WorldWideScience

Sample records for surface model dsm

  1. Specular and diffuse object extraction from a LiDAR derived Digital Surface Model (DSM)

    International Nuclear Information System (INIS)

    Saraf, N M; Hamid, J R A; Kamaruddin, M H

    2014-01-01

    This paper intents to investigate the indifferent behaviour quantitatively of target objects of interest due to specular and diffuse reflectivity based on generated LiDAR DSM of the study site in Ampang, Kuala Lumpur. The LiDAR data to be used was initially checked for its reliability and accuracy. The point cloud LiDAR data was converted to raster to allow grid analysis of the next process of generating the DSM and DTM. Filtering and masking were made removing the features of interest (i.e. building and tree) and other unwanted above surface features. A normalised DSM and object segmentation approach were conducted on the trees and buildings separately. Error assessment and findings attained were highlighted and documented. The result of LiDAR verification certified that the data is reliable and useable. The RMSE obtained is within the tolerance value of horizontal and vertical accuracy (x, y, z) i.e. 0.159 m, 0.211 m 0.091 m respectively. Building extraction inclusive of roof top based on slope and contour analysis undertaken indicate the capability of the approach while single tree extraction through aspect analysis appears to preserve the accuracy of the extraction accordingly. The paper has evaluated the suitable methods of extracting non-ground features and the effective segmentation of the LiDAR data

  2. Generation of Digital Surface Models from satellite photogrammetry: the DSM-OPT service of the ESA Geohazards Exploitation Platform (GEP)

    Science.gov (United States)

    Stumpf, André; Michéa, David; Malet, Jean-Philippe

    2017-04-01

    The continuously increasing fleet of agile stereo-capable very-high resolution (VHR) optical satellites has facilitated the acquisition of multi-view images of the earth surface. Theoretical revisit times have been reduced to less than one day and the highest spatial resolution which is commercially available amounts now to 30 cm/pixel. Digital Surface Models (DSM) and point clouds computed from such satellite stereo-acquisitions can provide valuable input for studies in geomorphology, tectonics, glaciology, hydrology and urban remote sensing The photogrammetric processing, however, still requires significant expertise, computational resources and costly commercial software. To enable a large Earth Science community (researcher and end-users) to process easily and rapidly VHR multi-view images, the work targets the implementation of a fully automatic satellite-photogrammetry pipeline (i.e DSM-OPT) on the ESA Geohazards Exploitation Platform (GEP). The implemented pipeline is based on the open-source photogrammetry library MicMac [1] and is designed for distributed processing on a cloud-based infrastructure. The service can be employed in pre-defined processing modes (i.e. urban, plain, hilly, and mountainous environments) or in an advanced processing mode (i.e. in which expert-users have the possibility to adapt the processing parameters to their specific applications). Four representative use cases are presented to illustrate the accuracy of the resulting surface models and ortho-images as well as the overall processing time. These use cases consisted of the construction of surface models from series of Pléiades images for four applications: urban analysis (Strasbourg, France), landslide detection in mountainous environments (South French Alps), co-seismic deformation in mountain environments (Central Italy earthquake sequence of 2016) and fault recognition for paleo-tectonic analysis (North-East India). Comparisons of the satellite-derived topography to airborne

  3. Planialtimetric Accuracy Evaluation of Digital Surface Model (dsm) and Digital Terrain Model (dtm) Obtained from Aerial Survey with LIDAR

    Science.gov (United States)

    Cruz, C. B. M.; Barros, R. S.; Rabaco, L. M. L.

    2012-07-01

    It's noticed a significant increase in the development of orbital and airborne sensors that enable the extraction of three-dimensional data. Consequently, it's important the increment of studies about the quality of altimetric values derived from these sensors to verify if the improvements implemented in the acquisition of data may influence the results. In this context, as part of a larger project that aims to evaluate the accuracy of various sensors, this work aims to analysis the planialtimetric accuracy of DSM and DTM generated from an aerial survey with LIDAR, using as reference for the planimetric analysis of the orthophotos obtained. The project was developed for an area of São Sebastião city, located in the basin of the North Coast of São Paulo state. The area's relief is very steep, with a predominance of dense forest vegetation, typical of the Atlantic Forest. All points have been established in the field, with the use of GNSS of one frequency (L1) through static relative positioning, acquiring a minimum of 1,500 epochs, for a distance less than 20 km to the base. In this work it's considered the Brazilian standard specifications for classification of cartographic bases (PEC). The Brazilian company responsible for the aerial survey (LACTEC) gave the following products for analysis: point clouds in raw format (x, y, z) using orthometric heights; point clouds (first and last pulse) for each range of flight to verify systematic errors; DTM uniformly spaced, filtering small natural obstacles, buildings and vegetation, in Geotiff format; DSM also uniformly spaced, in Geotiff format; and the mosaic of georeferenced digital images. The analysis realized on products from the LIDAR indicated their adoption to the scales 1:2,000 (Class A for the orthophotos and Class B for the DTM) and 1:5,000 (class C for the DSM). There were no indications of trends in the results. The average error was 0.01 m. It's important that new areas with different topographic

  4. PLANIALTIMETRIC ACCURACY EVALUATION OF DIGITAL SURFACE MODEL (DSM AND DIGITAL TERRAIN MODEL (DTM OBTAINED FROM AERIAL SURVEY WITH LIDAR

    Directory of Open Access Journals (Sweden)

    C. B. M. Cruz

    2012-07-01

    Full Text Available It’s noticed a significant increase in the development of orbital and airborne sensors that enable the extraction of three-dimensional data. Consequently, it's important the increment of studies about the quality of altimetric values derived from these sensors to verify if the improvements implemented in the acquisition of data may influence the results. In this context, as part of a larger project that aims to evaluate the accuracy of various sensors, this work aims to analysis the planialtimetric accuracy of DSM and DTM generated from an aerial survey with LIDAR, using as reference for the planimetric analysis of the orthophotos obtained. The project was developed for an area of São Sebastião city, located in the basin of the North Coast of São Paulo state. The area's relief is very steep, with a predominance of dense forest vegetation, typical of the Atlantic Forest. All points have been established in the field, with the use of GNSS of one frequency (L1 through static relative positioning, acquiring a minimum of 1,500 epochs, for a distance less than 20 km to the base. In this work it's considered the Brazilian standard specifications for classification of cartographic bases (PEC. The Brazilian company responsible for the aerial survey (LACTEC gave the following products for analysis: point clouds in raw format (x, y, z using orthometric heights; point clouds (first and last pulse for each range of flight to verify systematic errors; DTM uniformly spaced, filtering small natural obstacles, buildings and vegetation, in Geotiff format; DSM also uniformly spaced, in Geotiff format; and the mosaic of georeferenced digital images. The analysis realized on products from the LIDAR indicated their adoption to the scales 1:2,000 (Class A for the orthophotos and Class B for the DTM and 1:5,000 (class C for the DSM. There were no indications of trends in the results. The average error was 0.01 m. It's important that new areas with different

  5. Alternative models of DSM-5 PTSD

    DEFF Research Database (Denmark)

    Murphy, Siobhan; Hansen, Maj; Elklit, Ask

    2018-01-01

    The factor structure of DSM-5 posttraumatic stress disorder (PTSD) has been extensively debated with evidence supporting the recently proposed seven-factor Hybrid model. However, despite myriad studies examining PTSD symptom structure few have assessed the diagnostic implications of these proposed...... models. This study aimed to generate PTSD prevalence estimates derived from the 7 alternative factor models and assess whether pre-established risk factors associated with PTSD (e.g., transportation accidents and sexual victimisation) produce consistent risk estimates. Seven alternative models were...... estimated within a confirmatory factor analytic framework using the PTSD Checklist for DSM-5 (PCL-5). Data were analysed from a Malaysian adolescent community sample (n=481) of which 61.7% were female, with a mean age of 17.03 years. The results indicated that all models provided satisfactory model fit...

  6. A DSM-based framework for integrated function modelling

    DEFF Research Database (Denmark)

    Eisenbart, Boris; Gericke, Kilian; Blessing, Lucienne T. M.

    2017-01-01

    an integrated function modelling framework, which specifically aims at relating between the different function modelling perspectives prominently addressed in different disciplines. It uses interlinked matrices based on the concept of DSM and MDM in order to facilitate cross-disciplinary modelling and analysis...

  7. "DSM IV," "DSM-5," and the Five-Factor Model: the Diagnosis of Personality Disorder with Intellectual and Developmental Disabilities

    Science.gov (United States)

    Lindsay, William R.; Steptoe, Lesley; McVicker, Ronnie; Haut, Fabian; Robertson, Colette

    2018-01-01

    In "DSM-5" there has been a move to dimensional personality disorder (PD) diagnosis, incorporating personality theory in the form of the five-factor model (FFM). It proposes an alternative assessment system based on diagnostic indicators and the FFM, while retaining "DSM-IV" categorical criteria. Four individuals with…

  8. Alternative models of DSM-5 PTSD: Examining diagnostic implications.

    Science.gov (United States)

    Murphy, Siobhan; Hansen, Maj; Elklit, Ask; Yong Chen, Yoke; Raudzah Ghazali, Siti; Shevlin, Mark

    2018-04-01

    The factor structure of DSM-5 posttraumatic stress disorder (PTSD) has been extensively debated with evidence supporting the recently proposed seven-factor Hybrid model. However, despite myriad studies examining PTSD symptom structure few have assessed the diagnostic implications of these proposed models. This study aimed to generate PTSD prevalence estimates derived from the 7 alternative factor models and assess whether pre-established risk factors associated with PTSD (e.g., transportation accidents and sexual victimisation) produce consistent risk estimates. Seven alternative models were estimated within a confirmatory factor analytic framework using the PTSD Checklist for DSM-5 (PCL-5). Data were analysed from a Malaysian adolescent community sample (n = 481) of which 61.7% were female, with a mean age of 17.03 years. The results indicated that all models provided satisfactory model fit with statistical superiority for the Externalising Behaviours and seven-factor Hybrid models. The PTSD prevalence estimates varied substantially ranging from 21.8% for the DSM-5 model to 10.0% for the Hybrid model. Estimates of risk associated with PTSD were inconsistent across the alternative models, with substantial variation emerging for sexual victimisation. These findings have important implications for research and practice and highlight that more research attention is needed to examine the diagnostic implications emerging from the alternative models of PTSD. Copyright © 2017 Elsevier B.V. All rights reserved.

  9. When What You See Isn’t What You Get: How Viewshed Analysis is Impacted by Digital Surface Model (DSM) Resolution

    Science.gov (United States)

    A key factor for improving models of ecosystem benefits is the availability of high quality spatial data. High resolution LIDAR data are now commonly available and can be used to produce more accurate model outputs. However, increased resolution leads to higher computer resource...

  10. Convergence between DSM-IV-TR and DSM-5 diagnostic models for personality disorder: evaluation of strategies for establishing diagnostic thresholds.

    Science.gov (United States)

    Morey, Leslie C; Skodol, Andrew E

    2013-05-01

    The Personality and Personality Disorders Work Group for the Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition (DSM-5) recommended substantial revisions to the personality disorders (PDs) section of DSM-IV-TR, proposing a hybrid categorical-dimensional model that represented PDs as combinations of core personality dysfunctions and various configurations of maladaptive personality traits. Although the DSM-5 Task Force endorsed the proposal, the Board of Trustees of the American Psychiatric Association (APA) did not, placing the Work Group's model in DSM-5 Section III ("Emerging Measures and Models") with other concepts thought to be in need of additional research. This paper documents the impact of using this alternative model in a national sample of 337 patients as described by clinicians familiar with their cases. In particular, the analyses focus on alternative strategies considered by the Work Group for deriving decision rules, or diagnostic thresholds, with which to assign categorical diagnoses. Results demonstrate that diagnostic rules could be derived that yielded appreciable correspondence between DSM-IV-TR and proposed DSM-5 PD diagnoses-correspondence greater than that observed in the transition between DSM-III and DSM-III-R PDs. The approach also represents the most comprehensive attempt to date to provide conceptual and empirical justification for diagnostic thresholds utilized within the DSM PDs.

  11. The New Alternative DSM-5 Model for Personality Disorders: Issues and Controversies

    Science.gov (United States)

    Porter, Jeffrey S.; Risler, Edwin

    2014-01-01

    Purpose: Assess the new alternative "Diagnostic and Statistical Manual of Mental Disorders", fifth edition (DSM-5) model for personality disorders (PDs) as it is seen by its creators and critics. Method: Follow the DSM revision process by monitoring the American Psychiatric Association website and the publication of pertinent journal…

  12. The DSM-5 dimensional trait model and five-factor models of general personality.

    Science.gov (United States)

    Gore, Whitney L; Widiger, Thomas A

    2013-08-01

    The current study tests empirically the relationship of the dimensional trait model proposed for the fifth edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM-5) with five-factor models of general personality. The DSM-5 maladaptive trait dimensional model proposal included 25 traits organized within five broad domains (i.e., negative affectivity, detachment, antagonism, disinhibition, and psychoticism). Consistent with the authors of the proposal, it was predicted that negative affectivity would align with five-factor model (FFM) neuroticism, detachment with FFM introversion, antagonism with FFM antagonism, disinhibition with low FFM conscientiousness and, contrary to the proposal; psychoticism would align with FFM openness. Three measures of alternative five-factor models of general personality were administered to 445 undergraduates along with the Personality Inventory for DSM-5. The results provided support for the hypothesis that all five domains of the DSM-5 dimensional trait model are maladaptive variants of general personality structure, including the domain of psychoticism. PsycINFO Database Record (c) 2013 APA, all rights reserved.

  13. Clinical Utility of the DSM-5 Alternative Model of Personality Disorders

    DEFF Research Database (Denmark)

    Bach, Bo; Markon, Kristian; Simonsen, Erik

    2015-01-01

    In Section III, Emerging Measures and Models, DSM-5 presents an Alternative Model of Personality Disorders, which is an empirically based model of personality pathology measured with the Level of Personality Functioning Scale (LPFS) and the Personality Inventory for DSM-5 (PID-5). These novel...... (involving a comparison of presenting problems, history, and diagnoses) and used to formulate treatment considerations. We also considered 6 specific personality disorder types that could be derived from the profiles as defined in the DSM-5 Section III criteria. Results. Using the LPFS and PID-5, we were...... evaluation generally supported the utility for clinical purposes of the Alternative Model for Personality Disorders in Section III of the DSM-5, although it also identified some areas for refinement....

  14. Comparing the dependability and associations with functioning of the DSM-5 Section III trait model of personality pathology and the DSM-5 Section II personality disorder model.

    Science.gov (United States)

    Chmielewski, Michael; Ruggero, Camilo J; Kotov, Roman; Liu, Keke; Krueger, Robert F

    2017-07-01

    Two competing models of personality psychopathology are included in the fifth edition of the Diagnostic Statistical Manual of Mental Disorders ( DSM-5 ; American Psychiatric Association, 2013); the traditional personality disorder (PD) model included in Section II and an alternative trait-based model included in Section III. Numerous studies have examined the validity of the alternative trait model and its official assessment instrument, the Personality Inventory for DSM-5 (PID-5; Krueger, Derringer, Markon, Watson, & Skodol, 2012). However, few studies have directly compared the trait-based model to the traditional PD model empirically in the same dataset. Moreover, to our knowledge, only a single study (Suzuki, Griffin, & Samuel, 2015) has examined the dependability of the PID-5, which is an essential component of construct validity for traits (Chmielewski & Watson, 2009; McCrae, Kurtz, Yamagata, & Terracciano, 2011). The current study directly compared the dependability of the DSM-5 traits, as assessed by the PID-5, and the traditional PD model, as assessed by the Personality Diagnostic Questionnaire-4 (PDQ-4+), in a large undergraduate sample. In addition, it evaluated and compared their associations with functioning, another essential component of personality pathology. In general, our findings indicate that most DSM-5 traits demonstrate high levels of dependability that are superior to the traditional PD model; however, some of the constructs assessed by the PID-5 may be more state like. The models were roughly equivalent in terms of their associations with functioning. The current results provide additional support for the validity of PID-5 and the DSM-5 Section III personality pathology model. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  15. The relationship between the Five-Factor Model and latent DSM-IV personality disorder dimensions

    OpenAIRE

    Nestadt, Gerald; Costa, Paul T.; Hsu, Fang-Chi; Samuels, Jack; Bienvenu, O. Joseph; Eaton, William W.

    2007-01-01

    This study compared the latent structure of the DSM-IV personality disorders to the Five-Factor Model (FFM) of general personality dimensions. The subjects in the study were 742 community-residing individuals who participated in the Hopkins Epidemiology of Personality Disorder Study. DSM-IV personality disorder traits were assessed by psychologists using the International Personality Disorder Examination, and personality disorder dimensions were derived previously using dichotomous factor ana...

  16. Dimensional structure of DSM-5 posttraumatic stress symptoms: support for a hybrid Anhedonia and Externalizing Behaviors model.

    Science.gov (United States)

    Armour, Cherie; Tsai, Jack; Durham, Tory A; Charak, Ruby; Biehn, Tracey L; Elhai, Jon D; Pietrzak, Robert H

    2015-02-01

    Several revisions to the symptom clusters of posttraumatic stress disorder (PTSD) have been made in the 5th edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM-5). Central to the focus of this study was the revision of PTSD's tripartite structure in DSM-IV into four symptom clusters in DSM-5. Emerging confirmatory factor analytic (CFA) studies have suggested that DSM-5 PTSD symptoms may be best represented by one of two 6-factor models: (1) an Externalizing Behaviors model characterized by a factor which combines the irritability/anger and self-destructive/reckless behavior items; and (2) an Anhedonia model characterized by items of loss of interest, detachment, and restricted affect. The current study conducted CFAs of DSM-5 PTSD symptoms assessed using the PTSD Checklist for DSM-5 (PCL-5) in two independent and diverse trauma-exposed samples of a nationally representative sample of 1484 U.S. veterans and a sample of 497 Midwestern U.S. university undergraduate students. Relative fits of the DSM-5 model, the DSM-5 Dysphoria model, the DSM-5 Dysphoric Arousal model, the two 6-factor models, and a newly proposed 7-factor Hybrid model, which consolidates the two 6-factor models, were evaluated. Results revealed that, in both samples, both 6-factor models provided significantly better fit than the 4-factor DSM-5 model, the DSM-5 Dysphoria model and the DSM-5 Dysphoric Arousal model. Further, the 7-factor Hybrid model, which incorporates key features of both 6-factor models and is comprised of re-experiencing, avoidance, negative affect, anhedonia, externalizing behaviors, and anxious and dysphoric arousal symptom clusters, provided superior fit to the data in both samples. Results are discussed in light of theoretical and empirical support for the latent structure of DSM-5 PTSD symptoms. Copyright © 2014 Elsevier Ltd. All rights reserved.

  17. Personality disorders in DSM-5: emerging research on the alternative model.

    Science.gov (United States)

    Morey, Leslie C; Benson, Kathryn T; Busch, Alexander J; Skodol, Andrew E

    2015-04-01

    The current categorical classification of personality disorders, originally introduced in the Diagnostic and Statistical Manual of Mental Disorders (DSM-III), has been found to suffer from numerous shortcomings that hamper its usefulness for research and for clinical application. The Personality and Personality Disorders Work Group for DSM-5 was charged with developing an alternative model that would address many of these concerns. The developed model involved a hybrid dimensional/categorical model that represented personality disorders as combinations of core impairments in personality functioning with specific configurations of problematic personality traits. The Board of Trustees of the American Psychiatric Association did not accept the Task Force recommendation to implement this novel approach, and thus this alternative model was included in Sect. III of the DSM-5 among concepts requiring additional study. This review provides an overview of the emerging research on this alternative model, addressing each of the primary components of the model.

  18. Dimensional models of personality: the five-factor model and the DSM-5.

    Science.gov (United States)

    Trull, Timothy J; Widiger, Thomas A

    2013-06-01

    It is evident that the classification of personality disorder is shifting toward a dimensional trait model and, more specifically, the five-factor model (FFM). The purpose of this paper is to provide an overview of the FFM of personality disorder. It will begin with a description of this dimensional model of normal and abnormal personality functioning, followed by a comparison with a proposal for future revisions to DSM-5 and a discussion of its potential advantages as an integrative hierarchical model of normal and abnormal personality structure.

  19. Dimensional models of personality: the five-factor model and the DSM-5

    Science.gov (United States)

    Trull, Timothy J.; Widiger, Thomas A.

    2013-01-01

    It is evident that the classification of personality disorder is shifting toward a dimensional trait model and, more specifically, the five-factor model (FFM). The purpose of this paper is to provide an overview of the FFM of personality disorder. It will begin with a description of this dimensional model of normal and abnormal personality functioning, followed by a comparison with a proposal for future revisions to DSM-5 and a discussion of its potential advantages as an integrative hierarchical model of normal and abnormal personality structure. PMID:24174888

  20. A Family Study of the DSM-5 Section III Personality Pathology Model Using the Personality Inventory for the DSM-5 (PID-5).

    Science.gov (United States)

    Katz, Andrea C; Hee, Danelle; Hooker, Christine I; Shankman, Stewart A

    2017-10-03

    In Section III of the DSM-5, the American Psychiatric Association (APA) proposes a pathological personality trait model of personality disorders. The recommended assessment instrument is the Personality Inventory for the DSM-5 (PID-5), an empirically derived scale that assesses personality pathology along five domains and 25 facets. Although the PID-5 demonstrates strong convergent validity with other personality measures, no study has examined whether it identifies traits that run in families, another important step toward validating the DSM-5's dimensional model. Using a family study method, we investigated familial associations of PID-5 domain and facet scores in 195 families, examining associations between parents and offspring and across siblings. The Psychoticism, Antagonism, and Detachment domains showed significant familial aggregation, as did facets of Negative Affect and Disinhibition. Results are discussed in the context of personality pathology and family study methodology. The results also help validate the PID-5, given the familial nature of personality traits.

  1. VT Lidar DSM (1 meter) - 2005 - Essex

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) This metadata applies to the following collection area(s): Essex County 2005 1m and related Digital Surface Model (DSM) data. This metadata...

  2. Examining the dimensional structure models of secondary traumatic stress based on DSM-5 symptoms.

    Science.gov (United States)

    Mordeno, Imelu G; Go, Geraldine P; Yangson-Serondo, April

    2017-02-01

    Latent factor structure of Secondary Traumatic Stress (STS) has been examined using Diagnostic Statistic Manual-IV (DSM-IV)'s Posttraumatic Stress Disorder (PTSD) nomenclature. With the advent of Diagnostic Statistic Manual-5 (DSM-5), there is an impending need to reexamine STS using DSM-5 symptoms in light of the most updated PTSD models in the literature. The study investigated and determined the best fitted PTSD models using DSM-5 PTSD criteria symptoms. Confirmatory factor analysis (CFA) was conducted to examine model fit using the Secondary Traumatic Stress Scale in 241 registered and practicing Filipino nurses (166 females and 75 males) who worked in the Philippines and gave direct nursing services to patients. Based on multiple fit indices, the results showed the 7-factor hybrid model, comprising of intrusion, avoidance, negative affect, anhedonia, externalizing behavior, anxious arousal, and dysphoric arousal factors has excellent fit to STS. This model asserts that: (1) hyperarousal criterion needs to be divided into anxious and dysphoric arousal factors; (2) symptoms characterizing negative and positive affect need to be separated to two separate factors, and; (3) a new factor would categorize externalized, self-initiated impulse and control-deficit behaviors. Comparison of nested and non-nested models showed Hybrid model to have superior fit over other models. The specificity of the symptom structure of STS based on DSM-5 PTSD criteria suggests having more specific interventions addressing the more elaborate symptom-groupings that would alleviate the condition of nurses exposed to STS on a daily basis. Copyright © 2016 Elsevier B.V. All rights reserved.

  3. The convergent structure of DSM-5 personality trait facets and five-factor model trait domains.

    Science.gov (United States)

    Thomas, Katherine M; Yalch, Matthew M; Krueger, Robert F; Wright, Aidan G C; Markon, Kristian E; Hopwood, Christopher J

    2013-06-01

    The DSM-5 Personality and Personality Disorder Work Group have proposed diagnosing personality disorder based in part on 25 pathological traits. Initial research suggests that five factors explain the covariance among these traits and that these factors reflect the domains of the well-validated Five-Factor Model (FFM) of normative personality. This finding is important because it signifies the potential to apply normative trait research to personality disorder classification in the DSM-5. In this study, trait scale scores on the Personality Inventory for DSM-5 (PID-5) and domain scores from the FFM Rating Form (FFMRF) were subjected to a conjoint exploratory factor analysis (EFA) to test the higher-order convergence of the DSM-5 pathological trait model and the FFM in a nonclinical sample (N = 808). Results indicate that the five higher-order factors of the conjoint EFA reflect the domains of the FFM. The authors briefly discuss implications of this correspondence between the normative FFM and the pathological PID-5.

  4. Negative emotionality across diagnostic models: RDoC, DSM-5 Section III, and FFM.

    Science.gov (United States)

    Gore, Whitney L; Widiger, Thomas A

    2018-03-01

    The research domain criteria (RDoC) were established in an effort to explore underlying dimensions that cut across many existing disorders and to provide an alternative to the Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition (DSM-5). One purpose of the present study was to suggest a potential alignment of RDoC negative valence with 2 other dimensional models of negative emotionality: five-factor model (FFM) neuroticism and the DSM-5 Section III negative affectivity. A second purpose of the study, though, was to compare their coverage of negative emotionality, more specifically with respect to affective instability. Participants were adult community residents (N = 90) currently in mental health treatment. Participants received self-report measures of RDoC negative valence, FFM neuroticism, and DSM-5 Section III negative affectivity, along with measures of affective instability, borderline personality disorder, and impairment. Findings suggested that RDoC negative valence is commensurate with FFM neuroticism and DSM-5 Section III negative affectivity, and it would be beneficial if it was expanded to include affective instability. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  5. The Five-Factor Model of personality disorder and DSM-5.

    Science.gov (United States)

    Trull, Timothy J

    2012-12-01

    The Five-Factor Model of personality disorders (FFMPD; Widiger & Mullins-Sweatt, ) developed from the recognition that the popular Five-Factor Model (FFM) of personality could be used to describe and understand the official personality disorder (PD) constructs from the American Psychiatric Association's (APA) diagnostic manuals (e.g., DSM-IV-TR, APA, ). This article provides an overview of the FFM, highlighting its validity and utility in characterizing PDs as well as its ability to provide a comprehensive account of personality pathology in general. In 2013, DSM-5 is scheduled to appear, and the "hybrid" PD proposal will emphasize a 25-personality trait model. I present the current version of this new model, compare it to the FFMPD, and discuss issues related to the implementation of the FFMPD. © 2012 The Author. Journal of Personality © 2012, Wiley Periodicals, Inc.

  6. DSM-5 Personality Traits and DSM-IV Personality Disorders

    Science.gov (United States)

    Hopwood, Christopher J.; Thomas, Katherine M.; Markon, Kristian E.; Wright, Aidan G.C.; Krueger, Robert F.

    2014-01-01

    Two issues pertinent to the DSM-5 proposal for personality pathology, the recovery of DSM-IV personality disorders (PDs) by proposed DSM-5 traits and the validity of the proposed DSM-5 hybrid model which incorporates both personality pathology symptoms and maladaptive traits, were evaluated in a large undergraduate sample (N = 808). Proposed DSM-5 traits as assessed with the Personality Inventory for DSM-5 explained a substantial proportion of variance in DSM-IV PDs as assessed with the Personality Diagnostic Questionnaire-4+, and trait indicators of the six proposed DSM-5 PDs were mostly specific to those disorders with some exceptions. Regression analyses support the DSM-5 hybrid model in that pathological traits and an indicator of general personality pathology severity provided incremental information about PDs. Findings are discussed in the context of broader issues around the proposed DSM-5 model of personality disorders. PMID:22250660

  7. A framework for treating DSM-5 alternative model for personality disorder features.

    Science.gov (United States)

    Hopwood, Christopher J

    2018-04-15

    Despite its demonstrated empirical superiority over the DSM-5 Section 2 categorical model of personality disorders for organizing the features of personality pathology, limitations remain with regard to the translation of the DSM-5 Section 3 alternative model of personality disorders (AMPD) to clinical practice. The goal of this paper is to outline a general and preliminary framework for approaching treatment from the perspective of the AMPD. Specific techniques are discussed for the assessment and treatment of both Criterion A personality dysfunction and Criterion B maladaptive traits. A concise and step-by-step model is presented for clinical decision making with the AMPD, in the hopes of offering clinicians a framework for treating personality pathology and promoting further research on the clinical utility of the AMPD. Copyright © 2018 John Wiley & Sons, Ltd. Copyright © 2018 John Wiley & Sons, Ltd.

  8. INTEGRATION OF HETEROGENOUS DIGITAL SURFACE MODELS

    Directory of Open Access Journals (Sweden)

    R. Boesch

    2012-08-01

    Full Text Available The application of extended digital surface models often reveals, that despite an acceptable global accuracy for a given dataset, the local accuracy of the model can vary in a wide range. For high resolution applications which cover the spatial extent of a whole country, this can be a major drawback. Within the Swiss National Forest Inventory (NFI, two digital surface models are available, one derived from LiDAR point data and the other from aerial images. Automatic photogrammetric image matching with ADS80 aerial infrared images with 25cm and 50cm resolution is used to generate a surface model (ADS-DSM with 1m resolution covering whole switzerland (approx. 41000 km2. The spatially corresponding LiDAR dataset has a global point density of 0.5 points per m2 and is mainly used in applications as interpolated grid with 2m resolution (LiDAR-DSM. Although both surface models seem to offer a comparable accuracy from a global view, local analysis shows significant differences. Both datasets have been acquired over several years. Concerning LiDAR-DSM, different flight patterns and inconsistent quality control result in a significantly varying point density. The image acquisition of the ADS-DSM is also stretched over several years and the model generation is hampered by clouds, varying illumination and shadow effects. Nevertheless many classification and feature extraction applications requiring high resolution data depend on the local accuracy of the used surface model, therefore precise knowledge of the local data quality is essential. The commercial photogrammetric software NGATE (part of SOCET SET generates the image based surface model (ADS-DSM and delivers also a map with figures of merit (FOM of the matching process for each calculated height pixel. The FOM-map contains matching codes like high slope, excessive shift or low correlation. For the generation of the LiDAR-DSM only first- and last-pulse data was available. Therefore only the point

  9. Gender-related differential item functioning in DSM-IV/DSM-5-III (alternative model) diagnostic criteria for borderline personality disorder.

    Science.gov (United States)

    Benson, Kathryn T; Donnellan, M Brent; Morey, Leslie C

    2017-01-01

    A number of studies have evaluated the possibility of bias in the diagnostic criteria in borderline personality disorder as an explanation of gender differences in prevalence. Previous studies have used both regression and latent trait approaches but the results have been inconsistent. The current study extended prior investigations in testing differential function of Borderline diagnostic criteria using both regression and latent-trait methods in the same sample, examining both Diagnostic and Statistical Manual of Mental Disorders (4th ed.; DSM-IV ) and DSM-5 alternative model criteria for borderline personality. Data were obtained from a national sample of 337 clinicians providing diagnostic information on 1 of their target patients. Chronic feelings of emptiness was the only criterion that demonstrated consistent evidence of potential differential functioning across methods and diagnostic models. Implications of these results for the conceptualization of borderline personality are discussed. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  10. Capturing the DSM-5 Alternative Personality Disorder Model Traits in the Five-Factor Model's Nomological Net.

    Science.gov (United States)

    Suzuki, Takakuni; Griffin, Sarah A; Samuel, Douglas B

    2017-04-01

    Several studies have shown structural and statistical similarities between the Diagnostic and Statistical Manual of Mental Disorders (5th ed.; DSM-5) alternative personality disorder model and the Five-Factor Model (FFM). However, no study to date has evaluated the nomological network similarities between the two models. The relations of the Revised NEO Personality Inventory (NEO PI-R) and the Personality Inventory for DSM-5 (PID-5) with relevant criterion variables were examined in a sample of 336 undergraduate students (M age  = 19.4; 59.8% female). The resulting profiles for each instrument were statistically compared for similarity. Four of the five domains of the two models have highly similar nomological networks, with the exception being FFM Openness to Experience and PID-5 Psychoticism. Further probing of that pair suggested that the NEO PI-R domain scores obscured meaningful similarity between PID-5 Psychoticism and specific aspects and lower-order facets of Openness. The results support the notion that the DSM-5 alternative personality disorder model trait domains represent variants of the FFM domains. Similarities of Openness and Psychoticism domains were supported when the lower-order aspects and facets of Openness domain were considered. The findings support the view that the DSM-5 trait model represents an instantiation of the FFM. © 2015 Wiley Periodicals, Inc.

  11. Research Domain Criteria versus DSM V: How does this debate affect attempts to model corticostriatal dysfunction in animals?

    Science.gov (United States)

    Young, Jared W; Winstanley, Catharine A; Brady, Anne Marie; Hall, Frank Scott

    2017-05-01

    For decades, the nosology of mental illness has been based largely upon the descriptions in the Diagnostic and Statistical Manual of the American Psychiatric Association (DSM). A recent challenge to the DSM approach to psychiatric nosology from the National Institute on Mental Health (USA) defines Research Domain Criteria (RDoC) as an alternative. For RDoC, psychiatric illnesses are not defined as discrete categories, but instead as specific behavioral dysfunctions irrespective of DSM diagnostic categories. This approach was driven by two primary weaknesses noted in the DSM: (1) the same symptoms occur in very different disease states; and (2) DSM criteria lack grounding in the underlying biological causes of mental illness. RDoC intends to ground psychiatric nosology in those underlying mechanisms. This review addresses the suitability of RDoC vs. DSM from the view of modeling mental illness in animals. A consideration of all types of psychiatric dysfunction is beyond the scope of this review, which will focus on models of conditions associated with frontostriatal dysfunction. Copyright © 2016. Published by Elsevier Ltd.

  12. Hawaii demand-side management resource assessment. Final report, Reference Volume 3 -- Residential and commercial sector DSM analyses: Detailed results from the DBEDT DSM assessment model; Part 1, Technical potential

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    The Hawaii Demand-Side Management Resource Assessment was the fourth of seven projects in the Hawaii Energy Strategy (HES) program. HES was designed by the Department of Business, Economic Development, and Tourism (DBEDT) to produce an integrated energy strategy for the State of Hawaii. The purpose of Project 4 was to develop a comprehensive assessment of Hawaii`s demand-side management (DSM) resources. To meet this objective, the project was divided into two phases. The first phase included development of a DSM technology database and the identification of Hawaii commercial building characteristics through on-site audits. These Phase 1 products were then used in Phase 2 to identify expected energy impacts from DSM measures in typical residential and commercial buildings in Hawaii. The building energy simulation model DOE-2.1E was utilized to identify the DSM energy impacts. More detailed information on the typical buildings and the DOE-2.1E modeling effort is available in Reference Volume 1, ``Building Prototype Analysis``. In addition to the DOE-2.1E analysis, estimates of residential and commercial sector gas and electric DSM potential for the four counties of Honolulu, Hawaii, Maui, and Kauai through 2014 were forecasted by the new DBEDT DSM Assessment Model. Results from DBEDTs energy forecasting model, ENERGY 2020, were linked with results from DOE-2.1E building energy simulation runs and estimates of DSM measure impacts, costs, lifetime, and anticipated market penetration rates in the DBEDT DSM Model. Through its algorithms, estimates of DSM potential for each forecast year were developed. Using the load shape information from the DOE-2.1E simulation runs, estimates of electric peak demand impacts were developed. Numerous tables and figures illustrating the technical potential for demand-side management are included.

  13. DSM-5 and ICD-11 as competing models of PTSD in preadolescent children exposed to a natural disaster: assessing validity and co-occurring symptomatology.

    Science.gov (United States)

    La Greca, Annette M; Danzi, BreAnne A; Chan, Sherilynn F

    2017-01-01

    Background : Major revisions have been made to the DSM and ICD models of post-traumatic stress disorder (PTSD). However, it is not known whether these models fit children's post-trauma responses, even though children are a vulnerable population following disasters. Objective : Using data from Hurricane Ike, we examined how well trauma-exposed children's symptoms fit the DSM-IV, DSM-5 and ICD-11 models, and whether the models varied by gender. We also evaluated whether elevated symptoms of depression and anxiety characterized children meeting PTSD criteria based on DSM-5 and ICD-11. Method : Eight-months post-disaster, children ( N  = 327, 7-11 years) affected by Hurricane Ike completed measures of PTSD, anxiety and depression. Algorithms approximated a PTSD diagnosis based on DSM-5 and ICD-11 models. Results : Using confirmatory factor analysis, ICD-11 had the best-fitting model, followed by DSM-IV and DSM-5. The ICD-11 model also demonstrated strong measurement invariance across gender. Analyses revealed poor overlap between DSM-5 and ICD-11, although children meeting either set of criteria reported severe PTSD symptoms. Further, children who met PTSD criteria for DSM-5, but not for ICD-11, reported significantly higher levels of depression and general anxiety than children not meeting DSM-5 criteria. Conclusions : Findings support the parsimonious ICD-11 model of PTSD for trauma-exposed children, although adequate fit also was obtained for DSM-5. Use of only one model of PTSD, be it DSM-5 or ICD-11, will likely miss children with significant post-traumatic stress. DSM-5 may identify children with high levels of comorbid symptomatology, which may require additional clinical intervention.

  14. VT Lidar nDSM (2 meter) - 2012 - Bennington

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) This metadata applies to the following collection area(s): Bennington County 2012 2.0m and related "normalized" Digital Surface Model (nDSM)....

  15. VT Lidar DSM (1.6 meter) - 2008 - West Franklin

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) This metadata applies to the following collection area(s): Missisquoi Lower 2008 1.6m and related Digital Surface Model (DSM) data. This metadata...

  16. VT Lidar DSM (1.6 meter) - 2012 - Addison

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) This metadata applies to the following collection area(s): Addison County 2012 1.6m and related Digital Surface Model (DSM) data. This metadata...

  17. VT Lidar DSM (3.2 meter) - 2004 - Chittenden County

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) This metadata applies to the following collection area(s): Chittenden County 2004 3.2m and related Digital Surface Model (DSM) data. This metadata...

  18. Psychological Assessment with the DSM-5 Alternative Model for Personality Disorders: Tradition and Innovation

    Science.gov (United States)

    Waugh, Mark H.; Hopwood, Christopher J.; Krueger, Robert F.; Morey, Leslie C.; Pincus, Aaron L.; Wright, Aidan G. C.

    2016-01-01

    The Diagnostic and Statistical Manual of Mental Disorders Fifth Edition (DSM-5) Section III Alternative Model for Personality Disorders (AMPD; APA, 2013) represents an innovative system for simultaneous psychiatric classification and psychological assessment of personality disorders (PD). The AMPD combines major paradigms of personality assessment and provides an original, heuristic, flexible, and practical framework that enriches clinical thinking and practice. Origins, emerging research, and clinical application of the AMPD for diagnosis and psychological assessment are reviewed. The AMPD integrates assessment and research traditions, facilitates case conceptualization, is easy to learn and use, and assists in providing patient feedback. New as well as existing tests and psychometric methods may be used to operationalize the AMPD for clinical assessments. PMID:28450760

  19. Psychological Assessment with the DSM-5 Alternative Model for Personality Disorders: Tradition and Innovation.

    Science.gov (United States)

    Waugh, Mark H; Hopwood, Christopher J; Krueger, Robert F; Morey, Leslie C; Pincus, Aaron L; Wright, Aidan G C

    2017-04-01

    The Diagnostic and Statistical Manual of Mental Disorders Fifth Edition (DSM-5) Section III Alternative Model for Personality Disorders (AMPD; APA, 2013) represents an innovative system for simultaneous psychiatric classification and psychological assessment of personality disorders (PD). The AMPD combines major paradigms of personality assessment and provides an original, heuristic, flexible, and practical framework that enriches clinical thinking and practice. Origins, emerging research, and clinical application of the AMPD for diagnosis and psychological assessment are reviewed. The AMPD integrates assessment and research traditions, facilitates case conceptualization, is easy to learn and use, and assists in providing patient feedback. New as well as existing tests and psychometric methods may be used to operationalize the AMPD for clinical assessments.

  20. Predicting problematic alcohol use with the DSM-5 alternative model of personality pathology.

    Science.gov (United States)

    Creswell, Kasey G; Bachrach, Rachel L; Wright, Aidan G C; Pinto, Anthony; Ansell, Emily

    2016-01-01

    High comorbidity between personality disorders and alcohol use disorders appears related to individual differences in underlying personality dimensions of behavioral undercontrol and affective dysregulation. However, very little is known about how the Diagnostic and Statistical Manual of Mental Disorders (5th edition; DSM-5) Section III trait model of personality pathology relates to alcohol problems or how the strength of the relationship between personality pathology and alcohol problems changes with age and across gender. The current study examined these questions in a sample of 877 participants using the General Assessment of Personality Disorder to assess general personality dysfunction, the Personality Inventory for DSM-5 to measure specific traits, and the Alcohol Use Disorder Identification Test (AUDIT) to assess problematic alcohol use. Results demonstrated that general personality pathology (Criterion A) was significantly related to problematic alcohol use after controlling for age and gender effects. Furthermore, 2 of the 5 higher-order personality trait domains (Criterion B), Antagonism and Disinhibition, remained significant predictors of problematic alcohol use after accounting for the influence of general personality pathology; however, general personality pathology no longer predicted hazardous alcohol use once Antagonism and Disinhibition were added into the model. Finally, these 2 specific traits interacted with age, such that Antagonism was a stronger predictor of AUDIT scores among older individuals and Disinhibition was a stronger predictor of alcohol problems among younger individuals. Findings support the general validity of this new personality disorder diagnostic system and suggest important age effects in the relationship between traits and problematic alcohol use. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  1. DSM-5

    DEFF Research Database (Denmark)

    Arendt, Mikkel; Jónsson, Hjalti; Hougaard, Esben

    2013-01-01

    I maj måned i år udkom den længe ventede opdatering af diagnoselisten DSM-IV. Her følger en gennemgang af indholdet......I maj måned i år udkom den længe ventede opdatering af diagnoselisten DSM-IV. Her følger en gennemgang af indholdet...

  2. The Short Personality Inventory for DSM-5 and Its Conjoined Structure with the Common Five-Factor Model

    Science.gov (United States)

    Kajonius, Petri J.

    2017-01-01

    Research is currently testing how the new maladaptive personality inventory for DSM (PID-5) and the well-established common Five-Factor Model (FFM) together can serve as an empirical and theoretical foundation for clinical psychology. The present study investigated the official short version of the PID-5 together with a common short version of…

  3. The craving withdrawal model for alcoholism: Towards the DSM-V Improving the discriminant validity of alcohol use disorder diagnosis

    NARCIS (Netherlands)

    de Bruijn, Carla; van den Brink, Wim; de Graaf, Ron; Vollebergh, Wilma A. M.

    2005-01-01

    Aims: To compare the discriminant validity of the DSM-IV and the ICD-10 classification of alcohol use disorders (AUD) with an alternative classification, the craving withdrawal model (CWM). CWM requires craving and withdrawal for the diagnosis of alcohol dependence and raises the alcohol abuse

  4. APPLICATION OF DSM IN OBSTACLE CLEARANCE SURVEYING OF AERODROME

    Directory of Open Access Journals (Sweden)

    X. Qiao

    2016-06-01

    Full Text Available Compared to the wide use of digital elevation model (DEM, digital surface model (DSM receives less attention because that it is composed by not only terrain surface, but also vegetations and man-made objects which are usually regarded as useless information. Nevertheless, these objects are useful for the identification of obstacles around an aerodrome. The primary objective of the study was to determine the applicability of DSM in obstacle clearance surveying of aerodrome. According to the requirements of obstacle clearance surveying at QT airport, aerial and satellite imagery were used to generate DSM, by means of photogrammetry, which was spatially analyzed with the hypothetical 3D obstacle limitation surfaces (OLS to identify the potential obstacles. Field surveying was then carried out to retrieve the accurate horizontal position and height of the obstacles. The results proved that the application of DSM could make considerable improvement in the efficiency of obstacle clearance surveying of aerodrome.

  5. Integrating normal and pathological personality: relating the DSM-5 trait-dimensional model to general traits of personality.

    Science.gov (United States)

    Watson, David; Stasik, Sara M; Ro, Eunyoe; Clark, Lee Anna

    2013-06-01

    The Personality Inventory for DSM-5 (PID-5) assesses traits relevant for diagnosing personality disorder in the Diagnostic and Statistical Manual of Mental Disorders, fifth edition (DSM-5). We examined the PID-5 in relation to the Big-Three and Big-Five personality traits in outpatient and community adult samples. Domain-level analyses revealed that PID-5 Negative Affectivity correlated strongly with Neuroticism, and PID-5 Antagonism and Disinhibition correlated strongly negatively with Agreeableness and Conscientiousness, respectively; Antagonism and Disinhibition also were both linked strongly to Big-Three trait Disinhibition. PID-5 Detachment related strongly to personality, including Extraversion/Positive Temperament, but did not show its expected specificity to this factor. Finally, PID-5 Psychoticism correlated only modestly with Openness. Facet-level analyses indicated that some PID-5 scales demonstrated replicable deviations from their DSM-5 model placements. We discuss implications of these data for the DSM-5 model of personality disorder, and for integrating it with well-established structures of normal personality.

  6. Make room for DSM

    International Nuclear Information System (INIS)

    Meade, W.; Roseman, E.

    1992-01-01

    This article examines the potential effect of demand side management (DSM) on the economics of the independent power industry. The topics of the article include the contribution of DSM to future resource needs, integrated resource planning, DSM incentives, DSM bidding, measuring DSM success, DSM as a part of future utility planning, and strategic responses to DSM

  7. Elastic Model Transitions: a Hybrid Approach Utilizing Quadratic Inequality Constrained Least Squares (LSQI) and Direct Shape Mapping (DSM)

    Science.gov (United States)

    Jurenko, Robert J.; Bush, T. Jason; Ottander, John A.

    2014-01-01

    A method for transitioning linear time invariant (LTI) models in time varying simulation is proposed that utilizes both quadratically constrained least squares (LSQI) and Direct Shape Mapping (DSM) algorithms to determine physical displacements. This approach is applicable to the simulation of the elastic behavior of launch vehicles and other structures that utilize multiple LTI finite element model (FEM) derived mode sets that are propagated throughout time. The time invariant nature of the elastic data for discrete segments of the launch vehicle trajectory presents a problem of how to properly transition between models while preserving motion across the transition. In addition, energy may vary between flex models when using a truncated mode set. The LSQI-DSM algorithm can accommodate significant changes in energy between FEM models and carries elastic motion across FEM model transitions. Compared with previous approaches, the LSQI-DSM algorithm shows improvements ranging from a significant reduction to a complete removal of transients across FEM model transitions as well as maintaining elastic motion from the prior state.

  8. Exploring the Assessment of the DSM-5 Alternative Model for Personality Disorders With the Personality Assessment Inventory.

    Science.gov (United States)

    Busch, Alexander J; Morey, Leslie C; Hopwood, Christopher J

    2017-01-01

    Section III of the Diagnostic and Statistical Manual of Mental Disorders (5th ed. [DSM-5]; American Psychiatric Association, 2013) contains an alternative model for the diagnosis of personality disorder involving the assessment of 25 traits and a global level of overall personality functioning. There is hope that this model will be increasingly used in clinical and research settings, and the ability to apply established instruments to assess these concepts could facilitate this process. This study sought to develop scoring algorithms for these alternative model concepts using scales from the Personality Assessment Inventory (PAI). A multiple regression strategy used to predict scores in 2 undergraduate samples on DSM-5 alternative model instruments: the Personality Inventory for the DSM-5 (PID-5) and the General Personality Pathology scale (GPP; Morey et al., 2011 ). These regression functions resulted in scores that demonstrated promising convergent and discriminant validity across the alternative model concepts, as well as a factor structure in a cross-validation sample that was congruent with the putative structure of the alternative model traits. Results were linked to the PAI community normative data to provide normative information regarding these alternative model concepts that can be used to identify elevated traits and personality functioning level scores.

  9. Examining the DSM-5 alternative personality disorder model operationalization of antisocial personality disorder and psychopathy in a male correctional sample.

    Science.gov (United States)

    Wygant, Dustin B; Sellbom, Martin; Sleep, Chelsea E; Wall, Tina D; Applegate, Kathryn C; Krueger, Robert F; Patrick, Christopher J

    2016-07-01

    For decades, it has been known that the Diagnostic and Statistical Manual of Mental Disorders (DSM) diagnosis of Antisocial Personality Disorder (ASPD) is a nonadequate operationalization of psychopathy (Crego & Widiger, 2015). The DSM-5 alternative model of personality disorders provides an opportunity to rectify some of these long held concerns. The current study compared the Section III alternative model's trait-based conception of ASPD with the categorical model from the main diagnostic codes section of DSM-5 in terms of associations with differing models of psychopathy. We also evaluated the validity of the trait-based conception more broadly in relation to measures of antisocial tendencies as well as psychopathy. Participants were 200 male inmates who were administered a battery of self-report and interview-based researcher rating measures of relevant constructs. Analyses showed that Section III ASPD outperformed Section II ASPD in predicting scores on Hare's (2003) Psychopathy Checklist-Revised (PCL-R; r = .88 vs. .59). Additionally, aggregate scores for Section III ASPD performed well in capturing variance in differing ASPD and psychopathy measures. Finally, we found that the Section III ASPD impairment criteria added incrementally to the Section III ASPD traits in predicting PCL-R psychopathy and SCID-II ASPD. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  10. Improving a DSM Obtained by Unmanned Aerial Vehicles for Flood Modelling

    Science.gov (United States)

    Mourato, Sandra; Fernandez, Paulo; Pereira, Luísa; Moreira, Madalena

    2017-12-01

    According to the EU flood risks directive, flood hazard map must be used to assess the flood risk. These maps can be developed with hydraulic modelling tools using a Digital Surface Runoff Model (DSRM). During the last decade, important evolutions of the spatial data processing has been developed which will certainly improve the hydraulic models results. Currently, images acquired with Red/Green/Blue (RGB) camera transported by Unmanned Aerial Vehicles (UAV) are seen as a good alternative data sources to represent the terrain surface with a high level of resolution and precision. The question is if the digital surface model obtain with this data is adequate enough for a good representation of the hydraulics flood characteristics. For this purpose, the hydraulic model HEC-RAS was run with 4 different DSRM for an 8.5 km reach of the Lis River in Portugal. The computational performance of the 4 modelling implementations is evaluated. Two hydrometric stations water level records were used as boundary conditions of the hydraulic model. The records from a third hydrometric station were used to validate the optimal DSRM. The HEC-RAS results had the best performance during the validation step were the ones where the DSRM with integration of the two altimetry data sources.

  11. The impact of DSM-5's alternative model for personality disorders on criminal defendants.

    Science.gov (United States)

    Filone, Sarah; Strohmaier, Heidi; Murphy, Megan; DeMatteo, David

    2014-01-01

    The Diagnostic and Statistical Manual of Mental Disorders (DSM-5) workgroup on personality disorders initially proposed several revisions to diagnostic criteria and disorder labels, some of which could have had a direct impact on the perception and sentencing of criminal defendants. The recent publication of the DSM-5 included these revisions in an appendix for future research, indicating that the revised criteria require additional research before implementation. This study examined how the proposed changes, if implemented, might affect jury members' sentencing recommendations and perceptions of the defendant. Participants read vignettes in which diagnostic label (antisocial personality disorder vs. dyssocial personality disorder vs. psychopathy) and crime type (white collar vs. violent crime) were manipulated. Results suggest that participants perceived white collar offenders more negatively than violent offenders, and were generally more influenced by crime type than diagnosis. The diagnostic label was most influential on recidivism ratings and participants' perceptions of violent offenders. Copyright © 2013 John Wiley & Sons, Ltd.

  12. Hydrological land surface modelling

    DEFF Research Database (Denmark)

    Ridler, Marc-Etienne Francois

    and disaster management. The objective of this study is to develop and investigate methods to reduce hydrological model uncertainty by using supplementary data sources. The data is used either for model calibration or for model updating using data assimilation. Satellite estimates of soil moisture and surface......Recent advances in integrated hydrological and soil-vegetation-atmosphere transfer (SVAT) modelling have led to improved water resource management practices, greater crop production, and better flood forecasting systems. However, uncertainty is inherent in all numerical models ultimately leading...... hydrological and tested by assimilating synthetic hydraulic head observations in a catchment in Denmark. Assimilation led to a substantial reduction of model prediction error, and better model forecasts. Also, a new assimilation scheme is developed to downscale and bias-correct coarse satellite derived soil...

  13. Hydrological land surface modelling

    DEFF Research Database (Denmark)

    Ridler, Marc-Etienne Francois

    Recent advances in integrated hydrological and soil-vegetation-atmosphere transfer (SVAT) modelling have led to improved water resource management practices, greater crop production, and better flood forecasting systems. However, uncertainty is inherent in all numerical models ultimately leading...... and disaster management. The objective of this study is to develop and investigate methods to reduce hydrological model uncertainty by using supplementary data sources. The data is used either for model calibration or for model updating using data assimilation. Satellite estimates of soil moisture and surface...... hydrological and tested by assimilating synthetic hydraulic head observations in a catchment in Denmark. Assimilation led to a substantial reduction of model prediction error, and better model forecasts. Also, a new assimilation scheme is developed to downscale and bias-correct coarse satellite derived soil...

  14. Maladaptive Personality Trait Models: Validating the Five-Factor Model Maladaptive Trait Measures With the Personality Inventory for DSM-5 and NEO Personality Inventory.

    Science.gov (United States)

    Helle, Ashley C; Mullins-Sweatt, Stephanie N

    2017-05-01

    Eight measures have been developed to assess maladaptive variants of the five-factor model (FFM) facets specific to personality disorders (e.g., Five-Factor Borderline Inventory [FFBI]). These measures can be used in their entirety or as facet-based scales (e.g., FFBI Affective Dysregulation) to improve the comprehensiveness of assessment of pathological personality. There are a limited number of studies examining these scales with other measures of similar traits (e.g., DSM-5 alternative model). The current study examined the FFM maladaptive scales in relation to the respective general personality traits of the NEO Personality Inventory-Revised and the pathological personality traits of the DSM-5 alternative model using the Personality Inventory for DSM-5. The results indicated the FFM maladaptive trait scales predominantly converged with corresponding NEO Personality Inventory-Revised, and Personality Inventory for DSM-5 traits, providing further validity for these measures as extensions of general personality traits and evidence for their relation to the pathological trait model. Benefits and applications of the FFM maladaptive scales in clinical and research settings are discussed.

  15. VT Lidar DSM (1.6 meter) - 2010 - East Franklin/West Orleans

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) This metadata applies to the following collection area(s): Missisquoi Upper 2010 1.6m and related Digital Surface Model (DSM) data. This metadata...

  16. VT Lidar nDSM (1.6 meter) - 2008 - West Franklin

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) This metadata applies to the following collection area(s): Missisquoi Lower 2008 1.6m and related "normalized" Digital Surface Model (nDSM)....

  17. VT Lidar nDSM (1.6 meter) - 2010 - Missisquoi Upper

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) This metadata applies to the following collection area(s): Missisquoi Upper 2010 1.6m and related "normalized" Digital Surface Model (nDSM)....

  18. VT Data - Lidar nDSM (1m) 2005, Essex County

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) This metadata applies to the following collection area(s): Essex County 2005 1m and related "normalized" Digital Surface Model (nDSM) data. This...

  19. VT Lidar nDSM (1.6 meter) - 2012 - Addison County

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) This metadata applies to the following collection area(s): Addison County 2012 1.6m and related "normalized" Digital Surface Model (nDSM). Created...

  20. VT Lidar nDSM (3.2 meter) - 2004 - Chittenden County

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) This metadata applies to the following collection area(s): Chittenden County 2004 3.2m and related "normalized" Digital Surface Model (nDSM)....

  1. DSM-5 alternative personality disorder model traits as maladaptive extreme variants of the five-factor model: An item-response theory analysis.

    Science.gov (United States)

    Suzuki, Takakuni; Samuel, Douglas B; Pahlen, Shandell; Krueger, Robert F

    2015-05-01

    Over the past two decades, evidence has suggested that personality disorders (PDs) can be conceptualized as extreme, maladaptive variants of general personality dimensions, rather than discrete categorical entities. Recognizing this literature, the Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition (DSM-5) alternative PD model in Section III defines PDs partially through 25 maladaptive traits that fall within 5 domains. Empirical evidence based on the self-report measure of these traits, the Personality Inventory for DSM-5 (PID-5), suggests that these five higher-order domains share a structure and correlate in meaningful ways with the five-factor model (FFM) of general personality. In the current study, item response theory was used to compare the DSM-5 alternative PD model traits to those from a normative FFM inventory (the International Personality Item Pool-NEO [IPIP-NEO]) in terms of their measurement precision along the latent dimensions. Within a combined sample of 3,517 participants, results strongly supported the conclusion that the DSM-5 alternative PD model traits and IPIP-NEO traits are complimentary measures of 4 of the 5 FFM domains (with perhaps the exception of openness to experience vs. psychoticism). Importantly, the two measures yield largely overlapping information curves on these four domains. Differences that did emerge suggested that the PID-5 scales generally have higher thresholds and provide more information at the upper levels, whereas the IPIP-NEO generally had an advantage at the lower levels. These results support the general conceptualization that 4 domains of the DSM-5 alternative PD model traits are maladaptive, extreme versions of the FFM. (PsycINFO Database Record (c) 2015 APA, all rights reserved).

  2. Examining the Relations Among the DSM-5 Alternative Model of Personality, the Five-Factor Model, and Externalizing and Internalizing Behavior.

    Science.gov (United States)

    Sleep, Chelsea E; Hyatt, Courtland S; Lamkin, Joanna; Maples-Keller, Jessica L; Miller, Joshua D

    2017-01-26

    Given long-standing criticisms of the DSM's reliance on categorical models of psychopathology, including the poor reliability and validity of personality-disorder diagnoses, the American Psychiatric Association (APA) published an alternative model (AM) of personality disorders in Section III of the Diagnostic and Statistical Manual of Mental Disorders (DSM-5; APA, 2013), which, in part, comprises 5 pathological trait domains based on the 5-factor model (FFM). However, the empirical profiles and discriminant validity of the AM traits remain in question. We recruited a sample of undergraduates (N = 340) for the current study to compare the relations found between a measure of the DSM-5 AM traits (i.e., the Personality Inventory for DSM-5; PID-5; Krueger, Derringer, Markon, Watson, & Skodol, 2012) and a measure of the FFM (i.e., the International Personality Item Pool; IPIP; Goldberg, 1999) in relation to externalizing and internalizing symptoms. In general, the domains from the 2 measures were significantly related and demonstrated similar patterns of relations with these criteria, such that Antagonism/low Agreeableness and Disinhibition/low Conscientiousness were related to externalizing behaviors, whereas Negative Affectivity/Neuroticism was most significantly related to internalizing symptoms. However, the PID-5 demonstrated large interrelations among its domains and poorer discriminant validity than the IPIP. These results provide additional support that the conception of the trait model included in the DSM-5 AM is an extension of the FFM, but highlight some of the issues that arise due to the PID-5's more limited discriminant validity. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  3. Predictive Surface Complexation Modeling

    Energy Technology Data Exchange (ETDEWEB)

    Sverjensky, Dimitri A. [Johns Hopkins Univ., Baltimore, MD (United States). Dept. of Earth and Planetary Sciences

    2016-11-29

    Surface complexation plays an important role in the equilibria and kinetics of processes controlling the compositions of soilwaters and groundwaters, the fate of contaminants in groundwaters, and the subsurface storage of CO2 and nuclear waste. Over the last several decades, many dozens of individual experimental studies have addressed aspects of surface complexation that have contributed to an increased understanding of its role in natural systems. However, there has been no previous attempt to develop a model of surface complexation that can be used to link all the experimental studies in order to place them on a predictive basis. Overall, my research has successfully integrated the results of the work of many experimentalists published over several decades. For the first time in studies of the geochemistry of the mineral-water interface, a practical predictive capability for modeling has become available. The predictive correlations developed in my research now enable extrapolations of experimental studies to provide estimates of surface chemistry for systems not yet studied experimentally and for natural and anthropogenically perturbed systems.

  4. UPDATING LIDAR DSM USING HIGH RESOLUTION STEREO-BASED DSM FROM WORLDVIEW-2

    Directory of Open Access Journals (Sweden)

    H. Arefi

    2014-10-01

    Full Text Available In recent years, the acquisition and processing techniques of high resolution Digital Surface Models (DSM have been rapidly improved. Airborne LiDAR production as a well-known and high quality DSM is still unbeatable in elevation accuracy and highly produced dense point clouds. In this paper, the objective is to update an old but high quality DSM produced by LiDAR data using a DSM generated from high resolution stereo satellite images. A classification-base algorithm is proposed to extract building changes between DSMs in two epochs. For image classification procedure, the DSM and Worldview-2 orthorectified images have been used as input data for a fuzzy-based classification method. Then, extracted buildings are classified into unchanged, destroyed, new, and changed classes. In this study a dataset related to Munich city, has been utilized to test the experimental investigation. The implemented qualitative and quantitative assessments demonstrate high quality as well as high feasibility of the proposed approach.

  5. Building extraction for 3D city modelling using airborne laser ...

    African Journals Online (AJOL)

    First, the point cloud was classified into ground and non-ground xyz points. The ground points was used to generate digital terrain model (DTM) while digital surface model (DSM) was produced from the entire point cloud. From DSM and DTM, we obtained normalise DSM (nDSM) representing the height of features above ...

  6. From Asperger's Autistischen Psychopathen to DSM-5 Autism Spectrum Disorder and Beyond: A Subthreshold Autism Spectrum Model.

    Science.gov (United States)

    Dell'Osso, Liliana; Luche, Riccardo Dalle; Gesi, Camilla; Moroni, Ilenia; Carmassi, Claudia; Maj, Mario

    2016-01-01

    Growing interest has recently been devoted to partial forms of autism, lying at the diagnostic boundaries of those conditions previously diagnosed as Asperger's Disorder. This latter includes an important retrieval of the European classical psychopathological concepts of adult autism to which Hans Asperger referred in his work. Based on the review of Asperger's Autistische Psychopathie , from first descriptions through the DSM-IV Asperger's Disorder and up to the recent DSM-5 Autism Spectrum Disorder, the paper aims to propose a Subthreshold Autism Spectrum Model that encompasses not only threshold-level manifestations but also mild/atypical symptoms, gender-specific features, behavioral manifestations and personality traits associated with Autism Spectrum Disorder. This model includes, but is not limited to, the so-called broad autism phenotype spanning across the general population that does not fully meet Autism Spectrum Disorder criteria. From this perspective, we propose a subthreshold autism as a unique psychological/behavioral model for research that could help to understand the neurodevelopmental trajectories leading from autistic traits to a broad range of mental disorders.

  7. From Asperger's Autistischen Psychopathen to DSM-5 Autism Spectrum Disorder and Beyond: A Subthreshold Autism Spectrum Model

    Science.gov (United States)

    Dell’Osso, Liliana; Luche, Riccardo Dalle; Gesi, Camilla; Moroni, Ilenia; Carmassi, Claudia; Maj, Mario

    2016-01-01

    Growing interest has recently been devoted to partial forms of autism, lying at the diagnostic boundaries of those conditions previously diagnosed as Asperger’s Disorder. This latter includes an important retrieval of the European classical psychopathological concepts of adult autism to which Hans Asperger referred in his work. Based on the review of Asperger's Autistische Psychopathie, from first descriptions through the DSM-IV Asperger’s Disorder and up to the recent DSM-5 Autism Spectrum Disorder, the paper aims to propose a Subthreshold Autism Spectrum Model that encompasses not only threshold-level manifestations but also mild/atypical symptoms, gender-specific features, behavioral manifestations and personality traits associated with Autism Spectrum Disorder. This model includes, but is not limited to, the so-called broad autism phenotype spanning across the general population that does not fully meet Autism Spectrum Disorder criteria. From this perspective, we propose a subthreshold autism as a unique psychological/behavioral model for research that could help to understand the neurodevelopmental trajectories leading from autistic traits to a broad range of mental disorders. PMID:27867417

  8. The latent structure of personality functioning: Investigating criterion a from the alternative model for personality disorders in DSM-5.

    Science.gov (United States)

    Zimmermann, Johannes; Böhnke, Jan R; Eschstruth, Rhea; Mathews, Alessa; Wenzel, Kristin; Leising, Daniel

    2015-08-01

    The alternative model for the classification of personality disorders (PD) in the Diagnostic and Statistical Manual of Mental Disorders (5th ed.; DSM-5) Section III comprises 2 major components: impairments in personality functioning (Criterion A) and maladaptive personality traits (Criterion B). In this study, we investigated the latent structure of Criterion A (a) within subdomains, (b) across subdomains, and (c) in conjunction with the Criterion B trait facets. Data were gathered as part of an online study that collected other-ratings by 515 laypersons and 145 therapists. Laypersons were asked to assess 1 of their personal acquaintances, whereas therapists were asked to assess 1 of their patients, using 135 items that captured features of Criteria A and B. We were able to show that (a) the structure within the Criterion A subdomains can be appropriately modeled using generalized graded unfolding models, with results suggesting that the items are indeed related to common underlying constructs but often deviate from their theoretically expected severity level; (b) the structure across subdomains is broadly in line with a model comprising 2 strongly correlated factors of self- and interpersonal functioning, with some notable deviations from the theoretical model; and (c) the joint structure of the Criterion A subdomains and the Criterion B facets broadly resembles the expected model of 2 plus 5 factors, albeit the loading pattern suggests that the distinction between Criteria A and B is somewhat blurry. Our findings provide support for several major assumptions of the alternative DSM-5 model for PD but also highlight aspects of the model that need to be further refined. (c) 2015 APA, all rights reserved).

  9. The structure of personality disorders: comparing the DSM-IV-TR Axis II classification with the five-factor model framework using structural equation modeling.

    Science.gov (United States)

    Bastiaansen, Leen; Rossi, Gina; Schotte, Christiaan; De Fruyt, Filip

    2011-06-01

    Earlier factor analytical studies on the empirical validity of the DSM-IV-TR (American Psychological Association, 2000) Axis II classification have offered little support for the current three-cluster structure. In his large-scale meta-analysis of previously published personality disorder correlation matrices, O'Connor (2005) found four factors, corresponding to the neuroticism, extraversion, agreeableness, and conscientiousness domains of the five-factor model of personality. In the present study, this dimensional four-factor model and the categorical DSM three-cluster structure were fitted to the Assessment of DSM-IV Personality Disorders questionnaire (ADP-IV; Schotte & De Doncker, 1994) scale scores using structural equation modelling. The results strongly favored the dimensional model, which also resembled other well-founded four-factor proposals (Livesley, Jang, & Vernon, 1998; Widiger & Simonsen, 2005). Moreover, a multigroup confirmatory factor analysis showed that this model was highly invariant and thus generalizable across two large clinical (n = 1,029) and general population (n = 659) samples.

  10. Model of acetic acid-affected growth and poly(3-hydroxybutyrate) production by Cupriavidus necator DSM 545.

    Science.gov (United States)

    Marudkla, Jaruwan; Lee, Wen-Chien; Wannawilai, Siwaporn; Chisti, Yusuf; Sirisansaneeyakul, Sarote

    2018-02-20

    Acetic acid, a potential growth inhibitor, commonly occurs in lignocellulosic hydrolysates. The growth of Cupriavidus necator DSM 545 and production of poly(3-hydroxybutyrate) (PHB) by this bacterium in a glucose-based medium supplemented with various initial concentrations of acetic acid are reported. The bacterium could use both glucose and acetic acid to grow and produce PHB, but acetic acid inhibited growth once its initial concentration exceeded 0.5 g/L. As acetic acid is an unavoidable contaminant in hydrolysates used as sugar sources in commercial fermentations, a mathematical model was developed to describe its impact on growth and the production of PHB. The model was shown to satisfactorily apply to growth and PHB production data obtained in media made with acetic-acid-containing hydrolysates of Napier grass and oil palm trunk as carbon substrates. Copyright © 2018 Elsevier B.V. All rights reserved.

  11. LINE-BASED REGISTRATION OF DSM AND HYPERSPECTRAL IMAGES

    Directory of Open Access Journals (Sweden)

    J. Avbelj

    2013-04-01

    Full Text Available Data fusion techniques require a good registration of all the used datasets. In remote sensing, images are usually geo-referenced using the GPS and IMU data. However, if more precise registration is required, image processing techniques can be employed. We propose a method for multi-modal image coregistration between hyperspectral images (HSI and digital surface models (DSM. The method is divided in three parts: object and line detection of the same object in HSI and DSM, line matching and determination of transformation parameters. Homogeneous coordinates are used to implement matching and adjustment of transformation parameters. The common object in HSI and DSM are building boundaries. They have apparent change in height and material, that can be detected in DSM and HSI, respectively. Thus, before the matching and transformation parameter computation, building outlines are detected and adjusted in HSI and DSM. We test the method on a HSI and two DSM, using extracted building outbounds and for comparison also extracted lines with a line detector. The results show that estimated building boundaries provide more line assignments, than using line detector.

  12. Comparing Diagnostic Outcomes of Autism Spectrum Disorder Using "DSM-IV-TR" and "DSM-5" Criteria

    Science.gov (United States)

    Harstad, Elizabeth B.; Fogler, Jason; Sideridis, Georgios; Weas, Sarah; Mauras, Carrie; Barbaresi, William J.

    2015-01-01

    Controversy exists regarding the "DSM-5" criteria for ASD. This study tested the psychometric properties of the "DSM-5" model and determined how well it performed across different gender, IQ, and "DSM-IV-TR" sub-type, using clinically collected data on 227 subjects (median age = 3.95 years, majority had IQ > 70).…

  13. Clinical utility of the DSM-5 alternative model for borderline personality disorder: Differential diagnostic accuracy of the BFI, SCID-II-PQ, and PID-5.

    Science.gov (United States)

    Fowler, J Christopher; Madan, Alok; Allen, Jon G; Patriquin, Michelle; Sharp, Carla; Oldham, John M; Frueh, B Christopher

    2018-01-01

    With the publication of DSM 5 alternative model for personality disorders it is critical to assess the components of the model against evidence-based models such as the five factor model and the DSM-IV-TR categorical model. This study explored the relative clinical utility of these models in screening for borderline personality disorder (BPD). Receiver operator characteristics and diagnostic efficiency statistics were calculated for three personality measures to ascertain the relative diagnostic efficiency of each measure. A total of 1653 adult inpatients at a specialist psychiatric hospital completed SCID-II interviews. Sample 1 (n=653) completed the SCID-II interviews, SCID-II Questionnaire (SCID-II-PQ) and the Big Five Inventory (BFI), while Sample 2 (n=1,000) completed the SCID-II interviews, Personality Inventory for DSM5 (PID-5) and the BFI. BFI measure evidenced moderate accuracy for two composites: High Neuroticism+ low agreeableness composite (AUC=0.72, SE=0.01, pPID-5 BPD algorithm (consisting of elevated emotional lability, anxiousness, separation insecurity, hostility, depressivity, impulsivity, and risk taking) evidenced moderate-to-excellent accuracy (AUC=0.87, SE=0.01, pPID-5 BPD algorithm for screening purposes. Furthermore, findings support the accuracy of the DSM 5 alternative model Criteria B trait constellation for diagnosing BPD. Limitations of the study include the single inpatient setting and use of two discrete samples to assess PID-5 and SCID-II-PQ. Copyright © 2017 Elsevier Inc. All rights reserved.

  14. ACCURACY COMPARISON OF DIGITAL SURFACE MODELS CREATED BY UNMANNED AERIAL SYSTEMS IMAGERY AND TERRESTRIAL LASER SCANNER

    Directory of Open Access Journals (Sweden)

    M. Naumann

    2013-08-01

    Full Text Available The main focus of the paper is a comparative study in which we have investigated, whether automatically generated digital surface models (DSM obtained from unmanned aerial systems (UAS imagery are comparable with DSM obtained from terrestrial laser scanning (TLS. The research is conducted at a pilot dike for coastal engineering. The effort and the achievable accuracy of both DSMs are compared. The error budgets of these two methods are investigated and the models obtained in each case compared against each other.

  15. Modeling conoid surfaces

    OpenAIRE

    Velimirović Ljubica S.; Stanković Mića S.; Radivojević Grozdana

    2002-01-01

    In tins paper we consider conoid surfaces as frequently used surfaces in building techniques, mainly as daring roof structures. Different types of conoids are presented using the programme package Mathematica. We describe the generation of conoids and by means of parametric representation we get their graphics. The geometric approach offers a wide range of possibilities in the research of complicated spatial surface systems.

  16. Complete genome sequence of Corynebacterium variabile DSM 44702 isolated from the surface of smear-ripened cheeses and insights into cheese ripening and flavor generation

    Directory of Open Access Journals (Sweden)

    Trost Eva

    2011-11-01

    Full Text Available Abstract Background Corynebacterium variabile is part of the complex microflora on the surface of smear-ripened cheeses and contributes to the development of flavor and textural properties during cheese ripening. Still little is known about the metabolic processes and microbial interactions during the production of smear-ripened cheeses. Therefore, the gene repertoire contributing to the lifestyle of the cheese isolate C. variabile DSM 44702 was deduced from the complete genome sequence to get a better understanding of this industrial process. Results The chromosome of C. variabile DSM 44702 is composed of 3, 433, 007 bp and contains 3, 071 protein-coding regions. A comparative analysis of this gene repertoire with that of other corynebacteria detected 1, 534 predicted genes to be specific for the cheese isolate. These genes might contribute to distinct metabolic capabilities of C. variabile, as several of them are associated with metabolic functions in cheese habitats by playing roles in the utilization of alternative carbon and sulphur sources, in amino acid metabolism, and fatty acid degradation. Relevant C. variabile genes confer the capability to catabolize gluconate, lactate, propionate, taurine, and gamma-aminobutyric acid and to utilize external caseins. In addition, C. variabile is equipped with several siderophore biosynthesis gene clusters for iron acquisition and an exceptional repertoire of AraC-regulated iron uptake systems. Moreover, C. variabile can produce acetoin, butanediol, and methanethiol, which are important flavor compounds in smear-ripened cheeses. Conclusions The genome sequence of C. variabile provides detailed insights into the distinct metabolic features of this bacterium, implying a strong adaption to the iron-depleted cheese surface habitat. By combining in silico data obtained from the genome annotation with previous experimental knowledge, occasional observations on genes that are involved in the complex

  17. Testing the cognitive-behavioural maintenance models across DSM-5 bulimic-type eating disorder diagnostic groups: a multi-centre study.

    Science.gov (United States)

    Dakanalis, Antonios; Carrà, Giuseppe; Calogero, Rachel; Zanetti, Maria Assunta; Gaudio, Santino; Caccialanza, Riccardo; Riva, Giuseppe; Clerici, Massimo

    2015-12-01

    The original cognitive-behavioural (CB) model of bulimia nervosa, which provided the basis for the widely used CB therapy, proposed that specific dysfunctional cognitions and behaviours maintain the disorder. However, amongst treatment completers, only 40-50 % have a full and lasting response. The enhanced CB model (CB-E), upon which the enhanced version of the CB treatment was based, extended the original approach by including four additional maintenance factors. This study evaluated and compared both CB models in a large clinical treatment seeking sample (N = 679), applying both DSM-IV and DSM-5 criteria for bulimic-type eating disorders. Application of the DSM-5 criteria reduced the number of cases of DSM-IV bulimic-type eating disorders not otherwise specified to 29.6 %. Structural equation modelling analysis indicated that (a) although both models provided a good fit to the data, the CB-E model accounted for a greater proportion of variance in eating-disordered behaviours than the original one, (b) interpersonal problems, clinical perfectionism and low self-esteem were indirectly associated with dietary restraint through over-evaluation of shape and weight, (c) interpersonal problems and mood intolerance were directly linked to binge eating, whereas restraint only indirectly affected binge eating through mood intolerance, suggesting that factors other than restraint may play a more critical role in the maintenance of binge eating. In terms of strength of the associations, differences across DSM-5 bulimic-type eating disorder diagnostic groups were not observed. The results are discussed with reference to theory and research, including neurobiological findings and recent hypotheses.

  18. Modelling land surface - atmosphere interactions

    DEFF Research Database (Denmark)

    Rasmussen, Søren Højmark

    related to inaccurate land surface modelling, e.g. enhanced warm bias in warm dry summer months. Coupling the regional climate model to a hydrological model shows the potential of improving the surface flux simulations in dry periods and the 2 m air temperature in general. In the dry periods......The study is investigates modelling of land surface – atmosphere interactions in context of fully coupled climatehydrological model. With a special focus of under what condition a fully coupled model system is needed. Regional climate model inter-comparison projects as ENSEMBLES have shown bias...

  19. DSM-5 field survey

    DEFF Research Database (Denmark)

    Lochner, Christine; Grant, Jon E; Odlaug, Brian Lawrence

    2012-01-01

    The aim of this multisite field survey was to examine the DSM-IV-TR criteria, proposed DSM-5 diagnostic criteria, as well as a number of possible additional diagnostic criteria, in patients with hair-pulling disorder (HPD, or trichotillomania).......The aim of this multisite field survey was to examine the DSM-IV-TR criteria, proposed DSM-5 diagnostic criteria, as well as a number of possible additional diagnostic criteria, in patients with hair-pulling disorder (HPD, or trichotillomania)....

  20. [DSM-5: neurodevelopmental disorders

    NARCIS (Netherlands)

    Zinkstok, J.; Buitelaar, J.K.

    2014-01-01

    BACKGROUND: The 5th edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM) was published in May, 2013. AIM: To review the changes in the diagnostic criteria for autism spectrum disorder (ASD) and ADHD in DSM-5, compared to DSM-IV. METHOD: The diagnostic criteria for ASD and ADHD

  1. Alternative model of random surfaces

    International Nuclear Information System (INIS)

    Ambartzumian, R.V.; Sukiasian, G.S.; Savvidy, G.K.; Savvidy, K.G.

    1992-01-01

    We analyse models of triangulated random surfaces and demand that geometrically nearby configurations of these surfaces must have close actions. The inclusion of this principle drives us to suggest a new action, which is a modified Steiner functional. General arguments, based on the Minkowski inequality, shows that the maximal distribution to the partition function comes from surfaces close to the sphere. (orig.)

  2. 3D building reconstruction based on given ground plan information and surface models extracted from spaceborne imagery

    Science.gov (United States)

    Tack, Frederik; Buyuksalih, Gurcan; Goossens, Rudi

    2012-01-01

    3D surface models have gained field as an important tool for urban planning and mapping. However, urban environments have a complex nature to model and they provide a challenge to investigate the current limits of automatic digital surface modeling from high resolution satellite imagery. An approach is introduced to improve a 3D surface model, extracted photogrammetrically from satellite imagery, based on the geometric building information embodied in existing 2D ground plans. First buildings are clipped from the extracted DSM based on the 2D polygonal building ground plans. To generate prismatic shaped structures with vertical walls and flat roofs, building shape is retrieved from the cadastre database while elevation information is extracted from the DSM. Within each 2D building boundary, a constant roof height is extracted based on statistical calculations of the height values. After buildings are extracted from the initial surface model, the remaining DSM is further processed to simplify to a smooth DTM that reflects bare ground, without artifacts, local relief, vegetation, cars and city furniture. In a next phase, both models are merged to yield an integrated city model or generalized DSM. The accuracy of the generalized surface model is assessed according to a quantitative-statistical analysis by comparison with two different types of reference data.

  3. MERGING DIGITAL SURFACE MODELS IMPLEMENTING BAYESIAN APPROACHES

    Directory of Open Access Journals (Sweden)

    H. Sadeq

    2016-06-01

    Full Text Available In this research different DSMs from different sources have been merged. The merging is based on a probabilistic model using a Bayesian Approach. The implemented data have been sourced from very high resolution satellite imagery sensors (e.g. WorldView-1 and Pleiades. It is deemed preferable to use a Bayesian Approach when the data obtained from the sensors are limited and it is difficult to obtain many measurements or it would be very costly, thus the problem of the lack of data can be solved by introducing a priori estimations of data. To infer the prior data, it is assumed that the roofs of the buildings are specified as smooth, and for that purpose local entropy has been implemented. In addition to the a priori estimations, GNSS RTK measurements have been collected in the field which are used as check points to assess the quality of the DSMs and to validate the merging result. The model has been applied in the West-End of Glasgow containing different kinds of buildings, such as flat roofed and hipped roofed buildings. Both quantitative and qualitative methods have been employed to validate the merged DSM. The validation results have shown that the model was successfully able to improve the quality of the DSMs and improving some characteristics such as the roof surfaces, which consequently led to better representations. In addition to that, the developed model has been compared with the well established Maximum Likelihood model and showed similar quantitative statistical results and better qualitative results. Although the proposed model has been applied on DSMs that were derived from satellite imagery, it can be applied to any other sourced DSMs.

  4. Legion Sementation for Building Extraction from LIDAR Based Dsm Data

    Science.gov (United States)

    Liu, C.; Shi, B.; Yang, X.; Li, N.

    2012-07-01

    Recently, a neural oscillator network based on biologically framework named LEGION (Locally Excitatory Globally Inhibitory Oscillator Network), which each oscillator has excitatory lateral connections to the oscillators in its local neighbourhood as well as a connection with a global inhibitor, has been applied to segmentation field. The extended LEGION approach is constructed to extract buildings digital surface model (DSM) generated from LiDAR data. This approach is with no assumption about the underlying structures in DSM data and no prior knowledge regarding the number of regions. Instead of using lateral potential to find a major oscillator block in original way, Gray Level Co-occurence Matrix (GLCM) homogeneity measuring DSM height texture is applied to distinguish buildings from trees and assist to find LEGION leaders in building targets. Alongside the DSM height texture attribure, extended LEGION can extract buildings close to trees automatically. Then a solution of least squares with perpendicularity constraints is put forward to determine regularized rectilinear building boundaries, after tracing and connection the rough building boundaries. In general, the paper presents the concept, algorithms and procedures of the approach. It also gives experimental result of Vaihingen A2 region by the ISPRS text project and another result based on a DSM data of suburban area. The experiment result showed that the proposed method can effectively produce more accurate buildings boundary extraction.

  5. LEGION SEMENTATION FOR BUILDING EXTRACTION FROM LIDAR BASED DSM DATA

    Directory of Open Access Journals (Sweden)

    C. Liu

    2012-07-01

    Full Text Available Recently, a neural oscillator network based on biologically framework named LEGION (Locally Excitatory Globally Inhibitory Oscillator Network, which each oscillator has excitatory lateral connections to the oscillators in its local neighbourhood as well as a connection with a global inhibitor, has been applied to segmentation field. The extended LEGION approach is constructed to extract buildings digital surface model (DSM generated from LiDAR data. This approach is with no assumption about the underlying structures in DSM data and no prior knowledge regarding the number of regions. Instead of using lateral potential to find a major oscillator block in original way, Gray Level Co-occurence Matrix (GLCM homogeneity measuring DSM height texture is applied to distinguish buildings from trees and assist to find LEGION leaders in building targets. Alongside the DSM height texture attribure, extended LEGION can extract buildings close to trees automatically. Then a solution of least squares with perpendicularity constraints is put forward to determine regularized rectilinear building boundaries, after tracing and connection the rough building boundaries. In general, the paper presents the concept, algorithms and procedures of the approach. It also gives experimental result of Vaihingen A2 region by the ISPRS text project and another result based on a DSM data of suburban area. The experiment result showed that the proposed method can effectively produce more accurate buildings boundary extraction.

  6. A Meta-Analytic Review of the Relationships Between the Five-Factor Model and DSM-IV-TR Personality Disorders: A Facet Level Analysis

    OpenAIRE

    Samuel, Douglas B.; Widiger, Thomas A.

    2008-01-01

    Theory and research have suggested that the personality disorders contained within the American Psychiatric Association's Diagnostic and Statistical Manual of Mental Disorders (DSM-IV-TR) can be understood as maladaptive variants of the personality traits included within the five-factor model (FFM). The current meta-analysis of FFM personality disorder research both replicated and extended the 2004 work of Saulsman and Page (The five-factor model and personality disorder empirical literature:...

  7. Modelling land surface - atmosphere interactions

    DEFF Research Database (Denmark)

    Rasmussen, Søren Højmark

    The study is investigates modelling of land surface – atmosphere interactions in context of fully coupled climatehydrological model. With a special focus of under what condition a fully coupled model system is needed. Regional climate model inter-comparison projects as ENSEMBLES have shown bias...

  8. Model checking a cache coherence protocol for a Java DSM implementation

    NARCIS (Netherlands)

    J. Pang; W.J. Fokkink (Wan); R. Hofman (Rutger); R. Veldema

    2007-01-01

    textabstractJackal is a fine-grained distributed shared memory implementation of the Java programming language. It aims to implement Java's memory model and allows multithreaded Java programs to run unmodified on a distributed memory system. It employs a multiple-writer cache coherence

  9. Model checking a cache coherence protocol of a Java DSM implementation

    NARCIS (Netherlands)

    Pang, J.; Fokkink, W.J.; Hofman, R.; Veldema, R.S.

    2007-01-01

    Jackal is a fine-grained distributed shared memory implementation of the Java programming language. It aims to implement Java's memory model and allows multithreaded Java programs to run unmodified on a distributed memory system. It employs a multiple-writer cache coherence protocol. In this paper,

  10. PTSD's Underlying Dimensions in Typhoon Haiyan Survivors: Assessing DSM-5 Symptomatology-Based PTSD Models and Their Relation to Posttraumatic Cognition.

    Science.gov (United States)

    Mordeno, Imelu G; Carpio, Jennifer Gay E; Nalipay, Ma Jenina N; Saavedra, Rhea Lina J

    2017-03-01

    The recent changes in posttraumatic stress disorder (PTSD) symptomatology in the fifth edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM-5) call for a re-examination of PTSD's latent factor structure. The present study assessed six competing models of PTSD based on DSM-5 symptomatology using confirmatory factor analysis in a sample of young adult Filipino survivors of typhoon Haiyan, one of the strongest typhoons in the world ever recorded at the time of its landfall (N = 632). Furthermore, the differential relationships of the factors of the best-fitting model with posttraumatic cognitions were also investigated. Results showed the 7-factor hybrid model of PTSD comprised of intrusion, avoidance, negative affect, anhedonia, externalizing behaviors, anxious arousal, and dysphoric arousal, to be the best fitting model. In addition, the varying degrees of relationship with posttraumatic cognitions support the distinctiveness of each factor. These findings are pertinent in light of the changes in DSM-5 PTSD symptomatology, as well as in understanding the underlying dimensions of PTSD among Asian, particularly Filipino, survivors of a natural disaster.

  11. A Hierarchical Building Segmentation in Digital Surface Models for 3D Reconstruction

    Directory of Open Access Journals (Sweden)

    Yiming Yan

    2017-01-01

    Full Text Available In this study, a hierarchical method for segmenting buildings in a digital surface model (DSM, which is used in a novel framework for 3D reconstruction, is proposed. Most 3D reconstructions of buildings are model-based. However, the limitations of these methods are overreliance on completeness of the offline-constructed models of buildings, and the completeness is not easily guaranteed since in modern cities buildings can be of a variety of types. Therefore, a model-free framework using high precision DSM and texture-images buildings was introduced. There are two key problems with this framework. The first one is how to accurately extract the buildings from the DSM. Most segmentation methods are limited by either the terrain factors or the difficult choice of parameter-settings. A level-set method are employed to roughly find the building regions in the DSM, and then a recently proposed ‘occlusions of random textures model’ are used to enhance the local segmentation of the buildings. The second problem is how to generate the facades of buildings. Synergizing with the corresponding texture-images, we propose a roof-contour guided interpolation of building facades. The 3D reconstruction results achieved by airborne-like images and satellites are compared. Experiments show that the segmentation method has good performance, and 3D reconstruction is easily performed by our framework, and better visualization results can be obtained by airborne-like images, which can be further replaced by UAV images.

  12. Validating a two-dimensional bipolar spectrum model integrating DSM-5's mixed features specifier for Major Depressive Disorder.

    Science.gov (United States)

    Ferentinos, Panagiotis; Fountoulakis, Konstantinos N; Lewis, Cathryn M; Porichi, Evgenia; Dikeos, Dimitris; Papageorgiou, Charalambos; Douzenis, Athanassios

    2017-08-01

    The literature on DSM-5's 'Major Depressive Disorder with lifetime mixed features' (MDD-MF) is limited. This study investigated MDD-MF's potential inclusion into a bipolar spectrum. We recruited 287 patients with Bipolar I disorder (BD-I), BD-II, MDD-MF or 'MDD without lifetime mixed features' (MDD-noMF); most (N=280) were stabilized for at least one year on medication. Sixteen validators (clinical features, psychiatric family history, temperament, stabilizing treatment) were compared across groups and subjected to trend analyses. Two discriminant function analyses (DFA; primary and secondary), excluding or including, respectively, treatment-related predictors, explored latent dimensions maximizing between-group discrimination; mahalanobis distances between group 'centroids' were calculated. Eleven validators differed significantly across groups; nine varied monotonically along a bipolar diathesis gradient with significant linear trends; two peaked at MDD-MF and displayed significant quadratic trends. In the primary DFA, apart from a classic bipolarity dimension, correlating with hospitalizations, early age at onset, lifetime psychosis and lower anxious temperament scores, on which groups ranked along a bipolar propensity gradient, a second dimension was also significant, peaking at BD-II and MDD-MF (challenging the classic bipolar ranking), which correlated with lifetime psychiatric comorbidities, suicidality, lower lifetime psychosis rates, female gender, higher cyclothymic and lower depressive temperament scores; MDD-MF was equipoised amidst BD-II and MDD-noMF. After including treatment-related predictors (secondary DFA), discrimination improved overall but BD-II and MDD-MF were closest than any other pair, suggesting similar treatment patterns for these two groups at this naturalistic setting. To our knowledge, this is the first time a two-dimensional bipolar spectrum based on classic external validators is proposed, fitting the data better than a

  13. The centrality of DSM and non-DSM depressive symptoms in Han Chinese women with major depression.

    Science.gov (United States)

    Kendler, Kenneth S; Aggen, Steven H; Flint, Jonathan; Borsboom, Denny; Fried, Eiko I

    2018-02-01

    We compared DSM-IV criteria for major depression (MD) with clinically selected non-DSM criteria in their ability to represent clinical features of depression. We conducted network analyses of 19 DSM and non-DSM symptoms of MD assessed at personal interview in 5952 Han Chinese women meeting DSM-IV criteria for recurrent MD. We estimated an Ising model (the state-of-the-art network model for binary data), compared the centrality (interconnectedness) of DSM-IV and non-DSM symptoms, and investigated the community structure (symptoms strongly clustered together). The DSM and non-DSM criteria were intermingled within the same symptom network. In both the DSM-IV and non-DSM criteria sets, some symptoms were central (highly interconnected) while others were more peripheral. The mean centrality of the DSM and non-DSM criteria sets did not significantly differ. In at least two cases, non-DSM criteria were more central than symptomatically related DSM criteria: lowered libido vs. sleep and appetite changes, and hopelessness versus worthlessness. The overall network had three sub-clusters reflecting neurovegetative/mood symptoms, cognitive changes and anxiety/irritability. The sample were severely ill Han Chinese females limiting generalizability. Consistent with prior historical reviews, our results suggest that the DSM-IV criteria for MD reflect one possible sub-set of a larger pool of plausible depressive symptoms and signs. While the DSM criteria on average perform well, they are not unique and may not be optimal in their ability to describe the depressive syndrome. Copyright © 2017. Published by Elsevier B.V.

  14. DSM-5 en cultuur

    NARCIS (Netherlands)

    de Jong, J.T.V.M.

    2012-01-01

    Achtergrond: Binnen de geestelijke gezondheidszorg is het diagnostische classificatie-systeem van de Diagnostic and Statistical Manual of Mental Disorders (vierde editie, dsm-iv) toonaangevend. Waarschijnlijk komt in 2013 de volgende versie, de dsm-5, uit. In de nieuwe versie probeert men rekening

  15. Crisis DSM Generation To Support Refugee Camp Management

    Science.gov (United States)

    Gstaiger, Veronika; d'Angelo, Pablo; Schneiderhan, Tobais; Krauss, Thomas

    2013-12-01

    The extraction of high resolution surface information from satellite data has become an important area of research. One of the numerous fields of application is disaster management. Detailed information about the affected terrain is not only needed for analyses during the emergency relief phase, but also for reconstruction and prevention activities. In this paper the authors present the generation of a Digital Surface Model (DSM) based on three very high resolution optical satellite images. The DSM was produced to supplement a flood mapping activity in Jordan and serves as example for the implementation of scientific results during an emergency request. The flood affected the Zaatari refugee camp in Jordan and was mapped by the Center for Satellite Based Crisis Information (ZKI) at the German Aerospace Center (DLR) in January 2013 under emergency mapping conditions.

  16. Accuracy Assessment of Digital Surface Models Based on WorldView-2 and ADS80 Stereo Remote Sensing Data

    Directory of Open Access Journals (Sweden)

    Christian Ginzler

    2012-05-01

    Full Text Available Digital surface models (DSMs are widely used in forest science to model the forest canopy. Stereo pairs of very high resolution satellite and digital aerial images are relatively new and their absolute accuracy for DSM generation is largely unknown. For an assessment of these input data two DSMs based on a WorldView-2 stereo pair and a ADS80 DSM were generated with photogrammetric instruments. Rational polynomial coefficients (RPCs are defining the orientation of the WorldView-2 satellite images, which can be enhanced with ground control points (GCPs. Thus two WorldView-2 DSMs were distinguished: a WorldView-2 RPCs-only DSM and a WorldView-2 GCP-enhanced RPCs DSM. The accuracy of the three DSMs was estimated with GPS measurements, manual stereo-measurements, and airborne laser scanning data (ALS. With GCP-enhanced RPCs the WorldView-2 image orientation could be optimised to a root mean square error (RMSE of 0.56 m in planimetry and 0.32 m in height. This improvement in orientation allowed for a vertical median error of −0.24 m for the WorldView-2 GCP-enhanced RPCs DSM in flat terrain. Overall, the DSM based on ADS80 images showed the highest accuracy of the three models with a median error of 0.08 m over bare ground. As the accuracy of a DSM varies with land cover three classes were distinguished: herb and grass, forests, and artificial areas. The study suggested the ADS80 DSM to best model actual surface height in all three land cover classes, with median errors < 1.1 m. The WorldView-2 GCP-enhanced RPCs model achieved good accuracy, too, with median errors of −0.43 m for the herb and grass vegetation and −0.26 m for artificial areas. Forested areas emerged as the most difficult land cover type for height modelling; still, with median errors of −1.85 m for the WorldView-2 GCP-enhanced RPCs model and −1.12 m for the ADS80 model, the input data sets evaluated here are quite promising for forest canopy modelling.

  17. Surface EXAFS - A mathematical model

    International Nuclear Information System (INIS)

    Bateman, J.E.

    2002-01-01

    Extended X-ray absorption fine structure (EXAFS) studies are a powerful technique for studying the chemical environment of specific atoms in a molecular or solid matrix. The study of the surface layers of 'thick' materials introduces special problems due to the different escape depths of the various primary and secondary emission products which follow X-ray absorption. The processes are governed by the properties of the emitted fluorescent photons or electrons and of the material. Their interactions can easily destroy the linear relation between the detected signal and the absorption cross-section. Also affected are the probe depth within the surface and the background superimposed on the detected emission signal. A general mathematical model of the escape processes is developed which permits the optimisation of the detection modality (X-rays or electrons) and the experimental variables to suit the composition of any given surface under study

  18. Lactobacillus rhamnosus PB01 (DSM 14870) supplementation affects markers of sperm kinematic parameters in a diet-induced obesity mice model

    DEFF Research Database (Denmark)

    Dardmeh, Fereshteh; Alipour, Hiva; Gazerani, Parisa

    2017-01-01

    Probiotics have been proposed as alternatives to pharmacological products in several medical conditions including the modulation of obesity, which is frequently associated with poor semen quality. However, effects of probiotics on male fertility have been less investigated. This study assessed...... the effect of Lactobacillus rhamnosus PB01 (DSM-14870) on sperm kinematic parameters in Normal-weight (NW) and diet-induced obese (DIO) models. NW and DIO C57BL/6NTac mice were divided into two subgroups with or without a single daily dose (1x109CFU) of L. rhamnosus for four weeks. Sperm motility...

  19. Anxiety and DSM-5.

    Science.gov (United States)

    Kupfer, David J

    2015-09-01

    The DSM-5 process, and the publication of DSM-5 in 2013, have had a considerable impact on the classification of anxiety disorders. Major changes included the reorganization of the chapter structure, individual groupings of disorders within each chapter from a life span viewpoint, and the use of specifiers. The DSM-5 chapter on anxiety disorders does not include obsessive-compulsive disorder or post-traumatic stress disorder. The chapter itself now reflects a developmental approach. The text of each disorder has been enhanced with short sections on development and course, risk and prognostic factors, etc. It is expected that the reformulation of anxiety disorders in DSM-5 will lead to greater precision in a variety of ways, as illustrated in the papers in this issue of Dialogues in Clinical Neuroscience. In summary, these changes in the way we classify anxiety disorders reflect our best view on the clinical empirical data and should prove useful in the assessment of specific anxiety disorders.

  20. RPC Stereo Processor (rsp) - a Software Package for Digital Surface Model and Orthophoto Generation from Satellite Stereo Imagery

    Science.gov (United States)

    Qin, R.

    2016-06-01

    Large-scale Digital Surface Models (DSM) are very useful for many geoscience and urban applications. Recently developed dense image matching methods have popularized the use of image-based very high resolution DSM. Many commercial/public tools that implement matching methods are available for perspective images, but there are rare handy tools for satellite stereo images. In this paper, a software package, RPC (rational polynomial coefficient) stereo processor (RSP), is introduced for this purpose. RSP implements a full pipeline of DSM and orthophoto generation based on RPC modelled satellite imagery (level 1+), including level 2 rectification, geo-referencing, point cloud generation, pan-sharpen, DSM resampling and ortho-rectification. A modified hierarchical semi-global matching method is used as the current matching strategy. Due to its high memory efficiency and optimized implementation, RSP can be used in normal PC to produce large format DSM and orthophotos. This tool was developed for internal use, and may be acquired by researchers for academic and non-commercial purpose to promote the 3D remote sensing applications.

  1. Incremental validity of the PID-5 in relation to the five factor model and traditional polythetic personality criteria of the DSM-5.

    Science.gov (United States)

    Fowler, J Christopher; Patriquin, Michelle A; Madan, Alok; Allen, Jon G; Frueh, B Christopher; Oldham, John M

    2017-06-01

    This study assessed the incremental validity of the Personality Inventory for DSM-5 (PID-5) beyond the impact of demographic, burden of illness, five-factor model of personality, and DSM-5 personality disorder criteria with respect to associations with admission psychiatric symptoms and functional disability. Psychiatric inpatients (N = 927) were administered the Big Five Inventory, PID-5, and personality disorder criteria counts. Prior treatment utilization, as well as baseline depression, anxiety, emotion regulation, and functional disability were administered within two days of the personality measures. Hierarchical regression models were used to explore the association of personality functioning with symptom functioning, emotion regulation and disability. Neuroticism was associated with all symptom measures, providing further support for its relevance in clinical populations. Personality trait domains (negative affect, detachment, and psychoticism) from the PID-5 demonstrated incremental validity in predicting baseline symptom and disability functioning over and above demographic, burden of illness, and psychiatric comorbidity and five-factor model (FFM) personality traits. Dimensional measures of personality functioning were consistently associated with baseline symptom functioning, supporting the relevance of personality functioning as it relates to psychiatric symptoms. The PID-5 uniquely contributed to the prediction of baseline symptom functioning, thus providing incremental validity over gold-standard personality trait measures. Copyright © 2016 John Wiley & Sons, Ltd.

  2. Modeling surface imperfections in thin films and nanostructured surfaces

    DEFF Research Database (Denmark)

    Hansen, Poul-Erik; Madsen, J. S.; Jensen, S. A.

    2017-01-01

    Accurate scatterometry and ellipsometry characterization of non-perfect thin films and nanostructured surfaces are challenging. Imperfections like surface roughness make the associated modelling and inverse problem solution difficult due to the lack of knowledge about the imperfection...

  3. Lunar surface vehicle model competition

    Science.gov (United States)

    1990-01-01

    During Fall and Winter quarters, Georgia Tech's School of Mechanical Engineering students designed machines and devices related to Lunar Base construction tasks. These include joint projects with Textile Engineering students. Topics studied included lunar environment simulator via drop tower technology, lunar rated fasteners, lunar habitat shelter, design of a lunar surface trenching machine, lunar support system, lunar worksite illumination (daytime), lunar regolith bagging system, sunlight diffusing tent for lunar worksite, service apparatus for lunar launch vehicles, lunar communication/power cables and teleoperated deployment machine, lunar regolith bag collection and emplacement device, soil stabilization mat for lunar launch/landing site, lunar rated fastening systems for robotic implementation, lunar surface cable/conduit and automated deployment system, lunar regolith bagging system, and lunar rated fasteners and fastening systems. A special topics team of five Spring quarter students designed and constructed a remotely controlled crane implement for the SKITTER model.

  4. A NEW APPROACH OF DIGITAL BRIDGE SURFACE MODEL GENERATION

    Directory of Open Access Journals (Sweden)

    H. Ju

    2012-07-01

    Full Text Available Bridge areas present difficulties for orthophotos generation and to avoid “collapsed” bridges in the orthoimage, operator assistance is required to create the precise DBM (Digital Bridge Model, which is, subsequently, used for the orthoimage generation. In this paper, a new approach of DBM generation, based on fusing LiDAR (Light Detection And Ranging data and aerial imagery, is proposed. The no precise exterior orientation of the aerial image is required for the DBM generation. First, a coarse DBM is produced from LiDAR data. Then, a robust co-registration between LiDAR intensity and aerial image using the orientation constraint is performed. The from-coarse-to-fine hybrid co-registration approach includes LPFFT (Log-Polar Fast Fourier Transform, Harris Corners, PDF (Probability Density Function feature descriptor mean-shift matching, and RANSAC (RANdom Sample Consensus as main components. After that, bridge ROI (Region Of Interest from LiDAR data domain is projected to the aerial image domain as the ROI in the aerial image. Hough transform linear features are extracted in the aerial image ROI. For the straight bridge, the 1st order polynomial function is used; whereas, for the curved bridge, 2nd order polynomial function is used to fit those endpoints of Hough linear features. The last step is the transformation of the smooth bridge boundaries from aerial image back to LiDAR data domain and merge them with the coarse DBM. Based on our experiments, this new approach is capable of providing precise DBM which can be further merged with DTM (Digital Terrain Model derived from LiDAR data to obtain the precise DSM (Digital Surface Model. Such a precise DSM can be used to improve the orthophoto product quality.

  5. DSM pocket guidebook

    Energy Technology Data Exchange (ETDEWEB)

    1991-04-01

    It has been estimated that if electricity were used more efficiently with commercially available end-use technologies, 24%--44% of the nation's current demand for electricity could be eliminated. Almost all major electric utilities in the west are investigating such demand-side management (DSM) opportunities. In some service territories, for example, improved efficiency could soon produce as much power as that from new coal-fired plants and produce it at a lower cost. Even utilities that currently have excess capacity are finding that DSM offers an opportunity to build efficient end-use stock to help them meet their future load shape objectives. Utility DSM programs typically consist of several measures designed to modify the utility's load shape (for example, innovative rate structures, direct utility control of loads, promotion of energy-efficient technologies, and customer education). The coordinated implementation of such measures requires planning, analysis of options, engineering, marketing, monitoring, and other coordination activities. This guidebook addresses one facet of an overall DSM program: selection of end-use technologies within the electrical utilities. This guidebook is intended to be a quick reference source both for utility field representatives in their customer interactions and for utility planners in the early stages of developing a DSM program. Finally, this guidebook is directed primarily at small municipal utilities and rural electric cooperatives within the Western Area Power Administration (Western) service area.

  6. MALADAPTIVE PERSONALITY TRAITS AND INTERNET ADDICTION SYMPTOMS AMONG YOUNG ADULTS: A STUDY BASED ON THE ALTERNATIVE DSM-5 MODEL FOR PERSONALITY DISORDERS

    Directory of Open Access Journals (Sweden)

    Alessia M. Gervasi

    2017-02-01

    Full Text Available Objective: This study aims to examine the relationship between maladaptive personality traits and Internet addiction symptoms among young adults. Even though the linkage between personality traits and problematic Internet use has already been investigated in several studies, the need exists to explore how dysfunctional variants of personality traits, as conceived in the alternative DSM-5 model for personality disorders, are linked to the misuse of the Internet in young adults. Method: Three hundred forty-nine university students aged between 18 and 25 years old completed measures on Internet use, Internet addiction symptoms, and maladaptive personality traits. Results: Internet addiction scores were associated with all of the DSM-5 domains of maladaptive personality traits. A hierarchical multiple regression analysis showed that negative affectivity, disinhibition, and psychoticism predicted Internet addiction symptoms. Conclusions: The findings of this study suggest that clinical interventions aimed at fostering affect regulation and at integrating disorganized mental states may be helpful for young adults who display problematic Internet use.

  7. Scoring the DSM-IV personality disorders using the Five-Factor Model: development and validation of normative scores for North American, French, and Dutch-Flemish samples.

    Science.gov (United States)

    Miller, Joshua D; Lynam, Donald R; Rolland, Jean-Pierre; De Fruyt, Filip; Reynolds, Sarah K; Pham-Scottez, Alexandra; Baker, Spencer R; Bagby, R Michael

    2008-10-01

    Five-Factor Model (FFM) personality disorder (PD) counts have demonstrated significant convergent and discriminant validity with DSM-IV PD symptoms. However, these FFM PD counts are of limited clinical use without normative data because it is difficult to determine what a specific score means with regard to the relative level of elevation. The current study presents data from three large normative samples that can be used as norms for the FFM PD counts in the respective countries: United States (N = 1,000), France (N = 801), and Belgium-Netherlands (N = 549). The present study also examines the performance, with regard to diagnostic efficiency, of statistically-defined cut-offs at 1.5 standard deviations above the mean (T > or = 65) versus previously identified cut-offs using receiver-operator characteristics (ROC) analyses. These cut-offs are tested in three clinical samples-one from each of the aforementioned countries. In general, the T > or = 65 cut-offs performed similarly to those identified using ROC analyses and manifested properties relevant to a screening instrument. These normative data allow FFM data to be used in a flexible and comprehensive manner, which may include scoring this type of personality data in order to screen for DSM-IV PD constructs.

  8. DSM-5 field survey

    DEFF Research Database (Denmark)

    Lochner, Christine; Grant, Jon E; Odlaug, Brian Lawrence

    2012-01-01

    Pathologic skin picking (skin picking disorder [SPD]) is a prevalent and disabling condition, which has received increasing study. It is timely to consider including SPD in DSM-5. The aim of this field survey was to investigate possible diagnostic criteria for SPD.......Pathologic skin picking (skin picking disorder [SPD]) is a prevalent and disabling condition, which has received increasing study. It is timely to consider including SPD in DSM-5. The aim of this field survey was to investigate possible diagnostic criteria for SPD....

  9. Biodistribution of 10B in a rat liver tumor model following intra-arterial administration of sodium borocaptate (BSH)/degradable starch microspheres (DSM) emulsion

    International Nuclear Information System (INIS)

    Suzuki, Minoru; Nagata, Kenji; Masunaga, Shinichiro; Kinashi, Yuko; Sakurai, Yoshinori; Maruhashi, Akira; Ono, Koji

    2004-01-01

    We reported that intra-arterial administration of borocaptate sodium (BSH)/lipiodol emulsion provided selectively high 10 B concentrations (approximately 200 ppm 6 h after administration) in experimental liver tumors. In the present study, we investigated the pharmacokinetics of BSH following intra-arterial administration of BSH with other embolizing agent, degradable starch microspheres (DSM). The 10 B concentration in the tumor at 1 h after administration of BSH with DSM was 231 ppm. At 6 h, the 10 B concentration in the tumor in BSH with DSM group was 81.5 ppm. The 10 B concentration in the liver at 1 h after administration of BSH with DSM was 184 ppm. At 6 h, the 10 B concentration in the liver in BSH with DSM group was 78 ppm. The tumor/liver 10 B concentration ratios (T/L ratio) in the 'BSH+DSM' group were significantly smaller than those in the 'BSH+lipiodol' group at 1 h (1.4 vs. 3.6) and 6 h (1.1 vs. 14.9). BSH/DSM-boron neutron capture therapy (BNCT) was not suitable for treatment of multiple liver tumors due to the low T/L 10 B concentration ratio. However, the high 10 B accumulation in the liver tumors following intra-arterial administration of BSH/DSM emulsion suggests that BSH/DSM-BNCT has the potential for application to malignant tumors in other sites

  10. Verslavingsgedrag van DSM-IV naar DSM-5

    NARCIS (Netherlands)

    van den Brink, W.

    2014-01-01

    The 5th edition of the DSM was published in May, 2013. The new edition incorporates important changes in the classification of addiction. To compare the classification of addictive behaviours presented in DSM-IV with the classification presented in DSM-5 and to comment on the changes introduced into

  11. Explaining "DSM" to Parents

    Science.gov (United States)

    Kent, Marcia

    2013-01-01

    "The Diagnostic and Statistical Manual of Mental Disorders" ("DSM") is useful for children and families for three practical reasons: (1) It provides a way to communicate about emotional and behavioral problems of youth in a common language; (2) Parents can get an Individual Education Plan (IEP) for a child if that process…

  12. Modelling the Effect of Different Substrates and Temperature on the Growth and Lactic Acid Production by Lactobacillus amylovorus DSM 20531T in Batch Process

    Directory of Open Access Journals (Sweden)

    Antonija Trontel

    2010-01-01

    Full Text Available Amylolytic lactic acid bacterium Lactobacillus amylovorus DSM 20531T utilised glucose, sucrose and starch as a sole carbon and energy source. The three substrates were completely depleted from MRS medium during batch cultivations carried out in a laboratory scale stirred tank bioreactor at constant temperature (40 °C and pH value (5.5. Under the tested conditions, the bacterium was capable of conducting simultaneously starch hydrolysis and fermentation. A mixture of two stereoisomers, D-(–- and L-(+-lactic acid, was produced in all cases by highly efficient homofermentative bioprocess with 0.93 to 1 g of lactate produced per g of total (consumed substrate. The effect of temperature on the kinetics of cell growth and lactic acid production by the amylolytic strain in the starch-containing medium was also investigated. Efficient simultaneous saccharification and fermentation (SSF was obtained at 35, 40 and 45 °C with completely degraded complex carbohydrate in 8 to 12 h and the product yield coefficient in the range from 0.91 to 0.93 g/g. Maximum values for substrate consumption rate (0.89 h^–1, maximum specific growth rate (0.87 h^–1, product formation rate (2.01 h^–1, and productivity of lactic acid (1.45 g/(L·h were obtained at 45 °C, while maximum biomass concentration (4.38 g/L was attained at 40 °C. The ratio of the two stereoisomeric forms of produced lactic acid was strongly affected by the temperature. Unstructured kinetic model was used to describe the consumption of the three substrates, bacterial biomass formation and lactic acid production by L. amylovorus DSM 20531T. The dependence of biokinetic parameters on temperature was described by cardinal temperature model. The applied models successfully predicted all experimental data.

  13. BUILDING DETECTION USING AERIAL IMAGES AND DIGITAL SURFACE MODELS

    Directory of Open Access Journals (Sweden)

    J. Mu

    2017-05-01

    Full Text Available In this paper a method for building detection in aerial images based on variational inference of logistic regression is proposed. It consists of three steps. In order to characterize the appearances of buildings in aerial images, an effective bag-of-Words (BoW method is applied for feature extraction in the first step. In the second step, a classifier of logistic regression is learned using these local features. The logistic regression can be trained using different methods. In this paper we adopt a fully Bayesian treatment for learning the classifier, which has a number of obvious advantages over other learning methods. Due to the presence of hyper prior in the probabilistic model of logistic regression, approximate inference methods have to be applied for prediction. In order to speed up the inference, a variational inference method based on mean field instead of stochastic approximation such as Markov Chain Monte Carlo is applied. After the prediction, a probabilistic map is obtained. In the third step, a fully connected conditional random field model is formulated and the probabilistic map is used as the data term in the model. A mean field inference is utilized in order to obtain a binary building mask. A benchmark data set consisting of aerial images and digital surfaced model (DSM released by ISPRS for 2D semantic labeling is used for performance evaluation. The results demonstrate the effectiveness of the proposed method.

  14. Modeling growth of Alicyclobacillus acidoterrestris DSM 3922 type strain vegetative cells in the apple juice with nisin and lysozyme

    Directory of Open Access Journals (Sweden)

    Celenk Molva

    2017-05-01

    Full Text Available In the present study, the effect of storage temperature on A. acidoterrestris DSM 3922 cells (105 CFU/mL was examined during growth in reconstituted apple juice (pH 3.8, °Brix 11.3 containing nisin (0–100 IU/mL and lysozyme (0–100 mg/L. The growth curves were obtained at three temperatures of 27, 35 and 43 °C using absorbance data (OD600 nm. Based on the results, the minimal inhibitory concentrations (MICs of nisin were found as 10 IU/mL at all tested temperatures. On the other hand, increasing the temperature decreased the amount of lysozyme for growth inhibition. The MICs of lysozyme were found as 10, 2.5 and 1.25 mg/L at 27, 35 and 43 °C, respectively. At selected non-inhibitory doses, nisin (1.25–5 IU/mL and lysozyme (0.3–2.5 mg/L prolonged the lag time compared to the controls at the corresponding temperatures. In addition, there was a strong linear relationship between the lag time and lysozyme concentrations at 27 and 35 °C (R2 > 0.98. The results of this study demonstrated that both nisin and lysozyme could be used to inhibit the growth of A. acidoterrestris cells in the apple juice. The results also indicated that the growth parameters were variable depending on the storage temperature and the type of the antimicrobial agent used in the apple juice.

  15. Surface-complexation models for sorption onto heterogeneous surfaces

    International Nuclear Information System (INIS)

    Harvey, K.B.

    1997-10-01

    This report provides a description of the discrete-logK spectrum model, together with a description of its derivation, and of its place in the larger context of surface-complexation modelling. The tools necessary to apply the discrete-logK spectrum model are discussed, and background information appropriate to this discussion is supplied as appendices. (author)

  16. Effect of galactooligosaccharides and Bifidobacterium animalis Bb-12 on growth of Lactobacillus amylovorus DSM 16698, microbial community structure, and metabolite production in an in vitro colonic model set up with human or pig microbiota

    NARCIS (Netherlands)

    Martinez, R.C.R.; Cardarelli, H.R.; Borst, W.; Albrecht, S.; Schols, H.; Gutiérrez, O.P.; Maathuis, A.J.H.; Melo Franco, B.D.G. de; Martinis, E.C.P. de; Zoetendal, E.G.; Venema, K.; Saad, S.M.I.; Smidt, H.

    2013-01-01

    A validated in vitro model of the large intestine (TIM-2), set up with human or pig faeces, was used to evaluate the impact of potentially probiotic Lactobacillus amylovorus DSM 16698, administered alone (i), in the presence of prebiotic galactooligosaccharides (GOS) (ii), and co-administered with

  17. Surface Flux Modeling for Air Quality Applications

    Directory of Open Access Journals (Sweden)

    Limei Ran

    2011-08-01

    Full Text Available For many gasses and aerosols, dry deposition is an important sink of atmospheric mass. Dry deposition fluxes are also important sources of pollutants to terrestrial and aquatic ecosystems. The surface fluxes of some gases, such as ammonia, mercury, and certain volatile organic compounds, can be upward into the air as well as downward to the surface and therefore should be modeled as bi-directional fluxes. Model parameterizations of dry deposition in air quality models have been represented by simple electrical resistance analogs for almost 30 years. Uncertainties in surface flux modeling in global to mesoscale models are being slowly reduced as more field measurements provide constraints on parameterizations. However, at the same time, more chemical species are being added to surface flux models as air quality models are expanded to include more complex chemistry and are being applied to a wider array of environmental issues. Since surface flux measurements of many of these chemicals are still lacking, resistances are usually parameterized using simple scaling by water or lipid solubility and reactivity. Advances in recent years have included bi-directional flux algorithms that require a shift from pre-computation of deposition velocities to fully integrated surface flux calculations within air quality models. Improved modeling of the stomatal component of chemical surface fluxes has resulted from improved evapotranspiration modeling in land surface models and closer integration between meteorology and air quality models. Satellite-derived land use characterization and vegetation products and indices are improving model representation of spatial and temporal variations in surface flux processes. This review describes the current state of chemical dry deposition modeling, recent progress in bi-directional flux modeling, synergistic model development research with field measurements, and coupling with meteorological land surface models.

  18. Minimal Model Theory for Log Surfaces

    OpenAIRE

    Fujino, Osamu

    2012-01-01

    We discuss the log minimal model theory for log surfaces. We show that the log minimal model program, the finite generation of log canonical rings, and the log abundance theorem for log surfaces hold true under assumptions weaker than the usual framework of the log minimal model theory.

  19. Accuracy Assessment of Digital Surface Models from Unmanned Aerial Vehicles’ Imagery on Glaciers

    Directory of Open Access Journals (Sweden)

    Saskia Gindraux

    2017-02-01

    Full Text Available The use of Unmanned Aerial Vehicles (UAV for photogrammetric surveying has recently gained enormous popularity. Images taken from UAVs are used for generating Digital Surface Models (DSMs and orthorectified images. In the glaciological context, these can serve for quantifying ice volume change or glacier motion. This study focuses on the accuracy of UAV-derived DSMs. In particular, we analyze the influence of the number and disposition of Ground Control Points (GCPs needed for georeferencing the derived products. A total of 1321 different DSMs were generated from eight surveys distributed on three glaciers in the Swiss Alps during winter, summer and autumn. The vertical and horizontal accuracy was assessed by cross-validation with thousands of validation points measured with a Global Positioning System. Our results show that the accuracy increases asymptotically with increasing number of GCPs until a certain density of GCPs is reached. We call this the optimal GCP density. The results indicate that DSMs built with this optimal GCP density have a vertical (horizontal accuracy ranging between 0.10 and 0.25 m (0.03 and 0.09 m across all datasets. In addition, the impact of the GCP distribution on the DSM accuracy was investigated. The local accuracy of a DSM decreases when increasing the distance to the closest GCP, typically at a rate of 0.09 m per 100-m distance. The impact of the glacier’s surface texture (ice or snow was also addressed. The results show that besides cases with a surface covered by fresh snow, the surface texture does not significantly influence the DSM accuracy.

  20. Latent Factor Structure of DSM-5 Posttraumatic Stress Disorder

    Science.gov (United States)

    Gentes, Emily; Dennis, Paul A.; Kimbrel, Nathan A.; Kirby, Angela C.; Hair, Lauren P.; Beckham, Jean C.; Calhoun, Patrick S.

    2015-01-01

    The current study examined the latent factor structure of posttraumatic stress disorder (PTSD) based on DSM-5 criteria in a sample of participants (N = 374) recruited for studies on trauma and health. Confirmatory factor analyses (CFA) were used to compare the fit of the previous 3-factor DSM-IV model of PTSD to the 4-factor model specified in DSM-5 as well as to a competing 4-factor “dysphoria” model (Simms, Watson, & Doebbeling, 2002) and a 5-factor (Elhai et al., 2011) model of PTSD. Results indicated that the Elhai 5-factor model (re-experiencing, active avoidance, emotional numbing, dysphoric arousal, anxious arousal) provided the best fit to the data, although substantial support was demonstrated for the DSM-5 4-factor model. Low factor loadings were noted for two of the symptoms in the DSM-5 model (psychogenic amnesia and reckless/self-destructive behavior), which raises questions regarding the adequacy of fit of these symptoms with other core features of the disorder. Overall, the findings from the present research suggest the DSM-5 model of PTSD is a significant improvement over the previous DSM-IV model of PTSD. PMID:26366290

  1. Dynamical modeling of surface tension

    International Nuclear Information System (INIS)

    Brackbill, J.U.; Kothe, D.B.

    1996-01-01

    In a recent review it is said that free-surface flows ''represent some of the difficult remaining challenges in computational fluid dynamics''. There has been progress with the development of new approaches to treating interfaces, such as the level-set method and the improvement of older methods such as the VOF method. A common theme of many of the new developments has been the regularization of discontinuities at the interface. One example of this approach is the continuum surface force (CSF) formulation for surface tension, which replaces the surface stress given by Laplace's equation by an equivalent volume force. Here, we describe how CSF might be made more useful. Specifically, we consider a derivation of the CSF equations from a minimization of surface energy as outlined by Jacqmin. This reformulation suggests that if one eliminates the computation of curvature in terms of a unit normal vector, parasitic currents may be eliminated For this reformulation to work, it is necessary that transition region thickness be controlled. Various means for this, in addition to the one discussed by Jacqmin are discussed

  2. Toward a model for assessing level of personality functioning in DSM-5, part II: empirical articulation of a core dimension of personality pathology

    NARCIS (Netherlands)

    Morey, L.C.; Berghuis, H.; Bender, D.S.; Verheul, R.; Krueger, R.F.; Skodol, A.E.

    2011-01-01

    The extensive comorbidity among Diagnostic and Statistical Manual of Mental Disorders (4th ed. [DSM-IV]; American Psychiatric Association, 1994) personality disorders might be compelling evidence of essential commonalities among these disorders reflective of a general level of personality

  3. An Interpersonal Analysis of Pathological Personality Traits in DSM-5

    Science.gov (United States)

    Wright, Aidan G.C.; Pincus, Aaron L.; Hopwood, Christopher J.; Thomas, Katherine M.; Markon, Kristian E.; Krueger, Robert F.

    2012-01-01

    The proposed changes to the personality disorder section of the DSM-5 places an increased focus on interpersonal impairment as one of the defining features of personality psychopathology. In addition, a proposed trait model has been offered to provide a means of capturing phenotypic variation on the expression of personality disorder. In this study, we subject the proposed DSM-5 traits to interpersonal analysis using the Inventory of Interpersonal Problems – Circumplex scales via the structural summary method for circumplex data. DSM-5 traits were consistently associated with generalized interpersonal dysfunction suggesting that they are maladaptive in nature, the majority of traits demonstrated discriminant validity with prototypical and differentiated interpersonal problem profiles, and conformed well to a priori hypothesized associations. These results are discussed in the context of the DSM-5 proposal and contemporary interpersonal theory, with a particular focus on potential areas for expansion of the DSM-5 trait model. PMID:22589411

  4. Lactobacillus rhamnosus PB01 (DSM 14870 supplementation affects markers of sperm kinematic parameters in a diet-induced obesity mice model.

    Directory of Open Access Journals (Sweden)

    Fereshteh Dardmeh

    Full Text Available Probiotics have been proposed as alternatives to pharmacological products in several medical conditions including the modulation of obesity, which is frequently associated with poor semen quality. However, effects of probiotics on male fertility have been less investigated. This study assessed the effect of Lactobacillus rhamnosus PB01 (DSM-14870 on sperm kinematic parameters in Normal-weight (NW and diet-induced obese (DIO models. NW and DIO C57BL/6NTac mice were divided into two subgroups with or without a single daily dose (1x109CFU of L. rhamnosus for four weeks. Sperm motility and kinematics together with blood lipid profiles and reproductive hormone levels were assessed using the sperm class analyzer system. Probiotic supplementation increased serum testosterone, LH and FSH levels in both NW and DIO groups resulting in significantly (P<0.05 higher velocity (VSL, VCL and VAP and percentages of progressively motile sperm and significantly lower percentages of immotile sperm. Other kinematic parameters (Lin, STR, ALH and BCF were also increased in both probiotic supplemented DIO and NW groups at the 10% level of significance. Probiotic supplemented DIO mice demonstrated significantly higher percentages of progressively motile sperm versus DIO controls. This study demonstrated the potential of L. rhamnosus PB01 as a regulatory agent with positive effects on weight loss and reproductive-hormones, significantly improving sperm motility and kinematic parameters in male DIO models.

  5. The 7-factor hybrid model of DSM-5 PTSD symptoms and alcohol consumption and consequences in a national sample of trauma-exposed veterans.

    Science.gov (United States)

    Claycomb Erwin, Meredith; Charak, Ruby; Durham, Tory A; Armour, Cherie; Lv, Xin; Southwick, Steven M; Elhai, Jon D; Pietrzak, Robert H

    2017-10-01

    The purpose of the present study was to investigate associations between the 7-factor hybrid model of DSM-5 posttraumatic stress disorder (PTSD) symptoms, which includes intrusions, avoidance, negative affect, anhedonia, externalizing behaviors, anxious arousal, and dysphoric arousal symptoms, and alcohol consumption and consequences. A nationally representative sample of 916 trauma-exposed U.S. military veterans were administered the Trauma History Screen, PTSD Checklist-5, and Alcohol Use Disorders Identification Test. Confirmatory factor analyses were conducted to determine associations between the 7-factor hybrid model of PTSD symptoms, and alcohol consumption and consequences. Results revealed that lifetime dysphoric arousal (r=0.31), negative affect (r=0.30), and anhedonia (r=0.29) symptom clusters were most strongly associated with past-year alcohol consequences. No significant associations were observed for alcohol consumption. While the cross-sectional study design does not allow one to ascertain causative associations between PTSD factors and alcohol consumption and consequences, results generally align with the self-medication hypothesis, as PTSD factors reflecting internalizing were most strongly related to alcohol-related consequences. These results underscore the importance of assessing for alcohol use problems in veterans who score highly on PTSD symptoms reflecting internalizing symptomatology. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. Lactobacillus rhamnosus PB01 (DSM 14870) supplementation affects markers of sperm kinematic parameters in a diet-induced obesity mice model.

    Science.gov (United States)

    Dardmeh, Fereshteh; Alipour, Hiva; Gazerani, Parisa; van der Horst, Gerhard; Brandsborg, Erik; Nielsen, Hans Ingolf

    2017-01-01

    Probiotics have been proposed as alternatives to pharmacological products in several medical conditions including the modulation of obesity, which is frequently associated with poor semen quality. However, effects of probiotics on male fertility have been less investigated. This study assessed the effect of Lactobacillus rhamnosus PB01 (DSM-14870) on sperm kinematic parameters in Normal-weight (NW) and diet-induced obese (DIO) models. NW and DIO C57BL/6NTac mice were divided into two subgroups with or without a single daily dose (1x109CFU) of L. rhamnosus for four weeks. Sperm motility and kinematics together with blood lipid profiles and reproductive hormone levels were assessed using the sperm class analyzer system. Probiotic supplementation increased serum testosterone, LH and FSH levels in both NW and DIO groups resulting in significantly (P<0.05) higher velocity (VSL, VCL and VAP) and percentages of progressively motile sperm and significantly lower percentages of immotile sperm. Other kinematic parameters (Lin, STR, ALH and BCF) were also increased in both probiotic supplemented DIO and NW groups at the 10% level of significance. Probiotic supplemented DIO mice demonstrated significantly higher percentages of progressively motile sperm versus DIO controls. This study demonstrated the potential of L. rhamnosus PB01 as a regulatory agent with positive effects on weight loss and reproductive-hormones, significantly improving sperm motility and kinematic parameters in male DIO models.

  7. Dynamic Factor Models for the Volatility Surface

    DEFF Research Database (Denmark)

    van der Wel, Michel; Ozturk, Sait R.; Dijk, Dick van

    The implied volatility surface is the collection of volatilities implied by option contracts for different strike prices and time-to-maturity. We study factor models to capture the dynamics of this three-dimensional implied volatility surface. Three model types are considered to examine desirable...

  8. Out of DSM: Depathologizing Homosexuality.

    Science.gov (United States)

    Drescher, Jack

    2015-12-04

    In 1973, the American Psychiatric Association (APA) removed the diagnosis of "homosexuality" from the second edition of its Diagnostic and Statistical Manual (DSM). This resulted after comparing competing theories, those that pathologized homosexuality and those that viewed it as normal. In an effort to explain how that decision came about, this paper reviews some historical scientific theories and arguments that first led to the placement of homosexuality in DSM-I and DSM-II as well as alternative theories that eventually led to its removal from DSM III and subsequent editions of the manual. The paper concludes with a discussion of the sociocultural aftermath of that 1973 decision.

  9. Out of DSM: Depathologizing Homosexuality

    Science.gov (United States)

    Drescher, Jack

    2015-01-01

    In 1973, the American Psychiatric Association (APA) removed the diagnosis of “homosexuality” from the second edition of its Diagnostic and Statistical Manual (DSM). This resulted after comparing competing theories, those that pathologized homosexuality and those that viewed it as normal. In an effort to explain how that decision came about, this paper reviews some historical scientific theories and arguments that first led to the placement of homosexuality in DSM-I and DSM-II as well as alternative theories that eventually led to its removal from DSM III and subsequent editions of the manual. The paper concludes with a discussion of the sociocultural aftermath of that 1973 decision. PMID:26690228

  10. Building extraction for 3D city modelling using airborne laser ...

    African Journals Online (AJOL)

    The ground points was used to generate digital terrain model (DTM) while digital surface model (DSM) was produced from the entire point cloud. From DSM and DTM, we obtained ... Then the extracted building footprints from the building class were further processed to generate 3D model. The model provides 3D visual ...

  11. Single-layer model for surface roughness.

    Science.gov (United States)

    Carniglia, C K; Jensen, D G

    2002-06-01

    Random roughness of an optical surface reduces its specular reflectance and transmittance by the scattering of light. The reduction in reflectance can be modeled by a homogeneous layer on the surface if the refractive index of the layer is intermediate to the indices of the media on either side of the surface. Such a layer predicts an increase in the transmittance of the surface and therefore does not provide a valid model for the effects of scatter on the transmittance. Adding a small amount of absorption to the layer provides a model that predicts a reduction in both reflectance and transmittance. The absorbing layer model agrees with the predictions of a scalar scattering theory for a layer with a thickness that is twice the rms roughness of the surface. The extinction coefficient k for the layer is proportional to the thickness of the layer.

  12. Bag model with diffuse surface

    International Nuclear Information System (INIS)

    Phatak, S.C.

    1986-01-01

    The constraint of a sharp bag boundary in the bag model is relaxed in the present work. This has been achieved by replacing the square-well potential of the bag model by a smooth scalar potential and introducing a term similar to the bag pressure term. The constraint of the conservation of the energy-momentum tensor is used to obtain an expression for the added bag pressure term. The model is then used to determine the static properties of the nucleon. The calculation shows that the rms charge radius and the nucleon magnetic moment are larger than the corresponding bag model values. Also, the axial vector coupling constant and the πNN coupling constant are in better agreement with the experimental values

  13. Response Surface Modeling Using Multivariate Orthogonal Functions

    Science.gov (United States)

    Morelli, Eugene A.; DeLoach, Richard

    2001-01-01

    A nonlinear modeling technique was used to characterize response surfaces for non-dimensional longitudinal aerodynamic force and moment coefficients, based on wind tunnel data from a commercial jet transport model. Data were collected using two experimental procedures - one based on modem design of experiments (MDOE), and one using a classical one factor at a time (OFAT) approach. The nonlinear modeling technique used multivariate orthogonal functions generated from the independent variable data as modeling functions in a least squares context to characterize the response surfaces. Model terms were selected automatically using a prediction error metric. Prediction error bounds computed from the modeling data alone were found to be- a good measure of actual prediction error for prediction points within the inference space. Root-mean-square model fit error and prediction error were less than 4 percent of the mean response value in all cases. Efficacy and prediction performance of the response surface models identified from both MDOE and OFAT experiments were investigated.

  14. DISSOCIATIVE DISORDERS IN DSM-5

    NARCIS (Netherlands)

    Spiegel, David; Loewenstein, Richard J.; Lewis-Fernandez, Roberto; Sar, Vedat; Simeon, Daphne; Vermetten, Eric; Cardena, Etzel; Dell, Paul F.

    Background: We present recommendations for revision of the diagnostic criteria for the Dissociative Disorders (DDs) for DSM-5. The periodic revision of the DSM provides an opportunity to revisit the assumptions underlying specific diagnoses and the empirical support, or lack of it, for the defining

  15. An Improved MUSIC Model for Gibbsite Surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Scott C.; Bickmore, Barry R.; Tadanier, Christopher J.; Rosso, Kevin M.

    2004-06-01

    Here we use gibbsite as a model system with which to test a recently published, bond-valence method for predicting intrinsic pKa values for surface functional groups on oxides. At issue is whether the method is adequate when valence parameters for the functional groups are derived from ab initio structure optimization of surfaces terminated by vacuum. If not, ab initio molecular dynamics (AIMD) simulations of solvated surfaces (which are much more computationally expensive) will have to be used. To do this, we had to evaluate extant gibbsite potentiometric titration data that where some estimate of edge and basal surface area was available. Applying BET and recently developed atomic force microscopy methods, we found that most of these data sets were flawed, in that their surface area estimates were probably wrong. Similarly, there may have been problems with many of the titration procedures. However, one data set was adequate on both counts, and we applied our method of surface pKa int prediction to fitting a MUSIC model to this data with considerable success—several features of the titration data were predicted well. However, the model fit was certainly not perfect, and we experienced some difficulties optimizing highly charged, vacuum-terminated surfaces. Therefore, we conclude that we probably need to do AIMD simulations of solvated surfaces to adequately predict intrinsic pKa values for surface functional groups.

  16. Personality disorder in DSM-5: an oral history.

    Science.gov (United States)

    Zachar, P; Krueger, R F; Kendler, K S

    2016-01-01

    As the revision process leading to DSM-5 began, the domain of personality disorder embodied the highest aspirations for major change. After an initial prototype-based proposal failed to gain acceptance, the Personality and Personality Disorders Work Group (P&PDWG) developed a hybrid model containing categorical and dimensional components. A clash of perspectives both within the P&PDWG and between the P&PDWG and DSM-5 oversight committees led to the rejection of this proposal from the main body of DSM-5. Major issues included conflicting ways of conceptualizing validation, differences of opinion from personality disorder experts outside the P&PDWG, divergent concepts of the magnitude of evidence needed to support substantial changes, and the disagreements about clinical utility of the hybrid model. Despite these setbacks, the 'Alternative DSM-5 Model of Personality Disorder' is presented in Section III of the DSM-5. Further research should clarify its performance relative to the DSM-IV criteria reprinted in the main DSM-5 text.

  17. Foundations of elastoplasticity subloading surface model

    CERN Document Server

    Hashiguchi, Koichi

    2017-01-01

    This book is the standard text book of elastoplasticity in which the elastoplasticity theory is comprehensively described from the conventional theory for the monotonic loading to the unconventional theory for the cyclic loading behavior. Explanations of vector-tensor analysis and continuum mechanics are provided first as a foundation for elastoplasticity theory, covering various strain and stress measures and their rates with their objectivities. Elastoplasticity has been highly developed by the creation and formulation of the subloading surface model which is the unified fundamental law for irreversible mechanical phenomena in solids. The assumption that the interior of the yield surface is an elastic domain is excluded in order to describe the plastic strain rate due to the rate of stress inside the yield surface in this model aiming at the prediction of cyclic loading behavior, although the yield surface enclosing the elastic domain is assumed in all the elastoplastic models other than the subloading surf...

  18. Surface Adsorption in Nonpolarizable Atomic Models.

    Science.gov (United States)

    Whitmer, Jonathan K; Joshi, Abhijeet A; Carlton, Rebecca J; Abbott, Nicholas L; de Pablo, Juan J

    2014-12-09

    Many ionic solutions exhibit species-dependent properties, including surface tension and the salting-out of proteins. These effects may be loosely quantified in terms of the Hofmeister series, first identified in the context of protein solubility. Here, our interest is to develop atomistic models capable of capturing Hofmeister effects rigorously. Importantly, we aim to capture this dependence in computationally cheap "hard" ionic models, which do not exhibit dynamic polarization. To do this, we have performed an investigation detailing the effects of the water model on these properties. Though incredibly important, the role of water models in simulation of ionic solutions and biological systems is essentially unexplored. We quantify this via the ion-dependent surface attraction of the halide series (Cl, Br, I) and, in so doing, determine the relative importance of various hypothesized contributions to ionic surface free energies. Importantly, we demonstrate surface adsorption can result in hard ionic models combined with a thermodynamically accurate representation of the water molecule (TIP4Q). The effect observed in simulations of iodide is commensurate with previous calculations of the surface potential of mean force in rigid molecular dynamics and polarizable density-functional models. Our calculations are direct simulation evidence of the subtle but sensitive role of water thermodynamics in atomistic simulations.

  19. Modeling and Inversion of Scattered Surface waves

    NARCIS (Netherlands)

    Riyanti, C.D.

    2005-01-01

    In this thesis, we present a modeling method based on a domain-type integral representation for waves propagating along the surface of the Earth which have been scattered in the vicinity of the source or the receivers. Using this model as starting point, we formulate an inversion scheme to estimate

  20. Draft Genome Sequences of the Probiotic Enterococcus faecalis Symbioflor 1 Clones DSM16430 and DSM16434

    OpenAIRE

    Fritzenwanker, Moritz; Chakraborty, Anindita; Hain, Torsten; Zimmermann, Kurt; Domann, Eugen

    2016-01-01

    The probiotic Symbioflor 1 is a historical concoction of 10 isolates of Enterococcus faecalis. Pulsed-field gel electrophoresis revealed two groups: one comprising eight identical clones (DSM16430, DSM16432, DSM16433, DSM16435 to DSM16439) and a further two isolates (DSM16431, DSM16434) with marginally different profiles. Here, we report a comparative analysis of the draft genome sequences of representative isolates.

  1. DSM-5: Challenging diagnostic testimony.

    Science.gov (United States)

    Hagan, Leigh D; Guilmette, Thomas J

    2015-01-01

    The Diagnostic and Statistical Manual of Mental Disorders' (DSM) 60-year evolution has not been particularly linear nor cumulative with respect to the process of its construction, its stated purpose, its framework, and inclusion of specific disorders. We consider DSM-5's stated purpose in light of the manual's explicit cautions and other complications encountered when presenting diagnoses in the course of psychological expert testimony under the applicable rules of evidence. This review considers the extent to which DSM-5 bears up under numerous criticisms when employed for forensic purposes and points out challenges that the expert should anticipate when offering diagnostic opinions underpinned by DSM-5 generally and by neurocognitive disorders in particular. Copyright © 2015 Elsevier Ltd. All rights reserved.

  2. Out of DSM: Depathologizing Homosexuality

    Directory of Open Access Journals (Sweden)

    Jack Drescher

    2015-12-01

    Full Text Available In 1973, the American Psychiatric Association (APA removed the diagnosis of “homosexuality” from the second edition of its Diagnostic and Statistical Manual (DSM. This resulted after comparing competing theories, those that pathologized homosexuality and those that viewed it as normal. In an effort to explain how that decision came about, this paper reviews some historical scientific theories and arguments that first led to the placement of homosexuality in DSM-I and DSM-II as well as alternative theories that eventually led to its removal from DSM III and subsequent editions of the manual. The paper concludes with a discussion of the sociocultural aftermath of that 1973 decision.

  3. DSM renewable opportunities in Boston

    Energy Technology Data Exchange (ETDEWEB)

    Tennis, M.W.; Nogee, A.J. [Union of Concerned Scientists, Cambridge, MA (United States); Coakley, S. [Boston Edison DSM Settlement Board, Lexington, MA (United States); Schoengold, D. [MSB Energy Associates, Middleton, WI (United States)

    1995-11-01

    The Union of Concerned Scientists (UCS), in conjunction with MSB Energy Associates, conducted a study for the Boston Edison Demand-Side Management (DSM) Settlement Board on the potential for DSM renewables in the Boston area. DSM renewables are resources that can be used in a distributed utility approach to avoid transmission and distribution (T and D) costs, as well as costs associated with operating and building power plants. The results show that avoided costs in areas with deferrable T and D investments can be nearly twice as high as system-wide average avoided costs. As a result, renewable technologies that might not be considered cost effective as DSM under system-wide average criteria, can produce large shavings for the utility and its customers. Adopting a deliberate program designed to provide sustained orderly development of these renewables is essential in order for renewable technologies to achieve the maximum level of cost-effectiveness and net savings.

  4. Paraphilic diagnoses in DSM-5.

    Science.gov (United States)

    Krueger, Richard B; Kaplan, Meg S

    2012-01-01

    The DSM-5 has been under revision since 1999 and is scheduled for publication in 2013. This article will review the major proposed modifications of the Paraphilias. The information reviewed was obtained from PubMed, PsychInfo, the DSM-5.org website and other sources and reviewed. Pedohebephilia, Hypersexual Disorder and Paraphilic Coercive Disorder are new proposed diagnoses. Paraphilias have been assigned their own chapter in DSM- 5 and a distinction has been made between Paraphilias and Paraphilic Disorders. Victim numbers have been included in diagnosis of paraphilias that involve victims and remission and severity measures have been added to all paraphilias. Transvestic Disorder can apply to males or females, Fetishistic Disorder now includes partialism, and Sexual Masochism Disorder has Asphyxiophilia as a specifier. This study is based on a literature review and influenced by the knowledge and biases of the authors. The Paraphilic Disorders Section of the DSM-5 represents a significant departure from DSMIV-TR.

  5. Surface physics theoretical models and experimental methods

    CERN Document Server

    Mamonova, Marina V; Prudnikova, I A

    2016-01-01

    The demands of production, such as thin films in microelectronics, rely on consideration of factors influencing the interaction of dissimilar materials that make contact with their surfaces. Bond formation between surface layers of dissimilar condensed solids-termed adhesion-depends on the nature of the contacting bodies. Thus, it is necessary to determine the characteristics of adhesion interaction of different materials from both applied and fundamental perspectives of surface phenomena. Given the difficulty in obtaining reliable experimental values of the adhesion strength of coatings, the theoretical approach to determining adhesion characteristics becomes more important. Surface Physics: Theoretical Models and Experimental Methods presents straightforward and efficient approaches and methods developed by the authors that enable the calculation of surface and adhesion characteristics for a wide range of materials: metals, alloys, semiconductors, and complex compounds. The authors compare results from the ...

  6. Land-surface modelling in hydrological perspective

    DEFF Research Database (Denmark)

    Overgaard, Jesper; Rosbjerg, Dan; Butts, M.B.

    2006-01-01

    The purpose of this paper is to provide a review of the different types of energy-based land-surface models (LSMs) and discuss some of the new possibilities that will arise when energy-based LSMs are combined with distributed hydrological modelling. We choose to focus on energy-based approaches......, and the difficulties inherent in various evaluation procedures are presented. Finally, the dynamic coupling of hydrological and atmospheric models is explored, and the perspectives of such efforts are discussed....

  7. An interpersonal analysis of pathological personality traits in DSM-5.

    Science.gov (United States)

    Wright, Aidan G C; Pincus, Aaron L; Hopwood, Christopher J; Thomas, Katherine M; Markon, Kristian E; Krueger, Robert F

    2012-09-01

    The proposed changes to the personality disorder section of the Diagnostic and statistical manual of mental disorders (5th ed.) places an increased focus on interpersonal impairment as one of the defining features of personality psychopathology. In addition, a proposed trait model has been offered to provide a means of capturing phenotypic variation on the expression of personality disorder. In this study, the authors subject the proposed DSM-5 traits to interpersonal analysis using the inventory of interpersonal problems-circumplex scales via the structural summary method for circumplex data. DSM-5 traits were consistently associated with generalized interpersonal dysfunction suggesting that they are maladaptive in nature, the majority of traits demonstrated discriminant validity with prototypical and differentiated interpersonal problem profiles, and conformed well to a priori hypothesized associations. These results are discussed in the context of the DSM-5 proposal and contemporary interpersonal theory, with a particular focus on potential areas for expansion of the DSM-5 trait model.

  8. Alcoholgerelateerde cognitieve stoornissen in de DSM-5

    NARCIS (Netherlands)

    Walvoort, S.J.W.; Wester, A.J.; Doorakkers, M.C.; Kessels, R.P.C.; Egger, J.I.M.

    2016-01-01

    Achtergrond: Binnen de dsm-iv-tr zijn alcoholgerelateerde cognitieve stoornissen moeilijk onder te brengen, met als gevolg dat deze neurocognitieve stoornissen vaak over het hoofd worden gezien. De komst van de dsm-5 zou hierin uitkomst kunnen bieden. Doel: De dsm-5 vergelijken met de dsm-iv-tr

  9. Examining the stability of DSM-IV and empirically derived eating disorder classification: implications for DSM-5.

    Science.gov (United States)

    Peterson, Carol B; Crow, Scott J; Swanson, Sonja A; Crosby, Ross D; Wonderlich, Stephen A; Mitchell, James E; Agras, W Stewart; Halmi, Katherine A

    2011-12-01

    The purpose of this investigation was to derive an empirical classification of eating disorder symptoms in a heterogeneous eating disorder sample using latent class analysis (LCA) and to examine the longitudinal stability of these latent classes (LCs) and the stability of DSM-IV eating disorder (ED) diagnoses. A total of 429 females with ED symptoms were assessed using the Eating Disorder Examination every 6 months for 2 years. LCA was used to derive empirical classification at baseline. Latent transition analysis (LTA) was used to examine the longitudinal stability of LCs, and Markov modeling procedures were used to examine DSM-IV ED diagnoses over all the time points. LCA yielded a 3-class solution: binge eating and purging, binge eating only, and low body mass index. LTA indicated that these LCs showed greater stability over 2 years than DSM-IV diagnoses with the probability of remaining in the same class ranging from 0.69 to 0.91 for LCs and from 0.40 to 0.75 for DSM-IV diagnoses. Transition patterns also revealed more stability for LCs with only 21% changing classes compared with 63% of the DSM-IV diagnostic categories. Empirically derived classes of ED symptoms showed greater longitudinal stability than DSM-IV diagnoses over a 2-year time period, suggesting that modifying the criteria to be consistent with empirically based classification (e.g., reducing frequency requirements of binge eating and purging) may reduce ED diagnostic crossover in DSM-5.

  10. Minimal model for spoof acoustoelastic surface states

    DEFF Research Database (Denmark)

    Christensen, Johan; Liang, Z.; Willatzen, Morten

    2014-01-01

    Similar to textured perfect electric conductors for electromagnetic waves sustaining artificial or spoof surface plasmons we present an equivalent phenomena for the case of sound. Aided by a minimal model that is able to capture the complex wave interaction of elastic cavity modes and airborne...... sound radiation in perfect rigid panels, we construct designer acoustoelastic surface waves that are entirely controlled by the geometrical environment. Comparisons to results obtained by full-wave simu- lations confirm the feasibility of the model and we demonstrate illustrative examples...

  11. Classical Belief Conditioning and its Generalization to DSm Theory

    Czech Academy of Sciences Publication Activity Database

    Daniel, Milan

    2008-01-01

    Roč. 2, č. 4 (2008), s. 267-279 ISSN 1752-8917 R&D Projects: GA AV ČR 1ET100300419 Institutional research plan: CEZ:AV0Z10300504 Keywords : belief functions * Dempster-Shafer theory * belief conditioning * DSm theory * overlapping elements * hyper-power set * DSm model Subject RIV: BA - General Mathematics http://www.worldacademicunion.com/journal/jus/jusVol02No4paper04.pdf

  12. Characterizing psychopathy using DSM-5 personality traits.

    Science.gov (United States)

    Strickland, Casey M; Drislane, Laura E; Lucy, Megan; Krueger, Robert F; Patrick, Christopher J

    2013-06-01

    Despite its importance historically and contemporarily, psychopathy is not recognized in the current Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition, Text Revised (DSM-IV-TR). Its closest counterpart, antisocial personality disorder, includes strong representation of behavioral deviance symptoms but weak representation of affective-interpersonal features considered central to psychopathy. The current study evaluated the extent to which psychopathy and its distinctive facets, indexed by the Triarchic Psychopathy Measure, can be assessed effectively using traits from the dimensional model of personality pathology developed for DSM-5, operationalized by the Personality Inventory for DSM-5 (PID-5). Results indicate that (a) facets of psychopathy entailing impulsive externalization and callous aggression are well-represented by traits from the PID-5 considered relevant to antisocial personality disorder, and (b) the boldness facet of psychopathy can be effectively captured using additional PID-5 traits. These findings provide evidence that the dimensional model of personality pathology embodied in the PID-5 provides effective trait-based coverage of psychopathy and its facets.

  13. The Evaluation of Photogrammetry-Based DSM from Low-Cost UAV by LiDAR-Based DSM

    Directory of Open Access Journals (Sweden)

    Mateo Gašparović

    2017-01-01

    Full Text Available Background and Purpose: Unmanned aerial vehicles (UAVs are flexible to solve various surveying tasks which make them useful in many disciplines, including forestry. The main goal of this research is to evaluate the quality of photogrammetry-based digital surface model (DSM from low-cost UAV’s images collected in non-optimal weather (windy and cloudy weather and environmental (inaccessibility for regular spatial distribution of ground control points - GCPs conditions. Materials and Methods: The UAV-based DSMs without (DSMP and with using GCPs (DSMP-GCP were generated. The vertical agreement assessment of the UAV-based DSMs was conducted by comparing elevations of 60 checkpoints of a regular 100 m sampling grid obtained from LiDAR-based DSM (DSML with the elevations of planimetrically corresponding points obtained from DSMP and DSMP-GCP. Due to the non-normal distribution of residuals (vertical differences between UAV- and LiDAR-based DSMs, a vertical agreement was assessed by using robust measures: median, normalised median absolute deviation (NMAD, 68.3% quantile and 95% quantile. Results: As expected, DSMP-GCP shows higher accuracy, i.e. higher vertical agreement with DSML than DSMP. The median, NMAD, 68.3% quantile, 95% quantile and RMSE* (without outliers values for DSMP are 2.23 m, 3.22 m, 4.34 m, 15.04 m and 5.10 m, respectively, whereas for DSMP-GCP amount to -1.33 m, 2.77 m, 0.11 m, 8.15 m and 3.54 m, respectively. Conclusions: The obtained results confirmed great potential of images obtained by low-cost UAV for forestry applications, even if they are surveyed in non-optimal weather and environmental conditions. This could be of importance for cases when urgent UAV surveys are needed (e.g. detection and estimation of forest damage which do not allow careful and longer survey planning. The vertical agreement assessment of UAV-based DSMs with LiDAR-based DSM confirmed the importance of GCPs for image orientation and DSM generation. Namely

  14. Global modelling of Cryptosporidium in surface water

    Science.gov (United States)

    Vermeulen, Lucie; Hofstra, Nynke

    2016-04-01

    Introduction Waterborne pathogens that cause diarrhoea, such as Cryptosporidium, pose a health risk all over the world. In many regions quantitative information on pathogens in surface water is unavailable. Our main objective is to model Cryptosporidium concentrations in surface waters worldwide. We present the GloWPa-Crypto model and use the model in a scenario analysis. A first exploration of global Cryptosporidium emissions to surface waters has been published by Hofstra et al. (2013). Further work has focused on modelling emissions of Cryptosporidium and Rotavirus to surface waters from human sources (Vermeulen et al 2015, Kiulia et al 2015). A global waterborne pathogen model can provide valuable insights by (1) providing quantitative information on pathogen levels in data-sparse regions, (2) identifying pathogen hotspots, (3) enabling future projections under global change scenarios and (4) supporting decision making. Material and Methods GloWPa-Crypto runs on a monthly time step and represents conditions for approximately the year 2010. The spatial resolution is a 0.5 x 0.5 degree latitude x longitude grid for the world. We use livestock maps (http://livestock.geo-wiki.org/) combined with literature estimates to calculate spatially explicit livestock Cryptosporidium emissions. For human Cryptosporidium emissions, we use UN population estimates, the WHO/UNICEF JMP sanitation country data and literature estimates of wastewater treatment. We combine our emissions model with a river routing model and data from the VIC hydrological model (http://vic.readthedocs.org/en/master/) to calculate concentrations in surface water. Cryptosporidium survival during transport depends on UV radiation and water temperature. We explore pathogen emissions and concentrations in 2050 with the new Shared Socio-economic Pathways (SSPs) 1 and 3. These scenarios describe plausible future trends in demographics, economic development and the degree of global integration. Results and

  15. Olkiluoto surface and near-surface hydrological modelling in 2010

    International Nuclear Information System (INIS)

    Karvonen, T.

    2011-08-01

    The modeling approaches carried out with the Olkiluoto surface hydrological model (SHYD) include palaeohydrological evolution of the Olkiluoto Island, examination of the boundary condition at the geosphere-biosphere interface zone, simulations related to infiltration experiment, prediction of the influence of ONKALO on hydraulic head in shallow and deep bedrock and optimisation of the shallow monitoring network. A so called short-term prediction system was developed for continuous updating of the estimated drawdowns caused by ONKALO. The palaeohydrological simulations were computed for a period starting from the time when the highest hills on Olkiluoto Island rose above sea level around 2 500 years ago. The input data needed in the model were produced by the UNTAMO-toolbox. The groundwater flow evolution is primarily driven by the postglacial land uplift and the uncertainty in the land uplift model is the biggest single factor that influences the accuracy of the results. The consistency of the boundary condition at the geosphere-biosphere interface zone (GBIZ) was studied during 2010. The comparison carried out during 2010 showed that pressure head profiles computed with the SHYD model and deep groundwater flow model FEFTRA are in good agreement with each other in the uppermost 100 m of the bedrock. This implies that flux profiles computed with the two approaches are close to each other and hydraulic heads computed at level z=0 m with the SHYD can be used as head boundary condition in the deep groundwater flow model FEFTRA. The surface hydrological model was used to analyse the results of the infiltration experiment. Increase in bedrock recharge inside WCA explains around 60-63 % from the amount of water pumped from OL-KR14 and 37-40 % of the water pumped from OL-KR14 flows towards pumping section via the hydrogeological zones. Pumping from OL-KR14 has only a minor effect on heads and fluxes in zones HZ19A and HZ19C compared to responses caused by leakages into

  16. Vision models for 3D surfaces

    Science.gov (United States)

    Mitra, Sunanda

    1992-11-01

    Different approaches to computational stereo to represent human stereo vision have been developed over the past two decades. The Marr-Poggio theory of human stereo vision is probably the most widely accepted model of the human stereo vision. However, recently developed motion stereo models which use a sequence of images taken by either a moving camera or a moving object provide an alternative method of achieving multi-resolution matching without the use of Laplacian of Gaussian operators. While using image sequences, the baseline between two camera positions for a image pair is changed for the subsequent image pair so as to achieve different resolution for each image pair. Having different baselines also avoids the inherent occlusion problem in stereo vision models. The advantage of using multi-resolution images acquired by camera positioned at different baselines over those acquired by LOG operators is that one does not have to encounter spurious edges often created by zero-crossings in the LOG operated images. Therefore in designing a computer vision system, a motion stereo model is more appropriate than a stereo vision model. However, in some applications where only a stereo pair of images are available, recovery of 3D surfaces of natural scenes are possible in a computationally efficient manner by using cepstrum matching and regularization techniques. Section 2 of this paper describes a motion stereo model using multi-scale cepstrum matching for the detection of disparity between image pairs in a sequence of images and subsequent recovery of 3D surfaces from depth-map obtained by a non convergent triangulation technique. Section 3 presents a 3D surface recovery technique from a stereo pair using cepstrum matching for disparity detection and cubic B-splines for surface smoothing. Section 4 contains the results of 3D surface recovery using both of the techniques mentioned above. Section 5 discusses the merit of 2D cepstrum matching and cubic B

  17. Nuclear surface vibrations in bag models

    International Nuclear Information System (INIS)

    Tomio, L.

    1984-01-01

    The main difficulties found in the hadron bag models are reviewed from the original version of the MIT bag model. Following, with the aim to answer two of the main difficulties in bag models, viz., the parity and the divergence illness, a dynamical model is presented. In the model, the confinement surface of the quarks (bag) is treated like a real physical object which interacts with the quarks and is exposed to vibrations. The model is applied to the nucleon, being observed that his spectrum, in the first excited levels, can be reproduced with resonable precision and obeying to the correct parity order. In the same way that in a similar work of Brown et al., it is observed to be instrumental the inclusion of the effect due to pions. (L.C.) [pt

  18. Liquid surface model for carbon nanotube energetics

    DEFF Research Database (Denmark)

    Solov'yov, Ilia; Mathew, Maneesh; Solov'yov, Andrey V.

    2008-01-01

    In the present paper we developed a model for calculating the energy of single-wall carbon nanotubes of arbitrary chirality. This model, which we call as the liquid surface model, predicts the energy of a nanotube with relative error less than 1% once its chirality and the total number of atoms a...... the calculated energies we determine the elastic properties of the single-wall carbon nanotubes (Young modulus, curvature constant) and perform a comparison with available experimental measurements and earlier theoretical predictions....

  19. Grain Surface Models and Data for Astrochemistry

    Science.gov (United States)

    Cuppen, H. M.; Walsh, C.; Lamberts, T.; Semenov, D.; Garrod, R. T.; Penteado, E. M.; Ioppolo, S.

    2017-10-01

    The cross-disciplinary field of astrochemistry exists to understand the formation, destruction, and survival of molecules in astrophysical environments. Molecules in space are synthesized via a large variety of gas-phase reactions, and reactions on dust-grain surfaces, where the surface acts as a catalyst. A broad consensus has been reached in the astrochemistry community on how to suitably treat gas-phase processes in models, and also on how to present the necessary reaction data in databases; however, no such consensus has yet been reached for grain-surface processes. A team of {˜}25 experts covering observational, laboratory and theoretical (astro)chemistry met in summer of 2014 at the Lorentz Center in Leiden with the aim to provide solutions for this problem and to review the current state-of-the-art of grain surface models, both in terms of technical implementation into models as well as the most up-to-date information available from experiments and chemical computations. This review builds on the results of this workshop and gives an outlook for future directions.

  20. AMMA Land surface Model Intercomparison Project (ALMIP)

    Science.gov (United States)

    Boone, A. A.; Derosnay, P.

    2007-05-01

    Extreme climatic variability has afflicted West Africa over the last half century, which has resulted in significant socio-economic consequences for the people of this region. There is therefore a need to improve seasonal to inter-annual prediction of the West-African monsoon (WAM), however, difficulties modeling the WAM arise from both the paucity of observations at sufficient space-time resolutions, and due to the complex interactions between the biosphere, atmosphere and hydrosphere over this region. In particular, there is evidence that the land surface influences the variability of the WAM over a wide range of spatio-temporal scales. A critical aspect of this coupling is the feedback between the regional atmospheric circulation and the strong meridional surface flux gradients of mass and energy. One of the main goals of the African Monsoon Multi-disciplinary Analysis (AMMA) Project is to obtain a better understanding of the physical processes influencing the West-African Monsoon (WAM) on daily to inter-annual timescales. An improved comprehension of the relevant land surface processes is being addressed through the construction of a multi-scale atmospheric and land surface parameter forcing database using a variety of sources; numerical weather prediction forecast data, remote sensing products and local scale observations. The goal of this database is to drive land surface, vegetation and hydrological models over a range of spatial scales (local to regional) in order to gain better insights into the attendant processes. This goal is being met under the auspices of the AMMA Land surface Model Intercomparison Project (ALMIP). In the recently completed Phase 1 of this project, an ensemble of state-of-the-art land surface schemes have been run in "off-line" mode (i.e. decoupled from an atmospheric model) at a regional scale over western Africa for four annual cycles (2002-5). In this talk, intercomparison results will be presented. In addition, results from a

  1. Modeling superhydrophobic surfaces comprised of random roughness

    Science.gov (United States)

    Samaha, M. A.; Tafreshi, H. Vahedi; Gad-El-Hak, M.

    2011-11-01

    We model the performance of superhydrophobic surfaces comprised of randomly distributed roughness that resembles natural surfaces, or those produced via random deposition of hydrophobic particles. Such a fabrication method is far less expensive than ordered-microstructured fabrication. The present numerical simulations are aimed at improving our understanding of the drag reduction effect and the stability of the air-water interface in terms of the microstructure parameters. For comparison and validation, we have also simulated the flow over superhydrophobic surfaces made up of aligned or staggered microposts for channel flows as well as streamwise or spanwise ridge configurations for pipe flows. The present results are compared with other theoretical and experimental studies. The numerical simulations indicate that the random distribution of surface roughness has a favorable effect on drag reduction, as long as the gas fraction is kept the same. The stability of the meniscus, however, is strongly influenced by the average spacing between the roughness peaks, which needs to be carefully examined before a surface can be recommended for fabrication. Financial support from DARPA, contract number W91CRB-10-1-0003, is acknowledged.

  2. Modeling of ESD events from polymeric surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Pfeifer, Kent Bryant

    2014-03-01

    Transient electrostatic discharge (ESD) events are studied to assemble a predictive model of discharge from polymer surfaces. An analog circuit simulation is produced and its response is compared to various literature sources to explore its capabilities and limitations. Results suggest that polymer ESD events can be predicted to within an order of magnitude. These results compare well to empirical findings from other sources having similar reproducibility.

  3. Parameter optimization for surface flux transport models

    Science.gov (United States)

    Whitbread, T.; Yeates, A. R.; Muñoz-Jaramillo, A.; Petrie, G. J. D.

    2017-11-01

    Accurate prediction of solar activity calls for precise calibration of solar cycle models. Consequently we aim to find optimal parameters for models which describe the physical processes on the solar surface, which in turn act as proxies for what occurs in the interior and provide source terms for coronal models. We use a genetic algorithm to optimize surface flux transport models using National Solar Observatory (NSO) magnetogram data for Solar Cycle 23. This is applied to both a 1D model that inserts new magnetic flux in the form of idealized bipolar magnetic regions, and also to a 2D model that assimilates specific shapes of real active regions. The genetic algorithm searches for parameter sets (meridional flow speed and profile, supergranular diffusivity, initial magnetic field, and radial decay time) that produce the best fit between observed and simulated butterfly diagrams, weighted by a latitude-dependent error structure which reflects uncertainty in observations. Due to the easily adaptable nature of the 2D model, the optimization process is repeated for Cycles 21, 22, and 24 in order to analyse cycle-to-cycle variation of the optimal solution. We find that the ranges and optimal solutions for the various regimes are in reasonable agreement with results from the literature, both theoretical and observational. The optimal meridional flow profiles for each regime are almost entirely within observational bounds determined by magnetic feature tracking, with the 2D model being able to accommodate the mean observed profile more successfully. Differences between models appear to be important in deciding values for the diffusive and decay terms. In like fashion, differences in the behaviours of different solar cycles lead to contrasts in parameters defining the meridional flow and initial field strength.

  4. A NOVEL IMAGE ACQUISITION AND PROCESSING PROCEDURE FOR FAST TUNNEL DSM PRODUCTION

    Directory of Open Access Journals (Sweden)

    R. Roncella

    2012-07-01

    Full Text Available In mining operations the evaluation of the stability condition of the excavated front are critic to ensure a safe and correct planning of the subsequent activities. The procedure currently used to this aim has some shortcomings: safety for the geologist, completeness of data collection and objective documentation of the results. In the last decade it has been shown that the geostructural parameters necessary to the stability analysis can be derived from high resolution digital surface models (DSM of rock faces. With the objective to overcome the limitation of the traditional survey and to minimize data capture times, so reducing delays on mining site operations, a photogrammetric system to generate high resolution DSM of tunnels has been realized. A fast, effective and complete data capture method has been developed and the orientation and restitution phases have been largely automated. The survey operations take no more than required to the traditional ones; no additional topographic measurements other than those available are required. To make the data processing fast and economic our Structure from Motion procedure has been slightly modified to adapt to the peculiar block geometry while, the DSM of the tunnel is created using automatic image correlation techniques. The geomechanical data are sampled on the DSM, by using the acquired images in a GUI and a segmentation procedure to select discontinuity planes. To allow an easier and faster identification of relevant features of the surface of the tunnel, using again an automatic procedure, an orthophoto of the tunnel is produced. A case study where a tunnel section of ca. 130 m has been surveyed is presented.

  5. [Bipolar disorders in DSM-5].

    Science.gov (United States)

    Severus, E; Bauer, M

    2014-05-01

    In spring 2013 the fifth edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM-5) edited by the American Psychiatric Association was published. The DSM-5 has also brought some important changes regarding bipolar disorders. The goal of this manuscript is to review the novelties in DSM-5 and to evaluate the implications of these changes. The diagnostic criteria as well as the additional remarks provided in the running text of DSM-5 were carefully appraised. For the first time diagnostic criteria are provided for disorders which up to now have been considered as subthreshold bipolar disorders. Furthermore, mixed episodes were eliminated and instead a mixed specifier was introduced. An increase in goal-directed activity/energy is now one of the obligatory symptoms for a (hypo)manic episode. Diagnostic guidance is provided as to when a (hypo)manic episode that has developed during treatment with an antidepressant has to be judged to be causally related to antidepressants and when this episode has only occurred coincidentally with antidepressant use. While some of the novelties are clearly useful, e.g. addition of increased goal-directed activity/energy as obligatory symptom for (hypo)manic episodes, this remains to be demonstrated for others, such as the definition of various subthreshold bipolar disorders.

  6. DSM-5: problems and suggestions

    OpenAIRE

    Birgegård, Andreas; Groß, Gaby; de Man Lapidoth, Joakim; Norring, Claes

    2013-01-01

    The upcoming DSM5 will impact clinical work and research substantially, and we here point to a few problems that may have been overlooked. These concern inconsistencies and lack of clarity, and the future “not elsewhere classified” atypical anorexia nervosa category. We propose solutions in the form of working definitions and operationalizations to facilitate clinical implementation as well as streamline research.

  7. DSM Pocket Guidebook: Commercial technologies

    International Nuclear Information System (INIS)

    1992-08-01

    It has been estimated that if electricity were used more efficiently with commercially available end-use technologies, 24%endash 44% of the nation's current demand for electricity could be eliminated. Almost all major electric utilities in the west are investigating such demand-side management (9DSM) opportunities. In some service territories, for example, improved efficiency could soon produce as much power as that from new coal-fired plants and produce it at a lower cost. Even utilities that currently have excess capacity are finding that DSM offers an opportunity to build efficient end-use stock to help them meet their future load shape objectives. Utility DSM programs typically consist of several measures designed to modify the utility's load shape (for example, innovative rate structures, direct utility control of loads, promotion of energy-efficient technologies, and customer education). The coordinated implementation of such measures requires planning, analysis of options, engineering, marketing, monitoring, and other coordination activities (Figure P1). This guidebook addresses one facet of an overall DSM program: selectrion of end-use technologies within the electrical utilities

  8. How environmental costs impact DSM

    International Nuclear Information System (INIS)

    Sim, S.R.

    1991-01-01

    This article examines the impacts of environmental costs of electricity generation into utility planning of demand side management (DSM) programs. The topics include approach and assumptions, overview of spreadsheet approach, results of the analyses, and the application of this approach to other areas of utility management such as new generation projects, sales of new generation capacity, and utility liability and management prudency

  9. DSM-5 changes enhance parent identification of symptoms in adolescents with ADHD.

    Science.gov (United States)

    Sibley, Margaret H; Kuriyan, Aparajita B

    2016-08-30

    This study evaluates the impact of the DSM-5 ADHD symptom wording changes on symptom endorsement among adolescents with ADHD. Parents of adolescents with systematically diagnosed DSM-IV-TR ADHD (N=78) completed counterbalanced DSM-IV-TR and DSM-5 ADHD symptom checklists in a single sitting. General linear models were conducted to evaluate whether the new DSM-5 symptom descriptors influenced the total number of ADHD symptoms and overall ADHD symptom severity endorsed by parents, how demographic factors were associated with noted changes in symptom endorsement when moving to the DSM-5, and which DSM ADHD items displayed notable changes in endorsement rates under the new wording. On average, parents identified 1.15 additional symptoms of ADHD in adolescents when moving from the DSM-IV-TR to the DSM-5. Increased symptom identification was not specific to age, sex, ethnicity, race, or socioeconomic status. Over half of the sample experienced increased symptom endorsement when changing texts (59.0%). Under the new DSM-5 wording, four symptoms had statistically significant endorsement increases (range: 11.2-16.7%): difficulty sustaining attention, easily distracted, difficulty organizing tasks and activities, and does not seem to listen. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  10. Medezeggenschap bij DSM: Limburg 1946-2011

    NARCIS (Netherlands)

    Buitelaar, W.

    2011-01-01

    "Doing Something Meaningful", zo kenmerkte DSM-bestuursvoorzitter Feike Sijbesma de activiteiten van het concern (NRC, 23 februari 2011). Dat geldt in onderstaande terugblik over de periode 1946-2011 evenzeer voor het werk van de medezeggenschappers van DSM Limburg.

  11. Generalization of the Classic Combination Rules to DSm Hyper-Power Sets

    Czech Academy of Sciences Publication Activity Database

    Daniel, Milan

    2006-01-01

    Roč. 20, - (2006), s. 50-64 ISSN 1311-1493 R&D Projects: GA AV ČR 1ET100300419 Institutional research plan: CEZ:AV0Z10300504 Keywords : Dempster-Shafer theory * Dempster's rule * Yager's rule * Dubois-Prade's rule * DSm theory * hyper-power set * DSm model * DSm rule of combination Subject RIV: BA - General Mathematics http://procon.bg/node/1485

  12. Introduction to DSmT for Information Fusion

    CERN Document Server

    Dezert, J; The 7th International Conference on Information Fusion

    2004-01-01

    DSmT (Dezert-Smarandache Theory) is a new alternative to Dempster-Shafer Theory (DST) which: 1) proposes a new mathematical framework for information fusion; 2) incorporates any kind of model (free, hybrid DSm models, and/or Shafer's model) for taking into account any integrity constraints of the fusion problem; 3) combines uncertain, high conflicting, and imprecise sources of evidence with a new rule of combination and overcomes limitations of the Dempster's rule; 4) is adapted to static or dynamic fusion applications represented in terms of belief functions based on the same general formalism.

  13. Voedings- en eetstoornissen in de DSM-5

    NARCIS (Netherlands)

    Hoek, H W; van Elburg, Annemarie

    2014-01-01

    BACKGROUND: In the DSM-5, feeding disorders and eating disorders have been integrated into one single category. AIM: To review the rationale for changes in the criteria for feeding and eating disorders in DSM-5. METHOD: The revised criteria were drafted and formulated by a DSM-5 workgroup. Next,

  14. [Mood disorders in the DSM-5

    NARCIS (Netherlands)

    Spijker, J.; Claes, S.

    2014-01-01

    BACKGROUND: The DSM-5 was published in May, 2013. AIM: To discuss and comment on the important changes that appear in the sections of DSM-5 dealing with mood disorders. METHOD: The DSM-5 chapters on mood disorders are reviewed. RESULTS: Bipolar disorders and depressive disorders are now dealt with

  15. Testing the Construct Validity of Proposed Criteria for "DSM-5" Autism Spectrum Disorder

    Science.gov (United States)

    Mandy, William P. L.; Charman, Tony; Skuse, David H.

    2012-01-01

    Objective: To use confirmatory factor analysis to test the construct validity of the proposed "DSM-5" symptom model of autism spectrum disorder (ASD), in comparison to alternative models, including that described in "DSM-IV-TR." Method: Participants were 708 verbal children and young persons (mean age, 9.5 years) with mild to severe autistic…

  16. Classification of mood disorders in DSM-V and DSM-VI.

    Science.gov (United States)

    Joyce, Peter R

    2008-10-01

    For any diagnostic system to be clinically useful, and go beyond description, it must provide an understanding that informs about aetiology and/or outcome. DSM-III and DSM-IV have provided reliability; the challenge for DSM-V and DSM-VI will be to provide validity. For DSM-V this will not be achieved. Believers in DSM-III and DSM-IV have impeded progress towards a valid classification system, so DSM-V needs to retain continuity with its predecessors to retain reliability and enhance research, but position itself to inform a valid diagnostic system by DSM-VI. This review examines the features of a diagnostic system and summarizes what is really known about mood disorders. The review also questions whether what are called mood disorders are primarily disorders of mood. Finally, it provides suggestions for DSM-VI.

  17. [Specific learning disabilities - from DSM-IV to DSM-5].

    Science.gov (United States)

    Schulte-Körne, Gerd

    2014-09-01

    The publication of the DSM-5 means changes in the classification and recommendations for diagnosis of specific learning disabilities. Dyslexia and dyscalculia have been reintroduced into the DSM. Three specific learning disorders - impairment in reading, impairment in the written expression, and impairment in mathematics, described by subskills - are now part of the DSM-5. Three subcomponents of the reading disorder are expressly differentiated: word reading accuracy, reading rate, and fluency and reading comprehension. Impaired subskills of the specific learning disorder with impairment in written expression are spelling accuracy, grammar and punctuation accuracy, and clarity and organization of written expression. Four subskills are found in the mathematics disorder: number sense, memorization of arithmetic facts, accurate or fluent calculation, and accurate math reasoning. Each impaired academic domain and subskill should be recorded. A description of the severity degree was also included. The diagnosis is based on a variety of methods, including medical history, clinical interview, school report, teacher evaluation, rating scales, and psychometric tests. The IQ discrepancy criterion was abandoned, though that of age or class discrepancy criterion was retained. The application of a discrepancy is recommended by 1 to 2.5 SD. All three specific developmental disorders are common (prevalence 5 %-15 %), occur early during the first years of formal schooling, and persist into adulthood.

  18. Demand-side management (DSM) in the context of China's on-going power sector reform

    International Nuclear Information System (INIS)

    Zhang, Sufang; Jiao, Yiqian; Chen, Wenjun

    2017-01-01

    As an approach to manage power demand-side resources, DSM plays an important role in electric power system. Though DSM was introduced into China in the early 1990s, its benefits have been underutilized. Using literature study, interview methods and three data sources, this paper examines the likely impacts of China's on-going power sector reform on its DSM. It finds that the major constraints to DSM in China are the insufficient and improper market-based DSM mechanism, grid companies’ low motivations for DSM due to their traditional business model, the underdeveloped energy service industry, and electricity end-users’ low motivation for DSM. China's on-going power sector reform will change power transmission and distribution pricing and grid companies’ business model and introduce competition into retail-side. Drawing on these findings, it is concluded that the likely impacts of the new reform on DSM are: governments may attach more importance to DSM; grid companies may have more motivations for DSM investment; electricity end-users’ motivations for DSM may be both enhanced and dampened; electricity retailers’ motivations for DSM may be dampened; demand response application may be enhanced, and more DSM business models may be developed. Finally, policy implications are provided. - Highlights: • Mechanism of and constraints to DSM in China are examined. • China’s on-going power sector reform is overviewed. • DSM is likely to be enhanced under China's on-going power sector reform. • Policy implications are provided.

  19. Surface response model for quasielastic scattering

    International Nuclear Information System (INIS)

    Esbensen, H.

    1987-01-01

    The description of nucleon-nucleus inelastic scattering in terms of single-scattering has been very successful at intermediate energies. Nuclear structure is the most dominant feature at low excitations and forward scattering, and the Distorted Wave Impulse Approximation (DWIA) has been the most useful technique to extract structure information. The conventional DWIA has also been applied to quasielastic scattering. However, this method is very time-consuming at large scattering angles, since many different excitations of different multipolarities contribute to the inelastic cross section. It has therefore been useful to develop an approximate treatment that contains the main physics of quasielastic scattering. In the following the author will try to establish the connection between the DWIA and the much simpler Surface Response Model. The author will give a short description of the Random Phase Approximation that is used to calculate the nuclear response, and illustrate the spin-isospin dependence of the nucleon-nucleon t-matrix interaction, which is used to generate the excitations of the target nucleus. Finally, some of the applications of the surface response model to (p,p'), (p,n) and ( 3 H,t) reactions are reviewed. 19 refs., 5 figs

  20. Bioadhesion to model thermally responsive surfaces

    Science.gov (United States)

    Andrzejewski, Brett Paul

    This dissertation focuses on the characterization of two surfaces: mixed self-assembled monolayers (SAMs) of hexa(ethylene glycol) and alkyl thiolates (mixed SAM) and poly(N-isopropylacrylamide) (PNIPAAm). The synthesis of hexa(ethylene gylcol) alkyl thiol (C11EG 6OH) is presented along with the mass spectrometry and nuclear magnetic resonance results. The gold substrates were imaged prior to SAM formation with atomic force micrscopy (AFM). Average surface roughness of the gold substrate was 0.44 nm, 0.67 nm, 1.65 nm for 15, 25 and 60 nm gold thickness, respectively. The height of the mixed SAM was measured by ellipsometry and varied from 13 to 28°A depending on surface mole fraction of C11EG6OH. The surface mole fraction of C11EG6OH for the mixed SAM was determined by X-ray photoelectron spectroscopy (XPS) with optimal thermal responsive behavior in the range of 0.4 to 0.6. The mixed SAM surface was confirmed to be thermally responsive by contact angle goniometry, 35° at 28°C and ˜55° at 40°C. In addition, the mixed SAM surfaces were confirmed to be thermally responsive for various aqueous mediums by tensiometry. Factors such as oxygen, age, and surface mole fraction and how they affect the thermal responsive of the mixed SAM are discussed. Lastly, rat fibroblasts were grown on the mixed SAM and imaged by phase contrast microscopy to show inhibition of attachment at temperatures below the molecular transition. Qualitative and quantitative measurements of the fibroblast adhesion data are provided that support the hypothesis of the mixed SAM exhibits a dominantly non-fouling molecular conformation at 25°C whereas it exhibits a dominantly fouling molecular conformation at 40°C. The adhesion of six model proteins: bovine serum albumin, collagen, pyruvate kinase, cholera toxin subunit B, ribonuclease, and lysozyme to the model thermally responsive mixed SAM were examined using AFM. All six proteins possessed adhesion to the pure component alkyl thiol, in

  1. Dsm Extraction and Evaluation from GEOEYE-1 Stereo Imagery

    Science.gov (United States)

    Saldaña, M. M.; Aguilar, M. A.; Aguilar, F. J.; Fernández, I.

    2012-07-01

    The newest very high resolution (VHR) commercial satellites, such as GeoEye-1 or WorldView-2, open new possibilities for cartographic applications, orthoimages generation and extraction of Digital Surface Models (DSMs). These DSMs are generated by image matching strategies from VHR satellite stereopairs imagery, reconstructing the 3D surface corresponding to the first surface view of the earth containing both microrelief (buildings, trees and so on) and bare terrain. The main aim of this work is to carry out an accuracy assessment test on the DSMs extracted from a GeoEye-1 stereopair captured in August 2011. A LiDAR derived DSM taken at the same month that the satellite imagery was used as ground truth. The influence of factors such as number of Ground Control Points (GCPs), sensor models tested and the geoid employed to transform the ellipsoid to orthometric heights were going to be evaluated. In this way, different sets of GCPs ranging from 7 to 45, two sensor models and two geoids (EGM96 and EGM08, the last adapted for Spain vertical network by the Spanish's National Geographic Institute) were tested in this work. The photogrammetric software package used was OrthoEngine from PCI Geomatica v. 10.3.2. OrthoEngine implements both sensor models tested: (i) the physical model developed by Toutin (CCRS) and, (ii) the rational function model using rational polynomial coefficients supplied by the vendor and later refined by means of the zero order linear functions (RPC0). When high accurate and well-distributed GCPs were used, the planimetric and vertical accuracies of DSMs generated from the GeoEye-1 Geo stereopair were always better than 0.5 m. Using only 7 GCPs and RPC0, a vertical accuracy around 0.43 m measured as standard deviation was attained. The geoid used by OrthoEngine (EGM96) produced similar results that the EGM08 adapted for Spain vertical network.

  2. Asignaturas pendientes del DSM-5

    OpenAIRE

    Artigas, Josep, 1948-; Paula Pérez, Isabel, 1970-

    2015-01-01

    El presente artículo analiza las críticas generadas a partir de la publicación del Manual diagnóstico y estadístico de los trastornos mentales, quinta edición (DSM-5), ya anunciadas parcialmente durante las últimas fases de su elaboración. Una parte de las críticas se ha centrado en los cambios de los criterios diagnósticos para determinados trastornos y en la incorporación al DSM de nuevas entidades. Sin embargo, otra vertiente crítica va dirigida a la falta de validez de los diagnósticos de...

  3. Paraphilias in the DSM-5.

    Science.gov (United States)

    Beech, Anthony R; Miner, Michael H; Thornton, David

    2016-01-01

    This review summarizes and critically examines the changes in how the Diagnostic and Statistical Manual of Mental Disorders (DSM) characterizes paraphilias. Attention is paid to the diagnostic options that were included in DSM-5, the decision not to include criterion sets for two additional disorders (paraphilic coercive disorder and hypersexual behavior disorder), and the further decision not to modify the diagnosis of pedophilic to pedohebephilic disorder. The three most significant changes are (a) the move to distinguish paraphilias from paraphilic disorders (allowing unusual sexual interests to be studied by researchers but only regarded as disorders when they cause distress or dysfunction), (b) introducing criteria describing paraphilic disorders as being in remission (when they no longer cause distress or dysfunction), and (c) clarifying the relationship between behavior and paraphilias. Concerns are noted about the forensic use of diagnoses and the lack of funding for field trials in this revision of the DSM. Suggestions are given for future directions in order to further research efficacy and clinical diagnosis.

  4. Conceptions of narcissism and the DSM-5 pathological personality traits.

    Science.gov (United States)

    Wright, Aidan G C; Pincus, Aaron L; Thomas, Katherine M; Hopwood, Christopher J; Markon, Kristian E; Krueger, Robert F

    2013-06-01

    The Diagnostic and Statistical Manual of Mental Disorders-Fifth Edition (DSM-5) features two conceptions of Narcissistic Personality Disorder (NPD), one based on the retained DSM-IV's categorical diagnosis and the other based on a model that blends impairments in personality functioning with a specific trait profile intended to recapture DSM-IV NPD. Nevertheless, the broader literature contains a richer array of potential conceptualizations of narcissism, including distinguishable perspectives from psychiatric nosology, clinical observation and theory, and social/personality psychology. This raises questions about the most advantageous pattern of traits to use to reflect various conceptions of narcissistic pathology via the Personality Inventory for the DSM-5 (PID-5). In this study, we examine the associations of the Personality Disorder Questionnaire-Narcissistic Personality Disorder scale, Narcissistic Personality Inventory-16, and the Pathological Narcissism Inventory and the PID-5 dimensions and facets in a large sample (N = 1,653) of undergraduate student participants. Results point to strong associations with PID-5 Antagonism scales across narcissism measures, consistent with the DSM-5's proposed representation of NPD. However, additional notable associations emerged with PID-5 Negative Affectivity and Psychoticism scales when considering more clinically relevant narcissism measures.

  5. Regulatory frameworks for Natural Gas DSM in Canada : exploring design options, influences and characteristics of success

    International Nuclear Information System (INIS)

    Simon, J.

    2005-11-01

    There are 6 natural gas distribution companies in Canada with formal, ratepayer-funded demand side management (DSM) programs. However, the general characteristics and regulatory environment of these companies varies greatly. With the exception of Enbridge Gas and Union Gas, each company is located in a different province, which means that companies face different energy regulations and energy efficiency policies. An introduction to DSM and its regulation in Canada was presented, as well as an overview of common models in Canada, and the general considerations involved in designing a regulatory framework were discussed. Regulatory design options for natural gas demand-side management regulatory frameworks were evaluated. The major factors that influence the frameworks were analyzed, and the characteristics of a successful DSM program were outlined. The research methodology for this paper consisted of telephone interviews with policy-makers, regulators, non-governmental organizations and regulatory affairs personnel from local distribution companies. Results indicated the importance of a clear policy framework that provides direction for DSM designers. The common elements for a successful regulatory framework were considered to be a systems approach to the definition of DSM; clear regulatory rules; a long-term predictable source and level of DSM funding that reflected the maturity of the DSM market; an alignment of government energy policies and DSM regulatory frameworks; and recognition and capturing of the broad range of DSM benefits

  6. Approximating a DSM-5 Diagnosis of PTSD Using DSM-IV Criteria

    Science.gov (United States)

    Rosellini, Anthony J.; Stein, Murray B.; Colpe, Lisa J.; Heeringa, Steven G.; Petukhova, Maria V.; Sampson, Nancy A.; Schoenbaum, Michael; Ursano, Robert J.; Kessler, Ronald C.

    2015-01-01

    Background Diagnostic criteria for DSM-5 posttraumatic stress disorder (PTSD) are in many ways similar to DSM-IV criteria, raising the possibility that it might be possible to closely approximate DSM-5 diagnoses using DSM-IV symptoms. If so, the resulting transformation rules could be used to pool research data based on the two criteria sets. Methods The Pre-Post Deployment Study (PPDS) of the Army Study to Assess Risk and Resilience in Servicemembers (Army STARRS) administered a blended 30-day DSM-IV and DSM-5 PTSD symptom assessment based on the civilian PTSD Checklist for DSM-IV (PCL-C) and the PTSD Checklist for DSM-5 (PCL-5). This assessment was completed by 9,193 soldiers from three US Army Brigade Combat Teams approximately three months after returning from Afghanistan. PCL-C items were used to operationalize conservative and broad approximations of DSM-5 PTSD diagnoses. The operating characteristics of these approximations were examined compared to diagnoses based on actual DSM-5 criteria. Results The estimated 30-day prevalence of DSM-5 PTSD based on conservative (4.3%) and broad (4.7%) approximations of DSM-5 criteria using DSM-IV symptom assessments were similar to estimates based on actual DSM-5 criteria (4.6%). Both approximations had excellent sensitivity (92.6-95.5%), specificity (99.6-99.9%), total classification accuracy (99.4-99.6%), and area under the receiver operating characteristic curve (0.96-0.98). Conclusions DSM-IV symptoms can be used to approximate DSM-5 diagnoses of PTSD among recently-deployed soldiers, making it possible to recode symptom-level data from earlier DSM-IV studies to draw inferences about DSM-5 PTSD. However, replication is needed in broader trauma-exposed samples to evaluate the external validity of this finding. PMID:25845710

  7. Reliability and Hierarchical Structure of DSM-5 Pathological Traits in a Danish Mixed Sample

    DEFF Research Database (Denmark)

    Bo, Sune; Bach, Bo; Mortensen, Erik Lykke

    2016-01-01

    In this study we assessed the DSM-5 trait model in a large Danish sample (n = 1,119) with respect to reliability of the applied Danish version of the Personality Inventory for DSM-5 (PID-5) self-report form by means of internal consistency and item discrimination. In addition, we tested whether...... the five-factor structure of the DSM-5 trait model can be replicated in a Danish independent sample using the PID-5 self-report form. Finally, we examined the hierarchical structure of DSM-5 traits. In terms of internal consistency and item discrimination, the applied PID-5 scales were generally found...... reliable and functional; our data resembled the five-factor structure of previous findings, and we identified a hierarchical structure from one to five factors that was conceptually reasonable and corresponded with existing findings. These results support the new DSM-5 trait model and suggest that it can...

  8. A surface hydrology model for regional vector borne disease models

    Science.gov (United States)

    Tompkins, Adrian; Asare, Ernest; Bomblies, Arne; Amekudzi, Leonard

    2016-04-01

    Small, sun-lit temporary pools that form during the rainy season are important breeding sites for many key mosquito vectors responsible for the transmission of malaria and other diseases. The representation of this surface hydrology in mathematical disease models is challenging, due to their small-scale, dependence on the terrain and the difficulty of setting soil parameters. Here we introduce a model that represents the temporal evolution of the aggregate statistics of breeding sites in a single pond fractional coverage parameter. The model is based on a simple, geometrical assumption concerning the terrain, and accounts for the processes of surface runoff, pond overflow, infiltration and evaporation. Soil moisture, soil properties and large-scale terrain slope are accounted for using a calibration parameter that sets the equivalent catchment fraction. The model is calibrated and then evaluated using in situ pond measurements in Ghana and ultra-high (10m) resolution explicit simulations for a village in Niger. Despite the model's simplicity, it is shown to reproduce the variability and mean of the pond aggregate water coverage well for both locations and validation techniques. Example malaria simulations for Uganda will be shown using this new scheme with a generic calibration setting, evaluated using district malaria case data. Possible methods for implementing regional calibration will be briefly discussed.

  9. The alternative DSM-5 personality disorder traits criterion

    DEFF Research Database (Denmark)

    Bach, Bo; Maples-Keller, Jessica L; Bo, Sune

    2016-01-01

    The fifth edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM-5; American Psychiatric Association, 2013a) offers an alternative model for Personality Disorders (PDs) in Section III, which consists in part of a pathological personality traits criterion measured...... with the Personality Inventory for DSM-5 (PID-5). The PID-5 selfreport instrument currently exists in the original 220-item form, a short 100-item form, and a brief 25-item form. For clinicians and researchers, the choice of a particular PID- 5 form depends on feasibility, but also reliability and validity. The goal...

  10. Re-evaluating DSM-I.

    Science.gov (United States)

    Cooper, R; Blashfield, R K

    2016-02-01

    The DSM-I is currently viewed as a psychoanalytic classification, and therefore unimportant. There are four reasons to challenge the belief that DSM-I was a psychoanalytic system. First, psychoanalysts were a minority on the committee that created DSM-I. Second, psychoanalysts of the time did not use DSM-I. Third, DSM-I was as infused with Kraepelinian concepts as it was with psychoanalytic concepts. Fourth, contemporary writers who commented on DSM-I did not perceive it as psychoanalytic. The first edition of the DSM arose from a blending of concepts from the Statistical Manual for the Use of Hospitals of Mental Diseases, the military psychiatric classifications developed during World War II, and the International Classification of Diseases (6th edition). As a consensual, clinically oriented classification, DSM-I was popular, leading to 20 printings and international recognition. From the perspective inherent in this paper, the continuities between classifications from the first half of the 20th century and the systems developed in the second half (e.g. DSM-III to DSM-5) become more visible.

  11. Potential Nociceptive Regulatory Effect of Probiotic Lactobacillus rhamnosus PB01 (DSM 14870 on Mechanical Sensitivity in Diet-Induced Obesity Model

    Directory of Open Access Journals (Sweden)

    Fereshteh Dardmeh

    2016-01-01

    Full Text Available Treatments for obesity have been shown to reduce pain secondary to weight loss. Intestinal microbiota, as an endogenous factor, influences obesity and pain sensitivity but the effect of oral probiotic supplementation on musculoskeletal pain perception has not been studied systematically. The present study examined the effect of a single daily oral dose (1 × 109 CFU of probiotics (Lactobacillus rhamnosus PB01, DSM14870 supplement on mechanical pain thresholds in behaving diet-induced obese (DIO mice and their normal weight (NW controls. The mice (N=24, 6-week-old male were randomly divided into four groups on either standard or high fat diet with and without probiotic supplementation. Both DIO and NW groups with probiotic supplementation maintained an insignificant weight gain while the control groups gained significant weight (P<0.05. Similarly, both DIO and NW probiotics supplemented groups demonstrated a significantly (P<0.05 lower sensitivity to mechanical stimulation compared to their corresponding control. The results of this study suggest a protective effect of probiotics on nociception circuits, which propose a direct result of the weight reduction or an indirect result of anti-inflammatory properties of the probiotics. Deciphering the exact underlying mechanism of the weight loss and lowering nociception effect of the probiotic applied in this study require further investigation.

  12. [An approach to DSM-5: a breakthrough in psychiatry?].

    Science.gov (United States)

    Heerlein, Andrés L

    2014-01-01

    One of the main problems of current psychiatry is that its diagnostic classification systems are not precise and reliable, they do not help to identify with certainty a specific type of mental disorder and they frequently overlap two or more diagnoses. This may conduce to over diagnosis and overtreatment, which is the main criticism of the DSM system. The American Psychiatric Association (APA) launched recently the DSM-5, the fifth edition of its diagnostic manual, which provides diagnostic criteria for thousands of psychiatrist, psychologist and researchers and who will be using it in the next coming years. DSM-5, like the preceding editions, placed disorders in discrete categories such as bipolar disorder or schizophrenia. The problem is that scientists have been unable to find yet a genetic or neurobiological evidence to support the theory of mental disorders as separate categories. Several authors wanted the latest DSM to move away from the category model towards a new "dimensional approach", where disorders can be measured and mental illnesses overlapping can be reduced. Recent findings supports this new dimensional strategy, suggesting that the disorders are a product of shared risk factors that lead to abnormalities in specific drives, which can be measured and used to place persons on one of several spectra. In some parts the DSM-5 entered changes aiming to achieve a greater objectivity. The door for new changes in each category, dimension or criteria has been opened, favoring an evidence-based development of the future versions. DSM-5 is presented as a "living document" that can be updated easily. However, the category model still remains for many disorders. The future research in psychiatric diagnostic systems requires more genetic-molecular and neurophysiological evidence and more objective multinational field trials, in order to confirm the existence of the new diagnostic entities, spectrums or dimensions. This approach may provide us reliable

  13. MMPI profile of DSM-III borderline personality disorder.

    Science.gov (United States)

    Snyder, S; Pitts, W M; Goodpaster, W A; Sajadi, C; Gustin, Q

    1982-08-01

    The authors compared the MMPI profile of 26 patients with DSM-III borderline personality disorder with than of 19 patients with dysthymic disorder. The clinical scales on which the borderline patients scored highest were psychasthenia and schizophrenia, but discriminant function analyses indicated that the L and F validity scales provided the model that best discriminated between the borderline and dysthymic groups.

  14. Understanding the DSM-5: stasis and change.

    Science.gov (United States)

    Cooper, Rachel

    2018-03-01

    This paper aims to understand the DSM-5 through situating it within the context of the historical development of the DSM series. When one looks at the sets of diagnostic criteria, the DSM-5 is strikingly similar to the DSM-IV. I argue that at this level the DSM has become 'locked-in' and difficult to change. At the same time, at the structural, or conceptual, level there have been radical changes, for example in the definition of 'mental disorder', in the role of theory and of values, and in the abandonment of the multiaxial approach to diagnosis. The way that the DSM-5 was constructed means that the overall conceptual framework of the classification only barely constrains the sets of diagnostic criteria it contains.

  15. Assessment of Pathological Traits in DSM-5 Personality Disorders by the DAPP-BQ: How Do These Traits Relate to the Six Personality Disorder Types of the Alternative Model?

    Science.gov (United States)

    Berghuis, Han; Ingenhoven, Theo J M; van der Heijden, Paul T; Rossi, Gina M P; Schotte, Chris K W

    2017-11-09

    The six personality disorder (PD) types in DSM-5 section III are intended to resemble their DSM-IV/DSM-5 section II PD counterparts, but are now described by the level of personality functioning (criterion A) and an assigned trait profile (criterion B). However, concerns have been raised about the validity of these PD types. The present study examined the continuity between the DSM-IV/DSM-5 section II PDs and the corresponding trait profiles of the six DSM-5 section III PDs in a sample of 350 Dutch psychiatric patients. Facets of the Dimensional Assessment of Personality Pathology-Basic Questionnaire (DAPP-BQ) were presumed as representations (proxies) of the DSM-5 section III traits. Correlational patterns between the DAPP-BQ and the six PDs were consistent with previous research between DAPP-BQ and DSM-IV PDs. Moreover, DAPP-BQ proxies were able to predict the six selected PDs. However, the assigned trait profile for each PD didn't fully match the corresponding PD.

  16. Relating DSM-5 section III personality traits to section II personality disorder diagnoses.

    Science.gov (United States)

    Morey, L C; Benson, K T; Skodol, A E

    2016-02-01

    The DSM-5 Personality and Personality Disorders Work Group formulated a hybrid dimensional/categorical model that represented personality disorders as combinations of core impairments in personality functioning with specific configurations of problematic personality traits. Specific clusters of traits were selected to serve as indicators for six DSM categorical diagnoses to be retained in this system - antisocial, avoidant, borderline, narcissistic, obsessive-compulsive and schizotypal personality disorders. The goal of the current study was to describe the empirical relationships between the DSM-5 section III pathological traits and DSM-IV/DSM-5 section II personality disorder diagnoses. Data were obtained from a sample of 337 clinicians, each of whom rated one of his or her patients on all aspects of the DSM-IV and DSM-5 proposed alternative model. Regression models were constructed to examine trait-disorder relationships, and the incremental validity of core personality dysfunctions (i.e. criterion A features for each disorder) was examined in combination with the specified trait clusters. Findings suggested that the trait assignments specified by the Work Group tended to be substantially associated with corresponding DSM-IV concepts, and the criterion A features provided additional diagnostic information in all but one instance. Although the DSM-5 section III alternative model provided a substantially different taxonomic structure for personality disorders, the associations between this new approach and the traditional personality disorder concepts in DSM-5 section II make it possible to render traditional personality disorder concepts using alternative model traits in combination with core impairments in personality functioning.

  17. RIPPLE: A new model for incompressible flows with free surfaces

    Science.gov (United States)

    Kothe, D. B.; Mjolsness, R. C.

    1991-09-01

    A new free surface flow model, RIPPLE, is summarized. RIPPLE obtains finite difference solutions for incompressible flow problems having strong surface tension forces at free surfaces of arbitrarily complex topology. The key innovation is the Continuum Surface Force (CSF) model which represents surface tension as a (strongly) localized volume force. Other features include a high-order momentum advection model, a volume-of-fluid free surface treatment, and an efficient two-step projection solution method. RIPPLE'S unique capabilities are illustrated with two example problems: low-gravity jet-induced tank flow, and the collision and coalescence of two cylindrical rods.

  18. RIPPLE - A new model for incompressible flows with free surfaces

    Science.gov (United States)

    Kothe, D. B.; Mjolsness, R. C.

    1991-09-01

    A new free surface flow model, RIPPLE, is summarized. RIPPLE obtains finite difference solutions for incompressible flow problems having strong surface tension forces at free surfaces of arbitrarily complex topology. The key innovation is the continuum surface force model which represents surface tension as a (strongly) localized volume force. Other features include a higher-order momentum advection model, a volume-of-fluid free surface treatment, and an efficient two-step projection solution method. RIPPLE's unique capabilities are illustrated with two example problems: low-gravity jet-induced tank flow, and the collision and coalescence of two cylindrical rods.

  19. DSM-III-R and religion.

    Science.gov (United States)

    Post, S G

    1992-07-01

    The interpretation of religion in DSM-III-R contains considerable negative bias and contributes to unfair stereotypes of religious persons. Particularly new religious movements and religious conversion are unfairly interpreted under the DSM-III-R heading, 'Dissociative Disorder Not Otherwise Specified'. It is suggested that a more balanced and respectful interpretation of religion is needed in DSM-III-R, since psychiatry through its official nomenclature should not contribute to social intolerance of religious nonconformity.

  20. Operationalization of diagnostic criteria of DSM-5 somatic symptom disorders.

    Science.gov (United States)

    Xiong, Nana; Zhang, Yaoyin; Wei, Jing; Leonhart, Rainer; Fritzsche, Kurt; Mewes, Ricarda; Hong, Xia; Cao, Jinya; Li, Tao; Jiang, Jing; Zhao, Xudong; Zhang, Lan; Schaefert, Rainer

    2017-11-07

    The aim of this study was to test the operationalization of DSM-5 somatic symptom disorder (SSD) psychological criteria among Chinese general hospital outpatients. This multicenter, cross-sectional study enrolled 491 patients from 10 general hospital outpatient departments. The structured clinical "interview about cognitive, affective, and behavioral features associated with somatic complaints" was used to operationalize the SSD criteria B. For comparison, DSM-IV somatoform disorders were assessed with the Mini International Neuropsychiatric Interview plus. Cohen's к scores were given to illustrate the agreement of the diagnoses. A three-structure model of the interview, within which items were classified as respectively assessing the cognitive (B1), affective (B2), and behavioral (B3) features, was examined. According to percentages of screening-positive persons and the receiver operator characteristic (ROC) analysis, a cut-off point of 2 was recommended for each subscale of the interview. With the operationalization, the frequency of DSM-5 SSD was estimated as 36.5% in our sample, and that of DSM-IV somatoform disorders was 8.2%. The agreement between them was small (Cohen's к = 0.152). Comparisons of sociodemographic features of SSD patients with different severity levels (mild, moderate, severe) showed that mild SSD patients were better-off in terms of financial and employment status, and that the severity subtypes were congruent with the level of depression, anxiety, quality of life impairment, and the frequency of doctor visits. The operationalization of the diagnosis and severity specifications of SSD was valid, but the diagnostic agreement between DSM-5 SSD and DSM-IV somatoform disorders was small. The interpretation the SSD criteria should be made cautiously, so that the diagnosis would not became over-inclusive.

  1. Comment on 'Modelling of surface energies of elemental crystals'

    International Nuclear Information System (INIS)

    Li Jinping; Luo Xiaoguang; Hu Ping; Dong Shanliang

    2009-01-01

    Jiang et al (2004 J. Phys.: Condens. Matter 16 521) present a model based on the traditional broken-bond model for predicting surface energies of elemental crystals. It is found that bias errors can be produced in calculating the coordination numbers of surface atoms, especially in the prediction of high-Miller-index surface energies. (comment)

  2. Patient advocacy and DSM-5.

    Science.gov (United States)

    Stein, Dan J; Phillips, Katharine A

    2013-05-17

    The revision of the Diagnostic and Statistical Manual of Mental Disorders (DSM) provides a useful opportunity to revisit debates about the nature of psychiatric classification. An important debate concerns the involvement of mental health consumers in revisions of the classification. One perspective argues that psychiatric classification is a scientific process undertaken by scientific experts and that including consumers in the revision process is merely pandering to political correctness. A contrasting perspective is that psychiatric classification is a process driven by a range of different values and that the involvement of patients and patient advocates would enhance this process. Here we draw on our experiences with input from the public during the deliberations of the Obsessive Compulsive-Spectrum Disorders subworkgroup of DSM-5, to help make the argument that psychiatric classification does require reasoned debate on a range of different facts and values, and that it is appropriate for scientist experts to review their nosological recommendations in the light of rigorous consideration of patient experience and feedback.

  3. Surface CUrrents from a Diagnostic model (SCUD): Pacific

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The SCUD data product is an estimate of upper-ocean velocities computed from a diagnostic model (Surface CUrrents from a Diagnostic model). This model makes daily...

  4. Surface and near-surface hydrological model of Olkiluoto island

    International Nuclear Information System (INIS)

    Karvonen, T.

    2008-04-01

    The aim of the study was to develop a 3D-model that calculates the overall water balance components of Olkiluoto Island in the present-day condition utilizing the existing extensive data sets available. The model links the unsaturated and saturated soil water in the overburden and groundwater in bedrock to a continuous pressure system. The parameterization of land use and vegetation was done in such a way that the model can later on be used for description of the past evolution of the overburden hydrology at the site and overburden's hydrological evolution in the future. Measured groundwater level in overburden tubes, pressure heads in shallow bedrock holes, snow depth, soil temperature, frost depth and discharge measurements were used in assessing the performance of the models in the calibration period (01.05.2001- 31.12.2005). Computed groundwater level variation can be characterized by variables ΔH MEAS and ΔH COMP , which are the difference between maximum and minimum measured and computed groundwater level value during the calibration period. Average ΔH MEAS for all tubes located in fine-textured till soil was 1.99 m and the corresponding computed value ΔH COMP was 1.83 m. Average ΔH MEAS for all tubes located in sandy till soil was 2.12 m and the corresponding computed value ΔH COMP was 1.93 m. The computed results indicate that in future studies it is necessary to divide the two most important soil types into several subclasses. In the present study the uncertainty and sensitivity analysis was carried out through a parameter uncertainty framework known as GLUE. According to the uncertainty analysis the average yearly runoff was around 175 mm a -1 and 50 % confidence limits were 155 and 195 mm a -1 . Measured average yearly runoff during the calibration period was 190 mm a -1 . Average yearly evapotranspiration estimate was 310 mm a -1 and the 50 % confidence limits were 290 and 330 mm a -1 . Average value for recharge through the bedrock system was 1

  5. Multiwalled Carbon Nanotube Deposition on Model Environmental Surfaces

    Science.gov (United States)

    Deposition of multiwalled carbon nanotubes (MWNTs) on model environmental surfaces was investigated using a quartz crystal microbalance with dissipation monitoring (QCM-D). Deposition behaviors of MWNTs on positively and negatively charged surfaces were in good agreement with Der...

  6. Modeling sea-surface temperature and its variability

    Science.gov (United States)

    Sarachik, E. S.

    1985-01-01

    A brief review is presented of the temporal scales of sea surface temperature variability. Progress in modeling sea surface temperature, and remaining obstacles to the understanding of the variability is discussed.

  7. Surfaces foliated by planar geodesics: a model forcurved wood design

    DEFF Research Database (Denmark)

    Brander, David; Gravesen, Jens

    2017-01-01

    Surfaces foliated by planar geodesics are a natural model for surfaces made from wood strips. We outline how to construct all solutions, and produce non-trivial examples, such as a wood-strip Klein bottle......Surfaces foliated by planar geodesics are a natural model for surfaces made from wood strips. We outline how to construct all solutions, and produce non-trivial examples, such as a wood-strip Klein bottle...

  8. Modelling and simulation of surface water waves

    NARCIS (Netherlands)

    van Groesen, Embrecht W.C.; Westhuis, J.H.

    2002-01-01

    The evolution of waves on the surface of a layer of fluid is governed by non-linear effects from surface deformations and dispersive effects from the interaction with the interior fluid motion. Several simulation tools are described in this paper and compared with real life experiments in large

  9. Handbook of evaluation of utility DSM programs

    Energy Technology Data Exchange (ETDEWEB)

    Hirst, E.; Reed, J. [eds.; Bronfman, B.; Fitzpatrick, G.; Hicks, E.; Hirst, E.; Hoffman, M.; Keating, K.; Michaels, H.; Nadel, S.; Peters, J.; Reed, J.; Saxonis, W.; Schoen, A.; Violette, D.

    1991-12-01

    Program evaluation has become a central issue in the world of utility integrated resource planning. The DSM programs that utilities were operating to meet federal requirements or to improve customer relations are now becoming big business. DSM is being considered an important resource in a utility`s portfolio of options. In the last five years, the amount of money that utilities have invested in DSM has grown exponentially in most regulatory jurisdictions. Market analysts are now talking about DSM being a $30 billion industry by the end of the decade. If the large volume of DSM-program investments was not enough to highlight the importance of evaluation, then the introduction of regulatory incentives has really focused the spotlight. This handbook was developed through a process that involved many of those people who represent the diverse constituencies of DSM-program evaluation. We have come to recognize the many technical disciplines that must be employed to evaluate DSM programs. An analysis might start out based on the principles of utility load research to find out what happened, but a combination of engineering and statistical methods must be used to ``triangulate`` an estimate of what would have happened without the program. The difference, of course, is that elusive but prized result of evaluation: what happened as the direct result of the DSM program. Technical performance of DSM measures is not the sole determinant of the answer, either. We also recognize the importance of such behavioral attributes of DSM as persistence and free ridership. Finally, DSM evaluation is meaningless without attention to planning an approach, communicating results to relevant decision-makers, and focusing as much on the process as the impacts of the program. These topics are all covered in this handbook.

  10. Modelling of energetic molecule-surface interactions

    International Nuclear Information System (INIS)

    Kerford, M.

    2000-09-01

    This thesis contains the results of molecular dynamics simulations of molecule-surface interactions, looking particularly at fullerene molecules and carbon surfaces. Energetic impacts of fullerene molecules on graphite create defect craters. The relationship between the parameters of the impacting molecule and the parameters of the crater axe examined and found to be a function of the energy and velocity of the impacting molecule. Less energetic fullerene molecules can be scattered from a graphite surface and the partitioning of energy after a scattering event is investigated. It is found that a large fraction of the kinetic energy retained after impact is translational energy, with a small fraction of rotational energy and a number of vibrational modes. At impact energies where the surface is not broken and at normal incidence, surface waves axe seen to occur. These waves axe used to develop a method of desorbing molecules from a graphite surface without damage to either the surface or the molecules being desorbed. A number of fullerene molecules are investigated and ways to increase the desorption yield are examined. It is found that this is a successful technique for desorbing large numbers of intact molecules from graphite. This technique could be used for desorbing intact molecules into a gas phase for mass spectrometric analysis. (author)

  11. Model castings with composite surface layer - application

    Directory of Open Access Journals (Sweden)

    J. Szajnar

    2008-10-01

    Full Text Available The paper presents a method of usable properties of surface layers improvement of cast carbon steel 200–450, by put directly in foundingprocess a composite surface layer on the basis of Fe-Cr-C alloy. Technology of composite surface layer guarantee mainly increase inhardness and aberasive wear resistance of cast steel castings on machine elements. This technology can be competition for generallyapplied welding technology (surfacing by welding and thermal spraying. In range of studies was made cast steel test castings withcomposite surface layer, which usability for industrial applications was estimated by criterion of hardness and aberasive wear resistance of type metal-mineral and quality of joint cast steel – (Fe-Cr-C. Based on conducted studies a thesis, that composite surface layer arise from liquid state, was formulated. Moreover, possible is control of composite layer thickness and its hardness by suitable selection of parameters i.e. thickness of insert, pouring temperature and solidification modulus of casting. Possibility of technology application of composite surface layer in manufacture of cast steel slide bush for combined cutter loader is presented.

  12. Cognitive and Adaptive Skills in Toddlers Who Meet Criteria for Autism in DSM-IV but Not DSM-5

    Science.gov (United States)

    Jashar, Dasal Tenzin; Brennan, Laura A.; Barton, Marianne L.; Fein, Deborah

    2016-01-01

    The current study compared adaptive and cognitive skills, and autism severity of toddlers with an autism spectrum disorder (ASD) diagnosis under DSM-IV but not DSM-5 criteria (DSM-IV only group) to those who met autism criteria under both diagnostic systems (DSM-5 group) and to those without ASD (non-ASD group). The toddlers in the DSM-IV only…

  13. DSM-5-classificatie van persoonlijkheidsstoornissen bij ouderen

    NARCIS (Netherlands)

    van Alphen, S P J; Rossi, G; Dierckx, E; Oude Voshaar, R C

    2014-01-01

    BACKGROUND: Although it is generally agreed that personality disorders are an important topic in old-age psychiatry, DSM-5 has paid relatively little attention to older persons affected with this severe mental disorder. AIM: To look closely and carefully at several aspects of the way in which DSM-5

  14. [The DSM-V : An overview].

    Science.gov (United States)

    Loas, G

    The aim of the present article is to present an overview of the recently published 5th version of the DSM. After a brief historic of the different versions of the DSM since the third edition, the main features of the classification were presented followed by the particularities of the fifth version.

  15. [Sexual disorders in the DSM-5].

    Science.gov (United States)

    Goethals, K; Cosyns, P

    2014-01-01

    In DSM-IV-TR, the subject of 'sexual and gender identity disorders' was dealt with in one chapter; in DSM-5, however, the subject is divided into three chapters, namely sexual dysfunctions , gender dysphoria, and paraphilic disorders. To discuss the above-mentioned changes. The one-chapter version in DSM-IV is compared with the three-chapter contribution in DSM-5 and the differing criteria are tested for their clinical utility. There are minor changes in the chapter 'sexual dysfunctions'. The content of the chapters on 'gender dysphoria' and 'paraphilic disorders' differs substantially from the content of the sections on these subjects in DSM-IV. In the section on gender dysphoria the term 'sex' has been replaced by 'gender' and the term 'identity disorder' has been dropped. With regard to paraphilias, a distinction is now made between a paraphilia and a paraphilic disorder. The DSM-5 makes a new distinction between pathology (paraphilic disorder) on the one hand and other unusual or unconventional non-pathological sexual behavior on the other hand. In the DSM-5 the highly relevant clinical concept 'hypersexuality' has still not been incorporated as a separate category. In the DSM-5 many parts of the chapters on sexual disorders have been substantially revised.

  16. A surface diffuse scattering model for the mobility of electrons in surface charge coupled devices

    International Nuclear Information System (INIS)

    Ionescu, M.

    1977-01-01

    An analytical model for the mobility of electrons in surface charge coupled devices is studied on the basis of the results previously obtained, considering a surface diffuse scattering; the importance of the results obtained for a better understanding of the influence of the fringing field in surface charge coupled devices is discussed. (author)

  17. Urban Climate Station Site Selection Through Combined Digital Surface Model and Sun Angle Calculations

    Science.gov (United States)

    Kidd, Chris; Chapman, Lee

    2012-01-01

    Meteorological measurements within urban areas are becoming increasingly important due to the accentuating effects of climate change upon the Urban Heat Island (UHI). However, ensuring that such measurements are representative of the local area is often difficult due to the diversity of the urban environment. The evaluation of sites is important for both new sites and for the relocation of established sites to ensure that long term changes in the meteorological and climatological conditions continue to be faithfully recorded. Site selection is traditionally carried out in the field using both local knowledge and visual inspection. This paper exploits and assesses the use of lidar-derived digital surface models (DSMs) to quantitatively aid the site selection process. This is acheived by combining the DSM with a solar model, first to generate spatial maps of sky view factors and sun-hour potential and second, to generate site-specific views of the horizon. The results show that such a technique is a useful first-step approach to identify key sites that may be further evaluated for the location of meteorological stations within urban areas.

  18. [Anxiety disorders in DSM-5].

    Science.gov (United States)

    Márquez, Miguel

    2014-01-01

    The fifth edition of Diagnostic and Statistical Manual, the DSM-5 appeared officially in May 2013 during the development of the 166th Annual Meetingof the American Psychiatric Association (APA) in San Francisco. The drafting process was long and complex; much of the debate became public so that the expectations were great. And it must be said that the new edition did not disappoint, as many changes were made in relation to their predecessors. In Chapter of Anxiety Disorders, which is reviewed in this article, the changes were significant. Obsessive-compulsive disorder and Stress-related disorders were excluded and new clinical pictures, such as separation anxiety disorder and selective mutism, were included. And took place was the long awaited split between panic disorder and agoraphobia, now two separate disorders.

  19. Assessing the Accuracy of High Resolution Digital Surface Models Computed by PhotoScan® and MicMac® in Sub-Optimal Survey Conditions

    Directory of Open Access Journals (Sweden)

    Marion Jaud

    2016-06-01

    Full Text Available For monitoring purposes and in the context of geomorphological research, Unmanned Aerial Vehicles (UAV appear to be a promising solution to provide multi-temporal Digital Surface Models (DSMs and orthophotographs. There are a variety of photogrammetric software tools available for UAV-based data. The objective of this study is to investigate the level of accuracy that can be achieved using two of these software tools: Agisoft PhotoScan® Pro and an open-source alternative, IGN© MicMac®, in sub-optimal survey conditions (rugged terrain, with a large variety of morphological features covering a range of roughness sizes, poor GPS reception. A set of UAV images has been taken by a hexacopter drone above the Rivière des Remparts, a river on Reunion Island. This site was chosen for its challenging survey conditions: the topography of the study area (i involved constraints on the flight plan; (ii implied errors on some GPS measurements; (iii prevented an optimal distribution of the Ground Control Points (GCPs and; (iv was very complex to reconstruct. Several image processing tests are performed with different scenarios in order to analyze the sensitivity of each software package to different parameters (image quality, numbers of GCPs, etc.. When computing the horizontal and vertical errors within a control region on a set of ground reference targets, both methods provide rather similar results. A precision up to 3–4 cm is achievable with these software packages. The DSM quality is also assessed over the entire study area comparing PhotoScan DSM and MicMac DSM with a Terrestrial Laser Scanner (TLS point cloud. PhotoScan and MicMac DSM are also compared at the scale of particular features. Both software packages provide satisfying results: PhotoScan is more straightforward to use but its source code is not open; MicMac is recommended for experimented users as it is more flexible.

  20. Tree detection in urban regions from aerial imagery and DSM based on local maxima points

    Science.gov (United States)

    Korkmaz, Özgür; Yardımcı ćetin, Yasemin; Yilmaz, Erdal

    2017-05-01

    In this study, we propose an automatic approach for tree detection and classification in registered 3-band aerial images and associated digital surface models (DSM). The tree detection results can be used in 3D city modelling and urban planning. This problem is magnified when trees are in close proximity to each other or other objects such as rooftops in the scenes. This study presents a method for locating individual trees and estimation of crown size based on local maxima from DSM accompanied by color and texture information. For this purpose, segment level classifier trained for 10 classes and classification results are improved by analyzing the class probabilities of neighbour segments. Later, the tree classes under a certain height were eliminated using the Digital Terrain Model (DTM). For the tree classes, local maxima points are obtained and the tree radius estimate is made from the vertical and horizontal height profiles passing through these points. The final tree list containing the centers and radius of the trees is obtained by selecting from the list of tree candidates according to the overlapping and selection parameters. Although the limited number of train sets are used in this study, tree classification and localization results are competitive.

  1. DSM-V from the perspective of the DSM-IV experience.

    Science.gov (United States)

    Walsh, B Timothy

    2007-11-01

    This article provides a brief overview of the development of the diagnostic criteria for eating disorders in DSM-IV. The process by which DSM-IV was developed is reviewed, including perspectives on what constitutes diagnostic validity and clinical utility, and their importance in assessing proposed changes in diagnostic criteria. The question of whether alterations in diagnostic criteria would clearly improve clinical utility was a major consideration in the DSM-IV process. Because of concerns that changes in diagnostic criteria would be disruptive and might entail loss of established knowledge, the DSM-IV Task Force assumed a generally conservative stance vis-à-vis change. The process of developing DSM-V is just beginning, and it is far from clear what alterations in diagnostic criteria for eating disorders will occur. However, the evolution of DSM-IV may provide a useful perspective on the development of DSM-V. (c) 2007 by Wiley Periodicals, Inc.

  2. Hawaii demand-side management resource assessment. Final report: DSM opportunity report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    The Hawaii Demand-Side Management Resource Assessment was the fourth of seven projects in the Hawaii Energy Strategy (HES) program. HES was designed by the Department of Business, Economic Development, and Tourism (DBEDT) to produce an integrated energy strategy for the State of Hawaii. The purpose of Project 4 was to develop a comprehensive assessment of Hawaii`s demand-side management (DSM) resources. To meet this objective, the project was divided into two phases. The first phase included development of a DSM technology database and the identification of Hawaii commercial building characteristics through on-site audits. These Phase 1 products were then used in Phase 2 to identify expected energy impacts from DSM measures in typical residential and commercial buildings in Hawaii. The building energy simulation model DOE-2.1E was utilized to identify the DSM energy impacts. More detailed information on the typical buildings and the DOE-2.1E modeling effort is available in Reference Volume 1, ``Building Prototype Analysis``. In addition to the DOE-2.1E analysis, estimates of residential and commercial sector gas and electric DSM potential for the four counties of Honolulu, Hawaii, Maui, and Kauai through 2014 were forecasted by the new DBEDT DSM Assessment Model. Results from DBEDTs energy forecasting model, ENERGY 2020, were linked with results from DOE-2.1E building energy simulation runs and estimates of DSM measure impacts, costs, lifetime, and anticipated market penetration rates in the DBEDT DSM Model. Through its algorithms, estimates of DSM potential for each forecast year were developed. Using the load shape information from the DOE-2.1E simulation runs, estimates of electric peak demand impacts were developed. 10 figs., 55 tabs.

  3. Clashing Diagnostic Approaches: DSM-ICD versus RDoC

    Science.gov (United States)

    Lilienfeld, Scott O.; Treadway, Michael T.

    2016-01-01

    Since at least the middle of the past century, one overarching model of psychiatric classification, namely, that of the Diagnostic and Statistical Manual of Mental Disorders and International Classification of Diseases (DSM-ICD), has reigned supreme. This DSM-ICD approach embraces an Aristotelian view of mental disorders as largely discrete entities that are characterized by distinctive signs, symptoms, and natural histories. Over the past several years, however, a competing vision, namely, the Research Domain Criteria (RDoC) initiative launched by the National Institute of Mental Health, has emerged in response to accumulating anomalies within the DSM-ICD system. In contrast to DSM-ICD, RDoC embraces a Galilean view of psychopathology as the product of dysfunctions in neural circuitry. RDoC appears to be a valuable endeavor that holds out the long-term promise of an alternative system of mental illness classification. We delineate three sets of pressing challenges – conceptual, methodological, and logistical/pragmatic – that must be addressed for RDoC to realize its scientific potential, and conclude with a call for further research, including investigation of a rapprochement between Aristotelian and Galilean approaches to psychiatric classification. PMID:26845519

  4. Simple model of surface roughness for binary collision sputtering simulations

    International Nuclear Information System (INIS)

    Lindsey, Sloan J.; Hobler, Gerhard; Maciążek, Dawid; Postawa, Zbigniew

    2017-01-01

    Highlights: • A simple model of surface roughness is proposed. • Its key feature is a linearly varying target density at the surface. • The model can be used in 1D/2D/3D Monte Carlo binary collision simulations. • The model fits well experimental glancing incidence sputtering yield data. - Abstract: It has been shown that surface roughness can strongly influence the sputtering yield – especially at glancing incidence angles where the inclusion of surface roughness leads to an increase in sputtering yields. In this work, we propose a simple one-parameter model (the “density gradient model”) which imitates surface roughness effects. In the model, the target’s atomic density is assumed to vary linearly between the actual material density and zero. The layer width is the sole model parameter. The model has been implemented in the binary collision simulator IMSIL and has been evaluated against various geometric surface models for 5 keV Ga ions impinging an amorphous Si target. To aid the construction of a realistic rough surface topography, we have performed MD simulations of sequential 5 keV Ga impacts on an initially crystalline Si target. We show that our new model effectively reproduces the sputtering yield, with only minor variations in the energy and angular distributions of sputtered particles. The success of the density gradient model is attributed to a reduction of the reflection coefficient – leading to increased sputtering yields, similar in effect to surface roughness.

  5. Mathematical modeling of rainwater runoff over catchment surface ...

    African Journals Online (AJOL)

    Mathematical modeling of rainwater runoff over catchment surface and mass transfer of contaminant incoming to water stream from soil. ... rainwater runoff along the surface catchment taking account the transport of pollution which permeates into the water flow from a porous media of soil at the certain areas of this surface.

  6. Modeling laser-induced periodic surface structures: an electromagnetic approach

    NARCIS (Netherlands)

    Skolski, J.Z.P.

    2014-01-01

    This thesis presents and discusses laser-induced periodic surface structures (LIPSSs), as well as a model explaining their formation. LIPSSs are regular wavy surface structures with dimensions usually in the submicrometer range, which can develop on the surface of many materials exposed to laser

  7. Prevalence and correlates of DSM-5 eating disorders in patients with bipolar disorder.

    Science.gov (United States)

    McElroy, Susan L; Crow, Scott; Blom, Thomas J; Biernacka, Joanna M; Winham, Stacey J; Geske, Jennifer; Cuellar-Barboza, Alfredo B; Bobo, William V; Prieto, Miguel L; Veldic, Marin; Mori, Nicole; Seymour, Lisa R; Bond, David J; Frye, Mark A

    2016-02-01

    To determine prevalence rates and clinical correlates of current DSM-5 eating disorders in patients with bipolar disorder (BP). Prevalence rates of current DSM-5- and DSM-IV-defined binge eating disorder (BED), bulimia nervosa (BN), and anorexia nervosa (AN) were assessed with the Eating Disorder Diagnostic Scale (EDDS) in 1092 patients with BP. Psychiatric illness burden was evaluated with five proxy measures of BP illness severity. Medical illness burden was evaluated with the Cumulative Index Rating Scale (CIRS). Twenty-seven percent of patients had a current DSM-5 eating disorder: 12% had BED, 15% had BN, and 0.2% had AN. Rates of DSM-5-defined BED and BN were higher than clinical diagnosis rates and rates of DSM-IV-defined BED and BN. Compared with BP patients without an eating disorder, BP patients with a DSM-5 eating disorder were younger and more likely to be women; had an earlier age of onset of BP; had higher EDDS composite scores and higher degrees of suicidality, mood instability, and anxiety disorder comorbidity; and had a higher mean BMI, higher rate of obesity, and higher CIRS total scores. In a logistic regression model controlling for previously identified correlates of an eating disorder, younger age, female gender, and higher BMI remained significantly associated with an eating disorder. The EDDS has not been validated in BP patients. DSM-5-defined BED and BN are common in BP patients, possibly more common than DSM-IV-defined BED and BN, and associated with greater psychiatric and general medical illness burden. Further studies assessing DSM-5 eating disorders in people with BP are greatly needed. Copyright © 2015 Elsevier B.V. All rights reserved.

  8. The psychometric properties of the personality inventory for DSM-5 in an APA DSM-5 field trial sample.

    Science.gov (United States)

    Quilty, Lena C; Ayearst, Lindsay; Chmielewski, Michael; Pollock, Bruce G; Bagby, R Michael

    2013-06-01

    Section 3 of the fifth edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM-5) includes a hybrid model of personality pathology, in which dimensional personality traits are used to derive one of seven categorical personality disorder diagnoses. The Personality Inventory for DSM-5 (PID-5) was developed by the DSM-5 Personality and Personality Disorders workgroup and their consultants to produce a freely available instrument to assess the personality traits within this new system. To date, the psychometric properties of the PID-5 have been evaluated primarily in undergraduate student and community adult samples. In the current investigation, we extend this line of research to a psychiatric patient sample who participated in the APA DSM-5 Field Trial (Centre for Addiction and Mental Health site). A total of 201 psychiatric patients (102 men, 99 women) completed the PID-5 and the Revised NEO Personality Inventory (NEO PI-R). The internal consistencies of the PID-5 domain and facet trait scales were acceptable. Results supported the unidimensional structure of all trait scales but one, and the convergence between the PID-5 and analogous NEO PI-R scales. Evidence for discriminant validity was mixed. Overall, the current investigation provides support for the psychometric properties of this diagnostic instrument in psychiatric samples.

  9. Borderline Personality Disorder and Personality Inventory for DSM-5 (PID-5): Dimensional personality assessment with DSM-5.

    Science.gov (United States)

    Calvo, Natalia; Valero, Sergi; Sáez-Francàs, Naia; Gutiérrez, Fernando; Casas, Miguel; Ferrer, Marc

    2016-10-01

    Borderline personality disorder (BPD) diagnosis has been considered highly controversial. The Diagnostic and Statistical Manual of Mental Disorders 5th edition (DSM-5) proposes an alternative hybrid diagnostic model for personality disorders (PD), and the Personality Inventory for DSM-5 (PID-5) has adequate psychometric properties and has been widely used for the assessment of the dimensional component. Our aim was to analyze the utility of the personality traits presented in Section III of the DSM-5 for BPD diagnosis in an outpatient clinical sample, using the Spanish version of the PID-5. Two clinical samples were studied: BPD sample (n=84) and non-BPD sample (n=45). Between-sample differences in PID-5 scores were analyzed. The BPD sample obtained significantly higher scores in most PID-5 trait facets and domains. Specifically and after regression logistic analyses, in BPD patients, the domains of Negative Affectivity and Disinhibition, and the trait facets of emotional lability, [lack of] restricted affectivity, and impulsivity were more significantly associated with BPD. Although our findings are only partially consistent with the algorithm proposed by DSM-5, we consider that the combination of the PID-5 trait domains and facets could be useful for BPD dimensional diagnosis, and could further our understanding of BPD diagnosis complexity. Copyright © 2016 Elsevier Inc. All rights reserved.

  10. Methanol Oxidation on Model Elemental and Bimetallic Transition Metal Surfaces

    DEFF Research Database (Denmark)

    Tritsaris, G. A.; Rossmeisl, J.

    2012-01-01

    Direct methanol fuel cells are a key enabling technology for clean energy conversion. Using density functional theory calculations, we study the methanol oxidation reaction on model electrodes. We discuss trends in reactivity for a set of monometallic and bimetallic transition metal surfaces, flat...... sites on the surface and to screen for novel bimetallic surfaces of enhanced activity. We suggest platinum copper surfaces as promising anode catalysts for direct methanol fuel cells....

  11. Sediment Transport Model for a Surface Irrigation System

    OpenAIRE

    Mailapalli, Damodhara R.; Raghuwanshi, Narendra S.; Singh, Rajendra

    2013-01-01

    Controlling irrigation-induced soil erosion is one of the important issues of irrigation management and surface water impairment. Irrigation models are useful in managing the irrigation and the associated ill effects on agricultural environment. In this paper, a physically based surface irrigation model was developed to predict sediment transport in irrigated furrows by integrating an irrigation hydraulic model with a quasi-steady state sediment transport model to predict sediment load in fur...

  12. Towards a Revised Monte Carlo Neutral Particle Surface Interaction Model

    International Nuclear Information System (INIS)

    Stotler, D.P.

    2005-01-01

    The components of the neutral- and plasma-surface interaction model used in the Monte Carlo neutral transport code DEGAS 2 are reviewed. The idealized surfaces and processes handled by that model are inadequate for accurately simulating neutral transport behavior in present day and future fusion devices. We identify some of the physical processes missing from the model, such as mixed materials and implanted hydrogen, and make some suggestions for improving the model

  13. A model of the ideal molecular surface

    Science.gov (United States)

    Henson, Bryan; Smilowitz, Laura

    2014-03-01

    We utilize two manifestations of the phenomena of the quasiliquid phase on the surface of molecular crystals to formulate a universal thermodynamic theory describing the thickness of the layer as a function of the liquid phase activity. We use direct measurements of the liquid thickness as a function of temperature and measurements of the acceleration of thermal decomposition as a function of temperature approaching the melting point to illustrate the mechanism. We show that given the existence of a liquid phase below the melting point the ideal liquid activity is necessarily a fixed function of the free energies of sublimation and vaporization. We use this activity to create a reduced formula for the liquid thickness generally applicable to the molecular surface. We provide a prediction of the mechanism and kinetics of quasiliquid formation and show that the phase exists as a metastable kinetic steady state. We show that to first order the principle controlling feature of the system is the configurational entropy of the liquid/solid interface, rather than the specifics of the surface potential energy. This is analogous to other bulk colligative phenomena such as ideal gas and solution theories, and is thus an ideal, universal formulation of inherent, thermodynamically driven, surface disorder.

  14. Surface aerodynamic temperature modeling over rainfed cotton

    Science.gov (United States)

    Evapotranspiration (ET) or latent heat flux (LE) can be spatially estimated as an energy balance (EB) residual for land surfaces using remote sensing inputs. The EB equation requires the estimation of net radiation (Rn), soil heat flux (G), and sensible heat flux (H). Rn and G can be estimated with ...

  15. Deriving ICD-11 personality disorder domains from dsm-5 traits

    DEFF Research Database (Denmark)

    Bach, B; Sellbom, M; Kongerslev, M

    2017-01-01

    OBJECTIVE: The personality disorder domains proposed for the ICD-11 comprise Negative Affectivity, Detachment, Dissociality, Disinhibition, and Anankastia, which are reasonably concordant with the higher-order trait domains in the Alternative DSM-5 Model for Personality Disorders. METHOD: We...... in the proposed ICD-11 five-domain structure as well as other recognizable higher-order models of personality and psychopathology. Model fits revealed that the five proposed ICD-11 personality disorder domains were satisfactorily resembled, and replicated in the independent US sample. CONCLUSION: The proposed ICD......-11 personality disorder domains can be accurately described using designated traits from the DSM-5 personality trait system. A scoring algorithm for the ICD-11 personality disorder domains is provided in appendix....

  16. Model for the Evolving Bed Surface around an Offshore Monopile

    DEFF Research Database (Denmark)

    Hartvig, Peres Akrawi

    2012-01-01

    This paper presents a model for the bed surface around an offshore monopile. The model has been designed from measured laboratory bed surfaces and is shown to reproduce these satisfactorily for both scouring and backfilling. The local rate of the bed elevation is assumed to satisfy a certain gene...

  17. Modeling the Soul Surface Seal from a Filtration Perspective

    OpenAIRE

    N.M. Somaratne; K.R.J. Smettem

    1998-01-01

    A physically based model of soil surface scaling is proposed. The governing equations are formulated on the principle of conservation of mass assuming Darcy's law applies to suspension flowing through the soil surface. The model incorporates the physics of surface sealing by mechanisms that capture suspended particles moving with infiltrating water. As a result of particle retention in the soil system, the intrinsic porosity is reduced and hulk density is increased, resulting in changes to so...

  18. Estimates of surface methane emissions over Europe using observed surface concentrations and the FLEXPART trajectory model

    Science.gov (United States)

    Weaver, C. J.; Kiemle, C.; Kawa, S. R.; Aalto, T.; Necki, J.; Steinbacher, M.; Arduini, J.; Apadula, F.; Berkhout, H.; Hatakka, J.; O'Doherty, S.

    2013-12-01

    We use surface methane observations from nine European ground stations, and the FLEXPART Lagrangian transport model to obtain surface methane emissions for 2010. Our inversion shows the strongest emissions from the Netherlands and the coal mines in Upper Silesia Poland. This is qualitatively consistent with the EDGAR surface flux inventory. We also report significant surface fluxes from wetlands in southern Finland during July and August and reduced wetland fluxes later in the year. Our simulated methane surface concentration captures at least half of the daily variability in the observations, suggesting that the transport model is correctly simulating the regional transport pathways over Europe. We also use our trajectory model to determine whether future space-based remote sensing instruments (MERLIN) will be able to detect both natural and anthropogenic changes in the surface flux strengths.

  19. Current viewpoints on DSM-5 in Japan.

    Science.gov (United States)

    Kuroki, Toshihide; Ishitobi, Makoto; Kamio, Yoko; Sugihara, Genichi; Murai, Toshiya; Motomura, Keisuke; Ogasawara, Kazuyoshi; Kimura, Hiroyuki; Aleksic, Branko; Ozaki, Norio; Nakao, Tomohiro; Yamada, Kazuo; Yoshiuchi, Kazuhiro; Kiriike, Nobuo; Ishikawa, Toshio; Kubo, Chiharu; Matsunaga, Chiaki; Miyata, Hisatsugu; Asada, Takashi; Kanba, Shigenobu

    2016-09-01

    The fifth edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM-5) was published in 2013, and its official Japanese version was published in 2014. The Japanese Government uses classifications from the 10th revision of the I nternational C lassification of D iseases (ICD-10) to categorize disorders and determine treatment fees. However, since the publication of the DSM-III, the use of the DSM system has become prevalent in research and educational settings in Japan. In addition to traditional psychiatry, both the ICD and the DSM are taught by many Japanese medical schools, and virtually all clinical research and trials refer to the DSM to define targeted disorders. Amid the current backdrop in which the reputation of the DSM-5 is being established, the editorial board of P sychiatry and C linical N eurosciences has asked Japanese experts across 12 specialties to examine the structure of the DSM-5, including the following categories: Neurodevelopmental Disorders, Schizophrenia Spectrum Disorders, Major Depression, Bipolar Disorders, Obsessive-Compulsive Disorders, Somatic Symptom Disorder, Eating Disorders, Substance-Related and Addictive Disorders, Gender Dysphoria, and Neurocognitive Disorders. Although opinions were only obtained from these selected experts, we believe that we have succeeded, to a certain extent, in presenting views that are representative of each specialty. © 2016 The Authors. Psychiatry and Clinical Neurosciences © 2016 Japanese Society of Psychiatry and Neurology.

  20. The DSM-5: Classification and criteria changes

    Science.gov (United States)

    Regier, Darrel A; Kuhl, Emily A; Kupfer, David J

    2013-01-01

    The Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition (DSM-5) marks the first significant revision of the publication since the DSM-IV in 1994. Changes to the DSM were largely informed by advancements in neuroscience, clinical and public health need, and identified problems with the classification system and criteria put forth in the DSM-IV. Much of the decision-making was also driven by a desire to ensure better alignment with the International Classification of Diseases and its upcoming 11th edition (ICD-11). In this paper, we describe select revisions in the DSM-5, with an emphasis on changes projected to have the greatest clinical impact and those that demonstrate efforts to enhance international compatibility, including integration of cultural context with diagnostic criteria and changes that facilitate DSM-ICD harmonization. It is anticipated that this collaborative spirit between the American Psychiatric Association (APA) and the World Health Organization (WHO) will continue as the DSM-5 is updated further, bringing the field of psychiatry even closer to a singular, cohesive nosology. PMID:23737408

  1. DSM 5: Precedents, present and prospects

    Directory of Open Access Journals (Sweden)

    Jordi E. Obiols

    2012-01-01

    Full Text Available La próxima edición del DSM (DSM 5 aparecerá en Mayo de 2013. Los borradores publicados ya han generado diversas polémicas. Se ha criticado la posible inflación diagnóstica con una previsible epidemia de falsos positivos en nuevos diagnósticos como el "síndrome psicótico atenuado". La propuesta de otros nuevos diagnósticos como el «trastorno cognitivo leve", el "trastorno por atracones" o las "adicciones conductuales", entre otros, se suman a esta polémica. También se han criticado ciertos aspectos metodológicos del proceso, como la exigencia de confidencialidad y la falta de transparencia y los conflictos de intereses. El artículo repasa los antecedentes históricos del proceso DSM, con la revolución en la fiabilidad diagnóstica del DSM-III, los problemas de validez del DSM IV y las dudas que genera el DSM 5 en el supuesto cambio de "paradigma dimensional". Asimismo, se apunta a posibles vías futuras de solución, más allá del DSM 5, en el avance de las ciencias básicas del cerebro y de la conducta.

  2. Modeling wind adjustment factor and midflame wind speed for Rothermel's surface fire spread model

    Science.gov (United States)

    Patricia L. Andrews

    2012-01-01

    Rothermel's surface fire spread model was developed to use a value for the wind speed that affects surface fire, called midflame wind speed. Models have been developed to adjust 20-ft wind speed to midflame wind speed for sheltered and unsheltered surface fuel. In this report, Wind Adjustment Factor (WAF) model equations are given, and the BehavePlus fire modeling...

  3. Olkiluoto surface hydrological modelling: Update 2012 including salt transport modelling

    International Nuclear Information System (INIS)

    Karvonen, T.

    2013-11-01

    Posiva Oy is responsible for implementing a final disposal program for spent nuclear fuel of its owners Teollisuuden Voima Oyj and Fortum Power and Heat Oy. The spent nuclear fuel is planned to be disposed at a depth of about 400-450 meters in the crystalline bedrock at the Olkiluoto site. Leakages located at or close to spent fuel repository may give rise to the upconing of deep highly saline groundwater and this is a concern with regard to the performance of the tunnel backfill material after the closure of the tunnels. Therefore a salt transport sub-model was added to the Olkiluoto surface hydrological model (SHYD). The other improvements include update of the particle tracking algorithm and possibility to estimate the influence of open drillholes in a case where overpressure in inflatable packers decreases causing a hydraulic short-circuit between hydrogeological zones HZ19 and HZ20 along the drillhole. Four new hydrogeological zones HZ056, HZ146, BFZ100 and HZ039 were added to the model. In addition, zones HZ20A and HZ20B intersect with each other in the new structure model, which influences salinity upconing caused by leakages in shafts. The aim of the modelling of long-term influence of ONKALO, shafts and repository tunnels provide computational results that can be used to suggest limits for allowed leakages. The model input data included all the existing leakages into ONKALO (35-38 l/min) and shafts in the present day conditions. The influence of shafts was computed using eight different values for total shaft leakage: 5, 11, 20, 30, 40, 50, 60 and 70 l/min. The selection of the leakage criteria for shafts was influenced by the fact that upconing of saline water increases TDS-values close to the repository areas although HZ20B does not intersect any deposition tunnels. The total limit for all leakages was suggested to be 120 l/min. The limit for HZ20 zones was proposed to be 40 l/min: about 5 l/min the present day leakages to access tunnel, 25 l/min from

  4. Predictive model for ice formation on superhydrophobic surfaces.

    Science.gov (United States)

    Bahadur, Vaibhav; Mishchenko, Lidiya; Hatton, Benjamin; Taylor, J Ashley; Aizenberg, Joanna; Krupenkin, Tom

    2011-12-06

    The prevention and control of ice accumulation has important applications in aviation, building construction, and energy conversion devices. One area of active research concerns the use of superhydrophobic surfaces for preventing ice formation. The present work develops a physics-based modeling framework to predict ice formation on cooled superhydrophobic surfaces resulting from the impact of supercooled water droplets. This modeling approach analyzes the multiple phenomena influencing ice formation on superhydrophobic surfaces through the development of submodels describing droplet impact dynamics, heat transfer, and heterogeneous ice nucleation. These models are then integrated together to achieve a comprehensive understanding of ice formation upon impact of liquid droplets at freezing conditions. The accuracy of this model is validated by its successful prediction of the experimental findings that demonstrate that superhydrophobic surfaces can fully prevent the freezing of impacting water droplets down to surface temperatures of as low as -20 to -25 °C. The model can be used to study the influence of surface morphology, surface chemistry, and fluid and thermal properties on dynamic ice formation and identify parameters critical to achieving icephobic surfaces. The framework of the present work is the first detailed modeling tool developed for the design and analysis of surfaces for various ice prevention/reduction strategies. © 2011 American Chemical Society

  5. Surface potential modeling and reconstruction in Kelvin probe force microscopy.

    Science.gov (United States)

    Xu, Jie; Wu, Yangqing; Li, Wei; Xu, Jun

    2017-09-08

    Kelvin probe force microscopy (KPFM) measurement has been extensively applied in metallic, semiconductor and organic electronic or photovoltaic devices, to characterize the local contact potential difference or surface potential of the samples at the nanoscale. Here, a comprehensive modeling of surface potential in KPFM is established, from the well-known single capacitance model to a precise electrodynamic model, considering the long range property of the electrostatic force in KPFM. The limitations and relations of different models are also discussed. Besides, the feedback condition of the KPFM system is reconsidered and modified, showing that the influence of the cantilever has been overestimated by about 20% in previous reports. Afterwards, the surface potential of charged Si-nanocrystals is reconstructed based on the electrodynamic model, and the calculated surface charge density is very consistent with the macroscopic capacitance-voltage (C-V) measurement. A deep understanding and correct reconstruction of surface potential is crucial to the quantitative analysis of KPFM results.

  6. Examining DSM criteria for trichotillomania in a dimensional framework: implications for DSM-5 and diagnostic practice.

    Science.gov (United States)

    Houghton, David C; Balsis, Steve; Stein, Dan J; Compton, Scott N; Twohig, Michael P; Saunders, Stephen M; Franklin, Martin E; Neal-Barnett, Angela M; Woods, Douglas W

    2015-07-01

    Diagnosis of trichotillomania (TTM) requires meeting several criteria that aim to embody the core pathology of the disorder. These criteria are traditionally interpreted monothetically, in that they are all equally necessary for diagnosis. Alternatively, a dimensional conceptualization of psychopathology allows for examination of the relatedness of each criterion to the TTM latent continuum. First, to examine the ability of recently removed criteria (B and C) to identify the latent dimensions of TTM psychopathology, such that they discriminate between individuals with low and high degrees of hair pulling severity. Second, to determine the impact of removing criteria B and C on the information content of remaining diagnostic criteria. Third, to determine the psychometric properties of remaining TTM diagnostic criteria that remain largely unchanged in DSM-5; that is, whether they measure distinct or overlapping levels of TTM psychopathology. Fourth, to determine whether information content derived from diagnostic criteria aid in the prediction of disease trajectory (i.e., can relapse propensity be predicted from criteria endorsement patterns). Statistics derived from item response theory were used to examine diagnostic criteria endorsement in 91 adults with TTM who underwent psychotherapy. The removal of two criteria in DSM-5 and psychometric validity of remaining criteria was supported. Additionally, individual trait parameters were used to predict treatment progress, uncovering predictive power where none previously existed. Diagnostic criteria for TTM should be examined in dimensional models, which allow for nuanced and sensitive measurement of core symptomology in treatment contexts. Copyright © 2015 Elsevier Inc. All rights reserved.

  7. Vertical Accuracy Assessment of ZY-3 Digital Surface Model Using Icesat/glas Laser Altimeter Data

    Science.gov (United States)

    Li, G.; Tang, X.; Yuan, X.; Zhou, P.; Hu, F.

    2017-05-01

    The Ziyuan-3 (ZY-3) satellite, as the first civilian high resolution surveying and mapping satellite in China, has a very important role in national 1 : 50,000 stereo mapping project. High accuracy digital surface Model (DSMs) can be generated from the three line-array images of ZY-3, and ZY-3 DSMs of China can be produced without using any ground control points (GCPs) by selecting SRTM (Shuttle Radar Topography Mission) and ICESat/GLAS (Ice, Cloud, and land Elevation Satellite, Geo-science Laser Altimeter System) as the datum reference in the Satellite Surveying and Mapping Application Center, which is the key institute that manages and distributes ZY-3 products. To conduct the vertical accuracy evaluation of ZY-3 DSMs of China, three representative regions were chosen and the results were compared to ICESat/GLAS data. The experimental results demonstrated that the root mean square error (RMSE) elevation accuracy of the ZY-3 DSMs was better than 5.0 m, and it even reached to less than 2.5 m in the second region of eastern China. While this work presents preliminary results, it is an important reference for expanding the application of ZY-3 satellite imagery to widespread regions. And the satellite laser altimetry data can be used as referenced data for wide-area DSM evaluation.

  8. VERTICAL ACCURACY ASSESSMENT OF ZY-3 DIGITAL SURFACE MODEL USING ICESAT/GLAS LASER ALTIMETER DATA

    Directory of Open Access Journals (Sweden)

    G. Li

    2017-05-01

    Full Text Available The Ziyuan-3 (ZY-3 satellite, as the first civilian high resolution surveying and mapping satellite in China, has a very important role in national 1 : 50,000 stereo mapping project. High accuracy digital surface Model (DSMs can be generated from the three line-array images of ZY-3, and ZY-3 DSMs of China can be produced without using any ground control points (GCPs by selecting SRTM (Shuttle Radar Topography Mission and ICESat/GLAS (Ice, Cloud, and land Elevation Satellite, Geo-science Laser Altimeter System as the datum reference in the Satellite Surveying and Mapping Application Center, which is the key institute that manages and distributes ZY-3 products. To conduct the vertical accuracy evaluation of ZY-3 DSMs of China, three representative regions were chosen and the results were compared to ICESat/GLAS data. The experimental results demonstrated that the root mean square error (RMSE elevation accuracy of the ZY-3 DSMs was better than 5.0 m, and it even reached to less than 2.5 m in the second region of eastern China. While this work presents preliminary results, it is an important reference for expanding the application of ZY-3 satellite imagery to widespread regions. And the satellite laser altimetry data can be used as referenced data for wide-area DSM evaluation.

  9. Unmanned Aerial Systems and DSM matching for rock glacier monitoring

    Science.gov (United States)

    Dall'Asta, Elisa; Forlani, Gianfranco; Roncella, Riccardo; Santise, Marina; Diotri, Fabrizio; Morra di Cella, Umberto

    2017-05-01

    Among other techniques, aerial and terrestrial photogrammetry have long been used to control the displacements of landslides and glaciers as well as for the detection of terrain morphological changes. Unmanned Aerial Systems (UAS) are today an efficient tool to perform data acquisition in rough or difficult terrain, both safely and quickly, avoiding hazards and risks for the operators while at the same time containing the survey costs. Since 2012 ARPAVdA (the Regional Environmental Protection Agency of Aosta Valley, Italy) periodically surveys with UAS photogrammetry the Gran Sometta rock glacier, the Agency main monitoring site for the climate change impacts on high-mountain areas and related infrastructures. A Digital Surface Model (DSM) and an orthophoto of the rock glacier are produced after each survey flight. In order to accurately georeference them in a stable reference system, a Global Navigation Satellite System (GNSS) campaign is carried out at each epoch, to update the coordinates of signalised Ground Control Points (GCPs), since they partly lay in unstable (moving) areas. In late August 2015 a survey flight has been executed with a senseFly eBee RTK, with differential corrections sent from a ground reference station. The block has been adjusted without GCP using, as control information, only the projection centres coordinates encoded in the images. The RMS of the differences found on twelve Check Points were about 4 cm in horizontal and 7 cm in elevation, i.e. practically the same accuracy found using GCP. Differences between the DSMs produced at the same epoch with block orientation performed with GCP and with GNSS-determined projection centres were also investigated. To evaluate the rock glacier displacement fields between two epochs, corresponding features were at first manually identified on the orthophotos by a trained operator. To avoid the manual time-consuming procedure and increase the density of displacement information, two automatic

  10. Should the DSM V drop Asperger syndrome?

    Science.gov (United States)

    Ghaziuddin, Mohammad

    2010-09-01

    The DSM IV defines Asperger syndrome (AS) as a pervasive developmental (autistic spectrum) disorder characterized by social deficits and rigid focused interests in the absence of language impairment and cognitive delay. Since its inclusion in the DSM-IV, there has been a dramatic increase in its recognition both in children and adults. However, because studies have generally failed to demonstrate a clear distinction between AS and autism, some researchers have called for its elimination from the forthcoming DSM V. This report argues for a modification of its diagnostic criteria and its continued retention in the diagnostic manual.

  11. Modeling noncontact atomic force microscopy resolution on corrugated surfaces

    Directory of Open Access Journals (Sweden)

    Kristen M. Burson

    2012-03-01

    Full Text Available Key developments in NC-AFM have generally involved atomically flat crystalline surfaces. However, many surfaces of technological interest are not atomically flat. We discuss the experimental difficulties in obtaining high-resolution images of rough surfaces, with amorphous SiO2 as a specific case. We develop a quasi-1-D minimal model for noncontact atomic force microscopy, based on van der Waals interactions between a spherical tip and the surface, explicitly accounting for the corrugated substrate (modeled as a sinusoid. The model results show an attenuation of the topographic contours by ~30% for tip distances within 5 Å of the surface. Results also indicate a deviation from the Hamaker force law for a sphere interacting with a flat surface.

  12. Conformally parametrized surfaces associated with CPN-1 sigma models

    International Nuclear Information System (INIS)

    Grundland, A M; Hereman, W A; Yurdusen, I-dot

    2008-01-01

    Two-dimensional parametrized surfaces immersed in the su(N) algebra are investigated. The focus is on surfaces parametrized by solutions of the equations for the CP N-1 sigma model. The Lie-point symmetries of the CP N-1 model are computed for arbitrary N. The Weierstrass formula for immersion is determined and an explicit formula for a moving frame on a surface is constructed. This allows us to determine the structural equations and geometrical properties of surfaces in R N 2 -1 . The fundamental forms, Gaussian and mean curvatures, Willmore functional and topological charge of surfaces are given explicitly in terms of any holomorphic solution of the CP 2 model. The approach is illustrated through several examples, including surfaces immersed in low-dimensional su(N) algebras

  13. DSM-5 and paraphilic disorders.

    Science.gov (United States)

    First, Michael B

    2014-01-01

    Given that paraphilic disorders are diagnosed largely in forensic settings, virtually every significant change in the criteria has forensic implications. Several controversial changes were considered during the DSM-5 revision process, but most were ultimately not included in the published text. However, any changes that make it easier to assign a paraphilic disorder diagnosis to an individual must be considered with caution. Criterion A for paraphilic disorders has been changed to reduce one potential risk that could result in false-positive diagnoses (i.e., allowing evaluators to diagnose a paraphilic disorder based entirely on the presence of sexual acts). In contrast, many of the other changes including some of those in the text, make it easier to diagnose a specific paraphilia and thus increase the risk of false-positive diagnoses. Since the assignment of a paraphilic disorder diagnosis can result in adverse legal consequences, the actual forensic impact of the changes will depend on how the legal system incorporates these new definitions into statutes and case law. © 2014 American Academy of Psychiatry and the Law.

  14. Dissociative disorders in DSM-5.

    Science.gov (United States)

    Spiegel, David; Lewis-Fernández, Roberto; Lanius, Ruth; Vermetten, Eric; Simeon, Daphne; Friedman, Matthew

    2013-01-01

    The rationale, research literature, and proposed changes to the dissociative disorders and conversion disorder in the fifth edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM-5) are presented. Dissociative identity disorder will include reference to possession as well as identity fragmentation, to make the disorder more applicable to culturally diverse situations. Dissociative amnesia will include dissociative fugue as a subtype, since fugue is a rare disorder that always involves amnesia but does not always include confused wandering or loss of personality identity. Depersonalization disorder will include derealization as well, since the two often co-occur. A dissociative subtype of posttraumatic stress disorder (PTSD), defined by the presence of depersonalization or derealization in addition to other PTSD symptoms, is being recommended, based upon new epidemiological and neuroimaging evidence linking it to an early life history of adversity and a combination of frontal activation and limbic inhibition. Conversion disorder (functional neurological symptom disorder) will likely remain with the somatic symptom disorders, despite considerable dissociative comorbidity.

  15. Theoretical model of fast electron emission from surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Reinhold, C.; Burgdoerfer, J. [Univ. of Tennessee, Knoxville, TN (United States)]|[Oak Ridge National Laboratory, TN (United States)

    1993-05-01

    Electron emission in glancing-angle ion-surface collisions has become a focus of ion-surface interactions. Electron spectra can provide detailed information on the above surface neutralization dynamics of multiply charged ions, the electronic structure of the surface (surface density of states), and the long-ranged image interactions near the surface. Recent experiments have found that the convoy peak, well known from ion-atom and ion-solid collisions, is dramatically altered. The peak is broadened and shifted in energy which has been attributed to dynamical image interactions. We present a microscopic model for the emission of fast electrons in glancing-angle surface collisions. A classical trajectory Monte Carlo approach is utilized to calculate the evolution of electrons in the presence of their self image, the projectile Coulomb field and the image potential induced by the projectile. The excitation of collective surface modes is also incorporated.

  16. Explanatory models for ecological response surfaces

    International Nuclear Information System (INIS)

    Jager, H.I.; Overton, W.S.

    1991-01-01

    Understanding the spatial organization of ecological systems is a fundamental part of ecosystem study. While discovering the causal relationships of this organization is an important goal, our purpose of spatial description on a regional scale is best met by use of explanatory variables that are somewhat removed from the mechanistic causal level. Regional level understanding is best obtained from explanatory variables that reflect spatial gradients at the regional scale and from categorical variables that describe the discrete constituents of (statistical) populations, such as lakes. In this paper, we use a regression model to predict lake acid neutralizing capacity (ANC) based on environmental predictor variables over a large region. These predictions are used to produce model-based population estimates. Two key features of our modeling approach are that is honors the spatial context and the design of the sample data. The spatial context of the data are brought into the analysis of model residuals through the interpretation of residual maps and semivariograms. The sampling design is taken into account by including stratification variables from the design in the model. This ensures that the model applies to a real population of lakes (the target population), rather than whatever hypothetical population the sample is a random sample of

  17. How should we revise diagnostic criteria for substance use disorders in the DSM-V?

    Science.gov (United States)

    Martin, Christopher S; Chung, Tammy; Langenbucher, James W

    2008-08-01

    This article reviews literature on the validity and performance characteristics of the Diagnostic and Statistical Manual of Mental Disorders (4th ed.; DSM-IV; American Psychiatric Association, 1994) diagnostic criteria for substance use disorders (SUDs) and recommends changes in these criteria that should be considered for the next edition of the DSM (DSM-V). Substantial data indicate that DSM-IV substance abuse and substance dependence are not distinct categories and that SUD criteria are best modeled as reflecting a unidimensional continuum of substance-problem severity. The conceptually and empirically problematic substance abuse diagnosis should be abandoned in the DSM-V, with substance dependence defined by a single set of criteria. Data also indicate that various individual SUD criteria should be revised, dropped, or considered for inclusion in the DSM-V. The DSM-V should provide a framework that allows the integration of categorical and dimensional approaches to diagnosis. Important areas for further research are noted. Copyright (c) 2008 APA, all rights reserved.

  18. Impulsivity-related traits and their relation to DSM-5 section II and III personality disorders.

    Science.gov (United States)

    Few, Lauren R; Lynam, Donald R; Miller, Joshua D

    2015-07-01

    Difficulties with impulse control are considered a core feature of personality disorders (PDs) as assessed by the Diagnostic and Statistical Manual of Mental Disorders (5th edition [DSM-5]; American Psychiatric Association, 2013). Despite this, there has been relatively little examination of the manner in which DSM-5 PDs are characterized by multidimensional models of impulsivity that parse this broad umbrella construct into smaller, more unidimensional constructs. Using the UPPS model and measure of impulsivity (Whiteside & Lynam, 2001), the relations between 4 impulsivity-related traits and interview-rated scores on both DSM-5 Section II and III PDs and PD traits were examined in a community sample of individuals currently receiving psychological or psychiatric care (N = 106). As expected, the UPPS traits manifested correlations with the new Section III trait model that were generally consistent with the assertion that this new DSM-5 trait model reflects a pathological variant of the Five-Factor Model (FFM; e.g., UPPS traits associated with FFM conscientiousness were most strongly related to DSM-5 disinhibition traits). Overall, the UPPS traits accounted best for variance in DSM-5 Section II and III Cluster B PDs, consistent with these PDs being characterized, in part, by emotionally and cognitively based forms of impulsivity. (c) 2015 APA, all rights reserved).

  19. The DSM diagnostic criteria for pedophilia.

    Science.gov (United States)

    Blanchard, Ray

    2010-04-01

    This paper contains the author's report on pedophilia, submitted on June 2, 2008, to the work group charged with revising the diagnoses concerning sexual and gender identity disorders for the fifth edition of the American Psychiatric Association's Diagnostic and Statistical Manual of Mental Disorders (DSM). The author reviews the previously published criticisms and empirical research concerning the diagnostic criteria for pedophilia and presents criticism and relevant research of his own. The review shows that the DSM diagnostic criteria for pedophilia have repeatedly been criticized as unsatisfactory on logical or conceptual grounds, and that published empirical studies on the reliability and validity of these criteria have produced ambiguous results. It therefore seems that the current (i.e., DSM-IV-TR) diagnostic criteria need to be examined with an openness to major changes in the DSM-V.

  20. Digital terrain modeling and industrial surface metrology: Converging realms

    Science.gov (United States)

    Pike, R.J.

    2001-01-01

    Digital terrain modeling has a micro-and nanoscale counterpart in surface metrology, the numerical characterization of industrial surfaces. Instrumentation in semiconductor manufacturing and other high-technology fields can now contour surface irregularities down to the atomic scale. Surface metrology has been revolutionized by its ability to manipulate square-grid height matrices that are analogous to the digital elevation models (DEMs) used in physical geography. Because the shaping of industrial surfaces is a spatial process, the same concepts of analytical cartography that represent ground-surface form in geography evolved independently in metrology: The surface topography of manufactured components, exemplified here by automobile-engine cylinders, is routinely modeled by variogram analysis, relief shading, and most other techniques of parameterization and visualization familiar to geography. This article introduces industrial surface-metrology, examines the field in the context of terrain modeling and geomorphology and notes their similarities and differences, and raises theoretical issues to be addressed in progressing toward a unified practice of surface morphometry.

  1. Diagnosis and the DSM: a critical review

    OpenAIRE

    Vanheule, Stijn

    2014-01-01

    This book provides a critical evaluation of the fifth edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM-5). Starting from a historical overview of the evolution in psychiatric diagnosis, Stijn Vanheule argues that the diagnostic reliability of the DSM-5 is overrated: important factors that undermine its diagnostic reliability have never been sufficiently addressed and the common idea that the handbook is reliable rests on a biased interpretation of statistical data. Va...

  2. Object-Based Mangrove Species Classification Using Unmanned Aerial Vehicle Hyperspectral Images and Digital Surface Models

    Directory of Open Access Journals (Sweden)

    Jingjing Cao

    2018-01-01

    Full Text Available Mangroves are one of the most important coastal wetland ecosystems, and the compositions and distributions of mangrove species are essential for conservation and restoration efforts. Many studies have explored this topic using remote sensing images that were obtained by satellite-borne and airborne sensors, which are known to be efficient for monitoring the mangrove ecosystem. With improvements in carrier platforms and sensor technology, unmanned aerial vehicles (UAVs with high-resolution hyperspectral images in both spectral and spatial domains have been used to monitor crops, forests, and other landscapes of interest. This study aims to classify mangrove species on Qi’ao Island using object-based image analysis techniques based on UAV hyperspectral images obtained from a commercial hyperspectral imaging sensor (UHD 185 onboard a UAV platform. First, the image objects were obtained by segmenting the UAV hyperspectral image and the UAV-derived digital surface model (DSM data. Second, spectral features, textural features, and vegetation indices (VIs were extracted from the UAV hyperspectral image, and the UAV-derived DSM data were used to extract height information. Third, the classification and regression tree (CART method was used to selection bands, and the correlation-based feature selection (CFS algorithm was employed for feature reduction. Finally, the objects were classified into different mangrove species and other land covers based on their spectral and spatial characteristic differences. The classification results showed that when considering the three features (spectral features, textural features, and hyperspectral VIs, the overall classification accuracies of the two classifiers used in this paper, i.e., k-nearest neighbor (KNN and support vector machine (SVM, were 76.12% (Kappa = 0.73 and 82.39% (Kappa = 0.801, respectively. After incorporating tree height into the classification features, the accuracy of species classification

  3. Land Surface Microwave Emissivity Dynamics: Observations, Analysis and Modeling

    Science.gov (United States)

    Tian, Yudong; Peters-Lidard, Christa D.; Harrison, Kenneth W.; Kumar, Sujay; Ringerud, Sarah

    2014-01-01

    Land surface microwave emissivity affects remote sensing of both the atmosphere and the land surface. The dynamical behavior of microwave emissivity over a very diverse sample of land surface types is studied. With seven years of satellite measurements from AMSR-E, we identified various dynamical regimes of the land surface emission. In addition, we used two radiative transfer models (RTMs), the Community Radiative Transfer Model (CRTM) and the Community Microwave Emission Modeling Platform (CMEM), to simulate land surface emissivity dynamics. With both CRTM and CMEM coupled to NASA's Land Information System, global-scale land surface microwave emissivities were simulated for five years, and evaluated against AMSR-E observations. It is found that both models have successes and failures over various types of land surfaces. Among them, the desert shows the most consistent underestimates (by approx. 70-80%), due to limitations of the physical models used, and requires a revision in both systems. Other snow-free surface types exhibit various degrees of success and it is expected that parameter tuning can improve their performances.

  4. A systematic literature review of PTSD's latent structure in the Diagnostic and Statistical Manual of Mental Disorders: DSM-IV to DSM-5.

    Science.gov (United States)

    Armour, Cherie; Műllerová, Jana; Elhai, Jon D

    2016-03-01

    The factor structure of posttraumatic stress disorder (PTSD) has been widely researched, but consensus regarding the exact number and nature of factors is yet to be reached. The aim of the current study was to systematically review the extant literature on PTSD's latent structure in the Diagnostic and Statistical Manual of Mental Disorders (DSM) in order to identify the best-fitting model. One hundred and twelve research papers published after 1994 using confirmatory factor analysis and DSM-based measures of PTSD were included in the review. In the DSM-IV literature, four-factor models received substantial support, but the five-factor Dysphoric arousal model demonstrated the best fit, regardless of gender, measurement instrument or trauma type. The recently proposed DSM-5 PTSD model was found to be a good representation of PTSD's latent structure, but studies analysing the six- and seven-factor models suggest that the DSM-5 PTSD factor structure may need further alterations. Copyright © 2015 Elsevier Ltd. All rights reserved.

  5. Simple model of surface roughness for binary collision sputtering simulations

    Science.gov (United States)

    Lindsey, Sloan J.; Hobler, Gerhard; Maciążek, Dawid; Postawa, Zbigniew

    2017-02-01

    It has been shown that surface roughness can strongly influence the sputtering yield - especially at glancing incidence angles where the inclusion of surface roughness leads to an increase in sputtering yields. In this work, we propose a simple one-parameter model (the "density gradient model") which imitates surface roughness effects. In the model, the target's atomic density is assumed to vary linearly between the actual material density and zero. The layer width is the sole model parameter. The model has been implemented in the binary collision simulator IMSIL and has been evaluated against various geometric surface models for 5 keV Ga ions impinging an amorphous Si target. To aid the construction of a realistic rough surface topography, we have performed MD simulations of sequential 5 keV Ga impacts on an initially crystalline Si target. We show that our new model effectively reproduces the sputtering yield, with only minor variations in the energy and angular distributions of sputtered particles. The success of the density gradient model is attributed to a reduction of the reflection coefficient - leading to increased sputtering yields, similar in effect to surface roughness.

  6. MODELING THE INTERACTION OF AGROCHEMICALS WITH ENVIRONMENTAL SURFACES: PESTICIDES ON RUTILE AND ORGANO-RUTILE SURFACES

    Science.gov (United States)

    Non-bonded interactions between model pesticides and organo-mineral surfaces have been studied using molecular mechanical conformational calculations and molecular dynamics simulations. The minimum energy conformations and relative binding energies for the interaction of atrazine...

  7. Measuring and modeling surface sorption dynamics of organophosphate flame retardants on impervious surfaces

    Data.gov (United States)

    U.S. Environmental Protection Agency — The data presented in this data file is a product of a journal publication. The dataset contains measured and model predicted OPFRs gas-phase and surface-phase...

  8. A Two-Surface Viscoplastic Model for the Structural Steel

    Directory of Open Access Journals (Sweden)

    Dong-Keon Kim

    Full Text Available Abstract As extension of the previous two-surface model in plasticity, a two-surface model for viscoplasticity is presented herein. In order to validate and investigate the performance of the proposed model, several numerical simulations are undertaken especially for structural steel under monotonic and cyclic loading cases, where experimental results and numerical results from the rate dependent kinematic hardening model are also provided for the reference. For all the cases studied, the proposed model can appropriately account for the rate-effects in both maximum stress and hysteretic shapes.

  9. Improved simulation of groundwater - surface water interaction in catchment models

    Science.gov (United States)

    teklesadik, aklilu; van Griensven, Ann; Anibas, Christian; Huysmans, Marijke

    2016-04-01

    Groundwater storage can have a significant contribution to stream flow, therefore a thorough understanding of the groundwater surface water interaction is of prime important when doing catchment modeling. The aim of this study is to improve the simulation of groundwater - surface water interaction in a catchment model of the upper Zenne River basin located in Belgium. To achieve this objective we used the "Groundwater-Surface water Flow" (GSFLOW) modeling software, which is an integration of the surface water modeling tool "Precipitation and Runoff Modeling system" (PRMS) and the groundwater modeling tool MODFLOW. For this case study, the PRMS model and MODFLOW model were built and calibrated independently. The PRMS upper Zenne River basin model is divided into 84 hydrological response units (HRUs) and is calibrated with flow data at the Tubize gauging station. The spatial discretization of the MODFLOW upper Zenne groundwater flow model consists of 100m grids. Natural groundwater divides and the Brussels-Charleroi canal are used as boundary conditions for the MODFLOW model. The model is calibrated using piezometric data. The GSFLOW results were evaluated against a SWAT model application and field observations of groundwater-surface water interactions along a cross section of the Zenne River and riparian zone. The field observations confirm that there is no exchange of groundwater beyond the Brussel-Charleroi canal and that the interaction at the river bed is relatively low. The results show that there is a significant difference in the groundwater simulations when using GSFLOW versus SWAT. This indicates that the groundwater component representation in the SWAT model could be improved and that a more realistic implementation of the interactions between groundwater and surface water is advisable. This could be achieved by integrating SWAT and MODFLOW.

  10. High Quality Draft Genomes of the Type Strains Geobacillus thermocatenulatus DSM 730T, G. uzenensis DSM 23175T And Parageobacillus galactosidasius DSM 18751T.

    Science.gov (United States)

    Ramaloko, Winnie Thabisa; Koen, Nadine; Polliack, Shamara; Aliyu, Habibu; Lebre, Pedro Humberto; Mohr, Teresa; Oswald, Florian; Zwick, Michaela; Zeigler, Daniel Ray; Neumann, Anke; Syldatk, Christoph; Cowan, Don Arthur; De Maayer, Pieter

    2018-01-01

    The thermophilic 'Geobacilli' are important sources of thermostable enzymes and other biotechnologically relevant macromolecules. The present work reports the high quality draft genome sequences of previously unsequenced type strains of Geobacillus uzenensis (DSM 23175 T ), G. thermocatenulatus (DSM 730 T ) and Parageobacillus galactosidasius (DSM 18751 T ). Phylogenomic analyses revealed that DSM 18751 T and DSM 23175 T represent later heterotypic synonyms of P. toebii and G. subterraneus , respectively, while DSM 730 T represents the type strain for the species G. thermocatenulatus . These genome sequences will contribute towards a deeper understanding of the ecological and biological diversity and the biotechnological exploitation of the 'geobacilli'.

  11. A Test of the Empirical Profile and Coherence of the DSM-5 Psychopathy Specifier.

    Science.gov (United States)

    Miller, Joshua D; Lamkin, Joanna; Maples-Keller, Jessica L; Sleep, Chelsea E; Lynam, Donald R

    2017-11-13

    The Diagnostic and Statistical Manual of Mental Disorders-5th edition (DSM-5; American Psychiatric Association, 2013) introduced a psychopathy specifier (DSM-5 PS) as part of the Section III diagnostic model of antisocial personality disorder. Designed to capture the construct of fearless dominance/boldness, the DSM-5 PS is assessed on the basis of the presence of low scores on traits of withdrawal and anxiousness, and high scores on attention seeking. These constructs have garnered attention in the past decade but are the subject of substantial debate as to their role in the conceptualization and assessment of psychopathy, given their limited relations to the maladaptive outcomes typically associated with this personality disorder. In the current study (N = 340 undergraduates; 170 informants), we examined the DSM-5 PS, both in composite form and its trait subscales, to investigate the degree to which the DSM-5 PS manifested empirical profiles associated with psychopathy and its maladaptive correlates. Consistent with prior fearless dominance/boldness research, the DSM-5 PS manifested limited relations with other components of psychopathy, symptoms of DSM-5 Section II and III antisocial personality disorder, and self- and informant-related impairment scores. When examined at the individual subscale level, the 3 DSM-5 PS subscales manifested only partially overlapping profiles and only 1 of the 3-Attention Seeking-demonstrated an association with maladaptivity (e.g., externalizing behaviors). These findings raise important concerns about the coherence and utility of the DSM-5 PS as a diagnostic specifier included in a psychiatric nosology. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  12. Modeling marine surface microplastic transport to assess optimal removal locations

    OpenAIRE

    Sherman, P; Van Sebille, E

    2016-01-01

    Marine plastic pollution is an ever-increasing problem that demands immediate mitigation and reduction plans. Here, a model based on satellite-tracked buoy observations and scaled to a large data set of observations on microplastic from surface trawls was used to simulate the transport of plastics floating on the ocean surface from 2015 to 2025, with the goal to assess the optimal marine microplastic removal locations for two scenarios: removing the most surface microplastic and reducing the ...

  13. Modeling the Acid-Base Properties of Montmorillonite Edge Surfaces.

    Science.gov (United States)

    Tournassat, Christophe; Davis, James A; Chiaberge, Christophe; Grangeon, Sylvain; Bourg, Ian C

    2016-12-20

    The surface reactivity of clay minerals remains challenging to characterize because of a duality of adsorption surfaces and mechanisms that does not exist in the case of simple oxide surfaces: edge surfaces of clay minerals have a variable proton surface charge arising from hydroxyl functional groups, whereas basal surfaces have a permanent negative charge arising from isomorphic substitutions. Hence, the relationship between surface charge and surface potential on edge surfaces cannot be described using the Gouy-Chapman relation, because of a spillover of negative electrostatic potential from the basal surface onto the edge surface. While surface complexation models can be modified to account for these features, a predictive fit of experimental data was not possible until recently, because of uncertainty regarding the densities and intrinsic pK a values of edge functional groups. Here, we reexamine this problem in light of new knowledge on intrinsic pK a values obtained over the past decade using ab initio molecular dynamics simulations, and we propose a new formalism to describe edge functional groups. Our simulation results yield reasonable predictions of the best available experimental acid-base titration data.

  14. Modeling and Simulating Airport Surface Operations with Gate Conflicts

    Science.gov (United States)

    Zelinski, Shannon; Windhorst, Robert

    2017-01-01

    The Surface Operations Simulator and Scheduler (SOSS) is a fast-time simulation platform used to develop and test future surface scheduling concepts such as NASAs Air Traffic Demonstration 2 of time-based surface metering at Charlotte Douglas International Airport (CLT). Challenges associated with CLT surface operations have driven much of SOSS development. Recently, SOSS functionality for modeling hardstand operations was developed to address gate conflicts, which occur when an arrival and departure wish to occupy the same gate at the same time. Because surface metering concepts such as ATD2 have the potential to increase gates conflicts as departure are held at their gates, it is important to study the interaction between surface metering and gate conflict management. Several approaches to managing gate conflicts with and without the use of hardstands were simulated and their effects on surface operations and scheduler performance compared.

  15. Hadamard model on the super Riemann surface

    Science.gov (United States)

    Shuji, Matsumoto; Shozo, Uehara; Yukinori, Yasui

    1988-12-01

    A supersymmetrically extended version of the Hadamard model is investigated. Classical solutions are given, which imply that the system is chaotic. Quantization is performed in the path integral method. The quantized energy sum rule is shown to be a superanalog of the Selberg trace formula. The Selberg super zeta function is introduced and energy spectra associated with bosonic (fermionic) states are given by order 1 zero-points (poles) of the zeta function.

  16. A Surface Water Model for the Orinoco river basin

    NARCIS (Netherlands)

    Schot, P.P.; Poot, A.; Vonk, G.; Peeters, W.H.M.

    2001-01-01

    This report describes the surface water model developed for the Orinoco river basin. In the next chapter hydrology and climate of the study area are presented. In the third chapter the general model concept is described. The fourth chapter describes the effects of various processes in the model

  17. Integrating Surface Modeling into the Engineering Design Graphics Curriculum

    Science.gov (United States)

    Hartman, Nathan W.

    2006-01-01

    It has been suggested there is a knowledge base that surrounds the use of 3D modeling within the engineering design process and correspondingly within engineering design graphics education. While solid modeling receives a great deal of attention and discussion relative to curriculum efforts, and rightly so, surface modeling is an equally viable 3D…

  18. DSM-5 and culture: the need to move towards a shared model of care within a more equal patient-physician partnership.

    Science.gov (United States)

    Jacob, K S

    2014-02-01

    The universal models employed by psychiatry de-emphasise the role of context and culture. Despite highlighting the impact of culture on psychiatric diagnosis and management in the Diagnostic and Statistical Manual of Mental Disorders-5, most of the changes suggested remain in the introduction and appendices of the manual. Nevertheless, clinical and biological heterogeneity within phenomenological categories mandates the need to individualise care. However, social and cultural context, patient beliefs about causation, impact, treatment and outcome expectations are never systematically elicited, as they were not essential to diagnosis and classification. Patient experience and narratives are trivialised and the biomedical model is considered universal and transcendental. The need to elicit patient perspectives, evaluate local reality, assess culture, educate patients about possible interventions, and negotiate a shared plan of management between patient and clinician is cardinal for success. The biopsychosocial model, which operates within a paternalistic physician-patient relationship, needs to move towards a shared approach, within a more equal patient-clinician partnership. Copyright © 2013 Elsevier B.V. All rights reserved.

  19. Modeling of a nanoscale flexoelectric energy harvester with surface effects

    Science.gov (United States)

    Yan, Zhi

    2017-04-01

    This work presents the modeling of a beam energy harvester scavenging energy from ambient vibration based on the phenomenon of flexoelectricity. By considering surface elasticity, residual surface stress, surface piezoelectricity and bulk flexoelectricity, a modified Euler-Bernoulli beam model for the energy harvester is developed. After deriving the requisite energy expressions, the extended Hamilton's principle and the assumed-modes method are employed to obtain the discrete electromechanical Euler-Lagrange's equations. Then, the expressions of the steady-state electromechanical responses are given for harmonic base excitation. Numerical simulations are conducted to show the output voltage and the output power of the flexoelectric energy harvesters with different materials and sizes. Particular emphasis is given to the surface effects on the performance of the energy harvesters. It is found that the surface effects are sensitive to the beam geometries and the surface material constants, and the effect of residual surface stress is more significant than that of the surface elasticity and the surface piezoelectricity. The axial deformation of the beam is also considered in the model to account for the electromechanical coupling due to piezoelectricity, and results indicate that piezoelectricity will diminish the output electrical quantities for the case investigated. This work could lead to the development of flexoelectric energy harvesters that can make the micro- and nanoscale sensor systems autonomous.

  20. Empirical model for estimating the surface roughness of machined ...

    African Journals Online (AJOL)

    Michael Horsfall

    Regression Analysis to construct a prediction model for surface roughness such that once the process parameters (cutting speed, feed, depth of cut, Nose. Radius and Speed) are given, the surface roughness can be predicted. The work piece material was EN8 which was processed by carbide-inserted tool conducted on ...

  1. A tri-objective, dynamic weapon assignment model for surface ...

    African Journals Online (AJOL)

    2015-05-11

    May 11, 2015 ... of available surface-based weapon systems to engage aerial threats in an attempt to protect defended surface ...... time stages to include in the fixed mean calculation in (2) be fixed to the minimum length of a FW. ... to solve the model in 139 seconds on an Intel Core i7-4770 processor with 8GB of random.

  2. Mathematical and computer modeling of component surface shaping

    Science.gov (United States)

    Lyashkov, A.

    2016-04-01

    The process of shaping technical surfaces is an interaction of a tool (a shape element) and a component (a formable element or a workpiece) in their relative movements. It was established that the main objects of formation are: 1) a discriminant of a surfaces family, formed by the movement of the shape element relatively the workpiece; 2) an enveloping model of the real component surface obtained after machining, including transition curves and undercut lines; 3) The model of cut-off layers obtained in the process of shaping. When modeling shaping objects there are a lot of insufficiently solved or unsolved issues that make up a single scientific problem - a problem of qualitative shaping of the surface of the tool and then the component surface produced by this tool. The improvement of known metal-cutting tools, intensive development of systems of their computer-aided design requires further improvement of the methods of shaping the mating surfaces. In this regard, an important role is played by the study of the processes of shaping of technical surfaces with the use of the positive aspects of analytical and numerical mathematical methods and techniques associated with the use of mathematical and computer modeling. The author of the paper has posed and has solved the problem of development of mathematical, geometric and algorithmic support of computer-aided design of cutting tools based on computer simulation of the shaping process of surfaces.

  3. Land surface Verification Toolkit (LVT) - a generalized framework for land surface model evaluation

    Science.gov (United States)

    Kumar, S. V.; Peters-Lidard, C. D.; Santanello, J.; Harrison, K.; Liu, Y.; Shaw, M.

    2012-06-01

    Model evaluation and verification are key in improving the usage and applicability of simulation models for real-world applications. In this article, the development and capabilities of a formal system for land surface model evaluation called the Land surface Verification Toolkit (LVT) is described. LVT is designed to provide an integrated environment for systematic land model evaluation and facilitates a range of verification approaches and analysis capabilities. LVT operates across multiple temporal and spatial scales and employs a large suite of in-situ, remotely sensed and other model and reanalysis datasets in their native formats. In addition to the traditional accuracy-based measures, LVT also includes uncertainty and ensemble diagnostics, information theory measures, spatial similarity metrics and scale decomposition techniques that provide novel ways for performing diagnostic model evaluations. Though LVT was originally designed to support the land surface modeling and data assimilation framework known as the Land Information System (LIS), it supports hydrological data products from non-LIS environments as well. In addition, the analysis of diagnostics from various computational subsystems of LIS including data assimilation, optimization and uncertainty estimation are supported within LVT. Together, LIS and LVT provide a robust end-to-end environment for enabling the concepts of model data fusion for hydrological applications. The evolving capabilities of LVT framework are expected to facilitate rapid model evaluation efforts and aid the definition and refinement of formal evaluation procedures for the land surface modeling community.

  4. Including Finite Surface Span Effects in Empirical Jet-Surface Interaction Noise Models

    Science.gov (United States)

    Brown, Clifford A.

    2016-01-01

    The effect of finite span on the jet-surface interaction noise source and the jet mixing noise shielding and reflection effects is considered using recently acquired experimental data. First, the experimental setup and resulting data are presented with particular attention to the role of surface span on far-field noise. These effects are then included in existing empirical models that have previously assumed that all surfaces are semi-infinite. This extended abstract briefly describes the experimental setup and data leaving the empirical modeling aspects for the final paper.

  5. Microwave Remote Sensing Modeling of Ocean Surface Salinity and Winds Using an Empirical Sea Surface Spectrum

    Science.gov (United States)

    Yueh, Simon H.

    2004-01-01

    Active and passive microwave remote sensing techniques have been investigated for the remote sensing of ocean surface wind and salinity. We revised an ocean surface spectrum using the CMOD-5 geophysical model function (GMF) for the European Remote Sensing (ERS) C-band scatterometer and the Ku-band GMF for the NASA SeaWinds scatterometer. The predictions of microwave brightness temperatures from this model agree well with satellite, aircraft and tower-based microwave radiometer data. This suggests that the impact of surface roughness on microwave brightness temperatures and radar scattering coefficients of sea surfaces can be consistently characterized by a roughness spectrum, providing physical basis for using combined active and passive remote sensing techniques for ocean surface wind and salinity remote sensing.

  6. Microscopic Analysis and Modeling of Airport Surface Sequencing, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Although a number of airportal surface models exist and have been successfully used for analysis of airportal operations, only recently has it become possible to...

  7. Surface Ship Shock Modeling and Simulation: Two-Dimensional Analysis

    Directory of Open Access Journals (Sweden)

    Young S. Shin

    1998-01-01

    Full Text Available The modeling and simulation of the response of a surface ship system to underwater explosion requires an understanding of many different subject areas. These include the process of underwater explosion events, shock wave propagation, explosion gas bubble behavior and bubble-pulse loading, bulk and local cavitation, free surface effect, fluid-structure interaction, and structural dynamics. This paper investigates the effects of fluid-structure interaction and cavitation on the response of a surface ship using USA-NASTRAN-CFA code. First, the one-dimensional Bleich-Sandler model is used to validate the approach, and second, the underwater shock response of a two-dimensional mid-section model of a surface ship is predicted with a surrounding fluid model using a constitutive equation of a bilinear fluid which does not allow transmission of negative pressures.

  8. Source Term Model for Fine Particle Resuspension from Indoor Surfaces

    National Research Council Canada - National Science Library

    Kim, Yoojeong; Gidwani, Ashok; Sippola, Mark; Sohn, Chang W

    2008-01-01

    This Phase I effort developed a source term model for particle resuspension from indoor surfaces to be used as a source term boundary condition for CFD simulation of particle transport and dispersion in a building...

  9. Modeling of liquid flow in surface discontinuities

    Science.gov (United States)

    Lobanova, I. S.; Meshcheryakov, V. A.; Kalinichenko, A. N.

    2018-01-01

    Polymer composite and metallic materials have found wide application in various industries such as aviation, rocket, car manufacturing, ship manufacturing, etc. Many design elements need permanent quality control. Ensuring high quality and reliability of products is impossible without effective nondestructive testing methods. One of these methods is penetrant testing using penetrating substances based on liquid penetration into defect cavities. In this paper, we propose a model of liquid flow to determine the rates of filling the defect cavities with various materials and, based on this, to choose optimal control modes.

  10. A Prospective Study of the Concordance of DSM-IV and DSM-5 Diagnostic Criteria for Autism Spectrum Disorder

    Science.gov (United States)

    Mazurek, Micah O.; Lu, Frances; Symecko, Heather; Butter, Eric; Bing, Nicole M.; Hundley, Rachel J.; Poulsen, Marie; Kanne, Stephen M.; Macklin, Eric A.; Handen, Benjamin L.

    2017-01-01

    The transition from DSM-IV to DSM-5 criteria for autism spectrum disorder (ASD) sparked considerable concern about the potential implications of these changes. This study was designed to address limitations of prior studies by prospectively examining the concordance of DSM-IV and final DSM-5 criteria on a consecutive sample of 439 children…

  11. Autism Spectrum Disorders According to "DSM-IV-TR" and Comparison with "DSM-5" Draft Criteria: An Epidemiological Study

    Science.gov (United States)

    Mattila, Marja-Leena; Kielinen, Marko; Linna, Sirkka-Liisa; Jussila, Katja; Ebeling, Hanna; Bloigu, Risto; Joseph, Robert M.; Moilanen, Irma

    2011-01-01

    Objective: The latest definitions of autism spectrum disorders (ASDs) were specified in "DSM-IV-TR" in 2000. "DSM-5" criteria are planned for 2013. Here, we estimated the prevalence of ASDs and autism according to "DSM-IV-TR," clarified confusion concerning diagnostic criteria, and evaluated "DSM-5" draft…

  12. DSM-IV versus DSM-5 Autism Spectrum Disorder and Social Anxiety Disorder in childhood: Similarities and differences

    NARCIS (Netherlands)

    van Steensel, F.J.A.; Bögels, S.M.; de Bruin, E.I.

    2015-01-01

    Within the light of the DSM-5, the current study examined (1) how many and which children with a DSM-IV classification of autism spectrum disorder (ASD) fulfill the DSM-5 symptom-criteria, and (2) whether children who did and did not meet DSM-5 symptom-criteria and children with social anxiety

  13. The centrality of DSM and non-DSM depressive symptoms in Han Chinese women with major depression

    NARCIS (Netherlands)

    Kendler, K.S.; Aggen, S.H.; Flint, J.; Borsboom, D.; Fried, E.I.

    Introduction: We compared DSM-IV criteria for major depression (MD) with clinically selected non-DSM criteria in their ability to represent clinical features of depression. Method: We conducted network analyses of 19 DSM and non-DSM symptoms of MD assessed at personal interview in 5952 Han Chinese

  14. A model of the ground surface temperature for micrometeorological analysis

    Science.gov (United States)

    Leaf, Julian S.; Erell, Evyatar

    2017-07-01

    Micrometeorological models at various scales require ground surface temperature, which may not always be measured in sufficient spatial or temporal detail. There is thus a need for a model that can calculate the surface temperature using only widely available weather data, thermal properties of the ground, and surface properties. The vegetated/permeable surface energy balance (VP-SEB) model introduced here requires no a priori knowledge of soil temperature or moisture at any depth. It combines a two-layer characterization of the soil column following the heat conservation law with a sinusoidal function to estimate deep soil temperature, and a simplified procedure for calculating moisture content. A physically based solution is used for each of the energy balance components allowing VP-SEB to be highly portable. VP-SEB was tested using field data measuring bare loess desert soil in dry weather and following rain events. Modeled hourly surface temperature correlated well with the measured data (r 2 = 0.95 for a whole year), with a root-mean-square error of 2.77 K. The model was used to generate input for a pedestrian thermal comfort study using the Index of Thermal Stress (ITS). The simulation shows that the thermal stress on a pedestrian standing in the sun on a fully paved surface, which may be over 500 W on a warm summer day, may be as much as 100 W lower on a grass surface exposed to the same meteorological conditions.

  15. Biological Surface Adsorption Index of Nanomaterials: Modelling Surface Interactions of Nanomaterials with Biomolecules.

    Science.gov (United States)

    Chen, Ran; Riviere, Jim E

    2017-01-01

    Quantitative analysis of the interactions between nanomaterials and their surrounding environment is crucial for safety evaluation in the application of nanotechnology as well as its development and standardization. In this chapter, we demonstrate the importance of the adsorption of surrounding molecules onto the surface of nanomaterials by forming biocorona and thus impact the bio-identity and fate of those materials. We illustrate the key factors including various physical forces in determining the interaction happening at bio-nano interfaces. We further discuss the mathematical endeavors in explaining and predicting the adsorption phenomena, and propose a new statistics-based surface adsorption model, the Biological Surface Adsorption Index (BSAI), to quantitatively analyze the interaction profile of surface adsorption of a large group of small organic molecules onto nanomaterials with varying surface physicochemical properties, first employing five descriptors representing the surface energy profile of the nanomaterials, then further incorporating traditional semi-empirical adsorption models to address concentration effects of solutes. These Advancements in surface adsorption modelling showed a promising development in the application of quantitative predictive models in biological applications, nanomedicine, and environmental safety assessment of nanomaterials.

  16. Handbook of evaluation of utility DSM programs. [Demand-Side Management (DSM)

    Energy Technology Data Exchange (ETDEWEB)

    Hirst, E.; Reed, J. (eds.); Bronfman, B.; Fitzpatrick, G.; Hicks, E.; Hirst, E.; Hoffman, M.; Keating, K.; Michaels, H.; Nadel, S.; Peters, J.; Reed, J.; Saxonis, W.; Schoen, A.; Violette, D.

    1991-12-01

    Program evaluation has become a central issue in the world of utility integrated resource planning. The DSM programs that utilities were operating to meet federal requirements or to improve customer relations are now becoming big business. DSM is being considered an important resource in a utility's portfolio of options. In the last five years, the amount of money that utilities have invested in DSM has grown exponentially in most regulatory jurisdictions. Market analysts are now talking about DSM being a $30 billion industry by the end of the decade. If the large volume of DSM-program investments was not enough to highlight the importance of evaluation, then the introduction of regulatory incentives has really focused the spotlight. This handbook was developed through a process that involved many of those people who represent the diverse constituencies of DSM-program evaluation. We have come to recognize the many technical disciplines that must be employed to evaluate DSM programs. An analysis might start out based on the principles of utility load research to find out what happened, but a combination of engineering and statistical methods must be used to triangulate'' an estimate of what would have happened without the program. The difference, of course, is that elusive but prized result of evaluation: what happened as the direct result of the DSM program. Technical performance of DSM measures is not the sole determinant of the answer, either. We also recognize the importance of such behavioral attributes of DSM as persistence and free ridership. Finally, DSM evaluation is meaningless without attention to planning an approach, communicating results to relevant decision-makers, and focusing as much on the process as the impacts of the program. These topics are all covered in this handbook.

  17. Wetting kinetics of oil mixtures on fluorinated model cellulose surfaces.

    Science.gov (United States)

    Aulin, Christian; Shchukarev, Andrei; Lindqvist, Josefina; Malmström, Eva; Wågberg, Lars; Lindström, Tom

    2008-01-15

    The wetting of two different model cellulose surfaces has been studied; a regenerated cellulose (RG) surface prepared by spin-coating, and a novel multilayer film of poly(ethyleneimine) and a carboxymethylated microfibrillated cellulose (MFC). The cellulose films were characterized in detail using atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). AFM indicates smooth and continuous films on a nanometer scale and the RMS roughness of the RG cellulose and MFC surfaces was determined to be 3 and 6 nm, respectively. The cellulose films were modified by coating with various amounts of an anionic fluorosurfactant, perfluorooctadecanoic acid, or covalently modified with pentadecafluorooctanyl chloride. The fluorinated cellulose films were used to follow the spreading mechanisms of three different oil mixtures. The viscosity and surface tension of the oils were found to be essential parameters governing the spreading kinetics on these surfaces. XPS and dispersive surface energy measurements were made on the cellulose films coated with perfluorooctadecanoic acid. A strong correlation was found between the surface concentration of fluorine, the dispersive surface energy and the contact angle of castor oil on the surface. A dispersive surface energy less than 18 mN/m was required in order for the cellulose surface to be non-wetting (theta e>90 degrees ) by castor oil.

  18. A Comparison of DSM-IV-TR and DSM-5 Diagnostic Classifications in the Clinical Diagnosis of Autistic Spectrum Disorder.

    Science.gov (United States)

    Yaylaci, Ferhat; Miral, Suha

    2017-01-01

    Aim of this study was to compare children diagnosed with Pervasive Developmental Disorder (PDD) according to DSM-IV-TR and DSM-5 diagnostic systems. One hundred fifty children aged between 3 and 15 years diagnosed with PDD by DSM-IV-TR were included. PDD symptoms were reviewed through psychiatric assessment based on DSM-IV-TR and DSM-5 criteria. Clinical severity was determined using Childhood Autism Rating Scale (CARS) and Autism Behavior Checklist (ABC). A statistically significant decrease (19.3 %) was detected in the diagnostic ratio with DSM-5. Age and symptom severity differed significantly between those who were and were not diagnosed with PDD using DSM-5. B4 criteria in DSM-5 was most common criterion. Results indicate that individuals diagnosed with PDD by DSM-IV-TR criteria may not be diagnosed using DSM-5 criteria.

  19. Alternative methods to model frictional contact surfaces using NASTRAN

    Science.gov (United States)

    Hoang, Joseph

    1992-01-01

    Elongated (slotted) holes have been used extensively for the integration of equipment into Spacelab racks. In the past, this type of interface has been modeled assuming that there is not slippage between contact surfaces, or that there is no load transfer in the direction of the slot. Since the contact surfaces are bolted together, the contact friction provides a load path determined by the normal applied force (bolt preload) and the coefficient of friction. Three alternate methods that utilize spring elements, externally applied couples, and stress dependent elements are examined to model the contacted surfaces. Results of these methods are compared with results obtained from methods that use GAP elements and rigid elements.

  20. A discrete surface growth model for two components

    International Nuclear Information System (INIS)

    El-Nashar, H.F.; Cerdeira, H.A.

    2000-04-01

    We present a ballistic deposition model for the surface growth of a binary species A and C. Numerical simulations of the growth kinetics show a deviation from the Kardar-Parisi-Zhang universality class, model valid for only one kind of deposited particles. The study also shows that when the deposition of particles with less active bonds occurs more frequently the voids under the surface become relevant. However, the increase in overhang/voids processes under the moving interface does not strengthen greatly the local surface gradient. (author)

  1. Lectures on Modification, Characterization and Modeling of Surfaces. Vol. I

    International Nuclear Information System (INIS)

    1997-01-01

    The field of surfaces and thin films is now so broad that has applications in protective coatings, electronic devices, displays, sensors, optical equipment, bio-compatible coatings for surgical implants, odontological and cardiovascular use, and numerous other technologies that depend on the deposition processes. Even though there exist well established methods for both, production and characterization of high-quality surfaces, the interest in finding alternative methods more reliable and less expensive is one of the challenges of present technologies. In this special issue the attention is focused on some areas concerning surface modification, characterization and modeling of surfaces. The volume contains reviews and articles on plasma processing, nitriding, nitrocarburising, diamond-like films, laser and ion-beam surface modification,texture in films and coatings, nuclear techniques in surface analysis, electron spectroscopies, ion scattering spectroscopy, secondary ion mass spectroscopy, STM and AFM applications to surface science, nano structure preparation magnetic and electric properties, surface modeling, calculation of electric and magnetic properties, statistical thermodynamics of surfaces

  2. Integrated Surface/subsurface flow modeling in PFLOTRAN

    Energy Technology Data Exchange (ETDEWEB)

    Painter, Scott L [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-10-01

    Understanding soil water, groundwater, and shallow surface water dynamics as an integrated hydrological system is critical for understanding the Earth’s critical zone, the thin outer layer at our planet’s surface where vegetation, soil, rock, and gases interact to regulate the environment. Computational tools that take this view of soil moisture and shallow surface flows as a single integrated system are typically referred to as integrated surface/subsurface hydrology models. We extend the open-source, highly parallel, subsurface flow and reactive transport simulator PFLOTRAN to accommodate surface flows. In contrast to most previous implementations, we do not represent a distinct surface system. Instead, the vertical gradient in hydraulic head at the land surface is neglected, which allows the surface flow system to be eliminated and incorporated directly into the subsurface system. This tight coupling approach leads to a robust capability and also greatly simplifies implementation in existing subsurface simulators such as PFLOTRAN. Successful comparisons to independent numerical solutions build confidence in the approximation and implementation. Example simulations of the Walker Branch and East Fork Poplar Creek watersheds near Oak Ridge, Tennessee demonstrate the robustness of the approach in geometrically complex applications. The lack of a robust integrated surface/subsurface hydrology capability had been a barrier to PFLOTRAN’s use in critical zone studies. This work addresses that capability gap, thus enabling PFLOTRAN as a community platform for building integrated models of the critical zone.

  3. The usefulness of DSM-IV and DSM-5 conduct disorder subtyping in detained adolescents

    NARCIS (Netherlands)

    Colins, O.F.; Vermeiren, R.R.J.M.

    2013-01-01

    The aim of this study was to test whether the Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition (DSM-IV), and DSM-5 conduct disorder (CD) subtyping approaches identify adolescents with concurrent psychiatric morbidity and an increased risk to reoffend. A diagnostic interview was

  4. Brief Report: Comparability of DSM-IV and DSM-5 ASD Research Samples

    Science.gov (United States)

    Mazefsky, C. A.; McPartland, J. C.; Gastgeb, H. Z.; Minshew, N. J.

    2013-01-01

    Diagnostic and Statistical Manual (DSM-5) criteria for ASD have been criticized for being too restrictive, especially for more cognitively-able individuals. It is unclear, however, if high-functioning individuals deemed eligible for research via standardized diagnostic assessments would meet DSM-5 criteria. This study investigated the impact of…

  5. Reliability of DSM-IV Symptom Ratings of ADHD: Implications for DSM-V

    Science.gov (United States)

    Solanto, Mary V.; Alvir, Jose

    2009-01-01

    Objective: The objective of this study was to examine the intrarater reliability of "DSM-IV" ADHD symptoms. Method: Two-hundred-two children referred for attention problems and 49 comparison children (all 7-12 years) were rated by parents and teachers on the identical "DSM-IV" items presented in two different formats, the…

  6. DSM-IV, DSM-5, and ICD-11: Identifying children with posttraumatic stress disorder after disasters.

    Science.gov (United States)

    Danzi, BreAnne A; La Greca, Annette M

    2016-12-01

    Different criteria for diagnosing posttraumatic stress disorder (PTSD) have been recommended by the 5th edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM-5) and the proposed 11th edition of the International Classification of Diseases (ICD-11). Although children are vulnerable to PTSD following disasters, little is known about whether these revised criteria are appropriate for preadolescents, as diagnostic revisions have been based primarily on adult research. This study investigated rates of PTSD using DSM-IV, DSM-5, and ICD-11 diagnostic criteria, and their associations with symptom severity, impairment, and PTSD risk factors. Children (7-11 years) exposed to Hurricanes Ike (n = 327) or Charley (n = 383) completed measures 8-9 months postdisaster. Using diagnostic algorithms for DSM-IV, DSM-5, and ICD-11, rates of 'probable' PTSD were calculated. Across samples, rates of PTSD were similar. However, there was low agreement across the diagnostic systems, with about a third overlap in identified cases. Children identified only by ICD-11 had higher 'core' symptom severity but lower impairment than children identified only by DSM-IV or DSM-5. ICD-11 was associated with more established risk factors for PTSD than was DSM-5. Findings revealed differences in PTSD diagnosis across major diagnostic systems for preadolescent children, with no clear advantage to any one system. Further research on developmentally sensitive PTSD criteria for preadolescent children is needed. © 2016 Association for Child and Adolescent Mental Health.

  7. Autism Spectrum Disorders in the DSM-V: Better or Worse than the DSM-IV?

    Science.gov (United States)

    Wing, Lorna; Gould, Judith; Gillberg, Christopher

    2011-01-01

    The DSM-V-committee has recently published proposed diagnostic criteria for autism spectrum disorders. We examine these criteria in some detail. We believe that the DSM-committee has overlooked a number of important issues, including social imagination, diagnosis in infancy and adulthood, and the possibility that girls and women with autism may…

  8. How Do DSM-5 Personality Traits Align With Schema Therapy Constructs?

    DEFF Research Database (Denmark)

    Bach, Bo; Lee, Christopher; Mortensen, Erik Lykke

    2016-01-01

    DSM-5 offers an alternative model of personality pathology that includes 25 traits. Although personality disorders are mostly treated with psychotherapy, the correspondence between DSM-5 traits and concepts in evidence-based psychotherapy has not yet been evaluated adequately. Suitably, schema...... therapy was developed for treating personality disorders, and it has achieved promising evidence. The authors examined associations between DSM-5 traits and schema therapy constructs in a mixed sample of 662 adults, including 312 clinical participants. Associations were investigated in terms of factor...... loadings and regression coefficients in relation to five domains, followed by specific correlations among all constructs. The results indicated conceptually coherent associations, and 15 of 25 traits were strongly related to relevant schema therapy constructs. Conclusively, DSM-5 traits may be considered...

  9. Five-factor model personality disorder prototypes in a community sample: self- and informant-reports predicting interview-based DSM diagnoses.

    Science.gov (United States)

    Lawton, Erin M; Shields, Andrew J; Oltmanns, Thomas F

    2011-10-01

    The need for an empirically validated, dimensional system of personality disorders is becoming increasingly apparent. While a number of systems have been investigated in this regard, the five-factor model of personality has demonstrated the ability to adequately capture personality pathology. In particular, the personality disorder prototypes developed by Lynam and Widiger (2001) have been tested in a number of samples. The goal of the present study is to extend this literature by validating the prototypes in a large, representative community sample of later middle-aged adults using both self and informant reports. We found that the prototypes largely work well in this age group. Schizoid, Borderline, Histrionic, Narcissistic, and Avoidant personality disorders demonstrate good convergent validity, with a particularly strong pattern of discriminant validity for the latter four. Informant-reported prototypes show similar patterns to self reports for all analyses. This demonstrates that informants are not succumbing to halo representations of the participants, but are rather describing participants in nuanced ways. It is important that informant reports add significant predictive validity for Schizoid, Antisocial, Borderline, Histrionic, and Narcissistic personality disorders. Implications of our results and directions for future research are discussed.

  10. A spatial and temporal continuous surface-subsurface hydrologic model

    Science.gov (United States)

    Xiao, Qing-Fu; Ustin, Susan L.; Wallender, Wesley W.

    1996-12-01

    A hydrologic model integrating surface-subsurface processes was developed based on spatial and temporal continuity theory. The raster-based mass balance hydrologic model consists of several submodels which determine spatial and temporal patterns in precipitation, surface flow, infiltration, subsurface flow, and the linkages between these submodels. Model parameters and variables are derived directly or indirectly from satellite remote sensing data, topographic maps, soil maps, literature, and weather station data and are stored in a Geographic Information System (GIS) database used for visualization. Surface resolution of cells in the model is 20 m by 20 m (pixel resolution of the Systeme Probatoire d'Observation de la Terre (SPOT) satellite image) over a 2511 km2 study area around the Crazy Mountains, Alaska, a watershed on the Arctic Circle draining into the Yukon River. The outputs from this model illustrate the interaction of physical and biologic factors on the partitioning of hydrologic components in a complex landscape.

  11. Modeling Apple Surface Temperature Dynamics Based on Weather Data

    Directory of Open Access Journals (Sweden)

    Lei Li

    2014-10-01

    Full Text Available The exposure of fruit surfaces to direct sunlight during the summer months can result in sunburn damage. Losses due to sunburn damage are a major economic problem when marketing fresh apples. The objective of this study was to develop and validate a model for simulating fruit surface temperature (FST dynamics based on energy balance and measured weather data. A series of weather data (air temperature, humidity, solar radiation, and wind speed was recorded for seven hours between 11:00–18:00 for two months at fifteen minute intervals. To validate the model, the FSTs of “Fuji” apples were monitored using an infrared camera in a natural orchard environment. The FST dynamics were measured using a series of thermal images. For the apples that were completely exposed to the sun, the RMSE of the model for estimating FST was less than 2.0 °C. A sensitivity analysis of the emissivity of the apple surface and the conductance of the fruit surface to water vapour showed that accurate estimations of the apple surface emissivity were important for the model. The validation results showed that the model was capable of accurately describing the thermal performances of apples under different solar radiation intensities. Thus, this model could be used to more accurately estimate the FST relative to estimates that only consider the air temperature. In addition, this model provides useful information for sunburn protection management.

  12. Continuity Between Interview-Rated Personality Disorders and Self-Reported DSM-5 Traits in a Danish Psychiatric Sample

    DEFF Research Database (Denmark)

    Bach, Bo; Anderson, Jaime; Simonsen, Erik

    2017-01-01

    The Diagnostic and Statistical Manual of Mental Disorders (5th ed.; DSM-5) Section III offers an alternative model for the diagnosis of personality disorders (PDs), including 25 pathological personality trait facets organized into 5 trait domains. To maintain continuity with the categorical PD...... diagnoses found in DSM-5 Section II, specified sets of facets are configured into familiar PD types. The current study aimed to evaluate the continuity across the Section II and III models of PDs. A sample of 142 psychiatric outpatients were administered the Personality Inventory for DSM-5 and rated...... with the Structured Clinical Interview for the DSM-IV Axis II disorders. We investigated whether the DSM-5 Section III facet-profiles would be associated with their respective Section II counterparts, as well as determining whether additional facets could augment the prediction of the Section II disorders. Results...

  13. DSM-5 PTSD's symptom dimensions and relations with major depression's symptom dimensions in a primary care sample

    DEFF Research Database (Denmark)

    Contractor, A. A.; Durham, T. A.; Brennan, J. A.

    2014-01-01

    Existing literature indicates significant comorbidity between posttraumatic stress disorder (PTSD) and major depression. We examined whether PTSD's dysphoria and mood/cognitions factors, conceptualized by the empirically supported four-factor DSM-5 PTSD models, account for PTSD's inherent...... and somatic/non-somatic depression. Using 181 trauma-exposed primary care patients, confirmatory factor analyses (CFA) indicated a well-fitting DSM-5 PTSD dysphoria model, DSM-5 numbing model and two-factor depression model. Both somatic and non-somatic depression factors were more related to PTSD's dysphoria...

  14. Adhesion of perfume-filled microcapsules to model fabric surfaces.

    Science.gov (United States)

    He, Yanping; Bowen, James; Andrews, James W; Liu, Min; Smets, Johan; Zhang, Zhibing

    2014-01-01

    The retention and adhesion of melamine formaldehyde (MF) microcapsules on a model fabric surface in aqueous solution were investigated using a customised flow chamber technique and atomic force microscopy (AFM). A cellulose film was employed as a model fabric surface. Modification of the cellulose with chitosan was found to increase the retention and adhesion of microcapsules on the model fabric surface. The AFM force-displacement data reveal that bridging forces resulting from the extension of cellulose chains dominate the adhesion between the microcapsule and the unmodified cellulose film, whereas electrostatic attraction helps the microcapsules adhere to the chitosan-modified cellulose film. The correlation between results obtained using these two complementary techniques suggests that the flow chamber device can be potentially used for rapid screening of the effect of chemical modification on the adhesion of microparticles to surfaces, reducing the time required to achieve an optimal formulation.

  15. A physically based model of global freshwater surface temperature

    Science.gov (United States)

    van Beek, Ludovicus P. H.; Eikelboom, Tessa; van Vliet, Michelle T. H.; Bierkens, Marc F. P.

    2012-09-01

    Temperature determines a range of physical properties of water and exerts a strong control on surface water biogeochemistry. Thus, in freshwater ecosystems the thermal regime directly affects the geographical distribution of aquatic species through their growth and metabolism and indirectly through their tolerance to parasites and diseases. Models used to predict surface water temperature range between physically based deterministic models and statistical approaches. Here we present the initial results of a physically based deterministic model of global freshwater surface temperature. The model adds a surface water energy balance to river discharge modeled by the global hydrological model PCR-GLOBWB. In addition to advection of energy from direct precipitation, runoff, and lateral exchange along the drainage network, energy is exchanged between the water body and the atmosphere by shortwave and longwave radiation and sensible and latent heat fluxes. Also included are ice formation and its effect on heat storage and river hydraulics. We use the coupled surface water and energy balance model to simulate global freshwater surface temperature at daily time steps with a spatial resolution of 0.5° on a regular grid for the period 1976-2000. We opt to parameterize the model with globally available data and apply it without calibration in order to preserve its physical basis with the outlook of evaluating the effects of atmospheric warming on freshwater surface temperature. We validate our simulation results with daily temperature data from rivers and lakes (U.S. Geological Survey (USGS), limited to the USA) and compare mean monthly temperatures with those recorded in the Global Environment Monitoring System (GEMS) data set. Results show that the model is able to capture the mean monthly surface temperature for the majority of the GEMS stations, while the interannual variability as derived from the USGS and NOAA data was captured reasonably well. Results are poorest for

  16. Standard fire behavior fuel models: a comprehensive set for use with Rothermel's surface fire spread model

    Science.gov (United States)

    Joe H. Scott; Robert E. Burgan

    2005-01-01

    This report describes a new set of standard fire behavior fuel models for use with Rothermel's surface fire spread model and the relationship of the new set to the original set of 13 fire behavior fuel models. To assist with transition to using the new fuel models, a fuel model selection guide, fuel model crosswalk, and set of fuel model photos are provided.

  17. Surface-source modeling and estimation using biomagnetic measurements.

    Science.gov (United States)

    Yetik, Imam Samil; Nehorai, Arye; Muravchik, Carlos H; Haueisen, Jens; Eiselt, Michael

    2006-10-01

    We propose a number of electric source models that are spatially distributed on an unknown surface for biomagnetism. These can be useful to model, e.g., patches of electrical activity on the cortex. We use a realistic head (or another organ) model and discuss the special case of a spherical head model with radial sensors resulting in more efficient computations of the estimates for magnetoencephalography. We derive forward solutions, maximum likelihood (ML) estimates, and Cramér-Rao bound (CRB) expressions for the unknown source parameters. A model selection method is applied to decide on the most appropriate model. We also present numerical examples to compare the performances and computational costs of the different models and illustrate when it is possible to distinguish between surface and focal sources or line sources. Finally, we apply our methods to real biomagnetic data of phantom human torso and demonstrate the applicability of them.

  18. Estimation of shape model parameters for 3D surfaces

    DEFF Research Database (Denmark)

    Erbou, Søren Gylling Hemmingsen; Darkner, Sune; Fripp, Jurgen

    2008-01-01

    is applied to a database of 3D surfaces from a section of the porcine pelvic bone extracted from 33 CT scans. A leave-one-out validation shows that the parameters of the first 3 modes of the shape model can be predicted with a mean difference within [-0.01,0.02] from the true mean, with a standard deviation......Statistical shape models are widely used as a compact way of representing shape variation. Fitting a shape model to unseen data enables characterizing the data in terms of the model parameters. In this paper a Gauss-Newton optimization scheme is proposed to estimate shape model parameters of 3D...... surfaces using distance maps, which enables the estimation of model parameters without the requirement of point correspondence. For applications with acquisition limitations such as speed and cost, this formulation enables the fitting of a statistical shape model to arbitrarily sampled data. The method...

  19. The Blake-Zisserman model for digital surface models segmentation

    Directory of Open Access Journals (Sweden)

    M. Zanetti

    2013-10-01

    Full Text Available The Blake-Zisserman functional is a second-order variational model for data segmentation. The model is build up of several terms, the nature and the interaction of them allow to obtain a smooth approximation of the data that preserves the constant-gradient areas morphology, which are explicitly detected by partitioning the data with the graph of two special functions: the edge-detector function, which detects discontinuities of the datum, and the edge/crease-detector function, which also detects discontinuities of the gradient. First, the main features of the model are presented to justify the sense of the application of the model to DSMs. It is stressed the fact that the model can yield an almost piecewise-linear approximation of the data. This result is certainly of some interest for the specific application of the model to urban DSMs. Then, an example of its application is presented and the results are discussed to highlight how the features of the model affect the model outputs. The smooth approximation of the data produced by the model is thought to be a better candidate for further processing. In this sense, the application of the Blake-Zisserman model can be seen as a useful preprocessing step in the chain of DSMs processing. Eventually, some perspectives are presented to show some promising applications and developments of the Blake-Zisserman model.

  20. Modeling and analysis for surface roughness and material removal ...

    African Journals Online (AJOL)

    user

    terms of cutting parameters is also developed using regression modeling. The results indicate that the developed model is suitable for prediction of surface roughness and material removal rate in machining of unidirectional glass fiber reinforced plastics (UD-GFRP) composites. The predicted values and measured values ...

  1. Modeling Alaska boreal forests with a controlled trend surface approach

    Science.gov (United States)

    Mo Zhou; Jingjing Liang

    2012-01-01

    An approach of Controlled Trend Surface was proposed to simultaneously take into consideration large-scale spatial trends and nonspatial effects. A geospatial model of the Alaska boreal forest was developed from 446 permanent sample plots, which addressed large-scale spatial trends in recruitment, diameter growth, and mortality. The model was tested on two sets of...

  2. Modelling surface run-off and trends analysis over India

    Indian Academy of Sciences (India)

    responsible for run-off generation plays a major role in run-off modelling at region scales. Remote sensing, GIS and advancement of the computer technology based evaluation of land surface prop- erties at spatial and temporal scales are very useful input data for hydrological models. Using remote sensing data is not only ...

  3. Modeling and analysis for surface roughness and material removal ...

    African Journals Online (AJOL)

    International Journal of Engineering, Science and Technology ... A multiple objective utility model has been studied to optimize both the dependent parameters. ... Keywords: UD-GFRP composites, ANOVA, multi response optimization, utility concept, regression modeling, surface roughness, material removal rate, ...

  4. Modified Critical State Two-Surface Plasticity Model for Sands

    DEFF Research Database (Denmark)

    Sørensen, Kris Wessel; Nielsen, Søren Kjær; Shajarati, Amir

    This article describes the outline of a numerical integration scheme for a critical state two-surface plasticity model for sands. The model is slightly modified by LeBlanc (2008) compared to the original formulation presented by Manzari and Dafalias (1997) and has the ability to correctly model...... the stress-strain response of sands. The model is versatile and can be used to simulate drained and undrained conditions, due to the fact that the model can efficiently calculate change in void ratio as well as pore pressure. The objective of the constitutive model is to investigate if the numerical...

  5. A 2-D model for friction of complex anisotropic surfaces

    Science.gov (United States)

    Costagliola, Gianluca; Bosia, Federico; Pugno, Nicola M.

    2018-03-01

    The friction force observed at macroscale is the result of interactions at various lower length scales that are difficult to model in a combined manner. For this reason, simplified approaches are required, depending on the specific aspect to be investigated. In particular, the dimensionality of the system is often reduced, especially in models designed to provide a qualitative description of frictional properties of elastic materials, e.g. the spring-block model. In this paper, we implement for the first time a two dimensional extension of the spring-block model, applying it to structured surfaces and investigating by means of numerical simulations the frictional behaviour of a surface in the presence of features like cavities, pillars or complex anisotropic structures. We show how friction can be effectively tuned by appropriate design of such surface features.

  6. Scale-adaptive surface modeling of vascular structures

    Directory of Open Access Journals (Sweden)

    Ma Xin

    2010-11-01

    Full Text Available Abstract Background The effective geometric modeling of vascular structures is crucial for diagnosis, therapy planning and medical education. These applications require good balance with respect to surface smoothness, surface accuracy, triangle quality and surface size. Methods Our method first extracts the vascular boundary voxels from the segmentation result, and utilizes these voxels to build a three-dimensional (3D point cloud whose normal vectors are estimated via covariance analysis. Then a 3D implicit indicator function is computed from the oriented 3D point cloud by solving a Poisson equation. Finally the vessel surface is generated by a proposed adaptive polygonization algorithm for explicit 3D visualization. Results Experiments carried out on several typical vascular structures demonstrate that the presented method yields both a smooth morphologically correct and a topologically preserved two-manifold surface, which is scale-adaptive to the local curvature of the surface. Furthermore, the presented method produces fewer and better-shaped triangles with satisfactory surface quality and accuracy. Conclusions Compared to other state-of-the-art approaches, our method reaches good balance in terms of smoothness, accuracy, triangle quality and surface size. The vessel surfaces produced by our method are suitable for applications such as computational fluid dynamics simulations and real-time virtual interventional surgery.

  7. Surface Winds and Dust Biases in Climate Models

    Science.gov (United States)

    Evan, A. T.

    2018-01-01

    An analysis of North African dust from models participating in the Fifth Climate Models Intercomparison Project (CMIP5) suggested that, when forced by observed sea surface temperatures, these models were unable to reproduce any aspects of the observed year-to-year variability in dust from North Africa. Consequently, there would be little reason to have confidence in the models' projections of changes in dust over the 21st century. However, no subsequent study has elucidated the root causes of the disagreement between CMIP5 and observed dust. Here I develop an idealized model of dust emission and then use this model to show that, over North Africa, such biases in CMIP5 models are due to errors in the surface wind fields and not due to the representation of dust emission processes. These results also suggest that because the surface wind field over North Africa is highly spatially autocorrelated, intermodel differences in the spatial structure of dust emission have little effect on the relative change in year-to-year dust emission over the continent. I use these results to show that similar biases in North African dust from the NASA Modern Era Retrospective analysis for Research and Applications (MERRA) version 2 surface wind field biases but that these wind biases were not present in the first version of MERRA.

  8. Modelling cell motility and chemotaxis with evolving surface finite elements.

    Science.gov (United States)

    Elliott, Charles M; Stinner, Björn; Venkataraman, Chandrasekhar

    2012-11-07

    We present a mathematical and a computational framework for the modelling of cell motility. The cell membrane is represented by an evolving surface, with the movement of the cell determined by the interaction of various forces that act normal to the surface. We consider external forces such as those that may arise owing to inhomogeneities in the medium and a pressure that constrains the enclosed volume, as well as internal forces that arise from the reaction of the cells' surface to stretching and bending. We also consider a protrusive force associated with a reaction-diffusion system (RDS) posed on the cell membrane, with cell polarization modelled by this surface RDS. The computational method is based on an evolving surface finite-element method. The general method can account for the large deformations that arise in cell motility and allows the simulation of cell migration in three dimensions. We illustrate applications of the proposed modelling framework and numerical method by reporting on numerical simulations of a model for eukaryotic chemotaxis and a model for the persistent movement of keratocytes in two and three space dimensions. Movies of the simulated cells can be obtained from http://homepages.warwick.ac.uk/∼maskae/CV_Warwick/Chemotaxis.html.

  9. Structure of DSM-5 and ICD-11 personality domains in Iranian community sample.

    Science.gov (United States)

    Lotfi, Mozhgan; Bach, Bo; Amini, Mahdi; Simonsen, Erik

    2018-02-02

    Personality disorders (PD) have been deemed the most problematic diagnostic grouping in terms of validity and utility, which particularly applies to non-Western societies. The current study evaluated the structural validity of PD trait domains in the Diagnostic and Statistical Manual of Mental Disorders-5 (DSM-5) Section III and the proposed International Classification of Diseases-11 (ICD-11) in the Iranian population. Community-dwelling adults (n = 285; 66% women) were administered the Personality Inventory for DSM-5, whereas the proposed ICD-11 trait domains were delineated using an algorithm for Personality Inventory for DSM-5 trait facets. The five-factor organization and higher-order hierarchical structure of both models were examined using exploratory structural equation modelling analyses. The five-factor exploratory structural equation modelling loadings overall resembled international findings on DSM-5 Section III traits (including Psychoticism), whereas the ICD-11 five-factor structure aligned with the proposed ICD-11 domain features (including Anankastia). Additionally, we identified a hierarchical structure from one to five factors for both models that conceptually aligned with established models of personality and psychopathology. This study provided initial support for the structural validity of DSM-5 and ICD-11 PD trait models in Iranian culture. Future research warrants replication in larger samples and clinical populations. Copyright © 2018 John Wiley & Sons, Ltd. Copyright © 2018 John Wiley & Sons, Ltd.

  10. Surface Structures of Model Metal Catalysts in Reactant Gases.

    Science.gov (United States)

    Tao, Franklin Feng; Ralston, Walter T; Liu, Huimin; Somorjai, Gabor A

    2018-01-18

    Atomic scale knowledge of the surface structure of a metal catalyst is essential for fundamentally understanding the catalytic reactions performed on it. A correlation between the true atomic surface structure of a metal catalyst under reaction conditions and the corresponding catalytic performance is the key in pursuing mechanistic insight at a molecular level. Here the surface structures of model, metal catalysts in both ultrahigh vacuum (UHV) and gaseous environments of CO at a wide range of pressures are discussed. The complexity of observed surface structures in CO is illustrated, driving the necessity for visualization of the catalytic metals under realistic reaction conditions. Technical barriers for visualization of metal surfaces in situ at high temperature and high pressure are discussed.

  11. Assessment of Response Surface Models using Independent Confirmation Point Analysis

    Science.gov (United States)

    DeLoach, Richard

    2010-01-01

    This paper highlights various advantages that confirmation-point residuals have over conventional model design-point residuals in assessing the adequacy of a response surface model fitted by regression techniques to a sample of experimental data. Particular advantages are highlighted for the case of design matrices that may be ill-conditioned for a given sample of data. The impact of both aleatory and epistemological uncertainty in response model adequacy assessments is considered.

  12. Modelling of frost formation and growth on microstuctured surface

    Science.gov (United States)

    Muntaha, Md. Ali; Haider, Md. Mushfique; Rahman, Md. Ashiqur

    2016-07-01

    Frost formation on heat exchangers is an undesirable phenomenon often encountered in different applications where the cold surface with a temperature below freezing point of water is exposed to humid air. The formation of frost on the heat transfer surface results in an increase in pressure drop and reduction in heat transfer, resulting in a reduction of the system efficiency. Many factors, including the temperature and moisture content of air, cold plate temperature, surface wettability etc., are known to affect frost formation and growth. In our present study, a model for frost growth on rectangular, periodic microgroove surfaces for a range of microgroove dimension (ten to hundreds of micron) is presented. The mathematical model is developed analytically by solving the governing heat and mass transfer equations with appropriate boundary conditions using the EES (Engineering Equation Solver) software. For temperature, a convective boundary condition at frost-air interface and a fixed cold plate surface temperature is used. Instead of considering the saturation or super-saturation models, density gradient at the surface is obtained by considering experimentally-found specified heat flux. The effect of surface wettability is incorporated by considering the distribution of condensed water droplets at the early stage of frost formation. Thickness, density and thermal conductivity of frost layer on the micro-grooved surfaces are found to vary with the dimension of the grooves. The variation of density and thickness of the frost layer on these micro-grooved surfaces under natural convection is numerally determined for a range of plate temperature and air temperature conditions and is compared with experimental results found in the open literature.

  13. Continuity between DSM-5 Categorical Criteria and Traits Criteria for Borderline Personality Disorder.

    Science.gov (United States)

    Bach, Bo; Sellbom, Martin

    2016-08-01

    Borderline personality disorder (BPD) includes a heterogeneous constellation of symptoms operationalized with 9 categorical criteria. As the field of personality disorder (PD) research moves to emphasize dimensional traits in its operationalization, it is important to delineate continuity between the 9 DSM-IV/Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition (DSM-5) categorical criteria for BPD and the trait dimensions in DSM-5 Section III. To date, no study has attempted such validation. We examined the associations between the 9 categorical DSM-IV/DSM-5 criteria for BPD and the trait dimensions of the alternative DSM-5 model for PDs in consecutively recruited psychiatric outpatients (N = 142; 68% female; age: mean 29.02, SD 8.38). This was investigated by means of bivariate correlations, followed by multiple logistic regression analysis. The categorical BPD criteria were associated with conceptually related DSM-5 Section III traits (P > 0.001), except for the criterion of chronic feelings of emptiness. Consistent with the proposed traits criteria for BPD in DSM-5 Section III, we found Emotional lability, Anxiousness, Separation insecurity, Depressivity, Impulsivity, Risk taking, and Hostility to capture conceptually coherent BPD categorical criteria, while Suspiciousness was also strongly associated with BPD criteria. At the domain level, this applied to Negative affectivity, Disinhibition, and Psychoticism. Notably, Emotional lability, Impulsivity, and Suspiciousness emerged as unique predictors of BPD (P > 0.05). In addition to the proposed BPD traits criteria, Suspiciousness and features of Psychoticism also augment BPD features. Provided that these findings are replicated in forthcoming research, a modified traits operationalization of BPD is warranted. © The Author(s) 2016.

  14. Mnemonics for DSM-IV personality disorders.

    Science.gov (United States)

    Pinkofsky, H B

    1997-09-01

    The paper presents several mnemonics to assist clinicians in recalling DSM-IV diagnostic criteria for personality disorders. The mnemonics are acronyms, and each letter is associated with a specific criterion. Each acronym reflects a facet of the related disorder; for example, the acronym for the diagnostic criteria for paranoid personality disorder is SUSPECT, and for histrionic personality disorder it is PRAISE ME. The mnemonics have been used to teach students and residents the conceptual nature of DSM-IV disorders and to help them remember the criteria.

  15. Measures of Narcissism and Their Relations to DSM-5 Pathological Traits: A Critical Reappraisal.

    Science.gov (United States)

    Miller, Joshua D; Lynam, Donald R; Campbell, W Keith

    2016-02-01

    There exists substantial debate about how to best assess pathological narcissism with a variety of measures designed to assess grandiose and vulnerable narcissism, as well as the DSM-IV and DSM-5 based conceptualizations of narcissistic personality disorder (NPD). Wright and colleagues published correlations between several narcissism measures (Narcissistic Personality Inventory [NPI]; Pathological Narcissism Inventory [PNI]; Personality Diagnostic Questionnaire [PDQ] NPD) with the traits comprising the DSM-5 Section III personality trait model. In the current study, we examine the agreement manifested by Wright and colleagues' narcissism-DSM-5 trait profiles with expert ratings of the DSM-5 traits most relevant to descriptions of DSM-IV NPD. Despite concerns regarding the NPI's ability to measure pathological narcissism, its trait profile was strongly correlated with expert ratings, as was PDQ NPD's profile. Conversely, the trait profiles associated with the PNI were primarily uncorrelated with the expert rated NPD profile. The implications of these findings with regard to the assessment of narcissism are discussed. © The Author(s) 2014.

  16. The impact of endorsing Spitzer's proposed criteria for PTSD in the forthcoming DSM-V on male and female Veterans.

    Science.gov (United States)

    Miller, Lyndsey N; Chard, Kathleen M; Schumm, Jeremiah A; O'Brien, Carol

    2011-06-01

    This study explored differences between Spitzer's proposed model of posttraumatic stress disorder (PTSD) and the current DSM-IV diagnostic classification scheme in 353 Veterans. The majority of Veterans (89%) diagnosed with PTSD as specified in the DSM-IV also met Spitzer's proposed criteria. Veterans who met both DSM-IV and Spitzer's proposed criteria had significantly higher Clinician Administered PTSD Scale severity scores than Veterans only meeting DSM-IV criteria. Logistic regression indicated that being African American and having no comorbid diagnosis of major depressive disorder or history of a substance use disorder were found to predict those Veterans who met current, but not proposed criteria. These findings have important implications regarding proposed changes to the diagnostic classification criteria for PTSD in the forthcoming DSM-V. Copyright © 2011 Elsevier Ltd. All rights reserved.

  17. DSM-Oriented Scales of the Child Behavior Checklist and Youth Self-Report in clinically referred Spanish children.

    Science.gov (United States)

    Lacalle, Montserrat; Ezpeleta, Lourdes; Doménech, Josep M

    2012-03-01

    The Achenbach System of Empirically Based Assessment (ASEBA) is an example of the efforts to integrate categorical and dimensional assessment methods. The latest editions of the Child Behavior Checklist (CBCL) and the Youth Self-Report (YSR) included the DSM-Oriented Scales, constructed in rational manner based on the items making up these inventories. To analyze the psychometric properties of the DSM-Oriented Scales of the CBCL and YSR. A clinical sample of 420 children and adolescents (aged 8-17 years) was assessed with the CBCL and YSR, with a structured diagnostic interview and with measures of functional impairment to study the reliability and validity of the DSM-Oriented Scales. Internal consistency ranged from moderate to good for all the scales except the DSM-Anxiety Problems Scale. Agreement between parents and children ranged between moderate and low values. Kappa coefficients showed moderate agreement in the different symptoms. The DSM-Oriented Scales presented acceptable diagnostic power for DSM-IV disorders and a significant relationship with measures of functional impairment. The DSM-Oriented Scales constitute a useful approach from the dimensional model to the DSM-IV disorders in Spanish clinical population.

  18. Surface photovoltage measurements and finite element modeling of SAW devices.

    Energy Technology Data Exchange (ETDEWEB)

    Donnelly, Christine

    2012-03-01

    Over the course of a Summer 2011 internship with the MEMS department of Sandia National Laboratories, work was completed on two major projects. The first and main project of the summer involved taking surface photovoltage measurements for silicon samples, and using these measurements to determine surface recombination velocities and minority carrier diffusion lengths of the materials. The SPV method was used to fill gaps in the knowledge of material parameters that had not been determined successfully by other characterization methods. The second project involved creating a 2D finite element model of a surface acoustic wave device. A basic form of the model with the expected impedance response curve was completed, and the model is ready to be further developed for analysis of MEMS photonic resonator devices.

  19. DNSC08 mean sea surface and mean dynamic topography models

    DEFF Research Database (Denmark)

    Andersen, Ole Baltazar; Knudsen, Per

    2009-01-01

    -2004. It is the first global MSS without a polar gap including all of the Arctic Ocean by including laser altimetry from the ICESat mission. The mean dynamic topography (MDT) is the quantity that bridges the geoid and the mean sea surface constraining large-scale ocean circulation. Here we present a new high...... models. This way a consistent modeling of the interannual sea level variability is carried out before different MSS and MDT models are compared. Altimetric derived physical MSS can be converted into an "inverse barometer corrected MSS'' by correcting the altimeter range for the inverse barometer effect......The Danish National Space Center data set DNSC08 mean sea surface (MSS) is a new enhanced mapping of the mean sea surface height of the worlds oceans, derived from a combination of 12 years of satellite altimetry from a total of eight different satellites covering the period 1993...

  20. TECHNICAL VISION SYSTEM FOR THE ROBOTIC MODEL OF SURFACE VESSEL

    Directory of Open Access Journals (Sweden)

    V. S. Gromov

    2016-07-01

    Full Text Available The paper presents results of work on creation of technical vision systems within the training complex for the verification of control systems by the model of surface vessel. The developed system allows determination of the coordinates and orientation angle of the object of control by means of an external video camera on one bench mark and without the need to install additional equipment on the object of control itself. Testing of the method was carried out on the robotic complex with the model of a surface vessel with a length of 430 mm; coordinates of the control object were determined with the accuracy of 2 mm. This method can be applied as a subsystem of receiving coordinates for systems of automatic control of surface vessels when testing on the scale models.

  1. Surface complexation modeling of americium sorption onto volcanic tuff.

    Science.gov (United States)

    Ding, M; Kelkar, S; Meijer, A

    2014-10-01

    Results of a surface complexation model (SCM) for americium sorption on volcanic rocks (devitrified and zeolitic tuff) are presented. The model was developed using PHREEQC and based on laboratory data for americium sorption on quartz. Available data for sorption of americium on quartz as a function of pH in dilute groundwater can be modeled with two surface reactions involving an americium sulfate and an americium carbonate complex. It was assumed in applying the model to volcanic rocks from Yucca Mountain, that the surface properties of volcanic rocks can be represented by a quartz surface. Using groundwaters compositionally representative of Yucca Mountain, americium sorption distribution coefficient (Kd, L/Kg) values were calculated as function of pH. These Kd values are close to the experimentally determined Kd values for americium sorption on volcanic rocks, decreasing with increasing pH in the pH range from 7 to 9. The surface complexation constants, derived in this study, allow prediction of sorption of americium in a natural complex system, taking into account the inherent uncertainty associated with geochemical conditions that occur along transport pathways. Published by Elsevier Ltd.

  2. Did the DSM-5 Improve the Traumatic Stressor Criterion?: Association of DSM-IV and DSM-5 Criterion A with Posttraumatic Stress Disorder Symptoms.

    Science.gov (United States)

    Larsen, Sadie E; Berenbaum, Howard

    2017-01-01

    A recent meta-analysis found that DSM-III- and DSM-IV-defined traumas were associated with only slightly higher posttraumatic stress disorder (PTSD) symptoms than nontraumatic stressors. The current study is the first to examine whether DSM-5-defined traumas were associated with higher levels of PTSD than DSM-IV-defined traumas. Further, we examined theoretically relevant event characteristics to determine whether characteristics other than those outlined in the DSM could predict PTSD symptoms. One hundred six women who had experienced a trauma or significant stressor completed questionnaires assessing PTSD, depression, impairment, and event characteristics. Events were rated for whether they qualified as DSM-IV and DSM-5 trauma. There were no significant differences between DSM-IV-defined traumas and stressors. For DSM-5, effect sizes were slightly larger but still nonsignificant (except for significantly higher hyperarousal following traumas vs. stressors). Self-reported fear for one's life significantly predicted PTSD symptoms. Our results indicate that the current DSM-5 definition of trauma, although a slight improvement from DSM-IV, is not highly predictive of who develops PTSD symptoms. Our study also indicates the importance of individual perception of life threat in the prediction of PTSD. © 2017 S. Karger AG, Basel.

  3. Can DSM-IV borderline personality disorder be diagnosed via dimensional personality traits? Implications for the DSM-5 personality disorder proposal.

    Science.gov (United States)

    Miller, Joshua D; Morse, Jennifer Q; Nolf, Kimberly; Stepp, Stephanie D; Pilkonis, Paul A

    2012-11-01

    The proposal for the diagnosis of personality disorders (PDs) in the Diagnostic and Statistical Manual of Mental Disorders, 5th edition (DSM-5;American Psychiatric Association, in preparation) involves, in part, the use of elevated scores on dimensional personality traits. For instance, the diagnosis of borderline personality disorder (BPD) in the DSM-5 will require evidence of self- and interpersonal impairment as well as elevated scores on traits of emotional lability, anxiousness, separation insecurity, depressivity, impulsivity, risk taking, and hostility. Using a sample of individuals from the community (N = 134), half of whom were receiving psychiatric treatment, we tested whether the summation of relevant personality trait scores, using data derived from a measure of the Five-Factor Model of personality (FFM), would result in a construct that corresponds to the Diagnostic and Statistical Manual of Mental Disorders, 4th ed. (DSM-IV, American Psychiatric Association, 2000) BPD construct as scored by expert consensus ratings. The DSM-IV and FFM BPD scores were significantly correlated (r = .60) and generated highly similar patterns of relations (ricc = .84) with key constructs from BPD's nomological network. These data should serve to allay concerns that the DSM-5's new diagnostic approach will be detrimental to the identification of BPD. (PsycINFO Database Record (c) 2012 APA, all rights reserved).

  4. Sediment Transport Model for a Surface Irrigation System

    Directory of Open Access Journals (Sweden)

    Damodhara R. Mailapalli

    2013-01-01

    Full Text Available Controlling irrigation-induced soil erosion is one of the important issues of irrigation management and surface water impairment. Irrigation models are useful in managing the irrigation and the associated ill effects on agricultural environment. In this paper, a physically based surface irrigation model was developed to predict sediment transport in irrigated furrows by integrating an irrigation hydraulic model with a quasi-steady state sediment transport model to predict sediment load in furrow irrigation. The irrigation hydraulic model simulates flow in a furrow irrigation system using the analytically solved zero-inertial overland flow equations and 1D-Green-Ampt, 2D-Fok, and Kostiakov-Lewis infiltration equations. Performance of the sediment transport model was evaluated for bare and cropped furrow fields. The results indicated that the sediment transport model can predict the initial sediment rate adequately, but the simulated sediment rate was less accurate for the later part of the irrigation event. Sensitivity analysis of the parameters of the sediment module showed that the soil erodibility coefficient was the most influential parameter for determining sediment load in furrow irrigation. The developed modeling tool can be used as a water management tool for mitigating sediment loss from the surface irrigated fields.

  5. RADARGRAMMETRIC DIGITAL SURFACE MODELS GENERATION FROM TERRASAR-X IMAGERY: CASE STUDIES, PROBLEMS AND POTENTIALITIES

    Directory of Open Access Journals (Sweden)

    P. Capaldo

    2012-07-01

    Full Text Available The interest for the radargrammetric approach to Digital Surface Models (DSMs generation has been growing in last years thanks to the availability of very high resolution imagery acquired by new SAR (Synthetic Aperture Radar sensors, as COSMO-SkyMed, Radarsat-2 and TerraSAR-X, which are able to supply imagery up to 1 m ground resolution. DSMs radargrammetric generation approach consists of two basic steps, as for the standard photogrammetry applied to optical imagery: the imagery (at least a stereo pair orientation and the image matching for the generation of the points cloud. The steps of the radargrammetric DSMs generation have been implemented into SISAR (Software per Immagini Satellitari ad Alta Risoluzione, a scientific software developed at Geodesy and Geomatics Institute of the University of Rome “La Sapienza”. Moreover, starting from the radargrammetric orientation model, a tool for the Rational Polynomial Coefficients (RPCs for SAR images have been implemented. The possibility to generate RPCs, re-parametrizing a rigorous orientation model through a standardized set of coefficients which can be managed by a Rational Polynomial Coefficients (RPFs model (similarly to optical high resolution imagery sounds of particular interest since, at present, the most part of SAR imagery (except from Radarsat-2 is not supplied with RPCs, although the corresponding RPFs model is available in several commercial software. In particular the RPCs model has been used in the matching process and in the stereo restitution for the DSMs generation, with the advantage of shorter computational time. This paper discusses the application and the results of the implemented algorithm for radargrammetric DSMs generation from TerraSAR-X SpotLight imagery, acquired in Spotlight mode over Trento (Northern Italy. Urban and extra-urban (forested, cultivated areas were considered in two different tiles, and a final overall accuracy ranging from 4.5 to 6 meters was

  6. Improvement of a land surface model for accurate prediction of surface energy and water balances

    International Nuclear Information System (INIS)

    Katata, Genki

    2009-02-01

    In order to predict energy and water balances between the biosphere and atmosphere accurately, sophisticated schemes to calculate evaporation and adsorption processes in the soil and cloud (fog) water deposition on vegetation were implemented in the one-dimensional atmosphere-soil-vegetation model including CO 2 exchange process (SOLVEG2). Performance tests in arid areas showed that the above schemes have a significant effect on surface energy and water balances. The framework of the above schemes incorporated in the SOLVEG2 and instruction for running the model are documented. With further modifications of the model to implement the carbon exchanges between the vegetation and soil, deposition processes of materials on the land surface, vegetation stress-growth-dynamics etc., the model is suited to evaluate an effect of environmental loads to ecosystems by atmospheric pollutants and radioactive substances under climate changes such as global warming and drought. (author)

  7. Do Lateral Flows Matter for the Hyperresolution Land Surface Modeling?

    Science.gov (United States)

    Ji, Peng; Yuan, Xing; Liang, Xin-Zhong

    2017-11-01

    Hyperresolution land surface modeling provides an unprecedented opportunity to simulate locally relevant water and energy cycle, but lateral surface and/or subsurface flows that are essential at fine scale are often neglected by most one-dimensional land surface models (LSMs). To analyze effects of lateral flows across scales, a Conjunctive Surface-Subsurface Process model, which considers soil moisture-surface flow interaction and quasi-three-dimensional subsurface flow, is implemented over a mountainous HyperHydro test bed in southwestern USA at different resolutions. Validation over more than 70 International Soil Moisture Network stations shows that there are significant improvements in soil moisture simulations from 30 km to 4 km as finer soil property and precipitation data are used, with correlation increased by 5%-16% and error decreased by 5%. Lateral surface flow has a significant influence on surface soil moisture and ground evaporation even at coarse resolution. Effect of lateral subsurface flow on soil moisture is nontrivial at 1 km or finer resolution especially over wet areas. At 100 m resolution, topography-induced lateral subsurface flow causes drier peaks and wetter valleys, decreases latent heat by 8% at peaks, while increases it by 12% at valleys. Furthermore, influences of lateral subsurface flow on ground evaporation and vegetation transpiration are more significant during dry season due to a stronger coupling between soil moisture and evapotranspiration. Therefore, it is worthy to incorporate lateral flow processes in hyperresolution LSMs to better represent water and energy heterogeneity even with limited hyperresolution meteorological and surface data.

  8. Surface science studies of model fuel cell electrocatalysts

    Science.gov (United States)

    Marković, N. M.; Ross, P. N.

    2002-04-01

    The purpose of this review is to discuss progress in the understanding of electrocatalytic reactions through the study of model systems with surface spectroscopies. Pure metal single crystals and well-characterized bulk alloys have been used quite successfully as models for real (commercial) electrocatalysts. Given the sheer volume of all work in electrocatalysis that is on fuel cell reactions, we will focus on electrocatalysts for fuel cells. Since Pt is the model fuel cell electrocatalyst, we will focus entirely on studies of pure Pt and Pt bimetallic alloys. The electrode reactions discussed include hydrogen oxidation/evolution, oxygen reduction, and the electrooxidation of carbon monoxide, formic acid, and methanol. Surface spectroscopies emphasized are FTIR, STM/AFM and surface X-ray scattering (SXS). The discussion focuses on the relation between the energetics of adsorption of intermediates and the reaction pathway and kinetics, and how the energetics and kinetics relate to the extrinsic properties of the model system, e.g. surface structure and/or composition. Finally, we conclude by discussing the limitations that are reached by using pure metal single crystals and well-characterized bulk alloys as models for real catalysts, and suggest some directions for developing more realistic systems.

  9. Surface growth of two kinds of particles deposition models

    International Nuclear Information System (INIS)

    Wei Wang; Cerdeira, H.A.

    1993-10-01

    The surface kinetics with diffusion of two kinds of particles (A and C) deposition models, randomlike and ballisticlike depositing on a (1 + 1)-dimensional substrate, has been studied in this paper. The scaling behaviour of the surface width for these two models is obtained for various deposition probability P of particle C (the probability of particle A, being 1 - P). We found that both models have a scaling behaviour: the surface width growth only depends on the time, W ∼ t α(p) for the early stage and W ∼ t β(P) for the intermediate time, as well as W ∼ L z for the later time with different exponents α(P) and β(P) and z for two models. In addition, there is a phase transition when the saturation surface widths are scaled to the deposition probability P for both models W(t = ∞) ∼ P γ : before and after the transition the scaling exponent γ is different. This transition is interpreted as that there are different morphologic structures when the depositing probability for one kind of particle, particle C, is larger than a critical value P c . (author). 16 refs, 5 figs, 2 tabs

  10. A land surface scheme for atmospheric and hydrologic models: SEWAB (Surface Energy and Water Balance)

    Energy Technology Data Exchange (ETDEWEB)

    Mengelkamp, H.T.; Warrach, K.; Raschke, E. [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Atmosphaerenphysik

    1997-12-31

    A soil-vegetation-atmosphere-transfer scheme is presented here which solves the coupled system of the Surface Energy and Water Balance (SEWAB) equations considering partly vegetated surfaces. It is based on the one-layer concept for vegetation. In the soil the diffusion equations for heat and moisture are solved on a multi-layer grid. SEWAB has been developed to serve as a land-surface scheme for atmospheric circulation models. Being forced with atmospheric data from either simulations or measurements it calculates surface and subsurface runoff that can serve as input to hydrologic models. The model has been validated with field data from the FIFE experiment and has participated in the PILPS project for intercomparison of land-surface parameterization schemes. From these experiments we feel that SEWAB reasonably well partitions the radiation and precipitation into sensible and latent heat fluxes as well as into runoff and soil moisture Storage. (orig.) [Deutsch] Ein Landoberflaechenschema wird vorgestellt, das den Transport von Waerme und Wasser zwischen dem Erdboden, der Vegetation und der Atmosphaere unter Beruecksichtigung von teilweise bewachsenem Boden beschreibt. Im Erdboden werden die Diffusionsgleichungen fuer Waerme und Feuchte auf einem Gitter mit mehreren Schichten geloest. Das Schema SEWAB (Surface Energy and Water Balance) beschreibt die Landoberflaechenprozesse in atmosphaerischen Modellen und berechnet den Oberflaechenabfluss und den Basisabfluss, die als Eingabedaten fuer hydrologische Modelle genutzt werden koennen. Das Modell wurde mit Daten des FIFE-Experiments kalibriert und hat an Vergleichsexperimenten fuer Landoberflaechen-Schemata im Rahmen des PILPS-Projektes teilgenommen. Dabei hat sich gezeigt, dass die Aufteilung der einfallenden Strahlung und des Niederschlages in den sensiblen und latenten Waermefluss und auch in Abfluss und Speicherung der Bodenfeuchte in SEWAB den beobachteten Daten recht gut entspricht. (orig.)

  11. Exposing earth surface process model simulations to a large audience

    Science.gov (United States)

    Overeem, I.; Kettner, A. J.; Borkowski, L.; Russell, E. L.; Peddicord, H.

    2015-12-01

    The Community Surface Dynamics Modeling System (CSDMS) represents a diverse group of >1300 scientists who develop and apply numerical models to better understand the Earth's surface. CSDMS has a mandate to make the public more aware of model capabilities and therefore started sharing state-of-the-art surface process modeling results with large audiences. One platform to reach audiences outside the science community is through museum displays on 'Science on a Sphere' (SOS). Developed by NOAA, SOS is a giant globe, linked with computers and multiple projectors and can display data and animations on a sphere. CSDMS has developed and contributed model simulation datasets for the SOS system since 2014, including hydrological processes, coastal processes, and human interactions with the environment. Model simulations of a hydrological and sediment transport model (WBM-SED) illustrate global river discharge patterns. WAVEWATCH III simulations have been specifically processed to show the impacts of hurricanes on ocean waves, with focus on hurricane Katrina and super storm Sandy. A large world dataset of dams built over the last two centuries gives an impression of the profound influence of humans on water management. Given the exposure of SOS, CSDMS aims to contribute at least 2 model datasets a year, and will soon provide displays of global river sediment fluxes and changes of the sea ice free season along the Arctic coast. Over 100 facilities worldwide show these numerical model displays to an estimated 33 million people every year. Datasets storyboards, and teacher follow-up materials associated with the simulations, are developed to address common core science K-12 standards. CSDMS dataset documentation aims to make people aware of the fact that they look at numerical model results, that underlying models have inherent assumptions and simplifications, and that limitations are known. CSDMS contributions aim to familiarize large audiences with the use of numerical

  12. Validating modeled turbulent heat fluxes across large freshwater surfaces

    Science.gov (United States)

    Lofgren, B. M.; Fujisaki-Manome, A.; Gronewold, A.; Anderson, E. J.; Fitzpatrick, L.; Blanken, P.; Spence, C.; Lenters, J. D.; Xiao, C.; Charusambot, U.

    2017-12-01

    Turbulent fluxes of latent and sensible heat are important physical processes that influence the energy and water budgets of the Great Lakes. Validation and improvement of bulk flux algorithms to simulate these turbulent heat fluxes are critical for accurate prediction of hydrodynamics, water levels, weather, and climate over the region. Here we consider five heat flux algorithms from several model systems; the Finite-Volume Community Ocean Model, the Weather Research and Forecasting model, and the Large Lake Thermodynamics Model, which are used in research and operational environments and concentrate on different aspects of the Great Lakes' physical system, but interface at the lake surface. The heat flux algorithms were isolated from each model and driven by meteorological data from over-lake stations in the Great Lakes Evaporation Network. The simulation results were compared with eddy covariance flux measurements at the same stations. All models show the capacity to the seasonal cycle of the turbulent heat fluxes. Overall, the Coupled Ocean Atmosphere Response Experiment algorithm in FVCOM has the best agreement with eddy covariance measurements. Simulations with the other four algorithms are overall improved by updating the parameterization of roughness length scales of temperature and humidity. Agreement between modelled and observed fluxes notably varied with geographical locations of the stations. For example, at the Long Point station in Lake Erie, observed fluxes are likely influenced by the upwind land surface while the simulations do not take account of the land surface influence, and therefore the agreement is worse in general.

  13. Land-Surface-Atmosphere Coupling in Observations and Models

    Directory of Open Access Journals (Sweden)

    Alan K Betts

    2009-07-01

    Full Text Available The diurnal cycle and the daily mean at the land-surface result from the coupling of many physical processes. The framework of this review is largely conceptual; looking for relationships and information in the coupling of processes in models and observations. Starting from the surface energy balance, the role of the surface and cloud albedos in the shortwave and longwave fluxes is discussed. A long-wave radiative scaling of the diurnal temperature range and the night-time boundary layer is summarized. Several aspects of the local surface energy partition are presented: the role of soilwater availability and clouds; vector methods for understanding mixed layer evolution, and the coupling between surface and boundary layer that determines the lifting condensation level. Moving to larger scales, evaporation-precipitation feedback in models is discussed; and the coupling of column water vapor, clouds and precipitation to vertical motion and moisture convergence over the Amazon. The final topic is a comparison of the ratio of surface shortwave cloud forcing to the diabatic precipitation forcing of the atmosphere in ERA-40 with observations.

  14. Characterization, modeling and simulation of fused deposition modeling fabricated part surfaces

    Science.gov (United States)

    Taufik, Mohammad; Jain, Prashant K.

    2017-12-01

    Surface roughness is generally used for characterization, modeling and simulation of fused deposition modeling (FDM) fabricated part surfaces. But the average surface roughness is not able to provide the insight of surface characteristics with sharp peaks and deep valleys. It deals in the average sense for all types of surfaces, including FDM fabricated surfaces with distinct surface profile features. The present research work shows that kurtosis and skewness can be used for characterization, modeling and simulation of FDM surfaces because these roughness parameters have the ability to characterize a surface with sharp peaks and deep valleys. It can be critical in certain application areas in tribology and biomedicine, where the surface profile plays an important role. Thus, in this study along with surface roughness, skewness and kurtosis are considered to show a novel strategy to provide new transferable knowledge about FDM fabricated part surfaces. The results suggest that the surface roughness, skewness and kurtosis are significantly different at 0° and in the range (0°, 30°], [30°, 90°] of build orientation.

  15. Performance of fire behavior fuel models developed for the Rothermel Surface Fire Spread Model

    Science.gov (United States)

    Robert Ziel; W. Matt Jolly

    2009-01-01

    In 2005, 40 new fire behavior fuel models were published for use with the Rothermel Surface Fire Spread Model. These new models are intended to augment the original 13 developed in 1972 and 1976. As a compiled set of quantitative fuel descriptions that serve as input to the Rothermel model, the selected fire behavior fuel model has always been critical to the resulting...

  16. Meet the New (and Improved?) DSM-5

    Science.gov (United States)

    Hart, Shelly R.; Pate, Christine M.; Brock, Stephen E.

    2013-01-01

    Clinical diagnosis is not a typical school psychologist activity. However, changes to the "Diagnostic and Statistical Manual of Mental Disorders" (DSM), the framework for diagnosis put forth by the American Psychiatric Association (APA), are important to consider. First published in 1952, major revisions are being proposed for this new edition…

  17. Personality disorder types proposed for DSM-5

    NARCIS (Netherlands)

    Skodol, A.E.; Bender, D.S.; Morey, L.C.; Clark, L.A.; Oldham, J.M.; Alarcon, R.D.; Krueger, R.F.; Verheul, R.; Bell, C.C.; Siever, L.J.

    2011-01-01

    The Personality and Personality Disorders Work Group has proposed five specific personality disorder (PD) types for DSM-5, to be rated on a dimension of fit: antisocial/psychopathic, avoidant, borderline, obsessive-compulsive, and schizotypal. Each type is identified by core impairments in

  18. DSM-5 en psychische problemen bij kinderen

    NARCIS (Netherlands)

    Bögels, S.; Braet, C.

    2014-01-01

    Eén van de ambities van de DSM-5 was om het ontwikkelingsperspectief van psychische stoornissen, van de baarmoeder tot de dood, beter tot uiting te laten komen in het handboek. In deze bijdrage bespreken we op welke wijze deze ambitie is aangepakt en welke consequenties dit heeft gehad voor de

  19. Beyond the DSM: trends in psychiatry diagnoses

    Directory of Open Access Journals (Sweden)

    Andre Russowsky Brunoni

    Full Text Available Abstract Background: Although widely used in clinical practice and research, Diagnostic and Statistical Manual of Mental Disorders (DSM diagnoses have low validity: patients with different mental disorders can share similar symptoms, while those with the same diagnosis might have different symptoms. In fact, the DSM diagnostic system has been considered one of the main obstacles for further development of psychiatric research. Recently, it has been proposed that psychiatry nosology should be reframed according to a biologically-based etiology. Objectives: To review present and past endeavors of establishing an etiology-based nosology. Methods: Comprehensive review of articles on the topic. Results: From Hippocrates onwards, multiple attempts have been undertaken aiming to move etiology and nosology closer. The most recent efforts are represented by Developmental Psychopathology (DP and the Research Domain Criteria (RDoC, which presents an operational matrix recommended to be used in clinical research instead of the DSM diagnoses. Discussion: The DSM-based nosology is faulty. RDoC and DP might be interesting alternatives for an etiology-based nosology. However, while DP has already brought promising results, RDoC is a novel proposal, whose advantages and disadvantages should gradually be identified in the upcoming years.

  20. Stochastic Modeling and Deterministic Limit of Catalytic Surface Processes

    DEFF Research Database (Denmark)

    Starke, Jens; Reichert, Christian; Eiswirth, Markus

    2007-01-01

    Three levels of modeling, microscopic, mesoscopic and macroscopic are discussed for the CO oxidation on low-index platinum single crystal surfaces. The introduced models on the microscopic and mesoscopic level are stochastic while the model on the macroscopic level is deterministic. It can......, such that in contrast to the microscopic model the spatial resolution is reduced. The derivation of deterministic limit equations is in correspondence with the successful description of experiments under low-pressure conditions by deterministic reaction-diffusion equations while for intermediate pressures phenomena...

  1. Should Relational Aggression Be Included in DSM-V?

    Science.gov (United States)

    Keenan, Kate; Coyne, Claire; Lahey, Benjamin B.

    2008-01-01

    The study examines whether relational aggression should be included in DSM-V disruptive behavior disorders. The results conclude that some additional information is gathered from assessing relational aggression but not enough to be included in DSM-V.

  2. Mathematical model of the metal mould surface temperature optimization

    International Nuclear Information System (INIS)

    Mlynek, Jaroslav; Knobloch, Roman; Srb, Radek

    2015-01-01

    The article is focused on the problem of generating a uniform temperature field on the inner surface of shell metal moulds. Such moulds are used e.g. in the automotive industry for artificial leather production. To produce artificial leather with uniform surface structure and colour shade the temperature on the inner surface of the mould has to be as homogeneous as possible. The heating of the mould is realized by infrared heaters located above the outer mould surface. The conceived mathematical model allows us to optimize the locations of infrared heaters over the mould, so that approximately uniform heat radiation intensity is generated. A version of differential evolution algorithm programmed in Matlab development environment was created by the authors for the optimization process. For temperate calculations software system ANSYS was used. A practical example of optimization of heaters locations and calculation of the temperature of the mould is included at the end of the article

  3. Mathematical modeling for surface hardness in investment casting applications

    International Nuclear Information System (INIS)

    Singh, Rupinder

    2012-01-01

    Investment casting (IC) has many potential engineering applications. Not much work hitherto has been reported for modeling the surface hardness (SH) in IC of industrial components. In the present study, outcome of Taguchi based macro model has been used for developing a mathematical model for SH; using Buckingham's π theorem. Three input parameters namely volume/surface area (V/A) ratio of cast components, slurry layer's combination (LC) and molten metal pouring temperature were selected to give output in form of SH. This study will provide main effects of these variables on SH and will shed light on the SH mechanism in IC. The comparison with experimental results will also serve as further validation of model

  4. What is a mental/psychiatric disorder? From DSM-IV to DSM-V.

    Science.gov (United States)

    Stein, D J; Phillips, K A; Bolton, D; Fulford, K W M; Sadler, J Z; Kendler, K S

    2010-11-01

    The distinction between normality and psychopathology has long been subject to debate. DSM-III and DSM-IV provided a definition of mental disorder to help clinicians address this distinction. As part of the process of developing DSM-V, researchers have reviewed the concept of mental disorder and emphasized the need for additional work in this area. Here we review the DSM-IV definition of mental disorder and propose some changes. The approach taken here arguably takes a middle course through some of the relevant conceptual debates. We agree with the view that no definition perfectly specifies precise boundaries for the concept of mental/psychiatric disorder, but in line with a view that the nomenclature can improve over time, we aim here for a more scientifically valid and more clinically useful definition.

  5. Modeling the Soul Surface Seal from a Filtration Perspective

    Directory of Open Access Journals (Sweden)

    N.M. Somaratne

    1998-01-01

    Full Text Available A physically based model of soil surface scaling is proposed. The governing equations are formulated on the principle of conservation of mass assuming Darcy's law applies to suspension flowing through the soil surface. The model incorporates the physics of surface sealing by mechanisms that capture suspended particles moving with infiltrating water. As a result of particle retention in the soil system, the intrinsic porosity is reduced and hulk density is increased, resulting in changes to soil hydraulic properties such as moisture retention and hydraulic conductivity. Empirical functions are developed to describe the changes of these properties as the seal develops. With this approach, the seal can be mathematically described by well defined initial and boundary conditions and transient seal properties can be simulated in a physically realistic manner.

  6. Scattering of surface waves modelled by the integral equation method

    Science.gov (United States)

    Lu, Laiyu; Maupin, Valerie; Zeng, Rongsheng; Ding, Zhifeng

    2008-09-01

    The integral equation method is used to model the propagation of surface waves in 3-D structures. The wavefield is represented by the Fredholm integral equation, and the scattered surface waves are calculated by solving the integral equation numerically. The integration of the Green's function elements is given analytically by treating the singularity of the Hankel function at R = 0, based on the proper expression of the Green's function and the addition theorem of the Hankel function. No far-field and Born approximation is made. We investigate the scattering of surface waves propagating in layered reference models imbedding a heterogeneity with different density, as well as Lamé constant contrasts, both in frequency and time domains, for incident plane waves and point sources.

  7. Wetting and free surface flow modeling for potting and encapsulation.

    Energy Technology Data Exchange (ETDEWEB)

    Brooks, Carlton, F.; Brooks, Michael J. (Los Alamos National Laboratory, Los Alamos, NM); Graham, Alan Lyman (Los Alamos National Laboratory, Los Alamos, NM); Noble, David F. (David Frederick) (.; )); Notz, Patrick K.; Hopkins, Matthew Morgan; Castaneda, Jaime N.; Mahoney, Leo James (Kansas City Plant, Kansas City, MO); Baer, Thomas A.; Berchtold, Kathryn (Los Alamos National Laboratory, Los Alamos, NM); Adolf, Douglas Brian; Wilkes, Edward Dean; Rao, Rekha Ranjana; Givler, Richard C.; Sun, Amy Cha-Tien; Cote, Raymond O.; Mondy, Lisa Ann; Grillet, Anne Mary; Kraynik, Andrew Michael

    2007-06-01

    As part of an effort to reduce costs and improve quality control in encapsulation and potting processes the Technology Initiative Project ''Defect Free Manufacturing and Assembly'' has completed a computational modeling study of flows representative of those seen in these processes. Flow solutions are obtained using a coupled, finite-element-based, numerical method based on the GOMA/ARIA suite of Sandia flow solvers. The evolution of the free surface is solved with an advanced level set algorithm. This approach incorporates novel methods for representing surface tension and wetting forces that affect the evolution of the free surface. In addition, two commercially available codes, ProCAST and MOLDFLOW, are also used on geometries representing encapsulation processes at the Kansas City Plant. Visual observations of the flow in several geometries are recorded in the laboratory and compared to the models. Wetting properties for the materials in these experiments are measured using a unique flowthrough goniometer.

  8. Computational model of surface ablation from tokamak disruptions

    International Nuclear Information System (INIS)

    Ehst, D.; Hassanein, A.

    1993-10-01

    Energy transfer to material surfaces is dominated by photon radiation through low temperature plasma vapors if tokamak disruptions are due to low kinetic energy particles ( < 100 eV). Simple models of radiation transport are derived and incorporated into a fast-running computer routine to model this process. The results of simulations are in fair agreement with plasma gun erosion tests on several metal targets

  9. Optimized Model Surfaces for Advanced Atomic Force Microscopy Studies of Surface Nanobubbles.

    Science.gov (United States)

    Song, Bo; Zhou, Yi; Schönherr, Holger

    2016-11-01

    The formation of self-assembled monolayers (SAMs) of binary mixtures of 16-mercaptohexadecanoic acid (MHDA) and 1-octadecanethiol (ODT) on ultraflat template-stripped gold (TSG) surfaces was systematically investigated to clarify the assembly behavior, composition, and degree of possible phase segregation in light of atomic force microscopy (AFM) studies of surface nanobubbles on these substrates. The data for SAMs on TSG were compared to those obtained by adsorption on rough evaporated gold, as reported in a previous study. Quartz crystal microbalance and surface plasmon resonance data acquired in situ on TSG indicate that similar to SAM formation on conventional evaporated gold substrates ODT and MHDA form monolayers and bilayers, respectively. The second layer on MHDA, whose formation is attributed to hydrogen bonding, can be easily removed by adequate rinsing with water. The favorable agreement of the grazing incidence reflection Fourier transform infrared (GIR FTIR) spectroscopy and contact angle data analyzed with the Israelachvili-Gee model suggests that the binary SAMs do not segregate laterally. This conclusion is fully validated by high-resolution friction force AFM observations down to a length scale of 8-10 nm, which is much smaller than the typical observed surface nanobubble radii. Finally, correspondingly functionalized TSG substrates are shown to be valuable supports for studying surface nanobubbles by AFM in water and for addressing the relation between surface functionality and nanobubble formation and properties.

  10. Models for prediction of global solar radiation on horizontal surface ...

    African Journals Online (AJOL)

    The estimation of global solar radiation continues to play a fundamental role in solar engineering systems and applications. This paper compares various models for estimating the average monthly global solar radiation on horizontal surface for Akure, Nigeria, using solar radiation and sunshine duration data covering years ...

  11. Surface-complexation modelling for describing adsorption of ...

    African Journals Online (AJOL)

    2013-06-08

    Jun 8, 2013 ... Adsorption of dissolved phosphate onto synthetic hydrous ferric oxide (HFO) was measured in the laboratory as a function of pH, ionic strength, and phosphate relative concentration. Experimental data were used to constrain optimal values of surface complexation reactions using a geochemical modeling ...

  12. Modeling marine surface microplastic transport to assess optimal removal locations

    NARCIS (Netherlands)

    Sherman, Peter; Van Sebille, Erik

    2016-01-01

    Marine plastic pollution is an ever-increasing problem that demands immediate mitigation and reduction plans. Here, a model based on satellite-tracked buoy observations and scaled to a large data set of observations on microplastic from surface trawls was used to simulate the transport of plastics

  13. Remote sensing estimates of impervious surfaces for pluvial flood modelling

    DEFF Research Database (Denmark)

    Kaspersen, Per Skougaard; Drews, Martin

    This paper investigates the accuracy of medium resolution (MR) satellite imagery in estimating impervious surfaces for European cities at the detail required for pluvial flood modelling. Using remote sensing techniques enables precise and systematic quantification of the influence of the past 30...

  14. Infrared Analysis Of Enzymes Adsorbed Onto Model Surfaces

    Science.gov (United States)

    Story, Gloria M.; Rauch, Deborah S.; Brode, Philip F.; Marcott, Curtis A.

    1989-12-01

    The adsorption of the enzymes, subtilisin BPN' and lysozyme, onto model surfaces was examined using attenuated total reflectance (ATR) infrared (IR) spectroscopy. Using a cylindrical internal reflection (CIRcle) cell with a Germanium (Ge) internal reflection element (IRE), model hydrophilic surfaces were made by plasma cleaning the IRE and model hydrophobic surfaces were made by precoating the IRE with a thin film of polystyrene. Gas chromatography (GC)-IR data collection software was used to monitor adsorption kinetics during the first five minutes after injection of the enzyme into the CIRcle cell. It was found that for both lysozyme and BPN', most of the enzyme that was going to adsorb onto the model surface did so within ten seconds after injection. Nearly an order-of-magnitude more BPN' adsorbed on the hydrophobic Ge surface than the hydrophilic one, while lysozyme adsorbed somewhat more strongly to the hydrophilic Ge surface. Overnight, the lysozyme layer continued to increase in thickness, while BPN' maintained its initial coverage. The appearance of carboxylate bands in some of the adsorbed BPN' spectra suggests the occurrence of peptide bond hydrolysis. A Au/Pd coating on the CIRcle cell o-rings had a significant effect on the adsorption of BPN'. (This coating was applied in an attempt to eliminate interfering Teflon absorption bands.) An apparent electrochemical reaction occurred, involving BPN', Ge, Au/Pd, and the salt solution used to stabilize BPN'. The result of this reaction was enhanced adsorption of the enzyme around the coated o-rings, etching of the Ge IRE at the o-ring site, and some autolysis of the enzyme. No such reaction was observed with lysozyme.

  15. Soliton surfaces associated with sigma models: differential and algebraic aspects

    International Nuclear Information System (INIS)

    Goldstein, P P; Grundland, A M; Post, S

    2012-01-01

    In this paper, we consider both differential and algebraic properties of surfaces associated with sigma models. It is shown that surfaces defined by the generalized Weierstrass formula for immersion for solutions of the CP N-1 sigma model with finite action, defined in the Riemann sphere, are themselves solutions of the Euler–Lagrange equations for sigma models. On the other hand, we show that the Euler–Lagrange equations for surfaces immersed in the Lie algebra su(N), with conformal coordinates, that are extremals of the area functional, subject to a fixed polynomial identity, are exactly the Euler–Lagrange equations for sigma models. In addition to these differential constraints, the algebraic constraints, in the form of eigenvalues of the immersion functions, are systematically treated. The spectrum of the immersion functions, for different dimensions of the model, as well as its symmetry properties and its transformation under the action of the ladder operators are discussed. Another approach to the dynamics is given, i.e. description in terms of the unitary matrix which diagonalizes both the immersion functions and the projectors constituting the model. (paper)

  16. Information Flow Scheduling in Concurrent Multi-Product Development Based on DSM

    Science.gov (United States)

    Sun, Qing-Chao; Huang, Wei-Qiang; Jiang, Ying-Jie; Sun, Wei

    2017-09-01

    Multi-product collaborative development is adopted widely in manufacturing enterprise, while the present multi-project planning models don't take technical/data interactions of multiple products into account. To decrease the influence of technical/data interactions on project progresses, the information flow scheduling models based on the extended DSM is presented. Firstly, information dependencies are divided into four types: series, parallel, coupling and similar. Secondly, different types of dependencies are expressed as DSM units, and the extended DSM model is brought forward, described as a block matrix. Furthermore, the information flow scheduling methods is proposed, which involves four types of operations, where partitioning and clustering algorithm are modified from DSM for ensuring progress of high-priority project, merging and converting is the specific computation of the extended DSM. Finally, the information flow scheduling of two machine tools development is analyzed with example, and different project priorities correspond to different task sequences and total coordination cost. The proposed methodology provides a detailed instruction for information flow scheduling in multi-product development, with specially concerning technical/data interactions.

  17. Somatoform disorders and rheumatic diseases: from DSM-IV to DSM-V.

    Science.gov (United States)

    Alciati, A; Atzeni, F; Sgiarovello, P; Sarzi-Puttini, P

    2014-06-06

    Medically unexplained symptoms are considered 'somatoform disorders' in the fourth edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM-IV). The introduction of this nosographic category has been helpful in drawing attention to a previously neglected area, but has not been successful in promoting an understanding of the disorders' biological basis and treatment implications, probably because of a series of diagnostic shortcomings. The newly proposed DSM-V diagnostic criteria try to overcome the limitations of the DSM-IV definition, which was organised centrally around the concept of medically unexplained symptoms, by emphasising the extent to which a patient's thoughts, feelings and behaviours concerning their somatic symptoms are disproportionate or excessive. This change is supported by a growing body of evidence showing that psychological and behavioural features play a major role in causing patient disability and maintaining high level of health care use. Pain disorders is the sub-category of DSM-IV somatoform disorders that most closely resembles fibromyalgia. Regardless of the diagnostic changes recently brought about by DSM-V, neuroimaging studies have identified important components of the mental processes associated with a DSM- IV diagnosis of pain disorder.

  18. Somatoform disorders and rheumatic diseases: from DSM-IV to DSM-V

    Directory of Open Access Journals (Sweden)

    A. Alciati

    2014-06-01

    Full Text Available Medically unexplained symptoms are considered ‘somatoform disorders’ in the fourth edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM-IV. The introduction of this nosographic category has been helpful in drawing attention to a previously neglected area, but has not been successful in promoting an understanding of the disorders’ biological basis and treatment implications, probably because of a series of diagnostic shortcomings. The newly proposed DSM-V diagnostic criteria try to overcome the limitations of the DSM-IV definition, which was organised centrally around the concept of medically unexplained symptoms, by emphasising the extent to which a patient’s thoughts, feelings and behaviours concerning their somatic symptoms are disproportionate or excessive. This change is supported by a growing body of evidence showing that psychological and behavioural features play a major role in causing patient disability and maintaining high level of health care use. Pain disorders is the sub-category of DSM-IV somatoform disorders that most closely resembles fibromyalgia. Regardless of the diagnostic changes recently brought about by DSM-V, neuroimaging studies have identified important components of the mental processes associated with a DSM- IV diagnosis of pain disorder.

  19. Complete genome sequence of the photoautotrophic and bacteriochlorophyll e-synthesizing green sulfur bacterium Chlorobaculum limnaeum DSM 1677T

    DEFF Research Database (Denmark)

    Tank, Marcus; Liu, Zhenfeng; Frigaard, Niels-Ulrik

    2017-01-01

    Chlorobaculum limnaeum DSM 1677T is a mesophilic, brown-colored, chlorophototrophic green sulfur bacterium that produces bacteriochlorophyll e and the carotenoid isorenieratene as major pigments. This bacterium serves as a model organism in molecular research on photosynthesis, sulfur metabolism...

  20. Reliability and validity of the DSM-IV-TR and proposed DSM-5 criteria for pedophilia: Implications for the ICD-11 and the next DSM.

    Science.gov (United States)

    Seto, Michael C; Fedoroff, J Paul; Bradford, John M; Knack, Natasha; Rodrigues, Nicole C; Curry, Susan; Booth, Brad; Gray, Jonathan; Cameron, Colin; Bourget, Dominique; Messina, Sarina; James, Elizabeth; Watson, Diane; Gulati, Sanjiv; Balmaceda, Rufino; Ahmed, Adekunle G

    We tested the inter-rater reliability and criterion-related validity of the DSM-IV-TR pedophilia diagnosis and proposed DSM-5 pedohebephilia diagnosis in a sample of 79 men who had committed child pornography offenses, contact sexual offenses against children, or who were referred because of concerns about whether they had a sexual interest in children. Participants were evaluated by two independent psychiatrists with an interview and questionnaire regarding demographic characteristics, sexual history, and self-reported sexual interests; they also completed phallometric and visual reaction time testing. Kappa was .59 for ever meeting DSM-IV-TR criteria for pedophilia and .52 for ever meeting the proposed DSM-5 criteria for pedohebephilia. Ever meeting DSM-IV-TR diagnosis was significantly related to self-reported index of sexual interest in children (highest AUC=.81, 95% CI=.70-.91, pDSM-5 "diagnosis" was similarly related to self-report (AUC=.84, 95% CI=.74-.94, pDSM-5 criteria, we believe these results suggest the revision of DSM-5 and development of ICD-11 could benefit from drawing on the current DSM-5 criteria, which are essentially the same as DSM-IV-TR except for a distinction between having a paraphilia (the interest) and a paraphilic disorder (the paraphilia plus clinically significant distress or impairment). Copyright © 2016. Published by Elsevier Ltd.

  1. Exploring the Proposed DSM-5 Criteria in a Clinical Sample

    Science.gov (United States)

    Taheri, Azin; Perry, Adrienne

    2012-01-01

    The proposed DSM-5 criteria for Autism Spectrum Disorder (ASD) depart substantially from the previous DSM-IV criteria. In this file review study of 131 children aged 2-12, previously diagnosed with either Autistic Disorder or Pervasive Developmental Disorder-Not Otherwise Specified (PDD-NOS), 63% met the new DSM-5 ASD criteria, including 81%…

  2. Panic Disorder and Agoraphobia: Considerations for DSM-V

    Science.gov (United States)

    Schmidt, Norman B.; Norr, Aaron M.; Korte, Kristina J.

    2014-01-01

    With the upcoming release of the fifth edition of the "Diagnostic and Statistical Manual of Mental Disorders" (DSM-V) there has been a necessary critique of the DSM-IV including questions regarding how to best improve the next iteration of the DSM classification system. The aim of this article is to provide commentary on the probable…

  3. Soil Structure - A Neglected Component of Land-Surface Models

    Science.gov (United States)

    Fatichi, S.; Or, D.; Walko, R. L.; Vereecken, H.; Kollet, S. J.; Young, M.; Ghezzehei, T. A.; Hengl, T.; Agam, N.; Avissar, R.

    2017-12-01

    Soil structure is largely absent in most standard sampling and measurements and in the subsequent parameterization of soil hydraulic properties deduced from soil maps and used in Earth System Models. The apparent omission propagates into the pedotransfer functions that deduce parameters of soil hydraulic properties primarily from soil textural information. Such simple parameterization is an essential ingredient in the practical application of any land surface model. Despite the critical role of soil structure (biopores formed by decaying roots, aggregates, etc.) in defining soil hydraulic functions, only a few studies have attempted to incorporate soil structure into models. They mostly looked at the effects on preferential flow and solute transport pathways at the soil profile scale; yet, the role of soil structure in mediating large-scale fluxes remains understudied. Here, we focus on rectifying this gap and demonstrating potential impacts on surface and subsurface fluxes and system wide eco-hydrologic responses. The study proposes a systematic way for correcting the soil water retention and hydraulic conductivity functions—accounting for soil-structure—with major implications for near saturated hydraulic conductivity. Modification to the basic soil hydraulic parameterization is assumed as a function of biological activity summarized by Gross Primary Production. A land-surface model with dynamic vegetation is used to carry out numerical simulations with and without the role of soil-structure for 20 locations characterized by different climates and biomes across the globe. Including soil structure affects considerably the partition between infiltration and runoff and consequently leakage at the base of the soil profile (recharge). In several locations characterized by wet climates, a few hundreds of mm per year of surface runoff become deep-recharge accounting for soil-structure. Changes in energy fluxes, total evapotranspiration and vegetation productivity

  4. Source Surface Models and Their Impact on Solar Wind Research

    Science.gov (United States)

    Sokolov, I. V.; Roussev, I. I.; Gombosi, T. I.; Liu, Y.

    2005-05-01

    To perform realistic modeling of the important processes in the solar corona, such as coronal mass ejections, flares, as well as the acceleration of solar particles, one needs to incorporate into the physical models any complicated pattern of the coronal magnetic field. The coronal magnetic field topology is determined by the helmet streamers (with closed field lines), the coronal holes (with open field lines) as well as the fine, but crucially important, details of the small-scale active regions. The standard practice to recover the global 3-D structure of the solar magnetic field from observations is to use the source surface model, in which the field is assumed to be potential, i.e., current-free. This approach ignores any volumetric current there may be present in the corona, and also neglects the existence of the equatorial current sheet, which starts from a height of 3-5 Rs above the solar surface. The fully potential solar magnetic field would have only closed field lines, not allowing for the solar wind to exist. In our Solar Corona model, incorparated into the Space Weather Modelling Framework, the solar magnetic field is split into two constituitive parts: one potential part which is recovered from the magnetic field data (e.g., from WSO, MWO, or MDI data) using the source surface method; and, one other non-potential part. For the potential field, we keep only the spherical harmonics decreasing with distance from the Sun or, equivalently, we use a very large value of the source surface radius. For the non-potential field, we solve the time-dependent induction equation with zero boundary condition at the solar surface. The full set of conservation laws for the MHD system is solved numerically using the BATS-R-US code. To power the solar wind in our model, we use a phenomenological turbulence model described in an earlier paper. The resulting steady-state MHD solution includes the well-resolved current sheet and helmet streamers. The modeled structure of

  5. Flood Damage Analysis: First Floor Elevation Uncertainty Resulting from LiDAR-Derived Digital Surface Models

    Directory of Open Access Journals (Sweden)

    José María Bodoque

    2016-07-01

    Full Text Available The use of high resolution ground-based light detection and ranging (LiDAR datasets provides spatial density and vertical precision for obtaining highly accurate Digital Surface Models (DSMs. As a result, the reliability of flood damage analysis has improved significantly, owing to the increased accuracy of hydrodynamic models. In addition, considerable error reduction has been achieved in the estimation of first floor elevation, which is a critical parameter for determining structural and content damages in buildings. However, as with any discrete measurement technique, LiDAR data contain object space ambiguities, especially in urban areas where the presence of buildings and the floodplain gives rise to a highly complex landscape that is largely corrected by using ancillary information based on the addition of breaklines to a triangulated irregular network (TIN. The present study provides a methodological approach for assessing uncertainty regarding first floor elevation. This is based on: (i generation an urban TIN from LiDAR data with a density of 0.5 points·m−2, complemented with the river bathymetry obtained from a field survey with a density of 0.3 points·m−2. The TIN was subsequently improved by adding breaklines and was finally transformed to a raster with a spatial resolution of 2 m; (ii implementation of a two-dimensional (2D hydrodynamic model based on the 500-year flood return period. The high resolution DSM obtained in the previous step, facilitated addressing the modelling, since it represented suitable urban features influencing hydraulics (e.g., streets and buildings; and (iii determination of first floor elevation uncertainty within the 500-year flood zone by performing Monte Carlo simulations based on geostatistics and 1997 control elevation points in order to assess error. Deviations in first floor elevation (average: 0.56 m and standard deviation: 0.33 m show that this parameter has to be neatly characterized in order

  6. Spatial aggregation of land surface characteristics : impact of resolution of remote sensing data on land surface modelling

    NARCIS (Netherlands)

    Pelgrum, H.

    2000-01-01

    Land surface models describe the exchange of heat, moisture and momentum between the land surface and the atmosphere. These models can be solved regionally using remote sensing measurements as input. Input variables which can be derived from remote sensing measurements are surface albedo,

  7. Multipoint contact modeling of nanoparticle manipulation on rough surface

    Energy Technology Data Exchange (ETDEWEB)

    Zakeri, M., E-mail: m.zakeri@tabrizu.ac.ir; Faraji, J.; Kharazmi, M. [University of Tabriz, School of Engineering Emerging Technologies (Iran, Islamic Republic of)

    2016-12-15

    In this paper, the atomic force microscopy (AFM)-based 2-D pushing of nano/microparticles investigated on rough substrate by assuming a multipoint contact model. First, a new contact model was extracted and presented based on the geometrical profiles of Rumpf, Rabinovich and George models and the contact mechanics theories of JKR and Schwartz, to model the adhesion forces and the deformations in the multipoint contact of rough surfaces. The geometry of a rough surface was defined by two main parameters of asperity height (size of roughness) and asperity wavelength (compactness of asperities distribution). Then, the dynamic behaviors of nano/microparticles with radiuses in range of 50–500 nm studied during their pushing on rough substrate with a hexagonal or square arrangement of asperities. Dynamic behavior of particles were simulated and compared by assuming multipoint and single-point contact schemes. The simulation results show that the assumption of multipoint contact has a considerable influence on determining the critical manipulation force. Additionally, the assumption of smooth surfaces or single-point contact leads to large error in the obtained results. According to the results of previous research, it anticipated that a particles with the radius less than about 550 nm start to slide on smooth substrate; but by using multipoint contact model, the predicted behavior changed, and particles with radii of smaller than 400 nm begin to slide on rough substrate for different height of asperities, at first.

  8. Comparison of ICD-10R, DSM-IV-TR and DSM-5 in an Adult Autism Spectrum Disorder Diagnostic Clinic

    Science.gov (United States)

    Wilson, C. Ellie; Gillan, Nicola; Spain, Deborah; Robertson, Dene; Roberts, Gedeon; Murphy, Clodagh M.; Maltezos, Stefanos; Zinkstok, Janneke; Johnston, Katie; Dardani, Christina; Ohlsen, Chris; Deeley, P. Quinton; Craig, Michael; Mendez, Maria A.; Happé, Francesca; Murphy, Declan G. M.

    2013-01-01

    An Autism Spectrum Disorder (ASD) diagnosis is often used to access services. We investigated whether ASD diagnostic outcome varied when DSM-5 was used compared to ICD-10R and DSM-IV-TR in a clinical sample of 150 intellectually able adults. Of those diagnosed with an ASD using ICD-10R, 56% met DSM-5 ASD criteria. A further 19% met DSM-5 (draft)…

  9. Evaluation of the WAMME model surface fluxes using results from the AMMA land-surface model intercomparison project

    Energy Technology Data Exchange (ETDEWEB)

    Boone, Aaron Anthony [GAME-CNRM, Meteo-France, Toulouse (France); Poccard-Leclercq, Isabelle [Universite de Nantes, LETG-Geolittomer, Nantes (France); Xue, Yongkang; Feng, Jinming [University of California at Los Angeles, Los Angeles, CA (United States); Rosnay, Patricia de [European Centre for Medium Range Weather Forecasting, Reading (United Kingdom)

    2010-07-15

    The West African monsoon (WAM) circulation and intensity have been shown to be influenced by the land surface in numerous numerical studies using regional scale and global scale atmospheric climate models (RCMs and GCMs, respectively) over the last several decades. The atmosphere-land surface interactions are modulated by the magnitude of the north-south gradient of the low level moist static energy, which is highly correlated with the steep latitudinal gradients of the vegetation characteristics and coverage, land use, and soil properties over this zone. The African Multidisciplinary Monsoon Analysis (AMMA) has organised comprehensive activities in data collection and modelling to further investigate the significance land-atmosphere feedbacks. Surface energy fluxes simulated by an ensemble of land surface models from AMMA Land-surface Model Intercomparison Project (ALMIP) have been used as a proxy for the best estimate of the ''real world'' values in order to evaluate GCM and RCM simulations under the auspices of the West African Monsoon Modelling Experiment (WAMME) project, since such large-scale observations do not exist. The ALMIP models have been forced in off-line mode using forcing based on a mixture of satellite, observational, and numerical weather prediction data. The ALMIP models were found to agree well over the region where land-atmosphere coupling is deemed to be most important (notably the Sahel), with a high signal to noise ratio (generally from 0.7 to 0.9) in the ensemble and a inter-model coefficient of variation between 5 and 15%. Most of the WAMME models simulated spatially averaged net radiation values over West Africa which were consistent with the ALMIP estimates, however, the partitioning of this energy between sensible and latent heat fluxes was significantly different: WAMME models tended to simulate larger (by nearly a factor of two) monthly latent heat fluxes than ALMIP. This results due to a positive precipitation

  10. Models of the solvent-accessible surface of biopolymers

    Energy Technology Data Exchange (ETDEWEB)

    Smith, R.E.

    1996-09-01

    Many biopolymers such as proteins, DNA, and RNA have been studied because they have important biomedical roles and may be good targets for therapeutic action in treating diseases. This report describes how plastic models of the solvent-accessible surface of biopolymers were made. Computer files containing sets of triangles were calculated, then used on a stereolithography machine to make the models. Small (2 in.) models were made to test whether the computer calculations were done correctly. Also, files of the type (.stl) required by any ISO 9001 rapid prototyping machine were written onto a CD-ROM for distribution to American companies.

  11. Numerical modelling of surface hydrology and near-surface hydrogeology at Forsmark. Site descriptive modelling SDM. Site Forsmark

    International Nuclear Information System (INIS)

    Bosson, Emma; Gustafsson, Lars-Goeran; Sassner, Mona

    2008-09-01

    SKB is currently performing site investigations at two potential sites for a final repository for spent nuclear fuel. This report presents results of water flow and solute transport modelling of the Forsmark site. The modelling reported in this document focused on the near-surface groundwater, i.e. groundwater in Quaternary deposits and shallow rock, and surface water systems, and was performed using the MIKE SHE tool. The most recent site data used in the modelling were delivered in the Forsmark 2.3 dataset, which had its 'data freeze' on March 31, 2007. The present modelling is performed in support of the final version of the Forsmark site description that is produced during the site investigation phase. In this work, the hydrological modelling system MIKE SHE has been used to describe near-surface groundwater flow and the contact between groundwater and surface water at the Forsmark site. The surface water system at Forsmark is described with the one-dimensional 'channel flow' modelling tool MIKE 11, which is fully and dynamically integrated with MIKE SHE. The MIKE SHE model was updated with data from the F2.3 data freeze. The main updates concerned the geological description of the saturated zone and the time series data on water levels and surface water discharges. The time series data used as input data and for calibration and validation was extended until the Forsmark 2.3 data freeze (March 31, 2007). The present work can be subdivided into the following four parts: 1. Update of the numerical flow model. 2. Sensitivity analysis and calibration of the model parameters. 3. Validation of the calibrated model, followed by evaluation and identification of discrepancies between measurements and model results. 4. Additional sensitivity analysis and calibration in order to resolve the problems identified in point three above. The main actions taken during the calibration can be summarised as follows: 1. The potential evapotranspiration was reduced in order to reach

  12. Modeling of laser damage initiated by surface contamination

    International Nuclear Information System (INIS)

    Feit, M.D.; Rubenchik, A.M.; Faux, D.R.; Riddle, R.A.; Shapiro, A.; Eder, D.C.; Penetrante, B.M.; Milam, D.; Genin, F.Y.; Kozlowski, M.R.

    1996-11-01

    The authors are engaged in a comprehensive effort to understand and model the initiation and growth of laser damage initiated by surface contaminants. This includes, for example, the initial absorption by the contaminant, heating and plasma generation, pressure and thermal loading of the transparent substrate, and subsequent shockwave propagation, 'splashing' of molten material and possible spallation, optical propagation and scattering, and treatment of material fracture. The integration use of large radiation hydrodynamics codes, optical propagation codes and material strength codes enables a comprehensive view of the damage process The following picture of surface contaminant initiated laser damage is emerging from our simulations

  13. Surface Complexation Modelling in Metal-Mineral-Bacteria Systems

    Science.gov (United States)

    Johnson, K. J.; Fein, J. B.

    2002-12-01

    The reactive surfaces of bacteria and minerals can determine the fate, transport, and bioavailability of aqueous heavy metal cations. Geochemical models are instrumental in accurately accounting for the partitioning of the metals between mineral surfaces and bacteria cell walls. Previous research has shown that surface complexation modelling (SCM) is accurate in two-component systems (metal:mineral and metal:bacteria); however, the ability of SCMs to account for metal distribution in mixed metal-mineral-bacteria systems has not been tested. In this study, we measure aqueous Cd distributions in water-bacteria-mineral systems, and compare these observations with predicted distributions based on a surface complexation modelling approach. We measured Cd adsorption in 2- and 3-component batch adsorption experiments. In the 2-component experiments, we measured the extent of adsorption of 10 ppm aqueous Cd onto either a bacterial or hydrous ferric oxide sorbent. The metal:bacteria experiments contained 1 g/L (wet wt.) of B. subtilis, and were conducted as a function of pH; the metal:mineral experiments were conducted as a function of both pH and HFO content. Two types of 3-component Cd adsorption experiments were also conducted in which both mineral powder and bacteria were present as sorbents: 1) one in which the HFO was physically but not chemically isolated from the system using sealed dialysis tubing, and 2) others where the HFO, Cd and B. subtilis were all in physical contact. The dialysis tubing approach enabled the direct determination of the concentration of Cd on each sorbing surface, after separation and acidification of each sorbent. The experiments indicate that both bacteria and mineral surfaces can dominate adsorption in the system, depending on pH and bacteria:mineral ratio. The stability constants, determined using the data from the 2-component systems, along with those for other surface and aqueous species in the systems, were used with FITEQL to

  14. ELECTRON AVALANCHE MODEL OF DIELECTRIC-VACUUM SURFACE BREAKDOWN

    Energy Technology Data Exchange (ETDEWEB)

    Lauer, E J

    2007-02-21

    The model assumes that an 'initiating event' results in positive ions on the surface near the anode and reverses the direction of the normal component of electric field so that electrons in vacuum are attracted to the dielectric locally. A sequence of surface electron avalanches progresses in steps from the anode to the cathode. For 200 kV across 1 cm, the spacing of avalanches is predicted to be about 13 microns. The time for avalanches to step from the anode to the cathode is predicted to be about a ns.

  15. Advances in land modeling of KIAPS based on the Noah Land Surface Model

    Science.gov (United States)

    Koo, Myung-Seo; Baek, Sunghye; Seol, Kyung-Hee; Cho, Kyoungmi

    2017-08-01

    As of 2013, the Noah Land Surface Model (LSM) version 2.7.1 was implemented in a new global model being developed at the Korea Institute of Atmospheric Prediction Systems (KIAPS). This land surface scheme is further refined in two aspects, by adding new physical processes and by updating surface input parameters. Thus, the treatment of glacier land, sea ice, and snow cover are addressed more realistically. Inconsistencies in the amount of absorbed solar flux at ground level by the land surface and radiative processes are rectified. In addition, new parameters are available by using 1-km land cover data, which had usually not been possible at a global scale. Land surface albedo/emissivity climatology is newly created using Moderate-Resolution Imaging Spectroradiometer (MODIS) satellitebased data and adjusted parameterization. These updates have been applied to the KIAPS-developed model and generally provide a positive impact on near-surface weather forecasting.

  16. Surface wind mixing in the Regional Ocean Modeling System (ROMS)

    Science.gov (United States)

    Robertson, Robin; Hartlipp, Paul

    2017-12-01

    Mixing at the ocean surface is key for atmosphere-ocean interactions and the distribution of heat, energy, and gases in the upper ocean. Winds are the primary force for surface mixing. To properly simulate upper ocean dynamics and the flux of these quantities within the upper ocean, models must reproduce mixing in the upper ocean. To evaluate the performance of the Regional Ocean Modeling System (ROMS) in replicating the surface mixing, the results of four different vertical mixing parameterizations were compared against observations, using the surface mixed layer depth, the temperature fields, and observed diffusivities for comparisons. The vertical mixing parameterizations investigated were Mellor- Yamada 2.5 level turbulent closure (MY), Large- McWilliams- Doney Kpp (LMD), Nakanishi- Niino (NN), and the generic length scale (GLS) schemes. This was done for one temperate site in deep water in the Eastern Pacific and three shallow water sites in the Baltic Sea. The model reproduced the surface mixed layer depth reasonably well for all sites; however, the temperature fields were reproduced well for the deep site, but not for the shallow Baltic Sea sites. In the Baltic Sea, the models overmixed the water column after a few days. Vertical temperature diffusivities were higher than those observed and did not show the temporal fluctuations present in the observations. The best performance was by NN and MY; however, MY became unstable in two of the shallow simulations with high winds. The performance of GLS nearly as good as NN and MY. LMD had the poorest performance as it generated temperature diffusivities that were too high and induced too much mixing. Further observational comparisons are needed to evaluate the effects of different stratification and wind conditions and the limitations on the vertical mixing parameterizations.

  17. Comparing methods for scoring personality disorder types using maladaptive traits in DSM-5.

    Science.gov (United States)

    Samuel, Douglas B; Hopwood, Christopher J; Krueger, Robert F; Thomas, Katherine M; Ruggero, Camilo J

    2013-06-01

    The DSM-5 (Diagnostic and Statistical Manual of Mental Disorders, 5th ed.) Section III will include an alternative hybrid system for the diagnosis of personality disorder (PD). This alternative system defines PD types partly through specific combinations of maladaptive traits, rather than by using a set of polythetic diagnostic criteria. The current report utilizes a large sample of undergraduates (n = 1,159) to examine three dimensional methods for comparing an individual's trait profile to each PD type. We found that the sum of an individual's scores on the assigned traits obtained large convergent correlations (Mdn r =.61) and best reproduced the patterns of PD discriminant correlations observed within the DSM-IV measure. We also tested the DSM-5 Section III model algorithms and compared them with different thresholds for assigning categorical diagnoses. Frequency rates using the algorithms were greatly reduced, whereas requiring half of the assigned traits produced rates that more closely approximated current prevalence estimates. Our research suggests that DSM-5 Section III trait model can reproduce the DSM-IV-TR PD constructs and identifies effective methods of doing so.

  18. Psychometric analysis of the new ADHD DSM-V derived symptoms.

    Science.gov (United States)

    Ghanizadeh, Ahmad

    2012-03-20

    Following the agreements on the reformulating and revising of ADHD diagnostic criteria, recently, the proposed revision for ADHD added 4 new symptoms to the hyperactivity and Impulsivity aspect in DSM-V. This study investigates the psychometric properties of the proposed ADHD diagnostic criteria. ADHD diagnosis was made according to DSM-IV. The parents completed the screening test of ADHD checklist of Child Symptom Inventory-4 and the 4 items describing the new proposed symptoms in DSM-V. The confirmatory factor analysis of the ADHD DSM-V derived items supports the loading of two factors including inattentiveness and hyperactivity/impulsivity. There is a sufficient reliability for the items. However, confirmatory factor analysis showed that the three-factor model is better fitted than the two-factor one. Moreover, the results of the exploratory analysis raised some concerns about the factor loading of the four new items. The current results support the two-factor model of the DSM-V ADHD diagnostic criteria including inattentiveness and hyperactivity/impulsivity. However, the four new items can be considered as a third factor.

  19. Thermodynamic Modeling of Surface Tension of Aqueous Electrolyte Solution by Competitive Adsorption Model

    Directory of Open Access Journals (Sweden)

    Mohamad Javad Kamali

    2015-01-01

    Full Text Available Thermodynamic modeling of surface tension of different electrolyte systems in presence of gas phase is studied. Using the solid-liquid equilibrium, Langmuir gas-solid adsorption, and ENRTL activity coefficient model, the surface tension of electrolyte solutions is calculated. The new model has two adjustable parameters which could be determined by fitting the experimental surface tension of binary aqueous electrolyte solution in single temperature. Then the values of surface tension for other temperatures in binary and ternary system of aqueous electrolyte solution are predicted. The average absolute deviations for calculation of surface tension of binary and mixed electrolyte systems by new model are 1.98 and 1.70%, respectively.

  20. Modeling of dust emission for a crusted surface

    Science.gov (United States)

    Ghodsi Zadeh, Z.; Klose, M.; DuBois, D. W.

    2017-12-01

    Dust storms are frequent phenomena in the southwestern United Sates. Dust source areas in the region are often (partly) crusted. A critical prerequisite in dust aerosol modeling is an accurate representation of dust emission. While several dust emission schemes have been developed over the last decades, their applicability for crusted surfaces is not well tested. In this study, we use and test the applicability of the dust emission scheme of Shao (2004) (S04), which estimates dust emission based on the soil volume removed by saltation particle impacts, to model dust emission from a crusted surface in New Mexico, USA, for three dust events in spring 2016. Detailed field data are available for these events which are used as scheme input (surface crust and vegetation fraction, friction velocity, minimally- and fully-dispersed particle-size distributions) and for evaluation (saltation flux and dust emission flux). Results show that the saltation flux modeled with the scheme of White (1979) was overestimated by three orders of magnitude. This is expected as the supply of particles available for saltation is limited at the site. As our focus is on dust emission, a constant scaling factor was applied to match modeled and observed saltation fluxes. Parameters that describe the efficiency of saltator impacts to emit dust and the degree of dispersion during erosion need to be adapted in the S04 scheme to represent the soil surface setting at the study site. Our results show that changing those parameters has little effect on the modeled dust emission and dust emission is generally underestimated when PSDs of the top 1 cm soil layer are used as it is common. The reason for this is that the crust at the site is relatively thin and the soil overall sandy, which results in only a small difference between the two PSDs. If, however, the minimally- and fully-dispersed PSDs are replaced with the PSDs of, respectively, loose erodible material and crust, then the difference increases

  1. DSM-5 Alcohol Use Disorder Severity in Puerto Rico: Prevalence, Criteria Profile, and Correlates.

    Science.gov (United States)

    Caetano, Raul; Gruenewald, Paul; Vaeth, Patrice A C; Canino, Glorisa

    2018-02-01

    Our aim was to examine lifetime criteria profiles and correlates of severity (mild, moderate, severe) of DSM-5 alcohol use disorders (AUD) in Puerto Rico. Data are from a household random sample of individuals 18 to 64 years of age in San Juan, Puerto Rico. The survey response rate was 83%. DSM-5 AUD was identified with the Spanish version of the World Health Organization's Composite International Diagnostic Interview. The analyses also identify correlates of each severity level using an ordered logistic regression model. The prevalence of lifetime DSM-5 AUD among men and women was 38 and 16%, respectively. Mild lifetime DSM-5 AUD was the most prevalent severity level among both men (18%) and women (9%). The most common criteria, independent of gender and severity level, were drinking larger quantities and for longer than planned (men range: 80 to 97%; women range: 78 to 91%) and hazardous use (men range: 56 to 91%; women range: 42 to 74%). Results from ordered logistic regression showed that the adjusted odds ratio for weekly drinking frequency, greater volume of alcohol consumed per drinking occasion, positive attitudes about drinking, drinking norms, and male gender invariantly increased risks across all DSM-5 AUD severity levels (mild, moderate, severe). Greater negative attitudes about drinking, low family cohesion, and Protestant religion were related to greater risks at higher AUD severity levels. AUD prevalence is high in San Juan, Puerto Rico. Prevalence rates for some criteria are equally high across severity levels and poorly differentiate between mild, moderate, or severe DSM-5 AUD. The sociodemographic and alcohol-related risks vary across DSM-5 severity levels. Copyright © 2018 by the Research Society on Alcoholism.

  2. Concordance of DSM-5 and DSM-IV-TR classifications for autism spectrum disorder.

    Science.gov (United States)

    Ohashi, Kei; Mizuno, Yoshifumi; Miyachi, Taishi; Asai, Tomoko; Imaeda, Masayuki; Saitoh, Shinji

    2015-12-01

    The fifth edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM-5) was published in May 2013. Autism spectrum disorder (ASD) has been structured for the three subtypes of pervasive developmental disorder (PDD), but the number of impairment in social and communication dimension is not stated. The subjects were 68 children who visited the Department of Psychology and Development at Nagoya City University Hospital for the first time between the ages of 6 and 15 years old. We retrospectively re-examined the subjects using DSM-IV-TR criteria and DSM-5 criteria with two rules (two of three and one of three on the social and communication dimension) and examined the concordance rate. Forty subjects were diagnosed with PDD, and 28 were not. The mean PDD subject age was 9.4 years, and mean IQ was 84.0 on the Wechsler Intelligence Scale for Children III or 62.7 on the Tanaka-Binet test. Twenty-seven (68%) of the PDD subjects were classified with ASD using DSM-5 criteria when the two of three rule was applied, while 32 (80%) were classified with ASD when the one of three rule was applied. All subjects without PDD were not diagnosed with ASD on DSM-5 criteria. DSM-5 criteria may exclude high functioning and older subjects from ASD because they tend to be atypical. The diagnostic procedure for DSM-5 criteria is ambiguous, especially in high functioning subjects and those diagnosed at an older age. © 2015 Japan Pediatric Society.

  3. Surface and Flow Field Measurements on the FAITH Hill Model

    Science.gov (United States)

    Bell, James H.; Heineck, James T.; Zilliac, Gregory; Mehta, Rabindra D.; Long, Kurtis R.

    2012-01-01

    A series of experimental tests, using both qualitative and quantitative techniques, were conducted to characterize both surface and off-surface flow characteristics of an axisymmetric, modified-cosine-shaped, wall-mounted hill named "FAITH" (Fundamental Aero Investigates The Hill). Two separate models were employed: a 6" high, 18" base diameter machined aluminum model that was used for wind tunnel tests and a smaller scale (2" high, 6" base diameter) sintered nylon version that was used in the water channel facility. Wind tunnel and water channel tests were conducted at mean test section speeds of 165 fps (Reynolds Number based on height = 500,000) and 0.1 fps (Reynolds Number of 1000), respectively. The ratio of model height to boundary later height was approximately 3 for both tests. Qualitative techniques that were employed to characterize the complex flow included surface oil flow visualization for the wind tunnel tests, and dye injection for the water channel tests. Quantitative techniques that were employed to characterize the flow included Cobra Probe to determine point-wise steady and unsteady 3D velocities, Particle Image Velocimetry (PIV) to determine 3D velocities and turbulence statistics along specified planes, Pressure Sensitive Paint (PSP) to determine mean surface pressures, and Fringe Imaging Skin Friction (FISF) to determine surface skin friction (magnitude and direction). This initial report summarizes the experimental set-up, techniques used, data acquired and describes some details of the dataset that is being constructed for use by other researchers, especially the CFD community. Subsequent reports will discuss the data and their interpretation in more detail

  4. Applying DSM evaluation results to utility planning

    Energy Technology Data Exchange (ETDEWEB)

    Baxter, L.W.

    1995-07-01

    This paper describes the results of a study to assess the application of DSM evaluation results to utility forecasting and planning. The paper has three objectives: (1) identify forecasting and planning applications of evaluation studies, (2) identify major obstacles and problems associated with applying evaluation results to forecasting and planning, and (3) suggest approaches to address the major problems. The paper summarizes results from interviews with utilities, regulators, and consultants to determine how the utility industry currently applies evaluation results in forecasting and planning. The paper also includes results from a detailed case study of Sacramento Municipal Utility District (SMUD) and Southern California Edison Company (SCE), two utilities with large DSM programs and active evaluation efforts.

  5. The DSM diagnostic criteria for dyspareunia.

    Science.gov (United States)

    Binik, Yitzchak M

    2010-04-01

    The DSM-IV-TR attempted to create a unitary category of dyspareunia based on the criterion of genital pain that interfered with sexual intercourse. This classificatory emphasis of interference with intercourse is reviewed and evaluated from both theoretical and empirical points of view. Neither of these points of view was found to support the notion of dyspareunia as a unitary disorder or its inclusion in the DSM-V as a sexual dysfunction. It seems highly likely that there are different syndromes of dyspareunia and that what is currently termed "superficial dyspareunia" cannot be differentiated reliably from vaginismus. It is proposed that the diagnoses of vaginismus and dyspareunia be collapsed into a single diagnostic entity called genito-pelvic pain/penetration disorder. This diagnostic category is defined according to five dimensions: percentage success of vaginal penetration; pain with vaginal penetration; fear of vaginal penetration or of genito-pelvic pain during vaginal penetration; pelvic floor muscle dysfunction; medical co-morbidity.

  6. The DSM diagnostic criteria for vaginismus.

    Science.gov (United States)

    Binik, Yitzchak M

    2010-04-01

    Vaginal spasm has been considered the defining diagnostic characteristic of vaginismus for approximately 150 years. This remarkable consensus, based primarily on expert clinical opinion, is preserved in the DSM-IV-TR. The available empirical research, however, does not support this definition nor does it support the validity of the DSM-IV-TR distinction between vaginismus and dyspareunia. The small body of research concerning other possible ways or methods of diagnosing vaginismus is critically reviewed. Based on this review, it is proposed that the diagnoses of vaginismus and dyspareunia be collapsed into a single diagnostic entity called "genito-pelvic pain/penetration disorder." This diagnostic category is defined according to the following five dimensions: percentage success of vaginal penetration; pain with vaginal penetration; fear of vaginal penetration or of genito-pelvic pain during vaginal penetration; pelvic floor muscle dysfunction; medical co-morbidity.

  7. Modeling marine surface microplastic transport to assess optimal removal locations

    International Nuclear Information System (INIS)

    Sherman, Peter; Van Sebille, Erik

    2016-01-01

    Marine plastic pollution is an ever-increasing problem that demands immediate mitigation and reduction plans. Here, a model based on satellite-tracked buoy observations and scaled to a large data set of observations on microplastic from surface trawls was used to simulate the transport of plastics floating on the ocean surface from 2015 to 2025, with the goal to assess the optimal marine microplastic removal locations for two scenarios: removing the most surface microplastic and reducing the impact on ecosystems, using plankton growth as a proxy. The simulations show that the optimal removal locations are primarily located off the coast of China and in the Indonesian Archipelago for both scenarios. Our estimates show that 31% of the modeled microplastic mass can be removed by 2025 using 29 plastic collectors operating at a 45% capture efficiency from these locations, compared to only 17% when the 29 plastic collectors are moored in the North Pacific garbage patch, between Hawaii and California. The overlap of ocean surface microplastics and phytoplankton growth can be reduced by 46% at our proposed locations, while sinks in the North Pacific can only reduce the overlap by 14%. These results are an indication that oceanic plastic removal might be more effective in removing a greater microplastic mass and in reducing potential harm to marine life when closer to shore than inside the plastic accumulation zones in the centers of the gyres. (letter)

  8. Constraining Agricultural Irrigation Surface Energy Budget Feedbacks in Atmospheric Models

    Science.gov (United States)

    Aufforth, M. E.; Desai, A. R.; Suyker, A.

    2017-12-01

    The expansion and modernization of irrigation increased the relevance of knowing the effects it has on regional weather and climate feedbacks. We conducted a set of observationally-constrained simulations determining the result irrigation exhibits on the surface energy budget, the atmospheric boundary layer, and regional precipitation feedbacks. Eddy covariance flux tower observations were analyzed from two irrigated and one rain-fed corn/soybean rotation sites located near Mead, Nebraska. The evaluated time period covered the summer growing months of June, July, and August (JJA) during the years when corn grew at all three sites. As a product of higher continuous surface moisture availability, the irrigated crops had significantly higher amounts of energy partitioned towards latent heating than the non-irrigated site. The daily average peak of latent heating at the rain-fed site occurred before the irrigated sites and was approximately 45 W/m2 lower. Land surface models were evaluated on their ability to reproduce these effects, including those used in numerical weather prediction and those used in agricultural carbon cycle projection. Model structure, mechanisms, and parameters that best represent irrigation-surface energy impacts will be compared and discussed.

  9. Modeling marine surface microplastic transport to assess optimal removal locations

    Science.gov (United States)

    Sherman, Peter; van Sebille, Erik

    2016-01-01

    Marine plastic pollution is an ever-increasing problem that demands immediate mitigation and reduction plans. Here, a model based on satellite-tracked buoy observations and scaled to a large data set of observations on microplastic from surface trawls was used to simulate the transport of plastics floating on the ocean surface from 2015 to 2025, with the goal to assess the optimal marine microplastic removal locations for two scenarios: removing the most surface microplastic and reducing the impact on ecosystems, using plankton growth as a proxy. The simulations show that the optimal removal locations are primarily located off the coast of China and in the Indonesian Archipelago for both scenarios. Our estimates show that 31% of the modeled microplastic mass can be removed by 2025 using 29 plastic collectors operating at a 45% capture efficiency from these locations, compared to only 17% when the 29 plastic collectors are moored in the North Pacific garbage patch, between Hawaii and California. The overlap of ocean surface microplastics and phytoplankton growth can be reduced by 46% at our proposed locations, while sinks in the North Pacific can only reduce the overlap by 14%. These results are an indication that oceanic plastic removal might be more effective in removing a greater microplastic mass and in reducing potential harm to marine life when closer to shore than inside the plastic accumulation zones in the centers of the gyres.

  10. Interactive system for quick modeling of aircraft surfaces

    Science.gov (United States)

    Mudur, S. P.; Khandekar, Dilip R.

    1990-08-01

    The precise specification of surface geometry of an aircraft is one of the most important and major activities inits design. An initial design, defined by the fundamental requirements, is iteratively analysed and modified till a satisfactory configuration is obtained. Very often in the early stages the need to rapidly make modifications to the geometry for immediate analysis overrides the stringency of smoothness and correctness ofthe surfaces. This paper describes the design of an interactive system which enables the designer to quickly specify the surface geometry and to modify it easily and rapidly. In particular, the software engineering aspects are emphasized. The system uses B-splines for the representation of complex geometry. Surfaces of revolution, required to model certain parts ofthe aircraft, and other simple geometric primitives are also supported. Apart from the usual modeller facilities, features such as camber, twist and form constraints such as tangent or curvature control at a point, etc., are also provided. The system enables easy input and rapid editing of geomeiry through the use of a number of innovative concepts which aim at simplifying and speeding up the man-machine interaction. Multiple window display of entities, augmented by plots of curvature, cross sections etc. provide the visualization tool necessary to assist the designer in decision making.

  11. DIFFERENCES IN THE PROFILES OF DSM-IV AND DSM-5 ALCOHOL USE DISORDERS: IMPLICATIONS FOR CLINICIANS

    Science.gov (United States)

    Dawson, Deborah A.; Goldstein, Risë B.; Grant, Bridget F.

    2013-01-01

    Background Existing information on consequences of the DSM-5 revision for diagnosis of alcohol use disorders (AUD) has gaps, including missing information critical to understanding implications of the revision for clinical practice. Methods Data from Wave 2 of the National Epidemiologic Survey on Alcohol and Related Conditions were used to compare AUD severity, alcohol consumption and treatment, sociodemographic and health characteristics and psychiatric comorbidity among individuals with DSM-IV abuse versus DSM-5 moderate AUD and DSM-IV dependence versus DSM-5 severe AUD. For each pair of disorders, we additionally compared three mutually exclusive groups: individuals positive solely for the DSM-IV disorder, those positive solely for the DSM-5 disorder and those positive for both. Results Whereas 80.5% of individuals positive for DSM-IV dependence were positive for DSM-5 severe AUD, only 58.0% of those positive for abuse were positive for moderate AUD. The profiles of individuals with DSM-IV dependence and DSM-5 severe AUD were almost identical. The only significant (pDSM-5 moderate AUD and DSM-IV abuse differed substantially. The former endorsed more AUD criteria, had higher rates of physiological dependence, were less likely to be White and male, had lower incomes, were less likely to have private and more likely to have public health insurance, and had higher levels of comorbid anxiety disorders than the latter. Conclusions Similarities between the profiles of DSM-IV and DSM-5 AUD far outweigh differences; however, clinicians may face some changes with respect to appropriate screening and referral for cases at the milder end of the AUD severity spectrum, and the mechanisms through which these will be reimbursed may shift slightly from the private to public sector. PMID:22974144

  12. Concordance between DSM-5 and DSM-IV nicotine, alcohol, and cannabis use disorder diagnoses among pediatric patients.

    Science.gov (United States)

    Kelly, Sharon M; Gryczynski, Jan; Mitchell, Shannon Gwin; Kirk, Arethusa; O'Grady, Kevin E; Schwartz, Robert P

    2014-07-01

    The recently published Diagnostic and Statistical Manual of Mental Disorders-5 (DSM-5) includes several major revisions to substance use diagnoses. Studies have evaluated the impact of these changes among adult samples but research with adolescent samples is lacking. 525 adolescents (93% African American) awaiting primary care appointments in Baltimore, Maryland were recruited for a study evaluating a substance use screening instrument. Participants were assessed for DSM-5 nicotine, alcohol, and cannabis use disorder, DSM-IV alcohol and cannabis abuse, and DSM-IV dependence for all three substances during the past year using the modified Composite International Diagnostic Interview-2, Substance Abuse Module. Contingency tables examining DSM-5 vs. DSM-IV joint frequency distributions were examined for each substance. Diagnoses were more prevalent using DSM-5 criteria compared with DSM-IV for nicotine (4.0% vs. 2.7%), alcohol (4.6% vs. 3.8%), and cannabis (10.7% vs. 8.2%). Cohen's κ, Somers' d, and Cramer's V ranged from 0.70 to 0.99 for all three substances. Of the adolescents categorized as "diagnostic orphans" under DSM-IV, 7/16 (43.8%), 9/29 (31.0%), and 13/36 (36.1%) met criteria for DSM-5 disorder for nicotine, alcohol, and cannabis, respectively. Additionally, 5/17 (29.4%) and 1/21 (4.8%) adolescents who met criteria for DSM-IV abuse did not meet criteria for a DSM-5 diagnosis for alcohol and cannabis, respectively. Categorizing adolescents using DSM-5 criteria may result in diagnostic net widening-particularly for cannabis use disorders-by capturing adolescents who were considered diagnostic orphans using DSM-IV criteria. Future research examining the validity of DSM-5 substance use disorders with larger and more diverse adolescent samples is needed. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  13. Can atom-surface potential measurements test atomic structure models?

    Science.gov (United States)

    Lonij, Vincent P A; Klauss, Catherine E; Holmgren, William F; Cronin, Alexander D

    2011-06-30

    van der Waals (vdW) atom-surface potentials can be excellent benchmarks for atomic structure calculations. This is especially true if measurements are made with two different types of atoms interacting with the same surface sample. Here we show theoretically how ratios of vdW potential strengths (e.g., C₃(K)/C₃(Na)) depend sensitively on the properties of each atom, yet these ratios are relatively insensitive to properties of the surface. We discuss how C₃ ratios depend on atomic core electrons by using a two-oscillator model to represent the contribution from atomic valence electrons and core electrons separately. We explain why certain pairs of atoms are preferable to study for future experimental tests of atomic structure calculations. A well chosen pair of atoms (e.g., K and Na) will have a C₃ ratio that is insensitive to the permittivity of the surface, whereas a poorly chosen pair (e.g., K and He) will have a ratio of C₃ values that depends more strongly on the permittivity of the surface.

  14. ADSL Transceivers Applying DSM and Their Nonstationary Noise Robustness

    Directory of Open Access Journals (Sweden)

    Bostoen Tom

    2006-01-01

    Full Text Available Dynamic spectrum management (DSM comprises a new set of techniques for multiuser power allocation and/or detection in digital subscriber line (DSL networks. At the Alcatel Research and Innovation Labs, we have recently developed a DSM test bed, which allows the performance of DSM algorithms to be evaluated in practice. With this test bed, we have evaluated the performance of a DSM level-1 algorithm known as iterative water-filling in an ADSL scenario. This paper describes the results of, on the one hand, the performance gains achieved with iterative water-filling, and, on the other hand, the nonstationary noise robustness of DSM-enabled ADSL modems. It will be shown that DSM trades off nonstationary noise robustness for performance improvements. A new bit swap procedure is then introduced to increase the noise robustness when applying DSM.

  15. The DSM and Professional Practice: Research, Clinical, and Institutional Perspectives.

    Science.gov (United States)

    Halpin, Michael

    2016-06-01

    How mental illnesses are defined has significant ramifications, given the substantial social and individual repercussions of these conditions. Using actor-network theory, I analyze how mental health professionals use the Diagnostic and Statistical Manual of Mental Disorders (DSM) in their work. Drawing on observations of a neuropsychological laboratory and interviews with 27 professionals (i.e., psychiatrists, psychologists), I investigate how the DSM is used in research, clinical, and institutional work. In research, the DSM influences study design and exclusion/inclusion criteria. In the clinic, the DSM influences how disorders are conceptualized and diagnosed. Institutionally, the DSM aligns the patient-professional encounter to insurance and pharmaceutical interests. I conclude that the DSM operates as multiple, context-specific taxonomies that pervasively influence professional practices, such that all possible actions must orient to DSM criteria, with professionals both a source and an object of institutionalized gaze. © American Sociological Association 2016.

  16. Commentary: Problems with the sexual disorders sections of DSM-5.

    Science.gov (United States)

    Ross, Colin A

    2015-01-01

    There are a number of problems with the sexual disorders sections of the Diagnostic and Statistical Manual of Mental Disorders, fifth edition. These problems must be understood in a historical context, namely the evolution of criteria for psychosexual disorders from DSM-II (1968) to DSM-5 (2013). There are many inconsistencies in the DSM-5 criteria for different sexual disorders. Given these inconsistencies--and the history of diagnostic criteria for homosexuality and gender identity disorder from DSM-II to DSM-5--it is possible that, like homosexuality, DSM-5 gender dysphoria could disappear from future editions of the manual. Even if that does not happen, there are numerous problems with the DSM-5 sexual disorders that require attention.

  17. ADSL Transceivers Applying DSM and Their Nonstationary Noise Robustness

    Science.gov (United States)

    den Bogaert, Etienne Van; Bostoen, Tom; Verlinden, Jan; Cendrillon, Raphael; Moonen, Marc

    2006-12-01

    Dynamic spectrum management (DSM) comprises a new set of techniques for multiuser power allocation and/or detection in digital subscriber line (DSL) networks. At the Alcatel Research and Innovation Labs, we have recently developed a DSM test bed, which allows the performance of DSM algorithms to be evaluated in practice. With this test bed, we have evaluated the performance of a DSM level-1 algorithm known as iterative water-filling in an ADSL scenario. This paper describes the results of, on the one hand, the performance gains achieved with iterative water-filling, and, on the other hand, the nonstationary noise robustness of DSM-enabled ADSL modems. It will be shown that DSM trades off nonstationary noise robustness for performance improvements. A new bit swap procedure is then introduced to increase the noise robustness when applying DSM.

  18. sA Comparison of DSM-IV-TR and DSM-5 Diagnostic Classifications in the Clinical Diagnosis of Autistic Spectrum Disorder

    Science.gov (United States)

    Yaylaci, Ferhat; Miral, Suha

    2017-01-01

    Aim of this study was to compare children diagnosed with Pervasive Developmental Disorder (PDD) according to DSM-IV-TR and DSM-5 diagnostic systems. One hundred fifty children aged between 3 and 15 years diagnosed with PDD by DSM-IV-TR were included. PDD symptoms were reviewed through psychiatric assessment based on DSM-IV-TR and DSM-5 criteria.…

  19. Nanoimprint Lithography on curved surfaces prepared by fused deposition modelling

    International Nuclear Information System (INIS)

    Köpplmayr, Thomas; Häusler, Lukas; Bergmair, Iris; Mühlberger, Michael

    2015-01-01

    Fused deposition modelling (FDM) is an additive manufacturing technology commonly used for modelling, prototyping and production applications. The achievable surface roughness is one of its most limiting aspects. It is however of great interest to create well-defined (nanosized) patterns on the surface for functional applications such as optical effects, electronics or bio-medical devices. We used UV-curable polymers of different viscosities and flexible stamps made of poly(dimethylsiloxane) (PDMS) to perform Nanoimprint Lithography (NIL) on FDM-printed curved parts. Substrates with different roughness and curvature were prepared using a commercially available 3D printer. The nanoimprint results were characterized by optical light microscopy, profilometry and atomic force microscopy (AFM). Our experiments show promising results in creating well-defined microstructures on the 3D-printed parts. (paper)

  20. Comparison of DSM-IV and DSM-5 criteria for alcohol use disorders in VA primary care patients with frequent heavy drinking enrolled in a trial.

    Science.gov (United States)

    Takahashi, Traci; Lapham, Gwen; Chavez, Laura J; Lee, Amy K; Williams, Emily C; Richards, Julie E; Greenberg, Diane; Rubinsky, Anna; Berger, Douglas; Hawkins, Eric J; Merrill, Joseph O; Bradley, Katharine A

    2017-07-18

    Criteria for alcohol use disorders (AUD) in the Diagnostic and Statistical Manual of Mental Disorders, 5th edition (DSM-5) were intended to result in a similar prevalence of AUD as DSM-IV. We evaluated the prevalence of AUD using DSM-5 and DSM-IV criteria, and compared characteristics of patients who met criteria for: neither DSM-5 nor DSM-IV AUD, DSM-5 alone, DSM-IV alone, or both, among Veterans Administration (VA) outpatients in the Considering Healthier drinking Options In primary CarE (CHOICE) trial. VA primary care patients who reported frequent heavy drinking and enrolled in the CHOICE trial were interviewed at baseline using the DSM-IV Mini International Neuropsychiatric Interview for AUD, as well as questions about socio-demographics, mental health, alcohol craving, and substance use. We compared characteristics across 4 mutually exclusive groups based on DSM-5 and DSM-IV criteria. Of 304 participants, 13.8% met criteria for neither DSM-5 nor DSM-IV AUD; 12.8% met criteria for DSM-5 alone, and 73.0% met criteria for both DSM-IV and DSM-5. Only 1 patient (0.3%) met criteria for DSM-IV AUD alone. Patients meeting both DSM-5 and DSM-IV criteria had more negative drinking consequences, mental health symptoms and self-reported readiness to change compared with those meeting DSM-5 criteria alone or neither DSM-5 nor DSM-IV criteria. In this sample of primary care patients with frequent heavy drinking, DSM-5 identified 13% more patients with AUD than DSM-IV. This group had a lower mental health symptom burden and less self-reported readiness to change compared to those meeting criteria for both DSM-IV and DSM-5 AUD. Trial Registration ClinicalTrials.gov NCT01400581. 2011 February 17.

  1. DSM disorders and their criteria: how should they inter-relate?

    Science.gov (United States)

    Kendler, K S

    2017-09-01

    While the changes in psychiatric diagnosis introduced by Diagnostic and Statistical Manual third edition (DSM-III) have had major benefits to the field of psychiatry, the reification of its diagnostic criteria and the widespread adoption of diagnostic literalism have been problematic. I argue that, at root, these developments can be best understood by contrasting two approaches to the relationship between DSM disorders and their criteria. In a constitutive relationship, criteria definitively define the disorder. Having a disorder is nothing more than meeting the criteria. In an indexical relationship, the criteria are fallible indices of a disorder understood as a hypothetical, tentative diagnostic construct. I trace the origins of the constitutive model to the philosophical theory of operationalism. I then examine a range of historical and empirical results that favor the indexical over the constitutive position including (i) evidence that individual criteria for DSM-III were selected from a broader pool of possible symptoms/signs, (ii) revisions of DSM have implicitly assumed an indexical criteria-disorder relationship, (iii) the indexical position allows DSM criteria to be wrong and misdiagnose patients while such a result is incoherent for a constitutive model, an implausible position, (iv) we assume an indexical criteria-scale relationships for many personality and symptom measures commonly used in psychiatric practice and research, and (v) empirical studies suggesting similar performance for DSM and non-DSM symptoms for major depression. I then review four reasons for the rise of the constitutive position: (i) the 'official' nature of the DSM criteria, (ii) the strong investment psychiatry has had in the DSM manual and its widespread use and success, iii) lack of a clear pathophysiology for our disorders, and (iv) the absence of informative diagnostic signs of minimal clinical importance. I conclude that the constitutive position is premature and reflects a

  2. Modeling Turbulence Generation in the Atmospheric Surface and Boundary Layers

    Science.gov (United States)

    2015-10-01

    ZT ). The initial acceleration of the rising buoyant air will be a = g∆T/TA. This is simply Archimedes ’ principle applied to the buoyant air. The... applications . 1 Various rules are employed to model C2n in the surface layer, but a key question is how to extend this estimation technique into the lower...in terms of wind turbulence the structure of the fluctuations produces a Reynolds stress tensor whose principle axes are not equal, meaning that at the

  3. The DSM-5: Hyperbole, Hope or Hypothesis?

    Science.gov (United States)

    Berk, Michael

    2013-05-14

    The furore preceding the release of the new edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM-5) is in contrast to the incremental changes to several diagnostic categories, which are derived from new research since its predecessor's birth in 1990. While many of these changes are indeed controversial, they do reflect the intrinsic ambiguity of the extant literature. Additionally, this may be a mirror of the frustration of the field's limited progress, especially given the false hopes at the dawn of the "decade of the brain". In the absence of a coherent pathophysiology, the DSM remains no more than a set of consensus based operationalized adjectives, albeit with some degree of reliability. It does not cleave nature at its joints, nor does it aim to, but neither does alternate systems. The largest problem with the DSM system is how it's used; sometimes too loosely by clinicians, and too rigidly by regulators, insurers, lawyers and at times researchers, who afford it reference and deference disproportionate to its overt acknowledged limitations.

  4. Addiction and dependence in DSM-V.

    Science.gov (United States)

    O'Brien, Charles

    2011-05-01

    As preparations for the fifth revision of the Diagnostic and Statistical Manual of Mental Disorders (DSM) are under way, this paper focuses upon changes proposed for the substance use disorders section. It briefly outlines the history behind the current nomenclature, and the selection of the term 'dependence' over 'addiction' in earlier versions of the DSM. The term 'dependence', while used in past decades to refer to uncontrolled drug-seeking behavior, has an alternative meaning--the physiological adaptation that occurs when medications acting on the central nervous system are ingested with rebound when the medication is abruptly discontinued. These dual meanings have led to confusion and may have propagated current clinical practices related to under-treatment of pain, as physicians fear creating an 'addiction' by prescribing opioids. In part to address this problem, a change proposed for DSM-V is to alter the chapter name to 'Addiction and Related Disorders', which will include disordered gambling. The specific substance use disorders may be referred to as 'alcohol use' or 'opioid use' disorders. The criteria for the disorders are likely to remain similar, with the exception of removal of the 'committing illegal acts' criterion and addition of a 'craving' criterion. The other major change relates to the elimination of the abuse/dependence dichotomy, given the lack of data supporting an intermediate stage. These changes are anticipated to improve clarification and diagnosis and treatment of substance use and related disorders. © 2010 The Author, Addiction © 2010 Society for the Study of Addiction.

  5. Using advanced surface complexation models for modelling soil chemistry under forests: Solling forest, Germany

    International Nuclear Information System (INIS)

    Bonten, Luc T.C.; Groenenberg, Jan E.; Meesenburg, Henning; Vries, Wim de

    2011-01-01

    Various dynamic soil chemistry models have been developed to gain insight into impacts of atmospheric deposition of sulphur, nitrogen and other elements on soil and soil solution chemistry. Sorption parameters for anions and cations are generally calibrated for each site, which hampers extrapolation in space and time. On the other hand, recently developed surface complexation models (SCMs) have been successful in predicting ion sorption for static systems using generic parameter sets. This study reports the inclusion of an assemblage of these SCMs in the dynamic soil chemistry model SMARTml and applies this model to a spruce forest site in Solling Germany. Parameters for SCMs were taken from generic datasets and not calibrated. Nevertheless, modelling results for major elements matched observations well. Further, trace metals were included in the model, also using the existing framework of SCMs. The model predicted sorption for most trace elements well. - Highlights: → Surface complexation models can be well applied in field studies. → Soil chemistry under a forest site is adequately modelled using generic parameters. → The model is easily extended with extra elements within the existing framework. → Surface complexation models can show the linkages between major soil chemistry and trace element behaviour. - Surface complexation models with generic parameters make calibration of sorption superfluous in dynamic modelling of deposition impacts on soil chemistry under nature areas.

  6. DSM-IV und DSM-5: Was hat sich tatsächlich verändert?

    OpenAIRE

    Ehret, Anna M.; Berking, Matthias

    2013-01-01

    Im Mai 2013 ist die fünfte Auflage des Diagnostischen und Statistischen Manuals Psychischer Störungen (DSM-5) der American Psychiatric Association erschienen. Um die Vor- und Nachteile des DSM-5 beurteilen und gegebenenfalls in Forschung und Praxis angemessen berücksichtigen zu können, sollten Wissenschaftler und Praktiker gleichermaßen über die Änderungen gegenüber dem DSM-IV informiert sein. In diesem Beitrag werden die wesentlichen Unterschiede zwischen dem DSM-IV und DSM-5 beschrieben. Ze...

  7. Corrected electrostatic model for dipoles adsorbed on a metal surface

    Energy Technology Data Exchange (ETDEWEB)

    Maschhoff, B.L.; Cowin, J.P. (Enviornmental and Molecular Science Laboratory, Pacific Northwest Laboratories Box 999 MS K2-14, Richland, Washington 99352 (United States))

    1994-11-01

    We present a dipole--dipole interaction model for polar molecules vertically adsorbed on a idealized metal surface in an approximate analytic form suitable for estimating the coverage dependence of the work function, binding energies, and thermal desorption activation energies. In contrast to previous treatments, we have included all contributions to the interaction energy within the dipole model, such as the internal polarization energy and the coverage dependence of the self-image interaction with the metal. We show that these can contribute significantly to the total interaction energy. We present formulae for both point and extended dipole cases.

  8. Kinetic computer modeling of microwave surface-wave plasma production

    International Nuclear Information System (INIS)

    Ganachev, Ivan P.

    2004-01-01

    Kinetic computer plasma modeling occupies an intermediate position between the time consuming rigorous particle dynamic simulation and the fast but rather rough cold- or warm-plasma fluid models. The present paper reviews the kinetic modeling of microwave surface-wave discharges with accent on recent kinetic self-consistent models, where the external input parameters are reduced to the necessary minimum (frequency and intensity of the applied microwave field and pressure and geometry of the discharge vessel). The presentation is limited to low pressures, so that Boltzmann equation is solved in non-local approximation and collisional electron heating is neglected. The numerical results reproduce correctly the bi-Maxwellian electron energy distribution functions observed experimentally. (author)

  9. Comparing the dimensional structure and diagnostic algorithms between DSM-5 and ICD-11 PTSD in children and adolescents.

    Science.gov (United States)

    Sachser, Cedric; Berliner, Lucy; Holt, Tonje; Jensen, Tine; Jungbluth, Nathaniel; Risch, Elizabeth; Rosner, Rita; Goldbeck, Lutz

    2018-02-01

    In contrast to the DSM-5, which expanded the posttraumatic stress disorder (PTSD) symptom profile to 20 symptoms, a workgroup of the upcoming ICD-11 suggested a reduced symptom profile with six symptoms for PTSD. Therefore, the objective of the study was to investigate the dimensional structure of DSM-5 and ICD-11 PTSD in a clinical sample of trauma-exposed children and adolescents and to compare the diagnostic rates of PTSD between diagnostic systems. The study sample consisted of 475 self-reports and 424 caregiver-reports on the child and adolescent trauma screen (CATS), which were collected at pediatric mental health clinics in the US, Norway and Germany. The factor structure of the PTSD construct as defined in the DSM-5 and in alternative models of both DSM-5 and ICD-11 was investigated using confirmatory factor analyses (CFA). To evaluate differences in PTSD prevalence, McNemar's tests for correlated proportions were used. CFA results demonstrated excellent model fit for the proposed ICD-11 model of PTSD. For the DSM-5 models we found the best fit for the hybrid model. Diagnostic rates were significantly lower according to ICD-11 (self-report: 23.4%; caregiver-report: 16.5%) compared with the DSM-5 (self-report: 37.8%; caregiver-report: 31.8%). Agreement was low between diagnostic systems. Study findings provide support for an alternative latent dimensionality of DSM-5 PTSD in children and adolescents. The conceptualization of ICD-11 PTSD shows an excellent fit. Inconsistent PTSD constructs and significantly diverging diagnostic rates between DSM-5 and the ICD-11 will result in major challenges for researchers and clinicians in the field of psychotraumatology.

  10. A framework for modeling connections between hydraulics, water surface roughness, and surface reflectance in open channel flows

    Science.gov (United States)

    Legleiter, Carl; Mobley, Curtis D.; Overstreet, Brandon

    2017-01-01

    This paper introduces a framework for examining connections between the flow field, the texture of the air-water interface, and the reflectance of the water surface and thus evaluating the potential to infer hydraulic information from remotely sensed observations of surface reflectance. We used a spatial correlation model describing water surface topography to illustrate the application of our framework. Nondimensional relations between model parameters and flow intensity were established based on a prior flume study. Expressing the model in the spatial frequency domain allowed us to use an efficient Fourier transform-based algorithm for simulating water surfaces. Realizations for both flume and field settings had water surface slope distributions positively correlated with velocity and water surface roughness. However, most surface facets were gently sloped and thus unlikely to yield strong specular reflections; the model exaggerated the extent of water surface features, leading to underestimation of facet slopes. A ray tracing algorithm indicated that reflectance was greatest when solar and view zenith angles were equal and the sensor scanned toward the Sun to capture specular reflections of the solar beam. Reflected energy was concentrated in a small portion of the sky, but rougher water surfaces reflected rays into a broader range of directions. Our framework facilitates flight planning to avoid surface-reflected radiance while mapping other river attributes, or to maximize this component to exploit relationships between hydraulics and surface reflectance. This initial analysis also highlighted the need for improved models of water surface topography in natural rivers.

  11. A framework for modeling connections between hydraulics, water surface roughness, and surface reflectance in open channel flows

    Science.gov (United States)

    Legleiter, Carl J.; Mobley, Curtis D.; Overstreet, Brandon T.

    2017-09-01

    This paper introduces a framework for examining connections between the flow field, the texture of the air-water interface, and the reflectance of the water surface and thus evaluating the potential to infer hydraulic information from remotely sensed observations of surface reflectance. We used a spatial correlation model describing water surface topography to illustrate the application of our framework. Nondimensional relations between model parameters and flow intensity were established based on a prior flume study. Expressing the model in the spatial frequency domain allowed us to use an efficient Fourier transform-based algorithm for simulating water surfaces. Realizations for both flume and field settings had water surface slope distributions positively correlated with velocity and water surface roughness. However, most surface facets were gently sloped and thus unlikely to yield strong specular reflections; the model exaggerated the extent of water surface features, leading to underestimation of facet slopes. A ray tracing algorithm indicated that reflectance was greatest when solar and view zenith angles were equal and the sensor scanned toward the Sun to capture specular reflections of the solar beam. Reflected energy was concentrated in a small portion of the sky, but rougher water surfaces reflected rays into a broader range of directions. Our framework facilitates flight planning to avoid surface-reflected radiance while mapping other river attributes, or to maximize this component to exploit relationships between hydraulics and surface reflectance. This initial analysis also highlighted the need for improved models of water surface topography in natural rivers.

  12. Efficacy of Lactobacillus reuteri DSM 17938 for infantile colic: Systematic review with network meta-analysis.

    Science.gov (United States)

    Gutiérrez-Castrellón, Pedro; Indrio, Flavia; Bolio-Galvis, Alexis; Jiménez-Gutiérrez, Carlos; Jimenez-Escobar, Irma; López-Velázquez, Gabriel

    2017-12-01

    5% to 40% of infants cry excessively, usually accompanied by fussiness and excessive of gas. There are no uniform criteria for treatment of infantile colic. Lactobacillus reuteri DSM 17938 has been used with promising results. The objective of this network-meta-analysis (NMA) is to compare the efficacy of L reuteri DSM 17938 with other interventions for infantile colic. RCTs, published between 1960 and 2015 for the treatment of infantile colic were included. Primary outcome was duration of crying after 21 to 28 days of treatment. Different databases were searched. Information was analyzed using control group as central axis. A random effect model was used. Hedges standard mean difference (SMD) and odds ratio (OR) were calculated. A SUCRA analysis was performed to evaluate superiority for each intervention. 32 RCTs were analyzed, including 2242 patients. Studies with L reuteri DSM 17938 versus Ctrl., Diet versus Ctrl. and Acupuncture versus Ctrl. were the most influential studies in the NMA. L reuteri DSM 17938 [WMD -51.3 h (CI95% -72.2 to -30.5 h), P .0001] and dietetic approaches [WMD -37.4 h (CI95% -56.1 to -18.7 h), P .0001] were superior compared to the other treatments. L reuteri DSM 17938 and some dietetic approaches are better to other interventions for treatment of infantile colic. Copyright © 2017 The Authors. Published by Wolters Kluwer Health, Inc. All rights reserved.

  13. Heterogeneous nucleation of ice on model carbon surfaces

    Science.gov (United States)

    Molinero, V.; Lupi, L.; Hudait, A.

    2014-12-01

    Carbonaceous particles account for 10% of the particulate matter in the atmosphere. The experimental investigation of heterogeneous freezing of water droplets by carbonaceous particles reveals widespread ice freezing temperatures. The origin of the soot and its oxidation and aging modulate its ice nucleation ability, however, it is not known which structural and chemical characteristics of soot account for the variability in ice nucleation efficiency. We find that atomically flat carbon surfaces promote heterogeneous nucleation of ice, while molecularly rough surfaces with the same hydrophobicity do not. We investigate a large set of graphitic surfaces of various dimensions and radii of curvature consistent with those of soot in experiments, and find that variations in nanostructures alone could account for the spread in the freezing temperatures of ice on soot in experiments. A characterization of the nanostructure of soot is needed to predict its ice nucleation efficiency. Atmospheric oxidation and aging of soot modulates its ice nucleation ability. It has been suggested that an increase in the ice nucleation ability of aged soot results from an increase in the hydrophilicity of the surfaces upon oxidation. Oxidation, however, also impacts the nanostructure of soot, making it difficult to assess the separate effects of soot nanostructure and hydrophilicity in experiments. We investigate the effect of changes in hydrophilicity of model graphitic surfaces on the freezing temperature of ice. Our results indicate that the hydrophilicity of the surface is not in general a good predictor of ice nucleation ability. We find a correlation between the ability of a surface to promote nucleation of ice and the layering of liquid water at the surface. The results of this work suggest that ordering of liquid water in contact with the surface plays an important role in the heterogeneous ice nucleation mechanism. References: L. Lupi, A. Hudait and V. Molinero, J. Am. Chem. Soc

  14. [Forensic assessment of DSM-5 posttraumatic stress disorder: a commentary on the transition from DSM-IV-TR (I)].

    Science.gov (United States)

    Stevens, A; Fabra, M

    2013-12-01

    In May 2013 the American Psychiatric Association (APA) has released the latest and fifth edition of the diagnostic and statistical manual of mental disorders (DSM-5). Like its predecessor, the DSM-IV-TR, it will have considerable impact on the science of Psychiatry. The DSM-5 describes - actually available in English - the present medical knowledge about mental disorders. In the short run, German medical science and scientific medicolegal expertises will continue to rely on the German version of the DSM-IV-TR, however, they will be difficult to defend without bearing in mind the changes that DSM-5 brings about. This report discusses the transition from DSM-IV-TR to DSM-5 with regard to posttraumatic stress disorder (PTSD) and provides suggestions, how the criteria might be evaluated.

  15. Coupled Surface and Groundwater Hydrological Modeling in a Changing Climate.

    Science.gov (United States)

    Sridhar, Venkataramana; Billah, Mirza M; Hildreth, John W

    2017-11-09

    Many current watershed modeling efforts now incorporate surface water and groundwater for managing water resources since the exchanges between groundwater and surface water need a special focus considering the changing climate. The influence of groundwater dynamics on water and energy balance components is investigated in the Snake River Basin (SRB) by coupling the Variable Infiltration Capacity (VIC) and MODFLOW models (VIC-MF) for the period of 1986 through 2042. A 4.4% increase in base flows and a 10.3% decrease in peak flows are estimated by VIC-MF compared to the VIC model in SRB. The VIC-MF model shows significant improvement in the streamflow simulation (Nash-Sutcliffe efficiency [NSE] of 0.84) at King Hill, where the VIC model could not capture the effect of spring discharge in the streamflow simulation (NSE of -0.30); however, the streamflow estimates show an overall decreasing trend. Two climate scenarios representing median and high radiative-forcings such as representative concentration pathways 4.5 and 8.5 show an average increase in the water table elevations between 2.1 and 2.6 m (6.9 and 8.5 feet) through the year 2042. The spatial patterns of these exchanges show a higher groundwater elevation of 15 m (50 feet) in the downstream area and a lower elevation of up to 3 m (10 feet) in the upstream area. Broadly, this study supports results of previous work demonstrating that integrated assessment of groundwater-surface water enables stakeholders to balance pumping, recharge and base flow needs and to manage the watersheds that are subjected to human pressures more sustainably. © 2017, National Ground Water Association.

  16. Reliable low precision simulations in land surface models

    Science.gov (United States)

    Dawson, Andrew; Düben, Peter D.; MacLeod, David A.; Palmer, Tim N.

    2017-12-01

    Weather and climate models must continue to increase in both resolution and complexity in order that forecasts become more accurate and reliable. Moving to lower numerical precision may be an essential tool for coping with the demand for ever increasing model complexity in addition to increasing computing resources. However, there have been some concerns in the weather and climate modelling community over the suitability of lower precision for climate models, particularly for representing processes that change very slowly over long time-scales. These processes are difficult to represent using low precision due to time increments being systematically rounded to zero. Idealised simulations are used to demonstrate that a model of deep soil heat diffusion that fails when run in single precision can be modified to work correctly using low precision, by splitting up the model into a small higher precision part and a low precision part. This strategy retains the computational benefits of reduced precision whilst preserving accuracy. This same technique is also applied to a full complexity land surface model, resulting in rounding errors that are significantly smaller than initial condition and parameter uncertainties. Although lower precision will present some problems for the weather and climate modelling community, many of the problems can likely be overcome using a straightforward and physically motivated application of reduced precision.

  17. Water on hydrophobic surfaces: Mechanistic modeling of hydrophobic interaction chromatography.

    Science.gov (United States)

    Wang, Gang; Hahn, Tobias; Hubbuch, Jürgen

    2016-09-23

    Mechanistic models are successfully used for protein purification process development as shown for ion-exchange column chromatography (IEX). Modeling and simulation of hydrophobic interaction chromatography (HIC) in the column mode has been seldom reported. As a combination of these two techniques is often encountered in biopharmaceutical purification steps, accurate modeling of protein adsorption in HIC is a core issue for applying holistic model-based process development, especially in the light of the Quality by Design (QbD) approach. In this work, a new mechanistic isotherm model for HIC is derived by consideration of an equilibrium between well-ordered water molecules and bulk-like ordered water molecules on the hydrophobic surfaces of protein and ligand. The model's capability of describing column chromatography experiments is demonstrated with glucose oxidase, bovine serum albumin (BSA), and lysozyme on Capto™ Phenyl (high sub) as model system. After model calibration from chromatograms of bind-and-elute experiments, results were validated with batch isotherms and prediction of further gradient elution chromatograms. Copyright © 2016 Elsevier B.V. All rights reserved.

  18. Validity of DSM-IV attention–deficit/hyperactivity disorder symptom dimensions and subtypes

    Science.gov (United States)

    Willcutt, Erik G.; Nigg, Joel T.; Pennington, Bruce F.; Solanto, Mary V.; Rohde, Luis A.; Tannock, Rosemary; Loo, Sandra K.; Carlson, Caryn L.; McBurnett, Keith; Lahey, Benjamin B.

    2013-01-01

    DSM-IV criteria for ADHD specify two dimensions of inattention and hyperactivity-impulsivity symptoms that are used to define three nominal subtypes: predominantly hyperactive-impulsive type (ADHD-H), predominantly inattentive type (ADHD-I), and combined type (ADHD-C). To aid decision-making for DSM-5 and other future diagnostic systems, a comprehensive literature review and meta-analysis of 546 studies was completed to evaluate the validity of the DSM-IV model of ADHD. Results indicated that DSM-IV criteria identify individuals with significant and persistent impairment in social, academic, occupational, and adaptive functioning when intelligence, demographic factors, and concurrent psychopathology are controlled. Available data overwhelmingly support the concurrent, predictive, and discriminant validity of the distinction between inattention and hyperactivity-impulsivity symptoms, and indicate that nearly all differences among the nominal subtypes are consistent with the relative levels of inattention and hyperactivity-impulsivity symptoms that define the subtypes. In contrast, the validity of the DSM-IV subtype model is compromised by weak evidence for the validity of ADHD-H after first grade, minimal support for the distinction between ADHD-I and ADHD-C in studies of etiological influences, academic and cognitive functioning, and treatment response, and the marked longitudinal instability of all three subtypes. Overall, it is concluded that the DSM-IV ADHD subtypes provide a convenient clinical shorthand to describe the functional and behavioral correlates of current levels of inattention and hyperactivity-impulsivity symptoms, but do not identify discrete subgroups with sufficient long-term stability to justify the classification of distinct forms of the disorder. Empirical support is stronger for an alternative model that would replace the subtypes with dimensional modifiers that reflect the number of inattention and hyperactivity-impulsivity symptoms at the

  19. Dimensionality and stages of severity of DSM-5 criteria in an international sample of alcohol-consuming individuals.

    Science.gov (United States)

    Preuss, U W; Watzke, S; Wurst, F M

    2014-11-01

    The DSM-5 alcohol use disorder (AUD) criteria proposal contains 11 criteria that include most of the DSM-IV abuse and dependence criteria plus craving. The aims of the current study in a large and international alcohol-consuming sample were to confirm the dimensionality of the DSM-5 AUD criteria and to differentiate grades of severity of DSM-5 AUD in subjects who pass the proposed DSM-5 diagnostic threshold of two criteria. We used the World Health Organization (WHO)/International Society on Biomedical Research on Alcoholism (ISBRA) Study on State and Trait Markers of Alcohol Use and Dependence dataset. Subjects included in the analyses were aged ≥ 18 years and were recruited in five countries: Australia, Brazil, Canada, Finland and Japan. Assessment of AUD and additional characteristics was conducted using an adapted version of the Alcohol Use Disorder and Associated Disabilities Interview Schedule (AUDADIS). Dimensionality of the DSM-5 criteria was evaluated using factor analysis and item response theory (IRT) models. The IRT results led to the classification of AUD patients into three severity groups. External validators were used to differentiate statistically across subgroups. A total of 1424 currently drinking individuals were included in the analyses. Factor and IRT analyses confirmed the dimensional structure of DSM-5 AUD criteria. More than 99% of the subjects could be allocated to one of the suggested severity subgroups. The magnitude of the external validators differed significantly across the severity groups. The results confirm the dimensional structure of the proposed DSM-5 AUD criteria. The suggested stages of severity (mild, moderate and severe) may be useful to clinicians by grouping individuals not only in the mild but also in the moderate to severe spectrum of DSM-5 AUD.

  20. Bone density, body composition, and psychopathology of anorexia nervosa spectrum disorders in DSM-IV vs DSM-5.

    Science.gov (United States)

    Schorr, Melanie; Thomas, Jennifer J; Eddy, Kamryn T; Dichtel, Laura E; Lawson, Elizabeth A; Meenaghan, Erinne; Lederfine Paskal, Margaret; Fazeli, Pouneh K; Faje, Alexander T; Misra, Madhusmita; Klibanski, Anne; Miller, Karen K

    2017-04-01

    DSM-5 revised the diagnostic criteria for anorexia nervosa (AN) by eliminating the amenorrhea requirement, liberalizing weight and psychological criteria, and adding the formal diagnosis of "atypical AN" for individuals with AN psychological symptoms without low weight. We sought to determine whether bone density (BMD) is impaired in women diagnosed with AN using the new, more liberal, DSM-5 criteria. Cross-sectional study of 168 women, 18 - 45y: (1) AN by DSM-IV (DSM-IV AN) (n = 37), (2) AN by DSM-5 but not DSM-IV criteria (DSM-5 AN) (n = 33), (3) atypical AN (ATYPICAL AN) (n = 77), (4) healthy comparison group (HC) (n = 21). Measurements included dual energy X-ray absorptiometry, Eating Disorder Examination-Questionnaire, Eating Disorder Inventory-2, Hamilton Depression and Anxiety Rating Scales. BMD Z-score DSM-IV, 82% of DSM-5, and 69% of ATYPICAL. Mean Z-scores were comparably low in DSM-IV and DSM-5, intermediate in ATYPICAL, and highest in HC. Lack of prior low weight or amenorrhea was, but history of overweight/obesity was not, protective against bone loss. Mean lean mass and percent fat mass were significantly lower in all AN groups than HC. DSM-IV, DSM-5, and ATYPICAL had comparable psychopathology. Despite liberalizing diagnostic criteria, many women diagnosed with AN and atypical AN using DSM-5 criteria have low BMD. Presence or history of low weight and/or amenorrhea remain important indications for DXA. Loss of lean mass, in addition to fat mass, is present in all AN groups, and may contribute to low BMD. The deleterious effect of eating disorders on BMD extends beyond those with current low weight and amenorrhea. © 2016 Wiley Periodicals, Inc.(Int J Eat Disord 2017; 50:343-351). © 2016 Wiley Periodicals, Inc.

  1. Panic disorder: a review of DSM-IV panic disorder and proposals for DSM-V.

    Science.gov (United States)

    Craske, Michelle G; Kircanski, Katharina; Epstein, Alyssa; Wittchen, Hans-Ulrich; Pine, Danny S; Lewis-Fernández, Roberto; Hinton, Devon

    2010-02-01

    This review covers the literature since the publication of DSM-IV on the diagnostic criteria for panic attacks (PAs) and panic disorder (PD). Specific recommendations are made based on the evidence available. In particular, slight changes are proposed for the wording of the diagnostic criteria for PAs to ease the differentiation between panic and surrounding anxiety; simplification and clarification of the operationalization of types of PAs (expected vs. unexpected) is proposed; and consideration is given to the value of PAs as a specifier for all DSM diagnoses and to the cultural validity of certain symptom profiles. In addition, slight changes are proposed for the wording of the diagnostic criteria to increase clarity and parsimony of the criteria. Finally, based on the available evidence, no changes are proposed with regard to the developmental expression of PAs or PD. This review presents a number of options and preliminary recommendations to be considered for DSM-V.

  2. Modelling and simulation of surface morphology driven by ion bombardment

    Energy Technology Data Exchange (ETDEWEB)

    Yewande, E.O.

    2006-05-02

    Non-equilibrium surfaces, at nanometer length scales, externally driven via bombardment with energetic particles are known to exhibit well ordered patterns with a variety of applications in nano-technology. These patterns emerge at time scales on the order of minutes. Continuum theory has been quite successful in giving a general picture of the processes that interplay to give the observed patterns, as well as how such competition might determine the properties of the nanostructures. However, continuum theoretical descriptions are ideal only in the asymptotic limit. The only other theoretical alternative, which happens to be more suitable for the characteristic length-and time-scales of pattern formation, is Monte Carlo simulation. In this thesis, surface morphology is studied using discrete solid-on-solid Monte Carlo models of sputtering and surface diffusion. The simulations are performed in the context of the continuum theories and experiments. In agreement with the experiments, the ripples coarsen with time and the ripple velocity exhibits a power-law behaviour with the ripple wavelength, in addition, the exponent was found to depend on the simulation temperature, which suggests future experimental studies of flux dependence. Moreover, a detailed exploration of possible topographies, for different sputtering conditions, corresponding to different materials, was performed. And different surface topographies e.g. holes, ripples, and dots, were found at oblique incidence, without sample rotation. With sample rotation no new topography was found, its only role being to destroy any inherent anisotropy in the system. (orig.)

  3. Modelling and simulation of surface morphology driven by ion bombardment

    International Nuclear Information System (INIS)

    Yewande, E.O.

    2006-01-01

    Non-equilibrium surfaces, at nanometer length scales, externally driven via bombardment with energetic particles are known to exhibit well ordered patterns with a variety of applications in nano-technology. These patterns emerge at time scales on the order of minutes. Continuum theory has been quite successful in giving a general picture of the processes that interplay to give the observed patterns, as well as how such competition might determine the properties of the nanostructures. However, continuum theoretical descriptions are ideal only in the asymptotic limit. The only other theoretical alternative, which happens to be more suitable for the characteristic length-and time-scales of pattern formation, is Monte Carlo simulation. In this thesis, surface morphology is studied using discrete solid-on-solid Monte Carlo models of sputtering and surface diffusion. The simulations are performed in the context of the continuum theories and experiments. In agreement with the experiments, the ripples coarsen with time and the ripple velocity exhibits a power-law behaviour with the ripple wavelength, in addition, the exponent was found to depend on the simulation temperature, which suggests future experimental studies of flux dependence. Moreover, a detailed exploration of possible topographies, for different sputtering conditions, corresponding to different materials, was performed. And different surface topographies e.g. holes, ripples, and dots, were found at oblique incidence, without sample rotation. With sample rotation no new topography was found, its only role being to destroy any inherent anisotropy in the system. (orig.)

  4. Slag transport models for vertical and horizontal surfaces. [SLGTR code

    Energy Technology Data Exchange (ETDEWEB)

    Chow, L S.H.; Johnson, T R

    1978-01-01

    In a coal-fired MHD system, all downstream component surfaces that are exposed to combustion gases will be covered by a solid, liquid, or solid-liquid film of slag, seed, or a mixture of the two, the specific nature of the film depending on the physical properties of the slag and seed and on local conditions. An analysis was made of a partly-liquid slag film flowing on a cooled vertical or horizontal wall of a large duct, through which passed slag-laden combustion gases. The model is applicable to the high-temperature steam generators in the downstream system of an MHD power plant and was used in calculations for a radiant-boiler concept similar to that in the 1000-MWe Gilbert-STD Baseline Plant study and also for units large enough for 230 and 8 lb/s (104.3 and 3.5 kg/s) of combustion gas. The qualitative trends of the results are similar for both vertical and horizontal surfaces. The results show the effects of the slag film, slag properties, and gas emissivity on the heat flux to the steam tubes. The slag film does not reduce the rate of heat transfer in proportion to its surface temperature, because most of the heat is radiated from the gas and particles suspended in it to the slag surface.

  5. Minimal models on Riemann surfaces: The partition functions

    International Nuclear Information System (INIS)

    Foda, O.

    1990-01-01

    The Coulomb gas representation of the A n series of c=1-6/[m(m+1)], m≥3, minimal models is extended to compact Riemann surfaces of genus g>1. An integral representation of the partition functions, for any m and g is obtained as the difference of two gaussian correlation functions of a background charge, (background charge on sphere) x (1-g), and screening charges integrated over the surface. The coupling constant x (compacitification radius) 2 of the gaussian expressions are, as on the torus, m(m+1), and m/(m+1). The partition functions obtained are modular invariant, have the correct conformal anomaly and - restricting the propagation of states to a single handle - one can verify explicitly the decoupling of the null states. On the other hand, they are given in terms of coupled surface integrals, and it remains to show how they degenerate consistently to those on lower-genus surfaces. In this work, this is clear only at the lattice level, where no screening charges appear. (orig.)

  6. Minimal models on Riemann surfaces: The partition functions

    Energy Technology Data Exchange (ETDEWEB)

    Foda, O. (Katholieke Univ. Nijmegen (Netherlands). Inst. voor Theoretische Fysica)

    1990-06-04

    The Coulomb gas representation of the A{sub n} series of c=1-6/(m(m+1)), m{ge}3, minimal models is extended to compact Riemann surfaces of genus g>1. An integral representation of the partition functions, for any m and g is obtained as the difference of two gaussian correlation functions of a background charge, (background charge on sphere) x (1-g), and screening charges integrated over the surface. The coupling constant x (compacitification radius){sup 2} of the gaussian expressions are, as on the torus, m(m+1), and m/(m+1). The partition functions obtained are modular invariant, have the correct conformal anomaly and - restricting the propagation of states to a single handle - one can verify explicitly the decoupling of the null states. On the other hand, they are given in terms of coupled surface integrals, and it remains to show how they degenerate consistently to those on lower-genus surfaces. In this work, this is clear only at the lattice level, where no screening charges appear. (orig.).

  7. A model investigation of annual surface ultraviolet radiation in Iran

    International Nuclear Information System (INIS)

    Sabziparvar, A.-A.

    2003-01-01

    In recent years, there has been some concern regarding solar ultraviolet (UV) radiation received at the earth,s surface because of its biological hazards affecting living organisms. Although the geographical distribution of ground-based UV network is relatively good in some continents,but over Asia, the number of UV instruments are not sufficient for meteorological and biological purposes. Iran, as an Asian country, is also suffering from the lack of UV monitoring network with the exception of one ground-based UV spectrophotometer site (Brower III) at Esfahan. Using a complex radiative transfer model and various meteorological data (for 8 years) such as total column ozone, cloudiness, surface albedo, surface air pressure, relative humidity, visibility and daily total solar radiation (TSR), the geographical distribution of annual integrated biological surface UV irradiances such as UVB, erythema and cataracts are calculated. The comparison is made for cloud-free and all-sky conditions for eight selected cities distributed from the southern tip of the country (25 N-60 E) to the northern border (39 N-48 E). It is shown that the difference between the annual UV at south and north in all-sky condition is larger than the differences in cloud-free condition. The ratio of some biological UV irradiances at southern cities to the same component at northern cities shows a factor of two and more which is quite significant. The possible reasons which might cause such differences are discussed

  8. Allowing for surface preparation in stress corrosion cracking modelling

    International Nuclear Information System (INIS)

    Berge, P.; Buisine, D.; Gelpi, A.

    1997-01-01

    When a 600 alloy component is significantly deformed during installation, by welding, rolling, bending, its stress corrosion cracking in Pressurized Water Nuclear Reactor's primary coolant, is significantly changed by the initial surface treatment. Therefore, the crack initiated time may be reduced by several orders of magnitude for certain surfaces preparations. Allowing for cold working of the surface, for which modelling is proposed, depends less on the degree of cold work then on the depths of the hardened layers. Honing hardens the metal over depths of about one micron for vessel head penetrations, for example, and has little influence on subsequent behaviour after the part deforms. On the other hand, coarser turning treatment produces cold worked layers which can reach several tens of microns and can very significantly reduce the initiation time compared to fine honing. So evaluation after depths of hardening is vital on test pieces for interpreting laboratory results as well as on service components for estimating their service life. Suppression by mechanical or chemical treatment of these layers, after deformation, seems to be the most appropriate solution for reducing over-stressing connected with surface treatment carried out before deformation. (author)

  9. Design of a Three Surfaces R/C Aircraft Model

    Directory of Open Access Journals (Sweden)

    D. P. Coiro

    2002-01-01

    Full Text Available Design of a three lifting surfaces radio-controlled model has been carried out at Dipartimento di Progettazione Aeronautica (DPA by the authors in the last year. The model is intended to be a UAV prototype and is now under construction. The main goal of this small aircraft's design is to check the influence of the canard surface on the aircraft's aerodynamic characteristics and flight behavior, especially at high angles of attack. The aircraft model is also intended to be a flying platform to test sensors, measurement and acquisition systems for research purposes and a valid and low-cost teaching instrument for flight dynamics and flight maneuvering. The aircraft has been designed to fly with and without canard, and all problems relative to aircraft balance and stability have been carefully analyzed and solved. The innovative configuration and the mixed wooden-composite material structure has been obtained with very simple shapes and all the design is focused on realizing a low-cost model. A complete aerodynamic analysis of the configuration up to high angles of attack and a preliminary aircraft stability and performance prediction will be presented.

  10. Modeling land-surface/atmosphere dynamics for CHAMMP

    International Nuclear Information System (INIS)

    Gutowski, W.J. Jr.

    1993-01-01

    Project progress is described on a DOE CHAMP project to model the land-surface/atmosphere coupling in a heterogeneous environment. This work is a collaboration between scientists at Iowa State University and the University of New Hampshire. Work has proceeded in two areas: baseline model coupling and data base development for model validation. The core model elements (land model, atmosphere model) have been ported to the Principal Investigator's computing system and baseline coupling has commenced. The initial target data base is the set of observations from the FIFE field campaign, which is in the process of being acquired. For the remainder of the project period, additional data from the region surrounding the FIFE site and from other field campaigns will be acquired to determine how to best extrapolate results from the initial target region to the rest of the globe. In addition, variants of the coupled model will be used to perform experiments examining resolution requirements and coupling strategies for land-atmosphere coupling in a heterogeneous environment

  11. DSM-III and the transformation of American psychiatry: a history.

    Science.gov (United States)

    Wilson, M

    1993-03-01

    The author traces the history of the development of DSM-III within the larger context--intellectual, economic, scientific, and ideological--of the development of American psychiatry since World War II. Data were obtained through a literature review, investigation of archival material from the DSM-III task force and APA, and interviews with key participants. This research indicates that from the end of World War II until the mid-1970s, a broadly conceived biopsychosocial model, informed by psychoanalysis, sociological thinking, and biological knowledge, was the organizing model for American psychiatry. However, the biopsychosocial model did not clearly demarcate the mentally well from the mentally ill, and this failure led to a crisis in the legitimacy of psychiatry by the 1970s. The publication of DSM-III in 1980 represented an answer to this crisis, as the essential focus of psychiatric knowledge shifted from the clinically-based biopsychosocial model to a research-based medical model. The author concludes that while DSM-III, and the return to descriptive psychiatry which it inaugurated, has had positive consequences for the profession, at the same time it represents a significant narrowing of psychiatry's clinical gaze.

  12. Mental suffering and the DSM-5: a critical review.

    Science.gov (United States)

    Vanheule, Stijn; Devisch, Ignaas

    2014-12-01

    The definition of mental disorder included in the Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition (DSM-5), indicates that mental disorders are usually associated with significant distress. However, the handbook is vague with respect to whether distress is crucial to the diagnosis of mental disorders, and a conceptual framework on the precise nature of distress is lacking. As a result, it remains vague how the term 'distress' is to be taken into account in actual diagnostic situations: the DSM-5 provides no operational framework for diagnosing distress. The authors argue that the work of Georges Canguilhem, who focuses on the topic of abnormality and pathology, and Paul Ricoeur's philosophical reflections on the theme of mental suffering may provide a structure for conceptualizing and evaluating distress. Ricoeur's phenomenological model of mental suffering is discussed. Here, mental suffering can be thought of in terms of the relationship between self and other, and also in terms of the continuum made up by, what he terms, languishing and acting. Ricoeur suggests that distress is not a quantity that can be measured, but a characteristic that should be studied qualitatively in interpersonal and narrative contexts. Consequently, diagnosticians should describe and document how individuals experience subjective distress. On a practical level, this means that clinicians' ideas about patients' distress should be embedded in case formulations. A detailed evaluation of an individual's pathos-experience should be made before conclusions are drawn with regard to diagnosis. © 2014 John Wiley & Sons, Ltd.

  13. Reliability and validity of the personality inventory for DSM-5 (PID-5): predicting DSM-IV personality disorders and psychopathy in community-dwelling Italian adults.

    Science.gov (United States)

    Fossati, Andrea; Krueger, Robert F; Markon, Kristian E; Borroni, Serena; Maffei, Cesare

    2013-12-01

    In order to assess the internal consistency, factor structure, and ability to recover DSM-IV personality disorders (PDs) of the Personality Inventory for DSM-5 (PID-5) scales, 710 Italian adult community dwelling volunteers were administered the Italian translation of the PID-5, as well as the Italian translation of the Personality Diagnostic Questionnaire-4+ (PDQ-4+). Cronbach's alpha values were >.70 for all PID-5 facet scales and greater than .90 for all PID-5 domain scales. Parallel analysis and confirmatory factor analysis supported the theoretical five-factor model of the PID-5 trait scales. Regression analyses showed that both PID-5 trait and domain scales explained a substantial amount of variance in the PDQ-4+ PD scales, with the exception of the Passive-Aggressive PD scale. When the PID-5 was administered to a second independent sample of 389 Italian adult community dwelling volunteers, the basic psychometric properties of the scale were replicated. In this second sample, the PID-5 trait and domain scales proved to be significant predictors of psychopathy measures. As a whole, the results of the present study support the hypothesis that the PID-5 is a reliable instrument which is able to recover DSM-IV PDs, as well as to capture personality pathology that is not included in the DSM-IV (namely, psychopathy).

  14. Modelling of the initial stage of the surface discharge development

    International Nuclear Information System (INIS)

    Gibalov, V.; Pietsch, G.

    1998-01-01

    Computer modelling of the initial stage of the surface discharge was performed by solving numerically the coupled continuity, the Poisson and Townsend ionization equations and taking into account the ionization, attachment and detachment processes. The potential distribution at the dielectric surface and at the boundaries which surround the integration region have been calculated with the charge-image method in a 3D approach. In order to eliminate numerical diffusion effects, the solution of the continuity equation was corrected using a flux correction transport routine. At the positive voltage the development of the discharge channel is determined mainly by the shape of the electrode tip. At the negative voltage the following phases of the discharge may be distinguished: the initial phase, the cathode directed streamer phase resulting in the cathode layer formation, and the propagating phase. The physical processes governing each discharge phase are described in detail. (J.U.)

  15. DSM-5 under-Identifies PDDNOS: Diagnostic Agreement between the DSM-5, DSM-IV, and Checklist for Autism Spectrum Disorder

    Science.gov (United States)

    Mayes, Susan Dickerson; Black, Amanda; Tierney, Cheryl D.

    2013-01-01

    Agreement between the DSM-5, DSM-IV, and Checklist for Autism Spectrum Disorder was assessed in 125 children with autism spectrum disorder (ASD), which included high and low functioning autism (HFA and LFA) and pervasive developmental disorder not otherwise specified (PDDNOS), and children with other clinical disorders (e.g., ADHD, mental…

  16. Modeling Surface Water Flow in the Atchafalaya Basin

    Science.gov (United States)

    Liu, K.; Simard, M.

    2017-12-01

    While most of the Mississippi River Delta is sinking due to insufficient sediment supply and subsidence, the stable wetlands and the prograding delta systems in the Atchafalaya Basin provide a unique opportunity to study the constructive interactions between riverine and marine forcings and their impacts upon coastal morphology. To better understand the hydrodynamics in this region, we developed a numerical modeling system for the water flow through the river channel - deltas - wetlands networks in the Atchafalaya Basin. Determining spatially varying model parameters for a large area composed of such diverse land cover types poses a challenge to developing an accurate numerical model. For example, the bottom friction coefficient can not be measured directly and the available elevation maps for the wetlands in the basin are inaccurate. To overcome these obstacles, we developed the modeling system in three steps. Firstly, we modeled river bathymetry based on in situ sonar transects and developed a simplified 1D model for the Wax Lake Outlet using HEC-RAS. Secondly, we used a Bayesian approach to calibrate the model automatically and infer important unknown parameters such as riverbank elevation and bottom friction coefficient through Markov Chain Monte Carlo (MCMC) simulations. We also estimated the wetland elevation based on the distribution of different vegetation species in the basin. Thirdly, with the lessons learnt from the 1D model, we developed a depth-averaged 2D model for the whole Atchafalaya Basin using Delft3D. After calibrations, the model successfully reproduced the water levels measured at five gauges in the Wax Lake Outlet and the modeled water surface profile along the channel agreed reasonably well with our LIDAR measurements. In addition, the model predicted a one-hour delay in tidal phase from the Wax Lake Delta to the upstream gauge. In summary, this project presents a procedure to initialize hydrology model parameters that integrates field

  17. Assessing modeled Greenland surface mass balance in the GISS Model E2 and its sensitivity to surface albedo

    Science.gov (United States)

    Alexander, Patrick; LeGrande, Allegra N.; Koenig, Lora S.; Tedesco, Marco; Moustafa, Samiah E.; Ivanoff, Alvaro; Fischer, Robert P.; Fettweis, Xavier

    2016-04-01

    The surface mass balance (SMB) of the Greenland Ice Sheet (GrIS) plays an important role in global sea level change. Regional Climate Models (RCMs) such as the Modèle Atmosphérique Régionale (MAR) have been employed at high spatial resolution with relatively complex physics to simulate ice sheet SMB. Global climate models (GCMs) incorporate less sophisticated physical schemes and provide outputs at a lower spatial resolution, but have the advantage of modeling the interaction between different components of the earth's oceans, climate, and land surface at a global scale. Improving the ability of GCMs to represent ice sheet SMB is important for making predictions of future changes in global sea level. With the ultimate goal of improving SMB simulated by the Goddard Institute for Space Studies (GISS) Model E2 GCM, we compare simulated GrIS SMB against the outputs of the MAR model and radar-derived estimates of snow accumulation. In order to reproduce present-day climate variability in the Model E2 simulation, winds are constrained to match the reanalysis datasets used to force MAR at the lateral boundaries. We conduct a preliminary assessment of the sensitivity of the simulated Model E2 SMB to surface albedo, a parameter that is known to strongly influence SMB. Model E2 albedo is set to a fixed value of 0.8 over the entire ice sheet in the initial configuration of the model (control case). We adjust this fixed value in an ensemble of simulations over a range of 0.4 to 0.8 (roughly the range of observed summer GrIS albedo values) to examine the sensitivity of ice-sheet-wide SMB to albedo. We prescribe albedo from the Moderate Resolution Imaging Spectroradiometer (MODIS) MCD43A3 v6 to examine the impact of a more realistic spatial and temporal variations in albedo. An age-dependent snow albedo parameterization is applied, and its impact on SMB relative to observations and the RCM is assessed.

  18. Improvements to a Response Surface Thermal Model for Orion

    Science.gov (United States)

    Miller, Stephen W.; Walker, William Q.

    2011-01-01

    A study was performed to determine if a Design of Experiments (DOE)/Response Surface Methodology could be applied to on-orbit thermal analysis and produce a set of Response Surface Equations (RSE) that predict Orion vehicle temperatures within 10 F. The study used the Orion Outer Mold Line model. Five separate factors were identified for study: yaw, pitch, roll, beta angle, and the environmental parameters. Twenty-three external Orion components were selected and their minimum and maximum temperatures captured over a period of two orbits. Thus, there are 46 responses. A DOE case matrix of 145 runs was developed. The data from these cases were analyzed to produce a fifth order RSE for each of the temperature responses. For the 145 cases in the DOE matrix, the agreement between the engineering data and the RSE predictions was encouraging with 40 of the 46 RSEs predicting temperatures within the goal band. However, the verification cases showed most responses did not meet the 10 F goal. After reframing the focus of the study to better align the RSE development with the purposes of the model, a set of RSEs for both the minimum and maximum radiator temperatures was produced which predicted the engineering model output within +/-4 F. Therefore, with the correct application of the DOE/RSE methodology, RSEs can be developed that provide analysts a fast and easy way to screen large numbers of environments and assess proposed changes to the RSE factors.

  19. Axisymmetric Lattice Boltzmann Model of Droplet Impact on Solid Surfaces

    Science.gov (United States)

    Dalgamoni, Hussein; Yong, Xin

    2017-11-01

    Droplet impact is a ubiquitous fluid phenomena encountered in scientific and engineering applications such as ink-jet printing, coating, electronics manufacturing, and many others. It is of great technological importance to understand the detailed dynamics of drop impact on various surfaces. The lattice Boltzmann method (LBM) emerges as an efficient method for modeling complex fluid systems involving rapidly evolving fluid-fluid and fluid-solid interfaces with complex geometries. In this work, we model droplet impact on flat solid substrates with well-defined wetting behavior using a two-phase axisymmetric LBM with high density and viscosity contrasts. We extend the two-dimensional Lee and Liu model to capture axisymmetric effect in the normal impact. First we compare the 2D axisymmetric results with the 2D and 3D results reported by Lee and Liu to probe the effect of axisymmetric terms. Then, we explore the effects of Weber number, Ohnesorge number, and droplet-surface equilibrium contact angle on the impact. The dynamic contact angle and spreading factor of the droplet during impact are investigated to qualitatively characterize the impact dynamics.

  20. Coupling a groundwater model with a land surface model to improve water and energy cycle simulation

    Directory of Open Access Journals (Sweden)

    W. Tian

    2012-12-01

    Full Text Available Water and energy cycles interact, making these two processes closely related. Land surface models (LSMs can describe the water and energy cycles on the land surface, but their description of the subsurface water processes is oversimplified, and lateral groundwater flow is ignored. Groundwater models (GWMs describe the dynamic movement of the subsurface water well, but they cannot depict the physical mechanisms of the evapotranspiration (ET process in detail. In this study, a coupled model of groundwater flow with a simple biosphere (GWSiB is developed based on the full coupling of a typical land surface model (SiB2 and a 3-D variably saturated groundwater model (AquiferFlow. In this coupled model, the infiltration, ET and energy transfer are simulated by SiB2 using the soil moisture results from the groundwater flow model. The infiltration and ET results are applied iteratively to drive the groundwater flow model. After the coupled model is built, a sensitivity test is first performed, and the effect of the groundwater depth and the hydraulic conductivity parameters on the ET are analyzed. The coupled model is then validated using measurements from two stations located in shallow and deep groundwater depth zones. Finally, the coupled model is applied to data from the middle reach of the Heihe River basin in the northwest of China to test the regional simulation capabilities of the model.

  1. Sensitivity and Specificity of Proposed DSM-5 Criteria for Autism Spectrum Disorder in Toddlers

    Science.gov (United States)

    Barton, Marianne L.; Robins, Diana L.; Jashar, Dasal; Brennan, Laura; Fein, Deborah

    2013-01-01

    Autism spectrum disorder (ASD) diagnosis is based on behavioral presentation; changes in conceptual models or defining behaviors may significantly impact diagnosis and uptake of ASD-specific interventions. The literature examining impact of DSM-5 criteria is equivocal. Toddlers may be especially vulnerable to the stringent requirements of…

  2. Bone density, body composition, and psychopathology of anorexia nervosa spectrum disorders in DSM-IV vs DSM-5

    Science.gov (United States)

    Schorr, Melanie; Thomas, Jennifer J.; Eddy, Kamryn T.; Dichtel, Laura E.; Lawson, Elizabeth A.; Meenaghan, Erinne; Paskal, Margaret Lederfine; Fazeli, Pouneh K.; Faje, Alexander T.; Misra, Madhusmita; Klibanski, Anne; Miller, Karen K.

    2016-01-01

    Objective DSM-5 revised diagnostic criteria for anorexia nervosa (AN) by eliminating the amenorrhea requirement, liberalizing weight and psychological criteria, and adding the formal diagnosis of “atypical AN” for individuals with AN psychological symptoms without low weight. We sought to determine whether bone density (BMD) is impaired in women diagnosed with AN using the new, more liberal DSM-5 criteria. Method Cross-sectional study of 168 women, 18–45y: 1) AN by DSM-IV (DSM-IV)(n=37), 2) AN by DSM-5 but not DSM-IV criteria (DSM-5)(n=33), 3) atypical AN (ATYPICAL)(n=77), 4) healthy comparison group (HC)(n=21). Measurements included dual energy x-ray absorptiometry, Eating Disorder Examination-Questionnaire, Eating Disorder Inventory-2, Hamilton Depression and Anxiety Rating Scales. Results BMD Z-score DSM-5, and 69% of ATYPICAL. Mean Z-scores were comparably low in DSM-IV and DSM-5, intermediate in ATYPICAL, and highest in HC. Lack of prior low weight or amenorrhea was, but history of overweight/obesity was not, protective against bone loss. Mean lean mass and percent fat mass were significantly lower in all AN groups than HC. DSM-IV, DSM-5 and ATYPICAL had comparable psychopathology. Discussion Despite liberalizing diagnostic criteria, many women diagnosed with AN and atypical AN using DSM-5 criteria have low BMD. Presence or history of low weight and/or amenorrhea remain important indications for DXA. Loss of lean mass, in addition to fat mass, is present in all AN groups, and may contribute to low BMD. The deleterious effect of eating disorders on BMD extends beyond those with current low weight and amenorrhea. PMID:27527115

  3. Surface complexation models for uranium adsorption in the sub-surface environment

    International Nuclear Information System (INIS)

    Payne, T.E.

    2007-01-01

    Adsorption experiments with soil component minerals under a range of conditions are being used to develop models of uranium(VI) uptake in the sub-surface environment. The results show that adsorption of U on iron oxides and clay minerals is influenced by chemical factors including the pH, partial pressure of CO 2 , and the presence of ligands such as phosphate. Surface complexation models (SCMs) can be used to simulate U adsorption on these minerals. The SCMs are based on plausible mechanistic assumptions and describe the experimental data more adequately than Kd values or sorption isotherms. It is conceptually possible to simulate U sorption data on complex natural samples by combining SCMs for individual component minerals. This approach was used to develop a SCM for U adsorption to mineral assemblages from Koongarra (Australia), and produced a reasonable description of U uptake. In order to assess the applicability of experimental data to the field situation, in-situ measurements of U distributions between solid and liquid phases were undertaken at the Koongarra U deposit. This field partitioning data showed a satisfactory agreement with laboratory sorption data obtained under comparable conditions. (author)

  4. Non-linear sigma models on arbitrary genus Riemann surfaces

    International Nuclear Information System (INIS)

    Aldazabal, G.; Diaz, A.H.; Zhang, R.B.

    1987-05-01

    A Ward-Takahashi type identity is obtained for two insertions of the energy-momentum tensor of the non-linear sigma model on an arbitrary Riemann surface. The identity shows explicitly how the Virasoro algebra is violated by spurious terms generated by the trace anomaly. Requiring these terms to vanish leads to a set of constraints on the graviton and dilaton background fields, which are necessary for the algebra to be restored. Although the modular parameters play an important role in the computation, the background field equations turn out to be genus independent up to order α'. (author). 10 refs, 2 figs

  5. Computer Modeling of Planetary Surface Temperatures in Introductory Astronomy Courses

    Science.gov (United States)

    Barker, Timothy; Goodman, J.

    2013-01-01

    Barker, T., and Goodman, J. C., Wheaton College, Norton, MA Computer modeling is an essential part of astronomical research, and so it is important that students be exposed to its powers and limitations in the first (and, perhaps, only) astronomy course they take in college. Building on the ideas of Walter Robinson (“Modeling Dynamic Systems,” Springer, 2002) we have found that STELLA software (ISEE Systems) allows introductory astronomy students to do sophisticated modeling by the end of two classes of instruction, with no previous experience in computer programming or calculus. STELLA’s graphical interface allows students to visualize systems in terms of “flows” in and out of “stocks,” avoiding the need to invoke differential equations. Linking flows and stocks allows feedback systems to be constructed. Students begin by building an easily understood system: a leaky bucket. This is a simple negative feedback system in which the volume in the bucket (a “stock”) depends on a fixed inflow rate and an outflow that increases in proportion to the volume in the bucket. Students explore how changing inflow rate and feedback parameters affect the steady-state volume and equilibration time of the system. This model is completed within a 50-minute class meeting. In the next class, students are given an analogous but more sophisticated problem: modeling a planetary surface temperature (“stock”) that depends on the “flow” of energy from the Sun, the planetary albedo, the outgoing flow of infrared radiation from the planet’s surface, and the infrared return from the atmosphere. Students then compare their STELLA model equilibrium temperatures to observed planetary temperatures, which agree with model ones for worlds without atmospheres, but give underestimates for planets with atmospheres, thus introducing students to the concept of greenhouse warming. We find that if we give the students part of this model at the start of a 50-minute class they are

  6. Understanding sexual, paraphilic, and gender dysphoria disorders in DSM-5.

    Science.gov (United States)

    DeFeo, Jennifer

    2015-01-01

    With every Diagnostic and Statistical Manual of Mental Disorders that has been published, there has been controversy within controversy; however, what appears to be lacking is the importance of truly understanding what, why, and how the changes impact the community at large. Issues such as homosexuality, the five axial diagnostic system, and transitioning from a medical model to a biopsychosocial model have been hot topics that have led clinicians to challenge the reliability and validity of the manual throughout history. As clinicians and medical professionals, it is important to objectively look at the manual and become educated on how and why these changes exist. With that being said, this commentary aims to challenge the article " Problems with the Sexual Disorders Sections of DSM-5" by Colin A. Ross (2015). The structure of this commentary purposefully mirrors the structure of the commentary that it is challenging.

  7. Model Selection and Quality Estimation of Time Series Models for Artificial Technical Surface Generation

    Directory of Open Access Journals (Sweden)

    Matthias Eifler

    2017-12-01

    Full Text Available Standard compliant parameter calculation in surface topography analysis takes the manufacturing process into account. Thus, the measurement technician can be supported with automated suggestions for preprocessing, filtering and evaluation of the measurement data based on the character of the surface topography. Artificial neuronal networks (ANN are one approach for the recognition or classification of technical surfaces. However the required set of training data for ANN is often not available, especially when data acquisition is time consuming or expensive—as e.g., measuring surface topography. Thus, generation of artificial (simulated data becomes of interest. An approach from time series analysis is chosen and examined regarding its suitability for the description of technical surfaces: the ARMAsel model, an approach for time series modelling which is capable of choosing the statistical model with the smallest prediction error and the best number of coefficients for a certain surface. With a reliable model which features the relevant stochastic properties of a surface, a generation of training data for classifiers of artificial neural networks is possible. Based on the determined ARMA-coefficients from the ARMAsel-approach, with only few measured datasets many different artificial surfaces can be generated which can be used for training classifiers of an artificial neural network. In doing so, an improved calculation of the model input data for the generation of artificial surfaces is possible as the training data generation is based on actual measurement data. The trained artificial neural network is tested with actual measurement data of surfaces that were manufactured with varying manufacturing methods and a recognition rate of the according manufacturing principle between 60% and 78% can be determined. This means that based on only few measured datasets, stochastic surface information of various manufacturing principles can be extracted

  8. A multi-surface plasticity model for ductile fracture simulations

    Science.gov (United States)

    Keralavarma, Shyam M.

    2017-06-01

    The growth and coalescence of micro-voids in a material undergoing ductile fracture depends strongly on the loading path. Void growth occurs by diffuse plasticity in the material and is sensitive to the hydrostatic stress, while void coalescence occurs by the localization of plastic deformation in the inter-void ligaments under a combination of normal and shear stresses on the localization plane. In this paper, a micromechanics-based plasticity model is developed for an isotropic porous material, accounting for both diffuse and localized modes of plasticity at the micro-scale. A multi-surface approach is adopted, and two existing plasticity models that separately account for the two modes of yielding, above, are synthesized to propose an effective isotropic yield criterion and associated state evolution equations. The yield criterion is validated by comparison with quasi-exact numerical yield loci computed using a finite elements based limit analysis procedure. It is shown that the new criterion is in better agreement with the numerical loci than the Gurson model, particularly for large values of the porosity for which the loading path dependence of the yield stress is well predicted by the new model. Even at small porosities, it is shown that the new model predicts marginally lower yield stresses under low triaxiality shear dominated loadings compared to the Gurson model, in agreement with the numerical limit analysis data. Predictions for the strains to the onset of coalescence under proportional loading, obtained by numerically integrating the model, indicate that void coalescence tends to occur at relatively small plastic strain and porosity levels under shear dominated loadings. Implications on the prediction of ductility using the new model in fracture simulations are discussed.

  9. Boussinesq modeling of surface waves due to underwater landslides

    Directory of Open Access Journals (Sweden)

    D. Dutykh

    2013-05-01

    Full Text Available Consideration is given to the influence of an underwater landslide on waves at the surface of a shallow body of fluid. The equations of motion that govern the evolution of the barycenter of the landslide mass include various dissipative effects due to bottom friction, internal energy dissipation, and viscous drag. The surface waves are studied in the Boussinesq scaling, with time-dependent bathymetry. A numerical model for the Boussinesq equations is introduced that is able to handle time-dependent bottom topography, and the equations of motion for the landslide and surface waves are solved simultaneously. The numerical solver for the Boussinesq equations can also be restricted to implement a shallow-water solver, and the shallow-water and Boussinesq configurations are compared. A particular bathymetry is chosen to illustrate the general method, and it is found that the Boussinesq system predicts larger wave run-up than the shallow-water theory in the example treated in this paper. It is also found that the finite fluid domain has a significant impact on the behavior of the wave run-up.

  10. Inter-Observer Reliability of DSM-5 Substance Use Disorders*

    Science.gov (United States)

    Denis, Cécile M.; Gelernter, Joel; Hart, Amy B.; Kranzler, Henry R.

    2015-01-01

    Aims Although studies have examined the impact of changes made in DSM-5 on the estimated prevalence of substance use disorder (SUD) diagnoses, there is limited evidence of the reliability of DSM-5 SUDs. We evaluated the inter-observer reliability of four DSM-5 SUDs in a sample in which we had previously evaluated the reliability of DSM-IV diagnoses, allowing us to compare the two systems. Methods Two different interviewers each assessed 173 subjects over a 2-week period using the Semi-Structured Assessment for Drug Dependence and Alcoholism (SSADDA). Using the percent agreement and kappa (κ) coefficient, we examined the reliability of DSM-5 lifetime alcohol, opioid, cocaine, and cannabis use disorders, which we compared to that of SSADDA-derived DSM-IV SUD diagnoses. We also assessed the effect of additional lifetime SUD and lifetime mood or anxiety disorder diagnoses on the reliability of the DSM-5 SUD diagnoses. Results Reliability was good to excellent for the four disorders, with κ values ranging from 0.65 to 0.94. Agreement was consistently lower for SUDs of mild severity than for moderate or severe disorders. DSM-5 SUD diagnoses showed greater reliability than DSM-IV diagnoses of abuse or dependence or dependence only. Co-occurring SUD and lifetime mood or anxiety disorders exerted a modest effect on the reliability of the DSM-5 SUD diagnoses. Conclusions For alcohol, opioid, cocaine and cannabis use disorders, DSM-5 criteria and diagnoses are at least as reliable as those of DSM-IV. PMID:26048641

  11. Inter-observer reliability of DSM-5 substance use disorders.

    Science.gov (United States)

    Denis, Cécile M; Gelernter, Joel; Hart, Amy B; Kranzler, Henry R

    2015-08-01

    Although studies have examined the impact of changes made in DSM-5 on the estimated prevalence of substance use disorder (SUD) diagnoses, there is limited evidence concerning the reliability of DSM-5 SUDs. We evaluated the inter-observer reliability of four DSM-5 SUDs in a sample in which we had previously evaluated the reliability of DSM-IV diagnoses, allowing us to compare the two systems. Two different interviewers each assessed 173 subjects over a 2-week period using the Semi-Structured Assessment for Drug Dependence and Alcoholism (SSADDA). Using the percent agreement and kappa (κ) coefficient, we examined the reliability of DSM-5 lifetime alcohol, opioid, cocaine, and cannabis use disorders, which we compared to that of SSADDA-derived DSM-IV SUD diagnoses. We also assessed the effect of additional lifetime SUD and lifetime mood or anxiety disorder diagnoses on the reliability of the DSM-5 SUD diagnoses. Reliability was good to excellent for the four disorders, with κ values ranging from 0.65 to 0.94. Agreement was consistently lower for SUDs of mild severity than for moderate or severe disorders. DSM-5 SUD diagnoses showed greater reliability than DSM-IV diagnoses of abuse or dependence or dependence only. Co-occurring SUD and lifetime mood or anxiety disorders exerted a modest effect on the reliability of the DSM-5 SUD diagnoses. For alcohol, opioid, cocaine and cannabis use disorders, DSM-5 criteria and diagnoses are at least as reliable as those of DSM-IV. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  12. Diagnosing the DSM: Diagnostic Classification Needs Fundamental Reform

    OpenAIRE

    Hyman, Steven E.

    2011-01-01

    Editor?s Note: If all goes as planned, the American Psychiatric Association will release a new Diagnostic and Statistical Manual of Mental Disorders (DSM-5) in May 2013. Since 1980, the DSM has provided a shared diagnostic language to clinicians, patients, scientists, school systems, courts, and pharmaceutical and insurance companies; any changes to the influential manual will have serious ramifications. But, argues Dr. Steven Hyman, the DSM is a poor mirror of clinical and biological realiti...

  13. Subjective surfaces: a geometric model for boundary completion

    Energy Technology Data Exchange (ETDEWEB)

    Sarti, Alessandro; Malladi, Ravi; Sethian, J.A.

    2000-06-01

    We present a geometric model and a computational method for segmentation of images with missing boundaries. In many situations, the human visual system fills in missing gaps in edges and boundaries, building and completing information that is not present. Boundary completion presents a considerable challenge in computer vision, since most algorithms attempt to exploit existing data. A large body of work concerns completion models, which postulate how to construct missing data; these models are often trained and specific to particular images. In this paper, we take the following, alternative perspective: we consider a reference point within an image as given, and then develop an algorithm which tries to build missing information on the basis of the given point of view and the available information as boundary data to the algorithm. Starting from this point of view, a surface is constructed. It is then evolved with the mean curvature flow in the metric induced by the image until a piecewise constant solution is reached. We test the computational model on modal completion, amodal completion, texture, photo and medical images. We extend the geometric model and the algorithm to 3D in order to extract shapes from low signal/noise ratio medical volumes. Results in 3D echocardiography and 3D fetal echography are presented.

  14. DSM-IV defined conduct disorder and oppositional defiant disorder: an investigation of shared liability in female twins.

    Science.gov (United States)

    Knopik, V S; Bidwell, L C; Flessner, C; Nugent, N; Swenson, L; Bucholz, K K; Madden, P A F; Heath, A C

    2014-04-01

    DSM-IV specifies a hierarchal diagnostic structure such that an oppositional defiant disorder (ODD) diagnosis is applied only if criteria are not met for conduct disorder (CD). Genetic studies of ODD and CD support a combination of shared genetic and environmental influences but largely ignore the imposed diagnostic structure. We examined whether ODD and CD share an underlying etiology while accounting for DSM-IV diagnostic specifications. Data from 1446 female twin pairs, aged 11-19 years, were fitted to two-stage models adhering to the DSM-IV diagnostic hierarchy. The models suggested that DSM-IV ODD-CD covariation is attributed largely to shared genetic influences. This is the first study, to our knowledge, to examine genetic and environmental overlap among these disorders while maintaining a DSM-IV hierarchical structure. The findings reflect primarily shared genetic influences and specific (i.e. uncorrelated) shared/familial environmental effects on these DSM-IV-defined behaviors. These results have implications for how best to define CD and ODD for future genetically informed analyses.

  15. Transitioning from DSM-IV to DSM-5: A systematic review of eating disorder prevalence assessment.

    Science.gov (United States)

    Lindvall Dahlgren, Camilla; Wisting, Line

    2016-11-01

    The objective of this study was to systematically review the literature on assessment of eating disorder prevalence during the DSM-IV era (1994-2015). A PubMed search was conducted targeting articles on prevalence, incidence and epidemiology of eating disorders. The review was performed in accordance with PRISMA guidelines, and was limited to DSM-IV based eating disorder diagnoses published between 1994 and 2015. A total of 74 studies fulfilled inclusion criteria and were included in the study. Results yielded evidence of over 40 different assessment instruments used to assess eating disorder prevalence, with the EAT-40 being the most commonly used screening instrument, and the SCID being the most frequently used interview. The vast majority of studies employed two-stage designs, closely followed by clinical interviews. Observations of higher prevalence rates were found in studies employing self-reports compared to two-stage designs and interviews. Eating disorder prevalence rates have varied significantly during the DSM-IV era, and are dependent on assessment methods used and samples investigated. Following the transition to the DSM-5, eating disorder prevalence will change, warranting novel approaches to assessment and treatment planning. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  16. Modelling of long term nitrogen retention in surface waters

    Science.gov (United States)

    Halbfaß, S.; Gebel, M.; Bürger, S.

    2010-12-01

    In order to derive measures to reduce nutrient loadings into waters in Saxony, we calculated nitrogen inputs with the model STOFFBILANZ on the regional scale. Thereby we have to compare our modelling results to measured loadings at the river basin outlets, considering long term nutrient retention in surface waters. The most important mechanism of nitrogen retention is the denitrification in the contact zone of water and sediment, being controlled by hydraulic and micro-biological processes. Retention capacity is derived on the basis of the nutrient spiralling concept, using water residence time (hydraulic aspect) and time-specific N-uptake by microorganisms (biological aspect). Short time related processes of mobilization and immobilization are neglected, because they are of minor importance for the derivation of measures on the regional scale.

  17. Core surface flow modelling from high-resolution secular variation

    DEFF Research Database (Denmark)

    Holme, R.; Olsen, Nils

    2006-01-01

    -flux hypothesis, but the spectrum of the SV implies that a conclusive test of frozen-flux is not possible. We parametrize the effects of diffusion as an expected misfit in the flow prediction due to departure from the frozen-flux hypothesis; at low spherical harmonic degrees, this contribution dominates...... the expected departure of the SV predictions from flow to the observed SV, while at high degrees the SV model uncertainty is dominant. We construct fine-scale core surface flows to model the SV. Flow non-uniqueness is a serious problem because the flows are sufficiently small scale to allow flow around non......-series of magnetic data and better parametrization of the external magnetic field....

  18. Modeling global distribution of agricultural insecticides in surface waters.

    Science.gov (United States)

    Ippolito, Alessio; Kattwinkel, Mira; Rasmussen, Jes J; Schäfer, Ralf B; Fornaroli, Riccardo; Liess, Matthias

    2015-03-01

    Agricultural insecticides constitute a major driver of animal biodiversity loss in freshwater ecosystems. However, the global extent of their effects and the spatial extent of exposure remain largely unknown. We applied a spatially explicit model to estimate the potential for agricultural insecticide runoff into streams. Water bodies within 40% of the global land surface were at risk of insecticide runoff. We separated the influence of natural factors and variables under human control determining insecticide runoff. In the northern hemisphere, insecticide runoff presented a latitudinal gradient mainly driven by insecticide application rate; in the southern hemisphere, a combination of daily rainfall intensity, terrain slope, agricultural intensity and insecticide application rate determined the process. The model predicted the upper limit of observed insecticide exposure measured in water bodies (n = 82) in five different countries reasonably well. The study provides a global map of hotspots for insecticide contamination guiding future freshwater management and conservation efforts. Copyright © 2014 Elsevier Ltd. All rights reserved.

  19. Convergence of surface diffusion parameters with model crystal size

    Science.gov (United States)

    Cohen, Jennifer M.; Voter, Arthur F.

    1994-07-01

    A study of the variation in the calculated quantities for adatom diffusion with respect to the size of the model crystal is presented. The reported quantities include surface diffusion barrier heights, pre-exponential factors, and dynamical correction factors. Embedded atom method (EAM) potentials were used throughout this effort. Both the layer size and the depth of the crystal were found to influence the values of the Arrhenius factors significantly. In particular, exchange type mechanisms required a significantly larger model than standard hopping mechanisms to determine adatom diffusion barriers of equivalent accuracy. The dynamical events that govern the corrections to transition state theory (TST) did not appear to be as sensitive to crystal depth. Suitable criteria for the convergence of the diffusion parameters with regard to the rate properties are illustrated.

  20. A genetic perspective on the proposed inclusion of cannabis withdrawal in the DSM-5

    Science.gov (United States)

    Verweij, K.J.H.; Agrawal, A.; Nat, N.O.; Creemers, H.E.; Huizink, A.C.; Martin, N.G.; Lynskey, M.T.

    2013-01-01

    Background Various studies support the inclusion of cannabis withdrawal to the diagnosis of cannabis use disorders in the upcoming DSM-5. The aims of the current study were to (1) estimate the prevalence of DSM-5 cannabis withdrawal (Criterion B), (2) estimate the role of genetic and environmental influences on individual differences in cannabis withdrawal, and (3) determine the extent to which genetic and environmental influences on cannabis withdrawal overlap with those on DSM-IV defined abuse/dependence. Methods The sample included 2276 lifetime cannabis-using adult Australian twins. Cannabis withdrawal was defined in accordance with Criterion B of the proposed DSM-5 revisions. Cannabis abuse/dependence was defined as endorsing one or more DSM-IV criteria of abuse or three or more dependence criteria. The classical twin model was used to estimate the genetic and environmental influences on variation in cannabis withdrawal, as well as its covariation with abuse/dependence. Results Of all cannabis users 11.9% met criteria for cannabis withdrawal. Around 50% of between-individual variation in withdrawal could be attributed to additive genetic variation, and the rest of the variation was mostly due to non-shared environmental influences. Importantly, the genetic influences on cannabis withdrawal almost completely (99%) overlapped with those on abuse/dependence. Conclusions We showed that cannabis withdrawal symptoms exist among cannabis users, and that cannabis withdrawal is moderately heritable. Genetic influences on cannabis withdrawal are the same as those influencing abuse/dependence. These results add to the wealth of literature that recommends the addition of cannabis withdrawal to the diagnosis of DSM-5 cannabis use disorders. PMID:23194657

  1. Two-year prevalence and stability of individual DSM-IV criteria for schizotypal, borderline, avoidant, and obsessive-compulsive personality disorders: toward a hybrid model of axis II disorders.

    Science.gov (United States)

    McGlashan, Thomas H; Grilo, Carlos M; Sanislow, Charles A; Ralevski, Elizabeth; Morey, Leslie C; Gunderson, John G; Skodol, Andrew E; Shea, M Tracie; Zanarini, Mary C; Bender, Donna; Stout, Robert L; Yen, Shirley; Pagano, Maria

    2005-05-01

    This study tracked the individual criteria of four DSM-IV personality disorders-borderline, schizotypal, avoidant, and obsessive-compulsive personality disorders-and how they change over 2 years. This clinical sample of patients with personality disorders was derived from the Collaborative Longitudinal Personality Disorders Study and included all participants with borderline, schizotypal, avoidant, or obsessive-compulsive personality disorder for whom complete 24-month blind follow-up assessments were obtained (N=474). The authors identified and rank-ordered criteria for each of the four personality disorders by their variation in prevalence and changeability (remission) over time. The most prevalent and least changeable criteria over 2 years were paranoid ideation and unusual experiences for schizotypal personality disorder, affective instability and anger for borderline personality disorder, feeling inadequate and feeling socially inept for avoidant personality disorder, and rigidity and problems delegating for obsessive-compulsive personality disorder. The least prevalent and most changeable criteria were odd behavior and constricted affect for schizotypal personality disorder, self-injury and behaviors defending against abandonment for borderline personality disorder, avoiding jobs that are interpersonal and avoiding potentially embarrassing situations for avoidant personality disorder, and miserly behaviors and strict moral behaviors for obsessive-compulsive personality disorder. These patterns highlight that within personality disorders the relatively fixed criteria are more trait-like and attitudinal, whereas the relatively intermittent criteria are more behavioral and reactive. These patterns suggest that personality disorders are hybrids of traits and symptomatic behaviors and that the interaction of these elements over time helps determine diagnostic stability. These patterns may also inform criterion selection for DSM-V.

  2. Bayesian estimation of regularization parameters for deformable surface models

    Energy Technology Data Exchange (ETDEWEB)

    Cunningham, G.S.; Lehovich, A.; Hanson, K.M.

    1999-02-20

    In this article the authors build on their past attempts to reconstruct a 3D, time-varying bolus of radiotracer from first-pass data obtained by the dynamic SPECT imager, FASTSPECT, built by the University of Arizona. The object imaged is a CardioWest total artificial heart. The bolus is entirely contained in one ventricle and its associated inlet and outlet tubes. The model for the radiotracer distribution at a given time is a closed surface parameterized by 482 vertices that are connected to make 960 triangles, with nonuniform intensity variations of radiotracer allowed inside the surface on a voxel-to-voxel basis. The total curvature of the surface is minimized through the use of a weighted prior in the Bayesian framework, as is the weighted norm of the gradient of the voxellated grid. MAP estimates for the vertices, interior intensity voxels and background count level are produced. The strength of the priors, or hyperparameters, are determined by maximizing the probability of the data given the hyperparameters, called the evidence. The evidence is calculated by first assuming that the posterior is approximately normal in the values of the vertices and voxels, and then by evaluating the integral of the multi-dimensional normal distribution. This integral (which requires evaluating the determinant of a covariance matrix) is computed by applying a recent algorithm from Bai et. al. that calculates the needed determinant efficiently. They demonstrate that the radiotracer is highly inhomogeneous in early time frames, as suspected in earlier reconstruction attempts that assumed a uniform intensity of radiotracer within the closed surface, and that the optimal choice of hyperparameters is substantially different for different time frames.

  3. ENEL's DSM actions in the international scenario

    International Nuclear Information System (INIS)

    Oliva, P.; Russo, S.

    1997-01-01

    In the framework of national policies which, since the end of the 70s, have had the target of making consumers rationally use the natural sources, in particular energy, and in the pursuit of environmental goals, the Governments and the utilities have driven several DSM (Demand-Side Management) actions, in many countries. The activities implemented by ENEL have included the analysis of the different components of the energy chain, from the primary sources to the final uses in industry, agriculture, residential and commercial buildings. This is in order to improve the energy efficiency by new electrotechnologies and more effective appliances. ENEL has carried out commercial initiatives by specific contractual agreements based on the marginal costs of the electric service. The paper explains ENEL's strategies and the actions implemented by the utility on DMS; the results in terms of energy efficiency, electric demand dynamics and of load curve changing are also explained. Finally the paper explores the DSM perspectives in the Italian future scenario, where energy companies will act in a more competitive market. (author)

  4. Haptic Decorating on the Surface of Virtual Clay Model

    Directory of Open Access Journals (Sweden)

    Huang Lei

    2018-01-01

    Full Text Available A novel haptic decorating method on the surface of virtual clay model is proposed. The relationship between brush deformation and endured force is researched for the first time by applying the spring-mass model to construct the 3D brush model. Then, the collision detection between virtual hairy brush and virtual clay model is researched based on collision algorithm of weighted average distance. When the hairy brush initially collides with 3D exterior, the tactility is simulated and the interactive virtual painting on the 3D exterior is carried out practically. The 3D brush stroke is formed by superimposing 3D brush footprints along the painting direction and controlling the stress of the brush. The ink quantity in the brush footprint is determined according to the proposed positive correlation between the exerted pressure on brush and outflow ink quantity of the brush. A painting storage method is also presented for storing and displaying 3D stroke painting results. The proposed method has been successfully applied in the 3D virtual painting system based on real-time force feedback technology. With this system, the 3D brush strokes with 3D half-dry and ink diffusion results can be painted with a Phantom Desktop haptic device, which effectively enhance reality to users.

  5. Data-Model Comparison of Pliocene Sea Surface Temperature

    Science.gov (United States)

    Dowsett, H. J.; Foley, K.; Robinson, M. M.; Bloemers, J. T.

    2013-12-01

    The mid-Piacenzian (late Pliocene) climate represents the most geologically recent interval of long-term average warmth and shares similarities with the climate projected for the end of the 21st century. As such, its fossil and sedimentary record represents a natural experiment from which we can gain insight into potential climate change impacts, enabling more informed policy decisions for mitigation and adaptation. We present the first systematic comparison of Pliocene sea surface temperatures (SST) between an ensemble of eight climate model simulations produced as part of PlioMIP (Pliocene Model Intercomparison Project) and the PRISM (Pliocene Research, Interpretation and Synoptic Mapping) Project mean annual SST field. Our results highlight key regional (mid- to high latitude North Atlantic and tropics) and dynamic (upwelling) situations where there is discord between reconstructed SST and the PlioMIP simulations. These differences can lead to improved strategies for both experimental design and temporal refinement of the palaeoenvironmental reconstruction. Scatter plot of multi-model-mean anomalies (squares) and PRISM3 data anomalies (large blue circles) by latitude. Vertical bars on data anomalies represent the variability of warm climate phase within the time-slab at each locality. Small colored circles represent individual model anomalies and show the spread of model estimates about the multi-model-mean. While not directly comparable in terms of the development of the means nor the meaning of variability, this plot provides a first order comparison of the anomalies. Encircled areas are a, PRISM low latitude sites outside of upwelling areas; b, North Atlantic coastal sequences and Mediterranean sites; c, large anomaly PRISM sites from the northern hemisphere. Numbers identify Ocean Drilling Program sites.

  6. Replication of surface features from a master model to an amorphous metallic article

    Science.gov (United States)

    Johnson, William L.; Bakke, Eric; Peker, Atakan

    1999-01-01

    The surface features of an article are replicated by preparing a master model having a preselected surface feature thereon which is to be replicated, and replicating the preselected surface feature of the master model. The replication is accomplished by providing a piece of a bulk-solidifying amorphous metallic alloy, contacting the piece of the bulk-solidifying amorphous metallic alloy to the surface of the master model at an elevated replication temperature to transfer a negative copy of the preselected surface feature of the master model to the piece, and separating the piece having the negative copy of the preselected surface feature from the master model.

  7. National Estimates of Exposure to Traumatic Events and PTSD Prevalence Using DSM-IV and DSM-5 Criteria

    Science.gov (United States)

    Kilpatrick, Dean G.; Resnick, Heidi S.; Milanak, Melissa E.; Miller, Mark W.; Keyes, Katherine M.; Friedman, Matthew J.

    2014-01-01

    Prevalence of posttraumatic stress disorder (PTSD) defined according to the American Psychiatric Association’s Diagnostic and Statistical Manual fifth edition (DSM-5; 2013) and fourth edition (DSM-IV; 1994) was compared in a national sample of U.S. adults (N = 2,953) recruited from an online panel. Exposure to traumatic events, PTSD symptoms, and functional impairment were assessed online using a highly structured, self-administered survey. Traumatic event exposure using DSM-5 criteria was high (89.7%), and exposure to multiple traumatic event types was the norm. PTSD caseness was determined using Same Event (i.e., all symptom criteria met to the same event type) and Composite Event (i.e., symptom criteria met to a combination of event types) definitions. Lifetime, past-12-month, and past 6-month PTSD prevalence using the Same Event definition for DSM-5 was 8.3%, 4.7%, and 3.8% respectively. All 6 DSM-5 prevalence estimates were slightly lower than their DSM-IV counterparts, although only 2 of these differences were statistically significant. DSM-5 PTSD prevalence was higher among women than among men, and prevalence increased with greater traumatic event exposure. Major reasons individuals met DSM-IV criteria, but not DSM-5 criteria were the exclusion of nonaccidental, nonviolent deaths from Criterion A, and the new requirement of at least 1 active avoidance symptom. PMID:24151000

  8. Generalized worry disorder: a review of DSM-IV generalized anxiety disorder and options for DSM-V.

    Science.gov (United States)

    Andrews, Gavin; Hobbs, Megan J; Borkovec, Thomas D; Beesdo, Katja; Craske, Michelle G; Heimberg, Richard G; Rapee, Ronald M; Ruscio, Ayelet Meron; Stanley, Melinda A

    2010-02-01

    Generalized anxiety disorder (GAD) has undergone a series of substantial classificatory changes since its first inclusion in DSM-III. The majority of these revisions have been in response to its poor inter-rater reliability and concerns that it may lack diagnostic validity. This article provides options for the revision of the DSM-IV GAD criteria for DSM-V. First, searches were conducted to identify the evidence that previous DSM Work Groups relied upon when revising the DSM-III-R GAD and the overanxious disorder classifications. Second, the literature pertaining to the DSM-IV criteria for GAD was examined. The review presents a number of options to be considered for DSM-V. One option is for GAD to be re-labeled in DSM-V as generalized worry disorder. This would reflect its hallmark feature. Proposed revisions would result in a disorder that is characterized by excessive anxiety and worry generalized to a number of events or activities for 3 months or more. Worry acts as a cognitive coping strategy that manifests in avoidant behaviors. The reliability and validity of the proposed changes could be investigated in DSM-V validity tests and field trials.

  9. Nonlocal continuum-based modeling of breathing mode of nanowires including surface stress and surface inertia effects

    International Nuclear Information System (INIS)

    Ghavanloo, Esmaeal; Fazelzadeh, S. Ahmad; Rafii-Tabar, Hashem

    2014-01-01

    Nonlocal and surface effects significantly influence the mechanical response of nanomaterials and nanostructures. In this work, the breathing mode of a circular nanowire is studied on the basis of the nonlocal continuum model. Both the surface elastic properties and surface inertia effect are included. Nanowires can be modeled as long cylindrical solid objects. The classical model is reformulated using the nonlocal differential constitutive relations of Eringen and Gurtin–Murdoch surface continuum elasticity formalism. A new frequency equation for the breathing mode of nanowires, including small scale effect, surface stress and surface inertia is presented by employing the Bessel functions. Numerical results are computed, and are compared to confirm the validity and accuracy of the proposed method. Furthermore, the model is used to elucidate the effect of nonlocal parameter, the surface stress, the surface inertia and the nanowire orientation on the breathing mode of several types of nanowires with size ranging from 0.5 to 4 nm. Our results reveal that the combined surface and small scale effects are significant for nanowires with diameter smaller than 4 nm.

  10. Nonlocal continuum-based modeling of breathing mode of nanowires including surface stress and surface inertia effects

    Science.gov (United States)

    Ghavanloo, Esmaeal; Fazelzadeh, S. Ahmad; Rafii-Tabar, Hashem

    2014-05-01

    Nonlocal and surface effects significantly influence the mechanical response of nanomaterials and nanostructures. In this work, the breathing mode of a circular nanowire is studied on the basis of the nonlocal continuum model. Both the surface elastic properties and surface inertia effect are included. Nanowires can be modeled as long cylindrical solid objects. The classical model is reformulated using the nonlocal differential constitutive relations of Eringen and Gurtin-Murdoch surface continuum elasticity formalism. A new frequency equation for the breathing mode of nanowires, including small scale effect, surface stress and surface inertia is presented by employing the Bessel functions. Numerical results are computed, and are compared to confirm the validity and accuracy of the proposed method. Furthermore, the model is used to elucidate the effect of nonlocal parameter, the surface stress, the surface inertia and the nanowire orientation on the breathing mode of several types of nanowires with size ranging from 0.5 to 4 nm. Our results reveal that the combined surface and small scale effects are significant for nanowires with diameter smaller than 4 nm.

  11. Reinforcement Toolbox, a Parametric Reinforcement Modelling Tool for Curved Surface Structures

    NARCIS (Netherlands)

    Lauppe, J.; Rolvink, A.; Coenders, J.L.

    2013-01-01

    This paper presents a computational strategy and parametric modelling toolbox which aim at enhancing the design- and production process of reinforcement in freeform curved surface structures. The computational strategy encompasses the necessary steps of raising an architectural curved surface model

  12. Examination of the Section III DSM-5 diagnostic system for personality disorders in an outpatient clinical sample.

    Science.gov (United States)

    Few, Lauren R; Miller, Joshua D; Rothbaum, Alex O; Meller, Suzanne; Maples, Jessica; Terry, Douglas P; Collins, Brittany; MacKillop, James

    2013-11-01

    The Diagnostic and Statistical Manual of Mental Disorders (5th ed.; DSM-5; American Psychiatric Association, 2013), includes a novel approach to the diagnosis of personality disorders (PDs) in Section III, to stimulate further research with the possibility that this proposal will be included more formally in future DSM iterations. This study provides the 1st test of this proposal in a clinical sample by simultaneously examining its 2 primary components: a system for rating personality impairment and a newly developed dimensional model of pathological personality traits. Participants were community adults currently receiving outpatient mental health treatment who completed a semistructured interview for DSM-IV PDs and were then rated in terms of personality impairment and pathological traits. Data on the pathological traits were also collected through self-reports using the Personality Inventory for DSM-5 (PID-5). Both sets of trait scores were compared with self-report measures of general personality traits, internalizing symptoms, and externalizing behaviors. Interrater reliabilities for the clinicians' ratings of impairment and the pathological traits were fair. The impairment ratings manifested substantial correlations with symptoms of depression and anxiety, DSM-5 PDs, and DSM-5 pathological traits. The clinician and self-reported personality trait scores demonstrated good convergence with one another, both accounted for substantial variance in DSM-IV PD constructs, and both manifested expected relations with the external criteria. The traits but not the impairment ratings demonstrated incremental validity in the prediction of the DSM-IV PDs. Overall, these results support the general validity of several of the components of this new PD diagnostic system and point to areas that may require further modification. PsycINFO Database Record (c) 2013 APA, all rights reserved.

  13. Examination of the Section III DSM-5 diagnostic system for personality disorders in an outpatient clinical sample

    Science.gov (United States)

    Few, Lauren R.; Miller, Joshua D.; Rothbaum, Alex; Meller, Suzanne; Maples, Jessica; Terry, Douglas P.; Collins, Brittany; MacKillop, James

    2014-01-01

    The DSM-5 includes a novel approach to the diagnosis of personality disorders (PDs) in Section III, in order to stimulate further research with the possibility that this proposal will be included more formally in future DSM iterations. The current study provides the first test of this proposal in a clinical sample by simultaneously examining its two primary components: a system for rating personality impairment and a newly developed dimensional model of pathological personality traits. Participants were community adults currently receiving outpatient mental health treatment who completed a semi-structured interview for DSM-IV PDs and were then rated in terms of personality impairment and pathological traits. Data on the pathological traits were also collected via self-reports using the Personality Inventory for DSM-5 (PID-5). Both sets of trait scores were compared to self-report measures of general personality traits, internalizing symptoms, and externalizing behaviors. Inter-rater reliabilities for the clinicians’ ratings of impairment and the pathological traits were fair. The impairment ratings manifested substantial correlations with symptoms of depression and anxiety, DSM-5 PDs, and DSM-5 pathological traits. The clinician and self-reported personality trait scores demonstrated good convergence with one another, both accounted for substantial variance in DSM-IV PD constructs, and both manifested expected relations with the external criteria. The traits but not the impairment ratings demonstrated incremental validity in the prediction of the DSM-IV PDs. Overall, the current results support the general validity of several of the components of this new PD diagnostic system and point to areas that may require further modification. PMID:24364607

  14. Development and psychometric analysis of the Brief DSM-5 Alcohol Use Disorder Diagnostic Assessment: Towards effective diagnosis in college students.

    Science.gov (United States)

    Hagman, Brett T

    2017-11-01

    The Diagnostic and Statistical Manual of Mental Disorders (5th edition) Alcohol Use Disorder (DSM-5 AUD) criteria have been modified to reflect a single, continuous disorder. It is critical that we develop brief assessment measures that can accurately assess for DSM-5 AUD criteria in college students to assist in screening, referral, and brief intervention services implemented on college campuses. The present study sought to develop and assess for the psychometric properties of a brief 13-item measure designed to capture the full spectrum of the DSM-5 AUD criteria in a sample of college students. Participants were past-year drinkers (N = 923) between the ages of 18 to 30 enrolled at 3 universities. Respondents completed a 30-min anonymous battery of questionnaires online. The Brief DSM-5 AUD Assessment consisted of 13 items designed to reflect the DSM-5 AUD criteria. Results indicated a high degree of internal consistency reliability with high item-to-scale correlations. Confirmatory factor analyses indicated that a dominant single factor emerged with good model fit. The Item Response Theory (IRT) analyses indicated that the difficulty parameters for each criterion were intermixed along the upper portion of the underlying AUD severity continuum, and the discrimination parameters were all high. Additional analysis indicated that those with a DSM-5 AUD had greater levels of alcohol and other drug use and problem severity in comparison to those without a DSM-5 AUD. Study findings provide empirical support for the reliability and validity of the Brief 13-item DSM-5 Assessment. It should be routinely included into research and clinical practice efforts. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  15. Forest inventory with LiDAR and stereo DSM on Washington department of natural resources lands

    Science.gov (United States)

    Jacob L. Strunk; Peter J. Gould

    2015-01-01

    DNR’s forest inventory group has completed its first version of a new remote-sensing based forest inventory system covering 1.4 million acres of DNR forest lands. We use a combination of field plots, lidar, NAIP, and a NAIP-derived canopy surface DSM. Given that height drives many key inventory variables (e.g. height, volume, biomass, carbon), remote-sensing derived...

  16. Structure of the DSM-5 generalized anxiety disorder criteria among a large community sample of worriers.

    Science.gov (United States)

    Hobbs, Megan J; Anderson, Tracy M; Slade, Tim; Andrews, Gavin

    2014-03-01

    There is growing empirical and clinical consensus that many psychiatric disorders are continuous in nature. The DSM-5 however makes a categorical distinction between subthreshold and threshold cases of generalized anxiety disorder (GAD). This study tested the a priori assumption that the DSM-5 criteria identify a break in psychopathology between subthreshold and threshold cases of GAD. Respondents of the 2007 National Survey of Mental Health and Well Being who self-identified as worriers were selected for analyses (n=1738). The GAD criteria were assessed using the World Mental Health version of the Composite International Diagnostic Interview. Item response, latent class and factor mixture models were estimated to assess the structure of the GAD criteria. The relative fit of the latent variable models suggested that a single continuous factor explains the way that worriers endorse the GAD criteria. However, the similar psychometric properties of the GAD criteria suggested that the GAD criteria impose a relatively finite threshold over this dimension of severity. Although these structural analyses did not identify a break in psychopathology between subthreshold and threshold cases of GAD based on the way that respondents endorsed the DSM-5 criteria, it is possible that structural analyses of risk factors and other clinical correlates of GAD may identify such a break in the future. These data suggest that the DSM-5 GAD criteria lend themselves to making both categorical decisions about cases as well as being indices of a continuum of severity. Copyright © 2014 Elsevier B.V. All rights reserved.

  17. Gambling disorder, DSM-5 criteria and symptom severity

    DEFF Research Database (Denmark)

    Grant, Jon E.; Odlaug, Brian L.; Chamberlain, Samuel R.

    2017-01-01

    Introduction: Gambling disorder (GD) is a prevalent psychiatric condition whose severity is typically defined by the number of DSM-5 criteria met out of a maximum of nine. The relationships between the levels of gambling severity, thus defined, and other measures of psychopathology and everyday...... of variance models. Results: The sample included 574 adults with GD, of whom 73 (12.7%) had mild, 184 (32.1%) moderate, and 317 (55.2%) severe GD. The moderate and severe cases, compared to mild severity group tended be older, had later age of onset, lost more money to gambling in the preceding year, had...... for Pathological Gambling (PG-YBOCS) discriminated significantly between all three groups. Conclusions: Several measures of psychopathology and functional impact of gambling symptoms appear similar between moderate and severe GD cases, while mild cases are clearly differentiated from moderate and severe cases...

  18. Surface system Forsmark. Site descriptive modelling SDM-Site Forsmark

    International Nuclear Information System (INIS)

    Lindborg, Tobias

    2008-12-01

    SKB has undertaken site characterization of two different areas, Forsmark and Laxemar-Simpevarp, in order to find a suitable location for a geological repository for spent nuclear fuel. This report focuses on the site descriptive modelling of the surface system at Forsmark. The characterization of the surface system at the site was primarily made by identifying and describing important properties in different parts of the surface system, properties concerning e.g. hydrology and climate, Quaternary deposits and soils, hydrochemistry, vegetation, ecosystem functions, but also current and historical land use. The report presents available input data, methodology for data evaluation and modelling, and resulting models for each of the different disciplines. Results from the modelling of the surface system are also integrated with results from modelling of the deep bedrock system. The Forsmark site is located within the municipality of Oesthammar, about 120 km north of Stockholm. The investigated area is located along the shoreline of Oeregrundsgrepen, a funnel-shaped bay of the Baltic Sea. The area is characterized by small-scale topographic variations and is almost entirely located at altitudes lower than 20 metres above sea level. The Quaternary deposits in the area are dominated by till, characterized by a rich content of calcite which was transported by the glacier ice to the area from the sedimentary bedrock of Gaevlebukten about 100 km north of Forsmark. As a result, the surface waters and shallow groundwater at Forsmark are characterized by high pH values and high concentrations of certain major constituents, especially calcium and bicarbonate. The annual precipitation and runoff are 560 and 150 mm, respectively. The lakes are small and shallow, with mean and maximum depths ranging from approximately 0.1 to 1 m and 0.4 to 2 m. Sea water flows into the most low-lying lakes during events giving rise to very high sea levels. Wetlands are frequent and cover 25 to 35

  19. Modeling adsorption and reactions of organic molecules at metal surfaces.

    Science.gov (United States)

    Liu, Wei; Tkatchenko, Alexandre; Scheffler, Matthias

    2014-11-18

    CONSPECTUS: The understanding of adsorption and reactions of (large) organic molecules at metal surfaces plays an increasingly important role in modern surface science and technology. Such hybrid inorganic/organic systems (HIOS) are relevant for many applications in catalysis, light-emitting diodes, single-molecule junctions, molecular sensors and switches, and photovoltaics. Obviously, the predictive modeling and understanding of the structure and stability of such hybrid systems is an essential prerequisite for tuning their electronic properties and functions. At present, density-functional theory (DFT) is the most promising approach to study the structure, stability, and electronic properties of complex systems, because it can be applied to both molecules and solids comprising thousands of atoms. However, state-of-the-art approximations to DFT do not provide a consistent and reliable description for HIOS, which is largely due to two issues: (i) the self-interaction of the electrons with themselves arising from the Hartree term of the total energy that is not fully compensated in approximate exchange-correlation functionals, and (ii) the lack of long-range part of the ubiquitous van der Waals (vdW) interactions. The self-interaction errors sometimes lead to incorrect description of charge transfer and electronic level alignment in HIOS, although for molecules adsorbed on metals these effects will often cancel out in total energy differences. Regarding vdW interactions, several promising vdW-inclusive DFT-based methods have been recently demonstrated to yield remarkable accuracy for intermolecular interactions in the gas phase. However, the majority of these approaches neglect the nonlocal collective electron response in the vdW energy tail, an effect that is particularly strong in condensed phases and at interfaces between different materials. Here we show that the recently developed DFT+vdW(surf) method that accurately accounts for the collective electronic

  20. Adaptive Surface Modeling of Soil Properties in Complex Landforms

    Directory of Open Access Journals (Sweden)

    Wei Liu

    2017-06-01

    Full Text Available Abstract: Spatial discontinuity often causes poor accuracy when a single model is used for the surface modeling of soil properties in complex geomorphic areas. Here we present a method for adaptive surface modeling of combined secondary variables to improve prediction accuracy during the interpolation of soil properties (ASM-SP. Using various secondary variables and multiple base interpolation models, ASM-SP was used to interpolate soil K+ in a typical complex geomorphic area (Qinghai Lake Basin, China. Five methods, including inverse distance weighting (IDW, ordinary kriging (OK, and OK combined with different secondary variables (e.g., OK-Landuse, OK-Geology, and OK-Soil, were used to validate the proposed method. The mean error (ME, mean absolute error (MAE, root mean square error (RMSE, mean relative error (MRE, and accuracy (AC were used as evaluation indicators. Results showed that: (1 The OK interpolation result is spatially smooth and has a weak bull's-eye effect, and the IDW has a stronger ‘bull’s-eye’ effect, relatively. They both have obvious deficiencies in depicting spatial variability of soil K+. (2 The methods incorporating combinations of different secondary variables (e.g., ASM-SP, OK-Landuse, OK-Geology, and OK-Soil were associated with lower estimation bias. Compared with IDW, OK, OK-Landuse, OK-Geology, and OK-Soil, the accuracy of ASM-SP increased by 13.63%, 10.85%, 9.98%, 8.32%, and 7.66%, respectively. Furthermore, ASM-SP was more stable, with lower MEs, MAEs, RMSEs, and MREs. (3 ASM-SP presents more details than others in the abrupt boundary, which can render the result consistent with the true secondary variables. In conclusion, ASM-SP can not only consider the nonlinear relationship between secondary variables and soil properties, but can also adaptively combine the advantages of multiple models, which contributes to making the spatial interpolation of soil K+ more reasonable.