WorldWideScience

Sample records for surface pollutant concentrations

  1. Concentrations and geographic distribution of selected organic pollutants in Scottish surface soils

    International Nuclear Information System (INIS)

    Rhind, S.M.; Kyle, C.E.; Kerr, C.; Osprey, M.; Zhang, Z.L.; Duff, E.I.; Lilly, A.; Nolan, A.; Hudson, G.; Towers, W.; Bell, J.; Coull, M.; McKenzie, C.

    2013-01-01

    Concentrations of selected persistent organic pollutants (POPs) representing three chemical classes (polycyclic aromatic hydrocarbons (PAH), polybrominated diphenyl ethers (PBDE) and polychlorinated biphenyls (PCB) and the organic pollutant diethylhexyl phthalate (DEHP), were determined in surface soil samples (0–5 cm) collected at 20 km grid intersects throughout Scotland over a three-year period. Detectable amounts of all chemical classes and most individual congeners were present in all samples. There were no consistent effects of soil or vegetation type, soil carbon content, pH, altitude or distance from centres of population on concentrations which exhibited extreme variation, even in adjacent samples. It is concluded that soil POPs and DEHP concentrations and associated rates of animal and human exposure were highly variable, influenced by multiple, interacting factors, and not clearly related to local sources but possibly related to wet atmospheric deposition and the organic carbon content of the soil. -- Highlights: •Concentrations of selected organic pollutants in Scottish soils were determined. •Concentrations were highly variable. •There were few effects of soil or vegetation type, soil carbon, pH or altitude. •Distance from cities was not an important determinant of concentrations. •Atmospheric deposition and soil organic carbon content may affect concentrations. -- Soil concentrations of anthropogenic persistent organic pollutants are not clearly related to soil type or pH, vegetation, altitude, or distance from pollutant sources

  2. Anthropogenic Pollution in Izmit Bay: Heavy Metal Concentrations in Surface Sediments

    OpenAIRE

    YAŞAR, D.

    2014-01-01

    The extent of marine pollution in İzmit Bay is studied using geochemical data in surface sediments. The concentrations of 41 elements in 24 samples establish that surface sediments in inner and central İzmit Bay display significant enrichments in Ag, As, Cd, Cr, Co, Cu, Hg, Mo, P, Pb, Sb, Ti, V, and Zn associated with high concentrations of total organic carbon and sulphur. Geo-accumulation indices indicate that the inner and central İzmit Bay surface sediments are moderately to very...

  3. Geostatistical integration and uncertainty in pollutant concentration surface under preferential sampling

    Directory of Open Access Journals (Sweden)

    Laura Grisotto

    2016-04-01

    Full Text Available In this paper the focus is on environmental statistics, with the aim of estimating the concentration surface and related uncertainty of an air pollutant. We used air quality data recorded by a network of monitoring stations within a Bayesian framework to overcome difficulties in accounting for prediction uncertainty and to integrate information provided by deterministic models based on emissions meteorology and chemico-physical characteristics of the atmosphere. Several authors have proposed such integration, but all the proposed approaches rely on representativeness and completeness of existing air pollution monitoring networks. We considered the situation in which the spatial process of interest and the sampling locations are not independent. This is known in the literature as the preferential sampling problem, which if ignored in the analysis, can bias geostatistical inferences. We developed a Bayesian geostatistical model to account for preferential sampling with the main interest in statistical integration and uncertainty. We used PM10 data arising from the air quality network of the Environmental Protection Agency of Lombardy Region (Italy and numerical outputs from the deterministic model. We specified an inhomogeneous Poisson process for the sampling locations intensities and a shared spatial random component model for the dependence between the spatial location of monitors and the pollution surface. We found greater predicted standard deviation differences in areas not properly covered by the air quality network. In conclusion, in this context inferences on prediction uncertainty may be misleading when geostatistical modelling does not take into account preferential sampling.

  4. Effects of trans-Eurasian transport of anthropogenic pollutants on surface ozone concentrations over China

    Science.gov (United States)

    Liu, J.; Li, X.; Mauzerall, D. L.; Emmons, L. K.; Horowitz, L. W.; Guo, Y.; Tao, S.

    2015-12-01

    Due to a lack of industrialization in Western China, surface air there was, until recently, believed to be relatively unpolluted. However, recent measurements and modeling studies have found high levels of ozone (O3) there. Based on the state-of-the-science global chemical transport model MOZART-4, we identify the origin, pathway, and mechanism of trans-Eurasian transport of air pollutants to Western China in 2000. MOZART-4 generally simulates well the observed surface O3 over inland areas of China. Simulations find surface ozone concentrations over Western China on average to be about 10 ppbv higher than Eastern China. Using sensitivity studies as well as a fully-tagged approach, we find that anthropogenic emissions from all Eurasian regions except China contribute 10-15 ppbv surface O3 over Western China, superimposed upon a 35-40 ppbv natural background. Transport from European anthropogenic sources to Northwestern China results in 2-6 ppbv O3 enhancements in spring and summer. Indian anthropogenic sources strongly influence O3 over the Tibetan Plateau during the summer monsoon. Transport of O3 originating from emissions in the Middle East occasionally reach Western China and increase surface ozone there by about 1-4 ppbv. These influences are of similar magnitude as trans-Pacific and transatlantic transport of O3 and its precursors, indicating the significance of trans-Eurasian ozone transport in hemispheric transport of air pollution. Our study further indicates that mitigation of anthropogenic emissions from Europe, the Indian subcontinent, and the Middle East could benefit public health and agricultural productivity in Western China.

  5. Pollutant concentrations in placenta

    DEFF Research Database (Denmark)

    Leino, O.; Kiviranta, H.; Karjalainen, A. K.

    2013-01-01

    Unborn children are exposed to environmental pollutants via the placenta, and there is a causal relationship between maternal intake of pollutants and fetal exposure. Placental examination is an effective way for acquiring data for estimating fetal exposure. We analyzed the concentrations of 104...... congeners of persistent organic pollutants, seven organotin compounds, five heavy metals, and methylmercury in 130 randomly selected placentas. Additionally, we examined similarities between pollutant concentrations by analyzing correlations between their placental concentrations. Our results yield new...... information for conducting contaminant risk assessments for the prenatal period. Out of the 117 individual persistent organic pollutants or metals assayed, 46 could be detected in more than half of the placentas. Moreover, dichlorodiphenyldichloroethylene (p,p'-DDE) was found in all placentas. The data...

  6. Simulation of trace metals and PAH atmospheric pollution over Greater Paris: Concentrations and deposition on urban surfaces

    Science.gov (United States)

    Thouron, L.; Seigneur, C.; Kim, Y.; Legorgeu, C.; Roustan, Y.; Bruge, B.

    2017-10-01

    Urban areas can be subject not only to poor air quality, but also to contamination of other environmental media by air pollutants. Here, we address the potential transfer of selected air pollutants (two metals and three PAH) to urban surfaces. To that end, we simulate meteorology and air pollution from Europe to a Paris suburban neighborhood, using a four-level one-way nesting approach. The meteorological and air quality simulations use urban canopy sub-models in order to better represent the effect of the urban morphology on the air flow, atmospheric dispersion, and deposition of air pollutants to urban surfaces. This modeling approach allows us to distinguish air pollutant deposition among various urban surfaces (roofs, roads, and walls). Meteorological model performance is satisfactory, showing improved results compared to earlier simulations, although precipitation amounts are underestimated. Concentration simulation results are also satisfactory for both metals, with a fractional bias air pollutants to other environmental media. Dry deposition fluxes to various urban surfaces are mostly uniform for PAH, which are entirely present in fine particles. However, there is significantly less wall deposition compared to deposition to roofs and roads for trace metals, due to their coarse fraction. Meteorology, particle size distribution, and urban morphology are all important factors affecting air pollutant deposition. Future work should focus on the collection of data suitable to evaluate the performance of atmospheric models for both wet and dry deposition with fine spatial resolution.

  7. Variability of Surface pollutants and aerosol concentration over Abu Dhabi, UAE - sources, transport and current levels

    Science.gov (United States)

    Phanikumar, Devulapalli V.; Basha, Ghouse; Ouarda, Taha B. M. J.

    2015-04-01

    In the view of recent economic, industrial, and rapid development, Abu Dhabi (24.4oN; 54.4oE; 27m msl) has become one of the most populated regions in the world despite of extreme heat, frequent dust storms, and with distinctive topography. The major sources of air pollution are from the dust and sand storms, greenhouse gas emissions, and to some extent from industrial pollution. In order to realize the accurate and comprehensive understanding of air quality and plausible sources over this region, we have made a detailed analysis of three years simultaneous measurements during 2011-13 of pollutants such as O3, SO2, NO2, CO, and PM10 concentrations. Diurnal variation of meteorological parameters such as temperature and wind speed/relative humidity clearly shows daytime maximum/minimum in summer followed by pre-monsoon, post-monsoon and winter. The prevailing winds over this region are mostly from northwesterly direction (Shamal wind). Diurnal wind pattern showed a clear contrast with the majority of the wind pattern during nighttime and early morning is from the westerly/northwesterly and daytime is from southwesterly/southeasterly directions. The diurnal pattern of O3 shows minimum during 08 LT and increases thereafter reaching maximum at 17 LT and decreases during nighttime. However, the diurnal pattern of SO2 and NO2 show a peak at ~ 08 LT and dip at ~ 14 LT during all the seasons with some variability in each season. On the other hand, the diurnal pattern of CO shows a peculiar picture of elevated levels during daytime peaking at ~ 10 LT (prominent in summer and post-monsoon) followed by a sharp decrease and minimum is ~14 LT. PM10 concentration has an early morning peak at ~ 02 LT and then decreases to a minimum value at ~11 LT and again increases in the afternoon hours (maximum at ~17 LT) depicting a forenoon-afternoon asymmetry. Monthly variation of PM10 shows maximum in pre-monsoon season and minimum in winter. Our observations show the diurnal pattern of

  8. Concentration Levels and Ecological Risks of Persistent Organic Pollutants in the Surface Sediments of Tianjin Coastal Area, China

    Directory of Open Access Journals (Sweden)

    Xiaoxia Lu

    2013-01-01

    Full Text Available Sediments were sampled from different surface water bodies in Tianjin coastal area, China, and persistent organic pollutants (POPs including polycyclic aromatic hydrocarbons (PAHs, organochlorine pesticides (OCPs, polychlorinated biphenyls (PCBs, and polybrominated diphenyl ethers (PBDEs were measured using GC/MS or GC/ECD. The purposes were to investigate the concentration levels of the POPs and to assess their ecological risks. The results showed that all the 16 priority PAHs were detected from the 10 sediments sampled with the total concentrations of the 16 PAHs ranging from 274.06 μg/kg to 2656.65 μg/kg, while the concentrations of the halogenated POPs were generally low except in the Dagu waste discharging river where the total concentrations of 24 OCPs, 35 PCBs, and 14 PBDEs were 3103.36 μg/kg, 87.31 μg/kg, and 13.88 μg/kg, respectively. In the studied sediments, PAHs exhibited risks to benthonic organisms; particularly the concentrations of naphthalene and/or acenaphthene exceeded their probable effect concentrations in several locations. In comparison, only in the Dagu waste discharging river, OCPs exhibited risks with the concentrations of heptachlor epoxide and lindane exceeding their probable effect concentrations. PCBs and PBDEs posed rare risks in the studied area.

  9. Pollution concentration estimates in ecologically important zones

    Energy Technology Data Exchange (ETDEWEB)

    Skiba, Y.N. [Mexico City Univ. (Mexico). Center for Atmospheric Sciences

    1995-12-31

    Method based on using the pollutant transport equation and the adjoint technique is described here for estimating the pollutant concentration level in ecologically important zones. The method directly relates the pollution level in such zones with the power of the pollution sources and the initial pollution field. Assuming that the wind or current velocities are known (from climatic data or dynamic model), the main and adjoint pollutant transport equations can be considered in a limited area to solve such theoretically and practically important problems as: (1) optimal location of new industries in a given region with the aim to minimize the pollution concentration in certain ecologically important zones, (2) optimization of emissions from operating industries, (3) detection of the plants violating sanitary regulations, (4) analysis of the emissions coming from the vehicle traffic (such emissions can be included in the model by means of the linear pollution sources located along the main roadways), (5) estimation of the oil pollution in various ecologically important oceanic (sea) zones in case of accident with the oil tanker, (6) evaluation of the sea water desalination level in estuary regions, and others. These equations considered in a spherical shell domain can also be applied to the problems of transporting the pollutants from a huge industrial complex, or from the zone of an ecological catastrophe similar to the Chernobyl one

  10. Groundwater and surface water pollution

    Energy Technology Data Exchange (ETDEWEB)

    Chae, Y.S.; Hamidi, A. [eds.

    2000-07-01

    This book contains almost all the technical know-how that is required to clean up the water supply. It provides a survey of up-to-date technologies for remediation, as well as a step-by-step guide to pollution assessment for both ground and surface waters. In addition to focusing on causes, effects, and remedies, the book stresses reuse, recycling, and recovery of resources. The authors suggest that through total recycling wastes can become resources.

  11. Effect of pesticides on surface ozone concentration

    International Nuclear Information System (INIS)

    Farag, S.A.; Rizk, H.F.S.; Elbahnasawy, R.M.; Meleigy, M.I.

    1992-01-01

    A comparative study through seasonal variation of surface ozone concentration was carried out recently (1991-1992) at a background area free from expected urban pollutants (Shebin ElKom) and industrial and urban areas (Cairo). Surface ozone concentrations in ppb were generally lower in such area compared with urban or industrial areas studied through the comparative seasonal variations. Notable smog values (>100 ppb) of hourly surface ozone concentrations appeared during summer season in this rural area; during this season, some pesticides were sprayed over cotton and other crops fields in near by agricultural areas. The unexpected jump in the values of diurnal concentrations of surface ozone in that area may be due to the photochemical reactions of these organic pesticides in the atmosphere. 1 fig, 3 tab

  12. Pollutant concentrations and pollution loads in stormwater runoff from different land uses in Chongqing.

    Science.gov (United States)

    Wang, Shumin; He, Qiang; Ai, Hainan; Wang, Zhentao; Zhang, Qianqian

    2013-03-01

    To investigate the distribution of pollutant concentrations and pollution loads in stormwater runoff in Chongqing, six typical land use types were selected and studied from August 2009 to September 2011. Statistical analysis on the distribution of pollutant concentrations in all water samples shows that pollutant concentrations fluctuate greatly in rainfall-runoff, and the concentrations of the same pollutant also vary greatly in different rainfall events. In addition, it indicates that the event mean concentrations (EMCs) of total suspended solids (TSS) and chemical oxygen demand (COD) from urban traffic roads (UTR) are significantly higher than those from residential roads (RR), commercial areas (CA), concrete roofs (CR), tile roofs (TRoof), and campus catchment areas (CCA); and the EMCs of total phosphorus (TP) and NH3-N from UTR and CA are 2.35-5 and 3 times of the class-II standard values specified in the Environmental Quality Standards for Surface Water (GB 3838-2002). The EMCs of Fe, Pb and Cd are also much higher than the class-III standard values. The analysis of pollution load producing coefficients (PLPC) reveals that the main pollution source of TSS, COD and TP is UTR. The analysis of correlations between rainfall factors and EMCs/PLPC indicates that rainfall duration is correlated with EMCs/PLPC of TSS for TRoof and TP for UTR, while rainfall intensity is correlated with EMCs/PLPC of TP for both CR and CCA. The results of this study provide a reference for better management of non-point source pollution in urban regions.

  13. Total pollution effect of urban surface runoff.

    Science.gov (United States)

    Luo, Hongbing; Luo, Lin; Huang, Gu; Liu, Ping; Li, Jingxian; Hu, Sheng; Wang, Fuxiang; Xu, Rui; Huang, Xiaoxue

    2009-01-01

    For pollution research with regard to urban surface runoff, most sampling strategies to date have focused on differences in land usage. With single land-use sampling, total surface runoff pollution effect cannot be evaluated unless every land usage spot is monitored. Through a new sampling strategy known as mixed stormwater sampling for a street community at discharge outlet adjacent to river, this study assessed the total urban surface runoff pollution effect caused by a variety of land uses and the pollutants washed off from the rain pipe system in the Futian River watershed in Shenzhen City of China. The water quality monitoring indices were COD (chemical oxygen demand), TSS (total suspend solid), TP (total phosphorus), TN (total nitrogen) and BOD (biochemical oxygen demand). The sums of total pollution loads discharged into the river for the four indices of COD, TSS, TN, and TP over all seven rainfall events were very different. The mathematical model for simulating total pollution loads was established from discharge outlet mixed stormwater sampling of total pollution loads on the basis of four parameters: rainfall intensity, total land area, impervious land area, and pervious land area. In order to treat surface runoff pollution, the values of MFF30 (mass first flush ratio) and FF30 (first 30% of runoff volume) can be considered as split-flow control criteria to obtain more effective and economical design of structural BMPs (best management practices) facilities.

  14. Particulate pollutants in surface waters

    Energy Technology Data Exchange (ETDEWEB)

    Westrich, B. [Stuttgart Univ. (Germany). Hydraulik Lab.

    2001-07-01

    In Germany the input of pollutants from the industry and private houses has been significantly reduced since the mid-70s and after the unification in 1990 and hence, young sediments are less polluted than older ones. However, some hydrological risk of erosion and subsequent remobilisation of contaminants from deeper sediment layers still exists. Many heavy metals such as Cd, Cr, Pb are chemically fixed so there is almost no risk of remobilisation unless hydrodynamic erosion followed by chemical reaction takes place. Therefore, hydrodynamic erodibility of deposited sediments is a key issue for particulate contaminant mobility assessment in fluvial systems. We have not yet a clear view of toxic effects of sediment-bound contaminants caused by sediment erosion, repartitioning of particulate and dissolved pollutants after resuspension, biochemical transfer and degradation in a fluvial environment. (orig.)

  15. Metal pollution determined by pollution indices for sea grass P. oceanica and surface sediments

    Directory of Open Access Journals (Sweden)

    Stanković Slavka

    2015-01-01

    Full Text Available Concentrations of Fe, Mn, Cu, Zn, Pb, Ni, Co, As, Co, and Hg in the sea grass Posidonia oceanica and surface sediment samples were determined. Together with P. oceanica, surface sediment samples were collected at eight locations in the major demographic, tourist and port areas along the Montenegrin coast to assess metal pollution. The metal pollution index (MPI and metal enrichment factor (EF were calculated and used to evaluate the impact of heavy metals in the surface sediment on P. oceanica. The sediment MPI and EF values were lower than these values in P. oceanica at the same locations. Since the surface sediment contained lower mean concentrations of Zn, Ni, Pb, Cd and Hg, than the sea grass P. oceanic, we concluded that the sea grass absorbed some metals from the seawater column. [Projekat Ministarstva nauke Republike Srbije, br. III 43009

  16. Model predictions of ambient pollution concentration | Olaniyan ...

    African Journals Online (AJOL)

    The results show that the emission loads of the pollutants associated with the use of industrial boiler and power generating plant are in decreasing order of magnitude as NOx > CO > TSP > SO2 > VOC > SO,sub>3 and NOx > TSP > CO > HC > SO2 respectively. The emission load of SO2 is 74.6% in power generating plant, ...

  17. Heavy metal concentrations in forest litter - indicators of pollutant depositions

    International Nuclear Information System (INIS)

    Angehrn-Bettinazzi, C.; Hertz, J.

    1990-01-01

    By means of a comparison of the heavy metal concentrations in organic litter from different sites it was examined to what extent the heavy metal concentrations correlate with the atmospheric pollution situation. It follows from the variance analyses: The atmospheric pollution situation is the dominating factor for the heavy metal concentration in L litter. The elements Cd and Zn show a pH-sensitivity at the same time. The lead concentration in the L n and L v horizons reflects the atmospheric pollution situation of the corresponding site. Specific pollution patterns, e.g. in the case of hillside sites, are neither detected through the gravitational deposition (open land) nor through the airborne dust concentration; these can be recognized by the monitor 'litter'. Only horizons in the intercrown area with identical tree vegetation, which are characterized in detail, must be used for monitoring. (orig.) [de

  18. Controls on hourly variations in urban background air pollutant concentrations

    Science.gov (United States)

    Moreno, Teresa; Lavín, Javier; Querol, Xavier; Alastuey, Andrés; Viana, Mar; Gibbons, Wes

    Average 21st century concentrations of urban air pollutants linked to cardiorespiratory disease are not declining, and commonly exceed legal limits. Even below such limits, health effects are being observed and may be related to transient daytime peaks in pollutant concentrations. With this in mind, we analyse >52,000 hourly urban background readings of PM 10 and pollutant gases throughout 2007 at a European town with legal annual average concentrations of common pollutants, but with a documented air pollution-related cardiorespiratory health problem, and demonstrate the hourly variations in PM 10, SO 2, NO x, CO and O 3. Back-trajectory analysis was applied to track the arrival of exotic PM 10 intrusions, the main controls on air pollutants were identified, and the typical hourly pattern on ambient concentrations during 2007 was profiled. Emphasis was placed on "worst case" data (>90th percentile), when health effects are likely to be greatest. The data show marked daytime variations in pollutants result from rush-hour traffic-related pollution spikes, midday industrial SO 2 maxima, and afternoon O 3 peaks. African dust intrusions enhance PM 10 levels at whatever hour, whereas European PM incursions produce pronounced evening peaks due to their transport direction (across an industrial traffic corridor). Transient peak profiling moves us closer to the reality of personal outdoor exposure to inhalable pollutants in a given urban area. We argue that such an approach to monitoring data potentially offers more to air pollution health effect studies than using only 24 h or annual averages.

  19. Studies of atmospheric pollutants concentration factors from La Reina reactor

    International Nuclear Information System (INIS)

    Vera, I.; Alegria, E.

    1983-01-01

    Results of an atmospheric diffusion model for pollutant gases re shown, in which the nuclear reactor of the La Reina Nuclear Centre is considered as the emitting source. The model uses a gaussian shape steady state cloud of concentration of pollutants and actual topographical and meteorological statistics data os the zone. Expected and maximum probable concentration factors are computed in a polar lattice in 16 wind directions. It was found that peaks for expected concentration factors and maximum probable concentration factors at ground level fall within the N and ESE directions at distances where hills or mountains reach the emitted cloud. A discussion of the practical value of these calculations is given. (Author)

  20. Study on Late Rainy Season Aerial Pollutant Gases Concentrations ...

    African Journals Online (AJOL)

    Research on the concentrations of pollutant gasses in tropical livestock buildings is needed in order to establish baselines for exposure limits in the context of animal and human welfare in tropical environments. Concentrations of aerial ammonia (NH3), nitrous oxide (NO2), flammable gas (methane, CH4), carbon monoxide ...

  1. Development of Indoor Air Pollution Concentration Prediction by Geospatial Analysis

    Directory of Open Access Journals (Sweden)

    Adyati Pradini Yudison

    2015-07-01

    Full Text Available People living near busy roads are potentially exposed to traffic-induced air pollutants. The pollutants may intrude into the indoor environment, causing health risks to the occupants. Prediction of pollutant exposure therefore is of great importance for impact assessment and policy making related to environmentally sustainable transport. This study involved the selection of spatial interpolation methods that can be used for prediction of indoor air quality based on outdoor pollutant mapping without indoor measurement data. The research was undertaken in the densely populated area of Karees, Bandung, Indonesia. The air pollutant NO2 was monitored in this area as a preliminary study. Nitrogen dioxide concentrations were measured by passive diffusion tube. Outdoor NO2 concentrations were measured at 94 locations, consisting of 30 roadside and 64 outdoor locations. Residential indoor NO2 concentrations were measured at 64 locations. To obtain a spatially continuous air quality map, the spatial interpolation methods of inverse distance weighting (IDW and Kriging were applied. Selection of interpolation method was done based on the smallest root mean square error (RMSE and standard deviation (SD. The most appropriate interpolation method for outdoor NO2 concentration mapping was Kriging with an SD value of 5.45 µg/m3 and an RMSE value of 5.45 µg/m3, while for indoor NO2 concentration mapping the IDW was best fitted with an RMSE value of 5.92 µg/m3 and an SD value of 5.92 µg/m3.

  2. Retrieve Aerosol Concentration Based On Surface Model and Distribution of Concentration of PM2.5

    Science.gov (United States)

    Cui, Hongzhi

    2017-04-01

    As China's economy continues to grow, urbanization continues to advance, along with growth in all areas to pollutant emissions in the air industry, air quality also continued to deteriorate. Aerosol concentrations as a measure of air quality of the most important part of are more and more people's attention. Traditional monitoring stations measuring aerosol concentration method is accurate, but time-consuming and can't be done simultaneously measure a large area, can only rely on data from several monitoring sites to predict the concentration of the panorama. Remote Sensing Technology retrieves aerosol concentrations being by virtue of their efficient, fast advantages gradually into sight. In this paper, by the method of surface model to start with the physical processes of atmospheric transport, innovative aerosol concentration coefficient proposed to replace the traditional aerosol concentrations, pushed to a set of retrieval of aerosol concentration coefficient method, enabling fast and efficient Get accurate air pollution target area. At the same paper also monitoring data for PM2.5 in Beijing were analyzed from different angles, from the perspective of the data summarized in Beijing PM2.5 concentration of time, space, geographical distribution and concentration of PM2.5 and explored the relationship between aerosol concentration coefficient and concentration of PM2.5. Key words,Air Pollution, Aerosol concentration , PM2.5 , Retrieve

  3. Changing of Cations Concentrations in Waters of Polluted Urban River

    Directory of Open Access Journals (Sweden)

    Andrianova Maria

    2016-01-01

    Full Text Available Water from urban river Okhta polluted with domestic and industrial wastewaters was investigated. Specific electric conductivity (k, molar concentrations of ions Na+, K+, Mg++ and Ca++, concentration of total nitrogen (TN were measured in water samples. Increasing of k happened together with increasing of molar fraction of sodium-ion (RNa among all studied cations (and correspondingly decreasing of molar fractions of other cations. Good correlations were found between RNa and TN (r = 0.67, k and TN (r = 0.84. The results support the idea of the leading role of wastewaters in changing of k and cations concentrations. Electric conductivity and RNa could be used to distinguish between polluted and not polluted waters in the Okhta.

  4. The impact of land use on microbial surface water pollution.

    Science.gov (United States)

    Schreiber, Christiane; Rechenburg, Andrea; Rind, Esther; Kistemann, Thomas

    2015-03-01

    Our knowledge relating to water contamination from point and diffuse sources has increased in recent years and there have been many studies undertaken focusing on effluent from sewage plants or combined sewer overflows. However, there is still only a limited amount of microbial data on non-point sources leading to diffuse pollution of surface waters. In this study, the concentrations of several indicator micro-organisms and pathogens in the upper reaches of a river system were examined over a period of 16 months. In addition to bacteria, diffuse pollution caused by Giardia lamblia and Cryptosporidium spp. was analysed. A single land use type predestined to cause high concentrations of all microbial parameters could not be identified. The influence of different land use types varies between microbial species. The microbial concentration in river water cannot be explained by stable non-point effluent concentrations from different land use types. There is variation in the ranking of the potential of different land use types resulting in surface water contamination with regard to minimum, median and maximum effects. These differences between median and maximum impact indicate that small-scale events like spreading manure substantially influence the general contamination potential of a land use type and may cause increasing micro-organism concentrations in the river water by mobilisation during the next rainfall event. Copyright © 2014 Elsevier GmbH. All rights reserved.

  5. Air pollutant concentrations near three Texas roadways, part II: Chemical characterization and transformation of pollutants

    Science.gov (United States)

    Clements, Andrea L.; Jia, Yuling; Denbleyker, Allison; McDonald-Buller, Elena; Fraser, Matthew P.; Allen, David T.; Collins, Donald R.; Michel, Edward; Pudota, Jayanth; Sullivan, David; Zhu, Yifang

    Spatial gradients of vehicular emitted air pollutants were measured in the vicinity of three roadways in the Austin, Texas area: (1) State Highway 71 (SH-71), a heavily traveled arterial highway dominated by passenger vehicles; (2) Interstate 35 (I-35), a limited access highway north of Austin in Georgetown; and (3) Farm to Market Road 973 (FM-973), a heavily traveled surface roadway with significant truck traffic. A mobile monitoring platform was used to characterize the gradients of CO and NO x concentrations with increased distance from each roadway, while concentrations of carbonyls in the gas-phase and fine particulate matter mass and composition were measured at stationary sites upwind and at one (I-35 and FM-973) or two (SH-71) downwind sites. Regardless of roadway type or wind direction, concentrations of carbon monoxide (CO), nitric oxide (NO), and oxides of nitrogen (NO x) returned to background levels within a few hundred meters of the roadway. Under perpendicular wind conditions, CO, NO and NO x concentrations decreased exponentially with increasing distance perpendicular to the roadways. The decay rate for NO was more than a factor of two greater than for CO, and it comprised a larger fraction of NO x closer to the roadways than further downwind suggesting the potential significance of near roadway chemical processing as well as atmospheric dilution. Concentrations of most carbonyl species decreased with distance downwind of SH-71. However, concentrations of acetaldehyde and acrolein increased farther downwind of SH-71, suggesting chemical generation from the oxidation of primary vehicular emissions. The behavior of particle-bound organic species was complex and further investigation of the size-segregated chemical composition of particulate matter (PM) at increasing downwind distances from roadways is warranted. Fine particulate matter (PM 2.5) mass concentrations, polycyclic aromatic hydrocarbons (PAHs), hopanes, and elemental carbon (EC

  6. Pollutant Concentrations in the Rime and Fog Water

    Czech Academy of Sciences Publication Activity Database

    Fišák, Jaroslav; Tesař, Miroslav; Fottová, D.

    2008-01-01

    Roč. 3, č. 1 (2008), S68-S73 ISSN 1801-5395 R&D Projects: GA AV ČR IAA3042301; GA AV ČR 1QS200420562 Institutional research plan: CEZ:AV0Z30420517; CEZ:AV0Z20600510 Keywords : fog water * rime water * pollutant concentration Subject RIV: DG - Athmosphere Sciences, Meteorology

  7. heavy metals pollution on surface water sources in kaduna

    African Journals Online (AJOL)

    ABSTRACT. This study examine the effects of heavy metal pollutants to aquatic ecosystems and the environment by considering the role of urban, municipal, agricultural, industrial and other anthropogenic processes as sources of heavy metal pollution in surface water sources of Kaduna metropolis. Samples of the polluted ...

  8. Heavy Metals Pollution on Surface Water Sources in Kaduna ...

    African Journals Online (AJOL)

    This study examine the effects of heavy metal pollutants to aquatic ecosystems and the environment by considering the role of urban, municipal, agricultural, industrial and other anthropogenic processes as sources of heavy metal pollution in surface water sources of Kaduna metropolis. Samples of the polluted water were ...

  9. Lead concentrations and risk exposure assessment in surface soils ...

    African Journals Online (AJOL)

    This study investigated lead concentrations in < 250 μm and < 75 μm of deposited dust and< 2000 μm, < 250 μm, and < 75 μm of surface soils at undeveloped residential lands leased to auto-mechanic artisans for a minimum of ten years and estimated exposure risk for children that will reside on the polluted lands after the ...

  10. Air Pollution in China: Mapping of Concentrations and Sources.

    Science.gov (United States)

    Rohde, Robert A; Muller, Richard A

    2015-01-01

    China has recently made available hourly air pollution data from over 1500 sites, including airborne particulate matter (PM), SO2, NO2, and O3. We apply Kriging interpolation to four months of data to derive pollution maps for eastern China. Consistent with prior findings, the greatest pollution occurs in the east, but significant levels are widespread across northern and central China and are not limited to major cities or geologic basins. Sources of pollution are widespread, but are particularly intense in a northeast corridor that extends from near Shanghai to north of Beijing. During our analysis period, 92% of the population of China experienced >120 hours of unhealthy air (US EPA standard), and 38% experienced average concentrations that were unhealthy. China's population-weighted average exposure to PM2.5 was 52 μg/m3. The observed air pollution is calculated to contribute to 1.6 million deaths/year in China [0.7-2.2 million deaths/year at 95% confidence], roughly 17% of all deaths in China.

  11. Persistent organic pollutant concentrations in first birth mothers across Mexico.

    Science.gov (United States)

    Rodríguez-Dozal, Sandra; Riojas Rodríguez, Horacio; Hernández-Ávila, Mauricio; Van Oostdam, Jay; Weber, Jean Philippe; Needham, Larry L; Trip, Luke

    2012-01-01

    This project was initiated by the North America Commission for Environmental Cooperation (CEC). Its main purpose was to obtain an initial profile on pregnant woman's exposure to persistent organic pollutants (POPs) in North America (Canada, the United States and Mexico). Persistent organic pollutants are transferred to the fetus via the placenta during the pregnancy or to the infant via maternal milk; therefore, the pregnant woman's body burden is important because of the higher exposures and potential health effects in the fetus and infant. This paper presents the results from 240 pregnant women in 10 Mexican cities, and includes the concentrations of various POPs such as polychlorinated biphenyls (PCBs), organochlorine pesticides and polychlorinated dibenzo dioxins and furans (PCDDs and PCDFs) in maternal plasma. We found concentrations of p,p'-DDE in maternal samples from Coatzacoalcos to be ∼60% higher than those found in Ciudad Obregon, which had the second highest concentration. Pregnant women from Merida had higher mean concentrations of PCBs than all women in other regions. Results for PCDDs and PCDFs plus dioxin-like PCBs data were only available on the basis of composite samples, and their concentrations are similar in most cities except for Coatzacoalcos, which had more than double the concentration found in other cities. Although this study provides useful information on the variability of POPs in specific populations and possible regional/local differences, these results cannot be generalized to the entire Mexican population because of differences in age, gender, sources of exposure and nonrandom nature of the sample.

  12. Total vs. internal element concentrations in Scots pine needles along a sulphur and metal pollution gradient

    International Nuclear Information System (INIS)

    Rautio, Pasi; Huttunen, Satu

    2003-01-01

    Different methods should be used for foliar analyses of trees used as bioindicators of pollution, than those analyses used in nutritional studies of trees. - Analysis of foliar elements is a commonly used method for studying tree nutrition and for monitoring the impacts of air pollutants on forest ecosystems. Interpretations based on the results of foliar element analysis may, however, be different in nutrition vs. monitoring studies. We studied the impacts of severe sulphur and metal (mainly Cu and Ni) pollution on the element concentrations (Al, Ca, Cu, Fe, K, Mg, Mn, Ni, P, Pb, S and Zn) in Scots pine (Pinus sylvestris L.) foliage along an airborne sulphur and metal pollution gradient. Emphasis was put on determining the contribution of air-borne particles that have accumulated on needle surfaces to the total foliage concentrations. A comparison of two soil extraction methods was carried out in order to obtain a reliable estimate of plant-available element concentrations in the soil. Element concentrations in the soil showed only a weak relationship with internal foliar concentrations. There were no clear differences between the total and internal needle S concentrations along the gradient, whereas at the plot closest to the metal smelter complex the total Cu concentrations in the youngest needles were 1.3-fold and Ni concentrations over 1.6-fold higher than the internal needle concentrations. Chloroform-extracted surface wax was found to have Ni and Cu concentrations of as high as 3000 and 600 μg/g of wax, respectively. Our results suggest that bioindicator studies (e.g. monitoring studies) may require different foliar analysis techniques from those used in studies on the nutritional status of trees

  13. The protection of urban areas from surface wastewater pollutions

    Directory of Open Access Journals (Sweden)

    Vialkova Elena

    2017-01-01

    Full Text Available In this paper it considered the problem of collection, treatment and discharge into waters of rain and melted wastewater. To reduce the load on the combined sewer system, there are engineering solutions collect rain and melt water for use in the irrigation of lawns and green spaces. Research carried out at the department “Water supply and sanitation”, (Russia, confirm the high pollution concentrations of meltwater and rainfall in urban arias. Series of measurements of heavy metal in rainwater runoff carried out in Hungary demonstrates clearly the differences in concentrations in the function of distance from the edge of the road. Also differences are introduced between pollution concentrations in runoff water from within and outside urban traffic roads. The quality of snow cover, forming meltwater is observed to be changing in dependence on roadway location. Quality characteristics of surface runoff and its sediments can be effectively improved with super-high frequency radiation (SHF treatment which is presented in this paper.

  14. The impacts of surface ozone pollution on winter wheat productivity in China--An econometric approach.

    Science.gov (United States)

    Yi, Fujin; Jiang, Fei; Zhong, Funing; Zhou, Xun; Ding, Aijun

    2016-01-01

    The impact of surface ozone pollution on winter wheat yield is empirically estimated by considering socio-economic and weather determinants. This research is the first to use an economic framework to estimate the ozone impact, and a unique county-level panel is employed to examine the impact of the increasing surface ozone concentration on the productivity of winter wheat in China. In general, the increment of surface ozone concentration during the ozone-sensitive period of winter wheat is determined to be harmful to its yield, and a conservative reduction of ozone pollution could significantly increase China's wheat supply. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. Urban surface water pollution problems arising from misconnections.

    Science.gov (United States)

    Revitt, D Michael; Ellis, J Bryan

    2016-05-01

    The impacts of misconnections on the organic and nutrient loadings to surface waters are assessed using specific household appliance data for two urban sub-catchments located in the London metropolitan region and the city of Swansea. Potential loadings of biochemical oxygen demand (BOD), soluble reactive phosphorus (PO4-P) and ammoniacal nitrogen (NH4-N) due to misconnections are calculated for three different scenarios based on the measured daily flows from specific appliances and either measured daily pollutant concentrations or average pollutant concentrations for relevant greywater and black water sources obtained from an extensive review of the literature. Downstream receiving water concentrations, together with the associated uncertainties, are predicted from derived misconnection discharge concentrations and compared to existing freshwater standards for comparable river types. Consideration of dilution ratios indicates that these would need to be of the order of 50-100:1 to maintain high water quality with respect to BOD and NH4-N following typical misconnection discharges but only poor quality for PO4-P is likely to be achievable. The main pollutant loading contributions to misconnections arise from toilets (NH4-N and BOD), kitchen sinks (BOD and PO4-P) washing machines (PO4-P and BOD) and, to a lesser extent, dishwashers (PO4-P). By completely eliminating toilet misconnections and ensuring misconnections from all other appliances do not exceed 2%, the potential pollution problems due to BOD and NH4-N discharges would be alleviated but this would not be the case for PO4-P. In the event of a treatment option being preferred to solve the misconnection problem, it is shown that for an area the size of metropolitan Greater London, a sewage treatment plant with a Population Equivalent value approaching 900,000 would be required to efficiently remove BOD and NH4-N to safely dischargeable levels but such a plant is unlikely to have the capacity to deal

  16. Macro-invertebrate decline in surface water polluted with imidacloprid.

    Science.gov (United States)

    Van Dijk, Tessa C; Van Staalduinen, Marja A; Van der Sluijs, Jeroen P

    2013-01-01

    Imidacloprid is one of the most widely used insecticides in the world. Its concentration in surface water exceeds the water quality norms in many parts of the Netherlands. Several studies have demonstrated harmful effects of this neonicotinoid to a wide range of non-target species. Therefore we expected that surface water pollution with imidacloprid would negatively impact aquatic ecosystems. Availability of extensive monitoring data on the abundance of aquatic macro-invertebrate species, and on imidacloprid concentrations in surface water in the Netherlands enabled us to test this hypothesis. Our regression analysis showed a significant negative relationship (Pwater quality norms for imidacloprid in the Netherlands are protective in real conditions. Our data show that macrofauna abundance drops sharply between 13 and 67 ng l(-1). For aquatic ecosystem protection, two of the norms are not protective at all while the strictest norm of 13 ng l(-1) (MTR) seems somewhat protective. In addition to the existing experimental evidence on the negative effects of imidacloprid on invertebrate life, our study, based on data from large-scale field monitoring during multiple years, shows that serious concern about the far-reaching consequences of the abundant use of imidacloprid for aquatic ecosystems is justified.

  17. Arsenic pollution of agricultural soils by concentrated animal feeding operations (CAFOs).

    Science.gov (United States)

    Liu, Xueping; Zhang, Wenfeng; Hu, Yuanan; Hu, Erdan; Xie, Xiande; Wang, Lingling; Cheng, Hefa

    2015-01-01

    Animal wastes from concentrated animal feeding operations (CAFOs) can cause soil arsenic pollution due to the widespread use of organoarsenic feed additives. This study investigated the arsenic pollution of surface soils in a typical CAFO zone, in comparison with that of agricultural soils in the Pearl River Delta, China. The mean soil arsenic contents in the CAFO zone were elevated compared to those in the local background and agricultural soils of the Pearl River Delta region. Chemical speciation analysis showed that the soils in the CAFO zone were clearly contaminated by the organoarsenic feed additive, p-arsanilic acid (ASA). Transformation of ASA to inorganic arsenic (arsenite and arsenate) in the surface soils was also observed. Although the potential ecological risk posed by the arsenic in the surface soils was relatively low in the CAFO zone, continuous discharge of organoarsenic feed additives could cause accumulation of arsenic and thus deserves significant attention. Copyright © 2014 Elsevier Ltd. All rights reserved.

  18. Surface Water Quality Assessment and Prioritize the Factors Pollute This Water Using Topsis Fuzzy Hierarchical Analysis

    Directory of Open Access Journals (Sweden)

    Mehdi Komasi

    2017-03-01

    Full Text Available Background & Objective: Nowadays, according to growth of industry and increasing population, water resources are seriousely shortened. This lack of water resources will require special management to be considered in industry and agriculture. Among the various sources of water, surface waters are more susceptible to infection. The most important of these sources of pollution are industrial pollution, detergent, pesticides, radioactive materials, heat and salt concentration.  Materials & methods: In this article, at first the importance of each pollutant will be evaluated base on the effects and its results and then quality evaluation of surface water will be studied. In order to assess the relative importance of these pollutants primarily using TOPSIS software, prioritize these factors as one of the hierarchical analysis and then is modeled with decision tree method using Weka software, the importance of each factor is evaluated and if it does not meet the minimal importance of the decision tree will be removed. Results: The results obtained from the Topsis fuzzy analysis indicate that surface water and groundwater are exposed to pollution about 74% and 26% respectively among the six pollutants examined in this study. In addition, results obtaned from the hierarchical tree in software Weka has shown that the heat factor, soluble salts and industrial pollutants give impac factor or purity about 0.1338, 0.0523 and 1.2694 respectively. Conclusion: Surface water is at greater risk of being polluted compared with groundwater. The heat factor and low concentration of dissolved salts have the low impact and industrial pollutants are considered as the most influential factors in surface water pollution.

  19. Estimating Pollutant Concentration Maps at Multiple Spatial and Temporal Scales for Exposure Studies

    Science.gov (United States)

    Tan, Si

    Chronic exposure to high concentrations of pollutants such as NO2 and ultrafine particles is associated with negative health effects. Studies of exposure to these pollutants require estimates of concentrations at temporal and spatial scales relevant to exposure calculations. We have developed and applied methods to construct these concentration "maps" by using a combination of measurements and modeled results. To estimate concentration patterns at the urban scale of tens of kilometers we have formulated a Lagrangian model to estimate concentrations of NOx, NO2, and O3 over a domain extending over hundreds of kilometers. The model is evaluated with data collected at 21 regional monitoring stations in the San Joaquin Valley Air Basin during 2005. The model provides adequate descriptions of the spatial and temporal variation of concentrations of NO2, and NOx. We then use "residual" Kriging to combine the results from the dispersion model with observed concentrations to produce realistic concentration maps. To estimate concentration patterns at scales of tens of meters in urban areas we developed a dispersion model that accounts for the effects of local building morphology on dispersion. The data used to evaluate the model was collected in field studies conducted in Los Angeles, California. The studies measured ultrafine particle concentrations and associated micrometeorology at several locations with different building morphologies. Surface concentrations in urban areas are primarily controlled by vertical dispersion, which depends on the street aspect ratio, defined as the ratio of the equivalent building height to the street width, and the vertical turbulent velocity sigma w. The presence of buildings increases the concentrations due to local traffic emissions relative to open areas. Since routine measurements of micrometeorological variables are usually not available in urban areas, we have developed models that allow us to estimate urban surface variables using

  20. The net decay time of anomalies in concentrations of atmospheric pollutants

    Science.gov (United States)

    Vinnikov, Konstantin Y.; Dickerson, Russell R.; Krotkov, Nickolay A.; Edgerton, Eric S.; Schwab, James J.

    2017-07-01

    This paper introduces a new parameter to characterize the random component in temporal variability of atmospheric pollutants and proposes a simple statistical technique for its evaluation. That parameter is the net decay time (or the time scale) of the local anomalies in concentrations of atmospheric pollutants, rather than the traditionally used chemical lifetimes of total amounts of the species. Using widely available data of hourly multi-year surface trace gas pollutant concentrations we demonstrate a simplified way to estimate the net decay time with an exponential approximation of lag-correlation functions. We assessed the decay times of fluctuations in observations of eight atmospheric pollutants (SO2, NO, NO2, NOy, O3, CO, NH3, and HNO3) at two urban sites and one cleaner rural site in the Eastern US. The time scales of temporal fluctuations (net decay times) vary from about one hour to slightly more than one day. These scales are generally much shorter in urban environments than in remote regions. We also compared day- and night-time observations in warm and cold seasons. At night in the cold season, time scales of fluctuations in atmospheric pollutants are usually the longest. Such estimates should be useful to air quality prediction, public health, and satellite remote sensing research communities.

  1. Methods for Online Monitoring of Air Pollution Concentration

    OpenAIRE

    Ionel, Ioana; Popescu, Francisc

    2010-01-01

    Air pollution is a global environmental problem that represents a measure of the potential of the climate change rate influenced by local pollution sources, although its scale has a strong regional or local orientation. Improvements in technology supported by policy measures have lead to reduced pollution levels, but still, especially in new member states, more activity is needed. In developed countries advanced low pollution technique is applied in order to reduce the pollution levels Howeve...

  2. Macro-invertebrate decline in surface water polluted with imidacloprid.

    Directory of Open Access Journals (Sweden)

    Tessa C Van Dijk

    Full Text Available Imidacloprid is one of the most widely used insecticides in the world. Its concentration in surface water exceeds the water quality norms in many parts of the Netherlands. Several studies have demonstrated harmful effects of this neonicotinoid to a wide range of non-target species. Therefore we expected that surface water pollution with imidacloprid would negatively impact aquatic ecosystems. Availability of extensive monitoring data on the abundance of aquatic macro-invertebrate species, and on imidacloprid concentrations in surface water in the Netherlands enabled us to test this hypothesis. Our regression analysis showed a significant negative relationship (P<0.001 between macro-invertebrate abundance and imidacloprid concentration for all species pooled. A significant negative relationship was also found for the orders Amphipoda, Basommatophora, Diptera, Ephemeroptera and Isopoda, and for several species separately. The order Odonata had a negative relationship very close to the significance threshold of 0.05 (P = 0.051. However, in accordance with previous research, a positive relationship was found for the order Actinedida. We used the monitoring field data to test whether the existing three water quality norms for imidacloprid in the Netherlands are protective in real conditions. Our data show that macrofauna abundance drops sharply between 13 and 67 ng l(-1. For aquatic ecosystem protection, two of the norms are not protective at all while the strictest norm of 13 ng l(-1 (MTR seems somewhat protective. In addition to the existing experimental evidence on the negative effects of imidacloprid on invertebrate life, our study, based on data from large-scale field monitoring during multiple years, shows that serious concern about the far-reaching consequences of the abundant use of imidacloprid for aquatic ecosystems is justified.

  3. Macro-Invertebrate Decline in Surface Water Polluted with Imidacloprid

    Science.gov (United States)

    Van Dijk, Tessa C.; Van Staalduinen, Marja A.; Van der Sluijs, Jeroen P.

    2013-01-01

    Imidacloprid is one of the most widely used insecticides in the world. Its concentration in surface water exceeds the water quality norms in many parts of the Netherlands. Several studies have demonstrated harmful effects of this neonicotinoid to a wide range of non-target species. Therefore we expected that surface water pollution with imidacloprid would negatively impact aquatic ecosystems. Availability of extensive monitoring data on the abundance of aquatic macro-invertebrate species, and on imidacloprid concentrations in surface water in the Netherlands enabled us to test this hypothesis. Our regression analysis showed a significant negative relationship (Pmacro-invertebrate abundance and imidacloprid concentration for all species pooled. A significant negative relationship was also found for the orders Amphipoda, Basommatophora, Diptera, Ephemeroptera and Isopoda, and for several species separately. The order Odonata had a negative relationship very close to the significance threshold of 0.05 (P = 0.051). However, in accordance with previous research, a positive relationship was found for the order Actinedida. We used the monitoring field data to test whether the existing three water quality norms for imidacloprid in the Netherlands are protective in real conditions. Our data show that macrofauna abundance drops sharply between 13 and 67 ng l−1. For aquatic ecosystem protection, two of the norms are not protective at all while the strictest norm of 13 ng l−1 (MTR) seems somewhat protective. In addition to the existing experimental evidence on the negative effects of imidacloprid on invertebrate life, our study, based on data from large-scale field monitoring during multiple years, shows that serious concern about the far-reaching consequences of the abundant use of imidacloprid for aquatic ecosystems is justified. PMID:23650513

  4. Atmospheric Concentrations of Persistent Organic Pollutants in the Southern Ocean

    Science.gov (United States)

    Vlahos, P.; Edson, J.; Cifuentes, A.; McGillis, W. R.; Zappa, C.

    2008-12-01

    Long-range transport of persistent organic pollutant (POPs) is a global concern. Remote regions such as the Southern Ocean are greatly under-sampled though critical components in understanding POPs cycling. Over 20 high-volume air samples were collected in the Southern Ocean aboard the RV Brown during the GASEX III experiment between Mar 05 to April 9 2008. The relatively stationary platform (51S,38W) enabled the collection of a unique atmospheric time series at this open ocean station. Air sampling was also conducted across transects from Punto Arenas, Chile and to Montevideo, Uruguay. Samples were collected using glass sleeves packed with poly-urethane foam plugs and C-18 resin in order to collect target organic pollutants (per-fluorinated compounds, currently and historically used pesticides) in this under-sampled region. Here we present POPs concentrations and trends over the sampled period and compare variations with air parcel back trajectories to establish potential origins of their long-range transport.

  5. Isolation of Crude Oil from Polluted Waters Using Biosurfactants Pseudomonas Bacteria: Assessment of Bacteria Concentration Effects

    Directory of Open Access Journals (Sweden)

    A. Khalifeh

    2013-04-01

    Full Text Available Biological decomposition techniques and isolation of environmental pollutions using biosurfactants bacteria are effective methods of environmental protection. Surfactants are amphiphilic compounds that are produced by local microorganisms and are able to reduce the surface and the stresses between surfaces. As a result, they will increase solubility, biological activity, and environmental decomposition of organic compounds. This study analyzes the effects of biosurfactants on crude oil recovery and its isolation using pseudomonas sea bacteria species. Preparation of biosurfactants was done in glass flasks and laboratory conditions. Experiments were carried out to obtain the best concentration of biosurfactants for isolating oil from water and destroying oil-in-water or water-in-oil emulsions in two pH ranges and four saline solutions of different concentrations. The most effective results were gained when a concentration of 0.1% biosurfactants was applied.

  6. Field investigation of physical and chemical mechanisms affecting pollutant concentrations in fog droplets

    Energy Technology Data Exchange (ETDEWEB)

    Jacob, D.J.; Waldman, J.M.; Munger, J.W.; Hoffmann, M.R.

    1984-09-01

    High ionic loadings were found in fogwater collected at Bakersfield, California during an extended stagnation episode. The major ions were NH4(+), NO3(-), and SO4(2-), with concentrations usually in the millimolar range. Droplet growth played an important role in determining fogwater concentrations. The amount of solute decreased substantially over the course of each fog event this was attributed, at least in part, to deposition of fog droplets on surfaces. The occurrence of this was attributed, at least in part, to deposition of fog droplets on surfaces. The sulfate fraction in the aerosol increased appreciably over several days of stagnation, but no statistical evidence for in situ S(IV) aqueous-phase oxidation was found. The high ammonia concentrations present were sufficient to neutralize a large fraction of the ambient acidity. As a result, fogwater pH values rarely attained the extremely low values found in other polluted environments. 46 references.

  7. Models of Fate and Transport of Pollutants in Surface Waters

    Science.gov (United States)

    Okome, Gloria Eloho

    2013-01-01

    There is the need to answer very crucial questions of "what happens to pollutants in surface waters?" This question must be answered to determine the factors controlling fate and transport of chemicals and their evolutionary state in surface waters. Monitoring and experimental methods are used in establishing the environmental states.…

  8. A physical explanation of the lognormality of pollutant concentrations

    International Nuclear Information System (INIS)

    Ott, W.R.

    1990-01-01

    Investigators in different environmental fields have reported that the concentrations of various measured substances have frequency distributions that are lognormal, or nearly so. That is, when the logarithms of the observed concentrations are plotted as a frequency distribution, the resulting distribution is approximately normal, or Gaussian, over much of the observed range. Examples include radionuclides in soil, pollutants in ambient air, indoor air quality, trace metals in streams, metals in biological tissue, calcium in human remains. The ubiquity of the lognormal distribution in environmental processes is surprising and has not been adequately explained, since common processes in nature (for example, computation of the mean and the analysis of error) usually give rise to distributions that are normal rather than lognormal. This paper takes the first step toward explaining why lognormal distributions can arise naturally from certain physical processes that are analogous to those found in the environment. In this paper, these processes are treated mathematically, and the results are illustrated in a laboratory beaker experiment that is simulated on the computer

  9. Effects of environment pollution on the ocular surface.

    Science.gov (United States)

    Jung, Se Ji; Mehta, Jodhbir S; Tong, Louis

    2018-04-01

    The twenty-first century is fraught with dangers like climate change and pollution, which impacts human health and mortality. As levels of pollution increase, respiratory illnesses and cardiovascular ailments become more prevalent. Less understood are the eye-related complaints, which are commonly associated with increasing pollution. Affected people may complain of irritation, redness, foreign body sensation, tearing, and blurring of vision. Sources of pollution are varied, ranging from gases (such as ozone and NO 2 ) and particulate matter produced from traffic, to some other hazards associated with indoor environments. Mechanisms causing ocular surface disease involve toxicity, oxidative stress, and inflammation. Homeostatic mechanisms of the ocular surface may adapt to certain chronic changes in the environment, so affected people may not always be symptomatic. However there are many challenges associated with assessing effects of air pollution on eyes, as pollution is large scale and difficult to control. Persons with chronic allergic or atopic tendencies may have a pre-existing state of heightened mucosal immune response, hence they may have less tolerance for further environmental antigenic stimulation. It is beneficial to identify vulnerable people whose quality of life will be significantly impaired by environmental changes and provide counter measures in the form of protection or treatment. Better technologies in monitoring of pollutants and assessment of the eye will facilitate progress in this field. Copyright © 2018 Elsevier Inc. All rights reserved.

  10. Satellite monitoring of sea surface pollution

    Science.gov (United States)

    Fielder, G.; Telfer, D. J. (Principal Investigator)

    1979-01-01

    The author has identified the following significant results. Image processing techniques developed are well adapted to the exploration and isolation of local areas which exhibit small temperature differences between themselves and their surroundings. In the worst case of imagery of small areal extent of sea surface having no coastal boundary in the area, there is yet no method of distinguishing unambiguously an oil spill from fog, cloud, the effect produced by shallow sediments, or the effects of naturally occuring thermal fronts. In the case of uniform slicks of liquid North Sea oil in still air, laboratory simulation experiments show that, for oil thicknesses in excess of 1 or 2 mm, there is, under equilibrium conditions, little dependence of oil surface temperature on the thickness of the oil layer. The surface temperature of oil is consistently higher than that of water, the difference being about 1 K at low values of relative humidity, but tending to increase as the relative humidity increases.

  11. High Concentrations of Ozone Air Pollution on Mount Everest: Health Implications for Sherpa Communities and Mountaineers.

    Science.gov (United States)

    Semple, John L; Moore, G W Kent; Koutrakis, Petros; Wolfson, Jack M; Cristofanelli, Paolo; Bonasoni, Paolo

    2016-12-01

    Semple, John L., G.W. Kent Moore, Petros Koutrakis, Jack M. Wolfson, Paolo Cristofanelli, and Paolo Bonasoni. High concentrations of ozone air pollution on Mount Everest: health implications for Sherpa communities and mountaineers. High Alt Med Biol. 17:365-369, 2016.-Introduction: Populations in remote mountain regions are increasingly vulnerable to multiple climate mechanisms that influence levels of air pollution. Few studies have reported on climate-sensitive health outcomes unique to high altitude ecosystems. In this study, we report on the discovery of high-surface ozone concentrations and the potential impact on health outcomes on Mount Everest and the high Himalaya. Surface ozone measurements were collected during ascending transects in the Mount Everest region of Nepal with passive nitrite-coated Ogawa filter samplers to obtain 8-hour personal exposures (2860-5364 m asl). In addition, the Nepal Climate Observatory-Pyramid, a GAW-WMO Global Station sited in the Khumbu Valley (5079 m asl), collected ozone mixing ratios with photometric gas analyzer. Surface ozone measurements increased with altitude with concentrations that exceed 100 ppb (8-hour exposure). Highest values were during the spring season and the result of diverse contributions: hemispheric background values, the descent of ozone-rich stratospheric air, and the transport of tropospheric pollutants occurring at different spatial scales. Multiple climate factors, including descending stratospheric ozone and imported anthropogenic air masses from the Indo-Gangetic Plain, contribute to ambient ozone exposure levels in the vicinity of Mount Everest that are similar to if not higher than those reported in industrialized cities.

  12. Stormwater Priority Pollutants Versus Surface Water Quality Criteria

    DEFF Research Database (Denmark)

    Eriksson, Eva; Ledin, Anna; Baun, Anders

    2011-01-01

    Stormwater in urban areas comprises of a substantial part of the urban water cycle, dominating the flow in many small urban streams, and the pollution levels are sizeable. No stormwater quality criteria were found here and no European or national emission limit values exist. Stormwater pollutants...... however are present in levels exceeding most of the regulated surface water quality criteria and environmental quality standards. Therefore catchment characterisation is needed to chose suitable treatment prior to discharge into receiving surface waters, as the mixing may be insufficient in small streams....

  13. Prediction of Air Pollutants Concentration Based on an Extreme Learning Machine: The Case of Hong Kong

    OpenAIRE

    Zhang, Jiangshe; Ding, Weifu

    2017-01-01

    With the development of the economy and society all over the world, most metropolitan cities are experiencing elevated concentrations of ground-level air pollutants. It is urgent to predict and evaluate the concentration of air pollutants for some local environmental or health agencies. Feed-forward artificial neural networks have been widely used in the prediction of air pollutants concentration. However, there are some drawbacks, such as the low convergence rate and the local minimum. The e...

  14. Air pollutant concentrations near three Texas roadways, Part I: Ultrafine particles

    Science.gov (United States)

    Zhu, Yifang; Pudota, Jayanth; Collins, Donald; Allen, David; Clements, Andrea; DenBleyker, Allison; Fraser, Matt; Jia, Yuling; McDonald-Buller, Elena; Michel, Edward

    Vehicular emitted air pollutant concentrations were studied near three types of roadways in Austin, Texas: (1) State Highway 71 (SH-71), a heavily traveled arterial highway dominated by passenger vehicles; (2) Interstate 35 (I-35), a limited access highway north of Austin in Georgetown; and (3) Farm to Market Road 973 (FM-973), a heavily traveled surface roadway dominated by truck traffic. Air pollutants examined include carbon monoxide (CO), oxides of nitrogen (NO x), and carbonyl species in the gas-phase. In the particle phase, ultrafine particle (UFP) concentrations (diameter road were found to be the most important factors determining UFP concentrations near the roadways. Since wind directions were not consistent during the sampling periods, distances along wind trajectories from the roadway to the sampling points were used to study the decay characteristics of UFPs. Under perpendicular wind conditions, for all studied roadway types, particle number concentrations increased dramatically moving from the upwind side to the downwind side. The elevated particle number concentrations decay exponentially with increasing distances from the roadway with sharp concentration gradients observed within 100-150 m, similar to previously reported studies. A single exponential decay curve was found to fit the data collected from all three roadways very well under perpendicular wind conditions. No consistent pattern was observed for UFPs under parallel wind conditions. However, regardless of wind conditions, particle concentrations returned to background levels within a few hundred meters of the roadway. Within measured UFP size ranges, smaller particles (6-25 nm) decayed faster than larger ones (100-300 nm). Similar decay rates were observed among UFP number, surface, and volume.

  15. Radiological monitoring. Controlling surface water pollution

    International Nuclear Information System (INIS)

    Morin, Maxime

    2018-01-01

    Throughout France, surface waters (from rivers to brooks) located at the vicinity of nuclear or industrial sites, are subject to regular radiological monitoring. An example is given with the radiological monitoring of a small river near La Hague Areva's plant, where contaminations have been detected with the help of the French IRSN nuclear safety research organization. The sampling method and various measurement types are described

  16. Pollution distribution of heavy metals in surface soil at an informal electronic-waste recycling site.

    Science.gov (United States)

    Fujimori, Takashi; Takigami, Hidetaka

    2014-02-01

    We studied distribution of heavy metals [lead (Pb), copper (Cu) and zinc (Zn)] in surface soil at an electronic-waste (e-waste) recycling workshop near Metro Manila in the Philippines to evaluate the pollution size (spot size, small area or the entire workshop), as well as to assess heavy metal transport into the surrounding soil environment. On-site length-of-stride-scale (~70 cm) measurements were performed at each surface soil point using field-portable X-ray fluorescence (FP-XRF). The surface soil at the e-waste recycling workshop was polluted with Cu, Zn and Pb, which were distributed discretely in surface soil. The site was divided into five areas based on the distance from an entrance gate (y-axis) of the e-waste recycling workshop. The three heavy metals showed similar concentration gradients in the y-axis direction. Zn, Pb and Cu concentrations were estimated to decrease to half of their maximum concentrations at ~3, 7 and 7 m from the pollution spot, respectively, inside the informal e-waste recycling workshop. Distance from an entrance may play an important role in heavy metal transport at the soil surface. Using on-site FP-XRF, we evaluated the metal ratio to characterise pollution features of the solid surface. Variability analysis of heavy metals revealed vanishing surficial autocorrelation over metre ranges. Also, the possibility of concentration prediction at unmeasured points using geostatistical kriging was evaluated, and heavy metals had a relative "small" pollution scales and remained inside the original workshop compared with toxic organohalogen compounds. Thus, exposure to heavy metals may directly influence the health of e-waste workers at the original site rather than the surrounding habitat and environmental media.

  17. Increased serum concentrations of persistent organic pollutants among prediabetic individuals

    DEFF Research Database (Denmark)

    Færch, Kristine Villum; Højlund, Kurt; Vind, Birgitte Falbe

    2012-01-01

    There is a need for a better understanding of the potential role of persistent organic pollutants (POPs) in the pathogenesis of type 2 diabetes.......There is a need for a better understanding of the potential role of persistent organic pollutants (POPs) in the pathogenesis of type 2 diabetes....

  18. Microplastic pollution in the surface waters of Italian Subalpine Lakes.

    Science.gov (United States)

    Sighicelli, Maria; Pietrelli, Loris; Lecce, Francesca; Iannilli, Valentina; Falconieri, Mauro; Coscia, Lucia; Di Vito, Stefania; Nuglio, Simone; Zampetti, Giorgio

    2018-05-01

    Plastic debris incidence in marine environment was already highlighted in the early 1970s. Over the last decade, microplastic pollution in the environment has received increasing attention and is now an emerging research area. Many studies have focused on quantifying microplastic abundance in the marine environment, while there are relatively few data on microplastic occurrence in freshwater environment. Recent studies have reported high concentrations of microplastics in lakes and rivers, although the understanding of several factors influencing source, transport and fate is still limited. This study compares different lakes and the common factors, which could influence the occurrence and distribution of microplastics. The three subalpine lakes monitored include Lake Maggiore, Iseo and Garda. The selected sampling transects reflect the hydrologic conditions, the morphometric characteristics of these lakes, and other factors influencing the release of plastics debris in lakes. Particles of microplastics (<5 mm) were found in all sampled surfaces. The particles collected were classified depending on their number, shape and composition. The shape distribution showed the dominating occurrence of fragments (73.7%). The chemical composition of all examined samples clearly shows dominating presence of polyethylene (45%), polystyrene (18%) and polypropylene (15%). The results provide significant relations among the different contribution of direct and diffuse sources to the quantity of microplastics, highlighting the importance of understanding the spatial distribution dynamics of microplastics within a lake system that acts as a sink and source of plastic particles. Copyright © 2018 Elsevier Ltd. All rights reserved.

  19. The measurement of dry deposition and surface runoff to quantify urban road pollution in Taipei, Taiwan.

    Science.gov (United States)

    Wang, Yunn-Jinn; Chen, Chi-Feng; Lin, Jen-Yang

    2013-10-16

    Pollutants deposited on road surfaces and distributed in the environment are a source of nonpoint pollution. Field data are traditionally hard to collect from roads because of constant traffic. In this study, in cooperation with the traffic administration, the dry deposition on and road runoff from urban roads was measured in Taipei City and New Taipei City, Taiwan. The results showed that the dry deposition is 2.01-5.14 g/m(2) · day and 78-87% of these solids are in the 75-300 µm size range. The heavy metals in the dry deposited particles are mainly Fe, Zn, and Na, with average concentrations of 34,978, 1,519 and 1,502 ppm, respectively. Elevated express roads show the highest heavy metal concentrations. Not only the number of vehicles, but also the speed of the traffic should be considered as factors that influence road pollution, as high speeds may accelerate vehicle wear and deposit more heavy metals on road surfaces. In addition to dry deposition, the runoff and water quality was analyzed every five minutes during the first two hours of storm events to capture the properties of the first flush road runoff. The sample mean concentration (SMC) from three roads demonstrated that the first flush runoff had a high pollution content, notably for suspended solid (SS), chemical oxygen demand (COD), oil and grease, Pb, and Zn. Regular sweeping and onsite water treatment facilities are suggested to minimize the pollution from urban roads.

  20. Diffraction experiments of argon or helium on polluted surfaces

    International Nuclear Information System (INIS)

    Berthier, J.P.; Constans, A.; Daury, G.; Lostis, P.

    1975-01-01

    Scattering patterns of molecular beams of argon or helium from metal surfaces (bulk metal or thin films) are reported. The pressure in the scattering chamber is about 10 -6 torr. So, the surfaces are polluted. Diffraction peaks are observed which can be interpreted very well by assuming that nitrogen, oxygen or carbon atoms are adsorbed of the surface. On the other hand, diffraction peaks from a silicon crystal have been observed which can be reproduced very well by using silicon crystal lattice. These experiments are not interpreted accurately, but show that molecular reflection can be used for some surface studies [fr

  1. Study on Relationship between Seasonal Temperatures and Municipal Wastewater Pollutant Concentration and Removal Rate

    Directory of Open Access Journals (Sweden)

    Yuan Shaoxiong

    2016-01-01

    Full Text Available In this study, the temperatures, pollutant concentrations and other indicators of municipal wastewater influent and effluent were tested for 7 months in 6 constructed wetland microcosms; the hydraulic retention time is 2 days. The results indicated that for both influent and effluent, there was a highly significant negative correlation (P<0.01 between the temperature and the pollutant concentrations, there was a significant difference (P<0.05 between seasonal temperatures, and the pollutant concentrations in summer and autumn were significantly different from those in winter (P<0.05. Furthermore, a regression analysis of pollutant concentration (y based on changes in water temperature (x in different seasons was performed. The analysis revealed that the relationship has the form ‘y = a -bx + cx2’, that under certain circumstances, pollutant concentrations can be calculated based on the temperature, and that the concentrations of NH4-N, Total Phosphorus (TP and Soluble Reactive Phosphorus (SRP had a significantly negative correlation with their removal rate (P < 0.01. However, seasonal temperature clearly did not have a direct impact on the pollutant concentration, and some studies have indicated that the different manners in which urban residents use water as the temperature changes may be the real reason that the pollutant concentrations of municipal wastewater vary with seasonal temperature. Furthermore, when designing and operating constructed wetlands, the impact of the changes in pollutant concentrations generated by seasonal temperature should be fully considered, dilution and other means should be taken to ensure purification.

  2. Physicochemical properties of concentrated Martian surface waters

    Science.gov (United States)

    Tosca, Nicholas J.; McLennan, Scott M.; Lamb, Michael P.; Grotzinger, John P.

    2011-05-01

    Understanding the processes controlling chemical sedimentation is an important step in deciphering paleoclimatic conditions from the rock records preserved on both Earth and Mars. Clear evidence for subaqueous sedimentation at Meridiani Planum, widespread saline mineral deposits in the Valles Marineris region, and the possible role of saline waters in forming recent geomorphologic features all underscore the need to understand the physical properties of highly concentrated solutions on Mars in addition to, and as a function of, their distinct chemistry. Using thermodynamic models predicting saline mineral solubility, we generate likely brine compositions ranging from bicarbonate-dominated to sulfate-dominated and predict their saline mineralogy. For each brine composition, we then estimate a number of thermal, transport, and colligative properties using established models that have been developed for highly concentrated multicomponent electrolyte solutions. The available experimental data and theoretical models that allow estimation of these physicochemical properties encompass, for the most part, much of the anticipated variation in chemistry for likely Martian brines. These estimates allow significant progress in building a detailed analysis of physical sedimentation at the ancient Martian surface and allow more accurate predictions of thermal behavior and the diffusive transport of matter through chemically distinct solutions under comparatively nonstandard conditions.

  3. Satellite constraints on surface concentrations of particulate matter

    Science.gov (United States)

    Ford Hotmann, Bonne

    Because of the increasing evidence of the widespread adverse effects on human health from exposure to poor air quality and the recommendations of the World Health Organization to significantly reduce PM2.5 in order to reduce these risks, better estimates of surface air quality globally are required. However, surface measurements useful for monitoring particulate exposure are scarce, especially in developing countries which often experience the worst air pollution. Therefore, other methods are necessary to augment estimates in regions with limited surface observations. The prospect of using satellite observations to infer surface air quality is attractive; however, it requires knowledge of the complicated relationship between satellite-observed aerosol optical depth (AOD) and surface concentrations. This dissertation explores how satellite observations can be used in conjunction with a chemical transport model (GEOS-Chem) to better understand this relationship. First, we investigate the seasonality in aerosols over the Southeastern United States using observations from several satellite instruments (MODIS, MISR, CALIOP) and surface network sites (IMPROVE, SEARCH, AERONET). We find that the strong summertime enhancement in satellite-observed aerosol optical depth (factor 2-3 enhancement over wintertime AOD) is not present in surface mass concentrations (25-55% summertime enhancement). Goldstein et al. [2009] previously attributed this seasonality in AOD to biogenic organic aerosol; however, surface observations show that organic aerosol only accounts for ~35% of PM2.5 mass and exhibits similar seasonality to total surface PM2.5. The GEOS-Chem model generally reproduces these surface aerosol measurements, but under represents the AOD seasonality observed by satellites. We show that seasonal differences in water uptake cannot sufficiently explain the magnitude of AOD increase. As CALIOP profiles indicate the presence of additional aerosol in the lower troposphere

  4. Comparing wastewater chemicals, indicator bacteria concentrations, and bacterial pathogen genes as fecal pollution indicators

    Science.gov (United States)

    Haack, S.K.; Duris, J.W.; Fogarty, L.R.; Kolpin, D.W.; Focazio, M.J.; Furlong, E.T.; Meyer, M.T.

    2009-01-01

    The objective of this study was to compare fecal indicator bacteria (FIB) (fecal coliforms, Escherichia coli [EC], and enterococci [ENT]) concentrations with a wide array of typical organic wastewater chemicals and selected bacterial genes as indicators of fecal pollution in water samples collected at or near 18 surface water drinking water intakes. Genes tested included esp (indicating human-pathogenic ENT) and nine genes associated with various animal sources of shiga-toxin-producing EC (STEC). Fecal pollution was indicated by genes and/or chemicals for 14 of the 18 tested samples, with little relation to FIB standards. Of 13 samples with <50 EC 100 mL-1, human pharmaceuticals or chemical indicators of wastewater treatment plant effluent occurred in six, veterinary antibiotics were detected in three, and stx1 or stx2 genes (indicating varying animal sources of STEC) were detected in eight. Only the EC eaeA gene was positively correlated with FIB concentrations. Human-source fecal pollution was indicated by the esp gene and the human pharmaceutical carbamazepine in one of the nine samples that met all FIB recreational water quality standards. Escherichia coli rfbO157 and stx2c genes, which are typically associated with cattle sources and are of potential human health significance, were detected in one sample in the absence of tested chemicals. Chemical and gene-based indicators of fecal contamination may be present even when FIB standards are met, and some may, unlike FIB, indicate potential sources. Application of multiple water quality indicators with variable environmental persistence and fate may yield greater confidence in fecal pollution assessment and may inform remediation decisions. Copyright ?? 2009 by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America. All rights reserved.

  5. Comparing wastewater chemicals, indicator bacteria concentrations, and bacterial pathogen genes as fecal pollution indicators

    Science.gov (United States)

    Haack, S.K.; Duris, J.W.; Fogarty, L.R.; Kolpin, D.W.; Focazio, M.J.; Furlong, E.T.; Meyer, M.T.

    2009-01-01

    The objective of this study was to compare fecal indicator bacteria (FIB) (fecal coliforms, Escherichia coli [EC], and enterococci [ENT]) concentrations with a wide array of typical organic wastewater chemicals and selected bacterial genes as indicators of fecal pollution in water samples collected at or near 18 surface water drinking water intakes. Genes tested included esp (indicating human-pathogenic ENT) and nine genes associated with various animal sources of shiga-toxin-producing EC (STEC). Fecal pollution was indicated by genes and/or chemicals for 14 of the 18 tested samples, with little relation to FIB standards. Of 13 samples with of wastewater treatment plant effluent occurred in six, veterinary antibiotics were detected in three, and stx1 or stx2 genes (indicating varying animal sources of STEC) were detected in eight. Only the EC eaeA gene was positively correlated with FIB concentrations. Human-source fecal pollution was indicated by the esp gene and the human pharmaceutical carbamazepine in one of the nine samples that met all FIB recreational water quality standards. Escherichia coli rfbO157 and stx2c genes, which are typically associated with cattle sources and are of potential human health significance, were detected in one sample in the absence of tested chemicals. Chemical and gene-based indicators of fecal contamination may be present even when FIB standards are met, and some may, unlike FIB, indicate potential sources. Application of multiple water quality indicators with variable environmental persistence and fate may yield greater confidence in fecal pollution assessment and may inform remediation decisions. Copyright ?? 2009 by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America. All rights reserved.

  6. Distribution and pollution assessment of heavy metals in surface sediments in the Yellow Sea.

    Science.gov (United States)

    Jiang, Xin; Teng, Ankang; Xu, Wenzhe; Liu, Xiaoshou

    2014-06-15

    Heavy metal concentrations in surface sediments at 56 stations during two cruises in the Yellow Sea in summer and winter, 2011 were analyzed by inductively coupled plasma-mass spectrometry. The pollution status was assessed via the Geoaccumulation index and Hankanson potential ecological risk index. Higher concentrations of heavy metals (except for Mn) were found in the central Southern Yellow Sea and the western Northern Yellow Sea. The higher contents of Mn were much closer to Shandong Peninsula. Correlation analyses indicated that Pb, Cu, Fe, Ni, Zn and Co probably had the same origin and were controlled by grain size and total organic carbon. Pollution assessment showed that most areas of the Yellow Sea were not or lowly contaminated with the exception of the northwest and south parts of the Southern Yellow Sea showing Cd-contamination. The pollution status of the Yellow Sea in summer was worse than that in winter. Copyright © 2014 Elsevier Ltd. All rights reserved.

  7. The impacts of surface ozone pollution on winter wheat productivity in China – An econometric approach

    International Nuclear Information System (INIS)

    Yi, Fujin; Jiang, Fei; Zhong, Funing; Zhou, Xun; Ding, Aijun

    2016-01-01

    The impact of surface ozone pollution on winter wheat yield is empirically estimated by considering socio-economic and weather determinants. This research is the first to use an economic framework to estimate the ozone impact, and a unique county-level panel is employed to examine the impact of the increasing surface ozone concentration on the productivity of winter wheat in China. In general, the increment of surface ozone concentration during the ozone-sensitive period of winter wheat is determined to be harmful to its yield, and a conservative reduction of ozone pollution could significantly increase China's wheat supply. - Highlights: • We examine the impacts of the surface ozone exposure on winter wheat yield in China. • An econometric method is used to measure the ozone impacts. • The results conclude that surface ozone is harmful to winter wheat yield in China. • We confirm that stress conditions such as drought and air particles can mitigate the adverse effect of ozone. - Surface ozone pollution is harmful to winter wheat yield in China by considering socio-economic determinants, weather, and other stress conditions like drought and air particles.

  8. Current status of surface water pollution in Punjab

    International Nuclear Information System (INIS)

    Bashir, M.T.; Ghauri, Moin-ud-Din

    2001-01-01

    Eleven years investigations (1988-99) on river Ravi revealed that U.C. canal with a capacity of 220 m/sup 3//s at the tail and Q.B. Link canal with capacity of 410 m/sup 3//s are mainly responsible for higher flows during dry season. A decreasing trend has been observed in the DO levels indicating increasing pollution. An increasing trend has been observed in BOD, SS, TDS and Indicators. Even with the discharge of pollution from U.C. canal, Hudiara Nullah and Lahore city BOD at Balkoi was unexpectedly low. Problems confronting environment engineers regarding surface water pollution control has been highlighted and their solutions has been recommended. (author)

  9. Concentrations of pollutant gases in female hostels of the Federal ...

    African Journals Online (AJOL)

    The overall mean values of these gases significantly exceeded Federal Environmental Protection Agency (FEPA) ambient air quality standards, indicating that air quality in the hostels may constitute health risks to the students. Keywords: pollutant gases, female hostile, Nigeria International Journal of Natural and Applied ...

  10. Ozone pollution: rising concentrations despite French and EU efforts

    International Nuclear Information System (INIS)

    Ba, M.; Elichegaray, Ch.

    2003-11-01

    Ozone is the main indicator of photochemical pollution which is caused by a complex combination of primary pollutants formed by chemical reactions in the troposphere, in the presence of sunlight. These primary pollutants, otherwise known as precursors of ozone (nitrogen oxides, volatile organic compounds and carbon monoxide), are emitted both by natural sources and human activities. In urban areas, during the summer months, ozone is often the main cause of deterioration in air quality. Directive 2002/3/EC relating to ozone in ambient air entered into force on 9 September 2003, superseding the first ozone Directive (92/72/CE) of 21 September 1992. In the last 10 years, monitoring of ozone pollution has considerably progressed in France (the number of analysers has increased tenfold). Emissions of the ozone precursors fell significantly (-27%) between 1990 and 2000 in France as a result of combined efforts in all sectors of activity. However, between 1994 and 2002, ozone levels remained above the information threshold for the protection of human health and vegetation on average more than 100 days a year in rural areas and over 40 days a year in urban and peri-urban areas. Efforts undertaken both in France and other European countries aim to improve the situation and ensure compliance with the requirements of Directive 2002/3/EC. (author)

  11. Responses of herbaceous plants to urban air pollution: Effects on growth, phenology and leaf surface characteristics

    International Nuclear Information System (INIS)

    Honour, Sarah L.; Bell, J. Nigel B.; Ashenden, Trevor W.; Cape, J. Neil; Power, Sally A.

    2009-01-01

    Vehicle exhaust emissions are a dominant feature of urban environments and are widely believed to have detrimental effects on plants. The effects of diesel exhaust emissions on 12 herbaceous species were studied with respect to growth, flower development, leaf senescence and leaf surface wax characteristics. A diesel generator was used to produce concentrations of nitrogen oxides (NO x ) representative of urban conditions, in solardome chambers. Annual mean NO x concentrations ranged from 77 nl l -l to 98 nl l -1 , with NO:NO 2 ratios of 1.4-2.2, providing a good experimental simulation of polluted roadside environments. Pollutant exposure resulted in species-specific changes in growth and phenology, with a consistent trend for accelerated senescence and delayed flowering. Leaf surface characteristics were also affected; contact angle measurements indicated changes in surface wax structure following pollutant exposure. The study demonstrated clearly the potential for realistic levels of vehicle exhaust pollution to have direct adverse effects on urban vegetation. - Fumigation experiments demonstrate adverse effects of exhaust emissions on urban vegetation

  12. The protection of urban areas from surface wastewater pollutions

    OpenAIRE

    Vialkova Elena; Zemlyanova Marina; Vorotnikova Anna; Cherkashin Dmitriy; Voronov Andrey; Maksimov Lev

    2017-01-01

    In this paper it considered the problem of collection, treatment and discharge into waters of rain and melted wastewater. To reduce the load on the combined sewer system, there are engineering solutions collect rain and melt water for use in the irrigation of lawns and green spaces. Research carried out at the department “Water supply and sanitation”, (Russia), confirm the high pollution concentrations of meltwater and rainfall in urban arias. Series of measurements of heavy metal in rainwate...

  13. Identification of hotspots and trends of fecal surface water pollution in developing countries

    Science.gov (United States)

    Reder, Klara; Flörke, Martina; Alcamo, Joseph

    2015-04-01

    Water is the essential resource ensuring human life on earth, which can only prosper when water is available and accessible. But of importance is not only the quantity of accessible water but also its quality, which in case of pollution may pose a risk to human health. The pollutants which pose a risk to human health are manifold, covering several groups such as pathogens, nutrients, human pharmaceuticals, heavy metals, and others. With regards to human health, pathogen contamination is of major interest as 4% of all death and 5.7% of disability or ill health in the world can be attributed to poor water supply, sanitation and personal and domestic hygiene. In developing countries, 2.6 billion people lacked access to improved sanitation in 2011. The lack of sanitation poses a risk to surface water pollution which is a threat to human health. A typical indicator for pathogen pollution is fecal coliform bacteria. The objective our study is to assess fecal pollution in the developing regions Africa, Asia and Latin America using the large-scale water quality model WorldQual. Model runs were carried-out to calculate in-stream concentrations and the respective loadings reaching rivers for the time period 1990 to 2010. We identified hotspots of fecal coliform loadings and in-stream concentrations which were further analyzed and ranked in terms of fecal surface water pollution. Main findings are that loadings mainly originate from the domestic sector, thus loadings are high in highly populated areas. In general, domestic loadings can be attributed to the two subsectors domestic sewered and domestic non sewered. The spatial distribution of both sectors varies across catchments. Hotspot pattern of in-stream concentrations are similar to the loadings pattern although they are different in seasonality. As the dilution varies with climate its dilution capacity is high during seasons with high precipitation, which in turn decreases the in-stream concentrations. The fecal

  14. Comparison of indoor air pollutants concentration in two Romanian classrooms

    Science.gov (United States)

    Vasile, Vasilica; Dima, Alina; Zorila, Elena; Istrate, Andrei; Catalina, Tiberiu

    2018-02-01

    This paper investigates the air pollutions in space ventilated in two High School classrooms. The analysis consists of comparison of one classroom with hybrid ventilation system and another one stander-by classroom with natural ventilation. Several studies regarding indoor air quality during the experimental campaign have been done for VOC, CO2, CO, other pollutants, keeping monitored for humidity and temperature. The experimental demonstrated that the highest value for CO2 in stander-by classroom is 2691 ppm and in classroom with hybrid ventilation is 1897 ppm, while values for CO are 1.1 / 1.1 ppm and VOC 0.14 / 0.06 ppm, better use hybrid ventilation.

  15. Surface gas pollutants in Lhasa, a highland city of Tibet: current levels and pollution implications

    Science.gov (United States)

    Ran, L.; Lin, W. L.; Deji, Y. Z.; La, B.; Tsering, P. M.; Xu, X. B.; Wang, W.

    2014-05-01

    Through several years of development, the city of Lhasa has become one of the most populated and urbanized areas on the highest plateau in the world. In the process of urbanization, current and potential air quality issues have been gradually concerned. To investigate the current status of air pollution in Lhasa, various gas pollutants including NOx, CO, SO2 and O3 were continuously measured from June 2012 to May 2013 at an urban site (29.40° N, 91.08° E, 3650 m a.s.l.). The seasonal variations of primary gas pollutants exhibited a peak from November to January with a large variability. High concentrations of primary trace gases almost exclusively occurred under low wind speed and showed no distinct dependence on wind direction, implying local urban emissions to be predominant. A comparison of NO2, CO and SO2 concentrations in summer between 1998 and 2012 indicated a significant increase in emissions of these gas pollutants and a change in their intercorrelations, as a result of a substantial growth in the demand of energy consumption using fossil fuels instead of previously widely used biofuels. The pronounced diurnal double peaks of primary trace gases in all seasons suggested automobile exhaust to be a major emission source in Lhasa. The secondary gas pollutant O3 displayed an average diurnal cycle of a shallow flat peak for about 4-5 h in the afternoon and a minimum in the early morning. Nighttime O3 was sometimes completely consumed by the high level of NOx. Seasonally, the variations of O3 concentrations displayed a low valley in winter and a peak in spring. In autumn and winter, transport largely contributed to the observed O3 concentrations, given its dependence on wind speed and wind direction, while in spring and summer photochemistry played an important role. A more efficient buildup of O3 concentrations in the morning and a higher peak in the afternoon was found in summer 2012 than in 1998. An enhancement in O3 concentrations would be expected in the

  16. The relationships between air pollutants, meteorological parameters and concentration of airborne fungal spores

    International Nuclear Information System (INIS)

    Grinn-Gofron, Agnieszka; Strzelczak, Agnieszka; Wolski, Tomasz

    2011-01-01

    Fungal spores are an important component of bioaerosol and also considered to act as indicator of the level of atmospheric bio-pollution. Therefore, better understanding of these phenomena demands a detailed survey of airborne particles. The objective of this study was to examine the dependence of two the most important allergenic taxa of airborne fungi - Alternaria and Cladosporium - on meteorological parameters and air pollutant concentrations during three consecutive years (2006-2008). This study is also an attempt to create artificial neural network (ANN) forecasting models useful in the prediction of aeroallergen abundance. There were statistically significant relationships between spore concentration and environmental parameters as well as pollutants, confirmed by the Spearman's correlation rank analysis and high performance of the ANN models obtained. The concentrations of Cladosporium and Alternaria spores can be predicted with quite good accuracy from meteorological conditions and air pollution recorded three days earlier. - ANN models predict airspore contents from weather conditions and air pollutant.

  17. The relationships between air pollutants, meteorological parameters and concentration of airborne fungal spores

    Energy Technology Data Exchange (ETDEWEB)

    Grinn-Gofron, Agnieszka, E-mail: agofr@univ.szczecin.p [Department of Plant Taxonomy and Phytogeography, Faculty of Natural Science, University of Szczecin, Waska 13 Street, 71-415 Szczecin (Poland); Strzelczak, Agnieszka [Department of Food Process Engineering, Faculty of Food Science and Fisheries, West Pomeranian University of Technology, Szczecin (Poland); Wolski, Tomasz [Physical Oceanography Laboratory, University of Szczecin (Poland)

    2011-02-15

    Fungal spores are an important component of bioaerosol and also considered to act as indicator of the level of atmospheric bio-pollution. Therefore, better understanding of these phenomena demands a detailed survey of airborne particles. The objective of this study was to examine the dependence of two the most important allergenic taxa of airborne fungi - Alternaria and Cladosporium - on meteorological parameters and air pollutant concentrations during three consecutive years (2006-2008). This study is also an attempt to create artificial neural network (ANN) forecasting models useful in the prediction of aeroallergen abundance. There were statistically significant relationships between spore concentration and environmental parameters as well as pollutants, confirmed by the Spearman's correlation rank analysis and high performance of the ANN models obtained. The concentrations of Cladosporium and Alternaria spores can be predicted with quite good accuracy from meteorological conditions and air pollution recorded three days earlier. - ANN models predict airspore contents from weather conditions and air pollutant.

  18. Characterising urban zinc generation to identify surface pollutant hotspots in a low intensity rainfall climate.

    Science.gov (United States)

    Charters, F J; Cochrane, T A; O'Sullivan, A D

    2017-09-01

    Characterising stormwater runoff quality provides useful insights into the dynamics of pollutant generation and wash off rates. These can be used to prioritise stormwater management strategies. This study examined the effects of a low intensity rainfall climate on zinc contributions from different impermeable urban surface types. First flush (FF) and steady state samples were collected from seven different surfaces for characterisation, and the data were also used to calibrate an event-based pollutant load model to predict individual 'hotspot' surfaces across the catchment. Unpainted galvanised roofs generated very high concentrations of zinc, primarily in the more biologically available dissolved form. An older, unpainted galvanised roof had FF concentrations averaging 32,338 μg/L, while the new unpainted roof averaged 4,782 μg/L. Roads and carparks also had elevated zinc, but FF concentrations averaged only 822-1,584 μg/L. Modelling and mapping expected zinc loads from individual impermeable surfaces across the catchment identified specific commercial roof surfaces to be targeted for zinc management. The results validate a policy strategy to replace old galvanised roof materials and avoid unpainted galvanised roofing in future urban development for better urban water quality outcomes. In the interim, readily-implemented treatment options are required to help mitigate chronic zinc impacts on receiving waterways.

  19. Acid-volatile sulfide and simultaneously extracted metals in surface sediments of the southwestern coastal Laizhou Bay, Bohai Sea: concentrations, spatial distributions and the indication of heavy metal pollution status.

    Science.gov (United States)

    Zhuang, Wen; Gao, Xuelu

    2013-11-15

    Surface sediments were collected from the coastal waters of southwestern Laizhou Bay and the rivers it connects with during summer and autumn 2012. The acid-volatile sulfide (AVS) and simultaneously extracted metals (SEM) were measured to assess the sediment quality. The results showed that not all sediments with [SEM]-[AVS]>0 were capable of causing toxicity because the organic carbon is also an important metal-binding phase in sediments. Suppose the sediments had not been disturbed and the criteria of US Environmental Protection Agency had been followed, heavy metals in this area had no adverse biological effects in both seasons except for few riverine samples. The major ingredient of SEM was Zn, whereas the contribution of Cd - the most toxic metal studied - to SEM was marine sediments. Copyright © 2013 Elsevier Ltd. All rights reserved.

  20. Observation of elevated air pollutant concentrations in a residential neighborhood of Los Angeles California using a mobile platform

    Science.gov (United States)

    Hu, Shishan; Paulson, Suzanne E.; Fruin, Scott; Kozawa, Kathleen; Mara, Steve; Winer, Arthur M.

    2012-05-01

    We observed elevated air pollutant concentrations, especially of ultrafine particles (UFP), black carbon (BC) and NO, across the residential neighborhood of the Boyle Heights Community (BH) of Los Angeles, California. Using an electric vehicle mobile platform equipped with fast response instruments, real-time air pollutant concentrations were measured in BH in spring and summer of 2008. Pollutant concentrations varied significantly in the two seasons, on different days, and by time of day, with an overall average UFP concentration in the residential areas of ∼33 000 cm-3. The averaged UFP, BC, and NO concentrations measured on Soto St, a major surface street in BH, were 57 000 cm-3, 5.1 μg m-3, and 67 ppb, respectively. Concentrations of UFP across the residential areas in BH were nearly uniform spatially, in contrast to other areas in the greater metropolitan area of Los Angeles where UFP concentrations exhibit strong gradients downwind of roadways. We attribute this “UFP cloud” to high traffic volumes, including heavy duty diesel trucks on the freeways which surround and traverse BH, and substantial numbers of high-emitting vehicles (HEVs) on the surface streets traversing BH. Additionally, the high density of stop signs and lights and short block lengths, requiring frequent accelerations of vehicles, may contribute. The data also support a role for photochemical production of UFP in the afternoon. UFP concentration peaks (5 s average) of up to 9 million particles cm-3 were also observed immediately behind HEVs when they accelerated from stop lights in the BH neighborhood and areas immediately adjacent. Although encounters with HEV during mornings accounted for only about 6% and 17% of time spent monitoring residential areas and major surface streets, HEV contributed to about 28% and 53% of total ultrafine particles measured on the route, respectively. The observation of elevated pollutant concentrations across the Boyle Heights community highlights

  1. The Measurement of Dry Deposition and Surface Runoff to Quantify Urban Road Pollution in Taipei, Taiwan

    Directory of Open Access Journals (Sweden)

    Jen-Yang Lin

    2013-10-01

    Full Text Available Pollutants deposited on road surfaces and distributed in the environment are a source of nonpoint pollution. Field data are traditionally hard to collect from roads because of constant traffic. In this study, in cooperation with the traffic administration, the dry deposition on and road runoff from urban roads was measured in Taipei City and New Taipei City, Taiwan. The results showed that the dry deposition is 2.01–5.14 g/m2·day and 78–87% of these solids are in the 75–300 µm size range. The heavy metals in the dry deposited particles are mainly Fe, Zn, and Na, with average concentrations of 34,978, 1,519 and 1,502 ppm, respectively. Elevated express roads show the highest heavy metal concentrations. Not only the number of vehicles, but also the speed of the traffic should be considered as factors that influence road pollution, as high speeds may accelerate vehicle wear and deposit more heavy metals on road surfaces. In addition to dry deposition, the runoff and water quality was analyzed every five minutes during the first two hours of storm events to capture the properties of the first flush road runoff. The sample mean concentration (SMC from three roads demonstrated that the first flush runoff had a high pollution content, notably for suspended solid (SS, chemical oxygen demand (COD, oil and grease, Pb, and Zn. Regular sweeping and onsite water treatment facilities are suggested to minimize the pollution from urban roads.

  2. Pathogenic and nonpathogenic Acanthamoeba spp. in thermally polluted discharges and surface waters

    Energy Technology Data Exchange (ETDEWEB)

    de Jonckheere, J.F.

    1981-02-01

    During spring and autumn, the total number of amoebae and the number of acanthamoeba species able to grow at 37 degrees C were determined in six thermally polluted factory discharges and the surrounding surface waters. The isolated Acanthamoeba strains were studied for growth in axenic medium, cytopathic effect in Vito cell cultures, and virulence in mice. Although more amoebae were isolated in autumn, the number of Acanthamoeba species was lower than in spring, when the percent of pathogenic strains among the isolates was highest. Higher concentrations of amoebae were found in warm discharges, and more virulent strains occurred in thermal discharges than in surface waters.

  3. Pathogenic and nonpathogenic Acanthamoeba spp. in thermally polluted discharges and surface waters

    International Nuclear Information System (INIS)

    de Jonckheere, J.F.

    1981-01-01

    During spring and autumn, the total number of amoebae and the number of acanthamoeba species able to grow at 37 degrees C were determined in six thermally polluted factory discharges and the surrounding surface waters. The isolated Acanthamoeba strains were studied for growth in axenic medium, cytopathic effect in Vito cell cultures, and virulence in mice. Although more amoebae were isolated in autumn, the number of Acanthamoeba species was lower than in spring, when the percent of pathogenic strains among the isolates was highest. Higher concentrations of amoebae were found in warm discharges, and more virulent strains occurred in thermal discharges than in surface waters

  4. Contribution of GIS to evaluate surface water pollution by heavy metals: Case of Ichkeul Lake (Northern Tunisia)

    Science.gov (United States)

    Yazidi, Amira; Saidi, Salwa; Ben Mbarek, Nabiha; Darragi, Fadila

    2017-10-01

    The concentrations of nutrients and heavy elements in the surface water of the lake Ichkeul, main wadis which feed directly and thermal springs that flow into the lake, are measured to evaluate these chemical elements. There are used to highlight the interactions between these different aquatic compartments of Ichkeul. All metal concentrations in lake water, except Cu, were lower than the maximum permitted concentration for the protection of aquatic life. The results show that the highest concentrations are located in the eastern and south-eastern part of the lake where the polluted water comes from the lagoon of Bizerte through the wadi Tinja as well as from the city of Mateur through the wadi Joumine. The pollution indices and especially the heavy metal evaluation index (HEI) show high pollution specially located at the mouths of wadis and an increase of heavy metal concentrations, as a result of uncontrolled releases of domestic and industrial wastewater.

  5. The composition of pollutted air in Moscow based on surface observations

    Science.gov (United States)

    Pankratova, Natalia; Elansky, Nikolai; Skorokhod, Andrey

    2013-04-01

    Moscow is the one of the biggest world megacities. Population, industry, transport are strong sources of air pollution. This pollution influences on the air quality in the city and in the neighbor regions due to spreading by the wind. Here we present an analysis of variations of atmospheric compounds in Moscow since 2002 until the present in its dependence on different atmospheric characteristics, particularly cyclonic and anticyclonic conditions, heat waves and anthropogenic factors. The following variables are considered: NO2, NO, CO, CO2, O3, SO2, NMHC. The monitoring site is located at Moscow State University meteorological observatory on the South-West of Moscow. All observations are provided by A.M. Obukhov Institute of Atmospheric Physics RAS. Due to these continuous measurements, the typical (ore basic) level of pollution as well as the extreme cases have been studied. The temporal variability of the atmospheric compounds, and the chemical interaction of ozone and nitrogen oxides are investigated. High concentrations of nitrogen oxides are observed throughout the year. During some months the 90th NO2 percentile exceeds 60 ppb, NO - 80 ppb. Based on surface observations, we show that extremes of pollutant concentrations correspond with anticyclonic conditions and anthropogenic processes. These often increase the impact on the weather. These situations correspond with the anomalous cold winter in 2006 and heat wave in 2002. In these periods, concentrations of air pollutions exceed MAC, but the ozone concentration usually decreases due to interaction with NOx. Only two times, ozone concentration exceeded MAC - the heat waves 2002 and 2010. Also in the study we obtain the logarithmic dependence between ozone mix ratio and NO2/NO, which can be used for prediction of the surface ozone concentrations in Moscow: [O3] = 12.22Ln([NO2]/[NO]) + 15.3 However, this equation is not possible to use in smog conditions. From 29 July to 15 August Moscow was in a dense smoke

  6. Concentration reduction of selected pollutants in fish culture ...

    African Journals Online (AJOL)

    Their effluent treatment ability were evaluated in terms of reduction made to concentration of total ammonia nitrogen (TAN), nitrite nitrogen (NO2-N), nitrate nitrogen (NO3-N), total dissolved solids (TDS) and total suspended solids (TSS) in treated wastewater. Culture effluents collected from the fish rearing tanks in African ...

  7. Lead Concentrations and Risk Exposure Assessment in Surface ...

    African Journals Online (AJOL)

    ADOWIE PERE

    µm, < 250 µm, and < 75 µm of surface soils at undeveloped residential lands leased to auto-mechanic artisans for a minimum of ten years and estimated exposure risk for children that will reside on the polluted lands after the lease periods. Soil-Pb levels ranges obtained were ... Other factors considered were closeness to.

  8. Surface ozone background in the United States: Canadian and Mexican pollution influences

    Science.gov (United States)

    Wang, Huiqun; Jacob, Daniel J.; Le Sager, Philippe; Streets, David G.; Park, Rokjin J.; Gilliland, Alice B.; van Donkelaar, A.

    We use a global chemical transport model (GEOS-Chem) with 1° × 1° horizontal resolution to quantify the effects of anthropogenic emissions from Canada, Mexico, and outside North America on daily maximum 8-hour average ozone concentrations in US surface air. Simulations for summer 2001 indicate mean North American and US background concentrations of 26 ± 8 ppb and 30 ± 8 ppb, as obtained by eliminating anthropogenic emissions in North America vs. in the US only. The US background never exceeds 60 ppb in the model. The Canadian and Mexican pollution enhancement averages 3 ± 4 ppb in the US in summer but can be occasionally much higher in downwind regions of the northeast and southwest, peaking at 33 ppb in upstate New York (on a day with 75 ppb total ozone) and 18 ppb in southern California (on a day with 68 ppb total ozone). The model is successful in reproducing the observed variability of ozone in these regions, including the occurrence and magnitude of high-ozone episodes influenced by transboundary pollution. We find that exceedances of the 75 ppb US air quality standard in eastern Michigan, western New York, New Jersey, and southern California are often associated with Canadian and Mexican pollution enhancements in excess of 10 ppb. Sensitivity simulations with 2020 emission projections suggest that Canadian pollution influence in the Northeast US will become comparable in magnitude to that from domestic power plants.

  9. Nitrate pollution and surface water chemistry in Shimabara, Nagasaki Prefecture, Japan

    Science.gov (United States)

    Nakagawa, K.; Amano, H.

    2017-12-01

    Shimabara city has been experiencing serious nitrate pollution in groundwater. To evaluate nitrate pollution and water chemistry in surface water, water samples were collected at 42 sampling points in 15 rivers in Shimabara including a part of Unzen city from January to February 2017. Firstly, spatial distribution of water chemistry was assessed by describing stiff and piper-trilinear diagrams using major ions concentrations. Most of the samples showed Ca-HCO3 or Ca-(NO3+SO4) water types. It corresponds to groundwater chemistry. Some samples were classified into characteristic water types such as Na-Cl, (Na+K)-HCO3, and Ca-Cl. These results indicate sea water mixing and anthropogenic pollution. At the upstream of Nishi-river, although water chemistry showed Ca-HCO3, ions concentrations were higher than that of the other rivers. It indicates that this site was affected by the peripheral anthropogenic activities. Secondly, nitrate-pollution assessment was performed by using NO3-, NO2-, coprostanol (5β(H)-Cholestan-3β-ol), and cholestanol (5α(H)-Cholestan-3β-ol). NO2-N was detected at the 2 sampling points and exceeded drinking standard 0.9 mg L-1 for bottle-fed infants (WHO, 2011). NO3-N + NO2-N concentrations exceeded Japanese drinking standard 10 mg L-1 at 18 sampling points. The highest concentration was 27.5 mg L-1. Higher NO3-N levels were observed in the rivers in the northern parts of the study area. Coprostanol has been used as a fecal contamination indicator, since it can be found in only feces of higher animals. Coprostanol concentrations at 8 sampling points exceeded 700 ng L-1 (Australian drinking water standard). Coprostanol has a potential to distinguish the nitrate pollution sources between chemical fertilizer or livestock wastes, since water samples with similar NO3-N + NO2-N concentration showed distinct coprostanol concentration. The sterols ratio (5β/ (5β+5α)) exceeded 0.5 at 18 sampling points. This reveals that fecal pollution has occurred.

  10. Heavy metal pollution status in surface sediments of the coastal Bohai Bay.

    Science.gov (United States)

    Gao, Xuelu; Chen, Chen-Tung Arthur

    2012-04-15

    Bohai Bay, the second largest bay of Bohai Sea, largely due to the huge amount of pollutants discharged into it annually and its geohydrologic condition, is considered to be one of the most polluted marine areas in China. To slow down, halt and finally reverse the environmental deterioration of Bohai Sea, some researchers have proposed to connect it with Jiaozhou Bay in the western coast of Southern Yellow Sea by digging an interbasin canal through Shandong Peninsula. In order to assess the heavy metal pollution and provide background information for such a large geoengineering scheme, surface sediments from 42 stations covering both riverine and marine regions of the northwestern coast of Bohai Bay were analyzed for heavy metal content and fractionation (Cd, Cr, Cu, Ni, Pb and Zn). Three empirically derived sediment quality guidelines were used to assess the pollution extent of these metals. The studied metals had low mobility except for Cd at all stations and Zn at some riverine stations. Although a high mobility of Cd was observed, it could hardly cause a bad effect on the environment owing to its low total concentrations. Anthropogenic influence on the accumulation of studied heavy metals in sediments of Bohai Bay was obvious, but their contents were relatively lower to date comparing with some other marine coastal areas that receive important anthropogenic inputs. Taking as a whole, surface sediments of northwestern Bohai Bay had a 21% probability of toxicity based on the mean effects range-median quotient. Copyright © 2012. Published by Elsevier Ltd.

  11. Influence of ship emission on atmospheric pollutant concentration around Osaka Bay, Japan

    International Nuclear Information System (INIS)

    Kondo, A.; Yamaguchi, K.; Nishikawa, E.

    1999-01-01

    Marine traffic in Osaka Bay is very intensified and much atmosphere pollutant (SO x and NO x ) from ships is released but there is no regulation about the ship emission. In this paper, we investigated the emission amounts of SO x NO x and HC from car, factory and ships in Osaka bay area and estimated the influence of the ship emission on the atmospheric pollutant concentration, using both the meteorological prediction model and the atmospheric pollutant concentration prediction model including the dry deposition and the chemical reaction. In Osaka bay area, the emission amounts of SO x and NO x from ships were about 30% of the total emission amounts, respectively. Using these emission data, the atmospheric pollutant concentration was simulated on a summer fine day when high oxidant concentration was measured at several observatories and was compared with the observed data. Though some differences were seen between the simulated results and the observed data, the diurnal variation agreed reasonably. The second simulation was carried out except for the ship emission and we estimated the influence of the ship emission on the atmospheric pollutant concentration. It was found that the ship emission raised SO 2 , NO 2 and NO concentration not only in shore area but also in 40km inland. (Author)

  12. The Synergic Characteristics of Surface Water Pollution and Sediment Pollution with Heavy Metals in the Haihe River Basin, Northern China

    Directory of Open Access Journals (Sweden)

    Peiru Kong

    2018-01-01

    Full Text Available Aquatic environmental deterioration is becoming a serious problem due to rapid urbanization and economic development, particularly in developing countries. As two important components of the aquatic environment, water quality and sediment pollution are widely considered to be concerns; however, they are considered separately in most cases. The relationship between water quality and sediment pollution with heavy metals has been little addressed. In this study, the Haihe River Basin (HRB, one of the most polluted areas in China, was used as a case study, and the eutrophication index (EI and the potential ecological risk index (RI were employed to evaluate water quality and sediment pollution of heavy metals, respectively. The results showed that generally in the HRB, the water quality was poor, while the risk of heavy metal pollution was relatively low. Surface water quality was mainly influenced by sewage discharges from human daily life, and heavy metal pollution was affected by industry structure, in that the areas with resource/energy consumption industries and high-pollution industries often have high risks of heavy metal pollution Synergic pollution from water eutrophication and sediment pollution with heavy metals was found, especially in the central areas of the HRB, and it was largely dependent on the type of human activities. In the places with intensive human activities, such as secondary industry, eutrophication occurred simultaneously with heavy metal pollution, other than in less human-affected areas. These findings are useful for planning aquatic environment protections and river ecosystem management.

  13. Heavy Metal Pollutants and their Concentrations in Fish (Barbus ...

    African Journals Online (AJOL)

    Les métaux lourds étudiés étaient le cadmium, le chrome, le plomb, le zinc, le cuivre, le manganèse, le calcium, le magnésium. Tous ces métaux ont été détectés dans les tissus de poissons tels que muscles, branchies et foie, au moyen d'un spectrophotomètre d'absorption atomique. La concentration de divers métaux a ...

  14. A study on air pollution concentration at Desa parkcity construction site

    African Journals Online (AJOL)

    This study assesses the effect of construction workers exposure towards the air pollution to the correlation between meteorological factor with the particulate matter and other gases concentration at a construction site in DesaParkcity. The concentration of PM was collected by using low volume sampler meanwhile CO, CO2, ...

  15. Surface sampling concentration and reaction probe

    Science.gov (United States)

    Van Berkel, Gary J; Elnaggar, Mariam S

    2013-07-16

    A method of analyzing a chemical composition of a specimen is described. The method can include providing a probe comprising an outer capillary tube and an inner capillary tube disposed co-axially within the outer capillary tube, where the inner and outer capillary tubes define a solvent capillary and a sampling capillary in fluid communication with one another at a distal end of the probe; contacting a target site on a surface of a specimen with a solvent in fluid communication with the probe; maintaining a plug volume proximate a solvent-specimen interface, wherein the plug volume is in fluid communication with the probe; draining plug sampling fluid from the plug volume through the sampling capillary; and analyzing a chemical composition of the plug sampling fluid with an analytical instrument. A system for performing the method is also described.

  16. Impact of roadside noise barriers on particle size distributions and pollutants concentrations near freeways

    Science.gov (United States)

    Ning, Zhi; Hudda, Neelakshi; Daher, Nancy; Kam, Winnie; Herner, Jorn; Kozawa, Kathleen; Mara, Steven; Sioutas, Constantinos

    2010-08-01

    Increasing epidemiological evidence has established an association between a host of adverse health effects and exposure to ambient particulate matter (PM) and co-pollutants, especially those emitted from motor vehicles. Although PM and their co-pollutants dispersion profiles near the open freeway have been extensively characterized by means of both experimental measurements and numerical simulations in recent years, such investigations near freeways with roadside barriers have not been well documented in the literature. A few previous studies suggested that the presence of roadside structures, such as noise barriers and vegetation, may impact the decay of pollutant concentrations downwind of the freeway by limiting the initial dispersion of traffic emissions and increasing their vertical mixing due to the upward deflection of airflow. Since the noise barriers are now common roadside features of the freeways, particularly those running through populated urban areas, it is pertinent to investigate the impact of their presence on the particles and co-pollutants concentrations in areas adjacent to busy roadways. This study investigated two highly trafficked freeways (I-710 and I-5) in Southern California, with two sampling sites for each freeway, one with and the other without the roadside noise barriers. Particle size distributions and co-pollutants concentrations were measured in the immediate proximity of freeways and at different distances downwind of the freeways. The results showed the formation of a "concentration deficit" zone in the immediate vicinity of the freeway with the presence of roadside noise barrier, followed by a surge of pollutant concentrations further downwind at 80-100 m away from freeway. The particle and co-pollutants concentrations reach background levels at farther distances of 250-400 m compared to 150-200 m at the sites without roadside noise barriers.

  17. Macro-invertebrate decline in surface water polluted with imidacloprid

    NARCIS (Netherlands)

    van Dijk, T.; van Staalduinen, M.A.; van der Sluijs, J.P.

    Imidacloprid is one of the most widely used insecticides in the world. Its concentration in surface water exceeds the water quality norms in many parts of the Netherlands. Several studies have demonstrated harmful effects of this neonicotinoid to a wide range of non-target species. Therefore we

  18. Assessment of heavy metals pollution in sediments and surface ...

    African Journals Online (AJOL)

    Samples were analyzed for their concentrations of these metals, using the atomic absorption spectrophotometer (AAS). The results of heavy metals show that the average contents of Fe (5.3%), Cr (70 ppm), Cd (0.4ppm) and Co (40ppm) in surface sediments are only slightly higher than corresponding contents in body core ...

  19. Riparian shrub buffers reduce surface water pollutant loads

    Science.gov (United States)

    W. A. Geyer; C. Barden; K. Mankin; D. Devlin

    2003-01-01

    Surface water resources in Kansas often contain concentrations of pesticides, nutrients, and sediments that are of concern to local citizens. The United States Geological Survey reported in 1999 that 97 percent of streams and 82 percent of lakes in Kansas would not fully support all uses as designated by state statutes (U.S. Geological Survey 1999). Bacteria and...

  20. Concentrations of pollutants in fogwaters using a Grunow fogwater sampler

    Energy Technology Data Exchange (ETDEWEB)

    Schrimpff, E.; Klemm, O.; Eiden, R.; Frevert, T.; Herrmann, R.

    1984-02-01

    A simple device for sampling fog water is described (modified passive Grunow sampler), and analytical results as were found in rain and fog waters are reported. All samples were taken in the northern part of the Frankenwald mountains (near Bad Steben) from November 1982 until March 1983. Specific conductivity (..mu..Sxcm/sup -1/, 20/sup 0/C), titration acidity, Cl/sup -/, NO/sub 3//sup -/, SO/sub 4//sup 2 -/, total hardness, Ca, Na, Fe, Cd, Pb, TDOC and the polycyclic aromates fluoranthene and 3.4-benzopyrene were continuously higher in fog than in rain water. pH's were remarkably decreased in fog water. Here extreme results were measured in the first two weeks of March with pH 2.5, and acidities proportional2 mequivxl/sup -1/. Possible reasons for such extraordinary concentrations are discussed meteorologically as well as hydrochemically.

  1. Can We Manage Nonpoint-Source Pollution Using Nutrient Concentrations during Seasonal Baseflow?

    Directory of Open Access Journals (Sweden)

    James A. McCarty

    2016-05-01

    Full Text Available Nationwide, a substantial amount of resources has been targeted toward improving water quality, particularly focused on nonpoint-source pollution. This study was conducted to evaluate the relationship between nutrient concentrations observed during baseflow and runoff conditions from 56 sites across five watersheds in Arkansas. Baseflow and stormflow concentrations for each site were summarized using geometric mean and then evaluated for directional association. A significant, positive correlation was found for NO–N, total N, soluble reactive P, and total P, indicating that sites with high baseflow concentrations also had elevated runoff concentrations. Those landscape factors that influence nutrient concentrations in streams also likely result in increased runoff, suggesting that high baseflow concentrations may reflect elevated loads from the watershed. The results highlight that it may be possible to collect water-quality data during baseflow to help define where to target nonpoint-source pollution best management practices within a watershed.

  2. Lung deposited surface area concentrations in a street canyon

    Science.gov (United States)

    Kuuluvainen, Heino; Hietikko, Riina; Järvinen, Anssi; Saukko, Erkka; Irjala, Matti; Niemi, Jarkko V.; Timonen, Hilkka; Keskinen, Jorma; Rönkkö, Topi

    2017-04-01

    Street canyons are interesting environments with respect to the dispersion of traffic emissions and human exposure. Pedestrians may be exposed to relatively high concentrations of fine particles and the vertical dispersion affects the human exposure above the ground level in buildings. Previously, particle concentrations have been measured in street canyons at a few different heights (Marini et al., 2015). The information on the lung deposited surface area (LDSA) concentration, which is a relevant metric for the negative health effects, is very limited even at the ground level of street canyons (Kuuluvainen et al., 2016). More information especially on the vertical dispersion and the ground level concentrations is needed, for instance, for the use of urban planning and the design of ventilation systems in buildings. Measurements were carried out in a busy street canyon in Helsinki, Finland, at an urban super-site measurement station (Mäkelänkatu 50). The data included vertical concentration profiles measured in an intensive measurement campaign with a Partector (Naneos GmbH) installed into a drone, long-term measurements with an AQ Urban particle sensor (Pegasor Ltd.), and an extensive comparison measurement in the field with different devices measuring the LDSA. These devices were an AQ Urban, Partector, DiSCmini (Testo AG), NSAM (TSI Inc.), and an ELPI+ (Dekati Ltd.). In addition, continuous measurements of gas phase components, particle size distributions, and meteorology were run at the supersite. The vertical profile measurements were con-ducted in November 2016 during two days. In the measurements, the drone was flown from the ground level to an altitude of 50 or 100 m, which is clearly above the roof level of the buildings. Altogether, 48 up-and-down flights were conducted during the two days. The vertical profiles were supported by continuous measurements at the ground level on both sides of the street canyon. The long-term measurements were conducted

  3. Prediction of Air Pollutants Concentration Based on an Extreme Learning Machine: The Case of Hong Kong.

    Science.gov (United States)

    Zhang, Jiangshe; Ding, Weifu

    2017-01-24

    With the development of the economy and society all over the world, most metropolitan cities are experiencing elevated concentrations of ground-level air pollutants. It is urgent to predict and evaluate the concentration of air pollutants for some local environmental or health agencies. Feed-forward artificial neural networks have been widely used in the prediction of air pollutants concentration. However, there are some drawbacks, such as the low convergence rate and the local minimum. The extreme learning machine for single hidden layer feed-forward neural networks tends to provide good generalization performance at an extremely fast learning speed. The major sources of air pollutants in Hong Kong are mobile, stationary, and from trans-boundary sources. We propose predicting the concentration of air pollutants by the use of trained extreme learning machines based on the data obtained from eight air quality parameters in two monitoring stations, including Sham Shui Po and Tap Mun in Hong Kong for six years. The experimental results show that our proposed algorithm performs better on the Hong Kong data both quantitatively and qualitatively. Particularly, our algorithm shows better predictive ability, with R 2 increased and root mean square error values decreased respectively.

  4. Prediction of Air Pollutants Concentration Based on an Extreme Learning Machine: The Case of Hong Kong

    Directory of Open Access Journals (Sweden)

    Jiangshe Zhang

    2017-01-01

    Full Text Available With the development of the economy and society all over the world, most metropolitan cities are experiencing elevated concentrations of ground-level air pollutants. It is urgent to predict and evaluate the concentration of air pollutants for some local environmental or health agencies. Feed-forward artificial neural networks have been widely used in the prediction of air pollutants concentration. However, there are some drawbacks, such as the low convergence rate and the local minimum. The extreme learning machine for single hidden layer feed-forward neural networks tends to provide good generalization performance at an extremely fast learning speed. The major sources of air pollutants in Hong Kong are mobile, stationary, and from trans-boundary sources. We propose predicting the concentration of air pollutants by the use of trained extreme learning machines based on the data obtained from eight air quality parameters in two monitoring stations, including Sham Shui Po and Tap Mun in Hong Kong for six years. The experimental results show that our proposed algorithm performs better on the Hong Kong data both quantitatively and qualitatively. Particularly, our algorithm shows better predictive ability, with R 2 increased and root mean square error values decreased respectively.

  5. Monitoring of 1300 organic micro-pollutants in surface waters from Tianjin, North China.

    Science.gov (United States)

    Kong, Lingxiao; Kadokami, Kiwao; Wang, Shaopo; Duong, Hanh Thi; Chau, Hong Thi Cam

    2015-03-01

    In spite of the quantities and species of chemicals dramatically increased with rapid economic growth in China in the last decade, the focus of environmental research was mainly on limited number of priority pollutants. Therefore, to elucidate environmental pollution by organic micro-pollutants, this work was conducted as the first systematic survey on the occurrence of 1300 substances in 20 surface water samples of Tianjin, North China, selected as a representative area of China. The results showed the presence of 227 chemicals. The most relevant compounds in terms of frequency of detection and median concentration were bis(2-ethylhexyl) phthalate (100%; 0.26μgL(-1)), siduron (100%; 0.20μgL(-1)), lidocaine (100%; 96ngL(-1)), antipyrine (100%; 76ngL(-1)), caffeine (95%; 0.28μgL(-1)), cotinine (95%; 0.20μgL(-1)), phenanthrene (95%; 0.17μgL(-1)), metformin (90%; 0.61μgL(-1)), diethyl phthalate (90%; 0.19μgL(-1)), quinoxaline-2-carboxylic acid (90%; 0.14μgL(-1)), 2-(methylthio)-benzothiazole (85%; 0.11μgL(-1)) and anthraquinone (85%; 54ngL(-1)). Cluster analysis discriminated three highly polluted sites from others based on data similarity. Principle component analysis identified four factors, corresponding to industrial wastewater, domestic discharge, tire production and atmospheric deposition, accounting for 78% of the total variance in the water monitoring data set. This work provides a wide reconnaissance on broad spectrum of organic micro-contaminants in surface waters in China, which indicates that the aquatic environment in China has been polluted by a large number of chemicals. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. Concentrations, deposition, and effects of nitrogenous pollutants in selected California ecosystems.

    Science.gov (United States)

    Bytnerowicz, A; Padgett, P E; Parry, S D; Fenn, M E; Arbaugh, M J

    2001-11-28

    Atmospheric deposition of nitrogen (N) in California ecosystems is ecologically significant and highly variable, ranging from about 1 to 45 kg/ha/year. The lowest ambient concentrations and deposition values are found in the eastern and northern parts of the Sierra Nevada Mountains and the highest in parts of the San Bernardino and San Gabriel Mountains that are most exposed to the Los Angeles air pollution plume. In the Sierra Nevada Mountains, N is deposited mostly in precipitation, although dry deposition may also provide substantial amounts of N. On the western slopes of the Sierra Nevada, the majority of airborne N is in reduced forms as ammonia (NH3) and particulate ammonium (NH4+) from agricultural activities in the California Central Valley. In southern California, most of the N air pollution is in oxidized forms as nitrogen oxides (NOx), nitric acid (HNO3), and particulate nitrate (NO3-) resulting from fossil fuel combustion and subsequent complex photochemical reactions. In southern California, dry deposition of gases and particles provides most (up to 95%) of the atmospheric N to forests and other ecosystems. In the mixed-conifer forest zone, elevated deposition of N may initially benefit growth of vegetation, but chronic effects may be expressed as deterioration of forest health and sustainability. HNO3 vapor alone has a potential for toxic effects causing damage of foliar surfaces of pines and oaks. In addition, dry deposition of predominantly HNO3 has lead to changes in vegetation composition and contamination of ground- and stream water where terrestrial N loading is high. Long-term, complex interactions between N deposition and other environmental stresses such as elevated ozone (O3), drought, insect infestations, fire suppression, or intensive land management practices may affect water quality and sustainability of California forests and other ecosystems.

  7. Concentrations, Deposition, and Effects of Nitrogenous Pollutants in Selected California Ecosystems

    Directory of Open Access Journals (Sweden)

    Andrzej Bytnerowicz

    2001-01-01

    Full Text Available Atmospheric deposition of nitrogen (N in California ecosystems is ecologically significant and highly variable, ranging from about 1 to 45 kg/ha/year. The lowest ambient concentrations and deposition values are found in the eastern and northern parts of the Sierra Nevada Mountains and the highest in parts of the San Bernardino and San Gabriel Mountains that are most exposed to the Los Angeles air pollution plume. In the Sierra Nevada Mountains, N is deposited mostly in precipitation, although dry deposition may also provide substantial amounts of N. On the western slopes of the Sierra Nevada, the majority of airborne N is in reduced forms as ammonia (NH3 and particulate ammonium (NH4+ from agricultural activities in the California Central Valley. In southern California, most of the N air pollution is in oxidized forms as nitrogen oxides (NOx, nitric acid (HNO3, and particulate nitrate (NO3– resulting from fossil fuel combustion and subsequent complex photochemical reactions. In southern California, dry deposition of gases and particles provides most (up to 95% of the atmospheric N to forests and other ecosystems. In the mixed-conifer forest zone, elevated deposition of N may initially benefit growth of vegetation, but chronic effects may be expressed as deterioration of forest health and sustainability. HNO3 vapor alone has a potential for toxic effects causing damage of foliar surfaces of pines and oaks. In addition, dry deposition of predominantly HNO3 has lead to changes in vegetation composition and contamination of ground- and stream water where terrestrial N loading is high. Long-term, complex interactions between N deposition and other environmental stresses such as elevated ozone (O3, drought, insect infestations, fire suppression, or intensive land management practices may affect water quality and sustainability of California forests and other ecosystems.

  8. Cadmium, Chromium, and Copper Concentration plus Semen-Quality in Environmental Pollution Site, China.

    Science.gov (United States)

    Li, Yan; Gao, Qiaoyan; Li, Mingcai; Li, Mengyang; Gao, Xueming

    2014-01-01

    The environmental pollution is one of the factors contributing to the decrease of sperm quality for human beings. The aim of this study was to assess cadmium (Cd), chromium (Cr), and copper (Cu) concentration of man in environmental pollution site, and explore relationships between men exposure to Cd, Cr, and Cu and semen-quality parameters in environmental pollution site. Ninety five men were recruited through pollution area and controls in 2011. We measured semen quality using Computer-aided Semen Quality Analysis, and Cd, Cr, and Cu levels in seminal plasma using Graphite Gurnace Atomic Absorption Spectroscopy. Spearman rank correlation analysis was used to evaluate the correlation between Cd, Cr and Cu concentration in seminal plasma and semen quality. The mean of seminal plasma Cd, Cr, and Cu values in pollution area was higher than the controls. Seminal plasma Cr values displayed a significant negative correlation with total motility and normomorph sperm rate. Seminal plasma Cu values also displayed a negative correlation with normomorph sperm rate. Male reproductive health may be threatened by environmental pollution, and it may be influence local population diathesis.

  9. Tracing nitrate pollution sources and transformation in surface- and ground-waters using environmental isotopes

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yan [Key Laboratory of Ecosystem Network Observation and Modeling, Institute of Geographic Sciences and Natural Resources Research, Chinese Academy of Sciences, Beijing 100101 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Li, Fadong, E-mail: lifadong@igsnrr.ac.cn [Key Laboratory of Ecosystem Network Observation and Modeling, Institute of Geographic Sciences and Natural Resources Research, Chinese Academy of Sciences, Beijing 100101 (China); Zhang, Qiuying [Center for Agricultural Resources Research, Chinese Academy of Sciences, Shijiazhuang 050021 (China); Li, Jing [Key Laboratory of Ecosystem Network Observation and Modeling, Institute of Geographic Sciences and Natural Resources Research, Chinese Academy of Sciences, Beijing 100101 (China); Liu, Qiang [Key Laboratory of Ecosystem Network Observation and Modeling, Institute of Geographic Sciences and Natural Resources Research, Chinese Academy of Sciences, Beijing 100101 (China); University of Chinese Academy of Sciences, Beijing 100049 (China)

    2014-08-15

    Water pollution in the form of nitrate nitrogen (NO{sub 3}{sup −}–N) contamination is a major concern in most agricultural areas in the world. Concentrations and nitrogen and oxygen isotopic compositions of nitrate, as well as oxygen and deuterium isotopic compositions of surface and groundwater from a typical irrigated region in the North China Plain (NCP) collected from May to October in 2012 were analyzed to examine the major nitrate sources and transformations. Concentrations of NO{sub 3}{sup −}–N ranged from 0.2 to 29.6 mg/L (mean of 11.2 mg/L) in surface water, and from 0.1 to 19.4 mg/L (mean of 2.8 mg/L) in groundwater. Approximately 46.7% of the surface water samples and 10% of the groundwater samples exceeded the World Health Organization (WHO) drinking water standard for NO{sub 3}{sup −}–N. Surface water samples that exceeded the standard were collected mainly in the dry season (May and October), while groundwater samples that exceeded the standard were collected in the wet season (June). Overall, the highest nitrate levels were observed in surface water in May and in groundwater in June, indicating that fertilizer application, precipitation, and irrigation strongly influence the NO{sub 3}{sup −}–N concentrations. Analyses of isotopic compositions suggest that the main sources of nitrate are nitrification of fertilizer and sewage in surface water, in contrast, mineralization of soil organic N and sewage is the groundwater sources during the dry season. When fertilizers are applied, nitrate will be transported by precipitation through the soil layers to the groundwater in the wet season (June). Denitrification only occurred in surface water in the wet season. Attempts should be made to minimize overuse of nitrogen fertilizers and to improve nitrogen use efficiency in irrigated agricultural regions. - Highlights: • Nitrate sources in surface and groundwater were identified by multiple isotopes. • Nitrate pollution displayed obvious

  10. Innovative eco-friendly bio- solvent for combating sea surface and sedimented oil pollution

    Science.gov (United States)

    Theodorou, Paraskevas

    2017-04-01

    The combating of oil spill at sea surface by chemical dispersants accelerates the evaporation and disperse the oil into the water column, where it is broken down by natural processes and/or is sedimented at the sea bottom, especially at near coastal shallow areas, ports and marinas. The usual methodology for cleaning the sedimented oil from the sea bottom is mainly carried out via excavation and dumping of the polluted sediment into deeper sea areas, where the contamination is transferred from one area to another. The eco-friendly bio-solvent MSL Aqua 250 is an innovative new solution based mainly on natural constituents. The action mechanism and the effectiveness of this eco-friendly solvent is based on the high surface tension process. Organic compounds, including hydrocarbons upon coming in contact with MSL Aqua 250 solvent generate a significant surface tension reaction, which is able to alter the organic compounds to liquid form and then to drastically evaporate it. The use of MSL Aqua 250 solvent, both at sea surface and at the bottom, has the following advantages compared to the dispersants: • Efficient solution without transferring the pollution from sea surface to the water column and to the bottom or disturbing the Aquatic Eco System. • Non-Toxic. • Environmentally friendly with a restoration of marine life in the Eco System. • Cost effective. The MSL Aqua 250 solvent has been tested in cooperation with the Cyprus Department of Fisheries and Marine Research and the Technological University of Cyprus and used during the years 2015 and 2016 in marinas and fishing shelters in Cyprus faced oil pollution, with high concentration in the sea water and at the sea bottom of chemical parameters (BOD5, COD, FOG, TKN, TP, TPH), with excellent results.

  11. Cr(VI) and Conductivity as Indicators of Surface Water Pollution from Ferrochrome Production in South Africa: Four Case Studies

    Science.gov (United States)

    Loock-Hattingh, M. M.; Beukes, J. P.; van Zyl, P. G.; Tiedt, L. R.

    2015-10-01

    South Africa is one of the largest ferrochromium (FeCr) producers. Most FeCr is exported to developed countries. Therefore the impact of this industry is of national and international importance. Cr(VI) and conductivity of surface water in four case study areas, near five FeCr smelters were monitored for approximately 1 year. Results indicated that FeCr production in three case study areas had a negative influence on the Cr(VI) concentration and/or the conductivity of surface waters. In the remaining case study areas, drinking water, originating from groundwater, was severely polluted with Cr(VI). The main factors causing pollution were surface run-off and/or seepage, while atmospheric deposition did not seem to contribute significantly. The extinction of diatoms during a severe Cr(VI) surface water pollution event (concentrations up to 216 µg/L) in one of the case study areas was also observed, which clearly indicates the ecological impact of such surface water pollution events.

  12. Natural variability in the surface ocean carbonate ion concentration

    OpenAIRE

    N. S. Lovenduski; M. C. Long; K. Lindsay

    2015-01-01

    We investigate variability in the surface ocean carbonate ion concentration ([CO32−]) on the basis of a long control simulation with a fully-coupled Earth System Model. The simulation is run with a prescribed, pre-industrial atmospheric CO2 concentration for 1000 years, permitting investigation of natural [CO32−] variability on interannual to multi-decadal timescales. We find high interannual variability in surface [CO32−] in the tropical...

  13. Natural variability in the surface ocean carbonate ion concentration

    OpenAIRE

    Lovenduski, N. S.; Long, M. C.; Lindsay, K.

    2015-01-01

    We investigate variability in the surface ocean carbonate ion concentration ([CO32−]) on the basis of a~long control simulation with an Earth System Model. The simulation is run with a prescribed, pre-industrial atmospheric CO2 concentration for 1000 years, permitting investigation of natural [CO32−] variability on interannual to multi-decadal timescales. We find high interannual variability in surface [CO32−] in the tropical Pacific and ...

  14. Biomonitoring urban air pollution using transplanted lichens: element concentrations across seasons.

    Science.gov (United States)

    Malaspina, Paola; Tixi, Sara; Brunialti, Giorgio; Frati, Luisa; Paoli, Luca; Giordani, Paolo; Modenesi, Paolo; Loppi, Stefano

    2014-11-01

    We investigated the bioaccumulation of selected trace elements in samples of the lichen Evernia prunastri (L.) Ach. transplanted across two seasons in the urban area of Genoa (NW Italy), which is heavily affected by traffic and industrial pollution. Total concentration of most elements did not exhibit differences between seasons, exceptions being Al and Na, higher in summer, and As, Cd, and Ti, higher in winter. Differences emerged in the initial concentrations of some elements in control samples, and this was accounted for by the use of exposed-to-control (EC) ratios, which allowed interpretation of changes in element concentrations. The study area resulted highly polluted, likely by particulate matter, as suggested also by the higher concentrations of airborne PM10 during winter months. Bioaccumulation of particulate matter seems to be affected by differences in rainfall regimes across seasons, since element solubilization and leaching due to precipitation may vary considerably.

  15. Estimation of surface area concentration of workplace incidental nanoparticles based on number and mass concentrations

    Science.gov (United States)

    Park, J. Y.; Ramachandran, G.; Raynor, P. C.; Kim, S. W.

    2011-10-01

    Surface area was estimated by three different methods using number and/or mass concentrations obtained from either two or three instruments that are commonly used in the field. The estimated surface area concentrations were compared with reference surface area concentrations (SAREF) calculated from the particle size distributions obtained from a scanning mobility particle sizer and an optical particle counter (OPC). The first estimation method (SAPSD) used particle size distribution measured by a condensation particle counter (CPC) and an OPC. The second method (SAINV1) used an inversion routine based on PM1.0, PM2.5, and number concentrations to reconstruct assumed lognormal size distributions by minimizing the difference between measurements and calculated values. The third method (SAINV2) utilized a simpler inversion method that used PM1.0 and number concentrations to construct a lognormal size distribution with an assumed value of geometric standard deviation. All estimated surface area concentrations were calculated from the reconstructed size distributions. These methods were evaluated using particle measurements obtained in a restaurant, an aluminum die-casting factory, and a diesel engine laboratory. SAPSD was 0.7-1.8 times higher and SAINV1 and SAINV2 were 2.2-8 times higher than SAREF in the restaurant and diesel engine laboratory. In the die casting facility, all estimated surface area concentrations were lower than SAREF. However, the estimated surface area concentration using all three methods had qualitatively similar exposure trends and rankings to those using SAREF within a workplace. This study suggests that surface area concentration estimation based on particle size distribution (SAPSD) is a more accurate and convenient method to estimate surface area concentrations than estimation methods using inversion routines and may be feasible to use for classifying exposure groups and identifying exposure trends.

  16. Estimation of surface area concentration of workplace incidental nanoparticles based on number and mass concentrations

    International Nuclear Information System (INIS)

    Park, J. Y.; Ramachandran, G.; Raynor, P. C.; Kim, S. W.

    2011-01-01

    Surface area was estimated by three different methods using number and/or mass concentrations obtained from either two or three instruments that are commonly used in the field. The estimated surface area concentrations were compared with reference surface area concentrations (SA REF ) calculated from the particle size distributions obtained from a scanning mobility particle sizer and an optical particle counter (OPC). The first estimation method (SA PSD ) used particle size distribution measured by a condensation particle counter (CPC) and an OPC. The second method (SA INV1 ) used an inversion routine based on PM1.0, PM2.5, and number concentrations to reconstruct assumed lognormal size distributions by minimizing the difference between measurements and calculated values. The third method (SA INV2 ) utilized a simpler inversion method that used PM1.0 and number concentrations to construct a lognormal size distribution with an assumed value of geometric standard deviation. All estimated surface area concentrations were calculated from the reconstructed size distributions. These methods were evaluated using particle measurements obtained in a restaurant, an aluminum die-casting factory, and a diesel engine laboratory. SA PSD was 0.7–1.8 times higher and SA INV1 and SA INV2 were 2.2–8 times higher than SA REF in the restaurant and diesel engine laboratory. In the die casting facility, all estimated surface area concentrations were lower than SA REF . However, the estimated surface area concentration using all three methods had qualitatively similar exposure trends and rankings to those using SA REF within a workplace. This study suggests that surface area concentration estimation based on particle size distribution (SA PSD ) is a more accurate and convenient method to estimate surface area concentrations than estimation methods using inversion routines and may be feasible to use for classifying exposure groups and identifying exposure trends.

  17. Evaluation of Relationship Between Air Pollutant Concentration and Meteorological Elements in Winter Months

    Directory of Open Access Journals (Sweden)

    Żyromski Andrzej

    2014-10-01

    Full Text Available The paper presents the evaluation of the relation between meteorological elements and air pollutants’ concentrations. The analysis includes daily concentrations of pollutants and variation of meteorological elements such as wind speed, air temperature and relative humidity, precipitation and total radiation at four monitoring stations located in the province of Lower Silesia in individual months of the winter half-year (November–April, according to hydrological year classification of 2005–2009. Data on air quality and meteorological elements came from the results of research conducted in the automatic net of air pollution monitoring conducted in the range of the State Environment Monitoring. The effect of meteorological elements on analysed pollutant concentration was determined using the correlation and regression analysis at significance level α < 0.05. The occurrence of maximum concentration of NO, NO2, NOX, SO2 and PM10 occurred in the coldest months during winter season (January, February and December confirmed the strong influence of “low emission” on air quality. Among the meteorological factors assessed wind speed was most often selected component in step wise regression procedure, then air temperature, less air relative humidity and solar radiation. In the case of a larger number of variables describing the pollution in the atmosphere, in all analyzed winter seasons the most common set of meteorological elements were wind speed and air temperature.

  18. Ambient concentrations of aldehydes in relation to Beijing Olympic air pollution control measures

    Science.gov (United States)

    Gong, J. C.; Zhu, T.; Hu, M.; Zhang, L. W.; Cheng, H.; Zhang, L.; Tong, J.; Zhang, J.

    2010-08-01

    Aldehydes are ubiquitous constituents of the atmosphere. Their concentrations are elevated in polluted urban atmospheres. The present study was carried out to characterize three aldehydes of most health concern (formaldehyde, acetaldehyde, and acrolein) in a central Beijing site in the summer and early fall of 2008 (from June to October). Measurements were made before, during, and after the Beijing Olympics to examine whether the air pollution control measures implemented to improve Beijing's air quality during the Olympics had any impact on concentrations of the three aldehydes. Average concentrations of formaldehyde, acetaldehyde and acrolein were 29.34 ± 15.12 μg/m3, 27.09 ± 15.74 μg/m3 and 2.32 ± 0.95 μg/m3, respectively, for the entire period of measurements, all being the highest among the levels measured in cities around the world in photochemical smog seasons. Among the three measured aldehydes, only acetaldehyde had a substantially reduced mean concentration during the Olympic air pollution control period compared to the pre-Olympic period. Formaldehyde and acrolein followed the changing pattern of temperature and were each significantly correlated with ozone (a secondary product of photochemical reactions). In contrast, acetaldehyde was significantly correlated with several pollutants emitted mainly from local emission sources (e.g., NO2, CO, and PM2.5). These findings suggest that local direct emissions had a larger impact on acetaldehyde than formaldehyde and acrolein.

  19. Reduction of the environmental concentration of air pollutants by proper geometrical orientation of industrial line sources

    International Nuclear Information System (INIS)

    Tadmor, J.

    1980-01-01

    An account is given of an Israeli study of two line sources, one composed of 10 and the other of 20 individual sources. The height of release ranged from 15.7 to 39.6 m, with a uniform rate of release of a gaseous pollutant of 1 Ci/s for each source. Average pollutant concentration was plotted as a function of the rotation angle of the line sources. Reduction of pollutant concentration by a particular rotation of the line sources attained values of up to 50%. At certain rotation angles of the line sources, the environmental concentration was lower even as compared with a single high source. Results also depended on atmospheric conditions. It is suggested that considering the increase in cost of augmenting the height of release as a means of reducing the air pollutant concentration, determination of the optimum geometric orientation of the line sources should be considered as an economical means of improving environmental air quality. (U.K.)

  20. Correcting air pollution time series for meteorological variability. With an application to regional PM10 concentrations

    NARCIS (Netherlands)

    Visser H; Noordijk H; CIM; LLO

    2003-01-01

    It is well-known that a large part of the year-to-year variation in annual distribution of daily concentrations of air pollutants is due to fluctuations in the frequency and severity of meteorological conditions. This variability makes it difficult to estimate the effectiveness of emission control

  1. A study of the concentration of certain inorganic air pollutants in the city of Elefsis

    International Nuclear Information System (INIS)

    Katselis, V.; Paradellis, T.

    1981-11-01

    The airborne concentration of Ca, Fe, Zn, Mn, Pb and Br pollutants has been measured in the city of Elefsis during 1977. The results obtained are compared with data obtained during 1975 in the same site, as well as with data obtained from the site of the NRC Democritus during 1977. (author)

  2. 76 FR 65431 - National Pollutant Discharge Elimination System (NPDES) Concentrated Animal Feeding Operation...

    Science.gov (United States)

    2011-10-21

    .... Environmental and Human Health Impacts of CAFOs Despite more than 35 years of regulating CAFOs, reports of water... impairment. U.S. EPA, National Water Quality Inventory: Report to Congress--2004 Reporting Cycle, January... important contributor of surface water pollution. For example, the GAO found in its 2008 Report to...

  3. The Assessment of Air Pollutant Concentrations and Air Quality Index in Shiraz during 2011-2013

    Directory of Open Access Journals (Sweden)

    Monireh Majlesi Nasr

    2016-06-01

    Full Text Available Background: Exposure to air pollutants can cause many problems, including the health effects in humans and animals. The aim of this study was to assay the air quality in the Shiraz city during 2011-2013. Methods: In this descriptive-analytical study, the air pollutant data during the study period were taken from Air Quality Co. for two main stations i.e. Darvazeh Kazeroun and Imam Hossein and then were analysed to determine air quality index. Results: The maximum (0.018 ppm and minimum (0.015 ppm annual concentration of SO2 were determined in 2011 and 2013, respectively. The maximum NO2 concentration was measured in summer 2011 with a value of 0.025 ppm. Regarding ozone, the highest average concentration was measured in the summer season of 2013 with the concentration of 0.068 ppm. In terms of air quality, the worst situation was experienced in 2011, which about 31 percent of the days have been marked as unhealthy, but during the last years of the study, the air quality get better. Conclusion: In general, the results of the study showed that SO2 concentration has been decreased during recent years due to strengthen of air pollution regulation but NO2 concentration was increased because the number of gas fuel automobile was also increased. With regard to air quality, it has an improving trend during the study period.

  4. Surface water pollution and water quality studies at Prestea Goldfields Limited (P. G. L.) Prestea, Ghana

    International Nuclear Information System (INIS)

    Ampong, Charles Horace

    1993-11-01

    Prestea is a mining community developed around Prestea Goldfields Limited, which is engaged in mining Sulphide gold ores known to give rise to several environmental problems like air pollution in the form of emissions of arsenic or arsenous oxides, with concurrent production of large amounts of Sulphur dioxide. As a result of extensive mining since 1929 using underground methods, involving about 18 million tons of ore, an estimated 3.5 - 4 million tons of tailings have been left on the surface in the vicinity of both current and historic treatment sites. Since the mine is located in an area of heavy rainfall, incessant rain will flush contaminants from tailings dumps and waste sites into the downstream environment and subsequently into surface waters. Water supply for the population in the area is derived from rivers and streams flowing in the area, supplemented by boreholes and spring water. Not much is known with respect to pollution levels along the rivers and streams which serve as water for domestic uses by settlers along these river banks and around. It therefore became necessary to carry out studies to ascertain the pollution levels of various water resources and to make some suggestions to guide pollution of these waters and uses of them as well. Water sampling was carried out in the rivers and streams. A spring water and well water were also sampled as reference data to ascertain background levels of pollutants. The work highlights activities of the mine and that of the surrounding inhabitants which are likely to result in the pollution of surface waters. It also discusses results of water samples within the area, Sample analysis included determination of parameters like pH, Temperature, Conductivity, Alkalinity, Total Dissolved Solids (TDS), Total Suspended Solids (TSS), Total Solids (TS), Total hardness, Cyanide and Sulphate concentrations among others. Concentrations of some heavy metals were also determined. Based on standards prevailing in the country

  5. Measuring concentrations of selected air pollutants inside California vehicles. Final report

    International Nuclear Information System (INIS)

    Rodes, C.; Sheldon, L.; Whitaker, D.; Clayton, A.; Fitzgerald, K.

    1999-01-01

    This project measured 2-hour integrated concentrations of PM10, PM2.5, metals and a number of organic chemicals including benzene and MTBE inside vehicles on California roadways. Using continuous samplers, particle counts, black carbon, and CO were also measured. In addition to measuring in-vehicle levels, the investigators measured pollutant levels just outside the vehicle, at roadside stations, and ambient air monitoring stations. Different driving scenarios were designed to assess the effects of a number of factors on in-vehicle pollutant levels. These factors included roadway type, carpool lanes, traffic conditions, geographical locations, vehicle type, and vehicle ventilation conditions. The statewide average in-vehicle concentrations of benzene, MTBE, and formaldehyde ranged from 3--22 microg/m 3 , 3--90 microg/m 3 , and 0---22 microg/m 3 , respectively. The ranges of mean PM10 and PM2.5 in-vehicle levels in Sacramento were 20--40 microg/m 3 and 6--22 microg/m 3 , respectively. In general, pollutant levels inside or just outside the vehicles were higher than those measured at the roadside stations or the ambient air stations. In-vehicle pollutant levels were consistently higher in Los Angeles than Sacramento. Pollutant levels measured inside vehicles traveling in a carpool lane were much lower than those in the right-hand, slower lanes. Under the study conditions, factors such as vehicle type and ventilation and little effect on in-vehicle pollutant levels. Other factors, such as roadway type, freeway congestion level, and time-of-day had some influence on in-vehicle pollution levels

  6. Time-series forecasting of pollutant concentration levels using particle swarm optimization and artificial neural networks

    Directory of Open Access Journals (Sweden)

    Francisco S. de Albuquerque Filho

    2013-01-01

    Full Text Available This study evaluates the application of an intelligent hybrid system for time-series forecasting of atmospheric pollutant concentration levels. The proposed method consists of an artificial neural network combined with a particle swarm optimization algorithm. The method not only searches relevant time lags for the correct characterization of the time series, but also determines the best neural network architecture. An experimental analysis is performed using four real time series and the results are shown in terms of six performance measures. The experimental results demonstrate that the proposed methodology achieves a fair prediction of the presented pollutant time series by using compact networks.

  7. Sources and levels of concentration of metal pollutants in Kubanni dam, Zaria, Nigeria

    Directory of Open Access Journals (Sweden)

    Butu, A.W.

    2013-06-01

    Full Text Available The paper looked at the sources and levels of concentration of metal pollutants in Kubanni dam, Zaria, Nigeria. The main sources of data for the study were sediment from four different sections of the long profile of the dam. The samples were prepared in the laboratory according to standard methods and the instrumental Neutron Activation Analysis (INAA technique was adopted in the analysis using Nigeria Research Reactor – 1 (NIRR – 1. The results of the analysis showed that 29 metal pollutants; Mg, Al, Ca, Ti, V, Mn, Dy, Na, K, As, La, Sm, Yb, U, Br, Sc, Cr, Fe, Co, Rb, Zn,Cs, Ba, Eu, Lu, Hf, Ta, Sb and Th currently exist in Kubanni dam in various levels of concentrations. The results showed that most of the metal pollutants in the dam are routed to anthropogenic activities within the dam catchment area while few are routed to geologic formation. The results further revealed that metal pollutants that their sources are traceable to refuse dumps, farmlands, public drains and effluents showed higher levels of concentration in the dam than the ones that are gradually released from the soil regolith system.

  8. Spatial and temporal variability of surface water pollution in the Mekong Delta, Vietnam.

    Science.gov (United States)

    Wilbers, Gert-Jan; Becker, Mathias; Nga, La Thi; Sebesvari, Zita; Renaud, Fabrice G

    2014-07-01

    Surface water pollution in the Vietnamese Mekong Delta (MD) could threaten human, animal and ecosystem health given the fact that this water source is intensively used for drinking, irrigation and domestic services. We therefore determined the levels of pollution by organic pollutants, salts, metals and microbial indicators by (bi)monthly monitoring of canals between November 2011 and July 2012 at 32 sampling locations, representing fresh and saline/brackish environments. The results were compared with national water quality guidelines, between the studied regions and with water quality data from main waterways. Key factors explaining the observed levels of pollution in surface water were identified through principal component analysis (PCA). Temporal variations due to tidal regime and seasonality were also assessed. Based on regression models, the spatial variability of five water quality parameters was visualized using GIS based maps. Results indicate that pH (max. 8.6), turbidity (max. 461 FTU), maximum concentrations of ammonium (14.7 mg L(-1)), arsenic (44.1 μg L(-1)), barium (157.5 μg L(-1)), chromium (84.7 μg L(-1)), mercury (45.5 μg L(-1)), manganese (1659.7 μg L(-1)), aluminum (14.5 mg L(-1)), iron (17.0 mg L(-1)) and the number of Escherichia coli (87,000 CFU 100 mL(-1)) and total coliforms (2,500,000 CFU 100 mL(-1)) in canals exceed the thresholds set by Vietnamese quality guidelines for drinking and domestic purposes. The PCA showed that i) urbanization; ii) metal leaching from soils; iii) aquaculture; and iv) tidal regime explain 85% of the variance of surface water quality attributes. Significant differences in water quality were found due to daily tidal regime and as a result of seasonality. Surface water quality maps for dissolved oxygen, ammonium, ortho-phosphate, manganese and total coliforms were developed to highlight hot-spot areas of pollution. The results of this study can assist policy makers in developing water management strategies

  9. [Pollution Characteristics of Surface Runoff of Typical Town in Chongqing City].

    Science.gov (United States)

    Wang, Long-tao; Duan, Bing-zheng; Zhao, Jian-wei; Hua, Yu-mei; Zhu, Duan-wei

    2015-08-01

    Six kinds of impermeable underlying surface, cement tile roof, asbestos roof, cement flat roof, residential concrete pavement, asphalt pavement of restaurants, asphalt pavement of oil depot, and a combined sewer overflow canal in the Jiansheng town of Dadukou district in Chongqing city were chosen as sample plots to study the characteristics of nutritional pollutants and heavy metals in town runoff. The research showed that the average mass concentrations of TSS, COD, TN, TP in road runoff were (1681.2 +/- 677.2), (1154.7 +/- 415.5), (12.07 +/- 2.72), (3.32 +/- 1.15) mgL(-1), respectively. These pollutants were higher than those in roof runoff which were (13.3 +/- 6.5), (100.4 +/- 24.8), (3.58 +/- 0.70), (0.10 +/- 0.02) mg x L(-1), respectively. TDN accounted for 62.60% +/- 34.38% of TN, and TDP accounted for 42.22% +/- 33.94% of TP in the runoff of impermeable underlying surface. Compared with the central urban runoff, town runoff in our study had higher mass concentrations of these pollutants. The mass concentrations of TSS, COD, TDN, TN, TDP and TP in the combined sewer overflow were (281.57 +/- 308.38), (231.21 +/- 42.95), (8.16 +/- 2.78), (10.60 +/- 3.94), (0.38 +/- 0.23) and (1.51 +/- 0.75) mg x L(-1), respectively. The average levels of heavy metals in this kind of runoff did not exceed the class VI level of the surface water environmental quality standard. Most pollutants in the combined sewer overflow had first flush. However, this phenomenon was very rare for TSS. There was a significant positive correlation between TSS and COD, TP in the combined sewer overflow. And this correlation was significant between NH4+ -N and TP, TDP, TN, TDP. However, a negative correlation existed between NO3- -N and all other indicators.

  10. Efficiency of a concentric matrix track detector surface scanning

    International Nuclear Information System (INIS)

    Bek-Uzarov, Dj.; Nikezic, D.; Kostic, D.; Krstic, D.; Cuknic, O.

    1995-01-01

    Heavy particle ionizing radiation track counting on the surface of a solid state round surface detector is made using the microscope and scanning step by step by a round field of vision. The whole solid state detector surface could not be fully or completely covered by round fields of visions. Therefore detector surface could be divided on the two parts, the larger surface, being under fields of vision, really scanned and no scanned missed or omitted surface. The ratio between omitted and scanned surfaces is so called track scanning efficiency. The knowledge of really counted, or scanned surface is a important value for evaluating the real surface track density an exposed solid state track detector. In the paper a matrix of a concentric field of vision made around the first microscope field of vision placed in center of the round disc of the scanned track detector is proposed. In a such scanning matrix the real scanned surface could be easy calculated and by the microscope scanning made as well. By this way scanned surface is very precisely obtained as well. Precise knowledge of scanned and omitted surface allows to obtain more precise scanning efficiency factor as well as real surface track density, the main parameter in solid state track detection measurements. (author)

  11. Measurements and predictors of on-road ultrafine particle concentrations and associated pollutants in Los Angeles

    Science.gov (United States)

    Fruin, S.; Westerdahl, D.; Sax, T.; Sioutas, C.; Fine, P. M.

    Motor vehicles are the dominant source of oxides of nitrogen (NO x), particulate matter (PM), and certain air toxics (e.g., benzene, 1,3-butadiene) in urban areas. On roadways, motor vehicle-related pollutant concentrations are typically many times higher than ambient concentrations. Due to high air exchange rates typical of moving vehicles, this makes time spent in vehicles on roadways a major source of exposure. This paper presents on-road measurements for Los Angeles freeways and arterial roads taken from a zero-emission electric vehicle outfitted with real-time instruments. The objective was to characterize air pollutant concentrations on roadways and identify the factors associated with the highest concentrations. Our analysis demonstrated that on freeways, concentrations of ultrafine particles (UFPs), black carbon, nitric oxide, and PM-bound polycyclic aromatic hydrocarbons (PM-PAH) are generated primarily by diesel-powered vehicles, despite the relatively low fraction (˜6%) of diesel-powered vehicles on Los Angeles freeways. However, UFP concentrations on arterial roads appeared to be driven primarily by proximity to gasoline-powered vehicles undergoing hard accelerations. Concentrations were roughly one-third of those on freeways. By using a multiple regression model for the freeway measurements, we were able to explain 60-70% of the variability in concentrations of UFP, black carbon, nitric oxide, and PM-PAH using measures of diesel truck density and hour of day (as an indicator of wind speed). Freeway concentrations of these pollutants were also well correlated with readily available annual average daily truck counts, potentially allowing improved population exposure estimates for epidemiology studies. Based on these roadway measurements and average driving time, it appears that 33-45% of total UFP exposure for Los Angeles residents occurs due to time spent traveling in vehicles.

  12. Measurements and predictors of on-road ultrafine particle concentrations and associated pollutants in Los Angeles

    International Nuclear Information System (INIS)

    Fruin, S.; Sioutas, C.

    2008-01-01

    Motor vehicles are the dominant source of oxides of nitrogen (NO x ), particulate matter(PM), and certain air toxics (e.g., benzene, 1,3-butadiene) in urban areas. On roadways, motor vehicle-related pollutant concentrations are typically many times higher than ambient concentrations. Due to high air exchange rates typical of moving vehicles, this makes time spent in vehicles on roadways a major source of exposure. This paper presents on-road measurements for Los Angeles freeways and arterial roads taken from a zero-emission electric vehicle outfitted with real-time instruments. The objective was to characterize air pollutant concentrations on roadways and identify the factors associated with the highest concentrations. Our analysis demonstrated that on freeways, concentrations of ultrafine particles (UFPs), black carbon, nitric oxide, and PM-bound polycyclic aromatic hydrocarbons (PM-PAH) are generated primarily by diesel-powered vehicles, despite the relatively low fraction (∼6%) of diesel-powered vehicles on Los Angeles freeways. However, UFP concentrations on arterial roads appeared to be driven primarily by proximity to gasoline-powered vehicles undergoing hard accelerations. Concentrations were roughly one-third of those on freeways. By using a multiple regression model for the freeway measurements, we were able to explain 60-70% of the variability in concentrations of UFP, black carbon, nitric oxide, and PM-PAH using measures of diesel truck density and hour of day (as an indicator of wind speed). Freeway concentrations of these pollutants were also well correlated wth readily available annual average daily truck counts, potentially allowing improved population exposure estimates for epidemiology studies. Based on these roadway measurements and average driving time, it appears that 33-45% of total UFP exposure for Los Angeles residents occurs due to time spent traveling in vehicles. (author)

  13. SPECIATION OF HEAVY METALS IN SURFACE WATERS POLLUTED BY ANTHROPOGENIC ACTIVITIES

    Directory of Open Access Journals (Sweden)

    Constantin Luca

    2010-12-01

    Full Text Available In this work we present the results of a methodological research on the chemical speciation of heavy metals found in surface waters of an area polluted by mining activities (in the Western Carpathians. The surface water samples were collected in two seasons (summer and fall. Each time were performed in situ physical-chemical measurements (pH, Eh, conductivity, temperature and analytical determination of total concentrations of some metals (manganese, copper, zinc, iron, cadmium and anions (SO42-, Cl-, PO43-, NO3-. Analyze of chemical speciation of these metals was made using the PHREEQC program which allowed us to determine the distribution of studied elements. The concordance of the results obtained with this program with thermodynamic predictions arising from potential - pH equilibrium diagrams - Pourbaix type justify the compatibility between the program calculation and experimental data.

  14. Retrieval of surface temperature by remote sensing. [of earth surface using brightness temperature of air pollutants

    Science.gov (United States)

    Gupta, S. K.; Tiwari, S. N.

    1976-01-01

    A simple procedure and computer program were developed for retrieving the surface temperature from the measurement of upwelling infrared radiance in a single spectral region in the atmosphere. The program evaluates the total upwelling radiance at any altitude in the region of the CO fundamental band (2070-2220 1/cm) for several values of surface temperature. Actual surface temperature is inferred by interpolation of the measured upwelling radiance between the computed values of radiance for the same altitude. Sensitivity calculations were made to determine the effect of uncertainty in various surface, atmospheric and experimental parameters on the inferred value of surface temperature. It is found that the uncertainties in water vapor concentration and surface emittance are the most important factors affecting the accuracy of the inferred value of surface temperature.

  15. Variations of surface ozone concentration across the Klang Valley, Malaysia

    Science.gov (United States)

    Latif, Mohd Talib; Huey, Lim Shun; Juneng, Liew

    2012-12-01

    Hourly air quality data covering the period 2004-2008 was obtained from the Air Quality Division, the Department of Environment (DOE) through long-term monitoring by Alam Sekitar Sdn. Bhd. (ASMA) were analysed to investigate the variations of surface ozone (O3) in the Klang Valley, Malaysia. A total of nine monitoring stations were selected for analysis in this study and the results show that there are distinct seasonal patterns in the surface O3 across the Klang Valley. A high surface O3 concentration is usually observed between January and April, while a low surface O3 concentration is found between June and August. Analysis of daily variations in surface O3 and the precursors - NO, NO2, CO, NMHC and UVb, indicate that the surface O3 photochemistry in this study area exhibits a positive response to the intensity and wavelength in UVb while being influenced by the concentration of NOx, particularly through tritration processes. Although results from our study suggested that NMHCs may influence the maximum O3 concentration, further investigation is required. Wind direction during different monsoons was found to influence the concentration of O3 around the Klang Valley. HYSPLIT back trajectories (-72 h) were used to indicate the air-mass transport patterns on days with high concentrations of surface O3 in the study area. Results show that 47% of the high O3 days was associated with the localized circulation. The remaining 32% and 22% were associated with mid-range and long-range transport across the South China Sea from the northeast.

  16. Heavy metal pollution of surface soil in Thrace region (Turkey)

    International Nuclear Information System (INIS)

    Goskun, Mahmut; Goskun, Munevver; Steinnes, E.; Eidhammer Sjobakk, T.; Frontas'eva, M.V.; Demkina, S.V.

    2004-01-01

    Samples of surface soil were collected at 73 sites in the Thrace region, northwest part of Turkey. Two complementary analytical techniques, epithermal neutron activation analysis (ENAA) and atomic absorption spectrometry (AAS) with flame and graphite furnace atomization were used to determine 37 elements in the soil samples. Concentrations of Cu, Zn, Ni, Cd, Mn, Co, Pb, and As were determined using AAS and GF AAS and ENAA was used for the remaining 29 elements. Results for As, Ba, Br, Ca, Cd, Ce, Cr, Cs, Eu, Fe, Hf, I, In, K, La, Mn, Na, Nd, Rb, Sb, Sc, Sm, Sr, Ta, Tb, Th, Ti, U, and V are reported for the first time for soils from this region. The results show that concentrations of the most elements were little affected by the industrial and other anthropogenic activities performed in the region. Except for distinctly higher levels of Pb, Cu, Cd, and Zn in Istanbul district than the median values for the Thrace region, the observed distributions seem to be mainly associated with lithogenic variations. Spatial distributions of Cu, Zn, Ni, Cd, Cr, Pb, and As were plotted in relation to the concentration values in soil using Geographic Information System (GIS) technology

  17. Fluctuating concentrations of organochlorine pollutants during a breeding season in two antarctic seabirds: Adelie Penguin and Southern Fulmar

    NARCIS (Netherlands)

    Brink, van den N.W.; Franeker, van J.A.; Ruiter-Dijkman, de E.M.

    1998-01-01

    During the reproductive cycle significant fluctuations of concentrations of organochlorine pollutants were detected in blood and uropygial oil from Adelie penguins (Pygoscelis adeliae) and southern fulmars (Fulmarus glacialoides) from Hop Island, Antarctica. In the Adelie penguin, concentrations of

  18. Study of surface an atmospheric pollution in radioiodine from Hospitals

    International Nuclear Information System (INIS)

    Gomez Palacios, M.; Cuetos Menendez, A.

    1999-01-01

    In hospitals environment, the radioactive iodine surface contamination is one of the most important incident from the point of view of radiation protection. Among this kind of incidents we can consider vomit or urine spillage from ''131 I therapy or spillage of liquids contaminated with ''125 I from RIA laboratories. We have studied the dynamic of the contamination flow from the contaminated surface to the indoor air, using total activity in the spill, indoor air renewal rate, and resuspension rate as parameters. We describe a method to estimate the resuspension rate, assuming that this parameter is usually unknown, and its results for the following cases: urine or water, on paper-covered or uncovered plastic surface. By using the experimental results, we have studied the indoor air contamination evolution with time, as a function of both initial activity, and indoor air renewal rate. The maximum value of indoor air contamination is not dependent on the initial activity value. The resuspension process is slower in the case of urine spillage that in watery leakage. The use of porous paper may establish the difference between keeping and indoor air contamination below derived air concentration limit (CDAC), or clearly above DAC for may days. The indoor air contamination dependence from the air renewal rate, shows the convenience of high air renewal rate in places where contamination from ''131 I therapy were possible, and how although this factor is not so critical, it should be taken into account in RIA laboratories. (Author) 6 refs

  19. Effects of Roof-Edge Roughness on Air Temperature and Pollutant Concentration in Urban Canyons

    Science.gov (United States)

    Aliabadi, Amir A.; Krayenhoff, E. Scott; Nazarian, Negin; Chew, Lup Wai; Armstrong, Peter R.; Afshari, Afshin; Norford, Leslie K.

    2017-08-01

    The influence of roof-edge roughness elements on airflow, heat transfer, and street-level pollutant transport inside and above a two-dimensional urban canyon is analyzed using an urban energy balance model coupled to a large-eddy simulation model. Simulations are performed for cold (early morning) and hot (mid afternoon) periods during the hottest month of the year (August) for the climate of Abu Dhabi, United Arab Emirates. The analysis suggests that early in the morning, and when the tallest roughness elements are implemented, the temperature above the street level increases on average by 0.5 K, while the pollutant concentration decreases by 2% of the street-level concentration. For the same conditions in mid afternoon, the temperature decreases conservatively by 1 K, while the pollutant concentration increases by 7% of the street-level concentration. As a passive or active architectural solution, the roof roughness element shows promise for improving thermal comfort and air quality in the canyon for specific times, but this should be further verified experimentally. The results also warrant a closer look at the effects of mid-range roughness elements in the urban morphology on atmospheric dynamics so as to improve parametrizations in mesoscale modelling.

  20. Association between concentrations of air pollutants and mean time of hospitalization due to pneumonia in children

    Directory of Open Access Journals (Sweden)

    Luiz Fernando C. Nascimento

    2013-12-01

    Full Text Available A time-series ecological study was developed to estimate the role of air pollutants in the mean daily duration of hospitalization for pneumonia in children under one year old and living in São José dos Campos, SP, between January 1, 2009 and December 31, 2009. Air pollutants PM10, SO2 and O3, and climatic variables were measured by the Environmental Company of the State of São Paulo (Cetesb. The duration of each hospitalization was obtained from the Datasus site. The values of air pollutants and climatic variables were analyzed using multiple linear regression in lags of zero to five days; the dependent variable was the mean duration of hospitalization and the independent variables were the pollutants. We obtained R2 and alpha = 0.05 was the significance level of the model. There were 559 children under one year of age admitted during the study period; the mean hospital stay was 3.81 days (SD = 4.06. The PM10 was associated with length of stay in concurrent days and lags four and five (P <0.001, R2 = 0.08; a 15 μg.m-3 increase in concentration of this pollutant implies an increase of approximately one day of mean time of hospitalization for lags of 0, 4 and 5 days. It was therefore possible to identify the role of particulate matter in the duration of pneumonia hospitalizations in children.

  1. Simultaneous extraction and concentration of water pollution tracers using ionic-liquid-based systems.

    Science.gov (United States)

    Dinis, Teresa B V; Passos, Helena; Lima, Diana L D; Sousa, Ana C A; Coutinho, João A P; Esteves, Valdemar I; Freire, Mara G

    2017-07-29

    Human activities are responsible for the release of innumerous substances into the aquatic environment. Some of these substances can be used as pollution tracers to identify contamination sources and to prioritize monitoring and remediation actions. Thus, their identification and quantification are of high priority. However, due to their presence in complex matrices and at significantly low concentrations, a pre-treatment/concentration step is always required. As an alternative to the currently used pre-treatment methods, mainly based on solid-phase extractions, aqueous biphasic systems (ABS) composed of ionic liquids (ILs) and K 3 C 6 H 5 O 7 are here proposed for the simultaneous extraction and concentration of mixtures of two important pollution tracers, caffeine (CAF) and carbamazepine (CBZ). An initial screening of the IL chemical structure was carried out, with extraction efficiencies of both tracers to the IL-rich phase ranging between 95 and 100%, obtained in a single-step. These systems were then optimized in order to simultaneously concentrate CAF and CBZ from water samples followed by HPLC-UV analysis, for which no interferences of the ABS phase-forming components and other interferents present in a wastewater effluent sample have been found. Based on the saturation solubility data of both pollution tracers in the IL-rich phase, the maximum estimated concentration factors of CAF and CBZ are 28595- and 8259-fold. IL-based ABS can be thus envisioned as effective pre-treatment techniques of environmentally-related aqueous samples for a more accurate monitoring of mixtures of pollution tracers. Copyright © 2017 Elsevier B.V. All rights reserved.

  2. Impact of regional ventilation changes on surface particulate matter concentrations in South Korea

    Science.gov (United States)

    Kim, H. C.; Stein, A. F.; Chai, T.; Ngan, F.; Kim, B. U.; Jin, C. S.; Hong, S. Y.; Park, R.; Son, S. W.; Bae, C.; Bae, M.; Song, C. K.; Kim, S.

    2017-12-01

    The recent increase in surface particulate matter (PM) concentrations in South Korea is intriguing due to its disagreement with current intensive emission reduction efforts. The long-term trend of surface PM concentrations in South Korea declined in the 2000s, but since 2012 its concentrations have tended to increase, resulting in frequent severe haze events in the region. This study demonstrates that the interannual variation of surface PM concentrations in South Korea is not only affected by changes in local or regional emission sources, but also closely linked with the interannual variations in regional ventilation. Using EPA Community Multiscale Air Quality modeling system, a 12-year (2004-2015) regional air quality simulation was conducted to assess the impact of the meteorological conditions under constant anthropogenic emissions. In addition, NOAA HYSPLIT dispersion model was utilized to estimate the strength of regional ventilation that dissipates local pollutions. Simulated PM concentrations show a strong negative correlation (i.e. R=-0.86) with regional wind speed, implying that reduced regional ventilation is likely associated with more stagnant conditions that cause severe pollutant episodes in South Korea. We conclude that the current PM concentration trend in South Korea is a combination of long-term decline by emission control efforts and short-term fluctuations in regional wind speed interannual variability. When the meteorology-driven variations are removed, PM concentrations in South Korea have declined continuously even after 2012, with -1.45±0.12, -1.41±0.16, and -1.09±0.16 mg/m3 per year in Seoul, the Seoul Metropolitan Area, and South Korea, respectively.

  3. Heavy metal concentrations in a soil-plant-snail food chain along a terrestrial soil pollution gradient.

    NARCIS (Netherlands)

    Notten, M.J.M.; Oosthoek, A.; Rozema, J.; Aerts, R.

    2005-01-01

    We investigated concentrations of Zn, Cu, Cd and Pb in the compartments of a soil-plant (Urtica dioica)-snail (Cepaea nemoralis) food chain in four polluted locations in the Biesbosch floodplains, the Netherlands, and two reference locations. Total soil metal concentrations in the polluted locations

  4. Equilibrium sampling of environmental pollutants in fish: Comparison with lipid- normalized concentrations and homogenization effects on chemical activity

    DEFF Research Database (Denmark)

    Jahnke, Annika; Mayer, Philipp; Adolfsson-Erici, Margaretha

    2011-01-01

    Equilibrium sampling of organic pollutants into the silicone polydimethylsiloxane (PDMS) has recently been applied in biological tissues including fish. Pollutant concentrations in PDMS can then be multiplied with lipid/PDMS distribution coefficients (DLipid,PDMS) to obtain concentrations in fish...

  5. Ambient air pollutant concentrations during pregnancy and the risk of fetal growth restriction

    Science.gov (United States)

    Rich, David Q.; Demissie, Kitaw; Lu, Shou-En; Kamat, Leena; Wartenberg, Daniel; Rhoads, George G.

    2014-01-01

    Background Previous studies of air pollution and birth outcomes have not evaluated whether complicated pregnancies might be susceptible to the adverse effects of air pollution. We hypothesized that trimester mean pollutant concentrations would be associated with fetal growth restriction, with larger risks among complicated pregnancies. Methods We used a multiyear linked birth certificate and maternal/newborn hospital discharge dataset of singleton, term births to mothers residing in New Jersey at the time of birth, who were White (non-Hispanic), African American (non-Hispanic), or Hispanic. We defined very small for gestational age (VSGA) as a fetal growth ratio pregnancy complications. Results We found significantly increased risk of SGA associated with 1st and 3rd trimester PM2.5, and increased risk of VSGA associated with 1st, 2nd, and 3rd trimester NO2 concentrations. Pregnancies complicated by placental abruption and premature rupture of the membrane had ~2-5 fold greater excess risks of SGA/VSGA than pregnancies not complicated by these conditions, although these estimates were not statistically significant. Conclusions These findings suggest that ambient air pollution, perhaps specifically traffic emissions during early and late pregnancy and/or factors associated with residence near a roadway during pregnancy, may affect fetal growth. Further, pregnancy complications may increase susceptibility to these effects in late pregnancy. PMID:19359274

  6. Heavy metal pollution characteristics of surface sediments in different aquatic ecosystems in eastern China: a comprehensive understanding.

    Directory of Open Access Journals (Sweden)

    Wenzhong Tang

    Full Text Available Aquatic ecosystems in eastern China are suffering threats from heavy metal pollution because of rapid economic development and urbanization. Heavy metals in surface sediments were determined in five different aquatic ecosystems (river, reservoir, estuary, lake, and wetland ecosystems. The average Cd, Cr, Cu, Ni, Pb, and Zn concentrations were 0.716, 118, 37.3, 32.7, 56.6, and 204 mg/kg, respectively, and the higher concentrations were mainly found in sediment samples from river ecosystems. Cd was the most anthropogenically enriched pollutant, followed by Zn and Pb, indicated by enrichment factors >1.5. According to consensus-based sediment quality guidelines, potential ecological risk indices, and risk assessment codes, all five types of aquatic ecosystems were found to be polluted with heavy metals, and the most polluted ecosystems were mainly rivers. Cd was the most serious pollutant in all five aquatic ecosystems, and it was mainly found in the exchangeable fraction (about 30% of the total Cd concentration, on average. The results indicate that heavy metal contamination, especially of Cd, in aquatic ecosystems in eastern China should be taken into account in the development of management strategies for protecting the aquatic environment.

  7. Concentration polarization, surface currents, and bulk advection in a microchannel

    DEFF Research Database (Denmark)

    Nielsen, Christoffer Peder; Bruus, Henrik

    2014-01-01

    We present a comprehensive analysis of salt transport and overlimiting currents in a microchannel during concentration polarization. We have carried out full numerical simulations of the coupled Poisson-Nernst-Planck-Stokes problem governing the transport and rationalized the behavior of the syst...... as in the limit of negligible surface charge. By including the effects of diffusion and advection in the diffuse part of the electric double layers, we extend a recently published analytical model of overlimiting current due to surface conduction....

  8. Ice-nucleating particle concentrations unaffected by urban air pollution in Beijing, China

    Science.gov (United States)

    Chen, Jie; Wu, Zhijun; Augustin-Bauditz, Stefanie; Grawe, Sarah; Hartmann, Markus; Pei, Xiangyu; Liu, Zirui; Ji, Dongsheng; Wex, Heike

    2018-03-01

    Exceedingly high levels of PM2.5 with complex chemical composition occur frequently in China. It has been speculated whether anthropogenic PM2.5 may significantly contribute to ice-nucleating particles (INP). However, few studies have focused on the ice-nucleating properties of urban particles. In this work, two ice-nucleating droplet arrays have been used to determine the atmospheric number concentration of INP (NINP) in the range from -6 to -25 °C in Beijing. No correlations between NINP and either PM2.5 or black carbon mass concentrations were found, although both varied by more than a factor of 30 during the sampling period. Similarly, there were no correlations between NINP and either total particle number concentration or number concentrations for particles with diameters > 500 nm. Furthermore, there was no clear difference between day and night samples. All these results indicate that Beijing air pollution did not increase or decrease INP concentrations in the examined temperature range above values observed in nonurban areas; hence, the background INP concentrations might not be anthropogenically influenced as far as urban air pollution is concerned, at least in the examined temperature range.

  9. Metal concentrations in homing pigeon lung tissue as a biomonitor of atmospheric pollution.

    Science.gov (United States)

    Cui, Jia; Halbrook, Richard S; Zang, Shuying; Han, Shuang; Li, Xinyu

    2018-03-01

    Atmospheric pollution in urban areas is a major worldwide concern with potential adverse impacts on wildlife and humans. Biomonitoring can provide direct evidence of the bioavailability and bioaccumulation of toxic metals in the environment that is not available with mechanical air monitoring. The current study continues our evaluation of the usefulness of homing pigeon lung tissue as a biomonitor of atmospheric pollution. Homing pigeons (1-2, 5-6, and 9-10+ year old (yo)) collected from Guangzhou during 2015 were necropsied and concentrations of cadmium (Cd), lead (Pb), and mercury (Hg) were measured in lung tissue. Lung Cd and Pb concentrations were significantly greater in 9-10+-year-old pigeons compared with those in other age groups, indicating their bioavailability and bioaccumulation. Lung Pb and Cd concentrations measured in 5-yo pigeons collected from Guangzhou during 2015 were significantly lower than concentrations reported in 5-yo homing pigeons collected from Guangzhou during 2011 and correlated with concentrations measured using mechanical air monitoring. In addition to temporal differences, spatial differences in concentrations of Cd, Pb, and Hg reported in ambient air samples and in pigeon lung tissues collected from Beijing and Guangzhou are discussed.

  10. Application of ultradisperse magnetic adsorbents for removal of small concentrations of pollutants from large volumes of water

    Science.gov (United States)

    Nechitailo, Galina S.; Kuznetsov, Anatoli; Kuznetsov, Oleg

    2016-07-01

    Pollution of natural bodies of water (rivers, lakes, ground water, etc) is unfortunately very common, both from natural sources like volcanic activity; and, even more importantly, from human activity, including disposal of industrial and municipal waste, mining, etc. Many toxic substances are harmful for humans and other organisms even in very low concentrations (e.g., less than 1 µg/L of cadmium is harmful, for Hg it is 0.5 µg/L, for phenol - 1 µg/L), and can remain in water for decades or longer. Cleaning large volumes of water even from low concentrations of pollutants is a challenging technological task and is very expensive. We propose to use suspension of ultradisperse magnetic adsorbents, for example, nanostructured ferro-carbon particles, produced by plasmachemical technique, for removing small concentrations of pollutants from large volumes of water. The suspension is introduced into the water. Due to their small sizes and densities similar to water (we measured the density of FC-4 ferro-carbon to be about 1 g/cm3; presumably due to porosity) the particles do not sediment for a long time (hours, days or longer), move due to Brownian motion and adsorb a variety of substances from the water. The particle surface can be modified to provide selectivity of the adsorption. Sorption capacities of ferro-carbon adsorbents is in dozens of percent. Therefore, to collect 1 kg of a pollutant, 2 to 20 kg of the adsorbents is required. Then the particles with the adsorbed contaminant can be collected (e.g., downstream of the river) using a variety of magnetic traps. The traps can consist of ferromagnetic wires and permanent magnets, a variety of simple and inexpensive designs are available. As a model system, the kinetics of adsorption of a highly diluted (0.002 mg/ml) aqueous solution of a low molecular weight compound (toluidine blue) by a small concentration of a ferro-carbon powder (FC-4) was studied by spectrophotometry. Before each measurement, the particles

  11. Pollutant concentration in fog water samples from Milešovka

    Czech Academy of Sciences Publication Activity Database

    Fišák, Jaroslav; Řezáčová, Daniela; Weignerová, Veronika; Tesař, Miroslav

    č. 56 (2002), s. 29-34. ISBN 952-5027-76-7. ISSN 0784-3496. [Czech - Finnish aerosol symposium. Praha, 23.05.2002-26.05.2002] R&D Projects: GA ČR GA205/99/1426 Institutional research plan: CEZ:AV0Z3042911 Keywords : atmospheric aerosol * fog /cloud water * pollutant concentration Subject RIV: DG - Athmosphere Sciences, Meteorology

  12. Study on the Concentration Measurement of the Pollution Gases from Coal-Fired Power Station

    International Nuclear Information System (INIS)

    Zheng, L J; Li, W

    2006-01-01

    CO 2 is a main kind of pollution gases discharged from coal-fired power station. The relationship between gas concentration and pressure, temperature is deduced base on the law of Beer-Lambert and the theory of gas line-shape. The tunable diode laser spectral technology is used to analyze the changing regularity of the peak, half-peak width of the absorption curve with pressure and temperature

  13. The Impact of Future Emissions Changes on Air Pollution Concentrations and Related Human Health Effects

    Science.gov (United States)

    Mikolajczyk, U.; Suppan, P.; Williams, M.

    2015-12-01

    Quantification of potential health benefits of reductions in air pollution on the local scale is becoming increasingly important. The aim of this study is to conduct health impact assessment (HIA) by utilizing regionally and spatially specific data in order to assess the influence of future emission scenarios on human health. In the first stage of this investigation, a modeling study was carried out using the Weather Research and Forecasting (WRF) model coupled with Chemistry to estimate ambient concentrations of air pollutants for the baseline year 2009, and for the future emission scenarios in southern Germany. Anthropogenic emissions for the baseline year 2009 are derived from the emission inventory provided by the Netherlands Organization of Applied Scientific Research (TNO) (Denier van der Gon et al., 2010). For Germany, the TNO emissions were replaced by gridded emission data with a high spatial resolution of 1/64 x 1/64 degrees. Future air quality simulations are carried out under different emission scenarios, which reflect possible energy and climate measures in year 2030. The model set-up included a nesting approach, where three domains with horizontal resolution of 18 km, 6 km and 2 km were defined. The simulation results for the baseline year 2009 are used to quantify present-day health burdens. Concentration-response functions (CRFs) for PM2.5 and NO2 from the WHO Health risks of air Pollution in Europe (HRAPIE) project were applied to population-weighted mean concentrations to estimate relative risks and hence to determine numbers of attributable deaths and associated life-years lost. In the next step, future health impacts of projected concentrations were calculated taking into account different emissions scenarios. The health benefits that we assume with air pollution reductions can be used to provide options for future policy decisions to protect public health.

  14. Concentrations of mercury in tissues of striped dolphins suggest decline of pollution in Mediterranean open waters.

    Science.gov (United States)

    Borrell, A; Aguilar, A; Tornero, V; Drago, M

    2014-07-01

    The Mediterranean is a semi-enclosed sea subject to high mercury (Hg) pollution from both natural and anthropogenic sources. With the objective of discerning temporal changes in marine Hg pollution in the oceanic waters of the northwestern Mediterranean Sea, we analysed liver and kidney from striped dolphins (Stenella coeruleoalba) collected during 2007-2009 and compared them with previous results from a similar sample from 1990-1993. The effect of body length and sex on tissue Hg concentrations was investigated to ensure an unbiased comparison between the periods. The Hg concentrations did not show significant sex-related differences in any tissue or period but were correlated positively with body length. Using body length as a covariate, Hg concentrations in liver and kidney were higher in 1990-1993 than in 2007-2009. This result suggests that measures to reduce emissions in Western European countries have been effective in reducing mercury pollution in Mediterranean open waters. Copyright © 2014 Elsevier Ltd. All rights reserved.

  15. Organic polar pollutants in surface waters of inland seas.

    Science.gov (United States)

    Orlikowska, Anna; Fisch, Kathrin; Schulz-Bull, Detlef E

    2015-12-30

    Available data about contamination by polar substances are mostly reported for rivers and near-shore waters and only limited studies exists about their occurrence in marine waters. We present concentrations and distribution of several polar pesticides and UV-filters in surface waters of three inland seas, the Baltic, Black and Mediterranean Sea. Many of the investigated compounds were below detection limits, however, those found in off-shore waters raise a concern about their persistence and possible adverse effect on the ecosystem. Despite a longstanding EU-wide ban we were able to detect atrazine in the Mediterranean and the Baltic Sea. Concentrations in the Black Sea were substantially higher. Runoff from agricultural and urban areas was the main transport route to marine ecosystems for investigated compounds, though irgarol in Mediterranean waters was attributed to intense maritime traffic. 2-Phenylbenzimidazole-5-sulfonic acid was the only UV-filter detected in marine waters, while benzophenone-4 was observed in the estuaries. Occurrence of UV-filters was seasonal. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. Heavy Metal Pollution of Surface Soil in Thrace Region (Turkey)

    CERN Document Server

    Cocskun, M; Frontasyeva, M V; Munevver, C; Eidhammer Sjobakk, T; Demkina, S V

    2004-01-01

    Samples of surface soil were collected at 73 sites in the Thrace region, northwest part of Turkey. Two complementary analytical techniques, epithermal neutron activation analysis (ENAA) and atomic absorption spectrometry (AAS) with flame and graphite furnace atomization were used to determine 37 elements in the soil samples. Concentrations of Cu, Zn, Ni, Cd, Mn, Co, Pb, and As were determined using AAS and GF AAS and ENAA was used for the remaining 29 elements. Results for As, Ba, Br, Ca, Cd, Ce, Cr, Cs, Eu, Fe, Hf, I, In, K, La, Mn, Mo, Na, Nd, Rb, Sb, Sc, Sm, Sr, Ta, Tb, Th, Ti, U, and V are reported for the first time for soils from this region. The results show that concentrations of the most elements were little affected by the industrial and other anthropogenic activities performed in the region. Except for distinctly higher levels of Pb, Cu, Cd, and Zn in Istanbul district than the median values for the Thrace region, the observed distributions seem to be mainly associated with lithogenic variations. S...

  17. Pinus sylvestris L. needle surface wettability parameters as indicators of atmospheric environment pollution impacts: Novel contact angle hysteresis methodology

    Science.gov (United States)

    Pogorzelski, Stanisław J.; Rochowski, Pawel; Szurkowski, Janusz

    2014-02-01

    An investigation of water contact angles (CAs), contact angle hysteresis (CAH) was carried out for 1-year to 4-year old needles (Pinus sylvestris) collected in urban (Gdansk) and rural (Karsin) locations using an original measuring technique based on the geometry of the drop on a vertical filament. Concentrations of air pollutants (SO2, NOx, C6H6, and suspended particular matter - SPM) currently considered to be most important in causing direct damage to vegetation were simultaneously monitored. A set of the surface wettability parameters: the apparent surface free energy γSV, adhesive film tension Π, work of adhesion WA, and spreading WS, were determined from CAH data using the approach developed by Chibowski (2003) to quantify the surface energetics of the needle substrata affected by aging and pollution impacts. This formalism relates the total apparent surface free energy of the solid γSV with only three measurable quantities: the surface tension of the probe liquid γLV and its advancing θA and receding θR contact angle hysteresis. Since CAH depends on the outermost wax layer surface roughness and spatial physicochemical heterogeneity of a solid surface, CA data were corrected using surface architecture profiles registered with confocal scanning laser microscopy. It was found that the roughness parameter r is significantly negatively correlated (R = -0.74) with the needle age (collected at Karsin). The needle surface aging process resulted in its surface hydrophilization (CA↓ and CAH↓ with γSV↑ and WA↑). A temporal evolution of the needles wettability was traced with the data point distribution in the 2D space of CAH plotted versus WS. The wettability parameters were closely correlated to pollutant concentrations as evidenced from Spearman's rank correlation procedure (R = 0.63-0.91; p biological systems.

  18. Heavy metal concentrations in the surface marine sediments of Sfax Coast, Tunisia.

    Science.gov (United States)

    Gargouri, Dorra; Azri, Chafai; Serbaji, Mohamed Moncef; Jedoui, Younes; Montacer, Mabrouk

    2011-04-01

    Sixty-seven surface marine sediment samples in the Sfax (Tunisia) were analyzed by inductively coupled plasma-atomic emission spectrometry for seven heavy metals (Pb, Ni, Cu, Cr, Zn, Cd, and Fe). Metal concentrations were compared with natural values, marine sediment quality standards, and also with other results concerning sediments from several Mediterranean coasts. The study of their spatial distributions refined by complementary approaches including principal component analysis, enrichment factors, and geoaccumulation index showed a significant impact of multiple anthropogenic sources. These included industrial sources and municipal discharges of the urban Sfax and also non-controlled discharges in rural zones close to the coastline. Moderate pollution of sediments, especially by Pb, Zn, and Ni, was shown to exist in localized sites. Besides, it was shown that other sites, slightly to highly enriched in terms of Cu, Cr, and Cd, are characterized by a quality of sediments varying from unpolluted to moderately polluted.

  19. Multiscale modeling of multi-decadal trends in air pollutant concentrations and their radiative properties: the role of models in an integrated observing system

    Science.gov (United States)

    Mathur, R.; Xing, J.; Szykman, J.; Gan, C. M.; Hogrefe, C.; Pleim, J. E.

    2015-12-01

    Air Pollution simulation models must address the increasing complexity arising from new model applications that treat multi-pollutant interactions across varying space and time scales. Setting and attaining lower ambient air quality standards requires an improved understanding and quantification of source attribution amongst the multiple anthropogenic and natural sources, on time scales ranging from episodic to annual and spatial scales ranging from urban to continental. Changing emission patterns over the developing regions of the world are likely to exacerbate the impacts of long-range pollutant transport on background pollutant levels, which may then impact the attainment of local air quality standards. Thus, strategies for reduction of pollution levels of surface air over a region are complicated not only by the interplay of local emissions sources and several complex physical, chemical, dynamical processes in the atmosphere, but also hemispheric background levels of pollutants. Additionally, as short-lived climate forcers, aerosols and ozone exert regionally heterogeneous radiative forcing and influence regional climate trends. EPA's coupled WRF-CMAQ modeling system is applied over a domain encompassing the northern hemisphere for the period spanning 1990-2010. This period has witnessed significant reductions in anthropogenic emissions in North America and Europe as a result of implementation of control measures and dramatic increases across Asia associated with economic and population growth, resulting in contrasting trends in air pollutant distributions and transport patterns across the northern hemisphere. Model results (trends in pollutant concentrations, optical and radiative characteristics) across the northern hemisphere are analyzed in conjunction with surface, aloft and remote sensing measurements to contrast the differing trends in air pollution and aerosol-radiation interactions in these regions over the past two decades. Given the future LEO (Trop

  20. Assessment of the Pollutants in Soils and Surface Waters Around Gümüşköy Silver Mine (Kütahya, Turkey).

    Science.gov (United States)

    Arslan, Şebnem; Çelik, Mehmet

    2015-10-01

    Heavy metal concentrations in surface water and soil samples around Gümüşköy Silver Mine, located in Köprüören Basin, were determined to evaluate the anthropogenic level of contamination due to mining activities. The mean concentrations of As, Pb, Sb and Cd in 12 soil samples came out to be 1193, 844, 66 and 19 ppm, respectively. Soil pollution assessment was carried out by using geoaccumulation index (Igeo), enrichment factor (EF) and pollution index (PI). Igeo, EF and PI suggest anthropogenic pollution of As, Pb, Sb and Zn in the areas where there is leakage of these heavy metals from the waste pools of the silver mine facility. Water samples collected from the surface waters also have elevated concentrations of these heavy metals. The contaminants are most probably transported by surface waters in the rainy season.

  1. Fuzzy rule based estimation of agricultural diffuse pollution concentration in streams.

    Science.gov (United States)

    Singh, Raj Mohan

    2008-04-01

    Outflow from the agricultural fields carries diffuse pollutants like nutrients, pesticides, herbicides etc. and transports the pollutants into the nearby streams. It is a matter of serious concern for water managers and environmental researchers. The application of chemicals in the agricultural fields, and transport of these chemicals into streams are uncertain that cause complexity in reliable stream quality predictions. The chemical characteristics of applied chemical, percentage of area under the chemical application etc. are some of the main inputs that cause pollution concentration as output in streams. Each of these inputs and outputs may contain measurement errors. Fuzzy rule based model based on fuzzy sets suits to address uncertainties in inputs by incorporating overlapping membership functions for each of inputs even for limited data availability situations. In this study, the property of fuzzy sets to address the uncertainty in input-output relationship is utilized to obtain the estimate of concentrations of a herbicide, atrazine, in a stream. The data of White river basin, a part of the Mississippi river system, is used for developing the fuzzy rule based models. The performance of the developed methodology is found encouraging.

  2. Surface Coating of Wood Building Products National Emission Standards for Hazardous Air Pollutants (NESHAP) Applicability Flowchart

    Science.gov (United States)

    This page contains a January 2005 document that has a flow chart to help you determine if this National Emission Standards for Hazardous Air Pollutants (NESHAP) rule for Surface Coating of Wood Building Products applies to your facility.

  3. Local cartography of persistent organic pollutants (PCDD/F, PCB) concentrations in soils of three French departments. How to define background concentrations?

    Science.gov (United States)

    Clozel, Blandine

    2017-04-01

    As part of the Regional Health Plan for the Rhône-Alpes area (France), a cartography of soil contamination by persistent organic pollutants (dioxins/furans (PCDD/PCDF) and polychlorinated biphenyls (PCB)) was undertaken in order to define the background concentrations of soils located away from point source pollution. In the natural environment, PCDD/PCDF and PCB comes from air pollution and accumulate in the upper part of the soils. To define the background concentration of persistent organic pollutants from diffuse atmospheric origin in soils, sampling was carried out within the first 5 centimeters of soils that have been very little anthropized and untilled for more than 15 years. In such soils mixing and dilution of the pollutants is very limited. 170 samples were collected following a systematic plan of grid type (mesh of 8 x 8 km) in an area of 14 000km2, avoiding soil of high altitude and from urban area. Beyond their total concentration, the ratio of the congeners of PCBs (7 indicators and 12 dioxin-like) and of the 17 dioxins/furans was also used for interpretation. As expected, the concentrations in pollutants are globally lower in the rural zones than in the more industrialized ones. However, the pollutants are relatively enriched in valleys, confirming that the meteorological conditions and the local topography play a significant role in the repartition of the diffuse atmospheric pollution. For the vast majority of samples, even some of those presenting the highest total concentration, the ratio of the various congeners argues for an ancient origin of the contamination. All studies at the French or European level of the atmospheric concentration of organic pollutants indicate a progressive decrease in emissions of these contaminants for about 20 years. However, the soils have been receptors since a long time and such pollutants have accumulated. The congeners ratio give evolved signature of pollution indicating, on one hand, it is mainly due to past

  4. Pollution

    NARCIS (Netherlands)

    Dürr, E.; Jaffe, R.; Nonini, D.M.

    2014-01-01

    This essay points to the role of pollution in understanding the social construction of hierarchies and urban space. Conceptualizations of pollution and approaches to waste management always reflect the Zeitgeist and tend to be politically charged. We argue that an ethnographic approach to pollution

  5. What Causes Haze Pollution? An Empirical Study of PM2.5 Concentrations in Chinese Cities

    Directory of Open Access Journals (Sweden)

    Jiannan Wu

    2016-01-01

    Full Text Available In recent years, many areas of China have suffered from serious haze pollution, which greatly affects human health and daily life. It is of policy importance to understand the factors that influence the spatial concentration of PM2.5. Based on data from 74 cities with PM2.5 monitoring stations in 2013 and 2014, this study presents the overall haze situation in China and explores the determinants of PM2.5 using a random-effects model, as well as a set of OLS regressions. The results indicate that PM2.5 is significantly correlated with the industrial proportion, the number of motor vehicles, and household gas consumption, while public financial expenditure on energy saving and environmental protection does not show statistically significant effects. The analysis implies that China should adjust its economic structure and optimizes environmental governance to effectively respond to haze pollution.

  6. Concentration of involatile salts at evaporating water surfaces

    International Nuclear Information System (INIS)

    Gardner, G.C.

    1988-02-01

    Safety cases for the PWR often need to know how much of the soluble salts in the water will evaporate with the steam during flashing and when the steam is discharged to the atmosphere. Some ideal evaporating systems to give guidance. Simple formulae are derived for the surface concentration relative to the bulk concentration. An analysis is also presented which derives a formula for the mass transfer process in the steam due to both diffusion and convection, which arises from the evaporation process. The convection process will usually dominate. (author)

  7. Surface Modification of Graphene Oxides by Plasma Techniques and Their Application for Environmental Pollution Cleanup.

    Science.gov (United States)

    Wang, Xiangxue; Fan, Qiaohui; Chen, Zhongshan; Wang, Qi; Li, Jiaxing; Hobiny, Aatef; Alsaedi, Ahmed; Wang, Xiangke

    2016-02-01

    Graphene oxides (GOs) have come under intense multidisciplinary study because of their unique physicochemical properties and possible applications. The large amount of oxygen-containing functional groups on GOs leads to a high sorption capacity for the removal of various kinds of organic and inorganic pollutants from aqueous solutions in environmental pollution cleanup. However, the lack of selectivity results in difficulty in the selective removal of target pollutants from aqueous solutions in the presence of other coexisting pollutants. Herein, the surface grafting of GOs with special oxygen-containing functional groups using low-temperature plasma techniques and the application of the surface-modified GOs for the efficient removal of organic and inorganic pollutants in environmental pollution are reviewed. This paper gives an account of our research on the application of GO-based nanomaterials in environmental pollution cleanup, including: (1) the synthesis and surface grafting of functional groups on GOs, summarizing various types of low-temperature plasma techniques for the synthesis of graphene/GOs; and (2) the application of graphene/GOs and their composites for the efficient removal of organic and inorganic pollutants from aqueous solutions, including the interaction mechanism according to recently published results. © 2015 The Chemical Society of Japan & Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. Assessment of sampling strategies for estimation of site mean concentrations of stormwater pollutants.

    Science.gov (United States)

    McCarthy, David T; Zhang, Kefeng; Westerlund, Camilla; Viklander, Maria; Bertrand-Krajewski, Jean-Luc; Fletcher, Tim D; Deletic, Ana

    2018-02-01

    The estimation of stormwater pollutant concentrations is a primary requirement of integrated urban water management. In order to determine effective sampling strategies for estimating pollutant concentrations, data from extensive field measurements at seven different catchments was used. At all sites, 1-min resolution continuous flow measurements, as well as flow-weighted samples, were taken and analysed for total suspend solids (TSS), total nitrogen (TN) and Escherichia coli (E. coli). For each of these parameters, the data was used to calculate the Event Mean Concentrations (EMCs) for each event. The measured Site Mean Concentrations (SMCs) were taken as the volume-weighted average of these EMCs for each parameter, at each site. 17 different sampling strategies, including random and fixed strategies were tested to estimate SMCs, which were compared with the measured SMCs. The ratios of estimated/measured SMCs were further analysed to determine the most effective sampling strategies. Results indicate that the random sampling strategies were the most promising method in reproducing SMCs for TSS and TN, while some fixed sampling strategies were better for estimating the SMC of E. coli. The differences in taking one, two or three random samples were small (up to 20% for TSS, and 10% for TN and E. coli), indicating that there is little benefit in investing in collection of more than one sample per event if attempting to estimate the SMC through monitoring of multiple events. It was estimated that an average of 27 events across the studied catchments are needed for characterising SMCs of TSS with a 90% confidence interval (CI) width of 1.0, followed by E.coli (average 12 events) and TN (average 11 events). The coefficient of variation of pollutant concentrations was linearly and significantly correlated to the 90% confidence interval ratio of the estimated/measured SMCs (R 2  = 0.49; P sampling frequency needed to accurately estimate SMCs of pollutants. Crown

  9. Air quality more extensive monitoring of particulates pollution but concentrations must be reduced by 2005

    International Nuclear Information System (INIS)

    Ba, M.; Colosio, J.

    2000-09-01

    Most epidemiological data point to a link between the concentrations of particles measured in the ambient air and the effects of air pollution on human health. Particulates emitted by road traffic and industry are among the most harmful; they carry serious risks. The particulate monitoring network and legislation on the issue are constantly changing. In France, the number of monitoring stations has more than doubled in recent years. EC Directive 1999/30/EC of 22 April 1999 sets limit values for concentrations of particulates in ambient air to be complied with at certain given dates. In France, while the concentrations measured in urban areas with over 100 000 inhabitants are below the limit values set by the Directive for today, they are significantly higher than those to be complied with by 1 January 2005. (author)

  10. Inclusion in the simulation of air pollutants recorded over the borders of test areas in Niedersachsen and forecasting of local ground level concentrations

    International Nuclear Information System (INIS)

    Mueller-Reissmann, K.F.; Schaffner, J.

    1991-08-01

    In 1987-1989 an emission-ground level concentration-model (conversion of emission into ground level concentration) was established for the pollutant sulphur dioxide (SO 2 ) by the ISP (Hannover) in cooperation with GEOS (Berlin) and was with emission data of the environs of Braunschweig for 1987 subjected to different trial runs. The pollution sources were devided into four groups: - Large Emitters (particularly power plants) - medium emitters (particularly industry) - space heating and small consumers - traffic. The pollution emitters of the first two groups were considered as point sources and the last two groups as surface sources, their emissions being evently distributed over squares of 1 km x 1 km, each surface unit of one km 2 being represented by 400 point sources in a distance of 50 m from each other. The conversion of emissions into ground level concentration is based on the Gaussian dispersion model on which also the dispersion calculation of the TA Luft (technical regulation about air pollution) is based. (orig./KW) [de

  11. Observational assessment of the role of nocturnal residual-layer chemistry in determining daytime surface particulate nitrate concentrations

    Directory of Open Access Journals (Sweden)

    G. Prabhakar

    2017-12-01

    Full Text Available This study discusses an analysis of combined airborne and ground observations of particulate nitrate (NO3−(p concentrations made during the wintertime DISCOVER-AQ (Deriving Information on Surface Conditions from COlumn and VERtically resolved observations relevant to Air Quality study at one of the most polluted cities in the United States – Fresno, CA – in the San Joaquin Valley (SJV and focuses on developing an understanding of the various processes that impact surface nitrate concentrations during pollution events. The results provide an explicit case-study illustration of how nighttime chemistry can influence daytime surface-level NO3−(p concentrations, complementing previous studies in the SJV. The observations exemplify the critical role that nocturnal chemical production of NO3−(p aloft in the residual layer (RL can play in determining daytime surface-level NO3−(p concentrations. Further, they indicate that nocturnal production of NO3−(p in the RL, along with daytime photochemical production, can contribute substantially to the buildup and sustaining of severe pollution episodes. The exceptionally shallow nocturnal boundary layer (NBL heights characteristic of wintertime pollution events in the SJV intensify the importance of nocturnal production aloft in the residual layer to daytime surface concentrations. The observations also demonstrate that dynamics within the RL can influence the early-morning vertical distribution of NO3−(p, despite low wintertime wind speeds. This overnight reshaping of the vertical distribution above the city plays an important role in determining the net impact of nocturnal chemical production on local and regional surface-level NO3−(p concentrations. Entrainment of clean free-tropospheric (FT air into the boundary layer in the afternoon is identified as an important process that reduces surface-level NO3−(p and limits buildup during pollution episodes. The influence of dry deposition of HNO

  12. Observational assessment of the role of nocturnal residual-layer chemistry in determining daytime surface particulate nitrate concentrations

    Science.gov (United States)

    Prabhakar, Gouri; Parworth, Caroline L.; Zhang, Xiaolu; Kim, Hwajin; Young, Dominique E.; Beyersdorf, Andreas J.; Ziemba, Luke D.; Nowak, John B.; Bertram, Timothy H.; Faloona, Ian C.; Zhang, Qi; Cappa, Christopher D.

    2017-12-01

    This study discusses an analysis of combined airborne and ground observations of particulate nitrate (NO3-(p)) concentrations made during the wintertime DISCOVER-AQ (Deriving Information on Surface Conditions from COlumn and VERtically resolved observations relevant to Air Quality) study at one of the most polluted cities in the United States - Fresno, CA - in the San Joaquin Valley (SJV) and focuses on developing an understanding of the various processes that impact surface nitrate concentrations during pollution events. The results provide an explicit case-study illustration of how nighttime chemistry can influence daytime surface-level NO3-(p) concentrations, complementing previous studies in the SJV. The observations exemplify the critical role that nocturnal chemical production of NO3-(p) aloft in the residual layer (RL) can play in determining daytime surface-level NO3-(p) concentrations. Further, they indicate that nocturnal production of NO3-(p) in the RL, along with daytime photochemical production, can contribute substantially to the buildup and sustaining of severe pollution episodes. The exceptionally shallow nocturnal boundary layer (NBL) heights characteristic of wintertime pollution events in the SJV intensify the importance of nocturnal production aloft in the residual layer to daytime surface concentrations. The observations also demonstrate that dynamics within the RL can influence the early-morning vertical distribution of NO3-(p), despite low wintertime wind speeds. This overnight reshaping of the vertical distribution above the city plays an important role in determining the net impact of nocturnal chemical production on local and regional surface-level NO3-(p) concentrations. Entrainment of clean free-tropospheric (FT) air into the boundary layer in the afternoon is identified as an important process that reduces surface-level NO3-(p) and limits buildup during pollution episodes. The influence of dry deposition of HNO3 gas to the surface on

  13. Decontamination of radionuclide strontium polluted the analog instruments surface by high stable foam

    International Nuclear Information System (INIS)

    Zhu Gaolong; Chen Shuai; Lin Xiaoyan; Luo Xuegang

    2014-01-01

    Decontamination of the radionuclide strontium polluted the analog instruments surface radionuclide strontium by foam, where the high stable foam detergent was prepared by Sodium dodecylbenzene sulfonate (SDBS) as a foaming agent and hydroxyethyl cellulose (HEC) as a foam stabilizer. The effects of adding a foam stabilizer hydroxyethyl cellulose (HEC) on foam stability and the volume of drainage liquid were discussed and contact time, foaming agent concentration, temperature, humidity on foam decontamination efficiency of the analog instruments surface by radionuclide strontium were observed. The results show that there has been a significant increase of foam stability with the increase of HEC addition, the volume of drainage liquid was decrease from 7.8 g to 0 g and the half decay time of foam was extended from 305 seconds to 1050 seconds after the HEC addition increase from 0 % to 3%. The half decay time increase with the continue to increase of HEC addition but decrease of the foamability. The foam drainage speed up with the increase of temperture, the foam will burst rapidly when the temperture is higer than 600 ℃. The high table foam has a effective decontamination efficiency between 88%∼95%. contact time, foaming agent concentration, humidity do not much affect on the foam decontamination. In order to reduce the affect of volume of drainage liquid on the precision instrument, the contact time should control in 3 min. (authors)

  14. Determinants of perceived air pollution annoyance and association between annoyance scores and air pollution (PM 2.5, NO 2) concentrations in the European EXPOLIS study

    Science.gov (United States)

    Rotko, Tuulia; Oglesby, Lucy; Künzli, Nino; Carrer, Paolo; Nieuwenhuijsen, Mark J.; Jantunen, Matti

    Apart from its traditionally considered objective impacts on health, air pollution can also have perceived effects, such as annoyance. The psychological effects of air pollution may often be more important to well-being than the biophysical effects. Health effects of perceived annoyance from air pollution are so far unknown. More knowledge of air pollution annoyance levels, determinants and also associations with different air pollution components is needed. In the European air pollution exposure study, EXPOLIS, the air pollution annoyance as perceived at home, workplace and in traffic were surveyed among other study objectives. Overall 1736 randomly drawn 25-55-yr-old subjects participated in six cities (Athens, Basel, Milan, Oxford, Prague and Helsinki). Levels and predictors of individual perceived annoyances from air pollution were assessed. Instead of the usual air pollution concentrations at fixed monitoring sites, this paper compares the measured microenvironment concentrations and personal exposures of PM 2.5 and NO 2 to the perceived annoyance levels. A considerable proportion of the adults surveyed was annoyed by air pollution. Female gender, self-reported respiratory symptoms, downtown living and self-reported sensitivity to air pollution were directly associated with high air pollution annoyance score while in traffic, but smoking status, age or education level were not significantly associated. Population level annoyance averages correlated with the city average exposure levels of PM 2.5 and NO 2. A high correlation was observed between the personal 48-h PM 2.5 exposure and perceived annoyance at home as well as between the mean annoyance at work and both the average work indoor PM 2.5 and the personal work time PM 2.5 exposure. With the other significant determinants (gender, city code, home location) and home outdoor levels the model explained 14% (PM 2.5) and 19% (NO 2) of the variation in perceived air pollution annoyance in traffic. Compared to

  15. The status of pesticide pollution in surface waters (rivers and lakes) of Greece. Part I. Review on occurrence and levels

    International Nuclear Information System (INIS)

    Konstantinou, Ioannis K.; Hela, Dimitra G.; Albanis, Triantafyllos A.

    2006-01-01

    This review evaluates and summarizes the results of long-term research projects, monitoring programs and published papers concerning the pollution of surface waters (rivers and lakes) of Greece by pesticides. Pesticide classes mostly detected involve herbicides used extensively in corn, cotton and rice production, organophosphorus insecticides as well as the banned organochlorines insecticides due to their persistence in the aquatic environment. The compounds most frequently detected were atrazine, simazine, alachlor, metolachlor and trifluralin of the herbicides, diazinon, parathion methyl of the insecticides and lindane, endosulfan and aldrin of the organochlorine pesticides. Rivers were found to be more polluted than lakes. The detected concentrations of most pesticides follow a seasonal variation, with maximum values occurring during the late spring and summer period followed by a decrease during winter. Nationwide, in many cases the reported concentrations ranged in low ppb levels. However, elevated concentrations were recorded in areas of high pesticide use and intense agricultural practices. Generally, similar trends and levels of pesticides were found in Greek rivers compared to pesticide contamination in other European rivers. Monitoring of the Greek water resources for pesticide residues must continue, especially in agricultural regions, because the nationwide patterns of pesticide use are constantly changing. Moreover, emphasis should be placed on degradation products not sufficiently studied so far. - Information on pesticide pollution of surface waters in Greece is reviewed

  16. Modeling of surface dust concentrations using neural networks and kriging

    Science.gov (United States)

    Buevich, Alexander G.; Medvedev, Alexander N.; Sergeev, Alexander P.; Tarasov, Dmitry A.; Shichkin, Andrey V.; Sergeeva, Marina V.; Atanasova, T. B.

    2016-12-01

    Creating models which are able to accurately predict the distribution of pollutants based on a limited set of input data is an important task in environmental studies. In the paper two neural approaches: (multilayer perceptron (MLP)) and generalized regression neural network (GRNN)), and two geostatistical approaches: (kriging and cokriging), are using for modeling and forecasting of dust concentrations in snow cover. The area of study is under the influence of dust emissions from a copper quarry and a several industrial companies. The comparison of two mentioned approaches is conducted. Three indices are used as the indicators of the models accuracy: the mean absolute error (MAE), root mean square error (RMSE) and relative root mean square error (RRMSE). Models based on artificial neural networks (ANN) have shown better accuracy. When considering all indices, the most precision model was the GRNN, which uses as input parameters for modeling the coordinates of sampling points and the distance to the probable emissions source. The results of work confirm that trained ANN may be more suitable tool for modeling of dust concentrations in snow cover.

  17. Natural variability in the surface ocean carbonate ion concentration

    Directory of Open Access Journals (Sweden)

    N. S. Lovenduski

    2015-11-01

    Full Text Available We investigate variability in the surface ocean carbonate ion concentration ([CO32−] on the basis of a~long control simulation with an Earth System Model. The simulation is run with a prescribed, pre-industrial atmospheric CO2 concentration for 1000 years, permitting investigation of natural [CO32−] variability on interannual to multi-decadal timescales. We find high interannual variability in surface [CO32−] in the tropical Pacific and at the boundaries between the subtropical and subpolar gyres in the Northern Hemisphere, and relatively low interannual variability in the centers of the subtropical gyres and in the Southern Ocean. Statistical analysis of modeled [CO32−] variance and autocorrelation suggests that significant anthropogenic trends in the saturation state of aragonite (Ωaragonite are already or nearly detectable at the sustained, open-ocean time series sites, whereas several decades of observations are required to detect anthropogenic trends in Ωaragonite in the tropical Pacific, North Pacific, and North Atlantic. The detection timescale for anthropogenic trends in pH is shorter than that for Ωaragonite, due to smaller noise-to-signal ratios and lower autocorrelation in pH. In the tropical Pacific, the leading mode of surface [CO32−] variability is primarily driven by variations in the vertical advection of dissolved inorganic carbon (DIC in association with El Niño–Southern Oscillation. In the North Pacific, surface [CO32−] variability is caused by circulation-driven variations in surface DIC and strongly correlated with the Pacific Decadal Oscillation, with peak spectral power at 20–30-year periods. North Atlantic [CO32−] variability is also driven by variations in surface DIC, and exhibits weak correlations with both the North Atlantic Oscillation and the Atlantic Multidecadal Oscillation. As the scientific community seeks to detect the anthropogenic influence on ocean carbonate chemistry, these results

  18. Natural variability in the surface ocean carbonate ion concentration

    Science.gov (United States)

    Lovenduski, N. S.; Long, M. C.; Lindsay, K.

    2015-11-01

    We investigate variability in the surface ocean carbonate ion concentration ([CO32-]) on the basis of a~long control simulation with an Earth System Model. The simulation is run with a prescribed, pre-industrial atmospheric CO2 concentration for 1000 years, permitting investigation of natural [CO32-] variability on interannual to multi-decadal timescales. We find high interannual variability in surface [CO32-] in the tropical Pacific and at the boundaries between the subtropical and subpolar gyres in the Northern Hemisphere, and relatively low interannual variability in the centers of the subtropical gyres and in the Southern Ocean. Statistical analysis of modeled [CO32-] variance and autocorrelation suggests that significant anthropogenic trends in the saturation state of aragonite (Ωaragonite) are already or nearly detectable at the sustained, open-ocean time series sites, whereas several decades of observations are required to detect anthropogenic trends in Ωaragonite in the tropical Pacific, North Pacific, and North Atlantic. The detection timescale for anthropogenic trends in pH is shorter than that for Ωaragonite, due to smaller noise-to-signal ratios and lower autocorrelation in pH. In the tropical Pacific, the leading mode of surface [CO32-] variability is primarily driven by variations in the vertical advection of dissolved inorganic carbon (DIC) in association with El Niño-Southern Oscillation. In the North Pacific, surface [CO32-] variability is caused by circulation-driven variations in surface DIC and strongly correlated with the Pacific Decadal Oscillation, with peak spectral power at 20-30-year periods. North Atlantic [CO32-] variability is also driven by variations in surface DIC, and exhibits weak correlations with both the North Atlantic Oscillation and the Atlantic Multidecadal Oscillation. As the scientific community seeks to detect the anthropogenic influence on ocean carbonate chemistry, these results will aid the interpretation of trends

  19. The concentration-response relation between air pollution and daily deaths.

    Science.gov (United States)

    Schwartz, J; Ballester, F; Saez, M; Pérez-Hoyos, S; Bellido, J; Cambra, K; Arribas, F; Cañada, A; Pérez-Boillos, M J; Sunyer, J

    2001-01-01

    Studies on three continents have reported associations between various measures of airborne particles and daily deaths. Sulfur dioxide has also been associated with daily deaths, particularly in Europe. Questions remain about the shape of those associations, particularly whether there are thresholds at low levels. We examined the association of daily concentrations of black smoke and SO(2) with daily deaths in eight Spanish cities (Barcelona, Bilbao, Castellón, Gijón, Oviedo, Valencia, Vitoria, and Zaragoza) with different climates and different environmental and social characteristics. We used nonparametric smoothing to estimate the shape of the concentration-response curve in each city and combined those results using a metasmoothing technique developed by Schwartz and Zanobetti. We extended their method to incorporate random variance components. Black smoke had a nearly linear association with daily deaths, with no evidence of a threshold. A 10 microg/m(3) increase in black smoke was associated with a 0.88% increase in daily deaths (95% confidence interval, 0.56%-1.20%). SO(2) had a less plausible association: Daily deaths increased at very low concentrations, but leveled off and then decreased at higher concentrations. These findings held in both one- and two-pollutant models and held whether we optimized our weather and seasonal model in each city or used the same smoothing parameters in each city. We conclude that the association with particle levels is more convincing than for SO(2), and without a threshold. Linear models provide an adequate estimation of the effect of particulate air pollution on mortality at low to moderate concentrations. PMID:11675264

  20. Predicting microbial pollution concentrations in UK rivers in response to land use change.

    Science.gov (United States)

    Hampson, Danyel; Crowther, John; Bateman, Ian; Kay, David; Posen, Paulette; Stapleton, Carl; Wyer, Mark; Fezzi, Carlo; Jones, Philip; Tzanopoulos, Joseph

    2010-09-01

    The Water Framework Directive has caused a paradigm shift towards the integrated management of recreational water quality through the development of drainage basin-wide programmes of measures. This has increased the need for a cost-effective diagnostic tool capable of accurately predicting riverine faecal indicator organism (FIO) concentrations. This paper outlines the application of models developed to fulfil this need, which represent the first transferrable generic FIO models to be developed for the UK to incorporate direct measures of key FIO sources (namely human and livestock population data) as predictor variables. We apply a recently developed transfer methodology, which enables the quantification of geometric mean presumptive faecal coliforms and presumptive intestinal enterococci concentrations for base- and high-flow during the summer bathing season in unmonitored UK watercourses, to predict FIO concentrations in the Humber river basin district. Because the FIO models incorporate explanatory variables which allow the effects of policy measures which influence livestock stocking rates to be assessed, we carry out empirical analysis of the differential effects of seven land use management and policy instruments (fiscal constraint, production constraint, cost intervention, area intervention, demand-side constraint, input constraint, and micro-level land use management) all of which can be used to reduce riverine FIO concentrations. This research provides insights into FIO source apportionment, explores a selection of pollution remediation strategies and the spatial differentiation of land use policies which could be implemented to deliver river quality improvements. All of the policy tools we model reduce FIO concentrations in rivers but our research suggests that the installation of streamside fencing in intensive milk producing areas may be the single most effective land management strategy to reduce riverine microbial pollution. Copyright © 2010

  1. Convective transport of pollutants from eastern Colorado concentrated animal feeding operations into the Rocky Mountains

    Science.gov (United States)

    Pina, A.; Denning, A.; Schumacher, R. S.

    2013-12-01

    As the population of the urban corridor along the eastern Front Range grows at an unprecedented rate, concern about pollutant transport into the Rocky Mountains is on the rise. The confluence of mountain meteorology and major pollution sources conspire to transport pollutants across the Front Range, especially nitrogen species (NH3, NH4+, orgN, and NO3-) from concentrated animal feeding operations and urban regions, into the Rocky Mountains. The Rocky Mountains have coarse-textured soils which disallow the uptake nitrogen-rich precipitation, allowing most ions in precipitation to reach, be stored in, and eutrophicate alpine terrestrial and aquatic ecosystems. The focus of this study was to examine the meteorological conditions in which atmospheric deposition of pollutants at two mountain sites was anomalously high due to convective transport. We looked at 19 years (1994-2013) of precipitation and wet deposition data from two National Atmospheric Deposition Program (NAPD) sites in the Rocky Mountains: Beaver Meadows (CO19) and Loch Vale (CO98). Loch Vale (3159 m) and Beaver Meadows (2477 m) are located approximately 11 km apart but differ in height by 682 m resulting in different seasonal precipitation composition and totals. The Advanced Research WRF model was used to simulate the meteorology at a high resolution for the progression of the upslope event that led to high nitrogen deposition in the Rocky Mountains. Data from the North American Regional Reanalysis (NARR) was used to observe and verify synoptic conditions produced by the WRF model that influenced the high-deposition events. Dispersion plumes showed a mesoscale mountain circulation caused by differential heating between mountains-tops and the plains was the main driver of the westward convective transport towards the mountains. Additionally and unexpectedly, a lee trough and high precipitable water values associated with a cold front played significant roles in the nitrogen deposition into the Rocky

  2. Effect of the Diurnal Variation of the Convective Boundary Layer Height over Metro Manila on Pollutant Concentration

    Directory of Open Access Journals (Sweden)

    Genelita Tubal

    2002-06-01

    Full Text Available Air pollutants are dispersed throughout a very thin layer of the atmosphere called the boundary layer (BL, and concentrations would be influenced by the thickness of the BL. A monostatic, biaxial, vertically-pointing Mie Scattering 532 nm Nd: YAG lidar was used to observe the development of the daytime BL over Metro Manila in May 1999. The data profiles were background-subtracted, energy-normalized, and range-corrected; 20,000 profiles (30-32 minute period files were arranged in arrays in time sequential order. A MatLab program with color enhancement capability was developed to display the range-time indicator (RTI image to visualize the BL.The convective BL height developed with a general pattern; it increased gradually in the early morning, rapidly from mid-morning until noontime, then slowly reaching its maximum height in the early afternoon. (The Maximum height reached by the BL from 1-4 May 1999 was 1635 m. BL height is maintained or lowered very slowly from mid-afternoon until sunset.The BL grew higher when the surface temperature and solar radiation received was greater. Fair-weather active clouds inhibited the growth of the BL. When the relative humidity was higher, the base of the fair-weather cloud field was lower; therefore, the mean BL height was also lower. Prolonged sea breeze modified the convective BL by creating a much lower BL that when there was no sea breeze.Around 75% of the total suspended particulates (TSP in Metro Manila comes from traffic emissions. Traffic volume over most part of Metro Manila including the main thoroughfares near the lidar site, peaks at around 09:00 Local Standard Time (LST and between17:00 – 18:00 LST, although traffic volume is lower than at 09:00 LST. The traffic volume reduces to 80% from its morning peak at around noontime. The morning peak of the pollution concentration occurred earlier that that of the traffic. This could be due to the fact that the BL before 09:00 LST was much lower than

  3. Surface gas pollutants in Lhasa, a highland city of Tibet - current levels and pollution implications

    Science.gov (United States)

    Ran, L.; Lin, W. L.; Deji, Y. Z.; La, B.; Tsering, P. M.; Xu, X. B.; Wang, W.

    2014-10-01

    Through several years of development, the city of Lhasa has become one of the most populated and urbanized areas on the highest plateau in the world. In the process of urbanization, current and potential air quality issues have been gradually concerned. To investigate the current status of air pollution in Lhasa, various gas pollutants including NOx, CO, SO2, and O3, were continuously measured from June 2012 to May 2013 at an urban site (29.40° N, 91.08° E, 3650 m a.s.l.). The seasonal variations of primary gas pollutants exhibited a peak from November to January with a large variability. High mixing ratios of primary trace gases almost exclusively occurred under low wind speed and showed no distinct dependence on wind direction, implying local urban emissions to be predominant. A comparison of NO2, CO, and SO2 mixing ratios in summer between 1998 and 2012 indicated a significant increase in emissions of these gas pollutants and a change in their intercorrelations, as a result of a substantial growth in the demand of energy consumption using fossil fuels instead of previously widely used biomass. The pronounced diurnal double peaks of primary trace gases in all seasons suggested automobile exhaust to be a major emission source in Lhasa. The secondary gas pollutant O3 displayed an average diurnal cycle of a shallow flat peak for about 4-5 h in the afternoon and a minimum in the early morning. Nighttime O3 was sometimes completely consumed by the high level of NOx. Seasonally, the variations of O3 mixing ratios displayed a low valley in winter and a peak in spring. In autumn and winter, transport largely contributed to the observed O3 mixing ratios, given its dependence on wind speed and wind direction, while in spring and summer photochemistry played an important role. A more efficient buildup of O3 mixing ratios in the morning and a higher peak in the afternoon was found in summer 2012 than in 1998. An enhancement in O3 mixing ratios would be expected in the

  4. Dust, Pollution, and Biomass Burning Aerosols in Asian Pacific: A Column Surface/Satellite Perspective

    Science.gov (United States)

    Tsay, Si-Chee; Lau, William K. M. (Technical Monitor)

    2002-01-01

    Many recent field experiments are designed to study the compelling variability in spatial and temporal scale of both pollution-derived and naturally occurring aerosols, which often exist in high concentrations over eastern/southeastern Asia and along the rim of the western Pacific. For example, the phase-I of ACE-Asia was conducted from March-May 2001 in the vicinity of the Gobi desert, East Coast of China, Yellow Sea, Korea, and Japan, along the pathway of Kosa (severe events that blanket East Asia with yellow desert dust, peaked in the Spring season). Asian dust typically originates in desert areas far from polluted urban regions. During transport, dust layers can interact with anthropogenic sulfate and soot aerosols from heavily polluted urban areas. Springtime is also the peak season for biomass burning in southeastern Asia. Added to the complex effects of clouds and natural marine aerosols, dust particles reaching the marine environment can have drastically different properties than those from the source. Thus, understanding the unique temporal and spatial variations of Asian aerosols is of special importance in regional-to-global climate issues such as radiative forcing, the hydrological cycle, and primary biological productivity in the mid-Pacific Ocean. During ACE-Asia we have measured continuously aerosol physical/optical/radiative properties, column precipitable water amount, and surface reflectivity over homogeneous areas from surface. The inclusion of flux measurements permits the determination of aerosol radiative flux in addition to measurements of loading and optical depth. At the time of the Terra/MODIS (Moderate Resolution Imaging Spectroradiometer), SeaWiFS (Sea-viewing Wide Field-of-view Sensor), TOMS (Total Ozone Mapping Spectrometer) and other satellite overpasses, these ground-based observations can provide valuable data to compare with satellite retrievals over land. A column satellite-surface perspective of Asian aerosols will be presented

  5. Heavy metal concentration of settled surface dust in residential building

    International Nuclear Information System (INIS)

    Nor Aimi abdul Wahab; Fairus Muhamad Darus; Norain Isa; Siti Mariam Sumari; Nur Fatihah Muhamad Hanafi

    2012-01-01

    The concentrations of heavy metals (Cu, Ni, Pb and Zn) in settled surface dust were collected from nine residential buildings in different areas in Seberang Prai Tengah District, Pulau Pinang. The samples of settled surface dust were collected in 1 m 2 area by using a polyethylene brush and placed in the dust pan by sweeping the living room floor most accessible to the occupants. Heavy metals concentrations were determined by using inductively coupled plasma optical emission spectrometer (ICP-OES) after digestion with nitric acid and sulphuric acid. The results show that the range of heavy metals observed in residential buildings at Seberang Prai Tengah were in the range of 2.20-14.00 mg/ kg, 1.50-32.70 mg/ kg, 1.50-76.80 mg/ kg and 14.60-54.40 mg/ kg for Cu, Ni, Pb and Zn respectively. The heavy metal concentration in the investigated areas followed the order: Pb > Zn > Ni > Cu. Statistical analysis indicates significant correlation between all the possible pairs of heavy metal. The results suggest a likely common source for the heavy metal contamination, which could be traced most probably to vehicular emissions, street dust and other related activities. (author)

  6. Spatial analysis of concentrations of multiple air pollutants using NASA DISCOVER-AQ aircraft measurements: Implications for exposure assessment.

    Science.gov (United States)

    Lee, Hyung Joo; Chatfield, Robert B; Bell, Michelle L

    2018-01-01

    In recent years, multipollutant approaches have been employed to investigate the association with health outcomes to better represent real-world conditions than more traditional analysis that considers a single pollutant. With regard to the exposure assessment of a mixture of air pollutants, it is critical to understand the spatial variability in multipollutant relations in order to assess their potential health implications. In this study, we investigated the spatial relations of multiple pollutant concentrations (i.e., NO x , NO y , black carbon, carbon monoxide, acetaldehyde, formaldehyde, toluene, xylenes/ethylbenzene, ozone, water-soluble organic carbon, and aerosol extinction) observed from the P-3B aircraft in the 2011 NASA field campaign in Baltimore/Washington D.C. areas during July 2011. The between-pollutant Pearson correlations and Z-scores (calculated from log-transformed concentrations) between near-highways and non-highways and between near-urban centers and non-urban centers varied by pollutant pair and space. We found generally lower correlations between NO x and other pollutants for near-highways (average r = 0.36) than for non-highways (average r = 0.41) and also for non-urban centers (average r = 0.37) than for near-urban centers (average r = 0.41). This indicated that the temporal associations between NO x and health outcomes might be less affected by other pollutants, which were also related to same health outcomes, for near-highways and non-urban centers. The analysis of between-pollutant Z-scores showed varying spatial relations for popular traffic-related pollutants with the Z-score differences of 0.43 (NO x -carbon monoxide), 0.29 (NO x -black carbon), and 0.17 (black carbon-carbon monoxide) between near-highways and non-highways. This result exhibited heterogeneous traffic-related pollutant mixtures with the proximity to highways, potentially leading to the diverse extent of health associations. Furthermore, a mixed effects model

  7. A new air quality monitoring and early warning system: Air quality assessment and air pollutant concentration prediction.

    Science.gov (United States)

    Yang, Zhongshan; Wang, Jian

    2017-10-01

    Air pollution in many countries is worsening with industrialization and urbanization, resulting in climate change and affecting people's health, thus, making the work of policymakers more difficult. It is therefore both urgent and necessary to establish amore scientific air quality monitoring and early warning system to evaluate the degree of air pollution objectively, and predict pollutant concentrations accurately. However, the integration of air quality assessment and air pollutant concentration prediction to establish an air quality system is not common. In this paper, we propose a new air quality monitoring and early warning system, including an assessment module and forecasting module. In the air quality assessment module, fuzzy comprehensive evaluation is used to determine the main pollutants and evaluate the degree of air pollution more scientifically. In the air pollutant concentration prediction module, a novel hybridization model combining complementary ensemble empirical mode decomposition, a modified cuckoo search and differential evolution algorithm, and an Elman neural network, is proposed to improve the forecasting accuracy of six main air pollutant concentrations. To verify the effectiveness of this system, pollutant data for two cities in China are used. The result of the fuzzy comprehensive evaluation shows that the major air pollutants in Xi'an and Jinan are PM 10 and PM 2.5 respectively, and that the air quality of Xi'an is better than that of Jinan. The forecasting results indicate that the proposed hybrid model is remarkably superior to all benchmark models on account of its higher prediction accuracy and stability. Copyright © 2017 Elsevier Inc. All rights reserved.

  8. Probabilistic risk assessment of insecticide concentrations in agricultural surface waters: a critical appraisal.

    Science.gov (United States)

    Stehle, Sebastian; Knäbel, Anja; Schulz, Ralf

    2013-08-01

    Due to the specific modes of action and application patterns of agricultural insecticides, the insecticide exposure of agricultural surface waters is characterized by infrequent and short-term insecticide concentration peaks of high ecotoxicological relevance with implications for both monitoring and risk assessment. Here, we apply several fixed-interval strategies and an event-based sampling strategy to two generalized and two realistic insecticide exposure patterns for typical agricultural streams derived from FOCUS exposure modeling using Monte Carlo simulations. Sampling based on regular intervals was found to be inadequate for the detection of transient insecticide concentrations, whereas event-triggered sampling successfully detected all exposure incidences at substantially lower analytical costs. Our study proves that probabilistic risk assessment (PRA) concepts in their present forms are not appropriate for a thorough evaluation of insecticide exposure. Despite claims that the PRA approach uses all available data to assess exposure and enhances risk assessment realism, we demonstrate that this concept is severely biased by the amount of insecticide concentrations below detection limits and therefore by the sampling designs. Moreover, actual insecticide exposure is of almost no relevance for PRA threshold level exceedance frequencies and consequential risk assessment outcomes. Therefore, we propose a concept that features a field-relevant ecological risk analysis of agricultural insecticide surface water exposure. Our study quantifies for the first time the environmental and economic consequences of inappropriate monitoring and risk assessment concepts used for the evaluation of short-term peak surface water pollutants such as insecticides.

  9. Averaging of diffusing contaminant concentrations in atmosphere surface layer

    International Nuclear Information System (INIS)

    Ivanov, E.A.; Ramzina, T.V.

    1985-01-01

    Calculations permitting to average concentration fields of diffusing radioactive contaminant coming from the NPP exhaust stack in the atmospheric surface layer are given. Formulae of contaminant concentration field calculation are presented; it depends on the average wind direction value (THETA) for time(T) and stability of this direction (σsub(tgTHETA) or σsub(THETA)). Probability of wind direction deviation from the average value for time T is satisfactory described by the Gauss law. With instability increase in the atmosphere σ increases, when wind velocity increasing the values of σ decreases for all types of temperature gradients. Nonuniformity of σ value dependence on averaging time T is underlined, that requires accurate choice of σsub(tgTHETA) and σsub(THETA) parameters in calculations

  10. Contribution of ship emissions to the concentration and deposition of air pollutants in Europe

    Directory of Open Access Journals (Sweden)

    S. Aksoyoglu

    2016-02-01

    Full Text Available Emissions from the marine transport sector are one of the least-regulated anthropogenic emission sources and contribute significantly to air pollution. Although strict limits were introduced recently for the maximum sulfur content in marine fuels in the SECAs (sulfur emission control areas and in EU ports, sulfur emissions outside the SECAs and emissions of other components in all European maritime areas have continued to increase in the last two decades. We have used the air quality model CAMx (Comprehensive Air Quality Model with Extensions with and without ship emissions for the year 2006 to determine the effects of international shipping on the annual as well as seasonal concentrations of ozone, primary and secondary components of PM2.5, and the dry and wet deposition of nitrogen and sulfur compounds in Europe. The largest changes in pollutant concentrations due to ship emissions were predicted for summer. Concentrations of particulate sulfate increased due to ship emissions in the Mediterranean (up to 60 %, the English Channel and the North Sea (30–35 %, while increases in particulate nitrate levels were found especially in the north, around the Benelux area (20 %, where there were high NH3 land-based emissions. Our model results showed that not only are the atmospheric concentrations of pollutants affected by ship emissions, but also depositions of nitrogen and sulfur compounds increase significantly along the shipping routes. NOx emissions from the ships, especially in the English Channel and the North Sea, cause a decrease in the dry deposition of reduced nitrogen at source regions by moving it from the gas phase to the particle phase which then contributes to an increase in the wet deposition at coastal areas with higher precipitation. In the western Mediterranean region, on the other hand, model results show an increase in the deposition of oxidized nitrogen (mostly HNO3 due to the ship traffic. Dry deposition of SO2 seems to

  11. Blood lead concentrations in wild birds from a polluted mining region at Villa de La Paz, San Luis Potosi, Mexico.

    Science.gov (United States)

    Chapa-Vargas, Leonardo; Mejia-Saavedra, Jose J; Monzalvo-Santos, Karina; Puebla-Olivares, Fernando

    2010-01-01

    This investigation was undertaken to determine the concentrations of lead in bird blood samples from a mining region in central Mexico and to compare concentrations among several different feeding guilds. The study took place in the Mexican state of San Luis Potosi in a region known as "Villa de la Paz." This is one of the most intensely exploited mining regions in central Mexico and has been actively mined for over four centuries. Lead concentrations from bird blood samples taken from four polluted sites were significantly higher than those from a control, unpolluted site (F = 6.3, P birds from a highly polluted site were higher than those from a site that has intermediate pollution levels (P birds had significantly lower lead concentrations compared to granivores, frugivores-insectivores, and omnivores (F = 4.86, P = 0.004), and a large proportion of all individuals had blood lead concentrations indicative of low, sub-lethal toxic effects. Finally, in two polluted sites, remarkably small numbers of insectivore-frugivores, and granivores were trapped, and in one polluted site a large number of insectivores was trapped (X(2) = 29.9, P = 0.03), and no differences in proportions of migrants and non-migrants were found among sampling sites (X(2) = 0.6, P = 0.96). To date, it has not been determined to what extent constant exposure to these levels of pollution can influence health at the individual level, lifespan, and, therefore, population demography of birds from this region.

  12. Surfaces: processing, coating, decontamination, pollution, etc. Surface mastering to prevent component corrosion; Surfaces: traitement, revetements, decontamination, pollution, etc. Maitrise de la surface pour prevenir la corrosion des composants

    Energy Technology Data Exchange (ETDEWEB)

    Foucault, M. [Departement Corrosion Chimie, AREVA Centre Technique, BP 181, 71205 Le Creusot (France)

    2012-07-01

    In the primary and secondary circuits of nuclear Pressurized Water Reactors, AREVA uses several nickel-based alloys or austenitic stainless steels for the manufacture of safety components. The experience feedback of the last twenty years allows us to point out the major role hold by the component surface state in their life duration. In this paper, we present four examples of problem encountered and solved by a surface study and the definition and implementation of processes for the surface control of the repaired components. Then, we propose some ideas about the present needs in term of analysis means to improve the surface knowledge and control of the manufactured components. (author)

  13. Pollutant threshold concentration determination in marine ecosystems using an ecological interaction endpoint

    International Nuclear Information System (INIS)

    Wang, Changyou; Liang, Shengkang; Guo, Wenting; Yu, Hua; Xing, Wenhui

    2015-01-01

    The threshold concentrations of pollutants are determined by extrapolating single-species effect data to community-level effects. This assumes the most sensitive endpoint of the life cycle of individuals and the species sensitivity distribution from single-species toxic effect tests, thus, ignoring the ecological interactions. The uncertainties due to this extrapolation can be partially overcome using the equilibrium point of a customized ecosystem. This method incorporates ecological interactions and integrates the effects on growth, survival, and ingestion into a single effect measure, the equilibrium point excursion in the customized ecosystem, in order to describe the toxic effects on plankton. A case study showed that the threshold concentration of copper calculated with the endpoint of the equilibrium point was 10 μg L −1 , which is significantly different from the threshold calculated with a single-species endpoint. The endpoint calculated using this method provides a more relevant measure of the ecological impact than any single individual-level endpoint. - Highlights: • Ecotoxicological effect of exposure to copper was tested on a customized ecosystem. • Equilibrium point of biomasses in the customized ecosystem was used as an endpoint. • Exposure–response relationship in a community level was built on equilibrium point. • A threshold concentration incorporating ecological interactions was derived. - The equilibrium biomass incorporating ecological interactions in a customized ecosystem was used as an endpoint to calculate the threshold concentration at a community level

  14. Estimates of surface methane emissions over Europe using observed surface concentrations and the FLEXPART trajectory model

    Science.gov (United States)

    Weaver, C. J.; Kiemle, C.; Kawa, S. R.; Aalto, T.; Necki, J.; Steinbacher, M.; Arduini, J.; Apadula, F.; Berkhout, H.; Hatakka, J.; O'Doherty, S.

    2013-12-01

    We use surface methane observations from nine European ground stations, and the FLEXPART Lagrangian transport model to obtain surface methane emissions for 2010. Our inversion shows the strongest emissions from the Netherlands and the coal mines in Upper Silesia Poland. This is qualitatively consistent with the EDGAR surface flux inventory. We also report significant surface fluxes from wetlands in southern Finland during July and August and reduced wetland fluxes later in the year. Our simulated methane surface concentration captures at least half of the daily variability in the observations, suggesting that the transport model is correctly simulating the regional transport pathways over Europe. We also use our trajectory model to determine whether future space-based remote sensing instruments (MERLIN) will be able to detect both natural and anthropogenic changes in the surface flux strengths.

  15. Surface sediment properties and heavy metal pollution assessment in the Shallow Sea Wetland of the Liaodong Bay, China.

    Science.gov (United States)

    Wang, Jin; Ye, Siyuan; Laws, Edward A; Yuan, Hongming; Ding, Xigui; Zhao, Guangming

    2017-07-15

    Liaodong Bay, a semi-enclosed bay located in northeastern China, is impacted by the discharges of five rivers. We analyzed 100 surface sediment samples from the Shallow Sea Wetland of Liaodong Bay for grain size and concentrations of organic carbon (Corg) and heavy metals. The ranges of the heavy metal concentrations were 2.32-17μg/g (As), 0.025-1.03μg/g (Cd), 18.9-131μg/g (Cr), 4.6-36.1μg/g (Cu), 0.012-0.29μg/g (Hg), 13.7-33.9μg/g (Pb), and 17.4-159μg/g (Zn). Pollution assessments revealed that some stations were moderately to highly polluted with As, Cd, and Hg. Severe pollution was apparent in the Xiaoling River estuary; lower concentrations of heavy metals were observed in other river mouths, where the sediments were more coarse. The distributions of the heavy metals were closely associated with Corg and grain size. Copyright © 2017. Published by Elsevier Ltd.

  16. Concentration, enrichment and distribution of heavy metals in surface sediments of the Tangier Bay, Morocco

    Directory of Open Access Journals (Sweden)

    María Rocío Rodríguez-Barroso

    2010-11-01

    Full Text Available The distribution, enrichment, and accumulation of heavy metals in the surface sediments of the Tangier Bay, Morocco, were investigated. Surface sediment samples from eleven locations in the Bay of Tangier were collected in 2007 and characterized for grain size, organic matter and metal content (e.g. Fe, Mn, Cr, Cu, Ni, Pb, Zn and Cd. The evaluation of the heavy metal contamination status of the bay showed minor enrichment by the enrichment factors (EF calculation, corroborated by the metal pollution index (MPI. The results of a Pearson correlation showed high positive correlations among organic carbon and most metals (0.788 < r < 0.939 and cluster analysis grouped the stations inside the harbour (stations 1, 10 and 9 and in the vicinity of the principal rivers in the bay (stations 3 and 11, which showed the highest concentrations of metal content. The main sources of contamination are domestic and industrial effluents, which arise due to the lack of sewage treatment. However, these areas could not be classified as polluted when the data were compared with sediment quality guidelines (USEPA, 1997.

  17. Sewage water pollutants removal efficiency correlates to the concentration gradient of amendments

    International Nuclear Information System (INIS)

    Bhatti, Z.A.; Mahmood, Q.; Raja, I.A.

    2009-01-01

    Three coagulants viz. alum, FeCl/sub 3/ and Moringa oleifera seed extract were compared for treating municipal wastewater. The wastewater samples were collected from a drain near the Murree Road in Abbottabad city. The initial treatment depicted that alum was a suitable coagulant, while the other two caused color development and increased chemical oxygen demand in the effluent. Subsequently, wastewater samples were treatment with graded concentrations (4 32 mg.L/sup -1/ of alum in batch series, and shacked at 600-620 rpm for five minutes. The treated samples were analyzed for various water quality parameters to examine the effective coagulation and flocculation process in the wastewater. There was an increase in TDS and electrical conductivity with the increasing levels of alum above the optimized values (22 to 30 mg L/sup -1/). The process primary treatment strategy of wastewater treatment with alum is suitable for reducing the pollutants load in the sewer system. (author)

  18. Prediction of air pollutant concentration based on sparse response back-propagation training feedforward neural networks.

    Science.gov (United States)

    Ding, Weifu; Zhang, Jiangshe; Leung, Yee

    2016-10-01

    In this paper, we predict air pollutant concentration using a feedforward artificial neural network inspired by the mechanism of the human brain as a useful alternative to traditional statistical modeling techniques. The neural network is trained based on sparse response back-propagation in which only a small number of neurons respond to the specified stimulus simultaneously and provide a high convergence rate for the trained network, in addition to low energy consumption and greater generalization. Our method is evaluated on Hong Kong air monitoring station data and corresponding meteorological variables for which five air quality parameters were gathered at four monitoring stations in Hong Kong over 4 years (2012-2015). Our results show that our training method has more advantages in terms of the precision of the prediction, effectiveness, and generalization of traditional linear regression algorithms when compared with a feedforward artificial neural network trained using traditional back-propagation.

  19. assessment of concentration of air pollutants using analytical and numerical solution of the atmospheric diffusion equation

    International Nuclear Information System (INIS)

    Esmail, S.F.H.

    2011-01-01

    The mathematical formulation of numerous physical problems a results in differential equations actually partial or ordinary differential equations.In our study we are interested in solutions of partial differential equations.The aim of this work is to calculate the concentrations of the pollution, by solving the atmospheric diffusion equation(ADE) using different mathematical methods of solution. It is difficult to solve the general form of ADE analytically, so we use some assumptions to get its solution.The solutions of it depend on the eddy diffusivity profiles(k) and the wind speed u. We use some physical assumptions to simplify its formula and solve it. In the present work, we solve the ADE analytically in three dimensions using Green's function method, Laplace transform method, normal mode method and these separation of variables method. Also, we use ADM as a numerical method. Finally, comparisons are made with the results predicted by the previous methods and the observed data.

  20. Modeling of air pollutant concentrations in an industrial region of Turkey.

    Science.gov (United States)

    Tuygun, Gizem Tuna; Altuğ, Hicran; Elbir, Tolga; Gaga, Eftade E

    2017-03-01

    The hourly SO 2 and PM 10 concentrations in ambient air of the Kutahya city located at the western part of Turkey have exceeded the air quality limits in winter months since several years. The region has major industrial plants including lignite-fired power plants and open-cast mining activities, residential areas, and traffic sources. To obtain and quantify the sector-wise anthropogenic emissions and spatial distribution of the major pollutants including SO 2 , NO x , PM 10 , and CO, a comprehensive emission inventory with 1-km spatial resolution was prepared for the year of 2014, and the AERMOD dispersion model was used to predict ambient air concentrations in a domain of 140 km by 110 km. Validation of the model results was also done referring to in situ routine measurements at two monitoring stations located in the study area. Total emissions of SO 2 , PM 10 , NO x , and CO in the study area were calculated as 64,399, 9770, 24,627, and 29,198 tons/year, respectively. The results showed that industrial plants were the largest sources of SO 2 , NO x , and PM 10 emissions, while residential heating and road traffic were the most contributing sectors for CO emissions. Three major power plants in the region with total annual lignite consumption of 10 million tons per year were main sources of high SO 2 concentrations, while high PM 10 concentrations mainly originated from two major open-cast lignite mines. Major contributors of high NO x and CO concentrations were traffic including highways and urban streets, and residential heating with high lignite consumption in urban areas. Results of the dispersion model run with the emission inventory resulted in partially high index of agreement (0.75) with SO 2 measured in the urban station within the modeled area.

  1. Photocatalysis of low-concentration gaseous organic pollutants over electrospun iron-doped titanium dioxide nanofibers

    Science.gov (United States)

    Chun, Ho-Hwan; Lee, Joon Yeob; Jo, Wan-Kuen

    2013-11-01

    In this study, iron-doped titania (Fe-TiO2) nanoparticles were prepared and then coupled to a polymer material as a support to synthesize Fe-TiO2 nanofibers for photocatalytic degradation of gaseous pollutants (benzene, toluene, ethyl benzene, and o-xylene (BTEX)) at environmental sub-ppm levels. The characteristics of as-prepared photocatalysts were determined by SEM, XRD, and FTIR analyses. Spectral analysis of the as-prepared photocatalysts revealed that they were closely associated with the characteristics of Fe ions for Fe-TiO2 nanofibers. The photocatalytic degradation efficiencies (PDEs) of BTEX determined via Fe-TiO2 nanofibers varied with the ratios of Fe to Ti, suggesting the presence of an optimal Fe-to-Ti ratio. In addition, the PDEs of BTEX determined via two Fe-TiO2 nanofibers with low Fe-to-Ti ratios (0.001 and 0.004) were higher than those obtained from the undoped Fe-TiO2 nanofibers, whereas those of the other two Fe-TiO2 nanofibers with high Fe-to-Ti ratios (0.008 and 0.012) were lower. The average PDEs of BTEX decreased from 34 to 9%, 68 to 28%, 83 to 45%, and 90 to 55%, respectively, as the stream flow rates increased from 1 to 4 L min-1. These values also decreased with increasing initial concentration (IC). Specifically, at the lowest IC of 0.1 ppm, the average PDEs of BTEX were 33, 68, 83, and 91%, respectively, while they were 5, 8, 12, and 23%, respectively, at the highest IC of 2.0 ppm. Similarly, the PDEs of BTEX decreased significantly as the RH increased. Overall, the electrospun Fe-TiO2 nanofibers could be used to effectively decompose low-concentration gaseous organic pollutants when operational conditions were optimized.

  2. Trace Element Concentrations in Tree Leaves and Lichen Collected Along a Metal Pollution Gradient Near Olkusz (Southern Poland).

    Science.gov (United States)

    Zakrzewska, Marta; Klimek, Beata

    2018-02-01

    The aim of the study was to assess the metal pollution in the vicinity of the Bukowno smelter near Olkusz in southern Poland. Birch and oak leaves, pine needles and a lichen Hypogymnia physodes, overgrowing pine bark were collected at stands at different distances from the smelter and analysed for cadmium (Cd), copper (Cu), lead (Pb) and zinc (Zn) content. Concentrations of metals in the lichen were usually higher than in the tree leaves/needles and decreased with distance from the smelter, apart from the Cu content. The strongest correlation was noticed between Cd and Pb concentrations, which indicates a common pollution source (the smelter). Our results show that birch leaves can be potentially useful as a bioindicator of Zn air pollution since this species was shown to accumulate high amounts of zinc, related to environmental pollution with that metal, in their leaves.

  3. Dispersion, Speciation, and Pollution Assessment of Heavy Metals Pb and Zn in Surface Sediment from Disturbed Ecosystem of Jeneberang Waters

    Science.gov (United States)

    Najamuddin; Surahman

    2017-10-01

    Surface sediments were collected from seventeen stations in Jeneberang waters (riverine, estuarine, and marine). Lead (Pb) and zinc (Zn) concentrations were determined by atomic absorption spectrometry, and the speciation of metals was obtained by a sequential extraction procedure. Dispersion of Pb and Zn were found higher in the riverine and marine samples than the estuarine samples. Following speciation, the metals were found similar composition of fraction in the riverine and estuarine samples but any different in the marine samples. The results indicated that there is a change of dispersion pattern and speciation composition of metals due to the presence of the dam that lies at the boundary between the estuary and the river. The toxicity unit was indicated low toxicity level; pollution level was in weakly to moderately polluted while the aquatic environment risk attributed were no risky to light risk.

  4. Evaluation of the relation between groundwater pollution and the pollutant load on surface waters

    NARCIS (Netherlands)

    Groenendijk, P.; Roest, C.W.J.

    1996-01-01

    The importance of the relation between groundwater and surface water is demonstrated by the impact of water quality standards on permissible nitrogen losses at farm level. The effects of the intended fertilization reduction measures on agricultural production justify a thorough examination of the

  5. How Inefficient Are Nutrient Application Limits? A Dynamic Analysis of Groundwater Nitrate Pollution from Concentrated Animal Feeding Operations

    OpenAIRE

    Wang, J; Baerenklau, KA

    2015-01-01

    Animal waste from concentrated animal feeding operations (CAFOs) is a significant contributor to nitrate contamination of groundwater. To evaluate the cost-effectiveness of alternative policies for controlling nitrate pollution at both the field and farm level, this article utilizes a structural dynamic model of a representative CAFO. The model accounts for herd management, manure handling systems, crop rotations, water sources, irrigation systems, waste disposal options, and pollutant emissi...

  6. Quantifying the impact of current and future concentrations of air pollutants on respiratory disease risk in England.

    Science.gov (United States)

    Pannullo, Francesca; Lee, Duncan; Neal, Lucy; Dalvi, Mohit; Agnew, Paul; O'Connor, Fiona M; Mukhopadhyay, Sabyasachi; Sahu, Sujit; Sarran, Christophe

    2017-03-27

    Estimating the long-term health impact of air pollution in a spatio-temporal ecological study requires representative concentrations of air pollutants to be constructed for each geographical unit and time period. Averaging concentrations in space and time is commonly carried out, but little is known about how robust the estimated health effects are to different aggregation functions. A second under researched question is what impact air pollution is likely to have in the future. We conducted a study for England between 2007 and 2011, investigating the relationship between respiratory hospital admissions and different pollutants: nitrogen dioxide (NO 2 ); ozone (O 3 ); particulate matter, the latter including particles with an aerodynamic diameter less than 2.5 micrometers (PM 2.5 ), and less than 10 micrometers (PM 10 ); and sulphur dioxide (SO 2 ). Bayesian Poisson regression models accounting for localised spatio-temporal autocorrelation were used to estimate the relative risks (RRs) of pollution on disease risk, and for each pollutant four representative concentrations were constructed using combinations of spatial and temporal averages and maximums. The estimated RRs were then used to make projections of the numbers of likely respiratory hospital admissions in the 2050s attributable to air pollution, based on emission projections from a number of Representative Concentration Pathways (RCP). NO 2 exhibited the largest association with respiratory hospital admissions out of the pollutants considered, with estimated increased risks of between 0.9 and 1.6% for a one standard deviation increase in concentrations. In the future the projected numbers of respiratory hospital admissions attributable to NO 2 in the 2050s are lower than present day rates under 3 Representative Concentration Pathways (RCPs): 2.6, 6.0, and 8.5, which is due to projected reductions in future NO 2 emissions and concentrations. NO 2 concentrations exhibit consistent substantial present

  7. Seasonal and temporal variations of criteria air pollutants and the influence of meteorological parameters on the concentration of pollutants in ambient air in lahore, pakistan

    International Nuclear Information System (INIS)

    Tabinda, A.B.; Munir, S.; Yasir, A.; Ilyas, A.

    2016-01-01

    Criteria air pollutants have their significance for causing health threats and damage to the environment. The study was conducted to assess the seasonal and temporal variations of criteria air pollutants and evaluating the correlations of criteria air pollutants with meteorological parameters in the city of Lahore, Pakistan for a period of one year from April 2010 to March 2011. The concentrations of criteria air pollutants were determined at fixed monitoring stations equipped with HORIBA analyzers. The annual average concentrations (μ/m/super 3/) of PM /sub 2.5/, O/sub 3/, SO/sub 2/, CO and NO/sub x/ (NO+NO/sub 2/) for this study period were 118.94±57.46, 46.0±24.2, 39.9±8.9, 1940±1300 and 130.9±81.0 (61.8±46.2+57.3±22.19), respectively. PM/sub 2.5/, SO/sub 2/, CO and NO/sub x/ had maximum concentrations during winter whereas O/sub 3/ had maximum concentration during summer. Minimum concentrations of PM/sub 2.5/, SO/sub 2/ and NO/sub x/ were found during monsoon as compared to other seasons due to rainfall which scavenged these pollutants. The O/sub 3/ showed positive correlation with temperature and solar radiation but negative correlation with wind speed. All other criteria air pollutants showed negative correlation with wind speed, temperature and solar radiation. A significant (P<0.01) correlation was found between NO/sub x/ and CO (r = 0.779) which showed that NO/sub x/ and CO arise from common source that could be the vehicular emission. PM/sub 2.5/ was significantly correlated (P<0.01) with NO/sub x/ (r = 0.524) and CO (r = 0.519), respectively. High traffic intensity and traffic jams were responsible for increased air pollutants level especially the PM/sub 2.5/, NO/sub x/ and CO. (author)

  8. Assessment of marine pollution in Izmir Bay: nutrient, heavy metal and total hydrocarbon concentrations.

    Science.gov (United States)

    Kucuksezgin, F; Kontas, A; Altay, O; Uluturhan, E; Darilmaz, E

    2006-01-01

    Izmir Bay (western Turkey) is one of the great natural bays of the Mediterranean. Izmir is an important industrial and commercial centre and a cultural focal point. The main industries in the region include food processing, oil, soap and paint production, chemical industries, paper and pulp factories, textile industries and metal processing. The mean concentrations showed ranges of 0.01-0.19 and 0.01-10 microM for phosphate, 0.10-1.8 and 0.12-27 microM for nitrate+nitrite, and 0.30-5.8 and 0.43-39 microM for silicate in the outer and middle-inner bays, respectively. The TNO(x)/PO(4) ratio is significantly lower than the Redfield's ratio and nitrogen is the limiting element in the middle-inner bays. Diatoms and dinoflagellates were observed all year around in the bay and are normally nitrogen limited. Metal concentrations ranged between Hg: 0.05-1.3, Cd: 0.005-0.82, Pb: 14-113 and Cr: 29-316 microg g(-1) in the sediments. The results showed significant enrichments during sampling periods from Inner Bay. Outer and middle bays show low levels of heavy metal enrichments except estuary of Gediz River. The concentrations of Hg, Cd and Pb in the outer bay were generally similar to the background levels from the Mediterranean. The levels gradually decreased over the sampling period. Total hydrocarbons concentrations range from 427 to 7800 ng g(-1) of sediments. The highest total hydrocarbon levels were found in the inner bay due to the anthropogenic activities, mainly combustion processes of traffic and industrial activities. The concentrations of heavy metals found in fish varied for Hg: 4.5-520, Cd: 0.10-10 and Pb: 0.10-491 microg kg(-1) in Izmir Bay. There was no significant seasonal variation in metal concentrations. An increase in Hg concentration with increasing length was noted for Mullus barbatus. A person can consume more than 2, 133 and 20 meals per week of fish in human diet would represent the tolerable weekly intake of mercury, cadmium and lead, respectively

  9. Variation in glyphosate and AMPA concentrations of surface water and groundwater

    Science.gov (United States)

    Caprile, Ana Clara; Aparicio, Virginia; Sasal, Carolina; Andriulo, Enrique

    2017-04-01

    The presence of pesticides in various environmental matrices indicate that the soil's ability to function as a bio-physical-chemical reactor is declining. As it operates as an interface between air and water, it causes a negative impact on these two vital resources. Currently, the pampa agriculture is simplified with a marked tendency towards spring-summer crops, where the main crops are RR soybean and corn. Herbicides are neither retained nor degraded in the soil, which results in polluted groundwater and surface waters. The objectives of this study were: a) to verify the presence of glyphosate and aminomethylphosphonic acid (AMPA) in Pergamino stream (a typical representative of the most productive agricultural region of Argentina) under different land use and to detect if in the detections there was a space-time pattern, and b) to verify the detection of these molecules in groundwater of the upper same basin under exclusively rural land use. Surface stream was sampling in six sites (five under rural land use and one under urban-industrial land use) at a rate of one sample by spring, summer and winter seasons (2010-2013, 54 total samples). Groundwater glyphosate and AMPA concentrations were determined in 24 piezometers constructed at two positions of the landscape, across the groundwater flow direction, sampled at two sampling dates (2010 and 2012, 45 total samples). In surface water, glyphosate and AMPA were detected in 54 and 69% of the samples analyzed, respectively. The median concentrations were 0.9 and 0.8 µg L-1 for glyphosate and AMPA and maximal concentrations 258 and 5865 µg L-1, respectively. The sampling site under urban-industrial land use had abnormally high concentrations of glyphosate in the spring (attributed to point pollution), a fact that not allowed to see differences in the remaining sampling times under different land uses. AMPA concentrations under urban-industrial land use were high and higher than rural land use in 3 studied seasons

  10. Ecological risk evaluation of polluted soils from Sasa mineral processing concentrator

    OpenAIRE

    Krstev, Boris; Golomeov, Blagoj; Golomeova, Mirjana; Krstev, Aleksandar

    2007-01-01

    The idea that the earth is a closed system and that soil, like other mediums, is polluted by human activities, is very recent, hardly thirty years old. The chief preoccupation has been with water pollution, a conviction that, sooner or later, all the pollutants found in water were the principal cause of the emergence of aquatic ecotoxicology. Yet, the existence of polluted soils has been cited since ancient times. Greek and Roman writers remarked that the contamination of water and air near m...

  11. First observations of surface ozone concentration from the summit region of Mount Everest

    Science.gov (United States)

    Semple, John L.; Moore, G. W. K.

    2008-10-01

    The extreme height of Mount Everest is such that its summit region may periodically be in the lower stratosphere. In this regard it provides a unique location for observing the exchange of ozone between the upper troposphere and lower stratosphere. Here we report the first surface ozone measurements from the summit region of Mount Everest. Simultaneous measurements were recorded at different elevations on the north side from base camp (5676 m) to the summit (8848 m) during May 2005. The concentrations measured were as high as 70 ppb. Meteorological diagnostics suggest that the stratosphere as well as the long range transport of polluted tropospheric air masses from South East Asia are sources of the observed ozone. There is evidence that the source region for ozone in the vicinity of Mount Everest may vary with the onset of the summer monsoon.

  12. Integration of Rs/gis for Surface Water Pollution Risk Modeling. Case Study: Al-Abrash Syrian Coastal Basin

    Science.gov (United States)

    Yaghi, Y.; Salim, H.

    2017-09-01

    Recently the topic of the quality of surface water (rivers - lakes) and the sea is an important topics at different levels. It is known that there are two major groups of pollutants: Point Source Pollution (PSP) and non-point Source pollution (NPSP). Historically most of the surface water pollution protection programs dealing with the first set of pollutants which comes from sewage pipes and factories drainage. With the growing need for current and future water security must stand on the current reality of the coastal rivers basin in terms of freshness and cleanliness and condition of water pollution. This research aims to assign the NPS pollutants that reach Al Abrash River and preparation of databases and producing of risk Pollution map for NPS pollutants in order to put the basin management plan to ensure the reduction of pollutants that reach the river. This research resulted of establishing of Databases of NPSP (Like pesticides and fertilizers) and producing of thematic maps for pollution severity and pollution risk based on the pollution models designed in GIS environment and utilizing from remote sensing data. Preliminary recommendations for managing these pollutants were put.

  13. INTEGRATION OF RS/GIS FOR SURFACE WATER POLLUTION RISK MODELING. CASE STUDY: AL-ABRASH SYRIAN COASTAL BASIN

    Directory of Open Access Journals (Sweden)

    Y. Yaghi

    2017-09-01

    Full Text Available Recently the topic of the quality of surface water (rivers – lakes and the sea is an important topics at different levels. It is known that there are two major groups of pollutants: Point Source Pollution (PSP and non-point Source pollution (NPSP. Historically most of the surface water pollution protection programs dealing with the first set of pollutants which comes from sewage pipes and factories drainage. With the growing need for current and future water security must stand on the current reality of the coastal rivers basin in terms of freshness and cleanliness and condition of water pollution. This research aims to assign the NPS pollutants that reach Al Abrash River and preparation of databases and producing of risk Pollution map for NPS pollutants in order to put the basin management plan to ensure the reduction of pollutants that reach the river. This research resulted of establishing of Databases of NPSP (Like pesticides and fertilizers and producing of thematic maps for pollution severity and pollution risk based on the pollution models designed in GIS environment and utilizing from remote sensing data. Preliminary recommendations for managing these pollutants were put.

  14. Control of Sewer systems and Wastewater treatment plants using pollutant concentration profiles

    DEFF Research Database (Denmark)

    Bechmann, Henrik; Nielsen, Marinus K.; Madsen, Henrik

    1998-01-01

    On-line measurements of pollutants in the wastewater combined with grey-box modelling are used to estimate the amount of deposits in the sewer system. The pollutant mass flow at the wastewater treatment plant is found to consist of a diurnal profile minus the deposited amount of pollutants...

  15. Pollution characteristics and ecological risk assessment of heavy metals in the surface sediments from a source water reservoir

    Directory of Open Access Journals (Sweden)

    Changming Yang

    2016-10-01

    Full Text Available Surface sediment samples were collected from a source water reservoir in Zhejiang Province, East of China to investigate pollution characteristics and potential ecological risk of heavy metals. The BCR sequential extraction method was used to determine the four chemical fractions of heavy metals such as acid soluble, easily reducible, easily oxidizable and residual fractions. The heavy metals pollution and potential ecological risk were evaluated systematically using geoaccumulation index (Igeo and Hakanson potential ecological risk index (H′. The results showed that the sampling sites from the estuaries of tributary flowing through downtowns and heavy industrial parks showed significantly (p < 0.05 higher average concentrations of heavy metals in the surface sediments, as compared to the other sampling sites. Chemical fractionation showed that Mn existed mainly in acid extractable fraction, Cu and Pb were mainly in reducible fraction, and As existed mainly in residual fraction in the surface sediments despite sampling sites. The sampling sites from the estuary of tributary flowing through downtown showed significantly (p < 0.05 higher proportions of acid extractable and reducible fractions than the other sampling sites, which would pose a potential toxic risk to aquatic organisms as well as a potential threat to drinking water safety. As, Pb, Ni and Cu were at relatively high potential ecological risk with high Igeo values for some sampling locations. Hakanson potential ecological risk index (H′ showed the surface sediments from the tributary estuaries with high population density and rapid industrial development showed significantly (p < 0.05 higher heavy metal pollution levels and potential ecological risk in the surface sediments, as compared to the other sampling sites.

  16. Laser Remote Sensing of Pollution on Water Surfaces

    Science.gov (United States)

    Bunkin, A. F.; Surovegin, Aleksander L.

    1992-01-01

    One of the most important problems of modern environmental science is the detection and identification of various impurities in the ocean. Sources of impurities in sea water are diverse. The most common of them are accidental transport, agricultural, and oil industry spills. Once the ecological balance is disturbed, biological processes in sea water become affected, resulting in changes in chlorophyll concentrations, water turbidity, and temperature. During the last few years, we have created new types of lidars and arranged nearly ten aircraft and shipboard expeditions. Some aircraft expeditions dealt with terrestrial investigations. Others were devoted to oceanological research, the results of which are discussed here. Emphasis is on the detection of phytoplankton chlorophyll and hydrocarbon in sea water.

  17. Heavy metal pollution and Pb isotopic tracing in the intertidal surface sediments of Quanzhou Bay, southeast coast of China.

    Science.gov (United States)

    Yu, Ruilian; Zhang, Weifang; Hu, Gongren; Lin, Chengqi; Yang, Qiuli

    2016-04-15

    Concentrations of 16 heavy metals and Pb isotopic ratios in the intertidal surface sediments of Quanzhou Bay were determined to study the pollution level of heavy metals and the sources of Pb. The results showed that most concentrations of Cd, Sn, Mn, Cu, Zn, Cr, Pb, Hg, Ni, Co, Cs, Fe and V were higher than the background values, while most concentrations of Ti, Sb and Sr were lower than the background values. The mean concentrations of Cu, Zn, Pb, Cr and Cd exceeded the first-grade criteria of Chinese marine sediment quality. The geo-accumulation indexes revealed that the sediments had been polluted by some heavy metals. The results of Pb isotopic tracing indicated that the total Pb in the sediments were mainly from parent material, industrial emission and vehicle exhaust with the mean contributions of 38.2%, 51.3% and 10.5%, respectively, calculated by a three-end-member model of Pb isotopic ratios. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. The intake of water containing a mix of pollutants at environmentally relevant concentrations leads to defensive response deficit in male C57Bl/6J mice.

    Science.gov (United States)

    de Souza, Joyce Moreira; Rabelo, Letícia Martins; de Faria, Denise Braga Gomes; Guimarães, Abraão Tiago Batista; da Silva, Wellington Alves Mizael; Rocha, Thiago Lopes; Estrela, Fernanda Neves; Chagas, Thales Quintão; de Oliveira Mendes, Bruna; Malafaia, Guilherme

    2018-02-09

    Previous studies have individually confirmed the toxic effects from different pollutants on mammals. However, effects resulting from the exposure of these animals to multi-pollutant mixes have not been studied so far. Thus, the aim of the current study is to assess the effect from the chronic exposure (105days) of C57Bl/6J mice to a mix of pollutants on their response to potential predators. In order to do so, the following groups were formed: "control", "Mix 1× [compounds from 15 pollutants identified in surface waters at environmentally relevant concentration (ERC)]", "Mix 10×" and "Mix 25×" (concentrations 10 and 25 times higher than the ERC). From the 100th experimental day on, the animals were subjected to tests in order to investigate whether they showed locomotor, visual, olfactory and auditory changes, since these abilities are essential to their anti-predatory behavior. Next, the animals' behavior towards potential predators (Felis catus and Pantherophis guttatus) was assessed. The herein collected data did not show defensive response from any of the experimental groups to the predatory stimulus provided by P. guttatus. However, the control animals, only, presented anti-predatory behavior when F. catus was introduced in the apparatus, fact that suggests defensive response deficit resulting from the treatments. Thus, the current study is pioneer in showing that the chronic intake of water containing a mix of pollutants (even at low concentrations) leads to behavioral disorders able to affect the survival and population dynamics of mammalian species at ecological level. Copyright © 2018 Elsevier B.V. All rights reserved.

  19. Low concentration volatile organic pollutants removal in combined adsorber-desorber-catalytic reactor system

    Directory of Open Access Journals (Sweden)

    Arsenijević Zorana

    2008-01-01

    Full Text Available The removal of volatile organic compounds (VOCs from numerous emission sources is of crucial importance due to more rigorous demands on air quality. Different technologies can be used to treat the VOCs from effluent gases: absorption, physical adsorption, open flame combustion, thermal and catalytic incineration. Their appropriateness for the specific process depends on several factors such as efficiency, energy consumption, secondary pollution, capital investments etc. The distinctive features of the catalytic combustion are high efficiency and selectivity toward be­nign products, low energy consumption and absence of secondary polluti­on. The supported noble catalysts are widely used for catalytic incineration due to their low ignition temperatures and high thermal and chemical stability. In our combined system adsorption and desorption are applied in the spouted bed with draft tube (SBDT unit. The annular zone, loaded with sorbent, was divided in adsorption and desorption section. Draft tube enabled sorbent recirculation between sections. Combustion of desorbed gases to CO2 and water vapor are realized in additive catalytic reactor. This integrated device provided low concentrations VOCs removal with reduced energy consumption. Experiments were conducted on a pilot unit of 220 m3/h nominal capacity. The sorbent was activated carbon, type K81/B - Trayal Corporation, Krusevac. A sphere shaped commercial Pt/Al2O3 catalyst with "egg-shell" macro-distribution was used for the investigation of xylene deep oxidation. Within this paper the investigations of removal of xylene vapors, a typical pollutant in production of liquid pesticides, in combined adsorber/desorber/catalytic reactor system is presented.

  20. Temporal Variation in Air Pollution Concentrations and Preterm Birth—A Population Based Epidemiological Study

    Directory of Open Access Journals (Sweden)

    Bertil Forsberg

    2012-01-01

    Full Text Available There is growing evidence of adverse birth outcomes due to exposure to air pollution during gestation. However, recent negative studies are also reported. The aim of this study was to assess the effect of ozone and vehicle exhaust exposure (NO2 on the length of the gestational period and risk of preterm delivery. We used data from the Swedish Medical Birth Registry on all vaginally delivered singleton births in the Greater Stockholm area who were conceived during 1987–1995 (n = 115,588. Daily average levels of NO2 (from three measuring stations and ozone (two stations were used to estimate trimester and last week of gestation average exposures. Linear regression models were used to assess the association between the two air pollutants and three exposure windows, while logistic regression models were used when analyzing associations with preterm delivery ( < 37 weeks gestation. Five percent were born preterm. The median gestational period was 40 weeks. Higher levels of ozone during the first trimester were associated with shorter gestation as well as with an elevated risk of preterm delivery, the odds ratio from the most complex model was 1.06 (95% CI: 1.00–1.13 per 10 μg/m3 increase in the mean daily 8-h maximum concentration. Higher levels of ozone during the second trimester were associated with shorter gestation but the elevated risk of preterm delivery was not statistically significant. Higher levels of ozone and NO2 during the last week of gestation were associated with a shorter duration of gestation and NO2 also with preterm delivery. There were no significant associations between first and second trimester NO2 exposure estimates and studied outcomes. The effect of first trimester ozone exposure, known to cause oxidative stress, was smallest among women who conceived during autumn when vitamin D status, important for fetal health, in Scandinavian women is the highest.

  1. The Influence of Surface Alumina and Silica on the Photocatalytic Degradation of Organic Pollutants

    Directory of Open Access Journals (Sweden)

    Terry A. Egerton

    2013-03-01

    Full Text Available Practical photocatalysis for degradation of organic pollutants must take into account the influence of other chemicals. Significant Al deposition on titania can occur at naturally occurring concentrations of dissolved Al. This paper reviews the author’s work on the influence of deliberately deposited hydrous oxides of aluminium on the behavior of a ~130 m2 g−1 rutile TiO2, and then compares the behavior of deposited alumina with that of deposited silica. On rutile some adsorbed nitrogen is infrared-active. Alumina and silica deposited on the rutile reduce, and ultimately eliminate, this infrared-active species. They also reduce photocatalytic oxidation of both propan-2-ol and dichloroacetate ion and the photocatalytic reduction of diphenyl picryl hydrazine. The surface oxides suppress charge transfer and may also reduce reactant adsorption. Quantitative measurement of TiO2 photogreying shows that the adsorbed inorganics also reduce photogreying, attributed to the capture of photogenerated conduction band electrons by Ti4+ to form Ti3+. The influence of adsorbed phosphate on photocatalysis is briefly considered, since phosphate reduces photocatalytic disinfection. In the context of classical colloid studies, it is concluded that inorganic species in water can significantly reduce photoactivity from the levels that measured in pure water.

  2. The Intervention of Adult Education in Surface Water Pollution in the ...

    African Journals Online (AJOL)

    The vulnerability of surface water in the Niger-Delta Region of Nigeria to frequent oil spills and has other pollutants have had negative effects on the fragile mangrove ecosystem, wildlife, aquatic resources and most importantly on man. It is in this regard that the intervention of adult education came into being to see that the ...

  3. A method for screening for the risk of chronic effects of surface water pollution.

    Science.gov (United States)

    Soldán, Přemysl; Badurová, Jana

    2013-01-01

    The article describes a method for screening for the risk of chronic surface water pollution which was developed at the T. G. Masaryk Water Research Institute. The approach, which is based on exotoxicological analyses, can be classed as a rapid method of assessment. The degree of risk of chronic effects surface water pollution is determined from an evaluation of two major parameters-toxicity and genotoxicity. As the method utilizes relative simple procedures for sample collection, pretreatment of the sample, chemical analyses, bioassays and results assessment, this approach is suitable for widespread practical use. Extensive utilization of this approach for assessing river basins in the Czech Republic has proved its suitability for a more sophisticated detection of the biological impact of surface water pollution. This is documented in the article where the method is used in a study of the Bílina River, and in the overview of the results of the risk assessment of chronic effects of surface water pollution in selected sections of three international river basins in the Czech Republic.

  4. Method for the prioritization of areas experiencing microbial pollution of surface water

    CSIR Research Space (South Africa)

    Venter, SN

    1998-01-01

    Full Text Available The increased threat of faecal pollution in recent years and the high priority of protecting human health by the government led to the initiation of a national microbial monitoring programme for surface water in South Africa. According to the design...

  5. Evaluation of Surface Water Quality by Using GIS and a Heavy Metal Pollution Index (HPI) Model in a Coal Mining Area, India.

    Science.gov (United States)

    Tiwari, Ashwani Kumar; De Maio, Marina; Singh, Prasoon Kumar; Mahato, Mukesh Kumar

    2015-09-01

    Twenty eight surface water samples were collected from fourteen sites of the West Bokaro coalfield, India. The concentration of Mn, Cu, Zn, Ni, As, Se, Al, Cr, Ba, and Fe were analyzed using inductively coupled plasma mass spectrometry (ICP-MS) for determination of seasonal fluctuations and a heavy metal pollution index (HPI). The HPI values were below the critical pollution index value of 100. Metal concentrations were higher in the pre-monsoon season as compared to the post-monsoon season. The Zn, Ni, Mn, As, Se, Al, Ba, Cu, and Cr concentrations did not exceed the desirable limits for drinking water in either season. However, at many sites, concentrations of Fe were above the desirable limit of the WHO (2006) and Indian drinking water standard (BIS 2003) in both seasons. The water that contained higher concentrations of Fe would require treatment before domestic use.

  6. Air change rates of motor vehicles and in-vehicle pollutant concentrations from secondhand smoke.

    Science.gov (United States)

    Ott, Wayne; Klepeis, Neil; Switzer, Paul

    2008-05-01

    The air change rates of motor vehicles are relevant to the sheltering effect from air pollutants entering from outside a vehicle and also to the interior concentrations from any sources inside its passenger compartment. We made more than 100 air change rate measurements on four motor vehicles under moving and stationary conditions; we also measured the carbon monoxide (CO) and fine particle (PM(2.5)) decay rates from 14 cigarettes smoked inside the vehicle. With the vehicle stationary and the fan off, the ventilation rate in air changes per hour (ACH) was less than 1 h(-1) with the windows closed and increased to 6.5 h(-1) with one window fully opened. The vehicle speed, window position, ventilation system, and air conditioner setting was found to affect the ACH. For closed windows and passive ventilation (fan off and no recirculation), the ACH was linearly related to the vehicle speed over the range from 15 to 72 mph (25 to 116 km h(-1)). With a vehicle moving, windows closed, and the ventilation system off (or the air conditioner set to AC Max), the ACH was less than 6.6 h(-1) for speeds ranging from 20 to 72 mph (32 to 116 km h(-1)). Opening a single window by 3'' (7.6 cm) increased the ACH by 8-16 times. For the 14 cigarettes smoked in vehicles, the deposition rate k and the air change rate a were correlated, following the equation k=1.3a (R(2)=82%; n=14). With recirculation on (or AC Max) and closed windows, the interior PM(2.5) concentration exceeded 2000 microg m(-3) momentarily for all cigarettes tested, regardless of speed. The concentration time series measured inside the vehicle followed the mathematical solutions of the indoor mass balance model, and the 24-h average personal exposure to PM(2.5) could exceed 35 microg m(-3) for just two cigarettes smoked inside the vehicle.

  7. Temporal variation of coastal surface sediment bacterial communities along an environmental pollution gradient.

    Science.gov (United States)

    Thiyagarajan, V; Tsoi, M M Y; Zhang, W; Qian, P Y

    2010-07-01

    Terminal restriction fragment length polymorphism analysis (T-RFLP) was used to track the changes of bacterial community compositions (BCC) in coastal surface sediments along an environmental pollution gradient between 2004 and 2006. BCC in the chronically contaminated sites showed the largest deviation from those in the adjacent sites. Surprisingly, BCC at two contrasting environments (oceanic vs. river-influenced) were more similar. Unexpectedly, the BCC did not recover (when compared to oceanic control site) even after 5 years of pollution abatement initiatives in Victoria Harbour, Hong Kong. On the other hand, disposal of treated sewage for 5 years in one of the sites did not significantly affect the BCC. A striking seasonal variation in the BCC was observed at only the polluted sites. Although factors other than pollution gradients may explain the observed BCC patterns, the information presented here can be useful in predicting long-term effects of pollution on BCC. Furthermore, this study suggests that BCC analysis using T-RFLP is a faster, reliable and easier approach to monitor microbenthic community response to environmental pollution gradient in coastal sediments. 2010 Elsevier Ltd. All rights reserved.

  8. Marine plastic pollution in waters around Australia: characteristics, concentrations, and pathways.

    Science.gov (United States)

    Reisser, Julia; Shaw, Jeremy; Wilcox, Chris; Hardesty, Britta Denise; Proietti, Maira; Thums, Michele; Pattiaratchi, Charitha

    2013-01-01

    Plastics represent the vast majority of human-made debris present in the oceans. However, their characteristics, accumulation zones, and transport pathways remain poorly assessed. We characterised and estimated the concentration of marine plastics in waters around Australia using surface net tows, and inferred their potential pathways using particle-tracking models and real drifter trajectories. The 839 marine plastics recorded were predominantly small fragments ("microplastics", median length = 2.8 mm, mean length = 4.9 mm) resulting from the breakdown of larger objects made of polyethylene and polypropylene (e.g. packaging and fishing items). Mean sea surface plastic concentration was 4256.4 pieces km(-2), and after incorporating the effect of vertical wind mixing, this value increased to 8966.3 pieces km(-2). These plastics appear to be associated with a wide range of ocean currents that connect the sampled sites to their international and domestic sources, including populated areas of Australia's east coast. This study shows that plastic contamination levels in surface waters of Australia are similar to those in the Caribbean Sea and Gulf of Maine, but considerably lower than those found in the subtropical gyres and Mediterranean Sea. Microplastics such as the ones described here have the potential to affect organisms ranging from megafauna to small fish and zooplankton.

  9. Marine plastic pollution in waters around Australia: characteristics, concentrations, and pathways.

    Directory of Open Access Journals (Sweden)

    Julia Reisser

    Full Text Available Plastics represent the vast majority of human-made debris present in the oceans. However, their characteristics, accumulation zones, and transport pathways remain poorly assessed. We characterised and estimated the concentration of marine plastics in waters around Australia using surface net tows, and inferred their potential pathways using particle-tracking models and real drifter trajectories. The 839 marine plastics recorded were predominantly small fragments ("microplastics", median length = 2.8 mm, mean length = 4.9 mm resulting from the breakdown of larger objects made of polyethylene and polypropylene (e.g. packaging and fishing items. Mean sea surface plastic concentration was 4256.4 pieces km(-2, and after incorporating the effect of vertical wind mixing, this value increased to 8966.3 pieces km(-2. These plastics appear to be associated with a wide range of ocean currents that connect the sampled sites to their international and domestic sources, including populated areas of Australia's east coast. This study shows that plastic contamination levels in surface waters of Australia are similar to those in the Caribbean Sea and Gulf of Maine, but considerably lower than those found in the subtropical gyres and Mediterranean Sea. Microplastics such as the ones described here have the potential to affect organisms ranging from megafauna to small fish and zooplankton.

  10. Marine Plastic Pollution in Waters around Australia: Characteristics, Concentrations, and Pathways

    Science.gov (United States)

    Reisser, Julia; Shaw, Jeremy; Wilcox, Chris; Hardesty, Britta Denise; Proietti, Maira; Thums, Michele; Pattiaratchi, Charitha

    2013-01-01

    Plastics represent the vast majority of human-made debris present in the oceans. However, their characteristics, accumulation zones, and transport pathways remain poorly assessed. We characterised and estimated the concentration of marine plastics in waters around Australia using surface net tows, and inferred their potential pathways using particle-tracking models and real drifter trajectories. The 839 marine plastics recorded were predominantly small fragments (“microplastics”, median length = 2.8 mm, mean length = 4.9 mm) resulting from the breakdown of larger objects made of polyethylene and polypropylene (e.g. packaging and fishing items). Mean sea surface plastic concentration was 4256.4 pieces km−2, and after incorporating the effect of vertical wind mixing, this value increased to 8966.3 pieces km−2. These plastics appear to be associated with a wide range of ocean currents that connect the sampled sites to their international and domestic sources, including populated areas of Australia's east coast. This study shows that plastic contamination levels in surface waters of Australia are similar to those in the Caribbean Sea and Gulf of Maine, but considerably lower than those found in the subtropical gyres and Mediterranean Sea. Microplastics such as the ones described here have the potential to affect organisms ranging from megafauna to small fish and zooplankton. PMID:24312224

  11. The influence of meteorological factors and biomass burning on surface ozone concentrations at Tanah Rata, Malaysia

    Science.gov (United States)

    Toh, Ying Ying; Lim, Sze Fook; von Glasow, Roland

    2013-05-01

    The surface ozone concentrations at the Tanah Rata regional Global Atmosphere Watch (GAW) station, Malaysia (4°28‧N, 101°23‧E, 1545 m above Mean Sea Level (MSL)) from June 2006 to August 2008 were analyzed in this study. Overall the ozone mixing ratios are very low; the seasonal variations show the highest mixing ratios during the Southwest monsoon (average 19.1 ppb) and lowest mixing ratios during the spring intermonsoon (average 14.2 ppb). The diurnal variation of ozone is characterised by an afternoon maximum and night time minimum. The meteorological conditions that favour the formation of high ozone levels at this site are low relative humidity, high temperature and minimum rainfall. The average ozone concentration is lower during precipitation days compared to non-precipitation days. The hourly averaged ozone concentrations show significant correlations with temperature and relative humidity during the Northeast monsoon and spring intermonsoon. The highest concentrations are observed when the wind is blowing from the west. We found an anticorrelation between the atmospheric pressure tide and ozone concentrations. The ozone mixing ratios do not exceed the recommended Malaysia Air Quality Guidelines for 1-h and 8-h averages. Five day backward trajectories on two high ozone episodes in 07 August 2006 (40.0 ppb) and 24 February 2008 (45.7 ppb) are computed using the HYbrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model to investigate the origin of the pollutants and influence of regional transport. The high ozone episode during 07 August 2006 (burning season during southwest monsoon) is mainly attributed to regional transport from biomass burning in Sumatra, whereas favourable meteorological conditions (i.e. low relative humidity, high temperature and solar radiation, zero rainfall) and long range transport from Indo-China have elevated the ozone concentrations during 24 February 2008.

  12. Complex organic pollutant mixtures originating from industrial and municipal emissions in surface waters of the megacity Jakarta-an example of a water pollution problem in emerging economies.

    Science.gov (United States)

    Dsikowitzky, Larissa; Hagemann, Lukas; Dwiyitno; Ariyani, Farida; Irianto, Hari Eko; Schwarzbauer, Jan

    2017-12-01

    During the last decades, the global industrial production partly shifted from industrialized nations to emerging and developing countries. In these upcoming economies, the newly developed industrial centers are generally located in densely populated areas, resulting in the discharge of often only partially treated industrial and municipal wastewaters into the surface waters. There is a huge gap of knowledge about the composition of the complex organic pollutant mixtures occurring in such heavily impacted areas. Therefore, we applied a non-target screening to comprehensively assess river pollution in a large industrial area located in the megacity Jakarta. More than 100 structurally diverse organic contaminants were identified, some of which were reported here for the first time as environmental contaminants. The concentrations of paper manufacturing chemicals in river water-for example, of the endocrine-disrupting compound bisphenol A (50-8000 ng L -1 )-were as high as in pure untreated paper industry wastewaters. The non-target screening approach is the adequate tool for the identification of water contaminants in the new global centers of industrial manufacturing-as the first crucial step towards the evaluation of as yet unrecognized environmental risks.

  13. Calculation of the surface water pollution index in the evaluation of environmental component of product life cycle

    Directory of Open Access Journals (Sweden)

    Олег Аскольдович Проскурнин

    2015-05-01

    Full Text Available The assessment feasibility of the combined effect of the product life cycle on the environment is grounded. As an example, the pollution of surface waters at the production stage is considered in the article. A mechanism of ranking indicators of surface water pollution according to their importance is proposed. An algorithm for checking the consistency of the statistical expert judgment in determining weight coefficient for the indicators of pollution, based on the use of the concordance coefficient, is given

  14. The influence of atmospheric circulation on the air pollution concentration and temperature inversion in Sosnowiec. Case study

    Directory of Open Access Journals (Sweden)

    Widawski Artur

    2015-06-01

    Full Text Available Sosnowiec is located in the Katowice Region, which is the most urbanized and industrialized region in Poland. Urban areas of such character favor enhancement of pollution concentration in the atmosphere and the consequent emergence of smog. Local meteorological and circulation conditions significantly influence not only on the air pollution level but also change air temperature considerably in their centers and immediate vicinities. The synoptic situation also plays the major role in dispersal and concentration of air pollutants and changes in temperature profile. One of the most important are the near-ground (100 m inversions of temperature revealed their highest values on clear winter days and sometimes stay still for the whole day and night. Air temperature inversions in Sosnowiec occur mainly during anticyclone stagnation (Ca-anticyclone centre and Ka-anticyclonic ridge and in anticyclones with air advection from the south and southwest (Sa and SWa which cause significantly increase of air pollution values. The detailed evaluation of the influence of circulation types on the appearance of a particular concentration of pollutants carried out in this work has confirmed the predominant influence of individual circulation types on the development of air pollution levels at the Katowice region. This paper presents research case study results of the thermal structure of the near-ground atmospheric layer (100 m and air pollution parameters (PM10, SO2, NO, NO2 changes in selected days of 2005 year according to regional synoptic circulation types. The changes in urban environment must be taken into account in analyses of multiyear trends of air temperature and air conditions on the regional and global scales.

  15. Examining the concentrations of volatile organic compounds and pollutant gases in printing and copying centers in Khorramabad, Iran in 2015

    Directory of Open Access Journals (Sweden)

    Rajab Rashidi

    2016-12-01

    Full Text Available Background : Given the large amount of gaseous and aerosol pollutants produced by the printing press industry, the indoor and outdoor air quality of such centers in Khorramabad, Iran was assessed. Methods and Materials: In a descriptive study, five gaseous pollutants from among criteria air pollutants (CO, NO, NO2, SO2, O3 and volatile organic compounds (VOCs were measured. Overall, 360 samples were taken from the indoor and outdoor air of printing press centers during the two seasons of summer and winter. In addition to the direct reading sampling method, environmental sampling was also conducted. In the direct reading method, the environmental analyzer device was used to measure criteria gaseous pollutants and the phocheck5000 device was used to measure the VOCs. In the sampling by environmental pumps, SKC activated carbon absorbent tubes were used randomly/continuously during the work hours and periodically for all centers. The samples were prepared using a carbon disulfide solution and were analyzed using a gas chromatograph device. Statistical t-tests were used to analyze the results. Results: The results of the study demonstrated that, the concentrations of the all of the criteria pollutants except for the CO gas and, among the VOCs, the concentrations of benzene and toluene in the air of the printing press centers was higher than the standards set by the EPA for indoor areas. Further, there was a significant difference between the concentrations of benzene and toluene during the summer and winder seasons (p<0.05. In all the measurements carried out in summer and winter, the amount of O3 was significantly higher inside the printing press centers than that of outdoor areas (p<0.05. Conclusion: Although printing press centers cannot be considered as serious hotspots for the emission of pollutants into public places in urban areas, the pollutants produced in these centers, especially O3 can jeopardize the health of the employees of these

  16. assessment of heavy metals concentrations in the surface water

    African Journals Online (AJOL)

    User

    socio-economic potentialities the basin has on the populace utilizing it and the nation in general. ... Water contamination place other resources such as fisheries ..... System. Techno Science Journal. 2 (1): 83-. 88. Osae-Addo, A. (1992): Nigeria: Industrial Pollution. Control. Sector Report Draft. (cited in World. Bank, 1995:5).

  17. Method of and device for detecting oil pollutions on water surfaces

    Science.gov (United States)

    Belov, Michael Leonidovich [Moscow, RU; Gorodnichev, Victor Aleksandrovich [Moscow, RU; Kozintsev, Valentin Ivanovich [Moscow, RU; Smimova, Olga Alekseevna [Moscow, RU; Fedotov, Yurii Victorovich [Moscow, RU; Khroustaleva, Anastasiva Michailovnan [Moscow, RU

    2008-08-26

    Detection of oil pollution on water surfaces includes providing echo signals obtained from optical radiation of a clean water area at two wavelengths, optically radiating an investigated water area at two wavelengths and obtaining echo signals from the optical radiation of the investigated water area at the two wavelengths, comparing the echo signals obtained from the radiation of the investigated area at two wavelengths with the echo signals obtained from the radiation of the clean water area, and based on the comparison, determining presence or absence of oil pollution in the investigated water area.

  18. A study on the environmental behavior of global air pollutants based on the continuous measurements of atmospheric radon concentrations

    International Nuclear Information System (INIS)

    Iida, Takao; Yamazawa, Hiromi

    2003-01-01

    Radon is a useful natural radioactive tracer of air transportation of atmospheric pollution, since radon is a noble gas and chemically inert. The atmospheric radon concentration is usually measured by a high-sensitivity electrostatic collection method or a two-filter method. The variations of radon concentrations observed over a solitary island and in the upper atmosphere are suitable for comparing with those of air pollutants. Some numerical simulation models were used to study the radon global transport in the atmosphere. In East Asia, atmospheric radon and air pollutants are transported with the air stream from the continent of China to the Northwestern Pacific Ocean. It is necessary to clarify the transport mechanism from both radon observations at various locations and numerical simulation. (author)

  19. High variation subarctic topsoil pollutant concentration prediction using neural network residual kriging

    Science.gov (United States)

    Sergeev, A. P.; Tarasov, D. A.; Buevich, A. G.; Subbotina, I. E.; Shichkin, A. V.; Sergeeva, M. V.; Lvova, O. A.

    2017-06-01

    The work deals with the application of neural networks residual kriging (NNRK) to the spatial prediction of the abnormally distributed soil pollutant (Cr). It is known that combination of geostatistical interpolation approaches (kriging) and neural networks leads to significantly better prediction accuracy and productivity. Generalized regression neural networks and multilayer perceptrons are classes of neural networks widely used for the continuous function mapping. Each network has its own pros and cons; however both demonstrated fast training and good mapping possibilities. In the work, we examined and compared two combined techniques: generalized regression neural network residual kriging (GRNNRK) and multilayer perceptron residual kriging (MLPRK). The case study is based on the real data sets on surface contamination by chromium at a particular location of the subarctic Novy Urengoy, Russia, obtained during the previously conducted screening. The proposed models have been built, implemented and validated using ArcGIS and MATLAB environments. The networks structures have been chosen during a computer simulation based on the minimization of the RMSE. MLRPK showed the best predictive accuracy comparing to the geostatistical approach (kriging) and even to GRNNRK.

  20. The association between daily concentrations of air pollution and visits to a psychiatric emergency unit: a case-crossover study.

    Science.gov (United States)

    Oudin, Anna; Åström, Daniel Oudin; Asplund, Peter; Steingrimsson, Steinn; Szabo, Zoltan; Carlsen, Hanne Krage

    2018-01-10

    Air pollution is one of the leading causes of mortality and morbidity worldwide. Experimental studies, and a few epidemiological studies, suggest that air pollution may cause acute exacerbation of psychiatric disorders, and even increase the rate of suicide attempts, but epidemiological studies on air pollution in association with psychiatric disorders are still few. Our aim was to investigate associations between daily fluctuations in air pollution concentrations and the daily number of visits to a psychiatric emergency unit. Data from Sahlgrenska University Hospital, Gothenburg, Sweden, on the daily number of visits to the Psychiatric emergency unit were combined with daily data on monitored concentrations of respirable particulate matter(PM 10 ), ozone(O 3 ), nitrogen dioxides(NO 2 ) and temperature between 1st July 2012 and 31st December 2016. We used a case-crossover design to analyze data with conditional Poisson regression models allowing for over-dispersion. We stratified data on season. Visits increased with increasing PM 10 levels during the warmer season (April to September) in both single-pollutant and two-pollutant models. For example, an increase of 3.6% (95% Confidence Interval, CI, 0.4-7.0%) was observed with a 10 μg/m3 increase in PM 10 adjusted for NO 2 . In the three-pollutant models (adjusting for NO 2 and O 3 simultaneously) the increase was 3.3% (95% CI, -0.2-6.9). There were no clear associations between the outcome and NO 2 , O 3 , or PM 10 during the colder season (October to March). Ambient air particle concentrations were associated with the number of visits to the Psychiatric emergency unit in the warm season. The results were only borderline statistically significant in the fully adjusted (three-pollutant) models in this small study. The observation could be interpreted as indicative of air pollution as either exacerbating an underlying psychiatric disorder, or increasing mental distress, even in areas with comparatively low levels of

  1. Effect of poverty on the relationship between personal exposures and ambient concentrations of air pollutants in Ho Chi Minh City

    Science.gov (United States)

    Mehta, Sumi; Sbihi, Hind; Dinh, Tuan Nguyen; Xuan, Dan Vu; Le Thi Thanh, Loan; Thanh, Canh Truong; Le Truong, Giang; Cohen, Aaron; Brauer, Michael

    2014-10-01

    Socioeconomic factors often affect the distribution of exposure to air pollution. The relationships between health, air pollution, and poverty potentially have important public health and policy implications, especially in areas of Asia where air pollution levels are high and income disparity is large. The objective of the study was to characterize the levels, determinants of exposure, and relationships between children personal exposures and ambient concentrations of multiple air pollutants amongst different socioeconomic segments of the population of Ho Chi Minh City, Vietnam. Using repeated (N = 9) measures personal exposure monitoring and determinants of exposure modeling, we compared daily average PM2.5, PM10, PM2.5 absorbance and NO2 concentrations measured at ambient monitoring sites to measures of personal exposures for (N = 64) caregivers of young children from high and low socioeconomic groups in two districts (urban and peri-urban), across two seasons. Personal exposures for both PM sizes were significantly higher among the poor compared to non-poor participants in each district. Absolute levels of personal exposures were under-represented by ambient monitors with median individual longitudinal correlations between personal exposures and ambient concentrations of 0.4 for NO2, 0.6 for PM2.5 and PM10 and 0.7 for absorbance. Exposures of the non-poor were more highly correlated with ambient concentrations for both PM size fractions and absorbance while those for NO2 were not significantly affected by socioeconomic position. Determinants of exposure modeling indicated the importance of ventilation quality, time spent in the kitchen, air conditioner use and season as important determinant of exposure that are not fully captured by the differences in socioeconomic position. Our results underscore the need to evaluate how socioeconomic position affects exposure to air pollution. Here, differential exposure to major sources of pollution, further influenced by

  2. Persistent organic pollutants in the Tibetan surface soil: Spatial distribution, air–soil exchange and implications for global cycling

    International Nuclear Information System (INIS)

    Wang Xiaoping; Sheng Jiujiang; Gong Ping; Xue Yonggang; Yao Tandong; Jones, Kevin C.

    2012-01-01

    There are limited data on persistent organic pollutants (POPs) in the soils of the Tibetan Plateau. This paper presents data from a survey of organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs) in 40 background surface (0–5 cm) soils of the Tibetan Plateau. Soil concentrations (pg/g, dw) ranged as follows: DDTs, 13-7700; HCHs, 64-847; HCB, 24-564; sum of 15 PCBs, 75-1021; and sum of 9 PBDEs, below detection limit −27. Soil DDT, HCB, PCB and PBDE concentrations were strongly influenced by soil organic carbon content. HCH concentrations were clearly associated with the proximity to source regions in south Asia. The air–soil equilibrium status of POPs suggested the Tibetan soils may be partial “secondary sources” of HCB, low molecular weight PCBs and HCHs and will likely continue to be “sinks” for the less volatile DDE and DDT. - Highlights: ► Soil organic carbon content influence the spatial distribution of persistent organic pollutants. ► The Tibetan soil acts as “secondary sources” for HCB, low molecular weight PCBs and HCHs. ► The Tibetan soil will continue to be “sinks” for DDE and DDT. - Tibetan soils may be potential “secondary sources” of the HCB, low molecular weight PCBs and HCHs that are observed in air.

  3. Development of Land Use Regression models for particulate matter and associated components in a low air pollutant concentration airshed

    NARCIS (Netherlands)

    Dirgawati, Mila; Heyworth, Jane S.; Wheeler, Amanda J.; McCaul, Kieran A.; Blake, David; Boeyen, Jonathon; Cope, Martin; Yeap, Bu Beng; Nieuwenhuijsen, Mark; Brunekreef, Bert; Hinwood, Andrea

    2016-01-01

    Perth, Western Australia represents an area where pollutant concentrations are considered low compared with international locations. Land Use Regression (LUR) models for PM10, PM2.5 and PM2.5 Absorbance (PM2.5Abs) along with their elemental components: Fe, K, Mn, V, S, Zn and Si were developed for

  4. Implications of alternative assumptions regarding future air pollution control in scenarios similar to the Representative Concentration Pathways

    NARCIS (Netherlands)

    Chuwah, C.; van Noije, T.; van Vuuren, D.P.; Hazeleger, W.; Strunk, A.; Deetman, S.; Beltran, A.M.; van Vliet, J.

    2013-01-01

    The uncertain, future development of emissions of short-lived trace gases and aerosols forms a key factor for future air quality and climate forcing. The Representative Concentration Pathways (RCPs) only explore part of this range as they all assume that worldwide ambitious air pollution control

  5. Distribution and pollution assessment of heavy metals in surface sediments in Xiaoqing river estuary and its adjacent sea of Laizhou bay

    Science.gov (United States)

    Wang, Li; Luo, Xianxiang; Fan, Yuqing

    2018-03-01

    In this paper, the monitoring results of four heavy metals Cu, Pb, Zn and Hg at 10 sampling stations in Xiaoqing river estuary and its adjacent sea of Laizhou Bay in November 2008 were analyzed and evaluated. The results showed that the concentrations of heavy metals in the steam channel and estuary are higher than those in the adjacent sea, and the metal concentrations were below the standard for I class of marine sediment quality, excepting the station 2 in the steam channel and station 5 in the estuary. The assessment of the single-factor pollution index showed that the overall pollution level of the study area was relatively low, but there was serious pollution phenomenon in individual station. The potential ecological risk of heavy metals in the surface sediments was generally at a low level, and Hg had the highest potential risk.

  6. Heavy metal concentrations in a soil-plant-snail food chain along a terrestrial soil pollution gradient

    Energy Technology Data Exchange (ETDEWEB)

    Notten, M.J.M. [Institute of Ecological Science, Department of Systems Ecology, Vrije Universiteit Amsterdam, De Boelelaan 1085, 1081 HV, Amsterdam (Netherlands)]. E-mail: martje.notten@ecology.falw.vu.nl; Oosthoek, A.J.P. [Institute of Ecological Science, Department of Systems Ecology, Vrije Universiteit Amsterdam, De Boelelaan 1085, 1081 HV, Amsterdam (Netherlands); Rozema, J. [Institute of Ecological Science, Department of Systems Ecology, Vrije Universiteit Amsterdam, De Boelelaan 1085, 1081 HV, Amsterdam (Netherlands); Aerts, R. [Institute of Ecological Science, Department of Systems Ecology, Vrije Universiteit Amsterdam, De Boelelaan 1085, 1081 HV, Amsterdam (Netherlands)

    2005-11-15

    We investigated concentrations of Zn, Cu, Cd and Pb in the compartments of a soil-plant (Urtica dioica)-snail (Cepaea nemoralis) food chain in four polluted locations in the Biesbosch floodplains, the Netherlands, and two reference locations. Total soil metal concentrations in the polluted locations were 4-20 times higher than those in the reference locations. Positive relationships between the generally low leaf concentrations and the soil concentrations were found for Zn only (r {sup 2} = 0.20). Bioaccumulation of Zn, Cu and Cd was observed in the snail tissues. We found positive relationships between the snail and leaf concentrations for all metals (range r {sup 2} = 0.19-0.46). The relationships between soil and snail concentrations were also positive, except for Cu (range r {sup 2} = 0.15-0.33). These results suggest transfer of metals to C. nemoralis snails from U. dioica leaves and from the soil. Metal transfer from polluted leaves to C. nemoralis is more important than transfer from the soil. - Bioaccumulation and positive snail-leaf relationships suggest metal transfer from Urtica dioica leaves to Cepaea nemoralis snails.

  7. Heavy metal concentrations in a soil-plant-snail food chain along a terrestrial soil pollution gradient

    International Nuclear Information System (INIS)

    Notten, M.J.M.; Oosthoek, A.J.P.; Rozema, J.; Aerts, R.

    2005-01-01

    We investigated concentrations of Zn, Cu, Cd and Pb in the compartments of a soil-plant (Urtica dioica)-snail (Cepaea nemoralis) food chain in four polluted locations in the Biesbosch floodplains, the Netherlands, and two reference locations. Total soil metal concentrations in the polluted locations were 4-20 times higher than those in the reference locations. Positive relationships between the generally low leaf concentrations and the soil concentrations were found for Zn only (r 2 = 0.20). Bioaccumulation of Zn, Cu and Cd was observed in the snail tissues. We found positive relationships between the snail and leaf concentrations for all metals (range r 2 = 0.19-0.46). The relationships between soil and snail concentrations were also positive, except for Cu (range r 2 = 0.15-0.33). These results suggest transfer of metals to C. nemoralis snails from U. dioica leaves and from the soil. Metal transfer from polluted leaves to C. nemoralis is more important than transfer from the soil. - Bioaccumulation and positive snail-leaf relationships suggest metal transfer from Urtica dioica leaves to Cepaea nemoralis snails

  8. Metal concentrations in surface water and sediments from Pardo River, Brazil: human health risks.

    Science.gov (United States)

    Alves, Renato I S; Sampaio, Carolina F; Nadal, Martí; Schuhmacher, Marta; Domingo, José L; Segura-Muñoz, Susana I

    2014-08-01

    Pardo River (Brazil) is suffering from an important anthropogenic impact due to the pressure of highly populated areas and the influence of sugarcane cultivation. The objective of the present study was to determine the levels of 13 trace elements (As, Be, Cd, Cr, Cu, Pb, Mn, Hg, Ni, Tl, Sn, V and Zn) in samples of surface water and sediments from the Pardo River. Furthermore, the human health risks associated with exposure to those metals through oral intake and dermal absorption were also evaluated. Spatial and seasonal trends of the data were closely analyzed from a probabilistic approach. Manganese showed the highest mean concentrations in both water and sediments, remarking the incidence of the agricultural activity and the geological characteristics within the basin. Thallium and arsenic were identified as two priority pollutants, being the most important contributors to the Hazard Index (HI). Since non-carcinogenic risks due to thallium exposure slightly exceeded international guidelines (HI>1), a special effort should be made on this trace element. However, the current concentrations of arsenic, a carcinogenic element, were in accordance to acceptable lifetime risks. Nowadays, there is a clear increasing growth in human population and economic activities in the Pardo River, whose waters have become a serious strategic alternative for the potential supply of drinking water. Therefore, environmental monitoring studies are required not only to assure that the current state of pollution of Pardo River does not mean a risk for the riverside population, but also to assess the potential trends in the environmental levels of those elements. Copyright © 2014 Elsevier Inc. All rights reserved.

  9. Pollution, toxicity, and ecological risk of heavy metals in surface river sediments of a large basin undergoing rapid economic development.

    Science.gov (United States)

    Tang, Wenzhong; Zhang, Chao; Zhao, Yu; Shan, Baoqing; Song, Zhixin

    2017-05-01

    A comprehensive and detailed investigation of heavy metal pollution, toxicity, and ecological risk assessment was conducted for the surface river sediments of the Haihe Basin in China based on 220 sampling sites selected in 2013. The average concentrations of Cr, Cu, Ni, Pb, and Zn in the sediments were 129 mg/kg, 63.4 mg/kg, 36.6 mg/kg, 50.0 mg/kg, and 202 mg/kg, respectively. As indicated by the geoaccumulation and pollution load indices, most surface river sediments of the Haihe Basin were contaminated with the investigated metals, especially in the junction region of the Zi Ya He and Hei Long Gang watersheds. The 5 heavy metals in the sediments all had anthropogenic sources, and the enrichment degrees followed the order Cu > Pb > Zn > Cr > Ni, with mean enrichment factors of 3.27, 2.77, 2.58, 1.81, and 1.44, respectively. According to the mean index of comprehensive potential ecological risk (38.9), the studied sediments of the Haihe Basin showed low potential ecological risk, but the sediments were potentially biologically toxic based on the mean probable effect concentration quotient (0.547), which may be the result of speciation of the 5 metals in the sediments. The results indicate that heavy metal pollution should be considered during the development of ecological restoration strategies in the Haihe Basin. Environ Toxicol Chem 2017;36:1149-1155. © 2016 SETAC. © 2016 SETAC.

  10. Characterization of air pollutant concentrations, fleet emission factors, and dispersion near a North Carolina interstate freeway across two seasons

    Science.gov (United States)

    Saha, Provat K.; Khlystov, Andrey; Snyder, Michelle G.; Grieshop, Andrew P.

    2018-03-01

    We present field measurement data and modeling of multiple traffic-related air pollutants during two seasons at a site adjoining Interstate 40, near Durham, North Carolina. We analyze spatial-temporal and seasonal trends and fleet-average pollutant emission factors and use our data to evaluate a line source dispersion model. Month-long measurement campaigns were performed in summer 2015 and winter 2016. Data were collected at a fixed near-road site located within 10 m from the highway edge, an upwind background site and, under favorable meteorological conditions, along downwind perpendicular transects. Measurements included the size distribution, chemical composition, and volatility of submicron particles, black carbon (BC), nitrogen oxides (NOx), meteorological conditions and traffic activity data. Results show strong seasonal and diurnal differences in spatial distribution of traffic sourced pollutants. A strong signature of vehicle emissions was observed within 100-150 m from the highway edge with significantly higher concentrations during morning. Substantially higher concentrations and less-sharp near-road gradients were observed in winter for many species. Season-specific fleet-average fuel-based emission factors for NO, NOx, BC, and particle number (PN) were derived based on up- and down-wind roadside measurements. The campaign-average NOx and PN emission factors were 20% and 300% higher in winter than summer, respectively. These results suggest that the combined effect of higher emissions and their slower downwind dispersion in winter dictate the observed higher downwind concentrations and wider highway influence zone in winter for several species. Finally, measurements of traffic data, emission factors, and pollutant concentrations were integrated to evaluate a line source dispersion model (R-LINE). The dispersion model captured the general trends in the spatial and temporal patterns in near-road concentrations. However, there was a tendency for the model

  11. A field study to evaluate the impact of different factors on the nutrient pollutant concentrations in green roof runoff.

    Science.gov (United States)

    Wang, Xiaochen; Zhao, Xinhua; Peng, Chenrui; Zhang, Xinbo; Wang, Jianghai

    2013-01-01

    The objectives of this study are to investigate the impact of different factors on the nutrient pollutant concentrations in green roof runoff and to provide reference data for the engineering design of dual substrate layer green roofs. The data were collected from eight different trays under three kinds of artificial rains. The results showed that except for total phosphorus, dual substrate layer green roofs behaved as a sink for most of the nutrient pollutants (significant at p green roof and the depth of the adsorption substrates. Compared with the influence of the substrates, the influence of the plant density and drainage systems was small.

  12. Ambient concentrations and personal exposure to polycyclic aromatic hydrocarbons (PAH) in an urban community with mixed sources of air pollution.

    Science.gov (United States)

    Zhu, Xianlei; Fan, Zhihua Tina; Wu, Xiangmei; Jung, Kyung Hwa; Ohman-Strickland, Pamela; Bonanno, Linda J; Lioy, Paul J

    2011-01-01

    Assessment of the health risks resulting from exposure to ambient polycyclic aromatic hydrocarbons (PAH) is limited by a lack of environmental exposure data among the general population. This study characterized personal exposure and ambient concentrations of PAH in the Village of Waterfront South (WFS), an urban community with many mixed sources of air toxics in Camden, New Jersey, and CopeWood/Davis Streets (CDS), an urban reference area located ∼1 mile east of WFS. A total of 54 and 53 participants were recruited from non-smoking households in WFS and CDS, respectively. In all, 24-h personal and ambient air samples were collected simultaneously in both areas on weekdays and weekends during summer and winter. The ambient PAH concentrations in WFS were either significantly higher than or comparable to those in CDS, indicating the significant impact of local sources on PAH pollution in WFS. Analysis of diagnostic ratios and correlation suggested that diesel truck traffic, municipal waste combustion and industrial combustion were the major sources in WFS. In such an area, ambient air pollution contributed significantly to personal PAH exposure, explaining 44-96% of variability in personal concentrations. This study provides valuable data for examining the impact of local ambient PAH pollution on personal exposure and therefore potential health risks associated with environmental PAH pollution.

  13. Distribution of persistent organic pollutants and trace metals in surface waters in the Seversky Donets River basin (Eastern Ukraine)

    Science.gov (United States)

    Diadin, Dmytro; Celle-Jeanton, Hélène; Steinmann, Marc; Loup, Christophe; Crini, Nadia; Vystavna, Yuliya; Vergeles, Yuri; Huneau, Frédéric

    2017-04-01

    The paper is focused on surface water of the Seversky Donets River Basin in Eastern Ukraine which undergoes significant anthropogenic pressure due to municipal and industrial wastewater discharge, polluted runoff from both urban and agricultural areas, leakages at oil-gas extraction sites located in the region. In these conditions the Seversky Donets River is used for drinking water supply of the city of Kharkiv with 1.5 million inhabitants as well as other smaller settlements in the basin. The diversity of water pollution sources makes it reasonable to use complex indicators and assessment approaches such as combination of organic and inorganic pollutants. We have studied the distribution of major ions, metals and persistent organic compounds (PAHs and PCBs) in water of the Seversky Donets River and its tributaries. In total 20 sites have been sampled on the river catchment area as of 4.5 thousands km2. PAHs and PCBs were measured in surface water for the first time in the region. The most distinctive transformations of water composition have been found downstream wastewater treatment plants in the city of Kharkiv where treated mixture of municipal and industrial wastewater is discharged to the river. Such metals as Ni, Zn, Cr in combination with phosphates and nitrates has shown significant positive correlation indicating the common source of their input. Ten of sixteen total PAHs were detected in measurable concentrations in at least one sample of river water. Sum of PAHs ranged from 15.3 to 117.2 ng/L with mean of 43.8 ng/L. The ratios of PAHs have indicated rather pyrogenic than petrogenic inputs on all the studied sites. Elevated concentrations of low molecular weight PAHs in water were found close to a coal-burning power station and a coke chemical plant also confirming their origin from coal combustion and subsequent atmospheric deposition. PCBs distribution has appeared to be relatively uniform on the territory despite the vast area of the basin researched

  14. Response of soil microbial activity and biodiversity in soils polluted with different concentrations of cypermethrin insecticide.

    Science.gov (United States)

    Tejada, Manuel; García, Carlos; Hernández, Teresa; Gómez, Isidoro

    2015-07-01

    We performed a laboratory study into the effect of cypermethrin insecticide applied to different concentrations on biological properties in two soils [Typic Xerofluvent (soil A) and Xerollic Calciorthid (soil B)]. Two kg of each soil were polluted with cypermethrin at a rate of 60, 300, 600, and 1,200 g ha(-1) (C1, C2, C3, and C4 treatments). A nonpolluted soil was used as a control (C0 treatment). For all treatments and each experimental soil, soil dehydrogenase, urease, β-glucosidase, phosphatase, and arylsulphatase activities and soil microbial community were analysed by phospholipid fatty acids, which were measured at six incubation times (3, 7, 15, 30, 60, and 90 days). The behavior of the enzymatic activities and microbial population were dependent on the dose of insecticide applied to the soil. Compared with the C0 treatment, in soil A, the maximum inhibition of the enzymatic activities was at 15, 30, 45, and 90 days for the C1, C2, C3, and C4 treatments, respectively. However, in soil B, the maximum inhibition occurred at 7, 15, 30, and 45 days for the C1, C2, C3, and C4 treatments, respectively. These results suggest that the cypermethrin insecticide caused a negative effect on soil enzymatic activities and microbial diversity. This negative impact was greater when a greater dose of insecticide was used; this impact was also greater in soil with lower organic matter content. For both soils, and from these respective days onward, the enzymatic activities and microbial populations progressively increased by the end of the experimental period. This is possibly due to the fact that the insecticide or its breakdown products and killed microbial cells, subsequently killed by the insecticide, are being used as a source of energy or as a carbon source for the surviving microorganisms for cell proliferation.

  15. Snow cover as a source of technogenic pollution of surface water during the snow melting period

    OpenAIRE

    Labuzova Olga; Noskova Tatyana; Lysenko Maria; Ovcharenko Elena; Papina Tatyana

    2016-01-01

    The study of pollutants in melt water of snow cover and snow disposal sites in the city of Barnaul showed that during the snow melting period the surface water is not subjected to significant technogenic impact according to a number of studied indices. The oils content is an exception: it can exceed MAC more than 20 times in river- water due to the melting of city disposal sites. Environmental damage due to an oils input into water resources during the snow melting period...

  16. Metal concentration at surface water using multivariate analysis and ...

    African Journals Online (AJOL)

    This study defined the concentration of metals in Kerteh and Paka River water and their potential health risk towards human. 54 water samples were collected and analyzed using ICP-OES. Results revealed that most of the stations in Kerteh River gave the higher concentration of Cd, Cu, Zn, Co, Ni, As, Cr and Pb compared ...

  17. 77 FR 42679 - National Pollutant Discharge Elimination System (NPDES) Concentrated Animal Feeding Operation...

    Science.gov (United States)

    2012-07-20

    ... nitrogen, phosphorus, pathogens, and other pollutants. The EPA continues to believe that the gathering and... topographic map of the geographic area in which the CAFO is located showing the specific location of the...

  18. Study on measuring social cost of water pollution: concentrated on Han River water system

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kwang Im; Min, Dong Gee; Chung, Hoe Seong; Lim, Hyun Jeong; Kim, Mee Sook [Korea Environment Institute, Seoul (Korea)

    1999-12-01

    Following the economic development and the progress of urbanization, the damage on water pollution has been more serious but a social cost caused by water pollution cannot be measured. Although the need of water quality preservation is emphasized, a base material for public investment on enhancing water quality preservation is not equipped yet due to the absence of economic values of water resource. Therefore it measured a cost generated by leaving pollution not treated water quality in this study. To measure the usable value of water resource or the cost of water pollution all over the country should include a national water system, but this study is limited on the mainstream of Han River water system from North Han River through Paldang to Chamsil sluice gates. Further study on Nakdong River and Keum River water systems should be done. 74 refs., 4 figs., 51 tabs.

  19. Surfaces: processing, coating, decontamination, pollution, etc. Surface mastering to prevent component corrosion

    International Nuclear Information System (INIS)

    Foucault, M.

    2012-01-01

    In the primary and secondary circuits of nuclear Pressurized Water Reactors, AREVA uses several nickel-based alloys or austenitic stainless steels for the manufacture of safety components. The experience feedback of the last twenty years allows us to point out the major role hold by the component surface state in their life duration. In this paper, we present four examples of problem encountered and solved by a surface study and the definition and implementation of processes for the surface control of the repaired components. Then, we propose some ideas about the present needs in term of analysis means to improve the surface knowledge and control of the manufactured components. (author)

  20. Organic and Inorganic Pollutant Concentrations Suggest Anthropogenic Contamination of Soils Along the Manali-Leh Highway, Northwestern Himalaya, India.

    Science.gov (United States)

    Dasgupta, Rajarshi; Crowley, Brooke E; Barry Maynard, J

    2017-05-01

    Most studies on roadside soil pollution have been performed in areas where petrol is the main fuel. Very little work has been conducted in regions where diesel predominates. We collected soil samples from four sites that span a precipitation gradient along the Manali-Leh Highway in northwestern Himalaya, India. This road traverses rough terrain and most of the vehicles that travel along it are diesel-driven. At each site, we collected samples at incremental distances from the highway (0, 2, 5, 10, 20, and 150 m), and at each distance we collected samples from three depths (3, 9, and 15 cm). We assessed the concentrations of 10 heavy metals (Al, Fe, Cr, Cu, Pb, Ni, Co, Zn, V, and Ba), total sulphur, and total organic carbon (TOC) at each distance, and we measured the concentration of 16 polycyclic aromatic hydrocarbons (PAHs) at 2 m from the highway. Overall, we found that metal concentrations are low and there is no relationship between concentrations and distance from the highway, or depth within the soil profile. Sulphur concentrations, on the other hand, are high in roadside soils and there is a negative relationship between concentration and distance from the highway. PAH concentrations are low, but the proportion of different ringed species suggests that their source is anthropogenic. Correlations between TOC and the various pollutants further suggest that diesel vehicles and potentially biomass combustion are starting to affect the roadside environment in remote northwestern India. We suggest that pollutant concentrations be regularly monitored.

  1. Estimating daily surface NO2 concentrations from satellite data - a case study over Hong Kong using land use regression models

    Science.gov (United States)

    Anand, Jasdeep S.; Monks, Paul S.

    2017-07-01

    Land use regression (LUR) models have been used in epidemiology to determine the fine-scale spatial variation in air pollutants such as nitrogen dioxide (NO2) in cities and larger regions. However, they are often limited in their temporal resolution, which may potentially be rectified by employing the synoptic coverage provided by satellite measurements. In this work a mixed-effects LUR model is developed to model daily surface NO2 concentrations over the Hong Kong SAR during the period 2005-2015. In situ measurements from the Hong Kong Air Quality Monitoring Network, along with tropospheric vertical column density (VCD) data from the OMI, GOME-2A, and SCIAMACHY satellite instruments were combined with fine-scale land use parameters to provide the spatiotemporal information necessary to predict daily surface concentrations. Cross-validation with the in situ data shows that the mixed-effects LUR model using OMI data has a high predictive power (adj. R2 = 0. 84), especially when compared with surface concentrations derived using the MACC-II reanalysis model dataset (adj. R2 = 0. 11). Time series analysis shows no statistically significant trend in NO2 concentrations during 2005-2015, despite a reported decline in NOx emissions. This study demonstrates the utility in combining satellite data with LUR models to derive daily maps of ambient surface NO2 for use in exposure studies.

  2. Assessment of heavy metal pollution in surface soils and plant material in the post-industrial city of Katowice, Poland.

    Science.gov (United States)

    Steindor, Karolina A; Franiel, Izabella J; Bierza, Wojciech M; Pawlak, Beata; Palowski, Bernard F

    2016-01-01

    This investigation was undertaken to assess the level of environment pollution by biological monitoring. The leaves and bark of popular ornamental trees Acer pseudoplatanus L. and Acer platanoides L. and soil from the sampling sites were used to perform heavy metals pollution monitoring in urban areas with different pollution sources, as well to investigate the suitability of the leaves and bark as bioindicators of Pb, Zn, Cd and Cu pollution. Plant samples were collected at nine locations classified into three pollution groups based on metal content in the soils. The chosen pollution indices were used to assess the level of contamination according to background values. Soils in the Katowice area are found to be relatively heavily contaminated with Pb, Zn and Cd. Both of the maple tree species did not statistically differ in terms of the investigated elements' concentration in leaves or bark. Only bark samples reflected the pollution level, showing differences between the sampling points, and therefore are recommended for biomonitoring purposes.

  3. Monitoring of petroleum hydrocarbon pollution in surface waters by a direct comparison of fluorescence spectroscopy and remote sensing techniques

    Energy Technology Data Exchange (ETDEWEB)

    De Domenico, L.; Crisafi, E. (Consiglio Nazionale delle Ricerche, Messina (Italy). Thalassografic Inst.); Magazzu, G. (Lecce Univ. (Italy). Dept. of Biology); Puglisi, A. (Mediterranean Oceanological Centre (CEOM), Palermo (Italy)); La Rosa, A. (Air-Survey, Italy s.r.l., Catania (Italy))

    1994-10-01

    Oil pollution levels were estimated using simultaneous acquisition of data from remote sensing by helicopter and fluorescence spectroscopy on surface samples. Laboratory quantitative analysis of hydrocarbons was used to calibrate remotely sensed data. The data were treated using a computer to generate a colour-coded map not attainable with conventional methods representing seawater pollution. Results were in good agreement and indicated that remotely sensed data together with those achieved by fluorescence spectroscopy are applicable for monitoring hydrocarbon pollution. (author)

  4. The analysis of results received from the programme for calculating the concentration of pollutants from vehicles with internal combustion engines on the crossroads in urban environments

    International Nuclear Information System (INIS)

    Tashevski, Done; Dimitrovski, Mile

    1995-01-01

    The analysis of results and influence of specified factors on the concentration of pollutants on the crossroads with chosen characteristic conditions has been made, on the basis of the programme for calculating the concentration of pollutants from vehicles with internal combustion engines on the crossroads in urban environments. (author)

  5. Concentration Levels, Pollution Characteristics and Potential Ecological Risk of Dust Heavy Metals in the Metropolitan Area of Beijing, China.

    Science.gov (United States)

    Xiong, Qiulin; Zhao, Wenji; Zhao, Jiayin; Zhao, Wenhui; Jiang, Lei

    2017-09-30

    This study aims to investigate the concentration levels, pollution characteristics and the associated potential ecological risks of the heavy metals found in dust in the metropolitan area of Beijing, China during the winter. Dust samples were collected at 49 different spatial locations of Beijing's metropolitan area from November 2013 to January 2014, in which the concentration levels of Cd, Cr, Pb, Cu, Zn, Ni, Co, V, Bi and Mo were measured by Elan DRC II type inductively coupled plasma mass spectrometry (ICP-MS). Test results showed that the concentrations of dust heavy metals Pb, Cr, Cu and Zn in the urban areas (147.1 mg·kg -1 , 195.9 mg·kg -1 , 239.2 mg·kg -1 and 713.2 mg·kg -1 ) were significantly higher than those in the suburbs (91.6 mg·kg -1 , 125.1 mg·kg -1 , 131.9 mg·kg -1 and 514.5 mg·kg -1 ). Enrichment factors and the geo-accumulation index were used to describe the pollution characteristics of dust heavy metals in urban and suburban areas. Results indicated that Zn and Cu were moderately polluting in both urban and suburban areas, Cd was severely polluting in urban areas and heavily polluting in the suburbs. Furthermore, potential ecological risk assessment revealed that the degrees of ecological harm of dust heavy metals were very strong in both urban and suburban areas, but especially in urban areas. The potential ecological risk of heavy metal Cd, whose single factor of ecological damage was extremely strong, accounted for about 90% of the total ecological risk.

  6. A comparison of strategies for estimation of ultrafine particle number concentrations in urban air pollution monitoring networks

    International Nuclear Information System (INIS)

    Reggente, Matteo; Peters, Jan; Theunis, Jan; Van Poppel, Martine; Rademaker, Michael; De Baets, Bernard; Kumar, Prashant

    2015-01-01

    We propose three estimation strategies (local, remote and mixed) for ultrafine particles (UFP) at three sites in an urban air pollution monitoring network. Estimates are obtained through Gaussian process regression based on concentrations of gaseous pollutants (NOx, O 3 , CO) and UFP. As local strategy, we use local measurements of gaseous pollutants (local covariates) to estimate UFP at the same site. As remote strategy, we use measurements of gaseous pollutants and UFP from two independent sites (remote covariates) to estimate UFP at a third site. As mixed strategy, we use local and remote covariates to estimate UFP. The results suggest: UFP can be estimated with good accuracy based on NOx measurements at the same location; it is possible to estimate UFP at one location based on measurements of NOx or UFP at two remote locations; the addition of remote UFP to local NOx, O 3 or CO measurements improves models' performance. - Highlights: • UFP number concentrations are estimated using Gaussian process regression. • The independent variables include local and/or remote gaseous measurements. • Three modelling strategies (local, remote and mixed) used for UFP estimations. • NOx was the most important independent variable. • The best models explained >90% of the variance. - UFP can be estimated with good accuracy at one location based on NOx measurements at the same location and based on measurements of NOx or UFP at two remote locations

  7. Pollution

    NARCIS (Netherlands)

    Reijnders, P.J.H.; Borrell, P.J.H.; Franeker, van J.A.; Aguilar, A.

    2017-01-01

    Awareness of the threat of environmental contaminants to marine mammals is widespread. High concentration of certain compounds in the tissues of these animals has been associated with organ anomalies, impaired reproduction, and immune function and, as a consequence of the latter, with the occurrence

  8. Tracing sewage pollution using linear alkylbenzenes (LABs) in surface sediments at the south end of the Southern California Bight

    International Nuclear Information System (INIS)

    Macias-Zamora, J.V.; Ramirez-Alvarez, N.

    2004-01-01

    Distribution and isomeric composition of LABs in surface marine sediments were evaluated at the southern end of the southern California Bight. LABs are used as tracers of wastewater discharges. The area studied extends from the Mexico-USA border to the Todos Santos Bay, Baja California in the south. The area was partitioned into a northern, central and a southern stratum. GC-MS was used for the analysis of LABs concentration. The average value of total LABs concentration was 17.4, 32.0 and 24.9 ng/g for the north, central and southern strata, respectively. LABs were not correlated with either sediments grain size (% 10 , LAB 11 ) showed enrichment. It was found that 67 out of the 68 stations measured had concentrations above detection limits. This suggests extensive contact of wastewater discharges with marine sediments in the area. An estimate of the amount of LABs per year based on detergent consumption per capita is provided. - Linear alkylbenzenes were used to trace the distribution of sewage pollution of surface marine sediments

  9. Atmospheric Transference of the Toxic Burden of Atmosphere-Surface Exchangeable Pollutants to the Great Lakes Region

    Science.gov (United States)

    Kumar, A.; Perlinger, J. A.; Giang, A.; Zhang, H.; Selin, N. E.; Wu, S.

    2016-12-01

    Toxic pollutants that share certain chemical properties undergo repeated emission and deposition between Earth's surfaces and the atmosphere. Following their emission through anthropogenic activities, they are transported locally, regionally or globally through the atmosphere, are deposited, and impact local ecosystems, in some cases as a result of bioaccumulation in food webs. We call them atmosphere-surface exchangeable pollutants or "ASEPs", wherein this group is comprised of thousands of chemicals. We are studying potential future contamination in the Great Lakes region by modeling scenarios of the future for three compounds/compound classes, mercury, polychlorinated biphenyl compounds, and polycyclic aromatic hydrocarbons. In this presentation we focus on mercury and future scenarios of contamination of the Great Lake region. The atmospheric transport of mercury under specific scenarios will be discussed. The global 3-D chemical transport model GEOS-Chem has been applied to estimate future atmospheric concentrations and deposition rates of mercury in the Great Lakes region for selected future scenarios of emissions and climate. We find that, assuming no changes in climate, annual mean net deposition flux of mercury to the Great Lakes Region may increase by approximately 50% over 2005 levels by 2050, without global or regional policies addressing mercury, air pollution, and climate. In contrast, we project that the combination of global and North American action on mercury could lead to a 21% reduction in deposition from 2005 levels by 2050. US action alone results in a projected 18% reduction over 2005 levels by 2050. We also find that, assuming no changes in anthropogenic emissions, climate change and biomass burning emissions would, respectively, cause annual mean net deposition flux of mercury to the Great Lakes Region to increase by approximately 5% and decrease by approximately 2% over 2000 levels by 2050.

  10. Influence of TiO{sub 2} Surface Properties on Water Pollution Treatment and Photocatalytic Activity

    Energy Technology Data Exchange (ETDEWEB)

    Zeng, Min [Southwest Univ. of Science and Technology, Mianyang (China)

    2013-03-15

    The titania surface showed different characteristics depending on the charge of the dye molecules. Compared with the MB molecules, the negatively charged MO molecules strongly adsorbed on the titania surface. Furthermore, the decomposition kinetics of the dye molecules by the photocatalytic activity also deepened with the charge of the dye molecules. The relation between the UV irradiation time and the molar ratio of the decomposed dye molecules followed the Avrami equation. According to the results of the analysis by using the Avrami equation, the MO molecules were decomposed on the titania particle surface. In contrast, the MB molecules were decomposed in the aqueous solution. The difference in kinetics was related to the interaction of the dye molecules and the titania surface. These preferential adsorption and decomposition characteristics will improve its applications in water pollution treatment.

  11. Analysis of Surface Water Pollution Accidents in China: Characteristics and Lessons for Risk Management

    Science.gov (United States)

    Yao, Hong; Zhang, Tongzhu; Liu, Bo; Lu, Feng; Fang, Shurong; You, Zhen

    2016-04-01

    Understanding historical accidents is important for accident prevention and risk mitigation; however, there are no public databases of pollution accidents in China, and no detailed information regarding such incidents is readily available. Thus, 653 representative cases of surface water pollution accidents in China were identified and described as a function of time, location, materials involved, origin, and causes. The severity and other features of the accidents, frequency and quantities of chemicals involved, frequency and number of people poisoned, frequency and number of people affected, frequency and time for which pollution lasted, and frequency and length of pollution zone were effectively used to value and estimate the accumulated probabilities. The probabilities of occurrences of various types based on origin and causes were also summarized based on these observations. The following conclusions can be drawn from these analyses: (1) There was a high proportion of accidents involving multi-district boundary regions and drinking water crises, indicating that more attention should be paid to environmental risk prevention and the mitigation of such incidents. (2) A high proportion of accidents originated from small-sized chemical plants, indicating that these types of enterprises should be considered during policy making. (3) The most common cause (49.8 % of the total) was intentional acts (illegal discharge); accordingly, efforts to increase environmental consciousness in China should be enhanced.

  12. Blautia and Prevotella sequences distinguish human and animal fecal pollution in Brazil surface waters.

    Science.gov (United States)

    Koskey, Amber M; Fisher, Jenny C; Eren, A Murat; Ponce-Terashima, Rafael; Reis, Mitermayer G; Blanton, Ronald E; McLellan, Sandra L

    2014-12-01

    Untreated sewage discharges and limited agricultural manure management practices contribute to fecal pollution in rural Brazilian waterways. Most microbial source tracking studies have focused on Bacteroidales, and few have tested host-specific indicators in underdeveloped regions. Sequencing of sewage and human and animal feces with Illumina HiSeq revealed Prevotellaceae as the most abundant family in humans, with Lachnospiraceae and Ruminococcaceae also comprising a large proportion of the microbiome. These same families were also dominant in animals. Bacteroides, the genus containing the most commonly utilized human-specific marker in the United States was present in very low abundance. We used oligotyping to identify Prevotella and Blautia sequences that can distinguish human fecal contamination. Thirty-five of 61 Blautia oligotypes and 13 of 108 Prevotella oligotypes in humans were host-specific or highly abundant (i.e. host-preferred) compared to pig, dog, horse and cow sources. Certain human Prevotella and Blautia oligotypes increased more than an order of magnitude along a polluted river transect in rural Brazil, but traditional fecal indicator levels followed a steady or even decreasing trend. While both Prevotella and Blautia oligotypes distinguished human and animal fecal pollution in Brazil surface waters, Blautia appears to contain more discriminatory and globally applicable markers for tracking sources of fecal pollution. © 2014 Society for Applied Microbiology and John Wiley & Sons Ltd.

  13. Locating Shallow Groundwater Discharge to Streams Near Concentrated Animal Feeding Operations Using Aerial Infrared Thermography: A Novel Potential Pollution Detection Method

    Science.gov (United States)

    Mapes, K. L.; Pricope, N. G.

    2017-12-01

    The Cape Fear River Basin (CFRB) has some of the highest densities of concentrated animal feeding operations (CAFO) in the United States (factoryfarmmap.org) and was recently named one of the country's most endangered rivers (americanrivers.org). There is high potential for CAFO land use to degrade stream water quality by introducing pollutants, primarily nitrates and fecal coliform, into sub-surface and surface waters. The regionally high water table in the Lower CFRB increases the risk of water quality degradation due to increased connectivity of ground- and surface water. The Lower CFRB is periodically subjected to frequent or intense hurricanes, which have been shown to exacerbate water quality issues associated with CAFOs. Additionally, the growing population in this region is placing more pressure on an already taxed water source and will continue to rely on the Cape Fear River for drinking water and wastewater discharge. While there are documented occurrences of groundwater contamination from CAFOs, we still have little understanding on how and where pollution may be entering streams by shallow sub-surface discharge. Shallow groundwater discharge to streams is becoming easier to detect using thermal infrared imaging cameras onboard unmanned aerial systems. The temperature differences between groundwater and stream water are easily distinguished in the resulting images. While this technology cannot directly measure water quality, it can locate areas of shallow groundwater discharge that can later be tested for pollutants using conventional methods. We will utilize a thermal infrared camera onboard a SenseFly eBee Plus to determine the feasibility of using this technology on a larger scale within the Lower CFRB as an inexpensive means of identifying sites of potential pollution input. Aerial surveys will be conducted in two sub-watersheds: one containing swine CAFO and a control that lacks swine CAFO. Information from this study can be integrated into

  14. Assessing heavy metal pollution in the surface soils of a region that had undergone three decades of intense industrialization and urbanization.

    Science.gov (United States)

    Hu, Yuanan; Liu, Xueping; Bai, Jinmei; Shih, Kaimin; Zeng, Eddy Y; Cheng, Hefa

    2013-09-01

    Heavy metals in the surface soils from lands of six different use types in one of the world's most densely populated regions, which is also a major global manufacturing base, were analyzed to assess the impact of urbanization and industrialization on soil pollution. A total of 227 surface soil samples were collected and analyzed for major heavy metals (As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb, and Zn) by using microwave-assisted acid digestion and inductively coupled plasma-mass spectrometry (ICP-MS). Multivariate analysis combined with enrichment factors showed that surface soils from the region (>7.2 × 10(4) km(2)) had mean Cd, Cu, Zn, and As concentrations that were over two times higher than the background values, with Cd, Cu, and Zn clearly contributed by anthropogenic sources. Soil pollution by Pb was more widespread than the other heavy metals, which was contributed mostly by anthropogenic sources. The results also indicate that Mn, Co, Fe, Cr, and Ni in the surface soils were primarily derived from lithogenic sources, while Hg and As contents in the surface soils were controlled by both natural and anthropogenic sources. The pollution level and potential ecological risk of the surface soils both decreased in the order of: urban areas > waste disposal/treatment sites ∼ industrial areas > agricultural lands ∼ forest lands > water source protection areas. These results indicate the significant need for the development of pollution prevention and reduction strategies to reduce heavy metal pollution for regions undergoing fast industrialization and urbanization.

  15. Spatial differences in persistent organochlorine pollutant concentrations between the Bering and Chukchi Seas (1993).

    Science.gov (United States)

    Strachan, W M; Burniston, D A; Williamson, M; Bohdanowicz, H

    2001-01-01

    During August-September 1993, a joint Russian-United States expedition to the Bering and Chukchi Seas took place. Surface water samples were collected from 21 sites and separated into dissolved (duplicates) and suspended solids; 19 sediment and 6 air samples were also collected. These samples were analysed for 19 organochlorine pesticides, 11 chlorobenzenes and 113 PCB congeners. The report provides data on selected compounds which occured in > or = 75% of the water samples. Highest water concentrations were observed for HCH in open waters north and south of the Bering Strait, both regions being similar (alpha-HCH; 2.2 ng/L and lindane: 0.35 ng/L). Air levels observed were also constant (alpha-HCH; 0.041 ng/m3, lindane: 0.0093 ng/m3). Suspended solids and air particulares contributed little to the concentrations in their respective media, an observation common to all analytes except for the PCBs and the DDT residues. The sum of PCB concentrations in water were higher in the Bering Sea area compared to the Chukchi Sea (1.0 vrs 0.67 ng/L) and lower for air (0.46 vrs 0.23 ng/m3). Sum of DDT in water was higher in the Bering Sea than in the Chukchi Sea (0.23 vrs 0.15 ng/L) while in sediments and air, the Bering Sea concentrations were lower (0.95 vrs 1.6 ng/g and 36 vrs 56 pg/m3, respectively). Other organochlorine compounds for which data are presented include: pp'-DDE, pp'-DDT, dieldrin, HCB, 3 chlorobenzenes and 3 PCB congeners. Fluxes of all these chemicals through the Berin Strait are estimated; they ranged from 57 t/a (alpha-HCH) through 26 t/a (for sum of PCBs) to 0.2 t/a (pp'-DDE, dieldrin and 1,2,3-trichlorobenzene). Fugacity ratios for the HCHs and PCBs indicate the alpha-HCH is degassing in both the Bering and Chukchi Seas and that the gamma-isomer is degassing in the Bering Sea and is close to equilibrium (weakly absorbing) in the Chuchi Sea; the sum of PCBs are strongly absorbing in both areas.

  16. Petroleum Hydrocarbon Pollution in Soil and Surface Water by Public Oil Fields in Wonocolo Sub-district, Indonesia

    Directory of Open Access Journals (Sweden)

    Gina Lova Sari

    2018-03-01

    Full Text Available Public crude oil fields in Wonocolo sub-district were active from 1942 until now and have inadequately operated. The aims of this research were to measure the level of total petroleum hydrocarbon (TPH pollution and their distribution in soil and surface water at the Wonocolo public crude oil fields. Twelve composite soil samples were collected from uncontaminated and contaminated sites of old well (OW, transportation line (T, and refinery area (R at the depths of 0–30 cm, 30–60 cm, and 60–90 cm. The composite surface water sample was obtained from two points with different distances from the river side. TPH from soil and surface water samples were extracted using soxhlet and gravimetric method. Quantification of TPH was performed using Fourier Transform Infrared (FT-IR Spectrometer. From the results of this study, it was concluded that soils and surface water are contaminated by TPH of 119.80–107,190 µg/g and 211,025.73 µg/L, respectively. TPH is clearly located in the upper of 0–30 cm depth at OW, T, and R sites (52,328.14–107,189.63 µg/g. These concentrations exceeded the soil quality standard of TPH and classified as category A for human hazard risk. The findings from this study show that there are considerable health risks which are potentially poisonous to humans in the local area. We recommend that remediation could be conducted using biological methods to reduce TPH pollution level.

  17. BAERLIN2014 – the influence of land surface types on and the horizontal heterogeneity of air pollutant levels in Berlin

    Directory of Open Access Journals (Sweden)

    B. Bonn

    2016-06-01

    -wise measurement of volatile organic compounds (VOCs at representative sites for traffic- and vegetation-affected sites. The quantification displayed notable horizontal heterogeneity of the short-lived gases and particle number concentrations. For example, baseline concentrations of the traffic-related chemical species CO and NO varied on average by up to ±22.2 and ±63.5 %, respectively, on the scale of 100 m around any measurement location. Airborne observations revealed the dominant source of elevated urban particulate number and mass concentrations being local, i.e., not being caused by long-range transport. Surface-based observations related these two parameters predominantly to traffic sources. Vegetated areas lowered the pollutant concentrations substantially with ozone being reduced most by coniferous forests, which is most likely caused by their reactive biogenic VOC emissions. With respect to the overall potential to reduce air pollutant levels, forests were found to result in the largest decrease, followed by parks and facilities for sports and leisure. Surface temperature was generally 0.6–2.1 °C lower in vegetated regions, which in turn will have an impact on tropospheric chemical processes. Based on our findings, effective future mitigation activities to provide a more sustainable and healthier urban environment should focus predominantly on reducing fossil-fuel emissions from traffic as well as on increasing vegetated areas.

  18. Transport and dispersion of pollutants in surface impoundments: a finite element model

    International Nuclear Information System (INIS)

    Yeh, G.T.

    1980-07-01

    A surface impoundment model in finite element (SIMFE) is presented to enable the simulation of flow circulations and pollutant transport and dispersion in natural or artificial lakes, reservoirs or ponds with any number of islands. This surface impoundment model consists of two sub-models: hydrodynamic and pollutant transport models. Both submodels are simulated by the finite element method. While the hydrodynamic model is solved by the standard Galerkin finite element scheme, the pollutant transport model can be solved by any of the twelve optional finite element schemes built in the program. Theoretical approximations and the numerical algorithm of SIMFE are described. Detail instruction of the application are given and listing of FORTRAN IV source program are provided. Two sample problems are given. One is for an idealized system with a known solution to show the accuracy and partial validation of the models. The other is applied to Prairie Island for a set of hypothetical input data, typifying a class of problems to which SIMFE may be applied

  19. Transport and dispersion of pollutants in surface impoundments: a finite element model

    Energy Technology Data Exchange (ETDEWEB)

    Yeh, G.T.

    1980-07-01

    A surface impoundment model in finite element (SIMFE) is presented to enable the simulation of flow circulations and pollutant transport and dispersion in natural or artificial lakes, reservoirs or ponds with any number of islands. This surface impoundment model consists of two sub-models: hydrodynamic and pollutant transport models. Both submodels are simulated by the finite element method. While the hydrodynamic model is solved by the standard Galerkin finite element scheme, the pollutant transport model can be solved by any of the twelve optional finite element schemes built in the program. Theoretical approximations and the numerical algorithm of SIMFE are described. Detail instruction of the application are given and listing of FORTRAN IV source program are provided. Two sample problems are given. One is for an idealized system with a known solution to show the accuracy and partial validation of the models. The other is applied to Prairie Island for a set of hypothetical input data, typifying a class of problems to which SIMFE may be applied.

  20. Pollutant concentration profile reconstruction using digital soft sensors for biodegradation and exposure assessment in the presence of model uncertainty.

    Science.gov (United States)

    Kazantzis, Nikolaos; Kazantzi, Vasiliki; Christodoulou, Emmanuel G

    2014-01-01

    A new approach to the problem of environmental hazard assessment and monitoring for pollutant biodegradation reaction systems in the presence of uncertainty is proposed using soft sensor-based pollutant concentration dynamic profile reconstruction techniques. In particular, a robust reduced-order soft sensor is proposed that can be digitally implemented in the presence of inherent complexity and the inevitable model uncertainty. The proposed method explicitly incorporates all the available information associated with a process model characterized by varying degrees of uncertainty, as well as available sensor measurements of certain physicochemical quantities. Based on the above information, a reduced-order soft sensor is designed enabling the reliable reconstruction of pollutant concentration profiles in complex biodegradation systems that can not be always achieved due to physical and/or technical limitations associated with current sensor technology. The option of using the aforementioned approach to compute toxic load and persistence indexes on the basis of the reconstructed concentration profiles is also pursued. Finally, the performance of the proposed method is evaluated in two illustrative environmental hazard assessment case studies.

  1. Complex Surface Concentration Gradients by Stenciled "Electro Click Chemistry"

    DEFF Research Database (Denmark)

    Hansen, Thomas Steen; Lind, Johan Ulrik; Daugaard, Anders Egede

    2010-01-01

    Complex one- or two-dimensional concentration gradients of alkynated molecules are produced on azidized conducting polymer substrates by stenciled "electro click chemistry". The latter describes the local electrochemical generation of catalytically active Cu(I) required to complete a "click...... reaction" between alkynes and azides at room temperature. A stencil on the counter electrode defines the shape and multiplicity of the gradient(s) on the conducting polymer substrate, while the specific reaction conditions control gradient steepness and the maximum concentration deposited. Biologically...

  2. Spatial Evaluation of Heavy Metals Concentrations in the Surface Sediment of Taihu Lake

    Science.gov (United States)

    Niu, Yong; Jiao, Wei; Yu, Hui; Niu, Yuan; Pang, Yong; Xu, Xiangyang; Guo, Xiaochun

    2015-01-01

    With regard to the size of China’s freshwater lakes, Taihu Lake ranks third and it plays an important role in the supply of drinking water, flood prevention, farming and navigation, as well as in the travelling industry. The problem of environmental pollution has attracted widespread attention in recent years. In order to understand the levels, distribution and sources of heavy metals in sediments of Taihu Lake, random selection was carried out to obtain 59 samples of surface sediment from the entire lake and study the concentrations of Pb, Cd, Cu, Zn, Cr and Ni. Toxic units were also calculated to normalize the toxicities caused by various heavy metals. As a result, Cd and Cu in sediment were considered lower than the effect range low (ERL) at all regions where samples were gathered, while Pb and Ni were categorized into ERL-effect range median (ERM) at over 22% of the regions where samples were obtained. Nevertheless, all average concentrations of the samples were below the level of potential effect. According to the findings of this research, significant spatial heterogeneity existed in the above heavy metals. In conclusion, the distribution areas of heavy metals with higher concentrations were mainly the north bays, namely Zhushan Bay, Meiliang Bay as well as Gonghu Bay. The distribution areas of Cu, Zn, Cr and Ni with higher concentration also included the lake’s central region, whereas the uniform distribution areas of those with lower concentrations were the lake’s southeast region. In addition, it was most probable that the spatial distribution of heavy metals was determined by river inputs, whereas atmospheric precipitation caused by urban and traffic contamination also exerted considerable effects on the higher concentrations of Pb and Cd. Through evaluating the total amount of toxic units (ΣTU), it was found that higher toxicity existed primarily in the north bays and central region of the lake. If the heavy metals were sorted by the reduction of

  3. Effect of depositional environment and sources of pollution on uranium concentration in sediment, coral, algae and seagrass species from the Gulf of Aqaba (Red Sea)

    International Nuclear Information System (INIS)

    Abu-Hilal, A.H.

    1994-01-01

    Uranium concentrations were determined in sediment samples, four hard and two soft corals, one seagrass and four species of algae collected from phosphate-polluted sites in the northern reef area of the Gulf of Aqaba. High uranium concentrations were found in all samples examined from a phosphate-polluted site near a phosphate loading berth compared to the unpolluted ones. Uranium levels, U/Ca ratios, concentration and discrimination factors were also high compared to those reported from other regions of the world. The effects of the exported raw phosphate powder as the main source of pollution and depositional environment on the concentration of uranium in the examined species are discussed. (Author)

  4. Photochemical smog pollution in the Bangkok Metropolitan Region of Thailand in relation to O 3 precursor concentrations and meteorological conditions

    Science.gov (United States)

    Zhang, B.-N.; Kim Oanh, N. T.

    Analysis of photochemical pollution was done using the available 5-yr monitoring data (1996-2000) from 11 monitoring stations in Bangkok and 5 stations in other surrounding provinces, i.e. the Bangkok Metropolitan Region (BMR). Status and trend of O 3 as well as the monthly and diurnal variations were analyzed in relation to the local meteorological conditions as well as the regional transport of pollutants associated with the monsoon. The O 3 in Bangkok was found to be typical for the polluted urban areas with a lower concentration in the city center, especially at curbside stations, and higher concentration at the downwind locations. O 3 pollution was highest in 1997 with the maximum hourly average of 370 ppbv and the total hours exceeding the national hourly O 3 standard (100 ppbv) of 314 h, which is most likely related to the strong El Niño and the forest fire in Southeast Asia in this year. Meteorology-unadjusted trend shows a slight increase in O 3 from 1998 to 2000. Local emission and photochemistry are mainly responsible for O 3 episodes in the BMR. Seasonal fluctuations of O 3, however, were found to relate to the regional transport associated with the Asian monsoon. Highest O 3 pollution was found in the period from January to April (winter and local summer) and lowest during mid-rainy season, August. The O 3 increase isopleth diagram was constructed which shows that O 3 production in BMR is effective when the NO x/NMHC ratio is in the range of 0.04-0.15 with optimum ratio of around 0.07. Seasonal variations in NO x/NMHC ratios are consistent with the O 3 variations, i.e., optimum in summer (0.07), followed by winter (0.05), and the lowest in rainy season (0.03).

  5. Seawater Polluted with Highly Concentrated Polycyclic Aromatic Hydrocarbons Suppresses Osteoblastic Activity in the Scales of Goldfish, Carassius auratus.

    Science.gov (United States)

    Suzuki, Nobuo; Sato, Masayuki; Nassar, Hossam F; Abdel-Gawad, Fagr Kh; Bassem, Samah M; Yachiguchi, Koji; Tabuchi, Yoshiaki; Endo, Masato; Sekiguchi, Toshio; Urata, Makoto; Hattori, Atsuhiko; Mishima, Hiroyuki; Shimasaki, Youhei; Oshima, Yuji; Hong, Chun-Sang; Makino, Fumiya; Tang, Ning; Toriba, Akira; Hayakawa, Kazuichi

    2016-08-01

    We have developed an original in vitro bioassay using teleost scale, that has osteoclasts, osteoblasts, and bone matrix as each marker: alkaline phosphatase (ALP) for osteoblasts and tartrate-resistant acid phosphatase (TRAP) for osteoclasts. Using this scale in vitro bioassay, we examined the effects of seawater polluted with highly concentrated polycyclic aromatic hydrocarbons (PAHs) and nitro-polycyclic aromatic hydrocarbons (NPAHs) on osteoblastic and osteoclastic activities in the present study. Polluted seawater was collected from two sites (the Alexandria site on the Mediterranean Sea and the Suez Canal site on the Red Sea). Total levels of PAHs in the seawater from the Alexandria and Suez Canal sites were 1364.59 and 992.56 ng/l, respectively. We were able to detect NPAHs in both seawater samples. Total levels of NPAHs were detected in the seawater of the Alexandria site (12.749 ng/l) and the Suez Canal site (3.914 ng/l). Each sample of polluted seawater was added to culture medium at dilution rates of 50, 100, and 500, and incubated with the goldfish scales for 6 hrs. Thereafter, ALP and TRAP activities were measured. ALP activity was significantly suppressed by both polluted seawater samples diluted at least 500 times, but TRAP activity did not change. In addition, mRNA expressions of osteoblastic markers (ALP, osteocalcin, and the receptor activator of the NF-κB ligand) decreased significantly, as did the ALP enzyme activity. In fact, ALP activity decreased on treatment with PAHs and NPAHs. We conclude that seawater polluted with highly concentrated PAHs and NPAHs influences bone metabolism in teleosts.

  6. Assessment of Heavy Metals Concentrations in the Surface Water of ...

    African Journals Online (AJOL)

    The digested samples were analyzed for Fe, Cr, Cu, Zn and Pb using Atomic Absorption Spectrophotometer (Model IL250). The seasonal sequence of heavy metals concentrations showed Zn>Fe>Cr>Cu>Pb and Fe>Zn>Cr>Cu>Pb in dry and wet seasons respectively, while that of annual was Cr>Fe>Zn>Cu>Pb. The results ...

  7. Trapped surfaces due to concentration of gravitational radiation

    International Nuclear Information System (INIS)

    Beig, R.; O Murchadha, N.

    1991-01-01

    Sequences of global, asympotically flat solutions to the time-symmetric initial value constraints of general relativity in vacuo are constructed which develop outer trapped surfaces for large values of the argument. Thus all such configurations must gravitationally collapse. A new proof of the positivity of mass in the strong-field regime is also found. (Authors) 22 refs

  8. Equilibrium sampling of environmental pollutants in fish: comparison with lipid-normalized concentrations and homogenization effects on chemical activity.

    Science.gov (United States)

    Jahnke, Annika; Mayer, Philipp; Adolfsson-Erici, Margaretha; McLachlan, Michael S

    2011-07-01

    Equilibrium sampling of organic pollutants into the silicone polydimethylsiloxane (PDMS) has recently been applied in biological tissues including fish. Pollutant concentrations in PDMS can then be multiplied with lipid/PDMS distribution coefficients (D(Lipid,PDMS) ) to obtain concentrations in fish lipids. In the present study, PDMS thin films were used for equilibrium sampling of polychlorinated biphenyls (PCBs) in intact tissue of two eels and one salmon. A classical exhaustive extraction technique to determine lipid-normalized PCB concentrations, which assigns the body burden of the chemical to the lipid fraction of the fish, was additionally applied. Lipid-based PCB concentrations obtained by equilibrium sampling were 85 to 106% (Norwegian Atlantic salmon), 108 to 128% (Baltic Sea eel), and 51 to 83% (Finnish lake eel) of those determined using total extraction. This supports the validity of the equilibrium sampling technique, while at the same time confirming that the fugacity capacity of these lipid-rich tissues for PCBs was dominated by the lipid fraction. Equilibrium sampling was also applied to homogenates of the same fish tissues. The PCB concentrations in the PDMS were 1.2 to 2.0 times higher in the homogenates (statistically significant in 18 of 21 cases, p equilibrium sampling and partition coefficients determined using tissue homogenates. Copyright © 2011 SETAC.

  9. Forecasting the effects of EU policy measures on the nitrate pollution of groundwater and surface waters

    Science.gov (United States)

    Kunkel, R.; Kreins, P.; Tetzlaff, B.; Wendland, F.

    2009-04-01

    The fundamental objectives of the European Union-Water Framework Directive and the EU Groundwater Directive are to attain a good status of water and groundwater resources in the member states of the EU by 2015. Following the implementation time table, the EU member States carried out a review about the qualitative and quantitative status for all river basins in the EU. For river basins, whose good status cannot be guaranteed by 2015, catchment wide operational plans and measurement programs are to be drafted and implemented until 2009. In the river basin district Weser, Germany, which comprises a catchment area of ca. 49.000 km2, the achievement of the good status is unclear, or rather unlikely for 63% of the groundwater bodies. Inputs from diffuse sources and most of all nitrogen losses from agriculturally used land have been identified as the main reasons for exceeding the groundwater threshold value for nitrate (50 mg/l) and for failing the „good qualitative status" of groundwater in 2015. For this reason the drafting and implementation of measurement programs in the Weser basin are primarily focused on nitrate. The achievement of good qualitative status of groundwater bodies entails a particular challenge especially for large river basins as the complex ecological, hydrological, hydrogeological and agro-economic relationships have to be considered simultaneously. Integrated large scale agroeconomic- hydrologic models are powerful tools to analyze the actual pollution loads and "hot spot" areas and to predict the temporal and spatial effects of reduction measures. We used the interdisciplinary model network REGFLUD to predict the nitrogen intakes into groundwater and the nitrogen losses to surface waters by different pathways at the regional scale using an area differentiated approach. The model system combines the agro-economic model RAUMIS for estimating nitrogen surpluses from agriculture and the hydrological models GROWA/DENUZ/WEKU for describing the

  10. Dependence of indoor-pollutant concentrations on sources, ventilation rates, and other removal factors

    International Nuclear Information System (INIS)

    Nero, A.V. Jr.; Grimsrud, D.T.

    1983-01-01

    The behavior of several classes of chemical and physical pollutants include emissions from combustion appliances, radon and its progeny, formaldehyde, and other organic compounds. Current research at Lawrence Berkeley Laboratory is described and research needs in the area of indoor air quality is pointed out

  11. Measuring concentrations of selected air pollutants inside California vehicles : final report

    Science.gov (United States)

    1998-12-01

    This study provided the data needed to characterize in-transit exposures to air pollutants for California drivers. It also demonstrated a number of in-situ monitoring techniques in moving vehicles and provided findings that shed new light on particle...

  12. Background Concentrations for Use in the Operational Street Pollution Model (OSPM)

    DEFF Research Database (Denmark)

    Jensen, S. S.

    A background model has been developed for application in the Operational Street Pollution Model (OSPM) in context of long-term exposure modelling. The back ground model is based on a semi-empirical method founded on a few monitor stations that estimates standardised one hour time-series of urban...

  13. Air pollution assessment based on elemental concentration of leaves tissue and foliage dust along an urbanization gradient in Vienna.

    Science.gov (United States)

    Simon, Edina; Braun, Mihály; Vidic, Andreas; Bogyó, Dávid; Fábián, István; Tóthmérész, Béla

    2011-05-01

    Foliage dust contains heavy metal that may have harmful effects on human health. The elemental contents of tree leaves and foliage dust are especially useful to assess air environmental pollution. We studied the elemental concentrations in foliage dust and leaves of Acer pseudoplatanus along an urbanization gradient in Vienna, Austria. Samples were collected from urban, suburban and rural areas. We analysed 19 elements in both kind of samples: aluminium, barium, calcium, copper, iron, potassium, magnesium, sodium, phosphor, sulphur, strontium and zinc. We found that the elemental concentrations of foliage dust were significantly higher in the urban area than in the rural area for aluminium, barium, iron, lead, phosphor and selenium. Elemental concentrations of leaves were significantly higher in urban than in rural area for manganese and strontium. Urbanization changed significantly the elemental concentrations of foliage dust and leaves and the applied method can be useful for monitoring the environmental load. Copyright © 2011 Elsevier Ltd. All rights reserved.

  14. Response of epiphytic lichen communities to decreasing ammonia air concentrations in a moderately polluted area of The Netherlands

    International Nuclear Information System (INIS)

    Sparrius, Laurens B.

    2007-01-01

    Decreasing local ammonia air concentrations in a moderately polluted area in The Netherlands were accompanied by a rapid increase in nitrogen-sensitive species (acidophytes) and a decline of nitrogen-tolerant macrolichens (nitrophytes). This paper presents data on the relationship between nitrophyte abundance and species abundance for three ecological groups of epiphytic lichens: nitrophytes (positively correlated with ammonia), acidophytes (negatively correlated) and neutrophytes (which have an optimum at medium concentrations) and suggests ammonia dependent optimum curves for these groups. In this study neutrophytes were found to die-off massively at sites with a decrease of the ammonia air concentration over the period 1996-2003. - Lichens can be used to detect both increasing and decreasing ammonia air concentrations

  15. Response of epiphytic lichen communities to decreasing ammonia air concentrations in a moderately polluted area of The Netherlands

    Energy Technology Data Exchange (ETDEWEB)

    Sparrius, Laurens B. [BIO DIV, Vrijheidslaan 27, NL-2806 KE Gouda (Netherlands)]. E-mail: sparrius@biodiv.nl

    2007-03-15

    Decreasing local ammonia air concentrations in a moderately polluted area in The Netherlands were accompanied by a rapid increase in nitrogen-sensitive species (acidophytes) and a decline of nitrogen-tolerant macrolichens (nitrophytes). This paper presents data on the relationship between nitrophyte abundance and species abundance for three ecological groups of epiphytic lichens: nitrophytes (positively correlated with ammonia), acidophytes (negatively correlated) and neutrophytes (which have an optimum at medium concentrations) and suggests ammonia dependent optimum curves for these groups. In this study neutrophytes were found to die-off massively at sites with a decrease of the ammonia air concentration over the period 1996-2003. - Lichens can be used to detect both increasing and decreasing ammonia air concentrations.

  16. Concentration distributions of thoron and radon near the ground surface

    Energy Technology Data Exchange (ETDEWEB)

    Katase, Akira [Tohwa Univ., Fukuoka (Japan). Faculty of Engineering

    1996-12-01

    One dimensional diffusion model with a constant diffusion coefficient is applied to the thoron concentration distributions in air above the ground. The experimental distributions are well described by the exponential function obtained from the model. Diffusion coefficients and thoron exhalation rates are estimated from the measured distributions, which are the average values for three months. The present values of thoron exhalation are however several times as small as those measured by other researchers. (author)

  17. Combining tree-ring metal concentrations and lead, carbon and oxygen isotopes to reconstruct peri-urban atmospheric pollution

    Directory of Open Access Journals (Sweden)

    Annick Doucet

    2012-08-01

    Full Text Available In this study, we analysed the tree-ring metal concentrations and isotope ratios of five stands located in three contrasted settings to infer the diffuse air pollution history of the northern part of the Windsor–Québec City Corridor in eastern Canada. Tree-ring series show that the Cd and Zn accumulation rates were higher between 1960 and 1986 and that the long-term acidification of the soil (Ca/Al series was likely induced by NOx and SOx deposition (δ15N and δ13C trends as proxy. The Pb concentrations and 206Pb/207Pb ratios indicate that the dominant source of lead from 1880 to the 1920s was the combustion of north-eastern American coal, which was succeeded by the combustion of leaded gasoline from the 1920s to the end of the 1980s. Our modelling approach allows separating the climatic and anthropogenic effects on the tree-ring δ13C and δ18O responses. Diffuse air pollution caused an enrichment in 13C in all stands and a decrease of the δ18O values only in three of the stands. This study indicates that dendrogeochemistry can show contrasted responses to environmental changes and that the combination of several independent indicators constitutes a powerful tool to reconstruct the air pollution history in the complex context of peri-urban regions.

  18. The efficacy of surface active substances to decontaminate radioactive pollution of animals

    International Nuclear Information System (INIS)

    Kossakowski, S.

    1975-01-01

    The purpose of the work was to determine the efficacy of native surface-active substances in the decontamination of pig pollution with 90 Sr, 131 J, 144 Ce and 137 Cs. The appraisal was performed on the basis of indices of final activity. It was found that an Ixi solution was the most efficient against 137 Cs, E powder and Kokosal against 144 Ce and 90 Sr respectively, and also E powder against 137 J. The most universal proved to be enzymatic powders E and R, and then the detergens Ixi, Bis, FF and Kokosal. (author)

  19. Snow cover as a source of technogenic pollution of surface water during the snow melting period

    Directory of Open Access Journals (Sweden)

    Labuzova Olga

    2016-10-01

    Full Text Available The study of pollutants in melt water of snow cover and snow disposal sites in the city of Barnaul showed that during the snow melting period the surface water is not subjected to significant technogenic impact according to a number of studied indices. The oils content is an exception: it can exceed MAC more than 20 times in river- water due to the melting of city disposal sites. Environmental damage due to an oils input into water resources during the snow melting period can be more than 300000 thousand rubles.

  20. Isopleths of surface air concentration and surface air kerma rate due to a radioactive cloud released from a stack (3)

    International Nuclear Information System (INIS)

    Tachibana, Haruo; Kikuchi, Masamitsu; Sekita, Tsutomu; Yamaguchi, Takenori

    2004-06-01

    This report is a revised edition of 'Isopleths of Surface Air Concentration and Surface Air Absorbed Dose Rate due to a Radioactive Cloud Released from a Stack(II) '(JAERI-M 90-206) and based on the revised Nuclear Safety Guidelines reflected the ICRP1990 Recommendation. Characteristics of this report are the use of Air Karma Rate (Gy/h) instead of Air Absorbed Dose Rate (Gy/h), and the record of isopleths of surface air concentration and surface air karma rate on CD-ROM. These recorded data on CD-ROM can be printed out on paper and/or pasted on digital map by personal computer. (author)

  1. Multi-pollutant surface objective analyses and mapping of air quality health index over North America.

    Science.gov (United States)

    Robichaud, Alain; Ménard, Richard; Zaïtseva, Yulia; Anselmo, David

    2016-01-01

    Air quality, like weather, can affect everyone, but responses differ depending on the sensitivity and health condition of a given individual. To help protect exposed populations, many countries have put in place real-time air quality nowcasting and forecasting capabilities. We present in this paper an optimal combination of air quality measurements and model outputs and show that it leads to significant improvements in the spatial representativeness of air quality. The product is referred to as multi-pollutant surface objective analyses (MPSOAs). Moreover, based on MPSOA, a geographical mapping of the Canadian Air Quality Health Index (AQHI) is also presented which provides users (policy makers, public, air quality forecasters, and epidemiologists) with a more accurate picture of the health risk anytime and anywhere in Canada and the USA. Since pollutants can also behave as passive atmospheric tracers, they provide information about transport and dispersion and, hence, reveal synoptic and regional meteorological phenomena. MPSOA could also be used to build air pollution climatology, compute local and national trends in air quality, and detect systematic biases in numerical air quality (AQ) models. Finally, initializing AQ models at regular time intervals with MPSOA can produce more accurate air quality forecasts. It is for these reasons that the Canadian Meteorological Centre (CMC) in collaboration with the Air Quality Research Division (AQRD) of Environment Canada has recently implemented MPSOA in their daily operations.

  2. Analysis of Surface Water Pollution in the Kinta River Using Multivariate Technique

    International Nuclear Information System (INIS)

    Hamza Ahmad Isiyaka; Hafizan Juahir

    2015-01-01

    This study aims to investigate the spatial variation in the characteristics of water quality monitoring sites, identify the most significant parameters and the major possible sources of pollution, and apportion the source category in the Kinta River. 31 parameters collected from eight monitoring sites for eight years (2006-2013) were employed. The eight monitoring stations were spatially grouped into three independent clusters in a dendrogram. A drastic reduction in the number of monitored parameters from 31 to eight and nine significant parameters (P<0.05) was achieved using the forward stepwise and backward stepwise discriminate analysis (DA). Principal component analysis (PCA) accounted for more than 76 % in the total variance and attributes the source of pollution to anthropogenic and natural processes. The source apportionment using a combined multiple linear regression and principal component scores indicates that 41 % of the total pollution load is from rock weathering and untreated waste water, 26 % from waste discharge, 24 % from surface runoff and 7 % from faecal waste. This study proposes a reduction in the number of monitoring stations and parameters for a cost effective and time management in the monitoring processes and multivariate technique can provide a simple representation of complex and dynamic water quality characteristics. (author)

  3. Heavy metals pollution status in surface sediments (rivers and artifical lakes, Serbia)

    Science.gov (United States)

    Sakan, Sanja; Đorđević, Dragana

    2017-04-01

    Potentially hazardous trace elements, often in literature referred as "heavy metals", are deemed serious pollutants due to their toxicity, persistence and non-degradability in the environment. These elements play an important role in extent of water pollution and threaten the health of populations and ecosystems. As the sink of heavy metals, sediment beds adsorb metals in quantities that are many times higher than those found in the water column in the long-term polluted water environment. It is believed that most of the metal content, as much as 90% in aquatic sediments is bound to sediments. Metal contamination in these sediments could be directly affect the river water quality, resulting in potential consequences to the sensitive lowest levels of the food chain and ultimately to human health. The objective of this research was the evaluation of heavy metal contamination level in sediments of the most important rivers and artificial lakes in Serbia. The heavy metal enrichment in studied sediments was conducted by using: determination of total metal content, sequential extraction procedure for the fractionation of studied elements, quantification of the metal enrichment degree in the sediments by calculating geo-accumulation indices, determination of actual and potential element availability and application of BRAI index for the assessment of heavy metal bioavailability. The sediments were found to be contaminated by heavy metals to various extents, mostly with Cd, Cu, and Zn. The significant variation in heavy metal distribution among samples collected in this large region, encompassing all Serbian watersheds, suggests the selective contamination of sediments by heavy metals. Elevated concentrations of elements in most cases were detected in samples of river sediments, since artificial lake reservoirs are usually built in rural areas, where the less anthropogenic pollution. Rivers often flow through the towns and these water basins less or more loaded

  4. Effects of age, sex and reproductive status on persistent organic pollutant concentrations in "Southern Resident" killer whales.

    Science.gov (United States)

    Krahn, Margaret M; Hanson, M Bradley; Schorr, Gregory S; Emmons, Candice K; Burrows, Douglas G; Bolton, Jennie L; Baird, Robin W; Ylitalo, Gina M

    2009-10-01

    "Southern Resident" killer whales (Orcinus orca) that comprise three fish-eating "pods" (J, K and L) were listed as "endangered" in the US and Canada following a 20% population decline between 1996 and 2001. Blubber biopsy samples from Southern Resident juveniles had statistically higher concentrations of certain persistent organic pollutants than were found for adults. Most Southern Resident killer whales, including the four juveniles, exceeded the health-effects threshold for total PCBs in marine mammal blubber. Maternal transfer of contaminants to the juveniles during rapid development of their biological systems may put these young whales at greater risk than adults for adverse health effects (e.g., immune and endocrine system dysfunction). Pollutant ratios and field observations established that two of the pods (K- and L-pod) travel to California to forage. Nitrogen stable isotope values, supported by field observations, indicated possible changes in the diet of L-pod over the last decade.

  5. A joint prevention and control mechanism for air pollution in the Beijing-Tianjin-Hebei region in china based on long-term and massive data mining of pollutant concentration

    Science.gov (United States)

    Wang, Hongbo; Zhao, Laijun

    2018-02-01

    China's Beijing-Tianjin-Hebei (BTH) region suffers from the country's worst air pollution. The problem has caused widespread concern both at home and abroad. Based on long-term and massive data mining of PM2.5 and PM10 concentration, we found that these pollutants showed similar variations in four seasons, but the most severe pollution was in winter. Through cluster analysis of the winter daily average concentration (DAC) of the two pollutants, we defined regions with similar variations in pollutant concentrations in winter. For the most polluted cities in BTH, the relationship between correlation coefficients for winter DAC and the distance between cities revealed that PM2.5 has regional, large-scale characteristics, with concentrated outbreaks, whereas PM10 has local, small-scale characteristics, with outbreaks at multiple locations. By selecting the key cities with the strongest linear relationship between the pollutant's DAC of each city and the daily individual air quality index values of the BTH region and through cluster analysis on the correlations between the pollutant DACs of the key cities, we defined regional divisions suitable for Joint Prevention and Control of Atmospheric Pollution (JPCAP) program to control PM2.5 and PM10. Comprehensively considering the degree of influence of regional atmospheric pollution control (RAPC) on air quality in BTH, as well as the elasticity and urgency of RAPC, we defined the control grades of the JPCAP regions. We found both the regions and corresponding control grades were consistent for PM2.5 and PM10. The thinking and methods of atmospheric pollution control we proposed will have broad significance for implementation of RAPC in other regions around the world.

  6. [Responses of rice growth and development to elevated near-surface layer ozone (O3) concentration: a review].

    Science.gov (United States)

    Yang, Lian-xin; Wang, Yu-long; Shi, Guang-yao; Wang, Yun-xia; Zhu, Jian-guo

    2008-04-01

    Ozone (O3) is recognized as one of the most important air pollutants. At present, the worldwide average tropospheric O3 concentration has been increased from an estimated pre-industrial level of 38 nl L(-1) (25-45 nl L(-1), 8-h summer seasonal average) to approximately 50 nl L(-1) in 2000, and to 80 nl L(-1) by 2100 based on most pessimistic projections. Oryza sativa L. (rice) is the most important grain crop in the world, and thus, to correctly evaluate how the elevated near-surface layer O3 concentration will affect the growth and development of rice is of great significance. This paper reviewed the chamber (including closed and open top chamber)-based studies about the effects of atmospheric ozone enrichment on the rice visible injury symptoms, photosynthesis, water relationship, phenology, dry matter production and allocation, leaf membrane protective system, and grain yield and its components. Further research directions in this field were discussed.

  7. Program for estimating surface air concentrations of NPP discharge radionuclides

    International Nuclear Information System (INIS)

    Ivanov, E.A.; Ramzina, T.V.; Sokolova, E.Yu.

    1986-01-01

    Methods for calculating short-term values of ground-level specific activity in the NPP region and the values averaged for an extended period are described. These methods are realized in the LAURA program on the FORTRAN 4 language for the ES-1033 computer with the OS ES translator and the EMQ-666 computer. As a result of program execution, the user receives the following information: 1) the table for radionuclide surface specific activity values depending on the direction and distance from the source; the wind rose matrix and conditional probabilities of the atmosphere stability category; 2) the map of isolines of radionuclide specific activity in a grid given in polar coordinates with marks of level lines according to their values

  8. Concentrations and (delta)13C values of atmospheric CO2 from oceanic atmosphere through time: polluted and non-polluted areas

    International Nuclear Information System (INIS)

    Longinelli, Antonio; Selmo, Enrico; Lenaz, Renzo; Ori, Carlo

    2005-01-01

    CO 2 is one of the primary agents of global climate changes. The increase of atmospheric CO 2 concentration is essentially related to human-induced emissions and, particularly, to the burning of fossil fuel whose (delta) 13 C values are quite negative. Consequently, an increase of the CO 2 concentration in the atmosphere should be paralleled by a decrease of its (delta) 13 C. Continuous and/or spot measurements of CO 2 concentrations were repeatedly carried out during the last decade and in the same period of the year along hemispheric courses from Italy to Antarctica on a vessel of the Italian National Research Program in Antarctica. During these expeditions, discrete air samples were also collected in 4-l Pyrex flasks in order to carry out precise carbon isotope analyses on atmospheric CO 2 from different areas, including theoretically 'clean' open ocean areas, with the main purpose of comparing these open ocean results with the results obtained by the National Oceanic and Atmospheric Administration/World Meteorological Organization (NOAA/WMO) at land-based stations. According to the data obtained for these two variables, a relatively large atmospheric pollution is apparent in the Mediterranean area where the CO 2 concentration has reached the value of 384 ppmv while quite negative (delta) 13 C values have been measured only occasionally. In this area, southerly winds probably help to reduce the effect of atmospheric pollution even though, despite a large variability of CO 2 concentrations, these values are consistently higher than those measured in open ocean areas by a few ppmv to about 10 ppmv. A marked, though non-continuous, pollution is apparent in the area of the Bab-el-Mandeb strait where (delta) 13 C values considerably more negative than in the Central and Southern Red Sea were measured. The concentration of atmospheric CO 2 over the Central Indian Ocean increased from about 361 ppmv at the end of 1996 to about 373 ppmv at the end of 2003 (mean growth

  9. TOF-SIMS measurements for toxic air pollutants adsorbed on the surface of airborne particles

    Science.gov (United States)

    Tomiyasu, Bunbunoshin; Hoshi, Takahiro; Owari, Masanori; Nihei, Yoshimasa

    2003-01-01

    Three kinds of particulate matter were collected: diesel and gasoline exhaust particles emitted directly from exhaust nozzle, and suspended particulate matter (SPM) near the traffic route. Soxhlet extraction was performed on each sample. By gas-chromatograph-mass spectrometer (GC-MS) analysis of these extracts, di-ethyl phthalate and di- n-butyl phthalate were detected from the extract of SPM and diesel exhaust particles (DEPs). Because these phthalates were sometimes suspected as contamination, time-of-flight secondary ion mass spectrometry (TOF-SIMS) measurements were also performed on the samples collected at the same environment. By comparing obtained spectra, it is clear that these environmental endocrine disrupters (EEDs) were adsorbed on DEP surface. Thus, we concluded that the combination of conventional method and TOF-SIMS measurement is one of the most powerful techniques for analyzing the toxic air pollutants adsorbed on SPM surface.

  10. Sources identification and pollution evaluation of heavy metals in the surface sediments of Bortala River, Northwest China.

    Science.gov (United States)

    Zhang, Zhaoyong; Juying, Li; Mamat, Zulpiya; QingFu, Ye

    2016-04-01

    The current study focused on the Bortala River - a typical inland river located in an oasis of arid area in northwestern China. The sediment and soil samples were collected from the river and drainage basin. Results showed that: (1) the particle size of the sand fraction of the sediments was 78-697 µm, accounting for 78.82% of the total samples; the average concentrations of eight heavy metals fell within the concentration ranges recommended by the Secondary National Standard of China, while the maximum concentrations of Pb, Cd, and Hg exceeded these standards; (2) results from multivariate statistical analysis indicated that Cu, Ni, As, and Zn originated primarily from natural geological background, while Cd, Pb, Hg and Cr in the sediments originated from human activities; (3) results of the enrichment factor analysis and the geo-accumulation index evaluation showed that Cd, Hg, and Pb were present in the surface sediments of the river at low or partial serious pollution levels, while Zn, Cr, As, Ni, and Cu existed at zero or low pollution levels; (4) calculation of the potential ecological hazards index showed that among the eight tested heavy metals, Cd, Pb, Hg, and Cr were the main potential ecological risk factors, with relative contributions of 25.43%, 22.23%, 21.16%, and 14.87%, respectively; (5) the spatial distribution of the enrichment factors (EF(S)), the Geo-accumulation index (I(geo)), and the potential ecological risk coefficient (E(r)(i)) for eight heavy metals showed that there was a greater accumulation of heavy metals Pb, Cd, and Hg in the sediments of the central and eastern parts of the river. Results of this research can be a reference for the heavy metals pollution prevention, the harmony development of the ecology protection and the economy development of the oases of inland river basin of arid regions of China, Central Asia and also other parts of the world. Copyright © 2015 Elsevier Inc. All rights reserved.

  11. Irradiation induced surface segregation in concentrated alloys: a contribution

    International Nuclear Information System (INIS)

    Grandjean, Y.

    1996-01-01

    A new computer modelization of irradiation induced surface segregation is presented together with some experimental determinations in binary and ternary alloys. The model we propose handles the alloy thermodynamics and kinetics at the same level of sophistication. Diffusion is described at the atomistic level and proceeds vis the jumps of point defects (vacancies, dumb-bell interstitials): the various jump frequencies depend on the local composition in a manner consistent with the thermodynamics of the alloy. For application to specific alloys, we have chosen the simplest statistical approximation: pair interactions in the Bragg Williams approximation. For a system which exhibits the thermodynamics and kinetics features of Ni-Cu alloys, the model generates the behaviour parameters (flux and temperature) and of alloy composition. Quantitative agreement with the published experimental results (two compositions, three temperatures) is obtained with a single set of parameters. Modelling austenitic steels used in nuclear industry requires taking into account the contribution of dumbbells to mass transport. The effects of this latter contribution are studied on a model of Ni-Fe. Interstitial trapping on dilute impurities is shown to delay or even suppress the irradiation induced segregation. Such an effect is indeed observed in the experiments we report on Fe 50 Ni 50 and Fe 49 Ni 50 Hf 1 alloys. (author)

  12. Potential impacts of aquatic pollutants: Sub-clinical antibiotic concentrations induce genome changes and promote antibiotic resistance

    Directory of Open Access Journals (Sweden)

    Louise eChow

    2015-08-01

    Full Text Available Antibiotics are disseminated into aquatic environments via human waste streams and agricultural run-off. Here they can persist at low, but biologically relevant, concentrations. Antibiotic pollution establishes a selection gradient for resistance and may also raise the frequency of events that generate resistance: point mutations; recombination; and lateral gene transfer. This study examined the response of bacteria to sub-inhibitory levels of antibiotics. Pseudomonas aeruginosa and Pseudomonas protegens were exposed kanamycin, tetracycline or ciprofloxacin at 1/10 the minimal inhibitory concentration (MIC in a serial streaking experiment over 40 passages. Significant changes in rep-PCR fingerprints were noted in both species when exposed to sub-inhibitory antibiotic concentrations. These changes were observed in as few as five passages, despite the fact that the protocols used sample less than 0.3% of the genome, in turn suggesting much more widespread alterations to sequence and genome architecture. Experimental lines also displayed variant colony morphologies. The final MICs were significantly higher in some experimental lineages of Ps. protegens, suggesting that 1/10 the MIC induces de-novo mutation events that generate resistance phenotypes. The implications of these results are clear: exposure of the environmental microbiome to antibiotic pollution will induce similar changes, including generating newly resistant species that may be of

  13. [SR-XRF analysis of characteristics of heavy element concentration in qingdao algae and application to monitoring oceanic pollution].

    Science.gov (United States)

    Kang, Shi-xiu; Shen, Xian-sheng; Huang, Yu-ying; Ju, Xin; Wu, Zi-qin

    2003-02-01

    Quantitative and qualitative analysis of the heavy element concentration characteristics of 14 specimens of 9 kinds of Qingdao algae by synchrotron radiation X-ray fluorescence (SR-XRF) are presented. Results show that various algae are quite different in element concentration. Some algae reveal super concentration ability, such as Sargassum pallidum for As and Sr, Symphyocladia latiuscula for Br and Laminaria japonica for I. Changes in the ratio of peak intensities of Mn and Fe in XRF spectrum reflect on the antagonism between elements in algae, relatively to the environment pollution. The minimum detection limit (MDL) of standard specimen, Antarctic mosses, was measured. Quantitative analysis and comparison of 10 specimens of 5 kind algae gathered from the same zone of Qingdao near-sea in 1985 and in 1999 were done. The contents of Mn, Fe, Zn, As, Br and Pb increased in 1999, in which, As in Sargassum pallidum increased 155% and Pb in Codium fragil increased 120%. The results indicated that the pollution in the near-sea of Qingdao is currently tending toward severity.

  14. Pollution influence on bacterial abundance and chlorophyll-a concentration: case study at Idku Lagoon, Egypt

    Directory of Open Access Journals (Sweden)

    E. Siam

    2000-03-01

    Full Text Available Idku lagoon is one of the northern delta lakes, connected with the Mediterranean Sea through Boughaz El Maadyah. It is subjected to industrial, domestic and agricultural pollution. Depending on collected data of water samples during one year of research, the lagoon was separated into different water masses by using the discriminant function analysis (DFA. Estimation of some biological (total and saprophytic bacteria, faecal bacteria and chlorophyll-a and chemical variables (chlorosity, organic matter, dissolved oxygen and dissolved inorganic nutrients lead to differentiate Idku lagoon waters into four sites: Drain (I, Lake Proper (II, Bay (III and Boughaz (IV. The highly effective parameters for the predicted sites were chlorosity, organic matter and faecal bacteria (E. coli. Factor analysis was applied for each site to find out the correlating variables (biological and chemical that seemed to control each independent site. At Drain site (I pollution by agricultural sewage (through Idku Drain supported bacterial as well as algal growth, while at Lake Proper site (II bacteria seemed to obtain their nutrient supply from algal origin after their death and lysis. Site II was characterized by its absolute highest chlorophyll-a content. Factor models for sites II and III indicated a positive and mutual relationship between bacterial microbiota and chlorophyll-a. The strong correlation that appeared between all biota from factor model for site III, at the absolutely high chlorosity values (compared to the other sites, could be due to the development of salt tolerant strains and species. Factor model for site IV revealed a strong positive correlation between bacterial microbiota and nutrients (derived from industrial pollution at Boughaz El Maadyah, but negatively correlated to chlorophyll-a. Thus it seemed that bacteria obtained their nutrient supply mostly from sewage.

  15. Reduced gene expression levels after chronic exposure to high concentrations of air pollutants

    Czech Academy of Sciences Publication Activity Database

    Rössner ml., Pavel; Tulupová, Elena; Rössnerová, Andrea; Líbalová, Helena; Hoňková, Kateřina; Gmuender, H.; Pastorková, Anna; Švecová, Vlasta; Topinka, Jan; Šrám, Radim

    2015-01-01

    Roč. 780, oct (2015), s. 60-70 ISSN 0027-5107 R&D Projects: GA MŽP(CZ) SP/1B3/8/08; GA MŠk(CZ) LO1508; GA ČR GA13-13458S; GA MŠk 2B08005 Institutional support: RVO:68378041 Keywords : chronic exposure * air pollution * gene expression profiles * human health * particulate matter * polycyclic aromatic hydrocarbons Subject RIV: DN - Health Impact of the Environment Quality Impact factor: 2.581, year: 2015

  16. Model and real pollutant dispersion: concentration studies by conventional analytics and by laser spectrometry

    Czech Academy of Sciences Publication Activity Database

    Zelinger, Zdeněk; Střižík, Michal; Kubát, Pavel; Lang, Kamil; Bezpalcová, Klára; Jaňour, Zbyněk

    2006-01-01

    Roč. 86, č. 12 (2006), s. 889-903 ISSN 0306-7319 R&D Projects: GA MŠk OC 723.001; GA MŠk OC 723.002; GA MŠk 1P05ME766; GA AV ČR 1ET400400410 Institutional research plan: CEZ:AV0Z40400503; CEZ:AV0Z20760514; CEZ:AV0Z40320502 Keywords : air pollution * photoacoustic spectrometry * wind tunel * diffrential absorption LIDAR Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 0.917, year: 2006

  17. Fecal pollution source tracking toolbox for identification, evaluation and characterization of fecal contamination in receiving urban surface waters and groundwater.

    Science.gov (United States)

    Tran, Ngoc Han; Gin, Karina Yew-Hoong; Ngo, Huu Hao

    2015-12-15

    The quality of surface waters/groundwater of a geographical region can be affected by anthropogenic activities, land use patterns and fecal pollution sources from humans and animals. Therefore, the development of an efficient fecal pollution source tracking toolbox for identifying the origin of the fecal pollution sources in surface waters/groundwater is especially helpful for improving management efforts and remediation actions of water resources in a more cost-effective and efficient manner. This review summarizes the updated knowledge on the use of fecal pollution source tracking markers for detecting, evaluating and characterizing fecal pollution sources in receiving surface waters and groundwater. The suitability of using chemical markers (i.e. fecal sterols, fluorescent whitening agents, pharmaceuticals and personal care products, and artificial sweeteners) and/or microbial markers (e.g. F+RNA coliphages, enteric viruses, and host-specific anaerobic bacterial 16S rDNA genetic markers) for tracking fecal pollution sources in receiving water bodies is discussed. In addition, this review also provides a comprehensive approach, which is based on the detection ratios (DR), detection frequencies (DF), and fate of potential microbial and chemical markers. DR and DF are considered as the key criteria for selecting appropriate markers for identifying and evaluating the impacts of fecal contamination in surface waters/groundwater. Copyright © 2015 Elsevier B.V. All rights reserved.

  18. Trends in emissions and concentrations of air pollutants in the lower troposphere in the Baltimore/Washington airshed from 1997 to 2011

    Directory of Open Access Journals (Sweden)

    H. He

    2013-08-01

    Full Text Available Trends in the composition of the lower atmosphere (0–1500 m altitude and surface air quality over the Baltimore/Washington area and surrounding states were investigated for the period from 1997 to 2011. We examined emissions of ozone precursors from monitors and inventories as well as ambient ground-level and aircraft measurements to characterize trends in air pollution. The US EPA Continuous Emissions Monitoring System (CEMS program reported substantial decreases in emission of summertime nitrogen oxides (NOx from power plants, up to ∼80% in the mid-Atlantic States. These large reductions in emission of NOx are reflected in a sharp decrease of ground-level concentrations of NOx starting around 2003. The decreasing trend of tropospheric column CO observed by aircraft is ∼0.8 Dobson unit (DU per year, corresponding to ∼35 ppbv yr−1 in the lower troposphere (the surface to 1500 m above ground level. Satellite observations of long-term, near-surface CO show a ∼40% decrease over western Maryland between 2000 and 2011; the same magnitude is indicated by aircraft measurements above these regions upwind of the Baltimore/Washington airshed. With decreasing emissions of ozone precursors, the ground-level ozone in the Baltimore/Washington area shows a 0.6 ppbv yr−1 decrease in the past 15 yr. Since photochemical production of ozone is substantially influenced by ambient temperature, we introduce the climate penalty factor (CPF into the trend analysis of long-term aircraft measurements. After compensating for inter-annual variations in temperature, historical aircraft measurements indicate that the daily net production of tropospheric ozone over the Baltimore/Washington area decreased from ∼20 ppbv day−1 in the late 1990s to ∼7 ppbv day−1 in the early 2010s during ozone season. A decrease in the long-term column ozone is observed as ∼0.2 DU yr−1 in the lowest 1500 m, corresponding to an improvement of ∼1.3 ppbv yr−1. Our

  19. [Near surface CO2 concentration and its quantitative relationship with character of underlying surface in Shanghai City, China].

    Science.gov (United States)

    Pan, Chen; Zhu, Xi-yang; Jia, Wen-xiao; Yang, Fang; Liu, Ming; Xiang, Wei-ning

    2015-07-01

    Land use change and fossil fuel combustion due to urbanization have a significant effect on global carbon cycle and climate change. It's important to have an explicit understanding of the spatial distribution of CO2 to recognize and control GHG emission, which is helpful to reduce human-induced contribution to global climate change. The study area of this project was set in the city of Shanghai with intensive human activity and rapid urbanization. The monitoring of near surface CO2 concentration along 3 transects was conducted across an urban-rural gradient by means of near infrared gas analyzer Li-840A in spring, 2014. Remote sensing data were also used to derive underlying surface information. Further quantitative analysis of the mechanism of CO2 concentration's response to the characteristics of underlying surface was presented in this paper. The results showed that the average near surface CO2 concentration was (443.4±22.0) µmol . mol-1. CO2 concentration in city center was in average 12.5% (52.5 µLmol . mol-1) higher than that in the suburban area. Also, CO2 concentration showed a significant spatial differentiation, with the highest CO2 concentration in the northwest, the second highest in the southwest, and the lowest in the southeast, which was in accordance with the urbanization level of the underlying surface. The results revealed that the vegetation coverage rate (CVeg) was an important indicator to describe near surface CO2 concentration with a negative correlation, and the impervious surface area coverage rate (CISA) had lower explanatory power with a positive correlation. The study also found that the determination coefficient (R2) between CO2 concentration (CCO2) and CISA or CVeg achieved its highest value when the buffer distance was 5 km, and their quantitative relationships be described by a stepwise regression equation: CCO2=0.32CISA-0.89CVeg+445.13 (R2 =0.66, P<0.01).

  20. Development and Comparison of Air Pollution Exposure Surfaces Derived from On-Road Mobile Monitoring and Short-Term Stationary Sidewalk Measurements.

    Science.gov (United States)

    Minet, Laura; Liu, Rick; Valois, Marie-France; Xu, Junshi; Weichenthal, Scott; Hatzopoulou, Marianne

    2018-03-06

    Land-use regression (LUR) models of air pollutants are frequently developed on the basis of short-term stationary or mobile monitoring approaches, which raises the question of whether these two data collection protocols lead to similar exposure surfaces. In this study, we measured ultrafine particles (UFP) and black carbon (BC) concentrations in Toronto during summer 2016, using two short-term data collection approaches: mobile, involving 3023 road segments sampled on bicycles, and stationary, involving 92 sidewalk locations. We developed four LUR models and exposure surfaces, for the two pollutants and measurement protocols. Coefficients of determination ( R 2 ) varied from 0.434 to 0.525. Various small-scale traffic variables were included in the mobile LUR. Pearson correlation coefficients between the mobile and stationary surfaces were 0.23 for UFP and 0.49 for BC. We also compared the two surfaces using personal exposures from a panel study in Toronto conducted during the same period. The personal exposures differed from the outdoor exposures derived from the combination of GPS information and exposure surfaces. For UFP, the median for personal outdoor exposure was 26 344 part/cm 3 , while the cycling and stationary surfaces predicted medians of 31 201 and 19 057 part/cm 3 . Similar trends were observed for BC, with median exposures of 1764 (personal), 1799 (cycling), and 1469 ng/m 3 (stationary).

  1. The deconvolution of sputter-etching surface concentration measurements to determine impurity depth profiles

    International Nuclear Information System (INIS)

    Carter, G.; Katardjiev, I.V.; Nobes, M.J.

    1989-01-01

    The quasi-linear partial differential continuity equations that describe the evolution of the depth profiles and surface concentrations of marker atoms in kinematically equivalent systems undergoing sputtering, ion collection and atomic mixing are solved using the method of characteristics. It is shown how atomic mixing probabilities can be deduced from measurements of ion collection depth profiles with increasing ion fluence, and how this information can be used to predict surface concentration evolution. Even with this information, however, it is shown that it is not possible to deconvolute directly the surface concentration measurements to provide initial depth profiles, except when only ion collection and sputtering from the surface layer alone occur. It is demonstrated further that optimal recovery of initial concentration depth profiles could be ensured if the concentration-measuring analytical probe preferentially sampled depths near and at the maximum depth of bombardment-induced perturbations. (author)

  2. Influence of inundation of ground surface on 222Rn concentrations in shallow groundwater

    International Nuclear Information System (INIS)

    Hamada, Hiromasa; Abenney-Mickson, Stephen; Komae, Takami

    2004-01-01

    Radon-222 ( 222 Rn) is a good indicator for analyzing the speed at which surface water infiltrates the ground and reaches groundwater. Preferential flow, which is very fast, is expected to occur when the ground surface is inundated. Piston flow, which is very slow, is expected to occur when the ground surface is not inundated but is only sprinkled with water such as during a light rainfall. We hypothesized that preferential flow would reduce the 222 Rn concentration in groundwater but that piston flow would not; our study verified this hypothesis experimentally. We then measured 222 Rn concentration in groundwater for one year in low-land and upland locations. 222 Rn concentrations in groundwater decreased at the lowland site, where the ground surface was inundated by irrigation and heavy rainfall, while 222 Rn concentrations in groundwater did not decrease at the upland site, where the ground surface was not inundated. (author)

  3. Automatic control of pollutant on a shallow river using surface water systems: application to the Ebro River.

    Science.gov (United States)

    Puig, V; Romera, J; Quevedo, J; Sarrate, R; Morales-Hernandez, M; Gonzalez-Sanchis, M; Garcia-Navarro, P

    2014-01-01

    In this paper, the problem of automatic control of pollutant on a shallow river using surface water systems is addressed using a benchmark test case based in the Ebro River. The Ebro River presents flooding episodes in the city of Zaragoza in Spring when snow melts in the Pyrenees. To avoid flooding and high pollutant levels in living areas, some lands outside the city are prepared to be flooded. Going one step further, this paper is focused on the pollutant level control at a certain point downstream of the river under flooding episodes, and several control strategies for that purpose are presented and tested.

  4. Tracking Metal Pollution in Lake Chapala: Concentrations in Water, Sediments, and Fish.

    Science.gov (United States)

    Torres, Zaria; Mora, Miguel A; Taylor, Robert J; Alvarez-Bernal, Dioselina

    2016-09-01

    We measured concentrations of selected metals (Al, Ba, Cu, Mn, Hg, Sr, V, and Zn) in water, sediments, and fish from Lake Chapala and a reference site to evaluate potential negative effects on wildlife, particularly fish-eating birds. Fish metal concentrations ranged from 0.05 µg/g wet weight (ww) for Al and Cu to 64.70 µg/g ww for Sr. There was a positive and significant correlation between fish length and metals particularly for Ba, Cu, Mn, and Zn in Lake Chapala (p fish indicating no biomagnification through the food web. Overall, metal concentrations in water, sediments, and fish were similar to and in some cases below those reported for Lake Chapala over the last 20 years. Also, metal concentrations were below those that could be of concern for negative effects on fish and wildlife of Lake Chapala.

  5. Exposure to ambient concentrations of particulate air pollution does not influence vascular function or inflammatory pathways in young healthy individuals

    DEFF Research Database (Denmark)

    Bräuner, E. V.; Møller, P.; Barregård, L.

    2008-01-01

    artery tone following arm ischemia. Biomarkers included haemoglobin, red blood cells, platelet count, coagulation factors, C-reactive protein, fibrinogen, interleukin-6, tumour necrosis factor a, lag time to copper-induced oxidation of plasma lipids and protein oxidation measured as 2-aminoadipic...... semialdehyde in plasma. Results: No statistically significant differences were observed on microvascular function or the biomarkers after exposure to particle rich or particle filtered air. Conclusion: This study indicates that exposure to air pollution particles at outdoor concentrations is not associated...... on microvascular function and biomarkers related to inflammation, haemostasis and lipid and protein oxidation. Methods: Twenty-nine subjects participated in a randomized, two-factor crossover study with or without biking exercise for 180 minutes and with 24 hour exposure to particle rich (number concentrations, NC...

  6. An advanced analysis and modelling the air pollutant concentration temporal dynamics in atmosphere of the industrial cities: Odessa city

    Science.gov (United States)

    Buyadzhi, V. V.; Glushkov, A. V.; Khetselius, O. Yu; Ternovsky, V. B.; Serga, I. N.; Bykowszczenko, N.

    2017-10-01

    Results of analysis and modelling the air pollutant (dioxide of nitrogen) concentration temporal dynamics in atmosphere of the industrial city Odessa are presented for the first time and based on computing by nonlinear methods of the chaos and dynamical systems theories. A chaotic behaviour is discovered and investigated. To reconstruct the corresponding strange chaotic attractor, the time delay and embedding dimension are computed. The former is determined by the methods of autocorrelation function and average mutual information, and the latter is calculated by means of correlation dimension method and algorithm of false nearest neighbours. It is shown that low-dimensional chaos exists in the nitrogen dioxide concentration time series under investigation. Further, the Lyapunov’s exponents spectrum, Kaplan-Yorke dimension and Kolmogorov entropy are computed.

  7. Metal pollution assessment in the surface sediment of Lake Nasser, Egypt

    Directory of Open Access Journals (Sweden)

    Mohamed E. Goher

    2014-01-01

    Full Text Available Eight heavy metals were measured seasonally in the sediment of Lake Nasser during 2013. 27 sites were chosen through 9 sectors across the main channel of the lake from Abu-Simbel to Aswan High Dam to assess the levels of the selected metals. The abundance of these metals was in the order of Fe > Mn > Zn > Cr > Ni > Cu > Pb > Cd, with mean concentrations of 12.41 mg/g, 279.56, 35.38, 30.79, 27.56, 21.78, 11.21 and 0.183 μg/g, respectively. Heavy metals are positively correlated with fine particles (mud fractions and organic matter accumulation. The results showed perspicuous spatial high significant differences (P < 0.01 for all the measured metals. Fe, Cr, Ni, Pb and Cd exhibited temporally high significant differences (P < 0.01 before and after the flood period. Four Pollution Indices were used for the environmental assessment of Lake Nasser sediment. The indices included three single indices, Enrichment Factor (EF, Index of Geo-accumulation (Igeo and Contamination Factor (CF. While the fourth, Pollution Load Index (PLI was an integrated index. The pollution indexes confirmed that the Lake Nasser sediment was not contaminated with these elements. Sediments of Lake Nasser may be represented as a reference for the pre-industrial background of River Nile Sediments downstream Aswan High Dam.

  8. Airborne pollutant concentrations and health risks in selected Apulia region (IT) areas: preliminary results from the Jonico-Salentino project

    Science.gov (United States)

    Buccolieri, Riccardo; Genga, Alessandra; De Donno, Antonella; Siciliano, Tiziana; Siciliano, Maria; Serio, Francesca; Grassi, Tiziana; Rispoli, Gennaro; Cavaiola, Mattia; Lionello, Piero

    2017-04-01

    The Jonico-Salentino project (PJS) is a multidisciplinary study funded by Apulia Region (Det. N. 188_RU - 10/11/2015) aiming to assess health risk of people living in the cities of Lecce, Brindisi and Taranto. Citizens are exposed to emissions from industrial sources, biomass burning, vehicular, naval and air traffic, as well as from natural radioactive sources (radon). In this context, this work presents some preliminary results obtained by the Unit of University of Salento (Lecce) during an experimental campaign carried out in the study areas. The campaign is devoted to (i) sample particulate matter (PM), (ii) measure micro-meteorological variables and (iii) evaluate exposure levels of residents to main pollutants. Specifically, PM is sampled using a low volume sampler, while meteorological variables (wind speed components and direction temperature, relative humidity, precipitation and global solar radiation) are measured by advanced instrumentation such as ultrasonic anemometers which allows for the estimation of turbulence fluxes. The early effects of exposure to air pollutants is evaluated by the frequency of micronucleus (a biomarker of DNA damage) in exfoliated buccal cells collected using a soft-bristled toothbrush from oral mucosa of primary school children enrolled in the study. PM concentration data collected during the campaign are characterised from a chemical and morphological point of view; the analysis of different groups of particles allows identifying different natural and anthropogenic emission sources. This is done in conjunction to the investigation of the influence of local meteorology to elucidate the contribution of specific types of sources on final concentration levels. Finally, all data are used to assess the health risk of people living in the study areas as consequence of exposure to airborne pollutants.

  9. Influence of water pollution on the growth and pigment concentration of the microalgae Phaeodactylum tricornutum Bohlin (Bacillariophyta).

    Science.gov (United States)

    Zhuravel, Elena V; Markina, Zhanna V; Aizdaicher, Nina A

    2012-05-01

    The aim of the work was to study the influence of the water taken from one of the most polluted parts of the Peter the Great Bay (the Japan Sea), the Nakhodka Bay, on the growth and chlorophyll a concentration in the cells of microalga P. tricornutum Bohlin (Bacillariophyta). The estimation of the dynamics of cell number growth and chlorophyll a concentration in the cells of microalga grown in the water from the Nakhodka Bay was made. At the same time, in 2007-2008, the main hydrochemical parameters, such as water salinity, dissolved oxygen concentration, BOD(5), organic and mineral phosphates concentration, anionic surfactants, and total petroleum hydrocarbons, were determined. It is shown that in July 2007, when most hydrochemical parameters were lower than the maximum permissible level, the culture growth and chlorophyll a contents in the cells did not differ from the control for certain. In other seasons these indices differed greatly from the control. The positive correlation between the concentration of dissolved oxygen, phosphates, petroleum hydrocarbons, and the number of microalga cells, grown in the water from the Nakhodka Bay, was shown.

  10. Optimization of non-thermal plasma efficiency in the simultaneous elimination of benzene, toluene, ethyl-benzene, and xylene from polluted airstreams using response surface methodology.

    Science.gov (United States)

    Najafpoor, Ali Asghar; Jonidi Jafari, Ahmad; Hosseinzadeh, Ahmad; Khani Jazani, Reza; Bargozin, Hasan

    2018-01-01

    Treatment with a non-thermal plasma (NTP) is a new and effective technology applied recently for conversion of gases for air pollution control. This research was initiated to optimize the efficient application of the NTP process in benzene, toluene, ethyl-benzene, and xylene (BTEX) removal. The effects of four variables including temperature, initial BTEX concentration, voltage, and flow rate on the BTEX elimination efficiency were investigated using response surface methodology (RSM). The constructed model was evaluated by analysis of variance (ANOVA). The model goodness-of-fit and statistical significance was assessed using determination coefficients (R 2 and R 2 adj ) and the F-test. The results revealed that the R 2 proportion was greater than 0.96 for BTEX removal efficiency. The statistical analysis demonstrated that the BTEX removal efficiency was significantly correlated with the temperature, BTEX concentration, voltage, and flow rate. Voltage was the most influential variable affecting the dependent variable as it exerted a significant effect (p polluted with BTEX in conditions of low residence time and high concentrations of pollutants.

  11. Application of remote sensing to thermal pollution analysis. [satellite sea surface temperature measurement assessment

    Science.gov (United States)

    Hiser, H. W.; Lee, S. S.; Veziroglu, T. N.; Sengupta, S.

    1975-01-01

    A comprehensive numerical model development program for near-field thermal plume discharge and far field general circulation in coastal regions is being carried on at the University of Miami Clean Energy Research Institute. The objective of the program is to develop a generalized, three-dimensional, predictive model for thermal pollution studies. Two regions of specific application of the model are the power plants sites at the Biscayne Bay and Hutchinson Island area along the Florida coastline. Remote sensing from aircraft as well as satellites are used in parallel with in situ measurements to provide information needed for the development and verification of the mathematical model. This paper describes the efforts that have been made to identify problems and limitations of the presently available satellite data and to develop methods for enhancing and enlarging thermal infrared displays for mesoscale sea surface temperature measurements.

  12. An evaluation of free water surface wetlands as tertiary sewage water treatment of micro-pollutants.

    Science.gov (United States)

    Breitholtz, Magnus; Näslund, Maria; Stråe, Daniel; Borg, Hans; Grabic, Roman; Fick, Jerker

    2012-04-01

    Increased attention is currently directed towards potential negative effects of pharmaceuticals and other micro-pollutants discharged into the aquatic environment via municipal sewage water. A number of additional treatment technologies, such as ozonation, have therefore been suggested as promising tools for improving the removal efficiency of pharmaceuticals in existing Sewage Treatment Plants (STPs). Constructed wetlands are also capable of removing a variety of micro-pollutants, including some pharmaceuticals, and could hence be a resource efficient complement to more advanced treatment technologies. The purpose of the present study was therefore to increase the knowledge base concerning the potential use of constructed wetlands as a treatment step to reduce emissions of organic micro-pollutants from municipal sewage effluents. Under cold winter conditions, incoming and outgoing waters from four Swedish free water surface wetlands, operated as final treatment steps of sewage effluent from municipal STPs, were sampled and analyzed for levels of a set of 92 pharmaceuticals and 22 inorganic components as well as assessed using subchronic ecotoxicity tests with a macro-alga and a crustacean. Sixty-five pharmaceuticals were detected in the range from 1 ng L(-1) to 7.6 μg L(-1) in incoming and outgoing waters from the four investigated wetlands. Although the sampling design used in the present study lacks the robustness of volume proportional to 24h composite samples, the average estimated removal rates ranged from 42% to 52%, which correlates to previous published values. The effects observed in the ecotoxicity tests with the macro-alga (EC(50)s in the range of 7.5-46%) and the crustacean (LOECs in the range of 11.25-90%) could not be assigned to either pharmaceutical residues or metals, but in general showed that these treatment facilities release water with a relatively low toxic potential, comparable to water that has been treated with advanced tertiary

  13. Predicting long-term average concentrations of traffic-related air pollutants using GIS-based information

    Science.gov (United States)

    Hochadel, Matthias; Heinrich, Joachim; Gehring, Ulrike; Morgenstern, Verena; Kuhlbusch, Thomas; Link, Elke; Wichmann, H.-Erich; Krämer, Ursula

    Global regression models were developed to estimate individual levels of long-term exposure to traffic-related air pollutants. The models are based on data of a one-year measurement programme including geographic data on traffic and population densities. This investigation is part of a cohort study on the impact of traffic-related air pollution on respiratory health, conducted at the westerly end of the Ruhr-area in North-Rhine Westphalia, Germany. Concentrations of NO 2, fine particle mass (PM 2.5) and filter absorbance of PM 2.5 as a marker for soot were measured at 40 sites spread throughout the study region. Fourteen-day samples were taken between March 2002 and March 2003 for each season and site. Annual average concentrations for the sites were determined after adjustment for temporal variation. Information on traffic counts in major roads, building densities and community population figures were collected in a geographical information system (GIS). This information was used to calculate different potential traffic-based predictors: (a) daily traffic flow and maximum traffic intensity of buffers with radii from 50 to 10 000 m and (b) distances to main roads and highways. NO 2 concentration and PM 2.5 absorbance were strongly correlated with the traffic-based variables. Linear regression prediction models, which involved predictors with radii of 50 to 1000 m, were developed for the Wesel region where most of the cohort members lived. They reached a model fit ( R2) of 0.81 and 0.65 for NO 2 and PM 2.5 absorbance, respectively. Regression models for the whole area required larger spatial scales and reached R2=0.90 and 0.82. Comparison of predicted values with NO 2 measurements at independent public monitoring stations showed a satisfactory association ( r=0.66). PM 2.5 concentration, however, was only slightly correlated and thus poorly predictable by traffic-based variables ( rGIS-based regression models offer a promising approach to assess individual levels of

  14. Impacts of Climate Change on Surface Ozone and Intercontinental Ozone Pollution: A Multi-Model Study

    Science.gov (United States)

    Doherty, R. M.; Wild, O.; Shindell, D. T.; Zeng, G.; MacKenzie, I. A.; Collins, W. J.; Fiore, A. M.; Stevenson, D. S.; Dentener, F. J.; Schultz, M. G.; hide

    2013-01-01

    The impact of climate change between 2000 and 2095 SRES A2 climates on surface ozone (O)3 and on O3 source-receptor (S-R) relationships is quantified using three coupled climate-chemistry models (CCMs). The CCMs exhibit considerable variability in the spatial extent and location of surface O3 increases that occur within parts of high NOx emission source regions (up to 6 ppbv in the annual average and up to 14 ppbv in the season of maximum O3). In these source regions, all three CCMs show a positive relationship between surface O3 change and temperature change. Sensitivity simulations show that a combination of three individual chemical processes-(i) enhanced PAN decomposition, (ii) higher water vapor concentrations, and (iii) enhanced isoprene emission-largely reproduces the global spatial pattern of annual-mean surface O3 response due to climate change (R2 = 0.52). Changes in climate are found to exert a stronger control on the annual-mean surface O3 response through changes in climate-sensitive O3 chemistry than through changes in transport as evaluated from idealized CO-like tracer concentrations. All three CCMs exhibit a similar spatial pattern of annual-mean surface O3 change to 20% regional O3 precursor emission reductions under future climate compared to the same emission reductions applied under present-day climate. The surface O3 response to emission reductions is larger over the source region and smaller downwind in the future than under present-day conditions. All three CCMs show areas within Europe where regional emission reductions larger than 20% are required to compensate climate change impacts on annual-mean surface O3.

  15. Surface Soil Pollution By Heavy Metals A Case Study Of Two Refuse Dumpsites In Akure Metropolis

    Directory of Open Access Journals (Sweden)

    Anietie Olayemi Victoria

    2015-03-01

    Full Text Available ABSTRACT Heavy metals can be harmful to the biota and human beings when present above certain tolerable levels in the ecosystem. This lead to the study of the accumulation contamination and pollution of these metals in soils of two refuse dumpsites within and outskirts of Akure Township capital city of Ondo State Nigeria. The dumpsites are where wastes such as industrial wastes automobile wastes municipal wastes agricultural wastes etc were dumped. At each site soil samples were collected randomly from nine different points of about 1m part at depth of about 0-30cm and analyzed for heavy metals and pH. The metals analyzed include Zn Fe Co Cu Ni As Ba Pb Cr and Cd using Atomic Absorption Spectrophotometer AAS with HFAqua regia wet digestion method. The pH of the soils ranged between 7.49 and 8.66. The results revealed heavy metal presence and implicated wastes as the major sources of the heavy metals in the soils of the dumpsites. All the metals were detected in all the soil samples except Arsenic that was not detected in three points at site A. Fe had the highest concentrations while Ni had the least concentration in both sites. The trend in concentration was Fe Zn Pb Cu Cd Co Cr AsBaNi in site A While the trend in concentration was Fe Cr Zn Cu PbCd Co As Ba Ni in site B. The mean metal concentrations were compared with Department of Petroleum Resources DPR Standard values for soils in Nigeria all the metals except Cr and Cu are below the DPR target values while Cd and Arsenic are above the DPR intervention values for the two sites and this calls for immediate remediation.

  16. From Antarctica to the subtropics: Contrasted geographical concentrations of selenium, mercury, and persistent organic pollutants in skua chicks (Catharacta spp.).

    Science.gov (United States)

    Carravieri, Alice; Cherel, Yves; Brault-Favrou, Maud; Churlaud, Carine; Peluhet, Laurent; Labadie, Pierre; Budzinski, Hélène; Chastel, Olivier; Bustamante, Paco

    2017-09-01

    Seabirds integrate bioaccumulative contaminants via food intake and have revealed geographical trends of contamination in a variety of ecosystems. Pre-fledging seabird chicks are particularly interesting as bioindicators of chemical contamination, because concentrations in their tissues reflect primarily dietary sources from the local environment. Here we measured 14 trace elements and 18 persistent organic pollutants (POPs) in blood of chicks of skuas that breed in four sites encompassing a large latitudinal range within the southern Indian Ocean, from Antarctica (Adélie Land, south polar skua Catharacta maccormicki), through subantarctic areas (Crozet and Kerguelen Islands, brown skua C. lonnbergi), to the subtropics (Amsterdam Island, C. lonnbergi). Stables isotopes of carbon (δ 13 C, feeding habitat) and nitrogen (δ 15 N, trophic position) were also measured to control for the influence of feeding habits on contaminant burdens. Concentrations of mercury (Hg) and selenium (Se) were very high at all the four sites, with Amsterdam birds having the highest concentrations ever reported in chicks worldwide (4.0 ± 0.8 and 646 ± 123 μg g -1 dry weight, respectively). Blood Hg concentrations showed a clear latitudinal pattern, increasing from chicks in Antarctica to chicks in the subantarctic and subtropical islands. Interestingly, blood Se concentrations showed similar between-population differences to Hg, suggesting its involvement in protective mechanisms against Hg toxicity. Chicks' POPs pattern was largely dominated by organochlorine pesticides, in particular DDT metabolites and hexachlorobenzene (HCB). Skua chicks from subantarctic islands presented high concentrations and diversity of POPs. By contrast, chicks from the Antarctic site overall had the lowest concentrations and diversity of both metallic and organic contaminants, with the exception of HCB and arsenic. Skua populations from these sites, being naturally exposed to different quantities of

  17. An integrated Bayesian model for estimating the long-term health effects of air pollution by fusing modelled and measured pollution data: A case study of nitrogen dioxide concentrations in Scotland.

    Science.gov (United States)

    Huang, Guowen; Lee, Duncan; Scott, Marian

    2015-01-01

    The long-term health effects of air pollution can be estimated using a spatio-temporal ecological study, where the disease data are counts of hospital admissions from populations in small areal units at yearly intervals. Spatially representative pollution concentrations for each areal unit are typically estimated by applying Kriging to data from a sparse monitoring network, or by computing averages over grid level concentrations from an atmospheric dispersion model. We propose a novel fusion model for estimating spatially aggregated pollution concentrations using both the modelled and monitored data, and relate these concentrations to respiratory disease in a new study in Scotland between 2007 and 2011. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

  18. Mixtures of chemical pollutants at European legislation safety concentrations: how safe are they?

    DEFF Research Database (Denmark)

    Carvalho, Raquel N.; Arukwe, Augustine; Ait-Aissa, Selim

    2014-01-01

    , polyaromatic hydrocarbons, a surfactant, and a plasticizer), each present at its safety limit concentration imposed by the European legislation, were prepared and tested for their toxic effects. The effects of the mixtures were assessed in 35 bioassays, based on 11 organisms representing different trophic...

  19. Polychlorinated naphthalenes in urban soils: analysis, concentrations, and relation to other persistent organic pollutants

    International Nuclear Information System (INIS)

    Krauss, Martin; Wilcke, Wolfgang

    2003-01-01

    Some of the first data on polychlorinated naphthalenes (PCNs) in soils are presented from a rural-urban-industrial gradient. - We determined the concentrations of 35 PCNs, 12 PCBs, and 20 PAHs in 49 urban topsoils under different land use (house garden, roadside grassland, alluvial grassland, park areas, industrial sites, agricultural sites) and in nine rural topsoils. The sums of concentrations of 35 PCNs (Σ35 PCNs) were -1 in urban soils and -1 in rural soils. The PCN, PCB, and PAH concentrations were highest at industrial sites and in house gardens. While rural soils receive PCNs, PCBs, and PAHs by common atmospheric deposition, there are site-specific sources of PCNs, PCBs, and PAHs for urban soils such as deposition of contaminated technogenic materials. The PCN, PCB, and PAH concentrations decreased from the central urban to the rural area. In the same order the contribution of lower chlorinated PCNs and PCBs increased because they are more volatile and subject to increased atmospheric transport. The PCNs 52+60, and 73 were more abundant in soil samples than in Halowax mixtures, indicating that combustion contributed to the PCN contamination of the soils

  20. A revised method to calculate the concentration time integral of atmospheric pollutants

    International Nuclear Information System (INIS)

    Voelz, E.; Schultz, H.

    1980-01-01

    It is possible to calculate the spreading of a plume in the atmosphere under nonstationary and nonhomogeneous conditions by introducing the ''particle-in-cell'' method (PIC). This is a numerical method by which the transport of and the diffusion in the plume is reproduced in such a way, that particles representing the concentration are moved time step-wise in restricted regions (cells) and separately with the advection velocity and the diffusion velocity. This has a systematical advantage over the steady state Gaussian plume model usually used. The fixed-point concentration time integral is calculated directly instead of being substituted by the locally integrated concentration at a constant time as is done in the Gaussian model. In this way inaccuracies due to the above mentioned computational techniques may be avoided for short-time emissions, as may be seen by the fact that both integrals do not lead to the same results. Also the PIC method enables one to consider the height-dependent wind speed and its variations while the Gaussian model can be used only with averaged wind data. The concentration time integral calculated by the PIC method results in higher maximum values in shorter distances to the source. This is an effect often observed in measurements. (author)

  1. Quantifying the impact of climate change on enteric waterborne pathogen concentrations in surface water

    NARCIS (Netherlands)

    Hofstra, N.

    2011-01-01

    Climate change, among other factors, will impact waterborne pathogen concentrations in surface water worldwide, possibly increasing the risk of diseases caused by these pathogens. So far, the impacts are only determined qualitatively and thorough quantitative estimates of future pathogen

  2. Concentrations of persistent organic pollutants (POPs) in human blood samples from Mexico City, Mexico.

    Science.gov (United States)

    Orta-García, Sandra; Pérez-Vázquez, Francisco; González-Vega, Carolina; Varela-Silva, José Antonio; Hernández-González, Lidia; Pérez-Maldonado, Iván

    2014-02-15

    Studies in Mexico have demonstrated exposure to persistent organic pollutants (POPs) in people living in different sites through the country. However, studies evaluating exposure to POPs in people living in Mexico City (one of most contaminated places in the world) are scarce. Therefore, the aim of this study was to assess the levels of polybrominated diphenyl ethers (PBDEs), polychlorinated biphenyls (PCBs), dichlorodiphenyltrichloroethane (DDT) and its metabolite dichlorodiphenyldichloroethylene (DDE) in the blood as exposure biomarkers in people living in Mexico City. A total of 123 participants (blood donors aged 20-60 years) were recruited during 2010 in Mexico City. Quantitative analyses of blood samples were performed using gas chromatography coupled with mass spectrometry. Levels of the assessed compounds ranged from non-detectable (

  3. Total and Available Heavy Metal Concentrations and Assessment of Soil Pollution Indices in Selected Soils of Zanjan

    Directory of Open Access Journals (Sweden)

    M. Taheri

    2017-01-01

    Full Text Available Introduction: Soil is a hardly renewable natural resource. Although soil degradation, caused by either human activities and natural processes is a relatively slow procedure, but its effects are long lasting and most often, irreversible in the time scale of man's life. Among the most significant soil contaminants resulting from both natural and human sources, heavy metals are more important due to their long- term toxicity effects. For evaluating soil's enrichment rate by heavy metals, a wide and full study of soils background values, including total and available fractions of heavy metal contents should be done. Zanjan province has some great mines and concentrating industries of lead and zinc especially in Angoran, Mahneshan. Unfortunately produced waste materials of these industries spread over the adjacent areas. Investigations showed that accumulation of some heavy metals in vegetables and crops planted in this region had occurred. Therefore, performing some investigations in these polluted areas and assessing pollution rate and heavy metals distribution in arable lands had prime importance. Our goals were: 1 determining the total and available amounts of Cu, Pb, Zn and Cd in the soils of arable lands in polluted areas of Zanjan city, 2 producing the distribution map for the metals mentioned above and 3 calculating pollution indices in the soils. Materials and Methods: The study area was in south west of Zanjan city. For soil sampling, a 1 Km by 1 Km grid defined in ArcGIS software on landuse layer and totally 144 points that placed on agricultural lands, due to our goals, were sampled. For sampling, in a 5m radius around the point we collected some subsamples from depth of 0 - 15 cm, and after mixing the subsamples, finally a 1Kg soil sample prepared and sent to the laboratory. Sampled soils were air dried and were passed through a 2mm sieve. Soils organic matter (OM content and texture were determined by Walkely-Black and Bouyoucos

  4. Laser surface processing with controlled nitrogen-argon concentration levels for regulated surface life time

    Science.gov (United States)

    Obeidi, M. Ahmed; McCarthy, E.; Brabazon, D.

    2018-03-01

    Laser surface modification can be used to enhance the mechanical properties of a material, such as hardness, toughness, fatigue strength, and corrosion resistance. Surface nitriding is a widely used thermochemical method of surface modification, in which nitrogen is introduced into a metal or other material at an elevated temperature within a furnace. It is used on parts where there is a need for increased wear resistance, corrosion resistance, fatigue life, and hardness. Laser nitriding is a novel method of nitriding where the surface is heated locally by a laser, either in an atmosphere of nitrogen or with a jet of nitrogen delivered to the laser heated site. It combines the benefits of laser modification with those of nitriding. Recent work on high toughness tool steel samples has shown promising results due to the increased nitrogen gas impingement onto the laser heated region. Increased surface activity and nitrogen adsorption was achieved which resulted in a deeper and harder surface compared to conventional hardening methods. In this work, the effects of the laser power, pulse repetition frequency, and overlap percentage on laser surface treatment of 316 L SST steel samples with an argon-nitrogen jet will be presented. Resulting microstructure, phase type, microhardness, and wear resistance are presented.

  5. Atmospheric concentrations, occurrence and deposition of persistent organic pollutants (POPs) in a Mediterranean coastal site (Etang de Thau, France)

    Energy Technology Data Exchange (ETDEWEB)

    Castro-Jimenez, J., E-mail: javier.castro-jimenez@idaea.csic.es [European Commission-Joint Research Centre, Institute for Environment and Sustainability, via E. Fermi 2749, 21027 Ispra (Italy); Mariani, G.; Vives, I.; Skejo, H.; Umlauf, G. [European Commission-Joint Research Centre, Institute for Environment and Sustainability, via E. Fermi 2749, 21027 Ispra (Italy); Zaldivar, J.M. [European Commission-Joint Research Centre, Institute for Health and Consumer Protection, via E. Fermi 2749, 21027 Ispra (Italy); Dueri, S. [CRH, UMR 212 EME, Institut de Recherche pour le Developpement, Avenue Jean Monnet BP 171, 34203 Sete Cedex (France); Messiaen, G.; Laugier, T. [Ifremer, Environment and Resources Laboratory, Avenue Jean Monnet BP 171, 34203 Sete Cedex (France)

    2011-07-15

    Atmospheric concentrations and deposition fluxes of PCDD/F and PCB have been evaluated over a 1-year period in a Mediterranean coastal lagoon (Etang de Thau, France). Indicative PBDE air concentrations in the hot season are also reported in this work. {Sigma}2,3,7,8-PCDD/Fs and {Sigma}18PCBs (gas + particulate) air concentrations ranged from 67 to 1700 fg m{sup -3} and from 13 to 95 pg m{sup -3}, respectively whereas {Sigma}8PBDEs (gas + particulate) summer time levels varied from 158 to 230 pg m{sup -3}. The PCDD/F and PCB atmospheric occurrence over Thau lagoon and subsequent inputs to the surface waters are determined by an assemble of factors, being the seasonality of atmospheric concentration, the air mass origin and meteorological conditions important drivers. Total (wet + dry) {Sigma}2,3,7,8-PCDD/Fs and {Sigma}18PCBs deposition fluxes to Thau Lagoon waters are 117 and 715 pg m{sup -2} d{sup -1}, respectively. - Highlights: > PCDD/F and PCB atmospheric concentrations in Thau lagoon are typical from rural/semi-rural areas. > PBDE atmospheric concentrations in Thau lagoon are typical from urban/industrial sites. > PCDD/F and PCB atmospheric concentrations over Thau lagoon and inputs to surface waters are very variable, even changing between the same week of the month in two consecutive years. > Metallurgical industry may be a possible local source of PCDD/Fs in the Thau lagoon basin. > Annual PCBs and PCDD/Fs atmospheric inputs are dominated by dry deposition - PCDD/F and PCB atmospheric concentrations over Thau lagoon and inputs to surface waters are very variable, even changing between the same week of the month in two consecutive years.

  6. Effect of soil surface management on radiocesium concentrations in apple orchard and fruit

    International Nuclear Information System (INIS)

    Kusaba, Shinnosuke; Matsuoka, Kaori; Abe, Kazuhiro

    2016-01-01

    We investigated the effect of soil surface management on radiocesium accumulation in an apple orchard in Fukushima Prefecture over 4 years after Tokyo Electric Power Company’s Fukushima Daiichi nuclear power plant accident in mid-March 2011. Different types of soil surface management such as clean cultivation, intertillage management, intertillage with bark compost application, sod culture, and zeolite application were employed. The radiocesium concentrations in soil were higher in the surface layer (0–5 cm) than in the other layers. The radiocesium concentration in the surface layer soil with sod culture in 2014 increased non-significantly compared with that observed in 2011. The radiocesium concentration in the mid-layer soil (5–15 cm) managed with intertillage was higher than that in soil managed using other types of management. The radiocesium amount in the organic matter on the soil surface was the highest in sod culture, and was significantly lower in the management with intertillage. The radiocesium concentration in fruit decreased exponentially during the 4 years in each types of soil surface management. The decrease in radiocesium concentration showed similar trends with each type of soil surface management, even if the concentration in each soil layer varied according to the management applied. Furthermore, intertillage with bark compost application did not affect the radiocesium concentration in fruit. These results suggest that the soil surface management type that affected the radiocesium distribution in the soil or the compost application with conventional practice did not affect its concentration in fruit of apple trees for at least 4 years since the nuclear power plant accident, at a radiocesium deposition level similar to that recorded in Fukushima City. (author)

  7. The Relationship between Gastric Juice Nitrate/Nitrite Concentrations and Gastric Mucosal Surface pH

    OpenAIRE

    Lee, Hae Kyung; Kim, Hyunjung; Kim, Hyung-Keun; Cho, Young-Seok; Kim, Byung-Wook; Han, Sok-Won; Maeng, Lee So; Chae, Hiun-Suk; Kim, Hee Na

    2012-01-01

    Purpose To investigate gastric juice nitrate/nitrite concentration according to mucosal surface pH extent (area) of gastric corpus intimately contacting the gastric juice. Materials and Methods We included ninety-nine patients with dyspepsia. To evaluate gastric mucosal surface pH and its extent, gastric chromosocpy was performed by spraying phenol red dye on the corpus mucosa and estimating the extent of area with color changed. Nitrate/nitrite concentrations and pH of gastric juice were mea...

  8. Implications of different approaches for characterizing ambient air pollutant concentrations within the urban airshed for time-series studies and health benefits analyses

    Directory of Open Access Journals (Sweden)

    Winquist Andrea

    2011-05-01

    Full Text Available Abstract Background In time-series studies of the health effects of urban air pollutants, decisions must be made about how to characterize pollutant levels within the airshed. Methods Emergency department visits for pediatric asthma exacerbations were collected from Atlanta hospitals. Concentrations of carbon monoxide, nitrogen dioxide, ozone, sulfur dioxide, particulate matter less than 10 microns in diameter (PM10, particulate matter less than 2.5 microns in diameter (PM2.5, and the PM2.5 components elemental carbon, organic carbon, and sulfate were obtained from networks of ambient air quality monitors. For each pollutant we created three different daily metrics. For one metric we used the measurements from a centrally-located monitor; for the second we averaged measurements across the network of monitors; and for the third we estimated the population-weighted average concentration using an isotropic spatial model. Rate ratios for each of the metrics were estimated from time-series models. Results For pollutants with relatively homogeneous spatial distributions we observed only small differences in the rate ratio across the three metrics. Conversely, for spatially heterogeneous pollutants we observed larger differences in the rate ratios. For a given pollutant, the strength of evidence for an association (i.e., chi-square statistics tended to be similar across metrics. Conclusions Given that the chi-square statistics were similar across the metrics, the differences in the rate ratios for the spatially heterogeneous pollutants may seem like a relatively small issue. However, these differences are important for health benefits analyses, where results from epidemiological studies on the health effects of pollutants (per unit change in concentration are used to predict the health impacts of a reduction in pollutant concentrations. We discuss the relative merits of the different metrics as they pertain to time-series studies and health benefits

  9. Radionuclide activities and elemental concentrations in sediments from a polluted marine environment (Saronikos Gulf-Greece)

    International Nuclear Information System (INIS)

    Papaefthymiou, Helen; Gkaragkouni, Anastasia; Papatheodorou, George; Geraga, Maria

    2017-01-01

    The levels and depth distributions of the natural radionuclides 238 U, 232 Th, 226 Ra, 40 K and the man-made 137 Cs were analyzed by γ-ray spectrometry, while the concentrations of 26 chemical elements were measured by INAA in sediment samples collected from the organic mud layer that covers the Keratsini-Psitalia strait, Saronikos gulf (Greece). The average activity concentration values of 226 Ra, 232 Th and 40 K were lower when compared, whereas that of 238 U was comparable to the average Greek and world values. The elemental contamination of the sediments was estimated on the basis of the calculated EF values. The results revealed high EF values of As, Br, Cr, Ni, Sb, Se, Zn ranging from 160 for Br to 10 for Cr, whose main sources are probable related to contaminated sewage outfall from the area of Athens and the Piraeus Harbour. (author)

  10. Numerical simulation of the double pits stress concentration in a curved casing inner surface

    Directory of Open Access Journals (Sweden)

    Wei Yan

    2016-12-01

    Full Text Available Sour or sweet oil fields development is common in recent years. Casing and tubing are usually subjected to pitting corrosion because of exposure to the strong corrosion species, such as CO2, H2S, and saline water. When the corrosion pits formed in the casing inner surface, localized stress concentration will occur and the casing strength will be degraded. Thus, it is essential to evaluate the degree of stress concentration factor accurately. This article performed a numerical simulation on double pits stress concentration factor in a curved inner surface using the finite element software ABAQUS. The results show that the stress concentration factor of double pits mainly depends on the ratio of two pits distance to the pit radius (L/R. It should not be only assessed by the absolute distance between the two pits. When the two pits are close and tangent, the maximum stress concentration factor will appear on the inner tangential edges. Stress concentration increased by double pits in a curved casing inner surface is more serious than that in a flat surface. A correction factor of 1.9 was recommended in the curved inner surface double pits stress concentration factor predict model.

  11. Mixtures of Chemical Pollutants at European Legislation Safety Concentrations: How Safe Are They?

    Science.gov (United States)

    Carvalho, Raquel N.; Arukwe, Augustine; Ait-Aissa, Selim; Bado-Nilles, Anne; Balzamo, Stefania; Baun, Anders; Belkin, Shimshon; Blaha, Ludek; Brion, François; Conti, Daniela; Creusot, Nicolas; Essig, Yona; Ferrero, Valentina E. V.; Flander-Putrle, Vesna; Fürhacker, Maria; Grillari-Voglauer, Regina; Hogstrand, Christer; Jonáš, Adam; Kharlyngdoh, Joubert B.; Loos, Robert; Lundebye, Anne-Katrine; Modig, Carina; Olsson, Per-Erik; Pillai, Smitha; Polak, Natasa; Potalivo, Monica; Sanchez, Wilfried; Schifferli, Andrea; Schirmer, Kristin; Sforzini, Susanna; Stürzenbaum, Stephen R.; Søfteland, Liv; Turk, Valentina; Viarengo, Aldo; Werner, Inge; Yagur-Kroll, Sharon; Zounková, Radka; Lettieri, Teresa

    2014-01-01

    The risk posed by complex chemical mixtures in the environment to wildlife and humans is increasingly debated, but has been rarely tested under environmentally relevant scenarios. To address this issue, two mixtures of 14 or 19 substances of concern (pesticides, pharmaceuticals, heavy metals, polyaromatic hydrocarbons, a surfactant, and a plasticizer), each present at its safety limit concentration imposed by the European legislation, were prepared and tested for their toxic effects. The effects of the mixtures were assessed in 35 bioassays, based on 11 organisms representing different trophic levels. A consortium of 16 laboratories was involved in performing the bioassays. The mixtures elicited quantifiable toxic effects on some of the test systems employed, including i) changes in marine microbial composition, ii) microalgae toxicity, iii) immobilization in the crustacean Daphnia magna, iv) fish embryo toxicity, v) impaired frog embryo development, and vi) increased expression on oxidative stress-linked reporter genes. Estrogenic activity close to regulatory safety limit concentrations was uncovered by receptor-binding assays. The results highlight the need of precautionary actions on the assessment of chemical mixtures even in cases where individual toxicants are present at seemingly harmless concentrations. PMID:24958932

  12. [Speciation and Risk Assessment of Heavy Metals in Surface Sediments from the Heavily Polluted Area of Xiaoqing River].

    Science.gov (United States)

    Huang, Ying; Li, Yong-xia; Gao, Fu-wei; Xu, Min-min; Sun, Bo; Wang, Ning; Yang, Jian

    2015-06-01

    Th concentrations of Cu, As, Pb, Zn, Cr, Cd, Ni in interstitial water were analyzed by ICP-MS from the heavily polluted area of Xiaoqing River. A modified BCR's sequential extraction procedure was used to investigate the fraction of the heavy metals in the surface sediments. The aquatic toxicity of heavy metals in interstitial water was assessed by US Water Quality Criteria (CCC, CMC). Based on the speciation of the metals in the surface sediments, the ecological risk of heavy metals was assessed with methods of risk assessment code (RAC) and potential ecological risk index. The results showed that: The tested heavy metals would not pose chronic toxicity for aquatic ecosystem. The contents of heavy metals (Cu, Pb, Zn, Cr, Cd, Ni) in the surface sediments were higher than the background values of the local soils, indicating enrichment of heavy metals. Cu, As and Ni were mainly composed with residual fractions, Pb and Cr were mainly constituted of residual and oxidizable fractions, and mass fractions of Zn and Cd existed mainly in acid soluble and reducible factions. The contents of bio-available fractions of Cd, Zn, Cr and Pb in the sediments were higher those of residual fractions, indicating high potential for secondary release. Based on calculation of RAC method, Cu, Pb, Cr and As posed extremely low to low risk to the environment. Accordingly, Ni was of low to medium risk, Cd was of medium to high risk, and Zn was of medium to extremely high risk to the environment. The potential ecological risk of heavy metals in the sediments was in the descending order of Cd > Zn > Ni > As > Cu > Cr > Pb. Cd had high to very high potential ecological risk comparing with the other heavy metals. The potential ecological risk indexes (RI) of the heavy metals in the sediments were in the range of 136.83-264.83, and posed medium to high potential ecological risks for Xiaoqing River.

  13. Pollutant Concentrations and Emission Rates from Scripted Natural Gas Cooking Burner Use in Nine Northern California Homes

    Energy Technology Data Exchange (ETDEWEB)

    Singer, Brett C. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Delp, William W. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Lorenzetti, David M. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Maddalena, Randy L. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2016-10-01

    METHODS: Combustion pollutant concentrations were measured during the scripted operation of natural gas cooking burners in nine homes. In addition to a base condition of closed windows, no forced air unit (FAU) use, and no mechanical exhaust, additional experiments were conducted while operating an FAU and/or vented range hood. Test homes included a 26m2 two-room apartment, a 134m2 first floor flat, and seven detached homes of 117–226m2. There were four single-story, four two-story and one 1.5 story homes. Cooktop use entailed boiling and simmering activities, using water as a heat sink. Oven and broiler use also were simulated. Time-resolved concentrations of carbon dioxide (CO2), nitric oxide (NO), nitrogen oxides (NOX), nitrogen dioxide (NO2), particles with diameters of 6 nm or larger (PN), carbon monoxide (CO), and fine particulate matter (PM2.5) were measured in the kitchen (K) and bedroom area (BR) of each home. CO2, NO, NO2, and PN data from sequential experiments were analyzed to quantify the contribution of burner use to the highest 1h and 4h time-integrated concentrations in each room. RESULTS: Four of the nine homes had kitchen 1h NO2 exceed the national ambient air quality standard (100 ppb). Two other homes had 1h NO2 exceed 50 ppb in the kitchen, and three had 1h NO2 above 50 ppb in the bedroom, suggesting substantial exposures to anyone at home when burners are used for a single substantial event. In all homes, the highest 1h kitchen PN exceeded 2 x105 cm-3-h, and the highest 4h PN exceeded 3 x105 cm-3-hr in all homes. The lowest 1h kitchen/bedroom ratios were 1.3–2.1 for NO in the apartment and two open floor plan homes. The largest K/BR ratios of 1h NO2 were in a two-story 1990s home retrofitted for deep energy savings: ratios in this home were 3.3 to 6.6. Kitchen 1h ratios of NO, NO2 and PN to CO2 were used to calculate fuel normalized emission factors (ng J-1). Range hood use substantially reduced cooking burner pollutant concentrations both

  14. Predicting daily ragweed pollen concentrations using Computational Intelligence techniques over two heavily polluted areas in Europe.

    Science.gov (United States)

    Csépe, Zoltán; Makra, László; Voukantsis, Dimitris; Matyasovszky, István; Tusnády, Gábor; Karatzas, Kostas; Thibaudon, Michel

    2014-04-01

    Forecasting ragweed pollen concentration is a useful tool for sensitive people in order to prepare in time for high pollen episodes. The aim of the study is to use methods of Computational Intelligence (CI) (Multi-Layer Perceptron, M5P, REPTree, DecisionStump and MLPRegressor) for predicting daily values of Ambrosia pollen concentrations and alarm levels for 1-7 days ahead for Szeged (Hungary) and Lyon (France), respectively. Ten-year daily mean ragweed pollen data (within 1997-2006) are considered for both cities. 10 input variables are used in the models including pollen level or alarm level on the given day, furthermore the serial number of the given day of the year within the pollen season and altogether 8 meteorological variables. The study has novelties as (1) daily alarm thresholds are firstly predicted in the aerobiological literature; (2) data-driven modelling methods including neural networks have never been used in forecasting daily Ambrosia pollen concentration; (3) algorithm J48 has never been used in palynological forecasts; (4) we apply a rarely used technique, namely factor analysis with special transformation, to detect the importance of the influencing variables in defining the pollen levels for 1-7 days ahead. When predicting pollen concentrations, for Szeged Multi-Layer Perceptron models deliver similar results with tree-based models 1 and 2 days ahead; while for Lyon only Multi-Layer Perceptron provides acceptable result. When predicting alarm levels, the performance of Multi-Layer Perceptron is the best for both cities. It is presented that the selection of the optimal method depends on climate, as a function of geographical location and relief. The results show that the more complex CI methods perform well, and their performance is case-specific for ≥2 days forecasting horizon. A determination coefficient of 0.98 (Ambrosia, Szeged, one day and two days ahead) using Multi-Layer Perceptron ranks this model the best one in the literature

  15. Surface modification of platelet concentrate bags to reduce biofilm formation and transfusion sepsis.

    Science.gov (United States)

    Wilson-Nieuwenhuis, Joels S T; Dempsey-Hibbert, Nina; Liauw, Christopher M; Whitehead, Kathryn A

    2017-12-01

    Bacterial contamination of blood products poses a major risk in transfusion medicine, including transfusions involving platelet products. Although testing systems are in place for routine screening of platelet units, the formation of bacterial biofilms in such units may decrease the likelihood that bacteria will be detected. This work determined the surface properties of p-PVC platelet concentrate bags and investigated how these characteristics influenced biofilm formation. Serratia marcescens and Staphylococcus epidermidis, two species commonly implicated in platelet contamination, were used to study biofilm growth. The platelet concentrate bags were physically flattened to determine if reducing the surface roughness altered biofilm formation. The results demonstrated that the flattening process of the platelet bags affected the chemistry of the surface and reduced the surface hydrophobicity. Flattening of the surfaces resulted in a reduction in biofilm formation for both species after 5 days, with S. marcescens demonstrating a greater reduction. However, there was no significant difference between the smooth and flat surfaces following 7 days' incubation for S. marcescens and no significant differences between any of the surfaces following 7 days' incubation for S. epidermidis. The results suggest that flattening the p-PVC surfaces may limit potential biofilm formation for the current duration of platelet storage time of 5 days. It is hoped that this work will enhance the understanding of how surface properties influence the development of microbial biofilms in platelet concentrate bags in order to devise a solution to discourage biofilm formation. Copyright © 2017 Elsevier B.V. All rights reserved.

  16. Effect of concentration and temperature on surface tension of sodium hyaluronate saline solutions.

    Science.gov (United States)

    Ribeiro, Walkiria; Mata, José Luis; Saramago, Benilde

    2007-06-19

    The effect of concentration and temperature on the surface tension of sodium hyaluronate (NaHA) saline solutions was investigated using the technique of the shape of pendant drops. The decay rate of the surface tension with the increase of NaHA concentration was well-described by the empirical Hua-Rosen equation. Adsorption at the air-liquid interface was estimated using the Gibbs equation. The temperature dependence of a dilute solution and a semidilute entangled solution was numerically fitted with a second-order polynomial equation. The surface behavior of the NaHA saline solutions was interpreted in terms of their known viscoelastic properties.

  17. Concentration and determination of trace organic pollutants in water. [Phenols; organics; halomethanes

    Energy Technology Data Exchange (ETDEWEB)

    Chang, R.C.Y.

    1976-10-01

    A method was developed for determining phenols in natural water, treated drinking water, and wastewater. They are determined by selective sorption on a macroreticular anion-exchange resin, elution with acetone-water, concentration by evaporation after extraction with methylene chloride, and measurement by gas chromatography. Techniques are given for preventing phenol loss. Common inorganic ions and many organic substances cause no interference; neutral organics that are retained by the resin can be removed by a methanol wash. The method gives accurate results for phenol, alkyl- and chloro-substituted phenols in the ppB to ppM range. Volatile compounds, as well as less volatile gas chromatographable compounds can also be determined. Resin purification, sorption columns preparation, thermal desorptions, the mini-sampler, method for analysis of real water for organics and development of analytical method are presented. Finally, a rapid method was developed for concentrating and determining halomethanes in drinking water. The halomethanes are determined by sorption on mini-samplers of macroreticular resin. The halomethanes sorbed on resin are eluted with two milliliters of methanol. Halomethanes are separated on a Tenax-GC column and determined by electron capture gas chromatography. Storage of halomethanes on the mini-sampler was studied. Real water samples were analyzed. (DLC)

  18. Dependence of Ideality Factor in Lateral PNP Transistors on Surface Carrier Concentration

    Science.gov (United States)

    Li, Xingji; Yang, Jianqun; Barnaby, Hugh J.; Galloway, Kenneth F.; Schrimpf, Ronald D.; Fleetwood, Daniel M.; Liu, Chaoming

    2017-06-01

    The influence of surface carrier concentration on the ideality factor of excess base current (ΔIB) in gated lateral PNP (GLPNP) bipolar junction transistors (BJTs) induced by 1-MeV electrons is investigated. ΔIB in LPNP BJTs is impacted by the surface carrier density and radiation-induced interface traps. In GLPNP BJTs, the surface carrier concentration can be controlled by the voltage applied to a gate over the base region. The ideality factor changes after irradiation, and its dependence on emitter-base voltage (VEB) is a function of gate voltage. For the irradiated devices, as the gate voltage decreases from +20 to -5 V, the ideality factor for excess base current changes from a single slope to two-slope behavior. The majority carrier concentration at the surface of the base, controlled by the gate voltage, impacts the excess base current and its ideality factor.

  19. Association between serum concentrations of persistent organic pollutants and smoking in Koreans: A cross-sectional study

    Directory of Open Access Journals (Sweden)

    Ho Jung Moon

    2017-02-01

    Full Text Available Background: Studies on the associations between persistent organic pollutants (POPs and smoking according to gender and smoking amount (cigarettes/day are limited, and the results regarding the relationship between POPs and smoking are not completely consistent across studies. Objectives: The smoking rate in Korea is one of the highest among the Organization for Economic Cooperation and Development (OECD countries. We investigated the association between serum concentrations of POPs and cigarette smoking in Koreans by smoking status (never-smoker/ever-smoker and smoking amount (cigarettes/day according to gender. Methods: Serum concentrations of 32 polychlorinated biphenyls (PCBs and 19 organochlorine pesticides (OCPs were measured in 401 participants (232 men and 169 women who received health examinations during the Korean Cancer Prevention Study-II. We compared POP levels in ever-smokers and never-smokers and conducted multivariate logistic regression analyses to identify associations between POPs and smoking. Results: Among women, the concentrations of PCB 156, PCB 167, and PCB 180 were significantly higher in ever-smokers than in never-smokers. After adjustments for age, body mass index, gamma-glutamyl transpeptidase, and alcohol intake, serum PCB 157 concentration was positively associated with male ever-smokers (OR 2.26; 95% CI, 1.01–5.04. In addition, trans-nonachlordane in OCPs as well as PCBs was significantly positively related with female ever-smokers (OR 3.21; 95% CI, 1.04–9.86. We found that subjects who smoked fewer than 15 cigarettes/day had a higher risk of having high POP concentrations than never-smokers. Conclusions: These results indicate that smoking may be associated with human serum POPs levels.

  20. Association between serum concentrations of persistent organic pollutants and smoking in Koreans: A cross-sectional study.

    Science.gov (United States)

    Moon, Ho Jung; Lim, Jung-Eun; Jee, Sun Ha

    2017-02-01

    Studies on the associations between persistent organic pollutants (POPs) and smoking according to gender and smoking amount (cigarettes/day) are limited, and the results regarding the relationship between POPs and smoking are not completely consistent across studies. The smoking rate in Korea is one of the highest among the Organization for Economic Cooperation and Development (OECD) countries. We investigated the association between serum concentrations of POPs and cigarette smoking in Koreans by smoking status (never-smoker/ever-smoker) and smoking amount (cigarettes/day) according to gender. Serum concentrations of 32 polychlorinated biphenyls (PCBs) and 19 organochlorine pesticides (OCPs) were measured in 401 participants (232 men and 169 women) who received health examinations during the Korean Cancer Prevention Study-II. We compared POP levels in ever-smokers and never-smokers and conducted multivariate logistic regression analyses to identify associations between POPs and smoking. Among women, the concentrations of PCB 156, PCB 167, and PCB 180 were significantly higher in ever-smokers than in never-smokers. After adjustments for age, body mass index, gamma-glutamyl transpeptidase, and alcohol intake, serum PCB 157 concentration was positively associated with male ever-smokers (OR 2.26; 95% CI, 1.01-5.04). In addition, trans-nonachlordane in OCPs as well as PCBs was significantly positively related with female ever-smokers (OR 3.21; 95% CI, 1.04-9.86). We found that subjects who smoked fewer than 15 cigarettes/day had a higher risk of having high POP concentrations than never-smokers. These results indicate that smoking may be associated with human serum POPs levels. Copyright © 2016. Production and hosting by Elsevier B.V.

  1. Correlation Between Concentration of Air Pollutants and Occurrence of Cardiac Arrhythmias in a Region with Humid Continental Climate

    Science.gov (United States)

    Knezović, Marijana; Pintarić, Sanja; Mornar Jelavić, Marko; Nesek, Višnja; Krstačić, Goran; Vrsalović, Mislav; Šikić, Aljoša; Zeljković, Ivan; Pintarić, Hrvoje

    2017-03-01

    In this study, we investigated the correlation of air temperature, pressure and concentration of air pollutants with the rate of admissions for cardiac arrhythmias at two clinical centers in the area with a humid continental climate. This retrospective study included 3749 patients with arrhythmias admitted to emergency department (ED). They were classified into four groups: supraventricular tachycardia (SVT), ventricular tachycardia (VT), atrial fibrillation/undulation (Afib/Aund), and palpitations (with no ECG changes, or with sinus tachycardia and extrasystoles). The number of patients, values of meteorological parameters (average daily values of air temperature, pressure and relative humidity) and concentrations of air pollutants (particles of dimensions ~10 micrometers or less (PM(10)), ozone (O(3)) and nitrogen dioxide (NO(2))) were collected during a two-year period ( July 2008-June 2010). There were 1650 (44.0%), 1525 (40.7%), 451 (12.0%) and 123 (3.3%) patients with palpitations, Afib/Aund, SVT and VT, respectively. Spearman’s correlation yielded positive correlation between the occurrence of arrhythmias and air humidity on the day (r=0.07), and 1 (r=0.08), 2 (r=0.09) and 3 days before (r=0.09), and NO(2) particles on the day (r=0.08) of ED admission; palpitations and air humidity on the day (r=0.11), and 1 (r=0.09), 2 (r=0.07) and 3 days before (r=0.10), and PM(10) (r=0.11) and NO(2) (r=0.08) particles on the day of ED admission; and Afi b/Aund and air humidity 2 days before (r=0.08) ED admission (ppollutants in the region with a humid continental climate.

  2. Black carbon concentrations in the highly polluted Kathmandu Valley, Nepal: a three year monitoring with a dual-spot Aethalometer

    Science.gov (United States)

    Rupakheti, Maheswar; Drinovec, Luka; Puppala, SivaPraveen; Mahata, Khadak; Rupakheti, Dipesh; Kathayat, Bhogendra; Singdan, Pratik; Panday, Arnico; Lawrence, Mark

    2016-04-01

    Our knowledge about ambient black carbon (BC) in the vast Himalayan region, a region vulnerable to impacts of global warming, is very limited due to unavailability of a long-term ambient monitoring. Here we present results from a continuous monitoring of ambient BC concentrations, with a new generation Aethalometer (AE33), over a three year period (January 2013- January 2016) at a semi-urban site in the highly polluted Kathmandu Valley in the foothills of the central Himalaya, one of the most polluted cities in the world. This is the longest time series of BC concentrations that have been monitored with AE33 (which uses the dual-spot technique for a real-time filter loading compensation) in highly polluted ambient environment. The measurements were carried out under the framework of project SusKat (Sustainable Atmosphere for the Kathmandu Valley). BC concentrations were found to be extremely high, especially in winter and the pre-monsoon period, with the hourly-averaged values often exceeding 50 μg/m3. BC concentrations showed a clear diurnal cycle with a prominent peak around 8-9 am and a second peak around 8-9 pm local time in all four seasons. Night-time BC was also fairly high. The diurnal cycle was driven by a combination of increased emissions from traffic, cooking activities, garbage burning, and lower mixing heights (˜200 m) and reduced horizontal ventilation in the mornings and evenings. BC concentrations showed significant seasonal variations - a maximum in winter season and minimum during the monsoon (rainy) season, with monthly average values in the range 5-30 μg/m3. An increase in emissions from the operation of over 100 brick kilns in winter and spring, and an increase in the use of small but numerous diesel power generators during hours with power cuts contributed significantly to ambient BC concentrations in the valley. Fractional contributions of biomass burning and fossil fuel combustion to BC was estimated based on a real-time method for

  3. Enhanced removal of humic acid from micro-polluted source water in a surface discharge plasma system coupled with activated carbon.

    Science.gov (United States)

    Wang, Tiecheng; Li, Yujuan; Qu, Guangzhou; Sun, Qiuhong; Liang, Dongli; Hu, Shibin; Zhu, Lingyan

    2017-09-01

    Surface discharge plasma (SDP) combined with activated carbon (AC) was employed to eliminate dissolved organic matter from micro-polluted source water, with humic acid (HA) as the model pollutant. Synergistic effect on HA removal was observed in the SDP-AC system; HA removal efficiency reached 60.9% within 5-min treatment in the SDP-AC system with 5.0 g AC addition, whereas 16.7 and 17.4% of HA were removed in sole SDP system and AC adsorption, respectively. Scanning electron microscope and Boehm titration analysis showed that chemical reactions between active species and functional groups of AC occurred. The existence of isopropanol or benzoquinone exhibited inhibitive effects on HA removal in the SDP system, while these inhibitive effects were weakened in the SDP-AC system. The influences of AC on ozone equivalent concentration and H 2 O 2 concentration were evaluated, and there were approximately 39 and 20% decline in ozone equivalent concentration and H 2 O 2 concentration within 6-min treatment in the SDP-AC system, respectively, compared with those in the sole SDP system. Dissolved organic carbon, specific ultraviolet absorbance, and UV absorption ratios analysis demonstrated that the SDP treatment destroyed the chromophoric groups, double bonds, and aromatic structure of HA molecules, and these destructive actions were strengthened by AC.

  4. Water Pollution

    International Nuclear Information System (INIS)

    Goni, J.

    1984-01-01

    This work is about the water pollution. The air and the water interaction cycles is the main idea of the geochemical pollution conception. In the water surface as well as in the deep aquifers we can found cough metals or minerals from the athmosferic air. The activities of mercury fluor and nitrates are important to the pollution study

  5. Use of Enterococcus, BST and sterols as indicators for poultry pollution source tracking in surface and groundwater

    Science.gov (United States)

    This study has applied Enterococcus, Bacterial Source Tracking (BST) and sterol analysis for pollution source identification from poultry sources. Fecal contamination was detected in 100% of surface water and 15% of groundwater sites tested. E. faecium was the dominant species in aged litter sampl...

  6. SIMPLE: assessment of non-point phosphorus pollution from agricultural land to surface waters by means of a new methodology

    NARCIS (Netherlands)

    Schoumans, O.F.; Mol-Dijkstra, J.P.; Akkermans, L.M.W.; Roest, C.W.J.

    2002-01-01

    In the past, environmental phosphorus (P) parameters like soil P indices have been used to catogorize the potential risk of P losses from agricultural land. In order to assess the actual risk of P pollution of groundwater and surface waters, dynamic process oriented soil and water quality models

  7. The effects of large-scale atmospheric flows on berylium-7 activity concentration in surface air.

    Science.gov (United States)

    Arkian, Foroozan; Meshkatee, Amir-Hussain; Bidokhti, Ali Akbar

    2010-09-01

    Understanding the exchange mechanism between stratosphere and troposphere is one of the most important concerns of meteorologists and climatologists for decades. Different methods are being adopted to study those mechanisms. One of those methods is the study upon the tropospheric concentration of conserve or passive entities with stratospheric origin. One of those passive entities is (7)Be that is produced upon the incident of cosmic rays on light atmospheric nuclei in the stratosphere. The availability of 5 years observations of (7)Be concentration in surface air in Tehran (35 degrees 41(') N, 51 degrees 18(') E) encouraged us to investigate meteorological condition effect on the surface concentration of (7)Be. Also, the intention was to see if there was any intrusion of stratospheric air into the troposphere at the time of high surface concentration of (7)Be and scavenging mechanism when the concentration was low. During the course of this study, it has been found that (7)Be concentration is high whenever there is a jet stream over Tehran. Since high-level jet streams normally form near tropopause folding, it could be interpreted as a sign of the intrusion of stratospheric air into the troposphere. It was also found that high concentration of (7)Be in the Tehran surface air in summer is associated with an upper ridge on 500 hPa surface located east of the city, and low concentration in winter is associated with an upper trough. The latter normally is seen whenever there is precipitation that suggests wet scavenging could be the reason for that observed low concentration.

  8. Organohalogen pollutants in surface particulates from workshop floors of four major e-waste recycling sites in China and implications for emission lists.

    Science.gov (United States)

    Zeng, Yan-Hong; Tang, Bin; Luo, Xiao-Jun; Zheng, Xiao-Bo; Peng, Ping-An; Mai, Bi-Xian

    2016-11-01

    To examine the environmental pollution associated with e-waste recycling activities, the concentrations of organohologenated pollutants (OHPs), i.e., short- and medium-chain chlorinated paraffins (SCCPs and MCCPs), polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs), and several other halogenated flame retardants (OHFRs), were investigated in surface particulates from the workshop floors of four major e-waste recycling sites (Taizhou, Guiyu, Dali and Qingyuan) in China. The mean levels of SCCPs, MCCPs, PCBs, PBDEs and OHFRs in surface particulates ranged from 30,000-61,000, 170,000-890,000, 2700-27,000, 52,000-240,000, and 62,000-140,000ng/g dry weight (dw), respectively. OHFRs, including decabromodiphenyl ethane, dechlorane plus, 1,2-bis(2,4,6-tribromophenoxy)ethane, tetrabromobisphenol A, hexabromocyclododecanes, polybrominated biphenyls, hexabromobenzene, pentabromotoluene, and pentabromoethylbenzene, were frequently (>50% detection frequency) detected in surface particulates with mean concentration ranges of 39,000-63,000, 310-2700, 98-16,000, 21,000-56,000, 55-5700, 1700-27,000, 42-1600, 3.2-220, and 5.8-12ng/g dw, respectively. The composition of OHPs varied depend on the e-waste items processing in different regions. Guiyu and Dali were typical sites contaminated by halogenated flame retardants (HFRs) and CPs, respectively, while Qingyuan, and Taizhou were representative PCB-polluted regions. The evidence produced by this preliminary study indicated that electronic devices and plastics may account for the high content of HFRs and the metal products are likely the major source of CPs in these e-waste sites. Copyright © 2016. Published by Elsevier B.V.

  9. Effects of different sulfuric acid etching concentrations on PEEK surface bonding to resin composite.

    Science.gov (United States)

    Chaijareenont, Pisaisit; Prakhamsai, Sasiprapha; Silthampitag, Patcharawan; Takahashi, Hidekazu; Arksornnukit, Mansuang

    2018-01-26

    This study evaluated the effects of surface pretreatment with different concentrations of sulfuric acid etching on surface properties and bonding between Polyetheretherketone (PEEK) and a resin composite. Six groups of surface pretreatment (no pretreatment, etched with 70, 80, 85, 90, and 98% sulfuric acid for 60 s) were treated on PEEK. Surface roughness, scanning electron microscopy (SEM) and atomic force microscopy (AFM) analyses were examined. Shear bond strength (SBS) and cross-sectional observations of the interfaces were performed. One-way ANOVA analysis revealed differences in surface roughness and SBS between groups. The 90 and 98% sulfuric acid etching significantly achieved the highest SBS (psulfuric acid etching were suggested to be the optimal concentration to improve adhesion between PEEK and the resin composite.

  10. Non-destructive pollution exposure assessment in the European hedgehog (Erinaceus europaeus): II. Hair and spines as indicators of endogenous metal and As concentrations

    International Nuclear Information System (INIS)

    D'Have, Helga; Scheirs, Jan; Mubiana, Valentine Kayawe; Verhagen, Ron; Blust, Ronny; Coen, Wim de

    2006-01-01

    The role of hair and spines of the European hedgehog as non-destructive monitoring tools of metal (Ag, Al, Cd, Co, Cr, Cu, Fe, Ni, Pb, Zn) and As pollution in terrestrial ecosystems was investigated. Our results showed that mean pollution levels of a random sample of hedgehogs in Flanders are low to moderate. Yet, individual hedgehogs may be at risk for metal toxicity. Tissue distribution analyses (hair, spines, liver, kidney, muscle and fat tissue) indicated that metals and As may reach considerable concentrations in external tissues, such as hair and spines. Positive relationships were observed between concentrations in hair and those in liver, kidney and muscle for Al, Co, Cr, Cu, and Pb (0.43 < r < 0.85). Spine concentrations were positively related to liver, kidney and muscle concentrations for Cd, Co, Cr, Cu and Pb (0.37 < r < 0.62). Hair Ag, As, Fe and Zn and spine Ag, Al, As and Fe were related to metal concentrations in one or two of the investigated internal tissues (0.31 < r < 0.45). The regression models presented here may be used to predict metal and As concentrations in internal tissues of hedgehogs when concentrations in hair or spines are available. The present study demonstrated the possibility of using hair and spines for non-destructive monitoring of metal and As pollution in hedgehogs. - Hedgehog hair and spines are promising non-destructive biomonitoring tools of terrestrial metal pollution

  11. Comparison of two estimation methods for surface area concentration using number concentration and mass concentration of combustion-related ultrafine particles

    Science.gov (United States)

    Park, Ji Young; Raynor, Peter C.; Maynard, Andrew D.; Eberly, Lynn E.; Ramachandran, Gurumurthy

    Recent research has suggested that the adverse health effects caused by nanoparticles are associated with their surface area (SA) concentrations. In this study, SA was estimated in two ways using number and mass concentrations and compared with SA (SA meas) measured using a diffusion charger (DC). Aerosol measurements were made twice: once starting in October 2002 and again starting in December 2002 in Mysore, India in residences that used kerosene or liquefied petroleum gas (LPG) for cooking. Mass, number, and SA concentrations and size distributions by number were measured in each residence. The first estimation method (SA PSD) used the size distribution by number to estimate SA. The second method (SA INV) used a simple inversion scheme that incorporated number and mass concentrations while assuming a lognormal size distribution with a known geometrical standard deviation. SA PSD was, on average, 2.4 times greater (range = 1.6-3.4) than SA meas while SA INV was, on average, 6.0 times greater (range = 4.6-7.7) than SA meas. The logarithms of SA PSD and SA INV were found to be statistically significant predictors of the logarithm of SA meas. The study showed that particle number and mass concentration measurements can be used to estimate SA with a correction factor that ranges between 2 and 6.

  12. Assessing determinants of maternal blood concentrations for persistent organic pollutants and metals in the eastern and western Canadian Arctic

    Energy Technology Data Exchange (ETDEWEB)

    Curren, Meredith S., E-mail: meredith.curren@hc-sc.gc.ca [Chemicals Surveillance Bureau, Healthy Environments and Consumer Safety Branch, Health Canada, 269 Laurier Avenue West, Ottawa, Ontario (Canada); Liang, Chun Lei, E-mail: chun.lei.liang@hc-sc.gc.ca [Environmental Health Science and Research Bureau, Healthy Environments and Consumer Safety Branch, Health Canada, 50 Columbine Driveway, Tunney' s Pasture, Ottawa, Ontario (Canada); Davis, Karelyn, E-mail: karelyn.davis@hc-sc.gc.ca [Environmental Health Science and Research Bureau, Healthy Environments and Consumer Safety Branch, Health Canada, 50 Columbine Driveway, Tunney' s Pasture, Ottawa, Ontario (Canada); Kandola, Kami, E-mail: Kami_Kandola@gov.nt.ca [Government of the Northwest Territories, Yellowknife, Northwest Territories (Canada); Brewster, Janet, E-mail: jbrewster@gov.nu.ca [Government of Nunavut, Iqaluit, Nunavut (Canada); Potyrala, Mary, E-mail: mary_potyrala@yahoo.ca [Government of Nunavut, Iqaluit, Nunavut (Canada); Chan, Hing Man, E-mail: laurie.chan@uottawa.ca [Center for Advanced Research in Environmental Genomics, University of Ottawa, 20 Marie-Curie, Ottawa, Ontario (Canada)

    2015-09-15

    Aboriginal peoples in the Canadian Arctic are exposed to persistent organic pollutants (POPs) and metals mainly through their consumption of a traditional diet of wildlife items. Recent studies indicate that many human chemical levels have decreased in the north, likely due to a combination of reduced global chemical emissions, dietary shifts, and risk mitigation efforts by local health authorities. Body burdens for chemicals in mothers can be further offset by breastfeeding, parity, and other maternal characteristics. We have assessed the impact of several dietary and maternal covariates following a decade of awareness of the contaminant issue in northern Canada, by performing multiple stepwise linear regression analyses from blood concentrations and demographic variables for 176 mothers recruited from Nunavut and the Northwest Territories during the period 2005–2007. A significant aboriginal group effect was observed for the modeled chemicals, except for lead and cadmium, after adjusting for covariates. Further, blood concentrations for POPs and metals were significantly associated with at least one covariate of older age, fewer months spent breastfeeding, more frequent eating of traditional foods, or smoking during pregnancy. Cadmium had the highest explained variance (72.5%) from just two significant covariates (current smoking status and parity). Although Inuit participants from the Northwest Territories consumed more traditional foods in general, Inuit participants from coastal communities in Nunavut continued to demonstrate higher adjusted blood concentrations for POPs and metals examined here. While this is due in part to a higher prevalence of marine mammals in the eastern Arctic diet, it is possible that other aboriginal group effects unrelated to diet may also contribute to elevated chemical body burdens in Canadian Arctic populations. - Highlights: • In 2005–07, younger age was related to lower levels of chemicals in northern Canada. • Eastern

  13. Assessing determinants of maternal blood concentrations for persistent organic pollutants and metals in the eastern and western Canadian Arctic

    International Nuclear Information System (INIS)

    Curren, Meredith S.; Liang, Chun Lei; Davis, Karelyn; Kandola, Kami; Brewster, Janet; Potyrala, Mary; Chan, Hing Man

    2015-01-01

    Aboriginal peoples in the Canadian Arctic are exposed to persistent organic pollutants (POPs) and metals mainly through their consumption of a traditional diet of wildlife items. Recent studies indicate that many human chemical levels have decreased in the north, likely due to a combination of reduced global chemical emissions, dietary shifts, and risk mitigation efforts by local health authorities. Body burdens for chemicals in mothers can be further offset by breastfeeding, parity, and other maternal characteristics. We have assessed the impact of several dietary and maternal covariates following a decade of awareness of the contaminant issue in northern Canada, by performing multiple stepwise linear regression analyses from blood concentrations and demographic variables for 176 mothers recruited from Nunavut and the Northwest Territories during the period 2005–2007. A significant aboriginal group effect was observed for the modeled chemicals, except for lead and cadmium, after adjusting for covariates. Further, blood concentrations for POPs and metals were significantly associated with at least one covariate of older age, fewer months spent breastfeeding, more frequent eating of traditional foods, or smoking during pregnancy. Cadmium had the highest explained variance (72.5%) from just two significant covariates (current smoking status and parity). Although Inuit participants from the Northwest Territories consumed more traditional foods in general, Inuit participants from coastal communities in Nunavut continued to demonstrate higher adjusted blood concentrations for POPs and metals examined here. While this is due in part to a higher prevalence of marine mammals in the eastern Arctic diet, it is possible that other aboriginal group effects unrelated to diet may also contribute to elevated chemical body burdens in Canadian Arctic populations. - Highlights: • In 2005–07, younger age was related to lower levels of chemicals in northern Canada. • Eastern

  14. Reanalysis of and attribution to near-surface ozone concentrations in Sweden during 1990-2013

    Science.gov (United States)

    Andersson, Camilla; Alpfjord, Heléne; Robertson, Lennart; Karlsson, Per Erik; Engardt, Magnuz

    2017-11-01

    We have constructed two data sets of hourly resolution reanalyzed near-surface ozone (O3) concentrations for the period 1990-2013 for Sweden. Long-term simulations from a chemistry-transport model (CTM) covering Europe were combined with hourly ozone concentration observations at Swedish and Norwegian background measurement sites using retrospective variational data analysis. The reanalysis data sets show improved performance over the original CTM when compared to independent observations. In one of the reanalyses, we included all available hourly near-surface O3 observations, whilst in the other we carefully selected time-consistent observations. Based on the second reanalysis we investigated statistical aspects of the distribution of the near-surface O3 concentrations, focusing on the linear trend over the 24-year period. We show that high near-surface O3 concentrations are decreasing and low O3 concentrations are increasing, which is reflected in observed improvement of many health and vegetation indices (apart from those with a low threshold). Using the CTM we also conducted sensitivity simulations to quantify the causes of the observed change, focusing on three factors: change in hemispheric background concentrations, meteorology and anthropogenic emissions. The rising low concentrations of near-surface O3 in Sweden are caused by a combination of all three factors, whilst the decrease in the highest O3 concentrations is caused by European O3 precursor emissions reductions. While studying the impact of anthropogenic emissions changes, we identified systematic differences in the modeled trend compared to observations that must be caused by incorrect trends in the utilized emissions inventory or by too high sensitivity of our model to emissions changes.

  15. Identification of key factors affecting the water pollutant concentration in the sluice-controlled river reaches of the Shaying River in China via statistical analysis methods.

    Science.gov (United States)

    Dou, Ming; Zhang, Yan; Zuo, Qiting; Mi, Qingbin

    2015-08-01

    The construction of sluices creates a strong disturbance in water environmental factors within a river. The change in water pollutant concentrations of sluice-controlled river reaches (SCRRs) is more complex than that of natural river segments. To determine the key factors affecting water pollutant concentration changes in SCRRs, river reaches near the Huaidian Sluice in the Shaying River of China were selected as a case study, and water quality monitoring experiments based on different regulating modes were implemented in 2009 and 2010. To identify the key factors affecting the change rates for the chemical oxygen demand of permanganate (CODMn) and ammonia nitrogen (NH3-N) concentrations in the SCRRs of the Huaidian Sluice, partial correlation analysis, principal component analysis and principal factor analysis were used. The results indicate four factors, i.e., the inflow quantity from upper reaches, opening size of sluice gates, water pollutant concentration from upper reaches, and turbidity before the sluice, which are the common key factors for the CODMn and NH3-N concentration change rates. Moreover, the dissolved oxygen before a sluice is a key factor for the permanganate concentration from CODMn change rate, and the water depth before a sluice is a key factor for the NH3-N concentration change rate. Multiple linear regressions between the water pollutant concentration change rate and key factors were established via multiple linear regression analyses, and the quantitative relationship between the CODMn and NH3-N concentration change rates and key affecting factors was analyzed. Finally, the mechanism of action for the key factors affecting the water pollutant concentration changes was analyzed. The results reveal that the inflow quantity from upper reaches, opening size of sluice gates, permanganate concentration from CODMn from upper reaches and dissolved oxygen before the sluice have a negative influence and the turbidity before the sluice has a positive

  16. AFM Studies of Salt Concentration Effects on the (110) Surface Structure of Tetragonal Lysozyme Crystals

    Science.gov (United States)

    Pusey, Marc Lee; Gorti, Sridhar; Forsythe, Elizabeth; Konnert, John

    2002-01-01

    Previous high resolution AFM studies of the (110) surface of tetragonal chicken egg white lysozyme crystals had shown that only one of two possible molecular surfaces is present, those constituting the completed 43 helices. These suggested that the crystal growth process was by the solution-phase assembly of the growth units, which then attach to the surface. However, the best fit for the imaged surfaces, vs. those predicted based upon the bulk crystallographic coordinates, were obtained when the packing about the 43 helices was "tightened up", while maintaining the underlying crystallographic unit cell spacing. This results in a widening of the gap between adjacent helices, and the top- most layer(s) may no longer be in contact. We postulated that the tightened packing about the helices is a result of the high salt concentrations in the bulk solution, used to crystallize the protein, driving hydrophobic interactions. Once the crystal surface is sufficiently buried by subsequent growth layers the ratio of salt to protein molecules decreases and the helices relax to their bulk crystallographic coordinates. The crystal surface helix structure is thus a reflection of the solution structure, and the tightness of the packing about the 43 helices would be a function of the bulk salt concentration. AFM images of the (110) surface of tetragonal lysozyme crystals grown under low (2%) and high (5%) NaCl concentrations reveal differences in the packing about the 43 helices consistent with the above proposal.

  17. Comparisons of elemental concentrations in hair of the inhabitants of heavy metal polluted areas with those of normal Japanese, 2

    International Nuclear Information System (INIS)

    Takeuchi, Takayuki; Nakano, Yukihiro; Aoki, Atsushi; Ohmori, Sayoko; Tsukatani, Tuneo.

    1987-01-01

    The authors previously discussed the concentration differences and the correlation coefficients among the elements measured in hair samples collected from inhabitants living in areas polluted with mercury, arsenic or cadmium. In the present paper, the factor contributions and the factor loadings of the elements are estimated for each factor by making use of principal component analysis from the correlation coefficient matrix described in the previous paper. In order to examine the somatic effect of the contamination by heavy metals on individuals, the factor score of each sample is also obtained for each factor, where the sum of the multiples of elemental sample concentration and factor loading for the main 12 elements are calculated. For the first factor, the factor loadings of such elements as Ca, Mg, Zn and Cu are large, while those of Cl and Br are large in negative values. For the second factor, the factor loadings of such elements as K and Na are large. For the fifth factor, the factor loading of S is large, and S has little relation to other elements. These results are consistent with experimental results presented elsewhere. Unlike such experimental results, however, the present study suggests that Ca is one of the most correlated elements to the first factor. (Nogami, K.)

  18. Anionic detergent, LAS pollution in coastal surface water of the Turkish Straits System

    OpenAIRE

    Balcıoğlu, Esra Billur

    2014-01-01

    Abstract In this study anionic detergent, LAS concentration was surveyed in the coastal surface water of the Turkish Straits System (TSS) in January and August of 2012. Samples were taken at 15 stations in the TSS, which consists of Straits of Istanbul and Çanakkale and the Sea of Marmara. The mean value of LAS was found for January in the Istanbul Strait as 22.88 μg/L, in the Çanakkale Strait as 24.24 μg/L, in the Sea of Marmara Sea as 26.06 μg/L and for August in the Istanbul Strait as 43.4...

  19. Microplastic pollution in the surface waters of the Bohai Sea, China.

    Science.gov (United States)

    Zhang, Weiwei; Zhang, Shoufeng; Wang, Juying; Wang, Yan; Mu, Jingli; Wang, Ping; Lin, Xinzhen; Ma, Deyi

    2017-12-01

    The ubiquitous presence and persistency of microplastics in aquatic environments is of particular concern because these pollutants represent an increasing threat to marine organisms and ecosystems. An identification of the patterns of microplastic distribution will help to understand the scale of their potential effect on the environment and on organisms. In this study, the occurrence and distribution of microplastics in the Bohai Sea are reported for the first time. We sampled floating microplastics at 11 stations in the Bohai Sea using a 330 μm trawling net in August 2016. The abundance, composition, size, shape and color of collected debris samples were analyzed after pretreatment. The average microplastic concentration was 0.33 ± 0.34 particles/m 3 . Micro-Fourier transform infrared spectroscopy analysis showed that the main types of microplastics were polyethylene, polypropylene, and polystyrene. As the size of the plastics decreased, the percentage of polypropylene increased, whereas the percentages of polyethylene and polystyrene decreased. Plastic fragments, lines, and films accounted for most of the collected samples. Accumulation at some stations could be associated with transport and retention mechanisms that are linked to wind and the dynamics of the rim current, as well as different sources of the plastics. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. Environmental consequences of Pollution and its Impact on earth's surface climate Using Geospatial Technology

    Science.gov (United States)

    Kumar, Amit

    2016-07-01

    Modern transportation is an indispensable ingredient for development, allowing the pressure group of labor, supplies and goods, and enabling general public to access key resources and services. Climate change is a most important threat to sustainable development in any developing or developed country. Urban air pollution is on the rise, due to rapid economic and inhabitants growth and an increase in motorization. Modern transport is fundamental for improvement, allowing the movement of goods and enabling general public to access key resources and services. Travel today is relatively faster and people across the world are travelling more than ever before. Its stipulate regarding forecast is an indispensable part of transportation development in order to evaluate future needs of an urban area. Over increasing traffic concentration posed continued threat to ambient air quality and responsible for producing agents of physical condition hazards. Geospatial technology provides the smartest approach to resolve these inconvenience as it can cover a large area in a fraction of time. The research work focuses on the recognition of traffic intensities with increasing of SO2, NO2 and noise level considered at particular traffic sites in the Varanasi, Uttar Pradesh, India. SO2, NO2 and Noise levels recorded in the city, are much higher than the permissible level and are likely to causes associated health and psychological illnesses to nearby inhabitant.

  1. Study on hot melt pressure sensitive coil material for removing surface nuclear pollution dust

    Science.gov (United States)

    Wang, Jing; Li, Jiao; Wang, Jianhui; Zheng, Li; Li, Jian; Lv, Linmei

    2018-02-01

    A new method for removing surface nuclear pollution by using hot melt pressure sensitive membrane was presented. The hot melt pressure sensitive membrane was designed and prepared by screening hot melt pressure sensitive adhesive and substrate. The simulated decontamination test of the hot melt pressure sensitive membrane was performed by using 100 mesh and 20 mesh standard sieve dust for simulation of nuclear explosion fall ash and radioactive contaminated particles, respectively. It was found that the single decontamination rate of simulated fall ash and contaminated particles were both above 80% under pressure conditions of 25kPa or more at 140°C. And the maximum single decontamination rate was 92.5%. The influence of heating temperature and pressure on the decontamination rate of the membrane was investigated at the same time. The results showed that higher heating temperature could increase the decontamination rate by increasing the viscosity of the adhesive. When the adhesive amount of the adhesive layer reached saturation, a higher pressure could increase the single decontamination rate also.

  2. Global Pollution of Surface Waters from Point and Nonpoint Sources of Nitrogen

    Directory of Open Access Journals (Sweden)

    G. van Drecht

    2001-01-01

    Full Text Available Global 0.5- by 0.5-degree resolution estimates are presented on the fate of nitrogen (N stemming from point and nonpoint sources, including plant uptake, denitrification, leaching from the rooting zone, rapid flow through shallow groundwater, and slow flow through deep groundwater to riverine systems. Historical N inputs are used to describe the N flows in groundwater. For nonpoint N sources (agricultural and natural ecosystems, calculations are based on local hydrology, climate, geology, soils, climate and land use combined with data for 1995 on crop production, N inputs from N fertilizers and animal manure, and estimates for ammonia emissions, biological N fixation, and N deposition. For point sources, our estimates are based on population densities and human N emissions, sanitation, and treatment. The results provide a first insight into the magnitude of the N losses from soil-plant systems and point sources in various parts of the world, and the fate of N during transport in atmosphere, groundwater, and surface water. The contribution to the river N load by anthropogenic N pollution is dominant in many river basins in Europe, Asia, and North Africa. Our model results explain much of the variation in measured N export from different world river basins.

  3. Using satellite data to guide emission control strategies for surface ozone pollution

    Science.gov (United States)

    Jin, X.; Fiore, A. M.

    2017-12-01

    Surface ozone (O3) has adverse effects on public health, agriculture and ecosystems. As a secondary pollutant, ozone is not emitted directly. Ozone forms from two classes of precursors: NOx and VOCs. We use satellite observations of formaldehyde (a marker of VOCs) and NO2 (a marker of NOx) to identify areas which would benefit more from reducing NOx emissions (NOx-limited) versus areas where reducing VOC emissions would lead to lower ozone (VOC-limited). We use a global chemical transport model (GEOS-Chem) to develop a set of threshold values that separate the NOx-limited and VOC-limited conditions. Combining these threshold values with a decadal record of satellite observations, we find that U.S. cities (e.g. New York, Chicago) have shifted from VOC-limited to NOx-limited ozone production regimes in the warm season. This transition reflects the NOx emission controls implemented over the past decade. Increasing NOx sensitivity implies that regional NOx emission control programs will improve O3 air quality more now than it would have a decade ago.

  4. Development of land use regression models for nitrogen dioxide, ultrafine particles, lung deposited surface area, and four other markers of particulate matter pollution in the Swiss SAPALDIA regions.

    Science.gov (United States)

    Eeftens, Marloes; Meier, Reto; Schindler, Christian; Aguilera, Inmaculada; Phuleria, Harish; Ineichen, Alex; Davey, Mark; Ducret-Stich, Regina; Keidel, Dirk; Probst-Hensch, Nicole; Künzli, Nino; Tsai, Ming-Yi

    2016-04-18

    Land Use Regression (LUR) is a popular method to explain and predict spatial contrasts in air pollution concentrations, but LUR models for ultrafine particles, such as particle number concentration (PNC) are especially scarce. Moreover, no models have been previously presented for the lung deposited surface area (LDSA) of ultrafine particles. The additional value of ultrafine particle metrics has not been well investigated due to lack of exposure measurements and models. Air pollution measurements were performed in 2011 and 2012 in the eight areas of the Swiss SAPALDIA study at up to 40 sites per area for NO2 and at 20 sites in four areas for markers of particulate air pollution. We developed multi-area LUR models for biannual average concentrations of PM2.5, PM2.5 absorbance, PM10, PMcoarse, PNC and LDSA, as well as alpine, non-alpine and study area specific models for NO2, using predictor variables which were available at a national level. Models were validated using leave-one-out cross-validation, as well as independent external validation with routine monitoring data. Model explained variance (R(2)) was moderate for the various PM mass fractions PM2.5 (0.57), PM10 (0.63) and PMcoarse (0.45), and was high for PM2.5 absorbance (0.81), PNC (0.87) and LDSA (0.91). Study-area specific LUR models for NO2 (R(2) range 0.52-0.89) outperformed combined-area alpine (R (2)  = 0.53) and non-alpine (R (2)  = 0.65) models in terms of both cross-validation and independent external validation, and were better able to account for between-area variability. Predictor variables related to traffic and national dispersion model estimates were important predictors. LUR models for all pollutants captured spatial variability of long-term average concentrations, performed adequately in validation, and could be successfully applied to the SAPALDIA cohort. Dispersion model predictions or area indicators served well to capture the between area variance. For NO2, applying study

  5. Short-Term Fluctuations in Air Pollution and Asthma in Scania, Sweden. Is the Association Modified by Long-Term Concentrations?

    Directory of Open Access Journals (Sweden)

    Tahir Taj

    Full Text Available Asthma is one of the most common respiratory diseases in the world. Research has shown that temporal increases in air pollution concentrations can aggravate asthma symptoms. The aim of this study was to assess whether individuals living in areas with higher air pollution concentrations responded differently to short-term temporal exposure to air pollution than those living in lower air pollution areas.The study was designed as a case-crossover study in Scania, Sweden. Outcome data was visits to primary health care clinics with asthma as the main complaint during the years 2007 to 2010. Nitrogen dioxide levels were obtained from 21 different air pollution monitoring stations. Short-term exposure was defined as the average concentration four days prior to the visit. Data was pooled for areas above and below a two-year average NO2 concentration of 10 μg/m3, dispersion modelled with an emission database.The short-term association between NO2 and asthma visits seemed stronger in areas with NO2 levels below 10 μg/m3, with an odds ratio (OR of 1.15 (95% confidence interval (CI: 1.08-1.23 associated with a 10 μg/m3 increase in NO2 compared to areas above 10 μg/m3 NO2 levels, where corresponding OR of 1.09 (95% CI: 1.02-1.17. However, this difference was not statistically significant. (p = 0.13.The study provided some evidence, although not statistically significant, that short-term associations between air pollution and asthma may depend on background air pollution levels. However, we cannot rule out that the association is due to other spatially dependent factors in Scania. The study should be reproduced in other study areas.

  6. Long-term variations in the surface air 7Be concentration and climatic changes.

    Science.gov (United States)

    Jiwen, Liu; Starovoitova, Valeriia N; Wells, Douglas P

    2013-02-01

    We have used EML Surface Air Sampling Program (SASP) data to analyze the long-term trend in (7)Be surface concentration and address possible correlation between this long-term trend and climatic changes, namely changes in precipitation patterns and temperature. In this paper we present (7)Be concentration data from 23 sites, spanning over 25 years, all over the world, and extract long-term trend parameter using two independent techniques. The (7)Be concentrations in most stations show a pronounced decreasing trend, potentially corresponding to statistically significant changes in transporting (7)Be from upper atmosphere source to these sites. Weak negative correlation between (7)Be concentration and amount of precipitation was also observed. However, more data from more representative sites around the world are needed the statistical robustness of this trend. Published by Elsevier Ltd.

  7. The osmolyte xylitol reduces the salt concentration of airway surface liquid and may enhance bacterial killing

    Science.gov (United States)

    Zabner, Joseph; Seiler, Michael P.; Launspach, Janice L.; Karp, Philip H.; Kearney, William R.; Look, Dwight C.; Smith, Jeffrey J.; Welsh, Michael J.

    2000-10-01

    The thin layer of airway surface liquid (ASL) contains antimicrobial substances that kill the small numbers of bacteria that are constantly being deposited in the lungs. An increase in ASL salt concentration inhibits the activity of airway antimicrobial factors and may partially explain the pathogenesis of cystic fibrosis (CF). We tested the hypothesis that an osmolyte with a low transepithelial permeability may lower the ASL salt concentration, thereby enhancing innate immunity. We found that the five-carbon sugar xylitol has a low transepithelial permeability, is poorly metabolized by several bacteria, and can lower the ASL salt concentration in both CF and non-CF airway epithelia in vitro. Furthermore, in a double-blind, randomized, crossover study, xylitol sprayed for 4 days into each nostril of normal volunteers significantly decreased the number of nasal coagulase-negative Staphylococcus compared with saline control. Xylitol may be of value in decreasing ASL salt concentration and enhancing the innate antimicrobial defense at the airway surface.

  8. Helium concentration in tungsten nano-tendril surface morphology using Elastic Recoil Detection

    International Nuclear Information System (INIS)

    Woller, K.B.; Whyte, D.G.; Wright, G.M.; Doerner, R.P.; De Temmerman, G.

    2013-01-01

    Helium (He) concentrations in tungsten nano-tendrils (W fuzz) have been measured for the first time using Elastic Recoil Detection (ERD). Fuzzy and non-fuzzy W surfaces were analyzed in order to illuminate the role of He in the transition in surface morphologies. Samples grown in the PISCES-A and PILOT-PSI experiments allowed a survey of surface temperature ranging from T s = 470–2595 K and of He fluence on the order of Φ He ∼ 10 24 –10 27 ions/m 2 . He concentrations measured in the bulk of W fuzz layers are roughly uniform with bulk He concentration 1–4 at.% while samples with just He in the near surface peaked at 1–2 at.%. This confirms that the nano-tendrils are filled with high pressure He bubbles since the solubility of He in W is ∼10 −5 at.%. This indicates that the ∼1000 K temperature fuzz-growth threshold is determined by the response of the W, not the near-surface He concentration

  9. Presence of e-EDCs in surface water and effluents of pollution sources in Sai Gon and Dong Nai river basin

    Directory of Open Access Journals (Sweden)

    Tam Le Thi Minh

    2016-01-01

    Full Text Available This study aimed to assess the presence of estrogenic endocrine disrupting compounds (e-EDCs including estriol, bisphenol A (BPA, atrazine (ATZ, octylphenol, octylphenol diethoxylate, octylphenol triethoxylate, nonylphenol, Nonylphenol triethoxylate (NPE3, nonylphenol diethoxylate (NPE2 and 17β-estradiol in: (i Sai Gon and Dong Nai river waters which have been major raw water sources for drinking water supply for Ho Chi Minh City (HCMC and neighbouring provinces, and (ii water pollution sources located in their catchment basin. NPE3 and NPE2 were detected in most of the surface water samples. Concentrations of NPE3 were in a range of less than 5.9–235 ng L−1, whereas BPA was detected at significantly high concentrations in the dry season in canals in HCMC. In the upstream of Sai Gon and Dong Nai Rivers, ATZ concentrations were observed at water intake of water treatment plants served for HCMC water supply system. Similarly, high potential risk of NPE2 and NPE3 contamination at Phu Cuong Bridge near Hoa Phu water intake was identified. The significant correlation between NPE2, dissolved organic carbon and total nitrogen was found. Estrogenic equivalent or estrogenic activity of Sai Gon and Dong Nai Rivers was lower than those of the previous studies. Compared with other studies, e-EDCs of pollution in Sai Gon river basin were relatively low.

  10. Concentration of uranium in the drinking and surface water around the WIPP site

    International Nuclear Information System (INIS)

    Khaing, H.; Lemons, B.G.; Thakur, P.

    2016-01-01

    Activity concentration of uranium isotopes ( 238 U, 234 U and 235 U) were analyzed in drinking and surface water samples collected in the vicinity of the WIPP site using alpha spectroscopy. The purpose of this study was to investigate the changes in uranium concentrations (if any) in the vicinity of the WIPP site and whether the February 14, 2014 radiation release event at the WIPP had any detectable impact on the water bodies around the WIPP. (author)

  11. How private vehicle use increases ambient air pollution concentrations at schools during the morning drop-off of children

    Science.gov (United States)

    Adams, Matthew D.; Requia, Weeberb J.

    2017-09-01

    A child's exposure to environmental pollutants can have life-long health effects. Thus it is critical to understand the potential exposure pathways. In this paper, we examine the increase in ambient PM2.5 concentrations at schools from private vehicle use for dropping children off at school. In North America, students are commonly driven to school in a private vehicle. Additionally, students walk or cycle, or take a school bus. Our vehicle surveys recorded between 23 and 116 personal vehicles at 25 schools, where enrolment ranged from 160 to 765 students. We fit a linear regression model to predict the number of vehicles at schools we did not observe within our study area, which explained 57% of the variation in our surveys. A microsimulation traffic model was created for each of the 86 schools we studied. Outputs from the traffic model were used to determine the emissions generated at each school. PM2.5 emissions varied from 0.14 to 6.38 g. Lastly, we dispersed the emissions produced by private vehicles dropping off students, which are emissions generated by unnecessary trips because students further than walking distance are provided transportation by the school board. At the drop-off location in front of the school, we found ambient concentration increases of at least 5 μg/m3, 10 μg/m3, 25 μg/m3 and 50 μg/m3 during 16.8%, 7.6%, 2.0% and 0.5% of the mornings, respectively. This research was conducted in a medium-sized North American city and should allow transferability to similar cities. We conclude that the use of private vehicles can significantly increase local concentrations, regardless of background conditions.

  12. Concentration polarization and desalination in nanochannels: Effect of surface charge dynamics

    Science.gov (United States)

    Andersen, Mathias B.; Bruus, Henrik; Mani, Ali; Bazant, Martin Z.

    2011-11-01

    Mani, Zangle, and Santiago (Langmuir, 25, 3898-3916) have shown that at microchannel-nanochannel junctions the coupled effect of concentration polarization and surface conduction can lead to long range propagation of bulk ion-depletion shocks. Essential for this phenomena is the surface charge which for many materials depends on both the concentration and the pH of the local bulk electrolyte. Standard models predict that the surface charge decreases with decreasing concentration leading to the contradictory expectation that there is little or no surface charge in the depleted region and hence no mechanism to sustain long range propagation of desalination shocks. We show that this simple prediction fails to take into account axial transport terms. As such, we couple a surface charge model with the Poisson-Nernst-Planck equations for electric potential and ionic species combined with the Navier-Stokes and continuity equations for fluid velocity. Motivated by experimental work we consider steady-state solutions at the dead end of a nanochannel against a membrane, a scenario where especially space charge and electroosmotic flow are important. Our results suggest that the surface charge density remains finite and does not vanish, and even grows, as the depletion front propagates through the channel.

  13. Global modelling of surface water quality: a multi-pollutant approach

    NARCIS (Netherlands)

    Kroeze, C.; Gabbert, S.G.M.; Hofstra, N.; Koelmans, A.A.; Li, Ang; Löhr, A.; Ludwig, F.; Strokal, M.; Verburg, C.; Vermeulen, Lucie; Vliet, van Michelle T.H.; Vries, de Wim; Wang, M.; Wijnen, van Jikke

    2016-01-01

    In many world regions the availability of clean water is at risk. Pollution of rivers and coastal seas poses a threat to aquatic ecosystems and society. Here, we review representative examples of mathematical models that simulate pollutant flows from land to sea at global and continental scales. We

  14. Application of Full Factorial Experimental Design and Response Surface Methodology for Chromite Beneficiation by Knelson Concentrator

    Directory of Open Access Journals (Sweden)

    Gul Akar Sen

    2016-01-01

    Full Text Available The present work is undertaken to determine the effect of operational variables, namely: feed rate, centrifugal force and fluidization water flow rate on the efficiency of Knelson concentrator for chromite ore beneficiation. A full factorial design with three factors at three levels and response surface methodology (RSM were applied for this purpose. The quadratic models were developed to predict the concentrate Cr2O3 grade and recovery as the process responses. The results suggest that all the variables affect the grade and recovery of the Cr2O3 concentrate to some degree. However, the fluidization water rate was found as the most effective parameter.

  15. Polycyclic aromatic hydrocarbons in urban street dust and surface soil: comparisons of concentration, profile, and source.

    Science.gov (United States)

    Wang, De-Gao; Yang, Meng; Jia, Hong-Liang; Zhou, Lei; Li, Yi-Fan

    2009-02-01

    Street dust and surface soil samples in urban areas of Dalian, a coastal city in Liaoning Province, China, were collected and analyzed for 25 polycyclic aromatic hydrocarbons (PAHs). The concentrations, distribution, and sources of PAHs in dust and soil were determined. The concentrations of total PAHs in street dust ranged between 1890 and 17,070 ng/g (dry weight), with an average of 7460 ng/g, whereas the concentrations of total PAHs in surface soil varied greatly, from 650 to 28,900 ng/g, with a mean value of 6440 ng/g. Statistical paired t-test confirmed that total PAH concentrations have no significant difference between street dust and surface soil. Mean PAH concentrations in two type samples were much higher at industrial sites than at business/residential or garden sites. PAHs were dominated by higher molecular weight PAH (4- to 6-ring) homologues, which accounted for about 73% and 72% of total PAHs in street dust and surface soil, respectively. Principal component analysis was used in source apportionment of PAHs in dust and soil. Pyrogenic and petrogenic sources contributed 70% and 22.4% of total PAHs in street dusts, and fossil fuel (coal and petroleum) and biomass combustion accounted for 64.4% and 5.6% of total PAHs in pyrogenic sources, respectively. In surface soil, total PAHs were dominated by pyrogenic sources. The diagnostic ratios of benz[a]anthracene/chrysene confirmed that PAHs in street dust and surface soil of a Dalian urban zone might come mostly from the emission of local sources.

  16. Macro-invertebrate decline in surface water polluted with imidacloprid: a rebuttal and some new analyses.

    Directory of Open Access Journals (Sweden)

    Martina G Vijver

    Full Text Available Imidacloprid, the largest selling insecticide in the world, has received particular attention from scientists, policymakers and industries due to its potential toxicity to bees and aquatic organisms. The decline of aquatic macro-invertebrates due to imidacloprid concentrations in the Dutch surface waters was hypothesised in a recent paper by Van Dijk, Van Staalduinen and Van der Sluijs (PLOS ONE, May 2013. Although we do not disagree with imidacloprid's inherent toxicity to aquatic organisms, we have fundamental concerns regarding the way the data were analysed and interpreted. Here, we demonstrate that the underlying toxicity of imidacloprid in the field situation cannot be understood except in the context of other co-occurring pesticides. Although we agree with Van Dijk and co-workers that effects of imidacloprid can emerge between 13 and 67 ng/L we use a different line of evidence. We present an alternative approach to link imidacloprid concentrations and biological data. We analysed the national set of chemical monitoring data of the year 2009 to estimate the relative contribution of imidacloprid compared to other pesticides in relation to environmental quality target and chronic ecotoxicity threshold exceedances. Moreover, we assessed the relative impact of imidacloprid on the pesticide-induced potential affected fractions of the aquatic communities. We conclude that by choosing to test a starting hypothesis using insufficient data on chemistry and biology that are difficult to link, and by ignoring potential collinear effects of other pesticides present in Dutch surface waters Van Dijk and co-workers do not provide direct evidence that reduced taxon richness and abundance of macroinvertebrates can be attributed to the presence of imidacloprid only. Using a different line of evidence we expect ecological effects of imidacloprid at some of the exposure profiles measured in 2009 in the surface waters of the Netherlands.

  17. Comparison of Land-Use Regression Modeling with Dispersion and Chemistry Transport Modeling to Assign Air Pollution Concentrations within the Ruhr Area

    Directory of Open Access Journals (Sweden)

    Frauke Hennig

    2016-03-01

    Full Text Available Two commonly used models to assess air pollution concentration for investigating health effects of air pollution in epidemiological studies are Land Use Regression (LUR models and Dispersion and Chemistry Transport Models (DCTM. Both modeling approaches have been applied in the Ruhr area, Germany, a location where multiple cohort studies are being conducted. Application of these different modelling approaches leads to differences in exposure estimation and interpretation due to the specific characteristics of each model. We aimed to compare both model approaches by means of their respective aims, modeling characteristics, validation, temporal and spatial resolution, and agreement of residential exposure estimation, referring to the air pollutants PM2.5, PM10, and NO2. Residential exposure referred to air pollution exposure at residences of participants of the Heinz Nixdorf Recall Study, located in the Ruhr area. The point-specific ESCAPE (European Study of Cohorts on Air Pollution Effects-LUR aims to temporally estimate stable long-term exposure to local, mostly traffic-related air pollution with respect to very small-scale spatial variations (≤100 m. In contrast, the EURAD (European Air Pollution Dispersion-CTM aims to estimate a time-varying average air pollutant concentration in a small area (i.e., 1 km2, taking into account a range of major sources, e.g., traffic, industry, meteorological conditions, and transport. Overall agreement between EURAD-CTM and ESCAPE-LUR was weak to moderate on a residential basis. Restricting EURAD-CTM to sources of local traffic only, respective agreement was good. The possibility of combining the strengths of both applications will be the next step to enhance exposure assessment.

  18. Reformulated and alternative fuels: modeled impacts on regional air quality with special emphasis on surface ozone concentration.

    Science.gov (United States)

    Schell, Benedikt; Ackermann, Ingmar J; Hass, Heinz

    2002-07-15

    The comprehensive European Air Pollution and Dispersion model system was used to estimate the impacts of the usage of reformulated and alternative fuels on regional air quality with special emphasis on surface ozone concentrations. A severe western European summer smog episode in July 1994 has been used as a reference, and the model predictions have been evaluated for this episode. A forecast simulation for the year 2005 (TREND) has been performed, including the future emission development based on the current legislation and technologies available. The results of the scenario TREND are used as a baseline for the other 2005 fuel scenarios, including fuel reformulation, fuel sulfur content, and compressed natural gas (CNG) as an alternative fuel. Compared to the year 1994, significant reductions in episode peak ozone concentrations and ozone grid hours are predicted for the TREND scenario. These reductions are even more pronounced within the investigated alternative and reformulated fuel scenarios. Especially, low sulfur fuels are appropriate for an immediate improvement in air quality, because they effect the emissions of the whole fleet. Furthermore, the simulation results indicate that the introduction of CNG vehicles would also enhance air quality with respect to ozone.

  19. Runoff of particle bound pollutants from urban impervious surfaces studied by analysis of sediments from stormwater traps

    International Nuclear Information System (INIS)

    Jartun, Morten; Ottesen, Rolf Tore; Steinnes, Eiliv; Volden, Tore

    2008-01-01

    Runoff sediments from 68 small stormwater traps around the harbor of urban Bergen, Norway, were sampled and the concentrations of polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), heavy metals, and total organic carbon (TOC) were determined in addition to grain size. Our study provides empirical data from a large area in the interface between the urban and marine environment, studying the active transport of pollutants from land-based sources. The results of the analyses clearly demonstrate the importance of the urban environment representing a variety of contamination sources, and that stormwater runoff is an important dispersion mechanism of toxic pollutants. The concentrations of different pollutants in urban runoff sediments show that there are several active pollution sources supplying the sewage systems with PCBs, PAHs and heavy metals such as lead (Pb), zinc (Zn) and cadmium (Cd). The concentration of PCB 7 in the urban runoff sediments ranged between 16 , the concentration range was < 0.2-80 mg/kg, whereas the concentration ranges of Pb, Zn and Cd were 9-675, 51.3-4670 and 0.02-11.1 mg/kg respectively. Grain size distribution in 21 selected samples varied from a median particle diameter of 13 to 646 μm. However, several samples had very fine-grained particles even up to the 90 percentile of the samples, making them available for stormwater dispersion in suspended form. The sampling approach proposed in this paper will provide environmental authorities with a useful tool to examine ongoing urban contamination of harbors and similar recipients

  20. Effects of contact time and concentration on bactericidal efficacy of 3 disinfectants on hard nonporous surfaces.

    Science.gov (United States)

    Hong, Yingying; Teska, Peter J; Oliver, Haley F

    2017-11-01

    This study investigated the influence of contact time and concentration on bactericidal efficacy of 3 types of disinfectants (accelerated hydrogen peroxide [AHP], quaternary ammonium compounds [Quats], and sodium hypochlorite) on stainless steel surfaces using Environmental Protection Agency procedure MB-25-02. We found that bactericidal efficacy was not reduced at contact times or concentrations immediate lower than label use values, but all 3 disinfectants were significantly less bactericidal at significantly lower than label use contact times and concentrations. Overall, the bactericidal efficacy of the sodium hypochlorite disinfectant was most tolerant to the decreases of contact times and concentrations, followed closely by AHP disinfectant, and Quat disinfectant was most affected by contact time and concentration. Copyright © 2017 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

  1. Experimental and numerical modelling of surface water-groundwater flow and pollution interactions under tidal forcing

    Science.gov (United States)

    Spanoudaki, Katerina; Bockelmann-Evans, Bettina; Schaefer, Florian; Kampanis, Nikolaos; Nanou-Giannarou, Aikaterini; Stamou, Anastasios; Falconer, Roger

    2015-04-01

    continuous tide on the coastal side. The integrated surface water-groundwater numerical model IRENE (Spanoudaki et al., 2009, Spanoudaki, 2010) was also used in the study, with the numerical model predictions being compared with experimental results, which provide a valuable database for model calibration and validation. IRENE couples the 3D, non-steady state Navier-Stokes equations, after Reynolds averaging and with the assumption of hydrostatic pressure distribution, to the equations describing 3D saturated groundwater flow of constant density. The model uses the finite volume method with a cell-centered structured grid providing thus flexibility and accuracy in simulating irregular boundary geometries. A semi-implicit finite difference scheme is used to solve the surface water flow equations, while a fully implicit finite difference scheme is used for the groundwater equations. Pollution interactions are simulated by coupling the advection-diffusion equation describing the fate and transport of contaminants introduced in a 3D turbulent flow field to the partial differential equation describing the fate and transport of contaminants in 3D transient groundwater flow systems. References Ebrahimi, K., Falconer, R.A. and Lin B. (2007). Flow and solute fluxes in integrated wetland and coastal systems. Environmental Modelling and Software, 22 (9), 1337-1348. Hughes, S.A. (1995). Physical Modelling and Laboratory Techniques in Coastal Engineering. World Scientific Publishing Co. Pte. Ltd., Singapore. Kuan, W.K., Jin, G., Xin, P., Robinson, C. Gibbes, B. and Li. L. (2012). Tidal influence on seawater intrusion in unconfined coastal aquifers. Water Resources Research, 48 (2), doi:10.1029/2011WR010678. Spanoudaki, K., Stamou, A.I. and Nanou-Giannarou, A. (2009). Development and verification of a 3-D integrated surface water-groundwater model. Journal of Hydrology, 375 (3-4), 410-427. Spanoudaki, K. (2010). Integrated numerical modelling of surface water groundwater systems (in Greek

  2. Surface concentration nonuniformities resulting from chronoamperometry of a reversible reaction at an ultramicrodisk electrode

    DEFF Research Database (Denmark)

    Britz, Dieter H.; Strutwolf, Jörg

    2016-01-01

    The chronoamperometric experiment at a disk electrode was simulated, assuming a reversible reaction. When the diffusion coefficients of the two substances involved are different, there appears a surface concentration non- uniformity in the radial direction, exhibiting a maximum effect in time...

  3. Nocturnal intermittency in surface CO2 concentrations in sub-Saharan Africa

    Science.gov (United States)

    Data obtained over four adjacent fields of differing management practices in Zimbabwe illustrate the role of atmospheric intermittency as a mechanism for transferring CO2 between the surface and the atmosphere above. At night, limited atmospheric mixing permits CO2 concentrations to increase to leve...

  4. Morphological variations as nonstandard test parameters for the response to pollutant gas concentration: An application to Ruthenium Phthalocyanine sensing films

    International Nuclear Information System (INIS)

    Generosi, A.; Paci, B.; Albertini, V. Rossi; Perfetti, P.; Paoletti, A.M.; Pennesi, G.; Rossi, G.; Caminiti, R.

    2006-01-01

    A systematic time-resolved energy dispersive x-ray reflectometry study was performed in situ on Ruthenium Phthalocyanine thin fims to estimate the morphological detection limits of this material as NO 2 transducer and the influence of the gas concentration on the gas-film interaction mechanisms. The work validates the use of this unconventional method--based on the observation of the morphological parameters change--for evaluating the response of novel sensing materials in alternative to more standard procedures. Indeed, the morphological monitoring is shown to be sensitive to the gas concentration in a range comparable to the usual electroresistive measurements. Moreover, while the latter is only able to give the information on whether the gas is interacting with the sensor, the former is also able to discriminate among interaction processes of a different nature (in the present case the interaction limited to the film surface and the one involving the material bulk)

  5. Experimental Measurements of Concentration Fluctuations and Scales in a Dispersing Plume in the Atmospheric Surface Layer Obtained Using a Very Fast Response Concentration Detector

    Science.gov (United States)

    2016-06-14

    VOLUME 33 Experimental Measurements of Concentration Fluctuations and Scales in a Dispersing Plume in the Atmospheric Surface Layer Obtained Using a...Very Fast Response Concentration Detector EUGENE YEE Defence Research Establishment Suffield, Medicine Hat, Alberta , Canada R. CHAN AND P. R...various concentration timescales, length scales , and microscales (e.g., Taylor microscale, correlation scale , length scale based on the spectral

  6. Elemental concentration and potential ecological risk assessment of reef associated surface sediments of Appa Island, Gulf of Mannar Biosphere Reserve, Southeast coast of India.

    Science.gov (United States)

    Saravanan, P; Krishnakumar, S; Silva, Judith D; Pradhap, D; Vidyasakar, A; Radhakrishnan, K; Godson, Prince S; Arumugam, K; Magesh, N S

    2018-03-01

    Thirty three surface sediments were collected for the present study to assess the elemental concentration and its associated ecological risk in the reef associated surface sediments, Appa Island, Gulf of Mannar Biosphere Reserve, South east coast of India. The distribution of calcium carbonate in the reef sediments is controlled by coral debris and shell fragments whereas the Organic matter (OM) content are chiefly derived from mangroves and sea grasses. The circulation of trace elements and Fe, Mn are controlled by the fluvial process and re-suspended sediments. The concentration of Pb was primarily controlled by migration of pollutants through long shore sediment transport process. The main source of Pb in the study area is from coal incinerating power plants and coal handling operations from harbors. Copyright © 2018 Elsevier Ltd. All rights reserved.

  7. Organohalogen pollutants in surface particulates from workshop floors of four major e-waste recycling sites in China and implications for emission lists

    International Nuclear Information System (INIS)

    Zeng, Yan-Hong; Tang, Bin; Luo, Xiao-Jun; Zheng, Xiao-Bo; Peng, Ping-An; Mai, Bi-Xian

    2016-01-01

    To examine the environmental pollution associated with e-waste recycling activities, the concentrations of organohologenated pollutants (OHPs), i.e., short- and medium-chain chlorinated paraffins (SCCPs and MCCPs), polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs), and several other halogenated flame retardants (OHFRs), were investigated in surface particulates from the workshop floors of four major e-waste recycling sites (Taizhou, Guiyu, Dali and Qingyuan) in China. The mean levels of SCCPs, MCCPs, PCBs, PBDEs and OHFRs in surface particulates ranged from 30,000–61,000, 170,000–890,000, 2700–27,000, 52,000–240,000, and 62,000–140,000 ng/g dry weight (dw), respectively. OHFRs, including decabromodiphenyl ethane, dechlorane plus, 1,2-bis(2,4,6-tribromophenoxy)ethane, tetrabromobisphenol A, hexabromocyclododecanes, polybrominated biphenyls, hexabromobenzene, pentabromotoluene, and pentabromoethylbenzene, were frequently (> 50% detection frequency) detected in surface particulates with mean concentration ranges of 39,000–63,000, 310–2700, 98–16,000, 21,000–56,000, 55–5700, 1700–27,000, 42–1600, 3.2–220, and 5.8–12 ng/g dw, respectively. The composition of OHPs varied depend on the e-waste items processing in different regions. Guiyu and Dali were typical sites contaminated by halogenated flame retardants (HFRs) and CPs, respectively, while Qingyuan, and Taizhou were representative PCB-polluted regions. The evidence produced by this preliminary study indicated that electronic devices and plastics may account for the high content of HFRs and the metal products are likely the major source of CPs in these e-waste sites. - Highlights: • Report of characterizing the types and possible sources of OHPs in e-waste sites • Guiyu was a typical site contaminated by HFRs, while Dali was dominated by CPs. • Qingyuan and Taizhou were representative PCB-polluted regions. • Electronic devices and plastics may account for the

  8. Organohalogen pollutants in surface particulates from workshop floors of four major e-waste recycling sites in China and implications for emission lists

    Energy Technology Data Exchange (ETDEWEB)

    Zeng, Yan-Hong [State Key Laboratory of Organic Geochemistry and Guangdong Key Laboratory of Environmental Protection and Resources Utilization, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China); Tang, Bin [State Key Laboratory of Organic Geochemistry and Guangdong Key Laboratory of Environmental Protection and Resources Utilization, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China); Graduate University of Chinese Academy of Sciences, Beijing 100049 (China); Luo, Xiao-Jun [State Key Laboratory of Organic Geochemistry and Guangdong Key Laboratory of Environmental Protection and Resources Utilization, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China); Zheng, Xiao-Bo [College of Natural Resources and Environment, South China Agricultural University, Guangzhou 510642 (China); Peng, Ping-An [State Key Laboratory of Organic Geochemistry and Guangdong Key Laboratory of Environmental Protection and Resources Utilization, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China); Mai, Bi-Xian, E-mail: nancymai@gig.ac.cn [State Key Laboratory of Organic Geochemistry and Guangdong Key Laboratory of Environmental Protection and Resources Utilization, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China)

    2016-11-01

    To examine the environmental pollution associated with e-waste recycling activities, the concentrations of organohologenated pollutants (OHPs), i.e., short- and medium-chain chlorinated paraffins (SCCPs and MCCPs), polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs), and several other halogenated flame retardants (OHFRs), were investigated in surface particulates from the workshop floors of four major e-waste recycling sites (Taizhou, Guiyu, Dali and Qingyuan) in China. The mean levels of SCCPs, MCCPs, PCBs, PBDEs and OHFRs in surface particulates ranged from 30,000–61,000, 170,000–890,000, 2700–27,000, 52,000–240,000, and 62,000–140,000 ng/g dry weight (dw), respectively. OHFRs, including decabromodiphenyl ethane, dechlorane plus, 1,2-bis(2,4,6-tribromophenoxy)ethane, tetrabromobisphenol A, hexabromocyclododecanes, polybrominated biphenyls, hexabromobenzene, pentabromotoluene, and pentabromoethylbenzene, were frequently (> 50% detection frequency) detected in surface particulates with mean concentration ranges of 39,000–63,000, 310–2700, 98–16,000, 21,000–56,000, 55–5700, 1700–27,000, 42–1600, 3.2–220, and 5.8–12 ng/g dw, respectively. The composition of OHPs varied depend on the e-waste items processing in different regions. Guiyu and Dali were typical sites contaminated by halogenated flame retardants (HFRs) and CPs, respectively, while Qingyuan, and Taizhou were representative PCB-polluted regions. The evidence produced by this preliminary study indicated that electronic devices and plastics may account for the high content of HFRs and the metal products are likely the major source of CPs in these e-waste sites. - Highlights: • Report of characterizing the types and possible sources of OHPs in e-waste sites • Guiyu was a typical site contaminated by HFRs, while Dali was dominated by CPs. • Qingyuan and Taizhou were representative PCB-polluted regions. • Electronic devices and plastics may account for the

  9. Chemical analysis and surface morphology of enamel following ozone application with different concentrations and exposure times

    Directory of Open Access Journals (Sweden)

    Iman I. Elsayad

    2011-04-01

    Full Text Available This study aimed to determine the effect of different ozone concentrations applied with different exposure times on the chemical composition and the surface morphology of enamel. Twenty human mandibular molars were divided into four groups according to ozone concentration and exposure times. Group A received 90 μg of ozone/ml oxygen for 1 min, group B received 90 μg of ozone/ml oxygen for 2 min, group C received 120 μg of ozone/ml oxygen for 1 min and group D received 120 μg of ozone/ml oxygen for 2 min. The ozone source was from a medical ozone generator equipped with a device to adjust the concentration. Buccal surfaces of teeth were tested before and after ozone application so that each tooth served as a control for itself, using Environmental Scanning Electron Microscope (ESEM connected to an Electron Dispersive Analytical X-ray (EDAX. Changes in calcium and phosphorus percentage levels were recorded and the Ca/P ratio was calculated. The values were statistically analyzed using the one-way ANOVA test with a level of significance set at P ⩽ 0.05. No statistical significant difference was found between the control and the tested groups in minerals content or ratio as P > 0.05. ESEM images showed enamel surface roughness with 2 min ozone exposure times. High ozone concentration with prolonged exposure time does not change the chemical composition of enamel. Applying ozone for 2 min alters the surface morphology of enamel causing variable degrees of roughness. Using high ozone concentrations with prolonged exposure times for caries reversal or prevention and for bleaching may be contraindicated if this changes the surface morphology of enamel.

  10. Modelled surface ozone over southern africa during the cross border air pollution impact assessment project

    CSIR Research Space (South Africa)

    Zunckel, M

    2006-07-01

    Full Text Available over southern Africa during the Cross Border Air Pollution Impact Assessment Project M. Zunckel a,*, A. Koosailee a,f, G. Yarwood b, G. Maure c, K. Venjonoka d, A.M. van Tienhoven a, L. Otter e a CSIR Environmentek, P.O. Box 17001, Congella 4013, Durban... the biogenic and anthropogenic emissions data. References Annegarn, H.J., Turner, C.R., Helas, G., Tosen, G.R., Rorich, R.P., 1996. Gaseous pollutants. In: Held, G., Gore, B.J., Surridge, A.D., Tosen, G.R., Turner, C.R., Walmsley, R.D. (Eds.), Air Pollution...

  11. Correlation between sub-micron surface roughness of iron oxide encrustations and trace element concentrations

    International Nuclear Information System (INIS)

    Fischer, Cornelius; Karius, Volker; Luettge, Andreas

    2009-01-01

    Iron oxide encrustations are formed on black slate surfaces during oxidative weathering of iron sulfide and phosphate bearing, organic matter-rich slates. Synchronously, trace elements are released during ongoing weathering. Laser ablation ICP-MS analyses of a weathered and encrusted slate showed that major portions of the V, Cu, As, Mo, Pb, Th, and U reside in the encrustation. Recently a potential relationship between several micrometer to 500 nm surface topography roughness of such encrustations and its uranium concentration was shown. Based on laser scanning microscopy measurements, the present study shows that this interrelation must be expanded to small submicron-sized half-pores with diameters between 100 nm and 500 nm. We demonstrate that the relationship is not limited to topography variations of a single encrustation in the hand-specimen scale. Surface topography and geochemical analyses of iron oxide encrustations from several locations but from the same geochemical environment and with similar weathering history showed that the concentrations of U, P, Cu, and Zn correlate inversely with the surface roughness parameter F. This parameter represents the total surface area and is - in this case - a proxy for the root-mean square surface roughness Rq. This study substantiates the environmental importance that micrometer- to submicrometer topography variations of fluid-rock interfaces govern the trapping of trace elements.

  12. Correlation between sub-micron surface roughness of iron oxide encrustations and trace element concentrations

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, Cornelius, E-mail: cornelius@rice.edu [Department of Earth Science, MS-126, Rice University, 6100 Main Street, Houston, TX 77005 (United States); Geowissenschaftliches Zentrum der Universitaet Goettingen, Abt. Sedimentologie and Umweltgeologie, Goldschmidtstr. 3, D-37077 Goettingen (Germany); Karius, Volker [Geowissenschaftliches Zentrum der Universitaet Goettingen, Abt. Sedimentologie and Umweltgeologie, Goldschmidtstr. 3, D-37077 Goettingen (Germany); Luettge, Andreas [Department of Earth Science, MS-126, Rice University, 6100 Main Street, Houston, TX 77005 (United States); Department of Chemistry, Rice University, 6100 Main Street, Houston, TX 77005 (United States)

    2009-08-01

    Iron oxide encrustations are formed on black slate surfaces during oxidative weathering of iron sulfide and phosphate bearing, organic matter-rich slates. Synchronously, trace elements are released during ongoing weathering. Laser ablation ICP-MS analyses of a weathered and encrusted slate showed that major portions of the V, Cu, As, Mo, Pb, Th, and U reside in the encrustation. Recently a potential relationship between several micrometer to 500 nm surface topography roughness of such encrustations and its uranium concentration was shown. Based on laser scanning microscopy measurements, the present study shows that this interrelation must be expanded to small submicron-sized half-pores with diameters between 100 nm and 500 nm. We demonstrate that the relationship is not limited to topography variations of a single encrustation in the hand-specimen scale. Surface topography and geochemical analyses of iron oxide encrustations from several locations but from the same geochemical environment and with similar weathering history showed that the concentrations of U, P, Cu, and Zn correlate inversely with the surface roughness parameter F. This parameter represents the total surface area and is - in this case - a proxy for the root-mean square surface roughness Rq. This study substantiates the environmental importance that micrometer- to submicrometer topography variations of fluid-rock interfaces govern the trapping of trace elements.

  13. Pollution patterns and underlying relationships of benzophenone-type UV-filters in wastewater treatment plants and their receiving surface water.

    Science.gov (United States)

    Wu, Ming-Hong; Li, Jian; Xu, Gang; Ma, Luo-Dan; Li, Jia-Jun; Li, Jin-Song; Tang, Liang

    2018-05-15

    The environmental behaviors of emerging pollutants, benzophenone-type UV filters (BP-UV filters) and their derivatives were investigated in four wastewater treatment plants (WWTPs), and their receiving surface waters in Shanghai. The concentration level of selected BP-UV filters in the WWTPs was detected from ngL -1 to μgL -1 . BP (621-951ngL -1 ) and BP-3 (841-1.32 × 10 3 ngL -1 ) were the most abundant and highest detection frequency individuals among the target BP-UV filters in influents, whereas BP (198-400ngL -1 ), BP-4 (93.3-288ngL -1 ) and BP-3 (146-258ngL -1 ) were predominant in effluents. BP-UV filters cannot be completely removed and the total removal efficiency varied widely (-456% to 100%) during the treatment process. It can be inferred that the usage of BP and BP-3 are higher than other BP-UV filters in the study area. The lowest and highest levels were BP-2 (ND-7.66ngL -1 ) and BP-3 (68.5-5.01 × 10 3 ng L -1 ) in the receiving surface water, respectively. Interestingly, the seasonal variation of BP-3 is larger than those of other BP-UV filters in surface water from Shanghai. There is no obvious pollution pattern of BP-UV filters in the surface water from the cosmetic factory area. The correlation analysis of BP-UV filters between WWTPs effluents and nearby downstream water samples suggested that BP-UV filters emitted from some WWTPs might be the main source of receiving surface water. Preliminary risk assessment indicated that the levels of BP-UV filters detected by the effluent posed medium to high risk to fish as well as other aquatic organisms. Copyright © 2018 Elsevier Inc. All rights reserved.

  14. Variability of pesticides and nitrates concentrations along a river transect: chemical and isotopic evidence of groundwater - surface water interconnections

    Science.gov (United States)

    Baran, Nicole; Petelet-Giraud, Emmanuelle; Saplairoles, Maritxu

    2015-04-01

    Groundwater quality is increasingly monitored in Europe where various levels of nitrate and pesticide and/or metabolite contamination have been demonstrated (Loos et al., 2010, Stuart et al., 2012). The Groundwater Daughter Directive (2006/118/EC) to Water Framework Directive (WFD) particularly requires measures to prevent or limit inputs of pollutants into groundwater and compliance with good chemical status criteria (based on EU standards of nitrate and pesticides). The WFD mentioned the need to protect groundwater but also to have a particular regard to its impact and interrelationship with associated surface waters and directly dependent terrestrial Ecosystems. The Ariège river basin (SW France - 538 km²) is an alluvial plain under high agricultural pressure leading to a contamination of the aquifer by several pesticides and metabolites (Amalric et al., 2013). The Crieu is an allochtone river, crossing the plain (~ 10 km length) before joining the Ariège River. The Crieu is often dry in its middle section suggesting water leakage from surface water towards groundwater. At the opposite, the permanent flow observed downstream suggests an input of groundwater into surface water. In May 2014, while the Crieu flow was continuous through the plain, 7 river samples were collected and analyzed for pesticides, major ions, strontium concentration and isotopes. In situ measurements of electric conductivity were also performed as well as flow gauging. Two groundwaters close to the river were also sampled. The flow gauging measurements show a decreasing river discharge in the central area of the Crieu River, suggesting surface water leakage towards groundwater. Nevertheless, the electric conductivity increases along the river flow as well as some pesticides and nitrates concentrations. This chemical evolution of the river water is thus inconsistent with a simple water infiltration and another source of dissolved solutes is required to explain the increased of

  15. Effect of temperature and concentration on the surface tension of chia seed mucilage

    Science.gov (United States)

    Fu, Yuting; Arye, Gilboa

    2017-04-01

    The production of mucilage by the seed coat during hydration is a common adaptation of many different plant species. The mucilage may play many ecological roles in adaptation and seed germination in diverse environments, especially in extreme desert conditions. The major compound of the seed mucilage is polysaccharides (e.g. pectins and hemicelluloses), which makes it highly hydrophilic. Consequently, it can hydrate quickly in the presence of water; forming a gel like coating surrounding the seed. However, the seed mucilage also reported to contain small amounts of protein and lipid which may exhibit surface activity at the water-air interface. As a result, decay in the surface tension of water can be occur and consequently a reduction in soil capillary pressure. This in turn may affect the water retention and transport during seed germination. The physical properties of the seeds mucilage have been studied mainly in conjunction with its rheological properties. To the best of our knowledge, its surface activity at the water-air interface has been reported mainly in the realms of food engineering, using a robust method of extraction. The main objective of this study was to quantify the effect of temperature and concentration on the surface tension of seed mucilage. The mucilage in this study was extracted from chia (Salvia hispanica L.) seeds, using distilled water (1:20 w/w) by shaking for 12 h at 4°C. The extracts were freeze dried after centrifuge (5000rpm for 20min). Fresh samples of different concentrations, ranging from 0.5 to 6 mg/ml, were prepared before each surface tension measurements. The equilibrium surface tension was measured by the Wilhelmy plate method using a tensiometer (DCAT 11, Data Physics) with temperature control unit. For a given mucilage concentration, surface tension measurements carried out at 5, 15, 25, 35, 45 °C. The quantitative and thermodynamic analysis of the results will be presented and discussed.

  16. Differences in surface roughness of nanohybrid composites immersed in varying concentrations of citric acid

    Directory of Open Access Journals (Sweden)

    Gabriela Kevina Alifen

    2017-06-01

    Full Text Available Background: The surface roughness of restoration is important in predicting the length of time it might remain in the mouth. Conditions within the oral cavity can affect the surface roughness of a restoration. Nanohybrid composite is widely used in dentistry because it can be applied to restore anterior and posterior teeth. Athletes routinely consume isotonic drinks which are acidic and even more erosive than the carbonated variety because they contain a range of acids; the highest content of which being citric acid. Purpose: The aim of the study was to analyze the surface roughness of nanohybrid composite after having been subjected to immersion in varying concentrations of citric acid. Methods: Two isotonic drinks (Pocari Sweat and Mizone were analyzed using high performance liquid chromatography (HPLC to quantify the respective concentrations of citric acid which they contained. A total of 27 samples of cylindrical nanohybrid composite were prepared before being divided into three groups. In Group 1, samples were immersed in citric acid solution derived from Pocari Sweat. Those of Group 2 were immersed in citric acid solution derived from Mizone; while Group 3, samples were immersed in distilled water as a control. All samples were immersed for 7 days, before their surface roughness was tested by means of a surface roughness tester (Mitutoyo SJ-201. Data was analyzed using a one-way ANOVA test. Results: The results showed that there was no significant difference in surface roughness between Groups 1, 2 and 3 (p=0.985. Conclusion: No difference in surface roughness of nanohybrid composites results from prolonged immersion in varying concentrations of citric acid.

  17. A study on the atmospheric concentrations of primary and secondary air pollutants in the Athens basin performed by DOAS and DIAL measuring techniques.

    Science.gov (United States)

    Kalabokas, P D; Papayannis, A D; Tsaknakis, G; Ziomas, I

    2012-01-01

    In this work an analysis of continuous Differential Optical Absorption Spectroscopy (DOAS) measurements of primary and secondary air pollutants (SO(2), NO(2) and O(3)) in the Athens basin is performed combined with Differential Absorption Lidar (DIAL) vertical ozone measurements obtained inside the Planetary Boundary Layer (PBL) and the lower free troposphere. The measurements took place during the period May 2005-February 2007, at the National Technical University of Athens Campus (200 m above sea level (asl.), 37.96 °N, 23.78 °E). The SO(2) and NO(2) DOAS measurements showed maximum 1-hour mean values (around 20 μg/m(3) and 74 μg/m(3), respectively) in winter and did not exceed the current European Union (EU) air quality standards (European Council Directive 2008/50/EC), in contrast to ozone, which shows its maximum (around 128 μg/m(3)) in summer and frequently exceeds the EU standard for human health protection (120 μg/m(3)). If the measurements are classified according to the two most frequent flow-patterns of the air masses in the Athens basin (northern-southern circulation), it is observed that in general the atmospheric concentrations of all measured pollutants including ozone are higher when the southern circulation occurs, in comparison to the corresponding values under the northern circulation. The vertical ozone profiles obtained by DIAL were also higher under the southern circulation. During the summer months a mean difference (between the southern-northern circulations) of the order of 15-20 μg/m(3), maximized at the 0.9-1.1 km and 1.7-1.8 km height, was observed within the PBL. It was also observed that the summer surface ozone levels remained relatively high (around 80-110 μg/m(3)) even during strong northerly winds, verifying the high levels of rural surface ozone in the surrounding area reported by previous studies. Copyright © 2011 Elsevier B.V. All rights reserved.

  18. Measurement of the pollutants on the surface of crystal slice using PIXE

    CERN Document Server

    Zhu Guang Hua; Wang Xin Fu; Zhou Hong Yu

    2001-01-01

    The analytical sensitivity and detection limit and the applications of the PIXE technique or the samples of crystal slice are presented. The crystal slices implanted with oxygen ions at different implantation machines are polluted with element Cr, Mn, Fe, Cu etc. during oxygen ion implantation. These results show that PIXE method has high sensitivity and is non-destructive for measuring pollutants, and is suitable in this research field

  19. Solving widespread low-concentration VOC air pollution problems: Gas-phase photocatalytic oxidation answers the needs of many small businesses

    Energy Technology Data Exchange (ETDEWEB)

    Lyons, C; Turchi, C; Gratson, D

    1995-04-01

    Many small businesses are facing new regulations under the 1990 Amendments to the Clean Air Act. Regulators, as well as the businesses themselves, face new challenges to control small point-source air pollution emissions. An individual business-such as a dry cleaner, auto repair shop, bakery, coffee roaster, photo print shop, or chemical company-may be an insignificant source of air pollution, but collectively, the industry becomes a noticeable source. Often the businesses are not equipped to respond to new regulatory requirements because of limited resources, experience, and expertise. Also, existing control strategies may be inappropriate for these businesses, having been developed for major industries with high volumes, high pollutant concentrations, and substantial corporate resources. Gas-phase photocatalytic oxidation (PCO) is an option for eliminating low-concentration, low-flow-rate emissions of volatile organic compounds (VOCs) from small business point sources. The advantages PCO has over other treatment techniques are presented in this paper. This paper also describes how PCO can be applied to specific air pollution problems. We present our methodology for identifying pollution problems for which PCO is applicable and for reaching the technology`s potential end users. PCO is compared to other gas-phase VOC control technologies.

  20. Negligible Impact of Ingested Microplastics on Tissue Concentrations of Persistent Organic Pollutants in Northern Fulmars off Coastal Norway

    NARCIS (Netherlands)

    Herzke, D.; Anker-Nilssen, T.; Haughdahl, T.; Nøst, T.; Götsch, A.; Christensen-Dalsgaard, S.; Langset, M.; Fangel, K.; Koelmans, A.A.

    2016-01-01

    The northern fulmar (Fulmarus glacialis) is defined as an indicator species of plastic pollution by the Oslo-Paris Convention for the North-East Atlantic, but few data exist for fulmars from Norway. Moreover, the relationship between uptake of plastic and pollutants in seabirds is poorly understood.

  1. Muscle conduction velocity, surface electromyography variables, and echo intensity during concentric and eccentric fatigue.

    Science.gov (United States)

    Gonzalez-Izal, Miriam; Lusa Cadore, Eduardo; Izquierdo, Mikel

    2014-03-01

    Concentric (CON) and eccentric (ECC) contractions may involve different mechanisms related to changes in sarcolemma status and the consequent alteration of action potential transmission along muscle fibers. Muscle conduction velocity (CV), surface electromyography signal (sEMG), muscle quality, and blood lactate concentrations were analyzed during CON and ECC actions. Compared with ECC, the CON protocol resulted in greater muscle force losses, blood lactate concentrations, and changes in sEMG parameters. Similar reductions in CV were detected in both protocols. Higher echo intensity values were observed 2 days after ECC due to greater muscle damage. The effects of the muscle damage produced by ECC exercise on the transmission of action potentials along muscle fibers (measured as the CV) may be comparable with the effects of hydrogen accumulation produced by CON exercise (related to greater lactate concentrations), which causes greater force loss and change in other sEMG variables during CON than during ECC actions.

  2. The influence of surface roughness and solution concentration on pool boiling process in Diethanolamine aqueous solution

    Science.gov (United States)

    Khoshechin, Mohsen; Salimi, Farhad; Jahangiri, Alireza

    2018-04-01

    In this research, the effect of surface roughness and concentration of solution on bubble departing frequency and nucleation site density for pool boiling of water/diethanolamine (DEA) binary solution were investigated experimentally. In this investigation, boiling heat transfer coefficient, bubble departing frequency and nucleation site density have been experimentally investigated in various concentrations and heat fluxes. Microstructured surfaces with a wide range of well-defined surface roughness were fabricated, and a heat flux between 1.5-86 kW/m2 was achieved under atmospheric conditions. The Results indicated that surface roughness and concentration of solution increase the bubble departing frequency and nucleation site density with increasing heat flux. The boiling heat transfer coefficient in mixtures of water/DEA increases with increasing concentration of DEA in water. The experimental results were compared with predictions of several used correlations in the literatures. Results showed that the boiling heat transfer coefficients of this case study are much higher than the predicted values by major existing correlations and models. The excellent agreement for bubble departing frequency found between the models of Jackob and Fritz (1966) and experimental data and also the nucleation site density were in close agreement with the model of Paul (1983) data. f bubble departure frequency, 1/s or Hz N Number of nucleation sites per area per time R c Minimum cavity size, m D c critical diameter, m g gravitational acceleration, m/s2 ρ density, kg/m3 T temperature, °c ΔT temperature difference, °c d d vapor bubble diameter, m h fg enthalpy of vaporization, J/kg R Roughness, μm Ja Jakob number cp specific heat, J/kg °c Pr Prandtl number Ar Archimedes number h Heat transfer coefficient, J/(m2 °c) tg time it takes to grow a bubble, s q/A heat flux (kW/m2) tw time required to heat the layer, s gc Correction coefficient of incompatible units R a Surface

  3. Modification of sea surface temperature by chlorophyll concentration in the Atlantic upwelling systems

    Science.gov (United States)

    Hernandez, O.; Jouanno, J.; Echevin, V.; Aumont, O.

    2017-07-01

    The influence of the chlorophyll on the upper Tropical Atlantic Ocean is investigated with long-term (1979-2012) regional oceanic simulations with 1/4° horizontal resolution based on the NEMO3.6 model. The model solar radiation penetration scheme depends on the chlorophyll concentration. Simulations with time and spatially varying concentrations obtained from satellite ocean color observations are compared with a simulation forced with constant chlorophyll concentration of 0.05 mg m-3, representative of chlorophyll depleted waters. Results indicate that regions of the Tropical Atlantic with chlorophyll concentrations larger than in the reference simulation (i.e., [chl] > 0.05 mg m-3) get warmer at the surface, with the exception of the main upwelling regions where high chlorophyll concentrations are associated with a significant cooling of the sea surface (˜1°C in the Benguela upwelling). The analysis of the model heat balance shows that the biological differential heating causes negative temperature anomalies in subsurface source waters prior to their upwelling at the coast. The shallow mixed-layer in the eastern equatorial and tropical Atlantic favors the persistence of these subsurface anomalies and may explain why the Benguela is particularly sensitive to the biological differential heating. In spite of the presence of high chlorophyll concentrations in the upwelling regions, both the larger amount of shortwave radiation captured in the surface layers and the modifications of the horizontal and vertical advection at the coast are found to play a secondary role in the SST change in the upwelling region.

  4. The effect of some soil characteristics on soil radon concentration and radon exhalation from soil surface

    International Nuclear Information System (INIS)

    Sun, Kainan; Cheng, Jianping; Guo, Qiuju

    2004-01-01

    To find out the impacts of soil characters on radon concentration in soil and radon exhalation from soil, field measurements on soil radon concentrations (60 cm under the soil surface) and radon exhalation rate from soil surface were carried out in totally 31 points with different types of soil in three cities in both South and North China. Soil radium contents, water contents, soil porosity and grain size were concretely analyzed in our laboratory. The linear simulation was used to analyze the above data. The results showed that radon exhalation rate from soil and radon concentrations in soil have direct proportion to soil radium contents. Rather high radium content and radon exhalation rate were measured in Guiyang area, 67±28Bq/Kg and 40±59 mBq/m 2 ·s, however no high soil radon concentration was found due to the difficulties in the measurements on clay soils with high saturation. Compared with soil radium contents, radon exhalation rate from soil and soil radon concentrations are more easily impacted by soil characters and change in a rather large range. (author)

  5. Analysis of Relative Concentration of Ethanol and Other Odorous Compounds (OCs) Emitted from the Working Surface at a Landfill in China

    Science.gov (United States)

    Li, Dong; Lu, Wenjing; Liu, Yanjun; Guo, Hanwen; Xu, Sai; Ming, Zhongyuan; Wang, Hongtao

    2015-01-01

    Estimating odor emissions from landfill sites is a complicated task because of the various chemical and biological species that exist in landfill gases. In this study, the relative concentration of ethanol and other odorous compounds emitted from the working surface at a landfill in China was analyzed. Gas sampling was conducted at the landfill on a number of selected days from March 2012 to March 2014, which represented different periods throughout the two years. A total of 41, 59, 66, 54, 63, 54, 41, and 42 species of odorous compounds were identified and quantified in eight sampling activities, respectively; a number of 86 species of odorous compounds were identified and quantified all together in the study. The measured odorous compounds were classified into six different categories (Oxygenated compounds, Halogenated compounds, Terpenes, Sulfur compounds, Aromatics, and Hydrocarbons). The total average concentrations of the oxygenated compounds, sulfur compounds, aromatics, halogenated compounds, hydrocarbons, and terpenes were 2.450 mg/m3, 0.246 mg/m3, 0.203 mg/m3, 0.319 mg/m3, 0.530 mg/m3, and 0.217 mg/m3, respectively. The relative concentrations of 59 odorous compounds with respect to the concentration of ethyl alcohol (1000 ppm) were determined. The dominant contaminants that cause odor pollution around the landfill are ethyl sulfide, methyl mercaptan, acetaldehyde, and hydrogen sulfide; dimethyl disulfide and dimethyl sulfide also contribute to the pollution to a certain degree. PMID:25769100

  6. Macromodel for assessing residential concentrations of combustion-generated pollutants: Model development and preliminary predictions for CO, NO/sub 2/, and respirable suspended particles

    Energy Technology Data Exchange (ETDEWEB)

    Traynor, G.W.; Aceti, J.C.; Apte, M.G.; Smith, B.V.; Green, L.L.; Smith-Reiser, A.; Novak, K.M.; Moses, D.O.

    1989-01-01

    A simulation model (also called a ''macromodel'') has been developed to predict residential air pollutant concentration distributions for specified populations. The model inputs include the market penetration of pollution sources, pollution source characteristics (e.g., emission rates, source usage rates), building characteristics (e.g., house volume, air exchange rates), and meteorological parameters (e.g., outside temperature). Four geographically distinct regions of the US have been modeled using Monte Carlo and deterministic simulation techniques. Single-source simulations were also conducted. The highest predicted CO and NO/sub 2/ residential concentrations were associated with the winter-time use of unvented gas and kerosene space heaters. The highest predicted respirable suspended particulate concentrations were associated with indoor cigarette smoking and the winter-time use of non-airtight wood stoves, radiant kerosene heaters, convective unvented gas space heaters, and oil forced-air furnaces. Future field studies in this area should (1) fill information gaps identified in this report, and (2) collect information on the macromodel input parameters to properly interpret the results. It is almost more important to measure the parameters that affect indoor concentration than it is to measure the concentrations themselves.

  7. Risk of a false decision on conformity of an environmental compartment due to measurement uncertainty of concentrations of two or more pollutants.

    Science.gov (United States)

    Pennecchi, Francesca R; Kuselman, Ilya; da Silva, Ricardo J N B; Hibbert, D Brynn

    2018-03-12

    Risks of false decisions in conformity assessment of an environmental compartment due to measurement uncertainty of concentrations of two or more pollutants are discussed. Even if the assessment of conformity for each pollutant in the compartment is successful, the total probability of a false decision concerning the compartment as a whole might still be significant. A model of the total probability of a false decision, formulated on the base of the law of total probability, is used, for example, for a study of test results of total suspended particulate matter (TSPM) concentration in ambient air near to three independent stone quarries located in Israel, as the sources of the air pollution. Total probabilities of underestimation of TSPM concentration (total risk of the inhabitants) and overestimation (total risk of the stone producers) are evaluated as a combination of the particular risks of air conformity assessment concerning TSPM concentration for each quarry. These probabilities characterize conformity of the TSPM concentration in the region of the quarries as a whole. Core code developed in R programming environment for the calculations is provided. Copyright © 2018 Elsevier Ltd. All rights reserved.

  8. A Statistical Analysis of the Relationship between Brown Haze and Surface Air Pollution Levels on Respiratory Hospital Admissions in Auckland, New Zealand

    Directory of Open Access Journals (Sweden)

    Kim Natasha Dirks

    2017-11-01

    Full Text Available Eleven years of hospital admissions data for Auckland, New Zealand for respiratory conditions are analyzed using a Poisson regression modelling approach, incorporating a spline function to represent time, based on a detailed record of haze events and surface air pollution levels over an eleven-year period, taking into account the daily average temperature and humidity, the day of the week, holidays and trends over time. NO2 was the only pollutant to show a statistically significant increase (p = 0.009 on the day of the haze event for the general population. Ambient concentrations of CO, NO and NO2 were significantly associated with admissions with an 11-day lag period for the 0–14 year age group and a 5–7 day lag period for the 65+ year age group. A 3-day lag period was found for the 15–64 year age group for CO, NO and PM10. Finally, the incidence of brown haze was linked to significant increases in hospital admissions. A lag period of 5 days was recorded between haze and subsequent increases in admissions for the 0–14 year age group and the 65+ group and an 11-day lag for the 15–64 year age group. The results provide the first statistical link between Auckland brown haze events, surface air pollution and respiratory health. Medical institutions and practitioners could benefit from improved capacity to predict Auckland’s brown haze events in order prepare for the likely increases in respiratory admissions over the days ahead.

  9. Characterization of Missouri surface waters near point sources of pollution reveals potential novel atmospheric route of exposure for bisphenol A and wastewater hormonal activity pattern

    Science.gov (United States)

    Kassotis, Christopher D.; Alvarez, David A.; Taylor, Julia A.; vom Saal, Frederick S.; Nagel, Susan C.; Tillitt, Donald E.

    2015-01-01

    Surface water contamination by chemical pollutants increasingly threatens water quality around the world. Among the many contaminants found in surface water, there is growing concern regarding endocrine disrupting chemicals, based on their ability to interfere with some aspect of hormone action in exposed organisms, including humans. This study assessed water quality at several sites across Missouri (near wastewater treatment plants and airborne release sites of bisphenol A) based on hormone receptor activation potencies and chemical concentrationspresent in the surface water. We hypothesized that bisphenol A and ethinylestradiol would be greater in water near permitted airborne release sites and wastewater treatment plant inputs, respectively, and that these two compounds would be responsible for the majority of activities in receptor-based assays conducted with water collected near these sites. Concentrations of bisphenol A and ethinylestradiol were compared to observed receptor activities using authentic standards to assess contribution to total activities, and quantitation of a comprehensive set of wastewater compounds was performed to better characterize each site. Bisphenol A concentrations were found to be elevated in surface water near permitted airborne release sites, raising questions that airborne releases of BPA may influence nearby surface water contamination and may represent a previously underestimated source to the environment and potential for human exposure. Estrogen and androgen receptor activities of surface water samples were predictive of wastewater input, although the lower sensitivity of the ethinylestradiol ELISA relative to the very high sensitivity of the bioassay approaches did not allow a direct comparison. Wastewater-influenced sites also had elevated anti-estrogenic and anti-androgenic equivalence, while sites without wastewater discharges exhibited no antagonist activities.

  10. Calculation of the Arc Velocity Along the Polluted Surface of Short Glass Plates Considering the Air Effect

    Directory of Open Access Journals (Sweden)

    Tao Yuan

    2012-03-01

    Full Text Available To investigate the microphysics mechanism and the factors that influence arc development along a polluted surface, the arc was considered as a plasma fluid. Based on the image method and the collision ionization theory, the electric field of the arc needed to maintain movement with different degrees of pollution was calculated. According to the force of the charged particle in an arc plasma stressed under an electric field, a calculation model of arc velocity, which is dependent on the electric field of the arc head that incorporated the effects of airflow around the electrode and air resistance is presented. An experiment was carried out to measure the arc velocity, which was then compared with the calculated value. The results of the experiment indicated that the lighter the pollution is, the larger the electric field of the arc head and arc velocity is; when the pollution is heavy, the effect of thermal buoyancy that hinders arc movement increases, which greatly reduces the arc velocity.

  11. The effect of hydraulic retention time on the removal of pollutants from sewage treatment plant effluent in a surface-flow wetland system

    NARCIS (Netherlands)

    Toet, Sylvia; Van Logtestijn, R. S P; Kampf, Ruud; Schreijer, Michiel; Verhoeven, J. T A

    We evaluated the effect of four hydraulic retention times (HRT, 0.3, 0.8, 2.3, and 9.3 days) on pollutant removal in a surface-flow wetland system for polishing tertiary effluent from a sewage treatment plant (STP). The removal efficiency of pollutants at these HRTs was based on mass budgets of the

  12. Spatial Gradients in Trace Metal Concentrations in the Surface Microlayer of the Mediterranean Sea

    Directory of Open Access Journals (Sweden)

    Antonio eTovar-Sanchez

    2014-12-01

    Full Text Available The relationship between dust deposition and surface water metal concentrations is poorly understood. Dissolution, solubility, and partitioning reactions of trace metals from dust particles are governed by complex chemical, biological, and physical processes occurring in the surface ocean. Despite that, the role of the sea surface microlayer (SML, a thin, but fundamental component modulating the air-sea exchange of materials has not been properly evaluated. Our study revealed that the SML of the Mediterranean Sea is enriched with bioactive trace metals (i.e., Cd, Co, Cu and Fe, ranging from 8 (for Cd to 1000 (for Fe times higher than the dissolved metal pool in the underlying water column. The highest enrichments were spatially correlated with the atmospheric deposition of mineral particles. Our mass balance results suggest that the SML in the Mediterranean Sea contains about 2 tonnes of Fe. However, we did not detect any trends between the concentrations of metals in SML with the subsurface water concentrations and biomass distributions. These findings suggest that future studies are needed to quantify the rate of metal exchange between the SML and the bioavailable pool and that the SML should be considered to better understand the effect of atmospheric inputs on the biogeochemistry of trace metals in the ocean.

  13. Impact of Donor Age, Gender and Handling Time on the DNA Concentration Left on Different Surfaces

    Directory of Open Access Journals (Sweden)

    Branka Gršković

    2014-09-01

    Full Text Available Background: We analyzed the correlation between several factors (donor age and gender, and handling time and trace DNA concentration that participants left on different surfaces (paper, plastic, plastic coated metal while holding items in their hands or rubbing them with their fingers, their palms, and the side of the palm of the dominant hand. Material and Methods: Sixty participants took part in the study. Items were swabbed with a moistened cotton swab. DNA was isolated using the Chelex procedure and quantified by real-time PCR. Results: We found that DNA concentration transferred to an item was independent of the handling time. On the contrary, it was dependent on the item’s texture; the greatest concentration was left on plastic coated metal (PCM and the least on paper. The greatest concentration of trace DNA was left by participants from 35 to 44 years of age. Results of the study showed that men deposit a higher DNA concentration than do women. Conclusion: Item texture, donor age, and gender influence trace DNA concentration. Further investigations are necessary to fully understand the process of DNA transfer from donors to handled items.

  14. Evaluation of surface water quality and pollution in Lepenica river basin

    Directory of Open Access Journals (Sweden)

    Milanović Ana

    2007-01-01

    Full Text Available Lepenica river basin is axis of economic and urban development of Šumadija region. However, because of disorderly water regime of Lepenica river and its tributaries, it appears several hydrologic problems on this territory, as example insufficiency of drinking and irrigating water by one cite, and floods and torrents (especially in Kragujevac valley by other cite. Particular problem is water quality and pollution in river basin. In this paper will be analyzed water quality of Lepenica river and artificial lakes, built in its river basin, according to the data of Republic Hydrometeorologic Institute of Serbia. Also, it will be present polluter cadastre in river basin.

  15. Concentration Dependences of the Surface Tension and Density of Solutions of Acetone-Ethanol-Water Systems at 293 K

    Science.gov (United States)

    Dadashev, R. Kh.; Dzhambulatov, R. S.; Mezhidov, V. Kh.; Elimkhanov, D. Z.

    2018-05-01

    Concentration dependences of the surface tension and density of solutions of three-component acetone-ethanol-water systems and the bounding binary systems at 273 K are studied. The molar volume, adsorption, and composition of surface layers are calculated. Experimental data and calculations show that three-component solutions are close to ideal ones. The surface tensions of these solutions are calculated using semi-empirical and theoretical equations. Theoretical equations qualitatively convey the concentration dependence of surface tension. A semi-empirical method based on the Köhler equation allows us to predict the concentration dependence of surface tension within the experimental error.

  16. Appraisal of heavy metal concentration in selected vegetables exposed to different degrees of pollution in Agra, India.

    Science.gov (United States)

    Kumar, Suruchi

    2013-03-01

    The accumulation of air-borne heavy metals in edible parts of vegetables in the chosen areas of the city of Agra, India was investigated. Agra, with a population of 1.7 million, is a medium-sized Indian city where leafy green vegetables are received generally from the surrounding areas of about 50 km radius. Vegetables Basella alba (spinch, locally called palak), Trigonella foenumgraecum (fenugreek, locally called methi), and Coriandrum sativum (coriander, locally called dhania) from the various sites of Agra, India were tested for Pb, Cd, Cr, Ni, and Zn by atomic absorption spectroscopy in washed and unwashed vegetable. The results obtained from this analysis revealed higher concentrations of toxic elements in unwashed samples than the washed samples. Among unwashed samples it was found that concentration of heavy metals is more in areas of busy traffic or industry density. The levels of lead in all samples were found above the maximum permissible limit recommended by PFA for metals in vegetables. The study concludes that transportation and storage systems during marketing play a significant role in determining the contamination and deposition of heavy metal on vegetable surfaces specially of the leafy variety.

  17. Tracing transfer processes of metal pollutants from soils to surface water using environmental magnetic techniques - results from Paris suburbia (France)

    Science.gov (United States)

    Franke, Christine; Lamy, Isabelle; van Oort, Folkert; Thiesson, Julien; Barsalini, Luca

    2015-04-01

    Major river systems in Europe are potential sinks for environmental pollutions and therefore reflect the consequences of European industrialization and urbanization. Surface water pollution is a major concern for the health of the population and its related ecosystems as well as for the water quality. Within the variety of different typical pollutants in a river watershed, the metallic fraction embraces many toxic/dangerous contaminants. Each of these elements comprises different sources and follows specific processes throughout its pathways from its origin to and within the river system. But the detection, estimation and follow up of the different contaminants is highly complex. Physico-chemical techniques such as environmental and rock magnetics are powerful complementary tools to traditional methods because they comprise the possibility to trace the entire metal fraction and do offer the possibility to perform spatio-temporal analyze campaigns directly in the field and on a relative high number of samples from both the river and the adjacent areas (suspended particular matter, soils, dust, sediments, etc). In this study, we took advantages of the recent results on the Seine river (France) that have shown the high potential of environmental magnetic methods to estimate the metal fraction in suspended particular matter samples, and to allow the discrimination of its natural detrital, biogenic or anthropogenic origin (see parallel EGU abstract of Kayvantash et al. in this session). We focused on a suburban agricultural area west of Paris (Pierrelaye-Bessancourt) adjacent to the Seine river, which suffers from a high accumulation of heavy metal pollutants caused by long-term historical irrigation with urban waste waters. For the time being, these heavy metals seem to be geochemically fixed in the surface layer mainly by the soil organic matter. Future land use planning, however, arises questions on the fate of these pollutants and their potential remobilization by

  18. Economic Estimation of the Losses Caused by Surface Water Pollution Accidents in China From the Perspective of Water Bodies' Functions.

    Science.gov (United States)

    Yao, Hong; You, Zhen; Liu, Bo

    2016-01-22

    The number of surface water pollution accidents (abbreviated as SWPAs) has increased substantially in China in recent years. Estimation of economic losses due to SWPAs has been one of the focuses in China and is mentioned many times in the Environmental Protection Law of China promulgated in 2014. From the perspective of water bodies' functions, pollution accident damages can be divided into eight types: damage to human health, water supply suspension, fishery, recreational functions, biological diversity, environmental property loss, the accident's origin and other indirect losses. In the valuation of damage to people's life, the procedure for compensation of traffic accidents in China was used. The functional replacement cost method was used in economic estimation of the losses due to water supply suspension and loss of water's recreational functions. Damage to biological diversity was estimated by recovery cost analysis and damage to environmental property losses were calculated using pollutant removal costs. As a case study, using the proposed calculation procedure the economic losses caused by the major Songhuajiang River pollution accident that happened in China in 2005 have been estimated at 2263 billion CNY. The estimated economic losses for real accidents can sometimes be influenced by social and political factors, such as data authenticity and accuracy. Besides, one or more aspects in the method might be overestimated, underrated or even ignored. The proposed procedure may be used by decision makers for the economic estimation of losses in SWPAs. Estimates of the economic losses of pollution accidents could help quantify potential costs associated with increased risk sources along lakes/rivers but more importantly, highlight the value of clean water to society as a whole.

  19. Economic Estimation of the Losses Caused by Surface Water Pollution Accidents in China From the Perspective of Water Bodies’ Functions

    Directory of Open Access Journals (Sweden)

    Hong Yao

    2016-01-01

    Full Text Available The number of surface water pollution accidents (abbreviated as SWPAs has increased substantially in China in recent years. Estimation of economic losses due to SWPAs has been one of the focuses in China and is mentioned many times in the Environmental Protection Law of China promulgated in 2014. From the perspective of water bodies’ functions, pollution accident damages can be divided into eight types: damage to human health, water supply suspension, fishery, recreational functions, biological diversity, environmental property loss, the accident’s origin and other indirect losses. In the valuation of damage to people’s life, the procedure for compensation of traffic accidents in China was used. The functional replacement cost method was used in economic estimation of the losses due to water supply suspension and loss of water’s recreational functions. Damage to biological diversity was estimated by recovery cost analysis and damage to environmental property losses were calculated using pollutant removal costs. As a case study, using the proposed calculation procedure the economic losses caused by the major Songhuajiang River pollution accident that happened in China in 2005 have been estimated at 2263 billion CNY. The estimated economic losses for real accidents can sometimes be influenced by social and political factors, such as data authenticity and accuracy. Besides, one or more aspects in the method might be overestimated, underrated or even ignored. The proposed procedure may be used by decision makers for the economic estimation of losses in SWPAs. Estimates of the economic losses of pollution accidents could help quantify potential costs associated with increased risk sources along lakes/rivers but more importantly, highlight the value of clean water to society as a whole.

  20. Economic Estimation of the Losses Caused by Surface Water Pollution Accidents in China From the Perspective of Water Bodies’ Functions

    Science.gov (United States)

    Yao, Hong; You, Zhen; Liu, Bo

    2016-01-01

    The number of surface water pollution accidents (abbreviated as SWPAs) has increased substantially in China in recent years. Estimation of economic losses due to SWPAs has been one of the focuses in China and is mentioned many times in the Environmental Protection Law of China promulgated in 2014. From the perspective of water bodies’ functions, pollution accident damages can be divided into eight types: damage to human health, water supply suspension, fishery, recreational functions, biological diversity, environmental property loss, the accident’s origin and other indirect losses. In the valuation of damage to people’s life, the procedure for compensation of traffic accidents in China was used. The functional replacement cost method was used in economic estimation of the losses due to water supply suspension and loss of water’s recreational functions. Damage to biological diversity was estimated by recovery cost analysis and damage to environmental property losses were calculated using pollutant removal costs. As a case study, using the proposed calculation procedure the economic losses caused by the major Songhuajiang River pollution accident that happened in China in 2005 have been estimated at 2263 billion CNY. The estimated economic losses for real accidents can sometimes be influenced by social and political factors, such as data authenticity and accuracy. Besides, one or more aspects in the method might be overestimated, underrated or even ignored. The proposed procedure may be used by decision makers for the economic estimation of losses in SWPAs. Estimates of the economic losses of pollution accidents could help quantify potential costs associated with increased risk sources along lakes/rivers but more importantly, highlight the value of clean water to society as a whole. PMID:26805869

  1. Semianalytical model predicting transfer of volatile pollutants from groundwater to the soil surface.

    Science.gov (United States)

    Atteia, Olivier; Höhener, Patrick

    2010-08-15

    Volatilization of toxic organic contaminants from groundwater to the soil surface is often considered an important pathway in risk analysis. Most of the risk models use simplified linear solutions that may overpredict the volatile flux. Although complex numerical models have been developed, their use is restricted to experienced users and for sites where field data are known in great detail. We present here a novel semianalytical model running on a spreadsheet that simulates the volatilization flux and vertical concentration profile in a soil based on the Van Genuchten functions. These widely used functions describe precisely the gas and water saturations and movement in the capillary fringe. The analytical model shows a good accuracy over several orders of magnitude when compared to a numerical model and laboratory data. The effect of barometric pumping is also included in the semianalytical formulation, although the model predicts that barometric pumping is often negligible. A sensitivity study predicts significant fluxes in sandy vadose zones and much smaller fluxes in other soils. Fluxes are linked to the dimensionless Henry's law constant H for H < 0.2 and increase by approximately 20% when temperature increases from 5 to 25 degrees C.

  2. Transpacific transport of ozone pollution and the effect of recent Asian emission increases on air quality in North America: an integrated analysis using satellite, aircraft, ozonesonde, and surface observations

    Directory of Open Access Journals (Sweden)

    L. Zhang

    2008-10-01

    Full Text Available We use an ensemble of aircraft, satellite, sonde, and surface observations for April–May 2006 (NASA/INTEX-B aircraft campaign to better understand the mechanisms for transpacific ozone pollution and its implications for North American air quality. The observations are interpreted with a global 3-D chemical transport model (GEOS-Chem. OMI NO2 satellite observations constrain Asian anthropogenic NOx emissions and indicate a factor of 2 increase from 2000 to 2006 in China. Satellite observations of CO from AIRS and TES indicate two major events of Asian transpacific pollution during INTEX-B. Correlation between TES CO and ozone observations shows evidence for transpacific ozone pollution. The semi-permanent Pacific High and Aleutian Low cause splitting of transpacific pollution plumes over the Northeast Pacific. The northern branch circulates around the Aleutian Low and has little impact on North America. The southern branch circulates around the Pacific High and some of that air impacts western North America. Both aircraft measurements and model results show sustained ozone production driven by peroxyacetylnitrate (PAN decomposition in the southern branch, roughly doubling the transpacific influence from ozone produced in the Asian boundary layer. Model simulation of ozone observations at Mt. Bachelor Observatory in Oregon (2.7 km altitude indicates a mean Asian ozone pollution contribution of 9±3 ppbv to the mean observed concentration of 54 ppbv, reflecting mostly an enhancement in background ozone rather than episodic Asian plumes. Asian pollution enhanced surface ozone concentrations by 5–7 ppbv over western North America in spring 2006. The 2000–2006 rise in Asian anthropogenic emissions increased this influence by 1–2 ppbv.

  3. Optimization of artificial neural network models through genetic algorithms for surface ozone concentration forecasting.

    Science.gov (United States)

    Pires, J C M; Gonçalves, B; Azevedo, F G; Carneiro, A P; Rego, N; Assembleia, A J B; Lima, J F B; Silva, P A; Alves, C; Martins, F G

    2012-09-01

    This study proposes three methodologies to define artificial neural network models through genetic algorithms (GAs) to predict the next-day hourly average surface ozone (O(3)) concentrations. GAs were applied to define the activation function in hidden layer and the number of hidden neurons. Two of the methodologies define threshold models, which assume that the behaviour of the dependent variable (O(3) concentrations) changes when it enters in a different regime (two and four regimes were considered in this study). The change from one regime to another depends on a specific value (threshold value) of an explanatory variable (threshold variable), which is also defined by GAs. The predictor variables were the hourly average concentrations of carbon monoxide (CO), nitrogen oxide, nitrogen dioxide (NO(2)), and O(3) (recorded in the previous day at an urban site with traffic influence) and also meteorological data (hourly averages of temperature, solar radiation, relative humidity and wind speed). The study was performed for the period from May to August 2004. Several models were achieved and only the best model of each methodology was analysed. In threshold models, the variables selected by GAs to define the O(3) regimes were temperature, CO and NO(2) concentrations, due to their importance in O(3) chemistry in an urban atmosphere. In the prediction of O(3) concentrations, the threshold model that considers two regimes was the one that fitted the data most efficiently.

  4. Determination of particle concentration rankings by spatial mapping of particle surface area, number, and mass concentrations in a restaurant and a die casting plant.

    Science.gov (United States)

    Park, Ji Young; Ramachandran, Gurumurthy; Raynor, Peter C; Olson, Gregory M

    2010-08-01

    Measurements using several exposure metrics were carried out in a restaurant and a die casting plant to compare the spatial distributions of particle surface area (SA), number, and mass concentrations and rank exposures in different areas by those metrics. The different exposure metrics for incidental nanoparticle and fine particle exposures were compared using the concentration rankings, statistical differences between areas, and concentration ratios between different areas. In the die casting plant, area concentration rankings and spatial distributions differed by the exposure metrics chosen. Surface area and fine particle number concentrations were greatest near incidental nanoparticle sources and were significantly different between three areas. However, mass and coarse particle number concentrations were similar throughout the facility, and rankings of the work areas based on these metrics were different from those of SA and fine number concentrations. In the restaurant, concentrations in the kitchen for all metrics except respirable mass concentration were significantly greater than in the serving area, although SA and fine particle number concentrations showed larger differences between the two areas than either the mass or coarse particle number concentrations. Thus, the choice of appropriate exposure metric has significant implications for exposure groupings in epidemiologic and occupational exposure studies.

  5. Study of heavy metal concentration and partitioning in the Estrela River: implications for the pollution in Guanabara Bay - SE Brazil

    Directory of Open Access Journals (Sweden)

    Carlos M. A. Rangel

    2011-09-01

    Full Text Available In this study, the geochemical analysis of ten sediment samples collected along the fluvial system of the Estrela River, which flows into the northern portion of Guanabara Bay, shows the presence of anthropogenic impacts in this area. Concentrations of Fe, Mn, Zn, Cu, Pb, Cr and Ni obtained were slightly higher, when compared with values found innatural environments. The particle size and organic matter content in most of the analyzed stations showed featuresnot conducive to the accumulation of pollutants due to the low organic matter content and the strong presence ofsand fraction. There was also the fractionation of heavy metals in sediments and it was found the prominence ofresidual and reducible phase, besides the significant occurrence of organic fractions in some analyzed stations. Thesefactors, thus, highlight the potential risks of contamination, where the metals associated with the organic phase canbecome bioavailable in processes of dissolution, provided by physico-chemical changes that can occur in this aquaticenvironment.Neste estudo, analises geoquímicas de dez amostras de sedimentos coletadas ao longo do sistema fluvial do rio Estrela, que deságua na porção norte da Baía de Guanabara, evidenciam a presença de impactos antropogênicos nesta área. As concentrações de Fe, Mn, Zn, Cu, Pb, Cr e Ni obtidas foram ligeiramente elevadas, quando comparados com valores encontrados em ambientes naturais. A granulometria e o teor de matéria orgânica na maioria dos pontos analisados mostraram características não favoráveis à acumulação destes poluentes devido à baixa concentração de matéria orgânica e à forte presença de fração areia. Realizou-se também o fracionamento dos metais pesados nos sedimentos e constatou-se a preeminência da fase residual e redutível, além da ocorrência significativa da fração orgânica em alguns pontos analisados. Estes fatores evidenciam, portanto, riscos potenciais de contamina

  6. The Impact of the Spectral Band Number and Width on the Oil Pollution Diagnostics on Earth Surface by Laser Fluorescence Method

    Directory of Open Access Journals (Sweden)

    Yu. V. Fedotov

    2017-01-01

    Full Text Available Using the remote sensing methods is the most promising for day-to-day control of oil pollution. The laser-induced fluorescence method provides efficient detection and classification of oil pollutions. To monitor oil pollutions on the earth surface is more complicated than on the water one because of lower fluorescence intensity and interfering fluorescence of natural objects available on the earth surface.Properties of oil pollution classifiers depend largely on the number and positions of spectral bands of fluorescence registration. Reducing the number of spectral bands allows us to diminish computation complexity and cost of equipment. In some cases the reduction increases classification accuracy. The number of spectral bands can be reduced through increasing their width.The paper presents mathematical modeling of oil pollution detection and classification. The experimentally obtained fluorescence spectra of oil pollutions on different substrates were used as input data. The k-nearest neighbors algorithm was used to detect and classify oil pollutions. Cross validation was applied in mathematical modeling.The mathematical modeling results have shown that for oil pollutions detection using over 8 spectral bands (band width less than 50 nm a classification error rate does not depend on the further increasing number of the spectral bands.As to the type classification of oil pollutions (4 classes, an increasing width of the spectral bands up to 60 nm (the number of spectral bands reduced up 7 does not lead to a significantly decreasing overall classification accuracy.In the case of the sort classification of oil pollutions (8 classes a local maximum of the overall accuracy has been observed at 25-30 nm width of the spectral band (14-16 spectral bands. The spectral resolution improvement (increasing the number of bands does give an essentially increasing accuracy.The paper has shown that to detect and classify oil pollutions on the earth surface

  7. Synthesis of surface molecular imprinted TiO2/graphene photocatalyst and its highly efficient photocatalytic degradation of target pollutant under visible light irradiation

    Science.gov (United States)

    Lai, Cui; Wang, Man-Man; Zeng, Guang-Ming; Liu, Yun-Guo; Huang, Dan-Lian; Zhang, Chen; Wang, Rong-Zhong; Xu, Piao; Cheng, Min; Huang, Chao; Wu, Hai-Peng; Qin, Lei

    2016-12-01

    The molecular imprinted TiO2/graphene photocatalyst (MIP-TiO2/GR) was successfully prepared with bisphenol A (BPA) as the template molecule (target pollutant) and o-phenylenediamine (OPDA) as functional monomers by the surface molecular imprinting method. The combination between BPA and OPDA led to the formation of the precursor, and the subsequent polymerization of OPDA initiated by ultraviolet radiation can ensure the realization of MIP-TiO2/GR. The samples were characterized by SEM, EDS, XRD, BET, UV-vis DRS and Zeta potential. In addition, adsorption capacities, adsorption selectivity and visible light photocatalytic performances of MIP-TiO2/GR and non-imprinted TiO2/graphene (NIP-TiO2/GR) were evaluated. Moreover, the effects of pH and initial BPA concentration on removal efficiency of BPA were also investigated. The results showed that MIP-TiO2/GR exhibited better adsorption capacity and adsorption selectivity towards the template molecule compared to NIP-TiO2/GR due to the imprinted cavities on the surface of MIP-TiO2/GR. Moreover, the photocatalytic activity of MIP-TiO2/GR toward the target molecules was stronger than that of NIP-TiO2/GR as a result of large adsorption capacity to target molecules and narrow band gap energy on MIP-TiO2/GR. Therefore, modifying the photocatalyst by the surface molecular imprinting is a promising method to improve the molecule recognition and photocatalytic efficiency of photocatalyst for target pollutant.

  8. Determination of free cyanide and total cyanide concentrations in surface and underground waters in Bogoso and its surrounding areas in Ghana

    Directory of Open Access Journals (Sweden)

    S. Obiri

    2007-08-01

    Full Text Available Concentrations of free cyanide and total cyanide in water samples in Bogoso and its surrounding areas in Ghana have been measured in this study. Concentrations of free cyanide and total cyanide were found to be above the maximum permissible discharge limit of effluent from mining companies into natural waters set by Environmental Protection Agency, Ghana (GEPA. A comparison of the results obtained in this study with permissible levels set by US Environmental Protection Agency and the World Health Organization reveals that surface waters in the study areas are highly polluted with cyanide and it's not safe for human consumptions. This means that, the resident in and around Bogoso are at risk.

  9. Quantitative kinetics of proteolytic enzymes determined by a surface concentration-based assay using peptide arrays.

    Science.gov (United States)

    Jung, Se-Hui; Kong, Deok-Hoon; Park, Seoung-Woo; Kim, Young-Myeong; Ha, Kwon-Soo

    2012-08-21

    Peptide arrays have emerged as a key technology for drug discovery, diagnosis, and cell biology. Despite the promise of these arrays, applications of peptide arrays to quantitative analysis of enzyme kinetics have been limited due to the difficulty in obtaining quantitative information of enzymatic reaction products. In this study, we developed a new approach for the quantitative kinetics analysis of proteases using fluorescence-conjugated peptide arrays, a surface concentration-based assay with solid-phase peptide standards using dry-off measurements, and compared it with an applied concentration-based assay. For fabrication of the peptide arrays, substrate peptides of cMMP-3, caspase-3, caspase-9, and calpain-1 were functionalized with TAMRA and cysteine, and were immobilized onto amine-functionalized arrays using a heterobifunctional linker, N-[γ-maleimidobutyloxy]succinimide ester. The proteolytic activities of the four enzymes were quantitatively analyzed by calculating changes induced by enzymatic reactions in the concentrations of peptides bound to array surfaces. In addition, this assay was successfully applied for calculating the Michaelis constant (K(m,surf)) for the four enzymes. Thus, this new assay has a strong potential for use in the quantitative evaluation of proteases, and for drug discovery through kinetics studies including the determination of K(m) and V(max).

  10. Biofunctionalization of the implant surface with different concentrations of a synthetic peptide (P-15).

    Science.gov (United States)

    Lutz, R; Prechtl, C; Nonhoff, J; Weisel, T; Damien, C J; Schlegel, K A

    2013-07-01

    This study aimed at identifying the ideal concentration of a biofunctional surface coating of dental implants with a synthetic peptide (P-15). In a previous study, P-15 was shown to enhance osseointegration parameters. Implants (modified ANKYLOS(®) A8; FRIADENT Plus(®) surface) with five different concentrations (0-400 μg/ml) of a P-15 coating as well as uncoated controls were inserted in the frontal bone of 45 adult domestic pigs. The histomorphometric and microradiographic findings for the coated implants were compared to those for the uncoated ones after 7, 14, and 30 days. No significant differences were observed comparing the peri-implant bone density between the coated and uncoated implants The bone-to-implant contact, as the primary histological parameter for osseointegration, showed high rates for all surfaces investigated (between 73.3 ± 17.9% for the control and 81.9 ± 15.2% for P15 20 μg/ml after 30 days). No significant benefit on osseointegration of a biofunctional P-15 coating of dental implants could be displayed in the present study. © 2012 John Wiley & Sons A/S.

  11. Optimization of sampling for the determination of the mean Radium-226 concentration in surface soil

    International Nuclear Information System (INIS)

    Williams, L.R.; Leggett, R.W.; Espegren, M.L.; Little, C.A.

    1987-08-01

    This report describes a field experiment that identifies an optimal method for determination of compliance with the US Environmental Protection Agency's Ra-226 guidelines for soil. The primary goals were to establish practical levels of accuracy and precision in estimating the mean Ra-226 concentration of surface soil in a small contaminated region; to obtain empirical information on composite vs. individual soil sampling and on random vs. uniformly spaced sampling; and to examine the practicality of using gamma measurements in predicting the average surface radium concentration and in estimating the number of soil samples required to obtain a given level of accuracy and precision. Numerous soil samples were collected on each six sites known to be contaminated with uranium mill tailings. Three types of samples were collected on each site: 10-composite samples, 20-composite samples, and individual or post hole samples; 10-composite sampling is the method of choice because it yields a given level of accuracy and precision for the least cost. Gamma measurements can be used to reduce surface soil sampling on some sites. 2 refs., 5 figs., 7 tabs

  12. Spatial Variation, Pollution Assessment and Source Identification of Major Nutrients in Surface Sediments of Nansi Lake, China

    Directory of Open Access Journals (Sweden)

    Longfeng Wang

    2017-06-01

    Full Text Available Nansi Lake has been seriously affected by intensive anthropogenic activities in recent years. In this study, an extensive survey on spatial variation, pollution assessment as well as the possible sources identification of major nutrients (Total phosphorus: TP, Total nitrogen: TN, and Total organic carbon: TOC in the surface sediments of Nansi Lake was conducted. Results showed that the mean contents of TP, TN and TOC were 1.13-, 5.40- and 2.50- fold higher than their background values respectively. Most of the TN and TOC contents in the surface sediments of Nansi Lake were four times as high or higher and twice as high or higher than the background values except the Zhaoyang sub-lake, and the spatial distribution of TN and TOC contents were remarkably similar over a large area. Nearly all the TP contents in the surface sediments of Nansi Lake were all higher than its background values except most part of the Zhaoyang sub-lake. Based on the enrichment factor (EF and the organic pollution evaluation index (Org-index, TP, TOC and TN showed minor enrichment (1.13, minor enrichment (2.50 and moderately severe enrichment (5.40, respectively, and most part of the Dushan sub-lake and the vicinity of the Weishan island were in moderate or heavy sediments organic pollution, while the other parts were clean. Moreover, according to the results of multivariate statistical analysis, we deduced that anthropogenic TN and TOC were mainly came from industrial sources including enterprises distributed in Jining, Yanzhou and Zoucheng along with iron and steel industries distributed in the southern of the Weishan sub-lake, whereas TP mainly originated from runoff and soil erosion coming from agricultural lands located in Heze city and Weishan island, the local aquacultural activities as well as the domestic sewage discharge of Jining city.

  13. Surface runoff and retention of transported pollutants in strips of riparian vegetation with and without trees

    Science.gov (United States)

    Giaccio, Gustavo; Laterra, Pedro; Aparicio, Virginia; Costa, Jose Luis

    2017-04-01

    In this study, some aspects related to the effect of the crack willow (Salix fragilis L.) invasion on the reduction of runoff and sediment retention, glyphosate, nitrogen and phosphorus in riparian environments with herbaceous vegetation of the Austral Pampa of Argentina were analysed. In order to evaluate the influence of the willows on the filtering mechanisms, surface runoff simulation experiments were carried out in plots of 1.5 m x 2.5 m in environments characterized by the presence vs. the absence of willows. In spite of the small length of the experimental plots, glyphosate retention in the tree-less plots reached 73.6%, a higher value than that recorded in tree stands (43.8%). However, sediment, nitrogen and phosphorus retention did not vary significantly between treatments. On the other hand, the reduction of the volume of runoff in the sites with trees reached 63%, a superior value to the one registered in strips without trees (31%). The presence of trees only significantly modified the biophysical properties of hydraulic conductivity, surface roughness, aerial biomass and soil moisture, compared to areas with no trees. Partial correlation analysis for both tree and no-tree environments showed that the reduction in runoff volume increased significantly with hydraulic conductivity, soil sand content and depth at the water table, and decreased with apparent density, soil moisture and the slope of the riverbank. However, sediment retention increased significantly with aerial, mulch and root biomass and decreased with the slope of the riparian strip. Glyphosate retention increased significantly with sediment retention and decreased with the slope of the riparian strip and the mulch biomass. Nitrogen retention increased with the reduction of runoff flow, soil hydraulic conductivity and depth to the water table and decreased with slope and sediment retention. While, phosphorus retention increased with sediment retention and decreased with slope and soil content

  14. Sampling and sample handling procedures for priority pollutants in surface coal mining wastewaters. [Detailed list to be analyzed for

    Energy Technology Data Exchange (ETDEWEB)

    Hayden, R. S.; Johnson, D. O.; Henricks, J. D.

    1979-03-01

    The report describes the procedures used by Argonne National Laboratory to sample surface coal mine effluents in order to obtain field and laboratory data on 110 organic compounds or classes of compounds and 14 metals and minerals that are known as priority pollutants, plus 5-day biochemical oxygen demand (BOD/sub 5/), total organic carbon (TOC), chemical oxygen demand (COD), total dissolved solids (TDS), and total suspended solids (TSS). Included are directions for preparation of sampling containers and equipment, methods of sampling and sample preservation, and field and laboratory protocols, including chain-of-custody procedures. Actual analytical procedures are not described, but their sources are referenced.

  15. Yeast as an indicator of surface water pollution; Hefe als Bioindikator fuer Gewaesserverunreinigung

    Energy Technology Data Exchange (ETDEWEB)

    Bomhard, S. von [Gymnasium Saarburg (Germany)

    2003-06-01

    The vitality of yeast strains in aqueous solutions is affected by pollutants. In her contribution to 'Jugend forscht', the author added typical water pollutants like kitchen salt, salad oil, detergents and diesel oil to a nutrient broth with yeast in laboratory conditions and measured and analyzed their effects on the basis of CO{sub 2} emissions. In a practical test, water samples of the Saar river were investigated in the same manner, with interesting results. [German] Die Vitalitaet von Hefestaemmen in waessrigen Loesungen wird durch Verunreinigungen beeinflusst. In einer Arbeit zum Wettbewerb 'Jugend forscht' hat die Autorin unter Laborbedingungen typische Gewaesserschadstoffe wie Kochsalz, Speiseoel, Waschmittel und Dieseloel in eine Naehrloesung mit Hefe eingebracht und die Wirkung der Verunreinigungen anhand der freigesetzten CO{sub 2}-Menge gemessen und bewertet. Als praktische Anwendung der Versuche wurden Wasserproben der Saar in gleicher Weise mit interessanten Resultaten untersucht.

  16. Pollution Assessment and Sources Identification of Heavy Metals in Surface Sediments from the Nantaizi Lake, Middle China

    Science.gov (United States)

    Ma, Jinlong; Li, Fei; Jia, Xiaolin; Zhang, Jingdong

    2018-01-01

    The total contents of heavy metal elements including Cr, Cd, Cu, Zn, Pb and As were investigated in sediments from the Nantaizi Lake in Hanyang district of Wuhan. The heavy metal pollution level of Nantaizi Lake was calculated by potential ecological risk index and the main sources of pollutants were researched by correlation analysis and principal component analysis. The results show that heavy metal concentration of Nantaizi Lake sediments is within the Chinese Environmental Quality Standard for Soils (GB 15618-1995) level-II standard limitation. According to the result of potential ecological risk index, ecological hazard rank of heavy metal element of Nantaizi Lake sediments is: Cd>Cu>As>Pb>Zn>Cr, and whole water environment of lake is slightly polluted. Through correlation analysis and principal component analysis, it is found that industrial sewage and domestic wastewater in human activities are the main contributors to heavy metal sources of Nantaizi Lake, and chemical processes, such as endogenous microbial activities of lake etc., also affect heavy metal sources in sediments simultaneously.

  17. Low correlation between household carbon monoxide and particulate matter concentrations from biomass-related pollution in three resource-poor settings

    International Nuclear Information System (INIS)

    Klasen, Elizabeth M.; Wills, Beatriz; Naithani, Neha; Gilman, Robert H.; Tielsch, James M.; Chiang, Marilu; Khatry, Subarna; Breysse, Patrick N.; Menya, Diana; Apaka, Cosmas; Carter, E. Jane; Sherman, Charles B.; Miranda, J. Jaime; Checkley, William

    2015-01-01

    Household air pollution from the burning of biomass fuels is recognized as the third greatest contributor to the global burden of disease. Incomplete combustion of biomass fuels releases a complex mixture of carbon monoxide (CO), particulate matter (PM) and other toxins into the household environment. Some investigators have used indoor CO concentrations as a reliable surrogate of indoor PM concentrations; however, the assumption that indoor CO concentration is a reasonable proxy of indoor PM concentration has been a subject of controversy. We sought to describe the relationship between indoor PM 2.5 and CO concentrations in 128 households across three resource-poor settings in Peru, Nepal, and Kenya. We simultaneously collected minute-to-minute PM 2.5 and CO concentrations within a meter of the open-fire stove for approximately 24 h using the EasyLog-USB-CO data logger (Lascar Electronics, Erie, PA) and the personal DataRAM-1000AN (Thermo Fisher Scientific Inc., Waltham, MA), respectively. We also collected information regarding household construction characteristics, and cooking practices of the primary cook. Average 24 h indoor PM 2.5 and CO concentrations ranged between 615 and 1440 μg/m 3 , and between 9.1 and 35.1 ppm, respectively. Minute-to-minute indoor PM 2.5 concentrations were in a safe range (<25 μg/m 3 ) between 17% and 65% of the time, and exceeded 1000 μg/m 3 between 8% and 21% of the time, whereas indoor CO concentrations were in a safe range (<7 ppm) between 46% and 79% of the time and exceeded 50 ppm between 4%, and 20% of the time. Overall correlations between indoor PM 2.5 and CO concentrations were low to moderate (Spearman ρ between 0.59 and 0.83). There was also poor agreement and evidence of proportional bias between observed indoor PM 2.5 concentrations vs. those estimated based on indoor CO concentrations, with greater discordance at lower concentrations. Our analysis does not support the notion that indoor CO concentration is a

  18. Temperature and concentration stratification effects on non-Newtonian fluid flow past a cylindrical surface

    Science.gov (United States)

    Rehman, Khalil Ur; Khan, Abid Ali; Malik, M. Y.; Zehra, Iffat; Ali, Usman

    The theme of present work is to report the numerical solution of mixed convection tangent hyperbolic fluid flow towards stretching cylindrical surface immersed in a double stratified media. The fluid flow is attained through no slip condition. The flow regime characteristics are modelled in terms of partial differential equations. A similarity transformation is used to transform partial differential equations into coupled non-linear ordinary differential equations. A computational algorithm is executed to predict numerical results. The effects of flow controlling parameters namely, mixed convection parameter, thermal stratification and solutal stratification parameters on velocity, temperature and concentration are examined and offered by means of graphical outcomes. It is noticed that in the presence of mixed convection effect both the fluid temperature and concentration are decreasing function of thermal stratification and solutal stratification parameters respectively. The obtained values are certified by developing comparison with existing values and an excellent agreement is observed which confirms the execution of computational algorithm.

  19. Estimating sub-surface dispersed oil concentration using acoustic backscatter response.

    Science.gov (United States)

    Fuller, Christopher B; Bonner, James S; Islam, Mohammad S; Page, Cheryl; Ojo, Temitope; Kirkey, William

    2013-05-15

    The recent Deepwater Horizon disaster resulted in a dispersed oil plume at an approximate depth of 1000 m. Several methods were used to characterize this plume with respect to concentration and spatial extent including surface supported sampling and autonomous underwater vehicles with in situ instrument payloads. Additionally, echo sounders were used to track the plume location, demonstrating the potential for remote detection using acoustic backscatter (ABS). This study evaluated use of an Acoustic Doppler Current Profiler (ADCP) to quantitatively detect oil-droplet suspensions from the ABS response in a controlled laboratory setting. Results from this study showed log-linear ABS responses to oil-droplet volume concentration. However, the inability to reproduce ABS response factors suggests the difficultly in developing meaningful calibration factors for quantitative field analysis. Evaluation of theoretical ABS intensity derived from the particle size distribution provided insight regarding method sensitivity in the presence of interfering ambient particles. Copyright © 2013 Elsevier Ltd. All rights reserved.

  20. Measurement of the radon exhalation rate from the medium surface by tracing the radon concentration

    International Nuclear Information System (INIS)

    Yanliang Tan; Detao Xiao

    2013-01-01

    The paper will present a method based on the accumulation chamber technique for measuring of radon exhalation from the medium surface. A radon monitor traces the change of radon concentration in the accumulation chamber, and then the radon exhalation can be obtained accurately through linear fit. Based on our recent experiments, the radon exhalation rate from the medium surface obtained from this method is in good agreement with the actual exhalation rate of our simulation facility. This method is superior to the competition method which obtains the radon exhalation through the exponential fit by an external PC-system. The calculation for the exponential fit is very easy by computer and related software. However, for portable instruments, the single chip microcomputer can't calculate the exponential fit rapidly. Thus, this method is usable for developing the new portable instrument to classify building materials, etc. (author)

  1. Reducing surface water total and methyl mercury concentrations and bioavailability using a coagulation-wetland system

    Science.gov (United States)

    Kraus, T. E.; Fleck, J.; Henneberry, Y. K.; Stumpner, E. B.; Krabbenhoft, D. P.; Bachand, P.; Randall, P.

    2013-12-01

    With the recent passage of laws regulating concentrations and loads of mercury (Hg) in surface waters, there is a need to develop management practices that will reduce the export of Hg from both point and non-point sources. Coagulation with metal based salts to remove particles and dissolved organic matter (DOM) from solution is a practice commonly employed by drinking water utilities. Because dissolved Hg is associated with particles and DOM, it follows that Hg should also be removed during the coagulation process and end up associated with the organo-metal precipitate, termed flocculate (floc). The effectiveness of iron- and aluminum-based coagulants for removing both inorganic and methyl mercury (IHg and MeHg, respectively) from solution was demonstrated in laboratory studies conducted on agricultural drainage waters of the Sacramento-San Joaquin Delta: dissolved concentrations of MeHg decreased by 80% while IHg decreased by 97% following coagulation. To test the field application of this technology, samples were collected from the inflows and outflows of wetland treatment cells constructed in the central Delta of California. This replicated field experiment includes three replicates each of three inflow waters treatments: (1) iron sulfate addition, (2) polyaluminum chloride addition, and (3) untreated controls. Water entering and exiting the nine treatment cells was sampled approximately monthly over a 1-year period for total Hg and MeHg in both the dissolved and particulate aqueous phases. Initial results confirm that coagulant addition is removing Hg (total and methyl, particulate and dissolved) from solution and sequestering it in the floc. Seasonal effects on DOM concentration and other factors appear to effect whether passage through the wetland cells alters surface water dissolved organic carbon (DOC) and Hg concentrations. Related studies will examine whether the presence of the floc affects the production and fate of MeHg within the wetland cells. If

  2. Heavy metal pollution in Jamaica 1: Survey of cadmium, lead and zinc concentrations in the Kintyre and Hope Flat districts.

    Science.gov (United States)

    Anglin-Brown, B; Armour-Brown, A; Lalor, G C

    1995-06-01

    Despite its being highly mineralised, the Hope Mine area has become a residential district. Composite soil samples taken from 91 allotments show values for cadmium: Water samples from adits contain 52-86 μg kg(-1) of lead and polluted region and epidemiological studies including intelligence testing to define further the effects of lead on children in this environment would be valuable.

  3. A modified SINTACS method for groundwater vulnerability and pollution risk assessment in highly anthropized regions based on NO3-and SO42-concentrations.

    Science.gov (United States)

    Busico, Gianluigi; Kazakis, Nerantzis; Colombani, Nicolò; Mastrocicco, Micòl; Voudouris, Konstantinos; Tedesco, Dario

    2017-12-31

    Groundwater vulnerability and risk assessment are worldwide tools in supporting groundwater protection and land planning. In this study, we used three of these different methodologies applied to the Campanian Plain located in southern Italy: SINTACS, AVI and LOS. However, their capability to describe the observed chemical pollution of the area has resulted quite poor. For such a reason, a modified SINTACS method has been then implemented in the area in order to get a more reliable view of groundwater vulnerability. NO 3 - and SO 4 2- from more than 400 monitoring wells were used for specific vulnerability assessment. Land use was chosen as key parameter to infer the risk of groundwater pollution in our area. The new methodology seems to show a higher correlation with observed NO 3 - concentrations and a more reliable identification of aquifer's pollution hot spots. The main sources of NO 3 - were found in sub-urban areas, where vulnerability and risk are higher than in other areas. Otherwise due to reducing conditions triggered by the presence of elevated sedimentary organic matter and peat, concentrations below agricultural areas were lower than in sub-urban areas. The SO 4 2- specific vulnerability map showed a positive correlation with observed concentrations, due to geogenic and anthropogenic SO 4 2- sources present in the area. The combination of both NO 3 - and SO 4 2- derived risk maps becomes essential to improve the conceptual model of aquifer pollution in this severely anthropized area. The application of this new and original approach shed light on the strengths and weaknesses of each of the described previous methods and clearly showed how anthropogenic activities have to be taken into account in the assessment process. Copyright © 2017 Elsevier B.V. All rights reserved.

  4. High black carbon and ozone concentrations during pollution transport in the Himalayas: five years of continuous observations at NCO-P global GAW station.

    Science.gov (United States)

    Marinoni, A; Cristofanelli, P; Laj, P; Duchi, R; Putero, D; Calzolari, F; Landi, T C; Vuillermoz, E; Maione, M; Bonasoni, P

    2013-08-01

    To study the influence of polluted air-mass transport carrying ozone (O3) and black carbon (BC) in the high Himalayas, since March 2006 the Nepal Climate Observatory at Pyramid (NCO-P) GAW-WMO global station (Nepal, 5079 m a.s.l.) is operative. During the first 5-year measurements, the O3 and BC concentrations have shown a mean value of 48 +/- 12 ppb (+/- standard deviation) and 208 +/- 374 ng/m3, respectively. Both O3 and BC showed well defined seasonal cycles with maxima during pre-monsoon (O3: 61.3 +/- 7.7 ppbV; BC: 444 +/- 433 ng/m3) and minima during the summer monsoon (O3: 40.1 +/- 12.4 ppbV; BC: 64 +/- 101 ng/m3). The analysis of the days characterised by the presence of a significant BC increase with respect to the typical seasonal cycle identified 156 days affected by "acute" pollution events, corresponding to 9.1% of the entire data-set. Such events mostly occur in the pre-monsoon period, when the O3 diurnal variability is strongly related to the transport of polluted air-mass rich on BC. On average, these "acute" pollution events were characterised by dramatic increases of BC (352%) and O3 (29%) levels compared with the remaining days.

  5. Exploring the modeling of spatiotemporal variations in ambient air pollution within the land use regression framework: Estimation of PM10 concentrations on a daily basis.

    Science.gov (United States)

    Alam, Md Saniul; McNabola, Aonghus

    2015-05-01

    Estimation of daily average exposure to PM10 (particulate mat