WorldWideScience

Sample records for surface pollen samples

  1. Stevens Pond: A postglacial pollen diagram from a small Typha Swamp in Northwestern Minnesota, interpreted from pollen indicators and surface samples

    NARCIS (Netherlands)

    Janssen, C.R.

    1967-01-01

    The pollen assemblages of a core in the coniferhardwood formation in northwestern Minnesota are compared with the floristics of the recent vegetation in the region. Percentage levels of the main tree components have been compared first with those from recent surface samples taken at the same short

  2. Pollen deposition in tauber traps and surface soil samples in the Mar Chiquita coastal lagoon area, pampa grasslands (Argentina

    Directory of Open Access Journals (Sweden)

    Fabiana Latorre

    2010-12-01

    Full Text Available Estimations of airborne pollen loadings deposited in Tauber traps were studied in a coastal lagoon from south-eastern Pampa grasslands, Argentina, in order to assess their relationship with surface samples and to interpret the representativeness of local, regional and extraregional vegetation. Three different environments were considered: a coastal dune barrier with a psammophytic community, a salt marsh with a halophytic community in Mar Chiquita lagoon, and a freshwater community at Hinojales freshwater lake. Based on a record of surface samples taken from a previous paper, a parametric model was built to classify Tauber samples gathered from the natural vegetation communities of the study area. Results revealed that just like their surface counterparts, Tauber trap records qualitatively reflect the predominant vegetation types, although ecological groups feature different quantitative representations depending on the record type. Pollen loadings showed that airborne pollen transport was predominantly of local range, in accordance with previous results from the same study area. Airborne - surface samples relationships enrich our knowledge of the present environment that could be useful to improve paleoecological interpretations of the area.Se estimó el depósito polínico atmosférico de trampas Tauber en una laguna costera del sudeste de la estepa pampeana argentina, con el objetivo de analizar su relación con muestras de polen superficial e interpretar la representatividad de la vegetación local, regional y extraregional. Se consideraron tres ambientes diferentes: una barrera costera de dunas con vegetación psamofítica, la marisma de la laguna costera Mar Chiquita, con vegetación halofítica, y la laguna continental Hinojales, con vegetación hidrofítica. En base a las muestras de superficie y análisis de un trabajo previo, se construyó un modelo paramétrico para clasificar las muestras Tauber tomadas en la vegetación natural del

  3. The comparison of pollen abundance in air and honey samples

    OpenAIRE

    Ingrida Šaulienė; Laura Šukienė; Auste Noreikaite-Merkeliene; Vidmantas Pileckas

    2015-01-01

    Honey as a food has long been used in human nutrition and is still popular. Honey is important because of its therapeutic, prophylactic and strengthening value. Pollen is one of the most decisive components that ensure the quality and type of honey. Modern society becomes more and more sensitive to airborne pollen. Therefore, it is crucial to determine the composition of allergenic plant pollen in natural honey. For this purpose, we studied and compared pollen abundance in honey and air sampl...

  4. Seed set, pollen morphology and pollen surface composition response to heat stress in field pea.

    Science.gov (United States)

    Jiang, Yunfei; Lahlali, Rachid; Karunakaran, Chithra; Kumar, Saroj; Davis, Arthur R; Bueckert, Rosalind A

    2015-11-01

    Pea (Pisum sativum L.) is a major legume crop grown in a semi-arid climate in Western Canada, where heat stress affects pollination, seed set and yield. Seed set and pod growth characteristics, along with in vitro percentage pollen germination, pollen tube growth and pollen surface composition, were measured in two pea cultivars (CDC Golden and CDC Sage) subjected to five maximum temperature regimes ranging from 24 to 36 °C. Heat stress reduced percentage pollen germination, pollen tube length, pod length, seed number per pod, and the seed-ovule ratio. Percentage pollen germination of CDC Sage was greater than CDC Golden at 36 °C. No visible morphological differences in pollen grains or the pollen surface were observed between the heat and control-treated pea. However, pollen wall (intine) thickness increased due to heat stress. Mid-infrared attenuated total reflectance (MIR-ATR) spectra revealed that the chemical composition (lipid, proteins and carbohydrates) of each cultivar's pollen grains responded differently to heat stress. The lipid region of the pollen coat and exine of CDC Sage was more stable compared with CDC Golden at 36 °C. Secondary derivatives of ATR spectra indicated the presence of two lipid types, with different amounts present in pollen grains from each cultivar. © 2015 John Wiley & Sons Ltd.

  5. Securing maximum diversity of Non Pollen Palynomorphs in palynological samples

    DEFF Research Database (Denmark)

    Enevold, Renée; Odgaard, Bent Vad

    2015-01-01

    Palynology is no longer synonymous with analysis of pollen with the addition of a few fern spores. A wide range of Non Pollen Palynomorphs are now described and are potential palaeoenvironmental proxies in the palynological surveys. The contribution of NPP’s has proven important to the interpreta......Palynology is no longer synonymous with analysis of pollen with the addition of a few fern spores. A wide range of Non Pollen Palynomorphs are now described and are potential palaeoenvironmental proxies in the palynological surveys. The contribution of NPP’s has proven important.......g. Schulz & Shumilovskikh 2013). Increasingly it has become customary for palynologists to quantify at least some of the NPP’s appearing on the pollen slides (e.g. Strother et al. 2015, Odgaard 1994). Are these samples representative of the initial NPP assemblages? The usual sample preparation method...... for pollen analysis is based on acetylization (Erdtman 1969) and HF-treatment which are of variable destructiveness to the NPP’s. Some NPP’s might completely vanish and the prepared sample might hold less NPP diversity than the initial NPP assemblage. Consequently, it may be advisable to consider...

  6. Considerations for the preparation of peat samples for palynology, and for the counting of pollen and non-pollen palynomorphs

    Directory of Open Access Journals (Sweden)

    F.M. Chambers

    2011-09-01

    Full Text Available Peat deposits are valuable archives for studying palaeoclimate, the history of local and regional vegetation, and human impact. The most widely applied laboratory analytical technique has been palynology (pollen analysis, which is often limited to the study of pollen and a few easily recognisable spores; however, a variety of other microfossils can be studied in peat deposits and can provide information on past environmental conditions. Among the so-called non-pollen palynomorphs (NPPs are fungal and algal spores that can be used as indicators for local hydrological changes and trophic conditions. This article provides an overview of aspects to consider and sample preparation methods for pollen, spores and other non-pollen palynomorph microfossils in peat deposits; advice on aids to pollen identification and counting; and a brief guide to the range of NPPs that can be counted from prepared subfossil-pollen microslides.

  7. Non-pollen palynomorphs from surface sediments along an altitudinal transect of the Venezuelan Andes

    OpenAIRE

    Montoya, E.; Rull, V.; van Geel, B.

    2010-01-01

    Palynological studies including records of non-pollen palynomorphs (NPP) are uncommon in the Neotropics, in spite of their demonstrated usefulness in other regions. Modern analog studies to improve palaeoecological interpretations of NPP are even more scarce. Here, we report the NPP assemblages recorded in modern surface samples from an altitudinal transect of the Venezuelan Andes, ranging from about 2300 and 4600 m. We compared the assemblages with the results of previous pollen analyses of ...

  8. Pollen

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Records of past vegetation and climate derived from pollen found in lake and ocean sediments. Parameter keywords describe what was measured in this data set....

  9. Comparing pollen spectra from modified Tauber traps and moss samples: examples from a selection of woodlands across Europe

    Czech Academy of Sciences Publication Activity Database

    Pardoe, H. S.; Giesecke, T.; van der Knaap, W. O.; Svitavská-Svobodová, Helena; Kavavadze, E.; Panajiotidis, S.; Gerasimidis, A.; Pidek, I. A.; Zimny, M.; Swieta-Musznicka, J.; Latalova, M.; Noryskiewicz, A. M.; Bozilova, E.; Tonkov, S.; Filipova-Marinova, M.; van Leeuwen, J. F. N.; Kalnina, L.

    2010-01-01

    Roč. 19, č. 4 (2010), s. 271-283 ISSN 0939-6314 R&D Projects: GA AV ČR IAAX00130801 Institutional research plan: CEZ:AV0Z60050516 Keywords : moss samples * surface pollen deposition * representation of tree taxa Subject RIV: EF - Botanics Impact factor: 1.656, year: 2010

  10. Pollen grain surface in Vaccinium myrtillus as seen in scanning electron microscopy

    Directory of Open Access Journals (Sweden)

    Józef Kocoń

    2014-01-01

    Full Text Available Pollen grain surface of Vaccinium myrtillus L. was analyzed by scanning electron microscopy. Pollen grains remain in tetrahedral tetrads. Grain surface is verrucose, consisting of thick, irregularly shaped muri, surrounding small, round or oval lumina. The surface of the muri is fissured, and minute papillae can also be noted.

  11. Modern pollen and stomate deposition in lake surface sediments from across the treeline on the Kola Peninsula, Russia.

    Science.gov (United States)

    Gervais, B R.; MacDonald, G M.

    2001-04-01

    We sampled and analyzed surface sediments from 31 lakes along a latitudinal transect crossing the coniferous treeline on the Kola Peninsula, Russia. The major vegetation zones along the transect were tundra, birch-forest tundra, pine-forest tundra, and forest. The results indicate that the major vegetation types in our study area have distinct pollen spectra. Sum-of-squares cluster analysis and principal components analysis (PCA) groupings of pollen sites correspond to the major vegetation zones. PCA ordination of taxa indicates that the first axis separates taxa typical of the forest zone (Pinus, Picea) from taxa typical of tundra and forest-tundra zones (Polypodiaceae, Ericaceae, and Betula). The current position of the coniferous treeline, defined in our region by Pinus sylvestris, occurs roughly where Pinus pollen values reach 35% or greater. Arboreal pollen (AP)/non-arboreal pollen (NAP) ratios were calculated for each site and plotted against geographic distance along the transect. AP/NAP ratios of 7 or greater are found within pine-forest tundra and forest vegetation zones. Pinus stomates (dispersed stomatal guard cells) are absent from sites north of the coniferous treeline and all but two samples from the forested sites contain stomates. Stomate concentrations among the samples are highly variable and range from 10 to 458 per ml and positively correlate with the changing Pinus pollen values.

  12. Bee Pollen

    Science.gov (United States)

    ... Pollen Extract, Buckwheat Pollen, Extrait de Pollen d’Abeille, Honeybee Pollen, Honey Bee Pollen, Maize Pollen, Pine Pollen, Polen de Abeja, Pollen, Pollen d'Abeille, Pollen d’Abeille de Miel, Pollen de Sarrasin.

  13. The ultrastructure of pollen grain surface in allotetraploid petunia (Petunia hybrida hort. superbissima as revealed by scanning electron microscopy

    Directory of Open Access Journals (Sweden)

    S. Muszyński

    2015-01-01

    Full Text Available The ultrastructure of pollen grain surface in allotetraploid petunias was analyzed by scanning electron microscopy. The pollen grain wall is developed into characteristic pattern of convulations.

  14. Pollen analysis in honey samples from the two main producing regions in the Brazilian northeast.

    Science.gov (United States)

    Sodré, Geni da S; Marchini, Luís C; Carvalho, Carlos A L de; Moreti, Augusta C de C C

    2007-09-01

    Knowledge about the botanical source of honey is very important for the beekeeper while it indicates adequate and abundant supply sources of nectar and pollen for the bees, thus contributing toward improved yield. The present study means to identify the pollen types occurring in 58 samples of honey produced in two states of the northeastern region of Brazil, Piauí (38 samples) and Ceará (20 samples), and to verify the potential of the honey plants during the months of February to August. The samples were obtained directly from beekeepers in each state and analyzed at the Apiculture Laboratory of the Entomology Section of Escola Superior de Agricultura "Luiz de Queiroz", USP, Piracicaba, State of São Paulo, Brazil. The pollen analysis was performed using the acetolysis method. The samples were submitted to both a qualitative and a quantitative analysis. The dominant pollen in the State of Ceará is from Mimosa caesalpiniaefolia, M. verrucosa, Borreria verticillata, Serjania sp., and a Fabaceae pollen type, while in the State of Piauí it is from Piptadenia sp., M. caesalpiniaefolia, M. verrucosa, Croton urucurana and Tibouchina sp.

  15. Evaluating multiplexed next-generation sequencing as a method in palynology for mixed pollen samples.

    Science.gov (United States)

    Keller, A; Danner, N; Grimmer, G; Ankenbrand, M; von der Ohe, K; von der Ohe, W; Rost, S; Härtel, S; Steffan-Dewenter, I

    2015-03-01

    The identification of pollen plays an important role in ecology, palaeo-climatology, honey quality control and other areas. Currently, expert knowledge and reference collections are essential to identify pollen origin through light microscopy. Pollen identification through molecular sequencing and DNA barcoding has been proposed as an alternative approach, but the assessment of mixed pollen samples originating from multiple plant species is still a tedious and error-prone task. Next-generation sequencing has been proposed to avoid this hindrance. In this study we assessed mixed pollen probes through next-generation sequencing of amplicons from the highly variable, species-specific internal transcribed spacer 2 region of nuclear ribosomal DNA. Further, we developed a bioinformatic workflow to analyse these high-throughput data with a newly created reference database. To evaluate the feasibility, we compared results from classical identification based on light microscopy from the same samples with our sequencing results. We assessed in total 16 mixed pollen samples, 14 originated from honeybee colonies and two from solitary bee nests. The sequencing technique resulted in higher taxon richness (deeper assignments and more identified taxa) compared to light microscopy. Abundance estimations from sequencing data were significantly correlated with counted abundances through light microscopy. Simulation analyses of taxon specificity and sensitivity indicate that 96% of taxa present in the database are correctly identifiable at the genus level and 70% at the species level. Next-generation sequencing thus presents a useful and efficient workflow to identify pollen at the genus and species level without requiring specialised palynological expert knowledge. © 2014 German Botanical Society and The Royal Botanical Society of the Netherlands.

  16. Classification of grass pollen through the quantitative analysis of surface ornamentation and texture.

    Science.gov (United States)

    Mander, Luke; Li, Mao; Mio, Washington; Fowlkes, Charless C; Punyasena, Surangi W

    2013-11-07

    Taxonomic identification of pollen and spores uses inherently qualitative descriptions of morphology. Consequently, identifications are restricted to categories that can be reliably classified by multiple analysts, resulting in the coarse taxonomic resolution of the pollen and spore record. Grass pollen represents an archetypal example; it is not routinely identified below family level. To address this issue, we developed quantitative morphometric methods to characterize surface ornamentation and classify grass pollen grains. This produces a means of quantifying morphological features that are traditionally described qualitatively. We used scanning electron microscopy to image 240 specimens of pollen from 12 species within the grass family (Poaceae). We classified these species by developing algorithmic features that quantify the size and density of sculptural elements on the pollen surface, and measure the complexity of the ornamentation they form. These features yielded a classification accuracy of 77.5%. In comparison, a texture descriptor based on modelling the statistical distribution of brightness values in image patches yielded a classification accuracy of 85.8%, and seven human subjects achieved accuracies between 68.33 and 81.67%. The algorithmic features we developed directly relate to biologically meaningful features of grass pollen morphology, and could facilitate direct interpretation of unsupervised classification results from fossil material.

  17. Obtaining accurate and precise environmental reconstructions from the modern analog technique and North American surface pollen dataset

    Science.gov (United States)

    Williams, J. W.; Shuman, B.

    2008-04-01

    Using a recently compiled surface-sample pollen dataset for North America, we test methods to improve the skillfulness (i.e. accuracy and precision) of the modern analog technique (MAT) for continental- to sub-continental-scale paleoenvironmental reconstructions. Interregional floristic differences challenge such reconstructions, because with widening spatial extent each pollen type represents an increasing number of species, each with its unique niche, thus blurring pollen-climate relationships. We conduct a series of cross-validation experiments in which we first explore (1) whether increasing the spatial extent of the pool of potential analogs improves or worsens MAT skill, (2) whether MAT skill is improved by increasing the number of pollen taxa and splitting pollen taxa into regional groups, and (3) the differences in MAT skill among environmental variables. Regional splits are guided by the range boundaries of parent species. Results are analyzed for multiple environmental variables. We then systematically explore options for (a) the value of the no-analog/analog threshold (T), (b) the maximum number of modern analogs (N) allowed for a target fossil sample, and (c) whether the environmental average constructed from the modern analogs should be weighted by their compositional dissimilarity (D) to the target sample. We demonstrate that substantial interregional differences in pollen-climate relationships, particularly between eastern and western North America, degrade MAT precision and accuracy, but these adverse effects can be overcome by expanding the list of taxa used and/or splitting pollen types into regional groups. MAT precision was best when pollen types were regionally split and better when more taxa were used, although increasing the taxon list from 64 to 135 types did not substantially increase performance. Temperature-related variables were reconstructed more precisely than hydrological variables, and there was little difference in MAT skill between

  18. Considerations for the preparation of peat samples for palynology, and for the counting of pollen and non-pollen palynomorphs

    OpenAIRE

    Chambers, F.M.; van Geel, B.; van der Linden, M.

    2011-01-01

    Peat deposits are valuable archives for studying palaeoclimate, the history of local and regional vegetation, and human impact. The most widely applied laboratory analytical technique has been palynology (pollen analysis), which is often limited to the study of pollen and a few easily recognisable spores; however, a variety of other microfossils can be studied in peat deposits and can provide information on past environmental conditions. Among the so-called non-pollen palynomorphs (NPPs) are ...

  19. Considerations for the preparation of peat samples for palynology, and for the counting of pollen and non-pollen palynomorphs

    NARCIS (Netherlands)

    Chambers, F.M.; van Geel, B.; van der Linden, M.

    2011-01-01

    Peat deposits are valuable archives for studying palaeoclimate, the history of local and regional vegetation, and human impact. The most widely applied laboratory analytical technique has been palynology (pollen analysis), which is often limited to the study of pollen and a few easily recognisable

  20. Capturing the surface texture and shape of pollen: a comparison of microscopy techniques.

    Directory of Open Access Journals (Sweden)

    Mayandi Sivaguru

    Full Text Available Research on the comparative morphology of pollen grains depends crucially on the application of appropriate microscopy techniques. Information on the performance of microscopy techniques can be used to inform that choice. We compared the ability of several microscopy techniques to provide information on the shape and surface texture of three pollen types with differing morphologies. These techniques are: widefield, apotome, confocal and two-photon microscopy (reflected light techniques, and brightfield and differential interference contrast microscopy (DIC (transmitted light techniques. We also provide a first view of pollen using super-resolution microscopy. The three pollen types used to contrast the performance of each technique are: Croton hirtus (Euphorbiaceae, Mabea occidentalis (Euphorbiaceae and Agropyron repens (Poaceae. No single microscopy technique provided an adequate picture of both the shape and surface texture of any of the three pollen types investigated here. The wavelength of incident light, photon-collection ability of the optical technique, signal-to-noise ratio, and the thickness and light absorption characteristics of the exine profoundly affect the recovery of morphological information by a given optical microscopy technique. Reflected light techniques, particularly confocal and two-photon microscopy, best capture pollen shape but provide limited information on very fine surface texture. In contrast, transmitted light techniques, particularly differential interference contrast microscopy, can resolve very fine surface texture but provide limited information on shape. Texture comprising sculptural elements that are spaced near the diffraction limit of light (~250 nm; NDL presents an acute challenge to optical microscopy. Super-resolution structured illumination microscopy provides data on the NDL texture of A. repens that is more comparable to textural data from scanning electron microscopy than any other optical

  1. Aeroallergen analyses and their clinical relevance. II. Sampling by high-volume airsampler with immunochemical quantification versus Burkard pollen trap sampling with morphologic quantification

    DEFF Research Database (Denmark)

    Johnsen, C R; Weeke, E R; Nielsen, J

    1992-01-01

    operated 24 h a day. They were placed less than 5 m apart, and estimation of the pollen amount was made on a day-to-day basis during the pollen seasons, and on a weekly basis outside the seasons. The occurrence of the 3 clinically most important allergenic types of pollen, birch, grass, and mugwort......, was analysed, and close correlations between the 2 sampling techniques were found (rs 0.5-0.8, p 1 SQ-U/m3, respectively...

  2. Antimicrobial activity and pollen composition of honey samples collected from different provinces in Turkey.

    Science.gov (United States)

    Mercan, Nazime; Guvensen, Aykut; Celik, Ali; Katircioglu, Hikmet

    2007-03-01

    The antibacterial activity of honey samples from different sources were collected and investigated against Bacillus cereus, Staphylococcus aureus ATCC 25923, Pseudomonas aeruginosa ATCC 27853, Klebsiella pneumoniae ATCC 27736, Morganella morganii, Micrococcus luteus NRRL B-4375, Escherichia coli ATCC 35218, and Candida albicans. Pathogens exhibited different sensitivities towards the honey samples. The results showed that majority of the honey samples (75%) generally inhibitied the bacteria tested. The honey samples which were obtained from Izmir (samples 1 and 2) proved more effective as inhibitors against P. aeruginosa, E. coli, and S. aureus. The honey which was obtained from Muğla (sample 5) exhibited high anticandidal activity on C. albicans. A comparison of the honey samples on the basis of pollen content revealed that they were heterofloral, and samples which had highest antibacterial activity against P. aeruginosa, E. coli, and S. aureus were dominated by pollen from Chenopodiaceae/Amaranthaceae (sample 1), and Trifolium, Trigonella, Cyperaceae, Zea mays and Anthemis taxa (sample 2). The honey proved more effective on bacteria than antibiotics.

  3. Near-surface and columnar measurements with a micro pulse lidar of atmospheric pollen in Barcelona, Spain

    Directory of Open Access Journals (Sweden)

    M. Sicard

    2016-06-01

    Full Text Available We present for the first time continuous hourly measurements of pollen near-surface concentration and lidar-derived profiles of particle backscatter coefficients and of volume and particle depolarization ratios during a 5-day pollination event observed in Barcelona, Spain, between 27 and 31 March 2015. Daily average concentrations ranged from 1082 to 2830 pollen m−3. Platanus and Pinus pollen types represented together more than 80 % of the total pollen. Maximum hourly pollen concentrations of 4700 and 1200 m−3 were found for Platanus and Pinus, respectively. Every day a clear diurnal cycle caused by the vertical transport of the airborne pollen was visible on the lidar-derived profiles with maxima usually reached between 12:00 and 15:00 UT. A method based on the lidar polarization capabilities was used to retrieve the contribution of the pollen to the total aerosol optical depth (AOD. On average the diurnal (09:00–17:00 UT pollen AOD was 0.05, which represented 29 % of the total AOD. Maximum values of the pollen AOD and its contribution to the total AOD reached 0.12 and 78 %, respectively. The diurnal means of the volume and particle depolarization ratios in the pollen plume were 0.08 and 0.14, with hourly maxima of 0.18 and 0.33, respectively. The diurnal mean of the height of the pollen plume was found at 1.24 km with maxima varying in the range of 1.47–1.78 km. A correlation study is performed (1 between the depolarization ratios and the pollen near-surface concentration to evaluate the ability of the former parameter to monitor pollen release and (2 between the depolarization ratios as well as pollen AOD and surface downward solar fluxes, which cause the atmospheric turbulences responsible for the particle vertical motion, to examine the dependency of the depolarization ratios and the pollen AOD upon solar fluxes. For the volume depolarization ratio the first correlation study yields to correlation

  4. Pollen reference collection digitization

    NARCIS (Netherlands)

    Ercan, F.E.Z.|info:eu-repo/dai/nl/41250085X; Donders, T.H.|info:eu-repo/dai/nl/290469872; Bijl, P.K.|info:eu-repo/dai/nl/314028110; Wagner, F.|info:eu-repo/dai/nl/173870783

    2016-01-01

    The extensive Utrecht University pollen reference collection holds thousands of pollen samples of many species and genera from all over the world and has been a basis for the widely-used North West European Pollen Flora. These samples are fixed on glass slides for microscopy use, but the aging

  5. The maize tapetum employs diverse mechanisms to synthesize and store proteins and flavonoids and transfer them to the pollen surface.

    Science.gov (United States)

    Li, Yubing; Suen, Der Fen; Huang, Chien-Yu; Kung, Shung-Yee; Huang, Anthony H C

    2012-04-01

    In anthers, the tapetum synthesizes and stores proteins and flavonoids, which will be transferred to the surface of adjacent microspores. The mechanism of synthesis, storage, and transfer of these pollen-coat materials in maize (Zea mays) differs completely from that reported in Arabidopsis (Arabidopsis thaliana), which stores major pollen-coat materials in tapetosomes and elaioplasts. On maize pollen, three proteins, glucanase, xylanase, and a novel protease, Zea mays pollen coat protease (ZmPCP), are predominant. During anther development, glucanase and xylanase transcripts appeared at a mid developmental stage, whereas protease transcript emerged at a late developmental stage. Protease and xylanase transcripts were present only in the anther tapetum of the plant, whereas glucanase transcript was distributed ubiquitously. ZmPCP belongs to the cysteine protease family but has no closely related paralogs. Its nascent polypeptide has a putative amino-terminal endoplasmic reticulum (ER)-targeting peptide and a propeptide. All three proteins were synthesized in the tapetum and were present on mature pollen after tapetum death. Electron microscopy of tapetum cells of mid to late developmental stages revealed small vacuoles distributed throughout the cytoplasm and numerous secretory vesicles concentrated near the locular side. Immunofluorescence microscopy and subcellular fractionation localized glucanase in ER-derived vesicles in the cytoplasm and the wall facing the locule, xylanase in the cytosol, protease in vacuoles, and flavonoids in subdomains of ER rather than in vacuoles. The nonoverlapping subcellular locations of the three proteins and flavonoids indicate distinct modes of their storage in tapetum cells and transfer to the pollen surface, which in turn reflect their respective functions in tapetum cells or the pollen surface.

  6. Variability within the 10-year pollen rain of a seasonal neotropical forest and its implications for paleoenvironmental and phenological research.

    Science.gov (United States)

    Haselhorst, Derek S; Moreno, J Enrique; Punyasena, Surangi W

    2013-01-01

    Tropical paleoecologists use a combination of mud-water interface and modern pollen rain samples (local samples of airborne pollen) to interpret compositional changes within fossil pollen records. Taxonomic similarities between the composition of modern assemblages and fossil samples are the basis of reconstructing paleoclimates and paleoenvironments. Surface sediment samples reflect a time-averaged accumulation of pollen spanning several years or more. Due to experimental constraints, modern pollen rain samples are generally collected over shorter timeframes (1-3 years) and are therefore less likely to capture the full range of natural variability in pollen rain composition and abundance. This potentially biases paleoenvironmental interpretations based on modern pollen rain transfer functions. To determine the degree to which short-term environmental change affects the composition of the aerial pollen flux of Neotropical forests, we sampled ten years of the seasonal pollen rain from Barro Colorado Island, Panama and compared it to climatic and environmental data over the same ten-year span. We establish that the pollen rain effectively captured the strong seasonality and stratification of pollen flow within the forest canopy and that individual taxa had variable sensitivity to seasonal and annual changes in environmental conditions, manifested as changes in pollen productivity. We conclude that modern pollen rain samples capture the reproductive response of moist tropical plants to short-term environmental change, but that consequently, pollen rain-based calibrations need to include longer sampling periods (≥7 years) to reflect the full range of natural variability in the pollen output of a forest and simulate the time-averaging present in sediment samples. Our results also demonstrate that over the long-term, pollen traps placed in the forest understory are representative samples of the pollen output of both canopy and understory vegetation. Aerial pollen traps

  7. A note on the pollen representation of ivy (Hedera helix L.)

    NARCIS (Netherlands)

    Bottema, S

    2001-01-01

    Pollen productivity and dispersal of ivy (Hedera helix) is discussed on the basis of a simple surface sample study in a situation that has been followed for about 30 yr. The pollen production of a special ivy plant was estimated for the flowering season of 1998. Hedera pollen dispersal was followed

  8. Aerodynamics of saccate pollen and its implications for wind pollination.

    Science.gov (United States)

    Schwendemann, Andrew B; Wang, George; Mertz, Meredith L; McWilliams, Ryan T; Thatcher, Scott L; Osborn, Jeffrey M

    2007-08-01

    Pollen grains of many wind-pollinated plants contain 1-3 air-filled bladders, or sacci. Sacci are thought to help orient the pollen grain in the pollination droplet. Sacci also increase surface area of the pollen grain, yet add minimal mass, thereby increasing dispersal distance; however, this aerodynamic hypothesis has not been tested in a published study. Using scanning electron and transmission electron microscopy, mathematical modeling, and the saccate pollen of three extant conifers with structurally different pollen grains (Pinus, Falcatifolium, Dacrydium), we developed a computational model to investigate pollen flight. The model calculates terminal settling velocity based on structural characters of the pollen grain, including lengths, widths, and depths of the main body and sacci; angle of saccus rotation; and thicknesses of the saccus wall, endoreticulations, intine, and exine. The settling speeds predicted by the model were empirically validated by stroboscopic photography. This study is the first to quantitatively demonstrate the adaptive significance of sacci for the aerodynamics of wind pollination. Modeling pollen both with and without sacci indicated that sacci can reduce pollen settling speeds, thereby increasing dispersal distance, with the exception of pollen grains having robust endoreticulations and those with thick saccus walls. Furthermore, because the mathematical model is based on structural characters and error propagation methods show that the model yields valid results when sample sizes are small, the flight dynamics of fossil pollen can be investigated. Several fossils were studied, including bisaccate (Pinus, Pteruchus, Caytonanthus), monosaccate (Gothania), and nonsaccate (Monoletes) pollen types.

  9. Receptor-like kinases as surface regulators for RAC/ROP-mediated pollen tube growth and interaction with the pistil

    Science.gov (United States)

    Zou, Yanjiao; Aggarwal, Mini; Zheng, Wen-Guang; Wu, Hen-Ming; Cheung, Alice Y.

    2011-01-01

    Background RAC/ROPs are RHO-type GTPases and are known to play diverse signalling roles in plants. Cytoplasmic RAC/ROPs are recruited to the cell membrane and activated in response to extracellular signals perceived and mediated by cell surface-located signalling assemblies, transducing the signals to regulate cellular processes. More than any other cell types in plants, pollen tubes depend on continuous interactions with an extracellular environment produced by their surrounding tissues as they grow within the female organ pistil to deliver sperm to the female gametophyte for fertilization. Scope We review studies on pollen tube growth that provide compelling evidence indicating that RAC/ROPs are crucial for regulating the cellular processes that underlie the polarized cell growth process. Efforts to identify cell surface regulators that mediate extracellular signals also point to RAC/ROPs being the molecular switches targeted by growth-regulating female factors for modulation to mediate pollination and fertilization. We discuss a large volume of work spanning more than two decades on a family of pollen-specific receptor kinases and some recent studies on members of the FERONIA family of receptor-like kinases (RLKs). Significance The research described shows the crucial roles that two RLK families play in transducing signals from growth regulatory factors to the RAC/ROP switch at the pollen tube apex to mediate and target pollen tube growth to the female gametophyte and signal its disintegration to achieve fertilization once inside the female chamber. PMID:22476487

  10. Pollen spectrum of propolis samples from São Paulo State, Brazil - doi: 10.4025/actascianimsci.v35i3.18389

    Directory of Open Access Journals (Sweden)

    Ricardo Oliveira Orsi

    2013-07-01

    Full Text Available The pollen spectrum of propolis is a good indicative of the phytogeographical origin of the bee product and the local flora available for bee visiting. The present study aimed to perform pollen analysis of propolis produced by Apis mellifera L., in the São Paulo State, Brazil. Propolis samples were directly obtained from beekeepers and slides were prepared for qualitative and quantitative analysis of pollen after propolis extraction. According to the results twenty-eight types of pollen were found and distributed in fifteen botanical families. Pollens from Mimosoideae and Myrtaceae types were found in all samples. In São Paulo State, there is a wide variety of vegetal sources which are components of the final propolis composition.   

  11. Pyrrolizidine alkaloids in pollen and pollen products.

    Science.gov (United States)

    Kempf, Michael; Heil, Sandra; Hasslauer, Iris; Schmidt, Lukas; von der Ohe, Katharina; Theuring, Claudine; Reinhard, Annika; Schreier, Peter; Beuerle, Till

    2010-02-01

    Recently, 1,2-dehydropyrrolizidine alkaloid (PA) ester alkaloids, found predominantly as their N-oxides (PANOs, pyrrolizidine N-oxides), have been reported in both honey and in pollen obtained directly from PA plants and pollen loads collected by bees, raising the possibility of health risks for consumers of these products. We confirm these findings in regard to floral pollen, using pollen collected directly from flowers of the known PA plants Senecio jacobaea, S. vernalis, Echium vulgare and pollinia of Phalaenopsis hybrids, and we extend analyses of 1,2-unsaturated PAs and 1,2-unsaturated PANOs to include bee-pollen products currently being sold in supermarkets and on the Internet as food supplements. PA content of floral pollen ranged from 0.5 to 5 mg/g. The highest values were observed in pollen obtained from Senecio species. Up to 95% of the PAs are found as PANOs. Detailed studies with S. vernalis revealed unique PA patterns in pollen and flowers. While seneciphylline was the most prominent PA in S. vernalis pollen, the flowers were dominated by senecionine. To analyze trace amounts of 1,2-unsaturated PAs in pollen products, our previously elaborated method consisting of strong cation exchange-SPE, two reduction steps followed by silylation and subsequent capillary high-resolution GC-MS using SIM mode was applied. In total, 55 commercially available pollen products were analyzed. Seventeen (31%) samples contained 1,2-unsaturated PAs in the range from 1.08 to 16.35 microg/g, calculated as retronecine equivalents. The 1,2-unsaturated PA content of pollen products is expressed in terms of a single sum parameter and no background information such as foraged plants, pollen analysis, etc. was needed to analyze the samples. The detection limit of overall procedure and the reliable quantitation limit were 0.003 and 0.01 microg/g, respectively.

  12. Spatial variation of modern pollen in Oregon and southern Washington, USA.

    Science.gov (United States)

    Minckley; Whitlock

    2000-10-01

    Surface sediments from 95 lakes provide information on the spatial variation of modern pollen spectra in Oregon and southern Washington. Percentages for 13 pollen types were compared within and between vegetation zones to characterize regional patterns of pollen spectra. The percentage data were also compared with climate variables to determine relationships between pollen percentages and regional climate gradients. The composition of modern pollen spectra corresponds well with the distribution of the pollen producers. Most pollen assemblages were generally dominated by Pinus, but those west of the Cascade Range were dominated by Alnus. Low percentages of Pseudotsuga/Larix, Tsuga mertensiana, Abies, and Picea pollen coincided with local occurrence of the trees. The distributions of the pollen data were arranged along gradients of temperature and effective moisture. West of the Cascade Range, Alnus, Tsuga heterophylla, Pseudotsuga/Larix, and Cupressaceae pollen were abundant and correlate well with moderate temperature and high effective moisture. In the shrub-steppe and woodlands east of the Cascade Range, where effective moisture is low, Artemisia, Cupressaceae, and Pinus pollen were dominant. At high elevations, Pinus, T. mertensiana, Abies, and Picea were common pollen types in areas with short growing seasons and high effective moisture. Pollen percentages collected from lake surface sediments, moss polsters, and soils were compared within a number of vegetation types to assess their similarity. The three types of sample yielded similar results for forested areas, but lake sediment samples from upper- and lower-treeline sites captured a more regional picture of the vegetation.

  13. Ball assisted device for analytical surface sampling

    Science.gov (United States)

    ElNaggar, Mariam S; Van Berkel, Gary J; Covey, Thomas R

    2015-11-03

    A system for sampling a surface includes a sampling probe having a housing and a socket, and a rolling sampling sphere within the socket. The housing has a sampling fluid supply conduit and a sampling fluid exhaust conduit. The sampling fluid supply conduit supplies sampling fluid to the sampling sphere. The sampling fluid exhaust conduit has an inlet opening for receiving sampling fluid carried from the surface by the sampling sphere. A surface sampling probe and a method for sampling a surface are also disclosed.

  14. Hierarchical synthesis of corrugated photocatalytic TiO{sub 2} microsphere architectures on natural pollen surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Erdogan, Deniz Altunoz; Ozensoy, Emrah, E-mail: ozensoy@fen.bilkent.edu.tr

    2017-05-01

    Highlights: • Biotemplate-based photocatalytic material was synthesized in the form of corrugated TiO{sub 2} microspheres. • Characterization of photocatalysts as a function of temperature. • Photocatalytic activities studied in the gas and solution phases. - Abstract: Biomaterials are challenging, yet vastly promising templates for engineering unusual inorganic materials with unprecedented surface and structural properties. In the current work, a novel biotemplate-based photocatalytic material was synthesized in the form of corrugated TiO{sub 2} microspheres by utilizing a sol-gel methodology where Ambrosia trifida (Ab, Giant ragweed) pollen was exploited as the initial biological support surface. Hierarchically synthesized TiO{sub 2} microspheres were structurally characterized in detail via SEM-EDX, Raman spectroscopy, XRD and BET techniques in order to shed light on the surface chemistry, crystal structure, chemical composition and morphology of these novel material architectures. Photocatalytic functionality of the synthesized materials was demonstrated both in gas phase as well as in liquid phase. Along these lines, air and water purification capabilities of the synthesized TiO{sub 2} microspheres were established by performing photocatalytic oxidative NOx(g) storage and Rhodamine B(aq) degradation experiments; respectively. The synthetic approach presented herein offers new opportunities to design and create sophisticated functional materials that can be used in micro reactor systems, adsorbents, drug delivery systems, catalytic processes, and sensor technologies.

  15. Hierarchical synthesis of corrugated photocatalytic TiO2 microsphere architectures on natural pollen surfaces

    Science.gov (United States)

    Erdogan, Deniz Altunoz; Ozensoy, Emrah

    2017-05-01

    Biomaterials are challenging, yet vastly promising templates for engineering unusual inorganic materials with unprecedented surface and structural properties. In the current work, a novel biotemplate-based photocatalytic material was synthesized in the form of corrugated TiO2 microspheres by utilizing a sol-gel methodology where Ambrosia trifida (Ab, Giant ragweed) pollen was exploited as the initial biological support surface. Hierarchically synthesized TiO2 microspheres were structurally characterized in detail via SEM-EDX, Raman spectroscopy, XRD and BET techniques in order to shed light on the surface chemistry, crystal structure, chemical composition and morphology of these novel material architectures. Photocatalytic functionality of the synthesized materials was demonstrated both in gas phase as well as in liquid phase. Along these lines, air and water purification capabilities of the synthesized TiO2 microspheres were established by performing photocatalytic oxidative NOx(g) storage and Rhodamine B(aq) degradation experiments; respectively. The synthetic approach presented herein offers new opportunities to design and create sophisticated functional materials that can be used in micro reactor systems, adsorbents, drug delivery systems, catalytic processes, and sensor technologies.

  16. Melliferous flora and pollen characterization of honey samples of Apis mellifera L., 1758 in apiaries in the counties of Ubiratã and Nova Aurora, PR.

    Science.gov (United States)

    Sekine, Elizabete S; Toledo, Vagner A A; Caxambu, Marcelo G; Chmura, Suzane; Takashiba, Eliza H; Sereia, Maria Josiane; Marchini, Luís C; Moreti, Augusta C C C

    2013-03-01

    The aim of this study was to carry out a survey of the flora with potential for beekeeping in the counties of Ubiratã and Nova Aurora-PR through the collection of plants and pollen analyses in honey samples collected monthly. 208 species of plants were recorded, distributed in 66 families. The families that showed the major richness of pollen types were: Asteraceae, Myrtaceae and Solanaceae. Approximately 80 pollen types were found in honey samples, most of them were characterized as heterofloral. Cultivated plants, such as Glycine max (soybean) and Eucalyptus spp., were representative in some months of the year. Exotic species, such as Ricinus communis and Melia azedarach, were also frequent. However, over than 50% of the pollen types belong to native species of the region, such as Schinus terebinthifolius, Baccharis spp. Alchornea triplinervia, Parapiptadenia rigida, Hexaclamys edulis, Zanthoxylum sp. and Serjania spp., indicating the importance of the native vegetation for the survival of the colonies.

  17. Utility of surface pollen assemblages to delimit Eastern Eurasian steppe types.

    Directory of Open Access Journals (Sweden)

    Feng Qin

    Full Text Available Modern pollen records have been used to successfully distinguish between specific prairie types in North America. Whether the pollen records can be used to detect the occurrence of Eurasian steppe, or even to further delimit various steppe types was until now unclear. Here we characterized modern pollen assemblages of meadow steppe, typical steppe and desert steppe from eastern Eurasia along an ecological humidity gradient. The multivariate ordination of the pollen data indicated that Eurasian steppe types could be clearly differentiated. The different steppe types could be distinguished primarily by xerophilous elements in the pollen assemblages. Redundancy analysis indicated that the relative abundances of Ephedra, Tamarix, Nitraria and Zygophyllaceae were positively correlated with aridity. The relative abundances of Ephedra increased from meadow steppe to typical steppe and desert steppe. Tamarix and Zygophyllaceae were found in both typical steppe and desert steppe, but not in meadow steppe. Nitraria was only found in desert steppe. The relative abundances of xerophilous elements were greater in desert steppe than in typical steppe. These findings indicate that Eurasian steppe types can be differentiated based on recent pollen rain.

  18. Levels of Selected Persistent Organic Pollutants (PCB, PBDE and Pesticides in Honey Bee Pollen Sampled in Poland.

    Directory of Open Access Journals (Sweden)

    Marek Łukasz Roszko

    Full Text Available Chemical plant protection is a commonly discussed factor potentially responsible for decline in pollinators and other beneficial insect populations. Various groups of chemicals including persistent organic pollutants could impact a bee colony's welfare and are reported to be present in bee tissue and apiary products. The aim of this work was to evaluate the presence of selected persistent organic pollutant and pesticide residues in bee pollen originating from different geographical regions of Poland. Pesticide residues were identified in 60% of tested bee pollen samples. The compounds identified were mainly active ingredients of fungicide preparations. Insecticide active ingredients were up to 30% of the identified residues. The triazole fungicide tebuconazole and the neonicotinoid insecticide thiacloprid were the most frequently found pesticides in pollen. The highest pesticide concentration was determined for prothioconazole (356 μg kg-1. Mean concentrations of chlorinated biphenyls-EC6 and EC12 were 194 pg g-1 and 74 pg g-1, respectively. CB # 28 has the greatest share in the EC6 profile (mean 61 pg g-1, 31% contribution. Relatively high contributions were also observed for CBs # 101 (35 pg g-1, 18%, # 138 (36 pg g-1, 19% and # 153 (33 pg g-1, 17%. CB # 114 and 118 have the highest share in the dioxin-like biphenyls fraction with mean concentrations of 17.6 and 37.6 pg g-1 (respectively 23 and 50%. Mean calculated concentrations of 39 polybrominated diphenyl ether congeners (Σ39 BDE were 20 ± 27.7 pg g-1. High variability was observed between maximal and minimal determined concentration values. Individual BDEs were found at different frequencies and varying concentration levels. BDEs # 47, 75 and 99 dominated the profile with average concentrations of 3 pg g-1, 3.1 pg g-1, and 2.9 pg g-1, respectively.

  19. [Airborne Japanese red cedar allergens studied by the immunoblotting technique--comparison with pollen counts obtained by Durham sampling and effect of weather].

    Science.gov (United States)

    Takano, M; Murakami, G; Matsuno, M; Onoue, Y; Takayanagi, M; Kayahara, M; Adachi, Y; Adachi, Y; Okada, T

    1993-07-01

    We collected airborne particles with Burkard's sampling tape in Toyama from March to July. According to the immunoblotting technique (Takahashi et al, 1990), the airborne pollen allergens were reacted with anti-Cry j I polyclonal antibody and were stained as blue spots. The areas of these spots were measured with a color image analyzer (CIA) and a densitometer. There were significant correlations between the airborne Cry j I allergen spots (CIA and densitometer) and the pollen counts obtained with a Durham sampler (r = 0.624, 0.555, p < 0.001). The airborne Cry j I allergens however, tended to maintain a higher level than the pollen counts (Durham) in May. We theorized that this discrepancy is caused by cross reactivity with other pollen or crushed cedar pollen particles have allergenicity. There was a negative correlation between the Cry j I spots and rainfall. The pollen counts had a negative correlation with rainfall, and a positive correlation with average wind speed. These results suggest that this method is useful in evaluating fluctuations in airborne Cry j I allergen.

  20. Accuracy and Consistency of Grass Pollen Identification by Human Analysts Using Electron Micrographs of Surface Ornamentation

    Directory of Open Access Journals (Sweden)

    Luke Mander

    2014-08-01

    Full Text Available Premise of the study: Humans frequently identify pollen grains at a taxonomic rank above species. Grass pollen is a classic case of this situation, which has led to the development of computational methods for identifying grass pollen species. This paper aims to provide context for these computational methods by quantifying the accuracy and consistency of human identification. Methods: We measured the ability of nine human analysts to identify 12 species of grass pollen using scanning electron microscopy images. These are the same images that were used in computational identifications. We have measured the coverage, accuracy, and consistency of each analyst, and investigated their ability to recognize duplicate images. Results: Coverage ranged from 87.5% to 100%. Mean identification accuracy ranged from 46.67% to 87.5%. The identification consistency of each analyst ranged from 32.5% to 87.5%, and each of the nine analysts produced considerably different identification schemes. The proportion of duplicate image pairs that were missed ranged from 6.25% to 58.33%. Discussion: The identification errors made by each analyst, which result in a decline in accuracy and consistency, are likely related to psychological factors such as the limited capacity of human memory, fatigue and boredom, recency effects, and positivity bias.

  1. Non-pollen palynomorphs from surface sediments along an altitudinal transect of the Venezuelan Andes

    NARCIS (Netherlands)

    Montoya, E.; Rull, V.; van Geel, B.

    2010-01-01

    Palynological studies including records of non-pollen palynomorphs (NPP) are uncommon in the Neotropics, in spite of their demonstrated usefulness in other regions. Modern analog studies to improve palaeoecological interpretations of NPP are even more scarce. Here, we report the NPP assemblages

  2. Accuracy and consistency of grass pollen identification by human analysts using electron micrographs of surface ornamentation.

    Science.gov (United States)

    Mander, Luke; Baker, Sarah J; Belcher, Claire M; Haselhorst, Derek S; Rodriguez, Jacklyn; Thorn, Jessica L; Tiwari, Shivangi; Urrego, Dunia H; Wesseln, Cassandra J; Punyasena, Surangi W

    2014-08-01

    Humans frequently identify pollen grains at a taxonomic rank above species. Grass pollen is a classic case of this situation, which has led to the development of computational methods for identifying grass pollen species. This paper aims to provide context for these computational methods by quantifying the accuracy and consistency of human identification. • We measured the ability of nine human analysts to identify 12 species of grass pollen using scanning electron microscopy images. These are the same images that were used in computational identifications. We have measured the coverage, accuracy, and consistency of each analyst, and investigated their ability to recognize duplicate images. • Coverage ranged from 87.5% to 100%. Mean identification accuracy ranged from 46.67% to 87.5%. The identification consistency of each analyst ranged from 32.5% to 87.5%, and each of the nine analysts produced considerably different identification schemes. The proportion of duplicate image pairs that were missed ranged from 6.25% to 58.33%. • The identification errors made by each analyst, which result in a decline in accuracy and consistency, are likely related to psychological factors such as the limited capacity of human memory, fatigue and boredom, recency effects, and positivity bias.

  3. DNA analysis for section identification of individual Pinus pollen grains from Belukha glacier, Altai Mountains, Russia

    Science.gov (United States)

    Nakazawa, Fumio; Uetake, Jun; Suyama, Yoshihisa; Kaneko, Ryo; Takeuchi, Nozomu; Fujita, Koji; Motoyama, Hideaki; Imura, Satoshi; Kanda, Hiroshi

    2013-03-01

    Pollen taxon in sediment samples can be identified by analyzing pollen morphology. Identification of related species based on pollen morphology is difficult and is limited primarily to genus or family. Because pollen grains of various ages are preserved at below 0 °C in glaciers and thus are more likely to remain intact or to suffer little DNA fragmentation, genetic information from such pollen grains should enable identification of plant taxa below the genus level. However, no published studies have attempted detailed identification using DNA sequences obtained from pollen found in glaciers. As a preliminary step, this study attempted to analyze the DNA of Pinus pollen grains extracted from surface snow collected from the Belukha glacier in the Altai Mountains of Russia in the summer of 2003. A 150-bp rpoB fragment from the chloroplast genome in each Pinus pollen grain was amplified by polymerase chain reaction, and DNA products were sequenced to identify them at the section level. A total of 105 pollen grains were used for the test, and sequences were obtained from eight grains. From the sequences obtained, the pollen grains were identified as belonging to the section Quinquefoliae. Trees of the extant species Pinus sibirica in the section Quinquefoliae are currently found surrounding the glacier. The consistency of results for this section suggests that the pollen in the glacier originated from the same Pinus trees as those found in the immediate surroundings.

  4. A Improved Seabed Surface Sand Sampling Device

    Science.gov (United States)

    Luo, X.

    2017-12-01

    In marine geology research it is necessary to obtain a suf fcient quantity of seabed surface samples, while also en- suring that the samples are in their original state. Currently,there are a number of seabed surface sampling devices available, but we fnd it is very diffcult to obtain sand samples using these devices, particularly when dealing with fne sand. Machine-controlled seabed surface sampling devices are also available, but generally unable to dive into deeper regions of water. To obtain larger quantities of seabed surface sand samples in their original states, many researchers have tried to improve upon sampling devices,but these efforts have generally produced ambiguous results, in our opinion.To resolve this issue, we have designed an improved andhighly effective seabed surface sand sampling device that incorporates the strengths of a variety of sampling devices. It is capable of diving into deepwater to obtain fne sand samples and is also suited for use in streams, rivers, lakes and seas with varying levels of depth (up to 100 m). This device can be used for geological mapping, underwater prospecting, geological engineering and ecological, environmental studies in both marine and terrestrial waters.

  5. Optimization of Extraction Condition of Bee Pollen Using Response Surface Methodology: Correlation between Anti-Melanogenesis, Antioxidant Activity, and Phenolic Content.

    Science.gov (United States)

    Kim, Seon Beom; Jo, Yang Hee; Liu, Qing; Ahn, Jong Hoon; Hong, In Pyo; Han, Sang Mi; Hwang, Bang Yeon; Lee, Mi Kyeong

    2015-11-02

    Bee pollen is flower pollen with nectar and salivary substances of bees and rich in essential components. Bee pollen showed antioxidant and tyrosinase inhibitory activity in our assay system. To maximize the antioxidant and tyrosinase inhibitory activity of bee pollen, extraction conditions, such as extraction solvent, extraction time, and extraction temperature, were optimized using response surface methodology. Regression analysis showed a good fit of this model and yielded the second-order polynomial regression for tyrosinase inhibition and antioxidant activity. Among the extraction variables, extraction solvent greatly affected the activity. The optimal condition was determined as EtOAc concentration in MeOH, 69.6%; temperature, 10.0 °C; and extraction time, 24.2 h, and the tyrosinase inhibitory and antioxidant activity under optimal condition were found to be 57.9% and 49.3%, respectively. Further analysis showed the close correlation between activities and phenolic content, which suggested phenolic compounds are active constituents of bee pollen for tyrosinase inhibition and antioxidant activity. Taken together, these results provide useful information about bee pollen as cosmetic therapeutics to reduce oxidative stress and hyperpigmentation.

  6. CONTRIBUTIONS TO THE MORPHOLOGY OF POLLEN FROM SOME VARIETIES OF MALUS DOMESTICA, PYRUS COMMUNIS, PRUNUS DOMESTICA, PRUNUS PERSICA AND PRUNUS ARMENIACA

    Directory of Open Access Journals (Sweden)

    Nicoleta IANOVICI

    2010-01-01

    Full Text Available The objective of this study was to compare Rosaceae genotypes from for their pollen viability and morphology. The pollen of some varieties of Malus domestica, Pyrus communis, Prunus domestica, Prunus persica and Prunus armeniaca was identified. Pollen from mature anthers was collected. Pollen grains of all genera of Rosaceae surveyed occur as radially symmetric isopolar monads. The main aspect studied were the shape of pollen in the polar view (polar perimeter and polar area of pollen. Shape of pollen is triangular-obtuse-convex in polar view. The pollen class is trizonocolpate-obtus-triangular while the sculpturing of exine surface is striate. The number of colpi is three while the spines are absent. Apart from fully developed pollen grains, also much smaller, not completely developed pollen were found in the samples of the examined species. The viability of the pollen was determined on 1% 2,3,5-triphenyl tetrazolium chloride (TTC. Viable, semi-viable and dead pollen numbers and their percentages were determined. This stain test may be used to determine pollen viability in these species to provide only a rough estimate of viability. The results presented here are important for improving our understanding of Rosaceae reproduction biology. Knowledge of reproduction biology, particularly pollen viability and quality, is critical for the newly-developed cultivars.

  7. Surface studies of plasma processed Nb samples

    International Nuclear Information System (INIS)

    Tyagi, Puneet V.; Doleans, Marc; Hannah, Brian S.; Afanador, Ralph; Stewart, Stephen; Mammosser, John; Howell, Matthew P; Saunders, Jeffrey W; Degraff, Brian D; Kim, Sang-Ho

    2015-01-01

    Contaminants present at top surface of superconducting radio frequency (SRF) cavities can act as field emitters and restrict the cavity accelerating gradient. A room temperature in-situ plasma processing technology for SRF cavities aiming to clean hydrocarbons from inner surface of cavities has been recently developed at the Spallation Neutron Source (SNS). Surface studies of the plasma-processed Nb samples by Secondary ion mass spectrometry (SIMS) and Scanning Kelvin Probe (SKP) showed that the NeO 2 plasma processing is very effective to remove carbonaceous contaminants from top surface and improves the surface work function by 0.5 to 1.0 eV.

  8. Surface studies of plasma processed Nb samples

    Energy Technology Data Exchange (ETDEWEB)

    Tyagi, Puneet V. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Spallation Neutron Source (SNS); Doleans, Marc [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Spallation Neutron Source (SNS); Hannah, Brian S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Spallation Neutron Source (SNS); Afanador, Ralph [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Spallation Neutron Source (SNS); Stewart, Stephen [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Spallation Neutron Source (SNS); Mammosser, John [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Spallation Neutron Source (SNS); Howell, Matthew P [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Spallation Neutron Source (SNS); Saunders, Jeffrey W [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Spallation Neutron Source (SNS); Degraff, Brian D [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Spallation Neutron Source (SNS); Kim, Sang-Ho [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Spallation Neutron Source (SNS)

    2015-01-01

    Contaminants present at top surface of superconducting radio frequency (SRF) cavities can act as field emitters and restrict the cavity accelerating gradient. A room temperature in-situ plasma processing technology for SRF cavities aiming to clean hydrocarbons from inner surface of cavities has been recently developed at the Spallation Neutron Source (SNS). Surface studies of the plasma-processed Nb samples by Secondary ion mass spectrometry (SIMS) and Scanning Kelvin Probe (SKP) showed that the NeO2 plasma processing is very effective to remove carbonaceous contaminants from top surface and improves the surface work function by 0.5 to 1.0 eV.

  9. The morphology of pollen presenter and polymorphism of pollen grains Taraxacum officinale F. H. Wigg.

    Directory of Open Access Journals (Sweden)

    Elżbieta Weryszko-Chmielewska

    2012-12-01

    Full Text Available The study of the structure of the pollen presenter of Taraxacum officinale and morphology of pollen grains was conducted based on plant material sampled from three different sites. One of them was a forest meadow situated away from the city, and the other two were located in the city centre of Lublin. Light and electron scanning microscopy were used in the study. The pollen presenter in Taraxacum officinale occurs at the upper part of the style situated over the androecium and on the outer part of the stigma. Numerous unicellular trichomes are found on the entire surface of the epidermis of the presenter. The function of the presenter consists in transferring pollen grains above the androecium and corolla petals. Its activity does not stop after pollen release from anthers. Taraxacum pollen grains represent the Crepis - type. Most frequently, they are tricolporate, radially symmetric and isopolar. In terms of the size, they are included in medium-sized grains. In the material examined, many deformed and asymmetric grains were observed, though they were marked by high viability at the level of 96.5-99%. Grains with the largest average lengths of the equatorial and polar axes were found in plants sampled from the meadow situated out of town. In the plant material from all sites, grains with disturbances of the external structure occurred.

  10. Precipitation signal in pollen rain from tropical forests, South India.

    Science.gov (United States)

    Barboni, D; Bonnefille, R

    2001-04-01

    We have analyzed the pollen content of 51 surface soil samples collected in tropical evergreen and deciduous forests from the Western Ghats of South India sampled along a west to east gradient of decreasing rainfall (between 11 degrees 30-13 degrees 20'N and 75 degrees 30-76 degrees 30'E). Values of mean annual precipitation (Pann, mm/yr) have been calculated at each of the 51 sampling sites from a great number of meteorological stations in South India, using a method of data interpolation based on artificial neural network. Interpolated values at the pollen sites of Pann range from 1200 to 5555mm/yr, while mean temperature of the coldest month (MTCO) remains >15 degrees C and humidity factor (AET/PET, the actual evapotranspiration to potential evapotranspiration ratio) remains also included between 65 and 72%.Results are presented in the form of percentage pollen diagrams where samples are arranged according to increasing values of annual precipitation. They indicate that the climatic signal of rainfall is clearly evidenced by distinct pollen associations. Numerical analyses show that annual precipitation is an important parameter explaining the modern distribution of pollen taxa in this region. Pollen taxa markers of high rainfall (Pann >2500mm/yr) are Mallotus type, Elaeocarpus, Syzygium type, Olea dioica, Gnetum ula, and Hopea type, associated with Ixora type and Caryota. Pollen taxa markers of low rainfall (Pann <2500mm/yr) are Melastomataceae/Combretaceae, Maytenus type, Lagerstroemia and Grewia. The proportions of evergreen taxa and of arboreal taxa vary according to rainfall values. Indeed, when rainfall is <2500mm/yr, percentage of arboreal pollen (AP) is <50% and proportion of evergreen taxa is <20%. When rainfall exceeds 2500mm/yr, AP values average 70%, and proportion of evergreen taxa increases from 60 to 90%. Moreover, a good correlation between precipitation and proportion of evergreen taxa (0.85) presumes that precipitation can be estimated from

  11. Spatial Sorting For Sampled Surface Geometries

    Science.gov (United States)

    Posdamer, Jeffrey L.

    1983-07-01

    An octal tree subdivision recursively divides a bounded three-dimensional volume into octants about an internal division point. This scheme has been used to represent cellular or enumerated voxel models of solid objects. Given one or more sets of points sampled from the surface of a solid, an octal tree may be generated in which each leaf node contains m or less points. By specifying the tree traversal rule, the points are accessed in a sorted order. By defining m=3, a divide-and-conquer surface triangulation algorithm may be developed which does not require special sampling conditions (such as co-planarity) on subsets of the sample points. By assigning every polygon on a facetted surface to its containing octal element(octel) a pre-ordering is established on the faces. From any viewpoint, surface polygons can be visited in a priority ordered fashion by appropriate tree traversal. The pre-ordering established is shown to be useful in several graphics related contexts including: a viewpoint independent data structure leading to a hidden surface technique; a ray-tracing algorithm; a virtual frame buffer with reduced page faults; and, a simple geometric merging of sets of surface measurements containing no fiducial information.

  12. Pollen analyses for pollination research, acetolysis

    Directory of Open Access Journals (Sweden)

    Gretchen D. Jones

    2014-08-01

    Full Text Available Analysis of the pollen associated with pollinators can reveal their role in pollination, the habitats and plants they visit, from where they migrated, what they eat, and dispersal patterns in and around cropping systems. However, finding pollen on and or in a pollinator depends on the technique used to recover the pollen. Acetolysis can be used to recover pollen from internal insect tissues (gut, alimentary canal, crop, etc., external tissues (proboscis, legs, eyes, etc. or both. Acetolysis is the best technique for recovering pollen because any tissue is dissolved and lipids and debris are removed from the sample and the pollen grains. This makes the diagnostic characteristics of the pollen grains more visible so that accurate pollen identification can be made. By using the proper technique, better pollen recovery can be made and thus better data can be obtained.

  13. Surface pollen-vegetation relationships in the forest-steppe, taiga and tundra landscapes of the Russian Altai Mountains

    Czech Academy of Sciences Publication Activity Database

    Pelánková, Barbora; Chytrý, M.

    2009-01-01

    Roč. 157, 3-4 (2009), s. 253-265 ISSN 0034-6667 Institutional research plan: CEZ:AV0Z60050516 Keywords : modern pollen spectra * pollen deposition * southern Siberia Subject RIV: EF - Botanics Impact factor: 2.145, year: 2009

  14. Surface sampling concentration and reaction probe

    Science.gov (United States)

    Van Berkel, Gary J; Elnaggar, Mariam S

    2013-07-16

    A method of analyzing a chemical composition of a specimen is described. The method can include providing a probe comprising an outer capillary tube and an inner capillary tube disposed co-axially within the outer capillary tube, where the inner and outer capillary tubes define a solvent capillary and a sampling capillary in fluid communication with one another at a distal end of the probe; contacting a target site on a surface of a specimen with a solvent in fluid communication with the probe; maintaining a plug volume proximate a solvent-specimen interface, wherein the plug volume is in fluid communication with the probe; draining plug sampling fluid from the plug volume through the sampling capillary; and analyzing a chemical composition of the plug sampling fluid with an analytical instrument. A system for performing the method is also described.

  15. Role of the plant-specific endoplasmic reticulum stress-inducible gene TIN1 in the formation of pollen surface structure in Arabidopsis thaliana

    KAUST Repository

    Iwata, Yuji

    2012-01-01

    Accumulation of unfolded proteins in the endoplasmic reticulum (ER) of eukaryotic cells triggers the transcriptional activation of ER-resident molecular chaperones and folding enzymes to maintain cellular homeostasis. This process is known as the ER stress response or the unfolded protein response. We have identified tunicamycin induced 1 (TIN1), a plant-specific ER stress-inducible Arabidopsis thaliana gene. The TIN1 protein is localized in the ER; however, its molecular function has yet to be clarified. In this study, we performed functional analysis of TIN1 in planta. RT-PCR analysis showed that TIN1 is highly expressed in pollen. Analysis using the β-glucuronidase reporter gene demonstrated that the TIN1 promoter is active throughout pollen development, peaking at the time of flowering and in an ovule of an open flower. Although a T-DNA insertion mutant of TIN1 grows normally under ambient laboratory conditions, abnormal pollen surface morphology was observed under a scanning electron microscope. Based on the current and previous observations, a possible physiological function of TIN1 during pollen development is discussed. © 2012 The Japanese Society for Plant Cell and Molecular Biology.

  16. System and method for extracting a sample from a surface

    Science.gov (United States)

    Van Berkel, Gary; Covey, Thomas

    2015-06-23

    A system and method is disclosed for extracting a sample from a sample surface. A sample is provided and a sample surface receives the sample which is deposited on the sample surface. A hydrophobic material is applied to the sample surface, and one or more devices are configured to dispense a liquid on the sample, the liquid dissolving the sample to form a dissolved sample material, and the one or more devices are configured to extract the dissolved sample material from the sample surface.

  17. Comparative pollen analysis of honeys from apiary and open ...

    African Journals Online (AJOL)

    Comparative pollen analysis of honeys from apiary and open markets in Nigeria and Bénin Republic. ... Eleven honey samples, six from the apiary and five from the open markets, were analysed for their pollen content. Pollen types ... Key words: Pollen, Bees, Guinea savanna, Botanical origin, Honey, Melissopalynology ...

  18. Non-target evaluation of contaminants in honey bees and pollen samples by gas chromatography time-of-flight mass spectrometry.

    Science.gov (United States)

    Hakme, E; Lozano, A; Gómez-Ramos, M M; Hernando, M D; Fernández-Alba, A R

    2017-10-01

    This work presents a non-targeted screening approach for the detection and quantitation of contaminants in bees and pollen, collected from the same hive, by GC-EI-ToF-MS. It consists of a spectral library datasets search using a compound database followed by a manual investigation and analytical standard confirmation together with semi-quantitation purposes. Over 20% of the compounds found automatically by the library search could not be confirmed manually. This number of false positive detections was mainly a consequence of an inadequate ion ratio criterion (±30%), not considered in the automatic searching procedure. Eight compounds were detected in bees and pollen. They include insecticides/acaricides (chlorpyrifos, coumaphos, fluvalinate-tau, chlorfenvinphos, pyridaben, and propyl cresol) at a concentration range of 1-1207 μg kg -1 , herbicides (oxyfluorfen) at a concentration range of 212-1773 μg kg -1 and a growth regulator hormone (methoprene). Some compounds were detected only in pollen; such as herbicides (clomazone), insecticides/acaricides and fungicides used to control Varroa mites as benzylbenzoate, bufencarb, allethrin, permethrin, eugenol and cyprodinil. Additional compounds were detected only in bees: flamprop-methyl, 2-methylphenol (2-49 μg kg -1 ) and naphthalene (1-23 μg kg -1 ). The proposed method presents important advantages as it can avoid the use of an unachievable number of analytical standards considered target compounds "a priori" but not present in the analyzed samples. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Pollen input to, and incorporation in, two crater lakes in tropical northeast Australia.

    Science.gov (United States)

    Walker

    2000-09-01

    Pollen input to the water surfaces of maar crater lakes Barrine and Eacham (1km(2) and 0.5km(2) respectively, ca. 720m a.s.l.), surrounded by rainforest in northeastern Australia, were measured in floating Tauber traps for a variety of periods spanning the years 1978 to 1985. The mean weekly total pollen catch is 75% of that estimated for the surrounding region of varied vegetation. Regardless of their sources, the influxes of pollen taxa are unevenly distributed over the lakes' surfaces. There is similar variation through time, with some indication that this might be smoothed over periods of 5years or more. There are no inflow streams and pollen input down surrounding slopes is negligible. Mean total pollen influx to seston traps close to the lakes' bottoms (1979 to 1988) is <5% of that to the Tauber traps, a discrepancy attributed to trap design. In contrast, mean annual influx measured by the Tauber traps is similar to that estimated from dated sediment samples younger than 1966 AD at Lake Barrine. The proportions of different pollen taxa are less affected by trap position or period of exposure than are their influxes; their mean percentages for Tauber traps, seston traps and sediment samples are all rather similar.The similarity between the mean contribution of exclusively rainforest pollen to the lakes' surfaces (56%) and to Oldfield traps in rainforest interiors (51%) emphasizes the importance of the rainforests, which clothe the crater walls, as sources of pollen to the lakes. The impact of pollen from other vegetation in the region, although present, is much smaller than at interfaces between rainforest and other vegetation types. All this pollen is mixed within and above the crater and delivered to the lakes' surfaces by gravity and frequent rainfall. Limnological processes redistribute it in the water body before it is incorporated into the deep-lake sediments.The value and limitations of current pollen transport and accumulation theory are noted in

  20. POLLEN AND SEED SURFACE MORFOLOGY IN SOME REPRESENTATIVES OF THE GENUS RHODODENDRON SUBSECT. RHODORASTRUM (ERICACEAE IN THE RUSSIAN FAR EAST

    Directory of Open Access Journals (Sweden)

    I. M. Koksheeva

    2015-05-01

    Full Text Available Comparative study of pollen and seed morphology of three species of Rhododendron L. subsect. Rhodorastrum (Maxim. Cullen (Rh. dauricum L., Rh. mucronolatum Turcz., Rh. sichotense Pojark. is performed. Results of discriminant analysis of the total of morphometric characters of pollen and seeds have proved the distinctness of all three species from each other. Differences of polen are observed in the type of sculpture (granulate, rugulate, microrugulate and in the diameter of tetrads. The coefficient of elongation of the exotesta cells is established as a valuable morphometric character

  1. The relationships of modern pollen spectra to vegetation and climate along a steppe-forest-tundra transition in southern Siberia, explored by decision trees

    Czech Academy of Sciences Publication Activity Database

    Pelánková, Barbora; Kuneš, P.; Chytrý, M.; Jankovská, Vlasta; Ermakov, N.; Svitavská-Svobodová, Helena

    2008-01-01

    Roč. 18, č. 8 (2008), s. 1259-1271 ISSN 0959-6836 R&D Projects: GA AV ČR IAA6163303 Institutional research plan: CEZ:AV0Z60050516 Keywords : Classification and regression trees * pollen / vegetation relationship * surface pollen samples Subject RIV: EF - Botanics Impact factor: 2.167, year: 2008

  2. Pollen grains are efficient cloud condensation nuclei

    Energy Technology Data Exchange (ETDEWEB)

    Pope, F D, E-mail: fdp21@cam.ac.uk [Department of Chemistry, University of Cambridge, Lensfield Road, Cambridge CB2 1EW (United Kingdom)

    2010-10-15

    This letter presents a laboratory study investigating the ability of pollen grains to act as cloud condensation nuclei. The hygroscopicity of pollen is measured under subsaturated relative humidities using an electrodynamic balance. It is found, along with other results, that pollen exhibits bulk uptake of water under subsaturated conditions. Through the use of an environmental scanning electron microscope it was observed that the surface of pollen is wettable at high subsaturated humidities. The hygroscopic response of the pollen to subsaturated relative humidities is parametrized using {kappa}-Koehler theory and values of the parameter {kappa} for pollen are between 0.05 and 0.1. It is found that while pollen grains are only moderately hygroscopic, they can activate at critical supersaturations of 0.001% and lower, and thus pollen grains will readily act as cloud condensation nuclei. While the number density of pollen grains is too low for them to represent a significant global source of cloud condensation nuclei, the large sizes of pollen grains suggest that they will be an important source of giant cloud condensation nuclei. Low temperature work using the environmental scanning electron microscope indicated that pollen grains do not act as deposition ice nuclei at temperatures warmer than - 15 deg. C.

  3. Reconstructing biomes from palaeoecological data: a general method and its application to European pollen data at 0 and 6 ka

    Energy Technology Data Exchange (ETDEWEB)

    Prentice, I.C. [Lund Univ. (Sweden). Dept. of Ecology; Guiot, J. [Lab. de Botanique Historique et Palynologie, CNRS, Marseille (France); Huntley, B. [Univ. of Durham (United Kingdom). Dept. of Biological Sciences; Jolly, D. [Lund Univ. (Sweden). Dept. of Ecology; Cheddadi, R. [European Pollen Data Base, Centre Universitaire d`Arles (France)

    1996-02-01

    Biome models allow the results of experiments with atmospheric general circulation models to be translated into global maps of potential natural vegetation. The use of biome models as a diagnostic tool for palaeoclimate simulations can yield maps that are directly comparable with palaeoecological (pollen and plant macrofossil) records provided these records are ``biomized``, i.e. assigned to biomes in a consistent way. This article describes a method for the objective biomization of pollen samples based on fuzzy logic. Pollen types (taxa) are assigned to one or more plant functional types (PFTs), then affinity scores are calculated for each biome in turn based on its list of characteristic PFTs. The pollen sample is assigned to the biome to which it has the highest affinity, subject to a tie-breaking rule. Modern pollen data from surface samples, reflecting present vegetation across Europe, are used to validate the method. Pollen data from dated sediment cores are then used to reconstruct European vegetation patterns for 6 ka. The reconstruction shows systematic differences from present that are consistent with previous interpretations. The method has proved robust with respect to human impacts on vegetation, and provides a rational way to interpret combinations of pollen types that do not have present-day analogs. The method demands minimal prior information and is therefore equally suitable for use in other regions with richer floras, and/or lower densities of available modern and fossil pollen samples, than Europe. (orig.). With 3 figs., 3 tabs.

  4. Pollen assemblages as paleoenvironmental proxies in the Florida Everglades

    Science.gov (United States)

    Willard, D.A.; Weimer, L.M.; Riegel, W.L.

    2001-01-01

    Analysis of 170 pollen assemblages from surface samples in eight vegetation types in the Florida Everglades indicates that these wetland sub-environments are distinguishable from the pollen record and that they are useful proxies for hydrologic and edaphic parameters. Vegetation types sampled include sawgrass marshes, cattail marshes, sloughs with floating aquatics, wet prairies, brackish marshes, tree islands, cypress swamps, and mangrove forests. The distribution of these vegetation types is controlled by specific environmental parameters, such as hydrologic regime, nutrient availability, disturbance level, substrate type, and salinity; ecotones between vegetation types may be sharp. Using R-mode cluster analysis of pollen data, we identified diagnostic species groupings; Q-mode cluster analysis was used to differentiate pollen signatures of each vegetation type. Cluster analysis and the modern analog technique were applied to interpret vegetational and environmental trends over the last two millennia at a site in Water Conservation Area 3A. The results show that close modern analogs exist for assemblages in the core and indicate past hydrologic changes at the site, correlated with both climatic and land-use changes. The ability to differentiate marshes with different hydrologic and edaphic requirements using the pollen record facilitates assessment of relative impacts of climatic and anthropogenic changes on this wetland ecosystem on smaller spatial and temporal scales than previously were possible. ?? 2001 Elsevier Science B.V.

  5. Pollen assemblages as paleoenvironmental proxies in the Florida Everglades.

    Science.gov (United States)

    Willard, D A.; Weimer, L M.; Riegel, W L.

    2001-04-01

    Analysis of 170 pollen assemblages from surface samples in eight vegetation types in the Florida Everglades indicates that these wetland sub-environments are distinguishable from the pollen record and that they are useful proxies for hydrologic and edaphic parameters. Vegetation types sampled include sawgrass marshes, cattail marshes, sloughs with floating aquatics, wet prairies, brackish marshes, tree islands, cypress swamps, and mangrove forests. The distribution of these vegetation types is controlled by specific environmental parameters, such as hydrologic regime, nutrient availability, disturbance level, substrate type, and salinity; ecotones between vegetation types may be sharp. Using R-mode cluster analysis of pollen data, we identified diagnostic species groupings; Q-mode cluster analysis was used to differentiate pollen signatures of each vegetation type. Cluster analysis and the modern analog technique were applied to interpret vegetational and environmental trends over the last two millennia at a site in Water Conservation Area 3A. The results show that close modern analogs exist for assemblages in the core and indicate past hydrologic changes at the site, correlated with both climatic and land-use changes. The ability to differentiate marshes with different hydrologic and edaphic requirements using the pollen record facilitates assessment of relative impacts of climatic and anthropogenic changes on this wetland ecosystem on smaller spatial and temporal scales than previously were possible.

  6. Unexpected presence of Fagus orientalis complex in Italy as inferred from 45,000-year-old DNA pollen samples from Venice lagoon.

    Science.gov (United States)

    Paffetti, Donatella; Vettori, Cristina; Caramelli, David; Vernesi, Cristiano; Lari, Martina; Paganelli, Arturo; Paule, Ladislav; Giannini, Raffaello

    2007-08-16

    Phylogeographic analyses on the Western Euroasiatic Fagus taxa (F. orientalis, F. sylvatica, F. taurica and F. moesiaca) is available, however, the subdivision of Fagus spp. is unresolved and there is no consensus on the phylogeny and on the identification (both with morphological than molecular markers) of Fagus Eurasiatic taxa. For the first time molecular analyses of ancient pollen, dated at least 45,000 years ago, were used in combination with the phylogeny analysis on current species, to identify the Fagus spp. present during the Last Interglacial period in Italy. In this work we aim at testing if the trnL-trnF chloroplast DNA (cpDNA) region, that has been previously proved efficient in discriminating different Quercus taxa, can be employed in distinguishing the Fagus species and in identifying the ancient pollen. 86 populations from 4 Western Euroasistic taxa were sampled, and sequenced for the trnL-trnF region to verify the efficiency of this cpDNA region in identifying the Fagus spp.. Furthermore, Fagus crenata (2 populations), Fagus grandifolia (2 populations), Fagus japonica, Fagus hayatae, Quercus species and Castanea species were analysed to better resolve the phylogenetic inference. Our results show that this cpDNA region harbour some informative sites that allow to infer relationships among the species within the Fagaceae family. In particular, few specific and fixed mutations were able to discriminate and identify all the different Fagus species. Considering a short fragment of 176 base pairs within the trnL intron, 2 transversions were found able in distinguishing the F. orientalis complex taxa (F. orientalis, F. taurica and F. moesiaca) from the remaining Fagus spp. (F. sylvatica, F. japonica, F. hayataea, F. crenata and F. grandifolia). This permits to analyse this fragment also in ancient samples, where DNA is usually highly degraded. The sequences data indicate that the DNA recovered from ancient pollen belongs to the F. orientalis complex since

  7. Unexpected presence of Fagus orientalis complex in Italy as inferred from 45,000-year-old DNA pollen samples from Venice lagoon

    Directory of Open Access Journals (Sweden)

    Paganelli Arturo

    2007-08-01

    Full Text Available Abstract Background Phylogeographic analyses on the Western Euroasiatic Fagus taxa (F. orientalis, F. sylvatica, F. taurica and F. moesiaca is available, however, the subdivision of Fagus spp. is unresolved and there is no consensus on the phylogeny and on the identification (both with morphological than molecular markers of Fagus Eurasiatic taxa. For the first time molecular analyses of ancient pollen, dated at least 45,000 years ago, were used in combination with the phylogeny analysis on current species, to identify the Fagus spp. present during the Last Interglacial period in Italy. In this work we aim at testing if the trnL-trnF chloroplast DNA (cpDNA region, that has been previously proved efficient in discriminating different Quercus taxa, can be employed in distinguishing the Fagus species and in identifying the ancient pollen. Results 86 populations from 4 Western Euroasistic taxa were sampled, and sequenced for the trnL-trnF region to verify the efficiency of this cpDNA region in identifying the Fagus spp.. Furthermore, Fagus crenata (2 populations, Fagus grandifolia (2 populations, Fagus japonica, Fagus hayatae, Quercus species and Castanea species were analysed to better resolve the phylogenetic inference. Our results show that this cpDNA region harbour some informative sites that allow to infer relationships among the species within the Fagaceae family. In particular, few specific and fixed mutations were able to discriminate and identify all the different Fagus species. Considering a short fragment of 176 base pairs within the trnL intron, 2 transversions were found able in distinguishing the F. orientalis complex taxa (F. orientalis, F. taurica and F. moesiaca from the remaining Fagus spp. (F. sylvatica, F. japonica, F. hayataea, F. crenata and F. grandifolia. This permits to analyse this fragment also in ancient samples, where DNA is usually highly degraded. The sequences data indicate that the DNA recovered from ancient pollen

  8. Pollen analyses for pollination research, unacetolyzed pollen

    Directory of Open Access Journals (Sweden)

    Gretchen D. Jones

    2012-10-01

    Full Text Available Pollinators feed on the pollen, nectar, and other plant exudates that are associated with flowers. As a result of this feeding activity, pollen becomes attached to them. Analysis of this pollen can reveal what they eat, their dispersal patterns in and around cropping systems, and their role in pollination. However, finding pollen on and or in a pollinator depends on the technique used to recover pollen. Two very easy techniques are described in detail that have been used to recover pollen from a variety of pollinators including beneficial and harmful insects, spiders, bats, and other pollinators. These techniques can be used to recover pollen from internal tissues (gut, alimentary canal, crop, etc., external tissues (proboscis, legs, eyes, etc., or both. By using the proper technique, better pollen recovery can be made and thus better data can be obtained about the pollinators, the foods they eat, the plants they pollinate, their migration routes and source zones.

  9. Relation between modern pollen rain, vegetation and climate in northern China: Implications for quantitative vegetation reconstruction in a steppe environment.

    Science.gov (United States)

    Ge, Yawen; Li, Yuecong; Bunting, M Jane; Li, Bing; Li, Zetao; Wang, Junting

    2017-05-15

    Vegetation reconstructions from palaeoecological records depend on adequate understanding of relationships between modern pollen, vegetation and climate. A key parameter for quantitative vegetation reconstructions is the Relative Pollen Productivity (RPP). Differences in both environmental and methodological factors are known to alter the RPP estimated significantly, making it difficult to determine whether the underlying pollen productivity does actually vary, and if so, why. In this paper, we present the results of a replication study for the Bashang steppe region, a typical steppe area in northern China, carried out in 2013 and 2014. In each year, 30 surface samples were collected for pollen analysis, with accompanying vegetation survey using the "Crackles Bequest Project" methodology. Sampling designs differed slightly between the two years: in 2013, sites were located completely randomly, whilst in 2014 sampling locations were constrained to be within a few km of roads. There is a strong inter-annual variability in both the pollen and the vegetation spectra therefore in RPPs, and annual precipitation may be a key influence on these variations. The pollen assemblages in both years are dominated by herbaceous taxa such as Artemisia, Amaranthaceae, Poaceae, Asteraceae, Cyperaceae, Fabaceae and Allium. Artemisia and Amaranthaceae pollen are significantly over-represented for their vegetation abundance. Poaceae, Cyperaceae and Fabaceae seem to have under-represented pollen for vegetation with correspondingly lower RPPs. Asteraceae seems to be well-represented, with moderate RPPs and less annual variation. Estimated Relevant Source Area of Pollen (RSAP) ranges from 2000 to 3000m. Different sampling designs have an effect both on RSAP and RPPs and random sample selection may be the best strategy for obtaining robust estimates. Our results have implications for further pollen-vegetation relationship and quantitative vegetation reconstruction research in typical steppe

  10. A Comet Surface Sample Return System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed Phase I investigation will focus on the development of spacecraft systems required to obtain a sample from the nucleus of a comet, hermetically seal the...

  11. Sample preparation for SEM of plant surfaces

    OpenAIRE

    A.K. Pathan; J. Bond; R.E. Gaskin

    2010-01-01

    Plant tissues must be dehydrated for observation in most electron microscopes. Although a number of sample processing techniques have been developed for preserving plant tissues in their original form and structure, none of them are guaranteed artefact-free. The current paper reviews common scanning electron microscopy techniques and the sample preparation methods employed for visualisation of leaves under specific types of electron microscopes. Common artefacts introduced by specific techniq...

  12. The Representativeness of Olea Pollen from Olive Groves and the Late Holocene Landscape Reconstruction in Central Mediterranean

    Directory of Open Access Journals (Sweden)

    Assunta Florenzano

    2017-10-01

    Full Text Available Modern pollen spectra are an invaluable reference tool for paleoenvironmental and cultural landscape reconstructions, but the importance of knowing the pollen rain released from orchards remains underexplored. In particular, the role of cultivated trees is in past and current agrarian landscapes has not been fully investigated. Here, we present a pollen analysis of 70 surface soil samples taken from 12 olive groves in Basilicata and Tuscany, two regions of Italy that exemplify this cultivation in the Mediterranean basin. This study was carried out to assess the representativeness of Olea pollen in modern cultivations. Although many variables can influence the amount of pollen observed in soils, it was clear that most of the pollen was deposited below the trees in the olive groves. A rapid decline in the olive pollen percentages (c. 85% on average was found when comparing samples taken from IN vs. OUT of each grove. The mean percentages of Olea pollen obtained from the archeological sites close to the studied orchards suggest that olive groves were established far from the Roman farmhouses of Tuscany. Further south, in the core of the Mediterranean basin, the cultivation of Olea trees was likely situated ~500–1,000 m from the rural sites in Basilicata, and dated from the Hellenistic to the Medieval period.

  13. Palynology of IODP Site U1307 at the Pliocene to Pleistocene transition: sea-surface conditions in the Labrador Sea and pollen input from the Greenland vegetation

    Science.gov (United States)

    Aubry, Aurelie; de Vernal, Anne

    2016-04-01

    We investigate the marine and terrestrial palynological record from marine core sediment collected in the Labrador Sea off southwest Greenland (IODP 1307, 58.5058°N, -46.4005°W) in order to assess on the vegetation over southern Greenland from pollen and spore and reconstruct oceanic condition from dinocysts during the Pliocene to Pleistocene transition (around 2.58Ma), when permanent ice started to developed in the Northern Hemisphere. The study sequence that encompasses from 3.0 to 2.5 Ma is characterized by high species diversity of dinocysts, most of the assemblages being characterized by modern taxa. s. The dominance of Bitectatodinium sp., Operculodinium centrocarpum, Nematosphaeropsis labyrinthus and Brigantedinium sp., suggest cool, low saline environment characterized by stratified surface water mass, not unlike those prevailing presently along the the southeast Canadian margins. However, the overall palynological assemblage contains abundant acritarcha, notably Cymatiosphaera sp. and Lavradosphaera sp., which probably belong to Prasinophytes (green algae) and are often associated with epicontinental marine environments in the fossil marine records. The pollen assemblages are characterizedby high proportion of Pinus sp., which has exceptional dispersal properties often resulting in long distance transport and making it difficult to identify precisely the location of the source vegetation. Nevertheless, the occurrence of Picea sp., , Tsuga sp., Corylus sp., Alnus sp. and Betula sp. in late Pliocene assemblages suggest input from boreal-type forest located in a relatively proximal source, likely the southwest Greenland. In the early Pleistocene, lower pollen concentrations together with higher proportion of herbaceous taxa may indicate that more open tundra-like vegetation established in the source area.

  14. Marking live conifer pollen for long-distance dispersal experiments.

    Science.gov (United States)

    Williams, Claire G; von Aderkas, Patrick

    2011-01-01

    Study of long-distance dispersal (LDD) theory requires a method for marking live LDD pollen. Such a method must complement the more intensive sampling methods involving molecular cytogenetics, proteomics, and genomics. We have developed a new method for marking live Pinus taeda pollen using two dyes, rhodamine 123 and aniline blue, dissolved in a sucrose solution. Marked and unmarked pollen were compared with respect to in vitro germination, storage, terminal velocity and in vivo pollen-tube penetration of ovules. We found that: (1) both types of marked pollen retained their capacity for germination, (2) both types of marked pollen had similar aerodynamic properties as unmarked pollen controls, (3) marked pollen retained its germination capacity for 48 h, and (4) of the marked pollen, only the aniline-marked pollen penetrated ovules during pollination. Germination declined rapidly for both types of marked pollen after 48 h and before 37 days at -20°C storage, while the unmarked pollen lots retained 93% germination at all stages. Our method for marking live P. taeda pollen is feasible for tracing LDD pollen if released and deposited within 48 h of dye treatment.

  15. Use of MODIS Satellite Images and an Atmospheric Dust Transport Model to Evaluate Juniperus spp. Pollen Phenology and Transport

    Science.gov (United States)

    Luvall, J. C.; Sprigg, W. A.; Levetin, E.; Huete, A.; Nickovic, S.; Pejanovic, G. A.; Vukovic, A.; Van de Water, P. K.; Myers, O. B.; Budge, A. M.; hide

    2011-01-01

    Pollen can be transported great distances. Van de Water et al., 2003 reported Juniperus spp. pollen, a significant aeroallergen was transported 200-600 km. Hence local observations of plant phenology may not be consistent with the timing and source of pollen collected by pollen sampling instruments. Direct detection of pollen via satellite is not practical. A practical alternative combines modeling and phenological observations using ground based sampling and satellite data. The DREAM (Dust REgional Atmospheric Model) is a verified model for atmospheric dust transport modeling using MODIS data products to identify source regions and quantities of dust (Nickovic et al. 2001). The use of satellite data products for studying phenology is well documented (White and Nemani 2006). In the current project MODIS data will provide critical input to the PREAM model providing pollen source location, timing of pollen release, and vegetation type. We are modifying the DREAM model (PREAM - Pollen REgional Atmospheric Model) to incorporate pollen transport. The linkages already exist with DREAM through PHAiRS (Public Health Applications in Remote Sensing) to the public health community. This linkage has the potential to fill this data gap so that the potential association of health effects of pollen can better be tracked for possible linkage with health outcome data which may be associated with asthma, respiratory effects, myocardial infarction, and lost workdays. Juniperus spp. pollen phenology may respond to a wide range of environmental factors such as day length, growing degree-days, precipitation patterns and soil moisture. Species differences are also important. These environmental factors vary over both time and spatial scales. Ground based networks such as the USA National Phenology Network have been established to provide national wide observations of vegetation phenology. However, the density of observers is not adequate to sufficiently document the phenology variability

  16. The AMS dating of pollen from syngenetic ice-wedge ice

    Energy Technology Data Exchange (ETDEWEB)

    Vasil' chuk, Alla C. E-mail: vasilch@orc.ru; Kim, Jong-Chan; Vasil' chuk, Yurij K

    2004-08-01

    The features of pollen occurrence in ice-wedge ice such as: size of pollen of tundra plants, incoming pollen into frost cracks together with melt water, dust and partially from host sediment and also clay envelopes around pollen grains caused the pretreatment methods of ice-wedge ice samples. Good preservation of thin-wall pollen grains of Salix and Liliaceae after pretreatment evidenced appropriate pretreatment procedure. There is evident correlation between pollen dates and re-deposited pollen and spores content. However an interpretation of {sup 14}C dating of pollen concentrate is required independent time scale such as annual laminas or the AMS dates of macro or microfossils.

  17. Sampling procedure for lake or stream surface water chemistry

    Science.gov (United States)

    Robert Musselman

    2012-01-01

    Surface waters collected in the field for chemical analyses are easily contaminated. This research note presents a step-by-step detailed description of how to avoid sample contamination when field collecting, processing, and transporting surface water samples for laboratory analysis.

  18. Pollen Contents Of Commercial Honeys Of Opi, Nsukka, Enugu ...

    African Journals Online (AJOL)

    Pollen analyses of seven honey samples from Opi-Nsukka Mini market were evaluated for their pollen composition. The results yielded a total of 77 plants belonging to 40 families of flowering plants. Thirty-three plants were identified to the generic level, while thirty-two plants were identified to the specific levels. The pollen ...

  19. Calibrating the pollen signal in modern rodent middens from northern Chile to improve the interpretation of the late Quaternary midden record

    Science.gov (United States)

    de Porras, María Eugenia; Maldonado, Antonio; Zamora-Allendes, Andrés; Latorre, Claudio

    2015-11-01

    The use of rodent middens from northern Chile as paleoecological archives has at times been questioned due to concerns about their biogenic origin and the degree to which their record represents vegetation composition rather than rodent habits. To address such concerns, we carried out a modern calibration study to assess the representation of vegetation by pollen records from rodent middens. We compared vegetation censuses with soil-surface and midden (matrix and feces) pollen samples from sites between 21° and 28°S. The results show that (1) the pollen signal from the midden matrix provides a more realistic reflection of local vegetation than soil-surface samples due to the pollen-deposition processes that occur in middens; and (2) in contrast to feces pollen assemblages, which feature some biases, rodent dietary habits do not seem to influence midden matrix pollen assemblages, probably because midden agents are dietary generalists. Our finding that modern pollen data from rodent middens reflect vegetation patterns confirms the reliability of midden pollen records as paleoecological archives in northern Chile.

  20. Recent pollen spectra from the deciduous and coniferous-deciduous forests of Northeastern Minnesota: a study in pollen dispersal

    NARCIS (Netherlands)

    Janssen, C.R.

    1966-01-01

    Pollen samples were taken along nine transects across local vegetational belts bordering bogs or ponds in overall deciduous and coniferous-deciduous forest regions. Three types of pollen rain are distinguished: local, extralocal, and regional. Local pollen rain is derived from plants that grow at or

  1. Pollen morphology and variability of Tulipa hungarica Borb | Ćalić ...

    African Journals Online (AJOL)

    Pollen morphology of the endemic species Tulipa hungarica Borb was investigated with the goal of diversity protection and conservation. Morphology of pollen was evaluated using a scanning electron microscopy. Pollen grain was monosulcate with perforate striate exine surface. Also, pollen of T. hungarica showed ...

  2. Optimization of conditions for in vitro pollen germination and pollen ...

    African Journals Online (AJOL)

    Pollen germination and pollen tube growth might have a significant effect on fruit and seed production. This study was conducted to investigate the best medium for pollen germination and pollen tube growth of date palm male. Significant differences in percentages of pollen germination and pollen tube growth were ...

  3. More than sixty origins of pantoporate pollen in angiosperms.

    Science.gov (United States)

    Prieu, Charlotte; Sauquet, Hervé; Gouyon, Pierre-Henri; Albert, Béatrice

    2017-12-01

    Apertures in pollen grains are key structures of the wall, involved in pollen tube germination and exchanges with the environment. Aperture types in angiosperms are diverse, but pollen with one and three apertures (including monosulcate and tricolpate, respectively) are the two most common types. Here, we investigate the phylogenetic distribution in angiosperms of pollen with many round, scattered apertures called pantoporate pollen. We constructed a morphological data set with species producing pantoporate pollen and representative angiosperm species with other pollen types, sampled from every angiosperm order, with a total of 1260 species distributed in 330 families. This data set was analyzed with parsimony to characterize the phylogenetic distribution of pantoporate pollen in angiosperms. We show that pantoporate pollen is distributed throughout most of the angiosperm tree, including early diverging angiosperms, monocots, and eudicots. However, this pollen type is usually restricted to a few species in a given group, and is seldom fixed at large taxonomical scales, with a few notable exceptions. Pantoporate pollen evolved many times during angiosperm history, but the persistence of this morphology in the long term is infrequent. This distribution pattern could indicate conflicting short-term and long-term selective pressures, pantoporate pollen being selected in the short run, but eliminated in the long run. Biological hypotheses supporting this scenario are discussed, in the context of both theoretical and empirical data on pollen biology. © 2017 Botanical Society of America.

  4. [Identification of airborne pollen and airborne particles with pollen allergen (Cry j 1, Dac g) by aeroallergen immunoblotting technique].

    Science.gov (United States)

    Takahashi, Yuichi; Nagoya, Takao; Ohta, Nobuo

    2002-08-01

    After collection of airborne particles with a seven-day recording volumetric spore trap (Burkard model) using optically clear, pressure sensitive acrylic adhesive tapes, a dry PVDF membrane was pressed down firmly onto the adhesive tape, antigen-antibody reaction was performed in full contact with the tapes and PVDF membrane. Dark purple spots from airborne pollen allergens were examined under a light microscope to evaluate the form of pollens and particles wit h the antigenicity. It is clarified that identification of the form of pollens with the antigencity is possible not only pollens with the antigenicity but a pollen has already lost its shape, and it is also clarified that some airborne particular matters have the pollen antigencity. Airborne samples were collected during the Cryptomeria japonica or grass pollen season. Samples collected during the C. japonica pollen season were treated with anti-Cry j 1 monoclonal antibody, and those during the grass pollen season with anti-Dac g rabbit IgG. Samples collected during the C. japonica and the grass pollen peak season were treated with antibodies from sera of pollinosis patients. Spots originated not only from relevant pollen grains but also from parts of airborne particular matter have the pollen antigenicity and some spots could not observed for any kind of particles.

  5. Pollen characteristics and in vitro pollen germination of Cedrus ...

    African Journals Online (AJOL)

    PRECIOUS

    2009-11-02

    Nov 2, 2009 ... 1Forest Tree Seeds and Tree Breeding Research Directory, Ankara, Turkey. 2Zonguldak Karaelmas ... germination rate in MS medium was achieved in clone no.11342 with 84.77% among the pollen samples of 2005. On the other hand ... Among these species, Cedrus libani A. Rich. (Lebanon. Cedar) is a ...

  6. Accumulation and variability of maize pollen deposition on leaves of European Lepidoptera host plants and relation to release rates and deposition determined by standardised technical sampling.

    Science.gov (United States)

    Hofmann, Frieder; Kruse-Plass, Maren; Kuhn, Ulrike; Otto, Mathias; Schlechtriemen, Ulrich; Schröder, Boris; Vögel, Rudolf; Wosniok, Werner

    2016-01-01

    Risk assessment for GMOs such as Bt maize requires detailed data concerning pollen deposition onto non-target host-plant leaves. A field study of pollen on lepidopteran host-plant leaves was therefore undertaken in 2009-2012 in Germany. During the maize flowering period, we used in situ microscopy at a spatial resolution adequate to monitor the feeding behaviour of butterfly larvae. The plant-specific pollen deposition data were supplemented with standardised measurements of pollen release rates and deposition obtained by volumetric pollen monitors and passive samplers. In 2010, we made 5377 measurements of maize pollen deposited onto leaves of maize, nettle, goosefoot, sorrel and blackberry. Overall mean leaf deposition during the flowering period ranged from 54 to 478 n/cm 2 (grains/cm 2 ) depending on plant species and site, while daily mean leaf deposition values were as high as 2710 n/cm 2 . Maximum single leaf-deposition values reached up to 103,000 n/cm 2 , with a 95 % confidence-limit upper boundary of 11,716 n/cm 2 . Daily means and variation of single values uncovered by our detailed measurements are considerably higher than previously assumed. The recorded levels are more than a single degree of magnitude larger than actual EU expert risk assessment assumptions. Because variation and total aggregation of deposited pollen on leaves have been previously underestimated, lepidopteran larvae have actually been subjected to higher and more variable exposure. Higher risks to these organisms must consequently be assumed. Our results imply that risk assessments related to the effects of Bt maize exposure under both realistic cultivation conditions and worst-case scenarios must be revised. Under common cultivation conditions, isolation buffer distances in the kilometre range are recommended rather than the 20-30 m distance defined by the EFSA.

  7. MICROBIAL QUALITY OF HONEY MIXTURE WITH POLLEN

    Directory of Open Access Journals (Sweden)

    Ján Mareček

    2011-02-01

    Full Text Available Normal 0 21 MicrosoftInternetExplorer4 The aim of this study was evaluation of microbial quality in raw materials (honey, pollen and evaluation of microbial quality in honey mixture with pollen (2.91 % and 3.85 % and also dynamics of microbial groups in honey mixtures with pollen after 14 days storage at the room temperature (approximately 25 °C and in cold store (8 °C. We used dilution plating method for testing of samples. Detections of total plate microbial count (aerobic and anaerobic microorganisms, sporulating bacteria, coliform bacteria, Bifidobacterium sp., Lactobacillus sp. and microscopic fungi were performed. In general, counts of microorganisms decreased in honey mixture with pollen compared to raw pollen and these counts increased compared to natural honey. Total plate count was 5.37 log KTJ.g-1 in pollen; 1.36 log KTJ.g-1 in honey; 2.97 log KTJ.g-1 in honey mixture with 2.91 % pollen and 2.04 log KTJ.g-1 in honey mixture with 3.85 % pollen. Coliform bacteria were detected in pollen (1.77 log KTJ.g-1. Then, we found coliform bacteria in one sample of honey mixtures with pollen (2.91 % - 1.00 log KTJ.g-1.Bifidobacterium species were detected only in raw pollen. We did not findLactobacillus sp. in any of the samples. Microscopic fungi were detected on two cultivating media. Yeasts were present in pollen sample (average 5.39 log KTJ.g-1, honey mixture with 2.91 % pollen (average 2.51 log KTJ.g-1 and honey mixture with 3.85 % pollen (average 1.58 log KTJ.g-1. Filamentous microscopic fungi were detectable in pollen (average 3.38 log KTJ.g-1, in honey (only on one medium: 1.00 log KTJ.g-1, in honey mixture with 2.91 % pollen (average 1.15 log KTJ.g-1 and in honey mixture with 3.85 % pollen (1.71 %. Raw pollen contained microscopic fungi as Absidiasp., Mucor sp., Alternaria sp. andEmericella nidulans. Honey mixture with 2.91 % pollen after storage (14 days contained lower microbial counts when compared with the sample

  8. Espectro polínico de amostras de mel de Melipona mandacaia Smith, 1863 (Hymenoptera: Apidae = Pollen spectrum from honey samples of Melipona mandacaia Smith, 1863 stingless bee (Hymenoptera: Apidae

    Directory of Open Access Journals (Sweden)

    Rogério Marcos de Oliveira Alves

    2006-01-01

    Full Text Available O espectro polínico de amostras de mel da abelha Melipona mandacaia foi analisado com objetivo de elucidar os recursos alimentares utilizados por essa espécie. A identificação das plantas visitadas foi realizada com base na análise dos tipos polínicos encontrados nas amostras de mel coletadas em 11 colônias localizadas no município de São Gabriel, em área de caatinga do Estado da Bahia, Brasil (11º14’S e 41º52’W. As análises quantitativas e qualitativas foram realizadas com o objetivo de determinar as porcentagens e classes de freqüência dos tipos polínicos presentes nas amostras de mel. Foram encontrados 26 tipos polínicos, sendo o tipo Piptadenia rigida (Mimosaceae considerado dominante. Ricinus communis (Euphorbiaceae, Mimosa verrucata (Mimosaceae e M. arenosa (Mimosaceae foram considerados pólen isolado importante. As famílias mais representativas no espectro polínico das amostras de mel foram Mimosaceae, Euphorbiaceae, Asteraceae e Anacardiaceae.The pollen spectrum from honey samples of Melipona mandacaia stingless bee was analyzed aiming at elucidating the alimentaryresources used by that species. The identification of the visited plants was based on the analysis of pollen from honey samples collected in 11 hives located in São Gabriel county, in the semiarid area of Bahia State, Brazil (11º14’S and 41º52’W. The quantitative and qualitative analyses of honey samples were conducted in order to determine the pollen types percentages and frequency classes. Twenty-six pollen types were found, being the Piptadenia rigida type (Mimosaceae considered dominant. Ricinus communis (Euphorbiaceae, Mimosa verrucata (Mimosaceae and M. arenosa (Mimosaceae were considered important isolated pollen. The most representative families found in the pollen spectrum of the honey samples were Mimosaceae, Euphorbiaceae, Asteraceae and Anacardiaceae.

  9. [The epidemiology of pollen allergy].

    Science.gov (United States)

    Charpin, D; Caillaud, D

    2014-04-01

    The prevalence of seasonal allergic rhinitis can be established through surveys performed in a sample of the general population. These surveys are based on a questionnaire, which could lead to an overestimate of prevalence rates, and on measurements of specific IgE, which need to be interpreted in the light of the responses to the questionnaire. Such surveys are few in France and need to be updated. Risk factors for seasonal allergic rhinitis are genetic, epigenetic and environmental. Relationships between exposure to pollen and health can be documented through ecological and panel surveys. Panel surveys may give information on threshold levels and dose-response relationships. In addition to pollen exposure, global warming and air pollutants act as cofactors. Monitoring of both pollen exposure and its health effects should be encouraged and strengthened. Copyright © 2014 SPLF. Published by Elsevier Masson SAS. All rights reserved.

  10. Efficient maximal Poisson-disk sampling and remeshing on surfaces

    KAUST Repository

    Guo, Jianwei

    2015-02-01

    Poisson-disk sampling is one of the fundamental research problems in computer graphics that has many applications. In this paper, we study the problem of maximal Poisson-disk sampling on mesh surfaces. We present a simple approach that generalizes the 2D maximal sampling framework to surfaces. The key observation is to use a subdivided mesh as the sampling domain for conflict checking and void detection. Our approach improves the state-of-the-art approach in efficiency, quality and the memory consumption.

  11. Interpolating and sampling sequences in finite Riemann surfaces

    OpenAIRE

    Ortega-Cerda, Joaquim

    2007-01-01

    We provide a description of the interpolating and sampling sequences on a space of holomorphic functions on a finite Riemann surface, where a uniform growth restriction is imposed on the holomorphic functions.

  12. Aerobiology and pollen allergy in Islamabad

    International Nuclear Information System (INIS)

    Abbas, S.; Raza, S.M.; Khan, M.A.

    2009-01-01

    Pollen allergies affect a significant proportion of Islamabad residents. Many patients with pollen allergy Are hospitalized in Islamabad in spring (February to April), fall seasons (July to September) and after monsoons. To determine the type and concentration of airborne pollens causing allergic diseases in the susceptible patients in Islamabad. The study was conducted from January 2005 to December 2006 and Burkard Volumetric Spore Trap' provided by the World Allergy Organization was used. This spore trap was placed in the F-10 area of Islamabad and samples were collected on weekly basis during the whole study period. To obtain the sample, the spore trap drum was loaded with a strip of sticky tape every week. The sampled sticky tape was then collected each week at a specified time and replaced with a fresh strip of sticky tape, which was then collected next week. This cycle , continued for whole study period. From each sample seven permanent slides were made and mounted with gelevitol mounting media; The slides were then examined microscopically. A total of 702 individuals irrespective of age or gender were included in the study. Skin prick tests were performed for pollens using allergen extracts of Hollister-Steir, USA and the results were recorded. The two flowering seasons in Islamabad i.e., spring and fall caused maximum pollen allergies. The Broussonetia papyrifera (paper mulberry) tree in spring, and the Cannabis sativa (bhang) weed in the fall season, Produced the highest seasonal pollen counts. In the spring season of 2005, Broussonetia papyrifera produced the highest pollen count, (73%) of the total pollen count, with a maximum count of 1390 pollen/cu meter of air/hour on 20th of March, while in 2006, it accounted for 75% of the total pollen-count with a maximum count of 1430 pollen/cu meter of air/hour on 10th of March. in fall Season of 2005, Cannabis sativa produced maximum pollen counts of 85 pollens/cu meter of air/hr on 18th of August, while in 2006

  13. chemical and microbiological assessment of surface water samples ...

    African Journals Online (AJOL)

    PROF EKWUEME

    The importance of good quality water cannot be over emphasized. This is because it is only next to air as a critical sustainer of life therefore it is appropriate to evaluate its quality and quantity. A total number of thirteen water samples were investigated in this study: Nine samples from different surface water bodies, two ...

  14. Chemical and microbiological assessment of surface water samples ...

    African Journals Online (AJOL)

    The importance of good quality water cannot be over emphasized. This is because it is only next to air as a critical sustainer of life therefore it is appropriate to evaluate its quality and quantity. A total number of thirteen water samples were investigated in this study: Nine samples from different surface water bodies, two ...

  15. Pollen and non-pollen palynomorphs from the Early Neolithic settlement of La Draga (Girona, Spain)

    NARCIS (Netherlands)

    Revelles, J.; Burjachs, F.; van Geel, B.

    2016-01-01

    Pollen and non-pollen palynomorphs (NPP) from the Early Neolithic settlement of La Draga have provided new palaeoenvironmental data concerning the establishment of the first farming societies in NE Iberian Peninsula. The analysis of samples from the archaeological profiles allowed the comprehension

  16. Pollen features of hazelnut (Corylus avellana L. from different habitats

    Directory of Open Access Journals (Sweden)

    Natalia Nikolaieva

    2014-04-01

    Full Text Available The aim of this work was to study general morphological characteristics of pollen grains of Corylus avellana L. Seven samples of pollen were investigated. Samples were collected from different habitats in Ukraine – from botanical gardens (Kyiv, Kamianets-Podilskyi and natural habitats (Kyiv region, Kamianets-Podilskyi, and Sumy region. We studied such morphological traits of pollen grains as length of polar and equatorial axes, diameter of pores, and shape of the pollen grain (elongation index. Analysis of morphological characters of pollen was carried out using electron microscope. Comparison of data was performed with the data of the base polleninfo.org. During research the differences in these parameters were marked. Pollen grains of C. avellana are generally isopolar, from suboblate to oblate or oblate-spheroidal, and contain 3 pores. The article contains an attempt to explain the size variations noted for the pollen collected from different habitats.

  17. A Geostatistical Approach to Indoor Surface Sampling Strategies

    DEFF Research Database (Denmark)

    Schneider, Thomas; Petersen, Ole Holm; Nielsen, Allan Aasbjerg

    1990-01-01

    using the global information. Then methods for choosing a proper sampling area for a single sample of dust on a table are given. The global contamination of an object is determined by a maximum likelihood estimator. Finally, it is shown how specified experimental goals can be included to determine......Particulate surface contamination is of concern in production industries such as food processing, aerospace, electronics and semiconductor manufacturing. There is also an increased awareness that surface contamination should be monitored in industrial hygiene surveys. A conceptual and theoretical...... framework for designing sampling strategies is thus developed. The distribution and spatial correlation of surface contamination can be characterized using concepts from geostatistical science, where spatial applications of statistics is most developed. The theory is summarized and particulate surface...

  18. Adaptive maximal poisson-disk sampling on surfaces

    KAUST Repository

    Yan, Dongming

    2012-01-01

    In this paper, we study the generation of maximal Poisson-disk sets with varying radii on surfaces. Based on the concepts of power diagram and regular triangulation, we present a geometric analysis of gaps in such disk sets on surfaces, which is the key ingredient of the adaptive maximal Poisson-disk sampling framework. Moreover, we adapt the presented sampling framework for remeshing applications. Several novel and efficient operators are developed for improving the sampling/meshing quality over the state-of-theart. © 2012 ACM.

  19. Horse chestnut pollen quality

    Directory of Open Access Journals (Sweden)

    Ćalić Dušica

    2017-01-01

    Full Text Available Pollen quality of horse chestnut, expressed as pollen productivity, viability and germination was studied. Anthers of horse chestnut genotypes had pollen production from 3.66 to 5.06 x 103 pollen grains per anther, depending of genotype. Also, pollen of horse chestnut Ah1-Ah4 genotypes showed different viability (from 56 to 68%, after staining with fluorescein diacetate. Pollen germination of Ah1-Ah4 genotypes varied from 50-66% on basic medium. Inclusion of polyethylene glycol-PEG from 10%, 15% and 20% v/w increased pollen germination. The best results were achieved on medium with the largest PEG concentration. On these medium 76-91% pollen grains were germinated, depending of genotype. The best pollen quality, for all tested parameters, had genotype Ah2. Knowledge about morphology, production, viability, in vitro germination, tube growth as well as pollen: ovule ratio can be of great importance for future pollen biology studies. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. 173015

  20. Climate warming and the decline of Taxus airborne pollen in urban pollen rain (Emilia Romagna, northern Italy).

    Science.gov (United States)

    Mercuri, A M; Torri, P; Casini, E; Olmi, L

    2013-01-01

    Woody plant performance in a changing global environment has always been at the centre of palaeoenvironmental and long-term climate reconstructions carried out by means of pollen analysis. In Mediterranean regions, Taxus constitutes the highest percentage in past pollen diagrams from cold or cool periods, and therefore it is generally considered a good index to infer climate features from past records. However, a comparison of these inferences with the true current trends in pollen production has not been attemped until now. This study reports the decline of airborne pollen of Taxus observed in Emilia Romagna, a region of northern Italy, during the period 1990-2007. Phenological observations on four male specimens and microscopic examination of fresh pollen were made in order to check Taxus flowering time and pollen morphology. Airborne pollen was monitored through continuous sampling with a Hirst volumetric sampler. In the 18-year long period of investigation, Taxus pollen production has decreased, while total woody pollen abundance in air has increased. The trend of the Taxus pollen season shows a delay at the beginning, a shortening of the pollen period, and an advance of the end of the pollen season. This was interpreted as a response to climate warming. In particular, Taxus follows the behaviour of winter-flowering plants, and therefore earlier pollination is favoured at low autumn temperatures, while late pollination occurs more often, most likely after warm autumn temperatures. © 2012 German Botanical Society and The Royal Botanical Society of the Netherlands.

  1. Pollen sources in the Bojanów forest complex identified on honeybee pollen load by microscopic analysis

    Directory of Open Access Journals (Sweden)

    Ernest Stawiarz

    2017-11-01

    Full Text Available The aim of this study was to determine sources of pollen for the honeybee in the Bojanów forest complex, Nowa Dęba Forest District (southeastern Poland. Sampling of pollen loads from bees extended from the beginning of May until the end of September 2016 and was carried out at 7-day intervals using pollen traps mounted at the entrance of beehives. A total of 73 pollen load samples were collected from the study area. Fifty-nine taxa from 31 plant families were identified in the analyzed material. From 4 to 21 taxa (average 9.5 were recorded in one sample. The pollen of Brassicaceae (“others”, Taraxacum type, Solidago type, and Rumex had the highest frequency in the pollen loads examined. Apart from these four taxa, pollen grains of Rubus type, Poaceae (“others”, Calluna, Fagopyrum, Trifolium repens s. l., Phacelia, Aster type, Melampyrum, Quercus, Cornus, and Veronica were recorded in the dominant pollen group. The forest habitat taxa that provided pollen rewards to honeybees in the Bojanów forest complex were the following: Rubus, Calluna, Prunus, Tilia, Frangula alnus, Pinus, Quercus, Cornus, Robinia pseudoacacia, Salix, and Vaccinium. Apart from forest vegetation, the species from meadows and wastelands adjacent to this forest complex, represented by Taraxacum, Rumex, Plantago, Poaceae, Trifolium repens, and Solidago, proved to be an important source of pollen. The study indicates that forest communities are a valuable source of pollen for pollinating insects from early spring through to late fall.

  2. Effects of XPS operational parameters on investigated sample surfaces

    International Nuclear Information System (INIS)

    Mrad, O.; Ismail, I.

    2013-04-01

    In this work, we studied the effects of the operating conditions of the xray photoelectron spectroscopy analysis technique (XPS) on the investigated samples. Firstly, the performances of the whole system have been verified as well as the accuracy of the analysis. Afterwards, the problem of the analysis of insulating samples caused by the charge buildup on the surface has been studied. The use of low-energy electron beam (<100 eV) to compensate the surface charge has been applied. The effect of X-ray on the samples have been assessed and was found to be nondestructive within the analysis time. The effect of low- and high-energy electron beams on the sample surface have been investigated. Highenergy electrons were found to have destructive effect on organic samples. The sample heating procedure has been tested and its effect on the chemical stat of the surface was followed. Finally, the ion source was used to determine the elements distribution and the chemical stat of different depths of the sample. A method has been proposed to determine these depths (author).

  3. Analysis of the Touch-And-Go Surface Sampling Concept for Comet Sample Return Missions

    Science.gov (United States)

    Mandic, Milan; Acikmese, Behcet; Bayard, David S.; Blackmore, Lars

    2012-01-01

    This paper studies the Touch-and-Go (TAG) concept for enabling a spacecraft to take a sample from the surface of a small primitive body, such as an asteroid or comet. The idea behind the TAG concept is to let the spacecraft descend to the surface, make contact with the surface for several seconds, and then ascend to a safe location. Sampling would be accomplished by an end-effector that is active during the few seconds of surface contact. The TAG event is one of the most critical events in a primitive body sample-return mission. The purpose of this study is to evaluate the dynamic behavior of a representative spacecraft during the TAG event, i.e., immediately prior, during, and after surface contact of the sampler. The study evaluates the sample-collection performance of the proposed sampling end-effector, in this case a brushwheel sampler, while acquiring material from the surface during the contact. A main result of the study is a guidance and control (G&C) validation of the overall TAG concept, in addition to specific contributions to demonstrating the effectiveness of using nonlinear clutch mechanisms in the sampling arm joints, and increasing the length of the sampling arms to improve robustness.

  4. Dual function of novel pollen coat (surface proteins: IgE-binding capacity and proteolytic activity disrupting the airway epithelial barrier.

    Directory of Open Access Journals (Sweden)

    Mohamed Elfatih H Bashir

    Full Text Available BACKGROUND: The pollen coat is the first structure of the pollen to encounter the mucosal immune system upon inhalation. Prior characterizations of pollen allergens have focused on water-soluble, cytoplasmic proteins, but have overlooked much of the extracellular pollen coat. Due to washing with organic solvents when prepared, these pollen coat proteins are typically absent from commercial standardized allergenic extracts (i.e., "de-fatted", and, as a result, their involvement in allergy has not been explored. METHODOLOGY/PRINCIPAL FINDINGS: Using a unique approach to search for pollen allergenic proteins residing in the pollen coat, we employed transmission electron microscopy (TEM to assess the impact of organic solvents on the structural integrity of the pollen coat. TEM results indicated that de-fatting of Cynodon dactylon (Bermuda grass pollen (BGP by use of organic solvents altered the structural integrity of the pollen coat. The novel IgE-binding proteins of the BGP coat include a cysteine protease (CP and endoxylanase (EXY. The full-length cDNA that encodes the novel IgE-reactive CP was cloned from floral RNA. The EXY and CP were purified to homogeneity and tested for IgE reactivity. The CP from the BGP coat increased the permeability of human airway epithelial cells, caused a clear concentration-dependent detachment of cells, and damaged their barrier integrity. CONCLUSIONS/SIGNIFICANCE: Using an immunoproteomics approach, novel allergenic proteins of the BGP coat were identified. These proteins represent a class of novel dual-function proteins residing on the coat of the pollen grain that have IgE-binding capacity and proteolytic activity, which disrupts the integrity of the airway epithelial barrier. The identification of pollen coat allergens might explain the IgE-negative response to available skin-prick-testing proteins in patients who have positive symptoms. Further study of the role of these pollen coat proteins in allergic

  5. Ultrastructure of Withania Somnifera (L.) Dunal pollen grains

    International Nuclear Information System (INIS)

    Alwadie, H.M.

    2002-01-01

    Light, scanning and transmission electron microscopy were used to study the morphology and ultrastructure of Withania Somnifera (L.) Dunall pollen grains. Light microscopic examination revealed that the pollen grains are tri- or tetrazonocoplate grains, approximately as long as broad, measuring 29-um. Scanning electron microscopic observation showed that surface sculpturing of the pollen is scarbate-granulate. Ultrathin sections as examined by transmission electron microscope showed that the pollen contained numerous starch grains, lipid droplets, endoplasmic reticulum and vesicles of dictyosomes. Two layers of the pollen wall were also distinguished, the outer wall (exine) divided into ektexine and endexine as well as the inner layer (intine). The nutritive values of Withania pollen are discussed. The importance of studying the ultrastructure of pollen grains as a new tool in palynology is also discussed. (author)

  6. Intelligent sampling for the measurement of structured surfaces

    International Nuclear Information System (INIS)

    Wang, J; Jiang, X; Blunt, L A; Scott, P J; Leach, R K

    2012-01-01

    Uniform sampling in metrology has known drawbacks such as coherent spectral aliasing and a lack of efficiency in terms of measuring time and data storage. The requirement for intelligent sampling strategies has been outlined over recent years, particularly where the measurement of structured surfaces is concerned. Most of the present research on intelligent sampling has focused on dimensional metrology using coordinate-measuring machines with little reported on the area of surface metrology. In the research reported here, potential intelligent sampling strategies for surface topography measurement of structured surfaces are investigated by using numerical simulation and experimental verification. The methods include the jittered uniform method, low-discrepancy pattern sampling and several adaptive methods which originate from computer graphics, coordinate metrology and previous research by the authors. By combining the use of advanced reconstruction methods and feature-based characterization techniques, the measurement performance of the sampling methods is studied using case studies. The advantages, stability and feasibility of these techniques for practical measurements are discussed. (paper)

  7. Capacity constrained blue-noise sampling on surfaces

    KAUST Repository

    Zhang, Sen

    2015-11-27

    We present a novel method for high-quality blue-noise sampling on mesh surfaces with prescribed cell-sizes for the underlying tessellation (capacity constraint). Unlike the previous surface sampling approach that only uses capacity constraints as a regularizer of the Centroidal Voronoi Tessellation (CVT) energy, our approach enforces an exact capacity constraint using the restricted power tessellation on surfaces. Our approach is a generalization of the previous 2D blue noise sampling technique using an interleaving optimization framework. We further extend this framework to handle multi-capacity constraints. We compare our approach with several state-of-the-art methods and demonstrate that our results are superior to previous work in terms of preserving the capacity constraints.

  8. Monitoring, modelling and forecasting of the pollen season

    DEFF Research Database (Denmark)

    Scheifinger, Helfried; Belmonte, Jordina; Buters, Jeroen

    2013-01-01

    The section about monitoring covers the development of phenological networks, remote sensing of the season cycle of the vegetation, the emergence of the science of aerobiology and, more specifically, aeropalynology, pollen sampling instruments, pollen counting techniques, applications...... of aeropalynology in agriculture and the European Pollen Information System. Three data sources are directly related with aeropalynology: phenological observations, pollen counts and remote sensing of the vegetation activity. The main future challenge is the assimilation of these data streams into numerical pollen...... forecast systems. Over the last decades consistent monitoring efforts of various national networks have created a wealth of pollen concentration time series. These constitute a nearly untouched treasure, which is still to be exploited to investigate questions concerning pollen emission, transport...

  9. Pollen structure and function in caesalpinioid legumes.

    Science.gov (United States)

    Banks, Hannah; Rudall, Paula J

    2016-03-01

    A diverse range of pollen morphologies occurs within the large, paraphyletic legume subfamily Caesalpinioideae, especially among early-branching lineages. Previous studies have hypothesized an association between surface ornamentation and pollination syndrome or other aspects of pollen function such as desiccation tolerance and adaptations to accommodate volume changes. We reviewed caesalpinioid pollen morphology using light microscopy, scanning and transmission electron microscopy, in combination with a literature survey of pollination vectors. Pollen structural diversity is greatest in the early-branching tribes Cercideae and Detarieae, whereas Cassieae and Caesalpinieae are relatively low in pollen diversity. Functional structures to counter desiccation include opercula (lids) covering apertures and reduced aperture size. Structures preventing wall rupture during dehydration and rehydration include different forms of colpi (syncolpi, parasyncolpi, pseudocolpi), striate supratectal ornamentation, and columellate or granular wall structures that resist tensile or compressive forces respectively. Specialized aperture structures (Zwischenkörper) may be advantageous for efficient germination of the pollen tube. In Detarieae and Cercideae in particular, there is potential to utilize pollen characters to estimate pollination systems where these are unknown. Supratectal verrucae and gemmae have apparently evolved iteratively in Cercideae and Detarieae. At the species level, there is a potential correlation between striate/verrucate patterns and vertebrate pollination. © 2016 Botanical Society of America.

  10. Evaluation of surface sampling method performance for Bacillus Spores on clean and dirty outdoor surfaces.

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, Mollye C.; Einfeld, Wayne; Boucher, Raymond M.; Brown, Gary Stephen; Tezak, Matthew Stephen

    2011-06-01

    Recovery of Bacillus atrophaeous spores from grime-treated and clean surfaces was measured in a controlled chamber study to assess sampling method performance. Outdoor surfaces investigated by wipe and vacuum sampling methods included stainless steel, glass, marble and concrete. Bacillus atrophaeous spores were used as a surrogate for Bacillus anthracis spores in this study designed to assess whether grime-coated surfaces significantly affected surface sampling method performance when compared to clean surfaces. A series of chamber tests were carried out in which known amounts of spores were allowed to gravitationally settle onto both clean and dirty surfaces. Reference coupons were co-located with test coupons in all chamber experiments to provide a quantitative measure of initial surface concentrations of spores on all surfaces, thereby allowing sampling recovery calculations. Results from these tests, carried out under both low and high humidity conditions, show that spore recovery from grime-coated surfaces is the same as or better than spore recovery from clean surfaces. Statistically significant differences between method performance for grime-coated and clean surfaces were observed in only about half of the chamber tests conducted.

  11. EML Surface Air Sampling Program, 1990--1993 data

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, R.J.; Sanderson, C.G.; Kada, J.

    1995-11-01

    Measurements of the concentrations of specific atmospheric radionuclides in air filter samples collected for the Environmental Measurements Laboratory`s Surface Air Sampling Program (SASP) during 1990--1993, with the exception of April 1993, indicate that anthropogenic radionuclides, in both hemispheres, were at or below the lower limits of detection for the sampling and analytical techniques that were used to collect and measure them. The occasional detection of {sup 137}Cs in some air filter samples may have resulted from resuspension of previously deposited debris. Following the April 6, 1993 accident and release of radionuclides into the atmosphere at a reprocessing plant in the Tomsk-7 military nuclear complex located 16 km north of the Siberian city of Tomsk, Russia, weekly air filter samples from Barrow, Alaska; Thule, Greenland and Moosonee, Canada were selected for special analyses. The naturally occurring radioisotopes that the authors measure, {sup 7}Be and {sup 210}Pb, continue to be detected in most air filter samples. Variations in the annual mean concentrations of {sup 7}Be at many of the sites appear to result primarily from changes in the atmospheric production rate of this cosmogenic radionuclide. Short-term variations in the concentrations of {sup 7}Be and {sup 210}Pb continued to be observed at many sites at which weekly air filter samples were analyzed. The monthly gross gamma-ray activity and the monthly mean surface air concentrations of {sup 7}Be, {sup 95}Zr, {sup 137}Cs, {sup 144}Ce, and {sup 210}Pb measured at sampling sites in SASP during 1990--1993 are presented. The weekly mean surface air concentrations of {sup 7}Be, {sup 95}Zr, {sup 137}Cs, {sup 144}Ce, and {sup 210}Pb for samples collected during 1990--1993 are given for 17 sites.

  12. EML Surface Air Sampling Program, 1990--1993 data

    International Nuclear Information System (INIS)

    Larsen, R.J.; Sanderson, C.G.; Kada, J.

    1995-11-01

    Measurements of the concentrations of specific atmospheric radionuclides in air filter samples collected for the Environmental Measurements Laboratory's Surface Air Sampling Program (SASP) during 1990--1993, with the exception of April 1993, indicate that anthropogenic radionuclides, in both hemispheres, were at or below the lower limits of detection for the sampling and analytical techniques that were used to collect and measure them. The occasional detection of 137 Cs in some air filter samples may have resulted from resuspension of previously deposited debris. Following the April 6, 1993 accident and release of radionuclides into the atmosphere at a reprocessing plant in the Tomsk-7 military nuclear complex located 16 km north of the Siberian city of Tomsk, Russia, weekly air filter samples from Barrow, Alaska; Thule, Greenland and Moosonee, Canada were selected for special analyses. The naturally occurring radioisotopes that the authors measure, 7 Be and 210 Pb, continue to be detected in most air filter samples. Variations in the annual mean concentrations of 7 Be at many of the sites appear to result primarily from changes in the atmospheric production rate of this cosmogenic radionuclide. Short-term variations in the concentrations of 7 Be and 210 Pb continued to be observed at many sites at which weekly air filter samples were analyzed. The monthly gross gamma-ray activity and the monthly mean surface air concentrations of 7 Be, 95 Zr, 137 Cs, 144 Ce, and 210 Pb measured at sampling sites in SASP during 1990--1993 are presented. The weekly mean surface air concentrations of 7 Be, 95 Zr, 137 Cs, 144 Ce, and 210 Pb for samples collected during 1990--1993 are given for 17 sites

  13. Diurnal variations of airborne pollen concentration and the effect of ambient temperature in three sites of Mexico City.

    Science.gov (United States)

    Ríos, B; Torres-Jardón, R; Ramírez-Arriaga, E; Martínez-Bernal, A; Rosas, I

    2016-05-01

    Pollen is an important cause of allergic respiratory ailments in the Mexico City Metropolitan Area (MCMA). However, very little is known if ambient air temperature correlates with the early blooming of plants observed in other urban areas around the world. A research study was conducted during the dry season of 2012-2013 at three representative sites of the MCMA with different urban characteristics with the aim to understand the relationships between the profusion and diversity of pollen against temperature and other meteorological variables and degree of urbanization. Pollen samples were collected using a Hirst-type trap sampler in the sites: Merced (highly urbanized), Iztapalapa (medium-high urbanized) and Coyoacan (moderately urbanized). Urbanization levels were determined using a composite index based on population density, proportion of surface covered by construction and asphalt, and urban heat island intensity. A set of representative pollen sampling tapes were assayed under a light microscope at magnification of ×1,000 and converted to grains per cubic meter. The most representative pollen types found in the three sites were, regardless of urbanization levels were: Fraxinus, Cupressaceae/Taxodiaceae, Casuarina, Alnus, Myrtaceae, and Pinus. Total pollen concentration was greatest in the moderately urbanized area, although earlier blooming took place at the highly urbanized zone. Total pollen concentration in the medium-high urbanized site has the lowest because the green areas in this zone of MCMA are few. In a diurnal basis, the most abundant pollen types peaked near midday or in the afternoon evening at the three sites. A Spearman test showed a positive correlation among bihourly pollen concentrations, temperature and relative humidity in all sites, but wind speed just correlated in Iztapalapa and Coyoacan. The results obtained suggest that Urban Heat Island Intensity can disturb flowering periods and pollen concentrations, largely in the highly urbanized

  14. Lilium spp. pollen in China (Liliaceae: taxonomic and phylogenetic implications and pollen evolution related to environmental conditions.

    Directory of Open Access Journals (Sweden)

    Yun-peng Du

    Full Text Available Recent molecular and karyologic studies have significantly modified delimitation of Lilium. However, despite the importance of pollen evolution in the genus comprehensive studies with electron microscopy and evaluation of pollen evolution are lacking. Therefore, we studied pollen morphology in a sample of 65 individuals from 37 taxa covering all the sections distributed in the world, using scanning electron microscopy. Our collection of 49 individuals from 21 taxa covering all five sections in China was also included in the database. We found pollen tetrads in L. bakerianum. Based on present and previous studies, our results suggest that pollen from L. formosanum should be classified as a new type, Formosanum. Combined with morphological and molecular evidence, pollen sculpture patterns appear to reflect phylogenetic relationships and are useful for species or subsection delimitation. Based on a comprehensive survey and correlation with potential functional implications, we propose the following hypothesis: evolution of an exine sculpture shows pollen type trends from Martagon → Callose → Concolor → Formosanum. The evolutionary trend regarding pollen sculpture and size could be related to selective pressure to adapt to environmental conditions. Pollen size and shape showed a significantly positive correlation with annual precipitation, and smaller pollen grains appear to adapt better in habitats with extreme conditions. Evolution trends in exine sculpture do not appear to be definitively correlated with pollen size and shape.

  15. Lilium spp. pollen in China (Liliaceae): taxonomic and phylogenetic implications and pollen evolution related to environmental conditions.

    Science.gov (United States)

    Du, Yun-peng; Wei, Chi; Wang, Zhong-xuan; Li, Shuang; He, Heng-bin; Jia, Gui-xia

    2014-01-01

    Recent molecular and karyologic studies have significantly modified delimitation of Lilium. However, despite the importance of pollen evolution in the genus comprehensive studies with electron microscopy and evaluation of pollen evolution are lacking. Therefore, we studied pollen morphology in a sample of 65 individuals from 37 taxa covering all the sections distributed in the world, using scanning electron microscopy. Our collection of 49 individuals from 21 taxa covering all five sections in China was also included in the database. We found pollen tetrads in L. bakerianum. Based on present and previous studies, our results suggest that pollen from L. formosanum should be classified as a new type, Formosanum. Combined with morphological and molecular evidence, pollen sculpture patterns appear to reflect phylogenetic relationships and are useful for species or subsection delimitation. Based on a comprehensive survey and correlation with potential functional implications, we propose the following hypothesis: evolution of an exine sculpture shows pollen type trends from Martagon → Callose → Concolor → Formosanum. The evolutionary trend regarding pollen sculpture and size could be related to selective pressure to adapt to environmental conditions. Pollen size and shape showed a significantly positive correlation with annual precipitation, and smaller pollen grains appear to adapt better in habitats with extreme conditions. Evolution trends in exine sculpture do not appear to be definitively correlated with pollen size and shape.

  16. Rapid extraction and assay of uranium from environmental surface samples

    Energy Technology Data Exchange (ETDEWEB)

    Barrett, Christopher A.; Chouyyok, Wilaiwan; Speakman, Robert J.; Olsen, Khris B.; Addleman, Raymond Shane

    2017-10-01

    Extraction methods enabling faster removal and concentration of uranium compounds for improved trace and low-level assay are demonstrated for standard surface sampling material in support of nuclear safeguards efforts, health monitoring, and other nuclear analysis applications. A key problem with the existing surface sampling swipes is the requirement for complete digestion of sample and sampling matrix. This is a time-consuming and labour-intensive process that limits laboratory throughput, elevates costs, and increases background levels. Various extraction methods are explored for their potential to quickly and efficiently remove different chemical forms of uranium from standard surface sampling material. A combination of carbonate and peroxide solutions is shown to give the most rapid and complete form of uranyl compound extraction and dissolution. This rapid extraction process is demonstrated to be compatible with standard inductive coupled plasma mass spectrometry methods for uranium isotopic assay as well as screening techniques such as x-ray fluorescence. The general approach described has application beyond uranium to other analytes of nuclear forensic interest (e.g., rare earth elements and plutonium) as well as heavy metals for environmental and industrial hygiene monitoring.

  17. Spiraling Edge: Fast Surface Reconstruction from Partially Organized Sample Points

    Energy Technology Data Exchange (ETDEWEB)

    Angel, E.; Crossno, P.

    1999-01-06

    Many applications produce three-dimensional points that must be further processed to generate a surface. Surface reconstruction algorithms that start with a set of unorganized points are extremely time-consuming. Often, however, points are generated such that there is additional information available to the reconstruction algorithm. We present a specialized algorithm for surface reconstruction that is three orders of magnitude faster than algorithms for the general case. In addition to sample point locations, our algorithm starts with normal information and knowledge of each point's neighbors. Our algorithm produces a localized approximation to the surface by creating a star-shaped triangulation between a point and a subset of its nearest neighbors. This surface patch is extended by locally triangulating each of the points along the edge of the patch. As each edge point is triangulated, it is removed from the edge and new edge points along the patch's edge are inserted in its place. The updated edge spirals out over the surface until the edge encounters a surface boundary and stops growing in that direction, or until the edge reduces to a small hole that fills itself in.

  18. Spiraling Edge: Fast Surface Reconstruction from Partially Organized Sample Points

    Energy Technology Data Exchange (ETDEWEB)

    Angel, Edward; Crossno, Patricia

    1999-07-12

    Many applications produce three-dimensional points that must be further processed to generate a surface. Surface reconstruction algorithms that start with a set of unorganized points are extremely time-consuming. Sometimes, however, points are generated such that there is additional information available to the reconstruction algorithm. We present Spiraling Edge, a specialized algorithm for surface reconstruction that is three orders of magnitude faster than algorithms for the general case. In addition to sample point locations, our algorithm starts with normal information and knowledge of each point's neighbors. Our algorithm produces a localized approximation to the surface by creating a star-shaped triangulation between a point and a subset of its nearest neighbors. This surface patch is extended by locally triangulating each of the points along the edge of the patch. As each edge point is triangulated, it is removed from the edge and new edge points along the patch's edge are inserted in its place. The updated edge spirals out over the surface until the edge encounters a surface boundary and stops growing in that direction, or until the edge reduces to a small hole that is filled by the final triangle.

  19. Espectro polínico de amostras de mel de Apis mellifera L., coletadas na Bahia Pollen spectrum of samples of Apis mellifera L., honey collected in Bahia State, Brazil

    Directory of Open Access Journals (Sweden)

    AUGUSTA CAROLINA DE CAMARGO CARMELLO MORETI

    2000-01-01

    Full Text Available O espectro polínico encontrado em amostras de mel provenientes de seis municípios do Estado da Bahia foi analisado com o objetivo de contribuir para o conhecimento da flora visitada por Apis mellifera L. 1758 (Hymenoptera: ApidaeA identificação dos tipos polínicos foi feita por meio de literatura especializada e de informações de campo. Foram encontrados 43 tipos de pólen, sendo consideradas como dominantes as espécies Eucalyptus sp. (Myrtaceae, Mimosa verrucosa Benth. (Mimosaceae, M. scabrella Benth. (Mimosaceae e Bauhinia sp. (Caesalpiniaceae. Os tipos acessórios foram Alternanthera ficoidea R.Br. (Amaranthaceae, tipo Compositae (Asteraceae e Cecropia sp. (Moraceae. Destacou-se a participação de Mimosa sp. (Mimosaceae e de outras espécies silvestres na composição dos méis nos municípios considerados, registrando-se ainda a espécie Eucalyptus sp. (Myrtaceae como uma das principais fontes de alimento das abelhas dessa região.Pollen spectrum found in honey samples from six localities of Bahia State, Brazil, was analyzed with the objective to contribute for the knowledge of the plants used by Apis mellifera L., 1758 (Hymenoptera: Apidae. The identification of the pollen types was made by specialized literature and by field information. Two hundred pollen grains were studied in order to determine the percentage and the occurrence of each type. Forty three pollen types were identified, being considered as the predominant types Eucalyptus sp. (Myrtaceae, Mimosa verrucosa Benth. (Mimosaceae, M. scabrella Benth. (Mimosaceae and Bauhinia sp. (Caesalpiniaceae. The accessory pollen types were Alternanthera ficoidea R.Br. (Amaranthaceae, Compositae type (Asteraceae and Cecropia sp. (Moraceae. It is intense the participation of Mimosa sp. (Mimosaceae and other wild species in the honey composition of the six localities considered. Eucalyptus sp. (Myrtaceae is one of the dominant sources of bee food in some regions of Bahia State.

  20. Applications of Raman and Surface-Enhanced Raman Scattering to the Analysis of Eukaryotic Samples

    Science.gov (United States)

    Schulte, Franziska; Joseph, Virginia; Panne, Ulrich; Kneipp, Janina

    In this chapter, we discuss Raman scattering and surface-enhanced Raman scattering (SERS) for the analysis of cellular samples of plant and animal origin which are several tens to hundreds of microns in size. As was shown in the past several years, the favorable properties of noble metal nanostructures can be used to generate SERS signals in very complex biological samples such as cells, and result in an improved sensitivity and spatial resolution. Pollen grains, the physiological containers that produce the male gametes of seed plants, consist of a few vegetative cells and one generative cell, surrounded by a biopolymer shell. Their chemical composition has been a subject of research of plant physiologists, biochemists [1, 2], and lately even materials scientists [3, 4] for various reasons. In spite of a multitude of applied analytical approaches it could not be elucidated in its entirety yet. Animal cells from cell cultures have been a subject of intense studies due to their application in virtually all fields of biomedical research, ranging from studies of basic biological mechanisms to models for pharmaceutical and diagnostic research. Many aspects of all kinds of cellular processes including signalling, transport, and gene regulation have been elucidated, but many more facts about cell biology will need to be understood in order to efficiently address issues such as cancer, viral infection or genetic disorder. Using the information from spectroscopic methods, in particular combining normal Raman spectroscopy and SERS may open up new perspectives on cellular biochemistry. New sensitive Raman-based tools are being developed for the biochemical analysis of cellular processes [5-8].

  1. Sampling free energy surfaces as slices by combining umbrella sampling and metadynamics.

    Science.gov (United States)

    Awasthi, Shalini; Kapil, Venkat; Nair, Nisanth N

    2016-06-15

    Metadynamics (MTD) is a very powerful technique to sample high-dimensional free energy landscapes, and due to its self-guiding property, the method has been successful in studying complex reactions and conformational changes. MTD sampling is based on filling the free energy basins by biasing potentials and thus for cases with flat, broad, and unbound free energy wells, the computational time to sample them becomes very large. To alleviate this problem, we combine the standard Umbrella Sampling (US) technique with MTD to sample orthogonal collective variables (CVs) in a simultaneous way. Within this scheme, we construct the equilibrium distribution of CVs from biased distributions obtained from independent MTD simulations with umbrella potentials. Reweighting is carried out by a procedure that combines US reweighting and Tiwary-Parrinello MTD reweighting within the Weighted Histogram Analysis Method (WHAM). The approach is ideal for a controlled sampling of a CV in a MTD simulation, making it computationally efficient in sampling flat, broad, and unbound free energy surfaces. This technique also allows for a distributed sampling of a high-dimensional free energy surface, further increasing the computational efficiency in sampling. We demonstrate the application of this technique in sampling high-dimensional surface for various chemical reactions using ab initio and QM/MM hybrid molecular dynamics simulations. Further, to carry out MTD bias reweighting for computing forward reaction barriers in ab initio or QM/MM simulations, we propose a computationally affordable approach that does not require recrossing trajectories. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  2. INTERACTION OF IMPULSE ELECTROMAGNETIC FIELDS WITH SURFACES OF METAL SAMPLES

    Directory of Open Access Journals (Sweden)

    V. V. Pavliouchenko

    2006-01-01

    Full Text Available Measurements of maximum tangential component of magnetic intensity Hτm have been carried out in the paper. The measurements have been taken on the surface of metal samples according to time of single current pulse rise in the form of semi-sinusoid of a linear current wire. Measurements have been made with the purpose to determine a value of the component according to thickness of samples made of aluminium.Temporary resolution ranges of electric and magnetic properties and defects of sample continuity along the depth have been found.Empirical formulae of dependence Hτm on sample thickness have been derived and their relation with efficient depth penetration of magnetic field into metal has been found.

  3. Integration for Airborne Dust Prediction Systems and Vegetation Phenology to Track Pollen for Asthma Alerts in Public Health Decision Support Systems

    Science.gov (United States)

    Luvall, J. C.; Sprigg, W. A.; Nickovic, S.; Huete, A.; Budge, A.; Flowers, L.

    2008-01-01

    The objective of the program is to assess the feasibility of combining a dust transport model with MODIS derived phenology to study pollen transport for integration with a public health decision support system. The use of pollen information has specifically be identified as a critical need by the New Mexico State Health department for inclusion in the Environmental Public Health Tracking (EPHT) program. Material and methods: Pollen can be transported great distances. Local observations of plan phenology may be consistent with the timing and source of pollen collected by pollen sampling instruments. The Dust REgional Atmospheric Model (DREAM) is an integrated modeling system designed to accurately describe the dust cycle in the atmosphere. The dust modules of the entire system incorporate the state of the art parameterization of all the major phases of the atmospheric dust life such as production, diffusion, advection, and removal. These modules also include effects of the particles size distribution on aerosol dispersion. The model was modified to use pollen sources instead of dust. Pollen release was estimated based on satellite-derived phenology of key plan species and vegetation communities. The MODIS surface reflectance product (MOD09) provided information on the start of the plant growing season, growth stage, and pollen release. The resulting deterministic model is useful for predicting and simulating pollen emission and downwind concentration to study details of phenology and meteorology and their dependencies. The proposed linkage in this project provided critical information on the location timing and modeled transport of pollen directly to the EPHT> This information is useful to support the centers for disease control and prevention (CDC)'s National EPHT and the state of New Mexico environmental public health decision support for asthma and allergies alerts.

  4. Adventitious Carbon on Primary Sample Containment Metal Surfaces

    Science.gov (United States)

    Calaway, M. J.; Fries, M. D.

    2015-01-01

    Future missions that return astromaterials with trace carbonaceous signatures will require strict protocols for reducing and controlling terrestrial carbon contamination. Adventitious carbon (AC) on primary sample containers and related hardware is an important source of that contamination. AC is a thin film layer or heterogeneously dispersed carbonaceous material that naturally accrues from the environment on the surface of atmospheric exposed metal parts. To test basic cleaning techniques for AC control, metal surfaces commonly used for flight hardware and curating astromaterials at JSC were cleaned using a basic cleaning protocol and characterized for AC residue. Two electropolished stainless steel 316L (SS- 316L) and two Al 6061 (Al-6061) test coupons (2.5 cm diameter by 0.3 cm thick) were subjected to precision cleaning in the JSC Genesis ISO class 4 cleanroom Precision Cleaning Laboratory. Afterwards, the samples were analyzed by X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy.

  5. Quantitative DNA Analyses for Airborne Birch Pollen.

    Directory of Open Access Journals (Sweden)

    Isabell Müller-Germann

    Full Text Available Birch trees produce large amounts of highly allergenic pollen grains that are distributed by wind and impact human health by causing seasonal hay fever, pollen-related asthma, and other allergic diseases. Traditionally, pollen forecasts are based on conventional microscopic counting techniques that are labor-intensive and limited in the reliable identification of species. Molecular biological techniques provide an alternative approach that is less labor-intensive and enables identification of any species by its genetic fingerprint. A particularly promising method is quantitative Real-Time polymerase chain reaction (qPCR, which can be used to determine the number of DNA copies and thus pollen grains in air filter samples. During the birch pollination season in 2010 in Mainz, Germany, we collected air filter samples of fine (<3 μm and coarse air particulate matter. These were analyzed by qPCR using two different primer pairs: one for a single-copy gene (BP8 and the other for a multi-copy gene (ITS. The BP8 gene was better suitable for reliable qPCR results, and the qPCR results obtained for coarse particulate matter were well correlated with the birch pollen forecasting results of the regional air quality model COSMO-ART. As expected due to the size of birch pollen grains (~23 μm, the concentration of DNA in fine particulate matter was lower than in the coarse particle fraction. For the ITS region the factor was 64, while for the single-copy gene BP8 only 51. The possible presence of so-called sub-pollen particles in the fine particle fraction is, however, interesting even in low concentrations. These particles are known to be highly allergenic, reach deep into airways and cause often severe health problems. In conclusion, the results of this exploratory study open up the possibility of predicting and quantifying the pollen concentration in the atmosphere more precisely in the future.

  6. Sampling for Beryllium Surface Contamination using Wet, Dry and Alcohol Wipe Sampling

    Energy Technology Data Exchange (ETDEWEB)

    Kerr, Kent [Central Missouri State Univ., Warrensburg, MO (United States)

    2004-12-01

    This research project was conducted at the National Nuclear Security Administration's Kansas City Plant, operated by Honeywell Federal Manufacturing and Technologies, in conjunction with the Safety Sciences Department of Central Missouri State University, to compare relative removal efficiencies of three wipe sampling techniques currently used at Department of Energy facilities. Efficiencies of removal of beryllium contamination from typical painted surfaces were tested by wipe sampling with dry Whatman 42 filter paper, with water-moistened (Ghost Wipe) materials, and by methanol-moistened wipes. Test plates were prepared using 100 mm X 15 mm Pyrex Petri dishes with interior surfaces spray painted with a bond coat primer. To achieve uniform deposition over the test plate surface, 10 ml aliquots of solution containing 1 beryllium and 0.1 ml of metal working fluid were transferred to the test plates and subsequently evaporated. Metal working fluid was added to simulate the slight oiliness common on surfaces in metal working shops where fugitive oil mist accumulates over time. Sixteen test plates for each wipe method (dry, water, and methanol) were processed and sampled using a modification of wiping patterns recommended by OSHA Method 125G. Laboratory and statistical analysis showed that methanol-moistened wipe sampling removed significantly more (about twice as much) beryllium/oil-film surface contamination as water-moistened wipes (p< 0.001), which removed significantly more (about twice as much) residue as dry wipes (p <0.001). Evidence for beryllium sensitization via skin exposure argues in favor of wipe sampling with wetting agents that provide enhanced residue removal efficiency.

  7. Comparison of surface sampling methods for virus recovery from fomites.

    Science.gov (United States)

    Julian, Timothy R; Tamayo, Francisco J; Leckie, James O; Boehm, Alexandria B

    2011-10-01

    The role of fomites in infectious disease transmission relative to other exposure routes is difficult to discern due, in part, to the lack of information on the level and distribution of virus contamination on surfaces. Comparisons of studies intending to fill this gap are difficult because multiple different sampling methods are employed and authors rarely report their method's lower limit of detection. In the present study, we compare a subset of sampling methods identified from a literature review to demonstrate that sampling method significantly influences study outcomes. We then compare a subset of methods identified from the review to determine the most efficient methods for recovering virus from surfaces in a laboratory trial using MS2 bacteriophage as a model virus. Recoveries of infective MS2 and MS2 RNA are determined using both a plaque assay and quantitative reverse transcription-PCR, respectively. We conclude that the method that most effectively recovers virus from nonporous fomites uses polyester-tipped swabs prewetted in either one-quarter-strength Ringer's solution or saline solution. This method recovers a median fraction for infective MS2 of 0.40 and for MS2 RNA of 0.07. Use of the proposed method for virus recovery in future fomite sampling studies would provide opportunities to compare findings across multiple studies.

  8. Quality of durable cookies enriched with rape bee pollen

    Directory of Open Access Journals (Sweden)

    Miriam Solgajová

    2014-03-01

    Full Text Available The objective of this study was to enrich durable cookies with different additions of rape (Brassica napus var. napus bee pollen to increase nutritional properties of cookie samples and to improve technological and sensorial properties as well. Bee pollen is an important raw material due to its nutritional and functional properties. Cookie samples were prepared by substituting wheat flour with rape bee pollen in the amount of 16 % (1 g of bee pollen per cookie and 32 % (2 g of bee pollen per cookie using bee pollen from two localities Lenártovce and Nové Zámky. In baked samples beside sensory properties also chemical parameters and technological parameters of cookies were evaluated. It was found out that with the gradual addition of rape bee pollen the amount of ash content increased and the highest ash content was analysed in variants II and IV (0.71 and 0.77 % using 32 % addition of rape bee pollen. In terms of reducing sugars, addition of bee pollen caused that the content of reducing sugars in the products increased slightly. The highest reducing sugar content was determined in variant II. (24.59 %. On the other hand amount of crude protein the most considerably raised by addition of 2 g of pollen per cookie. The highest content of crude protein was analysed in variants II and IV (8.72 and 9.00 %. From the results of a linear models in which the dependent variables were the ash, crude protein and moisture it was determined the significant effect (p <0.05 only of the pollen addition. In the case of the model with the dependent variable reducing sugars it was found out significant effect (p<0.0001 of pollen addition and locality and their interactions. With the gradual addition of bee pollen values of technological parameters such as diameter and weight of cookies increased and thickness of products decreased. Based on sensory scores using a 9-point Hedonic scale the best sensorial acceptability (7.4 was found in variant I (1 g of bee

  9. Integration of Dust Prediction Systems and Vegetation Phenology to Track Pollen for Asthma Alerts in Public Health

    Science.gov (United States)

    Luvall, Jeffrey C.; Sprigg, W. A.; Huete, A.; Nickovic, S.; Pejanovic, G.; Levetin, E.; Van de water, P.; Myers, O.; Budge, A. M.; Krapfl, H.; hide

    2011-01-01

    Pollen can be transported great distances. Van de Water et. al., 2003 reported Juniperus pollen, a significant aeroallergen was transported 200-600 km. Hence local observations of plant phenology may not be consistent with the timing and source of pollen collected by pollen sampling instruments. The DREAM (Dust REgional Atmospheric Model, Yin 2007) is a verified model for atmospheric dust transport modeling using MODIS data products to identify source regions and quantities of dust (Yin 2007). The use of satellite data products for studying phenology is well documented (White and Nemani 2006). We are modifying the DREAM model to incorporate pollen transport. The linkages already exist with DREAM through PHAiRS (Public Health Applications in remote Sensing) to the public health community. This linkage has the potential to fill this data gap so that health effects of pollen can better be tracked for linkage with health outcome data including asthma, respiratory effects, myocardial infarction, and lost work days. DREAM is based on the SKIRON/Eta modeling system and the Eta/NCEP regional atmospheric model. The dust modules of the entire system incorporate the state of the art parameterizations of all the major phases of the atmospheric dust life such as production, diffusion, advection, and removal. These modules also include effects of the particle size distribution on aerosol dispersion. The dust production mechanism is based on the viscous/turbulent mixing, shear-free convection diffusion, and soil moisture. In addition to these sophisticated mechanisms, very high resolution databases, including elevation, soil properties, and vegetation cover are utilized. The DREAM model was modified to use pollen sources instead of dust (PREAM). Pollen release will be estimated based on satellite-derived phenology of Juniperus spp. communities. The MODIS surface reflectance product (MOD09) will provide information on the start of the plant growing season, growth stage, peak

  10. Protocol for Microplastics Sampling on the Sea Surface and Sample Analysis

    Science.gov (United States)

    Kovač Viršek, Manca; Palatinus, Andreja; Koren, Špela; Peterlin, Monika; Horvat, Petra; Kržan, Andrej

    2016-01-01

    Microplastic pollution in the marine environment is a scientific topic that has received increasing attention over the last decade. The majority of scientific publications address microplastic pollution of the sea surface. The protocol below describes the methodology for sampling, sample preparation, separation and chemical identification of microplastic particles. A manta net fixed on an »A frame« attached to the side of the vessel was used for sampling. Microplastic particles caught in the cod end of the net were separated from samples by visual identification and use of stereomicroscopes. Particles were analyzed for their size using an image analysis program and for their chemical structure using ATR-FTIR and micro FTIR spectroscopy. The described protocol is in line with recommendations for microplastics monitoring published by the Marine Strategy Framework Directive (MSFD) Technical Subgroup on Marine Litter. This written protocol with video guide will support the work of researchers that deal with microplastics monitoring all over the world. PMID:28060297

  11. How honey bees carry pollen

    Science.gov (United States)

    Matherne, Marguerite E.; Anyanwu, Gabriel; Leavey, Jennifer K.; Hu, David L.

    2017-11-01

    Honey bees are the tanker of the skies, carrying thirty percent of their weight in pollen per foraging trip using specialized orifices on their body. How do they manage to hang onto those pesky pollen grains? In this experimental study, we investigate the adhesion force of pollen to the honeybee. To affix pollen to themselves, honey bees form a suspension of pollen in nectar, creating a putty-like pollen basket that is skewered by leg hairs. We use tensile tests to show that the viscous force of the pollen basket is more than ten times the honeybee's flight force. This work may provide inspiration for the design of robotic flying pollinators.

  12. A DNA barcoding approach to characterize pollen collected by honeybees.

    Directory of Open Access Journals (Sweden)

    Andrea Galimberti

    Full Text Available In the present study, we investigated DNA barcoding effectiveness to characterize honeybee pollen pellets, a food supplement largely used for human nutrition due to its therapeutic properties. We collected pollen pellets using modified beehives placed in three zones within an alpine protected area (Grigna Settentrionale Regional Park, Italy. A DNA barcoding reference database, including rbcL and trnH-psbA sequences from 693 plant species (104 sequenced in this study was assembled. The database was used to identify pollen collected from the hives. Fifty-two plant species were identified at the molecular level. Results suggested rbcL alone could not distinguish among congeneric plants; however, psbA-trnH identified most of the pollen samples at the species level. Substantial variability in pollen composition was observed between the highest elevation locality (Alpe Moconodeno, characterized by arid grasslands and a rocky substrate, and the other two sites (Cornisella and Ortanella at lower altitudes. Pollen from Ortanella and Cornisella showed the presence of typical deciduous forest species; however in samples collected at Ortanella, pollen of the invasive Lonicera japonica, and the ornamental Pelargonium x hortorum were observed. Our results indicated pollen composition was largely influenced by floristic local biodiversity, plant phenology, and the presence of alien flowering species. Therefore, pollen molecular characterization based on DNA barcoding might serve useful to beekeepers in obtaining honeybee products with specific nutritional or therapeutic characteristics desired by food market demands.

  13. Identification sources of pollen spectra in dry and wet atmospheric deposition in the forest-steppe zone of Altai Krai (Russia)

    Science.gov (United States)

    Ryabchinskaya, Natalia; Nenasheva, Galina; Malygina, Natalia

    2015-04-01

    of precipitation and the samples obtained by Burkard pollen traps for dates with precipitation from April to May 2014 showed the following. Pollen spectra isolated from the different types of precipitation (dry and wet) correspond to each other in taxonomic composition in 85% of cases. For example, isolated pollen spectra for 11 April, considering the wet deposition, is characterized by the presence of Pinus sylvestris. According to Burkard pollen traps, pollen grains Pinus sylvestris were also identified in the air. To identify the sources of pollen grains, we estimated the long-term average date of pine dusting on the territory of Barnaul. During the period from 2004 till 2013 it accounts for the end of the second decade of May. Thereby, isolated pollen grains are unlikely to have local origin. To confirm this fact, backward trajectories were calculated on April 11, 2014 using the model HYSPLIT [http://ready.arl.noaa.gov/HYSPLIT.php]. Trajectories showed the southwest transport of pollen to have been identified in the atmospheric surface layer from the territory in the south of Altai Krai, including the surroundings of Lake Zaisan (Kazakhstan), where earlier dusting of pine could be observed mentioned.

  14. Organic analysis of lunar samples and the Martian surface.

    Science.gov (United States)

    Oro, J.; Flory, D.

    1973-01-01

    In addition to the organogenic elements (H, C, N, O, S, P) which are necessary for the synthesis of organic molecules, the lunar samples from Apollo 11, 12, 14, and 15 contain substantial amounts of CO, N2, and CO2 which are released at relatively high temperatures and smaller amounts of more complex organic compounds (e.g., benzene). The lunar surface provides one of the less favorable solar system models for the synthesis of organic compounds; yet small amounts of these compounds have been detected in the returned samples. It is reasonable to assume that the different physical and developmental features of the planet Mars (increased gravitational field, presence of an atmosphere with CO2, CO, and H2O, recent volcanic and tectonic activity, etc.) would favor an increased organic content of the surface of this planet relative to the moon. Therefore the organic molecules present in the Martian soil should be measurable by miniaturized mass spectrometers after fractional distillation or gas chromatographic separation of the volatiles released by moderate heating.

  15. Allergies, asthma, and pollen

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/patientinstructions/000489.htm Allergies, asthma, and pollen To use the sharing features ... this page, please enable JavaScript. Things that make allergies or asthma worse are called triggers. It is ...

  16. Borassodendron (Palmae) in the Southeast Asian fossil pollen record

    NARCIS (Netherlands)

    Maloney, B.K.

    2000-01-01

    Borassodendron machadonis pollen occurred throughout the Holocene pollen record of Nong Thale Song Hong, Thailand, until about 4000 BP. It was also present in one sample from Khok Phanom Di, Thailand, and in the Mahakam Delta, Kalimantan, records, but B. machadonis has not been reported from the

  17. Profiling and functional classification of esterases in olive (Olea europaea) pollen during germination.

    Science.gov (United States)

    Rejón, Juan D; Zienkiewicz, Agnieszka; Rodríguez-García, María Isabel; Castro, Antonio J

    2012-10-01

    A pollen grain contains a number of esterases, many of which are released upon contact with the stigma surface. However, the identity and function of most of these esterases remain unknown. In this work, esterases from olive pollen during its germination were identifided and functionally characterized. The esterolytic capacity of olive (Olea europaea) pollen was examined using in vitro and in-gel enzymatic assays with different enzyme substrates. The functional analysis of pollen esterases was achieved by inhibition assays by using specific inhibitors. The cellular localization of esterase activities was performed using histochemical methods. Olive pollen showed high levels of non-specific esterase activity, which remained steady after hydration and germination. Up to 20 esterolytic bands were identified on polyacrylamide gels. All the inhibitors decreased pollen germinability, but only diisopropyl fluorophosphate (DIFP) hampered pollen tube growth. Non-specific esterase activity is localized on the surface of oil bodies (OBs) and small vesicles, in the pollen intine and in the callose layer of the pollen tube wall. Acetylcholinesterase (AChE) activity was mostly observed in the apertures, exine and pollen coat, and attached to the pollen tube wall surface and to small cytoplasmic vesicles. In this work, for the first time a systematic functional characterization of esterase enzymes in pollen from a plant species with wet stigma has been carried out. Olive pollen esterases belong to four different functional groups: carboxylesterases, acetylesterases, AChEs and lipases. The cellular localization of esterase activity indicates that the intine is a putative storage site for esterolytic enzymes in olive pollen. Based on inhibition assays and cellular localization of enzymatic activities, it can be concluded that these enzymes are likely to be involved in pollen germination, and pollen tube growth and penetration of the stigma.

  18. Fraxinus pollen as a source of environmental pollution

    Directory of Open Access Journals (Sweden)

    María Fernández-González

    2016-06-01

    Full Text Available In Southern Europe there are but a few studies focused on the allergenic impact of ash (Fraxinus pollen as a result of its scarce distribution. In the city of Ourense this type of pollen represents 2% of the total atmospheric pollen recorded. The goal of this study is to determine the atmospheric concentrations of Fraxinus pollen and its allergen in Ourense’s atmosphere in 2015, and to assess their relationship with the main meteorological variables. The aim is to assess whether the pollen counts match the actual exposure conditions for allergen-sensitive patients. A Lanzoni VPPS-2000 volumetric sampler was used for pollen sampling, whereas a Burkard Cyclone sampler was used for allergen detection.The flowering period of Fraxinus was long, having a duration of 76 days between the third week of January and the rst week of April as consequence of the asynchronous flowering of the different species growing in the study area. The presence of the ash allergen in the atmosphere can be detected using the main olive tree allergen, Ole e 1. Our study indicates that the combination of pollen counts and allergen quanti cation should be contemplated to estimate the real exposure of sensitive people. In the case of Fraxinus pollen, there may be allergy risk periods before and after the occurrence of the highest pollen concentrations in the atmosphere as a result of special rain and humidity conditions during its flowering period.

  19. Modern pollen data from the Canadian Arctic, 1972-1973

    Science.gov (United States)

    Nichols, Harvey; Stolze, Susann

    2017-05-01

    This data descriptor reports results of a 1972-73 baseline study of modern pollen deposition in the Canadian Arctic to originally aid interpretation of Holocene pollen diagrams from that region, especially focussed on the arctic tree-line. The data set is geographically unique due to its extent, and allows the assessment of the effects of modern climate change on northern ecosystems, including fluctuations of the a arctic tree-line. Repeated sampling was conducted along an interior transect at 29 sites from the Boreal Forest to the High Arctic, with five additional coastal sites covering a total distance of 3,200 km. Static pollen samplers captured both local pollen and long-distance pollen wind-blown from the Boreal Forest. Moss and lichen polsters provided multi-year pollen fallout to assess the effectiveness of the static pollen samplers. The local vegetation was recorded at each site. This descriptor provides information on data archived at the World Data Center PANGAEA, which includes spreadsheets detailing site and sample information as well as raw and processed pollen data obtained on over 500 samples.

  20. Quantifying pollen-vegetation relationships to reconstruct ancient forests using 19th-century forest composition and pollen data

    Science.gov (United States)

    Dawson, Andria; Paciorek, Christopher J.; McLachlan, Jason S.; Goring, Simon; Williams, John W.; Jackson, Stephen T.

    2016-01-01

    Mitigation of climate change and adaptation to its effects relies partly on how effectively land-atmosphere interactions can be quantified. Quantifying composition of past forest ecosystems can help understand processes governing forest dynamics in a changing world. Fossil pollen data provide information about past forest composition, but rigorous interpretation requires development of pollen-vegetation models (PVMs) that account for interspecific differences in pollen production and dispersal. Widespread and intensified land-use over the 19th and 20th centuries may have altered pollen-vegetation relationships. Here we use STEPPS, a Bayesian hierarchical spatial PVM, to estimate key process parameters and associated uncertainties in the pollen-vegetation relationship. We apply alternate dispersal kernels, and calibrate STEPPS using a newly developed Euro-American settlement-era calibration data set constructed from Public Land Survey data and fossil pollen samples matched to the settlement-era using expert elicitation. Models based on the inverse power-law dispersal kernel outperformed those based on the Gaussian dispersal kernel, indicating that pollen dispersal kernels are fat tailed. Pine and birch have the highest pollen productivities. Pollen productivity and dispersal estimates are generally consistent with previous understanding from modern data sets, although source area estimates are larger. Tests of model predictions demonstrate the ability of STEPPS to predict regional compositional patterns.

  1. Characteristics of modern pollen rain and the relationship to vegetation in sagebrush-steppe environments of Montana, USA

    Science.gov (United States)

    Briles, C.; Bryant, V.

    2010-12-01

    Variations in pollen production and dispersal characteristics among plant species complicate our ability to determine direct relationships between deposited pollen and actual vegetation. In order to better understand modern pollen-vegetation relationships, we analyzed pollen from 61 samples taken from sagebrush-steppe environments across Montana and compared them with the actual vegetation composition at each site. We also determined to what degree sagebrush-steppe communities can be geographically distinguished from one another based on their pollen signature. Pollen preservation was good, especially in wetter environments, with pollen degradataion ranging from 4-15%. Diploxylon Pinus was the primary contributor to the pollen rain, even in plots where pine trees did not occur or were several kilometers from the plot. Artemisia and grass pollen are underrepresented in the soils samples, while Chenopodiaceae and Juniperus pollen are overrepresented when compared to actual vegetation composition. Insect-pollinated species are present only in very minor amounts in the soil samples, even though some (e.g., Brassica) are abundant in the plots. In general, pollen spectra show significant differences between regions, however, within each region the individual spectra are not statistically significant from one another. An understanding of modern pollen-vegetation relationships and the palynological “fingerprint” of sagebrush-steppe communities aid in climatic and ecological interpretations of fossil pollen assemblages. The data also provide important control samples for forensics studies that use pollen to geolocate an object or person to a crime scene.

  2. Effect of meteorological parameters on Poaceae pollen in the atmosphere of Tetouan (NW Morocco)

    Science.gov (United States)

    Aboulaich, Nadia; Achmakh, Lamiaa; Bouziane, Hassan; Trigo, M. Mar; Recio, Marta; Kadiri, Mohamed; Cabezudo, Baltasar; Riadi, Hassane; Kazzaz, Mohamed

    2013-03-01

    Poaceae pollen is one of the most prevalent aeroallergens causing allergenic reactions. The aim of this study was to characterise the grass pollen season in Tetouan during the years 2008-2010, to analyse the effect of some meteorological parameters on the incidence of the airborne Poaceae pollen, and to establish forecasting variables for daily pollen concentrations. Aerobiological sampling was undertaken over three seasons using the volumetric method. The pollen season started in April and showed the highest pollen index in May and June, when the maximum temperature ranged from 23 to 27 °C, respectively. The annual pollen score recorded varied from year to year between 2,588 and 5,404. The main pollen season lasted 114-173 days, with peak days occurring mainly in May; the highest concentration reached 308 pollen grains/m3. Air temperature was the most important meteorological parameter and correlated positively to daily pollen concentration increase. An increase in relative humidity and precipitation was usually related to a decrease in airborne pollen content. External validation of the models performed using data from 2011 showed that Poaceae pollen concentration can be highly predicted (64.2-78.6 %) from the maximum temperature, its mean concentration for the same day in other years, and its concentration recorded on the previous day. Sensitive patients suffering allergy to Poaceae pollen are at moderate to highest risk of manifesting allergic symptoms to grass pollen over 33-42 days. The results obtained provide new information on the quantitative contribution of the Poaceae pollen to the airborne pollen of Tetouan and on its temporal distribution. Airborne pollen can be surveyed and forecast in order to warn the atopic population.

  3. [Study on the identification of six kinds of bee pollens by three-step infrared macro-fingerprint method].

    Science.gov (United States)

    Wu, Jie; Zhou, Quno; Wu, Li-Ming; Au, Jian-Dong; Sun, Su-Qin; Hu, Fu-Liang

    2010-02-01

    Six kinds of bee pollens, including apricot pollen, lotus pollen, rape pollen, camellia pollen, watermelon pollen and corn poppy pollen, were identified non-destructively by Fourier transform infrared spectroscopy (FTIR) combined with derivative spectra and two-dimensional correlation spectroscopy (2D) in the present article. Compared with conventional IR spectra of samples, some certain differences were found in the characteristic peaks of proteins, lipids and carbohydrates. Obvious differences of the six kinds of bee pollens were found in the second derivative spectra. And in the 2D-IR correlation spectra, the samples presented the differences in the position and intensity of the autopeaks and correlation peak clusters. Therefore, the three-step IR macro-fingerprint provides a more rapid and effective method for the identification of different kinds of bee pollens.

  4. Testing multivariate analysis in paleoenvironmental reconstructions using pollen records from Lagoa Salgada, NE Rio de Janeiro State, Brazil.

    Science.gov (United States)

    Toledo, Mauro B de; Barth, Ortrud M; Silva, Cleverson G; Barros, Marcia A

    2009-12-01

    Despite the indisputable significance of identification of modern analogs for Paleoecology research, relatively few studies attempted to integrate modern and fossil samples on paleoenvironmental reconstructions. In Palynology, this general pattern is not different from other fields of Paleoecology. This study demonstrates the practical application of modern pollen deposition data on paleoenvironmental reconstructions based on fossil pollen by using multivariate analysis. The main goal of this study was to use Detrended Correspondence Analysis (DCA) to compare pollen samples from two sediment cores collected at Lagoa Salgada, a coastal lagoon located at northeastern Rio de Janeiro State. Furthermore, modern surface samples were also statistically compared with samples from both cores, providing new paleoecological insights. DCA demonstrated that samples from both cores are more similar than previously expected, and that a strong pattern, related to a paleoenvironmental event, is present within the fossil data, clearly identifying in the scatter plot samples that represent pre- and post-environmental change. Additionally, it became apparent that modern vegetation and environmental conditions were established in this region 2500 years before present (BP). Multivariate Analysis allowed a more reliable integration of modern and fossil pollen data, proving to be a powerful tool in Paleoecology studies that should be employed more often on paleoclimate and paleoenvironmental reconstructions.

  5. RELATIONSHIP BETWEEN RECENT POLLEN DEPOSITION AND AIRBORNE POLLEN CONCENTRATION

    NARCIS (Netherlands)

    SPIEKSMA, FTM; NIKKELS, BH; BOTTEMA, S

    In the reconstruction of past or recent vegetation the study of deposited pollen plays an important role. As reference value, very often the pollen content of moss polsters (''moss cushions'') is assessed to estimate the pollen deposition (''influx'') from the air. Recently, the data from

  6. Airborne pollen spectrum and hay fever type prevalence in Vinnitsa, central Ukraine

    Directory of Open Access Journals (Sweden)

    Victoria Valeriivna Rodinkova

    2015-12-01

    Full Text Available The article deals with the main pollen spectrum in relation to patients’ sensitivity determined in the ambient air of Vinnitsa city located in central Ukraine. The study performed by gravimetric sampling in the years 1999–2000 and by volumetric sampling in the years 2009–2014 showed that Urtica, Betula, Pinus, Alnus, Fraxinus, Ambrosia, Artemisia, Juglans, Carpinus, Populus, Quercus, Acer, Salix, Poaceae, Amarathaceae, and Polygonaceae pollen grains are prevalent among the airborne allergen types in the urban atmosphere. The principal pollen types remain the same but over time their quantities have changed. The relative abundance of Carpinus and Amaranthaceae airborne pollen decreased while the fraction of Urtica pollen increased in the last decade. From 50 to 69 pollen types were determined in the ambient air depending on the season. From 24 to 27 pollen types represented woody plants and from 22 to 46 pollen types belonged to the herbaceous plants. A considerable decrease in herbal pollen types is noted in the Vinnitsa air at present. It was shown that children were sensitive to weed pollen grains, including ragweed, mugwort, and grass, while adults were more sensitive to tree and grass pollen grains. Further studies of the pollen spectrum in the ambient air of this city are required in order to control the hay fever symptoms.

  7. Pollen studies of textile from an Iron Age grave at Hammerum, Denmark

    DEFF Research Database (Denmark)

    Enevold, Renée

    2013-01-01

    This article presents the methods employed and the results obtained in pollen studies of a prehistoric grave, identifying a fascinating and productive context for pollen analyses: prehistoric textiles. The methods involved direct sampling from the grave during excavation and various measures aimed...... excavated, providing a unique opportunity to collect samples for pollen analysis from both the textile material and from the underlying grave sediment. This allowed comparison of pollen assemblages from different components within the grave and an assessment of the method itself. The effort involved...... was rewarded with a set of results which permitted detailed interpretation. Large amounts of pollen of crops and associated anthropogenic plants in the textile sample suggest that agricultural work was the primary source of the pollen embedded in the clothing. In contrast, the pollen assemblages from...

  8. Pseudospectral Gaussian quantum dynamics: Efficient sampling of potential energy surfaces.

    Science.gov (United States)

    Heaps, Charles W; Mazziotti, David A

    2016-04-28

    Trajectory-based Gaussian basis sets have been tremendously successful in describing high-dimensional quantum molecular dynamics. In this paper, we introduce a pseudospectral Gaussian-based method that achieves accurate quantum dynamics using efficient, real-space sampling of the time-dependent basis set. As in other Gaussian basis methods, we begin with a basis set expansion using time-dependent Gaussian basis functions guided by classical mechanics. Unlike other Gaussian methods but characteristic of the pseudospectral and collocation methods, the basis set is tested with N Dirac delta functions, where N is the number of basis functions, rather than using the basis function as test functions. As a result, the integration for matrix elements is reduced to function evaluation. Pseudospectral Gaussian dynamics only requires O(N) potential energy calculations, in contrast to O(N(2)) evaluations in a variational calculation. The classical trajectories allow small basis sets to sample high-dimensional potentials. Applications are made to diatomic oscillations in a Morse potential and a generalized version of the Henon-Heiles potential in two, four, and six dimensions. Comparisons are drawn to full analytical evaluation of potential energy integrals (variational) and the bra-ket averaged Taylor (BAT) expansion, an O(N) approximation used in Gaussian-based dynamics. In all cases, the pseudospectral Gaussian method is competitive with full variational calculations that require a global, analytical, and integrable potential energy surface. Additionally, the BAT breaks down when quantum mechanical coherence is particularly strong (i.e., barrier reflection in the Morse oscillator). The ability to obtain variational accuracy using only the potential energy at discrete points makes the pseudospectral Gaussian method a promising avenue for on-the-fly dynamics, where electronic structure calculations become computationally significant.

  9. Use of MODIS Satellite Data to Evaluate Juniperus spp. Pollen Phenology to Support a Pollen Dispersal Model, PREAM, to Support Public Health Allergy Alerts

    Science.gov (United States)

    Luvall, J. C.; Sprigg, W. A.; Levetin, E.; Huete, A.; Nickovic, S.; Prasad, A.; Pejanovic, G. A.; Vukovic, A.; VandeWater, P. K.; Budge, A. M.; hide

    2013-01-01

    Pollen can be transported great distances. Van de Water et. al., 2003 reported Juniperus spp. pollen was transported 200-600 km. Hence local observations of plant phenology may not be consistent with the timing and source of pollen collected by pollen sampling instruments. The DREAM (Dust REgional Atmospheric Model) is a verified model for atmospheric dust transport modeling using MODIS data products to identify source regions and concentrations of dust. We are modifying the DREAM model to incorporate pollen transport. Pollen emission is based on MODIS-derived phenology of Juniperus spp. communities. Ground-based observational records of pollen release timing and quantities will be used as model verification. This information will be used to support the Centers for Disease Control and Prevention s National Environmental Public Health Tracking Program and the State of New Mexico environmental public health decision support for asthma and allergies alerts

  10. Use of MODIS Satellite Data to Evaluate Juniperus spp. Pollen Phenology to Support a Pollen Dispersal Model, PREAM, to Support Public Health Allergy Alerts

    Science.gov (United States)

    Luvall, J. C.; Sprigg, W. A.; Levetin, E.; Huete, A. R.; Nickovic, S.; Prasad, A. K.; Pejanovic, G.; Vukovic, A.; Van De Water, P. K.; Budge, A.; Hudspeth, W. B.; Krapfl, H.; Toth, B.; Zelicoff, A.; Myers, O.; Bunderson, L.; Ponce-Campos, G.; Menache, M.; Crimmins, T. M.; Vujadinovic, M.

    2012-12-01

    Pollen can be transported great distances. Van de Water et. al., 2003 reported Juniperus spp. pollen was transported 200-600 km. Hence local observations of plant phenology may not be consistent with the timing and source of pollen collected by pollen sampling instruments. The DREAM (Dust REgional Atmospheric Model, Nickovic et al. 2001) is a verified model for atmospheric dust transport modeling using MODIS data products to identify source regions and concentrations of dust. We are modifying the DREAM model to incorporate pollen transport. Pollen emission is based on MODIS-derived phenology of Juniperus spp. communities. Ground-based observational records of pollen release timing and quantities will be used as model verification. This information will be used to support the Centers for Disease Control and Prevention's National Environmental Public Health Tracking Program and the State of New Mexico environmental public health decision support for asthma and allergies alerts.

  11. Hybridizing pines with diluted pollen

    Science.gov (United States)

    Robert Z. Callaham

    1967-01-01

    Diluted pollens would have many uses by the tree breeder. Dilutions would be particularly advantageous in making many controlled pollinations with a limited amount of pollen. They also would be useful in artificial mass pollinations of orchards or single trees. Diluted pollens might help overcome troublesome genetic barriers to crossing. Feasibility o,f using diluted...

  12. Germination and storage of pollen

    NARCIS (Netherlands)

    Visser, T.

    1955-01-01

    Germination of pear pollen markedly improved when boric acid was added to the medium. The pollen was more sensitive to boron in water than in 10 % sugar solution. Supplying weak solutions of boron to pear branches before flowering resulted in a good germination of the pollen in sugar solution

  13. Identification of sweet chesnut pollen in bee pollen pellet using using molecular analysis.

    Directory of Open Access Journals (Sweden)

    Jana Žiarovská

    2015-10-01

    Full Text Available Castanea sativa posses many characteristics that are used by human for different purposes, not only as a part of the food. One of them is the utilization of the sweet chesnut pollen for its pharmacological benefits. Actually, no information about the DNA based identification of the sweet chesnut exist. Here, an identification of Castanea sativa based on the specific DNA fragment amplification is described for the first time. Sweet chesnut identification was performed in the very complex sample of bee pollen pellets that were identified as to contain sweet chesnut pollen grains by morphological analysis. First, bioinformatic analysis was performed to find a Castanea sativa conservative part of galactol synthase gene. BLAST alignment of the CDS of GolS1 gene was performed by BLASTtn against plants nucleotide sequences in the NCBI database to ensure for the specifity or existing nucleotide differences. Then, specific primers were subsequently designed and PCR amplification was performed. All the PCRs have run in duplicates for pollen pellet sample and two independent samples of Castanea sativa pure pollen. Restriction cleavage of the PCR amplified fragment was performed to confirm the specifity of the obtained PCR product with the positive confirmation as the predicted three restriction fragments were obtained that fully correspond by the length to those from virtual clevage. Restriction endonuclease Hpy166II was used in restriction cleavage analysis. Castanea sativa pollen grains were confirmed reliable in multifloral pollen pellet by PCR and this approach has the potential to be used effectively for the authentication purposes of sweet chesnut.

  14. Effect of land uses and wind direction on the contribution of local sources to airborne pollen

    Energy Technology Data Exchange (ETDEWEB)

    Rojo, Jesús; Rapp, Ana; Lara, Beatriz; Fernández-González, Federico; Pérez-Badia, Rosa

    2015-12-15

    The interpretation of airborne pollen levels in cities based on the contribution of the surrounding flora and vegetation is a useful tool to estimate airborne allergen concentrations and, consequently, to determine the allergy risk for local residents. This study examined the pollen spectrum in a city in central Spain (Guadalajara) and analysed the vegetation landscape and land uses within a radius of 20 km in an attempt to identify and locate the origin of airborne pollen and to determine the effect of meteorological variables on pollen emission and dispersal. The results showed that local wind direction was largely responsible for changes in the concentrations of different airborne pollen types. The land uses contributing most to airborne pollen counts were urban green spaces, though only 0.1% of the total surface area studied, and broadleaved forest which covered 5% of the study area. These two types of land use together accounted for 70% of the airborne pollen. Crops, scrubland and pastureland, though covering 80% of the total surface area, contributed only 18.6% to the total pollen count, and this contribution mainly consisted of pollen from Olea and herbaceous plants, including Poaceae, Urticaceae and Chenopodiaceae–Amaranthaceae. Pollen from ornamental species were mainly associated with easterly (Platanus), southerly (Cupressaceae) and westerly (Cupressaceae and Platanus) winds from the areas where the city's largest parks and gardens are located. Quercus pollen was mostly transported by winds blowing in from holm-oak stands on the eastern edge of the city. The highest Populus pollen counts were associated with easterly and westerly winds blowing in from areas containing rivers and streams. The airborne pollen counts generally rose with increasing temperature, solar radiation and hours of sunlight, all of which favour pollen release. In contrast, pollen counts declined with increased relative humidity and rainfall, which hinder airborne pollen

  15. Effect of land uses and wind direction on the contribution of local sources to airborne pollen

    International Nuclear Information System (INIS)

    Rojo, Jesús; Rapp, Ana; Lara, Beatriz; Fernández-González, Federico; Pérez-Badia, Rosa

    2015-01-01

    The interpretation of airborne pollen levels in cities based on the contribution of the surrounding flora and vegetation is a useful tool to estimate airborne allergen concentrations and, consequently, to determine the allergy risk for local residents. This study examined the pollen spectrum in a city in central Spain (Guadalajara) and analysed the vegetation landscape and land uses within a radius of 20 km in an attempt to identify and locate the origin of airborne pollen and to determine the effect of meteorological variables on pollen emission and dispersal. The results showed that local wind direction was largely responsible for changes in the concentrations of different airborne pollen types. The land uses contributing most to airborne pollen counts were urban green spaces, though only 0.1% of the total surface area studied, and broadleaved forest which covered 5% of the study area. These two types of land use together accounted for 70% of the airborne pollen. Crops, scrubland and pastureland, though covering 80% of the total surface area, contributed only 18.6% to the total pollen count, and this contribution mainly consisted of pollen from Olea and herbaceous plants, including Poaceae, Urticaceae and Chenopodiaceae–Amaranthaceae. Pollen from ornamental species were mainly associated with easterly (Platanus), southerly (Cupressaceae) and westerly (Cupressaceae and Platanus) winds from the areas where the city's largest parks and gardens are located. Quercus pollen was mostly transported by winds blowing in from holm-oak stands on the eastern edge of the city. The highest Populus pollen counts were associated with easterly and westerly winds blowing in from areas containing rivers and streams. The airborne pollen counts generally rose with increasing temperature, solar radiation and hours of sunlight, all of which favour pollen release. In contrast, pollen counts declined with increased relative humidity and rainfall, which hinder airborne pollen

  16. Rapid climatic variability in the west Mediterranean during the last 25 000 years from high resolution pollen data

    Directory of Open Access Journals (Sweden)

    N. Combourieu Nebout

    2009-09-01

    Full Text Available High-temporal resolution pollen record from the Alboran Sea ODP Site 976, pollen-based quantitative climate reconstruction and biomisation show that changes of Mediterranean vegetation have been clearly modulated by short and long term variability during the last 25 000 years. The reliability of the quantitative climate reconstruction from marine pollen spectra has been tested using 22 marine core-top samples from the Mediterranean. The ODP Site 976 pollen record and climatic reconstruction confirm that Mediterranean environments have a rapid response to the climatic fluctuations during the last Termination. The western Mediterranean vegetation response appears nearly synchronous with North Atlantic variability during the last deglaciation as well as during the Holocene. High-resolution analyses of the ODP Site 976 pollen record show a cooling trend during the Bölling/Allerød period. In addition, this period is marked by two warm episodes bracketing a cooling event that represent the Bölling-Older Dryas-Allerød succession. During the Holocene, recurrent declines of the forest cover over the Alboran Sea borderlands indicate climate events that correlate well with several events of increased Mediterranean dryness observed on the continent and with Mediterranean Sea cooling episodes detected by alkenone-based sea surface temperature reconstructions. These events clearly reflect the response of the Mediterranean vegetation to the North Atlantic Holocene cold events.

  17. Influence of sampling points on inspection accuracy of free-form surfaces using coordinate measuring machine

    Science.gov (United States)

    Xie, Mengmin; Chen, Yueping; Zhang, Anshe; Fang, Rui

    2018-03-01

    The inspection accuracy of free-form surfaces is mainly affected by the processing, the number of sampling points, the distribution of sampling points, the measurement equipment and other factors. This paper focuses on the influence of sampling points on inspection accuracy of free-form surfaces, and isoparametric distribution was used in sample point distribution. Different sampling points number was compared on a same surface and a probe, the measurement data were analyzed and the optimal sampling points number was obtained.

  18. ANTIOXIDANT ACTIVITY AND POLYPHENOL CONTENT OF MALT BEVERAGES ENRICHED WITH BEE POLLEN

    Directory of Open Access Journals (Sweden)

    Miriam Solgajová

    2014-02-01

    Full Text Available In food industry, especially among the brewers, using of natural ingredients is increasingly growing demand. Beer is one of the most popular beverages in the world with evident positive effects on the overall health condition. It can be used as a base for developing a variety of products with specific physiological activity. Bee pollen is considered to be one of the possible sources of active ingredients for that purpose. Activity of phenolic and flavonoid compounds in bee pollen can contribute to the antioxidant potential of beer. The objective of this study was to examine the influence of different types and content of bee pollen on the antioxidant properties of malt beverages and to compare phenolic and flavonoid profiles. The technological process of malt beverages preparation with addition of bee pollen was also verified. It was found out that all beverages enriched with bee pollen had higher polyphenol, flavonoid content and antioxidant potential than control sample – pure wort. The higher antioxidant activities of all extracts was measured in sample R2 - wort with 0.6% of dry rapeseed pollen and sample R4 - wort with 0.6% of frozen rapeseed pollen. The higher phenolic content than in other samples was measured in sample M4 - wort with 0.6% of frozen poppy pollen and sample M1 - wort with 0.256% of dry poppy pollen. Higher total flavonoid content was found out in sample M2 - wort with 0.6% of dry poppy pollen and M4 - wort with 0.6% of frozen poppy pollen. In conclusion, the most noticeable results of antioxidant activity, phenolic and flavonoid content were achieved in samples with higher 0.6% addition of bee pollen, mostly poppy (Papaver somniferum L. pollen.

  19. Image analysis in automatic system of pollen recognition

    Directory of Open Access Journals (Sweden)

    Piotr Rapiejko

    2012-12-01

    Full Text Available In allergology practice and research, it would be convenient to receive pollen identification and monitoring results in much shorter time than it comes from human identification. Image based analysis is one of the approaches to an automated identification scheme for pollen grain and pattern recognition on such images is widely used as a powerful tool. The goal of such attempt is to provide accurate, fast recognition and classification and counting of pollen grains by computer system for monitoring. The isolated pollen grain are objects extracted from microscopic image by CCD camera and PC computer under proper conditions for further analysis. The algorithms are based on the knowledge from feature vector analysis of estimated parameters calculated from grain characteristics, including morphological features, surface features and other applicable estimated characteristics. Segmentation algorithms specially tailored to pollen object characteristics provide exact descriptions of pollen characteristics (border and internal features already used by human expert. The specific characteristics and its measures are statistically estimated for each object. Some low level statistics for estimated local and global measures of the features establish the feature space. Some special care should be paid on choosing these feature and on constructing the feature space to optimize the number of subspaces for higher recognition rates in low-level classification for type differentiation of pollen grains.The results of estimated parameters of feature vector in low dimension space for some typical pollen types are presented, as well as some effective and fast recognition results of performed experiments for different pollens. The findings show the ewidence of using proper chosen estimators of central and invariant moments (M21, NM2, NM3, NM8 NM9, of tailored characteristics for good enough classification measures (efficiency > 95%, even for low dimensional classifiers

  20. chemical and microbiological assessment of surface water samples ...

    African Journals Online (AJOL)

    PROF EKWUEME

    are to assess, ascertain and evaluate the level, degree and type of pollution that characterize the surface water resources of Enugu area of ... implications for economic development since people relies heavily on it for various uses such as ... surface water bodies are prone to impacts from anthropogenic activities apart from ...

  1. Bee pollen: a dangerous food for allergic children. Identification of responsible allergens.

    Science.gov (United States)

    Martín-Muñoz, M F; Bartolome, B; Caminoa, M; Bobolea, I; Ara, M C Garcia; Quirce, S

    2010-01-01

    Bee pollen has been proposed as a food supplement, but it can be a dangerous food for people with allergy. We study an allergic reaction after ingestion of bee pollen in a 4-year-old boy who had developed rhinitis in the last spring and autumn. We performed a prick-by-prick test with bee pollen and skin prick tests with the most important local pollens, house dust mites, common fungi, and animal danders. The levels of serum tryptase, serum total IgE and specific IgE against bee venom and local pollen extracts were determined. The composition of the bee pollen was analysed and SDS-PAGE immunoblotting and blotting-inhibition were carried out. Prick tests were positive to bee pollen and all local pollens extracts and negative to any other allergen sources. The bee pollen sample contained pollens from Quercus genus, and Asteraceae (Compositae) and Rosaceae families. Total IgE was 435 kU/l. Serum specific IgE to bee pollen was 6 kU/l and greater than 0.35 kU/L against pollens from Artemisia vulgaris, Taraxacum officinalis, Cupressus arizonica, Olea europaea, Platanus acerifolia and Lolium perenne as well as to n Art v 1 and other pollen marker allergens. Tryptase level was 3.5 mcg/mL. SDS-PAGE immunoblotting-inhibition points to Asteraceae pollen as the possible cause of the allergic reaction. Foods derived from bees can be dangerous to people with allergy to pollen. Copyright © 2009 SEICAP. Published by Elsevier Espana. All rights reserved.

  2. Variation patterns of pollen production in palm flowers

    DEFF Research Database (Denmark)

    Alapetite, Elodie; Barfod, Anders; Albert, Beatrice

    2016-01-01

    pollen production and stamen number has never been so far investigated. The diversity in stamen number observed among palms species and genera provides an ideal case study to test for such a correlation, taking into account phylogenetic constraints. Based on a survey of flowers from 82 species...... representative of the various palm tribes and compared it to stamen number, we show that pollen production in palms ranges from hundreds to millions grains. There is a relationship between stamen number and pollen production in our sampling, particularly in Coryphoideae and Arecoideae where there is a tendency...

  3. You Can Run, But You Can't Hide Juniper Pollen Phenology and Dispersal

    Science.gov (United States)

    Luvall, Jeffrey C.

    2013-01-01

    Pollen can be transported great distances. Van de Water et. al., 2003 reported Juniperus spp. pollen was transported 200-600 km. Hence local observations of plant phenology may not be consistent with the timing and source of pollen collected by pollen sampling instruments. The DREAM (Dust REgional Atmospheric Model, Nickovic et al. 2001) is a verified model for atmospheric dust transport modeling using MODIS data products to identify source regions and quantities of dust. We are modified the DREAM model to incorporate pollen transport. Pollen release is estimated based on MODIS derived phenology of Juniperus spp. communities. Ground based observational records of pollen release timing and quantities are used as verification. This information will be used to support the Centers for Disease Control and Prevention's National Environmental Public Health Tracking Program and the State of New Mexico environmental public health decision support for asthma and allergies alerts.

  4. Phytochemical composition and antioxidant activity of Tuscan bee pollen of different botanic origins

    Directory of Open Access Journals (Sweden)

    V. Domenici

    2015-06-01

    Full Text Available Within the apicultural products, the honey bee-pollen is growing in commercial interest due to its high nutritional properties. For the first time, bee-pollen samples from Tuscany (Italy were studied to evaluate botanical origin, phytochemical composition and antioxidant activity. The investigated pollen loads were composed of three botanical families: Castanea, Rubus and Cistus.The highest levels of proteins and lipids were detected in Rubus pollen. Castanea pollen contained greater polyphenols, flavonoids and anthocyanins content, while the highest flavonols level wasdetected in Cistus pollen. These results were also confirmed by front-face fluorescence spectroscopy, used here, for the first time, as a fast tool to characterize bee-pollens.

  5. A Comet Surface Sample Return System, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed Phase II investigation will focus on the development of spacecraft systems required to obtain a sample from the nucleus of a comet, hermetically seal...

  6. A prognostic pollen emissions model for climate models (PECM1.0

    Directory of Open Access Journals (Sweden)

    M. C. Wozniak

    2017-11-01

    Full Text Available We develop a prognostic model called Pollen Emissions for Climate Models (PECM for use within regional and global climate models to simulate pollen counts over the seasonal cycle based on geography, vegetation type, and meteorological parameters. Using modern surface pollen count data, empirical relationships between prior-year annual average temperature and pollen season start dates and end dates are developed for deciduous broadleaf trees (Acer, Alnus, Betula, Fraxinus, Morus, Platanus, Populus, Quercus, Ulmus, evergreen needleleaf trees (Cupressaceae, Pinaceae, grasses (Poaceae; C3, C4, and ragweed (Ambrosia. This regression model explains as much as 57 % of the variance in pollen phenological dates, and it is used to create a climate-flexible phenology that can be used to study the response of wind-driven pollen emissions to climate change. The emissions model is evaluated in the Regional Climate Model version 4 (RegCM4 over the continental United States by prescribing an emission potential from PECM and transporting pollen as aerosol tracers. We evaluate two different pollen emissions scenarios in the model using (1 a taxa-specific land cover database, phenology, and emission potential, and (2 a plant functional type (PFT land cover, phenology, and emission potential. The simulated surface pollen concentrations for both simulations are evaluated against observed surface pollen counts in five climatic subregions. Given prescribed pollen emissions, the RegCM4 simulates observed concentrations within an order of magnitude, although the performance of the simulations in any subregion is strongly related to the land cover representation and the number of observation sites used to create the empirical phenological relationship. The taxa-based model provides a better representation of the phenology of tree-based pollen counts than the PFT-based model; however, we note that the PFT-based version provides a useful and climate-flexible emissions

  7. A prognostic pollen emissions model for climate models (PECM1.0)

    Science.gov (United States)

    Wozniak, Matthew C.; Steiner, Allison L.

    2017-11-01

    We develop a prognostic model called Pollen Emissions for Climate Models (PECM) for use within regional and global climate models to simulate pollen counts over the seasonal cycle based on geography, vegetation type, and meteorological parameters. Using modern surface pollen count data, empirical relationships between prior-year annual average temperature and pollen season start dates and end dates are developed for deciduous broadleaf trees (Acer, Alnus, Betula, Fraxinus, Morus, Platanus, Populus, Quercus, Ulmus), evergreen needleleaf trees (Cupressaceae, Pinaceae), grasses (Poaceae; C3, C4), and ragweed (Ambrosia). This regression model explains as much as 57 % of the variance in pollen phenological dates, and it is used to create a climate-flexible phenology that can be used to study the response of wind-driven pollen emissions to climate change. The emissions model is evaluated in the Regional Climate Model version 4 (RegCM4) over the continental United States by prescribing an emission potential from PECM and transporting pollen as aerosol tracers. We evaluate two different pollen emissions scenarios in the model using (1) a taxa-specific land cover database, phenology, and emission potential, and (2) a plant functional type (PFT) land cover, phenology, and emission potential. The simulated surface pollen concentrations for both simulations are evaluated against observed surface pollen counts in five climatic subregions. Given prescribed pollen emissions, the RegCM4 simulates observed concentrations within an order of magnitude, although the performance of the simulations in any subregion is strongly related to the land cover representation and the number of observation sites used to create the empirical phenological relationship. The taxa-based model provides a better representation of the phenology of tree-based pollen counts than the PFT-based model; however, we note that the PFT-based version provides a useful and climate-flexible emissions model for the

  8. Grass Pollen Allergens

    Science.gov (United States)

    Augustin, Rosa

    1959-01-01

    Heat and pH stability studies and experiments with organic solvents show that the A-antigens discussed in the preceding paper (Augustin, 1959c) are much more labile than the I- (`inner ring') antigens. Breakdown products and/or aggregates are produced which no longer precipitate with antisera to the original extracts, but act as inhibitors. Solutions of pollen allergens, on the other hand, are found to withstand even autoclaving for 15 min. at 20 atm. and vigorous boiling over the naked flame of a bunsen burner. None of the carbohydrates tested has a demonstrable effect on skin reactivity which is, however, destroyed by crystalline pepsin, crystalline trypsin, a crystalline mould protease and a tissue protease (a partially purified extract from rabbit spleen). It follows that the bulk of the allergens—if not all—are proteins. The relation of skin reactivity, immuno-electrophoretic patterns, carbohydrate and protein reactions to the selective destruction of the pollen antigens is investigated. Pollen components prove to have a somewhat wider range of electrophoretic mobilities than serum proteins and are probably as complicated a mixture. The most and least highly negatively charged components are without skin reactivity in allergic subjects. The skin reactive allergens appear to have the mobilities of α- and β-globulins. Not all the hay fever subjects react equally to all the components, and Cocksfoot and Timothy activity patterns vary in different subjects. ImagesFIG. 5 PMID:13795119

  9. Pollen-rain-vegetation relationships along a forest-savanna transect in southeastern Cameroon.

    Science.gov (United States)

    Vincens; Dubois; Guillet; Achoundong; Buchet; Kamgang Kabeyene Beyala V; de Namur C; Riera

    2000-07-01

    Modern soil and litter samples from southeastern Cameroon, collected along a continuous forest-savanna transect were analysed for pollen content to define modern pollen-vegetation relationships. The pollen results, completed and compared with botanical inventories, leaf area index and basal area measurements performed in the same area, clearly registered the physiognomy, the main floristic composition and floral richness of the two sampled ecosystems. Distortions were observed between sampled vegetations and their pollen rain, related to important differences in pollen production and dispersal of plant species: this is a general feature in many tropical regions. The pollen data in the area studied reflected well the recent transgression of forest versus savanna. This permitted us to define inside the forest ecosystem more successional vegetation communities than the botanical surveys allowed.

  10. Computer simulation of RBS spectra from samples with surface roughness

    Czech Academy of Sciences Publication Activity Database

    Malinský, Petr; Hnatowicz, Vladimír; Macková, Anna

    2016-01-01

    Roč. 371, MAR (2016), s. 101-105 ISSN 0168-583X. [22nd International conference on Ion Beam Analysis (IBA). Opatija, 14.06.2015-19.06.2015] R&D Projects: GA MŠk(CZ) LM2011019; GA ČR GA15-01602S Institutional support: RVO:61389005 Keywords : computer simulation * Rutherford backscattering * surface roughness Subject RIV: BG - Nuclear, Atomic and Molecular Physics, Colliders Impact factor: 1.109, year: 2016

  11. Investigation of Primary Factors Affecting the Variation of Modeled Oak Pollen Concentrations: A Case Study for Southeast Texas in 2010

    Science.gov (United States)

    Jeon, Wonbae; Choi, Yunsoo; Roy, Anirban; Pan, Shuai; Price, Daniel; Hwang, Mi-Kyoung; Kim, Kyu Rang; Oh, Inbo

    2018-02-01

    Oak pollen concentrations over the Houston-Galveston-Brazoria (HGB) area in southeastern Texas were modeled and evaluated against in-situ data. We modified the Community Multi-scale Air Quality (CMAQ) model to include oak pollen emission, dispersion, and deposition. The Oak Pollen Emission Model (OPEM) calculated gridded oak pollen emissions, which are based on a parameterized equation considering a plant-specific factor ( C e ), surface characteristics, and meteorology. The simulation period was chosen to be February 21 to April 30 in the spring of 2010, when the observed monthly mean oak pollen concentrations were the highest in six years (2009-2014). The results indicated C e and meteorology played an important role in the calculation of oak pollen emissions. While C e was critical in determining the magnitude of oak pollen emissions, meteorology determined their variability. In particular, the contribution of the meteorology to the variation in oak pollen emissions increased with the oak pollen emission rate. The evaluation results using in-situ surface data revealed that the model underestimated pollen concentrations and was unable to accurately reproduce the peak pollen episodes. The model error was likely due to uncertainty in climatology-based C e used for the estimation of oak pollen emissions and inaccuracy in the wind fields from the Weather Research and Forecast (WRF) model.

  12. Investigation of primary factors affecting the variation of modeled oak pollen concentrations: A case study for Southeast Texas in 2010

    Science.gov (United States)

    Jeon, Wonbae; Choi, Yunsoo; Roy, Anirban; Pan, Shuai; Price, Daniel; Hwang, Mi-Kyoung; Kim, Kyu Rang; Oh, Inbo

    2017-12-01

    Oak pollen concentrations over the Houston-Galveston-Brazoria (HGB) area in southeastern Texas were modeled and evaluated against in-situ data. We modified the Community Multi-scale Air Quality (CMAQ) model to include oak pollen emission, dispersion, and deposition. The Oak Pollen Emission Model (OPEM) calculated gridded oak pollen emissions, which are based on a parameterized equation considering a plant-specific factor (C e ), surface characteristics, and meteorology. The simulation period was chosen to be February 21 to April 30 in the spring of 2010, when the observed monthly mean oak pollen concentrations were the highest in six years (2009-2014). The results indicated C e and meteorology played an important role in the calculation of oak pollen emissions. While C e was critical in determining the magnitude of oak pollen emissions, meteorology determined their variability. In particular, the contribution of the meteorology to the variation in oak pollen emissions increased with the oak pollen emission rate. The evaluation results using in-situ surface data revealed that the model underestimated pollen concentrations and was unable to accurately reproduce the peak pollen episodes. The model error was likely due to uncertainty in climatology-based C e used for the estimation of oak pollen emissions and inaccuracy in the wind fields from the Weather Research and Forecast (WRF) model.

  13. Quantitative biome reconstruction using modern and late Quaternary pollen data from the southern part of the Russian Far East

    Science.gov (United States)

    Mokhova, Lyudmila; Tarasov, Pavel; Bazarova, Valentina; Klimin, Mikhail

    2009-12-01

    In this study we present a recent compilation of 286 modern surface pollen spectra from the southern part of the Russian Far East (42-54°N, 131-141°E) and use it to test the biome reconstruction method. Seventy terrestrial pollen taxa were assigned to plant functional types and then classified to eight regional biomes. When applied to 286 surface pollen spectra, the method assigns about 70% (201 sites) of the samples to the cool mixed forest biome, 17% - to the taiga, 2% - to the cool conifer forest, 3% - to the temperate deciduous forest, and 7% - to the steppe. The steppe reconstruction is characteristic of the pollen spectra from the agricultural areas around Lake Khanka. A visual comparison shows good agreement between pollen-derived biomes and actual vegetation distribution in the region. However, pollen and botanical data, compared with the potential vegetation distribution simulated from the modern climate dataset using the BIOME1 model, demonstrate that spatial distribution of cool mixed forest is underrepresented in the model simulation. The model sets the mean temperature of the coldest month of -15 °C as the factor limiting distribution of the temperate deciduous broadleaf taxa, while vegetation and pollen data from the region demonstrate that this limit should be lowered to -26 °C. Application of the method to the Gur 3-99 pollen record (50°00 'N, 137°03 'E) demonstrates that tundra vegetation predominated around the site prior to 14 ka BP (1 ka = 1000 cal. years). However, the local presence of boreal trees and mixed forest-tundra vegetation is suggested by relatively high taiga scores. Soon after 14 ka BP the scores of taiga become slightly higher than tundra scores. During 11.4-10.5 ka BP a cool conifer forest is reconstructed. Establishment of the full interglacial conditions is marked by the onset of cool mixed forest by 10.5 ka BP. Between 10.3 and 2.5 ka BP the scores of temperate deciduous forest are close to those of cool mixed forest and

  14. Fast Characterization of Moving Samples with Nano-Textured Surfaces

    DEFF Research Database (Denmark)

    Madsen, Morten Hannibal; Hansen, Poul-Erik; Zalkovskij, Maksim

    2015-01-01

    Characterization of structures using conventional optical microscopy is restricted by the diffraction limit. Techniques like atomic force and scanning electron microscopy can investigate smaller structures but are very time consuming. We show that using scatterometry, a technique based on optical...... diffraction, integrated into a commercial light microscope we can characterize nano-textured surfaces in a few milliseconds. The adapted microscope has two detectors, a CCD camera used to easily find an area of interest and a spectrometer for the measurements. We demonstrate that the microscope has...

  15. The Impact of the Invasive Alien Plant, Impatiens glandulifera, on Pollen Transfer Networks.

    Directory of Open Access Journals (Sweden)

    Carine Emer

    Full Text Available Biological invasions are a threat to the maintenance of ecological processes, including pollination. Plant-flower visitor networks are traditionally used as a surrogated for pollination at the community level, despite they do not represent the pollination process, which takes place at the stigma of plants where pollen grains are deposited. Here we investigated whether the invasion of the alien plant Impatiens glandulifera (Balsaminaceae affects pollen transfer at the community level. We asked whether more alien pollen is deposited on the stigmas of plants on invaded sites, whether deposition is affected by stigma type (dry, semidry and wet and whether the invasion of I. glandulifera changes the structure of the resulting pollen transfer networks. We sampled stigmas of plants on 10 sites invaded by I. glandulifera (hereafter, balsam and 10 non-invaded control sites. All 20 networks had interactions with balsam pollen, although significantly more balsam pollen was found on plants with dry stigmas in invaded areas. Balsam pollen deposition was restricted to a small subset of plant species, which is surprising because pollinators are known to carry high loads of balsam pollen. Balsam invasion did not affect the loading of native pollen, nor did it affect pollen transfer network properties; networks were modular and poorly nested, both of which are likely to be related to the specificity of pollen transfer interactions. Our results indicate that pollination networks become more specialized when moving from the flower visitation to the level of pollen transfer networks. Therefore, caution is needed when inferring pollination from patterns of insect visitation or insect pollen loads as the relationship between these and pollen deposition is not straightforward.

  16. Pollen characteristics and in vitro pollen germination of Cedrus ...

    African Journals Online (AJOL)

    PRECIOUS

    2009-11-02

    Nov 2, 2009 ... Sources1020: Ankara Üniversitesi Ziraat Fakultesi Yayinlari, Ankara p.155. Siregar IB, Sweet GB (2000).The Impact of extraction and storage conditions on the viability of radiata pine pollen. Silva Genetica, 49: 10-14. Stairs GR, Troendle V (1967). Male bud pollen radiosensitivity in selected conifer Species.

  17. Pollen characteristics and in vitro pollen germination of Cedrus ...

    African Journals Online (AJOL)

    This study aims to determine the germination characteristics, pollen tube developments, effects of germination media and temperature and incubation durations of the pollens obtained from the four clones (11342, 11344, 11345 and 11351) of Cedrus libani A. Rich. (Lebanon Cedrus) obtained from clonal seed orchard (with ...

  18. An analysis of modern pollen rain from the Maya lowlands of northern Belize

    Science.gov (United States)

    Bhattacharya, T.; Beach, T.; Wahl, D.

    2011-01-01

    In the lowland Maya area, pollen records provide important insights into the impact of past human populations and climate change on tropical ecosystems. Despite a long history of regional paleoecological research, few studies have characterized the palynological signatures of lowland ecosystems, a fact which lowers confidence in ecological inferences made from palynological data. We sought to verify whether we could use pollen spectra to reliably distinguish modern ecosystem types in the Maya lowlands of Central America. We collected 23 soil and sediment samples from eight ecosystem types, including upland, riparian, secondary, and swamp (bajo) forests; pine savanna; and three distinct wetland communities. We analyzed pollen spectra with non-metric multidimensional scaling (NMDS), and found significant compositional differences in ecosystem types' pollen spectra. Forested sites had spectra dominated by Moraceae/Urticaceae pollen, while non-forested sites had significant portions of Poaceae, Asteraceae, and Amaranthaceae pollen. Upland, bajo, and riparian forest differed in representation of Cyperaceae, Bactris-type, and Combretaceae/Melastomataceae pollen. High percentages of pine (Pinus), oak (Quercus), and the presence of Byrsonima characterized pine savanna. Despite its limited sample size, this study provides one of the first statistical analyses of modern pollen rain in the Maya lowlands. Our results show that pollen assemblages can accurately reflect differences between ecosystem types, which may help refine interpretations of pollen records from the Maya area. ?? 2010 Elsevier B.V.

  19. Espectro polínico de amostras de mel de Melipona mandacaia Smith, 1863 (Hymenoptera: Apidae - DOI: 10.4025/actascibiolsci.v28i1.1061 Pollen spectrum from honey samples of Melipona mandacaia Smith, 1863 stingless bee (Hymenoptera: Apidae - DOI: 10.4025/actascibiolsci.v28i1.1061

    Directory of Open Access Journals (Sweden)

    Carlos Afredo Lopes de Carvalho

    2006-03-01

    Full Text Available O espectro polínico de amostras de mel da abelha Melipona mandacaia foi analisado com objetivo de elucidar os recursos alimentares utilizados por essa espécie. A identificação das plantas visitadas foi realizada com base na análise dos tipos polínicos encontrados nas amostras de mel coletadas em 11 colônias localizadas no município de São Gabriel, em área de caatinga do Estado da Bahia, Brasil (11º14’S e 41º52’W. As análises quantitativas e qualitativas foram realizadas com o objetivo de determinar as porcentagens e classes de freqüência dos tipos polínicos presentes nas amostras de mel. Foram encontrados 26 tipos polínicos, sendo o tipo Piptadenia rigida (Mimosaceae considerado dominante. Ricinus communis (Euphorbiaceae, Mimosa verrucata (Mimosaceae e M. arenosa (Mimosaceae foram considerados pólen isolado importante. As famílias mais representativas no espectro polínico das amostras de mel foram Mimosaceae, Euphorbiaceae, Asteraceae e AnacardiaceaeThe pollen spectrum from honey samples of Melipona mandacaia stingless bee was analyzed aiming at elucidating the alimentary resources used by that species. The identification of the visited plants was based on the analysis of pollen from honey samples collected in 11 hives located in São Gabriel county, in the semiarid area of Bahia State, Brazil (11º14’S and 41º52’W. The quantitative and qualitative analyses of honey samples were conducted in order to determine the pollen types percentages and frequency classes. Twenty-six pollen types were found, being the Piptadenia rigida type (Mimosaceae considered dominant. Ricinus communis (Euphorbiaceae, Mimosa verrucata (Mimosaceae and M. arenosa (Mimosaceae were considered important isolated pollen. The most representative families found in the pollen spectrum of the honey samples were Mimosaceae, Euphorbiaceae, Asteraceae and Anacardiaceae

  20. Data Set for the manuscript entitled, "Sample Processing Approach for Detection of Ricin in Surface Samples."

    Data.gov (United States)

    U.S. Environmental Protection Agency — Figure. This dataset is associated with the following publication: Shah, S., S. Kane, A.M. Erler, and T. Alfaro. Sample Processing Approach for Detection of Ricin in...

  1. Honey bee foraging ecology: Season but not landscape diversity shapes the amount and diversity of collected pollen.

    Science.gov (United States)

    Danner, Nadja; Keller, Alexander; Härtel, Stephan; Steffan-Dewenter, Ingolf

    2017-01-01

    The availability of pollen in agricultural landscapes is essential for the successful growth and reproduction of honey bee colonies (Apis mellifera L.). The quantity and diversity of collected pollen can influence the growth and health of honey bee colonies, but little is known about the influence of landscape structure on pollen diet. In a field experiment, we rotated 16 honey bee colonies across 16 agricultural landscapes, used traps to collect samples of collected pollen and observed intra-colonial dance communication to gain information about foraging distances. DNA metabarcoding was applied to analyze mixed pollen samples. Neither the amount of collected pollen nor pollen diversity was related to landscape diversity. However, we found a strong seasonal variation in the amount and diversity of collected pollen in all sites independent of landscape diversity. The observed increase in foraging distances with decreasing landscape diversity suggests that honey bees compensated for lower landscape diversity by increasing their pollen foraging range in order to maintain pollen amount and diversity. Our results underscore the importance of a diverse pollen diet for honey bee colonies. Agri-environmental schemes aiming to support pollinators should focus on possible spatial and temporal gaps in pollen availability and diversity in agricultural landscapes.

  2. Honey bee foraging ecology: Season but not landscape diversity shapes the amount and diversity of collected pollen.

    Directory of Open Access Journals (Sweden)

    Nadja Danner

    Full Text Available The availability of pollen in agricultural landscapes is essential for the successful growth and reproduction of honey bee colonies (Apis mellifera L.. The quantity and diversity of collected pollen can influence the growth and health of honey bee colonies, but little is known about the influence of landscape structure on pollen diet. In a field experiment, we rotated 16 honey bee colonies across 16 agricultural landscapes, used traps to collect samples of collected pollen and observed intra-colonial dance communication to gain information about foraging distances. DNA metabarcoding was applied to analyze mixed pollen samples. Neither the amount of collected pollen nor pollen diversity was related to landscape diversity. However, we found a strong seasonal variation in the amount and diversity of collected pollen in all sites independent of landscape diversity. The observed increase in foraging distances with decreasing landscape diversity suggests that honey bees compensated for lower landscape diversity by increasing their pollen foraging range in order to maintain pollen amount and diversity. Our results underscore the importance of a diverse pollen diet for honey bee colonies. Agri-environmental schemes aiming to support pollinators should focus on possible spatial and temporal gaps in pollen availability and diversity in agricultural landscapes.

  3. Transgenic soybean pollen (Glycine max L.) in honey from the Yucatán peninsula, Mexico.

    Science.gov (United States)

    Villanueva-Gutiérrez, R; Echazarreta-González, C; Roubik, D W; Moguel-Ordóñez, Y B

    2014-02-07

    Using precise pollen species determination by conventional microscopic methods, accompanied by molecular genetic markers, we found bees collect GMO (genetically modified) soybean pollen and incorporate it in Yucatan honey. Honey comb samples from Las Flores, Campeche, Mexico, often contained soybean pollen. Pollen in honey was analyzed in nine samples; six contained substantial soy pollen and two tested positive for soybean GMO. Our analyses confirm field observations that honey bees, Apis mellifera, gather soybean pollen and nectar. The resultant risk for honey production in the Yucatán Peninsula and Mexico is evident in wholesale price reduction of 12% when GMO products are detected and honey consignments are rejected. Although this affects only 1% of current export honey (2011-2013) GMO soybean is an unacknowledged threat to apiculture and its economics in one of the world's foremost honey producing areas.

  4. Development of a proxy for past surface UV-B irradiation : A thermally assisted hydrolysis and methylation py-GC/MS method for the analysis of pollen and spores

    NARCIS (Netherlands)

    Blokker, Peter; Yeloff, Dan; Boelen, Peter; Broekman, Rob A; Rozema, Jelte

    2005-01-01

    A method was developed for the analysis of the UV-absorbing sporopollenin monomers p-coumaric acid and ferulic acid in very low numbers of pollen. This enables the analysis of pollen or spores from cultured plants, from herbarium collections, and from sediment, soil, and peat cores. The method

  5. Pollen analyses of Pleistocene hyaena coprolites from Montenegro and Serbia

    Directory of Open Access Journals (Sweden)

    Argant Jacqueline

    2007-01-01

    Full Text Available The results of pollen analyses of hyaena coprolites from the Early Pleistocene cave of Trlica in northern Montenegro and the Late Pleistocene cave of Baranica in southeast Serbia are described. The Early Pleistocene Pachycrocuta brevirostris, and the Late Pleistocene Crocuta spelaea are coprolite-producing species. Although the pollen concentration was rather low, the presented analyses add considerably to the much-needed knowledge of the vegetation of the central Balkans during the Pleistocene. Pollen extracted from a coprolite from the Baranica cave indicates an open landscape with the presence of steppe taxa, which is in accordance with the recorded conditions and faunal remains. Pollen analysis of the Early Pleistocene samples from Trlica indicate fresh and temperate humid climatic conditions, as well as the co-existence of several biotopes which formed a mosaic landscape in the vicinity of the cave.

  6. Impacts of air pollution exposure on the allergenic properties of Arizona cypress pollens

    Science.gov (United States)

    Shahali, Y.; Pourpak, Z.; Moin, M.; Zare, A.; Majd, A.

    2009-02-01

    Epidemiological studies have demonstrated that urbanization and high levels of vehicle emissions correlated with the increasing trend of pollen-induced respiratory allergies. Numerous works have investigated the role of pollutants in the pathogenesis of respiratory diseases but impacts of anthropogenic pollution on pollen allergenic properties are still poorly understood. The objective of this survey was to evaluate impacts of the traffic-related pollution on the structure and allergenic protein content of Arizona cypress (Cupressus arizonica, CA) pollens, recognized as a rising cause of seasonal allergy in various regions worldwide. According to our results, traffic-related air pollution by its direct effects on the elemental composition of pollens considerably increased the fragility of the pollen exine, causing numerous cracks in its surface and facilitating pollen content liberation. Pollen grains were also covered by numerous submicronic orbicules which may act as effective vectors for pollen-released components into the lower regions of respiratory organs. On the other hand, this study provides us reliable explications about the low efficiency of standard commercial allergens in the diagnosis of the Arizona cypress pollen allergy in Tehran. Although traffic related pollution affects the allergenic components of CA pollens, the repercussions on the respiratory health of urban populations have yet to be clarified and need further investigations.

  7. On the causes of variability in amounts of airborne grass pollen in Melbourne, Australia

    Science.gov (United States)

    de Morton, Julian; Bye, John; Pezza, Alexandre; Newbigin, Edward

    2011-07-01

    In Melbourne, Australia, airborne grass pollen is the predominant cause of hay fever (seasonal rhinitis) during late spring and early summer, with levels of airborne grass pollen also influencing hospital admissions for asthma. In order to improve predictions of conditions that are potentially hazardous to susceptible individuals, we have sought to better understand the causes of diurnal, intra-seasonal and inter-seasonal variability of atmospheric grass pollen concentrations (APC) by analysing grass pollen count data for Melbourne for 16 grass pollen seasons from 1991 to 2008 (except 1994 and 1995). Some of notable features identified in this analysis were that on days when either extreme (>100 pollen grains m-3) or high (50-100 pollen grains m-3) levels of grass pollen were recorded the winds were of continental origin. In contrast, on days with a low ( 100 pollen grains m-3) during the study period were characterised by an average downward vertical wind anomaly in the surface boundary layer over Melbourne. Together these findings form a basis for a fine resolution atmospheric general circulation model for grass pollen in Melbourne's air that can be used to predict daily (and hourly) APC. This information will be useful to those sectors of Melbourne's population that suffer from allergic problems.

  8. Impacts of air pollution exposure on the allergenic properties of Arizona cypress pollens

    International Nuclear Information System (INIS)

    Shahali, Y; Pourpak, Z; Moin, M; Zare, A; Majd, A

    2009-01-01

    Epidemiological studies have demonstrated that urbanization and high levels of vehicle emissions correlated with the increasing trend of pollen-induced respiratory allergies. Numerous works have investigated the role of pollutants in the pathogenesis of respiratory diseases but impacts of anthropogenic pollution on pollen allergenic properties are still poorly understood. The objective of this survey was to evaluate impacts of the traffic-related pollution on the structure and allergenic protein content of Arizona cypress (Cupressus arizonica, CA) pollens, recognized as a rising cause of seasonal allergy in various regions worldwide. According to our results, traffic-related air pollution by its direct effects on the elemental composition of pollens considerably increased the fragility of the pollen exine, causing numerous cracks in its surface and facilitating pollen content liberation. Pollen grains were also covered by numerous submicronic orbicules which may act as effective vectors for pollen-released components into the lower regions of respiratory organs. On the other hand, this study provides us reliable explications about the low efficiency of standard commercial allergens in the diagnosis of the Arizona cypress pollen allergy in Tehran. Although traffic related pollution affects the allergenic components of CA pollens, the repercussions on the respiratory health of urban populations have yet to be clarified and need further investigations.

  9. Sampling and sample handling procedures for priority pollutants in surface coal mining wastewaters. [Detailed list to be analyzed for

    Energy Technology Data Exchange (ETDEWEB)

    Hayden, R. S.; Johnson, D. O.; Henricks, J. D.

    1979-03-01

    The report describes the procedures used by Argonne National Laboratory to sample surface coal mine effluents in order to obtain field and laboratory data on 110 organic compounds or classes of compounds and 14 metals and minerals that are known as priority pollutants, plus 5-day biochemical oxygen demand (BOD/sub 5/), total organic carbon (TOC), chemical oxygen demand (COD), total dissolved solids (TDS), and total suspended solids (TSS). Included are directions for preparation of sampling containers and equipment, methods of sampling and sample preservation, and field and laboratory protocols, including chain-of-custody procedures. Actual analytical procedures are not described, but their sources are referenced.

  10. Airborne pollen and fungal spores in Garki, Abuja (North-Central Nigeria)

    OpenAIRE

    Ezike, Dimphna Nneka; Nnamani, Catherine V.; Ogundipe, Oluwatoyin T.; Adekanmbi, Olushola H.

    2016-01-01

    The ambient atmosphere is dominated with pollen and spores, which trigger allergic reactions and diseases and impact negatively on human health. A survey of pollen and fungal spores constituents of the atmosphere of Garki, Abuja (North-Central Nigeria) was carried out for 1?year (June 1, 2011?May 31, 2012). The aim of the study was to determine the prevalence and abundance of pollen and fungal spores in the atmosphere and their relationship with meteorological parameters. Airborne samples wer...

  11. Combining Multivariate Analysis and Pollen Count to Classify Honey Samples Accordingly to Different Botanical Origins Clasificación del Origen Botánico de la Miel Mediante la Combinación de Análisis Multivariado y Recuento de Polen

    Directory of Open Access Journals (Sweden)

    Eduardo Corbella

    2008-03-01

    Full Text Available This study reports the combination of multivariate techniques and pollen count analysis to classify honey samples accordingly to botanical sources, in samples from Uruguay. Honey samples from different botanical origins, namely Eucalyptus spp. (n = 10, Lotus spp. (n = 12, Salix spp. (n = 5, “mil flores” (Myrtaceae spp. (n = 12 and coronilla (Scutia buxifolia Reissek (n = 10 were analysed using Melissopalynology (pollen identification. Principal component analysis (PCA and linear discriminant analysis (LDA were used to classify the honey samples accordingly to their botanical origin based on a pollen count. Honey samples of higher percentage (> 70% of Eucalyptus, Lotus and Scutia pollen were 100% correctly classified, whilst samples from Myrtaceaespp. and Salix were 80 and 66% correctly classified, respectively. The use of PCA and LDA combined with pollen identification proved useful in characterizing honey samples from different botanical originsEste estudio reporta la combinación de técnicas de análisis multivariado y de polen para clasificar el origen botánico de muestras de miel provenientes de Uruguay. Muestras de miel de diversos orígenes botánicos, a saber Eucaliptus spp. (n = 10, Lotus spp. (n = 12, Salix spp. (n = 5, mil flores (Myrtaceae spp. (n = 12 y coronilla (Scutia buxifolia Reissek (n = 10 fueron analizadas usando Melisopalinología (identificación del polen. Análisis de componentes principales (APC y de discriminantes lineales (ADL fueron utilizados para clasificar las muestras de la miel de acuerdo a su origen botánico basado en el conteo de polen. Las muestras de miel que contenían más de un 70% de polen de Eucaliptus, Lotus y Scutia buxifolia fueron clasificadas correctamente en un 100% de los casos. Mientras que las muestras de miel identificadas como de Myrtaceae spp. y Salix fueron clasificadas correctamente en un 80 y 66% de los casos. El uso de APC y de ADL combinado con la identificación del polen prob

  12. FAGALES POLLEN IN THE ATMOSPHERE OF TIMIŞOARA, ROMANIA (2000-2007

    Directory of Open Access Journals (Sweden)

    Nicoleta IANOVICI

    2013-12-01

    Full Text Available This work presents the first aerobiological monitoring results for Fagales in the city of Timişoara (Romania using a volumetric spore-trap (Lanzoni VPPS 2000 which is now the most commonly used aerobiologic measurement instrument in Europe. The aim of this study was to determine characteristics of Fagales pollen occurrence in outdoor environment of Timişoara by measuring daily pollen concentrations. The concept of the atmospheric pollen season was used. Sampling was carried out during 8 years, starting in 2000 until 2007. Fagales allergenic pollen appear in the area of Timişoara only from the end of January to the end of May. The data showed that during the early spring the atmospheric pollen season for these allergenic species is highly variable. There were considerable variations in start date, atmospheric pollen season, peak concentration, date of peak. The concentration of airborne Fagales pollen in Timişoara and the correlations with some meteorological parameters have been examined. Daily pollen concentrations presented negative correlation with daily average relative humidity, and slightly positive with wind speed using Spearman’s correlation coefficients. Fagales pollen concentrations represent important values in the atmosphere of Timişoara, which means they may to cause pollinosis in its population. The best-represented pollen type through the entire period was Betula.

  13. Temperature sensitivity of a numerical pollen forecast model

    Science.gov (United States)

    Scheifinger, Helfried; Meran, Ingrid; Szabo, Barbara; Gallaun, Heinz; Natali, Stefano; Mantovani, Simone

    2016-04-01

    Allergic rhinitis has become a global health problem especially affecting children and adolescence. Timely and reliable warning before an increase of the atmospheric pollen concentration means a substantial support for physicians and allergy suffers. Recently developed numerical pollen forecast models have become means to support the pollen forecast service, which however still require refinement. One of the problem areas concerns the correct timing of the beginning and end of the flowering period of the species under consideration, which is identical with the period of possible pollen emission. Both are governed essentially by the temperature accumulated before the entry of flowering and during flowering. Phenological models are sensitive to a bias of the temperature. A mean bias of -1°C of the input temperature can shift the entry date of a phenological phase for about a week into the future. A bias of such an order of magnitude is still possible in case of numerical weather forecast models. If the assimilation of additional temperature information (e.g. ground measurements as well as satellite-retrieved air / surface temperature fields) is able to reduce such systematic temperature deviations, the precision of the timing of phenological entry dates might be enhanced. With a number of sensitivity experiments the effect of a possible temperature bias on the modelled phenology and the pollen concentration in the atmosphere is determined. The actual bias of the ECMWF IFS 2 m temperature will also be calculated and its effect on the numerical pollen forecast procedure presented.

  14. Detection of airborne allergen (Pla a 1 in relation to Platanus pollen in Córdoba, South Spain

    Directory of Open Access Journals (Sweden)

    Purificación Alcázar

    2015-02-01

    Full Text Available Córdoba is one of the Spanish cities with the highest records of plane tree pollen grains in the air. Clinical studies have identified[i] Platanus[/i] as a major cause of pollinosis. This fact provokes an important public health problem during early spring when these trees bloom. The objective of the study is to evaluate the correlation between airborne pollen counts and Pla a 1 aeroallergen concentrations in Córdoba, to elucidate if airborne pollen can be an accurate measure that helps to explain the prevalence of allergenic symptoms. Pollen sampling was performed during 2011–2012 using a Hirst-type sampler. Daily average concentration of pollen grains (pollen grains/m 3 was obtained following the methodology proposed by the Spanish Aerobiology Network. A multi-vial cyclone was used for the aeroallergen quantification. Allergenic particles were measured by ELISA using specific antibodies Pla a 1. The trend of[i] Platanus[/i] pollen was characterized by a marked seasonality, reaching high concentrations in a short period of time. Airborne pollen and aeroallergen follow similar trends. The overlapping profile between both variables during both years shows that pollen and Pla a 1 are significantly correlated. The highest significant correlation coefficients were obtained during 2011 and for the post peak. Although some studies have found notable divergence between pollen and allergen concentrations in the air, in the case of [i]Platanus[/i] in Córdoba, similar aerobiological dynamics between pollen and Pla a 1 have been found. Allergenic activity was found only during the plane tree pollen season, showing a close relationship with daily pollen concentrations. The obtained pollen potency was similar for both years of study. The results suggest that the allergenic response in sensitive patients to plane tree pollen coincide with the presence and magnitude of airborne pollen.

  15. Quality-control design for surface-water sampling in the National Water-Quality Network

    Science.gov (United States)

    Riskin, Melissa L.; Reutter, David C.; Martin, Jeffrey D.; Mueller, David K.

    2018-04-10

    The data-quality objectives for samples collected at surface-water sites in the National Water-Quality Network include estimating the extent to which contamination, matrix effects, and measurement variability affect interpretation of environmental conditions. Quality-control samples provide insight into how well the samples collected at surface-water sites represent the true environmental conditions. Quality-control samples used in this program include field blanks, replicates, and field matrix spikes. This report describes the design for collection of these quality-control samples and the data management needed to properly identify these samples in the U.S. Geological Survey’s national database.

  16. Pollen rain and pollen representation across a forest-páramo ecotone in northern Ecuador

    NARCIS (Netherlands)

    Moscol Olivera, M.; Duivenvoorden, J.F.; Hooghiemstra, H.

    2009-01-01

    Modern pollen spectra were studied in forest and páramo vegetation from the Guandera area, northern Ecuador. Pollen representation was estimated by comparing the presence of plant taxa from a recent vegetation survey with the pollen spectra in moss polsters and pollen traps. In total, 73 pollen taxa

  17. Anemophilous plant pollen in spring specific honeys from the Rzeszów area

    Directory of Open Access Journals (Sweden)

    Katarzyna Ceglińska

    2012-12-01

    Full Text Available The present study comprises pollen analyses of 23 samples of spring specific honeys collected from apiaries situated in 12 communes in the Rzeszów area during the 2005-2006 apicultural season. Forty two pollen taxa were identified in the examined material, of which 31 nectariferous and 11 non-nectariferous anemophilous plants. Among the nectariferous plants, the highest pollen frequency was found for Brassicaceae (others (95.7%, Rubus type (91.3% and Prunus type (86.9%. The presence of anemophilous pollen grains was recorded in all the samples, with Poaceae reaching the highest frequency (69.8%. The frequency of over 50% was characteristic of Quercus and Rumex, while the lowest frequency (less than 10% was recorded for Cerealia, Corylus avellana and Humulus lupulus. The highest participation was found for Quercus, whose pollen grains constituted as much as 80% of anemophilous pollen grains in a single sample. The lowest participation (below 3% was found for Rumex, Pinus and Artemisia. Among all the taxa of pollen grains found in a single sample, Poaceae pollen reached the highest share of anemophilous pollen in a sample of honey from fruit trees (10%, whereas Quercus pollen in one honey from Brassica napus (7.8% and in one honey from Acer (4.5%. The pollen share of the remaining anemophilous taxa in the examined honeys ranged between 0.2% and 2.9%. The identified anemophilous taxa belong to 10 botanical families. In 19 out of 23 examined samples of honeys, small indicators of honeydew were discovered.

  18. Lessons learned from surface wipe sampling for lead in three workplaces.

    Science.gov (United States)

    Beaucham, Catherine; Ceballos, Diana; King, Bradley

    2017-08-01

    Surface wipe sampling in the occupational environment is a technique widely used by industrial hygienists. Although several organizations have promulgated standards for sampling lead and other metals, uncertainty still exists when trying to determine an appropriate wipe sampling strategy and how to interpret sampling results. Investigators from the National Institute for Occupational Safety and Health (NIOSH) Health Hazard Evaluation Program have used surface wipe sampling as part of their exposure assessment sampling strategies in a wide range of workplaces. This article discusses wipe sampling for measuring lead on surfaces in three facilities: (1) a battery recycling facility; (2) a firing range and gun store; and (3) an electronic scrap recycling facility. We summarize our findings from the facilities and what we learned by integrating wipe sampling into our sampling plan. Wiping sampling demonstrated lead in non-production surfaces in all three workplaces and that the potential that employees were taking lead home to their families existed. We also found that the presence of metals such as tin can interfere with the colorimetric results. We also discuss the advantages and disadvantages of colorimetric analysis of surface wipe samples and the challenges we faced when interpreting wipe sampling results.

  19. CHARACTERIZATION OF THE MAIZE POLLEN TRANSCRIPTOME

    Science.gov (United States)

    Pollen is a primary vehicle for transgene flow from engineered plants to their non-transgenic, native or weedy relatives. Hence, gene flow will be affected by pollen fitness (e.g., how well a particular pollen grain can outcompete other pollen present on the stigma and complete ...

  20. Recovery efficiency and limit of detection of aerosolized Bacillus anthracis Sterne from environmental surface samples.

    Science.gov (United States)

    Estill, Cheryl Fairfield; Baron, Paul A; Beard, Jeremy K; Hein, Misty J; Larsen, Lloyd D; Rose, Laura; Schaefer, Frank W; Noble-Wang, Judith; Hodges, Lisa; Lindquist, H D Alan; Deye, Gregory J; Arduino, Matthew J

    2009-07-01

    After the 2001 anthrax incidents, surface sampling techniques for biological agents were found to be inadequately validated, especially at low surface loadings. We aerosolized Bacillus anthracis Sterne spores within a chamber to achieve very low surface loading (ca. 3, 30, and 200 CFU per 100 cm(2)). Steel and carpet coupons seeded in the chamber were sampled with swab (103 cm(2)) or wipe or vacuum (929 cm(2)) surface sampling methods and analyzed at three laboratories. Agar settle plates (60 cm(2)) were the reference for determining recovery efficiency (RE). The minimum estimated surface concentrations to achieve a 95% response rate based on probit regression were 190, 15, and 44 CFU/100 cm(2) for sampling steel surfaces and 40, 9.2, and 28 CFU/100 cm(2) for sampling carpet surfaces with swab, wipe, and vacuum methods, respectively; however, these results should be cautiously interpreted because of high observed variability. Mean REs at the highest surface loading were 5.0%, 18%, and 3.7% on steel and 12%, 23%, and 4.7% on carpet for the swab, wipe, and vacuum methods, respectively. Precision (coefficient of variation) was poor at the lower surface concentrations but improved with increasing surface concentration. The best precision was obtained with wipe samples on carpet, achieving 38% at the highest surface concentration. The wipe sampling method detected B. anthracis at lower estimated surface concentrations and had higher RE and better precision than the other methods. These results may guide investigators to more meaningfully conduct environmental sampling, quantify contamination levels, and conduct risk assessment for humans.

  1. Recovery Efficiency and Limit of Detection of Aerosolized Bacillus anthracis Sterne from Environmental Surface Samples

    Science.gov (United States)

    Estill, Cheryl Fairfield; Baron, Paul A.; Beard, Jeremy K.; Hein, Misty J.; Larsen, Lloyd D.; Rose, Laura; Schaefer, Frank W.; Noble-Wang, Judith; Hodges, Lisa; Lindquist, H. D. Alan; Deye, Gregory J.; Arduino, Matthew J.

    2009-01-01

    After the 2001 anthrax incidents, surface sampling techniques for biological agents were found to be inadequately validated, especially at low surface loadings. We aerosolized Bacillus anthracis Sterne spores within a chamber to achieve very low surface loading (ca. 3, 30, and 200 CFU per 100 cm2). Steel and carpet coupons seeded in the chamber were sampled with swab (103 cm2) or wipe or vacuum (929 cm2) surface sampling methods and analyzed at three laboratories. Agar settle plates (60 cm2) were the reference for determining recovery efficiency (RE). The minimum estimated surface concentrations to achieve a 95% response rate based on probit regression were 190, 15, and 44 CFU/100 cm2 for sampling steel surfaces and 40, 9.2, and 28 CFU/100 cm2 for sampling carpet surfaces with swab, wipe, and vacuum methods, respectively; however, these results should be cautiously interpreted because of high observed variability. Mean REs at the highest surface loading were 5.0%, 18%, and 3.7% on steel and 12%, 23%, and 4.7% on carpet for the swab, wipe, and vacuum methods, respectively. Precision (coefficient of variation) was poor at the lower surface concentrations but improved with increasing surface concentration. The best precision was obtained with wipe samples on carpet, achieving 38% at the highest surface concentration. The wipe sampling method detected B. anthracis at lower estimated surface concentrations and had higher RE and better precision than the other methods. These results may guide investigators to more meaningfully conduct environmental sampling, quantify contamination levels, and conduct risk assessment for humans. PMID:19429546

  2. Flavonoids, alkali earth and rare earth elements affect germination of pecan pollen

    Science.gov (United States)

    The factors regulating pecan [Carya illinoinensis (Wangenh.) K. Koch] pollen grain germination on receptive stigmatic flower surfaces in vivo or in vitro in pollen viability assays are poorly understood. While there are many potential regulating factors, there is evidence for involvement of flavonol...

  3. Storage Effects on Sample Integrity of Environmental Surface Sampling Specimens with Bacillus anthracis Spores.

    Science.gov (United States)

    Perry, K Allison; O'Connell, Heather A; Rose, Laura J; Noble-Wang, Judith A; Arduino, Matthew J

    The effect of packaging, shipping temperatures and storage times on recovery of Bacillus anthracis . Sterne spores from swabs was investigated. Macrofoam swabs were pre-moistened, inoculated with Bacillus anthracis spores, and packaged in primary containment or secondary containment before storage at -15°C, 5°C, 21°C, or 35°C for 0-7 days. Swabs were processed according to validated Centers for Disease Control/Laboratory Response Network culture protocols, and the percent recovery relative to a reference sample (T 0 ) was determined for each variable. No differences were observed in recovery between swabs held at -15° and 5°C, (p ≥ 0.23). These two temperatures provided significantly better recovery than swabs held at 21°C or 35°C (all 7 days pooled, p ≤ 0.04). The percent recovery at 5°C was not significantly different if processed on days 1, 2 or 4, but was significantly lower on day 7 (day 2 vs. 7, 5°C, 10 2 , p=0.03). Secondary containment provided significantly better percent recovery than primary containment, regardless of storage time (5°C data, p ≤ 0.008). The integrity of environmental swab samples containing Bacillus anthracis spores shipped in secondary containment was maintained when stored at -15°C or 5°C and processed within 4 days to yield the optimum percent recovery of spores.

  4. Pollen aroma fingerprint of two sunflower (Helianthus annuus L.) genotypes characterized by different pollen colors.

    Science.gov (United States)

    Bertoli, Alessandra; Fambrini, Marco; Doveri, Silvia; Leonardi, Michele; Pugliesi, Claudio; Pistelli, Luisa

    2011-09-01

    Samples of fresh pollen grains, collected from capitula in full bloom from two genotypes of sunflower (Helianthus annuus L.) and characterized by a different color, i.e., white-cream (WC) and orange (O), were analyzed by the HS-SPME (headspacesolid phase microextraction)/GC/MS technique. This study defined for the first time the fingerprint of the sunflower pollen, separated from the disc flowers, to define its contribution to the inflorescence aroma. In the GC/MS fingerprints of the WC and O genotypes, 61 and 62 volatile compounds were identified, respectively. Monoterpene hydrocarbons (34% in O vs. 28% in WC) and sesquiterpene hydrocarbons (37% in O vs. 31% in WC) were ubiquitous in all samples analyzed and represented the main chemical classes. α-Pinene (21% in O vs. 20% in WC) and sabinene (11% in O vs. 6% in WC) were the dominant volatiles, but also a full range of aliphatic hydrocarbons and their oxygenated derivatives gave a decisive contribution to the aroma composition (10% in O vs. 12% in WC). In addition, dendrolasin (3% in O vs. 4% in WC) and some minor constituents such as (E)-hex-2-en-1-ol (0.4% in O vs. 0.1% in WC) were pointed out not only for their contribution to the pollen scent, but also for their well-known role in the plant ecological relationships. Having evaluated two pollen morphs with different carotenoid-based colors, the study sought to highlight also the presence of some volatile precursors or derivatives of these pigments in the aroma. However, the pollen aroma of the two selected genotypes made a specific chemical contribution to the sunflower inflorescence scent without any influence on carotenoid derivatives. 2011 Verlag Helvetica Chimica Acta AG, Zürich.

  5. Environmental Factors Affecting Asthma and Allergies: Predicting and Simulating Downwind Exposure to Airborne Pollen

    Science.gov (United States)

    Luvall, Jeffrey; Estes, Sue; Sprigg, William A.; Nickovic, Slobodan; Huete, Alfredo; Solano, Ramon; Ratana, Piyachat; Jiang, Zhangyan; Flowers, Len; Zelicoff, Alan

    2009-01-01

    This slide presentation reviews the environmental factors that affect asthma and allergies and work to predict and simulate the downwind exposure to airborne pollen. Using a modification of Dust REgional Atmosphere Model (DREAM) that incorporates phenology (i.e. PREAM) the aim was to predict concentrations of pollen in time and space. The strategy for using the model to simulate downwind pollen dispersal, and evaluate the results. Using MODerate-resolution Imaging Spectroradiometer (MODIS), to get seasonal sampling of Juniper, the pollen chosen for the study, land cover on a near daily basis. The results of the model are reviewed.

  6. Storage Effects on Sample Integrity of Environmental Surface Sampling Specimens with Bacillus anthracis Spores

    Science.gov (United States)

    Perry, K. Allison; O’Connell, Heather A.; Rose, Laura J.; Noble-Wang, Judith A.; Arduino, Matthew J.

    2016-01-01

    The effect of packaging, shipping temperatures and storage times on recovery of Bacillus anthracis. Sterne spores from swabs was investigated. Macrofoam swabs were pre-moistened, inoculated with Bacillus anthracis spores, and packaged in primary containment or secondary containment before storage at −15°C, 5°C, 21°C, or 35°C for 0–7 days. Swabs were processed according to validated Centers for Disease Control/Laboratory Response Network culture protocols, and the percent recovery relative to a reference sample (T0) was determined for each variable. No differences were observed in recovery between swabs held at −15° and 5°C, (p ≥ 0.23). These two temperatures provided significantly better recovery than swabs held at 21°C or 35°C (all 7 days pooled, p ≤ 0.04). The percent recovery at 5°C was not significantly different if processed on days 1, 2 or 4, but was significantly lower on day 7 (day 2 vs. 7, 5°C, 102, p=0.03). Secondary containment provided significantly better percent recovery than primary containment, regardless of storage time (5°C data, p ≤ 0.008). The integrity of environmental swab samples containing Bacillus anthracis spores shipped in secondary containment was maintained when stored at −15°C or 5°C and processed within 4 days to yield the optimum percent recovery of spores. PMID:27213119

  7. Use of plots to define pollen-vegetation relationships in densely forested ecosystems of Tropical Africa.

    Science.gov (United States)

    Elenga; de Namur C; Vincens; Roux; Schwartz

    2000-10-01

    Modern soil samples from South Congo were analyzed for pollen content and compared to forest inventories to define modern pollen-vegetation relationships. A correspondence analysis (CA) was applied independently to botanical and pollen data and a hierarchical cluster analysis to pollen data only. Subsequently, a CA using a presence-absence approach has been made to directly compare the two types of data. Results show that the pollen rain and floristic composition of the sampled sites are not directly linked to altitudinal or precipitation gradients, but clear evidence of variation in relation to hygromorphy and soil type is detected. The forests occurring in swampy environments are well differentiated from the forests developed on well-drained soils by pollen and floristic data. Among forests on well-drained soils, a good distinction can be made between those growing on sandy soils and those growing on ferralitic soils. The comparison between pollen spectra and vegetation shows site-to-site variations in pollen assemblages in relation to the floristic heterogeneity of forests, and it appears that few taxa show a good correlation between plant cover and pollen abundance.

  8. Pollen germination and pollen tube growth in ZP maize lines

    Directory of Open Access Journals (Sweden)

    Cerović Radosav

    2014-01-01

    Full Text Available The study was conducted on the in vitro pollen germination at 26°, 28°, 32° and 35°C for 24h of male parental lines, pollen tube growth in vivo in cross pollination of female and male parental lines that make couples in four hybrids: ZP 504 su (♀ ZPPL 51 × ♂ ZPPL 67; ZP 677 (♀ ZPPL 17 × ♂ ZPPL 201; ZP 704 (♀ ZPPL 109 × ♂ ZPPL 79, ZP 611 k (♀ ZPPL 126 × ♂ ZPPL 105, and the open pollination of female parental lines of the above mentioned hybrids. Pollen germination in vitro and pollen tube growth dynamics in vivo showed different genotypic specificities with the tests applied. The obtained results were discussed in the context of reproductive biology of ZP maize lines and aimed to create the preconditions for successful management and direction of the process in practice - seed production in certain environmental conditions.

  9. Changes in Modern Pollen Assemblages and Soil Geochemistry along Coastal Environmental Gradients in the Everglades of South Florida

    Directory of Open Access Journals (Sweden)

    Qiang Yao

    2018-01-01

    Full Text Available This study aims to document the changes in modern pollen assemblages and soil elemental chemistry along broad edaphic, hydrological, and salinity gradients, including a previously undocumented secondary environmental gradient, in a vast mangrove-dominated wetland region in the Everglades, South Florida. Twenty-five soil surface samples were collected along an interior wetland transect and an estuarine mangrove transect across coastal zones in the Everglades National Park and subjected to palynological and XRF analyses. Modern pollen spectra from the sampling sites were classified into five a priori groups—wet prairie, pineland, inland mangroves, coastal mangroves, and fringe mangroves, based on the five vegetation types and sub-environments from which they were collected. Discriminant analysis shows that all (100% of the samples are correctly classified into their a priori groups. On a broad scale, the modern pollen assemblages in surface samples collected from different vegetation types reflect the primary environmental gradient in the Florida Coastal Everglades. A distinct salinity and chemical gradient is also recorded in the XRF results, and the complexity of these gradients is captured at both regional and local scales. At the regional scale, concentrations of all the elements increase from terrestrial toward coastal sites. At the local scale, XRF results show a progressive decrease in most chemical concentrations and in the Cl/Br and Ca/Ti ratios away from the Shark River Slough at each individual site, suggesting that a secondary fluvial/tidal gradient also exists locally as a function of the distance from the river, the main carrier of these chemicals. This study provides new evidence to show that tidal flooding from the Shark River Estuary is directly related to the nutrient availability in the surrounding mangrove forests. These data will deepen our understanding of the environmental drivers behind the vegetation zonation in the

  10. AFM fluid delivery/liquid extraction surface sampling/electrostatic spray cantilever probe

    Science.gov (United States)

    Van Berkel, Gary J.

    2015-06-23

    An electrospray system comprises a liquid extraction surface sampling probe. The probe comprises a probe body having a liquid inlet and a liquid outlet, and having a liquid extraction tip. A solvent delivery conduit is provided for receiving solvent liquid from the liquid inlet and delivering the solvent liquid to the liquid extraction tip. An open liquid extraction channel extends across an exterior surface of the probe body from the liquid extraction tip to the liquid outlet. An electrospray emitter tip is in liquid communication with the liquid outlet of the liquid extraction surface sampling probe. A system for analyzing samples, a liquid junction surface sampling system, and a method of analyzing samples are also disclosed.

  11. Pollensomes as Natural Vehicles for Pollen Allergens.

    Science.gov (United States)

    Prado, Noela; De Linares, Concepción; Sanz, María L; Gamboa, Pedro; Villalba, Mayte; Rodríguez, Rosalía; Batanero, Eva

    2015-07-15

    Olive (Olea europaea) pollen constitutes one of the most important allergen sources in the Mediterranean countries and some areas of the United States, South Africa, and Australia. Recently, we provided evidence that olive pollen releases nanovesicles of respirable size, named generically pollensomes, during in vitro germination. Olive pollensomes contain allergens, such as Ole e 1, Ole e 11, and Ole e 12, suggesting a possible role in allergy. The aim of this study was to assess the contribution of pollensomes to the allergic reaction. We show that pollensomes exhibit allergenic activity in terms of patients' IgE-binding capacity, human basophil activation, and positive skin reaction in sensitized patients. Furthermore, allergen-containing pollensomes have been isolated from three clinically relevant nonphylogenetically related species: birch (Betula verrucosa), pine (Pinus sylvestris), and ryegrass (Lolium perenne). Most interesting, pollensomes were isolated from aerobiological samples collected with an eight-stage cascade impactor collector, indicating that pollensomes secretion is a naturally occurring phenomenon. Our findings indicate that pollensomes may represent widespread vehicles for pollen allergens, with potential implications in the allergic reaction. Copyright © 2015 by The American Association of Immunologists, Inc.

  12. Effect of temperature and duration of maize pollen storage on the seed set rate

    Directory of Open Access Journals (Sweden)

    Babić Vojka

    2017-01-01

    Full Text Available In plant breeding programs, it is often necessary to cross genotypes incompatible in time of flowering. In maize, when the incompatibility in flowering period could not be overcome by different sowing dates, or by the ability of silk to preserve its fertility in 10-15 days, conservation of pollen could be of great importance. For many plant species, the appropriate methods for pollen management have been set up, including methods of collecting, desiccation, testing of viability and longevity, as well as for pollen storage. The longevity of pollen during its storage depends upon plant species, conditions at the time of pollen collecting, pollen moisture content, as well as upon storage temperature and duration. Even within the same plant species, different genotypes exhibit different level of viability preservation during the conservation. Although maize pollen belongs to a tricellular pollen group and rapidly loses viability under field conditions, its preservation is possible. According to the literature, pollen viability could be preserved for 30 days in the conditions of refrigerator (+4°C, while in liquid nitrogen (-196°C up to 120 days. In the majority of studies, pollen viability was evaluated in the laboratory conditions, and the results obtained could largely be differed from those obtained under field conditions, due to impossibility to control a number of environmental factors. This experiment was conducted under field conditions in order to evaluate the ability of pollen from commercial maize inbred line L217, stored under the conditions of +4°C and -20°C, to pollinate maize inbred L73B013 and produce grain. Inbred L73B013 is sown in five sowing dates in order to ensure the longer presence of fresh silk. Pollen samples from line L217 were taken twice, and along with silica gel, stored in refrigerator and freezer. Each of successive pollination included five silks. Except for the expected good ear seed set when silks were

  13. Pollen analysis of natural honeys from the central region of Shanxi, North China.

    Directory of Open Access Journals (Sweden)

    Xiao-Yan Song

    Full Text Available Based on qualitative and quantitative melissopalynological analyses, 19 Chinese honeys were classified by botanical origin to determine their floral sources. The honey samples were collected during 2010-2011 from the central region of Shanxi Province, North China. A diverse spectrum of 61 pollen types from 37 families was identified. Fourteen samples were classified as unifloral, whereas the remaining samples were multifloral. Bee-favoured families (occurring in more than 50% of the samples included Caprifoliaceae (found in 10 samples, Laminaceae (10, Brassicaceae (12, Rosaceae (12, Moraceae (13, Rhamnaceae (15, Asteraceae (17, and Fabaceae (19. In the unifloral honeys, the predominant pollen types were Ziziphus jujuba (in 5 samples, Robinia pseudoacacia (3, Vitex negundo var. heterophylla (2, Sophora japonica (1, Ailanthus altissima (1, Asteraceae type (1, and Fabaceae type (1. The absolute pollen count (i.e., the number of pollen grains per 10 g honey sample suggested that 13 samples belonged to Group I (<20,000 pollen grains, 4 to Group II (20,000-100,000, and 2 to Group III (100,000-500,000. The dominance of unifloral honeys without toxic pollen grains and the low value of the HDE/P ratio (i.e., honey dew elements/pollen grains from nectariferous plants indicated that the honey samples are of good quality and suitable for human consumption.

  14. Personalized symptoms forecasting for pollen-induced allergic rhinitis sufferers

    Science.gov (United States)

    Voukantsis, D.; Berger, U.; Tzima, F.; Karatzas, K.; Jaeger, S.; Bergmann, K. C.

    2015-07-01

    Hay fever is a pollen-induced allergic reaction that strongly affects the overall quality of life of many individuals. The disorder may vary in severity and symptoms depending on patient-specific factors such as genetic disposition, individual threshold of pollen concentration levels, medication, former immunotherapy, and others. Thus, information services that improve the quality of life of hay fever sufferers must address the needs of each individual separately. In this paper, we demonstrate the development of information services that offer personalized pollen-induced symptoms forecasts. The backbone of these services consists of data of allergic symptoms reported by the users of the Personal Hay Fever Diary system and pollen concentration levels (European Aeroallergen Network) in several sampling sites. Data were analyzed using computational intelligence methods, resulting in highly customizable forecasting models that offer personalized warnings to users of the Patient Hay Fever Diary system. The overall system performance for the pilot area (Vienna and Lower Austria) reached a correlation coefficient of r = 0.71 ± 0.17 (average ± standard deviation) in a sample of 219 users with major contribution to the Pollen Hay Fever Diary system and an overall performance of r = 0.66 ± 0.18 in a second sample of 393 users, with minor contribution to the system. These findings provide an example of combining data from different sources using advanced data engineering in order to develop innovative e-health services with the capacity to provide more direct and personalized information to allergic rhinitis sufferers.

  15. Commercial Bee Pollen with Different Geographical Origins: A Comprehensive Approach

    Directory of Open Access Journals (Sweden)

    Leticia M. Estevinho

    2012-09-01

    Full Text Available Since the primordial of humanity, pollen has been considered a good source of nutrients and energy. Its promising healing properties have also been referred to. The present study aimed to characterize, for the first time, eight commercial pollens from Portugal and Spain available on the market studying the legislation on labeling, pollinic origin, physicochemical and microbiological analyses and identification of yeasts. Eleven botanical families were found amongst the samples. The most abundant family and the most dominant pollen was Cistaceae. The moisture content, ash, aw, pH, reducing sugars, carbohydrates, proteins, lipids and energy were analyzed and the specific parameters were within the specifications required by some countries with legislation regarding these parameters. Microbiologically commercial pollen showed acceptable safety for the commercial quality and hygiene. All samples showed negative results for toxigenic species. The microorganisms studied were aerobic mesophiles, yeasts and moulds, coliforms, Escherichia coli, Staphylococcus aureus, Salmonella and sulfite-reducing Clostridium. During the work, six yeasts species were isolated from pollen, with Rhodotorula mucilaginosa being the most abundant, as it was present in four samples.

  16. Commercial Bee Pollen with Different Geographical Origins: A Comprehensive Approach

    Science.gov (United States)

    Nogueira, Carla; Iglesias, Antonio; Feás, Xesus; Estevinho, Leticia M.

    2012-01-01

    Since the primordial of humanity, pollen has been considered a good source of nutrients and energy. Its promising healing properties have also been referred to. The present study aimed to characterize, for the first time, eight commercial pollens from Portugal and Spain available on the market studying the legislation on labeling, pollinic origin, physicochemical and microbiological analyses and identification of yeasts. Eleven botanical families were found amongst the samples. The most abundant family and the most dominant pollen was Cistaceae. The moisture content, ash, aw, pH, reducing sugars, carbohydrates, proteins, lipids and energy were analyzed and the specific parameters were within the specifications required by some countries with legislation regarding these parameters. Microbiologically commercial pollen showed acceptable safety for the commercial quality and hygiene. All samples showed negative results for toxigenic species. The microorganisms studied were aerobic mesophiles, yeasts and moulds, coliforms, Escherichia coli, Staphylococcus aureus, Salmonella and sulfite-reducing Clostridium. During the work, six yeasts species were isolated from pollen, with Rhodotorula mucilaginosa being the most abundant, as it was present in four samples. PMID:23109845

  17. Relationships between airborne pollen grains, wind direction and land cover using GIS and circular statistics.

    Science.gov (United States)

    Maya-Manzano, J M; Sadyś, M; Tormo-Molina, R; Fernández-Rodríguez, S; Oteros, J; Silva-Palacios, I; Gonzalo-Garijo, A

    2017-04-15

    Airborne bio-aerosol content (mainly pollen and spores) depends on the surrounding vegetation and weather conditions, particularly wind direction. In order to understand this issue, maps of the main land cover in influence areas of 10km in radius surrounding pollen traps were created. Atmospheric content of the most abundant 14 pollen types was analysed in relation to the predominant wind directions measured in three localities of SW of Iberian Peninsula, from March 2011 to March 2014. Three Hirst type traps were used for aerobiological monitoring. The surface area for each land cover category was calculated and wind direction analysis was approached by using circular statistics. This method could be helpful for estimating the potential risk of exposure to various pollen types. Thus, the main land cover was different for each monitoring location, being irrigated crops, pastures and hardwood forests the main categories among 11 types described. Comparison of the pollen content with the predominant winds and land cover shows that the atmospheric pollen concentration is related to some source areas identified in the inventory. The study found that some pollen types (e.g. Plantago, Fraxinus-Phillyrea, Alnus) come from local sources but other pollen types (e.g. Quercus) are mostly coming from longer distances. As main conclusions, airborne particle concentrations can be effectively split by addressing wind with circular statistics. By combining circular statistics and GIS method with aerobiological data, we have created a useful tool for understanding pollen origin. Some pollen loads can be explained by immediate surrounding landscape and observed wind patterns for most of the time. However, other factors like medium or long-distance transport or even pollen trap location within a city, may occasionally affect the pollen load recorded using an air sampler. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. Pollen of Hawaiian Cyrtandra (Gesneriaceae) including notes on Southeast Asian taxa

    NARCIS (Netherlands)

    Luegmayr, Eva

    1993-01-01

    Pollen of 30 species and 12 hybrids (88 samples in total) of Hawaiian Cyrtandra, covering all 6 sections recognized on the Hawaiian archipelago, was examined using light, scanning and transmission electron microscopy. Hawaiian Cyrtandra is stenopalynous. The pollen grains are binucleate, isopolar,

  19. Pollen-based biome reconstructions for Latin America at 0, 6000 and 18 000 radiocarbon years

    NARCIS (Netherlands)

    Marchant, R.; Harrison, S.P.; Hooghiemstra, H.; Cleef, A.M.; Hammen, van der T.; Wille, M.

    2009-01-01

    The biomisation method is used to reconstruct Latin American vegetation at 6000±500 and 18 000±1000 radiocarbon years before present (14C yr BP) from pollen data. Tests using modern pollen data from 381 samples derived from 287 locations broadly reproduce potential natural vegetation. The strong

  20. Effect of gamma rays doses on pollen germination, polysiphony and pollen tube elongation in Pinus patula Schiede et Deppe

    International Nuclear Information System (INIS)

    Katiyar, S.R.; Chauhan, Y.S.

    1987-01-01

    The present study aimed to study the effects of gamma radiation ( 60 Co) on pollen germination and pollen tube elongation in Pinus patula. Pollen germination and pollen tube elongation are stimulated by low doses of radiation. Although higher doses of radiation inhibit the germination of pollen, pollen tube elongation remains unaffected. Thus in Pinus patula pollen tube elongation is less radiosensitive than pollen germination. Compared to control pollen, irradiated pollen produced more number of long pollen tubes. Therefore pollen tube size can be improved using low doses of radiation. (author). 15 refs., 5 figs., 2 tables

  1. Use of MODIS Satellite Images and an Atmospheric Dust Transport Model To Evaluate Juniperus spp. Pollen Phenology and Dispersal

    Science.gov (United States)

    Luvall, J. C.; Sprigg, W. A.; Levetin, Estelle; Huete, Alfredo; Nickovic, S.; Pejanovic, G. A.; Vukovic, A.; VandeWater, P. K.; Myers, O. B.; Budge, A. M.; hide

    2011-01-01

    Pollen can be transported great distances. Van de Water et. al., 2003 reported Juniperus spp. pollen was transported 200-600 km. Hence local observations of plant phenology may not be consistent with the timing and source of pollen collected by pollen sampling instruments. The DREAM (Dust REgional Atmospheric Model, Nickovic et al. 2001) is a verified model for atmospheric dust transport modeling using MODIS data products to identify source regions and quantities of dust. We are modifying the DREAM model to incorporate pollen transport. Pollen release will be estimated based on MODIS derived phenology of Juniperus spp. communities. Ground based observational records of pollen release timing and quantities will be used as verification. This information will be used to support the Centers for Disease Control and Prevention's National Environmental Public Health Tracking Program and the State of New Mexico environmental public health decision support for asthma and allergies alerts.

  2. General trends in airborne pollen production and pollination periods at a Mediterranean site (Badajoz, southwest Spain).

    Science.gov (United States)

    Tormo-Molina, R; Gonzalo-Garijo, M A; Silva-Palacios, I; Muñoz-Rodríguez, A F

    2010-01-01

    The aim of this study was to determine trends in the airborne pollen concentration and pollination period for the principal sources of pollen in Badajoz (southwest Spain) over 15 years of monitoring (1994-2008). Airborne pollen was monitored by continuous sampling with a Hirst volumetric sampler. Pollen trends were investigated by linear regression and correlation analysis using mean annual and monthly pollen concentrations. The aerobiological results were compared with meteorological data (temperature and rainfall). During the study period, the mean total annual rainfall was 66.2 mm lower than normal and the mean annual temperature 0.8 degrees C higher than normal. No temporal trend was found for total airborne pollen concentration, but differences were observed for monthly data, namely, an increase in January, February, and May and a decrease in March and June. For the different pollen types studied, there was a general trend toward increased values in the month with the highest values, and this trend seemed to be related to temperature.The beginning of the main pollen season occurred later, and the end occurred sooner; therefore, the main pollen season seems to be shorter. Our data reflect trends in the response of plants to changing rainfall stress patterns in Mediterranean countries, and these trends seem to be different from those of temperate countries. Nonetheless, a longer study period will be required to confirm these preliminary conclusions.

  3. Regional forecast model for the Olea pollen season in Extremadura (SW Spain)

    Science.gov (United States)

    Fernández-Rodríguez, Santiago; Durán-Barroso, Pablo; Silva-Palacios, Inmaculada; Tormo-Molina, Rafael; Maya-Manzano, José María; Gonzalo-Garijo, Ángela

    2016-10-01

    The olive tree ( Olea europaea) is a predominantly Mediterranean anemophilous species. The pollen allergens from this tree are an important cause of allergic problems. Olea pollen may be relevant in relation to climate change, due to the fact that its flowering phenology is related to meteorological parameters. This study aims to investigate airborne Olea pollen data from a city on the SW Iberian Peninsula, to analyse the trends in these data and their relationships with meteorological parameters using time series analysis. Aerobiological sampling was conducted from 1994 to 2013 in Badajoz (SW Spain) using a 7-day Hirst-type volumetric sampler. The main Olea pollen season lasted an average of 34 days, from May 4th to June 7th. The model proposed to forecast airborne pollen concentrations, described by one equation. This expression is composed of two terms: the first term represents the resilience of the pollen concentration trend in the air according to the average concentration of the previous 10 days; the second term was obtained from considering the actual pollen concentration value, which is calculated based on the most representative meteorological variables multiplied by a fitting coefficient. Due to the allergenic characteristics of this pollen type, it should be necessary to forecast its short-term prevalence using a long record of data in a city with a Mediterranean climate. The model obtained provides a suitable level of confidence to forecast Olea airborne pollen concentration.

  4. Transport pathway and source area for Artemisia pollen in Beijing, China

    Science.gov (United States)

    Qin, Xiaoxin; Li, Yiyin; Sun, Xu; Meng, Ling; Wang, Xiaoke

    2017-12-01

    Artemisia pollen is an important allergen responsible for allergic rhinitis in Beijing, China. To explore the transport pathways and source areas of Artemisia pollen, we used Burkard 7-day traps to monitor daily pollen concentrations in 2016 in an urban and suburban locality. Backward trajectories of 24- and 96-h and their cluster analysis were performed to identify transport pathways of Artemisia pollen using the HYSPLIT model on 0.5° × 0.5° GADS meteorological data. The potential source contribution function (PSCF) and concentration weighted trajectory (CWT) were calculated to further identify the major potential source areas at local, regional, and long-range scales. Our results showed significant differences in Artemisia pollen concentration between urban and suburban areas, attributed to differences in plant distribution and altitude of the sampling locality. Such differences arisen from both pollen emission and air mass movements, hence pollen dispersal. At local or regional scales, source area of northwestern parts of Beijing City, Hebei Province and northern and northwestern parts of Inner Mongolia influenced the major transport pathways of Artemisia pollen. Transport pathway at a long-range scale and its corresponding source area extended to northwestern parts of Mongolia. The regional-scale transport affected by wind and altitude is more profound for Artemisia pollen at the suburban than at the urban station.

  5. Pollen counts in the television media.

    Science.gov (United States)

    Giberson, J E; Murray, L W; Frenz, D A

    1997-01-01

    Allergists routinely supply pollen counts to television stations to assist allergy sufferers and to publicize their medical practices. This investigation examined how widely pollen counts are used in television news programming. The authors telephoned the news director or a meteorologist at 121 broadcast television stations in the nation's 30 largest Designated Market Areas (DMAs). They were asked if pollen counts were included or would be included in news programming during the 1995 pollen season. At least one television station in 28 DMAs included pollen counts in news programming. All five stations in the Washington, DC, DMA aired pollen counts; however, no stations in the Pittsburgh or Milwaukee DMAs carried pollen information. Approximately 49 million television households have access to pollen counts through a broadcast television station. Because these data appear important to television stations and to the public, the authors outline four measures to assure the reliability and meaningfulness of pollen information.

  6. Pollen Forecast and Dispersion Modelling

    Science.gov (United States)

    Costantini, Monica; Di Giuseppe, Fabio; Medaglia, Carlo Maria; Travaglini, Alessandro; Tocci, Raffaella; Brighetti, M. Antonia; Petitta, Marcello

    2014-05-01

    The aim of this study is monitoring, mapping and forecast of pollen distribution for the city of Rome using in-situ measurements of 10 species of common allergenic pollens and measurements of PM10. The production of daily concentration maps, associated to a mobile phone app, are innovative compared to existing dedicated services to people who suffer from respiratory allergies. The dispersal pollen is one of the most well-known causes of allergic disease that is manifested by disorders of the respiratory functions. Allergies are the third leading cause of chronic disease and it is estimated that tens millions of people in Italy suffer from it. Recent works reveal that during the last few years there was a progressive increase of affected subjects, especially in urban areas. This situation may depend: on the ability to transport of pollutants, on the ability to react between pollutants and pollen and from a combination of other irritants, existing in densely populated and polluted urban areas. The methodology used to produce maps is based on in-situ measurements time series relative to 2012, obtained from networks of air quality and pollen stations in the metropolitan area of Rome. The monitoring station aerobiological of University of Rome "Tor Vergata" is located at the Department of Biology. The instrument used to pollen monitoring is a volumetric sampler type Hirst (Hirst 1952), Model 2000 VPPS Lanzoni; the data acquisition is carried out as reported in Standard UNI 11008:2004 - "Qualità dell'aria - Metodo di campionamento e conteggio dei granuli pollinici e delle spore fungine aerodisperse" - the protocol that describes the procedure for measuring of the concentration of pollen grains and fungal spores dispersed into the atmosphere, and reported in the "Manuale di gestione e qualità della R.I.M.A" (Travaglini et. al. 2009). All 10 allergenic pollen are monitored since 1996. At Tor Vergata university is also operating a meteorological station (SP2000, CAE

  7. Rapid Surface Sampling and Archival Record (RSSAR) System. Topical report, October 1, 1993--December 31, 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    This report describes the results of Phase 1 efforts to develop a Rapid Surface Sampling and Archival Record (RSSAR) System for the detection of semivolatile organic contaminants on concrete, transite, and metal surfaces. The characterization of equipment and building surfaces for the presence of contaminants as part of building decontamination and decommissioning activities is an immensely large tacks of concern to both government and industry. Contaminated and clean materials must be clearly identified and segregated so that the clean materials can be recycled or reused, if possible, or disposed of more cheaply as nonhazardous waste. Characterization of building and equipment surfaces will be needed during initial investigations, during cleanup operations, and during the final confirmatory process, increasing the total number of samples well beyond that needed for initial characterization. This multiplicity of information places a premium on the ability to handle and track data as efficiently as possible. Aware of the shortcomings of traditional surface characterization technology, GE, with DOE support has undertaken a 12-month effort to complete Phase 1 of a proposed four-phase program to develop the RSSAR system. The objectives of this work are to provide instrumentation to cost-effectively sample concrete and steel surfaces, provide a quick-look indication for the presence or absence of contaminants, and collect samples for later, more detailed analysis in a readily accessible and addressable form. The Rapid Surface Sampling and Archival Record (RSSAR) System will be a modular instrument made up of several components: (1) sampling heads for concrete surfaces, steel surfaces, and bulk samples; (2) quick-look detectors for photoionization and ultraviolet; (3) multisample trapping module to trap and store vaporized contaminants in a manner suitable for subsequent detailed lab-based analyses.

  8. Rapid Surface Sampling and Archival Record (RSSAR) System. Topical report, October 1, 1993--December 31, 1994

    International Nuclear Information System (INIS)

    1997-01-01

    This report describes the results of Phase 1 efforts to develop a Rapid Surface Sampling and Archival Record (RSSAR) System for the detection of semivolatile organic contaminants on concrete, transite, and metal surfaces. The characterization of equipment and building surfaces for the presence of contaminants as part of building decontamination and decommissioning activities is an immensely large tacks of concern to both government and industry. Contaminated and clean materials must be clearly identified and segregated so that the clean materials can be recycled or reused, if possible, or disposed of more cheaply as nonhazardous waste. Characterization of building and equipment surfaces will be needed during initial investigations, during cleanup operations, and during the final confirmatory process, increasing the total number of samples well beyond that needed for initial characterization. This multiplicity of information places a premium on the ability to handle and track data as efficiently as possible. Aware of the shortcomings of traditional surface characterization technology, GE, with DOE support has undertaken a 12-month effort to complete Phase 1 of a proposed four-phase program to develop the RSSAR system. The objectives of this work are to provide instrumentation to cost-effectively sample concrete and steel surfaces, provide a quick-look indication for the presence or absence of contaminants, and collect samples for later, more detailed analysis in a readily accessible and addressable form. The Rapid Surface Sampling and Archival Record (RSSAR) System will be a modular instrument made up of several components: (1) sampling heads for concrete surfaces, steel surfaces, and bulk samples; (2) quick-look detectors for photoionization and ultraviolet; (3) multisample trapping module to trap and store vaporized contaminants in a manner suitable for subsequent detailed lab-based analyses

  9. Europa's surface radiation environment and considerations for in-situ sampling and biosignature detection

    Science.gov (United States)

    Nordheim, T.; Paranicas, C.; Hand, K. P.

    2017-12-01

    Jupiter's moon Europa is embedded deep within the Jovian magnetosphere and is thus exposed to bombardment by charged particles, from thermal plasma to more energetic particles at radiation belt energies. In particular, energetic charged particles are capable of affecting the uppermost layer of surface material on Europa, in some cases down to depths of several meters (Johnson et al., 2004; Paranicas et al., 2009, 2002). Examples of radiation-induced surface alteration include sputtering, radiolysis and grain sintering; processes that are capable of significantly altering the physical properties of surface material. Radiolysis of surface ices containing sulfur-bearing contaminants from Io has been invoked as a possible explanation for hydrated sulfuric acid detected on Europa's surface (Carlson et al., 2002, 1999) and radiolytic production of oxidants represents a potential source of energy for life that could reside within Europa's sub-surface ocean (Chyba, 2000; Hand et al., 2007; Johnson et al., 2003; Vance et al., 2016). Accurate knowledge of Europa's surface radiation environment is essential to the interpretation of space and Earth-based observations of Europa's surface and exosphere. Furthermore, future landed missions may seek to sample endogenic material emplaced on Europa's surface to investigate its chemical composition and to search for biosignatures contained within. Such material would likely be sampled from the shallow sub-surface, and thus, it becomes crucial to know to which degree this material is expected to have been radiation processed.Here we will present modeling results of energetic electron and proton bombardment of Europa's surface, including interactions between these particles and surface material. In addition, we will present predictions for biosignature destruction at different geographical locations and burial depths and discuss the implications of these results for surface sampling by future missions to Europa's surface.

  10. The weak effects of climatic change on Plantago pollen concentration: 17 years of monitoring in Northwestern Spain

    Science.gov (United States)

    González-Parrado, Zulima; Valencia-Barrera, Rosa Ma.; Vega-Maray, Ana Ma.; Fuertes-Rodríguez, Carmen Reyes; Fernández-González, Delia

    2014-09-01

    Plantago L. species are very common in nitrified areas such as roadsides and their pollen is a major cause of pollinosis in temperate regions. In this study, we sampled airborne pollen grains in the city of León (NW, Spain) from January 1995 to December 2011, by using a Burkard® 7-day-recording trap. The percentage of Plantago pollen compared to the total pollen count ranged from 11 % (1997) to 3 % (2006) in the period under study. Peak pollen concentrations were recorded in May and June. Our 17-year analysis failed to disclose significant changes in the seasonal trend of plantain pollen concentration. In addition, there were no important changes in the start dates of pollen release and the meteorological parameters analyzed did not show significant variations in their usual trends. We analyzed the influence of several meteorological parameters on Plantago pollen concentration to explain the differences in pollen concentration trends during the study. Our results show that temperature, sun hours, evaporation, and relative humidity are the meteorological parameters best correlated to the behavior of Plantago pollen grains. In general, the years with low pollen concentrations correspond to the years with less precipitation or higher temperatures. We calculated the approximate Plantago flowering dates using the cumulative sum of daily maximum temperatures and compared them with the real bloom dates. The differences obtained were 4 days in 2009, 3 days in 2010, and 1 day in 2011 considering the complete period of pollination.

  11. Preparation of well-defined samples of AlPdMn quasicrystals for surface studies

    Science.gov (United States)

    Jenks, C. J.; Delaney, D. W.; Bloomer, T. E.; Chang, S.-L.; Lograsso, T. A.; Shen, Z.; Zhang, C.-M.; Thiel, P. A.

    1996-12-01

    We have developed a method for preparing single-grain, quasicrystalline AlPdMn samples for surface studies in ultrahigh vacuum. The main issues of concern are phase purity, the quality of the surface structure, and the surface, and the surface composition. Phase purity is enhanced by annealing the sample in ultra-pure Ar in a sealed quartz ampoule for several days before polishing. Polishing with colloidal silica allows secondary phases to be detected readily with an optical microscope. As a final precaution, phase purity can be checked sensitively with scanning Auger microscopy. After this stage, the sample can be cleaned in ultrahigh vacuum with ion bombardment. Annealing is required after bombardment to restore surface structure and to obtain a low-energy electron diffraction (LEED) pattern of an oriented sample. However, both ion bombardment and heating to temperatures above 870 K in vacuum, produce Pd-rich surfaces. As a final step, for the five-fold surface, we recommend heating briefly to 1050-1100 K and then annealing at 870 K for several hours. This produces both an excellent LEED pattern, and a surface composition close to that of the bulk.

  12. Atrazine, triketone herbicides, and their degradation products in sediment, soil and surface water samples in Poland.

    Science.gov (United States)

    Barchanska, Hanna; Sajdak, Marcin; Szczypka, Kornelia; Swientek, Angelika; Tworek, Martyna; Kurek, Magdalena

    2017-01-01

    The aim of this study was to monitor the sediment, soil and surface water contamination with selected popular triketone herbicides (mesotrione (MES) and sulcotrione(SUL)), atrazine (ATR) classified as a possible carcinogen and endocrine disrupting chemical, as well as their degradation products, in Silesia (Poland). Seventeen sediment samples, 24 soil samples, and 64 surface water samples collected in 2014 were studied. After solid-liquid extraction (SLE) and solid phase extraction (SPE), analytes were determined by high-performance liquid chromatography (HPLC) with diode array detection (DAD). Ten years after the withdrawal from the use, ATR was not detected in any of the collected samples; however, its degradation products are still present in 41 % of sediment, 71 % of soil, and 8 % of surface water samples. SUL was determined in 85 % of soil samples; its degradation product (2-chloro-4-(methylosulfonyl) benzoic acid (CMBA)) was present in 43 % of soil samples. In 17 % of sediment samples, CMBA was detected. Triketones were detected occasionally in surface water samples. The chemometric analysis (clustering analysis (CA), single-factor analysis of variance (ANOVA), N-Way ANOVA) was applied to find relations between selected soil and sediment parameters and herbicides concentration. In neither of the studied cases a statistically significant relationship between the concentrations of examined herbicides, their degradation products and soil parameters (organic carbon (OC), pH) was observed.

  13. The pollen spectrum of honeys of Lipnik Gmina (Świętokrzyskie Province

    Directory of Open Access Journals (Sweden)

    Ernest Stawiarz

    2012-12-01

    Full Text Available During 2003 and 2004 apicultural seasons, 25 samples of honeys were collected in 10 localities of Lipnik (świętokrzyskie Province countryside. Pollen analysis was made according to the requirements of the International Commission for Bee Botany IUSB (Louveaux et al., 1978. There were identified pollen of 85 taxa in the examined samples of honeys: pollen of 62 nectariferous and 23 non-nectariferous plants. Participation of non-nectariferous plant pollen in particular samples ranged between 0.3 and 28.4%. Among the nectariferous plant pollen, the highest pollen frequency (above 50% have been stated for Brassicaceae (with Brassica napus, Prunus type, Trifolium repens, Anthriscus type, Salix, Aesculus, Rubus type, Tilia, Taraxacum type, Galeopsis and Heracleum type, among non-nectariferous plans: Poaceae, Papaver and Fragaria. On average, a particular honey contained 16 pollen types of nectariferous plants (range 7-26 and 7 of non-nectariferous (range 1-13. Among the examined samples, there were 11 specific honeys: 7 compatible with the Polish Standard - 4 samples of Brassica napus honeys, 2 Robinia pseudacacia, 1 Tilia, and 4 samples of honeys out of his this standard. There were 3 Galeopsis honeys and 1 honey from Phacelia. The remaining 14 samples were classified as multifloral honeys compatible with the Polish Standard. The woods and scrubs as well as meadows and pastures supplied main sources of honeybee flow in the examined area.

  14. Rank-based characterization of pollen assemblages collected by honey bees using a multi-locus metabarcoding approach.

    Science.gov (United States)

    Richardson, Rodney T; Lin, Chia-Hua; Quijia, Juan O; Riusech, Natalia S; Goodell, Karen; Johnson, Reed M

    2015-11-01

    Difficulties inherent in microscopic pollen identification have resulted in limited implementation for large-scale studies. Metabarcoding, a relatively novel approach, could make pollen analysis less onerous; however, improved understanding of the quantitative capacity of various plant metabarcode regions and primer sets is needed to ensure that such applications are accurate and precise. We applied metabarcoding, targeting the ITS2, matK, and rbcL loci, to characterize six samples of pollen collected by honey bees, Apis mellifera. Additionally, samples were analyzed by light microscopy. We found significant rank-based associations between the relative abundance of pollen types within our samples as inferred by the two methods. Our findings suggest metabarcoding data from plastid loci, as opposed to the ribosomal locus, are more reliable for quantitative characterization of pollen assemblages. Furthermore, multilocus metabarcoding of pollen may be more reliable than single-locus analyses, underscoring the need for discovering novel barcodes and barcode combinations optimized for molecular palynology.

  15. Knockin' on pollen's door: live cell imaging of early polarization events in germinating Arabidopsis pollen

    Science.gov (United States)

    Vogler, Frank; Konrad, Sebastian S. A.; Sprunck, Stefanie

    2015-01-01

    Pollen tubes are an excellent system for studying the cellular dynamics and complex signaling pathways that coordinate polarized tip growth. Although several signaling mechanisms acting in the tip-growing pollen tube have been described, our knowledge on the subcellular and molecular events during pollen germination and growth site selection at the pollen plasma membrane is rather scarce. To simultaneously track germinating pollen from up to 12 genetically different plants we developed an inexpensive and easy mounting technique, suitable for every standard microscope setup. We performed high magnification live-cell imaging during Arabidopsis pollen activation, germination, and the establishment of pollen tube tip growth by using fluorescent marker lines labeling either the pollen cytoplasm, vesicles, the actin cytoskeleton or the sperm cell nuclei and membranes. Our studies revealed distinctive vesicle and F-actin polarization during pollen activation and characteristic growth kinetics during pollen germination and pollen tube formation. Initially, the germinating Arabidopsis pollen tube grows slowly and forms a uniform roundish bulge, followed by a transition phase with vesicles heavily accumulating at the growth site before switching to rapid tip growth. Furthermore, we found the two sperm cells to be transported into the pollen tube after the phase of rapid tip growth has been initiated. The method presented here is suitable to quantitatively study subcellular events during Arabidopsis pollen germination and growth, and for the detailed analysis of pollen mutants with respect to pollen polarization, bulging, or growth site selection at the pollen plasma membrane. PMID:25954283

  16. Modern non-pollen palynomorphs from East African Lake sediments

    NARCIS (Netherlands)

    Gelorini, V.; Verbeken, A.; van Geel, B.; Cocquyt, C.; Verschuren, D.

    2011-01-01

    This paper presents an illustrated guide to the identification of non-pollen palynomorphs (NPPs) preserved in lake-sediment archives from equatorial East Africa. Modern NPPs were recovered from recently deposited surface sediment in 20 small crater lakes in western Uganda, located along

  17. Pollen of Syzygium (Myrtaceae) from SE Asia, especially Thailand

    NARCIS (Netherlands)

    Parnell, J.

    2003-01-01

    Pollen of 57 species of Syzygium from SE Asia were surveyed by SEM. The grains are all ± triangular in polar view, uniformly small (mean diameter 10.4 μm) with few surface sculpturing features. All species examined exhibit a distinct apocolpium and, usually, apocolpial field. The presence of an

  18. Path integral molecular dynamics with surface hopping for thermal equilibrium sampling of nonadiabatic systems.

    Science.gov (United States)

    Lu, Jianfeng; Zhou, Zhennan

    2017-04-21

    In this work, a novel ring polymer representation for a multi-level quantum system is proposed for thermal average calculations. The proposed representation keeps the discreteness of the electronic states: besides position and momentum, each bead in the ring polymer is also characterized by a surface index indicating the electronic energy surface. A path integral molecular dynamics with surface hopping (PIMD-SH) dynamics is also developed to sample the equilibrium distribution of the ring polymer configurational space. The PIMD-SH sampling method is validated theoretically and by numerical examples.

  19. Optimization of sampling for the determination of the mean Radium-226 concentration in surface soil

    International Nuclear Information System (INIS)

    Williams, L.R.; Leggett, R.W.; Espegren, M.L.; Little, C.A.

    1987-08-01

    This report describes a field experiment that identifies an optimal method for determination of compliance with the US Environmental Protection Agency's Ra-226 guidelines for soil. The primary goals were to establish practical levels of accuracy and precision in estimating the mean Ra-226 concentration of surface soil in a small contaminated region; to obtain empirical information on composite vs. individual soil sampling and on random vs. uniformly spaced sampling; and to examine the practicality of using gamma measurements in predicting the average surface radium concentration and in estimating the number of soil samples required to obtain a given level of accuracy and precision. Numerous soil samples were collected on each six sites known to be contaminated with uranium mill tailings. Three types of samples were collected on each site: 10-composite samples, 20-composite samples, and individual or post hole samples; 10-composite sampling is the method of choice because it yields a given level of accuracy and precision for the least cost. Gamma measurements can be used to reduce surface soil sampling on some sites. 2 refs., 5 figs., 7 tabs

  20. Coconut (Cocos nucifera l.) pollen cryopreservation.

    Science.gov (United States)

    Karun, A; Sjini, K K; Niral, V; Amarnth, C H; Remya, P; Rajesh, M K; Samsudeen, K; Jerard, B A; Engelmann, F

    2014-01-01

    Coconut genetic resources are threatened by pests and pathogens, natural hazards and human activities. Cryopreservation is the only method allowing the safe and cost-effective long-term conservation of recalcitrant seed species such as coconut. The objective of this work was to test the effect of cryopreservation and of cryostorage duration on coconut pollen germination and fertility. Pollen of two coconut varieties (West Coast Tall WWCTW and Chowghat Orange Dwarf CODC) was collected in March-May over three successive years, desiccated to 7.5 % moisture content (FW) and cryopreserved by direct immersion in liquid nitrogen. Germination and pollen tube length (PTL) of desiccated and cryopreserved pollen were not significantly different for both WCT and COD over the three harvest months of the three consecutive years of study. Pollen germination ranged from 24 to 32 % in desiccated pollen whereas it was between 26 and 29 % in cryopreserved COD pollen. In the case of WCT, germination ranged from 30 to 31 % in desiccated pollen, while it was between 28 and 32 % in cryopreserved pollen. PTL of cryopreserved pollen ranged between 224-390 nm and 226-396 mm for COD and WCT, respectively. Germination of COD pollen varied between 29.0 and 44.1 % after 4 years and 1.0/1.5 years cryostorage, respectively. Germination of WCT pollen did not change significantly between 0 and 6 years cryostorage, being comprised between 32 (24 h) and 40 % (1.5 years). Germination and vigour of cryopreserved pollen were generally higher compared to that of pollen dried in oven and non-cryopreserved. Normal seed set was observed in COD and WCT palms using pollen cryostored for 6 months and 4 years. Cryopreserved pollen of five Tall and five Dwarf accessions displayed 24-31 % and 25-49 % germination, respectively. These results show that it is now possible to establish pollen cryobanks to contribute to coconut germplasm long-term conservation.

  1. Operable Unit 3-13, Group 3, Other Surface Soils (Phase II) Field Sampling Plan

    Energy Technology Data Exchange (ETDEWEB)

    G. L. Schwendiman

    2006-07-27

    This Field Sampling Plan describes the Operable Unit 3-13, Group 3, Other Surface Soils, Phase II remediation field sampling activities to be performed at the Idaho Nuclear Technology and Engineering Center located within the Idaho National Laboratory Site. Sampling activities described in this plan support characterization sampling of new sites, real-time soil spectroscopy during excavation, and confirmation sampling that verifies that the remedial action objectives and remediation goals presented in the Final Record of Decision for Idaho Nuclear Technology and Engineering Center, Operable Unit 3-13 have been met.

  2. May 2013 Groundwater and Surface Water Sampling at the Rio Blanco, Colorado, Site (Data Validation Package)

    Energy Technology Data Exchange (ETDEWEB)

    Hutton, Rick [S.M. Stoller Corporation, Broomfield, CO (United States)

    2013-10-01

    Annual sampling was conducted at the Rio Blanco, Colorado, site for the Long-Term Hydrologic Monitoring Program May 14-16, 2013, to monitor groundwater and surface water for potential radionuclide contamination. Sampling and analyses were conducted as specified in Sampling and Analysis Plan for the U.S. Department of Energy Office of Legacy Management Sites (LMS/PRO/S04351, continually updated). A duplicate sample was collected from location CER #1 Black Sulphur. Samples were analyzed for gamma-emitting radionuclides by high-resolution gamma spectrometry and for tritium using the conventional and enrichment methods.

  3. Pollen morphology and viability in Bromeliaceae

    Directory of Open Access Journals (Sweden)

    EVERTON H. SOUZA

    2017-12-01

    Full Text Available ABSTRACT Pollen morphology characterization is important in taxonomy, conservation and plant breeding, and pollen viability studies can support breeding programs. This study investigated pollen morphology and male fertility in 18 species of Bromeliaceae with ornamental potential. For morphological characterization, pollen grains were acetolyzed and characterization of exine was done using scanning and transmission electron microscopy. Pollen viability was investigated by in vitro germination and histochemical tests. Species belonging to Aechmea and Ananas genera presented medium size pollen, except for Ae. fasciata, with large pollen. Al. nahoumii, P. sagenarius and the Vriesea species analyzed showed large pollen, except for V. carinata, with very large pollen. Pollen of Aechmea, Ananas and P. sagenarius presented bilateral symmetry, diporate, exine varying from tectate to semitectate. Al. nahoumii and Vriesea species presented pollen with bilateral symmetry, monocolpate; exine was semitectate, reticulate and heterobrochate. Germination percentage and tube growth were greater in SM and BKM media. Histochemical tests showed pollen viability above 70% for all species, except for Ananas sp. (40%. Pollen morphology is important for the identification of species, especially in this family, which contains a large number of species. High rates of viability favor fertilization and seed production, essential for efficient hybrid production and conservation.

  4. Pollen morphology and viability in Bromeliaceae.

    Science.gov (United States)

    Souza, Everton H; Souza, Fernanda V D; Rossi, Mônica L; Packer, Renan M; Cruz-Barros, Maria Amelia V; Martinelli, Adriana P

    2017-01-01

    Pollen morphology characterization is important in taxonomy, conservation and plant breeding, and pollen viability studies can support breeding programs. This study investigated pollen morphology and male fertility in 18 species of Bromeliaceae with ornamental potential. For morphological characterization, pollen grains were acetolyzed and characterization of exine was done using scanning and transmission electron microscopy. Pollen viability was investigated by in vitro germination and histochemical tests. Species belonging to Aechmea and Ananas genera presented medium size pollen, except for Ae. fasciata, with large pollen. Al. nahoumii, P. sagenarius and the Vriesea species analyzed showed large pollen, except for V. carinata, with very large pollen. Pollen of Aechmea, Ananas and P. sagenarius presented bilateral symmetry, diporate, exine varying from tectate to semitectate. Al. nahoumii and Vriesea species presented pollen with bilateral symmetry, monocolpate; exine was semitectate, reticulate and heterobrochate. Germination percentage and tube growth were greater in SM and BKM media. Histochemical tests showed pollen viability above 70% for all species, except for Ananas sp. (40%). Pollen morphology is important for the identification of species, especially in this family, which contains a large number of species. High rates of viability favor fertilization and seed production, essential for efficient hybrid production and conservation.

  5. Environmental survivability and surface sampling efficiencies for Pseudomonas aeruginosa on various fomites.

    Science.gov (United States)

    Jones, Tia M; Lutz, Eric A

    2014-05-01

    The study described in this article evaluated surface survivability of culturable Pseudomonas aeruginosa by time and type (glass, stainless steel, and laminate) using two sampling techniques: contact plates and surface swabs. Recovery of P. aeruginosa decreased logarithmically over time and varied by surface type. P. aeruginosa survival averaged 3.75, 5.75, and 6.75 hours on laminate, glass, and stainless steel, respectively. Culturable P. aeruginosa loss on stainless steel and glass were not different (p > .05); however, laminate had significantly greater loss at each time point than either glass or stainless (p < .05). A comparison of surface swab and contact plate collection efficiencies found no significant difference for laminate surfaces. Swabs, however, had a higher collection efficiency than contact plates (p < .05). For the first time, the authors report P. aeruginosa mean survival time of 3.75-6.75 hours on clinically relevant surfaces, with P. aeruginosa on stainless steel surviving the longest. Their data also indicate that culturable surface sampling appears to most accurately represent actual P. aeruginosa surface loading when swab sampling is used.

  6. Modern pollen studies in the territory of Sagalassos (Southwest Turkey) and their use in the interpretation of a Late Holocene pollen diagram.

    Science.gov (United States)

    Vermoere, M; Vanhecke, L; Waelkens, M; Smets, E

    2001-03-01

    Modern pollen precipitation studies were carried out on a regional scale in the territory of the classical city of Sagalassos (Southwest Turkey). 57 moss cushions and 7 soil samples from different vegetation types were analysed palynologically. The resulting pollen spectra were grouped into 14 vegetation groups, which were examined using discriminant analysis and principal components analysis. These numerical procedures are applied to display the structure in the data set in a comprehensive way. Some of the modern spectra groups seem to be well-defined, whereas others are difficult to distinguish from each other. After the relationships between the modern pollen spectra had been analysed, the fossil data from a core from the marsh of Gravgaz were added to the data set so that any similarities between fossil and modern spectra could be seen. A joint principal components analysis of the modern and fossil pollen spectra revealed that the pollen spectra from the earliest (ca. 2600-2500 BP; Cal. 830-590 BC till 790-520 BC) and the latest (starting at ca. 1300 BP; Cal. 660-780 AD) pollen assemblage zones have modern counterparts. On the other hand, the pollen spectra from the pollen assemblage zone dominated by Artemisia (ca. 2500-2300 BP; Cal. 790-520 BC till 410-210 BC) and from the pollen assemblage zone that indicated the practice of arboriculture (ca. 2300-1300 BP; Cal. 410-210 BC till 660-780 AD) have no close modern analogues, although individual tabulated pollen percentages revealed some similarities with some modern spectra groups.

  7. Enhanced airborne radioactivity during a pine pollen release episode

    Energy Technology Data Exchange (ETDEWEB)

    Tschiersch, J.; Frank, G.; Roth, P.; Wagenpfeil, F. [Gesellschaft fuer Strahlen- und Umweltforschung mbH Muenchen, Neuherberg (Germany). Inst. fuer Strahlenschutz; Watterson, J. [AEA Technology, Culham (United Kingdom)

    1999-07-01

    A single episode of pine pollen release in the highly contaminated area of Novozybkov, Russian Federation, which led to enhanced atmospheric concentrations of {sup 137}Cs is discussed. The pollen grains were sampled by a rotating arm impactor and analysed by gamma-spectrometry for {sup 137}Cs activity and by image analysis for their size. In the vicinity of a forest, a maximum concentration of 4.5{+-}0.4 mBq m{sup -3} was measured, and a mean activity per pollen grain of 260{+-}80 nBq was determined. The emission rate of the Novozybkov mixed pine forest was estimated to be approximately 400 Bq m{sup -2} per year. Because of the large size of pine pollen grains (about 50 {mu}m) and the short emission period of 5-8 days per year, the estimated potential annual inhalation doses are very low. Biological emissions including pollen release may be a source of increased airborne radionuclide concentrations at larger distance from the source areas as well. (orig.)

  8. [Description and value of the Microvision system for pollen analysis].

    Science.gov (United States)

    Thibaudon, M; Lachasse, C

    2004-09-01

    Currently, two techniques of analysis are classically used by the aerobiological networks: the technique of the 12 vertical lines allow to follow the evolution by bi-hourly periods of pollination, but the segmentation of the sample doesn't allow to visualise pollen clouds of short duration; the technique of 2 or 3 horizontal lines allow to follow the daily evolution, but only the daily totals are recorded. The MICROVISION system adapted by the RNSA to the pollen analysis allow to keep the horizontal method, which is faster and continue, and to record automatically in the database the hourly or bi-hourly data. So each pollen is recorded by its coordinates with a precision of 1 micron (1.8 seconds). First, we realised a cartography of the impaction of the pollen grains on the strip, in order to locate the more representative horizontal lines. Secondly, the coupling of the microscope with the Microvision system and the software of data acquiring elaborated by the RNSA allow to propose a more reliable and faster procedure for pollen analysis.

  9. National Allergy Bureau Pollen and Mold Report

    Science.gov (United States)

    ... Search AAAAI National Allergy Bureau Pollen and Mold Report Date: May 01, 2018 Location: San Antonio (2), ... 30/2018 ( click here to view ). Our Allergen Report Email Service can automatically email you daily pollen ...

  10. Evaluation of the botanical origin of commercial dry bee pollen load batches using pollen analysis: a proposal for technical standardization

    Directory of Open Access Journals (Sweden)

    Ortrud M. Barth

    2010-12-01

    Full Text Available High quality of bee pollen for commercial purpose is required. In order to attend the consumer with the best identification of the botanical and floral origin of the product, 25 bee pollen batches were investigated using two techniques of pollen grain preparation. The first started to identify pollen loads of different colors in two grams of each well mixed batch, and the second to identify pollen grains in a pool made of all the pollen loads comprised in two grams. The best result was obtained by this last technique, when a pollen grain suspension was dropped on a microscope slide and circa 500 pollen grains were counted per sample. This analysis resulted in the recognition of monofloral and bifloral pollen batches, while the use of the first technique resulted in all samples receiving a heterofloral diagnosis.É exigida alta qualidade para a comercialização de pólen apícola. A fim de atender o consumidor com a melhor identificação da origem botânica e floral do produto, 25 partidas de pólen apícola feram investigadas usande duas diferentes técnicas na preparação dos grãos de pólen. A primeira partiu da identificação das cargas polínicas contidas em dois gramas de cada partida bem misturada segundo suas cores. A segunda visava identificar os grãos de pólen de um agrupamento ("pool" de todas as cargas polínicas contidas em dois gramas de cada amostra. O melhor resultado foi obtido pela última técnica, quando uma suspensão de grãos de pólen era gotejada sobre uma lâmina de microscopia e cerca de 500 grãos de pólen eram centades por amostra. Esta análise resultou no reconhecimento de partidas monoflorais e biflorais de pólen apícola, enquanto que usando a primeira técnica, todas as amostras receberam a diagnose heterefloral.

  11. New colporate pollen taxa from Neyveli lignite, South India

    Energy Technology Data Exchange (ETDEWEB)

    Singh, A.; Misra, B.K. (Birbal Sahni Institute of Palaeobotany, Lucknow (India))

    1991-02-19

    Four new pollen genera: {ital Bacuspinulopollenites} {ital Cuddaloripollis}, {ital Scrobiculatricolporites}, {ital Tamilipollenites} and seven new species from the subsurface lignite samples of the Mine III area of the Neyveli Lignite Field are described. {ital Tricolporopilites} (Kar and Saxena) Kar 1985 is amended and three new species {ital T. uniformis}, {ital T. differentialis} and {ital T. tectatus} are assigned to it. These colporate angiospermous pollen taxa provide additional information on the palynofloral composition of the main lignite seam encountered in three boreholes. 19 refs., 5 figs.

  12. Differential efficiencies of dip-net sampling versus sampling surface-floating pupal exuviae in a biodiversity survey of Chironomidae

    Directory of Open Access Journals (Sweden)

    Leonard Charles Ferrington Jr

    2014-12-01

    Full Text Available Relative efficiencies of standard dip-net sampling (SDN versus collections of surface-floating pupal exuviae (SFPE were determined for detecting Chironomidae at catchment and site scales and at subfamily/tribe-, genus- and species-levels based on simultaneous, equal-effort sampling on a monthly basis for one year during a biodiversity assessment of Bear Run Nature Reserve. Results showed SFPE was more efficient than SDN at catchment scales for detecting both genera and species. At site scales, SDN sampling was more efficient for assessment of a first-order site. No consistent pattern, except for better efficiency of SFPE to detect Orthocladiinae genera, was observed at genus-level for two second-order sites. However, SFPE was consistently more efficient at detecting species of Orthocladiinae, Chironomini and Tanytarsini at the second order sites. SFPE was more efficient at detecting both genera and species at two third-order sites. The differential efficiencies of the two methods are concluded to be related to stream order and size, substrate size, flow and water velocity, depth and habitat heterogeneity, and differential ability to discriminate species among pupal exuviae specimens versus larval specimens. Although both approaches are considered necessary for comprehensive biodiversity assessments of Chironomidae, our results suggest that there is an optimal, but different, allocation of sampling effort for detecting Chironomidae across stream orders and at differing spatial and taxonomic scales.Article submitted 13. August 2014, accepted 31. October 2014, published 22. December 2014.

  13. Cracks and nanodroplets produced on tungsten surface samples by dense plasma jets

    Science.gov (United States)

    Ticoş, C. M.; Galaţanu, M.; Galaţanu, A.; Luculescu, C.; Scurtu, A.; Udrea, N.; Ticoş, D.; Dumitru, M.

    2018-03-01

    Small samples of 12.5 mm in diameter made from pure tungsten were exposed to a dense plasma jet produced by a coaxial plasma gun operated at 2 kJ. The surface of the samples was analyzed using a scanning electron microscope (SEM) before and after applying consecutive plasma shots. Cracks and craters were produced in the surface due to surface tensions during plasma heating. Nanodroplets and micron size droplets could be observed on the samples surface. An energy-dispersive spectroscopy (EDS) analysis revealed that the composition of these droplets coincided with that of the gun electrode material. Four types of samples were prepared by spark plasma sintering from powders with the average particle size ranging from 70 nanometers up to 80 μm. The plasma power load to the sample surface was estimated to be ≈4.7 MJ m-2 s-1/2 per shot. The electron temperature and density in the plasma jet had peak values 17 eV and 1.6 × 1022 m-3, respectively.

  14. Pollen loads of eucalypt and other pollen types in birds in NW Spain

    Directory of Open Access Journals (Sweden)

    María Calviño-Cancela

    2015-12-01

    Full Text Available Here we present the amount of pollen of eucalypt and pollen of other types for birds captured in two bird ringing stations for 14 months (March 2014 to April 2015 in NW Spain. Common and latin names of all birds species captured, together with the number of captured individuals (N, prevalence of eucalypt pollen (percentage of individuals with eucalypt pollen and of pollen of other types and average pollen loads per individual for eucalypt and other pollen types is presented. See [1] for further information and discussion.

  15. Improved explosive collection and detection with rationally assembled surface sampling materials

    Energy Technology Data Exchange (ETDEWEB)

    Chouyyok, Wilaiwan; Bays, J. Timothy; Gerasimenko, Aleksandr A.; Cinson, Anthony D.; Ewing, Robert G.; Atkinson, David A.; Addleman, R. Shane

    2016-01-01

    Sampling and detection of trace explosives is a key analytical process in modern transportation safety. In this work we have explored some of the fundamental analytical processes for collection and detection of trace level explosive on surfaces with the most widely utilized system, thermal desorption IMS. The performance of the standard muslin swipe material was compared with chemically modified fiberglass cloth. The fiberglass surface was modified to include phenyl functional groups. When compared to standard muslin, the phenyl functionalized fiberglass sampling material showed better analyte release from the sampling material as well as improved response and repeatability from multiple uses of the same swipe. The improved sample release of the functionalized fiberglass swipes resulted in a significant increase in sensitivity. Various physical and chemical properties were systematically explored to determine optimal performance. The results herein have relevance to improving the detection of other explosive compounds and potentially to a wide range of other chemical sampling and field detection challenges.

  16. Visual Assessment of Surface Fuel Loads Does Not Align with Destructively Sampled Surface Fuels

    Directory of Open Access Journals (Sweden)

    Sarah C. McColl-Gausden

    2017-10-01

    Full Text Available Fuel load and structure are fundamental drivers of fire behaviour. Accurate data is required for managers and researchers to better understand our ability to alter fire risk. While there are many ways to quantify fuel, visual assessment methods are generally considered the most efficient. Visual hazard assessments are commonly used by managers, government agencies and consultants to provide a fuel hazard score or rating but not a quantity of fuel. Many systems attempt to convert the hazard score or rating to a fuel load for use in fire behaviour models. Here we investigate whether the conversion table in the widely used Overall Fuel Hazard Guide (OFHG matches destructively sampled fuel loads from 116 sites across five forest types. We specifically examine whether there are quantifiable differences that can be attributed to forest type. We found there is overlap between the two methods for low, moderate and high hazard categories, however for the very high and extreme hazard categories, visual assessment overestimated fuel load in four of the five forest types. Using a commonly applied fire behaviour model, we found that the overestimation of fuel load in very high and extreme hazard categories leads to an overestimation of fire behavior in these hazard categories.

  17. Decreased viability and proliferation of CHANG conjunctival epithelial cells after contact with ultraviolet light-irradiated pollen.

    Science.gov (United States)

    Heidinger, Andrea; Rabensteiner, Dieter Franz; Rabensteiner, Jasmin; Kieslinger, Petra; Horwath-Winter, Jutta; Stabentheiner, Edith; Riedl, Regina; Wedrich, Andreas; Schmut, Otto

    2017-12-27

    Contact with pollen is the major reason for the development of allergic symptoms on the ocular surface leading to a significant increase of allergic diseases worldwide. Environmental changes such as increased ultraviolet (UV) radiation and air pollution are discussed as contributory causes for this increase. We investigated the effect of UV light on the histamine content of pollen and examined if an irradiation of pollen affects the viability and proliferation of conjunctival cells. Alder (Alnus glutinosa) and hazel (Corylus avellana) pollen were irradiated for different time periods with sunlight, UV-A or UV-B light and the histamine content was analysed and compared with non-irradiated pollen. Conjunctival epithelial cells (CHANG cells) were exposed to irradiated and non-irradiated pollen followed by an assessment of cell viability with the colorimetric MTS test and the impedance-based measurement of cell proliferation using the xCELLigence real-time analysis system. UV light irradiation increased the histamine level of alder and hazel pollen in a dose-dependent manner. CHANG cells treated with irradiated pollen induced a statistically significant higher decrease of cell viability than treatment with non-irradiated pollen. Our results indicate that UV light is able to alter pollen thus making them more harmful for conjunctival cells.

  18. PECTATE LYASE-LIKE10 is associated with pollen wall development in Brassica campestris.

    Science.gov (United States)

    Jiang, Jingjing; Yao, Lina; Yu, Youjian; Lv, Meiling; Miao, Ying; Cao, Jiashu

    2014-11-01

    PECTATE LYASE-LIKE10 (PLL10) was previously identified as one of the differentially expressed genes both in microspores during the late pollen developmental stages and in pistils during the fertilization process in Chinese cabbage (Brassica campestris ssp. chinensis). Here, antisense-RNA was used to study the functions of BcPLL10 in Chinese cabbage. Abnormal pollen was identified in the transgenic lines (bcpll10-4, -5, and -6). In fertilization experiments, fewer seeds were harvested when the antisense-RNA lines were used as pollen donor. In vivo and in vitro pollen germination assays less germinated pollen tubes were observed in bcpll10 lines. Scanning electron microscopy observation verified that the tryphine materials were over accumulated around the pollen surface and sticked them together in bcpll10. Moreover, transmission electron microscopy observation revealed that the internal endintine was overdeveloped and predominantly occupied the intine, and disturbed the normal proportional distribution of the two layers in the non-germinal furrow region; and no obvious demarcation existed between them in the germinal furrow region in the bcpll10 pollen. Collectively, this study presented a novel PLL gene that played an important role during the pollen wall development in B. campestris, which may also possess potential importance for male sterility usage in agriculture. © 2014 Institute of Botany, Chinese Academy of Sciences.

  19. Incidence of atmospheric pollen in the Pretoria- Witwatersrand ...

    African Journals Online (AJOL)

    1991-01-19

    Jan 19, 1991 ... the atmospheric sample is discussed. S AIr Med J 1991; 79: 84-87. The elegant aerobiological studies of Ordman1,2 have offered the only published South African data in the field of atmos- pheric pollen and spores to date. It is highly likely that these. Department of Botany, University of the Witwatersrand,.

  20. Bee pollen as a bioindicator of environmental pesticide contamination.

    Science.gov (United States)

    de Oliveira, Renata Cabrera; Queiroz, Sonia Claudia do Nascimento; da Luz, Cynthia Fernandes Pinto; Porto, Rafael Silveira; Rath, Susanne

    2016-11-01

    Honeybees and bee products are potential bioindicators of the presence of contaminants in the environment, enabling monitoring of large areas due to the long distances travelled by bees. This work evaluates the use of bee pollen as a bioindicator of environmental contamination by pesticides. A GC-MS/MS analytical method for multiresidue determination of 26 different pesticides in pollen was developed and validated in accordance with the recommendations of the European Union SANCO guide. Environmental monitoring was conducted using the analysis of 145 pollen samples collected from ten beehives in the experimental apiary of Embrapa in Jaguariúna (São Paulo State, Brazil). Bioallethrin and pendimethalin were identified in four and eighteen samples, respectively, at concentrations below the LOQ of the method (25 ng g(-1)). Passive sampling with polyurethane foam discs was used as a control, and no pesticides were found. The detection of pesticide residues in seven samples (33%) from commercial apiaries in Ribeirão Preto (São Paulo State) confirmed the efficiency of the analytical method and the need for environmental monitoring for the presence of pesticide residues. The results demonstrated the potential of bee pollen as a bioindicator of environmental contamination by pesticides. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. Evidence of pollen tubes in paleozoic pteridosperms.

    Science.gov (United States)

    Rothwell, G W

    1972-02-18

    A saccate pollen grain with a branched pollen tube has been discovered within the pollen chamber of a fossil seed-fern ovule of Middle Pennsylvanian age. This suggests that microgametophytes comparable to those of living gymnosperms were produced by some Paleozoic pteridosperms.

  2. Laboratory Studies on Surface Sampling of Bacillus anthracis Contamination: Summary, Gaps, and Recommendations

    Energy Technology Data Exchange (ETDEWEB)

    Piepel, Gregory F.; Amidan, Brett G.; Hu, Rebecca

    2011-11-28

    This report summarizes previous laboratory studies to characterize the performance of methods for collecting, storing/transporting, processing, and analyzing samples from surfaces contaminated by Bacillus anthracis or related surrogates. The focus is on plate culture and count estimates of surface contamination for swab, wipe, and vacuum samples of porous and nonporous surfaces. Summaries of the previous studies and their results were assessed to identify gaps in information needed as inputs to calculate key parameters critical to risk management in biothreat incidents. One key parameter is the number of samples needed to make characterization or clearance decisions with specified statistical confidence. Other key parameters include the ability to calculate, following contamination incidents, the (1) estimates of Bacillus anthracis contamination, as well as the bias and uncertainties in the estimates, and (2) confidence in characterization and clearance decisions for contaminated or decontaminated buildings. Gaps in knowledge and understanding identified during the summary of the studies are discussed and recommendations are given for future studies.

  3. Accelerated sampling by infinite swapping of path integral molecular dynamics with surface hopping

    Science.gov (United States)

    Lu, Jianfeng; Zhou, Zhennan

    2018-02-01

    To accelerate the thermal equilibrium sampling of multi-level quantum systems, the infinite swapping limit of a recently proposed multi-level ring polymer representation is investigated. In the infinite swapping limit, the ring polymer evolves according to an averaged Hamiltonian with respect to all possible surface index configurations of the ring polymer and thus connects the surface hopping approach to the mean-field path-integral molecular dynamics. A multiscale integrator for the infinite swapping limit is also proposed to enable efficient sampling based on the limiting dynamics. Numerical results demonstrate the huge improvement of sampling efficiency of the infinite swapping compared with the direct simulation of path-integral molecular dynamics with surface hopping.

  4. Paraffin surfaces for culture-based detection of mycobacteria in environmental samples

    Science.gov (United States)

    Jing, Gaoshan; Eluru, Hima B.; Polaczyk, Amy; Kinkle, Brian; Oerther, Daniel B.; Papautsky, Ian

    2005-02-01

    In this paper, we describe the development of paraffin surfaces for culture-based detection of mycobacteria in environmental samples. The surfaces use the well-described paraffinophilic nature of mycobacteria to rapidly and selectively differentiate them from non-target microorganisms. New methods of depositing and patterning paraffin were developed, including using butanol or a heat gun to generate molten paraffin that was subsequently deposited by spin coating and patterned by wet and dry etching techniques. Using these techniques, 18 mm glass wafers with paraffin films of 10 70 µm were fabricated and subsequently etched to form different patterns. Prototype paraffin surfaces were experimentally tested to demonstrate the concept of rapid and selective detection of mycobacteria in environmental samples collected from a municipal sewage treatment plant. Our successful demonstration of the culture-based detection on paraffin substrates presents an alternative approach for tracking microorganisms in complex environmental samples.

  5. Honey pollen: using melissopalynology to understand foraging preferences of bees in tropical South India.

    Science.gov (United States)

    Ponnuchamy, Raja; Bonhomme, Vincent; Prasad, Srinivasan; Das, Lipi; Patel, Prakash; Gaucherel, Cédric; Pragasam, Arunachalam; Anupama, Krishnamurthy

    2014-01-01

    The aim of the study was to use melissopalynology to delineate the foraging preferences of bees in tropical environs. This was done by comparing pollen spectra obtained from the same hives every three months for three years at four sampling locations (in two sites) within a confined landscape mosaic. If melissopalynology is highly replicable, the spatial variation of the pollen spectrum from the honey samples would be much more than the temporal (inter-annual) variations. In other words, given the three factors, Month, Year and Location, honey pollen from different Locations, in a given Year and Month, would be much less similar than samples from different Years, in a given Location and Month. We then determined how the factors, Month, Year and Location, influenced the pollen influx of honey. The pollen analyses of the 42 honey samples collected during the three years yielded 80 pollen taxa/types: 72 dicotyledonous and 8 monocotyledonous, encompassing 41 botanical families spread into seven life forms namely, trees, shrubs, epiphytes, herbs, climbers, grasses, and sedges. Our results showed that pollen spectra were equally comparable between Locations and between Months and Years; the importance of this result is that it helped to demonstrate the complexity of ecological/environmental phenomena involved in the process of foraging by bees in a heterogeneous and complex landscape.

  6. In vitro pollen viability of maize cultivars at different times of collection

    Directory of Open Access Journals (Sweden)

    Emanoel Sanches Martins

    Full Text Available ABSTRACT: In the present study, we aimed to assess the in vitro viability of pollen grains from maize cultivars collected at different times and days in the field. Four cultivars (Sol da Manhã, XB 6012, XB 8010, and BRS 2020 were evaluated from the second to fifth day of anthesis in three times. Pollen samples were evaluated for their in vitro viability through standard germination test in liquid and solid media and tetrazolium staining. The experimental design was completely randomized, in 4x4x3 split-split plots with four replicates. Data were subjected to analysis of variance followed by a means clustering test and linear regression analysis. The average percentage of viable pollen varied according to the day, collection time, and cultivar. In general, XB 8010 and BRS 2020 had the highest frequency of viable pollen. The highest percentages of viable pollen were observed on the second day of anthesis at 10:00h.

  7. New technique to take samples from environmental surfaces using flocked nylon swabs.

    Science.gov (United States)

    Hedin, G; Rynbäck, J; Loré, B

    2010-08-01

    Environmental surfaces near infected and/or colonised patients in hospitals are commonly contaminated with potentially pathogenic micro-organisms. At present, however, there is no standardised method for taking samples from surfaces in order to perform quantitative cultures. Usually contact plates or swabs are used, but these methods may give different results. The recovery rate of traditional swabbing, e.g. cotton or rayon, is poor. With a new type of swab utilising flocked nylon, the recovery may be enhanced up to three times compared with a rayon swab. In this study, we inoculated reference strains of Staphylococcus aureus and Enterococcus hirae onto a bedside table and took samples 1h later when inocula were dry. Sequential samples were taken from the same surface. A new sampling technique using two sequential nylon swabs for each sample was validated. The efficiency of the sampling, percentage recovery of the inoculum and the variation of culture results obtained from repeated experiments are described. Enhanced efficiency and higher recovery of inoculum were demonstrated using two sequential flocked nylon swabs for sampling. Copyright 2010 The Hospital Infection Society. Published by Elsevier Ltd. All rights reserved.

  8. Pollen tube access to the ovule is mediated by glycoprotein secretion on the obturator of apple (Malus × domestica, Borkh).

    Science.gov (United States)

    Losada, Juan M; Herrero, Maria

    2017-04-01

    Within the ovary, the obturator bridges the pathway of the pollen tube from the style to the ovule. Despite its widespread presence among flowering plants, its function has only been studied in a handful of species, and the molecules involved in pollen tube-obturator cross-talk have not been explored hitherto. This work evaluates the involvement of glucans and glycoproteins on pollen tube growth in the obturator of apple flowers ( Malus × domestica) . Pollen tube kinetics were sequentially examined in the pistil and related to changes occurring on the obturator using histochemistry and inmunocytochemistry. To discriminate between changes in the obturator induced by pollen tubes from those developmentally regulated, both pollinated and unpollinated pistils were examined. Pollen tube growth rates were slow in the stigma, faster in the style and slow again in the ovary. The arrival of pollen tubes at the obturator was concomitant with the secretion of proteins, saccharides and glycoprotein epitopes belonging to extensins and arabinogalactan proteins (AGPs). While some of these secretions - extensins and AGPs labelled by JIM13 - were developmentally regulated, others - AGPs labelled by JIM8 - were elicited by the presence of pollen tubes. Following pollen tube passage, all these glycoproteins were depleted. The results show a timely secretion of glycoproteins on the obturator surface concomitant with pollen tube arrival at this structure. The fact that their secretion is depleted following pollen tube passage strongly suggests their role in regulating pollen tube access to the ovule. Remarkably, both the regulation of the secretion of the different glycoproteins, as well as their association with the performance of pollen tubes exhibit similarities with those observed in the stigma, in line with their common developmental origin. © The Author 2017. Published by Oxford University Press on behalf of the Annals of Botany Company. All rights reserved. For Permissions

  9. Rapid Surface Sampling and Archival Record (RSSAR) system. Final report, October 1995 - May 1997

    International Nuclear Information System (INIS)

    1998-01-01

    This report describes the results of Phase 2 efforts to develop a Rapid Surface Sampling and Archival Record (RSSAR) System for the detection of semivolatile organic contaminants on concrete, transite, and metal surfaces. The characterization of equipment and building surfaces for the presence of contaminants as part of building decontamination and decommissioning activities is an immensely large task of concern to both government and industry. Because of the high cost of hazardous waste disposal, old, contaminated buildings cannot simply be demolished and scrapped. Contaminated and clean materials must be clearly identified and segregated so that the clean material can be recycled or reused, if possible, or disposed of more cheaply as nonhazardous waste. DOE has a number of sites requiring surface characterization. These sites are large, contain very heterogeneous patterns of contamination (requiring high sampling density), and will thus necessitate an enormous number of samples to be taken and analyzed. Characterization of building and equipment surfaces will be needed during initial investigations, during cleanup operations, and during the final confirmation process, increasing the total number of samples well beyond that needed for initial characterization. This multiplicity of information places a premium on the ability to handle and track data as efficiently as possible

  10. Rapid Surface Sampling and Archival Record (RSSAR) system. Final report, October 1995--May 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    This report describes the results of Phase 2 efforts to develop a Rapid Surface Sampling and Archival Record (RSSAR) System for the detection of semivolatile organic contaminants on concrete, transite, and metal surfaces. The characterization of equipment and building surfaces for the presence of contaminants as part of building decontamination and decommissioning activities is an immensely large task of concern to both government and industry. Because of the high cost of hazardous waste disposal, old, contaminated buildings cannot simply be demolished and scrapped. Contaminated and clean materials must be clearly identified and segregated so that the clean material can be recycled or reused, if possible, or disposed of more cheaply as nonhazardous waste. DOE has a number of sites requiring surface characterization. These sites are large, contain very heterogeneous patterns of contamination (requiring high sampling density), and will thus necessitate an enormous number of samples to be taken and analyzed. Characterization of building and equipment surfaces will be needed during initial investigations, during cleanup operations, and during the final confirmation process, increasing the total number of samples well beyond that needed for initial characterization. This multiplicity of information places a premium on the ability to handle and track data as efficiently as possible.

  11. Chemical fingerprinting identifies Echium vulgare, Eupatorium cannabinum and Senecio spp. as plant species mainly responsible for pyrrolizidine alkaloids in bee-collected pollen.

    Science.gov (United States)

    Kast, Christina; Kilchenmann, Verena; Reinhard, Hans; Droz, Benoit; Lucchetti, Matteo Angelo; Dübecke, Arne; Beckh, Gudrun; Zoller, Otmar

    2018-02-01

    Various studies have shown that bee-collected pollen sold as nutritional supplements may contain toxic pyrrolizidine alkaloids (PAs) and, thus, pose a potential health risk for consumers. The level of contamination may vary according to its geographical and botanical origin. Here, the PA content of pollen produced in Switzerland was studied and 32 commercially available bee-collected pollen supplements produced between 2010 and 2014 were analysed. In addition, at what time period bees collect PA-containing pollen was investigated. Hence, this study looked into the occurrence of PAs in pollen samples collected daily during two-to-three consecutive seasons. Furthermore, the PA spectrum in pollen was compared to the spectrum found in flower heads of PA-plants to unambiguously identify plants responsible for PA contamination of pollen. The PA concentration of commercial and daily collected pollen was determined by target analysis using an HPLC-MS/MS system, allowing the detection of 18 different PAs and PA N-oxides found in the genera Echium, Eupatorium and Senecio, while the comparison of the PA spectrum in pollen and flower heads was performed by LC-HR-MS, allowing the detection of all PA types in a sample, including saturated, non-carcinogenic PAs. Of the commercially available pollen, 31% contained PAs with a mean concentration of 319 ng/g, mainly Echium- and Eupatorium-type PAs, while the PA concentrations were below the limit of quantitation (LOQ) in 69% of the pollen samples. Bees collected pollen containing Echium-type PAs mainly in June and July, while they gathered pollen containing Eupatorium-type PAs from mid-July to August. Senecio-type PAs appeared from June to September. Comparison of the PA array in pollen and plants identified E. vulgare and E. cannabinum as the main plants responsible for PA contamination of Swiss bee-collected pollen, and to a lesser extent also identified plants belonging to the genus Senecio.

  12. [Radiocarbon dating of pollen and spores in wedge ice from Iamal and Kolyma].

    Science.gov (United States)

    Vasil'chuk, A K

    2004-01-01

    Radiocarbon dating of pollen concentrate from late Pleistocene syngenetic wedge ice was carried out using acceleration mass spectrometry (AMS) in Seyakha and Bizon sections. Comparison of the obtained dating with palynological analysis and AMS radiocarbon dating previously obtained for other organic fractions of the same samples allowed us to evaluate accuracy of dating of different fractions. Quantitative tests for data evaluation were considered in terms of possible autochthonous or allochthonous accumulation of the material on the basis of pre-Pleistocene pollen content in these samples. Paleoecological information content of pollen spectra from late Pleistocene syngenetic wedge ice was evaluated.

  13. Surface characterization of Nb samples electropolished with real superconducting rf accelerator cavities

    Directory of Open Access Journals (Sweden)

    Xin Zhao

    2010-12-01

    Full Text Available We report the results of surface characterizations of niobium (Nb samples electropolished together with a single cell superconducting radio-frequency accelerator cavity. These witness samples were located in three regions of the cavity, namely at the equator, the iris, and the beam pipe. Auger electron spectroscopy was utilized to probe the chemical composition of the topmost four atomic layers. Scanning electron microscopy with energy dispersive x ray for elemental analysis was used to observe the surface topography and chemical composition at the micrometer scale. A few atomic layers of sulfur (S were found covering the samples nonuniformly. Niobium oxide granules with a sharp geometry were observed on every sample. Some Nb-O granules appeared to also contain sulfur.

  14. SURFACE CHARACTERIZATION OF NIOBIUM SAMPLES ELECTRO-POLISHED TOGETHER WITH REAL CAVITIES

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Xin [William and Mary College; Geng, Rongli [JLAB; Funahashi, Y. [KEK; Hayano, H. [KEK; Kato, S. [KEK; Nishiwaki, M. [KEK; Saeki, T. [KEK; Sawabe, M. [KEK; Ueno, K. [KEK; Watanabe, K. [KEK; Tyagi, P. V. [GUAS/AS, Ibaraki

    2009-11-01

    We report the results of surface characterizations of niobium samples electropolished together with single cell cavities. These witness samples were located in three regions of the cavity, namely at the equator, the iris and the beam-pipe. Auger electron spectroscopy (AES) was utilized to probe the chemical composition of the topmost four atomic layers. Scanning electron microscopy with energy dispersive x-ray for elemental analysis (SEM/EDX) was used to observe the surface topography and chemical composition at the micrometer scale. A few atomic layers of sulphur (S) were found covering the samples non-uniformly. Niobium oxide granules with a sharp geometry were observed on every sample. Some Nb-O granules appeared to also contain sulphur.

  15. Review of probabilistic pollen-climate transfer methods

    Science.gov (United States)

    Ohlwein, Christian; Wahl, Eugene R.

    2012-01-01

    Pollen-climate transfer methods are reviewed from a Bayesian perspective and with a special focus on the formulation of uncertainties. This approach is motivated by recent developments of spatial multi-proxy Bayesian hierarchical models (BHM), which allow synthesizing local reconstructions from different proxies for a spatially complete picture of past climate. In order to enhance the pollen realism in these models we try to bridge the gap between spatial statistics and paleoclimatology and show how far classical pollen-climate transfer concepts such as regression methods, mutual climatic range, modern analogues, plant functional types, and biomes can be understood in novel ways by refining the data models used in BHMs. As a case study, we discuss modeling of uncertainty by introducing a new probabilistic pollen ratio model, which is a simplified variation of the modern analogue technique (MAT) including the concept of response surfaces and designed for later inclusion in a spatial multiproxy BHM. Applications to fossil pollen data from varved sediments in three nearby lakes in west-central Wisconsin, USA and for a Holocene fossil pollen record from southern California, USA provide local climate reconstructions of summer temperature for the past millennium and the Holocene respectively. The performance of the probabilistic model is generally similar in comparison to MAT-derived reconstructions using the same data. Furthermore, the combination of co-location and precise dating for the three fossil sites in Wisconsin allows us to study the issue of site-specific uncertainty and to test the assumption of ergodicity in a real-world example. A multivariate ensemble kernel dressing approach derived from the post-processing of climate simulations reveals that the overall interpretation based on the individual reconstructions remains essentially unchanged, but the single-site reconstructions underestimate the overall uncertainty.

  16. Surface analyses of electropolished niobium samples for superconducting radio frequency cavity

    Energy Technology Data Exchange (ETDEWEB)

    Tyagi, P. V.; Nishiwaki, M.; Saeki, T.; Sawabe, M.; Hayano, H.; Noguchi, T.; Kato, S. [GUAS, Tsukuba, Ibaraki 305-0801 (Japan); KEK, Tsukuba, Ibaraki 305-0801 (Japan); KAKEN Inc., Hokota, Ibaraki 311-1416 (Japan); GUAS, Tsukuba, Ibaraki 305-0801 (Japan) and KEK, Tsukuba, Ibaraki 305-0801 (Japan)

    2010-07-15

    The performance of superconducting radio frequency niobium cavities is sometimes limited by contaminations present on the cavity surface. In the recent years extensive research has been done to enhance the cavity performance by applying improved surface treatments such as mechanical grinding, electropolishing (EP), chemical polishing, tumbling, etc., followed by various rinsing methods such as ultrasonic pure water rinse, alcoholic rinse, high pressure water rinse, hydrogen per oxide rinse, etc. Although good cavity performance has been obtained lately by various post-EP cleaning methods, the detailed nature about the surface contaminants is still not fully characterized. Further efforts in this area are desired. Prior x-ray photoelectron spectroscopy (XPS) analyses of EPed niobium samples treated with fresh EP acid, demonstrated that the surfaces were covered mainly with the niobium oxide (Nb{sub 2}O{sub 5}) along with carbon, in addition a small quantity of sulfur and fluorine were also found in secondary ion mass spectroscopy (SIMS) analysis. In this article, the authors present the analyses of surface contaminations for a series of EPed niobium samples located at various positions of a single cell niobium cavity followed by ultrapure water rinsing as well as our endeavor to understand the aging effect of EP acid solution in terms of contaminations presence at the inner surface of the cavity with the help of surface analytical tools such as XPS, SIMS, and scanning electron microscope at KEK.

  17. Adaptive Sampling based 3D Profile Measuring Method for Free-Form Surface

    Science.gov (United States)

    Duan, Xianyin; Zou, Yu; Gao, Qiang; Peng, Fangyu; Zhou, Min; Jiang, Guozhang

    2018-03-01

    In order to solve the problem of adaptability and scanning efficiency of the current surface profile detection device, a high precision and high efficiency detection approach is proposed for surface contour of free-form surface parts based on self- adaptability. The contact mechanical probe and the non-contact laser probe are synthetically integrated according to the sampling approach of adaptive front-end path detection. First, the front-end path is measured by the non-contact laser probe, and the detection path is planned by the internal algorithm of the measuring instrument. Then a reasonable measurement sampling is completed according to the planned path by the contact mechanical probe. The detection approach can effectively improve the measurement efficiency of the free-form surface contours and can simultaneously detect the surface contours of unknown free-form surfaces with different curvatures and even different rate of curvature. The detection approach proposed in this paper also has important reference value for free-form surface contour detection.

  18. Magnetic hysteresis classification of the lunar surface and the interpretation of permanent remanence in lunar surface samples

    Science.gov (United States)

    Wasilewski, P.

    1972-01-01

    A magnetic hysteresis classification of the lunar surface is presented. It was found that there is a distinct correlation between natural remanence (NRM), saturation magnetization, and the hysteresis ratios for the rock samples. The hysteresis classification is able to explain some aspects of time dependent magnetization in the lunar samples and relates the initial susceptibility to NRM, viscous remanence, and to other aspects of magnetization in lunar samples. It is also considered that since up to 60% of the iron in the lunar soil may be super paramagnetic at 400 K, and only 10% at 100 K, the 50% which becomes ferromagnetic over the cycle has the characteristics of thermoremanence and may provide for an enhancement in measurable field on the dark side during a subsatellite magnetometer circuit.

  19. Structure of the Pollen Exine of Rhoiptelea chiliantha

    Directory of Open Access Journals (Sweden)

    Annie Skarby

    2009-06-01

    Full Text Available The exine of mature pollen grains of Rhoiptelea chiliantha was studied. The size of the pollen grains is about 23 by 27 μm. They are tricolporate with short colpi that are 1-2 μm wide and 10-12 long. The spinules of Rhoiptelea are similar in form and size to those of Gentianales. The spinules consist of rods of ca 70 nm in width. These rods are evident throughout the tectum and columellae. The columellae are of two distinct sizes. The smaller ones are ca 70 nm wide and join the tectum and the larger columellae. These larger ones appear to be composed of several 70 nm in width rods. They join the distal surface of the foot layer. The proximal surface of the foot layer is marked by a white line (referred to as a junction plane where it joins the endexine. The endexine consists of a solid-appearing component adjacent to the foot layer (referred to as endexine-1 and laminar components (endexine-2 that are attached to and apparently become a part of endexine-1. There is no indication of an arcus. In well preserved grains the aperture is covered by an operculum or operculum-like component. In well-rehydrated pollen grains there is an oncus of considerable complexity under the aperture and over the intine. The Ubisch bodies have an exine ornamented with widely-spaced spinules like the spinules on the pollen exine.

  20. Proteomics of pollen development and germination.

    Science.gov (United States)

    Dai, Shaojun; Wang, Tai; Yan, Xiufeng; Chen, Sixue

    2007-12-01

    In higher plants, pollen grains represent the vestiges of a highly reduced male gametophyte generation. After germination, the pollen tube delivers the sperm cells by tip-growing to the embryo sac for fertilization. Besides the intrinsic importance for sexual reproduction, pollen development and germination serve as an attractive system to address important questions related to cell division, cell differentiation, polar growth, cell-cell interaction, and cell fate. Recently, pollen functional specification has been well-studied using multidisciplinary approaches. Here, we review recent advances in proteomics of pollen development and germination.

  1. Pollen Foraging by Honey Bees (Apis Mellifera L. in Greece: Botanical and Geographical Origin

    Directory of Open Access Journals (Sweden)

    Dimou Maria

    2014-12-01

    Full Text Available Pollen is very important for honey bee colony development and nutrition. It is also a valuable product for human consumption, considered to have high nutritional value. In this study, we performed melissopalynological analysis of 285 pollen load samples collected from 44 apiaries throughout Greece. The analysis revealed 229 plant taxa represented in total. The abundance of each pollen type varied among the geographical areas from which the samples were collected. We also observed variation among samples collected from the same geographical region. The most frequently found families were Fabaceae, Asteraceae and Rosaceae. The most frequently observed taxa were Brassicaceae, Carduus type, Cistus and Papaver rhoeas. Statistical analysis showed that the geographical classification of pollen samples among northern, central and southern Greece is possible.

  2. Physicochemical composition and antioxidant potential of bee pollen from different botanical sources in Alagoas, Brazil

    Directory of Open Access Journals (Sweden)

    Maria Raphaella dos Santos Vasconcelos

    Full Text Available ABSTRACT Bee pollen results from the mixture of pollen and floral nectar with the salivary substances of bees and has increasingly been used as a food with therapeutic properties. In this study, 30 samples of bee pollen from Apis mellifera apiaries in three mesoregions of Alagoas (Brazil - Mata Atlântica, South Coast and Caatinga, were collected during the dry season of 2008/09 and analysed. Mata Atlântica and Caatinga had good production of bee pollen. In the same season, Mata Atlântica contained a higher diversity of pollen types for feeding bees with a predominance of herbaceous pollen (63%, whereas the Caatinga samples contained monofloral pollen. Physicochemical data were analysed with the nonparametric Kruskal-Wallis statistical test. The Caatinga samples were analysed to determine their contents of total phenolic compounds (25.85 ± 10.80 mg gallic acid eq/g and flavonoids (45.62 ± 32.19 mg quercetin eq/g and their antioxidant activity (for instance, 70.62 ± 4.50% in the DPPH test, which were possibly affected by the environmental conditions of this biome.

  3. A Simple, Inexpensive Pollen Trap

    Science.gov (United States)

    P. E. Hoekstra

    1965-01-01

    Pollen plays a role of vital importance in the sexual reproduction of all plants but it is especially important in forestry. With few exceptions, sexual reproduction is the only link between succeeding generations in the forest. To be sure, vegetative reproduction is important for special purposes, but it will probably not be used on a mass scale in timber...

  4. Comparative Pollen Development in Dioscoreales

    NARCIS (Netherlands)

    Schols, P.; Furness, C.; Merckx, V.; Wilkin, P.; Smets, E.

    2005-01-01

    Pollen and orbicule ontogeny in representatives of three genera of Dioscoreales—Narthecium ossifragum Huds. (Nartheciaceae), Tacca artocarpifolia Seem. and Tacca chantrieri Andre´ (Dioscoreaceae), and Dioscorea communis (L.) Caddick & Wilkin (Dioscoreaceae)—is described and illustrated using LM,

  5. Surface chemical characterization of PM{sub 10} samples by XPS

    Energy Technology Data Exchange (ETDEWEB)

    Atzei, Davide, E-mail: datzei@unica.it [Dipartimento di Scienze Chimiche e Geologiche, Università di Cagliari, Complesso Universitario di Monserrato, S.S. 554 Bivio per Sestu, I-09042 Monserrato, Cagliari (Italy); Fantauzzi, Marzia; Rossi, Antonella [Dipartimento di Scienze Chimiche e Geologiche, Università di Cagliari, Complesso Universitario di Monserrato, S.S. 554 Bivio per Sestu, I-09042 Monserrato, Cagliari (Italy); Fermo, Paola [Dipartimento di Chimica, Università degli Studi Milano, Via Golgi 19, I-20133 Milano (Italy); Piazzalunga, Andrea [Dipartimento di Chimica, Università degli Studi Milano, Via Golgi 19, I-20133 Milano (Italy); Dipartimento di Scienze dell’Ambiente e del territorio, Università degli Studi di Milano-Bicocca, Piazza della Scienza 1, I-20122 Milano (Italy); Valli, Gianluigi; Vecchi, Roberta [Dipartimento di Fisica, Università degli Studi di Milano, via Celoria 16, I-20133 Milano (Italy)

    2014-07-01

    Samples of particulate matter (PM) collected in the city of Milan during wintertime were analyzed by X-ray photoelectron spectroscopy (XPS), thermal optical transmittance (TOT), ionic chromatography (IC) and X-ray fluorescence (XRF) in order to compare quantitative bulk analysis and surface analysis. In particular, the analysis of surface carbon is here presented following a new approach for the C1s curve fitting aiming this work to prove the capability of XPS to discriminate among elemental carbon (EC) and organic carbon (OC) and to quantify the carbon-based compounds that might be present in the PM. Since surface of urban PM is found to be rich in carbon it is important to be able to distinguish between the different species. XPS results indicate that aromatic and aliphatic species are adsorbed on the PM surface. Higher concentrations of (EC) are present in the bulk. Also nitrogen and sulfur were detected on the surfaces and a qualitative and quantitative analysis is provided. Surface concentration of sulfate ion is equal to that found by bulk analysis; moreover surface analysis shows an additional signal due to organic sulfur not detectable by the other methods. Surface appears to be also enriched in nitrogen.

  6. Taraxacum officinale pollen depresses seed set of montane wildflowers through pollen allelopathy

    Directory of Open Access Journals (Sweden)

    Deirdre Loughnan

    2014-08-01

    Full Text Available Plant species that share pollinators can suffer from interspecific pollen deposition. Male reproductive success is inevitably reduced by the loss of pollen to flowers of another species. Female reproductive success can be affected by reduced stigmatic area or, more strongly, through allelopathic effects by which the admixture of some foreign pollen reduces seed or fruit set. We tested for allelopathic effects of Taraxacum officinale (Asteracaeae pollen on the seed set of montane wildflowers Erythronium grandiflorum (Liliaceae and Erysimum capitatum (Brassicaceae, by hand-pollinating plants with pollen mixtures. Taraxacum is a common invasive species, which produces allelopathic chemicals in its root and vegetative tissue, making it a likely candidate for pollen allelopathy. Flowers of both species produced fewer well-developed seeds when pollinated with pollen mixtures containing Taraxacum pollen. The pollen-allelopathic potential of weedy dandelion may add to its ability to disrupt communities that it invades.

  7. Influence of surface topography on the secondary electron yield of clean copper samples.

    Science.gov (United States)

    Hu, Xiao-Chuan; Cao, Meng; Cui, Wan-Zhao

    2016-11-01

    Secondary electron yield (SEY) due to electron impact depends strongly on surface topography. The SEY of copper samples after Ar-ion bombardment is measured in situ in a multifunctional ultrahigh vacuum system. Increasing the ion energy or duration of ion bombardment can even enlarge the SEY, though it is relatively low under moderate bombardment intensity. The results obtained with scanning electron microscopy and atomic force microscopy images demonstrate that many valley structures of original sample surfaces can be smoothed due to ion bombardment, but more hill structures are generated with stronger bombardment intensity. With increasing the surface roughness in the observed range, the maximum SEY decreases from 1.2 to 1.07 at a surface characterized by valleys, while it again increases to 1.33 at a surface spread with hills. This phenomenon indicates that hill and valley structures are respectively effective in increasing and decreasing the SEY. These obtained results thus provide a comprehensive insight into the surface topography influence on the secondary electron emission characteristics in scanning electron microscopy. Copyright © 2016 Elsevier Ltd. All rights reserved.

  8. Evaluation of Skin Surface as an Alternative Source of Reference DNA Samples: A Pilot Study.

    Science.gov (United States)

    Albujja, Mohammed H; Bin Dukhyil, Abdul Aziz; Chaudhary, Abdul Rauf; Kassab, Ahmed Ch; Refaat, Ahmed M; Babu, Saranya Ramesh; Okla, Mohammad K; Kumar, Sachil

    2018-01-01

    An acceptable area for collecting DNA reference sample is a part of the forensic DNA analysis development. The aim of this study was to evaluate skin surface cells (SSC) as an alternate source of reference DNA sample. From each volunteer (n = 10), six samples from skin surface areas (forearm and fingertips) and two traditional samples (blood and buccal cells) were collected. Genomic DNA was extracted and quantified then genotyped using standard techniques. The highest DNA concentration of SSC samples was collected using the tape/forearm method of collection (2.1 ng/μL). Cotton swabs moistened with ethanol yielded higher quantities of DNA than swabs moistened with salicylic acid, and it gave the highest percentage of full STR profiles (97%). This study supports the use of SSC as a noninvasive sampling technique and as a extremely useful source of DNA reference samples among certain cultures where the use of buccal swabs can be considered socially unacceptable. © 2017 American Academy of Forensic Sciences.

  9. Vegetation and Climate history of Franz Jozef Land Archipelago in the Late Holocene according pollen data

    Science.gov (United States)

    Nosevich, Ekaterina; Anisimov, Michail; Sapelko, Tatyana

    2015-04-01

    The archipelago Franz-Josef Land is situated in the Arctic Ocean (80°40' N, 54°50'E). It is one of the important areas for arctic research due to organization of Russian Arctic National Park there. Therefore, an interest to the environmental history of this territory grows up and any new data might have a high value. However, geographical remoteness of the archipelago is the reason why there are not much work has been done up to date. .A focus of our researches is vegetation and climate reconstruction during the Late Holocene history according pollen data. In frame of studying of the Franz Josef Land during complex expedition of Russian Arctic National Park on the islands geomorphological and botanical researches was occurred. Nowadays the typical island of archipelago presents the ice cap and glacier-free marine terraces of 35 m high at maximum, where solifluction and permafrost are developed. The archipelago has a maritime Arctic climate. Vegetation of archipelago Franz-Josef Land presents the northern type of Polar Desert. It includes 57 species of vascular plants (Poaceae, Juncaceae, Caryophyllaceae, Brassicaceae, Saxifragaceae etc). We studied the peat core from the southern part of Majbel Island, in the archipelago Franz Josef Land. More than a half of the island is covered by glacier. The core was sampled at the inner margin of ice-free high marine terrace, near the southern slope of bedrock hill. We received preliminary pollen data and radiocarbon data 3010±80 C14 y.a. at the bottom. The pollen concentration is low, but we manage to make some reconstructions of vegetation and climate. For correct interpretation of our results, we used surface samples from different islands of archipelago (Jackson, Hooker, Greely, Alexsandra land, Yeva-Liv, Appolonov, Georg land, Kane, Bell). Subrecent spectra include species presented in flora of region, but also those which are not founded at this region in this time.

  10. Pollen selection under acid rain stress

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Y.

    1994-01-01

    To investigate whether acid rain stress induces pollen selection in nature, three different approaches were used, based on the assumption that the response of pollen grains to acid rain is controlled by an acid sensitive gene product. Germination of pollen from homozygous and heterozygous individuals under acid rain stress was examined to detect any differences in rate of germination between populations of homogeneous and heterogeneous pollen grains. In vitro and in vivo bulked segregant analysis using RAPDs was used to search for differences in DNA constitution between the survivors of acid rain stressed and non-acid rain stressed pollen populations in vitro and between the progenies of acid rain stressed and non-acid rain stressed populations during pollination, respectively. No evidence for the pollen selection under acid rain stress was obtained in any of the test systems. Inhibition of protein synthesis using cycloheximide led to significant reduction of tube elongation at 4 hr and had no effect on pollen germination at any time interval tested. Total proteins extracted from control and acid rain stressed pollen grain populations exhibited no differences. The reduction of corn pollen germination in vitro under acid rain stress was mainly due to pollen rupture. The present data indicates the reduction of pollen germination and tube growth under acid rain stress may be a physiological response rather than a genetic response. A simple, nontoxic, and effective method to separate germinated from ungerminated pollen grains has been developed using pollen from corn (Zea mays, L. cv. Pioneer 3747). The separated germinated pollen grains retained viability and continued tube growth when placed in culture medium.

  11. Microbiology of the surface water samples in the high background radiation areas of Ramsar, Iran

    International Nuclear Information System (INIS)

    Motamedifar, Mohammad; Zamani, Khosrow; Sedigh, Hadi; Mortazavi, Seyed Mohammad Javad; Taeb, Shahram; Haghani, M.; Mortazavi, Seyed Ali Reza; Soofi, Amir

    2014-01-01

    Residents of high background radiation areas of Ramsar have lived in these areas for many generations and received radiation doses much higher than the dose limit recommended by ICRP for radiation workers. The radioactivity of the high background radiation areas of Ramsar is reported to be due to 226 Ra and its decay products, which have been brought to the surface by the waters of hot springs. Over the past years the department has focused on different aspects of the health effects of the elevated levels of natural radiation in Ramsar. This study was aimed to perform a preliminary investigation on the bioeffects of exposure to elevated levels of natural radiation on the microbiology of surface water samples. Water samples were collected from surface water streams in Talesh Mahalleh district, Ramsar as well as a nearby area with normal levels of background radiation. Only two strains of bacteria, that is, Providencia stuartii and Shimwellia blattae, could be isolated from the water samples collected from high background radiation areas, while seven strains (Escherichia coli, Enterobacter asburiae, Klebsiella pneumoniae, Shigella dysenteriae, Buttiauxella agerstis, Tatumella punctuata and Raoultella ornithinolytica) were isolated from the water samples collected from normal background radiation areas. All the bacteria isolated from water samples of high and normal background radiation areas were sensitive to ultraviolet radiation, heat, betadine, alcohol, and deconex. Although other investigators have reported that bacteria isolated from hot springs show radioresistance, the results reported here do not reveal any adaptive response. (author)

  12. Satellite Phenology Observations Inform Peak Season of Allergenic Grass Pollen Aerobiology across Two Continents

    Science.gov (United States)

    Huete, A. R.; Devadas, R.; Davies, J.

    2015-12-01

    Pollen exposure and prevalence of allergenic diseases have increased in many parts of the world during the last 30 years, with exposure to aeroallergen grass pollen expected to intensify with climate change, raising increased concerns for allergic diseases. The primary contributing factors to higher allergenic plant species presence are thought to be climate change, land conversion, and biotic mixing of species. Conventional methods for monitoring airborne pollen are hampered by a lack of sampling sites and heavily rely on meteorology with less attention to land cover updates and monitoring of key allergenic species phenology stages. Satellite remote sensing offers an alternative method to overcome the restrictive coverage afforded by in situ pollen networks by virtue of its synoptic coverage and repeatability of measurements that enable timely updates of land cover and land use information and monitoring landscape dynamics and interactions with human activity and climate. In this study, we assessed the potential of satellite observations of urban/peri-urban environments to directly inform landscape conditions conducive to pollen emissions. We found satellite measurements of grass cover phenological evolution to be highly correlated with in situ aerobiological grass pollen concentrations in five urban centres located across two hemispheres (Australia and France). Satellite greenness data from the Moderate Resolution Imaging Spectroradiometer (MODIS) were found to be strongly synchronous with grass pollen aerobiology in both temperate grass dominated sites (France and Melbourne), as well as in Sydney, where multiple pollen peaks coincided with the presence of subtropical grasses. Employing general additive models (GAM), the satellite phenology data provided strong predictive capabilities to inform airborne pollen levels and forecast periods of grass pollen emissions at all five sites. Satellite phenology offer promising opportunities of improving public health risk

  13. Measuring pesticides in surface waters - continuous versus event-based sampling design

    Science.gov (United States)

    Eyring, J.; Bach, M.; Frede, H.-G.

    2009-04-01

    Monitoring pesticides in surface waters is still a work- and cost-intensive procedure. Therefore, studies are normally carried out with a low monitoring frequency or with only a small selection of substances to be analyzed. In this case, it is not possible to picture the high temporal variability of pesticide concentrations, depending on application dates, weather conditions, cropping seasons and other factors. In 2007 the Institute of Landscape Ecology and Resource Management at Giessen University implemented a monitoring program during two pesticide application periods aiming to produce a detailed dataset of pesticide concentration for a wide range of substances, and which would also be suitable for the evaluation of catchment-scale pesticide exposure models. The Weida catchment in Thuringia (Eastern Germany) was selected as study area due to the availability of detailed pesticide application data for this region. The samples were taken from the river Weida at the gauge Zeulenroda, where it flows into a drinking water reservoir. The catchment area is 102 km². 67% of the area are in agricultural use, the main crops being winter wheat, maize, winter barley and winter rape. Dominant soil texture classes are loamy sand and loamy silt. About one third of the agricultural area is drained. The sampling was carried out in cooperation with the water supply agency of Thuringia (Fernwasserversorgung Thueringen). The sample analysis was done by the Institute of Environmental Research at Dortmund University. Two sampling schemes were carried out using two automatic samplers: continuous sampling with composite samples bottled two times per week and event-based sampling triggered by a discharge threshold. 53 samples from continuous sampling were collected. 19 discharge events were sampled with 45 individual samples (one to six per event). 34 pesticides and two metabolites were analyzed. 21 compounds were detected, nine of which having concentrations above the drinking water

  14. Pollen analyses from a 50 000-yr rodent midden series in the southern Atacama Desert (25° 300' S)

    Science.gov (United States)

    Maldonado, Antonio; Betancourt, Julio L.; Latorre, Claudio; Villagran, Carolina

    2005-01-01

    Precipitation in northern Chile is controlled by two great wind belts—the southern westerlies over the southern Atacama and points south (>24° S) and the tropical easterlies over the northern and central Atacama Desert (16–24° S). At the intersection of these summer and winter rainfall regimes, respectively, is a Mars-like landscape consisting of expansive surfaces devoid of vegetation (i.e. absolute desert) except in canyons that originate high enough to experience runoff once every few years. Pollen assemblages from 39 fossil rodent middens in one of these canyons, Quebrada del Chaco (25° 30' S), were used to infer the history of vegetation and precipitation at three elevations (2670–800 m; 3100–3200 m; 3450–3500 m) over the past 50 000 years. When compared to modern conditions and fossil records to the north and south, the pollen evidence indicates more winter precipitation at >52, 40–33, 24–17 k cal.yrBP, more precipitation in both seasons at 17–14 k cal. yr BP, and more summer precipitation from 14–11 k cal. yr BP. Younger middens are scarce at Quebrada del Chaco, and the few Holocene samples indicate hyperarid conditions comparable to today. The only exception is a pollen assemblage that indicates a brief but significant interlude of increased winter precipitation in the last millennium.

  15. Stable isotope analysis of pollen as a palaeoindicator - Methodological considerations and future challenges

    International Nuclear Information System (INIS)

    Loader, N.J.; Hemming, D.L.

    2002-01-01

    of modern pollen were analysed for their stable carbon isotope composition and compared with environmental variables to assess the potential of this method as a new quantitative terrestrial palaeoindicator. Results demonstrate a strong positive correlation (r 2 =0.68) between the temperature during a development period (approximately 4 weeks) prior to efflorescence and δ 13 C pollen . Owing to variations in the chemical composition of the pollen grains and associated post depositional diagenesis we favour the isolation of the sporopollenin exina for isotopic analysis. A broad similarity in isotopic response was observed between three European tree genera, however significant absolute differences in δ 13 C pollen preclude any meaningful interpretation or palaeoenvironmental inference based solely upon a potentially variable bulk pollen sample. Consequently, we propose the isolation and analysis of a single genus when examining samples from antiquity. Preliminary extraction methods indicate that this approach is feasible using manual separation/hand picking methods and standard combustion continuous-flow isotope ratio mass spectrometry. If these initial results are representative of wider plant response, δ 13 C pollen may be used to reconstruct environmental change during pollen development and provide an indication of variations in mean annual temperature. (author)

  16. Synthesis of surface nano-molecularly imprinted polymers for sensitive baicalin detection from biological samples.

    Science.gov (United States)

    Gu, Xiaoli; He, Hongliang; Wang, Chong-Zhi; Gao, Yankun; Zhang, Hongjuan; Hong, Junli; Du, Shuhu; Chen, Lina; Yuan, Chun-Su

    2015-01-01

    Surface molecularly imprinted polymers (MIP@SBA-15) imprinted on the surface of hybrid nanostructured organic/inorganic materials (SBA-15) were prepared for the selective extraction and detection of baicalin (BA) from biological samples. The surface morphologies and characteristics of the imprinted and non-imprinted polymers were characterized by Fourier transform infrared (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermo-gravimetric analysis (TGA) and nitrogen adsorption-desorption isotherms. The results indicated that the polymers were successfully grafted on the surface of SBA-15 and possessed a highly ordered mesoporous structure. In binding tests, MIP@SBA-15 reached saturated adsorption within 80 min and exhibited significant specific recognition toward BA with large adsorption capacity. Meanwhile, the prepared MIP@SBA-15 was used as a selective sorbent for solid-phase extraction of BA from biological samples. Recoveries of BA from the liver and spleen ranged from 90.6% to 90.9% with RSD < 3.7%. All these results reveal that this method is simple, rapid and sensitive for effectively extracting and detecting trace BA in biological samples.

  17. Pollen development in Annona cherimola Mill. (Annonaceae. Implications for the evolution of aggregated pollen

    Directory of Open Access Journals (Sweden)

    Hormaza Jose I

    2009-10-01

    Full Text Available Abstract Background In most flowering plants, pollen is dispersed as monads. However, aggregated pollen shedding in groups of four or more pollen grains has arisen independently several times during angiosperm evolution. The reasons behind this phenomenon are largely unknown. In this study, we followed pollen development in Annona cherimola, a basal angiosperm species that releases pollen in groups of four, to investigate how pollen ontogeny may explain the rise and establishment of this character. We followed pollen development using immunolocalization and cytochemical characterization of changes occurring from anther differentiation to pollen dehiscence. Results Our results show that, following tetrad formation, a delay in the dissolution of the pollen mother cell wall and tapetal chamber is a key event that holds the four microspores together in a confined tapetal chamber, allowing them to rotate and then bind through the aperture sites through small pectin bridges, followed by joint sporopollenin deposition. Conclusion Pollen grouping could be the result of relatively minor ontogenetic changes beneficial for pollen transfer or/and protection from desiccation. Comparison of these events with those recorded in the recent pollen developmental mutants in Arabidopsis indicates that several failures during tetrad dissolution may convert to a common recurring phenotype that has evolved independently several times, whenever this grouping conferred advantages for pollen transfer.

  18. Pollen development in Annona cherimola Mill. (Annonaceae). Implications for the evolution of aggregated pollen

    Science.gov (United States)

    Lora, Jorge; Testillano, Pilar S; Risueño, Maria C; Hormaza, Jose I; Herrero, Maria

    2009-01-01

    Background In most flowering plants, pollen is dispersed as monads. However, aggregated pollen shedding in groups of four or more pollen grains has arisen independently several times during angiosperm evolution. The reasons behind this phenomenon are largely unknown. In this study, we followed pollen development in Annona cherimola, a basal angiosperm species that releases pollen in groups of four, to investigate how pollen ontogeny may explain the rise and establishment of this character. We followed pollen development using immunolocalization and cytochemical characterization of changes occurring from anther differentiation to pollen dehiscence. Results Our results show that, following tetrad formation, a delay in the dissolution of the pollen mother cell wall and tapetal chamber is a key event that holds the four microspores together in a confined tapetal chamber, allowing them to rotate and then bind through the aperture sites through small pectin bridges, followed by joint sporopollenin deposition. Conclusion Pollen grouping could be the result of relatively minor ontogenetic changes beneficial for pollen transfer or/and protection from desiccation. Comparison of these events with those recorded in the recent pollen developmental mutants in Arabidopsis indicates that several failures during tetrad dissolution may convert to a common recurring phenotype that has evolved independently several times, whenever this grouping conferred advantages for pollen transfer. PMID:19874617

  19. The long pollen tube journey and in vitro pollen germination of Phalaenopsis orchids.

    Science.gov (United States)

    Chen, Jhun-Chen; Fang, Su-Chiung

    2016-06-01

    Pollen biology in P. aphrodite. Orchids have a distinct reproductive program. Pollination triggers ovule development and differentiation within flowers, and fertilization occurs days to months after pollination. It is unclear how pollen tubes travel through the developing ovaries during ovule development and when pollen tubes arrive at the mature embryo sac to achieve fertilization. Here, we report a robust staining protocol to image and record the timing of pollen germination, progressive growth of pollen tubes in ovaries, and arrival of pollen tubes at embryo sacs in Phalaenopsis aphrodite. The pollen germinated and pollen tubes entered the ovary 3 days after pollination. Pollen tubes continued to grow and filled the entire cavity of the ovary as the ovary elongated and ovules developed. Pollen tubes were found to enter the matured embryo sacs at approximately 60-65 days after pollination in an acropetal manner. Moreover, these temporal changes in developmental events such as growth of pollen tubes and fertilization were associated with expression of molecular markers. In addition, we developed an in vitro pollen germination protocol, which is valuable to enable studies on pollen tube guidance and tip growth regulation in Phalaenopsis orchids and possibly in other orchid species.

  20. High exposure to endotoxin in farming is associated with less new-onset pollen sensitisation

    DEFF Research Database (Denmark)

    Elholm, Grethe; Schlünssen, Vivi; Doekes, Gert

    2018-01-01

    of 1113 young Danish farmers and rural controls, with a mean age of 19 years at baseline. Sensitisation to birch pollen, grass pollen, cat dander and house dust mite was measured by specific IgE levels in serum samples from baseline and at 15 years' follow-up. Changes in sensitisation were analysed...... was not associated with significant changes in cat dander and house dust mite sensitisation. CONCLUSIONS: High exposure to endotoxin during young adulthood appears to protect against new onset of pollen sensitisation, independent of childhood farm exposure....

  1. Partial inhibition of in vitro pollen germination by simulated solar ultraviolet-B radiation

    International Nuclear Information System (INIS)

    Flint, S.D.; Caldwell, M.M.

    1984-01-01

    Pollen from four temperate-latitude taxa were treated with UV radiation in a portion of the UV-B (280-320 nm) waveband during in vitro germination. Inhibition of germination was noted in this pollen compared to samples treated identically except for the exclusion of the UV-B portion of the spectrum. Levels similar to maximum solar UV-B found in temperate-latitude areas failed to inhibit pollen germination significantly, while levels similar to maximum solar UV-B found in equatorial alpine locations caused partial inhibition of germination in three of the four taxa examined

  2. Pollen parameters estimates of genetic variability among newly ...

    African Journals Online (AJOL)

    Estimates of some pollen parameters where used to assess the genetic diversity among some newly selected Nigerian Roselle (Hibiscus sabdariffa L.). Standard procedures were used to determine the pollen parameters such as: percentage pollen fertility, percentage pollen sterility, pollen diameters as well as anther ...

  3. Pollen-based biome reconstructions for Latin America at 0, 6000 and 18 000 radiocarbon years ago

    NARCIS (Netherlands)

    Marchant, R.; Cleef, A.; Harrison, S.P.; Hooghiemstra, H.; Markgraf, V.; van Boxel, J.; Ager, T.; Almeida, L.; Anderson, R.; Baied, C.; Behling, H.; Berrio, J.C.; Burbridge, R.; Björck, S.; Byrne, R.; Bush, M.; Duivenvoorden, J.; Flenley, J.; de Oliveira, P.; van Geel, B.; Graf, K.; Gosling, W.D.; Harbele, S.; van der Hammen, T.; Hansen, B.; Horn, S.; Kuhry, P.; Ledru, M-P.; Mayle, F.; Leyden, B.; Lozano-García, S.; Melief, A.M.; Moreno, P.; Moar, N.T.; Prieto, A.; van Reenen, G.; Salgado-Labouriau, M.; Schäbitz, F.; Schreve-Brinkman, E.J.; Wille, M.

    2009-01-01

    The biomisation method is used to reconstruct Latin American vegetation at 6000±500 and 18 000±1000 radiocarbon years before present (14C yr BP) from pollen data. Tests using modern pollen data from 381 samples derived from 287 locations broadly reproduce potential natural vegetation. The strong

  4. Volatile compounds and palynological analysis from pollen pots of stingless bees from the mid-north region of Brazil

    Directory of Open Access Journals (Sweden)

    José de Sousa Lima Neto

    2017-06-01

    Full Text Available ABSTRACT Samburá is the botanical pollen nectar agglutinated by salivary secretions of bees. Stingless bee pollen samples were collected in three periods of the year in Monsenhor Gil town, PI, Brazil, for extraction of volatile constituents by different techniques, analyzed by gas chromatography-mass spectrometry (GC-MS and the palynological analysis used to identify the dominant pollen. Among the volatile compounds identified, kaur-16-ene, methyl and ethyl hexadecanoate, methyl linoleate and heneicosane were identified more frequently in the studied parameters: period of sample collection and extraction techniques used. The palynological analysis identified the pollen of Mimosa caesalpiniifolia Benth. as the dominant pollen in all samples studied.

  5. Microplastics in Arctic polar waters: the first reported values of particles in surface and sub-surface samples

    Science.gov (United States)

    Lusher, Amy L.; Tirelli, Valentina; O'Connor, Ian; Officer, Rick

    2015-10-01

    Plastic, as a form of marine litter, is found in varying quantities and sizes around the globe from surface waters to deep-sea sediments. Identifying patterns of microplastic distribution will benefit an understanding of the scale of their potential effect on the environment and organisms. As sea ice extent is reducing in the Arctic, heightened shipping and fishing activity may increase marine pollution in the area. Microplastics may enter the region following ocean transport and local input, although baseline contamination measurements are still required. Here we present the first study of microplastics in Arctic waters, south and southwest of Svalbard, Norway. Microplastics were found in surface (top 16 cm) and sub-surface (6 m depth) samples using two independent techniques. Origins and pathways bringing microplastic to the Arctic remain unclear. Particle composition (95% fibres) suggests they may either result from the breakdown of larger items (transported over large distances by prevailing currents, or derived from local vessel activity), or input in sewage and wastewater from coastal areas. Concurrent observations of high zooplankton abundance suggest a high probability for marine biota to encounter microplastics and a potential for trophic interactions. Further research is required to understand the effects of microplastic-biota interaction within this productive environment.

  6. Microplastics in Arctic polar waters: the first reported values of particles in surface and sub-surface samples

    Science.gov (United States)

    Lusher, Amy L.; Tirelli, Valentina; O’Connor, Ian; Officer, Rick

    2015-01-01

    Plastic, as a form of marine litter, is found in varying quantities and sizes around the globe from surface waters to deep-sea sediments. Identifying patterns of microplastic distribution will benefit an understanding of the scale of their potential effect on the environment and organisms. As sea ice extent is reducing in the Arctic, heightened shipping and fishing activity may increase marine pollution in the area. Microplastics may enter the region following ocean transport and local input, although baseline contamination measurements are still required. Here we present the first study of microplastics in Arctic waters, south and southwest of Svalbard, Norway. Microplastics were found in surface (top 16 cm) and sub-surface (6 m depth) samples using two independent techniques. Origins and pathways bringing microplastic to the Arctic remain unclear. Particle composition (95% fibres) suggests they may either result from the breakdown of larger items (transported over large distances by prevailing currents, or derived from local vessel activity), or input in sewage and wastewater from coastal areas. Concurrent observations of high zooplankton abundance suggest a high probability for marine biota to encounter microplastics and a potential for trophic interactions. Further research is required to understand the effects of microplastic-biota interaction within this productive environment. PMID:26446348

  7. Nature's Notebook Provides Phenology Observations for NASA Juniper Phenology and Pollen Transport Project

    Science.gov (United States)

    Luval, J. C.; Crimmins, T. M.; Sprigg, W. A.; Levetin, E.; Huete, A.; Nickovic, S.; Prasad, A.; Vukovic, A.; VandeWater, P. K.; Budge, A. M.; hide

    2014-01-01

    Phenology Network has been established to provide national wide observations of vegetation phenology. However, as the Network is still in the early phases of establishment and growth, the density of observers is not yet adequate to sufficiently document the phenology variability over large regions. Hence a combination of satellite data and ground observations can provide optimal information regarding juniperus spp. pollen phenology. MODIS data was to observe Juniperus supp. pollen phenology. The MODIS surface reflectance product provided information on the Juniper supp. cone formation and cone density. Ground based observational records of pollen release timing and quantities were used as verification. Approximately 10, 818 records of juniper phenology for male cone formation Juniperus ashei., J. monosperma, J. scopulorum, and J. pinchotti were reported by Nature's Notebook observers in 2013 These observations provided valuable information for the analysis of satellite images for developing the pollen concentration masks for input into the PREAM (Pollen REgional Atmospheric Model) pollen transport model. The combination of satellite data and ground observations allowed us to improve our confidence in predicting pollen release and spread, thereby improving asthma and allergy alerts.

  8. Semi-automatic surface sediment sampling system - A prototype to be implemented in bivalve fishing surveys

    Science.gov (United States)

    Rufino, Marta M.; Baptista, Paulo; Pereira, Fábio; Gaspar, Miguel B.

    2018-01-01

    In the current work we propose a new method to sample surface sediment during bivalve fishing surveys. Fishing institutes all around the word carry out regular surveys with the aim of monitoring the stocks of commercial species. These surveys comprise often more than one hundred of sampling stations and cover large geographical areas. Although superficial sediment grain sizes are among the main drivers of benthic communities and provide crucial information for studies on coastal dynamics, overall there is a strong lack of this type of data, possibly, because traditional surface sediment sampling methods use grabs, that require considerable time and effort to be carried out on regular basis or on large areas. In face of these aspects, we developed an easy and un-expensive method to sample superficial sediments, during bivalve fisheries monitoring surveys, without increasing survey time or human resources. The method was successfully evaluated and validated during a typical bivalve survey carried out on the Northwest coast of Portugal, confirming that it had any interference with the survey objectives. Furthermore, the method was validated by collecting samples using a traditional Van Veen grabs (traditional method), which showed a similar grain size composition to the ones collected by the new method, on the same localities. We recommend that the procedure is implemented on regular bivalve fishing surveys, together with an image analysis system to analyse the collected samples. The new method will provide substantial quantity of data on surface sediment in coastal areas, using a non-expensive and efficient manner, with a high potential application in different fields of research.

  9. Geostatistical integration and uncertainty in pollutant concentration surface under preferential sampling

    Directory of Open Access Journals (Sweden)

    Laura Grisotto

    2016-04-01

    Full Text Available In this paper the focus is on environmental statistics, with the aim of estimating the concentration surface and related uncertainty of an air pollutant. We used air quality data recorded by a network of monitoring stations within a Bayesian framework to overcome difficulties in accounting for prediction uncertainty and to integrate information provided by deterministic models based on emissions meteorology and chemico-physical characteristics of the atmosphere. Several authors have proposed such integration, but all the proposed approaches rely on representativeness and completeness of existing air pollution monitoring networks. We considered the situation in which the spatial process of interest and the sampling locations are not independent. This is known in the literature as the preferential sampling problem, which if ignored in the analysis, can bias geostatistical inferences. We developed a Bayesian geostatistical model to account for preferential sampling with the main interest in statistical integration and uncertainty. We used PM10 data arising from the air quality network of the Environmental Protection Agency of Lombardy Region (Italy and numerical outputs from the deterministic model. We specified an inhomogeneous Poisson process for the sampling locations intensities and a shared spatial random component model for the dependence between the spatial location of monitors and the pollution surface. We found greater predicted standard deviation differences in areas not properly covered by the air quality network. In conclusion, in this context inferences on prediction uncertainty may be misleading when geostatistical modelling does not take into account preferential sampling.

  10. TRITIUM UNCERTAINTY ANALYSIS FOR SURFACE WATER SAMPLES AT THE SAVANNAH RIVER SITE

    Energy Technology Data Exchange (ETDEWEB)

    Atkinson, R.

    2012-07-31

    Radiochemical analyses of surface water samples, in the framework of Environmental Monitoring, have associated uncertainties for the radioisotopic results reported. These uncertainty analyses pertain to the tritium results from surface water samples collected at five locations on the Savannah River near the U.S. Department of Energy's Savannah River Site (SRS). Uncertainties can result from the field-sampling routine, can be incurred during transport due to the physical properties of the sample, from equipment limitations, and from the measurement instrumentation used. The uncertainty reported by the SRS in their Annual Site Environmental Report currently considers only the counting uncertainty in the measurements, which is the standard reporting protocol for radioanalytical chemistry results. The focus of this work is to provide an overview of all uncertainty components associated with SRS tritium measurements, estimate the total uncertainty according to ISO 17025, and to propose additional experiments to verify some of the estimated uncertainties. The main uncertainty components discovered and investigated in this paper are tritium absorption or desorption in the sample container, HTO/H{sub 2}O isotopic effect during distillation, pipette volume, and tritium standard uncertainty. The goal is to quantify these uncertainties and to establish a combined uncertainty in order to increase the scientific depth of the SRS Annual Site Environmental Report.

  11. Atmospheric pressure surface sampling/ionization techniques for direct coupling of planar separations with mass spectrometry.

    Science.gov (United States)

    Pasilis, Sofie P; Van Berkel, Gary J

    2010-06-18

    Planar separations, which include thin layer chromatography and gel electrophoresis, are in widespread use as important and powerful tools for conducting separations of complex mixtures. To increase the utility of planar separations, new methods are needed that allow in situ characterization of the individual components of the separated mixtures. A large number of atmospheric pressure surface sampling and ionization techniques for use with mass spectrometry have emerged in the past several years, and several have been investigated as a means for mass spectrometric read-out of planar separations. In this article, we review the atmospheric pressure surface sampling and ionization techniques that have been used for the read-out of planar separation media. For each technique, we briefly explain the operational basics and discuss the analyte type for which it is appropriate and some specific applications from the literature. Copyright (c) 2010 Elsevier B.V. All rights reserved.

  12. Laser pulse transient method for measuring the normal spectral emissivity of samples with arbitrary surface quality

    Science.gov (United States)

    Jeromen, A.; Grabec, I.; Govekar, E.

    2008-09-01

    A laser pulse transient method for measuring normal spectral emissivity is described. In this method, a laser pulse ( λ=1064 nm) irradiates the top surface of a flat specimen. A two-dimensional temperature response of the bottom surface is measured with a calibrated thermographic camera. By solving an axisymmetric boundary value heat conduction problem, the normal spectral emissivity at 1064 nm is determined by using an iterative nonlinear least-squares estimation procedure. The method can be applied to arbitrary sample surface quality. The method is tested on a nickel specimen and used to determine the normal spectral emissivity of AISI 304 stainless steel. The expanded combined uncertainty of the method has been estimated to be 18%.

  13. Surface plasmon resonance biosensor for detection of pregnancy associated plasma protein A2 in clinical samples

    Czech Academy of Sciences Publication Activity Database

    Bocková, Markéta; Chadtová Song, Xue; Gedeonová, Erika; Levová, K.; Kalousová, M.; Zima, T.; Homola, Jiří

    2016-01-01

    Roč. 408, č. 26 (2016), s. 7265-7269 ISSN 1618-2642 R&D Projects: GA ČR(CZ) GBP205/12/G118 Grant - others:AV ČR(CZ) AP1101 Program:Akademická prémie - Praemium Academiae Institutional support: RVO:67985882 Keywords : Nanoparticles * Blood sample * Surface plasmon resonance Subject RIV: BO - Biophysics Impact factor: 3.431, year: 2016

  14. Surface plasmon resonance: advances of label-free approaches in the analysis of biological samples

    Czech Academy of Sciences Publication Activity Database

    Riedel, Tomáš; Majek, P.; Rodriguez-Emmenegger, Cesar; Brynda, Eduard

    2014-01-01

    Roč. 6, č. 24 (2014), s. 3325-3336 ISSN 1757-6180 R&D Projects: GA ČR(CZ) GBP205/12/G118; GA MŠk(CZ) EE2.3.30.0029; GA MŠk(CZ) ED1.1.00/02.0109 Institutional support: RVO:61389013 Keywords : surface plasmon resonance sensors * polymer brushes * human serum samples Subject RIV: CE - Biochemistry Impact factor: 3.003, year: 2014

  15. Molecular Characterization of Cryptosporidium Oocysts in Samples of Raw Surface Water and Wastewater

    OpenAIRE

    Xiao, Lihua; Singh, Ajaib; Limor, Josef; Graczyk, Thaddeus K.; Gradus, Steve; Lal, Altaf

    2001-01-01

    Recent molecular characterizations of Cryptosporidium parasites make it possible to differentiate the human-pathogenic Cryptosporidium parasites from those that do not infect humans and to track the source of Cryptosporidium oocyst contamination in the environment. In this study, we used a small-subunit rRNA-based PCR-restriction fragment length polymorphism (RFLP) technique to detect and characterize Cryptosporidium oocysts in 55 samples of raw surface water collected from several areas in t...

  16. Sampling and Low-Rank Tensor Approximation of the Response Surface

    KAUST Repository

    Litvinenko, Alexander

    2013-01-01

    Most (quasi)-Monte Carlo procedures can be seen as computing some integral over an often high-dimensional domain. If the integrand is expensive to evaluate-we are thinking of a stochastic PDE (SPDE) where the coefficients are random fields and the integrand is some functional of the PDE-solution-there is the desire to keep all the samples for possible later computations of similar integrals. This obviously means a lot of data. To keep the storage demands low, and to allow evaluation of the integrand at points which were not sampled, we construct a low-rank tensor approximation of the integrand over the whole integration domain. This can also be viewed as a representation in some problem-dependent basis which allows a sparse representation. What one obtains is sometimes called a "surrogate" or "proxy" model, or a "response surface". This representation is built step by step or sample by sample, and can already be used for each new sample. In case we are sampling a solution of an SPDE, this allows us to reduce the number of necessary samples, namely in case the solution is already well-represented by the low-rank tensor approximation. This can be easily checked by evaluating the residuum of the PDE with the approximate solution. The procedure will be demonstrated in the computation of a compressible transonic Reynolds-averaged Navier-Strokes flow around an airfoil with random/uncertain data. © Springer-Verlag Berlin Heidelberg 2013.

  17. Pollen Image Recognition Based on DGDB-LBP Descriptor

    Science.gov (United States)

    Han, L. P.; Xie, Y. H.

    2018-01-01

    In this paper, we propose DGDB-LBP, a local binary pattern descriptor based on the pixel blocks in the dominant gradient direction. Differing from traditional LBP and its variants, DGDB-LBP encodes by comparing the main gradient magnitude of each block rather than the single pixel value or the average of pixel blocks, in doing so, it reduces the influence of noise on pollen images and eliminates redundant and non-informative features. In order to fully describe the texture features of pollen images and analyze it under multi-scales, we propose a new sampling strategy, which uses three types of operators to extract the radial, angular and multiple texture features under different scales. Considering that the pollen images have some degree of rotation under the microscope, we propose the adaptive encoding direction, which is determined by the texture distribution of local region. Experimental results on the Pollenmonitor dataset show that the average correct recognition rate of our method is superior to other pollen recognition methods in recent years.

  18. Variations of airborne winter pollen in southern Spain.

    Science.gov (United States)

    Ruiz de Clavijo, E; Galán, C; Infante, F; Domínguez, E

    1988-01-01

    This work deals with the variation in the atmosphere of the airborne pollen produced by winter blooming plants and is aimed to establish correlations between the concentration of pollen grains in the atmosphere of Córdoba and meteorological parameters such as the temperature, humidity, rainfall, pressure, hours of sunlight and wind speed and direction. The work was conducted for two consecutive years (1981-82 and 1982-83). The sampling was carried out in Córdoba (Spain) with a BURKARD sporetrap. The data obtained in the aeropalinological study are correlated to the above-mentioned meterological parameters. Along the period investigated grains were found from Ulmus minor, Fraxinus sp., Populus sp., Alnus glutinosa and Cupressaceae, and less frequently, Artemisia sp., Pinaceae, Urticaceae, type Helianthus and Gramineae. Pollen grains from Cupressaceae were found at the highest absolute and relative concentrations in the atmosphere of Córdoba during the winter, where they occurred almost throughout. The correlation analysis applied showed that the parameters most markedly influencing the grain concentration of most taxa were the temperature and humidity. Alnus glutinosa was the least affected species, probably because of the scarcity of its pollen grains.

  19. Infrared surface analysis using a newly developed thin-sample preparation system.

    Science.gov (United States)

    Nagai, Naoto; Nishiyama, Itsuo; Kishima, Yoshio; Iida, Katsuhiko; Mori, Koichi

    2009-01-01

    We developed a new sampling system, the Nano Catcher, for measuring the surface chemical structure of polymers or industrial products and we evaluated the performance of the system. The system can directly pick up surface species whose depth is on the order of approximately 100 nm and can easily provide a sample for a Fourier transform infrared (FT-IR) system without the necessity of passing it over to a measurement plate. The FT-IR reflection data obtained from the Nano Catcher were compared with those obtained using the attenuated total reflection (ATR) method and sampling by hand. Chemical structural analysis of a depth region from a few tens of nanometers to a few hundred nanometers can be directly performed using this system. Such depths are beyond the scope of conventional X-ray photoelectron spectroscopy (XPS) and ATR methods. We can expect the use of the Nano Catcher system to lead to a great improvement in the detection of signals of surface species in these depth regions.

  20. PRISM hepatitis B surface antigen detection of hepatits B virus minipool nucleic acid testing yield samples.

    Science.gov (United States)

    Linauts, Sandy; Saldanha, John; Strong, D Michael

    2008-07-01

    Hepatitis B virus (HBV) residual risk has been estimated at 1:63,000-1:205,000 and introduction of more sensitive serological tests and nucleic acid testing (NAT) would reduce that risk. Sensitivity of the recently licensed Abbott PRISM hepatitis B surface antigen (HBsAg) CLIA and minipool (MP) HBV NAT has been described as comparable and thus the need for HBV NAT has not been compelling. In this study, eight samples identified as yield samples with MP HBV NAT were tested using the PRISM test. Seven samples were identified using the Roche COBAS AmpliScreen HBV test and one additional sample was obtained from the clinical trial for the Roche cobas TaqScreen MPX test. Each of these samples was reactive by MP HBV NAT and nonreactive for HBsAg using one of three licensed enzyme immunoassay (EIA) tests. After licensure of the PRISM HBsAg, aliquots were tested with this assay, and DNA quantitation and genotyping were repeated where sample volume permitted. Three samples (2000, 2300, and 61,000 copies/mL) produced reactive results with PRISM. Four samples with viral loads less than 300 copies per mL produced nonreactive results. One sample, originally quantitated at 37,000 copies per mL (but 3850 copies/mL in repeat testing) was also nonreactive by PRISM. Genotyping of this sample indicated a type C genotype with no mutations. Adding serological sensitivity of PRISM CLIA reduced the NAT yield from the original 1: 385,555 to 1:610,488. However, MP HBV NAT still provides additional sensitivity over CLIA, even for a donation with a viral load of almost 4000 copies per mL.

  1. Pollen analysis of the post-emergence residue of Melipona (Melikerria interrupta Latreille (Hymenoptera: Apidae bred in the central Amazon region

    Directory of Open Access Journals (Sweden)

    Marcos Gonçalves Ferreira

    2013-12-01

    Full Text Available We applied an "adapted" protocol for collecting and processing pollen grains in the pollen analysis of the post-emergence residue of Melipona (Melikerria interrupta Latreille. The study was conducted at the Sant'Ana honey farm, located on the banks of the Solimões River, in the municipality of Manacapuru, in the state of Amazonas, Brazil, where a colony was monitored in October and November 2010. From that colony, 10 samples of post-emergence residue were collected. Unlike in the acetolysis method, there was no need to expose pollen grains to an acidic medium, because pollen loses its content during the larval digestive process. We identified 32 pollen types, from 19 botanical families, plus three undetermined pollen types. The most representative family was Fabaceae (Mimosoideae, with eight pollen types, Mimosa guilandinae being the most common species. Only the pollen of Miconia (Melastomataceae, with 74.10%, was classified as a common pollen. We also found that the pollen of Mimosa pudica (Fabaceae: Mimosoideae retained its content, indicating that not all resources furnished by workers are utilized by the larvae. The protocol applied here, despite omitting the acetolysis process, was efficient, providing full details of pollen contained in post-emergence residue.

  2. The coexistence of bicellular and tricellular pollen in Annona cherimola (Annonaceae): Implications for pollen evolution

    OpenAIRE

    Lora, Jorge; Herrero Romero, María; Hormaza Urroz, José Ignacio

    2009-01-01

    Most angiosperms release bicellular pollen. However, in about one-third of extant angiosperms, the second pollen mitosis occurs before anthesis such that pollen is tricellular upon release. The shift from bicellular to tricellular development has occurred several times independently, but its causes are largely unknown. In this work, we observed the coexistence of both kinds of pollen at anther dehiscence in Annona cherimola, a species that belongs to the basal angiosperm family Annonaceae. Ex...

  3. Bee pollen as non-wood forest product in the eastern Andean highlands of Colombia

    Directory of Open Access Journals (Sweden)

    Fermín José Chamorro García

    2013-07-01

    Full Text Available The Andean forests of the Eastern Andean high-lands of Colombia have a high conservation priority given the vulnerable condition of species such as Quercus humboldtii (Fagaceae that inhabit these ecosystems. Beekeeping is regarded as an alternative activity that could play a role in the conservation of Andean forests, but little is known about how the floras of these ecosystems contribute to honey and bee pollen production. We analyzed the contribution of Andean forests to bee pollen production, given the productive potential and commercial importance of this product. Pollen analyses were performed on 25 samples from apiaries near Andean forests located in the states of Cundinamarca, Boyacá and Santander. We found that Q. humboldtii is an important source of pollen with high potential for monofloral bee pollen production. In addition, bees collect pollen from other Andean forests species such as Weinmannia tomentosa, Viburnum spp. and Morella spp. Utilization of bee pollen could lead to incentives to carry out forest conservation practices through beekeeping management.

  4. Applying pollen DNA metabarcoding to the study of plant-pollinator interactions.

    Science.gov (United States)

    Bell, Karen L; Fowler, Julie; Burgess, Kevin S; Dobbs, Emily K; Gruenewald, David; Lawley, Brice; Morozumi, Connor; Brosi, Berry J

    2017-06-01

    To study pollination networks in a changing environment, we need accurate, high-throughput methods. Previous studies have shown that more highly resolved networks can be constructed by studying pollen loads taken from bees, relative to field observations. DNA metabarcoding potentially allows for faster and finer-scale taxonomic resolution of pollen compared to traditional approaches (e.g., light microscopy), but has not been applied to pollination networks. We sampled pollen from 38 bee species collected in Florida from sites differing in forest management. We isolated DNA from pollen mixtures and sequenced rbcL and ITS2 gene regions from all mixtures in a single run on the Illumina MiSeq platform. We identified species from sequence data using comprehensive rbcL and ITS2 databases. We successfully built a proof-of-concept quantitative pollination network using pollen metabarcoding. Our work underscores that pollen metabarcoding is not quantitative but that quantitative networks can be constructed based on the number of interacting individuals. Due to the frequency of contamination and false positive reads, isolation and PCR negative controls should be used in every reaction. DNA metabarcoding has advantages in efficiency and resolution over microscopic identification of pollen, and we expect that it will have broad utility for future studies of plant-pollinator interactions.

  5. Analysis of airborne ragweed (Ambrosia artemisiifolia L. pollen in Timisoara, 2004

    Directory of Open Access Journals (Sweden)

    Nicoleta IANOVICI

    2007-05-01

    Full Text Available Ambrosia artemisiifolia (ragweed is an annual, herbaceous, with high invasive potential, wind-pollinated plant that is important allergenic weed belonging to the Asteraceae plant family. Allergenic airpollen can interact with other components of environmental global change in a synergic way increasing the risks to public health. Analysis of the pollen count was performed on the basis of the data collected in Timişoara in the season of 2004. Airborne ragweed pollen concentrations, measured continuously with a volumetric method are compared with respect to both their quantitative and seasonal aspects. A weekly programmed Hirst spore-trap was used to sample airborne pollen grains, calibrated to handle a flow of 10 L/min of air, which roughly corresponds to a human breathing rhythm. In Timisoara the Lanzoni model was used. The daily quantities of pollen are expressed as numbers of pollen grains per cubic meter of air per day (PG/m3.The pollen seasons show 3 main parts: tree season (February–April, grass season (May–July, weed season (July–October. In September 65,71% of the total aeropollen concentration is due to Ambrosia. The highest concentration of ragweed pollen was 220 PG/m3.Ambrosia artemisiifolia have a pronounced invasive character. Since 1910, having been spread all over the country, it has become the most common weed in Romania. There is an urgent need to organize interventions to stop ragweed expansion and to clear the areas already polluted.

  6. Sampling

    CERN Document Server

    Thompson, Steven K

    2012-01-01

    Praise for the Second Edition "This book has never had a competitor. It is the only book that takes a broad approach to sampling . . . any good personal statistics library should include a copy of this book." —Technometrics "Well-written . . . an excellent book on an important subject. Highly recommended." —Choice "An ideal reference for scientific researchers and other professionals who use sampling." —Zentralblatt Math Features new developments in the field combined with all aspects of obtaining, interpreting, and using sample data Sampling provides an up-to-date treat

  7. Comparison of Surface Sampling Methods for Virus Recovery from Fomites ▿ †

    Science.gov (United States)

    Julian, Timothy R.; Tamayo, Francisco J.; Leckie, James O.; Boehm, Alexandria B.

    2011-01-01

    The role of fomites in infectious disease transmission relative to other exposure routes is difficult to discern due, in part, to the lack of information on the level and distribution of virus contamination on surfaces. Comparisons of studies intending to fill this gap are difficult because multiple different sampling methods are employed and authors rarely report their method's lower limit of detection. In the present study, we compare a subset of sampling methods identified from a literature review to demonstrate that sampling method significantly influences study outcomes. We then compare a subset of methods identified from the review to determine the most efficient methods for recovering virus from surfaces in a laboratory trial using MS2 bacteriophage as a model virus. Recoveries of infective MS2 and MS2 RNA are determined using both a plaque assay and quantitative reverse transcription-PCR, respectively. We conclude that the method that most effectively recovers virus from nonporous fomites uses polyester-tipped swabs prewetted in either one-quarter-strength Ringer's solution or saline solution. This method recovers a median fraction for infective MS2 of 0.40 and for MS2 RNA of 0.07. Use of the proposed method for virus recovery in future fomite sampling studies would provide opportunities to compare findings across multiple studies. PMID:21821742

  8. Peptide signalling during the pollen tube journey and double fertilization.

    Science.gov (United States)

    Qu, Li-Jia; Li, Ling; Lan, Zijun; Dresselhaus, Thomas

    2015-08-01

    Flowering seed plants (angiosperms) have evolved unique ways to protect their gametes from pathogen attack and from drying out. The female gametes (egg and central cell) are deeply embedded in the maternal tissues of the ovule inside the ovary, while the male gametes (sperm cells) are enclosed in the vegetative pollen tube cell. After germination of the pollen tube at the surface of papilla cells of the stigma the two immobile sperm cells are transported deep inside the sporophytic maternal tissues to be released inside the ovule for double fertilization. Angiosperms have evolved a number of hurdles along the pollen tube journey to prevent inbreeding and fertilization by alien sperm cells, and to maximize reproductive success. These pre-zygotic hybridization barriers require intensive communication between the male and female reproductive cells and the necessity to distinguish self from non-self interaction partners. General molecules such as nitric oxide (NO) or gamma-aminobutyric acid (GABA) therefore appear to play only a minor role in these species-specific communication events. The past 20 years have shown that highly polymorphic peptides play a leading role in all communication steps along the pollen tube pathway and fertilization. Here we review our current understanding of the role of peptides during reproduction with a focus on peptide signalling during self-incompatibility, pollen tube growth and guidance as well as sperm reception and gamete activation. © The Author 2015. Published by Oxford University Press on behalf of the Society for Experimental Biology. All rights reserved. For permissions, please email: journals.permissions@oup.com.

  9. In Vitro Pollen Viability and Pollen Germination in Cherry Laurel (Prunus laurocerasus L.

    Directory of Open Access Journals (Sweden)

    Melekber Sulusoglu

    2014-01-01

    Full Text Available Pollen quality is important for growers and breeders. This study was carried out to determine in vitro pollen viability and pollen germination in seven genotypes of cherry laurel (Prunus laurocerasus L.. Two pollen viability tests, TTC (2,3,5-triphenyl tetrazolium chloride and IKI (iodine potassium iodide, were used. Pollen traits of genotypes were studied using an in vitro medium containing 0%, 5%, 10%, 15%, and 20% sucrose to determine the best sucrose concentrations for germination. In the second step, the germinated pollen was counted 1, 4, 6, 10, 12, 24, and 48 hours later until there was no further germination. The viability rates were different according to genotypes and tests used. The IKI and TTC staining tests and pollen germination had low correlation (r2 = 0.0614 and r2 = 0.0015, resp.. Painted pollen rate was higher and pollen was well-stained with IKI test and pollen viability estimated with TTC staining test was better than that estimated with the IKI staining test. 15% sucrose gave the best germination rates in most of the genotypes. Pollen germination rates were recorded periodically from one hour to 48 hours in 15% sucrose and the results showed that pollen germination rates increased after 6 hours of being placed in culture media.

  10. In vitro pollen viability and pollen germination in cherry laurel (Prunus laurocerasus L.).

    Science.gov (United States)

    Sulusoglu, Melekber; Cavusoglu, Aysun

    2014-01-01

    Pollen quality is important for growers and breeders. This study was carried out to determine in vitro pollen viability and pollen germination in seven genotypes of cherry laurel (Prunus laurocerasus L.). Two pollen viability tests, TTC (2,3,5-triphenyl tetrazolium chloride) and IKI (iodine potassium iodide), were used. Pollen traits of genotypes were studied using an in vitro medium containing 0%, 5%, 10%, 15%, and 20% sucrose to determine the best sucrose concentrations for germination. In the second step, the germinated pollen was counted 1, 4, 6, 10, 12, 24, and 48 hours later until there was no further germination. The viability rates were different according to genotypes and tests used. The IKI and TTC staining tests and pollen germination had low correlation (r(2) = 0.0614 and r(2) = 0.0015, resp.). Painted pollen rate was higher and pollen was well-stained with IKI test and pollen viability estimated with TTC staining test was better than that estimated with the IKI staining test. 15% sucrose gave the best germination rates in most of the genotypes. Pollen germination rates were recorded periodically from one hour to 48 hours in 15% sucrose and the results showed that pollen germination rates increased after 6 hours of being placed in culture media.

  11. Novel production method of porous surface Ti samples for biomedical application.

    Science.gov (United States)

    de Vasconcellos, Luana Marotta Reis; Oliveira, Fernanda Nascimento; Leite, Daniel de Oliveira; de Vasconcellos, Luis Gustavo Oliveira; do Prado, Renata Falchete; Ramos, Carolina Judica; Graça, Mário Lima de Alencastro; Cairo, Carlos Alberto Alves; Carvalho, Yasmin Rodarte

    2012-02-01

    A porous implant material with adequate pore structure and the appropriate mechanical properties for bone ingrowth has long been sought. This article presents details of the development, characterization and in vivo evaluations of powder metallurgy-processed titanium samples exhibiting a dense core with an integrated porous surface for biomedical applications. A space-holder method was applied to investigate the effects of different percentages and particle sizes of the urea on bone neoformation in 30 rabbits. The samples were previously characterized using scanning electron microscopy and mechanical testing. After 8 and 12 weeks of implantation, bone ingrowth was histologically and histometrically analyzed and push-out testing was performed. This study demonstrated that the association of a dense core integrated with the greatest number of interconnected pores of the smallest size is a promising biomaterial for bone tissue engineering. This sample exhibits appropriate mechanical properties combined with increased bone ingrowth, providing enhanced resistance to displacement.

  12. In-Situ XRF Measurements in Lunar Surface Exploration Using Apollo Samples as a Standard

    Science.gov (United States)

    Young, Kelsey E.; Evans, C.; Allen, C.; Mosie, A.; Hodges, K. V.

    2011-01-01

    Samples collected during the Apollo lunar surface missions were sampled and returned to Earth by astronauts with varying degrees of geological experience. The technology used in these EVAs, or extravehicular activities, included nothing more advanced than traditional terrestrial field instruments: rock hammer, scoop, claw tool, and sample bags. 40 years after Apollo, technology is being developed that will allow for a high-resolution geochemical map to be created in the field real-time. Handheld x-ray fluorescence (XRF) technology is one such technology. We use handheld XRF to enable a broad in-situ characterization of a geologic site of interest based on fairly rapid techniques that can be implemented by either an astronaut or a robotic explorer. The handheld XRF instrument we used for this study was the Innov-X Systems Delta XRF spectrometer.

  13. Controlling Hay Fever Symptoms with Accurate Pollen Counts

    Science.gov (United States)

    ... Hay fever and pollen counts Share | Controlling Hay Fever Symptoms with Accurate Pollen Counts This article has ... MD, FAAAAI Seasonal allergic rhinitis known as hay fever is caused by pollen carried in the air ...

  14. Experimental studies on mushroom and pollen drying

    Energy Technology Data Exchange (ETDEWEB)

    Midilli, Adnan; Olgun, Hayati; Ayhan, Teoman [Karadeniz Technical Univ., Mechanical Engineering Dept., Trabzon (Turkey)

    1999-07-01

    In this study, drying periods of mushrooms and pollens (for Anzer honey) were investigated. The experiments of mushrooms were carried out under both laboratory and shady- and sunny-atmospheric conditions and those of pollens were conducted in the drying cupboard heated by electric heater and under sunny atmospheric conditions. The temperature of the drying cupboard was regulated at 45degC during the drying experiment of pollen. The mass loss of pollens and the temperature of each shelf including pollens in the drying cupboard were measured. Drying curves of mushrooms and pollens for each experiment and the variation of the mass change ratio, the moisture ratio of pollens and the temperatures in the shelves with drying time were presented, respectively. Furthermore, their equations of drying curves and the average experimental uncertainty ratios were calculated based on the experimental results. It was concluded that mushrooms can be dried in the cupboards by using hot air at 50degC in a time period of 5-6 h, and the dried must be protected in vacuum, and the pollens also must be dried at temperatures between 40 and 45degC in a time period of 2.5-3 h without their losing the colour, flavour, smell and structure. The average experimental uncertainty ratio of mushrooms and pollens during the drying process were calculated to be 22 and 18% respectively. (Author)

  15. Automated DNA extraction from pollen in honey.

    Science.gov (United States)

    Guertler, Patrick; Eicheldinger, Adelina; Muschler, Paul; Goerlich, Ottmar; Busch, Ulrich

    2014-04-15

    In recent years, honey has become subject of DNA analysis due to potential risks evoked by microorganisms, allergens or genetically modified organisms. However, so far, only a few DNA extraction procedures are available, mostly time-consuming and laborious. Therefore, we developed an automated DNA extraction method from pollen in honey based on a CTAB buffer-based DNA extraction using the Maxwell 16 instrument and the Maxwell 16 FFS Nucleic Acid Extraction System, Custom-Kit. We altered several components and extraction parameters and compared the optimised method with a manual CTAB buffer-based DNA isolation method. The automated DNA extraction was faster and resulted in higher DNA yield and sufficient DNA purity. Real-time PCR results obtained after automated DNA extraction are comparable to results after manual DNA extraction. No PCR inhibition was observed. The applicability of this method was further successfully confirmed by analysis of different routine honey samples. Copyright © 2013 Elsevier Ltd. All rights reserved.

  16. Sampling problems and the determination of mercury in surface water, seawater, and air

    International Nuclear Information System (INIS)

    Das, H.A.; van der Sloot, H.A.

    1976-01-01

    Analysis of surface water for mercury comprises the determination of both ionic and organically bound mercury in solution and that of the total mercury content of the suspended matter. Eventually, metallic mercury has to be determined too. Requirements for the sampling procedure are given. A method for the routine determination of mercury in surface water and seawater was developed and applied to Dutch surface waters. The total sample volume is 2500 ml. About 500 ml is used for the determination of the content of suspended matter and the total amount of mercury in the water. The sample is filtered through a bed of previously purified active charcoal at a low flow-rate. The main portion ca. 2000 ml) passes a flow-through centrifuge to separate the solid fraction. One liter is used to separate ''inorganic'' mercury by reduction, volatilization in an airstream and adsorption on active charcoal. The other liter is led through a column of active charcoal to collect all mercury. The procedures were checked with 197 Hg radiotracer both as an ion and incorporated in organic compounds. The mercury is determined by thermal neutron activation, followed by volatilization in a tube furnace and adsorption on a fresh carbon bed. The limit of determination is approximately equal to 1 ng 1 -1 . The rate of desorption from and adsorption on suspended material has been measured as a function of a pH of the solution for Hg +2 and various other ions. It can be concluded that only the procedure mentioned above does not disturb the equilibrium. The separation of mercury from air is obtained by suction of 1 m 3 through a 0.22 μm filter and a charcoal bed. The determination is then performed as in the case of the water samples

  17. Surface plasmon resonance biosensors for highly sensitive detection in real samples

    Science.gov (United States)

    Sepúlveda, B.; Carrascosa, L. G.; Regatos, D.; Otte, M. A.; Fariña, D.; Lechuga, L. M.

    2009-08-01

    In this work we summarize the main results obtained with the portable surface plasmon resonance (SPR) device developed in our group (commercialised by SENSIA, SL, Spain), highlighting its applicability for the real-time detection of extremely low concentrations of toxic pesticides in environmental water samples. In addition, we show applications in clinical diagnosis as, on the one hand, the real-time and label-free detection of DNA hybridization and single point mutations at the gene BRCA-1, related to the predisposition in women to develop an inherited breast cancer and, on the other hand, the analysis of protein biomarkers in biological samples (urine, serum) for early detection of diseases. Despite the large number of applications already proven, the SPR technology has two main drawbacks: (i) not enough sensitivity for some specific applications (where pM-fM or single-molecule detection are needed) (ii) low multiplexing capabilities. In order solve such drawbacks, we work in several alternative configurations as the Magneto-optical Surface Plasmon Resonance sensor (MOSPR) based on a combination of magnetooptical and ferromagnetic materials, to improve the SPR sensitivity, or the Localized Surface Plasmon Resonance (LSPR) based on nanostructures (nanoparticles, nanoholes,...), for higher multiplexing capabilities.

  18. Microjetting from grooved surfaces in metallic samples subjected to laser driven shocks

    Energy Technology Data Exchange (ETDEWEB)

    Rességuier, T. de, E-mail: resseguier@ensma.fr [Institut PPRIME, UPR 3346, CNRS, ENSMA, Université de Poitiers, 1 ave. Clément Ader, 86961 Futuroscope Cedex (France); Lescoute, E.; Sollier, A.; Prudhomme, G.; Mercier, P. [CEA, DAM, DIF, 91297 Arpajon (France)

    2014-01-28

    When a shock wave propagating in a solid sample reflects from a free surface, geometrical effects predominantly governed by the roughness and defects of that surface may lead to the ejection of tiny jets that may breakup into high velocity, approximately micrometer-size fragments. This process referred to as microjetting is a major safety issue for engineering applications such as pyrotechnics or armour design. Thus, it has been widely studied both experimentally, under explosive and impact loading, and theoretically. In this paper, microjetting is investigated in the specific loading conditions associated to laser shocks: very short duration of pressure application, very high strain rates, small spatial scales. Material ejection from triangular grooves in the free surface of various metallic samples is studied by combining transverse optical shadowgraphy and time-resolved velocity measurements. The influences of the main parameters (groove angle, shock pressure, nature of the metal) on jet formation and ejection velocity are quantified, and the results are compared to theoretical estimates.

  19. Microjetting from grooved surfaces in metallic samples subjected to laser driven shocks

    Science.gov (United States)

    de Rességuier, T.; Lescoute, E.; Sollier, A.; Prudhomme, G.; Mercier, P.

    2014-01-01

    When a shock wave propagating in a solid sample reflects from a free surface, geometrical effects predominantly governed by the roughness and defects of that surface may lead to the ejection of tiny jets that may breakup into high velocity, approximately micrometer-size fragments. This process referred to as microjetting is a major safety issue for engineering applications such as pyrotechnics or armour design. Thus, it has been widely studied both experimentally, under explosive and impact loading, and theoretically. In this paper, microjetting is investigated in the specific loading conditions associated to laser shocks: very short duration of pressure application, very high strain rates, small spatial scales. Material ejection from triangular grooves in the free surface of various metallic samples is studied by combining transverse optical shadowgraphy and time-resolved velocity measurements. The influences of the main parameters (groove angle, shock pressure, nature of the metal) on jet formation and ejection velocity are quantified, and the results are compared to theoretical estimates.

  20. Microjetting from grooved surfaces in metallic samples subjected to laser driven shocks

    International Nuclear Information System (INIS)

    Rességuier, T. de; Lescoute, E.; Sollier, A.; Prudhomme, G.; Mercier, P.

    2014-01-01

    When a shock wave propagating in a solid sample reflects from a free surface, geometrical effects predominantly governed by the roughness and defects of that surface may lead to the ejection of tiny jets that may breakup into high velocity, approximately micrometer-size fragments. This process referred to as microjetting is a major safety issue for engineering applications such as pyrotechnics or armour design. Thus, it has been widely studied both experimentally, under explosive and impact loading, and theoretically. In this paper, microjetting is investigated in the specific loading conditions associated to laser shocks: very short duration of pressure application, very high strain rates, small spatial scales. Material ejection from triangular grooves in the free surface of various metallic samples is studied by combining transverse optical shadowgraphy and time-resolved velocity measurements. The influences of the main parameters (groove angle, shock pressure, nature of the metal) on jet formation and ejection velocity are quantified, and the results are compared to theoretical estimates

  1. Anther development of maize (Zea mays) and longstamen rice (Oryza longistaminata) revealed by cryo-SEM, with foci on locular dehydration and pollen arrangement.

    Science.gov (United States)

    Tsou, Chih-Hua; Cheng, Ping-Chin; Tseng, Chiung-Maan; Yen, Hsiao-Jung; Fu, Yu-Lan; You, Tien-Rong; Walden, David B

    2015-03-01

    Key message: Pollen maturation in Poaceae. Another development has been extensively examined by various imaging tools, including transmission electron microscopy, scanning electron microscopy, and light microscopy, but none is capable of identifying liquid water. Cryo-scanning electron microscopy with high-pressure rapid freeze fixation is excellent in preserving structures at cellular level and differentiating gas- versus liquid-filled space, but rarely used in anther study. We applied this technique to examine anther development of Poaceae because of its economic importance and unusual peripheral arrangement of pollen. Maize and longstamen rice were focused on. Here, we report for the first time that anthers of Poaceae lose the locular free liquid during late-microspore to early pollen stages; the majority of pollen grains arranged in a tight peripheral whorl develops normally and reaches maturity in the gas-filled loculus. Occasionally, pollen grains are found situated in the locular cavity, but they remain immature or become shrunk at anthesis. At pollen stage, microchannels and cytoplasmic strands are densely distributed in the entire pollen exine and intine, respectively, suggesting that nutrients are transported into the pollen from the entire surface. We propose that in Poaceae, the specialized peripheral arrangement of pollen grains is crucial for pollen maturation in the gas-filled loculus, which enables pollen achieving large surface contact area with the tapetum and neighboring grains to maintain sufficient nutrient flow. This report also shows that the single aperture of pollen in Poaceae usually faces the tapetum, but other orientation is also common; pollen grains with different aperture orientations show no morphological differences.

  2. Cells of the connective tissue differentiate and migrate into pollen sacs

    Science.gov (United States)

    Iqbal, M. C. M.; Wijesekara, Kolitha B.

    2002-01-01

    In angiosperms, archesporial cells in the anther primordium undergo meiosis to form haploid pollen, the sole occupants of anther sacs. Anther sacs are held together by a matrix of parenchyma cells, the connective tissue. Cells of the connective tissue are not known to differentiate. We report the differentiation of parenchyma cells in the connective tissue of two Gordonia species into pollen-like structures (described as pseudopollen), which migrate into the anther sacs before dehiscence. Pollen and pseudopollen were distinguishable by morphology and staining. Pollen were tricolpate to spherical while pseudopollen were less rigid and transparent with a ribbed surface. Both types were different in size, shape, staining and surface architecture. The ratio of the number of pseudopollen to pollen was 1:3. During ontogeny in the connective tissue, neither cell division nor tetrad formation was observed and hence pseudopollen were presumed to be diploid. Only normal pollen germinated on a germination medium. Fixed preparations in time seemed to indicate that pseudopollen migrate from the connective tissue into the anther sac.

  3. An Automated Algorithm to Screen Massive Training Samples for a Global Impervious Surface Classification

    Science.gov (United States)

    Tan, Bin; Brown de Colstoun, Eric; Wolfe, Robert E.; Tilton, James C.; Huang, Chengquan; Smith, Sarah E.

    2012-01-01

    An algorithm is developed to automatically screen the outliers from massive training samples for Global Land Survey - Imperviousness Mapping Project (GLS-IMP). GLS-IMP is to produce a global 30 m spatial resolution impervious cover data set for years 2000 and 2010 based on the Landsat Global Land Survey (GLS) data set. This unprecedented high resolution impervious cover data set is not only significant to the urbanization studies but also desired by the global carbon, hydrology, and energy balance researches. A supervised classification method, regression tree, is applied in this project. A set of accurate training samples is the key to the supervised classifications. Here we developed the global scale training samples from 1 m or so resolution fine resolution satellite data (Quickbird and Worldview2), and then aggregate the fine resolution impervious cover map to 30 m resolution. In order to improve the classification accuracy, the training samples should be screened before used to train the regression tree. It is impossible to manually screen 30 m resolution training samples collected globally. For example, in Europe only, there are 174 training sites. The size of the sites ranges from 4.5 km by 4.5 km to 8.1 km by 3.6 km. The amount training samples are over six millions. Therefore, we develop this automated statistic based algorithm to screen the training samples in two levels: site and scene level. At the site level, all the training samples are divided to 10 groups according to the percentage of the impervious surface within a sample pixel. The samples following in each 10% forms one group. For each group, both univariate and multivariate outliers are detected and removed. Then the screen process escalates to the scene level. A similar screen process but with a looser threshold is applied on the scene level considering the possible variance due to the site difference. We do not perform the screen process across the scenes because the scenes might vary due to

  4. Direct protein quantification in complex sample solutions by surface-engineered nanorod probes

    KAUST Repository

    Schrittwieser, Stefan

    2017-06-30

    Detecting biomarkers from complex sample solutions is the key objective of molecular diagnostics. Being able to do so in a simple approach that does not require laborious sample preparation, sophisticated equipment and trained staff is vital for point-of-care applications. Here, we report on the specific detection of the breast cancer biomarker sHER2 directly from serum and saliva samples by a nanorod-based homogeneous biosensing approach, which is easy to operate as it only requires mixing of the samples with the nanorod probes. By careful nanorod surface engineering and homogeneous assay design, we demonstrate that the formation of a protein corona around the nanoparticles does not limit the applicability of our detection method, but on the contrary enables us to conduct in-situ reference measurements, thus further strengthening the point-of-care applicability of our method. Making use of sandwich assays on top of the nanorods, we obtain a limit of detection of 110 pM and 470 pM in 10-fold diluted spiked saliva and serum samples, respectively. In conclusion, our results open up numerous applications in direct protein biomarker quantification, specifically in point-of-care settings where resources are limited and ease-of-use is of essence.

  5. Fabrication of SERS Active Surface on Polyimide Sample by Excimer Laser Irradiation

    Directory of Open Access Journals (Sweden)

    T. Csizmadia

    2014-01-01

    Full Text Available A possible application of excimer laser irradiation for the preparation of surface enhanced Raman spectroscopy (SERS substrate is demonstrated. A polyimide foil of 125 μm thickness was irradiated by 240 pulses of focused ArF excimer laser beam (λ = 193 nm, FWHM = 20 ns. The applied fluence was varied between 40 and 80 mJ/cm2. After laser processing, the sample was coated with 40 nm silver by PLD in order to create a conducting layer required for the SERS application. The SERS activity of the samples was tested by Raman microscopy. The Raman spectra of Rhodamine 6G aqueous solution (c=10−3 mol/dm3 were collected from the patterned and metalized areas. For areas prepared at 40–60 mJ/cm2 laser fluences, the measured Raman intensities have shown a linear dependence on the applied laser fluence, while above 60 mJ/cm2 saturation was observed. The morphology of the SERS active surface areas was investigated by scanning electron microscopy. Finite element modeling was performed in order to simulate the laser-absorption induced heating of the polyimide foil. The simulation resulted in the temporal and spatial distribution of the estimated temperature in the irradiated polyimide sample, which are important for understanding the structure formation process.

  6. Aerodynamics and pollen ultrastructure in Ephedra.

    Science.gov (United States)

    Bolinder, Kristina; Niklas, Karl J; Rydin, Catarina

    2015-03-01

    Pollen dispersal is affected by the terminal settling velocity (Ut) of the grains, which is determined by their size, bulk density, and by atmospheric conditions. The likelihood that wind-dispersed pollen is captured by ovulate organs is influenced by the aerodynamic environment created around and by ovulate organs. We investigated pollen ultrastructure and Ut of Ephedra foeminea (purported to be entomophilous), and simulated the capture efficiency of its ovules. Results were compared with those from previously studied anemophilous Ephedra species.• Ut was determined using stroboscopic photography of pollen in free fall. The acceleration field around an "average" ovule was calculated, and inflight behavior of pollen grains was predicted using computer simulations. Pollen morphology and ultrastructure were investigated using SEM and STEM.• Pollen wall ultrastructure was correlated with Ut in Ephedra. The relative proportion and amount of granules in the infratectum determine pollen bulk densities, and (together with overall size) determine Ut and thus dispersal capability. Computer simulations failed to reveal any functional traits favoring anemophilous pollen capture in E. foeminea.• The fast Ut and dense ultrastructure of E. foeminea pollen are consistent with functional traits that distinguish entomophilous species from anemophilous species. In anemophilous Ephedra species, ovulate organs create an aerodynamic microenvironment that directs airborne pollen to the pollination drops. In E. foeminea, no such microenvironment is created. Ephedroid palynomorphs from the Cretaceous share the ultrastructural characteristics of E. foeminea, and at least some may, therefore, have been produced by insect-pollinated plants. © 2015 Botanical Society of America, Inc.

  7. De novo post-pollen mitosis II tobacco pollen tube transcriptome

    OpenAIRE

    Hafidh, S. (Said); Breznenová, K. (Katarína); Honys, D. (David)

    2012-01-01

    In our previous study we applied the Agilent 44K tobacco gene chip to introduce and analyze the tobacco male gametophyte transcriptome in mature pollen and 4h pollen tubes. Here we extended our analysis post-pollen mitosis II (PMII) by including a new data set obtained from more advanced stage of the ongoing progamic phase – pollen tubes cultivated in vitro for 24 h. Pollen mitosis II marks key events in the control of male gametophyte development, the production of two sperm cells. In bicell...

  8. Quantitative Caffeine Analysis Using a Surface Sampling Probe Electrospray Ionization Tandem Mass Spectrometry System

    Energy Technology Data Exchange (ETDEWEB)

    Ford, Michael J [ORNL; Deibel, Michael A. [Earlham College; Tomkins, Bruce A [ORNL; Van Berkel, Gary J [ORNL

    2005-01-01

    Quantitative determination of caffeine on reversed-phase C8 thin-layer chromatography plates using a surface sampling electrospray ionization system with tandem mass spectrometry detection is reported. The thin-layer chromatography/electrospray tandem mass spectrometry method employed a deuterium-labeled caffeine internal standard and selected reaction monitoring detection. Up to nine parallel caffeine bands on a single plate were sampled in a single surface scanning experiment requiring 35 min at a surface scan rate of 44 {mu}m/s. A reversed-phase HPLC/UV caffeine assay was developed in parallel to assess the mass spectrometry method performance. Limits of detection for the HPLC/UV and thin-layer chromatography/electrospray tandem mass spectrometry methods determined from the calibration curve statistics were 0.20 ng injected (0.50 {mu}L) and 1.0 ng spotted on the plate, respectively. Spike recoveries with standards and real samples ranged between 97 and 106% for both methods. The caffeine content of three diet soft drinks (Diet Coke, Diet Cherry Coke, Diet Pepsi) and three diet sport drinks (Diet Turbo Tea, Speed Stack Grape, Speed Stack Fruit Punch) was measured. The HPLC/UV and mass spectrometry determinations were in general agreement, and these values were consistent with the quoted values for two of the three diet colas. In the case of Diet Cherry Coke and the diet sports drinks, the determined caffeine amounts using both methods were consistently higher (by 8% or more) than the literature values.

  9. Pollination of Schisandra henryi (Schisandraceae) by Female, Pollen-eating Megommata Species (Cecidomyiidae, Diptera) in South-central China

    Science.gov (United States)

    Yuan, Liang-Chen; Luo, Yi-Bo; Thien, Leonard B.; Fan, Jian-Hua; Xu, Huan-Li; Chen, Zhi-Duan

    2007-01-01

    Background and Aims The mutualistic interaction between insects and flowers is considered to be a major factor in the early evolution of flowering plants. The Schisandraceae were, until now, the only family in the ANITA group lacking information on pollination biology in natural ecosystems. Thus, the objective of this research was to document the pollination biology and breeding system of Schisandra henryi. Methods Field observations were conducted in three populations of S. henryi and the floral phenology, floral characters and insect activities were recorded. Floral fragrances were sampled in the field and analysed using TCT-GC-MS. Floral thermogenesis was measured with a TR-71U Thermo Recorder. Pollen loads and location of pollen grains on insect bodies (including the gut) were checked with a scanning electron microscope and under a light microscope. Key Results Schisandra henryi is strictly dioecious. Male flowers are similar to female flowers in colour, shape, and size, but more abundant than female flowers. The distance between tepals and the androecium or gynoecium is narrow. Neither male nor female flowers are fragrant or thermogenic. Schisandra henryi is pollinated only by adult female Megommata sp. (Cecidomyiidae, Diptera) that eat the pollen grains as extra nutrition for ovary maturation and ovipositing. Both male and female flowers attract the pollinators using similar visual cues and thus the female flowers use deceit as they offer no food. Conclusions Schisandra henryi exhibits a specialized pollination system, which differs from the generalized pollination system documented in other ANITA members. Pollen is the sole food resource for Megommata sp. and the female flowers of S. henryi attract pollinators by deceit. This is the first report of predacious gall midges utilizing pollen grains as a food source. The lack of floral thermogenesis and floral odours further enforces the visual cues by reducing attractants for other potential pollinators. PMID

  10. The Martian surface as imaged, sampled, and analyzed by the Viking landers

    International Nuclear Information System (INIS)

    Arvidson, R.E.; Gooding, J.L.; Moore, H.J.

    1989-01-01

    Data collected by two Viking landers are analyzed. Attention is given to the characteristics of the surface inferred from Lander imaging and meteorology data, physical and magnetic properties experiments, and both inorganic and organic analyses of Martian samples. Viking Lander 1 touched down on Chryse Planitia on July 20, 1976 and continued to operate for 2252 sols, until November 20, 1982. Lander 2 touched down about 6500 km away from Lander 1, on Utopia Planitia on September 3, 1976. The chemical compositions of sediments at the two landing sites are similar, suggesting an aeolian origin. The compositions suggest an iron-rich rock an are matched by various clays and salts. 89 refs

  11. Spatial spectrograms of vibrating atomic force microscopy cantilevers coupled to sample surfaces

    International Nuclear Information System (INIS)

    Wagner, Ryan; Raman, Arvind; Proksch, Roger

    2013-01-01

    Many advanced dynamic Atomic Force Microscopy (AFM) techniques such as contact resonance, force modulation, piezoresponse force microscopy, electrochemical strain microscopy, and AFM infrared spectroscopy exploit the dynamic response of a cantilever in contact with a sample to extract local material properties. Achieving quantitative results in these techniques usually requires the assumption of a certain shape of cantilever vibration. We present a technique that allows in-situ measurements of the vibrational shape of AFM cantilevers coupled to surfaces. This technique opens up unique approaches to nanoscale material property mapping, which are not possible with single point measurements alone

  12. Sequential staining to assess viability and starch content in individual pollen grains.

    Science.gov (United States)

    Jefferies, C J

    1977-09-01

    Individual pollen grains may be assessed for viability and starch content by dusting a sample onto drops of an aqueous medium containing fluorescein diacetate and potassium iodide, and allowing them to accumulate free fluorescein for ten minutes. They are then illuminated with ultraviolet or blue light and photographed to record the proportion that fluoresce, as an index of viability. The preparation is exposed to iodine vapor and the same field of view rephotographed in bright field illumination to record starch content. Iodine vapor avoids disturbing the grains by adding further liquid, so that the same pollen grains may be classified by fluorescence and starch content. The method makes it possible to test whether viability and starch content are associated or depend on other variables, such as pollen-grain diameter. Iodine-potassium iodide is shown to be inadequate as a test for pollen viability. The method is quick and easy and provides data not otherwise available.

  13. Pollen analysis of coal-bearing Miocene sedimentary rocks from the Seyitomer basin (Kutahya), western Anatolia

    Energy Technology Data Exchange (ETDEWEB)

    Yavuz-Isik, N. [Ondokuz Mayis University, Kurupelit (Turkey). Dept. of Civil Engineering

    2007-09-15

    The late Early-Middle Miocene sequences of the Seyitomer Basin (western Anatolia) were palynologically investigated. Fifty-five taxa belonging to seven gymnospermous and 48 angiospermous pollen genera were identified in the 19 productive samples. Two pollen zones were recognised based on the changing abundance of individual tree taxa. Zone 1 is characterized by predominance of Pinus and Cedrus. Zone 2 is characterized by predominance of deciduous Quercus and evergreen Quercus and a marked reduction in representation of Taxodiaceae. The differences in the pollen spectra between Zone 1 and Zone 2 may reflect the global Middle Miocene cooling. These results are largely comparable to pollen data derived from the neighbouring areas. The vegetation of the Seyitomer Basin was dominated by trees. This palynological analysis reveals the existence of a swamp-forest developed in a subtropical to warm-temperate humid climate.

  14. Pollen productivity and morphology of pollen grains in two cultivars of honeyberry (Lonicera kamtschatica (Sevast. Pojark.

    Directory of Open Access Journals (Sweden)

    Małgorzata Bożek

    2012-12-01

    Full Text Available In the years 2004-2006, investigations on the abundance of pollen production in two cultivars of Lonicera kamtschatica (Sevast. Pojark. - Atut and Duet, were conducted at the Felin Experimental Farm of the Agricultural University in Lublin. Moreover, the viability of pollen grains was estimated and measurements of their size were taken. Ten flowers of both studied cultivars supplied 11.42 mg of pollen and the average pollen productivity per 1 ha of a several-years-old plantation was 30.04 kg. The pollen of the observed plants was eagerly collected by honey bees. Pollen grains of both cultivars are suboblate. Considering their size, they can be described as large ones (P=47.55 µm, E=60.37 µm. Pollen viability for both cultivars is high, about 95%.

  15. A Review of the Effects of Major Atmospheric Pollutants on Pollen Grains, Pollen Content, and Allergenicity

    Science.gov (United States)

    Sénéchal, Hélène; Visez, Nicolas; Charpin, Denis; Shahali, Youcef; Peltre, Gabriel; Biolley, Jean-Philippe; Lhuissier, Franck; Couderc, Rémy; Yamada, Ohri; Malrat-Domenge, Audrey; Pham-Thi, Nhân; Poncet, Pascal; Sutra, Jean-Pierre

    2015-01-01

    This review summarizes the available data related to the effects of air pollution on pollen grains from different plant species. Several studies carried out either on in situ harvested pollen or on pollen exposed in different places more or less polluted are presented and discussed. The different experimental procedures used to monitor the impact of pollution on pollen grains and on various produced external or internal subparticles are listed. Physicochemical and biological effects of artificial pollution (gaseous and particulate) on pollen from different plants, in different laboratory conditions, are considered. The effects of polluted pollen grains, subparticles, and derived aeroallergens in animal models, in in vitro cell culture, on healthy human and allergic patients are described. Combined effects of atmospheric pollutants and pollen grains-derived biological material on allergic population are specifically discussed. Within the notion of “polluen,” some methodological biases are underlined and research tracks in this field are proposed. PMID:26819967

  16. A Review of the Effects of Major Atmospheric Pollutants on Pollen Grains, Pollen Content, and Allergenicity

    Directory of Open Access Journals (Sweden)

    Hélène Sénéchal

    2015-01-01

    Full Text Available This review summarizes the available data related to the effects of air pollution on pollen grains from different plant species. Several studies carried out either on in situ harvested pollen or on pollen exposed in different places more or less polluted are presented and discussed. The different experimental procedures used to monitor the impact of pollution on pollen grains and on various produced external or internal subparticles are listed. Physicochemical and biological effects of artificial pollution (gaseous and particulate on pollen from different plants, in different laboratory conditions, are considered. The effects of polluted pollen grains, subparticles, and derived aeroallergens in animal models, in in vitro cell culture, on healthy human and allergic patients are described. Combined effects of atmospheric pollutants and pollen grains-derived biological material on allergic population are specifically discussed. Within the notion of “polluen,” some methodological biases are underlined and research tracks in this field are proposed.

  17. Surface plasmon resonance based sensing of different chemical and biological samples using admittance loci method

    Science.gov (United States)

    Brahmachari, Kaushik; Ghosh, Sharmila; Ray, Mina

    2013-06-01

    The admittance loci method plays an important role in the design of multilayer thin film structures. In this paper, admittance loci method has been explored theoretically for sensing of various chemical and biological samples based on surface plasmon resonance (SPR) phenomenon. A dielectric multilayer structure consisting of a Boro silicate glass (BSG) substrate, calcium fluoride (CaF2) and zirconium dioxide (ZrO2) along with different dielectric layers has been investigated. Moreover, admittance loci as well as SPR curves of metal-dielectric multilayer structure consisting of the BSG substrate, gold metal film and various dielectric samples has been simulated in MATLAB environment. To validate the proposed simulation results, calibration curves have also been provided.

  18. The determination of the botanical origin in honeys with over-represented pollen: combination of melissopalynological, sensory and physicochemical analysis.

    Science.gov (United States)

    Rodopoulou, Maria-Anna; Tananaki, Chrysoula; Dimou, Maria; Liolios, Vasilios; Kanelis, Dimitrios; Goras, Georgios; Thrasyvoulou, Andreas

    2018-05-01

    Pollen analysis of honey is the basic method for the determination of its botanical origin. However, the presence of over-represented pollen in honeys may lead the analysis to false results. This can be more severe if this pollen is present in unifloral under-represented honeys of commercial importance (e.g. thyme honey). In the present study, we investigated the abundance of over-represented pollen grains on several quality characteristics in honey samples. In particular, we mixed honeys characterised as over-represented, specifically chestnut and eucalyptus, with thyme honeys in different analogies, and we also analysed the melissopalynological, organoleptic, physicochemical (water content, electrical conductivity, colour) and volatile characteristics of the blends. The most sensitive parameters were the microscopic characteristics, followed by the organoleptic ones. Blends of thyme honey with an originally low percentage of thyme pollen were the most influenced and could not be characterised as unifloral regarding their melissopalynological characteristics, even when they were mixed with small quantities of honeys with over-represented pollen (i.e. 5%). The present study confirms that, in the case of presence of over-represented pollen in honeys, pollen analysis alone cannot give trustworthy results for the determination of the botanical origin, even though their exclusion during pollen analysis, when they are present in percentages of up to 30%, could provide more accurate results. Consequently, pollen analysis should also be combined with the other analyses, especially in honeys with under-represented and over-represented pollens, to give safer results for the botanical characterisation of honeys. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  19. Control of the positional relationship between a sample collection instrument and a surface to be analyzed during a sampling procedure using a laser sensor

    Science.gov (United States)

    Van Berkel, Gary J [Clinton, TN; Kertesz, Vilmos [Knoxville, TN

    2012-02-21

    A system and method utilizes distance-measuring equipment including a laser sensor for controlling the collection instrument-to-surface distance during a sample collection process for use, for example, with mass spectrometric detection. The laser sensor is arranged in a fixed positional relationship with the collection instrument, and a signal is generated by way of the laser sensor which corresponds to the actual distance between the laser sensor and the surface. The actual distance between the laser sensor and the surface is compared to a target distance between the laser sensor and the surface when the collection instrument is arranged at a desired distance from the surface for sample collecting purposes, and adjustments are made, if necessary, so that the actual distance approaches the target distance.

  20. A comparison of surface wipe media for sampling lead on hands.

    Science.gov (United States)

    Boeniger, Mark

    2006-08-01

    Hand contamination by toxic agents such as lead presents a potentially significant health hazard to workers if the contamination is transferred to the mouth by food, smoking, or touching the mouth. One method to sample the mass of contamination on hands is to wipe the skin and analyze the wipe media for the analyte. Several commercially available, prewetted wipe media were evaluated and compared. The Palintest and Wash'n Dri media are made of cellulose fiber; the Ghost wipe is made of a nonwoven polyvinyl alcohol fiber. ASTM test method E1792 for surface lead sampling provides some specified minimum requirements and some general, nonspecific criteria that these media should meet. However, no objective determination of the performance or characteristics of these different wiping media were found in the open literature for sampling lead on hands, particularly relating to typical collection efficiency. To test the recovery of lead oxide dust collected from two hands, two different loading levels were used for each wipe medium. Four successive wipes were collected and analyzed individually. The results of this study indicate that only about 52-62% of the total lead loading is recovered with the first wipe, but that up to 75% recovery could be obtained by combining all three successive wipes. This study also describes testing several physical aspects of these wipes that included tensile strength, wetness, and drying rate, which are characteristics that are not specified by ASTM E1792. The results indicate a higher fragility among the cellulosic wipes, less moisture content, and higher drying rates than the Ghost wipe. This information should be helpful when selecting a wipe material that is best suited for an environmental or industrial hygiene surface or skin sampling task and might also be useful for improving such media in the future.

  1. Pollen viability and membrane lipid composition

    NARCIS (Netherlands)

    Bilsen, van D.G.J.L.

    1993-01-01

    In this thesis membrane lipid composition is studied in relation to pollen viability during storage. Chapter 1 reviews pollen viability, membranes in the dry state and membrane changes associated with cellular aging. This chapter is followed by a study of age-related changes in phospholipid

  2. Pollen Evolution in Yams (Dioscorea: Dioscoreaceae)

    NARCIS (Netherlands)

    Schols, P.; Wilkin, P.; Furness, C.; Huysmans, S.; Smets, E.

    2005-01-01

    Pollen character evolution in yams (Dioscorea: Dioscoreaceae) was investigated in relation to the phylogeny obtained from a recent combined analysis of rbcL and matK gene sequences. The following characters were evaluated: pollen size, aperture number, sexine ornamentation, perforation density, and

  3. Practical aspects of daily pollen census

    NARCIS (Netherlands)

    Quarles van Ufford, W.J.

    1967-01-01

    It is important for diagnostic purposes to keep a daily pollen count. Correlating this with hayfever symptoms, it is then possible to gain insights into critical hours and circumstances which favor an outbreak. Thus we learn to predict the severity of a pollen season and to take preventive measures.

  4. A combinatorial approach to angiosperm pollen morphology.

    Science.gov (United States)

    Mander, Luke

    2016-11-30

    Angiosperms (flowering plants) are strikingly diverse. This is clearly expressed in the morphology of their pollen grains, which are characterized by enormous variety in their shape and patterning. In this paper, I approach angiosperm pollen morphology from the perspective of enumerative combinatorics. This involves generating angiosperm pollen morphotypes by algorithmically combining character states and enumerating the results of these combinations. I use this approach to generate 3 643 200 pollen morphotypes, which I visualize using a parallel-coordinates plot. This represents a raw morphospace. To compare real-world and theoretical morphologies, I map the pollen of 1008 species of Neotropical angiosperms growing on Barro Colorado Island (BCI), Panama, onto this raw morphospace. This highlights that, in addition to their well-documented taxonomic diversity, Neotropical rainforests also represent an enormous reservoir of morphological diversity. Angiosperm pollen morphospace at BCI has been filled mostly by pollen morphotypes that are unique to single plant species. Repetition of pollen morphotypes among higher taxa at BCI reflects both constraint and convergence. This combinatorial approach to morphology addresses the complexity that results from large numbers of discrete character combinations and could be employed in any situation where organismal form can be captured by discrete morphological characters. © 2016 The Author(s).

  5. Sample preparation for scanning electron microscopy of plant surfaces--horses for courses.

    Science.gov (United States)

    Pathan, A K; Bond, J; Gaskin, R E

    2008-12-01

    Plant tissues must be dehydrated for observation in most electron microscopes. Although a number of sample processing techniques have been developed for preserving plant tissues in their original form and structure, none of them are guaranteed artefact-free. The current paper reviews common scanning electron microscopy techniques and the sample preparation methods employed for visualisation of leaves under specific types of electron microscopes. Common artefacts introduced by specific techniques on different leaf types are discussed. Comparative examples are depicted from our lab using similar techniques; the pros and cons for specific techniques are discussed. New promising techniques and microscopes, which can alleviate some of the problems encountered in conventional methods of leaf sample processing and visualisation, are also discussed. It is concluded that the choice of technique for a specific leaf sample is dictated by the surface features that need to be preserved (such as trichomes, epidermal cells or wax microstructure), the resolution to be achieved, availability of the appropriate processing equipment and the technical capabilities of the available electron microscope.

  6. On-matrix Derivatization for Dynamic Headspace Sampling of Nonvolatile Surface Residues

    Energy Technology Data Exchange (ETDEWEB)

    Harvey, Scott D.; Wahl, Jon H.

    2012-09-01

    The goal of this study is to extend sampling by the field and laboratory emission cell (FLEC) purge-and-trap technique to applications that target nonvolatile residues. On-matrix derivatization of residues to render analytes stable and more volatile is explored to achieve this goal. Results show that on-matrix derivatizations of nerve agent hydrolysis products (monoalkyl methylphosphonic acids and methylphosphonic acid [MPA]) with diazomethane were successful on glass and painted wallboard (at the 10-µg level). It also was successful on the more difficult concrete (at the 500-µg level) and carpet (at the 20-µg level) substrates that cannot be successfully sampled using swipe techniques. Analysis of additional chemical warfare (CW)-associated residues can be approached by on-matrix derivatization with trifluoroacetic anhydride (TFAA). For example, amines (used as stabilizers or present as decomposition products of the nerve agent VX) or thiodiglycol (hydrolysis product of sulfur mustard) could be sampled as their TFAA derivatives from glass, painted wallboard, and concrete (at the 40-µg level), as well as carpet (at the 80-µg level) surfaces. Although the amine and thiodiglycol are semi-volatile and could be sampled directly, derivatization improves the recovery and chromatographic behavior of these analytes.

  7. Validation of the SASB Introject Surface in a Norwegian clinical and nonclinical sample.

    Science.gov (United States)

    Monsen, Jon T; von der Lippe, Anna Louise; Havik, Odd E; Halvorsen, Margrethe S; Eilertsen, Dag E

    2007-04-01

    In this study, we examined the reliability and construct validity of the Structural Analysis of Social Behavior Introject Surface, Intrex long form A (SASB-IS; Benjamin, 1995) in 2 Norwegian samples. The fit of the 8 SASB-IS scales to the structural requirements of a circumplex model with relaxed equal spacing constraints was reasonably good in an outpatient sample, but poor in a normal reference sample. The deviations from the equal spacing based on an ideal circumplex model, however, seem to have minimal implications for the utility of the instrument in clinical assessment. The reliability of the SASB-IS was acceptable on most scales, but two scales had unacceptable low reliability. Correspondence with external criteria supported the validity of the SASB-IS in both samples. Profile patterns related to different segments of the introject circumplex model were systematically related to severity of psychopathology: Hostile and accepting patterns of self-relatedness formed polar opposites; control patterns and intermediate patterns gave intermediate pathology scores.

  8. Chemical analysis of Greek pollen - Antioxidant, antimicrobial and proteasome activation properties

    Directory of Open Access Journals (Sweden)

    Gonos Efstathios

    2011-06-01

    Full Text Available Abstract Background Pollen is a bee-product known for its medical properties from ancient times. In our days is increasingly used as health food supplement and especially as a tonic primarily with appeal to the elderly to ameliorate the effects of ageing. In order to evaluate the chemical composition and the biological activity of Greek pollen which has never been studied before, one sample with identified botanical origin from sixteen different common plant taxa of Greece has been evaluated. Results Three different extracts of the studied sample of Greek pollen, have been tested, in whether could induce proteasome activities in human fibroblasts. The water extract was found to induce a highly proteasome activity, showing interesting antioxidant properties. Due to this activity the aqueous extract was further subjected to chemical analysis and seven flavonoids have been isolated and identified by modern spectral means. From the methanolic extract, sugars, lipid acids, phenolic acids and their esters have been also identified, which mainly participate to the biosynthetic pathway of pollen phenolics. The total phenolics were estimated with the Folin-Ciocalteau reagent and the total antioxidant activity was determined by the DPPH method while the extracts and the isolated compounds were also tested for their antimicrobial activity by the dilution technique. Conclusions The Greek pollen is rich in flavonoids and phenolic acids which indicate the observed free radical scavenging activity, the effects of pollen on human fibroblasts and the interesting antimicrobial profile.

  9. Volatile organic compound matrix spike recoveries for ground- and surface-water samples, 1997-2001

    Science.gov (United States)

    Rowe, Barbara L.; Delzer, Gregory C.; Bender, David A.; Zogorski, John S.

    2005-01-01

    The U.S. Geological Survey's National Water-Quality Assessment (NAWQA) Program used field matrix spikes (FMSs), field matrix spike replicates (FMSRs), laboratory matrix spikes (LMSs), and laboratory reagent spikes (LRSs), in part, to assess the quality of volatile organic compound (VOC) data from water samples collected and analyzed in more than 50 of the Nation's largest river basins and aquifers (Study Units). The data-quality objectives of the NAWQA Program include estimating the extent to which variability, degradation, and matrix effects, if any, may affect the interpretation of chemical analyses of ground- and surface-water samples. In order to help meet these objectives, a known mass of VOCs was added (spiked) to water samples collected in 25 Study Units. Data within this report include recoveries from 276 ground- and surface-water samples spiked with a 25-microliter syringe with a spike solution containing 85 VOCs to achieve a concentration of 0.5 microgram per liter. Combined recoveries for 85 VOCs from spiked ground- and surface-water samples and reagent water were used to broadly characterize the overall recovery of VOCs. Median recoveries for 149 FMSs, 107 FMSRs, 20 LMSs, and 152 LRSs were 79.9, 83.3, 113.1, and 103.5 percent, respectively. Spike recoveries for 85 VOCs also were calculated individually. With the exception of a few VOCs, the median percent recoveries determined from each spike type for individual VOCs followed the same pattern as for all VOC recoveries combined, that is, listed from least to greatest recovery-FMSs, FMSRs, LRSs, and LMSs. The median recoveries for individual VOCs ranged from 63.7 percent to 101.5 percent in FMSs; 63.1 percent to 101.4 percent in FMSRs; 101.7 percent to 135.0 percent in LMSs; and 91.0 percent to 118.7 percent in LRSs. Additionally, individual VOC recoveries were compared among paired spike types, and these recoveries were used to evaluate potential bias in the method. Variability associated with field

  10. Organismal versus Environmental Control of the Carbon Isotope Composition of Dicot Angiosperm Pollen: Implications for Paleoenvironmental Reconstruction

    Science.gov (United States)

    King, D. P.; Schubert, B.; Foelber, K.; Jahren, H.

    2011-12-01

    The prevalence and diagenetic resilience of palynomorphs in Proterozoic and Phanerozoic sediments has led researchers to investigate its potential as an environmental proxy based on its stable isotope composition. Towards this, Loader and Hemming (2001), noted that the carbon isotope composition (δ13C) of modern Pinus sylvestris pollen exine correlates with the developmental period temperature (°C) of the pollen (R2=0.68), implying that the δ13C of gymnosperm pollen could be quantitatively utilized as a paleotemperature proxy. However, the majority of pollen-producing organisms during the last ~120 million years have been angiosperms, which are subject to complex internal signaling for reproduction, in addition to environmental triggers. Because these internal signals control the relative proportion of lipids, long-chain fatty acids, and polysaccharides within pollen grains, we hypothesized that the δ13C variability in pollen (δ13Cpollen) from several plants subject to the same external environmental parameters is of the same magnitude as the amount attributed to the environment for gymnosperms. Within growth chambers, the test organism (Brassica rapa) was cultivated under constant light, water, pCO2, and nutrient supply, but exhibited average δ13Cpollen variability = 4.35% within any chamber (n = 6 to 8 plants per chamber). Field experiments were also conducted in which the pollen from the test organism (Hibiscus spp.) was sampled from several botanical gardens within the state of Hawaii. Pollen collected from any one botanical garden exhibited an average δ13Cpollen variability = 4.5% (up to 5 plants per garden). Upon comparing chambers operating at different temperatures (17°C to 32°C), we discovered no correlation (R2=0.01) between the developmental period temperature (°C) and the δ13C of B. rapa pollen; similarly, no correlation was found between the δ13C of Hibiscus pollen and its developmental period temperature (°C) (R2=0.12). This work

  11. Involvement of cross-reactive carbohydrate determinants-specific IgE in pollen allergy testing.

    Science.gov (United States)

    Yokoi, Hidenori; Yoshitake, Hiroshi; Matsumoto, Yuma; Kawada, Michitsugu; Takato, Yoshiki; Shinagawa, Kiyomi; Sakurai, Hiroyuki; Saito, Koichiro

    2017-01-01

    Specific IgE antibodies against the low-molecular-weight carbohydrate antigen that does not bridge IgE molecules on mast cells are not associated with clinical symptoms. Cross reactivity can be determined in allergen-specific IgE detection assays when the carbohydrate structures between pollen allergens and plant derived food allergens are similar; in such cases, false positive results for grain or legume allergens can be reported for pollen allergic patients who are not sensitized to those allergens. This phenomenon arises owing to the presence of cross-reactive carbohydrate determinants (CCDs). This study aimed to assess the impact of CCD interference on the results for pollen allergen-specific IgE antibodies in the general adult population and to perform CCD inhibition tests evaluating the involvement of CCD on samples positive to pollen allergens. Serum samples from 322 subjects were tested for IgE antibodies to pollens and CCD. The research subjects were given questionnaires about pollen allergic symptoms to help assess the presence of allergies. Allergen IgE antibodies for Japanese cedar, Japanese cypress, orchard grass, ragweed, MUXF, bromelain, horseradish peroxidase (HRP), and ascorbate oxidase (ASOD) were analyzed. It was observed that among individuals who tested positive to any of the pollen allergens, the positive ratio of CCD-specific IgE antibody was the highest for HRP (13.5%-50.0%). The results from the inhibition tests revealed that CCD was marginally present. Although IgE antibodies for cedar pollen did not react with CCD, IgE antibodies for Japanese cypress, orchard grass, and ragweed might be detected by the presence of CCD. The results of the inhibition tests revealed the obvious presence of CCD suggesting its involvement. Considering these findings, careful evaluation of patient IgE results should be performed for Japanese cypress, orchard grass, and ragweed.

  12. Preservation of cycad and Ginkgo pollen

    Science.gov (United States)

    Frederiksen, N.O.

    1978-01-01

    Pollen grains of Ginkgo, Cycas, and Encephalartos were chemically treated together with pollen of Quercus, Alnus, and Pinus, the latter three genera being used as standards. The experiments showed that: (1) boiling the pollen for 8-10 hours in 10% KOH had little if any effect on any of the grains; (2) lengthy acetolysis treatment produced some degradation or corrosion, particularly in Ginkgo and Cycas, but the grains of even these genera remained easily recognizable; (3) oxidation with KMnO4 followed by H2O2 showed that pollen of Ginkgo, Cycas, and Encephalartos remains better preserved than that of Quercus and Alnus, and although Ginkgo and Encephalartos probably are slightly less resistant to oxidation than Pinus, no great differences exists between these monosulcate types and Pinus. Thus the experiments show that, at least for sediments low in bacteria, cycad and Ginkgo pollen should be well represented in the fossil record as far as their preservational capabilities are concerned. ?? 1978.

  13. The Pseudomonas aeruginosa chemotaxis methyltransferase CheR1 impacts on bacterial surface sampling.

    Directory of Open Access Journals (Sweden)

    Juliane Schmidt

    Full Text Available The characterization of factors contributing to the formation and development of surface-associated bacterial communities known as biofilms has become an area of intense interest since biofilms have a major impact on human health, the environment and industry. Various studies have demonstrated that motility, including swimming, swarming and twitching, seems to play an important role in the surface colonization and establishment of structured biofilms. Thereby, the impact of chemotaxis on biofilm formation has been less intensively studied. Pseudomonas aeruginosa has a very complex chemosensory system with two Che systems implicated in flagella-mediated motility. In this study, we demonstrate that the chemotaxis protein CheR1 is a methyltransferase that binds S-adenosylmethionine and transfers a methyl group from this methyl donor to the chemoreceptor PctA, an activity which can be stimulated by the attractant serine but not by glutamine. We furthermore demonstrate that CheR1 does not only play a role in flagella-mediated chemotaxis but that its activity is essential for the formation and maintenance of bacterial biofilm structures. We propose a model in which motility and chemotaxis impact on initial attachment processes, dispersion and reattachment and increase the efficiency and frequency of surface sampling in P. aeruginosa.

  14. Surface-sampling and analysis of TATP by swabbing and gas chromatography/mass spectrometry.

    Science.gov (United States)

    Romolo, Francesco Saverio; Cassioli, Luigi; Grossi, Silvana; Cinelli, Giuseppe; Russo, Mario Vincenzo

    2013-01-10

    The method of sample recovery for trace detection and identification of explosives plays a critical role in several criminal investigations. After bombing, there can be difficulties in sending big objects to a laboratory for analysis. Traces can also be searched for on large surfaces, on hands of suspects or on surfaces where the explosive was placed during preparatory phases (e.g. places where an IED was assembled, vehicles used for transportation, etc.). In this work, triacetone triperoxide (TATP) was synthesized from commercial precursors following reported methods. Several portions of about 6mg of TATP were then spread on different surfaces (e.g. floors, tables, etc.) or used in handling tests. Three different swabbing systems were used: a commercial swab, pre-wetted with propan-2-ol (isopropanol) and water (7:3), dry paper swabs, and cotton swabs wetted with propan-2-ol. Paper and commercial swabs were also used to sample a metal plate, where a small charge of about 4g of TATP was detonated. Swabs were sealed in small glass jars with screw caps and Parafilm(®) M and sent to the laboratory for analysis. Swabs were extracted and analysed several weeks later by gas chromatography/mass spectrometry. All the three systems gave positive results, but wetted swabs collected higher amounts of TATP. The developed procedure showed its suitability for use in real cases, allowing TATP detection in several simulations, including a situation in which people wash their hands after handling the explosive. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

  15. Application of ITS2 metabarcoding to determine the provenance of pollen collected by honey bees in an agroecosystem.

    Science.gov (United States)

    Richardson, Rodney T; Lin, Chia-Hua; Sponsler, Douglas B; Quijia, Juan O; Goodell, Karen; Johnson, Reed M

    2015-01-01

    Melissopalynology, the identification of bee-collected pollen, provides insight into the flowers exploited by foraging bees. Information provided by melissopalynology could guide floral enrichment efforts aimed at supporting pollinators, but it has rarely been used because traditional methods of pollen identification are laborious and require expert knowledge. We approach melissopalynology in a novel way, employing a molecular method to study the pollen foraging of honey bees (Apis mellifera) in a landscape dominated by field crops, and compare these results to those obtained by microscopic melissopalynology. • Pollen was collected from honey bee colonies in Madison County, Ohio, USA, during a two-week period in midspring and identified using microscopic methods and ITS2 metabarcoding. • Metabarcoding identified 19 plant families and exhibited sensitivity for identifying the taxa present in large and diverse pollen samples relative to microscopy, which identified eight families. The bulk of pollen collected by honey bees was from trees (Sapindaceae, Oleaceae, and Rosaceae), although dandelion (Taraxacum officinale) and mustard (Brassicaceae) pollen were also abundant. • For quantitative analysis of pollen, using both metabarcoding and microscopic identification is superior to either individual method. For qualitative analysis, ITS2 metabarcoding is superior, providing heightened sensitivity and genus-level resolution.

  16. Studies on the comparison of pollen morphology and viability of four naturally distributed and commercial varieties of anemone coronaria L

    International Nuclear Information System (INIS)

    Candan, F.

    2015-01-01

    The present study presents a comparison of the pollen morphology and viability of naturally distributed four varieties of Anemone coronaria L. These are A. coronaria var. coccinea (Jord.) Burn, A. coronaria var. rosea (Hanry) Batt, A. coronaria var. cyanea, A. coronaria var. alba Goaty and Pens) and its commercial cultivars. The four varieties were collected from areas near the road side along the Kirkagac-Soma highway in the State of Manisa. The commercial cultivars were obtained from the commercial flower growers in the Urla region of zmir. Pollen viability levels decreased in all commercial cultivars of A. coronaria. The highest reduction in pollen viability was recorded in A. coronaria pink cultivars of de Caen group. The general pollen type is prolate spheroidal in all pure forms, but there are some pollen morphological features which were not observed in the natural ones, although encountered in all commercial cultivars. On the other hand, various non-viable pollen types like wrinkled pollens, with abnormally shaped pollens or pollinia were found in the commercial cultivars. It was concluded that pesticides used to produce more flowers with rapid growth are the major cause for his reduction. Another reason could be the use of tetraploid F1 hybrids of A. coronaria cultivars of de Caen group as commercial samples. (author)

  17. Modern sedimentation patterns in Laguna de Medina, Southern Spain, derived from lake surface and soil samples

    Science.gov (United States)

    van ´t Hoff, Jasmijn; Schröder, Tabea; Reicherter, Klaus; Held, Peter; Melles, Martin

    2016-04-01

    In September 2014 and March 2015, a 25.66 m long sediment core (Co1313) was retrieved from the centre of Laguna de Medina, a small endorheic salt lake in Cádiz, SW Spain. This record covers the last 9.000 years, thus providing an unique archive for Holocene climatic and environmental changes with extraordinary high temporal resolution. For a better understanding of the palaeoenvironmental proxies to be analysed on the sediment core, the modern processes of sediment formation in the lake and its catchment under known environmental conditions were investigated on a set of 46 lake sediment surface samples and 32 soil surface sediment samples from the lake and the close surroundings, respectively. These samples were analysed for bulk mineralogy (XRD), chemical composition (XRF), grain-size distribution (laser scanner), and carbonate, total organic carbon (TOC), nitrogen (TN) and sulphur (TS) contents (elemental analyser). Based on the mineralogical, geochemical and granulometrical data, the lake can be divided into four zones. The northern shore is characterized by particularly high quartz contents and coarse grain sizes. This reflects input from ancient terraces of the Guadalete River that are exposed in that area. The southern shore is characterised by high calcite contents due to sediment supply from the Cretaceous ´Capas rojaś, a series of Subbetic deep-water marl- and limestones. The southeastern and to a lesser extend the northwestern shores show particularly high dolomite contents, reflecting the Triassic dolomites outcroping in the southeastern catchment. The southeastern shore furthermore is also influenced by strong terrestrial input of the Triassic Keuper facies from the most important inlet, Arroyo Fuente Bermeja, as reflected by high contents of Ti, K, Al, Fe, Rb in the lake sediments. The last zone comprises only a small part of the western shore and is characterized by a relatively high gypsum amount. This does not reflect the geology in the catchment

  18. Taraxerol and Rhizophora pollen as proxies for tracking past Mangrove ecosystems

    NARCIS (Netherlands)

    Sinninghe Damsté, J.S.; Versteegh, G.J.M.; Schefuß, E.; Dupont, L.; Marret, F.; Jansen, J.H.F.

    2004-01-01

    Angola Basin and Cape Basin (southeast Atlantic) surface sediments and sediment cores show that maxima in the abundance of taraxerol (relative to other land-derived lipids) covary with maxima in the relative abundance of pollen from the mangrove tree genus Rhizophora and that in the surface

  19. Data Validation Package October 2016 Groundwater and Surface Water Sampling at the Monticello, Utah, Disposal and Processing Sites January 2017

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, Jason [USDOE Office of Legacy Management (LM), Washington, DC (United States); Smith, Fred [Navarro Research and Engineering, Inc., Grand Junction, CO (United States)

    2017-02-01

    Sampling Period: October 10–12, 2016. This semiannual event includes sampling groundwater and surface water at the Monticello Disposal and Processing Sites. Sampling and analyses were conducted as specified in the Sampling and Analysis Plan for U.S. Department of Energy Office of Legacy Management Sites (LMS/PRO/S04351, continually updated) and Program Directive MNT-2016-01. Samples were collected from 54 of 64 planned locations (16 of 17 former mill site wells, 15 of 18 downgradient wells, 7 of 9 downgradient permeable reactive barrier wells, 3 of 3 bedrock wells, 4 of 7 seeps and wetlands, and 9 of 10 surface water locations).

  20. Application of HPLC-DAD Technique for Determination of Phenolic Compounds in Bee Pollen Loads

    Directory of Open Access Journals (Sweden)

    Waś Ewa

    2017-06-01

    Full Text Available A method was elaborated to determine phenolic compounds (vanillin, caffeic, p-coumaric and salicylic acids, and flavonoids: rutin, hesperetin, quercetin, pinocembrin, apigenin, kaempferol, isorhamnetin, chrysin, and acacetin in bee pollen loads using highperformance liquid chromatography with a diode array detector (HPLC-DAD. Phenolic compounds from bee pollen were isolated on Cleanert C18-SPE columns (500 mg/6 mL, Agela Technologies. Polyphenols were identified by comparing the retention times and spectra of compounds found in pollen load samples with the ones of the standard mixture. Quantitative analysis was conducted using the external standard method. In addition, basic validation parameters for the method were determined. For the identified compounds (except for the salicylic acid, satisfactory (≥0.997 linear correlations were obtained. The elaborated method showed high repeatability and inter-laboratory reproducibility. Variability coeffcients of the majority of phenolic compounds did not exceed 10% in conditions of repeatability and inter-laboratory reproducibility, and for the total polyphenolic content they were 1.7 and 5.1%, respectively. The pollen load samples (n = 15 differed in qualitative and quantitative composition of the phenolic compounds. In all the samples, we identified the p-coumaric and salicylic acids and flavonoids rutin, hesperetin, and apigenin nevertheless, these compounds’ contents significantly differed among individual samples. The total phenolic content in the tested samples of pollen loads ranged from 0.653 to 5.966 mg/100 g (on average 2.737 mg/100 g.

  1. Antimicrobial Activity of Bee Collected Pollen against Clostridia

    Directory of Open Access Journals (Sweden)

    Miroslava Kačániová

    2015-02-01

    Full Text Available Clostridium is an anaerobic, endospore forming Gram-positive bacillus genus containing many important pathogenic species. Many naturally occurring compounds present in plants, herbs, and spices have been shown to possess antimicrobial effect against foodborne pathogens. In the present study, the antimicrobial activities of the bee collected pollen samples were investigated. The antimicrobial activities were determined by using agar disc diffusion method against Clostridium genus. Antibacterial activity was assessed on the clostridia: Clostridium butyricum, Clostridium hystoliticum, Clostridium intestinale, Clostridium perfringens and Clostridium ramosum. The results of the disk diffusion method showed very different activity against all tested strains of clostridia. The best antimicrobial activity of bee collected pollen against C. butyricum and C. perfringens were found.

  2. Analysis of Samples Collected from the Surface of Interim Storage Canisters at Calvert Cliffs in June 2017: Revision 01.

    Energy Technology Data Exchange (ETDEWEB)

    Bryan, Charles R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Schindelholz, Eric John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-11-01

    In June 2017, dust and salt samples were collected from the surface of Spent Nuclear Fuel (SNF) dry storage canisters at the Calvert Cliffs Nuclear Power Plant. The samples were delivered to Sandia National laboratories for analysis. Two types of samples were collected: filter-backed Scotch-Brite TM pads were used to collect dry dust samples for characterization of salt and dust morphologies and distributions; and Saltsmart TM test strips were used to collect soluble salts for determining salt surface loadings per unit area. After collection, the samples were sealed into plastic sleeves for shipping. Condensation within the sleeves containing the Scotch-Brite TM samples remobilized the salts, rendering them ineffective for the intended purpose, and also led to mold growth, further compromising the samples; for these reasons, the samples were not analyzed. The SaltSmart TM samples were unaffected and were analyzed by ion chromatography for major anions and cations. The results of those analyses are presented here.

  3. Surface Acoustic Wave Nebulisation Mass Spectrometry for the Fast and Highly Sensitive Characterisation of Synthetic Dyes in Textile Samples

    NARCIS (Netherlands)

    Astefanei, A.; van Bommel, M.; Corthals, G.L.

    2017-01-01

    Surface acoustic wave nebulisation (SAWN) mass spectrometry (MS) is a method to generate gaseous ions compatible with direct MS of minute samples at femtomole sensitivity. To perform SAWN, acoustic waves are propagated through a LiNbO3 sampling chip, and are conducted to the liquid sample, which

  4. Occurrence of mycotoxin producing fungi in bee pollen.

    Science.gov (United States)

    González, G; Hinojo, M J; Mateo, R; Medina, A; Jiménez, M

    2005-11-15

    The natural mycobiota occurring in bee pollen is studied in the present report with special attention to analyze the incidence of fungal species that are potential producers of mycotoxins. A total of 90 ready-to-eat bee pollen samples were analyzed. Eighty-seven samples were collected in stores placed in different Spanish areas and three were from Buenos Aires (Argentina). The statistical results (ANOVA) showed that yeasts and Penicillium spp. were the predominant fungi. With regard to the potential mycotoxin producing species, Penicillium verrucosum, Aspergillus niger aggregate, Aspergillus carbonarius, Aspergillus ochraceus, Aspergillus flavus, Aspergillus parasiticus and Alternaria spp. were found. The last genus was isolated very frequently. The potential ability for producing ochratoxin A (OTA) and aflatoxins B(1), B(2), G(1) and G(2) was studied by culturing in vitro the isolates followed by analysis of these mycotoxins in culture extracts by HPLC with fluorescent detection. It was found that 100%, 53.3%, 33.3% and 25% of the isolates of A. carbonarius, A. ochraceus, P. verrucosum and A. niger aggregate, respectively, produced OTA. Moreover, 28.6% of the isolates from the A. flavus plus A. parasiticus group were able to produce aflatoxin B(1). Aflatoxin B(2) was detected in only 10% of the cultures. Aflatoxins G(1) and G(2) were not detected in cultures under the assayed conditions. This is the first report carried out on the natural mycobiota occurring in bee pollen in general and on the toxigenic capability of these isolates in particular.

  5. Pollen dispersal in sugar beet production fields.

    Science.gov (United States)

    Darmency, Henri; Klein, Etienne K; De Garanbé, Thierry Gestat; Gouyon, Pierre-Henri; Richard-Molard, Marc; Muchembled, Claude

    2009-04-01

    Pollen-mediated gene flow has important implications for biodiversity conservation and for breeders and farmers' activities. In sugar beet production fields, a few sugar beet bolters can produce pollen as well as be fertilized by wild and weed beet. Since the crop, the wild beets, and the weed beets are the same species and intercross freely, the question of pollen flow is an important issue to determine the potential dispersal of transgenes from field to field and to wild habitats. We report here an experiment to describe pollen dispersal from a small herbicide-resistant sugar beet source towards male sterile target plants located along radiating lines up to 1,200 m away. Individual dispersal functions were inferred from statistical analyses and compared. Pollen limitation, as expected in root-production fields, was confirmed at all the distances from the pollen source. The number of resistant seeds produced by bait plants best fitted a fat-tailed probability distribution curve of pollen grains (power-law) dependent on the distance from the pollen source. A literature survey confirmed that power-law function could fit in most cases. The b coefficient was lower than 2. The number of fertilized flowers by background (herbicide-susceptible) pollen grains was uniform across the whole field. Airborne pollen had a fertilization impact equivalent to that of one adjacent bolter. The individual dispersal function from different pollen sources can be integrated to provide the pollen cloud composition for a given target plant, thus allowing modeling of gene flow in a field, inter-fields in a small region, and also in seed-production area. Long-distance pollen flow is not negligible and could play an important role in rapid transgene dispersal from crop to wild and weed beets in the landscape. The removing of any bolting, herbicide-resistant sugar beet should be compulsory to prevent the occurrence of herbicide-resistant weed beet, thus preventing gene flow to wild

  6. Honey bees preferentially consume freshly-stored pollen.

    Science.gov (United States)

    Carroll, Mark J; Brown, Nicholas; Goodall, Craig; Downs, Alexandra M; Sheenan, Timothy H; Anderson, Kirk E

    2017-01-01

    Honey bees (Apis mellifera) collect and store both honey and pollen in preserved forms. Pollen storage involves the addition of honey or nectar and oral secretions to pollen granules. It is controversial whether the duration of pollen storage alters the palatability or nutritive value of the pollen storage medium. We examined how bees utilize different-aged stored pollen during an extended pollen flow. The deposition of pollen into wax cells and subsequent consumption were monitored daily on 18 brood frames from 6 colonies over an 8d observation period. Despite a greater abundance of older stored pollen cells on brood frames, bees showed a marked preference for the consumption of freshly-stored pollen. Two to four day-old pollen cell contents were significantly more likely to be consumed, while pollen cell contents more than seven days old were eaten at much lower rates. Similar experiments that controlled for cell abundance and spatial effects using cage assays yielded the same result. One day-old stored pollen was consumed approximately three times more often than 10d-old stored pollen, and two times more often than 5d-old stored pollen. These consumption preferences for freshly-stored pollen occurred despite a lack of clear developmental advantages. Young adult workers reared for 7 days on 1d-, 5d-, or 10d-old stored pollen showed no difference in body mass, stored pollen consumption, hindgut fecal material accumulation, or hypopharyngeal gland (HPG) protein titers, suggesting that different-aged pollen stores did not vary in their nutritional value to adult bees. These findings are inconsistent with the hypothesis promoting a period of microbially-mediated, "beebread maturation" that results in greater palatability or nutritive value for aged pollen stores. Rather, stored pollen that is not eaten in the first few days accumulates as excess stores preserved in a less preferred, but nutritionally-similar state.

  7. Mars Science Laboratory Sample Acquisition, Sample Processing and Handling Subsystem: A Description of the Sampling Functionality of the System after being on the Surface for Two Years.

    Science.gov (United States)

    Beegle, L. W.; Anderson, R. C.; Abbey, W. J.

    2014-12-01

    The Sample Acquisition/Sample Processing and Handling (SA/SPaH) subsystem for the Mars Science Library (MSL) is a rover-based sampling system. SA/SPaH consists of a powdering drill and a scooping, sieving, and portioning device mounted on a turret at the end of a robotic arm. Curiosity rover preformed several sample acquisitions and processing of solid samples during its first year of operation. Material were processed and delivered to the two analytical instruments, Chemistry and Mineralogy (CheMin) and Sample Analysis at Mars (SAM), both of which required specific particle size for the material delivered to them to perform their analysis to determine its mineralogy and geochemistry content. In this presentation, the functionality of the system will be explained along with the in-situ targets the system has acquire and the samples that were delivered.

  8. Bee plant inventory and the pollen potentiality of Menagesha Suba ...

    African Journals Online (AJOL)

    The study was designed with the objectives of assessing the pollen yielding plant species and to establish, the flowering phenology of bee plants. Pollen was collected from the zander beehives using the pollen trap fitted to the entrance of beehives for two years. The pollen was identified using light microscope with a 400x ...

  9. Alnus as a disturbing factor in pollen diagrams

    NARCIS (Netherlands)

    Janssen, C.R.

    1959-01-01

    It is commonly accepted that percentages of pollen in a pollen diagram do not express the exact composition of forests in earlier times. This inaccuracy is due to several factors, for instance the different quantities of pollen produced by plants, the distance of transport etc. A pollen diagram

  10. In vitro pollen quantity, viability and germination tests in quince ...

    African Journals Online (AJOL)

    Quince (Cydonia oblonga Mill.) cvs. Ekmek, Esme, Limon, Ege 2, Ege 22, Ege 25 and Quince-A rootstock pollens were collected in April from the unopened pink balloon-stage flowers on mature trees. The pollen amount was between 20063 pollen/flower ('Ege 25') and 11906 pollen/flower ('Limon') with hemacytometer.

  11. Uncertainty analysis of point-by-point sampling complex surfaces using touch probe CMMs DOE for complex surfaces verification with CMM

    DEFF Research Database (Denmark)

    Barini, Emanuele Modesto; Tosello, Guido; De Chiffre, Leonardo

    2010-01-01

    The paper describes a study concerning point-by-point sampling of complex surfaces using tactile CMMs. A four factor, two level completely randomized factorial experiment was carried out, involving measurements on a complex surface configuration item comprising a sphere, a cylinder and a cone, co...

  12. Correction of Sampling Errors in Ocean Surface Cross-Sectional Estimates from Nadir-Looking Weather Radar

    Science.gov (United States)

    Caylor, I. Jeff; Meneghini, R.; Miller, L. S.; Heymsfield, G. M.

    1997-01-01

    The return from the ocean surface has a number of uses for airborne meteorological radar. The normalized surface cross section has been used for radar system calibration, estimation of surface winds, and in algorithms for estimating the path-integrated attenuation in rain. However, meteorological radars are normally optimized for observation of distributed targets that fill the resolution volume, and so a point target such as the surface can be poorly sampled, particularly at near-nadir look angles. Sampling the nadir surface return at an insufficient rate results in a negative bias of the estimated cross section. This error is found to be as large as 4 dB using observations from a high-altitude airborne radar. An algorithm for mitigating the error is developed that is based upon the shape of the surface echo and uses the returned signal at the three range gates nearest the peak surface echo.

  13. Double modulation pyrometry: A radiometric method to measure surface temperatures of directly irradiated samples

    Science.gov (United States)

    Potamias, Dimitrios; Alxneit, Ivo; Wokaun, Alexander

    2017-09-01

    The design, implementation, calibration, and assessment of double modulation pyrometry to measure surface temperatures of radiatively heated samples in our 1 kW imaging furnace is presented. The method requires that the intensity of the external radiation can be modulated. This was achieved by a rotating blade mounted parallel to the optical axis of the imaging furnace. Double modulation pyrometry independently measures the external radiation reflected by the sample as well as the sum of thermal and reflected radiation and extracts the thermal emission as the difference of these signals. Thus a two-step calibration is required: First, the relative gains of the measured signals are equalized and then a temperature calibration is performed. For the latter, we transfer the calibration from a calibrated solar blind pyrometer that operates at a different wavelength. We demonstrate that the worst case systematic error associated with this procedure is about 300 K but becomes negligible if a reasonable estimate of the sample's emissivity is used. An analysis of the influence of the uncertainties in the calibration coefficients reveals that one (out of the five) coefficient contributes almost 50% to the final temperature error. On a low emission sample like platinum, the lower detection limit is around 1700 K and the accuracy typically about 20 K. Note that these moderate specifications are specific for the use of double modulation pyrometry at the imaging furnace. It is mainly caused by the difficulty to achieve and maintain good overlap of the hot zone with a diameter of about 3 mm Full Width at Half Height and the measurement spot both of which are of similar size.

  14. Geochemical signature of land-based activities in Caribbean coral surface samples

    Science.gov (United States)

    Prouty, N.G.; Hughen, K.A.; Carilli, J.

    2008-01-01

    Anthropogenic threats, such as increased sedimentation, agrochemical run-off, coastal development, tourism, and overfishing, are of great concern to the Mesoamerican Caribbean Reef System (MACR). Trace metals in corals can be used to quantify and monitor the impact of these land-based activities. Surface coral samples from the MACR were investigated for trace metal signatures resulting from relative differences in water quality. Samples were analyzed at three spatial scales (colony, reef, and regional) as part of a hierarchical multi-scale survey. A primary goal of the paper is to elucidate the extrapolation of information between fine-scale variation at the colony or reef scale and broad-scale patterns at the regional scale. Of the 18 metals measured, five yielded statistical differences at the colony and/or reef scale, suggesting fine-scale spatial heterogeneity not conducive to regional interpretation. Five metals yielded a statistical difference at the regional scale with an absence of a statistical difference at either the colony or reef scale. These metals are barium (Ba), manganese (Mn), chromium (Cr), copper (Cu), and antimony (Sb). The most robust geochemical indicators of land-based activities are coral Ba and Mn concentrations, which are elevated in samples from the southern region of the Gulf of Honduras relative to those from the Turneffe Islands. These findings are consistent with the occurrence of the most significant watersheds in the MACR from southern Belize to Honduras, which contribute sediment-laden freshwater to the coastal zone primarily as a result of human alteration to the landscape (e.g., deforestation and agricultural practices). Elevated levels of Cu and Sb were found in samples from Honduras and may be linked to industrial shipping activities where copper-antimony additives are commonly used in antifouling paints. Results from this study strongly demonstrate the impact of terrestrial runoff and anthropogenic activities on coastal water

  15. Evaluation of the physicochemical and functional properties of Colombian bee pollen

    Directory of Open Access Journals (Sweden)

    Carlos Fuenmayor B.

    2014-03-01

    Full Text Available Objective. To establish current knowledge about Colombian bee-pollen from a point of view nutritional and functional, contributing towards creating national technical standards and the identification of chemical differentiation factors for further researches. Material and methods. One hundred ninety-six samples of dried bee pollen were collected in the center region of Colombia known as Cundi-boyacense high plateau, where nearly 90% of total bee pollen production is concentrated in this country. Performed physicochemical analyses in this study were: moisture, pH, acidity, ash, carbohydrates, lipids, proteins, dietary fiber, fatty acid profile and mineral elements. Results. Bee pollen from this region had 7.7±5.2 g/100 g moisture content, and a following centesimal composition based on dry matter: ashes 2.5±0.4 g; lipids 6.90±3.5 g; proteins 23.8±3.2 g and total dietary fiber 14.5±3.5 g. The most abundant fatty acids were α-linolenic, palmitic and linoleic. Carbohydrates were the main components and fructose and glucose the most concentrated sugars. The predominant minerals assessed here were potassium, calcium and magnesium. The results were also discussed in terms of the characteristics found in Colombian bee-pollen in comparison to international regulations and findings for other varieties of commercial bee-pollen from eight different countries. Conclusions. The results found in this study suggest that bee-pollen may be used as a dietary supplement and agree with bibliographical reports and international regulations. Such characterization will enable to be proposed technical standards in line with Colombian bee-pollen properties and it is expected to improve marketing and production chain conditions.

  16. Liquid Nitrogen (-196°C effect under pollen of some cultured or ornamental species

    Directory of Open Access Journals (Sweden)

    Sabina GLIGOR

    2006-05-01

    Full Text Available The criopreservation involve the stock of the vegetal material at low temperatures (-196°C in liquid nitrogen, in thermal conditions in which the division of cells and metabolic processes slow down, thus that the samplings may be conserved for long periods without suffering any genetic modifications. This stock technique is applied till present only on 80 vegetal species, keeping their seeds and vitrocultures preponderantly; researches were made regarding the maintenance of pollen in liquid nitrogen.The mature pollen, able to resist a higher degree of desiccation, may be conserved at low temperatures, without criopreservation. It was made researches on criopreservation of rise, maize, wheat, roses, sun flower and soy pollen. Our study purpose was to follow the impact of liquid nitrogen (-196°C about on viability of some cultured and ornamental species. The designed time of criopreservation it was 30 minutes and 7 days, using the TTC (tripheniltetrazole chloride method which allows testing the viability of vegetal material based on dehydrogenase activity.It was observed at Petunia hybrida species, that the pollen viability was low - in relevance with the witness represented from the pollen which was not resigned to the nitrogen liquid treatment - between percentage limits of 3.5-8%, in the case when the vegetal material was submersed 30 minutes in liquid nitrogen and 7.5-14.5% 7 days at (-196°C. The submersing of Nicotiana alata var. grandiflora species at 7 days, determined a low viability with 11.53%. The following two studied species Cucurbita and Hosta were proved to be the most resistant at submersing and maintenance in liquid nitrogen. The most affected pollen was Campsis radicans species. At Datura stramonium species was observed 2.59% a low viability of pollen, after 30 minutes of liquid nitrogen treatment, was 19.56%, after 7 days of submersing, the most pollen granules losing completely their viability.

  17. Pulmonary lobe segmentation based on ridge surface sampling and shape model fitting

    International Nuclear Information System (INIS)

    Ross, James C.; Kindlmann, Gordon L.; Okajima, Yuka; Hatabu, Hiroto; Díaz, Alejandro A.; Silverman, Edwin K.; Washko, George R.; Dy, Jennifer; Estépar, Raúl San José

    2013-01-01

    Purpose: Performing lobe-based quantitative analysis of the lung in computed tomography (CT) scans can assist in efforts to better characterize complex diseases such as chronic obstructive pulmonary disease (COPD). While airways and vessels can help to indicate the location of lobe boundaries, segmentations of these structures are not always available, so methods to define the lobes in the absence of these structures are desirable. Methods: The authors present a fully automatic lung lobe segmentation algorithm that is effective in volumetric inspiratory and expiratory computed tomography (CT) datasets. The authors rely on ridge surface image features indicating fissure locations and a novel approach to modeling shape variation in the surfaces defining the lobe boundaries. The authors employ a particle system that efficiently samples ridge surfaces in the image domain and provides a set of candidate fissure locations based on the Hessian matrix. Following this, lobe boundary shape models generated from principal component analysis (PCA) are fit to the particles data to discriminate between fissure and nonfissure candidates. The resulting set of particle points are used to fit thin plate spline (TPS) interpolating surfaces to form the final boundaries between the lung lobes. Results: The authors tested algorithm performance on 50 inspiratory and 50 expiratory CT scans taken from the COPDGene study. Results indicate that the authors' algorithm performs comparably to pulmonologist-generated lung lobe segmentations and can produce good results in cases with accessory fissures, incomplete fissures, advanced emphysema, and low dose acquisition protocols. Dice scores indicate that only 29 out of 500 (5.85%) lobes showed Dice scores lower than 0.9. Two different approaches for evaluating lobe boundary surface discrepancies were applied and indicate that algorithm boundary identification is most accurate in the vicinity of fissures detectable on CT. Conclusions: The proposed

  18. Pulmonary lobe segmentation based on ridge surface sampling and shape model fitting

    Energy Technology Data Exchange (ETDEWEB)

    Ross, James C., E-mail: jross@bwh.harvard.edu [Channing Laboratory, Brigham and Women' s Hospital, Boston, Massachusetts 02215 (United States); Surgical Planning Lab, Brigham and Women' s Hospital, Boston, Massachusetts 02215 (United States); Laboratory of Mathematics in Imaging, Brigham and Women' s Hospital, Boston, Massachusetts 02126 (United States); Kindlmann, Gordon L. [Computer Science Department and Computation Institute, University of Chicago, Chicago, Illinois 60637 (United States); Okajima, Yuka; Hatabu, Hiroto [Department of Radiology, Brigham and Women' s Hospital, Boston, Massachusetts 02215 (United States); Díaz, Alejandro A. [Pulmonary and Critical Care Division, Brigham and Women' s Hospital and Harvard Medical School, Boston, Massachusetts 02215 and Department of Pulmonary Diseases, Pontificia Universidad Católica de Chile, Santiago (Chile); Silverman, Edwin K. [Channing Laboratory, Brigham and Women' s Hospital, Boston, Massachusetts 02215 and Pulmonary and Critical Care Division, Brigham and Women' s Hospital and Harvard Medical School, Boston, Massachusetts 02215 (United States); Washko, George R. [Pulmonary and Critical Care Division, Brigham and Women' s Hospital and Harvard Medical School, Boston, Massachusetts 02215 (United States); Dy, Jennifer [ECE Department, Northeastern University, Boston, Massachusetts 02115 (United States); Estépar, Raúl San José [Department of Radiology, Brigham and Women' s Hospital, Boston, Massachusetts 02215 (United States); Surgical Planning Lab, Brigham and Women' s Hospital, Boston, Massachusetts 02215 (United States); Laboratory of Mathematics in Imaging, Brigham and Women' s Hospital, Boston, Massachusetts 02126 (United States)

    2013-12-15

    Purpose: Performing lobe-based quantitative analysis of the lung in computed tomography (CT) scans can assist in efforts to better characterize complex diseases such as chronic obstructive pulmonary disease (COPD). While airways and vessels can help to indicate the location of lobe boundaries, segmentations of these structures are not always available, so methods to define the lobes in the absence of these structures are desirable. Methods: The authors present a fully automatic lung lobe segmentation algorithm that is effective in volumetric inspiratory and expiratory computed tomography (CT) datasets. The authors rely on ridge surface image features indicating fissure locations and a novel approach to modeling shape variation in the surfaces defining the lobe boundaries. The authors employ a particle system that efficiently samples ridge surfaces in the image domain and provides a set of candidate fissure locations based on the Hessian matrix. Following this, lobe boundary shape models generated from principal component analysis (PCA) are fit to the particles data to discriminate between fissure and nonfissure candidates. The resulting set of particle points are used to fit thin plate spline (TPS) interpolating surfaces to form the final boundaries between the lung lobes. Results: The authors tested algorithm performance on 50 inspiratory and 50 expiratory CT scans taken from the COPDGene study. Results indicate that the authors' algorithm performs comparably to pulmonologist-generated lung lobe segmentations and can produce good results in cases with accessory fissures, incomplete fissures, advanced emphysema, and low dose acquisition protocols. Dice scores indicate that only 29 out of 500 (5.85%) lobes showed Dice scores lower than 0.9. Two different approaches for evaluating lobe boundary surface discrepancies were applied and indicate that algorithm boundary identification is most accurate in the vicinity of fissures detectable on CT. Conclusions: The

  19. Pollen

    Science.gov (United States)

    ... About NIEHS Home Page Office of the Director Organizational Structure 2018-2023 Strategic Plan Advisory Boards & Councils Community ... Home Page About NIEHS Office of the Director Organizational Structure 2018-2023 Strategic Plan Advisory Boards & Councils Community ...

  20. Pollen Viability of Aeschynanthus tricolor Hook.

    Directory of Open Access Journals (Sweden)

    Vitri Garvita Gandadikusumah

    2017-04-01

    Full Text Available Aeschynanthus (Gesneriaceae is climbing or trailing epiphytes from the tropical forests of South-East Asia. Several species are widely cultivated for their attractive flowers, which usually scarlet with long corolla tubes and probably bird pollinated.This study was carried out on Aeschynanthus tricolor Hook. to determine in vitro germinability of (1 pollen collected from flowers at anthesis, on the day before anthesis, or up to five days after anthesis and (2 pollen collected on the day of anthesis and then stored at -20oC for 127 days. Germinability tests were carried out on pollen grains after stored for four hours in 10% sucrose solution. The highest in vitro germination percentage observed was pollen collected on the day of anthesis (96.3% and the lowest was pollen collected on the fifth day after anthesis (5.6%. The germination percentage of pollen after stored at -20oC was 98% at beginning and 22% after 127 days. From this research we can conclude that pollen of A. tricolor can be successfully collected and then stored for some time, will be practical benefit for plant breeding and conservation purposes.

  1. Contents and Sample Arguments of a Safety Case for Near Surface Disposal of Radioactive Waste

    International Nuclear Information System (INIS)

    2017-06-01

    This publication arises from the results of two projects to assist Member States in understanding and developing safety cases for near-surface radioactive waste disposal facilities. The objective of the publication is to give detailed information on the contents of safety cases for radioactive waste disposal and the types of arguments that may be included. It is written for technical experts preparing a safety case, and decision makers in the regulatory body and government. The publication outlines the key uses and aspects of the safety case, its evolution in parallel with that of the disposal facility, the key decision steps in the development of the waste disposal facility, the components of the safety case, their place in the Matrix of Arguments for a Safety Case (the MASC matrix), and a detailed description of the development of sample arguments that might be included in a safety case for each of two hypothetical radioactive waste disposal facilities.

  2. Self-organizing adaptive map: autonomous learning of curves and surfaces from point samples.

    Science.gov (United States)

    Piastra, Marco

    2013-05-01

    Competitive Hebbian Learning (CHL) (Martinetz, 1993) is a simple and elegant method for estimating the topology of a manifold from point samples. The method has been adopted in a number of self-organizing networks described in the literature and has given rise to related studies in the fields of geometry and computational topology. Recent results from these fields have shown that a faithful reconstruction can be obtained using the CHL method only for curves and surfaces. Within these limitations, these findings constitute a basis for defining a CHL-based, growing self-organizing network that produces a faithful reconstruction of an input manifold. The SOAM (Self-Organizing Adaptive Map) algorithm adapts its local structure autonomously in such a way that it can match the features of the manifold being learned. The adaptation process is driven by the defects arising when the network structure is inadequate, which cause a growth in the density of units. Regions of the network undergo a phase transition and change their behavior whenever a simple, local condition of topological regularity is met. The phase transition is eventually completed across the entire structure and the adaptation process terminates. In specific conditions, the structure thus obtained is homeomorphic to the input manifold. During the adaptation process, the network also has the capability to focus on the acquisition of input point samples in critical regions, with a substantial increase in efficiency. The behavior of the network has been assessed experimentally with typical data sets for surface reconstruction, including suboptimal conditions, e.g. with undersampling and noise. Copyright © 2012 Elsevier Ltd. All rights reserved.

  3. Comparison of sampling methods to recover germinated Bacillus anthracis and Bacillus thuringiensis endospores from surface coupons.

    Science.gov (United States)

    Mott, T M; Shoe, J L; Hunter, M; Woodson, A M; Fritts, K A; Klimko, C P; Quirk, A V; Welkos, S L; Cote, C K

    2017-05-01

    In an attempt to devise decontamination methods that are both effective and minimally detrimental to the environment, we evaluated germination induction as an enhancement to strategies for Bacillus anthracis spore decontamination. To determine an optimal method for the recovery of germinating spores from different matrices, it was critical to ensure that the sampling procedures did not negatively impact the viability of the germinating spores possibly confounding the results and downstream analyses of field trial data. Therefore, the two main objectives of this study were the following: (i) development of an effective processing protocol capable of recovering the maximum number of viable germinating or germinated spores from different surface materials; and (ii) using a model system of spore contamination, employ this protocol to evaluate the potential applicability of germination induction to wide-area decontamination of B. anthracis spores. We examined parameters affecting the sampling efficiencies of B. anthracis and the surrogate species Bacillus thuringiensis on nonporous and porous materials. The most efficient extraction from all matrices was observed using PBS with 0·01% Tween 80 extraction buffer. The addition of a sonication and/or extended vortex treatment did not yield significant increases in spore or germinated spore recovery. Our data demonstrate that previous germination-induction experiments performed in suspension can be reproduced when Bacillus spores are deposited onto reference surfaces materials. Our proof of concept experiment illustrated that a germination pretreatment step significantly improves conventional secondary decontamination strategies and remediation plans. Published 2017. This article is a U.S. Government work and is in the public domain in the USA.

  4. Development of a portable membrane contactor sampler for noble gas analyses of surface and groundwater samples

    Science.gov (United States)

    Matsumoto, T.; Han, L. H.; Jaklitsh, M.; Aggarwal, P. K.

    2012-04-01

    Noble gas isotopes dissolved in groundwater provide valuable information about climatic conditions during air-water exchange, as well as the residence time of groundwater and its renewal rate. The isotope composition of noble gases can also serve as geochemical fingerprints to decipher the origin of groundwater and its flow system. Conventionally, groundwater is sampled using a copper tube, which is subsequently degassed using a vacuum extraction system for isotope analysis by a mass spectrometer. Although this conventional and well-established way of sampling is widely recognised as being reliable and robust, a major drawback to this method is its size and weight. For example, our sampler consists of a copper tube of 10 mm diameter x 1000 mm length and a metal casing with pinch-off clamps with its total weight to be 2 kg each. A box of 24 samplers well exceeds 40 kg. Considering that sampling fields are not necessarily easily accessible by vehicle, taking hundreds of samples in the field is generally a tough task for everyone. There is a different type of sampler, which is comprised of a much smaller copper tube (6 mm in diameter and 100 mm long for our case) with clamps and a semi-permeable membrane filter. It is sunk into water and left there for dissolved gases to diffuse into the sampler until their concentrations in water become equilibrated with those in the tube. This diffusion sampler is small and easy to handle in the field; it has an advantage over conventional copper tubes, as the diffusion sampler collects gases so that there is no gas extraction process needed before isotope analysis. However, this method requires an equilibration time of 24 hours or more, which could result in lower time-efficiency for sampling work. In order to enable time-efficient and less-painstaking sampling of noble gases dissolved in surface and groundwater, we have developed a portable and self-powered sampling device specified to noble gas analysis by mass spectrometer

  5. Pollen, water, and wind: Chaotic mixing in a puddle of water

    DEFF Research Database (Denmark)

    Jensen, Kaare Hartvig

    2016-01-01

    This paper talks about how pine pollen grains dispersedin an approximately 1 m wide and 1 cm deep water puddle. The pollen has mixed due to wind blowing across the liquid surface, revealing a strikingly complex flow pattern. The flows revealed by nature’s tracer particles may influence circulation...... and nutrient distribution in puddles and small ponds.The flow patterns are generated by wind blowing across the puddle surface. This causes a shear stress at the atmospheric interface, which drives a flow in the liquid below. Chaotic mixing can occur if the wind direction changes over time. A fluid patch...

  6. A new pollen-derived microcarrier for pantoprazole delivery

    International Nuclear Information System (INIS)

    Akyuz, Lalehan; Sargin, Idris; Kaya, Murat; Ceter, Talip; Akata, Ilgaz

    2017-01-01

    Plant-derived carriers have emerged as promising materials for drug encapsulation. Especially, sporopollenin microcapsules extracted from diverse pollen species have been proved to be effective drug carriers due to their biocompatibility, homogeneity in size, resistance to harsh chemical conditions and high thermal stability. Here in this study, sporopollenin microcapsules were isolated successfully from the pollens of a common tree (Corylus avellana, the European hazelnut) and used as a carrier for pantoprazole (PaNa) (a proton pump inhibitor). The drug entrapment efficiency was recorded as 29.81%. SEM micrographs clearly showed the drug was loaded into the microcapsules through the apertures of microcapsule and also some drugs were adsorbed on the surface of microcapsules. FT-IR spectra analysis confirmed the drug loading. Thermogravimetric analysis revealed that thermal stability of PaNa was enhanced by encapsulation. In vitro release studies showed that PaNa-loaded sporopollenin microcapsules exhibited better release performance than the control. C. avellana sporopollenin microcapsules can make an efficient carrier for delivery of PaNa. - Highlights: • Morphologically intact microcapsules extracted from the pollens of Corylus avellana. • Pantoprazole was entrapped within the sporopollenin microcapsules. • The encapsulation efficiency by passive loading technique was found to be 28.81%. • Drug-loaded microcapsules exhibited better release performance than the drug itself.

  7. Data Validation Package - April and July 2015 Groundwater and Surface Water Sampling at the Gunnison, Colorado, Processing Site

    Energy Technology Data Exchange (ETDEWEB)

    Linard, Joshua [Dept. of Energy (DOE), Washington, DC (United States). Office of Legacy Management; Campbell, Sam [Navarro Research and Engineering, Inc., Oak Ridge, TN (United States)

    2016-02-01

    This event included annual sampling of groundwater and surface water locations at the Gunnison, Colorado, Processing Site. Sampling and analyses were conducted as specified in Sampling and Analysis Plan for U.S. Department of Energy Office of Legacy Management Sites. Samples were collected from 28 monitoring wells, three domestic wells, and six surface locations in April at the processing site as specified in the 2010 Ground Water Compliance Action Plan for the Gunnison, Colorado, Processing Site. Domestic wells 0476 and 0477 were sampled in July because the homes were unoccupied in April, and the wells were not in use. Duplicate samples were collected from locations 0113, 0248, and 0477. One equipment blank was collected during this sampling event. Water levels were measured at all monitoring wells that were sampled. No issues were identified during the data validation process that requires additional action or follow-up.

  8. Bee Pollen: Chemical Composition and Therapeutic Application

    Directory of Open Access Journals (Sweden)

    Katarzyna Komosinska-Vassev

    2015-01-01

    Full Text Available Bee pollen is a valuable apitherapeutic product greatly appreciated by the natural medicine because of its potential medical and nutritional applications. It demonstrates a series of actions such as antifungal, antimicrobial, antiviral, anti-inflammatory, hepatoprotective, anticancer immunostimulating, and local analgesic. Its radical scavenging potential has also been reported. Beneficial properties of bee pollen and the validity for their therapeutic use in various pathological condition have been discussed in this study and with the currently known mechanisms, by which bee pollen modulates burn wound healing process.

  9. A New Instrument to Measure the Surface Resistance of Superconducting Samples at 400 MHz

    CERN Document Server

    Mahner, E; Chiaveri, Enrico; Häbel, E; Tessier, J M

    2003-01-01

    A 400-MHz niobium quadrupole resonator has been manufactured to study the rf properties of superconducting bulk and thin film samples at low temperatures. We describe the apparatus, i.e. the construction of the resonator, field calculations with MAFIA, and the experimental procedure. In first validation tests the surface resistance Rs of a reactor-grade bulk niobium sample as a function of temperature and applied rf field has been investigated by using a calorimetric "rf-dc-compensation" method. A critical temperature Tc = 9.15 ± 0.02 K, a thermal conductivity λ (4.2 K) = 6.9 ± 0.7 W/mK, a residual resistance Rres = 19.0 ± 0.3 nΩ and a superconducting energy gap of ∆/kBTc = 1.82 ± 0.01 have been measured. At 4.2 K we achieved a calorimetric detection limit for Rs of 0.16 nΩ at a peak field of 25 mT.

  10. Antibacterial activity of marine culturable bacteria collected from a global sampling of ocean surface waters and surface swabs of marine organisms

    DEFF Research Database (Denmark)

    Gram, Lone; Melchiorsen, Jette; Bruhn, Jesper Bartholin

    2010-01-01

    The purpose of the present study was to isolate marine culturable bacteria with antibacterial activity and hence a potential biotechnological use. Seawater samples (244) and 309 swab samples from biotic or abiotic surfaces were collected on a global Danish marine research expedition (Galathea 3......). Total cell counts at the seawater surface were 5 × 105 to 106 cells/ml, of which 0.1–0.2% were culturable on dilute marine agar (20°C). Three percent of the colonies cultured from seawater inhibited Vibrio anguillarum, whereas a significantly higher proportion (13%) of colonies from inert or biotic...... surfaces was inhibitory. It was not possible to relate a specific kind of eukaryotic surface or a specific geographic location to a general high occurrence of antagonistic bacteria. Five hundred and nineteen strains representing all samples and geographic locations were identified on the basis of partial...

  11. A high-throughput FTIR spectroscopy approach to assess adaptive variation in the chemical composition of pollen.

    Science.gov (United States)

    Zimmermann, Boris; Bağcıoğlu, Murat; Tafinstseva, Valeria; Kohler, Achim; Ohlson, Mikael; Fjellheim, Siri

    2017-12-01

    The two factors defining male reproductive success in plants are pollen quantity and quality, but our knowledge about the importance of pollen quality is limited due to methodological constraints. Pollen quality in terms of chemical composition may be either genetically fixed for high performance independent of environmental conditions, or it may be plastic to maximize reproductive output under different environmental conditions. In this study, we validated a new approach for studying the role of chemical composition of pollen in adaptation to local climate. The approach is based on high-throughput Fourier infrared (FTIR) characterization and biochemical interpretation of pollen chemical composition in response to environmental conditions. The study covered three grass species, Poa alpina , Anthoxanthum odoratum , and Festuca ovina . For each species, plants were grown from seeds of three populations with wide geographic and climate variation. Each individual plant was divided into four genetically identical clones which were grown in different controlled environments (high and low levels of temperature and nutrients). In total, 389 samples were measured using a high-throughput FTIR spectrometer. The biochemical fingerprints of pollen were species and population specific, and plastic in response to different environmental conditions. The response was most pronounced for temperature, influencing the levels of proteins, lipids, and carbohydrates in pollen of all species. Furthermore, there is considerable variation in plasticity of the chemical composition of pollen among species and populations. The use of high-throughput FTIR spectroscopy provides fast, cheap, and simple assessment of the chemical composition of pollen. In combination with controlled-condition growth experiments and multivariate analyses, FTIR spectroscopy opens up for studies of the adaptive role of pollen that until now has been difficult with available methodology. The approach can easily be

  12. Characteristics of T-cell and B-cell immune respoonses to pollen allergens in Bulgarian patients with pollinosis

    Directory of Open Access Journals (Sweden)

    ZHIVKA KOSTOVA

    2015-12-01

    Full Text Available Characterization of the pollen allergens and identification of the main T-cell and B-cell epitopes is of crucial importance, since the clarification of the cellular and molecular mechanisms will allow long-term control of this type allergic diseases and development of safe immunotherapeutic medication. The objective of this study was to identify which pollen allergens are responsible for the T-cell activation in atopic patients with pollinosis and to determine whether the same allergens are responsible for the IgE-mediated reactions. Thirty-seven patients with pollinosis and thirteen non-allergic subjects were recruited. Peripheral blood samples were collected out of the pollen season. T-cell responses (IFN-γ production towards different pollen allergens and levels of pollen specific IgE and IgG in the sera were measured by ELISA. The T-cell reactivity in most patients was directed towards the grass pollen B1, tree pollen I and autumn pollen B5. 70% of the allergic individuals responded to allergens from Lolium perenne, 84% to Dactylis glomerata, 11% to Phleum pratense, 65% to Betula pendula and 70% to Taxus baccata. Elevated serum levels of specific IgE in the allergic patients (p<0.01 were measured against the tree pollen I and autumn pollen, which include widespread deciduous trees (birch, willow, poplar and yew and Artemisia absinthium, respectively. Our results show that the T-cell reactivity and antibody responses may be directed towards different or the same allergens. In addition, we propose that short synthetic peptides, which contain overlapping T- and B-cell epitopes can be used for specific immunotherapy treatment if they lack antibody recognition domains.

  13. Physicochemical transformation and algal toxicity of engineered nanoparticles in surface water samples

    International Nuclear Information System (INIS)

    Zhang, Luqing; Li, Jingyi; Yang, Kun; Liu, Jingfu; Lin, Daohui

    2016-01-01

    Most studies on the behavior and toxicity of engineered nanoparticles (NPs) have been conducted in artificial water with well-controlled conditions, which are dramatically different from natural waters with complex compositions. To better understand the fate and toxicity of NPs in the natural water environment, physicochemical transformations of four NPs (TiO 2 , ZnO, Ag, and carbon nanotubes (CNTs)) and their toxicities towards a unicellular green alga (Chlorella pyrenoidosa) in four fresh water and one seawater sample were investigated. Results indicated that water chemistry had profound effects on aggregation, dissolution, and algal toxicity of the NPs. The strongest homoaggregation of the NPs was associated with the highest ionic strength, but no obvious correlation was observed between the homoaggregation of NPs and pH or dissolved organic matter content of the water samples. The greatest dissolution of ZnO NPs also occurred in seawater with the highest ionic strength, while the dissolution of Ag NPs varied differently from ZnO NPs. The released Zn 2+ and especially Ag + mainly accounted for the algal toxicity of ZnO and Ag NPs, respectively. The NP-cell heteroagglomeration occurred generally for CNTs and Ag NPs, which contributed to the observed nanotoxicity. However, there was no significant correlation between the observed nanotoxicity and the type of NP or the water chemistry. It was thus concluded that the physicochemical transformations and algal toxicities of NPs in the natural water samples were caused by the combined effects of complex water quality parameters rather than any single influencing factor alone. These results will increase our knowledge on the fate and effects of NPs in the aquatic environment. - Highlights: • Transformation and algal toxicity of four NPs in five surface water samples were studied. • The transformation and toxicity were dependent on the types of NPs and water samples. • No single water parameter alone was

  14. Evaluation and Prediction present of radionuclide for surface wipe sample in Emergency Related with Fukushima Nuclear Accident

    International Nuclear Information System (INIS)

    Zalina Laili; Muhamat Omar; Woo, Y.M.

    2011-01-01

    Surface wipe samples of aircraft and container from Japan that were exposed to radioactive dust fallout due to Fukushima nuclear accident has been analysed using gamma spectrometry systems. The samples were analysed to determine their contamination levels. The surface of aircraft and container might be exposed to short and long lived fission and activation products. Thus, good evaluations, as well as a reliable and reasonable judgment were needed in order to determine the presence of fission and activation products. A work procedure has been developed to evaluate and predict the presence of fission and activation products in surface wipe samples. Good references, skilled and experienced level in analysis, a well calibrated and validated detector system were the important factors in determining the presence of fission and activation products in surface wipe samples. (author)

  15. Surface wipe sampling for antineoplastic (chemotherapy) and other hazardous drug residue in healthcare settings: Methodology and recommendations.

    Science.gov (United States)

    Connor, Thomas H; Zock, Matthew D; Snow, Amy H

    2016-09-01

    Surface wipe sampling for various hazardous agents has been employed in many occupational settings over the years for various reasons such as evaluation of potential dermal exposure and health risk, source determination, quality or cleanliness, compliance, and others. Wipe sampling for surface residue of antineoplastic and other hazardous drugs in healthcare settings is currently the method of choice to determine surface contamination of the workplace with these drugs. The purpose of this article is to review published studies of wipe sampling for antineoplastic and other hazardous drugs, to summarize the methods in use by various organizations and researchers, and to provide some basic guidance for conducting surface wipe sampling for these drugs in healthcare settings.  Recommendations on wipe sampling methodology from several government agencies and organizations were reviewed. Published reports on wipe sampling for hazardous drugs in numerous studies were also examined. The critical elements of a wipe sampling program and related limitations were reviewed and summarized.  Recommendations and guidance are presented concerning the purposes of wipe sampling for antineoplastic and other hazardous drugs in the healthcare setting, technical factors and variables, sampling strategy, materials required, and limitations. The reporting and interpretation of wipe sample results is also discussed.  It is recommended that all healthcare settings where antineoplastic and other hazardous drugs are handled consider wipe sampling as part of a comprehensive hazardous drug "safe handling" program. Although no standards exist for acceptable or allowable surface concentrations for these drugs in the healthcare setting, wipe sampling may be used as a method to characterize potential occupational dermal exposure risk and to evaluate the effectiveness of implemented controls and the overall safety program. A comprehensive safe-handling program for antineoplastic drugs may

  16. A surface science compatible epifluorescence microscope for inspection of samples under ultra high vacuum and cryogenic conditions.

    Science.gov (United States)

    Marquardt, Christian; Paulheim, Alexander; Rohbohm, Nils; Merkel, Rudolf; Sokolowski, Moritz

    2017-08-01

    We modified an epi-illumination light microscope and mounted it on an ultra high vacuum chamber for investigating samples used in a surface science experiment. For easy access and bake out, all optical components are placed outside the vacuum and the sample is imaged through a glass window. The microscope can be operated in reflection brightfield or epifluorescence mode to image the sample surface or fluorescent dye molecules adsorbed on it. The homemade sample mounting was made compatible for the use under the microscope; sample temperatures as low as 6 K can be achieved. The performance of the microscope is demonstrated on two model samples: Brightfield-images of a well-prepared Ag(100) surface show a macroscopic corrugation of the surface, although low energy electron diffraction data indicate a highly ordered crystalline surface. The surface shows macroscopic protrusions with flat regions, about 20-200 μm in diameter, in between. Fluorescence images of diluted 3,4,9,10-perylene tetracarboxylicacid dianhydride (PTCDA) molecules adsorbed on an ultrathin epitaxial KCl film on the Ag(100) surface show a shading effect at surface protrusions due to an inclined angle of incidence of the PTCDA beam during deposition. For some preparations, the distribution of the fluorescence intensity is inhomogeneous and shows a dense network of bright patches about 5 μm in diameter related to the macroscopic corrugation of the surface. We propose that such a light microscope can aid many surface science experiments, especially those dealing with epitaxial growth or fluorescent materials.

  17. A surface science compatible epifluorescence microscope for inspection of samples under ultra high vacuum and cryogenic conditions

    Science.gov (United States)

    Marquardt, Christian; Paulheim, Alexander; Rohbohm, Nils; Merkel, Rudolf; Sokolowski, Moritz

    2017-08-01

    We modified an epi-illumination light microscope and mounted it on an ultra high vacuum chamber for investigating samples used in a surface science experiment. For easy access and bake out, all optical components are placed outside the vacuum and the sample is imaged through a glass window. The microscope can be operated in reflection brightfield or epifluorescence mode to image the sample surface or fluorescent dye molecules adsorbed on it. The homemade sample mounting was made compatible for the use under the microscope; sample temperatures as low as 6 K can be achieved. The performance of the microscope is demonstrated on two model samples: Brightfield-images of a well-prepared Ag(100) surface show a macroscopic corrugation of the surface, although low energy electron diffraction data indicate a highly ordered crystalline surface. The surface shows macroscopic protrusions with flat regions, about 20-200 μm in diameter, in between. Fluorescence images of diluted 3,4,9,10-perylene tetracarboxylicacid dianhydride (PTCDA) molecules adsorbed on an ultrathin epitaxial KCl film on the Ag(100) surface show a shading effect at surface protrusions due to an inclined angle of incidence of the PTCDA beam during deposition. For some preparations, the distribution of the fluorescence intensity is inhomogeneous and shows a dense network of bright patches about 5 μm in diameter related to the macroscopic corrugation of the surface. We propose that such a light microscope can aid many surface science experiments, especially those dealing with epitaxial growth or fluorescent materials.

  18. False negative rate and other performance measures of a sponge-wipe surface sampling method for low contaminant concentrations.

    Energy Technology Data Exchange (ETDEWEB)

    Einfeld, Wayne; Krauter, Paula A.; Boucher, Raymond M.; Tezak, Mathew; Amidan, Brett G. (Pacific Northwest National Laboratory, Richland, WA); Piepel, Greg F. (Pacific Northwest National Laboratory, Richland, WA)

    2011-05-01

    Recovery of spores from environmental surfaces is known to vary due to sampling methodology, techniques, spore size and characteristics, surface materials, and environmental conditions. A series of tests were performed to evaluate a new, validated sponge-wipe method. Specific factors evaluated were the effects of contaminant concentrations and surface materials on recovery efficiency (RE), false negative rate (FNR), limit of detection (LOD) - and the uncertainties of these quantities. Ceramic tile and stainless steel had the highest mean RE values (48.9 and 48.1%, respectively). Faux leather, vinyl tile, and painted wood had mean RE values of 30.3, 25.6, and 25.5, respectively, while plastic had the lowest mean RE (9.8%). Results show a roughly linear dependence of surface roughness on RE, where the smoothest surfaces have the highest mean RE values. REs were not influenced by the low spore concentrations tested (3 x 10{sup -3} to 1.86 CFU/cm{sup 2}). The FNR data were consistent with RE data, showing a trend of smoother surfaces resulting in higher REs and lower FNRs. Stainless steel generally had the lowest mean FNR (0.123) and plastic had the highest mean FNR (0.479). The LOD{sub 90} varied with surface material, from 0.015 CFU/cm{sup 2} on stainless steel up to 0.039 on plastic. Selecting sampling locations on the basis of surface roughness and using roughness to interpret spore recovery data can improve sampling. Further, FNR values, calculated as a function of concentration and surface material, can be used pre-sampling to calculate the numbers of samples for statistical sampling plans with desired performance, and post-sampling to calculate the confidence in characterization and clearance decisions.

  19. [A new counting method for airborne Japanese red cedar and grass pollen allergens by the immunoblotting technique].

    Science.gov (United States)

    Takahashi, Y; Katagiri, S; Inouye, S; Sakaguchi, M

    1990-12-01

    We devised a new counting method of pollen allergen particles which improved the fluorescence immunoblotting technique by Schumacher et al (1988). And by which airborne pollen allergens became visible under 10X magnifier or naked eyes. Airborne pollen allergens collected on the Burkard's sampling tape were transferred onto nitrocellulose membrane and were reacted with anti Cry j I rabbit serum or anti Lol p I rabbit serum, and then treated with alkaline phosphatase conjugated F(ab')2 anti rabbit IgG. Finally, bluish purple spots were obtained by staining with BCIP/NBT phosphatase substrate system. This technique does not require any skillful morphological observation, and is more suitable to measure the amounts of airborne pollen allergen for given pollinosis patients because total pollen allergen particles with common antigenicity are measured. In Japanese red cedar pollen counts, we could not count the spots more than 400 grains per 0.16 cm2 of the sample trapping area due to many overlapping spots. In this case, we tried to calculate the value from the ratio of bluish purple coloured area to one pollen area. However, a more suitable method for estimating the content of pollinosis caused airborne allergens may be colorimetric quantitation using densitometry and displaying the value as allergen content.

  20. Stable carbon isotope fractionation in pollen of Atlas cedar: first steps towards a new palaeoecological proxy for Northwest Africa

    Science.gov (United States)

    Bell, Benjamin; Fletcher, William; Ryan, Peter; Grant, Helen; Ilmen, Rachid

    2016-04-01

    Analysis of stable carbon isotopes can provide information on climate and the environmental conditions at different growth stages of the plant, both past and present. Carbon isotope discrimination in plant tissue is already well understood, and can be used as a drought stress indicator for semi-arid regions. Stable carbon isotope ratios measured directly on pollen provides the potential for the development of long-term environmental proxies (spanning thousands of years), as pollen is well preserved in the environment. Atlas Cedar (Cedrus atlantica Endl. Manetti ex Carrière), is an ideal test case to develop a pollen stable carbon isotope proxy. The tree grows across a wide altitudinal and climatic range and is extremely sensitive to moisture availability. The pollen is abundant, and easily identifiable to the species level in pollen analysis because different cedar species are geographically confined to different regions of the world. In 2015 we sampled 76 individual cedar trees across latitudinal, altitudinal and environmental gradients, highly focused on the Middle Atlas region of Morocco, with 25 additional samples from botanical gardens across Europe and the US to extend these gradients. Here, we report new stable carbon isotope data from pollen, leaf and stem wood from these samples with a view to assessing and quantifying species-specific fractionation effects associated with pollen production. The isotopic response of individual trees at local and wider geographical scales to altitude and climatic conditions is presented. This research forms part of an ongoing PhD project working to develop and calibrate a modern carbon isotope proxy in Atlas cedar pollen, which can ultimately be applied to fossil sequences and complement existing multi-proxy records (e.g. pollen analysis in lake sediments, tree-rings).

  1. Visual Recognition Software for Binary Classification and its Application to Pollen Identification

    Science.gov (United States)

    Punyasena, S. W.; Tcheng, D. K.; Nayak, A.

    2014-12-01

    An underappreciated source of uncertainty in paleoecology is the uncertainty of palynological identifications. The confidence of any given identification is not regularly reported in published results, so cannot be incorporated into subsequent meta-analyses. Automated identifications systems potentially provide a means of objectively measuring the confidence of a given count or single identification, as well as a mechanism for increasing sample sizes and throughput. We developed the software ARLO (Automated Recognition with Layered Optimization) to tackle difficult visual classification problems such as pollen identification. ARLO applies pattern recognition and machine learning to the analysis of pollen images. The features that the system discovers are not the traditional features of pollen morphology. Instead, general purpose image features, such as pixel lines and grids of different dimensions, size, spacing, and resolution, are used. ARLO adapts to a given problem by searching for the most effective combination of feature representation and learning strategy. We present a two phase approach which uses our machine learning process to first segment pollen grains from the background and then classify pollen pixels and report species ratios. We conducted two separate experiments that utilized two distinct sets of algorithms and optimization procedures. The first analysis focused on reconstructing black and white spruce pollen ratios, training and testing our classification model at the slide level. This allowed us to directly compare our automated counts and expert counts to slides of known spruce ratios. Our second analysis focused on maximizing classification accuracy at the individual pollen grain level. Instead of predicting ratios of given slides, we predicted the species represented in a given image window. The resulting analysis was more scalable, as we were able to adapt the most efficient parts of the methodology from our first analysis. ARLO was able to

  2. Monitoring Dopamine ex Vivo during Electrical Stimulation Using Liquid-Microjunction Surface Sampling.

    Science.gov (United States)

    Gill, Emily L; Marks, Megan; Yost, Richard A; Vedam-Mai, Vinata; Garrett, Timothy J

    2017-12-19

    Liquid-microjunction surface sampling (LMJ-SS) is an ambient ionization technique based on the continuous flow of solvent using an in situ microextraction device in which solvent moves through the probe, drawing in the analytes in preparation for ionization using an electrospray ionization source. However, unlike traditional mass spectrometry (MS) techniques, it operates under ambient pressure and requires no sample preparation, thereby making it ideal for rapid sampling of thicker tissue sections for electrophysiological and other neuroscientific research studies. Studies interrogating neural synapses, or a specific neural circuit, typically employ thick, ex vivo tissue sections maintained under near-physiological conditions to preserve tissue viability and maintain the neural networks. Deep brain stimulation (DBS) is a surgical procedure used to treat the neurological symptoms that are associated with certain neurodegenerative and neuropsychiatric diseases. Parkinson's disease (PD) is a neurological disorder which is commonly treated with DBS therapy. PD is characterized by the degeneration of dopaminergic neurons in the substantia nigra pars compacta portion of the brain. Here, we demonstrate that the LMJ-SS methodology can provide a platform for ex vivo analysis of the brain during electrical stimulation, such as DBS. We employ LMJ-SS in the ex vivo analysis of mouse brain tissue for monitoring dopamine during electrical stimulation of the striatum region. The mouse brain tissue was sectioned fresh post sacrifice and maintained in artificial cerebrospinal fluid to create near-physiological conditions before direct sampling using LMJ-SS. A selection of metabolites, including time-sensitive metabolites involved in energy regulation in the brain, were identified using standards, and the mass spectral database mzCloud was used to assess the feasibility of the methodology. Thereafter, the intensity of m/z 154 corresponding to protonated dopamine was monitored before

  3. Next generation immunotherapy for tree pollen allergies.

    Science.gov (United States)

    Su, Yan; Romeu-Bonilla, Eliezer; Heiland, Teri

    2017-10-03

    Tree pollen induced allergies are one of the major medical and public health burdens in the industrialized world. Allergen-Specific Immunotherapy (AIT) through subcutaneous injection or sublingual delivery is the only approved therapy with curative potential to pollen induced allergies. AIT often is associated with severe side effects and requires long-term treatment. Safer, more effective and convenient allergen specific immunotherapies remain an unmet need. In this review article, we discuss the current progress in applying protein and peptide-based approaches and DNA vaccines to the clinical challenges posed by tree pollen allergies through the lens of preclinical animal models and clinical trials, with an emphasis on the birch and Japanese red cedar pollen induced allergies.

  4. Pollen-projektiga Rootsis / Lembit Jakobson

    Index Scriptorium Estoniae

    Jakobson, Lembit

    2009-01-01

    Avastusõppe projektist "Pollen" Eesti (2006-2009) mille eesmärk on kõiki lapsi kaasav uurimisõpe. Kevadisel koolivaheajal tutvus kümmekond Eesti õpetajat uurimisõppega Stockholmi kahes algkoolis

  5. Intraspecific variation in pollen viability, germination and ...

    African Journals Online (AJOL)

    Oleaceae) cultivars 'Koroneiki', 'Mastoidis' and 'Kalamata' was studied with scanning electron microscopy to identify genotype- distinguishing characters that could be employed for morphological cultivar discrimination. Pollen viability and germination ...

  6. Evolutionarily conserved phenylpropanoid pattern on angiosperm pollen.

    Science.gov (United States)

    Fellenberg, Christin; Vogt, Thomas

    2015-04-01

    The male gametophyte of higher plants appears as a solid box containing the essentials to transmit genetic material to the next generation. These consist of haploid generative cells that are required for reproduction, and an invasive vegetative cell producing the pollen tube, both mechanically protected by a rigid polymer, the pollen wall, and surrounded by a hydrophobic pollen coat. This coat mediates the direct contact to the biotic and abiotic environments. It contains a mixture of compounds required not only for fertilization but also for protection against biotic and abiotic stressors. Among its metabolites, the structural characteristics of two types of phenylpropanoids, hydroxycinnamic acid amides and flavonol glycosides, are highly conserved in Angiosperm pollen. Structural and functional aspects of these compounds will be discussed. Copyright © 2015 Elsevier Ltd. All rights reserved.

  7. Revealing Pesticide Residues Under High Pesticide Stress in Taiwan's Agricultural Environment Probed by Fresh Honey Bee (Hymenoptera: Apidae) Pollen.

    Science.gov (United States)

    Nai, Yu-Shin; Chen, Tsui-Yao; Chen, Yi-Cheng; Chen, Chun-Ting; Chen, Bor-Yann; Chen, Yue-Wen

    2017-10-01

    Significant pesticide residues are among the most serious problems for sustainable agriculture. In the beekeeping environment, pesticides not only impact a honey bee's survival, but they also contaminate bee products. Taiwan's agricultural environment has suffered from pesticide stress that was higher than that found in Europe and America. This study deciphered problems of pesticide residues in fresh honey bee pollen samples collected from 14 monitoring apiaries in Taiwan, which reflected significant contaminations within the honey bee population. In total, 155 pollen samples were screened for 232 pesticides, and 56 pesticides were detected. Among the residues, fluvalinate and chlorpyrifos showed the highest concentrations, followed by carbendazim, carbaryl, chlorfenapyr, imidacloprid, ethion, and flufenoxuron. The average frequency of pesticide residues detected in pollen samples was ca. 74.8%. The amounts and types of pesticides were higher in winter and in southwestern Taiwan. Moreover, five of these pollen samples were contaminated with 11-15 pesticides, with average levels between 1,560 and 6,390 μg/kg. Compared with the literature, this study emphasized that pollen gathered by honey bee was highly contaminated with more pesticides in Taiwan than in the America, France, and Spain. The ubiquity of pesticides in the pollen samples was likely due to the field applications of common pesticides. Recently, the Taiwanese government began to improve the pesticide policy. According to the resurvey data in 2016, there were reductions in several pesticide contamination parameters in pollen samples from west to southwest Taiwan. A long-term investigation of pollen pesticide residues should be conducted to inspect pesticides usage in Taiwan's agriculture. © The Author 2017. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  8. Pollen fertility studies in Jatropha L.

    OpenAIRE

    Sasikala. R; M.Paramathma; R. Kalaiyarasi

    2009-01-01

    Pollen fertility percentage is conducted for 10 Jatropha species and an interspecific backcrossing hybrid between Jatrophacurcas x Jatropha integerrima (BC3F1). Totally nine species namely Jatropha villosa var. villosa , Jatropha villosa var.villosa , Jatropha multifida, Jatropha podagrica, Jatropha maheswarii, Jatropha glandulifera, Jatropha gossypifolia,Jatropha integerrima and Jatropha curcas had more than 84 per cent of pollen fertility. BC3F1 hybrid recorded the highestpollen fertility p...

  9. Are there changes in Germany regarding the start of the pollen season, the season length and the pollen concentration of the most important allergenic pollens?

    Energy Technology Data Exchange (ETDEWEB)

    Kaminski, Uwe [Centre for Human Biometeorological Research, Freiburg (Germany). German Meteorological Service; Glod, Tom [Univ. of Trier (Germany). FB Physical Geography

    2011-10-15

    For the regions Northwest, Northeast and Southern Germany we examined the main allergic pollen (Hazel, Alder, Birch, grasses and Mugwort) for trends on the basis of the pollen counts of the Pollen Information Service (PID) reference-stations. From these stations information about changes on the start of the pollen season, the season length and the total amount as well as the peak-concentration of pollen during the last years (1988-2009 for Northwest and Southern Germany and 1994-2009 for Northeast Germany) are examined. Possible trends are analysed by means of the Mann-Kendall test for their significance. The results demonstrate that the changes, regarding the start of the pollen season and the total pollen amount, are strongest in Southern and Northeast Germany. Data show for all regions that tree pollen becomes the significant allergen. (orig.)

  10. Pollen-related allergy in Europe.

    Science.gov (United States)

    D'Amato, G; Spieksma, F T; Liccardi, G; Jäger, S; Russo, M; Kontou-Fili, K; Nikkels, H; Wüthrich, B; Bonini, S

    1998-06-01

    The increasing mobility of Europeans for business and leisure has led to a need for reliable information about exposure to seasonal airborne allergens during travel abroad. Over the last 10 years or so, aeropalynologic and allergologic studies have progressed to meet this need, and extensive international networks now provide regular pollen and hay-fever forecasts. Europe is a geographically complex continent with a widely diverse climate and a wide spectrum of vegetation. Consequently, pollen calendars differ from one area to another; however, on the whole, pollination starts in spring and ends in autumn. Grass pollen is by far the most frequent cause of pollinosis in Europe. In northern Europe, pollen from species of the family Betulaceae is a major cause of the disorder. In contrast, the mild winters and dry summers of Mediterranean areas favor the production of pollen types that are rarely found in central and northern areas of the continent (e.g., the genera Parietaria, Olea, and Cupressus). Clinical and aerobiologic studies show that the pollen map of Europe is changing also as a result of cultural factors (e.g., importation of plants for urban parklands) and greater international travel (e.g., the expansion of the ragweed genus Ambrosia in France, northern Italy, Austria, and Hungary). Studies on allergen-carrying paucimicronic or submicronic airborne particles, which penetrate deep into the lung, are having a relevant impact on our understanding of pollinosis and its distribution throughout Europe.

  11. Plant Sterol Diversity in Pollen from Angiosperms.

    Science.gov (United States)

    Villette, Claire; Berna, Anne; Compagnon, Vincent; Schaller, Hubert

    2015-08-01

    Here we have examined the composition of free sterols and steryl esters of pollen from selected angiosperm species, as a first step towards a comprehensive analysis of sterol biogenesis in the male gametophyte. We detected four major sterol structural groups: cycloartenol derivatives bearing a 9β,19-cyclopropyl group, sterols with a double bond at C-7(8), sterols with a double bond at C-5(6), and stanols. All these groups were unequally distributed among species. However, the distribution of sterols as free sterols or as steryl esters in pollen grains indicated that free sterols were mostly Δ(5)-sterols and that steryl esters were predominantly 9β,19-cyclopropyl sterols. In order to link the sterol composition of a pollen grain at anthesis with the requirement for membrane lipid constituents of the pollen tube, we germinated pollen grains from Nicotiana tabacum, a model plant in reproductive biology. In the presence of radiolabelled mevalonic acid and in a time course series of measurements, we showed that cycloeucalenol was identified as the major neosynthesized sterol. Furthermore, the inhibition of cycloeucalenol neosynthesis by squalestatin was in full agreement with a de novo biogenesis and an apparent truncated pathway in the pollen tube.

  12. Ragweed (Ambrosia) pollen source inventory for Austria.

    Science.gov (United States)

    Karrer, G; Skjøth, C A; Šikoparija, B; Smith, M; Berger, U; Essl, F

    2015-08-01

    This study improves the spatial coverage of top-down Ambrosia pollen source inventories for Europe by expanding the methodology to Austria, a country that is challenging in terms of topography and the distribution of ragweed plants. The inventory combines annual ragweed pollen counts from 19 pollen-monitoring stations in Austria (2004-2013), 657 geographical observations of Ambrosia plants, a Digital Elevation Model (DEM), local knowledge of ragweed ecology and CORINE land cover information from the source area. The highest mean annual ragweed pollen concentrations were generally recorded in the East of Austria where the highest densities of possible growth habitats for Ambrosia were situated. Approximately 99% of all observations of Ambrosia populations were below 745m. The European infection level varies from 0.1% at Freistadt in Northern Austria to 12.8% at Rosalia in Eastern Austria. More top-down Ambrosia pollen source inventories are required for other parts of Europe. A method for constructing top-down pollen source inventories for invasive ragweed plants in Austria, a country that is challenging in terms of topography and ragweed distribution. Crown Copyright © 2015. Published by Elsevier B.V. All rights reserved.

  13. Influence of pollen nutrition on honey bee health: do pollen quality and diversity matter?

    Directory of Open Access Journals (Sweden)

    Garance Di Pasquale

    Full Text Available Honey bee colonies are highly dependent upon the availability of floral resources from which they get the nutrients (notably pollen necessary to their development and survival. However, foraging areas are currently affected by the intensification of agriculture and landscape alteration. Bees are therefore confronted to disparities in time and space of floral resource abundance, type and diversity, which might provide inadequate nutrition and endanger colonies. The beneficial influence of pollen availability on bee health is well-established but whether quality and diversity of pollen diets can modify bee health remains largely unknown. We therefore tested the influence of pollen diet quality (different monofloral pollens and diversity (polyfloral pollen diet on the physiology of young nurse bees, which have a distinct nutritional physiology (e.g. hypopharyngeal gland development and vitellogenin level, and on the tolerance to the microsporidian parasite Nosemaceranae by measuring bee survival and the activity of different enzymes potentially involved in bee health and defense response (glutathione-S-transferase (detoxification, phenoloxidase (immunity and alkaline phosphatase (metabolism. We found that both nurse bee physiology and the tolerance to the parasite were affected by pollen quality. Pollen diet diversity had no effect on the nurse bee physiology and the survival of healthy bees. However, when parasitized, bees fed with the polyfloral blend lived longer than bees fed with monofloral pollens, excepted for the protein-richest monofloral pollen. Furthermore, the survival was positively correlated to alkaline phosphatase activity in healthy bees and to phenoloxydase activities in infected bees. Our results support the idea that both the quality and diversity (in a specific context of pollen can shape bee physiology and might help to better understand the influence of agriculture and land-use intensification on bee nutrition and health.

  14. Area G perimeter surface-soil and single-stage water sampling: Environmental surveillance for fiscal year 95. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    Childs, M.; Conrad, R.

    1997-09-01

    ESH-19 personnel collected soil and single-stage water samples around the perimeter of Area G at Los Alamos National Laboratory (LANL) during FY 95 to characterize possible radionuclide movement out of Area G through surface water and entrained sediment runoff. Soil samples were analyzed for tritium, total uranium, isotopic plutonium, americium-241, and cesium-137. The single-stage water samples were analyzed for tritium and plutonium isotopes. All radiochemical data was compared with analogous samples collected during FY 93 and 94 and reported in LA-12986 and LA-13165-PR. Six surface soils were also submitted for metal analyses. These data were included with similar data generated for soil samples collected during FY 94 and compared with metals in background samples collected at the Area G expansion area.

  15. [A VALIDATION STUDY OF THE IMPROVED PRODUCT FOR MEASURING JAPANESE CYPRESS POLLEN-SPECIFIC IgE (THERMO SCIENTIFIC™ImmunoCAP™ImmunoCAP JAPANESE CYPRESS POLLEN-SPECIFIC IgE)].

    Science.gov (United States)

    Yonekura, Syuji; Okamoto, Yoshitaka; Nakayama, Satoshi

    2018-01-01

    Japanese cypress pollen is a major causative allergen of seasonal allergic rhinitis in Japan. Although ImmunoCAP-specific immunoglobulin E (IgE) reagent Japanese cypress pollen has been widely used as a diagnostic aid, its sensitivity requires enhancement. This study evaluated an improved version of this reagent. Serum samples from 61 subjects who underwent Japanese cypress pollen exposure testing in an environmental challenge chamber in Chiba University were assessed using the conventional ImmunoCAPspecific IgE Japanese cypress pollen product and the improved product. In addition, specific IgE for Cha o 1 and Cha o 2, the primary allergen components of Japanese cypress pollen, was evaluated and their reactivity to specific IgE was compared between the conventional and improved products. The antibody titer of the improved product was approximately 1.8-fold that of the conventional product. In addition, higher correlations with Cha o 1 and Cha o 2 were observed for the improved product than for the conventional product. The clinical sensitivity (≥class 2) in 56 exposure test-positive subjects was better for the improved product (80.4%) than for the conventional product (71.4%). An improvement of the ImmunoCAP-specific IgE reagent Japanese cypress pollen resulted in enhanced Japanese cypress pollen-specific IgE sensitivity. The primary reason for this appeared to be an improved Cha o 1- and Cha o 2-specific IgE detectability.

  16. Flowering and the Pollen Fertility in Iranian Garlic Clones

    Directory of Open Access Journals (Sweden)

    A. R. Abbasifar

    2015-06-01

    Full Text Available Garlic (Allium sativum L. cannot produce seed because it is a sterile plant. For studying bolting and determination of pollen fertility, 68 Iranian garlic clones were gathered from different parts of Iran and evaluated in Research Field of Horticultural Department, Faculty of Agriculture, Bu-Ali Sina University in 2010-2011 and 2011-2012. For determining the pollen fertility, some tests including specific RAPD marker, pollen germination, pollen viability detection using acetocarmine and in vitro culture of ovules and fruits were used. Results showed that 37 of Iranian garlic clones could produce scape and inflorescence. The percentage range of pollen stained with acetocarmine was from 0.5 up to 20 percent showing infertility of pollens. Lack of two markers (OPJ121300 and OPJ121700 and pollen tube growth proved the infertility of garlic clones pollen. Fruits and embryo sac were alive for more than two months, showing their potential for producing seeds following pollination with fertile pollens.

  17. Seasonal variation in diurnal atmospheric grass pollen concentration profiles

    DEFF Research Database (Denmark)

    Peel, Robert George; Orby, P.V.; Skjoth, C. A.

    2014-01-01

    In this study, the diurnal atmospheric grass pollen concentration profile within the Danish city of Aarhus was shown to change in a systematic manner as the pollen season progressed. Although diurnal grass pollen profiles can differ greatly from day-to-day, it is common practice to establish...... the time of day when peak concentrations are most likely to occur using seasonally averaged diurnal profiles. Atmospheric pollen loads are highly dependent upon emissions, and different species of grass are known to flower and emit pollen at different times of the day and during different periods...... of the pollen season. Pollen concentrations are also influenced by meteorological factors - directly through those parameters that govern pollen dispersion and transport, and indirectly through the weather-driven flowering process. We found that three different profiles dominated the grass pollen season...

  18. Gametophytic Pollen Tube Guidance: Attractant Peptides, Gametic Controls, and Receptors.

    Science.gov (United States)

    Higashiyama, Tetsuya; Yang, Wei-Cai

    2017-01-01

    Pollen tube guidance in flowering plants is a unique and critical process for successful sexual reproduction. The pollen tube that grows from pollen, which is the male gametophyte, precisely navigates to the embryo sac, which is the female gametophyte, within the pistil. Recent advances have clarified the molecular framework of gametophytic pollen tube guidance. Multiple species-specific attractant peptides are secreted from synergid cells, the proper development and function of which are regulated by female gametes. Multiple receptor-like kinases on the pollen tube tip are involved in sensing species-specific attractant peptides. In this Update article, recent progress in our understanding of the mechanism of gametophytic pollen tube guidance is reviewed, including attraction by synergid cells, control of pollen tube guidance by female gametes, and directional growth of the pollen tube by directional cue sensing. Future directions in the study of pollen tube guidance also are discussed. © 2017 American Society of Plant Biologists. All Rights Reserved.

  19. Arabidopsis adaptor protein 1G is critical for pollen development.

    Science.gov (United States)

    Feng, Chong; Wang, Jia-Gang; Liu, Hai-Hong; Li, Sha; Zhang, Yan

    2017-09-01

    Pollen development is a pre-requisite for sexual reproduction of angiosperms, during which various cellular activities are involved. Pollen development accompanies dynamic remodeling of vacuoles through fission and fusion, disruption of which often compromises pollen viability. We previously reported that the Y subunit of adaptor protein 1 (AP1G) mediates synergid degeneration during pollen tube reception. Here, we demonstrate that AP1G is essential for pollen development. AP1G loss-of-function resulted in male gametophytic lethality due to defective pollen development. By ultrastructural analysis and fluorescence labeling, we demonstrate that AP1G loss-of-function compromised dynamic vacuolar remodeling during pollen development and impaired vacuolar acidification of pollen. Results presented here support a key role of vacuoles in gametophytic pollen development. © 2017 Institute of Botany, Chinese Academy of Sciences.

  20. Hydrogel control of water uptake by pectins during in vitro pollen hydration of Eucalyptus globulus.

    Science.gov (United States)

    Vieira, Ana Maria; Feijó, José A

    2016-03-01

    Upon pollination, dehydrated pollen grains take water out of the stigma surface, an event that constitutes the first functional checkpoint of sexual reproduction in higher plants. Little is known about possible functional connections between rehydration speed and further steps of fertilization. Here we addressed the mechanisms of water uptake control by dehydrated pollen grains. Because dehydrated cells have no energy-driven active mechanism such as membrane-based osmoregulation for controlling water movement, we tested the hypothesis that another mechanism might exist, namely, the use of hydrogel-behaving molecules. We developed an imaging protocol to visualize and quantify the rate of water entry into pollen grains of Eucalyptus globulus and tested the influence of different treatments linked to hydrogel-behaving molecules. We complemented these analyses by immunostaining pectins in the pollen grain with monoclonal antibodies JIM5 and JIM7. Water entry seemed to proceed exclusively through the germination apertures of the pollen grain, and the changes observed in different hydration media are compatible with hydrogel behavior. When JIM5 and JIM7 were used to characterize pectins on the germination apertures during hydration, pectin localization and esterification changed during hydration and were affected by the hydration solutions. These results suggest that chemical modification of the pectins may change their hydrogel behavior, thus modifying the hydration speed. The hydrogel behavior of pectins and pectin localization on apertures strongly suggest that pectins act like "valves" for water entry, enabling a regulated process of water uptake into the dehydrated pollen grain. We propose that this regulation evolved in terms of achieving the correct self-organization of molecules and cellular components to resume metabolism and pollen tube growth, especially in species that are subject to demanding environmental water stress. © 2016 Botanical Society of America.

  1. A 12,000-Yr Pollen Record off Cape Hatteras: Pollen Sources and Mechanisms of Pollen Dispersion

    Science.gov (United States)

    Naughton, F.; Keigwin, L.; Peteet, D.; Costas, S.; Desprat, S.; Oliveira, D.; de Vernal, A.; Voelker, A.; Abrantes, F.

    2015-01-01

    Integrating both marine and terrestrial signals from the same sediment core is one of the primary challenges for understanding the role of ocean-atmosphere coupling throughout past climate changes. It is therefore vital to understand how the pollen signal of a given marine record reflects the vegetation changes of the neighboring continent. The comparison between the pollen record of marine core JPC32 (KNR178JPC32) and available terrestrial pollen sequences from eastern North America over the last 12,170 years indicates that the pollen signature off Cape Hatteras gives an integrated image of the regional vegetation encompassing the Pee Dee river, Chesapeake and Delaware hydrographic basins and is reliable in reconstructing the past climate of the adjacent continent. Extremely high quantities of pollen grains included in the marine sediments off Cape Hatteras were transferred from the continent to the sea, at intervals 10,100-8800 cal yr BP, 8300-7500 cal yr BP, 5800- 4300 cal yr BP and 2100-730 cal yr BP, during storm events favored by episodes of rapid sea-level rise in the eastern coast of US. In contrast, pollen grains export was reduced during 12,170-10,150 cal yr BP and 4200- 2200 cal yr BP, during episodes of intense continental dryness and slow sea level rise episodes or lowstands in the eastern coast of US. The near absence of reworked pollen grains in core JPC32 contrasts with the high quantity of reworked material in nearby but deeper located marine sites, suggesting that the JPC32 recordwas not affected by the DeepWestern Boundary Current (DWBC) since the end of the Younger Dryas and should be considered a key site for studying past climate changes in the western North Atlantic.

  2. The apparent effect of sample surface damage on the dielectric parameters of GaAs

    Energy Technology Data Exchange (ETDEWEB)

    Engelbrecht, J.A.A. [Physics Department, Nelson Mandela Metropolitan University, P.O. Box 77000, Port Elizabeth 6031 (South Africa)], E-mail: Japie.Engelbrecht@nmmu.ac.za; Hashe, N.G. [Physics Department, Nelson Mandela Metropolitan University, P.O. Box 77000, Port Elizabeth 6031 (South Africa); Hillie, K.T. [CSIR-NML Laboratory, P.O. Box 395, Pretoria 0001 (South Africa); Claassens, C.H. [Physics Department, University of the Free State, Bloemfontein 9300 (South Africa)

    2007-12-15

    The dielectric and optical parameters determined by infrared reflectance spectroscopy and computer simulation of a set of GaAs substrates of various surface topologies are reported. The influence of surface damage on the parameters is noted.

  3. The apparent effect of sample surface damage on the dielectric parameters of GaAs

    International Nuclear Information System (INIS)

    Engelbrecht, J.A.A.; Hashe, N.G.; Hillie, K.T.; Claassens, C.H.

    2007-01-01

    The dielectric and optical parameters determined by infrared reflectance spectroscopy and computer simulation of a set of GaAs substrates of various surface topologies are reported. The influence of surface damage on the parameters is noted

  4. Atmospheric transportation of marihuana pollen from North Africa to the Southwest of Europe

    Science.gov (United States)

    Cabezudo, Baltasar; Recio, Marta; Sánchez-Laulhé, JoséMaŕia; Trigo, María Del Mar; Toro, Francisco Javier; Polvorinos, Fausto

    As a result of aerobiological samples taken on the Costa del Sol (S. Spain), Cannabis sativa L. (marihuana) pollen was detected from May to September 1991-1996, always sporadically and usually during the afternoons. Sampling was by two volumetric spore traps set up in Malaga and Estepona, two coastal towns approximately 90 km apart. A study of the days when this pollen was recorded points to the movement of air masses from North Africa to southern Spain. Furthermore, the isentropic air trajectories calculated for these days reinforce the possibility of the pollen originating in marihuana plantations in northern Morocco (Rif). This study demonstrates the application of aerobiology to the control of the source, quantity and phenology of the crop.

  5. Honey bee-collected pollen in agro-ecosystems reveals diet diversity, diet quality, and pesticide exposure.

    Science.gov (United States)

    Colwell, Megan J; Williams, Geoffrey R; Evans, Rodger C; Shutler, Dave

    2017-09-01

    European honey bees Apis mellifera are important commercial pollinators that have suffered greater than normal overwintering losses since 2007 in North America and Europe. Contributing factors likely include a combination of parasites, pesticides, and poor nutrition. We examined diet diversity, diet nutritional quality, and pesticides in honey bee-collected pollen from commercial colonies in the Canadian Maritime Provinces in spring and summer 2011. We sampled pollen collected by honey bees at colonies in four site types: apple orchards, blueberry fields, cranberry bogs, and fallow fields. Proportion of honey bee-collected pollen from crop versus noncrop flowers was high in apple, very low in blueberry, and low in cranberry sites. Pollen nutritional value tended to be relatively good from apple and cranberry sites and poor from blueberry and fallow sites. Floral surveys ranked, from highest to lowest in diversity, fallow, cranberry, apple, and blueberry sites. Pesticide diversity in honey bee-collected pollen was high from apple and blueberry sites and low from cranberry and fallow sites. Four different neonicotinoid pesticides were detected, but neither these nor any other pesticides were at or above LD 50 levels. Pollen hazard quotients were highest in apple and blueberry sites and lowest in fallow sites. Pollen hazard quotients were also negatively correlated with the number of flower taxa detected in surveys. Results reveal differences among site types in diet diversity, diet quality, and pesticide exposure that are informative for improving honey bee and land agro-ecosystem management.

  6. Pollen as a possible pathway for the dissemination of Pseudomonas syringae pv. actinide and bacterial canker of kiwifruit

    Directory of Open Access Journals (Sweden)

    Rodanthi TONTOU

    2014-09-01

    Full Text Available Pollen collected in a kiwifruit orchard with symptoms of bacterial canker and naturally contaminated by Pseudomonas syringae pv. actinidiae (Psa, was used to pollinate an experimental orchard, in order to confirm its role, under commercial orchard conditions, in disseminating the pathogen and, possibly, contributing to disease spread. A pollen lot, certified free from Psa, was used with the same methods as a control. Two pollination techniques were used: dusting (dry pollen and spraying (pollen suspension in water. The orchard was monitored during 2 years from experimental pollination, with regular sampling of flowers, fruits, leaves, and vines, to check for Psa as an epiphyte or endophyte, and for bacterial canker symptoms. Psa was recovered from flowers, fruitlets and leaves during the first season, mainly in plots where contaminated pollen had been sprayed in water suspension. From early August until harvesting time (mid-October, Psa detection was possible only on leaves. No symptoms developed during the first season after pollination. No endophytic Psa was detected in pruned vines in the following winter. During the second season, detection and isolation of Psa was erratic, but direct isolation was achieved from four plots. During the second season after pollination, typical leaf symptoms were observed on a few vines, and Psa was isolated and identified. Our results suggest that Psa could be disseminated via contaminated kiwifruit pollen as a pathway for spread of bacterial canker. However, further pollination experiments are needed to establish, beyond any doubt, whether contaminated pollen may contribute to possible disease outbreaks.

  7. Pollen of Southeast Asian Alchornea (Euphorbiaceae), with an overview of the pollen fossil record

    NARCIS (Netherlands)

    Bulalacao, L.J.; Ham, van der R.W.J.M.

    2003-01-01

    In order to evaluate pollen morphological descriptions of Alchornea in the literature, which are almost completely based on African and American species, the pollen of eight Southeast Asian species of Alchornea was investigated, using light and scanning electron microscopy. Very little variation

  8. Storage and irradiation of Cucumis pollen and their influence on pollen vitality

    International Nuclear Information System (INIS)

    Oost, E.H.; Nijs, A.P.M. den

    1979-01-01

    In connection with an interspecific hybridization programme and a mentor pollen experiment in Cucumis, the optimal storage conditions and in vitro germination medium for both fresh and irradiated pollen of the cultivated cucumber and two wild African Cucumis species have been searched for. (Auth.)

  9. De novo post-pollen mitosis II tobacco pollen tube transcriptome

    Czech Academy of Sciences Publication Activity Database

    Hafidh, Said; Breznenová, Katarína; Honys, David

    2012-01-01

    Roč. 7, č. 8 (2012), s. 918-921 ISSN 1559-2316 R&D Projects: GA ČR GPP501/11/P321; GA ČR GA522/09/0858 Institutional research plan: CEZ:AV0Z50380511 Keywords : de novo pollen tube transcriptome * male gametophyte development * pollen tube growth Subject RIV: ED - Physiology

  10. Time-Efficiency of Sorting Chironomidae Surface-Floating Pupal Exuviae Samples from Urban Trout Streams in Northeast Minnesota, USA

    Directory of Open Access Journals (Sweden)

    Alyssa M Anderson

    2012-10-01

    Full Text Available Collections of Chironomidae surface-floating pupal exuviae (SFPE provide an effective means of assessing water quality in streams. Although not widely used in the United States, the technique is not new and has been shown to be more cost-efficient than traditional dip-net sampling techniques in organically enriched stream in an urban landscape. The intent of this research was to document the efficiency of sorting SFPE samples relative to dip-net samples in trout streams with catchments varying in amount of urbanization and differences in impervious surface. Samples of both SFPE and dip-nets were collected from 17 sample sites located on 12 trout streams in Duluth, MN, USA. We quantified time needed to sort subsamples of 100 macroinvertebrates from dip-net samples, and less than or greater than 100 chironomid exuviae from SFPE samples. For larger samples of SFPE, the time required to subsample up to 300 exuviae was also recorded. The average time to sort subsamples of 100 specimens was 22.5 minutes for SFPE samples, compared to 32.7 minutes for 100 macroinvertebrates in dip-net samples. Average time to sort up to 300 exuviae was 37.7 minutes. These results indicate that sorting SFPE samples is more time-efficient than traditional dip-net techniques in trout streams with varying catchment characteristics.doi: 10.5324/fn.v31i0.1380.Published online: 17 October 2012.

  11. The clinical relevance of sensitization to pollen-related fruits and vegetables in unselected pollen-sensitized adults

    DEFF Research Database (Denmark)

    Osterballe, M.; Hansen, T.K.; Mørtz, Charlotte G

    2005-01-01

    season. OBJECTIVE: The aim of this study was to estimate the clinical relevance of sensitization to pollen-related fruits and vegetables in unselected pollen-sensitized adults and to examine the diagnostic value of skin-prick test (SPT), histamine release and specific IgE compared with the outcome......BACKGROUND: Previous studies have described cross-reactivity between fresh fruits, vegetables and pollen. However, no data demonstrates the clinical relevance of sensitization to pollen-related fruits and vegetables in unselected pollen-sensitized adults with and without symptoms in the pollen...... to fruits and vegetables in pollen-sensitized adults, but also a discrepancy between the prevalence of sensitization to fruits and vegetables and the clinical relevance in different pollen-sensitized groups with symptoms in the pollen season as a significant factor....

  12. Pollen grain sporoderm and types of dispersal units

    Directory of Open Access Journals (Sweden)

    Ettore Pacini

    2014-01-01

    Full Text Available The pollen of gymnosperms and angiosperms may be dispersed in monads, tetrads, polyads, massulae or compact pollinia. The monads and tetrads may form larger clumps of pollen because filiform pollen is tangled while other kinds of pollen can be glued by means of different devices. Exine and intine modify their structure to adapt to pollen dispersing units, exine in some cases can be absent. An additional layer, a thin callosic wall, can be present in some species beneath the intine; this occurs when pollen grains are slightly dehydrated before dispersal.

  13. Biomization and quantitative climate reconstruction techniques in northwestern Mexico—With an application to four Holocene pollen sequences

    Science.gov (United States)

    Ortega-Rosas, C. I.; Guiot, J.; Peñalba, M. C.; Ortiz-Acosta, M. E.

    2008-04-01

    New paleovegetation and paleoclimatic reconstructions from the Sierra Madre Occidental (SMO) in northwestern Mexico are presented. This work involves climate and biome reconstruction using Plant Functional Types (PFT) assigned to pollen taxa. We used fossil pollen data from four Holocene peat bogs located at different altitudes (1500-2000 m) at the border region of Sonora and Chihuahua at around 28° N latitude (Ortega-Rosas, C.I. 2003. Palinología de la Ciénega de Camilo: datos para la historia de la vegetación y el clima del Holoceno medio y superior en el NW de la Sierra Madre Occidental, Sonora, Mexico. Master Thesis, Universidad Nacional Autónoma de México, México D.F.; Ortega-Rosas, C.I., Peñalba, M.C., Guiot, J. Holocene altitudinal shifts in vegetation belts and environmental changes in the Sierra Madre Occidental, Northwestern Mexico. Submitted for publication of Palaeobotany and Palynology). The closest modern pollen data come from pollen analysis across an altitudinal transect from the Sonoran Desert towards the highlands of the temperate SMO at the same latitude (Ortega-Rosas, C.I. 2003. Palinología de la Ciénega de Camilo: datos para la historia de la vegetación y el clima del Holoceno medio y superior en el NW de la Sierra Madre Occidental, Sonora, Mexico. Master Thesis, Universidad Nacional Autónoma de México, México D.F.). An additional modern pollen dataset of 400 sites across NW Mexico and the SW United States was compiled from different sources (Davis, O.K., 1995. Climate and vegetation pattern in surface samples from arid western U.S.A.: application to Holocene climatic reconstruction. Palynology 19, 95-119, North American Pollen Database, Latin-American Pollen Database, personal data, and different scientific papers). For the biomization method (Prentice, I.C., Guiot, J., Huntley, B., Jolly, D., Cheddadi, R., 1996. Reconstructing biomes from paleoecological data: a general method and its application to European pollen data at 0 and

  14. Plant cells which aid in pollen digestion within a beetle's gut.

    Science.gov (United States)

    Rickson, Fred R; Cresti, M; Beach, James H

    1990-03-01

    The peach palm, Bactris gasipaes H.B.K., in Costa Rica, possesses unusual trichomes on the inflorescence epidermal surface. Certain cells of the trichome possess a thick, highly lignified cell wall and are consumed by the beetle Cyclocephala amazona L. before it ingests pollen from the same inflorescence. Chemical analyses show the trichome to possess no nutritive value. The thick-walled trichome cells pass intact through the beetle's digestive system, while ingested pollen is crushed. We suggest that the specialized plant cells function as gastroliths in the beetle's digestive tract.

  15. Ozone affects pollen viability and NAD(P)H oxidase release from Ambrosia artemisiifolia pollen

    Energy Technology Data Exchange (ETDEWEB)

    Pasqualini, Stefania, E-mail: spas@unipg.it [Department of Applied Biology, University of Perugia, Perugia (Italy); Tedeschini, Emma; Frenguelli, Giuseppe [Department of Applied Biology, University of Perugia, Perugia (Italy); Wopfner, Nicole; Ferreira, Fatima [Department of Molecular Biology, CD Laboratory for Allergy Diagnosis and Therapy, University of Salzburg, Salzburg (Austria); D' Amato, Gennaro [Division of Respiratory and Allergic Diseases, ' A. Cardarelli' High Speciality Hospital, Naples (Italy); Ederli, Luisa [Department of Applied Biology, University of Perugia, Perugia (Italy)

    2011-10-15

    Air pollution is frequently proposed as a cause of the increased incidence of allergy in industrialised countries. We investigated the impact of ozone (O{sub 3}) on reactive oxygen species (ROS) and allergen content of ragweed pollen (Ambrosia artemisiifolia). Pollen was exposed to acute O{sub 3} fumigation, with analysis of pollen viability, ROS and nitric oxide (NO) content, activity of nicotinamide adenine dinucleotide phosphate (NAD[P]H) oxidase, and expression of major allergens. There was decreased pollen viability after O{sub 3} fumigation, which indicates damage to the pollen membrane system, although the ROS and NO contents were not changed or were only slightly induced, respectively. Ozone exposure induced a significant enhancement of the ROS-generating enzyme NAD(P)H oxidase. The expression of the allergen Amb a 1 was not affected by O{sub 3}, determined from the mRNA levels of the major allergens. We conclude that O{sub 3} can increase ragweed pollen allergenicity through stimulation of ROS-generating NAD(P)H oxidase. - Highlights: > O{sub 3} reduces the viability of ragweed pollen. > ROS and allergens of ragweed pollen were not affected by O{sub 3} exposure. > O{sub 3} enhances the activity of the ROS-generating enzyme NAD(P)H oxidase. > O{sub 3} increases ragweed pollen allergenicity through NAD(P)H-oxidase stimulation. - This study focuses on the effects of the atmospheric pollutant ozone on ROS content and NAD(P)H oxidase activity of ragweed pollen grains.

  16. Data Validation Package April 2016 Groundwater and Surface Water Sampling at the Monticello, Utah, Disposal and Processing Sites August 2016

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, Jason [USDOE Office of Legacy Management, Washington, DC (United States); Smith, Fred [Navarro Research and Engineering, Oak Ridge, TN (United States)

    2016-08-01

    This semiannual event includes sampling groundwater and surface water at the Monticello Disposal and Processing Sites. Sampling and analyses were conducted as specified in the Sampling and Analysis Plan for U.S. Department of Energy Office of Legacy Management Sites (LMS/PRO/S04351, continually updated) and Program Directive MNT-2016-01. Complete sample sets were collected from 42 of 48 planned locations (9 of 9 former mill site wells, 13 of 13 downgradient wells, 7 of 9 downgradient permeable reactive barrier wells, 4 of 7 seeps and wetlands, and 9 of 10 surface water locations). Planned monitoring locations are shown in Attachment 1, Sampling and Analysis Work Order. Locations R6-M3, SW00-01, Seep 1, Seep 2, and Seep 5 were not sampled due to insufficient water availability. A partial sample was collected at location R4-M3 due to insufficient water. All samples from the permeable reactive barrier wells were filtered as specified in the program directive. Duplicate samples were collected from surface water location Sorenson and from monitoring wells 92-07 and RlO-Ml. Water levels were measured at all sampled wells and an additional set of wells. See Attachment2, Trip Report for additional details. The contaminants of concern (COCs) for the Monticello sites are arsenic, manganese, molybdenum, nitrate+ nitrite as nitrogen (nitrate+ nitrite as N), selenium, uranium, and vanadium. Locations with COCs that exceeded remediation goals are listed in Table 1 and Table 2. Time-concentration graphs of the COCs for all groundwater and surface water locations are included in Attachment 3, Data Presentation. An assessment of anomalous data is included in Attachment 4.

  17. Are pollen fossils useful for calibrating relaxed molecular clock dating of phylogenies? A comparative study using Myrtaceae.

    Science.gov (United States)

    Thornhill, Andrew H; Popple, Lindsay W; Carter, Richard J; Ho, Simon Y W; Crisp, Michael D

    2012-04-01

    The identification and application of reliable fossil calibrations represents a key component of many molecular studies of evolutionary timescales. In studies of plants, most paleontological calibrations are associated with macrofossils. However, the pollen record can also inform age calibrations if fossils matching extant pollen groups are found. Recent work has shown that pollen of the myrtle family, Myrtaceae, can be classified into a number of morphological groups that are synapomorphic with molecular groups. By assembling a data matrix of pollen morphological characters from extant and fossil Myrtaceae, we were able to measure the fit of 26 pollen fossils to a molecular phylogenetic tree using parsimony optimisation of characters. We identified eight Myrtaceidites fossils as appropriate for calibration based on the most parsimonious placements of these fossils on the tree. These fossils were used to inform age constraints in a Bayesian phylogenetic analysis of a sequence alignment comprising two sequences from the chloroplast genome (matK and ndhF) and one nuclear locus (ITS), sampled from 106 taxa representing 80 genera. Three additional analyses were calibrated by placing pollen fossils using geographic and morphological information (eight calibrations), macrofossils (five calibrations), and macrofossils and pollen fossils in combination (12 calibrations). The addition of new fossil pollen calibrations led to older crown ages than have previously been found for tribes such as Eucalypteae and Myrteae. Estimates of rate variation among lineages were affected by the choice of calibrations, suggesting that the use of multiple calibrations can improve estimates of rate heterogeneity among lineages. This study illustrates the potential of including pollen-based calibrations in molecular studies of divergence times. Copyright © 2011 Elsevier Inc. All rights reserved.

  18. Plant macrofossils analysis from Steregoiu NW Romania: taphonomy, representation, and comparison with pollen analysis

    Directory of Open Access Journals (Sweden)

    Angelica Feurdean

    2008-08-01

    Full Text Available This paper presents the results of macrofossil analysis from the Steregoiu sequence in the Gutaiului Mountains covering the last 8,000 cal BP. The studied peat deposit is characterized by abundant macrofossils. Their diversity is, however, low with most macrofossils coming from plants that grew on the mire and in the forest surrounding the basin (Carex spp., Cyperus sp., Urtica dioica, Potentilla erecta, Filipendula ulmaria, Rubus idaeus, Lycopus europaeus. The concentration of Picea abies macrofossils correlates partially well with its pollen percentages, and only when it has been present on the bog surface. The absence of macrofossils from deciduous trees, which were abundant in the surrounding vegetation according to the pollen data, suggests that these deciduous trees were not growing on the bog or around its margins. The combined macrofossil and the pollen results assists in the understanding of the differences between the local and regional flora.

  19. Rank-based characterization of pollen assemblages collected by honey bees using a multi-locus metabarcoding approach1

    Science.gov (United States)

    Richardson, Rodney T.; Lin, Chia-Hua; Quijia, Juan O.; Riusech, Natalia S.; Goodell, Karen; Johnson, Reed M.

    2015-01-01

    Premise of the study: Difficulties inherent in microscopic pollen identification have resulted in limited implementation for large-scale studies. Metabarcoding, a relatively novel approach, could make pollen analysis less onerous; however, improved understanding of the quantitative capacity of various plant metabarcode regions and primer sets is needed to ensure that such applications are accurate and precise. Methods and Results: We applied metabarcoding, targeting the ITS2, matK, and rbcL loci, to characterize six samples of pollen collected by honey bees, Apis mellifera. Additionally, samples were analyzed by light microscopy. We found significant rank-based associations between the relative abundance of pollen types within our samples as inferred by the two methods. Conclusions: Our findings suggest metabarcoding data from plastid loci, as opposed to the ribosomal locus, are more reliable for quantitative characterization of pollen assemblages. Furthermore, multilocus metabarcoding of pollen may be more reliable than single-locus analyses, underscoring the need for discovering novel barcodes and barcode combinations optimized for molecular palynology. PMID:26649264

  20. Bio-polymer coatings on neural probe surfaces: Influence of the initial sample composition

    Energy Technology Data Exchange (ETDEWEB)

    Chow, Winnie W.Y. [Department of Physics and Astronomy, Uppsala University, Box 516, 751 20 Uppsala (Sweden); Herwik, Stanislav; Ruther, Patrick [Department of Microsystems Engineering (IMTEK), University of Freiburg (Germany); Goethelid, Emmanuelle [Department of Physics and Astronomy, Uppsala University, Box 516, 751 20 Uppsala (Sweden); Oscarsson, Sven, E-mail: sven@svenoscarsson.com [Department of Organic Chemistry, Stockholm University, Arrhenius Laboratory, SE-106 91 Stockholm (Sweden)

    2012-08-01

    This paper presents the results of the study of hyaluronic acid (HyA) coating on two structural materials, silicon oxide (dielectric) surface and platinum (Pt) surface used for fabrication of probes developed for neurological investigations in the framework of the EU-project NeuroProbes. The silicon-based neural probes consist of multiple Pt electrodes on the probe shafts for neural recording applications. HyA coatings were proposed to apply on the probe surfaces to enhance the biocompatibility. This study aims at understanding the influence of the initial composition of the probe surface on the structure and morphology of HyA coating. HyA was chemically functionalized by SS-pyridin using (N-Succinimidyl 3-[2-pyridyldithio]-propionate) (SPDP) and was immobilized on the surfaces via a covalent bond. The dielectric and Pt surfaces were derivatized by use of (3-mercaptopropyl) methyldimethoxysilane (MPMDMS). The silanol groups in MPMDMS bind to the dielectric surface, leaving the thiol groups at the uppermost surface and the thiol groups then bind covalently to the functionalized HyA. On the Pt surface, it is the thiol group which binds on the Pt surface. The coated surfaces were characterized by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). A well-defined HyA layer was observed on both dielectric and Pt surfaces. The coating of two molecular weights (340 kDa and 1.3 MDa) of HyA was examined. The influence of the silanized layer on the HyA coating was also investigated.

  1. Data Validation Package October 2015 Groundwater and Surface Water Sampling at the Monticello, Utah, Processing Site January 2016

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, Jason [U.S. Dept. of Energy, Washington, DC (United States). Office of Legacy Management; Smith, Fred [Navarro Research and Engineering, Inc., Oak Ridge, TN (United States)

    2016-01-21

    Sampling Period: October 12–14, 2015. This semiannual event includes sampling groundwater and surface water at the Monticello Mill Tailings Site. Sampling and analyses were conducted as specified in the 2004 Monticello Mill Tailings Site Operable Unit III Post-Record of Decision Monitoring Plan, Draft Final and Sampling and Analysis Plan for U.S. Department of Energy Office of Legacy Management Sites (LMS/PRO/S04351, continually updated). Samples were collected from 52 of 61 planned locations (15 of 17 former mill site wells, 17 of 18 downgradient wells, 9 of 9 downgradient permeable reactive barrier wells, 2 of 7 seeps and wetlands, and 9 of 10 surface water locations). Locations MW00-07, Seep 1, Seep 2, Seep 3, Seep 5, Seep 6, SW00-01, T01-13, and T01-19 were not sampled because of insufficient water availability. All samples were filtered as specified in the monitoring plan. Duplicate samples were collected from surface water location W3-04 and from monitoring wells 82-08, 92-09, and 92-10. Water levels were measured at all but one sampled well and an additional set of wells. The contaminants of concern (COCs) for the Monticello Mill Tailings Site are arsenic, manganese, molybdenum, nitrate + nitrite as nitrogen (nitrate + nitrite as N), selenium, uranium, and vanadium. Time-concentration graphs of the COCs for all groundwater and surface water locations are included in this report. Locations with COCs that exceeded remediation goals are listed.

  2. Adaptation of G-TAG Software for Validating Touch-and-Go Comet Surface Sampling Design Methodology

    Science.gov (United States)

    Mandic, Milan; Acikmese, Behcet; Blackmore, Lars

    2011-01-01

    The G-TAG software tool was developed under the R&TD on Integrated Autonomous Guidance, Navigation, and Control for Comet Sample Return, and represents a novel, multi-body dynamics simulation software tool for studying TAG sampling. The G-TAG multi-body simulation tool provides a simulation environment in which a Touch-and-Go (TAG) sampling event can be extensively tested. TAG sampling requires the spacecraft to descend to the surface, contact the surface with a sampling collection device, and then to ascend to a safe altitude. The TAG event lasts only a few seconds but is mission-critical with potentially high risk. Consequently, there is a need for the TAG event to be well characterized and studied by simulation and analysis in order for the proposal teams to converge on a reliable spacecraft design. This adaptation of the G-TAG tool was developed to support the Comet Odyssey proposal effort, and is specifically focused to address comet sample return missions. In this application, the spacecraft descends to and samples from the surface of a comet. Performance of the spacecraft during TAG is assessed based on survivability and sample collection performance. For the adaptation of the G-TAG simulation tool to comet scenarios, models are developed that accurately describe the properties of the spacecraft, approach trajectories, and descent velocities, as well as the models of the external forces and torques acting on the spacecraft. The adapted models of the spacecraft, descent profiles, and external sampling forces/torques were more sophisticated and customized for comets than those available in the basic G-TAG simulation tool. Scenarios implemented include the study of variations in requirements, spacecraft design (size, locations, etc. of the spacecraft components), and the environment (surface properties, slope, disturbances, etc.). The simulations, along with their visual representations using G-View, contributed to the Comet Odyssey New Frontiers proposal

  3. Area G Perimeter Surface-Soil Sampling Environmental Surveillance for Fiscal Year 1998 Hazardous and Solid Waste Group (ESH-19)

    Energy Technology Data Exchange (ETDEWEB)

    Marquis Childs

    1999-09-01

    Material Disposal Area G (Area G) is at Technical Area 54 at Los Alamos National Laboratory (LANL). Area G has been the principal facility for the disposal of low-level, solid-mixed, and transuranic waste since 1957. It is currently LANL's primary facility for radioactive solid waste burial and storage. As part of the annual environmental surveillance effort at Area G, surface soil samples are collected around the facility's perimeter to characterize possible radionuclide movement off the site through surface water runoff During 1998, 39 soil samples were collected and analyzed for percent moisture, tritium, plutonium-238 and 239, cesium-137 and americium-241. To assess radionuclide concentrations, the results from these samples are compared with baseline or background soil samples collected in an undisturbed area west of the active portion Area G. The 1998 results are also compared to the results from analogous samples collected during 1996 and 1997 to assess changes over this time in radionuclide activity concentrations in surface soils around the perimeter of Area G. The results indicate elevated levels of all the radionuclides assessed (except cesium-137) exist in Area G perimeter surface soils vs the baseline soils. The comparison of 1998 soil data to previous years (1996 and 1997) indicates no significant increase or decrease in radionuclide concentrations; an upward or downward trend in concentrations is not detectable at this time. These results are consistent with data comparisons done in previous years. Continued annual soil sampling will be necessary to realize a trend if one exists. The radionuclide levels found in the perimeter surface soils are above background but still considered relatively low. This perimeter surface soil data will be used for planning purposes at Area G, techniques to prevent sediment tm.nsport off-site are implemented in the areas where the highest radionuclide concentrations are indicated.

  4. Spatiotemporal Variation in the Environmental Controls of C4-Grass Origin and Ecology: Insights from Grass-Pollen δ13C Data

    Science.gov (United States)

    Nelson, D. M.; Urban, M.; Hu, F.

    2014-12-01

    Understanding the environmental factors controlling the origin and shifting abundance of C4 grasses in Earth's history is useful for projecting the response of C4-grass dominated grasslands to future environmental change. Unfortunately, grass pollen is typically morphologically indistinct, making palynological analysis a blunt tool for studying C4-grasses in the paleorecord. δ13C of individual grass-pollen grains using a spooling wire microcombustion device interfaced with an isotope ratio mass spectrometer (Single Pollen Isotope Ratio AnaLysis, SPIRAL) overcomes this challenge and the potential biases of δ13C data from other substrates (e.g. leaf waxes). To assess the presence and relative abundance of C3- and C4-grass pollen in samples of unknown composition, we developed a hierarchical Bayesian model, trained with ~1,900 δ13C values from pollen grains of 31 grass species. Surface-sediment data from Africa, Australia, and North America demonstrate the reliability of this technique for quantifying C4-grass abundance on the landscape. To investigate the timing and control of the origin of C4-grasses we analyzed samples from the Oligocene-Miocene from Europe and from the Eocene from North America. Results indicate that C4 grasses appeared on the landscape of southwest Europe no later than the early Oligocene, implying that low atmospheric pCO2 may not have been the main driver and/or precondition for the development of C4 photosynthesis in the grass family. In contrast, we found no evidence for C4 grasses in the southeast United States before pCO2 fell. In application of SPIRAL to the late Quaternary, we found that shifts in pCO2 and moisture balance exerted key controls on the relative abundance of C3 and C4 grasses in Africa and Australia. Overall, our results imply that as in the past, future changes in the C3/C4 composition of grass-dominated ecosystems will likely exhibit striking spatiotemporal variability as a result of differing combinations of

  5. Data Validation Package - June 2016 Groundwater and Surface Water Sampling at the Green River, Utah, Disposal Site

    Energy Technology Data Exchange (ETDEWEB)

    Linard, Joshua [USDOE Office of Legacy Management, Washington, DC (United States); Price, Jeffrey [Navarro Research and Engineering, Inc., Las Vegas, NV (United States)

    2016-10-10

    This event included annual sampling of groundwater and surface water locations at the Green River, Utah, Disposal Site. Sampling and analyses were conducted as specified in Sampling and Analysis Plan for US. Department of Energy Office of Legacy Management Sites (LMS/PRO/S04351, continually updated, http://energy.gov/lrnldownloads/sampling-and- analysis-plan-us-department-energy-office-legacy-management-sites). Samples were collected from 15 monitoring wells and two surface locations at the disposal site as specified in the draft 2011 Ground Water Compliance Action Plan for the Green River, Utah, Disposal Site. Planned monitoring locations are shown in Attachment 1, Sampling and Analysis Work Order. A duplicate sample was collected from location 0179. One equipment blank was collected during this sampling event. Water levels were measured at all monitoring wells that were sampled. See Attachment 2, Trip Reports for additional details. The analytical data and associated qualifiers can be viewed in environmental database reports and are also available for viewing with dynamic mapping via the GEMS (Geospatial Environmental Mapping System) website at http://gems.lm.doe.gov/#. No issues were identified during the data validation process that requires additional action or follow-up.

  6. April 2012 Groundwater and Surface Water Sampling at the Salmon, Mississippi, Site (Data Validation Package)

    Energy Technology Data Exchange (ETDEWEB)

    Duray, Jack [S.M. Stoller Corporation, Broomfield, CO (United States)

    2012-10-12

    Sampling and analysis were conducted on April 16-19, 2012, as specified in the Sampling and Analysis Plan for U.S. Department of Energy Office Of Legacy Management Sites (LMS/PLN/S04351, continually updated). Duplicate samples were collected from locations SA1-1-H, HMH-5R, SA3-4-H, SA1-2-H, Pond W of GZ, and SA5-4-4. One trip blank was collected during this sampling event.

  7. Pollen and spore monitoring in the world.

    Science.gov (United States)

    Buters, J T M; Antunes, C; Galveias, A; Bergmann, K C; Thibaudon, M; Galán, C; Schmidt-Weber, C; Oteros, J

    2018-01-01

    Ambient air quality monitoring is a governmental duty that is widely carried out in order to detect non-biological ("chemical") components in ambient air, such as particles of world and to create an interactive visualization of their distribution. The method employed to collect information was based on: (a) a review of the recent and historical bibliography related to pollen and fungal spore monitoring, and (b) personal surveys of the managers of national and regional monitoring networks. The interactive application was developed using the R programming language. We have created an inventory of the active pollen and spore monitoring stations in the world. There are at least 879 active pollen monitoring stations in the world, most of which are in Europe (> 500). The prevalent monitoring method is based on the Hirst principle (> 600 stations). The inventory is visualised as an interactive and on-line map. It can be searched, its appearance can be adjusted to the users' needs and it is updated regularly, as new stations or changes to those that already exist can be submitted online. The map shows the current situation of pollen and spore monitoring and facilitates collaboration among those individuals who are interested in pollen and spore counts. It might also help to improve the monitoring of biological particles up to the current level employed for non-biological components.

  8. Compound pollen cone in a Paleozoic conifer.

    Science.gov (United States)

    Hernandez-Castillo, G R; Rothwell, G W; Mapes, G

    2001-06-01

    A rich fossil biota from a Pennsylvanian age deposit of eastern North America contains numerous vegetative and fertile specimens that conform to a single species of primitive walchian conifers. Among the specimens is a compound pollen cone that comprises closely spaced, helically arranged, leaf-like bracts with axillary dwarf shoots. The specimen looks superficially similar to an ultimate vegetative conifer shoot, but there are small appendages in the axil of each bract that represent the fertile dwarf shoots. Dwarf shoots consist of an axis that bears sterile scales and sporophylls with erect pollen sacs. Pollen found in the sacs is monosaccate and conforms to the sporae dispersae genus Potonieisporites Bhardwaj. This cone is a compound shoot system that is morphologically equivalent to the ovulate cones of conifers and to the pollen cones of Paleozoic cordaitaleans and modern gnetophytes. Therefore, it is fundamentally different from the simple pollen cones of other fossil and modern conifers. Discovery of this specimen unexpectedly supports molecular studies that predict a close relationship between Coniferales and Gnetales, and provides fossil evidence to help reconcile the discordant phylogenetic hypotheses of seed plant systematics that have been developed from morphological and molecular data.

  9. Infectivity of DWV associated to flower pollen: experimental evidence of a horizontal transmission route.

    Directory of Open Access Journals (Sweden)

    Maurizio Mazzei

    Full Text Available Deformed wing virus (DWV is a honeybee pathogen whose presence is generally associated with infestation of the colony by the mite Varroa destructor, leading to the onset of infections responsible for the collapse of the bee colony. DWV contaminates bee products such as royal jelly, bee-bread and honey stored within the infected hive. Outside the hive, DWV has been found in pollen loads collected directly from infected as well as uninfected forager bees. It has been shown that the introduction of virus-contaminated pollen into a DWV-free hive results in the production of virus-contaminated food, whose role in the development of infected bees from virus-free eggs has been experimentally demonstrated. The aim of this study was twofold: (i to ascertain the presence of DWV on pollen collected directly from flowers visited by honeybees and then quantify the viral load and (ii determine whether the virus associated with pollen is infective. The results of our investigation provide evidence that DWV is present on pollen sampled directly from visited flowers and that, following injection in individuals belonging to the pollinator species Apis mellifera, it is able to establish an active infection, as indicated by the presence of replicating virus in the head of the injected bees. We also provide the first indication that the pollinator species Osmia cornuta is susceptible to DWV infection.

  10. Uncertainty analysis of point by point sampling complex surfaces using touch probe CMMs

    DEFF Research Database (Denmark)

    Barini, Emanuele; Tosello, Guido; De Chiffre, Leonardo

    2007-01-01

    The paper describes a study concerning point by point scanning of complex surfaces using tactile CMMs. A four factors-two level full factorial experiment was carried out, involving measurements on a complex surface configuration item comprising a sphere, a cylinder and a cone, combined in a singl...

  11. Occupational Allergy to Peach (Prunus persica) Tree Pollen and Potential Cross-Reactivity between Rosaceae Family Pollens.

    Science.gov (United States)

    Jiang, Nannan; Yin, Jia; Mak, Philip; Wen, Liping

    2015-10-01

    Orchard workers in north China are highly exposed to orchard pollens, especially peach and other Rosaceae family pollens during pollination season. The aim of this study was to investigate whether occupational allergy to peach tree pollen as a member of Rosaceae family is IgE-mediated and to evaluate the cross-reactivity among Rosaceae family pollens. Allergen skin test and conjunctival challenge test were performed; enzyme linked immune-sorbent assay (ELISA), inhibiting ELISA, western immunoblotting and inhibiting western immunoblotting were done with Rosaceae family orchard pollens, including peach, apricot, cherry, apple and pear tree pollens. Mass spectrometry was also performed to probe the main allergen component and cross-reactive protein. Sensitizations to peach pollen were found in both skin test and conjunctival challenge in the patients. Serum specific IgE to three pollens (peach, apricot and cherry) were detected through ELISA. When peach pollen used as solid phase, ELISA inhibition revealed other four kinds of pollens capable of inducing partial to strong inhibitions (45% to 87%), with the strongest inhibition belonging to apricot pollen (87%). Western blotting showed predominant IgE binding to a 20 KD protein among these pollens, which appeared to be a cross-reactive allergen component through western blotting inhibition. It was recognized as a protein homologous to glutathione s-transferase 16 from Arabidopsis thaliana. Peach and other Rosaceae family tree pollen may serve as a potential cause of IgE mediated occupational respiratory disease in orchard workers in north China.

  12. Linking pollen deposition and snow accumulation on the Alto dell'Ortles glacier (South Tyrol, Italy) for sub-seasonal dating of a firn core

    Science.gov (United States)

    Festi, Daniela; Carturan, Luca; Kofler, Werner; dalla Fontana, Giancarlo; de Blasi, Fabrizio; Cazorzi, Federico; Bucher, Edith; Mair, Volkmar; Gabrielli, Paolo; Oeggl, Klaus

    2017-04-01

    Dating of ice cores from non-polar glaciers is challenging and often problematic. Yet, a proper timescale is essential for a correct interpretation of the proxies measured in the cores. Here we present a multi-disciplinary approach developed to obtain a high resolution timescale for a 10 m firn core retrieved from the Alto dell'Ortles Glacier (Italy). Results indicate that the core encompasses five accumulation years. A high resolution timescale was established by means of statistical analyses, comparing glacier pollen assemblages with daily pollen monitoring assemblages from Solda (base of Mt. Ortles). Ortles snow samples are characterised by their depth and pollen spectra, while Solda's samples are characterised by their pollen spectra and specific date. Thus, by finding for an Ortles sample the most similar Solda's sample according to their pollen content, we established a direct depth-to-day link. In this way every snow sample containing pollen has been dated. Finally, the timescale was compared with results from a mass balance model run at the drilling site. The comparison of the two independent dating methods enabled a better understanding of depositional and post depositional processes affecting pollen, dD, snow and firn at the study site. Finally, we provide an example of useful application of the timescale related to the direct comparison of measured meteorological parameters and the stable isotopes composition of the core.

  13. Pollen proteomics: from stress physiology to developmental priming.

    Science.gov (United States)

    Chaturvedi, Palak; Ghatak, Arindam; Weckwerth, Wolfram

    2016-06-01

    Pollen development and stress. In angiosperms, pollen or pollen grain (male gametophyte) is a highly reduced two- or three-cell structure which plays a decisive role in plant reproduction. Male gametophyte development takes place in anther locules where diploid sporophytic cells undergo meiotic division followed by two consecutive mitotic processes. A desiccated and metabolically quiescent form of mature pollen is released from the anther which lands on the stigma. Pollen tube growth takes place followed by double fertilization. Apart from its importance in sexual reproduction, pollen is also an interesting model system which integrates fundamental cellular processes like cell division, differentiation, fate determination, polar establishment, cell to cell recognition and communication. Recently, pollen functionality has been studied by multidisciplinary approaches which also include OMICS analyses like transcriptomics, proteomics and metabolomics. Here, we review recent advances in proteomics of pollen development and propose the process of developmental priming playing a key role to guard highly sensitive developmental processes.

  14. [Hypersensitivity to pollen of Olea europea in patients with pollen allergy in Zadar County, Croatia].

    Science.gov (United States)

    Skitarelić, Natasa; Mazzi, Antun; Skitarelić, Neven; Misulić, Josko; Vuletić, Ana

    2010-06-01

    Olive pollen is one of the most common respiratory allergens in the Mediterranean countries. The aim of this study was to establish the frequency of hypersensitivity to the pollen of Olea europea in pollen allergic patients in the County of Zadar. The study included 671 patients with pollen allergy; 61 % were male and 39 % female. 53.5 % were children aged from 4 to 14 years and 46.5 % adolescents and adults from 15 to 59 years. We took their case history, clinically examined them, and tested using the skin prick test and enzymo-immunologic UniCAP test for specific IgE antibodies. For statistical analysis we u