sea-ice cover can alter global albedo and thermohaline circulation (Aagaard and Carmack, 1994). Numerous questions still exist regarding the nature

  11. Sea ice and primary production proxies in surface sediments from a High Arctic Greenland fjord

    DEFF Research Database (Denmark)

    Ribeiro, Sofia; Sejr, Mikael K.; Limoges, Audrey

    2017-01-01

    that IP25 records from fjords need to be carefully considered and not directly compared to marine settings. The sea ice-associated biomarker HBI III revealed an open-water signature, with highest concentrations near the mid-July ice edge. This proxy evaluation is an important step towards reliable......In order to establish a baseline for proxy-based reconstructions for the Young Sound–Tyrolerfjord system (Northeast Greenland), we analysed the spatial distribution of primary production and sea ice proxies in surface sediments from the fjord, against monitoring data from the Greenland Ecosystem...... Monitoring Programme. Clear spatial gradients in organic carbon and biogenic silica contents reflected marine influence, nutrient availability and river-induced turbidity, in good agreement with in situ measurements. The sea ice proxy IP25 was detected at all sites but at low concentrations, indicating...

  12. Interferometry of a reflective axicon surface with a small cone angle using an optical inner surface

    Science.gov (United States)

    Gao, Huimin; Zhang, Xiaodong; Fang, Fengzhou

    2017-09-01

    Reflective axicons, widely used in optical alignment and Bessel-Gauss beam generation, require a highly accurate cone angle and surface metrology. However, current methods focus on the cone angle measurement and it is still difficult to measure the surface of a reflective axicon with a small cone angle. An interferometer measurement method using an optical inner surface is proposed to obtain the surface and cone angle simultaneously. The optical axis of the axicon and the optical inner surface should align together and be parallel to the beam light from the interferometer. The interference fringe would be obtained by the optical system consisting of the axicon and the optical inner surface. The theoretical model is established and analyzed through ray tracing theory, and is verified by optical simulation software. Fabrication errors in the axicon and the inner surface, and misalignment of the measurement setup are investigated systematically and separated in the measurement process. In the experiments, the reflective axicon with a cone angle of about 90° was measured by the proposed method, the results of which show good agreement with a stylus profiler (Taylor-Hobson PGI 3D) in cone angle trend and generatrix error. Experimental results prove the feasibility of the proposed method. This economical and effective method can be widely used with all types of reflective axicons, and it can obtain the surface error map of the axicon as well as the inner cylinder at the same time. The uncertainty and resolution of the proposed method is based on the performance of the interferometer. The uncertainty of alignment angle errors is less than 10-10 rad; the lateral resolution is 53.8 µm.

  13. Interferometry of a reflective axicon surface with a small cone angle using an optical inner surface

    International Nuclear Information System (INIS)

    Gao, Huimin; Zhang, Xiaodong; Fang, Fengzhou

    2017-01-01

    Reflective axicons, widely used in optical alignment and Bessel–Gauss beam generation, require a highly accurate cone angle and surface metrology. However, current methods focus on the cone angle measurement and it is still difficult to measure the surface of a reflective axicon with a small cone angle. An interferometer measurement method using an optical inner surface is proposed to obtain the surface and cone angle simultaneously. The optical axis of the axicon and the optical inner surface should align together and be parallel to the beam light from the interferometer. The interference fringe would be obtained by the optical system consisting of the axicon and the optical inner surface. The theoretical model is established and analyzed through ray tracing theory, and is verified by optical simulation software. Fabrication errors in the axicon and the inner surface, and misalignment of the measurement setup are investigated systematically and separated in the measurement process. In the experiments, the reflective axicon with a cone angle of about 90° was measured by the proposed method, the results of which show good agreement with a stylus profiler (Taylor-Hobson PGI 3D) in cone angle trend and generatrix error. Experimental results prove the feasibility of the proposed method. This economical and effective method can be widely used with all types of reflective axicons, and it can obtain the surface error map of the axicon as well as the inner cylinder at the same time. The uncertainty and resolution of the proposed method is based on the performance of the interferometer. The uncertainty of alignment angle errors is less than 10 −10 rad; the lateral resolution is 53.8 µ m. (paper)

  14. Effects of soil surface roughness on interrill erosion processes and sediment particle size distribution

    Science.gov (United States)

    Ding, Wenfeng; Huang, Chihua

    2017-10-01

    Soil surface roughness significantly impacts runoff and erosion under rainfall. Few previous studies on runoff generation focused on the effects of soil surface roughness on the sediment particle size distribution (PSD), which greatly affects interrill erosion and sedimentation processes. To address this issue, a rainfall-simulation experiment was conducted with treatments that included two different initial soil surface roughnesses and two rainfall intensities. Soil surface roughness was determined by using photogrammetric method. For each simulated event, runoff and sediment samples were collected at different experimental times. The effective (undispersed) PSD of each sediment sample and the ultimate (after dispersion) PSD were used to investigate the detachment and transport mechanisms involved in sediment movement. The results show that soil surface roughness significantly delayed runoff initiation, but had no significant effect on the steady runoff rate. However, a significant difference in the soil loss rate was observed between the smooth and rough soil surfaces. Sediments from smooth soil surfaces were more depleted in clay-size particles, but more enriched in sand-size particles than those from rough soil surfaces, suggesting that erosion was less selective on smooth than on rough soil surfaces. The ratio of different sizes of transported sediment to the soil matrix indicates that most of the clay was eroded in the form of aggregates, silt-size particles were transported mainly as primary particles, and sand-size particles were predominantly aggregates of finer particles. Soil surface roughness has a crucial effect on the sediment size distribution and erosion processes. Significant differences of the enrichment ratios for the effective PSD and the ultimate PSD were observed under the two soil surface roughness treatments. These findings demonstrate that we should consider each particle size separately rather than use only the total sediment discharge in

  15. MODIS/Terra Surface Reflectance 8-Day L3 Global 250m SIN Grid V005

    Data.gov (United States)

    National Aeronautics and Space Administration — The MODIS Surface Reflectance products provide an estimate of the surface spectral reflectance as it would be measured at ground level in the absence of atmospheric...

  16. MODIS/Terra Surface Reflectance 8-Day L3 Global 500m SIN Grid V005

    Data.gov (United States)

    National Aeronautics and Space Administration — The MODIS Surface Reflectance products provide an estimate of the surface spectral reflectance as it would be measured at ground level in the absence of atmospheric...

  17. MODIS/Terra Surface Reflectance Daily L2G Global 250m SIN Grid V005

    Data.gov (United States)

    National Aeronautics and Space Administration — The MODIS Surface Reflectance products provide an estimate of the surface spectral reflectance as it would be measured at ground level in the absence of atmospheric...

  18. Metal pollution determined by pollution indices for sea grass P. oceanica and surface sediments

    Directory of Open Access Journals (Sweden)

    Stanković Slavka

    2015-01-01

    Full Text Available Concentrations of Fe, Mn, Cu, Zn, Pb, Ni, Co, As, Co, and Hg in the sea grass Posidonia oceanica and surface sediment samples were determined. Together with P. oceanica, surface sediment samples were collected at eight locations in the major demographic, tourist and port areas along the Montenegrin coast to assess metal pollution. The metal pollution index (MPI and metal enrichment factor (EF were calculated and used to evaluate the impact of heavy metals in the surface sediment on P. oceanica. The sediment MPI and EF values were lower than these values in P. oceanica at the same locations. Since the surface sediment contained lower mean concentrations of Zn, Ni, Pb, Cd and Hg, than the sea grass P. oceanic, we concluded that the sea grass absorbed some metals from the seawater column. [Projekat Ministarstva nauke Republike Srbije, br. III 43009

  19. Distribution of 137Cs in surface seawater and sediment around Sabahs Sulu-Sulawesi Sea

    International Nuclear Information System (INIS)

    Mohd Izwan Abdul Aziz; Ahmad Sanadi Abu Bakar; Yii, Mei Wo; Nurrul Assyikeen Jaffary; Zaharudin Ahmad

    2010-01-01

    The studies on distribution of 137 Cs in surface seawater and sediment around Sabahs Sulu-Sulawesi Sea were carried out during Ekspedisi Pelayaran Saintifik Perdana (EPSP) in July 2009. About sixteen and twenty five sampling locations were identified for surface seawater and sediment respectively in Sabahs Sulu-Sulawesi Sea. Large volumes of seawater samples are collected and co-precipitation technique was employed to concentrate cesium content before known amounts of 134 Cs tracer were added as yield determinant. Grab sampler were used to collect surface sediment sample. The caesium precipitate and sediment were dried and finely ground before counted using gamma-ray spectrometry system at 661 keV. The activity of 137 Cs was found in surface seawater and sediment to be in the range 1.73 Bq/ m 3 to 5.50 Bq/ m 3 and 1.15 Bq/ kg to 4.53 Bq/ kg respectively. (author)

  20. Heavy metals in surface sediments of the Jialu River, China: Their relations to environmental factors

    International Nuclear Information System (INIS)

    Fu, Jie; Zhao, Changpo; Luo, Yupeng; Liu, Chunsheng; Kyzas, George Z.; Luo, Yin; Zhao, Dongye; An, Shuqing; Zhu, Hailiang

    2014-01-01

    Highlights: • Zhengzhou City had major effect on the pollution of the Jialu River. • TN, OP, TP and COD Mn in water drove heavy metals to deposit in sediments. • B-IBI was sensitive to the adverse effect of heavy metals in sediments. - Abstract: This work investigated heavy metal pollution in surface sediments of the Jialu River, China. Sediment samples were collected at 19 sites along the river in connection with field surveys and the total concentrations were determined using atomic fluorescence spectrometer and inductively coupled plasma optical emission spectrometer. Sediment samples with higher metal concentrations were collected from the upper reach of the river, while sediments in the middle and lower reaches had relatively lower metal concentrations. Multivariate techniques including Pearson correlation, hierarchical cluster and principal components analysis were used to evaluate the metal sources. The ecological risk associated with the heavy metals in sediments was rated as moderate based on the assessments using methods of consensus-based Sediment Quality Guidelines, Potential Ecological Risk Index and Geo-accumulation Index. The relations between heavy metals and various environmental factors (i.e., chemical properties of sediments, water quality indices and aquatic organism indices) were also studied. Nitrate nitrogen, total nitrogen, and total polycyclic aromatic hydrocarbons concentrations in sediments showed a co-release behavior with heavy metals. Ammonia nitrogen, total nitrogen, orthophosphate, total phosphate and permanganate index in water were found to be related to metal sedimentation. Heavy metals in sediments posed a potential impact on the benthos community

  1. Viscoelasticity evaluation of rubber by surface reflection of supersonic wave.

    Science.gov (United States)

    Omata, Nobuaki; Suga, Takahiro; Furusawa, Hirokazu; Urabe, Shinichi; Kondo, Takeru; Ni, Qing-Qing

    2006-12-22

    The main characteristic of rubber is a viscoelasticity. So it is important to research the characteristic of the viscoelasticity of the high frequency band for the friction between a rubber material and the hard one with roughness, for instance, the tire and the road. As for the measurement of the viscoelasticity of rubber, DMA (dynamic mechanical analysis) is general. However, some problems are pointed out to the measurement of the high frequency band by DMA. Then, we evaluated the viscoelasticity characteristic by the supersonic wave measurement. However, attenuation of rubber is large, and when the viscoelasticity is measured by the supersonic wave therefore, it is inconvenient and limited in a past method by means of bottom reflection. In this report, we tried the viscoelasticity evaluation by the method of using complex surface reflection coefficient and we compared with the friction coefficient under wide-range friction velocity. As a result, some relationships had been found for two properties. We report the result that character of viscoelasticity of rubber was comparable to friction coefficient.

  2. Mars analog minerals' spectral reflectance characteristics under Martian surface conditions

    Science.gov (United States)

    Poitras, J. T.; Cloutis, E. A.; Salvatore, M. R.; Mertzman, S. A.; Applin, D. M.; Mann, P.

    2018-05-01

    We investigated the spectral reflectance properties of minerals under a simulated Martian environment. Twenty-eight different hydrated or hydroxylated phases of carbonates, sulfates, and silica minerals were selected based on past detection on Mars through spectral remote sensing data. Samples were ground and dry sieved to Mars, only losing adsorbed H2O while maintaining their diagnostic spectral features. Sulfates were less stable, often with shifts in the band position of the SO, Fe, and OH absorption features. Silicas displayed spectral shifts related to SiOH and hydration state of the mineral surface, while diagnostic bands for quartz were stable. Previous detection of carbonate minerals based on 2.3-2.5 μm and 3.4-3.9 μm features appears to be consistent with our results. Sulfate mineral detection is more questionable since there can be shifts in band position related to SO4. The loss of the 0.43 μm Fe3+ band in many of the sulfates indicate that there are fewer potential candidates for Fe3+ sulfates to permanently exist on the Martian surface based on this band. The gypsum sample changed phase to basanite during desiccation as demonstrated by both reflectance and XRD. Silica on Mars has been detected using band depth ratio at 1.91 and 1.96 μm and band minimum position of the 1.4 μm feature, and the properties are also used to determine their age. This technique continues to be useful for positive silica identifications, however, silica age appears to be less consistent with our laboratory data. These results will be useful in spectral libraries for characterizing Martian remote sensed data.

  3. X-Ray Reflectivity from the Surface of a Liquid Crystal:

    DEFF Research Database (Denmark)

    Pershan, P.S.; Als-Nielsen, Jens Aage

    1984-01-01

    X-ray reflectivity from the surface of a nematic liquid crystal is interpreted as the coherent superposition of Fresnel reflection from the surface and Bragg reflection from smectic order induced by the surface. Angular dependence of the Fresnel effect yields information on surface structure....... Measurement of the intensity of diffuse critical scattering relative to the Fresnel reflection yields the absolute value of the critical part of the density-density correlation function....

  4. Anthropogenic Pollution in Izmit Bay: Heavy Metal Concentrations in Surface Sediments

    OpenAIRE

    YAŞAR, D.

    2014-01-01

    The extent of marine pollution in İzmit Bay is studied using geochemical data in surface sediments. The concentrations of 41 elements in 24 samples establish that surface sediments in inner and central İzmit Bay display significant enrichments in Ag, As, Cd, Cr, Co, Cu, Hg, Mo, P, Pb, Sb, Ti, V, and Zn associated with high concentrations of total organic carbon and sulphur. Geo-accumulation indices indicate that the inner and central İzmit Bay surface sediments are moderately to very...

  5. The distribution of gamma-emitting radionuclides in surface subtidal sediments near the Sellafield plant

    Science.gov (United States)

    Jones, D. G.; Roberts, P. D.; Miller, J. M.

    1988-08-01

    Detailed distributions of total gamma activity, 137Cs, 106Ru and 95Zr + 95Nb in surface seabed sediments near the Sellafield plant are presented. The results are derived from a towed seabed gamma-ray spectrometer survey in September, 1982. All the distributions are similar, with contours of equal activity parallel to the coast defining a 'ridge' of higher activity which is displaced northwards relative to the outfall. This pattern appears to be largely a response to the transport of particle-associated radioeffluent modified in places by the type of seabed sediment present. At greater distance from Sellafield, the uptake of nuclides from solution seems to be more important. Nuclide concentrations decrease with increasing distance from Sellafield; rates of decrease being in the order Zr + Nb > Ru > Cs. This can be related to the levels of the nuclides discharged, their sorption characteristics and their half lives. The pattern of seabed activity seems to have been fairly stable over the period 1978 - 1985, but there is evidence of a small northward shift. Concentrations of 137Cs and 106Ru in 1985 were considerably lower than in 1978 or 1982. This is explicable in terms of the fall in discharge levels allied, in the case of Ru, to its short half life and, for Cs, the desorption observed in laboratory experiments. Nuclide ratios in sediment samples yield apparent transit times for the transport of nuclides in the survey area of 1·7 - 3·7 years. These times are generally greater than those obtained from sediments in the more distant Solway Firth and Ravenglass Estuary. It is suggested that they reflect fairly intense bioturbation causing mixing of relatively recent effluent with that from earlier discharges. This is supported by structures observed in X-radiographs of box cores, an abundant burrowing benthos and by interpretations of nuclide profiles and radiocarbon dating of sediment cores by other workers. A lag effect, of up to two years across the survey area

  6. A framework for modeling connections between hydraulics, water surface roughness, and surface reflectance in open channel flows

    Science.gov (United States)

    Legleiter, Carl; Mobley, Curtis D.; Overstreet, Brandon

    2017-01-01

    This paper introduces a framework for examining connections between the flow field, the texture of the air-water interface, and the reflectance of the water surface and thus evaluating the potential to infer hydraulic information from remotely sensed observations of surface reflectance. We used a spatial correlation model describing water surface topography to illustrate the application of our framework. Nondimensional relations between model parameters and flow intensity were established based on a prior flume study. Expressing the model in the spatial frequency domain allowed us to use an efficient Fourier transform-based algorithm for simulating water surfaces. Realizations for both flume and field settings had water surface slope distributions positively correlated with velocity and water surface roughness. However, most surface facets were gently sloped and thus unlikely to yield strong specular reflections; the model exaggerated the extent of water surface features, leading to underestimation of facet slopes. A ray tracing algorithm indicated that reflectance was greatest when solar and view zenith angles were equal and the sensor scanned toward the Sun to capture specular reflections of the solar beam. Reflected energy was concentrated in a small portion of the sky, but rougher water surfaces reflected rays into a broader range of directions. Our framework facilitates flight planning to avoid surface-reflected radiance while mapping other river attributes, or to maximize this component to exploit relationships between hydraulics and surface reflectance. This initial analysis also highlighted the need for improved models of water surface topography in natural rivers.

  7. A framework for modeling connections between hydraulics, water surface roughness, and surface reflectance in open channel flows

    Science.gov (United States)

    Legleiter, Carl J.; Mobley, Curtis D.; Overstreet, Brandon T.

    2017-09-01

    This paper introduces a framework for examining connections between the flow field, the texture of the air-water interface, and the reflectance of the water surface and thus evaluating the potential to infer hydraulic information from remotely sensed observations of surface reflectance. We used a spatial correlation model describing water surface topography to illustrate the application of our framework. Nondimensional relations between model parameters and flow intensity were established based on a prior flume study. Expressing the model in the spatial frequency domain allowed us to use an efficient Fourier transform-based algorithm for simulating water surfaces. Realizations for both flume and field settings had water surface slope distributions positively correlated with velocity and water surface roughness. However, most surface facets were gently sloped and thus unlikely to yield strong specular reflections; the model exaggerated the extent of water surface features, leading to underestimation of facet slopes. A ray tracing algorithm indicated that reflectance was greatest when solar and view zenith angles were equal and the sensor scanned toward the Sun to capture specular reflections of the solar beam. Reflected energy was concentrated in a small portion of the sky, but rougher water surfaces reflected rays into a broader range of directions. Our framework facilitates flight planning to avoid surface-reflected radiance while mapping other river attributes, or to maximize this component to exploit relationships between hydraulics and surface reflectance. This initial analysis also highlighted the need for improved models of water surface topography in natural rivers.

  8. Neutron activation analysis to the profile surface sediments from several sites on the Havana Bay

    International Nuclear Information System (INIS)

    Diaz Riso, O.; Gelen, A.; Lopez, N.; Gonzalez, H.; Manso, M.V.; Graciano, A.M.; Nogueira, C.A.; Beltran, J.; Soto, J.

    2003-01-01

    Instrumental neutron activation analysis (INAA) technique was employed to analyze the surface sediments from several sites on the Havana Bay, Cuba. Measurements of heavy and trace elements in the sediments are reported. The results show that the concentration of the elements is site dependent. The data suggest that an anthropogenic input into the bay from domestic sewage and industries occurred

  9. Microplastics Baseline Surveys at the Water Surface and in Sediments of the North-East Atlantic

    NARCIS (Netherlands)

    Maes, Thomas; van der Meulen, Myra; Devriese, Lisa; Leslie, H.A.; Huvet, Arnaud; Frère, Laura; Robbens, Johan; Vethaak, A.D.

    2017-01-01

    Microplastic contamination was determined in sediments of the Southern North Sea and floating at the sea surface of NorthWest Europe. Floating concentrations ranged between 0 and 1.5 microplastic/m3, whereas microplastic concentrations in sediments ranged between 0 and 3,146 particles/kg dry weight

  10. Impacts on surface productivity during sediment dispersal experiment in Central Indian Basin

    Digital Repository Service at National Institute of Oceanography (India)

    LokaBharathi, P.A.; Nath, B.N.; Ingole, B.S.; Parthiban, G.; Matondkar, S.G.P.; Raghukumar, C.; Khadge, N.H.; Valsangkar, A.B.; Suryanarayana, A.; Jaisankar, S.; Sharma, R.

    conditions at the point of discharge thus altering the regimes of productivity in the water column. In order to assess the effects of deep sea sediment discharge on the oceanic surface water-layers (0-50M) after nodule mining, a Sediment Dispersal Experiment...

  11. Metal speciation in surface sediments of the Vigo Ria (NW Iberian Peninsula

    Directory of Open Access Journals (Sweden)

    María Jesús Belzunce Segarra

    2008-03-01

    Full Text Available Total concentrations and chemical forms of metals in surface sediments of the Vigo Ria (NW Iberian Peninsula were determined following the sequential extraction method proposed by Tessier et al. (1979. Total values ranged from 7 to 14 µgCo g-1, 52 to 76 µgCr g-1, 18 to 82 µgCu g g-1, 136 to 209 µgMn g g-1, 18 to 30 µgNi g g-1, 24 to 112 µgPb g g-1, 62 to 185 µgZn g g-1 and 18 to 34 mg g g-1 for Fe. The distribution of metals is strongly influenced by the presence of urban and industrial centres. A decreasing concentration trend was observed towards (i the outer-oceanic part of the ria and (ii the northern shore in the middle part. Cobalt, Cr, Fe, Mn, and Ni were found to be strongly associated with the residual fraction of the sediment (65-78%, whereas Cu is significantly present in the oxidisable phase (34-72% and Pb and Zn are found in both the reducible (14-49% and the oxidisable (14-39% phases. The speciation patterns reflect natural uncontaminated conditions in the outer part of the ria. However, a significant fraction of the Cu, Pb, and Zn in the sediments of the southern margin of the middle part of the ria, which supports most of the population and industrial activities, is present in labile forms, so a potential pollution risk may exist.

  12. Near surface velocity and Q S structure of the Quaternary sediment in Bohai basin, China

    Science.gov (United States)

    Chong, Jiajun; Ni, Sidao

    2009-10-01

    Heavily populated by Beijing and Tianjin cities, Bohai basin is a seismically active Cenozoic basin suffering from huge lost by devastating earthquakes, such as Tangshan earthquake. The attenuation ( Q P and Q S) of the surficial Quaternary sediment has not been studied at natural seismic frequency (1-10 Hz), which is crucial to earthquake hazards study. Borehole seismic records of micro earthquake provide us a good way to study the velocity and attenuation of the surficial structure (0-500 m). We found that there are two pulses well separated with simple waveforms on borehole seismic records from the 2006 M W4.9 Wen’an earthquake sequence. Then we performed waveform modeling with generalized ray theory (GRT) to confirm that the two pulses are direct wave and surface reflected wave, and found that the average ν P and ν S of the top 300 m in this region are about 1.8 km/s and 0.42 km/s, leading to high ν P/ ν S ratio of 4.3. We also modeled surface reflected wave with propagating matrix method to constrain Q S and the near surface velocity structure. Our modeling indicates that Q S is at least 30, or probably up to 100, much larger than the typically assumed extremely low Q (˜10), but consistent with Q S modeling in Mississippi embayment. Also, the velocity gradient just beneath the free surface (0-50 m) is very large and velocity increases gradually at larger depth. Our modeling demonstrates the importance of borehole seismic records in resolving shallow velocity and attenuation structure, and hence may help in earthquake hazard simulation.

  13. Assessment of Various Organic Matter Properties by Infrared Reflectance Spectroscopy of Sediments and Filters

    Science.gov (United States)

    Alaoui, G.; Leger, M.; Gagne, J.; Tremblay, L.

    2009-05-01

    The goal of this work was to evaluate the capability of infrared reflectance spectroscopy for a fast quantification of the elemental and molecular compositions of sedimentary and particulate organic matter (OM). A partial least-squares (PLS) regression model was used for analysis and values were compared to those obtained by traditional methods (i.e., elemental, humic and HPLC analyses). PLS tools are readily accessible from software such as GRAMS (Thermo-Fisher) used in spectroscopy. This spectroscopic-chemometric approach has several advantages including its rapidity and use of whole unaltered samples. To predict properties, a set of infrared spectra from representative samples must first be fitted to form a PLS calibration model. In this study, a large set (180) of sediments and particles on GFF filters from the St. Lawrence estuarine system were used. These samples are very heterogenous (e.g., various tributaries, terrigenous vs. marine, events such as landslides and floods) and thus represent a challenging test for PLS prediction. For sediments, the infrared spectra were obtained with a diffuse reflectance, or DRIFT, accessory. Sedimentary carbon, nitrogen, humic substance contents as well as humic substance proportions in OM and N:C ratios were predicted by PLS. The relative root mean square error of prediction (%RMSEP) for these properties were between 5.7% (humin content) and 14.1% (total humic substance yield) using the cross-validation, or leave-one out, approach. The %RMSEP calculated by PLS for carbon content was lower with the PLS model (7.6%) than with an external calibration method (11.7%) (Tremblay and Gagné, 2002, Anal. Chem., 74, 2985). Moreover, the PLS approach does not require the extraction of POM needed in external calibration. Results highlighted the importance of using a PLS calibration set representative of the unknown samples (e.g., same area). For filtered particles, the infrared spectra were obtained using a novel approach based on

  14. Modern sedimentation patterns in Lake El'gygytgyn, NE Russia, derived from surface sediment and inlet streams samples

    Directory of Open Access Journals (Sweden)

    V. Wennrich

    2013-01-01

    Full Text Available Lake El'gygytgyn/NE Russia holds a continuous 3.58 Ma sediment record, which is regarded as the most long-lasting climate archive of the terrestrial Arctic. Based on multi-proxy geochemical, mineralogical, and granulometric analyses of surface sediment, inlet stream and bedrock samples, supplemented by statistical methods, major processes influencing the modern sedimentation in the lake were investigated. Grain-size parameters and chemical elements linked to the input of feldspars from acidic bedrock indicate a wind-induced two-cell current system as major driver of sediment transport and accumulation processes in Lake El'gygytgyn. The distribution of mafic rock related elements in the sediment on the lake floor can be traced back to the input of weathering products of basaltic rocks in the catchment. Obvious similarities in the spatial variability of manganese and heavy metals indicate sorption or co-precipitation of these elements with Fe and Mn hydroxides and oxides. But the similar distribution of organic matter and clay contents might also point to a fixation to organic components and clay minerals. An enrichment of mercury in the inlet streams might be indicative of neotectonic activity around the lake. The results of this study add to the fundamental knowledge of the modern lake processes of Lake El'gygytgyn and its lake-catchment interactions, and thus, yield crucial insights for the interpretation of paleo-data from this unique archive.

  15. Variability of Surface Reflection Amplitudes of GPR Horn Antenna Depending on Distance between Antenna and Surface

    Directory of Open Access Journals (Sweden)

    Komačka Jozef

    2016-05-01

    Full Text Available The study focused on variability of surface reflections amplitudes of GPR horn antenna in relation to distance between an antenna and a surface is presented in the paper. The air-coupled antenna with the central frequency of 1 GHz was used in the investigation. Four types of surfaces (dry pavement, wet pavement, metal plate and composite layer from gypsum and wood were tested. The distance of antenna above the surfaces was changed in the range from 37.5 cm to 53.5 cm. The amplitudes of negative and positive peaks and their variability were analysed in relation to the distance of antenna above the surfaces. Moreover, the influence of changes in the peaks of negative and positive amplitudes on the total amplitudes was assessed. It was found out the amplitudes of negative peaks for all investigated surfaces were relatively consistent in the range from 40.5 cm to 48.5 cm and the moderate decline was identified in the case of amplitudes of positive peaks in the range of distances from 37.5 cm to 51.5 cm. This decline influences the tendency of total amplitudes. Based on the results of analysis it can be stated the distance of air-coupled antenna above the surface can influence the value of total amplitude and the differences depend on the type of surface.

  16. Environmental and geochemical assessment of surface sediments on irshansk ilmenite deposit area

    Directory of Open Access Journals (Sweden)

    Наталия Олеговна Крюченко

    2015-03-01

    Full Text Available It is revealed the problem of pollution of surface sediments of Irshansk ilmenite deposit area of various chemical elements hazard class (Mn, V, Ba, Ni, Co, Cr, Mo, Cu, Pb, Zn. It is determined its average content in surface sediments of various functional areas (forest and agricultural land, flood deposits, reclaimed land, calculated geochemical criteria, so given ecological and geochemical assessment of area

  17. Interactions of light with rough dielectric surfaces - Spectral reflectance and polarimetric properties

    Science.gov (United States)

    Yon, S. A.; Pieters, C. M.

    1988-01-01

    The nature of the interactions of visible and NIR radiation with the surfaces of rock and mineral samples was investigated by measuring the reflectance and the polarization properties of scattered and reflected light for slab samples of obsidian and fine-grained basalt, prepared to controlled surface roughness. It is shown that the degree to which radiation can penetrate a surface and then scatter back out, an essential criterion for mineralogic determinations based on reflectance spectra, depends not only upon the composition of the material, but also on its physical condition such as sample grain size and surface roughness. Comparison of the experimentally measured reflectance and polarization from smooth and rough slab materials with the predicted models indicates that single Fresnel reflections are responsible for the largest part of the reflected intensity resulting from interactions with the surfaces of dielectric materials; multiple Fresnel reflections are much less important for such surfaces.

  18. Effects of engineered nano-titanium dioxide on pore surface properties and phosphorus adsorption of sediment: Its environmental implications

    International Nuclear Information System (INIS)

    Luo, Zhuanxi; Wang, Zhenhong; Wei, QunShan; Yan, Changzhou; Liu, Feng

    2011-01-01

    Highlights: → The attachment of Enano-TiO 2 to surface enhanced markedly sediment BET surface area and t-Plot external surface area. → The fill of Enano-TiO 2 into the micropores reduced significantly the sediment t-Plot micropore surface area. → Enano-TiO 2 could increase sediment phosphorus (P) adsorption maximum and decrease in sediment P binding energy. → P would be easily released because of the decreasing P binding energy of the sediment with elevated Enano-TiO 2 . - Abstract: Understanding the environmental safety and human health implications of engineered nanoparticles (ENPs) is of worldwide importance. As an important ENPs, engineered nano-TiO 2 (Enano-TiO 2 ) may have been substantially deposited in aquatic sediments because of its widely uses. Sediment pore surface properties would be thus significantly influenced due to the large surface area of Enano-TiO 2 . In this study, Enano-TiO 2 was found to greatly impact on sediment pore surface properties. The attachment of Enano-TiO 2 particles to sediment surfaces enhanced markedly BET specific surface area and t-Plot external specific surface area, and thereby increased sediment phosphorus (P) adsorption maximum (S max ). Contrarily, the fill of Enano-TiO 2 particles into the micropores of sediments could significantly reduce t-Plot micropore specific surface area, and cause slight decrease in sediment P binding energy (K). Clearly, P sorbed in sediment would be easily released because of the decreasing P binding energy of the sediment with elevated Enano-TiO 2 . Enano-TiO 2 would thus cause aggravated endogenous pollution in water if such sediment was re-suspended on disturbance. The results obtained in this study contribute to our increasing knowledge of how to regulate physicochemical behavior of pollutants in sediments under the influences of Enano-TiO 2 and/or similar ENPs.

  19. RTM-based Teleseismic Reflection Tomography with Free Surface Multiples

    Science.gov (United States)

    Burdick, S. A.; De Hoop, M. V.; van der Hilst, R. D.

    2013-12-01

    Receiver function analysis of teleseismic converted and free surface reflected phases has long been a cornerstone of lithospheric studies. Discontinuities in elastic properties are revealed by deconvolving the incident wavefield from scattered phases and projecting the time differences to depth to form an image. The accuracy of the image is determined to a large extent by the accuracy of the method and background velocity model used, but popular approaches for projecting receiver functions to depth commonly rely on simplifying assumptions of a 1D velocity and planar discontinuities. In tectonically complex regions like subduction zones and rift systems, strong heterogeneity can create an ambiguous tradeoff between the background velocity and the depth of the discontinuities. Furthermore, such structures are apt to create caustics at high frequencies, rendering ray-based methods inadequate. In order to better constrain the background velocity and correctly place the discontinuities at depth, we employ a novel reverse-time migration (RTM) based reflection tomography method. We adapt our reflection tomography from exploration seismology for use with teleseismic phases. Active source methods for exploration have focused on the annihilation of extended images - image gathers formed with different subsurface angle or offset information - as a means of judging the accuracy of the model. Applying these approaches to teleseismic data is untenable because 1) the sparse and uneven distribution of earthquake sources leads to the incomplete construction of extended image, 2) the imperfect separation and source deconvolution of the scattered wavefield render previous error measurements unreliable, and 3) the planar geometry of incoming arrivals makes measures of subsurface offset insensitive to perturbations in the model. To overcome these obstacles, we have developed a flexible approach based on pairwise single-source image correlations. We determine the success of the RTM and

  20. Sedimentology and geochemistry of surface sediments, outer continental shelf, southern Bering Sea

    Science.gov (United States)

    Gardner, J.V.; Dean, W.E.; Vallier, T.L.

    1980-01-01

    Islands and the outer continental shelf and slope, indicates that Holocene sediment dynamics cannot be used to explain the observed distribution of surface sediment derived from the Aleutian Islands. We suggest that this pattern is relict and resulted from sediment dynamics during lower sea levels of the Pleistocene. ?? 1980.

  1. Patterns and controls of surface sediment distribution: West-central Florida inner shelf

    Science.gov (United States)

    Brooks, G.R.; Doyle, L.J.; Davis, R.A.; DeWitt, N.T.; Suthard, B.C.

    2003-01-01

    The west-central Florida inner shelf represents a transition between the quartz-dominated barrier-island system and the carbonate-dominated mid-outer shelf. Surface sediments exhibit a complex distribution pattern that can be attributed to multiple sediment sources and the ineffectiveness of physical processes for large-scale sediment redistribution. The west Florida shelf is the submerged extension of the Florida carbonate platform, consisting of a limestone karst surface veneered with a thin unconsolidated sediment cover. A total of 498 surface sediment samples were collected on the inner shelf and analyzed for texture and composition. Results show that sediment consists of a combination of fine quartz sand and coarse, biogenic carbonate sand and gravel, with variable but subordinate amounts of black, phosphorite-rich sand. The carbonate component consists primarily of molluskan fragments. The distribution is patchy and discontinuous with no discernible pattern, and the transition between sediment types is generally abrupt. Quartz-rich sediment dominates the inner 15 km north of the entrance into Tampa Bay, but south of the Bay is common only along the inner 3 km. Elsewhere, carbonate-rich sediment is the predominate sediment type, except where there is little sediment cover, in which cases black, phosphorite-rich sand dominates. Sediment sources are likely within, or around the periphery of the basin. Fine quartz sand is likely reworked from coastal units deposited during Pleistocene sea-level high stands. Carbonate sand and gravel is produced by marine organisms within the depositional basin. The black, phosphorite-rich sand likely originates from the bioerosion and reworking of the underlying strata that irregularly crop out within the study area. The distribution pattern contains elements of both storm- and tide-dominated siliciclastic shelves, but it is dictated primarily by the sediment source, similar to some carbonate systems. Other systems with similar

  2. Sedimentation

    Science.gov (United States)

    Cliff R. Hupp; Michael R. Schening

    2000-01-01

    Sedimentation is arguably the most important water-quality concern in the United States. Sediment trapping is cited frequently as a major function of riverine-forested wetlands, yet little is known about sedimcntation rates at the landscape scale in relation to site parameters, including woody vegetation type, elevation, velocity, and hydraulic connection to the river...

  3. Mercapto-based coupling agent for improved thermophotovoltaic device back surface reflector adhesion and reflectance

    Energy Technology Data Exchange (ETDEWEB)

    Wernsman, Bernard; Fiedor, Joseph N.; Irr, Lawrence G.; Palmisiano, Marc N.

    2016-10-04

    A back surface reflector (BSR) is described. The BSR includes a reflecting layer, a substrate and an adhesion layer between the reflecting layer and the substrate. The adhesion layer includes 3-mercaptopropyl (trimethoxy) silane (a.k.a. Merc).

  4. Soil, Groundwater, Surface Water, and Sediments of Kennedy Space Center, Florida: Background Chemical and Physical Characteristics

    Science.gov (United States)

    Shmalzer, Paul A.; Hensley, Melissa A.; Mota, Mario; Hall, Carlton R.; Dunlevy, Colleen A.

    2000-01-01

    This study documented background chemical composition of soils, groundwater, surface; water, and sediments of Kennedy Space Center. Two hundred soil samples were collected, 20 each in 10 soil classes. Fifty-one groundwater wells were installed in 4 subaquifers of the Surficial Aquifer and sampled; there were 24 shallow, 16 intermediate, and 11 deep wells. Forty surface water and sediment samples were collected in major watershed basins. All samples were away from sites of known contamination. Samples were analyzed for organochlorine pesticides, aroclors, chlorinated herbicides, polycyclic aromatic hydrocarbons (PAH), total metals, and other parameters. All aroclors (6) were below detection in all media. Some organochlorine pesticides were detected at very low frequencies in soil, sediment, and surface water. Chlorinated herbicides were detected at very low frequencies in soil and sediments. PAH occurred in low frequencies in soiL, shallow groundwater, surface water, and sediments. Concentrations of some metals differed among soil classes, with subaquifers and depths, and among watershed basins for surface water but not sediments. Most of the variation in metal concentrations was natural, but agriculture had increased Cr, Cu, Mn, and Zn.

  5. Analysis of Heavy Metals in Surface Sediments from Agh Gel Wetland, Iran

    Directory of Open Access Journals (Sweden)

    Soheil Sobhanardakani

    2016-06-01

    Full Text Available Background: Soil and sediment serve as major reservoir for contaminants as they possess ability to bind various chemicals together. In this study the concentrations of heavy metals Cd, Cr and Cu were analyzed in surface sediments of Agh Gel Wetland in west of Iran. Methods: The sediment samples were taken from 10 stations. The samples were subjected to bulk digestion and chemical partitioning and Cd, Cr and Cu concentrations of the sediments were determined by ICP-OES. Geo-accumulation index (I-geo, Contamination factor (CF and Pollution load index (PLI were used to evaluate the magnitude of contaminants in the sediment profile. Results: The mean sediment concentrations (mg kg-1 dry weight ranged within 0.20-0.29 (Cd, 58-71 (Cr and 23-36 (Cu. According to the I-geo values, the sediments' qualities are classified as unpolluted to moderately polluted category. According to the CF values, the sediments' qualities are classified as low to moderate contamination. Furthermore, the PLI values indicated that there were no metal pollution exists for all sampling stations. Conclusion: The Agh Gel Wetland is potential to be threatened by chemical pollutants such as agricultural effluent. So to preserve the environment of the Agh Gel Wetland from deterioration, periodically monitoring of the water and sediment qualities is recommended.

  6. Geochemistry and particle size of surface sediments of Gulf of Manfredonia (Southern Adriatic sea)

    Science.gov (United States)

    Spagnoli, F.; Bartholini, G.; Dinelli, E.; Giordano, P.

    2008-10-01

    In this study we describe mechanisms influencing the spatial distribution of the surface sediments in the Gulf of Manfredonia. Seventy-three samples were collected on a regional grid and analyzed for grain-size, major and trace elements and organic matter content. Sediments contain marine-derived carbonate as well as terrigenous fractions indicating highly heterogeneous sediment composition dictated by different provenance and complex transport processes. Principal Component Analysis provides information about processes involved in the formation and dispersal of the sediments. The regional sediment distribution is function of the Gulf's morphology and sedimentary inputs from fluvial sources, mainly from the Ofanto River, and from the North and Central Adriatic basin. Biogenic carbonate reefs, identified in two restricted coastal areas add complexity to sediment shelf dispersal. The North-Adriatic current flowing southward transports and deposits sediments from the Northern basin in the offshore area of the Gulf while an inner anticyclonic current distributes and mixes northern and fluvial sediment with a clockwise pattern. In order to better assess the fluvial contribution also bedload samples from the main river debouching into the Gulf were sampled, enabling the identification of geochemical indexes to distinguish the role of both fluvial inputs and hydrodynamic processes affecting solid particles dispersion within the Gulf. This study provides a contribution to a qualitative estimate of the sediment supply entailed in the Southwestern Adriatic basin.

  7. Reconstruction of Satellite-Retrieved Land-Surface Reflectance Based on Temporally-Continuous Vegetation Indices

    Directory of Open Access Journals (Sweden)

    Zhiqiang Xiao

    2015-07-01

    Full Text Available Land-surface reflectance, estimated from satellite observations through atmospheric corrections, is an essential parameter for further retrieval of various high level land-surface parameters, such as leaf area index (LAI, fraction of absorbed photosynthetically active radiation (FAPAR, and surface albedo. Although great efforts have been made, land-surface reflectance products still contain considerable noise caused by, e.g., cloud or mixed-cloud pixels, which results in temporal and spatial inconsistencies in subsequent downstream products. In this study, a new method is developed to remove the residual clouds in the Moderate Resolution Imaging Spectroradiometer (MODIS land-surface reflectance product and reconstruct time series of surface reflectance for the red, near infrared (NIR, and shortwave infrared (SWIR bands. A smoothing method is introduced to calculate upper envelopes of vegetation indices (VIs from the surface reflectance data and the cloud contaminated reflectance data are identified using the time series VIs and the upper envelopes of the time series VIs. Surface reflectance was then reconstructed according to cloud-free surface reflectance by incorporating the upper envelopes of the time series VIs as constraint conditions. The method was applied to reconstruct time series of surface reflectance from MODIS/TERRA surface reflectance product (MOD09A1. Temporal consistency analysis indicates that the new method can reconstruct temporally-continuous time series of land-surface reflectance. Comparisons with cloud-free MODIS/AQUA surface reflectance product (MYD09A1 over the BELMANIP (Benchmark Land Multisite Analysis and Intercomparison of Products sites in 2003 demonstrate that the new method provides better performance for the red band (R2 = 0.8606 and RMSE = 0.0366 and NIR band (R2 = 0.6934 and RMSE = 0.0519, than the time series cloud detection (TSCD algorithm (R2 = 0.5811 and RMSE = 0.0649; and R2 = 0.5005 and RMSE = 0

  8. Radiolarian abundance and geochemistry of the surface-sediments from the Central Indian Basin: Inferences to Antarctic bottom water current

    Digital Repository Service at National Institute of Oceanography (India)

    Gupta, S.M.; Jauhari, P.

    The distribution trend of numbers of radiolarian shells/gram dry sediment, biogenic silica, organic carbon, and the carbon/nitrogen ratios in the surface sediments of the Central Indian Basin is similar. Ratios of two suborders of radiolaria, i...

  9. Heavy metal concentrations in the surface marine sediments of Sfax Coast, Tunisia.

    Science.gov (United States)

    Gargouri, Dorra; Azri, Chafai; Serbaji, Mohamed Moncef; Jedoui, Younes; Montacer, Mabrouk

    2011-04-01

    Sixty-seven surface marine sediment samples in the Sfax (Tunisia) were analyzed by inductively coupled plasma-atomic emission spectrometry for seven heavy metals (Pb, Ni, Cu, Cr, Zn, Cd, and Fe). Metal concentrations were compared with natural values, marine sediment quality standards, and also with other results concerning sediments from several Mediterranean coasts. The study of their spatial distributions refined by complementary approaches including principal component analysis, enrichment factors, and geoaccumulation index showed a significant impact of multiple anthropogenic sources. These included industrial sources and municipal discharges of the urban Sfax and also non-controlled discharges in rural zones close to the coastline. Moderate pollution of sediments, especially by Pb, Zn, and Ni, was shown to exist in localized sites. Besides, it was shown that other sites, slightly to highly enriched in terms of Cu, Cr, and Cd, are characterized by a quality of sediments varying from unpolluted to moderately polluted.

  10. Microplastics Baseline Surveys at the Water Surface and in Sediments of the North-East Atlantic

    Directory of Open Access Journals (Sweden)

    Thomas Maes

    2017-05-01

    Full Text Available Microplastic contamination was determined in sediments of the Southern North Sea and floating at the sea surface of North West Europe. Floating concentrations ranged between 0 and 1.5 microplastic/m3, whereas microplastic concentrations in sediments ranged between 0 and 3,146 particles/kg dry weight sediment. In sediments, mainly fibers and spheres were found, whereas at the sea surface fragments were dominant. At the sea surface, concentrations of microplastics are lower and more variable than in sediments, meaning that larger sample sizes and water volumes are required to find detectable concentrations. We have calculated the widths of the confidence intervals (CI for different sample sizes, to give a first indication of the necessary sample size for a microplastic survey at the water surface. Higher concentrations of floating microplastics were found near estuaries. In sediments, estuaries and areas with a high organic carbon content were likely hotspots. Standardization of monitoring methods within marine regions is recommended to compare and assess microplastics pollution over time.

  11. Factors influencing prokaryotic community structure composition in sub-surface coastal sediments

    Science.gov (United States)

    Molari, Massimiliano; Giovannelli, Donato; d'Errico, Giuseppe; Manini, Elena

    2012-01-01

    Despite the major influence of the marine sub-surface area in carbon cycling and global biogeochemistry, there is little known of prokaryotic distribution and community structure information of the marine sub-surface and the factors that influence sub-surface prokaryotic assemblages. We provide quantitative estimations of active Bacteria and Archaea down vertical profiles of sub-surface coastal sediments from the southern Adriatic Sea (Manfredonia Gulf). Prokaryotic biomass, carbon incorporation and the metabolically active fraction were compared with environmental, trophic, and predatory variables down 100-cm sediment cores sectioned into 21 layers. Multiple regression analysis was used to identify variables that can explain the variance of community compositions down vertical profiles. CARD-FISH analysis showed Bacteria dominance for the first 11 cm below sediment surface. The community then changed significantly at increasing depth, towards Archaea dominance. The models tested show that prokaryotic abundance in superficial marine sediments is controlled by organic trophic resources, while in sub-surface sediments, active prokaryotic abundance is driven by environmental factors and predatory pressure, suggesting that the shift in prokaryotic community structure could be coupled to a change in life-style of microbial assemblages.

  12. Characteristics and Distribution of Phosphorus in Surface Sediments of Limnetic Ecosystem in Eastern China.

    Directory of Open Access Journals (Sweden)

    Wenqiang Zhang

    Full Text Available Phosphorus (P is an essential nutrient for aquatic organisms; however, excessive P inflow to limnetic ecosystems can induce eutrophication. P concentrations in the rivers, wetlands and lakes of Eastern China have been amplified by fertilizer and sewage inputs associated with the development of industry and agriculture. Yet, knowledge of the distribution and speciation of P is lacking at the regional scale. We determined the distribution and speciation of P in limnetic ecosystems in Eastern China using Standards, Measurements and Testing (SMT and phosphorus nuclear magnetic resonance (31P-NMR. The results indicate that P pollution in surface sediments was serious. Inorganic P (Pi was the primary drive of variation in total P (TP among different river systems, and Pi accounted for 71% to 90% of TP in surface sediment in Eastern China. Also, the concentrations of TP and Pi varied among watersheds and Pi primarily drove the variation in TP in different watersheds. Sediments less than 10-cm deep served as the main P reservoir. Environmental factors affect the speciation and origin of P. NaOH-Pi, HCl-Pi and organic P (Po were related to pH accordingly at the regional scale. The physicochemical properties of sediments from different limnetic ecosystems affect the P speciation. HCl-Pi was higher in wetland sediments than in riverine and lake sediments in Eastern China. Conversely, NaOH-Pi was lowest in wetland sediments. Total Po concentration was lower in riverine sediments than in other sediments, but Mono-P was higher, with an average concentration of 48 mg kg-1. Diesters-P was highest in lake sediments. By revealing the regional distribution of TP, Pi and Po, this study will support eutrophication management in Eastern China.

  13. Quantifying exchange between groundwater and surface water in rarely measured organic sediments

    Science.gov (United States)

    Rosenberry, D. O.; Cavas, M.; Keith, D.; Gefell, M. J.; Jones, P. M.

    2016-12-01

    Transfer of water and chemicals between poorly competent organic sediments and surface water in low-energy riverine and lentic settings depends on several factors, including rate and direction of flow, redox state, number and type of benthic invertebrates, and chemical gradients at and near the sediment-water interface. In spite of their commonly large areal extent, direct measurements of flow in soft, organic sediments are rarely made and little is known about flux direction, rate, or heterogeneity. Commonly used monitoring wells are difficult to install and suffer from slow response to changing hydraulic head due to the low permeability of these sediments. Seepage meters can directly quantify seepage flux if several challenges can be overcome. Meters are difficult to install and operate where water is deep, visibility is poor, and the position of the sediment-water interface is not readily apparent. Soft, easily eroded sediment can be displaced during meter installation, creating bypass flow beneath the bottom of the seepage cylinder. Poorly competent sediments often cannot support the weight of the meters; they slowly sink into the bed and displace water inside the seepage cylinder, which leads to the interpretation of large upward flow. Decaying organic material within the sediment generates gas that can displace water and corrupt seepage-meter measurements. Several inexpensive modifications to a standard seepage meter, as well as precautions during installation and operation, can minimize these sources of error. Underwater video cameras can be mounted to the meter to remotely observe sediment disturbance during sensor installation and monitor the stability of the meter insertion depth during the period of deployment. Anchor rods can be driven a meter or more into the sediment until refusal, firmly anchoring the seepage meter at a constant sediment insertion depth. Data collected from modified seepage meters installed in Minnesota and New York demonstrate the

  14. Uranium series disequilibrium in the coastal surface sediments and sea water of the Arabian sea

    Digital Repository Service at National Institute of Oceanography (India)

    Joshi, L.U.; Zingde, M.D.

    activity ratios in leachates, and residues after removal of surface organic matter from the sediment particles by treatment with hydrogen peroxide and 0.05M HCl, revealed disequilibrium between sup(238) U and sup(234) U only in the surface organic matter...

  15. Heavy metals levels in surface waters and sediments in an oilfield in ...

    African Journals Online (AJOL)

    Heavy metal levels in the surface waters and sediments from five sampling stations of the Bukuma oilfield, in the Niger Delta, Nigeria were investigated using the AAS technique after standard procedures of storage and extraction. Mean range (mg/l) in the surface waters varied from Zn (0.19 0.64); Pb (ND 0.60); Cd (ND ...

  16. Distribution of heavy metals and environmental assessment of surface sediment of typical estuaries in eastern China.

    Science.gov (United States)

    Bi, Shipu; Yang, Yuan; Xu, Chengfen; Zhang, Yong; Zhang, Xiaobo; Zhang, Xianrong

    2017-08-15

    Estuary sediment is a major pollutant enrichment medium and is an important biological habitat. This sediment has attracted the attention of the marine environmental scientists because it is a more stable and effective medium than water for monitoring regional environmental quality conditions and trends. Based on a large amount of measurement data, we analyzed the concentrations, distribution, and sources of seven heavy metals (As, Cd, Cr, Cu, Hg, Pb, and Zn) in the surface sediment of typical estuaries that empty into the sea in eastern China: the Liaohe River Estuary, Yellow River Estuary, Yangtze River Estuary, Minjiang River Estuary, and Pearl River Estuary. The heavy metal concentrations in the sediments vary considerably from one estuary to the next. The Liaohe River Estuary sediment contains elevated levels of Cd, Hg, and Zn. The Yellow River Estuary sediment contains elevated levels of As. The sediments in the Yangtze River and Minjiang River estuaries contain elevated levels of Cd and Cu and of Pb and Zn, respectively. The sediment in the Pearl River Estuary contains elevated levels of all seven heavy metals. We used the Nemerow index method to assess the environment quality. The heavy metal pollution in the Liaohe River and Pearl River estuaries is more severe than that in the other estuaries. Additional work indicates that the heavy metal pollution in the Liaohe River and Pearl River estuaries is caused mainly by human activity. Copyright © 2017. Published by Elsevier Ltd.

  17. Phosphorus forms of the surface sediment in the Iranian coast of the southern Caspian Sea

    OpenAIRE

    Nasrollahzadeh Saravi, H.; Pouraria, A.; Nowruzi, B.

    2015-01-01

    Sediments from the southern Caspian Sea, located in Iranian coast were examined on the basis of P-fractionation (five forms of phosphorus) by a sequential extraction scheme. Ninety-six surface sediment samples (for each season with triplicate) were collected from eight sampling transects in 10 and 100 m depths during summer and winter in 2010-2011. The result indicated that the most abundant forms of phosphorus were calcium bound phosphorus. Relative abundance of other forms of phosphorus fol...

  18. VIIRS/NPP Surface Reflectance 8-Day L3 Global 500m SIN Grid V001

    Data.gov (United States)

    National Aeronautics and Space Administration — The 8-day Visible Infrared Imaging Radiometer Suite (VIIRS) Surface Reflectance (VNP09H1) Version 1 composite product provides an estimate of land surface...

  19. Effects of engineered nano-titanium dioxide on pore surface properties and phosphorus adsorption of sediment: its environmental implications.

    Science.gov (United States)

    Luo, Zhuanxi; Wang, Zhenhong; Wei, Qunshan; Yan, Changzhou; Liu, Feng

    2011-09-15

    Understanding the environmental safety and human health implications of engineered nanoparticles (ENPs) is of worldwide importance. As an important ENPs, engineered nano-TiO(2) (Enano-TiO(2)) may have been substantially deposited in aquatic sediments because of its widely uses. Sediment pore surface properties would be thus significantly influenced due to the large surface area of Enano-TiO(2). In this study, Enano-TiO(2) was found to greatly impact on sediment pore surface properties. The attachment of Enano-TiO(2) particles to sediment surfaces enhanced markedly BET specific surface area and t-Plot external specific surface area, and thereby increased sediment phosphorus (P) adsorption maximum (S(max)). Contrarily, the fill of Enano-TiO(2) particles into the micropores of sediments could significantly reduce t-Plot micropore specific surface area, and cause slight decrease in sediment P binding energy (K). Clearly, P sorbed in sediment would be easily released because of the decreasing P binding energy of the sediment with elevated Enano-TiO(2). Enano-TiO(2) would thus cause aggravated endogenous pollution in water if such sediment was re-suspended on disturbance. The results obtained in this study contribute to our increasing knowledge of how to regulate physicochemical behavior of pollutants in sediments under the influences of Enano-TiO(2) and/or similar ENPs. Copyright © 2011 Elsevier B.V. All rights reserved.

  20. Heavy metal contamination in surface runoff sediments of the urban area of Vilnius, Lithuania

    Directory of Open Access Journals (Sweden)

    Gytautas Ignatavičius

    2017-02-01

    Full Text Available Surface runoff from urbanized territories carries a wide range of pollutants. Sediments in untreated runoff from direct discharge stormwater systems significantly contribute to urban waterway pollution. In this study, heavy metal (Pb, Zn, Cu, Cr, Ba, As and Fe contamination in surface runoff sediments of the urban area of the city of Vilnius was investigated. The surface runoff sediment samples were collected from seven dischargers with the highest volume rate of water flow and concentrations of suspended solids. The geospatial analysis of the distribution of heavy metals shows that there are several active pollution sources supplying the dischargers with contaminated sediments. Most of these areas are located in the central part of the city and in old town with intense traffic. Principal components analysis and t-test results clearly depicted the significantly different chemical compositions of winter and autumn surface sediment samples. The sampling approach and assessment of results provide a useful tool to examine the contamination that is generated in urban areas, distinguish pollution sources and give a better understanding of the importance of permeable surfaces and green areas.

  1. Mathematical simulation of sediment and contaminant transport in surface waters. Annual report, October 1977--September 1978

    International Nuclear Information System (INIS)

    Onishi, Y.; Arnold, E.M.; Serne, R.J.; Cowan, C.E.; Thompson, F.L.; Mayer, D.W.

    1979-01-01

    Various pathways exist for exposure of humans and biota to radioactive materials released from nuclear facilities. Hydrologic transport (liquid pathway) is one element in the evaluation of the total radiation dose to man. Mathematical models supported by well-planned field data collection programs can be useful tools in assessing the hydrologic transport and ultimate fate of radionuclides. Radionuclides with high distribution coefficients or radionuclides in surface waters with high suspended sediment concentrations are, to a great extent, adsorbed by river and marine sediments. Thus, otherwise dilute contaminants are concentrated. Contaminated sediments may be deposited on the river and ocean beds creating a significant pathway to man. Contaminated bed sediment in turn may become a long-term source of pollution through desorption and resuspension. In order to assess migration and accumulation of radionuclides in surface waters, mathematical models must correctly simulate essential mechanisms of radionuclide transport. The objectives of this study were: (1) to conduct a critical review of (a) radionuclide transport models as well as sediment transport and representative water quality models in rivers, estuaries, oceans, lakes, and reservoirs, and (b) adsorption and desorption mechanisms of radionuclides with sediments in surface waters; (2) to synthesize a mathematical model capable of predicting short- and long-term transport and accumulation of radionuclides in marine environments

  2. Microbial ecological associations in the surface sediments of Bohai strait

    Science.gov (United States)

    Wang, Bin; Liu, Hongmei; Tang, Haitian; Hu, Xiaoke

    2017-09-01

    Microbial communities play key roles in the marine ecosystem. Despite a few studies on marine microbial communities in deep straits, ecological associations among microbial communities in the sediments of shallow straits have not been fully investigated. The Bohai Strait in northern China (average depth less than 20 m) separates the Bohai Sea from the Yellow Sea and has organic-rich sediments. In this study, in the summer of 2014, six stations across the strait were selected to explore the taxonomic composition of microbial communities and their ecological associations. The four most abundant classes were Gammaproteobacteria, Deltaproteobacteria, Bacilli and Flavobacteriia. Temperature, total carbon, depth, nitrate, fishery breeding and cold water masses influenced the microbial communities, as suggested by representational difference and composition analyses. Network analysis of microbial associations revealed that key families included Flavobacteriaceae, Pirellulaceae and Piscirickettsiaceae. Our findings suggest that the families with high phylogenetic diversity are key populations in the microbial association network that ensure the stability of microbial ecosystems. Our study contributes to a better understanding of microbial ecology in complex hydrological environments.

  3. Light Reflection from Water Surfaces Perturbed by Falling Rain Droplets

    Science.gov (United States)

    Molesini, Giuseppe; Vannoni, Maurizio

    2009-01-01

    An account of peculiar light patterns produced by reflection in a pool under falling rain droplets was recently reported by Molesini and Vannoni (2008 Eur. J. Phys. 29 403-11). The mathematical approach, however, only covered the case of a symmetrical location of a light source and the observer's eyes with respect to the vertical of the falling…

  4. An instrument for the measurement of road surface reflection properties

    DEFF Research Database (Denmark)

    Corell, Dennis Dan; Sørensen, K.

    2017-01-01

    surfaces in use have changed - for instance to road surface types with less noise from wheel passages. Because of this, a co-operation between the road administrations of the Nordic countries (abbreviated NMF) decided to construct a portable instrument to be used on selections of traffic roads within...

  5. Orientation effect of ion flux splitting reflected from Wehner cone on solid surface

    CERN Document Server

    Bratchenko, M I; Rozhkov, V V

    2001-01-01

    It is shown that simple geometrical model of specular reflection of particles from the surface of Wehner cone (frequently observed feature of solid surface macroscopic topography developed under ion bombardment) can describe qualitatively the essential characteristics of the reflected particles flux splitting effect predicted earlier by means of computer simulation methods.

  6. UPWARD MOVEMENT OF PLUTONIUM TO SURFACE SEDIMENTS DURING AN 11-YEAR FIELD STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Kaplan, D.; Beals, D.; Cadieux, J.; Halverson, J.

    2010-01-25

    An 11-y lysimeter study was established to monitor the movement of Pu through vadose zone sediments. Sediment Pu concentrations as a function of depth indicated that some Pu moved upward from the buried source material. Subsequent numerical modeling suggested that the upward movement was largely the result of invading grasses taking up the Pu and translocating it upward. The objective of this study was to determine if the Pu of surface sediments originated from atmosphere fallout or from the buried lysimeter source material (weapons-grade Pu), providing additional evidence that plants were involved in the upward migration of Pu. The {sup 240}Pu/{sup 239}Pu and {sup 242}Pu/{sup 239}Pu atomic fraction ratios of the lysimeter surface sediments, as determined by Thermal Ionization Mass Spectroscopy (TIMS), were 0.063 and 0.00045, respectively; consistent with the signatures of the weapons-grade Pu. Our numerical simulations indicate that because plants create a large water flux, small concentrations over multiple years may result in a measurable accumulation of Pu on the ground surface. These results may have implications on the conceptual model for calculating risk associated with long-term stewardship and monitored natural attenuation management of Pu contaminated subsurface and surface sediments.

  7. Atrazine, triketone herbicides, and their degradation products in sediment, soil and surface water samples in Poland.

    Science.gov (United States)

    Barchanska, Hanna; Sajdak, Marcin; Szczypka, Kornelia; Swientek, Angelika; Tworek, Martyna; Kurek, Magdalena

    2017-01-01

    The aim of this study was to monitor the sediment, soil and surface water contamination with selected popular triketone herbicides (mesotrione (MES) and sulcotrione(SUL)), atrazine (ATR) classified as a possible carcinogen and endocrine disrupting chemical, as well as their degradation products, in Silesia (Poland). Seventeen sediment samples, 24 soil samples, and 64 surface water samples collected in 2014 were studied. After solid-liquid extraction (SLE) and solid phase extraction (SPE), analytes were determined by high-performance liquid chromatography (HPLC) with diode array detection (DAD). Ten years after the withdrawal from the use, ATR was not detected in any of the collected samples; however, its degradation products are still present in 41 % of sediment, 71 % of soil, and 8 % of surface water samples. SUL was determined in 85 % of soil samples; its degradation product (2-chloro-4-(methylosulfonyl) benzoic acid (CMBA)) was present in 43 % of soil samples. In 17 % of sediment samples, CMBA was detected. Triketones were detected occasionally in surface water samples. The chemometric analysis (clustering analysis (CA), single-factor analysis of variance (ANOVA), N-Way ANOVA) was applied to find relations between selected soil and sediment parameters and herbicides concentration. In neither of the studied cases a statistically significant relationship between the concentrations of examined herbicides, their degradation products and soil parameters (organic carbon (OC), pH) was observed.

  8. Determining surface water and bed sediment quality of Lake Kopa

    Directory of Open Access Journals (Sweden)

    Nurgul Kazangapovaa

    2016-10-01

    Full Text Available In this research, the results of a hydro-chemical study of Lake Kopa in Kazakhstan are described, in the context of the regional geography and aggravating ecological problems of the lake. Besides analyzing the concentrations of all major ions, heavy-metal ions and other pollutants, their vertical and horizontal distribution were also assessed. Moreover, water pollution indices (WPI were calculated for individual ions, classes of pollutants, and total pollution, revealing serious overload of human- induced pollution within the lake’s ecosystem. Concentrations of major ions and WPI were monitored over 2009-2013 period, revealing a distinct seasonal pattern and a multi-year periodicity in respect to the measured parameters. In addition, studying ion exchange between lake water and bottom sediment showed complex non-equilibrium processes besides leaching out Ca2+ and its exchange for Na+.

  9. Polycyclic aromatic hydrocarbons in surface sediments from drinking water sources of Taihu Lake, China: sources, partitioning and toxicological risk

    Energy Technology Data Exchange (ETDEWEB)

    Tao, Y.Q.; Yao, S.C.; Xue, B.; Deng, J.C.; Wang, X.L.; Feng, M.H.; Hu, W.P. [Chinese Academy of Sciences, Nanjing (China)

    2010-12-15

    Sources, partitioning and toxicological risk of 15 priority polycyclic aromatic hydrocarbons (PAHs) in surface sediments from drinking water sources of Taihu Lake, with an area of 2428 km{sup 2} located in the most developed and populated area of China, were studied, and the results were compared with those in other lakes of China and the USA. Concentrations of the 15 PAHs in sediments ranged from 436.6 to 1334.9 ng g{sup -1} (dw). Gasoline combustion, coal combustion, diesel combustion from shipping and spillage of petroleum were apportioned to be the main sources of PAHs in this area by principal component analysis, which contributed 35.19%, 26.43%, 25.41% and 12.97% to the PAH sources estimated by further multiple linear regression. Levels of PAHs in sediments were negatively correlated with contents of clay and fine silt (<16 {mu} m), while positively with contents of medium silt, coarse silt and sand (>16 {mu} m). Humin with size larger than 16 mu m contained the largest part of the burden of PAHs in sediments, but the specific partitioning domain (bound humic acid, lipid or insoluble residue) depended on properties of organic matter reflected by optical absorbance at 465 and 665 nm. Total toxic benzo(a)pyrene equivalent (TEQ(care)) of the carcinogenic PAHs in sediments varied from 31.8 to 209.3 ngTEQ(care) g{sup -1}. Benzo(a)pyrene and dibenzo(a,h)anthracene contributed 45.36 and 25.31% to total TEQ(care), posing high toxicological risk to this area.

  10. A Monte Carlo reflectance model for soil surfaces with three-dimensional structure

    Science.gov (United States)

    Cooper, K. D.; Smith, J. A.

    1985-01-01

    A Monte Carlo soil reflectance model has been developed to study the effect of macroscopic surface irregularities larger than the wavelength of incident flux. The model treats incoherent multiple scattering from Lambertian facets distributed on a periodic surface. Resulting bidirectional reflectance distribution functions are non-Lambertian and compare well with experimental trends reported in the literature. Examples showing the coupling of the Monte Carlo soil model to an adding bidirectional canopy of reflectance model are also given.

  11. Liquid Atomization Induced by Pulse Laser Reflection underneath Liquid Surface

    Science.gov (United States)

    Utsunomiya, Yuji; Kajiwara, Takashi; Nishiyama, Takashi; Nagayama, Kunihito; Kubota, Shiro; Nakahara, Motonao

    2009-05-01

    We observed a novel effect of pulse laser reflection at the interface between transparent materials with different refractive indices. The electric field intensity doubles when a laser beam is completely reflected from a material with a higher refractive index to a material with a lower index. This effect appreciably reduces pulse laser ablation threshold of transparent materials. We performed experiments to observe the entire ablation process for laser incidence on the water-air interface using pulse laser shadowgraphy with high-resolution film; the minimum laser fluence for laser ablation at the water-air interface was approximately 12-16 J/cm2. We confirmed that this laser ablation occurs only when the laser beam is incident on the water-air interface from water. Many slender liquid ligaments extend like a milk crown and seem to be atomized at the tip. Their detailed structures can be resolved only by pulse laser photography using high-resolution film.

  12. Reflectivity reduction of retro-reflector installed in LHD due to plasma surface interaction

    International Nuclear Information System (INIS)

    Yoshida, N.; Ohtawa, Y.; Ebihara, A.; Akiyama, T.; Tokitani, M.; Ashikawa, N.; Kawahata, K.

    2008-10-01

    Optical reflectivity of the retro-reflector installed in LHD as the first mirror was reduced seriously by plasma wall interaction. In order to understand the mechanism of the reflectivity reduction, optical and material properties of the mirror surfaces have been examined extensively. It was found that the deposited impurity layers caused the serious reduction of the reflectivity. Formation of iron oxide, bulges structure and He bubbles are the major factors for the reflectivity reduction in the wide wave length range. (author)

  13. Nickel, Lead and Zinc Contamination in the Surface Sediments of Agh Gel Wetland, Iran

    Directory of Open Access Journals (Sweden)

    Soheil Sobhan Ardakani

    2016-07-01

    Full Text Available Background & Aims of the Study: Due to the increased human activities around the Agh Gel wetland, this study aimed to measured accumulations of heavy metals (Ni, Pb and Zn in the surface sediment samples taken from this wetland. Materials & Methods: Samples were taken from 10 stations and exposed to bulk digestion and chemical partitioning. Finally, Ni, Pb and Zn concentrations were monitored with ICP-OES in the sediments. Also, geo-accumulation index, contamination factor and pollution load index were used to evaluate the magnitude of contaminants in the sediment profile. Results: The results showed, the average of metal concentration in samples (mg kg-1 wet weight were 34.20±3.58 for Ni, 25.37±2.52 for Pb and 127.20±15.21 for Zn, respectively. Therefore, the pattern of metal concentrations in sediment was determined as Zinc>Nickel >Lead. According to the mean I-geo values, sediments' qualities are classified as unpolluted category for Ni and Pb. Also, sediment's quality is classified as unpolluted to moderately polluted for Zn. The CF values for all elements are classified as moderate contamination. The PLI values indicated that metal pollution exists for all sampling stations. Conclusions: The obtained results indicated that the Agh Gel wetland has a potential to threaten by chemical pollutants such as agricultural effluent. So, in order to preserve the environment of the Agh Gel wetland from deterioration, monitoring of water and sediment qualities is recommended periodically.

  14. APPLICATION OF SEDIMENT QUALITY GUIDELINES IN THE ASSESSMENT OF MANGROVE SURFACE SEDIMENT IN MENGKABONG LAGOON, SABAH, MALAYSIA

    OpenAIRE

    S. M. Praveena, M. Radojevic, M. H. Abdullah, A. Z. Aris

    2008-01-01

    There have been numerous sediment quality guidelines developed to monitor the sediments. Sediment quality guidelines are very useful to screen sediment contamination by comparing sediment contaminant concentration with the corresponding quality guideline, provide useful tools for screening sediment chemical data to identify pollutants of concern and prioritise problem sites and relatively good predictors of contaminations. However, these guidelines are chemical specific and do not include bio...

  15. Environmental assessment of polycyclic aromatic hydrocarbons (PAHs) in surface sediments of the Santander Bay, Northern Spain.

    Science.gov (United States)

    Viguri, J; Verde, J; Irabien, A

    2002-07-01

    Samples of intertidal surface sediments (0-2 cm) were collected in 17 stations of the Santander Bay, Cantabric Sea, Northern Spain. The concentrations of polycyclic aromatic hydrocarbons (PAHs), 16, were analysed by HPLC and MS detection. Surface sediments show a good linear correlation among the parameters of the experimental organic matter evaluation, where total carbon (TC) and loss on ignition (LOI) are approximately 2.5 and 5 times total organic carbon (TOC). A wide range of TOC from 0.08% to 4.1%, and a broad distribution of the sum of sigma16PAHs, from 0.02 to 344.6 microg/g d.w., which can be correlated by an exponential equation to the TOC, has been identified. A qualitative relationship may be established between the industrial input along the rivers and the concentration of sigma6PAHs in the sediments of the estuaries: Boo estuary (8404-4631 microg/g OC), Solia-San Salvador estuaries (305-113 microg/g OC) and Cubas estuary (31-32 microg/g OC). This work shows a dramatic change in the spatial distribution in the concentration of PAHs of intertidal surface sediments. The left edge of the Bay has the main traffic around the city and the major source of PAHs is from combustion processes and estuarine inputs, leading to medium values of PAHs in the sediments; the right edge of the Bay has much lesser anthropogenic activities leading to lower values of PAHs in sediments. The distribution of individual PAHs in sediments varies widely depending on their structure and molecular weight; the 4-6 ring aromatics predominate in polluted sediments due to their higher persistence. The isomer ratio does not allow any clear identification of the PAHs origin. Environmental evaluation according to Dutch guidelines and consensus sediment quality guidelines based on ecotoxicological data leads to the same conclusion, sediments in the Santander Bay show a very different environmental quality depending on the spatial position from heavily polluted/medium effects to non

  16. Acquiring Sediment and Element Compositional Changes Based on a Diffuse Reflectance Spectrophotometry Technology from Cores Offshore Southwestern Taiwan

    Science.gov (United States)

    Pan, H. J.; Chen, M. T.

    2014-12-01

    Heavy summer monsoon rainfall along with typhoon-induced extreme precipitation cause frequent geological hazards that often threaten the human's safety and property in Taiwan. These geological hazards can be triggered by both natural factors, and/or have become deteriorated by perturbations from more and more human activities ever since few thousand years ago. However, due to the limit of instrumental records for observing long-term environmental changes in Taiwan, few evidence exist for distinguishing the human-induced impacts from natural climate change. Here we report a study on a high quality marine sediment core (MD103264) which were retrieved from the high sedimentation rate area from offshore southwestern Taiwan and present evidence for the long-term climate and possibly human-induced environmental changes since the last glacial. We are using the VIS-NIR Diffuse Reflectance Spectrophotometry (DRS) methods to study the cores. Interpreting the VIS-NIR reflectance spectra through the VARIMAX-rotation, principle component analysis (VPCA) helps conducting rapid and inexpensive measurements for acquiring high-resolution biogenic component, clay, and iron oxide mineral compositional data from the cores. We are also using X-Ray Fluorescence (XRF) analysis, which is also useful in determining the element compositional changes in the core. Our studies aim toward understanding the sediment and element compositional changes that reflect the patterns of changes in precipitation and soil erosion on land since the last glacial to the Holocene, during which the human activities (deforestation, agriculture, and land uses change) may have increased drastically. We will report and interpret the preliminary results of the optical analyses of the core.

  17. Distribution, sources, and ecological risk assessment of SVOCs in surface sediments from Guan River Estuary, China.

    Science.gov (United States)

    He, Xinran; Song, Xiaojuan; Pang, Yong; Li, Yiping; Chen, Binlin; Feng, Zhihua

    2014-07-01

    The contamination of semi-volatile organic compounds (SVOCs) in the surface sediments of the Guan River Estuary, China was fully investigated. Total concentrations of 56 species of SVOCs ranged from 132 to 274 ng/g with an average of 186 ng/g (dry weight). Polycyclic aromatic hydrocarbon (PAH) concentrations were positively correlated with clay content and negatively correlated with sediment grain size. Source identification indicated that PAHs originated mainly from pyrolytic sources. However, intense ship traffic in the estuary may provide sources of petrogenic PAHs. Organochlorine pesticides (OCPs) mainly originated from direct input of dichlorodiphenyltrichloroethanes (DDTs) during some industrial processes. The SVOC concentrations were also compared with International Sediments Quality Guidelines and Sediments Quality Criteria, and the results indicated that negative biological impacts may originate from high concentrations of FLO, p,p'-DDE, and total DDTs.

  18. Removal of Surface-Reflected Light for the Measurement of Remote-Sensing Reflectance from an Above-Surface Platform

    Science.gov (United States)

    2010-12-06

    REPORT DATE IDD-MM- YYYY) 14-02-2011 2. REPORT TYPE Journal Article 3. DATES COVERED (From - To) 4. TITLE AND SUBTITLE Removal of Surface...impossible to obtain Rr, from measurements of vertical profiles of Lu and Elt [6]. During the experiment, the surface was calm [see Fig. 8(a)] and

  19. High-resolution multi-molecular stratigraphic records from North Atlantic drift sediments (ODP Sites 980, 984) reflecting Holocene climate and ocean dynamics

    Science.gov (United States)

    Holtvoeth, J.; Wagner, T.; Montlucon, D.; Mollenhauer, G.; McManus, J. F.; Oppo, D. W.; Eglinton, T. I.

    2005-12-01

    .g., long-chain diols) as well as lipids derived from terrigenous plant waxes serve as the primary molecular tools. Marine biomarker fluxes document past variations in climate-controlled marine productivity. Variations in the degree of saturation of alkenones (UK37') are used to reconstruct varying sea surface temperatures (SST). Vascular plant lipids, transported and deposited over the oceans as aerosols or via bottom currents, are interpreted in terms of eolian or advective terrigenous fluxes. Each of these processes is linked to specific climate conditions. We also compare 14C AMS ages of bulk OM and selected marine (alkenones) and terrigenous (plant waxes) biomarkers to those of planktonic foraminifera in order to examine current-driven sediment redistribution and advective transport. Preliminary 14C data indicate that bulk OM tends to be generally older than foraminiferal carbonate in both cores. As the age offsets appear to be coupled to sedimentation rate changes we investigate whether they reflect changes in current-driven redistribution of marine OM or supply of pre-aged terrigenous OM.

  20. Granulometric characterization of sediments transported by surface runoff generated by moving storms

    Directory of Open Access Journals (Sweden)

    J. L. M. P. de Lima

    2008-12-01

    Full Text Available Due to the combined effect of wind and rain, the importance of storm movement to surface flow has long been recognized, at scales ranging from headwater scales to large basins. This study presents the results of laboratory experiments designed to investigate the influence of moving rainfall storms on the dynamics of sediment transport by surface runoff. Experiments were carried out, using a rain simulator and a soil flume. The movement of rainfall was generated by moving the rain simulator at a constant speed in the upstream and downstream directions along the flume. The main objective of the study was to characterize, in laboratory conditions, the distribution of sediment grain-size transported by rainfall-induced overland flow and its temporal evolution. Grain-size distribution of the eroded material is governed by the capacity of flow that transports sediments. Granulometric curves were constructed using conventional hand sieving and a laser diffraction particle size analyser (material below 0.250 mm for overland flow and sediment deliveries collected at the flume outlet. Surface slope was set at 2%, 7% and 14%. Rainstorms were moved with a constant speed, upslope and downslope, along the flume or were kept static. The results of laboratory experiments show that storm movement, affecting the spatial and temporal distribution of rainfall, has a marked influence on the grain-size characteristics of sediments transported by overland flow. The downstream-moving rainfall storms have higher stream power than do other storm types.

  1. Sediment yield on a devastated hill in southern China: effects of microbiotic crust on surface erosion process

    Science.gov (United States)

    Uchida, Taro; Ohte, Nobuhito; Kimoto, Akitsu; Mizuyama, Takahisa; Changhua, Li

    2000-02-01

    In southern China, most of the forests consist of Pinus massoniana, but they are usually poor, thin, and deteriorated due to human intervention such as cutting, removal of litter for fuel and over-grazing. Therefore, exposed bare soil is found in many devastated hills. As a consequence, both the direct runoff percentage and the sediment yield are very high. In order to understand the surface erosion processes in this environment, we measured sediment yield and surface erosion depth in terms of catchment scale, and carried out in situ sprinkling experiments, focusing on the spatial variability of surface conditions and sediment sources. The results of sediment yield measurements at the end of headwater catchment suggest the following characteristic. (1) The surface water is capable of transporting more material than is supplied by detachment. That is, the sediment discharge process is detachment-limited. In situ sprinkling experiments indicate that: (2) In the lower part of the hillslope where the surface is covered by microbiotic crust, the ratio of surface runoff to rainfall is high, but sediment yield is small. (3) In the upper part of the hillslope where there is no microbiotic crust, the ratio of surface runoff to rainfall is low, but sediment yield is large. Measurements of surface erosion depths indicate that: (4) Microbiotic crusts provide a high degree of protection against soil erosion, even though the surface runoff ratio is large at the lower hillslope. Consequently, the surface erosion depth is almost zero at the lower part of hillslope. (5) The main source of sediment was the upper part of hillslope. Based on these indications, it can be concluded that when the sediment discharge process is detachment-limited, the effect of the surface crust and/or the vegetation cover on the sediment discharge process is great. That is, the spatial variation of the surface crust and/or the vegetation cover controls the source of sediment.

  2. Nitrogen cycling across the Peruvian oxygen minimum zone surface sediments

    Science.gov (United States)

    Sommer, S.; Bohlen, L.; Dale, A. W.; Wallmann, K.; Noffke, A.; Hensen, C.; Mosch, T.; Pfannkuche, O.

    2012-04-01

    Oxygen minimum zones (OMZ) are key regions for pelagic and benthic nitrogen turnover. During Meteor cruise M77 (Oct. - Dec. 2008) benthic nitrogen cycling along a latitudinal depth transect (85 to 1000 m) across the Peruvian OMZ at 11°S was studied involving in situ flux measurements, pore water geochemistry as well as diagenetic modeling. Along this transect bottom water oxygen levels were minor importance on the shelf and upper slope but was the dominant N sink at 1000 m. Mass balance calculations as well as modeling indicate that dissimilatory nitrate reduction to ammonium (DNRA) by sulfur bacteria and ammmonification were the main source pathways for ammonium to the bottom water, yielding release rates of up to 4.6 mmol m-2 d-1. DNRA retains DIN within the ecosystem and counteracts the removal of DIN via denitrification and/or anammox. This finding is in contrast to the current opinion that slope sediments in general represent major sinks for DIN.

  3. Preparation of surface conductive and highly reflective silvered polyimide films by surface modification and in situ self-metallization technique

    International Nuclear Information System (INIS)

    Wu Zhanpeng; Wu Dezhen; Qi Shengli; Zhang Teng; Jin Riguang

    2005-01-01

    Double surface conductive and reflective flexible silvered polyimide films have been prepared by alkali hydroxylation of polyimide film surface and incorporation of silver ions through subsequent ion exchange. Thermal curing of silver(I) polyamate precursor leads to re-cycloimidization of modified surface with concomitant silver reduction, yielding a reflective and conductive silver surface approaching that of native metal. The reflective and conductive surface evolves only when the cure temperature rises to 300 deg. C. The metallized films usually retain the essential mechanical properties of the parent films. Films were characterized by transmission electron microscopy (TEM), scanning electron microscopy and tapping mode atomic force microscopy (AFM). AFM demonstrates that the diameter of close-packed silver particles of the silver layers was about 50-150 nm. TEM shows that thickness of silver layer on the polyimide film surface is about 400-600 nm

  4. High quality broadband spatial reflections of slow Rayleigh surface acoustic waves modulated by a graded grooved surface

    KAUST Repository

    Xu, Yanlong

    2015-01-21

    We report high quality broadband spatial reflections of Rayleigh surface acoustic waves (SAWs) through a graded grooved surface. High quality means that no wave is allowed to transmit and the incident wave is nearly all reflected to the input side. The graded grooved surface is structured by drilling one dimensional array of graded grooves with increased depths on a flat surface. We investigate SAW dispersion relations, wave field distribution at several typical SAW wavelengths, and time evolution of a Gaussian pulse through the graded grooved surface. Results show that the input broadband Rayleigh SAWs can be slowed, spatially enhanced and stopped, and finally reflected to the input side. The study suggests that engraving the flat surface can be used as an efficient and economical way to manipulate Rayleigh SAWs, which has potential application in novel SAW devices such as filters, reflectors, sensors, energy harvesters, and diodes.

  5. Spectral reflectance of surface soils: Relationships with some soil properties

    Science.gov (United States)

    Kiesewetter, C. H.

    1983-01-01

    Using a published atlas of reflectance curves and physicochemical properties of soils, a statistical analysis was carried out. Reflectance bands which correspond to five of the wavebands used by NASA's Thematic Mapper were examined for relationships to specific soil properties. The properties considered in this study include: Sand Content, Silt Content, Clay Content, Organic Matter Content, Cation Exchange Capacity, Iron Oxide Content and Moisture Content. Regression of these seven properties on the mean values of five TM bands produced results that indicate that the predictability of the properties can be increased by stratifying the data. The data was stratified by parent material, taxonomic order, temperature zone, moisture zone and climate (combined temperature and moisture). The best results were obtained when the sample was examined by climatic classes. The middle Infra-red bands, 5 and 7, as well as the visible bands, 2 and 3, are significant in the model. The near Infra-red band, band 4, is almost as useful and should be included in any studies. General linear modeling procedures examined relationships of the seven properties with certain wavebands in the stratified samples.

  6. Estimating aerodynamic resistance of rough surfaces from angular reflectance

    Science.gov (United States)

    Current wind erosion and dust emission models neglect the heterogeneous nature of surface roughness and its geometric anisotropic effect on aerodynamic resistance, and over-estimate the erodible area by assuming it is not covered by roughness elements. We address these shortfalls with a new model wh...

  7. Accumulation and Risk of Triclosan in Surface Sediments Near the Outfalls of Municipal Wastewater Treatment Plants.

    Science.gov (United States)

    Chen, Lei; Wang, Zheng; Jing, Zhaoqian; Wang, Zhulai; Cao, Shiwei; Yu, Ting

    2015-10-01

    Triclosan is an antimicrobial agent which is widely used in many personal care products. This toxic chemical is frequently found in the aquatic environment. The municipal wastewater treatment plant (WWTP) effluent has been reported to be one of the major sources for triclosan in the aquatic system. The aim of the present study was to investigate the accumulation of triclosan in the surface sediments near the outfalls of the five major municipal WWTPs of Nanjing, China, as well as to evaluate its potential ecological risk. The concentration of triclosan in the sediment samples ranged from 48.3 to 226 ng/g dry weight, which was well correlated with the acute and genetic toxicity by bioassay. The results suggested that triclosan released from municipal WWTPs could accumulate in the surface sediments nearby and may pose undetermined risk to aquatic organisms.

  8. STACKING ON COMMON REFLECTION SURFACE WITH MULTIPARAMETER TRAVELTIME

    Directory of Open Access Journals (Sweden)

    Montes V. Luis A.

    2006-12-01

    Full Text Available Commonly seismic images are displayed in time domain because the model in depth can be known only in well logs. To produce seismic sections, pre and post stack processing approaches use time or depth velocity models whereas the common reflection method does not, instead it requires a set of parameters established for the first layer. A set of synthetic data of an anticline model, with sources and receivers placed on a flat topography, was used to observe the performance of this method. As result, a better reflector recovering compared against conventional processing sequence was observed.
    The procedure was extended to real data, using a dataset acquired on a zone characterized by mild topography and quiet environment reflectors in the Eastern Colombia planes, observing an enhanced and a better continuity of the reflectors in the CRS stacked section.

  9. APPLICATION OF SEDIMENT QUALITY GUIDELINES IN THE ASSESSMENT OF MANGROVE SURFACE SEDIMENT IN MENGKABONG LAGOON, SABAH, MALAYSIA

    Directory of Open Access Journals (Sweden)

    S. M. Praveena, M. Radojevic, M. H. Abdullah, A. Z. Aris

    2008-01-01

    Full Text Available There have been numerous sediment quality guidelines developed to monitor the sediments. Sediment quality guidelines are very useful to screen sediment contamination by comparing sediment contaminant concentration with the corresponding quality guideline, provide useful tools for screening sediment chemical data to identify pollutants of concern and prioritise problem sites and relatively good predictors of contaminations. However, these guidelines are chemical specific and do not include biological parameters. Aquatic ecosystems, including sediments, must be assessed in multiple components (biological data, toxicity, physicochemistry by using intregrated approaches in order to establish a complete and comprehensive set of sediment quality guidelines. Numerous sediment quality guidelines Washington Department of Ecology Sediment Quality Guideline, Australian and New Zealand Environment and Conservation Council, Swedish Environmental Sediment Quality, Screening Quick Reference Table, Portuguese Legislation on the Classification of Dredged Materials in Coastal Zones and Interim Sediment Quality Guideline for Hong Kong have been applied to the Mengkabong lagoon mangrove sediment and discussed. The most appropriate guideline that meets the prioritization criteria consistent with international initiatives and regulations is interim sediment quality values for Hong Kong. The guideline verifies that all the metals are below the Interim Sediment Quality Value-low. However, site-specific, biological testing and ecological analysis of exisiting benthics community structure related to sediment contamination are needed for final decision making in the case of Mengkabong lagoon.

  10. Sedimentation

    Digital Repository Service at National Institute of Oceanography (India)

    Rixen, T.; Guptha, M.V.S.; Ittekkot, V.

    through the water column but their trapping efficiency, and thus, their accuracy can be biased by hydrodynamic and biological effects (Lee et al., 1988; Gust et al., 1992; 1994). Scholten et al. (2001) showed that the 230 Thorium trapping efficiency... of sediment traps moored at different sites and water depths in eastern North Atlantic Ocean varies between 9 and 143%. In general, these trapping efficiencies increase with increasing water-depth (Scholten et al., 2001). By comparing data from various ocean...

  11. Surface Bubbles in the Bathtub and Reflections on Ripple Tanks

    Science.gov (United States)

    Greenslade, Thomas B.

    2012-01-01

    Bathtubs are splendid places for studying physics! Recently I was happily splashing about and noticed that the light from the lamp above me was being focused as bright spots on the bottom of the tub. Closer inspection showed that the spots were surrounded by dark rings. This pattern turned out to be due to the lensing effect of bubbles floating on the surface of the water.

  12. Unmanned aerial system nadir reflectance and MODIS nadir BRDF-adjusted surface reflectances intercompared over Greenland

    Directory of Open Access Journals (Sweden)

    J. F. Burkhart

    2017-07-01

    Full Text Available Albedo is a fundamental parameter in earth sciences, and many analyses utilize the Moderate Resolution Imaging Spectroradiometer (MODIS bidirectional reflectance distribution function (BRDF/albedo (MCD43 algorithms. While derivative albedo products have been evaluated over Greenland, we present a novel, direct comparison with nadir surface reflectance collected from an unmanned aerial system (UAS. The UAS was flown from Summit, Greenland, on 210 km transects coincident with the MODIS sensor overpass on board the Aqua and Terra satellites on 5 and 6 August 2010. Clear-sky acquisitions were available from the overpasses within 2 h of the UAS flights. The UAS was equipped with upward- and downward-looking spectrometers (300–920 nm with a spectral resolution of 10 nm, allowing for direct integration into the MODIS bands 1, 3, and 4. The data provide a unique opportunity to directly compare UAS nadir reflectance with the MODIS nadir BRDF-adjusted surface reflectance (NBAR products. The data show UAS measurements are slightly higher than the MODIS NBARs for all bands but agree within their stated uncertainties. Differences in variability are observed as expected due to different footprints of the platforms. The UAS data demonstrate potentially large sub-pixel variability of MODIS reflectance products and the potential to explore this variability using the UAS as a platform. It is also found that, even at the low elevations flown typically by a UAS, reflectance measurements may be influenced by haze if present at and/or below the flight altitude of the UAS. This impact could explain some differences between data from the two platforms and should be considered in any use of airborne platforms.

  13. Color reflectance spectroscopy of profundal lake sediments: a novel moisture-balance proxy for tropical East Africa

    Science.gov (United States)

    Meyer, Inka; Van Daele, Maarten; Fiers, Geraldine; Verleyen, Eli; De Batist, Marc; Verschuren, Dirk

    2016-04-01

    Investigations of the continuous sediment record from Lake Challa, a deep freshwater crater lake on the eastern slope of Mt. Kilimanjaro, are expanding our knowledge about past climate and environmental changes in equatorial East Africa. During a field campaign in 2005 a 20.65-m long composite sediment sequence was retrieved from the center of the lake, covering the past 25,000 years. Unlike many other East African lakes, Lake Challa never dried out during this period and therefore provides one of the few continuous and high-resolution regional climate-proxy records since before the LGM. Continuously taken digital line-scan images (GeoTek MSCL core logger) revealed systematic colour variation from greenish to yellow-brownish sediments throughout the core sequence. To characterize the origin of these colour variations, high-resolution colour reflectance spectrometry was carried out. The relative absorption band depth (RABD) at different wavelengths was calculated to distinguish between sediment components with distinct absorption/ reflection characteristics. RABD660/670 can be used as a proxy for chlorophyll and its derivates, and RABD610 as a proxy for carotenoids and their derivates. Comparison of RABD660/670 with independent reconstructions of rainfall (the Branched and Isoprenoid Tetraether (BIT) index of bacterial lipids) and seismic lake level reconstructions showed a positive correlation between these proxies. During times of wetter climate and higher lake level, e.g. the early Holocene, the RABD660/670 value is higher than during times of inferred dry conditions and low lake level, e.g. the early late-Glacial period (during which no chlorophyll or its derivates were detected). We attribute this positive correlation to reduced preservation of chlorophyll contained in the settling remains of dead phytoplankton during lowstands, when bottom waters may have been better oxygenated. This data is supported by the variation in fossil pigment concentration and

  14. Micro contaminants in surface sediments and macrobenthic invertebrates of the North Sea

    NARCIS (Netherlands)

    Everaarts, J.M.; Fischer, C.V.

    1989-01-01

    Trace metal concentrations (copper, zinc, cadmium and lead) were measured in the silt fraction (grainsize < 63 µm) of surface sediment of the North Sea. The concentrations varied in different areas of the Dutch continental shelf of the North Sea. The trace metal concentrations were highly related

  15. Distribution and sources of n-alkanes in surface sediments of Taihu Lake, China

    Directory of Open Access Journals (Sweden)

    Yu Yunlong

    2016-03-01

    Full Text Available The last study on n-alkanes in surface sediments of Taihu Lake was in 2000, only 13 surface sediment samples were analysed, in order to have a comprehensive and up-to-date understanding of n-alkanes in the surface sediments of Taihu Lake, 41 surface sediment samples were analyzed by GC-MS. C10 to C37 were detected, the total concentrations of n-alkanes ranged from 2109 ng g−1 to 9096 ng g−1 (dry weight. There was strong odd carbon predominance in long chain n-alkanes and even carbon predominance in short chain n-alkanes. When this finding was combined with the analysis results of wax n-alkanes (WaxCn, carbon preference index (CPI, unresolved complex mixture (UCM, hopanes and steranes, it was considered that the long chain n-alkanes were mainly from terrigenous higher plants, and that the short chain n-alkanes mainly originated from bacteria and algae in the lake, compared with previous studies, there were no obvious anthropogenic petrogenic inputs. Terrestrial and aquatic hydrocarbons ratio (TAR and C21−/C25+ indicated that terrigenous input was higher than aquatic sources and the nearshore n-alkanes were mainly from land-derived sources. Moreover, the distribution of short chain n-alkanes presented a relatively uniform pattern, while the long chain n-alkanes presented a trend that concentrations dropped from nearshore places to the middle of lake.

  16. The impact of oxic degradation on long chain alkyl diol distributions in Arabian Sea surface sediments

    NARCIS (Netherlands)

    Rodrigo-Gámiz, M.; Rampen, S.W.; Schouten, S.; Sinninghe Damsté, J.S.

    2016-01-01

    Oxygen exposure has a large impact on lipid biomarker preservation in surface sediments and may affectthe application of organic proxies used for reconstructing past environmental conditions. To determineits effect on long chain alkyl diol and keto-ol based proxies, the distributions of these lipids

  17. The impact of oxic degradation on long chain alkyl diol distributions in Arabian Sea surface sediments

    NARCIS (Netherlands)

    Rodrigo-Gámiz, M.; Rampen, Sebastiaan W.; Schouten, S.; Sinninghe Damsté, J.S.

    2016-01-01

    Oxygen exposure has a large impact on lipid biomarker preservation in surface sediments and may affect the application of organic proxies used for reconstructing past environmental conditions. To determine its effect on long chain alkyl diol and keto-ol based proxies, the distributions of these

  18. A non-reflecting boundary condition for the finite element modeling of infinite reservoir with layered sediment

    Science.gov (United States)

    Gogoi, Indrani; Maity, Damodar

    2006-10-01

    The design of seismic resistant concrete gravity dam necessitates accurate determination of hydrodynamic pressure developed in the adjacent reservoir. The hydrodynamic pressure developed on structure is dependent on the physical characteristics of the boundaries surrounding the reservoir including reservoir bottom. The sedimentary material in the reservoir bottom absorbs energy at the bottom, which will affect the hydrodynamic pressure at the upstream face of the dam. The fundamental parameter characterizing the effect of absorption of hydrodynamic pressure waves at the reservoir bottom due to sediment is the reflection coefficient. The wave reflection coefficient is determined from parameters based on sediment layer thickness, its material properties and excitation frequencies. An analytical or a closed-form solution cannot account for the arbitrary geometry of the dam or reservoir bed profile. This problem can be efficiently tackled with finite element technique. The need for an accurate truncation boundary is felt to reduce the computational domain of the unbounded reservoir system. An efficient truncation boundary condition (TBC) which accounts for the reservoir bottom effect is proposed for the finite element analysis of infinite reservoir. The results show the efficiency of the proposed truncation boundary condition.

  19. On the bioavailability of trace metals in surface sediments: a combined geochemical and biological approach.

    Science.gov (United States)

    Roosa, Stéphanie; Prygiel, Emilie; Lesven, Ludovic; Wattiez, Ruddy; Gillan, David; Ferrari, Benoît J D; Criquet, Justine; Billon, Gabriel

    2016-06-01

    The bioavailability of metals was estimated in three river sediments (Sensée, Scarpe, and Deûle Rivers) impacted by different levels of Cu, Cd, Pb, and Zn (Northern France). For that, a combination of geochemistry and biological responses (bacteria and chironomids) was used. The results obtained illustrate the complexity of the notion of "bioavailability." Indeed, geochemical indexes suggested a low toxicity, even in surface sediments with high concentrations of total metals and a predicted severe effect levels for the organisms. This was also suggested by the abundance of total bacteria as determined by DAPI counts, with high bacterial cell numbers even in contaminated areas. However, a fraction of metals may be bioavailable as it was shown for chironomid larvae which were able to accumulate an important quantity of metals in surface sediments within just a few days.We concluded that (1) the best approach to estimate bioavailability in the selected sediments is a combination of geochemical and biological approaches and that (2) the sediments in the Deûle and Scarpe Rivers are highly contaminated and may impact bacterial populations but also benthic invertebrates.

  20. Methane Bubbles Transport Particles From Contaminated Sediment to a Lake Surface

    Science.gov (United States)

    Delwiche, K.; Hemond, H.

    2017-12-01

    Methane bubbling from aquatic sediments has long been known to transport carbon to the atmosphere, but new evidence presented here suggests that methane bubbles also transport particulate matter to a lake surface. This transport pathway is of particular importance in lakes with contaminated sediments, as bubble transport could increase human exposure to toxic metals. The Upper Mystic Lake in Arlington, MA has a documented history of methane bubbling and sediment contamination by arsenic and other heavy metals, and we have conducted laboratory and field studies demonstrating that methane bubbles are capable of transporting sediment particles over depths as great as 15 m in Upper Mystic Lake. Methane bubble traps were used in-situ to capture particles adhered to bubble interfaces, and to relate particle mass transport to bubble flux. Laboratory studies were conducted in a custom-made 15 m tall water column to quantify the relationship between water column height and the mass of particulate transport. We then couple this particle transport data with historical estimates of ebullition from Upper Mystic Lake to quantify the significance of bubble-mediated particle transport to heavy metal cycling within the lake. Results suggest that methane bubbles can represent a significant pathway for contaminated sediment to reach surface waters even in relatively deep water bodies. Given the frequent co-occurrence of contaminated sediments and high bubble flux rates, and the potential for human exposure to heavy metals, it will be critical to study the significance of this transport pathway for a range of sediment and contaminant types.

  1. Coccolith distribution patterns in South Atlantic and Southern Ocean surface sediments in relation to environmental gradients

    DEFF Research Database (Denmark)

    Boeckel, B.; Baumann, K.-H.; Henrich, R.

    2006-01-01

    In this study, the coccolith compositions of 213 surface sediment samples from the South Atlantic and Southern Ocean were analysed with respect to the environmental parameters of the overlying surface waters. From this data set, the abundance patterns of the main species and their ecological...... seems to be associated with high temperatures and salinities under low-nutrient conditions. Based on the relative abundances of Calcidiscus leptoporus, F. profunda, Gladiolithus flabellatus, Helicosphaera spp., Umbilicosphaera foliosa, Umbilicosphaera sibogae and a group of subordinate subtropical...

  2. Thallium dispersal and contamination in surface sediments from South China and its source identification.

    Science.gov (United States)

    Liu, Juan; Wang, Jin; Chen, Yongheng; Shen, Chuan-Chou; Jiang, Xiuyang; Xie, Xiaofan; Chen, Diyun; Lippold, Holger; Wang, Chunlin

    2016-06-01

    Thallium (Tl) is a non-essential element in humans and it is considered to be highly toxic. In this study, the contents, sources, and dispersal of Tl were investigated in surface sediments from a riverine system (the western Pearl River Basin, China), whose catchment has been contaminated by mining and roasting of Tl-bearing pyrite ores. The isotopic composition of Pb and total contents of Tl and other relevant metals (Pb, Zn, Cd, Co, and Ni) were measured in the pyrite ores, mining and roasting wastes, and the river sediments. Widespread contamination of Tl was observed in the sediments across the river, with the highest concentration of Tl (17.3 mg/kg) measured 4 km downstream from the pyrite industrial site. Application of a modified Institute for Reference Materials and Measurement (IRMM) sequential extraction scheme in representative sediments unveiled that 60-90% of Tl and Pb were present in the residual fraction of the sediments. The sediments contained generally lower (206)Pb/(207)Pb and higher (208)Pb/(206)Pb ratios compared with the natural Pb isotope signature (1.2008 and 2.0766 for (206)Pb/(207)Pb and (208)Pb/(206)Pb, respectively). These results suggested that a significant fraction of non-indigenous Pb could be attributed to the mining and roasting activities of pyrite ores, with low (206)Pb/(207)Pb (1.1539) and high (208)Pb/(206)Pb (2.1263). Results also showed that approximately 6-88% of Tl contamination in the sediments originated from the pyrite mining and roasting activities. This study highlights that Pb isotopic compositions could be used for quantitatively fingerprinting the sources of Tl contamination in sediments. Copyright © 2016 Elsevier Ltd. All rights reserved.

  3. Predicting uncertainty in sediment transport and landscape evolution - the influence of initial surface conditions

    Science.gov (United States)

    Hancock, G. R.; Coulthard, T. J.; Lowry, J. B. C.

    2016-05-01

    Numerical landscape evolution models were initially developed to examine natural catchment hydrology and geomorphology and have become a common tool to examine geomorphic behaviour over a range of time and space scales. These models all use a digital elevation model (DEM) as a representation of the landscape surface and a significant issue is the quality and resolution of this surface. Here we focus on how subtle perturbations or roughness on the DEM surface can produce alternative model results. This study is carried out by randomly varying the elevations of the DEM surface and examining the effect on sediment transport rates and geomorphology for a proposed rehabilitation design for a post-mining landscape using multiple landscape realisations with increasing magnitudes of random changes. We show that an increasing magnitude of random surface variability does not appear to have any significant effect on sediment transport over millennial time scales. However, the random surface variability greatly changes the temporal pattern or delivery of sediment output. A significant finding is that all simulations at the end of the 10,000 year modelled period are geomorphologically similar and present a geomorphological equifinality. However, the individual patterns of erosion and deposition were different for repeat simulations with a different sequence of random perturbations. The alternative positions of random perturbations strongly influence local patterns of hillslope erosion and evolution together with the pattern and behaviour of deposition. The findings demonstrate the complex feedbacks that occur even within a simple modelled system.

  4. Occurrence of polycyclic aromatic hydrocarbons in surface sediments of a highly urbanized river system with special reference to energy consumption patterns

    International Nuclear Information System (INIS)

    Zhang Kai; Wang Jizhong; Liang Bo; Zeng, Eddy Y.

    2011-01-01

    Sediment samples collected from downstream of the Dongjiang River, a highly urbanized river network within the Pearl River Delta of South China, were analyzed for 28 polycyclic aromatic hydrocarbons (PAHs). Total concentrations of 28 PAHs, 16 priority PAHs designated by the United States Environmental Protection Agency (USEPA) and the seven carcinogenic PAHs classified by the USEPA ranged from 480 to 4600, 100 to 3400 and 10 to 1700 ng/g dry weight, respectively. Principal component analysis-based stepwise multivariate linear regression showed that sediment PAHs were predominantly derived from coal combustion, refined fossil fuel combustion and oil spills, accounting for 37%, 32% and 23%, respectively, of the total loading. The levels of sediment PAHs remained steady from 2002 to 2008, during which fossil fuel consumption had doubled, probably reflecting efforts to control PAH emissions from fossil fuel combustion. Finally, use of natural gas and liquefied petroleum gas in automobiles should be encouraged to improve environmental quality. - Highlights: → PAHs in sediment showed similar input sources as those in air particles. → Combustion of fossil fuel is the predominant source for sediment PAHs. → Local efforts to control PAHs emissions from fossil fuel combustion were effective. → Promotion of natural gas and liquefied petroleum gas can reduce emissions of PAHs. - Occurrence of PAHs in surface sediments from a highly urbanized river system is assessed in relation to energy consumption patterns.

  5. LBA-ECO CD-34 Hyperion 30-m Surface Reflectance, Amazon Basin: 2002-2005

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set contains 20 multispectral surface reflectance images collected by the EO-1 satellite Hyperion sensor at 30-m resolution and covering the entire Amazon...

  6. MODIS/Terra Surface Reflectance Daily L2G Global 250m SIN Grid V006

    Data.gov (United States)

    National Aeronautics and Space Administration — The MOD09GQ Version 6 product provides an estimate of the surface spectral reflectance of Terra MODIS 250 m bands 1-2 corrected for atmospheric conditions such as...

  7. LiDAR Relative Reflectivity Surface (2011) for the St. Thomas East End Reserve, St. Thomas

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This image represents a LiDAR (Light Detection & Ranging) 0.3x0.3 meter resolution relative seafloor reflectivity surface for the St. Thomas East End Reserve...

  8. CLPX-Satellite: EO-1 Hyperion Surface Reflectance, Snow-Covered Area, and Grain Size

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set consists of apparent surface reflectance, subpixel snow-covered area and grain size collected from the Hyperion hyperspectral imager. The Hyperion...

  9. NOAA Climate Data Record (CDR) of AVHRR Surface Reflectance, Version 4

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset contains gridded daily surface reflectance and brightness temperatures derived from the Advanced Very High Resolution Radiometer (AVHRR) sensors onboard...

  10. ASTER L2 Surface Reflectance VNIR and Crosstalk Corrected SWIR V003

    Data.gov (United States)

    National Aeronautics and Space Administration — The ASTER L2 Surface Reflectance is a multi-file product that contains atmospherically corrected data for both the Visible Near-Infrared (VNIR) and Shortwave...

  11. MODIS/Aqua Surface Reflectance 8-Day L3 Global 250m SIN Grid V006

    Data.gov (United States)

    National Aeronautics and Space Administration — The MYD09Q1 Version 6 product provides an estimate of the surface spectral reflectance of AQUA MODIS Bands 1-2 corrected for atmospheric conditions such as gasses,...

  12. MODIS/Aqua Surface Reflectance Daily L3 Global 0.05Deg CMG V006

    Data.gov (United States)

    National Aeronautics and Space Administration — The MYD09CMG Version 6 product provides an estimate of the surface spectral reflectance of AQUA MODIS Bands 1-7 resampled to 5600 m pixel resolution and corrected...

  13. VIIRS/NPP Surface Reflectance Daily L3 Global 0.05 Deg CMG V001

    Data.gov (United States)

    National Aeronautics and Space Administration — The Visible Infrared Imaging Radiometer Suite (VIIRS) daily surface reflectance Climate Modeling Grid (VNP09CMG) Version 1 product provides an estimate of land...

  14. MODIS/Aqua Surface Reflectance 8-Day L3 Global 500m SIN Grid V006

    Data.gov (United States)

    National Aeronautics and Space Administration — The MYD09A1 Version 6 product provides an estimate of the surface spectral reflectance of AQUA MODIS Bands 1-7 corrected for atmospheric conditions such as gasses,...

  15. LBA-ECO LC-18 Hyperion 30-m Surface Reflectance, Mato Grosso, Brazil: July 2004

    Data.gov (United States)

    National Aeronautics and Space Administration — ABSTRACT: This image was collected by the Hyperion sensor on 10-July-2004 at 13:16:16 GMT. It was calibrated to apparent surface reflectance using the ACORN...

  16. LBA-ECO LC-18 Hyperion 30-m Surface Reflectance, Mato Grosso, Brazil: July 2004

    Data.gov (United States)

    National Aeronautics and Space Administration — This image was collected by the Hyperion sensor on 10-July-2004 at 13:16:16 GMT. It was calibrated to apparent surface reflectance using the ACORN atmospheric...

  17. Additive surface complexation modeling of uranium(VI) adsorption onto quartz-sand dominated sediments.

    Science.gov (United States)

    Dong, Wenming; Wan, Jiamin

    2014-06-17

    Many aquifers contaminated by U(VI)-containing acidic plumes are composed predominantly of quartz-sand sediments. The F-Area of the Savannah River Site (SRS) in South Carolina (USA) is an example. To predict U(VI) mobility and natural attenuation, we conducted U(VI) adsorption experiments using the F-Area plume sediments and reference quartz, goethite, and kaolinite. The sediments are composed of ∼96% quartz-sand and 3-4% fine fractions of kaolinite and goethite. We developed a new humic acid adsorption method for determining the relative surface area abundances of goethite and kaolinite in the fine fractions. This method is expected to be applicable to many other binary mineral pairs, and allows successful application of the component additivity (CA) approach based surface complexation modeling (SCM) at the SRS F-Area and other similar aquifers. Our experimental results indicate that quartz has stronger U(VI) adsorption ability per unit surface area than goethite and kaolinite at pH ≤ 4.0. Our modeling results indicate that the binary (goethite/kaolinite) CA-SCM under-predicts U(VI) adsorption to the quartz-sand dominated sediments at pH ≤ 4.0. The new ternary (quartz/goethite/kaolinite) CA-SCM provides excellent predictions. The contributions of quartz-sand, kaolinite, and goethite to U(VI) adsorption and the potential influences of dissolved Al, Si, and Fe are also discussed.

  18. Simulation and Measurement of Angle Resolved Reflectance from Black Si Surfaces

    DEFF Research Database (Denmark)

    Davidsen, Rasmus Schmidt; Wu, Kaiyu; Schmidt, Michael Stenbæk

    2015-01-01

    In this work angle-resolved reflectance from nanostructured Si surfaces realized by maskless RIE texturing has been simulated and measured. The simulation and experimental measurement data show the same trend. Experimentally a total reflectance below 1% for incident angles below 30o and specular...

  19. Backscattered EM-wave manipulation using low cost 1-bit reflective surface at W-band

    Science.gov (United States)

    Taher Al-Nuaimi, Mustafa K.; Hong, Wei; He, Yejun

    2018-04-01

    The design of low cost 1-bit reflective (non-absorptive) surfaces for manipulation of backscattered EM-waves and radar cross section (RCS) reduction at W-band is presented in this article. The presented surface is designed based on the reflection phase cancellation principle. The unit cell used to compose the proposed surface has an obelus (division symbol of short wire and two disks above and below) like shape printed on a grounded dielectric material. Using this unit cell, surfaces that can efficiently manipulate the backscattered RCS pattern by using the proposed obelus-shaped unit cell (as ‘0’ element) and its mirrored unit cell (as ‘1’ element) in one surface with a 180°  ±  35° reflection phase difference between their reflection phases are designed. The proposed surfaces can generate various kinds of backscattered RCS patterns, such as single, three, or four lobes or even a low-level (reduced RCS) diffused reflection pattern when those two unit cells are distributed randomly across the surface aperture. For experimental characterization purposes, a 50  ×  50 mm2 surface is fabricated and measured.

  20. Coordinated Analyses of Antarctic Sediments as Mars Analog Materials Using Reflectance Spectroscopy and Current Flight-Like Instruments for CheMin, SAM and MOMA

    Science.gov (United States)

    Bishop, Janice L.; Franz, Heather B.; Goetz, Walter; Blake, David F.; Freissinet, Caroline; Steininger, Harald; Goesmann, Fred; Brinckerhoff, William B.; Getty, Stephanie; Pinnick, Veronica T.; hide

    2013-01-01

    Coordinated analyses of mineralogy and chemistry of sediments from the Antarctic Dry Valleys illustrate how data obtained using flight-ready technology of current NASA and ESA missions can be combined for greater understanding of the samples. Mineralogy was measured by X-ray diffraction (XRD) and visible/ near-infrared (VNIR) reflectance spectroscopy. Chemical analyses utilized a quadrupole mass spectrometer (QMS) to perform pyrolysis-evolved gas analysis (EGA) and gas chromatography-mass spectrometry (GC/MS) both with and without derivatization, as well as laser desorption-mass spectrometry (LD/MS) techniques. These analyses are designed to demonstrate some of the capabilities of near-term landed Mars missions, to provide ground truthing of VNIR reflectance data acquired from orbit by the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) on MRO and to provide detection limits for surface- operated instruments: the Chemistry and Mineralogy (CheMin) and Sample Analysis at Mars (SAM) instrument suites onboard Mars Science Laboratory (MSL) and the Mars Organic Molecule Analyzer (MOMA) onboard ExoMars-2018. The new data from this study are compared with previous analyses of the sediments performed with other techniques. Tremolite was found in the oxic region samples for the first time using the CheMin-like XRD instrument. The NIR spectral features of tremolite are consistent with those observed in these samples. Although the tremolite bands are weak in spectra of these samples, spectral features near 2.32 and 2.39 micrometers could be detected by CRISM if tremolite is present on the martian surface. Allophane was found to be a good match to weak NIR features at 1.37-1.41, 1.92, and 2.19 micrometers in spectra of the oxic region sediments and is a common component of immature volcanic soils. Biogenic methane was found to be associated with calcite in the oxic region samples by the SAM/EGA instrument and a phosphoric acid derivative was found in the anoxic

  1. Hydrothermal alteration of sediments associated with surface emissions from the Cerro Prieto geothermal field

    Energy Technology Data Exchange (ETDEWEB)

    Valette-Silver, J.N.; Esquer P., I.; Elders, W.A.; Collier, P.C.; Hoagland, J.R.

    1981-01-01

    A study of the mineralogical changes associated with these hydrothermal vents was initiated with the aim of developing possible exploration tools for geothermal resources. The Cerro Prieto reservoir has already been explored by extensive deep drilling so that relationships between surface manifestations and deeper hydrothermal processes could be established directly. Approximately 120 samples of surface sediments were collected both inside and outside of the vents. The mineralogy of the altered sediments studied appears to be controlled by the type of emission. A comparison between the changes in mineralogy due to low temperature hydrothermal activity in the reservoir, seen in samples from boreholes, and mineralogical changes in the surface emission samples shows similar general trends below 180 C: increase of quartz, feldspar and illite, with subsequent disappearance of kaolinite, montmorillonite, calcite and dolomite. These mineral assemblages seem to be characteristic products of the discharge from high intensity geothermal fields.

  2. Improving understanding of the underlying physical process of sediment wash-off from urban road surfaces

    Science.gov (United States)

    Muthusamy, Manoranjan; Tait, Simon; Schellart, Alma; Beg, Md Nazmul Azim; Carvalho, Rita F.; de Lima, João L. M. P.

    2018-02-01

    Among the urban aquatic pollutants, the most common is sediment which also acts as a transport medium for many contaminants. Hence there is an increasing interest in being able to better predict the sediment wash-off from urban surfaces. The exponential wash-off model is the most widely used method to predict the sediment wash-off. Although a number of studies proposed various modifications to the original exponential wash-off equation, these studies mostly looked into one parameter in isolation thereby ignoring the interactions between the parameters corresponding to rainfall, catchment and sediment characteristics. Hence in this study we aim (a) to investigate the effect of rainfall intensity, surface slope and initial load on wash-off load in an integrated and systematic way and (b) to subsequently improve the exponential wash-off equation focusing on the effect of the aforementioned three parameters. A series of laboratory experiments were carried out in a full-scale setup, comprising of a rainfall simulator, a 1 m2 bituminous road surface, and a continuous wash-off measuring system. Five rainfall intensities ranging from 33 to 155 mm/h, four slopes ranging from 2 to 16% and three initial loads ranging from 50 to 200 g/m2 were selected based on values obtained from the literature. Fine sediment with a size range of 300-600 μm was used for all of the tests. Each test was carried out for one hour with at least 9 wash-off samples per test collected. Mass balance checks were carried out for all the tests as a quality control measure to make sure that there is no significant loss of sand during the tests. Results show that the washed off sediment load at any given time is proportional to initial load for a given combination of rainfall intensity and surface slope. This indicates the importance of dedicated modelling of build-up so as to subsequently predict wash-off load. It was also observed that the maximum fraction that is washed off from the surface increases

  3. Heavy metal concentration in mangrove surface sediments from the north-west coast of South America.

    Science.gov (United States)

    Fernández-Cadena, J C; Andrade, S; Silva-Coello, C L; De la Iglesia, R

    2014-05-15

    Mangrove ecosystems are coastal estuarine systems confined to the tropical and subtropical regions. The Estero Salado mangrove located in Guayaquil, Ecuador, has suffered constant disturbances during the past 20 years, due to industrial wastewater release. However, there are no published data for heavy metals present in its sediments and the relationship with anthropogenic disturbance. In the present study, metal concentrations were evaluated in surface sediment samples of the mangrove, showing that B, Cd, Cu, Pb, Se, V, and Zn levels exceeded those declared in international environmental quality standards. Moreover, several metals (Pb, Sn, Cd, Ag, Mo, Zn and Ni) could be linked to the industrial wastewater present in the studied area. In addition, heavy metal levels detected in this mangrove are higher than previous reports on mangrove sediments worldwide, indicating that this mangrove ecosystem is one of the most disrupted on earth. Copyright © 2014 Elsevier Ltd. All rights reserved.

  4. Distribution of /sup 137/Cs in surface intertidal sediments from the Solway Firth

    Energy Technology Data Exchange (ETDEWEB)

    Jones, D.G.; Miller, J.M.; Roberts, P.D. (Institute of Geological Sciences, Keyworth (UK))

    1984-05-01

    The distribution of /sup 137/Cs from the Sellafield (Windscale) nuclear fuel reprocessing plant has been examined in detail in the surface intertidal sediments of the inner Solway Firth by means of a hovercraft-borne radiometric survey. With the exception of a belt of relatively active sands to the south of Silloth, caesium distribution is generally consistent with that of fine-grained sediment such that the highest concentrations occur in mud flat and salt marsh sediments which are most extensive in sheltered coastal embayments. /sup 137/Cs activities in July 1980 were typically 2 to 30 pCi g/sup -1/ but locally exceeded 50 pCi g/sup -1/. These levels are considerably lower than those recorded in locations, such as the outer Solway and Ravenglass estuary, which are closer to the Sellafield outfall.

  5. Retrieval and Validation of aerosol optical properties from AHI measurements: impact of surface reflectance assumption

    Science.gov (United States)

    Lim, H.; Choi, M.; Kim, J.; Go, S.; Chan, P.; Kasai, Y.

    2017-12-01

    This study attempts to retrieve the aerosol optical properties (AOPs) based on the spectral matching method, with using three visible and one near infrared channels (470, 510, 640, 860nm). This method requires the preparation of look-up table (LUT) approach based on the radiative transfer modeling. Cloud detection is one of the most important processes for guaranteed quality of AOPs. Since the AHI has several infrared channels, which are very advantageous for cloud detection, clouds can be removed by using brightness temperature difference (BTD) and spatial variability test. The Yonsei Aerosol Retrieval (YAER) algorithm is basically utilized on a dark surface, therefore a bright surface (e.g., desert, snow) should be removed first. Then we consider the characteristics of the reflectance of land and ocean surface using three visible channels. The known surface reflectivity problem in high latitude area can be solved in this algorithm by selecting appropriate channels through improving tests. On the other hand, we retrieved the AOPs by obtaining the visible surface reflectance using NIR to normalized difference vegetation index short wave infrared (NDVIswir) relationship. ESR tends to underestimate urban and cropland area, we improved the visible surface reflectance considering urban effect. In this version, ocean surface reflectance is using the new cox and munk method which considers ocean bidirectional reflectance distribution function (BRDF). Input of this method has wind speed, chlorophyll, salinity and so on. Based on validation results with the sun-photometer measurement in AErosol Robotic NETwork (AERONET), we confirm that the quality of Aerosol Optical Depth (AOD) from the YAER algorithm is comparable to the product from the Japan Aerospace Exploration Agency (JAXA) retrieval algorithm. Our future update includes a consideration of improvement land surface reflectance by hybrid approach, and non-spherical aerosols. This will improve the quality of YAER

  6. Automated Measurement for Sensitivity Analysis of Runoff-Sediment Load at Varying Surface Gradients

    Directory of Open Access Journals (Sweden)

    Imanogor P.A.

    2015-07-01

    Full Text Available Direct measurement of surface runoff is often associated with errors and inaccuracies which results to unreliable hydrological data. An automatic Runoff-meter using tipping buckets arrangement calibrated to tip 0.14 liter of runoff water per tip with an accuracy of ± 0.001 litre was used to measure surface runoff from a steel bounded soil tray of dimension (1200 mm X 900 mm X 260 mm filled with sand loamy to the depth of 130 mm and inclined at angle (0 0 , 5 0 ,12 0 and 15 0 horizontal to the instrument. The effect of varying angles of inclination on runoff intensity, sediment loss rate and sediment loss is significant at 5 % confidence level, while surface runoff is not significant at 5 % confidence level. Total highest sediment loss of 458.2 g and 313.4 g were observed at angle 15 0 and 12 0 respectively. Total surface runoff of 361.5 mm and 445.8 mm were generated at inclined angle of 0 0 and 5 0 , while at angle 12 0 and 15 0 , 564.3 mm and 590.0 mm of surface runoff were generated. In addition, runoff intensity and sediment loss rate were highest at angle 15 0 , while the lowest values of 1.5mm/min and 5.43 g/min were obtained at angle of inclination 5 0 . The results showed that strong relationship existed among the hydrological variables as a result of subjecting the steel bounded soil tray to different angles of inclination. Such results would provide useful data for the running of physics-based deterministic model of surface runoff and erosion which will be useful for the design of hydrological structures, land use planning and management.

  7. Simulated Fizeau ring fringes in transmission through spherical and plane reflected surfaces

    Science.gov (United States)

    Ramadan, W. A.; Wahba, H. H.

    2018-01-01

    In this paper, we present simulated Fizeau ring fringes. These fringes are constructed due to multiple reflection between highly reflected partially transmitted spherical and plane surfaces. The real paths of rays and consequently their amplitudes and phases have been determined when they reached the image plane. This plane is located at a certain distance above the interferometer. In these calculations, the impact of the image plane position, the radius of the spherical surface and the distance between the two surfaces on the fringe intensity distribution are investigated. A quite interesting result of our calculation is that the number of the interfered rays is varied and could be only two, even for a highly reflected surfaces. Three different estimated visualizations are included to give an overview imagination of the impact of the different parameter variation. These could be helpful for researchers for testing of spherical surfaces using interference-based methods.

  8. Comparison of phosphorus fraction distribution and influencing factors of suspended and surface sediments in the Tiaoxi watershed, China.

    Science.gov (United States)

    Ye, Hongmeng; Yuan, Xuyin; Han, Lei; Yin, Heng; Jin, Jing

    2017-05-01

    Suspended and surface sediments from the Tiaoxi watershed, fed by the Xitiaoxi and Dongtiaoxi rivers, were analyzed for total phosphorus (TP) and the inorganic P fractions of loosely adsorbed P that were extractable with NH 4 Cl (NH 4 Cl-P), reductant P (BD-P), metal oxide-bound P extractable with NaOH (NaOH-P), and calcium-bound, HCl-extractable P (HCl-P), while other physicochemical compositions were also determined. The spatial variations of P fractions in these sediments were investigated, and the major factors influencing the various fractions were explored by multivariate statistics. Compared to surface sediments, suspended sediments contained considerably higher concentrations of total nitrogen, TP, organic matter, Al, Fe, Mn and biologically available P (BAP, given as NH 4 Cl-P, BD-P and NaOH-P combined) and lower concentrations of Si, Ca and HCl-P in the studied catchments. Dongtiaoxi sediments had higher TP, inorganic phosphorus and HCl-P concentrations and a lower BAP content compared with Xitiaoxi sediments, trends that were associated with local geological backgrounds, landscapes and anthropogenic characteristics. The results of principal component analysis showed different effects of sediment properties on P fraction distributions for Xitiaoxi and Dongtiaoxi sediments. The sediment components and structure exert a strong influence on BAP in Xitiaoxi sediments, in contrast to Dongtiaoxi sediments, where P fractions are mainly affected by urbanization and other anthropogenic activities such as shipping.

  9. Effect of cosolutes on the sorption of phenanthrene onto mineral surface of river sediments and kaolinite.

    Science.gov (United States)

    Wu, Yinghong; Liu, Fang; Zhang, Wen; Wang, Lei

    2014-01-01

    Sorption of phenanthrene onto the natural sediment with low organic carbon content (OC%), organic-free sediment, and kaolinite was investigated through isotherm experiments. Effects of cosolutes (pyrene, 4-n-nonyphenol (NP), and humic acid (HA)) on phenanthrene sorption were also studied by comparing apparent solid-water distribution coefficients (K d (app)) of phenanthrene. Two addition sequences, including "cosolute added prior to phenanthrene" and "cosolute and phenanthrene added simultaneously," were adopted. The Freundlich model fits phenanthrene sorption on all 3 sorbents well. The sorption coefficients on these sorbents were similar, suggesting that mineral surface plays an important role in the sorption of hydrophobic organic contaminants on low OC% sediments. Cosolutes could affect phenanthrene sorption on the sorbents, which depended on their properties, concentrations, and addition sequences. Pyrene inhibited phenanthrene sorption. Sorbed NP inhibited phenanthrene sorption at low levels and promoted sorption at high levels. Similar to NP, effect of HA on phenanthrene sorption onto the natural sediment depended on its concentrations, whereas, for the organic-free sediment and kaolinite, preloading of HA at high levels led to an enhancement in phenanthrene K d (app) while no obvious effect was observed at low HA levels; dissolved HA could inhibit phenanthrene sorption on the two sorbents.

  10. Distribution and temporal variation of trace metal enrichment in surface sediments of San Jorge Bay, Chile.

    Science.gov (United States)

    Valdés, Jorge; Román, Domingo; Guiñez, Marcos; Rivera, Lidia; Morales, Tatiana; Morales, Tomás; Avila, Juan; Cortés, Pedro

    2010-08-01

    Cu, Pb, and Hg concentrations were determined in surface sediment samples collected at three sites in San Jorge Bay, northern Chile. This study aims to evaluate differences in their spatial distribution and temporal variability. The highest metal concentrations were found at the site "Puerto", where minerals (Cu and Pb) have been loaded for more than 60 years. On the other hand, Hg does not pose a contamination problem in this bay. Cu and Pb concentrations showed significant variations from 1 year to another. These variations seem to be a consequence of the combination of several factors, including changes in the loading and/or storage of minerals in San Jorge Bay, the dredging of bottom sediments (especially at Puerto), and seasonal changes in physical-chemical properties of the water column that modify the exchange of metals at the sediment-water interface. Differences in the contamination factor and geoaccumulation index suggest that pre-industrial concentrations measured in marine sediments of this geographical zone, were better than geological values (average shale, continental crust average) for evaluating the degree of contamination in this coastal system. Based on these last two indexes, San Jorge Bay has a serious problem of Cu and Pb pollution at the three sampling locations. However, only Cu exceeds the national maximum values used to evaluate ecological risk and the health of marine environments. It is suggested that Chilean environmental legislation for marine sediment quality--presently under technical discussion--is not an efficient tool for protecting the marine ecosystem.

  11. Reflection of diffuse light from dielectric one-dimensional rough surfaces.

    Science.gov (United States)

    González-Alcalde, Alma K; Méndez, Eugenio R; Terán, Emiliano; Cuppo, Fabio L S; Olivares, J A; García-Valenzuela, Augusto

    2016-03-01

    We study the reflection of diffuse light from 1D randomly rough dielectric interfaces. Results for the reflectance under diffuse illumination are obtained by rigorous numerical simulations and then contrasted with those obtained for flat surfaces. We also explore the possibility of using perturbation theories and conclude that they are limited for this type of study. Numerical techniques based on Kirchhoff approximation and reduced Rayleigh equations yield better results. We find that, depending on the refractive index contrast and nature of the irregularities, the roughness can increase or decrease the diffuse reflectance of the surface.

  12. NPP/VIIRS Atmospherically Corrected Surface Reflectance 6-Min L2 Swath 375m, 750m NRT

    Data.gov (United States)

    National Aeronautics and Space Administration — The VNP09_NRT is a Near Real Time (NRT) S-NPP/VIIRS 375 m, 750 m Atmospherically Corrected Surface Reflectance product. The NPP/VIIRS surface reflectance products...

  13. MODIS/Aqua Near Real Time (NRT) Surface Reflectance Daily L2G Global 250m SIN Grid

    Data.gov (United States)

    National Aeronautics and Space Administration — The MODIS Near Real Time (NRT) Surface Reflectance products are an estimate of the surface spectral reflectance as it would be measured at ground level in the...

  14. VIIRS/NPP Surface Reflectance Daily L2G Global 1km and 500m SIN Grid V001

    Data.gov (United States)

    National Aeronautics and Space Administration — The Visible Infrared Imaging Radiometer Suite (VIIRS) daily surface reflectance (VNP09GA) Version 1 product provides an estimate of land surface reflectance from the...

  15. Surface Sediment Analysis on Petroleum Hydrocarbon and Total Organic Carbon from Coastal Area of Papar to Tuaran, Sabah

    International Nuclear Information System (INIS)

    Siti Aishah Mohd Ali; Payus, C.; Masni Mohd Ali

    2015-01-01

    Total petroleum hydrocarbons (TPH) and total organic carbon (TOC) were investigated in surface sediments along coastal area of Papar to Tuaran, Sabah. Surface sediment samples were collected in 24 different stations in each area by using Ponar grab sampler. Samples were extracted for TPH using standard method sediment/ sludge APHA 5520E and analyzed using UV/VIS spectrophotometer while for TOC method analysis using United Nations Environment Programme (UNEP)/ MAP Athens (2006). The range of TPH concentrations in surface sediments were recorded at 0.24 - 20.65 mg/ kg dw Miri crude oil equivalents, meanwhile the TOC percentage ranged from 0.03 - 4.02 %. In the mean time, the statistical analysis by Pearson correlation showed a positive correlation with coefficient, r = 0.790 which showing the TPH concentrations significantly have influence on the TOC accumulations in the surface sediment. (author)

  16. Semi-automatic surface sediment sampling system - A prototype to be implemented in bivalve fishing surveys

    Science.gov (United States)

    Rufino, Marta M.; Baptista, Paulo; Pereira, Fábio; Gaspar, Miguel B.

    2018-01-01

    In the current work we propose a new method to sample surface sediment during bivalve fishing surveys. Fishing institutes all around the word carry out regular surveys with the aim of monitoring the stocks of commercial species. These surveys comprise often more than one hundred of sampling stations and cover large geographical areas. Although superficial sediment grain sizes are among the main drivers of benthic communities and provide crucial information for studies on coastal dynamics, overall there is a strong lack of this type of data, possibly, because traditional surface sediment sampling methods use grabs, that require considerable time and effort to be carried out on regular basis or on large areas. In face of these aspects, we developed an easy and un-expensive method to sample superficial sediments, during bivalve fisheries monitoring surveys, without increasing survey time or human resources. The method was successfully evaluated and validated during a typical bivalve survey carried out on the Northwest coast of Portugal, confirming that it had any interference with the survey objectives. Furthermore, the method was validated by collecting samples using a traditional Van Veen grabs (traditional method), which showed a similar grain size composition to the ones collected by the new method, on the same localities. We recommend that the procedure is implemented on regular bivalve fishing surveys, together with an image analysis system to analyse the collected samples. The new method will provide substantial quantity of data on surface sediment in coastal areas, using a non-expensive and efficient manner, with a high potential application in different fields of research.

  17. Heavy metals in the surface sediments of lakes on the Tibetan Plateau, China.

    Science.gov (United States)

    Guo, Bixi; Liu, Yongqin; Zhang, Fan; Hou, Juzhi; Zhang, Hongbo; Li, Chaoliu

    2018-02-01

    Heavy metal contamination has affected many regions in the world, particularly the developing countries of Asia. We investigated 8 heavy metals (Cu, Zn, Cd, Pb, Cr, Co, Ni, and As) in the surface sediments of 18 lakes on the Tibetan Plateau. It was found that the distributions of the heavy metals showed no clear spatial pattern on the plateau. The results indicated that the mean concentrations of these metals in the sediment samples diminished as follows: Cr > As > Zn > Ni > Pb > Cu > Co > Cd. The results of geoaccumulation index (I geo ) and potential ecological risk factor (E i r ) assessments showed that the sediments were moderately polluted by Cd and As, which posed much higher risks than the other metals. The values of the potential ecological risk index (RI) showed that lake Bieruoze Co has been severely polluted by heavy metals. Principal component analysis, hierarchical cluster analysis, and Pearson correlation analysis results indicated that the 8 heavy metals in the lake surface sediments of the Tibetan Plateau could be classified into four groups. Group 1 included Cu, Zn, Pb, Co, and Ni which were mainly derived from both natural and traffic sources. Group 2 included Cd which mainly originated from anthropogenic sources like alloying, electroplating, and dyeing industries and was transported to the Tibetan Plateau by atmospheric circulation. Group 3 included Cr and it might mainly generate from parent rocks of watersheds. The last Group (As) was mainly from manufacturing, living, and the striking deterioration of atmospheric environment of the West, Central Asia, and South Asia.

  18. Heavy metal pollution status in surface sediments of the coastal Bohai Bay.

    Science.gov (United States)

    Gao, Xuelu; Chen, Chen-Tung Arthur

    2012-04-15

    Bohai Bay, the second largest bay of Bohai Sea, largely due to the huge amount of pollutants discharged into it annually and its geohydrologic condition, is considered to be one of the most polluted marine areas in China. To slow down, halt and finally reverse the environmental deterioration of Bohai Sea, some researchers have proposed to connect it with Jiaozhou Bay in the western coast of Southern Yellow Sea by digging an interbasin canal through Shandong Peninsula. In order to assess the heavy metal pollution and provide background information for such a large geoengineering scheme, surface sediments from 42 stations covering both riverine and marine regions of the northwestern coast of Bohai Bay were analyzed for heavy metal content and fractionation (Cd, Cr, Cu, Ni, Pb and Zn). Three empirically derived sediment quality guidelines were used to assess the pollution extent of these metals. The studied metals had low mobility except for Cd at all stations and Zn at some riverine stations. Although a high mobility of Cd was observed, it could hardly cause a bad effect on the environment owing to its low total concentrations. Anthropogenic influence on the accumulation of studied heavy metals in sediments of Bohai Bay was obvious, but their contents were relatively lower to date comparing with some other marine coastal areas that receive important anthropogenic inputs. Taking as a whole, surface sediments of northwestern Bohai Bay had a 21% probability of toxicity based on the mean effects range-median quotient. Copyright © 2012. Published by Elsevier Ltd.

  19. The sparkle of the eye: the impact of ocular surface wetness on corneal light reflection.

    Science.gov (United States)

    Goto, Eiki; Dogru, Murat; Sato, Enrique Adan; Matsumoto, Yukihiro; Takano, Yoji; Tsubota, Kazuo

    2011-04-01

    To measure the sparkle of the human eye evaluated by the intensity of corneal light reflection in normal subjects and dry eye patients to investigate whether ocular surface wetness has an impact on the sparkle of the eye. Prospective case-control study. We examined a consecutive series of eight dry eye patients with Sjögren syndrome (SS, 15 eyes), as well as eight normal subjects (16 eyes). The specular corneal surface light reflection was quantitatively measured with an ophthalmic slit-lamp microscope and image capturing system under fixed conditions of light source, incident angle, and detector sensitivity. The intensity of images from subjects' corneal light reflection was quantified with image analysis software along with the measurement of grade of self-reported brilliancy of the eye, corneal fluorescein staining score, tear film break-up time, and Schirmer test value. The intensity of corneal light reflection was also compared before and after dry eye treatment. The mean intensity of corneal light reflection was significantly lower in dry eye patients (125.0 ± 40.1) than normal subjects (167.6 ± 36.6, P=.004). Grade of self-reported brilliancy of the eye, corneal fluorescein staining scores, tear film break-up time, and Schirmer test values showed good correlation to the intensity of corneal light reflection. After punctal plug treatment, the intensity of corneal light reflection significantly increased from 125.0 ± 40.1 to 167.2 ± 45.0 (Plight reflection representing the sparkle of the eye was significantly more intense in normal subjects compared to dry eye patients, and was increased after punctal plug treatment. The intensity of corneal light reflection appeared to correlate well with tear film stability, volume, and ocular surface desiccation. We showed that tears contributed not only to ocular surface wetness but also to the extent of the light reflection from the eye. Copyright © 2011 Elsevier Inc. All rights reserved.

  20. Reflection of plane waves from free surface of a microstretch elastic ...

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    The problem of reflection of plane waves from free surface of a microstretch elastic solid half-space is studied. The energy ratios for ... axis is taken normal to free surface in downward direction. The region z > 0 is occupied by linear ... Superposed dots on the right hand side of above equations denote the second partial ...

  1. Temperature comparison of different reflective surfaces of a solar thermal collector

    Science.gov (United States)

    Koh, Yit Yan; Chua, Yaw Long; Chin, Kiat Keong

    2017-09-01

    With the rapid depletion of fossil fuels, the search for application of alternative energy sources becomes more important than ever before. Solar energy has been identified as one of the major renewable energy that will contribute to power generation is years to come. There are two major categories of solar energy applications. Solar thermal collector is one of it. This paper presents an investigation on the effect of different reflecting surfaces on solar thermal collector. Three different reflective surfaces were applied on the surface of the solar thermal collector. Data was collected and analyzed. From the results, the aluminum mirror sheet performed best.

  2. Reflections

    Directory of Open Access Journals (Sweden)

    Joanne Embree

    2001-01-01

    Full Text Available Ideally, editorials are written one to two months before publication in the Journal. It was my turn to write this one. I had planned to write the first draft the evening after my clinic on Tuesday, September 11. It didn't get done that night or during the next week. Somehow, the topic that I had originally chosen just didn't seem that important anymore as I, along my friends and colleagues, reflected on the changes that the events of that day were likely to have on our lives.

  3. A high-reflective surface measurement method based on conoscopic holography technology

    Science.gov (United States)

    Cheng, Xu; Li, ZhongWei; Shi, YuSheng; Zhao, HengShuang; Zhan, Guomin

    2014-11-01

    Measuring high-reflective surfaces using optical method is always a big challenging problem. This paper presents a high-reflective surface measurement method based on conoscopic holography technology using a 4D motion platform equipped with a conoscopic holography optical probe. There are two key problems needed to solve before the automate scan of the complex shape surface: the coordinate calibration and the path planning. To improve the calibration efficiency and accuracy, the coordinate calibration is divided into two parts: the rough calibration and the accurate registration. The path planning consists of two aspects including: the path points generation and the path points verification. In addition, by scanning the objects having high-reflective surfaces, such as the metal blades, coins and other work-pieces, the efficiency of the measurement method has been verified.

  4. Distribution of polycyclic aromatic hydrocarbons (PAHs) in surface sediments of Pulau Tinggi, Johor

    Science.gov (United States)

    Razak, Ezzati Sulhi Abdul; Halim, Izzyan Syazwani Abdul; Ali, Masni Mohd

    2016-11-01

    Surface sediments samples were collected at 11 stations around the Pulau Tinggi, Johor in September 2015. A total of 15 PAHs were determined and quantified by gas chromatography coupled with mass spectrometry (GC-MS). The total PAH concentrations of surface sediments from Pulau Tinggi ranged from 39.61 ng/g to 149.2 ng/g and they were classified as being in low to moderate pollution range. Individual PAH analysis showed that two and three rings PAHs were the most frequently detected isomers and accounted for 22 - 46% of the total PAH concentrations. The sources of PAHs were evaluated by employing diagnostic ratiosof specific PAH compounds.PAH ratios analysis showed a prevalence of pyrogenic PAH origin at most of the stations with exception of only a few stations.

  5. From source to sink: Unravelling the complex in situ cosmogenic 10Be-14C signature in eroding bedrock surfaces and river sediment from the Bolivian Altiplano

    Science.gov (United States)

    Hippe, Kristina; Lupker, Maarten; Gordijn, Tiemen; Ivy-Ochs, Susan; Kober, Florian; Christl, Marcus; Wacker, Lukas; Hajdas, Irka; Wieler, Rainer

    2017-04-01

    Sediment storage is a critical component of fluvial sedimentary systems. By interrupting transport processes, intermittent sediment storage can effectively decouple source from sink and buffer the transmission of signals of environmental change (e.g., in climate, vegetation, human impact) through the fluvial system. Combined in situ cosmogenic 14C-10Be analysis in fluvial sediment provides a unique method to simultaneously assess sediment transit times (in situ 14C signal) and long-term sediment production rates from bedrock erosion (10Be signal). The key is the much shorter half-life of in situ 14C compared to 10Be which causes a rapid decrease of the in situ 14C concentration when sediment is buried during sediment storage and creates an offset to 10Be. Here, we use the in situ 14C-10Be chronometer to determine changes in surface erosion and estimate absolute rates of sediment transfer in a catchment on the Bolivian Altiplano. Previous research in the study area has found a significant offset in the in situ 14C-10Be inventories from river sediments with much lower in situ 14C concentrations than expected from the 10Be content for steady-state conditions. This offset has been interpreted to reflect sediment storage over the past 11-20 ka [1]. Additional analyses of in situ 14C and 10Be in a dense network of sediment samples from the main channel and tributaries agree with previous data and yield very low in situ 14C concentrations that suggest an increase in storage duration by a few ka with downstream distance. However, analyses of in situ 14C-10Be in hilltop samples from the eroding source area reveal an almost as large offset as in the river sediments. Such complex in situ 14C-10Be inventories in the source area have a severe impact on the quantification of sediment storage times and strongly challenge previous data interpretation. The most straightforward explanation for the in situ 14C-10Be offset at hilltop locations is a change in denudation rate during the

  6. Clyde tributaries : report of urban stream sediment and surface water geochemistry for Glasgow

    OpenAIRE

    Fordyce, F.M.; O Dochartaigh, B.E.O.; Lister, T.R.; Cooper, R.; Kim, A.; Harrison, I.; Vane, C.; Brown, S.E.

    2004-01-01

    This report presents the results of an urban drainage geochemical survey carried out jointly by the British Geological Survey (BGS) and Glasgow City Council (GCC) during June 2003. 118 stream sediment and 122 surface water samples were collected at a sample density of 1 per 1 km2 from all tributaries draining into the River Clyde within the GCC administrative area. The study was carried out as part of the BGS systematic Geochemical Surveys of Urban Environments (GSUE) programme. Stream sed...

  7. Estimates of radiance reflected towards the zenith at the surface of the sea

    Directory of Open Access Journals (Sweden)

    E. Aas

    2010-10-01

    Full Text Available Remote sensing of water colour by ship-mounted sensors represents an important tool for the validation of satellite products and the monitoring of water quality. The recorded radiance from the sea has to be corrected for the surface-reflected radiance from sun and sky in order to obtain the water-leaving radiance. Here the simple case of radiance reflected towards the zenith is studied. A set of observed sky radiance and solar irradiance data from Oslo has been used together with a Gaussian slope distribution for the sea surface in order to estimate the reflected radiance. The spectral range studied is 405–650 nm, the solar zenith angles are in the range 37°–76°, and the wind speeds are up to 10 m s−1. The analysis of the results show that the reflected radiance has to be separated into three contributions: sky radiance and sun rays reflected at the foam-free surface and irradiance reflected by whitecaps and foam. It is then demonstrated that by using four input values, namely the downward irradiance, the sky radiance from the zenith, the solar zenith angle and the wind speed, it is possible to obtain by simple expressions estimates of the reflected radiance that only differ from the former calculated values by relative errors of less than 5%. The analysis also indicates that for the spectral range studied neither the water-leaving radiance nor the surface-reflected radiance can be disregarded relative to the other one in the Case 2 waters of the Oslofjord-Skagerrak area. The results form a first step towards the study of reflected radiance in viewing angles differing from the nadir direction.

  8. Suppressing light reflection from polycrystalline silicon thin films through surface texturing and silver nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Akhter, Perveen [Department of Physics, University at Albany-SUNY, Albany, New York 12222 (United States); Huang, Mengbing, E-mail: mhuang@albany.edu; Kadakia, Nirag; Spratt, William; Malladi, Girish; Bakhru, Hassarum [SUNY College of Nanoscale Science and Engineering, Albany, New York 12203 (United States)

    2014-09-21

    This work demonstrates a novel method combining ion implantation and silver nanostructures for suppressing light reflection from polycrystalline silicon thin films. Samples were implanted with 20-keV hydrogen ions to a dose of 10¹⁷/cm², and some of them received an additional argon ion implant to a dose of 5×10¹⁵ /cm² at an energy between 30 and 300 keV. Compared to the case with a single H implant, the processing involved both H and Ar implants and post-implantation annealing has created a much higher degree of surface texturing, leading to a more dramatic reduction of light reflection from polycrystalline Si films over a broadband range between 300 and 1200 nm, e.g., optical reflection from the air/Si interface in the AM1.5 sunlight condition decreasing from ~30% with an untextured surface to below 5% for a highly textured surface after post-implantation annealing at 1000°C. Formation of Ag nanostructures on these ion beam processed surfaces further reduces light reflection, and surface texturing is expected to have the benefit of diminishing light absorption losses within large-size (>100 nm) Ag nanoparticles, yielding an increased light trapping efficiency within Si as opposed to the case with Ag nanostructures on a smooth surface. A discussion of the effects of surface textures and Ag nanoparticles on light trapping within Si thin films is also presented with the aid of computer simulations.

  9. Application of a surface complexation model to the interactions of Pu and Am with Esk Estuary sediments

    International Nuclear Information System (INIS)

    Turner, D.R.; Knox, S.; Titley, J.G.; Hamilton-Taylor, J.; Kelly, M.; Williams, G.

    1990-10-01

    Previous work has shown that Pu is remobilised from Esk sediments at low salinities of overlying water. A constant capacitance surface complexation model has been developed in order to understand and model the chemical processes occurring. The model is based on detailed chemical characterisation of sediment samples from the estuary. The following measurements were carried out to provide input parameters for the model: specific surface area; total surface sites (tritium exchange); proton and major ion exchange (potentiometric titration); and actinide (Pu and Am) partition coefficient as a function of pH and salinity at sediment and actinide concentrations typical of the Esk. (author)

  10. Methods of creating solar-reflective nonwhite surfaces and their application to residential roofing materials

    Energy Technology Data Exchange (ETDEWEB)

    Levinson, Ronnen; Berdahl, Paul; Akbari, Hashem [Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, CA 94720 (United States); Miller, William [Oak Ridge National Laboratory, PO Box 2008, MS6070, Oak Ridge, TN 37831 (United States); Joedicke, Ingo [ISP Mineral Products, Inc., 34 Charles St., Hagerstown, MD 21740 (United States); Reilly, Joseph [American Rooftile Coatings, 250 Viking Avenue, Brea, CA 92821 (United States); Suzuki, Yoshi [MCA Clay Tile, 1985 Sampson Avenue, Corona, CA 92879 (United States); Vondran, Michelle [Steelscape Inc., 1200 Arrow Route, Rancho Cucamonga, CA 91730 (United States)

    2007-02-15

    We describe methods for creating solar-reflective nonwhite surfaces and their application to a wide variety of residential roofing materials, including metal, clay tile, concrete tile, wood, and asphalt shingle. Reflectance in the near-infrared (NIR) spectrum (0.7-2.5{mu}m) is maximized by coloring a topcoat with pigments that weakly absorb and (optionally) strongly backscatter NIR radiation, and by adding an NIR-reflective basecoat (e.g., one colored with titanium dioxide rutile white) if both the topcoat and the substrate weakly reflect NIR radiation. Coated steel and glazed clay-tile roofing products achieved NIR reflectances of up to 0.50 and 0.75, respectively, using only cool topcoats. Gray-cement concrete tiles achieved NIR reflectances as high as 0.60 with coatings colored by NIR-scattering pigments. Such tiles could attain NIR reflectances of up to 0.85 by overlaying a white basecoat with a topcoat colored by NIR-transparent organic pigments. Granule-surfaced asphalt shingles achieved NIR reflectances as high as 0.45 when the granules were covered with a white basecoat and a cool color topcoat. (author)

  11. Sensitivity analysis of 6S-based look-up table for surface reflectance retrieval

    Science.gov (United States)

    Lee, Chang Suk; Yeom, Jong Min; Lee, Han Lim; Kim, Jae-Jin; Han, Kyung-Soo

    2015-02-01

    We created a look-up table (LUT) based on the Second Simulation of the Satellite Signal in the Solar Spectrum (6S) radiative transfer model, which reduces large errors in the surface reflectance retrieval under high solar zenith angle (SZA) conditions. The LUT was calculated in 10° SZA intervals containing pre-computed atmospheric correction coefficients as a function of discretized pre-defined input parameters. In order to validate the performance of the LUT, we compared the retrieved surface reflectance using the LUT against a retrieval performed using the simplified method of atmospheric correction (SMAC). These results were validated against MODIS reflectance data (MOD09). The surface reflectance obtained using the LUT was highly correlated with the MOD09, with a coefficient of determination (R2) of 0.88 (red band) and 0.94 (NIR). The retrieved surface reflectance had a root mean-squared error of 0.0132 (red band) and 0.0191 (NIR). Accuracy of surface reflectance retrieved using our LUT with a 10° SZA interval was better than that of the obtained using SMAC. However, certain errors were still present particularly at high SZAs. In order to increase the accuracy at high SZAs, new LUT was computed with a finer SZA interval (5°) at high SZAs. In both red and NIR bands, the R2, fine SZA interval LUT (0.92) were compared to the coarse SZA interval LUT (0.74) of around 65°. Additionally, the run time for surface reflectance retrievals with our LUT was almost comparable to that of the SMAC, an operational model. This study demonstrates that proper SZAs interval for making LUT in high SZA range.

  12. Iterative discrete ordinates solution of the equation for surface-reflected radiance

    Science.gov (United States)

    Radkevich, Alexander

    2017-11-01

    This paper presents a new method of numerical solution of the integral equation for the radiance reflected from an anisotropic surface. The equation relates the radiance at the surface level with BRDF and solutions of the standard radiative transfer problems for a slab with no reflection on its surfaces. It is also shown that the kernel of the equation satisfies the condition of the existence of a unique solution and the convergence of the successive approximations to that solution. The developed method features two basic steps: discretization on a 2D quadrature, and solving the resulting system of algebraic equations with successive over-relaxation method based on the Gauss-Seidel iterative process. Presented numerical examples show good coincidence between the surface-reflected radiance obtained with DISORT and the proposed method. Analysis of contributions of the direct and diffuse (but not yet reflected) parts of the downward radiance to the total solution is performed. Together, they represent a very good initial guess for the iterative process. This fact ensures fast convergence. The numerical evidence is given that the fastest convergence occurs with the relaxation parameter of 1 (no relaxation). An integral equation for BRDF is derived as inversion of the original equation. The potential of this new equation for BRDF retrievals is analyzed. The approach is found not viable as the BRDF equation appears to be an ill-posed problem, and it requires knowledge the surface-reflected radiance on the entire domain of both Sun and viewing zenith angles.

  13. Approaches to surface complexation modeling of Uranium(VI) adsorption on aquifer sediments

    Science.gov (United States)

    Davis, J.A.; Meece, D.E.; Kohler, M.; Curtis, G.P.

    2004-01-01

    Uranium(VI) adsorption onto aquifer sediments was studied in batch experiments as a function of pH and U(VI) and dissolved carbonate concentrations in artificial groundwater solutions. The sediments were collected from an alluvial aquifer at a location upgradient of contamination from a former uranium mill operation at Naturita, Colorado (USA). The ranges of aqueous chemical conditions used in the U(VI) adsorption experiments (pH 6.9 to 7.9; U(VI) concentration 2.5 ?? 10-8 to 1 ?? 10-5 M; partial pressure of carbon dioxide gas 0.05 to 6.8%) were based on the spatial variation in chemical conditions observed in 1999-2000 in the Naturita alluvial aquifer. The major minerals in the sediments were quartz, feldspars, and calcite, with minor amounts of magnetite and clay minerals. Quartz grains commonly exhibited coatings that were greater than 10 nm in thickness and composed of an illite-smectite clay with occluded ferrihydrite and goethite nanoparticles. Chemical extractions of quartz grains removed from the sediments were used to estimate the masses of iron and aluminum present in the coatings. Various surface complexation modeling approaches were compared in terms of the ability to describe the U(VI) experimental data and the data requirements for model application to the sediments. Published models for U(VI) adsorption on reference minerals were applied to predict U(VI) adsorption based on assumptions about the sediment surface composition and physical properties (e.g., surface area and electrical double layer). Predictions from these models were highly variable, with results overpredicting or underpredicting the experimental data, depending on the assumptions used to apply the model. Although the models for reference minerals are supported by detailed experimental studies (and in ideal cases, surface spectroscopy), the results suggest that errors are caused in applying the models directly to the sediments by uncertain knowledge of: 1) the proportion and types of

  14. Resting stage in the biogenic fraction of surface sediments from the deep Mediterranean Sea

    Directory of Open Access Journals (Sweden)

    Luigi della Tommasa

    2004-04-01

    Full Text Available The presence of resting stages in neritic areas is well known, while their occurrence in the deep sea realm has seldom been considered. Recent investigations showed strict interactions between neritic and deep sea domains, due to up- and down-welling phenomena driven by submarine canyons. To estimate the presence of resting stages in deep bottom sediments, seven sediment cores, collected along a trans-Mediterranean transect by means a multi-corer during the TRANSMED survey (1999, were studied. Most biogenic sediment was composed of Foraminifera tests (tens of thousand tests cm-3, Calciodinellum albatrosianum and Leonella granifera (Dinophyta cysts (up to thousands cysts cm-3. Eleven dinocyst morphotypes were recorded mainly as empty shells (seven calcareous-walled: C. albatrosianum, Calciperidinium asymmetricum, Leonella granifera, Scrippsiella trochoidea, S. precaria type 1, S. precaria type 2, S. regalis; four organic-walled: Impagidinium aculeatum, unid. dinocyst 1, unid. dinocyst 2 and unid. dinocyst 3, while no metazoan resting eggs were observed. The presence of viable resting stages in deep bottom surface sediments was much lower than in neritic areas, suggesting that oceanic species do not produce cysts for a "benthic resting" strategy. Further taxonomic and biogeographic studies are needed to better understand the ecological dynamics of oceanic plankton in the Mediterranean Sea.

  15. Effect of soil surface conditions on runoff velocity and sediment mean aggregate diameter

    Science.gov (United States)

    César Ramos, Júlio; Bertol, Ildegardis; Paz González, Antonio; de Souza Werner, Romeu; Marioti, Juliana; Henrique Bandeira, Douglas; Andrighetti Leolatto, Lidiane

    2013-04-01

    Soil cover and soil management are the factors that most influence soil erosion by water, because they directly affect soil surface roughness and surface cover. The main effect of soil cover by crop residues consists in dissipation of kinetic energy of raindrops and also partly kinetic energy of runoff, so that the soil disaggregation is considerably reduced but, in addition, soil cover captures detached soil particles, retains water on its surface and decreases runoff volume and velocity. In turn, soil surface roughness, influences soil surface water storage and infiltration and also runoff volume and velocity, sediment retention and subsequently water and sediment losses. Based on the above rationale, we performed a field experiment to assess the influence of soil cover and soil surface roughness on decay of runoff velocity as well as on mean diameter of transported sediments (D50 index). The following treatments were evaluated: SRR) residues of Italian ryegrass (Lolium multiflorum) on a smooth soil surfcace, SRV) residues of common vetch (Vicia sativa) on a smooth soil surface, SSR) scarification after cultivation of Italian ryegrass resulting in a rough surface, SSV) scarification after cultivation of common vetch resulting in a rough surface, and SBS) scarified bare soil with high roughness as a control. The field experiments was performed on an Inceptisol in South Brazil under simulated rainfall conditions during 2012. Experimental plots were 11 m long and 3.5 m wide with an area of 38.5 m2. Six successive simulated rainfall tests were applied using a rotating-boom rain simulator. During each test, rain intensity was 60 mmhr-1, whereas rain duration was 90 minutes. Runoff velocity showed no significant differences between cultivated treatments. However, when compared to bare soil treatment, SBS (0.178 m s-1) and irrespective of the presence of surface crop residues or scarification operations, cultivated soil treatments significantly reduced runoff velocity

  16. Microbial methanogenesis in the sulfate-reducing zone of surface sediments traversing the Peruvian margin

    Science.gov (United States)

    Maltby, J.; Sommer, S.; Dale, A. W.; Treude, T.

    2016-01-01

    We studied the concurrence of methanogenesis and sulfate reduction in surface sediments (0-25 cm below sea floor) at six stations (70, 145, 253, 407, 990 and 1024 m) along the Peruvian margin (12° S). This oceanographic region is characterized by high carbon export to the seafloor creating an extensive oxygen minimum zone (OMZ) on the shelf, both factors that could favor surface methanogenesis. Sediments sampled along the depth transect traversed areas of anoxic and oxic conditions in the bottom-near water. Net methane production (batch incubations) and sulfate reduction (35S-sulfate radiotracer incubation) were determined in the upper 0-25 cm b.s.f. of multiple cores from all stations, while deep hydrogenotrophic methanogenesis (> 30 cm b.s.f., 14C-bicarbonate radiotracer incubation) was determined in two gravity cores at selected sites (78 and 407 m). Furthermore, stimulation (methanol addition) and inhibition (molybdate addition) experiments were carried out to investigate the relationship between sulfate reduction and methanogenesis.Highest rates of methanogenesis and sulfate reduction in the surface sediments, integrated over 0-25 cm b.s.f., were observed on the shelf (70-253 m, 0.06-0.1 and 0.5-4.7 mmol m-2 d-1, respectively), while lowest rates were discovered at the deepest site (1024 m, 0.03 and 0.2 mmol m-2 d-1, respectively). The addition of methanol resulted in significantly higher surface methanogenesis activity, suggesting that the process was mostly based on non-competitive substrates - i.e., substrates not used by sulfate reducers. In the deeper sediment horizons, where competition was probably relieved due to the decrease of sulfate, the usage of competitive substrates was confirmed by the detection of hydrogenotrophic activity in the sulfate-depleted zone at the shallow shelf station (70 m).Surface methanogenesis appeared to be correlated to the availability of labile organic matter (C / N ratio) and organic carbon degradation (DIC production

  17. Concentrations and sources of polycyclic aromatic hydrocarbons in surface coastal sediments of the northern Gulf of Mexico

    Science.gov (United States)

    2014-01-01

    Background Coastal sediments in the northern Gulf of Mexico have a high potential of being contaminated by petroleum hydrocarbons, such as polycyclic aromatic hydrocarbons (PAHs), due to extensive petroleum exploration and transportation activities. In this study we evaluated the spatial distribution and contamination sources of PAHs, as well as the bioavailable fraction in the bulk PAH pool, in surface marsh and shelf sediments (top 5 cm) of the northern Gulf of Mexico. Results PAH concentrations in this region ranged from 100 to 856 ng g−1, with the highest concentrations in Mississippi River mouth sediments followed by marsh sediments and then the lowest concentrations in shelf sediments. The PAH concentrations correlated positively with atomic C/N ratios of sedimentary organic matter (OM), suggesting that terrestrial OM preferentially sorbs PAHs relative to marine OM. PAHs with 2 rings were more abundant than those with 5–6 rings in continental shelf sediments, while the opposite was found in marsh sediments. This distribution pattern suggests different contamination sources between shelf and marsh sediments. Based on diagnostic ratios of PAH isomers and principal component analysis, shelf sediment PAHs were petrogenic and those from marsh sediments were pyrogenic. The proportions of bioavailable PAHs in total PAHs were low, ranging from 0.02% to 0.06%, with higher fractions found in marsh than shelf sediments. Conclusion PAH distribution and composition differences between marsh and shelf sediments were influenced by grain size, contamination sources, and the types of organic matter associated with PAHs. Concentrations of PAHs in the study area were below effects low-range, suggesting a low risk to organisms and limited transfer of PAHs into food web. From the source analysis, PAHs in shelf sediments mainly originated from direct petroleum contamination, while those in marsh sediments were from combustion of fossil fuels. PMID:24641695

  18. Innovative eco-friendly bio- solvent for combating sea surface and sedimented oil pollution

    Science.gov (United States)

    Theodorou, Paraskevas

    2017-04-01

    The combating of oil spill at sea surface by chemical dispersants accelerates the evaporation and disperse the oil into the water column, where it is broken down by natural processes and/or is sedimented at the sea bottom, especially at near coastal shallow areas, ports and marinas. The usual methodology for cleaning the sedimented oil from the sea bottom is mainly carried out via excavation and dumping of the polluted sediment into deeper sea areas, where the contamination is transferred from one area to another. The eco-friendly bio-solvent MSL Aqua 250 is an innovative new solution based mainly on natural constituents. The action mechanism and the effectiveness of this eco-friendly solvent is based on the high surface tension process. Organic compounds, including hydrocarbons upon coming in contact with MSL Aqua 250 solvent generate a significant surface tension reaction, which is able to alter the organic compounds to liquid form and then to drastically evaporate it. The use of MSL Aqua 250 solvent, both at sea surface and at the bottom, has the following advantages compared to the dispersants: • Efficient solution without transferring the pollution from sea surface to the water column and to the bottom or disturbing the Aquatic Eco System. • Non-Toxic. • Environmentally friendly with a restoration of marine life in the Eco System. • Cost effective. The MSL Aqua 250 solvent has been tested in cooperation with the Cyprus Department of Fisheries and Marine Research and the Technological University of Cyprus and used during the years 2015 and 2016 in marinas and fishing shelters in Cyprus faced oil pollution, with high concentration in the sea water and at the sea bottom of chemical parameters (BOD5, COD, FOG, TKN, TP, TPH), with excellent results.

  19. Occurrence and profiles of organic sun-blocking agents in surface waters and sediments in Japanese rivers and lakes

    Energy Technology Data Exchange (ETDEWEB)

    Kameda, Yutaka, E-mail: kameda.yutaka@pref.saitama.lg.jp [Center for Environmental Science in Saitama, Kamitanadare 914, Kazo 347-0115 (Japan); Kimura, Kumiko; Miyazaki, Motonobu [Saitama City Institute of Health Science and Research, Suzuya 7-5-12, Chuo-ku, Saitama 338-0013 (Japan)

    2011-06-15

    Sun-blocking agents including eight UV filters (UVF) and 10 UV light stabilizers (UVLS) were measured in water and sediment collected from 22 rivers, four sewage treatment plant effluents (STPE) and three lakes in Japan. Total sun blocking agents levels ranged from N.D. to 4928 ng/L and from 2.0 to 3422 {mu}g/kg dry wt in surface water and in sediment, respectively. Benzyl salicylate, benzophenone-3, 2-ethyl hexyl-4-methoxycinnamte (EHMC) and octyl salicylate were dominant in surface water receiving wastewater effluents and STPE, although UV-328, benzophenone and EHMC were dominant in other surface water except background sites. Three UVF and nine UVLS were observed from all sediment and their compositions showed similar patterns with UV-328 and UV-234 as the most prevalent compounds. Homosalate, octocrylene, UV-326, UV-327, UV-328 and UV-234 were significantly correlated with Galaxolide in sediments. Concentrations of UV-327 and UV-328 also had strong correlation between those of UV-326 in sediment. - Highlights: > Total sun-blocking agents levels ranged from N.D. to 4928 ng/L in surface water from 29 sampling sites. > The maximum concentration of total sun-blocking agents was 3422 {mu}g/kg dry wt. in sediment. > Residential wastewaters and STPE were considered to be potential sources of UVLS in river and lakes. > Most of sun-blocking agents in sediment were significantly correlated with HHCB. > UV-326 had a strong linear correlation between UV-327 as well as UV-328 in all sediment. - Occurrence of eight UV filters and 10 UV light stabilizers in surface water and sediment were investigated and characterized their compositions in water and sediment.

  20. Surface reflectance of Antarctic bryophytes and protection from UV and visible light

    International Nuclear Information System (INIS)

    Robinson, S.A.; Wasley, J.; Turnbull, J.

    2000-01-01

    Full text: As well as determining the amount of solar radiation available for photosynthesis, the surface reflectance and absorptance characteristics of plants are their first defence against damaging effects of solar radiation. The solar spectrum can be damaging to plants in many ways. At shorter wavelengths, UV-B (280-320 nm) radiation can cause lesions in nucleic acid and proteins. Excess levels of visible radiation (400-750) can cause photoinhibition whilst high absorbtance of longer wavelengths (>750) leads to increases in temperature that can be detrimental in some environments. The adaptation of surface reflectance properties of vascular plants to particular environments are well known in some ecosystems. For example in desert ecosystems pubescent leaf surfaces that increase reflectance are common and have been demonstrated to be important to protection from photoinhibition. The epidermal characteristics of some plants are also known to change in absorptance, due to the accumulation of specific compounds. For example flavonoids which are effective screens against UV-B radiation, increase upon exposure to UV-B radiation. In this study we surveyed the natural variability in surface reflectance in mosses growing in continental Antarctica. Antarctica is experiencing large increases in incident UV-B radiation due to reductions in concentrations of stratospheric ozone. Additionally over the summer months (November January), when moss is exposed to direct sunlight, levels of visible solar radiation are also high, increasing the likelihood of photoinhibitory damage in moss. Our aim in this study is to describe the natural variability in the surface reflectance characteristics of moss, such that we have a baseline with which to assess future changes in response to changes in global climate, and imposed experimental treatments, and also to develop hypotheses with respect to how mosses have adapted to the cold and arid antarctic environment. Variability in surface

  1. Concentration, enrichment and distribution of heavy metals in surface sediments of the Tangier Bay, Morocco

    Directory of Open Access Journals (Sweden)

    María Rocío Rodríguez-Barroso

    2010-11-01

    Full Text Available The distribution, enrichment, and accumulation of heavy metals in the surface sediments of the Tangier Bay, Morocco, were investigated. Surface sediment samples from eleven locations in the Bay of Tangier were collected in 2007 and characterized for grain size, organic matter and metal content (e.g. Fe, Mn, Cr, Cu, Ni, Pb, Zn and Cd. The evaluation of the heavy metal contamination status of the bay showed minor enrichment by the enrichment factors (EF calculation, corroborated by the metal pollution index (MPI. The results of a Pearson correlation showed high positive correlations among organic carbon and most metals (0.788 < r < 0.939 and cluster analysis grouped the stations inside the harbour (stations 1, 10 and 9 and in the vicinity of the principal rivers in the bay (stations 3 and 11, which showed the highest concentrations of metal content. The main sources of contamination are domestic and industrial effluents, which arise due to the lack of sewage treatment. However, these areas could not be classified as polluted when the data were compared with sediment quality guidelines (USEPA, 1997.

  2. Fatty Alcohol Variations in Surface Sediments of Sungai Sepang Besar, Sepang, Selangor

    International Nuclear Information System (INIS)

    Masni Mohd Ali; Norfariza Humrawali; Ying, P.Q.; Mohd Talib Latif; Mohamad Pauzi Zakaria

    2011-01-01

    Composition of fatty alcohols from 19 surface sediment samples collected along Sungai Sepang Besar, Sepang, Selangor were determined. The sediments were extracted and analysed using the Gas Chromatography-Mass Spectrometry (GC-MS) technique. A total of 19 fatty alcohols from C 12 to C 30 including 4 branched compounds were identified with concentrations in the range 0.02 μg/ g - 9.01 μg/ g dry weight. C 26 fatty alcohols dominated most sampling stations with concentrations ranging from 0.29 to 5.43 μg/ g dry weight and constituted 15.5 % of total fatty alcohols. According to individual compounds of fatty alcohols and the [Σ(C 12 - C 20 )/ Σ(C 22 - C 30 )] ratio, Sungai Sepang Besar has a high composition of short-chain fatty alcohols (C 12 - C 20 ) which mainly originate from marine organisms. However, the Alcohol Sources Index (ASI) showed that terrestrial derived fatty alcohols dominated the area due to high concentration of C 26 compounds in most sampling stations. The value of (odd chain length)/ (even chain length) ratios were high for almost all the sampling stations due to high bacterial activities. It can be concluded that the surface sediments of Sungai Sepang Besar contained organic materials from marine, terrestrial and bacterial sources. (author)

  3. Heavy metal contamination in surface sediments of Yangtze River intertidal zone: An assessment from different indexes

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Weiguo [State Key Laboratory of Estuarine and Coastal Research, East China Normal University, Shanghai 200062 (China); Feng Huan, E-mail: fengh@mail.montclair.ed [Department of Earth and Environmental Studies, Montclair State University, 1 Normal Avenue, Montclair, NJ 07043 (United States); Chang Jinna; Qu Jianguo; Xie Hongxia; Yu Lizhong [State Key Laboratory of Estuarine and Coastal Research, East China Normal University, Shanghai 200062 (China)

    2009-05-15

    Surface sediments (0-5 cm) from 59 stations within the Yangtze River intertidal zone (YRIZ) were sampled for metal contamination analysis in April and August 2005. The concentrations ranged (in mg kg{sup -1} dry weight): Al, 40,803-97,213; Fe, 20,538-49,627; Cd, 0.12-0.75; Cr, 36.9-173; Cu, 6.87-49.7; Mn, 413-1,112; Ni, 17.6-48.0; Pb, 18.3-44.1; and Zn, 47.6-154; respectively. Among the 59 sampling stations, enrichment factors (EF) indicate enrichment of Cd (52 stations), Cr (54 stations), Cu (5 stations), Ni (26 stations), Pb (5 stations) and Zn (5 stations). Geoaccumulation indexes (I{sub geo}) also suggest individual metal contamination in localized areas. This study indicates that Cd, Cr and Ni enrichment in the YRIZ sediment is widespread whereas Cu, Mn, Pb and Zn enrichment is localized or nonexistent. Factor and cluster analyses indicate that Cd is associated with total organic carbon whereas Cu, Cr, Ni, Pb and Zn have a close association with Mn. - Surface sediment metal enrichment is evidenced for Cd, Cr and Ni in the Yangtze River intertidal zone.

  4. Application of the complex cepstrum to the location of acoustic sources near reflective surfaces

    Science.gov (United States)

    Fuller, C. R.; Tavakkoli, S.; Elliott, K. B.; Hurst, C. J.; Obrien, W. F.

    1987-01-01

    The complex cepstrum is used to correct bearing estimations of acoustic sources in the presence of a reflective surface. An automated liftering procedure is used which zeros out a block portion of the cepstrum including the echo information. The problem of the resulting distortion is alleviated by applying a coherence criterion to the recovered direct signals at each microphone. Thus to a large degree the interactive nature of cepstral processing is overcome for this application. For the test signals and geometries considered the cepstrum is shown to accurately correct for bearing errors in acoustic signals contaminated with reflections from nearby surfaces.

  5. Numerical study of three-dimensional sound reflection from corrugated surface waves.

    Science.gov (United States)

    Choo, Youngmin; Song, H C; Seong, Woojae

    2016-10-01

    When a sound wave propagates in a water medium bounded by a smooth surface wave, reflection from a wave crest can lead to focusing and result in rapid variation of the received waveform as the surface wave moves [Tindle, Deane, and Preisig, J. Acoust. Soc. Am. 125, 66-72 (2009)]. In prior work, propagation paths have been constrained to be in a plane parallel to the direction of corrugated surface waves, i.e., a two-dimensional (2-D) propagation problem. In this paper, the azimuthal dependence of sound propagation as a three-dimensional (3-D) problem is investigated using an efficient, time-domain Helmholtz-Kirchhoff integral formulation. When the source and receiver are in the plane orthogonal to the surface wave direction, the surface wave curvature vanishes in conventional 2-D treatments and the flat surface simply moves up and down, resulting in minimal temporal variation of the reflected signal intensity. On the other hand, the 3-D propagation analysis reveals that a focusing phenomenon occurs in the reflected signal due to the surface wave curvature formed along the orthogonal plane, i.e., out-of-plane scattering.

  6. Early Evaluation of the VIIRS Calibration, Cloud Mask and Surface Reflectance Earth Data Records

    Science.gov (United States)

    Vermote, Eric; Justice, Chris; Csiszar, Ivan

    2014-01-01

    Surface reflectance is one of the key products fromVIIRS and as withMODIS, is used in developing several higherorder land products. The VIIRS Surface Reflectance (SR) Intermediate Product (IP) is based on the heritageMODIS Collection 5 product (Vermote, El Saleous, & Justice, 2002). The quality and character of surface reflectance depend on the accuracy of the VIIRS Cloud Mask (VCM), the aerosol algorithms and the adequate calibration of the sensor. The focus of this paper is the early evaluation of the VIIRS SR product in the context of the maturity of the operational processing system, the Interface Data Processing System (IDPS). After a brief introduction, the paper presents the calibration performance and the role of the surface reflectance in calibration monitoring. The analysis of the performance of the cloud mask with a focus on vegetation monitoring (no snow conditions) shows typical problems over bright surfaces and high elevation sites. Also discussed is the performance of the aerosol input used in the atmospheric correction and in particular the artifacts generated by the use of the Navy Aerosol Analysis and Prediction System. Early quantitative results of the performance of the SR product over the AERONET sites showthatwith the fewadjustments recommended, the accuracy iswithin the threshold specifications. The analysis of the adequacy of the SR product (Land PEATE adjusted version) in applications of societal benefits is then presented. We conclude with a set of recommendations to ensure consistency and continuity of the JPSS mission with the MODIS Land Climate Data Record.

  7. Uptake of radioactivity by marine surface sediments collected in Ghazaouet, west coast of Algeria

    International Nuclear Information System (INIS)

    Noureddine, A.; Baggoura, B.; Hocini, N.; Boulahdid, M.

    1998-01-01

    Samples of surface marine sediments of different grain sizes collected in Ghazaouet, a small bay on the western coast of Algeria, have been examined to measure concentrations of natural and artificial gamma-emitting radionuclides. The aim of this study is to determine the level of radioactivity and its repartition in the sedimentary area. The samples analyzed by direct counting gamma spectrometry, showed relatively high activities for natural radioactivity and revealed measurable quantities of 137 Cs, ranging from 0.66-8.47 Bq kg -1 dry weight. In addition, some of the samples of different nature were sieved in different grain-sizes, to study the uptake of radioactivity. It is found that the sediments of less than 100 μm grain-size have the highest level of uptake of radioactivity

  8. Uptake of radioactivity by marine surface sediments collected in Ghazaouet, west coast of Algeria

    Energy Technology Data Exchange (ETDEWEB)

    Noureddine, A.; Baggoura, B. [Laboratoire d' Environnement, Centre de Radioprotection et de Surete (C.R.S.), Algiers (Algeria); Hocini, N. [Laboratoire de Sedimentologie, Centre de Developpement des Techniques Nucleaires (C.D.T.N.), Algiers (Algeria); Boulahdid, M. [Departement de la Pollution Chimique, Institut des Sciences de la Mer et de l' Amenagement du Littoral, Tipaza (Algeria)

    1998-12-01

    Samples of surface marine sediments of different grain sizes collected in Ghazaouet, a small bay on the western coast of Algeria, have been examined to measure concentrations of natural and artificial gamma-emitting radionuclides. The aim of this study is to determine the level of radioactivity and its repartition in the sedimentary area. The samples analyzed by direct counting gamma spectrometry, showed relatively high activities for natural radioactivity and revealed measurable quantities of {sup 137}Cs, ranging from 0.66-8.47 Bq kg{sup -1} dry weight. In addition, some of the samples of different nature were sieved in different grain-sizes, to study the uptake of radioactivity. It is found that the sediments of less than 100 {mu}m grain-size have the highest level of uptake of radioactivity.

  9. Heavy metals and polycyclic aromatic hydrocarbons in surface sediments of Karoon River, Khuzestan Province, Iran.

    Science.gov (United States)

    Keshavarzi, Behnam; Mokhtarzadeh, Zeinab; Moore, Farid; Rastegari Mehr, Meisam; Lahijanzadeh, Ahmadreza; Rostami, Soqra; Kaabi, Helena

    2015-12-01

    Karoon is the longest river in Iran and provides water for industries located along its banks, such as metal, petrochemical, and oil industries. It is also the source of drinking water for cities such as Ahwas, Abadan, and Khorramshahr. In this study, 34 and 18 surface sediment samples were collected and analyzed for heavy metals (Al, As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn) and polycyclic aromatic hydrocarbons (PAHs). The measured concentrations of heavy metals were compared with US EPA sediment quality guidelines, and the results showed that Cu concentration was above the threshold effect level (TEL) in 65.67% of the samples and Hg concentration was above the effect range median (ERM) in some samples. The results revealed that Hg was severely enriched (5 soap factory and Abadan petrochemical complex. Principal component analysis and cluster analysis also revealed the relationships between the studied parameters and identified their probable sources.

  10. In situ probing of surface hydrides on hydrogenated amorphous silicon using attenuated total reflection infrared spectroscopy

    CERN Document Server

    Kessels, W M M; Sanden, M C M; Aydil, E S

    2002-01-01

    An in situ method based on attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) is presented for detecting surface silicon hydrides on plasma deposited hydrogenated amorphous silicon (a-Si:H) films and for determining their surface concentrations. Surface silicon hydrides are desorbed by exposing the a-Si:H films to low energy ions from a low density Ar plasma and by comparing the infrared spectrum before and after this low energy ion bombardment, the absorptions by surface hydrides can sensitively be separated from absorptions by bulk hydrides incorporated into the film. An experimental comparison with other methods that utilize isotope exchange of the surface hydrogen with deuterium showed good agreement and the advantages and disadvantages of the different methods are discussed. Furthermore, the determination of the composition of the surface hydrogen bondings on the basis of the literature data on hydrogenated crystalline silicon surfaces is presented, and quantification of the h...

  11. Observation on Surface Change of Fragile Glass: Temperature - Time Dependence Studied by X-Ray Reflectivity

    International Nuclear Information System (INIS)

    Kikkawa, Hiroyuki; Kitahara, Amane; Takahashi, Isao

    2004-01-01

    The structural change of a fragile glass surface close to the glass transition temperature Tg is studied by using X-ray reflectivity. Measurements were performed on surfaces of maltitol, which is a typical polyalcohol fragile glass with Tg = 320K. Upon both heating and cooling, we find the following features which are also noticed in silicate glass surfaces: (i) On heating, the surface morphology indicates a variation at temperatures below Tg; (ii) A drastic increase in surface roughness occurs at a temperature about 333K on heating, which is 13K higher than Tg; (iii) During the cooling of the sample, formation of a low-density surface layer (3nm at 293K) is observed. Prior to the crystallization, nm - μm sized domains were grown at the surface, which might not be reported for other glasses

  12. Spatial glyphosate and AMPA redistribution on the soil surface driven by sediment transport processes – A flume experiment

    NARCIS (Netherlands)

    Bento, Célia P.M.; Commelin, Meindert C.; Baartman, Jantiene E.M.; Yang, Xiaomei; Peters, Piet; Mol, Hans G.J.; Ritsema, Coen J.; Geissen, Violette

    2018-01-01

    This study investigates the influence of small-scale sediment transport on glyphosate and AMPA redistribution on the soil surface and on their off-site transport during water erosion events. Both a smooth surface (T1) and a surface with “seeding lines on the contour” (T2) were tested in a rainfall

  13. E. coli Surface Properties Differ between Stream Water and Sediment Environments

    Directory of Open Access Journals (Sweden)

    Xiao Liang

    2016-11-01

    Full Text Available The importance of E. coli as an indicator organism in fresh water has led to numerous studies focusing on cell properties and transport behavior. However, previous studies have been unable to assess if differences in E. coli cell surface properties and genomic variation are associated with different environmental habitats. In this study, we investigated the variation in characteristics of E. coli obtained from stream water and stream bottom sediments. Cell properties were measured for 77 genomically different E. coli strains (44 strains isolated from sediments and 33 strains isolated from water under common stream conditions in the Upper Midwestern United States: pH 8.0, ionic strength 10mM and 22˚C. Measured cell properties include hydrophobicity, zeta potential, net charge, total acidity and extracellular polymeric substance (EPS composition. Our results indicate that stream sediment E. coli had significantly greater hydrophobicity, greater EPS protein content and EPS sugar content, less negative net charge, and higher point of zero charge than stream water E. coli. A significant positive correlation was observed between hydrophobicity and EPS protein for stream sediment E. coli but not for stream water E. coli. Additionally, E. coli surviving in the same habitat tended to have significantly larger (GTG5 genome similarity. After accounting for the intrinsic impact from the genome, environmental habitat was determined to be a factor influencing some cell surface properties, such as hydrophobicity. The diversity of cell properties and its resulting impact on particle interactions should be considered for environmental fate and transport modeling of aquatic indicator organisms such as E. coli.

  14. Sources and distribution of yttrium and rare earth elements in surface sediments from Tagus estuary, Portugal.

    Science.gov (United States)

    Brito, Pedro; Prego, Ricardo; Mil-Homens, Mário; Caçador, Isabel; Caetano, Miguel

    2018-04-15

    The distribution and sources of yttrium and rare-earth elements (YREE) in surface sediments were studied on 78 samples collected in the Tagus estuary (SW Portugal, SW Europe). Yttrium and total REE contents ranged from 2.4 to 32mg·kg -1 and 18 to 210mg·kg -1 , respectively, and exhibited significant correlations with sediment grain-size, Al, Fe, Mg and Mn, suggesting a preferential association to fine-grained material (e.g. aluminosilicates but also Al hydroxides and Fe oxyhydroxides). The PAAS (Post-Archean Australian Shale) normalized patterns display three distinct YREE fractionation pattern groups along the Tagus estuary: a first group, characterized by medium to coarse-grained material, a depleted and almost flat PAAS-normalized pattern, with a positive anomaly of Eu, representing one of the lithogenic components; a second group, characterized mainly by fine-grained sediment, with higher shale-normalized ratios and an enrichment of LREE relative to HREE, associated with waste water treatment plant (WWTP) outfalls, located in the northern margin; and, a third group, of fine-grained material, marked by a significant enrichment of Y, a depletion of Ce and an enrichment of HREE over LREE, located near an inactive chemical-industrial complex (e.g. pyrite roast plant, chemical and phosphorous fertilizer industries), in the southern margin. The data allow the quantification of the YREE contents and its spatial distribution in the surface sediments of the Tagus estuary, identifying the main potential sources and confirming the use of rare earth elements as tracers of anthropogenic activities in highly hydrodynamic estuaries. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. E. coli Surface Properties Differ between Stream Water and Sediment Environments.

    Science.gov (United States)

    Liang, Xiao; Liao, Chunyu; Thompson, Michael L; Soupir, Michelle L; Jarboe, Laura R; Dixon, Philip M

    2016-01-01

    The importance of E. coli as an indicator organism in fresh water has led to numerous studies focusing on cell properties and transport behavior. However, previous studies have been unable to assess if differences in E. coli cell surface properties and genomic variation are associated with different environmental habitats. In this study, we investigated the variation in characteristics of E. coli obtained from stream water and stream bottom sediments. Cell properties were measured for 77 genomically different E. coli strains (44 strains isolated from sediments and 33 strains isolated from water) under common stream conditions in the Upper Midwestern United States: pH 8.0, ionic strength 10 mM and 22°C. Measured cell properties include hydrophobicity, zeta potential, net charge, total acidity, and extracellular polymeric substance (EPS) composition. Our results indicate that stream sediment E. coli had significantly greater hydrophobicity, greater EPS protein content and EPS sugar content, less negative net charge, and higher point of zero charge than stream water E. coli . A significant positive correlation was observed between hydrophobicity and EPS protein for stream sediment E. coli but not for stream water E. coli . Additionally, E. coli surviving in the same habitat tended to have significantly larger (GTG) 5 genome similarity. After accounting for the intrinsic impact from the genome, environmental habitat was determined to be a factor influencing some cell surface properties, such as hydrophobicity. The diversity of cell properties and its resulting impact on particle interactions should be considered for environmental fate and transport modeling of aquatic indicator organisms such as E. coli .

  16. Negligible water surface charge determined using Kelvin probe and total reflection X-ray fluorescence techniques.

    Science.gov (United States)

    Shapovalov, Vladimir L; Möhwald, Helmuth; Konovalov, Oleg V; Knecht, Volker

    2013-09-07

    The water surface charge has been extensively debated in recent decades. Electrophoretic mobilities of air bubbles in water and disjoining pressures between the surfaces of aqueous films suggest that the surface of water exhibits a significant negative charge. This is commonly attributed to a strong adsorption of hydroxide ions at the interface, though spectroscopic measurements and simulation studies suggest surface depletion of hydroxide ions. Alternatively, the negative surface charge could arise from surface contamination with trace charged surfactants. We have probed the variation in the surface charge of water with pH by measuring surface potentials using the Kelvin probe technique. Independently, the abundance in the interfacial layer of "reporter ions" (Rb(+) and Br(-)), which must be affected by a charged surface, has been monitored using the total reflection X-ray fluorescence (TRXF) technique. Special care was taken to prove the high sensitivity of this technique as well as to avoid surface contaminants. The magnitude of the surface charge was found to be below 1 e per 500 nm(2) (TRXF). No evidence of variations in the surface potential between pH 2-3 and pH 9-12 was detected within the accuracies of the methods (5 mV for Kelvin probe and 2 mV for TRXF). Hence, our findings suggest that the clean water surface exhibits negligible charge in a wide pH range.

  17. High-resolution x-ray scatter and reflectivity study of sputtered IR surfaces

    DEFF Research Database (Denmark)

    Christensen, Finn Erland; Abdali, S.; Hornstrup, Allan

    1993-01-01

    In recent years there has been an increased interest in the possible use of Ir as the reflecting surface in X-ray telescope programs. An X-ray study of such surfaces produced by sputtering of Ir on highly polished Zerodur flats is presented here. The study was performed using Fe K(alpha) 1 (6...... result shows that an Ir coating can be produced with nominal bulk density....

  18. Physical and Mechanical Properties of Surface Sediments and methane hydrate-bearing sediments in the Shenhu area of South China Sea

    Science.gov (United States)

    Jiang, J.; Shen, Z.; Jia, Y.

    2017-12-01

    Methane hydrates are superior energy resources and potential predisposing factors of geohazard. With the success in China's persistent exploitation of methane hydrates in the Shenhu area of South China Sea for 60 days, there is an increasing demand for detailed knowledge of sediment properties and hazard assessment in this area. In this paper, the physical and mechanical properties of both the surface sediments and methane hydrate-bearing sediments (MHBS) in the exploitation area, the Shenhu area of South China Sea, were investigated using laboratory geotechnical experiments, and triaxial tests were carried out on remolded sediment samples using a modified triaxial apparatus. The results show that sediments in this area are mainly silt with high moisture content, high plasticity, low permeability and low shear strength. The moisture content and permeability decrease while the shear strength increases with the increasing depth. The elastic modulus and peak strength of MHBS increase with the increasing effective confining pressure and higher hydrate saturation. The cohesion increases with higher hydrate saturation while the internal friction angle is barely affected by hydrate saturation. The obtained results demonstrate clearly that methane hydrates have significant impacts on the physical and mechanical properties of sediments and there is still a wide gap in knowledge about MHBS.

  19. Impact of MODIS Sensor Calibration Updates on Greenland Ice Sheet Surface Reflectance and Albedo Trends

    Science.gov (United States)

    Casey, Kimberly A.; Polashenski, Chris M.; Chen, Justin; Tedesco, Marco

    2017-01-01

    We evaluate Greenland Ice Sheet (GrIS) surface reflectance and albedo trends using the newly released Collection 6 (C6) MODIS (Moderate Resolution Imaging Spectroradiometer) products over the period 2001-2016. We find that the correction of MODIS sensor degradation provided in the new C6 data products reduces the magnitude of the surface reflectance and albedo decline trends obtained from previous MODIS data (i.e., Collection 5, C5). Collection 5 and 6 data product analysis over GrIS is characterized by surface (i.e., wet vs. dry) and elevation (i.e., 500-2000 m, 2000 m and greater) conditions over the summer season from 1 June to 31 August. Notably, the visible-wavelength declining reflectance trends identified in several bands of MODIS C5 data from previous studies are only slightly detected at reduced magnitude in the C6 versions over the dry snow area. Declining albedo in the wet snow and ice area remains over the MODIS record in the C6 product, albeit at a lower magnitude than obtained using C5 data. Further analyses of C6 spectral reflectance trends show both reflectance increases and decreases in select bands and regions, suggesting that several competing processes are contributing to Greenland Ice Sheet albedo change. Investigators using MODIS data for other ocean, atmosphere and/or land analyses are urged to consider similar re-examinations of trends previously established using C5 data.

  20. Impact of MODIS sensor calibration updates on Greenland Ice Sheet surface reflectance and albedo trends

    Science.gov (United States)

    Casey, Kimberly A.; Polashenski, Chris M.; Chen, Justin; Tedesco, Marco

    2017-08-01

    We evaluate Greenland Ice Sheet (GrIS) surface reflectance and albedo trends using the newly released Collection 6 (C6) MODIS (Moderate Resolution Imaging Spectroradiometer) products over the period 2001-2016. We find that the correction of MODIS sensor degradation provided in the new C6 data products reduces the magnitude of the surface reflectance and albedo decline trends obtained from previous MODIS data (i.e., Collection 5, C5). Collection 5 and 6 data product analysis over GrIS is characterized by surface (i.e., wet vs. dry) and elevation (i.e., 500-2000 m, 2000 m and greater) conditions over the summer season from 1 June to 31 August. Notably, the visible-wavelength declining reflectance trends identified in several bands of MODIS C5 data from previous studies are only slightly detected at reduced magnitude in the C6 versions over the dry snow area. Declining albedo in the wet snow and ice area remains over the MODIS record in the C6 product, albeit at a lower magnitude than obtained using C5 data. Further analyses of C6 spectral reflectance trends show both reflectance increases and decreases in select bands and regions, suggesting that several competing processes are contributing to Greenland Ice Sheet albedo change. Investigators using MODIS data for other ocean, atmosphere and/or land analyses are urged to consider similar re-examinations of trends previously established using C5 data.

  1. Impact of MODIS sensor calibration updates on Greenland Ice Sheet surface reflectance and albedo trends

    Directory of Open Access Journals (Sweden)

    K. A. Casey

    2017-08-01

    Full Text Available We evaluate Greenland Ice Sheet (GrIS surface reflectance and albedo trends using the newly released Collection 6 (C6 MODIS (Moderate Resolution Imaging Spectroradiometer products over the period 2001–2016. We find that the correction of MODIS sensor degradation provided in the new C6 data products reduces the magnitude of the surface reflectance and albedo decline trends obtained from previous MODIS data (i.e., Collection 5, C5. Collection 5 and 6 data product analysis over GrIS is characterized by surface (i.e., wet vs. dry and elevation (i.e., 500–2000 m, 2000 m and greater conditions over the summer season from 1 June to 31 August. Notably, the visible-wavelength declining reflectance trends identified in several bands of MODIS C5 data from previous studies are only slightly detected at reduced magnitude in the C6 versions over the dry snow area. Declining albedo in the wet snow and ice area remains over the MODIS record in the C6 product, albeit at a lower magnitude than obtained using C5 data. Further analyses of C6 spectral reflectance trends show both reflectance increases and decreases in select bands and regions, suggesting that several competing processes are contributing to Greenland Ice Sheet albedo change. Investigators using MODIS data for other ocean, atmosphere and/or land analyses are urged to consider similar re-examinations of trends previously established using C5 data.

  2. Near-surface 3D reflections seismic survey; Sanjigen senso hanshaho jishin tansa

    Energy Technology Data Exchange (ETDEWEB)

    Nakahigashi, H.; Mitsui, H.; Nakano, O.; Kobayashi, T. [DIA Consultants Co. Ltd., Tokyo (Japan)

    1997-05-27

    Faults are being actively investigated across Japan since the Great Hanshin-Awaji Earthquake. Discussed in this report is the application of the 3D near-surface reflection seismic survey in big cities. Data from trenching and drilling is used for the geological interpretation of the surroundings of a fault, and the reflection seismic survey is used to identify the position, etc., of the fault. In this article, when the results obtained from the experimental field are examined, it is found that the conventional 2D imaging reflection survey betrays the limit of its capability when the geological structure is complicated, that the 3D reflection seismic survey, on the contrary, is capable of high-precision imaging and, when augmented by drilling, etc., becomes capable of a more detailed interpretation, and that it also contributes effectively to the improvement of local disaster prevention in big cities. Using as the model the Tachikawa fault that runs near JR Tachikawa Station, embodiment of the 3D reflection seismic survey is reviewed. For the acquisition of data excellent in quality in a 3D reflection seismic survey conducted utilizing the roads in the sector chosen for experiment in the urban area, the shock generating points and receiving points should be positioned by taking into account the parameters in the bin arranging process so that the mid-points will be regularly distributed on the surface. 3 refs., 11 figs., 1 tab.

  3. LiDAR Relative Reflectivity Surface (2011) for Fish Bay, St. John

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This image represents a LiDAR (Light Detection & Ranging) 0.3x0.3 meter resolution relative seafloor reflectivity surface for Fish Bay, St. John in the U.S....

  4. LiDAR Relative Reflectivity Surface (2011) for Coral Bay, St. John

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This image represents a LiDAR (Light Detection & Ranging) 0.3x0.3 meter resolution relative seafloor reflectivity surface for Coral Bay, St. John in the U.S....

  5. Introducing a mini-catamaran to perform reflectance measurements above and below the water surface

    Science.gov (United States)

    Froidefond, Jean-Marie; Ouillon, Sylvain

    2005-02-01

    An innovative platform is tested to perform reflectance measurements at sea. This platform is a mini-catamaran with two hulls 1m long and set 0.7m apart, fitted with optical sensors. It can be used far away from an oceanographic ship to avoid its hull influencing the measurement. Reflectance measurements were performed with a TriOS radiance sensor placed +2cm or -2cm from the water surface and a TriOS irradiance sensor. Tests were carried out in calm seas and with cloud cover. The processing to derive marine radiances from raw measurements is detailed. When the radiance sensor is above the interface, it limits the sky reflections on the targeted surface and the radiance is identical to that deduced from measurements below the surface. When the sensor is placed at +3cm abovewater or higher, glint affects the measurements. The mini-catamaran shows a good ability to measure marine reflectance with an adapted measurement protocol. Except for very turbid waters, it seems preferable to perform upwelling radiance measurements below the surface.

  6. Total reflection PIXE (TPIXE) and RBS for surface and trace element analysis.

    NARCIS (Netherlands)

    van Kan, J.A.; Vis, R.D.

    1996-01-01

    MeV proton and α beams at small incident angles (0-35 mrad) were used to analyse flat surfaces such as Si wafers and coated quartz substrates. X-rays and backscattered particles were detected in a total reflection geometry. Using TPIXE a quick and simultaneous detection of different trace elements

  7. The normalization of surface anisotropy effects present in SEVIRI reflectances by using the MODIS BRDF method

    DEFF Research Database (Denmark)

    Proud, Simon Richard; Zhang, Qingling; Schaaf, Crystal

    2014-01-01

    A modified version of the MODerate resolution Imaging Spectroradiometer (MODIS) bidirectional reflectance distribution function (BRDF) algorithm is presented for use in the angular normalization of surface reflectance data gathered by the Spinning Enhanced Visible and InfraRed Imager (SEVIRI......) aboard the geostationary Meteosat Second Generation (MSG) satellites. We present early and provisional daily nadir BRDF-adjusted reflectance (NBAR) data in the visible and near-infrared MSG channels. These utilize the high temporal resolution of MSG to produce BRDF retrievals with a greatly reduced...... acquisition period than the comparable MODIS products while, at the same time, removing many of the angular perturbations present within the original MSG data. The NBAR data are validated against reflectance data from the MODIS instrument and in situ data gathered at a field location in Africa throughout 2008...

  8. Suppressing light reflection from polycrystalline silicon thin films through surface texturing and silver nanostructures

    International Nuclear Information System (INIS)

    Akhter, Perveen; Huang, Mengbing; Kadakia, Nirag; Spratt, William; Malladi, Girish; Bakhru, Hassarum

    2014-01-01

    This work demonstrates a novel method combining ion implantation and silver nanostructures for suppressing light reflection from polycrystalline silicon thin films. Samples were implanted with 20-keV hydrogen ions to a dose of 10 17 /cm 2 , and some of them received an additional argon ion implant to a dose of 5 × 10 15 /cm 2 at an energy between 30 and 300 keV. Compared to the case with a single H implant, the processing involved both H and Ar implants and post-implantation annealing has created a much higher degree of surface texturing, leading to a more dramatic reduction of light reflection from polycrystalline Si films over a broadband range between 300 and 1200 nm, e.g., optical reflection from the air/Si interface in the AM1.5 sunlight condition decreasing from ∼30% with an untextured surface to below 5% for a highly textured surface after post-implantation annealing at 1000 °C. Formation of Ag nanostructures on these ion beam processed surfaces further reduces light reflection, and surface texturing is expected to have the benefit of diminishing light absorption losses within large-size (>100 nm) Ag nanoparticles, yielding an increased light trapping efficiency within Si as opposed to the case with Ag nanostructures on a smooth surface. A discussion of the effects of surface textures and Ag nanoparticles on light trapping within Si thin films is also presented with the aid of computer simulations.

  9. Methods of Creating Solar-Reflective Nonwhite Surfaces and theirApplication to Residential Roofing Materials

    Energy Technology Data Exchange (ETDEWEB)

    Levinson, Ronnen; Berdahl, Paul; Akbari, Hashem; Miller, William; Joedicke, Ingo; Reilly, Joseph; Suzuki, Yoshi; Vondran, Michelle

    2005-05-24

    We describe methods for creating solar-reflective nonwhitesurfaces and their application to a wide variety of residential roofingmaterials, including metal, clay tile, concrete tile, wood, and asphaltshingle. Reflectance in the near-infrared (NIR) spectrum (0.7 2.5mu m) ismaximized by coloring a topcoatwith pigments that weakly absorb and(optionally) strongly backscatter NIR radiation, and adding anNIR-reflective basecoat (e.g., titanium dioxide white) if both thetopcoat and substrate weakly reflect NIR radiation. Coated steel andglazed clay tile roofing products achieved NIRreflectances of up to 0.50and 0.75, respectively, using only cool topcoats. Gray concrete tilesachieve NIR reflectances as high as 0.60 when thickly coated withNIR-scattering pigments, and could attain an NIR reflectances as high as0.85 by overlaying a titanium-dioxide basecoat with a topcoat colored byNIR-transparent organic pigments. Granule-surfaced asphalt shinglesachieved NIR reflectances as high as 0.45 when a cool color topcoat wasapplied over a thick white basecoat.

  10. Selected anionic and cationic surface active agents: case study on the Kłodnica sediments

    Directory of Open Access Journals (Sweden)

    Olkowska Ewa

    2017-03-01

    Full Text Available Surface active agents (surfactants are a group of chemical compounds, which are used as ingredients of detergents, cleaning products, cosmetics and functional products. After use, wastes containing surfactants or their degradation products are discharged to wastewater treatment plants or directly into surface waters. Due to their specific properties of SAAs, compounds are able to migrate between different environmental compartments such as soil, sediment, water or even living organisms and accumulate there. Surfactants can have a harmful effect on living organisms. They can connect with bioactive molecules and modify their function. Additionally, they have the ability to migrate into cells and cause their damage or death. For these reasons investigation of individual surfactants should be conducted. The presented research has been undertaken to obtain information about SAA contamination of sediment from the River Kłodnica catchment caused by selected anionic (linear alkylbenzene sulfonates (LAS C10-C13 and cationic (alkylbenzyldimethylammonium (BDMA-C12-16, alkyl trimethyl ammonium (DTMA, hexadecyl piridinium chloride (HP chlorides surfactants. This river flows through an area of the Upper Silesia Industrial Region where various companies and other institutions (e.g. coal mining, power plants, metallurgy, hospitals are located. To determine their concentration the following analytical tools have been applied: accelerated solvent extraction– solid phase extraction – high performance liquid chromatography – UV-Vis (anionic SAAs and conductivity (cationic SAAs detectors. In all sediments anionic SAAs have been detected. The concentrations of HTMA and BDMA-C16 in tested samples were higher than other cationic analytes. Generally, levels of surfactants with longer alkyl chains were higher and this observation can confirm their higher susceptibility to sorption on solid surfaces.

  11. Shift in the microbial community composition of surface water and sediment along an urban river.

    Science.gov (United States)

    Wang, Lan; Zhang, Jing; Li, Huilin; Yang, Hong; Peng, Chao; Peng, Zhengsong; Lu, Lu

    2018-01-30

    Urban rivers represent a unique ecosystem in which pollution occurs regularly, leading to significantly altered of chemical and biological characteristics of the surface water and sediments. However, the impact of urbanization on the diversity and structure of the river microbial community has not been well documented. As a major tributary of the Yangtze River, the Jialing River flows through many cities. Here, a comprehensive analysis of the spatial microbial distribution in the surface water and sediments in the Nanchong section of Jialing River and its two urban branches was conducted using 16S rRNA gene-based Illumina MiSeq sequencing. The results revealed distinct differences in surface water bacterial composition along the river with a differential distribution of Proteobacteria, Cyanobacteria, Actinobacteria, Bacteroidetes and Acidobacteria (P urban water. PICRUSt metabolic inference analysis revealed a growing number of genes associated with xenobiotic metabolism and nitrogen metabolism in the urban water, indicating that urban discharges might act as the dominant selective force to alter the microbial communities. Redundancy analysis suggested that the microbial community structure was influenced by several environmental factors. TP (P urban river. These results highlight that river microbial communities exhibit spatial variation in urban areas due to the joint influence of chemical variables associated with sewage discharging and construction of hydropower stations. Copyright © 2018 Elsevier B.V. All rights reserved.

  12. PBDD/Fs in surface sediments from the East River, China.

    Science.gov (United States)

    Ren, M; Peng, P A; Chen, D Y; Chen, P; Zhou, L

    2009-09-01

    The contamination status of polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) was preliminarily investigated in surface sediments from the East River. The concentrations of eight 2,3,7,8-substituted tetra- to hexa- PBDD/Fs were found to be in the range of 0.32-110 (mean 13) pg g(-1) and the corresponding TEQ concentrations were 0.087-18 (mean 2) pg I-TEQ g(-1). All sediments were characterized by the dominant PBDFs. 2,3,4,7,8-PeBDF was the most important TEQ contributor, accounting for 47%-77% of the total I-TEQ of PBDD/Fs. PCDD/Fs contributed dominantly to the total TEQs of PCDD/Fs, PBDD/Fs and dioxin-like PCBs in most samples except of the sediment from the Shima River. The higher PBDD/F concentrations in the Shima River may be attributed to the use of BFRs in the electrical and electronics industries, which posed a potential risk of dioxins on ecological system.

  13. Sensitivity-Based Modeling of Evaluating Surface Runoff and Sediment Load using Digital and Analog Mechanisms

    Directory of Open Access Journals (Sweden)

    Olotu Yahaya

    2014-07-01

    Full Text Available Analyses of runoff- sediment measurement and evaluation using automated and convectional runoff-meters was carried out at Meteorological and Hydrological Station of Auchi Polytechnic, Auchi using two runoff plots (ABCDa and EFGHm of area 2m 2 each, depth 0.26 m and driven into the soil to the depth of 0.13m. Runoff depths and intensities were measured from each of the positioned runoff plot. Automated runoff-meter has a measuring accuracy of ±0.001l/±0.025 mm and rainfall depth-intensity was measured using tipping-bucket rainguage during the period of 14-month of experimentation. Minimum and maximum rainfall depths of 1.2 and 190.3 mm correspond to measured runoff depths (MRo of 0.0 mm for both measurement approaches and 60.4 mm and 48.9 mm respectively. Automated runoffmeter provides precise, accurate and instantaneous result over the convectional measurement of surface runoff. Runoff measuring accuracy for automated runoff-meter from the plot (ABCDa produces R 2 = 0.99; while R 2 = 0.96 for manual evaluation in plot (EFGHm. WEPP and SWAT models were used to simulate the obtained hydrological variables from the applied measurement mechanisms. The outputs of sensitivity simulation analysis indicate that data from automated measuring systems gives a better modelling index and such could be used for running robust runoff-sediment predictive modelling technique under different reservoir sedimentation and water management scenarios.

  14. Horizontal and vertical distribution of lignin in surface sediments of the Gdansk Basin

    Directory of Open Access Journals (Sweden)

    Andrzej Staniszewski

    2001-12-01

    Full Text Available The aim of this study was to identify and quantify lignin transported from the River Vistula to the accumulation area in the Gdansk Basin. Sediment samples collected along the Vistula mouth - Gdansk Deep transect were analysed for lignin. Lignin was characterised by oxidative degradation, cupric oxide being chosen as the most suitable oxidising agent. The polar functional groups of the oxidation products were silylated and the derivatives analysed by capillary gas chromatography on fused capillary silica columns with flame ionisation detection. Lignin-derived oxidation products were quantified in the range from 3 to 20 µg g-1 dry wt. for phenolic acids and from 6 to 12 µg g-1 dry wt. for phenolic aldehydes. Differences in oxidation products contents are assigned to different lignin sources in the marine environment. The horizontal and vertical gradients of these compounds in the sediments of the Gdansk Basin are documented. The results are discussed in terms of the origin and fate of organic matter in the Gdansk Basin. The measured differences in quality and quantity of the identified oxidation products provide insight into diagenetic processes in the surface marine sediments.

  15. Assessment of metals contamination in Klang River surface sediments by using different indexes

    Directory of Open Access Journals (Sweden)

    Abolfazl Naji

    2011-01-01

    Full Text Available Surface sediments (0-5 cm from 21 stations throughout Klang River were sampled for metal concentration as well sediment's pH, total organic carbon (TOC and particles sizes to obtain an overall classification of metal contaminations in the area. The concentration of metals (µg∕g, Fe%, dw were as follows: 0.57- 2.19 Cd; 31.89-272.33 Zn; 5.96-24.47 Ni; 10.57- 52.87 Cu; 24.23-64.11 Pb and 1.56-3.03 Fe. The degree of sediment contaminations were computed using an enrichment factor (EF and geoaccumulation index (Igeo. The results suggested that enrichment factor and geoaccumulation values of Cd were greatest among the studied metals. Pearson's correlation indicated that effectiveness of TOC in controlling the distribution and enrichment of metals was a more important factor than that of the grain size (< 63µm. The study revealed that on the basis of computed indexes, Klang River is classified as moderately polluted river.

  16. Lactoperoxidase catalyzed radioiodination of cell surface immunoglobulin: incorporated radioactivity may not reflect relative cell surface Ig density

    International Nuclear Information System (INIS)

    Wilder, R.L.; Yuen, C.C.; Mage, R.G.

    1979-01-01

    Rabbit and mouse splenic lymphocytes were radioiodinated by the lactoperoxidase technique, extracted with non-ionic detergent, immunoprecipitated with high titered rabbit anti-kappa antisera, and compared by SDS-PAGE. Mouse sIg peaks were reproducibly larger in size than rabbit sIg peaks (often greater than 10 times). Neither differences in incorporation of label into the rabbit cell surface, nor differences in average sIg density explain this result. Total TCA-precipitable radioactivity was similar in each species. Estimation of the relative amounts of sIg in the mouse and rabbit showed similar average sIg densities. Differences in detergent solubility, proteolytic lability, or antisera used also do not adequately account for this difference. Thus, these data indicate that radioactivity incorporated after lactoperoxidase catalyzed cell surface radioiodination may not reflect cell surface Ig density. Conclusions about cell surface density based upon relative incorporation of radioactivity should be confirmed by other approaches

  17. Critical coupling of surface plasmons in graphene attenuated total reflection geometry

    Energy Technology Data Exchange (ETDEWEB)

    Cuevas, Mauro, E-mail: cuevas@df.uba.ar [Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET) and Facultad de Ingeniería y Tecnología Informática, Universidad de Belgrano, Villanueva 1324, C1426BMJ, Buenos Aires (Argentina); Grupo de Electromagnetismo Aplicado, Departamento de Física, FCEN, Universidad de Buenos Aires and IFIBA, Ciudad Universitaria, Pabellón I, C1428EHA, Buenos Aires (Argentina)

    2016-12-09

    We study the optical response of an attenuated total reflection (ATR) structure in Otto configuration with graphene sheet, paying especial attention to the occurrence of total absorption. Our results show that due to excitation of surface plasmons on the graphene sheet, two different conditions of total absorption may occur. At these conditions, the energy loss of the surface plasmon by radiation is equal to its energy loss by absorption into the graphene sheet. We give necessary conditions on ATR parameters for the existence of total absorption. - Highlights: • Attenuated total reflection (ATR) structure with graphene sheet. • Surface plasmons and power matched condition. • Necessary conditions on ATR parameters for the existence of total absorption.

  18. A compact ESPI system for displacement measurements of specular reflecting or optical rough surfaces

    DEFF Research Database (Denmark)

    Hansen, R.S.

    2004-01-01

    A stable and compact speckle interferometer for doing out-of-plane displacement measurements on reflective as well as diffusely scattering object surfaces is demonstrated. The set-up is based on a nearly path length compensated interferometer of the Fizeau type and uses diffuse illumination...... of the object combined with a speckled reference wave. This combination eliminates the need for special optical components, and the interferometer can be built of commonly available components. The diffuse illumination wave is obtained by scattering coherent light from a diffusely scattering surface....... The speckled reference wave is established by reflecting a part of the diffuse illumination wave from a glass plate placed in front of the object. Besides relaxing the alignment tolerances of the set-up, the diffuse illumination eliminates the need for any preparation of the surface under test, which turns...

  19. Contamination by persistent toxic substances in surface sediment of urban rivers in Chaohu City, China.

    Science.gov (United States)

    Li, Feipeng; Zhang, Haiping; Meng, Xiangzhou; Chen, Ling; Yin, Daqiang

    2012-01-01

    The concentration and spatial distribution of persistent toxic substances (PTS) in the river sediment in Chaohu City, China were investigated. A total of nine surface sediments were collected and the selected PTS pollutants including six heavy metals and nineteen polybrominated diphenyl ethers (PBDEs) were analyzed. The mean heavy metal concentrations (in mg/kg, dry weight) ranged within 0.18-1.53 (Hg), 50.08-200.18 (Cu), 118.70-313.65 (Zn), 50.77-310.85 (Cr), 37.12-92.72 (Pb) and 13.29-197.24 (As), and Cu, Zn and As have been regarded as the main metal pollutants. The levels of PBDEs (1.2-12.1 ng/g) and BDE-209 (2.4-30.5 ng/g) were at the middle level of the global range. BDE-209 was the predominant congener (67.0%-85.7%), which agrees with the fact that technical deca-BDE mixtures are the dominant PBDE formulation in China. The relative high level of PTS pollutants in the western part of the city is probably owing to the intensive agricultural activities and lack of sewerage system there. The ecological risk assessment with the sediment quality guidelines (SOGs) indicates that the urban river sediments in the city have been heavily contaminated by heavy metals with probable ecotoxicological impacts on freshwater organisms and the main toxic pollutants are Hg and As. The results of current study imply that the city, and perhaps many other small cities in China as well, requires immediate pollution control measures with emphasis on not only conventional organic pollutants but also on PTS such as heavy metals and PBDEs.

  20. Intensity distributions of reflected surface channeling protons scattered on surfaces of electron-bombarded alkali halide crystals

    Science.gov (United States)

    Fukazawa, Y.; Kihara, K.; Iwamoto, K.; Susuki, Y.

    2013-11-01

    We have examined the surface-channeling of 550 keV protons on electron-bombarded KBr(0 0 1) surfaces at grazing incidence. On the surface, electron-stimulated desorption (ESD) resulting from the irradiation of 5 keV electrons changes the surface morphology. In order to investigate the change of the surface morphology, the luminous intensity distributions observed on a fluorescent screen (scattering patterns) of the reflected protons under the surface-channeling conditions are measured. Normalized specular intensity of the protons oscillates, and the results of computer simulations show that the period of the intensity oscillation agrees with the period of layer-by-layer desorption. The measured period of the oscillation is comparable to the simulated one, i.e., the period of the desorption, however, the measured amplitude of the oscillation is weak. This shows that the layer-by-layer desorption of the experimental surface is observed but is not as remarkable as that of the perfect surface introduced in the simulation.

  1. Intensity distributions of reflected surface channeling protons scattered on surfaces of electron-bombarded alkali halide crystals

    Energy Technology Data Exchange (ETDEWEB)

    Fukazawa, Y., E-mail: yukofu@cc.osaka-kyoiku.ac.jp; Kihara, K.; Iwamoto, K.; Susuki, Y.

    2013-11-15

    We have examined the surface-channeling of 550 keV protons on electron-bombarded KBr(0 0 1) surfaces at grazing incidence. On the surface, electron-stimulated desorption (ESD) resulting from the irradiation of 5 keV electrons changes the surface morphology. In order to investigate the change of the surface morphology, the luminous intensity distributions observed on a fluorescent screen (scattering patterns) of the reflected protons under the surface-channeling conditions are measured. Normalized specular intensity of the protons oscillates, and the results of computer simulations show that the period of the intensity oscillation agrees with the period of layer-by-layer desorption. The measured period of the oscillation is comparable to the simulated one, i.e., the period of the desorption, however, the measured amplitude of the oscillation is weak. This shows that the layer-by-layer desorption of the experimental surface is observed but is not as remarkable as that of the perfect surface introduced in the simulation.

  2. Probing Ultrafast Electron Dynamics at Surfaces Using Soft X-Ray Transient Reflectivity Spectroscopy

    Science.gov (United States)

    Baker, L. Robert; Husek, Jakub; Biswas, Somnath; Cirri, Anthony

    The ability to probe electron dynamics with surface sensitivity on the ultrafast time scale is critical for understanding processes such as charge separation, injection, and surface trapping that mediate efficiency in catalytic and energy conversion materials. Toward this goal, we have developed a high harmonic generation (HHG) light source for femtosecond soft x-ray reflectivity. Using this light source we investigated the ultrafast carrier dynamics at the surface of single crystalline α-Fe2O3, polycrystalline α-Fe2O3, and the mixed metal oxide, CuFeO2. We have recently demonstrated that CuFeO2 in particular is a selective catalyst for photo-electrochemical CO2 reduction to acetate; however, the role of electronic structure and charge carrier dynamics in mediating catalytic selectivity has not been well understood. Soft x-ray reflectivity measurements probe the M2,3, edges of the 3d transition metals, which provide oxidation and spin state resolution with element specificity. In addition to chemical state specificity, these measurements are also surface sensitive, and by independently simulating the contributions of the real and imaginary components of the complex refractive index, we can differentiate between surface and sub-surface contributions to the excited state spectrum. Accordingly, this work demonstrates the ability to probe ultrafast carrier dynamics in catalytic materials with element and chemical state specificity and with surface sensitivity.

  3. The effect of surface texture on total reflection of neutrons and X-rays from modified interfaces

    DEFF Research Database (Denmark)

    Goldar, A.; Roser, S.J.; Hughes, A.

    2002-01-01

    X-ray and neutron scattering from macroscopically rough surfaces and interfaces is considered and a new method of analysis based on the variation of the shape of the total reflection edge in the reflectivity profile is proposed. It was shown that in the limit that the correlation length...... and the height of the surface roughness are larger than the wavelength (at least 100 times bigger) of the incoming beam, the total reflection edge in the reflection profile becomes rounded. This technique allows direct analysis of the variation of the reflectivity pro le in terms of the structure of the surface...

  4. Evaluation of BRDF Archetypes for Representing Surface Reflectance Anisotropy Using MODIS BRDF Data

    Directory of Open Access Journals (Sweden)

    Hu Zhang

    2015-06-01

    Full Text Available Bidirectional reflectance distribution function (BRDF archetypes extracted from the Moderate Resolution Imaging Spectroradiometer (MODIS BRDF/Albedo product over the global Earth Observing System Land Validation Core Sites can be used to simplify BRDF models. The present study attempts to evaluate the representativeness of BRDF archetypes for surface reflectance anisotropy. Five-year forward-modeled MODIS multi-angular reflectance (MCD-ref and aditional actual MODIS multi-angular observations (MCD-obs in four growing periods in 2008 over three tiles were taken as validation data. First, BRDF archetypes in the principal plane were qualitatively compared with the time-series MODIS BRDF product of randomly sampled pixels. Secondly, BRDF archetypes were used to fit MCD-ref, and the average root-mean-squared errors (RMSEs over each tile were examined for these five years. Finally, both BRDF archetypes and the MODIS BRDF were used to fit MCD-obs, and the histograms of the fit-RMSEs were compared. The consistency of the directional reflectance between the BRDF archetypes and MODIS BRDFs in nadir-view, hotspot and entire viewing hemisphere at 30° and 50° solar geometries were also examined. The results confirm that BRDF archetypes are representative of surface reflectance anisotropy for available snow-free MODIS data.

  5. Correlation characteristics of signals reflected by the wavy surface of ocean in mirror direction

    Science.gov (United States)

    Zhitkovskiy, Y. Y.; Nosov, A. V.; Savelyev, V. V.

    1985-06-01

    An experimental study was carried out to determine the correlation characteristics of pseudonoise signals reflected from a wave-covered surface in the mirror direction. The major measured quantity was the reciprocal correlation coefficient between the transmitted signal and the reflected signal. The transmitter was lowered from a ship on a 150 m cable. The receiver and preamplifier were lowered to the same depth from a buoy which was allowed to drift from the ship to a distance of 100-500 m, the changing distance changing the angle of the beam reflected from the surface of the ocean back down to the hydrophone. The radiator transmitted a pulsed signal with a pseudonoise carrier. The results were interpreted within the framework of ordinary correlation theory by processing several recordings, calculating the sign and ordinary correlation coefficients to determine the variation in sign correlation coefficient as a function of the ordinary correlation coefficient. Graphs of the average variation are presented. It was found that the medium did not distort the signal as it propagated through the water mass (within the limits of experimental accuracy). The correlation coefficient between the transmitted and reflected signals is thus determined entirely by the characteristics of reradiation of the sound by the wavecovered surface.

  6. Aerosol Optical Retrieval and Surface Reflectance from Airborne Remote Sensing Data over Land

    Directory of Open Access Journals (Sweden)

    Cristiana Bassani

    2010-06-01

    Full Text Available Quantitative analysis of atmospheric optical properties and surface reflectance can be performed by applying radiative transfer theory in the Atmosphere-Earth coupled system, for the atmospheric correction of hyperspectral remote sensing data. This paper describes a new physically-based algorithm to retrieve the aerosol optical thickness at 550nm (τ550 and the surface reflectance (ρ from airborne acquired data in the atmospheric window of the Visible and Near-Infrared (VNIR range. The algorithm is realized in two modules. Module A retrieves τ550 with a minimization algorithm, then Module B retrieves the surface reflectance ρ for each pixel of the image. The method was tested on five remote sensing images acquired by an airborne sensor under different geometric conditions to evaluate the reliability of the method. The results, τ550 and ρ, retrieved from each image were validated with field data contemporaneously acquired by a sun-sky radiometer and a spectroradiometer, respectively. Good correlation index, r, and low root mean square deviations, RMSD, were obtained for the τ550 retrieved by Module A (r2 = 0.75, RMSD = 0.08 and the ρ retrieved by Module B (r2 ≤ 0.9, RMSD ≤ 0.003. Overall, the results are encouraging, indicating that the method is reliable for optical atmospheric studies and the atmospheric correction of airborne hyperspectral images. The method does not require additional at-ground measurements about at-ground reflectance of the reference pixel and aerosol optical thickness.

  7. Distribution, Source, and Ecological Risk Assessment of Polycyclic Aromatic Hydrocarbons in Surface Sediment of Liaodong Bay, Northeast China

    Science.gov (United States)

    Xu, Shuang; Tao, Ping; Li, Yuxia; Guo, Qi; Zhang, Yan; Wang, Man; Jia, Hongliang; Shao, Mihua

    2018-01-01

    Sixteen polycyclic aromatic hydrocarbons (PAHs) were determined in surface sediments from Liaodong Bay, northeast China. The concentration levels of total PAHs (Σ16PAHs) in sediment were 11.0∼249.6 ng·g-1 dry weight (dw), with a mean value of 89.9 ng·g-1 dry weight (dw). From the point of the spatial distribution, high PAHs levels were found in the western areas of Liaodong Bay. In the paper, sources of PAHs were investigated by diagnostic ratios, which indicated that pyrogenic sources were the main sources of PAHs in the sediment of Liaodong Bay. Therefore, selected PAH levels in sediments were compared with Sediments Quality Guidelines (ERM–ERL indexes) for evaluation probable toxic effects on marine organism.

  8. Characterizing the surface heterogeneity of fire effects using multi-temporal reflective wavelength data

    CSIR Research Space (South Africa)

    Roy, DP

    2005-10-10

    Full Text Available of fire effects using multi-temporal reflective wavelength data D. P. Roy a; T. Landmann ba Department of Geography, College Park, and NASA Goddard, Space Flight Center, University of Maryland. Code 614.5 (B32), Greenbelt, MD 20771. USAb CSIR Environmentek... Characterizing the surface heterogeneity of fire effects using multi-temporal reflective wavelength data D. P. ROY*{ and T. LANDMANN{ {Department of Geography, University of Maryland, College Park, and NASA Goddard, Space Flight Center, Code 614.5 (B32...

  9. Distribution of branched GDGTs in surface sediments from the Colville River, Alaska: Implications for the MBT'/CBT paleothermometer in Arctic marine sediments

    Science.gov (United States)

    Hanna, Andrea J. M.; Shanahan, Timothy M.; Allison, Mead A.

    2016-07-01

    Significant climate fluctuations in the Arctic over the recent past, and additional predicted future temperature changes, highlight the need for high-resolution Arctic paleoclimate records. Arctic coastal environments supplied with terrigenous sediment from Arctic rivers have the potential to provide annual to subdecadal resolution records of climate variability over the last few millennia. A potential tool for paleotemperature reconstructions in these marine sediments is the revised methylation index of branched tetraethers (MBT')/cyclization ratio of branched tetraethers (CBT) proxy based on branched glycerol dialkyl glycerol tetraethers (brGDGTs). In this study, we examine the source of brGDGTs in the Colville River, Alaska, and the adjacent Simpson Lagoon and reconstruct temperatures from Simpson Lagoon sediments to evaluate the applicability of this proxy in Arctic estuarine environments. The Colville catchment soils, fluvial sediments, and estuarine sediments contain statistically similar brGDGT distributions, indicating that the brGDGTs throughout the system are soil derived with little alteration from in situ brGDGT production in the river or coastal waters. Temperatures reconstructed from the MBT'/CBT indices for surface samples show good agreement with regional summer (June through September) temperatures, suggesting a seasonal bias in Arctic temperature reconstructions from the Colville system. In addition, we reconstruct paleotemperatures from an estuarine sediment core that spans the last 75 years, revealing an overall warming trend in the twentieth century that is consistent with trends observed in regional instrumental records. These results support the application of this brGDGT-based paleotemperature proxy for subdecadal-scale summer temperature reconstructions in Arctic estuaries containing organic material derived from sediment-laden, episodic rivers.

  10. Origin and migration of trace elements in the surface sediments of Majuro Atoll, Marshall Islands.

    Science.gov (United States)

    Ito, Lisa; Omori, Takayuki; Yoneda, Minoru; Yamaguchi, Toru; Kobayashi, Ryuta; Takahashi, Yoshio

    2018-03-13

    The sediments of Majuro Atoll, Marshall Islands, consist of bioclastic materials, including foraminifera and coral debris. The sedimentary depth profiles of elements showed that various elements including zinc (Zn) and copper (Cu) were enriched in the upper layers of the islands of Majuro Atoll. Carbon-14 dating revealed that the sedimentation of the upper layer was completed before 1670 and 542 cal BP in Laura and Calalen, respectively. The enriched elements could be categorized by their origins: (a) terrestrial elements transported as dust (aluminum (Al) and rare earth elements (REEs)); (b) anthropogenic elements (Zn and Cu); and (c) elements supplied by seabirds (phosphorus (P)). From the results of the total amount of Al supplied to sediments for ca. 2000 years, Al in Majuro Atoll was suggested to be airborne origin. The enrichment factors of the elements normalized to Al concentration of continental crust showed that REEs were also transported as dust, while Zn and Cu were mainly of anthropogenic origin. The speciation analysis by X-ray absorption near-edge structure (XANES) showed the presence of Zn-Cu alloys originated from industrial products. It was also revealed that Zn was enriched in the surface due to anthropogenic emission after urbanization on Majuro Atoll and fixed by carbonate and phosphate at the upper layer, which inhibits migration of Zn into the deeper layer and its release to the groundwater and costal water. Hence, the fixation of heavy metals at the surface prevents their exposure to aquatic organisms and residents via fresh groundwater in the island. Copyright © 2018 Elsevier Ltd. All rights reserved.

  11. Dynamics of organic and inorganic carbon in surface sediments of the Yellow River Estuary

    Science.gov (United States)

    Yu, Z.; Wang, X.; Liu, X.; Zhang, E.; Hang, F.

    2017-12-01

    Estuarine sediment is an important carbon reservoir thus may play an important role in the global carbon cycle. However, little is known on the dynamics of organic carbon (OC) and inorganic carbon (IC) in the surface sediment of the Yellow River Estuary, a large estuary in northern China. In this study, we applied element analyses and isotopic approach to study spatial distribution and sources of OC and IC in the Yellow River Estuary. We found that TIC concentration (6.3-20.1 g kg-1) was much higher than TOC (0.2-4.4 g kg-1) in the surface sediment. There showed a large spatial variability in TOC and TIC and their stable isotopes. Both TOC and TIC were higher to the north (2.6 and 14.5 g kg-1) than to the south (1.6 and 12.2 g kg-1), except in the southern bay where TOC and TIC reached 2.7 and 15.4 g kg-1, respectively. Generally, TOC and TIC in our study area was mainly autochthonous. The lower TOC values in the south section were due to relatively higher kinetic energy level whereas the higher values in the bay was attributable to terrigenous matters accumulation and lower kinetic energy level. However, the southern bay revealed the most negative δ13Corg and δ13Ccarb, suggesting that there might exist some transfer of OC to IC in the section. Our study points out that the dynamics of sedimentary carbon in the Yellow River Estuary is influenced by multiple and complex processes, and highlights the importance of carbonate in carbon sequstration.

  12. Lead isotopes in marine surface sediments reveal historical use of leaded fuel.

    Science.gov (United States)

    Larsen, Martin M; Blusztajn, Jerzy S; Andersen, Ole; Dahllöf, Ingela

    2012-11-01

    Analyses of lead (Pb) isotopes have been performed in terrestrial and fresh water environments to estimate historical uses of leaded fuel, but so far this method has not been employed in studies of world-wide marine surface sediments. We analyzed Pb and its isotopes in 23 surface sediments from four continents collected during the Galathea 3 expedition in 2006-2007. To enhance the anthropogenic signal, a partial digestion using nitric acid was performed. The concentrations of Pb, Th, U and Al were determined with an ICP-Quadrupole MS, and Pb-isotope ratios with an ICP-multi-collector MS. The samples could be divided into three groups: Harbor areas in larger cities with concentrations of 150 to 265 mg kg(-1) dry weight, smaller towns with concentrations between 20 and 40 mg kg(-1) dry weight, and remotely located sites with concentrations below 15 mg kg(-1) dry weight. Pb-isotope ratios were compared to literature values for gasoline and local or geological background values, and the contribution of leaded-gasoline to total concentrations was calculated for contaminated sites using both a one-dimensional and a novel two-dimensional (vector) method. The North American sites had Pb-isotope ratios corresponding to the US leaded gasoline, with 24-88% of the Pb from leaded gasoline. Samples from Oceania showed Pb-isotope ratios corresponding to Australian gasoline, with 60% attributed to leaded gasoline in Sydney and 21% in Christchurch. Outside Cape Town, 15 to 46% of Pb in sediments was from leaded gasoline.

  13. Organic-walled dinoflagellate cysts in western equatorial Atlantic surface sediments: distributions and their relation to environment.

    Science.gov (United States)

    Vink; Zonneveld; Willems

    2000-11-01

    In contrast to the wide range of studies carried out in temperate and high-latitude oceanic regions, only a few studies have focused on recent and Holocene organic-walled dinoflagellate cyst assemblages from the tropics. This information is, however, essential for fully understanding the ability of species to adapt to different oceanographic regimes, and ultimately their potential application to local and regional palaeoenvironmental and palaeoceanographic reconstructions. Surface sediment samples of the western equatorial Atlantic Ocean north of Brazil, an area greatly influenced by Amazon River discharge waters, were therefore analysed in detail for their organic-walled dinoflagellate cyst content. A diverse association of 43 taxa was identified, and large differences in cyst distribution were observed. The cyst thanatocoenosis in bottom sediments reflects the seasonal advection of Amazon River discharge water through the Guyana Current and the North Equatorial Countercurrent well into the North Atlantic. To establish potential links between cyst distribution and the environmental conditions of the upper water column, distribution patterns were compared with mean temperature, salinity, density and stratification gradients within the upper water column (0-100m) over different times of the year, using correspondence analysis and canonical correspondence analysis. The analyses show that differences in these parameters only play a subordinate role in determining species distribution. Instead, nutrient availability, or related factors, dominates the distribution pattern. The only possible indicators of slightly reduced salinities are Trinovantedinium applanatum and Lingulodinium machaerophorum. Four assemblage groups of cyst taxa with similar environmental affinities related to specific water masses/currents can be distinguished and have potential for palaeoenvironmental reconstruction.

  14. Heavy Metal Contamination in the Surface Sediments of Representative Limnetic Ecosystems in Eastern China

    Science.gov (United States)

    Tang, Wenzhong; Shan, Baoqing; Zhang, Hong; Zhang, Wenqiang; Zhao, Yu; Ding, Yuekui; Rong, Nan; Zhu, Xiaolei

    2014-11-01

    A comprehensive analysis of heavy metal pollution was conducted in the representative limnetic ecosystems of eastern China, which are subject to rapid economic development and population growth. The results demonstrated that the average contents with standard deviations of Cd, Cr, Cu, Ni, Pb and Zn in the surface sediments were 0.925 +/- 0.936, 142 +/- 46.8, 54.7 +/- 29.1, 60.5 +/- 21.6, 61.9 +/- 36.0 and 192 +/- 120 mg/kg dry wt., respectively, and that higher values were mainly observed in the southern portion of the study area, especially in the basins of Southeast Coastal Rivers (SCRB) and the Zhu River (ZRB). The six heavy metals in the surface sediments all had anthropogenic origins. In addition, the limnetic ecosystems, especially in the southern portion of the study area were found to be polluted by heavy metals, especially Cd. Overall, two hotspots of heavy metal pollution in the limnetic ecosystems of eastern China were found, one that consisted of the heavy pollution regions, SCRB and ZRB, and another composed of Cd pollution. These results indicate that heavy metal contamination, especially Cd, should be taken into account during development of management strategies to protect the aquatic environment in the limnetic ecosystems of eastern China, especially in the two aforementioned basins.

  15. Hydrocarbons in surface sediments from the Sfax coastal zone, (Tunisia) Mediterranean Sea.

    Science.gov (United States)

    Zaghden, Hatem; Kallel, Monem; Louati, Afifa; Elleuch, Boubaker; Oudot, Jean; Saliot, Alain

    2005-11-01

    The Semi-enclosed Mediterranean Sea records various signals of high anthropic pressures from surrounding countries and the industrialized European countries. This is particularly true for oil pollution. Although accounting for 1% of the world's ocean surface, it receives about 25% of the petroleum inputs to the ocean. To achieve a global budget we need to collect information from different parts of the Mediterranean. Particularly, we focus in this paper on the Southern Mediterranean, where data are presently very scarce. In this context, the University of Sfax has undertaken an estimation of hydrocarbon pollution along the coasts of Sfax and Gabès Gulf. Non-aromatic hydrocarbons were analysed in 8 surface sediments by FT/IR and GC/MS. Non-aromatic hydrocarbon concentrations vary in the range 310-1406 microg g(-1) sediments dry weight, which is high, compared to other Mediterranean sites. GC/MS data indicate a large group of unresolved compounds suggesting a petroleum contamination, confirmed by the identification of hopanes with predominant C29 and C30alpha,beta compounds and steranes with predominance of C27 over C28) and C29 compounds.

  16. Lipid composition of water and surface sediments in Takapoto atoll lagoon (French Polynesia)

    Science.gov (United States)

    Saliot, A.; Bouloubassi, I.; Lorre-Boireau, A.; Trichet, J.; Poupet, P.; Charpy, L.

    1994-11-01

    Dissolved, particulate and sedimentary lipid compounds were analyzed in samples collected in May 1988 at three sites in the lagoon of the closed atoll of Takapoto (Tuamotu archipelago, French Polynesia). The study provides background information dealing with water quality and the nature and concentration of lipids. Non-aromatic hydrocarbons and fatty acids were isolated from lipids and analyzed by gas chromatography/mass spectrometry. Non-aromatic hydrocarbon concentrations did not exceed 1000 ng l-1 in water, and 2300 ng g-1 in surface sediments and are among the lowest encountered in pristine marine environments. No noticeable petroleum pollution was evidenced in the lagoon. Nevertheless, traces of petroleum-derived compounds were detected at the central site for both surface and deep water. Total fatty acid concentrations varied in the range 6.3 14.4 μg l-1 for the particulate phase and in the range 0.5 3.2 μg l-1 for the dissolved phase. The molecular fingerprints of fatty acids and hydrocarbons evidenced a predominant algal, and to a lesser extent microbial, origin of the organic matter present in water and sediments. Mono- and polyunsaturated fatty acids, which are essential components for animal metabolism, were identified in noticeable amounts in suspended matter (1.8 4.6 μg l-1), and at highly variable levels in the dissolved phase (0.08 1.21 μg l-1).

  17. 226Ra, 228Ra and 228Ra/226Ra in surface marine sediment of Malaysia

    International Nuclear Information System (INIS)

    Mei-Wo Yii; Zal Uyun Wan-Mahmood

    2013-01-01

    Surface sediment samples were collected at the West (east coast and west coast of Peninsular Malaysia) and East (Sabah and Sarawak) Malaysia in several expeditions within August 2003 until June 2008 for determining the level of natural radium isotopes. Activity concentrations of 226 Ra and 228 Ra in surface marine sediment at 176 sampling stations were measured. The activity concentrations of both radionuclides in Malaysia (East and West Malaysia) display varied with the range from 9 to 158 Bq/kg dry wt. and 13 to 104 Bq/kg dry wt., respectively. Meanwhile, the ratio distributions of 228 Ra/ 226 Ra were ranged from 0.62 to 3.75. This indicated that the ratios were slightly high at west coast of Peninsular Malaysia compared to other regions (east coast of Peninsular Malaysia, Sabah and Sarawak). The variation of activity concentrations of 226 Ra and 228 Ra and its ratios were also supported by the statistical analyses of one-way ANOVA and t test at 95 % confidence level, whereby there were proved that the measured values were different between the regions. These different were strictly related to their half-life, potential input sources (included their parents, 238 U and 232 Th), parent's characteristic, the geological setting/formation of the study area, environment origin and behavior. (author)

  18. Studies of float glass surfaces by neutron and x-ray reflection

    International Nuclear Information System (INIS)

    Dalgliesh, R.

    2001-09-01

    The surface of glass and glass coatings have been studied using x-ray and neutron scattering techniques. In particular, the effect of aqueous solutions and humid atmospheres on both the fire polished and the tin rich side of float glass have been investigated using neutron and x-ray reflection. Isotopic substitution has enabled the number density of water molecules within the float glass surface to be monitored with respect to immersion time, temperature and impurity content. A thin gel-like water-rich layer of thickness ∼30A is observed at the surface accompanied by a more deeply penetrating layer which increases in depth with time reaching ∼500A after 6 months. The rate of water ingression is higher than predicted from previous work carried out at elevated temperatures. Small decreases in the depth of penetration have been observed for glass containing alumina and tin. Water penetration into thin films made by a sol-gel process have also been studied. The hydrophobicity of these films had been varied by the addition of fluoroalkylsilane. Neutron and X-ray reflection revealed that water entered the highly hydrophobic films readily from the vapour phase. This suggests a method of film destabilisation by which water enters the film and freezes, causing the film to crack. Changes in fluoroalkylsilane content and annealing have little effect on the penetration of water into the coatings. Etched float glass surfaces have been used as a system for testing the applicability of current off-specular scattering models. A rich surface structure has been found which results in reflection effects that cannot be explained by these models. Model systems have also been developed in an attempt to combine x-ray fluorescence techniques with reflectivity. (author)

  19. Distribution, enrichment and sources of thallium in the surface sediments of the southwestern coastal Laizhou Bay, Bohai Sea.

    Science.gov (United States)

    Zhuang, Wen; Gao, Xuelu

    2015-07-15

    The concentrations of thallium (Tl) in the surface sediments of the southwestern coastal Laizhou Bay and the rivers it connects were determined. In riverine sediments, the Tl concentrations ranged from 0.34 to 0.76 μg g(-1) in summer; in autumn, the corresponding data were 0.35-1.08 μg g(-1). In marine sediments, the Tl concentrations ranged from 0.36 to 0.58 μg g(-1) in summer; and from 0.30 to 0.56 μg g(-1) in autumn. The grain size, Al and Fe oxides were major factors affecting Tl distribution. Tl in the surface sediments of the studied area was mainly from the natural input with the non-natural input as a subsidiary source. The low concentrations of Tl made it hard to cause potential negative environmental effects in this area. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. Bi-directional Reflectance of Icy Surface Analogs: A Dual Approach

    Science.gov (United States)

    Quinones, Juan Manuel; Vides, Christina; Nelson, Robert M.; Boryta, Mark; Mannat, Ken s.

    2018-01-01

    Bi-directional reflectance measurements of analogs for planetary regolith have provided insight into the surface properties of planetary satellites and small bodies. Because Aluminum Oxide (Al2O3) and water ice share a similar hexagonal crystalline structure, the former has been used in laboratory experiments to simulate the regolith of both icy and dusty planetary bodies. By measuring various sizes of well sorted size fractions of Al2O3, the reflectance phase curve and porosity of a planetary regolith can be determined. We have designed an experiment to test the laboratory measurements produced by Nelson et al. (2000). Additionally, we made reflectance measurements for other alkali-halide compounds that could be used for applications beyond astronomy and planetary science.In order to provide an independent check on the Nelson et al. data, we designed an instrument with a different configuration. While both instruments take bidirectional reflectance measurements, our instrument, the Rigid Photometric Goniometer (RPG), is fixed at a phase angle of 5° and detects the scattered light with a photomultiplier tube (PMT). The PMT current is then measured with an electrometer. Following the example of Nelson et al., we measured the bidirectional reflectance of Al2O3 particulate size fractions between 0.1reflectance measurements for NaCl and KCl of sizes from 20reflectance applications beyond astronomy and planetary science. The objective of the experiment was to determine the particle size that provided optimal, or maximum, reflectance for each compound. Our conclusions bring confirmation and clarity to photometric sciences.

  1. Tracing the origin of Pb using stable Pb isotopes in surface sediments along the Korean Yellow Sea coast

    Science.gov (United States)

    Park, Jong-Kyu; Choi, Man-Sik; Song, Yunho; Lim, Dhong-Il

    2017-06-01

    To investigate the factors controlling lead (Pb) concentration and identify the sources of Pb in Yellow Sea sediments along the Korean coast, the concentration of Pb and Pb isotopes in 87 surface and 6 core sediment samples were analyzed. The 1 M HCl leached Pb concentrations had a similar geographic distribution to those of fine-grained sediments, while the distribution of residual Pb concentrations resembled that of coarse-grained sediments. Leached Pb was presumed to be associated with manganese (Mn) oxide and iron (Fe) oxy/hydroxide, while residual Pb was associated with potassium (K)-feldspar, based on good linear relationships between the leached Pb and the Fe/Mn concentrations, and the residual Pb and K concentrations. Based on a ratio-ratio plot with three isotopes (207Pb/206Pb and 208Pb/206Pb) and the geographic location of each sediment, sediments were categorized into two groups of samples as group1 and group2. Group 1 sediments, which were distributed in Gyeonggi Bay and offshore (north of 36.5°N), were determined to be a mixture of anthropogenic and natural Pb originating from the Han River, based on a 208Pb/206Pb against a Cs/Pbleached mixing plot of core and surface sediments. Group 2 sediments, which were distributed in the south of 36.5°N, also showed a two endmembers mixing relationship between materials from the Geum River and offshore materials, which had very different Pb concentrations and isotope ratios. Based on the isotopes and their concentrations in core and surface sediments, this mixing relationship was interpreted as materials from two geographically different origins being mixed, rather than anthropogenic or natural mixing of materials with the same origin. Therefore, the relative percentage of materials supplied from the Geum River was calculated using a two endmembers mixing model and estimated to be as much as about 50% at 35°N. The spatial distribution of materials derived from the Geum River represented that of fine

  2. Biomimetic approaches to create anti-reflection glass surfaces for solar cells using self-organizing techniques

    Energy Technology Data Exchange (ETDEWEB)

    Achtelik, J.; Sievers, W. [University of Paderborn, Department of Physics, 33098 Paderborn (Germany); Center of Optoelectronics and Photonics Paderborn CeOPP, 33098 Paderborn (Germany); Lindner, J.K.N., E-mail: lindner@physik.uni-paderborn.de [University of Paderborn, Department of Physics, 33098 Paderborn (Germany); Center of Optoelectronics and Photonics Paderborn CeOPP, 33098 Paderborn (Germany)

    2013-05-15

    Highlights: ► Nanostructured glass surfaces with theoretically near-to-zero reflectivity in the UVNIR region. ► Simple fabrication process using self-organization during reactive ion etching proposed. ► Prediction of optical reflectivity from AFM measured surface morphology. -- Abstract: Aiming to diminish the reflection losses of glass covered light harvesting devices, the optical reflectivity of nanostructured glass surfaces is studied theoretically and experimentally. The work is inspired by the nanoscale roughness of insect eyes, which is tried to be replicated on a technical glass surface. To this end, the reflectivity of glass surfaces with topographies represented by linear, parabolic and Fermi-shaped glass/air fill factor profiles is calculated for normal incidence. It is shown that using the latter ones, an almost complete suppression of reflections can be achieved. A simple, self-organization technique to create such Fermi-shaped filling factor profiles in glass experimentally is also presented.

  3. Accumulation and distribution of heavy metals in surface sediments of a semienclosed basin in the southeastern Mediterranean Sea, Egypt

    Directory of Open Access Journals (Sweden)

    M.A.M. ABDALLAH

    2007-06-01

    Full Text Available The distribution, enrichment and accumulation of heavy metals in the surficial sediments of the Alexandria City Eastern Harbour (Mediterranean coast of Egypt were investigated. Surface sediments (in the <63mm fraction collected from 12 sites representing the entire area of the harbour, were analyzed by AAS for Cd, Cu, Zn, Cr, Pb and Al. Metal contents were compared with literature data to assess the pollution status of sediments. Enrichment factors (EFs and the geoaccumulation Index (Igeo were calculated as a criterion of possible contamination.

  4. Distribution and fractionation of heavy metals in the surface sediments of the Ganges-Brahmaputra-Meghna river system in the Bengal basin

    Energy Technology Data Exchange (ETDEWEB)

    Datta, D.K. [Khulna Univ. (Bangladesh). Dept. of Environmental Sciences; Subramanian, V. [Jawaharlal Nehru Univ., New Delhi (India). School of Environmental Sciences

    1998-11-01

    The lower Ganges-Brahmaputra-Meghna (G-B-M) drainage basin occupies the total Bengal Basin, which is one of the unique basins of the world because of its location and size, density of population, and catastrophic deposition of sediments. The increased heavy metal concentration in the 63 m fraction of surface sediments shows similarity among major segments of the G-B-M system in the basin, which reflects the homogenization of lithologic and chemical diversity of the greater denudation regime by the river processes. The differences in heavy metal concentration in the lower G-B-M system with that of its upper and middle counterpart is mainly related to the contrast between Himalayan rivers and the other major South Asian rivers, and may be due to the geological differences of their denudation regime. Heavy metals in the Lower G-B-M system have an affinity towards the clay fraction of the sediments. The correlation matrix of heavy metals in the lower Brahmaputra and Meghna suggests the importance of Fe-Mn oxyhydroxides in their accumulations. Iron, Ti and Mn are higher in the Meghna main channel, Zn is higher in the Meghna tributaries, and Cr is higher in both the Brahmaputra and Meghna compared to the value for standard shale. The enrichment factor is {<=}1 for most of the metals except Mn which is relatively higher in the Meghna and lower Ganges main channels. The geoaccumulation index (I{sub geo}) for most of the heavy metals lies below grade zero, suggesting unpolluted sediment quality. The lower Ganges system shows relatively higher concentration in the nondetrital fraction of heavy metals, probably due to the presence of petroleum refinery, industrial and mining effluents, and agricultural runoff in the drainage basin. The relative uniformity in concentration of heavy metals in vertical profiles may be due to the uniformity in sediment grain size and catastrophic deposition of sediments, where the time period represented by the vertical sediment column is not

  5. Transmission/reflection behaviors of surface plasmons at an interface between two plasmonic systems

    Science.gov (United States)

    Guan, Fuxin; Sun, Shulin; Ma, Shaojie; Fang, Zhening; Zhu, Baocheng; Li, Xin; He, Qiong; Xiao, Shiyi; Zhou, Lei

    2018-03-01

    Although surface plasmon polaritons (SPPs) have been intensively studied in past years, the transmission/reflection properties of SPPs at an interface between two plasmonic media are still not fully understood. In this article, we employ a mode expansion method (MEM) to systematically study such a problem based on a model system jointing two superlattices, each consisting of a periodic stacking of dielectric and plasmonic slabs with different material properties. Such a generic model can represent two widely used plasmonic structures (i.e. interfaces between two single dielectric/metal systems or between two metal–insulator–metal waveguides) under certain conditions. Our MEM calculations, in excellent agreement with full-wave simulations, uncover the rich physics behind the SPP reflections at generic plasmonic interfaces. In particular, we successfully derive from the MEM several analytical formulas that can quantitatively describe the SPP reflections at different plasmonic interfaces, and show that our formulas exhibit wider applicable regions than previously proposed empirical ones.

  6. Antarctic Surface Reflectivity Measurements from the ANITA-3 and HiCal-1 Experiments

    Science.gov (United States)

    Gorham, P. W.; Allison, P.; Banerjee, O.; Beatty, J. J.; Belov, K.; Besson, D. Z.; Binns, W. R.; Bugaev, V.; Cao, P.; Chen, C.; Chen, P.; Clem, J. M.; Connolly, A.; Dailey, B.; Dasgupta, P.; Deaconu, C.; Cremonesi, L.; Dowkontt, P. F.; Fox, B. D.; Gordon, J.; Hill, B.; Hupe, R.; Israel, M. H.; Jain, P.; Kowalski, J.; Lam, J.; Learned, J. G.; Liewer, K. M.; Liu, T. C.; Matsuno, S.; Miki, C.; Mottram, M.; Mulrey, K.; Nam, J.; Nichol, R. J.; Novikov, A.; Oberla, E.; Prohira, S.; Rauch, B. F.; Romero-Wolf, A.; Rotter, B.; Ratzlaff, K.; Russell, J.; Saltzberg, D.; Seckel, D.; Schoorlemmer, H.; Stafford, S.; Stockham, J.; Stockham, M.; Strutt, B.; Tatem, K.; Varner, G. S.; Vieregg, A. G.; Wissel, S. A.; Wu, F.; Young, R.

    The primary science goal of the NASA-sponsored ANITA project is measurement of ultra-high energy neutrinos and cosmic rays, observed via radio-frequency signals resulting from a neutrino or cosmic ray interaction with terrestrial matter (e.g. atmospheric or ice molecules). Accurate inference of the energies of these cosmic rays requires understanding the transmission/reflection of radio wave signals across the ice-air boundary. Satellite-based measurements of Antarctic surface reflectivity, using a co-located transmitter and receiver, have been performed more-or-less continuously for the last few decades. Our comparison of four different reflectivity surveys, at frequencies ranging from 2 to 45GHz and at near-normal incidence, yield generally consistent maps of high versus low reflectivity, as a function of location, across Antarctica. Using the Sun as an RF source, and the ANITA-3 balloon borne radio-frequency antenna array as the RF receiver, we have also measured the surface reflectivity over the interval 200-1000MHz, at elevation angles of 12-30∘. Consistent with our previous measurement using ANITA-2, we find good agreement, within systematic errors (dominated by antenna beam width uncertainties) and across Antarctica, with the expected reflectivity as prescribed by the Fresnel equations. To probe low incidence angles, inaccessible to the Antarctic Solar technique and not probed by previous satellite surveys, a novel experimental approach (“HiCal-1”) was devised. Unlike previous measurements, HiCal-ANITA constitute a bi-static transmitter-receiver pair separated by hundreds of kilometers. Data taken with HiCal, between 200 and 600MHz shows a significant departure from the Fresnel equations, constant with frequency over that band, with the deficit increasing with obliquity of incidence, which we attribute to the combined effects of possible surface roughness, surface grain effects, radar clutter and/or shadowing of the reflection zone due to Earth

  7. Measuring and modeling near-surface reflected and emitted radiation fluxes at the FIFE site

    Science.gov (United States)

    Blad, Blaine L.; Walter-Shea, Elizabeth A.; Starks, Patrick J.; Vining, Roel C.; Hays, Cynthia J.; Mesarch, Mark A.

    1990-01-01

    Information is presented pertaining to the measurement and estimation of reflected and emitted components of the radiation balance. Information is included about reflectance and transmittance of solar radiation from and through the leaves of some grass and forb prairie species, bidirectional reflectance from a prairie canopy is discussed and measured and estimated fluxes are described of incoming and outgoing longwave and shortwave radiation. Results of the study showed only very small differences in reflectances and transmittances for the adaxial and abaxial surfaces of grass species in the visible and infrared wavebands, but some differences in the infrared wavebands were noted for the forbs. Reflectance from the prairie canopy changed as a function of solar and view zenith angles in the solar principal plane with definite asymmetry about nadir. The surface temperature of prairie canopies was found to vary by as much as 5 C depending on view zenith and azimuth position and on the solar azimuth. Aerodynamic temperature calculated from measured sensible heat fluxes ranged from 0 to 3 C higher than nadir-viewed temperatures. Models were developed to estimate incoming and reflected shortwave radiation from data collected with a Barnes Modular Multiband Radiometer. Several algorithms for estimating incoming longwave radiation were evaluated and compared to actual measures of that parameter. Net radiation was calculated using the estimated components of the shortwave radiation streams, determined from the algorithms developed, and from the longwave radiation streams provided by the Brunt, modified Deacon, and the Stefan-Boltzmann models. Estimates of net radiation were compared to measured values and found to be within the measurement error of the net radiometers used in the study.

  8. Energy loss of MeV protons specularly reflected from metal surfaces

    International Nuclear Information System (INIS)

    Juaristi, J.I.; Garcia de Abajo, F.J.; Echenique, P.M.

    1996-01-01

    A parameter-free model is presented to study the energy loss of fast protons specularly reflected from metal surfaces. The contributions to the energy loss from excitation of valence-band electrons and ionization of localized target-atom electronic states are calculated separately. The former is calculated from the induced surface wake potential using linear response theory and the specular-reflection model, while the latter is calculated in the first Born approximation. The results obtained are in good agreement with available experimental data. However, the experimental qualitative trend of the energy loss as a function of the angle of incidence is obtained when the valence-band electron model is replaced by localized target atom electron states, though with a worse quantitative agreement. copyright 1996 The American Physical Society

  9. Surface plasmon resonance sensors based on uniform-waist tapered fibers in a reflective configuration

    Science.gov (United States)

    Esteban, Óscar; Díaz-Herrera, Natalia; Navarrete, María-Cruz; González-Cano, Agustín

    2006-10-01

    We present a configuration for surface plasmon resonance sensors based on uniform-waist tapered optical fibers and reflective elements. Once the fiber is tapered fulfilling the adiabatic criterion, a multilayer including a metallic medium is asymmetrically deposited on the uniform waist of the fiber. This feature provides the resonant excitation of multiple surface plasma waves. In addition, a mirror is produced at the fiber tip by a chemical Tollens reaction. In this way, the sensor operates in a reflective mode, more convenient for dip probes. When these sensors are spectrally interrogated, a high sensitivity of 10-4 refractive index units per nanometer is attained. These devices can be advantageously used for any kind of chemical sensing and biosensing.

  10. Glazed ceramic roof tiles: influence of surface features in the solar reflectance index

    International Nuclear Information System (INIS)

    Bortoli, Leitcia Silva de; Stapait, Camila Cristina; Marinoski, Deivis Luis; Fredel, Marcio Celso; Schabbach, Luciana M.

    2016-01-01

    In this study the influence of surface features of ceramic roof tiles in the solar reflectance index were evaluated. Two glazed ceramic roof tiles (type stoneware) with the same color (ivory) but with different appearance (matte and brilliant) were the focus of the analysis. The Solar Reflectance Index (SRI) of the roofs tiles were determined by the solar reflectance values (UV-VIS-NIR) and emittance, measured in laboratory. The samples showed SRI> 39 in accordance with LEED certification criteria (Leadership in Energy and Environmental Design), contributing to minimizing the Heat Island Effects. Although the matte roof tile shows a slightly higher SRI value (82) than the brilliant one (78), the results for the variables that composes the SRI value (reflectance and emittance) were very similar. Analysis of XRD, SEM and EDS performed on the surfaces of the two roofs indicated for the matte glaze the presence of microcrystals (with barium and zinc) that can contribute to the slightly highest value of SRI. The roughness (optical interferometer white light) and the brightness (brightness meter) of the samples were also measured. (author)

  11. Absorption and reflectivity of the lithium niobate surface masked with a graphene layer

    Directory of Open Access Journals (Sweden)

    O. Salas

    2017-01-01

    Full Text Available We performed simulations of the interaction of a graphene layer with the surface of lithium niobate utilizing density functional theory and molecular dynamics at 300K and atmospheric pressure. We found that the graphene layer is physisorbed on the lithium niobate surface with an adsorption energy of -0.8205 eV/(carbon-atom. Subsequently, the energy band structure, the optical absorption and reflectivity of the new system were calculated. We found important changes in these physical properties with respect to the corresponding ones of a graphene layer and of a lithium niobate crystal.

  12. Transitioning MODIS to VIIRS observations for Land: Surface Reflectance results, Status and Long-term Prospective

    Science.gov (United States)

    Vermote, E.

    2015-12-01

    Surface reflectance is one of the key products from VIIRS and as with MODIS, is used in developing several higher-order land products. The VIIRS Surface Reflectance (SR) IP is based on the heritage MODIS Collection 5 product (Vermote et al. 2002). The quality and character of surface reflectance depends on the accuracy of the VIIRS Cloud Mask (VCM) and aerosol algorithms and of course on the adequate calibration of the sensor. Early evaluation of the VIIRS SR product in the context of the maturity of the operational processing system known as the Interface Data Processing System (IDPS), has been a major focus of work to-date, but is now evolving into the development of a VIIRS suite of Climate Data Records produced by the NASA Land Science Investigator Processing System (SIPS). We will present the calibration performance and the role of the surface reflectance in calibration monitoring, the performance of the cloud mask with a focus on vegetation monitoring (no snow conditions), the performance of the aerosol input used in the atmospheric correction with quantitative results of the performance of the SR product over AERONET sites. Based on those elements and further assessment, we will address the readiness of the SR product for the production of higher-order land products such as Vegetation Indices, Albedo and LAI/FPAR, the its application to agricultural monitoring and in particular the integration of VIIRS data into the global agricultural monitoring (GLAM) system developed at UMd. Finally from the lessons learned, we will articulate a set of critical recommendations to ensure consistency and continuity of the JPSS mission with the MODIS data record.

  13. Combined analysis of surface reflection imaging and vertical seismic profiling at Yucca Mountain, Nevada

    International Nuclear Information System (INIS)

    Daley, T.M.; Majer, E.L.; Karageorgi, E.

    1994-08-01

    This report presents results from surface and borehole seismic profiling performed by the Lawrence Berkeley Laboratory (LBL) on Yucca Mountain. This work was performed as part of the site characterization effort for the potential high-level nuclear waste repository. Their objective was to provide seismic imaging from the near surface (200 to 300 ft. depth) to the repository horizon and below, if possible. Among the issues addressed by this seismic imaging work are location and depth of fracturing and faulting, geologic identification of reflecting horizons, and spatial continuity of reflecting horizons. The authors believe their results are generally positive, with tome specific successes. This was the first attempt at this scale using modem seismic imaging techniques to determine geologic features on Yucca Mountain. The principle purpose of this report is to present the interpretation of the seismic reflection section in a geologic context. Three surface reflection profiles were acquired and processed as part of this study. Because of environmental concerns, all three lines were on preexisting roads. Line 1 crossed the mapped surface trace of the Ghost Dance fault and it was intended to study the dip and depth extent of the fault system. Line 2 was acquired along Drill Hole wash and was intended to help the ESF north ramp design activities. Line 3 was acquired along Yucca Crest and was designed to image geologic horizons which were thought to be less faulted along the ridge. Unfortunately, line 3 proved to have poor data quality, in part because of winds, poor field conditions and limited time. Their processing and interpretation efforts were focused on lines 1 and 2 and their associated VSP studies

  14. Fluctuations of noiselike signals reflected from a rough surface at the output of a correlation receiver

    Science.gov (United States)

    Gulin, E. P.

    2005-11-01

    The frequency and time averaging of the fluctuations that occur in the cross-correlation function of a radiated noiselike acoustic signal with the signal received after its reflection from a rough water surface is considered. The variance and temporal correlation function are calculated for the output effect of a correlation receiver for different ratios between the averaging time and the time correlation interval of fluctuations, the band width of the radiated signal, and the frequency correlation interval of the transfer function fluctuations.

  15. Observations of discrete energy loss effects in spectra of positrons reflected from solid surfaces

    International Nuclear Information System (INIS)

    Dale, J.M.; Hulett, L.D.; Pendyala, S.

    1980-01-01

    Surfaces of tungsten and silicon have been bombarded with monoenergetic beams of positrons and electrons. Spectra of reflected particles show energy loss tails with discrete peaks at kinetic energies about 15 eV lower than that of the elastic peaks. In the higher energy loss range for tungsten, positron spectra show fine structure that is not apparent in the electron spectra. This suggests that the positrons are losing energy through mechanisms different from that of the electrons

  16. Decadal changes of surface elevation over permafrost area estimated using reflected GPS signals

    Science.gov (United States)

    Liu, Lin; Larson, Kristine M.

    2018-02-01

    Conventional benchmark-based survey and Global Positioning System (GPS) have been used to measure surface elevation changes over permafrost areas, usually once or a few times a year. Here we use reflected GPS signals to measure temporal changes of ground surface elevation due to dynamics of the active layer and near-surface permafrost. Applying the GPS interferometric reflectometry technique to the multipath signal-to-noise ratio data collected by a continuously operating GPS receiver mounted deep in permafrost in Barrow, Alaska, we can retrieve the vertical distance between the antenna and reflecting surface. Using this unique kind of observables, we obtain daily changes of surface elevation during July and August from 2004 to 2015. Our results show distinct temporal variations at three timescales: regular thaw settlement within each summer, strong interannual variability that is characterized by a sub-decadal subsidence trend followed by a brief uplift trend, and a secular subsidence trend of 0.26 ± 0.02 cm year-1 during 2004 and 2015. This method provides a new way to fully utilize data from continuously operating GPS sites in cold regions for studying dynamics of the frozen ground consistently and sustainably over a long time.

  17. A Study on Infrared Emissivity Measurement of Material Surface by Reflection Method

    International Nuclear Information System (INIS)

    Kang, Byung Chul; Kim, Sang Myoung; Choi, Joung Yoon; Kim, Gun Ok

    2010-01-01

    Infrared emissivity is one of the most important factors for the temperature measurement by infrared thermography. Although the infrared emissivity of an object can be measured from the ratio of blackbody and the object, at room temperature it is practically difficult to measure the value due to the background effects. Hence, quantitative reflectance of bare steel plate and the surface of coating was measured by FT-IR spectroscopy and emissivity was calculated from this. The emissivity of polished bare steel surface was from 0.06 to 0.10 and the value for the unpolished bare steel can not be achieved because optical characteristics changes of surface roughness induces erroneous results. Emissivity of transparent paint coated steel was from 0.50 to 0.84. Depends on the IR absorption regions, which is a characteristic value of the coating, emissivity changes. This study suggests surface condition of material, thickness, roughness etcetra are important factor for IR optical characteristics. Emissivity measurement by reflection method is useful technique to be applied for metal and it with coating applied on the surface. The range of experimental errors of temperature can be narrowed by the application of infrared thermography from the measured thermal emissivity

  18. Sedimentation and chemical quality of surface waters in the Wind River basin, Wyoming

    Science.gov (United States)

    Colby, B.R.; Hembree, C.H.; Rainwater, F.H.

    1956-01-01

    This report gives results of an investigation by the U. S. Geological Survey of chemical quality of surface waters and sedimentation in the Wind River Basin, Wyo. The sedimentation study was begun in 1946 to determine the quantity of sediment that is transported by the streams in the basin; the probable sources of the sediment; the effect of large irrigation projects on sediment yield, particularly along Fivemile Creek; and the probable specific weight of the sediment when initially deposited in a reservoir. The study of the chemical quality of the water was begun in 1945 to obtain information on the sources, nature, and amounts of dissolved material that is transported by streams and on the suitability of the waters for different uses. Phases of geology and hydrology pertinent to the sedimentation and chemical quality were studied. Results of the investigation through September 30, 1952, and some special studies that were made during the 1953 and 1954 water years are reported. The rocks in the Wind River Basin are granite, schist, and gneiss of Precambrian age and a thick series of sedimentary strata that range in age from Cambrian to Recent. Rocks of Precambrian and Paleozoic age are confined to the mountains, rocks of Mesozoic age crop out along the flank of the Wind River and Owl Creek Mountains and in denuded anticlines in the floor of the basin, and rocks of Tertiary age cover the greater part of the floor of the basin. Deposits of debris from glaciers are in the mountains, and remnants of gravel-capped terraces of Pleistocene age are on the floor of the basin. The lateral extent and depth of alluvial deposits of Recent age along all the streams are highly variable. The climate of the floor of the basin is arid. The foothills probably receive a greater amount of intense rainfall than the areas at lower altitudes. Most precipitation in the Wind River Mountains falls as snow. The foothill sections, in general, are transitional zones between the cold, humid

  19. A fiber-coupled displacement measuring interferometer for determination of the posture of a reflective surface

    Energy Technology Data Exchange (ETDEWEB)

    Mao, Shuai; Hu, Peng-Cheng, E-mail: hupc@hit.edu.cn; Ding, Xue-Mei, E-mail: X.M.Ding@outlook.com; Tan, Jiu-Bin [Harbin Institute of Technology, D-403 Science Park, 2 Yikuang Street, Harbin 150080 (China)

    2016-08-15

    A fiber-coupled displacement measuring interferometer capable of determining of the posture of a reflective surface of a measuring mirror is proposed. The newly constructed instrument combines fiber-coupled displacement and angular measurement technologies. The proposed interferometer has advantages of both the fiber-coupled and the spatially beam-separated interferometer. A portable dual-position sensitive detector (PSD)-based unit within this proposed interferometer measures the parallelism of the two source beams to guide the fiber-coupling adjustment. The portable dual PSD-based unit measures not only the pitch and yaw of the retro-reflector but also measures the posture of the reflective surface. The experimental results of displacement calibration show that the deviations between the proposed interferometer and a reference one, Agilent 5530, at two different common beam directions are both less than ±35 nm, thus verifying the effectiveness of the beam parallelism measurement. The experimental results of angular calibration show that deviations of pitch and yaw with the auto-collimator (as a reference) are less than ±2 arc sec, thus proving the proposed interferometer’s effectiveness for determination of the posture of a reflective surface.

  20. A fiber-coupled displacement measuring interferometer for determination of the posture of a reflective surface

    Science.gov (United States)

    Mao, Shuai; Hu, Peng-Cheng; Ding, Xue-Mei; Tan, Jiu-Bin

    2016-08-01

    A fiber-coupled displacement measuring interferometer capable of determining of the posture of a reflective surface of a measuring mirror is proposed. The newly constructed instrument combines fiber-coupled displacement and angular measurement technologies. The proposed interferometer has advantages of both the fiber-coupled and the spatially beam-separated interferometer. A portable dual-position sensitive detector (PSD)-based unit within this proposed interferometer measures the parallelism of the two source beams to guide the fiber-coupling adjustment. The portable dual PSD-based unit measures not only the pitch and yaw of the retro-reflector but also measures the posture of the reflective surface. The experimental results of displacement calibration show that the deviations between the proposed interferometer and a reference one, Agilent 5530, at two different common beam directions are both less than ±35 nm, thus verifying the effectiveness of the beam parallelism measurement. The experimental results of angular calibration show that deviations of pitch and yaw with the auto-collimator (as a reference) are less than ±2 arc sec, thus proving the proposed interferometer's effectiveness for determination of the posture of a reflective surface.

  1. A rendering method of background reflections on a specular surface for CGH

    International Nuclear Information System (INIS)

    Ichikawa, T; Sakamoto, Y

    2013-01-01

    Computer-generated holograms (CGHs) are remarked as ideal three-dimensional displays. There are a lot of problems have to be overcome, and we focused on the rendering techniques to reconstruct realistic images. In particular, there is almost no calculation method that correctly expresses depth information. Reflected images are necessary to express complex realistic scenes. In this paper, we introduce a calculation method that generates reconstructed images with background reflections. Proposed method calculates intersections between virtual objects and rays by the ray tracing method. Then intersections are assumed as a point light source group, and light waves on a hologram plane are calculated. In the ray tracing process, when a ray hits the specular object, a ray is additionally casted to the specular direction from the intersection. If the ray hits other diffuse objects or background, the length of light path from a viewpoint to the diffuse object is calculated. By calculating light waves from a point light source on the diffuse surface distant from the light path, reflected images are expressed in the CGH. To express the quality of materials, we adopted the Cook-Torrance reflection model. In the experiment, we conducted the computer simulation to confirm that the depth of reflected images is correctly calculated. And results of optical reconstructions show that our proposed method is able to make CGHs of various qualities of material.

  2. IRAS surface brightness maps of visible reflection nebulae: evidence for non-equilibrium infrared emission

    International Nuclear Information System (INIS)

    Castelaz, M.W.; Werner, M.W.; Sellgren, K.

    1986-01-01

    Surface brightness maps at 12, 25, 60, and 100 microns of 16 visible reflection nebulae were extracted from the Infrared Astronomy Satellite (IRAS) database. The maps were produced by coadding IRAS survey scans over areas centered on the illuminating stars, and have spatial resolutions of 0.9' x 4' at 12 and 25 microns, 1.8' x 4.5' at 60 microns, and 3.6' x 5' at 100 microns. Extended emission in the four IRAS bandpasses was detected in fourteen of the reflection nebulae. The IRAS data were used to measure the flux of the infrared emission associated with each source. The energy distributions show that the 12 micron flux is greater than the 25 micron flux in 11 of the nebulae, and the peak flux occurs in the 60 or 100 micron bandpass in all 16 nebular. The 60 and 100 micron flux can be approximated by blackbodies with temperatures between 30 and 50 K, consistent with temperatures expected from extrapolation of greybody fits to the 60 and 100 micron data. The excess 12 and 25 micron emission is attributed to a nonequilibrium process such as emission from thermal fluctuations of very small grains excited by single ultraviolet photons, or emission from polycyclic aromatic hydrocarbons (PAHs) excited by ultraviolet radiation. The common features of the energy distributions of the 16 reflection nebulae, also seen in the reflection nebulae associated with the Pleiades, suggest that PAHs or very small grains may be found in most reflection nebulae

  3. Seasonal variability of benthic ammonium release in the surface sediments of the Gulf of Gdansk (southern Baltic Sea

    Directory of Open Access Journals (Sweden)

    Dorota Maksymowska-Brossard

    2001-03-01

    Full Text Available This paper describes the seasonal and spatial variations of diffusive sediment- water ammonium fluxes in the western part of the Gulf of Gdansk (southern Baltic. It assesses the potential environmental controls of these fluxes, such as the inflow of organic matter to bottom sediments and its quality, temperature-induced degradation of organic matter, and the redox potential of sediments. Ammonium fluxes, calculated using Fick's first law, were always in the direction from the sediment into the water column and differed significantly with respect to sediment type. Fluxes were most intensive in sediments with the highest silt-clay fraction located in the deepest parts of the study area. The mean annual diffusive fluxes of ammonium from sediments to near-bottom water were estimated at 5.24 tonnes km-2 year-1 for silty-clays, 1.85 tonnes km-2 year-1 for silty-sands and 1.03 tonnes km-2 year-1 for sandy sediments. There was a high seasonal variation, with the greatest ammonium release in summer and early autumn, when the temperature of near-bottom water was the highest. On the basis of the calculated diffusive ammonium fluxes, we estimated that approximately 2700 tonnes of N-NH4+ are released annually from the surface sediments of the western part of the Gulf of Gdansk, providing a minimum of 10% of the mineral nitrogen essential for primary production in surface waters. Our results are undoubtedly underestimated, as we disregarded advective ammonium fluxes, which in some areas of the Gulf of Gdansk could well be comparable to diffusive fluxes.

  4. Gain-Enhanced On-Chip Antenna Utilizing Artificial Magnetic Conductor Reflecting Surface at 94 GHz

    KAUST Repository

    Nafe, Mahmoud

    2015-08-04

    Nowadays, there is a growing demand for high frequency-bandwidth mm-wave (30-300 GHz) electronic wireless transceiver systems to support applications such as high data-rate wireless communication and high resolution imaging. Such mm-wave systems are becoming more feasible due to the extreme transistor downscaling in silicon-based integrated circuits, which enabled densely-integrated high-speed elec- tronics operating up to more than 100 GHz with low fabrication cost. To further enhance system integrability, it is required to implement all wireless system compo- nents on the chip. Presently, the last major barrier to true System-on-Chip (SoC) realization is the antenna implementation on the silicon chip. Although at mm-wave frequencies the antenna size becomes small enough to fit on chip, the antenna performance is greatly deteriorated due the high conductivity and high relative permittivity of the silicon substrate. The negative e↵ects of the silicon substrate could be avoided by using a metallic reflecting surface on top of silicon, which e↵ectively isolates the antenna from the silicon. However, this approach has the shortcoming of having to implement the antenna on the usually very thin silicon oxide layer of a typical CMOS fabrication process (10’s of μm). This forces the antenna to be in a very close proximity (less than one hundredth of a wavelength) to the reflecting surface. In this regime, the use of conventional metallic reflecting surface for silicon shielding has severe e↵ects on the antenna performance as it tends to reduce the antenna radiation resistance resulting in most of the energy being absorbed rather than radiated. In this work, the use of specially patterned reflecting surfaces for improving on- chip antenna performance is investigated. By using a periodic metallic surface on top of a grounded substrate, the structure can mimic the behavior of a perfect mag- netic conductor, hence called Artificial Magnetic Conductor (AMC) surface

  5. Degradation state of organic matter in surface sediments from the Southern Beaufort Sea: a lipid approach

    Directory of Open Access Journals (Sweden)

    J.-F. Rontani

    2012-09-01

    Full Text Available For the next decades significant climatic changes should occur in the Arctic zone. The expected destabilisation of permafrost and its consequences for hydrology and plant cover should increase the input of terrigenous carbon to coastal seas. Consequently, the relative importance of the fluxes of terrestrial and marine organic carbon to the seafloor will likely change, strongly impacting the preservation of organic carbon in Arctic marine sediments. Here, we investigated the lipid content of surface sediments collected on the Mackenzie basin in the Beaufort Sea. Particular attention was given to biotic and abiotic degradation products of sterols and monounsaturated fatty acids. By using sitosterol and campesterol degradation products as tracers of the degradation of terrestrial higher plant inputs and brassicasterol degradation products as tracers of degradation of phytoplanktonic organisms, it could be observed that autoxidation, photooxidation and biodegradation processes act much more intensively on higher plant debris than on phytoplanktonic organisms. Examination of oxidation products of monounsaturated fatty acids showed that photo- and autoxidation processes act more intensively on bacteria than on phytodetritus. Enhanced damages induced by singlet oxygen (transferred from senescent phytoplanktonic cells in bacteria were attributed to the lack of an adapted antioxidant system in these microorganisms. The strong oxidative stress observed in the sampled sediments resulted in the production of significant amounts of epoxy acids and unusually high proportions of monounsaturated fatty acids with a trans double bond. The formation of epoxy acids was attributed to peroxygenases (enzymes playing a protective role against the deleterious effects of fatty acid hydroperoxides in vivo, while cis/trans isomerisation was probably induced by thiyl radicals produced during the reaction of thiols with hydroperoxides. Our results confirm the

  6. Degradation state of organic matter in surface sediments from the Southern Beaufort Sea: a lipid approach

    Science.gov (United States)

    Rontani, J.-F.; Charriere, B.; Petit, M.; Vaultier, F.; Heipieper, H. J.; Link, H.; Chaillou, G.; Sempéré, R.

    2012-09-01

    For the next decades significant climatic changes should occur in the Arctic zone. The expected destabilisation of permafrost and its consequences for hydrology and plant cover should increase the input of terrigenous carbon to coastal seas. Consequently, the relative importance of the fluxes of terrestrial and marine organic carbon to the seafloor will likely change, strongly impacting the preservation of organic carbon in Arctic marine sediments. Here, we investigated the lipid content of surface sediments collected on the Mackenzie basin in the Beaufort Sea. Particular attention was given to biotic and abiotic degradation products of sterols and monounsaturated fatty acids. By using sitosterol and campesterol degradation products as tracers of the degradation of terrestrial higher plant inputs and brassicasterol degradation products as tracers of degradation of phytoplanktonic organisms, it could be observed that autoxidation, photooxidation and biodegradation processes act much more intensively on higher plant debris than on phytoplanktonic organisms. Examination of oxidation products of monounsaturated fatty acids showed that photo- and autoxidation processes act more intensively on bacteria than on phytodetritus. Enhanced damages induced by singlet oxygen (transferred from senescent phytoplanktonic cells) in bacteria were attributed to the lack of an adapted antioxidant system in these microorganisms. The strong oxidative stress observed in the sampled sediments resulted in the production of significant amounts of epoxy acids and unusually high proportions of monounsaturated fatty acids with a trans double bond. The formation of epoxy acids was attributed to peroxygenases (enzymes playing a protective role against the deleterious effects of fatty acid hydroperoxides in vivo), while cis/trans isomerisation was probably induced by thiyl radicals produced during the reaction of thiols with hydroperoxides. Our results confirm the important role played by abiotic

  7. Experimental removal of wetland emergent vegetation leads to decreased methylmercury production in surface sediment

    Science.gov (United States)

    Windham-Myers, Lisamarie; Marvin-DiPasquale, Mark; Krabbenhoft, David P.; Agee, Jennifer L.; Cox, Marisa H.; Heredia-Middleton, Pilar; Coates, Carolyn; Kakouros, Evangelos

    2009-01-01

    We performed plant removal (devegetation) experiments across a suite of ecologically diverse wetland settings (tidal salt marshes, river floodplain, rotational rice fields, and freshwater wetlands with permanent or seasonal flooding) to determine the extent to which the presence (or absence) of actively growing plants influences the activity of the Hg(II)-methylating microbial community and the availability of Hg(II) to those microbes. Vegetated control plots were paired with neighboring devegetated plots in which photosynthetic input was terminated 4–8 months prior to measurements, through clipping aboveground biomass, severing belowground connections, and shading the sediment surface to prevent regrowth. Across all wetlands, devegetation decreased the activity of the Hg(II)-methylating microbial community (kmeth) by 38%, calculated MeHg production potential (MP) rates by 36%, and pore water acetate concentration by 78%. Decreases in MP were associated with decreases in microbial sulfate reduction in salt marsh settings. In freshwater agricultural wetlands, decreases in MP were related to indices of microbial iron reduction. Sediment MeHg concentrations were also significantly lower in devegetated than in vegetated plots in most wetland settings studied. Devegetation effects were correlated with live root density (percent volume) and were most profound in vegetated sites with higher initial pore water acetate concentrations. Densely rooted wetlands had the highest rates of microbial Hg(II)-methylation activity but often the lowest concentrations of bioavailable reactive Hg(II). We conclude that the exudation of labile organic carbon (e.g., acetate) by plants leads to enhanced microbial sulfate and iron reduction activity in the rhizosphere, which results in high rates of microbial Hg(II)-methyation and high MeHg concentrations in wetland sediment.

  8. Surface Compositional Units on Mercury from Spectral Reflectance at Ultraviolet to Near-infrared Wavelengths

    Science.gov (United States)

    Izenberg, N. R.; Holsclaw, G. M.; Domingue, D. L.; McClintock, W. E.; Klima, R. L.; Blewett, D. T.; Helbert, J.; Head, J. W.; Sprague, A. L.; Vilas, F.; Solomon, S. C.

    2012-12-01

    The Mercury Atmospheric and Surface Composition Spectrometer (MASCS) on the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft has been acquiring reflectance spectra of Mercury's surface for over 16 months. The Visible and Infrared Spectrograph (VIRS) component of MASCS has accumulated a global data set of more than 2 million spectra over the wavelength range 300-1450 nm. We have derived a set of VIRS spectral units (VSUs) from the following spectral parameters: visible brightness (R575: reflectance at 575 nm); visible/near-infrared reflectance ratio (VISr: reflectance at 415 nm to that at 750 nm); and ultraviolet reflectance ratio (UVr: reflectance at 310 nm to that at 390 nm). Five broad, slightly overlapping VSUs may be distinguished from these parameters. "Average VSU" areas have spectral parameters close to mean global values. "Dark blue VSU" areas have spectra with low R575 and high UVr. "Red VSU" areas have spectra with low UVr and higher VISr and R575 than average. "Intermediate VSU" areas have spectra with higher VISr than VSU red, generally higher R575, and a wide range of UVr. "Bright VSU" areas have high R575 and VISr and intermediate UVr. Several units defined by morphological or multispectral criteria correspond to specific VSUs, including low-reflectance material (dark blue VSU), pyroclastic deposits (red VSU), and hollows (intermediate VSU), but these VSUs generally include other types of areas as well. VSU definitions are complementary to those obtained by unsupervised clustering analysis. The global distribution of VIRS spectral units provides new information on Mercury's geological evolution. Much of Mercury's northern volcanic plains show spectral properties ranging from those of average VSU to those of red VSU, as does a large region in the southern hemisphere centered near 50°S, 245°E. Dark blue VSU material is widely distributed, with concentrations south of the northern plains, around the Rembrandt and

  9. Quantitative determination of polyphosphate in sediments using Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR) spectroscopy and partial least squares regression.

    Science.gov (United States)

    Khoshmanesh, Aazam; Cook, Perran L M; Wood, Bayden R

    2012-08-21

    Phosphorus (P) is a major cause of eutrophication and subsequent loss of water quality in freshwater ecosystems. A major part of the flux of P to eutrophic lake sediments is organically bound or of biogenic origin. Despite the broad relevance of polyphosphate (Poly-P) in bioremediation and P release processes in the environment, its quantification is not yet well developed for sediment samples. Current methods possess significant disadvantages because of the difficulties associated with using a single extractant to extract a specific P compound without altering others. A fast and reliable method to estimate the quantitative contribution of microorganisms to sediment P release processes is needed, especially when an excessive P accumulation in the form of polyphosphate (Poly-P) occurs. Development of novel approaches for application of emerging spectroscopic techniques to complex environmental matrices such as sediments significantly contributes to the speciation models of P mobilization, biogeochemical nutrient cycling and development of nutrient models. In this study, for the first time Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR) spectroscopy in combination with partial least squares (PLS) was used to quantify Poly-P in sediments. To reduce the high absorption matrix components in sediments such as silica, a physical extraction method was developed to separate sediment biological materials from abiotic particles. The aim was to achieve optimal separation of the biological materials from sediment abiotic particles with minimum chemical change in the sample matrix prior to ATR-FTIR analysis. Using a calibration set of 60 samples for the PLS prediction models in the Poly-P concentration range of 0-1 mg g(-1) d.w. (dry weight of sediment) (R(2) = 0.984 and root mean square error of prediction RMSEP = 0.041 at Factor-1) Poly-P could be detected at less than 50 μg g(-l) d.w. Using this technique, there is no solvent extraction or chemical

  10. Measurements of long-range interactions between protein-functionalized surfaces by total internal reflection microscopy.

    Science.gov (United States)

    Wang, Zhaohui; Gong, Xiangjun; Ngai, To

    2015-03-17

    Understanding the interaction between protein-functionalized surfaces is an important subject in a variety of protein-related processes, ranging from coatings for biomedical implants to targeted drug carriers and biosensors. In this work, utilizing a total internal reflection microscope (TIRM), we have directly measured the interactions between micron-sized particles decorated with three types of common proteins concanavalin A (ConA), bovine serum albumin (BSA), lysozyme (LYZ), and glass surface coated with soy proteins (SP). Our results show that the protein adsorption greatly affects the charge property of the surfaces, and the interactions between those protein-functionalized surfaces depend on solution pH values. At pH 7.5-10.0, all these three protein-functionalized particles are highly negatively charged, and they move freely above the negatively charged SP-functionalized surface. The net interaction between protein-functionalized surfaces captured by TIRM was found as a long-range, nonspecific double-layer repulsion. When pH was decreased to 5.0, both protein-functionalized surfaces became neutral and double-layer repulsion was greatly reduced, resulting in adhesion of all three protein-functionalized particles to the SP-functionalized surface due to the hydrophobic attraction. The situation is very different at pH = 4.0: BSA-decorated particles, which are highly charged, can move freely above the SP-functionalized surfaces, while ConA- and LYZ-decorated particles can only move restrictively in a limited range. Our results quantify these nonspecific kT-scale interactions between protein-functionalized surfaces, which will enable the design of surfaces for use in biomedical applications and study of biomolecular interactions.

  11. NPP/VIIRS Surface Reflectance Daily L2G Global 1km and 500m SIN Grid NRT

    Data.gov (United States)

    National Aeronautics and Space Administration — The VNP09GA_NRT is a Near Real Time (NRT) S-NPP/VIIRS 500m and 1km Daily Level 2G Surface Reflectance product. The NPP/ VIIRS surface reflectance products are...

  12. A preliminary investigation of the distribution of heavy metals in surface sediments of the Cona tidal marsh (Venice Lagoon)

    International Nuclear Information System (INIS)

    Bernardi, S.; Costa, F.; Vazzoler, S.; Zonta, R.

    1988-01-01

    Data are from the two series of surface sediment sampling in an interface area between the Venice Lagoon and the mainland. The distribution of heavy metals gives a correlation with polluted sourcesites-identified in the channel systems with a highly polluted input-and allows us to identify the localities of accumulation. Restricted to the estuary of the river tributary transporting a high concentration of pollutants into a tidal marsh area of the lagoon, the study shows the effect of the fresh water forcing to distribute heavy metals on surface sediments. Within the scope of this preliminary investigation, indications from sampling identify a sector of the 'palude of Cona' in this estuary, which is highly suitable for detailed studies on precesses affecting heavy-metal distributions in bottom surface sediments of shallow-water areas

  13. Degradation state of organic matter in surface sediments from the Beaufort Shelf: a lipid approach

    Science.gov (United States)

    Rontani, J.-F.; Charriere, B.; Petit, M.; Vaultier, F.; Heipieper, H. J.; Link, H.; Chaillou, G.; Sempéré, R.

    2012-03-01

    The lipid content of surface sediments collected on the Beaufort Shelf was examined. Particular attention was given to biotic and abiotic degradation products of sterols and monounsaturated fatty acids. By using sitosterol and campesterol degradation products as tracers of the degradation of terrestrial higher plant inputs and brassicasterol degradation products as tracers of degradation of phytoplanktonic organisms, it could be observed that autoxidation, photooxidation and biodegradation processes act much more intensively on higher plant debris than on phytoplanktonic organisms. Examination of oxidation products of monounsaturated fatty acids showed that photo- and autoxidation processes act more intensively on bacteria than on phytodetritus. Enhanced damages induced by singlet oxygen (transferred from senescent phytoplanktonic cells) in bacteria were attributed to the lack of an adapted antioxidant system in these microorganisms. The strong oxidative stress observed in the sampled sediments resulted in the production of significant amounts of epoxyacids and unusually very high proportions of monounsaturated fatty acids with a trans double bond. The formation of epoxyacids was attributed to peroxygenases (enzymes playing a protective role against the deleterious effects of fatty acid hydroperoxides in vivo), while cis/trans isomerization was probably induced by thiyl radicals produced during the reaction of thiols with hydroperoxides. Our results confirm the important role played by abiotic oxidative processes in the degradation of marine bacteria and do not support the generally expected refractory character of terrigenous material deposited in deltaic systems.

  14. Microbial activity in surface sediments of Chacopata-Bocaripo lagoon axis, Sucre State, Venezuela.

    Science.gov (United States)

    Segnini de B, Mary Isabel; Gómez, Irma; Brito, Leonor; Acosta, Vanessa; Troccoli, Luis

    2015-02-28

    The aim of this work was to evaluate the microbial activity of the surface sediments (0-10 cm) of the Chacopata-Bocaripo lagoon axis (Ch-BLA) through microbiological parameters: microbial biomass (Cmic) dehydrogenase activity (DHS), fluorescein diacetate hydrolysis (HFDA), arginine ammonification (AA) and biochemical parameters: phosphatase (PHa) and urease (URa) activity. They were determined during transition (July 2010) and upwelling (March 2011) periods. Total organic carbon (TOC) did not vary significantly (p⩾0.05) between climatic periods. All the parameters studied were higher in upwelling season: Cmic (191.79 mg Cmic kg(-1)), DHS (228.70 μg TFF g(-1) 24 h(-1)), HFDA (204.09 μg fluorescein g(-1) 24 h(-1)), AA (13.09 μg NH4-N g(-1) h(-1)), PHa (132.31 μg pNF g(-1) h(-1)), URa (12.90 μg NH4-N g(-1) h(-1)). They appear to be controlled by the availability and quality of nutrients in each climatic period, and were useful tools for evaluating changes in microbial activity in marine sediments. Copyright © 2014 Elsevier Ltd. All rights reserved.

  15. Temporal variation of coastal surface sediment bacterial communities along an environmental pollution gradient.

    Science.gov (United States)

    Thiyagarajan, V; Tsoi, M M Y; Zhang, W; Qian, P Y

    2010-07-01

    Terminal restriction fragment length polymorphism analysis (T-RFLP) was used to track the changes of bacterial community compositions (BCC) in coastal surface sediments along an environmental pollution gradient between 2004 and 2006. BCC in the chronically contaminated sites showed the largest deviation from those in the adjacent sites. Surprisingly, BCC at two contrasting environments (oceanic vs. river-influenced) were more similar. Unexpectedly, the BCC did not recover (when compared to oceanic control site) even after 5 years of pollution abatement initiatives in Victoria Harbour, Hong Kong. On the other hand, disposal of treated sewage for 5 years in one of the sites did not significantly affect the BCC. A striking seasonal variation in the BCC was observed at only the polluted sites. Although factors other than pollution gradients may explain the observed BCC patterns, the information presented here can be useful in predicting long-term effects of pollution on BCC. Furthermore, this study suggests that BCC analysis using T-RFLP is a faster, reliable and easier approach to monitor microbenthic community response to environmental pollution gradient in coastal sediments. 2010 Elsevier Ltd. All rights reserved.

  16. Incisor inclination determined by the light reflection zone on the tooth's surface.

    Science.gov (United States)

    Brezniak, Naphtali; Turgeman, Ronit; Redlich, Meir

    2010-01-01

    Maxillary incisors are the most prominent teeth, and their inclination plays an important role in esthetics. In orthodontics, the inclination of central incisors is usually determined by cephalometric analysis. This publication suggests an adjunctive clinical measure to determine this inclination. The objective of the study was to examine the correlation between the inclinations of maxillary incisors measured on a cephalometric lateral headfilm and the light reflection zone appearing on the buccal surface of the teeth on anterior intraoral photographs. Maxillary incisor inclination, divided into three levels-proclination, normal inclination, and retroclination-of 65 patients was determined by means of cephalometric analysis, using three angular measurements (maxillary incisor to sella-nasion, maxillary incisor to Frankfort horizontal, and maxillary incisor to nasion-point A). The anterior intraoral photographs of the 65 patients were divided into 3 groups according to the reflection zone on the maxillary central incisors as determined from the photographs: incisal, middle, and gingival. The correlation and agreement between the two parameters were evaluated by chi-square and kappa statistics. The light reflection zone on the tooth surface as it appears on intraoral photographs-incisal, middle, or gingival-correlated with statistical significance to the angular inclination of the teeth-proclination, normal inclination, and retroclination, respectively-as determined by means of cephalometric analysis (P light reflection zone viewed on the buccal surface of intraoral photographs. This method might be used as a new screening tool and further as an additional clinical tool for assessing treatment plans in orthodontics and other fields of dentistry.

  17. [Risk assessment and analysis of polycyclic aromatic hydrocarbons in the surface sediments of Xinglin Bay Suburb Rivers of Xiamen].

    Science.gov (United States)

    Cheng, Qi-ming; Huang, Qing; Liao, Zhen-ni; Su, Li; Liu, Xing-qiang; Tang, Jian-feng

    2015-01-01

    The concentrations of 16 polycyclic aromatic hydrocarbons (PAHs), declared as carcinogens by USEPA, were measured in the sediment samples (n = 19) collected along Xinglin Bay rivers/canals present in Xiamen. PAHs were extracted using accelerated solvent extraction system and analyzed using gas chromatography-mass spectrometry (GC-MS). The possible sources of PAHs and their health risk were investigated. Among selected PAHs, 13 PAHs were detected in the surface sediments. Total concentrations of PAHs in the surface sediments ranged from 413.00 to 2748.81 ng x g(-1), with a mean value of 949.56 ng x g(-1). The mean concentration of highly carcinogenic compounds such as benzo [k] fluoranthene (BkF) and benzo [g, h, i] perylene (BghiP) were 69.15 ng x g(-1) and 49.86 ng x g(-1), respectively and counted for 73.68% out of the total samples. The dominant PAH compounds were 2, 3 and 4 rings and counted for 61.03% and 23.53% , respectively; while 5-6 rings containing PAHs were accounted for 15.82%. According to the results, 68.42% of samples were moderately contaminated, while 31.58% were highly contaminated with PAHs. Based on the ratios of Ant/(Ant + Phe) and Fla/(Fla + Pyr), it cleared that PAHs in surface sediments were mainly derived from fossil fuel and combustion products. Principal component analysis results and sediment quality benchmarks (mSQG-Q) were used for risk assessment of these PAH contaminated sediments. The risk SQG-Q of 16 PAHs were less than 0.50. Comprehensive content, composition and SQG-Q showed that a certain degree of ecological risks of PAH pollution existed in the surface sediments, particularly in the sites close to Xinglin Industrial Zone (2, 3, 5 and 9) and Gangtou(13), which need further research work and proper attentions.

  18. Determining surface coverage of ultra-thin gold films from X-ray reflectivity measurements

    International Nuclear Information System (INIS)

    Kossoy, A.; Simakov, D.; Olafsson, S.; Leosson, K.

    2013-01-01

    The paper describes usage of X-ray reflectivity for characterization of surface coverage (i.e. film continuity) of ultra-thin gold films which are widely studied for optical, plasmonic and electronic applications. The demonstrated method is very sensitive and can be applied for layers below 1 nm. It has several advantages over other techniques which are often employed in characterization of ultra-thin metal films, such as optical absorption, Atomic Force Microscopy, Transmission Electron Microscopy or Scanning Electron Microscopy. In contrast to those techniques our method does not require specialized sample preparation and measurement process is insensitive to electrostatic charge and/or presence of surface absorbed water. We validate our results with image processing of Scanning Electron Microscopy images. To ensure precise quantitative analysis of the images we developed a generic local thresholding algorithm which allowed us to treat series of images with various values of surface coverage with similar image processing parameters. - Highlights: • Surface coverage/continuity of ultra-thin Au films (up to 7 nm) was determined. • Results from X-ray reflectivity were verified by scanning electron microscopy. • We developed local thresholding algorithm to treat non-homogeneous image contrast

  19. Key parameters of the sediment surface morphodynamics in an estuary - An assessment of model solutions

    Science.gov (United States)

    Sampath, D. M. R.; Boski, T.

    2018-05-01

    Large-scale geomorphological evolution of an estuarine system was simulated by means of a hybrid estuarine sedimentation model (HESM) applied to the Guadiana Estuary, in Southwest Iberia. The model simulates the decadal-scale morphodynamics of the system under environmental forcing, using a set of analytical solutions to simplified equations of tidal wave propagation in shallow waters, constrained by empirical knowledge of estuarine sedimentary dynamics and topography. The key controlling parameters of the model are bed friction (f), current velocity power of the erosion rate function (N), and sea-level rise rate. An assessment of sensitivity of the simulated sediment surface elevation (SSE) change to these controlling parameters was performed. The model predicted the spatial differentiation of accretion and erosion, the latter especially marked in the mudflats within mean sea level and low tide level and accretion was mainly in a subtidal channel. The average SSE change mutually depended on both the friction coefficient and power of the current velocity. Analysis of the average annual SSE change suggests that the state of intertidal and subtidal compartments of the estuarine system vary differently according to the dominant processes (erosion and accretion). As the Guadiana estuarine system shows dominant erosional behaviour in the context of sea-level rise and sediment supply reduction after the closure of the Alqueva Dam, the most plausible sets of parameter values for the Guadiana Estuary are N = 1.8 and f = 0.8f0, or N = 2 and f = f0, where f0 is the empirically estimated value. For these sets of parameter values, the relative errors in SSE change did not exceed ±20% in 73% of simulation cells in the studied area. Such a limit of accuracy can be acceptable for an idealized modelling of coastal evolution in response to uncertain sea-level rise scenarios in the context of reduced sediment supply due to flow regulation. Therefore, the idealized but cost

  20. Impacts of mangrove density on surface sediment accretion, belowground biomass and biogeochemistry in Puttalam Lagoon, Sri Lanka

    Science.gov (United States)

    Phillips, D.H.; Kumara, M.P.; Jayatissa, L.P.; Krauss, Ken W.; Huxham, M.

    2017-01-01

    Understanding the effects of seedling density on sediment accretion, biogeochemistry and belowground biomass in mangrove systems can help explain ecological functioning and inform appropriate planting densities during restoration or climate change mitigation programs. The objectives of this study were to examine: 1) impacts of mangrove seedling density on surface sediment accretion, texture, belowground biomass and biogeochemistry, and 2) origins of the carbon (C) supplied to the mangroves in Palakuda, Puttalam Lagoon, Sri Lanka. Rhizophora mucronata propagules were planted at densities of 6.96, 3.26, 1.93 and 0.95 seedlings m−2along with an unplanted control (0 seedlings m−2). The highest seedling density generally had higher sediment accretion rates, finer sediments, higher belowground biomass, greatest number of fine roots and highest concentrations of C and nitrogen (N) (and the lowest C/N ratio). Sediment accretion rates, belowground biomass (over 1370 days), and C and N concentrations differed significantly between seedling densities. Fine roots were significantly greater compared to medium and coarse roots across all plantation densities. Sulphur and carbon stable isotopes did not vary significantly between different density treatments. Isotope signatures suggest surface sediment C (to a depth of 1 cm) is not derived predominantly from the trees, but from seagrass adjacent to the site.

  1. Surface reflectance drives nest box temperature profiles and thermal suitability for target wildlife.

    Directory of Open Access Journals (Sweden)

    Stephen R Griffiths

    Full Text Available Thermal properties of tree hollows play a major role in survival and reproduction of hollow-dependent fauna. Artificial hollows (nest boxes are increasingly being used to supplement the loss of natural hollows; however, the factors that drive nest box thermal profiles have received surprisingly little attention. We investigated how differences in surface reflectance influenced temperature profiles of nest boxes painted three different colors (dark-green, light-green, and white: total solar reflectance 5.9%, 64.4%, and 90.3% respectively using boxes designed for three groups of mammals: insectivorous bats, marsupial gliders and brushtail possums. Across the three different box designs, dark-green (low reflectance boxes experienced the highest average and maximum daytime temperatures, had the greatest magnitude of variation in daytime temperatures within the box, and were consistently substantially warmer than light-green boxes (medium reflectance, white boxes (high reflectance, and ambient air temperatures. Results from biophysical model simulations demonstrated that variation in diurnal temperature profiles generated by painting boxes either high or low reflectance colors could have significant ecophysiological consequences for animals occupying boxes, with animals in dark-green boxes at high risk of acute heat-stress and dehydration during extreme heat events. Conversely in cold weather, our modelling indicated that there are higher cumulative energy costs for mammals, particularly smaller animals, occupying light-green boxes. Given their widespread use as a conservation tool, we suggest that before boxes are installed, consideration should be given to the effect of color on nest box temperature profiles, and the resultant thermal suitability of boxes for wildlife, particularly during extremes in weather. Managers of nest box programs should consider using several different colors and installing boxes across a range of both orientations and

  2. [The research of the relationship between snow properties and the bidirectional polarized reflectance from snow surface].

    Science.gov (United States)

    Sun, Zhong-Qiu; Wu, Zheng-Fang; Zhao, Yun-Sheng

    2014-10-01

    In the context of remote sensing, the reflectance of snow is a key factor for accurate inversion for snow properties, such as snow grain size, albedo, because of it is influenced by the change of snow properties. The polarized reflectance is a general phenomenon during the reflected progress in natural incident light In this paper, based on the correct measurements for the multiple-angle reflected property of snow field in visible and near infrared wavelength (from 350 to 2,500 nm), the influence of snow grain size and wet snow on the bidirectional polarized property of snow was measured and analyzed. Combining the results measured in the field and previous conclusions confirms that the relation between polarization and snow grain size is obvious in infrared wavelength (at about 1,500 nm), which means the degree of polarization increasing with an increase of snow grain size in the forward scattering direction, it is because the strong absorption of ice near 1,500 nm leads to the single scattering light contributes to the reflection information obtained by the sensor; in other word, the larger grain size, the more absorption accompanying the larger polarization in forward scattering direction; we can illustrate that the change from dry snow to wet snow also influences the polarization property of snow, because of the water on the surface of snow particle adheres the adjacent particles, that means the wet snow grain size is larger than the dry snow grain size. Therefore, combining the multiple-angle polarization with reflectance will provide solid method and theoretical basis for inversion of snow properties.

  3. Surface reflectance drives nest box temperature profiles and thermal suitability for target wildlife.

    Science.gov (United States)

    Griffiths, Stephen R; Rowland, Jessica A; Briscoe, Natalie J; Lentini, Pia E; Handasyde, Kathrine A; Lumsden, Linda F; Robert, Kylie A

    2017-01-01

    Thermal properties of tree hollows play a major role in survival and reproduction of hollow-dependent fauna. Artificial hollows (nest boxes) are increasingly being used to supplement the loss of natural hollows; however, the factors that drive nest box thermal profiles have received surprisingly little attention. We investigated how differences in surface reflectance influenced temperature profiles of nest boxes painted three different colors (dark-green, light-green, and white: total solar reflectance 5.9%, 64.4%, and 90.3% respectively) using boxes designed for three groups of mammals: insectivorous bats, marsupial gliders and brushtail possums. Across the three different box designs, dark-green (low reflectance) boxes experienced the highest average and maximum daytime temperatures, had the greatest magnitude of variation in daytime temperatures within the box, and were consistently substantially warmer than light-green boxes (medium reflectance), white boxes (high reflectance), and ambient air temperatures. Results from biophysical model simulations demonstrated that variation in diurnal temperature profiles generated by painting boxes either high or low reflectance colors could have significant ecophysiological consequences for animals occupying boxes, with animals in dark-green boxes at high risk of acute heat-stress and dehydration during extreme heat events. Conversely in cold weather, our modelling indicated that there are higher cumulative energy costs for mammals, particularly smaller animals, occupying light-green boxes. Given their widespread use as a conservation tool, we suggest that before boxes are installed, consideration should be given to the effect of color on nest box temperature profiles, and the resultant thermal suitability of boxes for wildlife, particularly during extremes in weather. Managers of nest box programs should consider using several different colors and installing boxes across a range of both orientations and shade profiles (i

  4. Distribution and pollution assessment of heavy metals in surface sediments in the Yellow Sea.

    Science.gov (United States)

    Jiang, Xin; Teng, Ankang; Xu, Wenzhe; Liu, Xiaoshou

    2014-06-15

    Heavy metal concentrations in surface sediments at 56 stations during two cruises in the Yellow Sea in summer and winter, 2011 were analyzed by inductively coupled plasma-mass spectrometry. The pollution status was assessed via the Geoaccumulation index and Hankanson potential ecological risk index. Higher concentrations of heavy metals (except for Mn) were found in the central Southern Yellow Sea and the western Northern Yellow Sea. The higher contents of Mn were much closer to Shandong Peninsula. Correlation analyses indicated that Pb, Cu, Fe, Ni, Zn and Co probably had the same origin and were controlled by grain size and total organic carbon. Pollution assessment showed that most areas of the Yellow Sea were not or lowly contaminated with the exception of the northwest and south parts of the Southern Yellow Sea showing Cd-contamination. The pollution status of the Yellow Sea in summer was worse than that in winter. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. Dinoflagellate cysts from surface sediments of Syracuse Bay (Western Ionian Sea, Mediterranean)

    Science.gov (United States)

    Rubino, Fernando; Belmonte, Manuela; Caroppo, Carmela; Giacobbe, Mariagrazia

    2010-02-01

    The occurrence and abundance of dinoflagellate cysts were investigated for the first time at an Ionian locality along the south-eastern coast of Sicily, subject to spring-summer harmful algal events. Thirty-four cyst morphotypes were recognized belonging to 24 taxa identified at least at the genus level. Cyst abundance in surface sediments ranged from 43 to 828 cysts g -1 dry weight, with the highest numbers recorded at the most restricted station. Germination experiments allowed confirmation of species identification determined by cyst analysis and provided clonal cultures of Alexandrium minutum and Gymnodinium nolleri, two of the bloom-forming species in the area. This represents the first record of G. nolleri for the Mediterranean Sea.

  6. Content of trace metals in surface sediments of Lac Sud de Tunis before development

    International Nuclear Information System (INIS)

    Ben Souissi, J.; Zaouali, J.; Aouij, S.; Orlando, E.; Mazghouni, M.; Rezig, M.

    1999-01-01

    The analysis of metal (Hg, Cd, Pb, Cu, Cr, Ni, Mn, Zn, Fe) concentrations in the surface sediments of the South Lake of Tunis before its restoration showed a high level of contamination. The values for mercury, cadmium and lead oscillate respectively between (0,17 and 2,6 μg/g d.w), (0,13 and 13,3 μg/g d. w); (3,97 and 698 μg/g d. w). This pollution is generated by the intensive industrial activity situated on south banks of the Lake. This environment constitutes since more of the millennium a outfall of urban used waters and since one century an outfall of industrial waste waters strongly charged with nutrients and heavy metals. (author)

  7. Simulation calculations of physical sputtering and reflection coefficient of plasma-irradiated carbon surface

    International Nuclear Information System (INIS)

    Kawamura, T.; Ono, T.; Yamamura, Y.

    1994-08-01

    Physical sputtering yields from the carbon surface irradiated by the boundary plasma are obtained with the use of a Monte Carlo simulation code ACAT. The yields are calculated for many random initial energy and angle values of incident protons or deuterons with a Maxwellian velocity distribution, and then averaged. Here the temperature of the boundary plasma, the sheath potential and the angle δ between the magnetic field line and the surface normal are taken into account. A new fitting formula for an arrangement of the numerical data of sputtering yield is introduced, in which six fitting parameters are determined from the numerical results and listed. These results provide a way to estimate the erosion of carbon materials irradiated by boundary plasma. The particle reflection coefficients for deuterons and their neutrals from a carbon surface are also calculated by the same code and presented together with, for comparison, that for the case of monoenergetic normal incidence. (author)

  8. Automatic and improved radiometric correction of Landsat imagery using reference values from MODIS surface reflectance images

    Science.gov (United States)

    Pons, X.; Pesquer, L.; Cristóbal, J.; González-Guerrero, O.

    2014-12-01

    Radiometric correction is a prerequisite for generating high-quality scientific data, making it possible to discriminate between product artefacts and real changes in Earth processes as well as accurately produce land cover maps and detect changes. This work contributes to the automatic generation of surface reflectance products for Landsat satellite series. Surface reflectances are generated by a new approach developed from a previous simplified radiometric (atmospheric + topographic) correction model. The proposed model keeps the core of the old model (incidence angles and cast-shadows through a digital elevation model [DEM], Earth-Sun distance, etc.) and adds new characteristics to enhance and automatize ground reflectance retrieval. The new model includes the following new features: (1) A fitting model based on reference values from pseudoinvariant areas that have been automatically extracted from existing reflectance products (Terra MODIS MOD09GA) that were selected also automatically by applying quality criteria that include a geostatistical pattern model. This guarantees the consistency of the internal and external series, making it unnecessary to provide extra atmospheric data for the acquisition date and time, dark objects or dense vegetation. (2) A spatial model for atmospheric optical depth that uses detailed DEM and MODTRAN simulations. (3) It is designed so that large time-series of images can be processed automatically to produce consistent Landsat surface reflectance time-series. (4) The approach can handle most images, acquired now or in the past, regardless of the processing system, with the exception of those with extremely high cloud coverage. The new methodology has been successfully applied to a series of near 300 images of the same area including MSS, TM and ETM+ imagery as well as to different formats and processing systems (LPGS and NLAPS from the USGS; CEOS from ESA) for different degrees of cloud coverage (up to 60%) and SLC

  9. Antibody adsorption on the surface of water studied by neutron reflection.

    Science.gov (United States)

    Smith, Charles; Li, Zongyi; Holman, Robert; Pan, Fang; Campbell, Richard A; Campana, Mario; Li, Peixun; Webster, John R P; Bishop, Steven; Narwal, Rojaramani; Uddin, Shahid; van der Walle, Christopher F; Lu, Jian R

    2017-04-01

    Surface and interfacial adsorption of antibody molecules could cause structural unfolding and desorbed molecules could trigger solution aggregation, resulting in the compromise of physical stability. Although antibody adsorption is important and its relevance to many mechanistic processes has been proposed, few techniques can offer direct structural information about antibody adsorption under different conditions. The main aim of this study was to demonstrate the power of neutron reflection to unravel the amount and structural conformation of the adsorbed antibody layers at the air/water interface with and without surfactant, using a monoclonal antibody 'COE-3' as the model. By selecting isotopic contrasts from different ratios of H 2 O and D 2 O, the adsorbed amount, thickness and extent of the immersion of the antibody layer could be determined unambiguously. Upon mixing with the commonly-used non-ionic surfactant Polysorbate 80 (Tween 80), the surfactant in the mixed layer could be distinguished from antibody by using both hydrogenated and deuterated surfactants. Neutron reflection measurements from the co-adsorbed layers in null reflecting water revealed that, although the surfactant started to remove antibody from the surface at 1/100 critical micelle concentration (CMC) of the surfactant, complete removal was not achieved until above 1/10 CMC. The neutron study also revealed that antibody molecules retained their globular structure when either adsorbed by themselves or co-adsorbed with the surfactant under the conditions studied.

  10. The influence of surface reflectance anisotropy on estimation of soil properties

    Science.gov (United States)

    Bartholomeus, Harm; Roosjen, Peter; Clevers, Jan

    2014-05-01

    The spatial variation in soil properties is an important factor for agricultural management. Unmanned airborne vehicles (UAV's) equipped with a hyperspectral mapping system may provide these data, but anisotropic reflectance effects may have an influence on the derived soil properties. Besides influencing the reflectance, angular observations may deliver added information about soil properties. We investigated the anisotropic behavior of 59 soil samples with a large variation in soil composition, by measuring their reflectance (350-2500 nm) over 92 different angles using a robot-based laboratory goniometer system. The results show that the anisotropic behavior of the soils influences the measured reflectance significantly, which limits the accurate prediction of soil properties (OM and clay especially). However, prediction accuracies of OM increase when spectra are measured under specific angles. Prediction accuracies further increase when a combination of observation angles is being used. Apart from that, using UAV's the wavelength range is limited to about 1000 nm. In general, this will decrease the model performance, but our results show that this effect can largely be compensated by combining multiple observation angles. Altogether, we demonstrate that surface anisotropy influences the prediction of soil properties negatively. This effect can be reduced by combining spectra acquired under different angles. Moreover, predictions can be improved if combinations of different observation angles are used.

  11. Report on Radiocarbon Analysis of Surface Sediments from the Fore-Arc Basin of Nankai Trough

    National Research Council Canada - National Science Library

    Pohlman, John

    2004-01-01

    .... Radiocarbon analysis of the total organic carbon (TOC) and total inorganic carbon (TIC) on 30 sediment samples from two multicores and six piston cores was performed to investigate the fate of methane carbon in sediment of the Nankal Trough...

  12. Aerobic biodegradation potential of endocrine disrupting chemicals in surface-water sediment at Rocky Mountains National Park, USA

    Science.gov (United States)

    Bradley, Paul M.; Battaglin, William A.; Iwanowicz, Luke R.; Clark, Jimmy M.; Journey, Celeste

    2016-01-01

    Endocrine disrupting chemicals (EDC) in surface water and bed sediment threaten the structure and function of aquatic ecosystems. In natural, remote, and protected surface-water environments where contaminant releases are sporadic, contaminant biodegradation is a fundamental driver of exposure concentration, timing, duration, and, thus, EDC ecological risk. Anthropogenic contaminants, including known and suspected EDC, were detected in surface water and sediment collected from 2 streams and 2 lakes in Rocky Mountains National Park (ROMO). The potential for aerobic EDC biodegradation was assessed in collected sediments using 6 14C-radiolabeled model compounds. Aerobic microbial mineralization of natural (estrone and 17β-estradiol) and synthetic (17α-ethinylestradiol) estrogen was significant at all sites. ROMO bed sediment microbial communities also effectively degraded the xenoestrogens, bisphenol-A and 4-nonylphenol. The same sediment samples exhibited little potential for aerobic biodegradation of triclocarban, however, illustrating the need to assess a wider range of contaminant compounds. The current results support recent concerns over the widespread environmental occurrence of carbanalide antibacterials, like triclocarban and triclosan, and suggest that backcountry use of products containing these compounds should be discouraged.

  13. Evaluation of Near-Surface Gases in Marine Sediments to Assess Subsurface Petroleum Gas Generation and Entrapment

    Directory of Open Access Journals (Sweden)

    Michael A. Abrams

    2017-05-01

    Full Text Available Gases contained within near-surface marine sediments can be derived from multiple sources: shallow microbial activity, thermal cracking of organic matter and inorganic materials, or magmatic-mantle degassing. Each origin will display a distinctive hydrocarbon and non-hydrocarbon composition as well as compound-specific isotope signature and thus the interpretation of origin should be relatively straightforward. Unfortunately, this is not always the case due to in situ microbial alteration, non-equilibrium phase partitioning, mixing, and fractionation related to the gas extraction method. Sediment gases can reside in the interstitial spaces, bound to mineral or organic surfaces and/or entrapped in carbonate inclusions. The interstitial sediment gases are contained within the sediment pore space, either dissolved in the pore waters (solute or as free (vapour gas. The bound gases are believed to be attached to organic and/or mineral surfaces, entrapped in structured water or entrapped in authigenic carbonate inclusions. The purpose of this paper is to provide a review of the gas types found within shallow marine sediments and examine issues related to gas sampling and extraction. In addition, the paper will discuss how to recognise mixing, alteration and fractionation issues to best interpret the seabed geochemical results and determine gas origin to assess subsurface petroleum gas generation and entrapment.

  14. Distribution and sources of organic matter in surface sediments of the eastern continental margin of India

    Digital Repository Service at National Institute of Oceanography (India)

    Krishna, M.S.; Naidu, S.A.; Subbaiah, Ch.V.; Sarma, V.V.S.S.; Reddy, N.P.C.

    productivity [IGBP, 1993; Carr, 2001] and high sedimentation rate. High biological production in coastal regions is due to availability of nutrients discharged by rivers. Transport of high suspended load through river discharge results in fast... sedimentation that support better accumulation of OM in coastal sediments [Ittekkot et al., 1991]. Recent estimates revealed that world rivers transport annually about 19 x 109 tons of suspended sediment to the ocean [Milliman and Farnsworth, 2010]. Coastal...

  15. Characterizing LEDAPS surface reflectance products by comparisons with AERONET, field spectrometer, and MODIS data

    Science.gov (United States)

    Maiersperger, Tom; Scaramuzza, Pat; Leigh, Larry; Shrestha, S.; Gallo, Kevin; Jenkerson, Calli B.; Dwyer, John L.

    2013-01-01

    This study provides a baseline quality check on provisional Landsat Surface Reflectance (SR) products as generated by the U.S. Geological Survey (USGS) Earth Resources Observation and Science (EROS) Center using Landsat Ecosystem Disturbance Adaptive Processing System (LEDAPS) software. Characterization of the Landsat SR products leveraged comparisons between aerosol optical thickness derived from LEDAPS and measured by Aerosol Robotic Network (AERONET), as well as reflectance correlations with field spectrometer and Moderate Resolution Imaging Spectroradiometer (MODIS) data. Results consistently indicated similarity between LEDAPS and alternative data products in longer wavelengths over vegetated areas with no adjacent water, while less reliable performance was observed in shorter wavelengths and sparsely vegetated areas. This study demonstrates the strengths and weaknesses of the atmospheric correction methodology used in LEDAPS, confirming its successful implementation to generate Landsat SR products.

  16. Reflection of X-rays from a rough surface at extremely small grazing angles.

    Science.gov (United States)

    Wen, Mingwu; Kozhevnikov, Igor V; Wang, Zhanshan

    2015-09-21

    Peculiarities of X-ray diffraction from a rough surface at an extremely small grazing angle of an incident beam are theoretically studied. The interrelation of four diffraction channels (coherent reflectance, coherent transmittance, diffuse scattering in vacuum, and scattering into the matter depth) is analyzed for different limiting cases (large and small correlation length of roughness and large and extremely small grazing angle of incident radiation). Both the Debye-Waller and the Nevot-Croce factors are demonstrated to describe improperly the features of X-ray diffraction at extremely small grazing angles. More appropriate simple analytic expressions for the specular reflectivity and total integrated scattering in vacuum are obtained instead. Transformation of one limiting diffraction regime into another one with variation in the correlation length of roughness is discussed.

  17. Monte Carlo simulation of light reflection from cosmetic powder particles near the human skin surface.

    Science.gov (United States)

    Okamoto, Takashi; Kumagawa, Tatsuya; Motoda, Masafumi; Igarashi, Takanori; Nakao, Keisuke

    2013-06-01

    The reflection and scattering properties of light incident on human skin covered with powder particles have been investigated. A three-layer skin structure with a pigmented area is modeled, and the propagation of light in the skin's layers and in a layer of particles near the skin's surface is simulated using the Monte Carlo method. Assuming that only single scattering of light occurs in the powder layer, the simulation results show that the reflection spectra of light from the skin change with the size of powder particles. The color difference between normal and discolored skin is found to decrease considerably when powder particles with a diameter of approximately 0.25 μm are present near the skin's surface. The effects of the medium surrounding the particles, and the influence of the distribution of particle size (polydispersity), are also examined. It is shown that a surrounding medium with a refractive index close to that of the skin substantially suppresses the extreme spectral changes caused by the powder particles covering the skin surface.

  18. Mathematical Modeling of Radiant Heat Transfer in Mirror Systems Considering Deep Reflecting Surface Defects

    Directory of Open Access Journals (Sweden)

    V. V. Leonov

    2014-01-01

    Full Text Available When designing large-sized mirror concentrating systems (MCS for high-temperature solar power plants, one must have at disposal reasonably reliable and economical methods and tools, making it possible to analyze its characteristics, to predict them depending on the operation conditions and accordingly to choose the most suitable system for the solution of particular task.Experimental determination of MCS characteristics requires complicated and expensive experimentation, having significant limitations on interpretation of the results, as well as limitations imposed due to the size of the structure. Therefore it is of particular interest to develop a mathematical model capable of estimating power characteristics of MCS considering the influence of operating conditions, design features, roughness and other surface defects.For efficient solution of the tasks the model must ensure simulation of solar radiant flux as well as simulation of geometrical and optical characteristics of reflection surface and their interaction. In this connection a statistical mathematical model of radiation heat exchange based on use of Monte Carlo methods and Finite Element Method was developed and realized in the software complex, making it possible to determine main characteristics of the MCS.In this paper the main attention is given to definition of MCS radiation characteristics with account for deep reflecting surface defects (cavities, craters. Deep cavities are not typical for MCS, but their occurrence is possible during operation as a result of erosion or any physical damage. For example, for space technology it is primarily micrometeorite erosion.

  19. Influence of coffee on reflectance and chemistry of resin composite protected by surface sealant.

    Science.gov (United States)

    Soares, Luís Eduardo Silva; Cesar, Ilene Cristine Rosia; Santos, Carla Gabriela Couto; De Cardoso, Ana Luiza Merigo Oliveira; Liporoni, Priscila Christiane Suzy; Munin, Egberto; Martin, Airton Abrahão

    2007-10-01

    To assess the influence of the light-curing unit type and whether or not it was worth using surface sealant protection on resin composite restorative materials stained by coffee. Another objective was to propose the monitoring of coffee staining by FT-Raman spectroscopy using carbon-hydrogen (C-H) bonds as reference to the composite matrix degradation. Sixty cylindrical specimens of resin composite were prepared and divided into six groups: HC (control)--cured with a halogen light; LC (control) cured with a LED; HF--cured with a halogen light + Fortify Plus; LF--cured with a LED + Fortify Plus; HP--cured with a halogen light + PermaSeal; LP--cured with a LED + PermaSeal. After storage for 24 hours at 37% and 100% of relative humidity, the top surface was protected, and the other surfaces isolated. Polishing with paper discs was performed after 24 hours of curing and prior to FT-Raman spectroscopy and reflectance measurements. All specimens were submitted to coffee staining for 14 days and evaluated by both systems. Results were statistically analyzed by ANOVA and Tukey tests. FT-Raman spectrum only showed significant changes in groups LC and LP (P< 0.05). Reflectance demonstrated that staining was present in all specimens protected by sealants. Sealant staining was larger in the HF (P < 0.001) group.

  20. Distribution and sources of polycyclic aromatic hydrocarbons in surface sediments from the Bering Sea and western Arctic Ocean.

    Science.gov (United States)

    Zhao, Mengwei; Wang, Weiguo; Liu, Yanguang; Dong, Linsen; Jiao, Liping; Hu, Limin; Fan, Dejiang

    2016-03-15

    To analyze the distribution and sources of polycyclic aromatic hydrocarbons (PAHs) and evaluate their potential ecological risks, the concentrations of 16 PAHs were measured in 43 surface sediment samples from the Bering Sea and western Arctic Ocean. Total PAH (tPAH) concentrations ranged from 36.95 to 150.21 ng/g (dry weight). In descending order, the surface sediment tPAH concentrations were as follows: Canada Basin>northern Chukchi Sea>Chukchi Basin>southern Chukchi Sea>Aleutian Basin>Makarov Basin>Bering Sea shelf. The Bering Sea and western Arctic Ocean mainly received PAHs of pyrogenic origin due to pollution caused by the incomplete combustion of fossil fuels. The concentrations of PAHs in the sediments of the study areas did not exceed effects range low (ERL) values. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. Analysis in crab tissues and in sediment of estuary from Iguape (Sao Paulo, Brazil) by total reflection X-ray fluorescence

    International Nuclear Information System (INIS)

    Salvador, Marcos J.; Sawazaki, David T.A.; Zucchi, Orgheda L.A. Domingues; Vives, Ana Elisa S. de; Hattori, Gustavo Y.

    2007-01-01

    We report the use of Synchrotron Radiation Total Reflection X-Ray Fluorescence analysis (SR-TXRF) as a technique for macro, micro and trace elements determination in the tissues of the crab Ulcides cordatus and in the sediments from the Iguape estuary (Sao Paulo, Brazil) for environmental pollution control and toxicological evaluation. The analyses were performed on the U. cordatus (muscles and hepatopancreas) and on sediments from 24 sites of the Iguape estuary (Sao Paulo, Brazil). Tissues and sediments samples were analyzed by SRTXRF after digestion in an open system, using Ga as internal standard. Potassium (K), Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Sr, and Ba were the elements detected in crab hepatopancreas at concentration ranging from 0.516 (Mn) to 2061 (K) mug/g. Muscles samples presented the elements K, Ca, Ti, V, Cr, Fe, Ni, Cu, Zn, Br and Sr at concentrations ranging from 0.043 (Ni) to 1917 (K) mug/g. Potassium (K), Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Rb, Sr, Sn, Ce, and Pb were the elements detected in the sediment samples with concentration between 3.8 (Cu) and 14628 (Fe)mug/g. (author)

  2. Analysis in crab tissues and in sediment of estuary from Iguape (Sao Paulo, Brazil) by total reflection X-ray fluorescence

    Energy Technology Data Exchange (ETDEWEB)

    Salvador, Marcos J. [Universidade do Vale do Paraiba (UNIVAP), Sao Jose dos Campos, SP (Brazil)], E-mail: mjsalvador1531@yahoo.com.br; Sawazaki, David T.A.; Zucchi, Orgheda L.A. Domingues [Universidade de Sao Paulo (USP), Ribeirao Preto, SP (Brazil). Faculdade de Ciencias Farmaceuticas], E-mail: david_tatsuo@hotmail.com, E-mail: olzucchi@fcfrp.usp.br; Vives, Ana Elisa S. de [Universidade Metodista de Piracicaba (UNIMEP), Santa Barbara D' Oeste, SP (Brazil). Faculdade de Engenharia Civil, Arquitetura e Urbanismo], E-mail: aesvives@unimep.br; Hattori, Gustavo Y. [Universidade Federal do Amazonas, Benjamin Constant (Brazil). Faculdade de Ciencias Agrarias], E-mail: hattori@ufam.edu.br

    2007-07-01

    We report the use of Synchrotron Radiation Total Reflection X-Ray Fluorescence analysis (SR-TXRF) as a technique for macro, micro and trace elements determination in the tissues of the crab Ulcides cordatus and in the sediments from the Iguape estuary (Sao Paulo, Brazil) for environmental pollution control and toxicological evaluation. The analyses were performed on the U. cordatus (muscles and hepatopancreas) and on sediments from 24 sites of the Iguape estuary (Sao Paulo, Brazil). Tissues and sediments samples were analyzed by SRTXRF after digestion in an open system, using Ga as internal standard. Potassium (K), Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Sr, and Ba were the elements detected in crab hepatopancreas at concentration ranging from 0.516 (Mn) to 2061 (K) mug/g. Muscles samples presented the elements K, Ca, Ti, V, Cr, Fe, Ni, Cu, Zn, Br and Sr at concentrations ranging from 0.043 (Ni) to 1917 (K) mug/g. Potassium (K), Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Rb, Sr, Sn, Ce, and Pb were the elements detected in the sediment samples with concentration between 3.8 (Cu) and 14628 (Fe)mug/g. (author)

  3. High laser damage threshold surface relief micro-structures for anti-reflection applications

    Science.gov (United States)

    Hobbs, Douglas S.; MacLeod, Bruce D.

    2008-01-01

    Microstructures built into the surfaces of an optic or window, are an effective replacement for thin-film coatings in anti-reflection (AR) and narrow-band filter applications. AR microstructures exhibit particularly noteworthy performance where an average reflection loss of less than 0.2% over a four-octave range (400-1800nm) has been demonstrated, and a loss of less than 0.03% is routinely achieved for narrow-band applications. Because AR micro-textures provide a gradual change in the refractive index at a material boundary, it is expected that light can propagate through the boundary without material damage at energy levels that are much higher than that found with thin-film interference coatings. Recently, it was shown that the laser induced damage threshold (LIDT) of an inexpensive borosilicate glass window containing AR microstructures was nearly 57 J/cm2 at 1064nm (20ns pulse). This LIDT is two to three times greater than the damage threshold of single-layer sol-gel AR coatings on fused silica often reported in the literature. The development of surface relief AR textures for use in high-energy laser applications is presented. Data from scanning electron microscope (SEM) analysis, reflection measurements, and LIDT testing, is shown for high performance AR microstructures fabricated in fused silica, and borosilicate glass. Results of LIDT testing at wavelengths ranging from the near ultraviolet through the near infrared confirm the initial result that AR microstructures can operate at pulsed laser power levels at least two times higher than thin-film coatings. For near infrared applications such as laser weapons and fiber optic communications requiring high performance AR, LIDT levels for AR microstructures in fused silica are found to be at least five times greater than conventional multi-layer thin film coatings. An initial surface absorption test at 1064nm shows that AR microstructures may also exhibit improved lifetimes within continuous wave laser systems.

  4. Surface (sea floor) and near-surface (box cores) sediment mineralogy in Baffin Bay as a key to sediment provenance and ice sheet variations

    Science.gov (United States)

    Andrews, John T.; Eberl, D.D.

    2011-01-01

    To better understand the glacial history of the ice sheets surrounding Baffin Bay and to provide information on sediment pathways, samples from 82 seafloor grabs and core tops, and from seven box cores were subjected to quantitative X-ray diffraction weight percent (wt.%) analysis of the 2000 m) all show an abrupt drop in calcite wt.% (post-5 cal ka BP?) following a major peak in detrital carbonate (mainly dolomite). This dolomite-rich detrital carbonate (DC) event in JR175BC06 is possibly coeval with the Younger Dryas cold event. Four possible glacial-sourced end members were employed in a compositional unmixing algorithm to gain insight into down core changes in sediment provenance at the deep central basin. Estimates of the rates of sediment accumulation in the central basin are only in the range of 2 to 4 cm/cal ka, surprisingly low given the glaciated nature of the surrounding land.

  5. A Conceptual Model of Surface Reflectance Estimation for Satellite Remote Sensing Images Using in situ Reference Data

    Directory of Open Access Journals (Sweden)

    Ke-Sheng Cheng

    2012-03-01

    Full Text Available For satellite remote sensing, radiances received at the sensor are not only affected by the atmosphere but also by the topographic properties of the terrain surface. As a result, atmospheric correction alone does not yield output images that truly reflect terrain surface properties, namely surface reflectance (bidirectional reflectance factor, BRF of objects on the earth surface. Following the concept of the radiometric control area (RCA-based path radiance estimation method, we herein propose a statistical approach for surface reflectance estimation utilizing DEM data and surface reflectance of selected radiometric control areas. An algorithm for identification of shaded samples and a shape factor model were also developed in this study. The proposed RCA-based surface reflectance estimation method is capable of achieving good reflectance estimates in a region where elevation varies from 0 to approximately 600 m above the mean sea level. However, further study is recommended in order to extend the application of the proposed method to areas with substantial terrain variation.

  6. Latitudinal patterns of export production recorded in surface sediments of the Chilean Patagonian fjords (41-55°S) as a response to water column productivity

    Science.gov (United States)

    Aracena, Claudia; Lange, Carina B.; Luis Iriarte, José; Rebolledo, Lorena; Pantoja, Silvio

    2011-03-01

    The Chilean Patagonian fjords region (41-56°S) is characterized by highly complex geomorphology and hydrographic conditions, and strong seasonal and latitudinal patterns in precipitation, freshwater discharge, glacier coverage, and light regime; all of these directly affect biological production in the water column. In this study, we compiled published and new information on water column properties (primary production, nutrients) and surface sediment characteristics (biogenic opal, organic carbon, molar C/N, bulk sedimentary δ13C org) from the Chilean Patagonian fjords between 41°S and 55°S, describing herein the latitudinal pattern of water column productivity and its imprint in the underlying sediments. Based on information collected at 188 water column and 118 sediment sampling sites, we grouped the Chilean fjords into four main zones: Inner Sea of Chiloé (41° to ˜44°S), Northern Patagonia (44° to ˜47°S), Central Patagonia (48-51°S), and Southern Patagonia (Magellan Strait region between 52° and 55°S). Primary production in the Chilean Patagonian fjords was the highest in spring-summer, reflecting the seasonal pattern of water column productivity. A clear north-south latitudinal pattern in primary production was observed, with the highest average spring and summer estimates in the Inner Sea of Chiloé (2427 and 5860 mg C m -2 d -1) and Northern Patagonia (1667 and 2616 mg C m -2 d -1). This pattern was closely related to the higher availability of nutrients, greater solar radiation, and extended photoperiod during the productive season in these two zones. The lowest spring value was found in Caleta Tortel, Central Patagonia (91 mg C m -2 d -1), a site heavily influenced by glacier meltwater and river discharge loaded with glacial sediments. Biogenic opal, an important constituent of the Chilean fjord surface sediments (Si OPAL ˜1-13%), reproduced the general north-south pattern of primary production and was directly related to water column silicic

  7. Attenuated total reflectance spectroscopy of coumarin organosilane molecules adsorbed on a fused silica surface

    International Nuclear Information System (INIS)

    Bratescu, Maria Antoaneta; Saito, Nagahiro; Takai, Osamu

    2010-01-01

    Attenuated total reflectance (ATR) spectroscopy was used to investigate the adsorption of coumarin organosilane molecules onto a fused silica surface. The difference between the absorption spectra of the molecules on the surface and in solution was explained by the interaction of the adsorbed coumarin organosilane molecules with the hydroxyl groups on the fused silica surface. This interaction produces a perturbation of the π electron distribution and the electronic transitions of the coumarin chromophore of the organosilane molecules adsorbed on the surface. From the kinetics adsorption curves, the calculated enthalpy values of 74.8 ± 5.2 kJ mol -1 and free energy of -38.22 ± 0.70 kJ mol -1 at 23 deg. C indicates a chemisorption process. The high sensitivity of ATR spectroscopy allows the detection of a monolayer formed by a 10 nM concentration of coumarin organosilane molecules, which covers more than half of the maximum surface coverage at 60 deg. C.

  8. Multipitched Diffraction Gratings for Surface Plasmon Resonance-Enhanced Infrared Reflection Absorption Spectroscopy.

    Science.gov (United States)

    Petefish, Joseph W; Hillier, Andrew C

    2015-11-03

    We demonstrate the application of metal-coated diffraction gratings possessing multiple simultaneous pitch values for surface enhanced infrared absorption (SEIRA) spectroscopy. SEIRA increases the magnitude of vibrational signals in infrared measurements by one of several mechanisms, most frequently involving the enhanced electric field associated with surface plasmon resonance (SPR). While the majority of SEIRA applications to date have employed nanoparticle-based plasmonic systems, recent advances have shown how various metals and structures lead to similar signal enhancement. Recently, diffraction grating couplers have been demonstrated as a highly tunable platform for SEIRA. Indeed, gratings are an experimentally advantageous platform due to the inherently tunable nature of surface plasmon excitation at these surfaces since both the grating pitch and incident angle can be used to modify the spectral location of the plasmon resonance. In this work, we use laser interference lithography (LIL) to fabricate gratings possessing multiple pitch values by subjecting photoresist-coated glass slides to repetitive exposures at varying orientations. After metal coating, these gratings produced multiple, simultaneous plasmon peaks associated with the multipitched surface, as identified by infrared reflectance measurements. These plasmon peaks could then be coupled to vibrational modes in thin films to provide localized enhancement of infrared signals. We demonstrate the flexibility and tunability of this platform for signal enhancement. It is anticipated that, with further refinement, this approach might be used as a general platform for broadband enhancement of infrared spectroscopy.

  9. Classification of Clean and Dirty Pighouse Surfaces Based on Spectral Reflectance

    DEFF Research Database (Denmark)

    Blanke, Mogens; Braithwaite, Ian David; Zhang, Guo-Qiang

    2004-01-01

    Current pig house cleaning procedures are hazardous to the health of farm workers, and yet necessary if the spread of disease between batches of animals is to be satisfactorily controlled. Autonomous cleaning using robot technology offers salient benefits. This report addresses the feasibility...... of designing a vision based system to locate dirty areas and subsequently direct a cleaning robot to remove dirt. Novel results include the characterisation of the spectral reflectance of real surfaces and dirt in a pig house and the design of illumination to obtain discrimination of clean from dirty areas...

  10. Vertical-cavity surface-emitting laser vapor sensor using swelling polymer reflection modulation

    DEFF Research Database (Denmark)

    Ansbæk, Thor; Nielsen, Claus Højgård; Dohn, Søren

    2012-01-01

    Vapor detection using a low-refractive index polymer for reflection modulation of the top mirror in a vertical-cavity surface-emitting laser (VCSEL) is demonstrated. The VCSEL sensor concept presents a simple method to detect the response of a sensor polymer in the presence of volatile organic co...... compounds. We model the physics as a change in the top mirror loss caused by swelling of the polymer upon absorbing the target volatile organic compound. Further we show how acetone vapors at 82 000 ppm concentration can change the polymer coated VCSEL output power by 20 mu W....

  11. Soil aggregate stability and size-selective sediment transport with surface runoff as affected by organic residue amendment.

    Science.gov (United States)

    Shi, Pu; Arter, Christian; Liu, Xingyu; Keller, Martin; Schulin, Rainer

    2017-12-31

    Aggregate breakdown influences the availability of soil particles for size-selective sediment transport with surface runoff during erosive rainfall events. Organic matter management is known to affect aggregate stability against breakdown, but little is known about how this translates into rainfall-induced aggregate fragmentation and sediment transport under field conditions. In this study, we performed field experiments in which artificial rainfall was applied after pre-wetting on three pairs of arable soil plots (1.5×0.75m) six weeks after incorporating a mixture of grass and wheat straw into the topsoil of one plot in each pair (OI treatment) but not on the other plot (NI treatment). Artificial rainfall was applied for approximately 2h on each pair at an intensity of 49.1mmh -1 . In both treatments, discharge and sediment concentration in the discharge were correlated and followed a similar temporal pattern after the onset of surface runoff: After a sharp increase at the beginning both approached a steady state. But the onset of runoff was more delayed on the OI plots, and the discharge and sediment concentration were in average only roughly half as high on the OI as on the NI plots. With increasing discharge the fraction of coarse sediment increased. This relationship did not differ between the two treatments. Thus, due to the lower discharge, the fraction of fine particles in the exported sediment was larger in the runoff from the OI plots than from the NI plots. The later runoff onset and lower discharge rate was related to a higher initial aggregate stability on the OI plots. Terrestrial laser scanning proved to be a very valuable method to map changes in the micro-topography of the soil surfaces. It revealed a much less profound decrease in surface roughness on the OI than on the NI plots. Copyright © 2017 Elsevier B.V. All rights reserved.

  12. Development and applications of retro-reflective surfaces for ultrasound in LBE

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2015-07-01

    pulse or a complete absence of a reflection like a shadow. In that way, it suffices to align the sensor with the diaphragm instead of the fuel assembly which is much easier to achieve as the robotics on which the sensor is mounted move parallel with the diaphragm. The alignment requirement in the latter approach can be further relaxed by using a tiling of retro-reflectors on the lower surface of the diaphragm. In that way, alignment becomes less vital and the main source of acoustic energy loss - geometric spread of the beam - is almost completely removed, leaving only absorption losses. In this paper, we present the first results in developing a retro reflectance surface for ultrasound in LBE. We present experimental results for different designs of retro-reflectors in both water and LBE. We discuss both linear and array retro-reflectors of different sizes and investigate the influence of the main relevant ultrasonic parameters such as wavelength and spot size on the strength of the received reflection under different alignment angles. We also demonstrate how retro-reflective surfaces can be exploited when localizing objects using linear and rotating scanning methods. (authors)

  13. GPS based surface displacements – a proxy for discharge and sediment transport from the Greenland Ice Sheet

    DEFF Research Database (Denmark)

    Hasholt, Bent; Khan, Shfaqat Abbas; Mikkelsen, Andreas Bech

    2014-01-01

    The elastic respond of the Earth’s surface to mass changes has been measured with Global Positioning System (GPS). Mass loss as accumulated runoff and sediment transport from a 10000 km2 segment of the Greenland Ice Sheet (GrIS) correlated very well (R2=0.83) with GPS measured uplift. Accumulated...

  14. Spatial Evaluation of Heavy Metals Concentrations in the Surface Sediment of Taihu Lake

    Science.gov (United States)

    Niu, Yong; Jiao, Wei; Yu, Hui; Niu, Yuan; Pang, Yong; Xu, Xiangyang; Guo, Xiaochun

    2015-01-01

    With regard to the size of China’s freshwater lakes, Taihu Lake ranks third and it plays an important role in the supply of drinking water, flood prevention, farming and navigation, as well as in the travelling industry. The problem of environmental pollution has attracted widespread attention in recent years. In order to understand the levels, distribution and sources of heavy metals in sediments of Taihu Lake, random selection was carried out to obtain 59 samples of surface sediment from the entire lake and study the concentrations of Pb, Cd, Cu, Zn, Cr and Ni. Toxic units were also calculated to normalize the toxicities caused by various heavy metals. As a result, Cd and Cu in sediment were considered lower than the effect range low (ERL) at all regions where samples were gathered, while Pb and Ni were categorized into ERL-effect range median (ERM) at over 22% of the regions where samples were obtained. Nevertheless, all average concentrations of the samples were below the level of potential effect. According to the findings of this research, significant spatial heterogeneity existed in the above heavy metals. In conclusion, the distribution areas of heavy metals with higher concentrations were mainly the north bays, namely Zhushan Bay, Meiliang Bay as well as Gonghu Bay. The distribution areas of Cu, Zn, Cr and Ni with higher concentration also included the lake’s central region, whereas the uniform distribution areas of those with lower concentrations were the lake’s southeast region. In addition, it was most probable that the spatial distribution of heavy metals was determined by river inputs, whereas atmospheric precipitation caused by urban and traffic contamination also exerted considerable effects on the higher concentrations of Pb and Cd. Through evaluating the total amount of toxic units (ΣTU), it was found that higher toxicity existed primarily in the north bays and central region of the lake. If the heavy metals were sorted by the reduction of

  15. Modified polarimetric bidirectional reflectance distribution function with diffuse scattering: surface parameter estimation

    Science.gov (United States)

    Zhan, Hanyu; Voelz, David G.

    2016-12-01

    The polarimetric bidirectional reflectance distribution function (pBRDF) describes the relationships between incident and scattered Stokes parameters, but the familiar surface-only microfacet pBRDF cannot capture diffuse scattering contributions and depolarization phenomena. We propose a modified pBRDF model with a diffuse scattering component developed from the Kubelka-Munk and Le Hors et al. theories, and apply it in the development of a method to jointly estimate refractive index, slope variance, and diffuse scattering parameters from a series of Stokes parameter measurements of a surface. An application of the model and estimation approach to experimental data published by Priest and Meier shows improved correspondence with measurements of normalized Mueller matrix elements. By converting the Stokes/Mueller calculus formulation of the model to a degree of polarization (DOP) description, the estimation results of the parameters from measured DOP values are found to be consistent with a previous DOP model and results.

  16. Barium fluoride surface preparation, analysis and UV reflective coatings at Lawrence Livermore National Laboratory

    International Nuclear Information System (INIS)

    Wuest, C.R.

    1992-01-01

    Lawrence Livermore National Laboratory (LLNL) has begun a program of study on barium fluoride scintillating crystals for the Barium Fluoride Electromagnetic Calorimeter Collaboration. This program has resulted in a number of significant improvements in the mechanical processing, polishing and coating of barium fluoride crystals. Techniques have been developed using diamond-loaded pitch lapping that can produce 15 angstrom RMS surface finishes over large areas. These lapped surfaces have been shown to be crystalline using Rutherford Back-scattering (RBS). Also, special polishing fixtures have been designed based on mounting technology developed for the 1.1 m diameter optics used in LLNL's Nova Laser. These fixtures allow as many as five 25--50 cm long barium fluoride crystals to be polished and lapped at a time with the necessary tolerances for the 16,000 crystal Barium Fluoride Calorimeter. In addition, results will be presented on coating barium fluoride with UV reflective layers of magnesium fluoride and aluminum

  17. Interaction of mineral surfaces with simple organic molecules by diffuse reflectance IR spectroscopy (DRIFT)

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Joan E.; Kelley, Michael J.

    2008-06-01

    Diffuse reflectance Fourier-transform infrared spectroscopy (DRIFTS) was used to characterize multi-layers of lysine, glutamic acid and salicylic acid on -alumina and kaolinite surfaces. The results agreed well with those previously obtained by ATR-IR in aqueous media where available, indicating that DRIFT may be regarded as effectively an in-situ spectroscopy for these materials. In the case of salicylic acid adsorption onto γ-alumina, DRIFTS was used to identify monolayer coverage and to detect molecules down to coverage of 3% of a monolayer. The spectroscopic results as to coverage were confirmed by analysis of the solutions used for treatment. The spectra obtained allowed identification of changes in the bonding environment with increasing surface coverage. DRIFTS, offers several advantages in terms of materials, experimental technique and data treatment, motivating further investigations.

  18. Enhanced Group Delay of the Pulse Reflection with Graphene Surface Plasmon via Modified Otto Configuration

    Directory of Open Access Journals (Sweden)

    Guimei Li

    2017-01-01

    Full Text Available In this paper, the group delay of the transverse magnetic (TM polarized wave reflected from a modified Otto configuration with graphene surface plasmon is investigated theoretically. The findings show that the optical group delay in this structure can be enhanced negatively and can be switched from negative to positive due to the excitation of surface plasmon by graphene. It is clear that the negative group delay can be actively tuned through the Fermi energy of the graphene. Furthermore, the delay properties can also be manipulated by changing either the relaxation time of graphene or the distance between the coupling prism and the graphene. These tunable delay characteristics are promising for fabricating grapheme-based optical delay devices and other applications in the terahertz regime.

  19. Origins of terrestrial organic matter in surface sediments of the East China Sea shelf

    Science.gov (United States)

    Zhang, Hailong; Xing, Lei; Zhao, Meixun

    2017-10-01

    Terrestrial organic matter (TOM) is an important component of marine sedimentary OM, and revealing the origins and transport mechanisms of TOM to the East China Sea (ECS) is important for understanding regional carbon cycle. A novel approach combining molecular proxies and compound-specific carbon isotopes is used to quantitatively constrain the origins and transport mechanisms of TOM in surface sediments from the ECS shelf. The content of terrestrial biomarkers of (C27+C29+C31) n-alkanes (52 to 580 ng g-1) revealed a seaward decreasing trend, the δ13CTOC values (-20.6‰ to -22.7‰) were more negative near the coast, and the TMBR (terrestrial and marine biomarker ratio) values (0.06 to 0.40) also revealed a seaward decreasing trend. These proxies all indicated more TOM (up to 48%) deposition in the coastal areas. The Alkane Index, the ratio of C29/(C29+C31) n-alkanes indicated a higher proportion of grass vegetation in the coastal area; While the δ13C values of C29 n-alkane (-29.3‰ to -33.8‰) indicated that terrestrial plant in the sediments of the ECS shelf were mainly derived from C3 plants. Cluster analysis afforded detailed estimates of different-sourced TOM contributions and transport mechanisms. TOM in the Zhejiang-Fujian coastal area was mostly delivered by the Changjiang River, and characterized by higher %TOM (up to 48%), higher %C3 plant OM (68%-85%) and higher grass plant OM (56%-61%); TOM in the mid-shelf area was mostly transported by aerosols, and characterized by low %TOM (less than 17%), slightly lower C3 plant OM (56%-72%) and lower grass plant OM (49%-55%).

  20. Metal concentrations in surface water and sediments from Pardo River, Brazil: human health risks.

    Science.gov (United States)

    Alves, Renato I S; Sampaio, Carolina F; Nadal, Martí; Schuhmacher, Marta; Domingo, José L; Segura-Muñoz, Susana I

    2014-08-01

    Pardo River (Brazil) is suffering from an important anthropogenic impact due to the pressure of highly populated areas and the influence of sugarcane cultivation. The objective of the present study was to determine the levels of 13 trace elements (As, Be, Cd, Cr, Cu, Pb, Mn, Hg, Ni, Tl, Sn, V and Zn) in samples of surface water and sediments from the Pardo River. Furthermore, the human health risks associated with exposure to those metals through oral intake and dermal absorption were also evaluated. Spatial and seasonal trends of the data were closely analyzed from a probabilistic approach. Manganese showed the highest mean concentrations in both water and sediments, remarking the incidence of the agricultural activity and the geological characteristics within the basin. Thallium and arsenic were identified as two priority pollutants, being the most important contributors to the Hazard Index (HI). Since non-carcinogenic risks due to thallium exposure slightly exceeded international guidelines (HI>1), a special effort should be made on this trace element. However, the current concentrations of arsenic, a carcinogenic element, were in accordance to acceptable lifetime risks. Nowadays, there is a clear increasing growth in human population and economic activities in the Pardo River, whose waters have become a serious strategic alternative for the potential supply of drinking water. Therefore, environmental monitoring studies are required not only to assure that the current state of pollution of Pardo River does not mean a risk for the riverside population, but also to assess the potential trends in the environmental levels of those elements. Copyright © 2014 Elsevier Inc. All rights reserved.

  1. Pollution, toxicity, and ecological risk of heavy metals in surface river sediments of a large basin undergoing rapid economic development.

    Science.gov (United States)

    Tang, Wenzhong; Zhang, Chao; Zhao, Yu; Shan, Baoqing; Song, Zhixin

    2017-05-01

    A comprehensive and detailed investigation of heavy metal pollution, toxicity, and ecological risk assessment was conducted for the surface river sediments of the Haihe Basin in China based on 220 sampling sites selected in 2013. The average concentrations of Cr, Cu, Ni, Pb, and Zn in the sediments were 129 mg/kg, 63.4 mg/kg, 36.6 mg/kg, 50.0 mg/kg, and 202 mg/kg, respectively. As indicated by the geoaccumulation and pollution load indices, most surface river sediments of the Haihe Basin were contaminated with the investigated metals, especially in the junction region of the Zi Ya He and Hei Long Gang watersheds. The 5 heavy metals in the sediments all had anthropogenic sources, and the enrichment degrees followed the order Cu > Pb > Zn > Cr > Ni, with mean enrichment factors of 3.27, 2.77, 2.58, 1.81, and 1.44, respectively. According to the mean index of comprehensive potential ecological risk (38.9), the studied sediments of the Haihe Basin showed low potential ecological risk, but the sediments were potentially biologically toxic based on the mean probable effect concentration quotient (0.547), which may be the result of speciation of the 5 metals in the sediments. The results indicate that heavy metal pollution should be considered during the development of ecological restoration strategies in the Haihe Basin. Environ Toxicol Chem 2017;36:1149-1155. © 2016 SETAC. © 2016 SETAC.

  2. Accumulation of Trace Metal Elements (Cu, Zn, Cd, and Pb in Surface Sediment via Decomposed Seagrass Leaves: A Mesocosm Experiment Using Zostera marina L.

    Directory of Open Access Journals (Sweden)

    Shinya Hosokawa

    Full Text Available Accumulation of Cu, Zn, Cd, and Pb in the sediment of seagrass ecosystems was examined using mesocosm experiments containing Zostera marina (eelgrass and reference pools. Lead was approximately 20-fold higher in the surface sediment in the eelgrass pool than in eelgrass leaves and epiphytes on the eelgrass leaves, whereas zinc and cadmium were significantly lower in the surface sediment than in the leaves, with intermediate concentrations in epiphytes. Copper concentrations were similar in both the surface sediment and leaves but significantly lower in epiphytes. Carbon and nitrogen contents increased significantly with increasing δ13C in surface sediments of both the eelgrass and reference pools. Copper, Zn, Cd, and Pb also increased significantly with increasing δ13C in the surface sediment in the eelgrass pool but not in the reference pool. By decomposition of eelgrass leaves with epiphytes, which was examined in the eelgrass pool, copper and lead concentrations increased more than 2-fold and approximately a 10-fold, whereas zinc and cadmium concentrations decreased. The high copper and lead concentrations in the surface sediment result from accumulation in decomposed, shed leaves, whereas zinc and cadmium remobilized from decomposed shed leaves but may remain at higher concentrations in the leaves than in the original sediments. The results of our mesocosm study demonstrate that whether the accumulation or remobilization of trace metals during the decomposition of seagrass leaves is trace metal dependent, and that the decomposed seagrass leaves can cause copper and lead accumulation in sediments in seagrass ecosystems.

  3. Pollution characteristics and ecological risk assessment of heavy metals in the surface sediments from a source water reservoir

    Directory of Open Access Journals (Sweden)

    Changming Yang

    2016-10-01

    Full Text Available Surface sediment samples were collected from a source water reservoir in Zhejiang Province, East of China to investigate pollution characteristics and potential ecological risk of heavy metals. The BCR sequential extraction method was used to determine the four chemical fractions of heavy metals such as acid soluble, easily reducible, easily oxidizable and residual fractions. The heavy metals pollution and potential ecological risk were evaluated systematically using geoaccumulation index (Igeo and Hakanson potential ecological risk index (H′. The results showed that the sampling sites from the estuaries of tributary flowing through downtowns and heavy industrial parks showed significantly (p < 0.05 higher average concentrations of heavy metals in the surface sediments, as compared to the other sampling sites. Chemical fractionation showed that Mn existed mainly in acid extractable fraction, Cu and Pb were mainly in reducible fraction, and As existed mainly in residual fraction in the surface sediments despite sampling sites. The sampling sites from the estuary of tributary flowing through downtown showed significantly (p < 0.05 higher proportions of acid extractable and reducible fractions than the other sampling sites, which would pose a potential toxic risk to aquatic organisms as well as a potential threat to drinking water safety. As, Pb, Ni and Cu were at relatively high potential ecological risk with high Igeo values for some sampling locations. Hakanson potential ecological risk index (H′ showed the surface sediments from the tributary estuaries with high population density and rapid industrial development showed significantly (p < 0.05 higher heavy metal pollution levels and potential ecological risk in the surface sediments, as compared to the other sampling sites.

  4. Distribution of tetraether lipids in surface sediments of the northern South China Sea: Implications for TEX86 proxies

    Directory of Open Access Journals (Sweden)

    Huangmin Ge

    2013-03-01

    Full Text Available Archaea have unique glycerol dialkyl glycerol tetraether (GDGT lipids that can be used to develop paleotemperature proxies such as TEX86. This research is to validate proposed GDGT-proxies for paleotemperature determination in the South China Sea (SCS. Samples were collected from core-top sediments (0–5 cm in the northern SCS. Total lipids were extracted to obtain core GDGTs, which were identified and quantified using liquid chromatography-mass spectrometry (LC-MS. The abundance of isoprenoidal GDGTs (iGDGTs ranged from 271.5 ng/g dry sediment to 1266.3 ng/g dry sediment, whereas the branched GDGTs (bGDGTs, supposedly derived from terrestrial sources, ranged from 22.2 ng/g dry sediment to 56.7 ng/g dry sediment. The TEX86-derived sea surface temperatures ranged from 20.9 °C in the coast (water depth  1000 m. TEX86-derived temperatures near shore (<160 m water depth averaged 23.1 ± 2.5 °C (n = 4, which were close to the satellite-derived winter mean sea surface temperature (average 22.6 ± 1.0 °C, n = 4; whereas the TEX86-derived temperatures offshore averaged 27.4 ± 0.3 °C (n = 7 and were consistent with the satellite mean annual sea surface temperature (average 26.8 ± 0.4 °C, n = 7. These results suggest that TEX86 may record the sea surface mean annual temperature in the open ocean, while it likely records winter sea surface temperature in the shallower water.

  5. Characterization of the intragranular water regime within subsurface sediments: pore volume, surface area, and mass transfer limitations

    Science.gov (United States)

    Hay, Michael B.; Stoliker, Deborah L.; Davis, James A.; Zachara, John M.

    2011-01-01

    Although "intragranular" pore space within grain aggregates, grain fractures, and mineral surface coatings may contain a relatively small fraction of the total porosity within a porous medium, it often contains a significant fraction of the reactive surface area, and can thus strongly affect the transport of sorbing solutes. In this work, we demonstrate a batch experiment procedure using tritiated water as a high-resolution diffusive tracer to characterize the intragranular pore space. The method was tested using uranium-contaminated sediments from the vadose and capillary fringe zones beneath the former 300A process ponds at the Hanford site (Washington). Sediments were contacted with tracers in artificial groundwater, followed by a replacement of bulk solution with tracer-free groundwater and the monitoring of tracer release. From these data, intragranular pore volumes were calculated and mass transfer rates were quantified using a multirate first-order mass transfer model. Tritium-hydrogen exchange on surface hydroxyls was accounted for by conducting additional tracer experiments on sediment that was vacuum dried after reaction. The complementary ("wet" and "dry") techniques allowed for the simultaneous determination of intragranular porosity and surface area using tritium. The Hanford 300A samples exhibited intragranular pore volumes of ~1% of the solid volume and intragranular surface areas of ~20%–35% of the total surface area. Analogous experiments using bromide ion as a tracer yielded very different results, suggesting very little penetration of bromide into the intragranular porosity.

  6. Improved Near-surface Velocity Models from Waveform Tomography Applied to Vibroseis MCS Reflection Data

    Science.gov (United States)

    Smithyman, B.; Clowes, R. M.

    2009-12-01

    Multichannel vibroseis reflection surveys are prevalent in the land exploration seismic industry because of benefits in speed and cost, along with reduced environmental impact when compared to explosive sources. Since the downgoing energy must travel through the shallow subsurface, an improved model of near-surface velocity can in theory substantially improve the resolution of deeper reflections. We describe techniques aimed at allowing the use of vibroseis data for long-offset refraction processing of first-arrival traveltimes and waveforms. Refraction processing of surface vibroseis data is typically limited to near-offset refraction statics. Velocity models of the shallow subsurface can be built to facilitate CDP stacking and migration, but these models are typically coarse and of limited use for interpretation. Waveform tomography combines inversion of first-arrival traveltime data with full waveform inversion of densely-sampled refracted arrivals. Since inversion of the waveform amplitude and phase is not limited by the ray-theory approximation, identification of low-velocity zones and small scattering targets is possible. Incorporating a wide range of offsets is critical for a more complete characterization of the near-surface. Because of the use of a non-linear frequency-domain approach to the solution of this inverse problem, low data frequencies are important in comparison with conventional reflection processing. Through the use of waveform tomography, we plan to build useful, detailed near-surface velocity models for both the reflection work flow and direct interpretation. Several difficulties exist in first-arrival analysis and waveform inversion of vibroseis data. The mixed-phase vibroseis source signature exhibits variations in phase with offset that are difficult to quantify without detailed a priori knowledge of the near-surface. This causes difficulties with picking and initial model building, which is critical for non-linear waveform inversion. A

  7. Estimation of Melt Ponds over Arctic Sea Ice using MODIS Surface Reflectance Data

    Science.gov (United States)

    Ding, Y.; Cheng, X.; Liu, J.

    2017-12-01

    Melt ponds over Arctic sea ice is one of the main factors affecting variability of surface albedo, increasing absorption of solar radiation and further melting of snow and ice. In recent years, a large number of melt ponds have been observed during the melt season in Arctic. Moreover, some studies have suggested that late spring to mid summer melt ponds information promises to improve the prediction skill of seasonal Arctic sea ice minimum. In the study, we extract the melt pond fraction over Arctic sea ice since 2000 using three bands MODIS weekly surface reflectance data by considering the difference of spectral reflectance in ponds, ice and open water. The preliminary comparison shows our derived Arctic-wide melt ponds are in good agreement with that derived by the University of Hamburg, especially at the pond distribution. We analyze seasonal evolution, interannual variability and trend of the melt ponds, as well as the changes of onset and re-freezing. The melt pond fraction shows an asymmetrical growth and decay pattern. The observed melt ponds fraction is almost within 25% in early May and increases rapidly in June and July with a high fraction of more than 40% in the east of Greenland and Beaufort Sea. A significant increasing trend in the melt pond fraction is observed for the period of 2000-2017. The relationship between melt pond fraction and sea ice extent will be also discussed. Key Words: melt ponds, sea ice, Arctic

  8. Collection and corrections of oblique multiangle hyperspectral bidirectional reflectance imagery of the water surface

    Science.gov (United States)

    Bostater, Charles R.; Oney, Taylor S.

    2017-10-01

    Hyperspectral images of coastal waters in urbanized regions were collected from fixed platform locations. Surf zone imagery, images of shallow bays, lagoons and coastal waters are processed to produce bidirectional reflectance factor (BRF) signatures corrected for changing viewing angles. Angular changes as a function of pixel location within a scene are used to estimate changes in pixel size and ground sampling areas. Diffuse calibration targets collected simultaneously from within the image scene provides the necessary information for calculating BRF signatures of the water surface and shorelines. Automated scanning using a pushbroom hyperspectral sensor allows imagery to be collected on the order of one minute or less for different regions of interest. Imagery is then rectified and georeferenced using ground control points within nadir viewing multispectral imagery via image to image registration techniques. This paper demonstrates the above as well as presenting how spectra can be extracted along different directions in the imagery. The extraction of BRF spectra along track lines allows the application of derivative reflectance spectroscopy for estimating chlorophyll-a, dissolved organic matter and suspended matter concentrations at or near the water surface. Imagery is presented demonstrating the techniques to identify subsurface features and targets within the littoral and surf zones.

  9. Spectrally adjusted surface reflectance and its dependence with NDVI for Landsat and Sentinel 2

    Science.gov (United States)

    Villaescusa, J. L.; Franch, B.; Roger, J. C.; Vermote, E.; Justice, C. O.

    2017-12-01

    Cross-calibration between sensors is necessary to bring measurements to a common radiometric scale; it allows a more complete monitoring of land surface processes and enhances data continuity and harmonization. However, differences in the Relative Spectral Response (RSR) of sensors generate uncertainties in the process (Teillet et al., 2004). For this reason, compensating for these differences is of great importance and can be achieved by using a spectral band adjustment factor (SBAF), which establishes a relationship between two spectrally adjusted bands. Nonetheless, this relationship has been shown to depend greatly on the surface's NDVI (Trishchenko et al., 2002) and therefore needs to be corrected. In this work, we use the Sentinel 2 and Landsat sensor's RSRs for both the Red and NIR bands to find the most accurate metric towards performing said relationship, and use surface reflectance spectral libraries with a wide variety of classes that include NDVI values ranging from -0.1 to 1 to analyze its dependence. We compute a quadratic fit of the metric used vs the surface's NDVI and propose an adjusted correction equation dependent on the NDVI value for both bands of all Landsat and Sentinel 2 sensors. Key words: Radiometric calibration, RSR, Spectral Adjustment, Landsat, Sentinel 2.

  10. [Speciation and Risk Assessment of Heavy Metals in Surface Sediments from the Heavily Polluted Area of Xiaoqing River].

    Science.gov (United States)

    Huang, Ying; Li, Yong-xia; Gao, Fu-wei; Xu, Min-min; Sun, Bo; Wang, Ning; Yang, Jian

    2015-06-01

    Th concentrations of Cu, As, Pb, Zn, Cr, Cd, Ni in interstitial water were analyzed by ICP-MS from the heavily polluted area of Xiaoqing River. A modified BCR's sequential extraction procedure was used to investigate the fraction of the heavy metals in the surface sediments. The aquatic toxicity of heavy metals in interstitial water was assessed by US Water Quality Criteria (CCC, CMC). Based on the speciation of the metals in the surface sediments, the ecological risk of heavy metals was assessed with methods of risk assessment code (RAC) and potential ecological risk index. The results showed that: The tested heavy metals would not pose chronic toxicity for aquatic ecosystem. The contents of heavy metals (Cu, Pb, Zn, Cr, Cd, Ni) in the surface sediments were higher than the background values of the local soils, indicating enrichment of heavy metals. Cu, As and Ni were mainly composed with residual fractions, Pb and Cr were mainly constituted of residual and oxidizable fractions, and mass fractions of Zn and Cd existed mainly in acid soluble and reducible factions. The contents of bio-available fractions of Cd, Zn, Cr and Pb in the sediments were higher those of residual fractions, indicating high potential for secondary release. Based on calculation of RAC method, Cu, Pb, Cr and As posed extremely low to low risk to the environment. Accordingly, Ni was of low to medium risk, Cd was of medium to high risk, and Zn was of medium to extremely high risk to the environment. The potential ecological risk of heavy metals in the sediments was in the descending order of Cd > Zn > Ni > As > Cu > Cr > Pb. Cd had high to very high potential ecological risk comparing with the other heavy metals. The potential ecological risk indexes (RI) of the heavy metals in the sediments were in the range of 136.83-264.83, and posed medium to high potential ecological risks for Xiaoqing River.

  11. Airborne hyperspectral observations of surface and cloud directional reflectivity using a commercial digital camera

    Directory of Open Access Journals (Sweden)

    A. Ehrlich

    2012-04-01

    Full Text Available Spectral radiance measurements by a digital single-lens reflex camera were used to derive the directional reflectivity of clouds and different surfaces in the Arctic. The camera has been calibrated radiometrically and spectrally to provide accurate radiance measurements with high angular resolution. A comparison with spectral radiance measurements with the Spectral Modular Airborne Radiation measurement sysTem (SMART-Albedometer showed an agreement within the uncertainties of both instruments (6% for both. The directional reflectivity in terms of the hemispherical directional reflectance factor (HDRF was obtained for sea ice, ice-free ocean and clouds. The sea ice, with an albedo of ρ = 0.96 (at 530 nm wavelength, showed an almost isotropic HDRF, while sun glint was observed for the ocean HDRF (ρ = 0.12. For the cloud observations with ρ = 0.62, the cloudbow – a backscatter feature typically for scattering by liquid water droplets – was covered by the camera. For measurements above heterogeneous stratocumulus clouds, the required number of images to obtain a mean HDRF that clearly exhibits the cloudbow has been estimated at about 50 images (10 min flight time. A representation of the HDRF as a function of the scattering angle only reduces the image number to about 10 (2 min flight time.

    The measured cloud and ocean HDRF have been compared to radiative transfer simulations. The ocean HDRF simulated with the observed surface wind speed of 9 m s−1 agreed best with the measurements. For the cloud HDRF, the best agreement was obtained by a broad and weak cloudbow simulated with a cloud droplet effective radius of Reff = 4 μm. This value agrees with the particle sizes derived from in situ measurements and retrieved from the spectral radiance of the SMART-Albedometer.

  12. Motion of cells sedimenting on a solid surface in a laminar shear flow.

    Science.gov (United States)

    Tissot, O; Pierres, A; Foa, C; Delaage, M; Bongrand, P

    1992-01-01

    Cell adhesion often occurs under dynamic conditions, as in flowing blood. A quantitative understanding of this process requires accurate knowledge of the topographical relationships between the cell membrane and potentially adhesive surfaces. This report describes an experimental study made on both the translational and rotational velocities of leukocytes sedimenting of a flat surface under laminar shear flow. The main conclusions are as follows: (a) Cells move close to the wall with constant velocity for several tens of seconds. (b) The numerical values of translational and rotational velocities are inconsistent with Goldman's model of a neutrally buoyant sphere in a laminar shear flow, unless a drag force corresponding to contact friction between cells and the chamber floor is added. The phenomenological friction coefficient was 7.4 millinewton.s/m. (c) Using a modified Goldman's theory, the width of the gap separating cells (6 microns radius) from the chamber floor was estimated at 1.4 micron. (d) It is shown that a high value of the cell-to-substrate gap may be accounted for by the presence of cell surface protrusions of a few micrometer length, in accordance with electron microscope observations performed on the same cell population. (e) In association with previously reported data (Tissot, O., C. Foa, C. Capo, H. Brailly, M. Delaage, and P. Bongrand. 1991. Biocolloids and Biosurfaces. In press), these results are consistent with the possibility that cell-substrate attachment be initiated by the formation of a single molecular bond, which might be considered as the rate limiting step.

  13. Surface erosion and sedimentation caused by ejecta from the lunar crater Tycho

    Science.gov (United States)

    Shkuratov, Y.; Basilevsky, A.; Kaydash, V.; Ivanov, B.; Korokhin, V.; Videen, G.

    2018-02-01

    We use Kaguya MI images acquired at wavelengths 415, 750, and 950 nm to map TiO2 and FeO content and the parameter of optical maturity OMAT in lunar regions Lubiniezky E and Taurus-Littrow with a spatial resolution of 20 m using the Lucey method [Lucey et al., JGR 2000, 105. 20,297]. We show that some ejecta from large craters, such as Tycho and Copernicus may cause lunar surface erosion, transportation of the eroded material and its sedimentation. The traces of the erosion resemble wind tails observed on Earth, Mars, and Venus, although the Moon has no atmosphere. The highland material of the local topographic prominences could be mobilized by Tycho's granolometrically fine ejecta and caused by its transportation along the ejecta way to adjacent mare areas and subsequent deposition. The tails of mobilized material reveal lower abundances of Ti and Fe than the surrounding mare surface. We have concluded that high-Ti streaks also seen in the Lubiniezky E site, which show unusual combinations of the TiO2 and FeO content on the correlation diagram, could be the result of erosion by Tycho's ejecta too. In these locations, Tycho's material did not form a consolidated deposit, but resulted in erosion of the mare surface material that became intermixed, consequently, diluting the ejecta. The Taurus-Littrow did provide evidence of the mechanical effect of Tycho's ejecta on the local landforms (landslide, secondary craters) and do not show the compositional signature of Tycho's ejecta probably due to intermixing with local materials and dilution.

  14. Reference-free total reflection X-ray fluorescence analysis of semiconductor surfaces with synchrotron radiation.

    Science.gov (United States)

    Beckhoff, Burkhard; Fliegauf, Rolf; Kolbe, Michael; Müller, Matthias; Weser, Jan; Ulm, Gerhard

    2007-10-15

    Total reflection X-ray fluorescence (TXRF) analysis is a well-established method to monitor lowest level contamination on semiconductor surfaces. Even light elements on a wafer surface can be excited effectively when using high-flux synchrotron radiation in the soft X-ray range. To meet current industrial requirements in nondestructive semiconductor analysis, the Physikalisch-Technische Bundesanstalt (PTB) operates dedicated instrumentation for analyzing light element contamination on wafer pieces as well as on 200- and 300-mm silicon wafer surfaces. This instrumentation is also suited for grazing incidence X-ray fluorescence analysis and conventional energy-dispersive X-ray fluorescence analysis of buried and surface nanolayered structures, respectively. The most prominent features are a high-vacuum load-lock combined with an equipment front end module and a UHV irradiation chamber with an electrostatic chuck mounted on an eight-axis manipulator. Here, the entire surface of a 200- or a 300-mm wafer can be scanned by monochromatized radiation provided by the plane grating monochromator beamline for undulator radiation in the PTB laboratory at the electron storage ring BESSY II. This beamline provides high spectral purity and high photon flux in the range of 0.078-1.86 keV. In addition, absolutely calibrated photodiodes and Si(Li) detectors are used to monitor the exciting radiant power respectively the fluorescence radiation. Furthermore, the footprint of the excitation radiation at the wafer surface is well-known due to beam profile recordings by a CCD during special operation conditions at BESSY II that allow for drastically reduced electron beam currents. Thus, all the requirements of completely reference-free quantitation of TXRF analysis are fulfilled and are to be presented in the present work. The perspectives to arrange for reference-free quantitation using X-ray tube-based, table-top TXRF analysis are also addressed.

  15. Caustic envelopes and cusp coordinates due to the reflection of a spherical wave from a layered sediment

    NARCIS (Netherlands)

    Ainslie, M.A.; Robins, A.J.; Simons, D.G.

    2004-01-01

    A compilation of analytical formulas is presented, describing ray properties of a family of sediment sound speed profiles. The profiles are described as "generalized power law" profiles because they are generalizations of a similar family of simpler power law profiles considered in earlier work [M.

  16. Role of urban surface roughness in road-deposited sediment build-up and wash-off

    Science.gov (United States)

    Zhao, Hongtao; Jiang, Qian; Xie, Wenxia; Li, Xuyong; Yin, Chengqing

    2018-05-01

    Urban road surface roughness is one of the most important factors in estimation of surface runoff loads caused by road-deposited sediment (RDS) wash-off and design of its control measures. However, because of a lack of experimental data to distinguish the role of surface roughness, the effects of surface roughness on RDS accumulation and release are not clear. In this study, paired asphalt and concrete road surfaces and rainfall simulation designs were used to distinguish the role of surface roughness in RDS build-up and wash-off. Our results showed that typical asphalt surfaces often have higher depression depths than typical concrete surfaces, indicating that asphalt surfaces are relatively rougher than concrete surface. Asphalt surfaces can retain a larger RDS amount, relative higher percentage of coarser particles, larger RDS wash-off loads, and lower wash-off percentage, than concrete surfaces. Surface roughness has different effects in RDS motilities with different particle sizes during rainfall runoff, and the settleable particles (44-149 μm) were notably influenced by it. Furthermore, the first flush phenomenon tended to be greater on relatively smooth surfaces than relatively rough surfaces. Overall, surface roughness plays an important role in influencing the complete process of RDS build-up and wash-off on different road characteristics.

  17. Ecological Screening Values for Surface Water, Sediment, and Soil: 2005 Update

    Energy Technology Data Exchange (ETDEWEB)

    Friday, G. P.

    2005-07-18

    One of the principal components of the environmental remediation program at the Savannah River Site (SRS) is the assessment of ecological risk. Used to support CERCLA, RCRA, and DOE orders, the ecological risk assessment (ERA) can identify environmental hazards and evaluate remedial action alternatives. Ecological risk assessment is also an essential means for achieving DOE's risk based end state vision for the disposition of nuclear material and waste hazards, the decommissioning of facilities, and the remediation of inactive waste units at SRS. The complexity of an ERA ranges from a screening level ERA (SLERA) to a full baseline ERA. A screening level ecological risk assessments, although abbreviated from a baseline risk assessment, is nonetheless considered a complete risk assessment (EPA, 2001a). One of the initial tasks of any ERA is to identify constituents that potentially or adversely affect the environment. Typically, this is accomplished by comparing a constituent's maximum concentration in surface water, sediment, or soil with an ecological screening value (ESV). The screening process can eliminate many constituents from further consideration in the risk assessment, but it also identifies those that require additional evaluation. This document is an update of a previous compilation (Friday, 1998) and provides a comprehensive listing of ecological screening values for surface water, sediment, and soil. It describes how the screening values were derived and recommends benchmarks that can be used for ecological risk assessment. The sources of these updated benchmarks include the U.S. Environmental Protection Agency (EPA), U.S. Fish and Wildlife Service (USFWS), U.S. Geological Survey (USGS), National Oceanic and Atmospheric Administration (NOAA), Oak Ridge National Laboratory (ORNL), the State of Florida, the Canadian Council of Ministers of the Environment (CCME), the Dutch Ministry of the Environment (RIVM), and the scientific literature. It

  18. LBA-ECO CD-34 Hyperion 30-m Surface Reflectance, Amazon Basin: 2002-2005

    Data.gov (United States)

    National Aeronautics and Space Administration — ABSTRACT: This data set contains 20 multispectral surface reflectance images collected by the EO-1 satellite Hyperion sensor at 30-m resolution and covering the...

  19. OMI/Aura Surface Reflectance Climatology Level 3 Global 0.5deg Lat/Lon Grid V003

    Data.gov (United States)

    National Aeronautics and Space Administration — The OMI Earth Surface Reflectance Climatology product, OMLER (Global 0.5deg Lat/Lon grid) which is based on Version 003 Level-1B top of atmosphere upwelling radiance...

  20. CLPX-Satellite: EO-1 Hyperion Surface Reflectance, Snow-Covered Area, and Grain Size, Version 1

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set consists of apparent surface reflectance, subpixel snow-covered area, and grain size collected from the Hyperion hyperspectral imager. The Hyperion...

  1. MODIS/Aqua Surface Reflectance Daily L2G Global 1km and 500m SIN Grid V006

    Data.gov (United States)

    National Aeronautics and Space Administration — The MYD09GA Version 6 product provides an estimate of the surface spectral reflectance of AQUA MODIS Bands 1-7 corrected for atmospheric conditions such as gasses,...

  2. MODIS/Terra Surface Reflectance Daily L2G Global 1km and 500m SIN Grid V006

    Data.gov (United States)

    National Aeronautics and Space Administration — The MOD09GA Version 6 product provides an estimate of the surface spectral reflectance of Terra MODIS Bands 1-7 corrected for atmospheric conditions such as gasses,...

  3. Bacterial biodiversity in deep-sea sediments from two regions of contrasting surface water productivity near the Crozet Islands, Southern Ocean

    Science.gov (United States)

    Jamieson, R. E.; Heywood, J. L.; Rogers, A. D.; Billett, D. S. M.; Pearce, D. A.

    2013-05-01

    The relationship between surface-derived particulate organic matter (POM) and deep-sea sediment bacterial abundance, community structure and composition was investigated in two different sediment layers from two zones of contrasting surface water productivity in the southern Indian Ocean. Bacterial sediment communities from high chlorophyll (HC) and low chlorophyll (LC) sites were characterized and compared using direct counts, clone library construction, denaturing gradient gel electrophoresis (DGGE) and fluorescence in situ hybridization (FISH). Of the 1566 bacterial clones generated from the sediment communities, 1010 matched published 16S rDNA sequences at ≥97% identity. A comparison of surface sediment clone libraries showed that at least one third of all identified operational taxonomic units (OTUs) were common to both HC and LC sites. DGGE community profiles were consistent (82% similar) and evenness of the major phylogenetic groups was 96% similar between surface sediment communities, where gamma- and alpha-Proteobacteria were dominant. Sediment communities shared similarly high biodiversity, while species richness was marginally higher at the LC site. Intra-site shifts in bacterial abundance and composition were observed with increasing sediment depth. Despite the differences in organic matter input between sites, the consistency observed between HC and LC sediment communities pointed to (1) the extent of remineralisation by mega and meio-fauna as a potential factor affecting the quantity and quality of POM available to sediment bacteria, (2) sampling during the early 'nutrient assimilation phase' of the bacterial response to freshly deposited POM or (3) that the action of bacteria in the water column could affect the quantity and quality of POM available to sediment bacteria. Although factors other than these may explain the observed similarities, this first comparison of such deep-sea sediment communities in relation to surface-derived productivity may

  4. Plasma surface reflectance spectroscopy for non-invasive and continuous monitoring of extracellular component of blood

    Science.gov (United States)

    Sakota, Daisuke; Takatani, Setsuo

    2012-04-01

    To achieve the quantitative optical non-invasive diagnosis of blood during extracorporeal circulation therapies, the instrumental technique to extract extracellular spectra from whole blood was developed. In the circuit, the continuous blood flow was generated by a centrifugal blood pump. The oxygen saturation was maintained 100% by an oxygenator. The developed glass optical flow cell was attached to the outlet tubing of the oxygenator. The halogen lamp including the light from 400 to 900 nm wavelength was used for the light source. The light was guided into an optical fiber. The light emitted by the fiber was collimated and emitted to the flow cell flat surface at the incident angle of 45 degrees. The light just reflected on the boundary between inner surface of the flow cell and plasma at 45 degrees was detected by the detection fiber. The detected light was analyzed by a spectral photometer. The obtained spectrum from 400 to 600nm wavelength was not changed with respect to the hematocrit. In contrast, the signal in the spectral range was changed when the plasma free hemoglobin increased. By using two spectral range, 505+/-5 nm and 542.5+/-2.5 nm, the differential spectrum was correlated with the free hemoglobin at R2=0.99. On the other hand, as for the hematocrit, the differential spectrum was not correlated at R2=0.01. Finally, the plasma free hemoglobin was quantified with the accuracy of 22+/-19mg/dL. The result shows that the developed plasma surface reflectance spectroscopy (PSRS) can extract the plasma spectrum from flowing whole blood.

  5. A prototype for automation of land-cover products from Landsat Surface Reflectance Data Records

    Science.gov (United States)

    Rover, J.; Goldhaber, M. B.; Steinwand, D.; Nelson, K.; Coan, M.; Wylie, B. K.; Dahal, D.; Wika, S.; Quenzer, R.

    2014-12-01

    Landsat data records of surface reflectance provide a three-decade history of land surface processes. Due to the vast number of these archived records, development of innovative approaches for automated data mining and information retrieval were necessary. Recently, we created a prototype utilizing open source software libraries for automatically generating annual Anderson Level 1 land cover maps and information products from data acquired by the Landsat Mission for the years 1984 to 2013. The automated prototype was applied to two target areas in northwestern and east-central North Dakota, USA. The approach required the National Land Cover Database (NLCD) and two user-input target acquisition year-days. The Landsat archive was mined for scenes acquired within a 100-day window surrounding these target dates, and then cloud-free pixels where chosen closest to the specified target acquisition dates. The selected pixels were then composited before completing an unsupervised classification using the NLCD. Pixels unchanged in pairs of the NLCD were used for training decision tree models in an iterative process refined with model confidence measures. The decision tree models were applied to the Landsat composites to generate a yearly land cover map and related information products. Results for the target areas captured changes associated with the recent expansion of oil shale production and agriculture driven by economics and policy, such as the increase in biofuel production and reduction in Conservation Reserve Program. Changes in agriculture, grasslands, and surface water reflect the local hydrological conditions that occurred during the 29-year span. Future enhancements considered for this prototype include a web-based client, ancillary spatial datasets, trends and clustering algorithms, and the forecasting of future land cover.

  6. 30-m Land Surface Albedo by Integrating Landsat directional reflectance and MODIS anisotropic information

    Science.gov (United States)

    Shuai, Y.; Masek, J. G.; Gao, F.; Schaaf, C.; Williams, C. A.; Wang, Z.

    2012-12-01

    Land surface albedo as a key physical variable determining the solar energy absorbed by the land surface, and can affect climate through ecosystem feedback processes. Some studies have highlighted that positive radiative forcing (warming) induced by increased forest cover and decreased albedo in temperate and boreal forest regions could offset the negative forcing expected from carbon sequestration (Betts 2000). However, these studies have not used data at the spatial resolution of human land dynamics (e.g. 30m Landsat resolution). Therefore, there is a need for improved estimates of land surface albedo at high resolution to fully understand the role of land cover change in climate forcing and carbon cycle. Following our initial "concurrent" approach applied to Landsat data acquired during the post-2000 MODIS era (Shuai et al.2011), we have developed a "pre-MODIS era" approach to generate 30-meter albedos using Landsat surface directional reflectance (1970s-2000) and Look-Up-Tables (LUT) of anisotropy information extracted from MODIS BRDF data. We use a NLCD (National Land Cover Dataset)-class-based LUT for non-disturbed land cover. Disturbed forest patches are identified from the Monitoring Trends in Burn Severity (MTBS) and North American Forest Dynamics (NAFD) datasets. For each category, high quality MODIS BRDF parameters (MCD43A1 product) are retrieved and used to populate the LUT. Each entry in the LUT reflects a unique combination of land cover type, disturbance age and type, season/month, and sensor bands. The initial BRDF LUT generated for the Pacific Northwest of the United States exhibits various BRDF evolution trajectories for disturbed classes, including different recovery trajectories for fire and non-fire disturbance. The albedo-to-nadir-ratio method (Shuai et al., 2011) is applied to the BRDF LUT to calculate spectral albedos, followed by a narrow-to-broadband conversion (Liang 2000) to generate broad-band shortwave albedo. Our preliminary

  7. X-ray Reflectivity Study of Ionic Liquids at Electrified Surfaces

    Science.gov (United States)

    Chu, Miaoqi

    X-ray reflectivity (XRR) versatile technique that characterize the surface structures. However, due to the lack of phase information of X-ray data, the reconstruction of electron density profile (EDP) from XRR data is an ill-posed inverse problem that requires extra attention. In Chapter 1, several key concepts in XRR data analysis are reviewed. The typical XRR data acquisition procedure and methods of modeling electron density are introduced. The widely used logarithm form of merit function is justified with mathematical deduction and numerical experiment. A scheme that generates artificial reflectivity data with theoretical statistical error but not systematical error is proposed. With the methods and schemes described in Chapter 1, simulated reflectivity data of a simple one-slab model is generated and fitted to test the efficient of EDP reconstruction. By isolating the parameters, the effects of slab width, electron density contrast and maximal wave transfer are studied individually. It?s demonstrated that best-fit/global minima, result reported by most XRR studies, don?t necessary reflect the real EDP. By contrast, mapping the merit function in the parametric space can capture much more details. Additionally, the widely accepted concept about the XRR theoretical spatial resolution (pi/q_{max}) as well the using Patterson function are brought to test. In the perspective of XRR data analysis, this chapter puts forward general rules to design and optimize XRR experiments. It also demonstrates how susceptible the fitting result will be if it?s not done carefully. In Chapter 3, the interface between hydrophobic OTS film and several solvents is studied with XRR in a transmission-cell setup. The solvents, from water, acetone, to alcohol (methanol, ethanol, 1-propanol), to alkane (pentane, hexane and heptane), vary significantly in terms of polarity and hydrogen bonding. However, the XRR data from different solvents are subtle. The methods and principles elicited in

  8. Neutron reflectivity study of substrate surface chemistry effects on supported phospholipid bilayer formation on (1120) sapphire.

    Energy Technology Data Exchange (ETDEWEB)

    Oleson, Timothy A. [University of Wisconsin, Madison; Sahai, Nita [University of Akron; Wesolowski, David J [ORNL; Dura, Joseph A [ORNL; Majkrzak, Charles F [ORNL; Giuffre, Anthony J. [University of Wisconsin, Madison

    2012-01-01

    Oxide-supported phospholipid bilayers (SPBs) used as biomimetric membranes are significant for a broad range of applications including improvement of biomedical devices and biosensors, and in understanding biomineralization processes and the possible role of mineral surfaces in the evolution of pre-biotic membranes. Continuous-coverage and/or stacjed SPBs retain properties (e.,g. fluidity) more similar to native biological membranes, which is desirable for most applications. Using neutron reflectivity, we examined face coverage and potential stacking of dipalmitoylphosphatidylcholine (DPPC) bilayers on the (1120) face of sapphire (a-Al2O3). Nearly full bilayers were formed at low to neutral pH, when the sapphire surface is positively charged, and at low ionic strength (l=15 mM NaCl). Coverage decreased at higher pH, close to the isoelectric point of sapphire, and also at high I>210mM, or with addition of 2mM Ca2+. The latter two effects are additive, suggesting that Ca2+ mitigates the effect of higher I. These trends agree with previous results for phospholipid adsorption on a-Al2O3 particles determined by adsorption isotherms and on single-crystal (1010) sapphire by atomic force microscopy, suggesting consistency of oxide surface chemistry-dependent effects across experimental techniques.

  9. Different size biomolecules anchoring on porous silicon surface: fluorescence and reflectivity pores infiltration comparative studies

    Energy Technology Data Exchange (ETDEWEB)

    Giovannozzi, Andrea M.; Rossi, Andrea M. [National Institute for Metrological Research, Thermodynamic Division, Strada delle Cacce 91, 10135 Torino (Italy); Renacco, Chiara; Farano, Alessandro [Ribes Ricecrhe Srl, Via Lavoratori Vittime del Col du Mont 24, 11100 Aosta (Italy); Derosas, Manuela [Biodiversity Srl, Via Corfu 71, 25124 Brescia (Italy); Enrico, Emanuele [National Institute for Metrological Research, Electromagnetism Division, Strada delle Cacce 91, 10135 Torino (Italy)

    2011-06-15

    The performance of porous silicon optical based biosensors strongly depends on material nanomorphology, on biomolecules distribution inside the pores and on the ability to link sensing species to the pore walls. In this paper we studied the immobilization of biomolecules with different size, such as antibody anti aflatoxin (anti Aflatox Ab, {proportional_to}150 KDa), malate dehydrogenase (MDH, {proportional_to}36KDa) and metallothionein (MT, {proportional_to}6KDa) at different concentrations on mesoporous silicon samples ({proportional_to}15 nm pores diameter). Fluorescence measurements using FITC- labeled biomolecules and refractive index analysis based on reflectivity spectra have been employed together to detect the amount of proteins bound to the surface and to evaluate their diffusion inside the pores. Here we suggest that these two techniques should be used together to have a better understanding of what happens at the porous silicon surface. In fact, when pores dimensions are not perfectly tuned to the protein size a higher fluorescence signal doesn't often correspond to a higher biomolecules distribution inside the pores. When a too much higher concentration of biomolecule is anchored on the surface, steric crowd effects and repulsive interactions probably take over and hinder pores infiltration, inducing a small or absent shift in the fringe pattern even if a higher fluorescence signal is registered. (copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  10. Attenuated total reflectance Fourier-transform infrared spectroscopy of carboxylic acids adsorbed onto mineral surfaces

    Science.gov (United States)

    Kubicki, J. D.; Schroeter, L. M.; Itoh, M. J.; Nguyen, B. N.; Apitz, S. E.

    1999-09-01

    A suite of naturally-occurring carboxylic acids (acetic, oxalic, citric, benzoic, salicylic and phthalic) and their corresponding sodium salts were adsorbed onto a set of common mineral substrates (quartz, albite, illite, kaolinite and montmorillonite) in batch slurry experiments. Solution pH's of approximately 3 and 6 were used to examine the effects of pH on sorption mechanisms. Attenuated total reflectance Fourier-transform infrared (ATR FTIR) spectroscopy was employed to obtain vibrational frequencies of the organic ligands on the mineral surfaces and in solution. UV/visible spectroscopy on supernatant solutions was also employed to confirm that adsorption from solution had taken place for benzoic, salicylic and phthalic acids. Molecular orbital calculations were used to model possible surface complexes and interpret the experimental spectra. In general, the tectosilicates, quartz and albite feldspar, did not chemisorb (i.e., strong, inner-sphere adsorption) the carboxylate anions in sufficient amounts to produce infrared spectra of the organics after rinsing in distilled water. The clays (illite, kaolinite and montmorillonite) each exhibited similar ATR FTIR spectra. However, the illite sample used in this study reacted to form strong surface and aqueous complexes with salicylic acid before being treated to remove free Fe-hydroxides. Chemisorption of carboxylic acids onto clays is shown to be limited without the presence of Fe-hydroxides within the clay matrix.

  11. Geochemical characteristics of rare earth elements in the surface sediments from the Spratly Islands of China.

    Science.gov (United States)

    Li, Jingxi; Sun, Chengjun; Zheng, Li; Yin, Xiaofei; Chen, Junhui; Jiang, Fenghua

    2017-01-30

    The geochemistry of rare earth elements (REE) in surface sediment from Cuarteron reef (N1), Johnson reef (N2), Hugh reef (N3), Gaven reef (N4), Fiery cross reef (N5), and Subi reef (N6) were firstly studied. The total REE abundance (∑REE) varied from 2.244μg·g -1 to 21.661μg·g -1 , with an average of 4.667μg·g -1 . The LREE/HREE was from 2.747 to 9.869, with an average of 3.687, which indicated that the light REE was evidently enriched. Fractionation was observed between LREE and HREE. Gd with a negative anomaly was also detected in all of the stations. The negative anomalies of δEu from 0.11 to 0.25, with an average of 0.22, and the positive anomalies of δCe from 1.38 to 3.86, with an average of 1.63. The REE individual correlation values with Ca, Mn, Mg, Sr were r Ca =-0.05, r Mn =0.26, r Mg =-0.14, and r Sr =0.08. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Near-surface shear-wave velocity measurements in unlithified sediment

    Science.gov (United States)

    Richards, B.T.; Steeples, D.; Miller, R.; Ivanov, J.; Peterie, S.; Sloan, S.D.; McKenna, J.R.

    2011-01-01

    S-wave velocity can be directly correlated to material stiffness and lithology making it a valuable physical property that has found uses in construction, engineering, and environmental projects. This study compares different methods for measuring S-wave velocities, investigating and identifying the differences among the methods' results, and prioritizing the different methods for optimal S-wave use at the U. S. Army's Yuma Proving Grounds YPG. Multichannel Analysis of Surface Waves MASW and S-wave tomography were used to generate S-wave velocity profiles. Each method has advantages and disadvantages. A strong signal-to-noise ratio at the study site gives the MASW method promising resolution. S-wave first arrivals are picked on impulsive sledgehammer data which were then used for the tomography process. Three-component downhole seismic data were collected in-line with a locking geophone, providing ground truth to compare the data and to draw conclusions about the validity of each data set. Results from these S-wave measurement techniques are compared with borehole seismic data and with lithology data from continuous samples to help ascertain the accuracy, and therefore applicability, of each method. This study helps to select the best methods for obtaining S-wave velocities for media much like those found in unconsolidated sediments at YPG. ?? 2011 Society of Exploration Geophysicists.

  13. CO2leakage from carbon dioxide capture and storage (CCS) systems affects organic matter cycling in surface marine sediments.

    Science.gov (United States)

    Rastelli, Eugenio; Corinaldesi, Cinzia; Dell'Anno, Antonio; Amaro, Teresa; Greco, Silvestro; Lo Martire, Marco; Carugati, Laura; Queirós, Ana M; Widdicombe, Stephen; Danovaro, Roberto

    2016-12-01

    Carbon dioxide capture and storage (CCS), involving the injection of CO 2 into the sub-seabed, is being promoted worldwide as a feasible option for reducing the anthropogenic CO 2 emissions into the atmosphere. However, the effects on the marine ecosystems of potential CO 2 leakages originating from these storage sites have only recently received scientific attention, and little information is available on the possible impacts of the resulting CO 2 -enriched seawater plumes on the surrounding benthic ecosystem. In the present study, we conducted a 20-weeks mesocosm experiment exposing coastal sediments to CO 2 -enriched seawater (at 5000 or 20,000 ppm), to test the effects on the microbial enzymatic activities responsible for the decomposition and turnover of the sedimentary organic matter in surface sediments down to 15 cm depth. Our results indicate that the exposure to high-CO 2 concentrations reduced significantly the enzymatic activities in the top 5 cm of sediments, but had no effects on subsurface sediment horizons (from 5 to 15 cm depth). In the surface sediments, both 5000 and 20,000 ppm CO 2 treatments determined a progressive decrease over time in the protein degradation (up to 80%). Conversely, the degradation rates of carbohydrates and organic phosphorous remained unaltered in the first 2 weeks, but decreased significantly (up to 50%) in the longer term when exposed at 20,000 ppm of CO 2 . Such effects were associated with a significant change in the composition of the biopolymeric carbon (due to the accumulation of proteins over time in sediments exposed to high-pCO 2 treatments), and a significant decrease (∼20-50% at 5000 and 20,000 ppm respectively) in nitrogen regeneration. We conclude that in areas immediately surrounding an active and long-lasting leak of CO 2 from CCS reservoirs, organic matter cycling would be significantly impacted in the surface sediment layers. The evidence of negligible impacts on the deeper sediments should be

  14. The effects of clam fishing on the properties of surface sediments in the lagoon of Venice, Italy

    Directory of Open Access Journals (Sweden)

    R. J. Aspen

    2004-01-01

    Full Text Available Harvesting of clams(Tapes philippinarum has important socio-economic and environmental implications for the Venice lagoon area, Italy. Clam harvesting disrupts the structure of benthic communities but the effects upon sediment stability and surface structure remain unclear. The effect of clam fishing on the sediment properties of the lagoon bed was investigated at two different sites, a heavily fished site (San Angelo and an infrequently fished site (San Giaccomo. Both sites were assessed for immediate impacts of fishing, using indicators of biogenic sediment stabilisation. Samples were taken at three points along three 100 m linear transects at each site prior to and post fishing. Paired samples were also taken parallel to each transect at a distance of 5m, to allow for temporal variation. Sediment stability, measured with a cohesive strength meter (CSM, was significantly higher at the less impacted site (F1,34 = 6.23, p a (chl a, colloidal-S carbohydrate and dry bulk density were observed on the transect after fishing but not adjacent to the fishing path. At the heavily impacted site, clam fishing by trawling had, in general, no significant effect on the biological and physical properties (although chl a did decrease significantly after fishing. The lack of a significant impact from fishing at the impacted site was attributed to the higher frequency of fishing occurring in this area. Hence, frequent fishing of the lagoon prevents establishment of biotic communities, preventing biostabilisation and thus reduces the stability of the surface sediment. Keywords: clam harvesting, erosion threshold, microphytobenthos, sediment, stability

  15. Regional distribution patterns of chemical parameters in surface sediments of the south-western Baltic Sea and their possible causes

    Science.gov (United States)

    Leipe, T.; Naumann, M.; Tauber, F.; Radtke, H.; Friedland, R.; Hiller, A.; Arz, H. W.

    2017-12-01

    This study presents selected results of a sediment geochemical mapping program of German territorial waters in the south-western Baltic Sea. The field work was conducted mainly during the early 2000s. Due to the strong variability of sediment types in the study area, it was decided to separate and analyse the fine fraction (TOC) and selected elements (P, Hg), the regional distribution maps show strong differences between the analysed fine fraction and the recalculated total sediment. Seeing that mud contents vary strongly between 0 and 100%, this can be explained by the well-known grain-size effect. To avoid (or at least minimise) this effect, further interpretations were based on the data for the fine fraction alone. Lateral transport from the large Oder River estuary combined with high abundances and activities of benthic fauna on the shallow-water Oder Bank (well sorted fine sand) could be some main causes for hotspots identified in the fine-fraction element distribution. The regional pattern of primary production as the main driver of nutrient element fixation (C, N, P, Si) was found to be only weakly correlated with, for example, the TOC distribution in the fine fraction. This implies that, besides surface sediment dynamics, local conditions (e.g. benthic secondary production) also have strong impacts. To the best of the authors' knowledge, there is no comparable study with geochemical analyses of the fine fraction of marine sediments to this extent (13,600 km2) and coverage (between 600 and 800 data points) in the Baltic Sea. This aspect proved pivotal in confidently pinpointing geochemical "anomalies" in surface sediments of the south-western Baltic Sea.

  16. Distribution of Polycystine Radiolarians in Bottom Surface Sediments and Its Relation to Summer Sea Temperature in the High-Latitude North Atlantic

    Directory of Open Access Journals (Sweden)

    Alexander Matul

    2017-10-01

    Full Text Available An objective of the study is to get new biogeographic information on the modern polycystine radiolarians from the high-latitude North Atlantic. The quantitative radiolarian dataset was compiled from publications and own micropaleontological counts from samples of the bottom surface sediments of the North Atlantic north of 40°N and Nordic Seas. Standard statistical treatment of micropaleontological data by factor analysis reveals five radiolarian assemblages which have their highest load at the specific temperature range in agreement with the oceanographic setting. An occurrence of radiolarian assemblages reflects extension and interaction of the warm North Atlantic and cold Polar/Arctic waters. Radiolarian distribution exhibits good correlation with the climatically averaged summer sea temperature on depth level of 200 m.

  17. [Chemical speciation and risk assessment of heavy metals in the middle part of Yarlung Zangbo surface sediments].

    Science.gov (United States)

    Bai, Jian-kunt; Li, Chao-liu; Kang, Shi-chang; Chen, Peng-fei; Wang, Jian-li

    2014-09-01

    Nine heavy metals (Cd, Co, Ni, Cu, Zn, Pb, Cs, As, Cr) of surface sediments collected from the Middle Part of the Yarlung Zangbo River were analyzed by BCR sequential extraction procedure. Based on speciation distributions of these metals, ecological risk of heavy metals was assessed with methods of risk assessment code (RAC) and sediment quality guideline quotient (SQG-Q). The results show that: (1) Large part of Cr and As belong to residual fraction(87%-96%). Ni, Cu, Co and Cs have similar distribution characteristics (non-residual part accounts for approximate 20%). Correspondingly, mass fraction of Cd exists mainly in acid soluble and reducible faction (65% ) , indicating high ecological risk level. (2) Based on calculation of RAC method, Cd is of high risk to the environment (37. 38%). Accordingly, Co, Ni, Cu and Zn are of low risk, and Pb, Cs, As and Cr pose extreme low risk to the environment. According to evaluation of heavy metal speciation distributions, the potential ecological risk of heavy metals is in the descending order of Cd > Co > Ni > Cu > Zn > Pb > Cs > As > Cr. (3) The SQG index of sediments is 0. 804, indicating that studied river sediment has a moderate potential biological toxicity effect. Given most of heavy metals exists in residual fraction, the sediments of this region pose a low ecological risk to the environment.

  18. Temperature coefficient for modeling denitrification in surface water sediments using the mass transfer coefficient

    Science.gov (United States)

    T.W. Appelboom; G.M. Chescheir; F. Birgand; R.W. Skaggs; J.W. Gilliam; D. Amatya

    2010-01-01

    Watershed modeling has become an important tool for researchers. Modeling nitrate transport within drainage networks requires quantifying the denitrification within the sediments in canals and streams. In a previous study, several of the authors developed an equation using a term called a mass transfer coefficient to mathematically describe sediment denitrification....

  19. Temperature Coefficient for Modeling Denitrification in Surface Water Sediments Using the Mass Transfer Coefficient

    Science.gov (United States)

    T. W. Appelboom; G. M. Chescheir; R. W. Skaggs; J. W. Gilliam; Devendra M. Amatya

    2006-01-01

    Watershed modeling has become an important tool for researchers with the high costs of water quality monitoring. When modeling nitrate transport within drainage networks, denitrification within the sediments needs to be accounted for. Birgand et. al. developed an equation using a term called a mass transfer coefficient to mathematically describe sediment...

  20. Grain-size distribution of surface sediments of climbing and falling ...

    Indian Academy of Sciences (India)

    45

    signals of past environmental and climate changes, reveals development of paleosoil,. 37 implies sources and sinks of dust ...... Lancaster N, and Tchakerian V P. 1996. Geomorphology and sediments of sand ... Nebraska Sand Hills: intrinsic versus climatic controls on the accumulation of lake. 471 and marsh sediments.

  1. Four-season variation of 2014 year in the surface sediments of the Gochang beach, southwestern coast of Korea

    Science.gov (United States)

    Ryang, Woo Hun; Kang, Sol-Ip

    2015-04-01

    The marco-tide, open-coast Gochang beach, located on the southwestern coast of Korea, was studied in terms of four season variations in surface sediment and sedimentary environment. During the four seasons of winter (February), spring (May), summer (August), and fall (November) in 2014 year, surface sediments of total 252 sites were sampled across three survey lines, consisting of 21 sites at 30 m intervals in each transverse line to the coast, respectively. The Gochang beach comprises the Dongho, Kwangseungri, and Myeongsasipri beaches from north to south. The pocket-type Dongho beach is mainly composed of very fine sands to very coarse sands, and the ratio of fine sand is the largest. The average of grain size is the coarsest in the winter. The spatial distribution of surface sediments shows a coast-parallel trend of fine and medium sands during the four seasons. During the winter, the upper tidal flat was dominated by medium sand, while the lower tidal flat was dominated by find sand. The surface sediments of the Kwangseungri beach are mainly composed of fine-grained sands, and the mean grain size is the coarsest in winter. Grain-size distribution shows a uni-mode pattern in the four seasons. Mud facies partly exist in spring and summer seasons, whereas it is rarely shown in autumn and winter. The spatial distribution of surface sediments shows a coast-parallel trend of fine to coarse sand during the four seasons. The Myeongsasipri beach is mainly composed of very fine sands to very coarse sands, and the ratio of fine sand is the largest. Grain-size distribution shows a weak bi-modal trend in the autumn and a uni-mode pattern in the spring, summer and winter. The mean grain size of the winter is the coarsest among those of four seasons. The spatial distribution of four seasons also shows a coast-parallel trend. During the four seasons of 2014 year in the Gochang beach, overall distribution of the grain sizes represents a fining trend from upper to lower tidal

  2. Recent Developments in the X-Ray Reflectivity Analysis for Rough Surfaces and Interfaces of Multilayered Thin Film Materials

    Directory of Open Access Journals (Sweden)

    Yoshikazu Fujii

    2013-01-01

    Full Text Available X-ray reflectometry is a powerful tool for investigations on rough surface and interface structures of multilayered thin film materials. The X-ray reflectivity has been calculated based on the Parratt formalism, accounting for the effect of roughness by the theory of Nevot-Croce conventionally. However, in previous studies, the calculations of the X-ray reflectivity often show a strange effect where interference effects would increase at a rough surface. And estimated surface and interface roughnesses from the X-ray reflectivity measurements did not correspond to the TEM image observation results. The strange result had its origin in a used equation due to a serious mistake in which the Fresnel transmission coefficient in the reflectivity equation is increased at a rough interface because of a lack of consideration of diffuse scattering. In this review, a new accurate formalism that corrects this mistake is presented. The new accurate formalism derives an accurate analysis of the X-ray reflectivity from a multilayer surface of thin film materials, taking into account the effect of roughness-induced diffuse scattering. The calculated reflectivity by this accurate reflectivity equation should enable the structure of buried interfaces to be analyzed more accurately.

  3. Assessment of heavy metal pollution in surface sediments of the Bayan Lepas area, Penang, Malaysia.

    Science.gov (United States)

    Khodami, Sharareh; Surif, Misni; W O, Wan Maznah; Daryanabard, Reza

    2017-01-15

    This study aimed to evaluate the spatial and temporal distribution of heavy metals (Cd, Cr, Cu, Co, Fe, Pb, Ni, V, and Zn) in the sediments of Bayan Lepas Free Industrial Zone of Penang, Malaysia. Ten sampling stations were selected and sediment samples were collected during low tide (2012-2013). Metals were analyzed and the spatial distribution of metals were evaluated based on GIS mapping. According to interim sediment quality guidelines (ISQG), metal contents ranged from below low level to above high level at different stations. Based on the geoaccumulation index (I geo ) of sediment, sampling stations were categorized from unpolluted to strongly polluted. The enrichment factor (EF) of metals in the sediment varied between no enrichment to extremely high enrichment. The potential ecological risk index (RI) indicated Bayan Lepas FIZ was at low risk. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. A sea surface reflectance model for (A)ATSR, and application to aerosol retrievals

    Science.gov (United States)

    Sayer, A. M.; Thomas, G. E.; Grainger, R. G.

    2010-07-01

    A model of the sea surface bidirectional reflectance distribution function (BRDF) is presented for the visible and near-IR channels (over the spectral range 550 nm to 1.6 μm) of the dual-viewing Along-Track Scanning Radiometers (ATSRs). The intended application is as part of the Oxford-RAL Aerosols and Clouds (ORAC) retrieval scheme. The model accounts for contributions to the observed reflectance from whitecaps, sun-glint and underlight. Uncertainties in the parametrisations used in the BRDF model are propagated through into the forward model and retrieved state. The new BRDF model offers improved coverage over previous methods, as retrievals are possible into the sun-glint region, through the ATSR dual-viewing system. The new model has been applied in the ORAC aerosol retrieval algorithm to process Advanced ATSR (AATSR) data from September 2004 over the south-eastern Pacific. The assumed error budget is shown to be generally appropriate, meaning the retrieved states are consistent with the measurements and a priori assumptions. The resulting field of aerosol optical depth (AOD) is compared with colocated MODIS-Terra observations, AERONET observations at Tahiti, and cruises over the oceanic region. MODIS and AATSR show similar spatial distributions of AOD, although MODIS reports values which are larger and more variable. It is suggested that assumptions in the MODIS aerosol retrieval algorithm may lead to a positive bias in MODIS AOD of order 0.01 at 550 nm over ocean regions where the wind speed is high.

  5. Online Monitoring of Laser-Generated XUV Radiation Spectra by Surface Reflectivity Measurements with Particle Detectors

    Directory of Open Access Journals (Sweden)

    Andreas Hoffmann

    2017-01-01

    Full Text Available In this contribution, we present a wavelength-sensitive method for the detection of extreme ultraviolet (XUV photon energies between 30 eV and 120 eV. The method is based on 45° reflectivity from either a cesium iodide-coated or an uncoated metal surface, which directs the XUV beam onto an electron or ion detector and its signal is used to monitor the XUV beam. The benefits of our approach are a spectrally sensitive diagnosis of the XUV radiation at the interaction place of time-resolved XUV experiments and the detection of infrared leak light though metal filters in high-harmonic generation (HHG experiments. Both features were tested using spectrally shaped XUV pulses from HHG in a capillary, and we have achieved excellent agreement with XUV spectrometer measurements and reflectivity calculations. Our obtained results are of interest for time-resolved XUV experiments presenting an additional diagnostic directly in the interaction region and for small footprint XUV beamline diagnostics.

  6. Mixed polymer conductors for control of microwave reflectivity surfaces. Volume I

    International Nuclear Information System (INIS)

    Despotakis, A.

    1998-06-01

    The preparation and characterisation of polyaniline-silver-polymer electrolyte composite materials are described and their potential application as large area surfaces with microwave reflection/transmission controlled by application of an electric field ('microwave shutters') is investigated. The component polymer electrolyte (largely polyether-silver salt) and the polyaniline-silver salt mixtures have been separately investigated using a range of spectroscopic, microscopic and electrical impedance techniques. The redox behaviour of polyaniline versus silver in various cells incorporating polymer electrolytes have been studied in both ambient and 'dry' nitrogen environments using cyclic voltammetry and square wave potentiometry. It is proposed that the redox behaviour in dry nitrogen conditions involves the formation of leucoemeraldine-Ag + complex. This promotes the spontaneous reduction of emeraldine salt to leucoemeraldine by silver metal in contrast to the equilibrium status of the system in ambient conditions. In ambient conditions, the emeraldine undergoes an acid-base transition in the presence of silver salt (with(out) elemental silver). Furthermore, X-ray analysis has revealed that it is possible to chemically generate elemental silver after mixing its silver salt with the emeraldine (either salt or base form) in ambient conditions. Discs of various polyaniline-silver-polymer electrolyte compositions have been reported. Significant and rapid changes in microwave reflectivities have been observed. The mechanisms of electrochemical changes within the composites have been discussed and a 'cascade' process for the propagation of the switching effect across the areas of the discs has been proposed. (author)

  7. Tracing sewage pollution using linear alkylbenzenes (LABs) in surface sediments at the south end of the Southern California Bight

    International Nuclear Information System (INIS)

    Macias-Zamora, J.V.; Ramirez-Alvarez, N.

    2004-01-01

    Distribution and isomeric composition of LABs in surface marine sediments were evaluated at the southern end of the southern California Bight. LABs are used as tracers of wastewater discharges. The area studied extends from the Mexico-USA border to the Todos Santos Bay, Baja California in the south. The area was partitioned into a northern, central and a southern stratum. GC-MS was used for the analysis of LABs concentration. The average value of total LABs concentration was 17.4, 32.0 and 24.9 ng/g for the north, central and southern strata, respectively. LABs were not correlated with either sediments grain size (% 10 , LAB 11 ) showed enrichment. It was found that 67 out of the 68 stations measured had concentrations above detection limits. This suggests extensive contact of wastewater discharges with marine sediments in the area. An estimate of the amount of LABs per year based on detergent consumption per capita is provided. - Linear alkylbenzenes were used to trace the distribution of sewage pollution of surface marine sediments

  8. Biogeochemistry of bulk organic matter and biogenic elements in surface sediments of the Yangtze River Estuary and adjacent sea

    International Nuclear Information System (INIS)

    Yang, Bin; Cao, Lu; Liu, Su-Mei; Zhang, Guo-Sen

    2015-01-01

    Highlights: • Biogenic elements cycling in the YRE and adjacent sea surface sediments was discussed. • Factors influencing the biogenic elements distributions were examined. • Potential bioavailability of N and P was determined. • Burial fluxes of TOC, BSi, TN and TP were estimated. • Potential nutrient limitation factors were assessed. - Abstract: This study investigated the distribution and roles of total organic carbon (TOC), biogenic silicon (BSi), various forms of nitrogen (N) and phosphorus (P), and the stable carbon isotope (δ 13 C) in surface sediments of the Yangtze River Estuary (YRE) and adjacent sea. Terrestrial input accounted for 12–63% of total organic matter in the study area. The distribution of biogenic elements was affected by the Changjiang Diluted Water, the Jiangsu Coastal Current, human activities, marine biological processes, and the sediment grain size. Potentially bioavailable N and P accounted for an average 79.6% of the total N (TN) and 31.8% of the total P (TP), respectively. The burial fluxes for TOC, BSi, TN and TP were 39.74–2194.32, 17.34–517.48, 5.02–188.85 and 3.10–62.72 μmol cm −2 yr −1 , respectively. The molar ratios of total N/P (1.2–5.0), Si/P (5.0–14.8) and Fe/P (21–61) indicated that much of the P was sequestered in sediments

  9. Relationship between the velvet-like texture of flower petals and light reflection from epidermal cell surfaces.

    Science.gov (United States)

    Zhang, Yang; Sun, Tianxun; Xie, Linan; Hayashi, Takahiro; Kawabata, Saneyuki; Li, Yuhua

    2015-07-01

    Texture such as velvet lustre contributes to the ornamental character of a flower, along with shape and colour. This study aims to clarify the relationship between the formation of the velvet lustre texture and the optical characteristics of light reflection from irradiated surfaces of velvety and non-velvety petals from 30 cultivars or varieties of ornamental plants representing 19 species from various families. The angle of incident light from the petal surface was set at 90°, 60° or 30°, then light reflection from the petal surfaces was observed using a digital microscope. The observed reflected light was composed of "exterior" reflected light (ERL), which is observed as sparkling white spots on the surface of the epidermal cells, and "interior" reflected light (IRL), which is reflected from inside the petal and determines the base colour of the petals. Velvety petals had two common characteristics: conical-papillate or domed epidermal cells and a dark colour. As the angle between the petal and the incident light decreased, the ERL spots took on a belt-like shape, and total ERL intensity became stronger. We concluded that the velvety texture is derived from characteristic ERL rays coupled with dark IRL. The long sloping surface of the epidermal cells contributes to the higher ERL intensity as petals are observed from more horizontal angles, causing characteristic reverse shading effects on velvety petals.

  10. The secondary calcification of Neogloboquadrina pachyderma assemblages in Arabian Sea waters and surface sediments

    Science.gov (United States)

    Abdolalipour, Samereh; Schulz, Hartmut; Darling, Kate F.

    2014-05-01

    data were calculated with a one-way ANOVA statistic method. Test sizes of measured N. pachyderma from both multinets and surface sediments varied from 123 μm to 283 μm. The mean test size of plankton samples was 150 μm and of sediment samples 174 μm, respectively. In total, secondary calcification was found on 80 % of the investigated specimens. We found no significant correlation between shell size and secondary calcification. Rather, encrustation is most pronounced for the sea floor specimens, where that ratio is from 0.46 % to 0.72 %, much higher than for the plankton tows with ratio between 0.46 % and 0.49 %. Further analysis will be required to better understand chamber formation and the process of secondary calcification in the Arabian Sea N. pachyderma population. Darling, K. F., Kucera, M., Kroon, D. and Wade, C. M., 2006. A resolution for the coiling direction paradox in Neogloboquadrina . Paleoceanography, 21, PA2011.

  11. A Harmonized Landsat-Sentinel-2 Surface Reflectance product: a resource for Agricultural Monitoring

    Science.gov (United States)

    Masek, J. G.; Claverie, M.; Ju, J.; Vermote, E.; Justice, C. O.

    2015-12-01

    The combination of Landsat and Sentinel-2 data offers a unique opportunity to observe globally the land every 2-3 days at medium (reflectance data from Landsat and Sentinel-2 missions and to deliver them to the community in a combined, seamless form. The HLS will be beneficial for global agricultural monitoring applications that require medium spatial resolution and weekly or more frequent observations. In particular, the provided opportunity to track crop phenology at the scale of individual fields will support detailed mapping of crop type and type-specific vegetation conditions. To create a compatible set of radiometric measurements, the HLS product relies on rigorous pre- and post-launch cross-calibration (Landsat-8 OLI and Sentinel-2 MSI) activities. The processing chain includes the following components: atmospheric correction, cloud/shadow masking, nadir BRDF-adjustment, spectral-adjustment, regridding, and temporal composite. The atmospheric correction and cloud masking is based on the OLI atmospheric correction developed at NASA-GSFC and has been adapted to the MSI data. The BRDF-adjustment is based on a disaggregation technique using MODIS-based BRDF coefficients. The technique has been evaluated using the multi-angular acquisition from the SPOT 4 and 5 (Take5) experiments. The spectral-adjustment relies on a linear regression that has been calibrated and evaluated using synthetic data and surface reflectance processed from a large number of hyperspectral EO-1 Hyperion scenes. Finally, significant effort is placed on product validation and evaluation. The delivered data set will include surface reflectance products at different levels: Using the native gridding, i.e. UTM, 30m for Landsat-8, and UTM, 10-20m for Sentinel-2 Using a common global gridding (Sinusoidal, 30m) Temporal composite (Sinusoidal, 30m, 5-day) During the first year of operation of Sentinel-2A, the HLS will be prototyped over a selection of 30 sites that includes some of the JECAM sites

  12. Influence of aerosol and surface reflectance variability on hyperspectral observed radiance

    Directory of Open Access Journals (Sweden)

    C. Bassani

    2012-06-01

    Full Text Available Current aerosol retrievals based on visible and near infrared remote-sensing, are prone to loss of accuracy, where the assumptions of the applied algorithm are violated. This happens mostly over land and it is related to misrepresentation of specific aerosol conditions or surface properties. New satellite missions, based on high spectral resolution instruments, such as PRISMA (Hyperspectral Precursor of the Application Mission, represent a valuable opportunity to improve the accuracy of τa550 retrievable from a remote-sensing system developing new atmospheric measurement techniques. This paper aims to address the potential of these new observing systems in more accurate retrieving τa550, specifically over land in heterogeneous and/or homogeneous areas composed by dark and bright targets. The study shows how the variation of the hyperspectral observed radiance can be addressed to recognise a variation of Δτa550 = 0.02. The goal has been achieved by using simulated radiances by combining two aerosol models (urban and continental and two reflecting surfaces: dark (represented by water and bright (represented by sand for the PRISMA instrument, considering the environmental contribution of the observed radiance, i.e., the adjacency effect. Results showed that, in the continental regime, the expected instrument sensitivity would allow for retrieval accuracy of the aerosol optical thickness at 550 nm of 0.02 or better, with a dark surface surrounded by dark areas. The study also showed that for the urban regime, the surface plays a more significant role, with a bright surface surrounded by dark areas providing favourable conditions for the aerosol load retrievals, and dark surfaces representing less suitable situations for inversion independently of the surroundings. However, over all, the results obtained provide evidence that high resolution observations of Earth spectrum between

  13. Interactions between surface runoff, hydro sediments and radionuclides (210Pb, 226Ra, 228Ra, Th e U) at Alto Ribeirão das Antas, Poços de Caldas, MG, Brazil

    International Nuclear Information System (INIS)

    Moreira, Flavio Henrique de Souza

    2017-01-01

    Knowledge about hydrological and sedimentological dynamics of a river basin is fundamental to the adequate management of water resources, and it can support the identification of contaminants in the water, the estimation of water erosion, the estimation of reservoir siltation, and even the reduction of water treatment costs. The study carried out in Alto Ribeirão das Antas River Basin assessed, throughout seasons, all interactions between the surface runoff and the transport of suspended and underwater hydro-sediments, through direct monitoring of two sites at the Ribeirão das Antas channel. Concurrently, the potential of the indirect monitoring of suspended solids concentration was evaluated using an optical turbidity sensor. The hydrological results point to a high precipitation in the region, however with a well balanced distribution among the humid months, allowing the basin’s high capacity to transform precipitation into surface runoff. Sediment transport rates characterize the studied area as a low sediment production region. The sedimentological regime was found to be in accordance with the surface runoff regime, reflected by the seasonality of the transported masses. The estimation of transport of sediment in suspension through optical turbidity sensor presented promising results. Most of the results of radionuclides 210 Pb, 226 Ra, 228 Ra, Th and U observed in water and in suspended hydro-sediment were below the detection limit of the methodology, whereas in the riverbed hydro-sediments quantification of radionuclides was possible. The radiometric results indicate absence of radionuclide carriage from the Águas Claras Dam at INB Caldas to Ribeirão das Antas. The low concentration values of radioactive elements observed in the study may be of natural origin, once the Poços de Caldas Plateau region presents a geological constitution endowed with anomalies associated to radionuclides. (author)

  14. Fine scale distributions of porosity and particulate excess 210Pb, organic carbon and CaCO3 in surface sediments of the deep equatorial Pacific

    International Nuclear Information System (INIS)

    Jahnke, R.A.; Emerson, S.R.; Cochran, J.K.; Hirschberg, D.J.

    1986-01-01

    Sediment samples were recovered from the central equatorial Pacific Ocean, sectioned at 1-mm intervals, and analyzed for porosity, organic carbon, excess 210 Pb and CaCO 3 . Steep porosity gradients were measured in the upper 1 cm of the sediment column with extremely high values observed near the sediment surface. Similarly, particulate organic carbon contents are highest at the sediment surface, decrease sharply in the upper 1 cm, and are relatively constant between 1 and 5 cm. CaCO 3 values, on the other hand, are lowest at the sediment surface and increase to a constant value below 5-10 mm depth. At the carbonate ooze sites, excess 210 Pb is present throughout the upper 5 cm of the sediments suggesting relatively rapid particle mixing rates. However, extremely high excess 210 Pb activities (> 100 dpm/g) are observed at the sediment surface with sharp gradients present in the upper 1 cm which would suggest slow rates of mixing. This apparent contradiction along with the major features of the CaCO 3 and particulate organic carbon profiles can be explained by a particle-selective feeding mechanism in which organic carbon, excess 210 Pb-enriched particles are preferentially maintained at the sediment surface via ingestion and defecation by benthic organisms. (orig.)

  15. Evolution of the northern Albertine Rift reflected in the provenance of synrift sediments (Nkondo-Kaiso area, Uganda)

    Science.gov (United States)

    Schneider, Sandra; Hornung, Jens; Hinderer, Matthias

    2017-07-01

    Rift sediments are important archives for the evolution of the East African Rift System. We present a source-to-sink study of the Nkondo-Kaiso area in the northern Albertine Rift from a ∼200 m thick late Miocene to early Pleistocene sediment succession. The multi-proxy provenance analysis includes framework petrography, heavy mineral studies and single grain studies of garnet and rutile. Mineral textures and provenance signatures indicate two major stages. Sediment of Stage 1 (late Miocene - late Pliocene; ∼6.5-2.6 Ma) is less mature with quartz contents of 58-81%, K-feldspar of 9-15%, plagioclase of 4-15%, and rock fragments of 1-9%. Heavy mineral spectra are dominated by epidote and amphibole with minor abundances of zircon, sillimanite and garnet. Garnet is almandine-rich and can be grouped according to grossular contents (10%). Rutile exhibits a wide range of Nb and Cr concentrations, most of them typical for a metapelitic origin. Zr-in-rutile formation temperatures range between ∼570 and 940 °C. Garnet and rutile geochemistry mainly correspond to amphibolite-to granulite-facies igneous and metasedimentary rocks, which exist in the Mesoarchean Karuma Group and the Neoarchean granitoid gneiss of the North Uganda Terrane. Both are part of the adjacent eastern rift flank of the Albertine Rift. A slight change of the heavy mineral composition at ∼4.5 Ma can be correlated with the onset of the synrift stage ∼0.5-1.0 Ma later than in the southern Albertine Rift. Sediment of Stage 2 (early Pleistocene ∼2.6-1.0 Ma) shows a higher quartz content of 82-93%, and lower contents of K-feldspar of 5-11%, plagioclase of 1-7%, and rock fragments of 1-2%. Stable heavy minerals (ZTR index: 19-63) and epidote dominate with minor amphibole and garnet. Rutile and garnet chemical compositions remain largely unchanged to Stage 1 pointing to the same primary source. Obviously, Pleistocene sediment was mainly recycled from sedimentary rocks of the Neoproterozoic Bunyoro

  16. Metal pollution status in Zhelin Bay surface sediments inferred from a sequential extraction technique, South China Sea.

    Science.gov (United States)

    Gu, Yang-Guang; Lin, Qin; Jiang, Shi-Jun; Wang, Zhao-Hui

    2014-04-15

    Surface sediments collected from Zhelin Bay, the largest mariculture base of eastern Guangdong Province, were analyzed for total metal concentrations and chemical speciation. The results demonstrated that the average total concentration (mg/kg) ranges were 36.7-65.8 (Pb), 53.8-98.8 (Cr), 39.0-87.1 (Ni), 50.9-144.5 (Cu), and 175.0-251.2 (Zn), which were clearly higher with respect to their corresponding benchmark values. The predominant speciation of Pb was reducible and comprised a residual fraction, whereas a major portion (57.6-95.4%) of Cr, Ni, Cu, and Zn was strongly associated with the residual fractions. Taking as a whole, surface sediments of Zhelin Bay had a 21% probability of toxicity based on the mean effects range-median quotient. Copyright © 2014 Elsevier Ltd. All rights reserved.

  17. Sediment composition of big Chinese and Indochinese rivers reflects geology of their source, not tectonic setting of their sink.

    Science.gov (United States)

    Garzanti, Eduardo; Andò, Sergio; Limonta, Mara; Nie, Junsheng; Resentini, Alberto; Vezzoli, Giovanni; Wang, Jiangang; Yang, Shouye

    2016-04-01

    There are several reasons why the tectonic setting of a sedimentary basin cannot be inferred from the composition of its sedimentary fill. One is that sediments can, and quite often are transported for thousands of kilometers from sources uplifted by certain tectonic processes to subsident basins created by totally different tectonic processes. A classical case is the Amazon River, carrying detritus from the Andean Cordillera to the Atlantic passive margin on the opposite side of South America (Franzinelli and Potter, 1983; Dickinson, 1988). Similar is the case of major rivers in China and Indochina, sourced in Tibetan orogenic highlands and reaching the Chinese passive margin or the back-arc/pull-apart Andaman Sea. The Huang He (Yellow River), the most sediment-laden river in the world, delivers annually to the Bohai Sea 1 billion tons of litho-feldspatho-quartzose sedimentaclastic/metamorphiclastic sediments with moderately rich, amphibole-epidote-garnet suites including apatite and zircon (Nie et al., 2015). The Changjiang (Yangtze) River, the fourth longest on Earth and the largest in Eurasia, carries to the East China Sea litho-feldspatho-quartzose sedimentaclastic/metamorphiclastic sand with moderately poor, amphibole-epidote suites including clinopyroxene and garnet (Vezzoli et al., 2016). The Ayeyarwadi (Irrawaddy) River, ranking among the five major rivers in the world for its annual load of 0.4 billion tons, carries to the Andaman Sea litho-feldspatho-quartzose metamorphiclastic/sedimentaclastic sand with moderately rich, amphibole-epidote suites including garnet and clinopyroxene (Garzanti et al., 2013). Detrital modes in these three very big river basins are thus similar, and would plot in the "Recycled Orogen" field of Dickinson (1985) rather than in the "Continental Block" or "Magmatic Arc" fields. The orogenic signature acquired in mountainous headwaters is carried all the way to the mouth, and even after long-distance transport across wide

  18. Continuity of Reflectance Data between Landsat-7 ETM+ and Landsat-8 OLI, for Both Top-of-Atmosphere and Surface Reflectance: A Study in the Australian Landscape

    Directory of Open Access Journals (Sweden)

    Neil Flood

    2014-08-01

    Full Text Available The new Landsat-8 Operational Land Imager (OLI is intended to be broadly compatible with the previous Landsat-7 Enhanced Thematic Mapper Plus (ETM+. The spectral response of the OLI is slightly different to the ETM+, and so there may be slight differences in the reflectance measurements. Since the differences are a function not just of spectral responses, but also of the target pixels, there is a need to assess these differences in practice, using imagery from the area of interest. This paper presents a large scale study of the differences between ETM+ and OLI in the Australian landscape. The analysis is carried out in terms of both top-of-atmosphere and surface reflectance, and also in terms of biophysical parameters modelled from those respective reflectance spectra. The results show small differences between the sensors, which can be magnified by modelling to a biophysical parameter. It is also shown that a part of this difference appears to be systematic, and can be reliably removed by regression equations to predict ETM+ reflectance from OLI reflectance, before applying biophysical models. This is important when models have been fitted to historical field data coincident with ETM+ imagery. However, there will remain a small per-pixel difference which could be an unwanted source of variability.

  19. Water erosion in surface soil conditions: runoff velocity, concentration and D50 index of sediments in runoff

    Directory of Open Access Journals (Sweden)

    Júlio César Ramos

    2016-06-01

    Full Text Available ABSTRACT Water erosion and contamination of water resources are influenced by concentration and diameter of sediments in runoff. This study aimed to quantify runoff velocity and concentration and the D50 index of sediments in runoff under different soil surface managements, in the following treatments: i cropped systems: no-tilled soil covered by ryegrass (Lolium multiflorum Lam. residue, with high soil cover and minimal roughness (HCR; no tilled soil covered by vetch (Vicia sativa L. residue, with high soil cover and minimal roughness (HCV; chiseled soil after ryegrass crop removing the above-ground residues and keeping only the root system, with high roughness (HRR; chiseled soil after vetch crop removing the above-ground residues and keeping only the root system, with high roughness (HRV; ii bare and chiseled soil, with high roughness (BHR. The research was conducted on a Humic Dystrupept under simulated rainfall. The design was completely randomized and each treatment was replicated twice. Eight rainfall events of controlled intensity (65 mm h−1 were applied to each treatment for 90 minutes. The D50 index, runoff velocity and sediment concentration were influenced by crop and soil management. Runoff velocity was more intensely reduced by cover crop residues than by surface roughness. Regardless of surface condition, the D50 index and concentration of sediment in runoff were lower under ryegrass than vetch crop. Runoff velocity and the D50 index were exponentially and inversely correlated with soil cover by residues and with surface roughness, while the D50 index was positively and exponentially correlated with runoff velocity.

  20. Phase analysis for three-dimensional surface reconstruction of apples using structured-illumination reflectance imaging

    Science.gov (United States)

    Lu, Yuzhen; Lu, Renfu

    2017-05-01

    Three-dimensional (3-D) shape information is valuable for fruit quality evaluation. This study was aimed at developing phase analysis techniques for reconstruction of the 3-D surface of fruit from the pattern images acquired by a structuredillumination reflectance imaging (SIRI) system. Phase-shifted sinusoidal patterns, distorted by the fruit geometry, were acquired and processed through phase demodulation, phase unwrapping and other post-processing procedures to obtain phase difference maps relative to the phase of a reference plane. The phase maps were then transformed into height profiles and 3-D shapes in a world coordinate system based on phase-to-height and in-plane calibrations. A reference plane-based approach, coupled with the curve fitting technique using polynomials of order 3 or higher, was utilized for phase-to-height calibrations, which achieved superior accuracies with the root-mean-squared errors (RMSEs) of 0.027- 0.033 mm for a height measurement range of 0-91 mm. The 3rd-order polynomial curve fitting technique was further tested on two reference blocks with known heights, resulting in relative errors of 3.75% and 4.16%. In-plane calibrations were performed by solving a linear system formed by a number of control points in a calibration object, which yielded a RMSE of 0.311 mm. Tests of the calibrated system for reconstructing the surface of apple samples showed that surface concavities (i.e., stem/calyx regions) could be easily discriminated from bruises from the phase difference maps, reconstructed height profiles and the 3-D shape of apples. This study has laid a foundation for using SIRI for 3-D shape measurement, and thus expanded the capability of the technique for quality evaluation of horticultural products. Further research is needed to utilize the phase analysis techniques for stem/calyx detection of apples, and optimize the phase demodulation and unwrapping algorithms for faster and more reliable detection.

  1. Automated sulcal depth measurement on cortical surface reflecting geometrical properties of sulci.

    Directory of Open Access Journals (Sweden)

    Hyuk Jin Yun

    Full Text Available Sulcal depth that is one of the quantitative measures of cerebral cortex has been widely used as an important marker for brain morphological studies. Several studies have employed Euclidean (EUD or geodesic (GED algorithms to measure sulcal depth, which have limitations that ignore sulcal geometry in highly convoluted regions and result in under or overestimated depth. In this study, we proposed an automated measurement for sulcal depth on cortical surface reflecting geometrical properties of sulci, which named the adaptive distance transform (ADT. We first defined the volume region of cerebrospinal fluid between the 3D convex hull and the cortical surface, and constructed local coordinates for that restricted region. Dijkstra's algorithm was then used to compute the shortest paths from the convex hull to the vertices of the cortical surface based on the local coordinates, which may be the most proper approach for defining sulcal depth. We applied our algorithm to both a clinical dataset including patients with mild Alzheimer's disease (AD and 25 normal controls and a simulated dataset whose shape was similar to a single sulcus. The mean sulcal depth in the mild AD group was significantly lower than controls (p = 0.007, normal [mean±SD]: 7.29±0.23 mm, AD: 7.11±0.29 and the area under the receiver operating characteristic curve was relatively high, showing the value of 0.818. Results from clinical dataset that were consistent with former studies using EUD or GED demonstrated that ADT was sensitive to cortical atrophy. The robustness against inter-individual variability of ADT was highlighted through simulation dataset. ADT showed a low and constant normalized difference between the depth of the simulated data and the calculated depth, whereas EUD and GED had high and variable differences. We suggest that ADT is more robust than EUD or GED and might be a useful alternative algorithm for measuring sulcal depth.

  2. Organic matter diagenesis within the water column and surface sediments of the northern Sargasso Sea revealed by lipid biomarkers

    Science.gov (United States)

    Conte, M. H.; Pedrosa Pàmies, R.; Weber, J.

    2017-12-01

    The intensity of particle cycling processes within the mesopelagic and bathypelagic ocean controls the length scale of organic material (OM) remineralization and diagenetic transformations of OM composition through the water column and into the sediments. To elucidate the OM cycling in the oligotrophic North Atlantic gyre, we analyzed lipid biomarkers in the suspended particles (30-4400 m depth, 100 mab), the particle flux (500 m, 1500 m and 3200 m depth), and in the underlying surficial sediments (0-0.5 cm, 4500-4600 m depth) collected at the Oceanic Flux Program (OFP) time series site located 75km SE of Bermuda. Changes in lipid biomarker concentration and composition with depth highlight the rapid remineralization of OM within the upper mesopelagic layer and continuing diagenetic transformations of OM throughout the water column and within surficial sediments. Despite observed similarities in biomarker composition in suspended and sinking particles, results show there are also consistent differences in relative contributions of phytoplankton-, bacterial- and zooplankton-derived sources that are maintained throughout the water column. For example, sinking particles are more depleted in labile biomarkers (e.g. polyunsaturated fatty acids (PUFA)) and more enriched in bacteria-derived biomarkers (e.g. hopanoids and odd/branched fatty acids) and indicators of fecal-derived OM (e.g. saturated fatty acids, FA 18:1w9 and cholesterol) than in the suspended pool. Strong seasonality in deep (3200 m) fluxes of phytoplankton-derived biomarkers reflect the seasonal input of bloom-derived material to underlying sediments. The rapid diagenetic alteration of this bloom-derived input is evidenced by depletion of PUFAs and enrichment of microbial biomarkers (e.g. odd/branched fatty acids) in surficial sediments over a two month period.

  3. Distribution and assessment of heavy metals in the surface sediment of Yellow River, China.

    Science.gov (United States)

    Yan, Nan; Liu, Wenbin; Xie, Huiting; Gao, Lirong; Han, Ying; Wang, Mengjing; Li, Haifeng

    2016-01-01

    Large amounts of heavy metals discharged by industrial cities that are located along the middle reach of Yellow River, China have detrimental impacts on both the ecological environment and human health. In this study, fourteen surface sediment samples were taken in the middle reach of the Yellow River. Contents of Zn, Pb, Ni, Cu, Cr, Cd, As were measured, and the pollution status was assessed using three widely used pollution assessment methods, including the single factor index method, Nemerow pollution index method and potential ecological risk index. The concentrations of the studied heavy metals followed the order: Zn>Cr>Cu>Ni>Pb>As>Cd. Nearly 50% of sites had Cu and Cr accumulation. The concentration of Cu at the Yiluo River exceeded the secondary standard value of the Environmental quality standard for soils. Comparison of heavy metal concentrations between this study and other selected rivers indicated that Cu and Cr may be the major pollutants in our case. The single factor index indicated that many samples were at high levels of pollution for Cu and Cd; the Nemerow pollution index indicated that the Yihe River, Luohe River, Yiluo River and Huayuankou were polluted. According to the results of potential ecological risk assessment, Cd in the tributaries of Luo River, Yihe River, and Yiluo River showed high risk toward the ecosystem and human health, Cd in Huanyuankou and Cu in Yiluo River showed a middle level of risk and other samples were at a low level of risk. Copyright © 2015. Published by Elsevier B.V.

  4. Speciation of Metals and Assessment of Contamination in Surface Sediments from Daya Bay, South China Sea

    Directory of Open Access Journals (Sweden)

    Jie Yang

    2014-12-01

    Full Text Available The contents, speciation, source factors and potential ecological risks of the selected metals (Cr, Ni, Cu, Pb, Zn, Cd and As were analyzed in surface sediments from Daya Bay (DYB. The results show that, with the exception of Pb, metal concentrations have decreased at all sites over the past decade. The distribution features of these concentrations represent a ring shape that descends from shore to bay by varying degrees. Speciation analysis showed that Cr, Ni, Cu, Zn and As exist mainly in the residual fraction and, thus, are of low bioavailability, while Cd and Pb were found to be abundant in the non-residual fraction and, thus, have high potential mobility. The ratio of heavy metals in non-residual form in descending order is Pb (78.83%, Cd (78.65%, Cu (48.54%, Zn (48.10%, Ni (38.31%, Cr (28.43% and As (27.76%. The ratio of Pb content is the highest, meaning the highest mobility of Pb. The metals’ potential ecological risks to the environment were also assessed using the methods of the mean effect range-median quotient and the criteria of risk assessment code. The results showed that Cd presents the highest risk, and Pb and Cu are generally considered to be medium risks in the sub-basins of Daya Bay. The principal component analysis (PCA revealed that natural coastal weathering and erosion of rock caused the highest input, followed by mariculture and industrial wastewater and, finally, domestic sewage discharge.

  5. Heavy metals and metalloids in the surface sediments of the Xiangjiang River, Hunan, China: distribution, contamination, and ecological risk assessment.

    Science.gov (United States)

    Chai, Liyuan; Li, Huan; Yang, Zhihui; Min, Xiaobo; Liao, Qi; Liu, Yi; Men, Shuhui; Yan, Yanan; Xu, Jixin

    2017-01-01

    Here, we aim to determine the distribution, ecological risk and sources of heavy metals and metalloids in the surface sediments of the Xiangjiang River, Hunan Province, China. Sixty-four surface sediment samples were collected in 16 sites of the Xiangjiang River, and the concentrations of ten heavy metals and metalloids (Mn, Zn, Cr, V, Pb, Cu, As, Ni, Co, and Cd) in the sediment samples were investigated using an inductively coupled plasma mass spectrometer (ICP-MS) and an atomic fluorescence spectrophotometer (AFS), respectively. The results showed that the mean concentrations of the ten heavy metals and metalloids in the sediment samples followed the order Mn > Zn > Cr > V > Pb > Cu > As ≈ Ni >Co > Cd. The geoaccumulation index (I geo ), enrichment factor (EF), modified degree of contamination (mC d ), and potential ecological risk index (RI) revealed that Cd, followed by Pb, Zn, and Cu, caused severely contaminated and posed very highly potential ecological risk in the Xiangjiang River, especially in Shuikoushan of Hengyang, Xiawan of Zhuzhou, and Yijiawan of Xiangtan. The Pearson's correlation coefficient (PCC) analysis, principal component analysis (PCA), and hierarchical cluster analysis (HCA) indicated that the ten heavy metals and metalloids in the sampling sediments of the Xiangjiang River were classified into three groups: (1) Cd, Pb, Zn, and Cu which possibly originated from Shuikoushan, Xiawan, and Yijiawan clustering Pb-Zn mining and smelting industries; (2) Co, V, Ni, Cr, and Al from natural resources; and (3) Mn and As. Therefore, our results suggest that anthropogenic activities, especially mining and smelting, have caused severe contamination of Cd, Pb, Zn, and Cu and posed very high potential ecological risk in the Xiangjiang River.

  6. Age, distribution, and significance within a sediment budget, of in-channel depositional surfaces in the Normanby River, Queensland, Australia

    Science.gov (United States)

    Pietsch, T. J.; Brooks, A. P.; Spencer, J.; Olley, J. M.; Borombovits, D.

    2015-06-01

    We present the results of investigations into alluvial deposition in the catchment of the Normanby River, which flows into Princess Charlotte Bay (PCB) in the northern part of the Great Barrier Reef Lagoon. Our focus is on the fine fraction (attached bars or inset or inner floodplains, these more or less flat-lying surfaces within the macro-channel have hitherto received little attention in sediment budgeting models. We use high resolution LiDAR based mapping combined with optical dating of exposures cut into these in-channel deposits to compare their aggradation rates with those found in other depositional zones in the catchment, namely the floodplain and coastal plain. In total 59 single grain OSL dates were produced across 21 stratigraphic profiles at 14 sites distributed though the 24 226 km2 catchment. In-channel storage in these inset features is a significant component of the contemporary fine sediment budget (i.e. recent decades/last century), annually equivalent to more than 50% of the volume entering the channel network from hillslopes and subsoil sources. Therefore, at the very least, in-channel storage of fine material needs to be incorporated into sediment budgeting exercises. Furthermore, deposition within the channel has occurred in multiple locations coincident in time with accelerated sediment production following European settlement. Generally, this has occurred on a subset of the features we have examined here, namely linear bench features low in the channel. This suggests that accelerated aggradation on in-channel depositional surfaces has been in part a response to accelerated erosion within the catchment. The entire contribution of ~ 370 kilotonnes per annum of fine sediment estimated to have been produced by alluvial gully erosion over the last ~ 100 years can be accounted for by that stored as in-channel alluvium. These features therefore can play an important role in mitigating the impact on the receiving water of accelerated erosion.

  7. Oil contamination in surface sediment of Anzali Wetland in Iran is primarily even carbon number n-alkanes.

    Science.gov (United States)

    Azimi-Yancheshmeh, Rokhsareh; Riyahi-Bakhtiari, Alireza; Savabieasfahani, Mozhgan

    2017-10-29

    To determine the extent of oil contamination and biodegradation in Anzali Wetland of Iran, we examined aliphatic hydrocarbons in surface sediment of this area (n=20). Petroleum hydrocarbon levels (mean 1585 ± 1117; range 316 to 4358 μg g- 1 dry weight) were similar in value to reports from other highly contaminated areas, such as New York Bight, Saudi and Kuwaiti coasts of the Persian Gulf, and Dubai shorelines. Even carbon homologs dominated distribution of n-alkanes in surface sediment of Anzali, which is rarely reported elsewhere. Multiple factors used in our study point to petrogenic source for n-alkanes in Anzali Wetland. Anzali receives multiple industrial and agricultural runoffs from the surrounding area. Shipping industry and oil industry are responsible for a major portion of pollutants entering Anzali. Municipal wastewater discharges are another source of Anzali pollution. To determine why even carbon number n-alkanes predominate in Anzali, we examined the following indices: existence of unresolved complex mixtures (UCM), ratio of UCM to resolved alkanes (RA), ratio of low-molecular weight to high-molecular weight molecules, presence of degraded oil residue, high-relative biodegradation, and the degree of hydrocarbon weathering in the surface sediment of the area. Our findings corroborate with such predominance.

  8. Microbial community structure of surface sediments from a tropical estuarine environment using next generation sequencing

    Digital Repository Service at National Institute of Oceanography (India)

    Khandeparker, L.; Kuchi, N.; Kale, D.; Anil, A.C.

    Microbial community structure was analyzed from tropical monsoon influenced Mandovi-Zuari (Ma-Zu) estuarine sediment by means of Next Gen Sequencing (NGS) approach using Ion Torrent PGM™. The sequencing generated 80,282 raw sequence reads. Barcoding...

  9. Evaluation And Characterization Of Trace Metals Contamination In The Surface Sediment Using Pollution Load Index PLI And Geo-Accumulation Index Igeo Of Ona River Western Nigeria

    Directory of Open Access Journals (Sweden)

    Andem

    2015-01-01

    Full Text Available Abstract Evaluation and Characterization of Trace Metal Contamination in the Surface Sediment Using Pollution Load Index PLI and Geo-accumulation Index Igeo Index of Ona River was conducted for six months. From the result of this study the mean values of lead ranged between 0.004 mgkg and 0.330 mgkg while the mean iron was highest 5.05 mgkg in station 4 and lowest 2.26 mgkg in station 5. The mean chromium value ranged from 0.007 mgkg station 1 and 2 to 0.021 mgkg station 3 and 4. The mean copper was highest 3.97 mgkg in station 1 and lowest 0.008 mgkg in station 2. Analysis of variance ANOVA revealed the same trend in spatial variation of these heavy metals. There was a significant difference P 0.05 in lead chromium and copper among the study sampling stations and insignificant difference P0.05 in iron among the study sampling station. The PLI values recorded for all the stations were below 1. Thus the sediment of the study stretch that Ona River is unpolluted. The Igeo values for chromium and iron fall in class 0 in all the five sampling stations indicating that there is no pollution from these metals in the Ona River sediments lead fall in class 3 in station 4indicating moderately to heavily contaminated condition and class 0in station 1 2 3 and 5 and copper fall in class 3 in station 4 and 5 in class 6 in station 3 indicating extremely contaminated condition. The Igeo values were consistent with those derived for PLI. All trace metals had concentrations below the EPA regulatory limits for sediment except iron. From the results of this study sediment quality reflects the impacts of anthropogenic activities on quality of the river. However the continuous build-up of the metal contaminants can be checked if relevant government agencies ensure strict compliant of industrial standards which stipulate treatment of industrial waste before discharging such contaminated effluentswastes into River. Therefore perpetual assessment is highly recommended

  10. Heavy metals pollution status in surface sediments (rivers and artifical lakes, Serbia)

    Science.gov (United States)

    Sakan, Sanja; Đorđević, Dragana

    2017-04-01

    Potentially hazardous trace elements, often in literature referred as "heavy metals", are deemed serious pollutants due to their toxicity, persistence and non-degradability in the environment. These elements play an important role in extent of water pollution and threaten the health of populations and ecosystems. As the sink of heavy metals, sediment beds adsorb metals in quantities that are many times higher than those found in the water column in the long-term polluted water environment. It is believed that most of the metal content, as much as 90% in aquatic sediments is bound to sediments. Metal contamination in these sediments could be directly affect the river water quality, resulting in potential consequences to the sensitive lowest levels of the food chain and ultimately to human health. The objective of this research was the evaluation of heavy metal contamination level in sediments of the most important rivers and artificial lakes in Serbia. The heavy metal enrichment in studied sediments was conducted by using: determination of total metal content, sequential extraction procedure for the fractionation of studied elements, quantification of the metal enrichment degree in the sediments by calculating geo-accumulation indices, determination of actual and potential element availability and application of BRAI index for the assessment of heavy metal bioavailability. The sediments were found to be contaminated by heavy metals to various extents, mostly with Cd, Cu, and Zn. The significant variation in heavy metal distribution among samples collected in this large region, encompassing all Serbian watersheds, suggests the selective contamination of sediments by heavy metals. Elevated concentrations of elements in most cases were detected in samples of river sediments, since artificial lake reservoirs are usually built in rural areas, where the less anthropogenic pollution. Rivers often flow through the towns and these water basins less or more loaded

  11. Sub-fossils of cladocerans in the surface sediment of 135 lakes as proxies for community structure of zooplankton, fish abundance and lake temperature

    DEFF Research Database (Denmark)

    Jeppesen, E.; Jensen, J. P.; Lauridsen, T. L.

    2003-01-01

    To elucidate the possibilities of using zooplankton remains in the surface sediment to describe present-days community structure and population dynamics of zooplankton, fish abundance and temperature, we compared contemporary data sampled in the pelagial during summer with the sediment record fro...

  12. Impacts of dust aerosol and adjacency effects on the accuracy of Landsat 8 and RapidEye surface reflectances

    KAUST Repository

    Houborg, Rasmus

    2017-03-29

    The atmospheric correction of satellite data is challenging over desert agricultural systems, due to the relatively high aerosol optical thicknesses (τ550), bright soils, and a heterogeneous surface reflectance field. Indeed, the contribution of reflected radiation from adjacent pixels scattered into the field of view of a target pixel is considerable and can significantly affect the fidelity of retrieved reflectances. In this study, uncertainties and quantitative errors associated with the atmospheric correction of multi-spectral Landsat 8 and RapidEye data were characterized over a desert agricultural landscape in Saudi Arabia. Surface reflectances were retrieved using an implementation of the 6SV atmospheric correction code, and validated against field collected spectroradiometer measurements over desert, cultivated soil, and vegetated surface targets. A combination of satellite and Aerosol Robotic Network (AERONET) data were used to parameterize aerosol properties and atmospheric state parameters. With optimal specification of τ550 and aerosol optical properties and correction for adjacency effects, the relative Mean Absolute Deviation (MAD) for all bands combined was 5.4% for RapidEye and 6.8% for Landsat 8. However uncertainties associated with satellite-based τ550 retrievals were shown to introduce significant error into the reflectance estimates. With respect to deriving common vegetation indices from corrected reflectance data, the Normalized Difference Vegetation Index (NDVI) was associated with the smallest errors (3–8% MAD). Surface reflectance errors were highest for bands in the visible part of the spectrum, particularly the blue band (5–16%), while there was more consistency within the red-edge (~ 5%) and near-infrared (5–7%). Results were generally better constrained when a τ550-dependent aerosol model for desert dust particles, parameterized on the basis of nearby AERONET site data, was used in place of a generic rural or background

  13. Antagonistic Effects of Ocean Acidification and Rising Sea Surface Temperature on the Dissolution of Coral Reef Carbonate Sediments

    Directory of Open Access Journals (Sweden)

    Daniel Trnovsky

    2016-11-01

    Full Text Available Increasing atmospheric CO2 is raising sea surface temperature (SST and increasing seawater CO2 concentrations, resulting in a lower oceanic pH (ocean acidification; OA, which is expected to reduce the accretion of coral reef ecosystems. Although sediments comprise most of the calcium carbonate (CaCO3 within coral reefs, no in situ studies have looked at the combined effects of increased SST and OA on the dissolution of coral reef CaCO3 sediments. In situ benthic chamber incubations were used to measure dissolution rates in permeable CaCO3 sands under future OA and SST scenarios in a coral reef lagoon on Australia’s Great Barrier Reef (Heron Island. End of century (2100 simulations (temperature +2.7°C and pH -0.3 shifted carbonate sediments from net precipitating to net dissolving. Warming increased the rate of benthic respiration (R by 29% per 1°C and lowered the ratio of productivity to respiration (P/R; ΔP/R = -0.23, which increased the rate of CaCO3 sediment dissolution (average net increase of 18.9 mmol CaCO3 m-2 d-1 for business as usual scenarios. This is most likely due to the influence of warming on benthic P/R which, in turn, was an important control on sediment dissolution through the respiratory production of CO2. The effect of increasing CO2 on CaCO3 sediment dissolution (average net increase of 6.5 mmol CaCO3 m-2 d-1 for business as usual scenarios was significantly less than the effect of warming. However, the combined effect of increasing both SST and pCO2 on CaCO3 sediment dissolution was non-additive (average net increase of 5.6 mmol CaCO3 m-2 d-1 due to the different responses of the benthic community. This study highlights that benthic biogeochemical processes such as metabolism and associated CaCO3 sediment dissolution respond rapidly to changes in SST and OA, and that the response to multiple environmental changes are not necessarily additive.

  14. Sediment exchange between groin fields and main-stream

    Science.gov (United States)

    Qin, Jie; Zhong, Deyu; Wu, Teng; Wu, Lingli

    2017-10-01

    Sediment exchange between groin fields and the main-stream influences the transport and distribution of polluted sediment that represents a hazard for rivers and neighboring floodplains. Despite its practical significance, little research has been done on the sediment exchange process itself, and existing studies used to estimate the sediment exchange by morphological change. The sediment exchange process, however, differs from morphological variation and includes two behaviors: the entrance of main-stream sediment into groin fields and the movement of groin field sediment out of groin fields. Therefore, this study aims at examining this exchange process and exploring the mechanisms of different exchange phenomena. Experiments were conducted in a mobile-bed laboratory flume by using a novel experimental method that successfully separates the movement of groin fields sediment from that of main-stream sediment. In addition to traditional measurements, such as measurements of morphological changes, surface flow velocities, and bed-form propagation, the deposition of main-stream sediment in groin fields is measured in detail. The results demonstrate that morphological change cannot reflect the sediment exchange process. The deposition of main-stream sediment in groin fields is determined by the dynamics of sediment movement, in which bedload- and suspended-sediment-dominated processes exhibit different deposition patterns. The movement of groin field sediment out of groin fields is determined mainly by local scouring around groins.

  15. Heavy metal pollution and Pb isotopic tracing in the intertidal surface sediments of Quanzhou Bay, southeast coast of China.

    Science.gov (United States)

    Yu, Ruilian; Zhang, Weifang; Hu, Gongren; Lin, Chengqi; Yang, Qiuli

    2016-04-15

    Concentrations of 16 heavy metals and Pb isotopic ratios in the intertidal surface sediments of Quanzhou Bay were determined to study the pollution level of heavy metals and the sources of Pb. The results showed that most concentrations of Cd, Sn, Mn, Cu, Zn, Cr, Pb, Hg, Ni, Co, Cs, Fe and V were higher than the background values, while most concentrations of Ti, Sb and Sr were lower than the background values. The mean concentrations of Cu, Zn, Pb, Cr and Cd exceeded the first-grade criteria of Chinese marine sediment quality. The geo-accumulation indexes revealed that the sediments had been polluted by some heavy metals. The results of Pb isotopic tracing indicated that the total Pb in the sediments were mainly from parent material, industrial emission and vehicle exhaust with the mean contributions of 38.2%, 51.3% and 10.5%, respectively, calculated by a three-end-member model of Pb isotopic ratios. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. The Synergic Characteristics of Surface Water Pollution and Sediment Pollution with Heavy Metals in the Haihe River Basin, Northern China

    Directory of Open Access Journals (Sweden)

    Peiru Kong

    2018-01-01

    Full Text Available Aquatic environmental deterioration is becoming a serious problem due to rapid urbanization and economic development, particularly in developing countries. As two important components of the aquatic environment, water quality and sediment pollution are widely considered to be concerns; however, they are considered separately in most cases. The relationship between water quality and sediment pollution with heavy metals has been little addressed. In this study, the Haihe River Basin (HRB, one of the most polluted areas in China, was used as a case study, and the eutrophication index (EI and the potential ecological risk index (RI were employed to evaluate water quality and sediment pollution of heavy metals, respectively. The results showed that generally in the HRB, the water quality was poor, while the risk of heavy metal pollution was relatively low. Surface water quality was mainly influenced by sewage discharges from human daily life, and heavy metal pollution was affected by industry structure, in that the areas with resource/energy consumption industries and high-pollution industries often have high risks of heavy metal pollution Synergic pollution from water eutrophication and sediment pollution with heavy metals was found, especially in the central areas of the HRB, and it was largely dependent on the type of human activities. In the places with intensive human activities, such as secondary industry, eutrophication occurred simultaneously with heavy metal pollution, other than in less human-affected areas. These findings are useful for planning aquatic environment protections and river ecosystem management.

  17. Characterizing bacterial communities in tilapia pond surface sediment and their responses to pond differences and temporal variations.

    Science.gov (United States)

    Fan, Limin; Barry, Kamira; Hu, Gengdong; Meng, Shunlong; Song, Chao; Qiu, Liping; Zheng, Yao; Wu, Wei; Qu, Jianhong; Chen, Jiazhang; Xu, Pao

    2017-01-01

    Bacterial community compositions in the surface sediment of tilapia ponds and their responses to pond characteristics or seasonal variations were investigated. For that, three ponds with different stocking densities were selected to collect the samples. And the method of Illumina high-throughput sequencing was used to amplify the bacterial 16S rRNA genes. A total of 662, 876 valid reads and 5649 operational taxonomic units were obtained. Further analysis showed that the dominant phyla in all three ponds were Proteobacteria, Bacteroidetes, Chloroflexi, and Acidobacteria. The phyla Planctomycetes, Firmicutes, Chlorobi, and Spirochaetae were also relatively abundant. Among the eight phyla, the abundances of only Proteobacteria, Bacteroidetes, Firmicutes, and Spirochaetae were affected by seasonal variations, while seven of these (with the exception of Acidobacteria) were affected by pond differences. A comprehensive analysis of the richness and diversity of the bacterial 16S rRNA gene, and of the similarity in bacterial community composition in sediment also showed that the communities in tilapia pond sediment were shaped more by pond differences than by seasonal variations. Linear discriminant analysis further indicated that the influences of pond characteristics on sediment bacterial communities might be related to feed coefficients and stocking densities of genetically improved farmed tilapia (GIFT).

  18. Spatial distribution, ecological and health risk assessment of heavy metals in marine surface sediments and coastal seawaters of fringing coral reefs of the Persian Gulf, Iran.

    Science.gov (United States)

    Ranjbar Jafarabadi, Ali; Riyahi Bakhtiyari, Alireza; Shadmehri Toosi, Amirhossein; Jadot, Catherine

    2017-10-01

    Concentrations of 13 heavy metals (Al, Fe, Mn, Zn, Cu, Cr, Co, Ni, V, As, Cd, Hg, Pb) in 360 reef surface sediments (0-5 cm) and coastal seawater samples from ten coral Islands in the Persian Gulf were analyzed to determine their spatial distribution and potential ecological risks. Different sediment quality indices were applied to assess the surface sediment quality. The mean concentrations of metals in studied sediments followed the order: Al > Fe > Ni > V > Mn > Zn > Cu > Cr > Co > As > Cd > Pb > As. Average Cd and Hg exceeded coastal background levels at most sampling sites. With the exception of As, concentrations of heavy metals decreased progressively from the west to the east of the Persian Gulf. Based on the Enrichment Factor (EF) and Potential Ecological Risk Index (RI), concentrations of V, Ni, Hg and Cd indicated moderate contamination and is of some concern. The mean values of heavy metals Toxic Units (TUs) were calculated in the following order: Hg (0.75)> Cr (0.41)> Cd (0.27)> As (0.23)> Cu (0.12)> Zn (0.05)> Pb (0.009). Furthermore, the mean contributing ratios of six heavy metals to Toxic Risk Index (TRI) values were 79% for Hg, 11.48% for Cd, 6.16% for Cr, 3.27% for Cu, 0.07% for Zn and 0.01% for Pb. Calculated values of potential ecological risk factor, revealed that the risk of the heavy metals followed the order Cd > Pb > Ni > Cr > V > Cu > Zn. The results reflected that the level of heavy metals, especially Hg and Cd, are on rise due to emerging oil exploration, industrial development, and oil refineries along the entire Gulf. Fe, Mn, Cu, Zn, V and Ni concentrations in seawater were significantly higher (p heavy metals in the sampling sites. A health risk assessment using the hazard quotient index (HQ) recommended by the USEPA suggests that there is no adverse health effect through dermal exposure, and there is no carcinogenic and non-carcinogenic harm to human health. Copyright © 2017 Elsevier Ltd. All

  19. Updating Landsat time series of surface-reflectance composites and forest change products with new observations

    Science.gov (United States)

    Hermosilla, Txomin; Wulder, Michael A.; White, Joanne C.; Coops, Nicholas C.; Hobart, Geordie W.

    2017-12-01

    The use of time series satellite data allows for the temporally dense, systematic, transparent, and synoptic capture of land dynamics over time. Subsequent to the opening of the Landsat archive, several time series approaches for characterizing landscape change have been developed, often representing a particular analytical time window. The information richness and widespread utility of these time series data have created a need to maintain the currency of time series information via the addition of new data, as it becomes available. When an existing time series is temporally extended, it is critical that previously generated change information remains consistent, thereby not altering reported change statistics or science outcomes based on that change information. In this research, we investigate the impacts and implications of adding additional years to an existing 29-year annual Landsat time series for forest change. To do so, we undertook a spatially explicit comparison of the 29 overlapping years of a time series representing 1984-2012, with a time series representing 1984-2016. Surface reflectance values, and presence, year, and type of change were compared. We found that the addition of years to extend the time series had minimal effect on the annual surface reflectance composites, with slight band-specific differences (r ≥ 0.1) in the final years of the original time series being updated. The area of stand replacing disturbances and determination of change year are virtually unchanged for the overlapping period between the two time-series products. Over the overlapping temporal period (1984-2012), the total area of change differs by 0.53%, equating to an annual difference in change area of 0.019%. Overall, the spatial and temporal agreement of the changes detected by both time series was 96%. Further, our findings suggest that the entire pre-existing historic time series does not need to be re-processed during the update process. Critically, given the time

  20. Objective and Subjective Evaluation of Reflecting and Diffusing Surfaces in Auditoria

    Science.gov (United States)

    Cox, Trevor John

    Available from UMI in association with The British Library. Requires signed TDF. The performance of reflectors and diffusers used in auditoria have been evaluated both objectively and subjectively. Two accurate systems have been developed to measure the scattering from surfaces via the cross correlation function. These have been used to measure the scattering from plane panels, curved panels and quadratic residue diffusers (QRDs). The scattering measurements have been used to test theoretical prediction methods based on the Helmholtz-Kirchhoff integral equation. Accurate prediction methods were found for all surfaces tested. The limitations of the more approximate methods have been defined. The assumptions behind Schroeder's design of the QRD have been tested and the local reacting admittance assumption found to be valid over a wide frequency range. It was found that the QRD only produces uniform scattering at low frequencies. For an on-axis source the scattering from a curved panel was as good as from a QRD. For an oblique source the QRD produced much more uniform scattering than the curved panel. The subjective measurements evaluated the smallest perceivable change in the early sound field, the part most influenced by reflectors and diffusers. A natural sounding simulation of a concert hall field within an anechoic chamber was used. Standard objective parameters were reasonable values when compared to values found in real halls and subjective preference measurements. A difference limen was measured for early lateral energy fraction (.048 +/-.005); inter aural cross correlation (.075 +/-.008); clarity index (.67 +/-.13 dB); and centre time (8.6 +/- 1.6 ms). It was found that: (i) when changes are made to diffusers and reflectors, changes in spatial impression will usually be larger than those in clarity; and (ii) acousticians can gain most by paying attention to lateral sound in auditoria. It was also found that: (i) diffuse reflections in the early sound field

  1. Spatial Variation, Pollution Assessment and Source Identification of Major Nutrients in Surface Sediments of Nansi Lake, China

    Directory of Open Access Journals (Sweden)

    Longfeng Wang

    2017-06-01

    Full Text Available Nansi Lake has been seriously affected by intensive anthropogenic activities in recent years. In this study, an extensive survey on spatial variation, pollution assessment as well as the possible sources identification of major nutrients (Total phosphorus: TP, Total nitrogen: TN, and Total organic carbon: TOC in the surface sediments of Nansi Lake was conducted. Results showed that the mean contents of TP, TN and TOC were 1.13-, 5.40- and 2.50- fold higher than their background values respectively. Most of the TN and TOC contents in the surface sediments of Nansi Lake were four times as high or higher and twice as high or higher than the background values except the Zhaoyang sub-lake, and the spatial distribution of TN and TOC contents were remarkably similar over a large area. Nearly all the TP contents in the surface sediments of Nansi Lake were all higher than its background values except most part of the Zhaoyang sub-lake. Based on the enrichment factor (EF and the organic pollution evaluation index (Org-index, TP, TOC and TN showed minor enrichment (1.13, minor enrichment (2.50 and moderately severe enrichment (5.40, respectively, and most part of the Dushan sub-lake and the vicinity of the Weishan island were in moderate or heavy sediments organic pollution, while the other parts were clean. Moreover, according to the results of multivariate statistical analysis, we deduced that anthropogenic TN and TOC were mainly came from industrial sources including enterprises distributed in Jining, Yanzhou and Zoucheng along with iron and steel industries distributed in the southern of the Weishan sub-lake, whereas TP mainly originated from runoff and soil erosion coming from agricultural lands located in Heze city and Weishan island, the local aquacultural activities as well as the domestic sewage discharge of Jining city.

  2. Uranium(VI) sorption on iron oxides in Hanford Site sediment: Application of a surface complexation model

    International Nuclear Information System (INIS)

    Um, Wooyong; Serne, R. Jeffrey; Brown, Christopher F.; Rod, Kenton A.

    2008-01-01

    Sorption of U(VI) on Hanford fine sand (HFS) with varying Fe-oxide (especially ferrihydrite) contents showed that U(VI) sorption increased with the incremental addition of synthetic ferrihydrite into HFS, consistent with ferrihydrite being one of the most reactive U(VI) sorbents present in natural sediments. Surface complexation model (SCM) calculations for U(VI) sorption, using only U(VI) surface-reaction constants obtained from U(VI) sorption data on freshly synthesized ferrihydrite at different pHs, were similar to the measured U(VI) sorption results on pure synthetic ferrihydrite and on HFS with high contents of ferrihydrite (5 wt%) added. However, the SCM prediction using only U(VI) sorption reactions and constants for synthetic ferrihydrite overestimated U(VI) sorption on the natural HFS or HFS with addition of low amounts of added ferrihydrite (1 wt% added). Over-predicted U(VI) sorption was attributed to reduced reactivity of natural ferrihydrite present in Hanford Site sediments, compared to freshly prepared synthetic ferrihydrite. Even though the SCM general composite (GC) approach is considered to be a semi-quantitative estimation technique for contaminant sorption, which requires systematic experimental data on the sorbent-sorbate system being studied to obtain credible SCM parameters, the general composite SCM model was still found to be a useful technique for describing U(VI) sorption on natural sediments. Based on U(VI) batch sorption results, two simple U(VI) monodentate surface species, SO U O 2 HCO 3 and SO U O 2 OH on ferrihydrite and phyllosillicate in HFS, respectively, can be successfully used to describe U(VI) sorption onto Hanford Site sediment contacting varying geochemical solutions

  3. Specular and non-specular X-ray reflection from a single-crystal molybdenum mirror surface

    CERN Document Server

    Mizusawa, M

    2003-01-01

    The surface morphology of a super-polished mirror of single-crystal molybdenum has been studied by grazing-incidence X-ray reflection. It yields a rather high specular reflectivity (82.0%) for 16.0 keV X-rays below the critical angle. The data suggest that the mirror has a small roughness (0.7 nm rms) unlike other metal mirrors, but, on the other hand, strongly damaged layers (6.35 nm in total) exist at the near surface. It has been also found that the surface has a large correlation length (>3 mu m) and a small Hurst parameter (0.2-0.3) from the non-specular reflection.

  4. Using public participation to sample trace metals in lake surface sediments: the OPAL Metals Survey.

    Science.gov (United States)

    Turner, S D; Rose, N L; Goldsmith, B; Bearcock, J M; Scheib, C; Yang, H

    2017-05-01

    Members of the public in England were invited in 2010 to take part in a national metals survey, by collecting samples of littoral sediment from a standing water body for geochemical analysis. To our knowledge, this is the first national sediment metals survey using public participation and reveals a snapshot of the extent of metals contamination in ponds and lakes across England. Hg, Ni, Cu, Zn and Pb concentrations exceeding sediment quality guidelines for the health of aquatic biota are ubiquitous in ponds and lakes, not just in areas with a legacy of industrial activity. To validate the public sampling approach, a calibration exercise was conducted at ten water bodies selected to represent a range of lakes found across England. Sediment concentrations of Hg, Ni, Cu, Zn and Pb were measured in samples of soil, stream and littoral and deep water sediment to assess inputs. Significant differences between littoral sediment metal concentrations occur due to local variability, but also organic content, especially in upland, peat soil catchments. Variability of metal concentrations between littoral samples is shown to be low in small (complex inputs and variation in organic content of littoral samples have a greater variability. Collection of littoral sediments in small lakes and ponds, with or without voluntary participation, can provide a reliable sampling technique for the preliminary assessment of metal contamination in standing waters. However, the heterogeneity of geology, soils and history/extent of metal contamination in the English landscape, combined with the random nature of sample collection, shows that systematic sampling for evaluating the full extent of metal contamination in lakes is still required.

  5. [Light reflection zone on the incisors' surface--a new parameter for smile esthetics evaluation].

    Science.gov (United States)

    Brezniak, N; Wasserstein, A; Shmuli, T

    2012-07-01

    The light reflection zone (LRZ) is a bright white dot or area that appears on the surface of the maxillary central incisors and/or the gingiva of the front teeth, visible in intra-oral and smile extra-oral photographs. Previously, a positive correlation between the location of the LRZ as observed in intra-oral frontal photographs and the inclination of the upper central incisors as measured on lateral headfims was found. The purpose of this study was to find whether this LRZ location can serve as a new parameter influencing the level of smile esthetics. Twelve pairs of facial photographs, including 10 of ordinary smiling persons and 2 of smiling models, were presented to 138 participants. The only difference between each pair was the location of the LRZ that was moved, compared to the original photograph, gingivally or incisally respectively, using Photoshop (Adobe). Each participant was asked to mark whether he/she noticed a difference between the 2 pictures, and if so, to score the nicer smile. Data analysis was carried out using Chi square test and Fisher's exact test (SPSS v17). The results showed that most of the participants did not recognize the differences between the pairs however, when differences were recognized, most of the participants pointed on the smile where the LRZ was located gingivally as the nicer one. This result was with statistical significance for the 2 models (p < 0.05), In conclusion, the LRZ is a new, yet unrecognized, parameter that can serve as a tool for the diagnosis of esthetic smile. The general population defines a nicer smile when the LRZ is located in the gingival area of the upper central incisors' surface rather than the incisal third. The LRZ should probably be studied not only in Orthodontics but also in other branches of dentistry.

  6. Improved Aerosol Optical Thickness, Columnar Water Vapor, and Surface Reflectance Retrieval from Combined CASI and SASI Airborne Hyperspectral Sensors

    Directory of Open Access Journals (Sweden)

    Hang Yang

    2017-02-01

    Full Text Available An increasingly common requirement in remote sensing is the integration of hyperspectral data collected simultaneously from different sensors (and fore-optics operating across different wavelength ranges. Data from one module are often relied on to correct information in the other, such as aerosol optical thickness (AOT and columnar water vapor (CWV. This paper describes problems associated with this process and recommends an improved strategy for processing remote sensing data, collected from both visible to near-infrared and shortwave infrared modules, to retrieve accurate AOT, CWV, and surface reflectance values. This strategy includes a workflow for radiometric and spatial cross-calibration and a method to retrieve atmospheric parameters and surface reflectance based on a radiative transfer function. This method was tested using data collected with the Compact Airborne Spectrographic Imager (CASI and SWIR Airborne Spectrographic Imager (SASI from a site in Huailai County, Hebei Province, China. Various methods for retrieving AOT and CWV specific to this region were assessed. The results showed that retrieving AOT from the remote sensing data required establishing empirical relationships between 465.6 nm/659 nm and 2105 nm, augmented by ground-based reflectance validation data, and minimizing the merit function based on AOT@550 nm optimization. The paper also extends the second-order difference algorithm (SODA method using Powell’s methods to optimize CWV retrieval. The resulting CWV image has fewer residual surface features compared with the standard methods. The derived remote sensing surface reflectance correlated significantly with the ground spectra of comparable vegetation, cement road and soil targets. Therefore, the method proposed in this paper is reliable enough for integrated atmospheric correction and surface reflectance retrieval from hyperspectral remote sensing data. This study provides a good reference for surface

  7. Risk Assessment of Heavy Metals in Surface Sediments from the Yanghe River, China

    Directory of Open Access Journals (Sweden)

    Jing Li

    2014-11-01

    Full Text Available The magnitude and ecological relevance of metal pollution from the upstream of water sources after emergency pollution events was investigated by applying a set of complementary sediment quality assessment methods: (1 geochemical assessment based on background value (the geoaccumulation index; (2 comparisons with sediment quality guidelines (SQGs; (3 an evaluation of the combined pollution according to the risk index (RI; and (4 investigation of the chemical patterns of target heavy metals (Cd, Zn, Cr, Pb, Ni. The geoaccumulation indices (Igeo suggested that the magnitude of heavy metal pollution of the sediment of Yanghe River decreased in the order of Cd > Zn > Pb > Cr > Ni. Risk analysis also suggested that Cd and Zn concentrations were sufficiently elevated as to cause adverse biological effects in this study area. According to the RI values, 27% of total sampling sites showed considerable ecological risk for the water body, and 53% of total sampling sites showed very high ecological risk for the waterbody. Sediment-bound Cd was found to be predominantly associated with the exchangeable phase of the sediment (25%–68%, while Cr, Ni, Zn and Pb showed the strongest association with the residual fractions (60%–92%, 53%–67%, 24%–85% and 35%–67%, respectively.

  8. Distribution of polycyclic aromatic hydrocarbons in water and surface sediments from Daya Bay, China

    International Nuclear Information System (INIS)

    Zhou, J.L.; Maskaoui, K.

    2003-01-01

    Findings indicate an urgent need to establish a monitoring program for persistent organic pollutants in water and sediment. - Marine culture is thriving in China and represents a major component of the regional economy in coastal zones, yet the environmental quality of many of those areas has never been studied. This paper attempts to investigate the quality status of Daya Bay, a key aquaculture area in China. The levels of 16 polycyclic aromatic hydrocarbons (PAHs) were determined in water and sediment samples of the bay. The total concentrations of 16 PAHs varied from 4228 to 29325 ng l -1 in water, and from 115 to 1134 ng g -1 dry weight in sediments. In comparison to many other marine systems studied, the PAH levels in Daya Bay waters were relatively high, and at six sites they were sufficiently high (>10 μg l -1 ) to cause acute toxicity. The PAH composition pattern in sediments suggest dominance by medium to high molecular weight compounds, and the ratio of certain related PAHs indicate important pyrolytic and petrogenic sources. Further analysis showed that the distribution coefficient (K D ) increased with the particular organic carbon content of sediments, consistent with the PAH partition theory. The organic carbon normalised distribution coefficient (K oc ) also increased with the compounds' octanol/water partition coefficient (K ow ), confirming the potential applicability of the linear free energy relationships in the modelling and prediction of PAH behaviour in marine environments

  9. How Can Polarization States of Reflected Light from Snow Surfaces Inform Us on Surface Normals and Ultimately Snow Grain Size Measurements?

    Science.gov (United States)

    Schneider, A. M.; Flanner, M.; Yang, P.; Yi, B.; Huang, X.; Feldman, D.

    2016-12-01

    The Snow Grain Size and Pollution (SGSP) algorithm is a method applied to Moderate Resolution Imaging Spectroradiometer data to estimate snow grain size from space-borne measurements. Previous studies validate and quantify potential sources of error in this method, but because it assumes flat snow surfaces, however, large scale variations in surface normals can cause biases in its estimates due to its dependence on solar and observation zenith angles. To address these variations, we apply the Monte Carlo method for photon transport using data containing the single scattering properties of different ice crystals to calculate polarization states of reflected monochromatic light at 1500nm from modeled snow surfaces. We evaluate the dependence of these polarization states on solar and observation geometry at 1500nm because multiple scattering is generally a mechanism for depolarization and the ice crystals are relatively absorptive at this wavelength. Using 1500nm thus results in a higher number of reflected photons undergoing fewer scattering events, increasing the likelihood of reflected light having higher degrees of polarization. In evaluating the validity of the model, we find agreement with previous studies pertaining to near-infrared spectral directional hemispherical reflectance (i.e. black-sky albedo) and similarities in measured bidirectional reflectance factors, but few studies exist modeling polarization states of reflected light from snow surfaces. Here, we present novel results pertaining to calculated polarization states and compare dependences on solar and observation geometry for different idealized snow surfaces. If these dependencies are consistent across different ice particle shapes and sizes, then these findings could inform the SGSP algorithm by providing useful relationships between measurable physical quantities and solar and observation geometry to better understand variations in snow surface normals from remote sensing observations.

  10. Contaminant profiles for surface water, sediment, flora and fauna associated with the mangrove fringe along middle and lower East Tampa Bay

    Science.gov (United States)

    Contaminant concentrations are reported for surface water, sediment, seagrass, mangroves, Florida Crown conch, blue crabs and fish collected during 2010-2011 from the mangrove fringe along eastern Tampa Bay. Concentrations of trace metals, chlorinated pesticides, atrazine, total ...

  11. Surface sediment properties and heavy metal pollution assessment in the near-shore area, north Shandong Peninsula.

    Science.gov (United States)

    Xu, Gang; Pei, Shaofeng; Liu, Jian; Gao, Maosheng; Hu, Gang; Kong, Xianghuai

    2015-06-15

    Samples of surface sediment were collected off the north Shandong Peninsula for grain size and element analyses. Based on the grain size analysis, the surface sediments were dominated by silt and sand, with a small portion of clay, and were probably from the coastal erosion of the Shandong Peninsula. The spatial distribution patterns of the heavy metals were primarily controlled by the sediment types. The geo-accumulation indexes suggest that there was no Cu, Zn and Cr pollution in the study area; Pb and Cd contaminations appeared only at a few stations, while As pollution was distributed widely. The enrichment factors indicated that Cu, Zn and Cr were primarily from terrigenous materials. By contrast, Cd, Pb and As, and especially Cd and As, were probably largely provided by anthropogenic sources. Due to the dilution of coarse-grained matters, there was no contamination at some of the stations at which the influence of human activities was obvious. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. Spatial Distribution of Selected Heavy Metals in Surface Sediments of the EEZ of the East Coast of Peninsular Malaysia

    Directory of Open Access Journals (Sweden)

    Hasrizal Shaari

    2015-01-01

    Full Text Available Spatial distribution of selected metals (Al, Fe, Mn, Zn, Cu, and Co in surface sediments in the EEZ of the east coast of Peninsular Malaysia was investigated. The aim of this paper is to determine the distribution pattern and pollution status of heavy metals in tropical shelf sediments since limited information is available. Heavy metal concentrations ranged between 207.58 and 491.33 µg·g−1 for Mn, 36.13 and 125.93 µg·g−1 for Zn, 14.49 and 22.33 µg·g−1 for Cu, 2.00 and 11.12 µg·g−1 for Co, 6.20 and 8.95% for Fe, and 0.94 and 6.62% for Al. The mean concentrations of heavy metals are in decreasing order as follows: Fe > Al > Mn > Zn > Cu > Co. Most metals registered low concentrations at the nearshore areas. Pearson correlation indicates that most of the metals are derived from the miscellaneous sources. Based on the EFs and Igeo, it is implied that the surface sediment trace metal levels in the study area might be enriched by anthropogenic sources. However, the PLI suggests that this area is not contaminated from the measured heavy metals. This work is important to register the current levels of metals so that any change in concentration can be monitored and managed.

  13. Impacts of lake water environmental condition on bioavailable-phosphorus of surface sediments in Lixia River basin, China

    Directory of Open Access Journals (Sweden)

    Y. Zhang

    2015-05-01

    Full Text Available Bioavailable-phosphorus (BAP fractions of the lake surface sediments (the upper 0−5cm depth and environmental indicators of the related lake water column were investigated in five lakes in Lixia River basin during three seasons in order to evaluate the impacts of environmental indicators of the water column on the BAP fractions of surface sediments. The concentration of BAP varied significantly in different seasons. Factor analysis was used to identify the factors which influence sedimentary BAP significantly in the different seasons. The results showed that AAP and Olsen-P were significantly affected by the chemical oxygen demand through the bacterial activity in summer. The high intensity of bacterial activity and density of algae, and low concentrations of NO3-N and dissolved oxygen under high temperature enhanced the BAP released from anaerobic sediment and significantly contributed to the eutrophication of the lake, especially in summer. In addition, macrophyte roots were beneficial to absorption of AAP and Olsen-P.

  14. Mineralogical, geochemical, and magnetic signatures of surface sediments from the Canadian Beaufort Shelf and Amundsen Gulf (Canadian Arctic)

    Science.gov (United States)

    Gamboa, Adriana; Montero-Serrano, Jean-Carlos; St-Onge, Guillaume; Rochon, André; Desiage, Pierre-Arnaud

    2017-02-01

    Mineralogical, geochemical, magnetic, and siliciclastic grain-size signatures of 34 surface sediment samples from the Mackenzie-Beaufort Sea Slope and Amundsen Gulf were studied in order to better constrain the redox status, detrital particle provenance, and sediment dynamics in the western Canadian Arctic. Redox-sensitive elements (Mn, Fe, V, Cr, Zn) indicate that modern sedimentary deposition within the Mackenzie-Beaufort Sea Slope and Amundsen Gulf took place under oxic bottom-water conditions, with more turbulent mixing conditions and thus a well-oxygenated water column prevailing within the Amundsen Gulf. The analytical data obtained, combined with multivariate statistical (notably, principal component and fuzzy c-means clustering analyses) and spatial analyses, allowed the division of the study area into four provinces with distinct sedimentary compositions: (1) the Mackenzie Trough-Canadian Beaufort Shelf with high phyllosilicate-Fe oxide-magnetite and Al-K-Ti-Fe-Cr-V-Zn-P contents; (2) Southwestern Banks Island, characterized by high dolomite-K-feldspar and Ca-Mg-LOI contents; (3) the Central Amundsen Gulf, a transitional zone typified by intermediate phyllosilicate-magnetite-K-feldspar-dolomite and Al-K-Ti-Fe-Mn-V-Zn-Sr-Ca-Mg-LOI contents; and (4) mud volcanoes on the Canadian Beaufort Shelf distinguished by poorly sorted coarse-silt with high quartz-plagioclase-authigenic carbonate and Si-Zr contents, as well as high magnetic susceptibility. Our results also confirm that the present-day sedimentary dynamics on the Canadian Beaufort Shelf is mainly controlled by sediment supply from the Mackenzie River. Overall, these insights provide a basis for future studies using mineralogical, geochemical, and magnetic signatures of Canadian Arctic sediments in order to reconstruct past variations in sediment inputs and transport pathways related to late Quaternary climate and oceanographic changes.

  15. Heavy metals in the surface sediments of the northern portion of the South China Sea shelf: distribution, contamination, and sources.

    Science.gov (United States)

    Xu, Fangjian; Tian, Xu; Yin, Feng; Zhao, Yongfang; Yin, Xuebo

    2016-05-01

    The concentrations of seven heavy metals (Cr, Ni, Cu, Zn, As, Cd, and Pb) in the surface sediments of the northern portion of the South China Sea (SCS) shelf collected between 2012 and 2014 were measured to assess the potential contamination levels and determine the environmental risks that are associated with heavy metals in the area. The measured concentrations in the sediments were 12.4-72.5 mg kg(-1) for Cr, 4.4-29.2 mg kg(-1) for Ni, 7.1-38.1 mg kg(-1) for Cu, 19.3-92.5 mg kg(-1) for Zn, 1.3-12.1 mg kg(-1) for As, 0.03-0.24 mg kg(-1) for Cd, and 8.5-24.4 mg kg(-1) for Pb. These results indicate that the heavy metal concentrations in the sediments generally meet the China Marine Sediment Quality criteria and suggest that the overall sediment quality of the northern portion of the SCS shelf has not been significantly impacted by heavy metal pollution. However, the enrichment factor (EF) and geoaccumulation index (I geo) clearly show that elevated concentrations of Cd occur in the region. A Pearson's correlation analysis was performed, and the results suggest that Cr, Ni, Cu, and Zn have a natural origin; Cd is primarily sourced from anthropogenic activities, with partial lithogenic components, and As and Pb may be affected by factors such as varying input sources or pathways (i.e., coal burning activities and aerosol precipitation). Heavy metal contamination mostly occurred to the east of Hainan Island, mainly because of the rapid economic and social developments in the Hainan Island. The results of this study will be useful for marine environment managers for the remediation of pollution sources.

  16. Residues, Sources and Potential